summaryrefslogtreecommitdiff
path: root/drivers
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-12-12 23:31:58 +0100
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2007-12-12 23:31:58 +0100
commit3ab7efe8e2cbcca2d401b43cfcc2fa9a7dac2299 (patch)
tree7ddbb4d5fdae6f61d23ef0ba2a43aaca23bd2195 /drivers
parente11b9035a47da66fcd4bafd3a5f6b14f51ca667e (diff)
ide: DMA reporting and validity checking fixes (take 3)
* ide_xfer_verbose() fixups: - beautify returned mode names - fix PIO5 reporting - make it return 'const char *' * Change printk() level from KERN_DEBUG to KERN_INFO in ide_find_dma_mode(). * Add ide_id_dma_bug() helper based on ide_dma_verbose() to check for invalid DMA info in identify block. * Use ide_id_dma_bug() in ide_tune_dma() and ide_driveid_update(). As a result DMA won't be tuned or will be disabled after tuning if device reports inconsistent info about enabled DMA mode (ide_dma_verbose() does the same checks while the IDE device is probed by ide-{cd,disk} device driver). * Remove no longer needed ide_dma_verbose(). This patch should fix the following problem with out-of-sync IDE messages reported by Nick Warne: hdd: ATAPI 48X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache<7>hdd: skipping word 93 validity check , UDMA(66) and later debugged by Mark Lord to be caused by: ide_dma_verbose() printk( ... "2048kB Cache"); eighty_ninty_three() printk(KERN_DEBUG "%s: skipping word 93 validity check\n"); ide_dma_verbose() printk(", UDMA(66)" Please note that as a result ide-{cd,disk} device drivers won't report the DMA speed used but this is intended since now DMA mode being used is always reported by IDE core code. v2: * fixes suggested by Randy: - use KERN_CONT for printk()-s in ide-{cd,disk}.c - don't remove argument name from ide_xfer_verbose() declaration v3: * Remove incorrect check for (id->field_valid & 1) from ide_id_dma_bug() (spotted by Sergei). * "XFER SLOW" -> "PIO SLOW" in ide_xfer_verbose() (suggested by Sergei). * Fix ide_find_dma_mode() to report the correct mode ('mode' after being limited by 'req_mode'). Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Nick Warne <nick@ukfsn.org> Cc: Mark Lord <lkml@rtr.ca> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/ide/ide-cd.c7
-rw-r--r--drivers/ide/ide-disk.c7
-rw-r--r--drivers/ide/ide-dma.c60
-rw-r--r--drivers/ide/ide-iops.c3
-rw-r--r--drivers/ide/ide-lib.c55
5 files changed, 50 insertions, 82 deletions
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 57a5f63d6ae3..db9abd83d959 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -3049,12 +3049,7 @@ int ide_cdrom_probe_capabilities (ide_drive_t *drive)
else
printk(" drive");
- printk(", %dkB Cache", be16_to_cpu(cap.buffer_size));
-
- if (drive->using_dma)
- ide_dma_verbose(drive);
-
- printk("\n");
+ printk(KERN_CONT ", %dkB Cache\n", be16_to_cpu(cap.buffer_size));
return nslots;
}
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 00123d99527a..b77c849cdd28 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -961,11 +961,8 @@ static void idedisk_setup (ide_drive_t *drive)
if (id->buf_size)
printk (" w/%dKiB Cache", id->buf_size/2);
- printk(", CHS=%d/%d/%d",
- drive->bios_cyl, drive->bios_head, drive->bios_sect);
- if (drive->using_dma)
- ide_dma_verbose(drive);
- printk("\n");
+ printk(KERN_CONT ", CHS=%d/%d/%d\n",
+ drive->bios_cyl, drive->bios_head, drive->bios_sect);
/* write cache enabled? */
if ((id->csfo & 1) || (id->cfs_enable_1 & (1 << 5)))
diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c
index 0d795a1678c7..6879aaae544d 100644
--- a/drivers/ide/ide-dma.c
+++ b/drivers/ide/ide-dma.c
@@ -753,10 +753,12 @@ u8 ide_find_dma_mode(ide_drive_t *drive, u8 req_mode)
mode = XFER_MW_DMA_1;
}
- printk(KERN_DEBUG "%s: %s mode selected\n", drive->name,
+ mode = min(mode, req_mode);
+
+ printk(KERN_INFO "%s: %s mode selected\n", drive->name,
mode ? ide_xfer_verbose(mode) : "no DMA");
- return min(mode, req_mode);
+ return mode;
}
EXPORT_SYMBOL_GPL(ide_find_dma_mode);
@@ -772,6 +774,9 @@ static int ide_tune_dma(ide_drive_t *drive)
if (__ide_dma_bad_drive(drive))
return 0;
+ if (ide_id_dma_bug(drive))
+ return 0;
+
if (drive->hwif->host_flags & IDE_HFLAG_TRUST_BIOS_FOR_DMA)
return config_drive_for_dma(drive);
