Merge tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply

Pull power supply and reset updates from Sebastian Reichel:
 "battery/charger driver changes:
   - core:
      - provide function stubs if CONFIG_POWER_SUPPLY=n
      - reduce loglevel for probe defer info
   - surface:
      - new battery and charger drivers for Surface
   - bq27xxx:
      - add bq78z100 support
      - fix current_now/power_avg for newer chips
   - cw2015:
      - add CHARGE_NOW support
   - ab8500:
      - drop pdata support
   - convert most DT bindings to YAML
   - lots of minor fixes and cleanups

  reset drivers:
   - ltc2952-poweroff:
      - make trigger delay configurable from DT
   - minor fixes and cleanups"

* tag 'for-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (97 commits)
  power: supply: cpcap-battery: fix invalid usage of list cursor
  power: supply: bq256xx: add kerneldoc for structure members
  power: supply: act8945a: correct kerneldoc
  power: supply: max17040: remove unneeded double cast
  power: supply: max17040: handle device_property_read_u8_array() failure
  power: supply: max14577: remove unneeded variable initialization
  power: supply: surface-charger: Make symbol 'surface_ac_pm_ops' static
  power: supply: surface-battery: Make some symbols static
  power: reset: restart-poweroff: Add missing MODULE_DEVICE_TABLE
  power: reset: hisi-reboot: add missing MODULE_DEVICE_TABLE
  power: supply: s3c_adc_battery: fix possible use-after-free in s3c_adc_bat_remove()
  power: supply: generic-adc-battery: fix possible use-after-free in gab_remove()
  power: supply: Add AC driver for Surface Aggregator Module
  power: supply: Add battery driver for Surface Aggregator Module
  power: supply: bq25980: Move props from battery node
  power: supply: core: Use true and false for bool variable
  power: supply: goldfish: Remove the GOLDFISH dependency
  power: reset: ltc2952: make trigger delay configurable
  power: supply: cpcap-charger: Simplify bool conversion
  power: supply: cpcap-charger: Add usleep to cpcap charger to avoid usb plug bounce
  ...

5 files changed, 11 insertions, 808 deletions

diff --git a/include/linux/mfd/abx500.h b/include/linux/mfd/abx500.h
index 23040b6f1615..7f07cfe44753 100644
--- a/include/linux/mfd/abx500.h
+++ b/include/linux/mfd/abx500.h
@@ -28,282 +28,6 @@ struct abx500_init_settings {
 	u8 setting;
 };
 
-/* Battery driver related data */
-/*
- * ADC for the battery thermistor.
- * When using the ABx500_ADC_THERM_BATCTRL the battery ID resistor is combined
- * with a NTC resistor to both identify the battery and to measure its
- * temperature. Different phone manufactures uses different techniques to both
- * identify the battery and to read its temperature.
- */
-enum abx500_adc_therm {
-	ABx500_ADC_THERM_BATCTRL,
-	ABx500_ADC_THERM_BATTEMP,
-};
-
-/**
- * struct abx500_res_to_temp - defines one point in a temp to res curve. To
- * be used in battery packs that combines the identification resistor with a
- * NTC resistor.
- * @temp:			battery pack temperature in Celsius
- * @resist:			NTC resistor net total resistance
- */
-struct abx500_res_to_temp {
-	int temp;
-	int resist;
-};
-
-/**
- * struct abx500_v_to_cap - Table for translating voltage to capacity
- * @voltage:		Voltage in mV
- * @capacity:		Capacity in percent
- */
-struct abx500_v_to_cap {
-	int voltage;
-	int capacity;
-};
-
-/* Forward declaration */
-struct abx500_fg;
-
-/**
- * struct abx500_fg_parameters - Fuel gauge algorithm parameters, in seconds
- * if not specified
- * @recovery_sleep_timer:	Time between measurements while recovering
- * @recovery_total_time:	Total recovery time
- * @init_timer:			Measurement interval during startup
- * @init_discard_time:		Time we discard voltage measurement at startup
- * @init_total_time:		Total init time during startup
- * @high_curr_time:		Time current has to be high to go to recovery
- * @accu_charging:		FG accumulation time while charging
- * @accu_high_curr:		FG accumulation time in high current mode
- * @high_curr_threshold:	High current threshold, in mA
- * @lowbat_threshold:		Low battery threshold, in mV
- * @overbat_threshold:		Over battery threshold, in mV
- * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
- *				Resolution in 50 mV step.
- * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
- *				Resolution in 50 mV step.
- * @user_cap_limit		Capacity reported from user must be within this
- *				limit to be considered as sane, in percentage
- *				points.
