Merge remote-tracking branch 'scsi/master'

Conflicts:
	drivers/scsi/libsas/sas_ata.c
	drivers/scsi/libsas/sas_scsi_host.c

113 files changed, 5022 insertions, 2409 deletions

diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 7b2fc98e2f2b..8db008de5392 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -532,6 +532,29 @@ iscsi_iser_conn_get_stats(struct iscsi_cls_conn *cls_conn, struct iscsi_stats *s
 	stats->custom[3].value = conn->fmr_unalign_cnt;
 }
 
+static int iscsi_iser_get_ep_param(struct iscsi_endpoint *ep,
+				   enum iscsi_param param, char *buf)
+{
+	struct iser_conn *ib_conn = ep->dd_data;
+	int len;
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_PORT:
+	case ISCSI_PARAM_CONN_ADDRESS:
+		if (!ib_conn || !ib_conn->cma_id)
+			return -ENOTCONN;
+
+		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+					&ib_conn->cma_id->route.addr.dst_addr,
+					param, buf);
+		break;
+	default:
+		return -ENOSYS;
+	}
+
+	return len;
+}
+
 static struct iscsi_endpoint *
 iscsi_iser_ep_connect(struct Scsi_Host *shost, struct sockaddr *dst_addr,
 		      int non_blocking)
@@ -637,6 +660,8 @@ static struct iscsi_transport iscsi_iser_transport = {
 				  ISCSI_MAX_BURST |
 				  ISCSI_PDU_INORDER_EN |
 				  ISCSI_DATASEQ_INORDER_EN |
+				  ISCSI_CONN_PORT |
+				  ISCSI_CONN_ADDRESS |
 				  ISCSI_EXP_STATSN |
 				  ISCSI_PERSISTENT_PORT |
 				  ISCSI_PERSISTENT_ADDRESS |
@@ -659,6 +684,7 @@ static struct iscsi_transport iscsi_iser_transport = {
 	.destroy_conn           = iscsi_iser_conn_destroy,
 	.set_param              = iscsi_iser_set_param,
 	.get_conn_param		= iscsi_conn_get_param,
+	.get_ep_param		= iscsi_iser_get_ep_param,
 	.get_session_param	= iscsi_session_get_param,
 	.start_conn             = iscsi_iser_conn_start,
 	.stop_conn              = iscsi_iser_conn_stop,
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index b82d28819e2a..4b0b63c290a6 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1283,24 +1283,22 @@ static int do_end_io(struct multipath *m, struct request *clone,
 	if (!error && !clone->errors)
 		return 0;	/* I/O complete */
 
-	if (error == -EOPNOTSUPP)
-		return error;
-
-	if (clone->cmd_flags & REQ_DISCARD)
-		/*
-		 * Pass all discard request failures up.
-		 * FIXME: only fail_path if the discard failed due to a
-		 * transport problem.  This requires precise understanding
-		 * of the underlying failure (e.g. the SCSI sense).
-		 */
+	if (error == -EOPNOTSUPP || error == -EREMOTEIO)
 		return error;
 
 	if (mpio->pgpath)
 		fail_path(mpio->pgpath);
 
 	spin_lock_irqsave(&m->lock, flags);
-	if (!m->nr_valid_paths && !m->queue_if_no_path && !__must_push_back(m))
-		r = -EIO;
+	if (!m->nr_valid_paths) {
+		if (!m->queue_if_no_path) {
+			if (!__must_push_back(m))
+				r = -EIO;
+		} else {
+			if (error == -EBADE)
+				r = error;
+		}
+	}
 	spin_unlock_irqrestore(&m->lock, flags);
 
 	return r;
diff --git a/drivers/message/fusion/lsi/mpi_cnfg.h b/drivers/message/fusion/lsi/mpi_cnfg.h
index 013c7d881948..22027e7946f7 100644
--- a/drivers/message/fusion/lsi/mpi_cnfg.h
+++ b/drivers/message/fusion/lsi/mpi_cnfg.h
@@ -2593,6 +2593,7 @@ typedef struct _CONFIG_PAGE_SAS_IO_UNIT_0
 #define MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE              (0x03)
 #define MPI_SAS_IOUNIT0_RATE_1_5                            (0x08)
 #define MPI_SAS_IOUNIT0_RATE_3_0                            (0x09)
+#define MPI_SAS_IOUNIT0_RATE_6_0                            (0x0A)
 
 /* see mpi_sas.h for values for SAS IO Unit Page 0 ControllerPhyDeviceInfo values */
 
diff --git a/drivers/message/fusion/lsi/mpi_ioc.h b/drivers/message/fusion/lsi/mpi_ioc.h
index 8faa4fab7b89..fd6222882a0e 100644
--- a/drivers/message/fusion/lsi/mpi_ioc.h
+++ b/drivers/message/fusion/lsi/mpi_ioc.h
@@ -841,6 +841,7 @@ typedef struct _EVENT_DATA_SAS_PHY_LINK_STATUS
 #define MPI_EVENT_SAS_PLS_LR_RATE_SATA_OOB_COMPLETE         (0x03)
 #define MPI_EVENT_SAS_PLS_LR_RATE_1_5                       (0x08)
 #define MPI_EVENT_SAS_PLS_LR_RATE_3_0                       (0x09)
+#define MPI_EVENT_SAS_PLS_LR_RATE_6_0                       (0x0A)
 
 /* SAS Discovery Event data */
 
diff --git a/drivers/message/fusion/mptbase.c b/drivers/message/fusion/mptbase.c
index 3358c0af3466..ec8080c98081 100644
--- a/drivers/message/fusion/mptbase.c
+++ b/drivers/message/fusion/mptbase.c
@@ -7418,7 +7418,12 @@ mpt_display_event_info(MPT_ADAPTER *ioc, EventNotificationReply_t *pEventReply)
 		case MPI_EVENT_SAS_PLS_LR_RATE_3_0:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,
 			   "SAS PHY Link Status: Phy=%d:"
-			   " Rate 3.0 Gpbs",PhyNumber);
+			   " Rate 3.0 Gbps", PhyNumber);
+			break;
+		case MPI_EVENT_SAS_PLS_LR_RATE_6_0:
+			snprintf(evStr, EVENT_DESCR_STR_SZ,
+			   "SAS PHY Link Status: Phy=%d:"
+			   " Rate 6.0 Gbps", PhyNumber);
 			break;
 		default:
 			snprintf(evStr, EVENT_DESCR_STR_SZ,
diff --git a/drivers/message/fusion/mptctl.c b/drivers/message/fusion/mptctl.c
index e8deb8ed0499..878bda0cce70 100644
--- a/drivers/message/fusion/mptctl.c
+++ b/drivers/message/fusion/mptctl.c
@@ -1314,8 +1314,10 @@ mptctl_getiocinfo (unsigned long arg, unsigned int data_size)
 	else
 		karg->adapterType = MPT_IOCTL_INTERFACE_SCSI;
 
-	if (karg->hdr.port > 1)
+	if (karg->hdr.port > 1) {
+		kfree(karg);
 		return -EINVAL;
+	}
 	port = karg->hdr.port;
 
 	karg->port = port;
diff --git a/drivers/message/fusion/mptsas.c b/drivers/message/fusion/mptsas.c
index 8aefb1829fcd..f5a14afad2cd 100644
--- a/drivers/message/fusion/mptsas.c
+++ b/drivers/message/fusion/mptsas.c
@@ -1973,7 +1973,6 @@ static struct scsi_host_template mptsas_driver_template = {
 	.change_queue_depth 		= mptscsih_change_queue_depth,
 	.eh_abort_handler		= mptscsih_abort,
 	.eh_device_reset_handler	= mptscsih_dev_reset,
-	.eh_bus_reset_handler		= mptscsih_bus_reset,
 	.eh_host_reset_handler		= mptscsih_host_reset,
 	.bios_param			= mptscsih_bios_param,
 	.can_queue			= MPT_SAS_CAN_QUEUE,
@@ -3063,6 +3062,9 @@ static int mptsas_probe_one_phy(struct device *dev,
 	case MPI_SAS_IOUNIT0_RATE_3_0:
 		phy->negotiated_linkrate = SAS_LINK_RATE_3_0_GBPS;
 		break;
+	case MPI_SAS_IOUNIT0_RATE_6_0:
+		phy->negotiated_linkrate = SAS_LINK_RATE_6_0_GBPS;
+		break;
 	case MPI_SAS_IOUNIT0_RATE_SATA_OOB_COMPLETE:
 	case MPI_SAS_IOUNIT0_RATE_UNKNOWN:
 	default:
@@ -3691,7 +3693,8 @@ mptsas_send_link_status_event(struct fw_event_work *fw_event)
 	}
 
 	if (link_rate == MPI_SAS_IOUNIT0_RATE_1_5 ||
-	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0) {
+	    link_rate == MPI_SAS_IOUNIT0_RATE_3_0 ||
+	    link_rate == MPI_SAS_IOUNIT0_RATE_6_0) {
 
 		if (!port_info) {
 			if (ioc->old_sas_discovery_protocal) {
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index d584d32c747d..85ca5e8db6a7 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -145,13 +145,6 @@ static struct {
 	{ "Broadcom NetXtreme II BCM57712E XGb" }
 };
 
-#ifndef PCI_DEVICE_ID_NX2_57712
-#define PCI_DEVICE_ID_NX2_57712		0x1662
-#endif
-#ifndef PCI_DEVICE_ID_NX2_57712E
-#define PCI_DEVICE_ID_NX2_57712E	0x1663
-#endif
-
 static DEFINE_PCI_DEVICE_TABLE(bnx2x_pci_tbl) = {
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57710), BCM57710 },
 	{ PCI_VDEVICE(BROADCOM, PCI_DEVICE_ID_NX2_57711), BCM57711 },
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 51c666fb67a4..645b0fcbb370 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -122,36 +122,21 @@ static int __init zfcp_module_init(void)
 {
 	int retval = -ENOMEM;
 
-	zfcp_data.gpn_ft_cache = zfcp_cache_hw_align("zfcp_gpn",
-					sizeof(struct zfcp_fc_gpn_ft_req));
-	if (!zfcp_data.gpn_ft_cache)
-		goto out;
-
-	zfcp_data.qtcb_cache = zfcp_cache_hw_align("zfcp_qtcb",
-					sizeof(struct fsf_qtcb));
-	if (!zfcp_data.qtcb_cache)
+	zfcp_fsf_qtcb_cache = zfcp_cache_hw_align("zfcp_fsf_qtcb",
+						  sizeof(struct fsf_qtcb));
+	if (!zfcp_fsf_qtcb_cache)
 		goto out_qtcb_cache;
 
-	zfcp_data.sr_buffer_cache = zfcp_cache_hw_align("zfcp_sr",
-					sizeof(struct fsf_status_read_buffer));
-	if (!zfcp_data.sr_buffer_cache)
-		goto out_sr_cache;
+	zfcp_fc_req_cache = zfcp_cache_hw_align("zfcp_fc_req",
+						sizeof(struct zfcp_fc_req));
+	if (!zfcp_fc_req_cache)
+		goto out_fc_cache;
 
-	zfcp_data.gid_pn_cache = zfcp_cache_hw_align("zfcp_gid",
-					sizeof(struct zfcp_fc_gid_pn));
-	if (!zfcp_data.gid_pn_cache)
-		goto out_gid_cache;
-
-	zfcp_data.adisc_cache = zfcp_cache_hw_align("zfcp_adisc",
-					sizeof(struct zfcp_fc_els_adisc));
-	if (!zfcp_data.adisc_cache)
-		goto out_adisc_cache;
-
-	zfcp_data.scsi_transport_template =
+	zfcp_scsi_transport_template =
 		fc_attach_transport(&zfcp_transport_functions);
-	if (!zfcp_data.scsi_transport_template)
+	if (!zfcp_scsi_transport_template)
 		goto out_transport;
-	scsi_transport_reserve_device(zfcp_data.scsi_transport_template,
+	scsi_transport_reserve_device(zfcp_scsi_transport_template,
 				      sizeof(struct zfcp_scsi_dev));
 
 
@@ -175,18 +160,12 @@ static int __init zfcp_module_init(void)
 out_ccw_register:
 	misc_deregister(&zfcp_cfdc_misc);
 out_misc:
-	fc_release_transport(zfcp_data.scsi_transport_template);
+	fc_release_transport(zfcp_scsi_transport_template);
 out_transport:
-	kmem_cache_destroy(zfcp_data.adisc_cache);
-out_adisc_cache:
-	kmem_cache_destroy(zfcp_data.gid_pn_cache);
-out_gid_cache:
-	kmem_cache_destroy(zfcp_data.sr_buffer_cache);
-out_sr_cache:
-	kmem_cache_destroy(zfcp_data.qtcb_cache);
+	kmem_cache_destroy(zfcp_fc_req_cache);
+out_fc_cache:
+	kmem_cache_destroy(zfcp_fsf_qtcb_cache);
 out_qtcb_cache:
-	kmem_cache_destroy(zfcp_data.gpn_ft_cache);
-out:
 	return retval;
 }
 
@@ -196,12 +175,9 @@ static void __exit zfcp_module_exit(void)
 {
 	ccw_driver_unregister(&zfcp_ccw_driver);
 	misc_deregister(&zfcp_cfdc_misc);
-	fc_release_transport(zfcp_data.scsi_transport_template);
-	kmem_cache_destroy(zfcp_data.adisc_cache);
-	kmem_cache_destroy(zfcp_data.gid_pn_cache);
-	kmem_cache_destroy(zfcp_data.sr_buffer_cache);
-	kmem_cache_destroy(zfcp_data.qtcb_cache);
-	kmem_cache_destroy(zfcp_data.gpn_ft_cache);
+	fc_release_transport(zfcp_scsi_transport_template);
+	kmem_cache_destroy(zfcp_fc_req_cache);
+	kmem_cache_destroy(zfcp_fsf_qtcb_cache);
 }
 
 module_exit(zfcp_module_exit);
@@ -260,18 +236,18 @@ static int zfcp_allocate_low_mem_buffers(struct zfcp_adapter *adapter)
 		return -ENOMEM;
 
 	adapter->pool.qtcb_pool =
-		mempool_create_slab_pool(4, zfcp_data.qtcb_cache);
+		mempool_create_slab_pool(4, zfcp_fsf_qtcb_cache);
 	if (!adapter->pool.qtcb_pool)
 		return -ENOMEM;
 
-	adapter->pool.status_read_data =
-		mempool_create_slab_pool(FSF_STATUS_READS_RECOM,
-					 zfcp_data.sr_buffer_cache);
-	if (!adapter->pool.status_read_data)
+	BUILD_BUG_ON(sizeof(struct fsf_status_read_buffer) > PAGE_SIZE);
+	adapter->pool.sr_data =
+		mempool_create_page_pool(FSF_STATUS_READS_RECOM, 0);
+	if (!adapter->pool.sr_data)
 		return -ENOMEM;
 
 	adapter->pool.gid_pn =
-		mempool_create_slab_pool(1, zfcp_data.gid_pn_cache);
+		mempool_create_slab_pool(1, zfcp_fc_req_cache);
 	if (!adapter->pool.gid_pn)
 		return -ENOMEM;
 
@@ -290,8 +266,8 @@ static void zfcp_free_low_mem_buffers(struct zfcp_adapter *adapter)
 		mempool_destroy(adapter->pool.qtcb_pool);
 	if (adapter->pool.status_read_req)
 		mempool_destroy(adapter->pool.status_read_req);
-	if (adapter->pool.status_read_data)
-		mempool_destroy(adapter->pool.status_read_data);
+	if (adapter->pool.sr_data)
+		mempool_destroy(adapter->pool.sr_data);
 	if (adapter->pool.gid_pn)
 		mempool_destroy(adapter->pool.gid_pn);
 }
@@ -386,6 +362,7 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 
 	INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
 	INIT_WORK(&adapter->scan_work, zfcp_fc_scan_ports);
+	INIT_WORK(&adapter->ns_up_work, zfcp_fc_sym_name_update);
 
 	if (zfcp_qdio_setup(adapter))
 		goto failed;
@@ -437,7 +414,7 @@ struct zfcp_adapter *zfcp_adapter_enqueue(struct ccw_device *ccw_device)
 	adapter->dma_parms.max_segment_size = ZFCP_QDIO_SBALE_LEN;
 	adapter->ccw_device->dev.dma_parms = &adapter->dma_parms;
 
-	if (!zfcp_adapter_scsi_register(adapter))
+	if (!zfcp_scsi_adapter_register(adapter))
 		return adapter;
 
 failed:
@@ -451,10 +428,11 @@ void zfcp_adapter_unregister(struct zfcp_adapter *adapter)
 
 	cancel_work_sync(&adapter->scan_work);
 	cancel_work_sync(&adapter->stat_work);
+	cancel_work_sync(&adapter->ns_up_work);
 	zfcp_destroy_adapter_work_queue(adapter);
 
 	zfcp_fc_wka_ports_force_offline(adapter->gs);
-	zfcp_adapter_scsi_unregister(adapter);
+	zfcp_scsi_adapter_unregister(adapter);
 	sysfs_remove_group(&cdev->dev.kobj, &zfcp_sysfs_adapter_attrs);
 
 	zfcp_erp_thread_kill(adapter);
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index 9ae1d0a6f627..527ba48eea57 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -89,7 +89,6 @@ struct zfcp_reqlist;
 #define ZFCP_STATUS_LUN_READONLY		0x00000008
 
 /* FSF request status (this does not have a common part) */
-#define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT	0x00000002
 #define ZFCP_STATUS_FSFREQ_ERROR		0x00000008
 #define ZFCP_STATUS_FSFREQ_CLEANUP		0x00000010
 #define ZFCP_STATUS_FSFREQ_ABORTSUCCEEDED	0x00000040
@@ -108,7 +107,7 @@ struct zfcp_adapter_mempool {
 	mempool_t *scsi_req;
 	mempool_t *scsi_abort;
 	mempool_t *status_read_req;
-	mempool_t *status_read_data;
+	mempool_t *sr_data;
 	mempool_t *gid_pn;
 	mempool_t *qtcb_pool;
 };
@@ -190,6 +189,7 @@ struct zfcp_adapter {
 	struct fsf_qtcb_bottom_port *stats_reset_data;
 	unsigned long		stats_reset;
 	struct work_struct	scan_work;
+	struct work_struct	ns_up_work;
 	struct service_level	service_level;
 	struct workqueue_struct	*work_queue;
 	struct device_dma_parameters dma_parms;
@@ -314,15 +314,4 @@ struct zfcp_fsf_req {
 	void			(*handler)(struct zfcp_fsf_req *);
 };
 
-/* driver data */
-struct zfcp_data {
-	struct scsi_host_template scsi_host_template;
-	struct scsi_transport_template *scsi_transport_template;
-	struct kmem_cache	*gpn_ft_cache;
-	struct kmem_cache	*qtcb_cache;
-	struct kmem_cache	*sr_buffer_cache;
-	struct kmem_cache	*gid_pn_cache;
-	struct kmem_cache	*adisc_cache;
-};
-
 #endif /* ZFCP_DEF_H */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index e003e306f870..e1b4f800e226 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -732,7 +732,7 @@ static int zfcp_erp_adapter_strategy_open_fsf(struct zfcp_erp_action *act)
 	if (zfcp_erp_adapter_strategy_open_fsf_xport(act) == ZFCP_ERP_FAILED)
 		return ZFCP_ERP_FAILED;
 
-	if (mempool_resize(act->adapter->pool.status_read_data,
+	if (mempool_resize(act->adapter->pool.sr_data,
 			   act->adapter->stat_read_buf_num, GFP_KERNEL))
 		return ZFCP_ERP_FAILED;
 
@@ -1231,8 +1231,10 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
 		if (result == ZFCP_ERP_SUCCEEDED) {
 			register_service_level(&adapter->service_level);
 			queue_work(adapter->work_queue, &adapter->scan_work);
+			queue_work(adapter->work_queue, &adapter->ns_up_work);
 		} else
 			unregister_service_level(&adapter->service_level);
+
 		kref_put(&adapter->ref, zfcp_adapter_release);
 		break;
 	}
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index 6e325284fbe7..03627cfd81cd 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -80,6 +80,7 @@ extern void zfcp_erp_notify(struct zfcp_erp_action *, unsigned long);
 extern void zfcp_erp_timeout_handler(unsigned long);
 
 /* zfcp_fc.c */
+extern struct kmem_cache *zfcp_fc_req_cache;
 extern void zfcp_fc_enqueue_event(struct zfcp_adapter *,
 				enum fc_host_event_code event_code, u32);
 extern void zfcp_fc_post_event(struct work_struct *);
@@ -95,8 +96,10 @@ extern int zfcp_fc_gs_setup(struct zfcp_adapter *);
 extern void zfcp_fc_gs_destroy(struct zfcp_adapter *);
 extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
 extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *);
+extern void zfcp_fc_sym_name_update(struct work_struct *);
 
 /* zfcp_fsf.c */
+extern struct kmem_cache *zfcp_fsf_qtcb_cache;
 extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
 extern int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *);
 extern int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *);
@@ -139,9 +142,9 @@ extern struct zfcp_fsf_req *zfcp_fsf_get_req(struct zfcp_qdio *,
 					     struct qdio_buffer *);
 
 /* zfcp_scsi.c */
-extern struct zfcp_data zfcp_data;
-extern int zfcp_adapter_scsi_register(struct zfcp_adapter *);
-extern void zfcp_adapter_scsi_unregister(struct zfcp_adapter *);
+extern struct scsi_transport_template *zfcp_scsi_transport_template;
+extern int zfcp_scsi_adapter_register(struct zfcp_adapter *);
+extern void zfcp_scsi_adapter_unregister(struct zfcp_adapter *);
 extern struct fc_function_template zfcp_transport_functions;
 extern void zfcp_scsi_rport_work(struct work_struct *);
 extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index 30cf91a787a3..297e6b71ce9c 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -11,11 +11,14 @@
 
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/utsname.h>
 #include <scsi/fc/fc_els.h>
 #include <scsi/libfc.h>
 #include "zfcp_ext.h"
 #include "zfcp_fc.h"
 
+struct kmem_cache *zfcp_fc_req_cache;
+
 static u32 zfcp_fc_rscn_range_mask[] = {
 	[ELS_ADDR_FMT_PORT]		= 0xFFFFFF,
 	[ELS_ADDR_FMT_AREA]		= 0xFFFF00,
@@ -260,24 +263,18 @@ void zfcp_fc_incoming_els(struct zfcp_fsf_req *fsf_req)
 		zfcp_fc_incoming_rscn(fsf_req);
 }
 
-static void zfcp_fc_ns_gid_pn_eval(void *data)
+static void zfcp_fc_ns_gid_pn_eval(struct zfcp_fc_req *fc_req)
 {
-	struct zfcp_fc_gid_pn *gid_pn = data;
-	struct zfcp_fsf_ct_els *ct = &gid_pn->ct;
-	struct zfcp_fc_gid_pn_req *gid_pn_req = sg_virt(ct->req);
-	struct zfcp_fc_gid_pn_resp *gid_pn_resp = sg_virt(ct->resp);
-	struct zfcp_port *port = gid_pn->port;
+	struct zfcp_fsf_ct_els *ct_els = &fc_req->ct_els;
+	struct zfcp_fc_gid_pn_rsp *gid_pn_rsp = &fc_req->u.gid_pn.rsp;
 
-	if (ct->status)
+	if (ct_els->status)
 		return;
-	if (gid_pn_resp->ct_hdr.ct_cmd != FC_FS_ACC)
+	if (gid_pn_rsp->ct_hdr.ct_cmd != FC_FS_ACC)
 		return;
 
-	/* paranoia */
-	if (gid_pn_req->gid_pn.fn_wwpn != port->wwpn)
-		return;
 	/* looks like a valid d_id */
-	port->d_id = ntoh24(gid_pn_resp->gid_pn.fp_fid);
+	ct_els->port->d_id = ntoh24(gid_pn_rsp->gid_pn.fp_fid);
 }
 
 static void zfcp_fc_complete(void *data)
@@ -285,69 +282,73 @@ static void zfcp_fc_complete(void *data)
 	complete(data);
 }
 
+static void zfcp_fc_ct_ns_init(struct fc_ct_hdr *ct_hdr, u16 cmd, u16 mr_size)
+{
+	ct_hdr->ct_rev = FC_CT_REV;
+	ct_hdr->ct_fs_type = FC_FST_DIR;
+	ct_hdr->ct_fs_subtype = FC_NS_SUBTYPE;
+	ct_hdr->ct_cmd = cmd;
+	ct_hdr->ct_mr_size = mr_size / 4;
+}
+
 static int zfcp_fc_ns_gid_pn_request(struct zfcp_port *port,
-				     struct zfcp_fc_gid_pn *gid_pn)
+				     struct zfcp_fc_req *fc_req)
 {
 	struct zfcp_adapter *adapter = port->adapter;
 	DECLARE_COMPLETION_ONSTACK(completion);
+	struct zfcp_fc_gid_pn_req *gid_pn_req = &fc_req->u.gid_pn.req;
+	struct zfcp_fc_gid_pn_rsp *gid_pn_rsp = &fc_req->u.gid_pn.rsp;
 	int ret;
 
 	/* setup parameters for send generic command */
-	gid_pn->port = port;
-	gid_pn->ct.handler = zfcp_fc_complete;
-	gid_pn->ct.handler_data = &completion;
-	gid_pn->ct.req = &gid_pn->sg_req;
-	gid_pn->ct.resp = &gid_pn->sg_resp;
-	sg_init_one(&gid_pn->sg_req, &gid_pn->gid_pn_req,
-		    sizeof(struct zfcp_fc_gid_pn_req));
-	sg_init_one(&gid_pn->sg_resp, &gid_pn->gid_pn_resp,
-		    sizeof(struct zfcp_fc_gid_pn_resp));
-
-	/* setup nameserver request */
-	gid_pn->gid_pn_req.ct_hdr.ct_rev = FC_CT_REV;
-	gid_pn->gid_pn_req.ct_hdr.ct_fs_type = FC_FST_DIR;
-	gid_pn->gid_pn_req.ct_hdr.ct_fs_subtype = FC_NS_SUBTYPE;
-	gid_pn->gid_pn_req.ct_hdr.ct_options = 0;
-	gid_pn->gid_pn_req.ct_hdr.ct_cmd = FC_NS_GID_PN;
-	gid_pn->gid_pn_req.ct_hdr.ct_mr_size = ZFCP_FC_CT_SIZE_PAGE / 4;
-	gid_pn->gid_pn_req.gid_pn.fn_wwpn = port->wwpn;
-
-	ret = zfcp_fsf_send_ct(&adapter->gs->ds, &gid_pn->ct,
+	fc_req->ct_els.port = port;
+	fc_req->ct_els.handler = zfcp_fc_complete;
+	fc_req->ct_els.handler_data = &completion;
+	fc_req->ct_els.req = &fc_req->sg_req;
+	fc_req->ct_els.resp = &fc_req->sg_rsp;
+	sg_init_one(&fc_req->sg_req, gid_pn_req, sizeof(*gid_pn_req));
+	sg_init_one(&fc_req->sg_rsp, gid_pn_rsp, sizeof(*gid_pn_rsp));
+
+	zfcp_fc_ct_ns_init(&gid_pn_req->ct_hdr,
+			   FC_NS_GID_PN, ZFCP_FC_CT_SIZE_PAGE);
+	gid_pn_req->gid_pn.fn_wwpn = port->wwpn;
+
+	ret = zfcp_fsf_send_ct(&adapter->gs->ds, &fc_req->ct_els,
 			       adapter->pool.gid_pn_req,
 			       ZFCP_FC_CTELS_TMO);
 	if (!ret) {
 		wait_for_completion(&completion);
-		zfcp_fc_ns_gid_pn_eval(gid_pn);
+		zfcp_fc_ns_gid_pn_eval(fc_req);
 	}
 	return ret;
 }
 
 /**
- * zfcp_fc_ns_gid_pn_request - initiate GID_PN nameserver request
+ * zfcp_fc_ns_gid_pn - initiate GID_PN nameserver request
  * @port: port where GID_PN request is needed
  * return: -ENOMEM on error, 0 otherwise
  */
 static int zfcp_fc_ns_gid_pn(struct zfcp_port *port)
 {
 	int ret;
-	struct zfcp_fc_gid_pn *gid_pn;
+	struct zfcp_fc_req *fc_req;
 	struct zfcp_adapter *adapter = port->adapter;
 
-	gid_pn = mempool_alloc(adapter->pool.gid_pn, GFP_ATOMIC);
-	if (!gid_pn)
+	fc_req = mempool_alloc(adapter->pool.gid_pn, GFP_ATOMIC);
+	if (!fc_req)
 		return -ENOMEM;
 
-	memset(gid_pn, 0, sizeof(*gid_pn));
+	memset(fc_req, 0, sizeof(*fc_req));
 
 	ret = zfcp_fc_wka_port_get(&adapter->gs->ds);
 	if (ret)
 		goto out;
 
-	ret = zfcp_fc_ns_gid_pn_request(port, gid_pn);
+	ret = zfcp_fc_ns_gid_pn_request(port, fc_req);
 
 	zfcp_fc_wka_port_put(&adapter->gs->ds);
 out:
-	mempool_free(gid_pn, adapter->pool.gid_pn);
+	mempool_free(fc_req, adapter->pool.gid_pn);
 	return ret;
 }
 
@@ -419,11 +420,11 @@ void zfcp_fc_plogi_evaluate(struct zfcp_port *port, struct fc_els_flogi *plogi)
 
 static void zfcp_fc_adisc_handler(void *data)
 {
-	struct zfcp_fc_els_adisc *adisc = data;
-	struct zfcp_port *port = adisc->els.port;
-	struct fc_els_adisc *adisc_resp = &adisc->adisc_resp;
+	struct zfcp_fc_req *fc_req = data;
+	struct zfcp_port *port = fc_req->ct_els.port;
+	struct fc_els_adisc *adisc_resp = &fc_req->u.adisc.rsp;
 
-	if (adisc->els.status) {
+	if (fc_req->ct_els.status) {
 		/* request rejected or timed out */
 		zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
 					    "fcadh_1");
@@ -445,42 +446,42 @@ static void zfcp_fc_adisc_handler(void *data)
  out:
 	atomic_clear_mask(ZFCP_STATUS_PORT_LINK_TEST, &port->status);
 	put_device(&port->dev);
-	kmem_cache_free(zfcp_data.adisc_cache, adisc);
+	kmem_cache_free(zfcp_fc_req_cache, fc_req);
 }
 
 static int zfcp_fc_adisc(struct zfcp_port *port)
 {
-	struct zfcp_fc_els_adisc *adisc;
+	struct zfcp_fc_req *fc_req;
 	struct zfcp_adapter *adapter = port->adapter;
+	struct Scsi_Host *shost = adapter->scsi_host;
 	int ret;
 
-	adisc = kmem_cache_zalloc(zfcp_data.adisc_cache, GFP_ATOMIC);
-	if (!adisc)
+	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_ATOMIC);
+	if (!fc_req)
 		return -ENOMEM;
 
-	adisc->els.port = port;
-	adisc->els.req = &adisc->req;
-	adisc->els.resp = &adisc->resp;
-	sg_init_one(adisc->els.req, &adisc->adisc_req,
+	fc_req->ct_els.port = port;
+	fc_req->ct_els.req = &fc_req->sg_req;
+	fc_req->ct_els.resp = &fc_req->sg_rsp;
+	sg_init_one(&fc_req->sg_req, &fc_req->u.adisc.req,
 		    sizeof(struct fc_els_adisc));
-	sg_init_one(adisc->els.resp, &adisc->adisc_resp,
+	sg_init_one(&fc_req->sg_rsp, &fc_req->u.adisc.rsp,
 		    sizeof(struct fc_els_adisc));
 
-	adisc->els.handler = zfcp_fc_adisc_handler;
-	adisc->els.handler_data = adisc;
+	fc_req->ct_els.handler = zfcp_fc_adisc_handler;
+	fc_req->ct_els.handler_data = fc_req;
 
 	/* acc. to FC-FS, hard_nport_id in ADISC should not be set for ports
 	   without FC-AL-2 capability, so we don't set it */
-	adisc->adisc_req.adisc_wwpn = fc_host_port_name(adapter->scsi_host);
-	adisc->adisc_req.adisc_wwnn = fc_host_node_name(adapter->scsi_host);
-	adisc->adisc_req.adisc_cmd = ELS_ADISC;
-	hton24(adisc->adisc_req.adisc_port_id,
-	       fc_host_port_id(adapter->scsi_host));
+	fc_req->u.adisc.req.adisc_wwpn = fc_host_port_name(shost);
+	fc_req->u.adisc.req.adisc_wwnn = fc_host_node_name(shost);
+	fc_req->u.adisc.req.adisc_cmd = ELS_ADISC;
+	hton24(fc_req->u.adisc.req.adisc_port_id, fc_host_port_id(shost));
 
-	ret = zfcp_fsf_send_els(adapter, port->d_id, &adisc->els,
+	ret = zfcp_fsf_send_els(adapter, port->d_id, &fc_req->ct_els,
 				ZFCP_FC_CTELS_TMO);
 	if (ret)
-		kmem_cache_free(zfcp_data.adisc_cache, adisc);
+		kmem_cache_free(zfcp_fc_req_cache, fc_req);
 
 	return ret;
 }
@@ -528,68 +529,42 @@ void zfcp_fc_test_link(struct zfcp_port *port)
 		put_device(&port->dev);
 }
 
-static void zfcp_free_sg_env(struct zfcp_fc_gpn_ft *gpn_ft, int buf_num)
+static struct zfcp_fc_req *zfcp_alloc_sg_env(int buf_num)
 {
-	struct scatterlist *sg = &gpn_ft->sg_req;
-
-	kmem_cache_free(zfcp_data.gpn_ft_cache, sg_virt(sg));
-	zfcp_sg_free_table(gpn_ft->sg_resp, buf_num);
-
-	kfree(gpn_ft);
-}
+	struct zfcp_fc_req *fc_req;
 
-static struct zfcp_fc_gpn_ft *zfcp_alloc_sg_env(int buf_num)
-{
-	struct zfcp_fc_gpn_ft *gpn_ft;
-	struct zfcp_fc_gpn_ft_req *req;
-
-	gpn_ft = kzalloc(sizeof(*gpn_ft), GFP_KERNEL);
-	if (!gpn_ft)
+	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_KERNEL);
+	if (!fc_req)
 		return NULL;
 
-	req = kmem_cache_zalloc(zfcp_data.gpn_ft_cache, GFP_KERNEL);
-	if (!req) {
-		kfree(gpn_ft);
-		gpn_ft = NULL;
-		goto out;
+	if (zfcp_sg_setup_table(&fc_req->sg_rsp, buf_num)) {
+		kmem_cache_free(zfcp_fc_req_cache, fc_req);
+		return NULL;
 	}
-	sg_init_one(&gpn_ft->sg_req, req, sizeof(*req));
 
-	if (zfcp_sg_setup_table(gpn_ft->sg_resp, buf_num)) {
-		zfcp_free_sg_env(gpn_ft, buf_num);
-		gpn_ft = NULL;
-	}
-out:
-	return gpn_ft;
-}
+	sg_init_one(&fc_req->sg_req, &fc_req->u.gpn_ft.req,
+		    sizeof(struct zfcp_fc_gpn_ft_req));
 
+	return fc_req;
+}
 
-static int zfcp_fc_send_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
+static int zfcp_fc_send_gpn_ft(struct zfcp_fc_req *fc_req,
 			       struct zfcp_adapter *adapter, int max_bytes)
 {
-	struct zfcp_fsf_ct_els *ct = &gpn_ft->ct;
-	struct zfcp_fc_gpn_ft_req *req = sg_virt(&gpn_ft->sg_req);
+	struct zfcp_fsf_ct_els *ct_els = &fc_req->ct_els;
+	struct zfcp_fc_gpn_ft_req *req = &fc_req->u.gpn_ft.req;
 	DECLARE_COMPLETION_ONSTACK(completion);
 	int ret;
 
-	/* prepare CT IU for GPN_FT */
-	req->ct_hdr.ct_rev = FC_CT_REV;
-	req->ct_hdr.ct_fs_type = FC_FST_DIR;
-	req->ct_hdr.ct_fs_subtype = FC_NS_SUBTYPE;
-	req->ct_hdr.ct_options = 0;
-	req->ct_hdr.ct_cmd = FC_NS_GPN_FT;
-	req->ct_hdr.ct_mr_size = max_bytes / 4;
-	req->gpn_ft.fn_domain_id_scope = 0;
-	req->gpn_ft.fn_area_id_scope = 0;
+	zfcp_fc_ct_ns_init(&req->ct_hdr, FC_NS_GPN_FT, max_bytes);
 	req->gpn_ft.fn_fc4_type = FC_TYPE_FCP;
 
-	/* prepare zfcp_send_ct */
-	ct->handler = zfcp_fc_complete;
-	ct->handler_data = &completion;
-	ct->req = &gpn_ft->sg_req;
-	ct->resp = gpn_ft->sg_resp;
+	ct_els->handler = zfcp_fc_complete;
+	ct_els->handler_data = &completion;
+	ct_els->req = &fc_req->sg_req;
+	ct_els->resp = &fc_req->sg_rsp;
 
-	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct, NULL,
+	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct_els, NULL,
 			       ZFCP_FC_CTELS_TMO);
 	if (!ret)
 		wait_for_completion(&completion);
@@ -610,11 +585,11 @@ static void zfcp_fc_validate_port(struct zfcp_port *port, struct list_head *lh)
 	list_move_tail(&port->list, lh);
 }
 
-static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
+static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_req *fc_req,
 			       struct zfcp_adapter *adapter, int max_entries)
 {
-	struct zfcp_fsf_ct_els *ct = &gpn_ft->ct;
-	struct scatterlist *sg = gpn_ft->sg_resp;
+	struct zfcp_fsf_ct_els *ct_els = &fc_req->ct_els;
+	struct scatterlist *sg = &fc_req->sg_rsp;
 	struct fc_ct_hdr *hdr = sg_virt(sg);
 	struct fc_gpn_ft_resp *acc = sg_virt(sg);
 	struct zfcp_port *port, *tmp;
@@ -623,7 +598,7 @@ static int zfcp_fc_eval_gpn_ft(struct zfcp_fc_gpn_ft *gpn_ft,
 	u32 d_id;
 	int ret = 0, x, last = 0;
 
-	if (ct->status)
+	if (ct_els->status)
 		return -EIO;
 
 	if (hdr->ct_cmd != FC_FS_ACC) {
@@ -687,7 +662,7 @@ void zfcp_fc_scan_ports(struct work_struct *work)
 	struct zfcp_adapter *adapter = container_of(work, struct zfcp_adapter,
 						    scan_work);
 	int ret, i;
-	struct zfcp_fc_gpn_ft *gpn_ft;
+	struct zfcp_fc_req *fc_req;
 	int chain, max_entries, buf_num, max_bytes;
 
 	chain = adapter->adapter_features & FSF_FEATURE_ELS_CT_CHAINED_SBALS;
@@ -702,25 +677,145 @@ void zfcp_fc_scan_ports(struct work_struct *work)
 	if (zfcp_fc_wka_port_get(&adapter->gs->ds))
 		return;
 
-	gpn_ft = zfcp_alloc_sg_env(buf_num);
-	if (!gpn_ft)
+	fc_req = zfcp_alloc_sg_env(buf_num);
+	if (!fc_req)
 		goto out;
 
 	for (i = 0; i < 3; i++) {
-		ret = zfcp_fc_send_gpn_ft(gpn_ft, adapter, max_bytes);
+		ret = zfcp_fc_send_gpn_ft(fc_req, adapter, max_bytes);
 		if (!ret) {
-			ret = zfcp_fc_eval_gpn_ft(gpn_ft, adapter, max_entries);
+			ret = zfcp_fc_eval_gpn_ft(fc_req, adapter, max_entries);
 			if (ret == -EAGAIN)
 				ssleep(1);
 			else
 				break;
 		}
 	}
-	zfcp_free_sg_env(gpn_ft, buf_num);
+	zfcp_sg_free_table(&fc_req->sg_rsp, buf_num);
+	kmem_cache_free(zfcp_fc_req_cache, fc_req);
 out:
 	zfcp_fc_wka_port_put(&adapter->gs->ds);
 }
 
+static int zfcp_fc_gspn(struct zfcp_adapter *adapter,
+			struct zfcp_fc_req *fc_req)
+{
+	DECLARE_COMPLETION_ONSTACK(completion);
+	char devno[] = "DEVNO:";
+	struct zfcp_fsf_ct_els *ct_els = &fc_req->ct_els;
+	struct zfcp_fc_gspn_req *gspn_req = &fc_req->u.gspn.req;
+	struct zfcp_fc_gspn_rsp *gspn_rsp = &fc_req->u.gspn.rsp;
+	int ret;
+
+	zfcp_fc_ct_ns_init(&gspn_req->ct_hdr, FC_NS_GSPN_ID,
+			   FC_SYMBOLIC_NAME_SIZE);
+	hton24(gspn_req->gspn.fp_fid, fc_host_port_id(adapter->scsi_host));
+
+	sg_init_one(&fc_req->sg_req, gspn_req, sizeof(*gspn_req));
+	sg_init_one(&fc_req->sg_rsp, gspn_rsp, sizeof(*gspn_rsp));
+
+	ct_els->handler = zfcp_fc_complete;
+	ct_els->handler_data = &completion;
+	ct_els->req = &fc_req->sg_req;
+	ct_els->resp = &fc_req->sg_rsp;
+
+	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct_els, NULL,
+			       ZFCP_FC_CTELS_TMO);
+	if (ret)
+		return ret;
+
+	wait_for_completion(&completion);
+	if (ct_els->status)
+		return ct_els->status;
+
+	if (fc_host_port_type(adapter->scsi_host) == FC_PORTTYPE_NPIV &&
+	    !(strstr(gspn_rsp->gspn.fp_name, devno)))
+		snprintf(fc_host_symbolic_name(adapter->scsi_host),
+			 FC_SYMBOLIC_NAME_SIZE, "%s%s %s NAME: %s",
+			 gspn_rsp->gspn.fp_name, devno,
+			 dev_name(&adapter->ccw_device->dev),
+			 init_utsname()->nodename);
+	else
+		strlcpy(fc_host_symbolic_name(adapter->scsi_host),
+			gspn_rsp->gspn.fp_name, FC_SYMBOLIC_NAME_SIZE);
+
+	return 0;
+}
+
+static void zfcp_fc_rspn(struct zfcp_adapter *adapter,
+			 struct zfcp_fc_req *fc_req)
+{
+	DECLARE_COMPLETION_ONSTACK(completion);
+	struct Scsi_Host *shost = adapter->scsi_host;
+	struct zfcp_fsf_ct_els *ct_els = &fc_req->ct_els;
+	struct zfcp_fc_rspn_req *rspn_req = &fc_req->u.rspn.req;
+	struct fc_ct_hdr *rspn_rsp = &fc_req->u.rspn.rsp;
+	int ret, len;
+
+	zfcp_fc_ct_ns_init(&rspn_req->ct_hdr, FC_NS_RSPN_ID,
+			   FC_SYMBOLIC_NAME_SIZE);
+	hton24(rspn_req->rspn.fr_fid.fp_fid, fc_host_port_id(shost));
+	len = strlcpy(rspn_req->rspn.fr_name, fc_host_symbolic_name(shost),
+		      FC_SYMBOLIC_NAME_SIZE);
+	rspn_req->rspn.fr_name_len = len;
+
+	sg_init_one(&fc_req->sg_req, rspn_req, sizeof(*rspn_req));
+	sg_init_one(&fc_req->sg_rsp, rspn_rsp, sizeof(*rspn_rsp));
+
+	ct_els->handler = zfcp_fc_complete;
+	ct_els->handler_data = &completion;
+	ct_els->req = &fc_req->sg_req;
+	ct_els->resp = &fc_req->sg_rsp;
+
+	ret = zfcp_fsf_send_ct(&adapter->gs->ds, ct_els, NULL,
+			       ZFCP_FC_CTELS_TMO);
+	if (!ret)
+		wait_for_completion(&completion);
+}
+
+/**
+ * zfcp_fc_sym_name_update - Retrieve and update the symbolic port name
+ * @work: ns_up_work of the adapter where to update the symbolic port name
+ *
+ * Retrieve the current symbolic port name that may have been set by
+ * the hardware using the GSPN request and update the fc_host
+ * symbolic_name sysfs attribute. When running in NPIV mode (and hence
+ * the port name is unique for this system), update the symbolic port
+ * name to add Linux specific information and update the FC nameserver
+ * using the RSPN request.
+ */
+void zfcp_fc_sym_name_update(struct work_struct *work)
+{
+	struct zfcp_adapter *adapter = container_of(work, struct zfcp_adapter,
+						    ns_up_work);
+	int ret;
+	struct zfcp_fc_req *fc_req;
+
+	if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+	    fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
+		return;
+
+	fc_req = kmem_cache_zalloc(zfcp_fc_req_cache, GFP_KERNEL);
+	if (!fc_req)
+		return;
+
+	ret = zfcp_fc_wka_port_get(&adapter->gs->ds);
+	if (ret)
+		goto out_free;
+
+	ret = zfcp_fc_gspn(adapter, fc_req);
+	if (ret || fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
+		goto out_ds_put;
+
+	memset(fc_req, 0, sizeof(*fc_req));
+	zfcp_fc_rspn(adapter, fc_req);
+
+out_ds_put:
+	zfcp_fc_wka_port_put(&adapter->gs->ds);
+out_free:
+	kmem_cache_free(zfcp_fc_req_cache, fc_req);
+}
+
 static void zfcp_fc_ct_els_job_handler(void *data)
 {
 	struct fc_bsg_job *job = data;
diff --git a/drivers/s390/scsi/zfcp_fc.h b/drivers/s390/scsi/zfcp_fc.h
index b464ae01086c..4561f3bf7300 100644
--- a/drivers/s390/scsi/zfcp_fc.h
+++ b/drivers/s390/scsi/zfcp_fc.h
@@ -64,33 +64,16 @@ struct zfcp_fc_gid_pn_req {
 } __packed;
 
 /**
- * struct zfcp_fc_gid_pn_resp - container for ct header plus gid_pn response
+ * struct zfcp_fc_gid_pn_rsp - container for ct header plus gid_pn response
  * @ct_hdr: FC GS common transport header
  * @gid_pn: GID_PN response
  */
-struct zfcp_fc_gid_pn_resp {
+struct zfcp_fc_gid_pn_rsp {
 	struct fc_ct_hdr	ct_hdr;
 	struct fc_gid_pn_resp	gid_pn;
 } __packed;
 
 /**
- * struct zfcp_fc_gid_pn - everything required in zfcp for gid_pn request
- * @ct: data passed to zfcp_fsf for issuing fsf request
- * @sg_req: scatterlist entry for request data
- * @sg_resp: scatterlist entry for response data
- * @gid_pn_req: GID_PN request data
- * @gid_pn_resp: GID_PN response data
- */
-struct zfcp_fc_gid_pn {
-	struct zfcp_fsf_ct_els ct;
-	struct scatterlist sg_req;
-	struct scatterlist sg_resp;
-	struct zfcp_fc_gid_pn_req gid_pn_req;
-	struct zfcp_fc_gid_pn_resp gid_pn_resp;
-	struct zfcp_port *port;
-};
-
-/**
  * struct zfcp_fc_gpn_ft - container for ct header plus gpn_ft request
  * @ct_hdr: FC GS common transport header
  * @gpn_ft: GPN_FT request
@@ -101,41 +84,72 @@ struct zfcp_fc_gpn_ft_req {
 } __packed;
 
 /**
- * struct zfcp_fc_gpn_ft_resp - container for ct header plus gpn_ft response
+ * struct zfcp_fc_gspn_req - container for ct header plus GSPN_ID request
  * @ct_hdr: FC GS common transport header
- * @gpn_ft: Array of gpn_ft response data to fill one memory page
+ * @gspn: GSPN_ID request
  */
-struct zfcp_fc_gpn_ft_resp {
+struct zfcp_fc_gspn_req {
 	struct fc_ct_hdr	ct_hdr;
-	struct fc_gpn_ft_resp	gpn_ft[ZFCP_FC_GPN_FT_ENT_PAGE];
+	struct fc_gid_pn_resp	gspn;
 } __packed;
 
 /**
- * struct zfcp_fc_gpn_ft - zfcp data for gpn_ft request
- * @ct: data passed to zfcp_fsf for issuing fsf request
- * @sg_req: scatter list entry for gpn_ft request
- * @sg_resp: scatter list entries for gpn_ft responses (per memory page)
+ * struct zfcp_fc_gspn_rsp - container for ct header plus GSPN_ID response
+ * @ct_hdr: FC GS common transport header
+ * @gspn: GSPN_ID response
+ * @name: The name string of the GSPN_ID response
  */
-struct zfcp_fc_gpn_ft {
-	struct zfcp_fsf_ct_els ct;
-	struct scatterlist sg_req;
-	struct scatterlist sg_resp[ZFCP_FC_GPN_FT_NUM_BUFS];
-};
+struct zfcp_fc_gspn_rsp {
+	struct fc_ct_hdr	ct_hdr;
+	struct fc_gspn_resp	gspn;
+	char			name[FC_SYMBOLIC_NAME_SIZE];
+} __packed;
 
 /**
- * struct zfcp_fc_els_adisc - everything required in zfcp for issuing ELS ADISC
- * @els: data required for issuing els fsf command
- * @req: scatterlist entry for ELS ADISC request
- * @resp: scatterlist entry for ELS ADISC response
- * @adisc_req: ELS ADISC request data
- * @adisc_resp: ELS ADISC response data
+ * struct zfcp_fc_rspn_req - container for ct header plus RSPN_ID request
+ * @ct_hdr: FC GS common transport header
+ * @rspn: RSPN_ID request
+ * @name: The name string of the RSPN_ID request
  */
-struct zfcp_fc_els_adisc {
-	struct zfcp_fsf_ct_els els;
-	struct scatterlist req;
-	struct scatterlist resp;
-	struct fc_els_adisc adisc_req;
-	struct fc_els_adisc adisc_resp;
+struct zfcp_fc_rspn_req {
+	struct fc_ct_hdr	ct_hdr;
+	struct fc_ns_rspn	rspn;
+	char			name[FC_SYMBOLIC_NAME_SIZE];
+} __packed;
+
+/**
+ * struct zfcp_fc_req - Container for FC ELS and CT requests sent from zfcp
+ * @ct_els: data required for issuing fsf command
+ * @sg_req: scatterlist entry for request data
+ * @sg_rsp: scatterlist entry for response data
+ * @u: request specific data
+ */
+struct zfcp_fc_req {
+	struct zfcp_fsf_ct_els				ct_els;
+	struct scatterlist				sg_req;
+	struct scatterlist				sg_rsp;
+	union {
+		struct {
+			struct fc_els_adisc		req;
+			struct fc_els_adisc		rsp;
+		} adisc;
+		struct {
+			struct zfcp_fc_gid_pn_req	req;
+			struct zfcp_fc_gid_pn_rsp	rsp;
+		} gid_pn;
+		struct {
+			struct scatterlist sg_rsp2[ZFCP_FC_GPN_FT_NUM_BUFS - 1];
+			struct zfcp_fc_gpn_ft_req	req;
+		} gpn_ft;
+		struct {
+			struct zfcp_fc_gspn_req		req;
+			struct zfcp_fc_gspn_rsp		rsp;
+		} gspn;
+		struct {
+			struct zfcp_fc_rspn_req		req;
+			struct fc_ct_hdr		rsp;
+		} rspn;
+	} u;
 };
 
 /**
@@ -192,14 +206,21 @@ struct zfcp_fc_wka_ports {
  * zfcp_fc_scsi_to_fcp - setup FCP command with data from scsi_cmnd
  * @fcp: fcp_cmnd to setup
  * @scsi: scsi_cmnd where to get LUN, task attributes/flags and CDB
+ * @tm: task management flags to setup task management command
  */
 static inline
-void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi)
+void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi,
+			 u8 tm_flags)
 {
 	char tag[2];
 
 	int_to_scsilun(scsi->device->lun, (struct scsi_lun *) &fcp->fc_lun);
 
+	if (unlikely(tm_flags)) {
+		fcp->fc_tm_flags = tm_flags;
+		return;
+	}
+
 	if (scsi_populate_tag_msg(scsi, tag)) {
 		switch (tag[0]) {
 		case MSG_ORDERED_TAG:
@@ -226,19 +247,6 @@ void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi)
 }
 
 /**
- * zfcp_fc_fcp_tm - setup FCP command as task management command
- * @fcp: fcp_cmnd to setup
- * @dev: scsi_device where to send the task management command
- * @tm: task management flags to setup tm command
- */
-static inline
-void zfcp_fc_fcp_tm(struct fcp_cmnd *fcp, struct scsi_device *dev, u8 tm_flags)
-{
-	int_to_scsilun(dev->lun, (struct scsi_lun *) &fcp->fc_lun);
-	fcp->fc_tm_flags |= tm_flags;
-}
-
-/**
  * zfcp_fc_evap_fcp_rsp - evaluate FCP RSP IU and update scsi_cmnd accordingly
  * @fcp_rsp: FCP RSP IU to evaluate
  * @scsi: SCSI command where to update status and sense buffer
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 60ff9d172c79..a0e05ef65924 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -18,6 +18,8 @@
 #include "zfcp_qdio.h"
 #include "zfcp_reqlist.h"
 
+struct kmem_cache *zfcp_fsf_qtcb_cache;
+
 static void zfcp_fsf_request_timeout_handler(unsigned long data)
 {
 	struct zfcp_adapter *adapter = (struct zfcp_adapter *) data;
@@ -83,7 +85,7 @@ void zfcp_fsf_req_free(struct zfcp_fsf_req *req)
 	}
 
 	if (likely(req->qtcb))
-		kmem_cache_free(zfcp_data.qtcb_cache, req->qtcb);
+		kmem_cache_free(zfcp_fsf_qtcb_cache, req->qtcb);
 	kfree(req);
 }
 
@@ -212,7 +214,7 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 
 	if (req->status & ZFCP_STATUS_FSFREQ_DISMISSED) {
 		zfcp_dbf_hba_fsf_uss("fssrh_1", req);
-		mempool_free(sr_buf, adapter->pool.status_read_data);
+		mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data);
 		zfcp_fsf_req_free(req);
 		return;
 	}
@@ -265,7 +267,7 @@ static void zfcp_fsf_status_read_handler(struct zfcp_fsf_req *req)
 		break;
 	}
 
-	mempool_free(sr_buf, adapter->pool.status_read_data);
+	mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data);
 	zfcp_fsf_req_free(req);
 
 	atomic_inc(&adapter->stat_miss);
@@ -628,7 +630,7 @@ static struct fsf_qtcb *zfcp_qtcb_alloc(mempool_t *pool)
 	if (likely(pool))
 		qtcb = mempool_alloc(pool, GFP_ATOMIC);
 	else
-		qtcb = kmem_cache_alloc(zfcp_data.qtcb_cache, GFP_ATOMIC);
+		qtcb = kmem_cache_alloc(zfcp_fsf_qtcb_cache, GFP_ATOMIC);
 
 	if (unlikely(!qtcb))
 		return NULL;
@@ -723,6 +725,7 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio)
 	struct zfcp_adapter *adapter = qdio->adapter;
 	struct zfcp_fsf_req *req;
 	struct fsf_status_read_buffer *sr_buf;
+	struct page *page;
 	int retval = -EIO;
 
 	spin_lock_irq(&qdio->req_q_lock);
@@ -736,11 +739,12 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio)
 		goto out;
 	}
 
-	sr_buf = mempool_alloc(adapter->pool.status_read_data, GFP_ATOMIC);
-	if (!sr_buf) {
+	page = mempool_alloc(adapter->pool.sr_data, GFP_ATOMIC);
+	if (!page) {
 		retval = -ENOMEM;
 		goto failed_buf;
 	}
+	sr_buf = page_address(page);
 	memset(sr_buf, 0, sizeof(*sr_buf));
 	req->data = sr_buf;
 
@@ -755,7 +759,7 @@ int zfcp_fsf_status_read(struct zfcp_qdio *qdio)
 
 failed_req_send:
 	req->data = NULL;
-	mempool_free(sr_buf, adapter->pool.status_read_data);
+	mempool_free(virt_to_page(sr_buf), adapter->pool.sr_data);
 failed_buf:
 	zfcp_dbf_hba_fsf_uss("fssr__1", req);
 	zfcp_fsf_req_free(req);
@@ -1552,7 +1556,7 @@ int zfcp_fsf_open_wka_port(struct zfcp_fc_wka_port *wka_port)
 				  SBAL_FLAGS0_TYPE_READ,
 				  qdio->adapter->pool.erp_req);
 
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -1605,7 +1609,7 @@ int zfcp_fsf_close_wka_port(struct zfcp_fc_wka_port *wka_port)
 				  SBAL_FLAGS0_TYPE_READ,
 				  qdio->adapter->pool.erp_req);
 
-	if (unlikely(IS_ERR(req))) {
+	if (IS_ERR(req)) {
 		retval = PTR_ERR(req);
 		goto out;
 	}
@@ -2206,7 +2210,7 @@ int zfcp_fsf_fcp_cmnd(struct scsi_cmnd *scsi_cmnd)
 	zfcp_fsf_set_data_dir(scsi_cmnd, &io->data_direction);
 
 	fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
-	zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd);
+	zfcp_fc_scsi_to_fcp(fcp_cmnd, scsi_cmnd, 0);
 
 	if (scsi_prot_sg_count(scsi_cmnd)) {
 		zfcp_qdio_set_data_div(qdio, &req->qdio_req,
@@ -2284,7 +2288,6 @@ struct zfcp_fsf_req *zfcp_fsf_fcp_task_mgmt(struct scsi_cmnd *scmnd,
 		goto out;
 	}
 
-	req->status |= ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT;
 	req->data = scmnd;
 	req->handler = zfcp_fsf_fcp_task_mgmt_handler;
 	req->qtcb->header.lun_handle = zfcp_sdev->lun_handle;
@@ -2296,7 +2299,7 @@ struct zfcp_fsf_req *zfcp_fsf_fcp_task_mgmt(struct scsi_cmnd *scmnd,
 	zfcp_qdio_set_sbale_last(qdio, &req->qdio_req);
 
 	fcp_cmnd = (struct fcp_cmnd *) &req->qtcb->bottom.io.fcp_cmnd;
-	zfcp_fc_fcp_tm(fcp_cmnd, scmnd->device, tm_flags);
+	zfcp_fc_scsi_to_fcp(fcp_cmnd, scmnd, tm_flags);
 
 	zfcp_fsf_start_timer(req, ZFCP_SCSI_ER_TIMEOUT);
 	if (!zfcp_fsf_req_send(req))
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index ddb5800823a9..2a4991d6d4d5 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -292,7 +292,37 @@ static int zfcp_scsi_eh_host_reset_handler(struct scsi_cmnd *scpnt)
 	return SUCCESS;
 }
 
-int zfcp_adapter_scsi_register(struct zfcp_adapter *adapter)
+struct scsi_transport_template *zfcp_scsi_transport_template;
+
+static struct scsi_host_template zfcp_scsi_host_template = {
+	.module			 = THIS_MODULE,
+	.name			 = "zfcp",
+	.queuecommand		 = zfcp_scsi_queuecommand,
+	.eh_abort_handler	 = zfcp_scsi_eh_abort_handler,
+	.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
+	.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
+	.eh_host_reset_handler	 = zfcp_scsi_eh_host_reset_handler,
+	.slave_alloc		 = zfcp_scsi_slave_alloc,
+	.slave_configure	 = zfcp_scsi_slave_configure,
+	.slave_destroy		 = zfcp_scsi_slave_destroy,
+	.change_queue_depth	 = zfcp_scsi_change_queue_depth,
+	.proc_name		 = "zfcp",
+	.can_queue		 = 4096,
+	.this_id		 = -1,
+	.sg_tablesize		 = ZFCP_QDIO_MAX_SBALES_PER_REQ,
+	.max_sectors		 = (ZFCP_QDIO_MAX_SBALES_PER_REQ * 8),
+	.dma_boundary		 = ZFCP_QDIO_SBALE_LEN - 1,
+	.cmd_per_lun		 = 1,
+	.use_clustering		 = 1,
+	.shost_attrs		 = zfcp_sysfs_shost_attrs,
+	.sdev_attrs		 = zfcp_sysfs_sdev_attrs,
+};
+
+/**
+ * zfcp_scsi_adapter_register - Register SCSI and FC host with SCSI midlayer
+ * @adapter: The zfcp adapter to register with the SCSI midlayer
+ */
+int zfcp_scsi_adapter_register(struct zfcp_adapter *adapter)
 {
 	struct ccw_dev_id dev_id;
 
@@ -301,7 +331,7 @@ int zfcp_adapter_scsi_register(struct zfcp_adapter *adapter)
 
 	ccw_device_get_id(adapter->ccw_device, &dev_id);
 	/* register adapter as SCSI host with mid layer of SCSI stack */
-	adapter->scsi_host = scsi_host_alloc(&zfcp_data.scsi_host_template,
+	adapter->scsi_host = scsi_host_alloc(&zfcp_scsi_host_template,
 					     sizeof (struct zfcp_adapter *));
 	if (!adapter->scsi_host) {
 		dev_err(&adapter->ccw_device->dev,
@@ -316,7 +346,7 @@ int zfcp_adapter_scsi_register(struct zfcp_adapter *adapter)
 	adapter->scsi_host->max_channel = 0;
 	adapter->scsi_host->unique_id = dev_id.devno;
 	adapter->scsi_host->max_cmd_len = 16; /* in struct fcp_cmnd */
-	adapter->scsi_host->transportt = zfcp_data.scsi_transport_template;
+	adapter->scsi_host->transportt = zfcp_scsi_transport_template;
 
 	adapter->scsi_host->hostdata[0] = (unsigned long) adapter;
 
@@ -328,7 +358,11 @@ int zfcp_adapter_scsi_register(struct zfcp_adapter *adapter)
 	return 0;
 }
 
-void zfcp_adapter_scsi_unregister(struct zfcp_adapter *adapter)
+/**
+ * zfcp_scsi_adapter_unregister - Unregister SCSI and FC host from SCSI midlayer
+ * @adapter: The zfcp adapter to unregister.
+ */
+void zfcp_scsi_adapter_unregister(struct zfcp_adapter *adapter)
 {
 	struct Scsi_Host *shost;
 	struct zfcp_port *port;
@@ -346,8 +380,6 @@ void zfcp_adapter_scsi_unregister(struct zfcp_adapter *adapter)
 	scsi_remove_host(shost);
 	scsi_host_put(shost);
 	adapter->scsi_host = NULL;
-
-	return;
 }
 
 static struct fc_host_statistics*
@@ -688,33 +720,8 @@ struct fc_function_template zfcp_transport_functions = {
 	/* no functions registered for following dynamic attributes but
 	   directly set by LLDD */
 	.show_host_port_type = 1,
+	.show_host_symbolic_name = 1,
 	.show_host_speed = 1,
 	.show_host_port_id = 1,
 	.dd_bsg_size = sizeof(struct zfcp_fsf_ct_els),
 };
-
-struct zfcp_data zfcp_data = {
-	.scsi_host_template = {
-		.name			 = "zfcp",
-		.module			 = THIS_MODULE,
-		.proc_name		 = "zfcp",
-		.change_queue_depth	 = zfcp_scsi_change_queue_depth,
-		.slave_alloc		 = zfcp_scsi_slave_alloc,
-		.slave_configure	 = zfcp_scsi_slave_configure,
-		.slave_destroy		 = zfcp_scsi_slave_destroy,
-		.queuecommand		 = zfcp_scsi_queuecommand,
-		.eh_abort_handler	 = zfcp_scsi_eh_abort_handler,
-		.eh_device_reset_handler = zfcp_scsi_eh_device_reset_handler,
-		.eh_target_reset_handler = zfcp_scsi_eh_target_reset_handler,
-		.eh_host_reset_handler	 = zfcp_scsi_eh_host_reset_handler,
-		.can_queue		 = 4096,
-		.this_id		 = -1,
-		.sg_tablesize		 = ZFCP_QDIO_MAX_SBALES_PER_REQ,
-		.cmd_per_lun		 = 1,
-		.use_clustering		 = 1,
-		.sdev_attrs		 = zfcp_sysfs_sdev_attrs,
-		.max_sectors		 = (ZFCP_QDIO_MAX_SBALES_PER_REQ * 8),
-		.dma_boundary		 = ZFCP_QDIO_SBALE_LEN - 1,
-		.shost_attrs		 = zfcp_sysfs_shost_attrs,
-	},
-};
diff --git a/drivers/scsi/NCR5380.c b/drivers/scsi/NCR5380.c
index 9a5629f94f95..e7cd2fcbe036 100644
--- a/drivers/scsi/NCR5380.c
+++ b/drivers/scsi/NCR5380.c
@@ -936,8 +936,7 @@ static void NCR5380_exit(struct Scsi_Host *instance)
 {
 	struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
 
-	cancel_delayed_work(&hostdata->coroutine);
-	flush_scheduled_work();
+	cancel_delayed_work_sync(&hostdata->coroutine);
 }
 
 /**
diff --git a/drivers/scsi/arcmsr/arcmsr_hba.c b/drivers/scsi/arcmsr/arcmsr_hba.c
index 984bd527c6c9..da7b9887ec48 100644
--- a/drivers/scsi/arcmsr/arcmsr_hba.c
+++ b/drivers/scsi/arcmsr/arcmsr_hba.c
@@ -1020,7 +1020,7 @@ static void arcmsr_remove(struct pci_dev *pdev)
 	int poll_count = 0;
 	arcmsr_free_sysfs_attr(acb);
 	scsi_remove_host(host);
-	flush_scheduled_work();
+	flush_work_sync(&acb->arcmsr_do_message_isr_bh);
 	del_timer_sync(&acb->eternal_timer);
 	arcmsr_disable_outbound_ints(acb);
 	arcmsr_stop_adapter_bgrb(acb);
@@ -1066,7 +1066,7 @@ static void arcmsr_shutdown(struct pci_dev *pdev)
 		(struct AdapterControlBlock *)host->hostdata;
 	del_timer_sync(&acb->eternal_timer);
 	arcmsr_disable_outbound_ints(acb);
-	flush_scheduled_work();
+	flush_work_sync(&acb->arcmsr_do_message_isr_bh);
 	arcmsr_stop_adapter_bgrb(acb);
 	arcmsr_flush_adapter_cache(acb);
 }
diff --git a/drivers/scsi/be2iscsi/be_iscsi.c b/drivers/scsi/be2iscsi/be_iscsi.c
index eaaa8813067d..868cc5590145 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.c
+++ b/drivers/scsi/be2iscsi/be_iscsi.c
@@ -210,28 +210,20 @@ int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
 }
 
 /**
- * beiscsi_conn_get_param - get the iscsi parameter
- * @cls_conn: pointer to iscsi cls conn
+ * beiscsi_ep_get_param - get the iscsi parameter
+ * @ep: pointer to iscsi ep
  * @param: parameter type identifier
  * @buf: buffer pointer
  *
  * returns iscsi parameter
  */
-int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
+int beiscsi_ep_get_param(struct iscsi_endpoint *ep,
 			   enum iscsi_param param, char *buf)
 {
-	struct beiscsi_endpoint *beiscsi_ep;
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct beiscsi_conn *beiscsi_conn = conn->dd_data;
+	struct beiscsi_endpoint *beiscsi_ep = ep->dd_data;
 	int len = 0;
 
