summaryrefslogtreecommitdiff
path: root/drivers/tty
diff options
context:
space:
mode:
authorArnd Bergmann <arnd@arndb.de>2021-01-20 17:12:26 +0100
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2021-01-20 18:49:01 +0100
commit4776a4a0a29c64b954a445ff65848bd376a50fcc (patch)
treeeffc80ea866eb8f2f9d28fac01a6937ed116d397 /drivers/tty
parent532b7cecdd4bee0e50c704b1281194c88f19cef1 (diff)
serial: remove sirf prima/atlas driver
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20210120161324.3728294-1-arnd@kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'drivers/tty')
-rw-r--r--drivers/tty/serial/Kconfig22
-rw-r--r--drivers/tty/serial/Makefile1
-rw-r--r--drivers/tty/serial/sirfsoc_uart.c1503
-rw-r--r--drivers/tty/serial/sirfsoc_uart.h447
4 files changed, 0 insertions, 1973 deletions
diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
index 83f6ca4bf210..22e86ba4f827 100644
--- a/drivers/tty/serial/Kconfig
+++ b/drivers/tty/serial/Kconfig
@@ -276,28 +276,6 @@ config SERIAL_SAMSUNG_CONSOLE
your boot loader about how to pass options to the kernel at
boot time.)
-config SERIAL_SIRFSOC
- tristate "SiRF SoC Platform Serial port support"
- depends on ARCH_SIRF
- select SERIAL_CORE
- help
- Support for the on-chip UART on the CSR SiRFprimaII series,
- providing /dev/ttySiRF0, 1 and 2 (note, some machines may not
- provide all of these ports, depending on how the serial port
- pins are configured).
-
-config SERIAL_SIRFSOC_CONSOLE
- bool "Support for console on SiRF SoC serial port"
- depends on SERIAL_SIRFSOC=y
- select SERIAL_CORE_CONSOLE
- help
- Even if you say Y here, the currently visible virtual console
- (/dev/tty0) will still be used as the system console by default, but
- you can alter that using a kernel command line option such as
- "console=ttySiRFx". (Try "man bootparam" or see the documentation of
- your boot loader about how to pass options to the kernel at
- boot time.)
-
config SERIAL_TEGRA
tristate "NVIDIA Tegra20/30 SoC serial controller"
depends on ARCH_TEGRA && TEGRA20_APB_DMA
diff --git a/drivers/tty/serial/Makefile b/drivers/tty/serial/Makefile
index ec2b74091f0c..931dc1d6885e 100644
--- a/drivers/tty/serial/Makefile
+++ b/drivers/tty/serial/Makefile
@@ -69,7 +69,6 @@ obj-$(CONFIG_SERIAL_PCH_UART) += pch_uart.o
obj-$(CONFIG_SERIAL_MXS_AUART) += mxs-auart.o
obj-$(CONFIG_SERIAL_LANTIQ) += lantiq.o
obj-$(CONFIG_SERIAL_XILINX_PS_UART) += xilinx_uartps.o
-obj-$(CONFIG_SERIAL_SIRFSOC) += sirfsoc_uart.o
obj-$(CONFIG_SERIAL_TEGRA) += serial-tegra.o
obj-$(CONFIG_SERIAL_TEGRA_TCU) += tegra-tcu.o
obj-$(CONFIG_SERIAL_AR933X) += ar933x_uart.o
diff --git a/drivers/tty/serial/sirfsoc_uart.c b/drivers/tty/serial/sirfsoc_uart.c
deleted file mode 100644
index 38622f2a30a9..000000000000
--- a/drivers/tty/serial/sirfsoc_uart.c
+++ /dev/null
@@ -1,1503 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Driver for CSR SiRFprimaII onboard UARTs.
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-
-#include <linux/module.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/sysrq.h>
-#include <linux/console.h>
-#include <linux/tty.h>
-#include <linux/tty_flip.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/clk.h>
-#include <linux/of.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/of_gpio.h>
-#include <linux/dmaengine.h>
-#include <linux/dma-direction.h>
-#include <linux/dma-mapping.h>
-#include <asm/irq.h>
-#include <asm/mach/irq.h>
-
-#include "sirfsoc_uart.h"
-
-static unsigned int
-sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count);
-static unsigned int
-sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count);
-static struct uart_driver sirfsoc_uart_drv;
-
-static void sirfsoc_uart_tx_dma_complete_callback(void *param);
-static const struct sirfsoc_baudrate_to_regv baudrate_to_regv[] = {
- {4000000, 2359296},
- {3500000, 1310721},
- {3000000, 1572865},
- {2500000, 1245186},
- {2000000, 1572866},
- {1500000, 1245188},
- {1152000, 1638404},
- {1000000, 1572869},
- {921600, 1114120},
- {576000, 1245196},
- {500000, 1245198},
- {460800, 1572876},
- {230400, 1310750},
- {115200, 1310781},
- {57600, 1310843},
- {38400, 1114328},
- {19200, 1114545},
- {9600, 1114979},
-};
-
-static struct sirfsoc_uart_port *sirf_ports[SIRFSOC_UART_NR];
-
-static inline struct sirfsoc_uart_port *to_sirfport(struct uart_port *port)
-{
- return container_of(port, struct sirfsoc_uart_port, port);
-}
-
-static inline unsigned int sirfsoc_uart_tx_empty(struct uart_port *port)
-{
- unsigned long reg;
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- reg = rd_regl(port, ureg->sirfsoc_tx_fifo_status);
- return (reg & ufifo_st->ff_empty(port)) ? TIOCSER_TEMT : 0;
-}
-
-static unsigned int sirfsoc_uart_get_mctrl(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
- goto cts_asserted;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- if (!(rd_regl(port, ureg->sirfsoc_afc_ctrl) &
- SIRFUART_AFC_CTS_STATUS))
- goto cts_asserted;
- else
- goto cts_deasserted;
- } else {
- if (!gpio_get_value(sirfport->cts_gpio))
- goto cts_asserted;
- else
- goto cts_deasserted;
- }
-cts_deasserted:
- return TIOCM_CAR | TIOCM_DSR;
-cts_asserted:
- return TIOCM_CAR | TIOCM_DSR | TIOCM_CTS;
-}
-
-static void sirfsoc_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- unsigned int assert = mctrl & TIOCM_RTS;
- unsigned int val = assert ? SIRFUART_AFC_CTRL_RX_THD : 0x0;
- unsigned int current_val;
-
- if (mctrl & TIOCM_LOOP) {
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
- wr_regl(port, ureg->sirfsoc_line_ctrl,
- rd_regl(port, ureg->sirfsoc_line_ctrl) |
- SIRFUART_LOOP_BACK);
- else
- wr_regl(port, ureg->sirfsoc_mode1,
- rd_regl(port, ureg->sirfsoc_mode1) |
- SIRFSOC_USP_LOOP_BACK_CTRL);
- } else {
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART)
- wr_regl(port, ureg->sirfsoc_line_ctrl,
- rd_regl(port, ureg->sirfsoc_line_ctrl) &
- ~SIRFUART_LOOP_BACK);
- else
- wr_regl(port, ureg->sirfsoc_mode1,
- rd_regl(port, ureg->sirfsoc_mode1) &
- ~SIRFSOC_USP_LOOP_BACK_CTRL);
- }
-
- if (!sirfport->hw_flow_ctrl || !sirfport->ms_enabled)
- return;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- current_val = rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0xFF;
- val |= current_val;
- wr_regl(port, ureg->sirfsoc_afc_ctrl, val);
- } else {
- if (!val)
- gpio_set_value(sirfport->rts_gpio, 1);
- else
- gpio_set_value(sirfport->rts_gpio, 0);
- }
-}
-
-static void sirfsoc_uart_stop_tx(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-
- if (sirfport->tx_dma_chan) {
- if (sirfport->tx_dma_state == TX_DMA_RUNNING) {
- dmaengine_pause(sirfport->tx_dma_chan);
- sirfport->tx_dma_state = TX_DMA_PAUSE;
- } else {
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~uint_en->sirfsoc_txfifo_empty_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_txfifo_empty_en);
- }
- } else {
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
- wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
- ureg->sirfsoc_tx_rx_en) & ~SIRFUART_TX_EN);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~uint_en->sirfsoc_txfifo_empty_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_txfifo_empty_en);
- }
-}
-
-static void sirfsoc_uart_tx_with_dma(struct sirfsoc_uart_port *sirfport)
-{
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long tran_size;
- unsigned long tran_start;
- unsigned long pio_tx_size;
-
- tran_size = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
- tran_start = (unsigned long)(xmit->buf + xmit->tail);
- if (uart_circ_empty(xmit) || uart_tx_stopped(port) ||
- !tran_size)
- return;
- if (sirfport->tx_dma_state == TX_DMA_PAUSE) {
- dmaengine_resume(sirfport->tx_dma_chan);
- return;
- }
- if (sirfport->tx_dma_state == TX_DMA_RUNNING)
- return;
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)&
- ~(uint_en->sirfsoc_txfifo_empty_en));
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_txfifo_empty_en);
- /*
- * DMA requires buffer address and buffer length are both aligned with
- * 4 bytes, so we use PIO for
- * 1. if address is not aligned with 4bytes, use PIO for the first 1~3
- * bytes, and move to DMA for the left part aligned with 4bytes
- * 2. if buffer length is not aligned with 4bytes, use DMA for aligned
- * part first, move to PIO for the left 1~3 bytes
- */
- if (tran_size < 4 || BYTES_TO_ALIGN(tran_start)) {
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
- wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)|
- SIRFUART_IO_MODE);
- if (BYTES_TO_ALIGN(tran_start)) {
- pio_tx_size = sirfsoc_uart_pio_tx_chars(sirfport,
- BYTES_TO_ALIGN(tran_start));
- tran_size -= pio_tx_size;
- }
- if (tran_size < 4)
- sirfsoc_uart_pio_tx_chars(sirfport, tran_size);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)|