- * @maint_thres			This is the threshold where we stop reporting
- *				battery full while in maintenance, in per cent
- * @pcut_enable:			Enable power cut feature in ab8505
- * @pcut_max_time:		Max time threshold
- * @pcut_flag_time:		Flagtime threshold
- * @pcut_max_restart:		Max number of restarts
- * @pcut_debounce_time:		Sets battery debounce time
- */
-struct abx500_fg_parameters {
-	int recovery_sleep_timer;
-	int recovery_total_time;
-	int init_timer;
-	int init_discard_time;
-	int init_total_time;
-	int high_curr_time;
-	int accu_charging;
-	int accu_high_curr;
-	int high_curr_threshold;
-	int lowbat_threshold;
-	int overbat_threshold;
-	int battok_falling_th_sel0;
-	int battok_raising_th_sel1;
-	int user_cap_limit;
-	int maint_thres;
-	bool pcut_enable;
-	u8 pcut_max_time;
-	u8 pcut_flag_time;
-	u8 pcut_max_restart;
-	u8 pcut_debounce_time;
-};
-
-/**
- * struct abx500_charger_maximization - struct used by the board config.
- * @use_maxi:		Enable maximization for this battery type
- * @maxi_chg_curr:	Maximum charger current allowed
- * @maxi_wait_cycles:	cycles to wait before setting charger current
- * @charger_curr_step	delta between two charger current settings (mA)
- */
-struct abx500_maxim_parameters {
-	bool ena_maxi;
-	int chg_curr;
-	int wait_cycles;
-	int charger_curr_step;
-};
-
-/**
- * struct abx500_battery_type - different batteries supported
- * @name:			battery technology
- * @resis_high:			battery upper resistance limit
- * @resis_low:			battery lower resistance limit
- * @charge_full_design:		Maximum battery capacity in mAh
- * @nominal_voltage:		Nominal voltage of the battery in mV
- * @termination_vol:		max voltage upto which battery can be charged
- * @termination_curr		battery charging termination current in mA
- * @recharge_cap		battery capacity limit that will trigger a new
- *				full charging cycle in the case where maintenan-
- *				-ce charging has been disabled
- * @normal_cur_lvl:		charger current in normal state in mA
- * @normal_vol_lvl:		charger voltage in normal state in mV
- * @maint_a_cur_lvl:		charger current in maintenance A state in mA
- * @maint_a_vol_lvl:		charger voltage in maintenance A state in mV
- * @maint_a_chg_timer_h:	charge time in maintenance A state
- * @maint_b_cur_lvl:		charger current in maintenance B state in mA
- * @maint_b_vol_lvl:		charger voltage in maintenance B state in mV
- * @maint_b_chg_timer_h:	charge time in maintenance B state
- * @low_high_cur_lvl:		charger current in temp low/high state in mA
- * @low_high_vol_lvl:		charger voltage in temp low/high state in mV'
- * @battery_resistance:		battery inner resistance in mOhm.
- * @n_r_t_tbl_elements:		number of elements in r_to_t_tbl
- * @r_to_t_tbl:			table containing resistance to temp points
- * @n_v_cap_tbl_elements:	number of elements in v_to_cap_tbl
- * @v_to_cap_tbl:		Voltage to capacity (in %) table
- * @n_batres_tbl_elements	number of elements in the batres_tbl
- * @batres_tbl			battery internal resistance vs temperature table
- */
-struct abx500_battery_type {
-	int name;
-	int resis_high;
-	int resis_low;
-	int charge_full_design;
-	int nominal_voltage;
-	int termination_vol;
-	int termination_curr;
-	int recharge_cap;
-	int normal_cur_lvl;
-	int normal_vol_lvl;
-	int maint_a_cur_lvl;
-	int maint_a_vol_lvl;
-	int maint_a_chg_timer_h;
-	int maint_b_cur_lvl;
-	int maint_b_vol_lvl;
-	int maint_b_chg_timer_h;
-	int low_high_cur_lvl;
-	int low_high_vol_lvl;
-	int battery_resistance;
-	int n_temp_tbl_elements;
-	const struct abx500_res_to_temp *r_to_t_tbl;
-	int n_v_cap_tbl_elements;
-	const struct abx500_v_to_cap *v_to_cap_tbl;
-	int n_batres_tbl_elements;
-	const struct batres_vs_temp *batres_tbl;
-};
-
-/**
- * struct abx500_bm_capacity_levels - abx500 capacity level data
- * @critical:		critical capacity level in percent
- * @low:		low capacity level in percent
- * @normal:		normal capacity level in percent
- * @high:		high capacity level in percent
- * @full:		full capacity level in percent
- */
-struct abx500_bm_capacity_levels {
-	int critical;
-	int low;
-	int normal;
-	int high;
-	int full;
-};
-
-/**
- * struct abx500_bm_charger_parameters - Charger specific parameters
