Staging: add Realtek 8192 PCI wireless driver

This wireless driver should work for the Realtek 8192 PCI devices.

It comes directly from Realtek and has been tested to work on at least
one laptop in the wild.

Cc: Anthony Wong <awong1@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

1 files changed, 692 insertions, 0 deletions

diff --git a/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c
new file mode 100644
index 000000000000..7fcda9ba7964
--- /dev/null
+++ b/drivers/staging/rtl8192e/ieee80211/ieee80211_softmac_wx.c
@@ -0,0 +1,692 @@
+/* IEEE 802.11 SoftMAC layer
+ * Copyright (c) 2005 Andrea Merello <andreamrl@tiscali.it>
+ *
+ * Mostly extracted from the rtl8180-sa2400 driver for the
+ * in-kernel generic ieee802.11 stack.
+ *
+ * Some pieces of code might be stolen from ipw2100 driver
+ * copyright of who own it's copyright ;-)
+ *
+ * PS wx handler mostly stolen from hostap, copyright who
+ * own it's copyright ;-)
+ *
+ * released under the GPL
+ */
+
+
+#include "ieee80211.h"
+#ifdef ENABLE_DOT11D
+#include "dot11d.h"
+#endif
+/* FIXME: add A freqs */
+
+const long ieee80211_wlan_frequencies[] = {
+	2412, 2417, 2422, 2427,
+	2432, 2437, 2442, 2447,
+	2452, 2457, 2462, 2467,
+	2472, 2484
+};
+
+
+int ieee80211_wx_set_freq(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	int ret;
+	struct iw_freq *fwrq = & wrqu->freq;
+
+	down(&ieee->wx_sem);
+
+	if(ieee->iw_mode == IW_MODE_INFRA){
+		ret = -EOPNOTSUPP;
+		goto out;
+	}
+
+	/* if setting by freq convert to channel */
+	if (fwrq->e == 1) {
+		if ((fwrq->m >= (int) 2.412e8 &&
+		     fwrq->m <= (int) 2.487e8)) {
+			int f = fwrq->m / 100000;
+			int c = 0;
+
+			while ((c < 14) && (f != ieee80211_wlan_frequencies[c]))
+				c++;
+
+			/* hack to fall through */
+			fwrq->e = 0;
+			fwrq->m = c + 1;
+		}
+	}
+
+	if (fwrq->e > 0 || fwrq->m > 14 || fwrq->m < 1 ){
+		ret = -EOPNOTSUPP;
+		goto out;
+
+	}else { /* Set the channel */
+
+#ifdef ENABLE_DOT11D
+		if (!(GET_DOT11D_INFO(ieee)->channel_map)[fwrq->m]) {
+			ret = -EINVAL;
+			goto out;
+		}
+#endif
+		ieee->current_network.channel = fwrq->m;
+		ieee->set_chan(ieee->dev, ieee->current_network.channel);
+
+		if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+			if(ieee->state == IEEE80211_LINKED){
+
+			ieee80211_stop_send_beacons(ieee);
+			ieee80211_start_send_beacons(ieee);
+			}
+	}
+
+	ret = 0;
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+
+int ieee80211_wx_get_freq(struct ieee80211_device *ieee,
+			     struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	struct iw_freq *fwrq = & wrqu->freq;
+
+	if (ieee->current_network.channel == 0)
+		return -1;
+	//NM 0.7.0 will not accept channel any more.
