Staging: rt2870: remove CONFIG_STA_SUPPORT ifdefs

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

16 files changed, 33 insertions, 382 deletions

diff --git a/drivers/staging/rt2870/common/2870_rtmp_init.c b/drivers/staging/rt2870/common/2870_rtmp_init.c
index e134e444a31d..70ad919f86e1 100644
--- a/drivers/staging/rt2870/common/2870_rtmp_init.c
+++ b/drivers/staging/rt2870/common/2870_rtmp_init.c
@@ -825,8 +825,6 @@ NDIS_STATUS	 CreateThreads(
 	return NDIS_STATUS_SUCCESS;
 }
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 ========================================================================
 Routine Description:
@@ -1007,7 +1005,6 @@ VOID	RTMPAddBSSIDCipher(
 		DBGPRINT_RAW(RT_DEBUG_TRACE,(" %x:", pKey->KeyMaterial[i]));
 	DBGPRINT(RT_DEBUG_TRACE,("	 \n"));
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 ========================================================================
diff --git a/drivers/staging/rt2870/common/action.c b/drivers/staging/rt2870/common/action.c
index 4b271a30797d..8fc4c830b77b 100644
--- a/drivers/staging/rt2870/common/action.c
+++ b/drivers/staging/rt2870/common/action.c
@@ -128,7 +128,6 @@ VOID MlmeADDBAAction(
 			pBAEntry =&pAd->BATable.BAOriEntry[Idx];
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -136,7 +135,6 @@ VOID MlmeADDBAAction(
 			else
 				ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pInfo->pAddr);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = ADDBA_REQ;
@@ -212,10 +210,8 @@ VOID MlmeDELBAAction(
 		// SEND BAR (Send BAR to refresh peer reordering buffer.)
 		Idx = pAd->MacTab.Content[pInfo->Wcid].BAOriWcidArray[pInfo->TID];
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pInfo->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL funciton.
 		FrameBar.StartingSeq.field.StartSeq = pAd->MacTab.Content[pInfo->Wcid].TxSeq[pInfo->TID]; // make sure sequence not clear in DEL funciton.
@@ -233,7 +229,7 @@ VOID MlmeDELBAAction(
 
 		// SEND DELBA FRAME
 		FrameLen = 0;
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (ADHOC_ON(pAd))
@@ -241,7 +237,7 @@ VOID MlmeDELBAAction(
 			else
 				ActHeaderInit(pAd, &Frame.Hdr,  pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[pInfo->Wcid].Addr);
 		}
-#endif // CONFIG_STA_SUPPORT //
+
 		Frame.Category = CATEGORY_BA;
 		Frame.Action = DELBA;
 		Frame.DelbaParm.Initiator = pInfo->Initiator;
@@ -368,7 +364,6 @@ static VOID respond_ht_information_exchange_action(
 
 	NdisZeroMemory(&HTINFOframe, sizeof(FRAME_HT_INFO));
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -376,7 +371,6 @@ static VOID respond_ht_information_exchange_action(
 		else
 			ActHeaderInit(pAd, &HTINFOframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	HTINFOframe.Category = CATEGORY_HT;
 	HTINFOframe.Action = HT_INFO_EXCHANGE;
@@ -405,7 +399,7 @@ VOID PeerHTAction(
 	{
 		case NOTIFY_BW_ACTION:
 			DBGPRINT(RT_DEBUG_TRACE,("ACTION - HT Notify Channel bandwidth action----> \n"));
-#ifdef CONFIG_STA_SUPPORT
+
 			if(pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
 			{
 				// Note, this is to patch DIR-1353 AP. When the AP set to Wep, it will use legacy mode. But AP still keeps
@@ -415,7 +409,6 @@ VOID PeerHTAction(
 								Elem->Msg[LENGTH_802_11+2] ));
 				break;
 			}
-#endif // CONFIG_STA_SUPPORT //
 
 			if (Elem->Msg[LENGTH_802_11+2] == 0)	// 7.4.8.2. if value is 1, keep the same as supported channel bandwidth.
 				pAd->MacTab.Content[Elem->Wcid].HTPhyMode.field.BW = 0;
@@ -544,11 +537,8 @@ VOID SendRefreshBAR(
 
 			Sequence = pEntry->TxSeq[TID];
 
-
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				BarHeaderInit(pAd, &FrameBar, pEntry->Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 			FrameBar.StartingSeq.field.FragNum = 0; // make sure sequence not clear in DEL function.
 			FrameBar.StartingSeq.field.StartSeq = Sequence; // make sure sequence not clear in DEL funciton.
diff --git a/drivers/staging/rt2870/common/ba_action.c b/drivers/staging/rt2870/common/ba_action.c
index 91d9e1e99916..bbd759faec11 100644
--- a/drivers/staging/rt2870/common/ba_action.c
+++ b/drivers/staging/rt2870/common/ba_action.c
@@ -133,10 +133,8 @@ void Announce_Reordering_Packet(IN PRTMP_ADAPTER			pAd,
 		// pass this 802.3 packet to upper layer or forward this packet to WM directly
 		//
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -606,11 +604,8 @@ VOID BAOriSessionAdd(
 			return;
 		}
 
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			BarHeaderInit(pAd, &FrameBar, pAd->MacTab.Content[pBAEntry->Wcid].Addr, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
 
 		FrameBar.StartingSeq.field.FragNum = 0;	// make sure sequence not clear in DEL function.
 		FrameBar.StartingSeq.field.StartSeq = pBAEntry->Sequence; // make sure sequence not clear in DEL funciton.
@@ -1079,14 +1074,12 @@ VOID BAOriSessionSetupTimeout(
 
 	pAd = pBAEntry->pAdapter;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pEntry = &pAd->MacTab.Content[pBAEntry->Wcid];
 
@@ -1219,8 +1212,8 @@ VOID PeerAddBAReqAction(
 	}
 
 	NdisZeroMemory(&ADDframe, sizeof(FRAME_ADDBA_RSP));
+
 	// 2-1. Prepare ADDBA Response frame.
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (ADHOC_ON(pAd))
@@ -1228,7 +1221,7 @@ VOID PeerAddBAReqAction(
 		else
 			ActHeaderInit(pAd, &ADDframe.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAddr);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	ADDframe.Category = CATEGORY_BA;
 	ADDframe.Action = ADDBA_RESP;
 	ADDframe.Token = pAddreqFrame->Token;
@@ -1295,9 +1288,7 @@ VOID PeerAddBARspAction(
 		}
 		// Rcv Decline StatusCode
 		if ((pFrame->StatusCode == 37)
-#ifdef CONFIG_STA_SUPPORT
             || ((pAd->OpMode == OPMODE_STA) && STA_TGN_WIFI_ON(pAd) && (pFrame->StatusCode != 0))
-#endif // CONFIG_STA_SUPPORT //
             )
 		{
 			pAd->MacTab.Content[Elem->Wcid].BADeclineBitmap |= 1<<pFrame->BaParm.TID;
@@ -1418,10 +1409,9 @@ VOID SendPSMPAction(
 		DBGPRINT(RT_DEBUG_ERROR,("BA - MlmeADDBAAction() allocate memory failed \n"));
 		return;
 	}
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ActHeaderInit(pAd, &Frame.Hdr, pAd->CommonCfg.Bssid, pAd->CurrentAddress, pAd->MacTab.Content[Wcid].Addr);
-#endif // CONFIG_STA_SUPPORT //
 
 	Frame.Category = CATEGORY_HT;
 	Frame.Action = SMPS_ACTION;
@@ -1486,10 +1476,8 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	ASSERT(pRxBlk->pRxPacket);
 	pRxPkt = RTPKT_TO_OSPKT(pRxBlk->pRxPacket);
@@ -1504,15 +1492,12 @@ void convert_reordering_packet_to_preAMSDU_or_802_3_packet(
 	//
 	if (!RX_BLK_TEST_FLAG(pRxBlk, fRX_AMSDU))
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef LINUX
 			NdisMoveMemory(skb_push(pRxPkt, LENGTH_802_3), Header802_3, LENGTH_802_3);
 #endif
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
diff --git a/drivers/staging/rt2870/common/cmm_data.c b/drivers/staging/rt2870/common/cmm_data.c
index 161e8a6b53d7..3b1e10e420ae 100644
--- a/drivers/staging/rt2870/common/cmm_data.c
+++ b/drivers/staging/rt2870/common/cmm_data.c
@@ -248,14 +248,12 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		return NDIS_STATUS_FAILURE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// outgoing frame always wakeup PHY to prevent frame lost
 		if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE))
 			AsicForceWakeup(pAd, TRUE);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pFirstTxWI = (PTXWI_STRUC)(pSrcBufVA +  TXINFO_SIZE);
 	pHeader_802_11 = (PHEADER_802_11) (pSrcBufVA + TXINFO_SIZE + TXWI_SIZE); //TXWI_SIZE);
@@ -279,7 +277,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		pMacEntry = MacTableLookup(pAd, pHeader_802_11->Addr1);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Fixed W52 with Activity scan issue in ABG_MIXED and ABGN_MIXED mode.
@@ -295,7 +292,6 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 				pAd->CommonCfg.MlmeTransmit.field.MODE = 0;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// Should not be hard code to set PwrMgmt to 0 (PWR_ACTIVE)
@@ -305,7 +301,7 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 	// pHeader_802_11->FC.PwrMgmt = 0; // (pAd->StaCfg.Psm == PWR_SAVE);
 	//
 	// In WMM-UAPSD, mlme frame should be set psm as power saving but probe request frame
-#ifdef CONFIG_STA_SUPPORT
+
     // Data-Null packets alse pass through MMRequest in RT2860, however, we hope control the psm bit to pass APSD
 	if ((pHeader_802_11->FC.Type != BTYPE_DATA) && (pHeader_802_11->FC.Type != BTYPE_CNTL))
 	{
@@ -315,18 +311,15 @@ NDIS_STATUS MlmeHardTransmitMgmtRing(
 		else
 			pHeader_802_11->FC.PwrMgmt = PWR_ACTIVE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	bInsertTimestamp = FALSE;
 	if (pHeader_802_11->FC.Type == BTYPE_CNTL) // must be PS-POLL
 	{
-#ifdef CONFIG_STA_SUPPORT
 		//Set PM bit in ps-poll, to fix WLK 1.2  PowerSaveMode_ext failure issue.
 		if ((pAd->OpMode == OPMODE_STA) && (pHeader_802_11->FC.SubType == SUBTYPE_PS_POLL))
 		{
 			pHeader_802_11->FC.PwrMgmt = PWR_SAVE;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		bAckRequired = FALSE;
 	}
 	else // BTYPE_MGMT or BTYPE_DATA(must be NULL frame)
@@ -640,8 +633,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 			TX_BLK_SET_FLAG(pTxBlk, fTX_bAckRequired);
 