- * @usb_volt_max:	maximum allowed USB charger voltage in mV
- * @usb_curr_max:	maximum allowed USB charger current in mA
- * @ac_volt_max:	maximum allowed AC charger voltage in mV
- * @ac_curr_max:	maximum allowed AC charger current in mA
- */
-struct abx500_bm_charger_parameters {
-	int usb_volt_max;
-	int usb_curr_max;
-	int ac_volt_max;
-	int ac_curr_max;
-};
-
-/**
- * struct abx500_bm_data - abx500 battery management data
- * @temp_under		under this temp, charging is stopped
- * @temp_low		between this temp and temp_under charging is reduced
- * @temp_high		between this temp and temp_over charging is reduced
- * @temp_over		over this temp, charging is stopped
- * @temp_now		present battery temperature
- * @temp_interval_chg	temperature measurement interval in s when charging
- * @temp_interval_nochg	temperature measurement interval in s when not charging
- * @main_safety_tmr_h	safety timer for main charger
- * @usb_safety_tmr_h	safety timer for usb charger
- * @bkup_bat_v		voltage which we charge the backup battery with
- * @bkup_bat_i		current which we charge the backup battery with
- * @no_maintenance	indicates that maintenance charging is disabled
- * @capacity_scaling    indicates whether capacity scaling is to be used
- * @abx500_adc_therm	placement of thermistor, batctrl or battemp adc
- * @chg_unknown_bat	flag to enable charging of unknown batteries
- * @enable_overshoot	flag to enable VBAT overshoot control
- * @auto_trig		flag to enable auto adc trigger
- * @fg_res		resistance of FG resistor in 0.1mOhm
- * @n_btypes		number of elements in array bat_type
- * @batt_id		index of the identified battery in array bat_type
- * @interval_charging	charge alg cycle period time when charging (sec)
- * @interval_not_charging charge alg cycle period time when not charging (sec)
- * @temp_hysteresis	temperature hysteresis
- * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
- * @n_chg_out_curr		number of elements in array chg_output_curr
- * @n_chg_in_curr		number of elements in array chg_input_curr
- * @chg_output_curr	charger output current level map
- * @chg_input_curr		charger input current level map
- * @maxi		maximization parameters
- * @cap_levels		capacity in percent for the different capacity levels
- * @bat_type		table of supported battery types
- * @chg_params		charger parameters
- * @fg_params		fuel gauge parameters
- */
-struct abx500_bm_data {
-	int temp_under;
-	int temp_low;
-	int temp_high;
-	int temp_over;
-	int temp_now;
-	int temp_interval_chg;
-	int temp_interval_nochg;
-	int main_safety_tmr_h;
-	int usb_safety_tmr_h;
-	int bkup_bat_v;
-	int bkup_bat_i;
-	bool autopower_cfg;
-	bool ac_enabled;
-	bool usb_enabled;
-	bool no_maintenance;
-	bool capacity_scaling;
-	bool chg_unknown_bat;
-	bool enable_overshoot;
-	bool auto_trig;
-	enum abx500_adc_therm adc_therm;
-	int fg_res;
-	int n_btypes;
-	int batt_id;
-	int interval_charging;
-	int interval_not_charging;
-	int temp_hysteresis;
-	int gnd_lift_resistance;
-	int n_chg_out_curr;
-	int n_chg_in_curr;
-	int *chg_output_curr;
-	int *chg_input_curr;
-	const struct abx500_maxim_parameters *maxi;
-	const struct abx500_bm_capacity_levels *cap_levels;
-	struct abx500_battery_type *bat_type;
-	const struct abx500_bm_charger_parameters *chg_params;
-	const struct abx500_fg_parameters *fg_params;
-};
-
-enum {
-	NTC_EXTERNAL = 0,
-	NTC_INTERNAL,
-};
-
-int ab8500_bm_of_probe(struct device *dev,
-		       struct device_node *np,
-		       struct abx500_bm_data *bm);
-
 int abx500_set_register_interruptible(struct device *dev, u8 bank, u8 reg,
 	u8 value);
 int abx500_get_register_interruptible(struct device *dev, u8 bank, u8 reg,
diff --git a/include/linux/mfd/abx500/ab8500-bm.h b/include/linux/mfd/abx500/ab8500-bm.h
deleted file mode 100644
index 903e94c189d8..000000000000
--- a/include/linux/mfd/abx500/ab8500-bm.h
+++ /dev/null
@@ -1,476 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright ST-Ericsson 2012.
- *
- * Author: Arun Murthy <arun.murthy@stericsson.com>
- */
-
-#ifndef _AB8500_BM_H
-#define _AB8500_BM_H
-
-#include <linux/kernel.h>
-#include <linux/mfd/abx500.h>
-
-/*
- * System control 2 register offsets.
