1460 files changed, 61089 insertions, 30045 deletions

diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
index d431e2d00472..df4afbccf037 100644
--- a/Documentation/ABI/stable/sysfs-driver-dma-idxd
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -128,6 +128,8 @@ Date:		Aug 28, 2020
 KernelVersion:	5.10.0
 Contact:	dmaengine@vger.kernel.org
 Description:	The last executed device administrative command's status/error.
+		Also last configuration error overloaded.
+		Writing to it will clear the status.
 
 What:		/sys/bus/dsa/devices/wq<m>.<n>/block_on_fault
 Date:		Oct 27, 2020
@@ -211,6 +213,13 @@ Contact:	dmaengine@vger.kernel.org
 Description:	Indicate whether ATS disable is turned on for the workqueue.
 		0 indicates ATS is on, and 1 indicates ATS is off for the workqueue.
 
+What:		/sys/bus/dsa/devices/wq<m>.<n>/occupancy
+Date		May 25, 2021
+KernelVersion:	5.14.0
+Contact:	dmaengine@vger.kernel.org
+Description:	Show the current number of entries in this WQ if WQ Occupancy
+		Support bit WQ capabilities is 1.
+
 What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
 Date:           Oct 25, 2019
 KernelVersion:  5.6.0
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
index a5c28f606865..284e2dfa61cd 100644
--- a/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -215,6 +215,17 @@ Description:    Sets the skip reset on timeout option for the device. Value of
                 "0" means device will be reset in case some CS has timed out,
                 otherwise it will not be reset.
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/state_dump
+Date:           Oct 2021
+KernelVersion:  5.15
+Contact:        ynudelman@habana.ai
+Description:    Gets the state dump occurring on a CS timeout or failure.
+                State dump is used for debug and is created each time in case of
+                a problem in a CS execution, before reset.
+                Reading from the node returns the newest state dump available.
+                Writing an integer X discards X state dumps, so that the
+                next read would return X+1-st newest state dump.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/stop_on_err
 Date:           Mar 2020
 KernelVersion:  5.6
@@ -230,6 +241,14 @@ Description:    Displays a list with information about the currently user
                 pointers (user virtual addresses) that are pinned and mapped
                 to DMA addresses
 
+What:           /sys/kernel/debug/habanalabs/hl<n>/userptr_lookup
+Date:           Aug 2021
+KernelVersion:  5.15
+Contact:        ogabbay@kernel.org
+Description:    Allows to search for specific user pointers (user virtual
+                addresses) that are pinned and mapped to DMA addresses, and see
+                their resolution to the specific dma address.
+
 What:           /sys/kernel/debug/habanalabs/hl<n>/vm
 Date:           Jan 2019
 KernelVersion:  5.1
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci
index 793cbb76cd25..d4ae03296861 100644
--- a/Documentation/ABI/testing/sysfs-bus-pci
+++ b/Documentation/ABI/testing/sysfs-bus-pci
@@ -121,6 +121,23 @@ Description:
 		child buses, and re-discover devices removed earlier
 		from this part of the device tree.
 
+What:		/sys/bus/pci/devices/.../reset_method
+Date:		August 2021
+Contact:	Amey Narkhede <ameynarkhede03@gmail.com>
+Description:
+		Some devices allow an individual function to be reset
+		without affecting other functions in the same slot.
+
+		For devices that have this support, a file named
+		reset_method is present in sysfs.  Reading this file
+		gives names of the supported and enabled reset methods and
+		their ordering.  Writing a space-separated list of names of
+		reset methods sets the reset methods and ordering to be
+		used when resetting the device.  Writing an empty string
+		disables the ability to reset the device.  Writing
+		"default" enables all supported reset methods in the
+		default ordering.
+
 What:		/sys/bus/pci/devices/.../reset
 Date:		July 2009
 Contact:	Michael S. Tsirkin <mst@redhat.com>
diff --git a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
index db609b97ad58..fb73345cfb8a 100644
--- a/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
+++ b/Documentation/PCI/endpoint/pci-endpoint-cfs.rst
@@ -43,6 +43,7 @@ entries corresponding to EPF driver will be created by the EPF core.
 		.. <EPF Driver1>/
 			... <EPF Device 11>/
 			... <EPF Device 21>/
+			... <EPF Device 31>/
 		.. <EPF Driver2>/
 			... <EPF Device 12>/
 			... <EPF Device 22>/
@@ -68,6 +69,7 @@ created)
 				... subsys_vendor_id
 				... subsys_id
 				... interrupt_pin
+			        ... <Symlink EPF Device 31>/
                                 ... primary/
 			                ... <Symlink EPC Device1>/
                                 ... secondary/
@@ -79,6 +81,13 @@ interface should be added in 'primary' directory and symlink of endpoint
 controller connected to secondary interface should be added in 'secondary'
 directory.
 
+The <EPF Device> directory can have a list of symbolic links
+(<Symlink EPF Device 31>) to other <EPF Device>. These symbolic links should
+be created by the user to represent the virtual functions that are bound to
+the physical function. In the above directory structure <EPF Device 11> is a
+physical function and <EPF Device 31> is a virtual function. An EPF device once
+it's linked to another EPF device, cannot be linked to a EPC device.
+
 EPC Device
 ==========
 
@@ -98,7 +107,8 @@ entries corresponding to EPC device will be created by the EPC core.
 
 The <EPC Device> directory will have a list of symbolic links to
 <EPF Device>. These symbolic links should be created by the user to
-represent the functions present in the endpoint device.
+represent the functions present in the endpoint device. Only <EPF Device>
+that represents a physical function can be linked to a EPC device.
 
 The <EPC Device> directory will also have a *start* field. Once
 "1" is written to this field, the endpoint device will be ready to
diff --git a/Documentation/admin-guide/acpi/ssdt-overlays.rst b/Documentation/admin-guide/acpi/ssdt-overlays.rst
index 5d7e25988085..b5fbf54dca19 100644
--- a/Documentation/admin-guide/acpi/ssdt-overlays.rst
+++ b/Documentation/admin-guide/acpi/ssdt-overlays.rst
@@ -30,22 +30,21 @@ following ASL code can be used::
         {
             Device (STAC)
             {
-                Name (_ADR, Zero)
                 Name (_HID, "BMA222E")
+                Name (RBUF, ResourceTemplate ()
+                {
+                    I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
+                                AddressingMode7Bit, "\\_SB.I2C6", 0x00,
+                                ResourceConsumer, ,)
+                    GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
+                            "\\_SB.GPO2", 0x00, ResourceConsumer, , )
+                    { // Pin list
+                        0
+                    }
+                })
 
                 Method (_CRS, 0, Serialized)
                 {
-                    Name (RBUF, ResourceTemplate ()
-                    {
-                        I2cSerialBus (0x0018, ControllerInitiated, 0x00061A80,
-                                    AddressingMode7Bit, "\\_SB.I2C6", 0x00,
-                                    ResourceConsumer, ,)
-                        GpioInt (Edge, ActiveHigh, Exclusive, PullDown, 0x0000,
-                                "\\_SB.GPO2", 0x00, ResourceConsumer, , )
-                        { // Pin list
-                            0
-                        }
-                    })
                     Return (RBUF)
                 }
             }
@@ -75,7 +74,7 @@ This option allows loading of user defined SSDTs from initrd and it is useful
 when the system does not support EFI or when there is not enough EFI storage.
 
 It works in a similar way with initrd based ACPI tables override/upgrade: SSDT
-aml code must be placed in the first, uncompressed, initrd under the
+AML code must be placed in the first, uncompressed, initrd under the
 "kernel/firmware/acpi" path. Multiple files can be used and this will translate
 in loading multiple tables. Only SSDT and OEM tables are allowed. See
 initrd_table_override.txt for more details.
@@ -103,12 +102,14 @@ This is the preferred method, when EFI is supported on the platform, because it
 allows a persistent, OS independent way of storing the user defined SSDTs. There
 is also work underway to implement EFI support for loading user defined SSDTs
 and using this method will make it easier to convert to the EFI loading
-mechanism when that will arrive.
+mechanism when that will arrive. To enable it, the
+CONFIG_EFI_CUSTOM_SSDT_OVERLAYS shoyld be chosen to y.
 
-In order to load SSDTs from an EFI variable the efivar_ssdt kernel command line
-parameter can be used. The argument for the option is the variable name to
-use. If there are multiple variables with the same name but with different
-vendor GUIDs, all of them will be loaded.
+In order to load SSDTs from an EFI variable the ``"efivar_ssdt=..."`` kernel
+command line parameter can be used (the name has a limitation of 16 characters).
+The argument for the option is the variable name to use. If there are multiple
+variables with the same name but with different vendor GUIDs, all of them will
+be loaded.
 
 In order to store the AML code in an EFI variable the efivarfs filesystem can be
 used. It is enabled and mounted by default in /sys/firmware/efi/efivars in all
@@ -127,7 +128,7 @@ variable with the content from a given file::
 
     #!/bin/sh -e
 
-    while ! [ -z "$1" ]; do
+    while [ -n "$1" ]; do
             case "$1" in
             "-f") filename="$2"; shift;;
             "-g") guid="$2"; shift;;
@@ -167,14 +168,14 @@ variable with the content from a given file::
 Loading ACPI SSDTs from configfs
 ================================
 
-This option allows loading of user defined SSDTs from userspace via the configfs
+This option allows loading of user defined SSDTs from user space via the configfs
 interface. The CONFIG_ACPI_CONFIGFS option must be select and configfs must be
 mounted. In the following examples, we assume that configfs has been mounted in
-/config.
+/sys/kernel/config.
 
-New tables can be loading by creating new directories in /config/acpi/table/ and
-writing the SSDT aml code in the aml attribute::
+New tables can be loading by creating new directories in /sys/kernel/config/acpi/table
+and writing the SSDT AML code in the aml attribute::
 
-    cd /config/acpi/table
+    cd /sys/kernel/config/acpi/table
     mkdir my_ssdt
     cat ~/ssdt.aml > my_ssdt/aml
diff --git a/Documentation/admin-guide/bootconfig.rst b/Documentation/admin-guide/bootconfig.rst
index 6a79f2e59396..a1860fc0ca88 100644
--- a/Documentation/admin-guide/bootconfig.rst
+++ b/Documentation/admin-guide/bootconfig.rst
@@ -178,7 +178,7 @@ update the boot loader and the kernel image itself as long as the boot
 loader passes the correct initrd file size. If by any chance, the boot
 loader passes a longer size, the kernel fails to find the bootconfig data.
 
-To do this operation, Linux kernel provides "bootconfig" command under
+To do this operation, Linux kernel provides ``bootconfig`` command under
 tools/bootconfig, which allows admin to apply or delete the config file
 to/from initrd image. You can build it by the following command::
 
@@ -196,6 +196,43 @@ To remove the config from the image, you can use -d option as below::
 Then add "bootconfig" on the normal kernel command line to tell the
 kernel to look for the bootconfig at the end of the initrd file.
 
+
+Kernel parameters via Boot Config
+=================================
+
+In addition to the kernel command line, the boot config can be used for
+passing the kernel parameters. All the key-value pairs under ``kernel``
+key will be passed to kernel cmdline directly. Moreover, the key-value
+pairs under ``init`` will be passed to init process via the cmdline.
+The parameters are concatinated with user-given kernel cmdline string
+as the following order, so that the command line parameter can override
+bootconfig parameters (this depends on how the subsystem handles parameters
+but in general, earlier parameter will be overwritten by later one.)::
+
+ [bootconfig params][cmdline params] -- [bootconfig init params][cmdline init params]
+
+Here is an example of the bootconfig file for kernel/init parameters.::
+
+ kernel {
+   root = 01234567-89ab-cdef-0123-456789abcd
+ }
+ init {
+  splash
+ }
+
+This will be copied into the kernel cmdline string as the following::
+
+ root="01234567-89ab-cdef-0123-456789abcd" -- splash
+
+If user gives some other command line like,::
+
+ ro bootconfig -- quiet
+
+The final kernel cmdline will be the following::
+
+ root="01234567-89ab-cdef-0123-456789abcd" ro bootconfig -- splash quiet
+
+
 Config File Limitation
 ======================
 
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 828d11441ebf..91ba391f9b32 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1758,6 +1758,11 @@
 			support for the idxd driver. By default it is set to
 			true (1).
 
+	idxd.tc_override= [HW]
+			Format: <bool>
+			Allow override of default traffic class configuration
+			for the device. By default it is set to false (0).
+
 	ieee754=	[MIPS] Select IEEE Std 754 conformance mode
 			Format: { strict | legacy | 2008 | relaxed }
 			Default: strict
diff --git a/Documentation/admin-guide/mm/damon/index.rst b/Documentation/admin-guide/mm/damon/index.rst
new file mode 100644
index 000000000000..8c5dde3a5754
--- /dev/null
+++ b/Documentation/admin-guide/mm/damon/index.rst
@@ -0,0 +1,15 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================
+Monitoring Data Accesses
+========================
+
+:doc:`DAMON </vm/damon/index>` allows light-weight data access monitoring.
+Using DAMON, users can analyze the memory access patterns of their systems and
+optimize those.
+
+.. toctree::
+   :maxdepth: 2
+
+   start
+   usage
diff --git a/Documentation/admin-guide/mm/damon/start.rst b/Documentation/admin-guide/mm/damon/start.rst
new file mode 100644
index 000000000000..d5eb89a8fc38
--- /dev/null
+++ b/Documentation/admin-guide/mm/damon/start.rst
@@ -0,0 +1,114 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Getting Started
+===============
+
+This document briefly describes how you can use DAMON by demonstrating its
+default user space tool.  Please note that this document describes only a part
+of its features for brevity.  Please refer to :doc:`usage` for more details.
+
+
+TL; DR
+======
+
+Follow the commands below to monitor and visualize the memory access pattern of
+your workload. ::
+
+    # # build the kernel with CONFIG_DAMON_*=y, install it, and reboot
+    # mount -t debugfs none /sys/kernel/debug/
+    # git clone https://github.com/awslabs/damo
+    # ./damo/damo record $(pidof <your workload>)
+    # ./damo/damo report heat --plot_ascii
+
+The final command draws the access heatmap of ``<your workload>``.  The heatmap
+shows which memory region (x-axis) is accessed when (y-axis) and how frequently
+(number; the higher the more accesses have been observed). ::
+
+    111111111111111111111111111111111111111111111111111111110000
+    111121111111111111111111111111211111111111111111111111110000
+    000000000000000000000000000000000000000000000000001555552000
+    000000000000000000000000000000000000000000000222223555552000
+    000000000000000000000000000000000000000011111677775000000000
+    000000000000000000000000000000000000000488888000000000000000
+    000000000000000000000000000000000177888400000000000000000000
+    000000000000000000000000000046666522222100000000000000000000
+    000000000000000000000014444344444300000000000000000000000000
+    000000000000000002222245555510000000000000000000000000000000
+    # access_frequency:  0  1  2  3  4  5  6  7  8  9
+    # x-axis: space (140286319947776-140286426374096: 101.496 MiB)
+    # y-axis: time (605442256436361-605479951866441: 37.695430s)
+    # resolution: 60x10 (1.692 MiB and 3.770s for each character)
+
+
+Prerequisites
+=============
+
+Kernel
+------
+
+You should first ensure your system is running on a kernel built with
+``CONFIG_DAMON_*=y``.
+
+
+User Space Tool
+---------------
+
+For the demonstration, we will use the default user space tool for DAMON,
+called DAMON Operator (DAMO).  It is available at
+https://github.com/awslabs/damo.  The examples below assume that ``damo`` is on
+your ``$PATH``.  It's not mandatory, though.
+
+Because DAMO is using the debugfs interface (refer to :doc:`usage` for the
+detail) of DAMON, you should ensure debugfs is mounted.  Mount it manually as
+below::
+
+    # mount -t debugfs none /sys/kernel/debug/
+
+or append the following line to your ``/etc/fstab`` file so that your system
+can automatically mount debugfs upon booting::
+
+    debugfs /sys/kernel/debug debugfs defaults 0 0
+
+
+Recording Data Access Patterns
+==============================
+
+The commands below record the memory access patterns of a program and save the
+monitoring results to a file. ::
+
+    $ git clone https://github.com/sjp38/masim
+    $ cd masim; make; ./masim ./configs/zigzag.cfg &
+    $ sudo damo record -o damon.data $(pidof masim)
+
+The first two lines of the commands download an artificial memory access
+generator program and run it in the background.  The generator will repeatedly
+access two 100 MiB sized memory regions one by one.  You can substitute this
+with your real workload.  The last line asks ``damo`` to record the access
+pattern in the ``damon.data`` file.
+
+
+Visualizing Recorded Patterns
+=============================
+
+The following three commands visualize the recorded access patterns and save
+the results as separate image files. ::
+
+    $ damo report heats --heatmap access_pattern_heatmap.png
+    $ damo report wss --range 0 101 1 --plot wss_dist.png
+    $ damo report wss --range 0 101 1 --sortby time --plot wss_chron_change.png
+
+- ``access_pattern_heatmap.png`` will visualize the data access pattern in a
+  heatmap, showing which memory region (y-axis) got accessed when (x-axis)
+  and how frequently (color).
+- ``wss_dist.png`` will show the distribution of the working set size.
+- ``wss_chron_change.png`` will show how the working set size has
+  chronologically changed.
+
+You can view the visualizations of this example workload at [1]_.
+Visualizations of other realistic workloads are available at [2]_ [3]_ [4]_.
+
+.. [1] https://damonitor.github.io/doc/html/v17/admin-guide/mm/damon/start.html#visualizing-recorded-patterns
+.. [2] https://damonitor.github.io/test/result/visual/latest/rec.heatmap.1.png.html
+.. [3] https://damonitor.github.io/test/result/visual/latest/rec.wss_sz.png.html
+.. [4] https://damonitor.github.io/test/result/visual/latest/rec.wss_time.png.html
diff --git a/Documentation/admin-guide/mm/damon/usage.rst b/Documentation/admin-guide/mm/damon/usage.rst
new file mode 100644
index 000000000000..a72cda374aba
--- /dev/null
+++ b/Documentation/admin-guide/mm/damon/usage.rst
@@ -0,0 +1,112 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============
+Detailed Usages
+===============
+
+DAMON provides below three interfaces for different users.
+
+- *DAMON user space tool.*
+  This is for privileged people such as system administrators who want a
+  just-working human-friendly interface.  Using this, users can use the DAMON’s
+  major features in a human-friendly way.  It may not be highly tuned for
+  special cases, though.  It supports only virtual address spaces monitoring.
+- *debugfs interface.*
+  This is for privileged user space programmers who want more optimized use of
+  DAMON.  Using this, users can use DAMON’s major features by reading
+  from and writing to special debugfs files.  Therefore, you can write and use
+  your personalized DAMON debugfs wrapper programs that reads/writes the
+  debugfs files instead of you.  The DAMON user space tool is also a reference
+  implementation of such programs.  It supports only virtual address spaces
+  monitoring.
+- *Kernel Space Programming Interface.*
+  This is for kernel space programmers.  Using this, users can utilize every
+  feature of DAMON most flexibly and efficiently by writing kernel space
+  DAMON application programs for you.  You can even extend DAMON for various
+  address spaces.
+
+Nevertheless, you could write your own user space tool using the debugfs
+interface.  A reference implementation is available at
+https://github.com/awslabs/damo.  If you are a kernel programmer, you could
+refer to :doc:`/vm/damon/api` for the kernel space programming interface.  For
+the reason, this document describes only the debugfs interface
+
+debugfs Interface
+=================
+
+DAMON exports three files, ``attrs``, ``target_ids``, and ``monitor_on`` under
+its debugfs directory, ``<debugfs>/damon/``.
+
+
+Attributes
+----------
+
+Users can get and set the ``sampling interval``, ``aggregation interval``,
+``regions update interval``, and min/max number of monitoring target regions by
+reading from and writing to the ``attrs`` file.  To know about the monitoring
+attributes in detail, please refer to the :doc:`/vm/damon/design`.  For
+example, below commands set those values to 5 ms, 100 ms, 1,000 ms, 10 and
+1000, and then check it again::
+
+    # cd <debugfs>/damon
+    # echo 5000 100000 1000000 10 1000 > attrs
+    # cat attrs
+    5000 100000 1000000 10 1000
+
+
+Target IDs
+----------
+
+Some types of address spaces supports multiple monitoring target.  For example,
+the virtual memory address spaces monitoring can have multiple processes as the
+monitoring targets.  Users can set the targets by writing relevant id values of
+the targets to, and get the ids of the current targets by reading from the
+``target_ids`` file.  In case of the virtual address spaces monitoring, the
+values should be pids of the monitoring target processes.  For example, below
+commands set processes having pids 42 and 4242 as the monitoring targets and
+check it again::
+
+    # cd <debugfs>/damon
+    # echo 42 4242 > target_ids
+    # cat target_ids
+    42 4242
+
+Note that setting the target ids doesn't start the monitoring.
+
+
+Turning On/Off
+--------------
+
+Setting the files as described above doesn't incur effect unless you explicitly
+start the monitoring.  You can start, stop, and check the current status of the
+monitoring by writing to and reading from the ``monitor_on`` file.  Writing
+``on`` to the file starts the monitoring of the targets with the attributes.
+Writing ``off`` to the file stops those.  DAMON also stops if every target
+process is terminated.  Below example commands turn on, off, and check the
+status of DAMON::
+
+    # cd <debugfs>/damon
+    # echo on > monitor_on
+    # echo off > monitor_on
+    # cat monitor_on
+    off
+
+Please note that you cannot write to the above-mentioned debugfs files while
+the monitoring is turned on.  If you write to the files while DAMON is running,
+an error code such as ``-EBUSY`` will be returned.
+
+
+Tracepoint for Monitoring Results
+=================================
+
+DAMON provides the monitoring results via a tracepoint,
+``damon:damon_aggregated``.  While the monitoring is turned on, you could
+record the tracepoint events and show results using tracepoint supporting tools
+like ``perf``.  For example::
+
+    # echo on > monitor_on
+    # perf record -e damon:damon_aggregated &
+    # sleep 5
+    # kill 9 $(pidof perf)
+    # echo off > monitor_on
+    # perf script
diff --git a/Documentation/admin-guide/mm/index.rst b/Documentation/admin-guide/mm/index.rst
index 4b14d8b50e9e..cbd19d5e625f 100644
--- a/Documentation/admin-guide/mm/index.rst
+++ b/Documentation/admin-guide/mm/index.rst
@@ -27,6 +27,7 @@ the Linux memory management.
 
    concepts
    cma_debugfs
+   damon/index
    hugetlbpage
    idle_page_tracking
    ksm
diff --git a/Documentation/admin-guide/mm/memory-hotplug.rst b/Documentation/admin-guide/mm/memory-hotplug.rst
index c6bae2d77160..03dfbc925252 100644
--- a/Documentation/admin-guide/mm/memory-hotplug.rst
+++ b/Documentation/admin-guide/mm/memory-hotplug.rst
@@ -1,466 +1,576 @@
 .. _admin_guide_memory_hotplug:
 
-==============
-Memory Hotplug
-==============
+==================
+Memory Hot(Un)Plug
+==================
 
-:Created:							Jul 28 2007
-:Updated: Add some details about locking internals:		Aug 20 2018
-
-This document is about memory hotplug including how-to-use and current status.
-Because Memory Hotplug is still under development, contents of this text will
-be changed often.
+This document describes generic Linux support for memory hot(un)plug with
+a focus on System RAM, including ZONE_MOVABLE support.
 
 .. contents:: :local:
 
-.. note::
+Introduction
+============
 
-    (1) x86_64's has special implementation for memory hotplug.
-        This text does not describe it.
-    (2) This text assumes that sysfs is mounted at ``/sys``.
+Memory hot(un)plug allows for increasing and decreasing the size of physical
+memory available to a machine at runtime. In the simplest case, it consists of
+physically plugging or unplugging a DIMM at runtime, coordinated with the
+operating system.
 
+Memory hot(un)plug is used for various purposes:
 
-Introduction
-============
+- The physical memory available to a machine can be adjusted at runtime, up- or
+  downgrading the memory capacity. This dynamic memory resizing, sometimes
+  referred to as "capacity on demand", is frequently used with virtual machines
+  and logical partitions.
+
+- Replacing hardware, such as DIMMs or whole NUMA nodes, without downtime. One
+  example is replacing failing memory modules.
 
-Purpose of memory hotplug
--------------------------
+- Reducing energy consumption either by physically unplugging memory modules or
+  by logically unplugging (parts of) memory modules from Linux.
 
-Memory Hotplug allows users to increase/decrease the amount of memory.
-Generally, there are two purposes.
+Further, the basic memory hot(un)plug infrastructure in Linux is nowadays also
+used to expose persistent memory, other performance-differentiated memory and
+reserved memory regions as ordinary system RAM to Linux.
 
-(A) For changing the amount of memory.
-    This is to allow a feature like capacity on demand.
-(B) For installing/removing DIMMs or NUMA-nodes physically.
-    This is to exchange DIMMs/NUMA-nodes, reduce power consumption, etc.
+Linux only supports memory hot(un)plug on selected 64 bit architectures, such as
+x86_64, arm64, ppc64, s390x and ia64.
 
-(A) is required by highly virtualized environments and (B) is required by
-hardware which supports memory power management.
+Memory Hot(Un)Plug Granularity
+------------------------------
 
-Linux memory hotplug is designed for both purpose.
+Memory hot(un)plug in Linux uses the SPARSEMEM memory model, which divides the
+physical memory address space into chunks of the same size: memory sections. The
+size of a memory section is architecture dependent. For example, x86_64 uses
+128 MiB and ppc64 uses 16 MiB.
 
-Phases of memory hotplug
+Memory sections are combined into chunks referred to as "memory blocks". The
+size of a memory block is architecture dependent and corresponds to the smallest
+granularity that can be hot(un)plugged. The default size of a memory block is
+the same as memory section size, unless an architecture specifies otherwise.
+
+All memory blocks have the same size.
+
+Phases of Memory Hotplug
 ------------------------
 
-There are 2 phases in Memory Hotplug:
+Memory hotplug consists of two phases:
 
-  1) Physical Memory Hotplug phase
-  2) Logical Memory Hotplug phase.
+(1) Adding the memory to Linux
+(2) Onlining memory blocks
 
-The First phase is to communicate hardware/firmware and make/erase
-environment for hotplugged memory. Basically, this phase is necessary
-for the purpose (B), but this is good phase for communication between
-highly virtualized environments too.
+In the first phase, metadata, such as the memory map ("memmap") and page tables
+for the direct mapping, is allocated and initialized, and memory blocks are
+created; the latter also creates sysfs files for managing newly created memory
+blocks.
 
-When memory is hotplugged, the kernel recognizes new memory, makes new memory
-management tables, and makes sysfs files for new memory's operation.
+In the second phase, added memory is exposed to the page allocator. After this
+phase, the memory is visible in memory statistics, such as free and total
+memory, of the system.
 
-If firmware supports notification of connection of new memory to OS,
-this phase is triggered automatically. ACPI can notify this event. If not,
-"probe" operation by system administration is used instead.
-(see :ref:`memory_hotplug_physical_mem`).
+Phases of Memory Hotunplug
+--------------------------
 
-Logical Memory Hotplug phase is to change memory state into
-available/unavailable for users. Amount of memory from user's view is
-changed by this phase. The kernel makes all memory in it as free pages
-when a memory range is available.
+Memory hotunplug consists of two phases:
 
-In this document, this phase is described as online/offline.
+(1) Offlining memory blocks
+(2) Removing the memory from Linux
 
-Logical Memory Hotplug phase is triggered by write of sysfs file by system
-administrator. For the hot-add case, it must be executed after Physical Hotplug
-phase by hand.
-(However, if you writes udev's hotplug scripts for memory hotplug, these
-phases can be execute in seamless way.)
+In the fist phase, memory is "hidden" from the page allocator again, for
+example, by migrating busy memory to other memory locations and removing all
+relevant free pages from the page allocator After this phase, the memory is no
+longer visible in memory statistics of the system.
 
-Unit of Memory online/offline operation
----------------------------------------
+In the second phase, the memory blocks are removed and metadata is freed.
 
-Memory hotplug uses SPARSEMEM memory model which allows memory to be divided
-into chunks of the same size. These chunks are called "sections". The size of
-a memory section is architecture dependent. For example, power uses 16MiB, ia64
-uses 1GiB.
+Memory Hotplug Notifications
+============================
 
-Memory sections are combined into chunks referred to as "memory blocks". The
-size of a memory block is architecture dependent and represents the logical
-unit upon which memory online/offline operations are to be performed. The
-default size of a memory block is the same as memory section size unless an
-architecture specifies otherwise. (see :ref:`memory_hotplug_sysfs_files`.)
+There are various ways how Linux is notified about memory hotplug events such
+that it can start adding hotplugged memory. This description is limited to
+systems that support ACPI; mechanisms specific to other firmware interfaces or
+virtual machines are not described.
 
-To determine the size (in bytes) of a memory block please read this file::
+ACPI Notifications
+------------------
 
-  /sys/devices/system/memory/block_size_bytes
+Platforms that support ACPI, such as x86_64, can support memory hotplug
+notifications via ACPI.
 
-Kernel Configuration
-====================
+In general, a firmware supporting memory hotplug defines a memory class object
+HID "PNP0C80". When notified about hotplug of a new memory device, the ACPI
+driver will hotplug the memory to Linux.
 
-To use memory hotplug feature, kernel must be compiled with following
-config options.
+If the firmware supports hotplug of NUMA nodes, it defines an object _HID
+"ACPI0004", "PNP0A05", or "PNP0A06". When notified about an hotplug event, all
+assigned memory devices are added to Linux by the ACPI driver.
 
-- For all memory hotplug:
-    - Memory model -> Sparse Memory  (``CONFIG_SPARSEMEM``)
-    - Allow for memory hot-add       (``CONFIG_MEMORY_HOTPLUG``)
+Similarly, Linux can be notified about requests to hotunplug a memory device or
+a NUMA node via ACPI. The ACPI driver will try offlining all relevant memory
+blocks, and, if successful, hotunplug the memory from Linux.
 
-- To enable memory removal, the following are also necessary:
-    - Allow for memory hot remove    (``CONFIG_MEMORY_HOTREMOVE``)
-    - Page Migration                 (``CONFIG_MIGRATION``)
+Manual Probing
+--------------
 
-- For ACPI memory hotplug, the following are also necessary:
-    - Memory hotplug (under ACPI Support menu) (``CONFIG_ACPI_HOTPLUG_MEMORY``)
-    - This option can be kernel module.
+On some architectures, the firmware may not be able to notify the operating
+system about a memory hotplug event. Instead, the memory has to be manually
+probed from user space.
 
-- As a related configuration, if your box has a feature of NUMA-node hotplug
-  via ACPI, then this option is necessary too.
+The probe interface is located at::
 
-    - ACPI0004,PNP0A05 and PNP0A06 Container Driver (under ACPI Support menu)
-      (``CONFIG_ACPI_CONTAINER``).
+	/sys/devices/system/memory/probe
 
-     This option can be kernel module too.
+Only complete memory blocks can be probed. Individual memory blocks are probed
+by providing the physical start address of the memory block::
 
+	% echo addr > /sys/devices/system/memory/probe
 
-.. _memory_hotplug_sysfs_files:
+Which results in a memory block for the range [addr, addr + memory_block_size)
+being created.
 
-sysfs files for memory hotplug
-==============================
+.. note::
 
-All memory blocks have their device information in sysfs.  Each memory block
-is described under ``/sys/devices/system/memory`` as::
+  Using the probe interface is discouraged as it is easy to crash the kernel,
+  because Linux cannot validate user input; this interface might be removed in
+  the future.
 
-	/sys/devices/system/memory/memoryXXX
+Onlining and Offlining Memory Blocks
+====================================
 
-where XXX is the memory block id.
+After a memory block has been created, Linux has to be instructed to actually
+make use of that memory: the memory block has to be "online".
 
-For the memory block covered by the sysfs directory.  It is expected that all
-memory sections in this range are present and no memory holes exist in the
-range. Currently there is no way to determine if there is a memory hole, but
-the existence of one should not affect the hotplug capabilities of the memory
-block.
+Before a memory block can be removed, Linux has to stop using any memory part of
+the memory block: the memory block has to be "offlined".
 
-For example, assume 1GiB memory block size. A device for a memory starting at
-0x100000000 is ``/sys/device/system/memory/memory4``::
+The Linux kernel can be configured to automatically online added memory blocks
+and drivers automatically trigger offlining of memory blocks when trying
+hotunplug of memory. Memory blocks can only be removed once offlining succeeded
+and drivers may trigger offlining of memory blocks when attempting hotunplug of
+memory.
 
-	(0x100000000 / 1Gib = 4)
+Onlining Memory Blocks Manually
+-------------------------------
 
-This device covers address range [0x100000000 ... 0x140000000)
+If auto-onlining of memory blocks isn't enabled, user-space has to manually
+trigger onlining of memory blocks. Often, udev rules are used to automate this
+task in user space.
 
-Under each memory block, you can see 5 files:
+Onlining of a memory block can be triggered via::
 
-- ``/sys/devices/system/memory/memoryXXX/phys_index``
-- ``/sys/devices/system/memory/memoryXXX/phys_device``
-- ``/sys/devices/system/memory/memoryXXX/state``
-- ``/sys/devices/system/memory/memoryXXX/removable``
-- ``/sys/devices/system/memory/memoryXXX/valid_zones``
+	% echo online > /sys/devices/system/memory/memoryXXX/state
 
-=================== ============================================================
-``phys_index``      read-only and contains memory block id, same as XXX.
-``state``           read-write
+Or alternatively::
 
-                    - at read:  contains online/offline state of memory.
-                    - at write: user can specify "online_kernel",
+	% echo 1 > /sys/devices/system/memory/memoryXXX/online
 
-                    "online_movable", "online", "offline" command
-                    which will be performed on all sections in the block.
-``phys_device``	    read-only: legacy interface only ever used on s390x to
-		    expose the covered storage increment.
-``removable``	    read-only: legacy interface that indicated whether a memory
-		    block was likely to be offlineable or not.  Newer kernel
-		    versions return "1" if and only if the kernel supports
-		    memory offlining.
-``valid_zones``     read-only: designed to show by which zone memory provided by
-		    a memory block is managed, and to show by which zone memory
-		    provided by an offline memory block could be managed when
-		    onlining.
-
-		    The first column shows it`s default zone.
-
-		    "memory6/valid_zones: Normal Movable" shows this memoryblock
-		    can be onlined to ZONE_NORMAL by default and to ZONE_MOVABLE
-		    by online_movable.
-
-		    "memory7/valid_zones: Movable Normal" shows this memoryblock
-		    can be onlined to ZONE_MOVABLE by default and to ZONE_NORMAL
-		    by online_kernel.
-=================== ============================================================
+The kernel will select the target zone automatically, usually defaulting to
+``ZONE_NORMAL`` unless ``movablecore=1`` has been specified on the kernel
+command line or if the memory block would intersect the ZONE_MOVABLE already.
 
-.. note::
+One can explicitly request to associate an offline memory block with
+ZONE_MOVABLE by::
 
-  These directories/files appear after physical memory hotplug phase.
+	% echo online_movable > /sys/devices/system/memory/memoryXXX/state
 
-If CONFIG_NUMA is enabled the memoryXXX/ directories can also be accessed
-via symbolic links located in the ``/sys/devices/system/node/node*`` directories.
+Or one can explicitly request a kernel zone (usually ZONE_NORMAL) by::
 
-For example::
+	% echo online_kernel > /sys/devices/system/memory/memoryXXX/state
 
-	/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
+In any case, if onlining succeeds, the state of the memory block is changed to
+be "online". If it fails, the state of the memory block will remain unchanged
+and the above commands will fail.
 
-A backlink will also be created::
+Onlining Memory Blocks Automatically
+------------------------------------
 
-	/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+The kernel can be configured to try auto-onlining of newly added memory blocks.
+If this feature is disabled, the memory blocks will stay offline until
+explicitly onlined from user space.
 
-.. _memory_hotplug_physical_mem:
+The configured auto-online behavior can be observed via::
 
-Physical memory hot-add phase
-=============================
+	% cat /sys/devices/system/memory/auto_online_blocks
 
-Hardware(Firmware) Support
---------------------------
+Auto-onlining can be enabled by writing ``online``, ``online_kernel`` or
+``online_movable`` to that file, like::
 
-On x86_64/ia64 platform, memory hotplug by ACPI is supported.
+	% echo online > /sys/devices/system/memory/auto_online_blocks
 
-In general, the firmware (ACPI) which supports memory hotplug defines
-memory class object of _HID "PNP0C80". When a notify is asserted to PNP0C80,
-Linux's ACPI handler does hot-add memory to the system and calls a hotplug udev
-script. This will be done automatically.
+Modifying the auto-online behavior will only affect all subsequently added
+memory blocks only.
 
-But scripts for memory hotplug are not contained in generic udev package(now).
-You may have to write it by yourself or online/offline memory by hand.
-Please see :ref:`memory_hotplug_how_to_online_memory` and
-:ref:`memory_hotplug_how_to_offline_memory`.
+.. note::
 
-If firmware supports NUMA-node hotplug, and defines an object _HID "ACPI0004",
-"PNP0A05", or "PNP0A06", notification is asserted to it, and ACPI handler
-calls hotplug code for all of objects which are defined in it.
-If memory device is found, memory hotplug code will be called.
+  In corner cases, auto-onlining can fail. The kernel won't retry. Note that
+  auto-onlining is not expected to fail in default configurations.
 
-Notify memory hot-add event by hand
------------------------------------
+.. note::
 
-On some architectures, the firmware may not notify the kernel of a memory
-hotplug event.  Therefore, the memory "probe" interface is supported to
-explicitly notify the kernel.  This interface depends on
-CONFIG_ARCH_MEMORY_PROBE and can be configured on powerpc, sh, and x86
-if hotplug is supported, although for x86 this should be handled by ACPI
-notification.
+  DLPAR on ppc64 ignores the ``offline`` setting and will still online added
+  memory blocks; if onlining fails, memory blocks are removed again.
 
-Probe interface is located at::
+Offlining Memory Blocks
+-----------------------
 
-	/sys/devices/system/memory/probe
+In the current implementation, Linux's memory offlining will try migrating all
+movable pages off the affected memory block. As most kernel allocations, such as
+page tables, are unmovable, page migration can fail and, therefore, inhibit
+memory offlining from succeeding.
 
-You can tell the physical address of new memory to the kernel by::
+Having the memory provided by memory block managed by ZONE_MOVABLE significantly
+increases memory offlining reliability; still, memory offlining can fail in
+some corner cases.
 
-	% echo start_address_of_new_memory > /sys/devices/system/memory/probe
+Further, memory offlining might retry for a long time (or even forever), until
+aborted by the user.
 
-Then, [start_address_of_new_memory, start_address_of_new_memory +
-memory_block_size] memory range is hot-added. In this case, hotplug script is
-not called (in current implementation). You'll have to online memory by
-yourself.  Please see :ref:`memory_hotplug_how_to_online_memory`.
+Offlining of a memory block can be triggered via::
 
-Logical Memory hot-add phase
-============================
+	% echo offline > /sys/devices/system/memory/memoryXXX/state
 
-State of memory
----------------
+Or alternatively::
 
-To see (online/offline) state of a memory block, read 'state' file::
+	% echo 0 > /sys/devices/system/memory/memoryXXX/online
 
-	% cat /sys/device/system/memory/memoryXXX/state
+If offlining succeeds, the state of the memory block is changed to be "offline".
+If it fails, the state of the memory block will remain unchanged and the above
+commands will fail, for example, via::
 
+	bash: echo: write error: Device or resource busy
 
-- If the memory block is online, you'll read "online".
-- If the memory block is offline, you'll read "offline".
+or via::
 
+	bash: echo: write error: Invalid argument
 
-.. _memory_hotplug_how_to_online_memory:
+Observing the State of Memory Blocks
+------------------------------------
 
-How to online memory
---------------------
+The state (online/offline/going-offline) of a memory block can be observed
+either via::
 
-When the memory is hot-added, the kernel decides whether or not to "online"
-it according to the policy which can be read from "auto_online_blocks" file::
+	% cat /sys/device/system/memory/memoryXXX/state
 
-	% cat /sys/devices/system/memory/auto_online_blocks
+Or alternatively (1/0) via::
 
-The default depends on the CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel config
-option. If it is disabled the default is "offline" which means the newly added
-memory is not in a ready-to-use state and you have to "online" the newly added
-memory blocks manually. Automatic onlining can be requested by writing "online"
-to "auto_online_blocks" file::
+	% cat /sys/device/system/memory/memoryXXX/online
 
-	% echo online > /sys/devices/system/memory/auto_online_blocks
+For an online memory block, the managing zone can be observed via::
 
-This sets a global policy and impacts all memory blocks that will subsequently
-be hotplugged. Currently offline blocks keep their state. It is possible, under
-certain circumstances, that some memory blocks will be added but will fail to
-online. User space tools can check their "state" files
-(``/sys/devices/system/memory/memoryXXX/state``) and try to online them manually.
+	% cat /sys/device/system/memory/memoryXXX/valid_zones
 
-If the automatic onlining wasn't requested, failed, or some memory block was
-offlined it is possible to change the individual block's state by writing to the
-"state" file::
+Configuring Memory Hot(Un)Plug
+==============================
 
-	% echo online > /sys/devices/system/memory/memoryXXX/state
+There are various ways how system administrators can configure memory
+hot(un)plug and interact with memory blocks, especially, to online them.
 
-This onlining will not change the ZONE type of the target memory block,
-If the memory block doesn't belong to any zone an appropriate kernel zone
-(usually ZONE_NORMAL) will be used unless movable_node kernel command line
-option is specified when ZONE_MOVABLE will be used.
+Memory Hot(Un)Plug Configuration via Sysfs
+------------------------------------------
 
-You can explicitly request to associate it with ZONE_MOVABLE by::
+Some memory hot(un)plug properties can be configured or inspected via sysfs in::
 
-	% echo online_movable > /sys/devices/system/memory/memoryXXX/state
+	/sys/devices/system/memory/
 
-.. note:: current limit: this memory block must be adjacent to ZONE_MOVABLE
+The following files are currently defined:
 
-Or you can explicitly request a kernel zone (usually ZONE_NORMAL) by::
+====================== =========================================================
+``auto_online_blocks`` read-write: set or get the default state of new memory
+		       blocks; configure auto-onlining.
 
-	% echo online_kernel > /sys/devices/system/memory/memoryXXX/state
+		       The default value depends on the
+		       CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE kernel configuration
+		       option.
 
-.. note:: current limit: this memory block must be adjacent to ZONE_NORMAL
+		       See the ``state`` property of memory blocks for details.
+``block_size_bytes``   read-only: the size in bytes of a memory block.
+``probe``	       write-only: add (probe) selected memory blocks manually
+		       from user space by supplying the physical start address.
 
-An explicit zone onlining can fail (e.g. when the range is already within
-and existing and incompatible zone already).
+		       Availability depends on the CONFIG_ARCH_MEMORY_PROBE
+		       kernel configuration option.
+``uevent``	       read-write: generic udev file for device subsystems.
+====================== =========================================================
 
-After this, memory block XXX's state will be 'online' and the amount of
-available memory will be increased.
+.. note::
 
-This may be changed in future.
+  When the CONFIG_MEMORY_FAILURE kernel configuration option is enabled, two
+  additional files ``hard_offline_page`` and ``soft_offline_page`` are available
+  to trigger hwpoisoning of pages, for example, for testing purposes. Note that
+  this functionality is not really related to memory hot(un)plug or actual
+  offlining of memory blocks.
 
-Logical memory remove
-=====================
+Memory Block Configuration via Sysfs
+------------------------------------
 
-Memory offline and ZONE_MOVABLE
--------------------------------
+Each memory block is represented as a memory block device that can be
+onlined or offlined. All memory blocks have their device information located in
+sysfs. Each present memory block is listed under
+``/sys/devices/system/memory`` as::
 
-Memory offlining is more complicated than memory online. Because memory offline
-has to make the whole memory block be unused, memory offline can fail if
-the memory block includes memory which cannot be freed.
+	/sys/devices/system/memory/memoryXXX
 
-In general, memory offline can use 2 techniques.
+where XXX is the memory block id; the number of digits is variable.
 
-(1) reclaim and free all memory in the memory block.
-(2) migrate all pages in the memory block.
+A present memory block indicates that some memory in the range is present;
+however, a memory block might span memory holes. A memory block spanning memory
+holes cannot be offlined.
 
-In the current implementation, Linux's memory offline uses method (2), freeing
-all  pages in the memory block by page migration. But not all pages are
-migratable. Under current Linux, migratable pages are anonymous pages and
-page caches. For offlining a memory block by migration, the kernel has to
-guarantee that the memory block contains only migratable pages.
+For example, assume 1 GiB memory block size. A device for a memory starting at
+0x100000000 is ``/sys/device/system/memory/memory4``::
 
-Now, a boot option for making a memory block which consists of migratable pages
-is supported. By specifying "kernelcore=" or "movablecore=" boot option, you can
-create ZONE_MOVABLE...a zone which is just used for movable pages.
-(See also Documentation/admin-guide/kernel-parameters.rst)
+	(0x100000000 / 1Gib = 4)
 
-Assume the system has "TOTAL" amount of memory at boot time, this boot option
-creates ZONE_MOVABLE as following.
+This device covers address range [0x100000000 ... 0x140000000)
 
-1) When kernelcore=YYYY boot option is used,
-   Size of memory not for movable pages (not for offline) is YYYY.
-   Size of memory for movable pages (for offline) is TOTAL-YYYY.
+The following files are currently defined:
 
-2) When movablecore=ZZZZ boot option is used,
-   Size of memory not for movable pages (not for offline) is TOTAL - ZZZZ.
-   Size of memory for movable pages (for offline) is ZZZZ.
+=================== ============================================================
+``online``	    read-write: simplified interface to trigger onlining /
+		    offlining and to observe the state of a memory block.
+		    When onlining, the zone is selected automatically.
+``phys_device``	    read-only: legacy interface only ever used on s390x to
+		    expose the covered storage increment.
+``phys_index``	    read-only: the memory block id (XXX).
+``removable``	    read-only: legacy interface that indicated whether a memory
+		    block was likely to be offlineable or not. Nowadays, the
+		    kernel return ``1`` if and only if it supports memory
+		    offlining.
+``state``	    read-write: advanced interface to trigger onlining /
+		    offlining and to observe the state of a memory block.
+
+		    When writing, ``online``, ``offline``, ``online_kernel`` and
+		    ``online_movable`` are supported.
+
+		    ``online_movable`` specifies onlining to ZONE_MOVABLE.
+		    ``online_kernel`` specifies onlining to the default kernel
+		    zone for the memory block, such as ZONE_NORMAL.
+                    ``online`` let's the kernel select the zone automatically.
+
+		    When reading, ``online``, ``offline`` and ``going-offline``
+		    may be returned.
+``uevent``	    read-write: generic uevent file for devices.
+``valid_zones``     read-only: when a block is online, shows the zone it
+		    belongs to; when a block is offline, shows what zone will
+		    manage it when the block will be onlined.
+
+		    For online memory blocks, ``DMA``, ``DMA32``, ``Normal``,
+		    ``Movable`` and ``none`` may be returned. ``none`` indicates
+		    that memory provided by a memory block is managed by
+		    multiple zones or spans multiple nodes; such memory blocks
+		    cannot be offlined. ``Movable`` indicates ZONE_MOVABLE.
+		    Other values indicate a kernel zone.
+
+		    For offline memory blocks, the first column shows the
+		    zone the kernel would select when onlining the memory block
+		    right now without further specifying a zone.
+
+		    Availability depends on the CONFIG_MEMORY_HOTREMOVE
+		    kernel configuration option.
+=================== ============================================================
 
 .. note::
 
-   Unfortunately, there is no information to show which memory block belongs
-   to ZONE_MOVABLE. This is TBD.
+  If the CONFIG_NUMA kernel configuration option is enabled, the memoryXXX/
+  directories can also be accessed via symbolic links located in the
+  ``/sys/devices/system/node/node*`` directories.
+
+  For example::
+
+	/sys/devices/system/node/node0/memory9 -> ../../memory/memory9
+
+  A backlink will also be created::
+
+	/sys/devices/system/memory/memory9/node0 -> ../../node/node0
+
+Command Line Parameters
+-----------------------
+
+Some command line parameters affect memory hot(un)plug handling. The following
+command line parameters are relevant:
+
+======================== =======================================================
+``memhp_default_state``	 configure auto-onlining by essentially setting
+                         ``/sys/devices/system/memory/auto_online_blocks``.
+``movablecore``		 configure automatic zone selection of the kernel. When
+			 set, the kernel will default to ZONE_MOVABLE, unless
+			 other zones can be kept contiguous.
+======================== =======================================================
+
+Module Parameters
+------------------
 
-   Memory offlining can fail when dissolving a free huge page on ZONE_MOVABLE
-   and the feature of freeing unused vmemmap pages associated with each hugetlb
-   page is enabled.
+Instead of additional command line parameters or sysfs files, the
+``memory_hotplug`` subsystem now provides a dedicated namespace for module
+parameters. Module parameters can be set via the command line by predicating
+them with ``memory_hotplug.`` such as::
+
+	memory_hotplug.memmap_on_memory=1
+
+and they can be observed (and some even modified at runtime) via::
+
+	/sys/modules/memory_hotplug/parameters/
+
+The following module parameters are currently defined:
+
+======================== =======================================================
+``memmap_on_memory``	 read-write: Allocate memory for the memmap from the
+			 added memory block itself. Even if enabled, actual
+			 support depends on various other system properties and
+			 should only be regarded as a hint whether the behavior
+			 would be desired.
+
+			 While allocating the memmap from the memory block
+			 itself makes memory hotplug less likely to fail and
+			 keeps the memmap on the same NUMA node in any case, it
+			 can fragment physical memory in a way that huge pages
+			 in bigger granularity cannot be formed on hotplugged
+			 memory.
+======================== =======================================================
+
+ZONE_MOVABLE
+============
+
+ZONE_MOVABLE is an important mechanism for more reliable memory offlining.
+Further, having system RAM managed by ZONE_MOVABLE instead of one of the
+kernel zones can increase the number of possible transparent huge pages and
+dynamically allocated huge pages.
+
+Most kernel allocations are unmovable. Important examples include the memory
+map (usually 1/64ths of memory), page tables, and kmalloc(). Such allocations
+can only be served from the kernel zones.
+
+Most user space pages, such as anonymous memory, and page cache pages are
+movable. Such allocations can be served from ZONE_MOVABLE and the kernel zones.
+
+Only movable allocations are served from ZONE_MOVABLE, resulting in unmovable
+allocations being limited to the kernel zones. Without ZONE_MOVABLE, there is
+absolutely no guarantee whether a memory block can be offlined successfully.
+
+Zone Imbalances
+---------------
 
-   This can happen when we have plenty of ZONE_MOVABLE memory, but not enough
-   kernel memory to allocate vmemmmap pages.  We may even be able to migrate
-   huge page contents, but will not be able to dissolve the source huge page.
-   This will prevent an offline operation and is unfortunate as memory offlining
-   is expected to succeed on movable zones.  Users that depend on memory hotplug
-   to succeed for movable zones should carefully consider whether the memory
-   savings gained from this feature are worth the risk of possibly not being
-   able to offline memory in certain situations.
+Having too much system RAM managed by ZONE_MOVABLE is called a zone imbalance,
+which can harm the system or degrade performance. As one example, the kernel
+might crash because it runs out of free memory for unmovable allocations,
+although there is still plenty of free memory left in ZONE_MOVABLE.
+
+Usually, MOVABLE:KERNEL ratios of up to 3:1 or even 4:1 are fine. Ratios of 63:1
+are definitely impossible due to the overhead for the memory map.
+
+Actual safe zone ratios depend on the workload. Extreme cases, like excessive
+long-term pinning of pages, might not be able to deal with ZONE_MOVABLE at all.
 
 .. note::
-   Techniques that rely on long-term pinnings of memory (especially, RDMA and
-   vfio) are fundamentally problematic with ZONE_MOVABLE and, therefore, memory
-   hot remove. Pinned pages cannot reside on ZONE_MOVABLE, to guarantee that
-   memory can still get hot removed - be aware that pinning can fail even if
-   there is plenty of free memory in ZONE_MOVABLE. In addition, using
-   ZONE_MOVABLE might make page pinning more expensive, because pages have to be
-   migrated off that zone first.
 
-.. _memory_hotplug_how_to_offline_memory:
+  CMA memory part of a kernel zone essentially behaves like memory in
+  ZONE_MOVABLE and similar considerations apply, especially when combining
+  CMA with ZONE_MOVABLE.
 
-How to offline memory
----------------------
+ZONE_MOVABLE Sizing Considerations
+----------------------------------
 
-You can offline a memory block by using the same sysfs interface that was used
-in memory onlining::
+We usually expect that a large portion of available system RAM will actually
+be consumed by user space, either directly or indirectly via the page cache. In
+the normal case, ZONE_MOVABLE can be used when allocating such pages just fine.
 
-	% echo offline > /sys/devices/system/memory/memoryXXX/state
+With that in mind, it makes sense that we can have a big portion of system RAM
+managed by ZONE_MOVABLE. However, there are some things to consider when using
+ZONE_MOVABLE, especially when fine-tuning zone ratios:
+
+- Having a lot of offline memory blocks. Even offline memory blocks consume
+  memory for metadata and page tables in the direct map; having a lot of offline
+  memory blocks is not a typical case, though.
+
+- Memory ballooning without balloon compaction is incompatible with
+  ZONE_MOVABLE. Only some implementations, such as virtio-balloon and
+  pseries CMM, fully support balloon compaction.
+
+  Further, the CONFIG_BALLOON_COMPACTION kernel configuration option might be
+  disabled. In that case, balloon inflation will only perform unmovable
+  allocations and silently create a zone imbalance, usually triggered by
+  inflation requests from the hypervisor.
+
+- Gigantic pages are unmovable, resulting in user space consuming a
+  lot of unmovable memory.
+
+- Huge pages are unmovable when an architectures does not support huge
+  page migration, resulting in a similar issue as with gigantic pages.
+
+- Page tables are unmovable. Excessive swapping, mapping extremely large
+  files or ZONE_DEVICE memory can be problematic, although only really relevant
+  in corner cases. When we manage a lot of user space memory that has been
+  swapped out or is served from a file/persistent memory/... we still need a lot
+  of page tables to manage that memory once user space accessed that memory.
+
+- In certain DAX configurations the memory map for the device memory will be
+  allocated from the kernel zones.
+
+- KASAN can have a significant memory overhead, for example, consuming 1/8th of
+  the total system memory size as (unmovable) tracking metadata.
+
+- Long-term pinning of pages. Techniques that rely on long-term pinnings
+  (especially, RDMA and vfio/mdev) are fundamentally problematic with
+  ZONE_MOVABLE, and therefore, memory offlining. Pinned pages cannot reside
+  on ZONE_MOVABLE as that would turn these pages unmovable. Therefore, they
+  have to be migrated off that zone while pinning. Pinning a page can fail
+  even if there is plenty of free memory in ZONE_MOVABLE.
+
+  In addition, using ZONE_MOVABLE might make page pinning more expensive,
+  because of the page migration overhead.
+
+By default, all the memory configured at boot time is managed by the kernel
+zones and ZONE_MOVABLE is not used.
+
+To enable ZONE_MOVABLE to include the memory present at boot and to control the
+ratio between movable and kernel zones there are two command line options:
+``kernelcore=`` and ``movablecore=``. See
+Documentation/admin-guide/kernel-parameters.rst for their description.
+
+Memory Offlining and ZONE_MOVABLE
+---------------------------------
+
+Even with ZONE_MOVABLE, there are some corner cases where offlining a memory
+block might fail:
+
+- Memory blocks with memory holes; this applies to memory blocks present during
+  boot and can apply to memory blocks hotplugged via the XEN balloon and the
+  Hyper-V balloon.
+
+- Mixed NUMA nodes and mixed zones within a single memory block prevent memory
+  offlining; this applies to memory blocks present during boot only.
+
+- Special memory blocks prevented by the system from getting offlined. Examples
+  include any memory available during boot on arm64 or memory blocks spanning
+  the crashkernel area on s390x; this usually applies to memory blocks present
+  during boot only.
+
+- Memory blocks overlapping with CMA areas cannot be offlined, this applies to
+  memory blocks present during boot only.
+
+- Concurrent activity that operates on the same physical memory area, such as
+  allocating gigantic pages, can result in temporary offlining failures.
+
+- Out of memory when dissolving huge pages, especially when freeing unused
+  vmemmap pages associated with each hugetlb page is enabled.
+
+  Offlining code may be able to migrate huge page contents, but may not be able
+  to dissolve the source huge page because it fails allocating (unmovable) pages
+  for the vmemmap, because the system might not have free memory in the kernel
+  zones left.
+
+  Users that depend on memory offlining to succeed for movable zones should
+  carefully consider whether the memory savings gained from this feature are
+  worth the risk of possibly not being able to offline memory in certain
+  situations.
+
+Further, when running into out of memory situations while migrating pages, or
+when still encountering permanently unmovable pages within ZONE_MOVABLE
+(-> BUG), memory offlining will keep retrying until it eventually succeeds.
+
+When offlining is triggered from user space, the offlining context can be
+terminated by sending a fatal signal. A timeout based offlining can easily be
+implemented via::
 
-If offline succeeds, the state of the memory block is changed to be "offline".
-If it fails, some error core (like -EBUSY) will be returned by the kernel.
-Even if a memory block does not belong to ZONE_MOVABLE, you can try to offline
-it.  If it doesn't contain 'unmovable' memory, you'll get success.
-
-A memory block under ZONE_MOVABLE is considered to be able to be offlined
-easily.  But under some busy state, it may return -EBUSY. Even if a memory
-block cannot be offlined due to -EBUSY, you can retry offlining it and may be
-able to offline it (or not). (For example, a page is referred to by some kernel
-internal call and released soon.)
-
-Consideration:
-  Memory hotplug's design direction is to make the possibility of memory
-  offlining higher and to guarantee unplugging memory under any situation. But
-  it needs more work. Returning -EBUSY under some situation may be good because
-  the user can decide to retry more or not by himself. Currently, memory
-  offlining code does some amount of retry with 120 seconds timeout.
-
-Physical memory remove
-======================
-
-Need more implementation yet....
- - Notification completion of remove works by OS to firmware.
- - Guard from remove if not yet.
-
-
-Locking Internals
-=================
-
-When adding/removing memory that uses memory block devices (i.e. ordinary RAM),
-the device_hotplug_lock should be held to:
-
-- synchronize against online/offline requests (e.g. via sysfs). This way, memory
-  block devices can only be accessed (.online/.state attributes) by user
-  space once memory has been fully added. And when removing memory, we
-  know nobody is in critical sections.
-- synchronize against CPU hotplug and similar (e.g. relevant for ACPI and PPC)
-
-Especially, there is a possible lock inversion that is avoided using
-device_hotplug_lock when adding memory and user space tries to online that
-memory faster than expected:
-
-- device_online() will first take the device_lock(), followed by
-  mem_hotplug_lock
-- add_memory_resource() will first take the mem_hotplug_lock, followed by
-  the device_lock() (while creating the devices, during bus_add_device()).
-
-As the device is visible to user space before taking the device_lock(), this
-can result in a lock inversion.
-
-onlining/offlining of memory should be done via device_online()/
-device_offline() - to make sure it is properly synchronized to actions
-via sysfs. Holding device_hotplug_lock is advised (to e.g. protect online_type)
-
-When adding/removing/onlining/offlining memory or adding/removing
-heterogeneous/device memory, we should always hold the mem_hotplug_lock in
-write mode to serialise memory hotplug (e.g. access to global/zone
-variables).
-
-In addition, mem_hotplug_lock (in contrast to device_hotplug_lock) in read
-mode allows for a quite efficient get_online_mems/put_online_mems
-implementation, so code accessing memory can protect from that memory
-vanishing.
-
-
-Future Work
-===========
-
-  - allowing memory hot-add to ZONE_MOVABLE. maybe we need some switch like
-    sysctl or new control file.
-  - showing memory block and physical device relationship.
-  - test and make it better memory offlining.
-  - support HugeTLB page migration and offlining.
-  - memmap removing at memory offline.
-  - physical remove memory.
+	% timeout $TIMEOUT offline_block | failure_handling
diff --git a/Documentation/arm/marvell.rst b/Documentation/arm/marvell.rst
index 85169bc3f538..56bb592dbd0c 100644
--- a/Documentation/arm/marvell.rst
+++ b/Documentation/arm/marvell.rst
@@ -140,6 +140,7 @@ EBU Armada family
 	- 88F6821 Armada 382
 	- 88F6W21 Armada 383
 	- 88F6820 Armada 385
+	- 88F6825
 	- 88F6828 Armada 388
 
     - Product infos:   https://web.archive.org/web/20181006144616/http://www.marvell.com/embedded-processors/armada-38x/
diff --git a/Documentation/block/blk-mq.rst b/Documentation/block/blk-mq.rst
index d96118c73954..31f52f326971 100644
--- a/Documentation/block/blk-mq.rst
+++ b/Documentation/block/blk-mq.rst
@@ -54,7 +54,7 @@ layer or if we want to try to merge requests. In both cases, requests will be
 sent to the software queue.
 
 Then, after the requests are processed by software queues, they will be placed
-at the hardware queue, a second stage queue were the hardware has direct access
+at the hardware queue, a second stage queue where the hardware has direct access
 to process those requests. However, if the hardware does not have enough
 resources to accept more requests, blk-mq will places requests on a temporary
 queue, to be sent in the future, when the hardware is able.
diff --git a/Documentation/conf.py b/Documentation/conf.py
index 75650f6443af..948a97d6387d 100644
--- a/Documentation/conf.py
+++ b/Documentation/conf.py
@@ -463,8 +463,8 @@ latex_elements['preamble']  += '''
 	\\newcommand{\\kerneldocEndTC}{}
 	\\newcommand{\\kerneldocBeginKR}{}
 	\\newcommand{\\kerneldocEndKR}{}
-	\\newcommand{\\kerneldocBeginSC}{}
-	\\newcommand{\\kerneldocEndKR}{}
+	\\newcommand{\\kerneldocBeginJP}{}
+	\\newcommand{\\kerneldocEndJP}{}
     }
 '''
 
diff --git a/Documentation/core-api/kernel-api.rst b/Documentation/core-api/kernel-api.rst
index 2a7444e3a4c2..2e7186805148 100644
--- a/Documentation/core-api/kernel-api.rst
+++ b/Documentation/core-api/kernel-api.rst
@@ -315,6 +315,9 @@ Block Devices
 .. kernel-doc:: block/genhd.c
    :export:
 
+.. kernel-doc:: block/bdev.c
+   :export:
+
 Char devices
 ============
 
diff --git a/Documentation/cpu-freq/cpu-drivers.rst b/Documentation/cpu-freq/cpu-drivers.rst
index d84ededb66f9..3b32336a7803 100644
--- a/Documentation/cpu-freq/cpu-drivers.rst
+++ b/Documentation/cpu-freq/cpu-drivers.rst
@@ -75,9 +75,6 @@ And optionally
  .resume - A pointer to a per-policy resume function which is called
  with interrupts disabled and _before_ the governor is started again.
 
- .ready - A pointer to a per-policy ready function which is called after
- the policy is fully initialized.
-
  .attr - A pointer to a NULL-terminated list of "struct freq_attr" which
  allow to export values to sysfs.
 
diff --git a/Documentation/dev-tools/kfence.rst b/Documentation/dev-tools/kfence.rst
index fdf04e741ea5..0fbe3308bf37 100644
--- a/Documentation/dev-tools/kfence.rst
+++ b/Documentation/dev-tools/kfence.rst
@@ -65,25 +65,27 @@ Error reports
 A typical out-of-bounds access looks like this::
 
     ==================================================================
-    BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa3/0x22b
+    BUG: KFENCE: out-of-bounds read in test_out_of_bounds_read+0xa6/0x234
 
-    Out-of-bounds read at 0xffffffffb672efff (1B left of kfence-#17):
-     test_out_of_bounds_read+0xa3/0x22b
-     kunit_try_run_case+0x51/0x85
+    Out-of-bounds read at 0xffff8c3f2e291fff (1B left of kfence-#72):
+     test_out_of_bounds_read+0xa6/0x234
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    kfence-#17 [0xffffffffb672f000-0xffffffffb672f01f, size=32, cache=kmalloc-32] allocated by task 507:
-     test_alloc+0xf3/0x25b
-     test_out_of_bounds_read+0x98/0x22b
-     kunit_try_run_case+0x51/0x85
+    kfence-#72: 0xffff8c3f2e292000-0xffff8c3f2e29201f, size=32, cache=kmalloc-32
+
+    allocated by task 484 on cpu 0 at 32.919330s:
+     test_alloc+0xfe/0x738
+     test_out_of_bounds_read+0x9b/0x234
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    CPU: 4 PID: 107 Comm: kunit_try_catch Not tainted 5.8.0-rc6+ #7
-    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
+    CPU: 0 PID: 484 Comm: kunit_try_catch Not tainted 5.13.0-rc3+ #7
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
     ==================================================================
 
 The header of the report provides a short summary of the function involved in
@@ -96,30 +98,32 @@ Use-after-free accesses are reported as::
     ==================================================================
     BUG: KFENCE: use-after-free read in test_use_after_free_read+0xb3/0x143
 
-    Use-after-free read at 0xffffffffb673dfe0 (in kfence-#24):
+    Use-after-free read at 0xffff8c3f2e2a0000 (in kfence-#79):
      test_use_after_free_read+0xb3/0x143
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    kfence-#24 [0xffffffffb673dfe0-0xffffffffb673dfff, size=32, cache=kmalloc-32] allocated by task 507:
-     test_alloc+0xf3/0x25b
+    kfence-#79: 0xffff8c3f2e2a0000-0xffff8c3f2e2a001f, size=32, cache=kmalloc-32
+
+    allocated by task 488 on cpu 2 at 33.871326s:
+     test_alloc+0xfe/0x738
      test_use_after_free_read+0x76/0x143
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    freed by task 507:
+    freed by task 488 on cpu 2 at 33.871358s:
      test_use_after_free_read+0xa8/0x143
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    CPU: 4 PID: 109 Comm: kunit_try_catch Tainted: G        W         5.8.0-rc6+ #7
-    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
+    CPU: 2 PID: 488 Comm: kunit_try_catch Tainted: G    B             5.13.0-rc3+ #7
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
     ==================================================================
 
 KFENCE also reports on invalid frees, such as double-frees::
@@ -127,30 +131,32 @@ KFENCE also reports on invalid frees, such as double-frees::
     ==================================================================
     BUG: KFENCE: invalid free in test_double_free+0xdc/0x171
 
-    Invalid free of 0xffffffffb6741000:
+    Invalid free of 0xffff8c3f2e2a4000 (in kfence-#81):
      test_double_free+0xdc/0x171
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    kfence-#26 [0xffffffffb6741000-0xffffffffb674101f, size=32, cache=kmalloc-32] allocated by task 507:
-     test_alloc+0xf3/0x25b
+    kfence-#81: 0xffff8c3f2e2a4000-0xffff8c3f2e2a401f, size=32, cache=kmalloc-32
+
+    allocated by task 490 on cpu 1 at 34.175321s:
+     test_alloc+0xfe/0x738
      test_double_free+0x76/0x171
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    freed by task 507:
+    freed by task 490 on cpu 1 at 34.175348s:
      test_double_free+0xa8/0x171
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    CPU: 4 PID: 111 Comm: kunit_try_catch Tainted: G        W         5.8.0-rc6+ #7
-    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
+    CPU: 1 PID: 490 Comm: kunit_try_catch Tainted: G    B             5.13.0-rc3+ #7
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
     ==================================================================
 
 KFENCE also uses pattern-based redzones on the other side of an object's guard
@@ -160,23 +166,25 @@ These are reported on frees::
     ==================================================================
     BUG: KFENCE: memory corruption in test_kmalloc_aligned_oob_write+0xef/0x184
 
-    Corrupted memory at 0xffffffffb6797ff9 [ 0xac . . . . . . ] (in kfence-#69):
+    Corrupted memory at 0xffff8c3f2e33aff9 [ 0xac . . . . . . ] (in kfence-#156):
      test_kmalloc_aligned_oob_write+0xef/0x184
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    kfence-#69 [0xffffffffb6797fb0-0xffffffffb6797ff8, size=73, cache=kmalloc-96] allocated by task 507:
-     test_alloc+0xf3/0x25b
+    kfence-#156: 0xffff8c3f2e33afb0-0xffff8c3f2e33aff8, size=73, cache=kmalloc-96
+
+    allocated by task 502 on cpu 7 at 42.159302s:
+     test_alloc+0xfe/0x738
      test_kmalloc_aligned_oob_write+0x57/0x184
-     kunit_try_run_case+0x51/0x85
+     kunit_try_run_case+0x61/0xa0
      kunit_generic_run_threadfn_adapter+0x16/0x30
-     kthread+0x137/0x160
+     kthread+0x176/0x1b0
      ret_from_fork+0x22/0x30
 
-    CPU: 4 PID: 120 Comm: kunit_try_catch Tainted: G        W         5.8.0-rc6+ #7
-    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1 04/01/2014
+    CPU: 7 PID: 502 Comm: kunit_try_catch Tainted: G    B             5.13.0-rc3+ #7
+    Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
     ==================================================================
 
 For such errors, the address where the corruption occurred as well as the
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
index 56f442374383..1d7e49167666 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-dt.txt
@@ -11,7 +11,7 @@ Required properties:
 - None
 
 Optional properties:
-- operating-points: Refer to Documentation/devicetree/bindings/opp/opp.txt for
+- operating-points: Refer to Documentation/devicetree/bindings/opp/opp-v1.yaml for
   details. OPPs *must* be supplied either via DT, i.e. this property, or
   populated at runtime.
 - clock-latency: Specify the possible maximum transition latency for clock,
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
new file mode 100644
index 000000000000..9cd42a64b13e
--- /dev/null
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek-hw.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/cpufreq-mediatek-hw.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek's CPUFREQ Bindings
+
+maintainers:
+  - Hector Yuan <hector.yuan@mediatek.com>
+
+description:
+  CPUFREQ HW is a hardware engine used by MediaTek SoCs to
+  manage frequency in hardware. It is capable of controlling
+  frequency for multiple clusters.
+
+properties:
+  compatible:
+    const: mediatek,cpufreq-hw
+
+  reg:
+    minItems: 1
+    maxItems: 2
+    description:
+      Addresses and sizes for the memory of the HW bases in
+      each frequency domain. Each entry corresponds to
+      a register bank for each frequency domain present.
+
+  "#performance-domain-cells":
+    description:
+      Number of cells in a performance domain specifier.
+      Set const to 1 here for nodes providing multiple
+      performance domains.
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - "#performance-domain-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    cpus {
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            cpu0: cpu@0 {
+                device_type = "cpu";
+                compatible = "arm,cortex-a55";
+                enable-method = "psci";
+                performance-domains = <&performance 0>;
+                reg = <0x000>;
+            };
+    };
+
+    /* ... */
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        performance: performance-controller@11bc00 {
+            compatible = "mediatek,cpufreq-hw";
+            reg = <0 0x0011bc10 0 0x120>, <0 0x0011bd30 0 0x120>;
+
+            #performance-domain-cells = <1>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
index ef68711716fb..b8233ec91d3d 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-mediatek.txt
@@ -10,7 +10,7 @@ Required properties:
 			  transition and not stable yet.
 	Please refer to Documentation/devicetree/bindings/clock/clock-bindings.txt for
 	generic clock consumer properties.
-- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp.txt
+- operating-points-v2: Please refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
 	for detail.
 - proc-supply: Regulator for Vproc of CPU cluster.
 
diff --git a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
index d91a02a3b6b0..6b0b452acef0 100644
--- a/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
+++ b/Documentation/devicetree/bindings/cpufreq/cpufreq-st.txt
@@ -6,8 +6,6 @@ from the SoC, then supplies the OPP framework with 'prop' and 'supported
 hardware' information respectively.  The framework is then able to read
 the DT and operate in the usual way.
 
-For more information about the expected DT format [See: ../opp/opp.txt].
-
 Frequency Scaling only
 ----------------------
 
@@ -15,7 +13,7 @@ No vendor specific driver required for this.
 
 Located in CPU's node:
 
-- operating-points		: [See: ../power/opp.txt]
+- operating-points		: [See: ../power/opp-v1.yaml]
 
 Example [safe]
 --------------
@@ -37,7 +35,7 @@ This requires the ST CPUFreq driver to supply 'process' and 'version' info.
 
 Located in CPU's node:
 
-- operating-points-v2		: [See ../power/opp.txt]
+- operating-points-v2		: [See ../power/opp-v2.yaml]
 
 Example [unsafe]
 ----------------
diff --git a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
index 52a24b82fd86..bdbfd7c36101 100644
--- a/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
+++ b/Documentation/devicetree/bindings/cpufreq/nvidia,tegra20-cpufreq.txt
@@ -4,7 +4,7 @@ Binding for NVIDIA Tegra20 CPUFreq
 Required properties:
 - clocks: Must contain an entry for the CPU clock.
   See ../clocks/clock-bindings.txt for details.
-- operating-points-v2: See ../bindings/opp/opp.txt for details.
+- operating-points-v2: See ../bindings/opp/opp-v2.yaml for details.
 - #cooling-cells: Should be 2. See ../thermal/thermal-cooling-devices.yaml for details.
 
 For each opp entry in 'operating-points-v2' table:
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
index ac189dd82b08..3fbeb3733c48 100644
--- a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -8,7 +8,7 @@ Required properties:
 - clocks:		 Phandles for clock specified in "clock-names" property
 - clock-names :		 The name of clock used by the DFI, must be
 			 "pclk_ddr_mon";
-- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp.txt
+- operating-points-v2:	 Refer to Documentation/devicetree/bindings/opp/opp-v2.yaml
 			 for details.
 - center-supply:	 DMC supply node.
 - status:		 Marks the node enabled/disabled.
diff --git a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
index 4265399bb154..c851770bbdf2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
+++ b/Documentation/devicetree/bindings/display/msm/dsi-phy-7nm.yaml
@@ -14,10 +14,10 @@ allOf:
 
 properties:
   compatible:
-    oneOf:
-      - const: qcom,dsi-phy-7nm
-      - const: qcom,dsi-phy-7nm-8150
-      - const: qcom,sc7280-dsi-phy-7nm
+    enum:
+      - qcom,dsi-phy-7nm
+      - qcom,dsi-phy-7nm-8150
+      - qcom,sc7280-dsi-phy-7nm
 
   reg:
     items:
diff --git a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
index a4f9fe23dcd9..b193ee2db4a7 100644
--- a/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
+++ b/Documentation/devicetree/bindings/dma/altr,msgdma.yaml
@@ -24,13 +24,15 @@ properties:
     items:
       - description: Control and Status Register Slave Port
       - description: Descriptor Slave Port
-      - description: Response Slave Port
+      - description: Response Slave Port (Optional)
+    minItems: 2
 
   reg-names:
     items:
       - const: csr
       - const: desc
       - const: resp
+    minItems: 2
 
   interrupts:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
new file mode 100644
index 000000000000..7a4f415d74dc
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/renesas,rz-dmac.yaml
@@ -0,0 +1,130 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/dma/renesas,rz-dmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/G2L DMA Controller
+
+maintainers:
+  - Biju Das <biju.das.jz@bp.renesas.com>
+
+allOf:
+  - $ref: "dma-controller.yaml#"
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - renesas,r9a07g044-dmac # RZ/G2{L,LC}
+      - const: renesas,rz-dmac
+
+  reg:
+    items:
+      - description: Control and channel register block
+      - description: DMA extended resource selector block
+
+  interrupts:
+    maxItems: 17
+
+  interrupt-names:
+    items:
+      - const: error
+      - const: ch0
+      - const: ch1
+      - const: ch2
+      - const: ch3
+      - const: ch4
+      - const: ch5
+      - const: ch6
+      - const: ch7
+      - const: ch8
+      - const: ch9
+      - const: ch10
+      - const: ch11
+      - const: ch12
+      - const: ch13
+      - const: ch14
+      - const: ch15
+
+  clocks:
+    items:
+      - description: DMA main clock
+      - description: DMA register access clock
+
+  '#dma-cells':
+    const: 1
+    description:
+      The cell specifies the encoded MID/RID values of the DMAC port
+      connected to the DMA client and the slave channel configuration
+      parameters.
+      bits[0:9] - Specifies MID/RID value
+      bit[10] - Specifies DMA request high enable (HIEN)
+      bit[11] - Specifies DMA request detection type (LVL)
+      bits[12:14] - Specifies DMAACK output mode (AM)
+      bit[15] - Specifies Transfer Mode (TM)
+
+  dma-channels:
+    const: 16
+
+  power-domains:
+    maxItems: 1
+
+  resets:
+    items:
+      - description: Reset for DMA ARESETN reset terminal
+      - description: Reset for DMA RST_ASYNC reset terminal
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - '#dma-cells'
+  - dma-channels
+  - power-domains
+  - resets
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/r9a07g044-cpg.h>
+
+    dmac: dma-controller@11820000 {
+        compatible = "renesas,r9a07g044-dmac",
+                     "renesas,rz-dmac";
+        reg = <0x11820000 0x10000>,
+              <0x11830000 0x10000>;
+        interrupts = <GIC_SPI 141 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 125 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 126 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 127 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 128 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 129 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 130 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 132 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 133 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 134 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 135 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 136 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 137 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 138 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 139 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 140 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "error",
+                          "ch0", "ch1", "ch2", "ch3",
+                          "ch4", "ch5", "ch6", "ch7",
+                          "ch8", "ch9", "ch10", "ch11",
+                          "ch12", "ch13", "ch14", "ch15";
+        clocks = <&cpg CPG_MOD R9A07G044_DMAC_ACLK>,
+                 <&cpg CPG_MOD R9A07G044_DMAC_PCLK>;
+        power-domains = <&cpg>;
+        resets = <&cpg R9A07G044_DMAC_ARESETN>,
+                 <&cpg R9A07G044_DMAC_RST_ASYNC>;
+        #dma-cells = <1>;
+        dma-channels = <16>;
+    };
diff --git a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
index 2a5325f480f6..4bf676fd25dc 100644
--- a/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
+++ b/Documentation/devicetree/bindings/dma/st,stm32-dma.yaml
@@ -40,6 +40,13 @@ description: |
          0x0: FIFO mode with threshold selectable with bit 0-1
          0x1: Direct mode: each DMA request immediately initiates a transfer
               from/to the memory, FIFO is bypassed.
+       -bit 4: alternative DMA request/acknowledge protocol
+         0x0: Use standard DMA ACK management, where ACK signal is maintained
+              up to the removal of request and transfer completion
+         0x1: Use alternative DMA ACK management, where ACK de-assertion does
+              not wait for the de-assertion of the REQuest, ACK is only managed
+              by transfer completion. This must only be used on channels
+              managing transfers for STM32 USART/UART.
 
 
 maintainers:
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
index c5f6092a2855..6f98dd55fb4c 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-bifrost.yaml
@@ -137,7 +137,7 @@ examples:
       resets = <&reset 0>, <&reset 1>;
     };
 
-    gpu_opp_table: opp_table0 {
+    gpu_opp_table: opp-table {
       compatible = "operating-points-v2";
 
       opp-533000000 {
diff --git a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
index 696c17aedbbe..d209f272625d 100644
--- a/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
+++ b/Documentation/devicetree/bindings/gpu/arm,mali-midgard.yaml
@@ -160,7 +160,7 @@ examples:
       #cooling-cells = <2>;
     };
 
-    gpu_opp_table: opp_table0 {
+    gpu_opp_table: opp-table {
       compatible = "operating-points-v2";
 
       opp-533000000 {
diff --git a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
index cffd02028d02..d74f2002409e 100644
--- a/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
+++ b/Documentation/devicetree/bindings/input/allwinner,sun4i-a10-lradc-keys.yaml
@@ -29,6 +29,8 @@ properties:
     description:
       Regulator for the LRADC reference voltage
 
+  wakeup-source: true
+
 patternProperties:
   "^button-[0-9]+$":
     type: object
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
deleted file mode 100644
index 6cd08bca2c66..000000000000
--- a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-Qualcomm PM8941 PMIC Power Key
-
-PROPERTIES
-
-- compatible:
-	Usage: required
-	Value type: <string>
-	Definition: must be one of:
-		    "qcom,pm8941-pwrkey"
-		    "qcom,pm8941-resin"
-		    "qcom,pmk8350-pwrkey"
-		    "qcom,pmk8350-resin"
-
-- reg:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: base address of registers for block
-
-- interrupts:
-	Usage: required
-	Value type: <prop-encoded-array>
-	Definition: key change interrupt; The format of the specifier is
-		    defined by the binding document describing the node's
-		    interrupt parent.
-
-- debounce:
-	Usage: optional
-	Value type: <u32>
-	Definition: time in microseconds that key must be pressed or released
-		    for state change interrupt to trigger.
-
-- bias-pull-up:
-	Usage: optional
-	Value type: <empty>
-	Definition: presence of this property indicates that the KPDPWR_N pin
-		    should be configured for pull up.
-
-- linux,code:
-	Usage: optional
-	Value type: <u32>
-	Definition: The input key-code associated with the power key.
-		    Use the linux event codes defined in
-		    include/dt-bindings/input/linux-event-codes.h
-		    When property is omitted KEY_POWER is assumed.
-
-EXAMPLE
-
-	pwrkey@800 {
-		compatible = "qcom,pm8941-pwrkey";
-		reg = <0x800>;
-		interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-		debounce = <15625>;
-		bias-pull-up;
-		linux,code = <KEY_POWER>;
-	};
diff --git a/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
new file mode 100644
index 000000000000..62314a5fdce5
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/qcom,pm8941-pwrkey.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/qcom,pm8941-pwrkey.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PM8941 PMIC Power Key
+
+maintainers:
+  - Courtney Cavin <courtney.cavin@sonymobile.com>
+  - Vinod Koul <vkoul@kernel.org>
+
+allOf:
+  - $ref: input.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8941-pwrkey
+      - qcom,pm8941-resin
+      - qcom,pmk8350-pwrkey
+      - qcom,pmk8350-resin
+
+  interrupts:
+    maxItems: 1
+
+  debounce:
+    description: |
+          Time in microseconds that key must be pressed or
+          released for state change interrupt to trigger.
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  bias-pull-up:
+    description: |
+           Presence of this property indicates that the KPDPWR_N
+           pin should be configured for pull up.
+    $ref: /schemas/types.yaml#/definitions/flag
+
+  linux,code:
+    description: |
+           The input key-code associated with the power key.
+           Use the linux event codes defined in
+           include/dt-bindings/input/linux-event-codes.h
+           When property is omitted KEY_POWER is assumed.
+
+required:
+  - compatible
+  - interrupts
+
+unevaluatedProperties: false
+...
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.txt b/Documentation/devicetree/bindings/input/regulator-haptic.txt
deleted file mode 100644
index 3ed1c7eb2f97..000000000000
--- a/Documentation/devicetree/bindings/input/regulator-haptic.txt
+++ /dev/null
@@ -1,21 +0,0 @@
-* Regulator Haptic Device Tree Bindings
-
-Required Properties:
- - compatible : Should be "regulator-haptic"
- - haptic-supply : Power supply to the haptic motor.
-	[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
-
- - max-microvolt : The maximum voltage value supplied to the haptic motor.
-		[The unit of the voltage is a micro]
-
- - min-microvolt : The minimum voltage value supplied to the haptic motor.
-		[The unit of the voltage is a micro]
-
-Example:
-
-	haptics {
-		compatible = "regulator-haptic";
-		haptic-supply = <&motor_regulator>;
-		max-microvolt = <2700000>;
-		min-microvolt = <1100000>;
-	};
diff --git a/Documentation/devicetree/bindings/input/regulator-haptic.yaml b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
new file mode 100644
index 000000000000..b1ae72f9cd2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/regulator-haptic.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/input/regulator-haptic.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Regulator Haptic Device Tree Bindings
+
+maintainers:
+  - Jaewon Kim <jaewon02.kim@samsung.com>
+
+properties:
+  compatible:
+    const: regulator-haptic
+
+  haptic-supply:
+    description: >
+      Power supply to the haptic motor
+
+  max-microvolt:
+    description: >
+      The maximum voltage value supplied to the haptic motor
+
+  min-microvolt:
+    description: >
+      The minimum voltage value supplied to the haptic motor
+
+required:
+  - compatible
+  - haptic-supply
+  - max-microvolt
+  - min-microvolt
+
+additionalProperties: false
+
+examples:
+  - |
+    haptics {
+        compatible = "regulator-haptic";
+        haptic-supply = <&motor_regulator>;
+        max-microvolt = <2700000>;
+        min-microvolt = <1100000>;
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
new file mode 100644
index 000000000000..9df685bdc5db
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/chipone,icn8318.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/chipone,icn8318.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ChipOne ICN8318 Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    const: chipone,icn8318
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - wake-gpios
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@40 {
+            compatible = "chipone,icn8318";
+            reg = <0x40>;
+            interrupt-parent = <&pio>;
+            interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
+            pinctrl-names = "default";
+            pinctrl-0 = <&ts_wake_pin_p66>;
+            wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <480>;
+            touchscreen-inverted-x;
+            touchscreen-swapped-x-y;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt b/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
deleted file mode 100644
index 38b0603f65f3..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/chipone_icn8318.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* ChipOne icn8318 I2C touchscreen controller
-
-Required properties:
- - compatible		  : "chipone,icn8318"
- - reg			  : I2C slave address of the chip (0x40)
- - interrupts		  : interrupt specification for the icn8318 interrupt
- - wake-gpios		  : GPIO specification for the WAKE input
- - touchscreen-size-x	  : horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	  : vertical resolution of touchscreen (in pixels)
-
-Optional properties:
- - pinctrl-names	  : should be "default"
- - pinctrl-0:		  : a phandle pointing to the pin settings for the
-			    control gpios
- - touchscreen-fuzz-x	  : horizontal noise value of the absolute input
-			    device (in pixels)
- - touchscreen-fuzz-y	  : vertical noise value of the absolute input
-			    device (in pixels)
- - touchscreen-inverted-x : X axis is inverted (boolean)
- - touchscreen-inverted-y : Y axis is inverted (boolean)
- - touchscreen-swapped-x-y	  : X and Y axis are swapped (boolean)
-			    Swapping is done after inverting the axis
-
-Example:
-
-i2c@00000000 {
-	/* ... */
-
-	chipone_icn8318@40 {
-		compatible = "chipone,icn8318";
-		reg = <0x40>;
-		interrupt-parent = <&pio>;
-		interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_wake_pin_p66>;
-		wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */
-		touchscreen-size-x = <800>;
-		touchscreen-size-y = <480>;
-		touchscreen-inverted-x;
-		touchscreen-swapped-x-y;
-	};
-
-	/* ... */
-};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
new file mode 100644
index 000000000000..f9998edbff70
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/pixcir,pixcir_ts.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/pixcir,pixcir_ts.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Pixcir Touchscreen Controller Device Tree Bindings
+
+maintainers:
+  - Dmitry Torokhov <dmitry.torokhov@gmail.com>
+
+allOf:
+  - $ref: touchscreen.yaml#
+
+properties:
+  compatible:
+    enum:
+      - pixcir,pixcir_ts
+      - pixcir,pixcir_tangoc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  attb-gpio:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  wake-gpios:
+    maxItems: 1
+
+unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - attb-gpio
+  - touchscreen-size-x
+  - touchscreen-size-y
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        touchscreen@5c {
+            compatible = "pixcir,pixcir_ts";
+            reg = <0x5c>;
+            interrupts = <2 0>;
+            attb-gpio = <&gpf 2 0 2>;
+            touchscreen-size-x = <800>;
+            touchscreen-size-y = <600>;
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt b/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
deleted file mode 100644
index 697a3e7831e7..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/pixcir_i2c_ts.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Pixcir I2C touchscreen controllers
-
-Required properties:
-- compatible: must be "pixcir,pixcir_ts" or "pixcir,pixcir_tangoc"
-- reg: I2C address of the chip
-- interrupts: interrupt to which the chip is connected
-- attb-gpio: GPIO connected to the ATTB line of the chip
-- touchscreen-size-x: horizontal resolution of touchscreen (in pixels)
-- touchscreen-size-y: vertical resolution of touchscreen (in pixels)
-
-Optional properties:
-- reset-gpios: GPIO connected to the RESET line of the chip
-- enable-gpios: GPIO connected to the ENABLE line of the chip
-- wake-gpios: GPIO connected to the WAKE line of the chip
-
-Example:
-
-	i2c@00000000 {
-		/* ... */
-
-		pixcir_ts@5c {
-			compatible = "pixcir,pixcir_ts";
-			reg = <0x5c>;
-			interrupts = <2 0>;
-			attb-gpio = <&gpf 2 0 2>;
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <600>;
-		};
-
-		/* ... */
-	};
diff --git a/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
new file mode 100644
index 000000000000..938aab016cc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/touchscreen/ti,tsc2005.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/touchscreen/ti,tsc2005.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments TSC2004 and TSC2005 touchscreen controller bindings
+
+maintainers:
+  - Marek Vasut <marex@denx.de>
+  - Michael Welling <mwelling@ieee.org>
+
+properties:
+  $nodename:
+    pattern: "^touchscreen(@.*)?$"
+
+  compatible:
+    enum:
+      - ti,tsc2004
+      - ti,tsc2005
+
+  reg:
+    maxItems: 1
+    description: |
+      I2C address when used on the I2C bus, or the SPI chip select index
+      when used on the SPI bus
+
+  interrupts:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+    description: GPIO specifier for the controller reset line
+
+  spi-max-frequency:
+    description: TSC2005 SPI bus clock frequency.
+    maximum: 25000000
+
+  ti,x-plate-ohms:
+    description: resistance of the touchscreen's X plates in ohm (defaults to 280)
+
+  ti,esd-recovery-timeout-ms:
+    description: |
+        if the touchscreen does not respond after the configured time
+        (in milli seconds), the driver will reset it. This is disabled
+        by default.
+
+  vio-supply:
+    description: Regulator specifier
+
+  touchscreen-fuzz-pressure: true
+  touchscreen-fuzz-x: true
+  touchscreen-fuzz-y: true
+  touchscreen-max-pressure: true
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+
+allOf:
+  - $ref: touchscreen.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: ti,tsc2004
+    then:
+      properties:
+        spi-max-frequency: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@48 {
+            compatible = "ti,tsc2004";
+            reg = <0x48>;
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
+            interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        touchscreen@0 {
+            compatible = "ti,tsc2005";
+            spi-max-frequency = <6000000>;
+            reg = <0>;
+
+            vio-supply = <&vio>;
+
+            reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
+            interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
+
+            touchscreen-fuzz-x = <4>;
+            touchscreen-fuzz-y = <7>;
+            touchscreen-fuzz-pressure = <2>;
+            touchscreen-size-x = <4096>;
+            touchscreen-size-y = <4096>;
+            touchscreen-max-pressure = <2048>;
+
+            ti,x-plate-ohms = <280>;
+            ti,esd-recovery-timeout-ms = <8000>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt b/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
deleted file mode 100644
index b80c04b0e5c0..000000000000
--- a/Documentation/devicetree/bindings/input/touchscreen/tsc2005.txt
+++ /dev/null
@@ -1,64 +0,0 @@
-* Texas Instruments tsc2004 and tsc2005 touchscreen controllers
-
-Required properties:
- - compatible		      : "ti,tsc2004" or "ti,tsc2005"
- - reg			      : Device address
- - interrupts		      : IRQ specifier
- - spi-max-frequency	      : Maximum SPI clocking speed of the device
-			        (for tsc2005)
-
-Optional properties:
- - vio-supply		      : Regulator specifier
- - reset-gpios		      : GPIO specifier for the controller reset line
- - ti,x-plate-ohms	      : integer, resistance of the touchscreen's X plates
-				in ohm (defaults to 280)
- - ti,esd-recovery-timeout-ms : integer, if the touchscreen does not respond after
-				the configured time (in milli seconds), the driver
-				will reset it. This is disabled by default.
- - properties defined in touchscreen.txt
-
-Example:
-
-&i2c3 {
-	tsc2004@48 {
-		compatible = "ti,tsc2004";
-		reg = <0x48>;
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>;
-		interrupts-extended = <&gpio1 27 IRQ_TYPE_EDGE_RISING>;
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-}
-
-&mcspi1 {
-	tsc2005@0 {
-		compatible = "ti,tsc2005";
-		spi-max-frequency = <6000000>;
-		reg = <0>;
-
-		vio-supply = <&vio>;
-
-		reset-gpios = <&gpio4 8 GPIO_ACTIVE_HIGH>; /* 104 */
-		interrupts-extended = <&gpio4 4 IRQ_TYPE_EDGE_RISING>; /* 100 */
-
-		touchscreen-fuzz-x = <4>;
-		touchscreen-fuzz-y = <7>;
-		touchscreen-fuzz-pressure = <2>;
-		touchscreen-size-x = <4096>;
-		touchscreen-size-y = <4096>;
-		touchscreen-max-pressure = <2048>;
-
-		ti,x-plate-ohms = <280>;
-		ti,esd-recovery-timeout-ms = <8000>;
-	};
-}
diff --git a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
index a8873739d61a..b8204ed22dd5 100644
--- a/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
+++ b/Documentation/devicetree/bindings/interconnect/fsl,imx8m-noc.yaml
@@ -81,10 +81,10 @@ examples:
         noc_opp_table: opp-table {
             compatible = "operating-points-v2";
 
-            opp-133M {
+            opp-133333333 {
                 opp-hz = /bits/ 64 <133333333>;
             };
-            opp-800M {
+            opp-800000000 {
                 opp-hz = /bits/ 64 <800000000>;
             };
         };
diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
index 4991a6415796..2b53dcc0ea61 100644
--- a/Documentation/devicetree/bindings/mfd/axp20x.txt
+++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
@@ -26,10 +26,10 @@ Required properties:
     * "x-powers,axp803"
     * "x-powers,axp806"
     * "x-powers,axp805", "x-powers,axp806"
+    * "x-powers,axp305", "x-powers,axp805", "x-powers,axp806"
     * "x-powers,axp809"
     * "x-powers,axp813"
 - reg: The I2C slave address or RSB hardware address for the AXP chip
-- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
 - interrupt-controller: The PMIC has its own internal IRQs
 - #interrupt-cells: Should be set to 1
 
@@ -43,6 +43,7 @@ more information:
 			AXP20x/LDO3: software-based implementation
 
 Optional properties:
+- interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
 - x-powers,dcdc-freq: defines the work frequency of DC-DC in KHz
 		      AXP152/20X: range:  750-1875, Default: 1.5 MHz
 		      AXP22X/8XX: range: 1800-4050, Default: 3   MHz
diff --git a/Documentation/devicetree/bindings/mfd/brcm,cru.yaml b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
new file mode 100644
index 000000000000..fc1317ab3226
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/brcm,cru.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/brcm,cru.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom CRU
+
+maintainers:
+  - Rafał Miłecki <rafal@milecki.pl>
+
+description: |
+  Broadcom CRU ("Clock and Reset Unit" or "Central Resource Unit") is a hardware
+  block grouping smaller blocks. On Broadcom Northstar platform it contains e.g.
+  clocks, pinctrl, USB PHY and thermal.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - brcm,ns-cru
+      - const: simple-mfd
+
+  reg:
+    description: CRU registers
+
+  ranges: true
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  pinctrl:
+    $ref: ../pinctrl/brcm,ns-pinmux.yaml
+
+patternProperties:
+  '^clock-controller@[a-f0-9]+$':
+    $ref: ../clock/brcm,iproc-clocks.yaml
+
+  '^thermal@[a-f0-9]+$':
+    $ref: ../thermal/brcm,ns-thermal.yaml
+
+additionalProperties: false
+
+required:
+  - reg
+
+examples:
+  - |
+    cru-bus@1800c100 {
+        compatible = "brcm,ns-cru", "simple-mfd";
+        reg = <0x1800c100 0x1d0>;
+        ranges;
+        #address-cells = <1>;
+        #size-cells = <1>;
+
+        clock-controller@100 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-lcpll0";
+            reg = <0x100 0x14>;
+            clocks = <&osc>;
+            clock-output-names = "lcpll0", "pcie_phy", "sdio", "ddr_phy";
+        };
+
+        clock-controller@140 {
+            #clock-cells = <1>;
+            compatible = "brcm,nsp-genpll";
+            reg = <0x140 0x24>;
+            clocks = <&osc>;
+            clock-output-names = "genpll", "phy", "ethernetclk", "usbclk",
+                                 "iprocfast", "sata1", "sata2";
+        };
+
+        pinctrl {
+            compatible = "brcm,bcm4708-pinmux";
+            offset = <0x1c0>;
+        };
+
+        thermal@2c0 {
+            compatible = "brcm,ns-thermal";
+            reg = <0x2c0 0x10>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
index 779936850ee0..ec3138c1bbfc 100644
--- a/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
+++ b/Documentation/devicetree/bindings/mfd/qcom,pm8008.yaml
@@ -53,7 +53,9 @@ patternProperties:
 
     properties:
       compatible:
-        const: qcom,pm8008-gpio
+        items:
+          - const: qcom,pm8008-gpio
+          - const: qcom,spmi-gpio
 
       reg:
         description: Peripheral address of one of the two GPIO peripherals.
@@ -61,6 +63,9 @@ patternProperties:
 
       gpio-controller: true
 
+      gpio-ranges:
+        maxItems: 1
+
       interrupt-controller: true
 
       "#interrupt-cells":
@@ -75,6 +80,7 @@ patternProperties:
       - gpio-controller
       - interrupt-controller
       - "#gpio-cells"
+      - gpio-ranges
       - "#interrupt-cells"
 
     additionalProperties: false
@@ -107,10 +113,11 @@ examples:
         interrupt-parent = <&tlmm>;
         interrupts = <32 IRQ_TYPE_EDGE_RISING>;
 
-        gpio@c000 {
-          compatible = "qcom,pm8008-gpio";
+        pm8008_gpios: gpio@c000 {
+          compatible = "qcom,pm8008-gpio", "qcom,spmi-gpio";
           reg = <0xc000>;
           gpio-controller;
+          gpio-ranges = <&pm8008_gpios 0 0 2>;
           #gpio-cells = <2>;
           interrupt-controller;
           #interrupt-cells = <2>;
diff --git a/Documentation/devicetree/bindings/mfd/syscon.yaml b/Documentation/devicetree/bindings/mfd/syscon.yaml
index f14ae6da0068..abe3fd817e0b 100644
--- a/Documentation/devicetree/bindings/mfd/syscon.yaml
+++ b/Documentation/devicetree/bindings/mfd/syscon.yaml
@@ -45,9 +45,12 @@ properties:
               - microchip,sparx5-cpu-syscon
               - mstar,msc313-pmsleep
               - rockchip,px30-qos
+              - rockchip,rk3036-qos
               - rockchip,rk3066-qos
+              - rockchip,rk3228-qos
               - rockchip,rk3288-qos
               - rockchip,rk3399-qos
+              - rockchip,rk3568-qos
               - samsung,exynos3-sysreg
               - samsung,exynos4-sysreg
               - samsung,exynos5-sysreg
diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
new file mode 100644
index 000000000000..6aeedda3be15
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/ti,tps65086.yaml
@@ -0,0 +1,124 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,tps65086.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TPS65086 Power Management Integrated Circuit (PMIC)
+
+maintainers:
+  - Emil Renner Berthing <kernel@esmil.dk>
+
+properties:
+  compatible:
+    const: ti,tps65086
+
+  reg:
+    const: 0x5e
+    description: I2C slave address
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+    description: |
+      The first cell is the IRQ number. The second cell is the flags,
+      encoded as trigger masks from ../interrupt-controller/interrupts.txt.
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+    description: |
+      The first cell is the pin number and the second cell is used to specify
+      flags.  See ../gpio/gpio.txt for more information.
+
+  regulators:
+    type: object
+    description: |
+      List of child nodes that specify the regulator initialization data.
+      Child nodes must be named after their hardware counterparts:
+      buck[1-6], ldoa[1-3], swa1, swb[1-2], and vtt.
+      Each child node is defined using the standard binding for regulators and
+      the optional regulator properties defined below.
+
+    patternProperties:
+      "^buck[1-6]$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+          ti,regulator-step-size-25mv:
+            type: boolean
+            description: |
+              Set this if the regulator is factory set with a 25mv step voltage
+              mapping.
+          ti,regulator-decay:
+            type: boolean
+            description: |
+              Set this if the output needs to decay, default is for the output
+              to slew down.
+
+        additionalProperties: false
+
+      "^(ldoa[1-3]|swa1|swb[1-2]|vtt)$":
+        type: object
+        $ref: ../regulator/regulator.yaml
+
+        properties:
+          regulator-name: true
+          regulator-boot-on: true
+          regulator-always-on: true
+          regulator-min-microvolt: true
+          regulator-max-microvolt: true
+
+        additionalProperties: false
+
+additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - gpio-controller
+  - '#gpio-cells'
+  - regulators
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pmic: pmic@5e {
+            compatible = "ti,tps65086";
+            reg = <0x5e>;
+            interrupt-parent = <&gpio1>;
+            interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
+            interrupt-controller;
+            #interrupt-cells = <2>;
+            gpio-controller;
+            #gpio-cells = <2>;
+
+            regulators {
+                buck1 {
+                    regulator-name = "vcc1";
+                    regulator-min-microvolt = <1600000>;
+                    regulator-max-microvolt = <1600000>;
+                    regulator-boot-on;
+                    ti,regulator-decay;
+                    ti,regulator-step-size-25mv;
+                };
+            };
+        };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/mfd/tps65086.txt b/Documentation/devicetree/bindings/mfd/tps65086.txt
deleted file mode 100644
index 67eac0ed32df..000000000000
--- a/Documentation/devicetree/bindings/mfd/tps65086.txt
+++ /dev/null
@@ -1,54 +0,0 @@
-* TPS65086 Power Management Integrated Circuit (PMIC) bindings
-
-Required properties:
- - compatible		: Should be "ti,tps65086".
- - reg			: I2C slave address.
- - interrupts		: The interrupt line the device is connected to.
- - interrupt-controller	: Marks the device node as an interrupt controller.
- - #interrupt-cells	: The number of cells to describe an IRQ, should be 2.
-			    The first cell is the IRQ number.
-			    The second cell is the flags, encoded as trigger
-			    masks from ../interrupt-controller/interrupts.txt.
- - gpio-controller      : Marks the device node as a GPIO Controller.
- - #gpio-cells          : Should be two.  The first cell is the pin number and
-                            the second cell is used to specify flags.
-                            See ../gpio/gpio.txt for more information.
- - regulators:          : List of child nodes that specify the regulator
-                            initialization data. Child nodes must be named
-                            after their hardware counterparts: buck[1-6],
-                            ldoa[1-3], swa1, swb[1-2], and vtt. Each child
-                            node is defined using the standard binding for
-                            regulators and the optional regulator properties
-                            defined below.
-
-Optional regulator properties:
- - ti,regulator-step-size-25mv	: This is applicable for buck[1-6], set this
-				    if the regulator is factory set with a 25mv
-				    step voltage mapping.
- - ti,regulator-decay		: This is applicable for buck[1-6], set this if
-				    the output needs to decay, default is for
-				    the output to slew down.
-
-Example:
-
-	pmic: tps65086@5e {
-		compatible = "ti,tps65086";
-		reg = <0x5e>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <28 IRQ_TYPE_LEVEL_LOW>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		gpio-controller;
-		#gpio-cells = <2>;
-
-		regulators {
-			buck1 {
-				regulator-name = "vcc1";
-				regulator-min-microvolt = <1600000>;
-				regulator-max-microvolt = <1600000>;
-				regulator-boot-on;
-				ti,regulator-decay;
-				ti,regulator-step-size-25mv;
-			};
-		};
-	};
diff --git a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
index aeff2bd774dd..729ae97b63d9 100644
--- a/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
+++ b/Documentation/devicetree/bindings/opp/allwinner,sun50i-h6-operating-points.yaml
@@ -18,6 +18,9 @@ description: |
   sun50i-cpufreq-nvmem driver reads the efuse value from the SoC to
   provide the OPP framework with required information.
 
+allOf:
+  - $ref: opp-v2-base.yaml#
+
 properties:
   compatible:
     const: allwinner,sun50i-h6-operating-points
@@ -43,6 +46,7 @@ patternProperties:
 
     properties:
       opp-hz: true
+      clock-latency-ns: true
 
     patternProperties:
       "opp-microvolt-.*": true
diff --git a/Documentation/devicetree/bindings/opp/opp-v1.yaml b/Documentation/devicetree/bindings/opp/opp-v1.yaml
new file mode 100644
index 000000000000..d585d536a3fb
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v1.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) v1 Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |+
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This binding only supports voltage-frequency pairs.
+
+select: true
+
+properties:
+  operating-points:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    items:
+      items:
+        - description: Frequency in kHz
+        - description: Voltage for OPP in uV
+
+
+additionalProperties: true
+examples:
+  - |
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            operating-points =
+                /* kHz    uV */
+                <792000 1100000>,
+                <396000 950000>,
+                <198000 850000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2-base.yaml b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
new file mode 100644
index 000000000000..ae3ae4d39843
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2-base.yaml
@@ -0,0 +1,214 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2-base.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Common Binding
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+description: |
+  Devices work at voltage-current-frequency combinations and some implementations
+  have the liberty of choosing these. These combinations are called Operating
+  Performance Points aka OPPs. This document defines bindings for these OPPs
+  applicable across wide range of devices. For illustration purpose, this document
+  uses CPU as a device.
+
+  This describes the OPPs belonging to a device.
+
+select: false
+
+properties:
+  $nodename:
+    pattern: '^opp-table(-[a-z0-9]+)?$'
+
+  opp-shared:
+    description:
+      Indicates that device nodes using this OPP Table Node's phandle switch
+      their DVFS state together, i.e. they share clock/voltage/current lines.
+      Missing property means devices have independent clock/voltage/current
+      lines, but they share OPP tables.
+    type: boolean
+
+patternProperties:
+  '^opp-?[0-9]+$':
+    type: object
+    description:
+      One or more OPP nodes describing voltage-current-frequency combinations.
+      Their name isn't significant but their phandle can be used to reference an
+      OPP. These are mandatory except for the case where the OPP table is
+      present only to indicate dependency between devices using the opp-shared
+      property.
+
+    properties:
+      opp-hz:
+        description:
+          Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
+          required property for all device nodes, unless another "required"
+          property to uniquely identify the OPP nodes exists. Devices like power
+          domains must have another (implementation dependent) property.
+
+      opp-microvolt:
+        description: |
+          Voltage for the OPP
+
+          A single regulator's voltage is specified with an array of size one or three.
+          Single entry is for target voltage and three entries are for <target min max>
+          voltages.
+
+          Entries for multiple regulators shall be provided in the same field separated
+          by angular brackets <>. The OPP binding doesn't provide any provisions to
+          relate the values to their power supplies or the order in which the supplies
+          need to be configured and that is left for the implementation specific
+          binding.
+
+          Entries for all regulators shall be of the same size, i.e. either all use a
+          single value or triplets.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      opp-microamp:
+        description: |
+          The maximum current drawn by the device in microamperes considering
+          system specific parameters (such as transients, process, aging,
+          maximum operating temperature range etc.) as necessary. This may be
+          used to set the most efficient regulator operating mode.
+
+          Should only be set if opp-microvolt or opp-microvolt-<name> is set for
+          the OPP.
+
+          Entries for multiple regulators shall be provided in the same field
+          separated by angular brackets <>. If current values aren't required
+          for a regulator, then it shall be filled with 0. If current values
+          aren't required for any of the regulators, then this field is not
+          required. The OPP binding doesn't provide any provisions to relate the
+          values to their power supplies or the order in which the supplies need
+          to be configured and that is left for the implementation specific
+          binding.
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+      opp-level:
+        description:
+          A value representing the performance level of the device.
+        $ref: /schemas/types.yaml#/definitions/uint32
+
+      opp-peak-kBps:
+        description:
+          Peak bandwidth in kilobytes per second, expressed as an array of
+          32-bit big-endian integers. Each element of the array represents the
+          peak bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      opp-avg-kBps:
+        description:
+          Average bandwidth in kilobytes per second, expressed as an array
+          of 32-bit big-endian integers. Each element of the array represents the
+          average bandwidth value of each interconnect path. The number of elements
+          should match the number of interconnect paths. This property is only
+          meaningful in OPP tables where opp-peak-kBps is present.
+        minItems: 1
+        maxItems: 32  # Should be enough
+
+      clock-latency-ns:
+        description:
+          Specifies the maximum possible transition latency (in nanoseconds) for
+          switching to this OPP from any other OPP.
+
+      turbo-mode:
+        description:
+          Marks the OPP to be used only for turbo modes. Turbo mode is available
+          on some platforms, where the device can run over its operating
+          frequency for a short duration of time limited by the device's power,
+          current and thermal limits.
+        type: boolean
+
+      opp-suspend:
+        description:
+          Marks the OPP to be used during device suspend. If multiple OPPs in
+          the table have this, the OPP with highest opp-hz will be used.
+        type: boolean
+
+      opp-supported-hw:
+        description: |
+          This property allows a platform to enable only a subset of the OPPs
+          from the larger set present in the OPP table, based on the current
+          version of the hardware (already known to the operating system).
+
+          Each block present in the array of blocks in this property, represents
+          a sub-group of hardware versions supported by the OPP. i.e. <sub-group
+          A>, <sub-group B>, etc. The OPP will be enabled if _any_ of these
+          sub-groups match the hardware's version.
+
+          Each sub-group is a platform defined array representing the hierarchy
+          of hardware versions supported by the platform. For a platform with
+          three hierarchical levels of version (X.Y.Z), this field shall look
+          like
+
+          opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
+
+          Each level (eg. X1) in version hierarchy is represented by a 32 bit
+          value, one bit per version and so there can be maximum 32 versions per
+          level. Logical AND (&) operation is performed for each level with the
+          hardware's level version and a non-zero output for _all_ the levels in
+          a sub-group means the OPP is supported by hardware. A value of
+          0xFFFFFFFF for each level in the sub-group will enable the OPP for all
+          versions for the hardware.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        maxItems: 32
+        items:
+          minItems: 1
+          maxItems: 4
+
+      required-opps:
+        description:
+          This contains phandle to an OPP node in another device's OPP table. It
+          may contain an array of phandles, where each phandle points to an OPP
+          of a different device. It should not contain multiple phandles to the
+          OPP nodes in the same OPP table. This specifies the minimum required
+          OPP of the device(s), whose OPP's phandle is present in this property,
+          for the functioning of the current device at the current OPP (where
+          this property is present).
+        $ref: /schemas/types.yaml#/definitions/phandle-array
+
+    patternProperties:
+      '^opp-microvolt-':
+        description:
+          Named opp-microvolt property. This is exactly similar to the above
+          opp-microvolt property, but allows multiple voltage ranges to be
+          provided for the same OPP. At runtime, the platform can pick a <name>
+          and matching opp-microvolt-<name> property will be enabled for all
+          OPPs. If the platform doesn't pick a specific <name> or the <name>
+          doesn't match with any opp-microvolt-<name> properties, then
+          opp-microvolt property shall be used, if present.
+        $ref: /schemas/types.yaml#/definitions/uint32-matrix
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+        items:
+          minItems: 1
+          maxItems: 3
+
+      '^opp-microamp-':
+        description:
+          Named opp-microamp property. Similar to opp-microvolt-<name> property,
+          but for microamp instead.
+        $ref: /schemas/types.yaml#/definitions/uint32-array
+        minItems: 1
+        maxItems: 8   # Should be enough regulators
+
+    dependencies:
+      opp-avg-kBps: [ opp-peak-kBps ]
+
+required:
+  - compatible
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/opp/opp-v2.yaml b/Documentation/devicetree/bindings/opp/opp-v2.yaml
new file mode 100644
index 000000000000..eaf8fba2c691
--- /dev/null
+++ b/Documentation/devicetree/bindings/opp/opp-v2.yaml
@@ -0,0 +1,475 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/opp/opp-v2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic OPP (Operating Performance Points) Bindings
+
+maintainers:
+  - Viresh Kumar <viresh.kumar@linaro.org>
+
+allOf:
+  - $ref: opp-v2-base.yaml#
+
+properties:
+  compatible:
+    const: operating-points-v2
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    /*
+     * Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states
+     * together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a9";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu0_opp_table0>;
+        };
+    };
+
+    cpu0_opp_table0: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
+     * independently.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@1 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@2 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <2>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 2>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+
+        cpu@3 {
+            compatible = "qcom,krait";
+            device_type = "cpu";
+            reg = <3>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 3>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply3>;
+            operating-points-v2 = <&cpu_opp_table>;
+        };
+    };
+
+    cpu_opp_table: opp-table {
+        compatible = "operating-points-v2";
+
+        /*
+         * Missing opp-shared property means CPUs switch DVFS states
+         * independently.
+         */
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            lock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /*
+     * Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
+     * DVFS state together.
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@1 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <1>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 0>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply0>;
+            operating-points-v2 = <&cluster0_opp>;
+        };
+
+        cpu@100 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <100>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+
+        cpu@101 {
+            compatible = "arm,cortex-a15";
+            device_type = "cpu";
+            reg = <101>;
+            next-level-cache = <&L2>;
+            clocks = <&clk_controller 1>;
+            clock-names = "cpu";
+            cpu-supply = <&cpu_supply1>;
+            operating-points-v2 = <&cluster1_opp>;
+        };
+    };
+
+    cluster0_opp: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <975000 970000 985000>;
+            opp-microamp = <70000>;
+            clock-latency-ns = <300000>;
+            opp-suspend;
+        };
+        opp-1100000000 {
+            opp-hz = /bits/ 64 <1100000000>;
+            opp-microvolt = <1000000 980000 1010000>;
+            opp-microamp = <80000>;
+            clock-latency-ns = <310000>;
+        };
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt = <1025000>;
+            opp-microamp = <90000>;
+            clock-latency-ns = <290000>;
+            turbo-mode;
+        };
+    };
+
+    cluster1_opp: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1300000000 {
+            opp-hz = /bits/ 64 <1300000000>;
+            opp-microvolt = <1050000 1045000 1055000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            opp-suspend;
+        };
+        opp-1400000000 {
+            opp-hz = /bits/ 64 <1400000000>;
+            opp-microvolt = <1075000>;
+            opp-microamp = <100000>;
+            clock-latency-ns = <400000>;
+        };
+        opp-1500000000 {
+            opp-hz = /bits/ 64 <1500000000>;
+            opp-microvolt = <1100000 1010000 1110000>;
+            opp-microamp = <95000>;
+            clock-latency-ns = <400000>;
+            turbo-mode;
+        };
+    };
+
+  - |
+    /* Example 4: Handling multiple regulators */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "foo,cpu-type";
+            device_type = "cpu";
+            reg = <0>;
+
+            vcc0-supply = <&cpu_supply0>;
+            vcc1-supply = <&cpu_supply1>;
+            vcc2-supply = <&cpu_supply2>;
+            operating-points-v2 = <&cpu0_opp_table4>;
+        };
+    };
+
+    cpu0_opp_table4: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt = <970000>, /* Supply 0 */
+                            <960000>, /* Supply 1 */
+                            <960000>; /* Supply 2 */
+            opp-microamp =  <70000>,  /* Supply 0 */
+                            <70000>,  /* Supply 1 */
+                            <70000>;  /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000001 {
+            opp-hz = /bits/ 64 <1000000001>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                            <965000 960000 975000>, /* Supply 1 */
+                            <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <70000>,    /* Supply 1 */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+
+        /* OR */
+
+        opp-1000000002 {
+            opp-hz = /bits/ 64 <1000000002>;
+            opp-microvolt = <975000 970000 985000>, /* Supply 0 */
+                <965000 960000 975000>, /* Supply 1 */
+                <965000 960000 975000>; /* Supply 2 */
+            opp-microamp =  <70000>,    /* Supply 0 */
+                <0>,      /* Supply 1 doesn't need this */
+                <70000>;    /* Supply 2 */
+            clock-latency-ns = <300000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 5: opp-supported-hw
+     * (example: three level hierarchy of versions: cuts, substrate and process)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            cpu-supply = <&cpu_supply>;
+            operating-points-v2 = <&cpu0_opp_table_slow>;
+        };
+    };
+
+    cpu0_opp_table_slow: opp-table {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-600000000 {
+            /*
+             * Supports all substrate and process versions for 0xF
+             * cuts, i.e. only first four cuts.
+             */
+            opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <600000000>;
+        };
+
+        opp-800000000 {
+            /*
+             * Supports:
+             * - cuts: only one, 6th cut (represented by 6th bit).
+             * - substrate: supports 16 different substrate versions
+             * - process: supports 9 different process versions
+             */
+            opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>;
+            opp-hz = /bits/ 64 <800000000>;
+        };
+
+        opp-900000000 {
+            /*
+             * Supports:
+             * - All cuts and substrate where process version is 0x2.
+             * - All cuts and process where substrate version is 0x2.
+             */
+            opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>,
+                               <0xFFFFFFFF 0x01 0xFFFFFFFF>;
+            opp-hz = /bits/ 64 <900000000>;
+        };
+    };
+
+  - |
+    /*
+     * Example 6: opp-microvolt-<name>, opp-microamp-<name>:
+     * (example: device with two possible microvolt ranges: slow and fast)
+     */
+    cpus {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a7";
+            device_type = "cpu";
+            reg = <0>;
+            operating-points-v2 = <&cpu0_opp_table6>;
+        };
+    };
+
+    cpu0_opp_table6: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+
+        opp-1000000000 {
+            opp-hz = /bits/ 64 <1000000000>;
+            opp-microvolt-slow = <915000 900000 925000>;
+            opp-microvolt-fast = <975000 970000 985000>;
+            opp-microamp-slow =  <70000>;
+            opp-microamp-fast =  <71000>;
+        };
+
+        opp-1200000000 {
+            opp-hz = /bits/ 64 <1200000000>;
+            opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
+                                 <925000 910000 935000>; /* Supply vcc1 */
+            opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
+                                 <965000 960000 975000>; /* Supply vcc1 */
+            opp-microamp =  <70000>; /* Will be used for both slow/fast */
+        };
+    };
+
+  - |
+    /*
+     * Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
+     * distinct clock controls but two sets of clock/voltage/current lines.
+     */
+    cpus {
+        #address-cells = <2>;
+        #size-cells = <0>;
+
+        cpu@0 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x100>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 0>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@1 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x101>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 1>;
+            operating-points-v2 = <&cpu_opp0_table>;
+        };
+        cpu@2 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x102>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 2>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+        cpu@3 {
+            compatible = "arm,cortex-a53";
+            device_type = "cpu";
+            reg = <0x0 0x103>;
+            next-level-cache = <&A53_L2>;
+            clocks = <&dvfs_controller 3>;
+            operating-points-v2 = <&cpu_opp1_table>;
+        };
+
+    };
+
+    cpu_opp0_table: opp-table-0 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+
+    cpu_opp1_table: opp-table-1 {
+        compatible = "operating-points-v2";
+        opp-shared;
+    };
+...
diff --git a/Documentation/devicetree/bindings/opp/opp.txt b/Documentation/devicetree/bindings/opp/opp.txt
deleted file mode 100644
index 08b3da4736cf..000000000000
--- a/Documentation/devicetree/bindings/opp/opp.txt
+++ /dev/null
@@ -1,622 +0,0 @@
-Generic OPP (Operating Performance Points) Bindings
-----------------------------------------------------
-
-Devices work at voltage-current-frequency combinations and some implementations
-have the liberty of choosing these. These combinations are called Operating
-Performance Points aka OPPs. This document defines bindings for these OPPs
-applicable across wide range of devices. For illustration purpose, this document
-uses CPU as a device.
-
-This document contain multiple versions of OPP binding and only one of them
-should be used per device.
-
-Binding 1: operating-points
-============================
-
-This binding only supports voltage-frequency pairs.
-
-Properties:
-- operating-points: An array of 2-tuples items, and each item consists
-  of frequency and voltage like <freq-kHz vol-uV>.
-	freq: clock frequency in kHz
-	vol: voltage in microvolt
-
-Examples:
-
-cpu@0 {
-	compatible = "arm,cortex-a9";
-	reg = <0>;
-	next-level-cache = <&L2>;
-	operating-points = <
-		/* kHz    uV */
-		792000  1100000
-		396000  950000
-		198000  850000
-	>;
-};
-
-
-Binding 2: operating-points-v2
-============================
-
-* Property: operating-points-v2
-
-Devices supporting OPPs must set their "operating-points-v2" property with
-phandle to a OPP table in their DT node. The OPP core will use this phandle to
-find the operating points for the device.
-
-This can contain more than one phandle for power domain providers that provide
-multiple power domains. That is, one phandle for each power domain. If only one
-phandle is available, then the same OPP table will be used for all power domains
-provided by the power domain provider.
-
-If required, this can be extended for SoC vendor specific bindings. Such bindings
-should be documented as Documentation/devicetree/bindings/power/<vendor>-opp.txt
-and should have a compatible description like: "operating-points-v2-<vendor>".
-
-* OPP Table Node
-
-This describes the OPPs belonging to a device. This node can have following
-properties:
-
-Required properties:
-- compatible: Allow OPPs to express their compatibility. It should be:
-  "operating-points-v2".
-
-- OPP nodes: One or more OPP nodes describing voltage-current-frequency
-  combinations. Their name isn't significant but their phandle can be used to
-  reference an OPP. These are mandatory except for the case where the OPP table
-  is present only to indicate dependency between devices using the opp-shared
-  property.
-
-Optional properties:
-- opp-shared: Indicates that device nodes using this OPP Table Node's phandle
-  switch their DVFS state together, i.e. they share clock/voltage/current lines.
-  Missing property means devices have independent clock/voltage/current lines,
-  but they share OPP tables.
-
-- status: Marks the OPP table enabled/disabled.
-
-
-* OPP Node
-
-This defines voltage-current-frequency combinations along with other related
-properties.
-
-Required properties:
-- opp-hz: Frequency in Hz, expressed as a 64-bit big-endian integer. This is a
-  required property for all device nodes, unless another "required" property to
-  uniquely identify the OPP nodes exists. Devices like power domains must have
-  another (implementation dependent) property.
-
-- opp-peak-kBps: Peak bandwidth in kilobytes per second, expressed as an array
-  of 32-bit big-endian integers. Each element of the array represents the
-  peak bandwidth value of each interconnect path. The number of elements should
-  match the number of interconnect paths.
-
-Optional properties:
-- opp-microvolt: voltage in micro Volts.
-
-  A single regulator's voltage is specified with an array of size one or three.
-  Single entry is for target voltage and three entries are for <target min max>
-  voltages.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. The OPP binding doesn't provide any provisions to
-  relate the values to their power supplies or the order in which the supplies
-  need to be configured and that is left for the implementation specific
-  binding.
-
-  Entries for all regulators shall be of the same size, i.e. either all use a
-  single value or triplets.
-
-- opp-microvolt-<name>: Named opp-microvolt property. This is exactly similar to
-  the above opp-microvolt property, but allows multiple voltage ranges to be
-  provided for the same OPP. At runtime, the platform can pick a <name> and
-  matching opp-microvolt-<name> property will be enabled for all OPPs. If the
-  platform doesn't pick a specific <name> or the <name> doesn't match with any
-  opp-microvolt-<name> properties, then opp-microvolt property shall be used, if
-  present.
-
-- opp-microamp: The maximum current drawn by the device in microamperes
-  considering system specific parameters (such as transients, process, aging,
-  maximum operating temperature range etc.) as necessary. This may be used to
-  set the most efficient regulator operating mode.
-
-  Should only be set if opp-microvolt is set for the OPP.
-
-  Entries for multiple regulators shall be provided in the same field separated
-  by angular brackets <>. If current values aren't required for a regulator,
-  then it shall be filled with 0. If current values aren't required for any of
-  the regulators, then this field is not required. The OPP binding doesn't
-  provide any provisions to relate the values to their power supplies or the
-  order in which the supplies need to be configured and that is left for the
-  implementation specific binding.
-
-- opp-microamp-<name>: Named opp-microamp property. Similar to
-  opp-microvolt-<name> property, but for microamp instead.
-
-- opp-level: A value representing the performance level of the device,
-  expressed as a 32-bit integer.
-
-- opp-avg-kBps: Average bandwidth in kilobytes per second, expressed as an array
-  of 32-bit big-endian integers. Each element of the array represents the
-  average bandwidth value of each interconnect path. The number of elements
-  should match the number of interconnect paths. This property is only
-  meaningful in OPP tables where opp-peak-kBps is present.
-
-- clock-latency-ns: Specifies the maximum possible transition latency (in
-  nanoseconds) for switching to this OPP from any other OPP.
-
-- turbo-mode: Marks the OPP to be used only for turbo modes. Turbo mode is
-  available on some platforms, where the device can run over its operating
-  frequency for a short duration of time limited by the device's power, current
-  and thermal limits.
-
-- opp-suspend: Marks the OPP to be used during device suspend. If multiple OPPs
-  in the table have this, the OPP with highest opp-hz will be used.
-
-- opp-supported-hw: This property allows a platform to enable only a subset of
-  the OPPs from the larger set present in the OPP table, based on the current
-  version of the hardware (already known to the operating system).
-
-  Each block present in the array of blocks in this property, represents a
-  sub-group of hardware versions supported by the OPP. i.e. <sub-group A>,
-  <sub-group B>, etc. The OPP will be enabled if _any_ of these sub-groups match
-  the hardware's version.
-
-  Each sub-group is a platform defined array representing the hierarchy of
-  hardware versions supported by the platform. For a platform with three
-  hierarchical levels of version (X.Y.Z), this field shall look like
-
-  opp-supported-hw = <X1 Y1 Z1>, <X2 Y2 Z2>, <X3 Y3 Z3>.
-
-  Each level (eg. X1) in version hierarchy is represented by a 32 bit value, one
-  bit per version and so there can be maximum 32 versions per level. Logical AND
-  (&) operation is performed for each level with the hardware's level version
-  and a non-zero output for _all_ the levels in a sub-group means the OPP is
-  supported by hardware. A value of 0xFFFFFFFF for each level in the sub-group
-  will enable the OPP for all versions for the hardware.
-
-- status: Marks the node enabled/disabled.
-
-- required-opps: This contains phandle to an OPP node in another device's OPP
-  table. It may contain an array of phandles, where each phandle points to an
-  OPP of a different device. It should not contain multiple phandles to the OPP
-  nodes in the same OPP table. This specifies the minimum required OPP of the
-  device(s), whose OPP's phandle is present in this property, for the
-  functioning of the current device at the current OPP (where this property is
-  present).
-
-Example 1: Single cluster Dual-core ARM cortex A9, switch DVFS states together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a9";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a9";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 2: Single cluster, Quad-core Qualcom-krait, switches DVFS states
-independently.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "qcom,krait";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@1 {
-			compatible = "qcom,krait";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@2 {
-			compatible = "qcom,krait";
-			reg = <2>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 2>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-
-		cpu@3 {
-			compatible = "qcom,krait";
-			reg = <3>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 3>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply3>;
-			operating-points-v2 = <&cpu_opp_table>;
-		};
-	};
-
-	cpu_opp_table: opp_table {
-		compatible = "operating-points-v2";
-
-		/*
-		 * Missing opp-shared property means CPUs switch DVFS states
-		 * independently.
-		 */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000;
-			lock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 3: Dual-cluster, Dual-core per cluster. CPUs within a cluster switch
-DVFS state together.
-
-/ {
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			reg = <0>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@1 {
-			compatible = "arm,cortex-a7";
-			reg = <1>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 0>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply0>;
-			operating-points-v2 = <&cluster0_opp>;
-		};
-
-		cpu@100 {
-			compatible = "arm,cortex-a15";
-			reg = <100>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-
-		cpu@101 {
-			compatible = "arm,cortex-a15";
-			reg = <101>;
-			next-level-cache = <&L2>;
-			clocks = <&clk_controller 1>;
-			clock-names = "cpu";
-			cpu-supply = <&cpu_supply1>;
-			operating-points-v2 = <&cluster1_opp>;
-		};
-	};
-
-	cluster0_opp: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>;
-			opp-microamp = <70000>;
-			clock-latency-ns = <300000>;
-			opp-suspend;
-		};
-		opp-1100000000 {
-			opp-hz = /bits/ 64 <1100000000>;
-			opp-microvolt = <1000000 980000 1010000>;
-			opp-microamp = <80000>;
-			clock-latency-ns = <310000>;
-		};
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt = <1025000>;
-			opp-microamp = <90000>;
-			clock-latency-ns = <290000>;
-			turbo-mode;
-		};
-	};
-
-	cluster1_opp: opp_table1 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1300000000 {
-			opp-hz = /bits/ 64 <1300000000>;
-			opp-microvolt = <1050000 1045000 1055000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			opp-suspend;
-		};
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-microvolt = <1075000>;
-			opp-microamp = <100000>;
-			clock-latency-ns = <400000>;
-		};
-		opp-1500000000 {
-			opp-hz = /bits/ 64 <1500000000>;
-			opp-microvolt = <1100000 1010000 1110000>;
-			opp-microamp = <95000>;
-			clock-latency-ns = <400000>;
-			turbo-mode;
-		};
-	};
-};
-
-Example 4: Handling multiple regulators
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "vendor,cpu-type";
-			...
-
-			vcc0-supply = <&cpu_supply0>;
-			vcc1-supply = <&cpu_supply1>;
-			vcc2-supply = <&cpu_supply2>;
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <970000>, /* Supply 0 */
-					<960000>, /* Supply 1 */
-					<960000>; /* Supply 2 */
-			opp-microamp =  <70000>,  /* Supply 0 */
-					<70000>,  /* Supply 1 */
-					<70000>;  /* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<70000>,		/* Supply 1 */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-
-		/* OR */
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt = <975000 970000 985000>, /* Supply 0 */
-					<965000 960000 975000>, /* Supply 1 */
-					<965000 960000 975000>; /* Supply 2 */
-			opp-microamp =  <70000>,		/* Supply 0 */
-					<0>,			/* Supply 1 doesn't need this */
-					<70000>;		/* Supply 2 */
-			clock-latency-ns = <300000>;
-		};
-	};
-};
-
-Example 5: opp-supported-hw
-(example: three level hierarchy of versions: cuts, substrate and process)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			cpu-supply = <&cpu_supply>
-			operating-points-v2 = <&cpu0_opp_table_slow>;
-		};
-	};
-
-	opp_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-600000000 {
-			/*
-			 * Supports all substrate and process versions for 0xF
-			 * cuts, i.e. only first four cuts.
-			 */
-			opp-supported-hw = <0xF 0xFFFFFFFF 0xFFFFFFFF>
-			opp-hz = /bits/ 64 <600000000>;
-			...
-		};
-
-		opp-800000000 {
-			/*
-			 * Supports:
-			 * - cuts: only one, 6th cut (represented by 6th bit).
-			 * - substrate: supports 16 different substrate versions
-			 * - process: supports 9 different process versions
-			 */
-			opp-supported-hw = <0x20 0xff0000ff 0x0000f4f0>
-			opp-hz = /bits/ 64 <800000000>;
-			...
-		};
-
-		opp-900000000 {
-			/*
-			 * Supports:
-			 * - All cuts and substrate where process version is 0x2.
-			 * - All cuts and process where substrate version is 0x2.
-			 */
-			opp-supported-hw = <0xFFFFFFFF 0xFFFFFFFF 0x02>, <0xFFFFFFFF 0x01 0xFFFFFFFF>
-			opp-hz = /bits/ 64 <900000000>;
-			...
-		};
-	};
-};
-
-Example 6: opp-microvolt-<name>, opp-microamp-<name>:
-(example: device with two possible microvolt ranges: slow and fast)
-
-/ {
-	cpus {
-		cpu@0 {
-			compatible = "arm,cortex-a7";
-			...
-
-			operating-points-v2 = <&cpu0_opp_table>;
-		};
-	};
-
-	cpu0_opp_table: opp_table0 {
-		compatible = "operating-points-v2";
-		opp-shared;
-
-		opp-1000000000 {
-			opp-hz = /bits/ 64 <1000000000>;
-			opp-microvolt-slow = <915000 900000 925000>;
-			opp-microvolt-fast = <975000 970000 985000>;
-			opp-microamp-slow =  <70000>;
-			opp-microamp-fast =  <71000>;
-		};
-
-		opp-1200000000 {
-			opp-hz = /bits/ 64 <1200000000>;
-			opp-microvolt-slow = <915000 900000 925000>, /* Supply vcc0 */
-					      <925000 910000 935000>; /* Supply vcc1 */
-			opp-microvolt-fast = <975000 970000 985000>, /* Supply vcc0 */
-					     <965000 960000 975000>; /* Supply vcc1 */
-			opp-microamp =  <70000>; /* Will be used for both slow/fast */
-		};
-	};
-};
-
-Example 7: Single cluster Quad-core ARM cortex A53, OPP points from firmware,
-distinct clock controls but two sets of clock/voltage/current lines.
-
-/ {
-	cpus {
-		#address-cells = <2>;
-		#size-cells = <0>;
-
-		cpu@0 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x100>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 0>;
-			operating-points-v2 = <&cpu_opp0_table>;
-		};
-		cpu@1 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x101>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 1>;
-			operating-points-v2 = <&cpu_opp0_table>;
-		};
-		cpu@2 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x102>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 2>;
-			operating-points-v2 = <&cpu_opp1_table>;
-		};
-		cpu@3 {
-			compatible = "arm,cortex-a53";
-			reg = <0x0 0x103>;
-			next-level-cache = <&A53_L2>;
-			clocks = <&dvfs_controller 3>;
-			operating-points-v2 = <&cpu_opp1_table>;
-		};
-
-	};
-
-	cpu_opp0_table: opp0_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-	};
-
-	cpu_opp1_table: opp1_table {
-		compatible = "operating-points-v2";
-		opp-shared;
-	};
-};
diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt
index 32eb0793c7e6..41d3e4ff2dc3 100644
--- a/Documentation/devicetree/bindings/opp/qcom-opp.txt
+++ b/Documentation/devicetree/bindings/opp/qcom-opp.txt
@@ -1,7 +1,7 @@
 Qualcomm OPP bindings to describe OPP nodes
 
 The bindings are based on top of the operating-points-v2 bindings
-described in Documentation/devicetree/bindings/opp/opp.txt
+described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml
 Additional properties are described below.
 
