Merge tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull ARM SoC driver updates from Arnd Bergmann:
 "These are updates for drivers that are tied to a particular SoC,
  including the correspondig device tree bindings:

   - A couple of reset controller changes for unisoc, uniphier, renesas
     and zte platforms

   - memory controller driver fixes for omap and tegra

   - Rockchip io domain driver updates

   - Lots of updates for qualcomm platforms, mostly touching their
     firmware and power management drivers

   - Tegra FUSE and firmware driver updateѕ

   - Support for virtio transports in the SCMI firmware framework

   - cleanup of ixp4xx drivers, towards enabling multiplatform support
     and bringing it up to date with modern platforms

   - Minor updates for keystone, mediatek, omap, renesas"

* tag 'drivers-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (96 commits)
  reset: simple: remove ZTE details in Kconfig help
  soc: rockchip: io-domain: Remove unneeded semicolon
  soc: rockchip: io-domain: add rk3568 support
  dt-bindings: power: add rk3568-pmu-io-domain support
  bus: ixp4xx: return on error in ixp4xx_exp_probe()
  soc: renesas: Prefer memcpy() over strcpy()
  firmware: tegra: Stop using seq_get_buf()
  soc/tegra: fuse: Enable fuse clock on suspend for Tegra124
  soc/tegra: fuse: Add runtime PM support
  soc/tegra: fuse: Clear fuse->clk on driver probe failure
  soc/tegra: pmc: Prevent racing with cpuilde driver
  soc/tegra: bpmp: Remove unused including <linux/version.h>
  dt-bindings: soc: ti: pruss: Add dma-coherent property
  soc: ti: Remove pm_runtime_irq_safe() usage for smartreflex
  soc: ti: pruss: Enable support for ICSSG subsystems on K3 AM64x SoCs
  dt-bindings: soc: ti: pruss: Update bindings for K3 AM64x SoCs
  firmware: arm_scmi: Use WARN_ON() to check configured transports
  firmware: arm_scmi: Fix boolconv.cocci warnings
  soc: mediatek: mmsys: Fix missing UFOE component in mt8173 table routing
  soc: mediatek: mmsys: add MT8365 support
  ...

4 files changed, 22 insertions, 6 deletions

diff --git a/include/linux/omap-gpmc.h b/include/linux/omap-gpmc.h
index b7bf735960c2..082841908fe7 100644
--- a/include/linux/omap-gpmc.h
+++ b/include/linux/omap-gpmc.h
@@ -81,9 +81,6 @@ extern int gpmc_configure(int cmd, int wval);
 extern void gpmc_read_settings_dt(struct device_node *np,
 				  struct gpmc_settings *p);
 
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-
 struct gpmc_timings;
 struct omap_nand_platform_data;
 struct omap_onenand_platform_data;
diff --git a/include/linux/platform_data/pata_ixp4xx_cf.h b/include/linux/platform_data/pata_ixp4xx_cf.h
index 601ba97fef57..e60fa41da4a5 100644
--- a/include/linux/platform_data/pata_ixp4xx_cf.h
+++ b/include/linux/platform_data/pata_ixp4xx_cf.h
@@ -14,8 +14,8 @@ struct ixp4xx_pata_data {
 	volatile u32	*cs1_cfg;
 	unsigned long	cs0_bits;
 	unsigned long	cs1_bits;
-	void __iomem	*cs0;
-	void __iomem	*cs1;
+	void __iomem	*cmd;
+	void __iomem	*ctl;
 };
 
 #endif
diff --git a/include/linux/power/smartreflex.h b/include/linux/power/smartreflex.h
index 971c9264179e..167b9b040091 100644
--- a/include/linux/power/smartreflex.h
+++ b/include/linux/power/smartreflex.h
@@ -155,6 +155,7 @@ struct omap_sr {
 	struct voltagedomain		*voltdm;
 	struct dentry			*dbg_dir;
 	unsigned int			irq;
+	struct clk			*fck;
 	int				srid;
 	int				ip_type;
 	int				nvalue_count;
@@ -169,6 +170,7 @@ struct omap_sr {
 	u32				senp_mod;
 	u32				senn_mod;
 	void __iomem			*base;
+	unsigned long			enabled:1;
 };
 
 /**
diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h
index 7c811eebcaab..f5672785c0c4 100644
--- a/include/linux/qcom-geni-se.h
+++ b/include/linux/qcom-geni-se.h
@@ -8,11 +8,24 @@
 
 #include <linux/interconnect.h>
 
-/* Transfer mode supported by GENI Serial Engines */
+/**
+ * enum geni_se_xfer_mode: Transfer modes supported by Serial Engines
+ *
+ * @GENI_SE_INVALID: Invalid mode
+ * @GENI_SE_FIFO: FIFO mode. Data is transferred with SE FIFO
+ * by programmed IO method
+ * @GENI_SE_DMA: Serial Engine DMA mode. Data is transferred
+ * with SE by DMAengine internal to SE
+ * @GENI_GPI_DMA: GPI DMA mode. Data is transferred using a DMAengine
+ * configured by a firmware residing on a GSI engine. This DMA name is
+ * interchangeably used as GSI or GPI which seem to imply the same DMAengine
+ */
+
 enum geni_se_xfer_mode {
 	GENI_SE_INVALID,
 	GENI_SE_FIFO,
 	GENI_SE_DMA,
+	GENI_GPI_DMA,
 };
 
 /* Protocols supported by GENI Serial Engines */
@@ -63,6 +76,7 @@ struct geni_se {
 #define SE_GENI_STATUS			0x40
 #define GENI_SER_M_CLK_CFG		0x48
 #define GENI_SER_S_CLK_CFG		0x4c
+#define GENI_IF_DISABLE_RO		0x64
 #define GENI_FW_REVISION_RO		0x68
 #define SE_GENI_CLK_SEL			0x7c
 #define SE_GENI_DMA_MODE_EN		0x258
@@ -105,6 +119,9 @@ struct geni_se {
 #define CLK_DIV_MSK			GENMASK(15, 4)
 #define CLK_DIV_SHFT			4
 
+/* GENI_IF_DISABLE_RO fields */
+#define FIFO_IF_DISABLE			(BIT(0))
+
 /* GENI_FW_REVISION_RO fields */
 #define FW_REV_PROTOCOL_MSK		GENMASK(15, 8)
 #define FW_REV_PROTOCOL_SHFT		8