Merge tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Consolidate duplicated 'next function' scanning and extend to allow
     'isolated functions' on s390, similar to existing hypervisors
     (Niklas Schnelle)

  Resource management:
   - Implement pci_iobar_pfn() for sparc, which allows us to remove the
     sparc-specific pci_mmap_page_range() and pci_mmap_resource_range().

     This removes the ability to map the entire PCI I/O space using
     /proc/bus/pci, but we believe that's already been broken since
     v2.6.28 (Arnd Bergmann)

   - Move common PCI definitions to asm-generic/pci.h and rework others
     to be be more specific and more encapsulated in arches that need
     them (Stafford Horne)

  Power management:

   - Convert drivers to new *_PM_OPS macros to avoid need for '#ifdef
     CONFIG_PM_SLEEP' or '__maybe_unused' (Bjorn Helgaas)

  Virtualization:

   - Add ACS quirk for Broadcom BCM5750x multifunction NICs that isolate
     the functions but don't advertise an ACS capability (Pavan Chebbi)

  Error handling:

   - Clear PCI Status register during enumeration in case firmware left
     errors logged (Kai-Heng Feng)

   - When we have native control of AER, enable error reporting for all
     devices that support AER. Previously only a few drivers enabled
     this (Stefan Roese)

   - Keep AER error reporting enabled for switches. Previously we
     enabled this during enumeration but immediately disabled it (Stefan
     Roese)

   - Iterate over error counters instead of error strings to avoid
     printing junk in AER sysfs counters (Mohamed Khalfella)

  ASPM:

   - Remove pcie_aspm_pm_state_change() so ASPM config changes, e.g.,
     via sysfs, are not lost across power state changes (Kai-Heng Feng)

  Endpoint framework:

   - Don't stop an EPC when unbinding an EPF from it (Shunsuke Mie)

  Endpoint embedded DMA controller driver:

   - Simplify and clean up support for the DesignWare embedded DMA
     (eDMA) controller (Frank Li, Serge Semin)

  Broadcom STB PCIe controller driver:

   - Avoid config space accesses when link is down because we can't
     recover from the CPU aborts these cause (Jim Quinlan)

   - Look for power regulators described under Root Ports in DT and
     enable them before scanning the secondary bus (Jim Quinlan)

   - Disable/enable regulators in suspend/resume (Jim Quinlan)

  Freescale i.MX6 PCIe controller driver:

   - Simplify and clean up clock and PHY management (Richard Zhu)

   - Disable/enable regulators in suspend/resume (Richard Zhu)

   - Set PCIE_DBI_RO_WR_EN before writing DBI registers (Richard Zhu)

   - Allow speeds faster than Gen2 (Richard Zhu)

   - Make link being down a non-fatal error so controller probe doesn't
     fail if there are no Endpoints connected (Richard Zhu)

  Loongson PCIe controller driver:

   - Add ACPI and MCFG support for Loongson LS7A (Huacai Chen)

   - Avoid config reads to non-existent LS2K/LS7A devices because a
     hardware defect causes machine hangs (Huacai Chen)

   - Work around LS7A integrated devices that report incorrect Interrupt
     Pin values (Jianmin Lv)

  Marvell Aardvark PCIe controller driver:

   - Add support for AER and Slot capability on emulated bridge (Pali
     Rohár)

  MediaTek PCIe controller driver:

   - Add Airoha EN7532 to DT binding (John Crispin)

   - Allow building of driver for ARCH_AIROHA (Felix Fietkau)

  MediaTek PCIe Gen3 controller driver:

   - Print decoded LTSSM state when the link doesn't come up (Jianjun
     Wang)

  NVIDIA Tegra194 PCIe controller driver:

   - Convert DT binding to json-schema (Vidya Sagar)

   - Add DT bindings and driver support for Tegra234 Root Port and
     Endpoint mode (Vidya Sagar)

   - Fix some Root Port interrupt handling issues (Vidya Sagar)

   - Set default Max Payload Size to 256 bytes (Vidya Sagar)

   - Fix Data Link Feature capability programming (Vidya Sagar)

   - Extend Endpoint mode support to devices beyond Controller-5 (Vidya
     Sagar)

