Merge tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB/Thunderbolt updates from Greg KH:
 "Here is the "big" set of USB and Thunderbolt changes for 6.7-rc1.
  Nothing really major in here, just lots of constant development for
  new hardware. Included in here are:

   - Thunderbolt (i.e. USB4) fixes for reported issues and support for
     new hardware types and devices

   - USB typec additions of new drivers and cleanups for some existing
     ones

   - xhci cleanups and expanded tracing support and some platform
     specific updates

   - USB "La Jolla Cove Adapter (LJCA)" support added, and the gpio,
     spi, and i2c drivers for that type of device (all acked by the
     respective subsystem maintainers.)

   - lots of USB gadget driver updates and cleanups

   - new USB dwc3 platforms supported, as well as other dwc3 fixes and
     cleanups

   - USB chipidea driver updates

   - other smaller driver cleanups and additions, full details in the
     shortlog

  All of these have been in the linux-next tree for a while with no
  reported problems"

* tag 'usb-6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (167 commits)
  usb: gadget: uvc: Add missing initialization of ssp config descriptor
  usb: storage: set 1.50 as the lower bcdDevice for older "Super Top" compatibility
  usb: raw-gadget: report suspend, resume, reset, and disconnect events
  usb: raw-gadget: don't disable device if usb_ep_queue fails
  usb: raw-gadget: properly handle interrupted requests
  usb:cdnsp: remove TRB_FLUSH_ENDPOINT command
  usb: gadget: aspeed_udc: Convert to platform remove callback returning void
  dt-bindings: usb: fsa4480: Add compatible for OCP96011
  usb: typec: fsa4480: Add support to swap SBU orientation
  dt-bindings: usb: fsa4480: Add data-lanes property to endpoint
  usb: typec: tcpm: Fix NULL pointer dereference in tcpm_pd_svdm()
  Revert "dt-bindings: usb: Add bindings for multiport properties on DWC3 controller"
  Revert "dt-bindings: usb: qcom,dwc3: Add bindings for SC8280 Multiport"
  thunderbolt: Fix one kernel-doc comment
  usb: gadget: f_ncm: Always set current gadget in ncm_bind()
  usb: core: Remove duplicated check in usb_hub_create_port_device
  usb: typec: tcpm: Add additional checks for contaminant
  arm64: dts: rockchip: rk3588s: Add USB3 host controller
  usb: dwc3: add optional PHY interface clocks
  dt-bindings: usb: add rk3588 compatible to rockchip,dwc3
  ...

3 files changed, 309 insertions, 0 deletions

diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index d4ac184bce95..35dbfacecf1c 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -616,6 +616,17 @@ config SPI_FSL_ESPI
 	  From MPC8536, 85xx platform uses the controller, and all P10xx,
 	  P20xx, P30xx,P40xx, P50xx uses this controller.
 
