summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--arch/arm/mach-berlin/berlin.c6
-rw-r--r--arch/arm/mach-exynos/exynos.c29
-rw-r--r--arch/arm/mach-imx/imx27-dt.c10
-rw-r--r--arch/arm/mach-imx/mach-imx51.c3
-rw-r--r--arch/arm/mach-imx/mach-imx53.c2
-rw-r--r--arch/arm/mach-imx/mach-imx7d.c6
-rw-r--r--arch/arm/mach-omap2/pm.c7
-rw-r--r--arch/arm/mach-rockchip/rockchip.c1
-rw-r--r--arch/arm/mach-shmobile/Makefile1
-rw-r--r--arch/arm/mach-shmobile/common.h7
-rw-r--r--arch/arm/mach-shmobile/cpufreq.c19
-rw-r--r--arch/arm/mach-sunxi/sunxi.c9
-rw-r--r--arch/arm/mach-zynq/common.c2
-rw-r--r--drivers/cpufreq/Kconfig44
-rw-r--r--drivers/cpufreq/Kconfig.arm9
-rw-r--r--drivers/cpufreq/Kconfig.x861
-rw-r--r--drivers/cpufreq/Makefile3
-rw-r--r--drivers/cpufreq/acpi-cpufreq.c129
-rw-r--r--drivers/cpufreq/cppc_cpufreq.c21
-rw-r--r--drivers/cpufreq/cpufreq-dt-platdev.c92
-rw-r--r--drivers/cpufreq/cpufreq-nforce2.c28
-rw-r--r--drivers/cpufreq/cpufreq.c164
-rw-r--r--drivers/cpufreq/cpufreq_conservative.c25
-rw-r--r--drivers/cpufreq/cpufreq_governor.c200
-rw-r--r--drivers/cpufreq/cpufreq_governor.h46
-rw-r--r--drivers/cpufreq/cpufreq_governor_attr_set.c84
-rw-r--r--drivers/cpufreq/cpufreq_ondemand.c29
-rw-r--r--drivers/cpufreq/e_powersaver.c76
-rw-r--r--drivers/cpufreq/elanfreq.c4
-rw-r--r--drivers/cpufreq/hisi-acpu-cpufreq.c42
-rw-r--r--drivers/cpufreq/ia64-acpi-cpufreq.c10
-rw-r--r--drivers/cpufreq/intel_pstate.c221
-rw-r--r--drivers/cpufreq/longhaul.c84
-rw-r--r--drivers/cpufreq/loongson2_cpufreq.c7
-rw-r--r--drivers/cpufreq/maple-cpufreq.c11
-rw-r--r--drivers/cpufreq/mt8173-cpufreq.c14
-rw-r--r--drivers/cpufreq/omap-cpufreq.c7
-rw-r--r--drivers/cpufreq/p4-clockmod.c19
-rw-r--r--drivers/cpufreq/pmac32-cpufreq.c14
-rw-r--r--drivers/cpufreq/pmac64-cpufreq.c47
-rw-r--r--drivers/cpufreq/powernow-k6.c16
-rw-r--r--drivers/cpufreq/powernow-k7.c70
-rw-r--r--drivers/cpufreq/powernv-cpufreq.c269
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq.h2
-rw-r--r--drivers/cpufreq/ppc_cbe_cpufreq_pmi.c15
-rw-r--r--drivers/cpufreq/pxa2xx-cpufreq.c18
-rw-r--r--drivers/cpufreq/qoriq-cpufreq.c9
-rw-r--r--drivers/cpufreq/s3c2412-cpufreq.c15
-rw-r--r--drivers/cpufreq/s3c2440-cpufreq.c6
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq-debugfs.c4
-rw-r--r--drivers/cpufreq/s3c24xx-cpufreq.c59
-rw-r--r--drivers/cpufreq/s5pv210-cpufreq.c10
-rw-r--r--drivers/cpufreq/sc520_freq.c10
-rw-r--r--drivers/cpufreq/speedstep-centrino.c6
-rw-r--r--drivers/cpufreq/speedstep-ich.c8
-rw-r--r--drivers/cpufreq/speedstep-lib.c11
-rw-r--r--drivers/cpufreq/speedstep-smi.c7
-rw-r--r--drivers/cpufreq/tegra124-cpufreq.c7
-rw-r--r--include/linux/cpufreq-dt.h2
-rw-r--r--include/linux/cpufreq.h54
-rw-r--r--include/linux/sched.h5
-rw-r--r--kernel/sched/Makefile1
-rw-r--r--kernel/sched/cpufreq.c48
-rw-r--r--kernel/sched/cpufreq_schedutil.c530
-rw-r--r--kernel/sched/sched.h8
-rw-r--r--kernel/trace/power-traces.c1
67 files changed, 1940 insertions, 789 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 0b3de80ec8f6..52292b28b291 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1661,6 +1661,11 @@ bytes respectively. Such letter suffixes can also be entirely omitted.
hwp_only
Only load intel_pstate on systems which support
hardware P state control (HWP) if available.
+ support_acpi_ppc
+ Enforce ACPI _PPC performance limits. If the Fixed ACPI
+ Description Table, specifies preferred power management
+ profile as "Enterprise Server" or "Performance Server",
+ then this feature is turned on by default.
intremap= [X86-64, Intel-IOMMU]
on enable Interrupt Remapping (default)
diff --git a/arch/arm/mach-berlin/berlin.c b/arch/arm/mach-berlin/berlin.c
index 25d73870ccca..ac181c6797ee 100644
--- a/arch/arm/mach-berlin/berlin.c
+++ b/arch/arm/mach-berlin/berlin.c
@@ -18,11 +18,6 @@
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
-static void __init berlin_init_late(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char * const berlin_dt_compat[] = {
"marvell,berlin",
NULL,
@@ -30,7 +25,6 @@ static const char * const berlin_dt_compat[] = {
DT_MACHINE_START(BERLIN_DT, "Marvell Berlin")
.dt_compat = berlin_dt_compat,
- .init_late = berlin_init_late,
/*
* with DT probing for L2CCs, berlin_init_machine can be removed.
* Note: 88DE3005 (Armada 1500-mini) uses pl310 l2cc
diff --git a/arch/arm/mach-exynos/exynos.c b/arch/arm/mach-exynos/exynos.c
index bbf51a46f772..4d3b056fd786 100644
--- a/arch/arm/mach-exynos/exynos.c
+++ b/arch/arm/mach-exynos/exynos.c
@@ -213,33 +213,6 @@ static void __init exynos_init_irq(void)
exynos_map_pmu();
}
-static const struct of_device_id exynos_cpufreq_matches[] = {
- { .compatible = "samsung,exynos3250", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4210", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4212", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos4412", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos5250", .data = "cpufreq-dt" },
-#ifndef CONFIG_BL_SWITCHER
- { .compatible = "samsung,exynos5420", .data = "cpufreq-dt" },
- { .compatible = "samsung,exynos5800", .data = "cpufreq-dt" },
-#endif
- { /* sentinel */ }
-};
-
-static void __init exynos_cpufreq_init(void)
-{
- struct device_node *root = of_find_node_by_path("/");
- const struct of_device_id *match;
-
- match = of_match_node(exynos_cpufreq_matches, root);
- if (!match) {
- platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
- return;
- }
-
- platform_device_register_simple(match->data, -1, NULL, 0);
-}
-
static void __init exynos_dt_machine_init(void)
{
/*
@@ -262,8 +235,6 @@ static void __init exynos_dt_machine_init(void)
of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
- exynos_cpufreq_init();
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
diff --git a/arch/arm/mach-imx/imx27-dt.c b/arch/arm/mach-imx/imx27-dt.c
index bd42d1bd10af..530a728c2acc 100644
--- a/arch/arm/mach-imx/imx27-dt.c
+++ b/arch/arm/mach-imx/imx27-dt.c
@@ -18,15 +18,6 @@
#include "common.h"
#include "mx27.h"
-static void __init imx27_dt_init(void)
-{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- platform_device_register_full(&devinfo);
-}
-
static const char * const imx27_dt_board_compat[] __initconst = {
"fsl,imx27",
NULL
@@ -36,6 +27,5 @@ DT_MACHINE_START(IMX27_DT, "Freescale i.MX27 (Device Tree Support)")
.map_io = mx27_map_io,
.init_early = imx27_init_early,
.init_irq = mx27_init_irq,
- .init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
MACHINE_END
diff --git a/arch/arm/mach-imx/mach-imx51.c b/arch/arm/mach-imx/mach-imx51.c
index 6883fbaf9484..10a82a4f1e58 100644
--- a/arch/arm/mach-imx/mach-imx51.c
+++ b/arch/arm/mach-imx/mach-imx51.c
@@ -50,13 +50,10 @@ static void __init imx51_ipu_mipi_setup(void)
static void __init imx51_dt_init(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-
imx51_ipu_mipi_setup();
imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_full(&devinfo);
}
static void __init imx51_init_late(void)
diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c
index 86316a979297..18b5c5c136db 100644
--- a/arch/arm/mach-imx/mach-imx53.c
+++ b/arch/arm/mach-imx/mach-imx53.c
@@ -40,8 +40,6 @@ static void __init imx53_dt_init(void)
static void __init imx53_init_late(void)
{
imx53_pm_init();
-
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
}
static const char * const imx53_dt_board_compat[] __initconst = {
diff --git a/arch/arm/mach-imx/mach-imx7d.c b/arch/arm/mach-imx/mach-imx7d.c
index 5a27f20c9a82..b450f525a670 100644
--- a/arch/arm/mach-imx/mach-imx7d.c
+++ b/arch/arm/mach-imx/mach-imx7d.c
@@ -105,11 +105,6 @@ static void __init imx7d_init_irq(void)
irqchip_init();
}
-static void __init imx7d_init_late(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char *const imx7d_dt_compat[] __initconst = {
"fsl,imx7d",
NULL,
@@ -117,7 +112,6 @@ static const char *const imx7d_dt_compat[] __initconst = {
DT_MACHINE_START(IMX7D, "Freescale i.MX7 Dual (Device Tree)")
.init_irq = imx7d_init_irq,
- .init_late = imx7d_init_late,
.init_machine = imx7d_init_machine,
.dt_compat = imx7d_dt_compat,
MACHINE_END
diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c
index 58920bc8807b..2f7b11da7d5d 100644
--- a/arch/arm/mach-omap2/pm.c
+++ b/arch/arm/mach-omap2/pm.c
@@ -277,13 +277,10 @@ static void __init omap4_init_voltages(void)
static inline void omap_init_cpufreq(void)
{
- struct platform_device_info devinfo = { };
+ struct platform_device_info devinfo = { .name = "omap-cpufreq" };
if (!of_have_populated_dt())
- devinfo.name = "omap-cpufreq";
- else
- devinfo.name = "cpufreq-dt";
- platform_device_register_full(&devinfo);
+ platform_device_register_full(&devinfo);
}
static int __init omap2_common_pm_init(void)
diff --git a/arch/arm/mach-rockchip/rockchip.c b/arch/arm/mach-rockchip/rockchip.c
index 3f07cc5dfe5f..beb71da5d9c8 100644
--- a/arch/arm/mach-rockchip/rockchip.c
+++ b/arch/arm/mach-rockchip/rockchip.c
@@ -74,7 +74,6 @@ static void __init rockchip_dt_init(void)
{
rockchip_suspend_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
- platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
}
static const char * const rockchip_board_dt_compat[] = {
diff --git a/arch/arm/mach-shmobile/Makefile b/arch/arm/mach-shmobile/Makefile
index a65c80ac9009..c9ea0e6ff4f9 100644
--- a/arch/arm/mach-shmobile/Makefile
+++ b/arch/arm/mach-shmobile/Makefile
@@ -38,7 +38,6 @@ smp-$(CONFIG_ARCH_EMEV2) += smp-emev2.o headsmp-scu.o platsmp-scu.o
# PM objects
obj-$(CONFIG_SUSPEND) += suspend.o
-obj-$(CONFIG_CPU_FREQ) += cpufreq.o
obj-$(CONFIG_PM_RCAR) += pm-rcar.o
obj-$(CONFIG_PM_RMOBILE) += pm-rmobile.o
obj-$(CONFIG_ARCH_RCAR_GEN2) += pm-rcar-gen2.o
diff --git a/arch/arm/mach-shmobile/common.h b/arch/arm/mach-shmobile/common.h
index 5464b7a75e30..3b562d87826d 100644
--- a/arch/arm/mach-shmobile/common.h
+++ b/arch/arm/mach-shmobile/common.h
@@ -25,16 +25,9 @@ static inline int shmobile_suspend_init(void) { return 0; }
static inline void shmobile_smp_apmu_suspend_init(void) { }
#endif
-#ifdef CONFIG_CPU_FREQ
-int shmobile_cpufreq_init(void);
-#else
-static inline int shmobile_cpufreq_init(void) { return 0; }
-#endif
-
static inline void __init shmobile_init_late(void)
{
shmobile_suspend_init();
- shmobile_cpufreq_init();
}
#endif /* __ARCH_MACH_COMMON_H */
diff --git a/arch/arm/mach-shmobile/cpufreq.c b/arch/arm/mach-shmobile/cpufreq.c
deleted file mode 100644
index 634d701c56a7..000000000000
--- a/arch/arm/mach-shmobile/cpufreq.c
+++ /dev/null
@@ -1,19 +0,0 @@
-/*
- * CPUFreq support code for SH-Mobile ARM
- *
- * Copyright (C) 2014 Gaku Inami
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- */
-
-#include <linux/platform_device.h>
-
-#include "common.h"
-
-int __init shmobile_cpufreq_init(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
- return 0;
-}
diff --git a/arch/arm/mach-sunxi/sunxi.c b/arch/arm/mach-sunxi/sunxi.c
index 3c156190a1d4..95dca8c2c9ed 100644
--- a/arch/arm/mach-sunxi/sunxi.c
+++ b/arch/arm/mach-sunxi/sunxi.c
@@ -17,11 +17,6 @@
#include <asm/mach/arch.h>
-static void __init sunxi_dt_cpufreq_init(void)
-{
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
-}
-
static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10",
"allwinner,sun5i-a10s",
@@ -32,7 +27,6 @@ static const char * const sunxi_board_dt_compat[] = {
DT_MACHINE_START(SUNXI_DT, "Allwinner sun4i/sun5i Families")
.dt_compat = sunxi_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun6i_board_dt_compat[] = {
@@ -53,7 +47,6 @@ static void __init sun6i_timer_init(void)
DT_MACHINE_START(SUN6I_DT, "Allwinner sun6i (A31) Family")
.init_time = sun6i_timer_init,
.dt_compat = sun6i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun7i_board_dt_compat[] = {
@@ -63,7 +56,6 @@ static const char * const sun7i_board_dt_compat[] = {
DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
.dt_compat = sun7i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun8i_board_dt_compat[] = {
@@ -77,7 +69,6 @@ static const char * const sun8i_board_dt_compat[] = {
DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i Family")
.init_time = sun6i_timer_init,
.dt_compat = sun8i_board_dt_compat,
- .init_late = sunxi_dt_cpufreq_init,
MACHINE_END
static const char * const sun9i_board_dt_compat[] = {
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 860ffb663f02..da876d28ccbc 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -110,7 +110,6 @@ static void __init zynq_init_late(void)
*/
static void __init zynq_init_machine(void)
{
- struct platform_device_info devinfo = { .name = "cpufreq-dt", };
struct soc_device_attribute *soc_dev_attr;
struct soc_device *soc_dev;
struct device *parent = NULL;
@@ -145,7 +144,6 @@ out:
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
platform_device_register(&zynq_cpuidle_device);
- platform_device_register_full(&devinfo);
}
static void __init zynq_timer_init(void)
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig
index a7f45853c103..b38d5028a03e 100644
--- a/drivers/cpufreq/Kconfig
+++ b/drivers/cpufreq/Kconfig
@@ -18,7 +18,11 @@ config CPU_FREQ
if CPU_FREQ
+config CPU_FREQ_GOV_ATTR_SET
+ bool
+
config CPU_FREQ_GOV_COMMON
+ select CPU_FREQ_GOV_ATTR_SET
select IRQ_WORK
bool
@@ -103,6 +107,16 @@ config CPU_FREQ_DEFAULT_GOV_CONSERVATIVE
Be aware that not all cpufreq drivers support the conservative
governor. If unsure have a look at the help section of the
driver. Fallback governor will be the performance governor.
+
+config CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+ bool "schedutil"
+ select CPU_FREQ_GOV_SCHEDUTIL
+ select CPU_FREQ_GOV_PERFORMANCE
+ help
+ Use the 'schedutil' CPUFreq governor by default. If unsure,
+ have a look at the help section of that governor. The fallback
+ governor will be 'performance'.
+
endchoice
config CPU_FREQ_GOV_PERFORMANCE
@@ -184,6 +198,26 @@ config CPU_FREQ_GOV_CONSERVATIVE
If in doubt, say N.
+config CPU_FREQ_GOV_SCHEDUTIL
+ tristate "'schedutil' cpufreq policy governor"
+ depends on CPU_FREQ
+ select CPU_FREQ_GOV_ATTR_SET
+ select IRQ_WORK
+ help
+ This governor makes decisions based on the utilization data provided
+ by the scheduler. It sets the CPU frequency to be proportional to
+ the utilization/capacity ratio coming from the scheduler. If the
+ utilization is frequency-invariant, the new frequency is also
+ proportional to the maximum available frequency. If that is not the
+ case, it is proportional to the current frequency of the CPU. The
+ frequency tipping point is at utilization/capacity equal to 80% in
+ both cases.
+
+ To compile this driver as a module, choose M here: the module will
+ be called cpufreq_schedutil.
+
+ If in doubt, say N.
+
comment "CPU frequency scaling drivers"
config CPUFREQ_DT
@@ -191,6 +225,7 @@ config CPUFREQ_DT
depends on HAVE_CLK && OF
# if CPU_THERMAL is on and THERMAL=m, CPUFREQ_DT cannot be =y:
depends on !CPU_THERMAL || THERMAL
+ select CPUFREQ_DT_PLATDEV
select PM_OPP
help
This adds a generic DT based cpufreq driver for frequency management.
@@ -199,6 +234,15 @@ config CPUFREQ_DT
If in doubt, say N.
+config CPUFREQ_DT_PLATDEV
+ bool
+ help
+ This adds a generic DT based cpufreq platdev driver for frequency
+ management. This creates a 'cpufreq-dt' platform device, on the
+ supported platforms.
+
+ If in doubt, say N.
+
if X86
source "drivers/cpufreq/Kconfig.x86"
endif
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 14b1f9393b05..d89b8afe23b6 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -50,15 +50,6 @@ config ARM_HIGHBANK_CPUFREQ
If in doubt, say N.
-config ARM_HISI_ACPU_CPUFREQ
- tristate "Hisilicon ACPU CPUfreq driver"
- depends on ARCH_HISI && CPUFREQ_DT
- select PM_OPP
- help
- This enables the hisilicon ACPU CPUfreq driver.
-
- If in doubt, say N.
-
config ARM_IMX6Q_CPUFREQ
tristate "Freescale i.MX6 cpufreq support"
depends on ARCH_MXC
diff --git a/drivers/cpufreq/Kconfig.x86 b/drivers/cpufreq/Kconfig.x86
index c59bdcb83217..adbd1de1cea5 100644
--- a/drivers/cpufreq/Kconfig.x86
+++ b/drivers/cpufreq/Kconfig.x86
@@ -5,6 +5,7 @@
config X86_INTEL_PSTATE
bool "Intel P state control"
depends on X86
+ select ACPI_PROCESSOR if ACPI
help
This driver provides a P state for Intel core processors.
The driver implements an internal governor and will become
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 9e63fb1b09f8..2cce2cd400f9 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -11,8 +11,10 @@ obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE) += cpufreq_userspace.o
obj-$(CONFIG_CPU_FREQ_GOV_ONDEMAND) += cpufreq_ondemand.o
obj-$(CONFIG_CPU_FREQ_GOV_CONSERVATIVE) += cpufreq_conservative.o
obj-$(CONFIG_CPU_FREQ_GOV_COMMON) += cpufreq_governor.o
+obj-$(CONFIG_CPU_FREQ_GOV_ATTR_SET) += cpufreq_governor_attr_set.o
obj-$(CONFIG_CPUFREQ_DT) += cpufreq-dt.o
+obj-$(CONFIG_CPUFREQ_DT_PLATDEV) += cpufreq-dt-platdev.o
##################################################################################
# x86 drivers.
@@ -53,7 +55,6 @@ obj-$(CONFIG_ARCH_DAVINCI) += davinci-cpufreq.o
obj-$(CONFIG_UX500_SOC_DB8500) += dbx500-cpufreq.o
obj-$(CONFIG_ARM_EXYNOS5440_CPUFREQ) += exynos5440-cpufreq.o
obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ) += highbank-cpufreq.o
-obj-$(CONFIG_ARM_HISI_ACPU_CPUFREQ) += hisi-acpu-cpufreq.o
obj-$(CONFIG_ARM_IMX6Q_CPUFREQ) += imx6q-cpufreq.o
obj-$(CONFIG_ARM_INTEGRATOR) += integrator-cpufreq.o
obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ) += kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index fb5712141040..32a15052f363 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -25,6 +25,8 @@
* ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -50,8 +52,6 @@ MODULE_AUTHOR("Paul Diefenbaugh, Dominik Brodowski");
MODULE_DESCRIPTION("ACPI Processor P-States Driver");
MODULE_LICENSE("GPL");
-#define PFX "acpi-cpufreq: "
-
enum {
UNDEFINED_CAPABLE = 0,
SYSTEM_INTEL_MSR_CAPABLE,
@@ -65,7 +65,6 @@ enum {
#define MSR_K7_HWCR_CPB_DIS (1ULL << 25)
struct acpi_cpufreq_data {
- struct cpufreq_frequency_table *freq_table;
unsigned int resume;
unsigned int cpu_feature;
unsigned int acpi_perf_cpu;
@@ -200,8 +199,9 @@ static int check_amd_hwpstate_cpu(unsigned int cpuid)
return cpu_has(cpu, X86_FEATURE_HW_PSTATE);
}
-static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
+static unsigned extract_io(struct cpufreq_policy *policy, u32 value)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
struct acpi_processor_performance *perf;
int i;
@@ -209,13 +209,14 @@ static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
for (i = 0; i < perf->state_count; i++) {
if (value == perf->states[i].status)
- return data->freq_table[i].frequency;
+ return policy->freq_table[i].frequency;
}
return 0;
}
-static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
+static unsigned extract_msr(struct cpufreq_policy *policy, u32 msr)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
struct cpufreq_frequency_table *pos;
struct acpi_processor_performance *perf;
@@ -226,20 +227,22 @@ static unsigned extract_msr(u32 msr, struct acpi_cpufreq_data *data)
perf = to_perf_data(data);
- cpufreq_for_each_entry(pos, data->freq_table)
+ cpufreq_for_each_entry(pos, policy->freq_table)
if (msr == perf->states[pos->driver_data].status)
return pos->frequency;
- return data->freq_table[0].frequency;
+ return policy->freq_table[0].frequency;
}
-static unsigned extract_freq(u32 val, struct acpi_cpufreq_data *data)
+static unsigned extract_freq(struct cpufreq_policy *policy, u32 val)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
+
switch (data->cpu_feature) {
case SYSTEM_INTEL_MSR_CAPABLE:
case SYSTEM_AMD_MSR_CAPABLE:
- return extract_msr(val, data);
+ return extract_msr(policy, val);
case SYSTEM_IO_CAPABLE:
- return extract_io(val, data);
+ return extract_io(policy, val);
default:
return 0;
}
@@ -374,11 +377,11 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
return 0;
data = policy->driver_data;
- if (unlikely(!data || !data->freq_table))
+ if (unlikely(!data || !policy->freq_table))
return 0;
- cached_freq = data->freq_table[to_perf_data(data)->state].frequency;
- freq = extract_freq(get_cur_val(cpumask_of(cpu), data), data);
+ cached_freq = policy->freq_table[to_perf_data(data)->state].frequency;
+ freq = extract_freq(policy, get_cur_val(cpumask_of(cpu), data));
if (freq != cached_freq) {
/*
* The dreaded BIOS frequency change behind our back.
