Merge remote-tracking branch 'gpio/for-next'

Conflicts:
	drivers/gpio/gpiolib.c
	drivers/pinctrl/qcom/pinctrl-msm.c

3 files changed, 56 insertions, 2 deletions

diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index c5e41da20112..249db3057e4d 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -56,6 +56,8 @@ struct seq_file;
  *	as the chip access may sleep when e.g. reading out the IRQ status
  *	registers.
  * @exported: flags if the gpiochip is exported for use from sysfs. Private.
+ * @irq_not_threaded: flag must be set if @can_sleep is set but the
+ *	IRQs don't need to be threaded
  *
  * A gpio_chip can help platforms abstract various sources of GPIOs so
  * they can all be accessed through a common programing interface.
@@ -101,6 +103,7 @@ struct gpio_chip {
 	struct gpio_desc	*desc;
 	const char		*const *names;
 	bool			can_sleep;
+	bool			irq_not_threaded;
 	bool			exported;
 
 #ifdef CONFIG_GPIOLIB_IRQCHIP
@@ -141,7 +144,7 @@ extern const char *gpiochip_is_requested(struct gpio_chip *chip,
 
 /* add/remove chips */
 extern int gpiochip_add(struct gpio_chip *chip);
-extern int gpiochip_remove(struct gpio_chip *chip);
+extern void gpiochip_remove(struct gpio_chip *chip);
 extern struct gpio_chip *gpiochip_find(void *data,
 			      int (*match)(struct gpio_chip *chip, void *data));
 
@@ -166,7 +169,8 @@ int gpiochip_irqchip_add(struct gpio_chip *gpiochip,
 
 #endif /* CONFIG_GPIOLIB_IRQCHIP */
 
-int gpiochip_request_own_desc(struct gpio_desc *desc, const char *label);
+struct gpio_desc *gpiochip_request_own_desc(struct gpio_chip *chip, u16 hwnum,
+					    const char *label);
 void gpiochip_free_own_desc(struct gpio_desc *desc);
 
 #else /* CONFIG_GPIOLIB */
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
new file mode 100644
index 000000000000..28702c849af1
--- /dev/null
+++ b/include/linux/platform_data/gpio-dwapb.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright(c) 2014 Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef GPIO_DW_APB_H
+#define GPIO_DW_APB_H
+
+struct dwapb_port_property {
+	struct device_node *node;
+	const char	*name;
+	unsigned int	idx;
+	unsigned int	ngpio;
+	unsigned int	gpio_base;
+	unsigned int	irq;
+	bool		irq_shared;
+};
+
+struct dwapb_platform_data {
+	struct dwapb_port_property *properties;
+	unsigned int nports;
+};
+
+#endif
diff --git a/include/linux/spi/mcp23s08.h b/include/linux/spi/mcp23s08.h
index 2d676d5aaa89..aa07d7b32568 100644
--- a/include/linux/spi/mcp23s08.h
+++ b/include/linux/spi/mcp23s08.h
@@ -22,4 +22,22 @@ struct mcp23s08_platform_data {
 	 * base to base+15 (or base+31 for s17 variant).
 	 */
 	unsigned	base;
+	/* Marks the device as a interrupt controller.
+	 * NOTE: The interrupt functionality is only supported for i2c
+	 * versions of the chips. The spi chips can also do the interrupts,
+	 * but this is not supported by the linux driver yet.
+	 */
+	bool		irq_controller;
+
+	/* Sets the mirror flag in the IOCON register. Devices
+	 * with two interrupt outputs (these are the devices ending with 17 and
+	 * those that have 16 IOs) have two IO banks: IO 0-7 form bank 1 and
+	 * IO 8-15 are bank 2. These chips have two different interrupt outputs:
+	 * One for bank 1 and another for bank 2. If irq-mirror is set, both
+	 * interrupts are generated regardless of the bank that an input change
+	 * occurred on. If it is not set, the interrupt are only generated for
+	 * the bank they belong to.
+	 * On devices with only one interrupt output this property is useless.
+	 */
+	bool		mirror;
 };