 		{
-
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			{
 
@@ -650,7 +641,6 @@ BOOLEAN RTMP_FillTxBlkInfo(
 					CLIENT_STATUS_TEST_FLAG(pMacEntry, fCLIENT_STATUS_WMM_CAPABLE))
 					TX_BLK_SET_FLAG(pTxBlk, fTX_bWMM);
 			}
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 		if (pTxBlk->TxFrameType == TX_LEGACY_FRAME)
@@ -730,13 +720,10 @@ BOOLEAN CanDoAggregateTransmit(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA)) // must be unicast to AP
 		return TRUE;
 	else
-#endif // CONFIG_STA_SUPPORT //
 		return FALSE;
-
 }
 
 
@@ -909,11 +896,8 @@ VOID RTMPDeQueuePacket(
 			Count += pTxBlk->TxPacketList.Number;
 
 				// Do HardTransmit now.
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				Status = STAHardTransmit(pAd, pTxBlk, QueIdx);
-#endif // CONFIG_STA_SUPPORT //
-
 
 #if 0	// We should not break if HardTransmit failed. Well, at least now we should not!
 			if (Status != NDIS_STATUS_SUCCESS)
@@ -1603,7 +1587,6 @@ UINT deaggregate_AMSDU_announce(
 		// convert to 802.3 header
         CONVERT_TO_802_3(Header802_3, pDA, pSA, pPayload, PayloadSize, pRemovedLLCSNAP);
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((Header802_3[12] == 0x88) && (Header802_3[13] == 0x8E) )
 		{
 		    // avoid local heap overflow, use dyanamic allocation
@@ -1613,9 +1596,7 @@ UINT deaggregate_AMSDU_announce(
 		   WpaEAPOLKeyAction(pAd, Elem);
 		   kfree(Elem);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 	        	if (pRemovedLLCSNAP)
@@ -1625,15 +1606,12 @@ UINT deaggregate_AMSDU_announce(
 	    			NdisMoveMemory(pPayload, &Header802_3[0], LENGTH_802_3);
 	        	}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		pClonePacket = ClonePacket(pAd, pPacket, pPayload, PayloadSize);
 		if (pClonePacket)
 		{
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pClonePacket, RTMP_GET_PACKET_IF(pPacket));
-#endif // CONFIG_STA_SUPPORT //
 		}
 
 
@@ -1729,11 +1707,11 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 		return NULL;
 
 	FirstWcid = 1;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
+
 	if (pAd->StaCfg.BssType == BSS_INFRA)
 		FirstWcid = 2;
-#endif // CONFIG_STA_SUPPORT //
 
 	// allocate one MAC entry
 	NdisAcquireSpinLock(&pAd->MacTabLock);
@@ -1756,8 +1734,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->PairwiseKey.CipherAlg = CIPHER_NONE;
 			}
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->ValidAsCLI = TRUE;
@@ -1766,7 +1742,6 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 					pEntry->ValidAsMesh = FALSE;
 					pEntry->ValidAsDls = FALSE;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->bIAmBadAtheros = FALSE;
@@ -1787,15 +1762,12 @@ MAC_TABLE_ENTRY *MacTableInsertEntry(
 				pEntry->apidx = apidx;
 
 			{
-
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pEntry->AuthMode = pAd->StaCfg.AuthMode;
 					pEntry->WepStatus = pAd->StaCfg.WepStatus;
 					pEntry->PrivacyFilter = Ndis802_11PrivFilterAcceptAll;
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 
 			pEntry->GTKState = REKEY_NEGOTIATING;
@@ -2280,10 +2252,8 @@ VOID Indicate_Legacy_Packet(
 	// 2. remove LLC
 	// 		a. pointer pRxBlk->pData to payload
 	//      b. modify pRxBlk->DataSize
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pRxBlk->DataSize > MAX_RX_PKT_LEN)
 	{
@@ -2347,11 +2317,8 @@ VOID Indicate_Legacy_Packet(
 	//
 	// pass this 802.3 packet to upper layer or forward this packet to WM directly
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -2414,11 +2381,8 @@ VOID CmmRxRalinkFrameIndicate(
 	}
 
 	// get 802.3 Header and  remove LLC
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTMP_802_11_REMOVE_LLC_AND_CONVERT_TO_802_3(pRxBlk, Header802_3);
-#endif // CONFIG_STA_SUPPORT //
-
 
 	ASSERT(pRxBlk->pRxPacket);
 
@@ -2428,10 +2392,9 @@ VOID CmmRxRalinkFrameIndicate(
 	Payload2Size = Msdu2Size - LENGTH_802_3;
 
 	pData2 = pRxBlk->pData + Payload1Size + LENGTH_802_3;
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pPacket2 = duplicate_pkt(pAd, (pData2-LENGTH_802_3), LENGTH_802_3, pData2, Payload2Size, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (!pPacket2)
 	{
@@ -2444,17 +2407,13 @@ VOID CmmRxRalinkFrameIndicate(
 	pRxBlk->DataSize = Payload1Size;
 	wlan_802_11_to_802_3_packet(pAd, pRxBlk, Header802_3, FromWhichBSSID);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pRxBlk->pRxPacket, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pPacket2)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			ANNOUNCE_OR_FORWARD_802_3_PACKET(pAd, pPacket2, FromWhichBSSID);
-#endif // CONFIG_STA_SUPPORT //
 	}
 }
 
@@ -2597,15 +2556,12 @@ VOID Indicate_EAPOL_Packet(
 {
 	MAC_TABLE_ENTRY *pEntry = NULL;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pEntry = &pAd->MacTab.Content[BSSID_WCID];
 		STARxEAPOLFrameIndicate(pAd, pEntry, pRxBlk, FromWhichBSSID);
 		return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pEntry == NULL)
 	{
diff --git a/drivers/staging/rt2870/common/cmm_data_2870.c b/drivers/staging/rt2870/common/cmm_data_2870.c
index ab710827fc54..0f646b94e794 100644
--- a/drivers/staging/rt2870/common/cmm_data_2870.c
+++ b/drivers/staging/rt2870/common/cmm_data_2870.c
@@ -692,7 +692,6 @@ VOID RtmpUSBNullFrameKickOut(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -838,7 +837,6 @@ VOID RT28xxUsbStaAsicSleepThenAutoWakeup(
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_DOZE);
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RT28xxUsbMlmeRadioOn(
 	IN PRTMP_ADAPTER pAd)
@@ -848,13 +846,12 @@ VOID RT28xxUsbMlmeRadioOn(
 	if (!RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
 		return;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
     	AsicSendCommandToMcu(pAd, 0x31, 0xff, 0x00, 0x00);
 		RTMPusecDelay(10000);
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	NICResetFromError(pAd);
 
 	// Enable Tx/Rx
@@ -863,10 +860,8 @@ VOID RT28xxUsbMlmeRadioOn(
 	// Clear Radio off flag
 	RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		RTUSBBulkReceive(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 	// Set LED
 	RTMPSetLED(pAd, LED_RADIO_ON);
@@ -888,7 +883,6 @@ VOID RT28xxUsbMlmeRadioOFF(
 	// Set Radio off flag
 	RTMP_SET_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Link down first if any association exists
@@ -900,8 +894,6 @@ VOID RT28xxUsbMlmeRadioOFF(
 		// Clean up old bss table
 		BssTableInit(&pAd->ScanTab);
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	// Disable MAC Tx/Rx
 	RTMP_IO_READ32(pAd, MAC_SYS_CTRL, &Value);
@@ -939,9 +931,7 @@ VOID RT28xxUsbMlmeRadioOFF(
 		RTMPusecDelay(1000);
 	}while (i++ < 100);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		AsicSendCommandToMcu(pAd, 0x30, 0xff, 0xff, 0x02);
-#endif // CONFIG_STA_SUPPORT //
 }
 
diff --git a/drivers/staging/rt2870/common/cmm_info.c b/drivers/staging/rt2870/common/cmm_info.c
index 33eca605ba74..99a5ca62f257 100644
--- a/drivers/staging/rt2870/common/cmm_info.c
+++ b/drivers/staging/rt2870/common/cmm_info.c
@@ -133,11 +133,9 @@ INT	Show_IEEE80211H_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf);
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -207,9 +205,7 @@ static struct {
 	{"WmmCapable",				Show_WmmCapable_Proc},
 #endif
 	{"IEEE80211H",				Show_IEEE80211H_Proc},
-#ifdef CONFIG_STA_SUPPORT
     {"NetworkType",				Show_NetworkType_Proc},
-#endif // CONFIG_STA_SUPPORT //
 	{"AuthMode",				Show_AuthMode_Proc},
 	{"EncrypType",				Show_EncrypType_Proc},
 	{"DefaultKeyID",			Show_DefaultKeyID_Proc},
@@ -233,11 +229,8 @@ INT Set_DriverVersion_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	IN	PUCHAR			arg)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		DBGPRINT(RT_DEBUG_TRACE, ("Driver version-%s\n", STA_DRIVER_VERSION));
-#endif // CONFIG_STA_SUPPORT //
 
