Merge remote-tracking branch 'tty/tty-next'

6 files changed, 26 insertions, 7 deletions

diff --git a/drivers/tty/serial/8250/8250_dw.c b/drivers/tty/serial/8250/8250_dw.c
index 5bb0c42c88dd..bda75d317d24 100644
--- a/drivers/tty/serial/8250/8250_dw.c
+++ b/drivers/tty/serial/8250/8250_dw.c
@@ -515,7 +515,8 @@ static int dw8250_probe(struct platform_device *pdev)
 	/* If no clock rate is defined, fail. */
 	if (!p->uartclk) {
 		dev_err(dev, "clock rate not defined\n");
-		return -EINVAL;
+		err = -EINVAL;
+		goto err_clk;
 	}
 
 	data->pclk = devm_clk_get(dev, "apb_pclk");
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index 6af84900870e..15a8c8dfa92b 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -91,14 +91,22 @@ static int __init ingenic_early_console_setup(struct earlycon_device *dev,
 					      const char *opt)
 {
 	struct uart_port *port = &dev->port;
-	unsigned int baud, divisor;
+	unsigned int divisor;
+	int baud = 115200;
 
 	if (!dev->port.membase)
 		return -ENODEV;
 
+	if (opt) {
+		unsigned int parity, bits, flow; /* unused for now */
+
+		uart_parse_options(opt, &baud, &parity, &bits, &flow);
+	}
+
 	ingenic_early_console_setup_clock(dev);
 
-	baud = dev->baud ?: 115200;
+	if (dev->baud)
+		baud = dev->baud;
 	divisor = DIV_ROUND_CLOSEST(port->uartclk, 16 * baud);
 
 	early_out(port, UART_IER, 0);
@@ -125,6 +133,10 @@ EARLYCON_DECLARE(jz4740_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4740_uart, "ingenic,jz4740-uart",
 		    ingenic_early_console_setup);
 
+EARLYCON_DECLARE(jz4770_uart, ingenic_early_console_setup);
+OF_EARLYCON_DECLARE(jz4770_uart, "ingenic,jz4770-uart",
+		    ingenic_early_console_setup);
+
 EARLYCON_DECLARE(jz4775_uart, ingenic_early_console_setup);
 OF_EARLYCON_DECLARE(jz4775_uart, "ingenic,jz4775-uart",
 		    ingenic_early_console_setup);
@@ -319,6 +331,7 @@ static const struct ingenic_uart_config jz4780_uart_config = {
 static const struct of_device_id of_match[] = {
 	{ .compatible = "ingenic,jz4740-uart", .data = &jz4740_uart_config },
 	{ .compatible = "ingenic,jz4760-uart", .data = &jz4760_uart_config },
+	{ .compatible = "ingenic,jz4770-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4775-uart", .data = &jz4760_uart_config },
 	{ .compatible = "ingenic,jz4780-uart", .data = &jz4780_uart_config },
 	{ /* sentinel */ }
diff --git a/drivers/tty/serial/8250/8250_of.c b/drivers/tty/serial/8250/8250_of.c
index 1e67a7e4a5fd..160b8906d9b9 100644
--- a/drivers/tty/serial/8250/8250_of.c
+++ b/drivers/tty/serial/8250/8250_of.c
@@ -136,8 +136,11 @@ static int of_platform_serial_setup(struct platform_device *ofdev,
 	}
 
 	info->rst = devm_reset_control_get_optional_shared(&ofdev->dev, NULL);
-	if (IS_ERR(info->rst))
+	if (IS_ERR(info->rst)) {
+		ret = PTR_ERR(info->rst);
 		goto err_dispose;
+	}
+
 	ret = reset_control_deassert(info->rst);
 	if (ret)
 		goto err_dispose;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index bd40ba402410..57f6eba47f44 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -414,7 +414,7 @@ static void omap_8250_set_termios(struct uart_port *port,
 	/* Up to here it was mostly serial8250_do_set_termios() */
 
 	/*
-	 * We enable TRIG_GRANU for RX and TX and additionaly we set
+	 * We enable TRIG_GRANU for RX and TX and additionally we set
 	 * SCR_TX_EMPTY bit. The result is the following:
 	 * - RX_TRIGGER amount of bytes in the FIFO will cause an interrupt.
 	 * - less than RX_TRIGGER number of bytes will also cause an interrupt
diff --git a/drivers/tty/serial/8250/8250_uniphier.c b/drivers/tty/serial/8250/8250_uniphier.c
index 45ef506293ae..28d88ccf5a0c 100644
--- a/drivers/tty/serial/8250/8250_uniphier.c
+++ b/drivers/tty/serial/8250/8250_uniphier.c
@@ -250,12 +250,13 @@ static int uniphier_uart_probe(struct platform_device *pdev)
 	up.dl_read = uniphier_serial_dl_read;
 	up.dl_write = uniphier_serial_dl_write;
 
-	priv->line = serial8250_register_8250_port(&up);
-	if (priv->line < 0) {
+	ret = serial8250_register_8250_port(&up);
+	if (ret < 0) {
 		dev_err(dev, "failed to register 8250 port\n");
 		clk_disable_unprepare(priv->clk);
 		return ret;
 	}
+	priv->line = ret;
 
 	platform_set_drvdata(pdev, priv);
 
diff --git a/drivers/tty/serial/8250/Kconfig b/drivers/tty/serial/8250/Kconfig
index a5c0ef1e7695..16b1496e6105 100644
--- a/drivers/tty/serial/8250/Kconfig
+++ b/drivers/tty/serial/8250/Kconfig
@@ -5,6 +5,7 @@
 
 config SERIAL_8250
 	tristate "8250/16550 and compatible serial support"
+	depends on !S390
 	select SERIAL_CORE
 	---help---
 	  This selects whether you want to include the driver for the standard