+config SPI_LJCA
+	tristate "Intel La Jolla Cove Adapter SPI support"
+	depends on USB_LJCA
+	default USB_LJCA
+	help
+	  Select this option to enable SPI driver for the Intel
+	  La Jolla Cove Adapter (LJCA) board.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called spi-ljca.
+
 config SPI_MESON_SPICC
 	tristate "Amlogic Meson SPICC controller"
 	depends on COMMON_CLK
diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile
index 6af54842b9fa..4ff8d725ba5e 100644
--- a/drivers/spi/Makefile
+++ b/drivers/spi/Makefile
@@ -71,6 +71,7 @@ obj-$(CONFIG_SPI_INTEL_PCI)		+= spi-intel-pci.o
 obj-$(CONFIG_SPI_INTEL_PLATFORM)	+= spi-intel-platform.o
 obj-$(CONFIG_SPI_LANTIQ_SSC)		+= spi-lantiq-ssc.o
 obj-$(CONFIG_SPI_JCORE)			+= spi-jcore.o
+obj-$(CONFIG_SPI_LJCA)			+= spi-ljca.o
 obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
 obj-$(CONFIG_SPI_LOONGSON_CORE)		+= spi-loongson-core.o
 obj-$(CONFIG_SPI_LOONGSON_PCI)		+= spi-loongson-pci.o
diff --git a/drivers/spi/spi-ljca.c b/drivers/spi/spi-ljca.c
new file mode 100644
index 000000000000..c5a066c73817
--- /dev/null
+++ b/drivers/spi/spi-ljca.c
@@ -0,0 +1,297 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Intel La Jolla Cove Adapter USB-SPI driver
+ *
+ * Copyright (c) 2023, Intel Corporation.
+ */
+
+#include <linux/auxiliary_bus.h>
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/dev_printk.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+#include <linux/usb/ljca.h>
+
+#define LJCA_SPI_BUS_MAX_HZ		48000000
+
+#define LJCA_SPI_BUF_SIZE		60u
+#define LJCA_SPI_MAX_XFER_SIZE		\
+	(LJCA_SPI_BUF_SIZE - sizeof(struct ljca_spi_xfer_packet))
+
+#define LJCA_SPI_CLK_MODE_POLARITY	BIT(0)
+#define LJCA_SPI_CLK_MODE_PHASE		BIT(1)
+
+#define LJCA_SPI_XFER_INDICATOR_ID	GENMASK(5, 0)
+#define LJCA_SPI_XFER_INDICATOR_CMPL	BIT(6)
+#define LJCA_SPI_XFER_INDICATOR_INDEX	BIT(7)
+
+/* SPI commands */
+enum ljca_spi_cmd {
+	LJCA_SPI_INIT = 1,
+	LJCA_SPI_READ,
+	LJCA_SPI_WRITE,
+	LJCA_SPI_WRITEREAD,
+	LJCA_SPI_DEINIT,
+};
+
+enum {
+	LJCA_SPI_BUS_SPEED_24M,
+	LJCA_SPI_BUS_SPEED_12M,
+	LJCA_SPI_BUS_SPEED_8M,
+	LJCA_SPI_BUS_SPEED_6M,
+	LJCA_SPI_BUS_SPEED_4_8M, /*4.8MHz*/
+	LJCA_SPI_BUS_SPEED_MIN = LJCA_SPI_BUS_SPEED_4_8M,
+};
+
+enum {
+	LJCA_SPI_CLOCK_LOW_POLARITY,
+	LJCA_SPI_CLOCK_HIGH_POLARITY,
+};
+
+enum {
+	LJCA_SPI_CLOCK_FIRST_PHASE,
+	LJCA_SPI_CLOCK_SECOND_PHASE,
+};
+
+struct ljca_spi_init_packet {
+	u8 index;
+	u8 speed;
+	u8 mode;
+} __packed;
+
+struct ljca_spi_xfer_packet {
+	u8 indicator;
+	u8 len;
+	u8 data[] __counted_by(len);
+} __packed;
+
+struct ljca_spi_dev {
+	struct ljca_client *ljca;
+	struct spi_controller *controller;
+	struct ljca_spi_info *spi_info;
+	u8 speed;
+	u8 mode;
+
+	u8 obuf[LJCA_SPI_BUF_SIZE];
+	u8 ibuf[LJCA_SPI_BUF_SIZE];
+};
+
+static int ljca_spi_read_write(struct ljca_spi_dev *ljca_spi, const u8 *w_data,
+			       u8 *r_data, int len, int id, int complete,
+			       int cmd)
+{
+	struct ljca_spi_xfer_packet *w_packet =