 	SE_DEBUG(DBG_LVL_8, "In beiscsi_conn_get_param, param= %d\n", param);
-	beiscsi_ep = beiscsi_conn->ep;
-	if (!beiscsi_ep) {
-		SE_DEBUG(DBG_LVL_1,
-			 "In beiscsi_conn_get_param , no beiscsi_ep\n");
-		return -ENODEV;
-	}
 
 	switch (param) {
 	case ISCSI_PARAM_CONN_PORT:
@@ -244,7 +236,7 @@ int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
 			len = sprintf(buf, "%pI6\n", &beiscsi_ep->dst6_addr);
 		break;
 	default:
-		return iscsi_conn_get_param(cls_conn, param, buf);
+		return -ENOSYS;
 	}
 	return len;
 }
diff --git a/drivers/scsi/be2iscsi/be_iscsi.h b/drivers/scsi/be2iscsi/be_iscsi.h
index 8950a702b9f4..9c532797c29e 100644
--- a/drivers/scsi/be2iscsi/be_iscsi.h
+++ b/drivers/scsi/be2iscsi/be_iscsi.h
@@ -48,8 +48,8 @@ int beiscsi_conn_bind(struct iscsi_cls_session *cls_session,
 		      struct iscsi_cls_conn *cls_conn,
 		      uint64_t transport_fd, int is_leading);
 
-int beiscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
-			   enum iscsi_param param, char *buf);
+int beiscsi_ep_get_param(struct iscsi_endpoint *ep, enum iscsi_param param,
+			 char *buf);
 
 int beiscsi_get_host_param(struct Scsi_Host *shost,
 			   enum iscsi_host_param param, char *buf);
diff --git a/drivers/scsi/be2iscsi/be_main.c b/drivers/scsi/be2iscsi/be_main.c
index 79cefbe31367..bd50145ab71b 100644
--- a/drivers/scsi/be2iscsi/be_main.c
+++ b/drivers/scsi/be2iscsi/be_main.c
@@ -4384,7 +4384,7 @@ struct iscsi_transport beiscsi_iscsi_transport = {
 	.bind_conn = beiscsi_conn_bind,
 	.destroy_conn = iscsi_conn_teardown,
 	.set_param = beiscsi_set_param,
-	.get_conn_param = beiscsi_conn_get_param,
+	.get_conn_param = iscsi_conn_get_param,
 	.get_session_param = iscsi_session_get_param,
 	.get_host_param = beiscsi_get_host_param,
 	.start_conn = beiscsi_conn_start,
@@ -4395,6 +4395,7 @@ struct iscsi_transport beiscsi_iscsi_transport = {
 	.alloc_pdu = beiscsi_alloc_pdu,
 	.parse_pdu_itt = beiscsi_parse_pdu,
 	.get_stats = beiscsi_conn_get_stats,
+	.get_ep_param = beiscsi_ep_get_param,
 	.ep_connect = beiscsi_ep_connect,
 	.ep_poll = beiscsi_ep_poll,
 	.ep_disconnect = beiscsi_ep_disconnect,
diff --git a/drivers/scsi/bnx2i/bnx2i.h b/drivers/scsi/bnx2i/bnx2i.h
index e1ca5fe7e6bb..cfd59023227b 100644
--- a/drivers/scsi/bnx2i/bnx2i.h
+++ b/drivers/scsi/bnx2i/bnx2i.h
@@ -360,7 +360,7 @@ struct bnx2i_hba {
 		#define ADAPTER_STATE_LINK_DOWN		2
 		#define ADAPTER_STATE_INIT_FAILED	31
 	unsigned int mtu_supported;
-		#define BNX2I_MAX_MTU_SUPPORTED		1500
+		#define BNX2I_MAX_MTU_SUPPORTED		9000
 
 	struct Scsi_Host *shost;
 
@@ -751,6 +751,8 @@ extern int bnx2i_send_iscsi_login(struct bnx2i_conn *conn,
 				  struct iscsi_task *mtask);
 extern int bnx2i_send_iscsi_tmf(struct bnx2i_conn *conn,
 				  struct iscsi_task *mtask);
+extern int bnx2i_send_iscsi_text(struct bnx2i_conn *conn,
+				 struct iscsi_task *mtask);
 extern int bnx2i_send_iscsi_scsicmd(struct bnx2i_conn *conn,
 				    struct bnx2i_cmd *cmnd);
 extern int bnx2i_send_iscsi_nopout(struct bnx2i_conn *conn,
diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c
index 96505e3ab986..1da34c019b8a 100644
--- a/drivers/scsi/bnx2i/bnx2i_hwi.c
+++ b/drivers/scsi/bnx2i/bnx2i_hwi.c
@@ -445,6 +445,56 @@ int bnx2i_send_iscsi_tmf(struct bnx2i_conn *bnx2i_conn,
 }
 
 /**
+ * bnx2i_send_iscsi_text - post iSCSI text WQE to hardware
+ * @conn:	iscsi connection
+ * @mtask:	driver command structure which is requesting
+ *		a WQE to sent to chip for further processing
+ *
+ * prepare and post an iSCSI Text request WQE to CNIC firmware
+ */
+int bnx2i_send_iscsi_text(struct bnx2i_conn *bnx2i_conn,
+			  struct iscsi_task *mtask)
+{
+	struct bnx2i_cmd *bnx2i_cmd;
+	struct bnx2i_text_request *text_wqe;
+	struct iscsi_text *text_hdr;
+	u32 dword;
+
+	bnx2i_cmd = (struct bnx2i_cmd *)mtask->dd_data;
+	text_hdr = (struct iscsi_text *)mtask->hdr;
+	text_wqe = (struct bnx2i_text_request *) bnx2i_conn->ep->qp.sq_prod_qe;
+
+	memset(text_wqe, 0, sizeof(struct bnx2i_text_request));
+
+	text_wqe->op_code = text_hdr->opcode;
+	text_wqe->op_attr = text_hdr->flags;
+	text_wqe->data_length = ntoh24(text_hdr->dlength);
+	text_wqe->itt = mtask->itt |
+		(ISCSI_TASK_TYPE_MPATH << ISCSI_TEXT_REQUEST_TYPE_SHIFT);
+	text_wqe->ttt = be32_to_cpu(text_hdr->ttt);
+
+	text_wqe->cmd_sn = be32_to_cpu(text_hdr->cmdsn);
+
+	text_wqe->resp_bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.resp_bd_dma;
+	text_wqe->resp_bd_list_addr_hi =
+			(u32) ((u64) bnx2i_conn->gen_pdu.resp_bd_dma >> 32);
+
+	dword = ((1 << ISCSI_TEXT_REQUEST_NUM_RESP_BDS_SHIFT) |
+		 (bnx2i_conn->gen_pdu.resp_buf_size <<
+		  ISCSI_TEXT_REQUEST_RESP_BUFFER_LENGTH_SHIFT));
+	text_wqe->resp_buffer = dword;
+	text_wqe->bd_list_addr_lo = (u32) bnx2i_conn->gen_pdu.req_bd_dma;
+	text_wqe->bd_list_addr_hi =
+			(u32) ((u64) bnx2i_conn->gen_pdu.req_bd_dma >> 32);
+	text_wqe->num_bds = 1;
+	text_wqe->cq_index = 0; /* CQ# used for completion, 5771x only */
+
+	bnx2i_ring_dbell_update_sq_params(bnx2i_conn, 1);
+	return 0;
+}
+
+
+/**
  * bnx2i_send_iscsi_scsicmd - post iSCSI scsicmd request WQE to hardware
  * @conn:	iscsi connection
  * @cmd:	driver command structure which is requesting
@@ -490,15 +540,18 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn,
 	bnx2i_cmd = (struct bnx2i_cmd *)task->dd_data;
 	nopout_hdr = (struct iscsi_nopout *)task->hdr;
 	nopout_wqe = (struct bnx2i_nop_out_request *)ep->qp.sq_prod_qe;
+
+	memset(nopout_wqe, 0x00, sizeof(struct bnx2i_nop_out_request));
+
 	nopout_wqe->op_code = nopout_hdr->opcode;
 	nopout_wqe->op_attr = ISCSI_FLAG_CMD_FINAL;
 	memcpy(nopout_wqe->lun, nopout_hdr->lun, 8);
 
 	if (test_bit(BNX2I_NX2_DEV_57710, &ep->hba->cnic_dev_type)) {
-		u32 tmp = nopout_hdr->lun[0];
+		u32 tmp = nopout_wqe->lun[0];
 		/* 57710 requires LUN field to be swapped */
-		nopout_hdr->lun[0] = nopout_hdr->lun[1];
-		nopout_hdr->lun[1] = tmp;
+		nopout_wqe->lun[0] = nopout_wqe->lun[1];
+		nopout_wqe->lun[1] = tmp;
 	}
 
 	nopout_wqe->itt = ((u16)task->itt |
@@ -1425,6 +1478,68 @@ done:
 	return 0;
 }
 
+
+/**
+ * bnx2i_process_text_resp - this function handles iscsi text response
+ * @session:	iscsi session pointer
+ * @bnx2i_conn:	iscsi connection pointer
+ * @cqe:	pointer to newly DMA'ed CQE entry for processing
+ *
+ * process iSCSI Text Response CQE&  complete it to open-iscsi user daemon
+ */
+static int bnx2i_process_text_resp(struct iscsi_session *session,
+				   struct bnx2i_conn *bnx2i_conn,
+				   struct cqe *cqe)
+{
+	struct iscsi_conn *conn = bnx2i_conn->cls_conn->dd_data;
+	struct iscsi_task *task;
+	struct bnx2i_text_response *text;
+	struct iscsi_text_rsp *resp_hdr;
+	int pld_len;
+	int pad_len;
+
+	text = (struct bnx2i_text_response *) cqe;
+	spin_lock(&session->lock);
+	task = iscsi_itt_to_task(conn, text->itt & ISCSI_LOGIN_RESPONSE_INDEX);
+	if (!task)
+		goto done;
+
+	resp_hdr = (struct iscsi_text_rsp *)&bnx2i_conn->gen_pdu.resp_hdr;
+	memset(resp_hdr, 0, sizeof(struct iscsi_hdr));
+	resp_hdr->opcode = text->op_code;
+	resp_hdr->flags = text->response_flags;
+	resp_hdr->hlength = 0;
+
+	hton24(resp_hdr->dlength, text->data_length);
+	resp_hdr->itt = task->hdr->itt;
+	resp_hdr->ttt = cpu_to_be32(text->ttt);
+	resp_hdr->statsn = task->hdr->exp_statsn;
+	resp_hdr->exp_cmdsn = cpu_to_be32(text->exp_cmd_sn);
+	resp_hdr->max_cmdsn = cpu_to_be32(text->max_cmd_sn);
+	pld_len = text->data_length;
+	bnx2i_conn->gen_pdu.resp_wr_ptr = bnx2i_conn->gen_pdu.resp_buf +
+					  pld_len;
+	pad_len = 0;
+	if (pld_len & 0x3)
+		pad_len = 4 - (pld_len % 4);
+
+	if (pad_len) {
+		int i = 0;
+		for (i = 0; i < pad_len; i++) {
+			bnx2i_conn->gen_pdu.resp_wr_ptr[0] = 0;
+			bnx2i_conn->gen_pdu.resp_wr_ptr++;
+		}
+	}
+	__iscsi_complete_pdu(conn, (struct iscsi_hdr *)resp_hdr,
+			     bnx2i_conn->gen_pdu.resp_buf,
+			     bnx2i_conn->gen_pdu.resp_wr_ptr -
+			     bnx2i_conn->gen_pdu.resp_buf);
+done:
+	spin_unlock(&session->lock);
+	return 0;
+}
+
+
 /**
  * bnx2i_process_tmf_resp - this function handles iscsi TMF response
  * @session:		iscsi session pointer
@@ -1766,6 +1881,10 @@ static void bnx2i_process_new_cqes(struct bnx2i_conn *bnx2i_conn)
 			bnx2i_process_tmf_resp(session, bnx2i_conn,
 					       qp->cq_cons_qe);
 			break;
+		case ISCSI_OP_TEXT_RSP:
+			bnx2i_process_text_resp(session, bnx2i_conn,
+						qp->cq_cons_qe);
+			break;
 		case ISCSI_OP_LOGOUT_RSP:
 			bnx2i_process_logout_resp(session, bnx2i_conn,
 						  qp->cq_cons_qe);
diff --git a/drivers/scsi/bnx2i/bnx2i_init.c b/drivers/scsi/bnx2i/bnx2i_init.c
index 72a7b2d4a439..1d24a2819736 100644
--- a/drivers/scsi/bnx2i/bnx2i_init.c
+++ b/drivers/scsi/bnx2i/bnx2i_init.c
@@ -18,8 +18,8 @@ static struct list_head adapter_list = LIST_HEAD_INIT(adapter_list);
 static u32 adapter_count;
 
 #define DRV_MODULE_NAME		"bnx2i"
-#define DRV_MODULE_VERSION	"2.6.2.2"
-#define DRV_MODULE_RELDATE	"Nov 23, 2010"
+#define DRV_MODULE_VERSION	"2.6.2.3"
+#define DRV_MODULE_RELDATE	"Dec 31, 2010"
 
 static char version[] __devinitdata =
 		"Broadcom NetXtreme II iSCSI Driver " DRV_MODULE_NAME \
@@ -29,7 +29,7 @@ static char version[] __devinitdata =
 MODULE_AUTHOR("Anil Veerabhadrappa <anilgv@broadcom.com> and "
 	      "Eddie Wai <eddie.wai@broadcom.com>");
 
-MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709/57710/57711"
+MODULE_DESCRIPTION("Broadcom NetXtreme II BCM5706/5708/5709/57710/57711/57712"
 		   " iSCSI Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(DRV_MODULE_VERSION);
@@ -88,9 +88,11 @@ void bnx2i_identify_device(struct bnx2i_hba *hba)
 	    (hba->pci_did == PCI_DEVICE_ID_NX2_5709S)) {
 		set_bit(BNX2I_NX2_DEV_5709, &hba->cnic_dev_type);
 		hba->mail_queue_access = BNX2I_MQ_BIN_MODE;
-	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710 ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57711 ||
-		   hba->pci_did == PCI_DEVICE_ID_NX2_57711E)
+	} else if (hba->pci_did == PCI_DEVICE_ID_NX2_57710  ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57711  ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57711E ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57712  ||
+		   hba->pci_did == PCI_DEVICE_ID_NX2_57712E)
 		set_bit(BNX2I_NX2_DEV_57710, &hba->cnic_dev_type);
 	else
 		printk(KERN_ALERT "bnx2i: unknown device, 0x%x\n",
@@ -161,6 +163,21 @@ void bnx2i_start(void *handle)
 	struct bnx2i_hba *hba = handle;
 	int i = HZ;
 
+	if (!hba->cnic->max_iscsi_conn) {
+		printk(KERN_ALERT "bnx2i: dev %s does not support "
+			"iSCSI\n", hba->netdev->name);
+
+		if (test_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic)) {
+			mutex_lock(&bnx2i_dev_lock);
+			list_del_init(&hba->link);
+			adapter_count--;
+			hba->cnic->unregister_device(hba->cnic, CNIC_ULP_ISCSI);
+			clear_bit(BNX2I_CNIC_REGISTERED, &hba->reg_with_cnic);
+			mutex_unlock(&bnx2i_dev_lock);
+			bnx2i_free_hba(hba);
+		}
+		return;
+	}
 	bnx2i_send_fw_iscsi_init_msg(hba);
 	while (!test_bit(ADAPTER_STATE_UP, &hba->adapter_state) && i--)
 		msleep(BNX2I_INIT_POLL_TIME);
diff --git a/drivers/scsi/bnx2i/bnx2i_iscsi.c b/drivers/scsi/bnx2i/bnx2i_iscsi.c
index f0dce26593eb..1809f9ccc4ce 100644
--- a/drivers/scsi/bnx2i/bnx2i_iscsi.c
+++ b/drivers/scsi/bnx2i/bnx2i_iscsi.c
@@ -1092,6 +1092,9 @@ static int bnx2i_iscsi_send_generic_request(struct iscsi_task *task)
 	case ISCSI_OP_SCSI_TMFUNC:
 		rc = bnx2i_send_iscsi_tmf(bnx2i_conn, task);
 		break;
+	case ISCSI_OP_TEXT:
+		rc = bnx2i_send_iscsi_text(bnx2i_conn, task);
+		break;
 	default:
 		iscsi_conn_printk(KERN_ALERT, bnx2i_conn->cls_conn->dd_data,
 				  "send_gen: unsupported op 0x%x\n",
@@ -1455,42 +1458,40 @@ static void bnx2i_conn_destroy(struct iscsi_cls_conn *cls_conn)
 
 
 /**
- * bnx2i_conn_get_param - return iscsi connection parameter to caller
- * @cls_conn:	pointer to iscsi cls conn
+ * bnx2i_ep_get_param - return iscsi ep parameter to caller
+ * @ep:		pointer to iscsi endpoint
  * @param:	parameter type identifier
  * @buf: 	buffer pointer
  *
- * returns iSCSI connection parameters
+ * returns iSCSI ep parameters
  */
-static int bnx2i_conn_get_param(struct iscsi_cls_conn *cls_conn,
-				enum iscsi_param param, char *buf)
+static int bnx2i_ep_get_param(struct iscsi_endpoint *ep,
+			      enum iscsi_param param, char *buf)
 {
-	struct iscsi_conn *conn = cls_conn->dd_data;
-	struct bnx2i_conn *bnx2i_conn = conn->dd_data;
-	int len = 0;
+	struct bnx2i_endpoint *bnx2i_ep = ep->dd_data;
+	struct bnx2i_hba *hba = bnx2i_ep->hba;
+	int len = -ENOTCONN;
 
-	if (!(bnx2i_conn && bnx2i_conn->ep && bnx2i_conn->ep->hba))
-		goto out;
+	if (!hba)
+		return -ENOTCONN;
 
 	switch (param) {
 	case ISCSI_PARAM_CONN_PORT:
-		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
-		if (bnx2i_conn->ep->cm_sk)
-			len = sprintf(buf, "%hu\n",
-				      bnx2i_conn->ep->cm_sk->dst_port);
-		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
+		mutex_lock(&hba->net_dev_lock);
+		if (bnx2i_ep->cm_sk)
+			len = sprintf(buf, "%hu\n", bnx2i_ep->cm_sk->dst_port);
+		mutex_unlock(&hba->net_dev_lock);
 		break;
 	case ISCSI_PARAM_CONN_ADDRESS:
-		mutex_lock(&bnx2i_conn->ep->hba->net_dev_lock);
-		if (bnx2i_conn->ep->cm_sk)
-			len = sprintf(buf, "%pI4\n",
-				      &bnx2i_conn->ep->cm_sk->dst_ip);
-		mutex_unlock(&bnx2i_conn->ep->hba->net_dev_lock);
+		mutex_lock(&hba->net_dev_lock);
+		if (bnx2i_ep->cm_sk)
+			len = sprintf(buf, "%pI4\n", &bnx2i_ep->cm_sk->dst_ip);
+		mutex_unlock(&hba->net_dev_lock);
 		break;
 	default:
-		return iscsi_conn_get_param(cls_conn, param, buf);
+		return -ENOSYS;
 	}
-out:
+
 	return len;
 }
 
@@ -1935,13 +1936,13 @@ static int bnx2i_ep_tcp_conn_active(struct bnx2i_endpoint *bnx2i_ep)
 		cnic_dev_10g = 1;
 
 	switch (bnx2i_ep->state) {
-	case EP_STATE_CONNECT_FAILED:
 	case EP_STATE_CLEANUP_FAILED:
 	case EP_STATE_OFLD_FAILED:
 	case EP_STATE_DISCONN_TIMEDOUT:
 		ret = 0;
 		break;
 	case EP_STATE_CONNECT_START:
+	case EP_STATE_CONNECT_FAILED:
 	case EP_STATE_CONNECT_COMPL:
 	case EP_STATE_ULP_UPDATE_START:
 	case EP_STATE_ULP_UPDATE_COMPL:
@@ -2167,7 +2168,8 @@ struct iscsi_transport bnx2i_iscsi_transport = {
 	.name			= "bnx2i",
 	.caps			= CAP_RECOVERY_L0 | CAP_HDRDGST |
 				  CAP_MULTI_R2T | CAP_DATADGST |
-				  CAP_DATA_PATH_OFFLOAD,
+				  CAP_DATA_PATH_OFFLOAD |
+				  CAP_TEXT_NEGO,
 	.param_mask		= ISCSI_MAX_RECV_DLENGTH |
 				  ISCSI_MAX_XMIT_DLENGTH |
 				  ISCSI_HDRDGST_EN |
@@ -2200,7 +2202,7 @@ struct iscsi_transport bnx2i_iscsi_transport = {
 	.bind_conn		= bnx2i_conn_bind,
 	.destroy_conn		= bnx2i_conn_destroy,
 	.set_param		= iscsi_set_param,
-	.get_conn_param		= bnx2i_conn_get_param,
+	.get_conn_param		= iscsi_conn_get_param,
 	.get_session_param	= iscsi_session_get_param,
 	.get_host_param		= bnx2i_host_get_param,
 	.start_conn		= bnx2i_conn_start,
@@ -2209,6 +2211,7 @@ struct iscsi_transport bnx2i_iscsi_transport = {
 	.xmit_task		= bnx2i_task_xmit,
 	.get_stats		= bnx2i_conn_get_stats,
 	/* TCP connect - disconnect - option-2 interface calls */
+	.get_ep_param		= bnx2i_ep_get_param,
 	.ep_connect		= bnx2i_ep_connect,
 	.ep_poll		= bnx2i_ep_poll,
 	.ep_disconnect		= bnx2i_ep_disconnect,
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
index a129a170b47b..fc2cdb62f53b 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.c
@@ -105,7 +105,7 @@ static struct iscsi_transport cxgb3i_iscsi_transport = {
 	/* owner and name should be set already */
 	.caps		= CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST
 				| CAP_DATADGST | CAP_DIGEST_OFFLOAD |
-				CAP_PADDING_OFFLOAD,
+				CAP_PADDING_OFFLOAD | CAP_TEXT_NEGO,
 	.param_mask	= ISCSI_MAX_RECV_DLENGTH | ISCSI_MAX_XMIT_DLENGTH |
 				ISCSI_HDRDGST_EN | ISCSI_DATADGST_EN |
 				ISCSI_INITIAL_R2T_EN | ISCSI_MAX_R2T |
@@ -137,7 +137,7 @@ static struct iscsi_transport cxgb3i_iscsi_transport = {
 	.destroy_conn	= iscsi_tcp_conn_teardown,
 	.start_conn	= iscsi_conn_start,
 	.stop_conn	= iscsi_conn_stop,
-	.get_conn_param	= cxgbi_get_conn_param,
+	.get_conn_param	= iscsi_conn_get_param,
 	.set_param	= cxgbi_set_conn_param,
 	.get_stats	= cxgbi_get_conn_stats,
 	/* pdu xmit req from user space */
@@ -152,6 +152,7 @@ static struct iscsi_transport cxgb3i_iscsi_transport = {
 	.xmit_pdu	= cxgbi_conn_xmit_pdu,
 	.parse_pdu_itt	= cxgbi_parse_pdu_itt,
 	/* TCP connect/disconnect */
+	.get_ep_param	= cxgbi_get_ep_param,
 	.ep_connect	= cxgbi_ep_connect,
 	.ep_poll	= cxgbi_ep_poll,
 	.ep_disconnect	= cxgbi_ep_disconnect,
@@ -1108,10 +1109,11 @@ static int ddp_set_map(struct cxgbi_sock *csk, struct cxgbi_pagepod_hdr *hdr,
 		csk, idx, npods, gl);
 
 	for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) {
-		struct sk_buff *skb = ddp->gl_skb[idx];
+		struct sk_buff *skb = alloc_wr(sizeof(struct ulp_mem_io) +
+						PPOD_SIZE, 0, GFP_ATOMIC);
 
-		/* hold on to the skb until we clear the ddp mapping */
-		skb_get(skb);
+		if (!skb)
+			return -ENOMEM;
 
 		ulp_mem_io_set_hdr(skb, pm_addr);
 		cxgbi_ddp_ppod_set((struct cxgbi_pagepod *)(skb->head +
@@ -1136,56 +1138,20 @@ static void ddp_clear_map(struct cxgbi_hba *chba, unsigned int tag,
 		cdev, idx, npods, tag);
 
 	for (i = 0; i < npods; i++, idx++, pm_addr += PPOD_SIZE) {
-		struct sk_buff *skb = ddp->gl_skb[idx];
+		struct sk_buff *skb = alloc_wr(sizeof(struct ulp_mem_io) +
+						PPOD_SIZE, 0, GFP_ATOMIC);
 
 		if (!skb) {
-			pr_err("tag 0x%x, 0x%x, %d/%u, skb NULL.\n",
+			pr_err("tag 0x%x, 0x%x, %d/%u, skb OOM.\n",
 				tag, idx, i, npods);
 			continue;
 		}
-		ddp->gl_skb[idx] = NULL;
-		memset(skb->head + sizeof(struct ulp_mem_io), 0, PPOD_SIZE);
 		ulp_mem_io_set_hdr(skb, pm_addr);
 		skb->priority = CPL_PRIORITY_CONTROL;
 		cxgb3_ofld_send(cdev->lldev, skb);
 	}
 }
 
-static void ddp_free_gl_skb(struct cxgbi_ddp_info *ddp, int idx, int cnt)
-{
-	int i;
-
-	log_debug(1 << CXGBI_DBG_DDP,
-		"ddp 0x%p, idx %d, cnt %d.\n", ddp, idx, cnt);
-
-	for (i = 0; i < cnt; i++, idx++)
-		if (ddp->gl_skb[idx]) {
-			kfree_skb(ddp->gl_skb[idx]);
-			ddp->gl_skb[idx] = NULL;
-		}
-}
-
-static int ddp_alloc_gl_skb(struct cxgbi_ddp_info *ddp, int idx,
-				   int cnt, gfp_t gfp)
-{
-	int i;
-
-	log_debug(1 << CXGBI_DBG_DDP,
-		"ddp 0x%p, idx %d, cnt %d.\n", ddp, idx, cnt);
-
-	for (i = 0; i < cnt; i++) {
-		struct sk_buff *skb = alloc_wr(sizeof(struct ulp_mem_io) +
-						PPOD_SIZE, 0, gfp);
-		if (skb)
-			ddp->gl_skb[idx + i] = skb;
-		else {
-			ddp_free_gl_skb(ddp, idx, i);
-			return -ENOMEM;
-		}
-	}
-	return 0;
-}
-
 static int ddp_setup_conn_pgidx(struct cxgbi_sock *csk,
 				       unsigned int tid, int pg_idx, bool reply)
 {
@@ -1316,8 +1282,6 @@ static int cxgb3i_ddp_init(struct cxgbi_device *cdev)
 	}
 	tdev->ulp_iscsi = ddp;
 
-	cdev->csk_ddp_free_gl_skb = ddp_free_gl_skb;
-	cdev->csk_ddp_alloc_gl_skb = ddp_alloc_gl_skb;
 	cdev->csk_ddp_setup_digest = ddp_setup_conn_digest;
 	cdev->csk_ddp_setup_pgidx = ddp_setup_conn_pgidx;
 	cdev->csk_ddp_set = ddp_set_map;
diff --git a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h
index 5f5e3394b594..20593fd69d8f 100644
--- a/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgbi/cxgb3i/cxgb3i.h
@@ -24,10 +24,21 @@
 
 extern cxgb3_cpl_handler_func cxgb3i_cpl_handlers[NUM_CPL_CMDS];
 
-#define cxgb3i_get_private_ipv4addr(ndev) \
-	(((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr)
-#define cxgb3i_set_private_ipv4addr(ndev, addr) \
-	(((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr) = addr
+static inline unsigned int cxgb3i_get_private_ipv4addr(struct net_device *ndev)
+{
+	return ((struct port_info *)(netdev_priv(ndev)))->iscsi_ipv4addr;
+}
+
+static inline void cxgb3i_set_private_ipv4addr(struct net_device *ndev,
+						unsigned int addr)
+{
+	struct port_info *pi =  (struct port_info *)netdev_priv(ndev);
+
+	pi->iscsic.flags = addr ? 1 : 0;
+	pi->iscsi_ipv4addr = addr;
+	if (addr)
+		memcpy(pi->iscsic.mac_addr, ndev->dev_addr, ETH_ALEN);
+}
 
 struct cpl_iscsi_hdr_norss {
 	union opcode_tid ot;
diff --git a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
index 8c04fada710b..f3a4cd7cf782 100644
--- a/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
+++ b/drivers/scsi/cxgbi/cxgb4i/cxgb4i.c
@@ -106,7 +106,7 @@ static struct iscsi_transport cxgb4i_iscsi_transport = {
 	.name		= DRV_MODULE_NAME,
 	.caps		= CAP_RECOVERY_L0 | CAP_MULTI_R2T | CAP_HDRDGST |
 				CAP_DATADGST | CAP_DIGEST_OFFLOAD |
-				CAP_PADDING_OFFLOAD,
+				CAP_PADDING_OFFLOAD | CAP_TEXT_NEGO,
 	.param_mask	= ISCSI_MAX_RECV_DLENGTH | ISCSI_MAX_XMIT_DLENGTH |
 				ISCSI_HDRDGST_EN | ISCSI_DATADGST_EN |
 				ISCSI_INITIAL_R2T_EN | ISCSI_MAX_R2T |
@@ -138,7 +138,7 @@ static struct iscsi_transport cxgb4i_iscsi_transport = {
 	.destroy_conn	= iscsi_tcp_conn_teardown,
 	.start_conn		= iscsi_conn_start,
 	.stop_conn		= iscsi_conn_stop,
-	.get_conn_param	= cxgbi_get_conn_param,
+	.get_conn_param	= iscsi_conn_get_param,
 	.set_param	= cxgbi_set_conn_param,
 	.get_stats	= cxgbi_get_conn_stats,
 	/* pdu xmit req from user space */
@@ -153,6 +153,7 @@ static struct iscsi_transport cxgb4i_iscsi_transport = {
 	.xmit_pdu	= cxgbi_conn_xmit_pdu,
 	.parse_pdu_itt	= cxgbi_parse_pdu_itt,
 	/* TCP connect/disconnect */
+	.get_ep_param	= cxgbi_get_ep_param,
 	.ep_connect	= cxgbi_ep_connect,
 	.ep_poll	= cxgbi_ep_poll,
 	.ep_disconnect	= cxgbi_ep_disconnect,
@@ -1425,8 +1426,6 @@ static int cxgb4i_ddp_init(struct cxgbi_device *cdev)
 	cxgbi_ddp_page_size_factor(pgsz_factor);
 	cxgb4_iscsi_init(lldi->ports[0], tagmask, pgsz_factor);
 
-	cdev->csk_ddp_free_gl_skb = NULL;
-	cdev->csk_ddp_alloc_gl_skb = NULL;
 	cdev->csk_ddp_setup_digest = ddp_setup_conn_digest;
 	cdev->csk_ddp_setup_pgidx = ddp_setup_conn_pgidx;
 	cdev->csk_ddp_set = ddp_set_map;
diff --git a/drivers/scsi/cxgbi/libcxgbi.c b/drivers/scsi/cxgbi/libcxgbi.c
index d2ad3d676724..fedf1be278ff 100644
--- a/drivers/scsi/cxgbi/libcxgbi.c
+++ b/drivers/scsi/cxgbi/libcxgbi.c
@@ -543,6 +543,7 @@ static struct cxgbi_sock *cxgbi_check_route(struct sockaddr *dst_addr)
 	csk->dst = dst;
 	csk->daddr.sin_addr.s_addr = daddr->sin_addr.s_addr;
 	csk->daddr.sin_port = daddr->sin_port;
+	csk->daddr.sin_family = daddr->sin_family;
 	csk->saddr.sin_addr.s_addr = rt->rt_src;
 
 	return csk;
@@ -1277,12 +1278,6 @@ static int ddp_tag_reserve(struct cxgbi_sock *csk, unsigned int tid,
 		return idx;
 	}
 
-	if (cdev->csk_ddp_alloc_gl_skb) {
-		err = cdev->csk_ddp_alloc_gl_skb(ddp, idx, npods, gfp);
-		if (err < 0)
-			goto unmark_entries;
-	}
-
 	tag = cxgbi_ddp_tag_base(tformat, sw_tag);
 	tag |= idx << PPOD_IDX_SHIFT;
 
@@ -1293,11 +1288,8 @@ static int ddp_tag_reserve(struct cxgbi_sock *csk, unsigned int tid,
 	hdr.page_offset = htonl(gl->offset);
 
 	err = cdev->csk_ddp_set(csk, &hdr, idx, npods, gl);
-	if (err < 0) {
-		if (cdev->csk_ddp_free_gl_skb)
-			cdev->csk_ddp_free_gl_skb(ddp, idx, npods);
+	if (err < 0)
 		goto unmark_entries;
-	}
 
 	ddp->idx_last = idx;
 	log_debug(1 << CXGBI_DBG_DDP,
@@ -1363,8 +1355,6 @@ static void ddp_destroy(struct kref *kref)
 					>> PPOD_PAGES_SHIFT;
 			pr_info("cdev 0x%p, ddp %d + %d.\n", cdev, i, npods);
 			kfree(gl);
-			if (cdev->csk_ddp_free_gl_skb)
-				cdev->csk_ddp_free_gl_skb(ddp, i, npods);
 			i += npods;
 		} else
 			i++;
@@ -1407,8 +1397,6 @@ int cxgbi_ddp_init(struct cxgbi_device *cdev,
 		return -ENOMEM;
 	}
 	ddp->gl_map = (struct cxgbi_gather_list **)(ddp + 1);
-	ddp->gl_skb = (struct sk_buff **)(((char *)ddp->gl_map) +
-				ppmax * sizeof(struct cxgbi_gather_list *));
 	cdev->ddp = ddp;
 
 	spin_lock_init(&ddp->map_lock);
@@ -1908,13 +1896,16 @@ EXPORT_SYMBOL_GPL(cxgbi_conn_alloc_pdu);
 
 static inline void tx_skb_setmode(struct sk_buff *skb, int hcrc, int dcrc)
 {
-	u8 submode = 0;
+	if (hcrc || dcrc) {
+		u8 submode = 0;
 
-	if (hcrc)
-		submode |= 1;
-	if (dcrc)
-		submode |= 2;
-	cxgbi_skcb_ulp_mode(skb) = (ULP2_MODE_ISCSI << 4) | submode;
+		if (hcrc)
+			submode |= 1;
+		if (dcrc)
+			submode |= 2;
+		cxgbi_skcb_ulp_mode(skb) = (ULP2_MODE_ISCSI << 4) | submode;
+	} else
+		cxgbi_skcb_ulp_mode(skb) = 0;
 }
 
 int cxgbi_conn_init_pdu(struct iscsi_task *task, unsigned int offset,
@@ -2210,32 +2201,34 @@ int cxgbi_set_conn_param(struct iscsi_cls_conn *cls_conn,
 }
 EXPORT_SYMBOL_GPL(cxgbi_set_conn_param);
 
-int cxgbi_get_conn_param(struct iscsi_cls_conn *cls_conn,
-			enum iscsi_param param, char *buf)
+int cxgbi_get_ep_param(struct iscsi_endpoint *ep, enum iscsi_param param,
+		       char *buf)
 {
-	struct iscsi_conn *iconn = cls_conn->dd_data;
+	struct cxgbi_endpoint *cep = ep->dd_data;
+	struct cxgbi_sock *csk;
 	int len;
 
 	log_debug(1 << CXGBI_DBG_ISCSI,
-		"cls_conn 0x%p, param %d.\n", cls_conn, param);
+		"cls_conn 0x%p, param %d.\n", ep, param);
 
 	switch (param) {
 	case ISCSI_PARAM_CONN_PORT:
-		spin_lock_bh(&iconn->session->lock);
-		len = sprintf(buf, "%hu\n", iconn->portal_port);
-		spin_unlock_bh(&iconn->session->lock);
-		break;
 	case ISCSI_PARAM_CONN_ADDRESS:
-		spin_lock_bh(&iconn->session->lock);
-		len = sprintf(buf, "%s\n", iconn->portal_address);
-		spin_unlock_bh(&iconn->session->lock);
-		break;
+		if (!cep)
+			return -ENOTCONN;
+
+		csk = cep->csk;
+		if (!csk)
+			return -ENOTCONN;
+
+		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+						 &csk->daddr, param, buf);
 	default:
-		return iscsi_conn_get_param(cls_conn, param, buf);
+		return -ENOSYS;
 	}
 	return len;
 }
-EXPORT_SYMBOL_GPL(cxgbi_get_conn_param);
+EXPORT_SYMBOL_GPL(cxgbi_get_ep_param);
 
 struct iscsi_cls_conn *
 cxgbi_create_conn(struct iscsi_cls_session *cls_session, u32 cid)
@@ -2302,11 +2295,6 @@ int cxgbi_bind_conn(struct iscsi_cls_session *cls_session,
 	cxgbi_conn_max_xmit_dlength(conn);
 	cxgbi_conn_max_recv_dlength(conn);
 
-	spin_lock_bh(&conn->session->lock);
-	sprintf(conn->portal_address, "%pI4", &csk->daddr.sin_addr.s_addr);
-	conn->portal_port = ntohs(csk->daddr.sin_port);
-	spin_unlock_bh(&conn->session->lock);
-
 	log_debug(1 << CXGBI_DBG_ISCSI,
 		"cls 0x%p,0x%p, ep 0x%p, cconn 0x%p, csk 0x%p.\n",
 		cls_session, cls_conn, ep, cconn, csk);
diff --git a/drivers/scsi/cxgbi/libcxgbi.h b/drivers/scsi/cxgbi/libcxgbi.h
index c57d59db000c..0a20fd5f7102 100644
--- a/drivers/scsi/cxgbi/libcxgbi.h
+++ b/drivers/scsi/cxgbi/libcxgbi.h
@@ -131,7 +131,6 @@ struct cxgbi_ddp_info {
 	unsigned int rsvd_tag_mask;
 	spinlock_t map_lock;
 	struct cxgbi_gather_list **gl_map;
-	struct sk_buff **gl_skb;
 };
 
 #define DDP_PGIDX_MAX		4
@@ -536,8 +535,6 @@ struct cxgbi_device {
 	struct cxgbi_ddp_info *ddp;
 
 	void (*dev_ddp_cleanup)(struct cxgbi_device *);
-	void (*csk_ddp_free_gl_skb)(struct cxgbi_ddp_info *, int, int);
-	int (*csk_ddp_alloc_gl_skb)(struct cxgbi_ddp_info *, int, int, gfp_t);
 	int (*csk_ddp_set)(struct cxgbi_sock *, struct cxgbi_pagepod_hdr *,
 				unsigned int, unsigned int,
 				struct cxgbi_gather_list *);
@@ -715,7 +712,7 @@ void cxgbi_cleanup_task(struct iscsi_task *task);
 void cxgbi_get_conn_stats(struct iscsi_cls_conn *, struct iscsi_stats *);
 int cxgbi_set_conn_param(struct iscsi_cls_conn *,
 			enum iscsi_param, char *, int);
-int cxgbi_get_conn_param(struct iscsi_cls_conn *, enum iscsi_param, char *);
+int cxgbi_get_ep_param(struct iscsi_endpoint *ep, enum iscsi_param, char *);
 struct iscsi_cls_conn *cxgbi_create_conn(struct iscsi_cls_session *, u32);
 int cxgbi_bind_conn(struct iscsi_cls_session *,
 			struct iscsi_cls_conn *, u64, int);
diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c
index b837c5b3c8f9..564e6ecd17c2 100644
--- a/drivers/scsi/device_handler/scsi_dh.c
+++ b/drivers/scsi/device_handler/scsi_dh.c
@@ -25,16 +25,9 @@
 #include <scsi/scsi_dh.h>
 #include "../scsi_priv.h"
 
-struct scsi_dh_devinfo_list {
-	struct list_head node;
-	char vendor[9];
-	char model[17];
-	struct scsi_device_handler *handler;
-};
-
 static DEFINE_SPINLOCK(list_lock);
 static LIST_HEAD(scsi_dh_list);
-static LIST_HEAD(scsi_dh_dev_list);
+static int scsi_dh_list_idx = 1;
 
 static struct scsi_device_handler *get_device_handler(const char *name)
 {
@@ -51,40 +44,18 @@ static struct scsi_device_handler *get_device_handler(const char *name)
 	return found;
 }
 
-
-static struct scsi_device_handler *
-scsi_dh_cache_lookup(struct scsi_device *sdev)
+static struct scsi_device_handler *get_device_handler_by_idx(int idx)
 {
-	struct scsi_dh_devinfo_list *tmp;
-	struct scsi_device_handler *found_dh = NULL;
+	struct scsi_device_handler *tmp, *found = NULL;
 
 	spin_lock(&list_lock);
-	list_for_each_entry(tmp, &scsi_dh_dev_list, node) {
-		if (!strncmp(sdev->vendor, tmp->vendor, strlen(tmp->vendor)) &&
-		    !strncmp(sdev->model, tmp->model, strlen(tmp->model))) {
-			found_dh = tmp->handler;
+	list_for_each_entry(tmp, &scsi_dh_list, list) {
+		if (tmp->idx == idx) {
+			found = tmp;
 			break;
 		}
 	}
 	spin_unlock(&list_lock);
-
-	return found_dh;
-}
-
-static int scsi_dh_handler_lookup(struct scsi_device_handler *scsi_dh,
-				  struct scsi_device *sdev)
-{
-	int i, found = 0;
-
-	for(i = 0; scsi_dh->devlist[i].vendor; i++) {
-		if (!strncmp(sdev->vendor, scsi_dh->devlist[i].vendor,
-			     strlen(scsi_dh->devlist[i].vendor)) &&
-		    !strncmp(sdev->model, scsi_dh->devlist[i].model,
-			     strlen(scsi_dh->devlist[i].model))) {
-			found = 1;
-			break;
-		}
-	}
 	return found;
 }
 
@@ -102,41 +73,14 @@ device_handler_match(struct scsi_device_handler *scsi_dh,
 		     struct scsi_device *sdev)
 {
 	struct scsi_device_handler *found_dh = NULL;
-	struct scsi_dh_devinfo_list *tmp;
+	int idx;
 
-	found_dh = scsi_dh_cache_lookup(sdev);
-	if (found_dh)
-		return found_dh;
+	idx = scsi_get_device_flags_keyed(sdev, sdev->vendor, sdev->model,
+					  SCSI_DEVINFO_DH);
+	found_dh = get_device_handler_by_idx(idx);
 
-	if (scsi_dh) {
-		if (scsi_dh_handler_lookup(scsi_dh, sdev))
-			found_dh = scsi_dh;
-	} else {
-		struct scsi_device_handler *tmp_dh;
-
-		spin_lock(&list_lock);
-		list_for_each_entry(tmp_dh, &scsi_dh_list, list) {
-			if (scsi_dh_handler_lookup(tmp_dh, sdev))
-				found_dh = tmp_dh;
-		}
-		spin_unlock(&list_lock);
-	}
-
-	if (found_dh) { /* If device is found, add it to the cache */
-		tmp = kmalloc(sizeof(*tmp), GFP_KERNEL);
-		if (tmp) {
-			strncpy(tmp->vendor, sdev->vendor, 8);
-			strncpy(tmp->model, sdev->model, 16);
-			tmp->vendor[8] = '\0';
-			tmp->model[16] = '\0';
-			tmp->handler = found_dh;
-			spin_lock(&list_lock);
-			list_add(&tmp->node, &scsi_dh_dev_list);
-			spin_unlock(&list_lock);
-		} else {
-			found_dh = NULL;
-		}
-	}
+	if (scsi_dh && found_dh != scsi_dh)
+		found_dh = NULL;
 
 	return found_dh;
 }
@@ -373,12 +317,25 @@ static int scsi_dh_notifier_remove(struct device *dev, void *data)
  */
 int scsi_register_device_handler(struct scsi_device_handler *scsi_dh)
 {
+	int i;
+
 	if (get_device_handler(scsi_dh->name))
 		return -EBUSY;
 
 	spin_lock(&list_lock);
+	scsi_dh->idx = scsi_dh_list_idx++;
 	list_add(&scsi_dh->list, &scsi_dh_list);
 	spin_unlock(&list_lock);
+
+	for (i = 0; scsi_dh->devlist[i].vendor; i++) {
+		scsi_dev_info_list_add_keyed(0,
+					scsi_dh->devlist[i].vendor,
+					scsi_dh->devlist[i].model,
+					NULL,
+					scsi_dh->idx,
+					SCSI_DEVINFO_DH);
+	}
+
 	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh, scsi_dh_notifier_add);
 	printk(KERN_INFO "%s: device handler registered\n", scsi_dh->name);
 
@@ -395,7 +352,7 @@ EXPORT_SYMBOL_GPL(scsi_register_device_handler);
  */
 int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 {
-	struct scsi_dh_devinfo_list *tmp, *pos;
+	int i;
 
 	if (!get_device_handler(scsi_dh->name))
 		return -ENODEV;
@@ -403,14 +360,14 @@ int scsi_unregister_device_handler(struct scsi_device_handler *scsi_dh)
 	bus_for_each_dev(&scsi_bus_type, NULL, scsi_dh,
 			 scsi_dh_notifier_remove);
 
+	for (i = 0; scsi_dh->devlist[i].vendor; i++) {
+		scsi_dev_info_list_del_keyed(scsi_dh->devlist[i].vendor,
+					     scsi_dh->devlist[i].model,
+					     SCSI_DEVINFO_DH);
+	}
+
 	spin_lock(&list_lock);
 	list_del(&scsi_dh->list);
-	list_for_each_entry_safe(pos, tmp, &scsi_dh_dev_list, node) {
-		if (pos->handler == scsi_dh) {
-			list_del(&pos->node);
-			kfree(pos);
-		}
-	}
 	spin_unlock(&list_lock);
 	printk(KERN_INFO "%s: device handler unregistered\n", scsi_dh->name);
 
@@ -576,6 +533,10 @@ static int __init scsi_dh_init(void)
 {
 	int r;
 
+	r = scsi_dev_info_add_list(SCSI_DEVINFO_DH, "SCSI Device Handler");
+	if (r)
+		return r;
+
 	r = bus_register_notifier(&scsi_bus_type, &scsi_dh_nb);
 
 	if (!r)
@@ -590,6 +551,7 @@ static void __exit scsi_dh_exit(void)
 	bus_for_each_dev(&scsi_bus_type, NULL, NULL,
 			 scsi_dh_sysfs_attr_remove);
 	bus_unregister_notifier(&scsi_bus_type, &scsi_dh_nb);
+	scsi_dev_info_remove_list(SCSI_DEVINFO_DH);
 }
 
 module_init(scsi_dh_init);
diff --git a/drivers/scsi/device_handler/scsi_dh_alua.c b/drivers/scsi/device_handler/scsi_dh_alua.c
index 6b729324b8d3..7cae0bc85390 100644
--- a/drivers/scsi/device_handler/scsi_dh_alua.c
+++ b/drivers/scsi/device_handler/scsi_dh_alua.c
@@ -253,13 +253,15 @@ static void stpg_endio(struct request *req, int error)
 {
 	struct alua_dh_data *h = req->end_io_data;
 	struct scsi_sense_hdr sense_hdr;
-	unsigned err = SCSI_DH_IO;
+	unsigned err = SCSI_DH_OK;
 
 	if (error || host_byte(req->errors) != DID_OK ||
-			msg_byte(req->errors) != COMMAND_COMPLETE)
+			msg_byte(req->errors) != COMMAND_COMPLETE) {
+		err = SCSI_DH_IO;
 		goto done;
+	}
 
-	if (err == SCSI_DH_IO && h->senselen > 0) {
+	if (h->senselen > 0) {
 		err = scsi_normalize_sense(h->sense, SCSI_SENSE_BUFFERSIZE,
 					   &sense_hdr);
 		if (!err) {
@@ -285,7 +287,8 @@ static void stpg_endio(struct request *req, int error)
 			    print_alua_state(h->state));
 	}
 done:
-	blk_put_request(req);
+	req->end_io_data = NULL;
+	__blk_put_request(req->q, req);
 	if (h->callback_fn) {
 		h->callback_fn(h->callback_data, err);
 		h->callback_fn = h->callback_data = NULL;
@@ -303,7 +306,6 @@ done:
 static unsigned submit_stpg(struct alua_dh_data *h)
 {
 	struct request *rq;
-	int err = SCSI_DH_RES_TEMP_UNAVAIL;
 	int stpg_len = 8;
 	struct scsi_device *sdev = h->sdev;
 
@@ -332,7 +334,7 @@ static unsigned submit_stpg(struct alua_dh_data *h)
 	rq->end_io_data = h;
 
 	blk_execute_rq_nowait(rq->q, NULL, rq, 1, stpg_endio);
-	return err;
+	return SCSI_DH_OK;
 }
 
 /*
@@ -730,7 +732,9 @@ static const struct scsi_dh_devlist alua_dev_list[] = {
 	{"Pillar", "Axiom" },
 	{"Intel", "Multi-Flex"},
 	{"NETAPP", "LUN"},
+	{"NETAPP", "LUN C-Mode"},
 	{"AIX", "NVDISK"},
+	{"Promise", "VTrak"},
 	{NULL, NULL}
 };
 
@@ -759,7 +763,7 @@ static int alua_bus_attach(struct scsi_device *sdev)
 	unsigned long flags;
 	int err = SCSI_DH_OK;
 
-	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
 			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
 		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
diff --git a/drivers/scsi/device_handler/scsi_dh_emc.c b/drivers/scsi/device_handler/scsi_dh_emc.c
index 6faf472f7537..48441f6908a4 100644
--- a/drivers/scsi/device_handler/scsi_dh_emc.c
+++ b/drivers/scsi/device_handler/scsi_dh_emc.c
@@ -650,7 +650,7 @@ static int clariion_bus_attach(struct scsi_device *sdev)
 	unsigned long flags;
 	int err;
 
-	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
 			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
 		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
diff --git a/drivers/scsi/device_handler/scsi_dh_hp_sw.c b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
index e3916641e627..b479f1eef968 100644
--- a/drivers/scsi/device_handler/scsi_dh_hp_sw.c
+++ b/drivers/scsi/device_handler/scsi_dh_hp_sw.c
@@ -225,7 +225,8 @@ static void start_stop_endio(struct request *req, int error)
 		}
 	}
 done:
-	blk_put_request(req);
+	req->end_io_data = NULL;
+	__blk_put_request(req->q, req);
 	if (h->callback_fn) {
 		h->callback_fn(h->callback_data, err);
 		h->callback_fn = h->callback_data = NULL;
@@ -338,8 +339,8 @@ static int hp_sw_bus_attach(struct scsi_device *sdev)
 	unsigned long flags;
 	int ret;
 
-	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
-			       + sizeof(struct hp_sw_dh_data) , GFP_KERNEL);
+	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
+			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
 		sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
 			    HP_SW_NAME);
diff --git a/drivers/scsi/device_handler/scsi_dh_rdac.c b/drivers/scsi/device_handler/scsi_dh_rdac.c
index 5be3ae15cb71..f468b05cfaac 100644
--- a/drivers/scsi/device_handler/scsi_dh_rdac.c
+++ b/drivers/scsi/device_handler/scsi_dh_rdac.c
@@ -281,11 +281,13 @@ static struct request *get_rdac_req(struct scsi_device *sdev,
 }
 
 static struct request *rdac_failover_get(struct scsi_device *sdev,
-					 struct rdac_dh_data *h)
+			struct rdac_dh_data *h, struct list_head *list)
 {
 	struct request *rq;
 	struct rdac_mode_common *common;
 	unsigned data_size;
+	struct rdac_queue_data *qdata;
+	u8 *lun_table;
 
 	if (h->ctlr->use_ms10) {
 		struct rdac_pg_expanded *rdac_pg;
@@ -298,6 +300,7 @@ static struct request *rdac_failover_get(struct scsi_device *sdev,
 		rdac_pg->subpage_code = 0x1;
 		rdac_pg->page_len[0] = 0x01;
 		rdac_pg->page_len[1] = 0x28;
+		lun_table = rdac_pg->lun_table;
 	} else {
 		struct rdac_pg_legacy *rdac_pg;
 
@@ -307,11 +310,16 @@ static struct request *rdac_failover_get(struct scsi_device *sdev,
 		common = &rdac_pg->common;
 		rdac_pg->page_code = RDAC_PAGE_CODE_REDUNDANT_CONTROLLER;
 		rdac_pg->page_len = 0x68;
+		lun_table = rdac_pg->lun_table;
 	}
 	common->rdac_mode[1] = RDAC_MODE_TRANSFER_SPECIFIED_LUNS;
 	common->quiescence_timeout = RDAC_QUIESCENCE_TIME;
 	common->rdac_options = RDAC_FORCED_QUIESENCE;
 
+	list_for_each_entry(qdata, list, entry) {
+		lun_table[qdata->h->lun] = 0x81;
+	}
+
 	/* get request for block layer packet command */
 	rq = get_rdac_req(sdev, &h->ctlr->mode_select, data_size, WRITE);
 	if (!rq)
@@ -565,7 +573,6 @@ static void send_mode_select(struct work_struct *work)
 	int err, retry_cnt = RDAC_RETRY_COUNT;
 	struct rdac_queue_data *tmp, *qdata;
 	LIST_HEAD(list);
-	u8 *lun_table;
 
 	spin_lock(&ctlr->ms_lock);
 	list_splice_init(&ctlr->ms_head, &list);
@@ -573,21 +580,12 @@ static void send_mode_select(struct work_struct *work)
 	ctlr->ms_sdev = NULL;
 	spin_unlock(&ctlr->ms_lock);
 
-	if (ctlr->use_ms10)
-		lun_table = ctlr->mode_select.expanded.lun_table;
-	else
-		lun_table = ctlr->mode_select.legacy.lun_table;
-
 retry:
 	err = SCSI_DH_RES_TEMP_UNAVAIL;
-	rq = rdac_failover_get(sdev, h);
+	rq = rdac_failover_get(sdev, h, &list);
 	if (!rq)
 		goto done;
 
-	list_for_each_entry(qdata, &list, entry) {
-		lun_table[qdata->h->lun] = 0x81;
-	}
-
 	RDAC_LOG(RDAC_LOG_FAILOVER, sdev, "array %s, ctlr %d, "
 		"%s MODE_SELECT command",
 		(char *) h->ctlr->array_name, h->ctlr->index,
@@ -800,7 +798,7 @@ static int rdac_bus_attach(struct scsi_device *sdev)
 	int err;
 	char array_name[ARRAY_LABEL_LEN];
 
-	scsi_dh_data = kzalloc(sizeof(struct scsi_device_handler *)
+	scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
 			       + sizeof(*h) , GFP_KERNEL);
 	if (!scsi_dh_data) {
 		sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
@@ -906,4 +904,5 @@ module_exit(rdac_exit);
 
 MODULE_DESCRIPTION("Multipath LSI/Engenio RDAC driver");
 MODULE_AUTHOR("Mike Christie, Chandra Seetharaman");
+MODULE_VERSION("01.00.0000.0000");
 MODULE_LICENSE("GPL");
diff --git a/drivers/scsi/fcoe/Makefile b/drivers/scsi/fcoe/Makefile
index 950f27615c76..f6d37d0271f7 100644
--- a/drivers/scsi/fcoe/Makefile
+++ b/drivers/scsi/fcoe/Makefile
@@ -1,2 +1,4 @@
 obj-$(CONFIG_FCOE) += fcoe.o
 obj-$(CONFIG_LIBFCOE) += libfcoe.o
+
+libfcoe-objs := fcoe_ctlr.o fcoe_transport.o
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 9f9600b67001..495456fe4520 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -31,6 +31,7 @@
 #include <linux/fs.h>
 #include <linux/sysfs.h>
 #include <linux/ctype.h>
+#include <linux/workqueue.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/scsicam.h>
 #include <scsi/scsi_transport.h>
@@ -58,6 +59,8 @@ MODULE_PARM_DESC(ddp_min, "Minimum I/O size in bytes for "	\
 
 DEFINE_MUTEX(fcoe_config_mutex);
 
+static struct workqueue_struct *fcoe_wq;
+
 /* fcoe_percpu_clean completion.  Waiter protected by fcoe_create_mutex */
 static DECLARE_COMPLETION(fcoe_flush_completion);
 
@@ -72,7 +75,6 @@ static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
 static int fcoe_rcv(struct sk_buff *, struct net_device *,
 		    struct packet_type *, struct net_device *);
 static int fcoe_percpu_receive_thread(void *);
-static void fcoe_clean_pending_queue(struct fc_lport *);
 static void fcoe_percpu_clean(struct fc_lport *);
 static int fcoe_link_speed_update(struct fc_lport *);
 static int fcoe_link_ok(struct fc_lport *);
@@ -80,7 +82,6 @@ static int fcoe_link_ok(struct fc_lport *);
 static struct fc_lport *fcoe_hostlist_lookup(const struct net_device *);
 static int fcoe_hostlist_add(const struct fc_lport *);
 
-static void fcoe_check_wait_queue(struct fc_lport *, struct sk_buff *);
 static int fcoe_device_notification(struct notifier_block *, ulong, void *);
 static void fcoe_dev_setup(void);
 static void fcoe_dev_cleanup(void);
@@ -101,10 +102,11 @@ static int fcoe_ddp_done(struct fc_lport *, u16);
 
 static int fcoe_cpu_callback(struct notifier_block *, unsigned long, void *);
 
-static int fcoe_create(const char *, struct kernel_param *);
-static int fcoe_destroy(const char *, struct kernel_param *);
-static int fcoe_enable(const char *, struct kernel_param *);
-static int fcoe_disable(const char *, struct kernel_param *);
+static bool fcoe_match(struct net_device *netdev);
+static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode);
+static int fcoe_destroy(struct net_device *netdev);
+static int fcoe_enable(struct net_device *netdev);
+static int fcoe_disable(struct net_device *netdev);
 
 static struct fc_seq *fcoe_elsct_send(struct fc_lport *,
 				      u32 did, struct fc_frame *,
@@ -117,24 +119,6 @@ static void fcoe_recv_frame(struct sk_buff *skb);
 
 static void fcoe_get_lesb(struct fc_lport *, struct fc_els_lesb *);
 
-module_param_call(create, fcoe_create, NULL, (void *)FIP_MODE_FABRIC, S_IWUSR);
-__MODULE_PARM_TYPE(create, "string");
-MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface");
-module_param_call(create_vn2vn, fcoe_create, NULL,
-		  (void *)FIP_MODE_VN2VN, S_IWUSR);
-__MODULE_PARM_TYPE(create_vn2vn, "string");
-MODULE_PARM_DESC(create_vn2vn, " Creates a VN_node to VN_node FCoE instance "
-		 "on an Ethernet interface");
-module_param_call(destroy, fcoe_destroy, NULL, NULL, S_IWUSR);
-__MODULE_PARM_TYPE(destroy, "string");
-MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface");
-module_param_call(enable, fcoe_enable, NULL, NULL, S_IWUSR);
-__MODULE_PARM_TYPE(enable, "string");
-MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface.");
-module_param_call(disable, fcoe_disable, NULL, NULL, S_IWUSR);
-__MODULE_PARM_TYPE(disable, "string");
-MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface.");
-
 /* notification function for packets from net device */
 static struct notifier_block fcoe_notifier = {
 	.notifier_call = fcoe_device_notification,
@@ -145,8 +129,8 @@ static struct notifier_block fcoe_cpu_notifier = {
 	.notifier_call = fcoe_cpu_callback,
 };
 
-static struct scsi_transport_template *fcoe_transport_template;
-static struct scsi_transport_template *fcoe_vport_transport_template;
+static struct scsi_transport_template *fcoe_nport_scsi_transport;
+static struct scsi_transport_template *fcoe_vport_scsi_transport;
 
 static int fcoe_vport_destroy(struct fc_vport *);
 static int fcoe_vport_create(struct fc_vport *, bool disabled);
@@ -163,7 +147,7 @@ static struct libfc_function_template fcoe_libfc_fcn_templ = {
 	.lport_set_port_id = fcoe_set_port_id,
 };
 
-struct fc_function_template fcoe_transport_function = {
+struct fc_function_template fcoe_nport_fc_functions = {
 	.show_host_node_name = 1,
 	.show_host_port_name = 1,
 	.show_host_supported_classes = 1,
@@ -203,7 +187,7 @@ struct fc_function_template fcoe_transport_function = {
 	.bsg_request = fc_lport_bsg_request,
 };
 
-struct fc_function_template fcoe_vport_transport_function = {
+struct fc_function_template fcoe_vport_fc_functions = {
 	.show_host_node_name = 1,
 	.show_host_port_name = 1,
 	.show_host_supported_classes = 1,
@@ -356,10 +340,18 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev,
 	struct fcoe_interface *fcoe;
 	int err;
 
+	if (!try_module_get(THIS_MODULE)) {
+		FCOE_NETDEV_DBG(netdev,
+				"Could not get a reference to the module\n");
+		fcoe = ERR_PTR(-EBUSY);
+		goto out;
+	}
+
 	fcoe = kzalloc(sizeof(*fcoe), GFP_KERNEL);
 	if (!fcoe) {
 		FCOE_NETDEV_DBG(netdev, "Could not allocate fcoe structure\n");
-		return NULL;
+		fcoe = ERR_PTR(-ENOMEM);
+		goto out_nomod;
 	}
 
 	dev_hold(netdev);
@@ -378,9 +370,15 @@ static struct fcoe_interface *fcoe_interface_create(struct net_device *netdev,
 		fcoe_ctlr_destroy(&fcoe->ctlr);
 		kfree(fcoe);
 		dev_put(netdev);
-		return NULL;
+		fcoe = ERR_PTR(err);
+		goto out_nomod;
 	}
 
+	goto out;
+
+out_nomod:
+	module_put(THIS_MODULE);
+out:
 	return fcoe;
 }
 
@@ -442,6 +440,7 @@ static void fcoe_interface_release(struct kref *kref)
 	fcoe_ctlr_destroy(&fcoe->ctlr);
 	kfree(fcoe);
 	dev_put(netdev);
+	module_put(THIS_MODULE);
 }
 
 /**
@@ -505,7 +504,7 @@ static void fcoe_fip_send(struct fcoe_ctlr *fip, struct sk_buff *skb)
 static void fcoe_update_src_mac(struct fc_lport *lport, u8 *addr)
 {
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 
 	rtnl_lock();
 	if (!is_zero_ether_addr(port->data_src_addr))
@@ -561,17 +560,6 @@ static int fcoe_lport_config(struct fc_lport *lport)
 }
 
 /**
- * fcoe_queue_timer() - The fcoe queue timer
- * @lport: The local port
- *
- * Calls fcoe_check_wait_queue on timeout
- */
-static void fcoe_queue_timer(ulong lport)
-{
-	fcoe_check_wait_queue((struct fc_lport *)lport, NULL);
-}
-
-/**
  * fcoe_get_wwn() - Get the world wide name from LLD if it supports it
  * @netdev: the associated net device
  * @wwn: the output WWN
@@ -650,7 +638,7 @@ static int fcoe_netdev_config(struct fc_lport *lport, struct net_device *netdev)
 
 	/* Setup lport private data to point to fcoe softc */
 	port = lport_priv(lport);
-	fcoe = port->fcoe;
+	fcoe = port->priv;
 
 	/*
 	 * Determine max frame size based on underlying device and optional
@@ -708,9 +696,9 @@ static int fcoe_shost_config(struct fc_lport *lport, struct device *dev)
 	lport->host->max_cmd_len = FCOE_MAX_CMD_LEN;
 
 	if (lport->vport)
-		lport->host->transportt = fcoe_vport_transport_template;
+		lport->host->transportt = fcoe_vport_scsi_transport;
 	else
-		lport->host->transportt = fcoe_transport_template;
+		lport->host->transportt = fcoe_nport_scsi_transport;
 
 	/* add the new host to the SCSI-ml */
 	rc = scsi_add_host(lport->host, dev);
@@ -760,7 +748,7 @@ bool fcoe_oem_match(struct fc_frame *fp)
 static inline int fcoe_em_config(struct fc_lport *lport)
 {
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 	struct fcoe_interface *oldfcoe = NULL;
 	struct net_device *old_real_dev, *cur_real_dev;
 	u16 min_xid = FCOE_MIN_XID;
@@ -844,7 +832,7 @@ skip_oem:
 static void fcoe_if_destroy(struct fc_lport *lport)
 {
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 	struct net_device *netdev = fcoe->netdev;
 
 	FCOE_NETDEV_DBG(netdev, "Destroying interface\n");
@@ -886,7 +874,6 @@ static void fcoe_if_destroy(struct fc_lport *lport)
 
 	/* Release the Scsi_Host */
 	scsi_host_put(lport->host);
-	module_put(THIS_MODULE);
 }
 
 /**
@@ -966,7 +953,9 @@ static struct fc_lport *fcoe_if_create(struct fcoe_interface *fcoe,
 	}
 	port = lport_priv(lport);
 	port->lport = lport;
-	port->fcoe = fcoe;
+	port->priv = fcoe;
+	port->max_queue_depth = FCOE_MAX_QUEUE_DEPTH;
+	port->min_queue_depth = FCOE_MIN_QUEUE_DEPTH;
 	INIT_WORK(&port->destroy_work, fcoe_destroy_work);
 
 	/* configure a fc_lport including the exchange manager */
@@ -1050,11 +1039,12 @@ out:
 static int __init fcoe_if_init(void)
 {
 	/* attach to scsi transport */
-	fcoe_transport_template = fc_attach_transport(&fcoe_transport_function);
-	fcoe_vport_transport_template =
-		fc_attach_transport(&fcoe_vport_transport_function);
+	fcoe_nport_scsi_transport =
+		fc_attach_transport(&fcoe_nport_fc_functions);
+	fcoe_vport_scsi_transport =
+		fc_attach_transport(&fcoe_vport_fc_functions);
 
-	if (!fcoe_transport_template) {
+	if (!fcoe_nport_scsi_transport) {
 		printk(KERN_ERR "fcoe: Failed to attach to the FC transport\n");
 		return -ENODEV;
 	}
@@ -1071,10 +1061,10 @@ static int __init fcoe_if_init(void)
  */
 int __exit fcoe_if_exit(void)
 {
-	fc_release_transport(fcoe_transport_template);
-	fc_release_transport(fcoe_vport_transport_template);
-	fcoe_transport_template = NULL;
-	fcoe_vport_transport_template = NULL;
+	fc_release_transport(fcoe_nport_scsi_transport);
+	fc_release_transport(fcoe_vport_scsi_transport);
+	fcoe_nport_scsi_transport = NULL;
+	fcoe_vport_scsi_transport = NULL;
 	return 0;
 }
 
@@ -1361,108 +1351,22 @@ err2:
 }
 
 /**
- * fcoe_start_io() - Start FCoE I/O
- * @skb: The packet to be transmitted
- *
- * This routine is called from the net device to start transmitting
- * FCoE packets.
- *
- * Returns: 0 for success
- */
-static inline int fcoe_start_io(struct sk_buff *skb)
-{
-	struct sk_buff *nskb;
-	int rc;
-
-	nskb = skb_clone(skb, GFP_ATOMIC);
-	rc = dev_queue_xmit(nskb);
-	if (rc != 0)
-		return rc;
-	kfree_skb(skb);
-	return 0;
-}
-
-/**
- * fcoe_get_paged_crc_eof() - Allocate a page to be used for the trailer CRC
+ * fcoe_alloc_paged_crc_eof() - Allocate a page to be used for the trailer CRC
  * @skb:  The packet to be transmitted
  * @tlen: The total length of the trailer
  *
- * This routine allocates a page for frame trailers. The page is re-used if
- * there is enough room left on it for the current trailer. If there isn't
- * enough buffer left a new page is allocated for the trailer. Reference to
- * the page from this function as well as the skbs using the page fragments
- * ensure that the page is freed at the appropriate time.
- *
  * Returns: 0 for success
  */
-static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
+static int fcoe_alloc_paged_crc_eof(struct sk_buff *skb, int tlen)
 {
 	struct fcoe_percpu_s *fps;
-	struct page *page;
+	int rc;
 
 	fps = &get_cpu_var(fcoe_percpu);
-	page = fps->crc_eof_page;
-	if (!page) {
-		page = alloc_page(GFP_ATOMIC);
-		if (!page) {
-			put_cpu_var(fcoe_percpu);
-			return -ENOMEM;
-		}
-		fps->crc_eof_page = page;
-		fps->crc_eof_offset = 0;
-	}
-
-	get_page(page);
-	skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, page,
-			   fps->crc_eof_offset, tlen);
-	skb->len += tlen;
-	skb->data_len += tlen;
-	skb->truesize += tlen;
-	fps->crc_eof_offset += sizeof(struct fcoe_crc_eof);
-
-	if (fps->crc_eof_offset >= PAGE_SIZE) {
-		fps->crc_eof_page = NULL;
-		fps->crc_eof_offset = 0;
-		put_page(page);
-	}
+	rc = fcoe_get_paged_crc_eof(skb, tlen, fps);
 	put_cpu_var(fcoe_percpu);
-	return 0;
-}
 
