summaryrefslogtreecommitdiff
path: root/include
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 11:26:30 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2012-03-20 11:26:30 -0700
commited378a52dabf77b406b447fd3238f83ea24b71fa (patch)
tree07e1a7ec2d1c08767ee81b9910f5912b80502632 /include
parent843ec558f91b8e8fdb6efc908f2c0506407cc750 (diff)
parent11207b6fe05438b2e87a26435cd98db3d55e6fa7 (diff)
Merge tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB merge for 3.4-rc1 from Greg KH: "Here's the big USB merge for the 3.4-rc1 merge window. Lots of gadget driver reworks here, driver updates, xhci changes, some new drivers added, usb-serial core reworking to fix some bugs, and other various minor things. There are some patches touching arch code, but they have all been acked by the various arch maintainers." * tag 'usb-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (302 commits) net: qmi_wwan: add support for ZTE MF820D USB: option: add ZTE MF820D usb: gadget: f_fs: Remove lock is held before freeing checks USB: option: make interface blacklist work again usb/ub: deprecate & schedule for removal the "Low Performance USB Block" driver USB: ohci-pxa27x: add clk_prepare/clk_unprepare calls USB: use generic platform driver on ath79 USB: EHCI: Add a generic platform device driver USB: OHCI: Add a generic platform device driver USB: ftdi_sio: new PID: LUMEL PD12 USB: ftdi_sio: add support for FT-X series devices USB: serial: mos7840: Fixed MCS7820 device attach problem usb: Don't make USB_ARCH_HAS_{XHCI,OHCI,EHCI} depend on USB_SUPPORT. usb gadget: fix a section mismatch when compiling g_ffs with CONFIG_USB_FUNCTIONFS_ETH USB: ohci-nxp: Remove i2c_write(), use smbus USB: ohci-nxp: Support for LPC32xx USB: ohci-nxp: Rename symbols from pnx4008 to nxp USB: OHCI-HCD: Rename ohci-pnx4008 to ohci-nxp usb: gadget: Kconfig: fix typo for 'different' usb: dwc3: pci: fix another failure path in dwc3_pci_probe() ...
Diffstat (limited to 'include')
-rw-r--r--include/linux/device.h7
-rw-r--r--include/linux/platform_data/dwc3-exynos.h24
-rw-r--r--include/linux/usb.h10
-rw-r--r--include/linux/usb/audio-v2.h21
-rw-r--r--include/linux/usb/cdc-wdm.h19
-rw-r--r--include/linux/usb/ch11.h5
-rw-r--r--include/linux/usb/ch9.h5
-rw-r--r--include/linux/usb/ehci_pdriver.h46
-rw-r--r--include/linux/usb/gadget.h10
-rw-r--r--include/linux/usb/hcd.h4
-rw-r--r--include/linux/usb/intel_mid_otg.h6
-rw-r--r--include/linux/usb/msm_hsusb.h2
-rw-r--r--include/linux/usb/ohci_pdriver.h38
-rw-r--r--include/linux/usb/otg.h164
-rw-r--r--include/linux/usb/renesas_usbhs.h1
-rw-r--r--include/linux/usb/serial.h36
-rw-r--r--include/linux/usb/storage.h38
-rw-r--r--include/linux/usb/uas.h69
-rw-r--r--include/linux/usb/ulpi.h4
-rw-r--r--include/scsi/scsi_device.h7
20 files changed, 430 insertions, 86 deletions
diff --git a/include/linux/device.h b/include/linux/device.h
index f62e21689fdd..7c46bc32fcbf 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -1005,19 +1005,20 @@ extern long sysfs_deprecated;
* @__driver: driver name
* @__register: register function for this driver type
* @__unregister: unregister function for this driver type
+ * @...: Additional arguments to be passed to __register and __unregister.
*
* Use this macro to construct bus specific macros for registering
* drivers, and do not use it on its own.
