staging: winbond: remove driver

The driver hasn't been cleaned up and nobody is working to do so, so
remove it.

Signed-off-by: Kristina Martšenko <kristina.martsenko@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

1 files changed, 0 insertions, 134 deletions

diff --git a/drivers/staging/winbond/mto.h b/drivers/staging/winbond/mto.h
deleted file mode 100644
index 8d41eeda45bf..000000000000
--- a/drivers/staging/winbond/mto.h
+++ /dev/null
@@ -1,134 +0,0 @@
-/*
- * ==================================================================
- * MTO.H
- *
- * Copyright (c) 2003 Winbond Electronics Corp. All rights reserved.
- * ==================================================================
- */
-#ifndef __MTO_H__
-#define __MTO_H__
-
-#include <linux/types.h>
-
-struct wbsoft_priv;
-
-#define MTO_PREAMBLE_LONG               WLAN_PREAMBLE_TYPE_LONG
-#define MTO_PREAMBLE_SHORT              WLAN_PREAMBLE_TYPE_SHORT
-
-/* Defines the parameters used in the MAC Throughput Optimization algorithm */
-struct wb35_mto_params {
-	u32	TxFlowCount; /* to judge what kind the tx flow(sparse or busy) is */
-
-	/* --------- DTO threshold parameters ------------- */
-	u16	DTO_PeriodicCheckCycle;
-	u16	DTO_RssiThForAntDiv;
-
-	u16	DTO_TxCountThForCalcNewRate;
-	u16	DTO_TxRateIncTh;
-
-	u16	DTO_TxRateDecTh;
-	u16	DTO_TxRateEqTh;
-
-	u16	DTO_TxRateBackOff;
-	u16	DTO_TxRetryRateReduce;
-
-	u16	DTO_TxPowerIndex;		/* 0 ~ 31 */
-	u16	reserved_1;
-	/* ------------------------------------------------ */
-
-	u8	PowerChangeEnable;
-	u8	AntDiversityEnable;
-	u8	CCA_Mode;
-	u8	CCA_Mode_Setup;
-	u8	Preamble_Type;
-	u8	PreambleChangeEnable;
-
-	u8	DataRateLevel;
-	u8	DataRateChangeEnable;
-	u8	FragThresholdLevel;
-	u8	FragThresholdChangeEnable;
-
-	u16	RTSThreshold;
-	u16	RTSThreshold_Setup;
-
-	u32	AvgIdleSlot;
-	u32	Pr_Interf;
-	u32	AvgGapBtwnInterf;
-
-	u8	RTSChangeEnable;
-	u8	Ant_sel;
-	u8	aging_timeout;
-	u8	reserved_2;
-
-	u32	Cnt_Ant[2];
-	u32	SQ_Ant[2];
-
-	u8	FallbackRateLevel;
-	u8	OfdmRateLevel;
-
-	u8	RatePolicy;
-	u8	reserved_3[3];
-
-	/* For RSSI turning */
-	s32	RSSI_high;
-	s32	RSSI_low;
-};
-
-
-#define MTO_DATA()		(adapter->sMtoPara)
-#define MTO_HAL()		(&adapter->sHwData)
-#define MTO_SET_PREAMBLE_TYPE(x) /* Turbo mark LM_PREAMBLE_TYPE(&pcore_data->lm_data) = (x) */
-#define MTO_ENABLE		(adapter->sLocalPara.TxRateMode == RATE_AUTO)
-#define MTO_TXPOWER_FROM_EEPROM	(adapter->sHwData.PowerIndexFromEEPROM)
-#define LOCAL_ANTENNA_NO()	(adapter->sLocalPara.bAntennaNo)
-#define LOCAL_IS_CONNECTED()	(adapter->sLocalPara.wConnectedSTAindex != 0)
-#define MTO_INITTXRATE_MODE	(adapter->sHwData.SoftwareSet&0x2) /* bit 1 */
-
-#define MTO_POWER_CHANGE_ENABLE()	MTO_DATA().PowerChangeEnable
-#define MTO_CCA_MODE()			MTO_DATA().CCA_Mode
-#define MTO_CCA_MODE_SETUP()		MTO_DATA().CCA_Mode_Setup
-#define MTO_PREAMBLE_TYPE()		MTO_DATA().Preamble_Type
-#define MTO_PREAMBLE_CHANGE_ENABLE()	MTO_DATA().PreambleChangeEnable
-
-#define MTO_RATE_LEVEL()		MTO_DATA().DataRateLevel
-#define MTO_OFDM_RATE_LEVEL()		MTO_DATA().OfdmRateLevel
-#define MTO_RATE_CHANGE_ENABLE()	MTO_DATA().DataRateChangeEnable
-#define MTO_FRAG_TH_LEVEL()		MTO_DATA().FragThresholdLevel
-#define MTO_FRAG_CHANGE_ENABLE()	MTO_DATA().FragThresholdChangeEnable
-#define MTO_RTS_THRESHOLD()		MTO_DATA().RTSThreshold
-#define MTO_RTS_CHANGE_ENABLE()		MTO_DATA().RTSChangeEnable
-#define MTO_RTS_THRESHOLD_SETUP()	MTO_DATA().RTSThreshold_Setup
-
-#define MTO_AVG_IDLE_SLOT()		MTO_DATA().AvgIdleSlot
-#define MTO_PR_INTERF()			MTO_DATA().Pr_Interf
-#define MTO_AVG_GAP_BTWN_INTERF()	MTO_DATA().AvgGapBtwnInterf
-
-#define MTO_CNT_ANT(x)			MTO_DATA().Cnt_Ant[(x)]
-#define MTO_SQ_ANT(x)			MTO_DATA().SQ_Ant[(x)]
-#define MTO_AGING_TIMEOUT()		MTO_DATA().aging_timeout
-
-#define MTO_TXFLOWCOUNT()		MTO_DATA().TxFlowCount
-
-/* --------- DTO threshold parameters ------------- */
-#define	MTOPARA_PERIODIC_CHECK_CYCLE()		MTO_DATA().DTO_PeriodicCheckCycle
-#define	MTOPARA_RSSI_TH_FOR_ANTDIV()		MTO_DATA().DTO_RssiThForAntDiv
-#define	MTOPARA_TXCOUNT_TH_FOR_CALC_RATE()	MTO_DATA().DTO_TxCountThForCalcNewRate
-#define	MTOPARA_TXRATE_INC_TH()			MTO_DATA().DTO_TxRateIncTh
-#define	MTOPARA_TXRATE_DEC_TH()			MTO_DATA().DTO_TxRateDecTh
-#define MTOPARA_TXRATE_EQ_TH()			MTO_DATA().DTO_TxRateEqTh
-#define	MTOPARA_TXRATE_BACKOFF()		MTO_DATA().DTO_TxRateBackOff
-#define	MTOPARA_TXRETRYRATE_REDUCE()		MTO_DATA().DTO_TxRetryRateReduce
-#define MTOPARA_TXPOWER_INDEX()			MTO_DATA().DTO_TxPowerIndex
-/* ------------------------------------------------ */
-
-
-extern u16 MTO_Frag_Th_Tbl[];
-
-#define MTO_DATA_RATE()			MTO_Data_Rate_Tbl[MTO_RATE_LEVEL()]
-#define MTO_FRAG_TH()			MTO_Frag_Th_Tbl[MTO_FRAG_TH_LEVEL()]
-
-void MTO_Init(struct wbsoft_priv *);
-void MTO_SetTxCount(struct wbsoft_priv *adapter, u8 t0, u8 index);
-
-#endif /* __MTO_H__ */
-