Merge 3.17-rc5 into usb-next

We need the USB fixes in there to build on top of in this branch for
3.18.

Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

3 files changed, 17 insertions, 6 deletions

diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c
index aa79e8749040..69aece31143a 100644
--- a/drivers/usb/host/xhci-hub.c
+++ b/drivers/usb/host/xhci-hub.c
@@ -468,7 +468,8 @@ static void xhci_hub_report_usb2_link_state(u32 *status, u32 status_reg)
 }
 
 /* Updates Link Status for super Speed port */
-static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
+static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci,
+		u32 *status, u32 status_reg)
 {
 	u32 pls = status_reg & PORT_PLS_MASK;
 
@@ -507,7 +508,8 @@ static void xhci_hub_report_usb3_link_state(u32 *status, u32 status_reg)
 		 * in which sometimes the port enters compliance mode
 		 * caused by a delay on the host-device negotiation.
 		 */
-		if (pls == USB_SS_PORT_LS_COMP_MOD)
+		if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
+				(pls == USB_SS_PORT_LS_COMP_MOD))
 			pls |= USB_PORT_STAT_CONNECTION;
 	}
 
@@ -666,7 +668,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd,
 	}
 	/* Update Port Link State */
 	if (hcd->speed == HCD_USB3) {
-		xhci_hub_report_usb3_link_state(&status, raw_port_status);
+		xhci_hub_report_usb3_link_state(xhci, &status, raw_port_status);
 		/*
 		 * Verify if all USB3 Ports Have entered U0 already.
 		 * Delete Compliance Mode Timer if so.
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index 8056d90690ee..8936211b161d 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -1812,6 +1812,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	if (xhci->lpm_command)
 		xhci_free_command(xhci, xhci->lpm_command);
+	xhci->lpm_command = NULL;
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -1819,7 +1820,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci_cleanup_command_queue(xhci);
 
 	num_ports = HCS_MAX_PORTS(xhci->hcs_params1);
-	for (i = 0; i < num_ports; i++) {
+	for (i = 0; i < num_ports && xhci->rh_bw; i++) {
 		struct xhci_interval_bw_table *bwt = &xhci->rh_bw[i].bw_table;
 		for (j = 0; j < XHCI_MAX_INTERVAL; j++) {
 			struct list_head *ep = &bwt->interval_bw[j].endpoints;
diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c
index c020b094fe7d..c4a8fca8ae93 100644
--- a/drivers/usb/host/xhci.c
+++ b/drivers/usb/host/xhci.c
@@ -3971,13 +3971,21 @@ static int __maybe_unused xhci_change_max_exit_latency(struct xhci_hcd *xhci,
 	int ret;
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	if (max_exit_latency == xhci->devs[udev->slot_id]->current_mel) {
+
+	virt_dev = xhci->devs[udev->slot_id];
+
+	/*
+	 * virt_dev might not exists yet if xHC resumed from hibernate (S4) and
+	 * xHC was re-initialized. Exit latency will be set later after
+	 * hub_port_finish_reset() is done and xhci->devs[] are re-allocated
+	 */
+
+	if (!virt_dev || max_exit_latency == virt_dev->current_mel) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		return 0;
 	}
 
 	/* Attempt to issue an Evaluate Context command to change the MEL. */
-	virt_dev = xhci->devs[udev->slot_id];
 	command = xhci->lpm_command;
 	ctrl_ctx = xhci_get_input_control_ctx(xhci, command->in_ctx);
 	if (!ctrl_ctx) {