     return TRUE;
 }
@@ -347,8 +340,6 @@ INT	Set_WirelessMode_Proc(
 
 	WirelessMode = simple_strtol(arg, 0, 10);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		INT MaxPhyMode = PHY_11G;
@@ -385,7 +376,6 @@ INT	Set_WirelessMode_Proc(
 			success = FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// it is needed to set SSID to take effect
 	if (success == TRUE)
@@ -423,7 +413,6 @@ INT	Set_Channel_Proc(
 	// check if this channel is valid
 	if (ChannelSanity(pAd, Channel) == TRUE)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.Channel = Channel;
@@ -450,16 +439,12 @@ INT	Set_Channel_Proc(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			success = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 
@@ -515,14 +500,11 @@ INT	Set_TxPower_Proc(
 	TxPower = (ULONG) simple_strtol(arg, 0, 10);
 	if (TxPower <= 100)
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pAd->CommonCfg.TxPowerDefault = TxPower;
 			pAd->CommonCfg.TxPowerPercentage = pAd->CommonCfg.TxPowerDefault;
 		}
-#endif // CONFIG_STA_SUPPORT //
 		success = TRUE;
 	}
 	else
@@ -587,22 +569,18 @@ INT	Set_TxPreamble_Proc(
 	{
 		case Rt802_11PreambleShort:
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
+
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				MlmeSetTxPreamble(pAd, Rt802_11PreambleShort);
-#endif // CONFIG_STA_SUPPORT //
 			break;
 		case Rt802_11PreambleLong:
-#ifdef CONFIG_STA_SUPPORT
 		case Rt802_11PreambleAuto:
 			// if user wants AUTO, initialize to LONG here, then change according to AP's
 			// capability upon association.
-#endif // CONFIG_STA_SUPPORT //
 			pAd->CommonCfg.TxPreamble = Preamble;
-#ifdef CONFIG_STA_SUPPORT
+
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				MlmeSetTxPreamble(pAd, Rt802_11PreambleLong);
-#endif // CONFIG_STA_SUPPORT //
 			break;
 		default: //Invalid argument
 			return FALSE;
@@ -631,10 +609,8 @@ INT	Set_RTSThreshold_Proc(
 
 	if((RtsThresh > 0) && (RtsThresh <= MAX_RTS_THRESHOLD))
 		pAd->CommonCfg.RtsThreshold  = (USHORT)RtsThresh;
-#ifdef CONFIG_STA_SUPPORT
 	else if (RtsThresh == 0)
 		pAd->CommonCfg.RtsThreshold = MAX_RTS_THRESHOLD;
-#endif // CONFIG_STA_SUPPORT //
 	else
 		return FALSE; //Invalid argument
 
@@ -675,7 +651,6 @@ INT	Set_FragThreshold_Proc(
 		pAd->CommonCfg.FragmentThreshold = (USHORT)FragThresh;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->CommonCfg.FragmentThreshold == MAX_FRAG_THRESHOLD)
@@ -683,7 +658,6 @@ INT	Set_FragThreshold_Proc(
 		else
 			pAd->CommonCfg.bUseZeroToDisableFragment = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FragThreshold_Proc::(FragThreshold=%d)\n", pAd->CommonCfg.FragmentThreshold));
 
@@ -1184,7 +1158,6 @@ BOOLEAN RTMPCheckStrPrintAble(
 
 	========================================================================
 */
-#ifdef CONFIG_STA_SUPPORT
 VOID    RTMPSetDesiredRates(
     IN  PRTMP_ADAPTER   pAdapter,
     IN  LONG            Rates)
@@ -1397,10 +1370,7 @@ NDIS_STATUS RTMPWPARemoveKeyProc(
 
 	return (Status);
 }
-#endif // CONFIG_STA_SUPPORT //
 
-
-#ifdef CONFIG_STA_SUPPORT
 /*
 	========================================================================
 
@@ -1450,7 +1420,6 @@ VOID	RTMPWPARemoveAllKeys(
 	}
 
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -1494,10 +1463,8 @@ VOID	RTMPSetPhyMode(
 
 	if (i == pAd->ChannelListNum)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			pAd->CommonCfg.Channel = FirstChannel(pAd);
-#endif // CONFIG_STA_SUPPORT //
 		DBGPRINT(RT_DEBUG_ERROR, ("RTMPSetPhyMode: channel is out of range, use first channel=%d \n", pAd->CommonCfg.Channel));
 	}
 
@@ -1816,14 +1783,10 @@ VOID	RTMPSetHT(
 	}
 	AsicSetEdcaParm(pAd, &pAd->CommonCfg.APEdcaParm);
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RTMPSetIndividualHT(pAd, 0);
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 /*
@@ -1848,8 +1811,6 @@ VOID	RTMPSetIndividualHT(
 
 	do
 	{
-
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			pDesired_ht_phy = &pAd->StaCfg.DesiredHtPhyInfo;
@@ -1857,7 +1818,6 @@ VOID	RTMPSetIndividualHT(
 			//pAd->StaCfg.bAutoTxRateSwitch = (DesiredMcs == MCS_AUTO) ? TRUE : FALSE;
 				break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while (FALSE);
 
 	if (pDesired_ht_phy == NULL)
@@ -2009,7 +1969,6 @@ VOID	RTMPAddWcidAttributeEntry(
 	USHORT		Wcid = 0;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (BssIdx > BSS0)
@@ -2030,13 +1989,11 @@ VOID	RTMPAddWcidAttributeEntry(
 			else
 				Wcid = MCAST_WCID;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Update WCID attribute table
 	offset = MAC_WCID_ATTRIBUTE_BASE + (Wcid * HW_WCID_ATTRI_SIZE);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pEntry && pEntry->ValidAsMesh)
@@ -2044,7 +2001,6 @@ VOID	RTMPAddWcidAttributeEntry(
 		else
 			WCIDAttri = (CipherAlg<<1) | SHAREDKEYTABLE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_IO_WRITE32(pAd, offset, WCIDAttri);
 
@@ -2178,11 +2134,10 @@ VOID RTMPIoctlGetSiteSurvey(
 
 
 	WaitCnt = 0;
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = TRUE;
+
 	while ((ScanRunning(pAdapter) == TRUE) && (WaitCnt++ < 200))
 		OS_WAIT(500);
-#endif // CONFIG_STA_SUPPORT //
 
 	for(i=0; i<pAdapter->ScanTab.BssNr ;i++)
 	{
@@ -2248,9 +2203,7 @@ VOID RTMPIoctlGetSiteSurvey(
         sprintf(msg+strlen(msg),"\n");
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	pAdapter->StaCfg.bScanReqIsFromWebUI = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 	wrq->u.data.length = strlen(msg);
 	Status = copy_to_user(wrq->u.data.pointer, msg, wrq->u.data.length);
 
@@ -2554,9 +2507,7 @@ INT	Set_HtMcs_Proc(
 	IN	PUCHAR			arg)
 {
 	ULONG HtMcs, Mcs_tmp;
-#ifdef CONFIG_STA_SUPPORT
     BOOLEAN bAutoRate = FALSE;
-#endif // CONFIG_STA_SUPPORT //
 
 	Mcs_tmp = simple_strtol(arg, 0, 10);
 
@@ -2565,7 +2516,6 @@ INT	Set_HtMcs_Proc(
 	else
 		HtMcs = MCS_AUTO;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = HtMcs;
@@ -2601,7 +2551,6 @@ INT	Set_HtMcs_Proc(
         if (ADHOC_ON(pAd))
             return TRUE;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	SetCommonHT(pAd);
 
@@ -3075,10 +3024,8 @@ INT	Set_FixedTxMode_Proc(
         fix_tx_mode = FIXED_TXMODE_CCK;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode = fix_tx_mode;
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("Set_FixedTxMode_Proc::(FixedTxMode=%d)\n", fix_tx_mode));
 
@@ -3165,11 +3112,8 @@ INT	Show_SSID_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%s", pAd->CommonCfg.Ssid);
-#endif // CONFIG_STA_SUPPORT //
 	return 0;
 }
 
@@ -3330,11 +3274,8 @@ INT	Show_HtMcs_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%u", pAd->StaCfg.DesiredTransmitSetting.field.MCS);
-#endif // CONFIG_STA_SUPPORT //
 	return 0;
 }
 
@@ -3476,11 +3417,8 @@ INT	Show_WmmCapable_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		sprintf(pBuf, "\t%s", pAd->CommonCfg.bWmmCapable ? "TRUE":"FALSE");
-#endif // CONFIG_STA_SUPPORT //
 
 	return 0;
 }
@@ -3494,7 +3432,6 @@ INT	Show_IEEE80211H_Proc(
 	return 0;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 INT	Show_NetworkType_Proc(
 	IN	PRTMP_ADAPTER	pAd,
 	OUT	PUCHAR			pBuf)
@@ -3519,7 +3456,6 @@ INT	Show_NetworkType_Proc(
 	}
 	return 0;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 INT	Show_AuthMode_Proc(
 	IN	PRTMP_ADAPTER	pAd,
@@ -3527,10 +3463,8 @@ INT	Show_AuthMode_Proc(
 {
 	NDIS_802_11_AUTHENTICATION_MODE	AuthMode = Ndis802_11AuthModeOpen;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		AuthMode = pAd->StaCfg.AuthMode;
-#endif // CONFIG_STA_SUPPORT //
 
 	if ((AuthMode >= Ndis802_11AuthModeOpen) &&
 		(AuthMode <= Ndis802_11AuthModeWPA1PSKWPA2PSK))
@@ -3547,10 +3481,8 @@ INT	Show_EncrypType_Proc(
 {
 	NDIS_802_11_WEP_STATUS	WepStatus = Ndis802_11WEPDisabled;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		WepStatus = pAd->StaCfg.WepStatus;
-#endif // CONFIG_STA_SUPPORT //
 
 	if ((WepStatus >= Ndis802_11WEPEnabled) &&
 		(WepStatus <= Ndis802_11Encryption4KeyAbsent))
@@ -3567,10 +3499,8 @@ INT	Show_DefaultKeyID_Proc(
 {
 	UCHAR DefaultKeyId = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		DefaultKeyId = pAd->StaCfg.DefaultKeyId;
-#endif // CONFIG_STA_SUPPORT //
 
 	sprintf(pBuf, "\t%d", DefaultKeyId);
 
