Merge tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:

 - Add redirect_neigh() BPF packet redirect helper, allowing to limit
   stack traversal in common container configs and improving TCP
   back-pressure.

   Daniel reports ~10Gbps => ~15Gbps single stream TCP performance gain.

 - Expand netlink policy support and improve policy export to user
   space. (Ge)netlink core performs request validation according to
   declared policies. Expand the expressiveness of those policies
   (min/max length and bitmasks). Allow dumping policies for particular
   commands. This is used for feature discovery by user space (instead
   of kernel version parsing or trial and error).

 - Support IGMPv3/MLDv2 multicast listener discovery protocols in
   bridge.

 - Allow more than 255 IPv4 multicast interfaces.

 - Add support for Type of Service (ToS) reflection in SYN/SYN-ACK
   packets of TCPv6.

 - In Multi-patch TCP (MPTCP) support concurrent transmission of data on
   multiple subflows in a load balancing scenario. Enhance advertising
   addresses via the RM_ADDR/ADD_ADDR options.

 - Support SMC-Dv2 version of SMC, which enables multi-subnet
   deployments.

 - Allow more calls to same peer in RxRPC.

 - Support two new Controller Area Network (CAN) protocols - CAN-FD and
   ISO 15765-2:2016.

 - Add xfrm/IPsec compat layer, solving the 32bit user space on 64bit
   kernel problem.

 - Add TC actions for implementing MPLS L2 VPNs.

 - Improve nexthop code - e.g. handle various corner cases when nexthop
   objects are removed from groups better, skip unnecessary
   notifications and make it easier to offload nexthops into HW by
   converting to a blocking notifier.

 - Support adding and consuming TCP header options by BPF programs,
   opening the doors for easy experimental and deployment-specific TCP
   option use.

 - Reorganize TCP congestion control (CC) initialization to simplify
   life of TCP CC implemented in BPF.

 - Add support for shipping BPF programs with the kernel and loading
   them early on boot via the User Mode Driver mechanism, hence reusing
   all the user space infra we have.

 - Support sleepable BPF programs, initially targeting LSM and tracing.

 - Add bpf_d_path() helper for returning full path for given 'struct
   path'.

 - Make bpf_tail_call compatible with bpf-to-bpf calls.

 - Allow BPF programs to call map_update_elem on sockmaps.

 - Add BPF Type Format (BTF) support for type and enum discovery, as
   well as support for using BTF within the kernel itself (current use
   is for pretty printing structures).

 - Support listing and getting information about bpf_links via the bpf
   syscall.

 - Enhance kernel interfaces around NIC firmware update. Allow
   specifying overwrite mask to control if settings etc. are reset
   during update; report expected max time operation may take to users;
   support firmware activation without machine reboot incl. limits of
   how much impact reset may have (e.g. dropping link or not).

 - Extend ethtool configuration interface to report IEEE-standard
   counters, to limit the need for per-vendor logic in user space.

 - Adopt or extend devlink use for debug, monitoring, fw update in many
   drivers (dsa loop, ice, ionic, sja1105, qed, mlxsw, mv88e6xxx,
   dpaa2-eth).

 - In mlxsw expose critical and emergency SFP module temperature alarms.
   Refactor port buffer handling to make the defaults more suitable and
   support setting these values explicitly via the DCBNL interface.

 - Add XDP support for Intel's igb driver.

 - Support offloading TC flower classification and filtering rules to
   mscc_ocelot switches.

 - Add PTP support for Marvell Octeontx2 and PP2.2 hardware, as well as
   fixed interval period pulse generator and one-step timestamping in
   dpaa-eth.

 - Add support for various auth offloads in WiFi APs, e.g. SAE (WPA3)
   offload.

 - Add Lynx PHY/PCS MDIO module, and convert various drivers which have
   this HW to use it. Convert mvpp2 to split PCS.

 - Support Marvell Prestera 98DX3255 24-port switch ASICs, as well as
   7-port Mediatek MT7531 IP.

 - Add initial support for QCA6390 and IPQ6018 in ath11k WiFi driver,
   and wcn3680 support in wcn36xx.

 - Improve performance for packets which don't require much offloads on
   recent Mellanox NICs by 20% by making multiple packets share a
   descriptor entry.

 - Move chelsio inline crypto drivers (for TLS and IPsec) from the
   crypto subtree to drivers/net. Move MDIO drivers out of the phy
   directory.

 - Clean up a lot of W=1 warnings, reportedly the actively developed
   subsections of networking drivers should now build W=1 warning free.

 - Make sure drivers don't use in_interrupt() to dynamically adapt their
   code. Convert tasklets to use new tasklet_setup API (sadly this
   conversion is not yet complete).