@@ -392,14 +395,15 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu)
return freq;
}
-static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq,
- struct acpi_cpufreq_data *data)
+static unsigned int check_freqs(struct cpufreq_policy *policy,
+ const struct cpumask *mask, unsigned int freq)
{
+ struct acpi_cpufreq_data *data = policy->driver_data;
unsigned int cur_freq;
unsigned int i;
for (i = 0; i < 100; i++) {
- cur_freq = extract_freq(get_cur_val(mask, data), data);
+ cur_freq = extract_freq(policy, get_cur_val(mask, data));
if (cur_freq == freq)
return 1;
udelay(10);
@@ -416,12 +420,12 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
unsigned int next_perf_state = 0; /* Index into perf table */
int result = 0;
- if (unlikely(data == NULL || data->freq_table == NULL)) {
+ if (unlikely(!data)) {
return -ENODEV;
}
perf = to_perf_data(data);
- next_perf_state = data->freq_table[index].driver_data;
+ next_perf_state = policy->freq_table[index].driver_data;
if (perf->state == next_perf_state) {
if (unlikely(data->resume)) {
pr_debug("Called after resume, resetting to P%d\n",
@@ -444,8 +448,8 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
drv_write(data, mask, perf->states[next_perf_state].control);
if (acpi_pstate_strict) {
- if (!check_freqs(mask, data->freq_table[index].frequency,
- data)) {
+ if (!check_freqs(policy, mask,
+ policy->freq_table[index].frequency)) {
pr_debug("acpi_cpufreq_target failed (%d)\n",
policy->cpu);
result = -EAGAIN;
@@ -458,6 +462,43 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy,
return result;
}
+unsigned int acpi_cpufreq_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq)
+{
+ struct acpi_cpufreq_data *data = policy->driver_data;
+ struct acpi_processor_performance *perf;
+ struct cpufreq_frequency_table *entry;
+ unsigned int next_perf_state, next_freq, freq;
+
+ /*
+ * Find the closest frequency above target_freq.
+ *
+ * The table is sorted in the reverse order with respect to the
+ * frequency and all of the entries are valid (see the initialization).
+ */
+ entry = policy->freq_table;
+ do {
+ entry++;
+ freq = entry->frequency;
+ } while (freq >= target_freq && freq != CPUFREQ_TABLE_END);
+ entry--;
+ next_freq = entry->frequency;
+ next_perf_state = entry->driver_data;
+
+ perf = to_perf_data(data);
+ if (perf->state == next_perf_state) {
+ if (unlikely(data->resume))
+ data->resume = 0;
+ else
+ return next_freq;
+ }
+
+ data->cpu_freq_write(&perf->control_register,
+ perf->states[next_perf_state].control);
+ perf->state = next_perf_state;
+ return next_freq;
+}
+
static unsigned long
acpi_cpufreq_guess_freq(struct acpi_cpufreq_data *data, unsigned int cpu)
{
@@ -611,10 +652,7 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
if ((c->x86 == 15) &&
(c->x86_model == 6) &&
(c->x86_mask == 8)) {
- printk(KERN_INFO "acpi-cpufreq: Intel(R) "
- "Xeon(R) 7100 Errata AL30, processors may "
- "lock up on frequency changes: disabling "
- "acpi-cpufreq.\n");
+ pr_info("Intel(R) Xeon(R) 7100 Errata AL30, processors may lock up on frequency changes: disabling acpi-cpufreq\n");
return -ENODEV;
}
}
@@ -631,6 +669,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
unsigned int result = 0;
struct cpuinfo_x86 *c = &cpu_data(policy->cpu);
struct acpi_processor_performance *perf;
+ struct cpufreq_frequency_table *freq_table;
#ifdef CONFIG_SMP
static int blacklisted;
#endif
@@ -690,7 +729,7 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
cpumask_copy(data->freqdomain_cpus,
topology_sibling_cpumask(cpu));
policy->shared_type = CPUFREQ_SHARED_TYPE_HW;
- pr_info_once(PFX "overriding BIOS provided _PSD data\n");
+ pr_info_once("overriding BIOS provided _PSD data\n");
}
#endif
@@ -742,9 +781,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
goto err_unreg;
}
- data->freq_table = kzalloc(sizeof(*data->freq_table) *
+ freq_table = kzalloc(sizeof(*freq_table) *
(perf->state_count+1), GFP_KERNEL);
- if (!data->freq_table) {
+ if (!freq_table) {
result = -ENOMEM;
goto err_unreg;
}
@@ -762,30 +801,29 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
- printk_once(KERN_INFO
- "P-state transition latency capped at 20 uS\n");
+ pr_info_once("P-state transition latency capped at 20 uS\n");
}
/* table init */
for (i = 0; i < perf->state_count; i++) {
if (i > 0 && perf->states[i].core_frequency >=
- data->freq_table[valid_states-1].frequency / 1000)
+ freq_table[valid_states-1].frequency / 1000)
continue;
- data->freq_table[valid_states].driver_data = i;
- data->freq_table[valid_states].frequency =
+ freq_table[valid_states].driver_data = i;
+ freq_table[valid_states].frequency =
perf->states[i].core_frequency * 1000;
valid_states++;
}
- data->freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
+ freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
perf->state = 0;
- result = cpufreq_table_validate_and_show(policy, data->freq_table);
+ result = cpufreq_table_validate_and_show(policy, freq_table);
if (result)
goto err_freqfree;
if (perf->states[0].core_frequency * 1000 != policy->cpuinfo.max_freq)
- printk(KERN_WARNING FW_WARN "P-state 0 is not max freq\n");
+ pr_warn(FW_WARN "P-state 0 is not max freq\n");
switch (perf->control_register.space_id) {
case ACPI_ADR_SPACE_SYSTEM_IO:
@@ -821,10 +859,13 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
*/
data->resume = 1;
+ policy->fast_switch_possible = !acpi_pstate_strict &&
+ !(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
+
return result;
err_freqfree:
- kfree(data->freq_table);
+ kfree(freq_table);
err_unreg:
acpi_processor_unregister_performance(cpu);
err_free_mask:
@@ -842,13 +883,12 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
pr_debug("acpi_cpufreq_cpu_exit\n");
- if (data) {
- policy->driver_data = NULL;
- acpi_processor_unregister_performance(data->acpi_perf_cpu);
- free_cpumask_var(data->freqdomain_cpus);
- kfree(data->freq_table);
- kfree(data);
- }
+ policy->fast_switch_possible = false;
+ policy->driver_data = NULL;
+ acpi_processor_unregister_performance(data->acpi_perf_cpu);
+ free_cpumask_var(data->freqdomain_cpus);
+ kfree(policy->freq_table);
+ kfree(data);
return 0;
}
@@ -876,6 +916,7 @@ static struct freq_attr *acpi_cpufreq_attr[] = {
static struct cpufreq_driver acpi_cpufreq_driver = {
.verify = cpufreq_generic_frequency_table_verify,
.target_index = acpi_cpufreq_target,
+ .fast_switch = acpi_cpufreq_fast_switch,
.bios_limit = acpi_processor_get_bios_limit,
.init = acpi_cpufreq_cpu_init,
.exit = acpi_cpufreq_cpu_exit,
diff --git a/drivers/cpufreq/cppc_cpufreq.c b/drivers/cpufreq/cppc_cpufreq.c
index 7c0bdfb1a2ca..8882b8e2ecd0 100644
--- a/drivers/cpufreq/cppc_cpufreq.c
+++ b/drivers/cpufreq/cppc_cpufreq.c
@@ -173,4 +173,25 @@ out:
return -ENODEV;
}
+static void __exit cppc_cpufreq_exit(void)
+{
+ struct cpudata *cpu;
+ int i;
+
+ cpufreq_unregister_driver(&cppc_cpufreq_driver);
+
+ for_each_possible_cpu(i) {
+ cpu = all_cpu_data[i];
+ free_cpumask_var(cpu->shared_cpu_map);
+ kfree(cpu);
+ }
+
+ kfree(all_cpu_data);
+}
+
+module_exit(cppc_cpufreq_exit);
+MODULE_AUTHOR("Ashwin Chaugule");
+MODULE_DESCRIPTION("CPUFreq driver based on the ACPI CPPC v5.0+ spec");
+MODULE_LICENSE("GPL");
+
late_initcall(cppc_cpufreq_init);
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
new file mode 100644
index 000000000000..ac4a0ba87c12
--- /dev/null
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -0,0 +1,92 @@
+/*
+ * Copyright (C) 2016 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+
+static const struct of_device_id machines[] __initconst = {
+ { .compatible = "allwinner,sun4i-a10", },
+ { .compatible = "allwinner,sun5i-a10s", },
+ { .compatible = "allwinner,sun5i-a13", },
+ { .compatible = "allwinner,sun5i-r8", },
+ { .compatible = "allwinner,sun6i-a31", },
+ { .compatible = "allwinner,sun6i-a31s", },
+ { .compatible = "allwinner,sun7i-a20", },
+ { .compatible = "allwinner,sun8i-a23", },
+ { .compatible = "allwinner,sun8i-a33", },
+ { .compatible = "allwinner,sun8i-a83t", },
+ { .compatible = "allwinner,sun8i-h3", },
+
+ { .compatible = "hisilicon,hi6220", },
+
+ { .compatible = "fsl,imx27", },
+ { .compatible = "fsl,imx51", },
+ { .compatible = "fsl,imx53", },
+ { .compatible = "fsl,imx7d", },
+
+ { .compatible = "marvell,berlin", },
+
+ { .compatible = "samsung,exynos3250", },
+ { .compatible = "samsung,exynos4210", },
+ { .compatible = "samsung,exynos4212", },
+ { .compatible = "samsung,exynos4412", },
+ { .compatible = "samsung,exynos5250", },
+#ifndef CONFIG_BL_SWITCHER
+ { .compatible = "samsung,exynos5420", },
+ { .compatible = "samsung,exynos5800", },
+#endif
+
+ { .compatible = "renesas,emev2", },
+ { .compatible = "renesas,r7s72100", },
+ { .compatible = "renesas,r8a73a4", },
+ { .compatible = "renesas,r8a7740", },
+ { .compatible = "renesas,r8a7778", },
+ { .compatible = "renesas,r8a7779", },
+ { .compatible = "renesas,r8a7790", },
+ { .compatible = "renesas,r8a7791", },
+ { .compatible = "renesas,r8a7793", },
+ { .compatible = "renesas,r8a7794", },
+ { .compatible = "renesas,sh73a0", },
+
+ { .compatible = "rockchip,rk2928", },
+ { .compatible = "rockchip,rk3036", },
+ { .compatible = "rockchip,rk3066a", },
+ { .compatible = "rockchip,rk3066b", },
+ { .compatible = "rockchip,rk3188", },
+ { .compatible = "rockchip,rk3228", },
+ { .compatible = "rockchip,rk3288", },
+ { .compatible = "rockchip,rk3366", },
+ { .compatible = "rockchip,rk3368", },
+ { .compatible = "rockchip,rk3399", },
+
+ { .compatible = "ti,omap2", },
+ { .compatible = "ti,omap3", },
+ { .compatible = "ti,omap4", },
+ { .compatible = "ti,omap5", },
+
+ { .compatible = "xlnx,zynq-7000", },
+};
+
+static int __init cpufreq_dt_platdev_init(void)
+{
+ struct device_node *np = of_find_node_by_path("/");
+
+ if (!np)
+ return -ENODEV;
+
+ if (!of_match_node(machines, np))
+ return -ENODEV;
+
+ of_node_put(of_root);
+
+ return PTR_ERR_OR_ZERO(platform_device_register_simple("cpufreq-dt", -1,
+ NULL, 0));
+}
+device_initcall(cpufreq_dt_platdev_init);
diff --git a/drivers/cpufreq/cpufreq-nforce2.c b/drivers/cpufreq/cpufreq-nforce2.c
index db69eeb501a7..5503d491b016 100644
--- a/drivers/cpufreq/cpufreq-nforce2.c
+++ b/drivers/cpufreq/cpufreq-nforce2.c
@@ -7,6 +7,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -56,8 +58,6 @@ MODULE_PARM_DESC(fid, "CPU multiplier to use (11.5 = 115)");
MODULE_PARM_DESC(min_fsb,
"Minimum FSB to use, if not defined: current FSB - 50");
-#define PFX "cpufreq-nforce2: "
-
/**
* nforce2_calc_fsb - calculate FSB
* @pll: PLL value
@@ -174,13 +174,13 @@ static int nforce2_set_fsb(unsigned int fsb)
int pll = 0;
if ((fsb > max_fsb) || (fsb < NFORCE2_MIN_FSB)) {
- printk(KERN_ERR PFX "FSB %d is out of range!\n", fsb);
+ pr_err("FSB %d is out of range!\n", fsb);
return -EINVAL;
}
tfsb = nforce2_fsb_read(0);
if (!tfsb) {
- printk(KERN_ERR PFX "Error while reading the FSB\n");
+ pr_err("Error while reading the FSB\n");
return -EINVAL;
}
@@ -276,8 +276,7 @@ static int nforce2_target(struct cpufreq_policy *policy,
/* local_irq_save(flags); */
if (nforce2_set_fsb(target_fsb) < 0)
- printk(KERN_ERR PFX "Changing FSB to %d failed\n",
- target_fsb);
+ pr_err("Changing FSB to %d failed\n", target_fsb);
else
pr_debug("Changed FSB successfully to %d\n",
target_fsb);
@@ -325,8 +324,7 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
/* FIX: Get FID from CPU */
if (!fid) {
if (!cpu_khz) {
- printk(KERN_WARNING PFX
- "cpu_khz not set, can't calculate multiplier!\n");
+ pr_warn("cpu_khz not set, can't calculate multiplier!\n");
return -ENODEV;
}
@@ -341,8 +339,8 @@ static int nforce2_cpu_init(struct cpufreq_policy *policy)
}
}
- printk(KERN_INFO PFX "FSB currently at %i MHz, FID %d.%d\n", fsb,
- fid / 10, fid % 10);
+ pr_info("FSB currently at %i MHz, FID %d.%d\n",
+ fsb, fid / 10, fid % 10);
/* Set maximum FSB to FSB at boot time */
max_fsb = nforce2_fsb_read(1);
@@ -401,11 +399,9 @@ static int nforce2_detect_chipset(void)
if (nforce2_dev == NULL)
return -ENODEV;
- printk(KERN_INFO PFX "Detected nForce2 chipset revision %X\n",
- nforce2_dev->revision);
- printk(KERN_INFO PFX
- "FSB changing is maybe unstable and can lead to "
- "crashes and data loss.\n");
+ pr_info("Detected nForce2 chipset revision %X\n",
+ nforce2_dev->revision);
+ pr_info("FSB changing is maybe unstable and can lead to crashes and data loss\n");
return 0;
}
@@ -423,7 +419,7 @@ static int __init nforce2_init(void)
/* detect chipset */
if (nforce2_detect_chipset()) {
- printk(KERN_INFO PFX "No nForce2 chipset.\n");
+ pr_info("No nForce2 chipset\n");
return -ENODEV;
}
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index e93405f0eac4..a48b998b3304 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -78,6 +78,11 @@ static int cpufreq_governor(struct cpufreq_policy *policy, unsigned int event);
static unsigned int __cpufreq_get(struct cpufreq_policy *policy);
static int cpufreq_start_governor(struct cpufreq_policy *policy);
+static inline int cpufreq_exit_governor(struct cpufreq_policy *policy)
+{
+ return cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+}
+
/**
* Two notifier lists: the "policy" list is involved in the
* validation process for a new CPU frequency policy; the
@@ -429,6 +434,73 @@ void cpufreq_freq_transition_end(struct cpufreq_policy *policy,
}
EXPORT_SYMBOL_GPL(cpufreq_freq_transition_end);
+/*
+ * Fast frequency switching status count. Positive means "enabled", negative
+ * means "disabled" and 0 means "not decided yet".
+ */
+static int cpufreq_fast_switch_count;
+static DEFINE_MUTEX(cpufreq_fast_switch_lock);
+
+static void cpufreq_list_transition_notifiers(void)
+{
+ struct notifier_block *nb;
+
+ pr_info("Registered transition notifiers:\n");
+
+ mutex_lock(&cpufreq_transition_notifier_list.mutex);
+
+ for (nb = cpufreq_transition_notifier_list.head; nb; nb = nb->next)
+ pr_info("%pF\n", nb->notifier_call);
+
+ mutex_unlock(&cpufreq_transition_notifier_list.mutex);
+}
+
+/**
+ * cpufreq_enable_fast_switch - Enable fast frequency switching for policy.
+ * @policy: cpufreq policy to enable fast frequency switching for.
+ *
+ * Try to enable fast frequency switching for @policy.
+ *
+ * The attempt will fail if there is at least one transition notifier registered
+ * at this point, as fast frequency switching is quite fundamentally at odds
+ * with transition notifiers. Thus if successful, it will make registration of
+ * transition notifiers fail going forward.
+ */
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy)
+{
+ lockdep_assert_held(&policy->rwsem);
+
+ if (!policy->fast_switch_possible)
+ return;
+
+ mutex_lock(&cpufreq_fast_switch_lock);
+ if (cpufreq_fast_switch_count >= 0) {
+ cpufreq_fast_switch_count++;
+ policy->fast_switch_enabled = true;
+ } else {
+ pr_warn("CPU%u: Fast frequency switching not enabled\n",
+ policy->cpu);
+ cpufreq_list_transition_notifiers();
+ }
+ mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_enable_fast_switch);
+
+/**
+ * cpufreq_disable_fast_switch - Disable fast frequency switching for policy.
+ * @policy: cpufreq policy to disable fast frequency switching for.
+ */
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy)
+{
+ mutex_lock(&cpufreq_fast_switch_lock);
+ if (policy->fast_switch_enabled) {
+ policy->fast_switch_enabled = false;
+ if (!WARN_ON(cpufreq_fast_switch_count <= 0))
+ cpufreq_fast_switch_count--;
+ }
+ mutex_unlock(&cpufreq_fast_switch_lock);
+}
+EXPORT_SYMBOL_GPL(cpufreq_disable_fast_switch);
/*********************************************************************
* SYSFS INTERFACE *
@@ -1248,26 +1320,24 @@ out_free_policy:
*/
static int cpufreq_add_dev(struct device *dev, struct subsys_interface *sif)
{
+ struct cpufreq_policy *policy;
unsigned cpu = dev->id;
- int ret;
dev_dbg(dev, "%s: adding CPU%u\n", __func__, cpu);
- if (cpu_online(cpu)) {
- ret = cpufreq_online(cpu);
- } else {
- /*
- * A hotplug notifier will follow and we will handle it as CPU
- * online then. For now, just create the sysfs link, unless
- * there is no policy or the link is already present.
- */
- struct cpufreq_policy *policy = per_cpu(cpufreq_cpu_data, cpu);
+ if (cpu_online(cpu))
+ return cpufreq_online(cpu);
- ret = policy && !cpumask_test_and_set_cpu(cpu, policy->real_cpus)
- ? add_cpu_dev_symlink(policy, cpu) : 0;
- }
+ /*
+ * A hotplug notifier will follow and we will handle it as CPU online
+ * then. For now, just create the sysfs link, unless there is no policy
+ * or the link is already present.
+ */
+ policy = per_cpu(cpufreq_cpu_data, cpu);
+ if (!policy || cpumask_test_and_set_cpu(cpu, policy->real_cpus))
+ return 0;
- return ret;
+ return add_cpu_dev_symlink(policy, cpu);
}
static void cpufreq_offline(unsigned int cpu)
@@ -1319,7 +1389,7 @@ static void cpufreq_offline(unsigned int cpu)
/* If cpu is last user of policy, free policy */
if (has_target()) {
- ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ ret = cpufreq_exit_governor(policy);
if (ret)
pr_err("%s: Failed to exit governor\n", __func__);
}
@@ -1447,8 +1517,12 @@ static unsigned int __cpufreq_get(struct cpufreq_policy *policy)
ret_freq = cpufreq_driver->get(policy->cpu);
- /* Updating inactive policies is invalid, so avoid doing that. */
- if (unlikely(policy_is_inactive(policy)))
+ /*
+ * Updating inactive policies is invalid, so avoid doing that. Also
+ * if fast frequency switching is used with the given policy, the check
+ * against policy->cur is pointless, so skip it in that case too.
+ */
+ if (unlikely(policy_is_inactive(policy)) || policy->fast_switch_enabled)
return ret_freq;
if (ret_freq && policy->cur &&
@@ -1675,8 +1749,18 @@ int cpufreq_register_notifier(struct notifier_block *nb, unsigned int list)
switch (list) {
case CPUFREQ_TRANSITION_NOTIFIER:
+ mutex_lock(&cpufreq_fast_switch_lock);
+
+ if (cpufreq_fast_switch_count > 0) {
+ mutex_unlock(&cpufreq_fast_switch_lock);
+ return -EBUSY;
+ }
ret = srcu_notifier_chain_register(
&cpufreq_transition_notifier_list, nb);
+ if (!ret)
+ cpufreq_fast_switch_count--;
+
+ mutex_unlock(&cpufreq_fast_switch_lock);
break;
case CPUFREQ_POLICY_NOTIFIER:
ret = blocking_notifier_chain_register(
@@ -1709,8 +1793,14 @@ int cpufreq_unregister_notifier(struct notifier_block *nb, unsigned int list)
switch (list) {
case CPUFREQ_TRANSITION_NOTIFIER:
+ mutex_lock(&cpufreq_fast_switch_lock);
+
ret = srcu_notifier_chain_unregister(
&cpufreq_transition_notifier_list, nb);
+ if (!ret && !WARN_ON(cpufreq_fast_switch_count >= 0))
+ cpufreq_fast_switch_count++;
+
+ mutex_unlock(&cpufreq_fast_switch_lock);
break;
case CPUFREQ_POLICY_NOTIFIER:
ret = blocking_notifier_chain_unregister(
@@ -1729,6 +1819,37 @@ EXPORT_SYMBOL(cpufreq_unregister_notifier);
* GOVERNORS *
*********************************************************************/
+/**
+ * cpufreq_driver_fast_switch - Carry out a fast CPU frequency switch.
+ * @policy: cpufreq policy to switch the frequency for.
+ * @target_freq: New frequency to set (may be approximate).
+ *
+ * Carry out a fast frequency switch without sleeping.
+ *
+ * The driver's ->fast_switch() callback invoked by this function must be
+ * suitable for being called from within RCU-sched read-side critical sections
+ * and it is expected to select the minimum available frequency greater than or
+ * equal to @target_freq (CPUFREQ_RELATION_L).
+ *
+ * This function must not be called if policy->fast_switch_enabled is unset.
+ *
+ * Governors calling this function must guarantee that it will never be invoked
+ * twice in parallel for the same policy and that it will never be called in
+ * parallel with either ->target() or ->target_index() for the same policy.
+ *
+ * If CPUFREQ_ENTRY_INVALID is returned by the driver's ->fast_switch()
+ * callback to indicate an error condition, the hardware configuration must be
+ * preserved.
+ */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq)
+{
+ clamp_val(target_freq, policy->min, policy->max);
+
+ return cpufreq_driver->fast_switch(policy, target_freq);
+}
+EXPORT_SYMBOL_GPL(cpufreq_driver_fast_switch);
+
/* Must set freqs->new to intermediate frequency */
static int __target_intermediate(struct cpufreq_policy *policy,
struct cpufreq_freqs *freqs, int index)
@@ -2104,7 +2225,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
return ret;
}
- ret = cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ ret = cpufreq_exit_governor(policy);
if (ret) {
pr_err("%s: Failed to Exit Governor: %s (%d)\n",
__func__, old_gov->name, ret);
@@ -2121,7 +2242,7 @@ static int cpufreq_set_policy(struct cpufreq_policy *policy,
pr_debug("cpufreq: governor change\n");
return 0;
}
- cpufreq_governor(policy, CPUFREQ_GOV_POLICY_EXIT);
+ cpufreq_exit_governor(policy);
}
/* new governor failed, so re-start old one */
@@ -2189,16 +2310,13 @@ static int cpufreq_cpu_callback(struct notifier_block *nfb,
switch (action & ~CPU_TASKS_FROZEN) {
case CPU_ONLINE:
+ case CPU_DOWN_FAILED:
cpufreq_online(cpu);
break;
case CPU_DOWN_PREPARE:
cpufreq_offline(cpu);
break;
-
- case CPU_DOWN_FAILED:
- cpufreq_online(cpu);
- break;
}
return NOTIFY_OK;
}
diff --git a/drivers/cpufreq/cpufreq_conservative.c b/drivers/cpufreq/cpufreq_conservative.c
index bf4913f6453b..316df247e00d 100644
--- a/drivers/cpufreq/cpufreq_conservative.c
+++ b/drivers/cpufreq/cpufreq_conservative.c
@@ -129,9 +129,10 @@ static struct notifier_block cs_cpufreq_notifier_block = {
/************************** sysfs interface ************************/
static struct dbs_governor cs_dbs_gov;
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
@@ -143,9 +144,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
return count;
}
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
@@ -158,9 +160,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
return count;
}
-static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_down_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
@@ -175,9 +178,10 @@ static ssize_t store_down_threshold(struct dbs_data *dbs_data, const char *buf,
return count;
}
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
@@ -199,9 +203,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
return count;
}
-static ssize_t store_freq_step(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_freq_step(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct cs_dbs_tuners *cs_tuners = dbs_data->tuners;
unsigned int input;
int ret;
diff --git a/drivers/cpufreq/cpufreq_governor.c b/drivers/cpufreq/cpufreq_governor.c
index 10a5cfeae8c5..eb2fdbd9433c 100644
--- a/drivers/cpufreq/cpufreq_governor.c
+++ b/drivers/cpufreq/cpufreq_governor.c
@@ -43,9 +43,10 @@ static DEFINE_MUTEX(gov_dbs_data_mutex);
* This must be called with dbs_data->mutex held, otherwise traversing
* policy_dbs_list isn't safe.