- uint_en->sirfsoc_txfifo_empty_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_txfifo_empty_en);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
- } else {
- /* tx transfer mode switch into dma mode */
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
- wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl)&
- ~SIRFUART_IO_MODE);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
- tran_size &= ~(0x3);
-
- sirfport->tx_dma_addr = dma_map_single(port->dev,
- xmit->buf + xmit->tail,
- tran_size, DMA_TO_DEVICE);
- sirfport->tx_dma_desc = dmaengine_prep_slave_single(
- sirfport->tx_dma_chan, sirfport->tx_dma_addr,
- tran_size, DMA_MEM_TO_DEV, DMA_PREP_INTERRUPT);
- if (!sirfport->tx_dma_desc) {
- dev_err(port->dev, "DMA prep slave single fail\n");
- return;
- }
- sirfport->tx_dma_desc->callback =
- sirfsoc_uart_tx_dma_complete_callback;
- sirfport->tx_dma_desc->callback_param = (void *)sirfport;
- sirfport->transfer_size = tran_size;
-
- dmaengine_submit(sirfport->tx_dma_desc);
- dma_async_issue_pending(sirfport->tx_dma_chan);
- sirfport->tx_dma_state = TX_DMA_RUNNING;
- }
-}
-
-static void sirfsoc_uart_start_tx(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- if (sirfport->tx_dma_chan)
- sirfsoc_uart_tx_with_dma(sirfport);
- else {
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
- wr_regl(port, ureg->sirfsoc_tx_rx_en, rd_regl(port,
- ureg->sirfsoc_tx_rx_en) | SIRFUART_TX_EN);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_STOP);
- sirfsoc_uart_pio_tx_chars(sirfport, port->fifosize);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_START);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)|
- uint_en->sirfsoc_txfifo_empty_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_txfifo_empty_en);
- }
-}
-
-static void sirfsoc_uart_stop_rx(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- if (sirfport->rx_dma_chan) {
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) &
- ~(SIRFUART_RX_DMA_INT_EN(uint_en,
- sirfport->uart_reg->uart_type) |
- uint_en->sirfsoc_rx_done_en));
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- SIRFUART_RX_DMA_INT_EN(uint_en,
- sirfport->uart_reg->uart_type)|
- uint_en->sirfsoc_rx_done_en);
- dmaengine_terminate_all(sirfport->rx_dma_chan);
- } else {
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)&
- ~(SIRFUART_RX_IO_INT_EN(uint_en,
- sirfport->uart_reg->uart_type)));
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- SIRFUART_RX_IO_INT_EN(uint_en,
- sirfport->uart_reg->uart_type));
- }
-}
-
-static void sirfsoc_uart_disable_ms(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-
- if (!sirfport->hw_flow_ctrl)
- return;
- sirfport->ms_enabled = false;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- wr_regl(port, ureg->sirfsoc_afc_ctrl,
- rd_regl(port, ureg->sirfsoc_afc_ctrl) & ~0x3FF);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)&
- ~uint_en->sirfsoc_cts_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_cts_en);
- } else
- disable_irq(gpio_to_irq(sirfport->cts_gpio));
-}
-
-static irqreturn_t sirfsoc_uart_usp_cts_handler(int irq, void *dev_id)
-{
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
- struct uart_port *port = &sirfport->port;
- spin_lock(&port->lock);
- if (gpio_is_valid(sirfport->cts_gpio) && sirfport->ms_enabled)
- uart_handle_cts_change(port,
- !gpio_get_value(sirfport->cts_gpio));
- spin_unlock(&port->lock);
- return IRQ_HANDLED;
-}
-
-static void sirfsoc_uart_enable_ms(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
-
- if (!sirfport->hw_flow_ctrl)
- return;
- sirfport->ms_enabled = true;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- wr_regl(port, ureg->sirfsoc_afc_ctrl,
- rd_regl(port, ureg->sirfsoc_afc_ctrl) |
- SIRFUART_AFC_TX_EN | SIRFUART_AFC_RX_EN |
- SIRFUART_AFC_CTRL_RX_THD);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)
- | uint_en->sirfsoc_cts_en);
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_cts_en);
- } else
- enable_irq(gpio_to_irq(sirfport->cts_gpio));
-}
-
-static void sirfsoc_uart_break_ctl(struct uart_port *port, int break_state)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- unsigned long ulcon = rd_regl(port, ureg->sirfsoc_line_ctrl);
- if (break_state)
- ulcon |= SIRFUART_SET_BREAK;
- else
- ulcon &= ~SIRFUART_SET_BREAK;
- wr_regl(port, ureg->sirfsoc_line_ctrl, ulcon);
- }
-}
-
-static unsigned int
-sirfsoc_uart_pio_rx_chars(struct uart_port *port, unsigned int max_rx_count)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- unsigned int ch, rx_count = 0;
- struct tty_struct *tty;
- tty = tty_port_tty_get(&port->state->port);
- if (!tty)
- return -ENODEV;
- while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
- ufifo_st->ff_empty(port))) {
- ch = rd_regl(port, ureg->sirfsoc_rx_fifo_data) |
- SIRFUART_DUMMY_READ;
- if (unlikely(uart_handle_sysrq_char(port, ch)))
- continue;
- uart_insert_char(port, 0, 0, ch, TTY_NORMAL);
- rx_count++;
- if (rx_count >= max_rx_count)
- break;
- }
-
- port->icount.rx += rx_count;
-
- return rx_count;
-}
-
-static unsigned int
-sirfsoc_uart_pio_tx_chars(struct sirfsoc_uart_port *sirfport, int count)
-{
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned int num_tx = 0;
- while (!uart_circ_empty(xmit) &&
- !(rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
- ufifo_st->ff_full(port)) &&
- count--) {
- wr_regl(port, ureg->sirfsoc_tx_fifo_data,
- xmit->buf[xmit->tail]);
- xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
- port->icount.tx++;
- num_tx++;
- }
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- return num_tx;
-}
-
-static void sirfsoc_uart_tx_dma_complete_callback(void *param)
-{
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)param;
- struct uart_port *port = &sirfport->port;
- struct circ_buf *xmit = &port->state->xmit;
- unsigned long flags;
-
- spin_lock_irqsave(&port->lock, flags);
- xmit->tail = (xmit->tail + sirfport->transfer_size) &
- (UART_XMIT_SIZE - 1);
- port->icount.tx += sirfport->transfer_size;
- if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
- uart_write_wakeup(port);
- if (sirfport->tx_dma_addr)
- dma_unmap_single(port->dev, sirfport->tx_dma_addr,
- sirfport->transfer_size, DMA_TO_DEVICE);
- sirfport->tx_dma_state = TX_DMA_IDLE;
- sirfsoc_uart_tx_with_dma(sirfport);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static irqreturn_t sirfsoc_uart_isr(int irq, void *dev_id)
-{
- unsigned long intr_status;
- unsigned long cts_status;
- unsigned long flag = TTY_NORMAL;
- struct sirfsoc_uart_port *sirfport = (struct sirfsoc_uart_port *)dev_id;
- struct uart_port *port = &sirfport->port;
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- struct sirfsoc_int_status *uint_st = &sirfport->uart_reg->uart_int_st;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- struct uart_state *state = port->state;
- struct circ_buf *xmit = &port->state->xmit;
- spin_lock(&port->lock);
- intr_status = rd_regl(port, ureg->sirfsoc_int_st_reg);
- wr_regl(port, ureg->sirfsoc_int_st_reg, intr_status);
- intr_status &= rd_regl(port, ureg->sirfsoc_int_en_reg);
- if (unlikely(intr_status & (SIRFUART_ERR_INT_STAT(uint_st,
- sirfport->uart_reg->uart_type)))) {
- if (intr_status & uint_st->sirfsoc_rxd_brk) {
- port->icount.brk++;
- if (uart_handle_break(port))
- goto recv_char;
- }
- if (intr_status & uint_st->sirfsoc_rx_oflow) {
- port->icount.overrun++;
- flag = TTY_OVERRUN;
- }
- if (intr_status & uint_st->sirfsoc_frm_err) {
- port->icount.frame++;
- flag = TTY_FRAME;
- }
- if (intr_status & uint_st->sirfsoc_parity_err) {
- port->icount.parity++;
- flag = TTY_PARITY;
- }
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
- intr_status &= port->read_status_mask;
- uart_insert_char(port, intr_status,
- uint_en->sirfsoc_rx_oflow_en, 0, flag);
- }
-recv_char:
- if ((sirfport->uart_reg->uart_type == SIRF_REAL_UART) &&
- (intr_status & SIRFUART_CTS_INT_ST(uint_st)) &&
- !sirfport->tx_dma_state) {
- cts_status = rd_regl(port, ureg->sirfsoc_afc_ctrl) &
- SIRFUART_AFC_CTS_STATUS;
- if (cts_status != 0)
- cts_status = 0;
- else
- cts_status = 1;
- uart_handle_cts_change(port, cts_status);
- wake_up_interruptible(&state->port.delta_msr_wait);
- }
- if (!sirfport->rx_dma_chan &&
- (intr_status & SIRFUART_RX_IO_INT_ST(uint_st))) {
- /*
- * chip will trigger continuous RX_TIMEOUT interrupt
- * in RXFIFO empty and not trigger if RXFIFO recevice
- * data in limit time, original method use RX_TIMEOUT
- * will trigger lots of useless interrupt in RXFIFO
- * empty.RXFIFO received one byte will trigger RX_DONE
- * interrupt.use RX_DONE to wait for data received
- * into RXFIFO, use RX_THD/RX_FULL for lots data receive
- * and use RX_TIMEOUT for the last left data.
