Staging: rt28x0: fix comments in sta/*.c files

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 347 insertions, 347 deletions

diff --git a/drivers/staging/rt2860/sta/connect.c b/drivers/staging/rt2860/sta/connect.c
index dc8b2d54a9fe..29906be51e58 100644
--- a/drivers/staging/rt2860/sta/connect.c
+++ b/drivers/staging/rt2860/sta/connect.c
@@ -37,35 +37,35 @@
 #include "../rt_config.h"
 
 UCHAR CipherSuiteWpaNoneTkip[] = {
-	0x00, 0x50, 0xf2, 0x01,	// oui
-	0x01, 0x00,		// Version
-	0x00, 0x50, 0xf2, 0x02,	// Multicast
-	0x01, 0x00,		// Number of unicast
-	0x00, 0x50, 0xf2, 0x02,	// unicast
-	0x01, 0x00,		// number of authentication method
-	0x00, 0x50, 0xf2, 0x00	// authentication
+	0x00, 0x50, 0xf2, 0x01,	/* oui */
+	0x01, 0x00,		/* Version */
+	0x00, 0x50, 0xf2, 0x02,	/* Multicast */
+	0x01, 0x00,		/* Number of unicast */
+	0x00, 0x50, 0xf2, 0x02,	/* unicast */
+	0x01, 0x00,		/* number of authentication method */
+	0x00, 0x50, 0xf2, 0x00	/* authentication */
 };
 
 UCHAR CipherSuiteWpaNoneTkipLen =
     (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));
 
 UCHAR CipherSuiteWpaNoneAes[] = {
-	0x00, 0x50, 0xf2, 0x01,	// oui
-	0x01, 0x00,		// Version
-	0x00, 0x50, 0xf2, 0x04,	// Multicast
-	0x01, 0x00,		// Number of unicast
-	0x00, 0x50, 0xf2, 0x04,	// unicast
-	0x01, 0x00,		// number of authentication method
-	0x00, 0x50, 0xf2, 0x00	// authentication
+	0x00, 0x50, 0xf2, 0x01,	/* oui */
+	0x01, 0x00,		/* Version */
+	0x00, 0x50, 0xf2, 0x04,	/* Multicast */
+	0x01, 0x00,		/* Number of unicast */
+	0x00, 0x50, 0xf2, 0x04,	/* unicast */
+	0x01, 0x00,		/* number of authentication method */
+	0x00, 0x50, 0xf2, 0x00	/* authentication */
 };
 
 UCHAR CipherSuiteWpaNoneAesLen =
     (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));
 
-// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
-// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
-// All settings successfuly negotiated furing MLME state machines become final settings
-// and are copied to pAd->StaActive
+/* The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS, */
+/* or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS */
+/* All settings successfuly negotiated furing MLME state machines become final settings */
+/* and are copied to pAd->StaActive */
 #define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd)                                 \
 {                                                                                       \
 	NdisZeroMemory((_pAd)->CommonCfg.Ssid, MAX_LEN_OF_SSID);							\
@@ -105,8 +105,8 @@ UCHAR CipherSuiteWpaNoneAesLen =
 VOID MlmeCntlInit(IN PRTMP_ADAPTER pAd,
 		  IN STATE_MACHINE * S, OUT STATE_MACHINE_FUNC Trans[])
 {
-	// Control state machine differs from other state machines, the interface
-	// follows the standard interface
+	/* Control state machine differs from other state machines, the interface */
+	/* follows the standard interface */
 	pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
 }
 
@@ -133,12 +133,12 @@ VOID MlmeCntlMachinePerformAction(IN PRTMP_ADAPTER pAd,
 		CntlWaitJoinProc(pAd, Elem);
 		break;
 
-		// CNTL_WAIT_REASSOC is the only state in CNTL machine that does
-		// not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
-		// Therefore not protected by NDIS's "only one outstanding OID request"
-		// rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
-		// Current approach is to block new SET request at RTMPSetInformation()
-		// when CntlMachine.CurrState is not CNTL_IDLE
+		/* CNTL_WAIT_REASSOC is the only state in CNTL machine that does */
+		/* not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)". */
+		/* Therefore not protected by NDIS's "only one outstanding OID request" */
+		/* rule. Which means NDIS may SET OID in the middle of ROAMing attempts. */
+		/* Current approach is to block new SET request at RTMPSetInformation() */
+		/* when CntlMachine.CurrState is not CNTL_IDLE */
 	case CNTL_WAIT_REASSOC:
 		CntlWaitReassocProc(pAd, Elem);
 		break;
@@ -158,15 +158,15 @@ VOID MlmeCntlMachinePerformAction(IN PRTMP_ADAPTER pAd,
 
 	case CNTL_WAIT_OID_LIST_SCAN:
 		if (Elem->MsgType == MT2_SCAN_CONF) {
-			// Resume TxRing after SCANING complete. We hope the out-of-service time
-			// won't be too long to let upper layer time-out the waiting frames
+			/* Resume TxRing after SCANING complete. We hope the out-of-service time */
+			/* won't be too long to let upper layer time-out the waiting frames */
 			RTMPResumeMsduTransmission(pAd);
 
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
 
-			//
-			// Set LED status to previous status.
-			//
+			/* */
+			/* Set LED status to previous status. */
+			/* */
 			if (pAd->bLedOnScanning) {
 				pAd->bLedOnScanning = FALSE;
 				RTMPSetLED(pAd, pAd->LedStatus);
@@ -181,28 +181,28 @@ VOID MlmeCntlMachinePerformAction(IN PRTMP_ADAPTER pAd,
 		}
 		break;
 #ifdef RTMP_MAC_USB
-		//
-		// This state is for that we want to connect to an AP but
-		// it didn't find on BSS List table. So we need to scan the air first,
-		// after that we can try to connect to the desired AP if available.
-		//
+		/* */
+		/* This state is for that we want to connect to an AP but */
+		/* it didn't find on BSS List table. So we need to scan the air first, */
+		/* after that we can try to connect to the desired AP if available. */
+		/* */
 	case CNTL_WAIT_SCAN_FOR_CONNECT:
 		if (Elem->MsgType == MT2_SCAN_CONF) {
-			// Resume TxRing after SCANING complete. We hope the out-of-service time
-			// won't be too long to let upper layer time-out the waiting frames
+			/* Resume TxRing after SCANING complete. We hope the out-of-service time */
+			/* won't be too long to let upper layer time-out the waiting frames */
 			RTMPResumeMsduTransmission(pAd);
 #ifdef CCX_SUPPORT
 			if (pAd->StaCfg.CCXReqType != MSRN_TYPE_UNUSED) {
-				// Cisco scan request is finished, prepare beacon report
+				/* Cisco scan request is finished, prepare beacon report */
 				MlmeEnqueue(pAd, AIRONET_STATE_MACHINE,
 					    MT2_AIRONET_SCAN_DONE, 0, NULL);
 			}
-#endif // CCX_SUPPORT //
+#endif /* CCX_SUPPORT // */
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
 
-			//
-			// Check if we can connect to.
-			//
+			/* */
+			/* Check if we can connect to. */
+			/* */
 			BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab,
 					 (CHAR *) pAd->MlmeAux.
 					 AutoReconnectSsid,
@@ -212,7 +212,7 @@ VOID MlmeCntlMachinePerformAction(IN PRTMP_ADAPTER pAd,
 			}
 		}
 		break;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 	default:
 		DBGPRINT_ERR(("!ERROR! CNTL - Illegal message type(=%ld)",
 			      Elem->MsgType));
@@ -257,8 +257,8 @@ VOID CntlIdleProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 		if (pAd->StaCfg.WpaSupplicantUP !=
 		    WPA_SUPPLICANT_ENABLE_WITH_WEB_UI) {
-			// Set the AutoReconnectSsid to prevent it reconnect to old SSID
-			// Since calling this indicate user don't want to connect to that SSID anymore.
+			/* Set the AutoReconnectSsid to prevent it reconnect to old SSID */
+			/* Since calling this indicate user don't want to connect to that SSID anymore. */
 			pAd->MlmeAux.AutoReconnectSsidLen = 32;
 			NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid,
 				       pAd->MlmeAux.AutoReconnectSsidLen);
@@ -287,8 +287,8 @@ VOID CntlOidScanProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	ULONG BssIdx = BSS_NOT_FOUND;
 	BSS_ENTRY CurrBss;
 
-	// record current BSS if network is connected.
-	// 2003-2-13 do not include current IBSS if this is the only STA in this IBSS.
+	/* record current BSS if network is connected. */
+	/* 2003-2-13 do not include current IBSS if this is the only STA in this IBSS. */
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)) {
 		BssIdx =
 		    BssSsidTableSearch(&pAd->ScanTab, pAd->CommonCfg.Bssid,
@@ -300,14 +300,14 @@ VOID CntlOidScanProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				       sizeof(BSS_ENTRY));
 		}
 	}
-	// clean up previous SCAN result, add current BSS back to table if any
+	/* clean up previous SCAN result, add current BSS back to table if any */
 	BssTableInit(&pAd->ScanTab);
 	if (BssIdx != BSS_NOT_FOUND) {
-		// DDK Note: If the NIC is associated with a particular BSSID and SSID
-		//    that are not contained in the list of BSSIDs generated by this scan, the
-		//    BSSID description of the currently associated BSSID and SSID should be
-		//    appended to the list of BSSIDs in the NIC's database.
-		// To ensure this, we append this BSS as the first entry in SCAN result
+		/* DDK Note: If the NIC is associated with a particular BSSID and SSID */
+		/*    that are not contained in the list of BSSIDs generated by this scan, the */
+		/*    BSSID description of the currently associated BSSID and SSID should be */
+		/*    appended to the list of BSSIDs in the NIC's database. */
+		/* To ensure this, we append this BSS as the first entry in SCAN result */
 		NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss,
 			       sizeof(BSS_ENTRY));
 		pAd->ScanTab.BssNr = 1;
@@ -335,7 +335,7 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	MLME_DISASSOC_REQ_STRUCT DisassocReq;
 	ULONG Now;
 