-/**
- * fcoe_fc_crc() - Calculates the CRC for a given frame
- * @fp: The frame to be checksumed
- *
- * This uses crc32() routine to calculate the CRC for a frame
- *
- * Return: The 32 bit CRC value
- */
-u32 fcoe_fc_crc(struct fc_frame *fp)
-{
-	struct sk_buff *skb = fp_skb(fp);
-	struct skb_frag_struct *frag;
-	unsigned char *data;
-	unsigned long off, len, clen;
-	u32 crc;
-	unsigned i;
-
-	crc = crc32(~0, skb->data, skb_headlen(skb));
-
-	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
-		frag = &skb_shinfo(skb)->frags[i];
-		off = frag->page_offset;
-		len = frag->size;
-		while (len > 0) {
-			clen = min(len, PAGE_SIZE - (off & ~PAGE_MASK));
-			data = kmap_atomic(frag->page + (off >> PAGE_SHIFT),
-					   KM_SKB_DATA_SOFTIRQ);
-			crc = crc32(crc, data + (off & ~PAGE_MASK), clen);
-			kunmap_atomic(data, KM_SKB_DATA_SOFTIRQ);
-			off += clen;
-			len -= clen;
-		}
-	}
-	return crc;
+	return rc;
 }
 
 /**
@@ -1485,7 +1389,7 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
 	unsigned int tlen;		/* trailer length */
 	unsigned int elen;		/* eth header, may include vlan */
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 	u8 sof, eof;
 	struct fcoe_hdr *hp;
 
@@ -1526,7 +1430,7 @@ int fcoe_xmit(struct fc_lport *lport, struct fc_frame *fp)
 	/* copy port crc and eof to the skb buff */
 	if (skb_is_nonlinear(skb)) {
 		skb_frag_t *frag;
-		if (fcoe_get_paged_crc_eof(skb, tlen)) {
+		if (fcoe_alloc_paged_crc_eof(skb, tlen)) {
 			kfree_skb(skb);
 			return -ENOMEM;
 		}
@@ -1606,6 +1510,56 @@ static void fcoe_percpu_flush_done(struct sk_buff *skb)
 }
 
 /**
+ * fcoe_filter_frames() - filter out bad fcoe frames, i.e. bad CRC
+ * @lport: The local port the frame was received on
+ * @fp:	   The received frame
+ *
+ * Return: 0 on passing filtering checks
+ */
+static inline int fcoe_filter_frames(struct fc_lport *lport,
+				     struct fc_frame *fp)
+{
+	struct fcoe_interface *fcoe;
+	struct fc_frame_header *fh;
+	struct sk_buff *skb = (struct sk_buff *)fp;
+	struct fcoe_dev_stats *stats;
+
+	/*
+	 * We only check CRC if no offload is available and if it is
+	 * it's solicited data, in which case, the FCP layer would
+	 * check it during the copy.
+	 */
+	if (lport->crc_offload && skb->ip_summed == CHECKSUM_UNNECESSARY)
+		fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
+	else
+		fr_flags(fp) |= FCPHF_CRC_UNCHECKED;
+
+	fh = (struct fc_frame_header *) skb_transport_header(skb);
+	fh = fc_frame_header_get(fp);
+	if (fh->fh_r_ctl == FC_RCTL_DD_SOL_DATA && fh->fh_type == FC_TYPE_FCP)
+		return 0;
+
+	fcoe = ((struct fcoe_port *)lport_priv(lport))->priv;
+	if (is_fip_mode(&fcoe->ctlr) && fc_frame_payload_op(fp) == ELS_LOGO &&
+	    ntoh24(fh->fh_s_id) == FC_FID_FLOGI) {
+		FCOE_DBG("fcoe: dropping FCoE lport LOGO in fip mode\n");
+		return -EINVAL;
+	}
+
+	if (!fr_flags(fp) & FCPHF_CRC_UNCHECKED ||
+	    le32_to_cpu(fr_crc(fp)) == ~crc32(~0, skb->data, skb->len)) {
+		fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
+		return 0;
+	}
+
+	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
+	stats->InvalidCRCCount++;
+	if (stats->InvalidCRCCount < 5)
+		printk(KERN_WARNING "fcoe: dropping frame with CRC error\n");
+	return -EINVAL;
+}
+
+/**
  * fcoe_recv_frame() - process a single received frame
  * @skb: frame to process
  */
@@ -1615,7 +1569,6 @@ static void fcoe_recv_frame(struct sk_buff *skb)
 	struct fc_lport *lport;
 	struct fcoe_rcv_info *fr;
 	struct fcoe_dev_stats *stats;
-	struct fc_frame_header *fh;
 	struct fcoe_crc_eof crc_eof;
 	struct fc_frame *fp;
 	struct fcoe_port *port;
@@ -1646,7 +1599,6 @@ static void fcoe_recv_frame(struct sk_buff *skb)
 	 * was done in fcoe_rcv already.
 	 */
 	hp = (struct fcoe_hdr *) skb_network_header(skb);
-	fh = (struct fc_frame_header *) skb_transport_header(skb);
 
 	stats = per_cpu_ptr(lport->dev_stats, get_cpu());
 	if (unlikely(FC_FCOE_DECAPS_VER(hp) != FC_FCOE_VER)) {
@@ -1679,35 +1631,11 @@ static void fcoe_recv_frame(struct sk_buff *skb)
 	if (pskb_trim(skb, fr_len))
 		goto drop;
 
-	/*
-	 * We only check CRC if no offload is available and if it is
-	 * it's solicited data, in which case, the FCP layer would
-	 * check it during the copy.
-	 */
-	if (lport->crc_offload &&
-	    skb->ip_summed == CHECKSUM_UNNECESSARY)
-		fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
-	else
-		fr_flags(fp) |= FCPHF_CRC_UNCHECKED;
-
-	fh = fc_frame_header_get(fp);
-	if ((fh->fh_r_ctl != FC_RCTL_DD_SOL_DATA ||
-	    fh->fh_type != FC_TYPE_FCP) &&
-	    (fr_flags(fp) & FCPHF_CRC_UNCHECKED)) {
-		if (le32_to_cpu(fr_crc(fp)) !=
-		    ~crc32(~0, skb->data, fr_len)) {
-			if (stats->InvalidCRCCount < 5)
-				printk(KERN_WARNING "fcoe: dropping "
-				       "frame with CRC error\n");
-			stats->InvalidCRCCount++;
-			goto drop;
-		}
-		fr_flags(fp) &= ~FCPHF_CRC_UNCHECKED;
+	if (!fcoe_filter_frames(lport, fp)) {
+		put_cpu();
+		fc_exch_recv(lport, fp);
+		return;
 	}
-	put_cpu();
-	fc_exch_recv(lport, fp);
-	return;
-
 drop:
 	stats->ErrorFrames++;
 	put_cpu();
@@ -1746,64 +1674,6 @@ int fcoe_percpu_receive_thread(void *arg)
 }
 
 /**
- * fcoe_check_wait_queue() - Attempt to clear the transmit backlog
- * @lport: The local port whose backlog is to be cleared
- *
- * This empties the wait_queue, dequeues the head of the wait_queue queue
- * and calls fcoe_start_io() for each packet. If all skb have been
- * transmitted it returns the qlen. If an error occurs it restores
- * wait_queue (to try again later) and returns -1.
- *
- * The wait_queue is used when the skb transmit fails. The failed skb
- * will go in the wait_queue which will be emptied by the timer function or
- * by the next skb transmit.
- */
-static void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb)
-{
-	struct fcoe_port *port = lport_priv(lport);
-	int rc;
-
-	spin_lock_bh(&port->fcoe_pending_queue.lock);
-
-	if (skb)
-		__skb_queue_tail(&port->fcoe_pending_queue, skb);
-
-	if (port->fcoe_pending_queue_active)
-		goto out;
-	port->fcoe_pending_queue_active = 1;
-
-	while (port->fcoe_pending_queue.qlen) {
-		/* keep qlen > 0 until fcoe_start_io succeeds */
-		port->fcoe_pending_queue.qlen++;
-		skb = __skb_dequeue(&port->fcoe_pending_queue);
-
-		spin_unlock_bh(&port->fcoe_pending_queue.lock);
-		rc = fcoe_start_io(skb);
-		spin_lock_bh(&port->fcoe_pending_queue.lock);
-
-		if (rc) {
-			__skb_queue_head(&port->fcoe_pending_queue, skb);
-			/* undo temporary increment above */
-			port->fcoe_pending_queue.qlen--;
-			break;
-		}
-		/* undo temporary increment above */
-		port->fcoe_pending_queue.qlen--;
-	}
-
-	if (port->fcoe_pending_queue.qlen < FCOE_LOW_QUEUE_DEPTH)
-		lport->qfull = 0;
-	if (port->fcoe_pending_queue.qlen && !timer_pending(&port->timer))
-		mod_timer(&port->timer, jiffies + 2);
-	port->fcoe_pending_queue_active = 0;
-out:
-	if (port->fcoe_pending_queue.qlen > FCOE_MAX_QUEUE_DEPTH)
-		lport->qfull = 1;
-	spin_unlock_bh(&port->fcoe_pending_queue.lock);
-	return;
-}
-
-/**
  * fcoe_dev_setup() - Setup the link change notification interface
  */
 static void fcoe_dev_setup(void)
@@ -1874,7 +1744,7 @@ static int fcoe_device_notification(struct notifier_block *notifier,
 		list_del(&fcoe->list);
 		port = lport_priv(fcoe->ctlr.lp);
 		fcoe_interface_cleanup(fcoe);
-		schedule_work(&port->destroy_work);
+		queue_work(fcoe_wq, &port->destroy_work);
 		goto out;
 		break;
 	case NETDEV_FEAT_CHANGE:
@@ -1900,39 +1770,16 @@ out:
 }
 
 /**
- * fcoe_if_to_netdev() - Parse a name buffer to get a net device
- * @buffer: The name of the net device
- *
- * Returns: NULL or a ptr to net_device
- */
-static struct net_device *fcoe_if_to_netdev(const char *buffer)
-{
-	char *cp;
-	char ifname[IFNAMSIZ + 2];
-
-	if (buffer) {
-		strlcpy(ifname, buffer, IFNAMSIZ);
-		cp = ifname + strlen(ifname);
-		while (--cp >= ifname && *cp == '\n')
-			*cp = '\0';
-		return dev_get_by_name(&init_net, ifname);
-	}
-	return NULL;
-}
-
-/**
  * fcoe_disable() - Disables a FCoE interface
- * @buffer: The name of the Ethernet interface to be disabled
- * @kp:	    The associated kernel parameter
+ * @netdev  : The net_device object the Ethernet interface to create on
  *
- * Called from sysfs.
+ * Called from fcoe transport.
  *
  * Returns: 0 for success
  */
-static int fcoe_disable(const char *buffer, struct kernel_param *kp)
+static int fcoe_disable(struct net_device *netdev)
 {
 	struct fcoe_interface *fcoe;
-	struct net_device *netdev;
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
@@ -1948,16 +1795,9 @@ static int fcoe_disable(const char *buffer, struct kernel_param *kp)
 	}
 #endif
 
-	netdev = fcoe_if_to_netdev(buffer);
-	if (!netdev) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-
 	if (!rtnl_trylock()) {
-		dev_put(netdev);
 		mutex_unlock(&fcoe_config_mutex);
-		return restart_syscall();
+		return -ERESTARTSYS;
 	}
 
 	fcoe = fcoe_hostlist_lookup_port(netdev);
@@ -1969,7 +1809,6 @@ static int fcoe_disable(const char *buffer, struct kernel_param *kp)
 	} else
 		rc = -ENODEV;
 
-	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
@@ -1977,17 +1816,15 @@ out_nodev:
 
 /**
  * fcoe_enable() - Enables a FCoE interface
- * @buffer: The name of the Ethernet interface to be enabled
- * @kp:     The associated kernel parameter
+ * @netdev  : The net_device object the Ethernet interface to create on
  *
- * Called from sysfs.
+ * Called from fcoe transport.
  *
  * Returns: 0 for success
  */
-static int fcoe_enable(const char *buffer, struct kernel_param *kp)
+static int fcoe_enable(struct net_device *netdev)
 {
 	struct fcoe_interface *fcoe;
-	struct net_device *netdev;
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
@@ -2002,17 +1839,9 @@ static int fcoe_enable(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 	}
 #endif
-
-	netdev = fcoe_if_to_netdev(buffer);
-	if (!netdev) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-
 	if (!rtnl_trylock()) {
-		dev_put(netdev);
 		mutex_unlock(&fcoe_config_mutex);
-		return restart_syscall();
+		return -ERESTARTSYS;
 	}
 
 	fcoe = fcoe_hostlist_lookup_port(netdev);
@@ -2023,7 +1852,6 @@ static int fcoe_enable(const char *buffer, struct kernel_param *kp)
 	else if (!fcoe_link_ok(fcoe->ctlr.lp))
 		fcoe_ctlr_link_up(&fcoe->ctlr);
 
-	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
@@ -2031,17 +1859,15 @@ out_nodev:
 
 /**
  * fcoe_destroy() - Destroy a FCoE interface
- * @buffer: The name of the Ethernet interface to be destroyed
- * @kp:	    The associated kernel parameter
+ * @netdev  : The net_device object the Ethernet interface to create on
  *
- * Called from sysfs.
+ * Called from fcoe transport
  *
  * Returns: 0 for success
  */
-static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
+static int fcoe_destroy(struct net_device *netdev)
 {
 	struct fcoe_interface *fcoe;
-	struct net_device *netdev;
 	int rc = 0;
 
 	mutex_lock(&fcoe_config_mutex);
@@ -2056,32 +1882,21 @@ static int fcoe_destroy(const char *buffer, struct kernel_param *kp)
 		goto out_nodev;
 	}
 #endif
-
-	netdev = fcoe_if_to_netdev(buffer);
-	if (!netdev) {
-		rc = -ENODEV;
-		goto out_nodev;
-	}
-
 	if (!rtnl_trylock()) {
-		dev_put(netdev);
 		mutex_unlock(&fcoe_config_mutex);
-		return restart_syscall();
+		return -ERESTARTSYS;
 	}
 
 	fcoe = fcoe_hostlist_lookup_port(netdev);
 	if (!fcoe) {
 		rtnl_unlock();
 		rc = -ENODEV;
-		goto out_putdev;
+		goto out_nodev;
 	}
 	fcoe_interface_cleanup(fcoe);
 	list_del(&fcoe->list);
 	/* RTNL mutex is dropped by fcoe_if_destroy */
 	fcoe_if_destroy(fcoe->ctlr.lp);
-
-out_putdev:
-	dev_put(netdev);
 out_nodev:
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
@@ -2104,27 +1919,39 @@ static void fcoe_destroy_work(struct work_struct *work)
 }
 
 /**
+ * fcoe_match() - Check if the FCoE is supported on the given netdevice
+ * @netdev  : The net_device object the Ethernet interface to create on
+ *
+ * Called from fcoe transport.
+ *
+ * Returns: always returns true as this is the default FCoE transport,
+ * i.e., support all netdevs.
+ */
+static bool fcoe_match(struct net_device *netdev)
+{
+	return true;
+}
+
+/**
  * fcoe_create() - Create a fcoe interface
- * @buffer: The name of the Ethernet interface to create on
- * @kp:	    The associated kernel param
+ * @netdev  : The net_device object the Ethernet interface to create on
+ * @fip_mode: The FIP mode for this creation
  *
- * Called from sysfs.
+ * Called from fcoe transport
  *
  * Returns: 0 for success
  */
-static int fcoe_create(const char *buffer, struct kernel_param *kp)
+static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode)
 {
-	enum fip_state fip_mode = (enum fip_state)(long)kp->arg;
 	int rc;
 	struct fcoe_interface *fcoe;
 	struct fc_lport *lport;
-	struct net_device *netdev;
 
 	mutex_lock(&fcoe_config_mutex);
 
 	if (!rtnl_trylock()) {
 		mutex_unlock(&fcoe_config_mutex);
-		return restart_syscall();
+		return -ERESTARTSYS;
 	}
 
 #ifdef CONFIG_FCOE_MODULE
@@ -2135,31 +1962,20 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp)
 	 */
 	if (THIS_MODULE->state != MODULE_STATE_LIVE) {
 		rc = -ENODEV;
-		goto out_nomod;
-	}
-#endif
-
-	if (!try_module_get(THIS_MODULE)) {
-		rc = -EINVAL;
-		goto out_nomod;
-	}
-
-	netdev = fcoe_if_to_netdev(buffer);
-	if (!netdev) {
-		rc = -ENODEV;
 		goto out_nodev;
 	}
+#endif
 
 	/* look for existing lport */
 	if (fcoe_hostlist_lookup(netdev)) {
 		rc = -EEXIST;
-		goto out_putdev;
+		goto out_nodev;
 	}
 
 	fcoe = fcoe_interface_create(netdev, fip_mode);
-	if (!fcoe) {
-		rc = -ENOMEM;
-		goto out_putdev;
+	if (IS_ERR(fcoe)) {
+		rc = PTR_ERR(fcoe);
+		goto out_nodev;
 	}
 
 	lport = fcoe_if_create(fcoe, &netdev->dev, 0);
@@ -2188,18 +2004,13 @@ static int fcoe_create(const char *buffer, struct kernel_param *kp)
 	 * should be holding a reference taken in fcoe_if_create().
 	 */
 	fcoe_interface_put(fcoe);
-	dev_put(netdev);
 	rtnl_unlock();
 	mutex_unlock(&fcoe_config_mutex);
 
 	return 0;
 out_free:
 	fcoe_interface_put(fcoe);
-out_putdev:
-	dev_put(netdev);
 out_nodev:
-	module_put(THIS_MODULE);
-out_nomod:
 	rtnl_unlock();
 	mutex_unlock(&fcoe_config_mutex);
 	return rc;
@@ -2214,8 +2025,7 @@ out_nomod:
  */
 int fcoe_link_speed_update(struct fc_lport *lport)
 {
-	struct fcoe_port *port = lport_priv(lport);
-	struct net_device *netdev = port->fcoe->netdev;
+	struct net_device *netdev = fcoe_netdev(lport);
 	struct ethtool_cmd ecmd = { ETHTOOL_GSET };
 
 	if (!dev_ethtool_get_settings(netdev, &ecmd)) {
@@ -2246,8 +2056,7 @@ int fcoe_link_speed_update(struct fc_lport *lport)
  */
 int fcoe_link_ok(struct fc_lport *lport)
 {
-	struct fcoe_port *port = lport_priv(lport);
-	struct net_device *netdev = port->fcoe->netdev;
+	struct net_device *netdev = fcoe_netdev(lport);
 
 	if (netif_oper_up(netdev))
 		return 0;
@@ -2311,24 +2120,6 @@ void fcoe_percpu_clean(struct fc_lport *lport)
 }
 
 /**
- * fcoe_clean_pending_queue() - Dequeue a skb and free it
- * @lport: The local port to dequeue a skb on
- */
-void fcoe_clean_pending_queue(struct fc_lport *lport)
-{
-	struct fcoe_port  *port = lport_priv(lport);
-	struct sk_buff *skb;
-
-	spin_lock_bh(&port->fcoe_pending_queue.lock);
-	while ((skb = __skb_dequeue(&port->fcoe_pending_queue)) != NULL) {
-		spin_unlock_bh(&port->fcoe_pending_queue.lock);
-		kfree_skb(skb);
-		spin_lock_bh(&port->fcoe_pending_queue.lock);
-	}
-	spin_unlock_bh(&port->fcoe_pending_queue.lock);
-}
-
-/**
  * fcoe_reset() - Reset a local port
  * @shost: The SCSI host associated with the local port to be reset
  *
@@ -2395,12 +2186,24 @@ static int fcoe_hostlist_add(const struct fc_lport *lport)
 	fcoe = fcoe_hostlist_lookup_port(fcoe_netdev(lport));
 	if (!fcoe) {
 		port = lport_priv(lport);
-		fcoe = port->fcoe;
+		fcoe = port->priv;
 		list_add_tail(&fcoe->list, &fcoe_hostlist);
 	}
 	return 0;
 }
 
+
+static struct fcoe_transport fcoe_sw_transport = {
+	.name = {FCOE_TRANSPORT_DEFAULT},
+	.attached = false,
+	.list = LIST_HEAD_INIT(fcoe_sw_transport.list),
+	.match = fcoe_match,
+	.create = fcoe_create,
+	.destroy = fcoe_destroy,
+	.enable = fcoe_enable,
+	.disable = fcoe_disable,
+};
+
 /**
  * fcoe_init() - Initialize fcoe.ko
  *
@@ -2412,6 +2215,18 @@ static int __init fcoe_init(void)
 	unsigned int cpu;
 	int rc = 0;
 
+	fcoe_wq = alloc_workqueue("fcoe", 0, 0);
+	if (!fcoe_wq)
+		return -ENOMEM;
+
+	/* register as a fcoe transport */
+	rc = fcoe_transport_attach(&fcoe_sw_transport);
+	if (rc) {
+		printk(KERN_ERR "failed to register an fcoe transport, check "
+			"if libfcoe is loaded\n");
+		return rc;
+	}
+
 	mutex_lock(&fcoe_config_mutex);
 
 	for_each_possible_cpu(cpu) {
@@ -2442,6 +2257,7 @@ out_free:
 		fcoe_percpu_thread_destroy(cpu);
 	}
 	mutex_unlock(&fcoe_config_mutex);
+	destroy_workqueue(fcoe_wq);
 	return rc;
 }
 module_init(fcoe_init);
@@ -2467,7 +2283,7 @@ static void __exit fcoe_exit(void)
 		list_del(&fcoe->list);
 		port = lport_priv(fcoe->ctlr.lp);
 		fcoe_interface_cleanup(fcoe);
-		schedule_work(&port->destroy_work);
+		queue_work(fcoe_wq, &port->destroy_work);
 	}
 	rtnl_unlock();
 
@@ -2478,16 +2294,21 @@ static void __exit fcoe_exit(void)
 
 	mutex_unlock(&fcoe_config_mutex);
 
-	/* flush any asyncronous interface destroys,
-	 * this should happen after the netdev notifier is unregistered */
-	flush_scheduled_work();
-	/* That will flush out all the N_Ports on the hostlist, but now we
-	 * may have NPIV VN_Ports scheduled for destruction */
-	flush_scheduled_work();
+	/*
+	 * destroy_work's may be chained but destroy_workqueue()
+	 * can take care of them. Just kill the fcoe_wq.
+	 */
+	destroy_workqueue(fcoe_wq);
 
-	/* detach from scsi transport
-	 * must happen after all destroys are done, therefor after the flush */
+	/*
+	 * Detaching from the scsi transport must happen after all
+	 * destroys are done on the fcoe_wq. destroy_workqueue will
+	 * enusre the fcoe_wq is flushed.
+	 */
 	fcoe_if_exit();
+
+	/* detach from fcoe transport */
+	fcoe_transport_detach(&fcoe_sw_transport);
 }
 module_exit(fcoe_exit);
 
@@ -2559,7 +2380,7 @@ static struct fc_seq *fcoe_elsct_send(struct fc_lport *lport, u32 did,
 				      void *arg, u32 timeout)
 {
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 	struct fcoe_ctlr *fip = &fcoe->ctlr;
 	struct fc_frame_header *fh = fc_frame_header_get(fp);
 
@@ -2592,7 +2413,7 @@ static int fcoe_vport_create(struct fc_vport *vport, bool disabled)
 	struct Scsi_Host *shost = vport_to_shost(vport);
 	struct fc_lport *n_port = shost_priv(shost);
 	struct fcoe_port *port = lport_priv(n_port);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 	struct net_device *netdev = fcoe->netdev;
 	struct fc_lport *vn_port;
 
@@ -2632,7 +2453,7 @@ static int fcoe_vport_destroy(struct fc_vport *vport)
 	mutex_lock(&n_port->lp_mutex);
 	list_del(&vn_port->list);
 	mutex_unlock(&n_port->lp_mutex);
-	schedule_work(&port->destroy_work);
+	queue_work(fcoe_wq, &port->destroy_work);
 	return 0;
 }
 
@@ -2736,7 +2557,7 @@ static void fcoe_set_port_id(struct fc_lport *lport,
 			     u32 port_id, struct fc_frame *fp)
 {
 	struct fcoe_port *port = lport_priv(lport);
-	struct fcoe_interface *fcoe = port->fcoe;
+	struct fcoe_interface *fcoe = port->priv;
 
 	if (fp && fc_frame_payload_op(fp) == ELS_FLOGI)
 		fcoe_ctlr_recv_flogi(&fcoe->ctlr, lport, fp);
diff --git a/drivers/scsi/fcoe/fcoe.h b/drivers/scsi/fcoe/fcoe.h
index c69b2c56c2d1..d775128398e9 100644
--- a/drivers/scsi/fcoe/fcoe.h
+++ b/drivers/scsi/fcoe/fcoe.h
@@ -24,7 +24,7 @@
 #include <linux/kthread.h>
 
 #define FCOE_MAX_QUEUE_DEPTH	256
-#define FCOE_LOW_QUEUE_DEPTH	32
+#define FCOE_MIN_QUEUE_DEPTH	32
 
 #define FCOE_WORD_TO_BYTE	4
 
@@ -71,21 +71,6 @@ do {                                                            	\
 				  netdev->name, ##args);)
 
 /**
- * struct fcoe_percpu_s - The per-CPU context for FCoE receive threads
- * @thread:	    The thread context
- * @fcoe_rx_list:   The queue of pending packets to process
- * @page:	    The memory page for calculating frame trailer CRCs
- * @crc_eof_offset: The offset into the CRC page pointing to available
- *		    memory for a new trailer
- */
-struct fcoe_percpu_s {
-	struct task_struct *thread;
-	struct sk_buff_head fcoe_rx_list;
-	struct page *crc_eof_page;
-	int crc_eof_offset;
-};
-
-/**
  * struct fcoe_interface - A FCoE interface
  * @list:	      Handle for a list of FCoE interfaces
  * @netdev:	      The associated net device
@@ -108,30 +93,6 @@ struct fcoe_interface {
 	struct kref	   kref;
 };
 
-/**
- * struct fcoe_port - The FCoE private structure
- * @fcoe:		       The associated fcoe interface
- * @lport:		       The associated local port
- * @fcoe_pending_queue:	       The pending Rx queue of skbs
- * @fcoe_pending_queue_active: Indicates if the pending queue is active
- * @timer:		       The queue timer
- * @destroy_work:	       Handle for work context
- *			       (to prevent RTNL deadlocks)
- * @data_srt_addr:	       Source address for data
- *
- * An instance of this structure is to be allocated along with the
- * Scsi_Host and libfc fc_lport structures.
- */
-struct fcoe_port {
-	struct fcoe_interface *fcoe;
-	struct fc_lport	      *lport;
-	struct sk_buff_head   fcoe_pending_queue;
-	u8		      fcoe_pending_queue_active;
-	struct timer_list     timer;
-	struct work_struct    destroy_work;
-	u8		      data_src_addr[ETH_ALEN];
-};
-
 #define fcoe_from_ctlr(fip) container_of(fip, struct fcoe_interface, ctlr)
 
 /**
@@ -140,7 +101,8 @@ struct fcoe_port {
  */
 static inline struct net_device *fcoe_netdev(const struct fc_lport *lport)
 {
-	return ((struct fcoe_port *)lport_priv(lport))->fcoe->netdev;
+	return ((struct fcoe_interface *)
+			((struct fcoe_port *)lport_priv(lport))->priv)->netdev;
 }
 
 #endif /* _FCOE_H_ */
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/fcoe_ctlr.c
index 625c6be25396..c93f007e702f 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/fcoe_ctlr.c
@@ -44,9 +44,7 @@
 #include <scsi/libfc.h>
 #include <scsi/libfcoe.h>
 
-MODULE_AUTHOR("Open-FCoE.org");
-MODULE_DESCRIPTION("FIP discovery protocol support for FCoE HBAs");
-MODULE_LICENSE("GPL v2");
+#include "libfcoe.h"
 
 #define	FCOE_CTLR_MIN_FKA	500		/* min keep alive (mS) */
 #define	FCOE_CTLR_DEF_FKA	FIP_DEF_FKA	/* default keep alive (mS) */
@@ -66,31 +64,7 @@ static u8 fcoe_all_enode[ETH_ALEN] = FIP_ALL_ENODE_MACS;
 static u8 fcoe_all_vn2vn[ETH_ALEN] = FIP_ALL_VN2VN_MACS;
 static u8 fcoe_all_p2p[ETH_ALEN] = FIP_ALL_P2P_MACS;
 
-unsigned int libfcoe_debug_logging;
-module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
-MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
-
-#define LIBFCOE_LOGGING	    0x01 /* General logging, not categorized */
-#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
-
-#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD)		\
-do {							\
-	if (unlikely(libfcoe_debug_logging & LEVEL))	\
-		do {					\
-			CMD;				\
-		} while (0);				\
-} while (0)
-
-#define LIBFCOE_DBG(fmt, args...)					\
-	LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING,				\
-			      printk(KERN_INFO "libfcoe: " fmt, ##args);)
-
-#define LIBFCOE_FIP_DBG(fip, fmt, args...)				\
-	LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING,			\
-			      printk(KERN_INFO "host%d: fip: " fmt, 	\
-				     (fip)->lp->host->host_no, ##args);)
-
-static const char *fcoe_ctlr_states[] = {
+static const char * const fcoe_ctlr_states[] = {
 	[FIP_ST_DISABLED] =	"DISABLED",
 	[FIP_ST_LINK_WAIT] =	"LINK_WAIT",
 	[FIP_ST_AUTO] =		"AUTO",
@@ -308,8 +282,8 @@ static void fcoe_ctlr_solicit(struct fcoe_ctlr *fip, struct fcoe_fcf *fcf)
 			struct fip_mac_desc mac;
 			struct fip_wwn_desc wwnn;
 			struct fip_size_desc size;
-		} __attribute__((packed)) desc;
-	}  __attribute__((packed)) *sol;
+		} __packed desc;
+	}  __packed * sol;
 	u32 fcoe_size;
 
 	skb = dev_alloc_skb(sizeof(*sol));
@@ -456,7 +430,7 @@ static void fcoe_ctlr_send_keep_alive(struct fcoe_ctlr *fip,
 		struct ethhdr eth;
 		struct fip_header fip;
 		struct fip_mac_desc mac;
-	} __attribute__((packed)) *kal;
+	} __packed * kal;
 	struct fip_vn_desc *vn;
 	u32 len;
 	struct fc_lport *lp;
@@ -527,7 +501,7 @@ static int fcoe_ctlr_encaps(struct fcoe_ctlr *fip, struct fc_lport *lport,
 		struct ethhdr eth;
 		struct fip_header fip;
 		struct fip_encaps encaps;
-	} __attribute__((packed)) *cap;
+	} __packed * cap;
 	struct fc_frame_header *fh;
 	struct fip_mac_desc *mac;
 	struct fcoe_fcf *fcf;
@@ -1819,7 +1793,7 @@ static void fcoe_ctlr_vn_send(struct fcoe_ctlr *fip,
 		struct fip_mac_desc mac;
 		struct fip_wwn_desc wwnn;
 		struct fip_vn_desc vn;
-	} __attribute__((packed)) *frame;
+	} __packed * frame;
 	struct fip_fc4_feat *ff;
 	struct fip_size_desc *size;
 	u32 fcp_feat;
diff --git a/drivers/scsi/fcoe/fcoe_transport.c b/drivers/scsi/fcoe/fcoe_transport.c
new file mode 100644
index 000000000000..745eb9a22d64
--- /dev/null
+++ b/drivers/scsi/fcoe/fcoe_transport.c
@@ -0,0 +1,726 @@
+/*
+ * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ *
+ * Maintained at www.Open-FCoE.org
+ */
+
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/netdevice.h>
+#include <linux/errno.h>
+#include <linux/crc32.h>
+#include <scsi/libfcoe.h>
+
+#include "libfcoe.h"
+
+MODULE_AUTHOR("Open-FCoE.org");
+MODULE_DESCRIPTION("FIP discovery protocol and FCoE transport for FCoE HBAs");
+MODULE_LICENSE("GPL v2");
+
+static int fcoe_transport_create(const char *, struct kernel_param *);
+static int fcoe_transport_destroy(const char *, struct kernel_param *);
+static int fcoe_transport_show(char *buffer, const struct kernel_param *kp);
+static struct fcoe_transport *fcoe_transport_lookup(struct net_device *device);
+static struct fcoe_transport *fcoe_netdev_map_lookup(struct net_device *device);
+static int fcoe_transport_enable(const char *, struct kernel_param *);
+static int fcoe_transport_disable(const char *, struct kernel_param *);
+
+static LIST_HEAD(fcoe_transports);
+static LIST_HEAD(fcoe_netdevs);
+static DEFINE_MUTEX(ft_mutex);
+
+unsigned int libfcoe_debug_logging;
+module_param_named(debug_logging, libfcoe_debug_logging, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
+
+module_param_call(show, NULL, fcoe_transport_show, NULL, S_IRUSR);
+__MODULE_PARM_TYPE(show, "string");
+MODULE_PARM_DESC(show, " Show attached FCoE transports");
+
+module_param_call(create, fcoe_transport_create, NULL,
+		  (void *)FIP_MODE_FABRIC, S_IWUSR);
+__MODULE_PARM_TYPE(create, "string");
+MODULE_PARM_DESC(create, " Creates fcoe instance on a ethernet interface");
+
+module_param_call(create_vn2vn, fcoe_transport_create, NULL,
+		  (void *)FIP_MODE_VN2VN, S_IWUSR);
+__MODULE_PARM_TYPE(create_vn2vn, "string");
+MODULE_PARM_DESC(create_vn2vn, " Creates a VN_node to VN_node FCoE instance "
+		 "on an Ethernet interface");
+
+module_param_call(destroy, fcoe_transport_destroy, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(destroy, "string");
+MODULE_PARM_DESC(destroy, " Destroys fcoe instance on a ethernet interface");
+
+module_param_call(enable, fcoe_transport_enable, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(enable, "string");
+MODULE_PARM_DESC(enable, " Enables fcoe on a ethernet interface.");
+
+module_param_call(disable, fcoe_transport_disable, NULL, NULL, S_IWUSR);
+__MODULE_PARM_TYPE(disable, "string");
+MODULE_PARM_DESC(disable, " Disables fcoe on a ethernet interface.");
+
+/**
+ * fcoe_fc_crc() - Calculates the CRC for a given frame
+ * @fp: The frame to be checksumed
+ *
+ * This uses crc32() routine to calculate the CRC for a frame
+ *
+ * Return: The 32 bit CRC value
+ */
+u32 fcoe_fc_crc(struct fc_frame *fp)
+{
+	struct sk_buff *skb = fp_skb(fp);
+	struct skb_frag_struct *frag;
+	unsigned char *data;
+	unsigned long off, len, clen;
+	u32 crc;
+	unsigned i;
+
+	crc = crc32(~0, skb->data, skb_headlen(skb));
+
+	for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
+		frag = &skb_shinfo(skb)->frags[i];
+		off = frag->page_offset;
+		len = frag->size;
+		while (len > 0) {
+			clen = min(len, PAGE_SIZE - (off & ~PAGE_MASK));
+			data = kmap_atomic(frag->page + (off >> PAGE_SHIFT),
+					   KM_SKB_DATA_SOFTIRQ);
+			crc = crc32(crc, data + (off & ~PAGE_MASK), clen);
+			kunmap_atomic(data, KM_SKB_DATA_SOFTIRQ);
+			off += clen;
+			len -= clen;
+		}
+	}
+	return crc;
+}
+EXPORT_SYMBOL_GPL(fcoe_fc_crc);
+
+/**
+ * fcoe_start_io() - Start FCoE I/O
+ * @skb: The packet to be transmitted
+ *
+ * This routine is called from the net device to start transmitting
+ * FCoE packets.
+ *
+ * Returns: 0 for success
+ */
+int fcoe_start_io(struct sk_buff *skb)
+{
+	struct sk_buff *nskb;
+	int rc;
+
+	nskb = skb_clone(skb, GFP_ATOMIC);
+	if (!nskb)
+		return -ENOMEM;
+	rc = dev_queue_xmit(nskb);
+	if (rc != 0)
+		return rc;
+	kfree_skb(skb);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fcoe_start_io);
+
+
+/**
+ * fcoe_clean_pending_queue() - Dequeue a skb and free it
+ * @lport: The local port to dequeue a skb on
+ */
+void fcoe_clean_pending_queue(struct fc_lport *lport)
+{
+	struct fcoe_port  *port = lport_priv(lport);
+	struct sk_buff *skb;
+
+	spin_lock_bh(&port->fcoe_pending_queue.lock);
+	while ((skb = __skb_dequeue(&port->fcoe_pending_queue)) != NULL) {
+		spin_unlock_bh(&port->fcoe_pending_queue.lock);
+		kfree_skb(skb);
+		spin_lock_bh(&port->fcoe_pending_queue.lock);
+	}
+	spin_unlock_bh(&port->fcoe_pending_queue.lock);
+}
+EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
+
+/**
+ * fcoe_check_wait_queue() - Attempt to clear the transmit backlog
+ * @lport: The local port whose backlog is to be cleared
+ *
+ * This empties the wait_queue, dequeues the head of the wait_queue queue
+ * and calls fcoe_start_io() for each packet. If all skb have been
+ * transmitted it returns the qlen. If an error occurs it restores
+ * wait_queue (to try again later) and returns -1.
+ *
+ * The wait_queue is used when the skb transmit fails. The failed skb
+ * will go in the wait_queue which will be emptied by the timer function or
+ * by the next skb transmit.
+ */
+void fcoe_check_wait_queue(struct fc_lport *lport, struct sk_buff *skb)
+{
+	struct fcoe_port *port = lport_priv(lport);
+	int rc;
+
+	spin_lock_bh(&port->fcoe_pending_queue.lock);
+
+	if (skb)
+		__skb_queue_tail(&port->fcoe_pending_queue, skb);
+
+	if (port->fcoe_pending_queue_active)
+		goto out;
+	port->fcoe_pending_queue_active = 1;
+
+	while (port->fcoe_pending_queue.qlen) {
+		/* keep qlen > 0 until fcoe_start_io succeeds */
+		port->fcoe_pending_queue.qlen++;
+		skb = __skb_dequeue(&port->fcoe_pending_queue);
+
+		spin_unlock_bh(&port->fcoe_pending_queue.lock);
+		rc = fcoe_start_io(skb);
+		spin_lock_bh(&port->fcoe_pending_queue.lock);
+
+		if (rc) {
+			__skb_queue_head(&port->fcoe_pending_queue, skb);
+			/* undo temporary increment above */
+			port->fcoe_pending_queue.qlen--;
+			break;
+		}
+		/* undo temporary increment above */
+		port->fcoe_pending_queue.qlen--;
+	}
+
+	if (port->fcoe_pending_queue.qlen < port->min_queue_depth)
+		lport->qfull = 0;
+	if (port->fcoe_pending_queue.qlen && !timer_pending(&port->timer))
+		mod_timer(&port->timer, jiffies + 2);
+	port->fcoe_pending_queue_active = 0;
+out:
+	if (port->fcoe_pending_queue.qlen > port->max_queue_depth)
+		lport->qfull = 1;
+	spin_unlock_bh(&port->fcoe_pending_queue.lock);
+}
+EXPORT_SYMBOL_GPL(fcoe_check_wait_queue);
+
+/**
+ * fcoe_queue_timer() - The fcoe queue timer
+ * @lport: The local port
+ *
+ * Calls fcoe_check_wait_queue on timeout
+ */
+void fcoe_queue_timer(ulong lport)
+{
+	fcoe_check_wait_queue((struct fc_lport *)lport, NULL);
+}
+EXPORT_SYMBOL_GPL(fcoe_queue_timer);
+
+/**
+ * fcoe_get_paged_crc_eof() - Allocate a page to be used for the trailer CRC
+ * @skb:  The packet to be transmitted
+ * @tlen: The total length of the trailer
+ * @fps:  The fcoe context
+ *
+ * This routine allocates a page for frame trailers. The page is re-used if
+ * there is enough room left on it for the current trailer. If there isn't
+ * enough buffer left a new page is allocated for the trailer. Reference to
+ * the page from this function as well as the skbs using the page fragments
+ * ensure that the page is freed at the appropriate time.
+ *
+ * Returns: 0 for success
+ */
+int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen,
+			   struct fcoe_percpu_s *fps)
+{
+	struct page *page;
+
+	page = fps->crc_eof_page;
+	if (!page) {
+		page = alloc_page(GFP_ATOMIC);
+		if (!page)
+			return -ENOMEM;
+
+		fps->crc_eof_page = page;
+		fps->crc_eof_offset = 0;
+	}
+
+	get_page(page);
+	skb_fill_page_desc(skb, skb_shinfo(skb)->nr_frags, page,
+			   fps->crc_eof_offset, tlen);
+	skb->len += tlen;
+	skb->data_len += tlen;
+	skb->truesize += tlen;
+	fps->crc_eof_offset += sizeof(struct fcoe_crc_eof);
+
+	if (fps->crc_eof_offset >= PAGE_SIZE) {
+		fps->crc_eof_page = NULL;
+		fps->crc_eof_offset = 0;
+		put_page(page);
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(fcoe_get_paged_crc_eof);
+
+/**
+ * fcoe_transport_lookup - find an fcoe transport that matches a netdev
+ * @netdev: The netdev to look for from all attached transports
+ *
+ * Returns : ptr to the fcoe transport that supports this netdev or NULL
+ * if not found.
+ *
+ * The ft_mutex should be held when this is called
+ */
+static struct fcoe_transport *fcoe_transport_lookup(struct net_device *netdev)
+{
+	struct fcoe_transport *ft = NULL;
+
+	list_for_each_entry(ft, &fcoe_transports, list)
+		if (ft->match && ft->match(netdev))
+			return ft;
+	return NULL;
+}
+
+/**
+ * fcoe_transport_attach - Attaches an FCoE transport
+ * @ft: The fcoe transport to be attached
+ *
+ * Returns : 0 for success
+ */
+int fcoe_transport_attach(struct fcoe_transport *ft)
+{
+	int rc = 0;
+
+	mutex_lock(&ft_mutex);
+	if (ft->attached) {
+		LIBFCOE_TRANSPORT_DBG("transport %s already attached\n",
+				       ft->name);
+		rc = -EEXIST;
+		goto out_attach;
+	}
+
+	/* Add default transport to the tail */
+	if (strcmp(ft->name, FCOE_TRANSPORT_DEFAULT))
+		list_add(&ft->list, &fcoe_transports);
+	else
+		list_add_tail(&ft->list, &fcoe_transports);
+
+	ft->attached = true;
+	LIBFCOE_TRANSPORT_DBG("attaching transport %s\n", ft->name);
+
+out_attach:
+	mutex_unlock(&ft_mutex);
+	return rc;
+}
+EXPORT_SYMBOL(fcoe_transport_attach);
+
+/**
+ * fcoe_transport_attach - Detaches an FCoE transport
+ * @ft: The fcoe transport to be attached
+ *
+ * Returns : 0 for success
+ */
+int fcoe_transport_detach(struct fcoe_transport *ft)
+{
+	int rc = 0;
+
+	mutex_lock(&ft_mutex);
+	if (!ft->attached) {
+		LIBFCOE_TRANSPORT_DBG("transport %s already detached\n",
+			ft->name);
+		rc = -ENODEV;
+		goto out_attach;
+	}
+
+	list_del(&ft->list);
+	ft->attached = false;
+	LIBFCOE_TRANSPORT_DBG("detaching transport %s\n", ft->name);
+
+out_attach:
+	mutex_unlock(&ft_mutex);
+	return rc;
+
+}
+EXPORT_SYMBOL(fcoe_transport_detach);
+
+static int fcoe_transport_show(char *buffer, const struct kernel_param *kp)
+{
+	int i, j;
+	struct fcoe_transport *ft = NULL;
+
+	i = j = sprintf(buffer, "Attached FCoE transports:");
+	mutex_lock(&ft_mutex);
+	list_for_each_entry(ft, &fcoe_transports, list) {
+		i += snprintf(&buffer[i], IFNAMSIZ, "%s ", ft->name);
+		if (i >= PAGE_SIZE)
+			break;
+	}
+	mutex_unlock(&ft_mutex);
+	if (i == j)
+		i += snprintf(&buffer[i], IFNAMSIZ, "none");
+	return i;
+}
+
+static int __init fcoe_transport_init(void)
+{
+	return 0;
+}
+
+static int __exit fcoe_transport_exit(void)
+{
+	struct fcoe_transport *ft;
+
+	mutex_lock(&ft_mutex);
+	list_for_each_entry(ft, &fcoe_transports, list)
+		printk(KERN_ERR "FCoE transport %s is still attached!\n",
+		      ft->name);
+	mutex_unlock(&ft_mutex);
+	return 0;
+}
+
+
+static int fcoe_add_netdev_mapping(struct net_device *netdev,
+					struct fcoe_transport *ft)
+{
+	struct fcoe_netdev_mapping *nm;
+
+	nm = kmalloc(sizeof(*nm), GFP_KERNEL);
+	if (!nm) {
+		printk(KERN_ERR "Unable to allocate netdev_mapping");
+		return -ENOMEM;
+	}
+
+	nm->netdev = netdev;
+	nm->ft = ft;
+
+	list_add(&nm->list, &fcoe_netdevs);
+	return 0;
+}
+
+
+static void fcoe_del_netdev_mapping(struct net_device *netdev)
+{
+	struct fcoe_netdev_mapping *nm = NULL, *tmp;
+
+	list_for_each_entry_safe(nm, tmp, &fcoe_netdevs, list) {
+		if (nm->netdev == netdev) {
+			list_del(&nm->list);
+			kfree(nm);
+			return;
+		}
+	}
+}
+
+
+/**
+ * fcoe_netdev_map_lookup - find the fcoe transport that matches the netdev on which
+ * it was created
+ *
+ * Returns : ptr to the fcoe transport that supports this netdev or NULL
+ * if not found.
+ *
+ * The ft_mutex should be held when this is called
+ */
+static struct fcoe_transport *fcoe_netdev_map_lookup(struct net_device *netdev)
+{
+	struct fcoe_transport *ft = NULL;
+	struct fcoe_netdev_mapping *nm;
+
+	list_for_each_entry(nm, &fcoe_netdevs, list) {
+		if (netdev == nm->netdev) {
+			ft = nm->ft;
+			return ft;
+		}
+	}
+
+	return NULL;
+}
+
+/**
+ * fcoe_if_to_netdev() - Parse a name buffer to get a net device
+ * @buffer: The name of the net device
+ *
+ * Returns: NULL or a ptr to net_device
+ */
+static struct net_device *fcoe_if_to_netdev(const char *buffer)
+{
+	char *cp;
+	char ifname[IFNAMSIZ + 2];
+
+	if (buffer) {
+		strlcpy(ifname, buffer, IFNAMSIZ);
+		cp = ifname + strlen(ifname);
+		while (--cp >= ifname && *cp == '\n')
+			*cp = '\0';
+		return dev_get_by_name(&init_net, ifname);
+	}
+	return NULL;
+}
+
+/**
+ * fcoe_transport_create() - Create a fcoe interface
+ * @buffer: The name of the Ethernet interface to create on
+ * @kp:	    The associated kernel param
+ *
+ * Called from sysfs. This holds the ft_mutex while calling the
+ * registered fcoe transport's create function.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_transport_create(const char *buffer, struct kernel_param *kp)
+{
+	int rc = -ENODEV;
+	struct net_device *netdev = NULL;
+	struct fcoe_transport *ft = NULL;
+	enum fip_state fip_mode = (enum fip_state)(long)kp->arg;
+
+	if (!mutex_trylock(&ft_mutex))
+		return restart_syscall();
+
+#ifdef CONFIG_LIBFCOE_MODULE
+	/*
+	 * Make sure the module has been initialized, and is not about to be
+	 * removed.  Module parameter sysfs files are writable before the
+	 * module_init function is called and after module_exit.
+	 */
+	if (THIS_MODULE->state != MODULE_STATE_LIVE)
+		goto out_nodev;
+#endif
+
+	netdev = fcoe_if_to_netdev(buffer);
+	if (!netdev) {
+		LIBFCOE_TRANSPORT_DBG("Invalid device %s.\n", buffer);
+		goto out_nodev;
+	}
+
+	ft = fcoe_netdev_map_lookup(netdev);
+	if (ft) {
+		LIBFCOE_TRANSPORT_DBG("transport %s already has existing "
+				      "FCoE instance on %s.\n",
+				      ft->name, netdev->name);
+		rc = -EEXIST;
+		goto out_putdev;
+	}
+
+	ft = fcoe_transport_lookup(netdev);
+	if (!ft) {
+		LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
+				      netdev->name);
+		goto out_putdev;
+	}
+
+	rc = fcoe_add_netdev_mapping(netdev, ft);
+	if (rc) {
+		LIBFCOE_TRANSPORT_DBG("failed to add new netdev mapping "
+				      "for FCoE transport %s for %s.\n",
+				      ft->name, netdev->name);
+		goto out_putdev;
+	}
+
+	/* pass to transport create */
+	rc = ft->create ? ft->create(netdev, fip_mode) : -ENODEV;
+	if (rc)
+		fcoe_del_netdev_mapping(netdev);
+
+	LIBFCOE_TRANSPORT_DBG("transport %s %s to create fcoe on %s.\n",
+			      ft->name, (rc) ? "failed" : "succeeded",
+			      netdev->name);
+
+out_putdev:
+	dev_put(netdev);
+out_nodev:
+	mutex_unlock(&ft_mutex);
+	if (rc == -ERESTARTSYS)
+		return restart_syscall();
+	else
+		return rc;
+}
+
+/**
+ * fcoe_transport_destroy() - Destroy a FCoE interface
+ * @buffer: The name of the Ethernet interface to be destroyed
+ * @kp:	    The associated kernel parameter
+ *
+ * Called from sysfs. This holds the ft_mutex while calling the
+ * registered fcoe transport's destroy function.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_transport_destroy(const char *buffer, struct kernel_param *kp)
+{
+	int rc = -ENODEV;
+	struct net_device *netdev = NULL;
+	struct fcoe_transport *ft = NULL;
+
+	if (!mutex_trylock(&ft_mutex))
+		return restart_syscall();
+
+#ifdef CONFIG_LIBFCOE_MODULE
+	/*
+	 * Make sure the module has been initialized, and is not about to be
+	 * removed.  Module parameter sysfs files are writable before the
+	 * module_init function is called and after module_exit.
+	 */
+	if (THIS_MODULE->state != MODULE_STATE_LIVE)
+		goto out_nodev;
+#endif
+
+	netdev = fcoe_if_to_netdev(buffer);
+	if (!netdev) {
+		LIBFCOE_TRANSPORT_DBG("invalid device %s.\n", buffer);
+		goto out_nodev;
+	}
+
+	ft = fcoe_netdev_map_lookup(netdev);
+	if (!ft) {
+		LIBFCOE_TRANSPORT_DBG("no FCoE transport found for %s.\n",
+				      netdev->name);
+		goto out_putdev;
+	}
+
+	/* pass to transport destroy */
+	rc = ft->destroy ? ft->destroy(netdev) : -ENODEV;
+	fcoe_del_netdev_mapping(netdev);
+	LIBFCOE_TRANSPORT_DBG("transport %s %s to destroy fcoe on %s.\n",
+			      ft->name, (rc) ? "failed" : "succeeded",
+			      netdev->name);
+
+out_putdev:
+	dev_put(netdev);
+out_nodev:
+	mutex_unlock(&ft_mutex);
+
+	if (rc == -ERESTARTSYS)
+		return restart_syscall();
+	else
+		return rc;
+}
+
+/**
+ * fcoe_transport_disable() - Disables a FCoE interface
+ * @buffer: The name of the Ethernet interface to be disabled
+ * @kp:	    The associated kernel parameter
+ *
+ * Called from sysfs.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_transport_disable(const char *buffer, struct kernel_param *kp)
+{
+	int rc = -ENODEV;
+	struct net_device *netdev = NULL;
+	struct fcoe_transport *ft = NULL;
+
+	if (!mutex_trylock(&ft_mutex))
+		return restart_syscall();
+
+#ifdef CONFIG_LIBFCOE_MODULE
+	/*
+	 * Make sure the module has been initialized, and is not about to be
+	 * removed.  Module parameter sysfs files are writable before the
+	 * module_init function is called and after module_exit.
+	 */
+	if (THIS_MODULE->state != MODULE_STATE_LIVE)
+		goto out_nodev;
+#endif
+
+	netdev = fcoe_if_to_netdev(buffer);
+	if (!netdev)
+		goto out_nodev;
+
+	ft = fcoe_netdev_map_lookup(netdev);
+	if (!ft)
+		goto out_putdev;
+
+	rc = ft->disable ? ft->disable(netdev) : -ENODEV;
+
+out_putdev:
+	dev_put(netdev);
+out_nodev:
+	mutex_unlock(&ft_mutex);
+
+	if (rc == -ERESTARTSYS)
+		return restart_syscall();
+	else
+		return rc;
+}
+
+/**
+ * fcoe_transport_enable() - Enables a FCoE interface
+ * @buffer: The name of the Ethernet interface to be enabled
+ * @kp:     The associated kernel parameter
+ *
+ * Called from sysfs.
+ *
+ * Returns: 0 for success
+ */
+static int fcoe_transport_enable(const char *buffer, struct kernel_param *kp)
+{
+	int rc = -ENODEV;
+	struct net_device *netdev = NULL;
+	struct fcoe_transport *ft = NULL;
+
+	if (!mutex_trylock(&ft_mutex))
+		return restart_syscall();
+
+#ifdef CONFIG_LIBFCOE_MODULE
+	/*
+	 * Make sure the module has been initialized, and is not about to be
+	 * removed.  Module parameter sysfs files are writable before the
+	 * module_init function is called and after module_exit.
+	 */
+	if (THIS_MODULE->state != MODULE_STATE_LIVE)
+		goto out_nodev;
+#endif
+
+	netdev = fcoe_if_to_netdev(buffer);
+	if (!netdev)
+		goto out_nodev;
+
+	ft = fcoe_netdev_map_lookup(netdev);
+	if (!ft)
+		goto out_putdev;
+
+	rc = ft->enable ? ft->enable(netdev) : -ENODEV;
+
+out_putdev:
+	dev_put(netdev);
+out_nodev:
+	mutex_unlock(&ft_mutex);
+	if (rc == -ERESTARTSYS)
+		return restart_syscall();
+	else
+		return rc;
+}
+
+/**
+ * libfcoe_init() - Initialization routine for libfcoe.ko
+ */
+static int __init libfcoe_init(void)
+{
+	fcoe_transport_init();
+
+	return 0;
+}
+module_init(libfcoe_init);
+
+/**
+ * libfcoe_exit() - Tear down libfcoe.ko
+ */
+static void __exit libfcoe_exit(void)
+{
+	fcoe_transport_exit();
+}
+module_exit(libfcoe_exit);
diff --git a/drivers/scsi/fcoe/libfcoe.h b/drivers/scsi/fcoe/libfcoe.h
new file mode 100644
index 000000000000..6af5fc3a17d8
--- /dev/null
+++ b/drivers/scsi/fcoe/libfcoe.h
@@ -0,0 +1,31 @@
+#ifndef _FCOE_LIBFCOE_H_
+#define _FCOE_LIBFCOE_H_
+
+extern unsigned int libfcoe_debug_logging;
+#define LIBFCOE_LOGGING	    0x01 /* General logging, not categorized */
+#define LIBFCOE_FIP_LOGGING 0x02 /* FIP logging */
+#define LIBFCOE_TRANSPORT_LOGGING	0x04 /* FCoE transport logging */
+
+#define LIBFCOE_CHECK_LOGGING(LEVEL, CMD)		\
+do {							\
+	if (unlikely(libfcoe_debug_logging & LEVEL))	\
+		do {					\
+			CMD;				\
+		} while (0);				\
+} while (0)
+
+#define LIBFCOE_DBG(fmt, args...)					\
+	LIBFCOE_CHECK_LOGGING(LIBFCOE_LOGGING,				\
+			      printk(KERN_INFO "libfcoe: " fmt, ##args);)
+
+#define LIBFCOE_FIP_DBG(fip, fmt, args...)				\
+	LIBFCOE_CHECK_LOGGING(LIBFCOE_FIP_LOGGING,			\
+			      printk(KERN_INFO "host%d: fip: " fmt,	\
+				     (fip)->lp->host->host_no, ##args);)
+
+#define LIBFCOE_TRANSPORT_DBG(fmt, args...)				\
+	LIBFCOE_CHECK_LOGGING(LIBFCOE_TRANSPORT_LOGGING,		\
+			      printk(KERN_INFO "%s: " fmt,		\
+				     __func__, ##args);)
+
+#endif /* _FCOE_LIBFCOE_H_ */
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
index 92f185081e62..671cde9d4060 100644
--- a/drivers/scsi/fnic/fnic.h
+++ b/drivers/scsi/fnic/fnic.h
@@ -37,7 +37,7 @@
 
 #define DRV_NAME		"fnic"
 #define DRV_DESCRIPTION		"Cisco FCoE HBA Driver"
-#define DRV_VERSION		"1.4.0.145"
+#define DRV_VERSION		"1.5.0.1"
 #define PFX			DRV_NAME ": "
 #define DFX                     DRV_NAME "%d: "
 
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
index db710148d156..b576be734e2e 100644
--- a/drivers/scsi/fnic/vnic_dev.c
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -654,7 +654,7 @@ void vnic_dev_unregister(struct vnic_dev *vdev)
 				vdev->linkstatus_pa);
 		if (vdev->stats)
 			pci_free_consistent(vdev->pdev,
-				sizeof(struct vnic_dev),
+				sizeof(struct vnic_stats),
 				vdev->stats, vdev->stats_pa);
 		if (vdev->fw_info)
 			pci_free_consistent(vdev->pdev,
diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c
index 12deffccb8da..c30591f84a06 100644
--- a/drivers/scsi/hpsa.c
+++ b/drivers/scsi/hpsa.c
@@ -74,6 +74,10 @@ static int hpsa_allow_any;
 module_param(hpsa_allow_any, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(hpsa_allow_any,
 		"Allow hpsa driver to access unknown HP Smart Array hardware");
+static int hpsa_simple_mode;
+module_param(hpsa_simple_mode, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(hpsa_simple_mode,
+	"Use 'simple mode' rather than 'performant mode'");
 
 /* define the PCI info for the cards we can control */
 static const struct pci_device_id hpsa_pci_device_id[] = {
@@ -155,6 +159,10 @@ static ssize_t unique_id_show(struct device *dev,
 	struct device_attribute *attr, char *buf);
 static ssize_t host_show_firmware_revision(struct device *dev,
 	     struct device_attribute *attr, char *buf);
+static ssize_t host_show_commands_outstanding(struct device *dev,
+	     struct device_attribute *attr, char *buf);
+static ssize_t host_show_transport_mode(struct device *dev,
+	struct device_attribute *attr, char *buf);
 static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno);
 static ssize_t host_store_rescan(struct device *dev,
 	 struct device_attribute *attr, const char *buf, size_t count);
@@ -173,6 +181,10 @@ static int __devinit hpsa_find_cfg_addrs(struct pci_dev *pdev,
 static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
 	unsigned long *memory_bar);
 static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id);
+static int __devinit hpsa_wait_for_board_state(struct pci_dev *pdev,
+	void __iomem *vaddr, int wait_for_ready);
+#define BOARD_NOT_READY 0
+#define BOARD_READY 1
 
 static DEVICE_ATTR(raid_level, S_IRUGO, raid_level_show, NULL);
 static DEVICE_ATTR(lunid, S_IRUGO, lunid_show, NULL);
@@ -180,6 +192,10 @@ static DEVICE_ATTR(unique_id, S_IRUGO, unique_id_show, NULL);
 static DEVICE_ATTR(rescan, S_IWUSR, NULL, host_store_rescan);
 static DEVICE_ATTR(firmware_revision, S_IRUGO,
 	host_show_firmware_revision, NULL);
+static DEVICE_ATTR(commands_outstanding, S_IRUGO,
+	host_show_commands_outstanding, NULL);
+static DEVICE_ATTR(transport_mode, S_IRUGO,
+	host_show_transport_mode, NULL);
 
 static struct device_attribute *hpsa_sdev_attrs[] = {
 	&dev_attr_raid_level,
@@ -191,6 +207,8 @@ static struct device_attribute *hpsa_sdev_attrs[] = {
 static struct device_attribute *hpsa_shost_attrs[] = {
 	&dev_attr_rescan,
 	&dev_attr_firmware_revision,
+	&dev_attr_commands_outstanding,
+	&dev_attr_transport_mode,
 	NULL,
 };
 
@@ -291,17 +309,38 @@ static ssize_t host_show_firmware_revision(struct device *dev,
 		fwrev[0], fwrev[1], fwrev[2], fwrev[3]);
 }
 
+static ssize_t host_show_commands_outstanding(struct device *dev,
+	     struct device_attribute *attr, char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct ctlr_info *h = shost_to_hba(shost);
+
+	return snprintf(buf, 20, "%d\n", h->commands_outstanding);
+}
+
+static ssize_t host_show_transport_mode(struct device *dev,
+	struct device_attribute *attr, char *buf)
+{
+	struct ctlr_info *h;
+	struct Scsi_Host *shost = class_to_shost(dev);
+
+	h = shost_to_hba(shost);
+	return snprintf(buf, 20, "%s\n",
+		h->transMethod & CFGTBL_Trans_Performant ?
+			"performant" : "simple");
+}
+
 /* Enqueuing and dequeuing functions for cmdlists. */
-static inline void addQ(struct hlist_head *list, struct CommandList *c)
+static inline void addQ(struct list_head *list, struct CommandList *c)
 {
-	hlist_add_head(&c->list, list);
+	list_add_tail(&c->list, list);
 }
 
 static inline u32 next_command(struct ctlr_info *h)
 {
 	u32 a;
 
-	if (unlikely(h->transMethod != CFGTBL_Trans_Performant))
+	if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
 		return h->access.command_completed(h);
 
 	if ((*(h->reply_pool_head) & 1) == (h->reply_pool_wraparound)) {
@@ -325,7 +364,7 @@ static inline u32 next_command(struct ctlr_info *h)
  */
 static void set_performant_mode(struct ctlr_info *h, struct CommandList *c)
 {
-	if (likely(h->transMethod == CFGTBL_Trans_Performant))
+	if (likely(h->transMethod & CFGTBL_Trans_Performant))
 		c->busaddr |= 1 | (h->blockFetchTable[c->Header.SGList] << 1);
 }
 
@@ -344,9 +383,9 @@ static void enqueue_cmd_and_start_io(struct ctlr_info *h,
 
 static inline void removeQ(struct CommandList *c)
 {
-	if (WARN_ON(hlist_unhashed(&c->list)))
+	if (WARN_ON(list_empty(&c->list)))
 		return;
-	hlist_del_init(&c->list);
+	list_del_init(&c->list);
 }
 
 static inline int is_hba_lunid(unsigned char scsi3addr[])
@@ -1130,6 +1169,10 @@ static void complete_scsi_command(struct CommandList *cp,
 		cmd->result = DID_TIME_OUT << 16;
 		dev_warn(&h->pdev->dev, "cp %p timedout\n", cp);
 		break;
+	case CMD_UNABORTABLE:
+		cmd->result = DID_ERROR << 16;
+		dev_warn(&h->pdev->dev, "Command unabortable\n");
+		break;
 	default:
 		cmd->result = DID_ERROR << 16;
 		dev_warn(&h->pdev->dev, "cp %p returned unknown status %x\n",
@@ -1160,7 +1203,7 @@ static int hpsa_scsi_detect(struct ctlr_info *h)
 	sh->sg_tablesize = h->maxsgentries;
 	h->scsi_host = sh;
 	sh->hostdata[0] = (unsigned long) h;
-	sh->irq = h->intr[PERF_MODE_INT];
+	sh->irq = h->intr[h->intr_mode];
 	sh->unique_id = sh->irq;
 	error = scsi_add_host(sh, &h->pdev->dev);
 	if (error)
@@ -1295,6 +1338,9 @@ static void hpsa_scsi_interpret_error(struct CommandList *cp)
 	case CMD_TIMEOUT:
 		dev_warn(d, "cp %p timed out\n", cp);
 		break;
+	case CMD_UNABORTABLE:
+		dev_warn(d, "Command unabortable\n");
+		break;
 	default:
 		dev_warn(d, "cp %p returned unknown status %x\n", cp,
 				ei->CommandStatus);
@@ -1595,6 +1641,8 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
 	if (lun == 0) /* if lun is 0, then obviously we have a lun 0. */
 		return 0;
 
+	memset(scsi3addr, 0, 8);
+	scsi3addr[3] = target;
 	if (is_hba_lunid(scsi3addr))
 		return 0; /* Don't add the RAID controller here. */
 
@@ -1609,8 +1657,6 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h,
 		return 0;
 	}
 
-	memset(scsi3addr, 0, 8);
-	scsi3addr[3] = target;
 	if (hpsa_update_device_info(h, scsi3addr, this_device))
 		return 0;
 	(*nmsa2xxx_enclosures)++;
@@ -2199,7 +2245,7 @@ static struct CommandList *cmd_alloc(struct ctlr_info *h)
 
 	c->cmdindex = i;
 
-	INIT_HLIST_NODE(&c->list);
+	INIT_LIST_HEAD(&c->list);
 	c->busaddr = (u32) cmd_dma_handle;
 	temp64.val = (u64) err_dma_handle;
 	c->ErrDesc.Addr.lower = temp64.val32.lower;
@@ -2237,7 +2283,7 @@ static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
 	}
 	memset(c->err_info, 0, sizeof(*c->err_info));
 
-	INIT_HLIST_NODE(&c->list);
+	INIT_LIST_HEAD(&c->list);
 	c->busaddr = (u32) cmd_dma_handle;
 	temp64.val = (u64) err_dma_handle;
 	c->ErrDesc.Addr.lower = temp64.val32.lower;
@@ -2267,7 +2313,7 @@ static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
 	pci_free_consistent(h->pdev, sizeof(*c->err_info),
 			    c->err_info, (dma_addr_t) temp64.val);
 	pci_free_consistent(h->pdev, sizeof(*c),
-			    c, (dma_addr_t) c->busaddr);
+			    c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK));
 }
 
 #ifdef CONFIG_COMPAT
@@ -2281,6 +2327,7 @@ static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg)
 	int err;
 	u32 cp;
 
+	memset(&arg64, 0, sizeof(arg64));
 	err = 0;
 	err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 			   sizeof(arg64.LUN_info));
@@ -2317,6 +2364,7 @@ static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
 	int err;
 	u32 cp;
 