*/
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct policy_dbs_info *policy_dbs;
unsigned int rate;
int ret;
@@ -59,7 +60,7 @@ ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
* We are operating under dbs_data->mutex and so the list and its
* entries can't be freed concurrently.
*/
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
mutex_lock(&policy_dbs->timer_mutex);
/*
* On 32-bit architectures this may race with the
@@ -96,13 +97,13 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
{
struct policy_dbs_info *policy_dbs;
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &dbs_data->attr_set.policy_list, list) {
unsigned int j;
for_each_cpu(j, policy_dbs->policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall,
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time,
dbs_data->io_is_busy);
if (dbs_data->ignore_nice_load)
j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
@@ -111,54 +112,6 @@ void gov_update_cpu_data(struct dbs_data *dbs_data)
}
EXPORT_SYMBOL_GPL(gov_update_cpu_data);
-static inline struct dbs_data *to_dbs_data(struct kobject *kobj)
-{
- return container_of(kobj, struct dbs_data, kobj);
-}
-
-static inline struct governor_attr *to_gov_attr(struct attribute *attr)
-{
- return container_of(attr, struct governor_attr, attr);
-}
-
-static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
- char *buf)
-{
- struct dbs_data *dbs_data = to_dbs_data(kobj);
- struct governor_attr *gattr = to_gov_attr(attr);
-
- return gattr->show(dbs_data, buf);
-}
-
-static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
- const char *buf, size_t count)
-{
- struct dbs_data *dbs_data = to_dbs_data(kobj);
- struct governor_attr *gattr = to_gov_attr(attr);
- int ret = -EBUSY;
-
- mutex_lock(&dbs_data->mutex);
-
- if (dbs_data->usage_count)
- ret = gattr->store(dbs_data, buf, count);
-
- mutex_unlock(&dbs_data->mutex);
-
- return ret;
-}
-
-/*
- * Sysfs Ops for accessing governor attributes.
- *
- * All show/store invocations for governor specific sysfs attributes, will first
- * call the below show/store callbacks and the attribute specific callback will
- * be called from within it.
- */
-static const struct sysfs_ops governor_sysfs_ops = {
- .show = governor_show,
- .store = governor_store,
-};
-
unsigned int dbs_update(struct cpufreq_policy *policy)
{
struct policy_dbs_info *policy_dbs = policy->governor_data;
@@ -184,21 +137,17 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
/* Get Absolute Load */
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- u64 cur_wall_time, cur_idle_time;
- unsigned int idle_time, wall_time;
+ u64 update_time, cur_idle_time;
+ unsigned int idle_time, time_elapsed;
unsigned int load;
- cur_idle_time = get_cpu_idle_time(j, &cur_wall_time, io_busy);
+ cur_idle_time = get_cpu_idle_time(j, &update_time, io_busy);
- wall_time = cur_wall_time - j_cdbs->prev_cpu_wall;
- j_cdbs->prev_cpu_wall = cur_wall_time;
+ time_elapsed = update_time - j_cdbs->prev_update_time;
+ j_cdbs->prev_update_time = update_time;
- if (cur_idle_time <= j_cdbs->prev_cpu_idle) {
- idle_time = 0;
- } else {
- idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
- j_cdbs->prev_cpu_idle = cur_idle_time;
- }
+ idle_time = cur_idle_time - j_cdbs->prev_cpu_idle;
+ j_cdbs->prev_cpu_idle = cur_idle_time;
if (ignore_nice) {
u64 cur_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
@@ -207,7 +156,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
j_cdbs->prev_cpu_nice = cur_nice;
}
- if (unlikely(!wall_time || wall_time < idle_time))
+ if (unlikely(!time_elapsed || time_elapsed < idle_time))
continue;
/*
@@ -228,7 +177,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
*
* Detecting this situation is easy: the governor's utilization
* update handler would not have run during CPU-idle periods.
- * Hence, an unusually large 'wall_time' (as compared to the
+ * Hence, an unusually large 'time_elapsed' (as compared to the
* sampling rate) indicates this scenario.
*
* prev_load can be zero in two cases and we must recalculate it
@@ -236,7 +185,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
* - during long idle intervals
* - explicitly set to zero
*/
- if (unlikely(wall_time > (2 * sampling_rate) &&
+ if (unlikely(time_elapsed > 2 * sampling_rate &&
j_cdbs->prev_load)) {
load = j_cdbs->prev_load;
@@ -247,7 +196,7 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
*/
j_cdbs->prev_load = 0;
} else {
- load = 100 * (wall_time - idle_time) / wall_time;
+ load = 100 * (time_elapsed - idle_time) / time_elapsed;
j_cdbs->prev_load = load;
}
@@ -258,43 +207,6 @@ unsigned int dbs_update(struct cpufreq_policy *policy)
}
EXPORT_SYMBOL_GPL(dbs_update);
-static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
- unsigned int delay_us)
-{
- struct cpufreq_policy *policy = policy_dbs->policy;
- int cpu;
-
- gov_update_sample_delay(policy_dbs, delay_us);
- policy_dbs->last_sample_time = 0;
-
- for_each_cpu(cpu, policy->cpus) {
- struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
-
- cpufreq_set_update_util_data(cpu, &cdbs->update_util);
- }
-}
-
-static inline void gov_clear_update_util(struct cpufreq_policy *policy)
-{
- int i;
-
- for_each_cpu(i, policy->cpus)
- cpufreq_set_update_util_data(i, NULL);
-
- synchronize_sched();
-}
-
-static void gov_cancel_work(struct cpufreq_policy *policy)
-{
- struct policy_dbs_info *policy_dbs = policy->governor_data;
-
- gov_clear_update_util(policy_dbs->policy);
- irq_work_sync(&policy_dbs->irq_work);
- cancel_work_sync(&policy_dbs->work);
- atomic_set(&policy_dbs->work_count, 0);
- policy_dbs->work_in_progress = false;
-}
-
static void dbs_work_handler(struct work_struct *work)
{
struct policy_dbs_info *policy_dbs;
@@ -382,6 +294,44 @@ static void dbs_update_util_handler(struct update_util_data *data, u64 time,
irq_work_queue(&policy_dbs->irq_work);
}
+static void gov_set_update_util(struct policy_dbs_info *policy_dbs,
+ unsigned int delay_us)
+{
+ struct cpufreq_policy *policy = policy_dbs->policy;
+ int cpu;
+
+ gov_update_sample_delay(policy_dbs, delay_us);
+ policy_dbs->last_sample_time = 0;
+
+ for_each_cpu(cpu, policy->cpus) {
+ struct cpu_dbs_info *cdbs = &per_cpu(cpu_dbs, cpu);
+
+ cpufreq_add_update_util_hook(cpu, &cdbs->update_util,
+ dbs_update_util_handler);
+ }
+}
+
+static inline void gov_clear_update_util(struct cpufreq_policy *policy)
+{
+ int i;
+
+ for_each_cpu(i, policy->cpus)
+ cpufreq_remove_update_util_hook(i);
+
+ synchronize_sched();
+}
+
+static void gov_cancel_work(struct cpufreq_policy *policy)
+{
+ struct policy_dbs_info *policy_dbs = policy->governor_data;
+
+ gov_clear_update_util(policy_dbs->policy);
+ irq_work_sync(&policy_dbs->irq_work);
+ cancel_work_sync(&policy_dbs->work);
+ atomic_set(&policy_dbs->work_count, 0);
+ policy_dbs->work_in_progress = false;
+}
+
static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *policy,
struct dbs_governor *gov)
{
@@ -404,7 +354,6 @@ static struct policy_dbs_info *alloc_policy_dbs_info(struct cpufreq_policy *poli
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
j_cdbs->policy_dbs = policy_dbs;
- j_cdbs->update_util.func = dbs_update_util_handler;
}
return policy_dbs;
}
@@ -453,10 +402,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
policy_dbs->dbs_data = dbs_data;
policy->governor_data = policy_dbs;
- mutex_lock(&dbs_data->mutex);
- dbs_data->usage_count++;
- list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
- mutex_unlock(&dbs_data->mutex);
+ gov_attr_set_get(&dbs_data->attr_set, &policy_dbs->list);
goto out;
}
@@ -466,8 +412,7 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
goto free_policy_dbs_info;
}
- INIT_LIST_HEAD(&dbs_data->policy_dbs_list);
- mutex_init(&dbs_data->mutex);
+ gov_attr_set_init(&dbs_data->attr_set, &policy_dbs->list);
ret = gov->init(dbs_data, !policy->governor->initialized);
if (ret)
@@ -487,14 +432,11 @@ static int cpufreq_governor_init(struct cpufreq_policy *policy)
if (!have_governor_per_policy())
gov->gdbs_data = dbs_data;
- policy->governor_data = policy_dbs;
-
policy_dbs->dbs_data = dbs_data;
- dbs_data->usage_count = 1;
- list_add(&policy_dbs->list, &dbs_data->policy_dbs_list);
+ policy->governor_data = policy_dbs;
gov->kobj_type.sysfs_ops = &governor_sysfs_ops;
- ret = kobject_init_and_add(&dbs_data->kobj, &gov->kobj_type,
+ ret = kobject_init_and_add(&dbs_data->attr_set.kobj, &gov->kobj_type,
get_governor_parent_kobj(policy),
"%s", gov->gov.name);
if (!ret)
@@ -523,29 +465,21 @@ static int cpufreq_governor_exit(struct cpufreq_policy *policy)
struct dbs_governor *gov = dbs_governor_of(policy);
struct policy_dbs_info *policy_dbs = policy->governor_data;
struct dbs_data *dbs_data = policy_dbs->dbs_data;
- int count;
+ unsigned int count;
/* Protect gov->gdbs_data against concurrent updates. */
mutex_lock(&gov_dbs_data_mutex);
- mutex_lock(&dbs_data->mutex);
- list_del(&policy_dbs->list);
- count = --dbs_data->usage_count;
- mutex_unlock(&dbs_data->mutex);
+ count = gov_attr_set_put(&dbs_data->attr_set, &policy_dbs->list);
- if (!count) {
- kobject_put(&dbs_data->kobj);
-
- policy->governor_data = NULL;
+ policy->governor_data = NULL;
+ if (!count) {
if (!have_governor_per_policy())
gov->gdbs_data = NULL;
gov->exit(dbs_data, policy->governor->initialized == 1);
- mutex_destroy(&dbs_data->mutex);
kfree(dbs_data);
- } else {
- policy->governor_data = NULL;
}
free_policy_dbs_info(policy_dbs, gov);
@@ -574,12 +508,12 @@ static int cpufreq_governor_start(struct cpufreq_policy *policy)
for_each_cpu(j, policy->cpus) {
struct cpu_dbs_info *j_cdbs = &per_cpu(cpu_dbs, j);
- unsigned int prev_load;
- j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_cpu_wall, io_busy);
-
- prev_load = j_cdbs->prev_cpu_wall - j_cdbs->prev_cpu_idle;
- j_cdbs->prev_load = 100 * prev_load / (unsigned int)j_cdbs->prev_cpu_wall;
+ j_cdbs->prev_cpu_idle = get_cpu_idle_time(j, &j_cdbs->prev_update_time, io_busy);
+ /*
+ * Make the first invocation of dbs_update() compute the load.
+ */
+ j_cdbs->prev_load = 0;
if (ignore_nice)
j_cdbs->prev_cpu_nice = kcpustat_cpu(j).cpustat[CPUTIME_NICE];
diff --git a/drivers/cpufreq/cpufreq_governor.h b/drivers/cpufreq/cpufreq_governor.h
index 61ff82fe0613..34eb214b6d57 100644
--- a/drivers/cpufreq/cpufreq_governor.h
+++ b/drivers/cpufreq/cpufreq_governor.h
@@ -24,20 +24,6 @@
#include <linux/module.h>
#include <linux/mutex.h>
-/*
- * The polling frequency depends on the capability of the processor. Default
- * polling frequency is 1000 times the transition latency of the processor. The
- * governor will work on any processor with transition latency <= 10ms, using
- * appropriate sampling rate.
- *
- * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
- * this governor will not work. All times here are in us (micro seconds).
- */
-#define MIN_SAMPLING_RATE_RATIO (2)
-#define LATENCY_MULTIPLIER (1000)
-#define MIN_LATENCY_MULTIPLIER (20)
-#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
-
/* Ondemand Sampling types */
enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
@@ -52,7 +38,7 @@ enum {OD_NORMAL_SAMPLE, OD_SUB_SAMPLE};
/* Governor demand based switching data (per-policy or global). */
struct dbs_data {
- int usage_count;
+ struct gov_attr_set attr_set;
void *tuners;
unsigned int min_sampling_rate;
unsigned int ignore_nice_load;
@@ -60,37 +46,27 @@ struct dbs_data {
unsigned int sampling_down_factor;
unsigned int up_threshold;
unsigned int io_is_busy;
-
- struct kobject kobj;
- struct list_head policy_dbs_list;
- /*
- * Protect concurrent updates to governor tunables from sysfs,
- * policy_dbs_list and usage_count.
- */
- struct mutex mutex;
};
-/* Governor's specific attributes */
-struct dbs_data;
-struct governor_attr {
- struct attribute attr;
- ssize_t (*show)(struct dbs_data *dbs_data, char *buf);
- ssize_t (*store)(struct dbs_data *dbs_data, const char *buf,
- size_t count);
-};
+static inline struct dbs_data *to_dbs_data(struct gov_attr_set *attr_set)
+{
+ return container_of(attr_set, struct dbs_data, attr_set);
+}
#define gov_show_one(_gov, file_name) \
static ssize_t show_##file_name \
-(struct dbs_data *dbs_data, char *buf) \
+(struct gov_attr_set *attr_set, char *buf) \
{ \
+ struct dbs_data *dbs_data = to_dbs_data(attr_set); \
struct _gov##_dbs_tuners *tuners = dbs_data->tuners; \
return sprintf(buf, "%u\n", tuners->file_name); \
}
#define gov_show_one_common(file_name) \
static ssize_t show_##file_name \
-(struct dbs_data *dbs_data, char *buf) \
+(struct gov_attr_set *attr_set, char *buf) \
{ \
+ struct dbs_data *dbs_data = to_dbs_data(attr_set); \
return sprintf(buf, "%u\n", dbs_data->file_name); \
}
@@ -135,7 +111,7 @@ static inline void gov_update_sample_delay(struct policy_dbs_info *policy_dbs,
/* Per cpu structures */
struct cpu_dbs_info {
u64 prev_cpu_idle;
- u64 prev_cpu_wall;
+ u64 prev_update_time;
u64 prev_cpu_nice;
/*
* Used to keep track of load in the previous interval. However, when
@@ -184,7 +160,7 @@ void od_register_powersave_bias_handler(unsigned int (*f)
(struct cpufreq_policy *, unsigned int, unsigned int),
unsigned int powersave_bias);
void od_unregister_powersave_bias_handler(void);
-ssize_t store_sampling_rate(struct dbs_data *dbs_data, const char *buf,
+ssize_t store_sampling_rate(struct gov_attr_set *attr_set, const char *buf,
size_t count);
void gov_update_cpu_data(struct dbs_data *dbs_data);
#endif /* _CPUFREQ_GOVERNOR_H */
diff --git a/drivers/cpufreq/cpufreq_governor_attr_set.c b/drivers/cpufreq/cpufreq_governor_attr_set.c
new file mode 100644
index 000000000000..52841f807a7e
--- /dev/null
+++ b/drivers/cpufreq/cpufreq_governor_attr_set.c
@@ -0,0 +1,84 @@
+/*
+ * Abstract code for CPUFreq governor tunable sysfs attributes.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "cpufreq_governor.h"
+
+static inline struct gov_attr_set *to_gov_attr_set(struct kobject *kobj)
+{
+ return container_of(kobj, struct gov_attr_set, kobj);
+}
+
+static inline struct governor_attr *to_gov_attr(struct attribute *attr)
+{
+ return container_of(attr, struct governor_attr, attr);
+}
+
+static ssize_t governor_show(struct kobject *kobj, struct attribute *attr,
+ char *buf)
+{
+ struct governor_attr *gattr = to_gov_attr(attr);
+
+ return gattr->show(to_gov_attr_set(kobj), buf);
+}
+
+static ssize_t governor_store(struct kobject *kobj, struct attribute *attr,
+ const char *buf, size_t count)
+{
+ struct gov_attr_set *attr_set = to_gov_attr_set(kobj);
+ struct governor_attr *gattr = to_gov_attr(attr);
+ int ret;
+
+ mutex_lock(&attr_set->update_lock);
+ ret = attr_set->usage_count ? gattr->store(attr_set, buf, count) : -EBUSY;
+ mutex_unlock(&attr_set->update_lock);
+ return ret;
+}
+
+const struct sysfs_ops governor_sysfs_ops = {
+ .show = governor_show,
+ .store = governor_store,
+};
+EXPORT_SYMBOL_GPL(governor_sysfs_ops);
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ INIT_LIST_HEAD(&attr_set->policy_list);
+ mutex_init(&attr_set->update_lock);
+ attr_set->usage_count = 1;
+ list_add(list_node, &attr_set->policy_list);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_init);
+
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ mutex_lock(&attr_set->update_lock);
+ attr_set->usage_count++;
+ list_add(list_node, &attr_set->policy_list);
+ mutex_unlock(&attr_set->update_lock);
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_get);
+
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node)
+{
+ unsigned int count;
+
+ mutex_lock(&attr_set->update_lock);
+ list_del(list_node);
+ count = --attr_set->usage_count;
+ mutex_unlock(&attr_set->update_lock);
+ if (count)
+ return count;
+
+ kobject_put(&attr_set->kobj);
+ mutex_destroy(&attr_set->update_lock);
+ return 0;
+}
+EXPORT_SYMBOL_GPL(gov_attr_set_put);
diff --git a/drivers/cpufreq/cpufreq_ondemand.c b/drivers/cpufreq/cpufreq_ondemand.c
index acd80272ded6..300163430516 100644
--- a/drivers/cpufreq/cpufreq_ondemand.c
+++ b/drivers/cpufreq/cpufreq_ondemand.c
@@ -207,9 +207,10 @@ static unsigned int od_dbs_timer(struct cpufreq_policy *policy)
/************************** sysfs interface ************************/
static struct dbs_governor od_dbs_gov;
-static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_io_is_busy(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
@@ -224,9 +225,10 @@ static ssize_t store_io_is_busy(struct dbs_data *dbs_data, const char *buf,
return count;
}
-static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_up_threshold(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
ret = sscanf(buf, "%u", &input);
@@ -240,9 +242,10 @@ static ssize_t store_up_threshold(struct dbs_data *dbs_data, const char *buf,
return count;
}
-static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_sampling_down_factor(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct policy_dbs_info *policy_dbs;
unsigned int input;
int ret;
@@ -254,7 +257,7 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
dbs_data->sampling_down_factor = input;
/* Reset down sampling multiplier in case it was active */
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list) {
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list) {
/*
* Doing this without locking might lead to using different
* rate_mult values in od_update() and od_dbs_timer().
@@ -267,9 +270,10 @@ static ssize_t store_sampling_down_factor(struct dbs_data *dbs_data,
return count;
}
-static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
- const char *buf, size_t count)
+static ssize_t store_ignore_nice_load(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
unsigned int input;
int ret;
@@ -291,9 +295,10 @@ static ssize_t store_ignore_nice_load(struct dbs_data *dbs_data,
return count;
}
-static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf,
- size_t count)
+static ssize_t store_powersave_bias(struct gov_attr_set *attr_set,
+ const char *buf, size_t count)
{
+ struct dbs_data *dbs_data = to_dbs_data(attr_set);
struct od_dbs_tuners *od_tuners = dbs_data->tuners;
struct policy_dbs_info *policy_dbs;
unsigned int input;
@@ -308,7 +313,7 @@ static ssize_t store_powersave_bias(struct dbs_data *dbs_data, const char *buf,
od_tuners->powersave_bias = input;
- list_for_each_entry(policy_dbs, &dbs_data->policy_dbs_list, list)
+ list_for_each_entry(policy_dbs, &attr_set->policy_list, list)
ondemand_powersave_bias_init(policy_dbs->policy);
return count;
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 4085244c8a67..cdf097b29862 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -6,6 +6,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -20,7 +22,7 @@
#include <asm/msr.h>
#include <asm/tsc.h>
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
#include <linux/acpi.h>
#include <acpi/processor.h>
#endif
@@ -33,7 +35,7 @@
struct eps_cpu_data {
u32 fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
u32 bios_limit;
#endif
struct cpufreq_frequency_table freq_table[];
@@ -46,7 +48,7 @@ static int freq_failsafe_off;
static int voltage_failsafe_off;
static int set_max_voltage;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
static int ignore_acpi_limit;
static struct acpi_processor_performance *eps_acpi_cpu_perf;
@@ -141,11 +143,9 @@ static int eps_set_state(struct eps_cpu_data *centaur,
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
- printk(KERN_INFO "eps: Current voltage = %dmV\n",
- current_voltage * 16 + 700);
+ pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
current_multiplier = (lo >> 8) & 0xff;
- printk(KERN_INFO "eps: Current multiplier = %d\n",
- current_multiplier);
+ pr_info("Current multiplier = %d\n", current_multiplier);
}
#endif
return 0;
@@ -166,7 +166,7 @@ static int eps_target(struct cpufreq_policy *policy, unsigned int index)
dest_state = centaur->freq_table[index].driver_data & 0xffff;
ret = eps_set_state(centaur, policy, dest_state);
if (ret)
- printk(KERN_ERR "eps: Timeout!\n");
+ pr_err("Timeout!\n");
return ret;
}
@@ -186,7 +186,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
int k, step, voltage;
int ret;
int states;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
unsigned int limit;
#endif
@@ -194,36 +194,36 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
return -ENODEV;
/* Check brand */
- printk(KERN_INFO "eps: Detected VIA ");
+ pr_info("Detected VIA ");
switch (c->x86_model) {
case 10:
rdmsr(0x1153, lo, hi);
brand = (((lo >> 2) ^ lo) >> 18) & 3;
- printk(KERN_CONT "Model A ");
+ pr_cont("Model A ");
break;
case 13:
rdmsr(0x1154, lo, hi);
brand = (((lo >> 4) ^ (lo >> 2))) & 0x000000ff;
- printk(KERN_CONT "Model D ");
+ pr_cont("Model D ");
break;
}
switch (brand) {
case EPS_BRAND_C7M:
- printk(KERN_CONT "C7-M\n");
+ pr_cont("C7-M\n");
break;
case EPS_BRAND_C7:
- printk(KERN_CONT "C7\n");
+ pr_cont("C7\n");
break;
case EPS_BRAND_EDEN:
- printk(KERN_CONT "Eden\n");
+ pr_cont("Eden\n");
break;
case EPS_BRAND_C7D:
- printk(KERN_CONT "C7-D\n");
+ pr_cont("C7-D\n");
break;
case EPS_BRAND_C3:
- printk(KERN_CONT "C3\n");
+ pr_cont("C3\n");
return -ENODEV;
break;
}
@@ -235,7 +235,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Can be locked at 0 */
rdmsrl(MSR_IA32_MISC_ENABLE, val);
if (!(val & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
- printk(KERN_INFO "eps: Can't enable Enhanced PowerSaver\n");
+ pr_info("Can't enable Enhanced PowerSaver\n");
return -ENODEV;
}
}
@@ -243,22 +243,19 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Print voltage and multiplier */
rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
current_voltage = lo & 0xff;
- printk(KERN_INFO "eps: Current voltage = %dmV\n",
- current_voltage * 16 + 700);
+ pr_info("Current voltage = %dmV\n", current_voltage * 16 + 700);
current_multiplier = (lo >> 8) & 0xff;
- printk(KERN_INFO "eps: Current multiplier = %d\n", current_multiplier);
+ pr_info("Current multiplier = %d\n", current_multiplier);
/* Print limits */
max_voltage = hi & 0xff;
- printk(KERN_INFO "eps: Highest voltage = %dmV\n",
- max_voltage * 16 + 700);
+ pr_info("Highest voltage = %dmV\n", max_voltage * 16 + 700);
max_multiplier = (hi >> 8) & 0xff;
- printk(KERN_INFO "eps: Highest multiplier = %d\n", max_multiplier);
+ pr_info("Highest multiplier = %d\n", max_multiplier);
min_voltage = (hi >> 16) & 0xff;
- printk(KERN_INFO "eps: Lowest voltage = %dmV\n",
- min_voltage * 16 + 700);
+ pr_info("Lowest voltage = %dmV\n", min_voltage * 16 + 700);
min_multiplier = (hi >> 24) & 0xff;
- printk(KERN_INFO "eps: Lowest multiplier = %d\n", min_multiplier);
+ pr_info("Lowest multiplier = %d\n", min_multiplier);
/* Sanity checks */
if (current_multiplier == 0 || max_multiplier == 0
@@ -276,34 +273,30 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Check for systems using underclocked CPU */
if (!freq_failsafe_off && max_multiplier != current_multiplier) {
- printk(KERN_INFO "eps: Your processor is running at different "
- "frequency then its maximum. Aborting.\n");
- printk(KERN_INFO "eps: You can use freq_failsafe_off option "
- "to disable this check.\n");
+ pr_info("Your processor is running at different frequency then its maximum. Aborting.\n");
+ pr_info("You can use freq_failsafe_off option to disable this check.\n");
return -EINVAL;
}
if (!voltage_failsafe_off && max_voltage != current_voltage) {
- printk(KERN_INFO "eps: Your processor is running at different "
- "voltage then its maximum. Aborting.\n");
- printk(KERN_INFO "eps: You can use voltage_failsafe_off "
- "option to disable this check.\n");
+ pr_info("Your processor is running at different voltage then its maximum. Aborting.\n");
+ pr_info("You can use voltage_failsafe_off option to disable this check.\n");
return -EINVAL;
}
/* Calc FSB speed */
fsb = cpu_khz / current_multiplier;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
/* Check for ACPI processor speed limit */
if (!ignore_acpi_limit && !eps_acpi_init()) {
if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
- printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+ pr_info("ACPI limit %u.%uGHz\n",
limit/1000000,
(limit%1000000)/10000);
eps_acpi_exit(policy);
/* Check if max_multiplier is in BIOS limits */
if (limit && max_multiplier * fsb > limit) {
- printk(KERN_INFO "eps: Aborting.\n");
+ pr_info("Aborting\n");
return -EINVAL;
}
}
@@ -319,8 +312,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
v = (set_max_voltage - 700) / 16;
/* Check if voltage is within limits */
if (v >= min_voltage && v <= max_voltage) {
- printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
- v * 16 + 700);
+ pr_info("Setting %dmV as maximum\n", v * 16 + 700);
max_voltage = v;
}
}
@@ -341,7 +333,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
/* Copy basic values */
centaur->fsb = fsb;
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
centaur->bios_limit = limit;
#endif
@@ -426,7 +418,7 @@ module_param(freq_failsafe_off, int, 0644);
MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
module_param(voltage_failsafe_off, int, 0644);
MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
-#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#if IS_ENABLED(CONFIG_ACPI_PROCESSOR)
module_param(ignore_acpi_limit, int, 0644);
MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
#endif
diff --git a/drivers/cpufreq/elanfreq.c b/drivers/cpufreq/elanfreq.c
index 1c06e786c9ba..bfce11cba1df 100644
--- a/drivers/cpufreq/elanfreq.c
+++ b/drivers/cpufreq/elanfreq.c
@@ -16,6 +16,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -185,7 +187,7 @@ static int elanfreq_cpu_init(struct cpufreq_policy *policy)
static int __init elanfreq_setup(char *str)
{
max_freq = simple_strtoul(str, &str, 0);
- printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
+ pr_warn("You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
return 1;
}
__setup("elanfreq=", elanfreq_setup);
diff --git a/drivers/cpufreq/hisi-acpu-cpufreq.c b/drivers/cpufreq/hisi-acpu-cpufreq.c
deleted file mode 100644
index 026d5b2224de..000000000000
--- a/drivers/cpufreq/hisi-acpu-cpufreq.c
+++ /dev/null
@@ -1,42 +0,0 @@
-/*
- * Hisilicon Platforms Using ACPU CPUFreq Support
- *
- * Copyright (c) 2015 Hisilicon Limited.