-	// Step 1. record the desired user settings to MlmeAux
+	/* Step 1. record the desired user settings to MlmeAux */
 	NdisZeroMemory(pAd->MlmeAux.Ssid, MAX_LEN_OF_SSID);
 	NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
 	pAd->MlmeAux.SsidLen = (UCHAR) pOidSsid->SsidLength;
@@ -344,16 +344,16 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 	pAd->StaCfg.bAutoConnectByBssid = FALSE;
 
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
+	/* */
+	/* Update Reconnect Ssid, that user desired to connect. */
+	/* */
 	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
 	NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid,
 		       pAd->MlmeAux.SsidLen);
 	pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
 
-	// step 2. find all matching BSS in the lastest SCAN result (inBssTab)
-	//    & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
+	/* step 2. find all matching BSS in the lastest SCAN result (inBssTab) */
+	/*    & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order */
 	BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab,
 			 (PCHAR) pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
 
@@ -371,18 +371,18 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 			       pAd->CommonCfg.SsidLen)
 	    && MAC_ADDR_EQUAL(pAd->CommonCfg.Bssid,
 			      pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid)) {
-		// Case 1. already connected with an AP who has the desired SSID
-		//         with highest RSSI
+		/* Case 1. already connected with an AP who has the desired SSID */
+		/*         with highest RSSI */
 
-		// Add checking Mode "LEAP" for CCX 1.0
+		/* Add checking Mode "LEAP" for CCX 1.0 */
 		if (((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA) ||
 		     (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
 		     (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
 		     (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
 		    ) &&
 		    (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED)) {
-			// case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
-			//          connection process
+			/* case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo */
+			/*          connection process */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
 			DisassocParmFill(pAd, &DisassocReq,
@@ -394,7 +394,7 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
 		} else if (pAd->bConfigChanged == TRUE) {
-			// case 1.2 Important Config has changed, we have to reconnect to the same AP
+			/* case 1.2 Important Config has changed, we have to reconnect to the same AP */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CntlOidSsidProc():CNTL - disassociate with current AP Because config changed...\n"));
 			DisassocParmFill(pAd, &DisassocReq,
@@ -406,22 +406,22 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    &DisassocReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
 		} else {
-			// case 1.3. already connected to the SSID with highest RSSI.
+			/* case 1.3. already connected to the SSID with highest RSSI. */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CntlOidSsidProc():CNTL - already with this BSSID. ignore this SET_SSID request\n"));
-			//
-			// (HCT 12.1) 1c_wlan_mediaevents required
-			// media connect events are indicated when associating with the same AP
-			//
+			/* */
+			/* (HCT 12.1) 1c_wlan_mediaevents required */
+			/* media connect events are indicated when associating with the same AP */
+			/* */
 			if (INFRA_ON(pAd)) {
-				//
-				// Since MediaState already is NdisMediaStateConnected
-				// We just indicate the connect event again to meet the WHQL required.
-				//
+				/* */
+				/* Since MediaState already is NdisMediaStateConnected */
+				/* We just indicate the connect event again to meet the WHQL required. */
+				/* */
 				pAd->IndicateMediaState =
 				    NdisMediaStateConnected;
 				RTMP_IndicateMediaState(pAd);
-				pAd->ExtraInfo = GENERAL_LINK_UP;	// Update extra information to link is up
+				pAd->ExtraInfo = GENERAL_LINK_UP;	/* Update extra information to link is up */
 			}
 
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
@@ -430,26 +430,26 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 						0);
 		}
 	} else if (INFRA_ON(pAd)) {
-		//
-		// For RT61
-		// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-		// RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect
-		// But media status is connected, so the SSID not report correctly.
-		//
+		/* */
+		/* For RT61 */
+		/* [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) */
+		/* RT61 may lost SSID, and not connect to NDTEST_WEP_AP2 and will connect to NDTEST_WEP_AP2 by Autoreconnect */
+		/* But media status is connected, so the SSID not report correctly. */
+		/* */
 		if (!SSID_EQUAL
 		    (pAd->CommonCfg.Ssid, pAd->CommonCfg.SsidLen,
 		     pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen)) {
-			//
-			// Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event.
-			//
+			/* */
+			/* Different SSID means not Roaming case, so we let LinkDown() to Indicate a disconnect event. */
+			/* */
 			pAd->MlmeAux.CurrReqIsFromNdis = TRUE;
 		}
-		// case 2. active INFRA association existent
-		//    roaming is done within miniport driver, nothing to do with configuration
-		//    utility. so upon a new SET(OID_802_11_SSID) is received, we just
-		//    disassociate with the current associated AP,
-		//    then perform a new association with this new SSID, no matter the
-		//    new/old SSID are the same or not.
+		/* case 2. active INFRA association existent */
+		/*    roaming is done within miniport driver, nothing to do with configuration */
+		/*    utility. so upon a new SET(OID_802_11_SSID) is received, we just */
+		/*    disassociate with the current associated AP, */
+		/*    then perform a new association with this new SSID, no matter the */
+		/*    new/old SSID are the same or not. */
 		DBGPRINT(RT_DEBUG_TRACE,
 			 ("CntlOidSsidProc():CNTL - disassociate with current AP...\n"));
 		DisassocParmFill(pAd, &DisassocReq, pAd->CommonCfg.Bssid,
@@ -488,7 +488,7 @@ VOID CntlOidSsidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
 			pAd->Mlme.CntlMachine.CurrState =
 			    CNTL_WAIT_OID_LIST_SCAN;
-			// Reset Missed scan number
+			/* Reset Missed scan number */
 			pAd->StaCfg.LastScanTime = Now;
 		} else {
 			pAd->MlmeAux.BssIdx = 0;
@@ -512,18 +512,18 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	MLME_DISASSOC_REQ_STRUCT DisassocReq;
 	MLME_JOIN_REQ_STRUCT JoinReq;
 
-	// record user desired settings
+	/* record user desired settings */
 	COPY_MAC_ADDR(pAd->MlmeAux.Bssid, pOidBssid);
 	pAd->MlmeAux.BssType = pAd->StaCfg.BssType;
 
-	// find the desired BSS in the latest SCAN result table
+	/* find the desired BSS in the latest SCAN result table */
 	BssIdx = BssTableSearch(&pAd->ScanTab, pOidBssid, pAd->MlmeAux.Channel);
 	if (BssIdx == BSS_NOT_FOUND) {
 		MLME_SCAN_REQ_STRUCT ScanReq;
 
 		DBGPRINT(RT_DEBUG_TRACE,
 			 ("CNTL - BSSID not found. reply NDIS_STATUS_NOT_ACCEPTED\n"));
-		//pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
+		/*pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE; */
 
 		DBGPRINT(RT_DEBUG_TRACE,
 			 ("CNTL - BSSID not found. start a new scan\n"));
@@ -532,13 +532,13 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
 			    sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
 		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
-		// Reset Missed scan number
+		/* Reset Missed scan number */
 		NdisGetSystemUpTime(&pAd->StaCfg.LastScanTime);
 		return;
 	}
-	//
-	// Update Reconnect Ssid, that user desired to connect.
-	//
+	/* */
+	/* Update Reconnect Ssid, that user desired to connect. */
+	/* */
 	NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, MAX_LEN_OF_SSID);
 	pAd->MlmeAux.AutoReconnectSsidLen =
 	    pAd->ScanTab.BssEntry[BssIdx].SsidLen;
@@ -546,21 +546,21 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 		       pAd->ScanTab.BssEntry[BssIdx].Ssid,
 		       pAd->ScanTab.BssEntry[BssIdx].SsidLen);
 
-	// copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why?
-	// Because we need this entry to become the JOIN target in later on SYNC state machine
+	/* copy the matched BSS entry from ScanTab to MlmeAux.SsidBssTab. Why? */
+	/* Because we need this entry to become the JOIN target in later on SYNC state machine */
 	pAd->MlmeAux.BssIdx = 0;
 	pAd->MlmeAux.SsidBssTab.BssNr = 1;
 	NdisMoveMemory(&pAd->MlmeAux.SsidBssTab.BssEntry[0],
 		       &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
 
-	// Add SSID into MlmeAux for site surey joining hidden SSID
+	/* Add SSID into MlmeAux for site surey joining hidden SSID */
 	pAd->MlmeAux.SsidLen = pAd->ScanTab.BssEntry[BssIdx].SsidLen;
 	NdisMoveMemory(pAd->MlmeAux.Ssid, pAd->ScanTab.BssEntry[BssIdx].Ssid,
 		       pAd->MlmeAux.SsidLen);
 
 	{
 		if (INFRA_ON(pAd)) {
-			// disassoc from current AP first
+			/* disassoc from current AP first */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CNTL - disassociate with current AP ...\n"));
 			DisassocParmFill(pAd, &DisassocReq,
@@ -586,14 +586,14 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				DBGPRINT(RT_DEBUG_TRACE,
 					 ("NDIS_STATUS_MEDIA_DISCONNECT Event C!\n"));
 			}
-			// Change the wepstatus to original wepstatus
+			/* Change the wepstatus to original wepstatus */
 			pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus;
 			pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus;
 			pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
 