* tag 'net-next-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2583 commits)
  Revert "bpfilter: Fix build error with CONFIG_BPFILTER_UMH"
  net, sockmap: Don't call bpf_prog_put() on NULL pointer
  bpf, selftest: Fix flaky tcp_hdr_options test when adding addr to lo
  bpf, sockmap: Add locking annotations to iterator
  netfilter: nftables: allow re-computing sctp CRC-32C in 'payload' statements
  net: fix pos incrementment in ipv6_route_seq_next
  net/smc: fix invalid return code in smcd_new_buf_create()
  net/smc: fix valid DMBE buffer sizes
  net/smc: fix use-after-free of delayed events
  bpfilter: Fix build error with CONFIG_BPFILTER_UMH
  cxgb4/ch_ipsec: Replace the module name to ch_ipsec from chcr
  net: sched: Fix suspicious RCU usage while accessing tcf_tunnel_info
  bpf: Fix register equivalence tracking.
  rxrpc: Fix loss of final ack on shutdown
  rxrpc: Fix bundle counting for exclusive connections
  netfilter: restore NF_INET_NUMHOOKS
  ibmveth: Identify ingress large send packets.
  ibmveth: Switch order of ibmveth_helper calls.
  cxgb4: handle 4-tuple PEDIT to NAT mode translation
  selftests: Add VRF route leaking tests
  ...

1 files changed, 101 insertions, 19 deletions

diff --git a/tools/lib/bpf/bpf_core_read.h b/tools/lib/bpf/bpf_core_read.h
index eae5cccff761..bbcefb3ff5a5 100644
--- a/tools/lib/bpf/bpf_core_read.h
+++ b/tools/lib/bpf/bpf_core_read.h
@@ -19,32 +19,52 @@ enum bpf_field_info_kind {
 	BPF_FIELD_RSHIFT_U64 = 5,
 };
 
+/* second argument to __builtin_btf_type_id() built-in */
+enum bpf_type_id_kind {
+	BPF_TYPE_ID_LOCAL = 0,		/* BTF type ID in local program */
+	BPF_TYPE_ID_TARGET = 1,		/* BTF type ID in target kernel */
+};
+
+/* second argument to __builtin_preserve_type_info() built-in */
+enum bpf_type_info_kind {
+	BPF_TYPE_EXISTS = 0,		/* type existence in target kernel */
+	BPF_TYPE_SIZE = 1,		/* type size in target kernel */
+};
+
+/* second argument to __builtin_preserve_enum_value() built-in */
+enum bpf_enum_value_kind {
+	BPF_ENUMVAL_EXISTS = 0,		/* enum value existence in kernel */
+	BPF_ENUMVAL_VALUE = 1,		/* enum value value relocation */
+};
+
 #define __CORE_RELO(src, field, info)					      \
 	__builtin_preserve_field_info((src)->field, BPF_FIELD_##info)
 
 #if __BYTE_ORDER == __LITTLE_ENDIAN
 #define __CORE_BITFIELD_PROBE_READ(dst, src, fld)			      \
-	bpf_probe_read((void *)dst,					      \
-		       __CORE_RELO(src, fld, BYTE_SIZE),		      \
-		       (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
+	bpf_probe_read_kernel(						      \
+			(void *)dst,				      \
+			__CORE_RELO(src, fld, BYTE_SIZE),		      \
+			(const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
 #else
 /* semantics of LSHIFT_64 assumes loading values into low-ordered bytes, so
  * for big-endian we need to adjust destination pointer accordingly, based on
  * field byte size
  */
 #define __CORE_BITFIELD_PROBE_READ(dst, src, fld)			      \
-	bpf_probe_read((void *)dst + (8 - __CORE_RELO(src, fld, BYTE_SIZE)),  \
-		       __CORE_RELO(src, fld, BYTE_SIZE),		      \
-		       (const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
+	bpf_probe_read_kernel(						      \
+			(void *)dst + (8 - __CORE_RELO(src, fld, BYTE_SIZE)), \
+			__CORE_RELO(src, fld, BYTE_SIZE),		      \
+			(const void *)src + __CORE_RELO(src, fld, BYTE_OFFSET))
 #endif
 
 /*
  * Extract bitfield, identified by s->field, and return its value as u64.
  * All this is done in relocatable manner, so bitfield changes such as
  * signedness, bit size, offset changes, this will be handled automatically.
- * This version of macro is using bpf_probe_read() to read underlying integer
- * storage. Macro functions as an expression and its return type is
- * bpf_probe_read()'s return value: 0, on success, <0 on error.
+ * This version of macro is using bpf_probe_read_kernel() to read underlying
+ * integer storage. Macro functions as an expression and its return type is
+ * bpf_probe_read_kernel()'s return value: 0, on success, <0 on error.
  */
 #define BPF_CORE_READ_BITFIELD_PROBED(s, field) ({			      \
 	unsigned long long val = 0;					      \
@@ -92,15 +112,75 @@ enum bpf_field_info_kind {
 	__builtin_preserve_field_info(field, BPF_FIELD_EXISTS)
 
 /*
- * Convenience macro to get byte size of a field. Works for integers,
+ * Convenience macro to get the byte size of a field. Works for integers,
  * struct/unions, pointers, arrays, and enums.
  */
 #define bpf_core_field_size(field)					    \
 	__builtin_preserve_field_info(field, BPF_FIELD_BYTE_SIZE)
 