- * Copyright (c) 2015 Linaro Limited.
- *
- * Leo Yan <leo.yan@linaro.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-
-static int __init hisi_acpu_cpufreq_driver_init(void)
-{
- struct platform_device *pdev;
-
- if (!of_machine_is_compatible("hisilicon,hi6220"))
- return -ENODEV;
-
- pdev = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
- return PTR_ERR_OR_ZERO(pdev);
-}
-module_init(hisi_acpu_cpufreq_driver_init);
-
-MODULE_AUTHOR("Leo Yan <leo.yan@linaro.org>");
-MODULE_DESCRIPTION("Hisilicon acpu cpufreq driver");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/ia64-acpi-cpufreq.c b/drivers/cpufreq/ia64-acpi-cpufreq.c
index 0202429f1c5b..759612da4fdc 100644
--- a/drivers/cpufreq/ia64-acpi-cpufreq.c
+++ b/drivers/cpufreq/ia64-acpi-cpufreq.c
@@ -8,6 +8,8 @@
* Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/module.h>
@@ -118,8 +120,7 @@ processor_get_freq (
if (ret) {
set_cpus_allowed_ptr(current, &saved_mask);
- printk(KERN_WARNING "get performance failed with error %d\n",
- ret);
+ pr_warn("get performance failed with error %d\n", ret);
ret = 0;
goto migrate_end;
}
@@ -177,7 +178,7 @@ processor_set_freq (
ret = processor_set_pstate(value);
if (ret) {
- printk(KERN_WARNING "Transition failed with error %d\n", ret);
+ pr_warn("Transition failed with error %d\n", ret);
retval = -ENODEV;
goto migrate_end;
}
@@ -291,8 +292,7 @@ acpi_cpufreq_cpu_init (
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- printk(KERN_INFO "acpi-cpufreq: CPU%u - ACPI performance management "
- "activated.\n", cpu);
+ pr_info("CPU%u - ACPI performance management activated\n", cpu);
for (i = 0; i < data->acpi_data.state_count; i++)
pr_debug(" %cP%d: %d MHz, %d mW, %d uS, %d uS, 0x%x 0x%x\n",
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index 30fe323c4551..a0823e84ceca 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -10,6 +10,8 @@
* of the License.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/kernel_stat.h>
#include <linux/module.h>
@@ -39,6 +41,10 @@
#define ATOM_TURBO_RATIOS 0x66c
#define ATOM_TURBO_VIDS 0x66d
+#ifdef CONFIG_ACPI
+#include <acpi/processor.h>
+#endif
+
#define FRAC_BITS 8
#define int_tofp(X) ((int64_t)(X) << FRAC_BITS)
#define fp_toint(X) ((X) >> FRAC_BITS)
@@ -172,6 +178,8 @@ struct _pid {
* @prev_cummulative_iowait: IO Wait time difference from last and
* current sample
* @sample: Storage for storing last Sample data
+ * @acpi_perf_data: Stores ACPI perf information read from _PSS
+ * @valid_pss_table: Set to true for valid ACPI _PSS entries found
*
* This structure stores per CPU instance data for all CPUs.
*/
@@ -190,6 +198,10 @@ struct cpudata {
u64 prev_tsc;
u64 prev_cummulative_iowait;
struct sample sample;
+#ifdef CONFIG_ACPI
+ struct acpi_processor_performance acpi_perf_data;
+ bool valid_pss_table;
+#endif
};
static struct cpudata **all_cpu_data;
@@ -258,6 +270,9 @@ static struct pstate_adjust_policy pid_params;
static struct pstate_funcs pstate_funcs;
static int hwp_active;
+#ifdef CONFIG_ACPI
+static bool acpi_ppc;
+#endif
/**
* struct perf_limits - Store user and policy limits
@@ -331,6 +346,121 @@ static struct perf_limits *limits = &performance_limits;
static struct perf_limits *limits = &powersave_limits;
#endif
+#ifdef CONFIG_ACPI
+
+static bool intel_pstate_get_ppc_enable_status(void)
+{
+ if (acpi_gbl_FADT.preferred_profile == PM_ENTERPRISE_SERVER ||
+ acpi_gbl_FADT.preferred_profile == PM_PERFORMANCE_SERVER)
+ return true;
+
+ return acpi_ppc;
+}
+
+/*
+ * The max target pstate ratio is a 8 bit value in both PLATFORM_INFO MSR and
+ * in TURBO_RATIO_LIMIT MSR, which pstate driver stores in max_pstate and
+ * max_turbo_pstate fields. The PERF_CTL MSR contains 16 bit value for P state
+ * ratio, out of it only high 8 bits are used. For example 0x1700 is setting
+ * target ratio 0x17. The _PSS control value stores in a format which can be
+ * directly written to PERF_CTL MSR. But in intel_pstate driver this shift
+ * occurs during write to PERF_CTL (E.g. for cores core_set_pstate()).
+ * This function converts the _PSS control value to intel pstate driver format
+ * for comparison and assignment.
+ */
+static int convert_to_native_pstate_format(struct cpudata *cpu, int index)
+{
+ return cpu->acpi_perf_data.states[index].control >> 8;
+}
+
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+ int turbo_pss_ctl;
+ int ret;
+ int i;
+
+ if (!intel_pstate_get_ppc_enable_status())
+ return;
+
+ cpu = all_cpu_data[policy->cpu];
+
+ ret = acpi_processor_register_performance(&cpu->acpi_perf_data,
+ policy->cpu);
+ if (ret)
+ return;
+
+ /*
+ * Check if the control value in _PSS is for PERF_CTL MSR, which should
+ * guarantee that the states returned by it map to the states in our
+ * list directly.
+ */
+ if (cpu->acpi_perf_data.control_register.space_id !=
+ ACPI_ADR_SPACE_FIXED_HARDWARE)
+ goto err;
+
+ /*
+ * If there is only one entry _PSS, simply ignore _PSS and continue as
+ * usual without taking _PSS into account
+ */
+ if (cpu->acpi_perf_data.state_count < 2)
+ goto err;
+
+ pr_debug("CPU%u - ACPI _PSS perf data\n", policy->cpu);
+ for (i = 0; i < cpu->acpi_perf_data.state_count; i++) {
+ pr_debug(" %cP%d: %u MHz, %u mW, 0x%x\n",
+ (i == cpu->acpi_perf_data.state ? '*' : ' '), i,
+ (u32) cpu->acpi_perf_data.states[i].core_frequency,
+ (u32) cpu->acpi_perf_data.states[i].power,
+ (u32) cpu->acpi_perf_data.states[i].control);
+ }
+
+ /*
+ * The _PSS table doesn't contain whole turbo frequency range.
+ * This just contains +1 MHZ above the max non turbo frequency,
+ * with control value corresponding to max turbo ratio. But
+ * when cpufreq set policy is called, it will call with this
+ * max frequency, which will cause a reduced performance as
+ * this driver uses real max turbo frequency as the max
+ * frequency. So correct this frequency in _PSS table to
+ * correct max turbo frequency based on the turbo ratio.
+ * Also need to convert to MHz as _PSS freq is in MHz.
+ */
+ turbo_pss_ctl = convert_to_native_pstate_format(cpu, 0);
+ if (turbo_pss_ctl > cpu->pstate.max_pstate)
+ cpu->acpi_perf_data.states[0].core_frequency =
+ policy->cpuinfo.max_freq / 1000;
+ cpu->valid_pss_table = true;
+ pr_info("_PPC limits will be enforced\n");
+
+ return;
+
+ err:
+ cpu->valid_pss_table = false;
+ acpi_processor_unregister_performance(policy->cpu);
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+ struct cpudata *cpu;
+
+ cpu = all_cpu_data[policy->cpu];
+ if (!cpu->valid_pss_table)
+ return;
+
+ acpi_processor_unregister_performance(policy->cpu);
+}
+
+#else
+static void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
+{
+}
+
+static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
+{
+}
+#endif
+
static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
int deadband, int integral) {
pid->setpoint = int_tofp(setpoint);
@@ -341,17 +471,17 @@ static inline void pid_reset(struct _pid *pid, int setpoint, int busy,
static inline void pid_p_gain_set(struct _pid *pid, int percent)
{
- pid->p_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->p_gain = div_fp(percent, 100);
}
static inline void pid_i_gain_set(struct _pid *pid, int percent)
{
- pid->i_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->i_gain = div_fp(percent, 100);
}
static inline void pid_d_gain_set(struct _pid *pid, int percent)
{
- pid->d_gain = div_fp(int_tofp(percent), int_tofp(100));
+ pid->d_gain = div_fp(percent, 100);
}
static signed int pid_calc(struct _pid *pid, int32_t busy)
@@ -529,7 +659,7 @@ static ssize_t show_turbo_pct(struct kobject *kobj,
total = cpu->pstate.turbo_pstate - cpu->pstate.min_pstate + 1;
no_turbo = cpu->pstate.max_pstate - cpu->pstate.min_pstate + 1;
- turbo_fp = div_fp(int_tofp(no_turbo), int_tofp(total));
+ turbo_fp = div_fp(no_turbo, total);
turbo_pct = 100 - fp_toint(mul_fp(turbo_fp, int_tofp(100)));
return sprintf(buf, "%u\n", turbo_pct);
}
@@ -571,7 +701,7 @@ static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
update_turbo_state();
if (limits->turbo_disabled) {
- pr_warn("intel_pstate: Turbo disabled by BIOS or unavailable on processor\n");
+ pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
return -EPERM;
}
@@ -600,8 +730,7 @@ static ssize_t store_max_perf_pct(struct kobject *a, struct attribute *b,
limits->max_perf_pct);
limits->max_perf_pct = max(limits->min_perf_pct,
limits->max_perf_pct);
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
@@ -625,8 +754,7 @@ static ssize_t store_min_perf_pct(struct kobject *a, struct attribute *b,
limits->min_perf_pct);
limits->min_perf_pct = min(limits->max_perf_pct,
limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
if (hwp_active)
intel_pstate_hwp_set_online_cpus();
@@ -1011,8 +1139,8 @@ static inline void intel_pstate_calc_busy(struct cpudata *cpu)
struct sample *sample = &cpu->sample;
int64_t core_pct;
- core_pct = int_tofp(sample->aperf) * int_tofp(100);
- core_pct = div64_u64(core_pct, int_tofp(sample->mperf));
+ core_pct = sample->aperf * int_tofp(100);
+ core_pct = div64_u64(core_pct, sample->mperf);
sample->core_pct_busy = (int32_t)core_pct;
}
@@ -1061,6 +1189,12 @@ static inline int32_t get_avg_frequency(struct cpudata *cpu)
cpu->pstate.scaling, cpu->sample.mperf);
}
+static inline int32_t get_avg_pstate(struct cpudata *cpu)
+{
+ return div64_u64(cpu->pstate.max_pstate_physical * cpu->sample.aperf,
+ cpu->sample.mperf);
+}
+
static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
{
struct sample *sample = &cpu->sample;
@@ -1093,7 +1227,7 @@ static inline int32_t get_target_pstate_use_cpu_load(struct cpudata *cpu)
cpu_load = div64_u64(int_tofp(100) * mperf, sample->tsc);
cpu->sample.busy_scaled = cpu_load;
- return cpu->pstate.current_pstate - pid_calc(&cpu->pid, cpu_load);
+ return get_avg_pstate(cpu) - pid_calc(&cpu->pid, cpu_load);
}
static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
@@ -1115,8 +1249,8 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
* specified pstate.
*/
core_busy = cpu->sample.core_pct_busy;
- max_pstate = int_tofp(cpu->pstate.max_pstate_physical);
- current_pstate = int_tofp(cpu->pstate.current_pstate);
+ max_pstate = cpu->pstate.max_pstate_physical;
+ current_pstate = cpu->pstate.current_pstate;
core_busy = mul_fp(core_busy, div_fp(max_pstate, current_pstate));
/*
@@ -1127,8 +1261,7 @@ static inline int32_t get_target_pstate_use_performance(struct cpudata *cpu)
*/
duration_ns = cpu->sample.time - cpu->last_sample_time;
if ((s64)duration_ns > pid_params.sample_rate_ns * 3) {
- sample_ratio = div_fp(int_tofp(pid_params.sample_rate_ns),
- int_tofp(duration_ns));
+ sample_ratio = div_fp(pid_params.sample_rate_ns, duration_ns);
core_busy = mul_fp(core_busy, sample_ratio);
} else {
sample_ratio = div_fp(100 * cpu->sample.mperf, cpu->sample.tsc);
@@ -1246,9 +1379,7 @@ static int intel_pstate_init_cpu(unsigned int cpunum)
intel_pstate_busy_pid_reset(cpu);
- cpu->update_util.func = intel_pstate_update_util;
-
- pr_debug("intel_pstate: controlling: cpu %d\n", cpunum);
+ pr_debug("controlling: cpu %d\n", cpunum);
return 0;
}
@@ -1271,12 +1402,13 @@ static void intel_pstate_set_update_util_hook(unsigned int cpu_num)
/* Prevent intel_pstate_update_util() from using stale data. */
cpu->sample.time = 0;
- cpufreq_set_update_util_data(cpu_num, &cpu->update_util);
+ cpufreq_add_update_util_hook(cpu_num, &cpu->update_util,
+ intel_pstate_update_util);
}
static void intel_pstate_clear_update_util_hook(unsigned int cpu)
{
- cpufreq_set_update_util_data(cpu, NULL);
+ cpufreq_remove_update_util_hook(cpu);
synchronize_sched();
}
@@ -1296,20 +1428,31 @@ static void intel_pstate_set_performance_limits(struct perf_limits *limits)
static int intel_pstate_set_policy(struct cpufreq_policy *policy)
{
+ struct cpudata *cpu;
+
if (!policy->cpuinfo.max_freq)
return -ENODEV;
intel_pstate_clear_update_util_hook(policy->cpu);
+ cpu = all_cpu_data[0];
+ if (cpu->pstate.max_pstate_physical > cpu->pstate.max_pstate) {
+ if (policy->max < policy->cpuinfo.max_freq &&
+ policy->max > cpu->pstate.max_pstate * cpu->pstate.scaling) {
+ pr_debug("policy->max > max non turbo frequency\n");
+ policy->max = policy->cpuinfo.max_freq;
+ }
+ }
+
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
limits = &performance_limits;
if (policy->max >= policy->cpuinfo.max_freq) {
- pr_debug("intel_pstate: set performance\n");
+ pr_debug("set performance\n");
intel_pstate_set_performance_limits(limits);
goto out;
}
} else {
- pr_debug("intel_pstate: set powersave\n");
+ pr_debug("set powersave\n");
limits = &powersave_limits;
}
@@ -1333,10 +1476,8 @@ static int intel_pstate_set_policy(struct cpufreq_policy *policy)
/* Make sure min_perf_pct <= max_perf_pct */
limits->min_perf_pct = min(limits->max_perf_pct, limits->min_perf_pct);
- limits->min_perf = div_fp(int_tofp(limits->min_perf_pct),
- int_tofp(100));
- limits->max_perf = div_fp(int_tofp(limits->max_perf_pct),
- int_tofp(100));
+ limits->min_perf = div_fp(limits->min_perf_pct, 100);
+ limits->max_perf = div_fp(limits->max_perf_pct, 100);
out:
intel_pstate_set_update_util_hook(policy->cpu);
@@ -1363,7 +1504,7 @@ static void intel_pstate_stop_cpu(struct cpufreq_policy *policy)
int cpu_num = policy->cpu;
struct cpudata *cpu = all_cpu_data[cpu_num];
- pr_debug("intel_pstate: CPU %d exiting\n", cpu_num);
+ pr_debug("CPU %d exiting\n", cpu_num);
intel_pstate_clear_update_util_hook(cpu_num);
@@ -1396,18 +1537,27 @@ static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
policy->cpuinfo.max_freq =
cpu->pstate.turbo_pstate * cpu->pstate.scaling;
+ intel_pstate_init_acpi_perf_limits(policy);
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
return 0;
}
+static int intel_pstate_cpu_exit(struct cpufreq_policy *policy)
+{
+ intel_pstate_exit_perf_limits(policy);
+
+ return 0;
+}
+
static struct cpufreq_driver intel_pstate_driver = {
.flags = CPUFREQ_CONST_LOOPS,
.verify = intel_pstate_verify_policy,
.setpolicy = intel_pstate_set_policy,
.get = intel_pstate_get,
.init = intel_pstate_cpu_init,
+ .exit = intel_pstate_cpu_exit,
.stop_cpu = intel_pstate_stop_cpu,
.name = "intel_pstate",
};
@@ -1451,8 +1601,7 @@ static void copy_cpu_funcs(struct pstate_funcs *funcs)
}
-#if IS_ENABLED(CONFIG_ACPI)
-#include <acpi/processor.h>
+#ifdef CONFIG_ACPI
static bool intel_pstate_no_acpi_pss(void)
{
@@ -1608,7 +1757,7 @@ hwp_cpu_matched:
if (intel_pstate_platform_pwr_mgmt_exists())
return -ENODEV;
- pr_info("Intel P-state driver initializing.\n");
+ pr_info("Intel P-state driver initializing\n");
all_cpu_data = vzalloc(sizeof(void *) * num_possible_cpus());
if (!all_cpu_data)
@@ -1625,7 +1774,7 @@ hwp_cpu_matched:
intel_pstate_sysfs_expose_params();
if (hwp_active)
- pr_info("intel_pstate: HWP enabled\n");
+ pr_info("HWP enabled\n");
return rc;
out:
@@ -1651,13 +1800,19 @@ static int __init intel_pstate_setup(char *str)
if (!strcmp(str, "disable"))
no_load = 1;
if (!strcmp(str, "no_hwp")) {
- pr_info("intel_pstate: HWP disabled\n");
+ pr_info("HWP disabled\n");
no_hwp = 1;
}
if (!strcmp(str, "force"))
force_load = 1;
if (!strcmp(str, "hwp_only"))
hwp_only = 1;
+
+#ifdef CONFIG_ACPI
+ if (!strcmp(str, "support_acpi_ppc"))
+ acpi_ppc = true;
+#endif
+
return 0;
}
early_param("intel_pstate", intel_pstate_setup);
diff --git a/drivers/cpufreq/longhaul.c b/drivers/cpufreq/longhaul.c
index 0f6b229afcb9..beae5cf5c62c 100644
--- a/drivers/cpufreq/longhaul.c
+++ b/drivers/cpufreq/longhaul.c
@@ -21,6 +21,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -40,8 +42,6 @@
#include "longhaul.h"
-#define PFX "longhaul: "
-
#define TYPE_LONGHAUL_V1 1
#define TYPE_LONGHAUL_V2 2
#define TYPE_POWERSAVER 3
@@ -347,14 +347,13 @@ retry_loop:
freqs.new = calc_speed(longhaul_get_cpu_mult());
/* Check if requested frequency is set. */
if (unlikely(freqs.new != speed)) {
- printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+ pr_info("Failed to set requested frequency!\n");
/* Revision ID = 1 but processor is expecting revision key
* equal to 0. Jumpers at the bottom of processor will change
* multiplier and FSB, but will not change bits in Longhaul
* MSR nor enable voltage scaling. */
if (!revid_errata) {
- printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
- "option.\n");
+ pr_info("Enabling \"Ignore Revision ID\" option\n");
revid_errata = 1;
msleep(200);
goto retry_loop;
@@ -364,11 +363,10 @@ retry_loop:
* but it doesn't change frequency. I tried poking various
* bits in northbridge registers, but without success. */
if (longhaul_flags & USE_ACPI_C3) {
- printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+ pr_info("Disabling ACPI C3 support\n");
longhaul_flags &= ~USE_ACPI_C3;
if (revid_errata) {
- printk(KERN_INFO PFX "Disabling \"Ignore "
- "Revision ID\" option.\n");
+ pr_info("Disabling \"Ignore Revision ID\" option\n");
revid_errata = 0;
}
msleep(200);
@@ -379,7 +377,7 @@ retry_loop:
* RevID = 1. RevID errata will make things right. Just
* to be 100% sure. */
if (longhaul_version == TYPE_LONGHAUL_V2) {
- printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+ pr_info("Switching to Longhaul ver. 1\n");
longhaul_version = TYPE_LONGHAUL_V1;
msleep(200);
goto retry_loop;
@@ -387,8 +385,7 @@ retry_loop:
}
if (!bm_timeout) {
- printk(KERN_INFO PFX "Warning: Timeout while waiting for "
- "idle PCI bus.\n");
+ pr_info("Warning: Timeout while waiting for idle PCI bus\n");
return -EBUSY;
}
@@ -433,12 +430,12 @@ static int longhaul_get_ranges(void)
/* Get current frequency */
mult = longhaul_get_cpu_mult();
if (mult == -1) {
- printk(KERN_INFO PFX "Invalid (reserved) multiplier!\n");
+ pr_info("Invalid (reserved) multiplier!\n");
return -EINVAL;
}
fsb = guess_fsb(mult);
if (fsb == 0) {
- printk(KERN_INFO PFX "Invalid (reserved) FSB!\n");
+ pr_info("Invalid (reserved) FSB!\n");
return -EINVAL;
}
/* Get max multiplier - as we always did.