-			// Check cipher suite, AP must have more secured cipher than station setting
-			// Set the Pairwise and Group cipher to match the intended AP setting
-			// We can only connect to AP with less secured cipher setting
+			/* Check cipher suite, AP must have more secured cipher than station setting */
+			/* Set the Pairwise and Group cipher to match the intended AP setting */
+			/* We can only connect to AP with less secured cipher setting */
 			if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA)
 			    || (pAd->StaCfg.AuthMode ==
 				Ndis802_11AuthModeWPAPSK)) {
@@ -612,7 +612,7 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 					pAd->StaCfg.PairCipher =
 					    pAd->ScanTab.BssEntry[BssIdx].WPA.
 					    PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
+				else	/* There is no PairCipher Aux, downgrade our capability to TKIP */
 					pAd->StaCfg.PairCipher =
 					    Ndis802_11Encryption2Enabled;
 			} else
@@ -634,16 +634,16 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 					pAd->StaCfg.PairCipher =
 					    pAd->ScanTab.BssEntry[BssIdx].WPA2.
 					    PairCipherAux;
-				else	// There is no PairCipher Aux, downgrade our capability to TKIP
+				else	/* There is no PairCipher Aux, downgrade our capability to TKIP */
 					pAd->StaCfg.PairCipher =
 					    Ndis802_11Encryption2Enabled;
 
-				// RSN capability
+				/* RSN capability */
 				pAd->StaCfg.RsnCapability =
 				    pAd->ScanTab.BssEntry[BssIdx].WPA2.
 				    RsnCapability;
 			}
-			// Set Mix cipher flag
+			/* Set Mix cipher flag */
 			pAd->StaCfg.bMixCipher =
 			    (pAd->StaCfg.PairCipher ==
 			     pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
@@ -652,7 +652,7 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 			   // If mix cipher, re-build RSNIE
 			   RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus, 0);
 			   } */
-			// No active association, join the BSS immediately
+			/* No active association, join the BSS immediately */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CNTL - joining %02x:%02x:%02x:%02x:%02x:%02x ...\n",
 				  pOidBssid[0], pOidBssid[1], pOidBssid[2],
@@ -667,14 +667,14 @@ VOID CntlOidRTBssidProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	}
 }
 
-// Roaming is the only external request triggering CNTL state machine
-// despite of other "SET OID" operation. All "SET OID" related oerations
-// happen in sequence, because no other SET OID will be sent to this device
-// until the the previous SET operation is complete (successful o failed).
-// So, how do we quarantee this ROAMING request won't corrupt other "SET OID"?
-// or been corrupted by other "SET OID"?
-//
-// IRQL = DISPATCH_LEVEL
+/* Roaming is the only external request triggering CNTL state machine */
+/* despite of other "SET OID" operation. All "SET OID" related oerations */
+/* happen in sequence, because no other SET OID will be sent to this device */
+/* until the the previous SET operation is complete (successful o failed). */
+/* So, how do we quarantee this ROAMING request won't corrupt other "SET OID"? */
+/* or been corrupted by other "SET OID"? */
+/* */
+/* IRQL = DISPATCH_LEVEL */
 VOID CntlMlmeRoamingProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 {
 	UCHAR BBPValue = 0;
@@ -682,7 +682,7 @@ VOID CntlMlmeRoamingProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	DBGPRINT(RT_DEBUG_TRACE, ("CNTL - Roaming in MlmeAux.RoamTab...\n"));
 
 	{
-		//Let BBP register at 20MHz to do (fast) roaming.
+		/*Let BBP register at 20MHz to do (fast) roaming. */
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &BBPValue);
 		BBPValue &= (~0x18);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, BBPValue);
@@ -720,7 +720,7 @@ VOID CntlWaitDisassocProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 
 		LinkDown(pAd, FALSE);
 
-		// case 1. no matching BSS, and user wants ADHOC, so we just start a new one
+		/* case 1. no matching BSS, and user wants ADHOC, so we just start a new one */
 		if ((pAd->MlmeAux.SsidBssTab.BssNr == 0)
 		    && (pAd->StaCfg.BssType == BSS_ADHOC)) {
 			DBGPRINT(RT_DEBUG_TRACE,
@@ -732,7 +732,7 @@ VOID CntlWaitDisassocProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    sizeof(MLME_START_REQ_STRUCT), &StartReq);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
 		}
-		// case 2. try each matched BSS
+		/* case 2. try each matched BSS */
 		else {
 			pAd->MlmeAux.BssIdx = 0;
 
@@ -757,12 +757,12 @@ VOID CntlWaitJoinProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	if (Elem->MsgType == MT2_JOIN_CONF) {
 		NdisMoveMemory(&Reason, Elem->Msg, sizeof(USHORT));
 		if (Reason == MLME_SUCCESS) {
-			// 1. joined an IBSS, we are pretty much done here
+			/* 1. joined an IBSS, we are pretty much done here */
 			if (pAd->MlmeAux.BssType == BSS_ADHOC) {
-				//
-				// 5G bands rules of Japan:
-				// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-				//
+				/* */
+				/* 5G bands rules of Japan: */
+				/* Ad hoc must be disabled in W53(ch52,56,60,64) channels. */
+				/* */
 				if ((pAd->CommonCfg.bIEEE80211H == 1) &&
 				    RadarChannelCheck(pAd,
 						      pAd->CommonCfg.Channel)
@@ -790,10 +790,10 @@ VOID CntlWaitJoinProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    NdisMediaStateConnected;
 				pAd->ExtraInfo = GENERAL_LINK_UP;
 			}
-			// 2. joined a new INFRA network, start from authentication
+			/* 2. joined a new INFRA network, start from authentication */
 			else {
 				{
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
+					/* either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first */
 					if ((pAd->StaCfg.AuthMode ==
 					     Ndis802_11AuthModeShared)
 					    || (pAd->StaCfg.AuthMode ==
@@ -817,7 +817,7 @@ VOID CntlWaitJoinProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    CNTL_WAIT_AUTH;
 			}
 		} else {
-			// 3. failed, try next BSS
+			/* 3. failed, try next BSS */
 			pAd->MlmeAux.BssIdx++;
 			IterateOnBssTab(pAd);
 		}
@@ -839,10 +839,10 @@ VOID CntlWaitStartProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	if (Elem->MsgType == MT2_START_CONF) {
 		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
 		if (Result == MLME_SUCCESS) {
-			//
-			// 5G bands rules of Japan:
-			// Ad hoc must be disabled in W53(ch52,56,60,64) channels.
-			//
+			/* */
+			/* 5G bands rules of Japan: */
+			/* Ad hoc must be disabled in W53(ch52,56,60,64) channels. */
+			/* */
 			if ((pAd->CommonCfg.bIEEE80211H == 1) &&
 			    RadarChannelCheck(pAd, pAd->CommonCfg.Channel)
 			    ) {
@@ -892,7 +892,7 @@ VOID CntlWaitStartProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 			}
 			LinkUp(pAd, BSS_ADHOC);
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
-			// Before send beacon, driver need do radar detection
+			/* Before send beacon, driver need do radar detection */
 			if ((pAd->CommonCfg.Channel > 14)
 			    && (pAd->CommonCfg.bIEEE80211H == 1)
 			    && RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) {
@@ -950,9 +950,9 @@ VOID CntlWaitAuthProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				    CNTL_WAIT_ASSOC;
 			}
 		} else {
-			// This fail may because of the AP already keep us in its MAC table without
-			// ageing-out. The previous authentication attempt must have let it remove us.
-			// so try Authentication again may help. For D-Link DWL-900AP+ compatibility.
+			/* This fail may because of the AP already keep us in its MAC table without */
+			/* ageing-out. The previous authentication attempt must have let it remove us. */
+			/* so try Authentication again may help. For D-Link DWL-900AP+ compatibility. */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CNTL - AUTH FAIL, try again...\n"));
 
@@ -961,7 +961,7 @@ VOID CntlWaitAuthProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				     Ndis802_11AuthModeShared)
 				    || (pAd->StaCfg.AuthMode ==
 					Ndis802_11AuthModeAutoSwitch)) {
-					// either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first
+					/* either Ndis802_11AuthModeShared or Ndis802_11AuthModeAutoSwitch, try shared key first */
 					AuthParmFill(pAd, &AuthReq,
 						     pAd->MlmeAux.Bssid,
 						     AUTH_MODE_KEY);
@@ -1028,10 +1028,10 @@ VOID CntlWaitAuthProc2(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				pAd->Mlme.CntlMachine.CurrState =
 				    CNTL_WAIT_AUTH2;
 			} else {
-				// not success, try next BSS
+				/* not success, try next BSS */
 				DBGPRINT(RT_DEBUG_TRACE,
 					 ("CNTL - AUTH FAIL, give up; try next BSS\n"));
-				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;	//???????
+				pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;	/*??????? */
 				pAd->MlmeAux.BssIdx++;
 				IterateOnBssTab(pAd);
 			}
@@ -1067,7 +1067,7 @@ VOID CntlWaitAssocProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				 ("CNTL - Association successful on BSS #%ld\n",
 				  pAd->MlmeAux.BssIdx));
 		} else {
-			// not success, try next BSS
+			/* not success, try next BSS */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CNTL - Association fails on BSS #%ld\n",
 				  pAd->MlmeAux.BssIdx));
@@ -1092,16 +1092,16 @@ VOID CntlWaitReassocProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 	if (Elem->MsgType == MT2_REASSOC_CONF) {
 		NdisMoveMemory(&Result, Elem->Msg, sizeof(USHORT));
 		if (Result == MLME_SUCCESS) {
-			// send wireless event - for association
+			/* send wireless event - for association */
 			if (pAd->CommonCfg.bWirelessEvent)
 				RTMPSendWirelessEvent(pAd, IW_ASSOC_EVENT_FLAG,
 						      pAd->MacTab.
 						      Content[BSSID_WCID].Addr,
 						      BSS0, 0);
 