- * bank = 0x02
- */
-#define AB8500_MAIN_WDOG_CTRL_REG	0x01
-#define AB8500_LOW_BAT_REG		0x03
-#define AB8500_BATT_OK_REG		0x04
-/*
- * USB/ULPI register offsets
- * Bank : 0x5
- */
-#define AB8500_USB_LINE_STAT_REG	0x80
-#define AB8500_USB_LINE_CTRL2_REG	0x82
-#define AB8500_USB_LINK1_STAT_REG	0x94
-
-/*
- * Charger / status register offfsets
- * Bank : 0x0B
- */
-#define AB8500_CH_STATUS1_REG		0x00
-#define AB8500_CH_STATUS2_REG		0x01
-#define AB8500_CH_USBCH_STAT1_REG	0x02
-#define AB8500_CH_USBCH_STAT2_REG	0x03
-#define AB8540_CH_USBCH_STAT3_REG	0x04
-#define AB8500_CH_STAT_REG		0x05
-
-/*
- * Charger / control register offfsets
- * Bank : 0x0B
- */
-#define AB8500_CH_VOLT_LVL_REG		0x40
-#define AB8500_CH_VOLT_LVL_MAX_REG	0x41  /*Only in Cut2.0*/
-#define AB8500_CH_OPT_CRNTLVL_REG	0x42
-#define AB8500_CH_OPT_CRNTLVL_MAX_REG	0x43  /*Only in Cut2.0*/
-#define AB8500_CH_WD_TIMER_REG		0x50
-#define AB8500_CHARG_WD_CTRL		0x51
-#define AB8500_BTEMP_HIGH_TH		0x52
-#define AB8500_LED_INDICATOR_PWM_CTRL	0x53
-#define AB8500_LED_INDICATOR_PWM_DUTY	0x54
-#define AB8500_BATT_OVV			0x55
-#define AB8500_CHARGER_CTRL		0x56
-#define AB8500_BAT_CTRL_CURRENT_SOURCE	0x60  /*Only in Cut2.0*/
-
-/*
- * Charger / main control register offsets
- * Bank : 0x0B
- */
-#define AB8500_MCH_CTRL1		0x80
-#define AB8500_MCH_CTRL2		0x81
-#define AB8500_MCH_IPT_CURLVL_REG	0x82
-#define AB8500_CH_WD_REG		0x83
-
-/*
- * Charger / USB control register offsets
- * Bank : 0x0B
- */
-#define AB8500_USBCH_CTRL1_REG		0xC0
-#define AB8500_USBCH_CTRL2_REG		0xC1
-#define AB8500_USBCH_IPT_CRNTLVL_REG	0xC2
-#define AB8540_USB_PP_MODE_REG		0xC5
-#define AB8540_USB_PP_CHR_REG		0xC6
-
-/*
- * Gas Gauge register offsets
- * Bank : 0x0C
- */
-#define AB8500_GASG_CC_CTRL_REG		0x00
-#define AB8500_GASG_CC_ACCU1_REG	0x01
-#define AB8500_GASG_CC_ACCU2_REG	0x02
-#define AB8500_GASG_CC_ACCU3_REG	0x03
-#define AB8500_GASG_CC_ACCU4_REG	0x04
-#define AB8500_GASG_CC_SMPL_CNTRL_REG	0x05
-#define AB8500_GASG_CC_SMPL_CNTRH_REG	0x06
-#define AB8500_GASG_CC_SMPL_CNVL_REG	0x07
-#define AB8500_GASG_CC_SMPL_CNVH_REG	0x08
-#define AB8500_GASG_CC_CNTR_AVGOFF_REG	0x09
-#define AB8500_GASG_CC_OFFSET_REG	0x0A
-#define AB8500_GASG_CC_NCOV_ACCU	0x10
-#define AB8500_GASG_CC_NCOV_ACCU_CTRL	0x11
-#define AB8500_GASG_CC_NCOV_ACCU_LOW	0x12
-#define AB8500_GASG_CC_NCOV_ACCU_MED	0x13
-#define AB8500_GASG_CC_NCOV_ACCU_HIGH	0x14
-
-/*
- * Interrupt register offsets
- * Bank : 0x0E
- */
-#define AB8500_IT_SOURCE2_REG		0x01
-#define AB8500_IT_SOURCE21_REG		0x14
-
-/*
- * RTC register offsets
- * Bank: 0x0F
- */
-#define AB8500_RTC_BACKUP_CHG_REG	0x0C
-#define AB8500_RTC_CC_CONF_REG		0x01
-#define AB8500_RTC_CTRL_REG		0x0B
-#define AB8500_RTC_CTRL1_REG		0x11
-
-/*
- * OTP register offsets
- * Bank : 0x15
- */
-#define AB8500_OTP_CONF_15		0x0E
-
-/* GPADC constants from AB8500 spec, UM0836 */
-#define ADC_RESOLUTION			1024
-#define ADC_CH_MAIN_MIN			0
-#define ADC_CH_MAIN_MAX			20030
-#define ADC_CH_VBUS_MIN			0
-#define ADC_CH_VBUS_MAX			20030
-#define ADC_CH_VBAT_MIN			2300
-#define ADC_CH_VBAT_MAX			4800
-#define ADC_CH_BKBAT_MIN		0
-#define ADC_CH_BKBAT_MAX		3200
-
-/* Main charge i/p current */
-#define MAIN_CH_IP_CUR_0P9A		0x80
-#define MAIN_CH_IP_CUR_1P0A		0x90
-#define MAIN_CH_IP_CUR_1P1A		0xA0