- */
- if (intr_status & uint_st->sirfsoc_rx_done) {
- if (!sirfport->is_atlas7) {
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)
- & ~(uint_en->sirfsoc_rx_done_en));
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)
- | (uint_en->sirfsoc_rx_timeout_en));
- } else {
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_rx_done_en);
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_rx_timeout_en);
- }
- } else {
- if (intr_status & uint_st->sirfsoc_rx_timeout) {
- if (!sirfport->is_atlas7) {
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)
- & ~(uint_en->sirfsoc_rx_timeout_en));
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg)
- | (uint_en->sirfsoc_rx_done_en));
- } else {
- wr_regl(port,
- ureg->sirfsoc_int_en_clr_reg,
- uint_en->sirfsoc_rx_timeout_en);
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- uint_en->sirfsoc_rx_done_en);
- }
- }
- sirfsoc_uart_pio_rx_chars(port, port->fifosize);
- }
- }
- spin_unlock(&port->lock);
- tty_flip_buffer_push(&state->port);
- spin_lock(&port->lock);
- if (intr_status & uint_st->sirfsoc_txfifo_empty) {
- if (sirfport->tx_dma_chan)
- sirfsoc_uart_tx_with_dma(sirfport);
- else {
- if (uart_circ_empty(xmit) || uart_tx_stopped(port)) {
- spin_unlock(&port->lock);
- return IRQ_HANDLED;
- } else {
- sirfsoc_uart_pio_tx_chars(sirfport,
- port->fifosize);
- if ((uart_circ_empty(xmit)) &&
- (rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
- ufifo_st->ff_empty(port)))
- sirfsoc_uart_stop_tx(port);
- }
- }
- }
- spin_unlock(&port->lock);
-
- return IRQ_HANDLED;
-}
-
-static void sirfsoc_uart_rx_dma_complete_callback(void *param)
-{
-}
-
-/* submit rx dma task into dmaengine */
-static void sirfsoc_uart_start_next_rx_dma(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
- ~SIRFUART_IO_MODE);
- sirfport->rx_dma_items.xmit.tail =
- sirfport->rx_dma_items.xmit.head = 0;
- sirfport->rx_dma_items.desc =
- dmaengine_prep_dma_cyclic(sirfport->rx_dma_chan,
- sirfport->rx_dma_items.dma_addr, SIRFSOC_RX_DMA_BUF_SIZE,
- SIRFSOC_RX_DMA_BUF_SIZE / 2,
- DMA_DEV_TO_MEM, DMA_PREP_INTERRUPT);
- if (IS_ERR_OR_NULL(sirfport->rx_dma_items.desc)) {
- dev_err(port->dev, "DMA slave single fail\n");
- return;
- }
- sirfport->rx_dma_items.desc->callback =
- sirfsoc_uart_rx_dma_complete_callback;
- sirfport->rx_dma_items.desc->callback_param = sirfport;
- sirfport->rx_dma_items.cookie =
- dmaengine_submit(sirfport->rx_dma_items.desc);
- dma_async_issue_pending(sirfport->rx_dma_chan);
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) |
- SIRFUART_RX_DMA_INT_EN(uint_en,
- sirfport->uart_reg->uart_type));
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- SIRFUART_RX_DMA_INT_EN(uint_en,
- sirfport->uart_reg->uart_type));
-}
-
-static unsigned int
-sirfsoc_usp_calc_sample_div(unsigned long set_rate,
- unsigned long ioclk_rate, unsigned long *sample_reg)
-{
- unsigned long min_delta = ~0UL;
- unsigned short sample_div;
- unsigned long ioclk_div = 0;
- unsigned long temp_delta;
-
- for (sample_div = SIRF_USP_MIN_SAMPLE_DIV;
- sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
- temp_delta = ioclk_rate -
- (ioclk_rate + (set_rate * sample_div) / 2)
- / (set_rate * sample_div) * set_rate * sample_div;
-
- temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
- if (temp_delta < min_delta) {
- ioclk_div = (2 * ioclk_rate /
- (set_rate * sample_div) + 1) / 2 - 1;
- if (ioclk_div > SIRF_IOCLK_DIV_MAX)
- continue;
- min_delta = temp_delta;
- *sample_reg = sample_div;
- if (!temp_delta)
- break;
- }
- }
- return ioclk_div;
-}
-
-static unsigned int
-sirfsoc_uart_calc_sample_div(unsigned long baud_rate,
- unsigned long ioclk_rate, unsigned long *set_baud)
-{
- unsigned long min_delta = ~0UL;
- unsigned short sample_div;
- unsigned int regv = 0;
- unsigned long ioclk_div;
- unsigned long baud_tmp;
- int temp_delta;
-
- for (sample_div = SIRF_MIN_SAMPLE_DIV;
- sample_div <= SIRF_MAX_SAMPLE_DIV; sample_div++) {
- ioclk_div = (ioclk_rate / (baud_rate * (sample_div + 1))) - 1;
- if (ioclk_div > SIRF_IOCLK_DIV_MAX)
- continue;
- baud_tmp = ioclk_rate / ((ioclk_div + 1) * (sample_div + 1));
- temp_delta = baud_tmp - baud_rate;
- temp_delta = (temp_delta > 0) ? temp_delta : -temp_delta;
- if (temp_delta < min_delta) {
- regv = regv & (~SIRF_IOCLK_DIV_MASK);
- regv = regv | ioclk_div;
- regv = regv & (~SIRF_SAMPLE_DIV_MASK);
- regv = regv | (sample_div << SIRF_SAMPLE_DIV_SHIFT);
- min_delta = temp_delta;
- *set_baud = baud_tmp;
- }
- }
- return regv;
-}
-
-static void sirfsoc_uart_set_termios(struct uart_port *port,
- struct ktermios *termios,
- struct ktermios *old)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- unsigned long config_reg = 0;
- unsigned long baud_rate;
- unsigned long set_baud;
- unsigned long flags;
- unsigned long ic;
- unsigned int clk_div_reg = 0;
- unsigned long txfifo_op_reg, ioclk_rate;
- unsigned long rx_time_out;
- int threshold_div;
- u32 data_bit_len, stop_bit_len, len_val;
- unsigned long sample_div_reg = 0xf;
- ioclk_rate = port->uartclk;
-
- switch (termios->c_cflag & CSIZE) {
- default:
- case CS8:
- data_bit_len = 8;
- config_reg |= SIRFUART_DATA_BIT_LEN_8;
- break;
- case CS7:
- data_bit_len = 7;
- config_reg |= SIRFUART_DATA_BIT_LEN_7;
- break;
- case CS6:
- data_bit_len = 6;
- config_reg |= SIRFUART_DATA_BIT_LEN_6;
- break;
- case CS5:
- data_bit_len = 5;
- config_reg |= SIRFUART_DATA_BIT_LEN_5;
- break;
- }
- if (termios->c_cflag & CSTOPB) {
- config_reg |= SIRFUART_STOP_BIT_LEN_2;
- stop_bit_len = 2;
- } else
- stop_bit_len = 1;
-
- spin_lock_irqsave(&port->lock, flags);
- port->read_status_mask = uint_en->sirfsoc_rx_oflow_en;
- port->ignore_status_mask = 0;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= uint_en->sirfsoc_frm_err_en |
- uint_en->sirfsoc_parity_err_en;
- } else {
- if (termios->c_iflag & INPCK)
- port->read_status_mask |= uint_en->sirfsoc_frm_err_en;
- }
- if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
- port->read_status_mask |= uint_en->sirfsoc_rxd_brk_en;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |=
- uint_en->sirfsoc_frm_err_en |
- uint_en->sirfsoc_parity_err_en;
- if (termios->c_cflag & PARENB) {
- if (termios->c_cflag & CMSPAR) {
- if (termios->c_cflag & PARODD)
- config_reg |= SIRFUART_STICK_BIT_MARK;
- else
- config_reg |= SIRFUART_STICK_BIT_SPACE;
- } else {
- if (termios->c_cflag & PARODD)
- config_reg |= SIRFUART_STICK_BIT_ODD;
- else
- config_reg |= SIRFUART_STICK_BIT_EVEN;
- }
- }
- } else {
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |=
- uint_en->sirfsoc_frm_err_en;
- if (termios->c_cflag & PARENB)
- dev_warn(port->dev,
- "USP-UART not support parity err\n");
- }
- if (termios->c_iflag & IGNBRK) {
- port->ignore_status_mask |=
- uint_en->sirfsoc_rxd_brk_en;
- if (termios->c_iflag & IGNPAR)
- port->ignore_status_mask |=
- uint_en->sirfsoc_rx_oflow_en;
- }
- if ((termios->c_cflag & CREAD) == 0)
- port->ignore_status_mask |= SIRFUART_DUMMY_READ;
- /* Hardware Flow Control Settings */
- if (UART_ENABLE_MS(port, termios->c_cflag)) {
- if (!sirfport->ms_enabled)
- sirfsoc_uart_enable_ms(port);
- } else {
- if (sirfport->ms_enabled)
- sirfsoc_uart_disable_ms(port);
- }
- baud_rate = uart_get_baud_rate(port, termios, old, 0, 4000000);
- if (ioclk_rate == 150000000) {
- for (ic = 0; ic < SIRF_BAUD_RATE_SUPPORT_NR; ic++)
- if (baud_rate == baudrate_to_regv[ic].baud_rate)
- clk_div_reg = baudrate_to_regv[ic].reg_val;
- }
- set_baud = baud_rate;
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- if (unlikely(clk_div_reg == 0))
- clk_div_reg = sirfsoc_uart_calc_sample_div(baud_rate,
- ioclk_rate, &set_baud);