-			//
-			// NDIS requires a new Link UP indication but no Link Down for RE-ASSOC
-			//
+			/* */
+			/* NDIS requires a new Link UP indication but no Link Down for RE-ASSOC */
+			/* */
 			LinkUp(pAd, BSS_INFRA);
 
 			pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
@@ -1109,7 +1109,7 @@ VOID CntlWaitReassocProc(IN PRTMP_ADAPTER pAd, IN MLME_QUEUE_ELEM * Elem)
 				 ("CNTL - Re-assocition successful on BSS #%ld\n",
 				  pAd->MlmeAux.RoamIdx));
 		} else {
-			// reassoc failed, try to pick next BSS in the BSS Table
+			/* reassoc failed, try to pick next BSS in the BSS Table */
 			DBGPRINT(RT_DEBUG_TRACE,
 				 ("CNTL - Re-assocition fails on BSS #%ld\n",
 				  pAd->MlmeAux.RoamIdx));
@@ -1128,7 +1128,7 @@ VOID AdhocTurnOnQos(IN PRTMP_ADAPTER pAd)
 #define AC2_DEF_TXOP		94
 #define AC3_DEF_TXOP		47
 
-	// Turn on QOs if use HT rate.
+	/* Turn on QOs if use HT rate. */
 	if (pAd->CommonCfg.APEdcaParm.bValid == FALSE) {
 		pAd->CommonCfg.APEdcaParm.bValid = TRUE;
 		pAd->CommonCfg.APEdcaParm.Aifsn[0] = 3;
@@ -1170,7 +1170,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	UCHAR Value = 0, idx = 0, HashIdx = 0;
 	MAC_TABLE_ENTRY *pEntry = NULL, *pCurrEntry = NULL;
 
-	// Init ChannelQuality to prevent DEAD_CQI at initial LinkUp
+	/* Init ChannelQuality to prevent DEAD_CQI at initial LinkUp */
 	pAd->Mlme.ChannelQuality = 50;
 
 	pEntry = MacTableLookup(pAd, pAd->CommonCfg.Bssid);
@@ -1181,15 +1181,15 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 
 	pEntry = &pAd->MacTab.Content[BSSID_WCID];
 
-	//
-	// ASSOC - DisassocTimeoutAction
-	// CNTL - Dis-associate successful
-	// !!! LINK DOWN !!!
-	// [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: )
-	//
-	// To prevent DisassocTimeoutAction to call Link down after we link up,
-	// cancel the DisassocTimer no matter what it start or not.
-	//
+	/* */
+	/* ASSOC - DisassocTimeoutAction */
+	/* CNTL - Dis-associate successful */
+	/* !!! LINK DOWN !!! */
+	/* [88888] OID_802_11_SSID should have returned NDTEST_WEP_AP2(Returned: ) */
+	/* */
+	/* To prevent DisassocTimeoutAction to call Link down after we link up, */
+	/* cancel the DisassocTimer no matter what it start or not. */
+	/* */
 	RTMPCancelTimer(&pAd->MlmeAux.DisassocTimer, &Cancelled);
 
 	COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
@@ -1197,8 +1197,8 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	COPY_HTSETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(pAd);
 
 #ifdef RTMP_MAC_PCI
-	// Before power save before link up function, We will force use 1R.
-	// So after link up, check Rx antenna # again.
+	/* Before power save before link up function, We will force use 1R. */
+	/* So after link up, check Rx antenna # again. */
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 	if (pAd->Antenna.field.RxPath == 3) {
 		Value |= (0x10);
@@ -1209,7 +1209,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
 	pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 	if (BssType == BSS_ADHOC) {
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_ADHOC_ON);
@@ -1226,17 +1226,17 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		DBGPRINT(RT_DEBUG_TRACE, ("!!!Infra LINK UP !!! \n"));
 	}
 
-	// 3*3
-	// reset Tx beamforming bit
+	/* 3*3 */
+	/* reset Tx beamforming bit */
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &Value);
 	Value &= (~0x01);
 	Value |= pAd->CommonCfg.RegTransmitSetting.field.TxBF;
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
 
-	// Change to AP channel
+	/* Change to AP channel */
 	if ((pAd->CommonCfg.CentralChannel > pAd->CommonCfg.Channel)
 	    && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth == BW_40)) {
-		// Must using 40MHz.
+		/* Must using 40MHz. */
 		pAd->CommonCfg.BBPCurrentBW = BW_40;
 		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
 		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
@@ -1246,13 +1246,13 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		Value |= 0x10;
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, Value);
 
-		//  RX : control channel at lower
+		/*  RX : control channel at lower */
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &Value);
 		Value &= (~0x20);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
 #ifdef RTMP_MAC_PCI
 		pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 		RTMP_IO_READ32(pAd, TX_BAND_CFG, &Data);
 		Data &= 0xfffffffe;
@@ -1271,7 +1271,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	} else if ((pAd->CommonCfg.CentralChannel < pAd->CommonCfg.Channel)
 		   && (pAd->MlmeAux.HtCapability.HtCapInfo.ChannelWidth ==
 		       BW_40)) {
-		// Must using 40MHz.
+		/* Must using 40MHz. */
 		pAd->CommonCfg.BBPCurrentBW = BW_40;
 		AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
 		AsicLockChannel(pAd, pAd->CommonCfg.CentralChannel);
@@ -1290,7 +1290,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
 #ifdef RTMP_MAC_PCI
 		pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 		if (pAd->MACVersion == 0x28600100) {
 			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x1A);
@@ -1321,7 +1321,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, Value);
 #ifdef RTMP_MAC_PCI
 		pAd->StaCfg.BBPR3 = Value;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 		if (pAd->MACVersion == 0x28600100) {
 			RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R69, 0x16);
@@ -1335,9 +1335,9 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 
 	RTMPSetAGCInitValue(pAd, pAd->CommonCfg.BBPCurrentBW);
 
-	//
-	// Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission
-	//
+	/* */
+	/* Save BBP_R66 value, it will be used in RTUSBResumeMsduTransmission */
+	/* */
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R66,
 				    &pAd->BbpTuning.R66CurrentValue);
 
@@ -1355,12 +1355,12 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	AsicSetSlotTime(pAd, TRUE);
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 
-	// Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit
+	/* Call this for RTS protectionfor legacy rate, we will always enable RTS threshold, but normally it will not hit */
 	AsicUpdateProtect(pAd, 0, (OFDMSETPROTECT | CCKSETPROTECT), TRUE,
 			  FALSE);
 
 	if ((pAd->StaActive.SupportedPhyInfo.bHtEnable == TRUE)) {
-		// Update HT protectionfor based on AP's operating mode.
+		/* Update HT protectionfor based on AP's operating mode. */
 		if (pAd->MlmeAux.AddHtInfo.AddHtInfo2.NonGfPresent == 1) {
 			AsicUpdateProtect(pAd,
 					  pAd->MlmeAux.AddHtInfo.AddHtInfo2.
@@ -1376,7 +1376,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	NdisZeroMemory(&pAd->DrsCounters, sizeof(COUNTER_DRS));
 
 	NdisGetSystemUpTime(&Now);
-	pAd->StaCfg.LastBeaconRxTime = Now;	// last RX timestamp
+	pAd->StaCfg.LastBeaconRxTime = Now;	/* last RX timestamp */
 
 	if ((pAd->CommonCfg.TxPreamble != Rt802_11PreambleLong) &&
 	    CAP_IS_SHORT_PREAMBLE_ON(pAd->StaActive.CapabilityInfo)) {
@@ -1394,18 +1394,18 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		if ((pAd->CommonCfg.Channel > 14)
 		    && (pAd->CommonCfg.bIEEE80211H == 1)
 		    && RadarChannelCheck(pAd, pAd->CommonCfg.Channel)) {
-			;	//Do nothing
+			;	/*Do nothing */
 		} else {
 			AsicEnableIbssSync(pAd);
 		}
 
-		// In ad hoc mode, use MAC table from index 1.
-		// p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here.
+		/* In ad hoc mode, use MAC table from index 1. */
+		/* p.s ASIC use all 0xff as termination of WCID table search.To prevent it's 0xff-ff-ff-ff-ff-ff, Write 0 here. */
 		RTMP_IO_WRITE32(pAd, MAC_WCID_BASE, 0x00);
 		RTMP_IO_WRITE32(pAd, 0x1808, 0x00);
 
-		// If WEP is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
+		/* If WEP is enabled, add key material and cipherAlg into Asic */
+		/* Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) */
 
 		if (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) {
 			PUCHAR Key;
@@ -1416,13 +1416,13 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				Key = pAd->SharedKey[BSS0][idx].Key;
 
 				if (pAd->SharedKey[BSS0][idx].KeyLen > 0) {
-					// Set key material and cipherAlg to Asic
+					/* Set key material and cipherAlg to Asic */
 					AsicAddSharedKeyEntry(pAd, BSS0, idx,
 							      CipherAlg, Key,
 							      NULL, NULL);
 
 					if (idx == pAd->StaCfg.DefaultKeyId) {
-						// Update WCID attribute table and IVEIV table for this group key table
+						/* Update WCID attribute table and IVEIV table for this group key table */
 						RTMPAddWcidAttributeEntry(pAd,
 									  BSS0,
 									  idx,
@@ -1433,10 +1433,10 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 
 			}
 		}
-		// If WPANone is enabled, add key material and cipherAlg into Asic
-		// Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000)
+		/* If WPANone is enabled, add key material and cipherAlg into Asic */
+		/* Fill in Shared Key Table(offset: 0x6c00) and Shared Key Mode(offset: 0x7000) */
 		else if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) {
-			pAd->StaCfg.DefaultKeyId = 0;	// always be zero
+			pAd->StaCfg.DefaultKeyId = 0;	/* always be zero */
 