 * OPP Table Node
diff --git a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
index 832346e489a3..b70d326117cd 100644
--- a/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
+++ b/Documentation/devicetree/bindings/opp/ti-omap5-opp-supply.txt
@@ -13,7 +13,7 @@ regulators to the device that will undergo OPP transitions we can make use
 of the multi regulator binding that is part of the OPP core described here [1]
 to describe both regulators needed by the platform.
 
-[1] Documentation/devicetree/bindings/opp/opp.txt
+[1] Documentation/devicetree/bindings/opp/opp-v2.yaml
 
 Required Properties for Device Node:
 - vdd-supply: phandle to regulator controlling VDD supply
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
new file mode 100644
index 000000000000..e87ff27526ff
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie-ep.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie-ep.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Keem Bay PCIe controller Endpoint mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+properties:
+  compatible:
+    const: intel,keembay-pcie-ep
+
+  reg:
+    maxItems: 5
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: dbi2
+      - const: atu
+      - const: addr_space
+      - const: apb
+
+  interrupts:
+    maxItems: 4
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+      - const: pcie_mem_access
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+  - interrupt-names
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    pcie-ep@37000000 {
+          compatible = "intel,keembay-pcie-ep";
+          reg = <0x37000000 0x00001000>,
+                <0x37100000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36000000 0x01000000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "dbi2", "atu", "addr_space", "apb";
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_EDGE_RISING>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err", "pcie_mem_access";
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
new file mode 100644
index 000000000000..ed4400c9ac09
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/intel,keembay-pcie.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/pci/intel,keembay-pcie.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Intel Keem Bay PCIe controller Root Complex mode
+
+maintainers:
+  - Wan Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
+  - Srikanth Thokala <srikanth.thokala@intel.com>
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+properties:
+  compatible:
+    const: intel,keembay-pcie
+
+  ranges:
+    maxItems: 1
+
+  reset-gpios:
+    maxItems: 1
+
+  reg:
+    maxItems: 4
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: atu
+      - const: config
+      - const: apb
+
+  clocks:
+    maxItems: 2
+
+  clock-names:
+    items:
+      - const: master
+      - const: aux
+
+  interrupts:
+    maxItems: 3
+
+  interrupt-names:
+    items:
+      - const: pcie
+      - const: pcie_ev
+      - const: pcie_err
+
+  num-lanes:
+    description: Number of lanes to use.
+    enum: [ 1, 2 ]
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - ranges
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - reset-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/gpio/gpio.h>
+    #define KEEM_BAY_A53_PCIE
+    #define KEEM_BAY_A53_AUX_PCIE
+    pcie@37000000 {
+          compatible = "intel,keembay-pcie";
+          reg = <0x37000000 0x00001000>,
+                <0x37300000 0x00001000>,
+                <0x36e00000 0x00200000>,
+                <0x37800000 0x00000200>;
+          reg-names = "dbi", "atu", "config", "apb";
+          #address-cells = <3>;
+          #size-cells = <2>;
+          device_type = "pci";
+          ranges = <0x02000000 0 0x36000000 0x36000000 0 0x00e00000>;
+          interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+                       <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+          interrupt-names = "pcie", "pcie_ev", "pcie_err";
+          clocks = <&scmi_clk KEEM_BAY_A53_PCIE>,
+                   <&scmi_clk KEEM_BAY_A53_AUX_PCIE>;
+          clock-names = "master", "aux";
+          reset-gpios = <&pca2 9 GPIO_ACTIVE_LOW>;
+          num-lanes = <2>;
+    };
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
new file mode 100644
index 000000000000..841a3d284bbf
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie-cfg.yaml
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/mediatek-pcie-cfg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek PCIECFG controller
+
+maintainers:
+  - Chuanjia Liu <chuanjia.liu@mediatek.com>
+  - Jianjun Wang <jianjun.wang@mediatek.com>
+
+description: |
+  The MediaTek PCIECFG controller controls some feature about
+  LTSSM, ASPM and so on.
+
+properties:
+  compatible:
+    items:
+      - enum:
+          - mediatek,generic-pciecfg
+      - const: syscon
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    pciecfg: pciecfg@1a140000 {
+        compatible = "mediatek,generic-pciecfg", "syscon";
+        reg = <0x1a140000 0x1000>;
+    };
+...
diff --git a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
index 7468d666763a..57ae73462272 100644
--- a/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/mediatek-pcie.txt
@@ -8,7 +8,7 @@ Required properties:
 	"mediatek,mt7623-pcie"
 	"mediatek,mt7629-pcie"
 - device_type: Must be "pci"
-- reg: Base addresses and lengths of the PCIe subsys and root ports.
+- reg: Base addresses and lengths of the root ports.
 - reg-names: Names of the above areas to use during resource lookup.
 - #address-cells: Address representation for root ports (must be 3)
 - #size-cells: Size representation for root ports (must be 2)
@@ -47,9 +47,12 @@ Required properties for MT7623/MT2701:
 - reset-names: Must be "pcie-rst0", "pcie-rst1", "pcie-rstN".. based on the
   number of root ports.
 
-Required properties for MT2712/MT7622:
+Required properties for MT2712/MT7622/MT7629:
 -interrupts: A list of interrupt outputs of the controller, must have one
 	     entry for each PCIe port
+- interrupt-names: Must include the following entries:
+	- "pcie_irq": The interrupt that is asserted when an MSI/INTX is received
+- linux,pci-domain: PCI domain ID. Should be unique for each host controller
 
 In addition, the device tree node must have sub-nodes describing each
 PCIe port interface, having the following mandatory properties:
@@ -143,130 +146,143 @@ Examples for MT7623:
 
 Examples for MT2712:
 
-	pcie: pcie@11700000 {
+	pcie1: pcie@112ff000 {
 		compatible = "mediatek,mt2712-pcie";
 		device_type = "pci";
-		reg = <0 0x11700000 0 0x1000>,
-		      <0 0x112ff000 0 0x1000>;
-		reg-names = "port0", "port1";
+		reg = <0 0x112ff000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-			     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
-		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
-			 <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
-			 <&pericfg CLK_PERI_PCIE0>,
+		interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P1_SEL>,
 			 <&pericfg CLK_PERI_PCIE1>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+		clock-names = "sys_ck1", "ahb_ck1";
+		phys = <&u3port1 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy1";
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x11400000  0x0 0x11400000  0 0x300000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie0: pcie@11700000 {
+		compatible = "mediatek,mt2712-pcie";
+		device_type = "pci";
+		reg = <0 0x11700000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "pcie_irq";
+		clocks = <&topckgen CLK_TOP_PE2_MAC_P0_SEL>,
+			 <&pericfg CLK_PERI_PCIE0>;
+		clock-names = "sys_ck0", "ahb_ck0";
+		phys = <&u3port0 PHY_TYPE_PCIE>;
+		phy-names = "pcie-phy0";
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x20000000 0x0 0x20000000 0 0x10000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};
 
 Examples for MT7622:
 
-	pcie: pcie@1a140000 {
+	pcie0: pcie@1a143000 {
 		compatible = "mediatek,mt7622-pcie";
 		device_type = "pci";
-		reg = <0 0x1a140000 0 0x1000>,
-		      <0 0x1a143000 0 0x1000>,
-		      <0 0x1a145000 0 0x1000>;
-		reg-names = "subsys", "port0", "port1";
+		reg = <0 0x1a143000 0 0x1000>;
+		reg-names = "port0";
+		linux,pci-domain = <0>;
 		#address-cells = <3>;
 		#size-cells = <2>;
-		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>,
-			     <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_SPI 228 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
 		clocks = <&pciesys CLK_PCIE_P0_MAC_EN>,
-			 <&pciesys CLK_PCIE_P1_MAC_EN>,
 			 <&pciesys CLK_PCIE_P0_AHB_EN>,
-			 <&pciesys CLK_PCIE_P1_AHB_EN>,
 			 <&pciesys CLK_PCIE_P0_AUX_EN>,
-			 <&pciesys CLK_PCIE_P1_AUX_EN>,
 			 <&pciesys CLK_PCIE_P0_AXI_EN>,
-			 <&pciesys CLK_PCIE_P1_AXI_EN>,
 			 <&pciesys CLK_PCIE_P0_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
-			 <&pciesys CLK_PCIE_P0_PIPE_EN>,
-			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
-		clock-names = "sys_ck0", "sys_ck1", "ahb_ck0", "ahb_ck1",
-			      "aux_ck0", "aux_ck1", "axi_ck0", "axi_ck1",
-			      "obff_ck0", "obff_ck1", "pipe_ck0", "pipe_ck1";
-		phys = <&pcie0_phy PHY_TYPE_PCIE>, <&pcie1_phy PHY_TYPE_PCIE>;
-		phy-names = "pcie-phy0", "pcie-phy1";
+			 <&pciesys CLK_PCIE_P0_PIPE_EN>;
+		clock-names = "sys_ck0", "ahb_ck0", "aux_ck0",
+			      "axi_ck0", "obff_ck0", "pipe_ck0";
+
 		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
 		bus-range = <0x00 0xff>;
-		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x10000000>;
+		ranges = <0x82000000 0 0x20000000  0x0 0x20000000  0 0x8000000>;
+		status = "disabled";
 
-		pcie0: pcie@0,0 {
-			reg = <0x0000 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+				<0 0 0 2 &pcie_intc0 1>,
+				<0 0 0 3 &pcie_intc0 2>,
+				<0 0 0 4 &pcie_intc0 3>;
+		pcie_intc0: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
-					<0 0 0 2 &pcie_intc0 1>,
-					<0 0 0 3 &pcie_intc0 2>,
-					<0 0 0 4 &pcie_intc0 3>;
-			pcie_intc0: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
+	};
 
-		pcie1: pcie@1,0 {
-			reg = <0x0800 0 0 0 0>;
-			#address-cells = <3>;
-			#size-cells = <2>;
+	pcie1: pcie@1a145000 {
+		compatible = "mediatek,mt7622-pcie";
+		device_type = "pci";
+		reg = <0 0x1a145000 0 0x1000>;
+		reg-names = "port1";
+		linux,pci-domain = <1>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "pcie_irq";
+		clocks = <&pciesys CLK_PCIE_P1_MAC_EN>,
+			 /* designer has connect RC1 with p0_ahb clock */
+			 <&pciesys CLK_PCIE_P0_AHB_EN>,
+			 <&pciesys CLK_PCIE_P1_AUX_EN>,
+			 <&pciesys CLK_PCIE_P1_AXI_EN>,
+			 <&pciesys CLK_PCIE_P1_OBFF_EN>,
+			 <&pciesys CLK_PCIE_P1_PIPE_EN>;
+		clock-names = "sys_ck1", "ahb_ck1", "aux_ck1",
+			      "axi_ck1", "obff_ck1", "pipe_ck1";
+
+		power-domains = <&scpsys MT7622_POWER_DOMAIN_HIF0>;
+		bus-range = <0x00 0xff>;
+		ranges = <0x82000000 0 0x28000000  0x0 0x28000000  0 0x8000000>;
+		status = "disabled";
+
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie_intc1 0>,
+				<0 0 0 2 &pcie_intc1 1>,
+				<0 0 0 3 &pcie_intc1 2>,
+				<0 0 0 4 &pcie_intc1 3>;
+		pcie_intc1: interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
-			ranges;
-			interrupt-map-mask = <0 0 0 7>;
-			interrupt-map = <0 0 0 1 &pcie_intc1 0>,
-					<0 0 0 2 &pcie_intc1 1>,
-					<0 0 0 3 &pcie_intc1 2>,
-					<0 0 0 4 &pcie_intc1 3>;
-			pcie_intc1: interrupt-controller {
-				interrupt-controller;
-				#address-cells = <0>;
-				#interrupt-cells = <1>;
-			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/pci/pci-ep.yaml b/Documentation/devicetree/bindings/pci/pci-ep.yaml
index 7847bbcd4a03..ccec51ab5247 100644
--- a/Documentation/devicetree/bindings/pci/pci-ep.yaml
+++ b/Documentation/devicetree/bindings/pci/pci-ep.yaml
@@ -23,6 +23,13 @@ properties:
     default: 1
     maximum: 255
 
+  max-virtual-functions:
+    description: Array representing the number of virtual functions corresponding to each physical
+      function
+    $ref: /schemas/types.yaml#/definitions/uint8-array
+    minItems: 1
+    maxItems: 255
+
   max-link-speed:
     $ref: /schemas/types.yaml#/definitions/uint32
     enum: [ 1, 2, 3, 4 ]
diff --git a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
index 2d677e90a7e2..f56f8c58c5d9 100644
--- a/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
+++ b/Documentation/devicetree/bindings/pci/xilinx-nwl-pcie.txt
@@ -35,6 +35,7 @@ Required properties:
 
 Optional properties:
 - dma-coherent: present if DMA operations are coherent
+- clocks: Input clock specifier. Refer to common clock bindings
 
 Example:
 ++++++++
diff --git a/Documentation/devicetree/bindings/power/power-domain.yaml b/Documentation/devicetree/bindings/power/power-domain.yaml
index aed51e9dcb11..3143ed9a3313 100644
--- a/Documentation/devicetree/bindings/power/power-domain.yaml
+++ b/Documentation/devicetree/bindings/power/power-domain.yaml
@@ -46,7 +46,7 @@ properties:
       Phandles to the OPP tables of power domains provided by a power domain
       provider. If the provider provides a single power domain only or all
       the power domains provided by the provider have identical OPP tables,
-      then this shall contain a single phandle. Refer to ../opp/opp.txt
+      then this shall contain a single phandle. Refer to ../opp/opp-v2-base.yaml
       for more information.
 
   "#power-domain-cells":
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
deleted file mode 100644
index 0c0dc3a1e693..000000000000
--- a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-Qualcomm PON Device
-
-The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
-and resin along with the Android reboot-mode.
-
-This DT node has pwrkey and resin as sub nodes.
-
-Required Properties:
--compatible: Must be one of:
-	"qcom,pm8916-pon"
-	"qcom,pms405-pon"
-	"qcom,pm8998-pon"
-
--reg: Specifies the physical address of the pon register
-
-Optional subnode:
--pwrkey: Specifies the subnode pwrkey and should follow the
- qcom,pm8941-pwrkey.txt description.
--resin: Specifies the subnode resin and should follow the
- qcom,pm8xxx-pwrkey.txt description.
-
-The rest of the properties should follow the generic reboot-mode description
-found in reboot-mode.txt
-
-Example:
-
-	pon@800 {
-		compatible = "qcom,pm8916-pon";
-
-		reg = <0x800>;
-		mode-bootloader = <0x2>;
-		mode-recovery = <0x1>;
-
-		pwrkey {
-			compatible = "qcom,pm8941-pwrkey";
-			interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_POWER>;
-		};
-
-		resin {
-			compatible = "qcom,pm8941-resin";
-			interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
-			debounce = <15625>;
-			bias-pull-up;
-			linux,code = <KEY_VOLUMEDOWN>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
new file mode 100644
index 000000000000..353f155df0f4
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/power/reset/qcom,pon.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm PON Device
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey
+  and resin along with the Android reboot-mode.
+
+  This DT node has pwrkey and resin as sub nodes.
+
+allOf:
+  - $ref: reboot-mode.yaml#
+
+properties:
+  compatible:
+    enum:
+      - qcom,pm8916-pon
+      - qcom,pms405-pon
+      - qcom,pm8998-pon
+
+  reg:
+    maxItems: 1
+
+  pwrkey:
+    type: object
+    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+  resin:
+    type: object
+    $ref: "../../input/qcom,pm8941-pwrkey.yaml#"
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+   #include <dt-bindings/interrupt-controller/irq.h>
+   #include <dt-bindings/input/linux-event-codes.h>
+   #include <dt-bindings/spmi/spmi.h>
+   spmi_bus: spmi@c440000 {
+     reg = <0x0c440000 0x1100>;
+     #address-cells = <2>;
+     #size-cells = <0>;
+     pmk8350: pmic@0 {
+       reg = <0x0 SPMI_USID>;
+       #address-cells = <1>;
+       #size-cells = <0>;
+       pmk8350_pon: pon_hlos@1300 {
+         reg = <0x1300>;
+         compatible = "qcom,pm8998-pon";
+
+         pwrkey {
+            compatible = "qcom,pm8941-pwrkey";
+            interrupts = < 0x0 0x8 0 IRQ_TYPE_EDGE_BOTH >;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_POWER>;
+         };
+
+         resin {
+            compatible = "qcom,pm8941-resin";
+            interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+            debounce = <15625>;
+            bias-pull-up;
+            linux,code = <KEY_VOLUMEDOWN>;
+         };
+       };
+     };
+   };
+...
diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
index 9c6fda6b1dd9..ad0a0b95cec1 100644
--- a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
+++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml
@@ -36,7 +36,7 @@ patternProperties:
   "^mode-.*$":
     $ref: /schemas/types.yaml#/definitions/uint32
 
-additionalProperties: false
+additionalProperties: true
 
 examples:
   - |
diff --git a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
index 5596bee70509..81a54a4e8e3e 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
+++ b/Documentation/devicetree/bindings/pwm/pwm-rockchip.yaml
@@ -29,6 +29,7 @@ properties:
           - enum:
               - rockchip,px30-pwm
               - rockchip,rk3308-pwm
+              - rockchip,rk3568-pwm
           - const: rockchip,rk3328-pwm
 
   reg:
diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
index c597ccced623..0c112f3264a9 100644
--- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml
@@ -28,6 +28,7 @@ properties:
       - qcom,sc8180x-adsp-pas
       - qcom,sc8180x-cdsp-pas
       - qcom,sc8180x-mpss-pas
+      - qcom,sdm660-adsp-pas
       - qcom,sdm845-adsp-pas
       - qcom,sdm845-cdsp-pas
       - qcom,sdx55-mpss-pas
diff --git a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
index 7548d8714871..13925bb78ec7 100644
--- a/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
+++ b/Documentation/devicetree/bindings/rtc/trivial-rtc.yaml
@@ -32,6 +32,9 @@ properties:
       - dallas,ds3232
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
       - epson,rx8010
+      # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
+      - epson,rx8025
+      - epson,rx8035
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE with Battery Backed RAM
       - epson,rx8571
       # I2C-BUS INTERFACE REAL TIME CLOCK MODULE
diff --git a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
index 61802a11baf4..d370c98a62c7 100644
--- a/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
+++ b/Documentation/devicetree/bindings/sound/fsl,rpmsg.yaml
@@ -21,6 +21,7 @@ properties:
       - fsl,imx8mn-rpmsg-audio
       - fsl,imx8mm-rpmsg-audio
       - fsl,imx8mp-rpmsg-audio
+      - fsl,imx8ulp-rpmsg-audio
 
   model:
     $ref: /schemas/types.yaml#/definitions/string
diff --git a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
index 53e9434a6d9d..dcf790b053d2 100644
--- a/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
+++ b/Documentation/devicetree/bindings/sound/mt8195-afe-pcm.yaml
@@ -130,36 +130,34 @@ additionalProperties: false
 
 examples:
   - |
-    #include <dt-bindings/clock/mt8195-clk.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     #include <dt-bindings/interrupt-controller/irq.h>
-    #include <dt-bindings/power/mt8195-power.h>
 
     afe: mt8195-afe-pcm@10890000 {
         compatible = "mediatek,mt8195-audio";
         reg = <0x10890000 0x10000>;
         interrupts = <GIC_SPI 822 IRQ_TYPE_LEVEL_HIGH 0>;
         mediatek,topckgen = <&topckgen>;
-        power-domains = <&spm MT8195_POWER_DOMAIN_AUDIO>;
+        power-domains = <&spm 7>; //MT8195_POWER_DOMAIN_AUDIO
         clocks = <&clk26m>,
-                 <&topckgen CLK_TOP_APLL1>,
-                 <&topckgen CLK_TOP_APLL2>,
-                 <&topckgen CLK_TOP_APLL12_DIV0>,
-                 <&topckgen CLK_TOP_APLL12_DIV1>,
-                 <&topckgen CLK_TOP_APLL12_DIV2>,
-                 <&topckgen CLK_TOP_APLL12_DIV3>,
-                 <&topckgen CLK_TOP_APLL12_DIV9>,
-                 <&topckgen CLK_TOP_A1SYS_HP_SEL>,
-                 <&topckgen CLK_TOP_AUD_INTBUS_SEL>,
-                 <&topckgen CLK_TOP_AUDIO_H_SEL>,
-                 <&topckgen CLK_TOP_AUDIO_LOCAL_BUS_SEL>,
-                 <&topckgen CLK_TOP_DPTX_M_SEL>,
-                 <&topckgen CLK_TOP_I2SO1_M_SEL>,
-                 <&topckgen CLK_TOP_I2SO2_M_SEL>,
-                 <&topckgen CLK_TOP_I2SI1_M_SEL>,
-                 <&topckgen CLK_TOP_I2SI2_M_SEL>,
-                 <&infracfg_ao CLK_INFRA_AO_AUDIO_26M_B>,
-                 <&scp_adsp CLK_SCP_ADSP_AUDIODSP>;
+                 <&topckgen 163>, //CLK_TOP_APLL1
+                 <&topckgen 166>, //CLK_TOP_APLL2
+                 <&topckgen 233>, //CLK_TOP_APLL12_DIV0
+                 <&topckgen 234>, //CLK_TOP_APLL12_DIV1
+                 <&topckgen 235>, //CLK_TOP_APLL12_DIV2
+                 <&topckgen 236>, //CLK_TOP_APLL12_DIV3
+                 <&topckgen 238>, //CLK_TOP_APLL12_DIV9
+                 <&topckgen 100>, //CLK_TOP_A1SYS_HP_SEL
+                 <&topckgen 33>, //CLK_TOP_AUD_INTBUS_SEL
+                 <&topckgen 34>, //CLK_TOP_AUDIO_H_SEL
+                 <&topckgen 107>, //CLK_TOP_AUDIO_LOCAL_BUS_SEL
+                 <&topckgen 98>, //CLK_TOP_DPTX_M_SEL
+                 <&topckgen 94>, //CLK_TOP_I2SO1_M_SEL
+                 <&topckgen 95>, //CLK_TOP_I2SO2_M_SEL
+                 <&topckgen 96>, //CLK_TOP_I2SI1_M_SEL
+                 <&topckgen 97>, //CLK_TOP_I2SI2_M_SEL
+                 <&infracfg_ao 50>, //CLK_INFRA_AO_AUDIO_26M_B
+                 <&scp_adsp 0>; //CLK_SCP_ADSP_AUDIODSP
         clock-names = "clk26m",
                       "apll1_ck",
                       "apll2_ck",
diff --git a/Documentation/devicetree/bindings/spi/omap-spi.yaml b/Documentation/devicetree/bindings/spi/omap-spi.yaml
index e55538186cf6..9952199cae11 100644
--- a/Documentation/devicetree/bindings/spi/omap-spi.yaml
+++ b/Documentation/devicetree/bindings/spi/omap-spi.yaml
@@ -84,9 +84,9 @@ unevaluatedProperties: false
 if:
   properties:
     compatible:
-      oneOf:
-        - const: ti,omap2-mcspi
-        - const: ti,omap4-mcspi
+      enum:
+        - ti,omap2-mcspi
+        - ti,omap4-mcspi
 
 then:
   properties:
diff --git a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
index 593f7693bace..03e5dca7e933 100644
--- a/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
+++ b/Documentation/devicetree/bindings/spi/spi-xilinx.yaml
@@ -27,13 +27,11 @@ properties:
 
   xlnx,num-ss-bits:
     description: Number of chip selects used.
-    $ref: /schemas/types.yaml#/definitions/uint32
     minimum: 1
     maximum: 32
 
   xlnx,num-transfer-bits:
     description: Number of bits per transfer. This will be 8 if not specified.
-    $ref: /schemas/types.yaml#/definitions/uint32
     enum: [8, 16, 32]
     default: 8
 
diff --git a/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
new file mode 100644
index 000000000000..289e9a845600
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom-lmh.yaml
@@ -0,0 +1,82 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright 2021 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom-lmh.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Limits Management Hardware(LMh)
+
+maintainers:
+  - Thara Gopinath <thara.gopinath@linaro.org>
+
+description:
+  Limits Management Hardware(LMh) is a hardware infrastructure on some
+  Qualcomm SoCs that can enforce temperature and current limits as
+  programmed by software for certain IPs like CPU.
+
+properties:
+  compatible:
+    enum:
+      - qcom,sdm845-lmh
+
+  reg:
+    items:
+      - description: core registers
+
+  interrupts:
+    maxItems: 1
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  cpus:
+    description:
+      phandle of the first cpu in the LMh cluster
+    $ref: /schemas/types.yaml#/definitions/phandle
+
+  qcom,lmh-temp-arm-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the LMh thermal
+      FSM is engaged.
+
+  qcom,lmh-temp-low-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to remove frequency throttling.
+
+  qcom,lmh-temp-high-millicelsius:
+    description:
+      An integer expressing temperature threshold at which the state machine
+      will attempt to throttle the frequency.
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#interrupt-cells'
+  - interrupt-controller
+  - cpus
+  - qcom,lmh-temp-arm-millicelsius
+  - qcom,lmh-temp-low-millicelsius
+  - qcom,lmh-temp-high-millicelsius
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    lmh@17d70800 {
+      compatible = "qcom,sdm845-lmh";
+      reg = <0x17d70800 0x400>;
+      interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+      cpus = <&CPU4>;
+      qcom,lmh-temp-arm-millicelsius = <65000>;
+      qcom,lmh-temp-low-millicelsius = <94500>;
+      qcom,lmh-temp-high-millicelsius = <95000>;
+      interrupt-controller;
+      #interrupt-cells = <1>;
+    };
diff --git a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
index 164f71598c59..a07de5ed0ca6 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-zones.yaml
@@ -215,7 +215,7 @@ patternProperties:
       - polling-delay
       - polling-delay-passive
       - thermal-sensors
-      - trips
+
     additionalProperties: false
 
 additionalProperties: false
diff --git a/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
new file mode 100644
index 000000000000..ab9641e845db
--- /dev/null
+++ b/Documentation/devicetree/bindings/watchdog/maxim,max63xx.yaml
@@ -0,0 +1,44 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/watchdog/maxim,max63xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Maxim 63xx Watchdog Timers
+
+allOf:
+  - $ref: "watchdog.yaml#"
+
+maintainers:
+  - Marc Zyngier <maz@kernel.org>
+  - Linus Walleij <linus.walleij@linaro.org>
+
+properties:
+  compatible:
+    enum:
+      - maxim,max6369
+      - maxim,max6370
+      - maxim,max6371
+      - maxim,max6372
+      - maxim,max6373
+      - maxim,max6374
+
+  reg:
+    description: This is a 1-byte memory-mapped address
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    wdt: watchdog@50000000 {
+        compatible = "maxim,max6369";
+        reg = <0x50000000 0x1>;
+        timeout-sec = <10>;
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 416d716403f6..a4e31ce96e0e 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -13,6 +13,7 @@ Required properties:
 	"mediatek,mt7622-wdt", "mediatek,mt6589-wdt": for MT7622
 	"mediatek,mt7623-wdt", "mediatek,mt6589-wdt": for MT7623
 	"mediatek,mt7629-wdt", "mediatek,mt6589-wdt": for MT7629
+	"mediatek,mt7986-wdt", "mediatek,mt6589-wdt": for MT7986
 	"mediatek,mt8183-wdt": for MT8183
 	"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
 	"mediatek,mt8192-wdt": for MT8192
diff --git a/Documentation/driver-api/cxl/memory-devices.rst b/Documentation/driver-api/cxl/memory-devices.rst
index 487ce4f41d77..50ebcda17ad0 100644
--- a/Documentation/driver-api/cxl/memory-devices.rst
+++ b/Documentation/driver-api/cxl/memory-devices.rst
@@ -36,9 +36,15 @@ CXL Core
 .. kernel-doc:: drivers/cxl/cxl.h
    :internal:
 
-.. kernel-doc:: drivers/cxl/core.c
+.. kernel-doc:: drivers/cxl/core/bus.c
    :doc: cxl core
 
+.. kernel-doc:: drivers/cxl/core/pmem.c
+   :doc: cxl pmem
+
+.. kernel-doc:: drivers/cxl/core/regs.c
+   :doc: cxl registers
+
 External Interfaces
 ===================
 
diff --git a/Documentation/driver-api/gpio/consumer.rst b/Documentation/driver-api/gpio/consumer.rst
index 3366a991b4aa..47869ca8ccf0 100644
--- a/Documentation/driver-api/gpio/consumer.rst
+++ b/Documentation/driver-api/gpio/consumer.rst
@@ -72,6 +72,10 @@ for the GPIO. Values can be:
 * GPIOD_OUT_HIGH_OPEN_DRAIN same as GPIOD_OUT_HIGH but also enforce the line
   to be electrically used with open drain.
 
+Note that the initial value is *logical* and the physical line level depends on
+whether the line is configured active high or active low (see
+:ref:`active_low_semantics`).
+
 The two last flags are used for use cases where open drain is mandatory, such
 as I2C: if the line is not already configured as open drain in the mappings
 (see board.txt), then open drain will be enforced anyway and a warning will be
@@ -252,6 +256,8 @@ that can't be accessed from hardIRQ handlers, these calls act the same as the
 spinlock-safe calls.
 
 
+.. _active_low_semantics:
+
 The active low and open drain semantics
 ---------------------------------------
 As a consumer should not have to care about the physical line level, all of the
@@ -309,9 +315,11 @@ work on the raw line value::
 	void gpiod_set_raw_value_cansleep(struct gpio_desc *desc, int value)
 	int gpiod_direction_output_raw(struct gpio_desc *desc, int value)
 
-The active low state of a GPIO can also be queried using the following call::
+The active low state of a GPIO can also be queried and toggled using the
+following calls::
 
 	int gpiod_is_active_low(const struct gpio_desc *desc)
+	void gpiod_toggle_active_low(struct gpio_desc *desc)
 
 Note that these functions should only be used with great moderation; a driver
 should not have to care about the physical line level or open drain semantics.
diff --git a/Documentation/driver-api/gpio/driver.rst b/Documentation/driver-api/gpio/driver.rst
index d6b0d779859b..bbc53920d4dd 100644
--- a/Documentation/driver-api/gpio/driver.rst
+++ b/Documentation/driver-api/gpio/driver.rst
@@ -547,13 +547,10 @@ To use the helpers please keep the following in mind:
   the irqchip can initialize. E.g. .dev and .can_sleep shall be set up
   properly.
 
-- Nominally set all handlers to handle_bad_irq() in the setup call and pass
-  handle_bad_irq() as flow handler parameter in gpiochip_irqchip_add() if it is
-  expected for GPIO driver that irqchip .set_type() callback will be called
-  before using/enabling each GPIO IRQ. Then set the handler to
-  handle_level_irq() and/or handle_edge_irq() in the irqchip .set_type()
-  callback depending on what your controller supports and what is requested
-  by the consumer.
+- Nominally set gpio_irq_chip.handler to handle_bad_irq. Then, if your irqchip
+  is cascaded, set the handler to handle_level_irq() and/or handle_edge_irq()
+  in the irqchip .set_type() callback depending on what your controller
+  supports and what is requested by the consumer.
 
 
 Locking IRQ usage
diff --git a/Documentation/features/vm/huge-vmap/arch-support.txt b/Documentation/features/vm/huge-vmap/arch-support.txt
index 439fd9069b8b..bc53905a0306 100644
--- a/Documentation/features/vm/huge-vmap/arch-support.txt
+++ b/Documentation/features/vm/huge-vmap/arch-support.txt
@@ -1,7 +1,7 @@
 #
 # Feature name:          huge-vmap
 #         Kconfig:       HAVE_ARCH_HUGE_VMAP
-#         description:   arch supports the ioremap_pud_enabled() and ioremap_pmd_enabled() VM APIs
+#         description:   arch supports the arch_vmap_pud_supported() and arch_vmap_pmd_supported() VM APIs
 #
     -----------------------
     |         arch |status|
diff --git a/Documentation/filesystems/api-summary.rst b/Documentation/filesystems/api-summary.rst
index 7e5c04c98619..98db2ea5fa12 100644
--- a/Documentation/filesystems/api-summary.rst
+++ b/Documentation/filesystems/api-summary.rst
@@ -71,9 +71,6 @@ Other Functions
 .. kernel-doc:: fs/fs-writeback.c
    :export:
 
-.. kernel-doc:: fs/block_dev.c
-   :export:
-
 .. kernel-doc:: fs/anon_inodes.c
    :export:
 
diff --git a/Documentation/gpu/drm-mm.rst b/Documentation/gpu/drm-mm.rst
index d5a73fa2c9ef..8126beadc7df 100644
--- a/Documentation/gpu/drm-mm.rst
+++ b/Documentation/gpu/drm-mm.rst
@@ -37,7 +37,7 @@ TTM initialization
     This section is outdated.
 
 Drivers wishing to support TTM must pass a filled :c:type:`ttm_bo_driver
-<ttm_bo_driver>` structure to ttm_bo_device_init, together with an
+<ttm_bo_driver>` structure to ttm_device_init, together with an
 initialized global reference to the memory manager.  The ttm_bo_driver
 structure contains several fields with function pointers for
 initializing the TTM, allocating and freeing memory, waiting for command
diff --git a/Documentation/kbuild/llvm.rst b/Documentation/kbuild/llvm.rst
index e87ed5479963..d32616891dcf 100644
--- a/Documentation/kbuild/llvm.rst
+++ b/Documentation/kbuild/llvm.rst
@@ -130,9 +130,10 @@ Getting Help
 ------------
 
 - `Website <https://clangbuiltlinux.github.io/>`_
-- `Mailing List <https://groups.google.com/forum/#!forum/clang-built-linux>`_: <clang-built-linux@googlegroups.com>
+- `Mailing List <https://lore.kernel.org/llvm/>`_: <llvm@lists.linux.dev>
+- `Old Mailing List Archives <https://groups.google.com/g/clang-built-linux>`_
 - `Issue Tracker <https://github.com/ClangBuiltLinux/linux/issues>`_
-- IRC: #clangbuiltlinux on chat.freenode.net
+- IRC: #clangbuiltlinux on irc.libera.chat
 - `Telegram <https://t.me/ClangBuiltLinux>`_: @ClangBuiltLinux
 - `Wiki <https://github.com/ClangBuiltLinux/linux/wiki>`_
 - `Beginner Bugs <https://github.com/ClangBuiltLinux/linux/issues?q=is%3Aopen+is%3Aissue+label%3A%22good+first+issue%22>`_
diff --git a/Documentation/kernel-hacking/hacking.rst b/Documentation/kernel-hacking/hacking.rst
index df65c19aa7df..55bd37a2efb0 100644
--- a/Documentation/kernel-hacking/hacking.rst
+++ b/Documentation/kernel-hacking/hacking.rst
@@ -76,8 +76,8 @@ handler is never re-entered: if the same interrupt arrives, it is queued
 fast: frequently it simply acknowledges the interrupt, marks a 'software
 interrupt' for execution and exits.
 
-You can tell you are in a hardware interrupt, because
-:c:func:`in_irq()` returns true.
+You can tell you are in a hardware interrupt, because in_hardirq() returns
+true.
 
 .. warning::
 
diff --git a/Documentation/kernel-hacking/locking.rst b/Documentation/kernel-hacking/locking.rst
index ed1284c6f078..90bc3f51eda9 100644
--- a/Documentation/kernel-hacking/locking.rst
+++ b/Documentation/kernel-hacking/locking.rst
@@ -94,16 +94,10 @@ primitives, but I'll pretend they don't exist.
 Locking in the Linux Kernel
 ===========================
 
-If I could give you one piece of advice: never sleep with anyone crazier
-than yourself. But if I had to give you advice on locking: **keep it
-simple**.
+If I could give you one piece of advice on locking: **keep it simple**.
 
 Be reluctant to introduce new locks.
 
-Strangely enough, this last one is the exact reverse of my advice when
-you **have** slept with someone crazier than yourself. And you should
-think about getting a big dog.
-
 Two Main Types of Kernel Locks: Spinlocks and Mutexes
 -----------------------------------------------------
 
@@ -1406,7 +1400,7 @@ bh
   half will be running at any time.
 
 Hardware Interrupt / Hardware IRQ
-  Hardware interrupt request. in_irq() returns true in a
+  Hardware interrupt request. in_hardirq() returns true in a
   hardware interrupt handler.
 
 Interrupt Context
@@ -1418,7 +1412,7 @@ SMP
   (``CONFIG_SMP=y``).
 
 Software Interrupt / softirq
-  Software interrupt handler. in_irq() returns false;
+  Software interrupt handler. in_hardirq() returns false;
   in_softirq() returns true. Tasklets and softirqs both
   fall into the category of 'software interrupts'.
 
diff --git a/Documentation/locking/futex-requeue-pi.rst b/Documentation/locking/futex-requeue-pi.rst
index 14ab5787b9a7..dd4ecf4528a4 100644
--- a/Documentation/locking/futex-requeue-pi.rst
+++ b/Documentation/locking/futex-requeue-pi.rst
@@ -5,7 +5,7 @@ Futex Requeue PI
 Requeueing of tasks from a non-PI futex to a PI futex requires
 special handling in order to ensure the underlying rt_mutex is never
 left without an owner if it has waiters; doing so would break the PI
-boosting logic [see rt-mutex-desgin.txt] For the purposes of
+boosting logic [see rt-mutex-design.rst] For the purposes of
 brevity, this action will be referred to as "requeue_pi" throughout
 this document.  Priority inheritance is abbreviated throughout as
 "PI".
diff --git a/Documentation/locking/ww-mutex-design.rst b/Documentation/locking/ww-mutex-design.rst
index 54d9c17bb66b..6a4d7319f8f0 100644
--- a/Documentation/locking/ww-mutex-design.rst
+++ b/Documentation/locking/ww-mutex-design.rst
@@ -2,7 +2,7 @@
 Wound/Wait Deadlock-Proof Mutex Design
 ======================================
 
-Please read mutex-design.txt first, as it applies to wait/wound mutexes too.
+Please read mutex-design.rst first, as it applies to wait/wound mutexes too.
 
 Motivation for WW-Mutexes
 -------------------------
diff --git a/Documentation/networking/nf_conntrack-sysctl.rst b/Documentation/networking/nf_conntrack-sysctl.rst
index 34ca762ea56f..311128abb768 100644
--- a/Documentation/networking/nf_conntrack-sysctl.rst
+++ b/Documentation/networking/nf_conntrack-sysctl.rst
@@ -17,9 +17,8 @@ nf_conntrack_acct - BOOLEAN
 nf_conntrack_buckets - INTEGER
 	Size of hash table. If not specified as parameter during module
 	loading, the default size is calculated by dividing total memory
-	by 16384 to determine the number of buckets but the hash table will
-	never have fewer than 32 and limited to 16384 buckets. For systems
-	with more than 4GB of memory it will be 65536 buckets.
+	by 16384 to determine the number of buckets. The hash table will
+	never have fewer than 1024 and never more than 262144 buckets.
 	This sysctl is only writeable in the initial net namespace.
 
 nf_conntrack_checksum - BOOLEAN
@@ -100,8 +99,12 @@ nf_conntrack_log_invalid - INTEGER
 	Log invalid packets of a type specified by value.
 
 nf_conntrack_max - INTEGER
-	Size of connection tracking table.  Default value is
-	nf_conntrack_buckets value * 4.
+        Maximum number of allowed connection tracking entries. This value is set
+        to nf_conntrack_buckets by default.
+        Note that connection tracking entries are added to the table twice -- once
+        for the original direction and once for the reply direction (i.e., with
+        the reversed address). This means that with default settings a maxed-out
+        table will have a average hash chain length of 2, not 1.
 
 nf_conntrack_tcp_be_liberal - BOOLEAN
 	- 0 - disabled (default)
diff --git a/Documentation/power/energy-model.rst b/Documentation/power/energy-model.rst
index 60ac091d3b0d..8a2788afe89b 100644
--- a/Documentation/power/energy-model.rst
+++ b/Documentation/power/energy-model.rst
@@ -101,8 +101,7 @@ subsystems which use EM might rely on this flag to check if all EM devices use
 the same scale. If there are different scales, these subsystems might decide
 to: return warning/error, stop working or panic.
 See Section 3. for an example of driver implementing this
-callback, and kernel/power/energy_model.c for further documentation on this
-API.
+callback, or Section 2.4 for further documentation on this API
 
 
 2.3 Accessing performance domains
@@ -123,7 +122,17 @@ em_cpu_energy() API. The estimation is performed assuming that the schedutil
 CPUfreq governor is in use in case of CPU device. Currently this calculation is
 not provided for other type of devices.
 
-More details about the above APIs can be found in include/linux/energy_model.h.
+More details about the above APIs can be found in ``<linux/energy_model.h>``
+or in Section 2.4
+
+
+2.4 Description details of this API
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+.. kernel-doc:: include/linux/energy_model.h
+   :internal:
+
+.. kernel-doc:: kernel/power/energy_model.c
+   :export:
 
 
 3. Example driver
diff --git a/Documentation/process/applying-patches.rst b/Documentation/process/applying-patches.rst
index 2e7017bef4b8..c2121c1e55d7 100644
--- a/Documentation/process/applying-patches.rst
+++ b/Documentation/process/applying-patches.rst
@@ -389,7 +389,7 @@ The -mm patches are experimental patches released by Andrew Morton.
 
 In the past, -mm tree were used to also test subsystem patches, but this
 function is now done via the
-`linux-next <https://www.kernel.org/doc/man-pages/linux-next.html>`
+`linux-next` (https://www.kernel.org/doc/man-pages/linux-next.html)
 tree. The Subsystem maintainers push their patches first to linux-next,
 and, during the merge window, sends them directly to Linus.
 
diff --git a/Documentation/process/kernel-docs.rst b/Documentation/process/kernel-docs.rst
index 22d9ace5df2a..da9527502ef0 100644
--- a/Documentation/process/kernel-docs.rst
+++ b/Documentation/process/kernel-docs.rst
@@ -126,15 +126,17 @@ On-line docs
         describes how to write user-mode utilities for communicating with
         Card Services.
 
-    * Title: **Linux Kernel Module Programming Guide**
+    * Title: **The Linux Kernel Module Programming Guide**
 
-      :Author: Ori Pomerantz.
-      :URL: https://tldp.org/LDP/lkmpg/2.6/html/index.html
-      :Date: 2001
+      :Author: Peter Jay Salzman, Michael Burian, Ori Pomerantz, Bob Mottram,
+        Jim Huang.
+      :URL: https://sysprog21.github.io/lkmpg/
+      :Date: 2021
       :Keywords: modules, GPL book, /proc, ioctls, system calls,
         interrupt handlers .
-      :Description: Very nice 92 pages GPL book on the topic of modules
-        programming. Lots of examples.
+      :Description: A very nice GPL book on the topic of modules
+        programming. Lots of examples. Currently the new version is being
+        actively maintained at https://github.com/sysprog21/lkmpg.
 
     * Title: **Global spinlock list and usage**
 
diff --git a/Documentation/process/maintainer-pgp-guide.rst b/Documentation/process/maintainer-pgp-guide.rst
index 8f8f1fee92b8..29e7d7b1cd44 100644
--- a/Documentation/process/maintainer-pgp-guide.rst
+++ b/Documentation/process/maintainer-pgp-guide.rst
@@ -944,12 +944,11 @@ have on your keyring::
     uid           [ unknown] Linus Torvalds <torvalds@kernel.org>
     sub   rsa2048 2011-09-20 [E]
 
-Next, open the `PGP pathfinder`_. In the "From" field, paste the key
-fingerprint of Linus Torvalds from the output above. In the "To" field,
-paste the key-id you found via ``gpg --search`` of the unknown key, and
-check the results:
-
-- `Finding paths to Linus`_
+Next, find a trust path from Linus Torvalds to the key-id you found via ``gpg
+--search`` of the unknown key.  For this, you can use several tools including
+https://github.com/mricon/wotmate,
+https://git.kernel.org/pub/scm/docs/kernel/pgpkeys.git/tree/graphs, and
+https://the.earth.li/~noodles/pathfind.html.
 
 If you get a few decent trust paths, then it's a pretty good indication
 that it is a valid key. You can add it to your keyring from the
@@ -962,6 +961,3 @@ administrators of the PGP Pathfinder service to not be malicious (in
 fact, this goes against :ref:`devs_not_infra`). However, if you
 do not carefully maintain your own web of trust, then it is a marked
 improvement over blindly trusting keyservers.
-
-.. _`PGP pathfinder`: https://pgp.cs.uu.nl/
-.. _`Finding paths to Linus`: https://pgp.cs.uu.nl/paths/79BE3E4300411886/to/C94035C21B4F2AEB.html
diff --git a/Documentation/trace/boottime-trace.rst b/Documentation/trace/boottime-trace.rst
index 8053898cfeb4..6dcfbc64014d 100644
--- a/Documentation/trace/boottime-trace.rst
+++ b/Documentation/trace/boottime-trace.rst
@@ -125,6 +125,71 @@ Note that kprobe and synthetic event definitions can be written under
 instance node, but those are also visible from other instances. So please
 take care for event name conflict.
 
+Ftrace Histogram Options
+------------------------
+
+Since it is too long to write a histogram action as a string for per-event
+action option, there are tree-style options under per-event 'hist' subkey
+for the histogram actions. For the detail of the each parameter,
+please read the event histogram document [3]_.
+
+.. [3] See :ref:`Documentation/trace/histogram.rst <histogram>`
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]keys = KEY1[, KEY2[...]]
+  Set histogram key parameters. (Mandatory)
+  The 'N' is a digit string for the multiple histogram. You can omit it
+  if there is one histogram on the event.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]values = VAL1[, VAL2[...]]
+  Set histogram value parameters.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]sort = SORT1[, SORT2[...]]
+  Set histogram sort parameter options.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]size = NR_ENTRIES
+  Set histogram size (number of entries).
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]name = NAME
+  Set histogram name.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]var.VARIABLE = EXPR
+  Define a new VARIABLE by EXPR expression.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]<pause|continue|clear>
+  Set histogram control parameter. You can set one of them.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]onmatch.[M.]event = GROUP.EVENT
+  Set histogram 'onmatch' handler matching event parameter.
+  The 'M' is a digit string for the multiple 'onmatch' handler. You can omit it
+  if there is one 'onmatch' handler on this histogram.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]onmatch.[M.]trace = EVENT[, ARG1[...]]
+  Set histogram 'trace' action for 'onmatch'.
+  EVENT must be a synthetic event name, and ARG1... are parameters
+  for that event. Mandatory if 'onmatch.event' option is set.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]onmax.[M.]var = VAR
+  Set histogram 'onmax' handler variable parameter.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]onchange.[M.]var = VAR
+  Set histogram 'onchange' handler variable parameter.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]<onmax|onchange>.[M.]save = ARG1[, ARG2[...]]
+  Set histogram 'save' action parameters for 'onmax' or 'onchange' handler.
+  This option or below 'snapshot' option is mandatory if 'onmax.var' or
+  'onchange.var' option is set.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.[N.]<onmax|onchange>.[M.]snapshot
+  Set histogram 'snapshot' action for 'onmax' or 'onchange' handler.
+  This option or above 'save' option is mandatory if 'onmax.var' or
+  'onchange.var' option is set.
+
+ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist.filter = FILTER_EXPR
+  Set histogram filter expression. You don't need 'if' in the FILTER_EXPR.
+
+Note that this 'hist' option can conflict with the per-event 'actions'
+option if the 'actions' option has a histogram action.
+
 
 When to Start
 =============
@@ -159,13 +224,23 @@ below::
         }
         synthetic.initcall_latency {
                 fields = "unsigned long func", "u64 lat"
-                actions = "hist:keys=func.sym,lat:vals=lat:sort=lat"
+                hist {
+                        keys = func.sym, lat
+                        values = lat
+                        sort = lat
+                }
         }
-        initcall.initcall_start {
-                actions = "hist:keys=func:ts0=common_timestamp.usecs"
+        initcall.initcall_start.hist {
+                keys = func
+                var.ts0 = common_timestamp.usecs
         }
-        initcall.initcall_finish {
-                actions = "hist:keys=func:lat=common_timestamp.usecs-$ts0:onmatch(initcall.initcall_start).initcall_latency(func,$lat)"
+        initcall.initcall_finish.hist {
+                keys = func
+                var.lat = common_timestamp.usecs - $ts0
+                onmatch {
+                        event = initcall.initcall_start
+                        trace = initcall_latency, func, $lat
+                }
         }
   }
 
diff --git a/Documentation/trace/histogram.rst b/Documentation/trace/histogram.rst
index f99be8062bc8..533415644c54 100644
--- a/Documentation/trace/histogram.rst
+++ b/Documentation/trace/histogram.rst
@@ -70,15 +70,16 @@ Documentation written by Tom Zanussi
   modified by appending any of the following modifiers to the field
   name:
 
-	=========== ==========================================
-        .hex        display a number as a hex value
-	.sym        display an address as a symbol
-	.sym-offset display an address as a symbol and offset
-	.syscall    display a syscall id as a system call name
-	.execname   display a common_pid as a program name
-	.log2       display log2 value rather than raw number
-	.usecs      display a common_timestamp in microseconds
-	=========== ==========================================
+	=============  =================================================
+        .hex           display a number as a hex value
+	.sym           display an address as a symbol
+	.sym-offset    display an address as a symbol and offset
+	.syscall       display a syscall id as a system call name
+	.execname      display a common_pid as a program name
+	.log2          display log2 value rather than raw number
+	.buckets=size  display grouping of values rather than raw number
+	.usecs         display a common_timestamp in microseconds
+	=============  =================================================
 
   Note that in general the semantics of a given field aren't
   interpreted when applying a modifier to it, but there are some
@@ -228,7 +229,7 @@ Extended error information
   that lists the total number of bytes requested for each function in
   the kernel that made one or more calls to kmalloc::
 
-    # echo 'hist:key=call_site:val=bytes_req' > \
+    # echo 'hist:key=call_site:val=bytes_req.buckets=32' > \
             /sys/kernel/debug/tracing/events/kmem/kmalloc/trigger
 
   This tells the tracing system to create a 'hist' trigger using the
@@ -1823,20 +1824,99 @@ and variables defined on other events (see Section 2.2.3 below on
 how that is done using hist trigger 'onmatch' action). Once that is
 done, the 'wakeup_latency' synthetic event instance is created.
 
-A histogram can now be defined for the new synthetic event::
-
-  # echo 'hist:keys=pid,prio,lat.log2:sort=pid,lat' >> \
-        /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
-
 The new event is created under the tracing/events/synthetic/ directory
 and looks and behaves just like any other event::
 
   # ls /sys/kernel/debug/tracing/events/synthetic/wakeup_latency
         enable  filter  format  hist  id  trigger
 
+A histogram can now be defined for the new synthetic event::
+
+  # echo 'hist:keys=pid,prio,lat.log2:sort=lat' >> \
+        /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
+
+The above shows the latency "lat" in a power of 2 grouping.
+
 Like any other event, once a histogram is enabled for the event, the
 output can be displayed by reading the event's 'hist' file.
 
+  # cat /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/hist
+
+  # event histogram
+  #
+  # trigger info: hist:keys=pid,prio,lat.log2:vals=hitcount:sort=lat.log2:size=2048 [active]
+  #
+
+  { pid:       2035, prio:          9, lat: ~ 2^2  } hitcount:         43
+  { pid:       2034, prio:          9, lat: ~ 2^2  } hitcount:         60
+  { pid:       2029, prio:          9, lat: ~ 2^2  } hitcount:        965
+  { pid:       2034, prio:        120, lat: ~ 2^2  } hitcount:          9
+  { pid:       2033, prio:        120, lat: ~ 2^2  } hitcount:          5
+  { pid:       2030, prio:          9, lat: ~ 2^2  } hitcount:        335
+  { pid:       2030, prio:        120, lat: ~ 2^2  } hitcount:         10
+  { pid:       2032, prio:        120, lat: ~ 2^2  } hitcount:          1
+  { pid:       2035, prio:        120, lat: ~ 2^2  } hitcount:          2
+  { pid:       2031, prio:          9, lat: ~ 2^2  } hitcount:        176
+  { pid:       2028, prio:        120, lat: ~ 2^2  } hitcount:         15
+  { pid:       2033, prio:          9, lat: ~ 2^2  } hitcount:         91
+  { pid:       2032, prio:          9, lat: ~ 2^2  } hitcount:        125
+  { pid:       2029, prio:        120, lat: ~ 2^2  } hitcount:          4
+  { pid:       2031, prio:        120, lat: ~ 2^2  } hitcount:          3
+  { pid:       2029, prio:        120, lat: ~ 2^3  } hitcount:          2
+  { pid:       2035, prio:          9, lat: ~ 2^3  } hitcount:         41
+  { pid:       2030, prio:        120, lat: ~ 2^3  } hitcount:          1
+  { pid:       2032, prio:          9, lat: ~ 2^3  } hitcount:         32
+  { pid:       2031, prio:          9, lat: ~ 2^3  } hitcount:         44
+  { pid:       2034, prio:          9, lat: ~ 2^3  } hitcount:         40
+  { pid:       2030, prio:          9, lat: ~ 2^3  } hitcount:         29
+  { pid:       2033, prio:          9, lat: ~ 2^3  } hitcount:         31
+  { pid:       2029, prio:          9, lat: ~ 2^3  } hitcount:         31
+  { pid:       2028, prio:        120, lat: ~ 2^3  } hitcount:         18
+  { pid:       2031, prio:        120, lat: ~ 2^3  } hitcount:          2
+  { pid:       2028, prio:        120, lat: ~ 2^4  } hitcount:          1
+  { pid:       2029, prio:          9, lat: ~ 2^4  } hitcount:          4
+  { pid:       2031, prio:        120, lat: ~ 2^7  } hitcount:          1
+  { pid:       2032, prio:        120, lat: ~ 2^7  } hitcount:          1
+
+  Totals:
+      Hits: 2122
+      Entries: 30
+      Dropped: 0
+
+
+The latency values can also be grouped linearly by a given size with
+the ".buckets" modifier and specify a size (in this case groups of 10).
+
+  # echo 'hist:keys=pid,prio,lat.buckets=10:sort=lat' >> \
+        /sys/kernel/debug/tracing/events/synthetic/wakeup_latency/trigger
+
+  # event histogram
+  #
+  # trigger info: hist:keys=pid,prio,lat.buckets=10:vals=hitcount:sort=lat.buckets=10:size=2048 [active]
+  #
+
+  { pid:       2067, prio:          9, lat: ~ 0-9 } hitcount:        220
+  { pid:       2068, prio:          9, lat: ~ 0-9 } hitcount:        157
+  { pid:       2070, prio:          9, lat: ~ 0-9 } hitcount:        100
+  { pid:       2067, prio:        120, lat: ~ 0-9 } hitcount:          6
+  { pid:       2065, prio:        120, lat: ~ 0-9 } hitcount:          2
+  { pid:       2066, prio:        120, lat: ~ 0-9 } hitcount:          2
+  { pid:       2069, prio:          9, lat: ~ 0-9 } hitcount:        122
+  { pid:       2069, prio:        120, lat: ~ 0-9 } hitcount:          8
+  { pid:       2070, prio:        120, lat: ~ 0-9 } hitcount:          1
+  { pid:       2068, prio:        120, lat: ~ 0-9 } hitcount:          7
+  { pid:       2066, prio:          9, lat: ~ 0-9 } hitcount:        365
+  { pid:       2064, prio:        120, lat: ~ 0-9 } hitcount:         35
+  { pid:       2065, prio:          9, lat: ~ 0-9 } hitcount:        998
+  { pid:       2071, prio:          9, lat: ~ 0-9 } hitcount:         85
+  { pid:       2065, prio:          9, lat: ~ 10-19 } hitcount:          2
+  { pid:       2064, prio:        120, lat: ~ 10-19 } hitcount:          2
+
+  Totals:
+      Hits: 2112
+      Entries: 16
+      Dropped: 0
+
 2.2.3 Hist trigger 'handlers' and 'actions'
 -------------------------------------------
 
diff --git a/Documentation/translations/it_IT/kernel-hacking/hacking.rst b/Documentation/translations/it_IT/kernel-hacking/hacking.rst
index b4ea00f1b583..d5c521327f6a 100644
--- a/Documentation/translations/it_IT/kernel-hacking/hacking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/hacking.rst
@@ -90,7 +90,7 @@ i gestori d'interruzioni devono essere veloci: spesso si limitano
 esclusivamente a notificare la presa in carico dell'interruzione,
 programmare una 'interruzione software' per l'esecuzione e quindi terminare.
 
-Potete dire d'essere in una interruzione hardware perché :c:func:`in_irq()`
+Potete dire d'essere in una interruzione hardware perché in_hardirq()
 ritorna vero.
 
 .. warning::
diff --git a/Documentation/translations/it_IT/kernel-hacking/locking.rst b/Documentation/translations/it_IT/kernel-hacking/locking.rst
index 1e7c84def369..1efb8293bf1f 100644
--- a/Documentation/translations/it_IT/kernel-hacking/locking.rst
+++ b/Documentation/translations/it_IT/kernel-hacking/locking.rst
@@ -1459,11 +1459,11 @@ contesto utente
   che hardware.
 
 interruzione hardware
-  Richiesta di interruzione hardware. in_irq() ritorna vero in un
+  Richiesta di interruzione hardware. in_hardirq() ritorna vero in un
   gestore d'interruzioni hardware.
 
 interruzione software / softirq
-  Gestore di interruzioni software: in_irq() ritorna falso;
+  Gestore di interruzioni software: in_hardirq() ritorna falso;
   in_softirq() ritorna vero. I tasklet e le softirq sono entrambi
   considerati 'interruzioni software'.
 
diff --git a/Documentation/translations/zh_CN/core-api/cachetlb.rst b/Documentation/translations/zh_CN/core-api/cachetlb.rst
index 55827b8a7c53..6fee45fe5e80 100644
--- a/Documentation/translations/zh_CN/core-api/cachetlb.rst
+++ b/Documentation/translations/zh_CN/core-api/cachetlb.rst
@@ -80,7 +80,7 @@ cpu上对这个地址空间进行刷新。
 5) ``void update_mmu_cache(struct vm_area_struct *vma,
    unsigned long address, pte_t *ptep)``
 
-	在每个页面故障结束时，这个程序被调用，以告诉体系结构特定的代码，在
+	在每个缺页异常结束时，这个程序被调用，以告诉体系结构特定的代码，在
 	软件页表中，在地址空间“vma->vm_mm”的虚拟地址“地址”处，现在存在
 	一个翻译。
 
diff --git a/Documentation/translations/zh_CN/core-api/index.rst b/Documentation/translations/zh_CN/core-api/index.rst
index d5e947d8b6f1..72f0a36daa1c 100644
--- a/Documentation/translations/zh_CN/core-api/index.rst
+++ b/Documentation/translations/zh_CN/core-api/index.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../core-api/irq/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/index.rst
 
-.. _cn_core-api_index.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_core-api_index.rst:
 
 ===========
 核心API文档
diff --git a/Documentation/translations/zh_CN/core-api/irq/concepts.rst b/Documentation/translations/zh_CN/core-api/irq/concepts.rst
index 41455bf0f783..9957f0453353 100644
--- a/Documentation/translations/zh_CN/core-api/irq/concepts.rst
+++ b/Documentation/translations/zh_CN/core-api/irq/concepts.rst
@@ -1,10 +1,12 @@
 .. include:: ../../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../../core-api/irq/concepts`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/irq/concepts.rst
 
-.. _cn_concepts.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_concepts.rst:
 
 ===========
 什么是IRQ？
diff --git a/Documentation/translations/zh_CN/core-api/irq/index.rst b/Documentation/translations/zh_CN/core-api/irq/index.rst
index 910ccabf041f..ba6acc4b48e5 100644
--- a/Documentation/translations/zh_CN/core-api/irq/index.rst
+++ b/Documentation/translations/zh_CN/core-api/irq/index.rst
@@ -1,7 +1,10 @@
 .. include:: ../../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../../core-api/irq/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/irq/index.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_irq_index.rst:
 
diff --git a/Documentation/translations/zh_CN/core-api/irq/irq-affinity.rst b/Documentation/translations/zh_CN/core-api/irq/irq-affinity.rst
index 82a4428f22fd..7addd5f27a88 100644
--- a/Documentation/translations/zh_CN/core-api/irq/irq-affinity.rst
+++ b/Documentation/translations/zh_CN/core-api/irq/irq-affinity.rst
@@ -1,10 +1,12 @@
 .. include:: ../../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../../core-api/irq/irq-affinity`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/irq/irq-affinity
 
-.. _cn_irq-affinity.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_irq-affinity.rst:
 
 ==============
 SMP IRQ 亲和性
diff --git a/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst b/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
index 3c82dd307a46..7d077742f758 100644
--- a/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
+++ b/Documentation/translations/zh_CN/core-api/irq/irq-domain.rst
@@ -1,10 +1,12 @@
 .. include:: ../../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../../core-api/irq/irq-domain`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/irq/irq-domain.rst
 
-.. _cn_irq-domain.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_irq-domain.rst:
 
 =======================
 irq_domain 中断号映射库
diff --git a/Documentation/translations/zh_CN/core-api/irq/irqflags-tracing.rst b/Documentation/translations/zh_CN/core-api/irq/irqflags-tracing.rst
index c889bd0f65d9..9af50b4b8c2d 100644
--- a/Documentation/translations/zh_CN/core-api/irq/irqflags-tracing.rst
+++ b/Documentation/translations/zh_CN/core-api/irq/irqflags-tracing.rst
@@ -1,10 +1,12 @@
 .. include:: ../../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../../core-api/irq/irqflags-tracing`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/core-api/irq/irqflags-tracing.rst
 
-.. _cn_irqflags-tracing.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_irqflags-tracing.rst:
 
 =================
 IRQ-flags状态追踪
diff --git a/Documentation/translations/zh_CN/core-api/kernel-api.rst b/Documentation/translations/zh_CN/core-api/kernel-api.rst
index d6f815ec265b..ab7d81889340 100644
--- a/Documentation/translations/zh_CN/core-api/kernel-api.rst
+++ b/Documentation/translations/zh_CN/core-api/kernel-api.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/kernel-api.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_kernel-api.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_kernel-api.rst:
 
 ============
 Linux内核API
diff --git a/Documentation/translations/zh_CN/core-api/kobject.rst b/Documentation/translations/zh_CN/core-api/kobject.rst
index f0e6a4aeb372..b7c37794cc7f 100644
--- a/Documentation/translations/zh_CN/core-api/kobject.rst
+++ b/Documentation/translations/zh_CN/core-api/kobject.rst
@@ -1,7 +1,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/kobject.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_core_api_kobject.rst:
 
diff --git a/Documentation/translations/zh_CN/core-api/local_ops.rst b/Documentation/translations/zh_CN/core-api/local_ops.rst
index ee67379b6869..41e4525038e8 100644
--- a/Documentation/translations/zh_CN/core-api/local_ops.rst
+++ b/Documentation/translations/zh_CN/core-api/local_ops.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/local_ops.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_local_ops:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_local_ops:
 
 ========================
 本地原子操作的语义和行为
diff --git a/Documentation/translations/zh_CN/core-api/padata.rst b/Documentation/translations/zh_CN/core-api/padata.rst
index c627f8f131f9..781d30675afd 100644
--- a/Documentation/translations/zh_CN/core-api/padata.rst
+++ b/Documentation/translations/zh_CN/core-api/padata.rst
@@ -3,7 +3,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/padata.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_core_api_padata.rst:
 
diff --git a/Documentation/translations/zh_CN/core-api/printk-basics.rst b/Documentation/translations/zh_CN/core-api/printk-basics.rst
index 2b20f6303a82..d574de3167c8 100644
--- a/Documentation/translations/zh_CN/core-api/printk-basics.rst
+++ b/Documentation/translations/zh_CN/core-api/printk-basics.rst
@@ -2,10 +2,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/printk-basics.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_printk-basics.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_printk-basics.rst:
 
 ==================
 使用printk记录消息
diff --git a/Documentation/translations/zh_CN/core-api/printk-formats.rst b/Documentation/translations/zh_CN/core-api/printk-formats.rst
index a680c8f164c3..ce39c788cf5a 100644
--- a/Documentation/translations/zh_CN/core-api/printk-formats.rst
+++ b/Documentation/translations/zh_CN/core-api/printk-formats.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/printk-formats.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_printk-formats.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_printk-formats.rst:
 
 ==============================
 如何获得正确的printk格式占位符
diff --git a/Documentation/translations/zh_CN/core-api/refcount-vs-atomic.rst b/Documentation/translations/zh_CN/core-api/refcount-vs-atomic.rst
index ea834e38d2f6..e2467fd26fc0 100644
--- a/Documentation/translations/zh_CN/core-api/refcount-vs-atomic.rst
+++ b/Documentation/translations/zh_CN/core-api/refcount-vs-atomic.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/refcount-vs-atomic.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_refcount-vs-atomic:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_refcount-vs-atomic:
 
 =======================================
 与atomic_t相比，refcount_t的API是这样的
diff --git a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
index ce05c29c7697..6abf7ed534ca 100644
--- a/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
+++ b/Documentation/translations/zh_CN/core-api/symbol-namespaces.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/symbol-namespaces.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_symbol-namespaces.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_symbol-namespaces.rst:
 
 =================================
 符号命名空间（Symbol Namespaces）
diff --git a/Documentation/translations/zh_CN/core-api/workqueue.rst b/Documentation/translations/zh_CN/core-api/workqueue.rst
index 0b8f730db6c0..e372fa5cf101 100644
--- a/Documentation/translations/zh_CN/core-api/workqueue.rst
+++ b/Documentation/translations/zh_CN/core-api/workqueue.rst
@@ -2,10 +2,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/core-api/workqueue.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
 
-.. _cn_workqueue.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_workqueue.rst:
 
 =========================
 并发管理的工作队列 (cmwq)
diff --git a/Documentation/translations/zh_CN/cpu-freq/core.rst b/Documentation/translations/zh_CN/cpu-freq/core.rst
index 19fb9c029cfe..0c6fd447ced6 100644
--- a/Documentation/translations/zh_CN/cpu-freq/core.rst
+++ b/Documentation/translations/zh_CN/cpu-freq/core.rst
@@ -1,11 +1,13 @@
 .. SPDX-License-Identifier: GPL-2.0
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../cpu-freq/core`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/cpu-freq/core.rst
 
-.. _cn_core.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_core.rst:
 
 ====================================
 CPUFreq核心和CPUFreq通知器的通用说明
diff --git a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst
index 5ae9cfa2ec55..0fc5d1495789 100644
--- a/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst
+++ b/Documentation/translations/zh_CN/cpu-freq/cpu-drivers.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../cpu-freq/cpu-drivers`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/cpu-freq/cpu-drivers.rst
 
-.. _cn_cpu-drivers.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_cpu-drivers.rst:
 
 =======================================
 如何实现一个新的CPUFreq处理器驱动程序？
@@ -80,8 +82,6 @@ CPUfreq核心层注册一个cpufreq_driver结构体。
  .resume - 一个指向per-policy恢复函数的指针，该函数在关中断且在调节器再一次开始前被
  调用。
 
- .ready - 一个指向per-policy准备函数的指针，该函数在策略完全初始化之后被调用。
-
  .attr - 一个指向NULL结尾的"struct freq_attr"列表的指针，该函数允许导出值到
  sysfs。
 
diff --git a/Documentation/translations/zh_CN/cpu-freq/cpufreq-stats.rst b/Documentation/translations/zh_CN/cpu-freq/cpufreq-stats.rst
index c90d1d8353ed..f14423099d4b 100644
--- a/Documentation/translations/zh_CN/cpu-freq/cpufreq-stats.rst
+++ b/Documentation/translations/zh_CN/cpu-freq/cpufreq-stats.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../cpu-freq/cpufreq-stats`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/cpu-freq/cpufreq-stats.rst
 
-.. _cn_cpufreq-stats.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_cpufreq-stats.rst:
 
 ==========================================
 sysfs CPUFreq Stats的一般说明
diff --git a/Documentation/translations/zh_CN/cpu-freq/index.rst b/Documentation/translations/zh_CN/cpu-freq/index.rst
index 65074e211940..c6e50963cd33 100644
--- a/Documentation/translations/zh_CN/cpu-freq/index.rst
+++ b/Documentation/translations/zh_CN/cpu-freq/index.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../cpu-freq/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/cpu-freq/index.rst
 
-.. _cn_index.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_index.rst:
 
 =======================================================
 Linux CPUFreq - Linux(TM)内核中的CPU频率和电压升降代码
diff --git a/Documentation/translations/zh_CN/filesystems/debugfs.rst b/Documentation/translations/zh_CN/filesystems/debugfs.rst
index 822c4d42fdf9..4981a82dd651 100644
--- a/Documentation/translations/zh_CN/filesystems/debugfs.rst
+++ b/Documentation/translations/zh_CN/filesystems/debugfs.rst
@@ -2,7 +2,7 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../filesystems/debugfs`
+:Original: Documentation/filesystems/debugfs.rst
 
 =======
 Debugfs
diff --git a/Documentation/translations/zh_CN/iio/ep93xx_adc.rst b/Documentation/translations/zh_CN/iio/ep93xx_adc.rst
index 7e91d2197867..64f3f3508353 100644
--- a/Documentation/translations/zh_CN/iio/ep93xx_adc.rst
+++ b/Documentation/translations/zh_CN/iio/ep93xx_adc.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../iio/ep93xx_adc`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/iio/ep93xx_adc.rst
 
-.. _cn_iio_ep93xx_adc:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_iio_ep93xx_adc:
 
 ==================================
 思睿逻辑 EP93xx 模拟数字转换器驱动
diff --git a/Documentation/translations/zh_CN/iio/iio_configfs.rst b/Documentation/translations/zh_CN/iio/iio_configfs.rst
index 274488e8dce4..d5460e951804 100644
--- a/Documentation/translations/zh_CN/iio/iio_configfs.rst
+++ b/Documentation/translations/zh_CN/iio/iio_configfs.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../iio/iio_configfs`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/iio/iio_configfs.rst
 
-.. _cn_iio_configfs:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_iio_configfs:
 
 =====================
 工业 IIO configfs支持
diff --git a/Documentation/translations/zh_CN/iio/index.rst b/Documentation/translations/zh_CN/iio/index.rst
index 7087076a10f6..32d69047b16a 100644
--- a/Documentation/translations/zh_CN/iio/index.rst
+++ b/Documentation/translations/zh_CN/iio/index.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../iio/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/iio/index.rst
 
-.. _cn_iio_index:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_iio_index:
 
 ========
 工业 I/O
diff --git a/Documentation/translations/zh_CN/kernel-hacking/hacking.rst b/Documentation/translations/zh_CN/kernel-hacking/hacking.rst
index ab974faddecf..f2bc154c5bcc 100644
--- a/Documentation/translations/zh_CN/kernel-hacking/hacking.rst
+++ b/Documentation/translations/zh_CN/kernel-hacking/hacking.rst
@@ -68,7 +68,7 @@
 它将被排队（或丢弃）。因为它会关闭中断，所以处理程序必须很快：通常它只是
 确认中断，标记一个“软件中断”以执行并退出。
 
-您可以通过 :c:func:`in_irq()` 返回真来判断您处于硬件中断状态。
+您可以通过 in_hardirq() 返回真来判断您处于硬件中断状态。
 
 .. warning::
 
diff --git a/Documentation/translations/zh_CN/mips/booting.rst b/Documentation/translations/zh_CN/mips/booting.rst
index 96453e1b962e..e0bbd3f20862 100644
--- a/Documentation/translations/zh_CN/mips/booting.rst
+++ b/Documentation/translations/zh_CN/mips/booting.rst
@@ -2,8 +2,11 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../mips/booting`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/mips/booting.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_booting:
 
diff --git a/Documentation/translations/zh_CN/mips/features.rst b/Documentation/translations/zh_CN/mips/features.rst
index 93d93d06b1b3..b61dab06ceaf 100644
--- a/Documentation/translations/zh_CN/mips/features.rst
+++ b/Documentation/translations/zh_CN/mips/features.rst
@@ -2,8 +2,11 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../mips/features`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/mips/features.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_features:
 
diff --git a/Documentation/translations/zh_CN/mips/index.rst b/Documentation/translations/zh_CN/mips/index.rst
index b85033f9d67c..192c6adbb72e 100644
--- a/Documentation/translations/zh_CN/mips/index.rst
+++ b/Documentation/translations/zh_CN/mips/index.rst
@@ -2,8 +2,11 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../mips/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/mips/index.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 ===========================
 MIPS特性文档
diff --git a/Documentation/translations/zh_CN/mips/ingenic-tcu.rst b/Documentation/translations/zh_CN/mips/ingenic-tcu.rst
index f04ba407384a..ddbe149c517b 100644
--- a/Documentation/translations/zh_CN/mips/ingenic-tcu.rst
+++ b/Documentation/translations/zh_CN/mips/ingenic-tcu.rst
@@ -2,8 +2,11 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../mips/ingenic-tcu`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/mips/ingenic-tcu.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_ingenic-tcu:
 
diff --git a/Documentation/translations/zh_CN/openrisc/index.rst b/Documentation/translations/zh_CN/openrisc/index.rst
index d722642796c8..9ad6cc600884 100644
--- a/Documentation/translations/zh_CN/openrisc/index.rst
+++ b/Documentation/translations/zh_CN/openrisc/index.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../openrisc/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/openrisc/index.rst
 
-.. _cn_openrisc_index:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_openrisc_index:
 
 =================
 OpenRISC 体系架构
diff --git a/Documentation/translations/zh_CN/openrisc/openrisc_port.rst b/Documentation/translations/zh_CN/openrisc/openrisc_port.rst
index e87d0eec281d..b8a67670492d 100644
--- a/Documentation/translations/zh_CN/openrisc/openrisc_port.rst
+++ b/Documentation/translations/zh_CN/openrisc/openrisc_port.rst
@@ -1,7 +1,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../openrisc/openrisc_port`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/openrisc/openrisc_port.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_openrisc_port:
 
diff --git a/Documentation/translations/zh_CN/openrisc/todo.rst b/Documentation/translations/zh_CN/openrisc/todo.rst
index 9944ad05473b..63c38717edb1 100644
--- a/Documentation/translations/zh_CN/openrisc/todo.rst
+++ b/Documentation/translations/zh_CN/openrisc/todo.rst
@@ -1,7 +1,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../openrisc/todo`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/openrisc/todo.rst
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_openrisc_todo.rst:
 
diff --git a/Documentation/translations/zh_CN/parisc/debugging.rst b/Documentation/translations/zh_CN/parisc/debugging.rst
index c21beb986e15..68b73eb57105 100644
--- a/Documentation/translations/zh_CN/parisc/debugging.rst
+++ b/Documentation/translations/zh_CN/parisc/debugging.rst
@@ -1,7 +1,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/parisc/debugging.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_parisc_debugging:
 
diff --git a/Documentation/translations/zh_CN/parisc/index.rst b/Documentation/translations/zh_CN/parisc/index.rst
index a47454ebe32e..0cc553fc8272 100644
--- a/Documentation/translations/zh_CN/parisc/index.rst
+++ b/Documentation/translations/zh_CN/parisc/index.rst
@@ -2,7 +2,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/parisc/index.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_parisc_index:
 
diff --git a/Documentation/translations/zh_CN/parisc/registers.rst b/Documentation/translations/zh_CN/parisc/registers.rst
index 71e2404cd103..d2ab1874a602 100644
--- a/Documentation/translations/zh_CN/parisc/registers.rst
+++ b/Documentation/translations/zh_CN/parisc/registers.rst
@@ -1,7 +1,10 @@
 .. include:: ../disclaimer-zh_CN.rst
 
 :Original: Documentation/parisc/registers.rst
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
 .. _cn_parisc_registers:
 
diff --git a/Documentation/translations/zh_CN/riscv/boot-image-header.rst b/Documentation/translations/zh_CN/riscv/boot-image-header.rst
index 241bf9c1bcbe..0234c28a7114 100644
--- a/Documentation/translations/zh_CN/riscv/boot-image-header.rst
+++ b/Documentation/translations/zh_CN/riscv/boot-image-header.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../riscv/boot-image-header`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/riscv/boot-image-header.rst
 
-.. _cn_boot-image-header.rst:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_boot-image-header.rst:
 
 ==========================
 RISC-V Linux启动镜像文件头
diff --git a/Documentation/translations/zh_CN/riscv/index.rst b/Documentation/translations/zh_CN/riscv/index.rst
index db13b1101490..bbf5d7b3777a 100644
--- a/Documentation/translations/zh_CN/riscv/index.rst
+++ b/Documentation/translations/zh_CN/riscv/index.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../riscv/index`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/riscv/index.rst
 
-.. _cn_riscv_index:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_riscv_index:
 
 ===============
 RISC-V 体系结构
diff --git a/Documentation/translations/zh_CN/riscv/patch-acceptance.rst b/Documentation/translations/zh_CN/riscv/patch-acceptance.rst
index 9fd1c8216763..d180d24717bf 100644
--- a/Documentation/translations/zh_CN/riscv/patch-acceptance.rst
+++ b/Documentation/translations/zh_CN/riscv/patch-acceptance.rst
@@ -2,11 +2,13 @@
 
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../riscv/patch-acceptance`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/riscv/patch-acceptance.rst
 
-.. _cn_riscv_patch-acceptance:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_riscv_patch-acceptance:
 
 arch/riscv 开发者维护指南
 =========================
diff --git a/Documentation/translations/zh_CN/riscv/pmu.rst b/Documentation/translations/zh_CN/riscv/pmu.rst
index 22dcf3a9ca6e..7ec801026c4d 100644
--- a/Documentation/translations/zh_CN/riscv/pmu.rst
+++ b/Documentation/translations/zh_CN/riscv/pmu.rst
@@ -1,10 +1,12 @@
 .. include:: ../disclaimer-zh_CN.rst
 
-:Original: :doc:`../../../riscv/pmu`
-:Translator: Yanteng Si <siyanteng@loongson.cn>
+:Original: Documentation/riscv/pmu.rst
 
-.. _cn_riscv_pmu:
+:翻译:
+
+ 司延腾 Yanteng Si <siyanteng@loongson.cn>
 
+.. _cn_riscv_pmu:
 