@@ -3640,11 +3570,8 @@ INT	Show_WPAPSK_Proc(
 	INT 	idx;
 	UCHAR	PMK[32] = {0};
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		NdisMoveMemory(PMK, pAd->StaCfg.PMK, 32);
-#endif // CONFIG_STA_SUPPORT //
 
     sprintf(pBuf, "\tPMK = ");
     for (idx = 0; idx < 32; idx++)
diff --git a/drivers/staging/rt2870/common/cmm_sanity.c b/drivers/staging/rt2870/common/cmm_sanity.c
index 4b99ff5a7c36..16507797b3db 100644
--- a/drivers/staging/rt2870/common/cmm_sanity.c
+++ b/drivers/staging/rt2870/common/cmm_sanity.c
@@ -284,9 +284,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT PQOS_CAPABILITY_PARM pQosCapability,
     OUT ULONG *pRalinkIe,
     OUT UCHAR		 *pHtCapabilityLen,
-#ifdef CONFIG_STA_SUPPORT
     OUT UCHAR		 *pPreNHtCapabilityLen,
-#endif // CONFIG_STA_SUPPORT //
     OUT HT_CAPABILITY_IE *pHtCapability,
 	OUT UCHAR		 *AddHtInfoLen,
 	OUT ADD_HT_INFO_IE *AddHtInfo,
@@ -295,9 +293,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     OUT	PNDIS_802_11_VARIABLE_IEs pVIE)
 {
     CHAR				*Ptr;
-#ifdef CONFIG_STA_SUPPORT
 	CHAR 				TimLen;
-#endif // CONFIG_STA_SUPPORT //
     PFRAME_802_11		pFrame;
     PEID_STRUCT         pEid;
     UCHAR				SubType;
@@ -325,10 +321,8 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     *pAironetCellPowerLimit = 0xFF;  // Default of AironetCellPowerLimit is 0xFF
     *LengthVIE = 0;					// Set the length of VIE to init value 0
     *pHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 		*pPreNHtCapabilityLen = 0;					// Set the length of VIE to init value 0
-#endif // CONFIG_STA_SUPPORT //
     *AddHtInfoLen = 0;					// Set the length of VIE to init value 0
     *pRalinkIe = 0;
     *pNewChannel = 0;
@@ -439,7 +433,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&pHtCapability->HtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->HtCapInfo));
 				*(USHORT *)(&pHtCapability->ExtHtCapInfo) = cpu2le16(*(USHORT *)(&pHtCapability->ExtHtCapInfo));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					*pPreNHtCapabilityLen = 0;	// Nnow we only support 26 bytes.
@@ -448,7 +441,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 					NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 					*LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -469,14 +461,12 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 				*(USHORT *)(&AddHtInfo->AddHtInfo2) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo2));
 				*(USHORT *)(&AddHtInfo->AddHtInfo3) = cpu2le16(*(USHORT *)(&AddHtInfo->AddHtInfo3));
 
-#ifdef CONFIG_STA_SUPPORT
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 			                Ptr = (PUCHAR) pVIE;
 			                NdisMoveMemory(Ptr + *LengthVIE, &pEid->Eid, pEid->Len + 2);
 			                *LengthVIE += (pEid->Len + 2);
 				}
-#endif // CONFIG_STA_SUPPORT //
 			}
 			else
 			{
@@ -503,7 +493,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 if(pEid->Len == 1)
                 {
                     *pChannel = *pEid->Octet;
-#ifdef CONFIG_STA_SUPPORT
+
 					IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 					{
 						if (ChannelSanity(pAd, *pChannel) == 0)
@@ -512,7 +502,7 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 							return FALSE;
 						}
 					}
-#endif // CONFIG_STA_SUPPORT //
+
                     Sanity |= 0x4;
                 }
                 else
@@ -550,14 +540,13 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                 }
                 break;
 
-#ifdef CONFIG_STA_SUPPORT
             case IE_TIM:
                 if(INFRA_ON(pAd) && SubType == SUBTYPE_BEACON)
                 {
                     GetTimBit((PUCHAR)pEid, pAd->StaActive.Aid, &TimLen, pBcastFlag, pDtimCount, pDtimPeriod, pMessageToMe);
                 }
                 break;
-#endif // CONFIG_STA_SUPPORT //
+
             case IE_CHANNEL_SWITCH_ANNOUNCEMENT:
                 if(pEid->Len == 3)
                 {
@@ -599,7 +588,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
         			else
         				*pRalinkIe = 0xf0000000; // Set to non-zero value (can't set bit0-2) to represent this is Ralink Chip. So at linkup, we will set ralinkchip flag.
                 }
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 		// This HT IE is before IEEE draft set HT IE value.2006-09-28 by Jan.
 
@@ -620,7 +608,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
                     }
                 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
                 else if (NdisEqualMemory(pEid->Octet, WPA_OUI, 4))
                 {
                     // Copy to pVIE which will report to microsoft bssid list.
@@ -753,7 +740,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
     }
 
     // For some 11a AP. it did not have the channel EID, patch here
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		UCHAR LatchRfChannel = MsgChannel;
@@ -766,7 +752,6 @@ BOOLEAN PeerBeaconAndProbeRspSanity(
 			Sanity |= 0x4;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (Sanity != 0x7)
 	{
@@ -807,10 +792,8 @@ BOOLEAN MlmeScanReqSanity(
 
 	if ((*pBssType == BSS_INFRA || *pBssType == BSS_ADHOC || *pBssType == BSS_ANY)
 		&& (*pScanType == SCAN_ACTIVE || *pScanType == SCAN_PASSIVE
-#ifdef CONFIG_STA_SUPPORT
 		|| *pScanType == SCAN_CISCO_PASSIVE || *pScanType == SCAN_CISCO_ACTIVE
 		|| *pScanType == SCAN_CISCO_CHANNEL_LOAD || *pScanType == SCAN_CISCO_NOISE
-#endif // CONFIG_STA_SUPPORT //
 		))
 	{
 		return TRUE;
diff --git a/drivers/staging/rt2870/common/cmm_sync.c b/drivers/staging/rt2870/common/cmm_sync.c
index 93e03291cbad..ea843e22439c 100644
--- a/drivers/staging/rt2870/common/cmm_sync.c
+++ b/drivers/staging/rt2870/common/cmm_sync.c
@@ -383,27 +383,21 @@ VOID ScanNextChannel(
 	NDIS_STATUS     NStatus;
 	ULONG           FrameLen = 0;
 	UCHAR           SsidLen = 0, ScanType = pAd->MlmeAux.ScanType, BBPValue = 0;
-#ifdef CONFIG_STA_SUPPORT
 	USHORT          Status;
 	PHEADER_802_11  pHdr80211;
-#endif // CONFIG_STA_SUPPORT //
 	UINT			ScanTimeIn5gChannel = SHORT_CHANNEL_TIME;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (MONITOR_ON(pAd))
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (pAd->MlmeAux.Channel == 0)
 	{
 		if ((pAd->CommonCfg.BBPCurrentBW == BW_40)
-#ifdef CONFIG_STA_SUPPORT
 			&& (INFRA_ON(pAd)
 				|| (pAd->OpMode == OPMODE_AP))
-#endif // CONFIG_STA_SUPPORT //
 			)
 		{
 			AsicSwitchChannel(pAd, pAd->CommonCfg.CentralChannel, FALSE);
@@ -421,7 +415,6 @@ VOID ScanNextChannel(
 			DBGPRINT(RT_DEBUG_TRACE, ("SYNC - End of SCAN, restore to channel %d, Total BSS[%02d]\n",pAd->CommonCfg.Channel, pAd->ScanTab.BssNr));
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			//
@@ -452,23 +445,18 @@ VOID ScanNextChannel(
 			Status = MLME_SUCCESS;
 			MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
 
 		RTMP_CLEAR_FLAG(pAd, fRTMP_ADAPTER_BSS_SCAN_IN_PROGRESS);
 	}
 #ifdef RT2870
-#ifdef CONFIG_STA_SUPPORT
 	else if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST) && (pAd->OpMode == OPMODE_STA))
 	{
 		pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 		MlmeCntlConfirm(pAd, MT2_SCAN_CONF, MLME_FAIL_NO_RESOURCE);
 	}
-#endif // CONFIG_STA_SUPPORT //
 #endif // RT2870 //
 	else
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 		// BBP and RF are not accessible in PS mode, we has to wake them up first
@@ -479,12 +467,10 @@ VOID ScanNextChannel(
 			if (pAd->StaCfg.Psm == PWR_SAVE)
 				MlmeSetPsmBit(pAd, PWR_ACTIVE);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		AsicSwitchChannel(pAd, pAd->MlmeAux.Channel, TRUE);
 		AsicLockChannel(pAd, pAd->MlmeAux.Channel);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			if (pAd->MlmeAux.Channel > 14)
@@ -496,7 +482,6 @@ VOID ScanNextChannel(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		//Global country domain(ch1-11:active scan, ch12-14 passive scan)
 		if ((pAd->MlmeAux.Channel <= 14) && (pAd->MlmeAux.Channel >= 12) && ((pAd->CommonCfg.CountryRegion & 0x7f) == REGION_31_BG_BAND))
@@ -508,7 +493,6 @@ VOID ScanNextChannel(
 		// Chnage the channel scan time for CISCO stuff based on its IAPP announcement
 		if (ScanType == FAST_SCAN_ACTIVE)
 			RTMPSetTimer(&pAd->MlmeAux.ScanTimer, FAST_ACTIVE_SCAN_TIME);
-#ifdef CONFIG_STA_SUPPORT
 		else if (((ScanType == SCAN_CISCO_ACTIVE) ||
 				(ScanType == SCAN_CISCO_PASSIVE) ||
 				(ScanType == SCAN_CISCO_CHANNEL_LOAD) ||
@@ -519,7 +503,6 @@ VOID ScanNextChannel(
 			else
 				RTMPSetTimer(&pAd->MlmeAux.ScanTimer, pAd->StaCfg.CCXScanTime);
 		}
-#endif // CONFIG_STA_SUPPORT //
 		else // must be SCAN_PASSIVE or SCAN_ACTIVE
 		{
 			if ((pAd->CommonCfg.PhyMode == PHY_11ABG_MIXED)
@@ -544,14 +527,13 @@ VOID ScanNextChannel(
 			if (NStatus != NDIS_STATUS_SUCCESS)
 			{
 				DBGPRINT(RT_DEBUG_TRACE, ("SYNC - ScanNextChannel() allocate memory fail\n"));
-#ifdef CONFIG_STA_SUPPORT
+
 				IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				{
 					pAd->Mlme.SyncMachine.CurrState = SYNC_IDLE;
 					Status = MLME_FAIL_NO_RESOURCE;
 					MlmeEnqueue(pAd, MLME_CNTL_STATE_MACHINE, MT2_SCAN_CONF, 2, &Status);
 				}
-#endif // CONFIG_STA_SUPPORT //
 