+	memset(&arg64, 0, sizeof(arg64));
 	err = 0;
 	err |= copy_from_user(&arg64.LUN_info, &arg32->LUN_info,
 			   sizeof(arg64.LUN_info));
@@ -2433,15 +2481,17 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		buff = kmalloc(iocommand.buf_size, GFP_KERNEL);
 		if (buff == NULL)
 			return -EFAULT;
-	}
-	if (iocommand.Request.Type.Direction == XFER_WRITE) {
-		/* Copy the data into the buffer we created */
-		if (copy_from_user(buff, iocommand.buf, iocommand.buf_size)) {
-			kfree(buff);
-			return -EFAULT;
+		if (iocommand.Request.Type.Direction == XFER_WRITE) {
+			/* Copy the data into the buffer we created */
+			if (copy_from_user(buff, iocommand.buf,
+				iocommand.buf_size)) {
+				kfree(buff);
+				return -EFAULT;
+			}
+		} else {
+			memset(buff, 0, iocommand.buf_size);
 		}
-	} else
-		memset(buff, 0, iocommand.buf_size);
+	}
 	c = cmd_special_alloc(h);
 	if (c == NULL) {
 		kfree(buff);
@@ -2487,8 +2537,8 @@ static int hpsa_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		cmd_special_free(h, c);
 		return -EFAULT;
 	}
-
-	if (iocommand.Request.Type.Direction == XFER_READ) {
+	if (iocommand.Request.Type.Direction == XFER_READ &&
+		iocommand.buf_size > 0) {
 		/* Copy the data out of the buffer we created */
 		if (copy_to_user(iocommand.buf, buff, iocommand.buf_size)) {
 			kfree(buff);
@@ -2581,14 +2631,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 	}
 	c->cmd_type = CMD_IOCTL_PEND;
 	c->Header.ReplyQueue = 0;
-
-	if (ioc->buf_size > 0) {
-		c->Header.SGList = sg_used;
-		c->Header.SGTotal = sg_used;
-	} else {
-		c->Header.SGList = 0;
-		c->Header.SGTotal = 0;
-	}
+	c->Header.SGList = c->Header.SGTotal = sg_used;
 	memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
 	c->Header.Tag.lower = c->busaddr;
 	memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
@@ -2605,7 +2648,8 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		}
 	}
 	hpsa_scsi_do_simple_cmd_core(h, c);
-	hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
+	if (sg_used)
+		hpsa_pci_unmap(h->pdev, c, sg_used, PCI_DMA_BIDIRECTIONAL);
 	check_ioctl_unit_attention(h, c);
 	/* Copy the error information out */
 	memcpy(&ioc->error_info, c->err_info, sizeof(ioc->error_info));
@@ -2614,7 +2658,7 @@ static int hpsa_big_passthru_ioctl(struct ctlr_info *h, void __user *argp)
 		status = -EFAULT;
 		goto cleanup1;
 	}
-	if (ioc->Request.Type.Direction == XFER_READ) {
+	if (ioc->Request.Type.Direction == XFER_READ && ioc->buf_size > 0) {
 		/* Copy the data out of the buffer we created */
 		BYTE __user *ptr = ioc->buf;
 		for (i = 0; i < sg_used; i++) {
@@ -2810,8 +2854,8 @@ static void start_io(struct ctlr_info *h)
 {
 	struct CommandList *c;
 
-	while (!hlist_empty(&h->reqQ)) {
-		c = hlist_entry(h->reqQ.first, struct CommandList, list);
+	while (!list_empty(&h->reqQ)) {
+		c = list_entry(h->reqQ.next, struct CommandList, list);
 		/* can't do anything if fifo is full */
 		if ((h->access.fifo_full(h))) {
 			dev_warn(&h->pdev->dev, "fifo full\n");
@@ -2867,20 +2911,22 @@ static inline void finish_cmd(struct CommandList *c, u32 raw_tag)
 
 static inline u32 hpsa_tag_contains_index(u32 tag)
 {
-#define DIRECT_LOOKUP_BIT 0x10
 	return tag & DIRECT_LOOKUP_BIT;
 }
 
 static inline u32 hpsa_tag_to_index(u32 tag)
 {
-#define DIRECT_LOOKUP_SHIFT 5
 	return tag >> DIRECT_LOOKUP_SHIFT;
 }
 
-static inline u32 hpsa_tag_discard_error_bits(u32 tag)
+
+static inline u32 hpsa_tag_discard_error_bits(struct ctlr_info *h, u32 tag)
 {
-#define HPSA_ERROR_BITS 0x03
-	return tag & ~HPSA_ERROR_BITS;
+#define HPSA_PERF_ERROR_BITS ((1 << DIRECT_LOOKUP_SHIFT) - 1)
+#define HPSA_SIMPLE_ERROR_BITS 0x03
+	if (unlikely(!(h->transMethod & CFGTBL_Trans_Performant)))
+		return tag & ~HPSA_SIMPLE_ERROR_BITS;
+	return tag & ~HPSA_PERF_ERROR_BITS;
 }
 
 /* process completion of an indexed ("direct lookup") command */
@@ -2904,10 +2950,9 @@ static inline u32 process_nonindexed_cmd(struct ctlr_info *h,
 {
 	u32 tag;
 	struct CommandList *c = NULL;
-	struct hlist_node *tmp;
 
-	tag = hpsa_tag_discard_error_bits(raw_tag);
-	hlist_for_each_entry(c, tmp, &h->cmpQ, list) {
+	tag = hpsa_tag_discard_error_bits(h, raw_tag);
+	list_for_each_entry(c, &h->cmpQ, list) {
 		if ((c->busaddr & 0xFFFFFFE0) == (tag & 0xFFFFFFE0)) {
 			finish_cmd(c, raw_tag);
 			return next_command(h);
@@ -2957,7 +3002,10 @@ static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-/* Send a message CDB to the firmware. */
+/* Send a message CDB to the firmware. Careful, this only works
+ * in simple mode, not performant mode due to the tag lookup.
+ * We only ever use this immediately after a controller reset.
+ */
 static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 						unsigned char type)
 {
@@ -3023,7 +3071,7 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 
 	for (i = 0; i < HPSA_MSG_SEND_RETRY_LIMIT; i++) {
 		tag = readl(vaddr + SA5_REPLY_PORT_OFFSET);
-		if (hpsa_tag_discard_error_bits(tag) == paddr32)
+		if ((tag & ~HPSA_SIMPLE_ERROR_BITS) == paddr32)
 			break;
 		msleep(HPSA_MSG_SEND_RETRY_INTERVAL_MSECS);
 	}
@@ -3055,38 +3103,6 @@ static __devinit int hpsa_message(struct pci_dev *pdev, unsigned char opcode,
 #define hpsa_soft_reset_controller(p) hpsa_message(p, 1, 0)
 #define hpsa_noop(p) hpsa_message(p, 3, 0)
 
-static __devinit int hpsa_reset_msi(struct pci_dev *pdev)
-{
-/* the #defines are stolen from drivers/pci/msi.h. */
-#define msi_control_reg(base)		(base + PCI_MSI_FLAGS)
-#define PCI_MSIX_FLAGS_ENABLE		(1 << 15)
-
-	int pos;
-	u16 control = 0;
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSI);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSI_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI\n");
-			pci_write_config_word(pdev, msi_control_reg(pos),
-					control & ~PCI_MSI_FLAGS_ENABLE);
-		}
-	}
-
-	pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
-	if (pos) {
-		pci_read_config_word(pdev, msi_control_reg(pos), &control);
-		if (control & PCI_MSIX_FLAGS_ENABLE) {
-			dev_info(&pdev->dev, "resetting MSI-X\n");
-			pci_write_config_word(pdev, msi_control_reg(pos),
-					control & ~PCI_MSIX_FLAGS_ENABLE);
-		}
-	}
-
-	return 0;
-}
-
 static int hpsa_controller_hard_reset(struct pci_dev *pdev,
 	void * __iomem vaddr, bool use_doorbell)
 {
@@ -3142,17 +3158,17 @@ static int hpsa_controller_hard_reset(struct pci_dev *pdev,
  */
 static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 {
-	u16 saved_config_space[32];
 	u64 cfg_offset;
 	u32 cfg_base_addr;
 	u64 cfg_base_addr_index;
 	void __iomem *vaddr;
 	unsigned long paddr;
 	u32 misc_fw_support, active_transport;
-	int rc, i;
+	int rc;
 	struct CfgTable __iomem *cfgtable;
 	bool use_doorbell;
 	u32 board_id;
+	u16 command_register;
 
 	/* For controllers as old as the P600, this is very nearly
 	 * the same thing as
@@ -3162,14 +3178,6 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 * pci_set_power_state(pci_dev, PCI_D0);
 	 * pci_restore_state(pci_dev);
 	 *
-	 * but we can't use these nice canned kernel routines on
-	 * kexec, because they also check the MSI/MSI-X state in PCI
-	 * configuration space and do the wrong thing when it is
-	 * set/cleared.  Also, the pci_save/restore_state functions
-	 * violate the ordering requirements for restoring the
-	 * configuration space from the CCISS document (see the
-	 * comment below).  So we roll our own ....
-	 *
 	 * For controllers newer than the P600, the pci power state
 	 * method of resetting doesn't work so we have another way
 	 * using the doorbell register.
@@ -3182,13 +3190,21 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	 * likely not be happy.  Just forbid resetting this conjoined mess.
 	 * The 640x isn't really supported by hpsa anyway.
 	 */
-	hpsa_lookup_board_id(pdev, &board_id);
+	rc = hpsa_lookup_board_id(pdev, &board_id);
+	if (rc < 0) {
+		dev_warn(&pdev->dev, "Not resetting device.\n");
+		return -ENODEV;
+	}
 	if (board_id == 0x409C0E11 || board_id == 0x409D0E11)
 		return -ENOTSUPP;
 
-	for (i = 0; i < 32; i++)
-		pci_read_config_word(pdev, 2*i, &saved_config_space[i]);
-
+	/* Save the PCI command register */
+	pci_read_config_word(pdev, 4, &command_register);
+	/* Turn the board off.  This is so that later pci_restore_state()
+	 * won't turn the board on before the rest of config space is ready.
+	 */
+	pci_disable_device(pdev);
+	pci_save_state(pdev);
 
 	/* find the first memory BAR, so we can find the cfg table */
 	rc = hpsa_pci_find_memory_BAR(pdev, &paddr);
@@ -3214,46 +3230,47 @@ static __devinit int hpsa_kdump_hard_reset_controller(struct pci_dev *pdev)
 	misc_fw_support = readl(&cfgtable->misc_fw_support);
 	use_doorbell = misc_fw_support & MISC_FW_DOORBELL_RESET;
 
-	/* The doorbell reset seems to cause lockups on some Smart
-	 * Arrays (e.g. P410, P410i, maybe others).  Until this is
-	 * fixed or at least isolated, avoid the doorbell reset.
-	 */
-	use_doorbell = 0;
-
 	rc = hpsa_controller_hard_reset(pdev, vaddr, use_doorbell);
 	if (rc)
 		goto unmap_cfgtable;
 
-	/* Restore the PCI configuration space.  The Open CISS
-	 * Specification says, "Restore the PCI Configuration
-	 * Registers, offsets 00h through 60h. It is important to
-	 * restore the command register, 16-bits at offset 04h,
-	 * last. Do not restore the configuration status register,
-	 * 16-bits at offset 06h."  Note that the offset is 2*i.
-	 */
-	for (i = 0; i < 32; i++) {
-		if (i == 2 || i == 3)
-			continue;
-		pci_write_config_word(pdev, 2*i, saved_config_space[i]);
+	pci_restore_state(pdev);
+	rc = pci_enable_device(pdev);
+	if (rc) {
+		dev_warn(&pdev->dev, "failed to enable device.\n");
+		goto unmap_cfgtable;
 	}
-	wmb();
-	pci_write_config_word(pdev, 4, saved_config_space[2]);
+	pci_write_config_word(pdev, 4, command_register);
 
 	/* Some devices (notably the HP Smart Array 5i Controller)
 	   need a little pause here */
 	msleep(HPSA_POST_RESET_PAUSE_MSECS);
 
+	/* Wait for board to become not ready, then ready. */
+	dev_info(&pdev->dev, "Waiting for board to become ready.\n");
+	rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_NOT_READY);
+	if (rc)
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become not ready\n");
+	rc = hpsa_wait_for_board_state(pdev, vaddr, BOARD_READY);
+	if (rc) {
+		dev_warn(&pdev->dev,
+			"failed waiting for board to become ready\n");
+		goto unmap_cfgtable;
+	}
+	dev_info(&pdev->dev, "board ready.\n");
+
 	/* Controller should be in simple mode at this point.  If it's not,
 	 * It means we're on one of those controllers which doesn't support
 	 * the doorbell reset method and on which the PCI power management reset
 	 * method doesn't work (P800, for example.)
-	 * In those cases, pretend the reset worked and hope for the best.
+	 * In those cases, don't try to proceed, as it generally doesn't work.
 	 */
 	active_transport = readl(&cfgtable->TransportActive);
 	if (active_transport & PERFORMANT_MODE) {
 		dev_warn(&pdev->dev, "Unable to successfully reset controller,"
-			" proceeding anyway.\n");
-		rc = -ENOTSUPP;
+			" Ignoring controller.\n");
+		rc = -ENODEV;
 	}
 
 unmap_cfgtable:
@@ -3386,7 +3403,7 @@ static void __devinit hpsa_interrupt_mode(struct ctlr_info *h)
 default_int_mode:
 #endif				/* CONFIG_PCI_MSI */
 	/* if we get here we're going to use the default interrupt mode */
-	h->intr[PERF_MODE_INT] = h->pdev->irq;
+	h->intr[h->intr_mode] = h->pdev->irq;
 }
 
 static int __devinit hpsa_lookup_board_id(struct pci_dev *pdev, u32 *board_id)
@@ -3438,18 +3455,28 @@ static int __devinit hpsa_pci_find_memory_BAR(struct pci_dev *pdev,
 	return -ENODEV;
 }
 
-static int __devinit hpsa_wait_for_board_ready(struct ctlr_info *h)
+static int __devinit hpsa_wait_for_board_state(struct pci_dev *pdev,
+	void __iomem *vaddr, int wait_for_ready)
 {
-	int i;
+	int i, iterations;
 	u32 scratchpad;
+	if (wait_for_ready)
+		iterations = HPSA_BOARD_READY_ITERATIONS;
+	else
+		iterations = HPSA_BOARD_NOT_READY_ITERATIONS;
 
-	for (i = 0; i < HPSA_BOARD_READY_ITERATIONS; i++) {
-		scratchpad = readl(h->vaddr + SA5_SCRATCHPAD_OFFSET);
-		if (scratchpad == HPSA_FIRMWARE_READY)
-			return 0;
+	for (i = 0; i < iterations; i++) {
+		scratchpad = readl(vaddr + SA5_SCRATCHPAD_OFFSET);
+		if (wait_for_ready) {
+			if (scratchpad == HPSA_FIRMWARE_READY)
+				return 0;
+		} else {
+			if (scratchpad != HPSA_FIRMWARE_READY)
+				return 0;
+		}
 		msleep(HPSA_BOARD_READY_POLL_INTERVAL_MSECS);
 	}
-	dev_warn(&h->pdev->dev, "board not ready, timed out.\n");
+	dev_warn(&pdev->dev, "board not ready, timed out.\n");
 	return -ENODEV;
 }
 
@@ -3497,6 +3524,11 @@ static int __devinit hpsa_find_cfgtables(struct ctlr_info *h)
 static void __devinit hpsa_get_max_perf_mode_cmds(struct ctlr_info *h)
 {
 	h->max_commands = readl(&(h->cfgtable->MaxPerformantModeCommands));
+
+	/* Limit commands in memory limited kdump scenario. */
+	if (reset_devices && h->max_commands > 32)
+		h->max_commands = 32;
+
 	if (h->max_commands < 16) {
 		dev_warn(&h->pdev->dev, "Controller reports "
 			"max supported commands of %d, an obvious lie. "
@@ -3571,16 +3603,21 @@ static inline void hpsa_p600_dma_prefetch_quirk(struct ctlr_info *h)
 static void __devinit hpsa_wait_for_mode_change_ack(struct ctlr_info *h)
 {
 	int i;
+	u32 doorbell_value;
+	unsigned long flags;
 
 	/* under certain very rare conditions, this can take awhile.
 	 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
 	 * as we enter this code.)
 	 */
 	for (i = 0; i < MAX_CONFIG_WAIT; i++) {
-		if (!(readl(h->vaddr + SA5_DOORBELL) & CFGTBL_ChangeReq))
+		spin_lock_irqsave(&h->lock, flags);
+		doorbell_value = readl(h->vaddr + SA5_DOORBELL);
+		spin_unlock_irqrestore(&h->lock, flags);
+		if (!(doorbell_value & CFGTBL_ChangeReq))
 			break;
 		/* delay and try again */
-		msleep(10);
+		usleep_range(10000, 20000);
 	}
 }
 
@@ -3603,6 +3640,7 @@ static int __devinit hpsa_enter_simple_mode(struct ctlr_info *h)
 			"unable to get board into simple mode\n");
 		return -ENODEV;
 	}
+	h->transMethod = CFGTBL_Trans_Simple;
 	return 0;
 }
 
@@ -3641,7 +3679,7 @@ static int __devinit hpsa_pci_init(struct ctlr_info *h)
 		err = -ENOMEM;
 		goto err_out_free_res;
 	}
-	err = hpsa_wait_for_board_ready(h);
+	err = hpsa_wait_for_board_state(h->pdev, h->vaddr, BOARD_READY);
 	if (err)
 		goto err_out_free_res;
 	err = hpsa_find_cfgtables(h);
@@ -3710,8 +3748,6 @@ static __devinit int hpsa_init_reset_devices(struct pci_dev *pdev)
 		return 0; /* just try to do the kdump anyhow. */
 	if (rc)
 		return -ENODEV;
-	if (hpsa_reset_msi(pdev))
-		return -ENODEV;
 
 	/* Now try to get the controller to respond to a no-op */
 	for (i = 0; i < HPSA_POST_RESET_NOOP_RETRIES; i++) {
@@ -3749,8 +3785,11 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 
 	h->pdev = pdev;
 	h->busy_initializing = 1;
-	INIT_HLIST_HEAD(&h->cmpQ);
-	INIT_HLIST_HEAD(&h->reqQ);
+	h->intr_mode = hpsa_simple_mode ? SIMPLE_MODE_INT : PERF_MODE_INT;
+	INIT_LIST_HEAD(&h->cmpQ);
+	INIT_LIST_HEAD(&h->reqQ);
+	spin_lock_init(&h->lock);
+	spin_lock_init(&h->scan_lock);
 	rc = hpsa_pci_init(h);
 	if (rc != 0)
 		goto clean1;
@@ -3777,20 +3816,20 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
 
 	if (h->msix_vector || h->msi_vector)
-		rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_msi,
+		rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_msi,
 				IRQF_DISABLED, h->devname, h);
 	else
-		rc = request_irq(h->intr[PERF_MODE_INT], do_hpsa_intr_intx,
+		rc = request_irq(h->intr[h->intr_mode], do_hpsa_intr_intx,
 				IRQF_DISABLED, h->devname, h);
 	if (rc) {
 		dev_err(&pdev->dev, "unable to get irq %d for %s\n",
-		       h->intr[PERF_MODE_INT], h->devname);
+		       h->intr[h->intr_mode], h->devname);
 		goto clean2;
 	}
 
 	dev_info(&pdev->dev, "%s: <0x%x> at IRQ %d%s using DAC\n",
 	       h->devname, pdev->device,
-	       h->intr[PERF_MODE_INT], dac ? "" : " not");
+	       h->intr[h->intr_mode], dac ? "" : " not");
 
 	h->cmd_pool_bits =
 	    kmalloc(((h->nr_cmds + BITS_PER_LONG -
@@ -3810,8 +3849,6 @@ static int __devinit hpsa_init_one(struct pci_dev *pdev,
 	}
 	if (hpsa_allocate_sg_chain_blocks(h))
 		goto clean4;
-	spin_lock_init(&h->lock);
-	spin_lock_init(&h->scan_lock);
 	init_waitqueue_head(&h->scan_wait_queue);
 	h->scan_finished = 1; /* no scan currently in progress */
 
@@ -3843,7 +3880,7 @@ clean4:
 			    h->nr_cmds * sizeof(struct ErrorInfo),
 			    h->errinfo_pool,
 			    h->errinfo_pool_dhandle);
-	free_irq(h->intr[PERF_MODE_INT], h);
+	free_irq(h->intr[h->intr_mode], h);
 clean2:
 clean1:
 	h->busy_initializing = 0;
@@ -3887,7 +3924,7 @@ static void hpsa_shutdown(struct pci_dev *pdev)
 	 */
 	hpsa_flush_cache(h);
 	h->access.set_intr_mask(h, HPSA_INTR_OFF);
-	free_irq(h->intr[PERF_MODE_INT], h);
+	free_irq(h->intr[h->intr_mode], h);
 #ifdef CONFIG_PCI_MSI
 	if (h->msix_vector)
 		pci_disable_msix(h->pdev);
@@ -3989,7 +4026,8 @@ static void  calc_bucket_map(int bucket[], int num_buckets,
 	}
 }
 
-static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h)
+static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h,
+	u32 use_short_tags)
 {
 	int i;
 	unsigned long register_value;
@@ -4037,7 +4075,7 @@ static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h)
 	writel(0, &h->transtable->RepQCtrAddrHigh32);
 	writel(h->reply_pool_dhandle, &h->transtable->RepQAddr0Low32);
 	writel(0, &h->transtable->RepQAddr0High32);
-	writel(CFGTBL_Trans_Performant,
+	writel(CFGTBL_Trans_Performant | use_short_tags,
 		&(h->cfgtable->HostWrite.TransportRequest));
 	writel(CFGTBL_ChangeReq, h->vaddr + SA5_DOORBELL);
 	hpsa_wait_for_mode_change_ack(h);
@@ -4047,12 +4085,18 @@ static __devinit void hpsa_enter_performant_mode(struct ctlr_info *h)
 					" performant mode\n");
 		return;
 	}
+	/* Change the access methods to the performant access methods */
+	h->access = SA5_performant_access;
+	h->transMethod = CFGTBL_Trans_Performant;
 }
 
 static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
 {
 	u32 trans_support;
 
+	if (hpsa_simple_mode)
+		return;
+
 	trans_support = readl(&(h->cfgtable->TransportSupport));
 	if (!(trans_support & PERFORMANT_MODE))
 		return;
@@ -4072,11 +4116,8 @@ static __devinit void hpsa_put_ctlr_into_performant_mode(struct ctlr_info *h)
 		|| (h->blockFetchTable == NULL))
 		goto clean_up;
 
-	hpsa_enter_performant_mode(h);
-
-	/* Change the access methods to the performant access methods */
-	h->access = SA5_performant_access;
-	h->transMethod = CFGTBL_Trans_Performant;
+	hpsa_enter_performant_mode(h,
+		trans_support & CFGTBL_Trans_use_short_tags);
 
 	return;
 
diff --git a/drivers/scsi/hpsa.h b/drivers/scsi/hpsa.h
index 19586e189f0f..621a1530054a 100644
--- a/drivers/scsi/hpsa.h
+++ b/drivers/scsi/hpsa.h
@@ -72,11 +72,12 @@ struct ctlr_info {
 	unsigned int intr[4];
 	unsigned int msix_vector;
 	unsigned int msi_vector;
+	int intr_mode; /* either PERF_MODE_INT or SIMPLE_MODE_INT */
 	struct access_method access;
 
 	/* queue and queue Info */
-	struct hlist_head reqQ;
-	struct hlist_head cmpQ;
+	struct list_head reqQ;
+	struct list_head cmpQ;
 	unsigned int Qdepth;
 	unsigned int maxQsinceinit;
 	unsigned int maxSG;
@@ -154,12 +155,16 @@ struct ctlr_info {
  * HPSA_BOARD_READY_ITERATIONS are derived from those.
  */
 #define HPSA_BOARD_READY_WAIT_SECS (120)
+#define HPSA_BOARD_NOT_READY_WAIT_SECS (10)
 #define HPSA_BOARD_READY_POLL_INTERVAL_MSECS (100)
 #define HPSA_BOARD_READY_POLL_INTERVAL \
 	((HPSA_BOARD_READY_POLL_INTERVAL_MSECS * HZ) / 1000)
 #define HPSA_BOARD_READY_ITERATIONS \
 	((HPSA_BOARD_READY_WAIT_SECS * 1000) / \
 		HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
+#define HPSA_BOARD_NOT_READY_ITERATIONS \
+	((HPSA_BOARD_NOT_READY_WAIT_SECS * 1000) / \
+		HPSA_BOARD_READY_POLL_INTERVAL_MSECS)
 #define HPSA_POST_RESET_PAUSE_MSECS (3000)
 #define HPSA_POST_RESET_NOOP_RETRIES (12)
 
diff --git a/drivers/scsi/hpsa_cmd.h b/drivers/scsi/hpsa_cmd.h
index f5c4c3cc0530..18464900e761 100644
--- a/drivers/scsi/hpsa_cmd.h
+++ b/drivers/scsi/hpsa_cmd.h
@@ -104,6 +104,7 @@
 
 #define CFGTBL_Trans_Simple     0x00000002l
 #define CFGTBL_Trans_Performant 0x00000004l
+#define CFGTBL_Trans_use_short_tags 0x20000000l
 
 #define CFGTBL_BusType_Ultra2   0x00000001l
 #define CFGTBL_BusType_Ultra3   0x00000002l
@@ -265,6 +266,7 @@ struct ErrorInfo {
 
 #define DIRECT_LOOKUP_SHIFT 5
 #define DIRECT_LOOKUP_BIT 0x10
+#define DIRECT_LOOKUP_MASK (~((1 << DIRECT_LOOKUP_SHIFT) - 1))
 
 #define HPSA_ERROR_BIT          0x02
 struct ctlr_info; /* defined in hpsa.h */
@@ -291,7 +293,7 @@ struct CommandList {
 	struct ctlr_info	   *h;
 	int			   cmd_type;
 	long			   cmdindex;
-	struct hlist_node list;
+	struct list_head list;
 	struct request *rq;
 	struct completion *waiting;
 	void   *scsi_cmd;
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index d841e98a8bd5..0621238fac4a 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -1301,7 +1301,7 @@ static void ipr_handle_config_change(struct ipr_ioa_cfg *ioa_cfg,
 			ipr_clear_res_target(res);
 			list_move_tail(&res->queue, &ioa_cfg->free_res_q);
 		}
-	} else if (!res->sdev) {
+	} else if (!res->sdev || res->del_from_ml) {
 		res->add_to_ml = 1;
 		if (ioa_cfg->allow_ml_add_del)
 			schedule_work(&ioa_cfg->work_q);
@@ -3104,7 +3104,10 @@ restart:
 				did_work = 1;
 				sdev = res->sdev;
 				if (!scsi_device_get(sdev)) {
-					list_move_tail(&res->queue, &ioa_cfg->free_res_q);
+					if (!res->add_to_ml)
+						list_move_tail(&res->queue, &ioa_cfg->free_res_q);
+					else
+						res->del_from_ml = 0;
 					spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
 					scsi_remove_device(sdev);
 					scsi_device_put(sdev);
@@ -8864,7 +8867,7 @@ static void __ipr_remove(struct pci_dev *pdev)
 
 	spin_unlock_irqrestore(ioa_cfg->host->host_lock, host_lock_flags);
 	wait_event(ioa_cfg->reset_wait_q, !ioa_cfg->in_reset_reload);
-	flush_scheduled_work();
+	flush_work_sync(&ioa_cfg->work_q);
 	spin_lock_irqsave(ioa_cfg->host->host_lock, host_lock_flags);
 
 	spin_lock(&ipr_driver_lock);
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index fec47de72535..a860452a8f71 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -608,54 +608,12 @@ static void iscsi_sw_tcp_conn_stop(struct iscsi_cls_conn *cls_conn, int flag)
 	iscsi_sw_tcp_release_conn(conn);
 }
 
-static int iscsi_sw_tcp_get_addr(struct iscsi_conn *conn, struct socket *sock,
-				 char *buf, int *port,
-				 int (*getname)(struct socket *,
-						struct sockaddr *,
-						int *addrlen))
-{
-	struct sockaddr_storage *addr;
-	struct sockaddr_in6 *sin6;
-	struct sockaddr_in *sin;
-	int rc = 0, len;
-
-	addr = kmalloc(sizeof(*addr), GFP_KERNEL);
-	if (!addr)
-		return -ENOMEM;
-
-	if (getname(sock, (struct sockaddr *) addr, &len)) {
-		rc = -ENODEV;
-		goto free_addr;
-	}
-
-	switch (addr->ss_family) {
-	case AF_INET:
-		sin = (struct sockaddr_in *)addr;
-		spin_lock_bh(&conn->session->lock);
-		sprintf(buf, "%pI4", &sin->sin_addr.s_addr);
-		*port = be16_to_cpu(sin->sin_port);
-		spin_unlock_bh(&conn->session->lock);
-		break;
-	case AF_INET6:
-		sin6 = (struct sockaddr_in6 *)addr;
-		spin_lock_bh(&conn->session->lock);
-		sprintf(buf, "%pI6", &sin6->sin6_addr);
-		*port = be16_to_cpu(sin6->sin6_port);
-		spin_unlock_bh(&conn->session->lock);
-		break;
-	}
-free_addr:
-	kfree(addr);
-	return rc;
-}
-
 static int
 iscsi_sw_tcp_conn_bind(struct iscsi_cls_session *cls_session,
 		       struct iscsi_cls_conn *cls_conn, uint64_t transport_eph,
 		       int is_leading)
 {
-	struct Scsi_Host *shost = iscsi_session_to_shost(cls_session);
-	struct iscsi_host *ihost = shost_priv(shost);
+	struct iscsi_session *session = cls_session->dd_data;
 	struct iscsi_conn *conn = cls_conn->dd_data;
 	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
 	struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
@@ -670,27 +628,15 @@ iscsi_sw_tcp_conn_bind(struct iscsi_cls_session *cls_session,
 				  "sockfd_lookup failed %d\n", err);
 		return -EEXIST;
 	}
-	/*
-	 * copy these values now because if we drop the session
-	 * userspace may still want to query the values since we will
-	 * be using them for the reconnect
-	 */
-	err = iscsi_sw_tcp_get_addr(conn, sock, conn->portal_address,
-				    &conn->portal_port, kernel_getpeername);
-	if (err)
-		goto free_socket;
-
-	err = iscsi_sw_tcp_get_addr(conn, sock, ihost->local_address,
-				    &ihost->local_port, kernel_getsockname);
-	if (err)
-		goto free_socket;
 
 	err = iscsi_conn_bind(cls_session, cls_conn, is_leading);
 	if (err)
 		goto free_socket;
 
+	spin_lock_bh(&session->lock);
 	/* bind iSCSI connection and socket */
 	tcp_sw_conn->sock = sock;
+	spin_unlock_bh(&session->lock);
 
 	/* setup Socket parameters */
 	sk = sock->sk;
@@ -752,24 +698,74 @@ static int iscsi_sw_tcp_conn_get_param(struct iscsi_cls_conn *cls_conn,
 				       enum iscsi_param param, char *buf)
 {
 	struct iscsi_conn *conn = cls_conn->dd_data;
-	int len;
+	struct iscsi_tcp_conn *tcp_conn = conn->dd_data;
+	struct iscsi_sw_tcp_conn *tcp_sw_conn = tcp_conn->dd_data;
+	struct sockaddr_in6 addr;
+	int rc, len;
 
 	switch(param) {
 	case ISCSI_PARAM_CONN_PORT:
-		spin_lock_bh(&conn->session->lock);
-		len = sprintf(buf, "%hu\n", conn->portal_port);
-		spin_unlock_bh(&conn->session->lock);
-		break;
 	case ISCSI_PARAM_CONN_ADDRESS:
 		spin_lock_bh(&conn->session->lock);
-		len = sprintf(buf, "%s\n", conn->portal_address);
+		if (!tcp_sw_conn || !tcp_sw_conn->sock) {
+			spin_unlock_bh(&conn->session->lock);
+			return -ENOTCONN;
+		}
+		rc = kernel_getpeername(tcp_sw_conn->sock,
+					(struct sockaddr *)&addr, &len);
 		spin_unlock_bh(&conn->session->lock);
-		break;
+		if (rc)
+			return rc;
+
+		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+						 &addr, param, buf);
 	default:
 		return iscsi_conn_get_param(cls_conn, param, buf);
 	}
 
-	return len;
+	return 0;
+}
+
+static int iscsi_sw_tcp_host_get_param(struct Scsi_Host *shost,
+				       enum iscsi_host_param param, char *buf)
+{
+	struct iscsi_sw_tcp_host *tcp_sw_host = iscsi_host_priv(shost);
+	struct iscsi_session *session = tcp_sw_host->session;
+	struct iscsi_conn *conn;
+	struct iscsi_tcp_conn *tcp_conn;
+	struct iscsi_sw_tcp_conn *tcp_sw_conn;
+	struct sockaddr_in6 addr;
+	int rc, len;
+
+	switch (param) {
+	case ISCSI_HOST_PARAM_IPADDRESS:
+		spin_lock_bh(&session->lock);
+		conn = session->leadconn;
+		if (!conn) {
+			spin_unlock_bh(&session->lock);
+			return -ENOTCONN;
+		}
+		tcp_conn = conn->dd_data;
+
+		tcp_sw_conn = tcp_conn->dd_data;
+		if (!tcp_sw_conn->sock) {
+			spin_unlock_bh(&session->lock);
+			return -ENOTCONN;
+		}
+
+		rc = kernel_getsockname(tcp_sw_conn->sock,
+					(struct sockaddr *)&addr, &len);
+		spin_unlock_bh(&session->lock);
+		if (rc)
+			return rc;
+
+		return iscsi_conn_get_addr_param((struct sockaddr_storage *)
+						 &addr, param, buf);
+	default:
+		return iscsi_host_get_param(shost, param, buf);
+	}
+
+	return 0;
 }
 
 static void
@@ -797,6 +793,7 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
 {
 	struct iscsi_cls_session *cls_session;
 	struct iscsi_session *session;
+	struct iscsi_sw_tcp_host *tcp_sw_host;
 	struct Scsi_Host *shost;
 
 	if (ep) {
@@ -804,7 +801,8 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
 		return NULL;
 	}
 
-	shost = iscsi_host_alloc(&iscsi_sw_tcp_sht, 0, 1);
+	shost = iscsi_host_alloc(&iscsi_sw_tcp_sht,
+				 sizeof(struct iscsi_sw_tcp_host), 1);
 	if (!shost)
 		return NULL;
 	shost->transportt = iscsi_sw_tcp_scsi_transport;
@@ -825,6 +823,8 @@ iscsi_sw_tcp_session_create(struct iscsi_endpoint *ep, uint16_t cmds_max,
 	if (!cls_session)
 		goto remove_host;
 	session = cls_session->dd_data;
+	tcp_sw_host = iscsi_host_priv(shost);
+	tcp_sw_host->session = session;
 
 	shost->can_queue = session->scsi_cmds_max;
 	if (iscsi_tcp_r2tpool_alloc(session))
@@ -929,7 +929,7 @@ static struct iscsi_transport iscsi_sw_tcp_transport = {
 	.start_conn		= iscsi_conn_start,
 	.stop_conn		= iscsi_sw_tcp_conn_stop,
 	/* iscsi host params */
-	.get_host_param		= iscsi_host_get_param,
+	.get_host_param		= iscsi_sw_tcp_host_get_param,
 	.set_host_param		= iscsi_host_set_param,
 	/* IO */
 	.send_pdu		= iscsi_conn_send_pdu,
diff --git a/drivers/scsi/iscsi_tcp.h b/drivers/scsi/iscsi_tcp.h
index 94644bad0ed7..666fe09378fa 100644
--- a/drivers/scsi/iscsi_tcp.h
+++ b/drivers/scsi/iscsi_tcp.h
@@ -55,6 +55,10 @@ struct iscsi_sw_tcp_conn {
 	ssize_t (*sendpage)(struct socket *, struct page *, int, size_t, int);
 };
 
+struct iscsi_sw_tcp_host {
+	struct iscsi_session	*session;
+};
+
 struct iscsi_sw_tcp_hdrbuf {
 	struct iscsi_hdr	hdrbuf;
 	char			hdrextbuf[ISCSI_MAX_AHS_SIZE +
diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c
index d21367d3305f..08bf5fa6afd4 100644
--- a/drivers/scsi/libfc/fc_exch.c
+++ b/drivers/scsi/libfc/fc_exch.c
@@ -38,7 +38,7 @@ u16	fc_cpu_mask;		/* cpu mask for possible cpus */
 EXPORT_SYMBOL(fc_cpu_mask);
 static u16	fc_cpu_order;	/* 2's power to represent total possible cpus */
 static struct kmem_cache *fc_em_cachep;	       /* cache for exchanges */
-struct workqueue_struct *fc_exch_workqueue;
+static struct workqueue_struct *fc_exch_workqueue;
 
 /*
  * Structure and function definitions for managing Fibre Channel Exchanges
@@ -558,6 +558,22 @@ static struct fc_seq *fc_seq_start_next(struct fc_seq *sp)
 	return sp;
 }
 
+/*
+ * Set the response handler for the exchange associated with a sequence.
+ */
+static void fc_seq_set_resp(struct fc_seq *sp,
+			    void (*resp)(struct fc_seq *, struct fc_frame *,
+					 void *),
+			    void *arg)
+{
+	struct fc_exch *ep = fc_seq_exch(sp);
+
+	spin_lock_bh(&ep->ex_lock);
+	ep->resp = resp;
+	ep->arg = arg;
+	spin_unlock_bh(&ep->ex_lock);
+}
+
 /**
  * fc_seq_exch_abort() - Abort an exchange and sequence
  * @req_sp:	The sequence to be aborted
@@ -1266,6 +1282,8 @@ free:
  * @fp:    The request frame
  *
  * On success, the sequence pointer will be returned and also in fr_seq(@fp).
+ * A reference will be held on the exchange/sequence for the caller, which
+ * must call fc_seq_release().
  */
 static struct fc_seq *fc_seq_assign(struct fc_lport *lport, struct fc_frame *fp)
 {
@@ -1283,6 +1301,15 @@ static struct fc_seq *fc_seq_assign(struct fc_lport *lport, struct fc_frame *fp)
 }
 
 /**
+ * fc_seq_release() - Release the hold
+ * @sp:    The sequence.
+ */
+static void fc_seq_release(struct fc_seq *sp)
+{
+	fc_exch_release(fc_seq_exch(sp));
+}
+
+/**
  * fc_exch_recv_req() - Handler for an incoming request
  * @lport: The local port that received the request
  * @mp:	   The EM that the exchange is on
@@ -2254,16 +2281,45 @@ void fc_exch_mgr_free(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_exch_mgr_free);
 
 /**
+ * fc_find_ema() - Lookup and return appropriate Exchange Manager Anchor depending
+ * upon 'xid'.
+ * @f_ctl: f_ctl
+ * @lport: The local port the frame was received on
+ * @fh: The received frame header
+ */
+static struct fc_exch_mgr_anchor *fc_find_ema(u32 f_ctl,
+					      struct fc_lport *lport,
+					      struct fc_frame_header *fh)
+{
+	struct fc_exch_mgr_anchor *ema;
+	u16 xid;
+
+	if (f_ctl & FC_FC_EX_CTX)
+		xid = ntohs(fh->fh_ox_id);
+	else {
+		xid = ntohs(fh->fh_rx_id);
+		if (xid == FC_XID_UNKNOWN)
+			return list_entry(lport->ema_list.prev,
+					  typeof(*ema), ema_list);
+	}
+
+	list_for_each_entry(ema, &lport->ema_list, ema_list) {
+		if ((xid >= ema->mp->min_xid) &&
+		    (xid <= ema->mp->max_xid))
+			return ema;
+	}
+	return NULL;
+}
+/**
  * fc_exch_recv() - Handler for received frames
  * @lport: The local port the frame was received on
- * @fp:	   The received frame
+ * @fp:	The received frame
  */
 void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 {
 	struct fc_frame_header *fh = fc_frame_header_get(fp);
 	struct fc_exch_mgr_anchor *ema;
-	u32 f_ctl, found = 0;
-	u16 oxid;
+	u32 f_ctl;
 
 	/* lport lock ? */
 	if (!lport || lport->state == LPORT_ST_DISABLED) {
@@ -2274,24 +2330,17 @@ void fc_exch_recv(struct fc_lport *lport, struct fc_frame *fp)
 	}
 
 	f_ctl = ntoh24(fh->fh_f_ctl);
-	oxid = ntohs(fh->fh_ox_id);
-	if (f_ctl & FC_FC_EX_CTX) {
-		list_for_each_entry(ema, &lport->ema_list, ema_list) {
-			if ((oxid >= ema->mp->min_xid) &&
-			    (oxid <= ema->mp->max_xid)) {
-				found = 1;
-				break;
-			}
-		}
-
-		if (!found) {
-			FC_LPORT_DBG(lport, "Received response for out "
-				     "of range oxid:%hx\n", oxid);
-			fc_frame_free(fp);
-			return;
-		}
-	} else
-		ema = list_entry(lport->ema_list.prev, typeof(*ema), ema_list);
+	ema = fc_find_ema(f_ctl, lport, fh);
+	if (!ema) {
+		FC_LPORT_DBG(lport, "Unable to find Exchange Manager Anchor,"
+				    "fc_ctl <0x%x>, xid <0x%x>\n",
+				     f_ctl,
+				     (f_ctl & FC_FC_EX_CTX) ?
+				     ntohs(fh->fh_ox_id) :
+				     ntohs(fh->fh_rx_id));
+		fc_frame_free(fp);
+		return;
+	}
 
 	/*
 	 * If frame is marked invalid, just drop it.
@@ -2329,6 +2378,9 @@ int fc_exch_init(struct fc_lport *lport)
 	if (!lport->tt.seq_start_next)
 		lport->tt.seq_start_next = fc_seq_start_next;
 
+	if (!lport->tt.seq_set_resp)
+		lport->tt.seq_set_resp = fc_seq_set_resp;
+
 	if (!lport->tt.exch_seq_send)
 		lport->tt.exch_seq_send = fc_exch_seq_send;
 
@@ -2350,6 +2402,9 @@ int fc_exch_init(struct fc_lport *lport)
 	if (!lport->tt.seq_assign)
 		lport->tt.seq_assign = fc_seq_assign;
 
+	if (!lport->tt.seq_release)
+		lport->tt.seq_release = fc_seq_release;
+
 	return 0;
 }
 EXPORT_SYMBOL(fc_exch_init);
@@ -2357,7 +2412,7 @@ EXPORT_SYMBOL(fc_exch_init);
 /**
  * fc_setup_exch_mgr() - Setup an exchange manager
  */
-int fc_setup_exch_mgr()
+int fc_setup_exch_mgr(void)
 {
 	fc_em_cachep = kmem_cache_create("libfc_em", sizeof(struct fc_exch),
 					 0, SLAB_HWCACHE_ALIGN, NULL);
@@ -2395,7 +2450,7 @@ int fc_setup_exch_mgr()
 /**
  * fc_destroy_exch_mgr() - Destroy an exchange manager
  */
-void fc_destroy_exch_mgr()
+void fc_destroy_exch_mgr(void)
 {
 	destroy_workqueue(fc_exch_workqueue);
 	kmem_cache_destroy(fc_em_cachep);
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index 5962d1a5a674..b1b03af158bf 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -42,7 +42,7 @@
 
 #include "fc_libfc.h"
 
-struct kmem_cache *scsi_pkt_cachep;
+static struct kmem_cache *scsi_pkt_cachep;
 
 /* SRB state definitions */
 #define FC_SRB_FREE		0		/* cmd is free */
@@ -155,6 +155,7 @@ static struct fc_fcp_pkt *fc_fcp_pkt_alloc(struct fc_lport *lport, gfp_t gfp)
 	if (fsp) {
 		memset(fsp, 0, sizeof(*fsp));
 		fsp->lp = lport;
+		fsp->xfer_ddp = FC_XID_UNKNOWN;
 		atomic_set(&fsp->ref_cnt, 1);
 		init_timer(&fsp->timer);
 		INIT_LIST_HEAD(&fsp->list);
@@ -1201,6 +1202,7 @@ unlock:
 static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
 {
 	int rc = FAILED;
+	unsigned long ticks_left;
 
 	if (fc_fcp_send_abort(fsp))
 		return FAILED;
@@ -1209,13 +1211,13 @@ static int fc_fcp_pkt_abort(struct fc_fcp_pkt *fsp)
 	fsp->wait_for_comp = 1;
 
 	spin_unlock_bh(&fsp->scsi_pkt_lock);
-	rc = wait_for_completion_timeout(&fsp->tm_done, FC_SCSI_TM_TOV);
+	ticks_left = wait_for_completion_timeout(&fsp->tm_done,
+							FC_SCSI_TM_TOV);
 	spin_lock_bh(&fsp->scsi_pkt_lock);
 	fsp->wait_for_comp = 0;
 
-	if (!rc) {
+	if (!ticks_left) {
 		FC_FCP_DBG(fsp, "target abort cmd  failed\n");
-		rc = FAILED;
 	} else if (fsp->state & FC_SRB_ABORTED) {
 		FC_FCP_DBG(fsp, "target abort cmd  passed\n");
 		rc = SUCCESS;
@@ -1321,7 +1323,7 @@ static void fc_tm_done(struct fc_seq *seq, struct fc_frame *fp, void *arg)
 		 *
 		 * scsi-eh will escalate for when either happens.
 		 */
-		goto out;
+		return;
 	}
 
 	if (fc_fcp_lock_pkt(fsp))
@@ -1787,15 +1789,14 @@ static inline int fc_fcp_lport_queue_ready(struct fc_lport *lport)
 
 /**
  * fc_queuecommand() - The queuecommand function of the SCSI template
+ * @shost: The Scsi_Host that the command was issued to
  * @cmd:   The scsi_cmnd to be executed
- * @done:  The callback function to be called when the scsi_cmnd is complete
  *
- * This is the i/o strategy routine, called by the SCSI layer. This routine
- * is called with the host_lock held.
+ * This is the i/o strategy routine, called by the SCSI layer.
  */
-static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scsi_cmnd *))
+int fc_queuecommand(struct Scsi_Host *shost, struct scsi_cmnd *sc_cmd)
 {
-	struct fc_lport *lport;
+	struct fc_lport *lport = shost_priv(shost);
 	struct fc_rport *rport = starget_to_rport(scsi_target(sc_cmd->device));
 	struct fc_fcp_pkt *fsp;
 	struct fc_rport_libfc_priv *rpriv;
@@ -1803,15 +1804,12 @@ static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scs
 	int rc = 0;
 	struct fcoe_dev_stats *stats;
 
-	lport = shost_priv(sc_cmd->device->host);
-
 	rval = fc_remote_port_chkready(rport);
 	if (rval) {
 		sc_cmd->result = rval;
-		done(sc_cmd);
+		sc_cmd->scsi_done(sc_cmd);
 		return 0;
 	}
-	spin_unlock_irq(lport->host->host_lock);
 
 	if (!*(struct fc_remote_port **)rport->dd_data) {
 		/*
@@ -1819,7 +1817,7 @@ static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scs
 		 * online
 		 */
 		sc_cmd->result = DID_IMM_RETRY << 16;
-		done(sc_cmd);
+		sc_cmd->scsi_done(sc_cmd);
 		goto out;
 	}
 
@@ -1842,10 +1840,7 @@ static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scs
 	 * build the libfc request pkt
 	 */
 	fsp->cmd = sc_cmd;	/* save the cmd */
-	fsp->lp = lport;	/* save the softc ptr */
 	fsp->rport = rport;	/* set the remote port ptr */
-	fsp->xfer_ddp = FC_XID_UNKNOWN;
-	sc_cmd->scsi_done = done;
 
 	/*
 	 * set up the transfer length
@@ -1886,11 +1881,8 @@ static int fc_queuecommand_lck(struct scsi_cmnd *sc_cmd, void (*done)(struct scs
 		rc = SCSI_MLQUEUE_HOST_BUSY;
 	}
 out:
-	spin_lock_irq(lport->host->host_lock);
 	return rc;
 }
-
-DEF_SCSI_QCMD(fc_queuecommand)
 EXPORT_SYMBOL(fc_queuecommand);
 
 /**
@@ -2112,7 +2104,6 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd)
 	 * the sc passed in is not setup for execution like when sent
 	 * through the queuecommand callout.
 	 */
-	fsp->lp = lport;	/* save the softc ptr */
 	fsp->rport = rport;	/* set the remote port ptr */
 
 	/*
@@ -2245,7 +2236,7 @@ void fc_fcp_destroy(struct fc_lport *lport)
 }
 EXPORT_SYMBOL(fc_fcp_destroy);
 
-int fc_setup_fcp()
+int fc_setup_fcp(void)
 {
 	int rc = 0;
 
@@ -2261,7 +2252,7 @@ int fc_setup_fcp()
 	return rc;
 }
 
-void fc_destroy_fcp()
+void fc_destroy_fcp(void)
 {
 	if (scsi_pkt_cachep)
 		kmem_cache_destroy(scsi_pkt_cachep);
diff --git a/drivers/scsi/libfc/fc_libfc.c b/drivers/scsi/libfc/fc_libfc.c
index 6a48c28e4420..b7735129f1f3 100644
--- a/drivers/scsi/libfc/fc_libfc.c
+++ b/drivers/scsi/libfc/fc_libfc.c
@@ -35,6 +35,27 @@ unsigned int fc_debug_logging;
 module_param_named(debug_logging, fc_debug_logging, int, S_IRUGO|S_IWUSR);
 MODULE_PARM_DESC(debug_logging, "a bit mask of logging levels");
 
+DEFINE_MUTEX(fc_prov_mutex);
+static LIST_HEAD(fc_local_ports);
+struct blocking_notifier_head fc_lport_notifier_head =
+		BLOCKING_NOTIFIER_INIT(fc_lport_notifier_head);
+EXPORT_SYMBOL(fc_lport_notifier_head);
+
+/*
+ * Providers which primarily send requests and PRLIs.
+ */
+struct fc4_prov *fc_active_prov[FC_FC4_PROV_SIZE] = {
+	[0] = &fc_rport_t0_prov,
+	[FC_TYPE_FCP] = &fc_rport_fcp_init,
+};
+
+/*
+ * Providers which receive requests.
+ */
+struct fc4_prov *fc_passive_prov[FC_FC4_PROV_SIZE] = {
+	[FC_TYPE_ELS] = &fc_lport_els_prov,
+};
+
 /**
  * libfc_init() - Initialize libfc.ko
  */
@@ -210,3 +231,102 @@ void fc_fill_reply_hdr(struct fc_frame *fp, const struct fc_frame *in_fp,
 	fc_fill_hdr(fp, in_fp, r_ctl, FC_FCTL_RESP, 0, parm_offset);
 }
 EXPORT_SYMBOL(fc_fill_reply_hdr);
+
+/**
+ * fc_fc4_conf_lport_params() - Modify "service_params" of specified lport
+ * if there is service provider (target provider) registered with libfc
+ * for specified "fc_ft_type"
+ * @lport: Local port which service_params needs to be modified
+ * @type: FC-4 type, such as FC_TYPE_FCP
+ */
+void fc_fc4_conf_lport_params(struct fc_lport *lport, enum fc_fh_type type)
+{
+	struct fc4_prov *prov_entry;
+	BUG_ON(type >= FC_FC4_PROV_SIZE);
+	BUG_ON(!lport);
+	prov_entry = fc_passive_prov[type];
+	if (type == FC_TYPE_FCP) {
+		if (prov_entry && prov_entry->recv)
+			lport->service_params |= FCP_SPPF_TARG_FCN;
+	}
+}
+
+void fc_lport_iterate(void (*notify)(struct fc_lport *, void *), void *arg)
+{
+	struct fc_lport *lport;
+
+	mutex_lock(&fc_prov_mutex);
+	list_for_each_entry(lport, &fc_local_ports, lport_list)
+		notify(lport, arg);
+	mutex_unlock(&fc_prov_mutex);
+}
+EXPORT_SYMBOL(fc_lport_iterate);
+
+/**
+ * fc_fc4_register_provider() - register FC-4 upper-level provider.
+ * @type: FC-4 type, such as FC_TYPE_FCP
+ * @prov: structure describing provider including ops vector.
+ *
+ * Returns 0 on success, negative error otherwise.
+ */
+int fc_fc4_register_provider(enum fc_fh_type type, struct fc4_prov *prov)
+{
+	struct fc4_prov **prov_entry;
+	int ret = 0;
+
+	if (type >= FC_FC4_PROV_SIZE)
+		return -EINVAL;
+	mutex_lock(&fc_prov_mutex);
+	prov_entry = (prov->recv ? fc_passive_prov : fc_active_prov) + type;
+	if (*prov_entry)
+		ret = -EBUSY;
+	else
+		*prov_entry = prov;
+	mutex_unlock(&fc_prov_mutex);
+	return ret;
+}
+EXPORT_SYMBOL(fc_fc4_register_provider);
+
+/**
+ * fc_fc4_deregister_provider() - deregister FC-4 upper-level provider.
+ * @type: FC-4 type, such as FC_TYPE_FCP
+ * @prov: structure describing provider including ops vector.
+ */
+void fc_fc4_deregister_provider(enum fc_fh_type type, struct fc4_prov *prov)
+{
+	BUG_ON(type >= FC_FC4_PROV_SIZE);
+	mutex_lock(&fc_prov_mutex);
+	if (prov->recv)
+		rcu_assign_pointer(fc_passive_prov[type], NULL);
+	else
+		rcu_assign_pointer(fc_active_prov[type], NULL);
+	mutex_unlock(&fc_prov_mutex);
+	synchronize_rcu();
+}
+EXPORT_SYMBOL(fc_fc4_deregister_provider);
+
+/**
+ * fc_fc4_add_lport() - add new local port to list and run notifiers.
+ * @lport:  The new local port.
+ */
+void fc_fc4_add_lport(struct fc_lport *lport)
+{
+	mutex_lock(&fc_prov_mutex);
+	list_add_tail(&lport->lport_list, &fc_local_ports);
+	blocking_notifier_call_chain(&fc_lport_notifier_head,
+				     FC_LPORT_EV_ADD, lport);
+	mutex_unlock(&fc_prov_mutex);
+}
+
+/**
+ * fc_fc4_del_lport() - remove local port from list and run notifiers.
+ * @lport:  The new local port.
+ */
+void fc_fc4_del_lport(struct fc_lport *lport)
+{
+	mutex_lock(&fc_prov_mutex);
+	list_del(&lport->lport_list);
+	blocking_notifier_call_chain(&fc_lport_notifier_head,
+				     FC_LPORT_EV_DEL, lport);
+	mutex_unlock(&fc_prov_mutex);
+}
diff --git a/drivers/scsi/libfc/fc_libfc.h b/drivers/scsi/libfc/fc_libfc.h
index eea0c3541b71..fedc819d70c0 100644
--- a/drivers/scsi/libfc/fc_libfc.h
+++ b/drivers/scsi/libfc/fc_libfc.h
@@ -94,6 +94,17 @@ extern unsigned int fc_debug_logging;
 				(lport)->host->host_no,	##args))
 
 /*
+ * FC-4 Providers.
+ */
+extern struct fc4_prov *fc_active_prov[];	/* providers without recv */
+extern struct fc4_prov *fc_passive_prov[];	/* providers with recv */
+extern struct mutex fc_prov_mutex;		/* lock over table changes */
+
+extern struct fc4_prov fc_rport_t0_prov;	/* type 0 provider */
+extern struct fc4_prov fc_lport_els_prov;	/* ELS provider */
+extern struct fc4_prov fc_rport_fcp_init;	/* FCP initiator provider */
+
+/*
  * Set up direct-data placement for this I/O request
  */
 void fc_fcp_ddp_setup(struct fc_fcp_pkt *fsp, u16 xid);
@@ -112,6 +123,9 @@ void fc_destroy_fcp(void);
  * Internal libfc functions
  */
 const char *fc_els_resp_type(struct fc_frame *);
+extern void fc_fc4_add_lport(struct fc_lport *);
+extern void fc_fc4_del_lport(struct fc_lport *);
+extern void fc_fc4_conf_lport_params(struct fc_lport *, enum fc_fh_type);
 
 /*
  * Copies a buffer into an sg list
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index c5a10f94f845..735f1f82ccfd 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -633,6 +633,7 @@ int fc_lport_destroy(struct fc_lport *lport)
 	lport->tt.fcp_abort_io(lport);
 	lport->tt.disc_stop_final(lport);
 	lport->tt.exch_mgr_reset(lport, 0, 0);
+	fc_fc4_del_lport(lport);
 	return 0;
 }
 EXPORT_SYMBOL(fc_lport_destroy);
@@ -849,7 +850,7 @@ out:
 }
 
 /**
- * fc_lport_recv_req() - The generic lport request handler
+ * fc_lport_recv_els_req() - The generic lport ELS request handler
  * @lport: The local port that received the request
  * @fp:	   The request frame
  *
@@ -859,9 +860,9 @@ out:
  * Locking Note: This function should not be called with the lport
  *		 lock held becuase it will grab the lock.
  */
-static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
+static void fc_lport_recv_els_req(struct fc_lport *lport,
+				  struct fc_frame *fp)
 {
-	struct fc_frame_header *fh = fc_frame_header_get(fp);
 	void (*recv)(struct fc_lport *, struct fc_frame *);
 
 	mutex_lock(&lport->lp_mutex);
@@ -873,8 +874,7 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
 	 */
 	if (!lport->link_up)
 		fc_frame_free(fp);
-	else if (fh->fh_type == FC_TYPE_ELS &&
-		 fh->fh_r_ctl == FC_RCTL_ELS_REQ) {
+	else {
 		/*
 		 * Check opcode.
 		 */
@@ -903,14 +903,62 @@ static void fc_lport_recv_req(struct fc_lport *lport, struct fc_frame *fp)
 		}
 
 		recv(lport, fp);
-	} else {
-		FC_LPORT_DBG(lport, "dropping invalid frame (eof %x)\n",
-			     fr_eof(fp));
-		fc_frame_free(fp);
 	}
 	mutex_unlock(&lport->lp_mutex);
 }
 
+static int fc_lport_els_prli(struct fc_rport_priv *rdata, u32 spp_len,
+			     const struct fc_els_spp *spp_in,
+			     struct fc_els_spp *spp_out)
+{
+	return FC_SPP_RESP_INVL;
+}
+
+struct fc4_prov fc_lport_els_prov = {
+	.prli = fc_lport_els_prli,
+	.recv = fc_lport_recv_els_req,
+};
+
+/**
+ * fc_lport_recv_req() - The generic lport request handler
+ * @lport: The lport that received the request
+ * @fp: The frame the request is in
+ *
+ * Locking Note: This function should not be called with the lport
+ *		 lock held becuase it may grab the lock.
+ */
+static void fc_lport_recv_req(struct fc_lport *lport,
+			      struct fc_frame *fp)
+{
+	struct fc_frame_header *fh = fc_frame_header_get(fp);
+	struct fc_seq *sp = fr_seq(fp);
+	struct fc4_prov *prov;
+
+	/*
+	 * Use RCU read lock and module_lock to be sure module doesn't
+	 * deregister and get unloaded while we're calling it.
+	 * try_module_get() is inlined and accepts a NULL parameter.
+	 * Only ELSes and FCP target ops should come through here.
+	 * The locking is unfortunate, and a better scheme is being sought.
+	 */
+
+	rcu_read_lock();
+	if (fh->fh_type >= FC_FC4_PROV_SIZE)
+		goto drop;
+	prov = rcu_dereference(fc_passive_prov[fh->fh_type]);
+	if (!prov || !try_module_get(prov->module))
+		goto drop;
+	rcu_read_unlock();
+	prov->recv(lport, fp);
+	module_put(prov->module);
+	return;
+drop:
+	rcu_read_unlock();
+	FC_LPORT_DBG(lport, "dropping unexpected frame type %x\n", fh->fh_type);
+	fc_frame_free(fp);
+	lport->tt.exch_done(sp);
+}
+
 /**
  * fc_lport_reset() - Reset a local port
  * @lport: The local port which should be reset
@@ -1549,6 +1597,7 @@ int fc_lport_config(struct fc_lport *lport)
 
 	fc_lport_add_fc4_type(lport, FC_TYPE_FCP);
 	fc_lport_add_fc4_type(lport, FC_TYPE_CT);
+	fc_fc4_conf_lport_params(lport, FC_TYPE_FCP);
 
 	return 0;
 }
@@ -1586,6 +1635,7 @@ int fc_lport_init(struct fc_lport *lport)
 		fc_host_supported_speeds(lport->host) |= FC_PORTSPEED_1GBIT;
 	if (lport->link_supported_speeds & FC_PORTSPEED_10GBIT)
 		fc_host_supported_speeds(lport->host) |= FC_PORTSPEED_10GBIT;
+	fc_fc4_add_lport(lport);
 
 	return 0;
 }
diff --git a/drivers/scsi/libfc/fc_npiv.c b/drivers/scsi/libfc/fc_npiv.c
index dd2b43bb1c70..076cd5ff0e40 100644
--- a/drivers/scsi/libfc/fc_npiv.c
+++ b/drivers/scsi/libfc/fc_npiv.c
@@ -86,6 +86,7 @@ struct fc_lport *fc_vport_id_lookup(struct fc_lport *n_port, u32 port_id)
 
 	return lport;
 }
+EXPORT_SYMBOL(fc_vport_id_lookup);
 
 /*
  * When setting the link state of vports during an lport state change, it's
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index a7175adab32d..59b16bbb66a3 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -58,7 +58,7 @@
 
 #include "fc_libfc.h"
 
-struct workqueue_struct *rport_event_queue;
+static struct workqueue_struct *rport_event_queue;
 
 static void fc_rport_enter_flogi(struct fc_rport_priv *);
 static void fc_rport_enter_plogi(struct fc_rport_priv *);
@@ -145,8 +145,10 @@ static struct fc_rport_priv *fc_rport_create(struct fc_lport *lport,
 	rdata->maxframe_size = FC_MIN_MAX_PAYLOAD;
 	INIT_DELAYED_WORK(&rdata->retry_work, fc_rport_timeout);
 	INIT_WORK(&rdata->event_work, fc_rport_work);
-	if (port_id != FC_FID_DIR_SERV)
+	if (port_id != FC_FID_DIR_SERV) {
+		rdata->lld_event_callback = lport->tt.rport_event_callback;
 		list_add_rcu(&rdata->peers, &lport->disc.rports);
+	}
 	return rdata;
 }
 
@@ -257,6 +259,8 @@ static void fc_rport_work(struct work_struct *work)
 	struct fc_rport_operations *rport_ops;
 	struct fc_rport_identifiers ids;
 	struct fc_rport *rport;
+	struct fc4_prov *prov;
+	u8 type;
 
 	mutex_lock(&rdata->rp_mutex);
 	event = rdata->event;
@@ -300,12 +304,25 @@ static void fc_rport_work(struct work_struct *work)
 			FC_RPORT_DBG(rdata, "callback ev %d\n", event);
 			rport_ops->event_callback(lport, rdata, event);
 		}
+		if (rdata->lld_event_callback) {
+			FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
+			rdata->lld_event_callback(lport, rdata, event);
+		}
 		kref_put(&rdata->kref, lport->tt.rport_destroy);
 		break;
 
 	case RPORT_EV_FAILED:
 	case RPORT_EV_LOGO:
 	case RPORT_EV_STOP:
+		if (rdata->prli_count) {
+			mutex_lock(&fc_prov_mutex);
+			for (type = 1; type < FC_FC4_PROV_SIZE; type++) {
+				prov = fc_passive_prov[type];
+				if (prov && prov->prlo)
+					prov->prlo(rdata);
+			}
+			mutex_unlock(&fc_prov_mutex);
+		}
 		port_id = rdata->ids.port_id;
 		mutex_unlock(&rdata->rp_mutex);
 
@@ -313,6 +330,10 @@ static void fc_rport_work(struct work_struct *work)
 			FC_RPORT_DBG(rdata, "callback ev %d\n", event);
 			rport_ops->event_callback(lport, rdata, event);
 		}
+		if (rdata->lld_event_callback) {
+			FC_RPORT_DBG(rdata, "lld callback ev %d\n", event);
+			rdata->lld_event_callback(lport, rdata, event);
+		}
 		cancel_delayed_work_sync(&rdata->retry_work);
 
 		/*
@@ -575,7 +596,7 @@ static void fc_rport_error_retry(struct fc_rport_priv *rdata,
 
 	/* make sure this isn't an FC_EX_CLOSED error, never retry those */
 	if (PTR_ERR(fp) == -FC_EX_CLOSED)
-		return fc_rport_error(rdata, fp);
+		goto out;
 
 	if (rdata->retries < rdata->local_port->max_rport_retry_count) {
 		FC_RPORT_DBG(rdata, "Error %ld in state %s, retrying\n",
@@ -588,7 +609,8 @@ static void fc_rport_error_retry(struct fc_rport_priv *rdata,
 		return;
 	}
 
-	return fc_rport_error(rdata, fp);
+out:
+	fc_rport_error(rdata, fp);
 }
 
 /**
@@ -878,6 +900,9 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
 		rdata->ids.port_name = get_unaligned_be64(&plp->fl_wwpn);
 		rdata->ids.node_name = get_unaligned_be64(&plp->fl_wwnn);
 
+		/* save plogi response sp_features for further reference */
+		rdata->sp_features = ntohs(plp->fl_csp.sp_features);
+
 		if (lport->point_to_multipoint)
 			fc_rport_login_complete(rdata, fp);
 		csp_seq = ntohs(plp->fl_csp.sp_tot_seq);
@@ -949,6 +974,8 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		struct fc_els_prli prli;
 		struct fc_els_spp spp;
 	} *pp;
+	struct fc_els_spp temp_spp;
+	struct fc4_prov *prov;
 	u32 roles = FC_RPORT_ROLE_UNKNOWN;
 	u32 fcp_parm = 0;
 	u8 op;
@@ -983,6 +1010,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		resp_code = (pp->spp.spp_flags & FC_SPP_RESP_MASK);
 		FC_RPORT_DBG(rdata, "PRLI spp_flags = 0x%x\n",
 			     pp->spp.spp_flags);
+		rdata->spp_type = pp->spp.spp_type;
 		if (resp_code != FC_SPP_RESP_ACK) {
 			if (resp_code == FC_SPP_RESP_CONF)
 				fc_rport_error(rdata, fp);
@@ -996,6 +1024,15 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
 		fcp_parm = ntohl(pp->spp.spp_params);
 		if (fcp_parm & FCP_SPPF_RETRY)
 			rdata->flags |= FC_RP_FLAGS_RETRY;
+		if (fcp_parm & FCP_SPPF_CONF_COMPL)
+			rdata->flags |= FC_RP_FLAGS_CONF_REQ;
+
+		prov = fc_passive_prov[FC_TYPE_FCP];
+		if (prov) {
+			memset(&temp_spp, 0, sizeof(temp_spp));
+			prov->prli(rdata, pp->prli.prli_spp_len,
+				   &pp->spp, &temp_spp);
+		}
 
 		rdata->supported_classes = FC_COS_CLASS3;
 		if (fcp_parm & FCP_SPPF_INIT_FCN)
@@ -1033,6 +1070,7 @@ static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
 		struct fc_els_spp spp;
 	} *pp;
 	struct fc_frame *fp;
+	struct fc4_prov *prov;
 
 	/*
 	 * If the rport is one of the well known addresses
@@ -1054,9 +1092,20 @@ static void fc_rport_enter_prli(struct fc_rport_priv *rdata)
 		return;
 	}
 