+	fwrq->m = ieee80211_wlan_frequencies[ieee->current_network.channel-1] * 100000;
+	fwrq->e = 1;
+//	fwrq->m = ieee->current_network.channel;
+//	fwrq->e = 0;
+
+	return 0;
+}
+
+int ieee80211_wx_get_wap(struct ieee80211_device *ieee,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *extra)
+{
+	unsigned long flags;
+	wrqu->ap_addr.sa_family = ARPHRD_ETHER;
+
+	if (ieee->iw_mode == IW_MODE_MONITOR)
+		return -1;
+
+	/* We want avoid to give to the user inconsistent infos*/
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (ieee->state != IEEE80211_LINKED &&
+		ieee->state != IEEE80211_LINKED_SCANNING &&
+		ieee->wap_set == 0)
+
+		memset(wrqu->ap_addr.sa_data, 0, ETH_ALEN);
+	else
+		memcpy(wrqu->ap_addr.sa_data,
+		       ieee->current_network.bssid, ETH_ALEN);
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	return 0;
+}
+
+
+int ieee80211_wx_set_wap(struct ieee80211_device *ieee,
+			 struct iw_request_info *info,
+			 union iwreq_data *awrq,
+			 char *extra)
+{
+
+	int ret = 0;
+	u8 zero[] = {0,0,0,0,0,0};
+	unsigned long flags;
+
+	short ifup = ieee->proto_started;//dev->flags & IFF_UP;
+	struct sockaddr *temp = (struct sockaddr *)awrq;
+
+	ieee->sync_scan_hurryup = 1;
+
+	down(&ieee->wx_sem);
+	/* use ifconfig hw ether */
+	if (ieee->iw_mode == IW_MODE_MASTER){
+		ret = -1;
+		goto out;
+	}
+
+	if (temp->sa_family != ARPHRD_ETHER){
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (ifup)
+		ieee80211_stop_protocol(ieee);
+
+	/* just to avoid to give inconsistent infos in the
+	 * get wx method. not really needed otherwise
+	 */
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	memcpy(ieee->current_network.bssid, temp->sa_data, ETH_ALEN);
+	ieee->wap_set = memcmp(temp->sa_data, zero,ETH_ALEN)!=0;
+
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	if (ifup)
+		ieee80211_start_protocol(ieee);
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+ int ieee80211_wx_get_essid(struct ieee80211_device *ieee, struct iw_request_info *a,union iwreq_data *wrqu,char *b)
+{
+	int len,ret = 0;
+	unsigned long flags;
+
+	if (ieee->iw_mode == IW_MODE_MONITOR)
+		return -1;
+
+	/* We want avoid to give to the user inconsistent infos*/
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (ieee->current_network.ssid[0] == '\0' ||
+		ieee->current_network.ssid_len == 0){
+		ret = -1;
+		goto out;
+	}
+
+	if (ieee->state != IEEE80211_LINKED &&
+		ieee->state != IEEE80211_LINKED_SCANNING &&
+		ieee->ssid_set == 0){
+		ret = -1;
+		goto out;
+	}
+	len = ieee->current_network.ssid_len;
+	wrqu->essid.length = len;
+	strncpy(b,ieee->current_network.ssid,len);
+	wrqu->essid.flags = 1;
+
+out:
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	return ret;
+
+}
+
+int ieee80211_wx_set_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+
+	u32 target_rate = wrqu->bitrate.value;
+
+	ieee->rate = target_rate/100000;
+	//FIXME: we might want to limit rate also in management protocols.