 ========================
 RISC-V平台上对PMUs的支持
diff --git a/Documentation/translations/zh_TW/arm64/amu.rst b/Documentation/translations/zh_TW/arm64/amu.rst
new file mode 100644
index 000000000000..ffdc466e0f62
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/amu.rst
@@ -0,0 +1,104 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arm64/amu.rst <amu_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+==================================
+AArch64 Linux 中擴展的活動監控單元
+==================================
+
+作者: Ionela Voinescu <ionela.voinescu@arm.com>
+
+日期: 2019-09-10
+
+本文檔簡要描述了 AArch64 Linux 支持的活動監控單元的規範。
+
+
+架構總述
+--------
+
+活動監控是 ARMv8.4 CPU 架構引入的一個可選擴展特性。
+
+活動監控單元(在每個 CPU 中實現)爲系統管理提供了性能計數器。既可以通
+過系統寄存器的方式訪問計數器，同時也支持外部內存映射的方式訪問計數器。
+
+AMUv1 架構實現了一個由4個固定的64位事件計數器組成的計數器組。
+
+  - CPU 周期計數器：同 CPU 的頻率增長
+  - 常量計數器：同固定的系統時鐘頻率增長
+  - 淘汰指令計數器: 同每次架構指令執行增長
+  - 內存停頓周期計數器：計算由在時鐘域內的最後一級緩存中未命中而引起
+    的指令調度停頓周期數
+
+當處於 WFI 或者 WFE 狀態時，計數器不會增長。
+
+AMU 架構提供了一個高達16位的事件計數器空間，未來新的 AMU 版本中可能
+用它來實現新增的事件計數器。
+
+另外，AMUv1 實現了一個多達16個64位輔助事件計數器的計數器組。
+
+冷復位時所有的計數器會清零。
+
+
+基本支持
+--------
+
+內核可以安全地運行在支持 AMU 和不支持 AMU 的 CPU 組合中。
+因此，當配置 CONFIG_ARM64_AMU_EXTN 後我們無條件使能後續
+(secondary or hotplugged) CPU 檢測和使用這個特性。
+
+當在 CPU 上檢測到該特性時，我們會標記爲特性可用但是不能保證計數器的功能，
+僅表明有擴展屬性。
+
+固件(代碼運行在高異常級別，例如 arm-tf )需支持以下功能：
+
+ - 提供低異常級別(EL2 和 EL1)訪問 AMU 寄存器的能力。
+ - 使能計數器。如果未使能，它的值應爲 0。
+ - 在從電源關閉狀態啓動 CPU 前或後保存或者恢復計數器。
+
+當使用使能了該特性的內核啓動但固件損壞時，訪問計數器寄存器可能會遭遇
+panic 或者死鎖。即使未發現這些症狀，計數器寄存器返回的數據結果並不一
+定能反映真實情況。通常，計數器會返回 0，表明他們未被使能。
+
+如果固件沒有提供適當的支持最好關閉 CONFIG_ARM64_AMU_EXTN。
+值得注意的是，出於安全原因，不要繞過 AMUSERRENR_EL0 設置而捕獲從
+EL0(用戶空間) 訪問 EL1(內核空間)。 因此，固件應該確保訪問 AMU寄存器
+不會困在 EL2或EL3。
+
+AMUv1 的固定計數器可以通過如下系統寄存器訪問：
+
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+特定輔助計數器可以通過 SYS_AMEVCNTR1_EL0(n) 訪問，其中n介於0到15。
+
+詳細信息定義在目錄：arch/arm64/include/asm/sysreg.h。
+
+
+用戶空間訪問
+------------
+
+由於以下原因，當前禁止從用戶空間訪問 AMU 的寄存器：
+
+  - 安全因數：可能會暴露處於安全模式執行的代碼信息。
+  - 意願：AMU 是用於系統管理的。
+
+同樣，該功能對用戶空間不可見。
+
+
+虛擬化
+------
+
+由於以下原因，當前禁止從 KVM 客戶端的用戶空間(EL0)和內核空間(EL1)
+訪問 AMU 的寄存器：
+
+  - 安全因數：可能會暴露給其他客戶端或主機端執行的代碼信息。
+
+任何試圖訪問 AMU 寄存器的行爲都會觸發一個註冊在客戶端的未定義異常。
+
diff --git a/Documentation/translations/zh_TW/arm64/booting.txt b/Documentation/translations/zh_TW/arm64/booting.txt
new file mode 100644
index 000000000000..b9439dd54012
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/booting.txt
@@ -0,0 +1,251 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arm64/booting.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+zh_TW:	Hu Haowen <src.res@email.cn>
+C:	55f058e7574c3615dea4615573a19bdb258696c6
+---------------------------------------------------------------------
+Documentation/arm64/booting.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+本文翻譯提交時的 Git 檢出點爲： 55f058e7574c3615dea4615573a19bdb258696c6
+
+以下爲正文
+---------------------------------------------------------------------
+			啓動 AArch64 Linux
+			==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2012 年 09 月 07 日
+
+本文檔基於 Russell King 的 ARM 啓動文檔，且適用於所有公開發布的
+AArch64 Linux 內核代碼。
+
+AArch64 異常模型由多個異常級（EL0 - EL3）組成，對於 EL0 和 EL1 異常級
+有對應的安全和非安全模式。EL2 是系統管理級，且僅存在於非安全模式下。
+EL3 是最高特權級，且僅存在於安全模式下。
+
+基於本文檔的目的，我們將簡單地使用『引導裝載程序』（『boot loader』）
+這個術語來定義在將控制權交給 Linux 內核前 CPU 上執行的所有軟體。
+這可能包含安全監控和系統管理代碼，或者它可能只是一些用於準備最小啓動
+環境的指令。
+
+基本上，引導裝載程序（至少）應實現以下操作：
+
+1、設置和初始化 RAM
+2、設置設備樹數據
+3、解壓內核映像
+4、調用內核映像
+
+
+1、設置和初始化 RAM
+-----------------
+
+必要性: 強制
+
+引導裝載程序應該找到並初始化系統中所有內核用於保持系統變量數據的 RAM。
+這個操作的執行方式因設備而異。（它可能使用內部算法來自動定位和計算所有
+RAM，或可能使用對這個設備已知的 RAM 信息，還可能是引導裝載程序設計者
+想到的任何合適的方法。）
+
+
+2、設置設備樹數據
+---------------
+
+必要性: 強制
+
+設備樹數據塊（dtb）必須 8 字節對齊，且大小不能超過 2MB。由於設備樹
+數據塊將在使能緩存的情況下以 2MB 粒度被映射，故其不能被置於必須以特定
+屬性映射的2M區域內。
+
+註： v4.2 之前的版本同時要求設備樹數據塊被置於從內核映像以下
+text_offset 字節處算起第一個 512MB 內。
+
+3、解壓內核映像
+-------------
+
+必要性: 可選
+
+AArch64 內核當前沒有提供自解壓代碼，因此如果使用了壓縮內核映像文件
+（比如 Image.gz），則需要通過引導裝載程序（使用 gzip 等）來進行解壓。
+若引導裝載程序沒有實現這個功能，就要使用非壓縮內核映像文件。
+
+
+4、調用內核映像
+-------------
+
+必要性: 強制
+
+已解壓的內核映像包含一個 64 字節的頭，內容如下：
+
+  u32 code0;			/* 可執行代碼 */
+  u32 code1;			/* 可執行代碼 */
+  u64 text_offset;		/* 映像裝載偏移，小端模式 */
+  u64 image_size;		/* 映像實際大小, 小端模式 */
+  u64 flags;			/* 內核旗標, 小端模式 *
+  u64 res2	= 0;		/* 保留 */
+  u64 res3	= 0;		/* 保留 */
+  u64 res4	= 0;		/* 保留 */
+  u32 magic	= 0x644d5241;	/* 魔數, 小端, "ARM\x64" */
+  u32 res5;			/* 保留 （用於 PE COFF 偏移） */
+
+
+映像頭注釋：
+
+- 自 v3.17 起，除非另有說明，所有域都是小端模式。
+
+- code0/code1 負責跳轉到 stext.
+
+- 當通過 EFI 啓動時， 最初 code0/code1 被跳過。
+  res5 是到 PE 文件頭的偏移，而 PE 文件頭含有 EFI 的啓動入口點
+  （efi_stub_entry）。當 stub 代碼完成了它的使命，它會跳轉到 code0
+  繼續正常的啓動流程。
+
+- v3.17 之前，未明確指定 text_offset 的字節序。此時，image_size 爲零，
+  且 text_offset 依照內核字節序爲 0x80000。
+  當 image_size 非零，text_offset 爲小端模式且是有效值，應被引導加載
+  程序使用。當 image_size 爲零，text_offset 可假定爲 0x80000。
+
+- flags 域 (v3.17 引入) 爲 64 位小端模式，其編碼如下：
+  位 0: 	內核字節序。 1 表示大端模式，0 表示小端模式。
+  位 1-2:	內核頁大小。
+			0 - 未指定。
+			1 - 4K
+			2 - 16K
+			3 - 64K
+  位 3:		內核物理位置
+			0 - 2MB 對齊基址應儘量靠近內存起始處，因爲
+			    其基址以下的內存無法通過線性映射訪問
+			1 - 2MB 對齊基址可以在物理內存的任意位置
+  位 4-63:	保留。
+
+- 當 image_size 爲零時，引導裝載程序應試圖在內核映像末尾之後儘可能
+  多地保留空閒內存供內核直接使用。對內存空間的需求量因所選定的內核
+  特性而異, 並無實際限制。
+
+內核映像必須被放置在任意一個可用系統內存 2MB 對齊基址的 text_offset
+字節處，並從該處被調用。2MB 對齊基址和內核映像起始地址之間的區域對於
+內核來說沒有特殊意義，且可能被用於其他目的。
+從映像起始地址算起，最少必須準備 image_size 字節的空閒內存供內核使用。
+註： v4.6 之前的版本無法使用內核映像物理偏移以下的內存，所以當時建議
+將映像儘量放置在靠近系統內存起始的地方。
+
+任何提供給內核的內存（甚至在映像起始地址之前），若未從內核中標記爲保留
+(如在設備樹（dtb）的 memreserve 區域），都將被認爲對內核是可用。
+
+在跳轉入內核前，必須符合以下狀態：
+
+- 停止所有 DMA 設備，這樣內存數據就不會因爲虛假網絡包或磁碟數據而
+  被破壞。這可能可以節省你許多的調試時間。
+
+- 主 CPU 通用寄存器設置
+  x0 = 系統 RAM 中設備樹數據塊（dtb）的物理地址。
+  x1 = 0 (保留，將來可能使用)
+  x2 = 0 (保留，將來可能使用)
+  x3 = 0 (保留，將來可能使用)
+
+- CPU 模式
+  所有形式的中斷必須在 PSTATE.DAIF 中被屏蔽（Debug、SError、IRQ
+  和 FIQ）。
+  CPU 必須處於 EL2（推薦，可訪問虛擬化擴展）或非安全 EL1 模式下。
+
+- 高速緩存、MMU
+  MMU 必須關閉。
+  指令緩存開啓或關閉皆可。
+  已載入的內核映像的相應內存區必須被清理，以達到緩存一致性點（PoC）。
+  當存在系統緩存或其他使能緩存的一致性主控器時，通常需使用虛擬地址
+  維護其緩存，而非 set/way 操作。
+  遵從通過虛擬地址操作維護構架緩存的系統緩存必須被配置，並可以被使能。
+  而不通過虛擬地址操作維護構架緩存的系統緩存（不推薦），必須被配置且
+  禁用。
+
+  *譯者註：對於 PoC 以及緩存相關內容，請參考 ARMv8 構架參考手冊
+   ARM DDI 0487A
+
+- 架構計時器
+  CNTFRQ 必須設定爲計時器的頻率，且 CNTVOFF 必須設定爲對所有 CPU
+  都一致的值。如果在 EL1 模式下進入內核，則 CNTHCTL_EL2 中的
+  EL1PCTEN (bit 0) 必須置位。
+
+- 一致性
+  通過內核啓動的所有 CPU 在內核入口地址上必須處於相同的一致性域中。
+  這可能要根據具體實現來定義初始化過程，以使能每個CPU上對維護操作的
+  接收。
+
+- 系統寄存器
+  在進入內核映像的異常級中，所有構架中可寫的系統寄存器必須通過軟體
+  在一個更高的異常級別下初始化，以防止在 未知 狀態下運行。
+
+  對於擁有 GICv3 中斷控制器並以 v3 模式運行的系統：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.Enable (位 3) 必須初始化爲 0b1。
+    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b1。
+  - 若內核運行在 EL1：
+    ICC_SRE_EL2.Enable (位 3) 必須初始化爲 0b1。
+    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b1。
+  - 設備樹（DT）或 ACPI 表必須描述一個 GICv3 中斷控制器。
+
+  對於擁有 GICv3 中斷控制器並以兼容（v2）模式運行的系統：
+  - 如果 EL3 存在：
+    ICC_SRE_EL3.SRE (位 0) 必須初始化爲 0b0。
+  - 若內核運行在 EL1：
+    ICC_SRE_EL2.SRE (位 0) 必須初始化爲 0b0。
+  - 設備樹（DT）或 ACPI 表必須描述一個 GICv2 中斷控制器。
+
+以上對於 CPU 模式、高速緩存、MMU、架構計時器、一致性、系統寄存器的
+必要條件描述適用於所有 CPU。所有 CPU 必須在同一異常級別跳入內核。
+
+引導裝載程序必須在每個 CPU 處於以下狀態時跳入內核入口：
+
+- 主 CPU 必須直接跳入內核映像的第一條指令。通過此 CPU 傳遞的設備樹
+  數據塊必須在每個 CPU 節點中包含一個 『enable-method』 屬性，所
+  支持的 enable-method 請見下文。
+
+  引導裝載程序必須生成這些設備樹屬性，並在跳入內核入口之前將其插入
+  數據塊。
+
+- enable-method 爲 「spin-table」 的 CPU 必須在它們的 CPU
+  節點中包含一個 『cpu-release-addr』 屬性。這個屬性標識了一個
+  64 位自然對齊且初始化爲零的內存位置。
+
+  這些 CPU 必須在內存保留區（通過設備樹中的 /memreserve/ 域傳遞
+  給內核）中自旋於內核之外，輪詢它們的 cpu-release-addr 位置（必須
+  包含在保留區中）。可通過插入 wfe 指令來降低忙循環開銷，而主 CPU 將
+  發出 sev 指令。當對 cpu-release-addr 所指位置的讀取操作返回非零值
+  時，CPU 必須跳入此值所指向的地址。此值爲一個單獨的 64 位小端值，
+  因此 CPU 須在跳轉前將所讀取的值轉換爲其本身的端模式。
+
+- enable-method 爲 「psci」 的 CPU 保持在內核外（比如，在
+  memory 節點中描述爲內核空間的內存區外，或在通過設備樹 /memreserve/
+  域中描述爲內核保留區的空間中）。內核將會發起在 ARM 文檔（編號
+  ARM DEN 0022A：用於 ARM 上的電源狀態協調接口系統軟體）中描述的
+  CPU_ON 調用來將 CPU 帶入內核。
+
+  *譯者注: ARM DEN 0022A 已更新到 ARM DEN 0022C。
+
+  設備樹必須包含一個 『psci』 節點，請參考以下文檔：
+  Documentation/devicetree/bindings/arm/psci.yaml
+
+
+- 輔助 CPU 通用寄存器設置
+  x0 = 0 (保留，將來可能使用)
+  x1 = 0 (保留，將來可能使用)
+  x2 = 0 (保留，將來可能使用)
+  x3 = 0 (保留，將來可能使用)
+
diff --git a/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst b/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst
new file mode 100644
index 000000000000..3eb1c623ce31
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/elf_hwcaps.rst
@@ -0,0 +1,244 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arm64/elf_hwcaps.rst <elf_hwcaps_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+================
+ARM64 ELF hwcaps
+================
+
+這篇文檔描述了 arm64 ELF hwcaps 的用法和語義。
+
+
+1. 簡介
+-------
+
+有些硬體或軟體功能僅在某些 CPU 實現上和/或在具體某個內核配置上可用，但
+對於處於 EL0 的用戶空間代碼沒有可用的架構發現機制。內核通過在輔助向量表
+公開一組稱爲 hwcaps 的標誌而把這些功能暴露給用戶空間。
+
+用戶空間軟體可以通過獲取輔助向量的 AT_HWCAP 或 AT_HWCAP2 條目來測試功能，
+並測試是否設置了相關標誌，例如::
+
+	bool floating_point_is_present(void)
+	{
+		unsigned long hwcaps = getauxval(AT_HWCAP);
+		if (hwcaps & HWCAP_FP)
+			return true;
+
+		return false;
+	}
+
+如果軟體依賴於 hwcap 描述的功能，在嘗試使用該功能前則應檢查相關的 hwcap
+標誌以驗證該功能是否存在。
+
+不能通過其他方式探查這些功能。當一個功能不可用時，嘗試使用它可能導致不可
+預測的行爲，並且無法保證能確切的知道該功能不可用，例如 SIGILL。
+
+
+2. Hwcaps 的說明
+----------------
+
+大多數 hwcaps 旨在說明通過架構 ID 寄存器(處於 EL0 的用戶空間代碼無法訪問)
+描述的功能的存在。這些 hwcap 通過 ID 寄存器欄位定義，並且應根據 ARM 體系
+結構參考手冊（ARM ARM）中定義的欄位來解釋說明。
+
+這些 hwcaps 以下面的形式描述::
+
+    idreg.field == val 表示有某個功能。
+
+當 idreg.field 中有 val 時，hwcaps 表示 ARM ARM 定義的功能是有效的，但是
+並不是說要完全和 val 相等，也不是說 idreg.field 描述的其他功能就是缺失的。
+
+其他 hwcaps 可能表明無法僅由 ID 寄存器描述的功能的存在。這些 hwcaps 可能
+沒有被 ID 寄存器描述，需要參考其他文檔。
+
+
+3. AT_HWCAP 中揭示的 hwcaps
+---------------------------
+
+HWCAP_FP
+    ID_AA64PFR0_EL1.FP == 0b0000 表示有此功能。
+
+HWCAP_ASIMD
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0000 表示有此功能。
+
+HWCAP_EVTSTRM
+    通用計時器頻率配置爲大約100KHz以生成事件。
+
+HWCAP_AES
+    ID_AA64ISAR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP_PMULL
+    ID_AA64ISAR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP_SHA1
+    ID_AA64ISAR0_EL1.SHA1 == 0b0001 表示有此功能。
+
+HWCAP_SHA2
+    ID_AA64ISAR0_EL1.SHA2 == 0b0001 表示有此功能。
+
+HWCAP_CRC32
+    ID_AA64ISAR0_EL1.CRC32 == 0b0001 表示有此功能。
+
+HWCAP_ATOMICS
+    ID_AA64ISAR0_EL1.Atomic == 0b0010 表示有此功能。
+
+HWCAP_FPHP
+    ID_AA64PFR0_EL1.FP == 0b0001 表示有此功能。
+
+HWCAP_ASIMDHP
+    ID_AA64PFR0_EL1.AdvSIMD == 0b0001 表示有此功能。
+
+HWCAP_CPUID
+    根據 Documentation/arm64/cpu-feature-registers.rst 描述，EL0 可以訪問
+    某些 ID 寄存器。
+
+    這些 ID 寄存器可能表示功能的可用性。
+
+HWCAP_ASIMDRDM
+    ID_AA64ISAR0_EL1.RDM == 0b0001 表示有此功能。
+
+HWCAP_JSCVT
+    ID_AA64ISAR1_EL1.JSCVT == 0b0001 表示有此功能。
+
+HWCAP_FCMA
+    ID_AA64ISAR1_EL1.FCMA == 0b0001 表示有此功能。
+
+HWCAP_LRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0001 表示有此功能。
+
+HWCAP_DCPOP
+    ID_AA64ISAR1_EL1.DPB == 0b0001 表示有此功能。
+
+HWCAP_SHA3
+    ID_AA64ISAR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP_SM3
+    ID_AA64ISAR0_EL1.SM3 == 0b0001 表示有此功能。
+
+HWCAP_SM4
+    ID_AA64ISAR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP_ASIMDDP
+    ID_AA64ISAR0_EL1.DP == 0b0001 表示有此功能。
+
+HWCAP_SHA512
+    ID_AA64ISAR0_EL1.SHA2 == 0b0010 表示有此功能。
+
+HWCAP_SVE
+    ID_AA64PFR0_EL1.SVE == 0b0001 表示有此功能。
+
+HWCAP_ASIMDFHM
+    ID_AA64ISAR0_EL1.FHM == 0b0001 表示有此功能。
+
+HWCAP_DIT
+    ID_AA64PFR0_EL1.DIT == 0b0001 表示有此功能。
+
+HWCAP_USCAT
+    ID_AA64MMFR2_EL1.AT == 0b0001 表示有此功能。
+
+HWCAP_ILRCPC
+    ID_AA64ISAR1_EL1.LRCPC == 0b0010 表示有此功能。
+
+HWCAP_FLAGM
+    ID_AA64ISAR0_EL1.TS == 0b0001 表示有此功能。
+
+HWCAP_SSBS
+    ID_AA64PFR1_EL1.SSBS == 0b0010 表示有此功能。
+
+HWCAP_SB
+    ID_AA64ISAR1_EL1.SB == 0b0001 表示有此功能。
+
+HWCAP_PACA
+    如 Documentation/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.APA == 0b0001 或 ID_AA64ISAR1_EL1.API == 0b0001
+    表示有此功能。
+
+HWCAP_PACG
+    如 Documentation/arm64/pointer-authentication.rst 所描述，
+    ID_AA64ISAR1_EL1.GPA == 0b0001 或 ID_AA64ISAR1_EL1.GPI == 0b0001
+    表示有此功能。
+
+HWCAP2_DCPODP
+
+    ID_AA64ISAR1_EL1.DPB == 0b0010 表示有此功能。
+
+HWCAP2_SVE2
+
+    ID_AA64ZFR0_EL1.SVEVer == 0b0001 表示有此功能。
+
+HWCAP2_SVEAES
+
+    ID_AA64ZFR0_EL1.AES == 0b0001 表示有此功能。
+
+HWCAP2_SVEPMULL
+
+    ID_AA64ZFR0_EL1.AES == 0b0010 表示有此功能。
+
+HWCAP2_SVEBITPERM
+
+    ID_AA64ZFR0_EL1.BitPerm == 0b0001 表示有此功能。
+
+HWCAP2_SVESHA3
+
+    ID_AA64ZFR0_EL1.SHA3 == 0b0001 表示有此功能。
+
+HWCAP2_SVESM4
+
+    ID_AA64ZFR0_EL1.SM4 == 0b0001 表示有此功能。
+
+HWCAP2_FLAGM2
+
+    ID_AA64ISAR0_EL1.TS == 0b0010 表示有此功能。
+
+HWCAP2_FRINT
+
+    ID_AA64ISAR1_EL1.FRINTTS == 0b0001 表示有此功能。
+
+HWCAP2_SVEI8MM
+
+    ID_AA64ZFR0_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF32MM
+
+    ID_AA64ZFR0_EL1.F32MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEF64MM
+
+    ID_AA64ZFR0_EL1.F64MM == 0b0001 表示有此功能。
+
+HWCAP2_SVEBF16
+
+    ID_AA64ZFR0_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_I8MM
+
+    ID_AA64ISAR1_EL1.I8MM == 0b0001 表示有此功能。
+
+HWCAP2_BF16
+
+    ID_AA64ISAR1_EL1.BF16 == 0b0001 表示有此功能。
+
+HWCAP2_DGH
+
+    ID_AA64ISAR1_EL1.DGH == 0b0001 表示有此功能。
+
+HWCAP2_RNG
+
+    ID_AA64ISAR0_EL1.RNDR == 0b0001 表示有此功能。
+
+HWCAP2_BTI
+
+    ID_AA64PFR0_EL1.BT == 0b0001 表示有此功能。
+
+
+4. 未使用的 AT_HWCAP 位
+-----------------------
+
+爲了與用戶空間交互，內核保證 AT_HWCAP 的第62、63位將始終返回0。
+
diff --git a/Documentation/translations/zh_TW/arm64/hugetlbpage.rst b/Documentation/translations/zh_TW/arm64/hugetlbpage.rst
new file mode 100644
index 000000000000..846b500dae97
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/hugetlbpage.rst
@@ -0,0 +1,49 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arm64/hugetlbpage.rst <hugetlbpage_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+=====================
+ARM64中的 HugeTLBpage
+=====================
+
+大頁依靠有效利用 TLBs 來提高地址翻譯的性能。這取決於以下
+兩點 -
+
+  - 大頁的大小
+  - TLBs 支持的條目大小
+
+ARM64 接口支持2種大頁方式。
+
+1) pud/pmd 級別的塊映射
+-----------------------
+
+這是常規大頁，他們的 pmd 或 pud 頁面表條目指向一個內存塊。
+不管 TLB 中支持的條目大小如何，塊映射可以減少翻譯大頁地址
+所需遍歷的頁表深度。
+
+2) 使用連續位
+-------------
+
+架構中轉換頁表條目(D4.5.3, ARM DDI 0487C.a)中提供一個連續
+位告訴 MMU 這個條目是一個連續條目集的一員，它可以被緩存在單
+個 TLB 條目中。
+
+在 Linux 中連續位用來增加 pmd 和 pte(最後一級)級別映射的大
+小。受支持的連續頁表條目數量因頁面大小和頁表級別而異。
+
+
+支持以下大頁尺寸配置 -
+
+  ====== ========   ====    ========    ===
+  -      CONT PTE    PMD    CONT PMD    PUD
+  ====== ========   ====    ========    ===
+  4K:         64K     2M         32M     1G
+  16K:         2M    32M          1G
+  64K:         2M   512M         16G
+  ====== ========   ====    ========    ===
+
diff --git a/Documentation/translations/zh_TW/arm64/index.rst b/Documentation/translations/zh_TW/arm64/index.rst
new file mode 100644
index 000000000000..2322783f3881
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/index.rst
@@ -0,0 +1,23 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arm64/index.rst <arm64_index>`
+:Translator: Bailu Lin <bailu.lin@vivo.com>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_arm64_index:
+
+
+==========
+ARM64 架構
+==========
+
+.. toctree::
+    :maxdepth: 2
+
+    amu
+    hugetlbpage
+    perf
+    elf_hwcaps
+
diff --git a/Documentation/translations/zh_TW/arm64/legacy_instructions.txt b/Documentation/translations/zh_TW/arm64/legacy_instructions.txt
new file mode 100644
index 000000000000..6d4454f77b9e
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/legacy_instructions.txt
@@ -0,0 +1,77 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arm64/legacy_instructions.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arm64/legacy_instructions.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版維護者： Punit Agrawal <punit.agrawal@arm.com>
+            Suzuki K. Poulose <suzuki.poulose@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者：胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+Linux 內核在 arm64 上的移植提供了一個基礎框架，以支持構架中正在被淘汰或已廢棄指令的模擬執行。
+這個基礎框架的代碼使用未定義指令鉤子（hooks）來支持模擬。如果指令存在，它也允許在硬體中啓用該指令。
+
+模擬模式可通過寫 sysctl 節點（/proc/sys/abi）來控制。
+不同的執行方式及 sysctl 節點的相應值，解釋如下：
+
+* Undef（未定義）
+  值： 0
+  產生未定義指令終止異常。它是那些構架中已廢棄的指令，如 SWP，的默認處理方式。
+
+* Emulate（模擬）
+  值： 1
+  使用軟體模擬方式。爲解決軟體遷移問題，這種模擬指令模式的使用是被跟蹤的，並會發出速率限制警告。
+  它是那些構架中正在被淘汰的指令，如 CP15 barriers（隔離指令），的默認處理方式。
+
+* Hardware Execution（硬體執行）
+  值： 2
+  雖然標記爲正在被淘汰，但一些實現可能提供硬體執行這些指令的使能/禁用操作。
+  使用硬體執行一般會有更好的性能，但將無法收集運行時對正被淘汰指令的使用統計數據。
+
+默認執行模式依賴於指令在構架中狀態。正在被淘汰的指令應該以模擬（Emulate）作爲默認模式，
+而已廢棄的指令必須默認使用未定義（Undef）模式
+
+注意：指令模擬可能無法應對所有情況。更多詳情請參考單獨的指令注釋。
+
+受支持的遺留指令
+-------------
+* SWP{B}
+節點: /proc/sys/abi/swp
+狀態: 已廢棄
+默認執行方式: Undef (0)
+
+* CP15 Barriers
+節點: /proc/sys/abi/cp15_barrier
+狀態: 正被淘汰，不推薦使用
+默認執行方式: Emulate (1)
+
+* SETEND
+節點: /proc/sys/abi/setend
+狀態: 正被淘汰，不推薦使用
+默認執行方式: Emulate (1)*
+註：爲了使能這個特性，系統中的所有 CPU 必須在 EL0 支持混合字節序。
+如果一個新的 CPU （不支持混合字節序） 在使能這個特性後被熱插入系統，
+在應用中可能會出現不可預期的結果。
+
diff --git a/Documentation/translations/zh_TW/arm64/memory.txt b/Documentation/translations/zh_TW/arm64/memory.txt
new file mode 100644
index 000000000000..99c2b78b5674
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/memory.txt
@@ -0,0 +1,119 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arm64/memory.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Catalin Marinas <catalin.marinas@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arm64/memory.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+本文翻譯提交時的 Git 檢出點爲： bc465aa9d045feb0e13b4a8f32cc33c1943f62d6
+
+英文版維護者： Catalin Marinas <catalin.marinas@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+		     Linux 在 AArch64 中的內存布局
+		     ===========================
+
+作者: Catalin Marinas <catalin.marinas@arm.com>
+
+本文檔描述 AArch64 Linux 內核所使用的虛擬內存布局。此構架可以實現
+頁大小爲 4KB 的 4 級轉換表和頁大小爲 64KB 的 3 級轉換表。
+
+AArch64 Linux 使用 3 級或 4 級轉換表，其頁大小配置爲 4KB，對於用戶和內核
+分別都有 39-bit (512GB) 或 48-bit (256TB) 的虛擬地址空間。
+對於頁大小爲 64KB的配置，僅使用 2 級轉換表，有 42-bit (4TB) 的虛擬地址空間，但內存布局相同。
+
+用戶地址空間的 63:48 位爲 0，而內核地址空間的相應位爲 1。TTBRx 的
+選擇由虛擬地址的 63 位給出。swapper_pg_dir 僅包含內核（全局）映射，
+而用戶 pgd 僅包含用戶（非全局）映射。swapper_pg_dir 地址被寫入
+TTBR1 中，且從不寫入 TTBR0。
+
+
+AArch64 Linux 在頁大小爲 4KB，並使用 3 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000007fffffffff	 512GB		用戶空間
+ffffff8000000000	ffffffffffffffff	 512GB		內核空間
+
+
+AArch64 Linux 在頁大小爲 4KB，並使用 4 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用戶空間
+ffff000000000000	ffffffffffffffff	 256TB		內核空間
+
+
+AArch64 Linux 在頁大小爲 64KB，並使用 2 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	000003ffffffffff	   4TB		用戶空間
+fffffc0000000000	ffffffffffffffff	   4TB		內核空間
+
+
+AArch64 Linux 在頁大小爲 64KB，並使用 3 級轉換表時的內存布局：
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000000000000000	0000ffffffffffff	 256TB		用戶空間
+ffff000000000000	ffffffffffffffff	 256TB		內核空間
+
+
+更詳細的內核虛擬內存布局，請參閱內核啓動信息。
+
+
+4KB 頁大小的轉換表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |         |         |         |         |
+ |                 |         |         |         |         v
+ |                 |         |         |         |   [11:0]  頁內偏移
+ |                 |         |         |         +-> [20:12] L3 索引
+ |                 |         |         +-----------> [29:21] L2 索引
+ |                 |         +---------------------> [38:30] L1 索引
+ |                 +-------------------------------> [47:39] L0 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+64KB 頁大小的轉換表查找：
+
++--------+--------+--------+--------+--------+--------+--------+--------+
+|63    56|55    48|47    40|39    32|31    24|23    16|15     8|7      0|
++--------+--------+--------+--------+--------+--------+--------+--------+
+ |                 |    |               |              |
+ |                 |    |               |              v
+ |                 |    |               |            [15:0]  頁內偏移
+ |                 |    |               +----------> [28:16] L3 索引
+ |                 |    +--------------------------> [41:29] L2 索引
+ |                 +-------------------------------> [47:42] L1 索引
+ +-------------------------------------------------> [63] TTBR0/1
+
+
+當使用 KVM 時, 管理程序（hypervisor）在 EL2 中通過相對內核虛擬地址的
+一個固定偏移來映射內核頁（內核虛擬地址的高 24 位設爲零）:
+
+起始地址			結束地址			大小		用途
+-----------------------------------------------------------------------
+0000004000000000	0000007fffffffff	 256GB		在 HYP 中映射的內核對象
+
diff --git a/Documentation/translations/zh_TW/arm64/perf.rst b/Documentation/translations/zh_TW/arm64/perf.rst
new file mode 100644
index 000000000000..f1ffd55dfe50
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/perf.rst
@@ -0,0 +1,88 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/arm64/perf.rst <perf_index>`
+
+Translator: Bailu Lin <bailu.lin@vivo.com>
+            Hu Haowen <src.res@email.cn>
+
+=============
+Perf 事件屬性
+=============
+
+:作者: Andrew Murray <andrew.murray@arm.com>
+:日期: 2019-03-06
+
+exclude_user
+------------
+
+該屬性排除用戶空間。
+
+用戶空間始終運行在 EL0，因此該屬性將排除 EL0。
+
+
+exclude_kernel
+--------------
+
+該屬性排除內核空間。
+
+打開 VHE 時內核運行在 EL2，不打開 VHE 時內核運行在 EL1。客戶機
+內核總是運行在 EL1。
+
+對於宿主機，該屬性排除 EL1 和 VHE 上的 EL2。
+
+對於客戶機，該屬性排除 EL1。請注意客戶機從來不會運行在 EL2。
+
+
+exclude_hv
+----------
+
+該屬性排除虛擬機監控器。
+
+對於 VHE 宿主機該屬性將被忽略，此時我們認爲宿主機內核是虛擬機監
+控器。
+
+對於 non-VHE 宿主機該屬性將排除 EL2，因爲虛擬機監控器運行在 EL2
+的任何代碼主要用於客戶機和宿主機的切換。
+
+對於客戶機該屬性無效。請注意客戶機從來不會運行在 EL2。
+
+
+exclude_host / exclude_guest
+----------------------------
+
+這些屬性分別排除了 KVM 宿主機和客戶機。
+
+KVM 宿主機可能運行在 EL0（用戶空間），EL1（non-VHE 內核）和
+EL2（VHE 內核 或 non-VHE 虛擬機監控器）。
+
+KVM 客戶機可能運行在 EL0（用戶空間）和 EL1（內核）。
+
+由於宿主機和客戶機之間重疊的異常級別，我們不能僅僅依靠 PMU 的硬體異
+常過濾機制-因此我們必須啓用/禁用對於客戶機進入和退出的計數。而這在
+VHE 和 non-VHE 系統上表現不同。
+
+對於 non-VHE 系統的 exclude_host 屬性排除 EL2 - 在進入和退出客戶
+機時，我們會根據 exclude_host 和 exclude_guest 屬性在適當的情況下
+禁用/啓用該事件。
+
+對於 VHE 系統的 exclude_guest 屬性排除 EL1，而對其中的 exclude_host
+屬性同時排除 EL0，EL2。在進入和退出客戶機時，我們會適當地根據
+exclude_host 和 exclude_guest 屬性包括/排除 EL0。
+
+以上聲明也適用於在 not-VHE 客戶機使用這些屬性時，但是請注意客戶機從
+來不會運行在 EL2。
+
+
+準確性
+------
+
+在 non-VHE 宿主機上，我們在 EL2 進入/退出宿主機/客戶機的切換時啓用/
+關閉計數器 -但是在啓用/禁用計數器和進入/退出客戶機之間存在一段延時。
+對於 exclude_host， 我們可以通過過濾 EL2 消除在客戶機進入/退出邊界
+上用於計數客戶機事件的宿主機事件計數器。但是當使用 !exclude_hv 時，
+在客戶機進入/退出有一個小的停電窗口無法捕獲到宿主機的事件。
+
+在 VHE 系統沒有停電窗口。
+
diff --git a/Documentation/translations/zh_TW/arm64/silicon-errata.txt b/Documentation/translations/zh_TW/arm64/silicon-errata.txt
new file mode 100644
index 000000000000..bf2077197504
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/silicon-errata.txt
@@ -0,0 +1,79 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arm64/silicon-errata.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+M:	Will Deacon <will.deacon@arm.com>
+zh_CN:	Fu Wei <wefu@redhat.com>
+zh_TW:	Hu Haowen <src.res@email.cn>
+C:	1926e54f115725a9248d0c4c65c22acaf94de4c4
+---------------------------------------------------------------------
+Documentation/arm64/silicon-errata.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+本文翻譯提交時的 Git 檢出點爲： 1926e54f115725a9248d0c4c65c22acaf94de4c4
+
+以下爲正文
+---------------------------------------------------------------------
+                晶片勘誤和軟體補救措施
+                ==================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2015年11月27日
+
+一個不幸的現實：硬體經常帶有一些所謂的「瑕疵（errata）」，導致其在
+某些特定情況下會違背構架定義的行爲。就基於 ARM 的硬體而言，這些瑕疵
+大體可分爲以下幾類：
+
+  A 類：無可行補救措施的嚴重缺陷。
+  B 類：有可接受的補救措施的重大或嚴重缺陷。
+  C 類：在正常操作中不會顯現的小瑕疵。
+
+更多資訊，請在 infocenter.arm.com （需註冊）中查閱「軟體開發者勘誤
+筆記」（「Software Developers Errata Notice」）文檔。
+
+對於 Linux 而言，B 類缺陷可能需要作業系統的某些特別處理。例如，避免
+一個特殊的代碼序列，或是以一種特定的方式配置處理器。在某種不太常見的
+情況下，爲將 A 類缺陷當作 C 類處理，可能需要用類似的手段。這些手段被
+統稱爲「軟體補救措施」，且僅在少數情況需要（例如，那些需要一個運行在
+非安全異常級的補救措施 *並且* 能被 Linux 觸發的情況）。
+
+對於尚在討論中的可能對未受瑕疵影響的系統產生干擾的軟體補救措施，有一個
+相應的內核配置（Kconfig）選項被加在 「內核特性（Kernel Features）」->
+「基於可選方法框架的 ARM 瑕疵補救措施（ARM errata workarounds via
+the alternatives framework）"。這些選項被默認開啓，若探測到受影響的CPU，
+補丁將在運行時被使用。至於對系統運行影響較小的補救措施，內核配置選項
+並不存在，且代碼以某種規避瑕疵的方式被構造（帶注釋爲宜）。
+
+這種做法對於在任意內核原始碼樹中準確地判斷出哪個瑕疵已被軟體方法所補救
+稍微有點麻煩，所以在 Linux 內核中此文件作爲軟體補救措施的註冊表，
+並將在新的軟體補救措施被提交和向後移植（backported）到穩定內核時被更新。
+
+| 實現者         | 受影響的組件    | 勘誤編號        | 內核配置                |
++----------------+-----------------+-----------------+-------------------------+
+| ARM            | Cortex-A53      | #826319         | ARM64_ERRATUM_826319    |
+| ARM            | Cortex-A53      | #827319         | ARM64_ERRATUM_827319    |
+| ARM            | Cortex-A53      | #824069         | ARM64_ERRATUM_824069    |
+| ARM            | Cortex-A53      | #819472         | ARM64_ERRATUM_819472    |
+| ARM            | Cortex-A53      | #845719         | ARM64_ERRATUM_845719    |
+| ARM            | Cortex-A53      | #843419         | ARM64_ERRATUM_843419    |
+| ARM            | Cortex-A57      | #832075         | ARM64_ERRATUM_832075    |
+| ARM            | Cortex-A57      | #852523         | N/A                     |
+| ARM            | Cortex-A57      | #834220         | ARM64_ERRATUM_834220    |
+|                |                 |                 |                         |
+| Cavium         | ThunderX ITS    | #22375, #24313  | CAVIUM_ERRATUM_22375    |
+| Cavium         | ThunderX GICv3  | #23154          | CAVIUM_ERRATUM_23154    |
+
diff --git a/Documentation/translations/zh_TW/arm64/tagged-pointers.txt b/Documentation/translations/zh_TW/arm64/tagged-pointers.txt
new file mode 100644
index 000000000000..87f88628401a
--- /dev/null
+++ b/Documentation/translations/zh_TW/arm64/tagged-pointers.txt
@@ -0,0 +1,57 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/arm64/tagged-pointers.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Will Deacon <will.deacon@arm.com>
+Chinese maintainer: Fu Wei <wefu@redhat.com>
+Traditional Chinese maintainer: Hu Haowen <src.res@email.cn>
+---------------------------------------------------------------------
+Documentation/arm64/tagged-pointers.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+
+英文版維護者： Will Deacon <will.deacon@arm.com>
+中文版維護者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版翻譯者： 傅煒  Fu Wei <wefu@redhat.com>
+中文版校譯者： 傅煒  Fu Wei <wefu@redhat.com>
+繁體中文版校譯者： 胡皓文  Hu Haowen <src.res@email.cn>
+
+以下爲正文
+---------------------------------------------------------------------
+		Linux 在 AArch64 中帶標記的虛擬地址
+		=================================
+
+作者: Will Deacon <will.deacon@arm.com>
+日期: 2013 年 06 月 12 日
+
+本文檔簡述了在 AArch64 地址轉換系統中提供的帶標記的虛擬地址及其在
+AArch64 Linux 中的潛在用途。
+
+內核提供的地址轉換表配置使通過 TTBR0 完成的虛擬地址轉換（即用戶空間
+映射），其虛擬地址的最高 8 位（63:56）會被轉換硬體所忽略。這種機制
+讓這些位可供應用程式自由使用，其注意事項如下：
+
+	(1) 內核要求所有傳遞到 EL1 的用戶空間地址帶有 0x00 標記。
+	    這意味著任何攜帶用戶空間虛擬地址的系統調用（syscall）
+	    參數 *必須* 在陷入內核前使它們的最高字節被清零。
+
+	(2) 非零標記在傳遞信號時不被保存。這意味著在應用程式中利用了
+	    標記的信號處理函數無法依賴 siginfo_t 的用戶空間虛擬
+	    地址所攜帶的包含其內部域信息的標記。此規則的一個例外是
+	    當信號是在調試觀察點的異常處理程序中產生的，此時標記的
+	    信息將被保存。
+
+	(3) 當使用帶標記的指針時需特別留心，因爲僅對兩個虛擬地址
+	    的高字節，C 編譯器很可能無法判斷它們是不同的。
+
+此構架會阻止對帶標記的 PC 指針的利用，因此在異常返回時，其高字節
+將被設置成一個爲 「55」 的擴展符。
+
diff --git a/Documentation/translations/zh_TW/cpu-freq/core.rst b/Documentation/translations/zh_TW/cpu-freq/core.rst
new file mode 100644
index 000000000000..3d890c2f2a61
--- /dev/null
+++ b/Documentation/translations/zh_TW/cpu-freq/core.rst
@@ -0,0 +1,108 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :doc:`../../../cpu-freq/core`
+:Translator: Yanteng Si <siyanteng@loongson.cn>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_core.rst:
+
+
+====================================
+CPUFreq核心和CPUFreq通知器的通用說明
+====================================
+
+作者:
+	- Dominik Brodowski  <linux@brodo.de>
+	- David Kimdon <dwhedon@debian.org>
+	- Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+	- Viresh Kumar <viresh.kumar@linaro.org>
+
+.. 目錄:
+
+   1.  CPUFreq核心和接口
+   2.  CPUFreq通知器
+   3.  含有Operating Performance Point (OPP)的CPUFreq表的生成
+
+1. CPUFreq核心和接口
+======================
+
+cpufreq核心代碼位於drivers/cpufreq/cpufreq.c中。這些cpufreq代碼爲CPUFreq架構的驅
+動程序（那些操作硬體切換頻率的代碼）以及 "通知器 "提供了一個標準化的接口。
+這些是設備驅動程序或需要了解策略變化的其它內核部分（如 ACPI 熱量管理）或所有頻率更改（除
+計時代碼外），甚至需要強制確定速度限制的通知器（如 ARM 架構上的 LCD 驅動程序）。
+此外， 內核 "常數" loops_per_jiffy會根據頻率變化而更新。
+
+cpufreq策略的引用計數由 cpufreq_cpu_get 和 cpufreq_cpu_put 來完成，以確保 cpufreq 驅
+動程序被正確地註冊到核心中，並且驅動程序在 cpufreq_put_cpu 被調用之前不會被卸載。這也保證
+了每個CPU核的cpufreq 策略在使用期間不會被釋放。
+
+2. CPUFreq 通知器
+====================
+
+CPUFreq通知器符合標準的內核通知器接口。
+關於通知器的細節請參閱 linux/include/linux/notifier.h。
+
+這裡有兩個不同的CPUfreq通知器 - 策略通知器和轉換通知器。
+
+
+2.1 CPUFreq策略通知器
+----------------------------
+
+當創建或移除策略時，這些都會被通知。
+
+階段是在通知器的第二個參數中指定的。當第一次創建策略時，階段是CPUFREQ_CREATE_POLICY，當
+策略被移除時，階段是CPUFREQ_REMOVE_POLICY。
+
+第三個參數 ``void *pointer`` 指向一個結構體cpufreq_policy，其包括min，max(新策略的下限和
+上限（單位爲kHz）)這幾個值。
+
+
+2.2 CPUFreq轉換通知器
+--------------------------------
+
+當CPUfreq驅動切換CPU核心頻率時，策略中的每個在線CPU都會收到兩次通知，這些變化沒有任何外部干
+預。
+
+第二個參數指定階段 - CPUFREQ_PRECHANGE or CPUFREQ_POSTCHANGE.
+
+第三個參數是一個包含如下值的結構體cpufreq_freqs：
+
+=====	====================
+cpu	受影響cpu的編號
+old	舊頻率
+new	新頻率
+flags	cpufreq驅動的標誌
+=====	====================
+
+3. 含有Operating Performance Point (OPP)的CPUFreq表的生成
+==================================================================
+關於OPP的細節請參閱 Documentation/power/opp.rst
+
+dev_pm_opp_init_cpufreq_table -
+	這個功能提供了一個隨時可用的轉換程序，用來將OPP層關於可用頻率的內部信息翻譯成一種容易提供給
+	cpufreq的格式。
+
+	.. Warning::
+
+		不要在中斷上下文中使用此函數。
+
+	例如::
+
+	 soc_pm_init()
+	 {
+		/* Do things */
+		r = dev_pm_opp_init_cpufreq_table(dev, &freq_table);
+		if (!r)
+			policy->freq_table = freq_table;
+		/* Do other things */
+	 }
+
+	.. note::
+
+		該函數只有在CONFIG_PM_OPP之外還啓用了CONFIG_CPU_FREQ時才可用。
+
+dev_pm_opp_free_cpufreq_table
+	釋放dev_pm_opp_init_cpufreq_table分配的表。
+
diff --git a/Documentation/translations/zh_TW/cpu-freq/cpu-drivers.rst b/Documentation/translations/zh_TW/cpu-freq/cpu-drivers.rst
new file mode 100644
index 000000000000..2bb8197cd320
--- /dev/null
+++ b/Documentation/translations/zh_TW/cpu-freq/cpu-drivers.rst
@@ -0,0 +1,256 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :doc:`../../../cpu-freq/cpu-drivers`
+:Translator: Yanteng Si <siyanteng@loongson.cn>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_cpu-drivers.rst:
+
+
+=======================================
+如何實現一個新的CPUFreq處理器驅動程序？
+=======================================
+
+作者:
+
+
+	- Dominik Brodowski  <linux@brodo.de>
+	- Rafael J. Wysocki <rafael.j.wysocki@intel.com>
+	- Viresh Kumar <viresh.kumar@linaro.org>
+
+.. Contents
+
+   1.   怎麼做？
+   1.1  初始化
+   1.2  Per-CPU 初始化
+   1.3  驗證
+   1.4  target/target_index 或 setpolicy?
+   1.5  target/target_index
+   1.6  setpolicy
+   1.7  get_intermediate 與 target_intermediate
+   2.   頻率表助手
+
+
+
+1. 怎麼做？
+===========
+
+如此，你剛剛得到了一個全新的CPU/晶片組及其數據手冊，並希望爲這個CPU/晶片組添加cpufreq
+支持？很好，這裡有一些至關重要的提示：
+
+
+1.1 初始化
+----------
+
+首先，在__initcall_level_7 (module_init())或更靠後的函數中檢查這個內核是否
+運行在正確的CPU和正確的晶片組上。如果是，則使用cpufreq_register_driver()向
+CPUfreq核心層註冊一個cpufreq_driver結構體。
+
+結構體cpufreq_driver應該包含什麼成員?
+
+ .name - 驅動的名字。
+
+ .init - 一個指向per-policy初始化函數的指針。
+
+ .verify - 一個指向"verification"函數的指針。
+
+ .setpolicy 或 .fast_switch 或 .target 或 .target_index - 差異見
+ 下文。
+
+並且可選擇
+
+ .flags - cpufreq核的提示。
+
+ .driver_data - cpufreq驅動程序的特定數據。
+
+ .get_intermediate 和 target_intermediate - 用於在改變CPU頻率時切換到穩定
+ 的頻率。
+
+ .get - 返回CPU的當前頻率。
+
+ .bios_limit - 返回HW/BIOS對CPU的最大頻率限制值。
+
+ .exit - 一個指向per-policy清理函數的指針，該函數在cpu熱插拔過程的CPU_POST_DEAD
+ 階段被調用。
+
+ .suspend - 一個指向per-policy暫停函數的指針，該函數在關中斷且在該策略的調節器停止
+ 後被調用。
+
+ .resume - 一個指向per-policy恢復函數的指針，該函數在關中斷且在調節器再一次開始前被
+ 調用。
+
+ .ready - 一個指向per-policy準備函數的指針，該函數在策略完全初始化之後被調用。
+
+ .attr - 一個指向NULL結尾的"struct freq_attr"列表的指針，該函數允許導出值到
+ sysfs。
+
+ .boost_enabled - 如果設置，則啓用提升(boost)頻率。
+
+ .set_boost - 一個指向per-policy函數的指針，該函數用來開啓/關閉提升(boost)頻率功能。
+
+
+1.2 Per-CPU 初始化
+------------------
+
+每當一個新的CPU被註冊到設備模型中，或者在cpufreq驅動註冊自己之後，如果此CPU的cpufreq策
+略不存在，則會調用per-policy的初始化函數cpufreq_driver.init。請注意，.init()和.exit()程序
+只對策略調用一次，而不是對策略管理的每個CPU調用一次。它需要一個 ``struct cpufreq_policy
+*policy`` 作爲參數。現在該怎麼做呢？
+
+如果有必要，請在你的CPU上激活CPUfreq功能支持。
+
+然後，驅動程序必須填寫以下數值:
+
++-----------------------------------+--------------------------------------+
+|policy->cpuinfo.min_freq 和	   |					  |
+|policy->cpuinfo.max_freq	    | 該CPU支持的最低和最高頻率（kHz）     |
+|				    |                                      |
+|				    | 				           |
++-----------------------------------+--------------------------------------+
+|policy->cpuinfo.transition_latency |                                      |
+|				    | CPU在兩個頻率之間切換所需的時間，以  |
+|				    | 納秒爲單位（如適用，否則指定         |
+|				    | CPUFREQ_ETERNAL）                    |
++-----------------------------------+--------------------------------------+
+|policy->cur			    | 該CPU當前的工作頻率(如適用)          |
+|				    |                                      |
++-----------------------------------+--------------------------------------+
+|policy->min,			    |					   |
+|policy->max,			    |					   |
+|policy->policy and, if necessary,  |					   |
+|policy->governor		    | 必須包含該cpu的 「默認策略」。稍後   |
+|				    | 會用這些值調用                       |
+|				    | cpufreq_driver.verify and either     |
+|				    | cpufreq_driver.setpolicy or          |
+|				    | cpufreq_driver.target/target_index   |
+|				    | 		                           |
++-----------------------------------+--------------------------------------+
+|policy->cpus			    | 用與這個CPU一起做DVFS的(在線+離線)   |
+|				    | CPU(即與它共享時鐘/電壓軌)的掩碼更新 |
+|				    | 這個                                 |
+|				    |                                      |
++-----------------------------------+--------------------------------------+
+
+對於設置其中的一些值(cpuinfo.min[max]_freq, policy->min[max])，頻率表助手可能會有幫
+助。關於它們的更多信息，請參見第2節。
+
+
+1.3 驗證
+--------
+
+當用戶決定設置一個新的策略(由 「policy,governor,min,max組成」)時，必須對這個策略進行驗證，
+以便糾正不兼容的值。爲了驗證這些值，cpufreq_verify_within_limits(``struct cpufreq_policy
+*policy``, ``unsigned int min_freq``, ``unsigned int max_freq``)函數可能會有幫助。
+關於頻率表助手的詳細內容請參見第2節。
+
+您需要確保至少有一個有效頻率（或工作範圍）在 policy->min 和 policy->max 範圍內。如果有必
+要，先增加policy->max，只有在沒有辦法的情況下，才減少policy->min。
+
+
+1.4 target 或 target_index 或 setpolicy 或 fast_switch?
+-------------------------------------------------------
+
+大多數cpufreq驅動甚至大多數cpu頻率升降算法只允許將CPU頻率設置爲預定義的固定值。對於這些，你
+可以使用->target()，->target_index()或->fast_switch()回調。
+
+有些cpufreq功能的處理器可以自己在某些限制之間切換頻率。這些應使用->setpolicy()回調。
+
+
+1.5. target/target_index
+------------------------
+
+target_index調用有兩個參數：``struct cpufreq_policy * policy``和``unsigned int``
+索引(於列出的頻率表)。
+
+當調用這裡時，CPUfreq驅動必須設置新的頻率。實際頻率必須由freq_table[index].frequency決定。
+
+它應該總是在錯誤的情況下恢復到之前的頻率(即policy->restore_freq)，即使我們之前切換到中間頻率。
+
+已棄用
+----------
+目標調用有三個參數。``struct cpufreq_policy * policy``, unsigned int target_frequency,
+unsigned int relation.
+
+CPUfreq驅動在調用這裡時必須設置新的頻率。實際的頻率必須使用以下規則來確定。
+
+- 緊跟 "目標頻率"。
+- policy->min <= new_freq <= policy->max (這必須是有效的!!!)
+- 如果 relation==CPUFREQ_REL_L，嘗試選擇一個高於或等於 target_freq 的 new_freq。("L代表
+  最低，但不能低於")
+- 如果 relation==CPUFREQ_REL_H，嘗試選擇一個低於或等於 target_freq 的 new_freq。("H代表
+  最高，但不能高於")
+
+這裡，頻率表助手可能會幫助你--詳見第2節。
+
+1.6. fast_switch
+----------------
+
+這個函數用於從調度器的上下文進行頻率切換。並非所有的驅動都要實現它，因爲不允許在這個回調中睡眠。這
+個回調必須經過高度優化，以儘可能快地進行切換。
+
+這個函數有兩個參數： ``struct cpufreq_policy *policy`` 和 ``unsigned int target_frequency``。
+
+
+1.7 setpolicy
+-------------
+
+setpolicy調用只需要一個``struct cpufreq_policy * policy``作爲參數。需要將處理器內或晶片組內動態頻
+率切換的下限設置爲policy->min，上限設置爲policy->max，如果支持的話，當policy->policy爲
+CPUFREQ_POLICY_PERFORMANCE時選擇面向性能的設置，當CPUFREQ_POLICY_POWERSAVE時選擇面向省電的設置。
+也可以查看drivers/cpufreq/longrun.c中的參考實現。
+
+1.8 get_intermediate 和 target_intermediate
+--------------------------------------------
+
+僅適用於 target_index() 和 CPUFREQ_ASYNC_NOTIFICATION 未設置的驅動。
+
+get_intermediate應該返回一個平台想要切換到的穩定的中間頻率，target_intermediate()應該將CPU設置爲
+該頻率，然後再跳轉到'index'對應的頻率。核心會負責發送通知，驅動不必在target_intermediate()或
+target_index()中處理。
+
+在驅動程序不想因爲某個目標頻率切換到中間頻率的情況下，它們可以從get_intermediate()中返回'0'。在這種情況
+下，核心將直接調用->target_index()。
+
+注意：->target_index()應該在失敗的情況下恢復到policy->restore_freq，因爲core會爲此發送通知。
+
+
+2. 頻率表助手
+=============
+
+由於大多數cpufreq處理器只允許被設置爲幾個特定的頻率，因此，一個帶有一些函數的 「頻率表」可能會輔助處理器驅動
+程序的一些工作。這樣的 "頻率表" 由一個cpufreq_frequency_table條目構成的數組組成，"driver_data" 中包
+含了驅動程序的具體數值，"frequency" 中包含了相應的頻率，並設置了標誌。在表的最後，需要添加一個
+cpufreq_frequency_table條目，頻率設置爲CPUFREQ_TABLE_END。而如果想跳過表中的一個條目，則將頻率設置爲
+CPUFREQ_ENTRY_INVALID。這些條目不需要按照任何特定的順序排序，但如果它們是cpufreq 核心會對它們進行快速的DVFS，
+因爲搜索最佳匹配會更快。
+
+如果策略在其policy->freq_table欄位中包含一個有效的指針，cpufreq表就會被核心自動驗證。
+
+cpufreq_frequency_table_verify()保證至少有一個有效的頻率在policy->min和policy->max範圍內，並且所有其他
+標準都被滿足。這對->verify調用很有幫助。
+
+cpufreq_frequency_table_target()是對應於->target階段的頻率表助手。只要把數值傳遞給這個函數，這個函數就會返
+回包含CPU要設置的頻率的頻率表條目。
+
+以下宏可以作爲cpufreq_frequency_table的疊代器。
+
+cpufreq_for_each_entry(pos, table) - 遍歷頻率表的所有條目。
+
+cpufreq_for_each_valid_entry(pos, table) - 該函數遍歷所有條目，不包括CPUFREQ_ENTRY_INVALID頻率。
+使用參數 "pos"-一個``cpufreq_frequency_table * `` 作爲循環變量，使用參數 "table"-作爲你想疊代
+的``cpufreq_frequency_table * `` 。
+
+例如::
+
+	struct cpufreq_frequency_table *pos, *driver_freq_table;
+
+	cpufreq_for_each_entry(pos, driver_freq_table) {
+		/* Do something with pos */
+		pos->frequency = ...
+	}
+
+如果你需要在driver_freq_table中處理pos的位置，不要減去指針，因爲它的代價相當高。相反，使用宏
+cpufreq_for_each_entry_idx() 和 cpufreq_for_each_valid_entry_idx() 。
+
diff --git a/Documentation/translations/zh_TW/cpu-freq/cpufreq-stats.rst b/Documentation/translations/zh_TW/cpu-freq/cpufreq-stats.rst
new file mode 100644
index 000000000000..d80bfed50e8c
--- /dev/null
+++ b/Documentation/translations/zh_TW/cpu-freq/cpufreq-stats.rst
@@ -0,0 +1,132 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :doc:`../../../cpu-freq/cpufreq-stats`
+:Translator: Yanteng Si <siyanteng@loongson.cn>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_cpufreq-stats.rst:
+
+
+==========================================
+sysfs CPUFreq Stats的一般說明
+==========================================
+
+用戶信息
+
+
+作者: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
+
+.. Contents
+
+   1. 簡介
+   2. 提供的統計數據(舉例說明)
+   3. 配置cpufreq-stats
+
+
+1. 簡介
+===============
+
+cpufreq-stats是一個爲每個CPU提供CPU頻率統計的驅動。
+這些統計數據在/sysfs中以一堆只讀接口的形式提供。這個接口（在配置好後）將出現在
+/sysfs（<sysfs root>/devices/system/cpu/cpuX/cpufreq/stats/）中cpufreq下的一個單
+獨的目錄中，提供給每個CPU。
+各種統計數據將在此目錄下形成只讀文件。
+
+此驅動是獨立於任何可能運行在你所用CPU上的特定cpufreq_driver而設計的。因此，它將與所有
+cpufreq_driver一起工作。
+
+
+2. 提供的統計數據(舉例說明)
+=====================================
+
+cpufreq stats提供了以下統計數據（在下面詳細解釋）。
+
+-  time_in_state
+-  total_trans
+-  trans_table
+
+所有的統計數據將從統計驅動被載入的時間（或統計被重置的時間）開始，到某一統計數據被讀取的時間爲止。
+顯然，統計驅動不會有任何關於統計驅動載入之前的頻率轉換信息。
+
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # ls -l
+    total 0
+    drwxr-xr-x  2 root root    0 May 14 16:06 .
+    drwxr-xr-x  3 root root    0 May 14 15:58 ..
+    --w-------  1 root root 4096 May 14 16:06 reset
+    -r--r--r--  1 root root 4096 May 14 16:06 time_in_state
+    -r--r--r--  1 root root 4096 May 14 16:06 total_trans
+    -r--r--r--  1 root root 4096 May 14 16:06 trans_table
+
+- **reset**
+
+只寫屬性，可用於重置統計計數器。這對於評估不同調節器下的系統行爲非常有用，且無需重啓。
+
+
+- **time_in_state**
+
+此項給出了這個CPU所支持的每個頻率所花費的時間。cat輸出的每一行都會有"<frequency>
+<time>"對，表示這個CPU在<frequency>上花費了<time>個usertime單位的時間。這裡的
+usertime單位是10mS（類似於/proc中輸出的其他時間）。
+
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat time_in_state
+    3600000 2089
+    3400000 136
+    3200000 34
+    3000000 67
+    2800000 172488
+
+
+- **total_trans**
+
+給出了這個CPU上頻率轉換的總次數。cat的輸出將有一個單一的計數，這就是頻率轉換的總數。
+
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat total_trans
+    20
+
+- **trans_table**
+
+這將提供所有CPU頻率轉換的細粒度信息。這裡的cat輸出是一個二維矩陣，其中一個條目<i, j>（第
+i行，第j列）代表從Freq_i到Freq_j的轉換次數。Freq_i行和Freq_j列遵循驅動最初提供給cpufreq
+核的頻率表的排序順序，因此可以排序（升序或降序）或不排序。 這裡的輸出也包含了每行每列的實際
+頻率值，以便更好地閱讀。
+
+如果轉換表大於PAGE_SIZE，讀取時將返回一個-EFBIG錯誤。
+
+::
+
+    <mysystem>:/sys/devices/system/cpu/cpu0/cpufreq/stats # cat trans_table
+    From  :    To
+	    :   3600000   3400000   3200000   3000000   2800000
+    3600000:         0         5         0         0         0
+    3400000:         4         0         2         0         0
+    3200000:         0         1         0         2         0
+    3000000:         0         0         1         0         3
+    2800000:         0         0         0         2         0
+
+3. 配置cpufreq-stats
+============================
+
+要在你的內核中配置cpufreq-stats::
+
+	Config Main Menu
+		Power management options (ACPI, APM)  --->
+			CPU Frequency scaling  --->
+				[*] CPU Frequency scaling
+				[*]   CPU frequency translation statistics
+
+
+"CPU Frequency scaling" (CONFIG_CPU_FREQ) 應該被啓用以配置cpufreq-stats。
+
+"CPU frequency translation statistics" (CONFIG_CPU_FREQ_STAT)提供了包括
+time_in_state、total_trans和trans_table的統計數據。
+
+一旦啓用了這個選項，並且你的CPU支持cpufrequency，你就可以在/sysfs中看到CPU頻率統計。
+
diff --git a/Documentation/translations/zh_TW/cpu-freq/index.rst b/Documentation/translations/zh_TW/cpu-freq/index.rst
new file mode 100644
index 000000000000..1a8e680f95ed
--- /dev/null
+++ b/Documentation/translations/zh_TW/cpu-freq/index.rst
@@ -0,0 +1,47 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :doc:`../../../cpu-freq/index`
+:Translator: Yanteng Si <siyanteng@loongson.cn>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_index.rst:
+
+
+=======================================================
+Linux CPUFreq - Linux(TM)內核中的CPU頻率和電壓升降代碼
+=======================================================
+
+Author: Dominik Brodowski  <linux@brodo.de>
+
+      時鐘升降允許你在運行中改變CPU的時鐘速度。這是一個很好的節省電池電量的方法，因爲時
+      鐘速度越低，CPU消耗的電量越少。
+
+
+.. toctree::
+   :maxdepth: 1
+
+   core
+   cpu-drivers
+   cpufreq-stats
+
+郵件列表
+------------
+這裡有一個 CPU 頻率變化的 CVS 提交和通用列表，您可以在這裡報告bug、問題或提交補丁。要發
+布消息，請發送電子郵件到 linux-pm@vger.kernel.org。
+
+連結
+-----
+FTP檔案:
+* ftp://ftp.linux.org.uk/pub/linux/cpufreq/
+
+如何訪問CVS倉庫:
+* http://cvs.arm.linux.org.uk/
+
+CPUFreq郵件列表:
+* http://vger.kernel.org/vger-lists.html#linux-pm
+
+SA-1100的時鐘和電壓標度:
+* http://www.lartmaker.nl/projects/scaling
+
diff --git a/Documentation/translations/zh_TW/filesystems/debugfs.rst b/Documentation/translations/zh_TW/filesystems/debugfs.rst
new file mode 100644
index 000000000000..270dd94fddf1
--- /dev/null
+++ b/Documentation/translations/zh_TW/filesystems/debugfs.rst
@@ -0,0 +1,224 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :doc:`../../../filesystems/debugfs`
+
+=======
+Debugfs
+=======
+
+譯者
+::
+
+	中文版維護者：羅楚成 Chucheng Luo <luochucheng@vivo.com>
+	中文版翻譯者：羅楚成 Chucheng Luo <luochucheng@vivo.com>
+	中文版校譯者: 羅楚成 Chucheng Luo <luochucheng@vivo.com>
+	繁體中文版校譯者: 胡皓文 Hu Haowen <src.res@email.cn>
+
+
+
+版權所有2020 羅楚成 <luochucheng@vivo.com>
+版權所有2021 胡皓文 Hu Haowen <src.res@email.cn>
+
+
+Debugfs是內核開發人員在用戶空間獲取信息的簡單方法。與/proc不同，proc只提供進程
+信息。也不像sysfs,具有嚴格的「每個文件一個值「的規則。debugfs根本沒有規則,開發
+人員可以在這裡放置他們想要的任何信息。debugfs文件系統也不能用作穩定的ABI接口。
+從理論上講，debugfs導出文件的時候沒有任何約束。但是[1]實際情況並不總是那麼
+簡單。即使是debugfs接口，也最好根據需要進行設計,並儘量保持接口不變。
+
+
+Debugfs通常使用以下命令安裝::
+
+    mount -t debugfs none /sys/kernel/debug
+
+（或等效的/etc/fstab行）。
+debugfs根目錄默認僅可由root用戶訪問。要更改對文件樹的訪問，請使用「 uid」，「 gid」
+和「 mode」掛載選項。請注意，debugfs API僅按照GPL協議導出到模塊。
+
+使用debugfs的代碼應包含<linux/debugfs.h>。然後，首先是創建至少一個目錄來保存
+一組debugfs文件::
+
+    struct dentry *debugfs_create_dir(const char *name, struct dentry *parent);
+
+如果成功，此調用將在指定的父目錄下創建一個名爲name的目錄。如果parent參數爲空，
+則會在debugfs根目錄中創建。創建目錄成功時，返回值是一個指向dentry結構體的指針。
+該dentry結構體的指針可用於在目錄中創建文件（以及最後將其清理乾淨）。ERR_PTR
+（-ERROR）返回值表明出錯。如果返回ERR_PTR（-ENODEV），則表明內核是在沒有debugfs
+支持的情況下構建的，並且下述函數都不會起作用。
+
+在debugfs目錄中創建文件的最通用方法是::
+
+    struct dentry *debugfs_create_file(const char *name, umode_t mode,
+				       struct dentry *parent, void *data,
+				       const struct file_operations *fops);
+
+在這裡，name是要創建的文件的名稱，mode描述了訪問文件應具有的權限，parent指向
+應該保存文件的目錄，data將存儲在產生的inode結構體的i_private欄位中，而fops是
+一組文件操作函數，這些函數中實現文件操作的具體行爲。至少，read（）和/或
+write（）操作應提供；其他可以根據需要包括在內。同樣的，返回值將是指向創建文件
+的dentry指針，錯誤時返回ERR_PTR（-ERROR），系統不支持debugfs時返回值爲ERR_PTR
+（-ENODEV）。創建一個初始大小的文件，可以使用以下函數代替::
+
+    struct dentry *debugfs_create_file_size(const char *name, umode_t mode,
+				struct dentry *parent, void *data,
+				const struct file_operations *fops,
+				loff_t file_size);
+
+file_size是初始文件大小。其他參數跟函數debugfs_create_file的相同。
+
+在許多情況下，沒必要自己去創建一組文件操作;對於一些簡單的情況,debugfs代碼提供
+了許多幫助函數。包含單個整數值的文件可以使用以下任何一項創建::
+
+    void debugfs_create_u8(const char *name, umode_t mode,
+			   struct dentry *parent, u8 *value);
+    void debugfs_create_u16(const char *name, umode_t mode,
+			    struct dentry *parent, u16 *value);
+    struct dentry *debugfs_create_u32(const char *name, umode_t mode,
+				      struct dentry *parent, u32 *value);
+    void debugfs_create_u64(const char *name, umode_t mode,
+			    struct dentry *parent, u64 *value);
+
+這些文件支持讀取和寫入給定值。如果某個文件不支持寫入，只需根據需要設置mode
+參數位。這些文件中的值以十進位表示；如果需要使用十六進位，可以使用以下函數
+替代::
+
+    void debugfs_create_x8(const char *name, umode_t mode,
+			   struct dentry *parent, u8 *value);
+    void debugfs_create_x16(const char *name, umode_t mode,
+			    struct dentry *parent, u16 *value);
+    void debugfs_create_x32(const char *name, umode_t mode,
+			    struct dentry *parent, u32 *value);
+    void debugfs_create_x64(const char *name, umode_t mode,
+			    struct dentry *parent, u64 *value);
+
+這些功能只有在開發人員知道導出值的大小的時候才有用。某些數據類型在不同的架構上
+有不同的寬度，這樣會使情況變得有些複雜。在這種特殊情況下可以使用以下函數::
+
+    void debugfs_create_size_t(const char *name, umode_t mode,
+			       struct dentry *parent, size_t *value);
+
+不出所料，此函數將創建一個debugfs文件來表示類型爲size_t的變量。
+
+同樣地，也有導出無符號長整型變量的函數，分別以十進位和十六進位表示如下::
+
+    struct dentry *debugfs_create_ulong(const char *name, umode_t mode,
+					struct dentry *parent,
+					unsigned long *value);
+    void debugfs_create_xul(const char *name, umode_t mode,
+			    struct dentry *parent, unsigned long *value);
+
+布爾值可以通過以下方式放置在debugfs中::
+
+    struct dentry *debugfs_create_bool(const char *name, umode_t mode,
+				       struct dentry *parent, bool *value);
+
+
+讀取結果文件將產生Y（對於非零值）或N，後跟換行符寫入的時候，它只接受大寫或小寫
+值或1或0。任何其他輸入將被忽略。
+
+同樣，atomic_t類型的值也可以放置在debugfs中::
+
+    void debugfs_create_atomic_t(const char *name, umode_t mode,
+				 struct dentry *parent, atomic_t *value)
+
+讀取此文件將獲得atomic_t值，寫入此文件將設置atomic_t值。
+
+另一個選擇是通過以下結構體和函數導出一個任意二進位數據塊::
+
+    struct debugfs_blob_wrapper {
+	void *data;
+	unsigned long size;
+    };
+
+    struct dentry *debugfs_create_blob(const char *name, umode_t mode,
+				       struct dentry *parent,
+				       struct debugfs_blob_wrapper *blob);
+
+讀取此文件將返回由指針指向debugfs_blob_wrapper結構體的數據。一些驅動使用「blobs」
+作爲一種返回幾行（靜態）格式化文本的簡單方法。這個函數可用於導出二進位信息，但
+似乎在主線中沒有任何代碼這樣做。請注意，使用debugfs_create_blob（）命令創建的
+所有文件是只讀的。
+
+如果您要轉儲一個寄存器塊（在開發過程中經常會這麼做，但是這樣的調試代碼很少上傳
+到主線中。Debugfs提供兩個函數：一個用於創建僅寄存器文件，另一個把一個寄存器塊
+插入一個順序文件中::
+
+    struct debugfs_reg32 {
+	char *name;
+	unsigned long offset;
+    };
+
+    struct debugfs_regset32 {
+	struct debugfs_reg32 *regs;
+	int nregs;
+	void __iomem *base;
+    };
+
+    struct dentry *debugfs_create_regset32(const char *name, umode_t mode,
+				     struct dentry *parent,
+				     struct debugfs_regset32 *regset);
+
+    void debugfs_print_regs32(struct seq_file *s, struct debugfs_reg32 *regs,
+			 int nregs, void __iomem *base, char *prefix);
+
+「base」參數可能爲0，但您可能需要使用__stringify構建reg32數組，實際上有許多寄存器
+名稱（宏）是寄存器塊在基址上的字節偏移量。
+
+如果要在debugfs中轉儲u32數組，可以使用以下函數創建文件::
+
+     void debugfs_create_u32_array(const char *name, umode_t mode,
+			struct dentry *parent,
+			u32 *array, u32 elements);
+
+「array」參數提供數據，而「elements」參數爲數組中元素的數量。注意：數組創建後，數組
+大小無法更改。
+
+有一個函數來創建與設備相關的seq_file::
+
+   struct dentry *debugfs_create_devm_seqfile(struct device *dev,
+				const char *name,
+				struct dentry *parent,
+				int (*read_fn)(struct seq_file *s,
+					void *data));
+
+「dev」參數是與此debugfs文件相關的設備，並且「read_fn」是一個函數指針，這個函數在
+列印seq_file內容的時候被回調。
+
+還有一些其他的面向目錄的函數::
+
+    struct dentry *debugfs_rename(struct dentry *old_dir,
+		                  struct dentry *old_dentry,
+		                  struct dentry *new_dir,
+				  const char *new_name);
+
+    struct dentry *debugfs_create_symlink(const char *name,
+                                          struct dentry *parent,
+                                          const char *target);
+
+調用debugfs_rename()將爲現有的debugfs文件重命名，可能同時切換目錄。 new_name
+函數調用之前不能存在；返回值爲old_dentry，其中包含更新的信息。可以使用
+debugfs_create_symlink（）創建符號連結。
+
+所有debugfs用戶必須考慮的一件事是：
+
+debugfs不會自動清除在其中創建的任何目錄。如果一個模塊在不顯式刪除debugfs目錄的
+情況下卸載模塊，結果將會遺留很多野指針，從而導致系統不穩定。因此，所有debugfs
+用戶-至少是那些可以作爲模塊構建的用戶-必須做模塊卸載的時候準備刪除在此創建的
+所有文件和目錄。一份文件可以通過以下方式刪除::
+
+    void debugfs_remove(struct dentry *dentry);
+
+dentry值可以爲NULL或錯誤值，在這種情況下，不會有任何文件被刪除。
+
+很久以前，內核開發者使用debugfs時需要記錄他們創建的每個dentry指針，以便最後所有
+文件都可以被清理掉。但是，現在debugfs用戶能調用以下函數遞歸清除之前創建的文件::
+
+    void debugfs_remove_recursive(struct dentry *dentry);
+
+如果將對應頂層目錄的dentry傳遞給以上函數，則該目錄下的整個層次結構將會被刪除。
+
+注釋：
+[1] http://lwn.net/Articles/309298/
+
diff --git a/Documentation/translations/zh_TW/filesystems/index.rst b/Documentation/translations/zh_TW/filesystems/index.rst
new file mode 100644
index 000000000000..4e5dde0dca3c
--- /dev/null
+++ b/Documentation/translations/zh_TW/filesystems/index.rst
@@ -0,0 +1,31 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/filesystems/index.rst <filesystems_index>`
+:Translator: Wang Wenhu <wenhu.wang@vivo.com>
+             Hu Haowen <src.res@email.cn>
+
+.. _tw_filesystems_index:
+
+========================
+Linux Kernel中的文件系統
+========================
+
+這份正在開發的手冊或許在未來某個輝煌的日子裡以易懂的形式將Linux虛擬\
+文件系統（VFS）層以及基於其上的各種文件系統如何工作呈現給大家。當前\
+可以看到下面的內容。
+
+文件系統
+========
+
+文件系統實現文檔。
+
+.. toctree::
+   :maxdepth: 2
+
+   virtiofs
+   debugfs
+   tmpfs
+
+
diff --git a/Documentation/translations/zh_TW/filesystems/sysfs.txt b/Documentation/translations/zh_TW/filesystems/sysfs.txt
new file mode 100644
index 000000000000..acd677f19d4f
--- /dev/null
+++ b/Documentation/translations/zh_TW/filesystems/sysfs.txt
@@ -0,0 +1,377 @@
+SPDX-License-Identifier: GPL-2.0
+
+Chinese translated version of Documentation/filesystems/sysfs.rst
+
+If you have any comment or update to the content, please contact the
+original document maintainer directly.  However, if you have a problem
+communicating in English you can also ask the Chinese maintainer for
+help.  Contact the Chinese maintainer if this translation is outdated
+or if there is a problem with the translation.
+
+Maintainer: Patrick Mochel	<mochel@osdl.org>
+		Mike Murphy <mamurph@cs.clemson.edu>
+Chinese maintainer: Fu Wei <tekkamanninja@gmail.com>
+---------------------------------------------------------------------
+Documentation/filesystems/sysfs.rst 的中文翻譯
+
+如果想評論或更新本文的內容，請直接聯繫原文檔的維護者。如果你使用英文
+交流有困難的話，也可以向中文版維護者求助。如果本翻譯更新不及時或者翻
+譯存在問題，請聯繫中文版維護者。
+英文版維護者： Patrick Mochel	<mochel@osdl.org>
+		Mike Murphy <mamurph@cs.clemson.edu>
+中文版維護者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
+中文版翻譯者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
+中文版校譯者： 傅煒 Fu Wei <tekkamanninja@gmail.com>
+繁體中文版校譯者：胡皓文 Hu Haowen <src.res@email.cn>
+
+
+以下爲正文
+---------------------------------------------------------------------
+sysfs - 用於導出內核對象(kobject)的文件系統
+
+Patrick Mochel	<mochel@osdl.org>
+Mike Murphy <mamurph@cs.clemson.edu>
+
+修訂:    16 August 2011
+原始版本:   10 January 2003
+
+
+sysfs 簡介:
+~~~~~~~~~~
+
+sysfs 是一個最初基於 ramfs 且位於內存的文件系統。它提供導出內核
+數據結構及其屬性，以及它們之間的關聯到用戶空間的方法。
+
+sysfs 始終與 kobject 的底層結構緊密相關。請閱讀
+Documentation/core-api/kobject.rst 文檔以獲得更多關於 kobject 接口的
+信息。
+
+
+使用 sysfs
+~~~~~~~~~~~
+
+只要內核配置中定義了 CONFIG_SYSFS ，sysfs 總是被編譯進內核。你可
+通過以下命令掛載它:
+
+    mount -t sysfs sysfs /sys
+
+
+創建目錄
+~~~~~~~~
+
+任何 kobject 在系統中註冊，就會有一個目錄在 sysfs 中被創建。這個
+目錄是作爲該 kobject 的父對象所在目錄的子目錄創建的，以準確地傳遞
+內核的對象層次到用戶空間。sysfs 中的頂層目錄代表著內核對象層次的
+共同祖先；例如：某些對象屬於某個子系統。
+
+Sysfs 在與其目錄關聯的 kernfs_node 對象中內部保存一個指向實現
+目錄的 kobject 的指針。以前，這個 kobject 指針被 sysfs 直接用於
+kobject 文件打開和關閉的引用計數。而現在的 sysfs 實現中，kobject
+引用計數只能通過 sysfs_schedule_callback() 函數直接修改。
+
+
+屬性
+~~~~
+
+kobject 的屬性可在文件系統中以普通文件的形式導出。Sysfs 爲屬性定義
+了面向文件 I/O 操作的方法，以提供對內核屬性的讀寫。
+
+
+屬性應爲 ASCII 碼文本文件。以一個文件只存儲一個屬性值爲宜。但一個
+文件只包含一個屬性值可能影響效率，所以一個包含相同數據類型的屬性值
+數組也被廣泛地接受。
+
+混合類型、表達多行數據以及一些怪異的數據格式會遭到強烈反對。這樣做是
+很丟臉的,而且其代碼會在未通知作者的情況下被重寫。
+
+
+一個簡單的屬性結構定義如下:
+
+struct attribute {
+        char                    * name;
+        struct module		*owner;
+        umode_t                 mode;
+};
+
+
+int sysfs_create_file(struct kobject * kobj, const struct attribute * attr);
+void sysfs_remove_file(struct kobject * kobj, const struct attribute * attr);
+
+
+一個單獨的屬性結構並不包含讀寫其屬性值的方法。子系統最好爲增刪特定
+對象類型的屬性定義自己的屬性結構體和封裝函數。
+
+例如:驅動程序模型定義的 device_attribute 結構體如下:
+
+struct device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+int device_create_file(struct device *, const struct device_attribute *);
+void device_remove_file(struct device *, const struct device_attribute *);
+
+爲了定義設備屬性，同時定義了一下輔助宏:
+
+#define DEVICE_ATTR(_name, _mode, _show, _store) \
+struct device_attribute dev_attr_##_name = __ATTR(_name, _mode, _show, _store)
+
+例如:聲明
+
+static DEVICE_ATTR(foo, S_IWUSR | S_IRUGO, show_foo, store_foo);
+
+等同於如下代碼：
+
+static struct device_attribute dev_attr_foo = {
+       .attr	= {
+		.name = "foo",
+		.mode = S_IWUSR | S_IRUGO,
+		.show = show_foo,
+		.store = store_foo,
+	},
+};
+
+
+子系統特有的回調函數
+~~~~~~~~~~~~~~~~~~~
+
+當一個子系統定義一個新的屬性類型時，必須實現一系列的 sysfs 操作，
+以幫助讀寫調用實現屬性所有者的顯示和儲存方法。
+
+struct sysfs_ops {
+        ssize_t (*show)(struct kobject *, struct attribute *, char *);
+        ssize_t (*store)(struct kobject *, struct attribute *, const char *, size_t);
+};
+
+[子系統應已經定義了一個 struct kobj_type 結構體作爲這個類型的
+描述符，並在此保存 sysfs_ops 的指針。更多的信息參見 kobject 的
+文檔]
+
+sysfs 會爲這個類型調用適當的方法。當一個文件被讀寫時，這個方法會
+將一般的kobject 和 attribute 結構體指針轉換爲適當的指針類型後
+調用相關聯的函數。
+
+
+示例:
+
+#define to_dev_attr(_attr) container_of(_attr, struct device_attribute, attr)
+
+static ssize_t dev_attr_show(struct kobject *kobj, struct attribute *attr,
+                             char *buf)
+{
+        struct device_attribute *dev_attr = to_dev_attr(attr);
+        struct device *dev = kobj_to_dev(kobj);
+        ssize_t ret = -EIO;
+
+        if (dev_attr->show)
+                ret = dev_attr->show(dev, dev_attr, buf);
+        if (ret >= (ssize_t)PAGE_SIZE) {
+                printk("dev_attr_show: %pS returned bad count\n",
+                                dev_attr->show);
+        }
+        return ret;
+}
+
+
+
+讀寫屬性數據
+~~~~~~~~~~~~
+
+在聲明屬性時，必須指定 show() 或 store() 方法，以實現屬性的
+讀或寫。這些方法的類型應該和以下的設備屬性定義一樣簡單。
+
+ssize_t (*show)(struct device *dev, struct device_attribute *attr, char *buf);
+ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+                 const char *buf, size_t count);
+
+也就是說,他們應只以一個處理對象、一個屬性和一個緩衝指針作爲參數。
+
+sysfs 會分配一個大小爲 (PAGE_SIZE) 的緩衝區並傳遞給這個方法。
+Sysfs 將會爲每次讀寫操作調用一次這個方法。這使得這些方法在執行時
+會出現以下的行爲:
+
+- 在讀方面（read(2)），show() 方法應該填充整個緩衝區。回想屬性
+  應只導出了一個屬性值或是一個同類型屬性值的數組，所以這個代價將
+  不會不太高。
+
+  這使得用戶空間可以局部地讀和任意的向前搜索整個文件。如果用戶空間
+  向後搜索到零或使用『0』偏移執行一個pread(2)操作，show()方法將
+  再次被調用，以重新填充緩存。
+
+- 在寫方面（write(2)），sysfs 希望在第一次寫操作時得到整個緩衝區。
+  之後 Sysfs 傳遞整個緩衝區給 store() 方法。
+
+  當要寫 sysfs 文件時，用戶空間進程應首先讀取整個文件，修該想要
+  改變的值，然後回寫整個緩衝區。
+
+  在讀寫屬性值時，屬性方法的執行應操作相同的緩衝區。
+
+註記:
+
+- 寫操作導致的 show() 方法重載，會忽略當前文件位置。
+
+- 緩衝區應總是 PAGE_SIZE 大小。對於i386，這個值爲4096。
+
+- show() 方法應該返回寫入緩衝區的字節數，也就是 scnprintf()的
+  返回值。
+
+- show() 方法在將格式化返回值返回用戶空間的時候，禁止使用snprintf()。
+  如果可以保證不會發生緩衝區溢出，可以使用sprintf()，否則必須使用
+  scnprintf()。
+
+- store() 應返回緩衝區的已用字節數。如果整個緩存都已填滿，只需返回
+  count 參數。
+
+- show() 或 store() 可以返回錯誤值。當得到一個非法值，必須返回一個
+  錯誤值。
+
+- 一個傳遞給方法的對象將會通過 sysfs 調用對象內嵌的引用計數固定在
+  內存中。儘管如此，對象代表的物理實體(如設備)可能已不存在。如有必要，
+  應該實現一個檢測機制。
+
+一個簡單的(未經實驗證實的)設備屬性實現如下：
+
+static ssize_t show_name(struct device *dev, struct device_attribute *attr,
+                         char *buf)
+{
+	return scnprintf(buf, PAGE_SIZE, "%s\n", dev->name);
+}
+
+static ssize_t store_name(struct device *dev, struct device_attribute *attr,
+                          const char *buf, size_t count)
+{
+        snprintf(dev->name, sizeof(dev->name), "%.*s",
+                 (int)min(count, sizeof(dev->name) - 1), buf);
+	return count;
+}
+
+static DEVICE_ATTR(name, S_IRUGO, show_name, store_name);
+
+
+（注意：真正的實現不允許用戶空間設置設備名。）
+
+頂層目錄布局
+~~~~~~~~~~~~
+
+sysfs 目錄的安排顯示了內核數據結構之間的關係。
+
+頂層 sysfs 目錄如下:
+
+block/
+bus/
+class/
+dev/
+devices/
+firmware/
+net/
+fs/
+
+devices/ 包含了一個設備樹的文件系統表示。他直接映射了內部的內核
+設備樹，反映了設備的層次結構。
+
+bus/ 包含了內核中各種總線類型的平面目錄布局。每個總線目錄包含兩個
+子目錄:
+
+	devices/
+	drivers/
+
+devices/ 包含了系統中出現的每個設備的符號連結，他們指向 root/ 下的
+設備目錄。
+
+drivers/ 包含了每個已爲特定總線上的設備而掛載的驅動程序的目錄(這裡
+假定驅動沒有跨越多個總線類型)。
+
+fs/ 包含了一個爲文件系統設立的目錄。現在每個想要導出屬性的文件系統必須
+在 fs/ 下創建自己的層次結構(參見Documentation/filesystems/fuse.rst)。
+
+dev/ 包含兩個子目錄： char/ 和 block/。在這兩個子目錄中，有以
+<major>:<minor> 格式命名的符號連結。這些符號連結指向 sysfs 目錄
+中相應的設備。/sys/dev 提供一個通過一個 stat(2) 操作結果，查找
+設備 sysfs 接口快捷的方法。
+
+更多有關 driver-model 的特性信息可以在 Documentation/driver-api/driver-model/
+中找到。
+
+
+TODO: 完成這一節。
+
+
+當前接口
+~~~~~~~~
+
+以下的接口層普遍存在於當前的sysfs中:
+
+- 設備 (include/linux/device.h)
+----------------------------------
+結構體:
+
+struct device_attribute {
+	struct attribute	attr;
+	ssize_t (*show)(struct device *dev, struct device_attribute *attr,
+			char *buf);
+	ssize_t (*store)(struct device *dev, struct device_attribute *attr,
+			 const char *buf, size_t count);
+};
+
+聲明:
+
+DEVICE_ATTR(_name, _mode, _show, _store);
+
+增/刪屬性:
+
+int device_create_file(struct device *dev, const struct device_attribute * attr);
+void device_remove_file(struct device *dev, const struct device_attribute * attr);
+
+
+- 總線驅動程序 (include/linux/device.h)
+--------------------------------------
+結構體:
+
+struct bus_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct bus_type *, char * buf);
+        ssize_t (*store)(struct bus_type *, const char * buf, size_t count);
+};
+
+聲明:
+
+BUS_ATTR(_name, _mode, _show, _store)
+
+增/刪屬性:
+
+int bus_create_file(struct bus_type *, struct bus_attribute *);
+void bus_remove_file(struct bus_type *, struct bus_attribute *);
+
+
+- 設備驅動程序 (include/linux/device.h)
+-----------------------------------------
+
+結構體:
+
+struct driver_attribute {
+        struct attribute        attr;
+        ssize_t (*show)(struct device_driver *, char * buf);
+        ssize_t (*store)(struct device_driver *, const char * buf,
+                         size_t count);
+};
+
+聲明:
+
+DRIVER_ATTR(_name, _mode, _show, _store)
+
+增/刪屬性：
+
+int driver_create_file(struct device_driver *, const struct driver_attribute *);
+void driver_remove_file(struct device_driver *, const struct driver_attribute *);
+
+
+文檔
+~~~~
+
+sysfs 目錄結構以及其中包含的屬性定義了一個內核與用戶空間之間的 ABI。
+對於任何 ABI，其自身的穩定和適當的文檔是非常重要的。所有新的 sysfs
+屬性必須在 Documentation/ABI 中有文檔。詳見 Documentation/ABI/README。
+
diff --git a/Documentation/translations/zh_TW/filesystems/tmpfs.rst b/Documentation/translations/zh_TW/filesystems/tmpfs.rst
new file mode 100644
index 000000000000..8d753a34785b
--- /dev/null
+++ b/Documentation/translations/zh_TW/filesystems/tmpfs.rst
@@ -0,0 +1,148 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: Documentation/filesystems/tmpfs.rst
+
+Translated by Wang Qing <wangqing@vivo.com>
+and Hu Haowen <src.res@email.cn>
+
+=====
+Tmpfs
+=====
+
+Tmpfs是一個將所有文件都保存在虛擬內存中的文件系統。
+
+tmpfs中的所有內容都是臨時的，也就是說沒有任何文件會在硬碟上創建。
+如果卸載tmpfs實例，所有保存在其中的文件都會丟失。
+
+tmpfs將所有文件保存在內核緩存中，隨著文件內容增長或縮小可以將不需要的
+頁面swap出去。它具有最大限制，可以通過「mount -o remount ...」調整。
+
+和ramfs（創建tmpfs的模板）相比，tmpfs包含交換和限制檢查。和tmpfs相似的另
+一個東西是RAM磁碟（/dev/ram*），可以在物理RAM中模擬固定大小的硬碟，並在
+此之上創建一個普通的文件系統。Ramdisks無法swap，因此無法調整它們的大小。
+
+由於tmpfs完全保存於頁面緩存和swap中，因此所有tmpfs頁面將在/proc/meminfo
+中顯示爲「Shmem」，而在free(1)中顯示爲「Shared」。請注意，這些計數還包括
+共享內存(shmem，請參閱ipcs(1))。獲得計數的最可靠方法是使用df(1)和du(1)。
+
+tmpfs具有以下用途：
+
+1) 內核總有一個無法看到的內部掛載，用於共享匿名映射和SYSV共享內存。
+
+   掛載不依賴於CONFIG_TMPFS。如果CONFIG_TMPFS未設置，tmpfs對用戶不可見。
+   但是內部機制始終存在。
+
+2) glibc 2.2及更高版本期望將tmpfs掛載在/dev/shm上以用於POSIX共享內存
+   (shm_open，shm_unlink)。添加內容到/etc/fstab應注意如下：
+
+	tmpfs	/dev/shm	tmpfs	defaults	0 0
+
+   使用時需要記住創建掛載tmpfs的目錄。
+
+   SYSV共享內存無需掛載，內部已默認支持。(在2.3內核版本中，必須掛載
+   tmpfs的前身(shm fs)才能使用SYSV共享內存)
+
+3) 很多人（包括我）都覺的在/tmp和/var/tmp上掛載非常方便，並具有較大的
+   swap分區。目前循環掛載tmpfs可以正常工作，所以大多數發布都應當可以
+   使用mkinitrd通過/tmp訪問/tmp。
+
+4) 也許還有更多我不知道的地方:-)
+
+
+tmpfs有三個用於調整大小的掛載選項：
+
+=========  ===========================================================
+size       tmpfs實例分配的字節數限制。默認值是不swap時物理RAM的一半。
+           如果tmpfs實例過大，機器將死鎖，因爲OOM處理將無法釋放該內存。
+nr_blocks  與size相同，但以PAGE_SIZE爲單位。
+nr_inodes  tmpfs實例的最大inode個數。默認值是物理內存頁數的一半，或者
+           (有高端內存的機器)低端內存RAM的頁數，二者以較低者為準。
+=========  ===========================================================
+
+這些參數接受後綴k，m或g表示千，兆和千兆字節，可以在remount時更改。
+size參數也接受後綴％用來限制tmpfs實例占用物理RAM的百分比：
+未指定size或nr_blocks時，默認值爲size=50％
+
+如果nr_blocks=0（或size=0），block個數將不受限制；如果nr_inodes=0，
+inode個數將不受限制。這樣掛載通常是不明智的，因爲它允許任何具有寫權限的
+用戶通過訪問tmpfs耗盡機器上的所有內存；但同時這樣做也會增強在多個CPU的
+場景下的訪問。
+
+tmpfs具有爲所有文件設置NUMA內存分配策略掛載選項(如果啓用了CONFIG_NUMA),
+可以通過「mount -o remount ...」調整
+
+======================== =========================
+mpol=default             採用進程分配策略
+                         (請參閱 set_mempolicy(2))
+mpol=prefer:Node         傾向從給定的節點分配
+mpol=bind:NodeList       只允許從指定的鍊表分配
+mpol=interleave          傾向於依次從每個節點分配
+mpol=interleave:NodeList 依次從每個節點分配
+mpol=local               優先本地節點分配內存
+======================== =========================
+
+NodeList格式是以逗號分隔的十進位數字表示大小和範圍，最大和最小範圍是用-
+分隔符的十進位數來表示。例如，mpol=bind0-3,5,7,9-15
+
+帶有有效NodeList的內存策略將按指定格式保存，在創建文件時使用。當任務在該
+文件系統上創建文件時，會使用到掛載時的內存策略NodeList選項，如果設置的話，
+由調用任務的cpuset[請參見Documentation/admin-guide/cgroup-v1/cpusets.rst]
+以及下面列出的可選標誌約束。如果NodeLists爲設置爲空集，則文件的內存策略將
+恢復爲「默認」策略。
+
+NUMA內存分配策略有可選標誌，可以用於模式結合。在掛載tmpfs時指定這些可選
+標誌可以在NodeList之前生效。
+Documentation/admin-guide/mm/numa_memory_policy.rst列出所有可用的內存
+分配策略模式標誌及其對內存策略。
+
+::
+
+	=static		相當於	MPOL_F_STATIC_NODES
+	=relative	相當於	MPOL_F_RELATIVE_NODES
+
+例如，mpol=bind=staticNodeList相當於MPOL_BIND|MPOL_F_STATIC_NODES的分配策略
+
+請注意，如果內核不支持NUMA，那麼使用mpol選項掛載tmpfs將會失敗；nodelist指定不
+在線的節點也會失敗。如果您的系統依賴於此，但內核會運行不帶NUMA功能(也許是安全
+revocery內核)，或者具有較少的節點在線，建議從自動模式中省略mpol選項掛載選項。
+可以在以後通過「mount -o remount,mpol=Policy:NodeList MountPoint」添加到掛載點。
+
+要指定初始根目錄，可以使用如下掛載選項：
+
+====	====================
+模式	權限用八進位數字表示
+uid	用戶ID
+gid	組ID
+====	====================
+
+這些選項對remount沒有任何影響。您可以通過chmod(1),chown(1)和chgrp(1)的更改
+已經掛載的參數。
+
+tmpfs具有選擇32位還是64位inode的掛載選項：
+
+=======   =============
+inode64   使用64位inode
+inode32   使用32位inode
+=======   =============
+
+在32位內核上，默認是inode32，掛載時指定inode64會被拒絕。
+在64位內核上，默認配置是CONFIG_TMPFS_INODE64。inode64避免了單個設備上可能有多個
+具有相同inode編號的文件；比如32位應用程式使用glibc如果長期訪問tmpfs，一旦達到33
+位inode編號，就有EOVERFLOW失敗的危險，無法打開大於2GiB的文件，並返回EINVAL。
+
+所以'mount -t tmpfs -o size=10G,nr_inodes=10k,mode=700 tmpfs /mytmpfs'將在
+/mytmpfs上掛載tmpfs實例，分配只能由root用戶訪問的10GB RAM/SWAP，可以有10240個
+inode的實例。
+
+
+:作者:
+   Christoph Rohland <cr@sap.com>, 1.12.01
+:更新:
+   Hugh Dickins, 4 June 2007
+:更新:
+   KOSAKI Motohiro, 16 Mar 2010
+:更新:
+   Chris Down, 13 July 2020
+
diff --git a/Documentation/translations/zh_TW/filesystems/virtiofs.rst b/Documentation/translations/zh_TW/filesystems/virtiofs.rst
new file mode 100644
index 000000000000..2b05e84375dd
--- /dev/null
+++ b/Documentation/translations/zh_TW/filesystems/virtiofs.rst
@@ -0,0 +1,61 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+.. include:: ../disclaimer-zh_TW.rst
+
+:Original: :ref:`Documentation/filesystems/virtiofs.rst <virtiofs_index>`
+
+譯者
+::
+
+	中文版維護者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
+	中文版翻譯者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
+	中文版校譯者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
+	中文版校譯者： 王文虎 Wang Wenhu <wenhu.wang@vivo.com>
+	繁體中文版校譯者：胡皓文 Hu Haowen <src.res@email.cn>
+
+===========================================
+virtiofs: virtio-fs 主機<->客機共享文件系統
+===========================================
+
+- Copyright (C) 2020 Vivo Communication Technology Co. Ltd.
+
+介紹
+====
+Linux的virtiofs文件系統實現了一個半虛擬化VIRTIO類型「virtio-fs」設備的驅動，通過該\
+類型設備實現客機<->主機文件系統共享。它允許客機掛載一個已經導出到主機的目錄。
+
+客機通常需要訪問主機或者遠程系統上的文件。使用場景包括：在新客機安裝時讓文件對其\
+可見；從主機上的根文件系統啓動；對無狀態或臨時客機提供持久存儲和在客機之間共享目錄。
+
+儘管在某些任務可能通過使用已有的網絡文件系統完成，但是卻需要非常難以自動化的配置\
+步驟，且將存儲網絡暴露給客機。而virtio-fs設備通過提供不經過網絡的文件系統訪問文件\
+的設計方式解決了這些問題。
+
+另外，virto-fs設備發揮了主客機共存的優點提高了性能，並且提供了網絡文件系統所不具備
+的一些語義功能。
+
+用法
+====
+以``myfs``標籤將文件系統掛載到``/mnt``:
+
+.. code-block:: sh
+
+  guest# mount -t virtiofs myfs /mnt
+
+請查閱 https://virtio-fs.gitlab.io/ 了解配置QEMU和virtiofsd守護程序的詳細信息。
+
+內幕
+====
+由於virtio-fs設備將FUSE協議用於文件系統請求，因此Linux的virtiofs文件系統與FUSE文\
+件系統客戶端緊密集成在一起。客機充當FUSE客戶端而主機充當FUSE伺服器，內核與用戶空\
+間之間的/dev/fuse接口由virtio-fs設備接口代替。
+
+FUSE請求被置於虛擬隊列中由主機處理。主機填充緩衝區中的響應部分，而客機處理請求的完成部分。
+
+將/dev/fuse映射到虛擬隊列需要解決/dev/fuse和虛擬隊列之間語義上的差異。每次讀取\
+/dev/fuse設備時，FUSE客戶端都可以選擇要傳輸的請求，從而可以使某些請求優先於其他\
+請求。虛擬隊列有其隊列語義，無法更改已入隊請求的順序。在虛擬隊列已滿的情況下尤
+其關鍵，因爲此時不可能加入高優先級的請求。爲了解決此差異，virtio-fs設備採用「hiprio」\
+（高優先級）虛擬隊列，專門用於有別於普通請求的高優先級請求。
+
+
diff --git a/Documentation/translations/zh_TW/index.rst b/Documentation/translations/zh_TW/index.rst
index c02c4b5281e6..2a281036c406 100644
--- a/Documentation/translations/zh_TW/index.rst
+++ b/Documentation/translations/zh_TW/index.rst
@@ -89,6 +89,12 @@ TODOList:
 大部分信息都是直接從內核原始碼獲取的，並根據需要添加補充材料（或者至少是在
 我們設法添加的時候——可能不是所有的都是有需要的）。
 
+.. toctree::
+   :maxdepth: 2
+
+   cpu-freq/index
+   filesystems/index
+
 TODOList:
 
 * driver-api/index
@@ -97,7 +103,6 @@ TODOList:
 * accounting/index
 * block/index
 * cdrom/index
-* cpu-freq/index
 * ide/index
 * fb/index
 * fpga/index
@@ -123,7 +128,6 @@ TODOList:
 * security/index
 * sound/index
 * crypto/index
-* filesystems/index
 * vm/index
 * bpf/index
 * usb/index
@@ -136,6 +140,11 @@ TODOList:
 體系結構無關文檔
 ----------------
 
+.. toctree::
+   :maxdepth: 2
+
+   arm64/index
+
 TODOList:
 
 * asm-annotations
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index c6212c2d5fe3..a6729c8cf063 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -3357,6 +3357,7 @@ flags which can include the following:
   - KVM_GUESTDBG_INJECT_DB:     inject DB type exception [x86]
   - KVM_GUESTDBG_INJECT_BP:     inject BP type exception [x86]
   - KVM_GUESTDBG_EXIT_PENDING:  trigger an immediate guest exit [s390]
+  - KVM_GUESTDBG_BLOCKIRQ:      avoid injecting interrupts/NMI/SMI [x86]
 
 For example KVM_GUESTDBG_USE_SW_BP indicates that software breakpoints
 are enabled in memory so we need to ensure breakpoint exceptions are
@@ -5208,6 +5209,9 @@ by a string of size ``name_size``.
 	#define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
 	#define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
 	#define KVM_STATS_TYPE_PEAK		(0x2 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_LINEAR_HIST	(0x3 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_LOG_HIST		(0x4 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_LOG_HIST
 
 	#define KVM_STATS_UNIT_SHIFT		4
 	#define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
@@ -5215,18 +5219,20 @@ by a string of size ``name_size``.
 	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
 	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
 
 	#define KVM_STATS_BASE_SHIFT		8
 	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
 	#define KVM_STATS_BASE_POW10		(0x0 << KVM_STATS_BASE_SHIFT)
 	#define KVM_STATS_BASE_POW2		(0x1 << KVM_STATS_BASE_SHIFT)
+	#define KVM_STATS_BASE_MAX		KVM_STATS_BASE_POW2
 
 	struct kvm_stats_desc {
 		__u32 flags;
 		__s16 exponent;
 		__u16 size;
 		__u32 offset;
-		__u32 unused;
+		__u32 bucket_size;
 		char name[];
 	};
 
@@ -5237,21 +5243,35 @@ The following flags are supported:
 Bits 0-3 of ``flags`` encode the type:
 
   * ``KVM_STATS_TYPE_CUMULATIVE``
-    The statistics data is cumulative. The value of data can only be increased.
+    The statistics reports a cumulative count. The value of data can only be increased.
     Most of the counters used in KVM are of this type.
     The corresponding ``size`` field for this type is always 1.
     All cumulative statistics data are read/write.
   * ``KVM_STATS_TYPE_INSTANT``
-    The statistics data is instantaneous. Its value can be increased or
+    The statistics reports an instantaneous value. Its value can be increased or
     decreased. This type is usually used as a measurement of some resources,
     like the number of dirty pages, the number of large pages, etc.
     All instant statistics are read only.
     The corresponding ``size`` field for this type is always 1.
   * ``KVM_STATS_TYPE_PEAK``
-    The statistics data is peak. The value of data can only be increased, and
-    represents a peak value for a measurement, for example the maximum number
+    The statistics data reports a peak value, for example the maximum number
     of items in a hash table bucket, the longest time waited and so on.
+    The value of data can only be increased.
     The corresponding ``size`` field for this type is always 1.
+  * ``KVM_STATS_TYPE_LINEAR_HIST``
+    The statistic is reported as a linear histogram. The number of
+    buckets is specified by the ``size`` field. The size of buckets is specified
+    by the ``hist_param`` field. The range of the Nth bucket (1 <= N < ``size``)
+    is [``hist_param``*(N-1), ``hist_param``*N), while the range of the last
+    bucket is [``hist_param``*(``size``-1), +INF). (+INF means positive infinity
+    value.) The bucket value indicates how many samples fell in the bucket's range.
+  * ``KVM_STATS_TYPE_LOG_HIST``
+    The statistic is reported as a logarithmic histogram. The number of
+    buckets is specified by the ``size`` field. The range of the first bucket is
+    [0, 1), while the range of the last bucket is [pow(2, ``size``-2), +INF).
+    Otherwise, The Nth bucket (1 < N < ``size``) covers
+    [pow(2, N-2), pow(2, N-1)). The bucket value indicates how many samples fell
+    in the bucket's range.
 
 Bits 4-7 of ``flags`` encode the unit:
 
@@ -5286,9 +5306,9 @@ unsigned 64bit data.
 The ``offset`` field is the offset from the start of Data Block to the start of
 the corresponding statistics data.
 
-The ``unused`` field is reserved for future support for other types of
-statistics data, like log/linear histogram. Its value is always 0 for the types
-defined above.
+The ``bucket_size`` field is used as a parameter for histogram statistics data.
+It is only used by linear histogram statistics data, specifying the size of a
+bucket.
 
 The ``name`` field is the name string of the statistics data. The name string
 starts at the end of ``struct kvm_stats_desc``.  The maximum length including
diff --git a/Documentation/virt/kvm/locking.rst b/Documentation/virt/kvm/locking.rst
index 88fa495abbac..5d27da356836 100644
--- a/Documentation/virt/kvm/locking.rst
+++ b/Documentation/virt/kvm/locking.rst
@@ -21,6 +21,12 @@ The acquisition orders for mutexes are as follows:
   can be taken inside a kvm->srcu read-side critical section,
   while kvm->slots_lock cannot.
 
+- kvm->mn_active_invalidate_count ensures that pairs of
+  invalidate_range_start() and invalidate_range_end() callbacks
+  use the same memslots array.  kvm->slots_lock and kvm->slots_arch_lock
+  are taken on the waiting side in install_new_memslots, so MMU notifiers
+  must not take either kvm->slots_lock or kvm->slots_arch_lock.
+
 On x86:
 
 - vcpu->mutex is taken outside kvm->arch.hyperv.hv_lock
diff --git a/Documentation/vm/damon/api.rst b/Documentation/vm/damon/api.rst
new file mode 100644
index 000000000000..08f34df45523
--- /dev/null
+++ b/Documentation/vm/damon/api.rst
@@ -0,0 +1,20 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=============
+API Reference
+=============
+
+Kernel space programs can use every feature of DAMON using below APIs.  All you
+need to do is including ``damon.h``, which is located in ``include/linux/`` of
+the source tree.
+
+Structures
+==========
+
+.. kernel-doc:: include/linux/damon.h
+
+
+Functions
+=========
+
+.. kernel-doc:: mm/damon/core.c
diff --git a/Documentation/vm/damon/design.rst b/Documentation/vm/damon/design.rst
new file mode 100644
index 000000000000..b05159c295f4
--- /dev/null
+++ b/Documentation/vm/damon/design.rst
@@ -0,0 +1,166 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======
+Design
+======
+
+Configurable Layers
+===================
+
+DAMON provides data access monitoring functionality while making the accuracy
+and the overhead controllable.  The fundamental access monitorings require
+primitives that dependent on and optimized for the target address space.  On
+the other hand, the accuracy and overhead tradeoff mechanism, which is the core
+of DAMON, is in the pure logic space.  DAMON separates the two parts in
+different layers and defines its interface to allow various low level
+primitives implementations configurable with the core logic.
+
+Due to this separated design and the configurable interface, users can extend
+DAMON for any address space by configuring the core logics with appropriate low
+level primitive implementations.  If appropriate one is not provided, users can
+implement the primitives on their own.
+
+For example, physical memory, virtual memory, swap space, those for specific
+processes, NUMA nodes, files, and backing memory devices would be supportable.
+Also, if some architectures or devices support special optimized access check
+primitives, those will be easily configurable.
+
+
+Reference Implementations of Address Space Specific Primitives
+==============================================================
+
+The low level primitives for the fundamental access monitoring are defined in
+two parts:
+
+1. Identification of the monitoring target address range for the address space.
+2. Access check of specific address range in the target space.
+
+DAMON currently provides the implementation of the primitives for only the
+virtual address spaces. Below two subsections describe how it works.
+
+
+VMA-based Target Address Range Construction
+-------------------------------------------
+
+Only small parts in the super-huge virtual address space of the processes are
+mapped to the physical memory and accessed.  Thus, tracking the unmapped
+address regions is just wasteful.  However, because DAMON can deal with some
+level of noise using the adaptive regions adjustment mechanism, tracking every
+mapping is not strictly required but could even incur a high overhead in some
+cases.  That said, too huge unmapped areas inside the monitoring target should
+be removed to not take the time for the adaptive mechanism.
+
+For the reason, this implementation converts the complex mappings to three
+distinct regions that cover every mapped area of the address space.  The two
+gaps between the three regions are the two biggest unmapped areas in the given
+address space.  The two biggest unmapped areas would be the gap between the
+heap and the uppermost mmap()-ed region, and the gap between the lowermost
+mmap()-ed region and the stack in most of the cases.  Because these gaps are
+exceptionally huge in usual address spaces, excluding these will be sufficient
+to make a reasonable trade-off.  Below shows this in detail::
+
+    <heap>
+    <BIG UNMAPPED REGION 1>
+    <uppermost mmap()-ed region>
+    (small mmap()-ed regions and munmap()-ed regions)
+    <lowermost mmap()-ed region>
+    <BIG UNMAPPED REGION 2>
+    <stack>
+
+
+PTE Accessed-bit Based Access Check
+-----------------------------------
+
+The implementation for the virtual address space uses PTE Accessed-bit for
+basic access checks.  It finds the relevant PTE Accessed bit from the address
+by walking the page table for the target task of the address.  In this way, the
+implementation finds and clears the bit for next sampling target address and
+checks whether the bit set again after one sampling period.  This could disturb
+other kernel subsystems using the Accessed bits, namely Idle page tracking and
+the reclaim logic.  To avoid such disturbances, DAMON makes it mutually
+exclusive with Idle page tracking and uses ``PG_idle`` and ``PG_young`` page
+flags to solve the conflict with the reclaim logic, as Idle page tracking does.
+
+
+Address Space Independent Core Mechanisms
+=========================================
+
+Below four sections describe each of the DAMON core mechanisms and the five
+monitoring attributes, ``sampling interval``, ``aggregation interval``,
+``regions update interval``, ``minimum number of regions``, and ``maximum
+number of regions``.
+
+
+Access Frequency Monitoring
+---------------------------
+
+The output of DAMON says what pages are how frequently accessed for a given
+duration.  The resolution of the access frequency is controlled by setting
+``sampling interval`` and ``aggregation interval``.  In detail, DAMON checks
+access to each page per ``sampling interval`` and aggregates the results.  In
+other words, counts the number of the accesses to each page.  After each
+``aggregation interval`` passes, DAMON calls callback functions that previously
+registered by users so that users can read the aggregated results and then
+clears the results.  This can be described in below simple pseudo-code::
+
+    while monitoring_on:
+        for page in monitoring_target:
+            if accessed(page):
+                nr_accesses[page] += 1
+        if time() % aggregation_interval == 0:
+            for callback in user_registered_callbacks:
+                callback(monitoring_target, nr_accesses)
+            for page in monitoring_target:
+                nr_accesses[page] = 0
+        sleep(sampling interval)
+
+The monitoring overhead of this mechanism will arbitrarily increase as the
+size of the target workload grows.
+
+
+Region Based Sampling
+---------------------
+
+To avoid the unbounded increase of the overhead, DAMON groups adjacent pages
+that assumed to have the same access frequencies into a region.  As long as the
+assumption (pages in a region have the same access frequencies) is kept, only
+one page in the region is required to be checked.  Thus, for each ``sampling
+interval``, DAMON randomly picks one page in each region, waits for one
+``sampling interval``, checks whether the page is accessed meanwhile, and
+increases the access frequency of the region if so.  Therefore, the monitoring
+overhead is controllable by setting the number of regions.  DAMON allows users
+to set the minimum and the maximum number of regions for the trade-off.
+
+This scheme, however, cannot preserve the quality of the output if the
+assumption is not guaranteed.
+
+
+Adaptive Regions Adjustment
+---------------------------
+
+Even somehow the initial monitoring target regions are well constructed to
+fulfill the assumption (pages in same region have similar access frequencies),
+the data access pattern can be dynamically changed.  This will result in low
+monitoring quality.  To keep the assumption as much as possible, DAMON
+adaptively merges and splits each region based on their access frequency.
+
+For each ``aggregation interval``, it compares the access frequencies of
+adjacent regions and merges those if the frequency difference is small.  Then,
+after it reports and clears the aggregated access frequency of each region, it
+splits each region into two or three regions if the total number of regions
+will not exceed the user-specified maximum number of regions after the split.
+
+In this way, DAMON provides its best-effort quality and minimal overhead while
+keeping the bounds users set for their trade-off.
+
+
+Dynamic Target Space Updates Handling
+-------------------------------------
+
+The monitoring target address range could dynamically changed.  For example,
+virtual memory could be dynamically mapped and unmapped.  Physical memory could
+be hot-plugged.
+
+As the changes could be quite frequent in some cases, DAMON checks the dynamic
+memory mapping changes and applies it to the abstracted target area only for
+each of a user-specified time interval (``regions update interval``).
diff --git a/Documentation/vm/damon/faq.rst b/Documentation/vm/damon/faq.rst
new file mode 100644
index 000000000000..cb3d8b585a8b
--- /dev/null
+++ b/Documentation/vm/damon/faq.rst
@@ -0,0 +1,51 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+Frequently Asked Questions
+==========================
+
+Why a new subsystem, instead of extending perf or other user space tools?
+=========================================================================
+
+First, because it needs to be lightweight as much as possible so that it can be
+used online, any unnecessary overhead such as kernel - user space context
+switching cost should be avoided.  Second, DAMON aims to be used by other
+programs including the kernel.  Therefore, having a dependency on specific
+tools like perf is not desirable.  These are the two biggest reasons why DAMON
+is implemented in the kernel space.
+
+
+Can 'idle pages tracking' or 'perf mem' substitute DAMON?
+=========================================================
+
+Idle page tracking is a low level primitive for access check of the physical
+address space.  'perf mem' is similar, though it can use sampling to minimize
+the overhead.  On the other hand, DAMON is a higher-level framework for the
+monitoring of various address spaces.  It is focused on memory management
+optimization and provides sophisticated accuracy/overhead handling mechanisms.
+Therefore, 'idle pages tracking' and 'perf mem' could provide a subset of
+DAMON's output, but cannot substitute DAMON.
+
+
+Does DAMON support virtual memory only?
+=======================================
+
+No.  The core of the DAMON is address space independent.  The address space
+specific low level primitive parts including monitoring target regions
+constructions and actual access checks can be implemented and configured on the
+DAMON core by the users.  In this way, DAMON users can monitor any address
+space with any access check technique.
+
+Nonetheless, DAMON provides vma tracking and PTE Accessed bit check based
+implementations of the address space dependent functions for the virtual memory
+by default, for a reference and convenient use.  In near future, we will
+provide those for physical memory address space.
+
+
+Can I simply monitor page granularity?
+======================================
+
+Yes.  You can do so by setting the ``min_nr_regions`` attribute higher than the
+working set size divided by the page size.  Because the monitoring target
+regions size is forced to be ``>=page size``, the region split will make no
+effect.
diff --git a/Documentation/vm/damon/index.rst b/Documentation/vm/damon/index.rst
new file mode 100644
index 000000000000..a2858baf3bf1
--- /dev/null
+++ b/Documentation/vm/damon/index.rst
@@ -0,0 +1,30 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+==========================
+DAMON: Data Access MONitor
+==========================
+
+DAMON is a data access monitoring framework subsystem for the Linux kernel.
+The core mechanisms of DAMON (refer to :doc:`design` for the detail) make it
+
+ - *accurate* (the monitoring output is useful enough for DRAM level memory
+   management; It might not appropriate for CPU Cache levels, though),
+ - *light-weight* (the monitoring overhead is low enough to be applied online),
+   and
+ - *scalable* (the upper-bound of the overhead is in constant range regardless
+   of the size of target workloads).
+
+Using this framework, therefore, the kernel's memory management mechanisms can
+make advanced decisions.  Experimental memory management optimization works
+that incurring high data accesses monitoring overhead could implemented again.
+In user space, meanwhile, users who have some special workloads can write
+personalized applications for better understanding and optimizations of their
+workloads and systems.
+
+.. toctree::
+   :maxdepth: 2
+
+   faq
+   design
+   api
+   plans
diff --git a/Documentation/vm/index.rst b/Documentation/vm/index.rst
index eff5fbd492d0..b51f0d8992f8 100644
--- a/Documentation/vm/index.rst
+++ b/Documentation/vm/index.rst
@@ -32,6 +32,7 @@ descriptions of data structures and algorithms.
    arch_pgtable_helpers
    balance
    cleancache
+   damon/index
    free_page_reporting
    frontswap
    highmem
diff --git a/Documentation/x86/x86_64/mm.rst b/Documentation/x86/x86_64/mm.rst
index ede1875719fb..9798676bb0bf 100644
--- a/Documentation/x86/x86_64/mm.rst
+++ b/Documentation/x86/x86_64/mm.rst
@@ -140,10 +140,6 @@ The direct mapping covers all memory in the system up to the highest
 memory address (this means in some cases it can also include PCI memory
 holes).
 
-vmalloc space is lazily synchronized into the different PML4/PML5 pages of
-the processes using the page fault handler, with init_top_pgt as
-reference.
-
 We map EFI runtime services in the 'efi_pgd' PGD in a 64Gb large virtual
 memory window (this size is arbitrary, it can be raised later if needed).
 The mappings are not part of any other kernel PGD and are only available
diff --git a/MAINTAINERS b/MAINTAINERS
index cfec5dc5a76f..7d46f03e5037 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -333,7 +333,7 @@ S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
@@ -354,7 +354,7 @@ F:	include/linux/fwnode.h
 F:	tools/power/acpi/
 
 ACPI APEI
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Len Brown <lenb@kernel.org>
 R:	James Morse <james.morse@arm.com>
 R:	Tony Luck <tony.luck@intel.com>
@@ -364,7 +364,6 @@ F:	drivers/acpi/apei/
 
 ACPI COMPONENT ARCHITECTURE (ACPICA)
 M:	Robert Moore <robert.moore@intel.com>
-M:	Erik Kaneda <erik.kaneda@intel.com>
 M:	"Rafael J. Wysocki" <rafael.j.wysocki@intel.com>
 L:	linux-acpi@vger.kernel.org
 L:	devel@acpica.org
@@ -403,7 +402,7 @@ S:	Maintained
 F:	drivers/platform/x86/i2c-multi-instantiate.c
 
 ACPI PMIC DRIVERS
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Len Brown <lenb@kernel.org>
 R:	Andy Shevchenko <andy@kernel.org>
 R:	Mika Westerberg <mika.westerberg@linux.intel.com>
@@ -985,6 +984,12 @@ S:	Supported
 T:	git https://gitlab.freedesktop.org/agd5f/linux.git
 F:	drivers/gpu/drm/amd/pm/powerplay/
 
+AMD PTDMA DRIVER
+M:	Sanjay R Mehta <sanju.mehta@amd.com>
+L:	dmaengine@vger.kernel.org
+S:	Maintained
+F:	drivers/dma/ptdma/
+
 AMD SEATTLE DEVICE TREE SUPPORT
 M:	Brijesh Singh <brijeshkumar.singh@amd.com>
 M:	Suravee Suthikulpanit <suravee.suthikulpanit@amd.com>
@@ -2271,7 +2276,6 @@ F:	drivers/iio/adc/ab8500-gpadc.c
 F:	drivers/mfd/ab8500*
 F:	drivers/mfd/abx500*
 F:	drivers/mfd/db8500*
-F:	drivers/mfd/dbx500*
 F:	drivers/pinctrl/nomadik/
 F:	drivers/rtc/rtc-ab8500.c
 F:	drivers/rtc/rtc-pl031.c
@@ -2329,14 +2333,14 @@ N:	oxnas
 
 ARM/PALM TREO SUPPORT
 M:	Tomas Cech <sleep_walker@suse.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmtreo.*
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2,PALMTC SUPPORT
 M:	Marek Vasut <marek.vasut@gmail.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://hackndev.com
 F:	arch/arm/mach-pxa/include/mach/palmld.h
@@ -2350,7 +2354,7 @@ F:	arch/arm/mach-pxa/palmtx.c
 
 ARM/PALMZ72 SUPPORT
 M:	Sergey Lapin <slapin@ossfans.org>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 W:	http://hackndev.com
 F:	arch/arm/mach-pxa/palmz72.*
@@ -2520,7 +2524,7 @@ N:	s5pv210
 
 ARM/SAMSUNG S5P SERIES 2D GRAPHICS ACCELERATION (G2D) SUPPORT
 M:	Andrzej Hajda <a.hajda@samsung.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/platform/s5p-g2d/
@@ -2537,14 +2541,14 @@ ARM/SAMSUNG S5P SERIES JPEG CODEC SUPPORT
 M:	Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
 M:	Jacek Anaszewski <jacek.anaszewski@gmail.com>
 M:	Sylwester Nawrocki <s.nawrocki@samsung.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/platform/s5p-jpeg/
 
 ARM/SAMSUNG S5P SERIES Multi Format Codec (MFC) SUPPORT
 M:	Andrzej Hajda <a.hajda@samsung.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-media@vger.kernel.org
 S:	Maintained
 F:	drivers/media/platform/s5p-mfc/
@@ -2734,11 +2738,13 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/iwamatsu/linux-visconti.git
 F:	Documentation/devicetree/bindings/arm/toshiba.yaml
 F:	Documentation/devicetree/bindings/net/toshiba,visconti-dwmac.yaml
 F:	Documentation/devicetree/bindings/gpio/toshiba,gpio-visconti.yaml
+F:	Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.yaml
 F:	Documentation/devicetree/bindings/pinctrl/toshiba,tmpv7700-pinctrl.yaml
 F:	Documentation/devicetree/bindings/watchdog/toshiba,visconti-wdt.yaml
 F:	arch/arm64/boot/dts/toshiba/
 F:	drivers/net/ethernet/stmicro/stmmac/dwmac-visconti.c
 F:	drivers/gpio/gpio-visconti.c
+F:	drivers/pci/controller/dwc/pcie-visconti.c
 F:	drivers/pinctrl/visconti/
 F:	drivers/watchdog/visconti_wdt.c
 N:	visconti
@@ -3307,7 +3313,6 @@ S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	block/
 F:	drivers/block/
-F:	fs/block_dev.c
 F:	include/linux/blk*
 F:	kernel/trace/blktrace.c
 F:	lib/sbitmap.c
@@ -3561,7 +3566,7 @@ BROADCOM BCM5301X ARM ARCHITECTURE
 M:	Hauke Mehrtens <hauke@hauke-m.de>
 M:	Rafał Miłecki <zajec5@gmail.com>
 M:	bcm-kernel-feedback-list@broadcom.com
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/bcm470*
 F:	arch/arm/boot/dts/bcm5301*
@@ -3571,7 +3576,7 @@ F:	arch/arm/mach-bcm/bcm_5301x.c
 BROADCOM BCM53573 ARM ARCHITECTURE
 M:	Rafał Miłecki <rafal@milecki.pl>
 L:	bcm-kernel-feedback-list@broadcom.com
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm/boot/dts/bcm47189*
 F:	arch/arm/boot/dts/bcm53573*
@@ -4525,7 +4530,7 @@ F:	.clang-format
 CLANG/LLVM BUILD SUPPORT
 M:	Nathan Chancellor <nathan@kernel.org>
 M:	Nick Desaulniers <ndesaulniers@google.com>
-L:	clang-built-linux@googlegroups.com
+L:	llvm@lists.linux.dev
 S:	Supported
 W:	https://clangbuiltlinux.github.io/
 B:	https://github.com/ClangBuiltLinux/linux/issues
@@ -4541,7 +4546,7 @@ M:	Sami Tolvanen <samitolvanen@google.com>
 M:	Kees Cook <keescook@chromium.org>
 R:	Nathan Chancellor <nathan@kernel.org>
 R:	Nick Desaulniers <ndesaulniers@google.com>
-L:	clang-built-linux@googlegroups.com
+L:	llvm@lists.linux.dev
 S:	Supported
 B:	https://github.com/ClangBuiltLinux/linux/issues
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git for-next/clang/features
@@ -4820,7 +4825,7 @@ W:	http://www.arm.com/products/processors/technologies/biglittleprocessing.php
 F:	drivers/cpufreq/vexpress-spc-cpufreq.c
 
 CPU FREQUENCY SCALING FRAMEWORK
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Viresh Kumar <viresh.kumar@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -4838,7 +4843,7 @@ F:	kernel/sched/cpufreq*.c
 F:	tools/testing/selftests/cpufreq/
 
 CPU IDLE TIME MANAGEMENT FRAMEWORK
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
 S:	Maintained
@@ -4867,7 +4872,7 @@ CPUIDLE DRIVER - ARM BIG LITTLE
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 M:	Daniel Lezcano <daniel.lezcano@linaro.org>
 L:	linux-pm@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm.git
 F:	drivers/cpuidle/cpuidle-big_little.c
@@ -4887,14 +4892,14 @@ CPUIDLE DRIVER - ARM PSCI
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 M:	Sudeep Holla <sudeep.holla@arm.com>
 L:	linux-pm@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/cpuidle/cpuidle-psci.c
 
 CPUIDLE DRIVER - ARM PSCI PM DOMAIN
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-pm@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/cpuidle/cpuidle-psci.h
 F:	drivers/cpuidle/cpuidle-psci-domain.c
@@ -5148,6 +5153,17 @@ F:	net/ax25/ax25_out.c
 F:	net/ax25/ax25_timer.c
 F:	net/ax25/sysctl_net_ax25.c
 
+DATA ACCESS MONITOR
+M:	SeongJae Park <sjpark@amazon.de>
+L:	linux-mm@kvack.org
+S:	Maintained
+F:	Documentation/admin-guide/mm/damon/
+F:	Documentation/vm/damon/
+F:	include/linux/damon.h
+F:	include/trace/events/damon.h
+F:	mm/damon/
+F:	tools/testing/selftests/damon/
+
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
 L:	netdev@vger.kernel.org
 S:	Orphan
@@ -7254,7 +7270,7 @@ F:	tools/firewire/
 
 FIRMWARE FRAMEWORK FOR ARMV8-A
 M:	Sudeep Holla <sudeep.holla@arm.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/firmware/arm_ffa/
 F:	include/linux/arm_ffa.h
@@ -7433,7 +7449,7 @@ F:	include/linux/platform_data/video-imxfb.h
 
 FREESCALE IMX DDR PMU DRIVER
 M:	Frank Li <Frank.li@nxp.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/admin-guide/perf/imx-ddr.rst
 F:	Documentation/devicetree/bindings/perf/fsl-imx-ddr.yaml
@@ -7525,7 +7541,7 @@ F:	drivers/tty/serial/ucc_uart.c
 FREESCALE SOC DRIVERS
 M:	Li Yang <leoyang.li@nxp.com>
 L:	linuxppc-dev@lists.ozlabs.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/misc/fsl,dpaa2-console.yaml
 F:	Documentation/devicetree/bindings/soc/fsl/
@@ -7573,7 +7589,7 @@ W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 F:	fs/freevxfs/
 
 FREEZER
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
 S:	Supported
@@ -7826,7 +7842,7 @@ S:	Supported
 F:	drivers/i2c/muxes/i2c-demux-pinctrl.c
 
 GENERIC PM DOMAINS
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Kevin Hilman <khilman@kernel.org>
 M:	Ulf Hansson <ulf.hansson@linaro.org>
 L:	linux-pm@vger.kernel.org
@@ -8292,7 +8308,7 @@ W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 F:	drivers/video/fbdev/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
 S:	Supported
@@ -10605,10 +10621,10 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
 F:	drivers/ata/sata_promise.*
 
 LIBATA SUBSYSTEM (Serial and Parallel ATA drivers)
-M:	Jens Axboe <axboe@kernel.dk>
+M:	Damien Le Moal <damien.lemoal@opensource.wdc.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-block.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata.git
 F:	Documentation/devicetree/bindings/ata/
 F:	drivers/ata/
 F:	include/linux/ata.h
@@ -11173,7 +11189,7 @@ F:	drivers/net/wireless/marvell/libertas/
 
 MARVELL MACCHIATOBIN SUPPORT
 M:	Russell King <linux@armlinux.org.uk>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	arch/arm64/boot/dts/marvell/armada-8040-mcbin.dts
 
@@ -12621,6 +12637,7 @@ Q:	http://patchwork.linuxtv.org/project/linux-media/list/
 F:	drivers/media/dvb-frontends/mn88473*
 
 MODULE SUPPORT
+M:	Luis Chamberlain <mcgrof@kernel.org>
 M:	Jessica Yu <jeyu@kernel.org>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux.git modules-next
@@ -13391,7 +13408,7 @@ F:	include/linux/nvme-fc.h
 NVM EXPRESS TARGET DRIVER
 M:	Christoph Hellwig <hch@lst.de>
 M:	Sagi Grimberg <sagi@grimberg.me>
-M:	Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
+M:	Chaitanya Kulkarni <kch@nvidia.com>
 L:	linux-nvme@lists.infradead.org
 S:	Supported
 W:	http://git.infradead.org/nvme.git
@@ -14253,7 +14270,7 @@ F:	drivers/pci/controller/pcie-altera.c
 PCI DRIVER FOR APPLIEDMICRO XGENE
 M:	Toan Le <toan@os.amperecomputing.com>
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/xgene-pci.txt
 F:	drivers/pci/controller/pci-xgene.c
@@ -14261,7 +14278,7 @@ F:	drivers/pci/controller/pci-xgene.c
 PCI DRIVER FOR ARM VERSATILE PLATFORM
 M:	Rob Herring <robh@kernel.org>
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/versatile.yaml
 F:	drivers/pci/controller/pci-versatile.c
@@ -14269,7 +14286,7 @@ F:	drivers/pci/controller/pci-versatile.c
 PCI DRIVER FOR ARMADA 8K
 M:	Thomas Petazzoni <thomas.petazzoni@bootlin.com>
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/pci-armada8k.txt
 F:	drivers/pci/controller/dwc/pcie-armada8k.c
@@ -14287,7 +14304,7 @@ M:	Mingkai Hu <mingkai.hu@nxp.com>
 M:	Roy Zang <roy.zang@nxp.com>
 L:	linuxppc-dev@lists.ozlabs.org
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/pci/controller/dwc/*layerscape*
 
@@ -14367,7 +14384,7 @@ F:	drivers/pci/controller/pci-tegra.c
 PCI DRIVER FOR NXP LAYERSCAPE GEN4 CONTROLLER
 M:	Hou Zhiqiang <Zhiqiang.Hou@nxp.com>
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/layerscape-pcie-gen4.txt
 F:	drivers/pci/controller/mobiveil/pcie-layerscape-gen4.c
@@ -14402,7 +14419,7 @@ PCI DRIVER FOR TI DRA7XX/J721E
 M:	Kishon Vijay Abraham I <kishon@ti.com>
 L:	linux-omap@vger.kernel.org
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	Documentation/devicetree/bindings/pci/ti-pci.txt
 F:	drivers/pci/controller/cadence/pci-j721e.c
@@ -14458,7 +14475,7 @@ F:	drivers/pci/controller/pcie-altera-msi.c
 PCI MSI DRIVER FOR APPLIEDMICRO XGENE
 M:	Toan Le <toan@os.amperecomputing.com>
 L:	linux-pci@vger.kernel.org
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/pci/xgene-pci-msi.txt
 F:	drivers/pci/controller/pci-xgene-msi.c
@@ -14542,6 +14559,13 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/pci/hisilicon-histb-pcie.txt
 F:	drivers/pci/controller/dwc/pcie-histb.c
 
+PCIE DRIVER FOR INTEL KEEM BAY
+M:	Srikanth Thokala <srikanth.thokala@intel.com>
+L:	linux-pci@vger.kernel.org
+S:	Supported
+F:	Documentation/devicetree/bindings/pci/intel,keembay-pcie*
+F:	drivers/pci/controller/dwc/pcie-keembay.c
+
 PCIE DRIVER FOR INTEL LGM GW SOC
 M:	Rahul Tanwar <rtanwar@maxlinear.com>
 L:	linux-pci@vger.kernel.org
@@ -14943,7 +14967,7 @@ F:	kernel/time/*timer*
 F:	kernel/time/namespace.c
 
 POWER MANAGEMENT CORE
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 L:	linux-pm@vger.kernel.org
 S:	Supported
 B:	https://bugzilla.kernel.org
@@ -14968,7 +14992,7 @@ F:	include/linux/dtpm.h
 POWER STATE COORDINATION INTERFACE (PSCI)
 M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/firmware/psci/
 F:	include/linux/psci.h
@@ -15493,7 +15517,7 @@ F:	arch/hexagon/
 
 QUALCOMM HIDMA DRIVER
 M:	Sinan Kaya <okaya@kernel.org>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 L:	linux-arm-msm@vger.kernel.org
 L:	dmaengine@vger.kernel.org
 S:	Supported
@@ -17207,7 +17231,7 @@ SECURE MONITOR CALL(SMC) CALLING CONVENTION (SMCCC)
 M:	Mark Rutland <mark.rutland@arm.com>
 M:	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
 M:	Sudeep Holla <sudeep.holla@arm.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/firmware/smccc/
 F:	include/linux/arm-smccc.h
@@ -17324,7 +17348,7 @@ F:	drivers/media/pci/solo6x10/
 
 SOFTWARE DELEGATED EXCEPTION INTERFACE (SDEI)
 M:	James Morse <james.morse@arm.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/firmware/sdei.txt
 F:	drivers/firmware/arm_sdei.c
@@ -17921,7 +17945,7 @@ F:	arch/sh/
 F:	drivers/sh/
 
 SUSPEND TO RAM
-M:	"Rafael J. Wysocki" <rjw@rjwysocki.net>
+M:	"Rafael J. Wysocki" <rafael@kernel.org>
 M:	Len Brown <len.brown@intel.com>
 M:	Pavel Machek <pavel@ucw.cz>
 L:	linux-pm@vger.kernel.org
@@ -18111,7 +18135,7 @@ F:	drivers/mfd/syscon.c
 SYSTEM CONTROL & POWER/MANAGEMENT INTERFACE (SCPI/SCMI) Message Protocol drivers
 M:	Sudeep Holla <sudeep.holla@arm.com>
 R:	Cristian Marussi <cristian.marussi@arm.com>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/firmware/arm,sc[mp]i.yaml
 F:	drivers/clk/clk-sc[mp]i.c
@@ -18484,7 +18508,7 @@ TEXAS INSTRUMENTS' SYSTEM CONTROL INTERFACE (TISCI) PROTOCOL DRIVER
 M:	Nishanth Menon <nm@ti.com>
 M:	Tero Kristo <kristo@kernel.org>
 M:	Santosh Shilimkar <ssantosh@kernel.org>
-L:	linux-arm-kernel@lists.infradead.org
+L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/devicetree/bindings/arm/keystone/ti,k3-sci-common.yaml
 F:	Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
@@ -18541,6 +18565,7 @@ F:	drivers/thermal/
 F:	include/linux/cpu_cooling.h
 F:	include/linux/thermal.h
 F:	include/uapi/linux/thermal.h
+F:	tools/thermal/
 
 THERMAL DRIVER FOR AMLOGIC SOCS
 M:	Guillaume La Roque <glaroque@baylibre.com>
@@ -18973,6 +18998,20 @@ F:	arch/x86/mm/testmmiotrace.c
 F:	include/linux/mmiotrace.h
 F:	kernel/trace/trace_mmiotrace.c
 
+TRACING OS NOISE / LATENCY TRACERS
+M:	Steven Rostedt <rostedt@goodmis.org>
+M:	Daniel Bristot de Oliveira <bristot@kernel.org>
+S:	Maintained
+F:	kernel/trace/trace_osnoise.c
+F:	include/trace/events/osnoise.h
+F:	kernel/trace/trace_hwlat.c
+F:	kernel/trace/trace_irqsoff.c
+F:	kernel/trace/trace_sched_wakeup.c
+F:	Documentation/trace/osnoise-tracer.rst
+F:	Documentation/trace/timerlat-tracer.rst
+F:	Documentation/trace/hwlat_detector.rst
+F:	arch/*/kernel/trace.c
+
 TRADITIONAL CHINESE DOCUMENTATION
 M:	Hu Haowen <src.res@email.cn>
 L:	linux-doc-tw-discuss@lists.sourceforge.net
@@ -19153,9 +19192,8 @@ W:	http://dotat.at/prog/unifdef
 F:	scripts/unifdef.c
 
 UNIFORM CDROM DRIVER
-M:	Jens Axboe <axboe@kernel.dk>
+M:	Phillip Potter <phil@philpotter.co.uk>
 S:	Maintained
-W:	http://www.kernel.dk
 F:	Documentation/cdrom/
 F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
@@ -19749,18 +19787,11 @@ L:	kvm@vger.kernel.org
 L:	virtualization@lists.linux-foundation.org
 L:	netdev@vger.kernel.org
 S:	Maintained
-F:	drivers/net/vsockmon.c
 F:	drivers/vhost/vsock.c
 F:	include/linux/virtio_vsock.h
 F:	include/uapi/linux/virtio_vsock.h
-F:	include/uapi/linux/vm_sockets_diag.h
-F:	include/uapi/linux/vsockmon.h
-F:	net/vmw_vsock/af_vsock_tap.c
-F:	net/vmw_vsock/diag.c
 F:	net/vmw_vsock/virtio_transport.c
 F:	net/vmw_vsock/virtio_transport_common.c
-F:	net/vmw_vsock/vsock_loopback.c
-F:	tools/testing/vsock/
 
 VIRTIO BLOCK AND SCSI DRIVERS
 M:	"Michael S. Tsirkin" <mst@redhat.com>
@@ -19839,6 +19870,15 @@ F:	Documentation/filesystems/virtiofs.rst
 F:	fs/fuse/virtio_fs.c
 F:	include/uapi/linux/virtio_fs.h
 
+VIRTIO GPIO DRIVER
+M:	Enrico Weigelt, metux IT consult <info@metux.net>
+M:	Viresh Kumar <vireshk@kernel.org>
+L:	linux-gpio@vger.kernel.org
+L:	virtualization@lists.linux-foundation.org
+S:	Maintained
+F:	drivers/gpio/gpio-virtio.c
+F:	include/uapi/linux/virtio_gpio.h
+
 VIRTIO GPU DRIVER
 M:	David Airlie <airlied@linux.ie>
 M:	Gerd Hoffmann <kraxel@redhat.com>
@@ -19956,6 +19996,19 @@ F:	drivers/staging/vme/
 F:	drivers/vme/
 F:	include/linux/vme*
 
+VM SOCKETS (AF_VSOCK)
+M:	Stefano Garzarella <sgarzare@redhat.com>
+L:	virtualization@lists.linux-foundation.org
+L:	netdev@vger.kernel.org
+S:	Maintained
+F:	drivers/net/vsockmon.c
+F:	include/net/af_vsock.h
+F:	include/uapi/linux/vm_sockets.h
+F:	include/uapi/linux/vm_sockets_diag.h
+F:	include/uapi/linux/vsockmon.h
+F:	net/vmw_vsock/
+F:	tools/testing/vsock/
+
 VMWARE BALLOON DRIVER
 M:	Nadav Amit <namit@vmware.com>
 M:	"VMware, Inc." <pv-drivers@vmware.com>
@@ -20533,7 +20586,7 @@ R:	Srinivas Neeli <srinivas.neeli@xilinx.com>
 R:	Michal Simek <michal.simek@xilinx.com>
 S:	Maintained
 F:	Documentation/devicetree/bindings/gpio/gpio-xilinx.txt
-F:	Documentation/devicetree/bindings/gpio/gpio-zynq.txt
+F:	Documentation/devicetree/bindings/gpio/gpio-zynq.yaml
 F:	drivers/gpio/gpio-xilinx.c
 F:	drivers/gpio/gpio-zynq.c
 
diff --git a/Makefile b/Makefile
index d45fc2edf186..2d1e491f7737 100644
--- a/Makefile
+++ b/Makefile
@@ -802,6 +802,8 @@ else
 # Disabled for clang while comment to attribute conversion happens and
 # https://github.com/ClangBuiltLinux/linux/issues/636 is discussed.
 KBUILD_CFLAGS += $(call cc-option,-Wimplicit-fallthrough=5,)
+# gcc inanely warns about local variables called 'main'
+KBUILD_CFLAGS += -Wno-main
 endif
 
 # These warnings generated too much noise in a regular build.
diff --git a/arch/Kconfig b/arch/Kconfig
index 98db63496bab..8df1c7102643 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -197,6 +197,9 @@ config HAVE_FUNCTION_ERROR_INJECTION
 config HAVE_NMI
 	bool
 
+config TRACE_IRQFLAGS_SUPPORT
+	bool
+
 #
 # An arch should select this if it provides all these things:
 #
@@ -886,7 +889,7 @@ config HAVE_SOFTIRQ_ON_OWN_STACK
 	bool
 	help
 	  Architecture provides a function to run __do_softirq() on a
-	  seperate stack.
+	  separate stack.
 
 config PGTABLE_LEVELS
 	int
diff --git a/arch/alpha/include/asm/agp.h b/arch/alpha/include/asm/agp.h
index 7173eada1567..7874f063d000 100644
--- a/arch/alpha/include/asm/agp.h
+++ b/arch/alpha/include/asm/agp.h
@@ -6,8 +6,8 @@
 
 /* dummy for now */
 
-#define map_page_into_agp(page) 
-#define unmap_page_from_agp(page) 
+#define map_page_into_agp(page)		do { } while (0)
+#define unmap_page_from_agp(page)	do { } while (0)
 #define flush_agp_cache() mb()
 
 /* GATT allocation. Returns/accepts GATT kernel virtual address. */
diff --git a/arch/alpha/kernel/pci-sysfs.c b/arch/alpha/kernel/pci-sysfs.c
index 0021580d79ad..5808a66e2a81 100644
--- a/arch/alpha/kernel/pci-sysfs.c
+++ b/arch/alpha/kernel/pci-sysfs.c
@@ -60,6 +60,8 @@ static int __pci_mmap_fits(struct pci_dev *pdev, int num,
  * @sparse: address space type
  *
  * Use the bus mapping routines to map a PCI resource into userspace.
+ *
+ * Return: %0 on success, negative error code otherwise
  */
 static int pci_mmap_resource(struct kobject *kobj,
 			     struct bin_attribute *attr,
@@ -106,7 +108,7 @@ static int pci_mmap_resource_dense(struct file *filp, struct kobject *kobj,
 
 /**
  * pci_remove_resource_files - cleanup resource files
- * @dev: dev to cleanup
+ * @pdev: pci_dev to cleanup
  *
  * If we created resource files for @dev, remove them from sysfs and
  * free their resources.
@@ -221,10 +223,12 @@ static int pci_create_attr(struct pci_dev *pdev, int num)
 }
 
 /**
- * pci_create_resource_files - create resource files in sysfs for @dev
- * @dev: dev in question
+ * pci_create_resource_files - create resource files in sysfs for @pdev
+ * @pdev: pci_dev in question
  *
  * Walk the resources in @dev creating files for each resource available.
+ *
+ * Return: %0 on success, or negative error code
  */
 int pci_create_resource_files(struct pci_dev *pdev)
 {
@@ -296,7 +300,7 @@ int pci_mmap_legacy_page_range(struct pci_bus *bus, struct vm_area_struct *vma,
 
 /**
  * pci_adjust_legacy_attr - adjustment of legacy file attributes
- * @b: bus to create files under
+ * @bus: bus to create files under
  * @mmap_type: I/O port or memory
  *
  * Adjust file name and size for sparse mappings.
diff --git a/arch/arc/Kconfig b/arch/arc/Kconfig
index b5bf68e74732..3a5a80f302e1 100644
--- a/arch/arc/Kconfig
+++ b/arch/arc/Kconfig
@@ -49,9 +49,7 @@ config ARC
 	select PERF_USE_VMALLOC if ARC_CACHE_VIPT_ALIASING
 	select HAVE_ARCH_JUMP_LABEL if ISA_ARCV2 && !CPU_ENDIAN_BE32
 	select SET_FS
-
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
+	select TRACE_IRQFLAGS_SUPPORT
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -116,16 +114,9 @@ choice
 	default ARC_CPU_770 if ISA_ARCOMPACT
 	default ARC_CPU_HS if ISA_ARCV2
 
-if ISA_ARCOMPACT
-
-config ARC_CPU_750D
-	bool "ARC750D"
-	select ARC_CANT_LLSC
-	help
-	  Support for ARC750 core
-
 config ARC_CPU_770
 	bool "ARC770"
+	depends on ISA_ARCOMPACT
 	select ARC_HAS_SWAPE
 	help
 	  Support for ARC770 core introduced with Rel 4.10 (Summer 2011)
@@ -135,8 +126,6 @@ config ARC_CPU_770
 	  -Caches: New Prog Model, Region Flush
 	  -Insns: endian swap, load-locked/store-conditional, time-stamp-ctr
 
-endif #ISA_ARCOMPACT
-
 config ARC_CPU_HS
 	bool "ARC-HS"
 	depends on ISA_ARCV2
@@ -274,33 +263,17 @@ config ARC_DCCM_BASE
 
 choice
 	prompt "MMU Version"
-	default ARC_MMU_V3 if ARC_CPU_770
-	default ARC_MMU_V2 if ARC_CPU_750D
-	default ARC_MMU_V4 if ARC_CPU_HS
-
-if ISA_ARCOMPACT
-
-config ARC_MMU_V1
-	bool "MMU v1"
-	help
-	  Orig ARC700 MMU
-
-config ARC_MMU_V2
-	bool "MMU v2"
-	help
-	  Fixed the deficiency of v1 - possible thrashing in memcpy scenario
-	  when 2 D-TLB and 1 I-TLB entries index into same 2way set.
+	default ARC_MMU_V3 if ISA_ARCOMPACT
+	default ARC_MMU_V4 if ISA_ARCV2
 
 config ARC_MMU_V3
 	bool "MMU v3"
-	depends on ARC_CPU_770
+	depends on ISA_ARCOMPACT
 	help
 	  Introduced with ARC700 4.10: New Features
 	  Variable Page size (1k-16k), var JTLB size 128 x (2 or 4)
 	  Shared Address Spaces (SASID)
 
-endif
-
 config ARC_MMU_V4
 	bool "MMU v4"
 	depends on ISA_ARCV2
@@ -319,7 +292,6 @@ config ARC_PAGE_SIZE_8K
 
 config ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on ARC_MMU_V3 || ARC_MMU_V4
 
 config ARC_PAGE_SIZE_4K
 	bool "4KB"
@@ -340,6 +312,10 @@ config ARC_HUGEPAGE_16M
 
 endchoice
 
+config PGTABLE_LEVELS
+	int "Number of Page table levels"
+	default 2
+
 config ARC_COMPACT_IRQ_LEVELS
 	depends on ISA_ARCOMPACT
 	bool "Setup Timer IRQ as high Priority"
@@ -563,9 +539,6 @@ config ARC_DW2_UNWIND
 	  If you don't debug the kernel, you can say N, but we may not be able
 	  to solve problems without frame unwind information
 
-config ARC_DBG_TLB_PARANOIA
-	bool "Paranoia Checks in Low Level TLB Handlers"
-
 config ARC_DBG_JUMP_LABEL
 	bool "Paranoid checks in Static Keys (jump labels) code"
 	depends on JUMP_LABEL
diff --git a/arch/arc/include/asm/atomic-llsc.h b/arch/arc/include/asm/atomic-llsc.h
new file mode 100644
index 000000000000..088d348781c1
--- /dev/null
+++ b/arch/arc/include/asm/atomic-llsc.h
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_LLSC_H
+#define _ASM_ARC_ATOMIC_LLSC_H
+
+#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
+
+#define ATOMIC_OP(op, c_op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
+	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+}									\
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+static inline int arch_atomic_##op##_return_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[val], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[val], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+									\
+	return val;							\
+}
+
+#define arch_atomic_add_return_relaxed		arch_atomic_add_return_relaxed
+#define arch_atomic_sub_return_relaxed		arch_atomic_sub_return_relaxed
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int arch_atomic_fetch_##op##_relaxed(int i, atomic_t *v)	\
+{									\
+	unsigned int val, orig;						\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock   %[orig], [%[ctr]]		\n"		\
+	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
+	"	scond   %[val], [%[ctr]]		\n"		\
+	"	bnz     1b				\n"		\
+	: [val]	"=&r"	(val),						\
+	  [orig] "=&r" (orig)						\
+	: [ctr]	"r"	(&v->counter),					\
+	  [i]	"ir"	(i)						\
+	: "cc");							\
+									\
+	return orig;							\
+}
+
+#define arch_atomic_fetch_add_relaxed		arch_atomic_fetch_add_relaxed
+#define arch_atomic_fetch_sub_relaxed		arch_atomic_fetch_sub_relaxed
+
+#define arch_atomic_fetch_and_relaxed		arch_atomic_fetch_and_relaxed
+#define arch_atomic_fetch_andnot_relaxed	arch_atomic_fetch_andnot_relaxed
+#define arch_atomic_fetch_or_relaxed		arch_atomic_fetch_or_relaxed
+#define arch_atomic_fetch_xor_relaxed		arch_atomic_fetch_xor_relaxed
+
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, add)
+ATOMIC_OPS(sub, -=, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or, |=, or)
+ATOMIC_OPS(xor, ^=, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic-spinlock.h b/arch/arc/include/asm/atomic-spinlock.h
new file mode 100644
index 000000000000..2c830347bfb4
--- /dev/null
+++ b/arch/arc/include/asm/atomic-spinlock.h
@@ -0,0 +1,102 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef _ASM_ARC_ATOMIC_SPLOCK_H
+#define _ASM_ARC_ATOMIC_SPLOCK_H
+
+/*
+ * Non hardware assisted Atomic-R-M-W
+ * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ */
+
+static inline void arch_atomic_set(atomic_t *v, int i)
+{
+	/*
+	 * Independent of hardware support, all of the atomic_xxx() APIs need
+	 * to follow the same locking rules to make sure that a "hardware"
+	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
+	 * sequence
+	 *
+	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
+	 * requires the locking.
+	 */
+	unsigned long flags;
+
+	atomic_ops_lock(flags);
+	WRITE_ONCE(v->counter, i);
+	atomic_ops_unlock(flags);
+}
+
+#define arch_atomic_set_release(v, i)	arch_atomic_set((v), (i))
+
+#define ATOMIC_OP(op, c_op, asm_op)					\
+static inline void arch_atomic_##op(int i, atomic_t *v)			\
+{									\
+	unsigned long flags;						\
+									\
+	atomic_ops_lock(flags);						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+}
+
+#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int temp;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	temp = v->counter;						\
+	temp c_op i;							\
+	v->counter = temp;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return temp;							\
+}
+
+#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
+static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
+{									\
+	unsigned long flags;						\
+	unsigned int orig;						\
+									\
+	/*								\
+	 * spin lock/unlock provides the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(flags);						\
+	orig = v->counter;						\
+	v->counter c_op i;						\
+	atomic_ops_unlock(flags);					\
+									\
+	return orig;							\
+}
+
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(add, +=, add)
+ATOMIC_OPS(sub, -=, sub)
+
+#undef ATOMIC_OPS
+#define ATOMIC_OPS(op, c_op, asm_op)					\
+	ATOMIC_OP(op, c_op, asm_op)					\
+	ATOMIC_FETCH_OP(op, c_op, asm_op)
+
+ATOMIC_OPS(and, &=, and)
+ATOMIC_OPS(andnot, &= ~, bic)
+ATOMIC_OPS(or, |=, or)
+ATOMIC_OPS(xor, ^=, xor)
+
+#define arch_atomic_andnot		arch_atomic_andnot
+#define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
+
+#undef ATOMIC_OPS
+#undef ATOMIC_FETCH_OP
+#undef ATOMIC_OP_RETURN
+#undef ATOMIC_OP
+
+#endif
diff --git a/arch/arc/include/asm/atomic.h b/arch/arc/include/asm/atomic.h
index 7a36d79b5b2f..52ee51e1ff7c 100644
--- a/arch/arc/include/asm/atomic.h
+++ b/arch/arc/include/asm/atomic.h
@@ -17,435 +17,43 @@
 #define arch_atomic_read(v)  READ_ONCE((v)->counter)
 
