Merge branch 'spi-5.15' into spi-5.16

6 files changed, 60 insertions, 58 deletions

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index 788dcdf25f00..f872cf196c2f 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -1301,7 +1301,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 	 * DMA map early, for performance (empties dcache ASAP) and
 	 * better fault reporting.
 	 */
-	if ((!master->cur_msg_mapped)
+	if ((!master->cur_msg->is_dma_mapped)
 		&& as->use_pdc) {
 		if (atmel_spi_dma_map_xfer(as, xfer) < 0)
 			return -ENOMEM;
@@ -1381,7 +1381,7 @@ static int atmel_spi_one_transfer(struct spi_master *master,
 		}
 	}
 
-	if (!master->cur_msg_mapped
+	if (!master->cur_msg->is_dma_mapped
 		&& as->use_pdc)
 		atmel_spi_dma_unmap_xfer(master, xfer);
 
diff --git a/drivers/spi/spi-mt65xx.c b/drivers/spi/spi-mt65xx.c
index 386e8c84be0a..a15de10ee286 100644
--- a/drivers/spi/spi-mt65xx.c
+++ b/drivers/spi/spi-mt65xx.c
@@ -233,36 +233,44 @@ static int mtk_spi_set_hw_cs_timing(struct spi_device *spi)
 		return delay;
 	inactive = (delay * DIV_ROUND_UP(mdata->spi_clk_hz, 1000000)) / 1000;
 
-	setup    = setup ? setup : 1;
-	hold     = hold ? hold : 1;
-	inactive = inactive ? inactive : 1;
-
-	reg_val = readl(mdata->base + SPI_CFG0_REG);
-	if (mdata->dev_comp->enhance_timing) {
-		hold = min_t(u32, hold, 0x10000);
-		setup = min_t(u32, setup, 0x10000);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xffff)
-			   << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
-	} else {
-		hold = min_t(u32, hold, 0x100);
-		setup = min_t(u32, setup, 0x100);
-		reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
-		reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
-		reg_val |= (((setup - 1) & 0xff)
-			    << SPI_CFG0_CS_SETUP_OFFSET);
+	if (hold || setup) {
+		reg_val = readl(mdata->base + SPI_CFG0_REG);
+		if (mdata->dev_comp->enhance_timing) {
+			if (hold) {
+				hold = min_t(u32, hold, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x10000);
+				reg_val &= ~(0xffff << SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xffff)
+					<< SPI_ADJUST_CFG0_CS_SETUP_OFFSET);
+			}
+		} else {
+			if (hold) {
+				hold = min_t(u32, hold, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_HOLD_OFFSET);
+				reg_val |= (((hold - 1) & 0xff) << SPI_CFG0_CS_HOLD_OFFSET);
+			}
+			if (setup) {
+				setup = min_t(u32, setup, 0x100);
+				reg_val &= ~(0xff << SPI_CFG0_CS_SETUP_OFFSET);
+				reg_val |= (((setup - 1) & 0xff)
+					<< SPI_CFG0_CS_SETUP_OFFSET);
+			}
+		}
+		writel(reg_val, mdata->base + SPI_CFG0_REG);
 	}
-	writel(reg_val, mdata->base + SPI_CFG0_REG);
 
-	inactive = min_t(u32, inactive, 0x100);
-	reg_val = readl(mdata->base + SPI_CFG1_REG);
-	reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
-	reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
-	writel(reg_val, mdata->base + SPI_CFG1_REG);
+	if (inactive) {
+		inactive = min_t(u32, inactive, 0x100);
+		reg_val = readl(mdata->base + SPI_CFG1_REG);
+		reg_val &= ~SPI_CFG1_CS_IDLE_MASK;
+		reg_val |= (((inactive - 1) & 0xff) << SPI_CFG1_CS_IDLE_OFFSET);
+		writel(reg_val, mdata->base + SPI_CFG1_REG);
+	}
 
 	return 0;
 }
diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index a66fa97046ee..2b0301fc971c 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -33,6 +33,7 @@
 
 #include <linux/acpi.h>
 #include <linux/bitops.h>
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/completion.h>
 #include <linux/delay.h>
@@ -315,6 +316,7 @@
 #define NXP_FSPI_MIN_IOMAP	SZ_4M
 
 #define DCFG_RCWSR1		0x100
+#define SYS_PLL_RAT		GENMASK(6, 2)
 
 /* Access flash memory using IP bus only */
 #define FSPI_QUIRK_USE_IP_ONLY	BIT(0)
@@ -926,9 +928,8 @@ static void erratum_err050568(struct nxp_fspi *f)
 		{ .family = "QorIQ LS1028A" },
 		{ /* sentinel */ }
 	};
-	struct device_node *np;
 	struct regmap *map;
-	u32 val = 0, sysclk = 0;
+	u32 val, sys_pll_ratio;
 	int ret;
 