  Qualcomm PCIe controller driver:

   - Rework clock, reset, PHY power-on ordering to avoid hangs and
     improve consistency (Robert Marko, Christian Marangi)

   - Move pipe_clk handling to PHY drivers (Dmitry Baryshkov)

   - Add IPQ60xx support (Selvam Sathappan Periakaruppan)

   - Allow ASPM L1 and substates for 2.7.0 (Krishna chaitanya chundru)

   - Add support for more than 32 MSI interrupts (Dmitry Baryshkov)

  Renesas R-Car PCIe controller driver:

   - Convert DT binding to json-schema (Herve Codina)

   - Add Renesas RZ/N1D (R9A06G032) to rcar-gen2 DT binding and driver
     (Herve Codina)

  Samsung Exynos PCIe controller driver:

   - Fix phy-exynos-pcie driver so it follows the 'phy_init() before
     phy_power_on()' PHY programming model (Marek Szyprowski)

  Synopsys DesignWare PCIe controller driver:

   - Simplify and clean up the DWC core extensively (Serge Semin)

   - Fix an issue with programming the ATU for regions that cross a 4GB
     boundary (Serge Semin)

   - Enable the CDM check if 'snps,enable-cdm-check' exists; previously
     we skipped it if 'num-lanes' was absent (Serge Semin)

   - Allocate a 32-bit DMA-able page to be MSI target instead of using a
     driver data structure that may not be addressable with 32-bit
     address (Will McVicker)

   - Add DWC core support for more than 32 MSI interrupts (Dmitry
     Baryshkov)

  Xilinx Versal CPM PCIe controller driver:

   - Add DT binding and driver support for Versal CPM5 Gen5 Root Port
     (Bharat Kumar Gogada)"

* tag 'pci-v5.20-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (150 commits)
  PCI: imx6: Support more than Gen2 speed link mode
  PCI: imx6: Set PCIE_DBI_RO_WR_EN before writing DBI registers
  PCI: imx6: Reformat suspend callback to keep symmetric with resume
  PCI: imx6: Move the imx6_pcie_ltssm_disable() earlier
  PCI: imx6: Disable clocks in reverse order of enable
  PCI: imx6: Do not hide PHY driver callbacks and refine the error handling
  PCI: imx6: Reduce resume time by only starting link if it was up before suspend
  PCI: imx6: Mark the link down as non-fatal error
  PCI: imx6: Move regulator enable out of imx6_pcie_deassert_core_reset()
  PCI: imx6: Turn off regulator when system is in suspend mode
  PCI: imx6: Call host init function directly in resume
  PCI: imx6: Disable i.MX6QDL clock when disabling ref clocks
  PCI: imx6: Propagate .host_init() errors to caller
  PCI: imx6: Collect clock enables in imx6_pcie_clk_enable()
  PCI: imx6: Factor out ref clock disable to match enable
  PCI: imx6: Move imx6_pcie_clk_disable() earlier
  PCI: imx6: Move imx6_pcie_enable_ref_clk() earlier
  PCI: imx6: Move PHY management functions together
  PCI: imx6: Move imx6_pcie_grp_offset(), imx6_pcie_configure_type() earlier
  PCI: imx6: Convert to NOIRQ_SYSTEM_SLEEP_PM_OPS()
  ...

7 files changed, 110 insertions, 27 deletions

diff --git a/include/asm-generic/pci.h b/include/asm-generic/pci.h
index 6bb3cd3d695a..6869f1061528 100644
--- a/include/asm-generic/pci.h
+++ b/include/asm-generic/pci.h
@@ -1,17 +1,30 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * linux/include/asm-generic/pci.h
- *
- *  Copyright (C) 2003 Russell King
- */
-#ifndef _ASM_GENERIC_PCI_H
-#define _ASM_GENERIC_PCI_H
+/* SPDX-License-Identifier: GPL-2.0-only */
 