-	if (!lport->tt.elsct_send(lport, rdata->ids.port_id, fp, ELS_PRLI,
-				  fc_rport_prli_resp, rdata,
-				  2 * lport->r_a_tov))
+	fc_prli_fill(lport, fp);
+
+	prov = fc_passive_prov[FC_TYPE_FCP];
+	if (prov) {
+		pp = fc_frame_payload_get(fp, sizeof(*pp));
+		prov->prli(rdata, sizeof(pp->spp), NULL, &pp->spp);
+	}
+
+	fc_fill_fc_hdr(fp, FC_RCTL_ELS_REQ, rdata->ids.port_id,
+		       fc_host_port_id(lport->host), FC_TYPE_ELS,
+		       FC_FC_FIRST_SEQ | FC_FC_END_SEQ | FC_FC_SEQ_INIT, 0);
+
+	if (!lport->tt.exch_seq_send(lport, fp, fc_rport_prli_resp,
+				    NULL, rdata, 2 * lport->r_a_tov))
 		fc_rport_error_retry(rdata, NULL);
 	else
 		kref_get(&rdata->kref);
@@ -1642,9 +1691,9 @@ static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
 	unsigned int len;
 	unsigned int plen;
 	enum fc_els_spp_resp resp;
+	enum fc_els_spp_resp passive;
 	struct fc_seq_els_data rjt_data;
-	u32 fcp_parm;
-	u32 roles = FC_RPORT_ROLE_UNKNOWN;
+	struct fc4_prov *prov;
 
 	FC_RPORT_DBG(rdata, "Received PRLI request while in state %s\n",
 		     fc_rport_state(rdata));
@@ -1678,46 +1727,42 @@ static void fc_rport_recv_prli_req(struct fc_rport_priv *rdata,
 	pp->prli.prli_len = htons(len);
 	len -= sizeof(struct fc_els_prli);
 
-	/* reinitialize remote port roles */
-	rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
-
 	/*
 	 * Go through all the service parameter pages and build
 	 * response.  If plen indicates longer SPP than standard,
 	 * use that.  The entire response has been pre-cleared above.
 	 */
 	spp = &pp->spp;
+	mutex_lock(&fc_prov_mutex);
 	while (len >= plen) {
+		rdata->spp_type = rspp->spp_type;
 		spp->spp_type = rspp->spp_type;
 		spp->spp_type_ext = rspp->spp_type_ext;
-		spp->spp_flags = rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
-		resp = FC_SPP_RESP_ACK;
-
-		switch (rspp->spp_type) {
-		case 0:	/* common to all FC-4 types */
-			break;
-		case FC_TYPE_FCP:
-			fcp_parm = ntohl(rspp->spp_params);
-			if (fcp_parm & FCP_SPPF_RETRY)
-				rdata->flags |= FC_RP_FLAGS_RETRY;
-			rdata->supported_classes = FC_COS_CLASS3;
-			if (fcp_parm & FCP_SPPF_INIT_FCN)
-				roles |= FC_RPORT_ROLE_FCP_INITIATOR;
-			if (fcp_parm & FCP_SPPF_TARG_FCN)
-				roles |= FC_RPORT_ROLE_FCP_TARGET;
-			rdata->ids.roles = roles;
-
-			spp->spp_params = htonl(lport->service_params);
-			break;
-		default:
-			resp = FC_SPP_RESP_INVL;
-			break;
+		resp = 0;
+
+		if (rspp->spp_type < FC_FC4_PROV_SIZE) {
+			prov = fc_active_prov[rspp->spp_type];
+			if (prov)
+				resp = prov->prli(rdata, plen, rspp, spp);
+			prov = fc_passive_prov[rspp->spp_type];
+			if (prov) {
+				passive = prov->prli(rdata, plen, rspp, spp);
+				if (!resp || passive == FC_SPP_RESP_ACK)
+					resp = passive;
+			}
+		}
+		if (!resp) {
+			if (spp->spp_flags & FC_SPP_EST_IMG_PAIR)
+				resp |= FC_SPP_RESP_CONF;
+			else
+				resp |= FC_SPP_RESP_INVL;
 		}
 		spp->spp_flags |= resp;
 		len -= plen;
 		rspp = (struct fc_els_spp *)((char *)rspp + plen);
 		spp = (struct fc_els_spp *)((char *)spp + plen);
 	}
+	mutex_unlock(&fc_prov_mutex);
 
 	/*
 	 * Send LS_ACC.	 If this fails, the originator should retry.
@@ -1887,9 +1932,82 @@ int fc_rport_init(struct fc_lport *lport)
 EXPORT_SYMBOL(fc_rport_init);
 
 /**
+ * fc_rport_fcp_prli() - Handle incoming PRLI for the FCP initiator.
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page
+ * @spp: response service parameter page
+ *
+ * Returns the value for the response code to be placed in spp_flags;
+ * Returns 0 if not an initiator.
+ */
+static int fc_rport_fcp_prli(struct fc_rport_priv *rdata, u32 spp_len,
+			     const struct fc_els_spp *rspp,
+			     struct fc_els_spp *spp)
+{
+	struct fc_lport *lport = rdata->local_port;
+	u32 fcp_parm;
+
+	fcp_parm = ntohl(rspp->spp_params);
+	rdata->ids.roles = FC_RPORT_ROLE_UNKNOWN;
+	if (fcp_parm & FCP_SPPF_INIT_FCN)
+		rdata->ids.roles |= FC_RPORT_ROLE_FCP_INITIATOR;
+	if (fcp_parm & FCP_SPPF_TARG_FCN)
+		rdata->ids.roles |= FC_RPORT_ROLE_FCP_TARGET;
+	if (fcp_parm & FCP_SPPF_RETRY)
+		rdata->flags |= FC_RP_FLAGS_RETRY;
+	rdata->supported_classes = FC_COS_CLASS3;
+
+	if (!(lport->service_params & FC_RPORT_ROLE_FCP_INITIATOR))
+		return 0;
+
+	spp->spp_flags |= rspp->spp_flags & FC_SPP_EST_IMG_PAIR;
+
+	/*
+	 * OR in our service parameters with other providers (target), if any.
+	 */
+	fcp_parm = ntohl(spp->spp_params);
+	spp->spp_params = htonl(fcp_parm | lport->service_params);
+	return FC_SPP_RESP_ACK;
+}
+
+/*
+ * FC-4 provider ops for FCP initiator.
+ */
+struct fc4_prov fc_rport_fcp_init = {
+	.prli = fc_rport_fcp_prli,
+};
+
+/**
+ * fc_rport_t0_prli() - Handle incoming PRLI parameters for type 0
+ * @rdata: remote port private
+ * @spp_len: service parameter page length
+ * @rspp: received service parameter page
+ * @spp: response service parameter page
+ */
+static int fc_rport_t0_prli(struct fc_rport_priv *rdata, u32 spp_len,
+			    const struct fc_els_spp *rspp,
+			    struct fc_els_spp *spp)
+{
+	if (rspp->spp_flags & FC_SPP_EST_IMG_PAIR)
+		return FC_SPP_RESP_INVL;
+	return FC_SPP_RESP_ACK;
+}
+
+/*
+ * FC-4 provider ops for type 0 service parameters.
+ *
+ * This handles the special case of type 0 which is always successful
+ * but doesn't do anything otherwise.
+ */
+struct fc4_prov fc_rport_t0_prov = {
+	.prli = fc_rport_t0_prli,
+};
+
+/**
  * fc_setup_rport() - Initialize the rport_event_queue
  */
-int fc_setup_rport()
+int fc_setup_rport(void)
 {
 	rport_event_queue = create_singlethread_workqueue("fc_rport_eq");
 	if (!rport_event_queue)
@@ -1900,7 +2018,7 @@ int fc_setup_rport()
 /**
  * fc_destroy_rport() - Destroy the rport_event_queue
  */
-void fc_destroy_rport()
+void fc_destroy_rport(void)
 {
 	destroy_workqueue(rport_event_queue);
 }
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index da8b61543ee4..0c550d5b9133 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -3352,6 +3352,47 @@ int iscsi_session_get_param(struct iscsi_cls_session *cls_session,
 }
 EXPORT_SYMBOL_GPL(iscsi_session_get_param);
 
+int iscsi_conn_get_addr_param(struct sockaddr_storage *addr,
+			      enum iscsi_param param, char *buf)
+{
+	struct sockaddr_in6 *sin6 = NULL;
+	struct sockaddr_in *sin = NULL;
+	int len;
+
+	switch (addr->ss_family) {
+	case AF_INET:
+		sin = (struct sockaddr_in *)addr;
+		break;
+	case AF_INET6:
+		sin6 = (struct sockaddr_in6 *)addr;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	switch (param) {
+	case ISCSI_PARAM_CONN_ADDRESS:
+	case ISCSI_HOST_PARAM_IPADDRESS:
+		if (sin)
+			len = sprintf(buf, "%pI4\n", &sin->sin_addr.s_addr);
+		else
+			len = sprintf(buf, "%pI6\n", &sin6->sin6_addr);
+		break;
+	case ISCSI_PARAM_CONN_PORT:
+		if (sin)
+			len = sprintf(buf, "%hu\n", be16_to_cpu(sin->sin_port));
+		else
+			len = sprintf(buf, "%hu\n",
+				      be16_to_cpu(sin6->sin6_port));
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return len;
+}
+EXPORT_SYMBOL_GPL(iscsi_conn_get_addr_param);
+
 int iscsi_conn_get_param(struct iscsi_cls_conn *cls_conn,
 			 enum iscsi_param param, char *buf)
 {
@@ -3416,9 +3457,6 @@ int iscsi_host_get_param(struct Scsi_Host *shost, enum iscsi_host_param param,
 	case ISCSI_HOST_PARAM_INITIATOR_NAME:
 		len = sprintf(buf, "%s\n", ihost->initiatorname);
 		break;
-	case ISCSI_HOST_PARAM_IPADDRESS:
-		len = sprintf(buf, "%s\n", ihost->local_address);
-		break;
 	default:
 		return -ENOSYS;
 	}
diff --git a/drivers/scsi/libsas/Kconfig b/drivers/scsi/libsas/Kconfig
index 18f33cd54411..9dafe64e7c7a 100644
--- a/drivers/scsi/libsas/Kconfig
+++ b/drivers/scsi/libsas/Kconfig
@@ -46,11 +46,3 @@ config SCSI_SAS_HOST_SMP
 		Allows sas hosts to receive SMP frames.  Selecting this
 		option builds an SMP interpreter into libsas.  Say
 		N here if you want to save the few kb this consumes.
-
-config SCSI_SAS_LIBSAS_DEBUG
-	bool "Compile the SAS Domain Transport Attributes in debug mode"
-	default y
-	depends on SCSI_SAS_LIBSAS
-	help
-		Compiles the SAS Layer in debug mode.  In debug mode, the
-		SAS Layer prints diagnostic and debug messages.
diff --git a/drivers/scsi/libsas/Makefile b/drivers/scsi/libsas/Makefile
index 1ad1323c60fa..566a10024598 100644
--- a/drivers/scsi/libsas/Makefile
+++ b/drivers/scsi/libsas/Makefile
@@ -21,10 +21,6 @@
 # Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307
 # USA
 
-ifeq ($(CONFIG_SCSI_SAS_LIBSAS_DEBUG),y)
-	EXTRA_CFLAGS += -DSAS_DEBUG
-endif
-
 obj-$(CONFIG_SCSI_SAS_LIBSAS) += libsas.o
 libsas-y +=  sas_init.o     \
 		sas_phy.o      \
diff --git a/drivers/scsi/libsas/sas_ata.c b/drivers/scsi/libsas/sas_ata.c
index 4d3b704ede1c..d2b2d1474c28 100644
--- a/drivers/scsi/libsas/sas_ata.c
+++ b/drivers/scsi/libsas/sas_ata.c
@@ -71,13 +71,13 @@ static enum ata_completion_errors sas_to_ata_err(struct task_status_struct *ts)
 		case SAS_SG_ERR:
 			return AC_ERR_INVALID;
 
-		case SAM_STAT_CHECK_CONDITION:
 		case SAS_OPEN_TO:
 		case SAS_OPEN_REJECT:
 			SAS_DPRINTK("%s: Saw error %d.  What to do?\n",
 				    __func__, ts->stat);
 			return AC_ERR_OTHER;
 
+		case SAM_STAT_CHECK_CONDITION:
 		case SAS_ABORTED_TASK:
 			return AC_ERR_DEV;
 
@@ -107,13 +107,15 @@ static void sas_ata_task_done(struct sas_task *task)
 	sas_ha = dev->port->ha;
 
 	spin_lock_irqsave(dev->sata_dev.ap->lock, flags);
-	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD) {
+	if (stat->stat == SAS_PROTO_RESPONSE || stat->stat == SAM_STAT_GOOD ||
+	    ((stat->stat == SAM_STAT_CHECK_CONDITION &&
+	      dev->sata_dev.command_set == ATAPI_COMMAND_SET))) {
 		ata_tf_from_fis(resp->ending_fis, &dev->sata_dev.tf);
 		qc->err_mask |= ac_err_mask(dev->sata_dev.tf.command);
 		dev->sata_dev.sstatus = resp->sstatus;
 		dev->sata_dev.serror = resp->serror;
 		dev->sata_dev.scontrol = resp->scontrol;
-	} else if (stat->stat != SAM_STAT_GOOD) {
+	} else {
 		ac = sas_to_ata_err(stat);
 		if (ac) {
 			SAS_DPRINTK("%s: SAS error %x\n", __func__,
@@ -305,55 +307,6 @@ static void sas_ata_post_internal(struct ata_queued_cmd *qc)
 	}
 }
 
-static int sas_ata_scr_write(struct ata_link *link, unsigned int sc_reg_in,
-			      u32 val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			dev->sata_dev.sstatus = val;
-			break;
-		case SCR_CONTROL:
-			dev->sata_dev.scontrol = val;
-			break;
-		case SCR_ERROR:
-			dev->sata_dev.serror = val;
-			break;
-		case SCR_ACTIVE:
-			dev->sata_dev.ap->link.sactive = val;
-			break;
-		default:
-			return -EINVAL;
-	}
-	return 0;
-}
-
-static int sas_ata_scr_read(struct ata_link *link, unsigned int sc_reg_in,
-			    u32 *val)
-{
-	struct domain_device *dev = link->ap->private_data;
-
-	SAS_DPRINTK("STUB %s\n", __func__);
-	switch (sc_reg_in) {
-		case SCR_STATUS:
-			*val = dev->sata_dev.sstatus;
-			return 0;
-		case SCR_CONTROL:
-			*val = dev->sata_dev.scontrol;
-			return 0;
-		case SCR_ERROR:
-			*val = dev->sata_dev.serror;
-			return 0;
-		case SCR_ACTIVE:
-			*val = dev->sata_dev.ap->link.sactive;
-			return 0;
-		default:
-			return -EINVAL;
-	}
-}
-
 static struct ata_port_operations sas_sata_ops = {
 	.prereset		= ata_std_prereset,
 	.softreset		= NULL,
@@ -367,8 +320,6 @@ static struct ata_port_operations sas_sata_ops = {
 	.qc_fill_rtf		= sas_ata_qc_fill_rtf,
 	.port_start		= ata_sas_port_start,
 	.port_stop		= ata_sas_port_stop,
-	.scr_read		= sas_ata_scr_read,
-	.scr_write		= sas_ata_scr_write
 };
 
 static struct ata_port_info sata_port_info = {
@@ -801,7 +752,7 @@ void sas_ata_strategy_handler(struct Scsi_Host *shost)
 
 		if (!dev_is_sata(ddev))
 			continue;
-		
+
 		ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata port error handler");
 		ata_scsi_port_error_handler(shost, ap);
 	}
@@ -834,13 +785,13 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
 		LIST_HEAD(sata_q);
 
 		ap = NULL;
-		
+
 		list_for_each_entry_safe(cmd, n, work_q, eh_entry) {
 			struct domain_device *ddev = cmd_to_domain_dev(cmd);
 
 			if (!dev_is_sata(ddev) || TO_SAS_TASK(cmd))
 				continue;
-			if(ap && ap != ddev->sata_dev.ap)
+			if (ap && ap != ddev->sata_dev.ap)
 				continue;
 			ap = ddev->sata_dev.ap;
 			rtn = 1;
@@ -848,7 +799,7 @@ int sas_ata_eh(struct Scsi_Host *shost, struct list_head *work_q,
 		}
 
 		if (!list_empty(&sata_q)) {
-			ata_port_printk(ap, KERN_DEBUG,"sas eh calling libata cmd error handler\n");
+			ata_port_printk(ap, KERN_DEBUG, "sas eh calling libata cmd error handler\n");
 			ata_scsi_cmd_error_handler(shost, ap, &sata_q);
 		}
 	} while (ap);
diff --git a/drivers/scsi/libsas/sas_dump.c b/drivers/scsi/libsas/sas_dump.c
index c17c25030f1c..fc460933575c 100644
--- a/drivers/scsi/libsas/sas_dump.c
+++ b/drivers/scsi/libsas/sas_dump.c
@@ -24,8 +24,6 @@
 
 #include "sas_dump.h"
 
-#ifdef SAS_DEBUG
-
 static const char *sas_hae_str[] = {
 	[0] = "HAE_RESET",
 };
@@ -72,5 +70,3 @@ void sas_dump_port(struct asd_sas_port *port)
 	SAS_DPRINTK("port%d: oob_mode:0x%x\n", port->id, port->oob_mode);
 	SAS_DPRINTK("port%d: num_phys:%d\n", port->id, port->num_phys);
 }
-
-#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_dump.h b/drivers/scsi/libsas/sas_dump.h
index 47b45d4f5258..800e4c69093f 100644
--- a/drivers/scsi/libsas/sas_dump.h
+++ b/drivers/scsi/libsas/sas_dump.h
@@ -24,19 +24,7 @@
 
 #include "sas_internal.h"
 
-#ifdef SAS_DEBUG
-
 void sas_dprint_porte(int phyid, enum port_event pe);
 void sas_dprint_phye(int phyid, enum phy_event pe);
 void sas_dprint_hae(struct sas_ha_struct *sas_ha, enum ha_event he);
 void sas_dump_port(struct asd_sas_port *port);
-
-#else /* SAS_DEBUG */
-
-static inline void sas_dprint_porte(int phyid, enum port_event pe) { }
-static inline void sas_dprint_phye(int phyid, enum phy_event pe) { }
-static inline void sas_dprint_hae(struct sas_ha_struct *sas_ha,
-				  enum ha_event he) { }
-static inline void sas_dump_port(struct asd_sas_port *port) { }
-
-#endif /* SAS_DEBUG */
diff --git a/drivers/scsi/libsas/sas_expander.c b/drivers/scsi/libsas/sas_expander.c
index 505ffe358293..f3f693b772ac 100644
--- a/drivers/scsi/libsas/sas_expander.c
+++ b/drivers/scsi/libsas/sas_expander.c
@@ -244,6 +244,11 @@ static int sas_ex_phy_discover_helper(struct domain_device *dev, u8 *disc_req,
 		 * dev to host FIS as described in section G.5 of
 		 * sas-2 r 04b */
 		dr = &((struct smp_resp *)disc_resp)->disc;
+		if (memcmp(dev->sas_addr, dr->attached_sas_addr,
+			  SAS_ADDR_SIZE) == 0) {
+			sas_printk("Found loopback topology, just ignore it!\n");
+			return 0;
+		}
 		if (!(dr->attached_dev_type == 0 &&
 		      dr->attached_sata_dev))
 			break;
diff --git a/drivers/scsi/libsas/sas_internal.h b/drivers/scsi/libsas/sas_internal.h
index 0001374bd6b2..8b538bd1ff2b 100644
--- a/drivers/scsi/libsas/sas_internal.h
+++ b/drivers/scsi/libsas/sas_internal.h
@@ -33,11 +33,7 @@
 
 #define sas_printk(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
 
-#ifdef SAS_DEBUG
-#define SAS_DPRINTK(fmt, ...) printk(KERN_NOTICE "sas: " fmt, ## __VA_ARGS__)
-#else
-#define SAS_DPRINTK(fmt, ...)
-#endif
+#define SAS_DPRINTK(fmt, ...) printk(KERN_DEBUG "sas: " fmt, ## __VA_ARGS__)
 
 #define TO_SAS_TASK(_scsi_cmd)  ((void *)(_scsi_cmd)->host_scribble)
 #define ASSIGN_SAS_TASK(_sc, _t) do { (_sc)->host_scribble = (void *) _t; } while (0)
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index 67758ea8eb7f..bece759c51ec 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -681,11 +681,11 @@ enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
 {
 	struct sas_task *task = TO_SAS_TASK(cmd);
 	unsigned long flags;
-	enum blk_eh_timer_return rtn; 
+	enum blk_eh_timer_return rtn;
 
 	if (sas_ata_timed_out(cmd, task, &rtn))
 		return rtn;
-	
+
 
 	if (!task) {
 		cmd->request->timeout /= 2;
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index 746dd3d7a092..b64c6da870d3 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2010 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -325,6 +325,7 @@ struct lpfc_vport {
 #define FC_VPORT_CVL_RCVD	0x400000 /* VLink failed due to CVL	 */
 #define FC_VFI_REGISTERED	0x800000 /* VFI is registered */
 #define FC_FDISC_COMPLETED	0x1000000/* FDISC completed */
+#define FC_DISC_DELAYED		0x2000000/* Delay NPort discovery */
 
 	uint32_t ct_flags;
 #define FC_CT_RFF_ID		0x1	 /* RFF_ID accepted by switch */
@@ -348,6 +349,8 @@ struct lpfc_vport {
 
 	uint32_t fc_myDID;	/* fibre channel S_ID */
 	uint32_t fc_prevDID;	/* previous fibre channel S_ID */
+	struct lpfc_name fabric_portname;
+	struct lpfc_name fabric_nodename;
 
 	int32_t stopped;   /* HBA has not been restarted since last ERATT */
 	uint8_t fc_linkspeed;	/* Link speed after last READ_LA */
@@ -372,6 +375,7 @@ struct lpfc_vport {
 #define WORKER_DISC_TMO                0x1	/* vport: Discovery timeout */
 #define WORKER_ELS_TMO                 0x2	/* vport: ELS timeout */
 #define WORKER_FDMI_TMO                0x4	/* vport: FDMI timeout */
+#define WORKER_DELAYED_DISC_TMO        0x8	/* vport: delayed discovery */
 
 #define WORKER_MBOX_TMO                0x100	/* hba: MBOX timeout */
 #define WORKER_HB_TMO                  0x200	/* hba: Heart beat timeout */
@@ -382,6 +386,7 @@ struct lpfc_vport {
 
 	struct timer_list fc_fdmitmo;
 	struct timer_list els_tmofunc;
+	struct timer_list delayed_disc_tmo;
 
 	int unreg_vpi_cmpl;
 
@@ -548,6 +553,8 @@ struct lpfc_hba {
 #define LPFC_SLI3_CRP_ENABLED		0x08
 #define LPFC_SLI3_BG_ENABLED		0x20
 #define LPFC_SLI3_DSS_ENABLED		0x40
+#define LPFC_SLI4_PERFH_ENABLED		0x80
+#define LPFC_SLI4_PHWQ_ENABLED		0x100
 	uint32_t iocb_cmd_size;
 	uint32_t iocb_rsp_size;
 
@@ -655,7 +662,7 @@ struct lpfc_hba {
 #define LPFC_INITIALIZE_LINK              0	/* do normal init_link mbox */
 #define LPFC_DELAY_INIT_LINK              1	/* layered driver hold off */
 #define LPFC_DELAY_INIT_LINK_INDEFINITELY 2	/* wait, manual intervention */
-
+	uint32_t cfg_enable_dss;
 	lpfc_vpd_t vpd;		/* vital product data */
 
 	struct pci_dev *pcidev;
@@ -792,6 +799,10 @@ struct lpfc_hba {
 	struct dentry *debug_slow_ring_trc;
 	struct lpfc_debugfs_trc *slow_ring_trc;
 	atomic_t slow_ring_trc_cnt;
+	/* iDiag debugfs sub-directory */
+	struct dentry *idiag_root;
+	struct dentry *idiag_pci_cfg;
+	struct dentry *idiag_que_info;
 #endif
 
 	/* Used for deferred freeing of ELS data buffers */
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 3512abb8a587..e7c020df12fa 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -623,10 +623,14 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
 	int status = 0;
 	int cnt = 0;
 	int i;
+	int rc;
 
 	init_completion(&online_compl);
-	lpfc_workq_post_event(phba, &status, &online_compl,
+	rc = lpfc_workq_post_event(phba, &status, &online_compl,
 			      LPFC_EVT_OFFLINE_PREP);
+	if (rc == 0)
+		return -ENOMEM;
+
 	wait_for_completion(&online_compl);
 
 	if (status != 0)
@@ -652,7 +656,10 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
 	}
 
 	init_completion(&online_compl);
-	lpfc_workq_post_event(phba, &status, &online_compl, type);
+	rc = lpfc_workq_post_event(phba, &status, &online_compl, type);
+	if (rc == 0)
+		return -ENOMEM;
+
 	wait_for_completion(&online_compl);
 
 	if (status != 0)
@@ -671,6 +678,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
  *
  * Notes:
  * Assumes any error from lpfc_do_offline() will be negative.
+ * Do not make this function static.
  *
  * Returns:
  * lpfc_do_offline() return code if not zero
@@ -682,6 +690,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
 {
 	struct completion online_compl;
 	int status = 0;
+	int rc;
 
 	if (!phba->cfg_enable_hba_reset)
 		return -EIO;
@@ -692,8 +701,11 @@ lpfc_selective_reset(struct lpfc_hba *phba)
 		return status;
 
 	init_completion(&online_compl);
-	lpfc_workq_post_event(phba, &status, &online_compl,
+	rc = lpfc_workq_post_event(phba, &status, &online_compl,
 			      LPFC_EVT_ONLINE);
+	if (rc == 0)
+		return -ENOMEM;
+
 	wait_for_completion(&online_compl);
 
 	if (status != 0)
@@ -812,14 +824,17 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
 	struct lpfc_hba   *phba = vport->phba;
 	struct completion online_compl;
 	int status=0;
+	int rc;
 
 	if (!phba->cfg_enable_hba_reset)
 		return -EACCES;
 	init_completion(&online_compl);
 
 	if(strncmp(buf, "online", sizeof("online") - 1) == 0) {
-		lpfc_workq_post_event(phba, &status, &online_compl,
+		rc = lpfc_workq_post_event(phba, &status, &online_compl,
 				      LPFC_EVT_ONLINE);
+		if (rc == 0)
+			return -ENOMEM;
 		wait_for_completion(&online_compl);
 	} else if (strncmp(buf, "offline", sizeof("offline") - 1) == 0)
 		status = lpfc_do_offline(phba, LPFC_EVT_OFFLINE);
@@ -1279,6 +1294,28 @@ lpfc_fips_rev_show(struct device *dev,  struct device_attribute *attr,
 }
 
 /**
+ * lpfc_dss_show - Return the current state of dss and the configured state
+ * @dev: class converted to a Scsi_host structure.
+ * @attr: device attribute, not used.
+ * @buf: on return contains the formatted text.
+ *
+ * Returns: size of formatted string.
+ **/
+static ssize_t
+lpfc_dss_show(struct device *dev, struct device_attribute *attr,
+	      char *buf)
+{
+	struct Scsi_Host *shost = class_to_shost(dev);
+	struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+	struct lpfc_hba   *phba = vport->phba;
+
+	return snprintf(buf, PAGE_SIZE, "%s - %sOperational\n",
+			(phba->cfg_enable_dss) ? "Enabled" : "Disabled",
+			(phba->sli3_options & LPFC_SLI3_DSS_ENABLED) ?
+				"" : "Not ");
+}
+
+/**
  * lpfc_param_show - Return a cfg attribute value in decimal
  *
  * Description:
@@ -1597,13 +1634,13 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
 
 #define LPFC_ATTR(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_param_init(name, defval, minval, maxval)
 
 #define LPFC_ATTR_R(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_param_show(name)\
 lpfc_param_init(name, defval, minval, maxval)\
@@ -1611,7 +1648,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
 
 #define LPFC_ATTR_RW(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_param_show(name)\
 lpfc_param_init(name, defval, minval, maxval)\
@@ -1622,7 +1659,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
 
 #define LPFC_ATTR_HEX_R(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_param_hex_show(name)\
 lpfc_param_init(name, defval, minval, maxval)\
@@ -1630,7 +1667,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
 
 #define LPFC_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_param_hex_show(name)\
 lpfc_param_init(name, defval, minval, maxval)\
@@ -1641,13 +1678,13 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
 
 #define LPFC_VPORT_ATTR(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_vport_param_init(name, defval, minval, maxval)
 
 #define LPFC_VPORT_ATTR_R(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_vport_param_show(name)\
 lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1655,7 +1692,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
 
 #define LPFC_VPORT_ATTR_RW(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_vport_param_show(name)\
 lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1666,7 +1703,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO | S_IWUSR,\
 
 #define LPFC_VPORT_ATTR_HEX_R(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_vport_param_hex_show(name)\
 lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1674,7 +1711,7 @@ static DEVICE_ATTR(lpfc_##name, S_IRUGO , lpfc_##name##_show, NULL)
 
 #define LPFC_VPORT_ATTR_HEX_RW(name, defval, minval, maxval, desc) \
 static uint lpfc_##name = defval;\
-module_param(lpfc_##name, uint, 0);\
+module_param(lpfc_##name, uint, S_IRUGO);\
 MODULE_PARM_DESC(lpfc_##name, desc);\
 lpfc_vport_param_hex_show(name)\
 lpfc_vport_param_init(name, defval, minval, maxval)\
@@ -1718,7 +1755,7 @@ static DEVICE_ATTR(npiv_info, S_IRUGO, lpfc_npiv_info_show, NULL);
 static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
 static DEVICE_ATTR(lpfc_fips_level, S_IRUGO, lpfc_fips_level_show, NULL);
 static DEVICE_ATTR(lpfc_fips_rev, S_IRUGO, lpfc_fips_rev_show, NULL);
-
+static DEVICE_ATTR(lpfc_dss, S_IRUGO, lpfc_dss_show, NULL);
 
 static char *lpfc_soft_wwn_key = "C99G71SL8032A";
 
@@ -1813,6 +1850,7 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr,
 	int stat1=0, stat2=0;
 	unsigned int i, j, cnt=count;
 	u8 wwpn[8];
+	int rc;
 
 	if (!phba->cfg_enable_hba_reset)
 		return -EACCES;
@@ -1863,7 +1901,11 @@ lpfc_soft_wwpn_store(struct device *dev, struct device_attribute *attr,
 				"0463 lpfc_soft_wwpn attribute set failed to "
 				"reinit adapter - %d\n", stat1);
 	init_completion(&online_compl);
-	lpfc_workq_post_event(phba, &stat2, &online_compl, LPFC_EVT_ONLINE);
+	rc = lpfc_workq_post_event(phba, &stat2, &online_compl,
+				   LPFC_EVT_ONLINE);
+	if (rc == 0)
+		return -ENOMEM;
+
 	wait_for_completion(&online_compl);
 	if (stat2)
 		lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -1954,7 +1996,7 @@ static DEVICE_ATTR(lpfc_soft_wwnn, S_IRUGO | S_IWUSR,\
 
 
 static int lpfc_poll = 0;
-module_param(lpfc_poll, int, 0);
+module_param(lpfc_poll, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_poll, "FCP ring polling mode control:"
 		 " 0 - none,"
 		 " 1 - poll with interrupts enabled"
@@ -1964,21 +2006,21 @@ static DEVICE_ATTR(lpfc_poll, S_IRUGO | S_IWUSR,
 		   lpfc_poll_show, lpfc_poll_store);
 
 int  lpfc_sli_mode = 0;
-module_param(lpfc_sli_mode, int, 0);
+module_param(lpfc_sli_mode, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_sli_mode, "SLI mode selector:"
 		 " 0 - auto (SLI-3 if supported),"
 		 " 2 - select SLI-2 even on SLI-3 capable HBAs,"
 		 " 3 - select SLI-3");
 
 int lpfc_enable_npiv = 1;
-module_param(lpfc_enable_npiv, int, 0);
+module_param(lpfc_enable_npiv, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_enable_npiv, "Enable NPIV functionality");
 lpfc_param_show(enable_npiv);
 lpfc_param_init(enable_npiv, 1, 0, 1);
 static DEVICE_ATTR(lpfc_enable_npiv, S_IRUGO, lpfc_enable_npiv_show, NULL);
 
 int lpfc_enable_rrq;
-module_param(lpfc_enable_rrq, int, 0);
+module_param(lpfc_enable_rrq, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_enable_rrq, "Enable RRQ functionality");
 lpfc_param_show(enable_rrq);
 lpfc_param_init(enable_rrq, 0, 0, 1);
@@ -2040,7 +2082,7 @@ static DEVICE_ATTR(txcmplq_hw, S_IRUGO,
 			 lpfc_txcmplq_hw_show, NULL);
 
 int lpfc_iocb_cnt = 2;
-module_param(lpfc_iocb_cnt, int, 1);
+module_param(lpfc_iocb_cnt, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_iocb_cnt,
 	"Number of IOCBs alloc for ELS, CT, and ABTS: 1k to 5k IOCBs");
 lpfc_param_show(iocb_cnt);
@@ -2192,7 +2234,7 @@ static DEVICE_ATTR(lpfc_nodev_tmo, S_IRUGO | S_IWUSR,
 # disappear until the timer expires. Value range is [0,255]. Default
 # value is 30.
 */
-module_param(lpfc_devloss_tmo, int, 0);
+module_param(lpfc_devloss_tmo, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_devloss_tmo,
 		 "Seconds driver will hold I/O waiting "
 		 "for a device to come back");
@@ -2302,7 +2344,7 @@ LPFC_VPORT_ATTR_R(peer_port_login, 0, 0, 1,
 # Default value of this parameter is 1.
 */
 static int lpfc_restrict_login = 1;
-module_param(lpfc_restrict_login, int, 0);
+module_param(lpfc_restrict_login, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_restrict_login,
 		 "Restrict virtual ports login to remote initiators.");
 lpfc_vport_param_show(restrict_login);
@@ -2473,7 +2515,7 @@ lpfc_topology_store(struct device *dev, struct device_attribute *attr,
 	return -EINVAL;
 }
 static int lpfc_topology = 0;
-module_param(lpfc_topology, int, 0);
+module_param(lpfc_topology, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
 lpfc_param_show(topology)
 lpfc_param_init(topology, 0, 0, 6)
@@ -2915,7 +2957,7 @@ lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
 }
 
 static int lpfc_link_speed = 0;
-module_param(lpfc_link_speed, int, 0);
+module_param(lpfc_link_speed, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
 lpfc_param_show(link_speed)
 
@@ -3043,7 +3085,7 @@ lpfc_aer_support_store(struct device *dev, struct device_attribute *attr,
 }
 
 static int lpfc_aer_support = 1;
-module_param(lpfc_aer_support, int, 1);
+module_param(lpfc_aer_support, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_aer_support, "Enable PCIe device AER support");
 lpfc_param_show(aer_support)
 
@@ -3155,7 +3197,7 @@ LPFC_VPORT_ATTR_RW(use_adisc, 0, 0, 1,
 # The value is set in milliseconds.
 */
 static int lpfc_max_scsicmpl_time;
-module_param(lpfc_max_scsicmpl_time, int, 0);
+module_param(lpfc_max_scsicmpl_time, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_max_scsicmpl_time,
 	"Use command completion time to control queue depth");
 lpfc_vport_param_show(max_scsicmpl_time);
@@ -3331,7 +3373,7 @@ LPFC_ATTR_R(enable_bg, 0, 0, 1, "Enable BlockGuard Support");
 */
 unsigned int lpfc_prot_mask = SHOST_DIF_TYPE1_PROTECTION;
 
-module_param(lpfc_prot_mask, uint, 0);
+module_param(lpfc_prot_mask, uint, S_IRUGO);
 MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
 
 /*
@@ -3343,9 +3385,28 @@ MODULE_PARM_DESC(lpfc_prot_mask, "host protection mask");
 #
 */
 unsigned char lpfc_prot_guard = SHOST_DIX_GUARD_IP;
-module_param(lpfc_prot_guard, byte, 0);
+module_param(lpfc_prot_guard, byte, S_IRUGO);
 MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
 
+/*
+ * Delay initial NPort discovery when Clean Address bit is cleared in
+ * FLOGI/FDISC accept and FCID/Fabric name/Fabric portname is changed.
+ * This parameter can have value 0 or 1.
+ * When this parameter is set to 0, no delay is added to the initial
+ * discovery.
+ * When this parameter is set to non-zero value, initial Nport discovery is
+ * delayed by ra_tov seconds when Clean Address bit is cleared in FLOGI/FDISC
+ * accept and FCID/Fabric name/Fabric portname is changed.
+ * Driver always delay Nport discovery for subsequent FLOGI/FDISC completion
+ * when Clean Address bit is cleared in FLOGI/FDISC
+ * accept and FCID/Fabric name/Fabric portname is changed.
+ * Default value is 0.
+ */
+int lpfc_delay_discovery;
+module_param(lpfc_delay_discovery, int, S_IRUGO);
+MODULE_PARM_DESC(lpfc_delay_discovery,
+	"Delay NPort discovery when Clean Address bit is cleared. "
+	"Allowed values: 0,1.");
 
 /*
  * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
@@ -3437,6 +3498,7 @@ struct device_attribute *lpfc_hba_attrs[] = {
 	&dev_attr_txcmplq_hw,
 	&dev_attr_lpfc_fips_level,
 	&dev_attr_lpfc_fips_rev,
+	&dev_attr_lpfc_dss,
 	NULL,
 };
 
@@ -4639,6 +4701,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
 	lpfc_aer_support_init(phba, lpfc_aer_support);
 	lpfc_suppress_link_up_init(phba, lpfc_suppress_link_up);
 	lpfc_iocb_cnt_init(phba, lpfc_iocb_cnt);
+	phba->cfg_enable_dss = 1;
 	return;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 17fde522c84a..3d40023f4804 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -53,9 +53,9 @@ void lpfc_unreg_vpi(struct lpfc_hba *, uint16_t, LPFC_MBOXQ_t *);
 void lpfc_init_link(struct lpfc_hba *, LPFC_MBOXQ_t *, uint32_t, uint32_t);
 void lpfc_request_features(struct lpfc_hba *, struct lpfcMboxq *);
 void lpfc_supported_pages(struct lpfcMboxq *);
-void lpfc_sli4_params(struct lpfcMboxq *);
+void lpfc_pc_sli4_params(struct lpfcMboxq *);
 int lpfc_pc_sli4_params_get(struct lpfc_hba *, LPFC_MBOXQ_t *);
-
+int lpfc_get_sli4_parameters(struct lpfc_hba *, LPFC_MBOXQ_t *);
 struct lpfc_vport *lpfc_find_vport_by_did(struct lpfc_hba *, uint32_t);
 void lpfc_cleanup_rcv_buffers(struct lpfc_vport *);
 void lpfc_rcv_seq_check_edtov(struct lpfc_vport *);
@@ -167,6 +167,8 @@ int lpfc_ns_cmd(struct lpfc_vport *, int, uint8_t, uint32_t);
 int lpfc_fdmi_cmd(struct lpfc_vport *, struct lpfc_nodelist *, int);
 void lpfc_fdmi_tmo(unsigned long);
 void lpfc_fdmi_timeout_handler(struct lpfc_vport *);
+void lpfc_delayed_disc_tmo(unsigned long);
+void lpfc_delayed_disc_timeout_handler(struct lpfc_vport *);
 
 int lpfc_config_port_prep(struct lpfc_hba *);
 int lpfc_config_port_post(struct lpfc_hba *);
@@ -341,6 +343,7 @@ extern struct fc_function_template lpfc_transport_functions;
 extern struct fc_function_template lpfc_vport_transport_functions;
 extern int lpfc_sli_mode;
 extern int lpfc_enable_npiv;
+extern int lpfc_delay_discovery;
 
 int  lpfc_vport_symbolic_node_name(struct lpfc_vport *, char *, size_t);
 int  lpfc_vport_symbolic_port_name(struct lpfc_vport *, char *,	size_t);
@@ -423,6 +426,6 @@ int lpfc_send_rrq(struct lpfc_hba *, struct lpfc_node_rrq *);
 int lpfc_set_rrq_active(struct lpfc_hba *, struct lpfc_nodelist *,
 	uint16_t, uint16_t, uint16_t);
 void lpfc_cleanup_wt_rrqs(struct lpfc_hba *);
-void lpfc_cleanup_vports_rrqs(struct lpfc_vport *);
+void lpfc_cleanup_vports_rrqs(struct lpfc_vport *, struct lpfc_nodelist *);
 struct lpfc_node_rrq *lpfc_get_active_rrq(struct lpfc_vport *, uint16_t,
 	uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_ct.c b/drivers/scsi/lpfc/lpfc_ct.c
index c004fa9a681e..d9edfd90d7ff 100644
--- a/drivers/scsi/lpfc/lpfc_ct.c
+++ b/drivers/scsi/lpfc/lpfc_ct.c
@@ -1738,6 +1738,55 @@ fdmi_cmd_exit:
 	return 1;
 }
 
+/**
+ * lpfc_delayed_disc_tmo - Timeout handler for delayed discovery timer.
+ * @ptr - Context object of the timer.
+ *
+ * This function set the WORKER_DELAYED_DISC_TMO flag and wake up
+ * the worker thread.
+ **/
+void
+lpfc_delayed_disc_tmo(unsigned long ptr)
+{
+	struct lpfc_vport *vport = (struct lpfc_vport *)ptr;
+	struct lpfc_hba   *phba = vport->phba;
+	uint32_t tmo_posted;
+	unsigned long iflag;
+
+	spin_lock_irqsave(&vport->work_port_lock, iflag);
+	tmo_posted = vport->work_port_events & WORKER_DELAYED_DISC_TMO;
+	if (!tmo_posted)
+		vport->work_port_events |= WORKER_DELAYED_DISC_TMO;
+	spin_unlock_irqrestore(&vport->work_port_lock, iflag);
+
+	if (!tmo_posted)
+		lpfc_worker_wake_up(phba);
+	return;
+}
+
+/**
+ * lpfc_delayed_disc_timeout_handler - Function called by worker thread to
+ *      handle delayed discovery.
+ * @vport: pointer to a host virtual N_Port data structure.
+ *
+ * This function start nport discovery of the vport.
+ **/
+void
+lpfc_delayed_disc_timeout_handler(struct lpfc_vport *vport)
+{
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+	spin_lock_irq(shost->host_lock);
+	if (!(vport->fc_flag & FC_DISC_DELAYED)) {
+		spin_unlock_irq(shost->host_lock);
+		return;
+	}
+	vport->fc_flag &= ~FC_DISC_DELAYED;
+	spin_unlock_irq(shost->host_lock);
+
+	lpfc_do_scr_ns_plogi(vport->phba, vport);
+}
+
 void
 lpfc_fdmi_tmo(unsigned long ptr)
 {
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index a80d938fafc9..a753581509d6 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2007-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -57,8 +57,8 @@
  * # mount -t debugfs none /sys/kernel/debug
  *
  * The lpfc debugfs directory hierarchy is:
- * lpfc/lpfcX/vportY
- * where X is the lpfc hba unique_id
+ * /sys/kernel/debug/lpfc/fnX/vportY
+ * where X is the lpfc hba function unique_id
  * where Y is the vport VPI on that hba
  *
  * Debugging services available per vport:
@@ -82,52 +82,34 @@
  *                               the HBA. X MUST also be a power of 2.
  */
 static int lpfc_debugfs_enable = 1;
-module_param(lpfc_debugfs_enable, int, 0);
+module_param(lpfc_debugfs_enable, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_enable, "Enable debugfs services");
 
 /* This MUST be a power of 2 */
 static int lpfc_debugfs_max_disc_trc;
-module_param(lpfc_debugfs_max_disc_trc, int, 0);
+module_param(lpfc_debugfs_max_disc_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_max_disc_trc,
 	"Set debugfs discovery trace depth");
 
 /* This MUST be a power of 2 */
 static int lpfc_debugfs_max_slow_ring_trc;
-module_param(lpfc_debugfs_max_slow_ring_trc, int, 0);
+module_param(lpfc_debugfs_max_slow_ring_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
 	"Set debugfs slow ring trace depth");
 
 static int lpfc_debugfs_mask_disc_trc;
-module_param(lpfc_debugfs_mask_disc_trc, int, 0);
+module_param(lpfc_debugfs_mask_disc_trc, int, S_IRUGO);
 MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
 	"Set debugfs discovery trace mask");
 
 #include <linux/debugfs.h>
 
-/* size of output line, for discovery_trace and slow_ring_trace */
-#define LPFC_DEBUG_TRC_ENTRY_SIZE 100
-
-/* nodelist output buffer size */
-#define LPFC_NODELIST_SIZE 8192
-#define LPFC_NODELIST_ENTRY_SIZE 120
-
-/* dumpHBASlim output buffer size */
-#define LPFC_DUMPHBASLIM_SIZE 4096
-
-/* dumpHostSlim output buffer size */
-#define LPFC_DUMPHOSTSLIM_SIZE 4096
-
-/* hbqinfo output buffer size */
-#define LPFC_HBQINFO_SIZE 8192
-
-struct lpfc_debug {
-	char *buffer;
-	int  len;
-};
-
 static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
 static unsigned long lpfc_debugfs_start_time = 0L;
 
+/* iDiag */
+static struct lpfc_idiag idiag;
+
 /**
  * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
  * @vport: The vport to gather the log info from.
@@ -996,8 +978,6 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf,
 	return nbytes;
 }
 
-
-
 /**
  * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
  * @inode: The inode pointer that contains a vport pointer.
@@ -1099,6 +1079,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf,
 		  size_t nbytes, loff_t *ppos)
 {
 	struct lpfc_debug *debug = file->private_data;
+
 	return simple_read_from_buffer(buf, nbytes, ppos, debug->buffer,
 				       debug->len);
 }
@@ -1137,6 +1118,776 @@ lpfc_debugfs_dumpDataDif_release(struct inode *inode, struct file *file)
 	return 0;
 }
 
+/*
+ * iDiag debugfs file access methods
+ */
+
+/*
+ * iDiag PCI config space register access methods:
+ *
+ * The PCI config space register accessees of read, write, read-modify-write
+ * for set bits, and read-modify-write for clear bits to SLI4 PCI functions
+ * are provided. In the proper SLI4 PCI function's debugfs iDiag directory,
+ *
+ *      /sys/kernel/debug/lpfc/fn<#>/iDiag
+ *
+ * the access is through the debugfs entry pciCfg:
+ *
+ * 1. For PCI config space register read access, there are two read methods:
+ *    A) read a single PCI config space register in the size of a byte
+ *    (8 bits), a word (16 bits), or a dword (32 bits); or B) browse through
+ *    the 4K extended PCI config space.
+ *
+ *    A) Read a single PCI config space register consists of two steps:
+ *
+ *    Step-1: Set up PCI config space register read command, the command
+ *    syntax is,
+ *
+ *        echo 1 <where> <count> > pciCfg
+ *
+ *    where, 1 is the iDiag command for PCI config space read, <where> is the
+ *    offset from the beginning of the device's PCI config space to read from,
+ *    and <count> is the size of PCI config space register data to read back,
+ *    it will be 1 for reading a byte (8 bits), 2 for reading a word (16 bits
+ *    or 2 bytes), or 4 for reading a dword (32 bits or 4 bytes).
+ *
+ *    Setp-2: Perform the debugfs read operation to execute the idiag command
+ *    set up in Step-1,
+ *
+ *        cat pciCfg
+ *
+ *    Examples:
+ *    To read PCI device's vendor-id and device-id from PCI config space,
+ *
+ *        echo 1 0 4 > pciCfg
+ *        cat pciCfg
+ *
+ *    To read PCI device's currnt command from config space,
+ *
+ *        echo 1 4 2 > pciCfg
+ *        cat pciCfg
+ *
+ *    B) Browse through the entire 4K extended PCI config space also consists
+ *    of two steps:
+ *
+ *    Step-1: Set up PCI config space register browsing command, the command
+ *    syntax is,
+ *
+ *        echo 1 0 4096 > pciCfg
+ *
+ *    where, 1 is the iDiag command for PCI config space read, 0 must be used
+ *    as the offset for PCI config space register browse, and 4096 must be
+ *    used as the count for PCI config space register browse.
+ *
+ *    Step-2: Repeately issue the debugfs read operation to browse through
+ *    the entire PCI config space registers:
+ *
+ *        cat pciCfg
+ *        cat pciCfg
+ *        cat pciCfg
+ *        ...
+ *
+ *    When browsing to the end of the 4K PCI config space, the browse method
+ *    shall wrap around to start reading from beginning again, and again...
+ *
+ * 2. For PCI config space register write access, it supports a single PCI
+ *    config space register write in the size of a byte (8 bits), a word
+ *    (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ *        echo 2 <where> <count> <value> > pciCfg
+ *
+ *    where, 2 is the iDiag command for PCI config space write, <where> is
+ *    the offset from the beginning of the device's PCI config space to write
+ *    into, <count> is the size of data to write into the PCI config space,
+ *    it will be 1 for writing a byte (8 bits), 2 for writing a word (16 bits
+ *    or 2 bytes), or 4 for writing a dword (32 bits or 4 bytes), and <value>
+ *    is the data to be written into the PCI config space register at the
+ *    offset.
+ *
+ *    Examples:
+ *    To disable PCI device's interrupt assertion,
+ *
+ *    1) Read in device's PCI config space register command field <cmd>:
+ *
+ *           echo 1 4 2 > pciCfg
+ *           cat pciCfg
+ *
+ *    2) Set bit 10 (Interrupt Disable bit) in the <cmd>:
+ *
+ *           <cmd> = <cmd> | (1 < 10)
+ *
+ *    3) Write the modified command back:
+ *
+ *           echo 2 4 2 <cmd> > pciCfg
+ *
+ * 3. For PCI config space register set bits access, it supports a single PCI
+ *    config space register set bits in the size of a byte (8 bits), a word
+ *    (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ *        echo 3 <where> <count> <bitmask> > pciCfg
+ *
+ *    where, 3 is the iDiag command for PCI config space set bits, <where> is
+ *    the offset from the beginning of the device's PCI config space to set
+ *    bits into, <count> is the size of the bitmask to set into the PCI config
+ *    space, it will be 1 for setting a byte (8 bits), 2 for setting a word
+ *    (16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4 bytes), and
+ *    <bitmask> is the bitmask, indicating the bits to be set into the PCI
+ *    config space register at the offset. The logic performed to the content
+ *    of the PCI config space register, regval, is,
+ *
+ *        regval |= <bitmask>
+ *
+ * 4. For PCI config space register clear bits access, it supports a single
+ *    PCI config space register clear bits in the size of a byte (8 bits),
+ *    a word (16 bits), or a dword (32 bits). The command syntax is,
+ *
+ *        echo 4 <where> <count> <bitmask> > pciCfg
+ *
+ *    where, 4 is the iDiag command for PCI config space clear bits, <where>
+ *    is the offset from the beginning of the device's PCI config space to
+ *    clear bits from, <count> is the size of the bitmask to set into the PCI
+ *    config space, it will be 1 for setting a byte (8 bits), 2 for setting
+ *    a word(16 bits or 2 bytes), or 4 for setting a dword (32 bits or 4
+ *    bytes), and <bitmask> is the bitmask, indicating the bits to be cleared
+ *    from the PCI config space register at the offset. the logic performed
+ *    to the content of the PCI config space register, regval, is,
+ *
+ *        regval &= ~<bitmask>
+ *
+ * Note, for all single register read, write, set bits, or clear bits access,
+ * the offset (<where>) must be aligned with the size of the data:
+ *
+ * For data size of byte (8 bits), the offset must be aligned to the byte
+ * boundary; for data size of word (16 bits), the offset must be aligned
+ * to the word boundary; while for data size of dword (32 bits), the offset
+ * must be aligned to the dword boundary. Otherwise, the interface will
+ * return the error:
+ *
+ *     "-bash: echo: write error: Invalid argument".
+ *
+ * For example:
+ *
+ *     echo 1 2 4 > pciCfg
+ *     -bash: echo: write error: Invalid argument
+ *
+ * Note also, all of the numbers in the command fields for all read, write,
+ * set bits, and clear bits PCI config space register command fields can be
+ * either decimal or hex.
+ *
+ * For example,
+ *     echo 1 0 4096 > pciCfg
+ *
+ * will be the same as
+ *     echo 1 0 0x1000 > pciCfg
+ *
+ * And,
+ *     echo 2 155 1 10 > pciCfg
+ *
+ * will be
+ *     echo 2 0x9b 1 0xa > pciCfg
+ */
+
+/**
+ * lpfc_idiag_cmd_get - Get and parse idiag debugfs comands from user space
+ * @buf: The pointer to the user space buffer.
+ * @nbytes: The number of bytes in the user space buffer.
+ * @idiag_cmd: pointer to the idiag command struct.
+ *
+ * This routine reads data from debugfs user space buffer and parses the
+ * buffer for getting the idiag command and arguments. The while space in
+ * between the set of data is used as the parsing separator.
+ *
+ * This routine returns 0 when successful, it returns proper error code
+ * back to the user space in error conditions.
+ */
+static int lpfc_idiag_cmd_get(const char __user *buf, size_t nbytes,
+			      struct lpfc_idiag_cmd *idiag_cmd)
+{
+	char mybuf[64];
+	char *pbuf, *step_str;
+	int bsize, i;
+
+	/* Protect copy from user */
+	if (!access_ok(VERIFY_READ, buf, nbytes))
+		return -EFAULT;
+
+	memset(mybuf, 0, sizeof(mybuf));
+	memset(idiag_cmd, 0, sizeof(*idiag_cmd));
+	bsize = min(nbytes, (sizeof(mybuf)-1));
+
+	if (copy_from_user(mybuf, buf, bsize))
+		return -EFAULT;
+	pbuf = &mybuf[0];
+	step_str = strsep(&pbuf, "\t ");
+
+	/* The opcode must present */
+	if (!step_str)
+		return -EINVAL;
+
+	idiag_cmd->opcode = simple_strtol(step_str, NULL, 0);
+	if (idiag_cmd->opcode == 0)
+		return -EINVAL;
+
+	for (i = 0; i < LPFC_IDIAG_CMD_DATA_SIZE; i++) {
+		step_str = strsep(&pbuf, "\t ");
+		if (!step_str)
+			return 0;
+		idiag_cmd->data[i] = simple_strtol(step_str, NULL, 0);
+	}
+	return 0;
+}
+
+/**
+ * lpfc_idiag_open - idiag open debugfs
+ * @inode: The inode pointer that contains a pointer to phba.
+ * @file: The file pointer to attach the file operation.
+ *
+ * Description:
+ * This routine is the entry point for the debugfs open file operation. It
+ * gets the reference to phba from the i_private field in @inode, it then
+ * allocates buffer for the file operation, performs the necessary PCI config
+ * space read into the allocated buffer according to the idiag user command
+ * setup, and then returns a pointer to buffer in the private_data field in
+ * @file.
+ *
+ * Returns:
+ * This function returns zero if successful. On error it will return an
+ * negative error value.
+ **/
+static int
+lpfc_idiag_open(struct inode *inode, struct file *file)
+{
+	struct lpfc_debug *debug;
+
+	debug = kmalloc(sizeof(*debug), GFP_KERNEL);
+	if (!debug)
+		return -ENOMEM;
+
+	debug->i_private = inode->i_private;
+	debug->buffer = NULL;
+	file->private_data = debug;
+
+	return 0;
+}
+
+/**
+ * lpfc_idiag_release - Release idiag access file operation
+ * @inode: The inode pointer that contains a vport pointer. (unused)
+ * @file: The file pointer that contains the buffer to release.
+ *
+ * Description:
+ * This routine is the generic release routine for the idiag access file
+ * operation, it frees the buffer that was allocated when the debugfs file
+ * was opened.
+ *
+ * Returns:
+ * This function returns zero.
+ **/
+static int
+lpfc_idiag_release(struct inode *inode, struct file *file)
+{
+	struct lpfc_debug *debug = file->private_data;
+
+	/* Free the buffers to the file operation */
+	kfree(debug->buffer);
+	kfree(debug);
+
+	return 0;
+}
+
+/**
+ * lpfc_idiag_cmd_release - Release idiag cmd access file operation
+ * @inode: The inode pointer that contains a vport pointer. (unused)
+ * @file: The file pointer that contains the buffer to release.
+ *
+ * Description:
+ * This routine frees the buffer that was allocated when the debugfs file
+ * was opened. It also reset the fields in the idiag command struct in the
+ * case the command is not continuous browsing of the data structure.
+ *
+ * Returns:
+ * This function returns zero.
+ **/
+static int
+lpfc_idiag_cmd_release(struct inode *inode, struct file *file)
+{
+	struct lpfc_debug *debug = file->private_data;
+
+	/* Read PCI config register, if not read all, clear command fields */
+	if ((debug->op == LPFC_IDIAG_OP_RD) &&
+	    (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD))
+		if ((idiag.cmd.data[1] == sizeof(uint8_t)) ||
+		    (idiag.cmd.data[1] == sizeof(uint16_t)) ||
+		    (idiag.cmd.data[1] == sizeof(uint32_t)))
+			memset(&idiag, 0, sizeof(idiag));
+
+	/* Write PCI config register, clear command fields */
+	if ((debug->op == LPFC_IDIAG_OP_WR) &&
+	    (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR))
+		memset(&idiag, 0, sizeof(idiag));
+
+	/* Free the buffers to the file operation */
+	kfree(debug->buffer);
+	kfree(debug);
+
+	return 0;
+}
+
+/**
+ * lpfc_idiag_pcicfg_read - idiag debugfs read pcicfg
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba pci config space according to the
+ * idiag command, and copies to user @buf. Depending on the PCI config space
+ * read command setup, it does either a single register read of a byte
+ * (8 bits), a word (16 bits), or a dword (32 bits) or browsing through all
+ * registers from the 4K extended PCI config space.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_pcicfg_read(struct file *file, char __user *buf, size_t nbytes,
+		       loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	int offset_label, offset, len = 0, index = LPFC_PCI_CFG_RD_SIZE;
+	int where, count;
+	char *pbuffer;
+	struct pci_dev *pdev;
+	uint32_t u32val;
+	uint16_t u16val;
+	uint8_t u8val;
+
+	pdev = phba->pcidev;
+	if (!pdev)
+		return 0;
+
+	/* This is a user read operation */
+	debug->op = LPFC_IDIAG_OP_RD;
+
+	if (!debug->buffer)
+		debug->buffer = kmalloc(LPFC_PCI_CFG_SIZE, GFP_KERNEL);
+	if (!debug->buffer)
+		return 0;
+	pbuffer = debug->buffer;
+
+	if (*ppos)
+		return 0;
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+		where = idiag.cmd.data[0];
+		count = idiag.cmd.data[1];
+	} else
+		return 0;
+
+	/* Read single PCI config space register */
+	switch (count) {
+	case SIZE_U8: /* byte (8 bits) */
+		pci_read_config_byte(pdev, where, &u8val);
+		len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+				"%03x: %02x\n", where, u8val);
+		break;
+	case SIZE_U16: /* word (16 bits) */
+		pci_read_config_word(pdev, where, &u16val);
+		len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+				"%03x: %04x\n", where, u16val);
+		break;
+	case SIZE_U32: /* double word (32 bits) */
+		pci_read_config_dword(pdev, where, &u32val);
+		len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+				"%03x: %08x\n", where, u32val);
+		break;
+	case LPFC_PCI_CFG_SIZE: /* browse all */
+		goto pcicfg_browse;
+		break;
+	default:
+		/* illegal count */
+		len = 0;
+		break;
+	}
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+
+pcicfg_browse:
+
+	/* Browse all PCI config space registers */
+	offset_label = idiag.offset.last_rd;
+	offset = offset_label;
+
+	/* Read PCI config space */
+	len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+			"%03x: ", offset_label);
+	while (index > 0) {
+		pci_read_config_dword(pdev, offset, &u32val);
+		len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+				"%08x ", u32val);
+		offset += sizeof(uint32_t);
+		index -= sizeof(uint32_t);
+		if (!index)
+			len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+					"\n");
+		else if (!(index % (8 * sizeof(uint32_t)))) {
+			offset_label += (8 * sizeof(uint32_t));
+			len += snprintf(pbuffer+len, LPFC_PCI_CFG_SIZE-len,
+					"\n%03x: ", offset_label);
+		}
+	}
+
+	/* Set up the offset for next portion of pci cfg read */
+	idiag.offset.last_rd += LPFC_PCI_CFG_RD_SIZE;
+	if (idiag.offset.last_rd >= LPFC_PCI_CFG_SIZE)
+		idiag.offset.last_rd = 0;
+
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
+/**
+ * lpfc_idiag_pcicfg_write - Syntax check and set up idiag pcicfg commands
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the user data from.
+ * @nbytes: The number of bytes to get.
+ * @ppos: The position in the file to start reading from.
+ *
+ * This routine get the debugfs idiag command struct from user space and
+ * then perform the syntax check for PCI config space read or write command
+ * accordingly. In the case of PCI config space read command, it sets up
+ * the command in the idiag command struct for the debugfs read operation.
+ * In the case of PCI config space write operation, it executes the write
+ * operation into the PCI config space accordingly.
+ *
+ * It returns the @nbytges passing in from debugfs user space when successful.
+ * In case of error conditions, it returns proper error code back to the user
+ * space.
+ */
+static ssize_t
+lpfc_idiag_pcicfg_write(struct file *file, const char __user *buf,
+			size_t nbytes, loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	uint32_t where, value, count;
+	uint32_t u32val;
+	uint16_t u16val;
+	uint8_t u8val;
+	struct pci_dev *pdev;
+	int rc;
+
+	pdev = phba->pcidev;
+	if (!pdev)
+		return -EFAULT;
+
+	/* This is a user write operation */
+	debug->op = LPFC_IDIAG_OP_WR;
+
+	rc = lpfc_idiag_cmd_get(buf, nbytes, &idiag.cmd);
+	if (rc)
+		return rc;
+
+	if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_RD) {
+		/* Read command from PCI config space, set up command fields */
+		where = idiag.cmd.data[0];
+		count = idiag.cmd.data[1];
+		if (count == LPFC_PCI_CFG_SIZE) {
+			if (where != 0)
+				goto error_out;
+		} else if ((count != sizeof(uint8_t)) &&
+			   (count != sizeof(uint16_t)) &&
+			   (count != sizeof(uint32_t)))
+			goto error_out;
+		if (count == sizeof(uint8_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
+				goto error_out;
+			if (where % sizeof(uint8_t))
+				goto error_out;
+		}
+		if (count == sizeof(uint16_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
+				goto error_out;
+			if (where % sizeof(uint16_t))
+				goto error_out;
+		}
+		if (count == sizeof(uint32_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
+				goto error_out;
+			if (where % sizeof(uint32_t))
+				goto error_out;
+		}
+	} else if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR ||
+		   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST ||
+		   idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+		/* Write command to PCI config space, read-modify-write */
+		where = idiag.cmd.data[0];
+		count = idiag.cmd.data[1];
+		value = idiag.cmd.data[2];
+		/* Sanity checks */
+		if ((count != sizeof(uint8_t)) &&
+		    (count != sizeof(uint16_t)) &&
+		    (count != sizeof(uint32_t)))
+			goto error_out;
+		if (count == sizeof(uint8_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint8_t))
+				goto error_out;
+			if (where % sizeof(uint8_t))
+				goto error_out;
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+				pci_write_config_byte(pdev, where,
+						      (uint8_t)value);
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+				rc = pci_read_config_byte(pdev, where, &u8val);
+				if (!rc) {
+					u8val |= (uint8_t)value;
+					pci_write_config_byte(pdev, where,
+							      u8val);
+				}
+			}
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+				rc = pci_read_config_byte(pdev, where, &u8val);
+				if (!rc) {
+					u8val &= (uint8_t)(~value);
+					pci_write_config_byte(pdev, where,
+							      u8val);
+				}
+			}
+		}
+		if (count == sizeof(uint16_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint16_t))
+				goto error_out;
+			if (where % sizeof(uint16_t))
+				goto error_out;
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+				pci_write_config_word(pdev, where,
+						      (uint16_t)value);
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+				rc = pci_read_config_word(pdev, where, &u16val);
+				if (!rc) {
+					u16val |= (uint16_t)value;
+					pci_write_config_word(pdev, where,
+							      u16val);
+				}
+			}
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+				rc = pci_read_config_word(pdev, where, &u16val);
+				if (!rc) {
+					u16val &= (uint16_t)(~value);
+					pci_write_config_word(pdev, where,
+							      u16val);
+				}
+			}
+		}
+		if (count == sizeof(uint32_t)) {
+			if (where > LPFC_PCI_CFG_SIZE - sizeof(uint32_t))
+				goto error_out;
+			if (where % sizeof(uint32_t))
+				goto error_out;
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_WR)
+				pci_write_config_dword(pdev, where, value);
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_ST) {
+				rc = pci_read_config_dword(pdev, where,
+							   &u32val);
+				if (!rc) {
+					u32val |= value;
+					pci_write_config_dword(pdev, where,
+							       u32val);
+				}
+			}
+			if (idiag.cmd.opcode == LPFC_IDIAG_CMD_PCICFG_CL) {
+				rc = pci_read_config_dword(pdev, where,
+							   &u32val);
+				if (!rc) {
+					u32val &= ~value;
+					pci_write_config_dword(pdev, where,
+							       u32val);
+				}
+			}
+		}
+	} else
+		/* All other opecodes are illegal for now */
+		goto error_out;
+
+	return nbytes;
+error_out:
+	memset(&idiag, 0, sizeof(idiag));
+	return -EINVAL;
+}
+
+/**
+ * lpfc_idiag_queinfo_read - idiag debugfs read queue information
+ * @file: The file pointer to read from.
+ * @buf: The buffer to copy the data to.
+ * @nbytes: The number of bytes to read.
+ * @ppos: The position in the file to start reading from.
+ *
+ * Description:
+ * This routine reads data from the @phba SLI4 PCI function queue information,
+ * and copies to user @buf.
+ *
+ * Returns:
+ * This function returns the amount of data that was read (this could be less
+ * than @nbytes if the end of the file was reached) or a negative error value.
+ **/
+static ssize_t
+lpfc_idiag_queinfo_read(struct file *file, char __user *buf, size_t nbytes,
+			loff_t *ppos)
+{
+	struct lpfc_debug *debug = file->private_data;
+	struct lpfc_hba *phba = (struct lpfc_hba *)debug->i_private;
+	int len = 0, fcp_qidx;
+	char *pbuffer;
+
+	if (!debug->buffer)
+		debug->buffer = kmalloc(LPFC_QUE_INFO_GET_BUF_SIZE, GFP_KERNEL);
+	if (!debug->buffer)
+		return 0;
+	pbuffer = debug->buffer;
+
+	if (*ppos)
+		return 0;
+
+	/* Get slow-path event queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Slow-path EQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], EQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			phba->sli4_hba.sp_eq->queue_id,
+			phba->sli4_hba.sp_eq->entry_count,
+			phba->sli4_hba.sp_eq->host_index,
+			phba->sli4_hba.sp_eq->hba_index);
+
+	/* Get fast-path event queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Fast-path EQ information:\n");
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
+		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+				"\tID [%02d], EQE-COUNT [%04d], "
+				"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+				phba->sli4_hba.fp_eq[fcp_qidx]->queue_id,
+				phba->sli4_hba.fp_eq[fcp_qidx]->entry_count,
+				phba->sli4_hba.fp_eq[fcp_qidx]->host_index,
+				phba->sli4_hba.fp_eq[fcp_qidx]->hba_index);
+	}
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+	/* Get mailbox complete queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Mailbox CQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\t\tAssociated EQ-ID [%02d]:\n",
+			phba->sli4_hba.mbx_cq->assoc_qid);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], CQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			phba->sli4_hba.mbx_cq->queue_id,
+			phba->sli4_hba.mbx_cq->entry_count,
+			phba->sli4_hba.mbx_cq->host_index,
+			phba->sli4_hba.mbx_cq->hba_index);
+
+	/* Get slow-path complete queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Slow-path CQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\t\tAssociated EQ-ID [%02d]:\n",
+			phba->sli4_hba.els_cq->assoc_qid);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], CQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			phba->sli4_hba.els_cq->queue_id,
+			phba->sli4_hba.els_cq->entry_count,
+			phba->sli4_hba.els_cq->host_index,
+			phba->sli4_hba.els_cq->hba_index);
+
+	/* Get fast-path complete queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Fast-path CQ information:\n");
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_eq_count; fcp_qidx++) {
+		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+				"\t\tAssociated EQ-ID [%02d]:\n",
+				phba->sli4_hba.fcp_cq[fcp_qidx]->assoc_qid);
+		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+		"\tID [%02d], EQE-COUNT [%04d], "
+		"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+		phba->sli4_hba.fcp_cq[fcp_qidx]->queue_id,
+		phba->sli4_hba.fcp_cq[fcp_qidx]->entry_count,
+		phba->sli4_hba.fcp_cq[fcp_qidx]->host_index,
+		phba->sli4_hba.fcp_cq[fcp_qidx]->hba_index);
+	}
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+	/* Get mailbox queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Mailbox MQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\t\tAssociated CQ-ID [%02d]:\n",
+			phba->sli4_hba.mbx_wq->assoc_qid);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], MQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			phba->sli4_hba.mbx_wq->queue_id,
+			phba->sli4_hba.mbx_wq->entry_count,
+			phba->sli4_hba.mbx_wq->host_index,
+			phba->sli4_hba.mbx_wq->hba_index);
+
+	/* Get slow-path work queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Slow-path WQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\t\tAssociated CQ-ID [%02d]:\n",
+			phba->sli4_hba.els_wq->assoc_qid);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], WQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n\n",
+			phba->sli4_hba.els_wq->queue_id,
+			phba->sli4_hba.els_wq->entry_count,
+			phba->sli4_hba.els_wq->host_index,
+			phba->sli4_hba.els_wq->hba_index);
+
+	/* Get fast-path work queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Fast-path WQ information:\n");
+	for (fcp_qidx = 0; fcp_qidx < phba->cfg_fcp_wq_count; fcp_qidx++) {
+		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+				"\t\tAssociated CQ-ID [%02d]:\n",
+				phba->sli4_hba.fcp_wq[fcp_qidx]->assoc_qid);
+		len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+				"\tID [%02d], WQE-COUNT [%04d], "
+				"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+				phba->sli4_hba.fcp_wq[fcp_qidx]->queue_id,
+				phba->sli4_hba.fcp_wq[fcp_qidx]->entry_count,
+				phba->sli4_hba.fcp_wq[fcp_qidx]->host_index,
+				phba->sli4_hba.fcp_wq[fcp_qidx]->hba_index);
+	}
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len, "\n");
+
+	/* Get receive queue information */
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"Slow-path RQ information:\n");
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\t\tAssociated CQ-ID [%02d]:\n",
+			phba->sli4_hba.hdr_rq->assoc_qid);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], RHQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+			phba->sli4_hba.hdr_rq->queue_id,
+			phba->sli4_hba.hdr_rq->entry_count,
+			phba->sli4_hba.hdr_rq->host_index,
+			phba->sli4_hba.hdr_rq->hba_index);
+	len += snprintf(pbuffer+len, LPFC_QUE_INFO_GET_BUF_SIZE-len,
+			"\tID [%02d], RDQE-COUNT [%04d], "
+			"HOST-INDEX [%04x], PORT-INDEX [%04x]\n",
+			phba->sli4_hba.dat_rq->queue_id,
+			phba->sli4_hba.dat_rq->entry_count,
+			phba->sli4_hba.dat_rq->host_index,
+			phba->sli4_hba.dat_rq->hba_index);
+
+	return simple_read_from_buffer(buf, nbytes, ppos, pbuffer, len);
+}
+
 #undef lpfc_debugfs_op_disc_trc
 static const struct file_operations lpfc_debugfs_op_disc_trc = {
 	.owner =        THIS_MODULE,
@@ -1213,6 +1964,28 @@ static const struct file_operations lpfc_debugfs_op_slow_ring_trc = {
 
 static struct dentry *lpfc_debugfs_root = NULL;
 static atomic_t lpfc_debugfs_hba_count;
+
+/*
+ * File operations for the iDiag debugfs
+ */
+#undef lpfc_idiag_op_pciCfg
+static const struct file_operations lpfc_idiag_op_pciCfg = {
+	.owner =        THIS_MODULE,
+	.open =         lpfc_idiag_open,
+	.llseek =       lpfc_debugfs_lseek,
+	.read =         lpfc_idiag_pcicfg_read,
+	.write =        lpfc_idiag_pcicfg_write,
+	.release =      lpfc_idiag_cmd_release,
+};
+
+#undef lpfc_idiag_op_queInfo
+static const struct file_operations lpfc_idiag_op_queInfo = {
+	.owner =        THIS_MODULE,
+	.open =         lpfc_idiag_open,
+	.read =         lpfc_idiag_queinfo_read,
+	.release =      lpfc_idiag_release,
+};
+
 #endif
 