-#define MAIN_CH_IP_CUR_1P2A		0xB0
-#define MAIN_CH_IP_CUR_1P3A		0xC0
-#define MAIN_CH_IP_CUR_1P4A		0xD0
-#define MAIN_CH_IP_CUR_1P5A		0xE0
-
-/* ChVoltLevel */
-#define CH_VOL_LVL_3P5			0x00
-#define CH_VOL_LVL_4P0			0x14
-#define CH_VOL_LVL_4P05			0x16
-#define CH_VOL_LVL_4P1			0x1B
-#define CH_VOL_LVL_4P15			0x20
-#define CH_VOL_LVL_4P2			0x25
-#define CH_VOL_LVL_4P6			0x4D
-
-/* ChOutputCurrentLevel */
-#define CH_OP_CUR_LVL_0P1		0x00
-#define CH_OP_CUR_LVL_0P2		0x01
-#define CH_OP_CUR_LVL_0P3		0x02
-#define CH_OP_CUR_LVL_0P4		0x03
-#define CH_OP_CUR_LVL_0P5		0x04
-#define CH_OP_CUR_LVL_0P6		0x05
-#define CH_OP_CUR_LVL_0P7		0x06
-#define CH_OP_CUR_LVL_0P8		0x07
-#define CH_OP_CUR_LVL_0P9		0x08
-#define CH_OP_CUR_LVL_1P4		0x0D
-#define CH_OP_CUR_LVL_1P5		0x0E
-#define CH_OP_CUR_LVL_1P6		0x0F
-#define CH_OP_CUR_LVL_2P		0x3F
-
-/* BTEMP High thermal limits */
-#define BTEMP_HIGH_TH_57_0		0x00
-#define BTEMP_HIGH_TH_52		0x01
-#define BTEMP_HIGH_TH_57_1		0x02
-#define BTEMP_HIGH_TH_62		0x03
-
-/* current is mA */
-#define USB_0P1A			100
-#define USB_0P2A			200
-#define USB_0P3A			300
-#define USB_0P4A			400
-#define USB_0P5A			500
-
-#define LOW_BAT_3P1V			0x20
-#define LOW_BAT_2P3V			0x00
-#define LOW_BAT_RESET			0x01
-#define LOW_BAT_ENABLE			0x01
-
-/* Backup battery constants */
-#define BUP_ICH_SEL_50UA		0x00
-#define BUP_ICH_SEL_150UA		0x04
-#define BUP_ICH_SEL_300UA		0x08
-#define BUP_ICH_SEL_700UA		0x0C
-
-enum bup_vch_sel {
-	BUP_VCH_SEL_2P5V,
-	BUP_VCH_SEL_2P6V,
-	BUP_VCH_SEL_2P8V,
-	BUP_VCH_SEL_3P1V,
-	/*
-	 * Note that the following 5 values 2.7v, 2.9v, 3.0v, 3.2v, 3.3v
-	 * are only available on ab8540. You can't choose these 5
-	 * voltage on ab8500/ab8505/ab9540.
-	 */
-	BUP_VCH_SEL_2P7V,
-	BUP_VCH_SEL_2P9V,
-	BUP_VCH_SEL_3P0V,
-	BUP_VCH_SEL_3P2V,
-	BUP_VCH_SEL_3P3V,
-};
-
-#define BUP_VCH_RANGE		0x02
-#define VBUP33_VRTCN		0x01
-
-/* Battery OVV constants */
-#define BATT_OVV_ENA			0x02
-#define BATT_OVV_TH_3P7			0x00
-#define BATT_OVV_TH_4P75		0x01
-
-/* A value to indicate over voltage */
-#define BATT_OVV_VALUE			4750
-
-/* VBUS OVV constants */
-#define VBUS_OVV_SELECT_MASK		0x78
-#define VBUS_OVV_SELECT_5P6V		0x00
-#define VBUS_OVV_SELECT_5P7V		0x08
-#define VBUS_OVV_SELECT_5P8V		0x10
-#define VBUS_OVV_SELECT_5P9V		0x18
-#define VBUS_OVV_SELECT_6P0V		0x20
-#define VBUS_OVV_SELECT_6P1V		0x28
-#define VBUS_OVV_SELECT_6P2V		0x30
-#define VBUS_OVV_SELECT_6P3V		0x38
-
-#define VBUS_AUTO_IN_CURR_LIM_ENA	0x04
-
-/* Fuel Gauge constants */
-#define RESET_ACCU			0x02
-#define READ_REQ			0x01
-#define CC_DEEP_SLEEP_ENA		0x02
-#define CC_PWR_UP_ENA			0x01
-#define CC_SAMPLES_40			0x28
-#define RD_NCONV_ACCU_REQ		0x01
-#define CC_CALIB			0x08
-#define CC_INTAVGOFFSET_ENA		0x10
-#define CC_MUXOFFSET			0x80
-#define CC_INT_CAL_N_AVG_MASK		0x60
-#define CC_INT_CAL_SAMPLES_16		0x40
-#define CC_INT_CAL_SAMPLES_8		0x20
-#define CC_INT_CAL_SAMPLES_4		0x00
-
-/* RTC constants */
-#define RTC_BUP_CH_ENA			0x10
-
-/* BatCtrl Current Source Constants */
-#define BAT_CTRL_7U_ENA			0x01
-#define BAT_CTRL_20U_ENA		0x02
-#define BAT_CTRL_18U_ENA		0x01
-#define BAT_CTRL_16U_ENA		0x02
-#define BAT_CTRL_CMP_ENA		0x04
-#define FORCE_BAT_CTRL_CMP_HIGH		0x08
-#define BAT_CTRL_PULL_UP_ENA		0x10
-
-/* Battery type */
-#define BATTERY_UNKNOWN			00