 			NdisZeroMemory(&pAd->SharedKey[BSS0][0],
 				       sizeof(CIPHER_KEY));
@@ -1453,7 +1453,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 					       &pAd->StaCfg.PMK[16],
 					       LEN_TKIP_TXMICK);
 			}
-			// Decide its ChiperAlg
+			/* Decide its ChiperAlg */
 			if (pAd->StaCfg.PairCipher ==
 			    Ndis802_11Encryption2Enabled)
 				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_TKIP;
@@ -1467,7 +1467,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				pAd->SharedKey[BSS0][0].CipherAlg = CIPHER_AES;
 			}
 
-			// Set key material and cipherAlg to Asic
+			/* Set key material and cipherAlg to Asic */
 			AsicAddSharedKeyEntry(pAd,
 					      BSS0,
 					      0,
@@ -1476,16 +1476,16 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 					      pAd->SharedKey[BSS0][0].TxMic,
 					      pAd->SharedKey[BSS0][0].RxMic);
 
-			// Update WCID attribute table and IVEIV table for this group key table
+			/* Update WCID attribute table and IVEIV table for this group key table */
 			RTMPAddWcidAttributeEntry(pAd, BSS0, 0,
 						  pAd->SharedKey[BSS0][0].
 						  CipherAlg, NULL);
 
 		}
 
-	} else			// BSS_INFRA
+	} else			/* BSS_INFRA */
 	{
-		// Check the new SSID with last SSID
+		/* Check the new SSID with last SSID */
 		while (Cancelled == TRUE) {
 			if (pAd->CommonCfg.LastSsidLen ==
 			    pAd->CommonCfg.SsidLen) {
@@ -1493,11 +1493,11 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				    (pAd->CommonCfg.LastSsid,
 				     pAd->CommonCfg.Ssid,
 				     pAd->CommonCfg.LastSsidLen) == 0) {
-					// Link to the old one no linkdown is required.
+					/* Link to the old one no linkdown is required. */
 					break;
 				}
 			}
-			// Send link down event before set to link up
+			/* Send link down event before set to link up */
 			pAd->IndicateMediaState = NdisMediaStateDisconnected;
 			RTMP_IndicateMediaState(pAd);
 			pAd->ExtraInfo = GENERAL_LINK_DOWN;
@@ -1506,43 +1506,43 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 			break;
 		}
 
-		//
-		// On WPA mode, Remove All Keys if not connect to the last BSSID
-		// Key will be set after 4-way handshake.
-		//
+		/* */
+		/* On WPA mode, Remove All Keys if not connect to the last BSSID */
+		/* Key will be set after 4-way handshake. */
+		/* */
 		if (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA) {
 			ULONG IV;
 
-			// Remove all WPA keys
+			/* Remove all WPA keys */
 			RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
 			RTMPWPARemoveAllKeys(pAd);
 			pAd->StaCfg.PortSecured = WPA_802_1X_PORT_NOT_SECURED;
 			pAd->StaCfg.PrivacyFilter =
 			    Ndis802_11PrivFilter8021xWEP;
 
-			// Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP
-			// If IV related values are too large in GroupMsg2, AP would ignore this message.
+			/* Fixed connection failed with Range Maximizer - 515 AP (Marvell Chip) when security is WPAPSK/TKIP */
+			/* If IV related values are too large in GroupMsg2, AP would ignore this message. */
 			IV = 1;
 			IV |= (pAd->StaCfg.DefaultKeyId << 30);
 			AsicUpdateWCIDIVEIV(pAd, BSSID_WCID, IV, 0);
 		}
-		// NOTE:
-		// the decision of using "short slot time" or not may change dynamically due to
-		// new STA association to the AP. so we have to decide that upon parsing BEACON, not here
+		/* NOTE: */
+		/* the decision of using "short slot time" or not may change dynamically due to */
+		/* new STA association to the AP. so we have to decide that upon parsing BEACON, not here */
 
-		// NOTE:
-		// the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically
-		// due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here
+		/* NOTE: */
+		/* the decision to use "RTC/CTS" or "CTS-to-self" protection or not may change dynamically */
+		/* due to new STA association to the AP. so we have to decide that upon parsing BEACON, not here */
 
 		ComposePsPoll(pAd);
 		ComposeNullFrame(pAd);
 
 		AsicEnableBssSync(pAd);
 
-		// Add BSSID to WCID search table
+		/* Add BSSID to WCID search table */
 		AsicUpdateRxWCIDTable(pAd, BSSID_WCID, pAd->CommonCfg.Bssid);
 
-		// If WEP is enabled, add paiewise and shared key
+		/* If WEP is enabled, add paiewise and shared key */
 		if (((pAd->StaCfg.WpaSupplicantUP) &&
 		     (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
 		     (pAd->StaCfg.PortSecured == WPA_802_1X_PORT_SECURED)) ||
@@ -1556,13 +1556,13 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				Key = pAd->SharedKey[BSS0][idx].Key;
 
 				if (pAd->SharedKey[BSS0][idx].KeyLen > 0) {
-					// Set key material and cipherAlg to Asic
+					/* Set key material and cipherAlg to Asic */
 					AsicAddSharedKeyEntry(pAd, BSS0, idx,
 							      CipherAlg, Key,
 							      NULL, NULL);
 
 					if (idx == pAd->StaCfg.DefaultKeyId) {
-						// Assign group key info
+						/* Assign group key info */
 						RTMPAddWcidAttributeEntry(pAd,
 									  BSS0,
 									  idx,
@@ -1570,7 +1570,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 									  NULL);
 
 						pEntry->Aid = BSSID_WCID;
-						// Assign pairwise key info
+						/* Assign pairwise key info */
 						RTMPAddWcidAttributeEntry(pAd,
 									  BSS0,
 									  idx,
@@ -1580,11 +1580,11 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				}
 			}
 		}
-		// only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode
-		// should wait until at least 2 active nodes in this BSSID.
+		/* only INFRASTRUCTURE mode need to indicate connectivity immediately; ADHOC mode */
+		/* should wait until at least 2 active nodes in this BSSID. */
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
 
-		// For GUI ++
+		/* For GUI ++ */
 		if (pAd->StaCfg.AuthMode < Ndis802_11AuthModeWPA) {
 			pAd->IndicateMediaState = NdisMediaStateConnected;
 			pAd->ExtraInfo = GENERAL_LINK_UP;
@@ -1597,11 +1597,11 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 				RTMPSetTimer(&pAd->Mlme.LinkDownTimer,
 					     LINK_DOWN_TIMEOUT);
 		}
-		// --
+		/* -- */
 
-		// Add BSSID in my MAC Table.
+		/* Add BSSID in my MAC Table. */
 		NdisAcquireSpinLock(&pAd->MacTabLock);
-		// add this MAC entry into HASH table
+		/* add this MAC entry into HASH table */
 		if (pEntry) {
 			HashIdx = MAC_ADDR_HASH_INDEX(pAd->CommonCfg.Bssid);
 			if (pAd->MacTab.Hash[HashIdx] == NULL) {
@@ -1618,8 +1618,8 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 			       MAC_ADDR_LEN);
 		pEntry->Aid = BSSID_WCID;
 		pEntry->pAd = pAd;
-		pEntry->ValidAsCLI = TRUE;	//Although this is bssid..still set ValidAsCl
-		pAd->MacTab.Size = 1;	// infra mode always set MACtab size =1.
+		pEntry->ValidAsCLI = TRUE;	/*Although this is bssid..still set ValidAsCl */
+		pAd->MacTab.Size = 1;	/* infra mode always set MACtab size =1. */
 		pEntry->Sst = SST_ASSOC;
 		pEntry->AuthState = SST_ASSOC;
 		pEntry->AuthMode = pAd->StaCfg.AuthMode;
@@ -1687,15 +1687,15 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		  pAd->CommonCfg.BACapability.word,
 		  pAd->MacTab.Content[BSSID_WCID].ClientStatusFlags));
 
-	// Set LED
+	/* Set LED */
 	RTMPSetLED(pAd, LED_LINK_UP);
 
 	pAd->Mlme.PeriodicRound = 0;
 	pAd->Mlme.OneSecPeriodicRound = 0;
-	pAd->bConfigChanged = FALSE;	// Reset config flag
-	pAd->ExtraInfo = GENERAL_LINK_UP;	// Update extra information to link is up
+	pAd->bConfigChanged = FALSE;	/* Reset config flag */
+	pAd->ExtraInfo = GENERAL_LINK_UP;	/* Update extra information to link is up */
 
-	// Set asic auto fall back
+	/* Set asic auto fall back */
 	{
 		PUCHAR pTable;
 		UCHAR TableSize = 0;
@@ -1719,7 +1719,7 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		    || (pEntry->HTPhyMode.field.MCS == 32))
 			pEntry->HTPhyMode.field.STBC = STBC_NONE;
 
-		// If the legacy mode is set, overwrite the transmit setting of this entry.
+		/* If the legacy mode is set, overwrite the transmit setting of this entry. */
 		if (pEntry->HTPhyMode.field.MODE <= MODE_OFDM)
 			RTMPUpdateLegacyTxSetting((UCHAR) pAd->StaCfg.
 						  DesiredTransmitSetting.field.
@@ -1728,9 +1728,9 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		pEntry->bAutoTxRateSwitch = TRUE;
 	NdisReleaseSpinLock(&pAd->MacTabLock);
 