 				return;
 			}
@@ -624,11 +606,8 @@ VOID ScanNextChannel(
 
 		// For SCAN_CISCO_PASSIVE, do nothing and silently wait for beacon or other probe reponse
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			pAd->Mlme.SyncMachine.CurrState = SCAN_LISTEN;
-#endif // CONFIG_STA_SUPPORT //
-
 	}
 }
 
diff --git a/drivers/staging/rt2870/common/cmm_wpa.c b/drivers/staging/rt2870/common/cmm_wpa.c
index d2c24bd49e75..076568e0c265 100644
--- a/drivers/staging/rt2870/common/cmm_wpa.c
+++ b/drivers/staging/rt2870/common/cmm_wpa.c
@@ -370,7 +370,6 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -386,7 +385,6 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
@@ -448,7 +446,6 @@ static VOID RTMPInsertRsnIeCipher(
                 break;
         }
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption2Enabled) &&
 			(pAd->StaCfg.GroupCipher != Ndis802_11Encryption3Enabled))
@@ -464,7 +461,6 @@ static VOID RTMPInsertRsnIeCipher(
 					break;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		// swap for big-endian platform
 		pRsnie_cipher->version = cpu2le16(pRsnie_cipher->version);
@@ -627,7 +623,6 @@ VOID RTMPMakeRSNIE(
 	rsnielen_ex_cur_p = NULL;
 
 	{
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef WPA_SUPPLICANT_SUPPORT
@@ -660,7 +655,6 @@ VOID RTMPMakeRSNIE(
 
 			bMixCipher = pAd->StaCfg.bMixCipher;
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// indicate primary RSNIE as WPA or WPA2
@@ -1131,11 +1125,6 @@ BOOLEAN RTMPParseEapolKeyData(
         return FALSE;
     }
 
-
-#ifdef CONFIG_STA_SUPPORT
-	// Todo
-#endif // CONFIG_STA_SUPPORT //
-
 	return TRUE;
 
 }
diff --git a/drivers/staging/rt2870/common/mlme.c b/drivers/staging/rt2870/common/mlme.c
index 54ae2a3adc5d..fe9dac863b1a 100644
--- a/drivers/staging/rt2870/common/mlme.c
+++ b/drivers/staging/rt2870/common/mlme.c
@@ -50,11 +50,9 @@ UCHAR	Ccx2QosInfo[] = {0x00, 0x40, 0x96, 0x04};
 UCHAR   RALINK_OUI[]  = {0x00, 0x0c, 0x43};
 UCHAR   BROADCOM_OUI[]  = {0x00, 0x90, 0x4c};
 UCHAR   WPS_OUI[] = {0x00, 0x50, 0xf2, 0x04};
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 UCHAR	PRE_N_HT_OUI[]	= {0x00, 0x90, 0x4c};
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 UCHAR RateSwitchTable[] = {
 // Item No.   Mode   Curr-MCS   TrainUp   TrainDown		// Mode- Bit0: STBC, Bit1: Short GI, Bit4,5: Mode(0:CCK, 1:OFDM, 2:HT Mix, 3:HT GF)
@@ -494,7 +492,6 @@ NDIS_STATUS MlmeInit(
 		pAd->Mlme.bRunning = FALSE;
 		NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			BssTableInit(&pAd->ScanTab);
@@ -511,9 +508,6 @@ NDIS_STATUS MlmeInit(
 			// state machine init
 			MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
 		}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 		ActionStateMachineInit(pAd, &pAd->Mlme.ActMachine, pAd->Mlme.ActFunc);
 
@@ -595,7 +589,6 @@ VOID MlmeHandler(
 			switch (Elem->Machine)
 			{
 				// STA state machines
-#ifdef	CONFIG_STA_SUPPORT
 				case ASSOC_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AssocMachine, Elem);
 					break;
@@ -617,8 +610,6 @@ VOID MlmeHandler(
 				case AIRONET_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.AironetMachine, Elem);
 					break;
-#endif // CONFIG_STA_SUPPORT //
-
 				case ACTION_STATE_MACHINE:
 					StateMachinePerformAction(pAd, &pAd->Mlme.ActMachine, Elem);
 					break;
@@ -672,7 +663,6 @@ VOID MlmeHalt(
 		AsicDisableSync(pAd);
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel pending timers
@@ -683,7 +673,6 @@ VOID MlmeHalt(
 		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,		&Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,		&Cancelled);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMPCancelTimer(&pAd->Mlme.PeriodicTimer,		&Cancelled);
 	RTMPCancelTimer(&pAd->Mlme.RxAntEvalTimer,		&Cancelled);
@@ -786,7 +775,6 @@ VOID MlmePeriodicExec(
 
 	RT28XX_MLME_PRE_SANITY_CHECK(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Do nothing if monitor mode is on
@@ -812,7 +800,6 @@ VOID MlmePeriodicExec(
 				}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->bUpdateBcnCntDone = FALSE;
 
@@ -822,7 +809,6 @@ VOID MlmePeriodicExec(
 	// execute every 500ms
 	if ((pAd->Mlme.PeriodicRound % 5 == 0) && RTMPAutoRateSwitchCheck(pAd)/*(OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_TX_RATE_SWITCH_ENABLED))*/)
 	{
-#ifdef CONFIG_STA_SUPPORT
 		// perform dynamic tx rate switching based on past TX history
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
@@ -831,7 +817,6 @@ VOID MlmePeriodicExec(
 				&& (!OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_DOZE)))
 				MlmeDynamicTxRateSwitching(pAd);
 		}
-#endif // CONFIG_STA_SUPPORT //
 	}
 
 	// Normal 1 second Mlme PeriodicExec.
@@ -912,14 +897,11 @@ VOID MlmePeriodicExec(
 			}
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			STAMlmePeriodicExec(pAd);
-#endif // CONFIG_STA_SUPPORT //
 
 		MlmeResetRalinkCounters(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			{
@@ -943,7 +925,6 @@ VOID MlmePeriodicExec(
 				}
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		RT28XX_MLME_HANDLER(pAd);
 	}
@@ -952,7 +933,6 @@ VOID MlmePeriodicExec(
 	pAd->bUpdateBcnCntDone = FALSE;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 VOID STAMlmePeriodicExec(
 	PRTMP_ADAPTER pAd)
 {
@@ -1243,7 +1223,6 @@ VOID MlmeAutoReconnectLastSSID(
 		RT28XX_MLME_HANDLER(pAd);
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	==========================================================================
@@ -1292,7 +1271,6 @@ VOID MlmeSelectTxRateTable(
 			break;
 		}
 
-#ifdef CONFIG_STA_SUPPORT
 		if ((pAd->OpMode == OPMODE_STA) && ADHOC_ON(pAd))
 		{
 #ifdef DOT11_N_SUPPORT
@@ -1353,7 +1331,6 @@ VOID MlmeSelectTxRateTable(
 			}
 			break;
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef DOT11_N_SUPPORT
 		//if ((pAd->StaActive.SupRateLen + pAd->StaActive.ExtRateLen == 12) && (pAd->StaActive.SupportedPhyInfo.MCSSet[0] == 0xff) &&
@@ -1463,7 +1440,6 @@ VOID MlmeSelectTxRateTable(
 #ifdef DOT11_N_SUPPORT
 #endif // DOT11_N_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 #ifdef DOT11_N_SUPPORT
@@ -1531,11 +1507,9 @@ VOID MlmeSelectTxRateTable(
 			DBGPRINT_RAW(RT_DEBUG_ERROR,("DRS: unkown mode (SupRateLen=%d, ExtRateLen=%d, MCSSet[0]=0x%x, MCSSet[1]=0x%x)\n",
 				pAd->StaActive.SupRateLen, pAd->StaActive.ExtRateLen, pAd->StaActive.SupportedPhyInfo.MCSSet[0], pAd->StaActive.SupportedPhyInfo.MCSSet[1]));
 		}
-#endif // CONFIG_STA_SUPPORT //
 	} while(FALSE);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -2658,8 +2632,6 @@ VOID MlmeSetPsmBit(
 	RTMP_IO_WRITE32(pAd, AUTO_RSP_CFG, csr4.word);
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeSetPsmBit = %d\n", psm));
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 // IRQL = DISPATCH_LEVEL
 VOID MlmeSetTxPreamble(
@@ -2798,8 +2770,6 @@ VOID MlmeUpdateTxRates(
 