 #ifdef CONFIG_ARC_HAS_LLSC
-
-#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void arch_atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned int val;						\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val) /* Early clobber to prevent reg reuse */	\
-	: [ctr]	"r"	(&v->counter), /* Not "m": llock only supports reg direct addr mode */	\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-}									\
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned int val;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[val], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[val], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
-{									\
-	unsigned int val, orig;						\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such semantics	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock   %[orig], [%[ctr]]		\n"		\
-	"	" #asm_op " %[val], %[orig], %[i]	\n"		\
-	"	scond   %[val], [%[ctr]]		\n"		\
-	"	bnz     1b				\n"		\
-	: [val]	"=&r"	(val),						\
-	  [orig] "=&r" (orig)						\
-	: [ctr]	"r"	(&v->counter),					\
-	  [i]	"ir"	(i)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#else	/* !CONFIG_ARC_HAS_LLSC */
-
-#ifndef CONFIG_SMP
-
- /* violating atomic_xxx API locking protocol in UP for optimization sake */
-#define arch_atomic_set(v, i) WRITE_ONCE(((v)->counter), (i))
-
+#include <asm/atomic-llsc.h>
 #else
+#include <asm/atomic-spinlock.h>
+#endif
 
-static inline void arch_atomic_set(atomic_t *v, int i)
-{
-	/*
-	 * Independent of hardware support, all of the atomic_xxx() APIs need
-	 * to follow the same locking rules to make sure that a "hardware"
-	 * atomic insn (e.g. LD) doesn't clobber an "emulated" atomic insn
-	 * sequence
-	 *
-	 * Thus atomic_set() despite being 1 insn (and seemingly atomic)
-	 * requires the locking.
-	 */
-	unsigned long flags;
+#define arch_atomic_cmpxchg(v, o, n)					\
+({									\
+	arch_cmpxchg(&((v)->counter), (o), (n));			\
+})
 
-	atomic_ops_lock(flags);
-	WRITE_ONCE(v->counter, i);
-	atomic_ops_unlock(flags);
-}
+#ifdef arch_cmpxchg_relaxed
+#define arch_atomic_cmpxchg_relaxed(v, o, n)				\
+({									\
+	arch_cmpxchg_relaxed(&((v)->counter), (o), (n));		\
+})
+#endif
 
-#define arch_atomic_set_release(v, i)	arch_atomic_set((v), (i))
+#define arch_atomic_xchg(v, n)						\
+({									\
+	arch_xchg(&((v)->counter), (n));				\
+})
 
+#ifdef arch_xchg_relaxed
+#define arch_atomic_xchg_relaxed(v, n)					\
+({									\
+	arch_xchg_relaxed(&((v)->counter), (n));			\
+})
 #endif
 
 /*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
+ * 64-bit atomics
  */
-
-#define ATOMIC_OP(op, c_op, asm_op)					\
-static inline void arch_atomic_##op(int i, atomic_t *v)			\
-{									\
-	unsigned long flags;						\
-									\
-	atomic_ops_lock(flags);						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-}
-
-#define ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-static inline int arch_atomic_##op##_return(int i, atomic_t *v)		\
-{									\
-	unsigned long flags;						\
-	unsigned long temp;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	temp = v->counter;						\
-	temp c_op i;							\
-	v->counter = temp;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return temp;							\
-}
-
-#define ATOMIC_FETCH_OP(op, c_op, asm_op)				\
-static inline int arch_atomic_fetch_##op(int i, atomic_t *v)		\
-{									\
-	unsigned long flags;						\
-	unsigned long orig;						\
-									\
-	/*								\
-	 * spin lock/unlock provides the needed smp_mb() before/after	\
-	 */								\
-	atomic_ops_lock(flags);						\
-	orig = v->counter;						\
-	v->counter c_op i;						\
-	atomic_ops_unlock(flags);					\
-									\
-	return orig;							\
-}
-
-#endif /* !CONFIG_ARC_HAS_LLSC */
-
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_OP_RETURN(op, c_op, asm_op)				\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(add, +=, add)
-ATOMIC_OPS(sub, -=, sub)
-
-#undef ATOMIC_OPS
-#define ATOMIC_OPS(op, c_op, asm_op)					\
-	ATOMIC_OP(op, c_op, asm_op)					\
-	ATOMIC_FETCH_OP(op, c_op, asm_op)
-
-ATOMIC_OPS(and, &=, and)
-ATOMIC_OPS(andnot, &= ~, bic)
-ATOMIC_OPS(or, |=, or)
-ATOMIC_OPS(xor, ^=, xor)
-
-#define arch_atomic_andnot		arch_atomic_andnot
-#define arch_atomic_fetch_andnot	arch_atomic_fetch_andnot
-
-#undef ATOMIC_OPS
-#undef ATOMIC_FETCH_OP
-#undef ATOMIC_OP_RETURN
-#undef ATOMIC_OP
-
 #ifdef CONFIG_GENERIC_ATOMIC64
-
 #include <asm-generic/atomic64.h>
-
-#else	/* Kconfig ensures this is only enabled with needed h/w assist */
-
-/*
- * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
- *  - The address HAS to be 64-bit aligned
- *  - There are 2 semantics involved here:
- *    = exclusive implies no interim update between load/store to same addr
- *    = both words are observed/updated together: this is guaranteed even
- *      for regular 64-bit load (LDD) / store (STD). Thus atomic64_set()
- *      is NOT required to use LLOCKD+SCONDD, STD suffices
- */
-
-typedef struct {
-	s64 __aligned(8) counter;
-} atomic64_t;
-
-#define ATOMIC64_INIT(a) { (a) }
-
-static inline s64 arch_atomic64_read(const atomic64_t *v)
-{
-	s64 val;
-
-	__asm__ __volatile__(
-	"	ldd   %0, [%1]	\n"
-	: "=r"(val)
-	: "r"(&v->counter));
-
-	return val;
-}
-
-static inline void arch_atomic64_set(atomic64_t *v, s64 a)
-{
-	/*
-	 * This could have been a simple assignment in "C" but would need
-	 * explicit volatile. Otherwise gcc optimizers could elide the store
-	 * which borked atomic64 self-test
-	 * In the inline asm version, memory clobber needed for exact same
-	 * reason, to tell gcc about the store.
-	 *
-	 * This however is not needed for sibling atomic64_add() etc since both
-	 * load/store are explicitly done in inline asm. As long as API is used
-	 * for each access, gcc has no way to optimize away any load/store
-	 */
-	__asm__ __volatile__(
-	"	std   %0, [%1]	\n"
-	:
-	: "r"(a), "r"(&v->counter)
-	: "memory");
-}
-
-#define ATOMIC64_OP(op, op1, op2)					\
-static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
-{									\
-	s64 val;							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd  %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(val)							\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");							\
-}									\
-
-#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
-static inline s64 arch_atomic64_##op##_return(s64 a, atomic64_t *v)	\
-{									\
-	s64 val;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%1]	\n"				\
-	"	" #op1 " %L0, %L0, %L2	\n"				\
-	"	" #op2 " %H0, %H0, %H2	\n"				\
-	"	scondd   %0, [%1]	\n"				\
-	"	bnz     1b		\n"				\
-	: [val] "=&r"(val)						\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return val;							\
-}
-
-#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
-static inline s64 arch_atomic64_fetch_##op(s64 a, atomic64_t *v)	\
-{									\
-	s64 val, orig;							\
-									\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:				\n"				\
-	"	llockd   %0, [%2]	\n"				\
-	"	" #op1 " %L1, %L0, %L3	\n"				\
-	"	" #op2 " %H1, %H0, %H3	\n"				\
-	"	scondd   %1, [%2]	\n"				\
-	"	bnz     1b		\n"				\
-	: "=&r"(orig), "=&r"(val)					\
-	: "r"(&v->counter), "ir"(a)					\
-	: "cc");	/* memory clobber comes from smp_mb() */	\
-									\
-	smp_mb();							\
-									\
-	return orig;							\
-}
-
-#define ATOMIC64_OPS(op, op1, op2)					\
-	ATOMIC64_OP(op, op1, op2)					\
-	ATOMIC64_OP_RETURN(op, op1, op2)				\
-	ATOMIC64_FETCH_OP(op, op1, op2)
-
-ATOMIC64_OPS(add, add.f, adc)
-ATOMIC64_OPS(sub, sub.f, sbc)
-ATOMIC64_OPS(and, and, and)
-ATOMIC64_OPS(andnot, bic, bic)
-ATOMIC64_OPS(or, or, or)
-ATOMIC64_OPS(xor, xor, xor)
-
-#define arch_atomic64_andnot		arch_atomic64_andnot
-#define arch_atomic64_fetch_andnot	arch_atomic64_fetch_andnot
-
-#undef ATOMIC64_OPS
-#undef ATOMIC64_FETCH_OP
-#undef ATOMIC64_OP_RETURN
-#undef ATOMIC64_OP
-
-static inline s64
-arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	brne    %L0, %L2, 2f	\n"
-	"	brne    %H0, %H2, 2f	\n"
-	"	scondd  %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "ir"(expected), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
-{
-	s64 prev;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	scondd  %2, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)
-	: "r"(ptr), "r"(new)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return prev;
-}
-
-/**
- * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
- * @v: pointer of type atomic64_t
- *
- * The function returns the old value of *v minus 1, even if
- * the atomic variable, v, was not decremented.
- */
-
-static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
-{
-	s64 val;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%1]	\n"
-	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
-	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
-	"	brlt    %H0, 0, 2f	\n"
-	"	scondd  %0, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(val)
-	: "r"(&v->counter)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return val;
-}
-#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
-
-/**
- * arch_atomic64_fetch_add_unless - add unless the number is a given value
- * @v: pointer of type atomic64_t
- * @a: the amount to add to v...
- * @u: ...unless v is equal to u.
- *
- * Atomically adds @a to @v, if it was not @u.
- * Returns the old value of @v
- */
-static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
-{
-	s64 old, temp;
-
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llockd  %0, [%2]	\n"
-	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
-	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
-	"2:				\n"
-	"	add.f   %L1, %L0, %L3	\n"
-	"	adc     %H1, %H0, %H3	\n"
-	"	scondd  %1, [%2]	\n"
-	"	bnz     1b		\n"
-	"3:				\n"
-	: "=&r"(old), "=&r" (temp)
-	: "r"(&v->counter), "r"(a), "r"(u)
-	: "cc");	/* memory clobber comes from smp_mb() */
-
-	smp_mb();
-
-	return old;
-}
-#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
-
-#endif	/* !CONFIG_GENERIC_ATOMIC64 */
+#else
+#include <asm/atomic64-arcv2.h>
+#endif
 
 #endif	/* !__ASSEMBLY__ */
 
diff --git a/arch/arc/include/asm/atomic64-arcv2.h b/arch/arc/include/asm/atomic64-arcv2.h
new file mode 100644
index 000000000000..c5a8010fdc97
--- /dev/null
+++ b/arch/arc/include/asm/atomic64-arcv2.h
@@ -0,0 +1,250 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+/*
+ * ARCv2 supports 64-bit exclusive load (LLOCKD) / store (SCONDD)
+ *  - The address HAS to be 64-bit aligned
+ */
+
+#ifndef _ASM_ARC_ATOMIC64_ARCV2_H
+#define _ASM_ARC_ATOMIC64_ARCV2_H
+
+typedef struct {
+	s64 __aligned(8) counter;
+} atomic64_t;
+
+#define ATOMIC64_INIT(a) { (a) }
+
+static inline s64 arch_atomic64_read(const atomic64_t *v)
+{
+	s64 val;
+
+	__asm__ __volatile__(
+	"	ldd   %0, [%1]	\n"
+	: "=r"(val)
+	: "r"(&v->counter));
+
+	return val;
+}
+
+static inline void arch_atomic64_set(atomic64_t *v, s64 a)
+{
+	/*
+	 * This could have been a simple assignment in "C" but would need
+	 * explicit volatile. Otherwise gcc optimizers could elide the store
+	 * which borked atomic64 self-test
+	 * In the inline asm version, memory clobber needed for exact same
+	 * reason, to tell gcc about the store.
+	 *
+	 * This however is not needed for sibling atomic64_add() etc since both
+	 * load/store are explicitly done in inline asm. As long as API is used
+	 * for each access, gcc has no way to optimize away any load/store
+	 */
+	__asm__ __volatile__(
+	"	std   %0, [%1]	\n"
+	:
+	: "r"(a), "r"(&v->counter)
+	: "memory");
+}
+
+#define ATOMIC64_OP(op, op1, op2)					\
+static inline void arch_atomic64_##op(s64 a, atomic64_t *v)		\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd  %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(val)							\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");							\
+}									\
+
+#define ATOMIC64_OP_RETURN(op, op1, op2)		        	\
+static inline s64 arch_atomic64_##op##_return_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%1]	\n"				\
+	"	" #op1 " %L0, %L0, %L2	\n"				\
+	"	" #op2 " %H0, %H0, %H2	\n"				\
+	"	scondd   %0, [%1]	\n"				\
+	"	bnz     1b		\n"				\
+	: [val] "=&r"(val)						\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	return val;							\
+}
+
+#define arch_atomic64_add_return_relaxed	arch_atomic64_add_return_relaxed
+#define arch_atomic64_sub_return_relaxed	arch_atomic64_sub_return_relaxed
+
+#define ATOMIC64_FETCH_OP(op, op1, op2)		        		\
+static inline s64 arch_atomic64_fetch_##op##_relaxed(s64 a, atomic64_t *v)	\
+{									\
+	s64 val, orig;							\
+									\
+	__asm__ __volatile__(						\
+	"1:				\n"				\
+	"	llockd   %0, [%2]	\n"				\
+	"	" #op1 " %L1, %L0, %L3	\n"				\
+	"	" #op2 " %H1, %H0, %H3	\n"				\
+	"	scondd   %1, [%2]	\n"				\
+	"	bnz     1b		\n"				\
+	: "=&r"(orig), "=&r"(val)					\
+	: "r"(&v->counter), "ir"(a)					\
+	: "cc");	/* memory clobber comes from smp_mb() */	\
+									\
+	return orig;							\
+}
+
+#define arch_atomic64_fetch_add_relaxed		arch_atomic64_fetch_add_relaxed
+#define arch_atomic64_fetch_sub_relaxed		arch_atomic64_fetch_sub_relaxed
+
+#define arch_atomic64_fetch_and_relaxed		arch_atomic64_fetch_and_relaxed
+#define arch_atomic64_fetch_andnot_relaxed	arch_atomic64_fetch_andnot_relaxed
+#define arch_atomic64_fetch_or_relaxed		arch_atomic64_fetch_or_relaxed
+#define arch_atomic64_fetch_xor_relaxed		arch_atomic64_fetch_xor_relaxed
+
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_OP_RETURN(op, op1, op2)				\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(add, add.f, adc)
+ATOMIC64_OPS(sub, sub.f, sbc)
+
+#undef ATOMIC64_OPS
+#define ATOMIC64_OPS(op, op1, op2)					\
+	ATOMIC64_OP(op, op1, op2)					\
+	ATOMIC64_FETCH_OP(op, op1, op2)
+
+ATOMIC64_OPS(and, and, and)
+ATOMIC64_OPS(andnot, bic, bic)
+ATOMIC64_OPS(or, or, or)
+ATOMIC64_OPS(xor, xor, xor)
+
+#define arch_atomic64_andnot		arch_atomic64_andnot
+
+#undef ATOMIC64_OPS
+#undef ATOMIC64_FETCH_OP
+#undef ATOMIC64_OP_RETURN
+#undef ATOMIC64_OP
+
+static inline s64
+arch_atomic64_cmpxchg(atomic64_t *ptr, s64 expected, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	brne    %L0, %L2, 2f	\n"
+	"	brne    %H0, %H2, 2f	\n"
+	"	scondd  %3, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "ir"(expected), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+static inline s64 arch_atomic64_xchg(atomic64_t *ptr, s64 new)
+{
+	s64 prev;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	scondd  %2, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(prev)
+	: "r"(ptr), "r"(new)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return prev;
+}
+
+/**
+ * arch_atomic64_dec_if_positive - decrement by 1 if old value positive
+ * @v: pointer of type atomic64_t
+ *
+ * The function returns the old value of *v minus 1, even if
+ * the atomic variable, v, was not decremented.
+ */
+
+static inline s64 arch_atomic64_dec_if_positive(atomic64_t *v)
+{
+	s64 val;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%1]	\n"
+	"	sub.f   %L0, %L0, 1	# w0 - 1, set C on borrow\n"
+	"	sub.c   %H0, %H0, 1	# if C set, w1 - 1\n"
+	"	brlt    %H0, 0, 2f	\n"
+	"	scondd  %0, [%1]	\n"
+	"	bnz     1b		\n"
+	"2:				\n"
+	: "=&r"(val)
+	: "r"(&v->counter)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return val;
+}
+#define arch_atomic64_dec_if_positive arch_atomic64_dec_if_positive
+
+/**
+ * arch_atomic64_fetch_add_unless - add unless the number is a given value
+ * @v: pointer of type atomic64_t
+ * @a: the amount to add to v...
+ * @u: ...unless v is equal to u.
+ *
+ * Atomically adds @a to @v, if it was not @u.
+ * Returns the old value of @v
+ */
+static inline s64 arch_atomic64_fetch_add_unless(atomic64_t *v, s64 a, s64 u)
+{
+	s64 old, temp;
+
+	smp_mb();
+
+	__asm__ __volatile__(
+	"1:	llockd  %0, [%2]	\n"
+	"	brne	%L0, %L4, 2f	# continue to add since v != u \n"
+	"	breq.d	%H0, %H4, 3f	# return since v == u \n"
+	"2:				\n"
+	"	add.f   %L1, %L0, %L3	\n"
+	"	adc     %H1, %H0, %H3	\n"
+	"	scondd  %1, [%2]	\n"
+	"	bnz     1b		\n"
+	"3:				\n"
+	: "=&r"(old), "=&r" (temp)
+	: "r"(&v->counter), "r"(a), "r"(u)
+	: "cc");	/* memory clobber comes from smp_mb() */
+
+	smp_mb();
+
+	return old;
+}
+#define arch_atomic64_fetch_add_unless arch_atomic64_fetch_add_unless
+
+#endif
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index fb98440c0bd4..a7daaf64ae34 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -14,188 +14,6 @@
 
 #include <linux/types.h>
 #include <linux/compiler.h>
-#include <asm/barrier.h>
-#ifndef CONFIG_ARC_HAS_LLSC
-#include <asm/smp.h>
-#endif
-
-#ifdef CONFIG_ARC_HAS_LLSC
-
-/*
- * Hardware assisted Atomic-R-M-W
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned int temp;						\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%1]		\n"			\
-	"	" #asm_op " %0, %0, %2	\n"				\
-	"	scond       %0, [%1]		\n"			\
-	"	bnz         1b			\n"			\
-	: "=&r"(temp)	/* Early clobber, to prevent reg reuse */	\
-	: "r"(m),	/* Not "m": llock only supports reg direct addr mode */	\
-	  "ir"(nr)							\
-	: "cc");							\
-}
-
-/*
- * Semantically:
- *    Test the bit
- *    if clear
- *        set it and return 0 (old value)
- *    else
- *        return 1 (old value).
- *
- * Since ARC lacks a equivalent h/w primitive, the bit is set unconditionally
- * and the old value of bit is returned
- */
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, temp;					\
-									\
-	m += nr >> 5;							\
-									\
-	nr &= 0x1f;							\
-									\
-	/*								\
-	 * Explicit full memory barrier needed before/after as		\
-	 * LLOCK/SCOND themselves don't provide any such smenatic	\
-	 */								\
-	smp_mb();							\
-									\
-	__asm__ __volatile__(						\
-	"1:	llock       %0, [%2]	\n"				\
-	"	" #asm_op " %1, %0, %3	\n"				\
-	"	scond       %1, [%2]	\n"				\
-	"	bnz         1b		\n"				\
-	: "=&r"(old), "=&r"(temp)					\
-	: "r"(m), "ir"(nr)						\
-	: "cc");							\
-									\
-	smp_mb();							\
-									\
-	return (old & (1 << nr)) != 0;					\
-}
-
-#else /* !CONFIG_ARC_HAS_LLSC */
-
-/*
- * Non hardware assisted Atomic-R-M-W
- * Locking would change to irq-disabling only (UP) and spinlocks (SMP)
- *
- * There's "significant" micro-optimization in writing our own variants of
- * bitops (over generic variants)
- *
- * (1) The generic APIs have "signed" @nr while we have it "unsigned"
- *     This avoids extra code to be generated for pointer arithmatic, since
- *     is "not sure" that index is NOT -ve
- * (2) Utilize the fact that ARCompact bit fidding insn (BSET/BCLR/ASL) etc
- *     only consider bottom 5 bits of @nr, so NO need to mask them off.
- *     (GCC Quirk: however for constant @nr we still need to do the masking
- *             at compile time)
- */
-
-#define BIT_OP(op, c_op, asm_op)					\
-static inline void op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long temp, flags;					\
-	m += nr >> 5;							\
-									\
-	/*								\
-	 * spin lock/unlock provide the needed smp_mb() before/after	\
-	 */								\
-	bitops_lock(flags);						\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));					\
-									\
-	bitops_unlock(flags);						\
-}
-
-#define TEST_N_BIT_OP(op, c_op, asm_op)					\
-static inline int test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old, flags;					\
-	m += nr >> 5;							\
-									\
-	bitops_lock(flags);						\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	bitops_unlock(flags);						\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#endif
-
-/***************************************
- * Non atomic variants
- **************************************/
-
-#define __BIT_OP(op, c_op, asm_op)					\
-static inline void __##op##_bit(unsigned long nr, volatile unsigned long *m)	\
-{									\
-	unsigned long temp;						\
-	m += nr >> 5;							\
-									\
-	temp = *m;							\
-	*m = temp c_op (1UL << (nr & 0x1f));				\
-}
-
-#define __TEST_N_BIT_OP(op, c_op, asm_op)				\
-static inline int __test_and_##op##_bit(unsigned long nr, volatile unsigned long *m)\
-{									\
-	unsigned long old;						\
-	m += nr >> 5;							\
-									\
-	old = *m;							\
-	*m = old c_op (1UL << (nr & 0x1f));				\
-									\
-	return (old & (1UL << (nr & 0x1f))) != 0;			\
-}
-
-#define BIT_OPS(op, c_op, asm_op)					\
-									\
-	/* set_bit(), clear_bit(), change_bit() */			\
-	BIT_OP(op, c_op, asm_op)					\
-									\
-	/* test_and_set_bit(), test_and_clear_bit(), test_and_change_bit() */\
-	TEST_N_BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __set_bit(), __clear_bit(), __change_bit() */		\
-	__BIT_OP(op, c_op, asm_op)					\
-									\
-	/* __test_and_set_bit(), __test_and_clear_bit(), __test_and_change_bit() */\
-	__TEST_N_BIT_OP(op, c_op, asm_op)
-
-BIT_OPS(set, |, bset)
-BIT_OPS(clear, & ~, bclr)
-BIT_OPS(change, ^, bxor)
-
-/*
- * This routine doesn't need to be atomic.
- */
-static inline int
-test_bit(unsigned int nr, const volatile unsigned long *addr)
-{
-	unsigned long mask;
-
-	addr += nr >> 5;
-
-	mask = 1UL << (nr & 0x1f);
-
-	return ((mask & *addr) != 0);
-}
 
 #ifdef CONFIG_ISA_ARCOMPACT
 
@@ -296,7 +114,7 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long word)
  * @result: [1-32]
  * fls(1) = 1, fls(0x80000000) = 32, fls(0) = 0
  */
-static inline __attribute__ ((const)) int fls(unsigned long x)
+static inline __attribute__ ((const)) int fls(unsigned int x)
 {
 	int n;
 
@@ -323,7 +141,7 @@ static inline __attribute__ ((const)) int __fls(unsigned long x)
  * ffs = Find First Set in word (LSB to MSB)
  * @result: [1-32], 0 if all 0's
  */
-static inline __attribute__ ((const)) int ffs(unsigned long x)
+static inline __attribute__ ((const)) int ffs(unsigned int x)
 {
 	int n;
 
@@ -368,6 +186,8 @@ static inline __attribute__ ((const)) unsigned long __ffs(unsigned long x)
 #include <asm-generic/bitops/fls64.h>
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/lock.h>
+#include <asm-generic/bitops/atomic.h>
+#include <asm-generic/bitops/non-atomic.h>
 
 #include <asm-generic/bitops/find.h>
 #include <asm-generic/bitops/le.h>
diff --git a/arch/arc/include/asm/cache.h b/arch/arc/include/asm/cache.h
index d8ece4292388..f0f1fc5d62b6 100644
--- a/arch/arc/include/asm/cache.h
+++ b/arch/arc/include/asm/cache.h
@@ -62,10 +62,6 @@
 #define ARCH_SLAB_MINALIGN	8
 #endif
 
-extern void arc_cache_init(void);
-extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
-extern void read_decode_cache_bcr(void);
-
 extern int ioc_enable;
 extern unsigned long perip_base, perip_end;
 
diff --git a/arch/arc/include/asm/cmpxchg.h b/arch/arc/include/asm/cmpxchg.h
index d42917e803e1..c5b544a5fe81 100644
--- a/arch/arc/include/asm/cmpxchg.h
+++ b/arch/arc/include/asm/cmpxchg.h
@@ -6,6 +6,7 @@
 #ifndef __ASM_ARC_CMPXCHG_H
 #define __ASM_ARC_CMPXCHG_H
 
+#include <linux/build_bug.h>
 #include <linux/types.h>
 
 #include <asm/barrier.h>
@@ -13,146 +14,130 @@
 
 #ifdef CONFIG_ARC_HAS_LLSC
 
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long prev;
-
-	/*
-	 * Explicit full memory barrier needed before/after as
-	 * LLOCK/SCOND themselves don't provide any such semantics
-	 */
-	smp_mb();
-
-	__asm__ __volatile__(
-	"1:	llock   %0, [%1]	\n"
-	"	brne    %0, %2, 2f	\n"
-	"	scond   %3, [%1]	\n"
-	"	bnz     1b		\n"
-	"2:				\n"
-	: "=&r"(prev)	/* Early clobber, to prevent reg reuse */
-	: "r"(ptr),	/* Not "m": llock only supports reg direct addr mode */
-	  "ir"(expected),
-	  "r"(new)	/* can't be "ir". scond can't take LIMM for "b" */
-	: "cc", "memory"); /* so that gcc knows memory is being written here */
-
-	smp_mb();
-
-	return prev;
-}
-
-#else /* !CONFIG_ARC_HAS_LLSC */
-
-static inline unsigned long
-__cmpxchg(volatile void *ptr, unsigned long expected, unsigned long new)
-{
-	unsigned long flags;
-	int prev;
-	volatile unsigned long *p = ptr;
-
-	/*
-	 * spin lock/unlock provide the needed smp_mb() before/after
-	 */
-	atomic_ops_lock(flags);
-	prev = *p;
-	if (prev == expected)
-		*p = new;
-	atomic_ops_unlock(flags);
-	return prev;
-}
-
-#endif
+/*
+ * if (*ptr == @old)
+ *      *ptr = @new
+ */
+#define __cmpxchg(ptr, old, new)					\
+({									\
+	__typeof__(*(ptr)) _prev;					\
+									\
+	__asm__ __volatile__(						\
+	"1:	llock  %0, [%1]	\n"					\
+	"	brne   %0, %2, 2f	\n"				\
+	"	scond  %3, [%1]	\n"					\
+	"	bnz     1b		\n"				\
+	"2:				\n"				\
+	: "=&r"(_prev)	/* Early clobber prevent reg reuse */		\
+	: "r"(ptr),	/* Not "m": llock only supports reg */		\
+	  "ir"(old),							\
+	  "r"(new)	/* Not "ir": scond can't take LIMM */		\
+	: "cc",								\
+	  "memory");	/* gcc knows memory is clobbered */		\
+									\
+	_prev;								\
+})
 
-#define arch_cmpxchg(ptr, o, n) ({			\
-	(typeof(*(ptr)))__cmpxchg((ptr),		\
-				  (unsigned long)(o),	\
-				  (unsigned long)(n));	\
+#define arch_cmpxchg_relaxed(ptr, old, new)				\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+									\
+	switch(sizeof((_p_))) {						\
+	case 4:								\
+		_prev_ = __cmpxchg(_p_, _o_, _n_);			\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_prev_;								\
 })
 
-/*
- * atomic_cmpxchg is same as cmpxchg
- *   LLSC: only different in data-type, semantics are exactly same
- *  !LLSC: cmpxchg() has to use an external lock atomic_ops_lock to guarantee
- *         semantics, and this lock also happens to be used by atomic_*()
- */
-#define arch_atomic_cmpxchg(v, o, n) ((int)arch_cmpxchg(&((v)->counter), (o), (n)))
+#else
 
+#define arch_cmpxchg(ptr, old, new)				        \
+({									\
+	volatile __typeof__(ptr) _p_ = (ptr);				\
+	__typeof__(*(ptr)) _o_ = (old);					\
+	__typeof__(*(ptr)) _n_ = (new);					\
+	__typeof__(*(ptr)) _prev_;					\
+	unsigned long __flags;						\
+									\
+	BUILD_BUG_ON(sizeof(_p_) != 4);					\
+									\
+	/*								\
+	 * spin lock/unlock provide the needed smp_mb() before/after	\
+	 */								\
+	atomic_ops_lock(__flags);					\
+	_prev_ = *_p_;							\
+	if (_prev_ == _o_)						\
+		*_p_ = _n_;						\
+	atomic_ops_unlock(__flags);					\
+	_prev_;								\
+})
+
+#endif
 
 /*
- * xchg (reg with memory) based on "Native atomic" EX insn
+ * xchg
  */
-static inline unsigned long __xchg(unsigned long val, volatile void *ptr,
-				   int size)
-{
-	extern unsigned long __xchg_bad_pointer(void);
-
-	switch (size) {
-	case 4:
-		smp_mb();
-
-		__asm__ __volatile__(
-		"	ex  %0, [%1]	\n"
-		: "+r"(val)
-		: "r"(ptr)
-		: "memory");
+#ifdef CONFIG_ARC_HAS_LLSC
 
-		smp_mb();
+#define __xchg(ptr, val)						\
+({									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"	/* set new value */	        \
+	: "+r"(val)							\
+	: "r"(ptr)							\
+	: "memory");							\
+	_val_;		/* get old value */				\
+})
 
-		return val;
-	}
-	return __xchg_bad_pointer();
-}
+#define arch_xchg_relaxed(ptr, val)					\
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	switch(sizeof(*(_p_))) {					\
+	case 4:								\
+		_val_ = __xchg(_p_, _val_);				\
+		break;							\
+	default:							\
+		BUILD_BUG();						\
+	}								\
+	_val_;								\
+})
 
-#define _xchg(ptr, with) ((typeof(*(ptr)))__xchg((unsigned long)(with), (ptr), \
-						 sizeof(*(ptr))))
+#else  /* !CONFIG_ARC_HAS_LLSC */
 
 /*
- * xchg() maps directly to ARC EX instruction which guarantees atomicity.
- * However in !LLSC config, it also needs to be use @atomic_ops_lock spinlock
- * due to a subtle reason:
- *  - For !LLSC, cmpxchg() needs to use that lock (see above) and there is lot
- *    of  kernel code which calls xchg()/cmpxchg() on same data (see llist.h)
- *    Hence xchg() needs to follow same locking rules.
- *
- * Technically the lock is also needed for UP (boils down to irq save/restore)
- * but we can cheat a bit since cmpxchg() atomic_ops_lock() would cause irqs to
- * be disabled thus can't possibly be interrupted/preempted/clobbered by xchg()
- * Other way around, xchg is one instruction anyways, so can't be interrupted
- * as such
+ * EX instructions is baseline and present in !LLSC too. But in this
+ * regime it still needs use @atomic_ops_lock spinlock to allow interop
+ * with cmpxchg() which uses spinlock in !LLSC
+ * (llist.h use xchg and cmpxchg on sama data)
  */
 
-#if !defined(CONFIG_ARC_HAS_LLSC) && defined(CONFIG_SMP)
-
-#define arch_xchg(ptr, with)		\
-({					\
-	unsigned long flags;		\
-	typeof(*(ptr)) old_val;		\
-					\
-	atomic_ops_lock(flags);		\
-	old_val = _xchg(ptr, with);	\
-	atomic_ops_unlock(flags);	\
-	old_val;			\
+#define arch_xchg(ptr, val)					        \
+({									\
+	__typeof__(ptr) _p_ = (ptr);					\
+	__typeof__(*(ptr)) _val_ = (val);				\
+									\
+	unsigned long __flags;						\
+									\
+	atomic_ops_lock(__flags);					\
+									\
+	__asm__ __volatile__(						\
+	"	ex  %0, [%1]	\n"					\
+	: "+r"(_val_)							\
+	: "r"(_p_)							\
+	: "memory");							\
+									\
+	atomic_ops_unlock(__flags);					\
+	_val_;								\
 })
 
-#else
-
-#define arch_xchg(ptr, with)  _xchg(ptr, with)
-
 #endif
 
-/*
- * "atomic" variant of xchg()
- * REQ: It needs to follow the same serialization rules as other atomic_xxx()
- * Since xchg() doesn't always do that, it would seem that following definition
- * is incorrect. But here's the rationale:
- *   SMP : Even xchg() takes the atomic_ops_lock, so OK.
- *   LLSC: atomic_ops_lock are not relevant at all (even if SMP, since LLSC
- *         is natively "SMP safe", no serialization required).
- *   UP  : other atomics disable IRQ, so no way a difft ctxt atomic_xchg()
- *         could clobber them. atomic_xchg() itself would be 1 insn, so it
- *         can't be clobbered by others. Thus no serialization required when
- *         atomic_xchg is involved.
- */
-#define arch_atomic_xchg(v, new) (arch_xchg(&((v)->counter), new))
-
 #endif
diff --git a/arch/arc/include/asm/entry-compact.h b/arch/arc/include/asm/entry-compact.h
index 6dbf5cecc8cc..5aab4f93ab8a 100644
--- a/arch/arc/include/asm/entry-compact.h
+++ b/arch/arc/include/asm/entry-compact.h
@@ -126,19 +126,11 @@
  * to be saved again on kernel mode stack, as part of pt_regs.
  *-------------------------------------------------------------*/
 .macro PROLOG_FREEUP_REG	reg, mem
-#ifndef ARC_USE_SCRATCH_REG
-	sr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	st  \reg, [\mem]
-#endif
 .endm
 
 .macro PROLOG_RESTORE_REG	reg, mem
-#ifndef ARC_USE_SCRATCH_REG
-	lr  \reg, [ARC_REG_SCRATCH_DATA0]
-#else
 	ld  \reg, [\mem]
-#endif
 .endm
 
 /*--------------------------------------------------------------
diff --git a/arch/arc/include/asm/hugepage.h b/arch/arc/include/asm/hugepage.h
index 4eef17c5c1da..11b0ff26b97b 100644
--- a/arch/arc/include/asm/hugepage.h
+++ b/arch/arc/include/asm/hugepage.h
@@ -58,14 +58,6 @@ static inline void set_pmd_at(struct mm_struct *mm, unsigned long addr,
 extern void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 				 pmd_t *pmd);
 
-/* Generic variants assume pgtable_t is struct page *, hence need for these */
-#define __HAVE_ARCH_PGTABLE_DEPOSIT
-extern void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				       pgtable_t pgtable);
-
-#define __HAVE_ARCH_PGTABLE_WITHDRAW
-extern pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp);
-
 #define __HAVE_ARCH_FLUSH_PMD_TLB_RANGE
 extern void flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 				unsigned long end);
diff --git a/arch/arc/include/asm/mmu-arcv2.h b/arch/arc/include/asm/mmu-arcv2.h
new file mode 100644
index 000000000000..ed9036d4ede3
--- /dev/null
+++ b/arch/arc/include/asm/mmu-arcv2.h
@@ -0,0 +1,103 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012, 2019-20 Synopsys, Inc. (www.synopsys.com)
+ *
+ * MMUv3 (arc700) / MMUv4 (archs) are software page walked and software managed.
+ * This file contains the TLB access registers and commands
+ */
+
+#ifndef _ASM_ARC_MMU_ARCV2_H
+#define _ASM_ARC_MMU_ARCV2_H
+
+/*
+ * TLB Management regs
+ */
+#define ARC_REG_MMU_BCR		0x06f
+
+#ifdef CONFIG_ARC_MMU_V3
+#define ARC_REG_TLBPD0		0x405
+#define ARC_REG_TLBPD1		0x406
+#define ARC_REG_TLBPD1HI	0	/* Dummy: allows common code */
+#define ARC_REG_TLBINDEX	0x407
+#define ARC_REG_TLBCOMMAND	0x408
+#define ARC_REG_PID		0x409
+#define ARC_REG_SCRATCH_DATA0	0x418
+#else
+#define ARC_REG_TLBPD0		0x460
+#define ARC_REG_TLBPD1		0x461
+#define ARC_REG_TLBPD1HI	0x463
+#define ARC_REG_TLBINDEX	0x464
+#define ARC_REG_TLBCOMMAND	0x465
+#define ARC_REG_PID		0x468
+#define ARC_REG_SCRATCH_DATA0	0x46c
+#endif
+
+/* Bits in MMU PID reg */
+#define __TLB_ENABLE		(1 << 31)
+#define __PROG_ENABLE		(1 << 30)
+#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
+
+/* Bits in TLB Index reg */
+#define TLB_LKUP_ERR		0x80000000
+
+#ifdef CONFIG_ARC_MMU_V3
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x00000001)
+#else
+#define TLB_DUP_ERR		(TLB_LKUP_ERR | 0x40000000)
+#endif
+
+/*
+ * TLB Commands
+ */
+#define TLBWrite    		0x1
+#define TLBRead     		0x2
+#define TLBGetIndex 		0x3
+#define TLBProbe    		0x4
+#define TLBWriteNI		0x5  /* write JTLB without inv uTLBs */
+#define TLBIVUTLB		0x6  /* explicitly inv uTLBs */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define TLBInsertEntry		0x7
+#define TLBDeleteEntry		0x8
+#endif
+
+/* Masks for actual TLB "PD"s */
+#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
+#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
+
+#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
+
+#ifndef __ASSEMBLY__
+
+struct mm_struct;
+extern int pae40_exist_but_not_enab(void);
+
+static inline int is_pae40_enabled(void)
+{
+	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
+}
+
+static inline void mmu_setup_asid(struct mm_struct *mm, unsigned long asid)
+{
+	write_aux_reg(ARC_REG_PID, asid | MMU_ENABLE);
+}
+
+static inline void mmu_setup_pgd(struct mm_struct *mm, void *pgd)
+{
+	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
+#ifdef CONFIG_ISA_ARCV2
+	write_aux_reg(ARC_REG_SCRATCH_DATA0, (unsigned int)pgd);
+#endif
+}
+
+#else
+
+.macro ARC_MMU_REENABLE reg
+	lr \reg, [ARC_REG_PID]
+	or \reg, \reg, MMU_ENABLE
+	sr \reg, [ARC_REG_PID]
+.endm
+
+#endif /* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/mmu.h b/arch/arc/include/asm/mmu.h
index 26b731d32a2b..ca427c30f70e 100644
--- a/arch/arc/include/asm/mmu.h
+++ b/arch/arc/include/asm/mmu.h
@@ -7,98 +7,15 @@
 #define _ASM_ARC_MMU_H
 
 #ifndef __ASSEMBLY__
-#include <linux/threads.h>	/* NR_CPUS */
-#endif
-
-#if defined(CONFIG_ARC_MMU_V1)
-#define CONFIG_ARC_MMU_VER 1
-#elif defined(CONFIG_ARC_MMU_V2)
-#define CONFIG_ARC_MMU_VER 2
-#elif defined(CONFIG_ARC_MMU_V3)
-#define CONFIG_ARC_MMU_VER 3
-#elif defined(CONFIG_ARC_MMU_V4)
-#define CONFIG_ARC_MMU_VER 4
-#endif
-
-/* MMU Management regs */
-#define ARC_REG_MMU_BCR		0x06f
-#if (CONFIG_ARC_MMU_VER < 4)
-#define ARC_REG_TLBPD0		0x405
-#define ARC_REG_TLBPD1		0x406
-#define ARC_REG_TLBPD1HI	0	/* Dummy: allows code sharing with ARC700 */
-#define ARC_REG_TLBINDEX	0x407
-#define ARC_REG_TLBCOMMAND	0x408
-#define ARC_REG_PID		0x409
-#define ARC_REG_SCRATCH_DATA0	0x418
-#else
-#define ARC_REG_TLBPD0		0x460
-#define ARC_REG_TLBPD1		0x461
-#define ARC_REG_TLBPD1HI	0x463
-#define ARC_REG_TLBINDEX	0x464
-#define ARC_REG_TLBCOMMAND	0x465
-#define ARC_REG_PID		0x468
-#define ARC_REG_SCRATCH_DATA0	0x46c
-#endif
-
-#if defined(CONFIG_ISA_ARCV2) || !defined(CONFIG_SMP)
-#define	ARC_USE_SCRATCH_REG
-#endif
-
-/* Bits in MMU PID register */
-#define __TLB_ENABLE		(1 << 31)
-#define __PROG_ENABLE		(1 << 30)
-#define MMU_ENABLE		(__TLB_ENABLE | __PROG_ENABLE)
-
-/* Error code if probe fails */
-#define TLB_LKUP_ERR		0x80000000
-
-#if (CONFIG_ARC_MMU_VER < 4)
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x00000001)
-#else
-#define TLB_DUP_ERR	(TLB_LKUP_ERR | 0x40000000)
-#endif
-
-/* TLB Commands */
-#define TLBWrite    0x1
-#define TLBRead     0x2
-#define TLBGetIndex 0x3
-#define TLBProbe    0x4
-
-#if (CONFIG_ARC_MMU_VER >= 2)
-#define TLBWriteNI  0x5		/* write JTLB without inv uTLBs */
-#define TLBIVUTLB   0x6		/* explicitly inv uTLBs */
-#else
-#define TLBWriteNI  TLBWrite	/* Not present in hardware, fallback */
-#endif
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define TLBInsertEntry	0x7
-#define TLBDeleteEntry	0x8
-#endif
 
-#ifndef __ASSEMBLY__
+#include <linux/threads.h>	/* NR_CPUS */
 
 typedef struct {
 	unsigned long asid[NR_CPUS];	/* 8 bit MMU PID + Generation cycle */
 } mm_context_t;
 
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long address);
-#else
-#define tlb_paranoid_check(a, b)
 #endif
 
-void arc_mmu_init(void);
-extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
-void read_decode_mmu_bcr(void);
-
-static inline int is_pae40_enabled(void)
-{
-	return IS_ENABLED(CONFIG_ARC_HAS_PAE40);
-}
-
-extern int pae40_exist_but_not_enab(void);
-
-#endif	/* !__ASSEMBLY__ */
+#include <asm/mmu-arcv2.h>
 
 #endif
diff --git a/arch/arc/include/asm/mmu_context.h b/arch/arc/include/asm/mmu_context.h
index df164066e172..dda471f5f05b 100644
--- a/arch/arc/include/asm/mmu_context.h
+++ b/arch/arc/include/asm/mmu_context.h
@@ -15,22 +15,23 @@
 #ifndef _ASM_ARC_MMU_CONTEXT_H
 #define _ASM_ARC_MMU_CONTEXT_H
 
-#include <asm/arcregs.h>
-#include <asm/tlb.h>
 #include <linux/sched/mm.h>
 
+#include <asm/tlb.h>
 #include <asm-generic/mm_hooks.h>
 
-/*		ARC700 ASID Management
+/*		ARC ASID Management
+ *
+ * MMU tags TLBs with an 8-bit ASID, avoiding need to flush the TLB on
+ * context-switch.
  *
- * ARC MMU provides 8-bit ASID (0..255) to TAG TLB entries, allowing entries
- * with same vaddr (different tasks) to co-exit. This provides for
- * "Fast Context Switch" i.e. no TLB flush on ctxt-switch
+ * ASID is managed per cpu, so task threads across CPUs can have different
+ * ASID. Global ASID management is needed if hardware supports TLB shootdown
+ * and/or shared TLB across cores, which ARC doesn't.
  *
- * Linux assigns each task a unique ASID. A simple round-robin allocation
- * of H/w ASID is done using software tracker @asid_cpu.
- * When it reaches max 255, the allocation cycle starts afresh by flushing
- * the entire TLB and wrapping ASID back to zero.
+ * Each task is assigned unique ASID, with a simple round-robin allocator
+ * tracked in @asid_cpu. When 8-bit value rolls over,a new cycle is started
+ * over from 0, and TLB is flushed
  *
  * A new allocation cycle, post rollover, could potentially reassign an ASID
  * to a different task. Thus the rule is to refresh the ASID in a new cycle.
@@ -93,7 +94,7 @@ static inline void get_new_mmu_context(struct mm_struct *mm)
 	asid_mm(mm, cpu) = asid_cpu(cpu);
 
 set_hw:
-	write_aux_reg(ARC_REG_PID, hw_pid(mm, cpu) | MMU_ENABLE);
+	mmu_setup_asid(mm, hw_pid(mm, cpu));
 
 	local_irq_restore(flags);
 }
@@ -146,10 +147,7 @@ static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	 */
 	cpumask_set_cpu(cpu, mm_cpumask(next));
 
-#ifdef ARC_USE_SCRATCH_REG
-	/* PGD cached in MMU reg to avoid 3 mem lookups: task->mm->pgd */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, next->pgd);
-#endif
+	mmu_setup_pgd(next, next->pgd);
 
 	get_new_mmu_context(next);
 }
diff --git a/arch/arc/include/asm/page.h b/arch/arc/include/asm/page.h
index 4a9d33372fe2..9a62e1d87967 100644
--- a/arch/arc/include/asm/page.h
+++ b/arch/arc/include/asm/page.h
@@ -34,57 +34,55 @@ void copy_user_highpage(struct page *to, struct page *from,
 			unsigned long u_vaddr, struct vm_area_struct *vma);
 void clear_user_page(void *to, unsigned long u_vaddr, struct page *page);
 
-#undef STRICT_MM_TYPECHECKS
-
-#ifdef STRICT_MM_TYPECHECKS
-/*
- * These are used to make use of C type-checking..
- */
-typedef struct {
-#ifdef CONFIG_ARC_HAS_PAE40
-	unsigned long long pte;
-#else
-	unsigned long pte;
-#endif
-} pte_t;
 typedef struct {
 	unsigned long pgd;
 } pgd_t;
+
+#define pgd_val(x)	((x).pgd)
+#define __pgd(x)	((pgd_t) { (x) })
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
 typedef struct {
-	unsigned long pgprot;
-} pgprot_t;
+	unsigned long pud;
+} pud_t;
 
-#define pte_val(x)      ((x).pte)
-#define pgd_val(x)      ((x).pgd)
-#define pgprot_val(x)   ((x).pgprot)
+#define pud_val(x)      	((x).pud)
+#define __pud(x)        	((pud_t) { (x) })
 
-#define __pte(x)        ((pte_t) { (x) })
-#define __pgd(x)        ((pgd_t) { (x) })
-#define __pgprot(x)     ((pgprot_t) { (x) })
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
 
-#define pte_pgprot(x) __pgprot(pte_val(x))
+typedef struct {
+	unsigned long pmd;
+} pmd_t;
 
-#else /* !STRICT_MM_TYPECHECKS */
+#define pmd_val(x)	((x).pmd)
+#define __pmd(x)	((pmd_t) { (x) })
 
+#endif
+
+typedef struct {
 #ifdef CONFIG_ARC_HAS_PAE40
-typedef unsigned long long pte_t;
+	unsigned long long pte;
 #else
-typedef unsigned long pte_t;
+	unsigned long pte;
 #endif
-typedef unsigned long pgd_t;
-typedef unsigned long pgprot_t;
+} pte_t;
 
-#define pte_val(x)	(x)
-#define pgd_val(x)	(x)
-#define pgprot_val(x)	(x)
-#define __pte(x)	(x)
-#define __pgd(x)	(x)
-#define __pgprot(x)	(x)
-#define pte_pgprot(x)	(x)
+#define pte_val(x)	((x).pte)
+#define __pte(x)	((pte_t) { (x) })
 
-#endif
+typedef struct {
+	unsigned long pgprot;
+} pgprot_t;
+
+#define pgprot_val(x)	((x).pgprot)
+#define __pgprot(x)	((pgprot_t) { (x) })
+#define pte_pgprot(x)	__pgprot(pte_val(x))
 
-typedef pte_t * pgtable_t;
+typedef struct page *pgtable_t;
 
 /*
  * Use virt_to_pfn with caution:
@@ -122,8 +120,8 @@ extern int pfn_valid(unsigned long pfn);
  * virt here means link-address/program-address as embedded in object code.
  * And for ARC, link-addr = physical address
  */
-#define __pa(vaddr)  ((unsigned long)(vaddr))
-#define __va(paddr)  ((void *)((unsigned long)(paddr)))
+#define __pa(vaddr)  		((unsigned long)(vaddr))
+#define __va(paddr)  		((void *)((unsigned long)(paddr)))
 
 #define virt_to_page(kaddr)	pfn_to_page(virt_to_pfn(kaddr))
 #define virt_addr_valid(kaddr)  pfn_valid(virt_to_pfn(kaddr))
diff --git a/arch/arc/include/asm/pgalloc.h b/arch/arc/include/asm/pgalloc.h
index a32ca3104ced..096b8ef58edb 100644
--- a/arch/arc/include/asm/pgalloc.h
+++ b/arch/arc/include/asm/pgalloc.h
@@ -31,30 +31,32 @@
 
 #include <linux/mm.h>
 #include <linux/log2.h>
+#include <asm-generic/pgalloc.h>
 
 static inline void
 pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd, pte_t *pte)
 {
-	pmd_set(pmd, pte);
+	/*
+	 * The cast to long below is OK in 32-bit PAE40 regime with long long pte
+	 * Despite "wider" pte, the pte table needs to be in non-PAE low memory
+	 * as all higher levels can only hold long pointers.
+	 *
+	 * The cast itself is needed given simplistic definition of set_pmd()
+	 */
+	set_pmd(pmd, __pmd((unsigned long)pte));
 }
 
-static inline void
-pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t ptep)
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t pte_page)
 {
-	pmd_set(pmd, (pte_t *) ptep);
-}
-
-static inline int __get_order_pgd(void)
-{
-	return get_order(PTRS_PER_PGD * sizeof(pgd_t));
+	set_pmd(pmd, __pmd((unsigned long)page_address(pte_page)));
 }
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	int num, num2;
-	pgd_t *ret = (pgd_t *) __get_free_pages(GFP_KERNEL, __get_order_pgd());
+	pgd_t *ret = (pgd_t *) __get_free_page(GFP_KERNEL);
 
 	if (ret) {
+		int num, num2;
 		num = USER_PTRS_PER_PGD + USER_KERNEL_GUTTER / PGDIR_SIZE;
 		memzero(ret, num * sizeof(pgd_t));
 
@@ -68,64 +70,27 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	return ret;
 }
 
-static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
-{
-	free_pages((unsigned long)pgd, __get_order_pgd());
-}
-
-
-/*
- * With software-only page-tables, addr-split for traversal is tweakable and
- * that directly governs how big tables would be at each level.
- * Further, the MMU page size is configurable.
- * Thus we need to programatically assert the size constraint
- * All of this is const math, allowing gcc to do constant folding/propagation.
- */
+#if CONFIG_PGTABLE_LEVELS > 3
 
-static inline int __get_order_pte(void)
+static inline void p4d_populate(struct mm_struct *mm, p4d_t *p4dp, pud_t *pudp)
 {
-	return get_order(PTRS_PER_PTE * sizeof(pte_t));
+	set_p4d(p4dp, __p4d((unsigned long)pudp));
 }
 
-static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm)
-{
-	pte_t *pte;
+#define __pud_free_tlb(tlb, pmd, addr)  pud_free((tlb)->mm, pmd)
 
-	pte = (pte_t *) __get_free_pages(GFP_KERNEL | __GFP_ZERO,
-					 __get_order_pte());
+#endif
 
-	return pte;
-}
+#if CONFIG_PGTABLE_LEVELS > 2
 
-static inline pgtable_t
-pte_alloc_one(struct mm_struct *mm)
+static inline void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmdp)
 {
-	pgtable_t pte_pg;
-	struct page *page;
-
-	pte_pg = (pgtable_t)__get_free_pages(GFP_KERNEL, __get_order_pte());
-	if (!pte_pg)
-		return 0;
-	memzero((void *)pte_pg, PTRS_PER_PTE * sizeof(pte_t));
-	page = virt_to_page(pte_pg);
-	if (!pgtable_pte_page_ctor(page)) {
-		__free_page(page);
-		return 0;
-	}
-
-	return pte_pg;
+	set_pud(pudp, __pud((unsigned long)pmdp));
 }
 
-static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
-{
-	free_pages((unsigned long)pte, __get_order_pte()); /* takes phy addr */
-}
+#define __pmd_free_tlb(tlb, pmd, addr)  pmd_free((tlb)->mm, pmd)
 
-static inline void pte_free(struct mm_struct *mm, pgtable_t ptep)
-{
-	pgtable_pte_page_dtor(virt_to_page(ptep));
-	free_pages((unsigned long)ptep, __get_order_pte());
-}
+#endif
 
 #define __pte_free_tlb(tlb, pte, addr)  pte_free((tlb)->mm, pte)
 
diff --git a/arch/arc/include/asm/pgtable-bits-arcv2.h b/arch/arc/include/asm/pgtable-bits-arcv2.h
new file mode 100644
index 000000000000..183d23bc1e00
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-bits-arcv2.h
@@ -0,0 +1,149 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * page table flags for software walked/managed MMUv3 (ARC700) and MMUv4 (HS)
+ * There correspond to the corresponding bits in the TLB
+ */
+
+#ifndef _ASM_ARC_PGTABLE_BITS_ARCV2_H
+#define _ASM_ARC_PGTABLE_BITS_ARCV2_H
+
+#ifdef CONFIG_ARC_CACHE_PAGES
+#define _PAGE_CACHEABLE		(1 << 0)  /* Cached (H) */
+#else
+#define _PAGE_CACHEABLE		0
+#endif
+
+#define _PAGE_EXECUTE		(1 << 1)  /* User Execute  (H) */
+#define _PAGE_WRITE		(1 << 2)  /* User Write    (H) */
+#define _PAGE_READ		(1 << 3)  /* User Read     (H) */
+#define _PAGE_ACCESSED		(1 << 4)  /* Accessed      (s) */
+#define _PAGE_DIRTY		(1 << 5)  /* Modified      (s) */
+#define _PAGE_SPECIAL		(1 << 6)
+#define _PAGE_GLOBAL		(1 << 8)  /* ASID agnostic (H) */
+#define _PAGE_PRESENT		(1 << 9)  /* PTE/TLB Valid (H) */
+
+#ifdef CONFIG_ARC_MMU_V4
+#define _PAGE_HW_SZ		(1 << 10)  /* Normal/super (H) */
+#else
+#define _PAGE_HW_SZ		0
+#endif
+
+/* Defaults for every user page */
+#define ___DEF		(_PAGE_PRESENT | _PAGE_CACHEABLE)
+
+/* Set of bits not changed in pte_modify */
+#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
+							   _PAGE_SPECIAL)
+
+/* More Abbrevaited helpers */
+#define PAGE_U_NONE     __pgprot(___DEF)
+#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
+#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
+#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
+#define PAGE_U_X_W_R    __pgprot(___DEF \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+#define PAGE_KERNEL     __pgprot(___DEF | _PAGE_GLOBAL \
+				| _PAGE_READ | _PAGE_WRITE | _PAGE_EXECUTE)
+
+#define PAGE_SHARED	PAGE_U_W_R
+
+#define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
+
+/*
+ * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
+ *
+ * Certain cases have 1:1 mapping
+ *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
+ *       which directly corresponds to  PAGE_U_X_R
+ *
+ * Other rules which cause the divergence from 1:1 mapping
+ *
+ *  1. Although ARC700 can do exclusive execute/write protection (meaning R
+ *     can be tracked independet of X/W unlike some other CPUs), still to
+ *     keep things consistent with other archs:
+ *      -Write implies Read:   W => R
+ *      -Execute implies Read: X => R
+ *
+ *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
+ *     This is to enable COW mechanism
+ */
+	/* xwr */
+#define __P000  PAGE_U_NONE
+#define __P001  PAGE_U_R
+#define __P010  PAGE_U_R	/* Pvt-W => !W */
+#define __P011  PAGE_U_R	/* Pvt-W => !W */
+#define __P100  PAGE_U_X_R	/* X => R */
+#define __P101  PAGE_U_X_R
+#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
+#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
+
+#define __S000  PAGE_U_NONE
+#define __S001  PAGE_U_R
+#define __S010  PAGE_U_W_R	/* W => R */
+#define __S011  PAGE_U_W_R
+#define __S100  PAGE_U_X_R	/* X => R */
+#define __S101  PAGE_U_X_R
+#define __S110  PAGE_U_X_W_R	/* X => R */
+#define __S111  PAGE_U_X_W_R
+
+#ifndef __ASSEMBLY__
+
+#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
+#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
+#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
+#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
+
+#define PTE_BIT_FUNC(fn, op) \
+	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
+
+PTE_BIT_FUNC(mknotpresent,     &= ~(_PAGE_PRESENT));
+PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
+PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
+PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
+PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
+PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
+PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
+PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+			      pte_t *ptep, pte_t pteval)
+{
+	set_pte(ptep, pteval);
+}
+
+void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
+		      pte_t *ptep);
+
+/* Encode swap {type,off} tuple into PTE
+ * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
+ * PAGE_PRESENT is zero in a PTE holding swap "identifier"
+ */
+#define __swp_entry(type, off)		((swp_entry_t) \
+					{ ((type) & 0x1f) | ((off) << 13) })
+
+/* Decode a PTE containing swap "identifier "into constituents */
+#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
+#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
+
+#define __pte_to_swp_entry(pte)		((swp_entry_t) { pte_val(pte) })
+#define __swp_entry_to_pte(x)		((pte_t) { (x).val })
+
+#define kern_addr_valid(addr)	(1)
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+#include <asm/hugepage.h>
+#endif
+
+#endif /* __ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable-levels.h b/arch/arc/include/asm/pgtable-levels.h
new file mode 100644
index 000000000000..8084ef2f6491
--- /dev/null
+++ b/arch/arc/include/asm/pgtable-levels.h
@@ -0,0 +1,189 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2020 Synopsys, Inc. (www.synopsys.com)
+ */
+
+/*
+ * Helpers for implemenintg paging levels
+ */
+
+#ifndef _ASM_ARC_PGTABLE_LEVELS_H
+#define _ASM_ARC_PGTABLE_LEVELS_H
+
+#if CONFIG_PGTABLE_LEVELS == 2
+
+/*
+ * 2 level paging setup for software walked MMUv3 (ARC700) and MMUv4 (HS)
+ *
+ * [31]            32 bit virtual address              [0]
+ * -------------------------------------------------------
+ * |               | <---------- PGDIR_SHIFT ----------> |
+ * |               |                | <-- PAGE_SHIFT --> |
+ * -------------------------------------------------------
+ *       |                  |                |
+ *       |                  |                --> off in page frame
+ *       |                  ---> index into Page Table
+ *       ----> index into Page Directory
+ *
+ * Given software walk, the vaddr split is arbitrary set to 11:8:13
+ * However enabling of super page in a 2 level regime pegs PGDIR_SHIFT to
+ * super page size.
+ */
+
+#if defined(CONFIG_ARC_HUGEPAGE_16M)
+#define PGDIR_SHIFT		24
+#elif defined(CONFIG_ARC_HUGEPAGE_2M)
+#define PGDIR_SHIFT		21
+#else
+/*
+ * No Super page case
+ * Default value provides 11:8:13 (8K), 10:10:12 (4K)
+ * Limits imposed by pgtable_t only PAGE_SIZE long
+ * (so 4K page can only have 1K entries: or 10 bits)
+ */
+#ifdef CONFIG_ARC_PAGE_SIZE_4K
+#define PGDIR_SHIFT		22
+#else
+#define PGDIR_SHIFT		21
+#endif
+
+#endif
+
+#else /* CONFIG_PGTABLE_LEVELS != 2 */
+
+/*
+ * A default 3 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <7> : <8> : <13>
+ * A default 4 level paging testing setup in software walked MMU
+ *   MMUv4 (8K page): <4> : <3> : <4> : <8> : <13>
+ */
+#define PGDIR_SHIFT		28
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SHIFT		25
+#endif
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SHIFT		21
+#endif
+
+#endif /* CONFIG_PGTABLE_LEVELS */
+
+#define PGDIR_SIZE		BIT(PGDIR_SHIFT)
+#define PGDIR_MASK		(~(PGDIR_SIZE - 1))
+#define PTRS_PER_PGD		BIT(32 - PGDIR_SHIFT)
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#define PUD_SIZE		BIT(PUD_SHIFT)
+#define PUD_MASK		(~(PUD_SIZE - 1))
+#define PTRS_PER_PUD		BIT(PGDIR_SHIFT - PUD_SHIFT)
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+#define PMD_SIZE		BIT(PMD_SHIFT)
+#define PMD_MASK		(~(PMD_SIZE - 1))
+#define PTRS_PER_PMD		BIT(PUD_SHIFT - PMD_SHIFT)
+#endif
+
+#define PTRS_PER_PTE		BIT(PMD_SHIFT - PAGE_SHIFT)
+
+#ifndef __ASSEMBLY__
+
+#if CONFIG_PGTABLE_LEVELS > 3
+#include <asm-generic/pgtable-nop4d.h>
+#elif CONFIG_PGTABLE_LEVELS > 2
+#include <asm-generic/pgtable-nopud.h>
+#else
+#include <asm-generic/pgtable-nopmd.h>
+#endif
+
+/*
+ * 1st level paging: pgd
+ */
+#define pgd_index(addr)		((addr) >> PGDIR_SHIFT)
+#define pgd_offset(mm, addr)	(((mm)->pgd) + pgd_index(addr))
+#define pgd_offset_k(addr)	pgd_offset(&init_mm, addr)
+#define pgd_ERROR(e) \
+	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+
+#if CONFIG_PGTABLE_LEVELS > 3
+
+/* In 4 level paging, p4d_* macros work on pgd */
+#define p4d_none(x)		(!p4d_val(x))
+#define p4d_bad(x)		((p4d_val(x) & ~PAGE_MASK))
+#define p4d_present(x)		(p4d_val(x))
+#define p4d_clear(xp)		do { p4d_val(*(xp)) = 0; } while (0)
+#define p4d_pgtable(p4d)	((pud_t *)(p4d_val(p4d) & PAGE_MASK))
+#define p4d_page(p4d)		virt_to_page(p4d_pgtable(p4d))
+#define set_p4d(p4dp, p4d)	(*(p4dp) = p4d)
+
+/*
+ * 2nd level paging: pud
+ */
+#define pud_ERROR(e) \
+	pr_crit("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
+
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+
+/*
+ * In 3 level paging, pud_* macros work on pgd
+ * In 4 level paging, pud_* macros work on pud
+ */
+#define pud_none(x)		(!pud_val(x))
+#define pud_bad(x)		((pud_val(x) & ~PAGE_MASK))
+#define pud_present(x)		(pud_val(x))
+#define pud_clear(xp)		do { pud_val(*(xp)) = 0; } while (0)
+#define pud_pgtable(pud)	((pmd_t *)(pud_val(pud) & PAGE_MASK))
+#define pud_page(pud)		virt_to_page(pud_pgtable(pud))
+#define set_pud(pudp, pud)	(*(pudp) = pud)
+
+/*
+ * 3rd level paging: pmd
+ */
+#define pmd_ERROR(e) \
+	pr_crit("%s:%d: bad pmd %08lx.\n", __FILE__, __LINE__, pmd_val(e))
+
+#define pmd_pfn(pmd)		((pmd_val(pmd) & PMD_MASK) >> PAGE_SHIFT)
+#define pfn_pmd(pfn,prot)	__pmd(((pfn) << PAGE_SHIFT) | pgprot_val(prot))
+#define mk_pmd(page,prot)	pfn_pmd(page_to_pfn(page),prot)
+
+#endif
+
+/*
+ * Due to the strange way generic pgtable level folding works, the pmd_* macros
+ *  - are valid even for 2 levels (which supposedly only has pgd - pte)
+ *  - behave differently for 2 vs. 3
+ * In 2  level paging        (pgd -> pte), pmd_* macros work on pgd
+ * In 3+ level paging (pgd -> pmd -> pte), pmd_* macros work on pmd
+ */
+#define pmd_none(x)		(!pmd_val(x))
+#define pmd_bad(x)		((pmd_val(x) & ~PAGE_MASK))
+#define pmd_present(x)		(pmd_val(x))
+#define pmd_clear(xp)		do { pmd_val(*(xp)) = 0; } while (0)
+#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
+#define pmd_page(pmd)		virt_to_page(pmd_page_vaddr(pmd))
+#define set_pmd(pmdp, pmd)	(*(pmdp) = pmd)
+#define pmd_pgtable(pmd)	((pgtable_t) pmd_page_vaddr(pmd))
+
+/*
+ * 4th level paging: pte
+ */
+#define pte_ERROR(e) \
+	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
+
+#define pte_none(x)		(!pte_val(x))
+#define pte_present(x)		(pte_val(x) & _PAGE_PRESENT)
+#define pte_clear(mm,addr,ptep)	set_pte_at(mm, addr, ptep, __pte(0))
+#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
+#define set_pte(ptep, pte)	((*(ptep)) = (pte))
+#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
+#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
+#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
+
+#ifdef CONFIG_ISA_ARCV2
+#define pmd_leaf(x)		(pmd_val(x) & _PAGE_HW_SZ)
+#endif
+
+#endif	/* !__ASSEMBLY__ */
+
+#endif
diff --git a/arch/arc/include/asm/pgtable.h b/arch/arc/include/asm/pgtable.h
index 320cc0ae8a08..9320b04c04bf 100644
--- a/arch/arc/include/asm/pgtable.h
+++ b/arch/arc/include/asm/pgtable.h
@@ -1,220 +1,17 @@
 /* SPDX-License-Identifier: GPL-2.0-only */
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * vineetg: May 2011
- *  -Folded PAGE_PRESENT (used by VM) and PAGE_VALID (used by MMU) into 1.
- *     They are semantically the same although in different contexts
- *     VALID marks a TLB entry exists and it will only happen if PRESENT
- *  - Utilise some unused free bits to confine PTE flags to 12 bits
- *     This is a must for 4k pg-sz
- *
- * vineetg: Mar 2011 - changes to accommodate MMU TLB Page Descriptor mods
- *  -TLB Locking never really existed, except for initial specs
- *  -SILENT_xxx not needed for our port
- *  -Per my request, MMU V3 changes the layout of some of the bits
- *     to avoid a few shifts in TLB Miss handlers.
- *
- * vineetg: April 2010
- *  -PGD entry no longer contains any flags. If empty it is 0, otherwise has
- *   Pg-Tbl ptr. Thus pmd_present(), pmd_valid(), pmd_set( ) become simpler
- *
- * vineetg: April 2010
- *  -Switched form 8:11:13 split for page table lookup to 11:8:13
- *  -this speeds up page table allocation itself as we now have to memset 1K
- *    instead of 8k per page table.
- * -TODO: Right now page table alloc is 8K and rest 7K is unused
- *    need to optimise it
- *
- * Amit Bhor, Sameer Dhavale: Codito Technologies 2004
  */
 
 #ifndef _ASM_ARC_PGTABLE_H
 #define _ASM_ARC_PGTABLE_H
 
 #include <linux/bits.h>
-#include <asm-generic/pgtable-nopmd.h>
-#include <asm/page.h>
-#include <asm/mmu.h>	/* to propagate CONFIG_ARC_MMU_VER <n> */
-
-/**************************************************************************
- * Page Table Flags
- *
- * ARC700 MMU only deals with softare managed TLB entries.
- * Page Tables are purely for Linux VM's consumption and the bits below are
- * suited to that (uniqueness). Hence some are not implemented in the TLB and
- * some have different value in TLB.
- * e.g. MMU v2: K_READ bit is 8 and so is GLOBAL (possible because they live in
- *      seperate PD0 and PD1, which combined forms a translation entry)
- *      while for PTE perspective, they are 8 and 9 respectively
- * with MMU v3: Most bits (except SHARED) represent the exact hardware pos
- *      (saves some bit shift ops in TLB Miss hdlrs)
- */
-
-#if (CONFIG_ARC_MMU_VER <= 2)
-
-#define _PAGE_ACCESSED      (1<<1)	/* Page is accessed (S) */
-#define _PAGE_CACHEABLE     (1<<2)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<3)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<4)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<5)	/* Page has user read perm (H) */
-#define _PAGE_DIRTY         (1<<6)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<7)
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<10)	/* TLB entry is valid (H) */
-
-#else	/* MMU v3 onwards */
-
-#define _PAGE_CACHEABLE     (1<<0)	/* Page is cached (H) */
-#define _PAGE_EXECUTE       (1<<1)	/* Page has user execute perm (H) */
-#define _PAGE_WRITE         (1<<2)	/* Page has user write perm (H) */
-#define _PAGE_READ          (1<<3)	/* Page has user read perm (H) */
-#define _PAGE_ACCESSED      (1<<4)	/* Page is accessed (S) */
-#define _PAGE_DIRTY         (1<<5)	/* Page modified (dirty) (S) */
-#define _PAGE_SPECIAL       (1<<6)
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_WTHRU         (1<<7)	/* Page cache mode write-thru (H) */
-#endif
-
-#define _PAGE_GLOBAL        (1<<8)	/* Page is global (H) */
-#define _PAGE_PRESENT       (1<<9)	/* TLB entry is valid (H) */
-
-#if (CONFIG_ARC_MMU_VER >= 4)
-#define _PAGE_HW_SZ         (1<<10)	/* Page Size indicator (H): 0 normal, 1 super */
-#endif
-
-#define _PAGE_SHARED_CODE   (1<<11)	/* Shared Code page with cmn vaddr
-					   usable for shared TLB entries (H) */
-
-#define _PAGE_UNUSED_BIT    (1<<12)
-#endif
-
-/* vmalloc permissions */
-#define _K_PAGE_PERMS  (_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ | \
-			_PAGE_GLOBAL | _PAGE_PRESENT)
-
-#ifndef CONFIG_ARC_CACHE_PAGES
-#undef _PAGE_CACHEABLE
-#define _PAGE_CACHEABLE 0
-#endif
 
-#ifndef _PAGE_HW_SZ
-#define _PAGE_HW_SZ	0
-#endif
-
-/* Defaults for every user page */
-#define ___DEF (_PAGE_PRESENT | _PAGE_CACHEABLE)
-
-/* Set of bits not changed in pte_modify */
-#define _PAGE_CHG_MASK	(PAGE_MASK_PHYS | _PAGE_ACCESSED | _PAGE_DIRTY | \
-							   _PAGE_SPECIAL)
-/* More Abbrevaited helpers */
-#define PAGE_U_NONE     __pgprot(___DEF)
-#define PAGE_U_R        __pgprot(___DEF | _PAGE_READ)
-#define PAGE_U_W_R      __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE)
-#define PAGE_U_X_R      __pgprot(___DEF | _PAGE_READ | _PAGE_EXECUTE)
-#define PAGE_U_X_W_R    __pgprot(___DEF | _PAGE_READ | _PAGE_WRITE | \
-						       _PAGE_EXECUTE)
-
-#define PAGE_SHARED	PAGE_U_W_R
-
-/* While kernel runs out of unstranslated space, vmalloc/modules use a chunk of
- * user vaddr space - visible in all addr spaces, but kernel mode only
- * Thus Global, all-kernel-access, no-user-access, cached
- */
-#define PAGE_KERNEL          __pgprot(_K_PAGE_PERMS | _PAGE_CACHEABLE)
-
-/* ioremap */
-#define PAGE_KERNEL_NO_CACHE __pgprot(_K_PAGE_PERMS)
-
-/* Masks for actual TLB "PD"s */
-#define PTE_BITS_IN_PD0		(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_HW_SZ)
-#define PTE_BITS_RWX		(_PAGE_EXECUTE | _PAGE_WRITE | _PAGE_READ)
-
-#define PTE_BITS_NON_RWX_IN_PD1	(PAGE_MASK_PHYS | _PAGE_CACHEABLE)
-
-/**************************************************************************
- * Mapping of vm_flags (Generic VM) to PTE flags (arch specific)
- *
- * Certain cases have 1:1 mapping
- *  e.g. __P101 means VM_READ, VM_EXEC and !VM_SHARED
- *       which directly corresponds to  PAGE_U_X_R
- *
- * Other rules which cause the divergence from 1:1 mapping
- *
- *  1. Although ARC700 can do exclusive execute/write protection (meaning R
- *     can be tracked independet of X/W unlike some other CPUs), still to
- *     keep things consistent with other archs:
- *      -Write implies Read:   W => R
- *      -Execute implies Read: X => R
- *
- *  2. Pvt Writable doesn't have Write Enabled initially: Pvt-W => !W
- *     This is to enable COW mechanism
- */
-	/* xwr */
-#define __P000  PAGE_U_NONE
-#define __P001  PAGE_U_R
-#define __P010  PAGE_U_R	/* Pvt-W => !W */
-#define __P011  PAGE_U_R	/* Pvt-W => !W */
-#define __P100  PAGE_U_X_R	/* X => R */
-#define __P101  PAGE_U_X_R
-#define __P110  PAGE_U_X_R	/* Pvt-W => !W and X => R */
-#define __P111  PAGE_U_X_R	/* Pvt-W => !W */
-
-#define __S000  PAGE_U_NONE
-#define __S001  PAGE_U_R
-#define __S010  PAGE_U_W_R	/* W => R */
-#define __S011  PAGE_U_W_R
-#define __S100  PAGE_U_X_R	/* X => R */
-#define __S101  PAGE_U_X_R
-#define __S110  PAGE_U_X_W_R	/* X => R */
-#define __S111  PAGE_U_X_W_R
-
-/****************************************************************
- * 2 tier (PGD:PTE) software page walker
- *
- * [31]		    32 bit virtual address              [0]
- * -------------------------------------------------------
- * |               | <------------ PGDIR_SHIFT ----------> |
- * |		   |					 |
- * | BITS_FOR_PGD  |  BITS_FOR_PTE  | <-- PAGE_SHIFT --> |
- * -------------------------------------------------------
- *       |                  |                |
- *       |                  |                --> off in page frame
- *       |                  ---> index into Page Table
- *       ----> index into Page Directory
- *
- * In a single page size configuration, only PAGE_SHIFT is fixed
- * So both PGD and PTE sizing can be tweaked
- *  e.g. 8K page (PAGE_SHIFT 13) can have
- *  - PGDIR_SHIFT 21  -> 11:8:13 address split
- *  - PGDIR_SHIFT 24  -> 8:11:13 address split
- *
- * If Super Page is configured, PGDIR_SHIFT becomes fixed too,
- * so the sizing flexibility is gone.
- */
-
-#if defined(CONFIG_ARC_HUGEPAGE_16M)
-#define PGDIR_SHIFT	24
-#elif defined(CONFIG_ARC_HUGEPAGE_2M)
-#define PGDIR_SHIFT	21
-#else
-/*
- * Only Normal page support so "hackable" (see comment above)
- * Default value provides 11:8:13 (8K), 11:9:12 (4K)
- */
-#define PGDIR_SHIFT	21
-#endif
-
-#define BITS_FOR_PTE	(PGDIR_SHIFT - PAGE_SHIFT)
-#define BITS_FOR_PGD	(32 - PGDIR_SHIFT)
-
-#define PGDIR_SIZE	BIT(PGDIR_SHIFT)	/* vaddr span, not PDG sz */
-#define PGDIR_MASK	(~(PGDIR_SIZE-1))
-
-#define	PTRS_PER_PTE	BIT(BITS_FOR_PTE)
-#define	PTRS_PER_PGD	BIT(BITS_FOR_PGD)
+#include <asm/pgtable-levels.h>
+#include <asm/pgtable-bits-arcv2.h>
+#include <asm/page.h>
+#include <asm/mmu.h>
 
 /*
  * Number of entries a user land program use.
@@ -222,143 +19,17 @@
  */
 #define	USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-
-/****************************************************************
- * Bucket load of VM Helpers
- */
-
 #ifndef __ASSEMBLY__
 
-#define pte_ERROR(e) \
-	pr_crit("%s:%d: bad pte %08lx.\n", __FILE__, __LINE__, pte_val(e))
-#define pgd_ERROR(e) \
-	pr_crit("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
-
-/* the zero page used for uninitialized and anonymous pages */
 extern char empty_zero_page[PAGE_SIZE];
 #define ZERO_PAGE(vaddr)	(virt_to_page(empty_zero_page))
 
-#define set_pte(pteptr, pteval)	((*(pteptr)) = (pteval))
-#define set_pmd(pmdptr, pmdval)	(*(pmdptr) = pmdval)
-
-/* find the page descriptor of the Page Tbl ref by PMD entry */
-#define pmd_page(pmd)		virt_to_page(pmd_val(pmd) & PAGE_MASK)
-
-/* find the logical addr (phy for ARC) of the Page Tbl ref by PMD entry */
-#define pmd_page_vaddr(pmd)	(pmd_val(pmd) & PAGE_MASK)
-
-/* In a 2 level sys, setup the PGD entry with PTE value */
-static inline void pmd_set(pmd_t *pmdp, pte_t *ptep)
-{
-	pmd_val(*pmdp) = (unsigned long)ptep;
-}
-
-#define pte_none(x)			(!pte_val(x))
-#define pte_present(x)			(pte_val(x) & _PAGE_PRESENT)
-#define pte_clear(mm, addr, ptep)	set_pte_at(mm, addr, ptep, __pte(0))
-
-#define pmd_none(x)			(!pmd_val(x))
-#define	pmd_bad(x)			((pmd_val(x) & ~PAGE_MASK))
-#define pmd_present(x)			(pmd_val(x))
-#define pmd_leaf(x)			(pmd_val(x) & _PAGE_HW_SZ)
-#define pmd_clear(xp)			do { pmd_val(*(xp)) = 0; } while (0)
-
-#define pte_page(pte)		pfn_to_page(pte_pfn(pte))
-#define mk_pte(page, prot)	pfn_pte(page_to_pfn(page), prot)
-#define pfn_pte(pfn, prot)	__pte(__pfn_to_phys(pfn) | pgprot_val(prot))
-
-/* Don't use virt_to_pfn for macros below: could cause truncations for PAE40*/
-#define pte_pfn(pte)		(pte_val(pte) >> PAGE_SHIFT)
-
-/* Zoo of pte_xxx function */
-#define pte_read(pte)		(pte_val(pte) & _PAGE_READ)
-#define pte_write(pte)		(pte_val(pte) & _PAGE_WRITE)
-#define pte_dirty(pte)		(pte_val(pte) & _PAGE_DIRTY)
-#define pte_young(pte)		(pte_val(pte) & _PAGE_ACCESSED)
-#define pte_special(pte)	(pte_val(pte) & _PAGE_SPECIAL)
-
-#define PTE_BIT_FUNC(fn, op) \
-	static inline pte_t pte_##fn(pte_t pte) { pte_val(pte) op; return pte; }
-
-PTE_BIT_FUNC(mknotpresent,	&= ~(_PAGE_PRESENT));
-PTE_BIT_FUNC(wrprotect,	&= ~(_PAGE_WRITE));
-PTE_BIT_FUNC(mkwrite,	|= (_PAGE_WRITE));
-PTE_BIT_FUNC(mkclean,	&= ~(_PAGE_DIRTY));
-PTE_BIT_FUNC(mkdirty,	|= (_PAGE_DIRTY));
-PTE_BIT_FUNC(mkold,	&= ~(_PAGE_ACCESSED));
-PTE_BIT_FUNC(mkyoung,	|= (_PAGE_ACCESSED));
-PTE_BIT_FUNC(exprotect,	&= ~(_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkexec,	|= (_PAGE_EXECUTE));
-PTE_BIT_FUNC(mkspecial,	|= (_PAGE_SPECIAL));
-PTE_BIT_FUNC(mkhuge,	|= (_PAGE_HW_SZ));
-
-static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
-{
-	return __pte((pte_val(pte) & _PAGE_CHG_MASK) | pgprot_val(newprot));
-}
+extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
 
 /* Macro to mark a page protection as uncacheable */
 #define pgprot_noncached(prot)	(__pgprot(pgprot_val(prot) & ~_PAGE_CACHEABLE))
 
-static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
-			      pte_t *ptep, pte_t pteval)
-{
-	set_pte(ptep, pteval);
-}
-
-/*
- * Macro to quickly access the PGD entry, utlising the fact that some
- * arch may cache the pointer to Page Directory of "current" task
- * in a MMU register
- *
- * Thus task->mm->pgd (3 pointer dereferences, cache misses etc simply
- * becomes read a register
- *
- * ********CAUTION*******:
- * Kernel code might be dealing with some mm_struct of NON "current"
- * Thus use this macro only when you are certain that "current" is current
- * e.g. when dealing with signal frame setup code etc
- */
-#ifdef ARC_USE_SCRATCH_REG
-#define pgd_offset_fast(mm, addr)	\
-({					\
-	pgd_t *pgd_base = (pgd_t *) read_aux_reg(ARC_REG_SCRATCH_DATA0);  \
-	pgd_base + pgd_index(addr);	\
-})
-#else
-#define pgd_offset_fast(mm, addr)	pgd_offset(mm, addr)
-#endif
-
 extern pgd_t swapper_pg_dir[] __aligned(PAGE_SIZE);
-void update_mmu_cache(struct vm_area_struct *vma, unsigned long address,
-		      pte_t *ptep);
-
-/* Encode swap {type,off} tuple into PTE
- * We reserve 13 bits for 5-bit @type, keeping bits 12-5 zero, ensuring that
- * PAGE_PRESENT is zero in a PTE holding swap "identifier"
- */
-#define __swp_entry(type, off)	((swp_entry_t) { \
-					((type) & 0x1f) | ((off) << 13) })
-
-/* Decode a PTE containing swap "identifier "into constituents */
-#define __swp_type(pte_lookalike)	(((pte_lookalike).val) & 0x1f)
-#define __swp_offset(pte_lookalike)	((pte_lookalike).val >> 13)
-
-/* NOPs, to keep generic kernel happy */
-#define __pte_to_swp_entry(pte)	((swp_entry_t) { pte_val(pte) })
-#define __swp_entry_to_pte(x)	((pte_t) { (x).val })
-
-#define kern_addr_valid(addr)	(1)
-
-#define pmd_pgtable(pmd)       ((pgtable_t) pmd_page_vaddr(pmd))
-
-/*
- * remap a physical page `pfn' of size `size' with page protection `prot'
- * into virtual address `from'
- */
-#ifdef CONFIG_TRANSPARENT_HUGEPAGE
-#include <asm/hugepage.h>
-#endif
 
 /* to cope with aliasing VIPT cache */
 #define HAVE_ARCH_UNMAPPED_AREA
diff --git a/arch/arc/include/asm/processor.h b/arch/arc/include/asm/processor.h
index e4031ecd3c8c..f28afcf5c6d1 100644
--- a/arch/arc/include/asm/processor.h
+++ b/arch/arc/include/asm/processor.h
@@ -93,7 +93,7 @@ extern unsigned int get_wchan(struct task_struct *p);
 #define VMALLOC_START	(PAGE_OFFSET - (CONFIG_ARC_KVADDR_SIZE << 20))
 
 /* 1 PGDIR_SIZE each for fixmap/pkmap, 2 PGDIR_SIZE gutter (see asm/highmem.h) */
-#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PGDIR_SIZE * 4)
+#define VMALLOC_SIZE	((CONFIG_ARC_KVADDR_SIZE << 20) - PMD_SIZE * 4)
 
 #define VMALLOC_END	(VMALLOC_START + VMALLOC_SIZE)
 
diff --git a/arch/arc/include/asm/setup.h b/arch/arc/include/asm/setup.h
index 01f85478170d..028a8cf76206 100644
--- a/arch/arc/include/asm/setup.h
+++ b/arch/arc/include/asm/setup.h
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
-#ifndef __ASMARC_SETUP_H
-#define __ASMARC_SETUP_H
+#ifndef __ASM_ARC_SETUP_H
+#define __ASM_ARC_SETUP_H
 
 
 #include <linux/types.h>
@@ -34,4 +34,12 @@ long __init arc_get_mem_sz(void);
 #define IS_AVAIL2(v, s, cfg)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_USED_CFG(cfg))
 #define IS_AVAIL3(v, v2, s)	IS_AVAIL1(v, s), IS_AVAIL1(v, IS_DISABLED_RUN(v2))
 
+extern void arc_mmu_init(void);
+extern char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_mmu_bcr(void);
+
+extern void arc_cache_init(void);
+extern char *arc_cache_mumbojumbo(int cpu_id, char *buf, int len);
+extern void read_decode_cache_bcr(void);
+
 #endif /* __ASMARC_SETUP_H */
diff --git a/arch/arc/include/asm/smp.h b/arch/arc/include/asm/smp.h
index c5de4008d19f..d856491606ac 100644
--- a/arch/arc/include/asm/smp.h
+++ b/arch/arc/include/asm/smp.h
@@ -105,7 +105,6 @@ static inline const char *arc_platform_smp_cpuinfo(void)
 #include <asm/spinlock.h>
 
 extern arch_spinlock_t smp_atomic_ops_lock;
-extern arch_spinlock_t smp_bitops_lock;
 
 #define atomic_ops_lock(flags)	do {		\
 	local_irq_save(flags);			\
@@ -117,24 +116,11 @@ extern arch_spinlock_t smp_bitops_lock;
 	local_irq_restore(flags);		\
 } while (0)
 
-#define bitops_lock(flags)	do {		\
-	local_irq_save(flags);			\
-	arch_spin_lock(&smp_bitops_lock);	\
-} while (0)
-
-#define bitops_unlock(flags) do {		\
-	arch_spin_unlock(&smp_bitops_lock);	\
-	local_irq_restore(flags);		\
-} while (0)
-
 #else /* !CONFIG_SMP */
 
 #define atomic_ops_lock(flags)		local_irq_save(flags)
 #define atomic_ops_unlock(flags)	local_irq_restore(flags)
 
-#define bitops_lock(flags)		local_irq_save(flags)
-#define bitops_unlock(flags)		local_irq_restore(flags)
-
 #endif /* !CONFIG_SMP */
 
 #endif	/* !CONFIG_ARC_HAS_LLSC */
diff --git a/arch/arc/include/asm/tlb-mmu1.h b/arch/arc/include/asm/tlb-mmu1.h
deleted file mode 100644
index a3083b36f5f4..000000000000
--- a/arch/arc/include/asm/tlb-mmu1.h
+++ /dev/null
@@ -1,101 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- */
-
-#ifndef __ASM_TLB_MMU_V1_H__
-#define __ASM_TLB_MMU_V1_H__
-
-#include <asm/mmu.h>
-
-#if defined(__ASSEMBLY__) && (CONFIG_ARC_MMU_VER == 1)
-
-.macro TLB_WRITE_HEURISTICS
-
-#define JH_HACK1
-#undef JH_HACK2
-#undef JH_HACK3
-
-#ifdef JH_HACK3
-; Calculate set index for 2-way MMU
-; -avoiding use of GetIndex from MMU
-;   and its unpleasant LFSR pseudo-random sequence
-;
-; r1 = TLBPD0 from TLB_RELOAD above
-;
-; -- jh_ex_way_set not cleared on startup
-;    didn't want to change setup.c
-;    hence extra instruction to clean
-;
-; -- should be in cache since in same line
-;    as r0/r1 saves above
-;
-ld  r0,[jh_ex_way_sel]  ; victim pointer
-and r0,r0,1         ; clean
-xor.f   r0,r0,1         ; flip
-st  r0,[jh_ex_way_sel]  ; store back
-asr r0,r1,12        ; get set # <<1, note bit 12=R=0
-or.nz   r0,r0,1         ; set way bit
-and r0,r0,0xff      ; clean
-sr  r0,[ARC_REG_TLBINDEX]
-#endif
-
-#ifdef JH_HACK2
-; JH hack #2
-;  Faster than hack #1 in non-thrash case, but hard-coded for 2-way MMU
-;  Slower in thrash case (where it matters) because more code is executed
-;  Inefficient due to two-register paradigm of this miss handler
-;
-/* r1 = data TLBPD0 at this point */
-lr      r0,[eret]               /* instruction address */
-xor     r0,r0,r1                /* compare set #       */
-and.f   r0,r0,0x000fe000        /* 2-way MMU mask      */
-bne     88f                     /* not in same set - no need to probe */
-
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-; lr  r1,[ARC_REG_TLBPD0]     /* Data VPN+ASID - already in r1 from TLB_RELOAD*/
-and     r1,r1,0xff              /* Data ASID */
-or      r0,r0,r1                /* Instruction address + Data ASID */
-
-lr      r1,[ARC_REG_TLBPD0]     /* save TLBPD0 containing data TLB*/
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r1,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-xor     r0,r0,1                 /* flip bottom bit of data index */
-b.d     89f
-sr      r0,[ARC_REG_TLBINDEX]   /* and put it back */
-88:
-sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
-89:
-#endif
-
-#ifdef JH_HACK1
-;
-; Always checks whether instruction will be kicked out by dtlb miss
-;
-mov_s   r3, r1                  ; save PD0 prepared by TLB_RELOAD in r3
-lr      r0,[eret]               /* instruction address */
-and     r0,r0,PAGE_MASK         /* VPN of instruction address */
-bmsk    r1,r3,7                 /* Data ASID, bits 7-0 */
-or_s    r0,r0,r1                /* Instruction address + Data ASID */
-
-sr      r0,[ARC_REG_TLBPD0]     /* write instruction address to TLBPD0 */
-sr      TLBProbe, [ARC_REG_TLBCOMMAND] /* Look for instruction */
-lr      r0,[ARC_REG_TLBINDEX]   /* r0 = index where instruction is, if at all */
-sr      r3,[ARC_REG_TLBPD0]     /* restore TLBPD0 */
-
-sr      TLBGetIndex, [ARC_REG_TLBCOMMAND]
-lr      r1,[ARC_REG_TLBINDEX]   /* r1 = index where MMU wants to put data */
-cmp     r0,r1                   /* if no match on indices, go around */
-xor.eq  r1,r1,1                 /* flip bottom bit of data index */
-sr      r1,[ARC_REG_TLBINDEX]   /* and put it back */
-#endif
-
-.endm
-
-#endif
-
-#endif
diff --git a/arch/arc/kernel/entry-arcv2.S b/arch/arc/kernel/entry-arcv2.S
index 12d5f12d10d2..a7e6a2174187 100644
--- a/arch/arc/kernel/entry-arcv2.S
+++ b/arch/arc/kernel/entry-arcv2.S
@@ -10,6 +10,7 @@
 #include <asm/errno.h>
 #include <asm/arcregs.h>
 #include <asm/irqflags.h>
+#include <asm/mmu.h>
 
 ; A maximum number of supported interrupts in the core interrupt controller.
 ; This number is not equal to the maximum interrupt number (256) because
diff --git a/arch/arc/kernel/entry.S b/arch/arc/kernel/entry.S
index 2cb8dfe866b6..dd77a0c8f740 100644
--- a/arch/arc/kernel/entry.S
+++ b/arch/arc/kernel/entry.S
@@ -101,11 +101,8 @@ ENTRY(EV_MachineCheck)
 	lr  r0, [efa]
 	mov r1, sp
 
-	; hardware auto-disables MMU, re-enable it to allow kernel vaddr
-	; access for say stack unwinding of modules for crash dumps
-	lr	r3, [ARC_REG_PID]
-	or	r3, r3, MMU_ENABLE
-	sr	r3, [ARC_REG_PID]
+	; MC excpetions disable MMU
+	ARC_MMU_REENABLE r3
 
 	lsr  	r3, r2, 8
 	bmsk 	r3, r3, 7
diff --git a/arch/arc/kernel/intc-compact.c b/arch/arc/kernel/intc-compact.c
index a86641b91e65..6885e422870e 100644
--- a/arch/arc/kernel/intc-compact.c
+++ b/arch/arc/kernel/intc-compact.c
@@ -142,7 +142,7 @@ IRQCHIP_DECLARE(arc_intc, "snps,arc700-intc", init_onchip_IRQ);
  *    Time hard-ISR, timer_interrupt( ) calls spin_unlock_irq several times.
  *    Here local_irq_enable( ) shd not re-enable lower priority interrupts
  * -If called from soft-ISR, it must re-enable all interrupts
- *    soft ISR are low prioity jobs which can be very slow, thus all IRQs
+ *    soft ISR are low priority jobs which can be very slow, thus all IRQs
  *    must be enabled while they run.
  *    Now hardware context wise we may still be in L2 ISR (not done rtie)
  *    still we must re-enable both L1 and L2 IRQs
diff --git a/arch/arc/kernel/smp.c b/arch/arc/kernel/smp.c
index db0e104d6835..78e6d069b1c1 100644
--- a/arch/arc/kernel/smp.c
+++ b/arch/arc/kernel/smp.c
@@ -29,10 +29,8 @@
 
 #ifndef CONFIG_ARC_HAS_LLSC
 arch_spinlock_t smp_atomic_ops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
-arch_spinlock_t smp_bitops_lock = __ARCH_SPIN_LOCK_UNLOCKED;
 
 EXPORT_SYMBOL_GPL(smp_atomic_ops_lock);
-EXPORT_SYMBOL_GPL(smp_bitops_lock);
 #endif
 
 struct plat_smp_ops  __weak plat_smp_ops;
@@ -283,7 +281,7 @@ static void ipi_send_msg_one(int cpu, enum ipi_msg_type msg)
 	/*
 	 * Call the platform specific IPI kick function, but avoid if possible:
 	 * Only do so if there's no pending msg from other concurrent sender(s).
-	 * Otherwise, recevier will see this msg as well when it takes the
+	 * Otherwise, receiver will see this msg as well when it takes the
 	 * IPI corresponding to that msg. This is true, even if it is already in
 	 * IPI handler, because !@old means it has not yet dequeued the msg(s)
 	 * so @new msg can be a free-loader
diff --git a/arch/arc/kernel/stacktrace.c b/arch/arc/kernel/stacktrace.c
index 1b9576d21e24..c376ff3147e7 100644
--- a/arch/arc/kernel/stacktrace.c
+++ b/arch/arc/kernel/stacktrace.c
@@ -149,7 +149,7 @@ arc_unwind_core(struct task_struct *tsk, struct pt_regs *regs,
 #else
 	/* On ARC, only Dward based unwinder works. fp based backtracing is
 	 * not possible (-fno-omit-frame-pointer) because of the way function
-	 * prelogue is setup (callee regs saved and then fp set and not other
+	 * prologue is setup (callee regs saved and then fp set and not other
 	 * way around
 	 */
 	pr_warn_once("CONFIG_ARC_DW2_UNWIND needs to be enabled\n");
diff --git a/arch/arc/kernel/traps.c b/arch/arc/kernel/traps.c
index 57235e5c0cea..6b83e3f2b41c 100644
--- a/arch/arc/kernel/traps.c
+++ b/arch/arc/kernel/traps.c
@@ -20,11 +20,6 @@
 #include <asm/unaligned.h>
 #include <asm/kprobes.h>
 
-void __init trap_init(void)
-{
-	return;
-}
-
 void die(const char *str, struct pt_regs *regs, unsigned long address)
 {
 	show_kernel_fault_diag(str, regs, address);
diff --git a/arch/arc/mm/cache.c b/arch/arc/mm/cache.c
index a2fbea3ee07c..8aa1231865d1 100644
--- a/arch/arc/mm/cache.c
+++ b/arch/arc/mm/cache.c
@@ -205,93 +205,24 @@ slc_chk:
 #define OP_INV_IC	0x4
 
 /*
- *		I-Cache Aliasing in ARC700 VIPT caches (MMU v1-v3)
+ * Cache Flush programming model
  *
- * ARC VIPT I-cache uses vaddr to index into cache and paddr to match the tag.
- * The orig Cache Management Module "CDU" only required paddr to invalidate a
- * certain line since it sufficed as index in Non-Aliasing VIPT cache-geometry.
- * Infact for distinct V1,V2,P: all of {V1-P},{V2-P},{P-P} would end up fetching
- * the exact same line.
+ * ARC700 MMUv3 I$ and D$ are both VIPT and can potentially alias.
+ * Programming model requires both paddr and vaddr irrespecive of aliasing
+ * considerations:
+ *  - vaddr in {I,D}C_IV?L
+ *  - paddr in {I,D}C_PTAG
  *
- * However for larger Caches (way-size > page-size) - i.e. in Aliasing config,
- * paddr alone could not be used to correctly index the cache.
+ * In HS38x (MMUv4), D$ is PIPT, I$ is VIPT and can still alias.
+ * Programming model is different for aliasing vs. non-aliasing I$
+ *  - D$ / Non-aliasing I$: only paddr in {I,D}C_IV?L
+ *  - Aliasing I$: same as ARC700 above (so MMUv3 routine used for MMUv4 I$)
  *
- * ------------------
- * MMU v1/v2 (Fixed Page Size 8k)
- * ------------------
- * The solution was to provide CDU with these additonal vaddr bits. These
- * would be bits [x:13], x would depend on cache-geometry, 13 comes from
- * standard page size of 8k.
- * H/w folks chose [17:13] to be a future safe range, and moreso these 5 bits
- * of vaddr could easily be "stuffed" in the paddr as bits [4:0] since the
- * orig 5 bits of paddr were anyways ignored by CDU line ops, as they
- * represent the offset within cache-line. The adv of using this "clumsy"
- * interface for additional info was no new reg was needed in CDU programming
- * model.
- *
- * 17:13 represented the max num of bits passable, actual bits needed were
- * fewer, based on the num-of-aliases possible.
- * -for 2 alias possibility, only bit 13 needed (32K cache)
- * -for 4 alias possibility, bits 14:13 needed (64K cache)
- *
- * ------------------
- * MMU v3
- * ------------------
- * This ver of MMU supports variable page sizes (1k-16k): although Linux will
- * only support 8k (default), 16k and 4k.
- * However from hardware perspective, smaller page sizes aggravate aliasing
- * meaning more vaddr bits needed to disambiguate the cache-line-op ;
- * the existing scheme of piggybacking won't work for certain configurations.
- * Two new registers IC_PTAG and DC_PTAG inttoduced.
- * "tag" bits are provided in PTAG, index bits in existing IVIL/IVDL/FLDL regs
+ *  - If PAE40 is enabled, independent of aliasing considerations, the higher
+ *    bits needs to be written into PTAG_HI
  */
 
 static inline
-void __cache_line_loop_v2(phys_addr_t paddr, unsigned long vaddr,
-			  unsigned long sz, const int op, const int full_page)
-{
-	unsigned int aux_cmd;
-	int num_lines;
-
-	if (op == OP_INV_IC) {
-		aux_cmd = ARC_REG_IC_IVIL;
-	} else {
-		/* d$ cmd: INV (discard or wback-n-discard) OR FLUSH (wback) */
-		aux_cmd = op & OP_INV ? ARC_REG_DC_IVDL : ARC_REG_DC_FLDL;
-	}
-
-	/* Ensure we properly floor/ceil the non-line aligned/sized requests
-	 * and have @paddr - aligned to cache line and integral @num_lines.
-	 * This however can be avoided for page sized since:
-	 *  -@paddr will be cache-line aligned already (being page aligned)
-	 *  -@sz will be integral multiple of line size (being page sized).
-	 */
-	if (!full_page) {
-		sz += paddr & ~CACHE_LINE_MASK;
-		paddr &= CACHE_LINE_MASK;
-		vaddr &= CACHE_LINE_MASK;
-	}
-
-	num_lines = DIV_ROUND_UP(sz, L1_CACHE_BYTES);
-
-	/* MMUv2 and before: paddr contains stuffed vaddrs bits */
-	paddr |= (vaddr >> PAGE_SHIFT) & 0x1F;
-
-	while (num_lines-- > 0) {
-		write_aux_reg(aux_cmd, paddr);
-		paddr += L1_CACHE_BYTES;
-	}
-}
-
-/*
- * For ARC700 MMUv3 I-cache and D-cache flushes
- *  - ARC700 programming model requires paddr and vaddr be passed in seperate
- *    AUX registers (*_IV*L and *_PTAG respectively) irrespective of whether the
- *    caches actually alias or not.
- * -  For HS38, only the aliasing I-cache configuration uses the PTAG reg
- *    (non aliasing I-cache version doesn't; while D-cache can't possibly alias)
- */
-static inline
 void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 			  unsigned long sz, const int op, const int full_page)
 {
@@ -350,17 +281,6 @@ void __cache_line_loop_v3(phys_addr_t paddr, unsigned long vaddr,
 #ifndef USE_RGN_FLSH
 
 /*
- * In HS38x (MMU v4), I-cache is VIPT (can alias), D-cache is PIPT
- * Here's how cache ops are implemented
- *
- *  - D-cache: only paddr needed (in DC_IVDL/DC_FLDL)
- *  - I-cache Non Aliasing: Despite VIPT, only paddr needed (in IC_IVIL)
- *  - I-cache Aliasing: Both vaddr and paddr needed (in IC_IVIL, IC_PTAG
- *    respectively, similar to MMU v3 programming model, hence
- *    __cache_line_loop_v3() is used)
- *
- * If PAE40 is enabled, independent of aliasing considerations, the higher bits
- * needs to be written into PTAG_HI
  */
 static inline
 void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
@@ -460,11 +380,9 @@ void __cache_line_loop_v4(phys_addr_t paddr, unsigned long vaddr,
 
 #endif
 
-#if (CONFIG_ARC_MMU_VER < 3)
-#define __cache_line_loop	__cache_line_loop_v2
-#elif (CONFIG_ARC_MMU_VER == 3)
+#ifdef CONFIG_ARC_MMU_V3
 #define __cache_line_loop	__cache_line_loop_v3
-#elif (CONFIG_ARC_MMU_VER > 3)
+#else
 #define __cache_line_loop	__cache_line_loop_v4
 #endif
 
@@ -1123,7 +1041,7 @@ void clear_user_page(void *to, unsigned long u_vaddr, struct page *page)
 	clear_page(to);
 	clear_bit(PG_dc_clean, &page->flags);
 }
-
+EXPORT_SYMBOL(clear_user_page);
 
 /**********************************************************************
  * Explicit Cache flush request from user space via syscall
diff --git a/arch/arc/mm/fault.c b/arch/arc/mm/fault.c
index f5657cb68e4f..5787c261c9a4 100644
--- a/arch/arc/mm/fault.c
+++ b/arch/arc/mm/fault.c
@@ -33,28 +33,34 @@ noinline static int handle_kernel_vaddr_fault(unsigned long address)
 	pud_t *pud, *pud_k;
 	pmd_t *pmd, *pmd_k;
 
-	pgd = pgd_offset_fast(current->active_mm, address);
+	pgd = pgd_offset(current->active_mm, address);
 	pgd_k = pgd_offset_k(address);
 
-	if (!pgd_present(*pgd_k))
+	if (pgd_none (*pgd_k))
 		goto bad_area;
+	if (!pgd_present(*pgd))
+		set_pgd(pgd, *pgd_k);
 
 	p4d = p4d_offset(pgd, address);
 	p4d_k = p4d_offset(pgd_k, address);
-	if (!p4d_present(*p4d_k))
+	if (p4d_none(*p4d_k))
 		goto bad_area;
+	if (!p4d_present(*p4d))
+		set_p4d(p4d, *p4d_k);
 
 	pud = pud_offset(p4d, address);
 	pud_k = pud_offset(p4d_k, address);
-	if (!pud_present(*pud_k))
+	if (pud_none(*pud_k))
 		goto bad_area;
+	if (!pud_present(*pud))
+		set_pud(pud, *pud_k);
 
 	pmd = pmd_offset(pud, address);
 	pmd_k = pmd_offset(pud_k, address);
-	if (!pmd_present(*pmd_k))
+	if (pmd_none(*pmd_k))
 		goto bad_area;
-
-	set_pmd(pmd, *pmd_k);
+	if (!pmd_present(*pmd))
+		set_pmd(pmd, *pmd_k);
 
 	/* XXX: create the TLB entry here */
 	return 0;
diff --git a/arch/arc/mm/init.c b/arch/arc/mm/init.c
index c083bf660cec..699ecf119641 100644
--- a/arch/arc/mm/init.c
+++ b/arch/arc/mm/init.c
@@ -189,6 +189,11 @@ void __init mem_init(void)
 {
 	memblock_free_all();
 	highmem_init();
+
+	BUILD_BUG_ON((PTRS_PER_PGD * sizeof(pgd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PUD * sizeof(pud_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PMD * sizeof(pmd_t)) > PAGE_SIZE);
+	BUILD_BUG_ON((PTRS_PER_PTE * sizeof(pte_t)) > PAGE_SIZE);
 }
 
 #ifdef CONFIG_HIGHMEM
diff --git a/arch/arc/mm/ioremap.c b/arch/arc/mm/ioremap.c
index 95c649fbc95a..0ee75aca6e10 100644
--- a/arch/arc/mm/ioremap.c
+++ b/arch/arc/mm/ioremap.c
@@ -39,7 +39,8 @@ void __iomem *ioremap(phys_addr_t paddr, unsigned long size)
 	if (arc_uncached_addr_space(paddr))
 		return (void __iomem *)(u32)paddr;
 
-	return ioremap_prot(paddr, size, PAGE_KERNEL_NO_CACHE);
+	return ioremap_prot(paddr, size,
+			    pgprot_val(pgprot_noncached(PAGE_KERNEL)));
 }
 EXPORT_SYMBOL(ioremap);
 
diff --git a/arch/arc/mm/tlb.c b/arch/arc/mm/tlb.c
index 9c7c68247289..5f71445f26bd 100644
--- a/arch/arc/mm/tlb.c
+++ b/arch/arc/mm/tlb.c
@@ -1,51 +1,9 @@
 // SPDX-License-Identifier: GPL-2.0-only
 /*
- * TLB Management (flush/create/diagnostics) for ARC700
+ * TLB Management (flush/create/diagnostics) for MMUv3 and MMUv4
  *
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  *
- * vineetg: Aug 2011
- *  -Reintroduce duplicate PD fixup - some customer chips still have the issue
- *
- * vineetg: May 2011
- *  -No need to flush_cache_page( ) for each call to update_mmu_cache()
- *   some of the LMBench tests improved amazingly
- *      = page-fault thrice as fast (75 usec to 28 usec)
- *      = mmap twice as fast (9.6 msec to 4.6 msec),
- *      = fork (5.3 msec to 3.7 msec)
- *
- * vineetg: April 2011 :
- *  -MMU v3: PD{0,1} bits layout changed: They don't overlap anymore,
- *      helps avoid a shift when preparing PD0 from PTE
- *
- * vineetg: April 2011 : Preparing for MMU V3
- *  -MMU v2/v3 BCRs decoded differently
- *  -Remove TLB_SIZE hardcoding as it's variable now: 256 or 512
- *  -tlb_entry_erase( ) can be void
- *  -local_flush_tlb_range( ):
- *      = need not "ceil" @end
- *      = walks MMU only if range spans < 32 entries, as opposed to 256
- *
- * Vineetg: Sept 10th 2008
- *  -Changes related to MMU v2 (Rel 4.8)
- *
- * Vineetg: Aug 29th 2008
- *  -In TLB Flush operations (Metal Fix MMU) there is a explicit command to
- *    flush Micro-TLBS. If TLB Index Reg is invalid prior to TLBIVUTLB cmd,
- *    it fails. Thus need to load it with ANY valid value before invoking
- *    TLBIVUTLB cmd
- *
- * Vineetg: Aug 21th 2008:
- *  -Reduced the duration of IRQ lockouts in TLB Flush routines
- *  -Multiple copies of TLB erase code separated into a "single" function
- *  -In TLB Flush routines, interrupt disabling moved UP to retrieve ASID
- *       in interrupt-safe region.
- *
- * Vineetg: April 23rd Bug #93131
- *    Problem: tlb_flush_kernel_range() doesn't do anything if the range to
- *              flush is more than the size of TLB itself.
- *
- * Rahul Trivedi : Codito Technologies 2004
  */
 
 #include <linux/module.h>
@@ -57,47 +15,6 @@
 #include <asm/mmu_context.h>
 #include <asm/mmu.h>
 
-/*			Need for ARC MMU v2
- *
- * ARC700 MMU-v1 had a Joint-TLB for Code and Data and is 2 way set-assoc.
- * For a memcpy operation with 3 players (src/dst/code) such that all 3 pages
- * map into same set, there would be contention for the 2 ways causing severe
- * Thrashing.
- *
- * Although J-TLB is 2 way set assoc, ARC700 caches J-TLB into uTLBS which has
- * much higher associativity. u-D-TLB is 8 ways, u-I-TLB is 4 ways.
- * Given this, the thrashing problem should never happen because once the 3
- * J-TLB entries are created (even though 3rd will knock out one of the prev
- * two), the u-D-TLB and u-I-TLB will have what is required to accomplish memcpy
- *
- * Yet we still see the Thrashing because a J-TLB Write cause flush of u-TLBs.
- * This is a simple design for keeping them in sync. So what do we do?
- * The solution which James came up was pretty neat. It utilised the assoc
- * of uTLBs by not invalidating always but only when absolutely necessary.
- *
- * - Existing TLB commands work as before
- * - New command (TLBWriteNI) for TLB write without clearing uTLBs
- * - New command (TLBIVUTLB) to invalidate uTLBs.
- *
- * The uTLBs need only be invalidated when pages are being removed from the
- * OS page table. If a 'victim' TLB entry is being overwritten in the main TLB
- * as a result of a miss, the removed entry is still allowed to exist in the
- * uTLBs as it is still valid and present in the OS page table. This allows the
- * full associativity of the uTLBs to hide the limited associativity of the main
- * TLB.
- *
- * During a miss handler, the new "TLBWriteNI" command is used to load
- * entries without clearing the uTLBs.
- *
- * When the OS page table is updated, TLB entries that may be associated with a
- * removed page are removed (flushed) from the TLB using TLBWrite. In this
- * circumstance, the uTLBs must also be cleared. This is done by using the
- * existing TLBWrite command. An explicit IVUTLB is also required for those
- * corner cases when TLBWrite was not executed at all because the corresp
- * J-TLB entry got evicted/replaced.
- */
-
-
 /* A copy of the ASID from the PID reg is kept in asid_cache */
 DEFINE_PER_CPU(unsigned int, asid_cache) = MM_CTXT_FIRST_CYCLE;
 
@@ -120,32 +37,10 @@ static inline void __tlb_entry_erase(void)
 
 static void utlb_invalidate(void)
 {
-#if (CONFIG_ARC_MMU_VER >= 2)
-
-#if (CONFIG_ARC_MMU_VER == 2)
-	/* MMU v2 introduced the uTLB Flush command.
-	 * There was however an obscure hardware bug, where uTLB flush would
-	 * fail when a prior probe for J-TLB (both totally unrelated) would
-	 * return lkup err - because the entry didn't exist in MMU.
-	 * The Workaround was to set Index reg with some valid value, prior to
-	 * flush. This was fixed in MMU v3
-	 */
-	unsigned int idx;
-
-	/* make sure INDEX Reg is valid */
-	idx = read_aux_reg(ARC_REG_TLBINDEX);
-
-	/* If not write some dummy val */
-	if (unlikely(idx & TLB_LKUP_ERR))
-		write_aux_reg(ARC_REG_TLBINDEX, 0xa);
-#endif
-
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBIVUTLB);
-#endif
-
 }
 
-#if (CONFIG_ARC_MMU_VER < 4)
+#ifdef CONFIG_ARC_MMU_V3
 
 static inline unsigned int tlb_entry_lkup(unsigned long vaddr_n_asid)
 {
@@ -176,7 +71,7 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	}
 }
 
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	unsigned int idx;
 
@@ -206,7 +101,7 @@ static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBWrite);
 }
 
-#else	/* CONFIG_ARC_MMU_VER >= 4) */
+#else	/* MMUv4 */
 
 static void tlb_entry_erase(unsigned int vaddr_n_asid)
 {
@@ -214,13 +109,16 @@ static void tlb_entry_erase(unsigned int vaddr_n_asid)
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBDeleteEntry);
 }
 
-static void tlb_entry_insert(unsigned int pd0, pte_t pd1)
+static void tlb_entry_insert(unsigned int pd0, phys_addr_t pd1)
 {
 	write_aux_reg(ARC_REG_TLBPD0, pd0);
-	write_aux_reg(ARC_REG_TLBPD1, pd1);
 
-	if (is_pae40_enabled())
+	if (!is_pae40_enabled()) {
+		write_aux_reg(ARC_REG_TLBPD1, pd1);
+	} else {
+		write_aux_reg(ARC_REG_TLBPD1, pd1 & 0xFFFFFFFF);
 		write_aux_reg(ARC_REG_TLBPD1HI, (u64)pd1 >> 32);
+	}
 
 	write_aux_reg(ARC_REG_TLBCOMMAND, TLBInsertEntry);
 }
@@ -496,7 +394,7 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	unsigned long flags;
 	unsigned int asid_or_sasid, rwx;
 	unsigned long pd0;
-	pte_t pd1;
+	phys_addr_t pd1;
 
 	/*
 	 * create_tlb() assumes that current->mm == vma->mm, since
@@ -505,7 +403,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 	 *
 	 * Removing the assumption involves
 	 * -Using vma->mm->context{ASID,SASID}, as opposed to MMU reg.
-	 * -Fix the TLB paranoid debug code to not trigger false negatives.
 	 * -More importantly it makes this handler inconsistent with fast-path
 	 *  TLB Refill handler which always deals with "current"
 	 *
@@ -528,8 +425,6 @@ void create_tlb(struct vm_area_struct *vma, unsigned long vaddr, pte_t *ptep)
 
 	local_irq_save(flags);
 
-	tlb_paranoid_check(asid_mm(vma->vm_mm, smp_processor_id()), vaddr);
-
 	vaddr &= PAGE_MASK;
 
 	/* update this PTE credentials */
@@ -639,43 +534,6 @@ void update_mmu_cache_pmd(struct vm_area_struct *vma, unsigned long addr,
 	update_mmu_cache(vma, addr, &pte);
 }
 
-void pgtable_trans_huge_deposit(struct mm_struct *mm, pmd_t *pmdp,
-				pgtable_t pgtable)
-{
-	struct list_head *lh = (struct list_head *) pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	/* FIFO */
-	if (!pmd_huge_pte(mm, pmdp))
-		INIT_LIST_HEAD(lh);
-	else
-		list_add(lh, (struct list_head *) pmd_huge_pte(mm, pmdp));
-	pmd_huge_pte(mm, pmdp) = pgtable;
-}
-
-pgtable_t pgtable_trans_huge_withdraw(struct mm_struct *mm, pmd_t *pmdp)
-{
-	struct list_head *lh;
-	pgtable_t pgtable;
-
-	assert_spin_locked(&mm->page_table_lock);
-
-	pgtable = pmd_huge_pte(mm, pmdp);
-	lh = (struct list_head *) pgtable;
-	if (list_empty(lh))
-		pmd_huge_pte(mm, pmdp) = NULL;
-	else {
-		pmd_huge_pte(mm, pmdp) = (pgtable_t) lh->next;
-		list_del(lh);
-	}
-
-	pte_val(pgtable[0]) = 0;
-	pte_val(pgtable[1]) = 0;
-
-	return pgtable;
-}
-
 void local_flush_pmd_tlb_range(struct vm_area_struct *vma, unsigned long start,
 			       unsigned long end)
 {
@@ -706,14 +564,6 @@ void read_decode_mmu_bcr(void)
 {
 	struct cpuinfo_arc_mmu *mmu = &cpuinfo_arc700[smp_processor_id()].mmu;
 	unsigned int tmp;
-	struct bcr_mmu_1_2 {
-#ifdef CONFIG_CPU_BIG_ENDIAN
-		unsigned int ver:8, ways:4, sets:4, u_itlb:8, u_dtlb:8;
-#else
-		unsigned int u_dtlb:8, u_itlb:8, sets:4, ways:4, ver:8;
-#endif
-	} *mmu2;
-
 	struct bcr_mmu_3 {
 #ifdef CONFIG_CPU_BIG_ENDIAN
 	unsigned int ver:8, ways:4, sets:4, res:3, sasid:1, pg_sz:4,
@@ -738,23 +588,14 @@ void read_decode_mmu_bcr(void)
 	tmp = read_aux_reg(ARC_REG_MMU_BCR);
 	mmu->ver = (tmp >> 24);
 
-	if (is_isa_arcompact()) {
-		if (mmu->ver <= 2) {
-			mmu2 = (struct bcr_mmu_1_2 *)&tmp;
-			mmu->pg_sz_k = TO_KB(0x2000);
-			mmu->sets = 1 << mmu2->sets;
-			mmu->ways = 1 << mmu2->ways;
-			mmu->u_dtlb = mmu2->u_dtlb;
-			mmu->u_itlb = mmu2->u_itlb;
-		} else {
-			mmu3 = (struct bcr_mmu_3 *)&tmp;
-			mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
-			mmu->sets = 1 << mmu3->sets;
-			mmu->ways = 1 << mmu3->ways;
-			mmu->u_dtlb = mmu3->u_dtlb;
-			mmu->u_itlb = mmu3->u_itlb;
-			mmu->sasid = mmu3->sasid;
-		}
+	if (is_isa_arcompact() && mmu->ver == 3) {
+		mmu3 = (struct bcr_mmu_3 *)&tmp;
+		mmu->pg_sz_k = 1 << (mmu3->pg_sz - 1);
+		mmu->sets = 1 << mmu3->sets;
+		mmu->ways = 1 << mmu3->ways;
+		mmu->u_dtlb = mmu3->u_dtlb;
+		mmu->u_itlb = mmu3->u_itlb;
+		mmu->sasid = mmu3->sasid;
 	} else {
 		mmu4 = (struct bcr_mmu_4 *)&tmp;
 		mmu->pg_sz_k = 1 << (mmu4->sz0 - 1);
@@ -780,8 +621,8 @@ char *arc_mmu_mumbojumbo(int cpu_id, char *buf, int len)
 			  IS_USED_CFG(CONFIG_TRANSPARENT_HUGEPAGE));
 
 	n += scnprintf(buf + n, len - n,
-		      "MMU [v%x]\t: %dk PAGE, %sJTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
-		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,
+		      "MMU [v%x]\t: %dk PAGE, %s, swalk %d lvl, JTLB %d (%dx%d), uDTLB %d, uITLB %d%s%s\n",
+		       p_mmu->ver, p_mmu->pg_sz_k, super_pg,  CONFIG_PGTABLE_LEVELS,
 		       p_mmu->sets * p_mmu->ways, p_mmu->sets, p_mmu->ways,
 		       p_mmu->u_dtlb, p_mmu->u_itlb,
 		       IS_AVAIL2(p_mmu->pae, ", PAE40 ", CONFIG_ARC_HAS_PAE40));
@@ -815,22 +656,17 @@ void arc_mmu_init(void)
 
 	/*
 	 * Ensure that MMU features assumed by kernel exist in hardware.
-	 * For older ARC700 cpus, it has to be exact match, since the MMU
-	 * revisions were not backwards compatible (MMUv3 TLB layout changed
-	 * so even if kernel for v2 didn't use any new cmds of v3, it would
-	 * still not work.
-	 * For HS cpus, MMUv4 was baseline and v5 is backwards compatible
-	 * (will run older software).
+	 *  - For older ARC700 cpus, only v3 supported
+	 *  - For HS cpus, v4 was baseline and v5 is backwards compatible
+	 *    (will run older software).
 	 */
-	if (is_isa_arcompact() && mmu->ver == CONFIG_ARC_MMU_VER)
+	if (is_isa_arcompact() && mmu->ver == 3)
 		compat = 1;
-	else if (is_isa_arcv2() && mmu->ver >= CONFIG_ARC_MMU_VER)
+	else if (is_isa_arcv2() && mmu->ver >= 4)
 		compat = 1;
 
-	if (!compat) {
-		panic("MMU ver %d doesn't match kernel built for %d...\n",
-		      mmu->ver, CONFIG_ARC_MMU_VER);
-	}
+	if (!compat)
+		panic("MMU ver %d doesn't match kernel built for\n", mmu->ver);
 
 	if (mmu->pg_sz_k != TO_KB(PAGE_SIZE))
 		panic("MMU pg size != PAGE_SIZE (%luk)\n", TO_KB(PAGE_SIZE));
@@ -843,14 +679,11 @@ void arc_mmu_init(void)
 	if (IS_ENABLED(CONFIG_ARC_HAS_PAE40) && !mmu->pae)
 		panic("Hardware doesn't support PAE40\n");
 
-	/* Enable the MMU */
-	write_aux_reg(ARC_REG_PID, MMU_ENABLE);
+	/* Enable the MMU with ASID 0 */
+	mmu_setup_asid(NULL, 0);
 