-
-/* Registers for pcut feature in ab8505 and ab9540 */
-#define AB8505_RTC_PCUT_CTL_STATUS_REG	0x12
-#define AB8505_RTC_PCUT_TIME_REG	0x13
-#define AB8505_RTC_PCUT_MAX_TIME_REG	0x14
-#define AB8505_RTC_PCUT_FLAG_TIME_REG	0x15
-#define AB8505_RTC_PCUT_RESTART_REG	0x16
-#define AB8505_RTC_PCUT_DEBOUNCE_REG	0x17
-
-/* USB Power Path constants for ab8540 */
-#define BUS_VSYS_VOL_SELECT_MASK		0x06
-#define BUS_VSYS_VOL_SELECT_3P6V		0x00
-#define BUS_VSYS_VOL_SELECT_3P325V		0x02
-#define BUS_VSYS_VOL_SELECT_3P9V		0x04
-#define BUS_VSYS_VOL_SELECT_4P3V		0x06
-#define BUS_POWER_PATH_MODE_ENA			0x01
-#define BUS_PP_PRECHG_CURRENT_MASK		0x0E
-#define BUS_POWER_PATH_PRECHG_ENA		0x01
-
-/**
- * struct res_to_temp - defines one point in a temp to res curve. To
- * be used in battery packs that combines the identification resistor with a
- * NTC resistor.
- * @temp:			battery pack temperature in Celsius
- * @resist:			NTC resistor net total resistance
- */
-struct res_to_temp {
-	int temp;
-	int resist;
-};
-
-/**
- * struct batres_vs_temp - defines one point in a temp vs battery internal
- * resistance curve.
- * @temp:			battery pack temperature in Celsius
- * @resist:			battery internal reistance in mOhm
- */
-struct batres_vs_temp {
-	int temp;
-	int resist;
-};
-
-/* Forward declaration */
-struct ab8500_fg;
-
-/**
- * struct ab8500_fg_parameters - Fuel gauge algorithm parameters, in seconds
- * if not specified
- * @recovery_sleep_timer:	Time between measurements while recovering
- * @recovery_total_time:	Total recovery time
- * @init_timer:			Measurement interval during startup
- * @init_discard_time:		Time we discard voltage measurement at startup
- * @init_total_time:		Total init time during startup
- * @high_curr_time:		Time current has to be high to go to recovery
- * @accu_charging:		FG accumulation time while charging
- * @accu_high_curr:		FG accumulation time in high current mode
- * @high_curr_threshold:	High current threshold, in mA
- * @lowbat_threshold:		Low battery threshold, in mV
- * @battok_falling_th_sel0	Threshold in mV for battOk signal sel0
- *				Resolution in 50 mV step.
- * @battok_raising_th_sel1	Threshold in mV for battOk signal sel1
- *				Resolution in 50 mV step.
- * @user_cap_limit		Capacity reported from user must be within this
- *				limit to be considered as sane, in percentage
- *				points.
- * @maint_thres			This is the threshold where we stop reporting
- *				battery full while in maintenance, in per cent
- * @pcut_enable:			Enable power cut feature in ab8505
- * @pcut_max_time:		Max time threshold
- * @pcut_flag_time:		Flagtime threshold
- * @pcut_max_restart:		Max number of restarts
- * @pcut_debunce_time:	Sets battery debounce time
- */
-struct ab8500_fg_parameters {
-	int recovery_sleep_timer;
-	int recovery_total_time;
-	int init_timer;
-	int init_discard_time;
-	int init_total_time;
-	int high_curr_time;
-	int accu_charging;
-	int accu_high_curr;
-	int high_curr_threshold;
-	int lowbat_threshold;
-	int battok_falling_th_sel0;
-	int battok_raising_th_sel1;
-	int user_cap_limit;
-	int maint_thres;
-	bool pcut_enable;
-	u8 pcut_max_time;
-	u8 pcut_flag_time;
-	u8 pcut_max_restart;
-	u8 pcut_debunce_time;
-};
-
-/**
- * struct ab8500_charger_maximization - struct used by the board config.