*/
-#define module_driver(__driver, __register, __unregister) \
+#define module_driver(__driver, __register, __unregister, ...) \
static int __init __driver##_init(void) \
{ \
- return __register(&(__driver)); \
+ return __register(&(__driver) , ##__VA_ARGS__); \
} \
module_init(__driver##_init); \
static void __exit __driver##_exit(void) \
{ \
- __unregister(&(__driver)); \
+ __unregister(&(__driver) , ##__VA_ARGS__); \
} \
module_exit(__driver##_exit);
diff --git a/include/linux/platform_data/dwc3-exynos.h b/include/linux/platform_data/dwc3-exynos.h
new file mode 100644
index 000000000000..5eb7da9b3772
--- /dev/null
+++ b/include/linux/platform_data/dwc3-exynos.h
@@ -0,0 +1,24 @@
+/**
+ * dwc3-exynos.h - Samsung EXYNOS DWC3 Specific Glue layer, header.
+ *
+ * Copyright (c) 2012 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Author: Anton Tikhomirov <av.tikhomirov@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef _DWC3_EXYNOS_H_
+#define _DWC3_EXYNOS_H_
+
+struct dwc3_exynos_data {
+ int phy_type;
+ int (*phy_init)(struct platform_device *pdev, int type);
+ int (*phy_exit)(struct platform_device *pdev, int type);
+};
+
+#endif /* _DWC3_EXYNOS_H_ */
diff --git a/include/linux/usb.h b/include/linux/usb.h
index 69d845739bc2..73b68d1f2cb0 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -376,6 +376,12 @@ struct usb_bus {
struct usb_tt;
+enum usb_device_removable {
+ USB_DEVICE_REMOVABLE_UNKNOWN = 0,
+ USB_DEVICE_REMOVABLE,
+ USB_DEVICE_FIXED,
+};
+
/**
* struct usb_device - kernel's representation of a USB device
* @devnum: device number; address on a USB bus
@@ -432,6 +438,7 @@ struct usb_tt;
* @wusb_dev: if this is a Wireless USB device, link to the WUSB
* specific data for the device.
* @slot_id: Slot ID assigned by xHCI
+ * @removable: Device can be physically removed from this port
*
* Notes:
* Usbcore drivers should not set usbdev->state directly. Instead use
@@ -494,7 +501,7 @@ struct usb_device {
#endif
int maxchild;
- struct usb_device *children[USB_MAXCHILDREN];
+ struct usb_device **children;
u32 quirks;
atomic_t urbnum;
@@ -509,6 +516,7 @@ struct usb_device {
#endif
struct wusb_dev *wusb_dev;
int slot_id;
+ enum usb_device_removable removable;
};
#define to_usb_device(d) container_of(d, struct usb_device, dev)
diff --git a/include/linux/usb/audio-v2.h b/include/linux/usb/audio-v2.h
index 964cb603f7c7..ed13053153f4 100644
--- a/include/linux/usb/audio-v2.h
+++ b/include/linux/usb/audio-v2.h
@@ -43,6 +43,27 @@ static inline bool uac2_control_is_writeable(u32 bmControls, u8 control)
return (bmControls >> (control * 2)) & 0x2;
}
+/* 4.7.2 Class-Specific AC Interface Descriptor */
+struct uac2_ac_header_descriptor {
+ __u8 bLength; /* 9 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* UAC_MS_HEADER */
+ __le16 bcdADC; /* 0x0200 */
+ __u8 bCategory;
+ __le16 wTotalLength; /* includes Unit and Terminal desc. */
+ __u8 bmControls;
+} __packed;
+
+/* 2.3.1.6 Type I Format Type Descriptor (Frmts20 final.pdf)*/
+struct uac2_format_type_i_descriptor {
+ __u8 bLength; /* in bytes: 6 */
+ __u8 bDescriptorType; /* USB_DT_CS_INTERFACE */
+ __u8 bDescriptorSubtype; /* FORMAT_TYPE */
+ __u8 bFormatType; /* FORMAT_TYPE_1 */
+ __u8 bSubslotSize; /* {1,2,3,4} */
+ __u8 bBitResolution;
+} __packed;
+
/* 4.7.2.1 Clock Source Descriptor */
struct uac_clock_source_descriptor {
diff --git a/include/linux/usb/cdc-wdm.h b/include/linux/usb/cdc-wdm.h
new file mode 100644
index 000000000000..719c332620fa
--- /dev/null
+++ b/include/linux/usb/cdc-wdm.h
@@ -0,0 +1,19 @@
+/*
+ * USB CDC Device Management subdriver
+ *
+ * Copyright (c) 2012 Bjørn Mork <bjorn@mork.no>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_USB_CDC_WDM_H
+#define __LINUX_USB_CDC_WDM_H
+
+extern struct usb_driver *usb_cdc_wdm_register(struct usb_interface *intf,
+ struct usb_endpoint_descriptor *ep,
+ int bufsize,
+ int (*manage_power)(struct usb_interface *, int));
+
+#endif /* __LINUX_USB_CDC_WDM_H */
diff --git a/include/linux/usb/ch11.h b/include/linux/usb/ch11.h