+	return 0;
+}
+
+
+
+int ieee80211_wx_get_rate(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	u32 tmp_rate;
+#if 0
+	printk("===>mode:%d, halfNmode:%d\n", ieee->mode, ieee->bHalfWirelessN24GMode);
+	if (ieee->mode & (IEEE_A | IEEE_B | IEEE_G))
+		tmp_rate = ieee->rate;
+	else if (ieee->mode & IEEE_N_5G)
+		tmp_rate = 580;
+	else if (ieee->mode & IEEE_N_24G)
+	{
+		if (ieee->GetHalfNmodeSupportByAPsHandler(ieee->dev))
+			tmp_rate = HTHalfMcsToDataRate(ieee, 15);
+		else
+			tmp_rate = HTMcsToDataRate(ieee, 15);
+	}
+#else
+	tmp_rate = TxCountToDataRate(ieee, ieee->softmac_stats.CurrentShowTxate);
+
+#endif
+	wrqu->bitrate.value = tmp_rate * 500000;
+
+	return 0;
+}
+
+
+int ieee80211_wx_set_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	if (wrqu->rts.disabled || !wrqu->rts.fixed)
+		ieee->rts = DEFAULT_RTS_THRESHOLD;
+	else
+	{
+		if (wrqu->rts.value < MIN_RTS_THRESHOLD ||
+				wrqu->rts.value > MAX_RTS_THRESHOLD)
+			return -EINVAL;
+		ieee->rts = wrqu->rts.value;
+	}
+	return 0;
+}
+
+int ieee80211_wx_get_rts(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	wrqu->rts.value = ieee->rts;
+	wrqu->rts.fixed = 0;	/* no auto select */
+	wrqu->rts.disabled = (wrqu->rts.value == DEFAULT_RTS_THRESHOLD);
+	return 0;
+}
+int ieee80211_wx_set_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+
+	ieee->sync_scan_hurryup = 1;
+
+	down(&ieee->wx_sem);
+
+	if (wrqu->mode == ieee->iw_mode)
+		goto out;
+
+	if (wrqu->mode == IW_MODE_MONITOR){
+
+		ieee->dev->type = ARPHRD_IEEE80211;
+	}else{
+		ieee->dev->type = ARPHRD_ETHER;
+	}
+
+	if (!ieee->proto_started){
+		ieee->iw_mode = wrqu->mode;
+	}else{
+		ieee80211_stop_protocol(ieee);
+		ieee->iw_mode = wrqu->mode;
+		ieee80211_start_protocol(ieee);
+	}
+
+out:
+	up(&ieee->wx_sem);
+	return 0;
+}
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
+void ieee80211_wx_sync_scan_wq(struct work_struct *work)
+{
+        struct ieee80211_device *ieee = container_of(work, struct ieee80211_device, wx_sync_scan_wq);
+#else
+void ieee80211_wx_sync_scan_wq(struct ieee80211_device *ieee)
+{
+#endif
+	short chan;
+	HT_EXTCHNL_OFFSET chan_offset=0;
+	HT_CHANNEL_WIDTH bandwidth=0;
+	int b40M = 0;
+	static int count = 0;
+	chan = ieee->current_network.channel;
+	netif_carrier_off(ieee->dev);
+
+	if (ieee->data_hard_stop)
+		ieee->data_hard_stop(ieee->dev);
+
+	ieee80211_stop_send_beacons(ieee);
+
+	ieee->state = IEEE80211_LINKED_SCANNING;
+	ieee->link_change(ieee->dev);
+	ieee->InitialGainHandler(ieee->dev,IG_Backup);
+	if (ieee->pHTInfo->bCurrentHTSupport && ieee->pHTInfo->bEnableHT && ieee->pHTInfo->bCurBW40MHz) {
+		b40M = 1;
+		chan_offset = ieee->pHTInfo->CurSTAExtChnlOffset;
+		bandwidth = (HT_CHANNEL_WIDTH)ieee->pHTInfo->bCurBW40MHz;
+		printk("Scan in 40M, force to 20M first:%d, %d\n", chan_offset, bandwidth);
+		ieee->SetBWModeHandler(ieee->dev, HT_CHANNEL_WIDTH_20, HT_EXTCHNL_OFFSET_NO_EXT);
+		}
+	ieee80211_start_scan_syncro(ieee);
+	if (b40M) {
+		printk("Scan in 20M, back to 40M\n");
+		if (chan_offset == HT_EXTCHNL_OFFSET_UPPER)
+			ieee->set_chan(ieee->dev, chan + 2);
+		else if (chan_offset == HT_EXTCHNL_OFFSET_LOWER)
+			ieee->set_chan(ieee->dev, chan - 2);
+		else
+			ieee->set_chan(ieee->dev, chan);
+		ieee->SetBWModeHandler(ieee->dev, bandwidth, chan_offset);
+	} else {
+		ieee->set_chan(ieee->dev, chan);
+	}
+
+	ieee->InitialGainHandler(ieee->dev,IG_Restore);
+	ieee->state = IEEE80211_LINKED;
+	ieee->link_change(ieee->dev);
+	// To prevent the immediately calling watch_dog after scan.