- * @use_maxi:		Enable maximization for this battery type
- * @maxi_chg_curr:	Maximum charger current allowed
- * @maxi_wait_cycles:	cycles to wait before setting charger current
- * @charger_curr_step	delta between two charger current settings (mA)
- */
-struct ab8500_maxim_parameters {
-	bool ena_maxi;
-	int chg_curr;
-	int wait_cycles;
-	int charger_curr_step;
-};
-
-/**
- * struct ab8500_bm_capacity_levels - ab8500 capacity level data
- * @critical:		critical capacity level in percent
- * @low:		low capacity level in percent
- * @normal:		normal capacity level in percent
- * @high:		high capacity level in percent
- * @full:		full capacity level in percent
- */
-struct ab8500_bm_capacity_levels {
-	int critical;
-	int low;
-	int normal;
-	int high;
-	int full;
-};
-
-/**
- * struct ab8500_bm_charger_parameters - Charger specific parameters
- * @usb_volt_max:	maximum allowed USB charger voltage in mV
- * @usb_curr_max:	maximum allowed USB charger current in mA
- * @ac_volt_max:	maximum allowed AC charger voltage in mV
- * @ac_curr_max:	maximum allowed AC charger current in mA
- */
-struct ab8500_bm_charger_parameters {
-	int usb_volt_max;
-	int usb_curr_max;
-	int ac_volt_max;
-	int ac_curr_max;
-};
-
-/**
- * struct ab8500_bm_data - ab8500 battery management data
- * @temp_under		under this temp, charging is stopped
- * @temp_low		between this temp and temp_under charging is reduced
- * @temp_high		between this temp and temp_over charging is reduced
- * @temp_over		over this temp, charging is stopped
- * @temp_interval_chg	temperature measurement interval in s when charging
- * @temp_interval_nochg	temperature measurement interval in s when not charging
- * @main_safety_tmr_h	safety timer for main charger
- * @usb_safety_tmr_h	safety timer for usb charger
- * @bkup_bat_v		voltage which we charge the backup battery with
- * @bkup_bat_i		current which we charge the backup battery with
- * @no_maintenance	indicates that maintenance charging is disabled
- * @capacity_scaling    indicates whether capacity scaling is to be used
- * @adc_therm		placement of thermistor, batctrl or battemp adc
- * @chg_unknown_bat	flag to enable charging of unknown batteries
- * @enable_overshoot	flag to enable VBAT overshoot control
- * @fg_res		resistance of FG resistor in 0.1mOhm
- * @n_btypes		number of elements in array bat_type
- * @batt_id		index of the identified battery in array bat_type
- * @interval_charging	charge alg cycle period time when charging (sec)
- * @interval_not_charging charge alg cycle period time when not charging (sec)
- * @temp_hysteresis	temperature hysteresis
- * @gnd_lift_resistance	Battery ground to phone ground resistance (mOhm)
- * @maxi:		maximization parameters
- * @cap_levels		capacity in percent for the different capacity levels
- * @bat_type		table of supported battery types
- * @chg_params		charger parameters
- * @fg_params		fuel gauge parameters
- */
-struct ab8500_bm_data {
-	int temp_under;
-	int temp_low;
-	int temp_high;
-	int temp_over;
-	int temp_interval_chg;
-	int temp_interval_nochg;
-	int main_safety_tmr_h;
-	int usb_safety_tmr_h;
-	int bkup_bat_v;
-	int bkup_bat_i;
-	bool no_maintenance;
-	bool capacity_scaling;
-	bool chg_unknown_bat;
-	bool enable_overshoot;
-	enum abx500_adc_therm adc_therm;
-	int fg_res;
-	int n_btypes;
-	int batt_id;
-	int interval_charging;
-	int interval_not_charging;
-	int temp_hysteresis;
-	int gnd_lift_resistance;
-	const struct ab8500_maxim_parameters *maxi;
-	const struct ab8500_bm_capacity_levels *cap_levels;
-	const struct ab8500_bm_charger_parameters *chg_params;
-	const struct ab8500_fg_parameters *fg_params;
-};
-
-struct ab8500_btemp;
-struct ab8500_gpadc;
-struct ab8500_fg;
-
-#ifdef CONFIG_AB8500_BM
-extern struct abx500_bm_data ab8500_bm_data;
-
-void ab8500_charger_usb_state_changed(u8 bm_usb_state, u16 mA);
-struct ab8500_btemp *ab8500_btemp_get(void);
-int ab8500_btemp_get_batctrl_temp(struct ab8500_btemp *btemp);
-int ab8500_btemp_get_temp(struct ab8500_btemp *btemp);
-struct ab8500_fg *ab8500_fg_get(void);
-int ab8500_fg_inst_curr_blocking(struct ab8500_fg *dev);
-int ab8500_fg_inst_curr_start(struct ab8500_fg *di);
-int ab8500_fg_inst_curr_finalize(struct ab8500_fg *di, int *res);
-int ab8500_fg_inst_curr_started(struct ab8500_fg *di);
-int ab8500_fg_inst_curr_done(struct ab8500_fg *di);
-
-#else
-static struct abx500_bm_data ab8500_bm_data;
-#endif
-#endif /* _AB8500_BM_H */
diff --git a/include/linux/mfd/abx500/ux500_chargalg.h b/include/linux/mfd/abx500/ux500_chargalg.h
deleted file mode 100644
index 9b97d284d0ce..000000000000
--- a/include/linux/mfd/abx500/ux500_chargalg.h
+++ /dev/null
@@ -1,51 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2012
- * Author: Johan Gardsmark <johan.gardsmark@stericsson.com> for ST-Ericsson.