index 0b83acd3360a..f1d26b6067f1 100644
--- a/include/linux/usb/ch11.h
+++ b/include/linux/usb/ch11.h
@@ -76,6 +76,11 @@
#define USB_PORT_FEAT_C_BH_PORT_RESET 29
#define USB_PORT_FEAT_FORCE_LINKPM_ACCEPT 30
+/* USB 3.0 hub remote wake mask bits, see table 10-14 */
+#define USB_PORT_FEAT_REMOTE_WAKE_CONNECT (1 << 8)
+#define USB_PORT_FEAT_REMOTE_WAKE_DISCONNECT (1 << 9)
+#define USB_PORT_FEAT_REMOTE_WAKE_OVER_CURRENT (1 << 10)
+
/*
* Hub Status and Hub Change results
* See USB 2.0 spec Table 11-19 and Table 11-20
diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index 3b6f628880f8..af21f3115919 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -789,6 +789,11 @@ struct usb_ext_cap_descriptor { /* Link Power Management */
__u8 bDevCapabilityType;
__le32 bmAttributes;
#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
} __attribute__((packed));
#define USB_DT_USB_EXT_CAP_SIZE 7
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
new file mode 100644
index 000000000000..1894f42fe3f7
--- /dev/null
+++ b/include/linux/usb/ehci_pdriver.h
@@ -0,0 +1,46 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_EHCI_PDRIVER_H
+#define __USB_CORE_EHCI_PDRIVER_H
+
+/**
+ * struct usb_ehci_pdata - platform_data for generic ehci driver
+ *
+ * @caps_offset: offset of the EHCI Capability Registers to the start of
+ * the io memory region provided to the driver.
+ * @has_tt: set to 1 if TT is integrated in root hub.
+ * @port_power_on: set to 1 if the controller needs a power up after
+ * initialization.
+ * @port_power_off: set to 1 if the controller needs to be powered down
+ * after initialization.
+ *
+ * These are general configuration options for the EHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ehci_pdata {
+ int caps_offset;
+ unsigned has_tt:1;
+ unsigned has_synopsys_hc_bug:1;
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned port_power_on:1;
+ unsigned port_power_off:1;
+};
+
+#endif /* __USB_CORE_EHCI_PDRIVER_H */
diff --git a/include/linux/usb/gadget.h b/include/linux/usb/gadget.h
index da653b5c7134..9517466ababb 100644
--- a/include/linux/usb/gadget.h
+++ b/include/linux/usb/gadget.h
@@ -950,6 +950,16 @@ static inline void usb_free_descriptors(struct usb_descriptor_header **v)
/*-------------------------------------------------------------------------*/
+/* utility to simplify map/unmap of usb_requests to/from DMA */
+
+extern int usb_gadget_map_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+extern void usb_gadget_unmap_request(struct usb_gadget *gadget,
+ struct usb_request *req, int is_in);
+
+/*-------------------------------------------------------------------------*/
+
/* utility wrapping a simple endpoint selection policy */
extern struct usb_ep *usb_ep_autoconfig(struct usb_gadget *,
diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h
index b2f62f3a32af..5de415707c23 100644
--- a/include/linux/usb/hcd.h
+++ b/include/linux/usb/hcd.h
@@ -127,7 +127,7 @@ struct usb_hcd {
unsigned authorized_default:1;
unsigned has_tt:1; /* Integrated TT in root hub */
- int irq; /* irq allocated */
+ unsigned int irq; /* irq allocated */
void __iomem *regs; /* device memory/io */
u64 rsrc_start; /* memory/io resource start */
u64 rsrc_len; /* memory/io resource length */
@@ -412,6 +412,8 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+extern void usb_wakeup_notification(struct usb_device *hdev,
+ unsigned int portnum);
/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
diff --git a/include/linux/usb/intel_mid_otg.h b/include/linux/usb/intel_mid_otg.h
index a0ccf795f362..756cf5543ffd 100644
--- a/include/linux/usb/intel_mid_otg.h
+++ b/include/linux/usb/intel_mid_otg.h
@@ -104,11 +104,11 @@ struct iotg_ulpi_access_ops {
/*
* the Intel MID (Langwell/Penwell) otg transceiver driver needs to interact
* with device and host drivers to implement the USB OTG related feature. More
- * function members are added based on otg_transceiver data structure for this
+ * function members are added based on usb_phy data structure for this
* purpose.