-	//  Let Link Status Page display first initial rate.
+	/*  Let Link Status Page display first initial rate. */
 	pAd->LastTxRate = (USHORT) (pEntry->HTPhyMode.word);
-	// Select DAC according to HT or Legacy
+	/* Select DAC according to HT or Legacy */
 	if (pAd->StaActive.SupportedPhyInfo.MCSSet[0] != 0x00) {
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &Value);
 		Value &= (~0x18);
@@ -1746,20 +1746,20 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 
 	if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE) {
 	} else if (pEntry->MaxRAmpduFactor == 0) {
-		// If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0.
-		// Because our Init value is 1 at MACRegTable.
+		/* If HT AP doesn't support MaxRAmpduFactor = 1, we need to set max PSDU to 0. */
+		/* Because our Init value is 1 at MACRegTable. */
 		RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x0fff);
 	}
-	// Patch for Marvel AP to gain high throughput
-	// Need to set as following,
-	// 1. Set txop in register-EDCA_AC0_CFG as 0x60
-	// 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero
-	// 3. PBF_MAX_PCNT as 0x1F3FBF9F
-	// 4. kick per two packets when dequeue
-	//
-	// Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable
-	//
-	// if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is.
+	/* Patch for Marvel AP to gain high throughput */
+	/* Need to set as following, */
+	/* 1. Set txop in register-EDCA_AC0_CFG as 0x60 */
+	/* 2. Set EnTXWriteBackDDONE in register-WPDMA_GLO_CFG as zero */
+	/* 3. PBF_MAX_PCNT as 0x1F3FBF9F */
+	/* 4. kick per two packets when dequeue */
+	/* */
+	/* Txop can only be modified when RDG is off, WMM is disable and TxBurst is enable */
+	/* */
+	/* if 1. Legacy AP WMM on,  or 2. 11n AP, AMPDU disable.  Force turn off burst no matter what bEnableTxBurst is. */
 	if (!((pAd->CommonCfg.RxStream == 1) && (pAd->CommonCfg.TxStream == 1))
 	    && (pAd->StaCfg.bForceTxBurst == FALSE)
 	    &&
@@ -1791,14 +1791,14 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 		DBGPRINT(RT_DEBUG_TRACE, ("Txburst 3\n"));
 	}
 
-	// Re-check to turn on TX burst or not.
+	/* Re-check to turn on TX burst or not. */
 	if ((pAd->CommonCfg.IOTestParm.bLastAtheros == TRUE)
 	    && ((STA_WEP_ON(pAd)) || (STA_TKIP_ON(pAd)))) {
 		pAd->CommonCfg.IOTestParm.bNextDisableRxBA = TRUE;
 		if (pAd->CommonCfg.bEnableTxBurst) {
 			UINT32 MACValue = 0;
-			// Force disable  TXOP value in this case. The same action in MLMEUpdateProtect too.
-			// I didn't change PBF_MAX_PCNT setting.
+			/* Force disable  TXOP value in this case. The same action in MLMEUpdateProtect too. */
+			/* I didn't change PBF_MAX_PCNT setting. */
 			RTMP_IO_READ32(pAd, EDCA_AC0_CFG, &MACValue);
 			MACValue &= 0xFFFFFF00;
 			RTMP_IO_WRITE32(pAd, EDCA_AC0_CFG, MACValue);
@@ -1813,9 +1813,9 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	DBGPRINT(RT_DEBUG_TRACE,
 		 ("!!!pAd->bNextDisableRxBA= %d \n",
 		  pAd->CommonCfg.IOTestParm.bNextDisableRxBA));
-	// BSSID add in one MAC entry too.  Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap
-	// Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver.
-	// Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same.
+	/* BSSID add in one MAC entry too.  Because in Tx, ASIC need to check Cipher and IV/EIV, BAbitmap */
+	/* Pther information in MACTab.Content[BSSID_WCID] is not necessary for driver. */
+	/* Note: As STA, The MACTab.Content[BSSID_WCID]. PairwiseKey and Shared Key for BSS0 are the same. */
 
 	if (pAd->StaCfg.WepStatus <= Ndis802_11WEPDisabled) {
 		if (pAd->StaCfg.WpaSupplicantUP &&
@@ -1832,10 +1832,10 @@ VOID LinkUp(IN PRTMP_ADAPTER pAd, IN UCHAR BssType)
 	pEntry->PortSecured = pAd->StaCfg.PortSecured;
 	NdisReleaseSpinLock(&pAd->MacTabLock);
 
-	//
-	// Patch Atheros AP TX will breakdown issue.
-	// AP Model: DLink DWL-8200AP
-	//
+	/* */
+	/* Patch Atheros AP TX will breakdown issue. */
+	/* AP Model: DLink DWL-8200AP */
+	/* */
 	if (INFRA_ON(pAd) && OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_WMM_INUSED)
 	    && STA_TKIP_ON(pAd)) {
 		RTMP_IO_WRITE32(pAd, RX_PARSER_CFG, 0x01);
@@ -1877,14 +1877,14 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 {
 	UCHAR i, ByteValue = 0;
 
-	// Do nothing if monitor mode is on
+	/* Do nothing if monitor mode is on */
 	if (MONITOR_ON(pAd))
 		return;
 
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_GO_TO_SLEEP_NOW);
-	//Comment the codes, beasue the line 2291 call the same function.
-	//RTMPCancelTimer(&pAd->Mlme.PsPollTimer,               &Cancelled);
-	// Not allow go to sleep within linkdown function.
+	/*Comment the codes, beasue the line 2291 call the same function. */
+	/*RTMPCancelTimer(&pAd->Mlme.PsPollTimer,               &Cancelled); */
+	/* Not allow go to sleep within linkdown function. */
 	RTMP_CLEAR_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
 
 	if (pAd->CommonCfg.bWirelessEvent) {
@@ -1904,7 +1904,7 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	}
 
 	pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)
 	    || RTMP_TEST_PSFLAG(pAd, fRTMP_PS_SET_PCI_CLK_OFF_COMMAND)
@@ -1917,9 +1917,9 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	}
 #ifdef RTMP_MAC_PCI
 	pAd->bPCIclkOff = FALSE;
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 
-	if (ADHOC_ON(pAd))	// Adhoc mode link down
+	if (ADHOC_ON(pAd))	/* Adhoc mode link down */
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 1!!!\n"));
 
@@ -1932,14 +1932,14 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 				    pAd->CommonCfg.Channel);
 		DBGPRINT(RT_DEBUG_TRACE,
 			 ("!!! MacTab.Size=%d !!!\n", pAd->MacTab.Size));
-	} else			// Infra structure mode
+	} else			/* Infra structure mode */
 	{
 		DBGPRINT(RT_DEBUG_TRACE, ("!!! LINK DOWN 2!!!\n"));
 
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_INFRA_ON);
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
 
-		// Saved last SSID for linkup comparison
+		/* Saved last SSID for linkup comparison */
 		pAd->CommonCfg.LastSsidLen = pAd->CommonCfg.SsidLen;
 		NdisMoveMemory(pAd->CommonCfg.LastSsid, pAd->CommonCfg.Ssid,
 			       pAd->CommonCfg.LastSsidLen);
@@ -1952,20 +1952,20 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 				 ("NDIS_STATUS_MEDIA_DISCONNECT Event A!\n"));
 			pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
 		} else {
-			//
-			// If disassociation request is from NDIS, then we don't need to delete BSSID from entry.
-			// Otherwise lost beacon or receive De-Authentication from AP,
-			// then we should delete BSSID from BssTable.
-			// If we don't delete from entry, roaming will fail.
-			//
+			/* */
+			/* If disassociation request is from NDIS, then we don't need to delete BSSID from entry. */
+			/* Otherwise lost beacon or receive De-Authentication from AP, */
+			/* then we should delete BSSID from BssTable. */
+			/* If we don't delete from entry, roaming will fail. */
+			/* */
 			BssTableDeleteEntry(&pAd->ScanTab, pAd->CommonCfg.Bssid,
 					    pAd->CommonCfg.Channel);
 		}
 
-		// restore back to -
-		//      1. long slot (20 us) or short slot (9 us) time
-		//      2. turn on/off RTS/CTS and/or CTS-to-self protection
-		//      3. short preamble
+		/* restore back to - */
+		/*      1. long slot (20 us) or short slot (9 us) time */
+		/*      2. turn on/off RTS/CTS and/or CTS-to-self protection */
+		/*      3. short preamble */
 		OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_BG_PROTECTION_INUSED);
 
 	}
@@ -1976,13 +1976,13 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 					    pAd->MacTab.Content[i].Addr);
 	}
 
-	AsicSetSlotTime(pAd, TRUE);	//FALSE);
+	AsicSetSlotTime(pAd, TRUE);	/*FALSE); */
 	AsicSetEdcaParm(pAd, NULL);
 
-	// Set LED
+	/* Set LED */
 	RTMPSetLED(pAd, LED_LINK_DOWN);
 	pAd->LedIndicatorStrength = 0xF0;
-	RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, firmware is not done it.
+	RTMPSetSignalLED(pAd, -100);	/* Force signal strength Led to be turned off, firmware is not done it. */
 
 	AsicDisableSync(pAd);
 
@@ -1990,7 +1990,7 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	pAd->Mlme.OneSecPeriodicRound = 0;
 
 	if (pAd->StaCfg.BssType == BSS_INFRA) {
-		// Remove StaCfg Information after link down
+		/* Remove StaCfg Information after link down */
 		NdisZeroMemory(pAd->CommonCfg.Bssid, MAC_ADDR_LEN);
 		NdisZeroMemory(pAd->CommonCfg.Ssid, MAX_LEN_OF_SSID);
 		pAd->CommonCfg.SsidLen = 0;
@@ -2001,25 +2001,25 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	pAd->MlmeAux.HtCapabilityLen = 0;
 	pAd->MlmeAux.NewExtChannelOffset = 0xff;
 
-	// Reset WPA-PSK state. Only reset when supplicant enabled
+	/* Reset WPA-PSK state. Only reset when supplicant enabled */
 	if (pAd->StaCfg.WpaState != SS_NOTUSE) {
 		pAd->StaCfg.WpaState = SS_START;
-		// Clear Replay counter
+		/* Clear Replay counter */
 		NdisZeroMemory(pAd->StaCfg.ReplayCounter, 8);
 