 //===========================================================================
 //===========================================================================
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pHtPhy 		= &pAd->StaCfg.HTPhyMode;
@@ -2816,7 +2786,6 @@ VOID MlmeUpdateTxRates(
 			MaxDesire = RATE_11;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	pAd->CommonCfg.MaxDesiredRate = MaxDesire;
 	pMinHtPhy->word = 0;
@@ -2853,7 +2822,6 @@ VOID MlmeUpdateTxRates(
 	}
 #endif
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		pSupRate = &pAd->StaActive.SupRate[0];
@@ -2862,7 +2830,6 @@ VOID MlmeUpdateTxRates(
 		ExtRateLen = pAd->StaActive.ExtRateLen;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		pSupRate = &pAd->CommonCfg.SupRate[0];
 		pExtRate = &pAd->CommonCfg.ExtRate[0];
@@ -2950,10 +2917,10 @@ VOID MlmeUpdateTxRates(
 	if (*auto_rate_cur_p)
 	{
 		short dbm = 0;
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			dbm = pAd->StaCfg.RssiSample.AvgRssi0 - pAd->BbpRssiToDbmDelta;
-#endif // CONFIG_STA_SUPPORT //
+
 		if (bLinkUp == TRUE)
 			pAd->CommonCfg.TxRate = RATE_24;
 		else
@@ -3117,7 +3084,6 @@ VOID MlmeUpdateHtTxRates(
 
 	auto_rate_cur_p = NULL;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		pDesireHtPhy	= &pAd->StaCfg.DesiredHtPhyInfo;
@@ -3128,9 +3094,7 @@ VOID MlmeUpdateHtTxRates(
 
 		auto_rate_cur_p = &pAd->StaCfg.bAutoTxRateSwitch;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 	if ((ADHOC_ON(pAd) || INFRA_ON(pAd)) && (pAd->OpMode == OPMODE_STA))
 	{
 		if (pAd->StaActive.SupportedPhyInfo.bHtEnable == FALSE)
@@ -3146,7 +3110,6 @@ VOID MlmeUpdateHtTxRates(
 			pMaxHtPhy->field.STBC = STBC_NONE;
 	}
 	else
-#endif // CONFIG_STA_SUPPORT //
 	{
 		if (pDesireHtPhy->bHtEnable == FALSE)
 			return;
@@ -3197,7 +3160,6 @@ VOID MlmeUpdateHtTxRates(
 	pMinHtPhy->field.STBC = 0;
 	pMinHtPhy->field.ShortGI = 0;
 	//If STA assigns fixed rate. update to fixed here.
-#ifdef CONFIG_STA_SUPPORT
 	if ( (pAd->OpMode == OPMODE_STA) && (pDesireHtPhy->MCSSet[0] != 0xff))
 	{
 		if (pDesireHtPhy->MCSSet[4] != 0)
@@ -3221,8 +3183,6 @@ VOID MlmeUpdateHtTxRates(
 				break;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 
 	// Decide ht rate
 	pHtPhy->field.STBC = pMaxHtPhy->field.STBC;
@@ -3604,7 +3564,6 @@ VOID BssEntrySet(
 	else
 		pBss->QbssLoad.bValid = FALSE;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		PEID_STRUCT     pEid;
@@ -3649,7 +3608,6 @@ VOID BssEntrySet(
 			pEid = (PEID_STRUCT)((UCHAR*)pEid + 2 + pEid->Len);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 }
 
 /*!
@@ -3751,7 +3709,6 @@ ULONG BssTableSetEntry(
 	return Idx;
 }
 
-#ifdef CONFIG_STA_SUPPORT
 // IRQL = DISPATCH_LEVEL
 VOID BssTableSsidSort(
 	IN	PRTMP_ADAPTER	pAd,
@@ -4006,8 +3963,6 @@ VOID BssTableSortByRssi(
 		}
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
-
 
 VOID BssCipherParse(
 	IN OUT	PBSS_ENTRY	pBss)
@@ -4413,10 +4368,10 @@ VOID MgtMacHeaderInit(
 //		pHdr80211->FC.Type = BTYPE_CNTL;
 	pHdr80211->FC.ToDs = ToDs;
 	COPY_MAC_ADDR(pHdr80211->Addr1, pDA);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		COPY_MAC_ADDR(pHdr80211->Addr2, pAd->CurrentAddress);
-#endif // CONFIG_STA_SUPPORT //
+
 	COPY_MAC_ADDR(pHdr80211->Addr3, pBssid);
 }
 
@@ -4623,7 +4578,6 @@ BOOLEAN MlmeEnqueueForRecv(
 		return FALSE;
 	}
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (!MsgTypeSubst(pAd, pFrame, &Machine, &MsgType))
@@ -4632,7 +4586,6 @@ BOOLEAN MlmeEnqueueForRecv(
 			return FALSE;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// OK, we got all the informations, it is time to put things into queue
 	NdisAcquireSpinLock(&(Queue->Lock));
@@ -4700,14 +4653,10 @@ BOOLEAN MlmeDequeue(
 VOID	MlmeRestartStateMachine(
 	IN	PRTMP_ADAPTER	pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
 	BOOLEAN				Cancelled;
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("MlmeRestartStateMachine \n"));
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Cancel all timer events
@@ -4719,7 +4668,6 @@ VOID	MlmeRestartStateMachine(
 		RTMPCancelTimer(&pAd->MlmeAux.BeaconTimer,	   &Cancelled);
 		RTMPCancelTimer(&pAd->MlmeAux.ScanTimer,	   &Cancelled);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Change back to original channel in case of doing scan
 	AsicSwitchChannel(pAd, pAd->CommonCfg.Channel, FALSE);
@@ -4728,7 +4676,6 @@ VOID	MlmeRestartStateMachine(
 	// Resume MSDU which is turned off durning scan
 	RTMPResumeMsduTransmission(pAd);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Set all state machines back IDLE
@@ -4739,8 +4686,6 @@ VOID	MlmeRestartStateMachine(
 		pAd->Mlme.SyncMachine.CurrState    = SYNC_IDLE;
 		pAd->Mlme.ActMachine.CurrState    = ACT_IDLE;
 	}
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 /*! \brief	test if the MLME Queue is empty
@@ -4818,7 +4763,6 @@ VOID MlmeQueueDestroy(
  IRQL = DISPATCH_LEVEL
 
  */
-#ifdef CONFIG_STA_SUPPORT
 BOOLEAN MsgTypeSubst(
 	IN PRTMP_ADAPTER  pAd,
 	IN PFRAME_802_11 pFrame,
@@ -4928,7 +4872,6 @@ BOOLEAN MsgTypeSubst(
 
 	return TRUE;
 }
-#endif // CONFIG_STA_SUPPORT //
 
 // ===========================================================================================
 // state_machine.c
@@ -6107,7 +6050,6 @@ VOID AsicAdjustTxPower(
 
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -6158,7 +6100,7 @@ VOID AsicForceWakeup(
     DBGPRINT(RT_DEBUG_TRACE, ("--> AsicForceWakeup \n"));
     RT28XX_STA_FORCE_WAKEUP(pAd, bFromTx);
 }
-#endif // CONFIG_STA_SUPPORT //
+
 /*
 	==========================================================================
 	Description:
@@ -6336,7 +6278,7 @@ VOID AsicEnableBssSync(
 
 	RTMP_IO_READ32(pAd, BCN_TIME_CFG, &csr.word);
 //	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, 0x00000000);
-#ifdef CONFIG_STA_SUPPORT
+
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		csr.field.BeaconInterval = pAd->CommonCfg.BeaconPeriod << 4; // ASIC register in units of 1/16 TU
@@ -6345,7 +6287,7 @@ VOID AsicEnableBssSync(
 		csr.field.bBeaconGen  = 0; // do NOT generate BEACON
 		csr.field.bTBTTEnable = 1;
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	RTMP_IO_WRITE32(pAd, BCN_TIME_CFG, csr.word);
 }
 
@@ -6555,7 +6497,7 @@ VOID AsicSetEdcaParm(
 		Ac2Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VI];
 		Ac2Cfg.field.Cwmax = pEdcaParm->Cwmax[QID_AC_VI];
 		Ac2Cfg.field.Aifsn = pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
@@ -6572,7 +6514,6 @@ VOID AsicSetEdcaParm(
 				Ac2Cfg.field.AcTxop = 5;
 			}
 		}
-#endif // CONFIG_STA_SUPPORT //
 
 		Ac3Cfg.field.AcTxop = pEdcaParm->Txop[QID_AC_VO];
 		Ac3Cfg.field.Cwmin = pEdcaParm->Cwmin[QID_AC_VO];
@@ -6614,10 +6555,10 @@ VOID AsicSetEdcaParm(
 		CwminCsr.field.Cwmin0 = pEdcaParm->Cwmin[QID_AC_BE];
 		CwminCsr.field.Cwmin1 = pEdcaParm->Cwmin[QID_AC_BK];
 		CwminCsr.field.Cwmin2 = pEdcaParm->Cwmin[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			CwminCsr.field.Cwmin3 = pEdcaParm->Cwmin[QID_AC_VO] - 1; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
 		RTMP_IO_WRITE32(pAd, WMM_CWMIN_CFG, CwminCsr.word);
 
 		CwmaxCsr.word = 0;
@@ -6631,7 +6572,7 @@ VOID AsicSetEdcaParm(
 		AifsnCsr.field.Aifsn0 = Ac0Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BE];
 		AifsnCsr.field.Aifsn1 = Ac1Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_BK];
 		AifsnCsr.field.Aifsn2 = Ac2Cfg.field.Aifsn; //pEdcaParm->Aifsn[QID_AC_VI];
-#ifdef CONFIG_STA_SUPPORT
+
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 		{
 			// Tuning for Wi-Fi WMM S06
@@ -6651,12 +6592,10 @@ VOID AsicSetEdcaParm(
 			if (INFRA_ON(pAd))
 				CLIENT_STATUS_SET_FLAG(&pAd->MacTab.Content[BSSID_WCID], fCLIENT_STATUS_WMM_CAPABLE);
 		}
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 		IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 			AifsnCsr.field.Aifsn3 = Ac3Cfg.field.Aifsn - 1; //pEdcaParm->Aifsn[QID_AC_VO]; //for TGn wifi test
-#endif // CONFIG_STA_SUPPORT //
+
 		RTMP_IO_WRITE32(pAd, WMM_AIFSN_CFG, AifsnCsr.word);
 