+			(struct ljca_spi_xfer_packet *)ljca_spi->obuf;
+	struct ljca_spi_xfer_packet *r_packet =
+			(struct ljca_spi_xfer_packet *)ljca_spi->ibuf;
+	int ret;
+
+	w_packet->indicator = FIELD_PREP(LJCA_SPI_XFER_INDICATOR_ID, id) |
+			      FIELD_PREP(LJCA_SPI_XFER_INDICATOR_CMPL, complete) |
+			      FIELD_PREP(LJCA_SPI_XFER_INDICATOR_INDEX,
+					 ljca_spi->spi_info->id);
+
+	if (cmd == LJCA_SPI_READ) {
+		w_packet->len = sizeof(u16);
+		*(__le16 *)&w_packet->data[0] = cpu_to_le16(len);
+	} else {
+		w_packet->len = len;
+		memcpy(w_packet->data, w_data, len);
+	}
+
+	ret = ljca_transfer(ljca_spi->ljca, cmd, (u8 *)w_packet,
+			    struct_size(w_packet, data, w_packet->len),
+			    (u8 *)r_packet, LJCA_SPI_BUF_SIZE);
+	if (ret < 0)
+		return ret;
+	else if (ret < sizeof(*r_packet) || r_packet->len <= 0)
+		return -EIO;
+
+	if (r_data)
+		memcpy(r_data, r_packet->data, r_packet->len);
+
+	return 0;
+}
+
+static int ljca_spi_init(struct ljca_spi_dev *ljca_spi, u8 div, u8 mode)
+{
+	struct ljca_spi_init_packet w_packet = {};
+	int ret;
+
+	if (ljca_spi->mode == mode && ljca_spi->speed == div)
+		return 0;
+
+	w_packet.index = ljca_spi->spi_info->id;
+	w_packet.speed = div;
+	w_packet.mode = FIELD_PREP(LJCA_SPI_CLK_MODE_POLARITY,
+				   (mode & SPI_CPOL) ? LJCA_SPI_CLOCK_HIGH_POLARITY :
+						       LJCA_SPI_CLOCK_LOW_POLARITY) |
+			FIELD_PREP(LJCA_SPI_CLK_MODE_PHASE,
+				   (mode & SPI_CPHA) ? LJCA_SPI_CLOCK_SECOND_PHASE :
+						       LJCA_SPI_CLOCK_FIRST_PHASE);
+
+	ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_INIT, (u8 *)&w_packet,
+			    sizeof(w_packet), NULL, 0);
+	if (ret < 0)
+		return ret;
+
+	ljca_spi->mode = mode;
+	ljca_spi->speed = div;
+
+	return 0;
+}
+
+static int ljca_spi_deinit(struct ljca_spi_dev *ljca_spi)
+{
+	struct ljca_spi_init_packet w_packet = {};
+	int ret;
+
+	w_packet.index = ljca_spi->spi_info->id;
+
+	ret = ljca_transfer(ljca_spi->ljca, LJCA_SPI_DEINIT, (u8 *)&w_packet,
+			    sizeof(w_packet), NULL, 0);
+
+	return ret < 0 ? ret : 0;
+}
+
+static inline int ljca_spi_transfer(struct ljca_spi_dev *ljca_spi,
+				    const u8 *tx_data, u8 *rx_data, u16 len)
+{
+	int complete, cur_len;
+	int remaining = len;
+	int cmd, ret, i;
+	int offset = 0;
+
+	if (tx_data && rx_data)
+		cmd = LJCA_SPI_WRITEREAD;
+	else if (tx_data)
+		cmd = LJCA_SPI_WRITE;
+	else if (rx_data)
+		cmd = LJCA_SPI_READ;
+	else
+		return -EINVAL;
+
+	for (i = 0; remaining > 0; i++) {
+		cur_len = min_t(unsigned int, remaining, LJCA_SPI_MAX_XFER_SIZE);
+		complete = (cur_len == remaining);
+
+		ret = ljca_spi_read_write(ljca_spi,
+					  tx_data ? tx_data + offset : NULL,
+					  rx_data ? rx_data + offset : NULL,
+					  cur_len, i, complete, cmd);
+		if (ret)
+			return ret;
+
+		offset += cur_len;
+		remaining -= cur_len;
+	}
+
+	return 0;
+}
+
+static int ljca_spi_transfer_one(struct spi_controller *controller,
+				 struct spi_device *spi,
+				 struct spi_transfer *xfer)
+{
+	u8 div = DIV_ROUND_UP(controller->max_speed_hz, xfer->speed_hz) / 2 - 1;