@@ -468,11 +465,11 @@ static int longhaul_get_ranges(void)
print_speed(highest_speed/1000));
if (lowest_speed == highest_speed) {
- printk(KERN_INFO PFX "highestspeed == lowest, aborting.\n");
+ pr_info("highestspeed == lowest, aborting\n");
return -EINVAL;
}
if (lowest_speed > highest_speed) {
- printk(KERN_INFO PFX "nonsense! lowest (%d > %d) !\n",
+ pr_info("nonsense! lowest (%d > %d) !\n",
lowest_speed, highest_speed);
return -EINVAL;
}
@@ -538,16 +535,16 @@ static void longhaul_setup_voltagescaling(void)
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
if (!(longhaul.bits.RevisionID & 1)) {
- printk(KERN_INFO PFX "Voltage scaling not supported by CPU.\n");
+ pr_info("Voltage scaling not supported by CPU\n");
return;
}
if (!longhaul.bits.VRMRev) {
- printk(KERN_INFO PFX "VRM 8.5\n");
+ pr_info("VRM 8.5\n");
vrm_mV_table = &vrm85_mV[0];
mV_vrm_table = &mV_vrm85[0];
} else {
- printk(KERN_INFO PFX "Mobile VRM\n");
+ pr_info("Mobile VRM\n");
if (cpu_model < CPU_NEHEMIAH)
return;
vrm_mV_table = &mobilevrm_mV[0];
@@ -558,27 +555,21 @@ static void longhaul_setup_voltagescaling(void)
maxvid = vrm_mV_table[longhaul.bits.MaximumVID];
if (minvid.mV == 0 || maxvid.mV == 0 || minvid.mV > maxvid.mV) {
- printk(KERN_INFO PFX "Bogus values Min:%d.%03d Max:%d.%03d. "
- "Voltage scaling disabled.\n",
- minvid.mV/1000, minvid.mV%1000,
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Bogus values Min:%d.%03d Max:%d.%03d - Voltage scaling disabled\n",
+ minvid.mV/1000, minvid.mV%1000,
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
if (minvid.mV == maxvid.mV) {
- printk(KERN_INFO PFX "Claims to support voltage scaling but "
- "min & max are both %d.%03d. "
- "Voltage scaling disabled\n",
- maxvid.mV/1000, maxvid.mV%1000);
+ pr_info("Claims to support voltage scaling but min & max are both %d.%03d - Voltage scaling disabled\n",
+ maxvid.mV/1000, maxvid.mV%1000);
return;
}
/* How many voltage steps*/
numvscales = maxvid.pos - minvid.pos + 1;
- printk(KERN_INFO PFX
- "Max VID=%d.%03d "
- "Min VID=%d.%03d, "
- "%d possible voltage scales\n",
+ pr_info("Max VID=%d.%03d Min VID=%d.%03d, %d possible voltage scales\n",
maxvid.mV/1000, maxvid.mV%1000,
minvid.mV/1000, minvid.mV%1000,
numvscales);
@@ -617,12 +608,12 @@ static void longhaul_setup_voltagescaling(void)
pos = minvid.pos;
freq_pos->driver_data |= mV_vrm_table[pos] << 8;
vid = vrm_mV_table[mV_vrm_table[pos]];
- printk(KERN_INFO PFX "f: %d kHz, index: %d, vid: %d mV\n",
+ pr_info("f: %d kHz, index: %d, vid: %d mV\n",
speed, (int)(freq_pos - longhaul_table), vid.mV);
}
can_scale_voltage = 1;
- printk(KERN_INFO PFX "Voltage scaling enabled.\n");
+ pr_info("Voltage scaling enabled\n");
}
@@ -720,8 +711,7 @@ static int enable_arbiter_disable(void)
pci_write_config_byte(dev, reg, pci_cmd);
pci_read_config_byte(dev, reg, &pci_cmd);
if (!(pci_cmd & 1<<7)) {
- printk(KERN_ERR PFX
- "Can't enable access to port 0x22.\n");
+ pr_err("Can't enable access to port 0x22\n");
status = 0;
}
}
@@ -758,8 +748,7 @@ static int longhaul_setup_southbridge(void)
if (pci_cmd & 1 << 7) {
pci_read_config_dword(dev, 0x88, &acpi_regs_addr);
acpi_regs_addr &= 0xff00;
- printk(KERN_INFO PFX "ACPI I/O at 0x%x\n",
- acpi_regs_addr);
+ pr_info("ACPI I/O at 0x%x\n", acpi_regs_addr);
}
pci_dev_put(dev);
@@ -853,14 +842,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
longhaul_version = TYPE_LONGHAUL_V1;
}
- printk(KERN_INFO PFX "VIA %s CPU detected. ", cpuname);
+ pr_info("VIA %s CPU detected. ", cpuname);
switch (longhaul_version) {
case TYPE_LONGHAUL_V1:
case TYPE_LONGHAUL_V2:
- printk(KERN_CONT "Longhaul v%d supported.\n", longhaul_version);
+ pr_cont("Longhaul v%d supported\n", longhaul_version);
break;
case TYPE_POWERSAVER:
- printk(KERN_CONT "Powersaver supported.\n");
+ pr_cont("Powersaver supported\n");
break;
};
@@ -889,15 +878,14 @@ static int longhaul_cpu_init(struct cpufreq_policy *policy)
if (!(longhaul_flags & USE_ACPI_C3
|| longhaul_flags & USE_NORTHBRIDGE)
&& ((pr == NULL) || !(pr->flags.bm_control))) {
- printk(KERN_ERR PFX
- "No ACPI support. Unsupported northbridge.\n");
+ pr_err("No ACPI support: Unsupported northbridge\n");
return -ENODEV;
}
if (longhaul_flags & USE_NORTHBRIDGE)
- printk(KERN_INFO PFX "Using northbridge support.\n");
+ pr_info("Using northbridge support\n");
if (longhaul_flags & USE_ACPI_C3)
- printk(KERN_INFO PFX "Using ACPI support.\n");
+ pr_info("Using ACPI support\n");
ret = longhaul_get_ranges();
if (ret != 0)
@@ -934,20 +922,18 @@ static int __init longhaul_init(void)
return -ENODEV;
if (!enable) {
- printk(KERN_ERR PFX "Option \"enable\" not set. Aborting.\n");
+ pr_err("Option \"enable\" not set - Aborting\n");
return -ENODEV;
}
#ifdef CONFIG_SMP
if (num_online_cpus() > 1) {
- printk(KERN_ERR PFX "More than 1 CPU detected, "
- "longhaul disabled.\n");
+ pr_err("More than 1 CPU detected, longhaul disabled\n");
return -ENODEV;
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (cpu_has_apic) {
- printk(KERN_ERR PFX "APIC detected. Longhaul is currently "
- "broken in this configuration.\n");
+ pr_err("APIC detected. Longhaul is currently broken in this configuration.\n");
return -ENODEV;
}
#endif
@@ -955,7 +941,7 @@ static int __init longhaul_init(void)
case 6 ... 9:
return cpufreq_register_driver(&longhaul_driver);
case 10:
- printk(KERN_ERR PFX "Use acpi-cpufreq driver for VIA C7\n");
+ pr_err("Use acpi-cpufreq driver for VIA C7\n");
default:
;
}
diff --git a/drivers/cpufreq/loongson2_cpufreq.c b/drivers/cpufreq/loongson2_cpufreq.c
index cd593c1f66dc..6bbdac1065ff 100644
--- a/drivers/cpufreq/loongson2_cpufreq.c
+++ b/drivers/cpufreq/loongson2_cpufreq.c
@@ -10,6 +10,9 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/cpufreq.h>
#include <linux/module.h>
#include <linux/err.h>
@@ -76,7 +79,7 @@ static int loongson2_cpufreq_cpu_init(struct cpufreq_policy *policy)
cpuclk = clk_get(NULL, "cpu_clk");
if (IS_ERR(cpuclk)) {
- printk(KERN_ERR "cpufreq: couldn't get CPU clk\n");
+ pr_err("couldn't get CPU clk\n");
return PTR_ERR(cpuclk);
}
@@ -163,7 +166,7 @@ static int __init cpufreq_init(void)
if (ret)
return ret;
- pr_info("cpufreq: Loongson-2F CPU frequency driver.\n");
+ pr_info("Loongson-2F CPU frequency driver\n");
cpufreq_register_notifier(&loongson2_cpufreq_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
diff --git a/drivers/cpufreq/maple-cpufreq.c b/drivers/cpufreq/maple-cpufreq.c
index cc3408fc073f..d9df89392b84 100644
--- a/drivers/cpufreq/maple-cpufreq.c
+++ b/drivers/cpufreq/maple-cpufreq.c
@@ -13,6 +13,8 @@
#undef DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -174,7 +176,7 @@ static int __init maple_cpufreq_init(void)
/* Get first CPU node */
cpunode = of_cpu_device_node_get(0);
if (cpunode == NULL) {
- printk(KERN_ERR "cpufreq: Can't find any CPU 0 node\n");
+ pr_err("Can't find any CPU 0 node\n");
goto bail_noprops;
}
@@ -182,8 +184,7 @@ static int __init maple_cpufreq_init(void)
/* we actually don't care on which CPU to access PVR */
pvr_hi = PVR_VER(mfspr(SPRN_PVR));
if (pvr_hi != 0x3c && pvr_hi != 0x44) {
- printk(KERN_ERR "cpufreq: Unsupported CPU version (%x)\n",
- pvr_hi);
+ pr_err("Unsupported CPU version (%x)\n", pvr_hi);
goto bail_noprops;
}
@@ -222,8 +223,8 @@ static int __init maple_cpufreq_init(void)
maple_pmode_cur = -1;
maple_scom_switch_freq(maple_scom_query_freq());
- printk(KERN_INFO "Registering Maple CPU frequency driver\n");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering Maple CPU frequency driver\n");
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
maple_cpu_freqs[1].frequency/1000,
maple_cpu_freqs[0].frequency/1000,
maple_cpu_freqs[maple_pmode_cur].frequency/1000);
diff --git a/drivers/cpufreq/mt8173-cpufreq.c b/drivers/cpufreq/mt8173-cpufreq.c
index 2058e6d292ce..6f602c7a71bd 100644
--- a/drivers/cpufreq/mt8173-cpufreq.c
+++ b/drivers/cpufreq/mt8173-cpufreq.c
@@ -59,11 +59,8 @@ static LIST_HEAD(dvfs_info_list);
static struct mtk_cpu_dvfs_info *mtk_cpu_dvfs_info_lookup(int cpu)
{
struct mtk_cpu_dvfs_info *info;
- struct list_head *list;
-
- list_for_each(list, &dvfs_info_list) {
- info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
+ list_for_each_entry(info, &dvfs_info_list, list_head) {
if (cpumask_test_cpu(cpu, &info->cpus))
return info;
}
@@ -524,8 +521,7 @@ static struct cpufreq_driver mt8173_cpufreq_driver = {
static int mt8173_cpufreq_probe(struct platform_device *pdev)
{
- struct mtk_cpu_dvfs_info *info;
- struct list_head *list, *tmp;
+ struct mtk_cpu_dvfs_info *info, *tmp;
int cpu, ret;
for_each_possible_cpu(cpu) {
@@ -559,11 +555,9 @@ static int mt8173_cpufreq_probe(struct platform_device *pdev)
return 0;
release_dvfs_info_list:
- list_for_each_safe(list, tmp, &dvfs_info_list) {
- info = list_entry(list, struct mtk_cpu_dvfs_info, list_head);
-
+ list_for_each_entry_safe(info, tmp, &dvfs_info_list, list_head) {
mtk_cpu_dvfs_info_release(info);
- list_del(list);
+ list_del(&info->list_head);
}
return ret;
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index e3866e0d5bf8..cead9bec4843 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -13,6 +13,9 @@
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
@@ -163,13 +166,13 @@ static int omap_cpufreq_probe(struct platform_device *pdev)
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
- pr_warning("%s: unable to get the mpu device\n", __func__);
+ pr_warn("%s: unable to get the MPU device\n", __func__);
return -EINVAL;
}
mpu_reg = regulator_get(mpu_dev, "vcc");
if (IS_ERR(mpu_reg)) {
- pr_warning("%s: unable to get MPU regulator\n", __func__);
+ pr_warn("%s: unable to get MPU regulator\n", __func__);
mpu_reg = NULL;
} else {
/*
diff --git a/drivers/cpufreq/p4-clockmod.c b/drivers/cpufreq/p4-clockmod.c
index 5dd95dab580d..fd77812313f3 100644
--- a/drivers/cpufreq/p4-clockmod.c
+++ b/drivers/cpufreq/p4-clockmod.c
@@ -20,6 +20,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -35,8 +37,6 @@
#include "speedstep-lib.h"
-#define PFX "p4-clockmod: "
-
/*
* Duty Cycle (3bits), note DC_DISABLE is not specified in
* intel docs i just use it to mean disable
@@ -124,11 +124,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
{
if (c->x86 == 0x06) {
if (cpu_has(c, X86_FEATURE_EST))
- printk_once(KERN_WARNING PFX "Warning: EST-capable "
- "CPU detected. The acpi-cpufreq module offers "
- "voltage scaling in addition to frequency "
- "scaling. You should use that instead of "
- "p4-clockmod, if possible.\n");
+ pr_warn_once("Warning: EST-capable CPU detected. The acpi-cpufreq module offers voltage scaling in addition to frequency scaling. You should use that instead of p4-clockmod, if possible.\n");
switch (c->x86_model) {
case 0x0E: /* Core */
case 0x0F: /* Core Duo */
@@ -152,11 +148,7 @@ static unsigned int cpufreq_p4_get_frequency(struct cpuinfo_x86 *c)
p4clockmod_driver.flags |= CPUFREQ_CONST_LOOPS;
if (speedstep_detect_processor() == SPEEDSTEP_CPU_P4M) {
- printk(KERN_WARNING PFX "Warning: Pentium 4-M detected. "
- "The speedstep-ich or acpi cpufreq modules offer "
- "voltage scaling in addition of frequency scaling. "
- "You should use either one instead of p4-clockmod, "
- "if possible.\n");
+ pr_warn("Warning: Pentium 4-M detected. The speedstep-ich or acpi cpufreq modules offer voltage scaling in addition of frequency scaling. You should use either one instead of p4-clockmod, if possible.\n");
return speedstep_get_frequency(SPEEDSTEP_CPU_P4M);
}
@@ -265,8 +257,7 @@ static int __init cpufreq_p4_init(void)
ret = cpufreq_register_driver(&p4clockmod_driver);
if (!ret)
- printk(KERN_INFO PFX "P4/Xeon(TM) CPU On-Demand Clock "
- "Modulation available\n");
+ pr_info("P4/Xeon(TM) CPU On-Demand Clock Modulation available\n");
return ret;
}
diff --git a/drivers/cpufreq/pmac32-cpufreq.c b/drivers/cpufreq/pmac32-cpufreq.c
index 1f49d97a70ea..b7b576e53e92 100644
--- a/drivers/cpufreq/pmac32-cpufreq.c
+++ b/drivers/cpufreq/pmac32-cpufreq.c
@@ -13,6 +13,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -481,13 +483,13 @@ static int pmac_cpufreq_init_MacRISC3(struct device_node *cpunode)
freqs = of_get_property(cpunode, "bus-frequencies", &lenp);
lenp /= sizeof(u32);
if (freqs == NULL || lenp != 2) {
- printk(KERN_ERR "cpufreq: bus-frequencies incorrect or missing\n");
+ pr_err("bus-frequencies incorrect or missing\n");
return 1;
}
ratio = of_get_property(cpunode, "processor-to-bus-ratio*2",
NULL);
if (ratio == NULL) {
- printk(KERN_ERR "cpufreq: processor-to-bus-ratio*2 missing\n");
+ pr_err("processor-to-bus-ratio*2 missing\n");
return 1;
}
@@ -550,7 +552,7 @@ static int pmac_cpufreq_init_7447A(struct device_node *cpunode)
if (volt_gpio_np)
voltage_gpio = read_gpio(volt_gpio_np);
if (!voltage_gpio){
- printk(KERN_ERR "cpufreq: missing cpu-vcore-select gpio\n");
+ pr_err("missing cpu-vcore-select gpio\n");
return 1;
}
@@ -675,9 +677,9 @@ out:
pmac_cpu_freqs[CPUFREQ_HIGH].frequency = hi_freq;
ppc_proc_freq = cur_freq * 1000ul;
- printk(KERN_INFO "Registering PowerMac CPU frequency driver\n");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
- low_freq/1000, hi_freq/1000, cur_freq/1000);
+ pr_info("Registering PowerMac CPU frequency driver\n");
+ pr_info("Low: %d Mhz, High: %d Mhz, Boot: %d Mhz\n",
+ low_freq/1000, hi_freq/1000, cur_freq/1000);
return cpufreq_register_driver(&pmac_cpufreq_driver);
}
diff --git a/drivers/cpufreq/pmac64-cpufreq.c b/drivers/cpufreq/pmac64-cpufreq.c
index 4ff86878727f..267e0894c62d 100644
--- a/drivers/cpufreq/pmac64-cpufreq.c
+++ b/drivers/cpufreq/pmac64-cpufreq.c
@@ -12,6 +12,8 @@
#undef DEBUG
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/module.h>
#include <linux/types.h>
#include <linux/errno.h>
@@ -138,7 +140,7 @@ static void g5_vdnap_switch_volt(int speed_mode)
usleep_range(1000, 1000);
}
if (done == 0)
- printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+ pr_warn("Timeout in clock slewing !\n");
}
@@ -266,7 +268,7 @@ static int g5_pfunc_switch_freq(int speed_mode)
rc = pmf_call_one(pfunc_cpu_setfreq_low, NULL);
if (rc)
- printk(KERN_WARNING "cpufreq: pfunc switch error %d\n", rc);
+ pr_warn("pfunc switch error %d\n", rc);
/* It's an irq GPIO so we should be able to just block here,
* I'll do that later after I've properly tested the IRQ code for
@@ -282,7 +284,7 @@ static int g5_pfunc_switch_freq(int speed_mode)
usleep_range(500, 500);
}
if (done == 0)
- printk(KERN_WARNING "cpufreq: Timeout in clock slewing !\n");
+ pr_warn("Timeout in clock slewing !\n");
/* If frequency is going down, last ramp the voltage */
if (speed_mode > g5_pmode_cur)
@@ -368,7 +370,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
}
pvr_hi = (*valp) >> 16;
if (pvr_hi != 0x3c && pvr_hi != 0x44) {
- printk(KERN_ERR "cpufreq: Unsupported CPU version\n");
+ pr_err("Unsupported CPU version\n");
goto bail_noprops;
}
@@ -403,8 +405,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
root = of_find_node_by_path("/");
if (root == NULL) {
- printk(KERN_ERR "cpufreq: Can't find root of "
- "device tree\n");
+ pr_err("Can't find root of device tree\n");
goto bail_noprops;
}
pfunc_set_vdnap0 = pmf_find_function(root, "set-vdnap0");
@@ -412,8 +413,7 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
pmf_find_function(root, "slewing-done");
if (pfunc_set_vdnap0 == NULL ||
pfunc_vdnap0_complete == NULL) {
- printk(KERN_ERR "cpufreq: Can't find required "
- "platform function\n");
+ pr_err("Can't find required platform function\n");
goto bail_noprops;
}
@@ -453,10 +453,10 @@ static int __init g5_neo2_cpufreq_init(struct device_node *cpunode)
g5_pmode_cur = -1;
g5_switch_freq(g5_query_freq());
- printk(KERN_INFO "Registering G5 CPU frequency driver\n");
- printk(KERN_INFO "Frequency method: %s, Voltage method: %s\n",
- freq_method, volt_method);
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: %s, Voltage method: %s\n",
+ freq_method, volt_method);
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
g5_cpu_freqs[1].frequency/1000,
g5_cpu_freqs[0].frequency/1000,
g5_cpu_freqs[g5_pmode_cur].frequency/1000);
@@ -493,7 +493,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
if (cpuid != NULL)
eeprom = of_get_property(cpuid, "cpuid", NULL);
if (eeprom == NULL) {
- printk(KERN_ERR "cpufreq: Can't find cpuid EEPROM !\n");
+ pr_err("Can't find cpuid EEPROM !\n");
rc = -ENODEV;
goto bail;
}
@@ -511,7 +511,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
break;
}
if (hwclock == NULL) {
- printk(KERN_ERR "cpufreq: Can't find i2c clock chip !\n");
+ pr_err("Can't find i2c clock chip !\n");
rc = -ENODEV;
goto bail;
}
@@ -539,7 +539,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
/* Check we have minimum requirements */
if (pfunc_cpu_getfreq == NULL || pfunc_cpu_setfreq_high == NULL ||
pfunc_cpu_setfreq_low == NULL || pfunc_slewing_done == NULL) {
- printk(KERN_ERR "cpufreq: Can't find platform functions !\n");
+ pr_err("Can't find platform functions !\n");
rc = -ENODEV;
goto bail;
}
@@ -567,7 +567,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
/* Get max frequency from device-tree */
valp = of_get_property(cpunode, "clock-frequency", NULL);
if (!valp) {
- printk(KERN_ERR "cpufreq: Can't find CPU frequency !\n");
+ pr_err("Can't find CPU frequency !\n");
rc = -ENODEV;
goto bail;
}
@@ -583,8 +583,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
/* Check for machines with no useful settings */
if (il == ih) {
- printk(KERN_WARNING "cpufreq: No low frequency mode available"
- " on this model !\n");
+ pr_warn("No low frequency mode available on this model !\n");
rc = -ENODEV;
goto bail;
}
@@ -595,7 +594,7 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
/* Sanity check */
if (min_freq >= max_freq || min_freq < 1000) {
- printk(KERN_ERR "cpufreq: Can't calculate low frequency !\n");
+ pr_err("Can't calculate low frequency !\n");
rc = -ENXIO;
goto bail;
}
@@ -619,10 +618,10 @@ static int __init g5_pm72_cpufreq_init(struct device_node *cpunode)
g5_pmode_cur = -1;
g5_switch_freq(g5_query_freq());
- printk(KERN_INFO "Registering G5 CPU frequency driver\n");
- printk(KERN_INFO "Frequency method: i2c/pfunc, "
- "Voltage method: %s\n", has_volt ? "i2c/pfunc" : "none");
- printk(KERN_INFO "Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
+ pr_info("Registering G5 CPU frequency driver\n");
+ pr_info("Frequency method: i2c/pfunc, Voltage method: %s\n",
+ has_volt ? "i2c/pfunc" : "none");
+ pr_info("Low: %d Mhz, High: %d Mhz, Cur: %d MHz\n",
g5_cpu_freqs[1].frequency/1000,
g5_cpu_freqs[0].frequency/1000,
g5_cpu_freqs[g5_pmode_cur].frequency/1000);
@@ -654,7 +653,7 @@ static int __init g5_cpufreq_init(void)
/* Get first CPU node */
cpunode = of_cpu_device_node_get(0);
if (cpunode == NULL) {
- pr_err("cpufreq: Can't find any CPU node\n");
+ pr_err("Can't find any CPU node\n");
return -ENODEV;
}
diff --git a/drivers/cpufreq/powernow-k6.c b/drivers/cpufreq/powernow-k6.c
index e6f24b281e3e..dedd2568e852 100644
--- a/drivers/cpufreq/powernow-k6.c
+++ b/drivers/cpufreq/powernow-k6.c
@@ -8,6 +8,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -22,7 +24,6 @@
#define POWERNOW_IOPORT 0xfff0 /* it doesn't matter where, as long
as it is unused */
-#define PFX "powernow-k6: "
static unsigned int busfreq; /* FSB, in 10 kHz */
static unsigned int max_multiplier;
@@ -141,7 +142,7 @@ static int powernow_k6_target(struct cpufreq_policy *policy,
{
if (clock_ratio[best_i].driver_data > max_multiplier) {
- printk(KERN_ERR PFX "invalid target frequency\n");
+ pr_err("invalid target frequency\n");
return -EINVAL;
}
@@ -175,13 +176,14 @@ static int powernow_k6_cpu_init(struct cpufreq_policy *policy)
max_multiplier = param_max_multiplier;
goto have_max_multiplier;
}
- printk(KERN_ERR "powernow-k6: invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
+ pr_err("invalid max_multiplier parameter, valid parameters 20, 30, 35, 40, 45, 50, 55, 60\n");
return -EINVAL;
}
if (!max_multiplier) {
- printk(KERN_WARNING "powernow-k6: unknown frequency %u, cannot determine current multiplier\n", khz);
- printk(KERN_WARNING "powernow-k6: use module parameters max_multiplier and bus_frequency\n");
+ pr_warn("unknown frequency %u, cannot determine current multiplier\n",
+ khz);
+ pr_warn("use module parameters max_multiplier and bus_frequency\n");
return -EOPNOTSUPP;
}
@@ -193,7 +195,7 @@ have_max_multiplier:
busfreq = param_busfreq / 10;
goto have_busfreq;
}
- printk(KERN_ERR "powernow-k6: invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
+ pr_err("invalid bus_frequency parameter, allowed range 50000 - 150000 kHz\n");
return -EINVAL;
}
@@ -275,7 +277,7 @@ static int __init powernow_k6_init(void)
return -ENODEV;
if (!request_region(POWERNOW_IOPORT, 16, "PowerNow!")) {
- printk(KERN_INFO PFX "PowerNow IOPORT region already used.\n");
+ pr_info("PowerNow IOPORT region already used\n");
return -EIO;
}
diff --git a/drivers/cpufreq/powernow-k7.c b/drivers/cpufreq/powernow-k7.c
index c1ae1999770a..9f013ed42977 100644
--- a/drivers/cpufreq/powernow-k7.c
+++ b/drivers/cpufreq/powernow-k7.c
@@ -13,6 +13,8 @@
* - We disable half multipliers if ACPI is used on A0 stepping CPUs.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -35,9 +37,6 @@
#include "powernow-k7.h"
-#define PFX "powernow: "
-
-
struct psb_s {
u8 signature[10];
u8 tableversion;
@@ -127,14 +126,13 @@ static int check_powernow(void)
maxei = cpuid_eax(0x80000000);
if (maxei < 0x80000007) { /* Any powernow info ? */
#ifdef MODULE
- printk(KERN_INFO PFX "No powernow capabilities detected\n");
+ pr_info("No powernow capabilities detected\n");
#endif
return 0;
}
if ((c->x86_model == 6) && (c->x86_mask == 0)) {
- printk(KERN_INFO PFX "K7 660[A0] core detected, "
- "enabling errata workarounds\n");
+ pr_info("K7 660[A0] core detected, enabling errata workarounds\n");
have_a0 = 1;
}
@@ -144,22 +142,22 @@ static int check_powernow(void)
if (!(edx & (1 << 1 | 1 << 2)))
return 0;
- printk(KERN_INFO PFX "PowerNOW! Technology present. Can scale: ");
+ pr_info("PowerNOW! Technology present. Can scale: ");
if (edx & 1 << 1) {
- printk("frequency");
+ pr_cont("frequency");
can_scale_bus = 1;
}
if ((edx & (1 << 1 | 1 << 2)) == 0x6)
- printk(" and ");
+ pr_cont(" and ");
if (edx & 1 << 2) {
- printk("voltage");
+ pr_cont("voltage");
can_scale_vid = 1;
}
- printk(".\n");
+ pr_cont("\n");
return 1;
}
@@ -427,16 +425,14 @@ err1:
err05:
kfree(acpi_processor_perf);
err0:
- printk(KERN_WARNING PFX "ACPI perflib can not be used on "
- "this platform\n");
+ pr_warn("ACPI perflib can not be used on this platform\n");
acpi_processor_perf = NULL;
return retval;
}
#else
static int powernow_acpi_init(void)
{
- printk(KERN_INFO PFX "no support for ACPI processor found."