 /**
@@ -1249,8 +2022,8 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 	if (!lpfc_debugfs_start_time)
 		lpfc_debugfs_start_time = jiffies;
 
-	/* Setup lpfcX directory for specific HBA */
-	snprintf(name, sizeof(name), "lpfc%d", phba->brd_no);
+	/* Setup funcX directory for specific HBA PCI function */
+	snprintf(name, sizeof(name), "fn%d", phba->brd_no);
 	if (!phba->hba_debugfs_root) {
 		phba->hba_debugfs_root =
 			debugfs_create_dir(name, lpfc_debugfs_root);
@@ -1275,28 +2048,38 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 		}
 
 		/* Setup dumpHBASlim */
-		snprintf(name, sizeof(name), "dumpHBASlim");
-		phba->debug_dumpHBASlim =
-			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
-				 phba->hba_debugfs_root,
-				 phba, &lpfc_debugfs_op_dumpHBASlim);
-		if (!phba->debug_dumpHBASlim) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				"0413 Cannot create debugfs dumpHBASlim\n");
-			goto debug_failed;
-		}
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			snprintf(name, sizeof(name), "dumpHBASlim");
+			phba->debug_dumpHBASlim =
+				debugfs_create_file(name,
+					S_IFREG|S_IRUGO|S_IWUSR,
+					phba->hba_debugfs_root,
+					phba, &lpfc_debugfs_op_dumpHBASlim);
+			if (!phba->debug_dumpHBASlim) {
+				lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+						 "0413 Cannot create debugfs "
+						"dumpHBASlim\n");
+				goto debug_failed;
+			}
+		} else
+			phba->debug_dumpHBASlim = NULL;
 
 		/* Setup dumpHostSlim */
-		snprintf(name, sizeof(name), "dumpHostSlim");
-		phba->debug_dumpHostSlim =
-			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
-				 phba->hba_debugfs_root,
-				 phba, &lpfc_debugfs_op_dumpHostSlim);
-		if (!phba->debug_dumpHostSlim) {
-			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
-				"0414 Cannot create debugfs dumpHostSlim\n");
-			goto debug_failed;
-		}
+		if (phba->sli_rev < LPFC_SLI_REV4) {
+			snprintf(name, sizeof(name), "dumpHostSlim");
+			phba->debug_dumpHostSlim =
+				debugfs_create_file(name,
+					S_IFREG|S_IRUGO|S_IWUSR,
+					phba->hba_debugfs_root,
+					phba, &lpfc_debugfs_op_dumpHostSlim);
+			if (!phba->debug_dumpHostSlim) {
+				lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+						 "0414 Cannot create debugfs "
+						 "dumpHostSlim\n");
+				goto debug_failed;
+			}
+		} else
+			phba->debug_dumpHBASlim = NULL;
 
 		/* Setup dumpData */
 		snprintf(name, sizeof(name), "dumpData");
@@ -1322,8 +2105,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			goto debug_failed;
 		}
 
-
-
 		/* Setup slow ring trace */
 		if (lpfc_debugfs_max_slow_ring_trc) {
 			num = lpfc_debugfs_max_slow_ring_trc - 1;
@@ -1342,7 +2123,6 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 			}
 		}
 
-
 		snprintf(name, sizeof(name), "slow_ring_trace");
 		phba->debug_slow_ring_trc =
 			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
@@ -1434,6 +2214,53 @@ lpfc_debugfs_initialize(struct lpfc_vport *vport)
 				 "0409 Cant create debugfs nodelist\n");
 		goto debug_failed;
 	}
+
+	/*
+	 * iDiag debugfs root entry points for SLI4 device only
+	 */
+	if (phba->sli_rev < LPFC_SLI_REV4)
+		goto debug_failed;
+
+	snprintf(name, sizeof(name), "iDiag");
+	if (!phba->idiag_root) {
+		phba->idiag_root =
+			debugfs_create_dir(name, phba->hba_debugfs_root);
+		if (!phba->idiag_root) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+					 "2922 Can't create idiag debugfs\n");
+			goto debug_failed;
+		}
+		/* Initialize iDiag data structure */
+		memset(&idiag, 0, sizeof(idiag));
+	}
+
+	/* iDiag read PCI config space */
+	snprintf(name, sizeof(name), "pciCfg");
+	if (!phba->idiag_pci_cfg) {
+		phba->idiag_pci_cfg =
+			debugfs_create_file(name, S_IFREG|S_IRUGO|S_IWUSR,
+				phba->idiag_root, phba, &lpfc_idiag_op_pciCfg);
+		if (!phba->idiag_pci_cfg) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+					 "2923 Can't create idiag debugfs\n");
+			goto debug_failed;
+		}
+		idiag.offset.last_rd = 0;
+	}
+
+	/* iDiag get PCI function queue information */
+	snprintf(name, sizeof(name), "queInfo");
+	if (!phba->idiag_que_info) {
+		phba->idiag_que_info =
+			debugfs_create_file(name, S_IFREG|S_IRUGO,
+			phba->idiag_root, phba, &lpfc_idiag_op_queInfo);
+		if (!phba->idiag_que_info) {
+			lpfc_printf_vlog(vport, KERN_ERR, LOG_INIT,
+					 "2924 Can't create idiag debugfs\n");
+			goto debug_failed;
+		}
+	}
+
 debug_failed:
 	return;
 #endif
@@ -1508,8 +2335,31 @@ lpfc_debugfs_terminate(struct lpfc_vport *vport)
 			phba->debug_slow_ring_trc = NULL;
 		}
 
+		/*
+		 * iDiag release
+		 */
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			if (phba->idiag_que_info) {
+				/* iDiag queInfo */
+				debugfs_remove(phba->idiag_que_info);
+				phba->idiag_que_info = NULL;
+			}
+			if (phba->idiag_pci_cfg) {
+				/* iDiag pciCfg */
+				debugfs_remove(phba->idiag_pci_cfg);
+				phba->idiag_pci_cfg = NULL;
+			}
+
+			/* Finally remove the iDiag debugfs root */
+			if (phba->idiag_root) {
+				/* iDiag root */
+				debugfs_remove(phba->idiag_root);
+				phba->idiag_root = NULL;
+			}
+		}
+
 		if (phba->hba_debugfs_root) {
-			debugfs_remove(phba->hba_debugfs_root); /* lpfcX */
+			debugfs_remove(phba->hba_debugfs_root); /* fnX */
 			phba->hba_debugfs_root = NULL;
 			atomic_dec(&lpfc_debugfs_hba_count);
 		}
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.h b/drivers/scsi/lpfc/lpfc_debugfs.h
index 03c7313a1012..91b9a9427cda 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.h
+++ b/drivers/scsi/lpfc/lpfc_debugfs.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2007 Emulex.  All rights reserved.                *
+ * Copyright (C) 2007-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -22,6 +22,44 @@
 #define _H_LPFC_DEBUG_FS
 
 #ifdef CONFIG_SCSI_LPFC_DEBUG_FS
+
+/* size of output line, for discovery_trace and slow_ring_trace */
+#define LPFC_DEBUG_TRC_ENTRY_SIZE 100
+
+/* nodelist output buffer size */
+#define LPFC_NODELIST_SIZE 8192
+#define LPFC_NODELIST_ENTRY_SIZE 120
+
+/* dumpHBASlim output buffer size */
+#define LPFC_DUMPHBASLIM_SIZE 4096
+
+/* dumpHostSlim output buffer size */
+#define LPFC_DUMPHOSTSLIM_SIZE 4096
+
+/* hbqinfo output buffer size */
+#define LPFC_HBQINFO_SIZE 8192
+
+/* rdPciConf output buffer size */
+#define LPFC_PCI_CFG_SIZE 4096
+#define LPFC_PCI_CFG_RD_BUF_SIZE (LPFC_PCI_CFG_SIZE/2)
+#define LPFC_PCI_CFG_RD_SIZE (LPFC_PCI_CFG_SIZE/4)
+
+/* queue info output buffer size */
+#define LPFC_QUE_INFO_GET_BUF_SIZE 2048
+
+#define SIZE_U8  sizeof(uint8_t)
+#define SIZE_U16 sizeof(uint16_t)
+#define SIZE_U32 sizeof(uint32_t)
+
+struct lpfc_debug {
+	char *i_private;
+	char op;
+#define LPFC_IDIAG_OP_RD 1
+#define LPFC_IDIAG_OP_WR 2
+	char *buffer;
+	int  len;
+};
+
 struct lpfc_debugfs_trc {
 	char *fmt;
 	uint32_t data1;
@@ -30,6 +68,26 @@ struct lpfc_debugfs_trc {
 	uint32_t seq_cnt;
 	unsigned long jif;
 };
+
+struct lpfc_idiag_offset {
+	uint32_t last_rd;
+};
+
+#define LPFC_IDIAG_CMD_DATA_SIZE 4
+struct lpfc_idiag_cmd {
+	uint32_t opcode;
+#define LPFC_IDIAG_CMD_PCICFG_RD 0x00000001
+#define LPFC_IDIAG_CMD_PCICFG_WR 0x00000002
+#define LPFC_IDIAG_CMD_PCICFG_ST 0x00000003
+#define LPFC_IDIAG_CMD_PCICFG_CL 0x00000004
+	uint32_t data[LPFC_IDIAG_CMD_DATA_SIZE];
+};
+
+struct lpfc_idiag {
+	uint32_t active;
+	struct lpfc_idiag_cmd cmd;
+	struct lpfc_idiag_offset offset;
+};
 #endif
 
 /* Mask for discovery_trace */
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index c62d567cc845..8e28edf9801e 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2009 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  * Portions Copyright (C) 2004-2005 Christoph Hellwig              *
@@ -485,6 +485,59 @@ fail:
 }
 
 /**
+ * lpfc_check_clean_addr_bit - Check whether assigned FCID is clean.
+ * @vport: pointer to a host virtual N_Port data structure.
+ * @sp: pointer to service parameter data structure.
+ *
+ * This routine is called from FLOGI/FDISC completion handler functions.
+ * lpfc_check_clean_addr_bit return 1 when FCID/Fabric portname/ Fabric
+ * node nodename is changed in the completion service parameter else return
+ * 0. This function also set flag in the vport data structure to delay
+ * NP_Port discovery after the FLOGI/FDISC completion if Clean address bit
+ * in FLOGI/FDISC response is cleared and FCID/Fabric portname/ Fabric
+ * node nodename is changed in the completion service parameter.
+ *
+ * Return code
+ *   0 - FCID and Fabric Nodename and Fabric portname is not changed.
+ *   1 - FCID or Fabric Nodename or Fabric portname is changed.
+ *
+ **/
+static uint8_t
+lpfc_check_clean_addr_bit(struct lpfc_vport *vport,
+		struct serv_parm *sp)
+{
+	uint8_t fabric_param_changed = 0;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+	if ((vport->fc_prevDID != vport->fc_myDID) ||
+		memcmp(&vport->fabric_portname, &sp->portName,
+			sizeof(struct lpfc_name)) ||
+		memcmp(&vport->fabric_nodename, &sp->nodeName,
+			sizeof(struct lpfc_name)))
+		fabric_param_changed = 1;
+
+	/*
+	 * Word 1 Bit 31 in common service parameter is overloaded.
+	 * Word 1 Bit 31 in FLOGI request is multiple NPort request
+	 * Word 1 Bit 31 in FLOGI response is clean address bit
+	 *
+	 * If fabric parameter is changed and clean address bit is
+	 * cleared delay nport discovery if
+	 * - vport->fc_prevDID != 0 (not initial discovery) OR
+	 * - lpfc_delay_discovery module parameter is set.
+	 */
+	if (fabric_param_changed && !sp->cmn.clean_address_bit &&
+	    (vport->fc_prevDID || lpfc_delay_discovery)) {
+		spin_lock_irq(shost->host_lock);
+		vport->fc_flag |= FC_DISC_DELAYED;
+		spin_unlock_irq(shost->host_lock);
+	}
+
+	return fabric_param_changed;
+}
+
+
+/**
  * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
  * @vport: pointer to a host virtual N_Port data structure.
  * @ndlp: pointer to a node-list data structure.
@@ -512,6 +565,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	struct lpfc_hba  *phba = vport->phba;
 	struct lpfc_nodelist *np;
 	struct lpfc_nodelist *next_np;
+	uint8_t fabric_param_changed;
 
 	spin_lock_irq(shost->host_lock);
 	vport->fc_flag |= FC_FABRIC;
@@ -544,6 +598,12 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		ndlp->nlp_class_sup |= FC_COS_CLASS4;
 	ndlp->nlp_maxframe = ((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) |
 				sp->cmn.bbRcvSizeLsb;
+
+	fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
+	memcpy(&vport->fabric_portname, &sp->portName,
+			sizeof(struct lpfc_name));
+	memcpy(&vport->fabric_nodename, &sp->nodeName,
+			sizeof(struct lpfc_name));
 	memcpy(&phba->fc_fabparam, sp, sizeof(struct serv_parm));
 
 	if (phba->sli3_options & LPFC_SLI3_NPIV_ENABLED) {
@@ -565,7 +625,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 		}
 	}
 
-	if ((vport->fc_prevDID != vport->fc_myDID) &&
+	if (fabric_param_changed &&
 		!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
 
 		/* If our NportID changed, we need to ensure all
@@ -2203,6 +2263,7 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct Scsi_Host  *shost = lpfc_shost_from_vport(vport);
 	IOCB_t *irsp;
 	struct lpfc_sli *psli;
+	struct lpfcMboxq *mbox;
 
 	psli = &phba->sli;
 	/* we pass cmdiocb to state machine which needs rspiocb as well */
@@ -2260,6 +2321,21 @@ lpfc_cmpl_els_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 					NLP_EVT_CMPL_LOGO);
 out:
 	lpfc_els_free_iocb(phba, cmdiocb);
+	/* If we are in pt2pt mode, we could rcv new S_ID on PLOGI */
+	if ((vport->fc_flag & FC_PT2PT) &&
+		!(vport->fc_flag & FC_PT2PT_PLOGI)) {
+		phba->pport->fc_myDID = 0;
+		mbox = mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+		if (mbox) {
+			lpfc_config_link(phba, mbox);
+			mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
+			mbox->vport = vport;
+			if (lpfc_sli_issue_mbox(phba, mbox, MBX_NOWAIT) ==
+				MBX_NOT_FINISHED) {
+				mempool_free(mbox, phba->mbox_mem_pool);
+			}
+		}
+	}
 	return;
 }
 
@@ -2745,7 +2821,8 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp)
 		}
 		break;
 	case ELS_CMD_FDISC:
-		lpfc_issue_els_fdisc(vport, ndlp, retry);
+		if (!(vport->fc_flag & FC_VPORT_NEEDS_INIT_VPI))
+			lpfc_issue_els_fdisc(vport, ndlp, retry);
 		break;
 	}
 	return;
@@ -2815,9 +2892,17 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	switch (irsp->ulpStatus) {
 	case IOSTAT_FCP_RSP_ERROR:
+		break;
 	case IOSTAT_REMOTE_STOP:
+		if (phba->sli_rev == LPFC_SLI_REV4) {
+			/* This IO was aborted by the target, we don't
+			 * know the rxid and because we did not send the
+			 * ABTS we cannot generate and RRQ.
+			 */
+			lpfc_set_rrq_active(phba, ndlp,
+					 cmdiocb->sli4_xritag, 0, 0);
+		}
 		break;
-
 	case IOSTAT_LOCAL_REJECT:
 		switch ((irsp->un.ulpWord[4] & 0xff)) {
 		case IOERR_LOOP_OPEN_FAILURE:
@@ -4013,28 +4098,34 @@ lpfc_els_clear_rrq(struct lpfc_vport *vport,
 	uint8_t *pcmd;
 	struct RRQ *rrq;
 	uint16_t rxid;
+	uint16_t xri;
 	struct lpfc_node_rrq *prrq;
 
 
 	pcmd = (uint8_t *) (((struct lpfc_dmabuf *) iocb->context2)->virt);
 	pcmd += sizeof(uint32_t);
 	rrq = (struct RRQ *)pcmd;
-	rxid = bf_get(rrq_oxid, rrq);
+	rrq->rrq_exchg = be32_to_cpu(rrq->rrq_exchg);
+	rxid = be16_to_cpu(bf_get(rrq_rxid, rrq));
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			"2883 Clear RRQ for SID:x%x OXID:x%x RXID:x%x"
 			" x%x x%x\n",
-			bf_get(rrq_did, rrq),
-			bf_get(rrq_oxid, rrq),
+			be32_to_cpu(bf_get(rrq_did, rrq)),
+			be16_to_cpu(bf_get(rrq_oxid, rrq)),
 			rxid,
 			iocb->iotag, iocb->iocb.ulpContext);
 
 	lpfc_debugfs_disc_trc(vport, LPFC_DISC_TRC_ELS_RSP,
 		"Clear RRQ:  did:x%x flg:x%x exchg:x%.08x",
 		ndlp->nlp_DID, ndlp->nlp_flag, rrq->rrq_exchg);
-	prrq = lpfc_get_active_rrq(vport, rxid, ndlp->nlp_DID);
+	if (vport->fc_myDID == be32_to_cpu(bf_get(rrq_did, rrq)))
+		xri = be16_to_cpu(bf_get(rrq_oxid, rrq));
+	else
+		xri = rxid;
+	prrq = lpfc_get_active_rrq(vport, xri, ndlp->nlp_DID);
 	if (prrq)
-		lpfc_clr_rrq_active(phba, rxid, prrq);
+		lpfc_clr_rrq_active(phba, xri, prrq);
 	return;
 }
 
@@ -6166,6 +6257,11 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 	if (vport->load_flag & FC_UNLOADING)
 		goto dropit;
 
+	/* If NPort discovery is delayed drop incoming ELS */
+	if ((vport->fc_flag & FC_DISC_DELAYED) &&
+			(cmd != ELS_CMD_PLOGI))
+		goto dropit;
+
 	ndlp = lpfc_findnode_did(vport, did);
 	if (!ndlp) {
 		/* Cannot find existing Fabric ndlp, so allocate a new one */
@@ -6218,6 +6314,12 @@ lpfc_els_unsol_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
 		ndlp = lpfc_plogi_confirm_nport(phba, payload, ndlp);
 
 		lpfc_send_els_event(vport, ndlp, payload);
+
+		/* If Nport discovery is delayed, reject PLOGIs */
+		if (vport->fc_flag & FC_DISC_DELAYED) {
+			rjt_err = LSRJT_UNABLE_TPC;
+			break;
+		}
 		if (vport->port_state < LPFC_DISC_AUTH) {
 			if (!(phba->pport->fc_flag & FC_PT2PT) ||
 				(phba->pport->fc_flag & FC_PT2PT_PLOGI)) {
@@ -6596,6 +6698,21 @@ void
 lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
 {
 	struct lpfc_nodelist *ndlp, *ndlp_fdmi;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
+
+	/*
+	 * If lpfc_delay_discovery parameter is set and the clean address
+	 * bit is cleared and fc fabric parameters chenged, delay FC NPort
+	 * discovery.
+	 */
+	spin_lock_irq(shost->host_lock);
+	if (vport->fc_flag & FC_DISC_DELAYED) {
+		spin_unlock_irq(shost->host_lock);
+		mod_timer(&vport->delayed_disc_tmo,
+			jiffies + HZ * phba->fc_ratov);
+		return;
+	}
+	spin_unlock_irq(shost->host_lock);
 
 	ndlp = lpfc_findnode_did(vport, NameServer_DID);
 	if (!ndlp) {
@@ -6938,6 +7055,9 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 	struct lpfc_nodelist *next_np;
 	IOCB_t *irsp = &rspiocb->iocb;
 	struct lpfc_iocbq *piocb;
+	struct lpfc_dmabuf *pcmd = cmdiocb->context2, *prsp;
+	struct serv_parm *sp;
+	uint8_t fabric_param_changed;
 
 	lpfc_printf_vlog(vport, KERN_INFO, LOG_ELS,
 			 "0123 FDISC completes. x%x/x%x prevDID: x%x\n",
@@ -6981,7 +7101,14 @@ lpfc_cmpl_els_fdisc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
 
 	vport->fc_myDID = irsp->un.ulpWord[4] & Mask_DID;
 	lpfc_vport_set_state(vport, FC_VPORT_ACTIVE);
-	if ((vport->fc_prevDID != vport->fc_myDID) &&
+	prsp = list_get_first(&pcmd->list, struct lpfc_dmabuf, list);
+	sp = prsp->virt + sizeof(uint32_t);
+	fabric_param_changed = lpfc_check_clean_addr_bit(vport, sp);
+	memcpy(&vport->fabric_portname, &sp->portName,
+		sizeof(struct lpfc_name));
+	memcpy(&vport->fabric_nodename, &sp->nodeName,
+		sizeof(struct lpfc_name));
+	if (fabric_param_changed &&
 		!(vport->fc_flag & FC_VPORT_NEEDS_REG_VPI)) {
 		/* If our NportID changed, we need to ensure all
 		 * remaining NPORTs get unreg_login'ed so we can
@@ -7582,6 +7709,32 @@ void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
 }
 
 /**
+ * lpfc_sli4_vport_delete_els_xri_aborted -Remove all ndlp references for vport
+ * @vport: pointer to lpfc vport data structure.
+ *
+ * This routine is invoked by the vport cleanup for deletions and the cleanup
+ * for an ndlp on removal.
+ **/
+void
+lpfc_sli4_vport_delete_els_xri_aborted(struct lpfc_vport *vport)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_sglq *sglq_entry = NULL, *sglq_next = NULL;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	spin_lock(&phba->sli4_hba.abts_sgl_list_lock);
+	list_for_each_entry_safe(sglq_entry, sglq_next,
+			&phba->sli4_hba.lpfc_abts_els_sgl_list, list) {
+		if (sglq_entry->ndlp && sglq_entry->ndlp->vport == vport)
+			sglq_entry->ndlp = NULL;
+	}
+	spin_unlock(&phba->sli4_hba.abts_sgl_list_lock);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+	return;
+}
+
+/**
  * lpfc_sli4_els_xri_aborted - Slow-path process of els xri abort
  * @phba: pointer to lpfc hba data structure.
  * @axri: pointer to the els xri abort wcqe structure.
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index bb015960dbc9..154c715fb3af 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -658,6 +658,8 @@ lpfc_work_done(struct lpfc_hba *phba)
 				lpfc_ramp_down_queue_handler(phba);
 			if (work_port_events & WORKER_RAMP_UP_QUEUE)
 				lpfc_ramp_up_queue_handler(phba);
+			if (work_port_events & WORKER_DELAYED_DISC_TMO)
+				lpfc_delayed_disc_timeout_handler(vport);
 		}
 	lpfc_destroy_vport_work_array(phba, vports);
 
@@ -838,6 +840,11 @@ lpfc_linkdown_port(struct lpfc_vport *vport)
 
 	lpfc_port_link_failure(vport);
 
+	/* Stop delayed Nport discovery */
+	spin_lock_irq(shost->host_lock);
+	vport->fc_flag &= ~FC_DISC_DELAYED;
+	spin_unlock_irq(shost->host_lock);
+	del_timer_sync(&vport->delayed_disc_tmo);
 }
 
 int
@@ -3160,7 +3167,7 @@ lpfc_mbx_cmpl_unreg_vpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	spin_unlock_irq(shost->host_lock);
 	vport->unreg_vpi_cmpl = VPORT_OK;
 	mempool_free(pmb, phba->mbox_mem_pool);
-	lpfc_cleanup_vports_rrqs(vport);
+	lpfc_cleanup_vports_rrqs(vport, NULL);
 	/*
 	 * This shost reference might have been taken at the beginning of
 	 * lpfc_vport_delete()
@@ -3900,6 +3907,8 @@ lpfc_drop_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 	if (ndlp->nlp_state == NLP_STE_UNUSED_NODE)
 		return;
 	lpfc_nlp_set_state(vport, ndlp, NLP_STE_UNUSED_NODE);
+	if (vport->phba->sli_rev == LPFC_SLI_REV4)
+		lpfc_cleanup_vports_rrqs(vport, ndlp);
 	lpfc_nlp_put(ndlp);
 	return;
 }
@@ -4289,7 +4298,7 @@ lpfc_cleanup_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 	list_del_init(&ndlp->els_retry_evt.evt_listp);
 	list_del_init(&ndlp->dev_loss_evt.evt_listp);
-
+	lpfc_cleanup_vports_rrqs(vport, ndlp);
 	lpfc_unreg_rpi(vport, ndlp);
 
 	return 0;
@@ -4426,10 +4435,11 @@ lpfc_findnode_did(struct lpfc_vport *vport, uint32_t did)
 {
 	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 	struct lpfc_nodelist *ndlp;
+	unsigned long iflags;
 
-	spin_lock_irq(shost->host_lock);
+	spin_lock_irqsave(shost->host_lock, iflags);
 	ndlp = __lpfc_findnode_did(vport, did);
-	spin_unlock_irq(shost->host_lock);
+	spin_unlock_irqrestore(shost->host_lock, iflags);
 	return ndlp;
 }
 
diff --git a/drivers/scsi/lpfc/lpfc_hw.h b/drivers/scsi/lpfc/lpfc_hw.h
index 96ed3ba6ba95..94ae37c5111a 100644
--- a/drivers/scsi/lpfc/lpfc_hw.h
+++ b/drivers/scsi/lpfc/lpfc_hw.h
@@ -341,6 +341,12 @@ struct csp {
 	uint8_t bbCreditMsb;
 	uint8_t bbCreditlsb;	/* FC Word 0, byte 3 */
 
+/*
+ * Word 1 Bit 31 in common service parameter is overloaded.
+ * Word 1 Bit 31 in FLOGI request is multiple NPort request
+ * Word 1 Bit 31 in FLOGI response is clean address bit
+ */
+#define clean_address_bit request_multiple_Nport /* Word 1, bit 31 */
 #ifdef __BIG_ENDIAN_BITFIELD
 	uint16_t request_multiple_Nport:1;	/* FC Word 1, bit 31 */
 	uint16_t randomOffset:1;	/* FC Word 1, bit 30 */
@@ -3198,7 +3204,10 @@ typedef struct {
 #define IOERR_SLER_RRQ_RJT_ERR        0x4C
 #define IOERR_SLER_RRQ_RETRY_ERR      0x4D
 #define IOERR_SLER_ABTS_ERR           0x4E
-
+#define IOERR_ELXSEC_KEY_UNWRAP_ERROR		0xF0
+#define IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR	0xF1
+#define IOERR_ELXSEC_CRYPTO_ERROR		0xF2
+#define IOERR_ELXSEC_CRYPTO_COMPARE_ERROR	0xF3
 #define IOERR_DRVR_MASK               0x100
 #define IOERR_SLI_DOWN                0x101  /* ulpStatus  - Driver defined */
 #define IOERR_SLI_BRESET              0x102
diff --git a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
index 94c1aa1136de..c7178d60c7bf 100644
--- a/drivers/scsi/lpfc/lpfc_hw4.h
+++ b/drivers/scsi/lpfc/lpfc_hw4.h
@@ -778,6 +778,7 @@ struct mbox_header {
 #define LPFC_MBOX_OPCODE_QUERY_FW_CFG		0x3A
 #define LPFC_MBOX_OPCODE_FUNCTION_RESET		0x3D
 #define LPFC_MBOX_OPCODE_MQ_CREATE_EXT		0x5A
+#define LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS	0xB5
 
 /* FCoE Opcodes */
 #define LPFC_MBOX_OPCODE_FCOE_WQ_CREATE			0x01
@@ -1852,6 +1853,9 @@ struct lpfc_mbx_request_features {
 #define lpfc_mbx_rq_ftr_rq_ifip_SHIFT		7
 #define lpfc_mbx_rq_ftr_rq_ifip_MASK		0x00000001
 #define lpfc_mbx_rq_ftr_rq_ifip_WORD		word2
+#define lpfc_mbx_rq_ftr_rq_perfh_SHIFT		11
+#define lpfc_mbx_rq_ftr_rq_perfh_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rq_perfh_WORD		word2
 	uint32_t word3;
 #define lpfc_mbx_rq_ftr_rsp_iaab_SHIFT		0
 #define lpfc_mbx_rq_ftr_rsp_iaab_MASK		0x00000001
@@ -1877,6 +1881,9 @@ struct lpfc_mbx_request_features {
 #define lpfc_mbx_rq_ftr_rsp_ifip_SHIFT		7
 #define lpfc_mbx_rq_ftr_rsp_ifip_MASK		0x00000001
 #define lpfc_mbx_rq_ftr_rsp_ifip_WORD		word3
+#define lpfc_mbx_rq_ftr_rsp_perfh_SHIFT		11
+#define lpfc_mbx_rq_ftr_rsp_perfh_MASK		0x00000001
+#define lpfc_mbx_rq_ftr_rsp_perfh_WORD		word3
 };
 
 struct lpfc_mbx_supp_pages {
@@ -1935,7 +1942,7 @@ struct lpfc_mbx_supp_pages {
 #define LPFC_SLI4_PARAMETERS		2
 };
 
-struct lpfc_mbx_sli4_params {
+struct lpfc_mbx_pc_sli4_params {
 	uint32_t word1;
 #define qs_SHIFT				0
 #define qs_MASK					0x00000001
@@ -2051,6 +2058,88 @@ struct lpfc_mbx_sli4_params {
 	uint32_t rsvd_13_63[51];
 };
 
+struct lpfc_sli4_parameters {
+	uint32_t word0;
+#define cfg_prot_type_SHIFT			0
+#define cfg_prot_type_MASK			0x000000FF
+#define cfg_prot_type_WORD			word0
+	uint32_t word1;
+#define cfg_ft_SHIFT				0
+#define cfg_ft_MASK				0x00000001
+#define cfg_ft_WORD				word1
+#define cfg_sli_rev_SHIFT			4
+#define cfg_sli_rev_MASK			0x0000000f
+#define cfg_sli_rev_WORD			word1
+#define cfg_sli_family_SHIFT			8
+#define cfg_sli_family_MASK			0x0000000f
+#define cfg_sli_family_WORD			word1
+#define cfg_if_type_SHIFT			12
+#define cfg_if_type_MASK			0x0000000f
+#define cfg_if_type_WORD			word1
+#define cfg_sli_hint_1_SHIFT			16
+#define cfg_sli_hint_1_MASK			0x000000ff
+#define cfg_sli_hint_1_WORD			word1
+#define cfg_sli_hint_2_SHIFT			24
+#define cfg_sli_hint_2_MASK			0x0000001f
+#define cfg_sli_hint_2_WORD			word1
+	uint32_t word2;
+	uint32_t word3;
+	uint32_t word4;
+#define cfg_cqv_SHIFT				14
+#define cfg_cqv_MASK				0x00000003
+#define cfg_cqv_WORD				word4
+	uint32_t word5;
+	uint32_t word6;
+#define cfg_mqv_SHIFT				14
+#define cfg_mqv_MASK				0x00000003
+#define cfg_mqv_WORD				word6
+	uint32_t word7;
+	uint32_t word8;
+#define cfg_wqv_SHIFT				14
+#define cfg_wqv_MASK				0x00000003
+#define cfg_wqv_WORD				word8
+	uint32_t word9;
+	uint32_t word10;
+#define cfg_rqv_SHIFT				14
+#define cfg_rqv_MASK				0x00000003
+#define cfg_rqv_WORD				word10
+	uint32_t word11;
+#define cfg_rq_db_window_SHIFT			28
+#define cfg_rq_db_window_MASK			0x0000000f
+#define cfg_rq_db_window_WORD			word11
+	uint32_t word12;
+#define cfg_fcoe_SHIFT				0
+#define cfg_fcoe_MASK				0x00000001
+#define cfg_fcoe_WORD				word12
+#define cfg_phwq_SHIFT				15
+#define cfg_phwq_MASK				0x00000001
+#define cfg_phwq_WORD				word12
+#define cfg_loopbk_scope_SHIFT			28
+#define cfg_loopbk_scope_MASK			0x0000000f
+#define cfg_loopbk_scope_WORD			word12
+	uint32_t sge_supp_len;
+	uint32_t word14;
+#define cfg_sgl_page_cnt_SHIFT			0
+#define cfg_sgl_page_cnt_MASK			0x0000000f
+#define cfg_sgl_page_cnt_WORD			word14
+#define cfg_sgl_page_size_SHIFT			8
+#define cfg_sgl_page_size_MASK			0x000000ff
+#define cfg_sgl_page_size_WORD			word14
+#define cfg_sgl_pp_align_SHIFT			16
+#define cfg_sgl_pp_align_MASK			0x000000ff
+#define cfg_sgl_pp_align_WORD			word14
+	uint32_t word15;
+	uint32_t word16;
+	uint32_t word17;
+	uint32_t word18;
+	uint32_t word19;
+};
+
+struct lpfc_mbx_get_sli4_parameters {
+	struct mbox_header header;
+	struct lpfc_sli4_parameters sli4_parameters;
+};
+
 /* Mailbox Completion Queue Error Messages */
 #define MB_CQE_STATUS_SUCCESS 			0x0
 #define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES	0x1
@@ -2103,7 +2192,8 @@ struct lpfc_mqe {
 		struct lpfc_mbx_post_hdr_tmpl hdr_tmpl;
 		struct lpfc_mbx_query_fw_cfg query_fw_cfg;
 		struct lpfc_mbx_supp_pages supp_pages;
-		struct lpfc_mbx_sli4_params sli4_params;
+		struct lpfc_mbx_pc_sli4_params sli4_params;
+		struct lpfc_mbx_get_sli4_parameters get_sli4_parameters;
 		struct lpfc_mbx_nop nop;
 	} un;
 };
@@ -2381,6 +2471,10 @@ struct wqe_common {
 #define wqe_wqes_SHIFT        15
 #define wqe_wqes_MASK         0x00000001
 #define wqe_wqes_WORD         word10
+/* Note that this field overlaps above fields */
+#define wqe_wqid_SHIFT        1
+#define wqe_wqid_MASK         0x0000007f
+#define wqe_wqid_WORD         word10
 #define wqe_pri_SHIFT         16
 #define wqe_pri_MASK          0x00000007
 #define wqe_pri_WORD          word10
@@ -2599,7 +2693,8 @@ struct fcp_iwrite64_wqe {
 	uint32_t total_xfer_len;
 	uint32_t initial_xfer_len;
 	struct wqe_common wqe_com;     /* words 6-11 */
-	uint32_t rsvd_12_15[4];         /* word 12-15 */
+	uint32_t rsrvd12;
+	struct ulp_bde64 ph_bde;       /* words 13-15 */
 };
 
 struct fcp_iread64_wqe {
@@ -2608,7 +2703,8 @@ struct fcp_iread64_wqe {
 	uint32_t total_xfer_len;       /* word 4 */
 	uint32_t rsrvd5;               /* word 5 */
 	struct wqe_common wqe_com;     /* words 6-11 */
-	uint32_t rsvd_12_15[4];         /* word 12-15 */
+	uint32_t rsrvd12;
+	struct ulp_bde64 ph_bde;       /* words 13-15 */
 };
 
 struct fcp_icmnd64_wqe {
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 6d0b36aa3389..35665cfb5689 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -460,7 +460,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
 	    || ((phba->cfg_link_speed == LPFC_USER_LINK_SPEED_16G)
 		&& !(phba->lmt & LMT_16Gb))) {
 		/* Reset link speed to auto */
-		lpfc_printf_log(phba, KERN_WARNING, LOG_LINK_EVENT,
+		lpfc_printf_log(phba, KERN_ERR, LOG_LINK_EVENT,
 			"1302 Invalid speed for this board: "
 			"Reset link speed to auto: x%x\n",
 			phba->cfg_link_speed);
@@ -945,17 +945,13 @@ static void
 lpfc_rrq_timeout(unsigned long ptr)
 {
 	struct lpfc_hba *phba;
-	uint32_t tmo_posted;
 	unsigned long iflag;
 
 	phba = (struct lpfc_hba *)ptr;
 	spin_lock_irqsave(&phba->pport->work_port_lock, iflag);
-	tmo_posted = phba->hba_flag & HBA_RRQ_ACTIVE;
-	if (!tmo_posted)
-		phba->hba_flag |= HBA_RRQ_ACTIVE;
+	phba->hba_flag |= HBA_RRQ_ACTIVE;
 	spin_unlock_irqrestore(&phba->pport->work_port_lock, iflag);
-	if (!tmo_posted)
-		lpfc_worker_wake_up(phba);
+	lpfc_worker_wake_up(phba);
 }
 
 /**
@@ -2280,6 +2276,7 @@ lpfc_cleanup(struct lpfc_vport *vport)
 		/* Wait for any activity on ndlps to settle */
 		msleep(10);
 	}
+	lpfc_cleanup_vports_rrqs(vport, NULL);
 }
 
 /**
@@ -2295,6 +2292,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
 {
 	del_timer_sync(&vport->els_tmofunc);
 	del_timer_sync(&vport->fc_fdmitmo);
+	del_timer_sync(&vport->delayed_disc_tmo);
 	lpfc_can_disctmo(vport);
 	return;
 }
@@ -2355,6 +2353,10 @@ lpfc_stop_hba_timers(struct lpfc_hba *phba)
 	del_timer_sync(&phba->fabric_block_timer);
 	del_timer_sync(&phba->eratt_poll);
 	del_timer_sync(&phba->hb_tmofunc);
+	if (phba->sli_rev == LPFC_SLI_REV4) {
+		del_timer_sync(&phba->rrq_tmr);
+		phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+	}
 	phba->hb_outstanding = 0;
 
 	switch (phba->pci_dev_grp) {
@@ -2732,6 +2734,11 @@ lpfc_create_port(struct lpfc_hba *phba, int instance, struct device *dev)
 	init_timer(&vport->els_tmofunc);
 	vport->els_tmofunc.function = lpfc_els_timeout;
 	vport->els_tmofunc.data = (unsigned long)vport;
+
+	init_timer(&vport->delayed_disc_tmo);
+	vport->delayed_disc_tmo.function = lpfc_delayed_disc_tmo;
+	vport->delayed_disc_tmo.data = (unsigned long)vport;
+
 	error = scsi_add_host_with_dma(shost, dev, &phba->pcidev->dev);
 	if (error)
 		goto out_put_shost;
@@ -4283,36 +4290,37 @@ lpfc_sli4_driver_resource_setup(struct lpfc_hba *phba)
 		goto out_free_bsmbx;
 	}
 
-	/* Get the Supported Pages. It is always available. */
+	/* Get the Supported Pages if PORT_CAPABILITIES is supported by port. */
 	lpfc_supported_pages(mboxq);
 	rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
-	if (unlikely(rc)) {
-		rc = -EIO;
-		mempool_free(mboxq, phba->mbox_mem_pool);
-		goto out_free_bsmbx;
-	}
-
-	mqe = &mboxq->u.mqe;
-	memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
-	       LPFC_MAX_SUPPORTED_PAGES);
-	for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
-		switch (pn_page[i]) {
-		case LPFC_SLI4_PARAMETERS:
-			phba->sli4_hba.pc_sli4_params.supported = 1;
-			break;
-		default:
-			break;
+	if (!rc) {
+		mqe = &mboxq->u.mqe;
+		memcpy(&pn_page[0], ((uint8_t *)&mqe->un.supp_pages.word3),
+		       LPFC_MAX_SUPPORTED_PAGES);
+		for (i = 0; i < LPFC_MAX_SUPPORTED_PAGES; i++) {
+			switch (pn_page[i]) {
+			case LPFC_SLI4_PARAMETERS:
+				phba->sli4_hba.pc_sli4_params.supported = 1;
+				break;
+			default:
+				break;
+			}
+		}
+		/* Read the port's SLI4 Parameters capabilities if supported. */
+		if (phba->sli4_hba.pc_sli4_params.supported)
+			rc = lpfc_pc_sli4_params_get(phba, mboxq);
+		if (rc) {
+			mempool_free(mboxq, phba->mbox_mem_pool);
+			rc = -EIO;
+			goto out_free_bsmbx;
 		}
 	}
-
-	/* Read the port's SLI4 Parameters capabilities if supported. */
-	if (phba->sli4_hba.pc_sli4_params.supported)
-		rc = lpfc_pc_sli4_params_get(phba, mboxq);
+	/*
+	 * Get sli4 parameters that override parameters from Port capabilities.
+	 * If this call fails it is not a critical error so continue loading.
+	 */
+	lpfc_get_sli4_parameters(phba, mboxq);
 	mempool_free(mboxq, phba->mbox_mem_pool);
-	if (rc) {
-		rc = -EIO;
-		goto out_free_bsmbx;
-	}
 	/* Create all the SLI4 queues */
 	rc = lpfc_sli4_queue_create(phba);
 	if (rc)
@@ -7810,7 +7818,7 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 	mqe = &mboxq->u.mqe;
 
 	/* Read the port's SLI4 Parameters port capabilities */
-	lpfc_sli4_params(mboxq);
+	lpfc_pc_sli4_params(mboxq);
 	if (!phba->sli4_hba.intr_enable)
 		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
 	else {
@@ -7854,6 +7862,66 @@ lpfc_pc_sli4_params_get(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
 }
 
 /**
+ * lpfc_get_sli4_parameters - Get the SLI4 Config PARAMETERS.
+ * @phba: Pointer to HBA context object.
+ * @mboxq: Pointer to the mailboxq memory for the mailbox command response.
+ *
+ * This function is called in the SLI4 code path to read the port's
+ * sli4 capabilities.
+ *
+ * This function may be be called from any context that can block-wait
+ * for the completion.  The expectation is that this routine is called
+ * typically from probe_one or from the online routine.
+ **/
+int
+lpfc_get_sli4_parameters(struct lpfc_hba *phba, LPFC_MBOXQ_t *mboxq)
+{
+	int rc;
+	struct lpfc_mqe *mqe = &mboxq->u.mqe;
+	struct lpfc_pc_sli4_params *sli4_params;
+	int length;
+	struct lpfc_sli4_parameters *mbx_sli4_parameters;
+
+	/* Read the port's SLI4 Config Parameters */
+	length = (sizeof(struct lpfc_mbx_get_sli4_parameters) -
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
+	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+			 LPFC_MBOX_OPCODE_GET_SLI4_PARAMETERS,
+			 length, LPFC_SLI4_MBX_EMBED);
+	if (!phba->sli4_hba.intr_enable)
+		rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+	else
+		rc = lpfc_sli_issue_mbox_wait(phba, mboxq,
+			lpfc_mbox_tmo_val(phba, MBX_SLI4_CONFIG));
+	if (unlikely(rc))
+		return rc;
+	sli4_params = &phba->sli4_hba.pc_sli4_params;
+	mbx_sli4_parameters = &mqe->un.get_sli4_parameters.sli4_parameters;
+	sli4_params->if_type = bf_get(cfg_if_type, mbx_sli4_parameters);
+	sli4_params->sli_rev = bf_get(cfg_sli_rev, mbx_sli4_parameters);
+	sli4_params->sli_family = bf_get(cfg_sli_family, mbx_sli4_parameters);
+	sli4_params->featurelevel_1 = bf_get(cfg_sli_hint_1,
+					     mbx_sli4_parameters);
+	sli4_params->featurelevel_2 = bf_get(cfg_sli_hint_2,
+					     mbx_sli4_parameters);
+	if (bf_get(cfg_phwq, mbx_sli4_parameters))
+		phba->sli3_options |= LPFC_SLI4_PHWQ_ENABLED;
+	else
+		phba->sli3_options &= ~LPFC_SLI4_PHWQ_ENABLED;
+	sli4_params->sge_supp_len = mbx_sli4_parameters->sge_supp_len;
+	sli4_params->loopbk_scope = bf_get(loopbk_scope, mbx_sli4_parameters);
+	sli4_params->cqv = bf_get(cfg_cqv, mbx_sli4_parameters);
+	sli4_params->mqv = bf_get(cfg_mqv, mbx_sli4_parameters);
+	sli4_params->wqv = bf_get(cfg_wqv, mbx_sli4_parameters);
+	sli4_params->rqv = bf_get(cfg_rqv, mbx_sli4_parameters);
+	sli4_params->sgl_pages_max = bf_get(cfg_sgl_page_cnt,
+					    mbx_sli4_parameters);
+	sli4_params->sgl_pp_align = bf_get(cfg_sgl_pp_align,
+					   mbx_sli4_parameters);
+	return 0;
+}
+
+/**
  * lpfc_pci_probe_one_s3 - PCI probe func to reg SLI-3 device to PCI subsystem.
  * @pdev: pointer to PCI device
  * @pid: pointer to PCI device identifier
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 23403c650207..dba32dfdb59b 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -1263,7 +1263,8 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
 	if (phba->sli_rev == LPFC_SLI_REV3 && phba->vpd.sli3Feat.cerbm) {
 		if (phba->cfg_enable_bg)
 			mb->un.varCfgPort.cbg = 1; /* configure BlockGuard */
-		mb->un.varCfgPort.cdss = 1; /* Configure Security */
+		if (phba->cfg_enable_dss)
+			mb->un.varCfgPort.cdss = 1; /* Configure Security */
 		mb->un.varCfgPort.cerbm = 1; /* Request HBQs */
 		mb->un.varCfgPort.ccrp = 1; /* Command Ring Polling */
 		mb->un.varCfgPort.max_hbq = lpfc_sli_hbq_count();
@@ -1692,7 +1693,7 @@ lpfc_sli4_mbox_cmd_free(struct lpfc_hba *phba, struct lpfcMboxq *mbox)
  * @mbox: pointer to lpfc mbox command.
  * @subsystem: The sli4 config sub mailbox subsystem.
  * @opcode: The sli4 config sub mailbox command opcode.
- * @length: Length of the sli4 config mailbox command.
+ * @length: Length of the sli4 config mailbox command (including sub-header).
  *
  * This routine sets up the header fields of SLI4 specific mailbox command
  * for sending IOCTL command.
@@ -1723,14 +1724,14 @@ lpfc_sli4_config(struct lpfc_hba *phba, struct lpfcMboxq *mbox,
 	if (emb) {
 		/* Set up main header fields */
 		bf_set(lpfc_mbox_hdr_emb, &sli4_config->header.cfg_mhdr, 1);
-		sli4_config->header.cfg_mhdr.payload_length =
-					LPFC_MBX_CMD_HDR_LENGTH + length;
+		sli4_config->header.cfg_mhdr.payload_length = length;
 		/* Set up sub-header fields following main header */
 		bf_set(lpfc_mbox_hdr_opcode,
 			&sli4_config->header.cfg_shdr.request, opcode);
 		bf_set(lpfc_mbox_hdr_subsystem,
 			&sli4_config->header.cfg_shdr.request, subsystem);
-		sli4_config->header.cfg_shdr.request.request_length = length;
+		sli4_config->header.cfg_shdr.request.request_length =
+			length - LPFC_MBX_CMD_HDR_LENGTH;
 		return length;
 	}
 
@@ -1902,6 +1903,7 @@ lpfc_request_features(struct lpfc_hba *phba, struct lpfcMboxq *mboxq)
 
 	/* Set up host requested features. */
 	bf_set(lpfc_mbx_rq_ftr_rq_fcpi, &mboxq->u.mqe.un.req_ftrs, 1);
+	bf_set(lpfc_mbx_rq_ftr_rq_perfh, &mboxq->u.mqe.un.req_ftrs, 1);
 
 	/* Enable DIF (block guard) only if configured to do so. */
 	if (phba->cfg_enable_bg)
@@ -2159,17 +2161,16 @@ lpfc_supported_pages(struct lpfcMboxq *mbox)
 }
 
 /**
- * lpfc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params
- *                    mailbox command.
+ * lpfc_pc_sli4_params - Initialize the PORT_CAPABILITIES SLI4 Params mbox cmd.
  * @mbox: pointer to lpfc mbox command to initialize.
  *
  * The PORT_CAPABILITIES SLI4 parameters mailbox command is issued to
  * retrieve the particular SLI4 features supported by the port.
  **/
 void
-lpfc_sli4_params(struct lpfcMboxq *mbox)
+lpfc_pc_sli4_params(struct lpfcMboxq *mbox)
 {
-	struct lpfc_mbx_sli4_params *sli4_params;
+	struct lpfc_mbx_pc_sli4_params *sli4_params;
 
 	memset(mbox, 0, sizeof(*mbox));
 	sli4_params = &mbox->u.mqe.un.sli4_params;
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index d85a7423a694..52b35159fc35 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -350,7 +350,11 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	ndlp->nlp_maxframe =
 		((sp->cmn.bbRcvSizeMsb & 0x0F) << 8) | sp->cmn.bbRcvSizeLsb;
 
-	/* no need to reg_login if we are already in one of these states */
+	/*
+	 * Need to unreg_login if we are already in one of these states and
+	 * change to NPR state. This will block the port until after the ACC
+	 * completes and the reg_login is issued and completed.
+	 */
 	switch (ndlp->nlp_state) {
 	case  NLP_STE_NPR_NODE:
 		if (!(ndlp->nlp_flag & NLP_NPR_ADISC))
@@ -359,8 +363,9 @@ lpfc_rcv_plogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
 	case  NLP_STE_PRLI_ISSUE:
 	case  NLP_STE_UNMAPPED_NODE:
 	case  NLP_STE_MAPPED_NODE:
-		lpfc_els_rsp_acc(vport, ELS_CMD_PLOGI, cmdiocb, ndlp, NULL);
-		return 1;
+		lpfc_unreg_rpi(vport, ndlp);
+		ndlp->nlp_prev_state = ndlp->nlp_state;
+		lpfc_nlp_set_state(vport, ndlp, NLP_STE_NPR_NODE);
 	}
 
 	if ((vport->fc_flag & FC_PT2PT) &&
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index c97751c95d77..bf34178b80bf 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -609,6 +609,32 @@ lpfc_new_scsi_buf_s3(struct lpfc_vport *vport, int num_to_alloc)
 }
 
 /**
+ * lpfc_sli4_vport_delete_fcp_xri_aborted -Remove all ndlp references for vport
+ * @vport: pointer to lpfc vport data structure.
+ *
+ * This routine is invoked by the vport cleanup for deletions and the cleanup
+ * for an ndlp on removal.
+ **/
+void
+lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *vport)
+{
+	struct lpfc_hba *phba = vport->phba;
+	struct lpfc_scsi_buf *psb, *next_psb;
+	unsigned long iflag = 0;
+
+	spin_lock_irqsave(&phba->hbalock, iflag);
+	spin_lock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	list_for_each_entry_safe(psb, next_psb,
+				&phba->sli4_hba.lpfc_abts_scsi_buf_list, list) {
+		if (psb->rdata && psb->rdata->pnode
+			&& psb->rdata->pnode->vport == vport)
+			psb->rdata = NULL;
+	}
+	spin_unlock(&phba->sli4_hba.abts_scsi_buf_list_lock);
+	spin_unlock_irqrestore(&phba->hbalock, iflag);
+}
+
+/**
  * lpfc_sli4_fcp_xri_aborted - Fast-path process of fcp xri abort
  * @phba: pointer to lpfc hba data structure.
  * @axri: pointer to the fcp xri abort wcqe structure.
@@ -640,7 +666,11 @@ lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *phba,
 			psb->status = IOSTAT_SUCCESS;
 			spin_unlock(
 				&phba->sli4_hba.abts_scsi_buf_list_lock);
-			ndlp = psb->rdata->pnode;
+			if (psb->rdata && psb->rdata->pnode)
+				ndlp = psb->rdata->pnode;
+			else
+				ndlp = NULL;
+
 			rrq_empty = list_empty(&phba->active_rrq_list);
 			spin_unlock_irqrestore(&phba->hbalock, iflag);
 			if (ndlp)
@@ -964,36 +994,29 @@ lpfc_get_scsi_buf_s3(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 static struct lpfc_scsi_buf*
 lpfc_get_scsi_buf_s4(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
 {
-	struct  lpfc_scsi_buf *lpfc_cmd = NULL;
-	struct  lpfc_scsi_buf *start_lpfc_cmd = NULL;
-	struct list_head *scsi_buf_list = &phba->lpfc_scsi_buf_list;
+	struct lpfc_scsi_buf *lpfc_cmd ;
 	unsigned long iflag = 0;
 	int found = 0;
 
 	spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
-	list_remove_head(scsi_buf_list, lpfc_cmd, struct lpfc_scsi_buf, list);
-	spin_unlock_irqrestore(&phba->scsi_buf_list_lock, iflag);
-	while (!found && lpfc_cmd) {
+	list_for_each_entry(lpfc_cmd, &phba->lpfc_scsi_buf_list,
+							list) {
 		if (lpfc_test_rrq_active(phba, ndlp,
-					 lpfc_cmd->cur_iocbq.sli4_xritag)) {
-			lpfc_release_scsi_buf_s4(phba, lpfc_cmd);
-			spin_lock_irqsave(&phba->scsi_buf_list_lock, iflag);
-			list_remove_head(scsi_buf_list, lpfc_cmd,
-					 struct lpfc_scsi_buf, list);
-			spin_unlock_irqrestore(&phba->scsi_buf_list_lock,
-						 iflag);
-			if (lpfc_cmd == start_lpfc_cmd) {
-				lpfc_cmd = NULL;
-				break;
-			} else
-				continue;
-		}
+					 lpfc_cmd->cur_iocbq.sli4_xritag))
+			continue;
+		list_del(&lpfc_cmd->list);
 		found = 1;
 		lpfc_cmd->seg_cnt = 0;
 		lpfc_cmd->nonsg_phys = 0;
 		lpfc_cmd->prot_seg_cnt = 0;
+		break;
 	}
-	return  lpfc_cmd;
+	spin_unlock_irqrestore(&phba->scsi_buf_list_lock,
+						 iflag);
+	if (!found)
+		return NULL;
+	else
+		return  lpfc_cmd;
 }
 /**
  * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list of the HBA
@@ -1981,12 +2004,14 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 	struct scatterlist *sgel = NULL;
 	struct fcp_cmnd *fcp_cmnd = lpfc_cmd->fcp_cmnd;
 	struct sli4_sge *sgl = (struct sli4_sge *)lpfc_cmd->fcp_bpl;
+	struct sli4_sge *first_data_sgl;
 	IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
 	dma_addr_t physaddr;
 	uint32_t num_bde = 0;
 	uint32_t dma_len;
 	uint32_t dma_offset = 0;
 	int nseg;
+	struct ulp_bde64 *bde;
 
 	/*
 	 * There are three possibilities here - use scatter-gather segment, use
@@ -2011,7 +2036,7 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 		bf_set(lpfc_sli4_sge_last, sgl, 0);
 		sgl->word2 = cpu_to_le32(sgl->word2);
 		sgl += 1;
-
+		first_data_sgl = sgl;
 		lpfc_cmd->seg_cnt = nseg;
 		if (lpfc_cmd->seg_cnt > phba->cfg_sg_seg_cnt) {
 			lpfc_printf_log(phba, KERN_ERR, LOG_BG, "9074 BLKGRD:"
@@ -2047,6 +2072,17 @@ lpfc_scsi_prep_dma_buf_s4(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
 			dma_offset += dma_len;
 			sgl++;
 		}
+		/* setup the performance hint (first data BDE) if enabled */
+		if (phba->sli3_options & LPFC_SLI4_PERFH_ENABLED) {
+			bde = (struct ulp_bde64 *)
+					&(iocb_cmd->unsli3.sli3Words[5]);
+			bde->addrLow = first_data_sgl->addr_lo;
+			bde->addrHigh = first_data_sgl->addr_hi;
+			bde->tus.f.bdeSize =
+					le32_to_cpu(first_data_sgl->sge_len);
+			bde->tus.f.bdeFlags = BUFF_TYPE_BDE_64;
+			bde->tus.w = cpu_to_le32(bde->tus.w);
+		}
 	} else {
 		sgl += 1;
 		/* clear the last flag in the fcp_rsp map entry */
@@ -2471,6 +2507,16 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 			lpfc_worker_wake_up(phba);
 			break;
 		case IOSTAT_LOCAL_REJECT:
+		case IOSTAT_REMOTE_STOP:
+			if (lpfc_cmd->result == IOERR_ELXSEC_KEY_UNWRAP_ERROR ||
+			    lpfc_cmd->result ==
+					IOERR_ELXSEC_KEY_UNWRAP_COMPARE_ERROR ||
+			    lpfc_cmd->result == IOERR_ELXSEC_CRYPTO_ERROR ||
+			    lpfc_cmd->result ==
+					IOERR_ELXSEC_CRYPTO_COMPARE_ERROR) {
+				cmd->result = ScsiResult(DID_NO_CONNECT, 0);
+				break;
+			}
 			if (lpfc_cmd->result == IOERR_INVALID_RPI ||
 			    lpfc_cmd->result == IOERR_NO_RESOURCES ||
 			    lpfc_cmd->result == IOERR_ABORT_REQUESTED ||
@@ -2478,7 +2524,6 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 				cmd->result = ScsiResult(DID_REQUEUE, 0);
 				break;
 			}
-
 			if ((lpfc_cmd->result == IOERR_RX_DMA_FAILED ||
 			     lpfc_cmd->result == IOERR_TX_DMA_FAILED) &&
 			     pIocbOut->iocb.unsli3.sli3_bg.bgstat) {
@@ -2497,7 +2542,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 							"on unprotected cmd\n");
 				}
 			}
-
+			if ((lpfc_cmd->status == IOSTAT_REMOTE_STOP)
+				&& (phba->sli_rev == LPFC_SLI_REV4)
+				&& (pnode && NLP_CHK_NODE_ACT(pnode))) {
+				/* This IO was aborted by the target, we don't
+				 * know the rxid and because we did not send the
+				 * ABTS we cannot generate and RRQ.
+				 */
+				lpfc_set_rrq_active(phba, pnode,
+						lpfc_cmd->cur_iocbq.sli4_xritag,
+						0, 0);
+			}
 		/* else: fall through */
 		default:
 			cmd->result = ScsiResult(DID_ERROR, 0);
@@ -2508,9 +2563,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
 		    || (pnode->nlp_state != NLP_STE_MAPPED_NODE))
 			cmd->result = ScsiResult(DID_TRANSPORT_DISRUPTED,
 						 SAM_STAT_BUSY);
-	} else {
+	} else
 		cmd->result = ScsiResult(DID_OK, 0);
-	}
 
 	if (cmd->result || lpfc_cmd->fcp_rsp->rspSnsLen) {
 		uint32_t *lp = (uint32_t *)cmd->sense_buffer;
@@ -3004,11 +3058,11 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
 	 * transport is still transitioning.
 	 */
 	if (!ndlp || !NLP_CHK_NODE_ACT(ndlp)) {
-		cmnd->result = ScsiResult(DID_TRANSPORT_DISRUPTED, 0);
+		cmnd->result = ScsiResult(DID_IMM_RETRY, 0);
 		goto out_fail_command;
 	}
 	if (atomic_read(&ndlp->cmd_pending) >= ndlp->cmd_qdepth)
-		goto out_host_busy;
+		goto out_tgt_busy;
 
 	lpfc_cmd = lpfc_get_scsi_buf(phba, ndlp);
 	if (lpfc_cmd == NULL) {
@@ -3125,6 +3179,9 @@ lpfc_queuecommand_lck(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
  out_host_busy:
 	return SCSI_MLQUEUE_HOST_BUSY;
 
+ out_tgt_busy:
+	return SCSI_MLQUEUE_TARGET_BUSY;
+
  out_fail_command:
 	done(cmnd);
 	return 0;
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a359d2b873ce..2ee0374a9908 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -96,7 +96,8 @@ lpfc_sli4_wq_put(struct lpfc_queue *q, union lpfc_wqe *wqe)
 	/* set consumption flag every once in a while */
 	if (!((q->host_index + 1) % LPFC_RELEASE_NOTIFICATION_INTERVAL))
 		bf_set(wqe_wqec, &wqe->generic.wqe_com, 1);
-
+	if (q->phba->sli3_options & LPFC_SLI4_PHWQ_ENABLED)
+		bf_set(wqe_wqid, &wqe->generic.wqe_com, q->queue_id);
 	lpfc_sli_pcimem_bcopy(wqe, temp_wqe, q->entry_size);
 
 	/* Update the host index before invoking device */
@@ -534,15 +535,35 @@ __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 	uint16_t adj_xri;
 	struct lpfc_node_rrq *rrq;
 	int empty;
+	uint32_t did = 0;
+
+
+	if (!ndlp)
+		return -EINVAL;
+
+	if (!phba->cfg_enable_rrq)
+		return -EINVAL;
+
+	if (phba->pport->load_flag & FC_UNLOADING) {
+		phba->hba_flag &= ~HBA_RRQ_ACTIVE;
+		goto out;
+	}
+	did = ndlp->nlp_DID;
 
 	/*
 	 * set the active bit even if there is no mem available.
 	 */
 	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
-	if (!ndlp)
-		return -EINVAL;
+
+	if (NLP_CHK_FREE_REQ(ndlp))
+		goto out;
+
+	if (ndlp->vport && (ndlp->vport->load_flag & FC_UNLOADING))
+		goto out;
+
 	if (test_and_set_bit(adj_xri, ndlp->active_rrqs.xri_bitmap))
-		return -EINVAL;
+		goto out;
+
 	rrq = mempool_alloc(phba->rrq_pool, GFP_KERNEL);
 	if (rrq) {
 		rrq->send_rrq = send_rrq;
@@ -553,14 +574,7 @@ __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 		rrq->vport = ndlp->vport;
 		rrq->rxid = rxid;
 		empty = list_empty(&phba->active_rrq_list);
-		if (phba->cfg_enable_rrq && send_rrq)
-			/*
-			 * We need the xri before we can add this to the
-			 * phba active rrq list.
-			 */
-			rrq->send_rrq = send_rrq;
-		else
-			rrq->send_rrq = 0;
+		rrq->send_rrq = send_rrq;
 		list_add_tail(&rrq->list, &phba->active_rrq_list);
 		if (!(phba->hba_flag & HBA_RRQ_ACTIVE)) {
 			phba->hba_flag |= HBA_RRQ_ACTIVE;
@@ -569,40 +583,49 @@ __lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 		}
 		return 0;
 	}
-	return -ENOMEM;
+out:
+	lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+			"2921 Can't set rrq active xri:0x%x rxid:0x%x"
+			" DID:0x%x Send:%d\n",
+			xritag, rxid, did, send_rrq);
+	return -EINVAL;
 }
 
 /**
- * __lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
+ * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
  * @phba: Pointer to HBA context object.
  * @xritag: xri used in this exchange.
  * @rrq: The RRQ to be cleared.
  *
- * This function is called with hbalock held. This function
  **/
-static void
-__lpfc_clr_rrq_active(struct lpfc_hba *phba,
-			uint16_t xritag,
-			struct lpfc_node_rrq *rrq)
+void
+lpfc_clr_rrq_active(struct lpfc_hba *phba,
+		    uint16_t xritag,
+		    struct lpfc_node_rrq *rrq)
 {
 	uint16_t adj_xri;
-	struct lpfc_nodelist *ndlp;
+	struct lpfc_nodelist *ndlp = NULL;
 