- wr_regl(port, ureg->sirfsoc_divisor, clk_div_reg);
- } else {
- clk_div_reg = sirfsoc_usp_calc_sample_div(baud_rate,
- ioclk_rate, &sample_div_reg);
- sample_div_reg--;
- set_baud = ((ioclk_rate / (clk_div_reg+1) - 1) /
- (sample_div_reg + 1));
- /* setting usp mode 2 */
- len_val = ((1 << SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET) |
- (1 << SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET));
- len_val |= ((clk_div_reg & SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK)
- << SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET);
- wr_regl(port, ureg->sirfsoc_mode2, len_val);
- }
- if (tty_termios_baud_rate(termios))
- tty_termios_encode_baud_rate(termios, set_baud, set_baud);
- /* set receive timeout && data bits len */
- rx_time_out = SIRFSOC_UART_RX_TIMEOUT(set_baud, 20000);
- rx_time_out = SIRFUART_RECV_TIMEOUT_VALUE(rx_time_out);
- txfifo_op_reg = rd_regl(port, ureg->sirfsoc_tx_fifo_op);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op,
- (txfifo_op_reg & ~SIRFUART_FIFO_START));
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART) {
- config_reg |= SIRFUART_UART_RECV_TIMEOUT(rx_time_out);
- wr_regl(port, ureg->sirfsoc_line_ctrl, config_reg);
- } else {
- /*tx frame ctrl*/
- len_val = (data_bit_len - 1) << SIRFSOC_USP_TX_DATA_LEN_OFFSET;
- len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
- SIRFSOC_USP_TX_FRAME_LEN_OFFSET;
- len_val |= ((data_bit_len - 1) <<
- SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET);
- len_val |= (((clk_div_reg & 0xc00) >> 10) <<
- SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET);
- wr_regl(port, ureg->sirfsoc_tx_frame_ctrl, len_val);
- /*rx frame ctrl*/
- len_val = (data_bit_len - 1) << SIRFSOC_USP_RX_DATA_LEN_OFFSET;
- len_val |= (data_bit_len + 1 + stop_bit_len - 1) <<
- SIRFSOC_USP_RX_FRAME_LEN_OFFSET;
- len_val |= (data_bit_len - 1) <<
- SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET;
- len_val |= (((clk_div_reg & 0xf000) >> 12) <<
- SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET);
- wr_regl(port, ureg->sirfsoc_rx_frame_ctrl, len_val);
- /*async param*/
- wr_regl(port, ureg->sirfsoc_async_param_reg,
- (SIRFUART_USP_RECV_TIMEOUT(rx_time_out)) |
- (sample_div_reg & SIRFSOC_USP_ASYNC_DIV2_MASK) <<
- SIRFSOC_USP_ASYNC_DIV2_OFFSET);
- }
- if (sirfport->tx_dma_chan)
- wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_DMA_MODE);
- else
- wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl, SIRFUART_IO_MODE);
- if (sirfport->rx_dma_chan)
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
- ~SIRFUART_IO_MODE);
- else
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
- SIRFUART_IO_MODE);
- sirfport->rx_period_time = 20000000;
- /* Reset Rx/Tx FIFO Threshold level for proper baudrate */
- if (set_baud < 1000000)
- threshold_div = 1;
- else
- threshold_div = 2;
- wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl,
- SIRFUART_FIFO_THD(port) / threshold_div);
- wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl,
- SIRFUART_FIFO_THD(port) / threshold_div);
- txfifo_op_reg |= SIRFUART_FIFO_START;
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, txfifo_op_reg);
- uart_update_timeout(port, termios->c_cflag, set_baud);
- wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_TX_EN | SIRFUART_RX_EN);
- spin_unlock_irqrestore(&port->lock, flags);
-}
-
-static void sirfsoc_uart_pm(struct uart_port *port, unsigned int state,
- unsigned int oldstate)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- if (!state)
- clk_prepare_enable(sirfport->clk);
- else
- clk_disable_unprepare(sirfport->clk);
-}
-
-static int sirfsoc_uart_startup(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_int_en *uint_en = &sirfport->uart_reg->uart_int_en;
- unsigned int index = port->line;
- int ret;
- irq_modify_status(port->irq, IRQ_NOREQUEST, IRQ_NOAUTOEN);
- ret = request_irq(port->irq,
- sirfsoc_uart_isr,
- 0,
- SIRFUART_PORT_NAME,
- sirfport);
- if (ret != 0) {
- dev_err(port->dev, "UART%d request IRQ line (%d) failed.\n",
- index, port->irq);
- goto irq_err;
- }
- /* initial hardware settings */
- wr_regl(port, ureg->sirfsoc_tx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_tx_dma_io_ctrl) |
- SIRFUART_IO_MODE);
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
- SIRFUART_IO_MODE);
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
- ~SIRFUART_RX_DMA_FLUSH);
- wr_regl(port, ureg->sirfsoc_tx_dma_io_len, 0);
- wr_regl(port, ureg->sirfsoc_rx_dma_io_len, 0);
- wr_regl(port, ureg->sirfsoc_tx_rx_en, SIRFUART_RX_EN | SIRFUART_TX_EN);
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
- wr_regl(port, ureg->sirfsoc_mode1,
- SIRFSOC_USP_ENDIAN_CTRL_LSBF |
- SIRFSOC_USP_EN);
- wr_regl(port, ureg->sirfsoc_tx_fifo_op, SIRFUART_FIFO_RESET);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_RESET);
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, 0);
- wr_regl(port, ureg->sirfsoc_tx_fifo_ctrl, SIRFUART_FIFO_THD(port));
- wr_regl(port, ureg->sirfsoc_rx_fifo_ctrl, SIRFUART_FIFO_THD(port));
- if (sirfport->rx_dma_chan)
- wr_regl(port, ureg->sirfsoc_rx_fifo_level_chk,
- SIRFUART_RX_FIFO_CHK_SC(port->line, 0x1) |
- SIRFUART_RX_FIFO_CHK_LC(port->line, 0x2) |
- SIRFUART_RX_FIFO_CHK_HC(port->line, 0x4));
- if (sirfport->tx_dma_chan) {
- sirfport->tx_dma_state = TX_DMA_IDLE;
- wr_regl(port, ureg->sirfsoc_tx_fifo_level_chk,
- SIRFUART_TX_FIFO_CHK_SC(port->line, 0x1b) |
- SIRFUART_TX_FIFO_CHK_LC(port->line, 0xe) |
- SIRFUART_TX_FIFO_CHK_HC(port->line, 0x4));
- }
- sirfport->ms_enabled = false;
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
- sirfport->hw_flow_ctrl) {
- irq_modify_status(gpio_to_irq(sirfport->cts_gpio),
- IRQ_NOREQUEST, IRQ_NOAUTOEN);
- ret = request_irq(gpio_to_irq(sirfport->cts_gpio),
- sirfsoc_uart_usp_cts_handler, IRQF_TRIGGER_FALLING |
- IRQF_TRIGGER_RISING, "usp_cts_irq", sirfport);
- if (ret != 0) {
- dev_err(port->dev, "UART-USP:request gpio irq fail\n");
- goto init_rx_err;
- }
- }
- if (sirfport->uart_reg->uart_type == SIRF_REAL_UART &&
- sirfport->rx_dma_chan)
- wr_regl(port, ureg->sirfsoc_swh_dma_io,
- SIRFUART_CLEAR_RX_ADDR_EN);
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
- sirfport->rx_dma_chan)
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
- SIRFSOC_USP_FRADDR_CLR_EN);
- if (sirfport->rx_dma_chan && !sirfport->is_hrt_enabled) {
- sirfport->is_hrt_enabled = true;
- sirfport->rx_period_time = 20000000;
- sirfport->rx_last_pos = -1;
- sirfport->pio_fetch_cnt = 0;
- sirfport->rx_dma_items.xmit.tail =
- sirfport->rx_dma_items.xmit.head = 0;
- hrtimer_start(&sirfport->hrt,
- ns_to_ktime(sirfport->rx_period_time),
- HRTIMER_MODE_REL);
- }
- wr_regl(port, ureg->sirfsoc_rx_fifo_op, SIRFUART_FIFO_START);
- if (sirfport->rx_dma_chan)
- sirfsoc_uart_start_next_rx_dma(port);
- else {
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- rd_regl(port, ureg->sirfsoc_int_en_reg) |
- SIRFUART_RX_IO_INT_EN(uint_en,
- sirfport->uart_reg->uart_type));
- else
- wr_regl(port, ureg->sirfsoc_int_en_reg,
- SIRFUART_RX_IO_INT_EN(uint_en,
- sirfport->uart_reg->uart_type));
- }
- enable_irq(port->irq);
-
- return 0;
-init_rx_err:
- free_irq(port->irq, sirfport);
-irq_err:
- return ret;
-}
-
-static void sirfsoc_uart_shutdown(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct circ_buf *xmit;
-
- xmit = &sirfport->rx_dma_items.xmit;
- if (!sirfport->is_atlas7)
- wr_regl(port, ureg->sirfsoc_int_en_reg, 0);
- else
- wr_regl(port, ureg->sirfsoc_int_en_clr_reg, ~0UL);
-
- free_irq(port->irq, sirfport);
- if (sirfport->ms_enabled)
- sirfsoc_uart_disable_ms(port);
