summaryrefslogtreecommitdiff
path: root/drivers/video
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2021-09-07 12:50:01 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2021-09-07 12:50:01 -0700
commit2d7b4cdbb523cd11a978519f8e11895c27f05258 (patch)
tree10a795e399d04e580d455389981114ac1d51e901 /drivers/video
parent86406a9e733347f877a2bd5269ce7429d3748c6a (diff)
parent79fad92f2e596f5a8dd085788a24f540263ef887 (diff)
Merge tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight
Pull backlight updates from Lee Jones: "Fix-ups: - Improve bootloader/kernel device handover Bug Fixes: - Stabilise backlight in ktd253 driver" * tag 'backlight-next-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/backlight: backlight: pwm_bl: Improve bootloader/kernel device handover backlight: ktd253: Stabilize backlight
Diffstat (limited to 'drivers/video')
-rw-r--r--drivers/video/backlight/ktd253-backlight.c75
-rw-r--r--drivers/video/backlight/pwm_bl.c54
2 files changed, 83 insertions, 46 deletions
diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
index a7df5bcca9da..37aa5a669530 100644
--- a/drivers/video/backlight/ktd253-backlight.c
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -25,6 +25,7 @@
#define KTD253_T_LOW_NS (200 + 10) /* Additional 10ns as safety factor */
#define KTD253_T_HIGH_NS (200 + 10) /* Additional 10ns as safety factor */
+#define KTD253_T_OFF_CRIT_NS 100000 /* 100 us, now it doesn't look good */
#define KTD253_T_OFF_MS 3
struct ktd253_backlight {
@@ -34,13 +35,50 @@ struct ktd253_backlight {
u16 ratio;
};
+static void ktd253_backlight_set_max_ratio(struct ktd253_backlight *ktd253)
+{
+ gpiod_set_value_cansleep(ktd253->gpiod, 1);
+ ndelay(KTD253_T_HIGH_NS);
+ /* We always fall back to this when we power on */
+}
+
+static int ktd253_backlight_stepdown(struct ktd253_backlight *ktd253)
+{
+ /*
+ * These GPIO operations absolutely can NOT sleep so no _cansleep
+ * suffixes, and no using GPIO expanders on slow buses for this!
+ *
+ * The maximum number of cycles of the loop is 32 so the time taken
+ * should nominally be:
+ * (T_LOW_NS + T_HIGH_NS + loop_time) * 32
+ *
+ * Architectures do not always support ndelay() and we will get a few us
+ * instead. If we get to a critical time limit an interrupt has likely
+ * occured in the low part of the loop and we need to restart from the
+ * top so we have the backlight in a known state.
+ */
+ u64 ns;
+
+ ns = ktime_get_ns();
+ gpiod_set_value(ktd253->gpiod, 0);
+ ndelay(KTD253_T_LOW_NS);
+ gpiod_set_value(ktd253->gpiod, 1);
+ ns = ktime_get_ns() - ns;
+ if (ns >= KTD253_T_OFF_CRIT_NS) {
+ dev_err(ktd253->dev, "PCM on backlight took too long (%llu ns)\n", ns);
+ return -EAGAIN;
+ }
+ ndelay(KTD253_T_HIGH_NS);
+ return 0;
+}
+
static int ktd253_backlight_update_status(struct backlight_device *bl)
{
struct ktd253_backlight *ktd253 = bl_get_data(bl);
int brightness = backlight_get_brightness(bl);
u16 target_ratio;
u16 current_ratio = ktd253->ratio;
- unsigned long flags;
+ int ret;
dev_dbg(ktd253->dev, "new brightness/ratio: %d/32\n", brightness);
@@ -62,37 +100,34 @@ static int ktd253_backlight_update_status(struct backlight_device *bl)
}
if (current_ratio == 0) {
- gpiod_set_value_cansleep(ktd253->gpiod, 1);
- ndelay(KTD253_T_HIGH_NS);
- /* We always fall back to this when we power on */
+ ktd253_backlight_set_max_ratio(ktd253);
current_ratio = KTD253_MAX_RATIO;
}
- /*
- * WARNING:
- * The loop to set the correct current level is performed
- * with interrupts disabled as it is timing critical.