-	ndlp = lpfc_findnode_did(rrq->vport, rrq->nlp_DID);
+	if ((rrq->vport) && NLP_CHK_NODE_ACT(rrq->ndlp))
+		ndlp = lpfc_findnode_did(rrq->vport, rrq->nlp_DID);
 
 	/* The target DID could have been swapped (cable swap)
 	 * we should use the ndlp from the findnode if it is
 	 * available.
 	 */
-	if (!ndlp)
+	if ((!ndlp) && rrq->ndlp)
 		ndlp = rrq->ndlp;
 
+	if (!ndlp)
+		goto out;
+
 	adj_xri = xritag - phba->sli4_hba.max_cfg_param.xri_base;
 	if (test_and_clear_bit(adj_xri, ndlp->active_rrqs.xri_bitmap)) {
 		rrq->send_rrq = 0;
 		rrq->xritag = 0;
 		rrq->rrq_stop_time = 0;
 	}
+out:
 	mempool_free(rrq, phba->rrq_pool);
 }
 
@@ -627,34 +650,34 @@ lpfc_handle_rrq_active(struct lpfc_hba *phba)
 	struct lpfc_node_rrq *nextrrq;
 	unsigned long next_time;
 	unsigned long iflags;
+	LIST_HEAD(send_rrq);
 
 	spin_lock_irqsave(&phba->hbalock, iflags);
 	phba->hba_flag &= ~HBA_RRQ_ACTIVE;
 	next_time = jiffies + HZ * (phba->fc_ratov + 1);
 	list_for_each_entry_safe(rrq, nextrrq,
-			&phba->active_rrq_list, list) {
-		if (time_after(jiffies, rrq->rrq_stop_time)) {
-			list_del(&rrq->list);
-			if (!rrq->send_rrq)
-				/* this call will free the rrq */
-				__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
-			else {
-			/* if we send the rrq then the completion handler
-			 *  will clear the bit in the xribitmap.
-			 */
-				spin_unlock_irqrestore(&phba->hbalock, iflags);
-				if (lpfc_send_rrq(phba, rrq)) {
-					lpfc_clr_rrq_active(phba, rrq->xritag,
-								 rrq);
-				}
-				spin_lock_irqsave(&phba->hbalock, iflags);
-			}
-		} else if  (time_before(rrq->rrq_stop_time, next_time))
+				 &phba->active_rrq_list, list) {
+		if (time_after(jiffies, rrq->rrq_stop_time))
+			list_move(&rrq->list, &send_rrq);
+		else if (time_before(rrq->rrq_stop_time, next_time))
 			next_time = rrq->rrq_stop_time;
 	}
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	if (!list_empty(&phba->active_rrq_list))
 		mod_timer(&phba->rrq_tmr, next_time);
+	list_for_each_entry_safe(rrq, nextrrq, &send_rrq, list) {
+		list_del(&rrq->list);
+		if (!rrq->send_rrq)
+			/* this call will free the rrq */
+		lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+		else if (lpfc_send_rrq(phba, rrq)) {
+			/* if we send the rrq then the completion handler
+			*  will clear the bit in the xribitmap.
+			*/
+			lpfc_clr_rrq_active(phba, rrq->xritag,
+					    rrq);
+		}
+	}
 }
 
 /**
@@ -692,29 +715,37 @@ lpfc_get_active_rrq(struct lpfc_vport *vport, uint16_t xri, uint32_t did)
 /**
  * lpfc_cleanup_vports_rrqs - Remove and clear the active RRQ for this vport.
  * @vport: Pointer to vport context object.
- *
- * Remove all active RRQs for this vport from the phba->active_rrq_list and
- * clear the rrq.
+ * @ndlp: Pointer to the lpfc_node_list structure.
+ * If ndlp is NULL Remove all active RRQs for this vport from the
+ * phba->active_rrq_list and clear the rrq.
+ * If ndlp is not NULL then only remove rrqs for this vport & this ndlp.
  **/
 void
-lpfc_cleanup_vports_rrqs(struct lpfc_vport *vport)
+lpfc_cleanup_vports_rrqs(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
 
 {
 	struct lpfc_hba *phba = vport->phba;
 	struct lpfc_node_rrq *rrq;
 	struct lpfc_node_rrq *nextrrq;
 	unsigned long iflags;
+	LIST_HEAD(rrq_list);
 
 	if (phba->sli_rev != LPFC_SLI_REV4)
 		return;
-	spin_lock_irqsave(&phba->hbalock, iflags);
-	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
-		if (rrq->vport == vport) {
-			list_del(&rrq->list);
-			__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
-		}
+	if (!ndlp) {
+		lpfc_sli4_vport_delete_els_xri_aborted(vport);
+		lpfc_sli4_vport_delete_fcp_xri_aborted(vport);
 	}
+	spin_lock_irqsave(&phba->hbalock, iflags);
+	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list)
+		if ((rrq->vport == vport) && (!ndlp  || rrq->ndlp == ndlp))
+			list_move(&rrq->list, &rrq_list);
 	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	list_for_each_entry_safe(rrq, nextrrq, &rrq_list, list) {
+		list_del(&rrq->list);
+		lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+	}
 }
 
 /**
@@ -732,24 +763,27 @@ lpfc_cleanup_wt_rrqs(struct lpfc_hba *phba)
 	struct lpfc_node_rrq *nextrrq;
 	unsigned long next_time;
 	unsigned long iflags;
+	LIST_HEAD(rrq_list);
 
 	if (phba->sli_rev != LPFC_SLI_REV4)
 		return;
 	spin_lock_irqsave(&phba->hbalock, iflags);
 	phba->hba_flag &= ~HBA_RRQ_ACTIVE;
 	next_time = jiffies + HZ * (phba->fc_ratov * 2);
-	list_for_each_entry_safe(rrq, nextrrq, &phba->active_rrq_list, list) {
+	list_splice_init(&phba->active_rrq_list, &rrq_list);
+	spin_unlock_irqrestore(&phba->hbalock, iflags);
+
+	list_for_each_entry_safe(rrq, nextrrq, &rrq_list, list) {
 		list_del(&rrq->list);
-		__lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
+		lpfc_clr_rrq_active(phba, rrq->xritag, rrq);
 	}
-	spin_unlock_irqrestore(&phba->hbalock, iflags);
 	if (!list_empty(&phba->active_rrq_list))
 		mod_timer(&phba->rrq_tmr, next_time);
 }
 
 
 /**
- * __lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
+ * lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
  * @phba: Pointer to HBA context object.
  * @ndlp: Targets nodelist pointer for this exchange.
  * @xritag the xri in the bitmap to test.
@@ -758,8 +792,8 @@ lpfc_cleanup_wt_rrqs(struct lpfc_hba *phba)
  * returns 0 = rrq not active for this xri
  *         1 = rrq is valid for this xri.
  **/
-static int
-__lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
+int
+lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 			uint16_t  xritag)
 {
 	uint16_t adj_xri;
@@ -802,52 +836,6 @@ lpfc_set_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
 }
 
 /**
- * lpfc_clr_rrq_active - Clears RRQ active bit in xri_bitmap.
- * @phba: Pointer to HBA context object.
- * @xritag: xri used in this exchange.
- * @rrq: The RRQ to be cleared.
- *
- * This function is takes the hbalock.
- **/
-void
-lpfc_clr_rrq_active(struct lpfc_hba *phba,
-			uint16_t xritag,
-			struct lpfc_node_rrq *rrq)
-{
-	unsigned long iflags;
-
-	spin_lock_irqsave(&phba->hbalock, iflags);
-	__lpfc_clr_rrq_active(phba, xritag, rrq);
-	spin_unlock_irqrestore(&phba->hbalock, iflags);
-	return;
-}
-
-
-
-/**
- * lpfc_test_rrq_active - Test RRQ bit in xri_bitmap.
- * @phba: Pointer to HBA context object.
- * @ndlp: Targets nodelist pointer for this exchange.
- * @xritag the xri in the bitmap to test.
- *
- * This function takes the hbalock.
- * returns 0 = rrq not active for this xri
- *         1 = rrq is valid for this xri.
- **/
-int
-lpfc_test_rrq_active(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp,
-			uint16_t  xritag)
-{
-	int ret;
-	unsigned long iflags;
-
-	spin_lock_irqsave(&phba->hbalock, iflags);
-	ret = __lpfc_test_rrq_active(phba, ndlp, xritag);
-	spin_unlock_irqrestore(&phba->hbalock, iflags);
-	return ret;
-}
-
-/**
  * __lpfc_sli_get_sglq - Allocates an iocb object from sgl pool
  * @phba: Pointer to HBA context object.
  * @piocb: Pointer to the iocbq.
@@ -884,7 +872,7 @@ __lpfc_sli_get_sglq(struct lpfc_hba *phba, struct lpfc_iocbq *piocbq)
 			return NULL;
 		adj_xri = sglq->sli4_xritag -
 				phba->sli4_hba.max_cfg_param.xri_base;
-		if (__lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) {
+		if (lpfc_test_rrq_active(phba, ndlp, sglq->sli4_xritag)) {
 			/* This xri has an rrq outstanding for this DID.
 			 * put it back in the list and get another xri.
 			 */
@@ -969,7 +957,8 @@ __lpfc_sli_release_iocbq_s4(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
 		} else {
 			sglq->state = SGL_FREED;
 			sglq->ndlp = NULL;
-			list_add(&sglq->list, &phba->sli4_hba.lpfc_sgl_list);
+			list_add_tail(&sglq->list,
+				&phba->sli4_hba.lpfc_sgl_list);
 
 			/* Check if TXQ queue needs to be serviced */
 			if (pring->txq_cnt)
@@ -4817,7 +4806,10 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 				"0378 No support for fcpi mode.\n");
 		ftr_rsp++;
 	}
-
+	if (bf_get(lpfc_mbx_rq_ftr_rsp_perfh, &mqe->un.req_ftrs))
+		phba->sli3_options |= LPFC_SLI4_PERFH_ENABLED;
+	else
+		phba->sli3_options &= ~LPFC_SLI4_PERFH_ENABLED;
 	/*
 	 * If the port cannot support the host's requested features
 	 * then turn off the global config parameters to disable the
@@ -5004,7 +4996,8 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phba)
 	spin_lock_irq(&phba->hbalock);
 	phba->link_state = LPFC_LINK_DOWN;
 	spin_unlock_irq(&phba->hbalock);
-	rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
+	if (phba->cfg_suppress_link_up == LPFC_INITIALIZE_LINK)
+		rc = phba->lpfc_hba_init_link(phba, MBX_NOWAIT);
 out_unset_queue:
 	/* Unset all the queues set up in this routine when error out */
 	if (rc)
@@ -10478,6 +10471,7 @@ lpfc_cq_create(struct lpfc_hba *phba, struct lpfc_queue *cq,
 	cq->type = type;
 	cq->subtype = subtype;
 	cq->queue_id = bf_get(lpfc_mbx_cq_create_q_id, &cq_create->u.response);
+	cq->assoc_qid = eq->queue_id;
 	cq->host_index = 0;
 	cq->hba_index = 0;
 
@@ -10672,6 +10666,7 @@ lpfc_mq_create(struct lpfc_hba *phba, struct lpfc_queue *mq,
 		goto out;
 	}
 	mq->type = LPFC_MQ;
+	mq->assoc_qid = cq->queue_id;
 	mq->subtype = subtype;
 	mq->host_index = 0;
 	mq->hba_index = 0;
@@ -10759,6 +10754,7 @@ lpfc_wq_create(struct lpfc_hba *phba, struct lpfc_queue *wq,
 		goto out;
 	}
 	wq->type = LPFC_WQ;
+	wq->assoc_qid = cq->queue_id;
 	wq->subtype = subtype;
 	wq->host_index = 0;
 	wq->hba_index = 0;
@@ -10876,6 +10872,7 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 		goto out;
 	}
 	hrq->type = LPFC_HRQ;
+	hrq->assoc_qid = cq->queue_id;
 	hrq->subtype = subtype;
 	hrq->host_index = 0;
 	hrq->hba_index = 0;
@@ -10936,6 +10933,7 @@ lpfc_rq_create(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 		goto out;
 	}
 	drq->type = LPFC_DRQ;
+	drq->assoc_qid = cq->queue_id;
 	drq->subtype = subtype;
 	drq->host_index = 0;
 	drq->hba_index = 0;
@@ -11189,7 +11187,7 @@ lpfc_rq_destroy(struct lpfc_hba *phba, struct lpfc_queue *hrq,
 	if (!mbox)
 		return -ENOMEM;
 	length = (sizeof(struct lpfc_mbx_rq_destroy) -
-		  sizeof(struct mbox_header));
+		  sizeof(struct lpfc_sli4_cfg_mhdr));
 	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
 			 LPFC_MBOX_OPCODE_FCOE_RQ_DESTROY,
 			 length, LPFC_SLI4_MBX_EMBED);
@@ -11279,7 +11277,7 @@ lpfc_sli4_post_sgl(struct lpfc_hba *phba,
 	lpfc_sli4_config(phba, mbox, LPFC_MBOX_SUBSYSTEM_FCOE,
 			LPFC_MBOX_OPCODE_FCOE_POST_SGL_PAGES,
 			sizeof(struct lpfc_mbx_post_sgl_pages) -
-			sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+			sizeof(struct lpfc_sli4_cfg_mhdr), LPFC_SLI4_MBX_EMBED);
 
 	post_sgl_pages = (struct lpfc_mbx_post_sgl_pages *)
 				&mbox->u.mqe.un.post_sgl_pages;
@@ -12402,7 +12400,8 @@ lpfc_sli4_post_rpi_hdr(struct lpfc_hba *phba, struct lpfc_rpi_hdr *rpi_page)
 	lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_FCOE,
 			 LPFC_MBOX_OPCODE_FCOE_POST_HDR_TEMPLATE,
 			 sizeof(struct lpfc_mbx_post_hdr_tmpl) -
-			 sizeof(struct mbox_header), LPFC_SLI4_MBX_EMBED);
+			 sizeof(struct lpfc_sli4_cfg_mhdr),
+			 LPFC_SLI4_MBX_EMBED);
 	bf_set(lpfc_mbx_post_hdr_tmpl_page_cnt,
 	       hdr_tmpl, rpi_page->page_count);
 	bf_set(lpfc_mbx_post_hdr_tmpl_rpi_offset, hdr_tmpl,
diff --git a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
index c7217d579e0f..595056b89608 100644
--- a/drivers/scsi/lpfc/lpfc_sli4.h
+++ b/drivers/scsi/lpfc/lpfc_sli4.h
@@ -125,9 +125,9 @@ struct lpfc_queue {
 	uint32_t entry_count;	/* Number of entries to support on the queue */
 	uint32_t entry_size;	/* Size of each queue entry. */
 	uint32_t queue_id;	/* Queue ID assigned by the hardware */
+	uint32_t assoc_qid;     /* Queue ID associated with, for CQ/WQ/MQ */
 	struct list_head page_list;
 	uint32_t page_count;	/* Number of pages allocated for this queue */
-
 	uint32_t host_index;	/* The host's index for putting or getting */
 	uint32_t hba_index;	/* The last known hba index for get or put */
 	union sli4_qe qe[1];	/* array to index entries (must be last) */
@@ -359,6 +359,10 @@ struct lpfc_pc_sli4_params {
 	uint32_t hdr_pp_align;
 	uint32_t sgl_pages_max;
 	uint32_t sgl_pp_align;
+	uint8_t cqv;
+	uint8_t mqv;
+	uint8_t wqv;
+	uint8_t rqv;
 };
 
 /* SLI4 HBA data structure entries */
@@ -562,6 +566,8 @@ void lpfc_sli4_fcp_xri_aborted(struct lpfc_hba *,
 			       struct sli4_wcqe_xri_aborted *);
 void lpfc_sli4_els_xri_aborted(struct lpfc_hba *,
 			       struct sli4_wcqe_xri_aborted *);
+void lpfc_sli4_vport_delete_els_xri_aborted(struct lpfc_vport *);
+void lpfc_sli4_vport_delete_fcp_xri_aborted(struct lpfc_vport *);
 int lpfc_sli4_brdreset(struct lpfc_hba *);
 int lpfc_sli4_add_fcf_record(struct lpfc_hba *, struct fcf_record *);
 void lpfc_sli_remove_dflt_fcf(struct lpfc_hba *);
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 386cf92de492..0a4d376dbca5 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
 /*******************************************************************
  * This file is part of the Emulex Linux Device Driver for         *
  * Fibre Channel Host Bus Adapters.                                *
- * Copyright (C) 2004-2010 Emulex.  All rights reserved.           *
+ * Copyright (C) 2004-2011 Emulex.  All rights reserved.           *
  * EMULEX and SLI are trademarks of Emulex.                        *
  * www.emulex.com                                                  *
  *                                                                 *
@@ -18,7 +18,7 @@
  * included with this package.                                     *
  *******************************************************************/
 
-#define LPFC_DRIVER_VERSION "8.3.20"
+#define LPFC_DRIVER_VERSION "8.3.21"
 #define LPFC_DRIVER_NAME		"lpfc"
 #define LPFC_SP_DRIVER_HANDLER_NAME	"lpfc:sp"
 #define LPFC_FP_DRIVER_HANDLER_NAME	"lpfc:fp"
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 6b8d2952e32f..30ba5440c67a 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -464,6 +464,7 @@ disable_vport(struct fc_vport *fc_vport)
 	struct lpfc_hba   *phba = vport->phba;
 	struct lpfc_nodelist *ndlp = NULL, *next_ndlp = NULL;
 	long timeout;
+	struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
 
 	ndlp = lpfc_findnode_did(vport, Fabric_DID);
 	if (ndlp && NLP_CHK_NODE_ACT(ndlp)
@@ -498,6 +499,9 @@ disable_vport(struct fc_vport *fc_vport)
 	 * scsi_host_put() to release the vport.
 	 */
 	lpfc_mbx_unreg_vpi(vport);
+	spin_lock_irq(shost->host_lock);
+	vport->fc_flag |= FC_VPORT_NEEDS_INIT_VPI;
+	spin_unlock_irq(shost->host_lock);
 
 	lpfc_vport_set_state(vport, FC_VPORT_DISABLED);
 	lpfc_printf_vlog(vport, KERN_ERR, LOG_VPORT,
diff --git a/drivers/scsi/megaraid/megaraid_sas.h b/drivers/scsi/megaraid/megaraid_sas.h
index 1b5e375732c0..635b228c3ead 100644
--- a/drivers/scsi/megaraid/megaraid_sas.h
+++ b/drivers/scsi/megaraid/megaraid_sas.h
@@ -33,9 +33,9 @@
 /*
  * MegaRAID SAS Driver meta data
  */
-#define MEGASAS_VERSION				"00.00.05.29-rc1"
-#define MEGASAS_RELDATE				"Dec. 7, 2010"
-#define MEGASAS_EXT_VERSION			"Tue. Dec. 7 17:00:00 PDT 2010"
+#define MEGASAS_VERSION				"00.00.05.34-rc1"
+#define MEGASAS_RELDATE				"Feb. 24, 2011"
+#define MEGASAS_EXT_VERSION			"Thu. Feb. 24 17:00:00 PDT 2011"
 
 /*
  * Device IDs
@@ -723,6 +723,7 @@ struct megasas_ctrl_info {
 						MEGASAS_MAX_DEV_PER_CHANNEL)
 
 #define MEGASAS_MAX_SECTORS                    (2*1024)
+#define MEGASAS_MAX_SECTORS_IEEE		(2*128)
 #define MEGASAS_DBG_LVL				1
 
 #define MEGASAS_FW_BUSY				1
@@ -1477,4 +1478,7 @@ struct megasas_mgmt_info {
 	int max_index;
 };
 
+#define msi_control_reg(base) (base + PCI_MSI_FLAGS)
+#define PCI_MSIX_FLAGS_ENABLE (1 << 15)
+
 #endif				/*LSI_MEGARAID_SAS_H */
diff --git a/drivers/scsi/megaraid/megaraid_sas_base.c b/drivers/scsi/megaraid/megaraid_sas_base.c
index 5d6d07bd1cd0..f875e818905f 100644
--- a/drivers/scsi/megaraid/megaraid_sas_base.c
+++ b/drivers/scsi/megaraid/megaraid_sas_base.c
@@ -18,12 +18,13 @@
  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  *
  *  FILE: megaraid_sas_base.c
- *  Version : v00.00.05.29-rc1
+ *  Version : v00.00.05.34-rc1
  *
  *  Authors: LSI Corporation
  *           Sreenivas Bagalkote
  *           Sumant Patro
  *           Bo Yang
+ *           Adam Radford <linuxraid@lsi.com>
  *
  *  Send feedback to: <megaraidlinux@lsi.com>
  *
@@ -134,7 +135,11 @@ spinlock_t poll_aen_lock;
 void
 megasas_complete_cmd(struct megasas_instance *instance, struct megasas_cmd *cmd,
 		     u8 alt_status);
-
+static u32
+megasas_read_fw_status_reg_gen2(struct megasas_register_set __iomem *regs);
+static int
+megasas_adp_reset_gen2(struct megasas_instance *instance,
+		       struct megasas_register_set __iomem *reg_set);
 static irqreturn_t megasas_isr(int irq, void *devp);
 static u32
 megasas_init_adapter_mfi(struct megasas_instance *instance);
@@ -554,6 +559,8 @@ static int
 megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
 {
 	u32 status;
+	u32 mfiStatus = 0;
+
 	/*
 	 * Check if it is our interrupt
 	 */
@@ -564,6 +571,15 @@ megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
 	}
 
 	/*
+	 * Check if it is our interrupt
+	 */
+	if ((megasas_read_fw_status_reg_gen2(regs) & MFI_STATE_MASK) ==
+	    MFI_STATE_FAULT) {
+		mfiStatus = MFI_INTR_FLAG_FIRMWARE_STATE_CHANGE;
+	} else
+		mfiStatus = MFI_INTR_FLAG_REPLY_MESSAGE;
+
+	/*
 	 * Clear the interrupt by writing back the same value
 	 */
 	writel(status, &regs->outbound_intr_status);
@@ -573,7 +589,7 @@ megasas_clear_intr_skinny(struct megasas_register_set __iomem *regs)
 	*/
 	readl(&regs->outbound_intr_status);
 
-	return 1;
+	return mfiStatus;
 }
 
 /**
@@ -597,17 +613,6 @@ megasas_fire_cmd_skinny(struct megasas_instance *instance,
 }
 
 /**
- * megasas_adp_reset_skinny -	For controller reset
- * @regs:				MFI register set
- */
-static int
-megasas_adp_reset_skinny(struct megasas_instance *instance,
-			struct megasas_register_set __iomem *regs)
-{
-	return 0;
-}
-
-/**
  * megasas_check_reset_skinny -	For controller reset check
  * @regs:				MFI register set
  */
@@ -625,7 +630,7 @@ static struct megasas_instance_template megasas_instance_template_skinny = {
 	.disable_intr = megasas_disable_intr_skinny,
 	.clear_intr = megasas_clear_intr_skinny,
 	.read_fw_status_reg = megasas_read_fw_status_reg_skinny,
-	.adp_reset = megasas_adp_reset_skinny,
+	.adp_reset = megasas_adp_reset_gen2,
 	.check_reset = megasas_check_reset_skinny,
 	.service_isr = megasas_isr,
 	.tasklet = megasas_complete_cmd_dpc,
@@ -740,20 +745,28 @@ megasas_adp_reset_gen2(struct megasas_instance *instance,
 {
 	u32			retry = 0 ;
 	u32			HostDiag;
+	u32			*seq_offset = &reg_set->seq_offset;
+	u32			*hostdiag_offset = &reg_set->host_diag;
+
+	if (instance->instancet == &megasas_instance_template_skinny) {
+		seq_offset = &reg_set->fusion_seq_offset;
+		hostdiag_offset = &reg_set->fusion_host_diag;
+	}
+
+	writel(0, seq_offset);
+	writel(4, seq_offset);
+	writel(0xb, seq_offset);
+	writel(2, seq_offset);
+	writel(7, seq_offset);
+	writel(0xd, seq_offset);
 
-	writel(0, &reg_set->seq_offset);
-	writel(4, &reg_set->seq_offset);
-	writel(0xb, &reg_set->seq_offset);
-	writel(2, &reg_set->seq_offset);
-	writel(7, &reg_set->seq_offset);
-	writel(0xd, &reg_set->seq_offset);
 	msleep(1000);
 
-	HostDiag = (u32)readl(&reg_set->host_diag);
+	HostDiag = (u32)readl(hostdiag_offset);
 
 	while ( !( HostDiag & DIAG_WRITE_ENABLE) ) {
 		msleep(100);
-		HostDiag = (u32)readl(&reg_set->host_diag);
+		HostDiag = (u32)readl(hostdiag_offset);
 		printk(KERN_NOTICE "RESETGEN2: retry=%x, hostdiag=%x\n",
 					retry, HostDiag);
 
@@ -764,14 +777,14 @@ megasas_adp_reset_gen2(struct megasas_instance *instance,
 
 	printk(KERN_NOTICE "ADP_RESET_GEN2: HostDiag=%x\n", HostDiag);
 
-	writel((HostDiag | DIAG_RESET_ADAPTER), &reg_set->host_diag);
+	writel((HostDiag | DIAG_RESET_ADAPTER), hostdiag_offset);
 
 	ssleep(10);
 
-	HostDiag = (u32)readl(&reg_set->host_diag);
+	HostDiag = (u32)readl(hostdiag_offset);
 	while ( ( HostDiag & DIAG_RESET_ADAPTER) ) {
 		msleep(100);
-		HostDiag = (u32)readl(&reg_set->host_diag);
+		HostDiag = (u32)readl(hostdiag_offset);
 		printk(KERN_NOTICE "RESET_GEN2: retry=%x, hostdiag=%x\n",
 				retry, HostDiag);
 
@@ -2503,7 +2516,9 @@ megasas_deplete_reply_queue(struct megasas_instance *instance,
 	if ((mfiStatus = instance->instancet->clear_intr(
 						instance->reg_set)
 						) == 0) {
-		return IRQ_NONE;
+		/* Hardware may not set outbound_intr_status in MSI-X mode */
+		if (!instance->msi_flag)
+			return IRQ_NONE;
 	}
 
 	instance->mfiStatus = mfiStatus;
@@ -2611,7 +2626,9 @@ megasas_transition_to_ready(struct megasas_instance* instance)
 		case MFI_STATE_FAULT:
 
 			printk(KERN_DEBUG "megasas: FW in FAULT state!!\n");
-			return -ENODEV;
+			max_wait = MEGASAS_RESET_WAIT_TIME;
+			cur_state = MFI_STATE_FAULT;
+			break;
 
 		case MFI_STATE_WAIT_HANDSHAKE:
 			/*
@@ -3424,7 +3441,6 @@ fail_reply_queue:
 	megasas_free_cmds(instance);
 
 fail_alloc_cmds:
-	iounmap(instance->reg_set);
 	return 1;
 }
 
@@ -3494,7 +3510,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 
 	/* Get operational params, sge flags, send init cmd to controller */
 	if (instance->instancet->init_adapter(instance))
-		return -ENODEV;
+		goto fail_init_adapter;
 
 	printk(KERN_ERR "megasas: INIT adapter done\n");
 
@@ -3543,7 +3559,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 	* Setup tasklet for cmd completion
 	*/
 
-	tasklet_init(&instance->isr_tasklet, megasas_complete_cmd_dpc,
+	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
 		(unsigned long)instance);
 
 	/* Initialize the cmd completion timer */
@@ -3553,6 +3569,7 @@ static int megasas_init_fw(struct megasas_instance *instance)
 				MEGASAS_COMPLETION_TIMER_INTERVAL);
 	return 0;
 
+fail_init_adapter:
 fail_ready_state:
 	iounmap(instance->reg_set);
 
@@ -3820,6 +3837,10 @@ static int megasas_io_attach(struct megasas_instance *instance)
 			instance->max_fw_cmds - MEGASAS_INT_CMDS;
 	host->this_id = instance->init_id;
 	host->sg_tablesize = instance->max_num_sge;
+
+	if (instance->fw_support_ieee)
+		instance->max_sectors_per_req = MEGASAS_MAX_SECTORS_IEEE;
+
 	/*
 	 * Check if the module parameter value for max_sectors can be used
 	 */
@@ -3899,9 +3920,26 @@ fail_set_dma_mask:
 static int __devinit
 megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 {
-	int rval;
+	int rval, pos;
 	struct Scsi_Host *host;
 	struct megasas_instance *instance;
+	u16 control = 0;
+
+	/* Reset MSI-X in the kdump kernel */
+	if (reset_devices) {
+		pos = pci_find_capability(pdev, PCI_CAP_ID_MSIX);
+		if (pos) {
+			pci_read_config_word(pdev, msi_control_reg(pos),
+					     &control);
+			if (control & PCI_MSIX_FLAGS_ENABLE) {
+				dev_info(&pdev->dev, "resetting MSI-X\n");
+				pci_write_config_word(pdev,
+						      msi_control_reg(pos),
+						      control &
+						      ~PCI_MSIX_FLAGS_ENABLE);
+			}
+		}
+	}
 
 	/*
 	 * Announce PCI information
@@ -4039,12 +4077,6 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	else
 		INIT_WORK(&instance->work_init, process_fw_state_change_wq);
 
-	/*
-	 * Initialize MFI Firmware
-	 */
-	if (megasas_init_fw(instance))
-		goto fail_init_mfi;
-
 	/* Try to enable MSI-X */
 	if ((instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078R) &&
 	    (instance->pdev->device != PCI_DEVICE_ID_LSI_SAS1078DE) &&
@@ -4054,6 +4086,12 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 		instance->msi_flag = 1;
 
 	/*
+	 * Initialize MFI Firmware
+	 */
+	if (megasas_init_fw(instance))
+		goto fail_init_mfi;
+
+	/*
 	 * Register IRQ
 	 */
 	if (request_irq(instance->msi_flag ? instance->msixentry.vector :
@@ -4105,24 +4143,23 @@ megasas_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
 	instance->instancet->disable_intr(instance->reg_set);
 	free_irq(instance->msi_flag ? instance->msixentry.vector :
 		 instance->pdev->irq, instance);
+fail_irq:
+	if (instance->pdev->device == PCI_DEVICE_ID_LSI_FUSION)
+		megasas_release_fusion(instance);
+	else
+		megasas_release_mfi(instance);
+      fail_init_mfi:
 	if (instance->msi_flag)
 		pci_disable_msix(instance->pdev);
-
-      fail_irq:
-      fail_init_mfi:
       fail_alloc_dma_buf:
 	if (instance->evt_detail)
 		pci_free_consistent(pdev, sizeof(struct megasas_evt_detail),
 				    instance->evt_detail,
 				    instance->evt_detail_h);
 
-	if (instance->producer) {
+	if (instance->producer)
 		pci_free_consistent(pdev, sizeof(u32), instance->producer,
 				    instance->producer_h);
-		megasas_release_mfi(instance);
-	} else {
-		megasas_release_fusion(instance);
-	}
 	if (instance->consumer)
 		pci_free_consistent(pdev, sizeof(u32), instance->consumer,
 				    instance->consumer_h);
@@ -4242,9 +4279,8 @@ megasas_suspend(struct pci_dev *pdev, pm_message_t state)
 	/* cancel the delayed work if this work still in queue */
 	if (instance->ev != NULL) {
 		struct megasas_aen_event *ev = instance->ev;
-		cancel_delayed_work(
+		cancel_delayed_work_sync(
 			(struct delayed_work *)&ev->hotplug_work);
-		flush_scheduled_work();
 		instance->ev = NULL;
 	}
 
@@ -4297,6 +4333,10 @@ megasas_resume(struct pci_dev *pdev)
 	if (megasas_set_dma_mask(pdev))
 		goto fail_set_dma_mask;
 
+	/* Now re-enable MSI-X */
+	if (instance->msi_flag)
+		pci_enable_msix(instance->pdev, &instance->msixentry, 1);
+
 	/*
 	 * Initialize MFI Firmware
 	 */
@@ -4333,10 +4373,6 @@ megasas_resume(struct pci_dev *pdev)
 	tasklet_init(&instance->isr_tasklet, instance->instancet->tasklet,
 		     (unsigned long)instance);
 
-	/* Now re-enable MSI-X */
-	if (instance->msi_flag)
-		pci_enable_msix(instance->pdev, &instance->msixentry, 1);
-
 	/*
 	 * Register IRQ
 	 */
@@ -4417,9 +4453,8 @@ static void __devexit megasas_detach_one(struct pci_dev *pdev)
 	/* cancel the delayed work if this work still in queue*/
 	if (instance->ev != NULL) {
 		struct megasas_aen_event *ev = instance->ev;
-		cancel_delayed_work(
+		cancel_delayed_work_sync(
 			(struct delayed_work *)&ev->hotplug_work);
-		flush_scheduled_work();
 		instance->ev = NULL;
 	}
 
@@ -4611,6 +4646,9 @@ megasas_mgmt_fw_ioctl(struct megasas_instance *instance,
 	 * For each user buffer, create a mirror buffer and copy in
 	 */
 	for (i = 0; i < ioc->sge_count; i++) {
+		if (!ioc->sgl[i].iov_len)
+			continue;
+
 		kbuff_arr[i] = dma_alloc_coherent(&instance->pdev->dev,
 						    ioc->sgl[i].iov_len,
 						    &buf_handle, GFP_KERNEL);
@@ -5177,6 +5215,7 @@ megasas_aen_polling(struct work_struct *work)
 			break;
 
 		case MR_EVT_LD_OFFLINE:
+		case MR_EVT_CFG_CLEARED:
 		case MR_EVT_LD_DELETED:
 			megasas_get_ld_list(instance);
 			for (i = 0; i < MEGASAS_MAX_LD_CHANNELS; i++) {
diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index c1e09d5a6196..905c1e9317b6 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -82,6 +82,10 @@ u16 MR_TargetIdToLdGet(u32 ldTgtId, struct MR_FW_RAID_MAP_ALL *map);
 struct MR_LD_RAID *MR_LdRaidGet(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
 
 u16 MR_GetLDTgtId(u32 ld, struct MR_FW_RAID_MAP_ALL *map);
+
+void
+megasas_check_and_restore_queue_depth(struct megasas_instance *instance);
+
 u8 MR_ValidateMapInfo(struct MR_FW_RAID_MAP_ALL *map,
 		      struct LD_LOAD_BALANCE_INFO *lbInfo);
 u16 get_updated_dev_handle(struct LD_LOAD_BALANCE_INFO *lbInfo,
@@ -984,13 +988,15 @@ megasas_init_adapter_fusion(struct megasas_instance *instance)
 
 	return 0;
 
-fail_alloc_cmds:
-fail_alloc_mfi_cmds:
 fail_map_info:
 	if (i == 1)
 		dma_free_coherent(&instance->pdev->dev, fusion->map_sz,
 				  fusion->ld_map[0], fusion->ld_map_phys[0]);
 fail_ioc_init:
+	megasas_free_cmds_fusion(instance);
+fail_alloc_cmds:
+	megasas_free_cmds(instance);
+fail_alloc_mfi_cmds:
 	return 1;
 }
 
@@ -1432,8 +1438,7 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
 	local_map_ptr = fusion->ld_map[(instance->map_id & 1)];
 
 	/* Check if this is a system PD I/O */
-	if ((instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) &&
-	    (instance->pd_list[pd_index].driveType == TYPE_DISK)) {
+	if (instance->pd_list[pd_index].driveState == MR_PD_STATE_SYSTEM) {
 		io_request->Function = 0;
 		io_request->DevHandle =
 			local_map_ptr->raidMap.devHndlInfo[device_id].curDevHdl;
@@ -1456,7 +1461,7 @@ megasas_build_dcdb_fusion(struct megasas_instance *instance,
 			 MEGASAS_REQ_DESCRIPT_FLAGS_TYPE_SHIFT);
 	}
 	io_request->RaidContext.VirtualDiskTgtId = device_id;
-	io_request->LUN[0] = scmd->device->lun;
+	io_request->LUN[1] = scmd->device->lun;
 	io_request->DataLength = scsi_bufflen(scmd);
 }
 
@@ -1480,7 +1485,7 @@ megasas_build_io_fusion(struct megasas_instance *instance,
 	device_id = MEGASAS_DEV_INDEX(instance, scp);
 
 	/* Zero out some fields so they don't get reused */
-	io_request->LUN[0] = 0;
+	io_request->LUN[1] = 0;
 	io_request->CDB.EEDP32.PrimaryReferenceTag = 0;
 	io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0;
 	io_request->EEDPFlags = 0;
@@ -1744,7 +1749,7 @@ complete_cmd_fusion(struct megasas_instance *instance)
 	wmb();
 	writel(fusion->last_reply_idx,
 	       &instance->reg_set->reply_post_host_index);
-
+	megasas_check_and_restore_queue_depth(instance);
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2.h b/drivers/scsi/mpt2sas/mpi/mpi2.h
index 8be75e65f763..a3e60385787f 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2.h
@@ -8,7 +8,7 @@
  *                  scatter/gather formats.
  *  Creation Date:  June 21, 2006
  *
- *  mpi2.h Version:  02.00.16
+ *  mpi2.h Version:  02.00.17
  *
  *  Version History
  *  ---------------
@@ -63,6 +63,7 @@
  *                      function codes, 0xF0 to 0xFF.
  *  05-12-10  02.00.16  Bumped MPI2_HEADER_VERSION_UNIT.
  *                      Added alternative defines for the SGE Direction bit.
+ *  08-11-10  02.00.17  Bumped MPI2_HEADER_VERSION_UNIT.
  *  --------------------------------------------------------------------------
  */
 
@@ -88,7 +89,7 @@
 #define MPI2_VERSION_02_00                  (0x0200)
 
 /* versioning for this MPI header set */
-#define MPI2_HEADER_VERSION_UNIT            (0x10)
+#define MPI2_HEADER_VERSION_UNIT            (0x11)
 #define MPI2_HEADER_VERSION_DEV             (0x00)
 #define MPI2_HEADER_VERSION_UNIT_MASK       (0xFF00)
 #define MPI2_HEADER_VERSION_UNIT_SHIFT      (8)
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
index d76a65847603..f5b9c766e28f 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_cnfg.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Configuration messages and pages
  *  Creation Date:  November 10, 2006
  *
- *    mpi2_cnfg.h Version:  02.00.15
+ *    mpi2_cnfg.h Version:  02.00.16
  *
  *  Version History
  *  ---------------
@@ -125,6 +125,8 @@
  *                      define.
  *                      Added MPI2_PHYSDISK0_INCOMPATIBLE_MEDIA_TYPE define.
  *                      Added MPI2_SAS_NEG_LINK_RATE_UNSUPPORTED_PHY define.
+ *  08-11-10  02.00.16  Removed IO Unit Page 1 device path (multi-pathing)
+ *                      defines.
  *  --------------------------------------------------------------------------
  */
 
@@ -745,8 +747,6 @@ typedef struct _MPI2_CONFIG_PAGE_IO_UNIT_1
 #define MPI2_IOUNITPAGE1_DISABLE_IR                     (0x00000040)
 #define MPI2_IOUNITPAGE1_DISABLE_TASK_SET_FULL_HANDLING (0x00000020)
 #define MPI2_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID        (0x00000004)
-#define MPI2_IOUNITPAGE1_MULTI_PATHING                  (0x00000002)
-#define MPI2_IOUNITPAGE1_SINGLE_PATHING                 (0x00000000)
 
 
 /* IO Unit Page 3 */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt b/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
deleted file mode 100644
index b1e88f26b748..000000000000
--- a/drivers/scsi/mpt2sas/mpi/mpi2_history.txt
+++ /dev/null
@@ -1,384 +0,0 @@
- ==============================
- Fusion-MPT MPI 2.0 Header File Change History
- ==============================
-
- Copyright (c) 2000-2010 LSI Corporation.
-
- ---------------------------------------
- Header Set Release Version:    02.00.14
- Header Set Release Date:       10-28-09
- ---------------------------------------
-
- Filename               Current version     Prior version
- ----------             ---------------     -------------
- mpi2.h                 02.00.14            02.00.13
- mpi2_cnfg.h            02.00.13            02.00.12
- mpi2_init.h            02.00.08            02.00.07
- mpi2_ioc.h             02.00.13            02.00.12
- mpi2_raid.h            02.00.04            02.00.04
- mpi2_sas.h             02.00.03            02.00.02
- mpi2_targ.h            02.00.03            02.00.03
- mpi2_tool.h            02.00.04            02.00.04
- mpi2_type.h            02.00.00            02.00.00
- mpi2_ra.h              02.00.00            02.00.00
- mpi2_hbd.h             02.00.00
- mpi2_history.txt       02.00.14            02.00.13
-
-
- *  Date      Version   Description
- *  --------  --------  ------------------------------------------------------
-
-mpi2.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  Bumped MPI2_HEADER_VERSION_UNIT.
- *  06-26-07  02.00.02  Bumped MPI2_HEADER_VERSION_UNIT.
- *  08-31-07  02.00.03  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Moved ReplyPostHostIndex register to offset 0x6C of the
- *                      MPI2_SYSTEM_INTERFACE_REGS and modified the define for
- *                      MPI2_REPLY_POST_HOST_INDEX_OFFSET.
- *                      Added union of request descriptors.
- *                      Added union of reply descriptors.
- *  10-31-07  02.00.04  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added define for MPI2_VERSION_02_00.
- *                      Fixed the size of the FunctionDependent5 field in the
- *                      MPI2_DEFAULT_REPLY structure.
- *  12-18-07  02.00.05  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Removed the MPI-defined Fault Codes and extended the
- *                      product specific codes up to 0xEFFF.
- *                      Added a sixth key value for the WriteSequence register
- *                      and changed the flush value to 0x0.
- *                      Added message function codes for Diagnostic Buffer Post
- *                      and Diagnsotic Release.
- *                      New IOCStatus define: MPI2_IOCSTATUS_DIAGNOSTIC_RELEASED
- *                      Moved MPI2_VERSION_UNION from mpi2_ioc.h.
- *  02-29-08  02.00.06  Bumped MPI2_HEADER_VERSION_UNIT.
- *  03-03-08  02.00.07  Bumped MPI2_HEADER_VERSION_UNIT.
- *  05-21-08  02.00.08  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added #defines for marking a reply descriptor as unused.
- *  06-27-08  02.00.09  Bumped MPI2_HEADER_VERSION_UNIT.
- *  10-02-08  02.00.10  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Moved LUN field defines from mpi2_init.h.
- *  01-19-09  02.00.11  Bumped MPI2_HEADER_VERSION_UNIT.
- *  05-06-09  02.00.12  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      In all request and reply descriptors, replaced VF_ID
- *                      field with MSIxIndex field.
- *                      Removed DevHandle field from
- *                      MPI2_SCSI_IO_SUCCESS_REPLY_DESCRIPTOR and made those
- *                      bytes reserved.
- *                      Added RAID Accelerator functionality.
- *  07-30-09  02.00.13  Bumped MPI2_HEADER_VERSION_UNIT.
- *  10-28-09  02.00.14  Bumped MPI2_HEADER_VERSION_UNIT.
- *                      Added MSI-x index mask and shift for Reply Post Host
- *                      Index register.
- *                      Added function code for Host Based Discovery Action.
- *  --------------------------------------------------------------------------
-
-mpi2_cnfg.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  Added defines for SAS IO Unit Page 2 PhyFlags.
- *                      Added Manufacturing Page 11.
- *                      Added MPI2_SAS_EXPANDER0_FLAGS_CONNECTOR_END_DEVICE
- *                      define.
- *  06-26-07  02.00.02  Adding generic structure for product-specific
- *                      Manufacturing pages: MPI2_CONFIG_PAGE_MANUFACTURING_PS.
- *                      Rework of BIOS Page 2 configuration page.
- *                      Fixed MPI2_BIOSPAGE2_BOOT_DEVICE to be a union of the
- *                      forms.
- *                      Added configuration pages IOC Page 8 and Driver
- *                      Persistent Mapping Page 0.
- *  08-31-07  02.00.03  Modified configuration pages dealing with Integrated
- *                      RAID (Manufacturing Page 4, RAID Volume Pages 0 and 1,
- *                      RAID Physical Disk Pages 0 and 1, RAID Configuration
- *                      Page 0).
- *                      Added new value for AccessStatus field of SAS Device
- *                      Page 0 (_SATA_NEEDS_INITIALIZATION).
- *  10-31-07  02.00.04  Added missing SEPDevHandle field to
- *                      MPI2_CONFIG_PAGE_SAS_ENCLOSURE_0.
- *  12-18-07  02.00.05  Modified IO Unit Page 0 to use 32-bit version fields for
- *                      NVDATA.
- *                      Modified IOC Page 7 to use masks and added field for
- *                      SASBroadcastPrimitiveMasks.
- *                      Added MPI2_CONFIG_PAGE_BIOS_4.
- *                      Added MPI2_CONFIG_PAGE_LOG_0.
- *  02-29-08  02.00.06  Modified various names to make them 32-character unique.
- *                      Added SAS Device IDs.
- *                      Updated Integrated RAID configuration pages including
- *                      Manufacturing Page 4, IOC Page 6, and RAID Configuration
- *                      Page 0.
- *  05-21-08  02.00.07  Added define MPI2_MANPAGE4_MIX_SSD_SAS_SATA.
- *                      Added define MPI2_MANPAGE4_PHYSDISK_128MB_COERCION.
- *                      Fixed define MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING.
- *                      Added missing MaxNumRoutedSasAddresses field to
- *                      MPI2_CONFIG_PAGE_EXPANDER_0.
- *                      Added SAS Port Page 0.
- *                      Modified structure layout for
- *                      MPI2_CONFIG_PAGE_DRIVER_MAPPING_0.
- *  06-27-08  02.00.08  Changed MPI2_CONFIG_PAGE_RD_PDISK_1 to use
- *                      MPI2_RAID_PHYS_DISK1_PATH_MAX to size the array.
- *  10-02-08  02.00.09  Changed MPI2_RAID_PGAD_CONFIGNUM_MASK from 0x0000FFFF
- *                      to 0x000000FF.
- *                      Added two new values for the Physical Disk Coercion Size
- *                      bits in the Flags field of Manufacturing Page 4.
- *                      Added product-specific Manufacturing pages 16 to 31.
- *                      Modified Flags bits for controlling write cache on SATA
- *                      drives in IO Unit Page 1.
- *                      Added new bit to AdditionalControlFlags of SAS IO Unit
- *                      Page 1 to control Invalid Topology Correction.
- *                      Added SupportedPhysDisks field to RAID Volume Page 1 and
- *                      added related defines.
- *                      Added additional defines for RAID Volume Page 0
- *                      VolumeStatusFlags field.
- *                      Modified meaning of RAID Volume Page 0 VolumeSettings
- *                      define for auto-configure of hot-swap drives.
- *                      Added PhysDiskAttributes field (and related defines) to
- *                      RAID Physical Disk Page 0.
- *                      Added MPI2_SAS_PHYINFO_PHY_VACANT define.
- *                      Added three new DiscoveryStatus bits for SAS IO Unit
- *                      Page 0 and SAS Expander Page 0.
- *                      Removed multiplexing information from SAS IO Unit pages.
- *                      Added BootDeviceWaitTime field to SAS IO Unit Page 4.
- *                      Removed Zone Address Resolved bit from PhyInfo and from
- *                      Expander Page 0 Flags field.
- *                      Added two new AccessStatus values to SAS Device Page 0
- *                      for indicating routing problems. Added 3 reserved words
- *                      to this page.
- *  01-19-09  02.00.10  Fixed defines for GPIOVal field of IO Unit Page 3.
- *                      Inserted missing reserved field into structure for IOC
- *                      Page 6.
- *                      Added more pending task bits to RAID Volume Page 0
- *                      VolumeStatusFlags defines.
- *                      Added MPI2_PHYSDISK0_STATUS_FLAG_NOT_CERTIFIED define.
- *                      Added a new DiscoveryStatus bit for SAS IO Unit Page 0
- *                      and SAS Expander Page 0 to flag a downstream initiator
- *                      when in simplified routing mode.
- *                      Removed SATA Init Failure defines for DiscoveryStatus
- *                      fields of SAS IO Unit Page 0 and SAS Expander Page 0.
- *                      Added MPI2_SAS_DEVICE0_ASTATUS_DEVICE_BLOCKED define.
- *                      Added PortGroups, DmaGroup, and ControlGroup fields to
- *                      SAS Device Page 0.
- *  05-06-09  02.00.11  Added structures and defines for IO Unit Page 5 and IO
- *                      Unit Page 6.
- *                      Added expander reduced functionality data to SAS
- *                      Expander Page 0.
- *                      Added SAS PHY Page 2 and SAS PHY Page 3.
- *  07-30-09  02.00.12  Added IO Unit Page 7.
- *                      Added new device ids.
- *                      Added SAS IO Unit Page 5.
- *                      Added partial and slumber power management capable flags
- *                      to SAS Device Page 0 Flags field.
- *                      Added PhyInfo defines for power condition.
- *                      Added Ethernet configuration pages.
- *  10-28-09  02.00.13  Added MPI2_IOUNITPAGE1_ENABLE_HOST_BASED_DISCOVERY.
- *                      Added SAS PHY Page 4 structure and defines.
- *  --------------------------------------------------------------------------
-
-mpi2_init.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  10-31-07  02.00.01  Fixed name for pMpi2SCSITaskManagementRequest_t.
- *  12-18-07  02.00.02  Modified Task Management Target Reset Method defines.
- *  02-29-08  02.00.03  Added Query Task Set and Query Unit Attention.
- *  03-03-08  02.00.04  Fixed name of struct _MPI2_SCSI_TASK_MANAGE_REPLY.
- *  05-21-08  02.00.05  Fixed typo in name of Mpi2SepRequest_t.
- *  10-02-08  02.00.06  Removed Untagged and No Disconnect values from SCSI IO
- *                      Control field Task Attribute flags.
- *                      Moved LUN field defines to mpi2.h becasue they are
- *                      common to many structures.
- *  05-06-09  02.00.07  Changed task management type of Query Unit Attention to
- *                      Query Asynchronous Event.
- *                      Defined two new bits in the SlotStatus field of the SCSI
- *                      Enclosure Processor Request and Reply.
- *  10-28-09  02.00.08  Added defines for decoding the ResponseInfo bytes for
- *                      both SCSI IO Error Reply and SCSI Task Management Reply.
- *                      Added ResponseInfo field to MPI2_SCSI_TASK_MANAGE_REPLY.
- *                      Added MPI2_SCSITASKMGMT_RSP_TM_OVERLAPPED_TAG define.
- *  --------------------------------------------------------------------------
-
-mpi2_ioc.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-04-07  02.00.01  In IOCFacts Reply structure, renamed MaxDevices to
- *                      MaxTargets.
- *                      Added TotalImageSize field to FWDownload Request.
- *                      Added reserved words to FWUpload Request.
- *  06-26-07  02.00.02  Added IR Configuration Change List Event.
- *  08-31-07  02.00.03  Removed SystemReplyQueueDepth field from the IOCInit
- *                      request and replaced it with
- *                      ReplyDescriptorPostQueueDepth and ReplyFreeQueueDepth.
- *                      Replaced the MinReplyQueueDepth field of the IOCFacts
- *                      reply with MaxReplyDescriptorPostQueueDepth.
- *                      Added MPI2_RDPQ_DEPTH_MIN define to specify the minimum
- *                      depth for the Reply Descriptor Post Queue.
- *                      Added SASAddress field to Initiator Device Table
- *                      Overflow Event data.
- *  10-31-07  02.00.04  Added ReasonCode MPI2_EVENT_SAS_INIT_RC_NOT_RESPONDING
- *                      for SAS Initiator Device Status Change Event data.
- *                      Modified Reason Code defines for SAS Topology Change
- *                      List Event data, including adding a bit for PHY Vacant
- *                      status, and adding a mask for the Reason Code.
- *                      Added define for
- *                      MPI2_EVENT_SAS_TOPO_ES_DELAY_NOT_RESPONDING.
- *                      Added define for MPI2_EXT_IMAGE_TYPE_MEGARAID.
- *  12-18-07  02.00.05  Added Boot Status defines for the IOCExceptions field of
- *                      the IOCFacts Reply.
- *                      Removed MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- *                      Moved MPI2_VERSION_UNION to mpi2.h.
- *                      Changed MPI2_EVENT_NOTIFICATION_REQUEST to use masks
- *                      instead of enables, and added SASBroadcastPrimitiveMasks
- *                      field.
- *                      Added Log Entry Added Event and related structure.
- *  02-29-08  02.00.06  Added define MPI2_IOCFACTS_CAPABILITY_INTEGRATED_RAID.
- *                      Removed define MPI2_IOCFACTS_PROTOCOL_SMP_TARGET.
- *                      Added MaxVolumes and MaxPersistentEntries fields to
- *                      IOCFacts reply.
- *                      Added ProtocalFlags and IOCCapabilities fields to
- *                      MPI2_FW_IMAGE_HEADER.
- *                      Removed MPI2_PORTENABLE_FLAGS_ENABLE_SINGLE_PORT.
- *  03-03-08  02.00.07  Fixed MPI2_FW_IMAGE_HEADER by changing Reserved26 to
- *                      a U16 (from a U32).
- *                      Removed extra 's' from EventMasks name.
- *  06-27-08  02.00.08  Fixed an offset in a comment.
- *  10-02-08  02.00.09  Removed SystemReplyFrameSize from MPI2_IOC_INIT_REQUEST.
- *                      Removed CurReplyFrameSize from MPI2_IOC_FACTS_REPLY and
- *                      renamed MinReplyFrameSize to ReplyFrameSize.
- *                      Added MPI2_IOCFACTS_EXCEPT_IR_FOREIGN_CONFIG_MAX.
- *                      Added two new RAIDOperation values for Integrated RAID
- *                      Operations Status Event data.
- *                      Added four new IR Configuration Change List Event data
- *                      ReasonCode values.
- *                      Added two new ReasonCode defines for SAS Device Status
- *                      Change Event data.
- *                      Added three new DiscoveryStatus bits for the SAS
- *                      Discovery event data.
- *                      Added Multiplexing Status Change bit to the PhyStatus
- *                      field of the SAS Topology Change List event data.
- *                      Removed define for MPI2_INIT_IMAGE_BOOTFLAGS_XMEMCOPY.
- *                      BootFlags are now product-specific.
- *                      Added defines for the indivdual signature bytes
- *                      for MPI2_INIT_IMAGE_FOOTER.
- *  01-19-09  02.00.10  Added MPI2_IOCFACTS_CAPABILITY_EVENT_REPLAY define.
- *                      Added MPI2_EVENT_SAS_DISC_DS_DOWNSTREAM_INITIATOR
- *                      define.
- *                      Added MPI2_EVENT_SAS_DEV_STAT_RC_SATA_INIT_FAILURE
- *                      define.
- *                      Removed MPI2_EVENT_SAS_DISC_DS_SATA_INIT_FAILURE define.
- *  05-06-09  02.00.11  Added MPI2_IOCFACTS_CAPABILITY_RAID_ACCELERATOR define.
- *                      Added MPI2_IOCFACTS_CAPABILITY_MSI_X_INDEX define.
- *                      Added two new reason codes for SAS Device Status Change
- *                      Event.
- *                      Added new event: SAS PHY Counter.
- *  07-30-09  02.00.12  Added GPIO Interrupt event define and structure.
- *                      Added MPI2_IOCFACTS_CAPABILITY_EXTENDED_BUFFER define.
- *                      Added new product id family for 2208.
- *  10-28-09  02.00.13  Added HostMSIxVectors field to MPI2_IOC_INIT_REQUEST.
- *                      Added MaxMSIxVectors field to MPI2_IOC_FACTS_REPLY.
- *                      Added MinDevHandle field to MPI2_IOC_FACTS_REPLY.
- *                      Added MPI2_IOCFACTS_CAPABILITY_HOST_BASED_DISCOVERY.
- *                      Added MPI2_EVENT_HOST_BASED_DISCOVERY_PHY define.
- *                      Added MPI2_EVENT_SAS_TOPO_ES_NO_EXPANDER define.
- *                      Added Host Based Discovery Phy Event data.
- *                      Added defines for ProductID Product field
- *                      (MPI2_FW_HEADER_PID_).
- *                      Modified values for SAS ProductID Family
- *                      (MPI2_FW_HEADER_PID_FAMILY_).
- *  --------------------------------------------------------------------------
-
-mpi2_raid.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  08-31-07  02.00.01  Modifications to RAID Action request and reply,
- *                      including the Actions and ActionData.
- *  02-29-08  02.00.02  Added MPI2_RAID_ACTION_ADATA_DISABL_FULL_REBUILD.
- *  05-21-08  02.00.03  Added MPI2_RAID_VOL_CREATION_NUM_PHYSDISKS so that
- *                      the PhysDisk array in MPI2_RAID_VOLUME_CREATION_STRUCT
- *                      can be sized by the build environment.
- *  07-30-09  02.00.04  Added proper define for the Use Default Settings bit of
- *                      VolumeCreationFlags and marked the old one as obsolete.
- *  05-12-10  02.00.05  Added MPI2_RAID_VOL_FLAGS_OP_MDC define.
- *  --------------------------------------------------------------------------
-
-mpi2_sas.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  06-26-07  02.00.01  Added Clear All Persistent Operation to SAS IO Unit
- *                      Control Request.
- *  10-02-08  02.00.02  Added Set IOC Parameter Operation to SAS IO Unit Control
- *                      Request.
- *  10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
- *                      to MPI2_SGE_IO_UNION since it supports chained SGLs.
- *  05-12-10  02.00.04  Modified some comments.
- *  --------------------------------------------------------------------------
-
-mpi2_targ.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  08-31-07  02.00.01  Added Command Buffer Data Location Address Space bits to
- *                      BufferPostFlags field of CommandBufferPostBase Request.
- *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
- *  10-02-08  02.00.03  Removed NextCmdBufferOffset from
- *                      MPI2_TARGET_CMD_BUF_POST_BASE_REQUEST.
- *                      Target Status Send Request only takes a single SGE for
- *                      response data.
- *  --------------------------------------------------------------------------
-
-mpi2_tool.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  12-18-07  02.00.01  Added Diagnostic Buffer Post and Diagnostic Release
- *                      structures and defines.
- *  02-29-08  02.00.02  Modified various names to make them 32-character unique.
- *  05-06-09  02.00.03  Added ISTWI Read Write Tool and Diagnostic CLI Tool.
- *  07-30-09  02.00.04  Added ExtendedType field to DiagnosticBufferPost request
- *                      and reply messages.
- *                      Added MPI2_DIAG_BUF_TYPE_EXTENDED.
- *                      Incremented MPI2_DIAG_BUF_TYPE_COUNT.
- *  05-12-10  02.00.05  Added Diagnostic Data Upload tool.
- *  --------------------------------------------------------------------------
-
-mpi2_type.h
- *  04-30-07  02.00.00  Corresponds to Fusion-MPT MPI Specification Rev A.
- *  --------------------------------------------------------------------------
-
-mpi2_ra.h
- *  05-06-09  02.00.00  Initial version.
- *  --------------------------------------------------------------------------
-
-mpi2_hbd.h
- *  10-28-09  02.00.00  Initial version.
- *  --------------------------------------------------------------------------
-
-
-mpi2_history.txt         Parts list history
-
-Filename     02.00.14  02.00.13  02.00.12
-----------   --------  --------  --------
-mpi2.h       02.00.14  02.00.13  02.00.12
-mpi2_cnfg.h  02.00.13  02.00.12  02.00.11
-mpi2_init.h  02.00.08  02.00.07  02.00.07
-mpi2_ioc.h   02.00.13  02.00.12  02.00.11
-mpi2_raid.h  02.00.04  02.00.04  02.00.03
-mpi2_sas.h   02.00.03  02.00.02  02.00.02
-mpi2_targ.h  02.00.03  02.00.03  02.00.03
-mpi2_tool.h  02.00.04  02.00.04  02.00.03
-mpi2_type.h  02.00.00  02.00.00  02.00.00
-mpi2_ra.h    02.00.00  02.00.00  02.00.00
-mpi2_hbd.h   02.00.00
-
-Filename     02.00.11  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06
-----------   --------  --------  --------  --------  --------  --------
-mpi2.h       02.00.11  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06
-mpi2_cnfg.h  02.00.10  02.00.09  02.00.08  02.00.07  02.00.06  02.00.06
-mpi2_init.h  02.00.06  02.00.06  02.00.05  02.00.05  02.00.04  02.00.03
-mpi2_ioc.h   02.00.10  02.00.09  02.00.08  02.00.07  02.00.07  02.00.06
-mpi2_raid.h  02.00.03  02.00.03  02.00.03  02.00.03  02.00.02  02.00.02
-mpi2_sas.h   02.00.02  02.00.02  02.00.01  02.00.01  02.00.01  02.00.01
-mpi2_targ.h  02.00.03  02.00.03  02.00.02  02.00.02  02.00.02  02.00.02
-mpi2_tool.h  02.00.02  02.00.02  02.00.02  02.00.02  02.00.02  02.00.02
-mpi2_type.h  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
-
-Filename     02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
-----------   --------  --------  --------  --------  --------  --------
-mpi2.h       02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
-mpi2_cnfg.h  02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
-mpi2_init.h  02.00.02  02.00.01  02.00.00  02.00.00  02.00.00  02.00.00
-mpi2_ioc.h   02.00.05  02.00.04  02.00.03  02.00.02  02.00.01  02.00.00
-mpi2_raid.h  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00  02.00.00
-mpi2_sas.h   02.00.01  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00
-mpi2_targ.h  02.00.01  02.00.01  02.00.01  02.00.00  02.00.00  02.00.00
-mpi2_tool.h  02.00.01  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
-mpi2_type.h  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00  02.00.00
-
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
index 608f6d6e6fca..fdffde1ebc0f 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_sas.h
@@ -6,7 +6,7 @@
  *          Title:  MPI Serial Attached SCSI structures and definitions
  *  Creation Date:  February 9, 2007
  *
- *  mpi2_sas.h Version:  02.00.04
+ *  mpi2_sas.h Version:  02.00.05
  *
  *  Version History
  *  ---------------
@@ -21,6 +21,7 @@
  *  10-28-09  02.00.03  Changed the type of SGL in MPI2_SATA_PASSTHROUGH_REQUEST
  *                      to MPI2_SGE_IO_UNION since it supports chained SGLs.
  *  05-12-10  02.00.04  Modified some comments.
+ *  08-11-10  02.00.05  Added NCQ operations to SAS IO Unit Control.
  *  --------------------------------------------------------------------------
  */
 
@@ -163,7 +164,7 @@ typedef struct _MPI2_SATA_PASSTHROUGH_REQUEST
     U32                     Reserved4;          /* 0x14 */
     U32                     DataLength;         /* 0x18 */
     U8                      CommandFIS[20];     /* 0x1C */
-    MPI2_SGE_IO_UNION       SGL;                /* 0x20 */
+    MPI2_SGE_IO_UNION       SGL;                /* 0x30 */
 } MPI2_SATA_PASSTHROUGH_REQUEST, MPI2_POINTER PTR_MPI2_SATA_PASSTHROUGH_REQUEST,
   Mpi2SataPassthroughRequest_t, MPI2_POINTER pMpi2SataPassthroughRequest_t;
 
@@ -246,6 +247,8 @@ typedef struct _MPI2_SAS_IOUNIT_CONTROL_REQUEST
 #define MPI2_SAS_OP_REMOVE_DEVICE               (0x0D)
 #define MPI2_SAS_OP_LOOKUP_MAPPING              (0x0E)
 #define MPI2_SAS_OP_SET_IOC_PARAMETER           (0x0F)
+#define MPI2_SAS_OP_DEV_ENABLE_NCQ              (0x14)
+#define MPI2_SAS_OP_DEV_DISABLE_NCQ             (0x15)
 #define MPI2_SAS_OP_PRODUCT_SPECIFIC_MIN        (0x80)
 
 /* values for the PrimFlags field */
diff --git a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
index 5c6e3a67bb94..2a4bceda364b 100644
--- a/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
+++ b/drivers/scsi/mpt2sas/mpi/mpi2_tool.h
@@ -6,7 +6,7 @@
  *          Title:  MPI diagnostic tool structures and definitions
  *  Creation Date:  March 26, 2007
  *
- *    mpi2_tool.h Version:  02.00.05
+ *    mpi2_tool.h Version:  02.00.06
  *
  *  Version History
  *  ---------------
@@ -23,6 +23,8 @@
  *                      Added MPI2_DIAG_BUF_TYPE_EXTENDED.
  *                      Incremented MPI2_DIAG_BUF_TYPE_COUNT.
  *  05-12-10  02.00.05  Added Diagnostic Data Upload tool.
+ *  08-11-10  02.00.06  Added defines that were missing for Diagnostic Buffer
+ *                      Post Request.
  *  --------------------------------------------------------------------------
  */
 
@@ -354,6 +356,10 @@ typedef struct _MPI2_DIAG_BUFFER_POST_REQUEST
 /* count of the number of buffer types */
 #define MPI2_DIAG_BUF_TYPE_COUNT                    (0x03)
 
+/* values for the Flags field */
+#define MPI2_DIAG_BUF_FLAG_RELEASE_ON_FULL          (0x00000002)
+#define MPI2_DIAG_BUF_FLAG_IMMEDIATE_RELEASE        (0x00000001)
+
 
 /****************************************************************************
 *  Diagnostic Buffer Post reply
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index 9ead0399808a..e8a6f1cf1e4b 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -752,20 +752,19 @@ static u8
 _base_get_cb_idx(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 {
 	int i;
-	u8 cb_idx = 0xFF;
-
-	if (smid >= ioc->hi_priority_smid) {
-		if (smid < ioc->internal_smid) {
-			i = smid - ioc->hi_priority_smid;
-			cb_idx = ioc->hpr_lookup[i].cb_idx;
-		} else if (smid <= ioc->hba_queue_depth)  {
-			i = smid - ioc->internal_smid;
-			cb_idx = ioc->internal_lookup[i].cb_idx;
-		}
-	} else {
+	u8 cb_idx;
+
+	if (smid < ioc->hi_priority_smid) {
 		i = smid - 1;
 		cb_idx = ioc->scsi_lookup[i].cb_idx;
-	}
+	} else if (smid < ioc->internal_smid) {
+		i = smid - ioc->hi_priority_smid;
+		cb_idx = ioc->hpr_lookup[i].cb_idx;
+	} else if (smid <= ioc->hba_queue_depth) {
+		i = smid - ioc->internal_smid;
+		cb_idx = ioc->internal_lookup[i].cb_idx;
+	} else
+		cb_idx = 0xFF;
 	return cb_idx;
 }
 
@@ -1430,7 +1429,7 @@ mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
     struct scsi_cmnd *scmd)
 {
 	unsigned long flags;
-	struct request_tracker *request;
+	struct scsiio_tracker *request;
 	u16 smid;
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
@@ -1442,7 +1441,7 @@ mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
 	}
 
 	request = list_entry(ioc->free_list.next,
-	    struct request_tracker, tracker_list);
+	    struct scsiio_tracker, tracker_list);
 	request->scmd = scmd;
 	request->cb_idx = cb_idx;
 	smid = request->smid;
@@ -1496,48 +1495,47 @@ mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid)
 	struct chain_tracker *chain_req, *next;
 
 	spin_lock_irqsave(&ioc->scsi_lookup_lock, flags);
-	if (smid >= ioc->hi_priority_smid) {
-		if (smid < ioc->internal_smid) {
-			/* hi-priority */
-			i = smid - ioc->hi_priority_smid;
-			ioc->hpr_lookup[i].cb_idx = 0xFF;
-			list_add_tail(&ioc->hpr_lookup[i].tracker_list,
-			    &ioc->hpr_free_list);
-		} else {
-			/* internal queue */
-			i = smid - ioc->internal_smid;
-			ioc->internal_lookup[i].cb_idx = 0xFF;
-			list_add_tail(&ioc->internal_lookup[i].tracker_list,
-			    &ioc->internal_free_list);
+	if (smid < ioc->hi_priority_smid) {
+		/* scsiio queue */
+		i = smid - 1;
+		if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
+			list_for_each_entry_safe(chain_req, next,
+			    &ioc->scsi_lookup[i].chain_list, tracker_list) {
+				list_del_init(&chain_req->tracker_list);
+				list_add_tail(&chain_req->tracker_list,
+				    &ioc->free_chain_list);
+			}
 		}
+		ioc->scsi_lookup[i].cb_idx = 0xFF;
+		ioc->scsi_lookup[i].scmd = NULL;
+		list_add_tail(&ioc->scsi_lookup[i].tracker_list,
+		    &ioc->free_list);
 		spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-		return;
-	}
 