 	/* Check for LS1028A family */
@@ -937,7 +938,6 @@ static void erratum_err050568(struct nxp_fspi *f)
 		return;
 	}
 
-	/* Compute system clock frequency multiplier ratio */
 	map = syscon_regmap_lookup_by_compatible("fsl,ls1028a-dcfg");
 	if (IS_ERR(map)) {
 		dev_err(f->dev, "No syscon regmap\n");
@@ -948,23 +948,11 @@ static void erratum_err050568(struct nxp_fspi *f)
 	if (ret < 0)
 		goto err;
 
-	/* Strap bits 6:2 define SYS_PLL_RAT i.e frequency multiplier ratio */
-	val = (val >> 2) & 0x1F;
-	WARN(val == 0, "Strapping is zero: Cannot determine ratio");
+	sys_pll_ratio = FIELD_GET(SYS_PLL_RAT, val);
+	dev_dbg(f->dev, "val: 0x%08x, sys_pll_ratio: %d\n", val, sys_pll_ratio);
 
-	/* Compute system clock frequency */
-	np = of_find_node_by_name(NULL, "clock-sysclk");
-	if (!np)
-		goto err;
-
-	if (of_property_read_u32(np, "clock-frequency", &sysclk))
-		goto err;
-
-	sysclk = (sysclk * val) / 1000000; /* Convert sysclk to Mhz */
-	dev_dbg(f->dev, "val: 0x%08x, sysclk: %dMhz\n", val, sysclk);
-
-	/* Use IP bus only if PLL is 300MHz */
-	if (sysclk == 300)
+	/* Use IP bus only if platform clock is 300MHz */
+	if (sys_pll_ratio == 3)
 		f->devtype_data->quirks |= FSPI_QUIRK_USE_IP_ONLY;
 
 	return;
diff --git a/drivers/spi/spi-tegra20-slink.c b/drivers/spi/spi-tegra20-slink.c
index 3226c4e1c7c0..713292b0c71e 100644
--- a/drivers/spi/spi-tegra20-slink.c
+++ b/drivers/spi/spi-tegra20-slink.c
@@ -1194,7 +1194,7 @@ static int __maybe_unused tegra_slink_runtime_suspend(struct device *dev)
 	return 0;
 }
 
-static int __maybe_unused tegra_slink_runtime_resume(struct device *dev)
+static int tegra_slink_runtime_resume(struct device *dev)
 {
 	struct spi_master *master = dev_get_drvdata(dev);
 	struct tegra_slink_data *tspi = spi_master_get_devdata(master);
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index 57e2499ec1ed..aea037c65985 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -58,10 +58,6 @@ modalias_show(struct device *dev, struct device_attribute *a, char *buf)
 	const struct spi_device	*spi = to_spi_device(dev);
 	int len;
 
-	len = of_device_modalias(dev, buf, PAGE_SIZE);
-	if (len != -ENODEV)
-		return len;
-
 	len = acpi_device_modalias(dev, buf, PAGE_SIZE - 1);
 	if (len != -ENODEV)
 		return len;
@@ -367,10 +363,6 @@ static int spi_uevent(struct device *dev, struct kobj_uevent_env *env)
 	const struct spi_device		*spi = to_spi_device(dev);
 	int rc;
 
-	rc = of_device_uevent_modalias(dev, env);
-	if (rc != -ENODEV)
-		return rc;
-
 	rc = acpi_device_uevent_modalias(dev, env);
 	if (rc != -ENODEV)
 		return rc;
diff --git a/drivers/spi/spidev.c b/drivers/spi/spidev.c
index 6dc29ce3b4bf..1bd73e322b7b 100644
--- a/drivers/spi/spidev.c
+++ b/drivers/spi/spidev.c
@@ -673,6 +673,19 @@ static const struct file_operations spidev_fops = {
 
 static struct class *spidev_class;
 
+static const struct spi_device_id spidev_spi_ids[] = {
+	{ .name = "dh2228fv" },
+	{ .name = "ltc2488" },
+	{ .name = "sx1301" },
+	{ .name = "bk4" },
+	{ .name = "dhcom-board" },
+	{ .name = "m53cpld" },
+	{ .name = "spi-petra" },
+	{ .name = "spi-authenta" },
+	{},
+};
+MODULE_DEVICE_TABLE(spi, spidev_spi_ids);
+
 #ifdef CONFIG_OF
 static const struct of_device_id spidev_dt_ids[] = {
 	{ .compatible = "rohm,dh2228fv" },
@@ -818,6 +831,7 @@ static struct spi_driver spidev_spi_driver = {
 	},
 	.probe =	spidev_probe,
 	.remove =	spidev_remove,
+	.id_table =	spidev_spi_ids,
 
 	/* NOTE:  suspend/resume methods are not necessary here.
 	 * We don't do anything except pass the requests to/from