- " Please recompile your kernel with ACPI processor\n");
+ pr_info("no support for ACPI processor found - please recompile your kernel with ACPI processor\n");
return -EINVAL;
}
#endif
@@ -468,8 +464,7 @@ static int powernow_decode_bios(int maxfid, int startvid)
psb = (struct psb_s *) p;
pr_debug("Table version: 0x%x\n", psb->tableversion);
if (psb->tableversion != 0x12) {
- printk(KERN_INFO PFX "Sorry, only v1.2 tables"
- " supported right now\n");
+ pr_info("Sorry, only v1.2 tables supported right now\n");
return -ENODEV;
}
@@ -481,10 +476,8 @@ static int powernow_decode_bios(int maxfid, int startvid)
latency = psb->settlingtime;
if (latency < 100) {
- printk(KERN_INFO PFX "BIOS set settling time "
- "to %d microseconds. "
- "Should be at least 100. "
- "Correcting.\n", latency);
+ pr_info("BIOS set settling time to %d microseconds. Should be at least 100. Correcting.\n",
+ latency);
latency = 100;
}
pr_debug("Settling Time: %d microseconds.\n",
@@ -516,10 +509,9 @@ static int powernow_decode_bios(int maxfid, int startvid)
p += 2;
}
}
- printk(KERN_INFO PFX "No PST tables match this cpuid "
- "(0x%x)\n", etuple);
- printk(KERN_INFO PFX "This is indicative of a broken "
- "BIOS.\n");
+ pr_info("No PST tables match this cpuid (0x%x)\n",
+ etuple);
+ pr_info("This is indicative of a broken BIOS\n");
return -EINVAL;
}
@@ -552,7 +544,7 @@ static int fixup_sgtc(void)
sgtc = 100 * m * latency;
sgtc = sgtc / 3;
if (sgtc > 0xfffff) {
- printk(KERN_WARNING PFX "SGTC too large %d\n", sgtc);
+ pr_warn("SGTC too large %d\n", sgtc);
sgtc = 0xfffff;
}
return sgtc;
@@ -574,14 +566,10 @@ static unsigned int powernow_get(unsigned int cpu)
static int acer_cpufreq_pst(const struct dmi_system_id *d)
{
- printk(KERN_WARNING PFX
- "%s laptop with broken PST tables in BIOS detected.\n",
+ pr_warn("%s laptop with broken PST tables in BIOS detected\n",
d->ident);
- printk(KERN_WARNING PFX
- "You need to downgrade to 3A21 (09/09/2002), or try a newer "
- "BIOS than 3A71 (01/20/2003)\n");
- printk(KERN_WARNING PFX
- "cpufreq scaling has been disabled as a result of this.\n");
+ pr_warn("You need to downgrade to 3A21 (09/09/2002), or try a newer BIOS than 3A71 (01/20/2003)\n");
+ pr_warn("cpufreq scaling has been disabled as a result of this\n");
return 0;
}
@@ -616,40 +604,38 @@ static int powernow_cpu_init(struct cpufreq_policy *policy)
fsb = (10 * cpu_khz) / fid_codes[fidvidstatus.bits.CFID];
if (!fsb) {
- printk(KERN_WARNING PFX "can not determine bus frequency\n");
+ pr_warn("can not determine bus frequency\n");
return -EINVAL;
}
pr_debug("FSB: %3dMHz\n", fsb/1000);
if (dmi_check_system(powernow_dmi_table) || acpi_force) {
- printk(KERN_INFO PFX "PSB/PST known to be broken. "
- "Trying ACPI instead\n");
+ pr_info("PSB/PST known to be broken - trying ACPI instead\n");
result = powernow_acpi_init();
} else {
result = powernow_decode_bios(fidvidstatus.bits.MFID,
fidvidstatus.bits.SVID);
if (result) {
- printk(KERN_INFO PFX "Trying ACPI perflib\n");
+ pr_info("Trying ACPI perflib\n");
maximum_speed = 0;
minimum_speed = -1;
latency = 0;
result = powernow_acpi_init();
if (result) {
- printk(KERN_INFO PFX
- "ACPI and legacy methods failed\n");
+ pr_info("ACPI and legacy methods failed\n");
}
} else {
/* SGTC use the bus clock as timer */
latency = fixup_sgtc();
- printk(KERN_INFO PFX "SGTC: %d\n", latency);
+ pr_info("SGTC: %d\n", latency);
}
}
if (result)
return result;
- printk(KERN_INFO PFX "Minimum speed %d MHz. Maximum speed %d MHz.\n",
- minimum_speed/1000, maximum_speed/1000);
+ pr_info("Minimum speed %d MHz - Maximum speed %d MHz\n",
+ minimum_speed/1000, maximum_speed/1000);
policy->cpuinfo.transition_latency =
cpufreq_scale(2000000UL, fsb, latency);
diff --git a/drivers/cpufreq/powernv-cpufreq.c b/drivers/cpufreq/powernv-cpufreq.c
index 39ac78c94be0..144c73211926 100644
--- a/drivers/cpufreq/powernv-cpufreq.c
+++ b/drivers/cpufreq/powernv-cpufreq.c
@@ -36,12 +36,56 @@
#include <asm/reg.h>
#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
#include <asm/opal.h>
+#include <linux/timer.h>
#define POWERNV_MAX_PSTATES 256
#define PMSR_PSAFE_ENABLE (1UL << 30)
#define PMSR_SPR_EM_DISABLE (1UL << 31)
#define PMSR_MAX(x) ((x >> 32) & 0xFF)
+#define MAX_RAMP_DOWN_TIME 5120
+/*
+ * On an idle system we want the global pstate to ramp-down from max value to
+ * min over a span of ~5 secs. Also we want it to initially ramp-down slowly and
+ * then ramp-down rapidly later on.
+ *
+ * This gives a percentage rampdown for time elapsed in milliseconds.
+ * ramp_down_percentage = ((ms * ms) >> 18)
+ * ~= 3.8 * (sec * sec)
+ *
+ * At 0 ms ramp_down_percent = 0
+ * At 5120 ms ramp_down_percent = 100
+ */
+#define ramp_down_percent(time) ((time * time) >> 18)
+
+/* Interval after which the timer is queued to bring down global pstate */
+#define GPSTATE_TIMER_INTERVAL 2000
+
+/**
+ * struct global_pstate_info - Per policy data structure to maintain history of
+ * global pstates
+ * @highest_lpstate: The local pstate from which we are ramping down
+ * @elapsed_time: Time in ms spent in ramping down from
+ * highest_lpstate
+ * @last_sampled_time: Time from boot in ms when global pstates were
+ * last set
+ * @last_lpstate,last_gpstate: Last set values for local and global pstates
+ * @timer: Is used for ramping down if cpu goes idle for
+ * a long time with global pstate held high
+ * @gpstate_lock: A spinlock to maintain synchronization between
+ * routines called by the timer handler and
+ * governer's target_index calls
+ */
+struct global_pstate_info {
+ int highest_lpstate;
+ unsigned int elapsed_time;
+ unsigned int last_sampled_time;
+ int last_lpstate;
+ int last_gpstate;
+ spinlock_t gpstate_lock;
+ struct timer_list timer;
+};
+
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
static bool rebooting, throttled, occ_reset;
@@ -94,6 +138,17 @@ static struct powernv_pstate_info {
int nr_pstates;
} powernv_pstate_info;
+static inline void reset_gpstates(struct cpufreq_policy *policy)
+{
+ struct global_pstate_info *gpstates = policy->driver_data;
+
+ gpstates->highest_lpstate = 0;
+ gpstates->elapsed_time = 0;
+ gpstates->last_sampled_time = 0;
+ gpstates->last_lpstate = 0;
+ gpstates->last_gpstate = 0;
+}
+
/*
* Initialize the freq table based on data obtained
* from the firmware passed via device-tree
@@ -285,6 +340,7 @@ static inline void set_pmspr(unsigned long sprn, unsigned long val)
struct powernv_smp_call_data {
unsigned int freq;
int pstate_id;
+ int gpstate_id;
};
/*
@@ -343,19 +399,21 @@ static unsigned int powernv_cpufreq_get(unsigned int cpu)
* (struct powernv_smp_call_data *) and the pstate_id which needs to be set
* on this CPU should be present in freq_data->pstate_id.
*/
-static void set_pstate(void *freq_data)
+static void set_pstate(void *data)
{
unsigned long val;
- unsigned long pstate_ul =
- ((struct powernv_smp_call_data *) freq_data)->pstate_id;
+ struct powernv_smp_call_data *freq_data = data;
+ unsigned long pstate_ul = freq_data->pstate_id;
+ unsigned long gpstate_ul = freq_data->gpstate_id;
val = get_pmspr(SPRN_PMCR);
val = val & 0x0000FFFFFFFFFFFFULL;
pstate_ul = pstate_ul & 0xFF;
+ gpstate_ul = gpstate_ul & 0xFF;
/* Set both global(bits 56..63) and local(bits 48..55) PStates */
- val = val | (pstate_ul << 56) | (pstate_ul << 48);
+ val = val | (gpstate_ul << 56) | (pstate_ul << 48);
pr_debug("Setting cpu %d pmcr to %016lX\n",
raw_smp_processor_id(), val);
@@ -424,6 +482,110 @@ next:
}
}
+/**
+ * calc_global_pstate - Calculate global pstate
+ * @elapsed_time: Elapsed time in milliseconds
+ * @local_pstate: New local pstate
+ * @highest_lpstate: pstate from which its ramping down
+ *
+ * Finds the appropriate global pstate based on the pstate from which its
+ * ramping down and the time elapsed in ramping down. It follows a quadratic
+ * equation which ensures that it reaches ramping down to pmin in 5sec.
+ */
+static inline int calc_global_pstate(unsigned int elapsed_time,
+ int highest_lpstate, int local_pstate)
+{
+ int pstate_diff;
+
+ /*
+ * Using ramp_down_percent we get the percentage of rampdown
+ * that we are expecting to be dropping. Difference between
+ * highest_lpstate and powernv_pstate_info.min will give a absolute
+ * number of how many pstates we will drop eventually by the end of
+ * 5 seconds, then just scale it get the number pstates to be dropped.
+ */
+ pstate_diff = ((int)ramp_down_percent(elapsed_time) *
+ (highest_lpstate - powernv_pstate_info.min)) / 100;
+
+ /* Ensure that global pstate is >= to local pstate */
+ if (highest_lpstate - pstate_diff < local_pstate)
+ return local_pstate;
+ else
+ return highest_lpstate - pstate_diff;
+}
+
+static inline void queue_gpstate_timer(struct global_pstate_info *gpstates)
+{
+ unsigned int timer_interval;
+
+ /*
+ * Setting up timer to fire after GPSTATE_TIMER_INTERVAL ms, But
+ * if it exceeds MAX_RAMP_DOWN_TIME ms for ramp down time.
+ * Set timer such that it fires exactly at MAX_RAMP_DOWN_TIME
+ * seconds of ramp down time.
+ */
+ if ((gpstates->elapsed_time + GPSTATE_TIMER_INTERVAL)
+ > MAX_RAMP_DOWN_TIME)
+ timer_interval = MAX_RAMP_DOWN_TIME - gpstates->elapsed_time;
+ else
+ timer_interval = GPSTATE_TIMER_INTERVAL;
+
+ mod_timer_pinned(&gpstates->timer, jiffies +
+ msecs_to_jiffies(timer_interval));
+}
+
+/**
+ * gpstate_timer_handler
+ *
+ * @data: pointer to cpufreq_policy on which timer was queued
+ *
+ * This handler brings down the global pstate closer to the local pstate
+ * according quadratic equation. Queues a new timer if it is still not equal
+ * to local pstate
+ */
+void gpstate_timer_handler(unsigned long data)
+{
+ struct cpufreq_policy *policy = (struct cpufreq_policy *)data;
+ struct global_pstate_info *gpstates = policy->driver_data;
+ int gpstate_id;
+ unsigned int time_diff = jiffies_to_msecs(jiffies)
+ - gpstates->last_sampled_time;
+ struct powernv_smp_call_data freq_data;
+
+ if (!spin_trylock(&gpstates->gpstate_lock))
+ return;
+
+ gpstates->last_sampled_time += time_diff;
+ gpstates->elapsed_time += time_diff;
+ freq_data.pstate_id = gpstates->last_lpstate;
+
+ if ((gpstates->last_gpstate == freq_data.pstate_id) ||
+ (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME)) {
+ gpstate_id = freq_data.pstate_id;
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ } else {
+ gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+ gpstates->highest_lpstate,
+ freq_data.pstate_id);
+ }
+
+ /*
+ * If local pstate is equal to global pstate, rampdown is over
+ * So timer is not required to be queued.
+ */
+ if (gpstate_id != freq_data.pstate_id)
+ queue_gpstate_timer(gpstates);
+
+ freq_data.gpstate_id = gpstate_id;
+ gpstates->last_gpstate = freq_data.gpstate_id;
+ gpstates->last_lpstate = freq_data.pstate_id;
+
+ /* Timer may get migrated to a different cpu on cpu hot unplug */
+ smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
+ spin_unlock(&gpstates->gpstate_lock);
+}
+
/*
* powernv_cpufreq_target_index: Sets the frequency corresponding to
* the cpufreq table entry indexed by new_index on the cpus in the
@@ -433,6 +595,9 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
unsigned int new_index)
{
struct powernv_smp_call_data freq_data;
+ unsigned int cur_msec, gpstate_id;
+ unsigned long flags;
+ struct global_pstate_info *gpstates = policy->driver_data;
if (unlikely(rebooting) && new_index != get_nominal_index())
return 0;
@@ -440,28 +605,78 @@ static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
if (!throttled)
powernv_cpufreq_throttle_check(NULL);
+ cur_msec = jiffies_to_msecs(get_jiffies_64());
+
+ spin_lock_irqsave(&gpstates->gpstate_lock, flags);
freq_data.pstate_id = powernv_freqs[new_index].driver_data;
+ if (!gpstates->last_sampled_time) {
+ gpstate_id = freq_data.pstate_id;
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ goto gpstates_done;
+ }
+
+ if (gpstates->last_gpstate > freq_data.pstate_id) {
+ gpstates->elapsed_time += cur_msec -
+ gpstates->last_sampled_time;
+
+ /*
+ * If its has been ramping down for more than MAX_RAMP_DOWN_TIME
+ * we should be resetting all global pstate related data. Set it
+ * equal to local pstate to start fresh.
+ */
+ if (gpstates->elapsed_time > MAX_RAMP_DOWN_TIME) {
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ gpstate_id = freq_data.pstate_id;
+ } else {
+ /* Elaspsed_time is less than 5 seconds, continue to rampdown */
+ gpstate_id = calc_global_pstate(gpstates->elapsed_time,
+ gpstates->highest_lpstate,
+ freq_data.pstate_id);
+ }
+ } else {
+ reset_gpstates(policy);
+ gpstates->highest_lpstate = freq_data.pstate_id;
+ gpstate_id = freq_data.pstate_id;
+ }
+
+ /*
+ * If local pstate is equal to global pstate, rampdown is over
+ * So timer is not required to be queued.
+ */
+ if (gpstate_id != freq_data.pstate_id)
+ queue_gpstate_timer(gpstates);
+
+gpstates_done:
+ freq_data.gpstate_id = gpstate_id;
+ gpstates->last_sampled_time = cur_msec;
+ gpstates->last_gpstate = freq_data.gpstate_id;
+ gpstates->last_lpstate = freq_data.pstate_id;
+
/*
* Use smp_call_function to send IPI and execute the
* mtspr on target CPU. We could do that without IPI
* if current CPU is within policy->cpus (core)
*/
smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
-
+ spin_unlock_irqrestore(&gpstates->gpstate_lock, flags);
return 0;
}
static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
{
- int base, i;
+ int base, i, ret;
+ struct kernfs_node *kn;
+ struct global_pstate_info *gpstates;
base = cpu_first_thread_sibling(policy->cpu);
for (i = 0; i < threads_per_core; i++)
cpumask_set_cpu(base + i, policy->cpus);
- if (!policy->driver_data) {
+ kn = kernfs_find_and_get(policy->kobj.sd, throttle_attr_grp.name);
+ if (!kn) {
int ret;
ret = sysfs_create_group(&policy->kobj, &throttle_attr_grp);
@@ -470,13 +685,37 @@ static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
policy->cpu);
return ret;
}
- /*
- * policy->driver_data is used as a flag for one-time
- * creation of throttle sysfs files.