-#ifndef HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ
-static inline int pci_get_legacy_ide_irq(struct pci_dev *dev, int channel)
+#ifndef __ASM_GENERIC_PCI_H
+#define __ASM_GENERIC_PCI_H
+
+#ifndef PCIBIOS_MIN_IO
+#define PCIBIOS_MIN_IO		0
+#endif
+
+#ifndef PCIBIOS_MIN_MEM
+#define PCIBIOS_MIN_MEM		0
+#endif
+
+#ifndef pcibios_assign_all_busses
+/* For bootloaders that do not initialize the PCI bus */
+#define pcibios_assign_all_busses() 1
+#endif
+
+/* Enable generic resource mapping code in drivers/pci/ */
+#define ARCH_GENERIC_PCI_MMAP_RESOURCE
+
+#ifdef CONFIG_PCI_DOMAINS
+static inline int pci_proc_domain(struct pci_bus *bus)
 {
-	return channel ? 15 : 14;
+	/* always show the domain in /proc */
+	return 1;
 }
-#endif /* HAVE_ARCH_PCI_GET_LEGACY_IDE_IRQ */
+#endif /* CONFIG_PCI_DOMAINS */
 
-#endif /* _ASM_GENERIC_PCI_H */
+#endif /* __ASM_GENERIC_PCI_H */
diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h
index 5a2f9bf53384..8fbb0a55545d 100644
--- a/include/asm-generic/pci_iomap.h
+++ b/include/asm-generic/pci_iomap.h
@@ -25,6 +25,8 @@ extern void pci_iounmap(struct pci_dev *dev, void __iomem *);
 #ifdef CONFIG_NO_GENERIC_PCI_IOPORT_MAP
 extern void __iomem *__pci_ioport_map(struct pci_dev *dev, unsigned long port,
 				      unsigned int nr);
+#elif !defined(CONFIG_HAS_IOPORT_MAP)
+#define __pci_ioport_map(dev, port, nr) NULL
 #else
 #define __pci_ioport_map(dev, port, nr) ioport_map((port), (nr))
 #endif
diff --git a/include/linux/dma/edma.h b/include/linux/dma/edma.h
index cab6e18773da..7d8062e9c544 100644
--- a/include/linux/dma/edma.h
+++ b/include/linux/dma/edma.h
@@ -12,19 +12,74 @@
 #include <linux/device.h>
 #include <linux/dmaengine.h>
 
+#define EDMA_MAX_WR_CH                                  8
+#define EDMA_MAX_RD_CH                                  8
+
 struct dw_edma;
 
+struct dw_edma_region {
+	phys_addr_t	paddr;
+	void __iomem	*vaddr;
+	size_t		sz;
+};
+
+struct dw_edma_core_ops {
+	int (*irq_vector)(struct device *dev, unsigned int nr);
+};
+
+enum dw_edma_map_format {
+	EDMA_MF_EDMA_LEGACY = 0x0,
+	EDMA_MF_EDMA_UNROLL = 0x1,
+	EDMA_MF_HDMA_COMPAT = 0x5
+};
+
+/**
+ * enum dw_edma_chip_flags - Flags specific to an eDMA chip
+ * @DW_EDMA_CHIP_LOCAL:		eDMA is used locally by an endpoint
+ */
+enum dw_edma_chip_flags {
+	DW_EDMA_CHIP_LOCAL	= BIT(0),
+};
+
 /**
  * struct dw_edma_chip - representation of DesignWare eDMA controller hardware
  * @dev:		 struct device of the eDMA controller
  * @id:			 instance ID
- * @irq:		 irq line
- * @dw:			 struct dw_edma that is filed by dw_edma_probe()
+ * @nr_irqs:		 total number of DMA IRQs
+ * @ops			 DMA channel to IRQ number mapping
+ * @flags		 dw_edma_chip_flags
+ * @reg_base		 DMA register base address
+ * @ll_wr_cnt		 DMA write link list count
+ * @ll_rd_cnt		 DMA read link list count
+ * @rg_region		 DMA register region
+ * @ll_region_wr	 DMA descriptor link list memory for write channel
+ * @ll_region_rd	 DMA descriptor link list memory for read channel
+ * @dt_region_wr	 DMA data memory for write channel
+ * @dt_region_rd	 DMA data memory for read channel
+ * @mf			 DMA register map format
+ * @dw:			 struct dw_edma that is filled by dw_edma_probe()
  */
 struct dw_edma_chip {
 	struct device		*dev;
 	int			id;
-	int			irq;
+	int			nr_irqs;
+	const struct dw_edma_core_ops   *ops;
+	u32			flags;
+
+	void __iomem		*reg_base;
+
+	u16			ll_wr_cnt;
+	u16			ll_rd_cnt;
+	/* link list address */
+	struct dw_edma_region	ll_region_wr[EDMA_MAX_WR_CH];
+	struct dw_edma_region	ll_region_rd[EDMA_MAX_RD_CH];
+
+	/* data region */
+	struct dw_edma_region	dt_region_wr[EDMA_MAX_WR_CH];
+	struct dw_edma_region	dt_region_rd[EDMA_MAX_RD_CH];
+
+	enum dw_edma_map_format	mf;
+
 	struct dw_edma		*dw;
 };
 