-	/* In smp we use this reg for interrupt 1 scratch */
-#ifdef ARC_USE_SCRATCH_REG
-	/* swapper_pg_dir is the pgd for the kernel, used by vmalloc */
-	write_aux_reg(ARC_REG_SCRATCH_DATA0, swapper_pg_dir);
-#endif
+	/* cache the pgd pointer in MMU SCRATCH reg (ARCv2 only) */
+	mmu_setup_pgd(NULL, swapper_pg_dir);
 
 	if (pae40_exist_but_not_enab())
 		write_aux_reg(ARC_REG_TLBPD1HI, 0);
@@ -945,40 +778,3 @@ void do_tlb_overlap_fault(unsigned long cause, unsigned long address,
 
 	local_irq_restore(flags);
 }
-
-/***********************************************************************
- * Diagnostic Routines
- *  -Called from Low Level TLB Handlers if things don;t look good
- **********************************************************************/
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-/*
- * Low Level ASM TLB handler calls this if it finds that HW and SW ASIDS
- * don't match
- */
-void print_asid_mismatch(int mm_asid, int mmu_asid, int is_fast_path)
-{
-	pr_emerg("ASID Mismatch in %s Path Handler: sw-pid=0x%x hw-pid=0x%x\n",
-	       is_fast_path ? "Fast" : "Slow", mm_asid, mmu_asid);
-
-	__asm__ __volatile__("flag 1");
-}
-
-void tlb_paranoid_check(unsigned int mm_asid, unsigned long addr)
-{
-	unsigned int mmu_asid;
-
-	mmu_asid = read_aux_reg(ARC_REG_PID) & 0xff;
-
-	/*
-	 * At the time of a TLB miss/installation
-	 *   - HW version needs to match SW version
-	 *   - SW needs to have a valid ASID
-	 */
-	if (addr < 0x70000000 &&
-	    ((mm_asid == MM_CTXT_NO_ASID) ||
-	      (mmu_asid != (mm_asid & MM_CTXT_ASID_MASK))))
-		print_asid_mismatch(mm_asid, mmu_asid, 0);
-}
-#endif
diff --git a/arch/arc/mm/tlbex.S b/arch/arc/mm/tlbex.S
index 062fae46c3f8..e054780a8fe0 100644
--- a/arch/arc/mm/tlbex.S
+++ b/arch/arc/mm/tlbex.S
@@ -39,7 +39,6 @@
 #include <asm/arcregs.h>
 #include <asm/cache.h>
 #include <asm/processor.h>
-#include <asm/tlb-mmu1.h>
 
 #ifdef CONFIG_ISA_ARCOMPACT
 ;-----------------------------------------------------------------
@@ -94,11 +93,6 @@ ex_saved_reg1:
 	st_s  r1, [r0, 4]
 	st_s  r2, [r0, 8]
 	st_s  r3, [r0, 12]
-
-	; VERIFY if the ASID in MMU-PID Reg is same as
-	; one in Linux data structures
-
-	tlb_paranoid_check_asm
 .endm
 
 .macro TLBMISS_RESTORE_REGS
@@ -148,53 +142,16 @@ ex_saved_reg1:
 #endif
 
 ;============================================================================
-;  Troubleshooting Stuff
+;TLB Miss handling Code
 ;============================================================================
 
-; Linux keeps ASID (Address Space ID) in task->active_mm->context.asid
-; When Creating TLB Entries, instead of doing 3 dependent loads from memory,
-; we use the MMU PID Reg to get current ASID.
-; In bizzare scenrios SW and HW ASID can get out-of-sync which is trouble.
-; So we try to detect this in TLB Mis shandler
-
-.macro tlb_paranoid_check_asm
-
-#ifdef CONFIG_ARC_DBG_TLB_PARANOIA
-
-	GET_CURR_TASK_ON_CPU  r3
-	ld r0, [r3, TASK_ACT_MM]
-	ld r0, [r0, MM_CTXT+MM_CTXT_ASID]
-	breq r0, 0, 55f	; Error if no ASID allocated
-
-	lr r1, [ARC_REG_PID]
-	and r1, r1, 0xFF
-
-	and r2, r0, 0xFF	; MMU PID bits only for comparison
-	breq r1, r2, 5f
-
-55:
-	; Error if H/w and S/w ASID don't match, but NOT if in kernel mode
-	lr  r2, [erstatus]
-	bbit0 r2, STATUS_U_BIT, 5f
-
-	; We sure are in troubled waters, Flag the error, but to do so
-	; need to switch to kernel mode stack to call error routine
-	GET_TSK_STACK_BASE   r3, sp
-
-	; Call printk to shoutout aloud
-	mov r2, 1
-	j print_asid_mismatch
-
-5:	; ASIDs match so proceed normally
-	nop
-
+#ifndef PMD_SHIFT
+#define PMD_SHIFT PUD_SHIFT
 #endif
 
-.endm
-
-;============================================================================
-;TLB Miss handling Code
-;============================================================================
+#ifndef PUD_SHIFT
+#define PUD_SHIFT PGDIR_SHIFT
+#endif
 
 ;-----------------------------------------------------------------------------
 ; This macro does the page-table lookup for the faulting address.
@@ -203,7 +160,7 @@ ex_saved_reg1:
 
 	lr  r2, [efa]
 
-#ifdef ARC_USE_SCRATCH_REG
+#ifdef CONFIG_ISA_ARCV2
 	lr  r1, [ARC_REG_SCRATCH_DATA0] ; current pgd
 #else
 	GET_CURR_TASK_ON_CPU  r1
@@ -216,6 +173,24 @@ ex_saved_reg1:
 	tst	r3, r3
 	bz	do_slow_path_pf         ; if no Page Table, do page fault
 
+#if CONFIG_PGTABLE_LEVELS > 3
+	lsr     r0, r2, PUD_SHIFT	; Bits for indexing into PUD
+	and	r0, r0, (PTRS_PER_PUD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
+#if CONFIG_PGTABLE_LEVELS > 2
+	lsr     r0, r2, PMD_SHIFT	; Bits for indexing into PMD
+	and	r0, r0, (PTRS_PER_PMD - 1)
+	ld.as	r1, [r3, r0]		; PMD entry
+	tst	r1, r1
+	bz	do_slow_path_pf
+	mov	r3, r1
+#endif
+
 #ifdef CONFIG_TRANSPARENT_HUGEPAGE
 	and.f	0, r3, _PAGE_HW_SZ	; Is this Huge PMD (thp)
 	add2.nz	r1, r1, r0
@@ -279,7 +254,7 @@ ex_saved_reg1:
 ; Commit the TLB entry into MMU
 
 .macro COMMIT_ENTRY_TO_MMU
-#if (CONFIG_ARC_MMU_VER < 4)
+#ifdef CONFIG_ARC_MMU_V3
 
 	/* Get free TLB slot: Set = computed from vaddr, way = random */
 	sr  TLBGetIndex, [ARC_REG_TLBCOMMAND]
@@ -375,13 +350,6 @@ ENTRY(EV_TLBMissD)
 
 	CONV_PTE_TO_TLB
 
-#if (CONFIG_ARC_MMU_VER == 1)
-	; MMU with 2 way set assoc J-TLB, needs some help in pathetic case of
-	; memcpy where 3 parties contend for 2 ways, ensuing a livelock.
-	; But only for old MMU or one with Metal Fix
-	TLB_WRITE_HEURISTICS
-#endif
-
 	COMMIT_ENTRY_TO_MMU
 	TLBMISS_RESTORE_REGS
 EV_TLBMissD_fast_ret:	; additional label for VDK OS-kit instrumentation
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index f1d6531b5ce5..fc196421b2ce 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -124,8 +124,8 @@ config ARM
 	select PCI_SYSCALL if PCI
 	select PERF_USE_VMALLOC
 	select RTC_LIB
-	select SET_FS
 	select SYS_SUPPORTS_APM_EMULATION
+	select TRACE_IRQFLAGS_SUPPORT if !CPU_V7M
 	# Above selects are sorted alphabetically; please add new ones
 	# according to that.  Thanks.
 	help
@@ -189,10 +189,6 @@ config LOCKDEP_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default !CPU_V7M
-
 config ARCH_HAS_ILOG2_U32
 	bool
 
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index 173da685a52e..847c31e7c368 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -308,7 +308,8 @@ $(BOOT_TARGETS): vmlinux
 	@$(kecho) '  Kernel: $(boot)/$@ is ready'
 
 $(INSTALL_TARGETS):
-	$(Q)$(MAKE) $(build)=$(boot) MACHINE=$(MACHINE) $@
+	$(CONFIG_SHELL) $(srctree)/$(boot)/install.sh "$(KERNELRELEASE)" \
+	$(boot)/$(patsubst %install,%Image,$@) System.map "$(INSTALL_PATH)"
 
 PHONY += vdso_install
 vdso_install:
diff --git a/arch/arm/boot/Makefile b/arch/arm/boot/Makefile
index 0b3cd7a33a26..54a09f9464fb 100644
--- a/arch/arm/boot/Makefile
+++ b/arch/arm/boot/Makefile
@@ -96,23 +96,11 @@ $(obj)/bootp/bootp: $(obj)/zImage initrd FORCE
 $(obj)/bootpImage: $(obj)/bootp/bootp FORCE
 	$(call if_changed,objcopy)
 
-PHONY += initrd install zinstall uinstall
+PHONY += initrd
 initrd:
 	@test "$(INITRD_PHYS)" != "" || \
 	(echo This machine does not support INITRD; exit -1)
 	@test "$(INITRD)" != "" || \
 	(echo You must specify INITRD; exit -1)
 
-install:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/Image System.map "$(INSTALL_PATH)"
-
-zinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/zImage System.map "$(INSTALL_PATH)"
-
-uinstall:
-	$(CONFIG_SHELL) $(srctree)/$(src)/install.sh "$(KERNELRELEASE)" \
-	$(obj)/uImage System.map "$(INSTALL_PATH)"
-
 subdir-	    := bootp compressed dts
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 9d91ae1091b0..91265e7ff672 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -85,6 +85,8 @@ compress-$(CONFIG_KERNEL_LZ4)  = lz4
 libfdt_objs := fdt_rw.o fdt_ro.o fdt_wip.o fdt.o
 
 ifeq ($(CONFIG_ARM_ATAG_DTB_COMPAT),y)
+CFLAGS_REMOVE_atags_to_fdt.o += -Wframe-larger-than=${CONFIG_FRAME_WARN}
+CFLAGS_atags_to_fdt.o += -Wframe-larger-than=1280
 OBJS	+= $(libfdt_objs) atags_to_fdt.o
 endif
 ifeq ($(CONFIG_USE_OF),y)
diff --git a/arch/arm/boot/dts/omap34xx.dtsi b/arch/arm/boot/dts/omap34xx.dtsi
index feaa43b78535..8b8451399784 100644
--- a/arch/arm/boot/dts/omap34xx.dtsi
+++ b/arch/arm/boot/dts/omap34xx.dtsi
@@ -24,7 +24,6 @@
 		};
 	};
 
-	/* see Documentation/devicetree/bindings/opp/opp.txt */
 	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi
index 20844dbc002e..22b33098b1a2 100644
--- a/arch/arm/boot/dts/omap36xx.dtsi
+++ b/arch/arm/boot/dts/omap36xx.dtsi
@@ -29,7 +29,6 @@
 		};
 	};
 
-	/* see Documentation/devicetree/bindings/opp/opp.txt */
 	cpu0_opp_table: opp-table {
 		compatible = "operating-points-v2-ti-cpu";
 		syscon = <&scm_conf>;
diff --git a/arch/arm/configs/dove_defconfig b/arch/arm/configs/dove_defconfig
index b935162a8bba..33074fdab2ea 100644
--- a/arch/arm/configs/dove_defconfig
+++ b/arch/arm/configs/dove_defconfig
@@ -56,7 +56,6 @@ CONFIG_ATA=y
 CONFIG_SATA_MV=y
 CONFIG_NETDEVICES=y
 CONFIG_MV643XX_ETH=y
-CONFIG_INPUT_POLLDEV=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
 # CONFIG_KEYBOARD_ATKBD is not set
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 363f1b1b08e3..58f4834289e6 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -284,7 +284,6 @@ CONFIG_RT2800USB=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_INPUT_FF_MEMLESS=m
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_MATRIXKMAP=y
 CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_MOUSEDEV_SCREEN_X=640
diff --git a/arch/arm/include/asm/div64.h b/arch/arm/include/asm/div64.h
index 595e538f5bfb..4b69cf850451 100644
--- a/arch/arm/include/asm/div64.h
+++ b/arch/arm/include/asm/div64.h
@@ -52,17 +52,6 @@ static inline uint32_t __div64_32(uint64_t *n, uint32_t base)
 
 #else
 
-/*
- * gcc versions earlier than 4.0 are simply too problematic for the
- * __div64_const32() code in asm-generic/div64.h. First there is
- * gcc PR 15089 that tend to trig on more complex constructs, spurious
- * .global __udivsi3 are inserted even if none of those symbols are
- * referenced in the generated code, and those gcc versions are not able
- * to do constant propagation on long long values anyway.
- */
-
-#define __div64_const32_is_OK (__GNUC__ >= 4)
-
 static inline uint64_t __arch_xprod_64(uint64_t m, uint64_t n, bool bias)
 {
 	unsigned long long res;
diff --git a/arch/arm/include/asm/gpio.h b/arch/arm/include/asm/gpio.h
index c50e383358c4..f3bb8a2bf788 100644
--- a/arch/arm/include/asm/gpio.h
+++ b/arch/arm/include/asm/gpio.h
@@ -2,10 +2,6 @@
 #ifndef _ARCH_ARM_GPIO_H
 #define _ARCH_ARM_GPIO_H
 
-#if CONFIG_ARCH_NR_GPIO > 0
-#define ARCH_NR_GPIOS CONFIG_ARCH_NR_GPIO
-#endif
-
 /* Note: this may rely upon the value of ARCH_NR_GPIOS set in mach/gpio.h */
 #include <asm-generic/gpio.h>
 
diff --git a/arch/arm/include/asm/ptrace.h b/arch/arm/include/asm/ptrace.h
index 91d6b7856be4..93051e2f402c 100644
--- a/arch/arm/include/asm/ptrace.h
+++ b/arch/arm/include/asm/ptrace.h
@@ -19,7 +19,6 @@ struct pt_regs {
 struct svc_pt_regs {
 	struct pt_regs regs;
 	u32 dacr;
-	u32 addr_limit;
 };
 
 #define to_svc_pt_regs(r) container_of(r, struct svc_pt_regs, regs)
diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h
index fd02761ba06c..24c19d63ff0a 100644
--- a/arch/arm/include/asm/syscall.h
+++ b/arch/arm/include/asm/syscall.h
@@ -22,7 +22,21 @@ extern const unsigned long sys_call_table[];
 static inline int syscall_get_nr(struct task_struct *task,
 				 struct pt_regs *regs)
 {
-	return task_thread_info(task)->syscall;
+	if (IS_ENABLED(CONFIG_AEABI) && !IS_ENABLED(CONFIG_OABI_COMPAT))
+		return task_thread_info(task)->abi_syscall;
+
+	return task_thread_info(task)->abi_syscall & __NR_SYSCALL_MASK;
+}
+
+static inline bool __in_oabi_syscall(struct task_struct *task)
+{
+	return IS_ENABLED(CONFIG_OABI_COMPAT) &&
+		(task_thread_info(task)->abi_syscall & __NR_OABI_SYSCALL_BASE);
+}
+
+static inline bool in_oabi_syscall(void)
+{
+	return __in_oabi_syscall(current);
 }
 
 static inline void syscall_rollback(struct task_struct *task,
diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h
index a02799bd0cdf..9a18da3e10cc 100644
--- a/arch/arm/include/asm/thread_info.h
+++ b/arch/arm/include/asm/thread_info.h
@@ -31,8 +31,6 @@ struct task_struct;
 
 #include <asm/types.h>
 
-typedef unsigned long mm_segment_t;
-
 struct cpu_context_save {
 	__u32	r4;
 	__u32	r5;
@@ -54,7 +52,6 @@ struct cpu_context_save {
 struct thread_info {
 	unsigned long		flags;		/* low level flags */
 	int			preempt_count;	/* 0 => preemptable, <0 => bug */
-	mm_segment_t		addr_limit;	/* address limit */
 	struct task_struct	*task;		/* main task structure */
 	__u32			cpu;		/* cpu */
 	__u32			cpu_domain;	/* cpu domain */
@@ -62,7 +59,7 @@ struct thread_info {
 	unsigned long		stack_canary;
 #endif
 	struct cpu_context_save	cpu_context;	/* cpu context */
-	__u32			syscall;	/* syscall number */
+	__u32			abi_syscall;	/* ABI type and syscall nr */
 	__u8			used_cp[16];	/* thread used copro */
 	unsigned long		tp_value[2];	/* TLS registers */
 	union fp_state		fpstate __attribute__((aligned(8)));
@@ -77,7 +74,6 @@ struct thread_info {
 	.task		= &tsk,						\
 	.flags		= 0,						\
 	.preempt_count	= INIT_PREEMPT_COUNT,				\
-	.addr_limit	= KERNEL_DS,					\
 }
 
 /*
diff --git a/arch/arm/include/asm/uaccess-asm.h b/arch/arm/include/asm/uaccess-asm.h
index e6eb7a2aaf1e..6451a433912c 100644
--- a/arch/arm/include/asm/uaccess-asm.h
+++ b/arch/arm/include/asm/uaccess-asm.h
@@ -84,12 +84,8 @@
 	 * if \disable is set.
 	 */
 	.macro	uaccess_entry, tsk, tmp0, tmp1, tmp2, disable
-	ldr	\tmp1, [\tsk, #TI_ADDR_LIMIT]
-	ldr	\tmp2, =TASK_SIZE
-	str	\tmp2, [\tsk, #TI_ADDR_LIMIT]
  DACR(	mrc	p15, 0, \tmp0, c3, c0, 0)
  DACR(	str	\tmp0, [sp, #SVC_DACR])
-	str	\tmp1, [sp, #SVC_ADDR_LIMIT]
 	.if \disable && IS_ENABLED(CONFIG_CPU_SW_DOMAIN_PAN)
 	/* kernel=client, user=no access */
 	mov	\tmp2, #DACR_UACCESS_DISABLE
@@ -106,9 +102,7 @@
 
 	/* Restore the user access state previously saved by uaccess_entry */
 	.macro	uaccess_exit, tsk, tmp0, tmp1
-	ldr	\tmp1, [sp, #SVC_ADDR_LIMIT]
  DACR(	ldr	\tmp0, [sp, #SVC_DACR])
-	str	\tmp1, [\tsk, #TI_ADDR_LIMIT]
  DACR(	mcr	p15, 0, \tmp0, c3, c0, 0)
 	.endm
 
diff --git a/arch/arm/include/asm/uaccess.h b/arch/arm/include/asm/uaccess.h
index a13d90206472..084d1c07c2d0 100644
--- a/arch/arm/include/asm/uaccess.h
+++ b/arch/arm/include/asm/uaccess.h
@@ -52,32 +52,8 @@ static __always_inline void uaccess_restore(unsigned int flags)
 extern int __get_user_bad(void);
 extern int __put_user_bad(void);
 
-/*
- * Note that this is actually 0x1,0000,0000
- */
-#define KERNEL_DS	0x00000000
-
 #ifdef CONFIG_MMU
 
-#define USER_DS		TASK_SIZE
-#define get_fs()	(current_thread_info()->addr_limit)
-
-static inline void set_fs(mm_segment_t fs)
-{
-	current_thread_info()->addr_limit = fs;
-
-	/*
-	 * Prevent a mispredicted conditional call to set_fs from forwarding
-	 * the wrong address limit to access_ok under speculation.
-	 */
-	dsb(nsh);
-	isb();
-
-	modify_domain(DOMAIN_KERNEL, fs ? DOMAIN_CLIENT : DOMAIN_MANAGER);
-}
-
-#define uaccess_kernel()	(get_fs() == KERNEL_DS)
-
 /*
  * We use 33-bit arithmetic here.  Success returns zero, failure returns
  * addr_limit.  We take advantage that addr_limit will be zero for KERNEL_DS,
@@ -89,7 +65,7 @@ static inline void set_fs(mm_segment_t fs)
 	__asm__(".syntax unified\n" \
 		"adds %1, %2, %3; sbcscc %1, %1, %0; movcc %0, #0" \
 		: "=&r" (flag), "=&r" (roksum) \
-		: "r" (addr), "Ir" (size), "0" (current_thread_info()->addr_limit) \
+		: "r" (addr), "Ir" (size), "0" (TASK_SIZE) \
 		: "cc"); \
 	flag; })
 
@@ -120,7 +96,7 @@ static inline void __user *__uaccess_mask_range_ptr(const void __user *ptr,
 	"	subshs	%1, %1, %2\n"
 	"	movlo	%0, #0\n"
 	: "+r" (safe_ptr), "=&r" (tmp)
-	: "r" (size), "r" (current_thread_info()->addr_limit)
+	: "r" (size), "r" (TASK_SIZE)
 	: "cc");
 
 	csdb();
@@ -194,7 +170,7 @@ extern int __get_user_64t_4(void *);
 
 #define __get_user_check(x, p)						\
 	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		unsigned long __limit = TASK_SIZE - 1; \
 		register typeof(*(p)) __user *__p asm("r0") = (p);	\
 		register __inttype(x) __r2 asm("r2");			\
 		register unsigned long __l asm("r1") = __limit;		\
@@ -245,7 +221,7 @@ extern int __put_user_8(void *, unsigned long long);
 
 #define __put_user_check(__pu_val, __ptr, __err, __s)			\
 	({								\
-		unsigned long __limit = current_thread_info()->addr_limit - 1; \
+		unsigned long __limit = TASK_SIZE - 1; \
 		register typeof(__pu_val) __r2 asm("r2") = __pu_val;	\
 		register const void __user *__p asm("r0") = __ptr;	\
 		register unsigned long __l asm("r1") = __limit;		\
@@ -262,19 +238,8 @@ extern int __put_user_8(void *, unsigned long long);
 
 #else /* CONFIG_MMU */
 
-/*
- * uClinux has only one addr space, so has simplified address limits.
- */
-#define USER_DS			KERNEL_DS
-
-#define uaccess_kernel()	(true)
 #define __addr_ok(addr)		((void)(addr), 1)
 #define __range_ok(addr, size)	((void)(addr), 0)
-#define get_fs()		(KERNEL_DS)
-
-static inline void set_fs(mm_segment_t fs)
-{
-}
 
 #define get_user(x, p)	__get_user(x, p)
 #define __put_user_check __put_user_nocheck
@@ -283,9 +248,6 @@ static inline void set_fs(mm_segment_t fs)
 
 #define access_ok(addr, size)	(__range_ok(addr, size) == 0)
 
-#define user_addr_max() \
-	(uaccess_kernel() ? ~0UL : get_fs())
-
 #ifdef CONFIG_CPU_SPECTRE
 /*
  * When mitigating Spectre variant 1, it is not worth fixing the non-
@@ -308,11 +270,11 @@ static inline void set_fs(mm_segment_t fs)
 #define __get_user(x, ptr)						\
 ({									\
 	long __gu_err = 0;						\
-	__get_user_err((x), (ptr), __gu_err);				\
+	__get_user_err((x), (ptr), __gu_err, TUSER());			\
 	__gu_err;							\
 })
 
-#define __get_user_err(x, ptr, err)					\
+#define __get_user_err(x, ptr, err, __t)				\
 do {									\
 	unsigned long __gu_addr = (unsigned long)(ptr);			\
 	unsigned long __gu_val;						\
@@ -321,18 +283,19 @@ do {									\
 	might_fault();							\
 	__ua_flags = uaccess_save_and_enable();				\
 	switch (sizeof(*(ptr))) {					\
-	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err);	break;	\
-	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err);	break;	\
-	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err);	break;	\
+	case 1:	__get_user_asm_byte(__gu_val, __gu_addr, err, __t); break;	\
+	case 2:	__get_user_asm_half(__gu_val, __gu_addr, err, __t); break;	\
+	case 4:	__get_user_asm_word(__gu_val, __gu_addr, err, __t); break;	\
 	default: (__gu_val) = __get_user_bad();				\
 	}								\
 	uaccess_restore(__ua_flags);					\
 	(x) = (__typeof__(*(ptr)))__gu_val;				\
 } while (0)
+#endif
 
 #define __get_user_asm(x, addr, err, instr)			\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
+	"1:	" instr " %1, [%2], #0\n"			\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -348,40 +311,38 @@ do {									\
 	: "r" (addr), "i" (-EFAULT)				\
 	: "cc")
 
-#define __get_user_asm_byte(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldrb)
+#define __get_user_asm_byte(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldrb" __t)
 
 #if __LINUX_ARM_ARCH__ >= 6
 
-#define __get_user_asm_half(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldrh)
+#define __get_user_asm_half(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldrh" __t)
 
 #else
 
 #ifndef __ARMEB__
-#define __get_user_asm_half(x, __gu_addr, err)			\
+#define __get_user_asm_half(x, __gu_addr, err, __t)		\
 ({								\
 	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	__get_user_asm_byte(__b1, __gu_addr, err, __t);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err, __t);	\
 	(x) = __b1 | (__b2 << 8);				\
 })
 #else
-#define __get_user_asm_half(x, __gu_addr, err)			\
+#define __get_user_asm_half(x, __gu_addr, err, __t)		\
 ({								\
 	unsigned long __b1, __b2;				\
-	__get_user_asm_byte(__b1, __gu_addr, err);		\
-	__get_user_asm_byte(__b2, __gu_addr + 1, err);		\
+	__get_user_asm_byte(__b1, __gu_addr, err, __t);		\
+	__get_user_asm_byte(__b2, __gu_addr + 1, err, __t);	\
 	(x) = (__b1 << 8) | __b2;				\
 })
 #endif
 
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
-#define __get_user_asm_word(x, addr, err)			\
-	__get_user_asm(x, addr, err, ldr)
-#endif
-
+#define __get_user_asm_word(x, addr, err, __t)			\
+	__get_user_asm(x, addr, err, "ldr" __t)
 
 #define __put_user_switch(x, ptr, __err, __fn)				\
 	do {								\
@@ -425,7 +386,7 @@ do {									\
 #define __put_user_nocheck(x, __pu_ptr, __err, __size)			\
 	do {								\
 		unsigned long __pu_addr = (unsigned long)__pu_ptr;	\
-		__put_user_nocheck_##__size(x, __pu_addr, __err);	\
+		__put_user_nocheck_##__size(x, __pu_addr, __err, TUSER());\
 	} while (0)
 
 #define __put_user_nocheck_1 __put_user_asm_byte
@@ -433,9 +394,11 @@ do {									\
 #define __put_user_nocheck_4 __put_user_asm_word
 #define __put_user_nocheck_8 __put_user_asm_dword
 
+#endif /* !CONFIG_CPU_SPECTRE */
+
 #define __put_user_asm(x, __pu_addr, err, instr)		\
 	__asm__ __volatile__(					\
-	"1:	" TUSER(instr) " %1, [%2], #0\n"		\
+	"1:	" instr " %1, [%2], #0\n"		\
 	"2:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -450,36 +413,36 @@ do {									\
 	: "r" (x), "r" (__pu_addr), "i" (-EFAULT)		\
 	: "cc")
 
-#define __put_user_asm_byte(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, strb)
+#define __put_user_asm_byte(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "strb" __t)
 
 #if __LINUX_ARM_ARCH__ >= 6
 
-#define __put_user_asm_half(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, strh)
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "strh" __t)
 
 #else
 
 #ifndef __ARMEB__
-#define __put_user_asm_half(x, __pu_addr, err)			\
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
 ({								\
 	unsigned long __temp = (__force unsigned long)(x);	\
-	__put_user_asm_byte(__temp, __pu_addr, err);		\
-	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err);	\
+	__put_user_asm_byte(__temp, __pu_addr, err, __t);	\
+	__put_user_asm_byte(__temp >> 8, __pu_addr + 1, err, __t);\
 })
 #else
-#define __put_user_asm_half(x, __pu_addr, err)			\
+#define __put_user_asm_half(x, __pu_addr, err, __t)		\
 ({								\
 	unsigned long __temp = (__force unsigned long)(x);	\
-	__put_user_asm_byte(__temp >> 8, __pu_addr, err);	\
-	__put_user_asm_byte(__temp, __pu_addr + 1, err);	\
+	__put_user_asm_byte(__temp >> 8, __pu_addr, err, __t);	\
+	__put_user_asm_byte(__temp, __pu_addr + 1, err, __t);	\
 })
 #endif
 
 #endif /* __LINUX_ARM_ARCH__ >= 6 */
 
-#define __put_user_asm_word(x, __pu_addr, err)			\
-	__put_user_asm(x, __pu_addr, err, str)
+#define __put_user_asm_word(x, __pu_addr, err, __t)		\
+	__put_user_asm(x, __pu_addr, err, "str" __t)
 
 #ifndef __ARMEB__
 #define	__reg_oper0	"%R2"
@@ -489,12 +452,12 @@ do {									\
 #define	__reg_oper1	"%R2"
 #endif
 
-#define __put_user_asm_dword(x, __pu_addr, err)			\
+#define __put_user_asm_dword(x, __pu_addr, err, __t)		\
 	__asm__ __volatile__(					\
- ARM(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1], #4\n"	) \
- ARM(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1]\n"	) \
- THUMB(	"1:	" TUSER(str) "	" __reg_oper1 ", [%1]\n"	) \
- THUMB(	"2:	" TUSER(str) "	" __reg_oper0 ", [%1, #4]\n"	) \
+ ARM(	"1:	str" __t "	" __reg_oper1 ", [%1], #4\n"  ) \
+ ARM(	"2:	str" __t "	" __reg_oper0 ", [%1]\n"      ) \
+ THUMB(	"1:	str" __t "	" __reg_oper1 ", [%1]\n"      ) \
+ THUMB(	"2:	str" __t "	" __reg_oper0 ", [%1, #4]\n"  ) \
 	"3:\n"							\
 	"	.pushsection .text.fixup,\"ax\"\n"		\
 	"	.align	2\n"					\
@@ -510,7 +473,49 @@ do {									\
 	: "r" (x), "i" (-EFAULT)				\
 	: "cc")
 
-#endif /* !CONFIG_CPU_SPECTRE */
+#define HAVE_GET_KERNEL_NOFAULT
+
+#define __get_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	const type *__pk_ptr = (src);					\
+	unsigned long __src = (unsigned long)(__pk_ptr);		\
+	type __val;							\
+	int __err = 0;							\
+	switch (sizeof(type)) {						\
+	case 1:	__get_user_asm_byte(__val, __src, __err, ""); break;	\
+	case 2: __get_user_asm_half(__val, __src, __err, ""); break;	\
+	case 4: __get_user_asm_word(__val, __src, __err, ""); break;	\
+	case 8: {							\
+		u32 *__v32 = (u32*)&__val;				\
+		__get_user_asm_word(__v32[0], __src, __err, "");	\
+		if (__err)						\
+			break;						\
+		__get_user_asm_word(__v32[1], __src+4, __err, "");	\
+		break;							\
+	}								\
+	default: __err = __get_user_bad(); break;			\
+	}								\
+	*(type *)(dst) = __val;						\
+	if (__err)							\
+		goto err_label;						\
+} while (0)
+
+#define __put_kernel_nofault(dst, src, type, err_label)			\
+do {									\
+	const type *__pk_ptr = (dst);					\
+	unsigned long __dst = (unsigned long)__pk_ptr;			\
+	int __err = 0;							\
+	type __val = *(type *)src;					\
+	switch (sizeof(type)) {						\
+	case 1: __put_user_asm_byte(__val, __dst, __err, ""); break;	\
+	case 2:	__put_user_asm_half(__val, __dst, __err, ""); break;	\
+	case 4:	__put_user_asm_word(__val, __dst, __err, ""); break;	\
+	case 8:	__put_user_asm_dword(__val, __dst, __err, ""); break;	\
+	default: __err = __put_user_bad(); break;			\
+	}								\
+	if (__err)							\
+		goto err_label;						\
+} while (0)
 
 #ifdef CONFIG_MMU
 extern unsigned long __must_check
diff --git a/arch/arm/include/asm/unified.h b/arch/arm/include/asm/unified.h
index 1e2c3eb04353..ce9689118dbb 100644
--- a/arch/arm/include/asm/unified.h
+++ b/arch/arm/include/asm/unified.h
@@ -24,10 +24,6 @@ __asm__(".syntax unified");
 
 #ifdef CONFIG_THUMB2_KERNEL
 
-#if __GNUC__ < 4
-#error Thumb-2 kernel requires gcc >= 4
-#endif
-
 /* The CPSR bit describing the instruction set (Thumb) */
 #define PSR_ISETSTATE	PSR_T_BIT
 
diff --git a/arch/arm/include/uapi/asm/unistd.h b/arch/arm/include/uapi/asm/unistd.h
index ae7749e15726..a1149911464c 100644
--- a/arch/arm/include/uapi/asm/unistd.h
+++ b/arch/arm/include/uapi/asm/unistd.h
@@ -15,6 +15,7 @@
 #define _UAPI__ASM_ARM_UNISTD_H
 
 #define __NR_OABI_SYSCALL_BASE	0x900000
+#define __NR_SYSCALL_MASK	0x0fffff
 
 #if defined(__thumb__) || defined(__ARM_EABI__)
 #define __NR_SYSCALL_BASE	0
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 64944701bf6a..a646a3f6440f 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -43,11 +43,11 @@ int main(void)
   BLANK();
   DEFINE(TI_FLAGS,		offsetof(struct thread_info, flags));
   DEFINE(TI_PREEMPT,		offsetof(struct thread_info, preempt_count));
-  DEFINE(TI_ADDR_LIMIT,		offsetof(struct thread_info, addr_limit));
   DEFINE(TI_TASK,		offsetof(struct thread_info, task));
   DEFINE(TI_CPU,		offsetof(struct thread_info, cpu));
   DEFINE(TI_CPU_DOMAIN,		offsetof(struct thread_info, cpu_domain));
   DEFINE(TI_CPU_SAVE,		offsetof(struct thread_info, cpu_context));
+  DEFINE(TI_ABI_SYSCALL,	offsetof(struct thread_info, abi_syscall));
   DEFINE(TI_USED_CP,		offsetof(struct thread_info, used_cp));
   DEFINE(TI_TP_VALUE,		offsetof(struct thread_info, tp_value));
   DEFINE(TI_FPSTATE,		offsetof(struct thread_info, fpstate));
@@ -88,7 +88,6 @@ int main(void)
   DEFINE(S_OLD_R0,		offsetof(struct pt_regs, ARM_ORIG_r0));
   DEFINE(PT_REGS_SIZE,		sizeof(struct pt_regs));
   DEFINE(SVC_DACR,		offsetof(struct svc_pt_regs, dacr));
-  DEFINE(SVC_ADDR_LIMIT,	offsetof(struct svc_pt_regs, addr_limit));
   DEFINE(SVC_REGS_SIZE,		sizeof(struct svc_pt_regs));
   BLANK();
   DEFINE(SIGFRAME_RC3_OFFSET,	offsetof(struct sigframe, retcode[3]));
diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S
index 7f0b7aba1498..d9c99db50243 100644
--- a/arch/arm/kernel/entry-common.S
+++ b/arch/arm/kernel/entry-common.S
@@ -49,10 +49,6 @@ __ret_fast_syscall:
  UNWIND(.fnstart	)
  UNWIND(.cantunwind	)
 	disable_irq_notrace			@ disable interrupts
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr	r1, =TASK_SIZE
-	cmp	r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	movs	r1, r1, lsl #16
 	bne	fast_work_pending
@@ -87,10 +83,6 @@ __ret_fast_syscall:
 	bl	do_rseq_syscall
 #endif
 	disable_irq_notrace			@ disable interrupts
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr     r1, =TASK_SIZE
-	cmp     r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]		@ re-check for syscall tracing
 	movs	r1, r1, lsl #16
 	beq	no_work_pending
@@ -129,10 +121,6 @@ ret_slow_syscall:
 #endif
 	disable_irq_notrace			@ disable interrupts
 ENTRY(ret_to_user_from_irq)
-	ldr	r2, [tsk, #TI_ADDR_LIMIT]
-	ldr     r1, =TASK_SIZE
-	cmp	r2, r1
-	blne	addr_limit_check_failed
 	ldr	r1, [tsk, #TI_FLAGS]
 	movs	r1, r1, lsl #16
 	bne	slow_work_pending
@@ -226,6 +214,7 @@ ENTRY(vector_swi)
 	/* saved_psr and saved_pc are now dead */
 
 	uaccess_disable tbl
+	get_thread_info tsk
 
 	adr	tbl, sys_call_table		@ load syscall table pointer
 
@@ -237,13 +226,17 @@ ENTRY(vector_swi)
 	 * get the old ABI syscall table address.
 	 */
 	bics	r10, r10, #0xff000000
+	strne	r10, [tsk, #TI_ABI_SYSCALL]
+	streq	scno, [tsk, #TI_ABI_SYSCALL]
 	eorne	scno, r10, #__NR_OABI_SYSCALL_BASE
 	ldrne	tbl, =sys_oabi_call_table
 #elif !defined(CONFIG_AEABI)
 	bic	scno, scno, #0xff000000		@ mask off SWI op-code
+	str	scno, [tsk, #TI_ABI_SYSCALL]
 	eor	scno, scno, #__NR_SYSCALL_BASE	@ check OS number
+#else
+	str	scno, [tsk, #TI_ABI_SYSCALL]
 #endif
-	get_thread_info tsk
 	/*
 	 * Reload the registers that may have been corrupted on entry to
 	 * the syscall assembly (by tracing or context tracking.)
@@ -288,7 +281,6 @@ ENDPROC(vector_swi)
 	 * context switches, and waiting for our parent to respond.
 	 */
 __sys_trace:
-	mov	r1, scno
 	add	r0, sp, #S_OFF
 	bl	syscall_trace_enter
 	mov	scno, r0
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index bb5ad8a6a4c3..0e2d3051741e 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -106,7 +106,7 @@ void __show_regs(struct pt_regs *regs)
 	unsigned long flags;
 	char buf[64];
 #ifndef CONFIG_CPU_V7M
-	unsigned int domain, fs;
+	unsigned int domain;
 #ifdef CONFIG_CPU_SW_DOMAIN_PAN
 	/*
 	 * Get the domain register for the parent context. In user
@@ -115,14 +115,11 @@ void __show_regs(struct pt_regs *regs)
 	 */
 	if (user_mode(regs)) {
 		domain = DACR_UACCESS_ENABLE;
-		fs = get_fs();
 	} else {
 		domain = to_svc_pt_regs(regs)->dacr;
-		fs = to_svc_pt_regs(regs)->addr_limit;
 	}
 #else
 	domain = get_domain();
-	fs = get_fs();
 #endif
 #endif
 
@@ -158,8 +155,6 @@ void __show_regs(struct pt_regs *regs)
 		if ((domain & domain_mask(DOMAIN_USER)) ==
 		    domain_val(DOMAIN_USER, DOMAIN_NOACCESS))
 			segment = "none";
-		else if (fs == KERNEL_DS)
-			segment = "kernel";
 		else
 			segment = "user";
 
diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c
index b008859680bc..43b963ea4a0e 100644
--- a/arch/arm/kernel/ptrace.c
+++ b/arch/arm/kernel/ptrace.c
@@ -25,6 +25,7 @@
 #include <linux/tracehook.h>
 #include <linux/unistd.h>
 
+#include <asm/syscall.h>
 #include <asm/traps.h>
 
 #define CREATE_TRACE_POINTS
@@ -785,7 +786,8 @@ long arch_ptrace(struct task_struct *child, long request,
 			break;
 
 		case PTRACE_SET_SYSCALL:
-			task_thread_info(child)->syscall = data;
+			task_thread_info(child)->abi_syscall = data &
+							__NR_SYSCALL_MASK;
 			ret = 0;
 			break;
 
@@ -844,14 +846,14 @@ static void tracehook_report_syscall(struct pt_regs *regs,
 	if (dir == PTRACE_SYSCALL_EXIT)
 		tracehook_report_syscall_exit(regs, 0);
 	else if (tracehook_report_syscall_entry(regs))
-		current_thread_info()->syscall = -1;
+		current_thread_info()->abi_syscall = -1;
 
 	regs->ARM_ip = ip;
 }
 
-asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
+asmlinkage int syscall_trace_enter(struct pt_regs *regs)
 {
-	current_thread_info()->syscall = scno;
+	int scno;
 
 	if (test_thread_flag(TIF_SYSCALL_TRACE))
 		tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
@@ -862,11 +864,11 @@ asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno)
 		return -1;
 #else
 	/* XXX: remove this once OABI gets fixed */
-	secure_computing_strict(current_thread_info()->syscall);
+	secure_computing_strict(syscall_get_nr(current, regs));
 #endif
 
 	/* Tracer or seccomp may have changed syscall. */
-	scno = current_thread_info()->syscall;
+	scno = syscall_get_nr(current, regs);
 
 	if (test_thread_flag(TIF_SYSCALL_TRACEPOINT))
 		trace_sys_enter(regs, scno);
diff --git a/arch/arm/kernel/signal.c b/arch/arm/kernel/signal.c
index 4e0dcff3f5b0..d0a800be0486 100644
--- a/arch/arm/kernel/signal.c
+++ b/arch/arm/kernel/signal.c
@@ -669,14 +669,6 @@ struct page *get_signal_page(void)
 	return page;
 }
 
-/* Defer to generic check */
-asmlinkage void addr_limit_check_failed(void)
-{
-#ifdef CONFIG_MMU
-	addr_limit_user_check();
-#endif
-}
-
 #ifdef CONFIG_DEBUG_RSEQ
 asmlinkage void do_rseq_syscall(struct pt_regs *regs)
 {
diff --git a/arch/arm/kernel/sys_oabi-compat.c b/arch/arm/kernel/sys_oabi-compat.c
index 075a2e0ed2c1..68112c172025 100644
--- a/arch/arm/kernel/sys_oabi-compat.c
+++ b/arch/arm/kernel/sys_oabi-compat.c
@@ -80,9 +80,12 @@
 #include <linux/socket.h>
 #include <linux/net.h>
 #include <linux/ipc.h>
+#include <linux/ipc_namespace.h>
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
+#include <asm/syscall.h>
+
 struct oldabi_stat64 {
 	unsigned long long st_dev;
 	unsigned int	__pad1;
@@ -191,60 +194,87 @@ struct oabi_flock64 {
 	pid_t	l_pid;
 } __attribute__ ((packed,aligned(4)));
 
-static long do_locks(unsigned int fd, unsigned int cmd,
-				 unsigned long arg)
+static int get_oabi_flock(struct flock64 *kernel, struct oabi_flock64 __user *arg)
 {
-	struct flock64 kernel;
 	struct oabi_flock64 user;
-	mm_segment_t fs;
-	long ret;
 
 	if (copy_from_user(&user, (struct oabi_flock64 __user *)arg,
 			   sizeof(user)))
 		return -EFAULT;
-	kernel.l_type	= user.l_type;
-	kernel.l_whence	= user.l_whence;
-	kernel.l_start	= user.l_start;
-	kernel.l_len	= user.l_len;
-	kernel.l_pid	= user.l_pid;
-
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_fcntl64(fd, cmd, (unsigned long)&kernel);
-	set_fs(fs);
-
-	if (!ret && (cmd == F_GETLK64 || cmd == F_OFD_GETLK)) {
-		user.l_type	= kernel.l_type;
-		user.l_whence	= kernel.l_whence;
-		user.l_start	= kernel.l_start;
-		user.l_len	= kernel.l_len;
-		user.l_pid	= kernel.l_pid;
-		if (copy_to_user((struct oabi_flock64 __user *)arg,
-				 &user, sizeof(user)))
-			ret = -EFAULT;
-	}
-	return ret;
+
+	kernel->l_type	 = user.l_type;
+	kernel->l_whence = user.l_whence;
+	kernel->l_start	 = user.l_start;
+	kernel->l_len	 = user.l_len;
+	kernel->l_pid	 = user.l_pid;
+
+	return 0;
+}
+
+static int put_oabi_flock(struct flock64 *kernel, struct oabi_flock64 __user *arg)
+{
+	struct oabi_flock64 user;
+
+	user.l_type	= kernel->l_type;
+	user.l_whence	= kernel->l_whence;
+	user.l_start	= kernel->l_start;
+	user.l_len	= kernel->l_len;
+	user.l_pid	= kernel->l_pid;
+
+	if (copy_to_user((struct oabi_flock64 __user *)arg,
+			 &user, sizeof(user)))
+		return -EFAULT;
+
+	return 0;
 }
 
 asmlinkage long sys_oabi_fcntl64(unsigned int fd, unsigned int cmd,
 				 unsigned long arg)
 {
+	void __user *argp = (void __user *)arg;
+	struct fd f = fdget_raw(fd);
+	struct flock64 flock;
+	long err = -EBADF;
+
+	if (!f.file)
+		goto out;
+
 	switch (cmd) {
-	case F_OFD_GETLK:
-	case F_OFD_SETLK:
-	case F_OFD_SETLKW:
 	case F_GETLK64:
+	case F_OFD_GETLK:
+		err = security_file_fcntl(f.file, cmd, arg);
+		if (err)
+			break;
+		err = get_oabi_flock(&flock, argp);
+		if (err)
+			break;
+		err = fcntl_getlk64(f.file, cmd, &flock);
+		if (!err)
+		       err = put_oabi_flock(&flock, argp);
+		break;
 	case F_SETLK64:
 	case F_SETLKW64:
-		return do_locks(fd, cmd, arg);
-
+	case F_OFD_SETLK:
+	case F_OFD_SETLKW:
+		err = security_file_fcntl(f.file, cmd, arg);
+		if (err)
+			break;
+		err = get_oabi_flock(&flock, argp);
+		if (err)
+			break;
+		err = fcntl_setlk64(fd, f.file, cmd, &flock);
+		break;
 	default:
-		return sys_fcntl64(fd, cmd, arg);
+		err = sys_fcntl64(fd, cmd, arg);
+		break;
 	}
+	fdput(f);
+out:
+	return err;
 }
 
 struct oabi_epoll_event {
-	__u32 events;
+	__poll_t events;
 	__u64 data;
 } __attribute__ ((packed,aligned(4)));
 
@@ -264,55 +294,34 @@ asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 
 	return do_epoll_ctl(epfd, op, fd, &kernel, false);
 }
-
-asmlinkage long sys_oabi_epoll_wait(int epfd,
-				    struct oabi_epoll_event __user *events,
-				    int maxevents, int timeout)
-{
-	struct epoll_event *kbuf;
-	struct oabi_epoll_event e;
-	mm_segment_t fs;
-	long ret, err, i;
-
-	if (maxevents <= 0 ||
-			maxevents > (INT_MAX/sizeof(*kbuf)) ||
-			maxevents > (INT_MAX/sizeof(*events)))
-		return -EINVAL;
-	if (!access_ok(events, sizeof(*events) * maxevents))
-		return -EFAULT;
-	kbuf = kmalloc_array(maxevents, sizeof(*kbuf), GFP_KERNEL);
-	if (!kbuf)
-		return -ENOMEM;
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-	ret = sys_epoll_wait(epfd, kbuf, maxevents, timeout);
-	set_fs(fs);
-	err = 0;
-	for (i = 0; i < ret; i++) {
-		e.events = kbuf[i].events;
-		e.data = kbuf[i].data;
-		err = __copy_to_user(events, &e, sizeof(e));
-		if (err)
-			break;
-		events++;
-	}
-	kfree(kbuf);
-	return err ? -EFAULT : ret;
-}
 #else
 asmlinkage long sys_oabi_epoll_ctl(int epfd, int op, int fd,
 				   struct oabi_epoll_event __user *event)
 {
 	return -EINVAL;
 }
+#endif
 
-asmlinkage long sys_oabi_epoll_wait(int epfd,
-				    struct oabi_epoll_event __user *events,
-				    int maxevents, int timeout)
+struct epoll_event __user *
+epoll_put_uevent(__poll_t revents, __u64 data,
+		 struct epoll_event __user *uevent)
 {
-	return -EINVAL;
+	if (in_oabi_syscall()) {
+		struct oabi_epoll_event __user *oevent = (void __user *)uevent;
+
+		if (__put_user(revents, &oevent->events) ||
+		    __put_user(data, &oevent->data))
+			return NULL;
+
+		return (void __user *)(oevent+1);
+	}
+
+	if (__put_user(revents, &uevent->events) ||
+	    __put_user(data, &uevent->data))
+		return NULL;
+
+	return uevent+1;
 }
-#endif
 
 struct oabi_sembuf {
 	unsigned short	sem_num;
@@ -321,46 +330,52 @@ struct oabi_sembuf {
 	unsigned short	__pad;
 };
 
+#define sc_semopm     sem_ctls[2]
+
+#ifdef CONFIG_SYSVIPC
 asmlinkage long sys_oabi_semtimedop(int semid,
 				    struct oabi_sembuf __user *tsops,
 				    unsigned nsops,
 				    const struct old_timespec32 __user *timeout)
 {
+	struct ipc_namespace *ns;
 	struct sembuf *sops;
-	struct old_timespec32 local_timeout;
 	long err;
 	int i;
 
+	ns = current->nsproxy->ipc_ns;
+	if (nsops > ns->sc_semopm)
+		return -E2BIG;
 	if (nsops < 1 || nsops > SEMOPM)
 		return -EINVAL;
-	if (!access_ok(tsops, sizeof(*tsops) * nsops))
-		return -EFAULT;
-	sops = kmalloc_array(nsops, sizeof(*sops), GFP_KERNEL);
+	sops = kvmalloc_array(nsops, sizeof(*sops), GFP_KERNEL);
 	if (!sops)
 		return -ENOMEM;
 	err = 0;
 	for (i = 0; i < nsops; i++) {
 		struct oabi_sembuf osb;
-		err |= __copy_from_user(&osb, tsops, sizeof(osb));
+		err |= copy_from_user(&osb, tsops, sizeof(osb));
 		sops[i].sem_num = osb.sem_num;
 		sops[i].sem_op = osb.sem_op;
 		sops[i].sem_flg = osb.sem_flg;
 		tsops++;
 	}
-	if (timeout) {
-		/* copy this as well before changing domain protection */
-		err |= copy_from_user(&local_timeout, timeout, sizeof(*timeout));
-		timeout = &local_timeout;
-	}
 	if (err) {
 		err = -EFAULT;
-	} else {
-		mm_segment_t fs = get_fs();
-		set_fs(KERNEL_DS);
-		err = sys_semtimedop_time32(semid, sops, nsops, timeout);
-		set_fs(fs);
+		goto out;
 	}
-	kfree(sops);
+
+	if (timeout) {
+		struct timespec64 ts;
+		err = get_old_timespec32(&ts, timeout);
+		if (err)
+			goto out;
+		err = __do_semtimedop(semid, sops, nsops, &ts, ns);
+		goto out;
+	}
+	err = __do_semtimedop(semid, sops, nsops, NULL, ns);
+out:
+	kvfree(sops);
 	return err;
 }
 
@@ -387,6 +402,27 @@ asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
 		return sys_ipc(call, first, second, third, ptr, fifth);
 	}
 }
+#else
+asmlinkage long sys_oabi_semtimedop(int semid,
+				    struct oabi_sembuf __user *tsops,
+				    unsigned nsops,
+				    const struct old_timespec32 __user *timeout)
+{
+	return -ENOSYS;
+}
+
+asmlinkage long sys_oabi_semop(int semid, struct oabi_sembuf __user *tsops,
+			       unsigned nsops)
+{
+	return -ENOSYS;
+}
+
+asmlinkage int sys_oabi_ipc(uint call, int first, int second, int third,
+			    void __user *ptr, long fifth)
+{
+	return -ENOSYS;
+}
+#endif
 
 asmlinkage long sys_oabi_bind(int fd, struct sockaddr __user *addr, int addrlen)
 {
diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c
index 64308e3a5d0c..4a7edc6e848f 100644
--- a/arch/arm/kernel/traps.c
+++ b/arch/arm/kernel/traps.c
@@ -122,17 +122,8 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		     unsigned long top)
 {
 	unsigned long first;
-	mm_segment_t fs;
 	int i;
 
-	/*
-	 * We need to switch to kernel mode so that we can use __get_user
-	 * to safely read from kernel space.  Note that we now dump the
-	 * code first, just in case the backtrace kills us.
-	 */
-	fs = get_fs();
-	set_fs(KERNEL_DS);
-
 	printk("%s%s(0x%08lx to 0x%08lx)\n", lvl, str, bottom, top);
 
 	for (first = bottom & ~31; first < top; first += 32) {
@@ -145,7 +136,7 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		for (p = first, i = 0; i < 8 && p < top; i++, p += 4) {
 			if (p >= bottom && p < top) {
 				unsigned long val;
-				if (__get_user(val, (unsigned long *)p) == 0)
+				if (get_kernel_nofault(val, (unsigned long *)p))
 					sprintf(str + i * 9, " %08lx", val);
 				else
 					sprintf(str + i * 9, " ????????");
@@ -153,11 +144,9 @@ static void dump_mem(const char *lvl, const char *str, unsigned long bottom,
 		}
 		printk("%s%04lx:%s\n", lvl, first & 0xffff, str);
 	}
-
-	set_fs(fs);
 }
 
-static void __dump_instr(const char *lvl, struct pt_regs *regs)
+static void dump_instr(const char *lvl, struct pt_regs *regs)
 {
 	unsigned long addr = instruction_pointer(regs);
 	const int thumb = thumb_mode(regs);
@@ -173,10 +162,20 @@ static void __dump_instr(const char *lvl, struct pt_regs *regs)
 	for (i = -4; i < 1 + !!thumb; i++) {
 		unsigned int val, bad;
 
-		if (thumb)
-			bad = get_user(val, &((u16 *)addr)[i]);
-		else
-			bad = get_user(val, &((u32 *)addr)[i]);
+		if (!user_mode(regs)) {
+			if (thumb) {
+				u16 val16;
+				bad = get_kernel_nofault(val16, &((u16 *)addr)[i]);
+				val = val16;
+			} else {
+				bad = get_kernel_nofault(val, &((u32 *)addr)[i]);
+			}
+		} else {
+			if (thumb)
+				bad = get_user(val, &((u16 *)addr)[i]);
+			else
+				bad = get_user(val, &((u32 *)addr)[i]);
+		}
 
 		if (!bad)
 			p += sprintf(p, i == 0 ? "(%0*x) " : "%0*x ",
@@ -189,20 +188,6 @@ static void __dump_instr(const char *lvl, struct pt_regs *regs)
 	printk("%sCode: %s\n", lvl, str);
 }
 
-static void dump_instr(const char *lvl, struct pt_regs *regs)
-{
-	mm_segment_t fs;
-
-	if (!user_mode(regs)) {
-		fs = get_fs();
-		set_fs(KERNEL_DS);
-		__dump_instr(lvl, regs);
-		set_fs(fs);
-	} else {
-		__dump_instr(lvl, regs);
-	}
-}
-
 #ifdef CONFIG_ARM_UNWIND
 static inline void dump_backtrace(struct pt_regs *regs, struct task_struct *tsk,
 				  const char *loglvl)
@@ -781,11 +766,6 @@ void abort(void)
 	panic("Oops failed to kill thread");
 }
 
-void __init trap_init(void)
-{
-	return;
-}
-
 #ifdef CONFIG_KUSER_HELPERS
 static void __init kuser_init(void *vectors)
 {
diff --git a/arch/arm/lib/copy_from_user.S b/arch/arm/lib/copy_from_user.S
index f8016e3db65d..480a20766137 100644
--- a/arch/arm/lib/copy_from_user.S
+++ b/arch/arm/lib/copy_from_user.S
@@ -109,8 +109,7 @@
 
 ENTRY(arm_copy_from_user)
 #ifdef CONFIG_CPU_SPECTRE
-	get_thread_info r3
-	ldr	r3, [r3, #TI_ADDR_LIMIT]
+	ldr	r3, =TASK_SIZE
 	uaccess_mask_range_ptr r1, r2, r3, ip
 #endif
 
diff --git a/arch/arm/lib/copy_to_user.S b/arch/arm/lib/copy_to_user.S
index ebfe4cb3d912..842ea5ede485 100644
--- a/arch/arm/lib/copy_to_user.S
+++ b/arch/arm/lib/copy_to_user.S
@@ -109,8 +109,7 @@
 ENTRY(__copy_to_user_std)
 WEAK(arm_copy_to_user)
 #ifdef CONFIG_CPU_SPECTRE
-	get_thread_info r3
-	ldr	r3, [r3, #TI_ADDR_LIMIT]
+	ldr	r3, =TASK_SIZE
 	uaccess_mask_range_ptr r0, r2, r3, ip
 #endif
 
diff --git a/arch/arm/tools/syscall.tbl b/arch/arm/tools/syscall.tbl
index 7e0a9b692d87..e842209e135d 100644
--- a/arch/arm/tools/syscall.tbl
+++ b/arch/arm/tools/syscall.tbl
@@ -266,7 +266,7 @@
 249	common	lookup_dcookie		sys_lookup_dcookie
 250	common	epoll_create		sys_epoll_create
 251	common	epoll_ctl		sys_epoll_ctl		sys_oabi_epoll_ctl
-252	common	epoll_wait		sys_epoll_wait		sys_oabi_epoll_wait
+252	common	epoll_wait		sys_epoll_wait
 253	common	remap_file_pages	sys_remap_file_pages
 # 254 for set_thread_area
 # 255 for get_thread_area
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index 9dc1720a909f..077f2ec4eeb2 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -220,6 +220,7 @@ config ARM64
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
 	select HAVE_ARCH_USERFAULTFD_MINOR if USERFAULTFD
+	select TRACE_IRQFLAGS_SUPPORT
 	help
 	  ARM 64-bit (AArch64) Linux support.
 
@@ -287,9 +288,6 @@ config ILLEGAL_POINTER_VALUE
 config LOCKDEP_SUPPORT
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config GENERIC_BUG
 	def_bool y
 	depends on BUG
diff --git a/arch/arm64/include/asm/compat.h b/arch/arm64/include/asm/compat.h
index 79c1a750e357..eaa6ca062d89 100644
--- a/arch/arm64/include/asm/compat.h
+++ b/arch/arm64/include/asm/compat.h
@@ -107,11 +107,6 @@ struct compat_statfs {
 #define compat_user_stack_pointer() (user_stack_pointer(task_pt_regs(current)))
 #define COMPAT_MINSIGSTKSZ	2048
 
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	return (void __user *)compat_user_stack_pointer() - len;
-}
-
 struct compat_ipc64_perm {
 	compat_key_t key;
 	__compat_uid32_t uid;
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index cdfa2a242e9f..ef6be92b1921 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -602,14 +602,14 @@ static inline bool id_aa64pfr0_32bit_el1(u64 pfr0)
 {
 	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL1_SHIFT);
 
-	return val == ID_AA64PFR0_EL1_32BIT_64BIT;
+	return val == ID_AA64PFR0_ELx_32BIT_64BIT;
 }
 
 static inline bool id_aa64pfr0_32bit_el0(u64 pfr0)
 {
 	u32 val = cpuid_feature_extract_unsigned_field(pfr0, ID_AA64PFR0_EL0_SHIFT);
 
-	return val == ID_AA64PFR0_EL0_32BIT_64BIT;
+	return val == ID_AA64PFR0_ELx_32BIT_64BIT;
 }
 
 static inline bool id_aa64pfr0_sve(u64 pfr0)
@@ -784,13 +784,13 @@ extern int do_emulate_mrs(struct pt_regs *regs, u32 sys_reg, u32 rt);
 static inline u32 id_aa64mmfr0_parange_to_phys_shift(int parange)
 {
 	switch (parange) {
-	case 0: return 32;
-	case 1: return 36;
-	case 2: return 40;
-	case 3: return 42;
-	case 4: return 44;
-	case 5: return 48;
-	case 6: return 52;
+	case ID_AA64MMFR0_PARANGE_32: return 32;
+	case ID_AA64MMFR0_PARANGE_36: return 36;
+	case ID_AA64MMFR0_PARANGE_40: return 40;
+	case ID_AA64MMFR0_PARANGE_42: return 42;
+	case ID_AA64MMFR0_PARANGE_44: return 44;
+	case ID_AA64MMFR0_PARANGE_48: return 48;
+	case ID_AA64MMFR0_PARANGE_52: return 52;
 	/*
 	 * A future PE could use a value unknown to the kernel.
 	 * However, by the "D10.1.4 Principles of the ID scheme
diff --git a/arch/arm64/include/asm/kvm_arm.h b/arch/arm64/include/asm/kvm_arm.h
index d436831dd706..327120c0089f 100644
--- a/arch/arm64/include/asm/kvm_arm.h
+++ b/arch/arm64/include/asm/kvm_arm.h
@@ -12,8 +12,13 @@
 #include <asm/types.h>
 
 /* Hyp Configuration Register (HCR) bits */
+
+#define HCR_TID5	(UL(1) << 58)
+#define HCR_DCT		(UL(1) << 57)
 #define HCR_ATA_SHIFT	56
 #define HCR_ATA		(UL(1) << HCR_ATA_SHIFT)
+#define HCR_AMVOFFEN	(UL(1) << 51)
+#define HCR_FIEN	(UL(1) << 47)
 #define HCR_FWB		(UL(1) << 46)
 #define HCR_API		(UL(1) << 41)
 #define HCR_APK		(UL(1) << 40)
@@ -32,9 +37,9 @@
 #define HCR_TVM		(UL(1) << 26)
 #define HCR_TTLB	(UL(1) << 25)
 #define HCR_TPU		(UL(1) << 24)
-#define HCR_TPC		(UL(1) << 23)
+#define HCR_TPC		(UL(1) << 23) /* HCR_TPCP if FEAT_DPB */
 #define HCR_TSW		(UL(1) << 22)
-#define HCR_TAC		(UL(1) << 21)
+#define HCR_TACR	(UL(1) << 21)
 #define HCR_TIDCP	(UL(1) << 20)
 #define HCR_TSC		(UL(1) << 19)
 #define HCR_TID3	(UL(1) << 18)
@@ -56,12 +61,13 @@
 #define HCR_PTW		(UL(1) << 2)
 #define HCR_SWIO	(UL(1) << 1)
 #define HCR_VM		(UL(1) << 0)
+#define HCR_RES0	((UL(1) << 48) | (UL(1) << 39))
 
 /*
  * The bits we set in HCR:
  * TLOR:	Trap LORegion register accesses
  * RW:		64bit by default, can be overridden for 32bit VMs
- * TAC:		Trap ACTLR
+ * TACR:	Trap ACTLR
  * TSC:		Trap SMC
  * TSW:		Trap cache operations by set/way
  * TWE:		Trap WFE
@@ -76,7 +82,7 @@
  * PTW:		Take a stage2 fault if a stage1 walk steps in device memory
  */
 #define HCR_GUEST_FLAGS (HCR_TSC | HCR_TSW | HCR_TWE | HCR_TWI | HCR_VM | \
-			 HCR_BSU_IS | HCR_FB | HCR_TAC | \
+			 HCR_BSU_IS | HCR_FB | HCR_TACR | \
 			 HCR_AMO | HCR_SWIO | HCR_TIDCP | HCR_RW | HCR_TLOR | \
 			 HCR_FMO | HCR_IMO | HCR_PTW )
 #define HCR_VIRT_EXCP_MASK (HCR_VSE | HCR_VI | HCR_VF)
@@ -275,24 +281,40 @@
 #define CPTR_EL2_TTA	(1 << 20)
 #define CPTR_EL2_TFP	(1 << CPTR_EL2_TFP_SHIFT)
 #define CPTR_EL2_TZ	(1 << 8)
-#define CPTR_EL2_RES1	0x000032ff /* known RES1 bits in CPTR_EL2 */
-#define CPTR_EL2_DEFAULT	CPTR_EL2_RES1
+#define CPTR_NVHE_EL2_RES1	0x000032ff /* known RES1 bits in CPTR_EL2 (nVHE) */
+#define CPTR_EL2_DEFAULT	CPTR_NVHE_EL2_RES1
+#define CPTR_NVHE_EL2_RES0	(GENMASK(63, 32) |	\
+				 GENMASK(29, 21) |	\
+				 GENMASK(19, 14) |	\
+				 BIT(11))
 
 /* Hyp Debug Configuration Register bits */
 #define MDCR_EL2_E2TB_MASK	(UL(0x3))
 #define MDCR_EL2_E2TB_SHIFT	(UL(24))
-#define MDCR_EL2_TTRF		(1 << 19)
-#define MDCR_EL2_TPMS		(1 << 14)
+#define MDCR_EL2_HPMFZS		(UL(1) << 36)
+#define MDCR_EL2_HPMFZO		(UL(1) << 29)
+#define MDCR_EL2_MTPME		(UL(1) << 28)
+#define MDCR_EL2_TDCC		(UL(1) << 27)
+#define MDCR_EL2_HCCD		(UL(1) << 23)
+#define MDCR_EL2_TTRF		(UL(1) << 19)
+#define MDCR_EL2_HPMD		(UL(1) << 17)
+#define MDCR_EL2_TPMS		(UL(1) << 14)
 #define MDCR_EL2_E2PB_MASK	(UL(0x3))
 #define MDCR_EL2_E2PB_SHIFT	(UL(12))
-#define MDCR_EL2_TDRA		(1 << 11)
-#define MDCR_EL2_TDOSA		(1 << 10)
-#define MDCR_EL2_TDA		(1 << 9)
-#define MDCR_EL2_TDE		(1 << 8)
-#define MDCR_EL2_HPME		(1 << 7)
-#define MDCR_EL2_TPM		(1 << 6)
-#define MDCR_EL2_TPMCR		(1 << 5)
-#define MDCR_EL2_HPMN_MASK	(0x1F)
+#define MDCR_EL2_TDRA		(UL(1) << 11)
+#define MDCR_EL2_TDOSA		(UL(1) << 10)
+#define MDCR_EL2_TDA		(UL(1) << 9)
+#define MDCR_EL2_TDE		(UL(1) << 8)
+#define MDCR_EL2_HPME		(UL(1) << 7)
+#define MDCR_EL2_TPM		(UL(1) << 6)
+#define MDCR_EL2_TPMCR		(UL(1) << 5)
+#define MDCR_EL2_HPMN_MASK	(UL(0x1F))
+#define MDCR_EL2_RES0		(GENMASK(63, 37) |	\
+				 GENMASK(35, 30) |	\
+				 GENMASK(25, 24) |	\
+				 GENMASK(22, 20) |	\
+				 BIT(18) |		\
+				 GENMASK(16, 15))
 
 /* For compatibility with fault code shared with 32-bit */
 #define FSC_FAULT	ESR_ELx_FSC_FAULT
diff --git a/arch/arm64/include/asm/kvm_asm.h b/arch/arm64/include/asm/kvm_asm.h
index 9f0bf2109be7..e86045ac43ba 100644
--- a/arch/arm64/include/asm/kvm_asm.h
+++ b/arch/arm64/include/asm/kvm_asm.h
@@ -59,12 +59,11 @@
 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_save_aprs		13
 #define __KVM_HOST_SMCCC_FUNC___vgic_v3_restore_aprs		14
 #define __KVM_HOST_SMCCC_FUNC___pkvm_init			15
-#define __KVM_HOST_SMCCC_FUNC___pkvm_create_mappings		16
+#define __KVM_HOST_SMCCC_FUNC___pkvm_host_share_hyp		16
 #define __KVM_HOST_SMCCC_FUNC___pkvm_create_private_mapping	17
 #define __KVM_HOST_SMCCC_FUNC___pkvm_cpu_set_vector		18
 #define __KVM_HOST_SMCCC_FUNC___pkvm_prot_finalize		19
-#define __KVM_HOST_SMCCC_FUNC___pkvm_mark_hyp			20
-#define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc			21
+#define __KVM_HOST_SMCCC_FUNC___kvm_adjust_pc			20
 
 #ifndef __ASSEMBLY__
 
@@ -210,7 +209,7 @@ extern u64 __vgic_v3_read_vmcr(void);
 extern void __vgic_v3_write_vmcr(u32 vmcr);
 extern void __vgic_v3_init_lrs(void);
 
-extern u32 __kvm_get_mdcr_el2(void);
+extern u64 __kvm_get_mdcr_el2(void);
 
 #define __KVM_EXTABLE(from, to)						\
 	"	.pushsection	__kvm_ex_table, \"a\"\n"		\
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 41911585ae0c..f8be56d5342b 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -66,7 +66,7 @@ DECLARE_STATIC_KEY_FALSE(userspace_irqchip_in_use);
 extern unsigned int kvm_sve_max_vl;
 int kvm_arm_init_sve(void);
 
-int __attribute_const__ kvm_target_cpu(void);
+u32 __attribute_const__ kvm_target_cpu(void);
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu);
 void kvm_arm_vcpu_destroy(struct kvm_vcpu *vcpu);
 
@@ -185,7 +185,6 @@ enum vcpu_sysreg {
 	PMCNTENSET_EL0,	/* Count Enable Set Register */
 	PMINTENSET_EL1,	/* Interrupt Enable Set Register */
 	PMOVSSET_EL0,	/* Overflow Flag Status Set Register */
-	PMSWINC_EL0,	/* Software Increment Register */
 	PMUSERENR_EL0,	/* User Enable Register */
 
 	/* Pointer Authentication Registers in a strict increasing order. */
@@ -287,9 +286,13 @@ struct kvm_vcpu_arch {
 	/* Stage 2 paging state used by the hardware on next switch */
 	struct kvm_s2_mmu *hw_mmu;
 
-	/* HYP configuration */
+	/* Values of trap registers for the guest. */
 	u64 hcr_el2;
-	u32 mdcr_el2;
+	u64 mdcr_el2;
+	u64 cptr_el2;
+
+	/* Values of trap registers for the host before guest entry. */
+	u64 mdcr_el2_host;
 
 	/* Exception Information */
 	struct kvm_vcpu_fault_info fault;
@@ -576,6 +579,7 @@ struct kvm_vcpu_stat {
 	u64 wfi_exit_stat;
 	u64 mmio_exit_user;
 	u64 mmio_exit_kernel;
+	u64 signal_exits;
 	u64 exits;
 };
 
@@ -771,6 +775,11 @@ void kvm_arch_free_vm(struct kvm *kvm);
 
 int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type);
 
+static inline bool kvm_vm_is_protected(struct kvm *kvm)
+{
+	return false;
+}
+
 int kvm_arm_vcpu_finalize(struct kvm_vcpu *vcpu, int feature);
 bool kvm_arm_vcpu_is_finalized(struct kvm_vcpu *vcpu);
 
diff --git a/arch/arm64/include/asm/kvm_hyp.h b/arch/arm64/include/asm/kvm_hyp.h
index 9d60b3006efc..657d0c94cf82 100644
--- a/arch/arm64/include/asm/kvm_hyp.h
+++ b/arch/arm64/include/asm/kvm_hyp.h
@@ -95,7 +95,7 @@ void __sve_restore_state(void *sve_pffr, u32 *fpsr);
 
 #ifndef __KVM_NVHE_HYPERVISOR__
 void activate_traps_vhe_load(struct kvm_vcpu *vcpu);
-void deactivate_traps_vhe_put(void);
+void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu);
 #endif
 
 u64 __guest_enter(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index b52c5c4b9a3d..02d378887743 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -252,6 +252,11 @@ static inline int kvm_write_guest_lock(struct kvm *kvm, gpa_t gpa,
 
 #define kvm_phys_to_vttbr(addr)		phys_to_ttbr(addr)
 
+/*
+ * When this is (directly or indirectly) used on the TLB invalidation
+ * path, we rely on a previously issued DSB so that page table updates
+ * and VMID reads are correctly ordered.
+ */
 static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu)
 {
 	struct kvm_vmid *vmid = &mmu->vmid;
@@ -259,7 +264,7 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu)
 	u64 cnp = system_supports_cnp() ? VTTBR_CNP_BIT : 0;
 
 	baddr = mmu->pgd_phys;
-	vmid_field = (u64)vmid->vmid << VTTBR_VMID_SHIFT;
+	vmid_field = (u64)READ_ONCE(vmid->vmid) << VTTBR_VMID_SHIFT;
 	return kvm_phys_to_vttbr(baddr) | vmid_field | cnp;
 }
 
@@ -267,9 +272,10 @@ static __always_inline u64 kvm_get_vttbr(struct kvm_s2_mmu *mmu)
  * Must be called from hyp code running at EL2 with an updated VTTBR
  * and interrupts disabled.
  */
-static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, unsigned long vtcr)
+static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu,
+					  struct kvm_arch *arch)
 {
-	write_sysreg(vtcr, vtcr_el2);
+	write_sysreg(arch->vtcr, vtcr_el2);
 	write_sysreg(kvm_get_vttbr(mmu), vttbr_el2);
 
 	/*
@@ -280,11 +286,6 @@ static __always_inline void __load_stage2(struct kvm_s2_mmu *mmu, unsigned long
 	asm(ALTERNATIVE("nop", "isb", ARM64_WORKAROUND_SPECULATIVE_AT));
 }
 
-static __always_inline void __load_guest_stage2(struct kvm_s2_mmu *mmu)
-{
-	__load_stage2(mmu, kern_hyp_va(mmu->arch)->vtcr);
-}
-
 static inline struct kvm *kvm_s2_mmu_to_kvm(struct kvm_s2_mmu *mmu)
 {
 	return container_of(mmu->arch, struct kvm, arch);
diff --git a/arch/arm64/include/asm/kvm_pgtable.h b/arch/arm64/include/asm/kvm_pgtable.h
index f004c0115d89..027783829584 100644
--- a/arch/arm64/include/asm/kvm_pgtable.h
+++ b/arch/arm64/include/asm/kvm_pgtable.h
@@ -25,6 +25,46 @@ static inline u64 kvm_get_parange(u64 mmfr0)
 
 typedef u64 kvm_pte_t;
 
+#define KVM_PTE_VALID			BIT(0)
+
+#define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
+#define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
+
+static inline bool kvm_pte_valid(kvm_pte_t pte)
+{
+	return pte & KVM_PTE_VALID;
+}
+
+static inline u64 kvm_pte_to_phys(kvm_pte_t pte)
+{
+	u64 pa = pte & KVM_PTE_ADDR_MASK;
+
+	if (PAGE_SHIFT == 16)
+		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
+
+	return pa;
+}
+
+static inline u64 kvm_granule_shift(u32 level)
+{
+	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
+	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
+}
+
+static inline u64 kvm_granule_size(u32 level)
+{
+	return BIT(kvm_granule_shift(level));
+}
+
+static inline bool kvm_level_supports_block_mapping(u32 level)
+{
+	/*
+	 * Reject invalid block mappings and don't bother with 4TB mappings for
+	 * 52-bit PAs.
+	 */
+	return !(level == 0 || (PAGE_SIZE != SZ_4K && level == 1));
+}
+
 /**
  * struct kvm_pgtable_mm_ops - Memory management callbacks.
  * @zalloc_page:		Allocate a single zeroed memory page.
@@ -76,30 +116,15 @@ enum kvm_pgtable_stage2_flags {
 };
 
 /**
- * struct kvm_pgtable - KVM page-table.
- * @ia_bits:		Maximum input address size, in bits.
- * @start_level:	Level at which the page-table walk starts.
- * @pgd:		Pointer to the first top-level entry of the page-table.
- * @mm_ops:		Memory management callbacks.
- * @mmu:		Stage-2 KVM MMU struct. Unused for stage-1 page-tables.
- */
-struct kvm_pgtable {
-	u32					ia_bits;
-	u32					start_level;
-	kvm_pte_t				*pgd;
-	struct kvm_pgtable_mm_ops		*mm_ops;
-
-	/* Stage-2 only */
-	struct kvm_s2_mmu			*mmu;
-	enum kvm_pgtable_stage2_flags		flags;
-};
-
-/**
  * enum kvm_pgtable_prot - Page-table permissions and attributes.
  * @KVM_PGTABLE_PROT_X:		Execute permission.
  * @KVM_PGTABLE_PROT_W:		Write permission.
  * @KVM_PGTABLE_PROT_R:		Read permission.
  * @KVM_PGTABLE_PROT_DEVICE:	Device attributes.
+ * @KVM_PGTABLE_PROT_SW0:	Software bit 0.
+ * @KVM_PGTABLE_PROT_SW1:	Software bit 1.
+ * @KVM_PGTABLE_PROT_SW2:	Software bit 2.
+ * @KVM_PGTABLE_PROT_SW3:	Software bit 3.
  */
 enum kvm_pgtable_prot {
 	KVM_PGTABLE_PROT_X			= BIT(0),
@@ -107,21 +132,48 @@ enum kvm_pgtable_prot {
 	KVM_PGTABLE_PROT_R			= BIT(2),
 
 	KVM_PGTABLE_PROT_DEVICE			= BIT(3),
+
+	KVM_PGTABLE_PROT_SW0			= BIT(55),
+	KVM_PGTABLE_PROT_SW1			= BIT(56),
+	KVM_PGTABLE_PROT_SW2			= BIT(57),
+	KVM_PGTABLE_PROT_SW3			= BIT(58),
 };
 
-#define PAGE_HYP		(KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W)
+#define KVM_PGTABLE_PROT_RW	(KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W)
+#define KVM_PGTABLE_PROT_RWX	(KVM_PGTABLE_PROT_RW | KVM_PGTABLE_PROT_X)
+
+#define PKVM_HOST_MEM_PROT	KVM_PGTABLE_PROT_RWX
+#define PKVM_HOST_MMIO_PROT	KVM_PGTABLE_PROT_RW
+
+#define PAGE_HYP		KVM_PGTABLE_PROT_RW
 #define PAGE_HYP_EXEC		(KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_X)
 #define PAGE_HYP_RO		(KVM_PGTABLE_PROT_R)
 #define PAGE_HYP_DEVICE		(PAGE_HYP | KVM_PGTABLE_PROT_DEVICE)
 
+typedef bool (*kvm_pgtable_force_pte_cb_t)(u64 addr, u64 end,
+					   enum kvm_pgtable_prot prot);
+
 /**
- * struct kvm_mem_range - Range of Intermediate Physical Addresses
- * @start:	Start of the range.
- * @end:	End of the range.
+ * struct kvm_pgtable - KVM page-table.
+ * @ia_bits:		Maximum input address size, in bits.
+ * @start_level:	Level at which the page-table walk starts.
+ * @pgd:		Pointer to the first top-level entry of the page-table.
+ * @mm_ops:		Memory management callbacks.
+ * @mmu:		Stage-2 KVM MMU struct. Unused for stage-1 page-tables.
+ * @flags:		Stage-2 page-table flags.
+ * @force_pte_cb:	Function that returns true if page level mappings must
+ *			be used instead of block mappings.
  */
-struct kvm_mem_range {
-	u64 start;
-	u64 end;
+struct kvm_pgtable {
+	u32					ia_bits;
+	u32					start_level;
+	kvm_pte_t				*pgd;
+	struct kvm_pgtable_mm_ops		*mm_ops;
+
+	/* Stage-2 only */
+	struct kvm_s2_mmu			*mmu;
+	enum kvm_pgtable_stage2_flags		flags;
+	kvm_pgtable_force_pte_cb_t		force_pte_cb;
 };
 
 /**
@@ -216,21 +268,24 @@ int kvm_pgtable_hyp_map(struct kvm_pgtable *pgt, u64 addr, u64 size, u64 phys,
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift);
 
 /**
- * kvm_pgtable_stage2_init_flags() - Initialise a guest stage-2 page-table.
+ * __kvm_pgtable_stage2_init() - Initialise a guest stage-2 page-table.
  * @pgt:	Uninitialised page-table structure to initialise.
  * @arch:	Arch-specific KVM structure representing the guest virtual
  *		machine.
  * @mm_ops:	Memory management callbacks.
  * @flags:	Stage-2 configuration flags.
+ * @force_pte_cb: Function that returns true if page level mappings must
+ *		be used instead of block mappings.
  *
  * Return: 0 on success, negative error code on failure.
  */
-int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch,
-				  struct kvm_pgtable_mm_ops *mm_ops,
-				  enum kvm_pgtable_stage2_flags flags);
+int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_arch *arch,
+			      struct kvm_pgtable_mm_ops *mm_ops,
+			      enum kvm_pgtable_stage2_flags flags,
+			      kvm_pgtable_force_pte_cb_t force_pte_cb);
 
 #define kvm_pgtable_stage2_init(pgt, arch, mm_ops) \
-	kvm_pgtable_stage2_init_flags(pgt, arch, mm_ops, 0)
+	__kvm_pgtable_stage2_init(pgt, arch, mm_ops, 0, NULL)
 
 /**
  * kvm_pgtable_stage2_destroy() - Destroy an unused guest stage-2 page-table.
@@ -374,7 +429,8 @@ kvm_pte_t kvm_pgtable_stage2_mkold(struct kvm_pgtable *pgt, u64 addr);
  * If there is a valid, leaf page-table entry used to translate @addr, then
  * relax the permissions in that entry according to the read, write and
  * execute permissions specified by @prot. No permissions are removed, and
- * TLB invalidation is performed after updating the entry.
+ * TLB invalidation is performed after updating the entry. Software bits cannot
+ * be set or cleared using kvm_pgtable_stage2_relax_perms().
  *
  * Return: 0 on success, negative error code on failure.
  */
@@ -433,22 +489,42 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
 		     struct kvm_pgtable_walker *walker);
 
 /**
- * kvm_pgtable_stage2_find_range() - Find a range of Intermediate Physical
- *				     Addresses with compatible permission
- *				     attributes.
- * @pgt:	Page-table structure initialised by kvm_pgtable_stage2_init*().
- * @addr:	Address that must be covered by the range.
- * @prot:	Protection attributes that the range must be compatible with.
- * @range:	Range structure used to limit the search space at call time and
- *		that will hold the result.
+ * kvm_pgtable_get_leaf() - Walk a page-table and retrieve the leaf entry
+ *			    with its level.
+ * @pgt:	Page-table structure initialised by kvm_pgtable_*_init()
+ *		or a similar initialiser.
+ * @addr:	Input address for the start of the walk.
+ * @ptep:	Pointer to storage for the retrieved PTE.
+ * @level:	Pointer to storage for the level of the retrieved PTE.
+ *
+ * The offset of @addr within a page is ignored.
  *
- * The offset of @addr within a page is ignored. An IPA is compatible with @prot
- * iff its corresponding stage-2 page-table entry has default ownership and, if
- * valid, is mapped with protection attributes identical to @prot.
+ * The walker will walk the page-table entries corresponding to the input
+ * address specified, retrieving the leaf corresponding to this address.
+ * Invalid entries are treated as leaf entries.
  *
  * Return: 0 on success, negative error code on failure.
  */
-int kvm_pgtable_stage2_find_range(struct kvm_pgtable *pgt, u64 addr,
-				  enum kvm_pgtable_prot prot,
-				  struct kvm_mem_range *range);
+int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
+			 kvm_pte_t *ptep, u32 *level);
+
+/**
+ * kvm_pgtable_stage2_pte_prot() - Retrieve the protection attributes of a
+ *				   stage-2 Page-Table Entry.
+ * @pte:	Page-table entry
+ *
+ * Return: protection attributes of the page-table entry in the enum
+ *	   kvm_pgtable_prot format.
+ */
+enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte);
+
+/**
+ * kvm_pgtable_hyp_pte_prot() - Retrieve the protection attributes of a stage-1
+ *				Page-Table Entry.
+ * @pte:	Page-table entry
+ *
+ * Return: protection attributes of the page-table entry in the enum
+ *	   kvm_pgtable_prot format.
+ */
+enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte);
 #endif	/* __ARM64_KVM_PGTABLE_H__ */
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index f2e06e7c0a31..b268082d67ed 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -784,14 +784,13 @@
 #define ID_AA64PFR0_AMU			0x1
 #define ID_AA64PFR0_SVE			0x1
 #define ID_AA64PFR0_RAS_V1		0x1
+#define ID_AA64PFR0_RAS_V1P1		0x2
 #define ID_AA64PFR0_FP_NI		0xf
 #define ID_AA64PFR0_FP_SUPPORTED	0x0
 #define ID_AA64PFR0_ASIMD_NI		0xf
 #define ID_AA64PFR0_ASIMD_SUPPORTED	0x0
-#define ID_AA64PFR0_EL1_64BIT_ONLY	0x1
-#define ID_AA64PFR0_EL1_32BIT_64BIT	0x2
-#define ID_AA64PFR0_EL0_64BIT_ONLY	0x1
-#define ID_AA64PFR0_EL0_32BIT_64BIT	0x2
+#define ID_AA64PFR0_ELx_64BIT_ONLY	0x1
+#define ID_AA64PFR0_ELx_32BIT_64BIT	0x2
 
 /* id_aa64pfr1 */
 #define ID_AA64PFR1_MPAMFRAC_SHIFT	16
@@ -847,6 +846,9 @@
 #define ID_AA64MMFR0_ASID_SHIFT		4
 #define ID_AA64MMFR0_PARANGE_SHIFT	0
 
+#define ID_AA64MMFR0_ASID_8		0x0
+#define ID_AA64MMFR0_ASID_16		0x2
+
 #define ID_AA64MMFR0_TGRAN4_NI			0xf
 #define ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN	0x0
 #define ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX	0x7
@@ -857,9 +859,16 @@
 #define ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN	0x1
 #define ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX	0xf
 
+#define ID_AA64MMFR0_PARANGE_32		0x0
+#define ID_AA64MMFR0_PARANGE_36		0x1
+#define ID_AA64MMFR0_PARANGE_40		0x2
+#define ID_AA64MMFR0_PARANGE_42		0x3
+#define ID_AA64MMFR0_PARANGE_44		0x4
 #define ID_AA64MMFR0_PARANGE_48		0x5
 #define ID_AA64MMFR0_PARANGE_52		0x6
 
+#define ARM64_MIN_PARANGE_BITS		32
+
 #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_DEFAULT	0x0
 #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE	0x1
 #define ID_AA64MMFR0_TGRAN_2_SUPPORTED_MIN	0x2
@@ -904,6 +913,7 @@
 #define ID_AA64MMFR2_CNP_SHIFT		0
 
 /* id_aa64dfr0 */
+#define ID_AA64DFR0_MTPMU_SHIFT		48
 #define ID_AA64DFR0_TRBE_SHIFT		44
 #define ID_AA64DFR0_TRACE_FILT_SHIFT	40
 #define ID_AA64DFR0_DOUBLELOCK_SHIFT	36
@@ -1034,14 +1044,17 @@
 #define ID_AA64MMFR0_TGRAN_SHIFT		ID_AA64MMFR0_TGRAN4_SHIFT
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_TGRAN4_SUPPORTED_MIN
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_TGRAN4_SUPPORTED_MAX
+#define ID_AA64MMFR0_TGRAN_2_SHIFT		ID_AA64MMFR0_TGRAN4_2_SHIFT
 #elif defined(CONFIG_ARM64_16K_PAGES)
 #define ID_AA64MMFR0_TGRAN_SHIFT		ID_AA64MMFR0_TGRAN16_SHIFT
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_TGRAN16_SUPPORTED_MIN
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_TGRAN16_SUPPORTED_MAX
+#define ID_AA64MMFR0_TGRAN_2_SHIFT		ID_AA64MMFR0_TGRAN16_2_SHIFT
 #elif defined(CONFIG_ARM64_64K_PAGES)
 #define ID_AA64MMFR0_TGRAN_SHIFT		ID_AA64MMFR0_TGRAN64_SHIFT
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MIN	ID_AA64MMFR0_TGRAN64_SUPPORTED_MIN
 #define ID_AA64MMFR0_TGRAN_SUPPORTED_MAX	ID_AA64MMFR0_TGRAN64_SUPPORTED_MAX
+#define ID_AA64MMFR0_TGRAN_2_SHIFT		ID_AA64MMFR0_TGRAN64_2_SHIFT
 #endif
 
 #define MVFR2_FPMISC_SHIFT		4
@@ -1172,6 +1185,11 @@
 #define ICH_VTR_A3V_SHIFT	21
 #define ICH_VTR_A3V_MASK	(1 << ICH_VTR_A3V_SHIFT)
 
+#define ARM64_FEATURE_FIELD_BITS	4
+
+/* Create a mask for the feature bits of the specified feature. */
+#define ARM64_FEATURE_MASK(x)	(GENMASK_ULL(x##_SHIFT + ARM64_FEATURE_FIELD_BITS - 1, x##_SHIFT))
+
 #ifdef __ASSEMBLY__
 
 	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index b5f08621fa29..190b494e22ab 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -430,17 +430,6 @@ extern unsigned long __must_check __arch_copy_to_user(void __user *to, const voi
 	__actu_ret;							\
 })
 
-extern unsigned long __must_check __arch_copy_in_user(void __user *to, const void __user *from, unsigned long n);
-#define raw_copy_in_user(to, from, n)					\
-({									\
-	unsigned long __aciu_ret;					\
-	uaccess_ttbr0_enable();						\
-	__aciu_ret = __arch_copy_in_user(__uaccess_mask_ptr(to),	\
-				    __uaccess_mask_ptr(from), (n));	\
-	uaccess_ttbr0_disable();					\
-	__aciu_ret;							\
-})
-
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h
index 4e99e4b912ef..844f6ae58662 100644
--- a/arch/arm64/include/asm/unistd32.h
+++ b/arch/arm64/include/asm/unistd32.h
@@ -649,11 +649,11 @@ __SYSCALL(__NR_inotify_add_watch, sys_inotify_add_watch)
 #define __NR_inotify_rm_watch 318
 __SYSCALL(__NR_inotify_rm_watch, sys_inotify_rm_watch)
 #define __NR_mbind 319
-__SYSCALL(__NR_mbind, compat_sys_mbind)
+__SYSCALL(__NR_mbind, sys_mbind)
 #define __NR_get_mempolicy 320
-__SYSCALL(__NR_get_mempolicy, compat_sys_get_mempolicy)
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
 #define __NR_set_mempolicy 321
-__SYSCALL(__NR_set_mempolicy, compat_sys_set_mempolicy)
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
 #define __NR_openat 322
 __SYSCALL(__NR_openat, compat_sys_openat)
 #define __NR_mkdirat 323
@@ -699,7 +699,7 @@ __SYSCALL(__NR_tee, sys_tee)
 #define __NR_vmsplice 343
 __SYSCALL(__NR_vmsplice, sys_vmsplice)
 #define __NR_move_pages 344
-__SYSCALL(__NR_move_pages, compat_sys_move_pages)
+__SYSCALL(__NR_move_pages, sys_move_pages)
 #define __NR_getcpu 345
 __SYSCALL(__NR_getcpu, sys_getcpu)
 #define __NR_epoll_pwait 346
@@ -811,7 +811,7 @@ __SYSCALL(__NR_rseq, sys_rseq)
 #define __NR_io_pgetevents 399
 __SYSCALL(__NR_io_pgetevents, compat_sys_io_pgetevents)
 #define __NR_migrate_pages 400
-__SYSCALL(__NR_migrate_pages, compat_sys_migrate_pages)
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
 #define __NR_kexec_file_load 401
 __SYSCALL(__NR_kexec_file_load, sys_kexec_file_load)
 /* 402 is unused */
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index b2770d753ba3..f8a3067d10c6 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -240,8 +240,8 @@ static const struct arm64_ftr_bits ftr_id_aa64pfr0[] = {
 	S_ARM64_FTR_BITS(FTR_VISIBLE, FTR_STRICT, FTR_LOWER_SAFE, ID_AA64PFR0_FP_SHIFT, 4, ID_AA64PFR0_FP_NI),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL3_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL2_SHIFT, 4, 0),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_EL1_64BIT_ONLY),
-	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_EL0_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL1_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY),
+	ARM64_FTR_BITS(FTR_HIDDEN, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64PFR0_EL0_SHIFT, 4, ID_AA64PFR0_ELx_64BIT_ONLY),
 	ARM64_FTR_END,
 };
 
@@ -1983,7 +1983,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_EL0_SHIFT,
-		.min_field_value = ID_AA64PFR0_EL0_32BIT_64BIT,
+		.min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT,
 	},
 #ifdef CONFIG_KVM
 	{
@@ -1994,7 +1994,7 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.sys_reg = SYS_ID_AA64PFR0_EL1,
 		.sign = FTR_UNSIGNED,
 		.field_pos = ID_AA64PFR0_EL1_SHIFT,
-		.min_field_value = ID_AA64PFR0_EL1_32BIT_64BIT,
+		.min_field_value = ID_AA64PFR0_ELx_32BIT_64BIT,
 	},
 	{
 		.desc = "Protected KVM",
diff --git a/arch/arm64/kernel/pci.c b/arch/arm64/kernel/pci.c
index 1006ed2d7c60..2276689b5411 100644
--- a/arch/arm64/kernel/pci.c
+++ b/arch/arm64/kernel/pci.c
@@ -82,14 +82,29 @@ int acpi_pci_bus_find_domain_nr(struct pci_bus *bus)
 
 int pcibios_root_bridge_prepare(struct pci_host_bridge *bridge)
 {
-	if (!acpi_disabled) {
-		struct pci_config_window *cfg = bridge->bus->sysdata;
-		struct acpi_device *adev = to_acpi_device(cfg->parent);
-		struct device *bus_dev = &bridge->bus->dev;
+	struct pci_config_window *cfg;
+	struct acpi_device *adev;
+	struct device *bus_dev;
 
-		ACPI_COMPANION_SET(&bridge->dev, adev);
-		set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
-	}
+	if (acpi_disabled)
+		return 0;
+
+	cfg = bridge->bus->sysdata;
+
+	/*
+	 * On Hyper-V there is no corresponding ACPI device for a root bridge,
+	 * therefore ->parent is set as NULL by the driver. And set 'adev' as
+	 * NULL in this case because there is no proper ACPI device.
+	 */
+	if (!cfg->parent)
+		adev = NULL;
+	else
+		adev = to_acpi_device(cfg->parent);
+
+	bus_dev = &bridge->bus->dev;
+
+	ACPI_COMPANION_SET(&bridge->dev, adev);
+	set_dev_node(bus_dev, acpi_get_node(acpi_device_handle(adev)));
 
 	return 0;
 }
diff --git a/arch/arm64/kernel/vmlinux.lds.S b/arch/arm64/kernel/vmlinux.lds.S
index 709d2c433c5e..f6b1a88245db 100644
--- a/arch/arm64/kernel/vmlinux.lds.S
+++ b/arch/arm64/kernel/vmlinux.lds.S
@@ -181,6 +181,8 @@ SECTIONS
 	/* everything from this point to __init_begin will be marked RO NX */
 	RO_DATA(PAGE_SIZE)
 
+	HYPERVISOR_DATA_SECTIONS
+
 	idmap_pg_dir = .;
 	. += IDMAP_DIR_SIZE;
 	idmap_pg_end = .;
@@ -260,8 +262,6 @@ SECTIONS
 	_sdata = .;
 	RW_DATA(L1_CACHE_BYTES, PAGE_SIZE, THREAD_ALIGN)
 
-	HYPERVISOR_DATA_SECTIONS
-
 	/*
 	 * Data written with the MMU off but read with the MMU on requires
 	 * cache lines to be invalidated, discarding up to a Cache Writeback
diff --git a/arch/arm64/kvm/Kconfig b/arch/arm64/kvm/Kconfig
index a4eba0908bfa..d7eec0b43744 100644
--- a/arch/arm64/kvm/Kconfig
+++ b/arch/arm64/kvm/Kconfig
@@ -26,6 +26,7 @@ menuconfig KVM
 	select HAVE_KVM_ARCH_TLB_FLUSH_ALL
 	select KVM_MMIO
 	select KVM_GENERIC_DIRTYLOG_READ_PROTECT
+	select KVM_XFER_TO_GUEST_WORK
 	select SRCU
 	select KVM_VFIO
 	select HAVE_KVM_EVENTFD
@@ -46,6 +47,15 @@ if KVM
 
 source "virt/kvm/Kconfig"
 
+config NVHE_EL2_DEBUG
+	bool "Debug mode for non-VHE EL2 object"
+	help
+	  Say Y here to enable the debug mode for the non-VHE KVM EL2 object.
+	  Failure reports will BUG() in the hypervisor. This is intended for
+	  local EL2 hypervisor development.
+
+	  If unsure, say N.
+
 endif # KVM
 
 endif # VIRTUALIZATION
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 0ca72f5cda41..fe102cd2e518 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -6,6 +6,7 @@
 
 #include <linux/bug.h>
 #include <linux/cpu_pm.h>
+#include <linux/entry-kvm.h>
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/kvm_host.h>
@@ -15,6 +16,7 @@
 #include <linux/fs.h>
 #include <linux/mman.h>
 #include <linux/sched.h>
+#include <linux/kmemleak.h>
 #include <linux/kvm.h>
 #include <linux/kvm_irqfd.h>
 #include <linux/irqbypass.h>
@@ -42,10 +44,6 @@
 #include <kvm/arm_pmu.h>
 #include <kvm/arm_psci.h>
 
-#ifdef REQUIRES_VIRT
-__asm__(".arch_extension	virt");
-#endif
-
 static enum kvm_mode kvm_mode = KVM_MODE_DEFAULT;
 DEFINE_STATIC_KEY_FALSE(kvm_protected_mode_initialized);
 
@@ -575,7 +573,7 @@ static void update_vmid(struct kvm_vmid *vmid)
 		kvm_call_hyp(__kvm_flush_vm_context);
 	}
 
-	vmid->vmid = kvm_next_vmid;
+	WRITE_ONCE(vmid->vmid, kvm_next_vmid);
 	kvm_next_vmid++;
 	kvm_next_vmid &= (1 << kvm_get_vmid_bits()) - 1;
 
@@ -719,6 +717,45 @@ static bool vcpu_mode_is_bad_32bit(struct kvm_vcpu *vcpu)
 }
 
 /**
+ * kvm_vcpu_exit_request - returns true if the VCPU should *not* enter the guest
+ * @vcpu:	The VCPU pointer
+ * @ret:	Pointer to write optional return code
+ *
+ * Returns: true if the VCPU needs to return to a preemptible + interruptible
+ *	    and skip guest entry.
+ *
+ * This function disambiguates between two different types of exits: exits to a
+ * preemptible + interruptible kernel context and exits to userspace. For an
+ * exit to userspace, this function will write the return code to ret and return
+ * true. For an exit to preemptible + interruptible kernel context (i.e. check
+ * for pending work and re-enter), return true without writing to ret.
+ */
+static bool kvm_vcpu_exit_request(struct kvm_vcpu *vcpu, int *ret)
+{
+	struct kvm_run *run = vcpu->run;
+
+	/*
+	 * If we're using a userspace irqchip, then check if we need
+	 * to tell a userspace irqchip about timer or PMU level
+	 * changes and if so, exit to userspace (the actual level
+	 * state gets updated in kvm_timer_update_run and
+	 * kvm_pmu_update_run below).
+	 */
+	if (static_branch_unlikely(&userspace_irqchip_in_use)) {
+		if (kvm_timer_should_notify_user(vcpu) ||
+		    kvm_pmu_should_notify_user(vcpu)) {
+			*ret = -EINTR;
+			run->exit_reason = KVM_EXIT_INTR;
+			return true;
+		}
+	}
+
+	return kvm_request_pending(vcpu) ||
+			need_new_vmid_gen(&vcpu->arch.hw_mmu->vmid) ||
+			xfer_to_guest_mode_work_pending();
+}
+
+/**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
  *
@@ -761,7 +798,9 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		/*
 		 * Check conditions before entering the guest
 		 */
-		cond_resched();
+		ret = xfer_to_guest_mode_handle_work(vcpu);
+		if (!ret)
+			ret = 1;
 
 		update_vmid(&vcpu->arch.hw_mmu->vmid);
 
@@ -781,30 +820,6 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		kvm_vgic_flush_hwstate(vcpu);
 
 		/*
-		 * Exit if we have a signal pending so that we can deliver the
-		 * signal to user space.
-		 */
-		if (signal_pending(current)) {
-			ret = -EINTR;
-			run->exit_reason = KVM_EXIT_INTR;
-		}
-
-		/*
-		 * If we're using a userspace irqchip, then check if we need
-		 * to tell a userspace irqchip about timer or PMU level
-		 * changes and if so, exit to userspace (the actual level
-		 * state gets updated in kvm_timer_update_run and
-		 * kvm_pmu_update_run below).
-		 */
-		if (static_branch_unlikely(&userspace_irqchip_in_use)) {
-			if (kvm_timer_should_notify_user(vcpu) ||
-			    kvm_pmu_should_notify_user(vcpu)) {
-				ret = -EINTR;
-				run->exit_reason = KVM_EXIT_INTR;
-			}
-		}
-
-		/*
 		 * Ensure we set mode to IN_GUEST_MODE after we disable
 		 * interrupts and before the final VCPU requests check.
 		 * See the comment in kvm_vcpu_exiting_guest_mode() and
@@ -812,8 +827,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		 */
 		smp_store_mb(vcpu->mode, IN_GUEST_MODE);
 
-		if (ret <= 0 || need_new_vmid_gen(&vcpu->arch.hw_mmu->vmid) ||
-		    kvm_request_pending(vcpu)) {
+		if (ret <= 0 || kvm_vcpu_exit_request(vcpu, &ret)) {
 			vcpu->mode = OUTSIDE_GUEST_MODE;
 			isb(); /* Ensure work in x_flush_hwstate is committed */
 			kvm_pmu_sync_hwstate(vcpu);
@@ -1039,7 +1053,7 @@ static int kvm_vcpu_set_target(struct kvm_vcpu *vcpu,
 			       const struct kvm_vcpu_init *init)
 {
 	unsigned int i, ret;
-	int phys_target = kvm_target_cpu();
+	u32 phys_target = kvm_target_cpu();
 
 	if (init->target != phys_target)
 		return -EINVAL;
@@ -1108,6 +1122,7 @@ static int kvm_arch_vcpu_ioctl_vcpu_init(struct kvm_vcpu *vcpu,
 	}
 
 	vcpu_reset_hcr(vcpu);
+	vcpu->arch.cptr_el2 = CPTR_EL2_DEFAULT;
 
 	/*
 	 * Handle the "start in power-off" case.
@@ -1219,6 +1234,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		if (copy_from_user(&reg, argp, sizeof(reg)))
 			break;
 
+		/*
+		 * We could owe a reset due to PSCI. Handle the pending reset
+		 * here to ensure userspace register accesses are ordered after
+		 * the reset.
+		 */
+		if (kvm_check_request(KVM_REQ_VCPU_RESET, vcpu))
+			kvm_reset_vcpu(vcpu);
+
 		if (ioctl == KVM_SET_ONE_REG)
 			r = kvm_arm_set_reg(vcpu, &reg);
 		else
@@ -1700,11 +1723,6 @@ static bool init_psci_relay(void)
 	return true;
 }
 
-static int init_common_resources(void)
-{
-	return kvm_set_ipa_limit();
-}
-
 static int init_subsystems(void)
 {
 	int err = 0;
@@ -1958,56 +1976,17 @@ static void _kvm_host_prot_finalize(void *discard)
 	WARN_ON(kvm_call_hyp_nvhe(__pkvm_prot_finalize));
 }
 
-static inline int pkvm_mark_hyp(phys_addr_t start, phys_addr_t end)
-{
-	return kvm_call_hyp_nvhe(__pkvm_mark_hyp, start, end);
-}
-
-#define pkvm_mark_hyp_section(__section)		\
-	pkvm_mark_hyp(__pa_symbol(__section##_start),	\
-			__pa_symbol(__section##_end))
-
 static int finalize_hyp_mode(void)
 {
-	int cpu, ret;
-
 	if (!is_protected_kvm_enabled())
 		return 0;
 
-	ret = pkvm_mark_hyp_section(__hyp_idmap_text);
-	if (ret)
-		return ret;
-
-	ret = pkvm_mark_hyp_section(__hyp_text);
-	if (ret)
-		return ret;
-
-	ret = pkvm_mark_hyp_section(__hyp_rodata);
-	if (ret)
-		return ret;
-
-	ret = pkvm_mark_hyp_section(__hyp_bss);
-	if (ret)
-		return ret;
-
-	ret = pkvm_mark_hyp(hyp_mem_base, hyp_mem_base + hyp_mem_size);
-	if (ret)
-		return ret;
-
-	for_each_possible_cpu(cpu) {
-		phys_addr_t start = virt_to_phys((void *)kvm_arm_hyp_percpu_base[cpu]);
-		phys_addr_t end = start + (PAGE_SIZE << nvhe_percpu_order());
-
-		ret = pkvm_mark_hyp(start, end);
-		if (ret)
-			return ret;
-
-		start = virt_to_phys((void *)per_cpu(kvm_arm_hyp_stack_page, cpu));
-		end = start + PAGE_SIZE;
-		ret = pkvm_mark_hyp(start, end);
-		if (ret)
-			return ret;
-	}
+	/*
+	 * Exclude HYP BSS from kmemleak so that it doesn't get peeked
+	 * at, which would end badly once the section is inaccessible.
+	 * None of other sections should ever be introspected.
+	 */
+	kmemleak_free_part(__hyp_bss_start, __hyp_bss_end - __hyp_bss_start);
 
 	/*
 	 * Flip the static key upfront as that may no longer be possible
@@ -2019,11 +1998,6 @@ static int finalize_hyp_mode(void)
 	return 0;
 }
 
-static void check_kvm_target_cpu(void *ret)
-{
-	*(int *)ret = kvm_target_cpu();
-}
-
 struct kvm_vcpu *kvm_mpidr_to_vcpu(struct kvm *kvm, unsigned long mpidr)
 {
 	struct kvm_vcpu *vcpu;
@@ -2083,7 +2057,6 @@ void kvm_arch_irq_bypass_start(struct irq_bypass_consumer *cons)
 int kvm_arch_init(void *opaque)
 {
 	int err;
-	int ret, cpu;
 	bool in_hyp_mode;
 
 	if (!is_hyp_mode_available()) {
@@ -2098,15 +2071,7 @@ int kvm_arch_init(void *opaque)
 		kvm_info("Guests without required CPU erratum workarounds can deadlock system!\n" \
 			 "Only trusted guests should be used on this system.\n");
 
-	for_each_online_cpu(cpu) {
-		smp_call_function_single(cpu, check_kvm_target_cpu, &ret, 1);
-		if (ret < 0) {
-			kvm_err("Error, CPU %d not supported!\n", cpu);
-			return -ENODEV;
-		}
-	}
-
-	err = init_common_resources();
+	err = kvm_set_ipa_limit();
 	if (err)
 		return err;
 
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index d5e79d7ee6e9..db9361338b2a 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -21,7 +21,7 @@
 				DBG_MDSCR_KDE | \
 				DBG_MDSCR_MDE)
 
-static DEFINE_PER_CPU(u32, mdcr_el2);
+static DEFINE_PER_CPU(u64, mdcr_el2);
 
 /**
  * save/restore_guest_debug_regs
diff --git a/arch/arm64/kvm/guest.c b/arch/arm64/kvm/guest.c
index 1dfb83578277..5ce26bedf23c 100644
--- a/arch/arm64/kvm/guest.c
+++ b/arch/arm64/kvm/guest.c
@@ -31,8 +31,6 @@
 const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	KVM_GENERIC_VM_STATS()
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -50,10 +48,9 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, wfi_exit_stat),
 	STATS_DESC_COUNTER(VCPU, mmio_exit_user),
 	STATS_DESC_COUNTER(VCPU, mmio_exit_kernel),
+	STATS_DESC_COUNTER(VCPU, signal_exits),
 	STATS_DESC_COUNTER(VCPU, exits)
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -842,7 +839,7 @@ int __kvm_arm_vcpu_set_events(struct kvm_vcpu *vcpu,
 	return 0;
 }
 
-int __attribute_const__ kvm_target_cpu(void)
+u32 __attribute_const__ kvm_target_cpu(void)
 {
 	unsigned long implementor = read_cpuid_implementor();
 	unsigned long part_number = read_cpuid_part_number();
@@ -874,7 +871,7 @@ int __attribute_const__ kvm_target_cpu(void)
 
 int kvm_vcpu_preferred_target(struct kvm_vcpu_init *init)
 {
-	int target = kvm_target_cpu();
+	u32 target = kvm_target_cpu();
 
 	if (target < 0)
 		return -ENODEV;
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 6f48336b1d86..275a27368a04 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -113,34 +113,20 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu)
  * guest and host are using the same debug facilities it will be up to
  * userspace to re-inject the correct exception for guest delivery.
  *
- * @return: 0 (while setting vcpu->run->exit_reason), -1 for error
+ * @return: 0 (while setting vcpu->run->exit_reason)
  */
 static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu)
 {
 	struct kvm_run *run = vcpu->run;
 	u32 esr = kvm_vcpu_get_esr(vcpu);
-	int ret = 0;
 
 	run->exit_reason = KVM_EXIT_DEBUG;
 	run->debug.arch.hsr = esr;
 
-	switch (ESR_ELx_EC(esr)) {
-	case ESR_ELx_EC_WATCHPT_LOW:
+	if (ESR_ELx_EC(esr) == ESR_ELx_EC_WATCHPT_LOW)
 		run->debug.arch.far = vcpu->arch.fault.far_el2;
-		fallthrough;
-	case ESR_ELx_EC_SOFTSTP_LOW:
-	case ESR_ELx_EC_BREAKPT_LOW:
-	case ESR_ELx_EC_BKPT32:
-	case ESR_ELx_EC_BRK64:
-		break;
-	default:
-		kvm_err("%s: un-handled case esr: %#08x\n",
-			__func__, (unsigned int) esr);
-		ret = -1;
-		break;
-	}
 
-	return ret;
+	return 0;
 }
 
 static int kvm_handle_unknown_ec(struct kvm_vcpu *vcpu)
@@ -292,11 +278,12 @@ void handle_exit_early(struct kvm_vcpu *vcpu, int exception_index)
 		kvm_handle_guest_serror(vcpu, kvm_vcpu_get_esr(vcpu));
 }
 
-void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
+void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
+					      u64 elr_virt, u64 elr_phys,
 					      u64 par, uintptr_t vcpu,
 					      u64 far, u64 hpfar) {
-	u64 elr_in_kimg = __phys_to_kimg(__hyp_pa(elr));
-	u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr;
+	u64 elr_in_kimg = __phys_to_kimg(elr_phys);
+	u64 hyp_offset = elr_in_kimg - kaslr_offset() - elr_virt;
 	u64 mode = spsr & PSR_MODE_MASK;
 
 	/*
@@ -309,20 +296,24 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
 		kvm_err("Invalid host exception to nVHE hyp!\n");
 	} else if (ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
 		   (esr & ESR_ELx_BRK64_ISS_COMMENT_MASK) == BUG_BRK_IMM) {
-		struct bug_entry *bug = find_bug(elr_in_kimg);
 		const char *file = NULL;
 		unsigned int line = 0;
 
 		/* All hyp bugs, including warnings, are treated as fatal. */
-		if (bug)
-			bug_get_file_line(bug, &file, &line);
+		if (!is_protected_kvm_enabled() ||
+		    IS_ENABLED(CONFIG_NVHE_EL2_DEBUG)) {
+			struct bug_entry *bug = find_bug(elr_in_kimg);
+
+			if (bug)
+				bug_get_file_line(bug, &file, &line);
+		}
 
 		if (file)
 			kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line);
 		else
-			kvm_err("nVHE hyp BUG at: %016llx!\n", elr + hyp_offset);
+			kvm_err("nVHE hyp BUG at: %016llx!\n", elr_virt + hyp_offset);
 	} else {
-		kvm_err("nVHE hyp panic at: %016llx!\n", elr + hyp_offset);
+		kvm_err("nVHE hyp panic at: %016llx!\n", elr_virt + hyp_offset);
 	}
 
 	/*
@@ -334,5 +325,5 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr, u64 elr,
 	kvm_err("Hyp Offset: 0x%llx\n", hyp_offset);
 
 	panic("HYP panic:\nPS:%08llx PC:%016llx ESR:%08llx\nFAR:%016llx HPFAR:%016llx PAR:%016llx\nVCPU:%016lx\n",
-	      spsr, elr, esr, far, hpfar, par, vcpu);
+	      spsr, elr_virt, esr, far, hpfar, par, vcpu);
 }
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index e4a2f295a394..a0e78a6027be 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -92,11 +92,15 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 		write_sysreg(0, pmselr_el0);
 		write_sysreg(ARMV8_PMU_USERENR_MASK, pmuserenr_el0);
 	}
+
+	vcpu->arch.mdcr_el2_host = read_sysreg(mdcr_el2);
 	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
 }
 
-static inline void __deactivate_traps_common(void)
+static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 {
+	write_sysreg(vcpu->arch.mdcr_el2_host, mdcr_el2);
+
 	write_sysreg(0, hstr_el2);
 	if (kvm_arm_support_pmu_v3())
 		write_sysreg(0, pmuserenr_el0);
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
index 9c227d87c36d..b58c910babaf 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/mem_protect.h
@@ -12,6 +12,32 @@
 #include <asm/virt.h>
 #include <nvhe/spinlock.h>
 
+/*
+ * SW bits 0-1 are reserved to track the memory ownership state of each page:
+ *   00: The page is owned exclusively by the page-table owner.
+ *   01: The page is owned by the page-table owner, but is shared
+ *       with another entity.
+ *   10: The page is shared with, but not owned by the page-table owner.
+ *   11: Reserved for future use (lending).
+ */
+enum pkvm_page_state {
+	PKVM_PAGE_OWNED			= 0ULL,
+	PKVM_PAGE_SHARED_OWNED		= KVM_PGTABLE_PROT_SW0,
+	PKVM_PAGE_SHARED_BORROWED	= KVM_PGTABLE_PROT_SW1,
+};
+
+#define PKVM_PAGE_STATE_PROT_MASK	(KVM_PGTABLE_PROT_SW0 | KVM_PGTABLE_PROT_SW1)
+static inline enum kvm_pgtable_prot pkvm_mkstate(enum kvm_pgtable_prot prot,
+						 enum pkvm_page_state state)
+{
+	return (prot & ~PKVM_PAGE_STATE_PROT_MASK) | state;
+}
+
+static inline enum pkvm_page_state pkvm_getstate(enum kvm_pgtable_prot prot)
+{
+	return prot & PKVM_PAGE_STATE_PROT_MASK;
+}
+
 struct host_kvm {
 	struct kvm_arch arch;
 	struct kvm_pgtable pgt;
@@ -20,16 +46,21 @@ struct host_kvm {
 };
 extern struct host_kvm host_kvm;
 
+extern const u8 pkvm_hyp_id;
+
 int __pkvm_prot_finalize(void);
-int __pkvm_mark_hyp(phys_addr_t start, phys_addr_t end);
+int __pkvm_host_share_hyp(u64 pfn);
 
+bool addr_is_memory(phys_addr_t phys);
+int host_stage2_idmap_locked(phys_addr_t addr, u64 size, enum kvm_pgtable_prot prot);
+int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id);
 int kvm_host_prepare_stage2(void *pgt_pool_base);
 void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt);
 
 static __always_inline void __load_host_stage2(void)
 {
 	if (static_branch_likely(&kvm_protected_mode_initialized))
-		__load_stage2(&host_kvm.arch.mmu, host_kvm.arch.vtcr);
+		__load_stage2(&host_kvm.arch.mmu, &host_kvm.arch);
 	else
 		write_sysreg(0, vttbr_el2);
 }
diff --git a/arch/arm64/kvm/hyp/include/nvhe/mm.h b/arch/arm64/kvm/hyp/include/nvhe/mm.h
index 8ec3a5a7744b..c9a8f535212e 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/mm.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/mm.h
@@ -23,8 +23,7 @@ int hyp_map_vectors(void);
 int hyp_back_vmemmap(phys_addr_t phys, unsigned long size, phys_addr_t back);
 int pkvm_cpu_set_vector(enum arm64_hyp_spectre_vector slot);
 int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot);
-int __pkvm_create_mappings(unsigned long start, unsigned long size,
-			   unsigned long phys, enum kvm_pgtable_prot prot);
+int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot);
 unsigned long __pkvm_create_private_mapping(phys_addr_t phys, size_t size,
 					    enum kvm_pgtable_prot prot);
 
diff --git a/arch/arm64/kvm/hyp/include/nvhe/spinlock.h b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h
index 76b537f8d1c6..4652fd04bdbe 100644
--- a/arch/arm64/kvm/hyp/include/nvhe/spinlock.h
+++ b/arch/arm64/kvm/hyp/include/nvhe/spinlock.h
@@ -15,6 +15,7 @@
 
 #include <asm/alternative.h>
 #include <asm/lse.h>
+#include <asm/rwonce.h>
 
 typedef union hyp_spinlock {
 	u32	__val;
@@ -89,4 +90,28 @@ static inline void hyp_spin_unlock(hyp_spinlock_t *lock)
 	: "memory");
 }
 
+static inline bool hyp_spin_is_locked(hyp_spinlock_t *lock)
+{
+	hyp_spinlock_t lockval = READ_ONCE(*lock);
+
+	return lockval.owner != lockval.next;
+}
+
+#ifdef CONFIG_NVHE_EL2_DEBUG
+static inline void hyp_assert_lock_held(hyp_spinlock_t *lock)
+{
+	/*
+	 * The __pkvm_init() path accesses protected data-structures without
+	 * holding locks as the other CPUs are guaranteed to not enter EL2
+	 * concurrently at this point in time. The point by which EL2 is
+	 * initialized on all CPUs is reflected in the pkvm static key, so
+	 * wait until it is set before checking the lock state.
+	 */
+	if (static_branch_likely(&kvm_protected_mode_initialized))
+		BUG_ON(!hyp_spin_is_locked(lock));
+}
+#else
+static inline void hyp_assert_lock_held(hyp_spinlock_t *lock) { }
+#endif
+
 #endif /* __ARM64_KVM_NVHE_SPINLOCK_H__ */
diff --git a/arch/arm64/kvm/hyp/nvhe/debug-sr.c b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
index 7d3f25868cae..df361d839902 100644
--- a/arch/arm64/kvm/hyp/nvhe/debug-sr.c
+++ b/arch/arm64/kvm/hyp/nvhe/debug-sr.c
@@ -109,7 +109,7 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 	__debug_switch_to_host_common(vcpu);
 }
 
-u32 __kvm_get_mdcr_el2(void)
+u64 __kvm_get_mdcr_el2(void)
 {
 	return read_sysreg(mdcr_el2);
 }
diff --git a/arch/arm64/kvm/hyp/nvhe/host.S b/arch/arm64/kvm/hyp/nvhe/host.S
index 2b23400e0fb3..4b652ffb591d 100644
--- a/arch/arm64/kvm/hyp/nvhe/host.S
+++ b/arch/arm64/kvm/hyp/nvhe/host.S
@@ -7,6 +7,7 @@
 #include <linux/linkage.h>
 
 #include <asm/assembler.h>
+#include <asm/kvm_arm.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_mmu.h>
 
@@ -85,12 +86,24 @@ SYM_FUNC_START(__hyp_do_panic)
 
 	mov	x29, x0
 
+#ifdef CONFIG_NVHE_EL2_DEBUG
+	/* Ensure host stage-2 is disabled */
+	mrs	x0, hcr_el2
+	bic	x0, x0, #HCR_VM
+	msr	hcr_el2, x0
+	isb
+	tlbi	vmalls12e1
+	dsb	nsh
+#endif
+
 	/* Load the panic arguments into x0-7 */
 	mrs	x0, esr_el2
-	get_vcpu_ptr x4, x5
-	mrs	x5, far_el2
-	mrs	x6, hpfar_el2
-	mov	x7, xzr			// Unused argument
+	mov	x4, x3
+	mov	x3, x2
+	hyp_pa	x3, x6
+	get_vcpu_ptr x5, x6
+	mrs	x6, far_el2
+	mrs	x7, hpfar_el2
 
 	/* Enter the host, conditionally restoring the host context. */
 	cbz	x29, __host_enter_without_restoring
diff --git a/arch/arm64/kvm/hyp/nvhe/hyp-main.c b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
index 1632f001f4ed..2da6aa8da868 100644
--- a/arch/arm64/kvm/hyp/nvhe/hyp-main.c
+++ b/arch/arm64/kvm/hyp/nvhe/hyp-main.c
@@ -140,14 +140,11 @@ static void handle___pkvm_cpu_set_vector(struct kvm_cpu_context *host_ctxt)
 	cpu_reg(host_ctxt, 1) = pkvm_cpu_set_vector(slot);
 }
 
-static void handle___pkvm_create_mappings(struct kvm_cpu_context *host_ctxt)
+static void handle___pkvm_host_share_hyp(struct kvm_cpu_context *host_ctxt)
 {
-	DECLARE_REG(unsigned long, start, host_ctxt, 1);
-	DECLARE_REG(unsigned long, size, host_ctxt, 2);
-	DECLARE_REG(unsigned long, phys, host_ctxt, 3);
-	DECLARE_REG(enum kvm_pgtable_prot, prot, host_ctxt, 4);
+	DECLARE_REG(u64, pfn, host_ctxt, 1);
 
-	cpu_reg(host_ctxt, 1) = __pkvm_create_mappings(start, size, phys, prot);
+	cpu_reg(host_ctxt, 1) = __pkvm_host_share_hyp(pfn);
 }
 
 static void handle___pkvm_create_private_mapping(struct kvm_cpu_context *host_ctxt)
@@ -163,14 +160,6 @@ static void handle___pkvm_prot_finalize(struct kvm_cpu_context *host_ctxt)
 {
 	cpu_reg(host_ctxt, 1) = __pkvm_prot_finalize();
 }
-
-static void handle___pkvm_mark_hyp(struct kvm_cpu_context *host_ctxt)
-{
-	DECLARE_REG(phys_addr_t, start, host_ctxt, 1);
-	DECLARE_REG(phys_addr_t, end, host_ctxt, 2);
-
-	cpu_reg(host_ctxt, 1) = __pkvm_mark_hyp(start, end);
-}
 typedef void (*hcall_t)(struct kvm_cpu_context *);
 
 #define HANDLE_FUNC(x)	[__KVM_HOST_SMCCC_FUNC_##x] = (hcall_t)handle_##x
@@ -193,10 +182,9 @@ static const hcall_t host_hcall[] = {
 	HANDLE_FUNC(__vgic_v3_restore_aprs),
 	HANDLE_FUNC(__pkvm_init),
 	HANDLE_FUNC(__pkvm_cpu_set_vector),
-	HANDLE_FUNC(__pkvm_create_mappings),
+	HANDLE_FUNC(__pkvm_host_share_hyp),
 	HANDLE_FUNC(__pkvm_create_private_mapping),
 	HANDLE_FUNC(__pkvm_prot_finalize),
-	HANDLE_FUNC(__pkvm_mark_hyp),
 };
 
 static void handle_host_hcall(struct kvm_cpu_context *host_ctxt)
diff --git a/arch/arm64/kvm/hyp/nvhe/mem_protect.c b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
index a6ce991b1467..bacd493a4eac 100644
--- a/arch/arm64/kvm/hyp/nvhe/mem_protect.c
+++ b/arch/arm64/kvm/hyp/nvhe/mem_protect.c
@@ -31,7 +31,7 @@ static struct hyp_pool host_s2_pool;
 u64 id_aa64mmfr0_el1_sys_val;
 u64 id_aa64mmfr1_el1_sys_val;
 