 		NdisMoveMemory(&pAd->CommonCfg.APEdcaParm, pEdcaParm, sizeof(EDCA_PARM));
@@ -6707,10 +6646,8 @@ VOID 	AsicSetSlotTime(
 	ULONG	SlotTime;
 	UINT32	RegValue = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->CommonCfg.Channel > 14)
 		bUseShortSlotTime = TRUE;
-#endif // CONFIG_STA_SUPPORT //
 
 	if (bUseShortSlotTime)
 		OPSTATUS_SET_FLAG(pAd, fOP_STATUS_SHORT_SLOT_INUSED);
@@ -6719,7 +6656,6 @@ VOID 	AsicSetSlotTime(
 
 	SlotTime = (bUseShortSlotTime)? 9 : 20;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// force using short SLOT time for FAE to demo performance when TxBurst is ON
@@ -6735,20 +6671,17 @@ VOID 	AsicSetSlotTime(
 		else if (pAd->CommonCfg.bEnableTxBurst)
 			SlotTime = 9;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	//
 	// For some reasons, always set it to short slot time.
 	//
 	// ToDo: Should consider capability with 11B
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.BssType == BSS_ADHOC)
 			SlotTime = 20;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_IO_READ32(pAd, BKOFF_SLOT_CFG, &RegValue);
 	RegValue = RegValue & 0xFFFFFF00;
@@ -7269,7 +7202,6 @@ VOID	RTMPCheckRates(
 	NdisMoveMemory(SupRate, NewRate, NewRateLen);
 }
 
-#ifdef CONFIG_STA_SUPPORT
 #ifdef DOT11_N_SUPPORT
 BOOLEAN RTMPCheckChannel(
 	IN PRTMP_ADAPTER pAd,
@@ -7417,7 +7349,6 @@ BOOLEAN 	RTMPCheckHt(
 	return TRUE;
 }
 #endif // DOT11_N_SUPPORT //
-#endif // CONFIG_STA_SUPPORT //
 
 /*
 	========================================================================
@@ -7601,7 +7532,6 @@ VOID AsicEvaluateRxAnt(
 {
 	UCHAR	BBPR3 = 0;
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS	|
@@ -7614,7 +7544,6 @@ VOID AsicEvaluateRxAnt(
 		if (pAd->StaCfg.Psm == PWR_SAVE)
 			return;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	RTMP_BBP_IO_READ8_BY_REG_ID(pAd, BBP_R3, &BBPR3);
 	BBPR3 &= (~0x18);
@@ -7631,8 +7560,7 @@ VOID AsicEvaluateRxAnt(
 		BBPR3 |= (0x0);
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
+
 	if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED)
 		)
 	{
@@ -7673,12 +7601,9 @@ VOID AsicRxAntEvalTimeout(
 	IN PVOID SystemSpecific3)
 {
 	RTMP_ADAPTER	*pAd = (RTMP_ADAPTER *)FunctionContext;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR			BBPR3 = 0;
 	CHAR			larger = -127, rssi0, rssi1, rssi2;
-#endif // CONFIG_STA_SUPPORT //
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RESET_IN_PROGRESS)	||
@@ -7738,9 +7663,6 @@ VOID AsicRxAntEvalTimeout(
 		}
 		RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 	}
-
-#endif // CONFIG_STA_SUPPORT //
-
 }
 
 
@@ -7819,8 +7741,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 {
 	BOOLEAN		result = TRUE;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// only associated STA counts
@@ -7831,9 +7751,6 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 		else
 			result = FALSE;
 	}
-#endif // CONFIG_STA_SUPPORT //
-
-
 
 	return result;
 }
@@ -7842,14 +7759,12 @@ BOOLEAN RTMPCheckEntryEnableAutoRateSwitch(
 BOOLEAN RTMPAutoRateSwitchCheck(
 	IN PRTMP_ADAPTER    pAd)
 {
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bAutoTxRateSwitch)
 			return TRUE;
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	return FALSE;
 }
 
@@ -7875,13 +7790,10 @@ UCHAR RTMPStaFixedTxMode(
 {
 	UCHAR	tx_mode = FIXED_TXMODE_HT;
 
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		tx_mode = (UCHAR)pAd->StaCfg.DesiredTransmitSetting.field.FixedTxMode;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return tx_mode;
 }
@@ -7938,7 +7850,6 @@ VOID RTMPUpdateLegacyTxSetting(
 	}
 }
 
-#ifdef CONFIG_STA_SUPPORT
 /*
 	==========================================================================
 	Description:
@@ -8069,7 +7980,6 @@ VOID AsicStaBbpTuning(
 
 	}
 }
-#endif // CONFIG_STA_SUPPORT //
 
 VOID RTMPSetAGCInitValue(
 	IN PRTMP_ADAPTER	pAd,
diff --git a/drivers/staging/rt2870/common/rtmp_init.c b/drivers/staging/rt2870/common/rtmp_init.c
index 98aa99296857..4775c17e9834 100644
--- a/drivers/staging/rt2870/common/rtmp_init.c
+++ b/drivers/staging/rt2870/common/rtmp_init.c
@@ -211,19 +211,14 @@ RTMP_REG_PAIR	MACRegTable[] =	{
 	{PWR_PIN_CFG,			0x00000003},	// patch for 2880-E
 };
 
-
-#ifdef CONFIG_STA_SUPPORT
 RTMP_REG_PAIR	STAMACRegTable[] =	{
 	{WMM_AIFSN_CFG,		0x00002273},
 	{WMM_CWMIN_CFG,	0x00002344},
 	{WMM_CWMAX_CFG,	0x000034aa},
 };
-#endif // CONFIG_STA_SUPPORT //
 
 #define	NUM_MAC_REG_PARMS		(sizeof(MACRegTable) / sizeof(RTMP_REG_PAIR))
-#ifdef CONFIG_STA_SUPPORT
 #define	NUM_STA_MAC_REG_PARMS	(sizeof(STAMACRegTable) / sizeof(RTMP_REG_PAIR))
-#endif // CONFIG_STA_SUPPORT //
 
 #ifdef RT2870
 //
@@ -1476,9 +1471,6 @@ VOID	NICReadEEPROMParameters(
 
 	NicConfig2.word = pAd->EEPROMDefaultValue[1];
 
-
-
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		NicConfig2.word = 0;
@@ -1492,7 +1484,6 @@ VOID	NICReadEEPROMParameters(
 			NicConfig2.word &= 0x00ff;
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	if (NicConfig2.field.DynamicTxAgcControl == 1)
 		pAd->bAutoTxAgcA = pAd->bAutoTxAgcG = TRUE;
@@ -1703,10 +1694,8 @@ VOID	NICReadEEPROMParameters(
 VOID	NICInitAsicFromEEPROM(
 	IN	PRTMP_ADAPTER	pAd)
 {
-#ifdef CONFIG_STA_SUPPORT
 	UINT32					data = 0;
 	UCHAR	BBPR1 = 0;
-#endif // CONFIG_STA_SUPPORT //
 	USHORT					i;
 	EEPROM_ANTENNA_STRUC	Antenna;
 	EEPROM_NIC_CONFIG2_STRUC    NicConfig2;
@@ -1755,7 +1744,6 @@ VOID	NICInitAsicFromEEPROM(
     pAd->LedIndicatorStregth = 0xFF;
     RTMPSetSignalLED(pAd, -100);	// Force signal strength Led to be turned off, before link up
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Read Hardware controlled Radio state enable bit
@@ -1785,7 +1773,6 @@ VOID	NICInitAsicFromEEPROM(
 			RTMPSetLED(pAd, LED_RADIO_ON);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Turn off patching for cardbus controller
 	if (NicConfig2.field.CardbusAcceleration == 1)
@@ -1819,7 +1806,6 @@ VOID	NICInitAsicFromEEPROM(
 	}
 	RTMP_BBP_IO_WRITE8_BY_REG_ID(pAd, BBP_R3, BBPR3);
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// Handle the difference when 1T
@@ -1832,7 +1818,7 @@ VOID	NICInitAsicFromEEPROM(
 
 		DBGPRINT(RT_DEBUG_TRACE, ("Use Hw Radio Control Pin=%d; if used Pin=%d;\n", pAd->CommonCfg.bHardwareRadio, pAd->CommonCfg.bHardwareRadio));
 	}
-#endif // CONFIG_STA_SUPPORT //
+
 	DBGPRINT(RT_DEBUG_TRACE, ("TxPath = %d, RxPath = %d, RFIC=%d, Polar+LED mode=%x\n", pAd->Antenna.field.TxPath, pAd->Antenna.field.RxPath, pAd->RfIcType, pAd->LedCntl.word));
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitAsicFromEEPROM\n"));
 }
@@ -2025,7 +2011,6 @@ NDIS_STATUS	NICInitializeAsic(
 	}
 
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		for (Index = 0; Index < NUM_STA_MAC_REG_PARMS; Index++)
@@ -2033,7 +2018,6 @@ NDIS_STATUS	NICInitializeAsic(
 			RTMP_IO_WRITE32(pAd, (USHORT)STAMACRegTable[Index].Register, STAMACRegTable[Index].Value);
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 #endif // RT2870 //
 