*/
struct intel_mid_otg_xceiv {
- struct otg_transceiver otg;
+ struct usb_phy otg;
struct otg_hsm hsm;
/* base address */
@@ -147,7 +147,7 @@ struct intel_mid_otg_xceiv {
};
static inline
-struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct otg_transceiver *otg)
+struct intel_mid_otg_xceiv *otg_to_mid_xceiv(struct usb_phy *otg)
{
return container_of(otg, struct intel_mid_otg_xceiv, otg);
}
diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h
index 00311fe9d0df..22a396c13f3a 100644
--- a/include/linux/usb/msm_hsusb.h
+++ b/include/linux/usb/msm_hsusb.h
@@ -160,7 +160,7 @@ struct msm_otg_platform_data {
* detection process.
*/
struct msm_otg {
- struct otg_transceiver otg;
+ struct usb_phy phy;
struct msm_otg_platform_data *pdata;
int irq;
struct clk *clk;
diff --git a/include/linux/usb/ohci_pdriver.h b/include/linux/usb/ohci_pdriver.h
new file mode 100644
index 000000000000..2808f2a9cce8
--- /dev/null
+++ b/include/linux/usb/ohci_pdriver.h
@@ -0,0 +1,38 @@
+/*
+ * Copyright (C) 2012 Hauke Mehrtens <hauke@hauke-m.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+ * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+ * for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software Foundation,
+ * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef __USB_CORE_OHCI_PDRIVER_H
+#define __USB_CORE_OHCI_PDRIVER_H
+
+/**
+ * struct usb_ohci_pdata - platform_data for generic ohci driver
+ *
+ * @big_endian_desc: BE descriptors
+ * @big_endian_mmio: BE registers
+ * @no_big_frame_no: no big endian frame_no shift
+ *
+ * These are general configuration options for the OHCI controller. All of
+ * these options are activating more or less workarounds for some hardware.
+ */
+struct usb_ohci_pdata {
+ unsigned big_endian_desc:1;
+ unsigned big_endian_mmio:1;
+ unsigned no_big_frame_no:1;
+};
+
+#endif /* __USB_CORE_OHCI_PDRIVER_H */
diff --git a/include/linux/usb/otg.h b/include/linux/usb/otg.h
index d87f44f5b04e..f67810f8f21b 100644
--- a/include/linux/usb/otg.h
+++ b/include/linux/usb/otg.h
@@ -35,7 +35,7 @@ enum usb_otg_state {
OTG_STATE_A_VBUS_ERR,
};
-enum usb_xceiv_events {
+enum usb_phy_events {
USB_EVENT_NONE, /* no events or cable disconnected */
USB_EVENT_VBUS, /* vbus valid event */
USB_EVENT_ID, /* id was grounded */
@@ -43,14 +43,39 @@ enum usb_xceiv_events {
USB_EVENT_ENUMERATED, /* gadget driver enumerated */
};
-struct otg_transceiver;
+struct usb_phy;
/* for transceivers connected thru an ULPI interface, the user must
* provide access ops
*/
-struct otg_io_access_ops {
- int (*read)(struct otg_transceiver *otg, u32 reg);
- int (*write)(struct otg_transceiver *otg, u32 val, u32 reg);
+struct usb_phy_io_ops {
+ int (*read)(struct usb_phy *x, u32 reg);
+ int (*write)(struct usb_phy *x, u32 val, u32 reg);
+};
+
+struct usb_otg {
+ u8 default_a;
+
+ struct usb_phy *phy;
+ struct usb_bus *host;
+ struct usb_gadget *gadget;
+
+ /* bind/unbind the host controller */
+ int (*set_host)(struct usb_otg *otg, struct usb_bus *host);
+
+ /* bind/unbind the peripheral controller */
+ int (*set_peripheral)(struct usb_otg *otg,
+ struct usb_gadget *gadget);
+
+ /* effective for A-peripheral, ignored for B devices */
+ int (*set_vbus)(struct usb_otg *otg, bool enabled);
+
+ /* for B devices only: start session with A-Host */
+ int (*start_srp)(struct usb_otg *otg);
+
+ /* start or continue HNP role switch */
+ int (*start_hnp)(struct usb_otg *otg);
+
};
/*
@@ -59,22 +84,20 @@ struct otg_io_access_ops {
* moment, using the transceiver, ID signal, HNP and sometimes static
* configuration information (including "board isn't wired for otg").