 	}
-	//
-	// if link down come from AP, we need to remove all WPA keys on WPA mode.
-	// otherwise will cause 4-way handshaking failed, since the WPA key not empty.
-	//
+	/* */
+	/* if link down come from AP, we need to remove all WPA keys on WPA mode. */
+	/* otherwise will cause 4-way handshaking failed, since the WPA key not empty. */
+	/* */
 	if ((IsReqFromAP) && (pAd->StaCfg.AuthMode >= Ndis802_11AuthModeWPA)) {
-		// Remove all WPA keys
+		/* Remove all WPA keys */
 		RTMPWPARemoveAllKeys(pAd);
 	}
-	// 802.1x port control
+	/* 802.1x port control */
 
-	// Prevent clear PortSecured here with static WEP
-	// NetworkManger set security policy first then set SSID to connect AP.
+	/* Prevent clear PortSecured here with static WEP */
+	/* NetworkManger set security policy first then set SSID to connect AP. */
 	if (pAd->StaCfg.WpaSupplicantUP &&
 	    (pAd->StaCfg.WepStatus == Ndis802_11WEPEnabled) &&
 	    (pAd->StaCfg.IEEE8021X == FALSE)) {
@@ -2037,16 +2037,16 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	pAd->StaCfg.MicErrCnt = 0;
 
 	pAd->IndicateMediaState = NdisMediaStateDisconnected;
-	// Update extra information to link is up
+	/* Update extra information to link is up */
 	pAd->ExtraInfo = GENERAL_LINK_DOWN;
 
 	pAd->StaActive.SupportedPhyInfo.bHtEnable = FALSE;
 
 #ifdef RTMP_MAC_USB
 	pAd->bUsbTxBulkAggre = FALSE;
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
-	// Clean association information
+	/* Clean association information */
 	NdisZeroMemory(&pAd->StaCfg.AssocInfo,
 		       sizeof(NDIS_802_11_ASSOCIATION_INFORMATION));
 	pAd->StaCfg.AssocInfo.Length =
@@ -2054,9 +2054,9 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	pAd->StaCfg.ReqVarIELen = 0;
 	pAd->StaCfg.ResVarIELen = 0;
 
-	//
-	// Reset RSSI value after link down
-	//
+	/* */
+	/* Reset RSSI value after link down */
+	/* */
 	pAd->StaCfg.RssiSample.AvgRssi0 = 0;
 	pAd->StaCfg.RssiSample.AvgRssi0X8 = 0;
 	pAd->StaCfg.RssiSample.AvgRssi1 = 0;
@@ -2064,20 +2064,20 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	pAd->StaCfg.RssiSample.AvgRssi2 = 0;
 	pAd->StaCfg.RssiSample.AvgRssi2X8 = 0;
 
-	// Restore MlmeRate
+	/* Restore MlmeRate */
 	pAd->CommonCfg.MlmeRate = pAd->CommonCfg.BasicMlmeRate;
 	pAd->CommonCfg.RtsRate = pAd->CommonCfg.BasicMlmeRate;
 
-	//
-	// After Link down, reset piggy-back setting in ASIC. Disable RDG.
-	//
+	/* */
+	/* After Link down, reset piggy-back setting in ASIC. Disable RDG. */
+	/* */
 	if (pAd->CommonCfg.BBPCurrentBW == BW_40) {
 		pAd->CommonCfg.BBPCurrentBW = BW_20;
 		RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R4, &ByteValue);
 		ByteValue &= (~0x18);
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R4, ByteValue);
 	}
-	// Reset DAC
+	/* Reset DAC */
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R1, &ByteValue);
 	ByteValue &= (~0x18);
 	if (pAd->Antenna.field.TxPath == 2) {
@@ -2090,7 +2090,7 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 
 	pAd->CommonCfg.BACapability.word = pAd->CommonCfg.REGBACapability.word;
 
-	// Restore all settings in the following.
+	/* Restore all settings in the following. */
 	AsicUpdateProtect(pAd, 0,
 			  (ALLN_SETPROTECT | CCKSETPROTECT | OFDMSETPROTECT),
 			  TRUE, FALSE);
@@ -2101,7 +2101,7 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	RTMP_IO_WRITE32(pAd, MAX_LEN_CFG, 0x1fff);
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 
-// Allow go to sleep after linkdown steps.
+/* Allow go to sleep after linkdown steps. */
 	RTMP_SET_PSFLAG(pAd, fRTMP_PS_CAN_GO_SLEEP);
 
 	RtmpOSWrielessEventSend(pAd, SIOCGIWAP, -1, NULL, NULL, 0);
@@ -2111,7 +2111,7 @@ VOID LinkDown(IN PRTMP_ADAPTER pAd, IN BOOLEAN IsReqFromAP)
 	    && (pAd->Antenna.field.RxPath > 1 || pAd->Antenna.field.TxPath > 1)) {
 		RTMP_ASIC_MMPS_DISABLE(pAd);
 	}
-#endif // RT30xx //
+#endif /* RT30xx // */
 }
 
 /*
@@ -2128,16 +2128,16 @@ VOID IterateOnBssTab(IN PRTMP_ADAPTER pAd)
 	MLME_JOIN_REQ_STRUCT JoinReq;
 	ULONG BssIdx;
 
-	// Change the wepstatus to original wepstatus
+	/* Change the wepstatus to original wepstatus */
 	pAd->StaCfg.WepStatus = pAd->StaCfg.OrigWepStatus;
 	pAd->StaCfg.PairCipher = pAd->StaCfg.OrigWepStatus;
 	pAd->StaCfg.GroupCipher = pAd->StaCfg.OrigWepStatus;
 
 	BssIdx = pAd->MlmeAux.BssIdx;
 	if (BssIdx < pAd->MlmeAux.SsidBssTab.BssNr) {
-		// Check cipher suite, AP must have more secured cipher than station setting
-		// Set the Pairwise and Group cipher to match the intended AP setting
-		// We can only connect to AP with less secured cipher setting
+		/* Check cipher suite, AP must have more secured cipher than station setting */
+		/* Set the Pairwise and Group cipher to match the intended AP setting */
+		/* We can only connect to AP with less secured cipher setting */
 		if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA)
 		    || (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPAPSK)) {
 			pAd->StaCfg.GroupCipher =
@@ -2155,7 +2155,7 @@ VOID IterateOnBssTab(IN PRTMP_ADAPTER pAd)
 				pAd->StaCfg.PairCipher =
 				    pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].
 				    WPA.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
+			else	/* There is no PairCipher Aux, downgrade our capability to TKIP */
 				pAd->StaCfg.PairCipher =
 				    Ndis802_11Encryption2Enabled;
 		} else if ((pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPA2)
@@ -2176,16 +2176,16 @@ VOID IterateOnBssTab(IN PRTMP_ADAPTER pAd)
 				pAd->StaCfg.PairCipher =
 				    pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].
 				    WPA2.PairCipherAux;
-			else	// There is no PairCipher Aux, downgrade our capability to TKIP
+			else	/* There is no PairCipher Aux, downgrade our capability to TKIP */
 				pAd->StaCfg.PairCipher =
 				    Ndis802_11Encryption2Enabled;
 
-			// RSN capability
+			/* RSN capability */
 			pAd->StaCfg.RsnCapability =
 			    pAd->MlmeAux.SsidBssTab.BssEntry[BssIdx].WPA2.
 			    RsnCapability;
 		}
-		// Set Mix cipher flag
+		/* Set Mix cipher flag */
 		pAd->StaCfg.bMixCipher =
 		    (pAd->StaCfg.PairCipher ==
 		     pAd->StaCfg.GroupCipher) ? FALSE : TRUE;
@@ -2211,7 +2211,7 @@ VOID IterateOnBssTab(IN PRTMP_ADAPTER pAd)
 		MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_START_REQ,
 			    sizeof(MLME_START_REQ_STRUCT), &StartReq);
 		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_START;
-	} else			// no more BSS
+	} else			/* no more BSS */
 	{
 
 		{
@@ -2226,8 +2226,8 @@ VOID IterateOnBssTab(IN PRTMP_ADAPTER pAd)
 	}
 }
 
-// for re-association only
-// IRQL = DISPATCH_LEVEL
+/* for re-association only */
+/* IRQL = DISPATCH_LEVEL */
 VOID IterateOnBssTab2(IN PRTMP_ADAPTER pAd)
 {
 	MLME_REASSOC_REQ_STRUCT ReassocReq;
@@ -2245,7 +2245,7 @@ VOID IterateOnBssTab2(IN PRTMP_ADAPTER pAd)
 		AsicSwitchChannel(pAd, pBss->Channel, FALSE);
 		AsicLockChannel(pAd, pBss->Channel);
 
-		// reassociate message has the same structure as associate message
+		/* reassociate message has the same structure as associate message */
 		AssocParmFill(pAd, &ReassocReq, pBss->Bssid,
 			      pBss->CapabilityInfo, ASSOC_TIMEOUT,
 			      pAd->StaCfg.DefaultListenCount);
@@ -2253,7 +2253,7 @@ VOID IterateOnBssTab2(IN PRTMP_ADAPTER pAd)
 			    sizeof(MLME_REASSOC_REQ_STRUCT), &ReassocReq);
 
 		pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_REASSOC;
-	} else			// no more BSS
+	} else			/* no more BSS */
 	{
 