-static const u8 pkvm_hyp_id = 1;
+const u8 pkvm_hyp_id = 1;
 
 static void *host_s2_zalloc_pages_exact(size_t size)
 {
@@ -89,6 +89,8 @@ static void prepare_host_vtcr(void)
 					  id_aa64mmfr1_el1_sys_val, phys_shift);
 }
 
+static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot);
+
 int kvm_host_prepare_stage2(void *pgt_pool_base)
 {
 	struct kvm_s2_mmu *mmu = &host_kvm.arch.mmu;
@@ -101,16 +103,17 @@ int kvm_host_prepare_stage2(void *pgt_pool_base)
 	if (ret)
 		return ret;
 
-	ret = kvm_pgtable_stage2_init_flags(&host_kvm.pgt, &host_kvm.arch,
-					    &host_kvm.mm_ops, KVM_HOST_S2_FLAGS);
+	ret = __kvm_pgtable_stage2_init(&host_kvm.pgt, &host_kvm.arch,
+					&host_kvm.mm_ops, KVM_HOST_S2_FLAGS,
+					host_stage2_force_pte_cb);
 	if (ret)
 		return ret;
 
 	mmu->pgd_phys = __hyp_pa(host_kvm.pgt.pgd);
 	mmu->arch = &host_kvm.arch;
 	mmu->pgt = &host_kvm.pgt;
-	mmu->vmid.vmid_gen = 0;
-	mmu->vmid.vmid = 0;
+	WRITE_ONCE(mmu->vmid.vmid_gen, 0);
+	WRITE_ONCE(mmu->vmid.vmid, 0);
 
 	return 0;
 }
@@ -126,7 +129,7 @@ int __pkvm_prot_finalize(void)
 	kvm_flush_dcache_to_poc(params, sizeof(*params));
 
 	write_sysreg(params->hcr_el2, hcr_el2);
-	__load_stage2(&host_kvm.arch.mmu, host_kvm.arch.vtcr);
+	__load_stage2(&host_kvm.arch.mmu, &host_kvm.arch);
 
 	/*
 	 * Make sure to have an ISB before the TLB maintenance below but only
@@ -159,6 +162,11 @@ static int host_stage2_unmap_dev_all(void)
 	return kvm_pgtable_stage2_unmap(pgt, addr, BIT(pgt->ia_bits) - addr);
 }
 
+struct kvm_mem_range {
+	u64 start;
+	u64 end;
+};
+
 static bool find_mem_range(phys_addr_t addr, struct kvm_mem_range *range)
 {
 	int cur, left = 0, right = hyp_memblock_nr;
@@ -189,16 +197,26 @@ static bool find_mem_range(phys_addr_t addr, struct kvm_mem_range *range)
 	return false;
 }
 
+bool addr_is_memory(phys_addr_t phys)
+{
+	struct kvm_mem_range range;
+
+	return find_mem_range(phys, &range);
+}
+
+static bool is_in_mem_range(u64 addr, struct kvm_mem_range *range)
+{
+	return range->start <= addr && addr < range->end;
+}
+
 static bool range_is_memory(u64 start, u64 end)
 {
-	struct kvm_mem_range r1, r2;
+	struct kvm_mem_range r;
 
-	if (!find_mem_range(start, &r1) || !find_mem_range(end - 1, &r2))
-		return false;
-	if (r1.start != r2.start)
+	if (!find_mem_range(start, &r))
 		return false;
 
-	return true;
+	return is_in_mem_range(end - 1, &r);
 }
 
 static inline int __host_stage2_idmap(u64 start, u64 end,
@@ -208,60 +226,208 @@ static inline int __host_stage2_idmap(u64 start, u64 end,
 				      prot, &host_s2_pool);
 }
 
+/*
+ * The pool has been provided with enough pages to cover all of memory with
+ * page granularity, but it is difficult to know how much of the MMIO range
+ * we will need to cover upfront, so we may need to 'recycle' the pages if we
+ * run out.
+ */
+#define host_stage2_try(fn, ...)					\
+	({								\
+		int __ret;						\
+		hyp_assert_lock_held(&host_kvm.lock);			\
+		__ret = fn(__VA_ARGS__);				\
+		if (__ret == -ENOMEM) {					\
+			__ret = host_stage2_unmap_dev_all();		\
+			if (!__ret)					\
+				__ret = fn(__VA_ARGS__);		\
+		}							\
+		__ret;							\
+	 })
+
+static inline bool range_included(struct kvm_mem_range *child,
+				  struct kvm_mem_range *parent)
+{
+	return parent->start <= child->start && child->end <= parent->end;
+}
+
+static int host_stage2_adjust_range(u64 addr, struct kvm_mem_range *range)
+{
+	struct kvm_mem_range cur;
+	kvm_pte_t pte;
+	u32 level;
+	int ret;
+
+	hyp_assert_lock_held(&host_kvm.lock);
+	ret = kvm_pgtable_get_leaf(&host_kvm.pgt, addr, &pte, &level);
+	if (ret)
+		return ret;
+
+	if (kvm_pte_valid(pte))
+		return -EAGAIN;
+
+	if (pte)
+		return -EPERM;
+
+	do {
+		u64 granule = kvm_granule_size(level);
+		cur.start = ALIGN_DOWN(addr, granule);
+		cur.end = cur.start + granule;
+		level++;
+	} while ((level < KVM_PGTABLE_MAX_LEVELS) &&
+			!(kvm_level_supports_block_mapping(level) &&
+			  range_included(&cur, range)));
+
+	*range = cur;
+
+	return 0;
+}
+
+int host_stage2_idmap_locked(phys_addr_t addr, u64 size,
+			     enum kvm_pgtable_prot prot)
+{
+	hyp_assert_lock_held(&host_kvm.lock);
+
+	return host_stage2_try(__host_stage2_idmap, addr, addr + size, prot);
+}
+
+int host_stage2_set_owner_locked(phys_addr_t addr, u64 size, u8 owner_id)
+{
+	hyp_assert_lock_held(&host_kvm.lock);
+
+	return host_stage2_try(kvm_pgtable_stage2_set_owner, &host_kvm.pgt,
+			       addr, size, &host_s2_pool, owner_id);
+}
+
+static bool host_stage2_force_pte_cb(u64 addr, u64 end, enum kvm_pgtable_prot prot)
+{
+	/*
+	 * Block mappings must be used with care in the host stage-2 as a
+	 * kvm_pgtable_stage2_map() operation targeting a page in the range of
+	 * an existing block will delete the block under the assumption that
+	 * mappings in the rest of the block range can always be rebuilt lazily.
+	 * That assumption is correct for the host stage-2 with RWX mappings
+	 * targeting memory or RW mappings targeting MMIO ranges (see
+	 * host_stage2_idmap() below which implements some of the host memory
+	 * abort logic). However, this is not safe for any other mappings where
+	 * the host stage-2 page-table is in fact the only place where this
+	 * state is stored. In all those cases, it is safer to use page-level
+	 * mappings, hence avoiding to lose the state because of side-effects in
+	 * kvm_pgtable_stage2_map().
+	 */
+	if (range_is_memory(addr, end))
+		return prot != PKVM_HOST_MEM_PROT;
+	else
+		return prot != PKVM_HOST_MMIO_PROT;
+}
+
 static int host_stage2_idmap(u64 addr)
 {
-	enum kvm_pgtable_prot prot = KVM_PGTABLE_PROT_R | KVM_PGTABLE_PROT_W;
 	struct kvm_mem_range range;
 	bool is_memory = find_mem_range(addr, &range);
+	enum kvm_pgtable_prot prot;
 	int ret;
 
-	if (is_memory)
-		prot |= KVM_PGTABLE_PROT_X;
+	prot = is_memory ? PKVM_HOST_MEM_PROT : PKVM_HOST_MMIO_PROT;
 
 	hyp_spin_lock(&host_kvm.lock);
-	ret = kvm_pgtable_stage2_find_range(&host_kvm.pgt, addr, prot, &range);
+	ret = host_stage2_adjust_range(addr, &range);
 	if (ret)
 		goto unlock;
 
-	ret = __host_stage2_idmap(range.start, range.end, prot);
-	if (ret != -ENOMEM)
+	ret = host_stage2_idmap_locked(range.start, range.end - range.start, prot);
+unlock:
+	hyp_spin_unlock(&host_kvm.lock);
+
+	return ret;
+}
+
+static inline bool check_prot(enum kvm_pgtable_prot prot,
+			      enum kvm_pgtable_prot required,
+			      enum kvm_pgtable_prot denied)
+{
+	return (prot & (required | denied)) == required;
+}
+
+int __pkvm_host_share_hyp(u64 pfn)
+{
+	phys_addr_t addr = hyp_pfn_to_phys(pfn);
+	enum kvm_pgtable_prot prot, cur;
+	void *virt = __hyp_va(addr);
+	enum pkvm_page_state state;
+	kvm_pte_t pte;
+	int ret;
+
+	if (!addr_is_memory(addr))
+		return -EINVAL;
+
+	hyp_spin_lock(&host_kvm.lock);
+	hyp_spin_lock(&pkvm_pgd_lock);
+
+	ret = kvm_pgtable_get_leaf(&host_kvm.pgt, addr, &pte, NULL);
+	if (ret)
 		goto unlock;
+	if (!pte)
+		goto map_shared;
 
 	/*
-	 * The pool has been provided with enough pages to cover all of memory
-	 * with page granularity, but it is difficult to know how much of the
-	 * MMIO range we will need to cover upfront, so we may need to 'recycle'
-	 * the pages if we run out.
+	 * Check attributes in the host stage-2 PTE. We need the page to be:
+	 *  - mapped RWX as we're sharing memory;
+	 *  - not borrowed, as that implies absence of ownership.
+	 * Otherwise, we can't let it got through
 	 */
-	ret = host_stage2_unmap_dev_all();
-	if (ret)
+	cur = kvm_pgtable_stage2_pte_prot(pte);
+	prot = pkvm_mkstate(0, PKVM_PAGE_SHARED_BORROWED);
+	if (!check_prot(cur, PKVM_HOST_MEM_PROT, prot)) {
+		ret = -EPERM;
 		goto unlock;
+	}
 
-	ret = __host_stage2_idmap(range.start, range.end, prot);
+	state = pkvm_getstate(cur);
+	if (state == PKVM_PAGE_OWNED)
+		goto map_shared;
 
-unlock:
-	hyp_spin_unlock(&host_kvm.lock);
+	/*
+	 * Tolerate double-sharing the same page, but this requires
+	 * cross-checking the hypervisor stage-1.
+	 */
+	if (state != PKVM_PAGE_SHARED_OWNED) {
+		ret = -EPERM;
+		goto unlock;
+	}
 
-	return ret;
-}
+	ret = kvm_pgtable_get_leaf(&pkvm_pgtable, (u64)virt, &pte, NULL);
+	if (ret)
+		goto unlock;
 
-int __pkvm_mark_hyp(phys_addr_t start, phys_addr_t end)
-{
-	int ret;
+	/*
+	 * If the page has been shared with the hypervisor, it must be
+	 * already mapped as SHARED_BORROWED in its stage-1.
+	 */
+	cur = kvm_pgtable_hyp_pte_prot(pte);
+	prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_SHARED_BORROWED);
+	if (!check_prot(cur, prot, ~prot))
+		ret = -EPERM;
+	goto unlock;
 
+map_shared:
 	/*
-	 * host_stage2_unmap_dev_all() currently relies on MMIO mappings being
-	 * non-persistent, so don't allow changing page ownership in MMIO range.
+	 * If the page is not yet shared, adjust mappings in both page-tables
+	 * while both locks are held.
 	 */
-	if (!range_is_memory(start, end))
-		return -EINVAL;
+	prot = pkvm_mkstate(PAGE_HYP, PKVM_PAGE_SHARED_BORROWED);
+	ret = pkvm_create_mappings_locked(virt, virt + PAGE_SIZE, prot);
+	BUG_ON(ret);
 
-	hyp_spin_lock(&host_kvm.lock);
-	ret = kvm_pgtable_stage2_set_owner(&host_kvm.pgt, start, end - start,
-					   &host_s2_pool, pkvm_hyp_id);
+	prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED);
+	ret = host_stage2_idmap_locked(addr, PAGE_SIZE, prot);
+	BUG_ON(ret);
+
+unlock:
+	hyp_spin_unlock(&pkvm_pgd_lock);
 	hyp_spin_unlock(&host_kvm.lock);
 
-	return ret != -EAGAIN ? ret : 0;
+	return ret;
 }
 
 void handle_host_mem_abort(struct kvm_cpu_context *host_ctxt)
diff --git a/arch/arm64/kvm/hyp/nvhe/mm.c b/arch/arm64/kvm/hyp/nvhe/mm.c
index a8efdf0f9003..2fabeceb889a 100644
--- a/arch/arm64/kvm/hyp/nvhe/mm.c
+++ b/arch/arm64/kvm/hyp/nvhe/mm.c
@@ -23,8 +23,8 @@ u64 __io_map_base;
 struct memblock_region hyp_memory[HYP_MEMBLOCK_REGIONS];
 unsigned int hyp_memblock_nr;
 
-int __pkvm_create_mappings(unsigned long start, unsigned long size,
-			  unsigned long phys, enum kvm_pgtable_prot prot)
+static int __pkvm_create_mappings(unsigned long start, unsigned long size,
+				  unsigned long phys, enum kvm_pgtable_prot prot)
 {
 	int err;
 
@@ -67,13 +67,15 @@ out:
 	return addr;
 }
 
-int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
+int pkvm_create_mappings_locked(void *from, void *to, enum kvm_pgtable_prot prot)
 {
 	unsigned long start = (unsigned long)from;
 	unsigned long end = (unsigned long)to;
 	unsigned long virt_addr;
 	phys_addr_t phys;
 
+	hyp_assert_lock_held(&pkvm_pgd_lock);
+
 	start = start & PAGE_MASK;
 	end = PAGE_ALIGN(end);
 
@@ -81,7 +83,8 @@ int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
 		int err;
 
 		phys = hyp_virt_to_phys((void *)virt_addr);
-		err = __pkvm_create_mappings(virt_addr, PAGE_SIZE, phys, prot);
+		err = kvm_pgtable_hyp_map(&pkvm_pgtable, virt_addr, PAGE_SIZE,
+					  phys, prot);
 		if (err)
 			return err;
 	}
@@ -89,6 +92,17 @@ int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
 	return 0;
 }
 
+int pkvm_create_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
+{
+	int ret;
+
+	hyp_spin_lock(&pkvm_pgd_lock);
+	ret = pkvm_create_mappings_locked(from, to, prot);
+	hyp_spin_unlock(&pkvm_pgd_lock);
+
+	return ret;
+}
+
 int hyp_back_vmemmap(phys_addr_t phys, unsigned long size, phys_addr_t back)
 {
 	unsigned long start, end;
diff --git a/arch/arm64/kvm/hyp/nvhe/setup.c b/arch/arm64/kvm/hyp/nvhe/setup.c
index 0b574d106519..57c27846320f 100644
--- a/arch/arm64/kvm/hyp/nvhe/setup.c
+++ b/arch/arm64/kvm/hyp/nvhe/setup.c
@@ -58,6 +58,7 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 {
 	void *start, *end, *virt = hyp_phys_to_virt(phys);
 	unsigned long pgt_size = hyp_s1_pgtable_pages() << PAGE_SHIFT;
+	enum kvm_pgtable_prot prot;
 	int ret, i;
 
 	/* Recreate the hyp page-table using the early page allocator */
@@ -83,10 +84,6 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 	if (ret)
 		return ret;
 
-	ret = pkvm_create_mappings(__start_rodata, __end_rodata, PAGE_HYP_RO);
-	if (ret)
-		return ret;
-
 	ret = pkvm_create_mappings(__hyp_rodata_start, __hyp_rodata_end, PAGE_HYP_RO);
 	if (ret)
 		return ret;
@@ -95,10 +92,6 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 	if (ret)
 		return ret;
 
-	ret = pkvm_create_mappings(__hyp_bss_end, __bss_stop, PAGE_HYP_RO);
-	if (ret)
-		return ret;
-
 	ret = pkvm_create_mappings(virt, virt + size, PAGE_HYP);
 	if (ret)
 		return ret;
@@ -117,6 +110,24 @@ static int recreate_hyp_mappings(phys_addr_t phys, unsigned long size,
 			return ret;
 	}
 
+	/*
+	 * Map the host's .bss and .rodata sections RO in the hypervisor, but
+	 * transfer the ownership from the host to the hypervisor itself to
+	 * make sure it can't be donated or shared with another entity.
+	 *
+	 * The ownership transition requires matching changes in the host
+	 * stage-2. This will be done later (see finalize_host_mappings()) once
+	 * the hyp_vmemmap is addressable.
+	 */
+	prot = pkvm_mkstate(PAGE_HYP_RO, PKVM_PAGE_SHARED_OWNED);
+	ret = pkvm_create_mappings(__start_rodata, __end_rodata, prot);
+	if (ret)
+		return ret;
+
+	ret = pkvm_create_mappings(__hyp_bss_end, __bss_stop, prot);
+	if (ret)
+		return ret;
+
 	return 0;
 }
 
@@ -148,6 +159,57 @@ static void hpool_put_page(void *addr)
 	hyp_put_page(&hpool, addr);
 }
 
+static int finalize_host_mappings_walker(u64 addr, u64 end, u32 level,
+					 kvm_pte_t *ptep,
+					 enum kvm_pgtable_walk_flags flag,
+					 void * const arg)
+{
+	enum kvm_pgtable_prot prot;
+	enum pkvm_page_state state;
+	kvm_pte_t pte = *ptep;
+	phys_addr_t phys;
+
+	if (!kvm_pte_valid(pte))
+		return 0;
+
+	if (level != (KVM_PGTABLE_MAX_LEVELS - 1))
+		return -EINVAL;
+
+	phys = kvm_pte_to_phys(pte);
+	if (!addr_is_memory(phys))
+		return 0;
+
+	/*
+	 * Adjust the host stage-2 mappings to match the ownership attributes
+	 * configured in the hypervisor stage-1.
+	 */
+	state = pkvm_getstate(kvm_pgtable_hyp_pte_prot(pte));
+	switch (state) {
+	case PKVM_PAGE_OWNED:
+		return host_stage2_set_owner_locked(phys, PAGE_SIZE, pkvm_hyp_id);
+	case PKVM_PAGE_SHARED_OWNED:
+		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_BORROWED);
+		break;
+	case PKVM_PAGE_SHARED_BORROWED:
+		prot = pkvm_mkstate(PKVM_HOST_MEM_PROT, PKVM_PAGE_SHARED_OWNED);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return host_stage2_idmap_locked(phys, PAGE_SIZE, prot);
+}
+
+static int finalize_host_mappings(void)
+{
+	struct kvm_pgtable_walker walker = {
+		.cb	= finalize_host_mappings_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+	};
+
+	return kvm_pgtable_walk(&pkvm_pgtable, 0, BIT(pkvm_pgtable.ia_bits), &walker);
+}
+
 void __noreturn __pkvm_init_finalise(void)
 {
 	struct kvm_host_data *host_data = this_cpu_ptr(&kvm_host_data);
@@ -167,6 +229,10 @@ void __noreturn __pkvm_init_finalise(void)
 	if (ret)
 		goto out;
 
+	ret = finalize_host_mappings();
+	if (ret)
+		goto out;
+
 	pkvm_pgtable_mm_ops = (struct kvm_pgtable_mm_ops) {
 		.zalloc_page = hyp_zalloc_hyp_page,
 		.phys_to_virt = hyp_phys_to_virt,
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
index f7af9688c1f7..a34b01cc8ab9 100644
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -41,7 +41,7 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 	___activate_traps(vcpu);
 	__activate_traps_common(vcpu);
 
-	val = CPTR_EL2_DEFAULT;
+	val = vcpu->arch.cptr_el2;
 	val |= CPTR_EL2_TTA | CPTR_EL2_TAM;
 	if (!update_fp_enabled(vcpu)) {
 		val |= CPTR_EL2_TFP | CPTR_EL2_TZ;
@@ -69,12 +69,10 @@ static void __activate_traps(struct kvm_vcpu *vcpu)
 static void __deactivate_traps(struct kvm_vcpu *vcpu)
 {
 	extern char __kvm_hyp_host_vector[];
-	u64 mdcr_el2, cptr;
+	u64 cptr;
 
 	___deactivate_traps(vcpu);
 
-	mdcr_el2 = read_sysreg(mdcr_el2);
-
 	if (cpus_have_final_cap(ARM64_WORKAROUND_SPECULATIVE_AT)) {
 		u64 val;
 
@@ -92,13 +90,8 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 		isb();
 	}
 
-	__deactivate_traps_common();
-
-	mdcr_el2 &= MDCR_EL2_HPMN_MASK;
-	mdcr_el2 |= MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT;
-	mdcr_el2 |= MDCR_EL2_E2TB_MASK << MDCR_EL2_E2TB_SHIFT;
+	__deactivate_traps_common(vcpu);
 
-	write_sysreg(mdcr_el2, mdcr_el2);
 	write_sysreg(this_cpu_ptr(&kvm_init_params)->hcr_el2, hcr_el2);
 
 	cptr = CPTR_EL2_DEFAULT;
@@ -170,6 +163,7 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *host_ctxt;
 	struct kvm_cpu_context *guest_ctxt;
+	struct kvm_s2_mmu *mmu;
 	bool pmu_switch_needed;
 	u64 exit_code;
 
@@ -213,7 +207,8 @@ int __kvm_vcpu_run(struct kvm_vcpu *vcpu)
 	__sysreg32_restore_state(vcpu);
 	__sysreg_restore_state_nvhe(guest_ctxt);
 
-	__load_guest_stage2(kern_hyp_va(vcpu->arch.hw_mmu));
+	mmu = kern_hyp_va(vcpu->arch.hw_mmu);
+	__load_stage2(mmu, kern_hyp_va(mmu->arch));
 	__activate_traps(vcpu);
 
 	__hyp_vgic_restore_state(vcpu);
diff --git a/arch/arm64/kvm/hyp/nvhe/tlb.c b/arch/arm64/kvm/hyp/nvhe/tlb.c
index 38ed0f6f2703..d296d617f589 100644
--- a/arch/arm64/kvm/hyp/nvhe/tlb.c
+++ b/arch/arm64/kvm/hyp/nvhe/tlb.c
@@ -34,12 +34,12 @@ static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
 	}
 
 	/*
-	 * __load_guest_stage2() includes an ISB only when the AT
+	 * __load_stage2() includes an ISB only when the AT
 	 * workaround is applied. Take care of the opposite condition,
 	 * ensuring that we always have an ISB, but not two ISBs back
 	 * to back.
 	 */
-	__load_guest_stage2(mmu);
+	__load_stage2(mmu, kern_hyp_va(mmu->arch));
 	asm(ALTERNATIVE("isb", "nop", ARM64_WORKAROUND_SPECULATIVE_AT));
 }
 
diff --git a/arch/arm64/kvm/hyp/pgtable.c b/arch/arm64/kvm/hyp/pgtable.c
index 05321f4165e3..f8ceebe4982e 100644
--- a/arch/arm64/kvm/hyp/pgtable.c
+++ b/arch/arm64/kvm/hyp/pgtable.c
@@ -11,16 +11,12 @@
 #include <asm/kvm_pgtable.h>
 #include <asm/stage2_pgtable.h>
 
-#define KVM_PTE_VALID			BIT(0)
 
 #define KVM_PTE_TYPE			BIT(1)
 #define KVM_PTE_TYPE_BLOCK		0
 #define KVM_PTE_TYPE_PAGE		1
 #define KVM_PTE_TYPE_TABLE		1
 
-#define KVM_PTE_ADDR_MASK		GENMASK(47, PAGE_SHIFT)
-#define KVM_PTE_ADDR_51_48		GENMASK(15, 12)
-
 #define KVM_PTE_LEAF_ATTR_LO		GENMASK(11, 2)
 
 #define KVM_PTE_LEAF_ATTR_LO_S1_ATTRIDX	GENMASK(4, 2)
@@ -40,6 +36,8 @@
 
 #define KVM_PTE_LEAF_ATTR_HI		GENMASK(63, 51)
 
+#define KVM_PTE_LEAF_ATTR_HI_SW		GENMASK(58, 55)
+
 #define KVM_PTE_LEAF_ATTR_HI_S1_XN	BIT(54)
 
 #define KVM_PTE_LEAF_ATTR_HI_S2_XN	BIT(54)
@@ -48,9 +46,7 @@
 					 KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W | \
 					 KVM_PTE_LEAF_ATTR_HI_S2_XN)
 
-#define KVM_PTE_LEAF_ATTR_S2_IGNORED	GENMASK(58, 55)
-
-#define KVM_INVALID_PTE_OWNER_MASK	GENMASK(63, 56)
+#define KVM_INVALID_PTE_OWNER_MASK	GENMASK(9, 2)
 #define KVM_MAX_OWNER_ID		1
 
 struct kvm_pgtable_walk_data {
@@ -61,17 +57,6 @@ struct kvm_pgtable_walk_data {
 	u64				end;
 };
 
-static u64 kvm_granule_shift(u32 level)
-{
-	/* Assumes KVM_PGTABLE_MAX_LEVELS is 4 */
-	return ARM64_HW_PGTABLE_LEVEL_SHIFT(level);
-}
-
-static u64 kvm_granule_size(u32 level)
-{
-	return BIT(kvm_granule_shift(level));
-}
-
 #define KVM_PHYS_INVALID (-1ULL)
 
 static bool kvm_phys_is_valid(u64 phys)
@@ -79,15 +64,6 @@ static bool kvm_phys_is_valid(u64 phys)
 	return phys < BIT(id_aa64mmfr0_parange_to_phys_shift(ID_AA64MMFR0_PARANGE_MAX));
 }
 
-static bool kvm_level_supports_block_mapping(u32 level)
-{
-	/*
-	 * Reject invalid block mappings and don't bother with 4TB mappings for
-	 * 52-bit PAs.
-	 */
-	return !(level == 0 || (PAGE_SIZE != SZ_4K && level == 1));
-}
-
 static bool kvm_block_mapping_supported(u64 addr, u64 end, u64 phys, u32 level)
 {
 	u64 granule = kvm_granule_size(level);
@@ -135,11 +111,6 @@ static u32 kvm_pgd_pages(u32 ia_bits, u32 start_level)
 	return __kvm_pgd_page_idx(&pgt, -1ULL) + 1;
 }
 
-static bool kvm_pte_valid(kvm_pte_t pte)
-{
-	return pte & KVM_PTE_VALID;
-}
-
 static bool kvm_pte_table(kvm_pte_t pte, u32 level)
 {
 	if (level == KVM_PGTABLE_MAX_LEVELS - 1)
@@ -151,16 +122,6 @@ static bool kvm_pte_table(kvm_pte_t pte, u32 level)
 	return FIELD_GET(KVM_PTE_TYPE, pte) == KVM_PTE_TYPE_TABLE;
 }
 
-static u64 kvm_pte_to_phys(kvm_pte_t pte)
-{
-	u64 pa = pte & KVM_PTE_ADDR_MASK;
-
-	if (PAGE_SHIFT == 16)
-		pa |= FIELD_GET(KVM_PTE_ADDR_51_48, pte) << 48;
-
-	return pa;
-}
-
 static kvm_pte_t kvm_phys_to_pte(u64 pa)
 {
 	kvm_pte_t pte = pa & KVM_PTE_ADDR_MASK;
@@ -326,6 +287,45 @@ int kvm_pgtable_walk(struct kvm_pgtable *pgt, u64 addr, u64 size,
 	return _kvm_pgtable_walk(&walk_data);
 }
 
+struct leaf_walk_data {
+	kvm_pte_t	pte;
+	u32		level;
+};
+
+static int leaf_walker(u64 addr, u64 end, u32 level, kvm_pte_t *ptep,
+		       enum kvm_pgtable_walk_flags flag, void * const arg)
+{
+	struct leaf_walk_data *data = arg;
+
+	data->pte   = *ptep;
+	data->level = level;
+
+	return 0;
+}
+
+int kvm_pgtable_get_leaf(struct kvm_pgtable *pgt, u64 addr,
+			 kvm_pte_t *ptep, u32 *level)
+{
+	struct leaf_walk_data data;
+	struct kvm_pgtable_walker walker = {
+		.cb	= leaf_walker,
+		.flags	= KVM_PGTABLE_WALK_LEAF,
+		.arg	= &data,
+	};
+	int ret;
+
+	ret = kvm_pgtable_walk(pgt, ALIGN_DOWN(addr, PAGE_SIZE),
+			       PAGE_SIZE, &walker);
+	if (!ret) {
+		if (ptep)
+			*ptep  = data.pte;
+		if (level)
+			*level = data.level;
+	}
+
+	return ret;
+}
+
 struct hyp_map_data {
 	u64				phys;
 	kvm_pte_t			attr;
@@ -357,11 +357,47 @@ static int hyp_set_prot_attr(enum kvm_pgtable_prot prot, kvm_pte_t *ptep)
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_AP, ap);
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S1_SH, sh);
 	attr |= KVM_PTE_LEAF_ATTR_LO_S1_AF;
+	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
 
 	return 0;
 }
 
+enum kvm_pgtable_prot kvm_pgtable_hyp_pte_prot(kvm_pte_t pte)
+{
+	enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW;
+	u32 ap;
+
+	if (!kvm_pte_valid(pte))
+		return prot;
+
+	if (!(pte & KVM_PTE_LEAF_ATTR_HI_S1_XN))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	ap = FIELD_GET(KVM_PTE_LEAF_ATTR_LO_S1_AP, pte);
+	if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RO)
+		prot |= KVM_PGTABLE_PROT_R;
+	else if (ap == KVM_PTE_LEAF_ATTR_LO_S1_AP_RW)
+		prot |= KVM_PGTABLE_PROT_RW;
+
+	return prot;
+}
+
+static bool hyp_pte_needs_update(kvm_pte_t old, kvm_pte_t new)
+{
+	/*
+	 * Tolerate KVM recreating the exact same mapping, or changing software
+	 * bits if the existing mapping was valid.
+	 */
+	if (old == new)
+		return false;
+
+	if (!kvm_pte_valid(old))
+		return true;
+
+	return !WARN_ON((old ^ new) & ~KVM_PTE_LEAF_ATTR_HI_SW);
+}
+
 static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level,
 				    kvm_pte_t *ptep, struct hyp_map_data *data)
 {
@@ -371,9 +407,8 @@ static bool hyp_map_walker_try_leaf(u64 addr, u64 end, u32 level,
 	if (!kvm_block_mapping_supported(addr, end, phys, level))
 		return false;
 
-	/* Tolerate KVM recreating the exact same mapping */
 	new = kvm_init_valid_leaf_pte(phys, data->attr, level);
-	if (old != new && !WARN_ON(kvm_pte_valid(old)))
+	if (hyp_pte_needs_update(old, new))
 		smp_store_release(ptep, new);
 
 	data->phys += granule;
@@ -438,6 +473,8 @@ int kvm_pgtable_hyp_init(struct kvm_pgtable *pgt, u32 va_bits,
 	pgt->start_level	= KVM_PGTABLE_MAX_LEVELS - levels;
 	pgt->mm_ops		= mm_ops;
 	pgt->mmu		= NULL;
+	pgt->force_pte_cb	= NULL;
+
 	return 0;
 }
 
@@ -475,6 +512,9 @@ struct stage2_map_data {
 	void				*memcache;
 
 	struct kvm_pgtable_mm_ops	*mm_ops;
+
+	/* Force mappings to page granularity */
+	bool				force_pte;
 };
 
 u64 kvm_get_vtcr(u64 mmfr0, u64 mmfr1, u32 phys_shift)
@@ -539,11 +579,29 @@ static int stage2_set_prot_attr(struct kvm_pgtable *pgt, enum kvm_pgtable_prot p
 
 	attr |= FIELD_PREP(KVM_PTE_LEAF_ATTR_LO_S2_SH, sh);
 	attr |= KVM_PTE_LEAF_ATTR_LO_S2_AF;
+	attr |= prot & KVM_PTE_LEAF_ATTR_HI_SW;
 	*ptep = attr;
 
 	return 0;
 }
 
+enum kvm_pgtable_prot kvm_pgtable_stage2_pte_prot(kvm_pte_t pte)
+{
+	enum kvm_pgtable_prot prot = pte & KVM_PTE_LEAF_ATTR_HI_SW;
+
+	if (!kvm_pte_valid(pte))
+		return prot;
+
+	if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R)
+		prot |= KVM_PGTABLE_PROT_R;
+	if (pte & KVM_PTE_LEAF_ATTR_LO_S2_S2AP_W)
+		prot |= KVM_PGTABLE_PROT_W;
+	if (!(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN))
+		prot |= KVM_PGTABLE_PROT_X;
+
+	return prot;
+}
+
 static bool stage2_pte_needs_update(kvm_pte_t old, kvm_pte_t new)
 {
 	if (!kvm_pte_valid(old) || !kvm_pte_valid(new))
@@ -588,6 +646,15 @@ static bool stage2_pte_executable(kvm_pte_t pte)
 	return !(pte & KVM_PTE_LEAF_ATTR_HI_S2_XN);
 }
 
+static bool stage2_leaf_mapping_allowed(u64 addr, u64 end, u32 level,
+					struct stage2_map_data *data)
+{
+	if (data->force_pte && (level < (KVM_PGTABLE_MAX_LEVELS - 1)))
+		return false;
+
+	return kvm_block_mapping_supported(addr, end, data->phys, level);
+}
+
 static int stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level,
 				      kvm_pte_t *ptep,
 				      struct stage2_map_data *data)
@@ -597,7 +664,7 @@ static int stage2_map_walker_try_leaf(u64 addr, u64 end, u32 level,
 	struct kvm_pgtable *pgt = data->mmu->pgt;
 	struct kvm_pgtable_mm_ops *mm_ops = data->mm_ops;
 
-	if (!kvm_block_mapping_supported(addr, end, phys, level))
+	if (!stage2_leaf_mapping_allowed(addr, end, level, data))
 		return -E2BIG;
 
 	if (kvm_phys_is_valid(phys))
@@ -641,7 +708,7 @@ static int stage2_map_walk_table_pre(u64 addr, u64 end, u32 level,
 	if (data->anchor)
 		return 0;
 
-	if (!kvm_block_mapping_supported(addr, end, data->phys, level))
+	if (!stage2_leaf_mapping_allowed(addr, end, level, data))
 		return 0;
 
 	data->childp = kvm_pte_follow(*ptep, data->mm_ops);
@@ -771,6 +838,7 @@ int kvm_pgtable_stage2_map(struct kvm_pgtable *pgt, u64 addr, u64 size,
 		.mmu		= pgt->mmu,
 		.memcache	= mc,
 		.mm_ops		= pgt->mm_ops,
+		.force_pte	= pgt->force_pte_cb && pgt->force_pte_cb(addr, addr + size, prot),
 	};
 	struct kvm_pgtable_walker walker = {
 		.cb		= stage2_map_walker,
@@ -802,6 +870,7 @@ int kvm_pgtable_stage2_set_owner(struct kvm_pgtable *pgt, u64 addr, u64 size,
 		.memcache	= mc,
 		.mm_ops		= pgt->mm_ops,
 		.owner_id	= owner_id,
+		.force_pte	= true,
 	};
 	struct kvm_pgtable_walker walker = {
 		.cb		= stage2_map_walker,
@@ -995,6 +1064,9 @@ int kvm_pgtable_stage2_relax_perms(struct kvm_pgtable *pgt, u64 addr,
 	u32 level;
 	kvm_pte_t set = 0, clr = 0;
 
+	if (prot & KVM_PTE_LEAF_ATTR_HI_SW)
+		return -EINVAL;
+
 	if (prot & KVM_PGTABLE_PROT_R)
 		set |= KVM_PTE_LEAF_ATTR_LO_S2_S2AP_R;
 
@@ -1043,9 +1115,11 @@ int kvm_pgtable_stage2_flush(struct kvm_pgtable *pgt, u64 addr, u64 size)
 	return kvm_pgtable_walk(pgt, addr, size, &walker);
 }
 
-int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch,
-				  struct kvm_pgtable_mm_ops *mm_ops,
-				  enum kvm_pgtable_stage2_flags flags)
+
+int __kvm_pgtable_stage2_init(struct kvm_pgtable *pgt, struct kvm_arch *arch,
+			      struct kvm_pgtable_mm_ops *mm_ops,
+			      enum kvm_pgtable_stage2_flags flags,
+			      kvm_pgtable_force_pte_cb_t force_pte_cb)
 {
 	size_t pgd_sz;
 	u64 vtcr = arch->vtcr;
@@ -1063,6 +1137,7 @@ int kvm_pgtable_stage2_init_flags(struct kvm_pgtable *pgt, struct kvm_arch *arch
 	pgt->mm_ops		= mm_ops;
 	pgt->mmu		= &arch->mmu;
 	pgt->flags		= flags;
+	pgt->force_pte_cb	= force_pte_cb;
 
 	/* Ensure zeroed PGD pages are visible to the hardware walker */
 	dsb(ishst);
@@ -1102,77 +1177,3 @@ void kvm_pgtable_stage2_destroy(struct kvm_pgtable *pgt)
 	pgt->mm_ops->free_pages_exact(pgt->pgd, pgd_sz);
 	pgt->pgd = NULL;
 }
-
-#define KVM_PTE_LEAF_S2_COMPAT_MASK	(KVM_PTE_LEAF_ATTR_S2_PERMS | \
-					 KVM_PTE_LEAF_ATTR_LO_S2_MEMATTR | \
-					 KVM_PTE_LEAF_ATTR_S2_IGNORED)
-
-static int stage2_check_permission_walker(u64 addr, u64 end, u32 level,
-					  kvm_pte_t *ptep,
-					  enum kvm_pgtable_walk_flags flag,
-					  void * const arg)
-{
-	kvm_pte_t old_attr, pte = *ptep, *new_attr = arg;
-
-	/*
-	 * Compatible mappings are either invalid and owned by the page-table
-	 * owner (whose id is 0), or valid with matching permission attributes.
-	 */
-	if (kvm_pte_valid(pte)) {
-		old_attr = pte & KVM_PTE_LEAF_S2_COMPAT_MASK;
-		if (old_attr != *new_attr)
-			return -EEXIST;
-	} else if (pte) {
-		return -EEXIST;
-	}
-
-	return 0;
-}
-
-int kvm_pgtable_stage2_find_range(struct kvm_pgtable *pgt, u64 addr,
-				  enum kvm_pgtable_prot prot,
-				  struct kvm_mem_range *range)
-{
-	kvm_pte_t attr;
-	struct kvm_pgtable_walker check_perm_walker = {
-		.cb		= stage2_check_permission_walker,
-		.flags		= KVM_PGTABLE_WALK_LEAF,
-		.arg		= &attr,
-	};
-	u64 granule, start, end;
-	u32 level;
-	int ret;
-
-	ret = stage2_set_prot_attr(pgt, prot, &attr);
-	if (ret)
-		return ret;
-	attr &= KVM_PTE_LEAF_S2_COMPAT_MASK;
-
-	for (level = pgt->start_level; level < KVM_PGTABLE_MAX_LEVELS; level++) {
-		granule = kvm_granule_size(level);
-		start = ALIGN_DOWN(addr, granule);
-		end = start + granule;
-
-		if (!kvm_level_supports_block_mapping(level))
-			continue;
-
-		if (start < range->start || range->end < end)
-			continue;
-
-		/*
-		 * Check the presence of existing mappings with incompatible
-		 * permissions within the current block range, and try one level
-		 * deeper if one is found.
-		 */
-		ret = kvm_pgtable_walk(pgt, start, granule, &check_perm_walker);
-		if (ret != -EEXIST)
-			break;
-	}
-
-	if (!ret) {
-		range->start = start;
-		range->end = end;
-	}
-
-	return ret;
-}
diff --git a/arch/arm64/kvm/hyp/vhe/debug-sr.c b/arch/arm64/kvm/hyp/vhe/debug-sr.c
index f1e2e5a00933..289689b2682d 100644
--- a/arch/arm64/kvm/hyp/vhe/debug-sr.c
+++ b/arch/arm64/kvm/hyp/vhe/debug-sr.c
@@ -20,7 +20,7 @@ void __debug_switch_to_host(struct kvm_vcpu *vcpu)
 	__debug_switch_to_host_common(vcpu);
 }
 
-u32 __kvm_get_mdcr_el2(void)
+u64 __kvm_get_mdcr_el2(void)
 {
 	return read_sysreg(mdcr_el2);
 }
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index b3229924d243..ded2c66675f0 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -91,17 +91,9 @@ void activate_traps_vhe_load(struct kvm_vcpu *vcpu)
 	__activate_traps_common(vcpu);
 }
 
-void deactivate_traps_vhe_put(void)
+void deactivate_traps_vhe_put(struct kvm_vcpu *vcpu)
 {
-	u64 mdcr_el2 = read_sysreg(mdcr_el2);
-
-	mdcr_el2 &= MDCR_EL2_HPMN_MASK |
-		    MDCR_EL2_E2PB_MASK << MDCR_EL2_E2PB_SHIFT |
-		    MDCR_EL2_TPMS;
-
-	write_sysreg(mdcr_el2, mdcr_el2);
-
-	__deactivate_traps_common();
+	__deactivate_traps_common(vcpu);
 }
 
 /* Switch to the guest for VHE systems running in EL2 */
@@ -124,11 +116,11 @@ static int __kvm_vcpu_run_vhe(struct kvm_vcpu *vcpu)
 	 *
 	 * We have already configured the guest's stage 1 translation in
 	 * kvm_vcpu_load_sysregs_vhe above.  We must now call
-	 * __load_guest_stage2 before __activate_traps, because
-	 * __load_guest_stage2 configures stage 2 translation, and
+	 * __load_stage2 before __activate_traps, because
+	 * __load_stage2 configures stage 2 translation, and
 	 * __activate_traps clear HCR_EL2.TGE (among other things).
 	 */
-	__load_guest_stage2(vcpu->arch.hw_mmu);
+	__load_stage2(vcpu->arch.hw_mmu, vcpu->arch.hw_mmu->arch);
 	__activate_traps(vcpu);
 
 	__kvm_adjust_pc(vcpu);
diff --git a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
index 2a0b8c88d74f..007a12dd4351 100644
--- a/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
+++ b/arch/arm64/kvm/hyp/vhe/sysreg-sr.c
@@ -101,7 +101,7 @@ void kvm_vcpu_put_sysregs_vhe(struct kvm_vcpu *vcpu)
 	struct kvm_cpu_context *host_ctxt;
 
 	host_ctxt = &this_cpu_ptr(&kvm_host_data)->host_ctxt;
-	deactivate_traps_vhe_put();
+	deactivate_traps_vhe_put(vcpu);
 
 	__sysreg_save_el1_state(guest_ctxt);
 	__sysreg_save_user_state(guest_ctxt);
diff --git a/arch/arm64/kvm/hyp/vhe/tlb.c b/arch/arm64/kvm/hyp/vhe/tlb.c
index 66f17349f0c3..24cef9b87f9e 100644
--- a/arch/arm64/kvm/hyp/vhe/tlb.c
+++ b/arch/arm64/kvm/hyp/vhe/tlb.c
@@ -50,10 +50,10 @@ static void __tlb_switch_to_guest(struct kvm_s2_mmu *mmu,
 	 *
 	 * ARM erratum 1165522 requires some special handling (again),
 	 * as we need to make sure both stages of translation are in
-	 * place before clearing TGE. __load_guest_stage2() already
+	 * place before clearing TGE. __load_stage2() already
 	 * has an ISB in order to deal with this.
 	 */
-	__load_guest_stage2(mmu);
+	__load_stage2(mmu, mmu->arch);
 	val = read_sysreg(hcr_el2);
 	val &= ~HCR_TGE;
 	write_sysreg(val, hcr_el2);
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 0625bf2353c2..1a94a7ca48f2 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -80,6 +80,7 @@ static bool memslot_is_logging(struct kvm_memory_slot *memslot)
  */
 void kvm_flush_remote_tlbs(struct kvm *kvm)
 {
+	++kvm->stat.generic.remote_tlb_flush_requests;
 	kvm_call_hyp(__kvm_tlb_flush_vmid, &kvm->arch.mmu);
 }
 
@@ -259,10 +260,8 @@ static int __create_hyp_mappings(unsigned long start, unsigned long size,
 {
 	int err;
 
-	if (!kvm_host_owns_hyp_mappings()) {
-		return kvm_call_hyp_nvhe(__pkvm_create_mappings,
-					 start, size, phys, prot);
-	}
+	if (WARN_ON(!kvm_host_owns_hyp_mappings()))
+		return -EINVAL;
 
 	mutex_lock(&kvm_hyp_pgd_mutex);
 	err = kvm_pgtable_hyp_map(hyp_pgtable, start, size, phys, prot);
@@ -282,6 +281,21 @@ static phys_addr_t kvm_kaddr_to_phys(void *kaddr)
 	}
 }
 
+static int pkvm_share_hyp(phys_addr_t start, phys_addr_t end)
+{
+	phys_addr_t addr;
+	int ret;
+
+	for (addr = ALIGN_DOWN(start, PAGE_SIZE); addr < end; addr += PAGE_SIZE) {
+		ret = kvm_call_hyp_nvhe(__pkvm_host_share_hyp,
+					__phys_to_pfn(addr));
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 /**
  * create_hyp_mappings - duplicate a kernel virtual address range in Hyp mode
  * @from:	The virtual kernel start address of the range
@@ -302,6 +316,13 @@ int create_hyp_mappings(void *from, void *to, enum kvm_pgtable_prot prot)
 	if (is_kernel_in_hyp_mode())
 		return 0;
 
+	if (!kvm_host_owns_hyp_mappings()) {
+		if (WARN_ON(prot != PAGE_HYP))
+			return -EPERM;
+		return pkvm_share_hyp(kvm_kaddr_to_phys(from),
+				      kvm_kaddr_to_phys(to));
+	}
+
 	start = start & PAGE_MASK;
 	end = PAGE_ALIGN(end);
 
@@ -433,6 +454,32 @@ int create_hyp_exec_mappings(phys_addr_t phys_addr, size_t size,
 	return 0;
 }
 
+static struct kvm_pgtable_mm_ops kvm_user_mm_ops = {
+	/* We shouldn't need any other callback to walk the PT */
+	.phys_to_virt		= kvm_host_va,
+};
+
+static int get_user_mapping_size(struct kvm *kvm, u64 addr)
+{
+	struct kvm_pgtable pgt = {
+		.pgd		= (kvm_pte_t *)kvm->mm->pgd,
+		.ia_bits	= VA_BITS,
+		.start_level	= (KVM_PGTABLE_MAX_LEVELS -
+				   CONFIG_PGTABLE_LEVELS),
+		.mm_ops		= &kvm_user_mm_ops,
+	};
+	kvm_pte_t pte = 0;	/* Keep GCC quiet... */
+	u32 level = ~0;
+	int ret;
+
+	ret = kvm_pgtable_get_leaf(&pgt, addr, &pte, &level);
+	VM_BUG_ON(ret);
+	VM_BUG_ON(level >= KVM_PGTABLE_MAX_LEVELS);
+	VM_BUG_ON(!(pte & PTE_VALID));
+
+	return BIT(ARM64_HW_PGTABLE_LEVEL_SHIFT(level));
+}
+
 static struct kvm_pgtable_mm_ops kvm_s2_mm_ops = {
 	.zalloc_page		= stage2_memcache_zalloc_page,
 	.zalloc_pages_exact	= kvm_host_zalloc_pages_exact,
@@ -485,7 +532,7 @@ int kvm_init_stage2_mmu(struct kvm *kvm, struct kvm_s2_mmu *mmu)
 	mmu->arch = &kvm->arch;
 	mmu->pgt = pgt;
 	mmu->pgd_phys = __pa(pgt->pgd);
-	mmu->vmid.vmid_gen = 0;
+	WRITE_ONCE(mmu->vmid.vmid_gen, 0);
 	return 0;
 
 out_destroy_pgtable:
@@ -780,7 +827,7 @@ static bool fault_supports_stage2_huge_mapping(struct kvm_memory_slot *memslot,
  * Returns the size of the mapping.
  */
 static unsigned long
-transparent_hugepage_adjust(struct kvm_memory_slot *memslot,
+transparent_hugepage_adjust(struct kvm *kvm, struct kvm_memory_slot *memslot,
 			    unsigned long hva, kvm_pfn_t *pfnp,
 			    phys_addr_t *ipap)
 {
@@ -791,8 +838,8 @@ transparent_hugepage_adjust(struct kvm_memory_slot *memslot,
 	 * sure that the HVA and IPA are sufficiently aligned and that the
 	 * block map is contained within the memslot.
 	 */
-	if (kvm_is_transparent_hugepage(pfn) &&
-	    fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE)) {
+	if (fault_supports_stage2_huge_mapping(memslot, hva, PMD_SIZE) &&
+	    get_user_mapping_size(kvm, hva) >= PMD_SIZE) {
 		/*
 		 * The address we faulted on is backed by a transparent huge
 		 * page.  However, because we map the compound huge page and
@@ -814,7 +861,7 @@ transparent_hugepage_adjust(struct kvm_memory_slot *memslot,
 		*ipap &= PMD_MASK;
 		kvm_release_pfn_clean(pfn);
 		pfn &= ~(PTRS_PER_PMD - 1);
-		kvm_get_pfn(pfn);
+		get_page(pfn_to_page(pfn));
 		*pfnp = pfn;
 
 		return PMD_SIZE;
@@ -1050,9 +1097,14 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	 * If we are not forced to use page mapping, check if we are
 	 * backed by a THP and thus use block mapping if possible.
 	 */
-	if (vma_pagesize == PAGE_SIZE && !(force_pte || device))
-		vma_pagesize = transparent_hugepage_adjust(memslot, hva,
-							   &pfn, &fault_ipa);
+	if (vma_pagesize == PAGE_SIZE && !(force_pte || device)) {
+		if (fault_status == FSC_PERM && fault_granule > PAGE_SIZE)
+			vma_pagesize = fault_granule;
+		else
+			vma_pagesize = transparent_hugepage_adjust(kvm, memslot,
+								   hva, &pfn,
+								   &fault_ipa);
+	}
 
 	if (fault_status != FSC_PERM && !device && kvm_has_mte(kvm)) {
 		/* Check the VMM hasn't introduced a new VM_SHARED VMA */
diff --git a/arch/arm64/kvm/perf.c b/arch/arm64/kvm/perf.c
index 151c31fb9860..f9bb3b14130e 100644
--- a/arch/arm64/kvm/perf.c
+++ b/arch/arm64/kvm/perf.c
@@ -50,7 +50,7 @@ static struct perf_guest_info_callbacks kvm_guest_cbs = {
 
 int kvm_perf_init(void)
 {
-	if (kvm_pmu_probe_pmuver() != 0xf && !is_protected_kvm_enabled())
+	if (kvm_pmu_probe_pmuver() != ID_AA64DFR0_PMUVER_IMP_DEF && !is_protected_kvm_enabled())
 		static_branch_enable(&kvm_arm_pmu_available);
 
 	return perf_register_guest_info_callbacks(&kvm_guest_cbs);
diff --git a/arch/arm64/kvm/pmu-emul.c b/arch/arm64/kvm/pmu-emul.c
index f33825c995cb..f5065f23b413 100644
--- a/arch/arm64/kvm/pmu-emul.c
+++ b/arch/arm64/kvm/pmu-emul.c
@@ -373,7 +373,6 @@ static u64 kvm_pmu_overflow_status(struct kvm_vcpu *vcpu)
 		reg = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 		reg &= __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
 		reg &= __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
-		reg &= kvm_pmu_valid_counter_mask(vcpu);
 	}
 
 	return reg;
@@ -564,20 +563,21 @@ void kvm_pmu_software_increment(struct kvm_vcpu *vcpu, u64 val)
  */
 void kvm_pmu_handle_pmcr(struct kvm_vcpu *vcpu, u64 val)
 {
-	unsigned long mask = kvm_pmu_valid_counter_mask(vcpu);
 	int i;
 
 	if (val & ARMV8_PMU_PMCR_E) {
 		kvm_pmu_enable_counter_mask(vcpu,
-		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask);
+		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
 	} else {
-		kvm_pmu_disable_counter_mask(vcpu, mask);
+		kvm_pmu_disable_counter_mask(vcpu,
+		       __vcpu_sys_reg(vcpu, PMCNTENSET_EL0));
 	}
 
 	if (val & ARMV8_PMU_PMCR_C)
 		kvm_pmu_set_counter_value(vcpu, ARMV8_PMU_CYCLE_IDX, 0);
 
 	if (val & ARMV8_PMU_PMCR_P) {
+		unsigned long mask = kvm_pmu_valid_counter_mask(vcpu);
 		mask &= ~BIT(ARMV8_PMU_CYCLE_IDX);
 		for_each_set_bit(i, &mask, 32)
 			kvm_pmu_set_counter_value(vcpu, i, 0);
@@ -745,7 +745,7 @@ int kvm_pmu_probe_pmuver(void)
 	struct perf_event_attr attr = { };
 	struct perf_event *event;
 	struct arm_pmu *pmu;
-	int pmuver = 0xf;
+	int pmuver = ID_AA64DFR0_PMUVER_IMP_DEF;
 
 	/*
 	 * Create a dummy event that only counts user cycles. As we'll never
@@ -770,7 +770,7 @@ int kvm_pmu_probe_pmuver(void)
 	if (IS_ERR(event)) {
 		pr_err_once("kvm: pmu event creation failed %ld\n",
 			    PTR_ERR(event));
-		return 0xf;
+		return ID_AA64DFR0_PMUVER_IMP_DEF;
 	}
 
 	if (event->pmu) {
@@ -923,7 +923,7 @@ int kvm_arm_pmu_v3_set_attr(struct kvm_vcpu *vcpu, struct kvm_device_attr *attr)
 	if (!vcpu->kvm->arch.pmuver)
 		vcpu->kvm->arch.pmuver = kvm_pmu_probe_pmuver();
 
-	if (vcpu->kvm->arch.pmuver == 0xf)
+	if (vcpu->kvm->arch.pmuver == ID_AA64DFR0_PMUVER_IMP_DEF)
 		return -ENODEV;
 
 	switch (attr->attr) {
diff --git a/arch/arm64/kvm/psci.c b/arch/arm64/kvm/psci.c
index db4056ecccfd..74c47d420253 100644
--- a/arch/arm64/kvm/psci.c
+++ b/arch/arm64/kvm/psci.c
@@ -59,6 +59,12 @@ static void kvm_psci_vcpu_off(struct kvm_vcpu *vcpu)
 	kvm_vcpu_kick(vcpu);
 }
 
+static inline bool kvm_psci_valid_affinity(struct kvm_vcpu *vcpu,
+					   unsigned long affinity)
+{
+	return !(affinity & ~MPIDR_HWID_BITMASK);
+}
+
 static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 {
 	struct vcpu_reset_state *reset_state;
@@ -66,9 +72,9 @@ static unsigned long kvm_psci_vcpu_on(struct kvm_vcpu *source_vcpu)
 	struct kvm_vcpu *vcpu = NULL;
 	unsigned long cpu_id;
 
-	cpu_id = smccc_get_arg1(source_vcpu) & MPIDR_HWID_BITMASK;
-	if (vcpu_mode_is_32bit(source_vcpu))
-		cpu_id &= ~((u32) 0);
+	cpu_id = smccc_get_arg1(source_vcpu);
+	if (!kvm_psci_valid_affinity(source_vcpu, cpu_id))
+		return PSCI_RET_INVALID_PARAMS;
 
 	vcpu = kvm_mpidr_to_vcpu(kvm, cpu_id);
 
@@ -126,6 +132,9 @@ static unsigned long kvm_psci_vcpu_affinity_info(struct kvm_vcpu *vcpu)
 	target_affinity = smccc_get_arg1(vcpu);
 	lowest_affinity_level = smccc_get_arg2(vcpu);
 
+	if (!kvm_psci_valid_affinity(vcpu, target_affinity))
+		return PSCI_RET_INVALID_PARAMS;
+
 	/* Determine target affinity mask */
 	target_affinity_mask = psci_affinity_mask(lowest_affinity_level);
 	if (!target_affinity_mask)
diff --git a/arch/arm64/kvm/reset.c b/arch/arm64/kvm/reset.c
index cba7872d69a8..5ce36b0a3343 100644
--- a/arch/arm64/kvm/reset.c
+++ b/arch/arm64/kvm/reset.c
@@ -210,10 +210,16 @@ static bool vcpu_allowed_register_width(struct kvm_vcpu *vcpu)
  */
 int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 {
+	struct vcpu_reset_state reset_state;
 	int ret;
 	bool loaded;
 	u32 pstate;
 
+	mutex_lock(&vcpu->kvm->lock);
+	reset_state = vcpu->arch.reset_state;
+	WRITE_ONCE(vcpu->arch.reset_state.reset, false);
+	mutex_unlock(&vcpu->kvm->lock);
+
 	/* Reset PMU outside of the non-preemptible section */
 	kvm_pmu_vcpu_reset(vcpu);
 
@@ -276,8 +282,8 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 	 * Additional reset state handling that PSCI may have imposed on us.
 	 * Must be done after all the sys_reg reset.
 	 */
-	if (vcpu->arch.reset_state.reset) {
-		unsigned long target_pc = vcpu->arch.reset_state.pc;
+	if (reset_state.reset) {
+		unsigned long target_pc = reset_state.pc;
 
 		/* Gracefully handle Thumb2 entry point */
 		if (vcpu_mode_is_32bit(vcpu) && (target_pc & 1)) {
@@ -286,13 +292,11 @@ int kvm_reset_vcpu(struct kvm_vcpu *vcpu)
 		}
 
 		/* Propagate caller endianness */
-		if (vcpu->arch.reset_state.be)
+		if (reset_state.be)
 			kvm_vcpu_set_be(vcpu);
 
 		*vcpu_pc(vcpu) = target_pc;
-		vcpu_set_reg(vcpu, 0, vcpu->arch.reset_state.r0);
-
-		vcpu->arch.reset_state.reset = false;
+		vcpu_set_reg(vcpu, 0, reset_state.r0);
 	}
 
 	/* Reset timer */
@@ -311,31 +315,26 @@ u32 get_kvm_ipa_limit(void)
 
 int kvm_set_ipa_limit(void)
 {
-	unsigned int parange, tgran_2;
+	unsigned int parange;
 	u64 mmfr0;
 
 	mmfr0 = read_sanitised_ftr_reg(SYS_ID_AA64MMFR0_EL1);
 	parange = cpuid_feature_extract_unsigned_field(mmfr0,
 				ID_AA64MMFR0_PARANGE_SHIFT);
+	/*
+	 * IPA size beyond 48 bits could not be supported
+	 * on either 4K or 16K page size. Hence let's cap
+	 * it to 48 bits, in case it's reported as larger
+	 * on the system.
+	 */
+	if (PAGE_SIZE != SZ_64K)
+		parange = min(parange, (unsigned int)ID_AA64MMFR0_PARANGE_48);
 
 	/*
 	 * Check with ARMv8.5-GTG that our PAGE_SIZE is supported at
 	 * Stage-2. If not, things will stop very quickly.
 	 */
-	switch (PAGE_SIZE) {
-	default:
-	case SZ_4K:
-		tgran_2 = ID_AA64MMFR0_TGRAN4_2_SHIFT;
-		break;
-	case SZ_16K:
-		tgran_2 = ID_AA64MMFR0_TGRAN16_2_SHIFT;
-		break;
-	case SZ_64K:
-		tgran_2 = ID_AA64MMFR0_TGRAN64_2_SHIFT;
-		break;
-	}
-
-	switch (cpuid_feature_extract_unsigned_field(mmfr0, tgran_2)) {
+	switch (cpuid_feature_extract_unsigned_field(mmfr0, ID_AA64MMFR0_TGRAN_2_SHIFT)) {
 	case ID_AA64MMFR0_TGRAN_2_SUPPORTED_NONE:
 		kvm_err("PAGE_SIZE not supported at Stage-2, giving up\n");
 		return -EINVAL;
@@ -369,7 +368,7 @@ int kvm_arm_setup_stage2(struct kvm *kvm, unsigned long type)
 	phys_shift = KVM_VM_TYPE_ARM_IPA_SIZE(type);
 	if (phys_shift) {
 		if (phys_shift > kvm_ipa_limit ||
-		    phys_shift < 32)
+		    phys_shift < ARM64_MIN_PARANGE_BITS)
 			return -EINVAL;
 	} else {
 		phys_shift = KVM_PHYS_SHIFT;
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index f6f126eb6ac1..1d46e185f31e 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -44,10 +44,6 @@
  * 64bit interface.
  */
 
-#define reg_to_encoding(x)						\
-	sys_reg((u32)(x)->Op0, (u32)(x)->Op1,				\
-		(u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2)
-
 static bool read_from_write_only(struct kvm_vcpu *vcpu,
 				 struct sys_reg_params *params,
 				 const struct sys_reg_desc *r)
@@ -318,14 +314,14 @@ static bool trap_dbgauthstatus_el1(struct kvm_vcpu *vcpu,
 /*
  * We want to avoid world-switching all the DBG registers all the
  * time:
- * 
+ *
  * - If we've touched any debug register, it is likely that we're
  *   going to touch more of them. It then makes sense to disable the
  *   traps and start doing the save/restore dance
  * - If debug is active (DBG_MDSCR_KDE or DBG_MDSCR_MDE set), it is
  *   then mandatory to save/restore the registers, as the guest
  *   depends on them.
- * 
+ *
  * For this, we use a DIRTY bit, indicating the guest has modified the
  * debug registers, used as follow:
  *
@@ -603,6 +599,41 @@ static unsigned int pmu_visibility(const struct kvm_vcpu *vcpu,
 	return REG_HIDDEN;
 }
 
+static void reset_pmu_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	u64 n, mask = BIT(ARMV8_PMU_CYCLE_IDX);
+
+	/* No PMU available, any PMU reg may UNDEF... */
+	if (!kvm_arm_support_pmu_v3())
+		return;
+
+	n = read_sysreg(pmcr_el0) >> ARMV8_PMU_PMCR_N_SHIFT;
+	n &= ARMV8_PMU_PMCR_N_MASK;
+	if (n)
+		mask |= GENMASK(n - 1, 0);
+
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= mask;
+}
+
+static void reset_pmevcntr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= GENMASK(31, 0);
+}
+
+static void reset_pmevtyper(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_EVTYPE_MASK;
+}
+
+static void reset_pmselr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
+{
+	reset_unknown(vcpu, r);
+	__vcpu_sys_reg(vcpu, r->reg) &= ARMV8_PMU_COUNTER_MASK;
+}
+
 static void reset_pmcr(struct kvm_vcpu *vcpu, const struct sys_reg_desc *r)
 {
 	u64 pmcr, val;
@@ -845,7 +876,7 @@ static bool access_pmcnten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			kvm_pmu_disable_counter_mask(vcpu, val);
 		}
 	} else {
-		p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0) & mask;
+		p->regval = __vcpu_sys_reg(vcpu, PMCNTENSET_EL0);
 	}
 
 	return true;
@@ -869,7 +900,7 @@ static bool access_pminten(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			/* accessing PMINTENCLR_EL1 */
 			__vcpu_sys_reg(vcpu, PMINTENSET_EL1) &= ~val;
 	} else {
-		p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1) & mask;
+		p->regval = __vcpu_sys_reg(vcpu, PMINTENSET_EL1);
 	}
 
 	return true;
@@ -891,7 +922,7 @@ static bool access_pmovs(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 			/* accessing PMOVSCLR_EL0 */
 			__vcpu_sys_reg(vcpu, PMOVSSET_EL0) &= ~(p->regval & mask);
 	} else {
-		p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0) & mask;
+		p->regval = __vcpu_sys_reg(vcpu, PMOVSSET_EL0);
 	}
 
 	return true;
@@ -944,16 +975,18 @@ static bool access_pmuserenr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 	  trap_wcr, reset_wcr, 0, 0,  get_wcr, set_wcr }
 
 #define PMU_SYS_REG(r)						\
-	SYS_DESC(r), .reset = reset_unknown, .visibility = pmu_visibility
+	SYS_DESC(r), .reset = reset_pmu_reg, .visibility = pmu_visibility
 
 /* Macro to expand the PMEVCNTRn_EL0 register */
 #define PMU_PMEVCNTR_EL0(n)						\
 	{ PMU_SYS_REG(SYS_PMEVCNTRn_EL0(n)),				\
+	  .reset = reset_pmevcntr,					\
 	  .access = access_pmu_evcntr, .reg = (PMEVCNTR0_EL0 + n), }
 
 /* Macro to expand the PMEVTYPERn_EL0 register */
 #define PMU_PMEVTYPER_EL0(n)						\
 	{ PMU_SYS_REG(SYS_PMEVTYPERn_EL0(n)),				\
+	  .reset = reset_pmevtyper,					\
 	  .access = access_pmu_evtyper, .reg = (PMEVTYPER0_EL0 + n), }
 
 static bool undef_access(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
@@ -1026,8 +1059,6 @@ static bool access_arch_timer(struct kvm_vcpu *vcpu,
 	return true;
 }
 
-#define FEATURE(x)	(GENMASK_ULL(x##_SHIFT + 3, x##_SHIFT))
-
 /* Read a sanitised cpufeature ID register by sys_reg_desc */
 static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 		struct sys_reg_desc const *r, bool raz)
@@ -1038,40 +1069,40 @@ static u64 read_id_reg(const struct kvm_vcpu *vcpu,
 	switch (id) {
 	case SYS_ID_AA64PFR0_EL1:
 		if (!vcpu_has_sve(vcpu))
-			val &= ~FEATURE(ID_AA64PFR0_SVE);
-		val &= ~FEATURE(ID_AA64PFR0_AMU);
-		val &= ~FEATURE(ID_AA64PFR0_CSV2);
-		val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2);
-		val &= ~FEATURE(ID_AA64PFR0_CSV3);
-		val |= FIELD_PREP(FEATURE(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3);
+			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_SVE);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_AMU);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV2), (u64)vcpu->kvm->arch.pfr0_csv2);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_CSV3), (u64)vcpu->kvm->arch.pfr0_csv3);
 		break;
 	case SYS_ID_AA64PFR1_EL1:
-		val &= ~FEATURE(ID_AA64PFR1_MTE);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_MTE);
 		if (kvm_has_mte(vcpu->kvm)) {
 			u64 pfr, mte;
 
 			pfr = read_sanitised_ftr_reg(SYS_ID_AA64PFR1_EL1);
 			mte = cpuid_feature_extract_unsigned_field(pfr, ID_AA64PFR1_MTE_SHIFT);
-			val |= FIELD_PREP(FEATURE(ID_AA64PFR1_MTE), mte);
+			val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR1_MTE), mte);
 		}
 		break;
 	case SYS_ID_AA64ISAR1_EL1:
 		if (!vcpu_has_ptrauth(vcpu))
-			val &= ~(FEATURE(ID_AA64ISAR1_APA) |
-				 FEATURE(ID_AA64ISAR1_API) |
-				 FEATURE(ID_AA64ISAR1_GPA) |
-				 FEATURE(ID_AA64ISAR1_GPI));
+			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_APA) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_API) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_GPA) |
+				 ARM64_FEATURE_MASK(ID_AA64ISAR1_GPI));
 		break;
 	case SYS_ID_AA64DFR0_EL1:
 		/* Limit debug to ARMv8.0 */
-		val &= ~FEATURE(ID_AA64DFR0_DEBUGVER);
-		val |= FIELD_PREP(FEATURE(ID_AA64DFR0_DEBUGVER), 6);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER);
+		val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64DFR0_DEBUGVER), 6);
 		/* Limit guests to PMUv3 for ARMv8.4 */
 		val = cpuid_feature_cap_perfmon_field(val,
 						      ID_AA64DFR0_PMUVER_SHIFT,
 						      kvm_vcpu_has_pmu(vcpu) ? ID_AA64DFR0_PMUVER_8_4 : 0);
 		/* Hide SPE from guests */
-		val &= ~FEATURE(ID_AA64DFR0_PMSVER);
+		val &= ~ARM64_FEATURE_MASK(ID_AA64DFR0_PMSVER);
 		break;
 	case SYS_ID_DFR0_EL1:
 		/* Limit guests to PMUv3 for ARMv8.4 */
@@ -1249,6 +1280,20 @@ static int set_raz_id_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
 	return __set_id_reg(vcpu, rd, uaddr, true);
 }
 
+static int set_wi_reg(struct kvm_vcpu *vcpu, const struct sys_reg_desc *rd,
+		      const struct kvm_one_reg *reg, void __user *uaddr)
+{
+	int err;
+	u64 val;
+
+	/* Perform the access even if we are going to ignore the value */
+	err = reg_from_user(&val, uaddr, sys_reg_to_index(rd));
+	if (err)
+		return err;
+
+	return 0;
+}
+
 static bool access_ctr(struct kvm_vcpu *vcpu, struct sys_reg_params *p,
 		       const struct sys_reg_desc *r)
 {
@@ -1592,16 +1637,21 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	  .access = access_pmcnten, .reg = PMCNTENSET_EL0 },
 	{ PMU_SYS_REG(SYS_PMOVSCLR_EL0),
 	  .access = access_pmovs, .reg = PMOVSSET_EL0 },
+	/*
+	 * PM_SWINC_EL0 is exposed to userspace as RAZ/WI, as it was
+	 * previously (and pointlessly) advertised in the past...
+	 */
 	{ PMU_SYS_REG(SYS_PMSWINC_EL0),
-	  .access = access_pmswinc, .reg = PMSWINC_EL0 },
+	  .get_user = get_raz_id_reg, .set_user = set_wi_reg,
+	  .access = access_pmswinc, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMSELR_EL0),
-	  .access = access_pmselr, .reg = PMSELR_EL0 },
+	  .access = access_pmselr, .reset = reset_pmselr, .reg = PMSELR_EL0 },
 	{ PMU_SYS_REG(SYS_PMCEID0_EL0),
 	  .access = access_pmceid, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMCEID1_EL0),
 	  .access = access_pmceid, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMCCNTR_EL0),
-	  .access = access_pmu_evcntr, .reg = PMCCNTR_EL0 },
+	  .access = access_pmu_evcntr, .reset = reset_unknown, .reg = PMCCNTR_EL0 },
 	{ PMU_SYS_REG(SYS_PMXEVTYPER_EL0),
 	  .access = access_pmu_evtyper, .reset = NULL },
 	{ PMU_SYS_REG(SYS_PMXEVCNTR_EL0),
@@ -2106,23 +2156,6 @@ static int check_sysreg_table(const struct sys_reg_desc *table, unsigned int n,
 	return 0;
 }
 
-static int match_sys_reg(const void *key, const void *elt)
-{
-	const unsigned long pval = (unsigned long)key;
-	const struct sys_reg_desc *r = elt;
-
-	return pval - reg_to_encoding(r);
-}
-
-static const struct sys_reg_desc *find_reg(const struct sys_reg_params *params,
-					 const struct sys_reg_desc table[],
-					 unsigned int num)
-{
-	unsigned long pval = reg_to_encoding(params);
-
-	return bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
-}
-
 int kvm_handle_cp14_load_store(struct kvm_vcpu *vcpu)
 {
 	kvm_inject_undefined(vcpu);
@@ -2365,13 +2398,8 @@ int kvm_handle_sys_reg(struct kvm_vcpu *vcpu)
 
 	trace_kvm_handle_sys_reg(esr);
 
-	params.Op0 = (esr >> 20) & 3;
-	params.Op1 = (esr >> 14) & 0x7;
-	params.CRn = (esr >> 10) & 0xf;
-	params.CRm = (esr >> 1) & 0xf;
-	params.Op2 = (esr >> 17) & 0x7;
+	params = esr_sys64_to_params(esr);
 	params.regval = vcpu_get_reg(vcpu, Rt);
-	params.is_write = !(esr & 1);
 
 	ret = emulate_sys_reg(vcpu, &params);
 
diff --git a/arch/arm64/kvm/sys_regs.h b/arch/arm64/kvm/sys_regs.h
index 9d0621417c2a..cc0cc95a0280 100644
--- a/arch/arm64/kvm/sys_regs.h
+++ b/arch/arm64/kvm/sys_regs.h
@@ -11,6 +11,12 @@
 #ifndef __ARM64_KVM_SYS_REGS_LOCAL_H__
 #define __ARM64_KVM_SYS_REGS_LOCAL_H__
 
+#include <linux/bsearch.h>
+
+#define reg_to_encoding(x)						\
+	sys_reg((u32)(x)->Op0, (u32)(x)->Op1,				\
+		(u32)(x)->CRn, (u32)(x)->CRm, (u32)(x)->Op2)
+
 struct sys_reg_params {
 	u8	Op0;
 	u8	Op1;
@@ -21,6 +27,14 @@ struct sys_reg_params {
 	bool	is_write;
 };
 
+#define esr_sys64_to_params(esr)                                               \
+	((struct sys_reg_params){ .Op0 = ((esr) >> 20) & 3,                    \
+				  .Op1 = ((esr) >> 14) & 0x7,                  \
+				  .CRn = ((esr) >> 10) & 0xf,                  \
+				  .CRm = ((esr) >> 1) & 0xf,                   \
+				  .Op2 = ((esr) >> 17) & 0x7,                  \
+				  .is_write = !((esr) & 1) })
+
 struct sys_reg_desc {
 	/* Sysreg string for debug */
 	const char *name;
@@ -152,6 +166,23 @@ static inline int cmp_sys_reg(const struct sys_reg_desc *i1,
 	return i1->Op2 - i2->Op2;
 }
 
+static inline int match_sys_reg(const void *key, const void *elt)
+{
+	const unsigned long pval = (unsigned long)key;
+	const struct sys_reg_desc *r = elt;
+
+	return pval - reg_to_encoding(r);
+}
+
+static inline const struct sys_reg_desc *
+find_reg(const struct sys_reg_params *params, const struct sys_reg_desc table[],
+	 unsigned int num)
+{
+	unsigned long pval = reg_to_encoding(params);
+
+	return __inline_bsearch((void *)pval, table, num, sizeof(table[0]), match_sys_reg);
+}
+
 const struct sys_reg_desc *find_reg_by_id(u64 id,
 					  struct sys_reg_params *params,
 					  const struct sys_reg_desc table[],
diff --git a/arch/arm64/kvm/trace_handle_exit.h b/arch/arm64/kvm/trace_handle_exit.h
index 8d78acc4fba7..064a58c19f48 100644
--- a/arch/arm64/kvm/trace_handle_exit.h
+++ b/arch/arm64/kvm/trace_handle_exit.h
@@ -78,13 +78,17 @@ TRACE_EVENT(kvm_arm_clear_debug,
 	TP_printk("flags: 0x%08x", __entry->guest_debug)
 );
 
+/*
+ * The dreg32 name is a leftover from a distant past. This will really
+ * output a 64bit value...
+ */
 TRACE_EVENT(kvm_arm_set_dreg32,
-	TP_PROTO(const char *name, __u32 value),
+	TP_PROTO(const char *name, __u64 value),
 	TP_ARGS(name, value),
 
 	TP_STRUCT__entry(
 		__field(const char *, name)
-		__field(__u32, value)
+		__field(__u64, value)
 	),
 
 	TP_fast_assign(
@@ -92,7 +96,7 @@ TRACE_EVENT(kvm_arm_set_dreg32,
 		__entry->value = value;
 	),
 
-	TP_printk("%s: 0x%08x", __entry->name, __entry->value)
+	TP_printk("%s: 0x%llx", __entry->name, __entry->value)
 );
 
 TRACE_DEFINE_SIZEOF(__u64);
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v2.c b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
index a016f07adc28..5f9014ae595b 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v2.c
@@ -282,7 +282,7 @@ static unsigned long vgic_mmio_read_vcpuif(struct kvm_vcpu *vcpu,
 	case GIC_CPU_PRIMASK:
 		/*
 		 * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the
-		 * the PMR field as GICH_VMCR.VMPriMask rather than
+		 * PMR field as GICH_VMCR.VMPriMask rather than
 		 * GICC_PMR.Priority, so we expose the upper five bits of
 		 * priority mask to userspace using the lower bits in the
 		 * unsigned long.
@@ -329,7 +329,7 @@ static void vgic_mmio_write_vcpuif(struct kvm_vcpu *vcpu,
 	case GIC_CPU_PRIMASK:
 		/*
 		 * Our KVM_DEV_TYPE_ARM_VGIC_V2 device ABI exports the
-		 * the PMR field as GICH_VMCR.VMPriMask rather than
+		 * PMR field as GICH_VMCR.VMPriMask rather than
 		 * GICC_PMR.Priority, so we expose the upper five bits of
 		 * priority mask to userspace using the lower bits in the
 		 * unsigned long.
diff --git a/arch/arm64/kvm/vgic/vgic-v2.c b/arch/arm64/kvm/vgic/vgic-v2.c
index 2c580204f1dc..95a18cec14a3 100644
--- a/arch/arm64/kvm/vgic/vgic-v2.c
+++ b/arch/arm64/kvm/vgic/vgic-v2.c
@@ -60,6 +60,7 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
 		u32 val = cpuif->vgic_lr[lr];
 		u32 cpuid, intid = val & GICH_LR_VIRTUALID;
 		struct vgic_irq *irq;
+		bool deactivated;
 
 		/* Extract the source vCPU id from the LR */
 		cpuid = val & GICH_LR_PHYSID_CPUID;
@@ -75,7 +76,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
 
 		raw_spin_lock(&irq->irq_lock);
 
-		/* Always preserve the active bit */
+		/* Always preserve the active bit, note deactivation */
+		deactivated = irq->active && !(val & GICH_LR_ACTIVE_BIT);
 		irq->active = !!(val & GICH_LR_ACTIVE_BIT);
 
 		if (irq->active && vgic_irq_is_sgi(intid))
@@ -96,36 +98,8 @@ void vgic_v2_fold_lr_state(struct kvm_vcpu *vcpu)
 		if (irq->config == VGIC_CONFIG_LEVEL && !(val & GICH_LR_STATE))
 			irq->pending_latch = false;
 
-		/*
-		 * Level-triggered mapped IRQs are special because we only
-		 * observe rising edges as input to the VGIC.
-		 *
-		 * If the guest never acked the interrupt we have to sample
-		 * the physical line and set the line level, because the
-		 * device state could have changed or we simply need to
-		 * process the still pending interrupt later.
-		 *
-		 * If this causes us to lower the level, we have to also clear
-		 * the physical active state, since we will otherwise never be
-		 * told when the interrupt becomes asserted again.
-		 *
-		 * Another case is when the interrupt requires a helping hand
-		 * on deactivation (no HW deactivation, for example).
-		 */
-		if (vgic_irq_is_mapped_level(irq)) {
-			bool resample = false;
-
-			if (val & GICH_LR_PENDING_BIT) {
-				irq->line_level = vgic_get_phys_line_level(irq);
-				resample = !irq->line_level;
-			} else if (vgic_irq_needs_resampling(irq) &&
-				   !(irq->active || irq->pending_latch)) {
-				resample = true;
-			}
-
-			if (resample)
-				vgic_irq_set_phys_active(irq, false);
-		}
+		/* Handle resampling for mapped interrupts if required */
+		vgic_irq_handle_resampling(irq, deactivated, val & GICH_LR_PENDING_BIT);
 
 		raw_spin_unlock(&irq->irq_lock);
 		vgic_put_irq(vcpu->kvm, irq);
diff --git a/arch/arm64/kvm/vgic/vgic-v3.c b/arch/arm64/kvm/vgic/vgic-v3.c
index 66004f61cd83..21a6207fb2ee 100644
--- a/arch/arm64/kvm/vgic/vgic-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-v3.c
@@ -46,6 +46,7 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
 		u32 intid, cpuid;
 		struct vgic_irq *irq;
 		bool is_v2_sgi = false;
+		bool deactivated;
 
 		cpuid = val & GICH_LR_PHYSID_CPUID;
 		cpuid >>= GICH_LR_PHYSID_CPUID_SHIFT;
@@ -68,7 +69,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
 
 		raw_spin_lock(&irq->irq_lock);
 
-		/* Always preserve the active bit */
+		/* Always preserve the active bit, note deactivation */
+		deactivated = irq->active && !(val & ICH_LR_ACTIVE_BIT);
 		irq->active = !!(val & ICH_LR_ACTIVE_BIT);
 
 		if (irq->active && is_v2_sgi)
@@ -89,36 +91,8 @@ void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu)
 		if (irq->config == VGIC_CONFIG_LEVEL && !(val & ICH_LR_STATE))
 			irq->pending_latch = false;
 
-		/*
-		 * Level-triggered mapped IRQs are special because we only
-		 * observe rising edges as input to the VGIC.
-		 *
-		 * If the guest never acked the interrupt we have to sample
-		 * the physical line and set the line level, because the
-		 * device state could have changed or we simply need to
-		 * process the still pending interrupt later.
-		 *
-		 * If this causes us to lower the level, we have to also clear
-		 * the physical active state, since we will otherwise never be
-		 * told when the interrupt becomes asserted again.
-		 *
-		 * Another case is when the interrupt requires a helping hand
-		 * on deactivation (no HW deactivation, for example).
-		 */
-		if (vgic_irq_is_mapped_level(irq)) {
-			bool resample = false;
-
-			if (val & ICH_LR_PENDING_BIT) {
-				irq->line_level = vgic_get_phys_line_level(irq);
-				resample = !irq->line_level;
-			} else if (vgic_irq_needs_resampling(irq) &&
-				   !(irq->active || irq->pending_latch)) {
-				resample = true;
-			}
-
-			if (resample)
-				vgic_irq_set_phys_active(irq, false);
-		}
+		/* Handle resampling for mapped interrupts if required */
+		vgic_irq_handle_resampling(irq, deactivated, val & ICH_LR_PENDING_BIT);
 
 		raw_spin_unlock(&irq->irq_lock);
 		vgic_put_irq(vcpu->kvm, irq);
diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
index 111bff47e471..5dad4996cfb2 100644
--- a/arch/arm64/kvm/vgic/vgic.c
+++ b/arch/arm64/kvm/vgic/vgic.c
@@ -106,7 +106,6 @@ struct vgic_irq *vgic_get_irq(struct kvm *kvm, struct kvm_vcpu *vcpu,
 	if (intid >= VGIC_MIN_LPI)
 		return vgic_get_lpi(kvm, intid);
 
-	WARN(1, "Looking up struct vgic_irq for reserved INTID");
 	return NULL;
 }
 
@@ -1022,3 +1021,41 @@ bool kvm_vgic_map_is_active(struct kvm_vcpu *vcpu, unsigned int vintid)
 
 	return map_is_active;
 }
+
+/*
+ * Level-triggered mapped IRQs are special because we only observe rising
+ * edges as input to the VGIC.
+ *
+ * If the guest never acked the interrupt we have to sample the physical
+ * line and set the line level, because the device state could have changed
+ * or we simply need to process the still pending interrupt later.
+ *
+ * We could also have entered the guest with the interrupt active+pending.
+ * On the next exit, we need to re-evaluate the pending state, as it could
+ * otherwise result in a spurious interrupt by injecting a now potentially
+ * stale pending state.
+ *
+ * If this causes us to lower the level, we have to also clear the physical
+ * active state, since we will otherwise never be told when the interrupt
+ * becomes asserted again.
+ *
+ * Another case is when the interrupt requires a helping hand on
+ * deactivation (no HW deactivation, for example).
+ */
+void vgic_irq_handle_resampling(struct vgic_irq *irq,
+				bool lr_deactivated, bool lr_pending)
+{
+	if (vgic_irq_is_mapped_level(irq)) {
+		bool resample = false;
+
+		if (unlikely(vgic_irq_needs_resampling(irq))) {
+			resample = !(irq->active || irq->pending_latch);
+		} else if (lr_pending || (lr_deactivated && irq->line_level)) {
+			irq->line_level = vgic_get_phys_line_level(irq);
+			resample = !irq->line_level;
+		}
+
+		if (resample)
+			vgic_irq_set_phys_active(irq, false);
+	}
+}
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
index dc1f3d1657ee..14a9218641f5 100644
--- a/arch/arm64/kvm/vgic/vgic.h
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -169,6 +169,8 @@ void vgic_irq_set_phys_active(struct vgic_irq *irq, bool active);
 bool vgic_queue_irq_unlock(struct kvm *kvm, struct vgic_irq *irq,
 			   unsigned long flags);
 void vgic_kick_vcpus(struct kvm *kvm);
+void vgic_irq_handle_resampling(struct vgic_irq *irq,
+				bool lr_deactivated, bool lr_pending);
 
 int vgic_check_ioaddr(struct kvm *kvm, phys_addr_t *ioaddr,
 		      phys_addr_t addr, phys_addr_t alignment);
diff --git a/arch/arm64/lib/Makefile b/arch/arm64/lib/Makefile
index 6dd56a49790a..0941180a86d3 100644
--- a/arch/arm64/lib/Makefile
+++ b/arch/arm64/lib/Makefile
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 lib-y		:= clear_user.o delay.o copy_from_user.o		\
-		   copy_to_user.o copy_in_user.o copy_page.o		\
+		   copy_to_user.o copy_page.o				\
 		   clear_page.o csum.o insn.o memchr.o memcpy.o		\
 		   memset.o memcmp.o strcmp.o strncmp.o strlen.o	\
 		   strnlen.o strchr.o strrchr.o tishift.o
diff --git a/arch/arm64/lib/copy_in_user.S b/arch/arm64/lib/copy_in_user.S
deleted file mode 100644
index dbea3799c3ef..000000000000
--- a/arch/arm64/lib/copy_in_user.S
+++ /dev/null
@@ -1,77 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copy from user space to user space
- *
- * Copyright (C) 2012 ARM Ltd.
- */
-
-#include <linux/linkage.h>
-
-#include <asm/asm-uaccess.h>
-#include <asm/assembler.h>
-#include <asm/cache.h>
-
-/*
- * Copy from user space to user space (alignment handled by the hardware)
- *
- * Parameters:
- *	x0 - to
- *	x1 - from
- *	x2 - n
- * Returns:
- *	x0 - bytes not copied
- */
-	.macro ldrb1 reg, ptr, val
-	user_ldst 9998f, ldtrb, \reg, \ptr, \val
-	.endm
-
-	.macro strb1 reg, ptr, val
-	user_ldst 9998f, sttrb, \reg, \ptr, \val
-	.endm
-
-	.macro ldrh1 reg, ptr, val
-	user_ldst 9997f, ldtrh, \reg, \ptr, \val
-	.endm
-
-	.macro strh1 reg, ptr, val
-	user_ldst 9997f, sttrh, \reg, \ptr, \val
-	.endm
-
-	.macro ldr1 reg, ptr, val
-	user_ldst 9997f, ldtr, \reg, \ptr, \val
-	.endm
-
-	.macro str1 reg, ptr, val
-	user_ldst 9997f, sttr, \reg, \ptr, \val
-	.endm
-
-	.macro ldp1 reg1, reg2, ptr, val
-	user_ldp 9997f, \reg1, \reg2, \ptr, \val
-	.endm
-
-	.macro stp1 reg1, reg2, ptr, val
-	user_stp 9997f, \reg1, \reg2, \ptr, \val
-	.endm
-
-end	.req	x5
-srcin	.req	x15
-SYM_FUNC_START(__arch_copy_in_user)
-	add	end, x0, x2
-	mov	srcin, x1
-#include "copy_template.S"
-	mov	x0, #0
-	ret
-SYM_FUNC_END(__arch_copy_in_user)
-EXPORT_SYMBOL(__arch_copy_in_user)
-
-	.section .fixup,"ax"
-	.align	2
-9997:	cmp	dst, dstin
-	b.ne	9998f
-	// Before being absolutely sure we couldn't copy anything, try harder
-USER(9998f, ldtrb tmp1w, [srcin])
-USER(9998f, sttrb tmp1w, [dst])
-	add	dst, dst, #1
-9998:	sub	x0, end, dst			// bytes not copied
-	ret
-	.previous
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index b16be52233c6..37a81754d9b6 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -30,6 +30,7 @@
 #include <linux/crash_dump.h>
 #include <linux/hugetlb.h>
 #include <linux/acpi_iort.h>
+#include <linux/kmemleak.h>
 
 #include <asm/boot.h>
 #include <asm/fixmap.h>
@@ -101,6 +102,11 @@ static void __init reserve_crashkernel(void)
 	pr_info("crashkernel reserved: 0x%016llx - 0x%016llx (%lld MB)\n",
 		crash_base, crash_base + crash_size, crash_size >> 20);
 
+	/*
+	 * The crashkernel memory will be removed from the kernel linear
+	 * map. Inform kmemleak so that it won't try to access it.
+	 */
+	kmemleak_ignore_phys(crash_base);
 	crashk_res.start = crash_base;
 	crashk_res.end = crash_base + crash_size - 1;
 }
@@ -222,7 +228,21 @@ early_param("mem", early_mem);
 
 void __init arm64_memblock_init(void)
 {
-	const s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+	s64 linear_region_size = PAGE_END - _PAGE_OFFSET(vabits_actual);
+
+	/*
+	 * Corner case: 52-bit VA capable systems running KVM in nVHE mode may
+	 * be limited in their ability to support a linear map that exceeds 51
+	 * bits of VA space, depending on the placement of the ID map. Given
+	 * that the placement of the ID map may be randomized, let's simply
+	 * limit the kernel's linear map to 51 bits as well if we detect this
+	 * configuration.
+	 */
+	if (IS_ENABLED(CONFIG_KVM) && vabits_actual == 52 &&
+	    is_hyp_mode_available() && !is_kernel_in_hyp_mode()) {
+		pr_info("Capping linear region to 51 bits for KVM in nVHE mode on LVA capable hardware.\n");
+		linear_region_size = min_t(u64, linear_region_size, BIT(51));
+	}
 
 	/* Remove memory above our supported physical address size */
 	memblock_remove(1ULL << PHYS_MASK_SHIFT, ULLONG_MAX);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 9ff0de1b2b93..cfd9deb347c3 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -1502,8 +1502,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	return ret;
 }
 
-void arch_remove_memory(int nid, u64 start, u64 size,
-			struct vmem_altmap *altmap)
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/csky/Kconfig b/arch/csky/Kconfig
index 2716f6395ba7..9d4d898df76b 100644
--- a/arch/csky/Kconfig
+++ b/arch/csky/Kconfig
@@ -82,6 +82,7 @@ config CSKY
 	select PCI_SYSCALL if PCI
 	select PCI_MSI if PCI
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 
 config LOCKDEP_SUPPORT
 	def_bool y
@@ -139,9 +140,6 @@ config STACKTRACE_SUPPORT
 config TIME_LOW_RES
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config CPU_TLB_SIZE
 	int
 	default "128"	if (CPU_CK610 || CPU_CK807 || CPU_CK810)
diff --git a/arch/h8300/kernel/traps.c b/arch/h8300/kernel/traps.c
index 5d8b969cd8f3..bdbe988d8dbc 100644
--- a/arch/h8300/kernel/traps.c
+++ b/arch/h8300/kernel/traps.c
@@ -39,10 +39,6 @@ void __init base_trap_init(void)
 {
 }
 
-void __init trap_init(void)
-{
-}
-
 asmlinkage void set_esp0(unsigned long ssp)
 {
 	current->thread.esp0 = ssp;
diff --git a/arch/hexagon/Kconfig b/arch/hexagon/Kconfig
index aab1a40eb653..15dd8f38b698 100644
--- a/arch/hexagon/Kconfig
+++ b/arch/hexagon/Kconfig
@@ -32,6 +32,7 @@ config HEXAGON
 	select GENERIC_CPU_DEVICES
 	select SET_FS
 	select ARCH_WANT_LD_ORPHAN_WARN
+	select TRACE_IRQFLAGS_SUPPORT
 	help
 	  Qualcomm Hexagon is a processor architecture designed for high
 	  performance and low power across a wide variety of applications.
@@ -53,9 +54,6 @@ config EARLY_PRINTK
 config MMU
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config GENERIC_CSUM
 	def_bool y
 
diff --git a/arch/hexagon/kernel/traps.c b/arch/hexagon/kernel/traps.c
index 904134b37232..edfc35dafeb1 100644
--- a/arch/hexagon/kernel/traps.c
+++ b/arch/hexagon/kernel/traps.c
@@ -28,10 +28,6 @@
 #define TRAP_SYSCALL	1
 #define TRAP_DEBUG	0xdb
 
-void __init trap_init(void)
-{
-}
-
 #ifdef CONFIG_GENERIC_BUG
 /* Maybe should resemble arch/sh/kernel/traps.c ?? */
 int is_valid_bugaddr(unsigned long addr)
diff --git a/arch/ia64/mm/init.c b/arch/ia64/mm/init.c
index 064a967a7b6e..5c6da8d83c1a 100644
--- a/arch/ia64/mm/init.c
+++ b/arch/ia64/mm/init.c
@@ -484,8 +484,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	return ret;
 }
 
-void arch_remove_memory(int nid, u64 start, u64 size,
-			struct vmem_altmap *altmap)
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/microblaze/Kbuild b/arch/microblaze/Kbuild
index a4e40e534e6a..a1c597889319 100644
--- a/arch/microblaze/Kbuild
+++ b/arch/microblaze/Kbuild
@@ -1 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0-only
+obj-y			+= kernel/
+obj-y			+= mm/
+obj-$(CONFIG_PCI)	+= pci/
+obj-y			+= boot/dts/
diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig
index 14a67a42fcae..59798e43cdb0 100644
--- a/arch/microblaze/Kconfig
+++ b/arch/microblaze/Kconfig
@@ -44,6 +44,7 @@ config MICROBLAZE
 	select SPARSE_IRQ
 	select SET_FS
 	select ZONE_DMA
+	select TRACE_IRQFLAGS_SUPPORT
 
 # Endianness selection
 choice
diff --git a/arch/microblaze/Kconfig.debug b/arch/microblaze/Kconfig.debug
index 865527ac332a..a4e40e534e6a 100644
--- a/arch/microblaze/Kconfig.debug
+++ b/arch/microblaze/Kconfig.debug
@@ -1,6 +1 @@
 # SPDX-License-Identifier: GPL-2.0-only
-# For a description of the syntax of this configuration file,
-# see Documentation/kbuild/kconfig-language.rst.
-
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index 6d4af39e3890..9adc6b6434df 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -50,17 +50,12 @@ KBUILD_CFLAGS += -ffixed-r31 $(CPUFLAGS-y) $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 head-y := arch/microblaze/kernel/head.o
 libs-y += arch/microblaze/lib/
-core-y += arch/microblaze/kernel/
-core-y += arch/microblaze/mm/
-core-$(CONFIG_PCI) += arch/microblaze/pci/
 
 boot := arch/microblaze/boot
 
 # Are we making a simpleImage.<boardname> target? If so, crack out the boardname
 DTB:=$(subst simpleImage.,,$(filter simpleImage.%, $(MAKECMDGOALS)))
 
-core-y	+= $(boot)/dts/
-
 export DTB
 
 all: linux.bin
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 9b8ff6c2c1e3..771ca53af06d 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -98,6 +98,7 @@ config MIPS
 	select PCI_MSI_ARCH_FALLBACKS if PCI_MSI
 	select RTC_LIB
 	select SYSCTL_EXCEPTION_TRACE
+	select TRACE_IRQFLAGS_SUPPORT
 	select VIRT_TO_BUS
 	select ARCH_HAS_ELFCORE_COMPAT
 
diff --git a/arch/mips/Kconfig.debug b/arch/mips/Kconfig.debug
index 43dbf5930796..f4ae7900fcd3 100644
--- a/arch/mips/Kconfig.debug
+++ b/arch/mips/Kconfig.debug
@@ -1,9 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
 config EARLY_PRINTK
 	bool "Early printk" if EXPERT
 	depends on SYS_HAS_EARLY_PRINTK
diff --git a/arch/mips/cavium-octeon/octeon-memcpy.S b/arch/mips/cavium-octeon/octeon-memcpy.S
index 600d018cf354..0a515cde1c18 100644
--- a/arch/mips/cavium-octeon/octeon-memcpy.S
+++ b/arch/mips/cavium-octeon/octeon-memcpy.S
@@ -154,8 +154,6 @@ FEXPORT(__raw_copy_from_user)
 EXPORT_SYMBOL(__raw_copy_from_user)
 FEXPORT(__raw_copy_to_user)
 EXPORT_SYMBOL(__raw_copy_to_user)
-FEXPORT(__raw_copy_in_user)
-EXPORT_SYMBOL(__raw_copy_in_user)
 	/*
 	 * Note: dst & src may be unaligned, len may be 0
 	 * Temps
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index aaf9d5e0aa2c..791894c4d8fb 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -116,7 +116,6 @@ CONFIG_8139TOO=y
 CONFIG_R8169=y
 CONFIG_USB_USBNET=m
 CONFIG_USB_NET_CDC_EEM=m
-CONFIG_INPUT_POLLDEV=m
 CONFIG_INPUT_EVDEV=y
 # CONFIG_MOUSE_PS2_ALPS is not set
 # CONFIG_MOUSE_PS2_LOGIPS2PP is not set
diff --git a/arch/mips/configs/pic32mzda_defconfig b/arch/mips/configs/pic32mzda_defconfig
index 63fe2da1b37f..fd567247adc7 100644
--- a/arch/mips/configs/pic32mzda_defconfig
+++ b/arch/mips/configs/pic32mzda_defconfig
@@ -34,7 +34,6 @@ CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_SCAN_ASYNC=y
 # CONFIG_SCSI_LOWLEVEL is not set
 CONFIG_INPUT_LEDS=m
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_MOUSEDEV=m
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_EVBUG=m
diff --git a/arch/mips/configs/rt305x_defconfig b/arch/mips/configs/rt305x_defconfig
index fec5851c164b..eb359db15dba 100644
--- a/arch/mips/configs/rt305x_defconfig
+++ b/arch/mips/configs/rt305x_defconfig
@@ -90,7 +90,6 @@ CONFIG_PPPOE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_ISDN=y
 CONFIG_INPUT=m
-CONFIG_INPUT_POLLDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
diff --git a/arch/mips/configs/xway_defconfig b/arch/mips/configs/xway_defconfig
index 9abbc0debc2a..eeb689f715cb 100644
--- a/arch/mips/configs/xway_defconfig
+++ b/arch/mips/configs/xway_defconfig
@@ -96,7 +96,6 @@ CONFIG_PPPOE=m
 CONFIG_PPP_ASYNC=m
 CONFIG_ISDN=y
 CONFIG_INPUT=m
-CONFIG_INPUT_POLLDEV=m
 # CONFIG_KEYBOARD_ATKBD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_MISC=y
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 53f015a1b0a7..bbb3bc5a42fd 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -96,14 +96,6 @@ struct compat_statfs {
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = (struct pt_regs *)
-		((unsigned long) current_thread_info() + THREAD_SIZE - 32) - 1;
-
-	return (void __user *) (regs->regs[29] - len);
-}
-
 struct compat_ipc64_perm {
 	compat_key_t key;
 	__compat_uid32_t uid;
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 783fecce65c8..f8f74f9f5883 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -428,7 +428,6 @@ do {									\
 
 extern size_t __raw_copy_from_user(void *__to, const void *__from, size_t __n);
 extern size_t __raw_copy_to_user(void *__to, const void *__from, size_t __n);
-extern size_t __raw_copy_in_user(void *__to, const void *__from, size_t __n);
 
 static inline unsigned long
 raw_copy_from_user(void *to, const void __user *from, unsigned long n)
@@ -480,31 +479,6 @@ raw_copy_to_user(void __user *to, const void *from, unsigned long n)
 #define INLINE_COPY_FROM_USER
 #define INLINE_COPY_TO_USER
 
-static inline unsigned long
-raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
-{
-	register void __user *__cu_to_r __asm__("$4");
-	register const void __user *__cu_from_r __asm__("$5");
-	register long __cu_len_r __asm__("$6");
-
-	__cu_to_r = to;
-	__cu_from_r = from;
-	__cu_len_r = n;
-
-	__asm__ __volatile__(
-		".set\tnoreorder\n\t"
-		__MODULE_JAL(__raw_copy_in_user)
-		".set\tnoat\n\t"
-		__UA_ADDU "\t$1, %1, %2\n\t"
-		".set\tat\n\t"
-		".set\treorder"
-		: "+r" (__cu_to_r), "+r" (__cu_from_r), "+r" (__cu_len_r)
-		:
-		: "$8", "$9", "$10", "$11", "$12", "$14", "$15", "$24", "$31",
-		  DADDI_SCRATCH, "memory");
-	return __cu_len_r;
-}
-
 extern __kernel_size_t __bzero(void __user *addr, __kernel_size_t size);
 
 /*
diff --git a/arch/mips/kernel/syscalls/syscall_n32.tbl b/arch/mips/kernel/syscalls/syscall_n32.tbl
index 56c8d3cf42ed..70e32de2bcaa 100644
--- a/arch/mips/kernel/syscalls/syscall_n32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_n32.tbl
@@ -239,9 +239,9 @@
 228	n32	clock_nanosleep			sys_clock_nanosleep_time32
 229	n32	tgkill				sys_tgkill
 230	n32	utimes				sys_utimes_time32
-231	n32	mbind				compat_sys_mbind
-232	n32	get_mempolicy			compat_sys_get_mempolicy
-233	n32	set_mempolicy			compat_sys_set_mempolicy
+231	n32	mbind				sys_mbind
+232	n32	get_mempolicy			sys_get_mempolicy
+233	n32	set_mempolicy			sys_set_mempolicy
 234	n32	mq_open				compat_sys_mq_open
 235	n32	mq_unlink			sys_mq_unlink
 236	n32	mq_timedsend			sys_mq_timedsend_time32
@@ -258,7 +258,7 @@
 247	n32	inotify_init			sys_inotify_init
 248	n32	inotify_add_watch		sys_inotify_add_watch
 249	n32	inotify_rm_watch		sys_inotify_rm_watch
-250	n32	migrate_pages			compat_sys_migrate_pages
+250	n32	migrate_pages			sys_migrate_pages
 251	n32	openat				sys_openat
 252	n32	mkdirat				sys_mkdirat
 253	n32	mknodat				sys_mknodat
@@ -279,7 +279,7 @@
 268	n32	sync_file_range			sys_sync_file_range
 269	n32	tee				sys_tee
 270	n32	vmsplice			sys_vmsplice
-271	n32	move_pages			compat_sys_move_pages
+271	n32	move_pages			sys_move_pages
 272	n32	set_robust_list			compat_sys_set_robust_list
 273	n32	get_robust_list			compat_sys_get_robust_list
 274	n32	kexec_load			compat_sys_kexec_load
diff --git a/arch/mips/kernel/syscalls/syscall_o32.tbl b/arch/mips/kernel/syscalls/syscall_o32.tbl
index 201237fd0f43..a61c35edaa74 100644
--- a/arch/mips/kernel/syscalls/syscall_o32.tbl
+++ b/arch/mips/kernel/syscalls/syscall_o32.tbl
@@ -279,9 +279,9 @@
 265	o32	clock_nanosleep			sys_clock_nanosleep_time32
 266	o32	tgkill				sys_tgkill
 267	o32	utimes				sys_utimes_time32
-268	o32	mbind				sys_mbind			compat_sys_mbind
-269	o32	get_mempolicy			sys_get_mempolicy		compat_sys_get_mempolicy
-270	o32	set_mempolicy			sys_set_mempolicy		compat_sys_set_mempolicy
+268	o32	mbind				sys_mbind
+269	o32	get_mempolicy			sys_get_mempolicy
+270	o32	set_mempolicy			sys_set_mempolicy
 271	o32	mq_open				sys_mq_open			compat_sys_mq_open
 272	o32	mq_unlink			sys_mq_unlink
 273	o32	mq_timedsend			sys_mq_timedsend_time32
@@ -298,7 +298,7 @@
 284	o32	inotify_init			sys_inotify_init
 285	o32	inotify_add_watch		sys_inotify_add_watch
 286	o32	inotify_rm_watch		sys_inotify_rm_watch
-287	o32	migrate_pages			sys_migrate_pages		compat_sys_migrate_pages
+287	o32	migrate_pages			sys_migrate_pages
 288	o32	openat				sys_openat			compat_sys_openat
 289	o32	mkdirat				sys_mkdirat
 290	o32	mknodat				sys_mknodat
@@ -319,7 +319,7 @@
 305	o32	sync_file_range			sys_sync_file_range		sys32_sync_file_range
 306	o32	tee				sys_tee
 307	o32	vmsplice			sys_vmsplice
-308	o32	move_pages			sys_move_pages			compat_sys_move_pages
+308	o32	move_pages			sys_move_pages
 309	o32	set_robust_list			sys_set_robust_list		compat_sys_set_robust_list
 310	o32	get_robust_list			sys_get_robust_list		compat_sys_get_robust_list
 311	o32	kexec_load			sys_kexec_load			compat_sys_kexec_load
diff --git a/arch/mips/kvm/mips.c b/arch/mips/kvm/mips.c
index af9dd029a4e1..75c6f264c626 100644
--- a/arch/mips/kvm/mips.c
+++ b/arch/mips/kvm/mips.c
@@ -41,8 +41,6 @@
 const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	KVM_GENERIC_VM_STATS()
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -85,8 +83,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, vz_cpucfg_exits),
 #endif
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
diff --git a/arch/mips/kvm/vz.c b/arch/mips/kvm/vz.c
index 43cad10b877d..4adca5abbc72 100644
--- a/arch/mips/kvm/vz.c
+++ b/arch/mips/kvm/vz.c
@@ -388,7 +388,6 @@ static void _kvm_vz_restore_htimer(struct kvm_vcpu *vcpu,
 				   u32 compare, u32 cause)
 {
 	u32 start_count, after_count;
-	ktime_t freeze_time;
 	unsigned long flags;
 
 	/*
@@ -396,7 +395,7 @@ static void _kvm_vz_restore_htimer(struct kvm_vcpu *vcpu,
 	 * this with interrupts disabled to avoid latency.
 	 */
 	local_irq_save(flags);
-	freeze_time = kvm_mips_freeze_hrtimer(vcpu, &start_count);
+	kvm_mips_freeze_hrtimer(vcpu, &start_count);
 	write_c0_gtoffset(start_count - read_c0_count());
 	local_irq_restore(flags);
 
diff --git a/arch/mips/lib/memcpy.S b/arch/mips/lib/memcpy.S
index e19fb98b5d38..277c32296636 100644
--- a/arch/mips/lib/memcpy.S
+++ b/arch/mips/lib/memcpy.S
@@ -666,8 +666,6 @@ FEXPORT(__raw_copy_from_user)
 EXPORT_SYMBOL(__raw_copy_from_user)
 FEXPORT(__raw_copy_to_user)
 EXPORT_SYMBOL(__raw_copy_to_user)
-FEXPORT(__raw_copy_in_user)
-EXPORT_SYMBOL(__raw_copy_in_user)
 #endif
 	/* Legacy Mode, user <-> user */
 	__BUILD_COPY_USER LEGACY_MODE USEROP USEROP
@@ -703,13 +701,4 @@ EXPORT_SYMBOL(__raw_copy_to_user)
 __BUILD_COPY_USER EVA_MODE KERNELOP USEROP
 END(__raw_copy_to_user)
 
-/*
- * __copy_in_user (EVA)
- */
-
-LEAF(__raw_copy_in_user)
-EXPORT_SYMBOL(__raw_copy_in_user)
-__BUILD_COPY_USER EVA_MODE USEROP USEROP
-END(__raw_copy_in_user)
-
 #endif
diff --git a/arch/nds32/Kconfig b/arch/nds32/Kconfig
index 9c9f3877abf9..aea26e739543 100644
--- a/arch/nds32/Kconfig
+++ b/arch/nds32/Kconfig
@@ -46,6 +46,7 @@ config NDS32
 	select HAVE_FTRACE_MCOUNT_RECORD
 	select HAVE_DYNAMIC_FTRACE
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 	help
 	  Andes(nds32) Linux support.
 