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART &&
- sirfport->hw_flow_ctrl) {
- gpio_set_value(sirfport->rts_gpio, 1);
- free_irq(gpio_to_irq(sirfport->cts_gpio), sirfport);
- }
- if (sirfport->tx_dma_chan)
- sirfport->tx_dma_state = TX_DMA_IDLE;
- if (sirfport->rx_dma_chan && sirfport->is_hrt_enabled) {
- while (((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
- SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt) &&
- !CIRC_CNT(xmit->head, xmit->tail,
- SIRFSOC_RX_DMA_BUF_SIZE))
- ;
- sirfport->is_hrt_enabled = false;
- hrtimer_cancel(&sirfport->hrt);
- }
-}
-
-static const char *sirfsoc_uart_type(struct uart_port *port)
-{
- return port->type == SIRFSOC_PORT_TYPE ? SIRFUART_PORT_NAME : NULL;
-}
-
-static int sirfsoc_uart_request_port(struct uart_port *port)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_uart_param *uart_param = &sirfport->uart_reg->uart_param;
- void *ret;
- ret = request_mem_region(port->mapbase,
- SIRFUART_MAP_SIZE, uart_param->port_name);
- return ret ? 0 : -EBUSY;
-}
-
-static void sirfsoc_uart_release_port(struct uart_port *port)
-{
- release_mem_region(port->mapbase, SIRFUART_MAP_SIZE);
-}
-
-static void sirfsoc_uart_config_port(struct uart_port *port, int flags)
-{
- if (flags & UART_CONFIG_TYPE) {
- port->type = SIRFSOC_PORT_TYPE;
- sirfsoc_uart_request_port(port);
- }
-}
-
-static const struct uart_ops sirfsoc_uart_ops = {
- .tx_empty = sirfsoc_uart_tx_empty,
- .get_mctrl = sirfsoc_uart_get_mctrl,
- .set_mctrl = sirfsoc_uart_set_mctrl,
- .stop_tx = sirfsoc_uart_stop_tx,
- .start_tx = sirfsoc_uart_start_tx,
- .stop_rx = sirfsoc_uart_stop_rx,
- .enable_ms = sirfsoc_uart_enable_ms,
- .break_ctl = sirfsoc_uart_break_ctl,
- .startup = sirfsoc_uart_startup,
- .shutdown = sirfsoc_uart_shutdown,
- .set_termios = sirfsoc_uart_set_termios,
- .pm = sirfsoc_uart_pm,
- .type = sirfsoc_uart_type,
- .release_port = sirfsoc_uart_release_port,
- .request_port = sirfsoc_uart_request_port,
- .config_port = sirfsoc_uart_config_port,
-};
-
-#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
-static int __init
-sirfsoc_uart_console_setup(struct console *co, char *options)
-{
- unsigned int baud = 115200;
- unsigned int bits = 8;
- unsigned int parity = 'n';
- unsigned int flow = 'n';
- struct sirfsoc_uart_port *sirfport;
- struct sirfsoc_register *ureg;
- if (co->index < 0 || co->index >= SIRFSOC_UART_NR)
- co->index = 1;
- sirfport = sirf_ports[co->index];
- if (!sirfport)
- return -ENODEV;
- ureg = &sirfport->uart_reg->uart_reg;
- if (!sirfport->port.mapbase)
- return -ENODEV;
-
- /* enable usp in mode1 register */
- if (sirfport->uart_reg->uart_type == SIRF_USP_UART)
- wr_regl(&sirfport->port, ureg->sirfsoc_mode1, SIRFSOC_USP_EN |
- SIRFSOC_USP_ENDIAN_CTRL_LSBF);
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
- sirfport->port.cons = co;
-
- /* default console tx/rx transfer using io mode */
- sirfport->rx_dma_chan = NULL;
- sirfport->tx_dma_chan = NULL;
- return uart_set_options(&sirfport->port, co, baud, parity, bits, flow);
-}
-
-static void sirfsoc_uart_console_putchar(struct uart_port *port, int ch)
-{
- struct sirfsoc_uart_port *sirfport = to_sirfport(port);
- struct sirfsoc_register *ureg = &sirfport->uart_reg->uart_reg;
- struct sirfsoc_fifo_status *ufifo_st = &sirfport->uart_reg->fifo_status;
- while (rd_regl(port, ureg->sirfsoc_tx_fifo_status) &
- ufifo_st->ff_full(port))
- cpu_relax();
- wr_regl(port, ureg->sirfsoc_tx_fifo_data, ch);
-}
-
-static void sirfsoc_uart_console_write(struct console *co, const char *s,
- unsigned int count)
-{
- struct sirfsoc_uart_port *sirfport = sirf_ports[co->index];
-
- uart_console_write(&sirfport->port, s, count,
- sirfsoc_uart_console_putchar);
-}
-
-static struct console sirfsoc_uart_console = {
- .name = SIRFSOC_UART_NAME,
- .device = uart_console_device,
- .flags = CON_PRINTBUFFER,
- .index = -1,
- .write = sirfsoc_uart_console_write,
- .setup = sirfsoc_uart_console_setup,
- .data = &sirfsoc_uart_drv,
-};
-
-static int __init sirfsoc_uart_console_init(void)
-{
- register_console(&sirfsoc_uart_console);
- return 0;
-}
-console_initcall(sirfsoc_uart_console_init);
-#endif
-
-static struct uart_driver sirfsoc_uart_drv = {
- .owner = THIS_MODULE,
- .driver_name = SIRFUART_PORT_NAME,
- .nr = SIRFSOC_UART_NR,
- .dev_name = SIRFSOC_UART_NAME,
- .major = SIRFSOC_UART_MAJOR,
- .minor = SIRFSOC_UART_MINOR,
-#ifdef CONFIG_SERIAL_SIRFSOC_CONSOLE
- .cons = &sirfsoc_uart_console,
-#else
- .cons = NULL,
-#endif
-};
-
-static enum hrtimer_restart
- sirfsoc_uart_rx_dma_hrtimer_callback(struct hrtimer *hrt)
-{
- struct sirfsoc_uart_port *sirfport;
- struct uart_port *port;
- int count, inserted;
- struct dma_tx_state tx_state;
- struct tty_struct *tty;
- struct sirfsoc_register *ureg;
- struct circ_buf *xmit;
- struct sirfsoc_fifo_status *ufifo_st;
- int max_pio_cnt;
-
- sirfport = container_of(hrt, struct sirfsoc_uart_port, hrt);
- port = &sirfport->port;
- inserted = 0;
- tty = port->state->port.tty;
- ureg = &sirfport->uart_reg->uart_reg;
- xmit = &sirfport->rx_dma_items.xmit;
- ufifo_st = &sirfport->uart_reg->fifo_status;
-
- dmaengine_tx_status(sirfport->rx_dma_chan,
- sirfport->rx_dma_items.cookie, &tx_state);
- if (SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue !=
- sirfport->rx_last_pos) {
- xmit->head = SIRFSOC_RX_DMA_BUF_SIZE - tx_state.residue;
- sirfport->rx_last_pos = xmit->head;
- sirfport->pio_fetch_cnt = 0;
- }
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
- SIRFSOC_RX_DMA_BUF_SIZE);
- while (count > 0) {
- inserted = tty_insert_flip_string(tty->port,
- (const unsigned char *)&xmit->buf[xmit->tail], count);
- if (!inserted)
- goto next_hrt;
- port->icount.rx += inserted;
- xmit->tail = (xmit->tail + inserted) &
- (SIRFSOC_RX_DMA_BUF_SIZE - 1);
- count = CIRC_CNT_TO_END(xmit->head, xmit->tail,
- SIRFSOC_RX_DMA_BUF_SIZE);
- tty_flip_buffer_push(tty->port);
- }
- /*
- * if RX DMA buffer data have all push into tty buffer, and there is
- * only little data(less than a dma transfer unit) left in rxfifo,
- * fetch it out in pio mode and switch back to dma immediately
- */
- if (!inserted && !count &&
- ((rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
- SIRFUART_RX_FIFO_MASK) > sirfport->pio_fetch_cnt)) {
- dmaengine_pause(sirfport->rx_dma_chan);
- /* switch to pio mode */
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) |
- SIRFUART_IO_MODE);
- /*
- * UART controller SWH_DMA_IO register have CLEAR_RX_ADDR_EN
- * When found changing I/O to DMA mode, it clears
- * two low bits of read point;
- * USP have similar FRADDR_CLR_EN bit in USP_RX_DMA_IO_CTRL.
- * Fetch data out from rxfifo into DMA buffer in PIO mode,
- * while switch back to DMA mode, the data fetched will override
- * by DMA, as hardware have a strange behaviour:
- * after switch back to DMA mode, check rxfifo status it will
- * be the number PIO fetched, so record the fetched data count
- * to avoid the repeated fetch
- */
- max_pio_cnt = 3;
- while (!(rd_regl(port, ureg->sirfsoc_rx_fifo_status) &
- ufifo_st->ff_empty(port)) && max_pio_cnt--) {
- xmit->buf[xmit->head] =
- rd_regl(port, ureg->sirfsoc_rx_fifo_data);
- xmit->head = (xmit->head + 1) &
- (SIRFSOC_RX_DMA_BUF_SIZE - 1);
- sirfport->pio_fetch_cnt++;
- }
- /* switch back to dma mode */
- wr_regl(port, ureg->sirfsoc_rx_dma_io_ctrl,
- rd_regl(port, ureg->sirfsoc_rx_dma_io_ctrl) &
- ~SIRFUART_IO_MODE);
- dmaengine_resume(sirfport->rx_dma_chan);
- }
-next_hrt:
- hrtimer_forward_now(hrt, ns_to_ktime(sirfport->rx_period_time));
- return HRTIMER_RESTART;
-}
-
-static const struct of_device_id sirfsoc_uart_ids[] = {