+	if(ieee->LinkDetectInfo.NumRecvBcnInPeriod==0||ieee->LinkDetectInfo.NumRecvDataInPeriod==0 )
+	{
+		ieee->LinkDetectInfo.NumRecvBcnInPeriod = 1;
+		ieee->LinkDetectInfo.NumRecvDataInPeriod= 1;
+	}
+	if (ieee->data_hard_resume)
+		ieee->data_hard_resume(ieee->dev);
+
+	if(ieee->iw_mode == IW_MODE_ADHOC || ieee->iw_mode == IW_MODE_MASTER)
+		ieee80211_start_send_beacons(ieee);
+
+	netif_carrier_on(ieee->dev);
+	count = 0;
+	up(&ieee->wx_sem);
+
+}
+
+int ieee80211_wx_set_scan(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+	int ret = 0;
+
+	down(&ieee->wx_sem);
+
+	if (ieee->iw_mode == IW_MODE_MONITOR || !(ieee->proto_started)){
+		ret = -1;
+		goto out;
+	}
+
+	if ( ieee->state == IEEE80211_LINKED){
+#if LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0)
+		queue_work(ieee->wq, &ieee->wx_sync_scan_wq);
+#else
+		schedule_task(&ieee->wx_sync_scan_wq);
+#endif
+		/* intentionally forget to up sem */
+		return 0;
+	}
+
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+int ieee80211_wx_set_essid(struct ieee80211_device *ieee,
+			      struct iw_request_info *a,
+			      union iwreq_data *wrqu, char *extra)
+{
+
+	int ret=0,len;
+	short proto_started;
+	unsigned long flags;
+
+	ieee->sync_scan_hurryup = 1;
+	down(&ieee->wx_sem);
+
+	proto_started = ieee->proto_started;
+
+	if (wrqu->essid.length > IW_ESSID_MAX_SIZE){
+		ret= -E2BIG;
+		goto out;
+	}
+
+	if (ieee->iw_mode == IW_MODE_MONITOR){
+		ret= -1;
+		goto out;
+	}
+
+	if(proto_started)
+		ieee80211_stop_protocol(ieee);
+
+
+	/* this is just to be sure that the GET wx callback
+	 * has consisten infos. not needed otherwise
+	 */
+	spin_lock_irqsave(&ieee->lock, flags);
+
+	if (wrqu->essid.flags && wrqu->essid.length) {
+		//first flush current network.ssid
+		len = ((wrqu->essid.length-1) < IW_ESSID_MAX_SIZE) ? (wrqu->essid.length-1) : IW_ESSID_MAX_SIZE;
+#if LINUX_VERSION_CODE <  KERNEL_VERSION(2,6,20)
+		strncpy(ieee->current_network.ssid, extra, len);
+		ieee->current_network.ssid_len = len;
+#if 0
+		{
+			int i;
+			for (i=0; i<len; i++)
+				printk("%c ", extra[i]);
+			printk("\n");
+		}
+#endif
+#else
+		strncpy(ieee->current_network.ssid, extra, len+1);
+		ieee->current_network.ssid_len = len+1;
+#if 0
+		{
+			int i;
+			for (i=0; i<len + 1; i++)
+				printk("%c ", extra[i]);
+			printk("\n");
+		}
+#endif
+#endif
+		ieee->ssid_set = 1;
+	}
+	else{
+		ieee->ssid_set = 0;
+		ieee->current_network.ssid[0] = '\0';
+		ieee->current_network.ssid_len = 0;
+	}
+	spin_unlock_irqrestore(&ieee->lock, flags);
+
+	if (proto_started)
+		ieee80211_start_protocol(ieee);
+out:
+	up(&ieee->wx_sem);
+	return ret;
+}
+
+ int ieee80211_wx_get_mode(struct ieee80211_device *ieee, struct iw_request_info *a,
+			     union iwreq_data *wrqu, char *b)
+{
+
+	wrqu->mode = ieee->iw_mode;
+	return 0;
+}
+