 		{
@@ -2355,7 +2355,7 @@ VOID ComposePsPoll(IN PRTMP_ADAPTER pAd)
 	COPY_MAC_ADDR(pAd->PsPollFrame.Ta, pAd->CurrentAddress);
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
 {
 	NdisZeroMemory(&pAd->NullFrame, sizeof(HEADER_802_11));
@@ -2366,7 +2366,7 @@ VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
 	COPY_MAC_ADDR(pAd->NullFrame.Addr2, pAd->CurrentAddress);
 	COPY_MAC_ADDR(pAd->NullFrame.Addr3, pAd->CommonCfg.Bssid);
 }
-#endif // RTMP_MAC_PCI //
+#endif /* RTMP_MAC_PCI // */
 #ifdef RTMP_MAC_USB
 VOID MlmeCntlConfirm(IN PRTMP_ADAPTER pAd, IN ULONG MsgType, IN USHORT Msg)
 {
@@ -2407,12 +2407,12 @@ VOID ComposePsPoll(IN PRTMP_ADAPTER pAd)
 	RTMPMoveMemory(&pAd->PsPollContext.TransferBuffer->field.
 		       WirelessPacket[TXWI_SIZE + TXINFO_SIZE],
 		       &pAd->PsPollFrame, sizeof(PSPOLL_FRAME));
-	// Append 4 extra zero bytes.
+	/* Append 4 extra zero bytes. */
 	pAd->PsPollContext.BulkOutSize =
 	    TXINFO_SIZE + TXWI_SIZE + sizeof(PSPOLL_FRAME) + 4;
 }
 
-// IRQL = DISPATCH_LEVEL
+/* IRQL = DISPATCH_LEVEL */
 VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
 {
 	PTXINFO_STRUC pTxInfo;
@@ -2446,7 +2446,7 @@ VOID ComposeNullFrame(IN PRTMP_ADAPTER pAd)
 	pAd->NullContext.BulkOutSize =
 	    TXINFO_SIZE + TXWI_SIZE + sizeof(pAd->NullFrame) + 4;
 }
-#endif // RTMP_MAC_USB //
+#endif /* RTMP_MAC_USB // */
 
 /*
 	==========================================================================
@@ -2477,27 +2477,27 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 
 	if ((pAd->CommonCfg.PhyMode == PHY_11B)
 	    && (pAd->CommonCfg.Channel <= 14)) {
-		SupRate[0] = 0x82;	// 1 mbps
-		SupRate[1] = 0x84;	// 2 mbps
-		SupRate[2] = 0x8b;	// 5.5 mbps
-		SupRate[3] = 0x96;	// 11 mbps
+		SupRate[0] = 0x82;	/* 1 mbps */
+		SupRate[1] = 0x84;	/* 2 mbps */
+		SupRate[2] = 0x8b;	/* 5.5 mbps */
+		SupRate[3] = 0x96;	/* 11 mbps */
 		SupRateLen = 4;
 		ExtRateLen = 0;
 	} else if (pAd->CommonCfg.Channel > 14) {
-		SupRate[0] = 0x8C;	// 6 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[1] = 0x12;	// 9 mbps, in units of 0.5 Mbps
-		SupRate[2] = 0x98;	// 12 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[3] = 0x24;	// 18 mbps, in units of 0.5 Mbps
-		SupRate[4] = 0xb0;	// 24 mbps, in units of 0.5 Mbps, basic rate
-		SupRate[5] = 0x48;	// 36 mbps, in units of 0.5 Mbps
-		SupRate[6] = 0x60;	// 48 mbps, in units of 0.5 Mbps
-		SupRate[7] = 0x6c;	// 54 mbps, in units of 0.5 Mbps
+		SupRate[0] = 0x8C;	/* 6 mbps, in units of 0.5 Mbps, basic rate */
+		SupRate[1] = 0x12;	/* 9 mbps, in units of 0.5 Mbps */
+		SupRate[2] = 0x98;	/* 12 mbps, in units of 0.5 Mbps, basic rate */
+		SupRate[3] = 0x24;	/* 18 mbps, in units of 0.5 Mbps */
+		SupRate[4] = 0xb0;	/* 24 mbps, in units of 0.5 Mbps, basic rate */
+		SupRate[5] = 0x48;	/* 36 mbps, in units of 0.5 Mbps */
+		SupRate[6] = 0x60;	/* 48 mbps, in units of 0.5 Mbps */
+		SupRate[7] = 0x6c;	/* 54 mbps, in units of 0.5 Mbps */
 		SupRateLen = 8;
 		ExtRateLen = 0;
 
-		//
-		// Also Update MlmeRate & RtsRate for G only & A only
-		//
+		/* */
+		/* Also Update MlmeRate & RtsRate for G only & A only */
+		/* */
 		pAd->CommonCfg.MlmeRate = RATE_6;
 		pAd->CommonCfg.RtsRate = RATE_6;
 		pAd->CommonCfg.MlmeTransmit.field.MODE = MODE_OFDM;
@@ -2508,20 +2508,20 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 		pAd->MacTab.Content[BSS0Mcast_WCID].HTPhyMode.field.MCS =
 		    OfdmRateToRxwiMCS[pAd->CommonCfg.MlmeRate];
 	} else {
-		SupRate[0] = 0x82;	// 1 mbps
-		SupRate[1] = 0x84;	// 2 mbps
-		SupRate[2] = 0x8b;	// 5.5 mbps
-		SupRate[3] = 0x96;	// 11 mbps
+		SupRate[0] = 0x82;	/* 1 mbps */
+		SupRate[1] = 0x84;	/* 2 mbps */
+		SupRate[2] = 0x8b;	/* 5.5 mbps */
+		SupRate[3] = 0x96;	/* 11 mbps */
 		SupRateLen = 4;
 
-		ExtRate[0] = 0x0C;	// 6 mbps, in units of 0.5 Mbps,
-		ExtRate[1] = 0x12;	// 9 mbps, in units of 0.5 Mbps
-		ExtRate[2] = 0x18;	// 12 mbps, in units of 0.5 Mbps,
-		ExtRate[3] = 0x24;	// 18 mbps, in units of 0.5 Mbps
-		ExtRate[4] = 0x30;	// 24 mbps, in units of 0.5 Mbps,
-		ExtRate[5] = 0x48;	// 36 mbps, in units of 0.5 Mbps
-		ExtRate[6] = 0x60;	// 48 mbps, in units of 0.5 Mbps
-		ExtRate[7] = 0x6c;	// 54 mbps, in units of 0.5 Mbps
+		ExtRate[0] = 0x0C;	/* 6 mbps, in units of 0.5 Mbps, */
+		ExtRate[1] = 0x12;	/* 9 mbps, in units of 0.5 Mbps */
+		ExtRate[2] = 0x18;	/* 12 mbps, in units of 0.5 Mbps, */
+		ExtRate[3] = 0x24;	/* 18 mbps, in units of 0.5 Mbps */
+		ExtRate[4] = 0x30;	/* 24 mbps, in units of 0.5 Mbps, */
+		ExtRate[5] = 0x48;	/* 36 mbps, in units of 0.5 Mbps */
+		ExtRate[6] = 0x60;	/* 48 mbps, in units of 0.5 Mbps */
+		ExtRate[7] = 0x6c;	/* 54 mbps, in units of 0.5 Mbps */
 		ExtRateLen = 8;
 	}
 
@@ -2530,7 +2530,7 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 	pAd->StaActive.ExtRateLen = ExtRateLen;
 	NdisMoveMemory(pAd->StaActive.ExtRate, ExtRate, ExtRateLen);
 
-	// compose IBSS beacon frame
+	/* compose IBSS beacon frame */
 	MgtMacHeaderInit(pAd, &BcnHdr, SUBTYPE_BEACON, 0, BROADCAST_ADDR,
 			 pAd->CommonCfg.Bssid);
 	Privacy = (pAd->StaCfg.WepStatus == Ndis802_11Encryption1Enabled)
@@ -2558,7 +2558,7 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 			  1, &IbssIe,
 			  1, &IbssLen, 2, &pAd->StaActive.AtimWin, END_OF_ARGS);
 
-	// add ERP_IE and EXT_RAE IE of in 802.11g
+	/* add ERP_IE and EXT_RAE IE of in 802.11g */
 	if (ExtRateLen) {
 		ULONG tmp;
 
@@ -2569,7 +2569,7 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 				  ExtRateLen, ExtRate, END_OF_ARGS);
 		FrameLen += tmp;
 	}
-	// If adhoc secruity is set for WPA-None, append the cipher suite IE
+	/* If adhoc secruity is set for WPA-None, append the cipher suite IE */
 	if (pAd->StaCfg.AuthMode == Ndis802_11AuthModeWPANone) {
 		ULONG tmp;
 		RTMPMakeRSNIE(pAd, pAd->StaCfg.AuthMode, pAd->StaCfg.WepStatus,
@@ -2587,7 +2587,7 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 		ULONG TmpLen;
 		UCHAR HtLen, HtLen1;
 
-		// add HT Capability IE
+		/* add HT Capability IE */
 		HtLen = sizeof(pAd->CommonCfg.HtCapability);
 		HtLen1 = sizeof(pAd->CommonCfg.AddHTInfo);
 
@@ -2602,14 +2602,14 @@ ULONG MakeIbssBeacon(IN PRTMP_ADAPTER pAd)
 
 		FrameLen += TmpLen;
 	}
-	//beacon use reserved WCID 0xff
+	/*beacon use reserved WCID 0xff */
 	if (pAd->CommonCfg.Channel > 14) {
 		RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE,
 			      TRUE, 0, 0xff, FrameLen, PID_MGMT, PID_BEACON,
 			      RATE_1, IFS_HTTXOP, FALSE,
 			      &pAd->CommonCfg.MlmeTransmit);
 	} else {
-		// Set to use 1Mbps for Adhoc beacon.
+		/* Set to use 1Mbps for Adhoc beacon. */
 		HTTRANSMIT_SETTING Transmit;
 		Transmit.word = 0;
 		RTMPWriteTxWI(pAd, pTxWI, FALSE, FALSE, TRUE, FALSE, FALSE,