*/
-struct otg_transceiver {
+struct usb_phy {
struct device *dev;
const char *label;
unsigned int flags;
- u8 default_a;
enum usb_otg_state state;
- enum usb_xceiv_events last_event;
+ enum usb_phy_events last_event;
- struct usb_bus *host;
- struct usb_gadget *gadget;
+ struct usb_otg *otg;
- struct otg_io_access_ops *io_ops;
- void __iomem *io_priv;
+ struct usb_phy_io_ops *io_ops;
+ void __iomem *io_priv;
- /* for notification of usb_xceiv_events */
+ /* for notification of usb_phy_events */
struct atomic_notifier_head notifier;
/* to pass extra port status to the root hub */
@@ -82,40 +105,22 @@ struct otg_transceiver {
u16 port_change;
/* initialize/shutdown the OTG controller */
- int (*init)(struct otg_transceiver *otg);
- void (*shutdown)(struct otg_transceiver *otg);
-
- /* bind/unbind the host controller */
- int (*set_host)(struct otg_transceiver *otg,
- struct usb_bus *host);
-
- /* bind/unbind the peripheral controller */
- int (*set_peripheral)(struct otg_transceiver *otg,
- struct usb_gadget *gadget);
+ int (*init)(struct usb_phy *x);
+ void (*shutdown)(struct usb_phy *x);
/* effective for B devices, ignored for A-peripheral */
- int (*set_power)(struct otg_transceiver *otg,
+ int (*set_power)(struct usb_phy *x,
unsigned mA);
- /* effective for A-peripheral, ignored for B devices */
- int (*set_vbus)(struct otg_transceiver *otg,
- bool enabled);
-
/* for non-OTG B devices: set transceiver into suspend mode */
- int (*set_suspend)(struct otg_transceiver *otg,
+ int (*set_suspend)(struct usb_phy *x,
int suspend);
- /* for B devices only: start session with A-Host */
- int (*start_srp)(struct otg_transceiver *otg);
-
- /* start or continue HNP role switch */
- int (*start_hnp)(struct otg_transceiver *otg);
-
};
/* for board-specific init logic */
-extern int otg_set_transceiver(struct otg_transceiver *);
+extern int usb_set_transceiver(struct usb_phy *);
#if defined(CONFIG_NOP_USB_XCEIV) || (defined(CONFIG_NOP_USB_XCEIV_MODULE) && defined(MODULE))
/* sometimes transceivers are accessed only through e.g. ULPI */
@@ -132,50 +137,50 @@ static inline void usb_nop_xceiv_unregister(void)
#endif
/* helpers for direct access thru low-level io interface */
-static inline int otg_io_read(struct otg_transceiver *otg, u32 reg)
+static inline int usb_phy_io_read(struct usb_phy *x, u32 reg)
{
- if (otg->io_ops && otg->io_ops->read)
- return otg->io_ops->read(otg, reg);
+ if (x->io_ops && x->io_ops->read)
+ return x->io_ops->read(x, reg);
return -EINVAL;
}
-static inline int otg_io_write(struct otg_transceiver *otg, u32 val, u32 reg)
+static inline int usb_phy_io_write(struct usb_phy *x, u32 val, u32 reg)
{
- if (otg->io_ops && otg->io_ops->write)
- return otg->io_ops->write(otg, val, reg);
+ if (x->io_ops && x->io_ops->write)
+ return x->io_ops->write(x, val, reg);
return -EINVAL;
}
static inline int
-otg_init(struct otg_transceiver *otg)
+usb_phy_init(struct usb_phy *x)
{
- if (otg->init)
- return otg->init(otg);
+ if (x->init)
+ return x->init(x);
return 0;
}
static inline void
-otg_shutdown(struct otg_transceiver *otg)
+usb_phy_shutdown(struct usb_phy *x)
{
- if (otg->shutdown)
- otg->shutdown(otg);
+ if (x->shutdown)
+ x->shutdown(x);
}
/* for usb host and peripheral controller drivers */
#ifdef CONFIG_USB_OTG_UTILS
-extern struct otg_transceiver *otg_get_transceiver(void);