- { .compatible = "sirf,prima2-uart", .data = &sirfsoc_uart,},
- { .compatible = "sirf,atlas7-uart", .data = &sirfsoc_uart},
- { .compatible = "sirf,prima2-usp-uart", .data = &sirfsoc_usp},
- { .compatible = "sirf,atlas7-usp-uart", .data = &sirfsoc_usp},
- {}
-};
-MODULE_DEVICE_TABLE(of, sirfsoc_uart_ids);
-
-static int sirfsoc_uart_probe(struct platform_device *pdev)
-{
- struct device_node *np = pdev->dev.of_node;
- struct sirfsoc_uart_port *sirfport;
- struct uart_port *port;
- struct resource *res;
- int ret;
- struct dma_slave_config slv_cfg = {
- .src_maxburst = 1,
- };
- struct dma_slave_config tx_slv_cfg = {
- .dst_maxburst = 2,
- };
- const struct of_device_id *match;
-
- match = of_match_node(sirfsoc_uart_ids, np);
- sirfport = devm_kzalloc(&pdev->dev, sizeof(*sirfport), GFP_KERNEL);
- if (!sirfport) {
- ret = -ENOMEM;
- goto err;
- }
- sirfport->port.line = of_alias_get_id(np, "serial");
- if (sirfport->port.line >= ARRAY_SIZE(sirf_ports)) {
- dev_err(&pdev->dev, "serial%d out of range\n",
- sirfport->port.line);
- return -EINVAL;
- }
- sirf_ports[sirfport->port.line] = sirfport;
- sirfport->port.iotype = UPIO_MEM;
- sirfport->port.flags = UPF_BOOT_AUTOCONF;
- port = &sirfport->port;
- port->dev = &pdev->dev;
- port->private_data = sirfport;
- sirfport->uart_reg = (struct sirfsoc_uart_register *)match->data;
-
- sirfport->hw_flow_ctrl =
- of_property_read_bool(np, "uart-has-rtscts") ||
- of_property_read_bool(np, "sirf,uart-has-rtscts") /* deprecated */;
- if (of_device_is_compatible(np, "sirf,prima2-uart") ||
- of_device_is_compatible(np, "sirf,atlas7-uart"))
- sirfport->uart_reg->uart_type = SIRF_REAL_UART;
- if (of_device_is_compatible(np, "sirf,prima2-usp-uart") ||
- of_device_is_compatible(np, "sirf,atlas7-usp-uart")) {
- sirfport->uart_reg->uart_type = SIRF_USP_UART;
- if (!sirfport->hw_flow_ctrl)
- goto usp_no_flow_control;
- if (of_find_property(np, "cts-gpios", NULL))
- sirfport->cts_gpio =
- of_get_named_gpio(np, "cts-gpios", 0);
- else
- sirfport->cts_gpio = -1;
- if (of_find_property(np, "rts-gpios", NULL))
- sirfport->rts_gpio =
- of_get_named_gpio(np, "rts-gpios", 0);
- else
- sirfport->rts_gpio = -1;
-
- if ((!gpio_is_valid(sirfport->cts_gpio) ||
- !gpio_is_valid(sirfport->rts_gpio))) {
- ret = -EINVAL;
- dev_err(&pdev->dev,
- "Usp flow control must have cts and rts gpio");
- goto err;
- }
- ret = devm_gpio_request(&pdev->dev, sirfport->cts_gpio,
- "usp-cts-gpio");
- if (ret) {
- dev_err(&pdev->dev, "Unable request cts gpio");
- goto err;
- }
- gpio_direction_input(sirfport->cts_gpio);
- ret = devm_gpio_request(&pdev->dev, sirfport->rts_gpio,
- "usp-rts-gpio");
- if (ret) {
- dev_err(&pdev->dev, "Unable request rts gpio");
- goto err;
- }
- gpio_direction_output(sirfport->rts_gpio, 1);
- }
-usp_no_flow_control:
- if (of_device_is_compatible(np, "sirf,atlas7-uart") ||
- of_device_is_compatible(np, "sirf,atlas7-usp-uart"))
- sirfport->is_atlas7 = true;
-
- if (of_property_read_u32(np, "fifosize", &port->fifosize)) {
- dev_err(&pdev->dev,
- "Unable to find fifosize in uart node.\n");
- ret = -EFAULT;
- goto err;
- }
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "Insufficient resources.\n");
- ret = -EFAULT;
- goto err;
- }
- port->mapbase = res->start;
- port->membase = devm_ioremap(&pdev->dev,
- res->start, resource_size(res));
- if (!port->membase) {
- dev_err(&pdev->dev, "Cannot remap resource.\n");
- ret = -ENOMEM;
- goto err;
- }
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL) {
- dev_err(&pdev->dev, "Insufficient resources.\n");
- ret = -EFAULT;
- goto err;
- }
- port->irq = res->start;
-
- sirfport->clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(sirfport->clk)) {
- ret = PTR_ERR(sirfport->clk);
- goto err;
- }
- port->uartclk = clk_get_rate(sirfport->clk);
-
- port->ops = &sirfsoc_uart_ops;
- spin_lock_init(&port->lock);
-
- platform_set_drvdata(pdev, sirfport);
- ret = uart_add_one_port(&sirfsoc_uart_drv, port);
- if (ret != 0) {
- dev_err(&pdev->dev, "Cannot add UART port(%d).\n", pdev->id);
- goto err;
- }
-
- sirfport->rx_dma_chan = dma_request_slave_channel(port->dev, "rx");
- sirfport->rx_dma_items.xmit.buf =
- dma_alloc_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- &sirfport->rx_dma_items.dma_addr, GFP_KERNEL);
- if (!sirfport->rx_dma_items.xmit.buf) {
- dev_err(port->dev, "Uart alloc bufa failed\n");
- ret = -ENOMEM;
- goto alloc_coherent_err;
- }
- sirfport->rx_dma_items.xmit.head =
- sirfport->rx_dma_items.xmit.tail = 0;
- if (sirfport->rx_dma_chan)
- dmaengine_slave_config(sirfport->rx_dma_chan, &slv_cfg);
- sirfport->tx_dma_chan = dma_request_slave_channel(port->dev, "tx");
- if (sirfport->tx_dma_chan)
- dmaengine_slave_config(sirfport->tx_dma_chan, &tx_slv_cfg);
- if (sirfport->rx_dma_chan) {
- hrtimer_init(&sirfport->hrt, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
- sirfport->hrt.function = sirfsoc_uart_rx_dma_hrtimer_callback;
- sirfport->is_hrt_enabled = false;
- }
-
- return 0;
-alloc_coherent_err:
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items.xmit.buf,
- sirfport->rx_dma_items.dma_addr);
- dma_release_channel(sirfport->rx_dma_chan);
-err:
- return ret;
-}
-
-static int sirfsoc_uart_remove(struct platform_device *pdev)
-{
- struct sirfsoc_uart_port *sirfport = platform_get_drvdata(pdev);
- struct uart_port *port = &sirfport->port;
- uart_remove_one_port(&sirfsoc_uart_drv, port);
- if (sirfport->rx_dma_chan) {
- dmaengine_terminate_all(sirfport->rx_dma_chan);
- dma_release_channel(sirfport->rx_dma_chan);
- dma_free_coherent(port->dev, SIRFSOC_RX_DMA_BUF_SIZE,
- sirfport->rx_dma_items.xmit.buf,
- sirfport->rx_dma_items.dma_addr);
- }
- if (sirfport->tx_dma_chan) {
- dmaengine_terminate_all(sirfport->tx_dma_chan);
- dma_release_channel(sirfport->tx_dma_chan);
- }
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int
-sirfsoc_uart_suspend(struct device *pdev)
-{
- struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
- struct uart_port *port = &sirfport->port;
- uart_suspend_port(&sirfsoc_uart_drv, port);
- return 0;
-}
-
-static int sirfsoc_uart_resume(struct device *pdev)
-{
- struct sirfsoc_uart_port *sirfport = dev_get_drvdata(pdev);
- struct uart_port *port = &sirfport->port;
- uart_resume_port(&sirfsoc_uart_drv, port);
- return 0;
-}
-#endif
-
-static const struct dev_pm_ops sirfsoc_uart_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(sirfsoc_uart_suspend, sirfsoc_uart_resume)
-};
-
-static struct platform_driver sirfsoc_uart_driver = {
- .probe = sirfsoc_uart_probe,
- .remove = sirfsoc_uart_remove,
- .driver = {
- .name = SIRFUART_PORT_NAME,
- .of_match_table = sirfsoc_uart_ids,
- .pm = &sirfsoc_uart_pm_ops,
- },
-};
-
-static int __init sirfsoc_uart_init(void)
-{
- int ret = 0;
-
- ret = uart_register_driver(&sirfsoc_uart_drv);
- if (ret)
- goto out;
-
- ret = platform_driver_register(&sirfsoc_uart_driver);
- if (ret)
- uart_unregister_driver(&sirfsoc_uart_drv);
-out:
- return ret;
-}
-module_init(sirfsoc_uart_init);
-
-static void __exit sirfsoc_uart_exit(void)
-{
- platform_driver_unregister(&sirfsoc_uart_driver);
- uart_unregister_driver(&sirfsoc_uart_drv);
-}
-module_exit(sirfsoc_uart_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Bin Shi <Bin.Shi@csr.com>, Rong Wang<Rong.Wang@csr.com>");
-MODULE_DESCRIPTION("CSR SiRFprimaII Uart Driver");
diff --git a/drivers/tty/serial/sirfsoc_uart.h b/drivers/tty/serial/sirfsoc_uart.h
deleted file mode 100644
index fb88ac565227..000000000000
--- a/drivers/tty/serial/sirfsoc_uart.h
+++ /dev/null
@@ -1,447 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Drivers for CSR SiRFprimaII onboard UARTs.