- */
- policy->driver_data = policy;
+ } else {
+ kernfs_put(kn);
}
- return cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+ gpstates = kzalloc(sizeof(*gpstates), GFP_KERNEL);
+ if (!gpstates)
+ return -ENOMEM;
+
+ policy->driver_data = gpstates;
+
+ /* initialize timer */
+ init_timer_deferrable(&gpstates->timer);
+ gpstates->timer.data = (unsigned long)policy;
+ gpstates->timer.function = gpstate_timer_handler;
+ gpstates->timer.expires = jiffies +
+ msecs_to_jiffies(GPSTATE_TIMER_INTERVAL);
+ spin_lock_init(&gpstates->gpstate_lock);
+ ret = cpufreq_table_validate_and_show(policy, powernv_freqs);
+
+ if (ret < 0)
+ kfree(policy->driver_data);
+
+ return ret;
+}
+
+static int powernv_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+ /* timer is deleted in cpufreq_cpu_stop() */
+ kfree(policy->driver_data);
+
+ return 0;
}
static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
@@ -604,15 +843,19 @@ static struct notifier_block powernv_cpufreq_opal_nb = {
static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
{
struct powernv_smp_call_data freq_data;
+ struct global_pstate_info *gpstates = policy->driver_data;
freq_data.pstate_id = powernv_pstate_info.min;
+ freq_data.gpstate_id = powernv_pstate_info.min;
smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
+ del_timer_sync(&gpstates->timer);
}
static struct cpufreq_driver powernv_cpufreq_driver = {
.name = "powernv-cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
.init = powernv_cpufreq_cpu_init,
+ .exit = powernv_cpufreq_cpu_exit,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = powernv_cpufreq_target_index,
.get = powernv_cpufreq_get,
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq.h b/drivers/cpufreq/ppc_cbe_cpufreq.h
index b4c00a5a6a59..3eace725ccd6 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq.h
+++ b/drivers/cpufreq/ppc_cbe_cpufreq.h
@@ -17,7 +17,7 @@ int cbe_cpufreq_get_pmode(int cpu);
int cbe_cpufreq_set_pmode_pmi(int cpu, unsigned int pmode);
-#if defined(CONFIG_CPU_FREQ_CBE_PMI) || defined(CONFIG_CPU_FREQ_CBE_PMI_MODULE)
+#if IS_ENABLED(CONFIG_CPU_FREQ_CBE_PMI)
extern bool cbe_cpufreq_has_pmi;
#else
#define cbe_cpufreq_has_pmi (0)
diff --git a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
index 7969f7690498..7c4cd5c634f2 100644
--- a/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
+++ b/drivers/cpufreq/ppc_cbe_cpufreq_pmi.c
@@ -23,7 +23,7 @@
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/timer.h>
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/of_platform.h>
#include <asm/processor.h>
@@ -142,15 +142,4 @@ static int __init cbe_cpufreq_pmi_init(void)
return 0;
}
-
-static void __exit cbe_cpufreq_pmi_exit(void)
-{
- cpufreq_unregister_notifier(&pmi_notifier_block, CPUFREQ_POLICY_NOTIFIER);
- pmi_unregister_handler(&cbe_pmi_handler);
-}
-
-module_init(cbe_cpufreq_pmi_init);
-module_exit(cbe_cpufreq_pmi_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Christian Krafft <krafft@de.ibm.com>");
+device_initcall(cbe_cpufreq_pmi_init);
diff --git a/drivers/cpufreq/pxa2xx-cpufreq.c b/drivers/cpufreq/pxa2xx-cpufreq.c
index 46fee1539cc8..ce345bf34d5d 100644
--- a/drivers/cpufreq/pxa2xx-cpufreq.c
+++ b/drivers/cpufreq/pxa2xx-cpufreq.c
@@ -29,6 +29,8 @@
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/sched.h>
@@ -186,8 +188,7 @@ static int pxa_cpufreq_change_voltage(const struct pxa_freqs *pxa_freq)
ret = regulator_set_voltage(vcc_core, vmin, vmax);
if (ret)
- pr_err("cpufreq: Failed to set vcc_core in [%dmV..%dmV]\n",
- vmin, vmax);
+ pr_err("Failed to set vcc_core in [%dmV..%dmV]\n", vmin, vmax);
return ret;
}
@@ -195,10 +196,10 @@ static void __init pxa_cpufreq_init_voltages(void)
{
vcc_core = regulator_get(NULL, "vcc_core");
if (IS_ERR(vcc_core)) {
- pr_info("cpufreq: Didn't find vcc_core regulator\n");
+ pr_info("Didn't find vcc_core regulator\n");
vcc_core = NULL;
} else {
- pr_info("cpufreq: Found vcc_core regulator\n");
+ pr_info("Found vcc_core regulator\n");
}
}
#else
@@ -233,9 +234,8 @@ static void pxa27x_guess_max_freq(void)
{
if (!pxa27x_maxfreq) {
pxa27x_maxfreq = 416000;
- printk(KERN_INFO "PXA CPU 27x max frequency not defined "
- "(pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
- pxa27x_maxfreq);
+ pr_info("PXA CPU 27x max frequency not defined (pxa27x_maxfreq), assuming pxa271 with %dkHz maxfreq\n",
+ pxa27x_maxfreq);
} else {
pxa27x_maxfreq *= 1000;
}
@@ -408,7 +408,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
*/
if (cpu_is_pxa25x()) {
find_freq_tables(&pxa255_freq_table, &pxa255_freqs);
- pr_info("PXA255 cpufreq using %s frequency table\n",
+ pr_info("using %s frequency table\n",
pxa255_turbo_table ? "turbo" : "run");
cpufreq_table_validate_and_show(policy, pxa255_freq_table);
@@ -417,7 +417,7 @@ static int pxa_cpufreq_init(struct cpufreq_policy *policy)
cpufreq_table_validate_and_show(policy, pxa27x_freq_table);
}
- printk(KERN_INFO "PXA CPU frequency change support initialized\n");
+ pr_info("frequency change support initialized\n");
return 0;
}
diff --git a/drivers/cpufreq/qoriq-cpufreq.c b/drivers/cpufreq/qoriq-cpufreq.c
index b23e525a7af3..53d8c3fb16f6 100644
--- a/drivers/cpufreq/qoriq-cpufreq.c
+++ b/drivers/cpufreq/qoriq-cpufreq.c
@@ -301,10 +301,11 @@ err_np:
return -ENODEV;
}
-static int __exit qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+static int qoriq_cpufreq_cpu_exit(struct cpufreq_policy *policy)
{
struct cpu_data *data = policy->driver_data;
+ cpufreq_cooling_unregister(data->cdev);
kfree(data->pclk);
kfree(data->table);
kfree(data);
@@ -333,8 +334,8 @@ static void qoriq_cpufreq_ready(struct cpufreq_policy *policy)
cpud->cdev = of_cpufreq_cooling_register(np,
policy->related_cpus);
- if (IS_ERR(cpud->cdev)) {
- pr_err("Failed to register cooling device cpu%d: %ld\n",
+ if (IS_ERR(cpud->cdev) && PTR_ERR(cpud->cdev) != -ENOSYS) {
+ pr_err("cpu%d is not running as cooling device: %ld\n",
policy->cpu, PTR_ERR(cpud->cdev));
cpud->cdev = NULL;
@@ -348,7 +349,7 @@ static struct cpufreq_driver qoriq_cpufreq_driver = {
.name = "qoriq_cpufreq",
.flags = CPUFREQ_CONST_LOOPS,
.init = qoriq_cpufreq_cpu_init,
- .exit = __exit_p(qoriq_cpufreq_cpu_exit),
+ .exit = qoriq_cpufreq_cpu_exit,
.verify = cpufreq_generic_frequency_table_verify,
.target_index = qoriq_cpufreq_target,
.get = cpufreq_generic_get,
diff --git a/drivers/cpufreq/s3c2412-cpufreq.c b/drivers/cpufreq/s3c2412-cpufreq.c
index eb262133fef2..b04b6f02bbdc 100644
--- a/drivers/cpufreq/s3c2412-cpufreq.c
+++ b/drivers/cpufreq/s3c2412-cpufreq.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -197,21 +199,20 @@ static int s3c2412_cpufreq_add(struct device *dev,
hclk = clk_get(NULL, "hclk");
if (IS_ERR(hclk)) {
- printk(KERN_ERR "%s: cannot find hclk clock\n", __func__);
+ pr_err("cannot find hclk clock\n");
return -ENOENT;
}
fclk = clk_get(NULL, "fclk");
if (IS_ERR(fclk)) {
- printk(KERN_ERR "%s: cannot find fclk clock\n", __func__);
+ pr_err("cannot find fclk clock\n");
goto err_fclk;
}
fclk_rate = clk_get_rate(fclk);
if (fclk_rate > 200000000) {
- printk(KERN_INFO
- "%s: fclk %ld MHz, assuming 266MHz capable part\n",
- __func__, fclk_rate / 1000000);
+ pr_info("fclk %ld MHz, assuming 266MHz capable part\n",
+ fclk_rate / 1000000);
s3c2412_cpufreq_info.max.fclk = 266000000;
s3c2412_cpufreq_info.max.hclk = 133000000;
s3c2412_cpufreq_info.max.pclk = 66000000;
@@ -219,13 +220,13 @@ static int s3c2412_cpufreq_add(struct device *dev,
armclk = clk_get(NULL, "armclk");
if (IS_ERR(armclk)) {
- printk(KERN_ERR "%s: cannot find arm clock\n", __func__);
+ pr_err("cannot find arm clock\n");
goto err_armclk;
}
xtal = clk_get(NULL, "xtal");
if (IS_ERR(xtal)) {
- printk(KERN_ERR "%s: cannot find xtal clock\n", __func__);
+ pr_err("cannot find xtal clock\n");
goto err_xtal;
}
diff --git a/drivers/cpufreq/s3c2440-cpufreq.c b/drivers/cpufreq/s3c2440-cpufreq.c
index 0129f5c70a61..d0d75b65ddd6 100644
--- a/drivers/cpufreq/s3c2440-cpufreq.c
+++ b/drivers/cpufreq/s3c2440-cpufreq.c
@@ -11,6 +11,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -66,7 +68,7 @@ static int s3c2440_cpufreq_calcdivs(struct s3c_cpufreq_config *cfg)
__func__, fclk, armclk, hclk_max);
if (armclk > fclk) {
- printk(KERN_WARNING "%s: armclk > fclk\n", __func__);
+ pr_warn("%s: armclk > fclk\n", __func__);
armclk = fclk;
}
@@ -273,7 +275,7 @@ static int s3c2440_cpufreq_add(struct device *dev,
armclk = s3c_cpufreq_clk_get(NULL, "armclk");
if (IS_ERR(xtal) || IS_ERR(hclk) || IS_ERR(fclk) || IS_ERR(armclk)) {
- printk(KERN_ERR "%s: failed to get clocks\n", __func__);
+ pr_err("%s: failed to get clocks\n", __func__);
return -ENOENT;
}
diff --git a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
index 9b7b4289d66c..4d976e8dbb2f 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq-debugfs.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/export.h>
#include <linux/interrupt.h>
@@ -178,7 +180,7 @@ static int __init s3c_freq_debugfs_init(void)
{
dbgfs_root = debugfs_create_dir("s3c-cpufreq", NULL);
if (IS_ERR(dbgfs_root)) {
- printk(KERN_ERR "%s: error creating debugfs root\n", __func__);
+ pr_err("%s: error creating debugfs root\n", __func__);
return PTR_ERR(dbgfs_root);
}
diff --git a/drivers/cpufreq/s3c24xx-cpufreq.c b/drivers/cpufreq/s3c24xx-cpufreq.c
index 68ef8fd9482f..ae8eaed77b70 100644
--- a/drivers/cpufreq/s3c24xx-cpufreq.c
+++ b/drivers/cpufreq/s3c24xx-cpufreq.c
@@ -10,6 +10,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
@@ -175,7 +177,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
cpu_new.freq.fclk = cpu_new.pll.frequency;
if (s3c_cpufreq_calcdivs(&cpu_new) < 0) {
- printk(KERN_ERR "no divisors for %d\n", target_freq);
+ pr_err("no divisors for %d\n", target_freq);
goto err_notpossible;
}
@@ -187,7 +189,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
if (cpu_new.freq.hclk != cpu_cur.freq.hclk) {
if (s3c_cpufreq_calcio(&cpu_new) < 0) {
- printk(KERN_ERR "%s: no IO timings\n", __func__);
+ pr_err("%s: no IO timings\n", __func__);
goto err_notpossible;
}
}
@@ -262,7 +264,7 @@ static int s3c_cpufreq_settarget(struct cpufreq_policy *policy,
return 0;
err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ pr_err("no compatible settings for %d\n", target_freq);
return -EINVAL;
}
@@ -331,7 +333,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy,
&index);
if (ret < 0) {
- printk(KERN_ERR "%s: no PLL available\n", __func__);
+ pr_err("%s: no PLL available\n", __func__);
goto err_notpossible;
}
@@ -346,7 +348,7 @@ static int s3c_cpufreq_target(struct cpufreq_policy *policy,
return s3c_cpufreq_settarget(policy, target_freq, pll);
err_notpossible:
- printk(KERN_ERR "no compatible settings for %d\n", target_freq);
+ pr_err("no compatible settings for %d\n", target_freq);
return -EINVAL;
}
@@ -356,7 +358,7 @@ struct clk *s3c_cpufreq_clk_get(struct device *dev, const char *name)
clk = clk_get(dev, name);
if (IS_ERR(clk))
- printk(KERN_ERR "cpufreq: failed to get clock '%s'\n", name);
+ pr_err("failed to get clock '%s'\n", name);
return clk;
}
@@ -378,15 +380,16 @@ static int __init s3c_cpufreq_initclks(void)
if (IS_ERR(clk_fclk) || IS_ERR(clk_hclk) || IS_ERR(clk_pclk) ||
IS_ERR(_clk_mpll) || IS_ERR(clk_arm) || IS_ERR(_clk_xtal)) {
- printk(KERN_ERR "%s: could not get clock(s)\n", __func__);
+ pr_err("%s: could not get clock(s)\n", __func__);
return -ENOENT;
}
- printk(KERN_INFO "%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n", __func__,
- clk_get_rate(clk_fclk) / 1000,
- clk_get_rate(clk_hclk) / 1000,
- clk_get_rate(clk_pclk) / 1000,
- clk_get_rate(clk_arm) / 1000);
+ pr_info("%s: clocks f=%lu,h=%lu,p=%lu,a=%lu\n",
+ __func__,
+ clk_get_rate(clk_fclk) / 1000,
+ clk_get_rate(clk_hclk) / 1000,
+ clk_get_rate(clk_pclk) / 1000,
+ clk_get_rate(clk_arm) / 1000);
return 0;
}
@@ -424,7 +427,7 @@ static int s3c_cpufreq_resume(struct cpufreq_policy *policy)
ret = s3c_cpufreq_settarget(NULL, suspend_freq, &suspend_pll);
if (ret) {
- printk(KERN_ERR "%s: failed to reset pll/freq\n", __func__);
+ pr_err("%s: failed to reset pll/freq\n", __func__);
return ret;
}
@@ -449,13 +452,12 @@ static struct cpufreq_driver s3c24xx_driver = {
int s3c_cpufreq_register(struct s3c_cpufreq_info *info)
{
if (!info || !info->name) {
- printk(KERN_ERR "%s: failed to pass valid information\n",
- __func__);
+ pr_err("%s: failed to pass valid information\n", __func__);
return -EINVAL;
}
- printk(KERN_INFO "S3C24XX CPU Frequency driver, %s cpu support\n",
- info->name);
+ pr_info("S3C24XX CPU Frequency driver, %s cpu support\n",
+ info->name);
/* check our driver info has valid data */
@@ -478,7 +480,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
struct s3c_cpufreq_board *ours;
if (!board) {
- printk(KERN_INFO "%s: no board data\n", __func__);
+ pr_info("%s: no board data\n", __func__);
return -EINVAL;
}
@@ -487,7 +489,7 @@ int __init s3c_cpufreq_setboard(struct s3c_cpufreq_board *board)
ours = kzalloc(sizeof(*ours), GFP_KERNEL);
if (ours == NULL) {
- printk(KERN_ERR "%s: no memory\n", __func__);
+ pr_err("%s: no memory\n", __func__);
return -ENOMEM;
}
@@ -502,15 +504,15 @@ static int __init s3c_cpufreq_auto_io(void)
int ret;
if (!cpu_cur.info->get_iotiming) {
- printk(KERN_ERR "%s: get_iotiming undefined\n", __func__);
+ pr_err("%s: get_iotiming undefined\n", __func__);
return -ENOENT;
}
- printk(KERN_INFO "%s: working out IO settings\n", __func__);
+ pr_info("%s: working out IO settings\n", __func__);
ret = (cpu_cur.info->get_iotiming)(&cpu_cur, &s3c24xx_iotiming);
if (ret)
- printk(KERN_ERR "%s: failed to get timings\n", __func__);
+ pr_err("%s: failed to get timings\n", __func__);
return ret;
}
@@ -561,7 +563,7 @@ static void s3c_cpufreq_update_loctkime(void)
val = calc_locktime(rate, cpu_cur.info->locktime_u) << bits;
val |= calc_locktime(rate, cpu_cur.info->locktime_m);
- printk(KERN_INFO "%s: new locktime is 0x%08x\n", __func__, val);
+ pr_info("%s: new locktime is 0x%08x\n", __func__, val);
__raw_writel(val, S3C2410_LOCKTIME);
}
@@ -580,7 +582,7 @@ static int s3c_cpufreq_build_freq(void)
ftab = kzalloc(sizeof(*ftab) * size, GFP_KERNEL);
if (!ftab) {
- printk(KERN_ERR "%s: no memory for tables\n", __func__);
+ pr_err("%s: no memory for tables\n", __func__);
return -ENOMEM;
}
@@ -608,15 +610,14 @@ static int __init s3c_cpufreq_initcall(void)
if (cpu_cur.board->auto_io) {
ret = s3c_cpufreq_auto_io();
if (ret) {
- printk(KERN_ERR "%s: failed to get io timing\n",
+ pr_err("%s: failed to get io timing\n",
__func__);
goto out;
}
}
if (cpu_cur.board->need_io && !cpu_cur.info->set_iotiming) {
- printk(KERN_ERR "%s: no IO support registered\n",
- __func__);
+ pr_err("%s: no IO support registered\n", __func__);
ret = -EINVAL;
goto out;
}
@@ -666,9 +667,9 @@ int s3c_plltab_register(struct cpufreq_frequency_table *plls,
vals += plls_no;
vals->frequency = CPUFREQ_TABLE_END;
- printk(KERN_INFO "cpufreq: %d PLL entries\n", plls_no);
+ pr_info("%d PLL entries\n", plls_no);
} else
- printk(KERN_ERR "cpufreq: no memory for PLL tables\n");
+ pr_err("no memory for PLL tables\n");
return vals ? 0 : -ENOMEM;
}
diff --git a/drivers/cpufreq/s5pv210-cpufreq.c b/drivers/cpufreq/s5pv210-cpufreq.c
index a145b319d171..06d85917b6d5 100644
--- a/drivers/cpufreq/s5pv210-cpufreq.c
+++ b/drivers/cpufreq/s5pv210-cpufreq.c
@@ -9,6 +9,8 @@
* published by the Free Software Foundation.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/init.h>
@@ -205,7 +207,7 @@ static void s5pv210_set_refresh(enum s5pv210_dmc_port ch, unsigned long freq)
} else if (ch == DMC1) {
reg = (dmc_base[1] + 0x30);
} else {
- printk(KERN_ERR "Cannot find DMC port\n");
+ pr_err("Cannot find DMC port\n");
return;
}
@@ -534,7 +536,7 @@ static int s5pv210_cpu_init(struct cpufreq_policy *policy)
mem_type = check_mem_type(dmc_base[0]);
if ((mem_type != LPDDR) && (mem_type != LPDDR2)) {
- printk(KERN_ERR "CPUFreq doesn't support this memory type\n");
+ pr_err("CPUFreq doesn't support this memory type\n");
ret = -EINVAL;
goto out_dmc1;
}
@@ -635,13 +637,13 @@ static int s5pv210_cpufreq_probe(struct platform_device *pdev)
arm_regulator = regulator_get(NULL, "vddarm");
if (IS_ERR(arm_regulator)) {
- pr_err("failed to get regulator vddarm");
+ pr_err("failed to get regulator vddarm\n");
return PTR_ERR(arm_regulator);
}
int_regulator = regulator_get(NULL, "vddint");
if (IS_ERR(int_regulator)) {
- pr_err("failed to get regulator vddint");
+ pr_err("failed to get regulator vddint\n");
regulator_put(arm_regulator);
return PTR_ERR(int_regulator);
}
diff --git a/drivers/cpufreq/sc520_freq.c b/drivers/cpufreq/sc520_freq.c
index ac84e4818014..4225501a4b78 100644
--- a/drivers/cpufreq/sc520_freq.c
+++ b/drivers/cpufreq/sc520_freq.c
@@ -13,6 +13,8 @@
* 2005-03-30: - initial revision
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -30,8 +32,6 @@
static __u8 __iomem *cpuctl;
-#define PFX "sc520_freq: "
-
static struct cpufreq_frequency_table sc520_freq_table[] = {
{0, 0x01, 100000},
{0, 0x02, 133000},
@@ -44,8 +44,8 @@ static unsigned int sc520_freq_get_cpu_frequency(unsigned int cpu)
switch (clockspeed_reg & 0x03) {
default:
- printk(KERN_ERR PFX "error: cpuctl register has unexpected "
- "value %02x\n", clockspeed_reg);
+ pr_err("error: cpuctl register has unexpected value %02x\n",
+ clockspeed_reg);
case 0x01:
return 100000;
case 0x02:
@@ -112,7 +112,7 @@ static int __init sc520_freq_init(void)
cpuctl = ioremap((unsigned long)(MMCR_BASE + OFFS_CPUCTL), 1);
if (!cpuctl) {
- printk(KERN_ERR "sc520_freq: error: failed to remap memory\n");
+ pr_err("sc520_freq: error: failed to remap memory\n");
return -ENOMEM;
}
diff --git a/drivers/cpufreq/speedstep-centrino.c b/drivers/cpufreq/speedstep-centrino.c
index 7d4a31571608..41bc5397f4bb 100644
--- a/drivers/cpufreq/speedstep-centrino.c
+++ b/drivers/cpufreq/speedstep-centrino.c
@@ -13,6 +13,8 @@
* Copyright (C) 2003 Jeremy Fitzhardinge <jeremy@goop.org>
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -27,7 +29,6 @@
#include <asm/cpufeature.h>
#include <asm/cpu_device_id.h>
-#define PFX "speedstep-centrino: "
#define MAINTAINER "linux-pm@vger.kernel.org"
#define INTEL_MSR_RANGE (0xffff)
@@ -386,8 +387,7 @@ static int centrino_cpu_init(struct cpufreq_policy *policy)
/* check to see if it stuck */
rdmsr(MSR_IA32_MISC_ENABLE, l, h);
if (!(l & MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP)) {
- printk(KERN_INFO PFX
- "couldn't enable Enhanced SpeedStep\n");
+ pr_info("couldn't enable Enhanced SpeedStep\n");
return -ENODEV;
}
}
diff --git a/drivers/cpufreq/speedstep-ich.c b/drivers/cpufreq/speedstep-ich.c
index 37555c6b86a7..b86953a3ddc4 100644
--- a/drivers/cpufreq/speedstep-ich.c
+++ b/drivers/cpufreq/speedstep-ich.c
@@ -18,6 +18,8 @@
* SPEEDSTEP - DEFINITIONS *
*********************************************************************/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
@@ -68,13 +70,13 @@ static int speedstep_find_register(void)
/* get PMBASE */
pci_read_config_dword(speedstep_chipset_dev, 0x40, &pmbase);
if (!(pmbase & 0x01)) {
- printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ pr_err("could not find speedstep register\n");
return -ENODEV;
}
pmbase &= 0xFFFFFFFE;
if (!pmbase) {
- printk(KERN_ERR "speedstep-ich: could not find speedstep register\n");
+ pr_err("could not find speedstep register\n");
return -ENODEV;
}
@@ -136,7 +138,7 @@ static void speedstep_set_state(unsigned int state)
pr_debug("change to %u MHz succeeded\n",
speedstep_get_frequency(speedstep_processor) / 1000);
else
- printk(KERN_ERR "cpufreq: change failed - I/O error\n");
+ pr_err("change failed - I/O error\n");
return;
}
diff --git a/drivers/cpufreq/speedstep-lib.c b/drivers/cpufreq/speedstep-lib.c
index 15d3214aaa00..1b8062182c81 100644
--- a/drivers/cpufreq/speedstep-lib.c
+++ b/drivers/cpufreq/speedstep-lib.c
@@ -8,6 +8,8 @@
* BIG FAT DISCLAIMER: Work in progress code. Possibly *dangerous*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -153,7 +155,7 @@ static unsigned int pentium_core_get_frequency(void)
fsb = 333333;
break;
default:
- printk(KERN_ERR "PCORE - MSR_FSB_FREQ undefined value");
+ pr_err("PCORE - MSR_FSB_FREQ undefined value\n");
}
rdmsr(MSR_IA32_EBL_CR_POWERON, msr_lo, msr_tmp);
@@ -453,11 +455,8 @@ unsigned int speedstep_get_freqs(enum speedstep_processor processor,
*/
if (*transition_latency > 10000000 ||
*transition_latency < 50000) {
- printk(KERN_WARNING PFX "frequency transition "
- "measured seems out of range (%u "
- "nSec), falling back to a safe one of"
- "%u nSec.\n",
- *transition_latency, 500000);
+ pr_warn("frequency transition measured seems out of range (%u nSec), falling back to a safe one of %u nSec\n",
+ *transition_latency, 500000);
*transition_latency = 500000;
}
}
diff --git a/drivers/cpufreq/speedstep-smi.c b/drivers/cpufreq/speedstep-smi.c
index 819229e824fb..770a9ae1999a 100644
--- a/drivers/cpufreq/speedstep-smi.c
+++ b/drivers/cpufreq/speedstep-smi.c
@@ -12,6 +12,8 @@
* SPEEDSTEP - DEFINITIONS *
*********************************************************************/
+#define pr_fmt(fmt) "cpufreq: " fmt
+
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
@@ -204,9 +206,8 @@ static void speedstep_set_state(unsigned int state)
(speedstep_freqs[new_state].frequency / 1000),
retry, result);
else
- printk(KERN_ERR "cpufreq: change to state %u "
- "failed with new_state %u and result %u\n",
- state, new_state, result);
+ pr_err("change to state %u failed with new_state %u and result %u\n",
+ state, new_state, result);
return;
}
diff --git a/drivers/cpufreq/tegra124-cpufreq.c b/drivers/cpufreq/tegra124-cpufreq.c
index 20bcceb58ccc..43530254201a 100644
--- a/drivers/cpufreq/tegra124-cpufreq.c
+++ b/drivers/cpufreq/tegra124-cpufreq.c
@@ -14,7 +14,6 @@
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
#include <linux/clk.h>
-#include <linux/cpufreq-dt.h>
#include <linux/err.h>
#include <linux/init.h>
#include <linux/kernel.h>
@@ -69,10 +68,6 @@ static void tegra124_cpu_switch_to_pllx(struct tegra124_cpufreq_priv *priv)
clk_set_parent(priv->cpu_clk, priv->pllx_clk);
}
-static struct cpufreq_dt_platform_data cpufreq_dt_pd = {
- .independent_clocks = false,
-};
-
static int tegra124_cpufreq_probe(struct platform_device *pdev)
{
struct tegra124_cpufreq_priv *priv;
@@ -129,8 +124,6 @@ static int tegra124_cpufreq_probe(struct platform_device *pdev)
cpufreq_dt_devinfo.name = "cpufreq-dt";
cpufreq_dt_devinfo.parent = &pdev->dev;
- cpufreq_dt_devinfo.data = &cpufreq_dt_pd;
- cpufreq_dt_devinfo.size_data = sizeof(cpufreq_dt_pd);
priv->cpufreq_dt_pdev =
platform_device_register_full(&cpufreq_dt_devinfo);
diff --git a/include/linux/cpufreq-dt.h b/include/linux/cpufreq-dt.h
index 0414009e2c30..a87335a1660c 100644
--- a/include/linux/cpufreq-dt.h
+++ b/include/linux/cpufreq-dt.h
@@ -10,6 +10,8 @@
#ifndef __CPUFREQ_DT_H__
#define __CPUFREQ_DT_H__
+#include <linux/types.h>
+
struct cpufreq_dt_platform_data {
/*
* True when each CPU has its own clock to control its
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 718e8725de8a..4e81e08db752 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -102,6 +102,17 @@ struct cpufreq_policy {
*/
struct rw_semaphore rwsem;
+ /*
+ * Fast switch flags:
+ * - fast_switch_possible should be set by the driver if it can
+ * guarantee that frequency can be changed on any CPU sharing the
+ * policy and that the change will affect all of the policy CPUs then.
+ * - fast_switch_enabled is to be set by governors that support fast
+ * freqnency switching with the help of cpufreq_enable_fast_switch().
+ */
+ bool fast_switch_possible;
+ bool fast_switch_enabled;
+
/* Synchronization for frequency transitions */
bool transition_ongoing; /* Tracks transition status */
spinlock_t transition_lock;
@@ -156,6 +167,8 @@ int cpufreq_get_policy(struct cpufreq_policy *policy, unsigned int cpu);
int cpufreq_update_policy(unsigned int cpu);
bool have_governor_per_policy(void);
struct kobject *get_governor_parent_kobj(struct cpufreq_policy *policy);
+void cpufreq_enable_fast_switch(struct cpufreq_policy *policy);
+void cpufreq_disable_fast_switch(struct cpufreq_policy *policy);
#else
static inline unsigned int cpufreq_get(unsigned int cpu)
{
@@ -236,6 +249,8 @@ struct cpufreq_driver {
unsigned int relation); /* Deprecated */
int (*target_index)(struct cpufreq_policy *policy,
unsigned int index);
+ unsigned int (*fast_switch)(struct cpufreq_policy *policy,
+ unsigned int target_freq);
/*
* Only for drivers with target_index() and CPUFREQ_ASYNC_NOTIFICATION
* unset.
