summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorMatt Carlson <mcarlson@broadcom.com>2007-11-12 21:07:01 -0800
committerDavid S. Miller <davem@davemloft.net>2007-11-12 21:07:01 -0800
commitc88864df27590b80fca4a991e0c257d1757cec41 (patch)
treed9d2f437169fee2d45b4d051a84c1f47043645bc /drivers
parentbe85d4ad8ab69520e5ca4717c491a311c9eeae59 (diff)
[TG3]: Fix 5761 PXEboot crash
When 5761 devices boot the machine using PXEboot, PXE leaves the device active when it terminates. The tg3 driver has code to detect this condition and resets the device during initialization. On 5761 devices, device resets involve sending a driver state update message to the APE on the 5761. However, during this initialization stage, communications to the APE registers have not yet been set up. The driver then dereferences a NULL pointer and crashes the machine. The fix is to move the APE register access setup earlier in the initialization code to cover this condition. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/tg3.c46
1 files changed, 23 insertions, 23 deletions
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index cad519910767..ddeaa0c78305 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12464,6 +12464,28 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
goto err_out_iounmap;
}
+ if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
+ if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
+ printk(KERN_ERR PFX "Cannot find proper PCI device "
+ "base address for APE, aborting.\n");
+ err = -ENODEV;
+ goto err_out_iounmap;
+ }
+
+ tg3reg_base = pci_resource_start(pdev, 2);
+ tg3reg_len = pci_resource_len(pdev, 2);
+
+ tp->aperegs = ioremap_nocache(tg3reg_base, tg3reg_len);
+ if (tp->aperegs == 0UL) {
+ printk(KERN_ERR PFX "Cannot map APE registers, "
+ "aborting.\n");
+ err = -ENOMEM;
+ goto err_out_iounmap;
+ }
+
+ tg3_ape_lock_init(tp);
+ }
+
/*
* Reset chip in case UNDI or EFI driver did not shutdown
* DMA self test will enable WDMAC and we'll see (spurious)
@@ -12478,7 +12500,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
err = tg3_test_dma(tp);
if (err) {
printk(KERN_ERR PFX "DMA engine test failed, aborting.\n");
- goto err_out_iounmap;
+ goto err_out_apeunmap;
}
/* Tigon3 can do ipv4 only... and some chips have buggy
@@ -12501,28 +12523,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev,
tg3_init_coal(tp);
- if (tp->tg3_flags3 & TG3_FLG3_ENABLE_APE) {
- if (!(pci_resource_flags(pdev, 2) & IORESOURCE_MEM)) {
- printk(KERN_ERR PFX "Cannot find proper PCI device "
- "base address for APE, aborting.\n");
- err = -ENODEV;
- goto err_out_iounmap;
- }
-
- tg3reg_base = pci_resource_start(pdev, 2);
- tg3reg_len = pci_resource_len(pdev, 2);
-
- tp->aperegs = ioremap_nocache(tg3reg_base, tg3reg_len);
- if (tp->aperegs == 0UL) {
- printk(KERN_ERR PFX "Cannot map APE registers, "
- "aborting.\n");
- err = -ENOMEM;
- goto err_out_iounmap;
- }
-
- tg3_ape_lock_init(tp);
- }
-
pci_set_drvdata(pdev, dev);
err = register_netdev(dev);