-extern void otg_put_transceiver(struct otg_transceiver *);
+extern struct usb_phy *usb_get_transceiver(void);
+extern void usb_put_transceiver(struct usb_phy *);
extern const char *otg_state_string(enum usb_otg_state state);
#else
-static inline struct otg_transceiver *otg_get_transceiver(void)
+static inline struct usb_phy *usb_get_transceiver(void)
{
return NULL;
}
-static inline void otg_put_transceiver(struct otg_transceiver *x)
+static inline void usb_put_transceiver(struct usb_phy *x)
{
}
@@ -187,67 +192,84 @@ static inline const char *otg_state_string(enum usb_otg_state state)
/* Context: can sleep */
static inline int
-otg_start_hnp(struct otg_transceiver *otg)
+otg_start_hnp(struct usb_otg *otg)
{
- return otg->start_hnp(otg);
+ if (otg && otg->start_hnp)
+ return otg->start_hnp(otg);
+
+ return -ENOTSUPP;
}
/* Context: can sleep */
static inline int
-otg_set_vbus(struct otg_transceiver *otg, bool enabled)
+otg_set_vbus(struct usb_otg *otg, bool enabled)
{
- return otg->set_vbus(otg, enabled);
+ if (otg && otg->set_vbus)
+ return otg->set_vbus(otg, enabled);
+
+ return -ENOTSUPP;
}
/* for HCDs */
static inline int
-otg_set_host(struct otg_transceiver *otg, struct usb_bus *host)
+otg_set_host(struct usb_otg *otg, struct usb_bus *host)
{
- return otg->set_host(otg, host);
+ if (otg && otg->set_host)
+ return otg->set_host(otg, host);
+
+ return -ENOTSUPP;
}
/* for usb peripheral controller drivers */
/* Context: can sleep */
static inline int
-otg_set_peripheral(struct otg_transceiver *otg, struct usb_gadget *periph)
+otg_set_peripheral(struct usb_otg *otg, struct usb_gadget *periph)
{
- return otg->set_peripheral(otg, periph);
+ if (otg && otg->set_peripheral)
+ return otg->set_peripheral(otg, periph);
+
+ return -ENOTSUPP;
}
static inline int
-otg_set_power(struct otg_transceiver *otg, unsigned mA)
+usb_phy_set_power(struct usb_phy *x, unsigned mA)
{
- return otg->set_power(otg, mA);
+ if (x && x->set_power)
+ return x->set_power(x, mA);
+ return 0;
}
/* Context: can sleep */
static inline int
-otg_set_suspend(struct otg_transceiver *otg, int suspend)
+usb_phy_set_suspend(struct usb_phy *x, int suspend)
{
- if (otg->set_suspend != NULL)
- return otg->set_suspend(otg, suspend);
+ if (x->set_suspend != NULL)
+ return x->set_suspend(x, suspend);
else
return 0;
}
static inline int
-otg_start_srp(struct otg_transceiver *otg)
+otg_start_srp(struct usb_otg *otg)
{
- return otg->start_srp(otg);
+ if (otg && otg->start_srp)
+ return otg->start_srp(otg);
+
+ return -ENOTSUPP;
}
/* notifiers */
static inline int
-otg_register_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+usb_register_notifier(struct usb_phy *x, struct notifier_block *nb)
{
- return atomic_notifier_chain_register(&otg->notifier, nb);
+ return atomic_notifier_chain_register(&x->notifier, nb);
}
static inline void
-otg_unregister_notifier(struct otg_transceiver *otg, struct notifier_block *nb)
+usb_unregister_notifier(struct usb_phy *x, struct notifier_block *nb)
{
- atomic_notifier_chain_unregister(&otg->notifier, nb);
+ atomic_notifier_chain_unregister(&x->notifier, nb);
}
/* for OTG controller drivers (and maybe other stuff) */
diff --git a/include/linux/usb/renesas_usbhs.h b/include/linux/usb/renesas_usbhs.h
index 0d3f98879256..547e59cc00ea 100644