- */
-
-#ifndef _UX500_CHARGALG_H
-#define _UX500_CHARGALG_H
-
-#include <linux/power_supply.h>
-
-/*
- * Valid only for supplies of type:
- * - POWER_SUPPLY_TYPE_MAINS,
- * - POWER_SUPPLY_TYPE_USB,
- * because only them store as drv_data pointer to struct ux500_charger.
- */
-#define psy_to_ux500_charger(x) power_supply_get_drvdata(psy)
-
-/* Forward declaration */
-struct ux500_charger;
-
-struct ux500_charger_ops {
-	int (*enable) (struct ux500_charger *, int, int, int);
-	int (*check_enable) (struct ux500_charger *, int, int);
-	int (*kick_wd) (struct ux500_charger *);
-	int (*update_curr) (struct ux500_charger *, int);
-};
-
-/**
- * struct ux500_charger - power supply ux500 charger sub class
- * @psy			power supply base class
- * @ops			ux500 charger operations
- * @max_out_volt	maximum output charger voltage in mV
- * @max_out_curr	maximum output charger current in mA
- * @enabled		indicates if this charger is used or not
- * @external		external charger unit (pm2xxx)
- */
-struct ux500_charger {
-	struct power_supply *psy;
-	struct ux500_charger_ops ops;
-	int max_out_volt;
-	int max_out_curr;
-	int wdt_refresh;
-	bool enabled;
-	bool external;
-};
-
-extern struct blocking_notifier_head charger_notifier_list;
-
-#endif
diff --git a/include/linux/power/bq27xxx_battery.h b/include/linux/power/bq27xxx_battery.h
index 111a40d0d3d5..a1aa68141d0b 100644
--- a/include/linux/power/bq27xxx_battery.h
+++ b/include/linux/power/bq27xxx_battery.h
@@ -33,6 +33,7 @@ enum bq27xxx_chip {
 	BQ27Z561,
 	BQ28Z610,
 	BQ34Z100,
+	BQ78Z100,
 };
 
 struct bq27xxx_device_info;
@@ -53,7 +54,6 @@ struct bq27xxx_reg_cache {
 	int capacity;
 	int energy;
 	int flags;
-	int power_avg;
 	int health;
 };
 
diff --git a/include/linux/power_supply.h b/include/linux/power_supply.h
index b495b4374cd0..be203985ecdd 100644
--- a/include/linux/power_supply.h
+++ b/include/linux/power_supply.h
@@ -381,8 +381,14 @@ struct power_supply_battery_info {
 extern struct atomic_notifier_head power_supply_notifier;
 extern int power_supply_reg_notifier(struct notifier_block *nb);
 extern void power_supply_unreg_notifier(struct notifier_block *nb);
+#if IS_ENABLED(CONFIG_POWER_SUPPLY)
 extern struct power_supply *power_supply_get_by_name(const char *name);
 extern void power_supply_put(struct power_supply *psy);
+#else
+static inline void power_supply_put(struct power_supply *psy) {}
+static inline struct power_supply *power_supply_get_by_name(const char *name)
+{ return NULL; }
+#endif
 #ifdef CONFIG_OF
 extern struct power_supply *power_supply_get_by_phandle(struct device_node *np,
 							const char *property);
@@ -483,12 +489,12 @@ static inline bool power_supply_is_amp_property(enum power_supply_property psp)
 	case POWER_SUPPLY_PROP_CURRENT_NOW:
 	case POWER_SUPPLY_PROP_CURRENT_AVG:
 	case POWER_SUPPLY_PROP_CURRENT_BOOT:
-		return 1;
+		return true;
 	default:
 		break;
 	}
 
-	return 0;
+	return false;
 }
 
 static inline bool power_supply_is_watt_property(enum power_supply_property psp)
@@ -511,12 +517,12 @@ static inline bool power_supply_is_watt_property(enum power_supply_property psp)
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE:
 	case POWER_SUPPLY_PROP_CONSTANT_CHARGE_VOLTAGE_MAX:
 	case POWER_SUPPLY_PROP_POWER_NOW:
-		return 1;
+		return true;
 	default:
 		break;
 	}
 
-	return 0;
+	return false;
 }
 
 #ifdef CONFIG_POWER_SUPPLY_HWMON