Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

1 files changed, 678 insertions, 0 deletions

diff --git a/samples/bpf/test_verifier.c b/samples/bpf/test_verifier.c
new file mode 100644
index 000000000000..f44ef11f65a7
--- /dev/null
+++ b/samples/bpf/test_verifier.c
@@ -0,0 +1,678 @@
+/*
+ * Testsuite for eBPF verifier
+ *
+ * Copyright (c) 2014 PLUMgrid, http://plumgrid.com
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of version 2 of the GNU General Public
+ * License as published by the Free Software Foundation.
+ */
+#include <stdio.h>
+#include <unistd.h>
+#include <linux/bpf.h>
+#include <errno.h>
+#include <linux/unistd.h>
+#include <string.h>
+#include <linux/filter.h>
+#include "libbpf.h"
+
+#define MAX_INSNS 512
+#define ARRAY_SIZE(x) (sizeof(x) / sizeof(*(x)))
+
+struct bpf_test {
+	const char *descr;
+	struct bpf_insn	insns[MAX_INSNS];
+	int fixup[32];
+	const char *errstr;
+	enum {
+		ACCEPT,
+		REJECT
+	} result;
+};
+
+static struct bpf_test tests[] = {
+	{
+		"add+sub+mul",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_1, 1),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 2),
+			BPF_MOV64_IMM(BPF_REG_2, 3),
+			BPF_ALU64_REG(BPF_SUB, BPF_REG_1, BPF_REG_2),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, -1),
+			BPF_ALU64_IMM(BPF_MUL, BPF_REG_1, 3),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+	{
+		"unreachable",
+		.insns = {
+			BPF_EXIT_INSN(),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "unreachable",
+		.result = REJECT,
+	},
+	{
+		"unreachable2",
+		.insns = {
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "unreachable",
+		.result = REJECT,
+	},
+	{
+		"out of range jump",
+		.insns = {
+			BPF_JMP_IMM(BPF_JA, 0, 0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "jump out of range",
+		.result = REJECT,
+	},
+	{
+		"out of range jump2",
+		.insns = {
+			BPF_JMP_IMM(BPF_JA, 0, 0, -2),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "jump out of range",
+		.result = REJECT,
+	},
+	{
+		"test1 ld_imm64",
+		.insns = {
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_MOV64_IMM(BPF_REG_0, 2),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid BPF_LD_IMM insn",
+		.result = REJECT,
+	},
+	{
+		"test2 ld_imm64",
+		.insns = {
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid BPF_LD_IMM insn",
+		.result = REJECT,
+	},
+	{
+		"test3 ld_imm64",
+		.insns = {
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1),
+			BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, 0, 0, 0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 0),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_LD_IMM64(BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid bpf_ld_imm64 insn",
+		.result = REJECT,
+	},
+	{
+		"test4 ld_imm64",
+		.insns = {
+			BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, 0, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid bpf_ld_imm64 insn",
+		.result = REJECT,
+	},
+	{
+		"test5 ld_imm64",
+		.insns = {
+			BPF_RAW_INSN(BPF_LD | BPF_IMM | BPF_DW, 0, 0, 0, 0),
+		},
+		.errstr = "invalid bpf_ld_imm64 insn",
+		.result = REJECT,
+	},
+	{
+		"no bpf_exit",
+		.insns = {
+			BPF_ALU64_REG(BPF_MOV, BPF_REG_0, BPF_REG_2),
+		},
+		.errstr = "jump out of range",
+		.result = REJECT,
+	},
+	{
+		"loop (back-edge)",
+		.insns = {
+			BPF_JMP_IMM(BPF_JA, 0, 0, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "back-edge",
+		.result = REJECT,
+	},
+	{
+		"loop2 (back-edge)",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_0),
+			BPF_MOV64_REG(BPF_REG_3, BPF_REG_0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, -4),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "back-edge",
+		.result = REJECT,
+	},
+	{
+		"conditional loop",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_0),
+			BPF_MOV64_REG(BPF_REG_3, BPF_REG_0),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, -3),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "back-edge",
+		.result = REJECT,
+	},
+	{
+		"read uninitialized register",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_2),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R2 !read_ok",
+		.result = REJECT,
+	},
+	{
+		"read invalid register",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_0, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R15 is invalid",
+		.result = REJECT,
+	},
+	{
+		"program doesn't init R0 before exit",
+		.insns = {
+			BPF_ALU64_REG(BPF_MOV, BPF_REG_2, BPF_REG_1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R0 !read_ok",
+		.result = REJECT,
+	},
+	{
+		"stack out of bounds",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid stack",
+		.result = REJECT,
+	},
+	{
+		"invalid call insn1",
+		.insns = {
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL | BPF_X, 0, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "BPF_CALL uses reserved",
+		.result = REJECT,
+	},
+	{
+		"invalid call insn2",
+		.insns = {