 	//
@@ -2119,7 +2103,6 @@ NDIS_STATUS	NICInitializeAsic(
 #endif // RT2870 //
 
 	// Add radio off control
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		if (pAd->StaCfg.bRadio == FALSE)
@@ -2129,7 +2112,6 @@ NDIS_STATUS	NICInitializeAsic(
 			DBGPRINT(RT_DEBUG_TRACE, ("Set Radio Off\n"));
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Clear raw counters
 	RTMP_IO_READ32(pAd, RX_STA_CNT0, &Counter);
@@ -2186,14 +2168,12 @@ NDIS_STATUS	NICInitializeAsic(
 	RTMP_IO_WRITE32(pAd, USB_CYC_CFG, Counter);
 #endif // RT2870 //
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// for rt2860E and after, init TXOP_CTRL_CFG with 0x583f. This is for extension channel overlapping IOT.
 		if ((pAd->MACVersion&0xffff) != 0x0101)
 			RTMP_IO_WRITE32(pAd, TXOP_CTRL_CFG, 0x583f);
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	DBGPRINT(RT_DEBUG_TRACE, ("<-- NICInitializeAsic\n"));
 	return NDIS_STATUS_SUCCESS;
@@ -3254,7 +3234,6 @@ VOID	UserCfgInit(
 	//
 	// part II. intialize STA specific configuration
 	//
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		RX_FILTER_SET_FLAG(pAd, fRX_FILTER_ACCEPT_DIRECT);
@@ -3293,7 +3272,6 @@ VOID	UserCfgInit(
 		pAd->StaCfg.bAutoTxRateSwitch = TRUE;
 		pAd->StaCfg.DesiredTransmitSetting.field.MCS = MCS_AUTO;
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// global variables mXXXX used in MAC protocol state machines
 	OPSTATUS_SET_FLAG(pAd, fOP_STATUS_RECEIVE_DTIM);
@@ -3304,7 +3282,6 @@ VOID	UserCfgInit(
 	pAd->CommonCfg.PhyMode = PHY_11BG_MIXED;		// default PHY mode
 	OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_SHORT_PREAMBLE_INUSED);  // CCK use LONG preamble
 
-#ifdef CONFIG_STA_SUPPORT
 	IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 	{
 		// user desired power mode
@@ -3349,7 +3326,6 @@ VOID	UserCfgInit(
 #endif // WPA_SUPPLICANT_SUPPORT //
 
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	// Default for extra information is not valid
 	pAd->ExtraInfo = EXTRA_INFO_CLEAR;
diff --git a/drivers/staging/rt2870/common/rtmp_tkip.c b/drivers/staging/rt2870/common/rtmp_tkip.c
index 013849a3d89d..61f4020aee88 100644
--- a/drivers/staging/rt2870/common/rtmp_tkip.c
+++ b/drivers/staging/rt2870/common/rtmp_tkip.c
@@ -691,9 +691,6 @@ VOID	RTMPCalculateMICValue(
 	// determine if this is a vlan packet
 	if (((*(pSrc + 12) << 8) + *(pSrc + 13)) == 0x8100)
 		vlan_offset = 4;
-
-#ifdef CONFIG_STA_SUPPORT
-#endif // CONFIG_STA_SUPPORT //
 	{
 		RTMPInitMICEngine(
 			pAd,
diff --git a/drivers/staging/rt2870/common/rtmp_wep.c b/drivers/staging/rt2870/common/rtmp_wep.c
index 62f9e58729d7..7c61fbad6ebd 100644
--- a/drivers/staging/rt2870/common/rtmp_wep.c
+++ b/drivers/staging/rt2870/common/rtmp_wep.c
@@ -153,14 +153,12 @@ VOID	RTMPInitWepEngine(
 
 	pAd->PrivateInfo.FCSCRC32 = PPPINITFCS32;   //Init crc32.
 
-#ifdef CONFIG_STA_SUPPORT
     if (pAd->StaCfg.bCkipOn && (pAd->StaCfg.CkipFlag & 0x10) && (pAd->OpMode == OPMODE_STA))
     {
         ARCFOUR_INIT(&pAd->PrivateInfo.WEPCONTEXT, pKey, KeyLen);  //INIT SBOX, KEYLEN+3(IV)
         NdisMoveMemory(pDest, pKey, 3);  //Append Init Vector
     }
     else
-#endif // CONFIG_STA_SUPPORT //
     {
 		NdisMoveMemory(WEPKEY + 3, pKey, KeyLen);
 
diff --git a/drivers/staging/rt2870/common/rtusb_bulk.c b/drivers/staging/rt2870/common/rtusb_bulk.c
index 7053c2617119..f3e240846587 100644
--- a/drivers/staging/rt2870/common/rtusb_bulk.c
+++ b/drivers/staging/rt2870/common/rtusb_bulk.c
@@ -1211,9 +1211,7 @@ VOID	RTUSBBulkReceive(
 		RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
 
 		// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
 		STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
 
 		//return;
 	}
@@ -1239,9 +1237,7 @@ VOID	RTUSBBulkReceive(
 	}
 
 	// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
 	STARxDoneInterruptHandle(pAd, FALSE);
-#endif // CONFIG_STA_SUPPORT //
 }
 
 /*
@@ -1463,10 +1459,8 @@ VOID	RTUSBBulkReceive(
 			RTMP_IRQ_UNLOCK(&pAd->BulkInLock, IrqFlags);
 
 			// read RxContext, Since not
-#ifdef CONFIG_STA_SUPPORT
 			IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 				STARxDoneInterruptHandle(pAd, TRUE);
-#endif // CONFIG_STA_SUPPORT //
 
 			// Finish to handle this bulkIn buffer.
 			RTMP_IRQ_LOCK(&pAd->BulkInLock, IrqFlags);
diff --git a/drivers/staging/rt2870/common/rtusb_io.c b/drivers/staging/rt2870/common/rtusb_io.c
index 3c4d41891b6f..9b98ff8548e4 100644
--- a/drivers/staging/rt2870/common/rtusb_io.c
+++ b/drivers/staging/rt2870/common/rtusb_io.c
@@ -1303,12 +1303,7 @@ VOID CMDHandler(
 			{
 				case CMDTHREAD_CHECK_GPIO:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT32 data;
-#endif // CONFIG_STA_SUPPORT //
-
-#ifdef CONFIG_STA_SUPPORT
-
 
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
@@ -1346,17 +1341,14 @@ VOID CMDHandler(
 								}
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
-#ifdef CONFIG_STA_SUPPORT
 				case CMDTHREAD_QKERIODIC_EXECUT:
 					{
 						StaQuickResponeForRateUpExec(NULL, pAd, NULL, NULL);
 					}
 					break;
-#endif // CONFIG_STA_SUPPORT //
 
 				case CMDTHREAD_RESET_BULK_OUT:
 					{
@@ -1696,7 +1688,6 @@ VOID CMDHandler(
 
 				case CMDTHREAD_SET_ASIC_WCID_CIPHER:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						RT_SET_ASIC_WCID_ATTRI	SetAsicWcidAttri;
 						USHORT		offset;
 						UINT32		MACRValue = 0;
@@ -1748,7 +1739,6 @@ VOID CMDHandler(
 
 							RTUSBWriteMACRegister(pAd, SHARED_KEY_MODE_BASE+4*(0/2), csr1.word);
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
@@ -1757,8 +1747,6 @@ VOID CMDHandler(
 						MAC_TABLE_ENTRY *pEntry;
 						pEntry = (MAC_TABLE_ENTRY *)pData;
 
-
-#ifdef CONFIG_STA_SUPPORT
 						IF_DEV_CONFIG_OPMODE_ON_STA(pAd)
 						{
 							AsicRemovePairwiseKeyEntry(pAd, pEntry->apidx, (UCHAR)pEntry->Aid);
@@ -1794,7 +1782,6 @@ VOID CMDHandler(
 								RTUSBWriteMACRegister(pAd, offset, 0);
 							}
 						}
-#endif // CONFIG_STA_SUPPORT //
 
 						AsicUpdateRxWCIDTable(pAd, pEntry->Aid, pEntry->Addr);
 						printk("UpdateRxWCIDTable(): Aid=%d, Addr=%02x:%02x:%02x:%02x:%02x:%02x!\n", pEntry->Aid,
@@ -1804,7 +1791,6 @@ VOID CMDHandler(
 
 				case OID_802_11_ADD_WEP:
 					{
-#ifdef CONFIG_STA_SUPPORT
 						UINT	i;
 						UINT32	KeyIdx;
 						PNDIS_802_11_WEP	pWepKey;
@@ -1878,7 +1864,6 @@ VOID CMDHandler(
 							AsicAddSharedKeyEntry(pAd, BSS0, (UCHAR)KeyIdx, CipherAlg, pWepKey->KeyMaterial, NULL, NULL);
 							DBGPRINT(RT_DEBUG_TRACE, ("CmdThread::OID_802_11_ADD_WEP (KeyIdx=%d, Len=%d-byte)\n", KeyIdx, pWepKey->KeyLength));
 						}
-#endif // CONFIG_STA_SUPPORT //
 					}
 					break;
 
diff --git a/drivers/staging/rt2870/common/spectrum.c b/drivers/staging/rt2870/common/spectrum.c
index 36f1c0e4fbe6..f2e0a8b75033 100644
--- a/drivers/staging/rt2870/common/spectrum.c
+++ b/drivers/staging/rt2870/common/spectrum.c
@@ -1453,10 +1453,8 @@ static VOID PeerChSwAnnAction(
 {
 	CH_SW_ANN_INFO ChSwAnnInfo;
 	PFRAME_802_11 pFr = (PFRAME_802_11)Elem->Msg;
-#ifdef CONFIG_STA_SUPPORT
 	UCHAR index = 0, Channel = 0, NewChannel = 0;
 	ULONG Bssidx = 0;
-#endif // CONFIG_STA_SUPPORT //
 
 	NdisZeroMemory(&ChSwAnnInfo, sizeof(CH_SW_ANN_INFO));
 	if (! PeerChSwAnnSanity(pAd, Elem->Msg, Elem->MsgLen, &ChSwAnnInfo))
@@ -1465,8 +1463,6 @@ static VOID PeerChSwAnnAction(
 		return;
 	}
 
-
-#ifdef CONFIG_STA_SUPPORT
 	if (pAd->OpMode == OPMODE_STA)
 	{
 		Bssidx = BssTableSearch(&pAd->ScanTab, pFr->Hdr.Addr3, pAd->CommonCfg.Channel);
@@ -1513,7 +1509,6 @@ static VOID PeerChSwAnnAction(
 			}
 		}
 	}
-#endif // CONFIG_STA_SUPPORT //
 
 	return;
 }