- * The maximum number of cycles of the loop is 32
- * so the time taken will be (T_LOW_NS + T_HIGH_NS + loop_time) * 32,
- */
- local_irq_save(flags);
while (current_ratio != target_ratio) {
/*
* These GPIO operations absolutely can NOT sleep so no
* _cansleep suffixes, and no using GPIO expanders on
* slow buses for this!
*/
- gpiod_set_value(ktd253->gpiod, 0);
- ndelay(KTD253_T_LOW_NS);
- gpiod_set_value(ktd253->gpiod, 1);
- ndelay(KTD253_T_HIGH_NS);
- /* After 1/32 we loop back to 32/32 */
- if (current_ratio == KTD253_MIN_RATIO)
+ ret = ktd253_backlight_stepdown(ktd253);
+ if (ret == -EAGAIN) {
+ /*
+ * Something disturbed the backlight setting code when
+ * running so we need to bring the PWM back to a known
+ * state. This shouldn't happen too much.
+ */
+ gpiod_set_value_cansleep(ktd253->gpiod, 0);
+ msleep(KTD253_T_OFF_MS);
+ ktd253_backlight_set_max_ratio(ktd253);
+ current_ratio = KTD253_MAX_RATIO;
+ } else if (current_ratio == KTD253_MIN_RATIO) {
+ /* After 1/32 we loop back to 32/32 */
current_ratio = KTD253_MAX_RATIO;
- else
+ } else {
current_ratio--;
+ }
}
- local_irq_restore(flags);
ktd253->ratio = current_ratio;
dev_dbg(ktd253->dev, "new ratio set to %d/32\n", target_ratio);
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index e48fded3e414..8d8959a70e44 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -409,6 +409,33 @@ static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data)
static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
{
struct device_node *node = pb->dev->of_node;
+ bool active = true;
+
+ /*
+ * If the enable GPIO is present, observable (either as input
+ * or output) and off then the backlight is not currently active.
+ * */
+ if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
+ active = false;
+
+ if (!regulator_is_enabled(pb->power_supply))
+ active = false;
+
+ if (!pwm_is_enabled(pb->pwm))
+ active = false;
+
+ /*
+ * Synchronize the enable_gpio with the observed state of the
+ * hardware.
+ */
+ if (pb->enable_gpio)
+ gpiod_direction_output(pb->enable_gpio, active);
+
+ /*
+ * Do not change pb->enabled here! pb->enabled essentially
+ * tells us if we own one of the regulator's use counts and
+ * right now we do not.
+ */
/* Not booted with device tree or no phandle link to the node */
if (!node || !node->phandle)
@@ -420,20 +447,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
* assume that another driver will enable the backlight at the
* appropriate time. Therefore, if it is disabled, keep it so.
*/
-
- /* if the enable GPIO is disabled, do not enable the backlight */
- if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
- return FB_BLANK_POWERDOWN;
-
- /* The regulator is disabled, do not enable the backlight */
- if (!regulator_is_enabled(pb->power_supply))
- return FB_BLANK_POWERDOWN;
-
- /* The PWM is disabled, keep it like this */
- if (!pwm_is_enabled(pb->pwm))
- return FB_BLANK_POWERDOWN;
-
- return FB_BLANK_UNBLANK;
+ return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN;
}
static int pwm_backlight_probe(struct platform_device *pdev)
@@ -486,18 +500,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
goto err_alloc;
}
- /*
- * If the GPIO is not known to be already configured as output, that
- * is, if gpiod_get_direction returns either 1 or -EINVAL, change the
- * direction to output and set the GPIO as active.
- * Do not force the GPIO to active when it was already output as it
- * could cause backlight flickering or we would enable the backlight too
- * early. Leave the decision of the initial backlight state for later.
- */
- if (pb->enable_gpio &&
- gpiod_get_direction(pb->enable_gpio) != 0)
- gpiod_direction_output(pb->enable_gpio, 1);
-
pb->power_supply = devm_regulator_get(&pdev->dev, "power");
if (IS_ERR(pb->power_supply)) {
ret = PTR_ERR(pb->power_supply);