@@ -62,9 +63,6 @@ config GENERIC_LOCKBREAK
 	def_bool y
 	depends on PREEMPTION
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config STACKTRACE_SUPPORT
 	def_bool y
 
diff --git a/arch/nds32/kernel/setup.c b/arch/nds32/kernel/setup.c
index 41725eaf8bac..b3d34d646652 100644
--- a/arch/nds32/kernel/setup.c
+++ b/arch/nds32/kernel/setup.c
@@ -244,7 +244,6 @@ static void __init setup_memory(void)
 	unsigned long ram_start_pfn;
 	unsigned long free_ram_start_pfn;
 	phys_addr_t memory_start, memory_end;
-	struct memblock_region *region;
 
 	memory_end = memory_start = 0;
 
diff --git a/arch/nds32/kernel/traps.c b/arch/nds32/kernel/traps.c
index ee0d9ae192a5..f06421c645af 100644
--- a/arch/nds32/kernel/traps.c
+++ b/arch/nds32/kernel/traps.c
@@ -183,11 +183,6 @@ void __pgd_error(const char *file, int line, unsigned long val)
 }
 
 extern char *exception_vector, *exception_vector_end;
-void __init trap_init(void)
-{
-	return;
-}
-
 void __init early_trap_init(void)
 {
 	unsigned long ivb = 0;
diff --git a/arch/nios2/Kconfig b/arch/nios2/Kconfig
index 3efe5533ea1c..33fd06f5fa41 100644
--- a/arch/nios2/Kconfig
+++ b/arch/nios2/Kconfig
@@ -41,9 +41,6 @@ config NO_IOPORT_MAP
 config FPU
 	def_bool n
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool n
-
 menu "Kernel features"
 
 source "kernel/Kconfig.hz"
diff --git a/arch/nios2/kernel/traps.c b/arch/nios2/kernel/traps.c
index b172da4eb1a9..596986a74a26 100644
--- a/arch/nios2/kernel/traps.c
+++ b/arch/nios2/kernel/traps.c
@@ -105,11 +105,6 @@ void show_stack(struct task_struct *task, unsigned long *stack,
 	printk("%s\n", loglvl);
 }
 
-void __init trap_init(void)
-{
-	/* Nothing to do here */
-}
-
 /* Breakpoint handler */
 asmlinkage void breakpoint_c(struct pt_regs *fp)
 {
diff --git a/arch/openrisc/Kconfig b/arch/openrisc/Kconfig
index 50035a9816c8..e804026b4797 100644
--- a/arch/openrisc/Kconfig
+++ b/arch/openrisc/Kconfig
@@ -37,6 +37,7 @@ config OPENRISC
 	select GENERIC_IRQ_MULTI_HANDLER
 	select MMU_GATHER_NO_RANGE if MMU
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 
 config CPU_BIG_ENDIAN
 	def_bool y
@@ -50,9 +51,6 @@ config GENERIC_HWEIGHT
 config NO_IOPORT_MAP
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 # For now, use generic checksum functions
 #These can be reimplemented in assembly later if so inclined
 config GENERIC_CSUM
diff --git a/arch/openrisc/kernel/traps.c b/arch/openrisc/kernel/traps.c
index 4d61333c2623..aa1e709405ac 100644
--- a/arch/openrisc/kernel/traps.c
+++ b/arch/openrisc/kernel/traps.c
@@ -231,11 +231,6 @@ void unhandled_exception(struct pt_regs *regs, int ea, int vector)
 	die("Oops", regs, 9);
 }
 
-void __init trap_init(void)
-{
-	/* Nothing needs to be done */
-}
-
 asmlinkage void do_trap(struct pt_regs *regs, unsigned long address)
 {
 	force_sig_fault(SIGTRAP, TRAP_BRKPT, (void __user *)regs->pc);
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 95d4bbf4e455..4742b6f169b7 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -10,7 +10,6 @@ config PARISC
 	select ARCH_HAS_ELF_RANDOMIZE
 	select ARCH_HAS_STRICT_KERNEL_RWX
 	select ARCH_HAS_UBSAN_SANITIZE_ALL
-	select ARCH_HAS_STRNLEN_USER
 	select ARCH_NO_SG_CHAIN
 	select ARCH_SUPPORTS_HUGETLBFS if PA20
 	select ARCH_SUPPORTS_MEMORY_FAILURE
@@ -65,7 +64,7 @@ config PARISC
 	select HAVE_KPROBES_ON_FTRACE
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_SOFTIRQ_ON_OWN_STACK if IRQSTACKS
-	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 
 	help
 	  The PA-RISC microprocessor is designed by Hewlett-Packard and used
diff --git a/arch/parisc/Kconfig.debug b/arch/parisc/Kconfig.debug
index 1478ded0e247..f66554cd5c45 100644
--- a/arch/parisc/Kconfig.debug
+++ b/arch/parisc/Kconfig.debug
@@ -1,4 +1 @@
 # SPDX-License-Identifier: GPL-2.0
-
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
diff --git a/arch/parisc/boot/compressed/Makefile b/arch/parisc/boot/compressed/Makefile
index dff453687530..9fe54878167d 100644
--- a/arch/parisc/boot/compressed/Makefile
+++ b/arch/parisc/boot/compressed/Makefile
@@ -26,7 +26,7 @@ endif
 OBJECTS += $(obj)/head.o $(obj)/real2.o $(obj)/firmware.o $(obj)/misc.o $(obj)/piggy.o
 
 LDFLAGS_vmlinux := -X -e startup --as-needed -T
-$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS) $(LIBGCC)
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(OBJECTS) $(LIBGCC) FORCE
 	$(call if_changed,ld)
 
 sed-sizes := -e 's/^\([0-9a-fA-F]*\) . \(__bss_start\|_end\|parisc_kernel_start\)$$/\#define SZ\2 0x\1/p'
@@ -34,7 +34,7 @@ sed-sizes := -e 's/^\([0-9a-fA-F]*\) . \(__bss_start\|_end\|parisc_kernel_start\
 quiet_cmd_sizes = GEN $@
       cmd_sizes = $(NM) $< | sed -n $(sed-sizes) > $@
 
-$(obj)/sizes.h: vmlinux
+$(obj)/sizes.h: vmlinux FORCE
 	$(call if_changed,sizes)
 
 AFLAGS_head.o += -I$(objtree)/$(obj) -DBOOTLOADER
@@ -70,19 +70,19 @@ suffix-$(CONFIG_KERNEL_LZMA)  := lzma
 suffix-$(CONFIG_KERNEL_LZO)  := lzo
 suffix-$(CONFIG_KERNEL_XZ)  := xz
 
-$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lz4)
-$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzma)
-$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,lzo)
-$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y)
+$(obj)/vmlinux.bin.xz: $(vmlinux.bin.all-y) FORCE
 	$(call if_changed,xzkern)
 
 LDFLAGS_piggy.o := -r --format binary --oformat $(LD_BFD) -T
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y)
+$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix-y) FORCE
 	$(call if_changed,ld)
diff --git a/arch/parisc/configs/generic-32bit_defconfig b/arch/parisc/configs/generic-32bit_defconfig
index 7611d48c599e..dd14e3131325 100644
--- a/arch/parisc/configs/generic-32bit_defconfig
+++ b/arch/parisc/configs/generic-32bit_defconfig
@@ -111,7 +111,6 @@ CONFIG_PPP_BSDCOMP=m
 CONFIG_PPP_DEFLATE=m
 CONFIG_PPPOE=m
 # CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=y
 CONFIG_KEYBOARD_HIL_OLD=m
 CONFIG_KEYBOARD_HIL=m
 CONFIG_MOUSE_SERIAL=y
diff --git a/arch/parisc/include/asm/compat.h b/arch/parisc/include/asm/compat.h
index b5d90e82b65d..c04f5a637c39 100644
--- a/arch/parisc/include/asm/compat.h
+++ b/arch/parisc/include/asm/compat.h
@@ -163,12 +163,6 @@ struct compat_shmid64_ds {
 #define COMPAT_ELF_NGREG 80
 typedef compat_ulong_t compat_elf_gregset_t[COMPAT_ELF_NGREG];
 
-static __inline__ void __user *arch_compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = &current->thread.regs;
-	return (void __user *)regs->gr[30];
-}
-
 static inline int __is_compat_task(struct task_struct *t)
 {
 	return test_tsk_thread_flag(t, TIF_32BIT);
diff --git a/arch/parisc/include/asm/processor.h b/arch/parisc/include/asm/processor.h
index b5fbcd2c1780..eeb7da064289 100644
--- a/arch/parisc/include/asm/processor.h
+++ b/arch/parisc/include/asm/processor.h
@@ -101,10 +101,6 @@ DECLARE_PER_CPU(struct cpuinfo_parisc, cpu_data);
 
 #define CPU_HVERSION ((boot_cpu_data.hversion >> 4) & 0x0FFF)
 
-typedef struct {
-	int seg;  
-} mm_segment_t;
-
 #define ARCH_MIN_TASKALIGN	8
 
 struct thread_struct {
diff --git a/arch/parisc/include/asm/rt_sigframe.h b/arch/parisc/include/asm/rt_sigframe.h
index 2b3010ade00e..4b9e3d707571 100644
--- a/arch/parisc/include/asm/rt_sigframe.h
+++ b/arch/parisc/include/asm/rt_sigframe.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_PARISC_RT_SIGFRAME_H
 #define _ASM_PARISC_RT_SIGFRAME_H
 
-#define SIGRETURN_TRAMP 4
+#define SIGRETURN_TRAMP 3
 #define SIGRESTARTBLOCK_TRAMP 5 
 #define TRAMP_SIZE (SIGRETURN_TRAMP + SIGRESTARTBLOCK_TRAMP)
 
diff --git a/arch/parisc/include/asm/thread_info.h b/arch/parisc/include/asm/thread_info.h
index 0bd38a972cea..00ad50fef769 100644
--- a/arch/parisc/include/asm/thread_info.h
+++ b/arch/parisc/include/asm/thread_info.h
@@ -11,7 +11,6 @@
 struct thread_info {
 	struct task_struct *task;	/* main task structure */
 	unsigned long flags;		/* thread_info flags (see TIF_*) */
-	mm_segment_t addr_limit;	/* user-level address space limit */
 	__u32 cpu;			/* current CPU */
 	int preempt_count;		/* 0=premptable, <0=BUG; will also serve as bh-counter */
 };
@@ -21,7 +20,6 @@ struct thread_info {
 	.task		= &tsk,			\
 	.flags		= 0,			\
 	.cpu		= 0,			\
-	.addr_limit	= KERNEL_DS,		\
 	.preempt_count	= INIT_PREEMPT_COUNT,	\
 }
 
diff --git a/arch/parisc/include/asm/uaccess.h b/arch/parisc/include/asm/uaccess.h
index ed2cd4fb479b..192ad9e11b25 100644
--- a/arch/parisc/include/asm/uaccess.h
+++ b/arch/parisc/include/asm/uaccess.h
@@ -11,14 +11,6 @@
 #include <linux/bug.h>
 #include <linux/string.h>
 
-#define KERNEL_DS	((mm_segment_t){0})
-#define USER_DS 	((mm_segment_t){1})
-
-#define uaccess_kernel() (get_fs().seg == KERNEL_DS.seg)
-
-#define get_fs()	(current_thread_info()->addr_limit)
-#define set_fs(x)	(current_thread_info()->addr_limit = (x))
-
 /*
  * Note that since kernel addresses are in a separate address space on
  * parisc, we don't need to do anything for access_ok().
@@ -33,11 +25,11 @@
 #define get_user __get_user
 
 #if !defined(CONFIG_64BIT)
-#define LDD_USER(val, ptr)	__get_user_asm64(val, ptr)
-#define STD_USER(x, ptr)	__put_user_asm64(x, ptr)
+#define LDD_USER(sr, val, ptr)	__get_user_asm64(sr, val, ptr)
+#define STD_USER(sr, x, ptr)	__put_user_asm64(sr, x, ptr)
 #else
-#define LDD_USER(val, ptr)	__get_user_asm(val, "ldd", ptr)
-#define STD_USER(x, ptr)	__put_user_asm("std", x, ptr)
+#define LDD_USER(sr, val, ptr)	__get_user_asm(sr, val, "ldd", ptr)
+#define STD_USER(sr, x, ptr)	__put_user_asm(sr, "std", x, ptr)
 #endif
 
 /*
@@ -67,28 +59,15 @@ struct exception_table_entry {
 #define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
 	ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
 
-/*
- * load_sr2() preloads the space register %%sr2 - based on the value of
- * get_fs() - with either a value of 0 to access kernel space (KERNEL_DS which
- * is 0), or with the current value of %%sr3 to access user space (USER_DS)
- * memory. The following __get_user_asm() and __put_user_asm() functions have
- * %%sr2 hard-coded to access the requested memory.
- */
-#define load_sr2() \
-	__asm__(" or,=  %0,%%r0,%%r0\n\t"	\
-		" mfsp %%sr3,%0\n\t"		\
-		" mtsp %0,%%sr2\n\t"		\
-		: : "r"(get_fs()) : )
-
-#define __get_user_internal(val, ptr)			\
+#define __get_user_internal(sr, val, ptr)		\
 ({							\
 	register long __gu_err __asm__ ("r8") = 0;	\
 							\
 	switch (sizeof(*(ptr))) {			\
-	case 1: __get_user_asm(val, "ldb", ptr); break;	\
-	case 2: __get_user_asm(val, "ldh", ptr); break; \
-	case 4: __get_user_asm(val, "ldw", ptr); break; \
-	case 8: LDD_USER(val, ptr); break;		\
+	case 1: __get_user_asm(sr, val, "ldb", ptr); break; \
+	case 2: __get_user_asm(sr, val, "ldh", ptr); break; \
+	case 4: __get_user_asm(sr, val, "ldw", ptr); break; \
+	case 8: LDD_USER(sr, val, ptr); break;		\
 	default: BUILD_BUG();				\
 	}						\
 							\
@@ -97,15 +76,14 @@ struct exception_table_entry {
 
 #define __get_user(val, ptr)				\
 ({							\
-	load_sr2();					\
-	__get_user_internal(val, ptr);			\
+	__get_user_internal("%%sr3,", val, ptr);	\
 })
 
-#define __get_user_asm(val, ldx, ptr)			\
+#define __get_user_asm(sr, val, ldx, ptr)		\
 {							\
 	register long __gu_val;				\
 							\
-	__asm__("1: " ldx " 0(%%sr2,%2),%0\n"		\
+	__asm__("1: " ldx " 0(" sr "%2),%0\n"		\
 		"9:\n"					\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
 		: "=r"(__gu_val), "=r"(__gu_err)        \
@@ -114,9 +92,22 @@ struct exception_table_entry {
 	(val) = (__force __typeof__(*(ptr))) __gu_val;	\
 }
 
+#define HAVE_GET_KERNEL_NOFAULT
+#define __get_kernel_nofault(dst, src, type, err_label)	\
+{							\
+	type __z;					\
+	long __err;					\
+	__err = __get_user_internal("%%sr0,", __z, (type *)(src)); \
+	if (unlikely(__err))				\
+		goto err_label;				\
+	else						\
+		*(type *)(dst) = __z;			\
+}
+
+
 #if !defined(CONFIG_64BIT)
 
-#define __get_user_asm64(val, ptr)			\
+#define __get_user_asm64(sr, val, ptr)			\
 {							\
 	union {						\
 		unsigned long long	l;		\
@@ -124,8 +115,8 @@ struct exception_table_entry {
 	} __gu_tmp;					\
 							\
 	__asm__("   copy %%r0,%R0\n"			\
-		"1: ldw 0(%%sr2,%2),%0\n"		\
-		"2: ldw 4(%%sr2,%2),%R0\n"		\
+		"1: ldw 0(" sr "%2),%0\n"		\
+		"2: ldw 4(" sr "%2),%R0\n"		\
 		"9:\n"					\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	\
 		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	\
@@ -138,16 +129,16 @@ struct exception_table_entry {
 #endif /* !defined(CONFIG_64BIT) */
 
 
-#define __put_user_internal(x, ptr)				\
+#define __put_user_internal(sr, x, ptr)				\
 ({								\
 	register long __pu_err __asm__ ("r8") = 0;      	\
         __typeof__(*(ptr)) __x = (__typeof__(*(ptr)))(x);	\
 								\
 	switch (sizeof(*(ptr))) {				\
-	case 1: __put_user_asm("stb", __x, ptr); break;		\
-	case 2: __put_user_asm("sth", __x, ptr); break;		\
-	case 4: __put_user_asm("stw", __x, ptr); break;		\
-	case 8: STD_USER(__x, ptr); break;			\
+	case 1: __put_user_asm(sr, "stb", __x, ptr); break;	\
+	case 2: __put_user_asm(sr, "sth", __x, ptr); break;	\
+	case 4: __put_user_asm(sr, "stw", __x, ptr); break;	\
+	case 8: STD_USER(sr, __x, ptr); break;			\
 	default: BUILD_BUG();					\
 	}							\
 								\
@@ -156,10 +147,20 @@ struct exception_table_entry {
 
 #define __put_user(x, ptr)					\
 ({								\
-	load_sr2();						\
-	__put_user_internal(x, ptr);				\
+	__put_user_internal("%%sr3,", x, ptr);			\
 })
 
+#define __put_kernel_nofault(dst, src, type, err_label)		\
+{								\
+	type __z = *(type *)(src);				\
+	long __err;						\
+	__err = __put_user_internal("%%sr0,", __z, (type *)(dst)); \
+	if (unlikely(__err))					\
+		goto err_label;					\
+}
+
+
+
 
 /*
  * The "__put_user/kernel_asm()" macros tell gcc they read from memory
@@ -170,26 +171,26 @@ struct exception_table_entry {
  * r8 is already listed as err.
  */
 
-#define __put_user_asm(stx, x, ptr)                         \
-	__asm__ __volatile__ (                              \
-		"1: " stx " %2,0(%%sr2,%1)\n"		    \
-		"9:\n"					    \
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
-		: "=r"(__pu_err)                            \
+#define __put_user_asm(sr, stx, x, ptr)				\
+	__asm__ __volatile__ (					\
+		"1: " stx " %2,0(" sr "%1)\n"			\
+		"9:\n"						\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
+		: "=r"(__pu_err)				\
 		: "r"(ptr), "r"(x), "0"(__pu_err))
 
 
 #if !defined(CONFIG_64BIT)
 
-#define __put_user_asm64(__val, ptr) do {	    	    \
-	__asm__ __volatile__ (				    \
-		"1: stw %2,0(%%sr2,%1)\n"		    \
-		"2: stw %R2,4(%%sr2,%1)\n"		    \
-		"9:\n"					    \
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)	    \
-		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)	    \
-		: "=r"(__pu_err)                            \
-		: "r"(ptr), "r"(__val), "0"(__pu_err));	    \
+#define __put_user_asm64(sr, __val, ptr) do {			\
+	__asm__ __volatile__ (					\
+		"1: stw %2,0(" sr "%1)\n"			\
+		"2: stw %R2,4(" sr "%1)\n"			\
+		"9:\n"						\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b)		\
+		ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b)		\
+		: "=r"(__pu_err)				\
+		: "r"(ptr), "r"(__val), "0"(__pu_err));		\
 } while (0)
 
 #endif /* !defined(CONFIG_64BIT) */
@@ -200,14 +201,12 @@ struct exception_table_entry {
  */
 
 extern long strncpy_from_user(char *, const char __user *, long);
-extern unsigned lclear_user(void __user *, unsigned long);
-extern long lstrnlen_user(const char __user *, long);
+extern __must_check unsigned lclear_user(void __user *, unsigned long);
+extern __must_check long strnlen_user(const char __user *src, long n);
 /*
  * Complex access routines -- macros
  */
-#define user_addr_max() (~0UL)
 
-#define strnlen_user lstrnlen_user
 #define clear_user lclear_user
 #define __clear_user lclear_user
 
@@ -215,8 +214,6 @@ unsigned long __must_check raw_copy_to_user(void __user *dst, const void *src,
 					    unsigned long len);
 unsigned long __must_check raw_copy_from_user(void *dst, const void __user *src,
 					    unsigned long len);
-unsigned long __must_check raw_copy_in_user(void __user *dst, const void __user *src,
-					    unsigned long len);
 #define INLINE_COPY_TO_USER
 #define INLINE_COPY_FROM_USER
 
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 33113ba24054..22924a3f1728 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -230,7 +230,6 @@ int main(void)
 	DEFINE(TI_TASK, offsetof(struct thread_info, task));
 	DEFINE(TI_FLAGS, offsetof(struct thread_info, flags));
 	DEFINE(TI_CPU, offsetof(struct thread_info, cpu));
-	DEFINE(TI_SEGMENT, offsetof(struct thread_info, addr_limit));
 	DEFINE(TI_PRE_COUNT, offsetof(struct thread_info, preempt_count));
 	DEFINE(THREAD_SZ, sizeof(struct thread_info));
 	/* THREAD_SZ_ALGN includes space for a stack frame. */
diff --git a/arch/parisc/kernel/parisc_ksyms.c b/arch/parisc/kernel/parisc_ksyms.c
index e8a6a751dfd8..00297e8e1c88 100644
--- a/arch/parisc/kernel/parisc_ksyms.c
+++ b/arch/parisc/kernel/parisc_ksyms.c
@@ -32,7 +32,6 @@ EXPORT_SYMBOL(__xchg64);
 
 #include <linux/uaccess.h>
 EXPORT_SYMBOL(lclear_user);
-EXPORT_SYMBOL(lstrnlen_user);
 
 #ifndef CONFIG_64BIT
 /* Needed so insmod can set dp value */
diff --git a/arch/parisc/kernel/setup.c b/arch/parisc/kernel/setup.c
index 3fb86ee507dd..cceb09855e03 100644
--- a/arch/parisc/kernel/setup.c
+++ b/arch/parisc/kernel/setup.c
@@ -150,8 +150,6 @@ void __init setup_arch(char **cmdline_p)
 #ifdef CONFIG_PA11
 	dma_ops_init();
 #endif
-
-	clear_sched_clock_stable();
 }
 
 /*
diff --git a/arch/parisc/kernel/signal.c b/arch/parisc/kernel/signal.c
index db1a47cf424d..bbfe23c40c01 100644
--- a/arch/parisc/kernel/signal.c
+++ b/arch/parisc/kernel/signal.c
@@ -237,18 +237,22 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 #endif
 	
 	usp = (regs->gr[30] & ~(0x01UL));
+	sigframe_size = PARISC_RT_SIGFRAME_SIZE;
 #ifdef CONFIG_64BIT
 	if (is_compat_task()) {
 		/* The gcc alloca implementation leaves garbage in the upper 32 bits of sp */
 		usp = (compat_uint_t)usp;
+		sigframe_size = PARISC_RT_SIGFRAME_SIZE32;
 	}
 #endif
-	/*FIXME: frame_size parameter is unused, remove it. */
-	frame = get_sigframe(&ksig->ka, usp, sizeof(*frame));
+	frame = get_sigframe(&ksig->ka, usp, sigframe_size);
 
 	DBG(1,"SETUP_RT_FRAME: START\n");
 	DBG(1,"setup_rt_frame: frame %p info %p\n", frame, ksig->info);
 
+	start = (unsigned long) frame;
+	if (start >= user_addr_max() - sigframe_size)
+		return -EFAULT;
 	
 #ifdef CONFIG_64BIT
 
@@ -284,32 +288,21 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 	   already in userspace. The first words of tramp are used to
 	   save the previous sigrestartblock trampoline that might be
 	   on the stack. We start the sigreturn trampoline at 
-	   SIGRESTARTBLOCK_TRAMP+X. */
+	   SIGRESTARTBLOCK_TRAMP. */
 	err |= __put_user(in_syscall ? INSN_LDI_R25_1 : INSN_LDI_R25_0,
 			&frame->tramp[SIGRESTARTBLOCK_TRAMP+0]);
-	err |= __put_user(INSN_LDI_R20, 
-			&frame->tramp[SIGRESTARTBLOCK_TRAMP+1]);
 	err |= __put_user(INSN_BLE_SR2_R0, 
+			&frame->tramp[SIGRESTARTBLOCK_TRAMP+1]);
+	err |= __put_user(INSN_LDI_R20,
 			&frame->tramp[SIGRESTARTBLOCK_TRAMP+2]);
-	err |= __put_user(INSN_NOP, &frame->tramp[SIGRESTARTBLOCK_TRAMP+3]);
-
-#if DEBUG_SIG
-	/* Assert that we're flushing in the correct space... */
-	{
-		unsigned long sid;
-		asm ("mfsp %%sr3,%0" : "=r" (sid));
-		DBG(1,"setup_rt_frame: Flushing 64 bytes at space %#x offset %p\n",
-		       sid, frame->tramp);
-	}
-#endif
 
-	start = (unsigned long) &frame->tramp[0];
-	end = (unsigned long) &frame->tramp[TRAMP_SIZE];
+	start = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+0];
+	end = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP+3];
 	flush_user_dcache_range_asm(start, end);
 	flush_user_icache_range_asm(start, end);
 
 	/* TRAMP Words 0-4, Length 5 = SIGRESTARTBLOCK_TRAMP
-	 * TRAMP Words 5-9, Length 4 = SIGRETURN_TRAMP
+	 * TRAMP Words 5-7, Length 3 = SIGRETURN_TRAMP
 	 * So the SIGRETURN_TRAMP is at the end of SIGRESTARTBLOCK_TRAMP
 	 */
 	rp = (unsigned long) &frame->tramp[SIGRESTARTBLOCK_TRAMP];
@@ -353,11 +346,6 @@ setup_rt_frame(struct ksignal *ksig, sigset_t *set, struct pt_regs *regs,
 
 	/* The syscall return path will create IAOQ values from r31.
 	 */
-	sigframe_size = PARISC_RT_SIGFRAME_SIZE;
-#ifdef CONFIG_64BIT
-	if (is_compat_task())
-		sigframe_size = PARISC_RT_SIGFRAME_SIZE32;
-#endif
 	if (in_syscall) {
 		regs->gr[31] = haddr;
 #ifdef CONFIG_64BIT
@@ -501,7 +489,6 @@ syscall_restart(struct pt_regs *regs, struct k_sigaction *ka)
 		DBG(1,"ERESTARTNOHAND: returning -EINTR\n");
 		regs->gr[28] = -EINTR;
 		break;
-
 	case -ERESTARTSYS:
 		if (!(ka->sa.sa_flags & SA_RESTART)) {
 			DBG(1,"ERESTARTSYS: putting -EINTR\n");
@@ -529,6 +516,10 @@ insert_restart_trampoline(struct pt_regs *regs)
 		unsigned long end  = (unsigned long) &usp[5];
 		long err = 0;
 
+		/* check that we don't exceed the stack */
+		if (A(&usp[0]) >= user_addr_max() - 5 * sizeof(int))
+			return;
+
 		/* Setup a trampoline to restart the syscall
 		 * with __NR_restart_syscall
 		 *
@@ -569,10 +560,6 @@ insert_restart_trampoline(struct pt_regs *regs)
 }
 
 /*
- * Note that 'init' is a special process: it doesn't get signals it doesn't
- * want to handle. Thus you cannot kill init even with a SIGKILL even by
- * mistake.
- *
  * We need to be able to restore the syscall arguments (r21-r26) to
  * restart syscalls.  Thus, the syscall path should save them in the
  * pt_regs structure (it's okay to do so since they are caller-save
diff --git a/arch/parisc/kernel/signal32.h b/arch/parisc/kernel/signal32.h
index f166250f2d06..a5bdbb5678b7 100644
--- a/arch/parisc/kernel/signal32.h
+++ b/arch/parisc/kernel/signal32.h
@@ -36,7 +36,7 @@ struct compat_regfile {
         compat_int_t rf_sar;
 };
 
-#define COMPAT_SIGRETURN_TRAMP 4
+#define COMPAT_SIGRETURN_TRAMP 3
 #define COMPAT_SIGRESTARTBLOCK_TRAMP 5
 #define COMPAT_TRAMP_SIZE (COMPAT_SIGRETURN_TRAMP + \
 				COMPAT_SIGRESTARTBLOCK_TRAMP)
diff --git a/arch/parisc/kernel/syscalls/syscall.tbl b/arch/parisc/kernel/syscalls/syscall.tbl
index 0bf854b70612..bf751e0732b7 100644
--- a/arch/parisc/kernel/syscalls/syscall.tbl
+++ b/arch/parisc/kernel/syscalls/syscall.tbl
@@ -292,9 +292,9 @@
 258	32	clock_nanosleep		sys_clock_nanosleep_time32
 258	64	clock_nanosleep		sys_clock_nanosleep
 259	common	tgkill			sys_tgkill
-260	common	mbind			sys_mbind			compat_sys_mbind
-261	common	get_mempolicy		sys_get_mempolicy		compat_sys_get_mempolicy
-262	common	set_mempolicy		sys_set_mempolicy		compat_sys_set_mempolicy
+260	common	mbind			sys_mbind
+261	common	get_mempolicy		sys_get_mempolicy
+262	common	set_mempolicy		sys_set_mempolicy
 # 263 was vserver
 264	common	add_key			sys_add_key
 265	common	request_key		sys_request_key
@@ -331,7 +331,7 @@
 292	64	sync_file_range		sys_sync_file_range
 293	common	tee			sys_tee
 294	common	vmsplice		sys_vmsplice
-295	common	move_pages		sys_move_pages			compat_sys_move_pages
+295	common	move_pages		sys_move_pages
 296	common	getcpu			sys_getcpu
 297	common	epoll_pwait		sys_epoll_pwait			compat_sys_epoll_pwait
 298	common	statfs64		sys_statfs64			compat_sys_statfs64
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c
index 08e4d480abe1..9fb1e794831b 100644
--- a/arch/parisc/kernel/time.c
+++ b/arch/parisc/kernel/time.c
@@ -265,6 +265,9 @@ static int __init init_cr16_clocksource(void)
 			    (cpu0_loc == per_cpu(cpu_data, cpu).cpu_loc))
 				continue;
 
+			/* mark sched_clock unstable */
+			clear_sched_clock_stable();
+
 			clocksource_cr16.name = "cr16_unstable";
 			clocksource_cr16.flags = CLOCK_SOURCE_UNSTABLE;
 			clocksource_cr16.rating = 0;
@@ -272,10 +275,6 @@ static int __init init_cr16_clocksource(void)
 		}
 	}
 
-	/* XXX: We may want to mark sched_clock stable here if cr16 clocks are
-	 *	in sync:
-	 *	(clocksource_cr16.flags == CLOCK_SOURCE_IS_CONTINUOUS) */
-
 	/* register at clocksource framework */
 	clocksource_register_hz(&clocksource_cr16,
 		100 * PAGE0->mem_10msec);
diff --git a/arch/parisc/kernel/traps.c b/arch/parisc/kernel/traps.c
index 8d8441d4562a..747c328fb886 100644
--- a/arch/parisc/kernel/traps.c
+++ b/arch/parisc/kernel/traps.c
@@ -859,7 +859,3 @@ void  __init early_trap_init(void)
 
 	initialize_ivt(&fault_vector_20);
 }
-
-void __init trap_init(void)
-{
-}
diff --git a/arch/parisc/lib/lusercopy.S b/arch/parisc/lib/lusercopy.S
index 36d6a8638ead..b428d29e45fb 100644
--- a/arch/parisc/lib/lusercopy.S
+++ b/arch/parisc/lib/lusercopy.S
@@ -28,21 +28,6 @@
 #include <linux/linkage.h>
 
 	/*
-	 * get_sr gets the appropriate space value into
-	 * sr1 for kernel/user space access, depending
-	 * on the flag stored in the task structure.
-	 */
-
-	.macro  get_sr
-	mfctl       %cr30,%r1
-	ldw         TI_SEGMENT(%r1),%r22
-	mfsp        %sr3,%r1
-	or,<>       %r22,%r0,%r0
-	copy        %r0,%r1
-	mtsp        %r1,%sr1
-	.endm
-
-	/*
 	 * unsigned long lclear_user(void *to, unsigned long n)
 	 *
 	 * Returns 0 for success.
@@ -51,10 +36,9 @@
 
 ENTRY_CFI(lclear_user)
 	comib,=,n   0,%r25,$lclu_done
-	get_sr
 $lclu_loop:
 	addib,<>    -1,%r25,$lclu_loop
-1:      stbs,ma     %r0,1(%sr1,%r26)
+1:	stbs,ma     %r0,1(%sr3,%r26)
 
 $lclu_done:
 	bv          %r0(%r2)
@@ -67,40 +51,6 @@ $lclu_done:
 ENDPROC_CFI(lclear_user)
 
 
-	/*
-	 * long lstrnlen_user(char *s, long n)
-	 *
-	 * Returns 0 if exception before zero byte or reaching N,
-	 *         N+1 if N would be exceeded,
-	 *         else strlen + 1 (i.e. includes zero byte).
-	 */
-
-ENTRY_CFI(lstrnlen_user)
-	comib,=     0,%r25,$lslen_nzero
-	copy	    %r26,%r24
-	get_sr
-1:      ldbs,ma     1(%sr1,%r26),%r1
-$lslen_loop:
-	comib,=,n   0,%r1,$lslen_done
-	addib,<>    -1,%r25,$lslen_loop
-2:      ldbs,ma     1(%sr1,%r26),%r1
-$lslen_done:
-	bv          %r0(%r2)
-	sub	    %r26,%r24,%r28
-
-$lslen_nzero:
-	b           $lslen_done
-	ldo         1(%r26),%r26 /* special case for N == 0 */
-
-3:      b	    $lslen_done
-	copy        %r24,%r26    /* reset r26 so 0 is returned on fault */
-
-	ASM_EXCEPTIONTABLE_ENTRY(1b,3b)
-	ASM_EXCEPTIONTABLE_ENTRY(2b,3b)
-
-ENDPROC_CFI(lstrnlen_user)
-
-
 /*
  * unsigned long pa_memcpy(void *dstp, const void *srcp, unsigned long len)
  *
diff --git a/arch/parisc/lib/memcpy.c b/arch/parisc/lib/memcpy.c
index 4b75388190b4..ea70a0e08321 100644
--- a/arch/parisc/lib/memcpy.c
+++ b/arch/parisc/lib/memcpy.c
@@ -38,14 +38,6 @@ unsigned long raw_copy_from_user(void *dst, const void __user *src,
 }
 EXPORT_SYMBOL(raw_copy_from_user);
 
-unsigned long raw_copy_in_user(void __user *dst, const void __user *src, unsigned long len)
-{
-	mtsp(get_user_space(), 1);
-	mtsp(get_user_space(), 2);
-	return pa_memcpy((void __force *)dst, (void __force *)src, len);
-}
-
-
 void * memcpy(void * dst,const void *src, size_t count)
 {
 	mtsp(get_kernel_space(), 1);
@@ -54,7 +46,6 @@ void * memcpy(void * dst,const void *src, size_t count)
 	return dst;
 }
 
-EXPORT_SYMBOL(raw_copy_in_user);
 EXPORT_SYMBOL(memcpy);
 
 bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 8a93b509337d..ba5b66189358 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -94,10 +94,6 @@ config STACKTRACE_SUPPORT
 	bool
 	default y
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
@@ -270,6 +266,7 @@ config PPC
 	select STRICT_KERNEL_RWX if STRICT_MODULE_RWX
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
+	select TRACE_IRQFLAGS_SUPPORT
 	select VIRT_TO_BUS			if !PPC64
 	#
 	# Please keep this list sorted alphabetically.
diff --git a/arch/powerpc/include/asm/compat.h b/arch/powerpc/include/asm/compat.h
index e33dcf134cdd..7afc96fb6524 100644
--- a/arch/powerpc/include/asm/compat.h
+++ b/arch/powerpc/include/asm/compat.h
@@ -83,22 +83,6 @@ struct compat_statfs {
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = current->thread.regs;
-	unsigned long usp = regs->gpr[1];
-
-	/*
-	 * We can't access below the stack pointer in the 32bit ABI and
-	 * can access 288 bytes in the 64bit big-endian ABI,
-	 * or 512 bytes with the new ELFv2 little-endian ABI.
-	 */
-	if (!is_32bit_task())
-		usp -= USER_REDZONE_SIZE;
-
-	return (void __user *) (usp - len);
-}
-
 /*
  * ipc64_perm is actually 32/64bit clean but since the compat layer refers to
  * it we may as well define it.
diff --git a/arch/powerpc/include/asm/kvm_host.h b/arch/powerpc/include/asm/kvm_host.h
index a779f7849cfb..080a7feb7731 100644
--- a/arch/powerpc/include/asm/kvm_host.h
+++ b/arch/powerpc/include/asm/kvm_host.h
@@ -103,7 +103,6 @@ struct kvm_vcpu_stat {
 	u64 emulated_inst_exits;
 	u64 dec_exits;
 	u64 ext_intr_exits;
-	u64 halt_wait_ns;
 	u64 halt_successful_wait;
 	u64 dbell_exits;
 	u64 gdbell_exits;
diff --git a/arch/powerpc/kernel/syscalls/syscall.tbl b/arch/powerpc/kernel/syscalls/syscall.tbl
index 29b55e2e035c..7bef917cc84e 100644
--- a/arch/powerpc/kernel/syscalls/syscall.tbl
+++ b/arch/powerpc/kernel/syscalls/syscall.tbl
@@ -330,10 +330,10 @@
 256	64	sys_debug_setcontext		sys_ni_syscall
 256	spu	sys_debug_setcontext		sys_ni_syscall
 # 257 reserved for vserver
-258	nospu	migrate_pages			sys_migrate_pages		compat_sys_migrate_pages
-259	nospu	mbind				sys_mbind			compat_sys_mbind
-260	nospu	get_mempolicy			sys_get_mempolicy		compat_sys_get_mempolicy
-261	nospu	set_mempolicy			sys_set_mempolicy		compat_sys_set_mempolicy
+258	nospu	migrate_pages			sys_migrate_pages
+259	nospu	mbind				sys_mbind
+260	nospu	get_mempolicy			sys_get_mempolicy
+261	nospu	set_mempolicy			sys_set_mempolicy
 262	nospu	mq_open				sys_mq_open			compat_sys_mq_open
 263	nospu	mq_unlink			sys_mq_unlink
 264	32	mq_timedsend			sys_mq_timedsend_time32
@@ -381,7 +381,7 @@
 298	common	faccessat			sys_faccessat
 299	common	get_robust_list			sys_get_robust_list		compat_sys_get_robust_list
 300	common	set_robust_list			sys_set_robust_list		compat_sys_set_robust_list
-301	common	move_pages			sys_move_pages			compat_sys_move_pages
+301	common	move_pages			sys_move_pages
 302	common	getcpu				sys_getcpu
 303	nospu	epoll_pwait			sys_epoll_pwait			compat_sys_epoll_pwait
 304	32	utimensat			sys_utimensat_time32
diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c
index 4390f8d72126..aac8c0412ff9 100644
--- a/arch/powerpc/kernel/traps.c
+++ b/arch/powerpc/kernel/traps.c
@@ -2219,11 +2219,6 @@ DEFINE_INTERRUPT_HANDLER(kernel_bad_stack)
 	die("Bad kernel stack pointer", regs, SIGABRT);
 }
 
-void __init trap_init(void)
-{
-}
-
-
 #ifdef CONFIG_PPC_EMULATED_STATS
 
 #define WARN_EMULATED_SETUP(type)	.type = { .name = #type }
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 79833f78d1da..b785f6772391 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -43,8 +43,6 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	STATS_DESC_ICOUNTER(VM, num_2M_pages),
 	STATS_DESC_ICOUNTER(VM, num_1G_pages)
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -71,7 +69,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, emulated_inst_exits),
 	STATS_DESC_COUNTER(VCPU, dec_exits),
 	STATS_DESC_COUNTER(VCPU, ext_intr_exits),
-	STATS_DESC_TIME_NSEC(VCPU, halt_wait_ns),
 	STATS_DESC_COUNTER(VCPU, halt_successful_wait),
 	STATS_DESC_COUNTER(VCPU, dbell_exits),
 	STATS_DESC_COUNTER(VCPU, gdbell_exits),
@@ -88,8 +85,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, pthru_host),
 	STATS_DESC_COUNTER(VCPU, pthru_bad_aff)
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
diff --git a/arch/powerpc/kvm/book3s_64_vio.c b/arch/powerpc/kvm/book3s_64_vio.c
index 8da93fdfa59e..6365087f3160 100644
--- a/arch/powerpc/kvm/book3s_64_vio.c
+++ b/arch/powerpc/kvm/book3s_64_vio.c
@@ -346,7 +346,7 @@ static long kvmppc_tce_to_ua(struct kvm *kvm, unsigned long tce,
 	unsigned long gfn = tce >> PAGE_SHIFT;
 	struct kvm_memory_slot *memslot;
 
-	memslot = search_memslots(kvm_memslots(kvm), gfn);
+	memslot = __gfn_to_memslot(kvm_memslots(kvm), gfn);
 	if (!memslot)
 		return -EINVAL;
 
diff --git a/arch/powerpc/kvm/book3s_64_vio_hv.c b/arch/powerpc/kvm/book3s_64_vio_hv.c
index 636c6ae0939b..870b7f0c7ea5 100644
--- a/arch/powerpc/kvm/book3s_64_vio_hv.c
+++ b/arch/powerpc/kvm/book3s_64_vio_hv.c
@@ -80,7 +80,7 @@ static long kvmppc_rm_tce_to_ua(struct kvm *kvm,
 	unsigned long gfn = tce >> PAGE_SHIFT;
 	struct kvm_memory_slot *memslot;
 
-	memslot = search_memslots(kvm_memslots_raw(kvm), gfn);
+	memslot = __gfn_to_memslot(kvm_memslots_raw(kvm), gfn);
 	if (!memslot)
 		return -EINVAL;
 
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index bb0dacf7cbec..2acb1c96cfaf 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -4202,19 +4202,31 @@ out:
 
 	/* Attribute wait time */
 	if (do_sleep) {
-		vc->runner->stat.halt_wait_ns +=
+		vc->runner->stat.generic.halt_wait_ns +=
 			ktime_to_ns(cur) - ktime_to_ns(start_wait);
+		KVM_STATS_LOG_HIST_UPDATE(
+				vc->runner->stat.generic.halt_wait_hist,
+				ktime_to_ns(cur) - ktime_to_ns(start_wait));
 		/* Attribute failed poll time */
-		if (vc->halt_poll_ns)
+		if (vc->halt_poll_ns) {
 			vc->runner->stat.generic.halt_poll_fail_ns +=
 				ktime_to_ns(start_wait) -
 				ktime_to_ns(start_poll);
+			KVM_STATS_LOG_HIST_UPDATE(
+				vc->runner->stat.generic.halt_poll_fail_hist,
+				ktime_to_ns(start_wait) -
+				ktime_to_ns(start_poll));
+		}
 	} else {
 		/* Attribute successful poll time */
-		if (vc->halt_poll_ns)
+		if (vc->halt_poll_ns) {
 			vc->runner->stat.generic.halt_poll_success_ns +=
 				ktime_to_ns(cur) -
 				ktime_to_ns(start_poll);
+			KVM_STATS_LOG_HIST_UPDATE(
+				vc->runner->stat.generic.halt_poll_success_hist,
+				ktime_to_ns(cur) - ktime_to_ns(start_poll));
+		}
 	}
 
 	/* Adjust poll time */
diff --git a/arch/powerpc/kvm/booke.c b/arch/powerpc/kvm/booke.c
index 551b30d84aee..977801c83aff 100644
--- a/arch/powerpc/kvm/booke.c
+++ b/arch/powerpc/kvm/booke.c
@@ -41,8 +41,6 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	STATS_DESC_ICOUNTER(VM, num_2M_pages),
 	STATS_DESC_ICOUNTER(VM, num_1G_pages)
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -69,7 +67,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, emulated_inst_exits),
 	STATS_DESC_COUNTER(VCPU, dec_exits),
 	STATS_DESC_COUNTER(VCPU, ext_intr_exits),
-	STATS_DESC_TIME_NSEC(VCPU, halt_wait_ns),
 	STATS_DESC_COUNTER(VCPU, halt_successful_wait),
 	STATS_DESC_COUNTER(VCPU, dbell_exits),
 	STATS_DESC_COUNTER(VCPU, gdbell_exits),
@@ -79,8 +76,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, pthru_host),
 	STATS_DESC_COUNTER(VCPU, pthru_bad_aff)
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index ad198b439222..c3c4e31462ec 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -119,8 +119,7 @@ int __ref arch_add_memory(int nid, u64 start, u64 size,
 	return rc;
 }
 
-void __ref arch_remove_memory(int nid, u64 start, u64 size,
-			      struct vmem_altmap *altmap)
+void __ref arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c
index 44246ba59768..91cf23495ccb 100644
--- a/arch/powerpc/platforms/pseries/hotplug-memory.c
+++ b/arch/powerpc/platforms/pseries/hotplug-memory.c
@@ -286,7 +286,7 @@ static int pseries_remove_memblock(unsigned long base, unsigned long memblock_si
 {
 	unsigned long block_sz, start_pfn;
 	int sections_per_block;
-	int i, nid;
+	int i;
 
 	start_pfn = base >> PAGE_SHIFT;
 
@@ -297,10 +297,9 @@ static int pseries_remove_memblock(unsigned long base, unsigned long memblock_si
 
 	block_sz = pseries_memory_block_size();
 	sections_per_block = block_sz / MIN_MEMORY_BLOCK_SIZE;
-	nid = memory_add_physaddr_to_nid(base);
 
 	for (i = 0; i < sections_per_block; i++) {
-		__remove_memory(nid, base, MIN_MEMORY_BLOCK_SIZE);
+		__remove_memory(base, MIN_MEMORY_BLOCK_SIZE);
 		base += MIN_MEMORY_BLOCK_SIZE;
 	}
 
@@ -387,7 +386,7 @@ static int dlpar_remove_lmb(struct drmem_lmb *lmb)
 
 	block_sz = pseries_memory_block_size();
 
-	__remove_memory(mem_block->nid, lmb->base_addr, block_sz);
+	__remove_memory(lmb->base_addr, block_sz);
 	put_device(&mem_block->dev);
 
 	/* Update memory regions for memory remove */
@@ -660,7 +659,7 @@ static int dlpar_add_lmb(struct drmem_lmb *lmb)
 
 	rc = dlpar_online_lmb(lmb);
 	if (rc) {
-		__remove_memory(nid, lmb->base_addr, block_sz);
+		__remove_memory(lmb->base_addr, block_sz);
 		invalidate_lmb_associativity_index(lmb);
 	} else {
 		lmb->flags |= DRCONF_MEM_ASSIGNED;
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index c1abbc876e5b..c3f3fd583e04 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -52,7 +52,7 @@ config RISCV
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
 	select GENERIC_IDLE_POLL_SETUP
-	select GENERIC_IOREMAP
+	select GENERIC_IOREMAP if MMU
 	select GENERIC_IRQ_MULTI_HANDLER
 	select GENERIC_IRQ_SHOW
 	select GENERIC_IRQ_SHOW_LEVEL
@@ -114,6 +114,7 @@ config RISCV
 	select SPARSE_IRQ
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
+	select TRACE_IRQFLAGS_SUPPORT
 	select UACCESS_MEMCPY if !MMU
 	select ZONE_DMA32 if 64BIT
 
@@ -183,9 +184,6 @@ config ARCH_SUPPORTS_UPROBES
 config STACKTRACE_SUPPORT
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config GENERIC_BUG
 	def_bool y
 	depends on BUG
diff --git a/arch/riscv/kernel/traps.c b/arch/riscv/kernel/traps.c
index 0a98fd0ddfe9..0daaa3e4630d 100644
--- a/arch/riscv/kernel/traps.c
+++ b/arch/riscv/kernel/traps.c
@@ -199,11 +199,6 @@ int is_valid_bugaddr(unsigned long pc)
 }
 #endif /* CONFIG_GENERIC_BUG */
 
-/* stvec & scratch is already set from head.S */
-void __init trap_init(void)
-{
-}
-
 #ifdef CONFIG_VMAP_STACK
 static DEFINE_PER_CPU(unsigned long [OVERFLOW_STACK_SIZE/sizeof(long)],
 		overflow_stack)__aligned(16);
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index 92c0a1b4c528..2bd90c51efd3 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -110,6 +110,7 @@ config S390
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC
+	select ARCH_SUPPORTS_HUGETLBFS
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
@@ -209,6 +210,7 @@ config S390
 	select SWIOTLB
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
+	select TRACE_IRQFLAGS_SUPPORT
 	select TTY
 	select VIRT_CPU_ACCOUNTING
 	select ZONE_DMA
diff --git a/arch/s390/Kconfig.debug b/arch/s390/Kconfig.debug
index 9ea6e61d5858..e94a2a7f6bf4 100644
--- a/arch/s390/Kconfig.debug
+++ b/arch/s390/Kconfig.debug
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config EARLY_PRINTK
 	def_bool y
 
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 11ffc7c37ada..37b6115ed80e 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -804,6 +804,7 @@ CONFIG_DEBUG_VM_PGFLAGS=y
 CONFIG_DEBUG_MEMORY_INIT=y
 CONFIG_MEMORY_NOTIFIER_ERROR_INJECT=m
 CONFIG_DEBUG_PER_CPU_MAPS=y
+CONFIG_KFENCE=y
 CONFIG_DEBUG_SHIRQ=y
 CONFIG_PANIC_ON_OOPS=y
 CONFIG_DETECT_HUNG_TASK=y
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index e1642d2cba59..56a1cc85c5d7 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -397,7 +397,6 @@ CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
-# CONFIG_BLK_DEV_XPRAM is not set
 CONFIG_VIRTIO_BLK=y
 CONFIG_BLK_DEV_RBD=m
 CONFIG_BLK_DEV_NVME=m
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index d576aaab27c9..aceccf3b9a88 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -35,7 +35,6 @@ CONFIG_NET=y
 # CONFIG_ETHTOOL_NETLINK is not set
 CONFIG_DEVTMPFS=y
 CONFIG_BLK_DEV_RAM=y
-# CONFIG_BLK_DEV_XPRAM is not set
 # CONFIG_DCSSBLK is not set
 # CONFIG_DASD is not set
 CONFIG_ENCLOSURE_SERVICES=y
diff --git a/arch/s390/include/asm/compat.h b/arch/s390/include/asm/compat.h
index 8d49505b4a43..cdc7ae72529d 100644
--- a/arch/s390/include/asm/compat.h
+++ b/arch/s390/include/asm/compat.h
@@ -176,16 +176,6 @@ static inline int is_compat_task(void)
 	return test_thread_flag(TIF_31BIT);
 }
 
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	unsigned long stack;
-
-	stack = KSTK_ESP(current);
-	if (is_compat_task())
-		stack &= 0x7fffffffUL;
-	return (void __user *) (stack - len);
-}
-
 #endif
 
 struct compat_ipc64_perm {
diff --git a/arch/s390/include/asm/cpu_mcf.h b/arch/s390/include/asm/cpu_mcf.h
index ca0e0e5ddbc4..f87a4788c19c 100644
--- a/arch/s390/include/asm/cpu_mcf.h
+++ b/arch/s390/include/asm/cpu_mcf.h
@@ -24,13 +24,6 @@ enum cpumf_ctr_set {
 
 #define CPUMF_LCCTL_ENABLE_SHIFT    16
 #define CPUMF_LCCTL_ACTCTL_SHIFT     0
-static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
-	[CPUMF_CTR_SET_BASIC]	= 0x02,
-	[CPUMF_CTR_SET_USER]	= 0x04,
-	[CPUMF_CTR_SET_CRYPTO]	= 0x08,
-	[CPUMF_CTR_SET_EXT]	= 0x01,
-	[CPUMF_CTR_SET_MT_DIAG] = 0x20,
-};
 
 static inline void ctr_set_enable(u64 *state, u64 ctrsets)
 {
diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h
index d681ae462350..a604d51acfc8 100644
--- a/arch/s390/include/asm/kvm_host.h
+++ b/arch/s390/include/asm/kvm_host.h
@@ -244,6 +244,7 @@ struct kvm_s390_sie_block {
 	__u8	fpf;			/* 0x0060 */
 #define ECB_GS		0x40
 #define ECB_TE		0x10
+#define ECB_SPECI	0x08
 #define ECB_SRSI	0x04
 #define ECB_HOSTPROTINT	0x02
 	__u8	ecb;			/* 0x0061 */
@@ -955,6 +956,7 @@ struct kvm_arch{
 	atomic64_t cmma_dirty_pages;
 	/* subset of available cpu features enabled by user space */
 	DECLARE_BITMAP(cpu_feat, KVM_S390_VM_CPU_FEAT_NR_BITS);
+	/* indexed by vcpu_idx */
 	DECLARE_BITMAP(idle_mask, KVM_MAX_VCPUS);
 	struct kvm_s390_gisa_interrupt gisa_int;
 	struct kvm_s390_pv pv;
diff --git a/arch/s390/include/asm/smp.h b/arch/s390/include/asm/smp.h
index e317fd4866c1..f16f4d054ae2 100644
--- a/arch/s390/include/asm/smp.h
+++ b/arch/s390/include/asm/smp.h
@@ -18,6 +18,7 @@ extern struct mutex smp_cpu_state_mutex;
 extern unsigned int smp_cpu_mt_shift;
 extern unsigned int smp_cpu_mtid;
 extern __vector128 __initdata boot_cpu_vector_save_area[__NUM_VXRS];
+extern cpumask_t cpu_setup_mask;
 
 extern int __cpu_up(unsigned int cpu, struct task_struct *tidle);
 
diff --git a/arch/s390/include/asm/stacktrace.h b/arch/s390/include/asm/stacktrace.h
index 3d8a4b94c620..dd00d98804ec 100644
--- a/arch/s390/include/asm/stacktrace.h
+++ b/arch/s390/include/asm/stacktrace.h
@@ -34,16 +34,6 @@ static inline bool on_stack(struct stack_info *info,
 	return addr >= info->begin && addr + len <= info->end;
 }
 
-static __always_inline unsigned long get_stack_pointer(struct task_struct *task,
-						       struct pt_regs *regs)
-{
-	if (regs)
-		return (unsigned long) kernel_stack_pointer(regs);
-	if (task == current)
-		return current_stack_pointer();
-	return (unsigned long) task->thread.ksp;
-}
-
 /*
  * Stack layout of a C stack frame.
  */
@@ -74,6 +64,16 @@ struct stack_frame {
 	((unsigned long)__builtin_frame_address(0) -			\
 	 offsetof(struct stack_frame, back_chain))
 
+static __always_inline unsigned long get_stack_pointer(struct task_struct *task,
+						       struct pt_regs *regs)
+{
+	if (regs)
+		return (unsigned long)kernel_stack_pointer(regs);
+	if (task == current)
+		return current_frame_address();
+	return (unsigned long)task->thread.ksp;
+}
+
 /*
  * To keep this simple mark register 2-6 as being changed (volatile)
  * by the called function, even though register 6 is saved/nonvolatile.
diff --git a/arch/s390/include/asm/uaccess.h b/arch/s390/include/asm/uaccess.h
index 9ed9aa37e836..ce550d06abc3 100644
--- a/arch/s390/include/asm/uaccess.h
+++ b/arch/s390/include/asm/uaccess.h
@@ -227,9 +227,6 @@ static inline int __get_user_fn(void *x, const void __user *ptr, unsigned long s
 	__get_user(x, ptr);					\
 })
 
-unsigned long __must_check
-raw_copy_in_user(void __user *to, const void __user *from, unsigned long n);
-
 /*
  * Copy a null terminated string from userspace.
  */
diff --git a/arch/s390/include/asm/unwind.h b/arch/s390/include/asm/unwind.h
index de9006b0cfeb..5ebf534ef753 100644
--- a/arch/s390/include/asm/unwind.h
+++ b/arch/s390/include/asm/unwind.h
@@ -55,10 +55,10 @@ static inline bool unwind_error(struct unwind_state *state)
 	return state->error;
 }
 
-static inline void unwind_start(struct unwind_state *state,
-				struct task_struct *task,
-				struct pt_regs *regs,
-				unsigned long first_frame)
+static __always_inline void unwind_start(struct unwind_state *state,
+					 struct task_struct *task,
+					 struct pt_regs *regs,
+					 unsigned long first_frame)
 {
 	task = task ?: current;
 	first_frame = first_frame ?: get_stack_pointer(task, regs);
diff --git a/arch/s390/kernel/entry.S b/arch/s390/kernel/entry.S
index b9716a7e326d..4c9b967290ae 100644
--- a/arch/s390/kernel/entry.S
+++ b/arch/s390/kernel/entry.S
@@ -140,10 +140,10 @@ _LPP_OFFSET	= __LC_LPP
 	TSTMSK	__LC_MCCK_CODE,(MCCK_CODE_STG_ERROR|MCCK_CODE_STG_KEY_ERROR)
 	jnz	\errlabel
 	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_DEGRAD
-	jz	oklabel\@
+	jz	.Loklabel\@
 	TSTMSK	__LC_MCCK_CODE,MCCK_CODE_STG_FAIL_ADDR
 	jnz	\errlabel
-oklabel\@:
+.Loklabel\@:
 	.endm
 
 #if IS_ENABLED(CONFIG_KVM)
diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c
index 0a464d328467..1d94ffdf347b 100644
--- a/arch/s390/kernel/ftrace.c
+++ b/arch/s390/kernel/ftrace.c
@@ -341,13 +341,13 @@ NOKPROBE_SYMBOL(prepare_ftrace_return);
  */
 int ftrace_enable_ftrace_graph_caller(void)
 {
-	brcl_disable(__va(ftrace_graph_caller));
+	brcl_disable(ftrace_graph_caller);
 	return 0;
 }
 
 int ftrace_disable_ftrace_graph_caller(void)
 {
-	brcl_enable(__va(ftrace_graph_caller));
+	brcl_enable(ftrace_graph_caller);
 	return 0;
 }
 
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 2e3bb633acf6..4a99154fe651 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -158,6 +158,14 @@ static size_t cfdiag_getctrset(struct cf_ctrset_entry *ctrdata, int ctrset,
 	return need;
 }
 
+static const u64 cpumf_ctr_ctl[CPUMF_CTR_SET_MAX] = {
+	[CPUMF_CTR_SET_BASIC]	= 0x02,
+	[CPUMF_CTR_SET_USER]	= 0x04,
+	[CPUMF_CTR_SET_CRYPTO]	= 0x08,
+	[CPUMF_CTR_SET_EXT]	= 0x01,
+	[CPUMF_CTR_SET_MT_DIAG] = 0x20,
+};
+
 /* Read out all counter sets and save them in the provided data buffer.
  * The last 64 byte host an artificial trailer entry.
  */
diff --git a/arch/s390/kernel/setup.c b/arch/s390/kernel/setup.c
index 5a01872f5984..67e5fff96ee0 100644
--- a/arch/s390/kernel/setup.c
+++ b/arch/s390/kernel/setup.c
@@ -50,6 +50,7 @@
 #include <linux/compat.h>
 #include <linux/start_kernel.h>
 #include <linux/hugetlb.h>
+#include <linux/kmemleak.h>
 
 #include <asm/boot_data.h>
 #include <asm/ipl.h>
@@ -356,9 +357,12 @@ void *restart_stack;
 unsigned long stack_alloc(void)
 {
 #ifdef CONFIG_VMAP_STACK
-	return (unsigned long)__vmalloc_node(THREAD_SIZE, THREAD_SIZE,
-			THREADINFO_GFP, NUMA_NO_NODE,
-			__builtin_return_address(0));
+	void *ret;
+
+	ret = __vmalloc_node(THREAD_SIZE, THREAD_SIZE, THREADINFO_GFP,
+			     NUMA_NO_NODE, __builtin_return_address(0));
+	kmemleak_not_leak(ret);
+	return (unsigned long)ret;
 #else
 	return __get_free_pages(GFP_KERNEL, THREAD_SIZE_ORDER);
 #endif
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2a991e43ead3..1a04e5bdf655 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -95,6 +95,7 @@ __vector128 __initdata boot_cpu_vector_save_area[__NUM_VXRS];
 #endif
 
 static unsigned int smp_max_threads __initdata = -1U;
+cpumask_t cpu_setup_mask;
 
 static int __init early_nosmt(char *s)
 {
@@ -902,13 +903,14 @@ static void smp_start_secondary(void *cpuvoid)
 	vtime_init();
 	vdso_getcpu_init();
 	pfault_init();
+	cpumask_set_cpu(cpu, &cpu_setup_mask);
+	update_cpu_masks();
 	notify_cpu_starting(cpu);
 	if (topology_cpu_dedicated(cpu))
 		set_cpu_flag(CIF_DEDICATED_CPU);
 	else
 		clear_cpu_flag(CIF_DEDICATED_CPU);
 	set_cpu_online(cpu, true);
-	update_cpu_masks();
 	inc_irq_stat(CPU_RST);
 	local_irq_enable();
 	cpu_startup_entry(CPUHP_AP_ONLINE_IDLE);
@@ -950,10 +952,13 @@ early_param("possible_cpus", _setup_possible_cpus);
 int __cpu_disable(void)
 {
 	unsigned long cregs[16];
+	int cpu;
 
 	/* Handle possible pending IPIs */
 	smp_handle_ext_call();
-	set_cpu_online(smp_processor_id(), false);
+	cpu = smp_processor_id();
+	set_cpu_online(cpu, false);
+	cpumask_clear_cpu(cpu, &cpu_setup_mask);
 	update_cpu_masks();
 	/* Disable pseudo page faults on this cpu. */
 	pfault_fini();
diff --git a/arch/s390/kernel/syscalls/syscall.tbl b/arch/s390/kernel/syscalls/syscall.tbl
index aa9d68b8ee14..df5261e5cfe1 100644
--- a/arch/s390/kernel/syscalls/syscall.tbl
+++ b/arch/s390/kernel/syscalls/syscall.tbl
@@ -274,9 +274,9 @@
 265  common	statfs64		sys_statfs64			compat_sys_statfs64
 266  common	fstatfs64		sys_fstatfs64			compat_sys_fstatfs64
 267  common	remap_file_pages	sys_remap_file_pages		sys_remap_file_pages
-268  common	mbind			sys_mbind			compat_sys_mbind
-269  common	get_mempolicy		sys_get_mempolicy		compat_sys_get_mempolicy
-270  common	set_mempolicy		sys_set_mempolicy		compat_sys_set_mempolicy
+268  common	mbind			sys_mbind			sys_mbind
+269  common	get_mempolicy		sys_get_mempolicy		sys_get_mempolicy
+270  common	set_mempolicy		sys_set_mempolicy		sys_set_mempolicy
 271  common	mq_open			sys_mq_open			compat_sys_mq_open
 272  common	mq_unlink		sys_mq_unlink			sys_mq_unlink
 273  common	mq_timedsend		sys_mq_timedsend		sys_mq_timedsend_time32
@@ -293,7 +293,7 @@
 284  common	inotify_init		sys_inotify_init		sys_inotify_init
 285  common	inotify_add_watch	sys_inotify_add_watch		sys_inotify_add_watch
 286  common	inotify_rm_watch	sys_inotify_rm_watch		sys_inotify_rm_watch
-287  common	migrate_pages		sys_migrate_pages		compat_sys_migrate_pages
+287  common	migrate_pages		sys_migrate_pages		sys_migrate_pages
 288  common	openat			sys_openat			compat_sys_openat
 289  common	mkdirat			sys_mkdirat			sys_mkdirat
 290  common	mknodat			sys_mknodat			sys_mknodat
@@ -317,7 +317,7 @@
 307  common	sync_file_range		sys_sync_file_range		compat_sys_s390_sync_file_range
 308  common	tee			sys_tee				sys_tee
 309  common	vmsplice		sys_vmsplice			sys_vmsplice
-310  common	move_pages		sys_move_pages			compat_sys_move_pages
+310  common	move_pages		sys_move_pages			sys_move_pages
 311  common	getcpu			sys_getcpu			sys_getcpu
 312  common	epoll_pwait		sys_epoll_pwait			compat_sys_epoll_pwait
 313  common	utimes			sys_utimes			sys_utimes_time32
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index d2458a29618f..58f8291950cb 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -67,7 +67,7 @@ static void cpu_group_map(cpumask_t *dst, struct mask_info *info, unsigned int c
 	static cpumask_t mask;
 
 	cpumask_clear(&mask);
-	if (!cpu_online(cpu))
+	if (!cpumask_test_cpu(cpu, &cpu_setup_mask))
 		goto out;
 	cpumask_set_cpu(cpu, &mask);
 	switch (topology_mode) {
@@ -88,7 +88,7 @@ static void cpu_group_map(cpumask_t *dst, struct mask_info *info, unsigned int c
 	case TOPOLOGY_MODE_SINGLE:
 		break;
 	}
-	cpumask_and(&mask, &mask, cpu_online_mask);
+	cpumask_and(&mask, &mask, &cpu_setup_mask);
 out:
 	cpumask_copy(dst, &mask);
 }
@@ -99,16 +99,16 @@ static void cpu_thread_map(cpumask_t *dst, unsigned int cpu)
 	int i;
 
 	cpumask_clear(&mask);
-	if (!cpu_online(cpu))
+	if (!cpumask_test_cpu(cpu, &cpu_setup_mask))
 		goto out;
 	cpumask_set_cpu(cpu, &mask);
 	if (topology_mode != TOPOLOGY_MODE_HW)
 		goto out;
 	cpu -= cpu % (smp_cpu_mtid + 1);
-	for (i = 0; i <= smp_cpu_mtid; i++)
-		if (cpu_present(cpu + i))
+	for (i = 0; i <= smp_cpu_mtid; i++) {
+		if (cpumask_test_cpu(cpu + i, &cpu_setup_mask))
 			cpumask_set_cpu(cpu + i, &mask);
-	cpumask_and(&mask, &mask, cpu_online_mask);
+	}
 out:
 	cpumask_copy(dst, &mask);
 }
@@ -569,6 +569,7 @@ void __init topology_init_early(void)
 	alloc_masks(info, &book_info, 2);
 	alloc_masks(info, &drawer_info, 3);
 out:
+	cpumask_set_cpu(0, &cpu_setup_mask);
 	__arch_update_cpu_topology();
 	__arch_update_dedicated_flag(NULL);
 }
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index d548d60caed2..16256e17a544 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -419,13 +419,13 @@ static unsigned long deliverable_irqs(struct kvm_vcpu *vcpu)
 static void __set_cpu_idle(struct kvm_vcpu *vcpu)
 {
 	kvm_s390_set_cpuflags(vcpu, CPUSTAT_WAIT);
-	set_bit(vcpu->vcpu_id, vcpu->kvm->arch.idle_mask);
+	set_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask);
 }
 
 static void __unset_cpu_idle(struct kvm_vcpu *vcpu)
 {
 	kvm_s390_clear_cpuflags(vcpu, CPUSTAT_WAIT);
-	clear_bit(vcpu->vcpu_id, vcpu->kvm->arch.idle_mask);
+	clear_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask);
 }
 
 static void __reset_intercept_indicators(struct kvm_vcpu *vcpu)
@@ -3050,18 +3050,18 @@ int kvm_s390_get_irq_state(struct kvm_vcpu *vcpu, __u8 __user *buf, int len)
 
 static void __airqs_kick_single_vcpu(struct kvm *kvm, u8 deliverable_mask)
 {
-	int vcpu_id, online_vcpus = atomic_read(&kvm->online_vcpus);
+	int vcpu_idx, online_vcpus = atomic_read(&kvm->online_vcpus);
 	struct kvm_s390_gisa_interrupt *gi = &kvm->arch.gisa_int;
 	struct kvm_vcpu *vcpu;
 
-	for_each_set_bit(vcpu_id, kvm->arch.idle_mask, online_vcpus) {
-		vcpu = kvm_get_vcpu(kvm, vcpu_id);
+	for_each_set_bit(vcpu_idx, kvm->arch.idle_mask, online_vcpus) {
+		vcpu = kvm_get_vcpu(kvm, vcpu_idx);
 		if (psw_ioint_disabled(vcpu))
 			continue;
 		deliverable_mask &= (u8)(vcpu->arch.sie_block->gcr[6] >> 24);
 		if (deliverable_mask) {
 			/* lately kicked but not yet running */
-			if (test_and_set_bit(vcpu_id, gi->kicked_mask))
+			if (test_and_set_bit(vcpu_idx, gi->kicked_mask))
 				return;
 			kvm_s390_vcpu_wakeup(vcpu);
 			return;
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index efda0615741f..752a0ffab9bf 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -66,8 +66,6 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	STATS_DESC_COUNTER(VM, inject_service_signal),
 	STATS_DESC_COUNTER(VM, inject_virtio)
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -174,8 +172,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, instruction_diagnose_other),
 	STATS_DESC_COUNTER(VCPU, pfault_sync)
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -1953,7 +1949,7 @@ out:
 static int gfn_to_memslot_approx(struct kvm_memslots *slots, gfn_t gfn)
 {
 	int start = 0, end = slots->used_slots;
-	int slot = atomic_read(&slots->lru_slot);
+	int slot = atomic_read(&slots->last_used_slot);
 	struct kvm_memory_slot *memslots = slots->memslots;
 
 	if (gfn >= memslots[slot].base_gfn &&
@@ -1974,7 +1970,7 @@ static int gfn_to_memslot_approx(struct kvm_memslots *slots, gfn_t gfn)
 
 	if (gfn >= memslots[start].base_gfn &&
 	    gfn < memslots[start].base_gfn + memslots[start].npages) {
-		atomic_set(&slots->lru_slot, start);
+		atomic_set(&slots->last_used_slot, start);
 	}
 
 	return start;
@@ -3224,6 +3220,8 @@ static int kvm_s390_vcpu_setup(struct kvm_vcpu *vcpu)
 		vcpu->arch.sie_block->ecb |= ECB_SRSI;
 	if (test_kvm_facility(vcpu->kvm, 73))
 		vcpu->arch.sie_block->ecb |= ECB_TE;
+	if (!kvm_is_ucontrol(vcpu->kvm))
+		vcpu->arch.sie_block->ecb |= ECB_SPECI;
 
 	if (test_kvm_facility(vcpu->kvm, 8) && vcpu->kvm->arch.use_pfmfi)
 		vcpu->arch.sie_block->ecb2 |= ECB2_PFMFI;
@@ -4068,7 +4066,7 @@ static int vcpu_pre_run(struct kvm_vcpu *vcpu)
 		kvm_s390_patch_guest_per_regs(vcpu);
 	}
 
-	clear_bit(vcpu->vcpu_id, vcpu->kvm->arch.gisa_int.kicked_mask);
+	clear_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.gisa_int.kicked_mask);
 
 	vcpu->arch.sie_block->icptcode = 0;
 	cpuflags = atomic_read(&vcpu->arch.sie_block->cpuflags);
diff --git a/arch/s390/kvm/kvm-s390.h b/arch/s390/kvm/kvm-s390.h
index 9fad25109b0d..ecd741ee3276 100644
--- a/arch/s390/kvm/kvm-s390.h
+++ b/arch/s390/kvm/kvm-s390.h
@@ -79,7 +79,7 @@ static inline int is_vcpu_stopped(struct kvm_vcpu *vcpu)
 
 static inline int is_vcpu_idle(struct kvm_vcpu *vcpu)
 {
-	return test_bit(vcpu->vcpu_id, vcpu->kvm->arch.idle_mask);
+	return test_bit(kvm_vcpu_get_idx(vcpu), vcpu->kvm->arch.idle_mask);
 }
 
 static inline int kvm_is_ucontrol(struct kvm *kvm)
diff --git a/arch/s390/kvm/vsie.c b/arch/s390/kvm/vsie.c
index 4002a24bc43a..acda4b6fc851 100644
--- a/arch/s390/kvm/vsie.c
+++ b/arch/s390/kvm/vsie.c
@@ -510,6 +510,8 @@ static int shadow_scb(struct kvm_vcpu *vcpu, struct vsie_page *vsie_page)
 			prefix_unmapped(vsie_page);
 		scb_s->ecb |= ECB_TE;
 	}
+	/* specification exception interpretation */
+	scb_s->ecb |= scb_o->ecb & ECB_SPECI;
 	/* branch prediction */
 	if (test_kvm_facility(vcpu->kvm, 82))
 		scb_s->fpf |= scb_o->fpf & FPF_BPBC;
diff --git a/arch/s390/lib/uaccess.c b/arch/s390/lib/uaccess.c
index 94ca99bde59d..a596e69d3c47 100644
--- a/arch/s390/lib/uaccess.c
+++ b/arch/s390/lib/uaccess.c
@@ -204,69 +204,6 @@ unsigned long raw_copy_to_user(void __user *to, const void *from, unsigned long
 }
 EXPORT_SYMBOL(raw_copy_to_user);
 
-static inline unsigned long copy_in_user_mvcos(void __user *to, const void __user *from,
-					       unsigned long size)
-{
-	unsigned long tmp1, tmp2;
-
-	tmp1 = -4096UL;
-	/* FIXME: copy with reduced length. */
-	asm volatile(
-		"   lgr	  0,%[spec]\n"
-		"0: .insn ss,0xc80000000000,0(%0,%1),0(%2),0\n"
-		"   jz	  2f\n"
-		"1: algr  %0,%3\n"
-		"   slgr  %1,%3\n"
-		"   slgr  %2,%3\n"
-		"   j	  0b\n"
-		"2:slgr  %0,%0\n"
-		"3: \n"
-		EX_TABLE(0b,3b)
-		: "+a" (size), "+a" (to), "+a" (from), "+a" (tmp1), "=a" (tmp2)
-		: [spec] "d" (0x810081UL)
-		: "cc", "memory", "0");
-	return size;
-}
-
-static inline unsigned long copy_in_user_mvc(void __user *to, const void __user *from,
-					     unsigned long size)
-{
-	unsigned long tmp1;
-
-	asm volatile(
-		"   sacf  256\n"
-		"   aghi  %0,-1\n"
-		"   jo	  5f\n"
-		"   bras  %3,3f\n"
-		"0: aghi  %0,257\n"
-		"1: mvc	  0(1,%1),0(%2)\n"
-		"   la	  %1,1(%1)\n"
-		"   la	  %2,1(%2)\n"
-		"   aghi  %0,-1\n"
-		"   jnz	  1b\n"
-		"   j	  5f\n"
-		"2: mvc	  0(256,%1),0(%2)\n"
-		"   la	  %1,256(%1)\n"
-		"   la	  %2,256(%2)\n"
-		"3: aghi  %0,-256\n"
-		"   jnm	  2b\n"
-		"4: ex	  %0,1b-0b(%3)\n"
-		"5: slgr  %0,%0\n"
-		"6: sacf  768\n"
-		EX_TABLE(1b,6b) EX_TABLE(2b,0b) EX_TABLE(4b,0b)
-		: "+a" (size), "+a" (to), "+a" (from), "=a" (tmp1)
-		: : "cc", "memory");
-	return size;
-}
-
-unsigned long raw_copy_in_user(void __user *to, const void __user *from, unsigned long n)
-{
-	if (copy_with_mvcos())
-		return copy_in_user_mvcos(to, from, n);
-	return copy_in_user_mvc(to, from, n);
-}
-EXPORT_SYMBOL(raw_copy_in_user);
-
 static inline unsigned long clear_user_mvcos(void __user *to, unsigned long size)
 {
 	unsigned long tmp1, tmp2;
diff --git a/arch/s390/mm/fault.c b/arch/s390/mm/fault.c
index a834e4672f72..212632d57db9 100644
--- a/arch/s390/mm/fault.c
+++ b/arch/s390/mm/fault.c
@@ -822,7 +822,7 @@ void do_secure_storage_access(struct pt_regs *regs)
 		break;
 	case KERNEL_FAULT:
 		page = phys_to_page(addr);
-		if (unlikely(!try_get_compound_head(page, 1)))
+		if (unlikely(!try_get_page(page)))
 			break;
 		rc = arch_make_page_accessible(page);
 		put_page(page);
diff --git a/arch/s390/mm/gmap.c b/arch/s390/mm/gmap.c
index 9bb2c7512cd5..4d3b33ce81c6 100644
--- a/arch/s390/mm/gmap.c
+++ b/arch/s390/mm/gmap.c
@@ -27,7 +27,6 @@
 
 /**
  * gmap_alloc - allocate and initialize a guest address space
- * @mm: pointer to the parent mm_struct
  * @limit: maximum address of the gmap address space
  *
  * Returns a guest address space structure.
@@ -504,7 +503,7 @@ EXPORT_SYMBOL_GPL(gmap_translate);
 
 /**
  * gmap_unlink - disconnect a page table from the gmap shadow tables
- * @gmap: pointer to guest mapping meta data structure
+ * @mm: pointer to the parent mm_struct
  * @table: pointer to the host page table
  * @vmaddr: vm address associated with the host page table
  */
@@ -527,7 +526,7 @@ static void gmap_pmdp_xchg(struct gmap *gmap, pmd_t *old, pmd_t new,
 			   unsigned long gaddr);
 
 /**
- * gmap_link - set up shadow page tables to connect a host to a guest address
+ * __gmap_link - set up shadow page tables to connect a host to a guest address
  * @gmap: pointer to guest mapping meta data structure
  * @gaddr: guest address
  * @vmaddr: vm address
@@ -1971,7 +1970,7 @@ out_free:
 EXPORT_SYMBOL_GPL(gmap_shadow_sgt);
 
 /**
- * gmap_shadow_lookup_pgtable - find a shadow page table
+ * gmap_shadow_pgt_lookup - find a shadow page table
  * @sg: pointer to the shadow guest address space structure
  * @saddr: the address in the shadow aguest address space
  * @pgt: parent gmap address of the page table to get shadowed
@@ -2165,7 +2164,7 @@ int gmap_shadow_page(struct gmap *sg, unsigned long saddr, pte_t pte)
 }
 EXPORT_SYMBOL_GPL(gmap_shadow_page);
 
-/**
+/*
  * gmap_shadow_notify - handle notifications for shadow gmap
  *
  * Called with sg->parent->shadow_lock.
@@ -2225,7 +2224,7 @@ static void gmap_shadow_notify(struct gmap *sg, unsigned long vmaddr,
 /**
  * ptep_notify - call all invalidation callbacks for a specific pte.
  * @mm: pointer to the process mm_struct
- * @addr: virtual address in the process address space
+ * @vmaddr: virtual address in the process address space
  * @pte: pointer to the page table entry
  * @bits: bits from the pgste that caused the notify call
  *
diff --git a/arch/s390/mm/init.c b/arch/s390/mm/init.c
index f14e7e61cd8e..a04faf49001a 100644
--- a/arch/s390/mm/init.c
+++ b/arch/s390/mm/init.c
@@ -307,8 +307,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	return rc;
 }
 
-void arch_remove_memory(int nid, u64 start, u64 size,
-			struct vmem_altmap *altmap)
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index eec3a9d7176e..034721a68d8f 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -834,7 +834,7 @@ int set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
 }
 EXPORT_SYMBOL(set_guest_storage_key);
 
-/**
+/*
  * Conditionally set a guest storage key (handling csske).
  * oldkey will be updated when either mr or mc is set and a pointer is given.
  *
@@ -867,7 +867,7 @@ int cond_set_guest_storage_key(struct mm_struct *mm, unsigned long addr,
 }
 EXPORT_SYMBOL(cond_set_guest_storage_key);
 
-/**
+/*
  * Reset a guest reference bit (rrbe), returning the reference and changed bit.
  *
  * Returns < 0 in case of error, otherwise the cc to be reported to the guest.
diff --git a/arch/s390/pci/pci_clp.c b/arch/s390/pci/pci_clp.c
index 51dc2215a2b7..be077b39da33 100644
--- a/arch/s390/pci/pci_clp.c
+++ b/arch/s390/pci/pci_clp.c
@@ -383,8 +383,8 @@ static int clp_find_pci(struct clp_req_rsp_list_pci *rrb, u32 fid,
 		rc = clp_list_pci_req(rrb, &resume_token, &nentries);
 		if (rc)
 			return rc;
+		fh_list = rrb->response.fh_list;
 		for (i = 0; i < nentries; i++) {
-			fh_list = rrb->response.fh_list;
 			if (fh_list[i].fid == fid) {
 				*entry = fh_list[i];
 				return 0;
@@ -449,14 +449,17 @@ int clp_get_state(u32 fid, enum zpci_state *state)
 	struct clp_fh_list_entry entry;
 	int rc;
 
-	*state = ZPCI_FN_STATE_RESERVED;
 	rrb = clp_alloc_block(GFP_ATOMIC);
 	if (!rrb)
 		return -ENOMEM;
 
 	rc = clp_find_pci(rrb, fid, &entry);
-	if (!rc)
+	if (!rc) {
 		*state = entry.config_state;
+	} else if (rc == -ENODEV) {
+		*state = ZPCI_FN_STATE_RESERVED;
+		rc = 0;
+	}
 
 	clp_free_block(rrb);
 	return rc;
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index f37280e805ea..6904f4bdbf00 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -69,6 +69,7 @@ config SUPERH
 	select RTC_LIB
 	select SET_FS
 	select SPARSE_IRQ
+	select TRACE_IRQFLAGS_SUPPORT
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
diff --git a/arch/sh/Kconfig.debug b/arch/sh/Kconfig.debug
index 28a43d63bde1..958f790273ab 100644
--- a/arch/sh/Kconfig.debug
+++ b/arch/sh/Kconfig.debug
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config SH_STANDARD_BIOS
 	bool "Use LinuxSH standard BIOS"
 	help
diff --git a/arch/sh/mm/init.c b/arch/sh/mm/init.c
index ce26c7f8950a..506784702430 100644
--- a/arch/sh/mm/init.c
+++ b/arch/sh/mm/init.c
@@ -414,8 +414,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	return ret;
 }
 
-void arch_remove_memory(int nid, u64 start, u64 size,
-			struct vmem_altmap *altmap)
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = PFN_DOWN(start);
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index fa650e4eadba..b120ed947f50 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -47,6 +47,7 @@ config SPARC
 	select NEED_DMA_MAP_STATE
 	select NEED_SG_DMA_LENGTH
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 
 config SPARC32
 	def_bool !64BIT
diff --git a/arch/sparc/Kconfig.debug b/arch/sparc/Kconfig.debug
index 50a918d496c8..6b2bec1888b3 100644
--- a/arch/sparc/Kconfig.debug
+++ b/arch/sparc/Kconfig.debug
@@ -1,9 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
 config DEBUG_DCFLUSH
 	bool "D-cache flush debugging"
 	depends on SPARC64 && DEBUG_KERNEL
diff --git a/arch/sparc/include/asm/compat.h b/arch/sparc/include/asm/compat.h
index 8b63410e830f..bd949fcf9d63 100644
--- a/arch/sparc/include/asm/compat.h
+++ b/arch/sparc/include/asm/compat.h
@@ -116,25 +116,6 @@ struct compat_statfs {
 
 #define COMPAT_OFF_T_MAX	0x7fffffff
 
-#ifdef CONFIG_COMPAT
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	struct pt_regs *regs = current_thread_info()->kregs;
-	unsigned long usp = regs->u_regs[UREG_I6];
-
-	if (test_thread_64bit_stack(usp))
-		usp += STACK_BIAS;
-
-	if (test_thread_flag(TIF_32BIT))
-		usp &= 0xffffffffUL;
-
-	usp -= len;
-	usp &= ~0x7UL;
-
-	return (void __user *) usp;
-}
-#endif
-
 struct compat_ipc64_perm {
 	compat_key_t key;
 	__compat_uid32_t uid;
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 093849bfda50..d1cc410d2f64 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -455,7 +455,7 @@ static unsigned long clone_stackframe(unsigned long csp, unsigned long psp)
 
 	distance = fp - psp;
 	rval = (csp - distance);
-	if (copy_in_user((void __user *) rval, (void __user *) psp, distance))
+	if (raw_copy_in_user((void __user *)rval, (void __user *)psp, distance))
 		rval = 0;
 	else if (!stack_64bit) {
 		if (put_user(((u32)csp),
diff --git a/arch/sparc/kernel/signal32.c b/arch/sparc/kernel/signal32.c
index 4276b9e003ca..6cc124a3bb98 100644
--- a/arch/sparc/kernel/signal32.c
+++ b/arch/sparc/kernel/signal32.c
@@ -435,9 +435,9 @@ static int setup_frame32(struct ksignal *ksig, struct pt_regs *regs,
 			      (_COMPAT_NSIG_WORDS - 1) * sizeof(unsigned int));
 
 	if (!wsaved) {
-		err |= copy_in_user((u32 __user *)sf,
-				    (u32 __user *)(regs->u_regs[UREG_FP]),
-				    sizeof(struct reg_window32));
+		err |= raw_copy_in_user((u32 __user *)sf,
+					(u32 __user *)(regs->u_regs[UREG_FP]),
+					sizeof(struct reg_window32));
 	} else {
 		struct reg_window *rp;
 
@@ -567,9 +567,9 @@ static int setup_rt_frame32(struct ksignal *ksig, struct pt_regs *regs,
 	err |= put_compat_sigset(&sf->mask, oldset, sizeof(compat_sigset_t));
 
 	if (!wsaved) {
-		err |= copy_in_user((u32 __user *)sf,
-				    (u32 __user *)(regs->u_regs[UREG_FP]),
-				    sizeof(struct reg_window32));
+		err |= raw_copy_in_user((u32 __user *)sf,
+					(u32 __user *)(regs->u_regs[UREG_FP]),
+					sizeof(struct reg_window32));
 	} else {
 		struct reg_window *rp;
 
diff --git a/arch/sparc/kernel/signal_64.c b/arch/sparc/kernel/signal_64.c
index cea23cf95600..2a78d2af1265 100644
--- a/arch/sparc/kernel/signal_64.c
+++ b/arch/sparc/kernel/signal_64.c
@@ -406,10 +406,10 @@ setup_rt_frame(struct ksignal *ksig, struct pt_regs *regs)
 	err |= copy_to_user(&sf->mask, sigmask_to_save(), sizeof(sigset_t));
 
 	if (!wsaved) {
-		err |= copy_in_user((u64 __user *)sf,
-				    (u64 __user *)(regs->u_regs[UREG_FP] +
-						   STACK_BIAS),
-				    sizeof(struct reg_window));
+		err |= raw_copy_in_user((u64 __user *)sf,
+					(u64 __user *)(regs->u_regs[UREG_FP] +
+					   STACK_BIAS),
+					sizeof(struct reg_window));
 	} else {
 		struct reg_window *rp;
 
diff --git a/arch/sparc/kernel/syscalls/syscall.tbl b/arch/sparc/kernel/syscalls/syscall.tbl
index 7893104718c2..c37764dc764d 100644
--- a/arch/sparc/kernel/syscalls/syscall.tbl
+++ b/arch/sparc/kernel/syscalls/syscall.tbl
@@ -365,12 +365,12 @@
 299	common	unshare			sys_unshare
 300	common	set_robust_list		sys_set_robust_list		compat_sys_set_robust_list
 301	common	get_robust_list		sys_get_robust_list		compat_sys_get_robust_list
-302	common	migrate_pages		sys_migrate_pages		compat_sys_migrate_pages
-303	common	mbind			sys_mbind			compat_sys_mbind
-304	common	get_mempolicy		sys_get_mempolicy		compat_sys_get_mempolicy
-305	common	set_mempolicy		sys_set_mempolicy		compat_sys_set_mempolicy
+302	common	migrate_pages		sys_migrate_pages
+303	common	mbind			sys_mbind
+304	common	get_mempolicy		sys_get_mempolicy
+305	common	set_mempolicy		sys_set_mempolicy
 306	common	kexec_load		sys_kexec_load			compat_sys_kexec_load
-307	common	move_pages		sys_move_pages			compat_sys_move_pages
+307	common	move_pages		sys_move_pages
 308	common	getcpu			sys_getcpu
 309	common	epoll_pwait		sys_epoll_pwait			compat_sys_epoll_pwait
 310	32	utimensat		sys_utimensat_time32
diff --git a/arch/um/Kconfig b/arch/um/Kconfig
index 77e66d3719f6..c18b45f75d41 100644
--- a/arch/um/Kconfig
+++ b/arch/um/Kconfig
@@ -22,7 +22,9 @@ config UML
 	select GENERIC_CPU_DEVICES
 	select HAVE_GCC_PLUGINS
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 	select TTY # Needed for line.c
+	select HAVE_ARCH_VMAP_STACK
 
 config MMU
 	bool
@@ -52,10 +54,6 @@ config ISA
 config SBUS
 	bool
 
-config TRACE_IRQFLAGS_SUPPORT
-	bool
-	default y
-
 config LOCKDEP_SUPPORT
 	bool
 	default y
diff --git a/arch/um/drivers/virt-pci.c b/arch/um/drivers/virt-pci.c
index 0b802834f40a..c08066633023 100644
--- a/arch/um/drivers/virt-pci.c
+++ b/arch/um/drivers/virt-pci.c
@@ -56,6 +56,13 @@ static unsigned long um_pci_msi_used[BITS_TO_LONGS(MAX_MSI_VECTORS)];
 
 #define UM_VIRT_PCI_MAXDELAY 40000
 
+struct um_pci_message_buffer {
+	struct virtio_pcidev_msg hdr;
+	u8 data[8];
+};
+
+static struct um_pci_message_buffer __percpu *um_pci_msg_bufs;
+
 static int um_pci_send_cmd(struct um_pci_device *dev,
 			   struct virtio_pcidev_msg *cmd,
 			   unsigned int cmd_size,
@@ -68,11 +75,12 @@ static int um_pci_send_cmd(struct um_pci_device *dev,
 		[1] = extra ? &extra_sg : &in_sg,
 		[2] = extra ? &in_sg : NULL,
 	};
+	struct um_pci_message_buffer *buf;
 	int delay_count = 0;
 	int ret, len;
 	bool posted;
 
-	if (WARN_ON(cmd_size < sizeof(*cmd)))
+	if (WARN_ON(cmd_size < sizeof(*cmd) || cmd_size > sizeof(*buf)))
 		return -EINVAL;
 
 	switch (cmd->op) {
@@ -88,6 +96,9 @@ static int um_pci_send_cmd(struct um_pci_device *dev,
 		break;
 	}
 
+	buf = get_cpu_var(um_pci_msg_bufs);
+	memcpy(buf, cmd, cmd_size);
+
 	if (posted) {
 		u8 *ncmd = kmalloc(cmd_size + extra_size, GFP_ATOMIC);
 
@@ -102,7 +113,10 @@ static int um_pci_send_cmd(struct um_pci_device *dev,
 		} else {
 			/* try without allocating memory */
 			posted = false;
+			cmd = (void *)buf;
 		}
+	} else {
+		cmd = (void *)buf;
 	}
 
 	sg_init_one(&out_sg, cmd, cmd_size);
@@ -118,11 +132,12 @@ static int um_pci_send_cmd(struct um_pci_device *dev,
 				posted ? cmd : HANDLE_NO_FREE(cmd),
 				GFP_ATOMIC);
 	if (ret)
-		return ret;
+		goto out;
 
 	if (posted) {
 		virtqueue_kick(dev->cmd_vq);
-		return 0;
+		ret = 0;
+		goto out;
 	}
 
 	/* kick and poll for getting a response on the queue */
@@ -148,6 +163,8 @@ static int um_pci_send_cmd(struct um_pci_device *dev,
 	}
 	clear_bit(UM_PCI_STAT_WAITING, &dev->status);
 
+out:
+	put_cpu_var(um_pci_msg_bufs);
 	return ret;
 }
 
@@ -161,12 +178,17 @@ static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset,
 		.size = size,
 		.addr = offset,
 	};
-	/* maximum size - we may only use parts of it */
-	u8 data[8];
+	/* buf->data is maximum size - we may only use parts of it */
+	struct um_pci_message_buffer *buf;
+	u8 *data;
+	unsigned long ret = ~0ULL;
 
 	if (!dev)
 		return ~0ULL;
 
+	buf = get_cpu_var(um_pci_msg_bufs);
+	data = buf->data;
+
 	memset(data, 0xff, sizeof(data));
 
 	switch (size) {
@@ -179,27 +201,34 @@ static unsigned long um_pci_cfgspace_read(void *priv, unsigned int offset,
 		break;
 	default:
 		WARN(1, "invalid config space read size %d\n", size);
-		return ~0ULL;
+		goto out;
 	}
 
-	if (um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0,
-			    data, sizeof(data)))
-		return ~0ULL;
+	if (um_pci_send_cmd(dev, &hdr, sizeof(hdr), NULL, 0, data, 8))
+		goto out;
 
 	switch (size) {
 	case 1:
-		return data[0];
+		ret = data[0];
+		break;
 	case 2:
-		return le16_to_cpup((void *)data);
+		ret = le16_to_cpup((void *)data);
+		break;
 	case 4:
-		return le32_to_cpup((void *)data);
+		ret = le32_to_cpup((void *)data);
+		break;
 #ifdef CONFIG_64BIT
 	case 8:
-		return le64_to_cpup((void *)data);
+		ret = le64_to_cpup((void *)data);
+		break;
 #endif
 	default:
-		return ~0ULL;
+		break;
 	}
+
+out:
+	put_cpu_var(um_pci_msg_bufs);
+	return ret;
 }
 
 static void um_pci_cfgspace_write(void *priv, unsigned int offset, int size,
@@ -272,8 +301,13 @@ static void um_pci_bar_copy_from(void *priv, void *buffer,
 static unsigned long um_pci_bar_read(void *priv, unsigned int offset,
 				     int size)
 {
-	/* maximum size - we may only use parts of it */
-	u8 data[8];
+	/* buf->data is maximum size - we may only use parts of it */
+	struct um_pci_message_buffer *buf;
+	u8 *data;
+	unsigned long ret = ~0ULL;
+
+	buf = get_cpu_var(um_pci_msg_bufs);
+	data = buf->data;
 
 	switch (size) {
 	case 1:
@@ -285,25 +319,33 @@ static unsigned long um_pci_bar_read(void *priv, unsigned int offset,
 		break;
 	default:
 		WARN(1, "invalid config space read size %d\n", size);
-		return ~0ULL;
+		goto out;
 	}
 
 	um_pci_bar_copy_from(priv, data, offset, size);
 
 	switch (size) {
 	case 1:
-		return data[0];
+		ret = data[0];
+		break;
 	case 2:
-		return le16_to_cpup((void *)data);
+		ret = le16_to_cpup((void *)data);
+		break;
 	case 4:
-		return le32_to_cpup((void *)data);
+		ret = le32_to_cpup((void *)data);
+		break;
 #ifdef CONFIG_64BIT
 	case 8:
-		return le64_to_cpup((void *)data);
+		ret = le64_to_cpup((void *)data);
+		break;
 #endif
 	default:
-		return ~0ULL;
+		break;
 	}
+
+out:
+	put_cpu_var(um_pci_msg_bufs);
+	return ret;
 }
 
 static void um_pci_bar_copy_to(void *priv, unsigned int offset,
@@ -810,7 +852,7 @@ void *pci_root_bus_fwnode(struct pci_bus *bus)
 	return um_pci_fwnode;
 }
 
-int um_pci_init(void)
+static int um_pci_init(void)
 {
 	int err, i;
 
@@ -823,10 +865,16 @@ int um_pci_init(void)
 		 "No virtio device ID configured for PCI - no PCI support\n"))
 		return 0;
 
-	bridge = pci_alloc_host_bridge(0);
-	if (!bridge)
+	um_pci_msg_bufs = alloc_percpu(struct um_pci_message_buffer);
+	if (!um_pci_msg_bufs)
 		return -ENOMEM;
 
+	bridge = pci_alloc_host_bridge(0);
+	if (!bridge) {
+		err = -ENOMEM;
+		goto free;
+	}
+
 	um_pci_fwnode = irq_domain_alloc_named_fwnode("um-pci");
 	if (!um_pci_fwnode) {
 		err = -ENOMEM;
@@ -878,18 +926,22 @@ free:
 		irq_domain_remove(um_pci_inner_domain);
 	if (um_pci_fwnode)
 		irq_domain_free_fwnode(um_pci_fwnode);
-	pci_free_resource_list(&bridge->windows);
-	pci_free_host_bridge(bridge);
+	if (bridge) {
+		pci_free_resource_list(&bridge->windows);
+		pci_free_host_bridge(bridge);
+	}
+	free_percpu(um_pci_msg_bufs);
 	return err;
 }
 module_init(um_pci_init);
 
-void um_pci_exit(void)
+static void um_pci_exit(void)
 {
 	unregister_virtio_driver(&um_pci_virtio_driver);
 	irq_domain_remove(um_pci_msi_domain);
 	irq_domain_remove(um_pci_inner_domain);
 	pci_free_resource_list(&bridge->windows);
 	pci_free_host_bridge(bridge);
+	free_percpu(um_pci_msg_bufs);
 }
 module_exit(um_pci_exit);
diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index 4412d6febade..d51e445df797 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -27,6 +27,7 @@
 #include <linux/virtio_config.h>
 #include <linux/virtio_ring.h>
 #include <linux/time-internal.h>
+#include <linux/virtio-uml.h>
 #include <shared/as-layout.h>
 #include <irq_kern.h>
 #include <init.h>
@@ -1139,7 +1140,7 @@ static int virtio_uml_probe(struct platform_device *pdev)
 		rc = os_connect_socket(pdata->socket_path);
 	} while (rc == -EINTR);
 	if (rc < 0)
-		return rc;
+		goto error_free;
 	vu_dev->sock = rc;
 
 	spin_lock_init(&vu_dev->sock_lock);
@@ -1160,6 +1161,8 @@ static int virtio_uml_probe(struct platform_device *pdev)
 
 error_init:
 	os_close_file(vu_dev->sock);
+error_free:
+	kfree(vu_dev);
 	return rc;
 }
 
diff --git a/arch/um/kernel/skas/clone.c b/arch/um/kernel/skas/clone.c
index 5afac0fef24e..ff5061f29167 100644
--- a/arch/um/kernel/skas/clone.c
+++ b/arch/um/kernel/skas/clone.c
@@ -24,8 +24,7 @@
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_clone_handler(void)
 {
-	int stack;
-	struct stub_data *data = (void *) ((unsigned long)&stack & ~(UM_KERN_PAGE_SIZE - 1));
+	struct stub_data *data = get_stub_page();
 	long err;
 
 	err = stub_syscall2(__NR_clone, CLONE_PARENT | CLONE_FILES | SIGCHLD,
diff --git a/arch/um/kernel/trap.c b/arch/um/kernel/trap.c
index ad12f78bda7e..3198c4767387 100644
--- a/arch/um/kernel/trap.c
+++ b/arch/um/kernel/trap.c
@@ -311,7 +311,3 @@ void winch(int sig, struct siginfo *unused_si, struct uml_pt_regs *regs)
 {
 	do_IRQ(WINCH_IRQ, regs);
 }
-
-void trap_init(void)
-{
-}
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 1146b85d708b..4e001bbbb425 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -259,6 +259,7 @@ config X86
 	select STACK_VALIDATION			if HAVE_STACK_VALIDATION && (HAVE_STATIC_CALL_INLINE || RETPOLINE)
 	select SYSCTL_EXCEPTION_TRACE
 	select THREAD_INFO_IN_TASK
+	select TRACE_IRQFLAGS_SUPPORT
 	select USER_STACKTRACE_SUPPORT
 	select VIRT_TO_BUS
 	select HAVE_ARCH_KCSAN			if X86_64
diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug
index 80b57e7f4947..d3a6f74a94bd 100644
--- a/arch/x86/Kconfig.debug
+++ b/arch/x86/Kconfig.debug
@@ -1,8 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config TRACE_IRQFLAGS_NMI_SUPPORT
 	def_bool y
 
diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig
index 9c9c4a888b1d..e81885384f60 100644
--- a/arch/x86/configs/i386_defconfig
+++ b/arch/x86/configs/i386_defconfig
@@ -156,7 +156,6 @@ CONFIG_FORCEDETH=y
 CONFIG_8139TOO=y
 # CONFIG_8139TOO_PIO is not set
 CONFIG_R8169=y
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TABLET=y
diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig
index b60bd2d86034..e8a7a0af2bda 100644
--- a/arch/x86/configs/x86_64_defconfig
+++ b/arch/x86/configs/x86_64_defconfig
@@ -148,7 +148,6 @@ CONFIG_SKY2=y
 CONFIG_FORCEDETH=y
 CONFIG_8139TOO=y
 CONFIG_R8169=y
-CONFIG_INPUT_POLLDEV=y
 CONFIG_INPUT_EVDEV=y
 CONFIG_INPUT_JOYSTICK=y
 CONFIG_INPUT_TABLET=y
diff --git a/arch/x86/entry/syscalls/syscall_32.tbl b/arch/x86/entry/syscalls/syscall_32.tbl
index 61f18b72552b..960a021d543e 100644
--- a/arch/x86/entry/syscalls/syscall_32.tbl
+++ b/arch/x86/entry/syscalls/syscall_32.tbl
@@ -286,7 +286,7 @@
 272	i386	fadvise64_64		sys_ia32_fadvise64_64
 273	i386	vserver
 274	i386	mbind			sys_mbind
-275	i386	get_mempolicy		sys_get_mempolicy		compat_sys_get_mempolicy
+275	i386	get_mempolicy		sys_get_mempolicy
 276	i386	set_mempolicy		sys_set_mempolicy
 277	i386	mq_open			sys_mq_open			compat_sys_mq_open
 278	i386	mq_unlink		sys_mq_unlink
@@ -328,7 +328,7 @@
 314	i386	sync_file_range		sys_ia32_sync_file_range
 315	i386	tee			sys_tee
 316	i386	vmsplice		sys_vmsplice
-317	i386	move_pages		sys_move_pages			compat_sys_move_pages
+317	i386	move_pages		sys_move_pages
 318	i386	getcpu			sys_getcpu
 319	i386	epoll_pwait		sys_epoll_pwait
 320	i386	utimensat		sys_utimensat_time32
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 807b6a1de8e8..18b5500ea8bf 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -398,7 +398,7 @@
 530	x32	set_robust_list		compat_sys_set_robust_list
 531	x32	get_robust_list		compat_sys_get_robust_list
 532	x32	vmsplice		sys_vmsplice
-533	x32	move_pages		compat_sys_move_pages
+533	x32	move_pages		sys_move_pages
 534	x32	preadv			compat_sys_preadv64
 535	x32	pwritev			compat_sys_pwritev64
 536	x32	rt_tgsigqueueinfo	compat_sys_rt_tgsigqueueinfo
diff --git a/arch/x86/include/asm/compat.h b/arch/x86/include/asm/compat.h
index 4ae01cdb99de..7516e4199b3c 100644
--- a/arch/x86/include/asm/compat.h
+++ b/arch/x86/include/asm/compat.h
@@ -156,19 +156,6 @@ struct compat_shmid64_ds {
 	(!!(task_pt_regs(current)->orig_ax & __X32_SYSCALL_BIT))
 #endif
 
-static inline void __user *arch_compat_alloc_user_space(long len)
-{
-	compat_uptr_t sp = task_pt_regs(current)->sp;
-
-	/*
-	 * -128 for the x32 ABI redzone.  For IA32, it is not strictly
-	 * necessary, but not harmful.
-	 */
-	sp -= 128;
-
-	return (void __user *)round_down(sp - len, 16);
-}
-
 static inline bool in_x32_syscall(void)
 {
 #ifdef CONFIG_X86_X32_ABI
diff --git a/arch/x86/include/asm/kvm-x86-ops.h b/arch/x86/include/asm/kvm-x86-ops.h
index a12a4987154e..cefe1d81e2e8 100644
--- a/arch/x86/include/asm/kvm-x86-ops.h
+++ b/arch/x86/include/asm/kvm-x86-ops.h
@@ -72,7 +72,6 @@ KVM_X86_OP(enable_nmi_window)
 KVM_X86_OP(enable_irq_window)
 KVM_X86_OP(update_cr8_intercept)
 KVM_X86_OP(check_apicv_inhibit_reasons)
-KVM_X86_OP_NULL(pre_update_apicv_exec_ctrl)
 KVM_X86_OP(refresh_apicv_exec_ctrl)
 KVM_X86_OP(hwapic_irr_update)
 KVM_X86_OP(hwapic_isr_update)
diff --git a/arch/x86/include/asm/kvm_host.h b/arch/x86/include/asm/kvm_host.h
index af6ce8d4c86a..f8f48a7ec577 100644
--- a/arch/x86/include/asm/kvm_host.h
+++ b/arch/x86/include/asm/kvm_host.h
@@ -37,9 +37,21 @@
 
 #define __KVM_HAVE_ARCH_VCPU_DEBUGFS
 
-#define KVM_MAX_VCPUS 288
-#define KVM_SOFT_MAX_VCPUS 240
-#define KVM_MAX_VCPU_ID 1023
+#define KVM_MAX_VCPUS 1024
+#define KVM_SOFT_MAX_VCPUS 710
+
+/*
+ * In x86, the VCPU ID corresponds to the APIC ID, and APIC IDs
+ * might be larger than the actual number of VCPUs because the
+ * APIC ID encodes CPU topology information.
+ *
+ * In the worst case, we'll need less than one extra bit for the
+ * Core ID, and less than one extra bit for the Package (Die) ID,
+ * so ratio of 4 should be enough.
+ */
+#define KVM_VCPU_ID_RATIO 4
+#define KVM_MAX_VCPU_ID (KVM_MAX_VCPUS * KVM_VCPU_ID_RATIO)
+
 /* memory slots that are not exposed to userspace */
 #define KVM_PRIVATE_MEM_SLOTS 3
 
@@ -124,13 +136,6 @@
 #define KVM_HPAGE_MASK(x)	(~(KVM_HPAGE_SIZE(x) - 1))
 #define KVM_PAGES_PER_HPAGE(x)	(KVM_HPAGE_SIZE(x) / PAGE_SIZE)
 
-static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level)
-{
-	/* KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K) must be 0. */
-	return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
-		(base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
-}
-
 #define KVM_PERMILLE_MMU_PAGES 20
 #define KVM_MIN_ALLOC_MMU_PAGES 64UL
 #define KVM_MMU_HASH_SHIFT 12
@@ -229,7 +234,8 @@ enum x86_intercept_stage;
 	KVM_GUESTDBG_USE_HW_BP | \
 	KVM_GUESTDBG_USE_SW_BP | \
 	KVM_GUESTDBG_INJECT_BP | \
-	KVM_GUESTDBG_INJECT_DB)
+	KVM_GUESTDBG_INJECT_DB | \
+	KVM_GUESTDBG_BLOCKIRQ)
 
 
 #define PFERR_PRESENT_BIT 0
@@ -447,6 +453,7 @@ struct kvm_mmu {
 
 	u64 *pae_root;
 	u64 *pml4_root;
+	u64 *pml5_root;
 
 	/*
 	 * check zero bits on shadow page table entries, these
@@ -482,6 +489,7 @@ struct kvm_pmc {
 	 * ctrl value for fixed counters.
 	 */
 	u64 current_config;
+	bool is_paused;
 };
 
 struct kvm_pmu {
@@ -522,7 +530,6 @@ struct kvm_pmu_ops;
 enum {
 	KVM_DEBUGREG_BP_ENABLED = 1,
 	KVM_DEBUGREG_WONT_EXIT = 2,
-	KVM_DEBUGREG_RELOAD = 4,
 };
 
 struct kvm_mtrr_range {
@@ -723,7 +730,6 @@ struct kvm_vcpu_arch {
 
 	u64 reserved_gpa_bits;
 	int maxphyaddr;
-	int max_tdp_level;
 
 	/* emulate context */
 
@@ -988,6 +994,12 @@ struct kvm_hv {
 	/* How many vCPUs have VP index != vCPU index */
 	atomic_t num_mismatched_vp_indexes;
 
+	/*
+	 * How many SynICs use 'AutoEOI' feature
+	 * (protected by arch.apicv_update_lock)
+	 */
+	unsigned int synic_auto_eoi_used;
+
 	struct hv_partition_assist_pg *hv_pa_pg;
 	struct kvm_hv_syndbg hv_syndbg;
 };
@@ -1002,9 +1014,8 @@ struct msr_bitmap_range {
 /* Xen emulation context */
 struct kvm_xen {
 	bool long_mode;
-	bool shinfo_set;
 	u8 upcall_vector;
-	struct gfn_to_hva_cache shinfo_cache;
+	gfn_t shinfo_gfn;
 };
 
 enum kvm_irqchip_mode {
@@ -1061,6 +1072,9 @@ struct kvm_arch {
 	struct kvm_apic_map __rcu *apic_map;
 	atomic_t apic_map_dirty;
 
+	/* Protects apic_access_memslot_enabled and apicv_inhibit_reasons */
+	struct mutex apicv_update_lock;
+
 	bool apic_access_memslot_enabled;
 	unsigned long apicv_inhibit_reasons;
 
@@ -1213,9 +1227,17 @@ struct kvm_vm_stat {
 	u64 mmu_recycled;
 	u64 mmu_cache_miss;
 	u64 mmu_unsync;
-	u64 lpages;
+	union {
+		struct {
+			atomic64_t pages_4k;
+			atomic64_t pages_2m;
+			atomic64_t pages_1g;
+		};
+		atomic64_t pages[KVM_NR_PAGE_SIZES];
+	};
 	u64 nx_lpage_splits;
 	u64 max_mmu_page_hash_collisions;
+	u64 max_mmu_rmap_size;
 };
 
 struct kvm_vcpu_stat {
@@ -1359,7 +1381,6 @@ struct kvm_x86_ops {
 	void (*enable_irq_window)(struct kvm_vcpu *vcpu);
 	void (*update_cr8_intercept)(struct kvm_vcpu *vcpu, int tpr, int irr);
 	bool (*check_apicv_inhibit_reasons)(ulong bit);
-	void (*pre_update_apicv_exec_ctrl)(struct kvm *kvm, bool activate);
 	void (*refresh_apicv_exec_ctrl)(struct kvm_vcpu *vcpu);
 	void (*hwapic_irr_update)(struct kvm_vcpu *vcpu, int max_irr);
 	void (*hwapic_isr_update)(struct kvm_vcpu *vcpu, int isr);
@@ -1543,12 +1564,12 @@ void kvm_mmu_uninit_vm(struct kvm *kvm);
 void kvm_mmu_after_set_cpuid(struct kvm_vcpu *vcpu);
 void kvm_mmu_reset_context(struct kvm_vcpu *vcpu);
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
-				      struct kvm_memory_slot *memslot,
+				      const struct kvm_memory_slot *memslot,
 				      int start_level);
 void kvm_mmu_zap_collapsible_sptes(struct kvm *kvm,
 				   const struct kvm_memory_slot *memslot);
 void kvm_mmu_slot_leaf_clear_dirty(struct kvm *kvm,
-				   struct kvm_memory_slot *memslot);
+				   const struct kvm_memory_slot *memslot);
 void kvm_mmu_zap_all(struct kvm *kvm);
 void kvm_mmu_invalidate_mmio_sptes(struct kvm *kvm, u64 gen);
 unsigned long kvm_mmu_calculate_default_mmu_pages(struct kvm *kvm);
@@ -1744,6 +1765,9 @@ void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu);
 void kvm_request_apicv_update(struct kvm *kvm, bool activate,
 			      unsigned long bit);
 
+void __kvm_request_apicv_update(struct kvm *kvm, bool activate,
+				unsigned long bit);
+
 int kvm_emulate_hypercall(struct kvm_vcpu *vcpu);
 
 int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
@@ -1754,8 +1778,8 @@ void kvm_mmu_invalidate_gva(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu,
 void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid);
 void kvm_mmu_new_pgd(struct kvm_vcpu *vcpu, gpa_t new_pgd);
 
-void kvm_configure_mmu(bool enable_tdp, int tdp_max_root_level,
-		       int tdp_huge_page_level);
+void kvm_configure_mmu(bool enable_tdp, int tdp_forced_root_level,
+		       int tdp_max_root_level, int tdp_huge_page_level);
 
 static inline u16 kvm_read_ldt(void)
 {
@@ -1779,11 +1803,6 @@ static inline unsigned long read_msr(unsigned long msr)
 }
 #endif
 
-static inline u32 get_rdx_init_val(void)
-{
-	return 0x600; /* P6 family */
-}
-
 static inline void kvm_inject_gp(struct kvm_vcpu *vcpu, u32 error_code)
 {
 	kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
@@ -1816,31 +1835,6 @@ enum {
 #define kvm_arch_vcpu_memslots_id(vcpu) ((vcpu)->arch.hflags & HF_SMM_MASK ? 1 : 0)
 #define kvm_memslots_for_spte_role(kvm, role) __kvm_memslots(kvm, (role).smm)
 
-asmlinkage void kvm_spurious_fault(void);
-
-/*
- * Hardware virtualization extension instructions may fault if a
- * reboot turns off virtualization while processes are running.
- * Usually after catching the fault we just panic; during reboot
- * instead the instruction is ignored.
- */
-#define __kvm_handle_fault_on_reboot(insn)				\
-	"666: \n\t"							\
-	insn "\n\t"							\
-	"jmp	668f \n\t"						\
-	"667: \n\t"							\
-	"1: \n\t"							\
-	".pushsection .discard.instr_begin \n\t"			\
-	".long 1b - . \n\t"						\
-	".popsection \n\t"						\
-	"call	kvm_spurious_fault \n\t"				\
-	"1: \n\t"							\
-	".pushsection .discard.instr_end \n\t"				\
-	".long 1b - . \n\t"						\
-	".popsection \n\t"						\
-	"668: \n\t"							\
-	_ASM_EXTABLE(666b, 667b)
-
 #define KVM_ARCH_WANT_MMU_NOTIFIER
 
 int kvm_cpu_has_injectable_intr(struct kvm_vcpu *v);
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index e7265a552f4f..45697e04d771 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -58,13 +58,6 @@ raw_copy_to_user(void __user *dst, const void *src, unsigned long size)
 	return copy_user_generic((__force void *)dst, src, size);
 }
 
-static __always_inline __must_check
-unsigned long raw_copy_in_user(void __user *dst, const void __user *src, unsigned long size)
-{
-	return copy_user_generic((__force void *)dst,
-				 (__force void *)src, size);
-}
-
 extern long __copy_user_nocache(void *dst, const void __user *src,
 				unsigned size, int zerorest);
 
diff --git a/arch/x86/include/uapi/asm/kvm.h b/arch/x86/include/uapi/asm/kvm.h
index a6c327f8ad9e..2ef1f6513c68 100644
--- a/arch/x86/include/uapi/asm/kvm.h
+++ b/arch/x86/include/uapi/asm/kvm.h
@@ -295,6 +295,7 @@ struct kvm_debug_exit_arch {
 #define KVM_GUESTDBG_USE_HW_BP		0x00020000
 #define KVM_GUESTDBG_INJECT_DB		0x00040000
 #define KVM_GUESTDBG_INJECT_BP		0x00080000
+#define KVM_GUESTDBG_BLOCKIRQ		0x00100000
 
 /* for KVM_SET_GUEST_DEBUG */
 struct kvm_guest_debug_arch {
diff --git a/arch/x86/kernel/kvm.c b/arch/x86/kernel/kvm.c
index a26643dc6bd6..b656456c3a94 100644
--- a/arch/x86/kernel/kvm.c
+++ b/arch/x86/kernel/kvm.c
@@ -884,10 +884,11 @@ static void kvm_wait(u8 *ptr, u8 val)
 	} else {
 		local_irq_disable();
 
+		/* safe_halt() will enable IRQ */
 		if (READ_ONCE(*ptr) == val)
 			safe_halt();
-
-		local_irq_enable();
+		else
+			local_irq_enable();
 	}
 }
 
diff --git a/arch/x86/kvm/debugfs.c b/arch/x86/kvm/debugfs.c
index 95a98413dc32..54a83a744538 100644
--- a/arch/x86/kvm/debugfs.c
+++ b/arch/x86/kvm/debugfs.c
@@ -7,6 +7,8 @@
 #include <linux/kvm_host.h>
 #include <linux/debugfs.h>
 #include "lapic.h"
+#include "mmu.h"
+#include "mmu/mmu_internal.h"
 
 static int vcpu_get_timer_advance_ns(void *data, u64 *val)
 {
@@ -73,3 +75,112 @@ void kvm_arch_create_vcpu_debugfs(struct kvm_vcpu *vcpu, struct dentry *debugfs_
 				    &vcpu_tsc_scaling_frac_fops);
 	}
 }
+
+/*
+ * This covers statistics <1024 (11=log(1024)+1), which should be enough to
+ * cover RMAP_RECYCLE_THRESHOLD.
+ */
+#define  RMAP_LOG_SIZE  11
+
+static const char *kvm_lpage_str[KVM_NR_PAGE_SIZES] = { "4K", "2M", "1G" };
+
+static int kvm_mmu_rmaps_stat_show(struct seq_file *m, void *v)
+{
+	struct kvm_rmap_head *rmap;
+	struct kvm *kvm = m->private;
+	struct kvm_memory_slot *slot;
+	struct kvm_memslots *slots;
+	unsigned int lpage_size, index;
+	/* Still small enough to be on the stack */
+	unsigned int *log[KVM_NR_PAGE_SIZES], *cur;
+	int i, j, k, l, ret;
+
+	ret = -ENOMEM;
+	memset(log, 0, sizeof(log));
+	for (i = 0; i < KVM_NR_PAGE_SIZES; i++) {
+		log[i] = kcalloc(RMAP_LOG_SIZE, sizeof(unsigned int), GFP_KERNEL);
+		if (!log[i])
+			goto out;
+	}
+
+	mutex_lock(&kvm->slots_lock);
+	write_lock(&kvm->mmu_lock);
+
+	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
+		slots = __kvm_memslots(kvm, i);
+		for (j = 0; j < slots->used_slots; j++) {
+			slot = &slots->memslots[j];
+			for (k = 0; k < KVM_NR_PAGE_SIZES; k++) {
+				rmap = slot->arch.rmap[k];
+				lpage_size = kvm_mmu_slot_lpages(slot, k + 1);
+				cur = log[k];
+				for (l = 0; l < lpage_size; l++) {
+					index = ffs(pte_list_count(&rmap[l]));
+					if (WARN_ON_ONCE(index >= RMAP_LOG_SIZE))
+						index = RMAP_LOG_SIZE - 1;
+					cur[index]++;
+				}
+			}
+		}
+	}
+
+	write_unlock(&kvm->mmu_lock);
+	mutex_unlock(&kvm->slots_lock);
+
+	/* index=0 counts no rmap; index=1 counts 1 rmap */
+	seq_printf(m, "Rmap_Count:\t0\t1\t");
+	for (i = 2; i < RMAP_LOG_SIZE; i++) {
+		j = 1 << (i - 1);
+		k = (1 << i) - 1;
+		seq_printf(m, "%d-%d\t", j, k);
+	}
+	seq_printf(m, "\n");
+
+	for (i = 0; i < KVM_NR_PAGE_SIZES; i++) {
+		seq_printf(m, "Level=%s:\t", kvm_lpage_str[i]);
+		cur = log[i];
+		for (j = 0; j < RMAP_LOG_SIZE; j++)
+			seq_printf(m, "%d\t", cur[j]);
+		seq_printf(m, "\n");
+	}
+
+	ret = 0;
+out:
+	for (i = 0; i < KVM_NR_PAGE_SIZES; i++)
+		kfree(log[i]);
+
+	return ret;
+}
+
+static int kvm_mmu_rmaps_stat_open(struct inode *inode, struct file *file)
+{
+	struct kvm *kvm = inode->i_private;
+
+	if (!kvm_get_kvm_safe(kvm))
+		return -ENOENT;
+
+	return single_open(file, kvm_mmu_rmaps_stat_show, kvm);
+}
+
+static int kvm_mmu_rmaps_stat_release(struct inode *inode, struct file *file)
+{
+	struct kvm *kvm = inode->i_private;
+
+	kvm_put_kvm(kvm);
+
+	return single_release(inode, file);
+}
+
+static const struct file_operations mmu_rmaps_stat_fops = {
+	.open		= kvm_mmu_rmaps_stat_open,
+	.read		= seq_read,
+	.llseek		= seq_lseek,
+	.release	= kvm_mmu_rmaps_stat_release,
+};
+
+int kvm_arch_create_vm_debugfs(struct kvm *kvm)
+{
+	debugfs_create_file("mmu_rmaps_stat", 0644, kvm->debugfs_dentry, kvm,
+			    &mmu_rmaps_stat_fops);
+	return 0;
+}
diff --git a/arch/x86/kvm/hyperv.c b/arch/x86/kvm/hyperv.c
index 41d2a53c5dea..232a86a6faaf 100644
--- a/arch/x86/kvm/hyperv.c
+++ b/arch/x86/kvm/hyperv.c
@@ -88,6 +88,10 @@ static bool synic_has_vector_auto_eoi(struct kvm_vcpu_hv_synic *synic,
 static void synic_update_vector(struct kvm_vcpu_hv_synic *synic,
 				int vector)
 {
+	struct kvm_vcpu *vcpu = hv_synic_to_vcpu(synic);
+	struct kvm_hv *hv = to_kvm_hv(vcpu->kvm);
+	int auto_eoi_old, auto_eoi_new;
+
 	if (vector < HV_SYNIC_FIRST_VALID_VECTOR)
 		return;
 
@@ -96,10 +100,30 @@ static void synic_update_vector(struct kvm_vcpu_hv_synic *synic,
 	else
 		__clear_bit(vector, synic->vec_bitmap);
 
+	auto_eoi_old = bitmap_weight(synic->auto_eoi_bitmap, 256);
+
 	if (synic_has_vector_auto_eoi(synic, vector))
 		__set_bit(vector, synic->auto_eoi_bitmap);
 	else
 		__clear_bit(vector, synic->auto_eoi_bitmap);
+
+	auto_eoi_new = bitmap_weight(synic->auto_eoi_bitmap, 256);
+
+	if (!!auto_eoi_old == !!auto_eoi_new)
+		return;
+
+	mutex_lock(&vcpu->kvm->arch.apicv_update_lock);
+
+	if (auto_eoi_new)
+		hv->synic_auto_eoi_used++;
+	else
+		hv->synic_auto_eoi_used--;
+
+	__kvm_request_apicv_update(vcpu->kvm,
+				   !hv->synic_auto_eoi_used,
+				   APICV_INHIBIT_REASON_HYPERV);
+
+	mutex_unlock(&vcpu->kvm->arch.apicv_update_lock);
 }
 
 static int synic_set_sint(struct kvm_vcpu_hv_synic *synic, int sint,
@@ -933,12 +957,6 @@ int kvm_hv_activate_synic(struct kvm_vcpu *vcpu, bool dont_zero_synic_pages)
 
 	synic = to_hv_synic(vcpu);
 
-	/*
-	 * Hyper-V SynIC auto EOI SINT's are
-	 * not compatible with APICV, so request
-	 * to deactivate APICV permanently.
-	 */
-	kvm_request_apicv_update(vcpu->kvm, false, APICV_INHIBIT_REASON_HYPERV);
 	synic->active = true;
 	synic->dont_zero_synic_pages = dont_zero_synic_pages;
 	synic->control = HV_SYNIC_CONTROL_ENABLE;
@@ -2476,6 +2494,8 @@ int kvm_get_hv_cpuid(struct kvm_vcpu *vcpu, struct kvm_cpuid2 *cpuid,
 				ent->eax |= HV_X64_ENLIGHTENED_VMCS_RECOMMENDED;
 			if (!cpu_smt_possible())
 				ent->eax |= HV_X64_NO_NONARCH_CORESHARING;
+
+			ent->eax |= HV_DEPRECATING_AEOI_RECOMMENDED;
 			/*
 			 * Default number of spinlock retry attempts, matches
 			 * HyperV 2016.
diff --git a/arch/x86/kvm/i8254.c b/arch/x86/kvm/i8254.c
index a6e218c6140d..5a69cce4d72d 100644
--- a/arch/x86/kvm/i8254.c
+++ b/arch/x86/kvm/i8254.c
@@ -220,7 +220,8 @@ void __kvm_migrate_pit_timer(struct kvm_vcpu *vcpu)
 	struct kvm_pit *pit = vcpu->kvm->arch.vpit;
 	struct hrtimer *timer;
 
-	if (!kvm_vcpu_is_bsp(vcpu) || !pit)
+	/* Somewhat arbitrarily make vcpu0 the owner of the PIT. */
+	if (vcpu->vcpu_id || !pit)
 		return;
 
 	timer = &pit->pit_state.timer;
diff --git a/arch/x86/kvm/ioapic.h b/arch/x86/kvm/ioapic.h
index 11e4065e1617..bbd4a5d18b5d 100644
--- a/arch/x86/kvm/ioapic.h
+++ b/arch/x86/kvm/ioapic.h
@@ -35,11 +35,7 @@ struct kvm_vcpu;
 #define	IOAPIC_INIT			0x5
 #define	IOAPIC_EXTINT			0x7
 
-#ifdef CONFIG_X86
 #define RTC_GSI 8
-#else
-#define RTC_GSI -1U
-#endif
 
 struct dest_map {
 	/* vcpu bitmap where IRQ has been sent */
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index ba5a27879f1d..76fb00921203 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -192,6 +192,9 @@ void kvm_recalculate_apic_map(struct kvm *kvm)
 	if (atomic_read_acquire(&kvm->arch.apic_map_dirty) == CLEAN)
 		return;
 
+	WARN_ONCE(!irqchip_in_kernel(kvm),
+		  "Dirty APIC map without an in-kernel local APIC");
+
 	mutex_lock(&kvm->arch.apic_map_lock);
 	/*
 	 * Read kvm->arch.apic_map_dirty before kvm->arch.apic_map
@@ -2265,9 +2268,6 @@ void kvm_lapic_set_base(struct kvm_vcpu *vcpu, u64 value)
 	u64 old_value = vcpu->arch.apic_base;
 	struct kvm_lapic *apic = vcpu->arch.apic;
 
-	if (!apic)
-		value |= MSR_IA32_APICBASE_BSP;
-
 	vcpu->arch.apic_base = value;
 
 	if ((old_value ^ value) & MSR_IA32_APICBASE_ENABLE)
@@ -2323,6 +2323,13 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 	struct kvm_lapic *apic = vcpu->arch.apic;
 	int i;
 
+	if (!init_event) {
+		vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE |
+				       MSR_IA32_APICBASE_ENABLE;
+		if (kvm_vcpu_is_reset_bsp(vcpu))
+			vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
+	}
+
 	if (!apic)
 		return;
 
@@ -2330,8 +2337,8 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 	hrtimer_cancel(&apic->lapic_timer.timer);
 
 	if (!init_event) {
-		kvm_lapic_set_base(vcpu, APIC_DEFAULT_PHYS_BASE |
-		                         MSR_IA32_APICBASE_ENABLE);
+		apic->base_address = APIC_DEFAULT_PHYS_BASE;
+
 		kvm_apic_set_xapic_id(apic, vcpu->vcpu_id);
 	}
 	kvm_apic_set_version(apic->vcpu);
@@ -2364,9 +2371,7 @@ void kvm_lapic_reset(struct kvm_vcpu *vcpu, bool init_event)
 	apic->highest_isr_cache = -1;
 	update_divide_count(apic);
 	atomic_set(&apic->lapic_timer.pending, 0);
-	if (kvm_vcpu_is_bsp(vcpu))
-		kvm_lapic_set_base(vcpu,
-				vcpu->arch.apic_base | MSR_IA32_APICBASE_BSP);
+
 	vcpu->arch.pv_eoi.msr_val = 0;
 	apic_update_ppr(apic);
 	if (vcpu->arch.apicv_active) {
@@ -2476,11 +2481,6 @@ int kvm_create_lapic(struct kvm_vcpu *vcpu, int timer_advance_ns)
 		lapic_timer_advance_dynamic = false;
 	}
 
-	/*
-	 * APIC is created enabled. This will prevent kvm_lapic_set_base from
-	 * thinking that APIC state has changed.
-	 */
-	vcpu->arch.apic_base = MSR_IA32_APICBASE_ENABLE;
 	static_branch_inc(&apic_sw_disabled.key); /* sw disabled at reset */
 	kvm_iodevice_init(&apic->dev, &apic_mmio_ops);
 
diff --git a/arch/x86/kvm/mmu.h b/arch/x86/kvm/mmu.h
index 83e6c6965f1e..e9688a9f7b57 100644
--- a/arch/x86/kvm/mmu.h
+++ b/arch/x86/kvm/mmu.h
@@ -240,4 +240,29 @@ static inline bool kvm_memslots_have_rmaps(struct kvm *kvm)
 	return smp_load_acquire(&kvm->arch.memslots_have_rmaps);
 }
 
+static inline gfn_t gfn_to_index(gfn_t gfn, gfn_t base_gfn, int level)
+{
+	/* KVM_HPAGE_GFN_SHIFT(PG_LEVEL_4K) must be 0. */
+	return (gfn >> KVM_HPAGE_GFN_SHIFT(level)) -
+		(base_gfn >> KVM_HPAGE_GFN_SHIFT(level));
+}
+
+static inline unsigned long
+__kvm_mmu_slot_lpages(struct kvm_memory_slot *slot, unsigned long npages,
+		      int level)
+{
+	return gfn_to_index(slot->base_gfn + npages - 1,
+			    slot->base_gfn, level) + 1;
+}
+
+static inline unsigned long
+kvm_mmu_slot_lpages(struct kvm_memory_slot *slot, int level)
+{
+	return __kvm_mmu_slot_lpages(slot, slot->npages, level);
+}
+
+static inline void kvm_update_page_stats(struct kvm *kvm, int level, int count)
+{
+	atomic64_add(count, &kvm->stat.pages[level - 1]);
+}
 #endif
diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index 47b765270239..2d7e61122af8 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -97,6 +97,7 @@ module_param_named(flush_on_reuse, force_flush_and_sync_on_reuse, bool, 0644);
 bool tdp_enabled = false;
 
 static int max_huge_page_level __read_mostly;
+static int tdp_root_level __read_mostly;
 static int max_tdp_level __read_mostly;
 
 enum {
@@ -137,12 +138,22 @@ module_param(dbg, bool, 0644);
 
 #include <trace/events/kvm.h>
 
-/* make pte_list_desc fit well in cache line */
-#define PTE_LIST_EXT 3
+/* make pte_list_desc fit well in cache lines */
+#define PTE_LIST_EXT 14
 
+/*
+ * Slight optimization of cacheline layout, by putting `more' and `spte_count'
+ * at the start; then accessing it will only use one single cacheline for
+ * either full (entries==PTE_LIST_EXT) case or entries<=6.
+ */
 struct pte_list_desc {
-	u64 *sptes[PTE_LIST_EXT];
 	struct pte_list_desc *more;
+	/*
+	 * Stores number of entries stored in the pte_list_desc.  No need to be
+	 * u64 but just for easier alignment.  When PTE_LIST_EXT, means full.
+	 */
+	u64 spte_count;
+	u64 *sptes[PTE_LIST_EXT];
 };
 
 struct kvm_shadow_walk_iterator {
@@ -193,7 +204,7 @@ struct kvm_mmu_role_regs {
  * the single source of truth for the MMU's state.
  */
 #define BUILD_MMU_ROLE_REGS_ACCESSOR(reg, name, flag)			\
-static inline bool ____is_##reg##_##name(struct kvm_mmu_role_regs *regs)\
+static inline bool __maybe_unused ____is_##reg##_##name(struct kvm_mmu_role_regs *regs)\
 {									\
 	return !!(regs->reg & flag);					\
 }
@@ -215,7 +226,7 @@ BUILD_MMU_ROLE_REGS_ACCESSOR(efer, lma, EFER_LMA);
  * and the vCPU may be incorrect/irrelevant.
  */
 #define BUILD_MMU_ROLE_ACCESSOR(base_or_ext, reg, name)		\
-static inline bool is_##reg##_##name(struct kvm_mmu *mmu)	\
+static inline bool __maybe_unused is_##reg##_##name(struct kvm_mmu *mmu)	\
 {								\
 	return !!(mmu->mmu_role. base_or_ext . reg##_##name);	\
 }
@@ -323,12 +334,6 @@ static bool check_mmio_spte(struct kvm_vcpu *vcpu, u64 spte)
 static gpa_t translate_gpa(struct kvm_vcpu *vcpu, gpa_t gpa, u32 access,
                                   struct x86_exception *exception)
 {
-	/* Check if guest physical address doesn't exceed guest maximum */
-	if (kvm_vcpu_is_illegal_gpa(vcpu, gpa)) {
-		exception->error_code |= PFERR_RSVD_MASK;
-		return UNMAPPED_GVA;
-	}
-
         return gpa;
 }
 
@@ -592,12 +597,13 @@ static bool mmu_spte_update(u64 *sptep, u64 new_spte)
  * Rules for using mmu_spte_clear_track_bits:
  * It sets the sptep from present to nonpresent, and track the
  * state bits, it is used to clear the last level sptep.
- * Returns non-zero if the PTE was previously valid.
+ * Returns the old PTE.
  */
-static int mmu_spte_clear_track_bits(u64 *sptep)
+static int mmu_spte_clear_track_bits(struct kvm *kvm, u64 *sptep)
 {
 	kvm_pfn_t pfn;
 	u64 old_spte = *sptep;
+	int level = sptep_to_sp(sptep)->role.level;
 
 	if (!spte_has_volatile_bits(old_spte))
 		__update_clear_spte_fast(sptep, 0ull);
@@ -605,7 +611,9 @@ static int mmu_spte_clear_track_bits(u64 *sptep)
 		old_spte = __update_clear_spte_slow(sptep, 0ull);
 
 	if (!is_shadow_present_pte(old_spte))
-		return 0;
+		return old_spte;
+
+	kvm_update_page_stats(kvm, level, -1);
 
 	pfn = spte_to_pfn(old_spte);
 
@@ -622,7 +630,7 @@ static int mmu_spte_clear_track_bits(u64 *sptep)
 	if (is_dirty_spte(old_spte))
 		kvm_set_pfn_dirty(pfn);
 
-	return 1;
+	return old_spte;
 }
 
 /*
@@ -686,28 +694,36 @@ static bool mmu_spte_age(u64 *sptep)
 
 static void walk_shadow_page_lockless_begin(struct kvm_vcpu *vcpu)
 {
-	/*
-	 * Prevent page table teardown by making any free-er wait during
-	 * kvm_flush_remote_tlbs() IPI to all active vcpus.
-	 */
-	local_irq_disable();
+	if (is_tdp_mmu(vcpu->arch.mmu)) {
+		kvm_tdp_mmu_walk_lockless_begin();
+	} else {
+		/*
+		 * Prevent page table teardown by making any free-er wait during
+		 * kvm_flush_remote_tlbs() IPI to all active vcpus.
+		 */
+		local_irq_disable();
 
-	/*
-	 * Make sure a following spte read is not reordered ahead of the write
-	 * to vcpu->mode.
-	 */
-	smp_store_mb(vcpu->mode, READING_SHADOW_PAGE_TABLES);
+		/*
+		 * Make sure a following spte read is not reordered ahead of the write
+		 * to vcpu->mode.
+		 */
+		smp_store_mb(vcpu->mode, READING_SHADOW_PAGE_TABLES);
+	}
 }
 
 static void walk_shadow_page_lockless_end(struct kvm_vcpu *vcpu)
 {
-	/*
-	 * Make sure the write to vcpu->mode is not reordered in front of
-	 * reads to sptes.  If it does, kvm_mmu_commit_zap_page() can see us
-	 * OUTSIDE_GUEST_MODE and proceed to free the shadow page table.
-	 */
-	smp_store_release(&vcpu->mode, OUTSIDE_GUEST_MODE);
-	local_irq_enable();
+	if (is_tdp_mmu(vcpu->arch.mmu)) {
+		kvm_tdp_mmu_walk_lockless_end();
+	} else {
+		/*
+		 * Make sure the write to vcpu->mode is not reordered in front of
+		 * reads to sptes.  If it does, kvm_mmu_commit_zap_page() can see us
+		 * OUTSIDE_GUEST_MODE and proceed to free the shadow page table.
+		 */
+		smp_store_release(&vcpu->mode, OUTSIDE_GUEST_MODE);
+		local_irq_enable();
+	}
 }
 
 static int mmu_topup_memory_caches(struct kvm_vcpu *vcpu, bool maybe_indirect)
@@ -786,7 +802,7 @@ static struct kvm_lpage_info *lpage_info_slot(gfn_t gfn,
 	return &slot->arch.lpage_info[level - 2][idx];
 }
 