+ int ieee80211_wx_set_rawtx(struct ieee80211_device *ieee,
+			       struct iw_request_info *info,
+			       union iwreq_data *wrqu, char *extra)
+{
+
+	int *parms = (int *)extra;
+	int enable = (parms[0] > 0);
+	short prev = ieee->raw_tx;
+
+	down(&ieee->wx_sem);
+
+	if(enable)
+		ieee->raw_tx = 1;
+	else
+		ieee->raw_tx = 0;
+
+	printk(KERN_INFO"raw TX is %s\n",
+	      ieee->raw_tx ? "enabled" : "disabled");
+
+	if(ieee->iw_mode == IW_MODE_MONITOR)
+	{
+		if(prev == 0 && ieee->raw_tx){
+			if (ieee->data_hard_resume)
+				ieee->data_hard_resume(ieee->dev);
+
+			netif_carrier_on(ieee->dev);
+		}
+
+		if(prev && ieee->raw_tx == 1)
+			netif_carrier_off(ieee->dev);
+	}
+
+	up(&ieee->wx_sem);
+
+	return 0;
+}
+
+int ieee80211_wx_get_name(struct ieee80211_device *ieee,
+			     struct iw_request_info *info,
+			     union iwreq_data *wrqu, char *extra)
+{
+	strcpy(wrqu->name, "802.11");
+	if(ieee->modulation & IEEE80211_CCK_MODULATION){
+		strcat(wrqu->name, "b");
+		if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+			strcat(wrqu->name, "/g");
+	}else if(ieee->modulation & IEEE80211_OFDM_MODULATION)
+		strcat(wrqu->name, "g");
+	if (ieee->mode & (IEEE_N_24G | IEEE_N_5G))
+		strcat(wrqu->name, "/n");
+
+	if((ieee->state == IEEE80211_LINKED) ||
+		(ieee->state == IEEE80211_LINKED_SCANNING))
+		strcat(wrqu->name," linked");
+	else if(ieee->state != IEEE80211_NOLINK)
+		strcat(wrqu->name," link..");
+
+
+	return 0;
+}
+
+
+/* this is mostly stolen from hostap */
+int ieee80211_wx_set_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	int ret = 0;
+#if 1
+	if(
+		(!ieee->sta_wake_up) ||
+	//	(!ieee->ps_request_tx_ack) ||
+		(!ieee->enter_sleep_state) ||
+		(!ieee->ps_is_queue_empty)){
+
+	//	printk("ERROR. PS mode is tryied to be use but driver missed a callback\n\n");
+
+		return -1;
+	}
+#endif
+	down(&ieee->wx_sem);
+
+	if (wrqu->power.disabled){
+		ieee->ps = IEEE80211_PS_DISABLED;
+		goto exit;
+	}
+	if (wrqu->power.flags & IW_POWER_TIMEOUT) {
+		//ieee->ps_period = wrqu->power.value / 1000;
+		ieee->ps_timeout = wrqu->power.value / 1000;
+	}
+
+	if (wrqu->power.flags & IW_POWER_PERIOD) {
+
+		//ieee->ps_timeout = wrqu->power.value / 1000;
+		ieee->ps_period = wrqu->power.value / 1000;
+		//wrq->value / 1024;
+
+	}
+	switch (wrqu->power.flags & IW_POWER_MODE) {
+	case IW_POWER_UNICAST_R:
+		ieee->ps = IEEE80211_PS_UNICAST;
+		break;
+	case IW_POWER_MULTICAST_R:
+		ieee->ps = IEEE80211_PS_MBCAST;
+		break;
+	case IW_POWER_ALL_R:
+		ieee->ps = IEEE80211_PS_UNICAST | IEEE80211_PS_MBCAST;
+		break;
+
+	case IW_POWER_ON:
+	//	ieee->ps = IEEE80211_PS_DISABLED;
+		break;
+
+	default:
+		ret = -EINVAL;
+		goto exit;
+
+	}
+exit:
+	up(&ieee->wx_sem);
+	return ret;
+
+}
+
+/* this is stolen from hostap */
+int ieee80211_wx_get_power(struct ieee80211_device *ieee,
+				 struct iw_request_info *info,
