summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel/e1000e/ich8lan.c
diff options
context:
space:
mode:
authorBruce Allan <bruce.w.allan@intel.com>2012-04-13 03:16:22 +0000
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2012-05-02 01:58:45 -0700
commitcb17aab916b0467faecf241c9b3b396b6da045d9 (patch)
treebdfb68caca112d9bc2408cd7edcf651356d16508 /drivers/net/ethernet/intel/e1000e/ich8lan.c
parent62bc813e48aef39c187bb426ddd5441862f1d8d1 (diff)
e1000e: PHY initialization flow changes for 82577/8/9
The PHY initialization flows and assorted workarounds for 82577/8/9 done during driver load and resume from Sx should be the same yet they are not. Combine the current flows/workarounds into a common set of functions that are called during the different code paths. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.c')
-rw-r--r--drivers/net/ethernet/intel/e1000e/ich8lan.c247
1 files changed, 146 insertions, 101 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.c b/drivers/net/ethernet/intel/e1000e/ich8lan.c
index 2506ee275312..4c8b0fb6534f 100644
--- a/drivers/net/ethernet/intel/e1000e/ich8lan.c
+++ b/drivers/net/ethernet/intel/e1000e/ich8lan.c
@@ -287,25 +287,126 @@ static inline void __ew32flash(struct e1000_hw *hw, unsigned long reg, u32 val)
#define ew16flash(reg, val) __ew16flash(hw, (reg), (val))
#define ew32flash(reg, val) __ew32flash(hw, (reg), (val))
-static void e1000_toggle_lanphypc_value_ich8lan(struct e1000_hw *hw)
+/**
+ * e1000_phy_is_accessible_pchlan - Check if able to access PHY registers
+ * @hw: pointer to the HW structure
+ *
+ * Test access to the PHY registers by reading the PHY ID registers. If
+ * the PHY ID is already known (e.g. resume path) compare it with known ID,
+ * otherwise assume the read PHY ID is correct if it is valid.
+ *
+ * Assumes the sw/fw/hw semaphore is already acquired.
+ **/
+static bool e1000_phy_is_accessible_pchlan(struct e1000_hw *hw)
{
- u32 reg;
+ u16 phy_reg;
+ u32 phy_id;
- /* Set Phy Config Counter to 50msec */
- reg = er32(FEXTNVM3);
- reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
- reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
- ew32(FEXTNVM3, reg);
-
- /* Toggle LANPHYPC Value bit */
- reg = er32(CTRL);
- reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
- reg &= ~E1000_CTRL_LANPHYPC_VALUE;
- ew32(CTRL, reg);
- e1e_flush();
- udelay(10);
- reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
- ew32(CTRL, reg);
+ hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_reg);
+ phy_id = (u32)(phy_reg << 16);
+ hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_reg);
+ phy_id |= (u32)(phy_reg & PHY_REVISION_MASK);
+
+ if (hw->phy.id) {
+ if (hw->phy.id == phy_id)
+ return true;
+ } else {
+ if ((phy_id != 0) && (phy_id != PHY_REVISION_MASK))
+ hw->phy.id = phy_id;
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * e1000_init_phy_workarounds_pchlan - PHY initialization workarounds
+ * @hw: pointer to the HW structure
+ *
+ * Workarounds/flow necessary for PHY initialization during driver load
+ * and resume paths.
+ **/
+static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
+{
+ u32 mac_reg, fwsm = er32(FWSM);
+ s32 ret_val;
+
+ ret_val = hw->phy.ops.acquire(hw);
+ if (ret_val) {
+ e_dbg("Failed to initialize PHY flow\n");
+ return ret_val;
+ }
+
+ /*
+ * The MAC-PHY interconnect may be in SMBus mode. If the PHY is
+ * inaccessible and resetting the PHY is not blocked, toggle the
+ * LANPHYPC Value bit to force the interconnect to PCIe mode.
+ */
+ switch (hw->mac.type) {
+ case e1000_pch2lan:
+ /*
+ * Gate automatic PHY configuration by hardware on
+ * non-managed 82579
+ */
+ if (!(fwsm & E1000_ICH_FWSM_FW_VALID))
+ e1000_gate_hw_phy_config_ich8lan(hw, true);
+
+ if (e1000_phy_is_accessible_pchlan(hw))
+ break;
+
+ /* fall-through */
+ case e1000_pchlan:
+ if ((hw->mac.type == e1000_pchlan) &&
+ (fwsm & E1000_ICH_FWSM_FW_VALID))
+ break;
+
+ if (hw->phy.ops.check_reset_block(hw)) {
+ e_dbg("Required LANPHYPC toggle blocked by ME\n");
+ break;
+ }
+
+ e_dbg("Toggling LANPHYPC\n");
+
+ /* Set Phy Config Counter to 50msec */
+ mac_reg = er32(FEXTNVM3);
+ mac_reg &= ~E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK;
+ mac_reg |= E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC;
+ ew32(FEXTNVM3, mac_reg);
+
+ /* Toggle LANPHYPC Value bit */
+ mac_reg = er32(CTRL);
+ mac_reg |= E1000_CTRL_LANPHYPC_OVERRIDE;
+ mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ udelay(10);
+ mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
+ ew32(CTRL, mac_reg);
+ e1e_flush();
+ msleep(50);
+ break;
+ default:
+ break;
+ }
+
+ hw->phy.ops.release(hw);
+
+ /*
+ * Reset the PHY before any access to it. Doing so, ensures
+ * that the PHY is in a known good state before we read/write
+ * PHY registers. The generic reset is sufficient here,
+ * because we haven't determined the PHY type yet.