- *
- * Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
- */
-#include <linux/bitops.h>
-#include <linux/log2.h>
-#include <linux/hrtimer.h>
-struct sirfsoc_uart_param {
- const char *uart_name;
- const char *port_name;
-};
-
-struct sirfsoc_register {
- /* hardware uart specific */
- u32 sirfsoc_line_ctrl;
- u32 sirfsoc_divisor;
- /* uart - usp common */
- u32 sirfsoc_tx_rx_en;
- u32 sirfsoc_int_en_reg;
- u32 sirfsoc_int_st_reg;
- u32 sirfsoc_int_en_clr_reg;
- u32 sirfsoc_tx_dma_io_ctrl;
- u32 sirfsoc_tx_dma_io_len;
- u32 sirfsoc_tx_fifo_ctrl;
- u32 sirfsoc_tx_fifo_level_chk;
- u32 sirfsoc_tx_fifo_op;
- u32 sirfsoc_tx_fifo_status;
- u32 sirfsoc_tx_fifo_data;
- u32 sirfsoc_rx_dma_io_ctrl;
- u32 sirfsoc_rx_dma_io_len;
- u32 sirfsoc_rx_fifo_ctrl;
- u32 sirfsoc_rx_fifo_level_chk;
- u32 sirfsoc_rx_fifo_op;
- u32 sirfsoc_rx_fifo_status;
- u32 sirfsoc_rx_fifo_data;
- u32 sirfsoc_afc_ctrl;
- u32 sirfsoc_swh_dma_io;
- /* hardware usp specific */
- u32 sirfsoc_mode1;
- u32 sirfsoc_mode2;
- u32 sirfsoc_tx_frame_ctrl;
- u32 sirfsoc_rx_frame_ctrl;
- u32 sirfsoc_async_param_reg;
-};
-
-typedef u32 (*fifo_full_mask)(struct uart_port *port);
-typedef u32 (*fifo_empty_mask)(struct uart_port *port);
-
-struct sirfsoc_fifo_status {
- fifo_full_mask ff_full;
- fifo_empty_mask ff_empty;
-};
-
-struct sirfsoc_int_en {
- u32 sirfsoc_rx_done_en;
- u32 sirfsoc_tx_done_en;
- u32 sirfsoc_rx_oflow_en;
- u32 sirfsoc_tx_allout_en;
- u32 sirfsoc_rx_io_dma_en;
- u32 sirfsoc_tx_io_dma_en;
- u32 sirfsoc_rxfifo_full_en;
- u32 sirfsoc_txfifo_empty_en;
- u32 sirfsoc_rxfifo_thd_en;
- u32 sirfsoc_txfifo_thd_en;
- u32 sirfsoc_frm_err_en;
- u32 sirfsoc_rxd_brk_en;
- u32 sirfsoc_rx_timeout_en;
- u32 sirfsoc_parity_err_en;
- u32 sirfsoc_cts_en;
- u32 sirfsoc_rts_en;
-};
-
-struct sirfsoc_int_status {
- u32 sirfsoc_rx_done;
- u32 sirfsoc_tx_done;
- u32 sirfsoc_rx_oflow;
- u32 sirfsoc_tx_allout;
- u32 sirfsoc_rx_io_dma;
- u32 sirfsoc_tx_io_dma;
- u32 sirfsoc_rxfifo_full;
- u32 sirfsoc_txfifo_empty;
- u32 sirfsoc_rxfifo_thd;
- u32 sirfsoc_txfifo_thd;
- u32 sirfsoc_frm_err;
- u32 sirfsoc_rxd_brk;
- u32 sirfsoc_rx_timeout;
- u32 sirfsoc_parity_err;
- u32 sirfsoc_cts;
- u32 sirfsoc_rts;
-};
-
-enum sirfsoc_uart_type {
- SIRF_REAL_UART,
- SIRF_USP_UART,
-};
-
-struct sirfsoc_uart_register {
- struct sirfsoc_register uart_reg;
- struct sirfsoc_int_en uart_int_en;
- struct sirfsoc_int_status uart_int_st;
- struct sirfsoc_fifo_status fifo_status;
- struct sirfsoc_uart_param uart_param;
- enum sirfsoc_uart_type uart_type;
-};
-
-static u32 uart_usp_ff_full_mask(struct uart_port *port)
-{
- u32 full_bit;
-
- full_bit = ilog2(port->fifosize);
- return (1 << full_bit);
-}
-
-static u32 uart_usp_ff_empty_mask(struct uart_port *port)
-{
- u32 empty_bit;
-
- empty_bit = ilog2(port->fifosize) + 1;
- return (1 << empty_bit);
-}
-
-static struct sirfsoc_uart_register sirfsoc_usp = {
- .uart_reg = {
- .sirfsoc_mode1 = 0x0000,
- .sirfsoc_mode2 = 0x0004,
- .sirfsoc_tx_frame_ctrl = 0x0008,
- .sirfsoc_rx_frame_ctrl = 0x000c,
- .sirfsoc_tx_rx_en = 0x0010,
- .sirfsoc_int_en_reg = 0x0014,
- .sirfsoc_int_st_reg = 0x0018,
- .sirfsoc_async_param_reg = 0x0024,
- .sirfsoc_tx_dma_io_ctrl = 0x0100,
- .sirfsoc_tx_dma_io_len = 0x0104,
- .sirfsoc_tx_fifo_ctrl = 0x0108,
- .sirfsoc_tx_fifo_level_chk = 0x010c,
- .sirfsoc_tx_fifo_op = 0x0110,
- .sirfsoc_tx_fifo_status = 0x0114,
- .sirfsoc_tx_fifo_data = 0x0118,
- .sirfsoc_rx_dma_io_ctrl = 0x0120,
- .sirfsoc_rx_dma_io_len = 0x0124,
- .sirfsoc_rx_fifo_ctrl = 0x0128,
- .sirfsoc_rx_fifo_level_chk = 0x012c,
- .sirfsoc_rx_fifo_op = 0x0130,
- .sirfsoc_rx_fifo_status = 0x0134,
- .sirfsoc_rx_fifo_data = 0x0138,
- .sirfsoc_int_en_clr_reg = 0x140,
- },
- .uart_int_en = {
- .sirfsoc_rx_done_en = BIT(0),
- .sirfsoc_tx_done_en = BIT(1),
- .sirfsoc_rx_oflow_en = BIT(2),
- .sirfsoc_tx_allout_en = BIT(3),
- .sirfsoc_rx_io_dma_en = BIT(4),
- .sirfsoc_tx_io_dma_en = BIT(5),
- .sirfsoc_rxfifo_full_en = BIT(6),
- .sirfsoc_txfifo_empty_en = BIT(7),
- .sirfsoc_rxfifo_thd_en = BIT(8),
- .sirfsoc_txfifo_thd_en = BIT(9),
- .sirfsoc_frm_err_en = BIT(10),
- .sirfsoc_rx_timeout_en = BIT(11),
- .sirfsoc_rxd_brk_en = BIT(15),
- },
- .uart_int_st = {
- .sirfsoc_rx_done = BIT(0),
- .sirfsoc_tx_done = BIT(1),
- .sirfsoc_rx_oflow = BIT(2),
- .sirfsoc_tx_allout = BIT(3),
- .sirfsoc_rx_io_dma = BIT(4),
- .sirfsoc_tx_io_dma = BIT(5),
- .sirfsoc_rxfifo_full = BIT(6),
- .sirfsoc_txfifo_empty = BIT(7),
- .sirfsoc_rxfifo_thd = BIT(8),
- .sirfsoc_txfifo_thd = BIT(9),
- .sirfsoc_frm_err = BIT(10),
- .sirfsoc_rx_timeout = BIT(11),
- .sirfsoc_rxd_brk = BIT(15),
- },
- .fifo_status = {
- .ff_full = uart_usp_ff_full_mask,
- .ff_empty = uart_usp_ff_empty_mask,
- },
- .uart_param = {
- .uart_name = "ttySiRF",
- .port_name = "sirfsoc-uart",
- },
-};
-
-static struct sirfsoc_uart_register sirfsoc_uart = {
- .uart_reg = {
- .sirfsoc_line_ctrl = 0x0040,
- .sirfsoc_tx_rx_en = 0x004c,
- .sirfsoc_divisor = 0x0050,
- .sirfsoc_int_en_reg = 0x0054,
- .sirfsoc_int_st_reg = 0x0058,
- .sirfsoc_int_en_clr_reg = 0x0060,
- .sirfsoc_tx_dma_io_ctrl = 0x0100,
- .sirfsoc_tx_dma_io_len = 0x0104,
- .sirfsoc_tx_fifo_ctrl = 0x0108,
- .sirfsoc_tx_fifo_level_chk = 0x010c,
- .sirfsoc_tx_fifo_op = 0x0110,
- .sirfsoc_tx_fifo_status = 0x0114,
- .sirfsoc_tx_fifo_data = 0x0118,
- .sirfsoc_rx_dma_io_ctrl = 0x0120,
- .sirfsoc_rx_dma_io_len = 0x0124,
- .sirfsoc_rx_fifo_ctrl = 0x0128,
- .sirfsoc_rx_fifo_level_chk = 0x012c,
- .sirfsoc_rx_fifo_op = 0x0130,
- .sirfsoc_rx_fifo_status = 0x0134,
- .sirfsoc_rx_fifo_data = 0x0138,
- .sirfsoc_afc_ctrl = 0x0140,
- .sirfsoc_swh_dma_io = 0x0148,
- },
- .uart_int_en = {
- .sirfsoc_rx_done_en = BIT(0),
- .sirfsoc_tx_done_en = BIT(1),
- .sirfsoc_rx_oflow_en = BIT(2),
- .sirfsoc_tx_allout_en = BIT(3),
- .sirfsoc_rx_io_dma_en = BIT(4),
- .sirfsoc_tx_io_dma_en = BIT(5),
- .sirfsoc_rxfifo_full_en = BIT(6),
- .sirfsoc_txfifo_empty_en = BIT(7),
- .sirfsoc_rxfifo_thd_en = BIT(8),
- .sirfsoc_txfifo_thd_en = BIT(9),
- .sirfsoc_frm_err_en = BIT(10),
- .sirfsoc_rxd_brk_en = BIT(11),
- .sirfsoc_rx_timeout_en = BIT(12),
- .sirfsoc_parity_err_en = BIT(13),
- .sirfsoc_cts_en = BIT(14),
- .sirfsoc_rts_en = BIT(15),
- },
- .uart_int_st = {
- .sirfsoc_rx_done = BIT(0),
- .sirfsoc_tx_done = BIT(1),
- .sirfsoc_rx_oflow = BIT(2),
- .sirfsoc_tx_allout = BIT(3),
- .sirfsoc_rx_io_dma = BIT(4),
- .sirfsoc_tx_io_dma = BIT(5),
- .sirfsoc_rxfifo_full = BIT(6),
- .sirfsoc_txfifo_empty = BIT(7),
- .sirfsoc_rxfifo_thd = BIT(8),
- .sirfsoc_txfifo_thd = BIT(9),
- .sirfsoc_frm_err = BIT(10),
- .sirfsoc_rxd_brk = BIT(11),
- .sirfsoc_rx_timeout = BIT(12),
- .sirfsoc_parity_err = BIT(13),
- .sirfsoc_cts = BIT(14),
- .sirfsoc_rts = BIT(15),
- },
- .fifo_status = {
- .ff_full = uart_usp_ff_full_mask,
