wl1271: add wl1271 driver files

This driver supports the wl1271 chipset from Texas Instruments based on the
WiLink(tm) 6.0 mobile platform.  Support for wl1273 should be relatively easy
to add.  This chipset is designed for embedded devices, with good powersaving
capabilities.  The wl1271 chipset is the successor of wl1251 and supports the
802.11b/g/n standards, but currently this driver supports only b/g.

More information about this chipset can be found here:
http://focus.ti.com/general/docs/wtbu/wtbuproductcontent.tsp?templateId=6123&navigationId=12762&contentId=29993

Signed-off-by: Luciano Coelho <luciano.coelho@nokia.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>

1 files changed, 200 insertions, 0 deletions

diff --git a/drivers/net/wireless/wl12xx/wl1271_rx.c b/drivers/net/wireless/wl12xx/wl1271_rx.c
new file mode 100644
index 000000000000..ad8b6904c5eb
--- /dev/null
+++ b/drivers/net/wireless/wl12xx/wl1271_rx.c
@@ -0,0 +1,200 @@
+/*
+ * This file is part of wl1271
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * Contact: Luciano Coelho <luciano.coelho@nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#include "wl1271.h"
+#include "wl1271_acx.h"
+#include "wl1271_reg.h"
+#include "wl1271_rx.h"
+#include "wl1271_spi.h"
+
+static u8 wl1271_rx_get_mem_block(struct wl1271_fw_status *status,
+				  u32 drv_rx_counter)
+{
+	return status->rx_pkt_descs[drv_rx_counter] & RX_MEM_BLOCK_MASK;
+}
+
+static u32 wl1271_rx_get_buf_size(struct wl1271_fw_status *status,
+				 u32 drv_rx_counter)
+{
+	return (status->rx_pkt_descs[drv_rx_counter] & RX_BUF_SIZE_MASK) >>
+		RX_BUF_SIZE_SHIFT_DIV;
+}
+
+/* The values of this table must match the wl1271_rates[] array */
+static u8 wl1271_rx_rate_to_idx[] = {
+	/* MCS rates are used only with 11n */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS7 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS6 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS5 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS4 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS3 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS2 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS1 */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_MCS0 */
+
+	11,                         /* WL1271_RATE_54   */
+	10,                         /* WL1271_RATE_48   */
+	9,                          /* WL1271_RATE_36   */
+	8,                          /* WL1271_RATE_24   */
+
+	/* TI-specific rate */
+	WL1271_RX_RATE_UNSUPPORTED, /* WL1271_RATE_22   */
+
+	7,                          /* WL1271_RATE_18   */
+	6,                          /* WL1271_RATE_12   */
+	3,                          /* WL1271_RATE_11   */
+	5,                          /* WL1271_RATE_9    */
+	4,                          /* WL1271_RATE_6    */
+	2,                          /* WL1271_RATE_5_5  */
+	1,                          /* WL1271_RATE_2    */
+	0                           /* WL1271_RATE_1    */
+};
+
+static void wl1271_rx_status(struct wl1271 *wl,
+			     struct wl1271_rx_descriptor *desc,
+			     struct ieee80211_rx_status *status,
+			     u8 beacon)
+{
+	memset(status, 0, sizeof(struct ieee80211_rx_status));
+
+	if ((desc->flags & WL1271_RX_DESC_BAND_MASK) == WL1271_RX_DESC_BAND_BG)
+		status->band = IEEE80211_BAND_2GHZ;
+	else
+		wl1271_warning("unsupported band 0x%x",
+			       desc->flags & WL1271_RX_DESC_BAND_MASK);
+
+	/*
+	 * FIXME: Add mactime handling.  For IBSS (ad-hoc) we need to get the