+				 union iwreq_data *wrqu, char *extra)
+{
+	int ret =0;
+
+	down(&ieee->wx_sem);
+
+	if(ieee->ps == IEEE80211_PS_DISABLED){
+		wrqu->power.disabled = 1;
+		goto exit;
+	}
+
+	wrqu->power.disabled = 0;
+
+	if ((wrqu->power.flags & IW_POWER_TYPE) == IW_POWER_TIMEOUT) {
+		wrqu->power.flags = IW_POWER_TIMEOUT;
+		wrqu->power.value = ieee->ps_timeout * 1000;
+	} else {
+//		ret = -EOPNOTSUPP;
+//		goto exit;
+		wrqu->power.flags = IW_POWER_PERIOD;
+		wrqu->power.value = ieee->ps_period * 1000;
+//ieee->current_network.dtim_period * ieee->current_network.beacon_interval * 1024;
+	}
+
+       if ((ieee->ps & (IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST)) == (IEEE80211_PS_MBCAST | IEEE80211_PS_UNICAST))
+	   	wrqu->power.flags |= IW_POWER_ALL_R;
+	else if (ieee->ps & IEEE80211_PS_MBCAST)
+		wrqu->power.flags |= IW_POWER_MULTICAST_R;
+	else
+		wrqu->power.flags |= IW_POWER_UNICAST_R;
+
+exit:
+	up(&ieee->wx_sem);
+	return ret;
+
+}
+#if (LINUX_VERSION_CODE > KERNEL_VERSION(2,5,0))
+//EXPORT_SYMBOL(ieee80211_wx_get_essid);
+//EXPORT_SYMBOL(ieee80211_wx_set_essid);
+//EXPORT_SYMBOL(ieee80211_wx_set_rate);
+//EXPORT_SYMBOL(ieee80211_wx_get_rate);
+//EXPORT_SYMBOL(ieee80211_wx_set_wap);
+//EXPORT_SYMBOL(ieee80211_wx_get_wap);
+//EXPORT_SYMBOL(ieee80211_wx_set_mode);
+//EXPORT_SYMBOL(ieee80211_wx_get_mode);
+//EXPORT_SYMBOL(ieee80211_wx_set_scan);
+//EXPORT_SYMBOL(ieee80211_wx_get_freq);
+//EXPORT_SYMBOL(ieee80211_wx_set_freq);
+//EXPORT_SYMBOL(ieee80211_wx_set_rawtx);
+//EXPORT_SYMBOL(ieee80211_wx_get_name);
+//EXPORT_SYMBOL(ieee80211_wx_set_power);
+//EXPORT_SYMBOL(ieee80211_wx_get_power);
+//EXPORT_SYMBOL(ieee80211_wlan_frequencies);
+//EXPORT_SYMBOL(ieee80211_wx_set_rts);
+//EXPORT_SYMBOL(ieee80211_wx_get_rts);
+#else
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_essid);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_essid);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rate);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rate);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_wap);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_wap);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_mode);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_mode);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_scan);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_freq);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_freq);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rawtx);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_name);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_power);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_power);
+EXPORT_SYMBOL_NOVERS(ieee80211_wlan_frequencies);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_set_rts);
+EXPORT_SYMBOL_NOVERS(ieee80211_wx_get_rts);
+#endif