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 1, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "BPF_CALL uses reserved",
+		.result = REJECT,
+	},
+	{
+		"invalid function call",
+		.insns = {
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, 1234567),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid func 1234567",
+		.result = REJECT,
+	},
+	{
+		"uninitialized stack1",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_EXIT_INSN(),
+		},
+		.fixup = {2},
+		.errstr = "invalid indirect read from stack",
+		.result = REJECT,
+	},
+	{
+		"uninitialized stack2",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_2, -8),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid read from stack",
+		.result = REJECT,
+	},
+	{
+		"check valid spill/fill",
+		.insns = {
+			/* spill R1(ctx) into stack */
+			BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1, -8),
+
+			/* fill it back into R2 */
+			BPF_LDX_MEM(BPF_DW, BPF_REG_2, BPF_REG_10, -8),
+
+			/* should be able to access R0 = *(R2 + 8) */
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_2, 8),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+	{
+		"check corrupted spill/fill",
+		.insns = {
+			/* spill R1(ctx) into stack */
+			BPF_STX_MEM(BPF_DW, BPF_REG_10, BPF_REG_1, -8),
+
+			/* mess up with R1 pointer on stack */
+			BPF_ST_MEM(BPF_B, BPF_REG_10, -7, 0x23),
+
+			/* fill back into R0 should fail */
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_10, -8),
+
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "corrupted spill",
+		.result = REJECT,
+	},
+	{
+		"invalid src register in STX",
+		.insns = {
+			BPF_STX_MEM(BPF_B, BPF_REG_10, -1, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R15 is invalid",
+		.result = REJECT,
+	},
+	{
+		"invalid dst register in STX",
+		.insns = {
+			BPF_STX_MEM(BPF_B, 14, BPF_REG_10, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R14 is invalid",
+		.result = REJECT,
+	},
+	{
+		"invalid dst register in ST",
+		.insns = {
+			BPF_ST_MEM(BPF_B, 14, -1, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R14 is invalid",
+		.result = REJECT,
+	},
+	{
+		"invalid src register in LDX",
+		.insns = {
+			BPF_LDX_MEM(BPF_B, BPF_REG_0, 12, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R12 is invalid",
+		.result = REJECT,
+	},
+	{
+		"invalid dst register in LDX",
+		.insns = {
+			BPF_LDX_MEM(BPF_B, 11, BPF_REG_1, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "R11 is invalid",
+		.result = REJECT,
+	},
+	{
+		"junk insn",
+		.insns = {
+			BPF_RAW_INSN(0, 0, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid BPF_LD_IMM",
+		.result = REJECT,
+	},
+	{
+		"junk insn2",
+		.insns = {
+			BPF_RAW_INSN(1, 0, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "BPF_LDX uses reserved fields",
+		.result = REJECT,
+	},
+	{
+		"junk insn3",
+		.insns = {
+			BPF_RAW_INSN(-1, 0, 0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid BPF_ALU opcode f0",
+		.result = REJECT,
+	},
+	{
+		"junk insn4",
+		.insns = {
+			BPF_RAW_INSN(-1, -1, -1, -1, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "invalid BPF_ALU opcode f0",
+		.result = REJECT,
+	},
+	{
+		"junk insn5",
+		.insns = {
+			BPF_RAW_INSN(0x7f, -1, -1, -1, -1),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "BPF_ALU uses reserved fields",
+		.result = REJECT,
+	},
+	{
+		"misaligned read from stack",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_LDX_MEM(BPF_DW, BPF_REG_0, BPF_REG_2, -4),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "misaligned access",
+		.result = REJECT,
+	},
+	{
+		"invalid map_fd for function call",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_ALU64_REG(BPF_MOV, BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_EXIT_INSN(),
+		},
+		.errstr = "fd 0 is not pointing to valid bpf_map",
+		.result = REJECT,
+	},
+	{
+		"don't check return value before access",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.fixup = {3},
+		.errstr = "R0 invalid mem access 'map_value_or_null'",
+		.result = REJECT,
+	},
+	{
+		"access memory with incorrect alignment",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0),
+			BPF_EXIT_INSN(),
+		},
+		.fixup = {3},
+		.errstr = "misaligned access",
+		.result = REJECT,
+	},
+	{
+		"sometimes access memory with incorrect alignment",
+		.insns = {
+			BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0),
+			BPF_EXIT_INSN(),
+			BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup = {3},
+		.errstr = "R0 invalid mem access",
+		.result = REJECT,
+	},
+	{
+		"jump test 1",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_STX_MEM(BPF_DW, BPF_REG_2, BPF_REG_1, -8),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -8, 0),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 1, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -16, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 2, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -8, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 3, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -16, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 4, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -8, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 5, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -32, 5),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+	{