@@ -426,6 +441,20 @@ static inline unsigned long cpufreq_scale(unsigned long old, u_int div,
#define CPUFREQ_POLICY_POWERSAVE (1)
#define CPUFREQ_POLICY_PERFORMANCE (2)
+/*
+ * The polling frequency depends on the capability of the processor. Default
+ * polling frequency is 1000 times the transition latency of the processor. The
+ * ondemand governor will work on any processor with transition latency <= 10ms,
+ * using appropriate sampling rate.
+ *
+ * For CPUs with transition latency > 10ms (mostly drivers with CPUFREQ_ETERNAL)
+ * the ondemand governor will not work. All times here are in us (microseconds).
+ */
+#define MIN_SAMPLING_RATE_RATIO (2)
+#define LATENCY_MULTIPLIER (1000)
+#define MIN_LATENCY_MULTIPLIER (20)
+#define TRANSITION_LATENCY_LIMIT (10 * 1000 * 1000)
+
/* Governor Events */
#define CPUFREQ_GOV_START 1
#define CPUFREQ_GOV_STOP 2
@@ -450,6 +479,8 @@ struct cpufreq_governor {
};
/* Pass a target to the cpufreq driver */
+unsigned int cpufreq_driver_fast_switch(struct cpufreq_policy *policy,
+ unsigned int target_freq);
int cpufreq_driver_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation);
@@ -462,6 +493,29 @@ void cpufreq_unregister_governor(struct cpufreq_governor *governor);
struct cpufreq_governor *cpufreq_default_governor(void);
struct cpufreq_governor *cpufreq_fallback_governor(void);
+/* Governor attribute set */
+struct gov_attr_set {
+ struct kobject kobj;
+ struct list_head policy_list;
+ struct mutex update_lock;
+ int usage_count;
+};
+
+/* sysfs ops for cpufreq governors */
+extern const struct sysfs_ops governor_sysfs_ops;
+
+void gov_attr_set_init(struct gov_attr_set *attr_set, struct list_head *list_node);
+void gov_attr_set_get(struct gov_attr_set *attr_set, struct list_head *list_node);
+unsigned int gov_attr_set_put(struct gov_attr_set *attr_set, struct list_head *list_node);
+
+/* Governor sysfs attribute */
+struct governor_attr {
+ struct attribute attr;
+ ssize_t (*show)(struct gov_attr_set *attr_set, char *buf);
+ ssize_t (*store)(struct gov_attr_set *attr_set, const char *buf,
+ size_t count);
+};
+
/*********************************************************************
* FREQUENCY TABLE HELPERS *
*********************************************************************/
diff --git a/include/linux/sched.h b/include/linux/sched.h
index 52c4847b05e2..8344e1947eec 100644
--- a/include/linux/sched.h
+++ b/include/linux/sched.h
@@ -3240,7 +3240,10 @@ struct update_util_data {
u64 time, unsigned long util, unsigned long max);
};
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data);
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+ void (*func)(struct update_util_data *data, u64 time,
+ unsigned long util, unsigned long max));
+void cpufreq_remove_update_util_hook(int cpu);
#endif /* CONFIG_CPU_FREQ */
#endif
diff --git a/kernel/sched/Makefile b/kernel/sched/Makefile
index 414d9c16da42..5e59b832ae2b 100644
--- a/kernel/sched/Makefile
+++ b/kernel/sched/Makefile
@@ -24,3 +24,4 @@ obj-$(CONFIG_SCHEDSTATS) += stats.o
obj-$(CONFIG_SCHED_DEBUG) += debug.o
obj-$(CONFIG_CGROUP_CPUACCT) += cpuacct.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
+obj-$(CONFIG_CPU_FREQ_GOV_SCHEDUTIL) += cpufreq_schedutil.o
diff --git a/kernel/sched/cpufreq.c b/kernel/sched/cpufreq.c
index 928c4ba32f68..1141954e73b4 100644
--- a/kernel/sched/cpufreq.c
+++ b/kernel/sched/cpufreq.c
@@ -14,24 +14,50 @@
DEFINE_PER_CPU(struct update_util_data *, cpufreq_update_util_data);
/**
- * cpufreq_set_update_util_data - Populate the CPU's update_util_data pointer.
+ * cpufreq_add_update_util_hook - Populate the CPU's update_util_data pointer.
* @cpu: The CPU to set the pointer for.
* @data: New pointer value.
+ * @func: Callback function to set for the CPU.
*
- * Set and publish the update_util_data pointer for the given CPU. That pointer
- * points to a struct update_util_data object containing a callback function
- * to call from cpufreq_update_util(). That function will be called from an RCU
- * read-side critical section, so it must not sleep.
+ * Set and publish the update_util_data pointer for the given CPU.
*
- * Callers must use RCU-sched callbacks to free any memory that might be
- * accessed via the old update_util_data pointer or invoke synchronize_sched()
- * right after this function to avoid use-after-free.
+ * The update_util_data pointer of @cpu is set to @data and the callback
+ * function pointer in the target struct update_util_data is set to @func.
+ * That function will be called by cpufreq_update_util() from RCU-sched
+ * read-side critical sections, so it must not sleep. @data will always be
+ * passed to it as the first argument which allows the function to get to the
+ * target update_util_data structure and its container.
+ *
+ * The update_util_data pointer of @cpu must be NULL when this function is
+ * called or it will WARN() and return with no effect.
*/
-void cpufreq_set_update_util_data(int cpu, struct update_util_data *data)
+void cpufreq_add_update_util_hook(int cpu, struct update_util_data *data,
+ void (*func)(struct update_util_data *data, u64 time,
+ unsigned long util, unsigned long max))
{
- if (WARN_ON(data && !data->func))
+ if (WARN_ON(!data || !func))
return;
+ if (WARN_ON(per_cpu(cpufreq_update_util_data, cpu)))
+ return;
+
+ data->func = func;
rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), data);
}
-EXPORT_SYMBOL_GPL(cpufreq_set_update_util_data);
+EXPORT_SYMBOL_GPL(cpufreq_add_update_util_hook);
+
+/**
+ * cpufreq_remove_update_util_hook - Clear the CPU's update_util_data pointer.
+ * @cpu: The CPU to clear the pointer for.
+ *
+ * Clear the update_util_data pointer for the given CPU.
+ *
+ * Callers must use RCU-sched callbacks to free any memory that might be
+ * accessed via the old update_util_data pointer or invoke synchronize_sched()
+ * right after this function to avoid use-after-free.
+ */
+void cpufreq_remove_update_util_hook(int cpu)
+{
+ rcu_assign_pointer(per_cpu(cpufreq_update_util_data, cpu), NULL);
+}
+EXPORT_SYMBOL_GPL(cpufreq_remove_update_util_hook);
diff --git a/kernel/sched/cpufreq_schedutil.c b/kernel/sched/cpufreq_schedutil.c
new file mode 100644
index 000000000000..154ae3a51e86
--- /dev/null
+++ b/kernel/sched/cpufreq_schedutil.c
@@ -0,0 +1,530 @@
+/*
+ * CPUFreq governor based on scheduler-provided CPU utilization data.
+ *
+ * Copyright (C) 2016, Intel Corporation
+ * Author: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <trace/events/power.h>
+
+#include "sched.h"
+
+struct sugov_tunables {
+ struct gov_attr_set attr_set;
+ unsigned int rate_limit_us;
+};
+
+struct sugov_policy {
+ struct cpufreq_policy *policy;
+
+ struct sugov_tunables *tunables;
+ struct list_head tunables_hook;
+
+ raw_spinlock_t update_lock; /* For shared policies */
+ u64 last_freq_update_time;
+ s64 freq_update_delay_ns;
+ unsigned int next_freq;
+
+ /* The next fields are only needed if fast switch cannot be used. */
+ struct irq_work irq_work;
+ struct work_struct work;
+ struct mutex work_lock;
+ bool work_in_progress;
+
+ bool need_freq_update;
+};
+
+struct sugov_cpu {
+ struct update_util_data update_util;
+ struct sugov_policy *sg_policy;
+
+ /* The fields below are only needed when sharing a policy. */
+ unsigned long util;
+ unsigned long max;
+ u64 last_update;
+};
+
+static DEFINE_PER_CPU(struct sugov_cpu, sugov_cpu);
+
+/************************ Governor internals ***********************/
+
+static bool sugov_should_update_freq(struct sugov_policy *sg_policy, u64 time)
+{
+ s64 delta_ns;
+
+ if (sg_policy->work_in_progress)
+ return false;
+
+ if (unlikely(sg_policy->need_freq_update)) {
+ sg_policy->need_freq_update = false;
+ /*
+ * This happens when limits change, so forget the previous
+ * next_freq value and force an update.
+ */
+ sg_policy->next_freq = UINT_MAX;
+ return true;
+ }
+
+ delta_ns = time - sg_policy->last_freq_update_time;
+ return delta_ns >= sg_policy->freq_update_delay_ns;
+}
+
+static void sugov_update_commit(struct sugov_policy *sg_policy, u64 time,
+ unsigned int next_freq)
+{
+ struct cpufreq_policy *policy = sg_policy->policy;
+
+ sg_policy->last_freq_update_time = time;
+
+ if (policy->fast_switch_enabled) {
+ if (sg_policy->next_freq == next_freq) {
+ trace_cpu_frequency(policy->cur, smp_processor_id());
+ return;
+ }
+ sg_policy->next_freq = next_freq;
+ next_freq = cpufreq_driver_fast_switch(policy, next_freq);
+ if (next_freq == CPUFREQ_ENTRY_INVALID)
+ return;
+
+ policy->cur = next_freq;
+ trace_cpu_frequency(next_freq, smp_processor_id());
+ } else if (sg_policy->next_freq != next_freq) {
+ sg_policy->next_freq = next_freq;
+ sg_policy->work_in_progress = true;
+ irq_work_queue(&sg_policy->irq_work);
+ }
+}
+
+/**
+ * get_next_freq - Compute a new frequency for a given cpufreq policy.
+ * @policy: cpufreq policy object to compute the new frequency for.
+ * @util: Current CPU utilization.
+ * @max: CPU capacity.
+ *
+ * If the utilization is frequency-invariant, choose the new frequency to be
+ * proportional to it, that is
+ *
+ * next_freq = C * max_freq * util / max
+ *
+ * Otherwise, approximate the would-be frequency-invariant utilization by
+ * util_raw * (curr_freq / max_freq) which leads to
+ *
+ * next_freq = C * curr_freq * util_raw / max
+ *
+ * Take C = 1.25 for the frequency tipping point at (util / max) = 0.8.
+ */
+static unsigned int get_next_freq(struct cpufreq_policy *policy,
+ unsigned long util, unsigned long max)
+{
+ unsigned int freq = arch_scale_freq_invariant() ?
+ policy->cpuinfo.max_freq : policy->cur;
+
+ return (freq + (freq >> 2)) * util / max;
+}
+
+static void sugov_update_single(struct update_util_data *hook, u64 time,
+ unsigned long util, unsigned long max)
+{
+ struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+ struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+ struct cpufreq_policy *policy = sg_policy->policy;
+ unsigned int next_f;
+
+ if (!sugov_should_update_freq(sg_policy, time))
+ return;
+
+ next_f = util == ULONG_MAX ? policy->cpuinfo.max_freq :
+ get_next_freq(policy, util, max);
+ sugov_update_commit(sg_policy, time, next_f);
+}
+
+static unsigned int sugov_next_freq_shared(struct sugov_policy *sg_policy,
+ unsigned long util, unsigned long max)
+{
+ struct cpufreq_policy *policy = sg_policy->policy;
+ unsigned int max_f = policy->cpuinfo.max_freq;
+ u64 last_freq_update_time = sg_policy->last_freq_update_time;
+ unsigned int j;
+
+ if (util == ULONG_MAX)
+ return max_f;
+
+ for_each_cpu(j, policy->cpus) {
+ struct sugov_cpu *j_sg_cpu;
+ unsigned long j_util, j_max;
+ s64 delta_ns;
+
+ if (j == smp_processor_id())
+ continue;
+
+ j_sg_cpu = &per_cpu(sugov_cpu, j);
+ /*
+ * If the CPU utilization was last updated before the previous
+ * frequency update and the time elapsed between the last update
+ * of the CPU utilization and the last frequency update is long
+ * enough, don't take the CPU into account as it probably is
+ * idle now.
+ */
+ delta_ns = last_freq_update_time - j_sg_cpu->last_update;
+ if (delta_ns > TICK_NSEC)
+ continue;
+
+ j_util = j_sg_cpu->util;
+ if (j_util == ULONG_MAX)
+ return max_f;
+
+ j_max = j_sg_cpu->max;
+ if (j_util * max > j_max * util) {
+ util = j_util;
+ max = j_max;
+ }
+ }
+
+ return get_next_freq(policy, util, max);
+}
+
+static void sugov_update_shared(struct update_util_data *hook, u64 time,
+ unsigned long util, unsigned long max)
+{
+ struct sugov_cpu *sg_cpu = container_of(hook, struct sugov_cpu, update_util);
+ struct sugov_policy *sg_policy = sg_cpu->sg_policy;
+ unsigned int next_f;
+
+ raw_spin_lock(&sg_policy->update_lock);
+
+ sg_cpu->util = util;
+ sg_cpu->max = max;
+ sg_cpu->last_update = time;
+
+ if (sugov_should_update_freq(sg_policy, time)) {
+ next_f = sugov_next_freq_shared(sg_policy, util, max);
+ sugov_update_commit(sg_policy, time, next_f);
+ }
+
+ raw_spin_unlock(&sg_policy->update_lock);
+}
+
+static void sugov_work(struct work_struct *work)
+{
+ struct sugov_policy *sg_policy = container_of(work, struct sugov_policy, work);
+
+ mutex_lock(&sg_policy->work_lock);
+ __cpufreq_driver_target(sg_policy->policy, sg_policy->next_freq,
+ CPUFREQ_RELATION_L);
+ mutex_unlock(&sg_policy->work_lock);
+
+ sg_policy->work_in_progress = false;
+}
+
+static void sugov_irq_work(struct irq_work *irq_work)
+{
+ struct sugov_policy *sg_policy;
+
+ sg_policy = container_of(irq_work, struct sugov_policy, irq_work);
+ schedule_work_on(smp_processor_id(), &sg_policy->work);
+}
+
+/************************** sysfs interface ************************/
+
+static struct sugov_tunables *global_tunables;
+static DEFINE_MUTEX(global_tunables_lock);
+
+static inline struct sugov_tunables *to_sugov_tunables(struct gov_attr_set *attr_set)
+{
+ return container_of(attr_set, struct sugov_tunables, attr_set);
+}
+
+static ssize_t rate_limit_us_show(struct gov_attr_set *attr_set, char *buf)
+{
+ struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+
+ return sprintf(buf, "%u\n", tunables->rate_limit_us);
+}
+
+static ssize_t rate_limit_us_store(struct gov_attr_set *attr_set, const char *buf,
+ size_t count)
+{
+ struct sugov_tunables *tunables = to_sugov_tunables(attr_set);
+ struct sugov_policy *sg_policy;
+ unsigned int rate_limit_us;
+
+ if (kstrtouint(buf, 10, &rate_limit_us))
+ return -EINVAL;
+
+ tunables->rate_limit_us = rate_limit_us;
+
+ list_for_each_entry(sg_policy, &attr_set->policy_list, tunables_hook)
+ sg_policy->freq_update_delay_ns = rate_limit_us * NSEC_PER_USEC;
+
+ return count;
+}
+
+static struct governor_attr rate_limit_us = __ATTR_RW(rate_limit_us);
+
+static struct attribute *sugov_attributes[] = {
+ &rate_limit_us.attr,
+ NULL
+};
+
+static struct kobj_type sugov_tunables_ktype = {
+ .default_attrs = sugov_attributes,
+ .sysfs_ops = &governor_sysfs_ops,
+};
+
+/********************** cpufreq governor interface *********************/
+
+static struct cpufreq_governor schedutil_gov;
+
+static struct sugov_policy *sugov_policy_alloc(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy;
+
+ sg_policy = kzalloc(sizeof(*sg_policy), GFP_KERNEL);
+ if (!sg_policy)
+ return NULL;
+
+ sg_policy->policy = policy;
+ init_irq_work(&sg_policy->irq_work, sugov_irq_work);
+ INIT_WORK(&sg_policy->work, sugov_work);
+ mutex_init(&sg_policy->work_lock);
+ raw_spin_lock_init(&sg_policy->update_lock);
+ return sg_policy;
+}
+
+static void sugov_policy_free(struct sugov_policy *sg_policy)
+{
+ mutex_destroy(&sg_policy->work_lock);
+ kfree(sg_policy);
+}
+
+static struct sugov_tunables *sugov_tunables_alloc(struct sugov_policy *sg_policy)
+{
+ struct sugov_tunables *tunables;
+
+ tunables = kzalloc(sizeof(*tunables), GFP_KERNEL);
+ if (tunables) {
+ gov_attr_set_init(&tunables->attr_set, &sg_policy->tunables_hook);
+ if (!have_governor_per_policy())
+ global_tunables = tunables;
+ }
+ return tunables;
+}
+
+static void sugov_tunables_free(struct sugov_tunables *tunables)
+{
+ if (!have_governor_per_policy())
+ global_tunables = NULL;
+
+ kfree(tunables);
+}
+
+static int sugov_init(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy;
+ struct sugov_tunables *tunables;
+ unsigned int lat;
+ int ret = 0;
+
+ /* State should be equivalent to EXIT */
+ if (policy->governor_data)
+ return -EBUSY;
+
+ sg_policy = sugov_policy_alloc(policy);
+ if (!sg_policy)
+ return -ENOMEM;
+
+ mutex_lock(&global_tunables_lock);
+
+ if (global_tunables) {
+ if (WARN_ON(have_governor_per_policy())) {
+ ret = -EINVAL;
+ goto free_sg_policy;
+ }
+ policy->governor_data = sg_policy;
+ sg_policy->tunables = global_tunables;
+
+ gov_attr_set_get(&global_tunables->attr_set, &sg_policy->tunables_hook);
+ goto out;
+ }
+
+ tunables = sugov_tunables_alloc(sg_policy);
+ if (!tunables) {
+ ret = -ENOMEM;
+ goto free_sg_policy;
+ }
+
+ tunables->rate_limit_us = LATENCY_MULTIPLIER;
+ lat = policy->cpuinfo.transition_latency / NSEC_PER_USEC;
+ if (lat)
+ tunables->rate_limit_us *= lat;
+
+ policy->governor_data = sg_policy;
+ sg_policy->tunables = tunables;
+
+ ret = kobject_init_and_add(&tunables->attr_set.kobj, &sugov_tunables_ktype,
+ get_governor_parent_kobj(policy), "%s",
+ schedutil_gov.name);
+ if (ret)
+ goto fail;
+
+ out:
+ mutex_unlock(&global_tunables_lock);
+
+ cpufreq_enable_fast_switch(policy);
+ return 0;
+
+ fail:
+ policy->governor_data = NULL;
+ sugov_tunables_free(tunables);
+
+ free_sg_policy:
+ mutex_unlock(&global_tunables_lock);
+
+ sugov_policy_free(sg_policy);
+ pr_err("cpufreq: schedutil governor initialization failed (error %d)\n", ret);
+ return ret;
+}
+
+static int sugov_exit(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ struct sugov_tunables *tunables = sg_policy->tunables;
+ unsigned int count;
+
+ cpufreq_disable_fast_switch(policy);
+
+ mutex_lock(&global_tunables_lock);
+
+ count = gov_attr_set_put(&tunables->attr_set, &sg_policy->tunables_hook);
+ policy->governor_data = NULL;
+ if (!count)
+ sugov_tunables_free(tunables);
+
+ mutex_unlock(&global_tunables_lock);
+
+ sugov_policy_free(sg_policy);
+ return 0;
+}
+
+static int sugov_start(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ unsigned int cpu;
+
+ sg_policy->freq_update_delay_ns = sg_policy->tunables->rate_limit_us * NSEC_PER_USEC;
+ sg_policy->last_freq_update_time = 0;
+ sg_policy->next_freq = UINT_MAX;
+ sg_policy->work_in_progress = false;
+ sg_policy->need_freq_update = false;
+
+ for_each_cpu(cpu, policy->cpus) {
+ struct sugov_cpu *sg_cpu = &per_cpu(sugov_cpu, cpu);
+
+ sg_cpu->sg_policy = sg_policy;
+ if (policy_is_shared(policy)) {
+ sg_cpu->util = ULONG_MAX;
+ sg_cpu->max = 0;
+ sg_cpu->last_update = 0;
+ cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+ sugov_update_shared);
+ } else {
+ cpufreq_add_update_util_hook(cpu, &sg_cpu->update_util,
+ sugov_update_single);
+ }
+ }
+ return 0;
+}
+
+static int sugov_stop(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+ unsigned int cpu;
+
+ for_each_cpu(cpu, policy->cpus)
+ cpufreq_remove_update_util_hook(cpu);
+
+ synchronize_sched();
+
+ irq_work_sync(&sg_policy->irq_work);
+ cancel_work_sync(&sg_policy->work);
+ return 0;
+}
+
+static int sugov_limits(struct cpufreq_policy *policy)
+{
+ struct sugov_policy *sg_policy = policy->governor_data;
+
+ if (!policy->fast_switch_enabled) {
+ mutex_lock(&sg_policy->work_lock);
+
+ if (policy->max < policy->cur)
+ __cpufreq_driver_target(policy, policy->max,
+ CPUFREQ_RELATION_H);
+ else if (policy->min > policy->cur)
+ __cpufreq_driver_target(policy, policy->min,
+ CPUFREQ_RELATION_L);
+
+ mutex_unlock(&sg_policy->work_lock);
+ }
+
+ sg_policy->need_freq_update = true;
+ return 0;
+}
+
+int sugov_governor(struct cpufreq_policy *policy, unsigned int event)
+{
+ if (event == CPUFREQ_GOV_POLICY_INIT) {
+ return sugov_init(policy);
+ } else if (policy->governor_data) {
+ switch (event) {
+ case CPUFREQ_GOV_POLICY_EXIT:
+ return sugov_exit(policy);
+ case CPUFREQ_GOV_START:
+ return sugov_start(policy);
+ case CPUFREQ_GOV_STOP:
+ return sugov_stop(policy);
+ case CPUFREQ_GOV_LIMITS:
+ return sugov_limits(policy);
+ }
+ }
+ return -EINVAL;
+}
+
+static struct cpufreq_governor schedutil_gov = {
+ .name = "schedutil",
+ .governor = sugov_governor,
+ .owner = THIS_MODULE,
+};
+
+static int __init sugov_module_init(void)
+{
+ return cpufreq_register_governor(&schedutil_gov);
+}
+
+static void __exit sugov_module_exit(void)
+{
+ cpufreq_unregister_governor(&schedutil_gov);
+}
+
+MODULE_AUTHOR("Rafael J. Wysocki <rafael.j.wysocki@intel.com>");
+MODULE_DESCRIPTION("Utilization-based CPU frequency selection");
+MODULE_LICENSE("GPL");
+
+#ifdef CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL
+struct cpufreq_governor *cpufreq_default_governor(void)
+{
+ return &schedutil_gov;
+}
+
+fs_initcall(sugov_module_init);
+#else
+module_init(sugov_module_init);
+#endif
+module_exit(sugov_module_exit);
diff --git a/kernel/sched/sched.h b/kernel/sched/sched.h
index ec2e8d23527e..921d6e5d33b7 100644
--- a/kernel/sched/sched.h
+++ b/kernel/sched/sched.h
@@ -1842,6 +1842,14 @@ static inline void cpufreq_update_util(u64 time, unsigned long util, unsigned lo
static inline void cpufreq_trigger_update(u64 time) {}
#endif /* CONFIG_CPU_FREQ */
+#ifdef arch_scale_freq_capacity
+#ifndef arch_scale_freq_invariant
+#define arch_scale_freq_invariant() (true)
+#endif
+#else /* arch_scale_freq_capacity */
+#define arch_scale_freq_invariant() (false)
+#endif
+
static inline void account_reset_rq(struct rq *rq)
{
#ifdef CONFIG_IRQ_TIME_ACCOUNTING
diff --git a/kernel/trace/power-traces.c b/kernel/trace/power-traces.c
index 81b87451c0ea..0c7dee221dca 100644
--- a/kernel/trace/power-traces.c
+++ b/kernel/trace/power-traces.c
@@ -15,5 +15,6 @@
EXPORT_TRACEPOINT_SYMBOL_GPL(suspend_resume);
EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_idle);
+EXPORT_TRACEPOINT_SYMBOL_GPL(cpu_frequency);
EXPORT_TRACEPOINT_SYMBOL_GPL(powernv_throttle);