diff --git a/include/linux/hypervisor.h b/include/linux/hypervisor.h
index fc08b433c856..9efbc54e35e5 100644
--- a/include/linux/hypervisor.h
+++ b/include/linux/hypervisor.h
@@ -32,4 +32,12 @@ static inline bool jailhouse_paravirt(void)
 
 #endif /* !CONFIG_X86 */
 
+static inline bool hypervisor_isolated_pci_functions(void)
+{
+	if (IS_ENABLED(CONFIG_S390))
+		return true;
+
+	return jailhouse_paravirt();
+}
+
 #endif /* __LINUX_HYPEVISOR_H */
diff --git a/include/linux/isa-dma.h b/include/linux/isa-dma.h
new file mode 100644
index 000000000000..61504a8c1b9e
--- /dev/null
+++ b/include/linux/isa-dma.h
@@ -0,0 +1,14 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_ISA_DMA_H
+#define __LINUX_ISA_DMA_H
+
+#include <asm/dma.h>
+
+#if defined(CONFIG_PCI) && defined(CONFIG_X86_32)
+extern int isa_dma_bridge_buggy;
+#else
+#define isa_dma_bridge_buggy	(0)
+#endif
+
+#endif /* __LINUX_ISA_DMA_H */
diff --git a/include/linux/pci-ecam.h b/include/linux/pci-ecam.h
index adea5a4771cf..6b1301e2498e 100644
--- a/include/linux/pci-ecam.h
+++ b/include/linux/pci-ecam.h
@@ -87,6 +87,7 @@ extern const struct pci_ecam_ops xgene_v1_pcie_ecam_ops; /* APM X-Gene PCIe v1 *
 extern const struct pci_ecam_ops xgene_v2_pcie_ecam_ops; /* APM X-Gene PCIe v2.x */
 extern const struct pci_ecam_ops al_pcie_ops;	/* Amazon Annapurna Labs PCIe */
 extern const struct pci_ecam_ops tegra194_pcie_ops; /* Tegra194 PCIe */
+extern const struct pci_ecam_ops loongson_pci_ecam_ops; /* Loongson PCIe */
 #endif
 
 #if IS_ENABLED(CONFIG_PCI_HOST_COMMON)
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 81a57b498f22..060af91bafcd 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -1909,24 +1909,14 @@ pci_alloc_irq_vectors(struct pci_dev *dev, unsigned int min_vecs,
 
 #include <asm/pci.h>
 
-/* These two functions provide almost identical functionality. Depending
- * on the architecture, one will be implemented as a wrapper around the
- * other (in drivers/pci/mmap.c).
- *
+/*
  * pci_mmap_resource_range() maps a specific BAR, and vm->vm_pgoff
  * is expected to be an offset within that region.
  *
- * pci_mmap_page_range() is the legacy architecture-specific interface,
- * which accepts a "user visible" resource address converted by
- * pci_resource_to_user(), as used in the legacy mmap() interface in
- * /proc/bus/pci/.
  */
 int pci_mmap_resource_range(struct pci_dev *dev, int bar,
 			    struct vm_area_struct *vma,
 			    enum pci_mmap_state mmap_state, int write_combine);
-int pci_mmap_page_range(struct pci_dev *pdev, int bar,
-			struct vm_area_struct *vma,
-			enum pci_mmap_state mmap_state, int write_combine);
 
 #ifndef arch_can_pci_mmap_wc
 #define arch_can_pci_mmap_wc()		0