+		"jump test 2",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -8, 0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 14),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 1, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -16, 0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 11),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 2, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -32, 0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 8),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 3, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -40, 0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 5),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 4, 2),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -48, 0),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 5, 1),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -56, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+	{
+		"jump test 3",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_10),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 0, 3),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -8, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 19),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 1, 3),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -16, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -16),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 15),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 2, 3),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -32, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -32),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 11),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 3, 3),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -40, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -40),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 7),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 4, 3),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -48, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -48),
+			BPF_JMP_IMM(BPF_JA, 0, 0, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, 5, 0),
+			BPF_ST_MEM(BPF_DW, BPF_REG_2, -56, 0),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -56),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_unspec),
+			BPF_EXIT_INSN(),
+		},
+		.fixup = {24},
+		.result = ACCEPT,
+	},
+	{
+		"jump test 4",
+		.insns = {
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 1),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 2),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 3),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 4),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 0),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 0),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 0),
+			BPF_JMP_IMM(BPF_JEQ, BPF_REG_1, BPF_REG_10, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.result = ACCEPT,
+	},
+};
+
+static int probe_filter_length(struct bpf_insn *fp)
+{
+	int len = 0;
+
+	for (len = MAX_INSNS - 1; len > 0; --len)
+		if (fp[len].code != 0 || fp[len].imm != 0)
+			break;
+
+	return len + 1;
+}
+
+static int create_map(void)
+{
+	long long key, value = 0;
+	int map_fd;
+
+	map_fd = bpf_create_map(BPF_MAP_TYPE_UNSPEC, sizeof(key), sizeof(value), 1024);
+	if (map_fd < 0) {
+		printf("failed to create map '%s'\n", strerror(errno));
+	}
+
+	return map_fd;
+}
+
+static int test(void)
+{
+	int prog_fd, i;
+
+	for (i = 0; i < ARRAY_SIZE(tests); i++) {
+		struct bpf_insn *prog = tests[i].insns;
+		int prog_len = probe_filter_length(prog);
+		int *fixup = tests[i].fixup;
+		int map_fd = -1;
+
+		if (*fixup) {
+			map_fd = create_map();
+
+			do {
+				prog[*fixup].imm = map_fd;
+				fixup++;
+			} while (*fixup);
+		}
+		printf("#%d %s ", i, tests[i].descr);
+
+		prog_fd = bpf_prog_load(BPF_PROG_TYPE_UNSPEC, prog,
+					prog_len * sizeof(struct bpf_insn),
+					"GPL");
+
+		if (tests[i].result == ACCEPT) {
+			if (prog_fd < 0) {
+				printf("FAIL\nfailed to load prog '%s'\n",
+				       strerror(errno));
+				printf("%s", bpf_log_buf);
+				goto fail;
+			}
+		} else {
+			if (prog_fd >= 0) {
+				printf("FAIL\nunexpected success to load\n");
+				printf("%s", bpf_log_buf);
+				goto fail;
+			}
+			if (strstr(bpf_log_buf, tests[i].errstr) == 0) {
+				printf("FAIL\nunexpected error message: %s",
+				       bpf_log_buf);
+				goto fail;
+			}
+		}
+
+		printf("OK\n");
+fail:
+		if (map_fd >= 0)
+			close(map_fd);
+		close(prog_fd);
+
+	}
+
+	return 0;
+}
+
+int main(void)
+{
+	return test();
+}