--- a/include/linux/usb/renesas_usbhs.h
+++ b/include/linux/usb/renesas_usbhs.h
@@ -149,6 +149,7 @@ struct renesas_usbhs_driver_param {
* option:
*/
u32 has_otg:1; /* for controlling PWEN/EXTLP */
+ u32 has_sudmac:1; /* for SUDMAC */
};
/*
diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h
index 4267a9c717ba..fbb666b1b670 100644
--- a/include/linux/usb/serial.h
+++ b/include/linux/usb/serial.h
@@ -300,8 +300,10 @@ struct usb_serial_driver {
#define to_usb_serial_driver(d) \
container_of(d, struct usb_serial_driver, driver)
-extern int usb_serial_register(struct usb_serial_driver *driver);
-extern void usb_serial_deregister(struct usb_serial_driver *driver);
+extern int usb_serial_register_drivers(struct usb_driver *udriver,
+ struct usb_serial_driver * const serial_drivers[]);
+extern void usb_serial_deregister_drivers(struct usb_driver *udriver,
+ struct usb_serial_driver * const serial_drivers[]);
extern void usb_serial_port_softint(struct usb_serial_port *port);
extern int usb_serial_probe(struct usb_interface *iface,
@@ -389,5 +391,35 @@ do { \
printk(KERN_DEBUG "%s: " format "\n", __FILE__, ##arg); \
} while (0)
+/*
+ * Macro for reporting errors in write path to avoid inifinite loop
+ * when port is used as a console.
+ */
+#define dev_err_console(usport, fmt, ...) \
+do { \
+ static bool __print_once; \
+ struct usb_serial_port *__port = (usport); \
+ \
+ if (!__port->port.console || !__print_once) { \
+ __print_once = true; \
+ dev_err(&__port->dev, fmt, ##__VA_ARGS__); \
+ } \
+} while (0)
+
+/*
+ * module_usb_serial_driver() - Helper macro for registering a USB Serial driver
+ * @__usb_driver: usb_driver struct to register
+ * @__serial_drivers: list of usb_serial drivers to register
+ *
+ * Helper macro for USB serial drivers which do not do anything special
+ * in module init/exit. This eliminates a lot of boilerplate. Each
+ * module may only use this macro once, and calling it replaces
+ * module_init() and module_exit()
+ *
+ */
+#define module_usb_serial_driver(__usb_driver, __serial_drivers) \
+ module_driver(__usb_driver, usb_serial_register_drivers, \
+ usb_serial_deregister_drivers, __serial_drivers)
+
#endif /* __LINUX_USB_SERIAL_H */
diff --git a/include/linux/usb/storage.h b/include/linux/usb/storage.h
index d7fc910f1dc4..cb33fff2ba0b 100644
--- a/include/linux/usb/storage.h
+++ b/include/linux/usb/storage.h
@@ -45,4 +45,42 @@
#define USB_PR_DEVICE 0xff /* Use device's value */
+ /*
+ * Bulk only data structures
+ */
+
+/* command block wrapper */
+struct bulk_cb_wrap {
+ __le32 Signature; /* contains 'USBC' */
+ __u32 Tag; /* unique per command id */
+ __le32 DataTransferLength; /* size of data */
+ __u8 Flags; /* direction in bit 0 */
+ __u8 Lun; /* LUN normally 0 */
+ __u8 Length; /* of of the CDB */
+ __u8 CDB[16]; /* max command */
+};
+
+#define US_BULK_CB_WRAP_LEN 31
+#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
+#define US_BULK_FLAG_IN (1 << 7)
+#define US_BULK_FLAG_OUT 0
+
+/* command status wrapper */
+struct bulk_cs_wrap {
+ __le32 Signature; /* should = 'USBS' */
+ __u32 Tag; /* same as original command */
+ __le32 Residue; /* amount not transferred */
+ __u8 Status; /* see below */
+};
+
+#define US_BULK_CS_WRAP_LEN 13
+#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
+#define US_BULK_STAT_OK 0