 /*
- * bpf_core_read() abstracts away bpf_probe_read() call and captures offset
- * relocation for source address using __builtin_preserve_access_index()
+ * Convenience macro to get BTF type ID of a specified type, using a local BTF
+ * information. Return 32-bit unsigned integer with type ID from program's own
+ * BTF. Always succeeds.
+ */
+#define bpf_core_type_id_local(type)					    \
+	__builtin_btf_type_id(*(typeof(type) *)0, BPF_TYPE_ID_LOCAL)
+
+/*
+ * Convenience macro to get BTF type ID of a target kernel's type that matches
+ * specified local type.
+ * Returns:
+ *    - valid 32-bit unsigned type ID in kernel BTF;
+ *    - 0, if no matching type was found in a target kernel BTF.
+ */
+#define bpf_core_type_id_kernel(type)					    \
+	__builtin_btf_type_id(*(typeof(type) *)0, BPF_TYPE_ID_TARGET)
+
+/*
+ * Convenience macro to check that provided named type
+ * (struct/union/enum/typedef) exists in a target kernel.
+ * Returns:
+ *    1, if such type is present in target kernel's BTF;
+ *    0, if no matching type is found.
+ */
+#define bpf_core_type_exists(type)					    \
+	__builtin_preserve_type_info(*(typeof(type) *)0, BPF_TYPE_EXISTS)
+
+/*
+ * Convenience macro to get the byte size of a provided named type
+ * (struct/union/enum/typedef) in a target kernel.
+ * Returns:
+ *    >= 0 size (in bytes), if type is present in target kernel's BTF;
+ *    0, if no matching type is found.
+ */
+#define bpf_core_type_size(type)					    \
+	__builtin_preserve_type_info(*(typeof(type) *)0, BPF_TYPE_SIZE)
+
+/*
+ * Convenience macro to check that provided enumerator value is defined in
+ * a target kernel.
+ * Returns:
+ *    1, if specified enum type and its enumerator value are present in target
+ *    kernel's BTF;
+ *    0, if no matching enum and/or enum value within that enum is found.
+ */
+#define bpf_core_enum_value_exists(enum_type, enum_value)		    \
+	__builtin_preserve_enum_value(*(typeof(enum_type) *)enum_value, BPF_ENUMVAL_EXISTS)
+
+/*
+ * Convenience macro to get the integer value of an enumerator value in
+ * a target kernel.
+ * Returns:
+ *    64-bit value, if specified enum type and its enumerator value are
+ *    present in target kernel's BTF;
+ *    0, if no matching enum and/or enum value within that enum is found.
+ */
+#define bpf_core_enum_value(enum_type, enum_value)			    \
+	__builtin_preserve_enum_value(*(typeof(enum_type) *)enum_value, BPF_ENUMVAL_VALUE)
+
+/*
+ * bpf_core_read() abstracts away bpf_probe_read_kernel() call and captures
+ * offset relocation for source address using __builtin_preserve_access_index()
  * built-in, provided by Clang.
  *
  * __builtin_preserve_access_index() takes as an argument an expression of
@@ -115,8 +195,8 @@ enum bpf_field_info_kind {
  * (local) BTF, used to record relocation.
  */
 #define bpf_core_read(dst, sz, src)					    \
-	bpf_probe_read(dst, sz,						    \
-		       (const void *)__builtin_preserve_access_index(src))
+	bpf_probe_read_kernel(dst, sz,					    \
+			      (const void *)__builtin_preserve_access_index(src))
 
 /*
  * bpf_core_read_str() is a thin wrapper around bpf_probe_read_str()
@@ -124,8 +204,8 @@ enum bpf_field_info_kind {
  * argument.
  */
 #define bpf_core_read_str(dst, sz, src)					    \
-	bpf_probe_read_str(dst, sz,					    \
-			   (const void *)__builtin_preserve_access_index(src))
+	bpf_probe_read_kernel_str(dst, sz,				    \
+				  (const void *)__builtin_preserve_access_index(src))
 
 #define ___concat(a, b) a ## b
 #define ___apply(fn, n) ___concat(fn, n)
@@ -239,15 +319,17 @@ enum bpf_field_info_kind {
  *	int x = BPF_CORE_READ(s, a.b.c, d.e, f, g);
  *
  * BPF_CORE_READ will decompose above statement into 4 bpf_core_read (BPF
- * CO-RE relocatable bpf_probe_read() wrapper) calls, logically equivalent to:
+ * CO-RE relocatable bpf_probe_read_kernel() wrapper) calls, logically
+ * equivalent to:
  * 1. const void *__t = s->a.b.c;
  * 2. __t = __t->d.e;
  * 3. __t = __t->f;
  * 4. return __t->g;
  *
  * Equivalence is logical, because there is a heavy type casting/preservation
- * involved, as well as all the reads are happening through bpf_probe_read()
- * calls using __builtin_preserve_access_index() to emit CO-RE relocations.
+ * involved, as well as all the reads are happening through
+ * bpf_probe_read_kernel() calls using __builtin_preserve_access_index() to
+ * emit CO-RE relocations.
  *
  * N.B. Only up to 9 "field accessors" are supported, which should be more
  * than enough for any practical purpose.