Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI updates from James Bottomley:
 "Updates to the usual drivers (ufs, qla2xx, target, lpfc, smartpqi,
  mpi3mr).

  The main driver change that might cause issues on down the road is the
  conversion of some of our oldest surviving drivers to the DMA API
  (should only affect m68k).

  The only major core change is the rework of async resume; the rest are
  either completely trivial or for updating deprecated APIs"

* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (195 commits)
  scsi: target: Remove XDWRITEREAD emulated support
  scsi: megaraid: Remove the static variable initialisation
  scsi: ch: Do not initialise statics to 0
  scsi: ufs: core: Fix spelling mistake "Cannnot" -> "Cannot"
  scsi: target: iscsi: Do not require target authentication
  scsi: target: iscsi: Allow AuthMethod=None
  scsi: target: iscsi: Support base64 in CHAP
  scsi: target: iscsi: Add support for extended CDB AHS
  scsi: ufs: dt-bindings: Add SC8280XP binding
  scsi: target: iscsi: Fix clang -Wformat warnings
  scsi: ufs: core: Read device property for ref clock
  scsi: libsas: Resume SAS host for phy reset or enable via sysfs
  scsi: hisi_sas: Modify v3 HW SATA completion error processing
  scsi: hisi_sas: Relocate DMA unmap of SMP task
  scsi: hisi_sas: Remove unnecessary variable to hold DMA map elements
  scsi: hisi_sas: Call hisi_sas_slave_configure() from slave_configure_v3_hw()
  scsi: mpi3mr: Delete a stray tab
  scsi: mpi3mr: Unlock on error path
  scsi: mpi3mr: Reduce VD queue depth on detecting throttling
  scsi: mpi3mr: Resource Based Metering
  ...

1 files changed, 44 insertions, 9 deletions

diff --git a/drivers/scsi/a3000.c b/drivers/scsi/a3000.c
index dd161885eed1..2c5cb1a02e86 100644
--- a/drivers/scsi/a3000.c
+++ b/drivers/scsi/a3000.c
@@ -7,6 +7,7 @@
 #include <linux/spinlock.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
 #include <linux/module.h>
 
 #include <asm/page.h>
@@ -25,8 +26,11 @@
 struct a3000_hostdata {
 	struct WD33C93_hostdata wh;
 	struct a3000_scsiregs *regs;
+	struct device *dev;
 };
 
+#define DMA_DIR(d)   ((d == DATA_OUT_DIR) ? DMA_TO_DEVICE : DMA_FROM_DEVICE)
+
 static irqreturn_t a3000_intr(int irq, void *data)
 {
 	struct Scsi_Host *instance = data;
@@ -49,20 +53,38 @@ static irqreturn_t a3000_intr(int irq, void *data)
 static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 {
 	struct scsi_pointer *scsi_pointer = WD33C93_scsi_pointer(cmd);
+	unsigned long len = scsi_pointer->this_residual;
 	struct Scsi_Host *instance = cmd->device->host;
 	struct a3000_hostdata *hdata = shost_priv(instance);
 	struct WD33C93_hostdata *wh = &hdata->wh;
 	struct a3000_scsiregs *regs = hdata->regs;
 	unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
-	unsigned long addr = virt_to_bus(scsi_pointer->ptr);
+	dma_addr_t addr;
+
+	addr = dma_map_single(hdata->dev, scsi_pointer->ptr,
+			      len, DMA_DIR(dir_in));
+	if (dma_mapping_error(hdata->dev, addr)) {
+		dev_warn(hdata->dev, "cannot map SCSI data block %p\n",
+			 scsi_pointer->ptr);
+		return 1;
+	}
+	scsi_pointer->dma_handle = addr;
 
 	/*
 	 * if the physical address has the wrong alignment, or if
 	 * physical address is bad, or if it is a write and at the
 	 * end of a physical memory chunk, then allocate a bounce
 	 * buffer
+	 * MSch 20220629 - only wrong alignment tested - bounce
+	 * buffer returned by kmalloc is guaranteed to be aligned
 	 */
 	if (addr & A3000_XFER_MASK) {
+		WARN_ONCE(1, "Invalid alignment for DMA!");
+		/* drop useless mapping */
+		dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
+				 scsi_pointer->this_residual,
+				 DMA_DIR(dir_in));
+
 		wh->dma_bounce_len = (scsi_pointer->this_residual + 511) & ~0x1ff;
 		wh->dma_bounce_buffer = kmalloc(wh->dma_bounce_len,
 						GFP_KERNEL);
@@ -70,6 +92,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 		/* can't allocate memory; use PIO */
 		if (!wh->dma_bounce_buffer) {
 			wh->dma_bounce_len = 0;
+			scsi_pointer->dma_handle = (dma_addr_t) NULL;
 			return 1;
 		}
 
@@ -79,7 +102,15 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 			       scsi_pointer->this_residual);
 		}
 
-		addr = virt_to_bus(wh->dma_bounce_buffer);
+		addr = dma_map_single(hdata->dev, scsi_pointer->ptr,
+				      len, DMA_DIR(dir_in));
+		if (dma_mapping_error(hdata->dev, addr)) {
+			dev_warn(hdata->dev,
+				 "cannot map SCSI data block %p\n",
+				 scsi_pointer->ptr);
+			return 1;
+		}
+		scsi_pointer->dma_handle = addr;
 	}
 
 	/* setup dma direction */
@@ -94,13 +125,7 @@ static int dma_setup(struct scsi_cmnd *cmd, int dir_in)
 	/* setup DMA *physical* address */
 	regs->ACR = addr;
 
-	if (dir_in) {
-		/* invalidate any cache */
-		cache_clear(addr, scsi_pointer->this_residual);
-	} else {
-		/* push any dirty cache */
-		cache_push(addr, scsi_pointer->this_residual);
-	}
+	/* no more cache flush here - dma_map_single() takes care */
 
 	/* start DMA */
 	mb();			/* make sure setup is completed */
@@ -151,6 +176,10 @@ static void dma_stop(struct Scsi_Host *instance, struct scsi_cmnd *SCpnt,
 	regs->CNTR = CNTR_PDMD | CNTR_INTEN;
 	mb();			/* make sure CNTR is updated before next IO */
 
+	dma_unmap_single(hdata->dev, scsi_pointer->dma_handle,
+			 scsi_pointer->this_residual,
+			 DMA_DIR(wh->dma_dir));
+
 	/* copy from a bounce buffer, if necessary */
 	if (status && wh->dma_bounce_buffer) {
 		if (SCpnt) {
@@ -193,6 +222,11 @@ static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
 	wd33c93_regs wdregs;
 	struct a3000_hostdata *hdata;
 
+	if (dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32))) {
+		dev_warn(&pdev->dev, "cannot use 32 bit DMA\n");
+		return -ENODEV;
+	}
+
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	if (!res)
 		return -ENODEV;
@@ -216,6 +250,7 @@ static int __init amiga_a3000_scsi_probe(struct platform_device *pdev)
 	wdregs.SCMD = &regs->SCMD;
 
 	hdata = shost_priv(instance);
+	hdata->dev = &pdev->dev;
 	hdata->wh.no_sync = 0xff;
 	hdata->wh.fast = 0;
 	hdata->wh.dma_mode = CTRL_DMA;