+#define US_BULK_STAT_FAIL 1
+#define US_BULK_STAT_PHASE 2
+
+/* bulk-only class specific requests */
+#define US_BULK_RESET_REQUEST 0xff
+#define US_BULK_GET_MAX_LUN 0xfe
+
#endif
diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h
new file mode 100644
index 000000000000..9a988e413694
--- /dev/null
+++ b/include/linux/usb/uas.h
@@ -0,0 +1,69 @@
+#ifndef __USB_UAS_H__
+#define __USB_UAS_H__
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+
+/* Common header for all IUs */
+struct iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+};
+
+enum {
+ IU_ID_COMMAND = 0x01,
+ IU_ID_STATUS = 0x03,
+ IU_ID_RESPONSE = 0x04,
+ IU_ID_TASK_MGMT = 0x05,
+ IU_ID_READ_READY = 0x06,
+ IU_ID_WRITE_READY = 0x07,
+};
+
+struct command_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __u8 prio_attr;
+ __u8 rsvd5;
+ __u8 len;
+ __u8 rsvd7;
+ struct scsi_lun lun;
+ __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */
+};
+
+/*
+ * Also used for the Read Ready and Write Ready IUs since they have the
+ * same first four bytes
+ */
+struct sense_iu {
+ __u8 iu_id;
+ __u8 rsvd1;
+ __be16 tag;
+ __be16 status_qual;
+ __u8 status;
+ __u8 rsvd7[7];
+ __be16 len;
+ __u8 sense[SCSI_SENSE_BUFFERSIZE];
+};
+
+struct usb_pipe_usage_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bPipeID;
+ __u8 Reserved;
+} __attribute__((__packed__));
+
+enum {
+ CMD_PIPE_ID = 1,
+ STATUS_PIPE_ID = 2,
+ DATA_IN_PIPE_ID = 3,
+ DATA_OUT_PIPE_ID = 4,
+
+ UAS_SIMPLE_TAG = 0,
+ UAS_HEAD_TAG = 1,
+ UAS_ORDERED_TAG = 2,
+ UAS_ACA = 4,
+};
+#endif
diff --git a/include/linux/usb/ulpi.h b/include/linux/usb/ulpi.h
index 9595796d62ed..6f033a415ecb 100644
--- a/include/linux/usb/ulpi.h
+++ b/include/linux/usb/ulpi.h
@@ -181,12 +181,12 @@
/*-------------------------------------------------------------------------*/
-struct otg_transceiver *otg_ulpi_create(struct otg_io_access_ops *ops,
+struct usb_phy *otg_ulpi_create(struct usb_phy_io_ops *ops,
unsigned int flags);
#ifdef CONFIG_USB_ULPI_VIEWPORT
/* access ops for controllers with a viewport register */
-extern struct otg_io_access_ops ulpi_viewport_access_ops;
+extern struct usb_phy_io_ops ulpi_viewport_access_ops;
#endif
#endif /* __LINUX_USB_ULPI_H */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index 77273f2fdd80..b3a1c2daf6cc 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -136,6 +136,7 @@ struct scsi_device {
unsigned use_10_for_ms:1; /* first try 10-byte mode sense/select */
unsigned skip_ms_page_8:1; /* do not use MODE SENSE page 0x08 */
unsigned skip_ms_page_3f:1; /* do not use MODE SENSE page 0x3f */
+ unsigned skip_vpd_pages:1; /* do not read VPD pages */
unsigned use_192_bytes_for_3f:1; /* ask for 192 bytes from page 0x3f */
unsigned no_start_on_add:1; /* do not issue start on add */
unsigned allow_restart:1; /* issue START_UNIT in error handler */
@@ -246,8 +247,10 @@ struct scsi_target {
unsigned int single_lun:1; /* Indicates we should only
* allow I/O to one of the luns
* for the device at a time. */
- unsigned int pdt_1f_for_no_lun; /* PDT = 0x1f */
- /* means no lun present */
+ unsigned int pdt_1f_for_no_lun:1; /* PDT = 0x1f
+ * means no lun present. */
+ unsigned int no_report_luns:1; /* Don't use
+ * REPORT LUNS for scanning. */
/* commands actually active on LLD. protected by host lock. */
unsigned int target_busy;
/*