- .ff_empty = uart_usp_ff_empty_mask,
- },
- .uart_param = {
- .uart_name = "ttySiRF",
- .port_name = "sirfsoc_uart",
- },
-};
-/* uart io ctrl */
-#define SIRFUART_DATA_BIT_LEN_MASK 0x3
-#define SIRFUART_DATA_BIT_LEN_5 BIT(0)
-#define SIRFUART_DATA_BIT_LEN_6 1
-#define SIRFUART_DATA_BIT_LEN_7 2
-#define SIRFUART_DATA_BIT_LEN_8 3
-#define SIRFUART_STOP_BIT_LEN_1 0
-#define SIRFUART_STOP_BIT_LEN_2 BIT(2)
-#define SIRFUART_PARITY_EN BIT(3)
-#define SIRFUART_EVEN_BIT BIT(4)
-#define SIRFUART_STICK_BIT_MASK (7 << 3)
-#define SIRFUART_STICK_BIT_NONE (0 << 3)
-#define SIRFUART_STICK_BIT_EVEN BIT(3)
-#define SIRFUART_STICK_BIT_ODD (3 << 3)
-#define SIRFUART_STICK_BIT_MARK (5 << 3)
-#define SIRFUART_STICK_BIT_SPACE (7 << 3)
-#define SIRFUART_SET_BREAK BIT(6)
-#define SIRFUART_LOOP_BACK BIT(7)
-#define SIRFUART_PARITY_MASK (7 << 3)
-#define SIRFUART_DUMMY_READ BIT(16)
-#define SIRFUART_AFC_CTRL_RX_THD 0x70
-#define SIRFUART_AFC_RX_EN BIT(8)
-#define SIRFUART_AFC_TX_EN BIT(9)
-#define SIRFUART_AFC_CTS_CTRL BIT(10)
-#define SIRFUART_AFC_RTS_CTRL BIT(11)
-#define SIRFUART_AFC_CTS_STATUS BIT(12)
-#define SIRFUART_AFC_RTS_STATUS BIT(13)
-/* UART FIFO Register */
-#define SIRFUART_FIFO_STOP 0x0
-#define SIRFUART_FIFO_RESET BIT(0)
-#define SIRFUART_FIFO_START BIT(1)
-
-#define SIRFUART_RX_EN BIT(0)
-#define SIRFUART_TX_EN BIT(1)
-
-#define SIRFUART_IO_MODE BIT(0)
-#define SIRFUART_DMA_MODE 0x0
-#define SIRFUART_RX_DMA_FLUSH 0x4
-
-#define SIRFUART_CLEAR_RX_ADDR_EN 0x2
-/* Baud Rate Calculation */
-#define SIRF_USP_MIN_SAMPLE_DIV 0x1
-#define SIRF_MIN_SAMPLE_DIV 0xf
-#define SIRF_MAX_SAMPLE_DIV 0x3f
-#define SIRF_IOCLK_DIV_MAX 0xffff
-#define SIRF_SAMPLE_DIV_SHIFT 16
-#define SIRF_IOCLK_DIV_MASK 0xffff
-#define SIRF_SAMPLE_DIV_MASK 0x3f0000
-#define SIRF_BAUD_RATE_SUPPORT_NR 18
-
-/* USP SPEC */
-#define SIRFSOC_USP_ENDIAN_CTRL_LSBF BIT(4)
-#define SIRFSOC_USP_EN BIT(5)
-#define SIRFSOC_USP_MODE2_RXD_DELAY_OFFSET 0
-#define SIRFSOC_USP_MODE2_TXD_DELAY_OFFSET 8
-#define SIRFSOC_USP_MODE2_CLK_DIVISOR_MASK 0x3ff
-#define SIRFSOC_USP_MODE2_CLK_DIVISOR_OFFSET 21
-#define SIRFSOC_USP_TX_DATA_LEN_OFFSET 0
-#define SIRFSOC_USP_TX_SYNC_LEN_OFFSET 8
-#define SIRFSOC_USP_TX_FRAME_LEN_OFFSET 16
-#define SIRFSOC_USP_TX_SHIFTER_LEN_OFFSET 24
-#define SIRFSOC_USP_TX_CLK_DIVISOR_OFFSET 30
-#define SIRFSOC_USP_RX_DATA_LEN_OFFSET 0
-#define SIRFSOC_USP_RX_FRAME_LEN_OFFSET 8
-#define SIRFSOC_USP_RX_SHIFTER_LEN_OFFSET 16
-#define SIRFSOC_USP_RX_CLK_DIVISOR_OFFSET 24
-#define SIRFSOC_USP_ASYNC_DIV2_MASK 0x3f
-#define SIRFSOC_USP_ASYNC_DIV2_OFFSET 16
-#define SIRFSOC_USP_LOOP_BACK_CTRL BIT(2)
-#define SIRFSOC_USP_FRADDR_CLR_EN BIT(1)
-/* USP-UART Common */
-#define SIRFSOC_UART_RX_TIMEOUT(br, to) (((br) * (((to) + 999) / 1000)) / 1000)
-#define SIRFUART_RECV_TIMEOUT_VALUE(x) \
- (((x) > 0xFFFF) ? 0xFFFF : ((x) & 0xFFFF))
-#define SIRFUART_USP_RECV_TIMEOUT(x) (x & 0xFFFF)
-#define SIRFUART_UART_RECV_TIMEOUT(x) ((x & 0xFFFF) << 16)
-
-#define SIRFUART_FIFO_THD(port) (port->fifosize >> 1)
-#define SIRFUART_ERR_INT_STAT(unit_st, uart_type) \
- (uint_st->sirfsoc_rx_oflow | \
- uint_st->sirfsoc_frm_err | \
- uint_st->sirfsoc_rxd_brk | \
- ((uart_type != SIRF_REAL_UART) ? \
- 0 : uint_st->sirfsoc_parity_err))
-#define SIRFUART_RX_IO_INT_EN(uint_en, uart_type) \
- (uint_en->sirfsoc_rx_done_en |\
- uint_en->sirfsoc_rxfifo_thd_en |\
- uint_en->sirfsoc_rxfifo_full_en |\
- uint_en->sirfsoc_frm_err_en |\
- uint_en->sirfsoc_rx_oflow_en |\
- uint_en->sirfsoc_rxd_brk_en |\
- ((uart_type != SIRF_REAL_UART) ? \
- 0 : uint_en->sirfsoc_parity_err_en))
-#define SIRFUART_RX_IO_INT_ST(uint_st) \
- (uint_st->sirfsoc_rxfifo_thd |\
- uint_st->sirfsoc_rxfifo_full|\
- uint_st->sirfsoc_rx_done |\
- uint_st->sirfsoc_rx_timeout)
-#define SIRFUART_CTS_INT_ST(uint_st) (uint_st->sirfsoc_cts)
-#define SIRFUART_RX_DMA_INT_EN(uint_en, uart_type) \
- (uint_en->sirfsoc_frm_err_en |\
- uint_en->sirfsoc_rx_oflow_en |\
- uint_en->sirfsoc_rxd_brk_en |\
- ((uart_type != SIRF_REAL_UART) ? \
- 0 : uint_en->sirfsoc_parity_err_en))
-/* Generic Definitions */
-#define SIRFSOC_UART_NAME "ttySiRF"
-#define SIRFSOC_UART_MAJOR 0
-#define SIRFSOC_UART_MINOR 0
-#define SIRFUART_PORT_NAME "sirfsoc-uart"
-#define SIRFUART_MAP_SIZE 0x200
-#define SIRFSOC_UART_NR 11
-#define SIRFSOC_PORT_TYPE 0xa5
-
-/* Uart Common Use Macro*/
-#define SIRFSOC_RX_DMA_BUF_SIZE (1024 * 32)
-#define BYTES_TO_ALIGN(dma_addr) ((unsigned long)(dma_addr) & 0x3)
-/* Uart Fifo Level Chk */
-#define SIRFUART_TX_FIFO_SC_OFFSET 0
-#define SIRFUART_TX_FIFO_LC_OFFSET 10
-#define SIRFUART_TX_FIFO_HC_OFFSET 20
-#define SIRFUART_TX_FIFO_CHK_SC(line, value) ((((line) == 1) ? (value & 0x3) :\
- (value & 0x1f)) << SIRFUART_TX_FIFO_SC_OFFSET)
-#define SIRFUART_TX_FIFO_CHK_LC(line, value) ((((line) == 1) ? (value & 0x3) :\
- (value & 0x1f)) << SIRFUART_TX_FIFO_LC_OFFSET)
-#define SIRFUART_TX_FIFO_CHK_HC(line, value) ((((line) == 1) ? (value & 0x3) :\
- (value & 0x1f)) << SIRFUART_TX_FIFO_HC_OFFSET)
-
-#define SIRFUART_RX_FIFO_CHK_SC SIRFUART_TX_FIFO_CHK_SC
-#define SIRFUART_RX_FIFO_CHK_LC SIRFUART_TX_FIFO_CHK_LC
-#define SIRFUART_RX_FIFO_CHK_HC SIRFUART_TX_FIFO_CHK_HC
-#define SIRFUART_RX_FIFO_MASK 0x7f
-/* Indicate how many buffers used */
-
-/* For Fast Baud Rate Calculation */
-struct sirfsoc_baudrate_to_regv {
- unsigned int baud_rate;
- unsigned int reg_val;
-};
-
-enum sirfsoc_tx_state {
- TX_DMA_IDLE,
- TX_DMA_RUNNING,
- TX_DMA_PAUSE,
-};
-
-struct sirfsoc_rx_buffer {
- struct circ_buf xmit;
- dma_cookie_t cookie;
- struct dma_async_tx_descriptor *desc;
- dma_addr_t dma_addr;
-};
-
-struct sirfsoc_uart_port {
- bool hw_flow_ctrl;
- bool ms_enabled;
-
- struct uart_port port;
- struct clk *clk;
- /* for SiRFatlas7, there are SET/CLR for UART_INT_EN */
- bool is_atlas7;
- struct sirfsoc_uart_register *uart_reg;
- struct dma_chan *rx_dma_chan;
- struct dma_chan *tx_dma_chan;
- dma_addr_t tx_dma_addr;
- struct dma_async_tx_descriptor *tx_dma_desc;
- unsigned long transfer_size;
- enum sirfsoc_tx_state tx_dma_state;
- unsigned int cts_gpio;
- unsigned int rts_gpio;
-
- struct sirfsoc_rx_buffer rx_dma_items;
- struct hrtimer hrt;
- bool is_hrt_enabled;
- unsigned long rx_period_time;
- unsigned long rx_last_pos;
- unsigned long pio_fetch_cnt;
-};
-
-/* Register Access Control */
-#define portaddr(port, reg) ((port)->membase + (reg))
-#define rd_regl(port, reg) (__raw_readl(portaddr(port, reg)))
-#define wr_regl(port, reg, val) __raw_writel(val, portaddr(port, reg))
-
-/* UART Port Mask */
-#define SIRFUART_FIFOLEVEL_MASK(port) ((port->fifosize - 1) & 0xFFF)
-#define SIRFUART_FIFOFULL_MASK(port) (port->fifosize & 0xFFF)
-#define SIRFUART_FIFOEMPTY_MASK(port) ((port->fifosize & 0xFFF) << 1)