+	 * timestamp from the beacon (acx_tsf_info).  In BSS mode (infra) we
+	 * only need the mactime for monitor mode.  For now the mactime is
+	 * not valid, so RX_FLAG_TSFT should not be set
+	 */
+	status->signal = desc->rssi;
+
+	/* FIXME: Should this be optimized? */
+	status->qual = (desc->rssi - WL1271_RX_MIN_RSSI) * 100 /
+		(WL1271_RX_MAX_RSSI - WL1271_RX_MIN_RSSI);
+	status->qual = min(status->qual, 100);
+	status->qual = max(status->qual, 0);
+
+	/*
+	 * FIXME: In wl1251, the SNR should be divided by two.  In wl1271 we
+	 * need to divide by two for now, but TI has been discussing about
+	 * changing it.  This needs to be rechecked.
+	 */
+	status->noise = desc->rssi - (desc->snr >> 1);
+
+	status->freq = ieee80211_channel_to_frequency(desc->channel);
+
+	if (desc->flags & WL1271_RX_DESC_ENCRYPT_MASK) {
+		status->flag |= RX_FLAG_IV_STRIPPED | RX_FLAG_MMIC_STRIPPED;
+
+		if (likely(!(desc->flags & WL1271_RX_DESC_DECRYPT_FAIL)))
+			status->flag |= RX_FLAG_DECRYPTED;
+
+		if (unlikely(desc->flags & WL1271_RX_DESC_MIC_FAIL))
+			status->flag |= RX_FLAG_MMIC_ERROR;
+	}
+
+	status->rate_idx = wl1271_rx_rate_to_idx[desc->rate];
+
+	if (status->rate_idx == WL1271_RX_RATE_UNSUPPORTED)
+		wl1271_warning("unsupported rate");
+}
+
+static void wl1271_rx_handle_data(struct wl1271 *wl, u32 length)
+{
+	struct ieee80211_rx_status rx_status;
+	struct wl1271_rx_descriptor *desc;
+	struct sk_buff *skb;
+	u16 *fc;
+	u8 *buf;
+	u8 beacon = 0;
+
+	skb = dev_alloc_skb(length);
+	if (!skb) {
+		wl1271_error("Couldn't allocate RX frame");
+		return;
+	}
+
+	buf = skb_put(skb, length);
+	wl1271_spi_reg_read(wl, WL1271_SLV_MEM_DATA, buf, length, true);
+
+	/* the data read starts with the descriptor */
+	desc = (struct wl1271_rx_descriptor *) buf;
+
+	/* now we pull the descriptor out of the buffer */
+	skb_pull(skb, sizeof(*desc));
+
+	fc = (u16 *)skb->data;
+	if ((*fc & IEEE80211_FCTL_STYPE) == IEEE80211_STYPE_BEACON)
+		beacon = 1;
+
+	wl1271_rx_status(wl, desc, &rx_status, beacon);
+
+	wl1271_debug(DEBUG_RX, "rx skb 0x%p: %d B %s", skb, skb->len,
+		     beacon ? "beacon" : "");
+
+	memcpy(IEEE80211_SKB_RXCB(skb), &rx_status, sizeof(rx_status));
+	ieee80211_rx(wl->hw, skb);
+}
+
+void wl1271_rx(struct wl1271 *wl, struct wl1271_fw_status *status)
+{
+	struct wl1271_acx_mem_map *wl_mem_map = wl->target_mem_map;
+	u32 buf_size;
+	u32 fw_rx_counter  = status->fw_rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+	u32 drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+	u32 mem_block;
+
+	while (drv_rx_counter != fw_rx_counter) {
+		mem_block = wl1271_rx_get_mem_block(status, drv_rx_counter);
+		buf_size = wl1271_rx_get_buf_size(status, drv_rx_counter);
+
+		if (buf_size == 0) {
+			wl1271_warning("received empty data");
+			break;
+		}
+
+		wl->rx_mem_pool_addr.addr =
+			(mem_block << 8) + wl_mem_map->packet_memory_pool_start;
+		wl->rx_mem_pool_addr.addr_extra =
+			wl->rx_mem_pool_addr.addr + 4;
+
+		/* Choose the block we want to read */
+		wl1271_spi_reg_write(wl, WL1271_SLV_REG_DATA,
+				     &wl->rx_mem_pool_addr,
+				     sizeof(wl->rx_mem_pool_addr), false);
+
+		wl1271_rx_handle_data(wl, buf_size);
+
+		wl->rx_counter++;
+		drv_rx_counter = wl->rx_counter & NUM_RX_PKT_DESC_MOD_MASK;
+	}
+
+	wl1271_reg_write32(wl, RX_DRIVER_COUNTER_ADDRESS, wl->rx_counter);
+
+	/* This is a workaround for some problems in the chip */
+	wl1271_reg_write32(wl, RX_DRIVER_DUMMY_WRITE_ADDRESS, 0x1);
+
+}