diff options
author | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-24 15:13:30 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@linux-foundation.org> | 2022-05-24 15:13:30 -0700 |
commit | d8e0f976f104a0258c0426b3805b057411cd0bd2 (patch) | |
tree | b1bd0b4aa350042830efcb88c71cbcf3824d1444 /drivers/spi/spi.c | |
parent | 9b18d07ba3ae75fcb7a191fafe4e2954f07271be (diff) | |
parent | 9c63b846e6df43e5b3d31263f7db545f32deeda3 (diff) |
Merge tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This is quite a quiet release but some new drivers mean that the
diffstat is fairly large. The new drivers include the aspeed driver
which is migrated from MTD as part of the ongoing move of controllers
with specialised support for SPI flashes into the SPI subsystem.
- Support for devices which flip CPHA during recieve only transfers
(eg, if MOSI and MISO have inverted polarity).
- Overhaul of the i.MX driver, including the addition of PIO support
for better performance on small transfers.
- Migration of the Aspeed driver from MTD.
- Support for Aspeed AST2400, Ingenic JZ4775 and X1/2000 and MediaTek
IPM and SFI"
* tag 'spi-v5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (84 commits)
spi: spi-au1550: replace ternary operator with min()
mtd: spi-nor: aspeed: set the decoding size to at least 2MB for AST2600
spi: aspeed: Calibrate read timings
spi: aspeed: Add support for the AST2400 SPI controller
spi: aspeed: Workaround AST2500 limitations
spi: aspeed: Adjust direct mapping to device size
spi: aspeed: Add support for direct mapping
spi: spi-mem: Convert Aspeed SMC driver to spi-mem
spi: Convert the Aspeed SMC controllers device tree binding
spi: spi-cadence: Update ISR status variable type to irqreturn_t
spi: Doc fix - Describe add_lock and dma_map_dev in spi_controller
spi: cadence-quadspi: Handle spi_unregister_master() in remove()
spi: stm32-qspi: Remove SR_BUSY bit check before sending command
spi: stm32-qspi: Always check SR_TCF flags in stm32_qspi_wait_cmd()
spi: stm32-qspi: Fix wait_cmd timeout in APM mode
spi: cadence-quadspi: remove unnecessary (void *) casts
spi: cadence-quadspi: Add missing blank line in cqspi_request_mmap_dma()
spi: spi-imx: mx51_ecspi_prepare_message(): skip writing MX51_ECSPI_CONFIG register if unchanged
spi: spi-imx: add PIO polling support
spi: spi-imx: replace struct spi_imx_data::bitbang by pointer to struct spi_controller
...
Diffstat (limited to 'drivers/spi/spi.c')
-rw-r--r-- | drivers/spi/spi.c | 25 |
1 files changed, 14 insertions, 11 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e6d6bbeb784..fe252a8075a7 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1611,9 +1611,8 @@ static void __spi_pump_messages(struct spi_controller *ctlr, bool in_kthread) mutex_lock(&ctlr->io_mutex); if (!was_busy && ctlr->auto_runtime_pm) { - ret = pm_runtime_get_sync(ctlr->dev.parent); + ret = pm_runtime_resume_and_get(ctlr->dev.parent); if (ret < 0) { - pm_runtime_put_noidle(ctlr->dev.parent); dev_err(&ctlr->dev, "Failed to power device: %d\n", ret); mutex_unlock(&ctlr->io_mutex); @@ -3475,7 +3474,7 @@ static int __spi_validate_bits_per_word(struct spi_controller *ctlr, int spi_setup(struct spi_device *spi) { unsigned bad_bits, ugly_bits; - int status; + int status = 0; /* * Check mode to prevent that any two of DUAL, QUAD and NO_MOSI/MISO @@ -3518,13 +3517,18 @@ int spi_setup(struct spi_device *spi) return -EINVAL; } - if (!spi->bits_per_word) + if (!spi->bits_per_word) { spi->bits_per_word = 8; - - status = __spi_validate_bits_per_word(spi->controller, - spi->bits_per_word); - if (status) - return status; + } else { + /* + * Some controllers may not support the default 8 bits-per-word + * so only perform the check when this is explicitly provided. + */ + status = __spi_validate_bits_per_word(spi->controller, + spi->bits_per_word); + if (status) + return status; + } if (spi->controller->max_speed_hz && (!spi->max_speed_hz || @@ -3544,10 +3548,9 @@ int spi_setup(struct spi_device *spi) } if (spi->controller->auto_runtime_pm && spi->controller->set_cs) { - status = pm_runtime_get_sync(spi->controller->dev.parent); + status = pm_runtime_resume_and_get(spi->controller->dev.parent); if (status < 0) { mutex_unlock(&spi->controller->io_mutex); - pm_runtime_put_noidle(spi->controller->dev.parent); dev_err(&spi->controller->dev, "Failed to power device: %d\n", status); return status; |