+ */
+ ret_val = e1000e_phy_hw_reset_generic(hw);
+
+ /* Ungate automatic PHY configuration on non-managed 82579 */
+ if ((hw->mac.type == e1000_pch2lan) &&
+ !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
+ usleep_range(10000, 20000);
+ e1000_gate_hw_phy_config_ich8lan(hw, false);
+ }
+
+ return ret_val;
}
/**
@@ -335,65 +436,34 @@ static s32 e1000_init_phy_params_pchlan(struct e1000_hw *hw)
phy->ops.power_down = e1000_power_down_phy_copper_ich8lan;
phy->autoneg_mask = AUTONEG_ADVERTISE_SPEED_DEFAULT;
- if (!hw->phy.ops.check_reset_block(hw)) {
- u32 fwsm = er32(FWSM);
-
- /*
- * The MAC-PHY interconnect may still be in SMBus mode after
- * Sx->S0. If resetting the PHY is not blocked, toggle the
- * LANPHYPC Value bit to force the interconnect to PCIe mode.
- */
- e1000_toggle_lanphypc_value_ich8lan(hw);
- msleep(50);
-
- /*
- * Gate automatic PHY configuration by hardware on
- * non-managed 82579
- */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(fwsm & E1000_ICH_FWSM_FW_VALID))
- e1000_gate_hw_phy_config_ich8lan(hw, true);
-
- /*
- * Reset the PHY before any access to it. Doing so, ensures
- * that the PHY is in a known good state before we read/write
- * PHY registers. The generic reset is sufficient here,
- * because we haven't determined the PHY type yet.
- */
- ret_val = e1000e_phy_hw_reset_generic(hw);
- if (ret_val)
- return ret_val;
+ phy->id = e1000_phy_unknown;
- /* Ungate automatic PHY configuration on non-managed 82579 */
- if ((hw->mac.type == e1000_pch2lan) &&
- !(fwsm & E1000_ICH_FWSM_FW_VALID)) {
- usleep_range(10000, 20000);
- e1000_gate_hw_phy_config_ich8lan(hw, false);
- }
- }
+ ret_val = e1000_init_phy_workarounds_pchlan(hw);
+ if (ret_val)
+ return ret_val;
- phy->id = e1000_phy_unknown;
- switch (hw->mac.type) {
- default:
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- return ret_val;
- if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+ if (phy->id == e1000_phy_unknown)
+ switch (hw->mac.type) {
+ default:
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
+ if ((phy->id != 0) && (phy->id != PHY_REVISION_MASK))
+ break;
+ /* fall-through */
+ case e1000_pch2lan:
+ /*
+ * In case the PHY needs to be in mdio slow mode,
+ * set slow mode and try to get the PHY id again.
+ */
+ ret_val = e1000_set_mdio_slow_mode_hv(hw);
+ if (ret_val)
+ return ret_val;
+ ret_val = e1000e_get_phy_id(hw);
+ if (ret_val)
+ return ret_val;
break;
- /* fall-through */
- case e1000_pch2lan:
- /*
- * In case the PHY needs to be in mdio slow mode,
- * set slow mode and try to get the PHY id again.
- */
- ret_val = e1000_set_mdio_slow_mode_hv(hw);
- if (ret_val)
- return ret_val;
- ret_val = e1000e_get_phy_id(hw);
- if (ret_val)
- return ret_val;
- break;
- }
+ }
phy->type = e1000e_get_phy_type_from_id(phy->id);
switch (phy->type) {
@@ -3736,41 +3806,16 @@ void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw)
**/
void e1000_resume_workarounds_pchlan(struct e1000_hw *hw)
{
- u16 phy_id1, phy_id2;
s32 ret_val;
- if ((hw->mac.type != e1000_pch2lan) ||
- hw->phy.ops.check_reset_block(hw))
+ if (hw->mac.type < e1000_pch2lan)
return;
- ret_val = hw->phy.ops.acquire(hw);
+ ret_val = e1000_init_phy_workarounds_pchlan(hw);
if (ret_val) {
- e_dbg("Failed to acquire PHY semaphore in resume\n");
+ e_dbg("Failed to init PHY flow ret_val=%d\n", ret_val);
return;
}
-
- /* Test access to the PHY registers by reading the ID regs */
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID1, &phy_id1);
- if (ret_val)
- goto release;
- ret_val = hw->phy.ops.read_reg_locked(hw, PHY_ID2, &phy_id2);
- if (ret_val)
- goto release;
-
- if (hw->phy.id == ((u32)(phy_id1 << 16) |
- (u32)(phy_id2 & PHY_REVISION_MASK)))
- goto release;
-
- e1000_toggle_lanphypc_value_ich8lan(hw);
-
- hw->phy.ops.release(hw);
- msleep(50);
- e1000_phy_hw_reset(hw);
- msleep(50);
- return;
-
-release:
- hw->phy.ops.release(hw);
}
/**