@@ -806,58 +811,23 @@ static int ide_dma_check(ide_drive_t *drive)
return vdma ? 0 : -1;
}
-void ide_dma_verbose(ide_drive_t *drive)
+int ide_id_dma_bug(ide_drive_t *drive)
{
- struct hd_driveid *id = drive->id;
- ide_hwif_t *hwif = HWIF(drive);
+ struct hd_driveid *id = drive->id;
if (id->field_valid & 4) {
if ((id->dma_ultra >> 8) && (id->dma_mword >> 8))
- goto bug_dma_off;
- if (id->dma_ultra & ((id->dma_ultra >> 8) & hwif->ultra_mask)) {
- if (((id->dma_ultra >> 11) & 0x1F) &&
- eighty_ninty_three(drive)) {
- if ((id->dma_ultra >> 15) & 1) {
- printk(", UDMA(mode 7)");
- } else if ((id->dma_ultra >> 14) & 1) {
- printk(", UDMA(133)");
- } else if ((id->dma_ultra >> 13) & 1) {
- printk(", UDMA(100)");
- } else if ((id->dma_ultra >> 12) & 1) {
- printk(", UDMA(66)");
- } else if ((id->dma_ultra >> 11) & 1) {
- printk(", UDMA(44)");
- } else
- goto mode_two;
- } else {
- mode_two:
- if ((id->dma_ultra >> 10) & 1) {
- printk(", UDMA(33)");
- } else if ((id->dma_ultra >> 9) & 1) {
- printk(", UDMA(25)");
- } else if ((id->dma_ultra >> 8) & 1) {
- printk(", UDMA(16)");
- }
- }
- } else {
- printk(", (U)DMA"); /* Can be BIOS-enabled! */
- }
+ goto err_out;
} else if (id->field_valid & 2) {
if ((id->dma_mword >> 8) && (id->dma_1word >> 8))
- goto bug_dma_off;
- printk(", DMA");
- } else if (id->field_valid & 1) {
- goto bug_dma_off;
+ goto err_out;
}
- return;
-bug_dma_off:
- printk(", BUG DMA OFF");
- hwif->dma_off_quietly(drive);
- return;
+ return 0;
+err_out:
+ printk(KERN_ERR "%s: bad DMA info in identify block\n", drive->name);
+ return 1;
}
-EXPORT_SYMBOL(ide_dma_verbose);
-
int ide_set_dma(ide_drive_t *drive)
{
ide_hwif_t *hwif = drive->hwif;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index 5c3256180ae5..cef405ddaf0e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -748,6 +748,9 @@ int ide_driveid_update(ide_drive_t *drive)
drive->id->dma_1word = id->dma_1word;
/* anything more ? */
kfree(id);
+
+ if (drive->using_dma && ide_id_dma_bug(drive))
+ ide_dma_off(drive);
}
return 1;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 1609b8604f56..062d3bcb2471 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -29,41 +29,44 @@
* Add common non I/O op stuff here. Make sure it has proper
* kernel-doc function headers or your patch will be rejected
*/
-
+
+static const char *udma_str[] =
+ { "UDMA/16", "UDMA/25", "UDMA/33", "UDMA/44",
+ "UDMA/66", "UDMA/100", "UDMA/133", "UDMA7" };
+static const char *mwdma_str[] =
+ { "MWDMA0", "MWDMA1", "MWDMA2" };
+static const char *swdma_str[] =
+ { "SWDMA0", "SWDMA1", "SWDMA2" };
+static const char *pio_str[] =
+ { "PIO0", "PIO1", "PIO2", "PIO3", "PIO4", "PIO5" };
/**
* ide_xfer_verbose - return IDE mode names
- * @xfer_rate: rate to name
+ * @mode: transfer mode
*
* Returns a constant string giving the name of the mode
* requested.
*/
-char *ide_xfer_verbose (u8 xfer_rate)
+const char *ide_xfer_verbose(u8 mode)
{
- switch(xfer_rate) {
- case XFER_UDMA_7: return("UDMA 7");
- case XFER_UDMA_6: return("UDMA 6");
- case XFER_UDMA_5: return("UDMA 5");
- case XFER_UDMA_4: return("UDMA 4");
- case XFER_UDMA_3: return("UDMA 3");
- case XFER_UDMA_2: return("UDMA 2");
- case XFER_UDMA_1: return("UDMA 1");
- case XFER_UDMA_0: return("UDMA 0");
- case XFER_MW_DMA_2: return("MW DMA 2");
- case XFER_MW_DMA_1: return("MW DMA 1");
- case XFER_MW_DMA_0: return("MW DMA 0");
- case XFER_SW_DMA_2: return("SW DMA 2");
- case XFER_SW_DMA_1: return("SW DMA 1");
- case XFER_SW_DMA_0: return("SW DMA 0");
- case XFER_PIO_4: return("PIO 4");
- case XFER_PIO_3: return("PIO 3");
- case XFER_PIO_2: return("PIO 2");
- case XFER_PIO_1: return("PIO 1");
- case XFER_PIO_0: return("PIO 0");
- case XFER_PIO_SLOW: return("PIO SLOW");
- default: return("XFER ERROR");
- }
+ const char *s;
+ u8 i = mode & 0xf;
+
+ if (mode >= XFER_UDMA_0 && mode <= XFER_UDMA_7)
+ s = udma_str[i];
+ else if (mode >= XFER_MW_DMA_0 && mode <= XFER_MW_DMA_2)
+ s = mwdma_str[i];
+ else if (mode >= XFER_SW_DMA_0 && mode <= XFER_SW_DMA_2)
+ s = swdma_str[i];
+ else if (mode >= XFER_PIO_0 && mode <= XFER_PIO_5)
+ s = pio_str[i & 0x7];
+ else if (mode == XFER_PIO_SLOW)
+ s = "PIO SLOW";
+ else
+ s = "XFER ERROR";
+
+ return s;
}
EXPORT_SYMBOL(ide_xfer_verbose);