+	struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller);
+	int ret;
+
+	div = min_t(u8, LJCA_SPI_BUS_SPEED_MIN, div);
+
+	ret = ljca_spi_init(ljca_spi, div, spi->mode);
+	if (ret) {
+		dev_err(&ljca_spi->ljca->auxdev.dev,
+			"cannot initialize transfer ret %d\n", ret);
+		return ret;
+	}
+
+	ret = ljca_spi_transfer(ljca_spi, xfer->tx_buf, xfer->rx_buf, xfer->len);
+	if (ret)
+		dev_err(&ljca_spi->ljca->auxdev.dev,
+			"transfer failed len: %d\n", xfer->len);
+
+	return ret;
+}
+
+static int ljca_spi_probe(struct auxiliary_device *auxdev,
+			  const struct auxiliary_device_id *aux_dev_id)
+{
+	struct ljca_client *ljca = auxiliary_dev_to_ljca_client(auxdev);
+	struct spi_controller *controller;
+	struct ljca_spi_dev *ljca_spi;
+	int ret;
+
+	controller = devm_spi_alloc_master(&auxdev->dev, sizeof(*ljca_spi));
+	if (!controller)
+		return -ENOMEM;
+
+	ljca_spi = spi_controller_get_devdata(controller);
+	ljca_spi->ljca = ljca;
+	ljca_spi->spi_info = dev_get_platdata(&auxdev->dev);
+	ljca_spi->controller = controller;
+
+	controller->bus_num = -1;
+	controller->mode_bits = SPI_CPHA | SPI_CPOL;
+	controller->transfer_one = ljca_spi_transfer_one;
+	controller->auto_runtime_pm = false;
+	controller->max_speed_hz = LJCA_SPI_BUS_MAX_HZ;
+
+	device_set_node(&ljca_spi->controller->dev, dev_fwnode(&auxdev->dev));
+	auxiliary_set_drvdata(auxdev, controller);
+
+	ret = spi_register_controller(controller);
+	if (ret)
+		dev_err(&auxdev->dev, "Failed to register controller\n");
+
+	return ret;
+}
+
+static void ljca_spi_dev_remove(struct auxiliary_device *auxdev)
+{
+	struct spi_controller *controller = auxiliary_get_drvdata(auxdev);
+	struct ljca_spi_dev *ljca_spi = spi_controller_get_devdata(controller);
+
+	spi_unregister_controller(controller);
+	ljca_spi_deinit(ljca_spi);
+}
+
+static int ljca_spi_dev_suspend(struct device *dev)
+{
+	struct spi_controller *controller = dev_get_drvdata(dev);
+
+	return spi_controller_suspend(controller);
+}
+
+static int ljca_spi_dev_resume(struct device *dev)
+{
+	struct spi_controller *controller = dev_get_drvdata(dev);
+
+	return spi_controller_resume(controller);
+}
+
+static const struct dev_pm_ops ljca_spi_pm = {
+	SYSTEM_SLEEP_PM_OPS(ljca_spi_dev_suspend, ljca_spi_dev_resume)
+};
+
+static const struct auxiliary_device_id ljca_spi_id_table[] = {
+	{ "usb_ljca.ljca-spi", 0 },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(auxiliary, ljca_spi_id_table);
+
+static struct auxiliary_driver ljca_spi_driver = {
+	.driver.pm	= &ljca_spi_pm,
+	.probe		= ljca_spi_probe,
+	.remove		= ljca_spi_dev_remove,
+	.id_table	= ljca_spi_id_table,
+};
+module_auxiliary_driver(ljca_spi_driver);
+
+MODULE_AUTHOR("Wentong Wu <wentong.wu@intel.com>");
+MODULE_AUTHOR("Zhifeng Wang <zhifeng.wang@intel.com>");
+MODULE_AUTHOR("Lixu Zhang <lixu.zhang@intel.com>");
+MODULE_DESCRIPTION("Intel La Jolla Cove Adapter USB-SPI driver");
+MODULE_LICENSE("GPL");
+MODULE_IMPORT_NS(LJCA);