-	/* scsiio queue */
-	i = smid - 1;
-	if (!list_empty(&ioc->scsi_lookup[i].chain_list)) {
-		list_for_each_entry_safe(chain_req, next,
-		    &ioc->scsi_lookup[i].chain_list, tracker_list) {
-			list_del_init(&chain_req->tracker_list);
-			list_add_tail(&chain_req->tracker_list,
-			    &ioc->free_chain_list);
+		/*
+		 * See _wait_for_commands_to_complete() call with regards
+		 * to this code.
+		 */
+		if (ioc->shost_recovery && ioc->pending_io_count) {
+			if (ioc->pending_io_count == 1)
+				wake_up(&ioc->reset_wq);
+			ioc->pending_io_count--;
 		}
+		return;
+	} else if (smid < ioc->internal_smid) {
+		/* hi-priority */
+		i = smid - ioc->hi_priority_smid;
+		ioc->hpr_lookup[i].cb_idx = 0xFF;
+		list_add_tail(&ioc->hpr_lookup[i].tracker_list,
+		    &ioc->hpr_free_list);
+	} else if (smid <= ioc->hba_queue_depth) {
+		/* internal queue */
+		i = smid - ioc->internal_smid;
+		ioc->internal_lookup[i].cb_idx = 0xFF;
+		list_add_tail(&ioc->internal_lookup[i].tracker_list,
+		    &ioc->internal_free_list);
 	}
-	ioc->scsi_lookup[i].cb_idx = 0xFF;
-	ioc->scsi_lookup[i].scmd = NULL;
-	list_add_tail(&ioc->scsi_lookup[i].tracker_list,
-	    &ioc->free_list);
 	spin_unlock_irqrestore(&ioc->scsi_lookup_lock, flags);
-
-	/*
-	 * See _wait_for_commands_to_complete() call with regards to this code.
-	 */
-	if (ioc->shost_recovery && ioc->pending_io_count) {
-		if (ioc->pending_io_count == 1)
-			wake_up(&ioc->reset_wq);
-		ioc->pending_io_count--;
-	}
 }
 
 /**
@@ -1725,6 +1723,31 @@ _base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
 }
 
 /**
+ * _base_display_intel_branding - Display branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_intel_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+	if (ioc->pdev->subsystem_vendor == PCI_VENDOR_ID_INTEL &&
+	    ioc->pdev->device == MPI2_MFGPAGE_DEVID_SAS2008) {
+
+		switch (ioc->pdev->subsystem_device) {
+		case MPT2SAS_INTEL_RMS2LL080_SSDID:
+			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+			    MPT2SAS_INTEL_RMS2LL080_BRANDING);
+			break;
+		case MPT2SAS_INTEL_RMS2LL040_SSDID:
+			printk(MPT2SAS_INFO_FMT "%s\n", ioc->name,
+			    MPT2SAS_INTEL_RMS2LL040_BRANDING);
+			break;
+		}
+	}
+}
+
+/**
  * _base_display_ioc_capabilities - Disply IOC's capabilities.
  * @ioc: per adapter object
  *
@@ -1754,6 +1777,7 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
 	    ioc->bios_pg3.BiosVersion & 0x000000FF);
 
 	_base_display_dell_branding(ioc);
+	_base_display_intel_branding(ioc);
 
 	printk(MPT2SAS_INFO_FMT "Protocol=(", ioc->name);
 
@@ -2252,9 +2276,9 @@ _base_allocate_memory_pools(struct MPT2SAS_ADAPTER *ioc,  int sleep_flag)
 	    ioc->name, (unsigned long long) ioc->request_dma));
 	total_sz += sz;
 
-	sz = ioc->scsiio_depth * sizeof(struct request_tracker);
+	sz = ioc->scsiio_depth * sizeof(struct scsiio_tracker);
 	ioc->scsi_lookup_pages = get_order(sz);
-	ioc->scsi_lookup = (struct request_tracker *)__get_free_pages(
+	ioc->scsi_lookup = (struct scsiio_tracker *)__get_free_pages(
 	    GFP_KERNEL, ioc->scsi_lookup_pages);
 	if (!ioc->scsi_lookup) {
 		printk(MPT2SAS_ERR_FMT "scsi_lookup: get_free_pages failed, "
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 283568c6fb04..a3f8aa9baea4 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -69,8 +69,8 @@
 #define MPT2SAS_DRIVER_NAME		"mpt2sas"
 #define MPT2SAS_AUTHOR	"LSI Corporation <DL-MPTFusionLinux@lsi.com>"
 #define MPT2SAS_DESCRIPTION	"LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION		"07.100.00.00"
-#define MPT2SAS_MAJOR_VERSION		07
+#define MPT2SAS_DRIVER_VERSION		"08.100.00.00"
+#define MPT2SAS_MAJOR_VERSION		08
 #define MPT2SAS_MINOR_VERSION		100
 #define MPT2SAS_BUILD_VERSION		00
 #define MPT2SAS_RELEASE_VERSION		00
@@ -101,7 +101,8 @@
 #define MPT_NAME_LENGTH			32	/* generic length of strings */
 #define MPT_STRING_LENGTH		64
 
-#define	MPT_MAX_CALLBACKS		16
+#define MPT_MAX_CALLBACKS		16
+
 
 #define	 CAN_SLEEP			1
 #define  NO_SLEEP			0
@@ -154,6 +155,20 @@
 #define MPT2SAS_DELL_6GBPS_SAS_SSDID               0x1F22
 
 /*
+ * Intel HBA branding
+ */
+#define MPT2SAS_INTEL_RMS2LL080_BRANDING	\
+				"Intel Integrated RAID Module RMS2LL080"
+#define MPT2SAS_INTEL_RMS2LL040_BRANDING	\
+				"Intel Integrated RAID Module RMS2LL040"
+
+/*
+ * Intel HBA SSDIDs
+ */
+#define MPT2SAS_INTEL_RMS2LL080_SSDID          0x350E
+#define MPT2SAS_INTEL_RMS2LL040_SSDID          0x350F
+
+/*
  * per target private data
  */
 #define MPT_TARGET_FLAGS_RAID_COMPONENT	0x01
@@ -431,14 +446,14 @@ struct chain_tracker {
 };
 
 /**
- * struct request_tracker - firmware request tracker
+ * struct scsiio_tracker - scsi mf request tracker
  * @smid: system message id
  * @scmd: scsi request pointer
  * @cb_idx: callback index
  * @chain_list: list of chains associated to this IO
  * @tracker_list: list of free request (ioc->free_list)
  */
-struct request_tracker {
+struct scsiio_tracker {
 	u16	smid;
 	struct scsi_cmnd *scmd;
 	u8	cb_idx;
@@ -447,6 +462,19 @@ struct request_tracker {
 };
 
 /**
+ * struct request_tracker - misc mf request tracker
+ * @smid: system message id
+ * @scmd: scsi request pointer
+ * @cb_idx: callback index
+ * @tracker_list: list of free request (ioc->free_list)
+ */
+struct request_tracker {
+	u16	smid;
+	u8	cb_idx;
+	struct list_head tracker_list;
+};
+
+/**
  * struct _tr_list - target reset list
  * @handle: device handle
  * @state: state machine
@@ -709,7 +737,7 @@ struct MPT2SAS_ADAPTER {
 	u8		*request;
 	dma_addr_t	request_dma;
 	u32		request_dma_sz;
-	struct request_tracker *scsi_lookup;
+	struct scsiio_tracker *scsi_lookup;
 	ulong		scsi_lookup_pages;
 	spinlock_t 	scsi_lookup_lock;
 	struct list_head free_list;
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 5ded3db6e316..6ceb7759bfe5 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -6975,7 +6975,6 @@ _scsih_suspend(struct pci_dev *pdev, pm_message_t state)
 	u32 device_state;
 
 	mpt2sas_base_stop_watchdog(ioc);
-	flush_scheduled_work();
 	scsi_block_requests(shost);
 	device_state = pci_choose_state(pdev, state);
 	printk(MPT2SAS_INFO_FMT "pdev=0x%p, slot=%s, entering "
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index b37c8a3c1bb0..86afb13f1e79 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -1005,11 +1005,23 @@ int osd_req_read_sg(struct osd_request *or,
 	const struct osd_sg_entry *sglist, unsigned numentries)
 {
 	u64 len;
-	int ret = _add_sg_continuation_descriptor(or, sglist, numentries, &len);
+	u64 off;
+	int ret;
 
-	if (ret)
-		return ret;
-	osd_req_read(or, obj, 0, bio, len);
+	if (numentries > 1) {
+		off = 0;
+		ret = _add_sg_continuation_descriptor(or, sglist, numentries,
+						      &len);
+		if (ret)
+			return ret;
+	} else {
+		/* Optimize the case of single segment, read_sg is a
+		 * bidi operation.
+		 */
+		len = sglist->len;
+		off = sglist->offset;
+	}
+	osd_req_read(or, obj, off, bio, len);
 
 	return 0;
 }
diff --git a/drivers/scsi/pm8001/pm8001_hwi.c b/drivers/scsi/pm8001/pm8001_hwi.c
index d8db0137c0c7..18b6c55cd08c 100644
--- a/drivers/scsi/pm8001/pm8001_hwi.c
+++ b/drivers/scsi/pm8001/pm8001_hwi.c
@@ -1382,53 +1382,50 @@ static u32 mpi_msg_consume(struct pm8001_hba_info *pm8001_ha,
 	return MPI_IO_STATUS_BUSY;
 }
 
-static void pm8001_work_queue(struct work_struct *work)
+static void pm8001_work_fn(struct work_struct *work)
 {
-	struct delayed_work *dw = container_of(work, struct delayed_work, work);
-	struct pm8001_wq *wq = container_of(dw, struct pm8001_wq, work_q);
+	struct pm8001_work *pw = container_of(work, struct pm8001_work, work);
 	struct pm8001_device *pm8001_dev;
-	struct domain_device	*dev;
+	struct domain_device *dev;
 
-	switch (wq->handler) {
+	switch (pw->handler) {
 	case IO_OPEN_CNX_ERROR_IT_NEXUS_LOSS:
-		pm8001_dev = wq->data;
+		pm8001_dev = pw->data;
 		dev = pm8001_dev->sas_device;
 		pm8001_I_T_nexus_reset(dev);
 		break;
 	case IO_OPEN_CNX_ERROR_STP_RESOURCES_BUSY:
-		pm8001_dev = wq->data;
+		pm8001_dev = pw->data;
 		dev = pm8001_dev->sas_device;
 		pm8001_I_T_nexus_reset(dev);
 		break;
 	case IO_DS_IN_ERROR:
-		pm8001_dev = wq->data;
+		pm8001_dev = pw->data;
 		dev = pm8001_dev->sas_device;
 		pm8001_I_T_nexus_reset(dev);
 		break;
 	case IO_DS_NON_OPERATIONAL:
-		pm8001_dev = wq->data;
+		pm8001_dev = pw->data;
 		dev = pm8001_dev->sas_device;
 		pm8001_I_T_nexus_reset(dev);
 		break;
 	}
-	list_del(&wq->entry);
-	kfree(wq);
+	kfree(pw);
 }
 
 static int pm8001_handle_event(struct pm8001_hba_info *pm8001_ha, void *data,
 			       int handler)
 {
-	struct pm8001_wq *wq;
+	struct pm8001_work *pw;
 	int ret = 0;
 
-	wq = kmalloc(sizeof(struct pm8001_wq), GFP_ATOMIC);
-	if (wq) {
-		wq->pm8001_ha = pm8001_ha;
-		wq->data = data;
-		wq->handler = handler;
-		INIT_DELAYED_WORK(&wq->work_q, pm8001_work_queue);
-		list_add_tail(&wq->entry, &pm8001_ha->wq_list);
-		schedule_delayed_work(&wq->work_q, 0);
+	pw = kmalloc(sizeof(struct pm8001_work), GFP_ATOMIC);
+	if (pw) {
+		pw->pm8001_ha = pm8001_ha;
+		pw->data = data;
+		pw->handler = handler;
+		INIT_WORK(&pw->work, pm8001_work_fn);
+		queue_work(pm8001_wq, &pw->work);
 	} else
 		ret = -ENOMEM;
 
diff --git a/drivers/scsi/pm8001/pm8001_init.c b/drivers/scsi/pm8001/pm8001_init.c
index b95285f3383f..002360da01e3 100644
--- a/drivers/scsi/pm8001/pm8001_init.c
+++ b/drivers/scsi/pm8001/pm8001_init.c
@@ -51,6 +51,8 @@ static int pm8001_id;
 
 LIST_HEAD(hba_list);
 
+struct workqueue_struct *pm8001_wq;
+
 /**
  * The main structure which LLDD must register for scsi core.
  */
@@ -134,7 +136,6 @@ static void __devinit pm8001_phy_init(struct pm8001_hba_info *pm8001_ha,
 static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 {
 	int i;
-	struct pm8001_wq *wq;
 
 	if (!pm8001_ha)
 		return;
@@ -150,8 +151,7 @@ static void pm8001_free(struct pm8001_hba_info *pm8001_ha)
 	PM8001_CHIP_DISP->chip_iounmap(pm8001_ha);
 	if (pm8001_ha->shost)
 		scsi_host_put(pm8001_ha->shost);
-	list_for_each_entry(wq, &pm8001_ha->wq_list, entry)
-		cancel_delayed_work(&wq->work_q);
+	flush_workqueue(pm8001_wq);
 	kfree(pm8001_ha->tags);
 	kfree(pm8001_ha);
 }
@@ -381,7 +381,6 @@ pm8001_pci_alloc(struct pci_dev *pdev, u32 chip_id, struct Scsi_Host *shost)
 	pm8001_ha->sas = sha;
 	pm8001_ha->shost = shost;
 	pm8001_ha->id = pm8001_id++;
-	INIT_LIST_HEAD(&pm8001_ha->wq_list);
 	pm8001_ha->logging_level = 0x01;
 	sprintf(pm8001_ha->name, "%s%d", DRV_NAME, pm8001_ha->id);
 #ifdef PM8001_USE_TASKLET
@@ -758,7 +757,7 @@ static int pm8001_pci_suspend(struct pci_dev *pdev, pm_message_t state)
 	int i , pos;
 	u32 device_state;
 	pm8001_ha = sha->lldd_ha;
-	flush_scheduled_work();
+	flush_workqueue(pm8001_wq);
 	scsi_block_requests(pm8001_ha->shost);
 	pos = pci_find_capability(pdev, PCI_CAP_ID_PM);
 	if (pos == 0) {
@@ -870,17 +869,26 @@ static struct pci_driver pm8001_pci_driver = {
  */
 static int __init pm8001_init(void)
 {
-	int rc;
+	int rc = -ENOMEM;
+
+	pm8001_wq = alloc_workqueue("pm8001", 0, 0);
+	if (!pm8001_wq)
+		goto err;
+
 	pm8001_id = 0;
 	pm8001_stt = sas_domain_attach_transport(&pm8001_transport_ops);
 	if (!pm8001_stt)
-		return -ENOMEM;
+		goto err_wq;
 	rc = pci_register_driver(&pm8001_pci_driver);
 	if (rc)
-		goto err_out;
+		goto err_tp;
 	return 0;
-err_out:
+
+err_tp:
 	sas_release_transport(pm8001_stt);
+err_wq:
+	destroy_workqueue(pm8001_wq);
+err:
 	return rc;
 }
 
@@ -888,6 +896,7 @@ static void __exit pm8001_exit(void)
 {
 	pci_unregister_driver(&pm8001_pci_driver);
 	sas_release_transport(pm8001_stt);
+	destroy_workqueue(pm8001_wq);
 }
 
 module_init(pm8001_init);
diff --git a/drivers/scsi/pm8001/pm8001_sas.h b/drivers/scsi/pm8001/pm8001_sas.h
index 7f064f9ca828..bdb6b27dedd6 100644
--- a/drivers/scsi/pm8001/pm8001_sas.h
+++ b/drivers/scsi/pm8001/pm8001_sas.h
@@ -50,6 +50,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/workqueue.h>
 #include <scsi/libsas.h>
 #include <scsi/scsi_tcq.h>
 #include <scsi/sas_ata.h>
@@ -379,18 +380,16 @@ struct pm8001_hba_info {
 #ifdef PM8001_USE_TASKLET
 	struct tasklet_struct	tasklet;
 #endif
-	struct list_head 	wq_list;
 	u32			logging_level;
 	u32			fw_status;
 	const struct firmware 	*fw_image;
 };
 
-struct pm8001_wq {
-	struct delayed_work work_q;
+struct pm8001_work {
+	struct work_struct work;
 	struct pm8001_hba_info *pm8001_ha;
 	void *data;
 	int handler;
-	struct list_head entry;
 };
 
 struct pm8001_fw_image_header {
@@ -460,6 +459,9 @@ struct fw_control_ex {
 	void			*param3;
 };
 
+/* pm8001 workqueue */
+extern struct workqueue_struct *pm8001_wq;
+
 /******************** function prototype *********************/
 int pm8001_tag_alloc(struct pm8001_hba_info *pm8001_ha, u32 *tag_out);
 void pm8001_tag_init(struct pm8001_hba_info *pm8001_ha);
diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c
index 321cf3ae8630..bcf858e88c64 100644
--- a/drivers/scsi/pmcraid.c
+++ b/drivers/scsi/pmcraid.c
@@ -5454,7 +5454,7 @@ static void __devexit pmcraid_remove(struct pci_dev *pdev)
 	pmcraid_shutdown(pdev);
 
 	pmcraid_disable_interrupts(pinstance, ~0);
-	flush_scheduled_work();
+	flush_work_sync(&pinstance->worker_q);
 
 	pmcraid_kill_tasklets(pinstance);
 	pmcraid_unregister_interrupt_handler(pinstance);
diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index ccfc8e78be21..6c51c0a35b9e 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2402,13 +2402,13 @@ struct qla_hw_data {
 	volatile struct {
 		uint32_t	mbox_int		:1;
 		uint32_t	mbox_busy		:1;
-
 		uint32_t	disable_risc_code_load	:1;
 		uint32_t	enable_64bit_addressing	:1;
 		uint32_t	enable_lip_reset	:1;
 		uint32_t	enable_target_reset	:1;
 		uint32_t	enable_lip_full_login	:1;
 		uint32_t	enable_led_scheme	:1;
+
 		uint32_t	msi_enabled		:1;
 		uint32_t	msix_enabled		:1;
 		uint32_t	disable_serdes		:1;
@@ -2417,6 +2417,7 @@ struct qla_hw_data {
 		uint32_t	pci_channel_io_perm_failure	:1;
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
+
 		uint32_t	chip_reset_done		:1;
 		uint32_t	port0			:1;
 		uint32_t	running_gold_fw		:1;
@@ -2424,9 +2425,11 @@ struct qla_hw_data {
 		uint32_t	cpu_affinity_enabled	:1;
 		uint32_t	disable_msix_handshake	:1;
 		uint32_t	fcp_prio_enabled	:1;
-		uint32_t	fw_hung	:1;
-		uint32_t        quiesce_owner:1;
+		uint32_t	isp82xx_fw_hung:1;
+
+		uint32_t	quiesce_owner:1;
 		uint32_t	thermal_supported:1;
+		uint32_t	isp82xx_reset_hdlr_active:1;
 		/* 26 bits */
 	} flags;
 
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
index 89e900adb679..d48326ee3f61 100644
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -565,6 +565,7 @@ extern int qla82xx_mbx_intr_enable(scsi_qla_host_t *);
 extern int qla82xx_mbx_intr_disable(scsi_qla_host_t *);
 extern void qla82xx_start_iocbs(srb_t *);
 extern int qla82xx_fcoe_ctx_reset(scsi_qla_host_t *);
+extern void qla82xx_chip_reset_cleanup(scsi_qla_host_t *);
 
 /* BSG related functions */
 extern int qla24xx_bsg_request(struct fc_bsg_job *);
diff --git a/drivers/scsi/qla2xxx/qla_gs.c b/drivers/scsi/qla2xxx/qla_gs.c
index 4c083928c2fb..74a91b6dfc68 100644
--- a/drivers/scsi/qla2xxx/qla_gs.c
+++ b/drivers/scsi/qla2xxx/qla_gs.c
@@ -121,8 +121,11 @@ qla2x00_chk_ms_status(scsi_qla_host_t *vha, ms_iocb_entry_t *ms_pkt,
 
 	rval = QLA_FUNCTION_FAILED;
 	if (ms_pkt->entry_status != 0) {
-		DEBUG2_3(printk("scsi(%ld): %s failed, error status (%x).\n",
-		    vha->host_no, routine, ms_pkt->entry_status));
+		DEBUG2_3(printk(KERN_WARNING "scsi(%ld): %s failed, error status "
+		    "(%x) on port_id: %02x%02x%02x.\n",
+		    vha->host_no, routine, ms_pkt->entry_status,
+		    vha->d_id.b.domain, vha->d_id.b.area,
+		    vha->d_id.b.al_pa));
 	} else {
 		if (IS_FWI2_CAPABLE(ha))
 			comp_status = le16_to_cpu(
@@ -136,8 +139,10 @@ qla2x00_chk_ms_status(scsi_qla_host_t *vha, ms_iocb_entry_t *ms_pkt,
 			if (ct_rsp->header.response !=
 			    __constant_cpu_to_be16(CT_ACCEPT_RESPONSE)) {
 				DEBUG2_3(printk("scsi(%ld): %s failed, "
-				    "rejected request:\n", vha->host_no,
-				    routine));
+				    "rejected request on port_id: %02x%02x%02x\n",
+				    vha->host_no, routine,
+				    vha->d_id.b.domain, vha->d_id.b.area,
+				    vha->d_id.b.al_pa));
 				DEBUG2_3(qla2x00_dump_buffer(
 				    (uint8_t *)&ct_rsp->header,
 				    sizeof(struct ct_rsp_hdr)));
@@ -147,8 +152,10 @@ qla2x00_chk_ms_status(scsi_qla_host_t *vha, ms_iocb_entry_t *ms_pkt,
 			break;
 		default:
 			DEBUG2_3(printk("scsi(%ld): %s failed, completion "
-			    "status (%x).\n", vha->host_no, routine,
-			    comp_status));
+			    "status (%x) on port_id: %02x%02x%02x.\n",
+			    vha->host_no, routine, comp_status,
+			    vha->d_id.b.domain, vha->d_id.b.area,
+			    vha->d_id.b.al_pa));
 			break;
 		}
 	}
@@ -1965,7 +1972,7 @@ qla2x00_gff_id(scsi_qla_host_t *vha, sw_info_t *list)
 			    "scsi(%ld): GFF_ID issue IOCB failed "
 			    "(%d).\n", vha->host_no, rval));
 		} else if (qla2x00_chk_ms_status(vha, ms_pkt, ct_rsp,
-			       "GPN_ID") != QLA_SUCCESS) {
+			       "GFF_ID") != QLA_SUCCESS) {
 			DEBUG2_3(printk(KERN_INFO
 			    "scsi(%ld): GFF_ID IOCB status had a "
 			    "failure status code\n", vha->host_no));
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index d9479c3fe5f8..8575808dbae0 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -1967,7 +1967,7 @@ qla2x00_fw_ready(scsi_qla_host_t *vha)
 		} else {
 			/* Mailbox cmd failed. Timeout on min_wait. */
 			if (time_after_eq(jiffies, mtime) ||
-			    (IS_QLA82XX(ha) && ha->flags.fw_hung))
+				ha->flags.isp82xx_fw_hung)
 				break;
 		}
 
@@ -3945,8 +3945,13 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	struct qla_hw_data *ha = vha->hw;
 	struct scsi_qla_host *vp;
 	unsigned long flags;
+	fc_port_t *fcport;
 
-	vha->flags.online = 0;
+	/* For ISP82XX, driver waits for completion of the commands.
+	 * online flag should be set.
+	 */
+	if (!IS_QLA82XX(ha))
+		vha->flags.online = 0;
 	ha->flags.chip_reset_done = 0;
 	clear_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 	ha->qla_stats.total_isp_aborts++;
@@ -3954,7 +3959,10 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 	qla_printk(KERN_INFO, ha,
 	    "Performing ISP error recovery - ha= %p.\n", ha);
 
-	/* Chip reset does not apply to 82XX */
+	/* For ISP82XX, reset_chip is just disabling interrupts.
+	 * Driver waits for the completion of the commands.
+	 * the interrupts need to be enabled.
+	 */
 	if (!IS_QLA82XX(ha))
 		ha->isp_ops->reset_chip(vha);
 
@@ -3980,14 +3988,31 @@ qla2x00_abort_isp_cleanup(scsi_qla_host_t *vha)
 			    LOOP_DOWN_TIME);
 	}
 
+	/* Clear all async request states across all VPs. */
+	list_for_each_entry(fcport, &vha->vp_fcports, list)
+		fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
+	spin_lock_irqsave(&ha->vport_slock, flags);
+	list_for_each_entry(vp, &ha->vp_list, list) {
+		atomic_inc(&vp->vref_count);
+		spin_unlock_irqrestore(&ha->vport_slock, flags);
+
+		list_for_each_entry(fcport, &vp->vp_fcports, list)
+			fcport->flags &= ~(FCF_LOGIN_NEEDED | FCF_ASYNC_SENT);
+
+		spin_lock_irqsave(&ha->vport_slock, flags);
+		atomic_dec(&vp->vref_count);
+	}
+	spin_unlock_irqrestore(&ha->vport_slock, flags);
+
 	if (!ha->flags.eeh_busy) {
 		/* Make sure for ISP 82XX IO DMA is complete */
 		if (IS_QLA82XX(ha)) {
-			if (qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
-				WAIT_HOST) == QLA_SUCCESS) {
-				DEBUG2(qla_printk(KERN_INFO, ha,
-				"Done wait for pending commands\n"));
-			}
+			qla82xx_chip_reset_cleanup(vha);
+
+			/* Done waiting for pending commands.
+			 * Reset the online flag.
+			 */
+			vha->flags.online = 0;
 		}
 
 		/* Requeue all commands in outstanding command list. */
diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c
index 4c1ba6263eb3..d78d5896fc33 100644
--- a/drivers/scsi/qla2xxx/qla_iocb.c
+++ b/drivers/scsi/qla2xxx/qla_iocb.c
@@ -328,6 +328,7 @@ qla2x00_start_scsi(srb_t *sp)
 	struct qla_hw_data *ha;
 	struct req_que *req;
 	struct rsp_que *rsp;
+	char		tag[2];
 
 	/* Setup device pointers. */
 	ret = 0;
@@ -406,7 +407,22 @@ qla2x00_start_scsi(srb_t *sp)
 	cmd_pkt->lun = cpu_to_le16(sp->cmd->device->lun);
 
 	/* Update tagged queuing modifier */
-	cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG);
+	if (scsi_populate_tag_msg(cmd, tag)) {
+		switch (tag[0]) {
+		case HEAD_OF_QUEUE_TAG:
+			cmd_pkt->control_flags =
+			    __constant_cpu_to_le16(CF_HEAD_TAG);
+			break;
+		case ORDERED_QUEUE_TAG:
+			cmd_pkt->control_flags =
+			    __constant_cpu_to_le16(CF_ORDERED_TAG);
+			break;
+		default:
+			cmd_pkt->control_flags =
+			    __constant_cpu_to_le16(CF_SIMPLE_TAG);
+			break;
+		}
+	}
 
 	/* Load SCSI command packet. */
 	memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len);
@@ -971,6 +987,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 	uint16_t		fcp_cmnd_len;
 	struct fcp_cmnd		*fcp_cmnd;
 	dma_addr_t		crc_ctx_dma;
+	char			tag[2];
 
 	cmd = sp->cmd;
 
@@ -1068,9 +1085,27 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt,
 	    LSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
 	cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
 	    MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
-	fcp_cmnd->task_attribute = 0;
 	fcp_cmnd->task_management = 0;
 
+	/*
+	 * Update tagged queuing modifier if using command tag queuing
+	 */
+	if (scsi_populate_tag_msg(cmd, tag)) {
+		switch (tag[0]) {
+		case HEAD_OF_QUEUE_TAG:
+		    fcp_cmnd->task_attribute = TSK_HEAD_OF_QUEUE;
+		    break;
+		case ORDERED_QUEUE_TAG:
+		    fcp_cmnd->task_attribute = TSK_ORDERED;
+		    break;
+		default:
+		    fcp_cmnd->task_attribute = 0;
+		    break;
+		}
+	} else {
+		fcp_cmnd->task_attribute = 0;
+	}
+
 	cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
 
 	DEBUG18(printk(KERN_INFO "%s(%ld): Total SG(s) Entries %d, Data"
@@ -1177,6 +1212,7 @@ qla24xx_start_scsi(srb_t *sp)
 	struct scsi_cmnd *cmd = sp->cmd;
 	struct scsi_qla_host *vha = sp->fcport->vha;
 	struct qla_hw_data *ha = vha->hw;
+	char		tag[2];
 
 	/* Setup device pointers. */
 	ret = 0;
@@ -1260,6 +1296,18 @@ qla24xx_start_scsi(srb_t *sp)
 	int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
 	host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
+	/* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */
+	if (scsi_populate_tag_msg(cmd, tag)) {
+		switch (tag[0]) {
+		case HEAD_OF_QUEUE_TAG:
+			cmd_pkt->task = TSK_HEAD_OF_QUEUE;
+			break;
+		case ORDERED_QUEUE_TAG:
+			cmd_pkt->task = TSK_ORDERED;
+			break;
+		}
+	}
+
 	/* Load SCSI command packet. */
 	memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
 	host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c
index e473e9fb363c..7a7c0ecfe7dd 100644
--- a/drivers/scsi/qla2xxx/qla_mbx.c
+++ b/drivers/scsi/qla2xxx/qla_mbx.c
@@ -71,6 +71,13 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
+	if (ha->flags.isp82xx_fw_hung) {
+		/* Setting Link-Down error */
+		mcp->mb[0] = MBS_LINK_DOWN_ERROR;
+		rval = QLA_FUNCTION_FAILED;
+		goto premature_exit;
+	}
+
 	/*
 	 * Wait for active mailbox commands to finish by waiting at most tov
 	 * seconds. This is to serialize actual issuing of mailbox cmds during
@@ -83,13 +90,6 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		return QLA_FUNCTION_TIMEOUT;
 	}
 
-	if (IS_QLA82XX(ha) && ha->flags.fw_hung) {
-		/* Setting Link-Down error */
-		mcp->mb[0] = MBS_LINK_DOWN_ERROR;
-		rval = QLA_FUNCTION_FAILED;
-		goto premature_exit;
-	}
-
 	ha->flags.mbox_busy = 1;
 	/* Save mailbox command for debug */
 	ha->mcp = mcp;
@@ -223,7 +223,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp)
 		ha->flags.mbox_int = 0;
 		clear_bit(MBX_INTERRUPT, &ha->mbx_cmd_flags);
 
-		if (IS_QLA82XX(ha) && ha->flags.fw_hung) {
+		if (ha->flags.isp82xx_fw_hung) {
 			ha->flags.mbox_busy = 0;
 			/* Setting Link-Down error */
 			mcp->mb[0] = MBS_LINK_DOWN_ERROR;
@@ -2462,22 +2462,19 @@ __qla24xx_issue_tmf(char *name, uint32_t type, struct fc_port *fcport,
 		    "-- completion status (%x).\n", __func__,
 		    vha->host_no, le16_to_cpu(sts->comp_status)));
 		rval = QLA_FUNCTION_FAILED;
-	} else if (!(le16_to_cpu(sts->scsi_status) &
-	    SS_RESPONSE_INFO_LEN_VALID)) {
-		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
-		    "-- no response info (%x).\n", __func__, vha->host_no,
-		    le16_to_cpu(sts->scsi_status)));
-		rval = QLA_FUNCTION_FAILED;
-	} else if (le32_to_cpu(sts->rsp_data_len) < 4) {
-		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
-		    "-- not enough response info (%d).\n", __func__,
-		    vha->host_no, le32_to_cpu(sts->rsp_data_len)));
-		rval = QLA_FUNCTION_FAILED;
-	} else if (sts->data[3]) {
-		DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
-		    "-- response (%x).\n", __func__,
-		    vha->host_no, sts->data[3]));
-		rval = QLA_FUNCTION_FAILED;
+	} else if (le16_to_cpu(sts->scsi_status) &
+	    SS_RESPONSE_INFO_LEN_VALID) {
+		if (le32_to_cpu(sts->rsp_data_len) < 4) {
+			DEBUG2_3_11(printk("%s(%ld): ignoring inconsistent "
+			    "data length -- not enough response info (%d).\n",
+			    __func__, vha->host_no,
+			    le32_to_cpu(sts->rsp_data_len)));
+		} else if (sts->data[3]) {
+			DEBUG2_3_11(printk("%s(%ld): failed to complete IOCB "
+			    "-- response (%x).\n", __func__,
+			    vha->host_no, sts->data[3]));
+			rval = QLA_FUNCTION_FAILED;
+		}
 	}
 
 	/* Issue marker IOCB. */
diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c
index fdb96a3584a5..76ec876e6b21 100644
--- a/drivers/scsi/qla2xxx/qla_nx.c
+++ b/drivers/scsi/qla2xxx/qla_nx.c
@@ -7,6 +7,7 @@
 #include "qla_def.h"
 #include <linux/delay.h>
 #include <linux/pci.h>
+#include <scsi/scsi_tcq.h>
 
 #define MASK(n)			((1ULL<<(n))-1)
 #define MN_WIN(addr) (((addr & 0x1fc0000) >> 1) | \
@@ -2547,7 +2548,7 @@ qla2xx_build_scsi_type_6_iocbs(srb_t *sp, struct cmd_type_6 *cmd_pkt,
 			dsd_seg = (uint32_t *)&cmd_pkt->fcp_data_dseg_address;
 			*dsd_seg++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*dsd_seg++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
-			*dsd_seg++ = dsd_list_len;
+			cmd_pkt->fcp_data_dseg_len = dsd_list_len;
 		} else {
 			*cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma));
 			*cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma));
@@ -2620,6 +2621,7 @@ qla82xx_start_scsi(srb_t *sp)
 	struct qla_hw_data *ha = vha->hw;
 	struct req_que *req = NULL;
 	struct rsp_que *rsp = NULL;
+	char		tag[2];
 
 	/* Setup device pointers. */
 	ret = 0;
@@ -2770,6 +2772,22 @@ sufficient_dsds:
 		int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun);
 		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
 
+		/*
+		 * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
+		 */
+		if (scsi_populate_tag_msg(cmd, tag)) {
+			switch (tag[0]) {
+			case HEAD_OF_QUEUE_TAG:
+				ctx->fcp_cmnd->task_attribute =
+				    TSK_HEAD_OF_QUEUE;
+				break;
+			case ORDERED_QUEUE_TAG:
+				ctx->fcp_cmnd->task_attribute =
+				    TSK_ORDERED;
+				break;
+			}
+		}
+
 		/* build FCP_CMND IU */
 		memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd));
 		int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun);
@@ -2835,6 +2853,20 @@ sufficient_dsds:
 		host_to_fcp_swap((uint8_t *)&cmd_pkt->lun,
 			sizeof(cmd_pkt->lun));
 
+		/*
+		 * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
+		 */
+		if (scsi_populate_tag_msg(cmd, tag)) {
+			switch (tag[0]) {
+			case HEAD_OF_QUEUE_TAG:
+				cmd_pkt->task = TSK_HEAD_OF_QUEUE;
+				break;
+			case ORDERED_QUEUE_TAG:
+				cmd_pkt->task = TSK_ORDERED;
+				break;
+			}
+		}
+
 		/* Load SCSI command packet. */
 		memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
 		host_to_fcp_swap(cmd_pkt->fcp_cdb, sizeof(cmd_pkt->fcp_cdb));
@@ -3457,46 +3489,28 @@ qla82xx_need_reset_handler(scsi_qla_host_t *vha)
 	}
 }
 
-static void
+int
 qla82xx_check_fw_alive(scsi_qla_host_t *vha)
 {
-	uint32_t fw_heartbeat_counter, halt_status;
-	struct qla_hw_data *ha = vha->hw;
+	uint32_t fw_heartbeat_counter;
+	int status = 0;
 
-	fw_heartbeat_counter = qla82xx_rd_32(ha, QLA82XX_PEG_ALIVE_COUNTER);
+	fw_heartbeat_counter = qla82xx_rd_32(vha->hw,
+		QLA82XX_PEG_ALIVE_COUNTER);
 	/* all 0xff, assume AER/EEH in progress, ignore */
 	if (fw_heartbeat_counter == 0xffffffff)
-		return;
+		return status;
 	if (vha->fw_heartbeat_counter == fw_heartbeat_counter) {
 		vha->seconds_since_last_heartbeat++;
 		/* FW not alive after 2 seconds */
 		if (vha->seconds_since_last_heartbeat == 2) {
 			vha->seconds_since_last_heartbeat = 0;
-			halt_status = qla82xx_rd_32(ha,
-				QLA82XX_PEG_HALT_STATUS1);
-			if (halt_status & HALT_STATUS_UNRECOVERABLE) {
-				set_bit(ISP_UNRECOVERABLE, &vha->dpc_flags);
-			} else {
-				qla_printk(KERN_INFO, ha,
-					"scsi(%ld): %s - detect abort needed\n",
-					vha->host_no, __func__);
-				set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
-			}
-			qla2xxx_wake_dpc(vha);
-			ha->flags.fw_hung = 1;
-			if (ha->flags.mbox_busy) {
-				ha->flags.mbox_int = 1;
-				DEBUG2(qla_printk(KERN_ERR, ha,
-					"Due to fw hung, doing premature "
-					"completion of mbx command\n"));
-				if (test_bit(MBX_INTR_WAIT,
-					&ha->mbx_cmd_flags))
-					complete(&ha->mbx_intr_comp);
-			}
+			status = 1;
 		}
 	} else
 		vha->seconds_since_last_heartbeat = 0;
 	vha->fw_heartbeat_counter = fw_heartbeat_counter;
+	return status;
 }
 
 /*
@@ -3557,6 +3571,8 @@ qla82xx_device_state_handler(scsi_qla_host_t *vha)
 			break;
 		case QLA82XX_DEV_NEED_RESET:
 			qla82xx_need_reset_handler(vha);
+			dev_init_timeout = jiffies +
+				(ha->nx_dev_init_timeout * HZ);
 			break;
 		case QLA82XX_DEV_NEED_QUIESCENT:
 			qla82xx_need_qsnt_handler(vha);
@@ -3596,30 +3612,18 @@ exit:
 
 void qla82xx_watchdog(scsi_qla_host_t *vha)
 {
-	uint32_t dev_state;
+	uint32_t dev_state, halt_status;
 	struct qla_hw_data *ha = vha->hw;
 
-	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
-
 	/* don't poll if reset is going on */
-	if (!(test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags) ||
-		test_bit(ABORT_ISP_ACTIVE, &vha->dpc_flags) ||
-		test_bit(ISP_ABORT_RETRY, &vha->dpc_flags))) {
-		if (dev_state == QLA82XX_DEV_NEED_RESET) {
+	if (!ha->flags.isp82xx_reset_hdlr_active) {
+		dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
+		if (dev_state == QLA82XX_DEV_NEED_RESET &&
+		    !test_bit(ISP_ABORT_NEEDED, &vha->dpc_flags)) {
 			qla_printk(KERN_WARNING, ha,
-				"%s(): Adapter reset needed!\n", __func__);
+			    "%s(): Adapter reset needed!\n", __func__);
 			set_bit(ISP_ABORT_NEEDED, &vha->dpc_flags);
 			qla2xxx_wake_dpc(vha);
-			ha->flags.fw_hung = 1;
-			if (ha->flags.mbox_busy) {
-				ha->flags.mbox_int = 1;
-				DEBUG2(qla_printk(KERN_ERR, ha,
-					"Need reset, doing premature "
-					"completion of mbx command\n"));
-				if (test_bit(MBX_INTR_WAIT,
-					&ha->mbx_cmd_flags))
-					complete(&ha->mbx_intr_comp);
-			}
 		} else if (dev_state == QLA82XX_DEV_NEED_QUIESCENT &&
 			!test_bit(ISP_QUIESCE_NEEDED, &vha->dpc_flags)) {
 			DEBUG(qla_printk(KERN_INFO, ha,
@@ -3629,6 +3633,31 @@ void qla82xx_watchdog(scsi_qla_host_t *vha)
 			qla2xxx_wake_dpc(vha);
 		} else {
 			qla82xx_check_fw_alive(vha);
+			if (qla82xx_check_fw_alive(vha)) {
+				halt_status = qla82xx_rd_32(ha,
+				    QLA82XX_PEG_HALT_STATUS1);
+				if (halt_status & HALT_STATUS_UNRECOVERABLE) {
+					set_bit(ISP_UNRECOVERABLE,
+					    &vha->dpc_flags);
+				} else {
+					qla_printk(KERN_INFO, ha,
+					    "scsi(%ld): %s - detect abort needed\n",
+					    vha->host_no, __func__);
+					set_bit(ISP_ABORT_NEEDED,
+					    &vha->dpc_flags);
+				}
+				qla2xxx_wake_dpc(vha);
+				ha->flags.isp82xx_fw_hung = 1;
+				if (ha->flags.mbox_busy) {
+					ha->flags.mbox_int = 1;
+					DEBUG2(qla_printk(KERN_ERR, ha,
+					    "Due to fw hung, doing premature "
+					    "completion of mbx command\n"));
+					if (test_bit(MBX_INTR_WAIT,
+					    &ha->mbx_cmd_flags))
+						complete(&ha->mbx_intr_comp);
+				}
+			}
 		}
 	}
 }
@@ -3663,6 +3692,7 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 			"Exiting.\n", __func__, vha->host_no);
 		return QLA_SUCCESS;
 	}
+	ha->flags.isp82xx_reset_hdlr_active = 1;
 
 	qla82xx_idc_lock(ha);
 	dev_state = qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE);
@@ -3683,7 +3713,8 @@ qla82xx_abort_isp(scsi_qla_host_t *vha)
 	qla82xx_idc_unlock(ha);
 
 	if (rval == QLA_SUCCESS) {
-		ha->flags.fw_hung = 0;
+		ha->flags.isp82xx_fw_hung = 0;
+		ha->flags.isp82xx_reset_hdlr_active = 0;
 		qla82xx_restart_isp(vha);
 	}
 
@@ -3791,3 +3822,71 @@ int qla2x00_wait_for_fcoe_ctx_reset(scsi_qla_host_t *vha)
 
 	return status;
 }
+
+void
+qla82xx_chip_reset_cleanup(scsi_qla_host_t *vha)
+{
+	int i;
+	unsigned long flags;
+	struct qla_hw_data *ha = vha->hw;
+
+	/* Check if 82XX firmware is alive or not
+	 * We may have arrived here from NEED_RESET
+	 * detection only
+	 */
+	if (!ha->flags.isp82xx_fw_hung) {
+		for (i = 0; i < 2; i++) {
+			msleep(1000);
+			if (qla82xx_check_fw_alive(vha)) {
+				ha->flags.isp82xx_fw_hung = 1;
+				if (ha->flags.mbox_busy) {
+					ha->flags.mbox_int = 1;
+					complete(&ha->mbx_intr_comp);
+				}
+				break;
+			}
+		}
+	}
+
+	/* Abort all commands gracefully if fw NOT hung */
+	if (!ha->flags.isp82xx_fw_hung) {
+		int cnt, que;
+		srb_t *sp;
+		struct req_que *req;
+
+		spin_lock_irqsave(&ha->hardware_lock, flags);
+		for (que = 0; que < ha->max_req_queues; que++) {
+			req = ha->req_q_map[que];
+			if (!req)
+				continue;
+			for (cnt = 1; cnt < MAX_OUTSTANDING_COMMANDS; cnt++) {
+				sp = req->outstanding_cmds[cnt];
+				if (sp) {
+					if (!sp->ctx ||
+					    (sp->flags & SRB_FCP_CMND_DMA_VALID)) {
+						spin_unlock_irqrestore(
+						    &ha->hardware_lock, flags);
+						if (ha->isp_ops->abort_command(sp)) {
+							qla_printk(KERN_INFO, ha,
+							    "scsi(%ld): mbx abort command failed in %s\n",
+							    vha->host_no, __func__);
+						} else {
+							qla_printk(KERN_INFO, ha,
+							    "scsi(%ld): mbx abort command success in %s\n",
+							    vha->host_no, __func__);
+						}
+						spin_lock_irqsave(&ha->hardware_lock, flags);
+					}
+				}
+			}
+		}
+		spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+		/* Wait for pending cmds (physical and virtual) to complete */
+		if (!qla2x00_eh_wait_for_pending_commands(vha, 0, 0,
+		    WAIT_HOST) == QLA_SUCCESS) {
+			DEBUG2(qla_printk(KERN_INFO, ha,
+			    "Done wait for pending commands\n"));
+		}
+	}
+}
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index f27724d76cf6..6c002fb6dd07 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -506,7 +506,7 @@ qla24xx_fw_version_str(struct scsi_qla_host *vha, char *str)
 
 static inline srb_t *
 qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
-    struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+	struct scsi_cmnd *cmd)
 {
 	srb_t *sp;
 	struct qla_hw_data *ha = vha->hw;
@@ -520,14 +520,13 @@ qla2x00_get_new_sp(scsi_qla_host_t *vha, fc_port_t *fcport,
 	sp->cmd = cmd;
 	sp->flags = 0;
 	CMD_SP(cmd) = (void *)sp;
-	cmd->scsi_done = done;
 	sp->ctx = NULL;
 
 	return sp;
 }
 
 static int
-qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
+qla2xxx_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
@@ -537,7 +536,6 @@ qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)
 	srb_t *sp;
 	int rval;
 
-	spin_unlock_irq(vha->host->host_lock);
 	if (ha->flags.eeh_busy) {
 		if (ha->flags.pci_channel_io_perm_failure)
 			cmd->result = DID_NO_CONNECT << 16;
@@ -569,40 +567,32 @@ qla2xxx_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *)
 		goto qc24_target_busy;
 	}
 
-	sp = qla2x00_get_new_sp(base_vha, fcport, cmd, done);
+	sp = qla2x00_get_new_sp(base_vha, fcport, cmd);
 	if (!sp)
-		goto qc24_host_busy_lock;
+		goto qc24_host_busy;
 
 	rval = ha->isp_ops->start_scsi(sp);
 	if (rval != QLA_SUCCESS)
 		goto qc24_host_busy_free_sp;
 
-	spin_lock_irq(vha->host->host_lock);
-
 	return 0;
 
 qc24_host_busy_free_sp:
 	qla2x00_sp_free_dma(sp);
 	mempool_free(sp, ha->srb_mempool);
 
-qc24_host_busy_lock:
-	spin_lock_irq(vha->host->host_lock);
+qc24_host_busy:
 	return SCSI_MLQUEUE_HOST_BUSY;
 
 qc24_target_busy:
-	spin_lock_irq(vha->host->host_lock);
 	return SCSI_MLQUEUE_TARGET_BUSY;
 
 qc24_fail_command:
-	spin_lock_irq(vha->host->host_lock);
-	done(cmd);
+	cmd->scsi_done(cmd);
 
 	return 0;
 }
 
-static DEF_SCSI_QCMD(qla2xxx_queuecommand)
-
-
 /*
  * qla2x00_eh_wait_on_command
  *    Waits for the command to be returned by the Firmware for some
@@ -821,17 +811,20 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd)
 {
 	scsi_qla_host_t *vha = shost_priv(cmd->device->host);
 	srb_t *sp;
-	int ret = SUCCESS;
+	int ret;
 	unsigned int id, lun;
 	unsigned long flags;
 	int wait = 0;
 	struct qla_hw_data *ha = vha->hw;
 
-	fc_block_scsi_eh(cmd);
-
 	if (!CMD_SP(cmd))
 		return SUCCESS;
 
+	ret = fc_block_scsi_eh(cmd);
+	if (ret != 0)
+		return ret;
+	ret = SUCCESS;
+
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
@@ -940,11 +933,13 @@ __qla2xxx_eh_generic_reset(char *name, enum nexus_wait_type type,
 	fc_port_t *fcport = (struct fc_port *) cmd->device->hostdata;
 	int err;
 
-	fc_block_scsi_eh(cmd);
-
 	if (!fcport)
 		return FAILED;
 
+	err = fc_block_scsi_eh(cmd);
+	if (err != 0)
+		return err;
+
 	qla_printk(KERN_INFO, vha->hw, "scsi(%ld:%d:%d): %s RESET ISSUED.\n",
 	    vha->host_no, cmd->device->id, cmd->device->lun, name);
 
@@ -1018,14 +1013,17 @@ qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
 	int ret = FAILED;
 	unsigned int id, lun;
 
-	fc_block_scsi_eh(cmd);
-
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
 	if (!fcport)
 		return ret;
 
+	ret = fc_block_scsi_eh(cmd);
+	if (ret != 0)
+		return ret;
+	ret = FAILED;
+
 	qla_printk(KERN_INFO, vha->hw,
 	    "scsi(%ld:%d:%d): BUS RESET ISSUED.\n", vha->host_no, id, lun);
 
@@ -1078,14 +1076,17 @@ qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
 	unsigned int id, lun;
 	scsi_qla_host_t *base_vha = pci_get_drvdata(ha->pdev);
 
-	fc_block_scsi_eh(cmd);
-
 	id = cmd->device->id;
 	lun = cmd->device->lun;
 
 	if (!fcport)
 		return ret;
 
+	ret = fc_block_scsi_eh(cmd);
+	if (ret != 0)
+		return ret;
+	ret = FAILED;
+
 	qla_printk(KERN_INFO, ha,
 	    "scsi(%ld:%d:%d): ADAPTER RESET ISSUED.\n", vha->host_no, id, lun);
 
@@ -3805,7 +3806,7 @@ qla2xxx_pci_error_detected(struct pci_dev *pdev, pci_channel_state_t state)
 		ha->flags.eeh_busy = 1;
 		/* For ISP82XX complete any pending mailbox cmd */
 		if (IS_QLA82XX(ha)) {
-			ha->flags.fw_hung = 1;
+			ha->flags.isp82xx_fw_hung = 1;
 			if (ha->flags.mbox_busy) {
 				ha->flags.mbox_int = 1;
 				DEBUG2(qla_printk(KERN_ERR, ha,
@@ -3945,7 +3946,7 @@ uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha)
 			qla82xx_wr_32(ha, QLA82XX_CRB_DEV_STATE,
 			    QLA82XX_DEV_READY);
 			qla82xx_idc_unlock(ha);
-			ha->flags.fw_hung = 0;
+			ha->flags.isp82xx_fw_hung = 0;
 			rval = qla82xx_restart_isp(base_vha);
 			qla82xx_idc_lock(ha);
 			/* Clear driver state register */
@@ -3958,7 +3959,7 @@ uint32_t qla82xx_error_recovery(scsi_qla_host_t *base_vha)
 		    "This devfn is not reset owner = 0x%x\n", ha->pdev->devfn));
 		if ((qla82xx_rd_32(ha, QLA82XX_CRB_DEV_STATE) ==
 		    QLA82XX_DEV_READY)) {
-			ha->flags.fw_hung = 0;
+			ha->flags.isp82xx_fw_hung = 0;
 			rval = qla82xx_restart_isp(base_vha);
 			qla82xx_idc_lock(ha);
 			qla82xx_set_drv_active(base_vha);
diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h
index cf0075a2d0c2..3a260c3f055a 100644
--- a/drivers/scsi/qla2xxx/qla_version.h
+++ b/drivers/scsi/qla2xxx/qla_version.h
@@ -7,9 +7,9 @@
 /*
  * Driver version
  */
-#define QLA2XXX_VERSION      "8.03.05-k0"
+#define QLA2XXX_VERSION      "8.03.07.00"
 
 #define QLA_DRIVER_MAJOR_VER	8
 #define QLA_DRIVER_MINOR_VER	3
-#define QLA_DRIVER_PATCH_VER	5
+#define QLA_DRIVER_PATCH_VER	7
 #define QLA_DRIVER_BETA_VER	0
diff --git a/drivers/scsi/scsi_devinfo.c b/drivers/scsi/scsi_devinfo.c
index 43fad4c09beb..82e9e5c0476e 100644
--- a/drivers/scsi/scsi_devinfo.c
+++ b/drivers/scsi/scsi_devinfo.c
@@ -382,6 +382,91 @@ int scsi_dev_info_list_add_keyed(int compatible, char *vendor, char *model,
 EXPORT_SYMBOL(scsi_dev_info_list_add_keyed);
 
 /**
+ * scsi_dev_info_list_del_keyed - remove one dev_info list entry.
+ * @vendor:	vendor string
+ * @model:	model (product) string
+ * @key:	specify list to use
+ *
+ * Description:
+ * 	Remove and destroy one dev_info entry for @vendor, @model
+ * 	in list specified by @key.
+ *
+ * Returns: 0 OK, -error on failure.
+ **/
+int scsi_dev_info_list_del_keyed(char *vendor, char *model, int key)
+{
+	struct scsi_dev_info_list *devinfo, *found = NULL;
+	struct scsi_dev_info_list_table *devinfo_table =
+		scsi_devinfo_lookup_by_key(key);
+
+	if (IS_ERR(devinfo_table))
+		return PTR_ERR(devinfo_table);
+
+	list_for_each_entry(devinfo, &devinfo_table->scsi_dev_info_list,
+			    dev_info_list) {
+		if (devinfo->compatible) {
+			/*
+			 * Behave like the older version of get_device_flags.
+			 */
+			size_t max;
+			/*
+			 * XXX why skip leading spaces? If an odd INQUIRY
+			 * value, that should have been part of the
+			 * scsi_static_device_list[] entry, such as "  FOO"
+			 * rather than "FOO". Since this code is already
+			 * here, and we don't know what device it is
+			 * trying to work with, leave it as-is.
+			 */
+			max = 8;	/* max length of vendor */
+			while ((max > 0) && *vendor == ' ') {
+				max--;
+				vendor++;
+			}
+			/*
+			 * XXX removing the following strlen() would be
+			 * good, using it means that for a an entry not in
+			 * the list, we scan every byte of every vendor
+			 * listed in scsi_static_device_list[], and never match
+			 * a single one (and still have to compare at
+			 * least the first byte of each vendor).
+			 */
+			if (memcmp(devinfo->vendor, vendor,
+				    min(max, strlen(devinfo->vendor))))
+				continue;
+			/*
+			 * Skip spaces again.
+			 */
+			max = 16;	/* max length of model */
+			while ((max > 0) && *model == ' ') {
+				max--;
+				model++;
+			}
+			if (memcmp(devinfo->model, model,
+				   min(max, strlen(devinfo->model))))
+				continue;
+			found = devinfo;
+		} else {
+			if (!memcmp(devinfo->vendor, vendor,
+				     sizeof(devinfo->vendor)) &&
+			     !memcmp(devinfo->model, model,
+				      sizeof(devinfo->model)))
+				found = devinfo;
+		}
+		if (found)
+			break;
+	}
+
+	if (found) {
+		list_del(&found->dev_info_list);
+		kfree(found);
+		return 0;
+	}
+
+	return -ENOENT;
+}
+EXPORT_SYMBOL(scsi_dev_info_list_del_keyed);
+
+/**
  * scsi_dev_info_list_add_str - parse dev_list and add to the scsi_dev_info_list.
  * @dev_list:	string of device flags to add
  *
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 45c75649b9e0..991de3c15cfc 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -223,7 +223,7 @@ static inline void scsi_eh_prt_fail_stats(struct Scsi_Host *shost,
  * @scmd:	Cmd to have sense checked.
  *
  * Return value:
- * 	SUCCESS or FAILED or NEEDS_RETRY
+ *	SUCCESS or FAILED or NEEDS_RETRY or TARGET_ERROR
  *
  * Notes:
  *	When a deferred error is detected the current command has
@@ -326,17 +326,19 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 		 */
 		return SUCCESS;
 
-		/* these three are not supported */
+		/* these are not supported */
 	case COPY_ABORTED:
 	case VOLUME_OVERFLOW:
 	case MISCOMPARE:
-		return SUCCESS;
+	case BLANK_CHECK:
+	case DATA_PROTECT:
+		return TARGET_ERROR;
 
 	case MEDIUM_ERROR:
 		if (sshdr.asc == 0x11 || /* UNRECOVERED READ ERR */
 		    sshdr.asc == 0x13 || /* AMNF DATA FIELD */
 		    sshdr.asc == 0x14) { /* RECORD NOT FOUND */
-			return SUCCESS;
+			return TARGET_ERROR;
 		}
 		return NEEDS_RETRY;
 
@@ -344,11 +346,9 @@ static int scsi_check_sense(struct scsi_cmnd *scmd)
 		if (scmd->device->retry_hwerror)
 			return ADD_TO_MLQUEUE;
 		else
-			return SUCCESS;
+			return TARGET_ERROR;
 
 	case ILLEGAL_REQUEST:
-	case BLANK_CHECK:
-	case DATA_PROTECT:
 	default:
 		return SUCCESS;
 	}
@@ -787,6 +787,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
 		case SUCCESS:
 		case NEEDS_RETRY:
 		case FAILED:
+		case TARGET_ERROR:
 			break;
 		case ADD_TO_MLQUEUE:
 			rtn = NEEDS_RETRY;
@@ -1469,6 +1470,14 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 		rtn = scsi_check_sense(scmd);
 		if (rtn == NEEDS_RETRY)
 			goto maybe_retry;
+		else if (rtn == TARGET_ERROR) {
+			/*
+			 * Need to modify host byte to signal a
+			 * permanent target failure
+			 */
+			scmd->result |= (DID_TARGET_FAILURE << 16);
+			rtn = SUCCESS;
+		}
 		/* if rtn == FAILED, we have no sense information;
 		 * returning FAILED will wake the error handler thread
 		 * to collect the sense and redo the decide
@@ -1486,6 +1495,7 @@ int scsi_decide_disposition(struct scsi_cmnd *scmd)
 	case RESERVATION_CONFLICT:
 		sdev_printk(KERN_INFO, scmd->device,
 			    "reservation conflict\n");
+		scmd->result |= (DID_NEXUS_FAILURE << 16);
 		return SUCCESS; /* causes immediate i/o error */
 	default:
 		return FAILED;
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 9045c52abd25..8d4ef8efa3cd 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -667,6 +667,30 @@ void scsi_release_buffers(struct scsi_cmnd *cmd)
 }
 EXPORT_SYMBOL(scsi_release_buffers);
 
+static int __scsi_error_from_host_byte(struct scsi_cmnd *cmd, int result)
+{
+	int error = 0;
+
+	switch(host_byte(result)) {
+	case DID_TRANSPORT_FAILFAST:
+		error = -ENOLINK;
+		break;
+	case DID_TARGET_FAILURE:
+		cmd->result |= (DID_OK << 16);
+		error = -EREMOTEIO;
+		break;
+	case DID_NEXUS_FAILURE:
+		cmd->result |= (DID_OK << 16);
+		error = -EBADE;
+		break;
+	default:
+		error = -EIO;
+		break;
+	}
+
+	return error;
+}
+
 /*
  * Function:    scsi_io_completion()
  *
@@ -737,7 +761,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 				req->sense_len = len;
 			}
 			if (!sense_deferred)
-				error = -EIO;
+				error = __scsi_error_from_host_byte(cmd, result);
 		}
 
 		req->resid_len = scsi_get_resid(cmd);
@@ -796,7 +820,7 @@ void scsi_io_completion(struct scsi_cmnd *cmd, unsigned int good_bytes)
 	if (scsi_end_request(cmd, error, good_bytes, result == 0) == NULL)
 		return;
 
-	error = -EIO;
+	error = __scsi_error_from_host_byte(cmd, result);
 
 	if (host_byte(result) == DID_RESET) {
 		/* Third party bus reset or reset for error recovery
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index b4056d14f812..9868afdb24e2 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -45,6 +45,7 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
 enum {
 	SCSI_DEVINFO_GLOBAL = 0,
 	SCSI_DEVINFO_SPI,
+	SCSI_DEVINFO_DH,
 };
 
 extern int scsi_get_device_flags(struct scsi_device *sdev,
@@ -56,6 +57,7 @@ extern int scsi_get_device_flags_keyed(struct scsi_device *sdev,
 extern int scsi_dev_info_list_add_keyed(int compatible, char *vendor,
 					char *model, char *strflags,
 					int flags, int key);
+extern int scsi_dev_info_list_del_keyed(char *vendor, char *model, int key);
 extern int scsi_dev_info_add_list(int key, const char *name);
 extern int scsi_dev_info_remove_list(int key);
 
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index f905ecb5704d..b4218390941e 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -954,6 +954,7 @@ iscsi_create_conn(struct iscsi_cls_session *session, int dd_size, uint32_t cid)
 	if (dd_size)
 		conn->dd_data = &conn[1];
 
+	mutex_init(&conn->ep_mutex);
 	INIT_LIST_HEAD(&conn->conn_list);
 	conn->transport = transport;
 	conn->cid = cid;
@@ -975,7 +976,6 @@ iscsi_create_conn(struct iscsi_cls_session *session, int dd_size, uint32_t cid)
 
 	spin_lock_irqsave(&connlock, flags);
 	list_add(&conn->conn_list, &connlist);
-	conn->active = 1;
 	spin_unlock_irqrestore(&connlock, flags);
 
 	ISCSI_DBG_TRANS_CONN(conn, "Completed conn creation\n");
@@ -1001,7 +1001,6 @@ int iscsi_destroy_conn(struct iscsi_cls_conn *conn)
 	unsigned long flags;
 
 	spin_lock_irqsave(&connlock, flags);
-	conn->active = 0;
 	list_del(&conn->conn_list);
 	spin_unlock_irqrestore(&connlock, flags);
 
@@ -1430,6 +1429,29 @@ release_host:
 	return err;
 }
 
+static int iscsi_if_ep_disconnect(struct iscsi_transport *transport,
+				  u64 ep_handle)
+{
+	struct iscsi_cls_conn *conn;
+	struct iscsi_endpoint *ep;
+
+	if (!transport->ep_disconnect)
+		return -EINVAL;
+
+	ep = iscsi_lookup_endpoint(ep_handle);
+	if (!ep)
+		return -EINVAL;
+	conn = ep->conn;
+	if (conn) {
+		mutex_lock(&conn->ep_mutex);
+		conn->ep = NULL;
+		mutex_unlock(&conn->ep_mutex);
+	}
+
+	transport->ep_disconnect(ep);
+	return 0;
+}
+
 static int
 iscsi_if_transport_ep(struct iscsi_transport *transport,
 		      struct iscsi_uevent *ev, int msg_type)
@@ -1454,14 +1476,8 @@ iscsi_if_transport_ep(struct iscsi_transport *transport,
 						   ev->u.ep_poll.timeout_ms);
 		break;
 	case ISCSI_UEVENT_TRANSPORT_EP_DISCONNECT:
-		if (!transport->ep_disconnect)
-			return -EINVAL;
-
-		ep = iscsi_lookup_endpoint(ev->u.ep_disconnect.ep_handle);
-		if (!ep)
-			return -EINVAL;
-
-		transport->ep_disconnect(ep);
+		rc = iscsi_if_ep_disconnect(transport,
+					    ev->u.ep_disconnect.ep_handle);
 		break;
 	}
 	return rc;
@@ -1609,12 +1625,31 @@ iscsi_if_recv_msg(struct sk_buff *skb, struct nlmsghdr *nlh, uint32_t *group)
 		session = iscsi_session_lookup(ev->u.b_conn.sid);
 		conn = iscsi_conn_lookup(ev->u.b_conn.sid, ev->u.b_conn.cid);
 
-		if (session && conn)
-			ev->r.retcode =	transport->bind_conn(session, conn,
-					ev->u.b_conn.transport_eph,
-					ev->u.b_conn.is_leading);
-		else
+		if (conn && conn->ep)
+			iscsi_if_ep_disconnect(transport, conn->ep->id);
+
+		if (!session || !conn) {
 			err = -EINVAL;
+			break;
+		}
+
+		ev->r.retcode =	transport->bind_conn(session, conn,
+						ev->u.b_conn.transport_eph,
+						ev->u.b_conn.is_leading);
+		if (ev->r.retcode || !transport->ep_connect)
+			break;
+
+		ep = iscsi_lookup_endpoint(ev->u.b_conn.transport_eph);
+		if (ep) {
+			ep->conn = conn;
+
+			mutex_lock(&conn->ep_mutex);
+			conn->ep = ep;
+			mutex_unlock(&conn->ep_mutex);
+		} else
+			iscsi_cls_conn_printk(KERN_ERR, conn,
+					      "Could not set ep conn "
+					      "binding\n");
 		break;
 	case ISCSI_UEVENT_SET_PARAM:
 		err = iscsi_set_param(transport, ev);
@@ -1747,13 +1782,48 @@ iscsi_conn_attr(data_digest, ISCSI_PARAM_DATADGST_EN);
 iscsi_conn_attr(ifmarker, ISCSI_PARAM_IFMARKER_EN);
 iscsi_conn_attr(ofmarker, ISCSI_PARAM_OFMARKER_EN);
 iscsi_conn_attr(persistent_port, ISCSI_PARAM_PERSISTENT_PORT);
-iscsi_conn_attr(port, ISCSI_PARAM_CONN_PORT);
 iscsi_conn_attr(exp_statsn, ISCSI_PARAM_EXP_STATSN);
 iscsi_conn_attr(persistent_address, ISCSI_PARAM_PERSISTENT_ADDRESS);
-iscsi_conn_attr(address, ISCSI_PARAM_CONN_ADDRESS);
 iscsi_conn_attr(ping_tmo, ISCSI_PARAM_PING_TMO);
 iscsi_conn_attr(recv_tmo, ISCSI_PARAM_RECV_TMO);
 
+#define iscsi_conn_ep_attr_show(param)					\
+static ssize_t show_conn_ep_param_##param(struct device *dev,		\
+					  struct device_attribute *attr,\
+					  char *buf)			\
+{									\
+	struct iscsi_cls_conn *conn = iscsi_dev_to_conn(dev->parent);	\
+	struct iscsi_transport *t = conn->transport;			\
+	struct iscsi_endpoint *ep;					\
+	ssize_t rc;							\
+									\
+	/*								\
+	 * Need to make sure ep_disconnect does not free the LLD's	\
+	 * interconnect resources while we are trying to read them.	\
+	 */								\
+	mutex_lock(&conn->ep_mutex);					\
+	ep = conn->ep;							\
+	if (!ep && t->ep_connect) {					\
+		mutex_unlock(&conn->ep_mutex);				\
+		return -ENOTCONN;					\
+	}								\
+									\
+	if (ep)								\
+		rc = t->get_ep_param(ep, param, buf);			\
+	else								\
+		rc = t->get_conn_param(conn, param, buf);		\
+	mutex_unlock(&conn->ep_mutex);					\
+	return rc;							\
+}
+
+#define iscsi_conn_ep_attr(field, param)				\
+	iscsi_conn_ep_attr_show(param)					\
+static ISCSI_CLASS_ATTR(conn, field, S_IRUGO,				\
+			show_conn_ep_param_##param, NULL);
+
+iscsi_conn_ep_attr(address, ISCSI_PARAM_CONN_ADDRESS);
+iscsi_conn_ep_attr(port, ISCSI_PARAM_CONN_PORT);
+
 /*
  * iSCSI session attrs
  */