-static void update_gfn_disallow_lpage_count(struct kvm_memory_slot *slot,
+static void update_gfn_disallow_lpage_count(const struct kvm_memory_slot *slot,
 					    gfn_t gfn, int count)
 {
 	struct kvm_lpage_info *linfo;
@@ -799,12 +815,12 @@ static void update_gfn_disallow_lpage_count(struct kvm_memory_slot *slot,
 	}
 }
 
-void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
+void kvm_mmu_gfn_disallow_lpage(const struct kvm_memory_slot *slot, gfn_t gfn)
 {
 	update_gfn_disallow_lpage_count(slot, gfn, 1);
 }
 
-void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn)
+void kvm_mmu_gfn_allow_lpage(const struct kvm_memory_slot *slot, gfn_t gfn)
 {
 	update_gfn_disallow_lpage_count(slot, gfn, -1);
 }
@@ -893,7 +909,7 @@ static int pte_list_add(struct kvm_vcpu *vcpu, u64 *spte,
 			struct kvm_rmap_head *rmap_head)
 {
 	struct pte_list_desc *desc;
-	int i, count = 0;
+	int count = 0;
 
 	if (!rmap_head->val) {
 		rmap_printk("%p %llx 0->1\n", spte, *spte);
@@ -903,24 +919,24 @@ static int pte_list_add(struct kvm_vcpu *vcpu, u64 *spte,
 		desc = mmu_alloc_pte_list_desc(vcpu);
 		desc->sptes[0] = (u64 *)rmap_head->val;
 		desc->sptes[1] = spte;
+		desc->spte_count = 2;
 		rmap_head->val = (unsigned long)desc | 1;
 		++count;
 	} else {
 		rmap_printk("%p %llx many->many\n", spte, *spte);
 		desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
-		while (desc->sptes[PTE_LIST_EXT-1]) {
+		while (desc->spte_count == PTE_LIST_EXT) {
 			count += PTE_LIST_EXT;
-
 			if (!desc->more) {
 				desc->more = mmu_alloc_pte_list_desc(vcpu);
 				desc = desc->more;
+				desc->spte_count = 0;
 				break;
 			}
 			desc = desc->more;
 		}
-		for (i = 0; desc->sptes[i]; ++i)
-			++count;
-		desc->sptes[i] = spte;
+		count += desc->spte_count;
+		desc->sptes[desc->spte_count++] = spte;
 	}
 	return count;
 }
@@ -930,13 +946,12 @@ pte_list_desc_remove_entry(struct kvm_rmap_head *rmap_head,
 			   struct pte_list_desc *desc, int i,
 			   struct pte_list_desc *prev_desc)
 {
-	int j;
+	int j = desc->spte_count - 1;
 
-	for (j = PTE_LIST_EXT - 1; !desc->sptes[j] && j > i; --j)
-		;
 	desc->sptes[i] = desc->sptes[j];
 	desc->sptes[j] = NULL;
-	if (j != 0)
+	desc->spte_count--;
+	if (desc->spte_count)
 		return;
 	if (!prev_desc && !desc->more)
 		rmap_head->val = 0;
@@ -969,7 +984,7 @@ static void __pte_list_remove(u64 *spte, struct kvm_rmap_head *rmap_head)
 		desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
 		prev_desc = NULL;
 		while (desc) {
-			for (i = 0; i < PTE_LIST_EXT && desc->sptes[i]; ++i) {
+			for (i = 0; i < desc->spte_count; ++i) {
 				if (desc->sptes[i] == spte) {
 					pte_list_desc_remove_entry(rmap_head,
 							desc, i, prev_desc);
@@ -984,30 +999,68 @@ static void __pte_list_remove(u64 *spte, struct kvm_rmap_head *rmap_head)
 	}
 }
 
-static void pte_list_remove(struct kvm_rmap_head *rmap_head, u64 *sptep)
+static void pte_list_remove(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
+			    u64 *sptep)
 {
-	mmu_spte_clear_track_bits(sptep);
+	mmu_spte_clear_track_bits(kvm, sptep);
 	__pte_list_remove(sptep, rmap_head);
 }
 
-static struct kvm_rmap_head *__gfn_to_rmap(gfn_t gfn, int level,
-					   struct kvm_memory_slot *slot)
+/* Return true if rmap existed, false otherwise */
+static bool pte_list_destroy(struct kvm *kvm, struct kvm_rmap_head *rmap_head)
 {
-	unsigned long idx;
+	struct pte_list_desc *desc, *next;
+	int i;
 
-	idx = gfn_to_index(gfn, slot->base_gfn, level);
-	return &slot->arch.rmap[level - PG_LEVEL_4K][idx];
+	if (!rmap_head->val)
+		return false;
+
+	if (!(rmap_head->val & 1)) {
+		mmu_spte_clear_track_bits(kvm, (u64 *)rmap_head->val);
+		goto out;
+	}
+
+	desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
+
+	for (; desc; desc = next) {
+		for (i = 0; i < desc->spte_count; i++)
+			mmu_spte_clear_track_bits(kvm, desc->sptes[i]);
+		next = desc->more;
+		mmu_free_pte_list_desc(desc);
+	}
+out:
+	/* rmap_head is meaningless now, remember to reset it */
+	rmap_head->val = 0;
+	return true;
 }
 
-static struct kvm_rmap_head *gfn_to_rmap(struct kvm *kvm, gfn_t gfn,
-					 struct kvm_mmu_page *sp)
+unsigned int pte_list_count(struct kvm_rmap_head *rmap_head)
 {
-	struct kvm_memslots *slots;
-	struct kvm_memory_slot *slot;
+	struct pte_list_desc *desc;
+	unsigned int count = 0;
 
-	slots = kvm_memslots_for_spte_role(kvm, sp->role);
-	slot = __gfn_to_memslot(slots, gfn);
-	return __gfn_to_rmap(gfn, sp->role.level, slot);
+	if (!rmap_head->val)
+		return 0;
+	else if (!(rmap_head->val & 1))
+		return 1;
+
+	desc = (struct pte_list_desc *)(rmap_head->val & ~1ul);
+
+	while (desc) {
+		count += desc->spte_count;
+		desc = desc->more;
+	}
+
+	return count;
+}
+
+static struct kvm_rmap_head *gfn_to_rmap(gfn_t gfn, int level,
+					 const struct kvm_memory_slot *slot)
+{
+	unsigned long idx;
+
+	idx = gfn_to_index(gfn, slot->base_gfn, level);
+	return &slot->arch.rmap[level - PG_LEVEL_4K][idx];
 }
 
 static bool rmap_can_add(struct kvm_vcpu *vcpu)
@@ -1020,24 +1073,39 @@ static bool rmap_can_add(struct kvm_vcpu *vcpu)
 
 static int rmap_add(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	struct kvm_mmu_page *sp;
 	struct kvm_rmap_head *rmap_head;
 
 	sp = sptep_to_sp(spte);
 	kvm_mmu_page_set_gfn(sp, spte - sp->spt, gfn);
-	rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
+	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
+	rmap_head = gfn_to_rmap(gfn, sp->role.level, slot);
 	return pte_list_add(vcpu, spte, rmap_head);
 }
 
+
 static void rmap_remove(struct kvm *kvm, u64 *spte)
 {
+	struct kvm_memslots *slots;
+	struct kvm_memory_slot *slot;
 	struct kvm_mmu_page *sp;
 	gfn_t gfn;
 	struct kvm_rmap_head *rmap_head;
 
 	sp = sptep_to_sp(spte);
 	gfn = kvm_mmu_page_get_gfn(sp, spte - sp->spt);
-	rmap_head = gfn_to_rmap(kvm, gfn, sp);
+
+	/*
+	 * Unlike rmap_add and rmap_recycle, rmap_remove does not run in the
+	 * context of a vCPU so have to determine which memslots to use based
+	 * on context information in sp->role.
+	 */
+	slots = kvm_memslots_for_spte_role(kvm, sp->role);
+
+	slot = __gfn_to_memslot(slots, gfn);
+	rmap_head = gfn_to_rmap(gfn, sp->role.level, slot);
+
 	__pte_list_remove(spte, rmap_head);
 }
 
@@ -1119,7 +1187,9 @@ out:
 
 static void drop_spte(struct kvm *kvm, u64 *sptep)
 {
-	if (mmu_spte_clear_track_bits(sptep))
+	u64 old_spte = mmu_spte_clear_track_bits(kvm, sptep);
+
+	if (is_shadow_present_pte(old_spte))
 		rmap_remove(kvm, sptep);
 }
 
@@ -1129,7 +1199,6 @@ static bool __drop_large_spte(struct kvm *kvm, u64 *sptep)
 	if (is_large_pte(*sptep)) {
 		WARN_ON(sptep_to_sp(sptep)->role.level == PG_LEVEL_4K);
 		drop_spte(kvm, sptep);
-		--kvm->stat.lpages;
 		return true;
 	}
 
@@ -1218,7 +1287,7 @@ static bool spte_wrprot_for_clear_dirty(u64 *sptep)
  * Returns true iff any D or W bits were cleared.
  */
 static bool __rmap_clear_dirty(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
-			       struct kvm_memory_slot *slot)
+			       const struct kvm_memory_slot *slot)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -1256,8 +1325,8 @@ static void kvm_mmu_write_protect_pt_masked(struct kvm *kvm,
 		return;
 
 	while (mask) {
-		rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
-					  PG_LEVEL_4K, slot);
+		rmap_head = gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
+					PG_LEVEL_4K, slot);
 		__rmap_write_protect(kvm, rmap_head, false);
 
 		/* clear the first set bit */
@@ -1289,8 +1358,8 @@ static void kvm_mmu_clear_dirty_pt_masked(struct kvm *kvm,
 		return;
 
 	while (mask) {
-		rmap_head = __gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
-					  PG_LEVEL_4K, slot);
+		rmap_head = gfn_to_rmap(slot->base_gfn + gfn_offset + __ffs(mask),
+					PG_LEVEL_4K, slot);
 		__rmap_clear_dirty(kvm, rmap_head, slot);
 
 		/* clear the first set bit */
@@ -1356,7 +1425,7 @@ bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
 
 	if (kvm_memslots_have_rmaps(kvm)) {
 		for (i = min_level; i <= KVM_MAX_HUGEPAGE_LEVEL; ++i) {
-			rmap_head = __gfn_to_rmap(gfn, i, slot);
+			rmap_head = gfn_to_rmap(gfn, i, slot);
 			write_protected |= __rmap_write_protect(kvm, rmap_head, true);
 		}
 	}
@@ -1377,20 +1446,9 @@ static bool rmap_write_protect(struct kvm_vcpu *vcpu, u64 gfn)
 }
 
 static bool kvm_zap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
-			  struct kvm_memory_slot *slot)
+			  const struct kvm_memory_slot *slot)
 {
-	u64 *sptep;
-	struct rmap_iterator iter;
-	bool flush = false;
-
-	while ((sptep = rmap_get_first(rmap_head, &iter))) {
-		rmap_printk("spte %p %llx.\n", sptep, *sptep);
-
-		pte_list_remove(rmap_head, sptep);
-		flush = true;
-	}
-
-	return flush;
+	return pte_list_destroy(kvm, rmap_head);
 }
 
 static bool kvm_unmap_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
@@ -1421,13 +1479,13 @@ restart:
 		need_flush = 1;
 
 		if (pte_write(pte)) {
-			pte_list_remove(rmap_head, sptep);
+			pte_list_remove(kvm, rmap_head, sptep);
 			goto restart;
 		} else {
 			new_spte = kvm_mmu_changed_pte_notifier_make_spte(
 					*sptep, new_pfn);
 
-			mmu_spte_clear_track_bits(sptep);
+			mmu_spte_clear_track_bits(kvm, sptep);
 			mmu_spte_set(sptep, new_spte);
 		}
 	}
@@ -1442,7 +1500,7 @@ restart:
 
 struct slot_rmap_walk_iterator {
 	/* input fields. */
-	struct kvm_memory_slot *slot;
+	const struct kvm_memory_slot *slot;
 	gfn_t start_gfn;
 	gfn_t end_gfn;
 	int start_level;
@@ -1462,14 +1520,13 @@ rmap_walk_init_level(struct slot_rmap_walk_iterator *iterator, int level)
 {
 	iterator->level = level;
 	iterator->gfn = iterator->start_gfn;
-	iterator->rmap = __gfn_to_rmap(iterator->gfn, level, iterator->slot);
-	iterator->end_rmap = __gfn_to_rmap(iterator->end_gfn, level,
-					   iterator->slot);
+	iterator->rmap = gfn_to_rmap(iterator->gfn, level, iterator->slot);
+	iterator->end_rmap = gfn_to_rmap(iterator->end_gfn, level, iterator->slot);
 }
 
 static void
 slot_rmap_walk_init(struct slot_rmap_walk_iterator *iterator,
-		    struct kvm_memory_slot *slot, int start_level,
+		    const struct kvm_memory_slot *slot, int start_level,
 		    int end_level, gfn_t start_gfn, gfn_t end_gfn)
 {
 	iterator->slot = slot;
@@ -1584,12 +1641,13 @@ static bool kvm_test_age_rmapp(struct kvm *kvm, struct kvm_rmap_head *rmap_head,
 
 static void rmap_recycle(struct kvm_vcpu *vcpu, u64 *spte, gfn_t gfn)
 {
+	struct kvm_memory_slot *slot;
 	struct kvm_rmap_head *rmap_head;
 	struct kvm_mmu_page *sp;
 
 	sp = sptep_to_sp(spte);
-
-	rmap_head = gfn_to_rmap(vcpu->kvm, gfn, sp);
+	slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
+	rmap_head = gfn_to_rmap(gfn, sp->role.level, slot);
 
 	kvm_unmap_rmapp(vcpu->kvm, rmap_head, NULL, gfn, sp->role.level, __pte(0));
 	kvm_flush_remote_tlbs_with_address(vcpu->kvm, sp->gfn,
@@ -2232,8 +2290,6 @@ static int mmu_page_zap_pte(struct kvm *kvm, struct kvm_mmu_page *sp,
 	if (is_shadow_present_pte(pte)) {
 		if (is_last_spte(pte, sp->role.level)) {
 			drop_spte(kvm, spte);
-			if (is_large_pte(pte))
-				--kvm->stat.lpages;
 		} else {
 			child = to_shadow_page(pte & PT64_BASE_ADDR_MASK);
 			drop_parent_pte(child, spte);
@@ -2716,15 +2772,12 @@ static int mmu_set_spte(struct kvm_vcpu *vcpu, u64 *sptep,
 
 	pgprintk("%s: setting spte %llx\n", __func__, *sptep);
 	trace_kvm_mmu_set_spte(level, gfn, sptep);
-	if (!was_rmapped && is_large_pte(*sptep))
-		++vcpu->kvm->stat.lpages;
 
-	if (is_shadow_present_pte(*sptep)) {
-		if (!was_rmapped) {
-			rmap_count = rmap_add(vcpu, sptep, gfn);
-			if (rmap_count > RMAP_RECYCLE_THRESHOLD)
-				rmap_recycle(vcpu, sptep, gfn);
-		}
+	if (!was_rmapped) {
+		kvm_update_page_stats(vcpu->kvm, level, 1);
+		rmap_count = rmap_add(vcpu, sptep, gfn);
+		if (rmap_count > RMAP_RECYCLE_THRESHOLD)
+			rmap_recycle(vcpu, sptep, gfn);
 	}
 
 	return ret;
@@ -2852,6 +2905,7 @@ int kvm_mmu_max_mapping_level(struct kvm *kvm,
 			      kvm_pfn_t pfn, int max_level)
 {
 	struct kvm_lpage_info *linfo;
+	int host_level;
 
 	max_level = min(max_level, max_huge_page_level);
 	for ( ; max_level > PG_LEVEL_4K; max_level--) {
@@ -2863,7 +2917,8 @@ int kvm_mmu_max_mapping_level(struct kvm *kvm,
 	if (max_level == PG_LEVEL_4K)
 		return PG_LEVEL_4K;
 
-	return host_pfn_mapping_level(kvm, gfn, pfn, slot);
+	host_level = host_pfn_mapping_level(kvm, gfn, pfn, slot);
+	return min(host_level, max_level);
 }
 
 int kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, gfn_t gfn,
@@ -2887,17 +2942,12 @@ int kvm_mmu_hugepage_adjust(struct kvm_vcpu *vcpu, gfn_t gfn,
 	if (!slot)
 		return PG_LEVEL_4K;
 
-	level = kvm_mmu_max_mapping_level(vcpu->kvm, slot, gfn, pfn, max_level);
-	if (level == PG_LEVEL_4K)
-		return level;
-
-	*req_level = level = min(level, max_level);
-
 	/*
 	 * Enforce the iTLB multihit workaround after capturing the requested
 	 * level, which will be used to do precise, accurate accounting.
 	 */
-	if (huge_page_disallowed)
+	*req_level = level = kvm_mmu_max_mapping_level(vcpu->kvm, slot, gfn, pfn, max_level);
+	if (level == PG_LEVEL_4K || huge_page_disallowed)
 		return PG_LEVEL_4K;
 
 	/*
@@ -2965,15 +3015,16 @@ static int __direct_map(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
 			break;
 
 		drop_large_spte(vcpu, it.sptep);
-		if (!is_shadow_present_pte(*it.sptep)) {
-			sp = kvm_mmu_get_page(vcpu, base_gfn, it.addr,
-					      it.level - 1, true, ACC_ALL);
-
-			link_shadow_page(vcpu, it.sptep, sp);
-			if (is_tdp && huge_page_disallowed &&
-			    req_level >= it.level)
-				account_huge_nx_page(vcpu->kvm, sp);
-		}
+		if (is_shadow_present_pte(*it.sptep))
+			continue;
+
+		sp = kvm_mmu_get_page(vcpu, base_gfn, it.addr,
+				      it.level - 1, true, ACC_ALL);
+
+		link_shadow_page(vcpu, it.sptep, sp);
+		if (is_tdp && huge_page_disallowed &&
+		    req_level >= it.level)
+			account_huge_nx_page(vcpu->kvm, sp);
 	}
 
 	ret = mmu_set_spte(vcpu, it.sptep, ACC_ALL,
@@ -3122,15 +3173,40 @@ static bool is_access_allowed(u32 fault_err_code, u64 spte)
 }
 
 /*
- * Returns one of RET_PF_INVALID, RET_PF_FIXED or RET_PF_SPURIOUS.
+ * Returns the last level spte pointer of the shadow page walk for the given
+ * gpa, and sets *spte to the spte value. This spte may be non-preset. If no
+ * walk could be performed, returns NULL and *spte does not contain valid data.
+ *
+ * Contract:
+ *  - Must be called between walk_shadow_page_lockless_{begin,end}.
+ *  - The returned sptep must not be used after walk_shadow_page_lockless_end.
  */
-static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
-			   u32 error_code)
+static u64 *fast_pf_get_last_sptep(struct kvm_vcpu *vcpu, gpa_t gpa, u64 *spte)
 {
 	struct kvm_shadow_walk_iterator iterator;
+	u64 old_spte;
+	u64 *sptep = NULL;
+
+	for_each_shadow_entry_lockless(vcpu, gpa, iterator, old_spte) {
+		sptep = iterator.sptep;
+		*spte = old_spte;
+
+		if (!is_shadow_present_pte(old_spte))
+			break;
+	}
+
+	return sptep;
+}
+
+/*
+ * Returns one of RET_PF_INVALID, RET_PF_FIXED or RET_PF_SPURIOUS.
+ */
+static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code)
+{
 	struct kvm_mmu_page *sp;
 	int ret = RET_PF_INVALID;
 	u64 spte = 0ull;
+	u64 *sptep = NULL;
 	uint retry_count = 0;
 
 	if (!page_fault_can_be_fast(error_code))
@@ -3141,14 +3217,15 @@ static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 	do {
 		u64 new_spte;
 
-		for_each_shadow_entry_lockless(vcpu, cr2_or_gpa, iterator, spte)
-			if (!is_shadow_present_pte(spte))
-				break;
+		if (is_tdp_mmu(vcpu->arch.mmu))
+			sptep = kvm_tdp_mmu_fast_pf_get_last_sptep(vcpu, gpa, &spte);
+		else
+			sptep = fast_pf_get_last_sptep(vcpu, gpa, &spte);
 
 		if (!is_shadow_present_pte(spte))
 			break;
 
-		sp = sptep_to_sp(iterator.sptep);
+		sp = sptep_to_sp(sptep);
 		if (!is_last_spte(spte, sp->role.level))
 			break;
 
@@ -3206,8 +3283,7 @@ static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 		 * since the gfn is not stable for indirect shadow page. See
 		 * Documentation/virt/kvm/locking.rst to get more detail.
 		 */
-		if (fast_pf_fix_direct_spte(vcpu, sp, iterator.sptep, spte,
-					    new_spte)) {
+		if (fast_pf_fix_direct_spte(vcpu, sp, sptep, spte, new_spte)) {
 			ret = RET_PF_FIXED;
 			break;
 		}
@@ -3220,8 +3296,7 @@ static int fast_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 
 	} while (true);
 
-	trace_fast_page_fault(vcpu, cr2_or_gpa, error_code, iterator.sptep,
-			      spte, ret);
+	trace_fast_page_fault(vcpu, gpa, error_code, sptep, spte, ret);
 	walk_shadow_page_lockless_end(vcpu);
 
 	return ret;
@@ -3455,15 +3530,22 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 	 * the shadow page table may be a PAE or a long mode page table.
 	 */
 	pm_mask = PT_PRESENT_MASK | shadow_me_mask;
-	if (mmu->shadow_root_level == PT64_ROOT_4LEVEL) {
+	if (mmu->shadow_root_level >= PT64_ROOT_4LEVEL) {
 		pm_mask |= PT_ACCESSED_MASK | PT_WRITABLE_MASK | PT_USER_MASK;
 
 		if (WARN_ON_ONCE(!mmu->pml4_root)) {
 			r = -EIO;
 			goto out_unlock;
 		}
-
 		mmu->pml4_root[0] = __pa(mmu->pae_root) | pm_mask;
+
+		if (mmu->shadow_root_level == PT64_ROOT_5LEVEL) {
+			if (WARN_ON_ONCE(!mmu->pml5_root)) {
+				r = -EIO;
+				goto out_unlock;
+			}
+			mmu->pml5_root[0] = __pa(mmu->pml4_root) | pm_mask;
+		}
 	}
 
 	for (i = 0; i < 4; ++i) {
@@ -3482,7 +3564,9 @@ static int mmu_alloc_shadow_roots(struct kvm_vcpu *vcpu)
 		mmu->pae_root[i] = root | pm_mask;
 	}
 
-	if (mmu->shadow_root_level == PT64_ROOT_4LEVEL)
+	if (mmu->shadow_root_level == PT64_ROOT_5LEVEL)
+		mmu->root_hpa = __pa(mmu->pml5_root);
+	else if (mmu->shadow_root_level == PT64_ROOT_4LEVEL)
 		mmu->root_hpa = __pa(mmu->pml4_root);
 	else
 		mmu->root_hpa = __pa(mmu->pae_root);
@@ -3498,7 +3582,10 @@ out_unlock:
 static int mmu_alloc_special_roots(struct kvm_vcpu *vcpu)
 {
 	struct kvm_mmu *mmu = vcpu->arch.mmu;
-	u64 *pml4_root, *pae_root;
+	bool need_pml5 = mmu->shadow_root_level > PT64_ROOT_4LEVEL;
+	u64 *pml5_root = NULL;
+	u64 *pml4_root = NULL;
+	u64 *pae_root;
 
 	/*
 	 * When shadowing 32-bit or PAE NPT with 64-bit NPT, the PML4 and PDP
@@ -3511,20 +3598,21 @@ static int mmu_alloc_special_roots(struct kvm_vcpu *vcpu)
 		return 0;
 
 	/*
-	 * This mess only works with 4-level paging and needs to be updated to
-	 * work with 5-level paging.
+	 * NPT, the only paging mode that uses this horror, uses a fixed number
+	 * of levels for the shadow page tables, e.g. all MMUs are 4-level or
+	 * all MMus are 5-level.  Thus, this can safely require that pml5_root
+	 * is allocated if the other roots are valid and pml5 is needed, as any
+	 * prior MMU would also have required pml5.
 	 */
-	if (WARN_ON_ONCE(mmu->shadow_root_level != PT64_ROOT_4LEVEL))
-		return -EIO;
-
-	if (mmu->pae_root && mmu->pml4_root)
+	if (mmu->pae_root && mmu->pml4_root && (!need_pml5 || mmu->pml5_root))
 		return 0;
 
 	/*
 	 * The special roots should always be allocated in concert.  Yell and
 	 * bail if KVM ends up in a state where only one of the roots is valid.
 	 */
-	if (WARN_ON_ONCE(!tdp_enabled || mmu->pae_root || mmu->pml4_root))
+	if (WARN_ON_ONCE(!tdp_enabled || mmu->pae_root || mmu->pml4_root ||
+			 (need_pml5 && mmu->pml5_root)))
 		return -EIO;
 
 	/*
@@ -3535,16 +3623,31 @@ static int mmu_alloc_special_roots(struct kvm_vcpu *vcpu)
 	if (!pae_root)
 		return -ENOMEM;
 
+#ifdef CONFIG_X86_64
 	pml4_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
-	if (!pml4_root) {
-		free_page((unsigned long)pae_root);
-		return -ENOMEM;
+	if (!pml4_root)
+		goto err_pml4;
+
+	if (need_pml5) {
+		pml5_root = (void *)get_zeroed_page(GFP_KERNEL_ACCOUNT);
+		if (!pml5_root)
+			goto err_pml5;
 	}
+#endif
 
 	mmu->pae_root = pae_root;
 	mmu->pml4_root = pml4_root;
+	mmu->pml5_root = pml5_root;
 
 	return 0;
+
+#ifdef CONFIG_X86_64
+err_pml5:
+	free_page((unsigned long)pml4_root);
+err_pml4:
+	free_page((unsigned long)pae_root);
+	return -ENOMEM;
+#endif
 }
 
 void kvm_mmu_sync_roots(struct kvm_vcpu *vcpu)
@@ -3640,6 +3743,8 @@ static bool mmio_info_in_cache(struct kvm_vcpu *vcpu, u64 addr, bool direct)
 /*
  * Return the level of the lowest level SPTE added to sptes.
  * That SPTE may be non-present.
+ *
+ * Must be called between walk_shadow_page_lockless_{begin,end}.
  */
 static int get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes, int *root_level)
 {
@@ -3647,8 +3752,6 @@ static int get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes, int *root_level
 	int leaf = -1;
 	u64 spte;
 
-	walk_shadow_page_lockless_begin(vcpu);
-
 	for (shadow_walk_init(&iterator, vcpu, addr),
 	     *root_level = iterator.level;
 	     shadow_walk_okay(&iterator);
@@ -3662,8 +3765,6 @@ static int get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes, int *root_level
 			break;
 	}
 
-	walk_shadow_page_lockless_end(vcpu);
-
 	return leaf;
 }
 
@@ -3675,11 +3776,15 @@ static bool get_mmio_spte(struct kvm_vcpu *vcpu, u64 addr, u64 *sptep)
 	int root, leaf, level;
 	bool reserved = false;
 
+	walk_shadow_page_lockless_begin(vcpu);
+
 	if (is_tdp_mmu(vcpu->arch.mmu))
 		leaf = kvm_tdp_mmu_get_walk(vcpu, addr, sptes, &root);
 	else
 		leaf = get_walk(vcpu, addr, sptes, &root);
 
+	walk_shadow_page_lockless_end(vcpu);
+
 	if (unlikely(leaf < 0)) {
 		*sptep = 0ull;
 		return reserved;
@@ -3795,9 +3900,9 @@ static bool kvm_arch_setup_async_pf(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa,
 				  kvm_vcpu_gfn_to_hva(vcpu, gfn), &arch);
 }
 
-static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
+static bool kvm_faultin_pfn(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 			 gpa_t cr2_or_gpa, kvm_pfn_t *pfn, hva_t *hva,
-			 bool write, bool *writable)
+			 bool write, bool *writable, int *r)
 {
 	struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, gfn);
 	bool async;
@@ -3808,13 +3913,26 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 	 * be zapped before KVM inserts a new MMIO SPTE for the gfn.
 	 */
 	if (slot && (slot->flags & KVM_MEMSLOT_INVALID))
-		return true;
-
-	/* Don't expose private memslots to L2. */
-	if (is_guest_mode(vcpu) && !kvm_is_visible_memslot(slot)) {
-		*pfn = KVM_PFN_NOSLOT;
-		*writable = false;
-		return false;
+		goto out_retry;
+
+	if (!kvm_is_visible_memslot(slot)) {
+		/* Don't expose private memslots to L2. */
+		if (is_guest_mode(vcpu)) {
+			*pfn = KVM_PFN_NOSLOT;
+			*writable = false;
+			return false;
+		}
+		/*
+		 * If the APIC access page exists but is disabled, go directly
+		 * to emulation without caching the MMIO access or creating a
+		 * MMIO SPTE.  That way the cache doesn't need to be purged
+		 * when the AVIC is re-enabled.
+		 */
+		if (slot && slot->id == APIC_ACCESS_PAGE_PRIVATE_MEMSLOT &&
+		    !kvm_apicv_activated(vcpu->kvm)) {
+			*r = RET_PF_EMULATE;
+			return true;
+		}
 	}
 
 	async = false;
@@ -3828,14 +3946,17 @@ static bool try_async_pf(struct kvm_vcpu *vcpu, bool prefault, gfn_t gfn,
 		if (kvm_find_async_pf_gfn(vcpu, gfn)) {
 			trace_kvm_async_pf_doublefault(cr2_or_gpa, gfn);
 			kvm_make_request(KVM_REQ_APF_HALT, vcpu);
-			return true;
+			goto out_retry;
 		} else if (kvm_arch_setup_async_pf(vcpu, cr2_or_gpa, gfn))
-			return true;
+			goto out_retry;
 	}
 
 	*pfn = __gfn_to_pfn_memslot(slot, gfn, false, NULL,
 				    write, writable, hva);
-	return false;
+
+out_retry:
+	*r = RET_PF_RETRY;
+	return true;
 }
 
 static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
@@ -3854,11 +3975,9 @@ static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
 	if (page_fault_handle_page_track(vcpu, error_code, gfn))
 		return RET_PF_EMULATE;
 
-	if (!is_tdp_mmu_fault) {
-		r = fast_page_fault(vcpu, gpa, error_code);
-		if (r != RET_PF_INVALID)
-			return r;
-	}
+	r = fast_page_fault(vcpu, gpa, error_code);
+	if (r != RET_PF_INVALID)
+		return r;
 
 	r = mmu_topup_memory_caches(vcpu, false);
 	if (r)
@@ -3867,9 +3986,9 @@ static int direct_page_fault(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 
-	if (try_async_pf(vcpu, prefault, gfn, gpa, &pfn, &hva,
-			 write, &map_writable))
-		return RET_PF_RETRY;
+	if (kvm_faultin_pfn(vcpu, prefault, gfn, gpa, &pfn, &hva,
+			 write, &map_writable, &r))
+		return r;
 
 	if (handle_abnormal_pfn(vcpu, is_tdp ? 0 : gpa, gfn, pfn, ACC_ALL, &r))
 		return r;
@@ -4588,6 +4707,10 @@ static union kvm_mmu_role kvm_calc_mmu_role_common(struct kvm_vcpu *vcpu,
 
 static inline int kvm_mmu_get_tdp_level(struct kvm_vcpu *vcpu)
 {
+	/* tdp_root_level is architecture forced level, use it if nonzero */
+	if (tdp_root_level)
+		return tdp_root_level;
+
 	/* Use 5-level TDP if and only if it's useful/necessary. */
 	if (max_tdp_level == 5 && cpuid_maxphyaddr(vcpu) <= 48)
 		return 4;
@@ -5160,7 +5283,7 @@ int kvm_mmu_page_fault(struct kvm_vcpu *vcpu, gpa_t cr2_or_gpa, u64 error_code,
 	if (r == RET_PF_INVALID) {
 		r = kvm_mmu_do_page_fault(vcpu, cr2_or_gpa,
 					  lower_32_bits(error_code), false);
-		if (WARN_ON_ONCE(r == RET_PF_INVALID))
+		if (KVM_BUG_ON(r == RET_PF_INVALID, vcpu->kvm))
 			return -EIO;
 	}
 
@@ -5279,10 +5402,11 @@ void kvm_mmu_invpcid_gva(struct kvm_vcpu *vcpu, gva_t gva, unsigned long pcid)
 	 */
 }
 
-void kvm_configure_mmu(bool enable_tdp, int tdp_max_root_level,
-		       int tdp_huge_page_level)
+void kvm_configure_mmu(bool enable_tdp, int tdp_forced_root_level,
+		       int tdp_max_root_level, int tdp_huge_page_level)
 {
 	tdp_enabled = enable_tdp;
+	tdp_root_level = tdp_forced_root_level;
 	max_tdp_level = tdp_max_root_level;
 
 	/*
@@ -5302,12 +5426,13 @@ void kvm_configure_mmu(bool enable_tdp, int tdp_max_root_level,
 EXPORT_SYMBOL_GPL(kvm_configure_mmu);
 
 /* The return value indicates if tlb flush on all vcpus is needed. */
-typedef bool (*slot_level_handler) (struct kvm *kvm, struct kvm_rmap_head *rmap_head,
-				    struct kvm_memory_slot *slot);
+typedef bool (*slot_level_handler) (struct kvm *kvm,
+				    struct kvm_rmap_head *rmap_head,
+				    const struct kvm_memory_slot *slot);
 
 /* The caller should hold mmu-lock before calling this function. */
 static __always_inline bool
-slot_handle_level_range(struct kvm *kvm, struct kvm_memory_slot *memslot,
+slot_handle_level_range(struct kvm *kvm, const struct kvm_memory_slot *memslot,
 			slot_level_handler fn, int start_level, int end_level,
 			gfn_t start_gfn, gfn_t end_gfn, bool flush_on_yield,
 			bool flush)
@@ -5334,7 +5459,7 @@ slot_handle_level_range(struct kvm *kvm, struct kvm_memory_slot *memslot,
 }
 
 static __always_inline bool
-slot_handle_level(struct kvm *kvm, struct kvm_memory_slot *memslot,
+slot_handle_level(struct kvm *kvm, const struct kvm_memory_slot *memslot,
 		  slot_level_handler fn, int start_level, int end_level,
 		  bool flush_on_yield)
 {
@@ -5345,7 +5470,7 @@ slot_handle_level(struct kvm *kvm, struct kvm_memory_slot *memslot,
 }
 
 static __always_inline bool
-slot_handle_leaf(struct kvm *kvm, struct kvm_memory_slot *memslot,
+slot_handle_leaf(struct kvm *kvm, const struct kvm_memory_slot *memslot,
 		 slot_level_handler fn, bool flush_on_yield)
 {
 	return slot_handle_level(kvm, memslot, fn, PG_LEVEL_4K,
@@ -5358,6 +5483,7 @@ static void free_mmu_pages(struct kvm_mmu *mmu)
 		set_memory_encrypted((unsigned long)mmu->pae_root, 1);
 	free_page((unsigned long)mmu->pae_root);
 	free_page((unsigned long)mmu->pml4_root);
+	free_page((unsigned long)mmu->pml5_root);
 }
 
 static int __kvm_mmu_create(struct kvm_vcpu *vcpu, struct kvm_mmu *mmu)
@@ -5587,6 +5713,10 @@ void kvm_mmu_uninit_vm(struct kvm *kvm)
 	kvm_mmu_uninit_tdp_mmu(kvm);
 }
 
+/*
+ * Invalidate (zap) SPTEs that cover GFNs from gfn_start and up to gfn_end
+ * (not including it)
+ */
 void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 {
 	struct kvm_memslots *slots;
@@ -5594,8 +5724,11 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 	int i;
 	bool flush = false;
 
+	write_lock(&kvm->mmu_lock);
+
+	kvm_inc_notifier_count(kvm, gfn_start, gfn_end);
+
 	if (kvm_memslots_have_rmaps(kvm)) {
-		write_lock(&kvm->mmu_lock);
 		for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
 			slots = __kvm_memslots(kvm, i);
 			kvm_for_each_memslot(memslot, slots) {
@@ -5606,41 +5739,44 @@ void kvm_zap_gfn_range(struct kvm *kvm, gfn_t gfn_start, gfn_t gfn_end)
 				if (start >= end)
 					continue;
 
-				flush = slot_handle_level_range(kvm, memslot,
+				flush = slot_handle_level_range(kvm,
+						(const struct kvm_memory_slot *) memslot,
 						kvm_zap_rmapp, PG_LEVEL_4K,
 						KVM_MAX_HUGEPAGE_LEVEL, start,
 						end - 1, true, flush);
 			}
 		}
 		if (flush)
-			kvm_flush_remote_tlbs_with_address(kvm, gfn_start, gfn_end);
-		write_unlock(&kvm->mmu_lock);
+			kvm_flush_remote_tlbs_with_address(kvm, gfn_start,
+							   gfn_end - gfn_start);
 	}
 
 	if (is_tdp_mmu_enabled(kvm)) {
-		flush = false;
-
-		read_lock(&kvm->mmu_lock);
 		for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++)
 			flush = kvm_tdp_mmu_zap_gfn_range(kvm, i, gfn_start,
-							  gfn_end, flush, true);
+							  gfn_end, flush);
 		if (flush)
 			kvm_flush_remote_tlbs_with_address(kvm, gfn_start,
-							   gfn_end);
-
-		read_unlock(&kvm->mmu_lock);
+							   gfn_end - gfn_start);
 	}
+
+	if (flush)
+		kvm_flush_remote_tlbs_with_address(kvm, gfn_start, gfn_end);
+
+	kvm_dec_notifier_count(kvm, gfn_start, gfn_end);
+
+	write_unlock(&kvm->mmu_lock);
 }
 
 static bool slot_rmap_write_protect(struct kvm *kvm,
 				    struct kvm_rmap_head *rmap_head,
-				    struct kvm_memory_slot *slot)
+				    const struct kvm_memory_slot *slot)
 {
 	return __rmap_write_protect(kvm, rmap_head, false);
 }
 
 void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
-				      struct kvm_memory_slot *memslot,
+				      const struct kvm_memory_slot *memslot,
 				      int start_level)
 {
 	bool flush = false;
@@ -5676,7 +5812,7 @@ void kvm_mmu_slot_remove_write_access(struct kvm *kvm,
 
 static bool kvm_mmu_zap_collapsible_spte(struct kvm *kvm,
 					 struct kvm_rmap_head *rmap_head,
-					 struct kvm_memory_slot *slot)
+					 const struct kvm_memory_slot *slot)
 {
 	u64 *sptep;
 	struct rmap_iterator iter;
@@ -5699,7 +5835,7 @@ restart:
 		if (sp->role.direct && !kvm_is_reserved_pfn(pfn) &&
 		    sp->role.level < kvm_mmu_max_mapping_level(kvm, slot, sp->gfn,
 							       pfn, PG_LEVEL_NUM)) {
-			pte_list_remove(rmap_head, sptep);
+			pte_list_remove(kvm, rmap_head, sptep);
 
 			if (kvm_available_flush_tlb_with_range())
 				kvm_flush_remote_tlbs_with_address(kvm, sp->gfn,
@@ -5715,10 +5851,8 @@ restart:
 }
 
 void kvm_mmu_zap_collapsible_sptes(struct kvm *kvm,
-				   const struct kvm_memory_slot *memslot)
+				   const struct kvm_memory_slot *slot)
 {
-	/* FIXME: const-ify all uses of struct kvm_memory_slot.  */
-	struct kvm_memory_slot *slot = (struct kvm_memory_slot *)memslot;
 	bool flush = false;
 
 	if (kvm_memslots_have_rmaps(kvm)) {
@@ -5754,7 +5888,7 @@ void kvm_arch_flush_remote_tlbs_memslot(struct kvm *kvm,
 }
 
 void kvm_mmu_slot_leaf_clear_dirty(struct kvm *kvm,
-				   struct kvm_memory_slot *memslot)
+				   const struct kvm_memory_slot *memslot)
 {
 	bool flush = false;
 
diff --git a/arch/x86/kvm/mmu/mmu_audit.c b/arch/x86/kvm/mmu/mmu_audit.c
index cedc17b2f60e..9e7dcf999f08 100644
--- a/arch/x86/kvm/mmu/mmu_audit.c
+++ b/arch/x86/kvm/mmu/mmu_audit.c
@@ -147,7 +147,7 @@ static void inspect_spte_has_rmap(struct kvm *kvm, u64 *sptep)
 		return;
 	}
 
-	rmap_head = __gfn_to_rmap(gfn, rev_sp->role.level, slot);
+	rmap_head = gfn_to_rmap(gfn, rev_sp->role.level, slot);
 	if (!rmap_head->val) {
 		if (!__ratelimit(&ratelimit_state))
 			return;
@@ -200,7 +200,7 @@ static void audit_write_protection(struct kvm *kvm, struct kvm_mmu_page *sp)
 
 	slots = kvm_memslots_for_spte_role(kvm, sp->role);
 	slot = __gfn_to_memslot(slots, sp->gfn);
-	rmap_head = __gfn_to_rmap(sp->gfn, PG_LEVEL_4K, slot);
+	rmap_head = gfn_to_rmap(sp->gfn, PG_LEVEL_4K, slot);
 
 	for_each_rmap_spte(rmap_head, &iter, sptep) {
 		if (is_writable_pte(*sptep))
diff --git a/arch/x86/kvm/mmu/mmu_internal.h b/arch/x86/kvm/mmu/mmu_internal.h
index 35567293c1fd..bf2bdbf333c2 100644
--- a/arch/x86/kvm/mmu/mmu_internal.h
+++ b/arch/x86/kvm/mmu/mmu_internal.h
@@ -31,13 +31,16 @@ extern bool dbg;
 #define IS_VALID_PAE_ROOT(x)	(!!(x))
 
 struct kvm_mmu_page {
+	/*
+	 * Note, "link" through "spt" fit in a single 64 byte cache line on
+	 * 64-bit kernels, keep it that way unless there's a reason not to.
+	 */
 	struct list_head link;
 	struct hlist_node hash_link;
-	struct list_head lpage_disallowed_link;
 
+	bool tdp_mmu_page;
 	bool unsync;
 	u8 mmu_valid_gen;
-	bool mmio_cached;
 	bool lpage_disallowed; /* Can't be replaced by an equiv large page */
 
 	/*
@@ -59,6 +62,7 @@ struct kvm_mmu_page {
 	struct kvm_rmap_head parent_ptes; /* rmap pointers to parent sptes */
 	DECLARE_BITMAP(unsync_child_bitmap, 512);
 
+	struct list_head lpage_disallowed_link;
 #ifdef CONFIG_X86_32
 	/*
 	 * Used out of the mmu-lock to avoid reading spte values while an
@@ -71,8 +75,6 @@ struct kvm_mmu_page {
 	atomic_t write_flooding_count;
 
 #ifdef CONFIG_X86_64
-	bool tdp_mmu_page;
-
 	/* Used for freeing the page asynchronously if it is a TDP MMU page. */
 	struct rcu_head rcu_head;
 #endif
@@ -124,13 +126,14 @@ static inline bool is_nx_huge_page_enabled(void)
 
 int mmu_try_to_unsync_pages(struct kvm_vcpu *vcpu, gfn_t gfn, bool can_unsync);
 
-void kvm_mmu_gfn_disallow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
-void kvm_mmu_gfn_allow_lpage(struct kvm_memory_slot *slot, gfn_t gfn);
+void kvm_mmu_gfn_disallow_lpage(const struct kvm_memory_slot *slot, gfn_t gfn);
+void kvm_mmu_gfn_allow_lpage(const struct kvm_memory_slot *slot, gfn_t gfn);
 bool kvm_mmu_slot_gfn_write_protect(struct kvm *kvm,
 				    struct kvm_memory_slot *slot, u64 gfn,
 				    int min_level);
 void kvm_flush_remote_tlbs_with_address(struct kvm *kvm,
 					u64 start_gfn, u64 pages);
+unsigned int pte_list_count(struct kvm_rmap_head *rmap_head);
 
 /*
  * Return values of handle_mmio_page_fault, mmu.page_fault, and fast_page_fault().
@@ -140,6 +143,9 @@ void kvm_flush_remote_tlbs_with_address(struct kvm *kvm,
  * RET_PF_INVALID: the spte is invalid, let the real page fault path update it.
  * RET_PF_FIXED: The faulting entry has been fixed.
  * RET_PF_SPURIOUS: The faulting entry was already fixed, e.g. by another vCPU.
+ *
+ * Any names added to this enum should be exported to userspace for use in
+ * tracepoints via TRACE_DEFINE_ENUM() in mmutrace.h
  */
 enum {
 	RET_PF_RETRY = 0,
diff --git a/arch/x86/kvm/mmu/mmutrace.h b/arch/x86/kvm/mmu/mmutrace.h
index efbad33a0645..2924a4081a19 100644
--- a/arch/x86/kvm/mmu/mmutrace.h
+++ b/arch/x86/kvm/mmu/mmutrace.h
@@ -54,6 +54,12 @@
 	{ PFERR_RSVD_MASK, "RSVD" },	\
 	{ PFERR_FETCH_MASK, "F" }
 
+TRACE_DEFINE_ENUM(RET_PF_RETRY);
+TRACE_DEFINE_ENUM(RET_PF_EMULATE);
+TRACE_DEFINE_ENUM(RET_PF_INVALID);
+TRACE_DEFINE_ENUM(RET_PF_FIXED);
+TRACE_DEFINE_ENUM(RET_PF_SPURIOUS);
+
 /*
  * A pagetable walk has started
  */
diff --git a/arch/x86/kvm/mmu/page_track.c b/arch/x86/kvm/mmu/page_track.c
index 91a9f7e0fd91..269f11f92fd0 100644
--- a/arch/x86/kvm/mmu/page_track.c
+++ b/arch/x86/kvm/mmu/page_track.c
@@ -16,6 +16,7 @@
 
 #include <asm/kvm_page_track.h>
 
+#include "mmu.h"
 #include "mmu_internal.h"
 
 void kvm_page_track_free_memslot(struct kvm_memory_slot *slot)
diff --git a/arch/x86/kvm/mmu/paging_tmpl.h b/arch/x86/kvm/mmu/paging_tmpl.h
index ee044d357b5f..7d03e9b7ccfa 100644
--- a/arch/x86/kvm/mmu/paging_tmpl.h
+++ b/arch/x86/kvm/mmu/paging_tmpl.h
@@ -881,9 +881,9 @@ static int FNAME(page_fault)(struct kvm_vcpu *vcpu, gpa_t addr, u32 error_code,
 	mmu_seq = vcpu->kvm->mmu_notifier_seq;
 	smp_rmb();
 
-	if (try_async_pf(vcpu, prefault, walker.gfn, addr, &pfn, &hva,
-			 write_fault, &map_writable))
-		return RET_PF_RETRY;
+	if (kvm_faultin_pfn(vcpu, prefault, walker.gfn, addr, &pfn, &hva,
+			 write_fault, &map_writable, &r))
+		return r;
 
 	if (handle_abnormal_pfn(vcpu, addr, walker.gfn, pfn, walker.pte_access, &r))
 		return r;
diff --git a/arch/x86/kvm/mmu/tdp_mmu.c b/arch/x86/kvm/mmu/tdp_mmu.c
index d80cb122b5f3..64ccfc1fa553 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.c
+++ b/arch/x86/kvm/mmu/tdp_mmu.c
@@ -10,7 +10,7 @@
 #include <asm/cmpxchg.h>
 #include <trace/events/kvm.h>
 
-static bool __read_mostly tdp_mmu_enabled = false;
+static bool __read_mostly tdp_mmu_enabled = true;
 module_param_named(tdp_mmu, tdp_mmu_enabled, bool, 0644);
 
 /* Initializes the TDP MMU for the VM, if enabled. */
@@ -255,26 +255,17 @@ static void handle_changed_spte_dirty_log(struct kvm *kvm, int as_id, gfn_t gfn,
  *
  * @kvm: kvm instance
  * @sp: the new page
- * @shared: This operation may not be running under the exclusive use of
- *	    the MMU lock and the operation must synchronize with other
- *	    threads that might be adding or removing pages.
  * @account_nx: This page replaces a NX large page and should be marked for
  *		eventual reclaim.
  */
 static void tdp_mmu_link_page(struct kvm *kvm, struct kvm_mmu_page *sp,
-			      bool shared, bool account_nx)
+			      bool account_nx)
 {
-	if (shared)
-		spin_lock(&kvm->arch.tdp_mmu_pages_lock);
-	else
-		lockdep_assert_held_write(&kvm->mmu_lock);
-
+	spin_lock(&kvm->arch.tdp_mmu_pages_lock);
 	list_add(&sp->link, &kvm->arch.tdp_mmu_pages);
 	if (account_nx)
 		account_huge_nx_page(kvm, sp);
-
-	if (shared)
-		spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
+	spin_unlock(&kvm->arch.tdp_mmu_pages_lock);
 }
 
 /**
@@ -445,13 +436,6 @@ static void __handle_changed_spte(struct kvm *kvm, int as_id, gfn_t gfn,
 
 	trace_kvm_tdp_mmu_spte_changed(as_id, gfn, level, old_spte, new_spte);
 
-	if (is_large_pte(old_spte) != is_large_pte(new_spte)) {
-		if (is_large_pte(old_spte))
-			atomic64_sub(1, (atomic64_t*)&kvm->stat.lpages);
-		else
-			atomic64_add(1, (atomic64_t*)&kvm->stat.lpages);
-	}
-
 	/*
 	 * The only times a SPTE should be changed from a non-present to
 	 * non-present state is when an MMIO entry is installed/modified/
@@ -477,6 +461,8 @@ static void __handle_changed_spte(struct kvm *kvm, int as_id, gfn_t gfn,
 		return;
 	}
 
+	if (is_leaf != was_leaf)
+		kvm_update_page_stats(kvm, level, is_leaf ? 1 : -1);
 
 	if (was_leaf && is_dirty_spte(old_spte) &&
 	    (!is_present || !is_dirty_spte(new_spte) || pfn_changed))
@@ -526,6 +512,10 @@ static inline bool tdp_mmu_set_spte_atomic_no_dirty_log(struct kvm *kvm,
 	if (is_removed_spte(iter->old_spte))
 		return false;
 
+	/*
+	 * Note, fast_pf_fix_direct_spte() can also modify TDP MMU SPTEs and
+	 * does not hold the mmu_lock.
+	 */
 	if (cmpxchg64(rcu_dereference(iter->sptep), iter->old_spte,
 		      new_spte) != iter->old_spte)
 		return false;
@@ -537,15 +527,40 @@ static inline bool tdp_mmu_set_spte_atomic_no_dirty_log(struct kvm *kvm,
 	return true;
 }
 
-static inline bool tdp_mmu_set_spte_atomic(struct kvm *kvm,
-					   struct tdp_iter *iter,
-					   u64 new_spte)
+/*
+ * tdp_mmu_map_set_spte_atomic - Set a leaf TDP MMU SPTE atomically to resolve a
+ * TDP page fault.
+ *
+ * @vcpu: The vcpu instance that took the TDP page fault.
+ * @iter: a tdp_iter instance currently on the SPTE that should be set
+ * @new_spte: The value the SPTE should be set to
+ *
+ * Returns: true if the SPTE was set, false if it was not. If false is returned,
+ *	    this function will have no side-effects.
+ */
+static inline bool tdp_mmu_map_set_spte_atomic(struct kvm_vcpu *vcpu,
+					       struct tdp_iter *iter,
+					       u64 new_spte)
 {
+	struct kvm *kvm = vcpu->kvm;
+
 	if (!tdp_mmu_set_spte_atomic_no_dirty_log(kvm, iter, new_spte))
 		return false;
 
-	handle_changed_spte_dirty_log(kvm, iter->as_id, iter->gfn,
-				      iter->old_spte, new_spte, iter->level);
+	/*
+	 * Use kvm_vcpu_gfn_to_memslot() instead of going through
+	 * handle_changed_spte_dirty_log() to leverage vcpu->last_used_slot.
+	 */
+	if (is_writable_pte(new_spte)) {
+		struct kvm_memory_slot *slot = kvm_vcpu_gfn_to_memslot(vcpu, iter->gfn);
+
+		if (slot && kvm_slot_dirty_track_enabled(slot)) {
+			/* Enforced by kvm_mmu_hugepage_adjust. */
+			WARN_ON_ONCE(iter->level > PG_LEVEL_4K);
+			mark_page_dirty_in_slot(kvm, slot, iter->gfn);
+		}
+	}
+
 	return true;
 }
 
@@ -558,7 +573,7 @@ static inline bool tdp_mmu_zap_spte_atomic(struct kvm *kvm,
 	 * immediately installing a present entry in its place
 	 * before the TLBs are flushed.
 	 */
-	if (!tdp_mmu_set_spte_atomic(kvm, iter, REMOVED_SPTE))
+	if (!tdp_mmu_set_spte_atomic_no_dirty_log(kvm, iter, REMOVED_SPTE))
 		return false;
 
 	kvm_flush_remote_tlbs_with_address(kvm, iter->gfn,
@@ -789,21 +804,15 @@ retry:
  * non-root pages mapping GFNs strictly within that range. Returns true if
  * SPTEs have been cleared and a TLB flush is needed before releasing the
  * MMU lock.
- *
- * If shared is true, this thread holds the MMU lock in read mode and must
- * account for the possibility that other threads are modifying the paging
- * structures concurrently. If shared is false, this thread should hold the
- * MMU in write mode.
  */
 bool __kvm_tdp_mmu_zap_gfn_range(struct kvm *kvm, int as_id, gfn_t start,
-				 gfn_t end, bool can_yield, bool flush,
-				 bool shared)
+				 gfn_t end, bool can_yield, bool flush)
 {
 	struct kvm_mmu_page *root;
 
-	for_each_tdp_mmu_root_yield_safe(kvm, root, as_id, shared)
+	for_each_tdp_mmu_root_yield_safe(kvm, root, as_id, false)
 		flush = zap_gfn_range(kvm, root, start, end, can_yield, flush,
-				      shared);
+				      false);
 
 	return flush;
 }
@@ -814,8 +823,7 @@ void kvm_tdp_mmu_zap_all(struct kvm *kvm)
 	int i;
 
 	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++)
-		flush = kvm_tdp_mmu_zap_gfn_range(kvm, i, 0, -1ull,
-						  flush, false);
+		flush = kvm_tdp_mmu_zap_gfn_range(kvm, i, 0, -1ull, flush);
 
 	if (flush)
 		kvm_flush_remote_tlbs(kvm);
@@ -940,7 +948,7 @@ static int tdp_mmu_map_handle_target_level(struct kvm_vcpu *vcpu, int write,
 
 	if (new_spte == iter->old_spte)
 		ret = RET_PF_SPURIOUS;
-	else if (!tdp_mmu_set_spte_atomic(vcpu->kvm, iter, new_spte))
+	else if (!tdp_mmu_map_set_spte_atomic(vcpu, iter, new_spte))
 		return RET_PF_RETRY;
 
 	/*
@@ -1044,9 +1052,8 @@ int kvm_tdp_mmu_map(struct kvm_vcpu *vcpu, gpa_t gpa, u32 error_code,
 			new_spte = make_nonleaf_spte(child_pt,
 						     !shadow_accessed_mask);
 
-			if (tdp_mmu_set_spte_atomic(vcpu->kvm, &iter,
-						    new_spte)) {
-				tdp_mmu_link_page(vcpu->kvm, sp, true,
+			if (tdp_mmu_set_spte_atomic_no_dirty_log(vcpu->kvm, &iter, new_spte)) {
+				tdp_mmu_link_page(vcpu->kvm, sp,
 						  huge_page_disallowed &&
 						  req_level >= iter.level);
 
@@ -1255,8 +1262,8 @@ retry:
  * only affect leaf SPTEs down to min_level.
  * Returns true if an SPTE has been changed and the TLBs need to be flushed.
  */
-bool kvm_tdp_mmu_wrprot_slot(struct kvm *kvm, struct kvm_memory_slot *slot,
-			     int min_level)
+bool kvm_tdp_mmu_wrprot_slot(struct kvm *kvm,
+			     const struct kvm_memory_slot *slot, int min_level)
 {
 	struct kvm_mmu_page *root;
 	bool spte_set = false;
@@ -1326,7 +1333,8 @@ retry:
  * each SPTE. Returns true if an SPTE has been changed and the TLBs need to
  * be flushed.
  */
-bool kvm_tdp_mmu_clear_dirty_slot(struct kvm *kvm, struct kvm_memory_slot *slot)
+bool kvm_tdp_mmu_clear_dirty_slot(struct kvm *kvm,
+				  const struct kvm_memory_slot *slot)
 {
 	struct kvm_mmu_page *root;
 	bool spte_set = false;
@@ -1529,6 +1537,8 @@ bool kvm_tdp_mmu_write_protect_gfn(struct kvm *kvm,
 /*
  * Return the level of the lowest level SPTE added to sptes.
  * That SPTE may be non-present.
+ *
+ * Must be called between kvm_tdp_mmu_walk_lockless_{begin,end}.
  */
 int kvm_tdp_mmu_get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes,
 			 int *root_level)
@@ -1540,14 +1550,47 @@ int kvm_tdp_mmu_get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes,
 
 	*root_level = vcpu->arch.mmu->shadow_root_level;
 
-	rcu_read_lock();
-
 	tdp_mmu_for_each_pte(iter, mmu, gfn, gfn + 1) {
 		leaf = iter.level;
 		sptes[leaf] = iter.old_spte;
 	}
 
-	rcu_read_unlock();
-
 	return leaf;
 }
+
+/*
+ * Returns the last level spte pointer of the shadow page walk for the given
+ * gpa, and sets *spte to the spte value. This spte may be non-preset. If no
+ * walk could be performed, returns NULL and *spte does not contain valid data.
+ *
+ * Contract:
+ *  - Must be called between kvm_tdp_mmu_walk_lockless_{begin,end}.
+ *  - The returned sptep must not be used after kvm_tdp_mmu_walk_lockless_end.
+ *
+ * WARNING: This function is only intended to be called during fast_page_fault.
+ */
+u64 *kvm_tdp_mmu_fast_pf_get_last_sptep(struct kvm_vcpu *vcpu, u64 addr,
+					u64 *spte)
+{
+	struct tdp_iter iter;
+	struct kvm_mmu *mmu = vcpu->arch.mmu;
+	gfn_t gfn = addr >> PAGE_SHIFT;
+	tdp_ptep_t sptep = NULL;
+
+	tdp_mmu_for_each_pte(iter, mmu, gfn, gfn + 1) {
+		*spte = iter.old_spte;
+		sptep = iter.sptep;
+	}
+
+	/*
+	 * Perform the rcu_dereference to get the raw spte pointer value since
+	 * we are passing it up to fast_page_fault, which is shared with the
+	 * legacy MMU and thus does not retain the TDP MMU-specific __rcu
+	 * annotation.
+	 *
+	 * This is safe since fast_page_fault obeys the contracts of this
+	 * function as well as all TDP MMU contracts around modifying SPTEs
+	 * outside of mmu_lock.
+	 */
+	return rcu_dereference(sptep);
+}
diff --git a/arch/x86/kvm/mmu/tdp_mmu.h b/arch/x86/kvm/mmu/tdp_mmu.h
index 1cae4485b3bc..358f447d4012 100644
--- a/arch/x86/kvm/mmu/tdp_mmu.h
+++ b/arch/x86/kvm/mmu/tdp_mmu.h
@@ -20,14 +20,11 @@ void kvm_tdp_mmu_put_root(struct kvm *kvm, struct kvm_mmu_page *root,
 			  bool shared);
 
 bool __kvm_tdp_mmu_zap_gfn_range(struct kvm *kvm, int as_id, gfn_t start,
-				 gfn_t end, bool can_yield, bool flush,
-				 bool shared);
+				 gfn_t end, bool can_yield, bool flush);
 static inline bool kvm_tdp_mmu_zap_gfn_range(struct kvm *kvm, int as_id,
-					     gfn_t start, gfn_t end, bool flush,
-					     bool shared)
+					     gfn_t start, gfn_t end, bool flush)
 {
-	return __kvm_tdp_mmu_zap_gfn_range(kvm, as_id, start, end, true, flush,
-					   shared);
+	return __kvm_tdp_mmu_zap_gfn_range(kvm, as_id, start, end, true, flush);
 }
 static inline bool kvm_tdp_mmu_zap_sp(struct kvm *kvm, struct kvm_mmu_page *sp)
 {
@@ -44,7 +41,7 @@ static inline bool kvm_tdp_mmu_zap_sp(struct kvm *kvm, struct kvm_mmu_page *sp)
 	 */
 	lockdep_assert_held_write(&kvm->mmu_lock);
 	return __kvm_tdp_mmu_zap_gfn_range(kvm, kvm_mmu_page_as_id(sp),
-					   sp->gfn, end, false, false, false);
+					   sp->gfn, end, false, false);
 }
 
 void kvm_tdp_mmu_zap_all(struct kvm *kvm);
@@ -61,10 +58,10 @@ bool kvm_tdp_mmu_age_gfn_range(struct kvm *kvm, struct kvm_gfn_range *range);
 bool kvm_tdp_mmu_test_age_gfn(struct kvm *kvm, struct kvm_gfn_range *range);
 bool kvm_tdp_mmu_set_spte_gfn(struct kvm *kvm, struct kvm_gfn_range *range);
 
-bool kvm_tdp_mmu_wrprot_slot(struct kvm *kvm, struct kvm_memory_slot *slot,
-			     int min_level);
+bool kvm_tdp_mmu_wrprot_slot(struct kvm *kvm,
+			     const struct kvm_memory_slot *slot, int min_level);
 bool kvm_tdp_mmu_clear_dirty_slot(struct kvm *kvm,
-				  struct kvm_memory_slot *slot);
+				  const struct kvm_memory_slot *slot);
 void kvm_tdp_mmu_clear_dirty_pt_masked(struct kvm *kvm,
 				       struct kvm_memory_slot *slot,
 				       gfn_t gfn, unsigned long mask,
@@ -77,8 +74,20 @@ bool kvm_tdp_mmu_write_protect_gfn(struct kvm *kvm,
 				   struct kvm_memory_slot *slot, gfn_t gfn,
 				   int min_level);
 
+static inline void kvm_tdp_mmu_walk_lockless_begin(void)
+{
+	rcu_read_lock();
+}
+
+static inline void kvm_tdp_mmu_walk_lockless_end(void)
+{
+	rcu_read_unlock();
+}
+
 int kvm_tdp_mmu_get_walk(struct kvm_vcpu *vcpu, u64 addr, u64 *sptes,
 			 int *root_level);
+u64 *kvm_tdp_mmu_fast_pf_get_last_sptep(struct kvm_vcpu *vcpu, u64 addr,
+					u64 *spte);
 
 #ifdef CONFIG_X86_64
 bool kvm_mmu_init_tdp_mmu(struct kvm *kvm);
diff --git a/arch/x86/kvm/pmu.c b/arch/x86/kvm/pmu.c
index 827886c12c16..0772bad9165c 100644
--- a/arch/x86/kvm/pmu.c
+++ b/arch/x86/kvm/pmu.c
@@ -137,18 +137,20 @@ static void pmc_reprogram_counter(struct kvm_pmc *pmc, u32 type,
 	pmc->perf_event = event;
 	pmc_to_pmu(pmc)->event_count++;
 	clear_bit(pmc->idx, pmc_to_pmu(pmc)->reprogram_pmi);
+	pmc->is_paused = false;
 }
 
 static void pmc_pause_counter(struct kvm_pmc *pmc)
 {
 	u64 counter = pmc->counter;
 
-	if (!pmc->perf_event)
+	if (!pmc->perf_event || pmc->is_paused)
 		return;
 
 	/* update counter, reset event value to avoid redundant accumulation */
 	counter += perf_event_pause(pmc->perf_event, true);
 	pmc->counter = counter & pmc_bitmask(pmc);
+	pmc->is_paused = true;
 }
 
 static bool pmc_resume_counter(struct kvm_pmc *pmc)
@@ -163,6 +165,7 @@ static bool pmc_resume_counter(struct kvm_pmc *pmc)
 
 	/* reuse perf_event to serve as pmc_reprogram_counter() does*/
 	perf_event_enable(pmc->perf_event);
+	pmc->is_paused = false;
 
 	clear_bit(pmc->idx, (unsigned long *)&pmc_to_pmu(pmc)->reprogram_pmi);
 	return true;
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index 67e753edfa22..0e4f2b1fa9fb 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -55,7 +55,7 @@ static inline u64 pmc_read_counter(struct kvm_pmc *pmc)
 	u64 counter, enabled, running;
 
 	counter = pmc->counter;
-	if (pmc->perf_event)
+	if (pmc->perf_event && !pmc->is_paused)
 		counter += perf_event_read_value(pmc->perf_event,
 						 &enabled, &running);
 	/* FIXME: Scaling needed? */
diff --git a/arch/x86/kvm/svm/avic.c b/arch/x86/kvm/svm/avic.c
index a8ad78a2faa1..8052d92069e0 100644
--- a/arch/x86/kvm/svm/avic.c
+++ b/arch/x86/kvm/svm/avic.c
@@ -197,6 +197,8 @@ void avic_init_vmcb(struct vcpu_svm *svm)
 	vmcb->control.avic_logical_id = lpa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id = ppa & AVIC_HPA_MASK;
 	vmcb->control.avic_physical_id |= AVIC_MAX_PHYSICAL_ID_COUNT;
+	vmcb->control.avic_vapic_bar = APIC_DEFAULT_PHYS_BASE & VMCB_AVIC_APIC_BAR_MASK;
+
 	if (kvm_apicv_activated(svm->vcpu.kvm))
 		vmcb->control.int_ctl |= AVIC_ENABLE_MASK;
 	else
@@ -225,31 +227,26 @@ static u64 *avic_get_physical_id_entry(struct kvm_vcpu *vcpu,
  * field of the VMCB. Therefore, we set up the
  * APIC_ACCESS_PAGE_PRIVATE_MEMSLOT (4KB) here.
  */
-static int avic_update_access_page(struct kvm *kvm, bool activate)
+static int avic_alloc_access_page(struct kvm *kvm)
 {
 	void __user *ret;
 	int r = 0;
 
 	mutex_lock(&kvm->slots_lock);
-	/*
-	 * During kvm_destroy_vm(), kvm_pit_set_reinject() could trigger
-	 * APICv mode change, which update APIC_ACCESS_PAGE_PRIVATE_MEMSLOT
-	 * memory region. So, we need to ensure that kvm->mm == current->mm.
-	 */
-	if ((kvm->arch.apic_access_memslot_enabled == activate) ||
-	    (kvm->mm != current->mm))
+
+	if (kvm->arch.apic_access_memslot_enabled)
 		goto out;
 
 	ret = __x86_set_memory_region(kvm,
 				      APIC_ACCESS_PAGE_PRIVATE_MEMSLOT,
 				      APIC_DEFAULT_PHYS_BASE,
-				      activate ? PAGE_SIZE : 0);
+				      PAGE_SIZE);
 	if (IS_ERR(ret)) {
 		r = PTR_ERR(ret);
 		goto out;
 	}
 
-	kvm->arch.apic_access_memslot_enabled = activate;
+	kvm->arch.apic_access_memslot_enabled = true;
 out:
 	mutex_unlock(&kvm->slots_lock);
 	return r;
@@ -270,7 +267,7 @@ static int avic_init_backing_page(struct kvm_vcpu *vcpu)
 	if (kvm_apicv_activated(vcpu->kvm)) {
 		int ret;
 
-		ret = avic_update_access_page(vcpu->kvm, true);
+		ret = avic_alloc_access_page(vcpu->kvm);
 		if (ret)
 			return ret;
 	}
@@ -587,17 +584,6 @@ void avic_post_state_restore(struct kvm_vcpu *vcpu)
 	avic_handle_ldr_update(vcpu);
 }
 
-void svm_toggle_avic_for_irq_window(struct kvm_vcpu *vcpu, bool activate)
-{
-	if (!enable_apicv || !lapic_in_kernel(vcpu))
-		return;
-
-	srcu_read_unlock(&vcpu->kvm->srcu, vcpu->srcu_idx);
-	kvm_request_apicv_update(vcpu->kvm, activate,
-				 APICV_INHIBIT_REASON_IRQWIN);
-	vcpu->srcu_idx = srcu_read_lock(&vcpu->kvm->srcu);
-}
-
 void svm_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
 {
 	return;
@@ -667,6 +653,11 @@ void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 	}
 	vmcb_mark_dirty(vmcb, VMCB_AVIC);
 
+	if (activated)
+		avic_vcpu_load(vcpu, vcpu->cpu);
+	else
+		avic_vcpu_put(vcpu);
+
 	svm_set_pi_irte_mode(vcpu, activated);
 }
 
@@ -918,10 +909,6 @@ bool svm_check_apicv_inhibit_reasons(ulong bit)
 	return supported & BIT(bit);
 }
 
-void svm_pre_update_apicv_exec_ctrl(struct kvm *kvm, bool activate)
-{
-	avic_update_access_page(kvm, activate);
-}
 
 static inline int
 avic_update_iommu_vcpu_affinity(struct kvm_vcpu *vcpu, int cpu, bool r)
@@ -960,9 +947,6 @@ void avic_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 	int h_physical_id = kvm_cpu_get_apicid(cpu);
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (!kvm_vcpu_apicv_active(vcpu))
-		return;
-
 	/*
 	 * Since the host physical APIC id is 8 bits,
 	 * we can support host APIC ID upto 255.
@@ -990,9 +974,6 @@ void avic_vcpu_put(struct kvm_vcpu *vcpu)
 	u64 entry;
 	struct vcpu_svm *svm = to_svm(vcpu);
 
-	if (!kvm_vcpu_apicv_active(vcpu))
-		return;
-
 	entry = READ_ONCE(*(svm->avic_physical_id_cache));
 	if (entry & AVIC_PHYSICAL_ID_ENTRY_IS_RUNNING_MASK)
 		avic_update_iommu_vcpu_affinity(vcpu, -1, 0);
@@ -1009,6 +990,10 @@ static void avic_set_running(struct kvm_vcpu *vcpu, bool is_run)
 	struct vcpu_svm *svm = to_svm(vcpu);
 
 	svm->avic_is_running = is_run;
+
+	if (!kvm_vcpu_apicv_active(vcpu))
+		return;
+
 	if (is_run)
 		avic_vcpu_load(vcpu, vcpu->cpu);
 	else
diff --git a/arch/x86/kvm/svm/nested.c b/arch/x86/kvm/svm/nested.c
index e5515477c30a..2545d0c61985 100644
--- a/arch/x86/kvm/svm/nested.c
+++ b/arch/x86/kvm/svm/nested.c
@@ -666,11 +666,6 @@ int nested_svm_vmrun(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-
-	/* Clear internal status */
-	kvm_clear_exception_queue(vcpu);
-	kvm_clear_interrupt_queue(vcpu);
-
 	/*
 	 * Since vmcb01 is not in use, we can use it to store some of the L1
 	 * state.
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 7fbce342eec4..75e0b21ad07c 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -28,8 +28,6 @@
 #include "cpuid.h"
 #include "trace.h"
 
-#define __ex(x) __kvm_handle_fault_on_reboot(x)
-
 #ifndef CONFIG_KVM_AMD_SEV
 /*
  * When this config is not defined, SEV feature is not supported and APIs in
@@ -584,6 +582,7 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm)
 	save->xcr0 = svm->vcpu.arch.xcr0;
 	save->pkru = svm->vcpu.arch.pkru;
 	save->xss  = svm->vcpu.arch.ia32_xss;
+	save->dr6  = svm->vcpu.arch.dr6;
 
 	/*
 	 * SEV-ES will use a VMSA that is pointed to by the VMCB, not
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index 69639f9624f5..05e8d4d27969 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -46,8 +46,6 @@
 #include "kvm_onhyperv.h"
 #include "svm_onhyperv.h"
 
-#define __ex(x) __kvm_handle_fault_on_reboot(x)
-
 MODULE_AUTHOR("Qumranet");
 MODULE_LICENSE("GPL");
 
@@ -261,7 +259,7 @@ u32 svm_msrpm_offset(u32 msr)
 static int get_max_npt_level(void)
 {
 #ifdef CONFIG_X86_64
-	return PT64_ROOT_4LEVEL;
+	return pgtable_l5_enabled() ? PT64_ROOT_5LEVEL : PT64_ROOT_4LEVEL;
 #else
 	return PT32E_ROOT_LEVEL;
 #endif
@@ -462,11 +460,6 @@ static int has_svm(void)
 		return 0;
 	}
 
-	if (pgtable_l5_enabled()) {
-		pr_info("KVM doesn't yet support 5-level paging on AMD SVM\n");
-		return 0;
-	}
-
 	return 1;
 }
 
@@ -1015,7 +1008,9 @@ static __init int svm_hardware_setup(void)
 	if (!boot_cpu_has(X86_FEATURE_NPT))
 		npt_enabled = false;
 
-	kvm_configure_mmu(npt_enabled, get_max_npt_level(), PG_LEVEL_1G);
+	/* Force VM NPT level equal to the host's max NPT level */
+	kvm_configure_mmu(npt_enabled, get_max_npt_level(),
+			  get_max_npt_level(), PG_LEVEL_1G);
 	pr_info("kvm: Nested Paging %sabled\n", npt_enabled ? "en" : "dis");
 
 	/* Note, SEV setup consumes npt_enabled. */
@@ -1161,8 +1156,6 @@ static void init_vmcb(struct kvm_vcpu *vcpu)
 	struct vmcb_control_area *control = &svm->vmcb->control;
 	struct vmcb_save_area *save = &svm->vmcb->save;
 
-	vcpu->arch.hflags = 0;
-
 	svm_set_intercept(svm, INTERCEPT_CR0_READ);
 	svm_set_intercept(svm, INTERCEPT_CR3_READ);
 	svm_set_intercept(svm, INTERCEPT_CR4_READ);
@@ -1241,29 +1234,14 @@ static void init_vmcb(struct kvm_vcpu *vcpu)
 		SVM_SELECTOR_S_MASK | SVM_SELECTOR_CODE_MASK;
 	save->cs.limit = 0xffff;
 
+	save->gdtr.base = 0;
 	save->gdtr.limit = 0xffff;
+	save->idtr.base = 0;
 	save->idtr.limit = 0xffff;
 
 	init_sys_seg(&save->ldtr, SEG_TYPE_LDT);
 	init_sys_seg(&save->tr, SEG_TYPE_BUSY_TSS16);
 
-	svm_set_cr4(vcpu, 0);
-	svm_set_efer(vcpu, 0);
-	save->dr6 = 0xffff0ff0;
-	kvm_set_rflags(vcpu, X86_EFLAGS_FIXED);
-	save->rip = 0x0000fff0;
-	vcpu->arch.regs[VCPU_REGS_RIP] = save->rip;
-
-	/*
-	 * svm_set_cr0() sets PG and WP and clears NW and CD on save->cr0.
-	 * It also updates the guest-visible cr0 value.
-	 */
-	svm_set_cr0(vcpu, X86_CR0_NW | X86_CR0_CD | X86_CR0_ET);
-	kvm_mmu_reset_context(vcpu);
-
-	save->cr4 = X86_CR4_PAE;
-	/* rdx = ?? */
-
 	if (npt_enabled) {
 		/* Setup VMCB for Nested Paging */
 		control->nested_ctl |= SVM_NESTED_CTL_NP_ENABLE;
@@ -1273,14 +1251,12 @@ static void init_vmcb(struct kvm_vcpu *vcpu)
 		svm_clr_intercept(svm, INTERCEPT_CR3_WRITE);
 		save->g_pat = vcpu->arch.pat;
 		save->cr3 = 0;
-		save->cr4 = 0;
 	}
 	svm->current_vmcb->asid_generation = 0;
 	svm->asid = 0;
 
 	svm->nested.vmcb12_gpa = INVALID_GPA;
 	svm->nested.last_vmcb12_gpa = INVALID_GPA;
-	vcpu->arch.hflags = 0;
 
 	if (!kvm_pause_in_guest(vcpu->kvm)) {
 		control->pause_filter_count = pause_filter_count;
@@ -1330,25 +1306,11 @@ static void init_vmcb(struct kvm_vcpu *vcpu)
 static void svm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
-	u32 dummy;
-	u32 eax = 1;
 
 	svm->spec_ctrl = 0;
 	svm->virt_spec_ctrl = 0;
 
-	if (!init_event) {
-		vcpu->arch.apic_base = APIC_DEFAULT_PHYS_BASE |
-				       MSR_IA32_APICBASE_ENABLE;
-		if (kvm_vcpu_is_reset_bsp(vcpu))
-			vcpu->arch.apic_base |= MSR_IA32_APICBASE_BSP;
-	}
 	init_vmcb(vcpu);
-
-	kvm_cpuid(vcpu, &eax, &dummy, &dummy, &dummy, false);
-	kvm_rdx_write(vcpu, eax);
-
-	if (kvm_vcpu_apicv_active(vcpu) && !init_event)
-		avic_update_vapic_bar(svm, APIC_DEFAULT_PHYS_BASE);
 }
 
 void svm_switch_vmcb(struct vcpu_svm *svm, struct kvm_vmcb_info *target_vmcb)
@@ -1513,12 +1475,15 @@ static void svm_vcpu_load(struct kvm_vcpu *vcpu, int cpu)
 		sd->current_vmcb = svm->vmcb;
 		indirect_branch_prediction_barrier();
 	}
-	avic_vcpu_load(vcpu, cpu);
+	if (kvm_vcpu_apicv_active(vcpu))
+		avic_vcpu_load(vcpu, cpu);
 }
 
 static void svm_vcpu_put(struct kvm_vcpu *vcpu)
 {
-	avic_vcpu_put(vcpu);
+	if (kvm_vcpu_apicv_active(vcpu))
+		avic_vcpu_put(vcpu);
+
 	svm_prepare_host_switch(vcpu);
 
 	++vcpu->stat.host_state_reload;
@@ -1560,7 +1525,7 @@ static void svm_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 		load_pdptrs(vcpu, vcpu->arch.walk_mmu, kvm_read_cr3(vcpu));
 		break;
 	default:
-		WARN_ON_ONCE(1);
+		KVM_BUG_ON(1, vcpu->kvm);
 	}
 }
 
@@ -2078,11 +2043,15 @@ static int shutdown_interception(struct kvm_vcpu *vcpu)
 		return -EINVAL;
 
 	/*
-	 * VMCB is undefined after a SHUTDOWN intercept
-	 * so reinitialize it.
+	 * VMCB is undefined after a SHUTDOWN intercept.  INIT the vCPU to put
+	 * the VMCB in a known good state.  Unfortuately, KVM doesn't have
+	 * KVM_MP_STATE_SHUTDOWN and can't add it without potentially breaking
+	 * userspace.  At a platform view, INIT is acceptable behavior as
+	 * there exist bare metal platforms that automatically INIT the CPU
+	 * in response to shutdown.
 	 */
 	clear_page(svm->vmcb);
-	init_vmcb(vcpu);
+	kvm_vcpu_reset(vcpu, true);
 
 	kvm_run->exit_reason = KVM_EXIT_SHUTDOWN;
 	return 0;
@@ -2993,10 +2962,6 @@ static int svm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
 		svm->msr_decfg = data;
 		break;
 	}
-	case MSR_IA32_APICBASE:
-		if (kvm_vcpu_apicv_active(vcpu))
-			avic_update_vapic_bar(to_svm(vcpu), data);
-		fallthrough;
 	default:
 		return kvm_set_msr_common(vcpu, msr);
 	}
@@ -3021,7 +2986,7 @@ static int interrupt_window_interception(struct kvm_vcpu *vcpu)
 	 * In this case AVIC was temporarily disabled for
 	 * requesting the IRQ window and we have to re-enable it.
 	 */
-	svm_toggle_avic_for_irq_window(vcpu, true);
+	kvm_request_apicv_update(vcpu->kvm, true, APICV_INHIBIT_REASON_IRQWIN);
 
 	++vcpu->stat.irq_window_exits;
 	return 1;
@@ -3269,12 +3234,14 @@ static void dump_vmcb(struct kvm_vcpu *vcpu)
 	       "excp_to:", save->last_excp_to);
 }
 
-static int svm_handle_invalid_exit(struct kvm_vcpu *vcpu, u64 exit_code)
+static bool svm_check_exit_valid(struct kvm_vcpu *vcpu, u64 exit_code)
 {
-	if (exit_code < ARRAY_SIZE(svm_exit_handlers) &&
-	    svm_exit_handlers[exit_code])
-		return 0;
+	return (exit_code < ARRAY_SIZE(svm_exit_handlers) &&
+		svm_exit_handlers[exit_code]);
+}
 
+static int svm_handle_invalid_exit(struct kvm_vcpu *vcpu, u64 exit_code)
+{
 	vcpu_unimpl(vcpu, "svm: unexpected exit reason 0x%llx\n", exit_code);
 	dump_vmcb(vcpu);
 	vcpu->run->exit_reason = KVM_EXIT_INTERNAL_ERROR;
@@ -3282,14 +3249,13 @@ static int svm_handle_invalid_exit(struct kvm_vcpu *vcpu, u64 exit_code)
 	vcpu->run->internal.ndata = 2;
 	vcpu->run->internal.data[0] = exit_code;
 	vcpu->run->internal.data[1] = vcpu->arch.last_vmentry_cpu;
-
-	return -EINVAL;
+	return 0;
 }
 
 int svm_invoke_exit_handler(struct kvm_vcpu *vcpu, u64 exit_code)
 {
-	if (svm_handle_invalid_exit(vcpu, exit_code))
-		return 0;
+	if (!svm_check_exit_valid(vcpu, exit_code))
+		return svm_handle_invalid_exit(vcpu, exit_code);
 
 #ifdef CONFIG_RETPOLINE
 	if (exit_code == SVM_EXIT_MSR)
@@ -3573,7 +3539,7 @@ static void svm_enable_irq_window(struct kvm_vcpu *vcpu)
 		 * via AVIC. In such case, we need to temporarily disable AVIC,
 		 * and fallback to injecting IRQ via V_IRQ.
 		 */
-		svm_toggle_avic_for_irq_window(vcpu, false);
+		kvm_request_apicv_update(vcpu->kvm, false, APICV_INHIBIT_REASON_IRQWIN);
 		svm_set_vintr(svm);
 	}
 }
@@ -3808,6 +3774,8 @@ static __no_kcsan fastpath_t svm_vcpu_run(struct kvm_vcpu *vcpu)
 
 	pre_svm_run(vcpu);
 
+	WARN_ON_ONCE(kvm_apicv_activated(vcpu->kvm) != kvm_vcpu_apicv_active(vcpu));
+
 	sync_lapic_to_cr8(vcpu);
 
 	if (unlikely(svm->asid != svm->vmcb->control.asid)) {
@@ -4610,7 +4578,6 @@ static struct kvm_x86_ops svm_x86_ops __initdata = {
 	.set_virtual_apic_mode = svm_set_virtual_apic_mode,
 	.refresh_apicv_exec_ctrl = svm_refresh_apicv_exec_ctrl,
 	.check_apicv_inhibit_reasons = svm_check_apicv_inhibit_reasons,
-	.pre_update_apicv_exec_ctrl = svm_pre_update_apicv_exec_ctrl,
 	.load_eoi_exitmap = svm_load_eoi_exitmap,
 	.hwapic_irr_update = svm_hwapic_irr_update,
 	.hwapic_isr_update = svm_hwapic_isr_update,
diff --git a/arch/x86/kvm/svm/svm.h b/arch/x86/kvm/svm/svm.h
index bd0fe94c2920..524d943f3efc 100644
--- a/arch/x86/kvm/svm/svm.h
+++ b/arch/x86/kvm/svm/svm.h
@@ -503,12 +503,6 @@ extern struct kvm_x86_nested_ops svm_nested_ops;
 
 #define VMCB_AVIC_APIC_BAR_MASK		0xFFFFFFFFFF000ULL
 
-static inline void avic_update_vapic_bar(struct vcpu_svm *svm, u64 data)
-{
-	svm->vmcb->control.avic_vapic_bar = data & VMCB_AVIC_APIC_BAR_MASK;
-	vmcb_mark_dirty(svm->vmcb, VMCB_AVIC);
-}
-
 static inline bool avic_vcpu_is_running(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_svm *svm = to_svm(vcpu);
@@ -524,7 +518,6 @@ int avic_ga_log_notifier(u32 ga_tag);
 void avic_vm_destroy(struct kvm *kvm);
 int avic_vm_init(struct kvm *kvm);
 void avic_init_vmcb(struct vcpu_svm *svm);
-void svm_toggle_avic_for_irq_window(struct kvm_vcpu *vcpu, bool activate);
 int avic_incomplete_ipi_interception(struct kvm_vcpu *vcpu);
 int avic_unaccelerated_access_interception(struct kvm_vcpu *vcpu);
 int avic_init_vcpu(struct vcpu_svm *svm);
@@ -534,7 +527,6 @@ void avic_post_state_restore(struct kvm_vcpu *vcpu);
 void svm_set_virtual_apic_mode(struct kvm_vcpu *vcpu);
 void svm_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu);
 bool svm_check_apicv_inhibit_reasons(ulong bit);
-void svm_pre_update_apicv_exec_ctrl(struct kvm *kvm, bool activate);
 void svm_load_eoi_exitmap(struct kvm_vcpu *vcpu, u64 *eoi_exit_bitmap);
 void svm_hwapic_irr_update(struct kvm_vcpu *vcpu, int max_irr);
 void svm_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr);
diff --git a/arch/x86/kvm/svm/svm_ops.h b/arch/x86/kvm/svm/svm_ops.h
index 8170f2a5a16f..22e2b019de37 100644
--- a/arch/x86/kvm/svm/svm_ops.h
+++ b/arch/x86/kvm/svm/svm_ops.h
@@ -4,7 +4,7 @@
 
 #include <linux/compiler_types.h>
 
-#include <asm/kvm_host.h>
+#include "x86.h"
 
 #define svm_asm(insn, clobber...)				\
 do {								\
diff --git a/arch/x86/kvm/vmx/evmcs.c b/arch/x86/kvm/vmx/evmcs.c
index 896b2a50b4aa..0dab1b7b529f 100644
--- a/arch/x86/kvm/vmx/evmcs.c
+++ b/arch/x86/kvm/vmx/evmcs.c
@@ -14,7 +14,6 @@ DEFINE_STATIC_KEY_FALSE(enable_evmcs);
 
 #if IS_ENABLED(CONFIG_HYPERV)
 
-#define ROL16(val, n) ((u16)(((u16)(val) << (n)) | ((u16)(val) >> (16 - (n)))))
 #define EVMCS1_OFFSET(x) offsetof(struct hv_enlightened_vmcs, x)
 #define EVMCS1_FIELD(number, name, clean_field)[ROL16(number, 6)] = \
 		{EVMCS1_OFFSET(name), clean_field}
diff --git a/arch/x86/kvm/vmx/evmcs.h b/arch/x86/kvm/vmx/evmcs.h
index 2ec9b46f0d0c..152ab0aa82cf 100644
--- a/arch/x86/kvm/vmx/evmcs.h
+++ b/arch/x86/kvm/vmx/evmcs.h
@@ -73,8 +73,6 @@ struct evmcs_field {
 extern const struct evmcs_field vmcs_field_to_evmcs_1[];
 extern const unsigned int nr_evmcs_1_fields;
 
-#define ROL16(val, n) ((u16)(((u16)(val) << (n)) | ((u16)(val) >> (16 - (n)))))
-
 static __always_inline int get_evmcs_offset(unsigned long field,
 					    u16 *clean_field)
 {
@@ -95,8 +93,6 @@ static __always_inline int get_evmcs_offset(unsigned long field,
 	return evmcs_field->offset;
 }
 
-#undef ROL16
-
 static inline void evmcs_write64(unsigned long field, u64 value)
 {
 	u16 clean_field;
diff --git a/arch/x86/kvm/vmx/nested.c b/arch/x86/kvm/vmx/nested.c
index b3f77d18eb5a..ccb03d69546c 100644
--- a/arch/x86/kvm/vmx/nested.c
+++ b/arch/x86/kvm/vmx/nested.c
@@ -2207,7 +2207,8 @@ static void prepare_vmcs02_early_rare(struct vcpu_vmx *vmx,
 	}
 }
 
-static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
+static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct loaded_vmcs *vmcs01,
+				 struct vmcs12 *vmcs12)
 {
 	u32 exec_control;
 	u64 guest_efer = nested_vmx_calc_efer(vmx, vmcs12);
@@ -2218,23 +2219,22 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 	/*
 	 * PIN CONTROLS
 	 */
-	exec_control = vmx_pin_based_exec_ctrl(vmx);
+	exec_control = __pin_controls_get(vmcs01);
 	exec_control |= (vmcs12->pin_based_vm_exec_control &
 			 ~PIN_BASED_VMX_PREEMPTION_TIMER);
 
 	/* Posted interrupts setting is only taken from vmcs12.  */
-	if (nested_cpu_has_posted_intr(vmcs12)) {
+	vmx->nested.pi_pending = false;
+	if (nested_cpu_has_posted_intr(vmcs12))
 		vmx->nested.posted_intr_nv = vmcs12->posted_intr_nv;
-		vmx->nested.pi_pending = false;
-	} else {
+	else
 		exec_control &= ~PIN_BASED_POSTED_INTR;
-	}
 	pin_controls_set(vmx, exec_control);
 
 	/*
 	 * EXEC CONTROLS
 	 */
-	exec_control = vmx_exec_control(vmx); /* L0's desires */
+	exec_control = __exec_controls_get(vmcs01); /* L0's desires */
 	exec_control &= ~CPU_BASED_INTR_WINDOW_EXITING;
 	exec_control &= ~CPU_BASED_NMI_WINDOW_EXITING;
 	exec_control &= ~CPU_BASED_TPR_SHADOW;
@@ -2271,10 +2271,11 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 	 * SECONDARY EXEC CONTROLS
 	 */
 	if (cpu_has_secondary_exec_ctrls()) {
-		exec_control = vmx->secondary_exec_control;
+		exec_control = __secondary_exec_controls_get(vmcs01);
 
 		/* Take the following fields only from vmcs12 */
 		exec_control &= ~(SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
+				  SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE |
 				  SECONDARY_EXEC_ENABLE_INVPCID |
 				  SECONDARY_EXEC_ENABLE_RDTSCP |
 				  SECONDARY_EXEC_XSAVES |
@@ -2282,7 +2283,9 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 				  SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY |
 				  SECONDARY_EXEC_APIC_REGISTER_VIRT |
 				  SECONDARY_EXEC_ENABLE_VMFUNC |
-				  SECONDARY_EXEC_TSC_SCALING);
+				  SECONDARY_EXEC_TSC_SCALING |
+				  SECONDARY_EXEC_DESC);
+
 		if (nested_cpu_has(vmcs12,
 				   CPU_BASED_ACTIVATE_SECONDARY_CONTROLS))
 			exec_control |= vmcs12->secondary_vm_exec_control;
@@ -2322,8 +2325,9 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 	 * on the related bits (if supported by the CPU) in the hope that
 	 * we can avoid VMWrites during vmx_set_efer().
 	 */
-	exec_control = (vmcs12->vm_entry_controls | vmx_vmentry_ctrl()) &
-			~VM_ENTRY_IA32E_MODE & ~VM_ENTRY_LOAD_IA32_EFER;
+	exec_control = __vm_entry_controls_get(vmcs01);
+	exec_control |= vmcs12->vm_entry_controls;
+	exec_control &= ~(VM_ENTRY_IA32E_MODE | VM_ENTRY_LOAD_IA32_EFER);
 	if (cpu_has_load_ia32_efer()) {
 		if (guest_efer & EFER_LMA)
 			exec_control |= VM_ENTRY_IA32E_MODE;
@@ -2339,9 +2343,11 @@ static void prepare_vmcs02_early(struct vcpu_vmx *vmx, struct vmcs12 *vmcs12)
 	 * we should use its exit controls. Note that VM_EXIT_LOAD_IA32_EFER
 	 * bits may be modified by vmx_set_efer() in prepare_vmcs02().
 	 */
-	exec_control = vmx_vmexit_ctrl();
+	exec_control = __vm_exit_controls_get(vmcs01);
 	if (cpu_has_load_ia32_efer() && guest_efer != host_efer)
 		exec_control |= VM_EXIT_LOAD_IA32_EFER;
+	else
+		exec_control &= ~VM_EXIT_LOAD_IA32_EFER;
 	vm_exit_controls_set(vmx, exec_control);
 
 	/*
@@ -3384,7 +3390,7 @@ enum nvmx_vmentry_status nested_vmx_enter_non_root_mode(struct kvm_vcpu *vcpu,
 
 	vmx_switch_vmcs(vcpu, &vmx->nested.vmcs02);
 
-	prepare_vmcs02_early(vmx, vmcs12);
+	prepare_vmcs02_early(vmx, &vmx->vmcs01, vmcs12);
 
 	if (from_vmentry) {
 		if (unlikely(!nested_get_vmcs12_pages(vcpu))) {
@@ -4304,7 +4310,7 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 		seg.l = 1;
 	else
 		seg.db = 1;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_CS);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_CS);
 	seg = (struct kvm_segment) {
 		.base = 0,
 		.limit = 0xFFFFFFFF,
@@ -4315,17 +4321,17 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 		.g = 1
 	};
 	seg.selector = vmcs12->host_ds_selector;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_DS);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_DS);
 	seg.selector = vmcs12->host_es_selector;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_ES);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_ES);
 	seg.selector = vmcs12->host_ss_selector;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_SS);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_SS);
 	seg.selector = vmcs12->host_fs_selector;
 	seg.base = vmcs12->host_fs_base;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_FS);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_FS);
 	seg.selector = vmcs12->host_gs_selector;
 	seg.base = vmcs12->host_gs_base;
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_GS);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_GS);
 	seg = (struct kvm_segment) {
 		.base = vmcs12->host_tr_base,
 		.limit = 0x67,
@@ -4333,14 +4339,15 @@ static void load_vmcs12_host_state(struct kvm_vcpu *vcpu,
 		.type = 11,
 		.present = 1
 	};
-	vmx_set_segment(vcpu, &seg, VCPU_SREG_TR);
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_TR);
+
+	memset(&seg, 0, sizeof(seg));
+	seg.unusable = 1;
+	__vmx_set_segment(vcpu, &seg, VCPU_SREG_LDTR);
 
 	kvm_set_dr(vcpu, 7, 0x400);
 	vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
 
-	if (cpu_has_vmx_msr_bitmap())
-		vmx_update_msr_bitmap(vcpu);
-
 	if (nested_vmx_load_msr(vcpu, vmcs12->vm_exit_msr_load_addr,
 				vmcs12->vm_exit_msr_load_count))
 		nested_vmx_abort(vcpu, VMX_ABORT_LOAD_HOST_MSR_FAIL);
@@ -4419,9 +4426,6 @@ static void nested_vmx_restore_host_state(struct kvm_vcpu *vcpu)
 
 	kvm_mmu_reset_context(vcpu);
 
-	if (cpu_has_vmx_msr_bitmap())
-		vmx_update_msr_bitmap(vcpu);
-
 	/*
 	 * This nasty bit of open coding is a compromise between blindly
 	 * loading L1's MSRs using the exit load lists (incorrect emulation
diff --git a/arch/x86/kvm/vmx/pmu_intel.c b/arch/x86/kvm/vmx/pmu_intel.c
index 9efc1a6b8693..10cc4f65c4ef 100644
--- a/arch/x86/kvm/vmx/pmu_intel.c
+++ b/arch/x86/kvm/vmx/pmu_intel.c
@@ -437,13 +437,13 @@ static int intel_pmu_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			    !(msr & MSR_PMC_FULL_WIDTH_BIT))
 				data = (s64)(s32)data;
 			pmc->counter += data - pmc_read_counter(pmc);
-			if (pmc->perf_event)
+			if (pmc->perf_event && !pmc->is_paused)
 				perf_event_period(pmc->perf_event,
 						  get_sample_period(pmc, data));
 			return 0;
 		} else if ((pmc = get_fixed_pmc(pmu, msr))) {
 			pmc->counter += data - pmc_read_counter(pmc);
-			if (pmc->perf_event)
+			if (pmc->perf_event && !pmc->is_paused)
 				perf_event_period(pmc->perf_event,
 						  get_sample_period(pmc, data));
 			return 0;
diff --git a/arch/x86/kvm/vmx/vmcs.h b/arch/x86/kvm/vmx/vmcs.h
index 4b9957e2bf5b..6e5de2e2b0da 100644
--- a/arch/x86/kvm/vmx/vmcs.h
+++ b/arch/x86/kvm/vmx/vmcs.h
@@ -11,6 +11,8 @@
 
 #include "capabilities.h"
 
+#define ROL16(val, n) ((u16)(((u16)(val) << (n)) | ((u16)(val) >> (16 - (n)))))
+
 struct vmcs_hdr {
 	u32 revision_id:31;
 	u32 shadow_vmcs:1;
diff --git a/arch/x86/kvm/vmx/vmcs12.c b/arch/x86/kvm/vmx/vmcs12.c
index d9f5d7c56ae3..cab6ba7a5005 100644
--- a/arch/x86/kvm/vmx/vmcs12.c
+++ b/arch/x86/kvm/vmx/vmcs12.c
@@ -2,7 +2,6 @@
 
 #include "vmcs12.h"
 
-#define ROL16(val, n) ((u16)(((u16)(val) << (n)) | ((u16)(val) >> (16 - (n)))))
 #define VMCS12_OFFSET(x) offsetof(struct vmcs12, x)
 #define FIELD(number, name)	[ROL16(number, 6)] = VMCS12_OFFSET(name)
 #define FIELD64(number, name)						\
diff --git a/arch/x86/kvm/vmx/vmcs12.h b/arch/x86/kvm/vmx/vmcs12.h
index 5e0e1b39f495..2a45f026ee11 100644
--- a/arch/x86/kvm/vmx/vmcs12.h
+++ b/arch/x86/kvm/vmx/vmcs12.h
@@ -364,8 +364,6 @@ static inline void vmx_check_vmcs12_offsets(void)
 extern const unsigned short vmcs_field_to_offset_table[];
 extern const unsigned int nr_vmcs12_fields;
 
-#define ROL16(val, n) ((u16)(((u16)(val) << (n)) | ((u16)(val) >> (16 - (n)))))
-
 static inline short vmcs_field_to_offset(unsigned long field)
 {
 	unsigned short offset;
@@ -385,8 +383,6 @@ static inline short vmcs_field_to_offset(unsigned long field)
 	return offset;
 }
 
-#undef ROL16
-
 static inline u64 vmcs12_read_any(struct vmcs12 *vmcs12, unsigned long field,
 				  u16 offset)
 {
diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c
index 927a552393b9..0c2c0d5ae873 100644
--- a/arch/x86/kvm/vmx/vmx.c
+++ b/arch/x86/kvm/vmx/vmx.c
@@ -136,8 +136,7 @@ module_param(allow_smaller_maxphyaddr, bool, S_IRUGO);
 #define KVM_VM_CR0_ALWAYS_OFF (X86_CR0_NW | X86_CR0_CD)
 #define KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR0_NE
 #define KVM_VM_CR0_ALWAYS_ON				\
-	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | 	\
-	 X86_CR0_WP | X86_CR0_PG | X86_CR0_PE)
+	(KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST | X86_CR0_PG | X86_CR0_PE)
 
 #define KVM_VM_CR4_ALWAYS_ON_UNRESTRICTED_GUEST X86_CR4_VMXE
 #define KVM_PMODE_VM_CR4_ALWAYS_ON (X86_CR4_PAE | X86_CR4_VMXE)
@@ -1648,11 +1647,12 @@ static void vmx_setup_uret_msr(struct vcpu_vmx *vmx, unsigned int msr,
 }
 
 /*
- * Set up the vmcs to automatically save and restore system
- * msrs.  Don't touch the 64-bit msrs if the guest is in legacy
- * mode, as fiddling with msrs is very expensive.
+ * Configuring user return MSRs to automatically save, load, and restore MSRs
+ * that need to be shoved into hardware when running the guest.  Note, omitting
+ * an MSR here does _NOT_ mean it's not emulated, only that it will not be
+ * loaded into hardware when running the guest.
  */
-static void setup_msrs(struct vcpu_vmx *vmx)
+static void vmx_setup_uret_msrs(struct vcpu_vmx *vmx)
 {
 #ifdef CONFIG_X86_64
 	bool load_syscall_msrs;
@@ -1682,9 +1682,6 @@ static void setup_msrs(struct vcpu_vmx *vmx)
 	 */
 	vmx_setup_uret_msr(vmx, MSR_IA32_TSX_CTRL, boot_cpu_has(X86_FEATURE_RTM));
 
-	if (cpu_has_vmx_msr_bitmap())
-		vmx_update_msr_bitmap(&vmx->vcpu);
-
 	/*
 	 * The set of MSRs to load may have changed, reload MSRs before the
 	 * next VM-Enter.
@@ -2263,8 +2260,11 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 		vcpu->arch.cr0 |= vmcs_readl(GUEST_CR0) & guest_owned_bits;
 		break;
 	case VCPU_EXREG_CR3:
-		if (is_unrestricted_guest(vcpu) ||
-		    (enable_ept && is_paging(vcpu)))
+		/*
+		 * When intercepting CR3 loads, e.g. for shadowing paging, KVM's
+		 * CR3 is loaded into hardware, not the guest's CR3.
+		 */
+		if (!(exec_controls_get(to_vmx(vcpu)) & CPU_BASED_CR3_LOAD_EXITING))
 			vcpu->arch.cr3 = vmcs_readl(GUEST_CR3);
 		break;
 	case VCPU_EXREG_CR4:
@@ -2274,7 +2274,7 @@ static void vmx_cache_reg(struct kvm_vcpu *vcpu, enum kvm_reg reg)
 		vcpu->arch.cr4 |= vmcs_readl(GUEST_CR4) & guest_owned_bits;
 		break;
 	default:
-		WARN_ON_ONCE(1);
+		KVM_BUG_ON(1, vcpu->kvm);
 		break;
 	}
 }
@@ -2733,7 +2733,7 @@ static void fix_pmode_seg(struct kvm_vcpu *vcpu, int seg,
 		save->dpl = save->selector & SEGMENT_RPL_MASK;
 		save->s = 1;
 	}
-	vmx_set_segment(vcpu, save, seg);
+	__vmx_set_segment(vcpu, save, seg);
 }
 
 static void enter_pmode(struct kvm_vcpu *vcpu)
@@ -2754,7 +2754,7 @@ static void enter_pmode(struct kvm_vcpu *vcpu)
 
 	vmx->rmode.vm86_active = 0;
 
-	vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
+	__vmx_set_segment(vcpu, &vmx->rmode.segs[VCPU_SREG_TR], VCPU_SREG_TR);
 
 	flags = vmcs_readl(GUEST_RFLAGS);
 	flags &= RMODE_GUEST_OWNED_EFLAGS_BITS;
@@ -2852,8 +2852,6 @@ static void enter_rmode(struct kvm_vcpu *vcpu)
 	fix_rmode_seg(VCPU_SREG_DS, &vmx->rmode.segs[VCPU_SREG_DS]);
 	fix_rmode_seg(VCPU_SREG_GS, &vmx->rmode.segs[VCPU_SREG_GS]);
 	fix_rmode_seg(VCPU_SREG_FS, &vmx->rmode.segs[VCPU_SREG_FS]);
-
-	kvm_mmu_reset_context(vcpu);
 }
 
 int vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
@@ -2874,7 +2872,7 @@ int vmx_set_efer(struct kvm_vcpu *vcpu, u64 efer)
 
 		msr->data = efer & ~EFER_LME;
 	}
-	setup_msrs(vmx);
+	vmx_setup_uret_msrs(vmx);
 	return 0;
 }
 
@@ -2997,42 +2995,24 @@ void ept_save_pdptrs(struct kvm_vcpu *vcpu)
 	kvm_register_mark_dirty(vcpu, VCPU_EXREG_PDPTR);
 }
 
-static void ept_update_paging_mode_cr0(unsigned long *hw_cr0,
-					unsigned long cr0,
-					struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-
-	if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
-		vmx_cache_reg(vcpu, VCPU_EXREG_CR3);
-	if (!(cr0 & X86_CR0_PG)) {
-		/* From paging/starting to nonpaging */
-		exec_controls_setbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
-					  CPU_BASED_CR3_STORE_EXITING);
-		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
-	} else if (!is_paging(vcpu)) {
-		/* From nonpaging to paging */
-		exec_controls_clearbit(vmx, CPU_BASED_CR3_LOAD_EXITING |
-					    CPU_BASED_CR3_STORE_EXITING);
-		vcpu->arch.cr0 = cr0;
-		vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
-	}
-
-	if (!(cr0 & X86_CR0_WP))
-		*hw_cr0 &= ~X86_CR0_WP;
-}
+#define CR3_EXITING_BITS (CPU_BASED_CR3_LOAD_EXITING | \
+			  CPU_BASED_CR3_STORE_EXITING)
 
 void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	unsigned long hw_cr0;
+	unsigned long hw_cr0, old_cr0_pg;
+	u32 tmp;
+
+	old_cr0_pg = kvm_read_cr0_bits(vcpu, X86_CR0_PG);
 
 	hw_cr0 = (cr0 & ~KVM_VM_CR0_ALWAYS_OFF);
 	if (is_unrestricted_guest(vcpu))
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON_UNRESTRICTED_GUEST;
 	else {
 		hw_cr0 |= KVM_VM_CR0_ALWAYS_ON;
+		if (!enable_ept)
+			hw_cr0 |= X86_CR0_WP;
 
 		if (vmx->rmode.vm86_active && (cr0 & X86_CR0_PE))
 			enter_pmode(vcpu);
@@ -3041,22 +3021,60 @@ void vmx_set_cr0(struct kvm_vcpu *vcpu, unsigned long cr0)
 			enter_rmode(vcpu);
 	}
 
+	vmcs_writel(CR0_READ_SHADOW, cr0);
+	vmcs_writel(GUEST_CR0, hw_cr0);
+	vcpu->arch.cr0 = cr0;
+	kvm_register_mark_available(vcpu, VCPU_EXREG_CR0);
+
 #ifdef CONFIG_X86_64
 	if (vcpu->arch.efer & EFER_LME) {
-		if (!is_paging(vcpu) && (cr0 & X86_CR0_PG))
+		if (!old_cr0_pg && (cr0 & X86_CR0_PG))
 			enter_lmode(vcpu);
-		if (is_paging(vcpu) && !(cr0 & X86_CR0_PG))
+		else if (old_cr0_pg && !(cr0 & X86_CR0_PG))
 			exit_lmode(vcpu);
 	}
 #endif
 
-	if (enable_ept && !is_unrestricted_guest(vcpu))
-		ept_update_paging_mode_cr0(&hw_cr0, cr0, vcpu);
+	if (enable_ept && !is_unrestricted_guest(vcpu)) {
+		/*
+		 * Ensure KVM has an up-to-date snapshot of the guest's CR3.  If
+		 * the below code _enables_ CR3 exiting, vmx_cache_reg() will
+		 * (correctly) stop reading vmcs.GUEST_CR3 because it thinks
+		 * KVM's CR3 is installed.
+		 */
+		if (!kvm_register_is_available(vcpu, VCPU_EXREG_CR3))
+			vmx_cache_reg(vcpu, VCPU_EXREG_CR3);
 
-	vmcs_writel(CR0_READ_SHADOW, cr0);
-	vmcs_writel(GUEST_CR0, hw_cr0);
-	vcpu->arch.cr0 = cr0;
-	kvm_register_mark_available(vcpu, VCPU_EXREG_CR0);
+		/*
+		 * When running with EPT but not unrestricted guest, KVM must
+		 * intercept CR3 accesses when paging is _disabled_.  This is
+		 * necessary because restricted guests can't actually run with
+		 * paging disabled, and so KVM stuffs its own CR3 in order to
+		 * run the guest when identity mapped page tables.
+		 *
+		 * Do _NOT_ check the old CR0.PG, e.g. to optimize away the
+		 * update, it may be stale with respect to CR3 interception,
+		 * e.g. after nested VM-Enter.
+		 *
+		 * Lastly, honor L1's desires, i.e. intercept CR3 loads and/or
+		 * stores to forward them to L1, even if KVM does not need to
+		 * intercept them to preserve its identity mapped page tables.
+		 */
+		if (!(cr0 & X86_CR0_PG)) {
+			exec_controls_setbit(vmx, CR3_EXITING_BITS);
+		} else if (!is_guest_mode(vcpu)) {
+			exec_controls_clearbit(vmx, CR3_EXITING_BITS);
+		} else {
+			tmp = exec_controls_get(vmx);
+			tmp &= ~CR3_EXITING_BITS;
+			tmp |= get_vmcs12(vcpu)->cpu_based_vm_exec_control & CR3_EXITING_BITS;
+			exec_controls_set(vmx, tmp);
+		}
+
+		/* Note, vmx_set_cr4() consumes the new vcpu->arch.cr0. */
+		if ((old_cr0_pg ^ cr0) & X86_CR0_PG)
+			vmx_set_cr4(vcpu, kvm_read_cr4(vcpu));
+	}
 
 	/* depends on vcpu->arch.cr0 to be set to a new value */
 	vmx->emulation_required = emulation_required(vcpu);
@@ -3271,7 +3289,7 @@ static u32 vmx_segment_access_rights(struct kvm_segment *var)
 	return ar;
 }
 
-void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg)
+void __vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 	const struct kvm_vmx_segment_field *sf = &kvm_vmx_segment_fields[seg];
@@ -3284,7 +3302,7 @@ void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg)
 			vmcs_write16(sf->selector, var->selector);
 		else if (var->s)
 			fix_rmode_seg(seg, &vmx->rmode.segs[seg]);
-		goto out;
+		return;
 	}
 
 	vmcs_writel(sf->base, var->base);
@@ -3306,9 +3324,13 @@ void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg)
 		var->type |= 0x1; /* Accessed */
 
 	vmcs_write32(sf->ar_bytes, vmx_segment_access_rights(var));
+}
 
-out:
-	vmx->emulation_required = emulation_required(vcpu);
+static void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg)
+{
+	__vmx_set_segment(vcpu, var, seg);
+
+	to_vmx(vcpu)->emulation_required = emulation_required(vcpu);
 }
 
 static void vmx_get_cs_db_l_bits(struct kvm_vcpu *vcpu, int *db, int *l)
@@ -3790,21 +3812,6 @@ void vmx_enable_intercept_for_msr(struct kvm_vcpu *vcpu, u32 msr, int type)
 		vmx_set_msr_bitmap_write(msr_bitmap, msr);
 }
 
-static u8 vmx_msr_bitmap_mode(struct kvm_vcpu *vcpu)
-{
-	u8 mode = 0;
-
-	if (cpu_has_secondary_exec_ctrls() &&
-	    (secondary_exec_controls_get(to_vmx(vcpu)) &
-	     SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE)) {
-		mode |= MSR_BITMAP_MODE_X2APIC;
-		if (enable_apicv && kvm_vcpu_apicv_active(vcpu))
-			mode |= MSR_BITMAP_MODE_X2APIC_APICV;
-	}
-
-	return mode;
-}
-
 static void vmx_reset_x2apic_msrs(struct kvm_vcpu *vcpu, u8 mode)
 {
 	unsigned long *msr_bitmap = to_vmx(vcpu)->vmcs01.msr_bitmap;
@@ -3822,11 +3829,29 @@ static void vmx_reset_x2apic_msrs(struct kvm_vcpu *vcpu, u8 mode)
 	}
 }
 
-static void vmx_update_msr_bitmap_x2apic(struct kvm_vcpu *vcpu, u8 mode)
+static void vmx_update_msr_bitmap_x2apic(struct kvm_vcpu *vcpu)
 {
+	struct vcpu_vmx *vmx = to_vmx(vcpu);
+	u8 mode;
+
 	if (!cpu_has_vmx_msr_bitmap())
 		return;
 
+	if (cpu_has_secondary_exec_ctrls() &&
+	    (secondary_exec_controls_get(vmx) &
+	     SECONDARY_EXEC_VIRTUALIZE_X2APIC_MODE)) {
+		mode = MSR_BITMAP_MODE_X2APIC;
+		if (enable_apicv && kvm_vcpu_apicv_active(vcpu))
+			mode |= MSR_BITMAP_MODE_X2APIC_APICV;
+	} else {
+		mode = 0;
+	}
+
+	if (mode == vmx->x2apic_msr_bitmap_mode)
+		return;
+
+	vmx->x2apic_msr_bitmap_mode = mode;
+
 	vmx_reset_x2apic_msrs(vcpu, mode);
 
 	/*
@@ -3843,21 +3868,6 @@ static void vmx_update_msr_bitmap_x2apic(struct kvm_vcpu *vcpu, u8 mode)
 	}
 }
 
-void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu)
-{
-	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	u8 mode = vmx_msr_bitmap_mode(vcpu);
-	u8 changed = mode ^ vmx->msr_bitmap_mode;
-
-	if (!changed)
-		return;
-
-	if (changed & (MSR_BITMAP_MODE_X2APIC | MSR_BITMAP_MODE_X2APIC_APICV))
-		vmx_update_msr_bitmap_x2apic(vcpu, mode);
-
-	vmx->msr_bitmap_mode = mode;
-}
-
 void pt_update_intercept_for_msr(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -3914,7 +3924,6 @@ static void vmx_msr_filter_changed(struct kvm_vcpu *vcpu)
 	}
 
 	pt_update_intercept_for_msr(vcpu);
-	vmx_update_msr_bitmap_x2apic(vcpu, vmx_msr_bitmap_mode(vcpu));
 }
 
 static inline bool kvm_vcpu_trigger_posted_interrupt(struct kvm_vcpu *vcpu,
@@ -4086,7 +4095,7 @@ void set_cr4_guest_host_mask(struct vcpu_vmx *vmx)
 	vmcs_writel(CR4_GUEST_HOST_MASK, ~vcpu->arch.cr4_guest_owned_bits);
 }
 
-u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx)
+static u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx)
 {
 	u32 pin_based_exec_ctrl = vmcs_config.pin_based_exec_ctrl;
 
@@ -4102,6 +4111,30 @@ u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx)
 	return pin_based_exec_ctrl;
 }
 
+static u32 vmx_vmentry_ctrl(void)
+{
+	u32 vmentry_ctrl = vmcs_config.vmentry_ctrl;
+
+	if (vmx_pt_mode_is_system())
+		vmentry_ctrl &= ~(VM_ENTRY_PT_CONCEAL_PIP |
+				  VM_ENTRY_LOAD_IA32_RTIT_CTL);
+	/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
+	return vmentry_ctrl &
+		~(VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | VM_ENTRY_LOAD_IA32_EFER);
+}
+
+static u32 vmx_vmexit_ctrl(void)
+{
+	u32 vmexit_ctrl = vmcs_config.vmexit_ctrl;
+
+	if (vmx_pt_mode_is_system())
+		vmexit_ctrl &= ~(VM_EXIT_PT_CONCEAL_PIP |
+				 VM_EXIT_CLEAR_IA32_RTIT_CTL);
+	/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
+	return vmexit_ctrl &
+		~(VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | VM_EXIT_LOAD_IA32_EFER);
+}
+
 static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
@@ -4118,11 +4151,10 @@ static void vmx_refresh_apicv_exec_ctrl(struct kvm_vcpu *vcpu)
 					SECONDARY_EXEC_VIRTUAL_INTR_DELIVERY);
 	}
 
-	if (cpu_has_vmx_msr_bitmap())
-		vmx_update_msr_bitmap(vcpu);
+	vmx_update_msr_bitmap_x2apic(vcpu);
 }
 
-u32 vmx_exec_control(struct vcpu_vmx *vmx)
+static u32 vmx_exec_control(struct vcpu_vmx *vmx)
 {
 	u32 exec_control = vmcs_config.cpu_based_exec_ctrl;
 
@@ -4204,7 +4236,7 @@ vmx_adjust_secondary_exec_control(struct vcpu_vmx *vmx, u32 *exec_control,
 #define vmx_adjust_sec_exec_exiting(vmx, exec_control, lname, uname) \
 	vmx_adjust_sec_exec_control(vmx, exec_control, lname, uname, uname##_EXITING, true)
 
-static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
+static u32 vmx_secondary_exec_control(struct vcpu_vmx *vmx)
 {
 	struct kvm_vcpu *vcpu = &vmx->vcpu;
 
@@ -4290,7 +4322,7 @@ static void vmx_compute_secondary_exec_control(struct vcpu_vmx *vmx)
 	if (!vcpu->kvm->arch.bus_lock_detection_enabled)
 		exec_control &= ~SECONDARY_EXEC_BUS_LOCK_DETECTION;
 
-	vmx->secondary_exec_control = exec_control;
+	return exec_control;
 }
 
 #define VMX_XSS_EXIT_BITMAP 0
@@ -4314,10 +4346,8 @@ static void init_vmcs(struct vcpu_vmx *vmx)
 
 	exec_controls_set(vmx, vmx_exec_control(vmx));
 
-	if (cpu_has_secondary_exec_ctrls()) {
-		vmx_compute_secondary_exec_control(vmx);
-		secondary_exec_controls_set(vmx, vmx->secondary_exec_control);
-	}
+	if (cpu_has_secondary_exec_ctrls())
+		secondary_exec_controls_set(vmx, vmx_secondary_exec_control(vmx));
 
 	if (kvm_vcpu_apicv_active(&vmx->vcpu)) {
 		vmcs_write64(EOI_EXIT_BITMAP0, 0);
@@ -4388,32 +4418,35 @@ static void init_vmcs(struct vcpu_vmx *vmx)
 		vmx->pt_desc.guest.output_mask = 0x7F;
 		vmcs_write64(GUEST_IA32_RTIT_CTL, 0);
 	}
+
+	vmcs_write32(GUEST_SYSENTER_CS, 0);
+	vmcs_writel(GUEST_SYSENTER_ESP, 0);
+	vmcs_writel(GUEST_SYSENTER_EIP, 0);
+	vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
+
+	if (cpu_has_vmx_tpr_shadow()) {
+		vmcs_write64(VIRTUAL_APIC_PAGE_ADDR, 0);
+		if (cpu_need_tpr_shadow(&vmx->vcpu))
+			vmcs_write64(VIRTUAL_APIC_PAGE_ADDR,
+				     __pa(vmx->vcpu.arch.apic->regs));
+		vmcs_write32(TPR_THRESHOLD, 0);
+	}
+
+	vmx_setup_uret_msrs(vmx);
 }
 
 static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
-	struct msr_data apic_base_msr;
-	u64 cr0;
 
 	vmx->rmode.vm86_active = 0;
 	vmx->spec_ctrl = 0;
 
 	vmx->msr_ia32_umwait_control = 0;
 
-	vmx->vcpu.arch.regs[VCPU_REGS_RDX] = get_rdx_init_val();
 	vmx->hv_deadline_tsc = -1;
 	kvm_set_cr8(vcpu, 0);
 
-	if (!init_event) {
-		apic_base_msr.data = APIC_DEFAULT_PHYS_BASE |
-				     MSR_IA32_APICBASE_ENABLE;
-		if (kvm_vcpu_is_reset_bsp(vcpu))
-			apic_base_msr.data |= MSR_IA32_APICBASE_BSP;
-		apic_base_msr.host_initiated = true;
-		kvm_set_apic_base(vcpu, &apic_base_msr);
-	}
-
 	vmx_segment_cache_clear(vmx);
 
 	seg_setup(VCPU_SREG_CS);
@@ -4436,16 +4469,6 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	vmcs_write32(GUEST_LDTR_LIMIT, 0xffff);
 	vmcs_write32(GUEST_LDTR_AR_BYTES, 0x00082);
 
-	if (!init_event) {
-		vmcs_write32(GUEST_SYSENTER_CS, 0);
-		vmcs_writel(GUEST_SYSENTER_ESP, 0);
-		vmcs_writel(GUEST_SYSENTER_EIP, 0);
-		vmcs_write64(GUEST_IA32_DEBUGCTL, 0);
-	}
-
-	kvm_set_rflags(vcpu, X86_EFLAGS_FIXED);
-	kvm_rip_write(vcpu, 0xfff0);
-
 	vmcs_writel(GUEST_GDTR_BASE, 0);
 	vmcs_write32(GUEST_GDTR_LIMIT, 0xffff);
 
@@ -4458,31 +4481,11 @@ static void vmx_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	if (kvm_mpx_supported())
 		vmcs_write64(GUEST_BNDCFGS, 0);
 
-	setup_msrs(vmx);
-
 	vmcs_write32(VM_ENTRY_INTR_INFO_FIELD, 0);  /* 22.2.1 */
 
-	if (cpu_has_vmx_tpr_shadow() && !init_event) {
-		vmcs_write64(VIRTUAL_APIC_PAGE_ADDR, 0);
-		if (cpu_need_tpr_shadow(vcpu))
-			vmcs_write64(VIRTUAL_APIC_PAGE_ADDR,
-				     __pa(vcpu->arch.apic->regs));
-		vmcs_write32(TPR_THRESHOLD, 0);
-	}
-
 	kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
 
-	cr0 = X86_CR0_NW | X86_CR0_CD | X86_CR0_ET;
-	vmx->vcpu.arch.cr0 = cr0;
-	vmx_set_cr0(vcpu, cr0); /* enter rmode */
-	vmx_set_cr4(vcpu, 0);
-	vmx_set_efer(vcpu, 0);
-
-	vmx_update_exception_bitmap(vcpu);
-
 	vpid_sync_context(vmx->vpid);
-	if (init_event)
-		vmx_clear_hlt(vcpu);
 }
 
 static void vmx_enable_irq_window(struct kvm_vcpu *vcpu)
@@ -4996,6 +4999,7 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 			return kvm_complete_insn_gp(vcpu, err);
 		case 3:
 			WARN_ON_ONCE(enable_unrestricted_guest);
+
 			err = kvm_set_cr3(vcpu, val);
 			return kvm_complete_insn_gp(vcpu, err);
 		case 4:
@@ -5021,14 +5025,13 @@ static int handle_cr(struct kvm_vcpu *vcpu)
 		}
 		break;
 	case 2: /* clts */
-		WARN_ONCE(1, "Guest should always own CR0.TS");
-		vmx_set_cr0(vcpu, kvm_read_cr0_bits(vcpu, ~X86_CR0_TS));
-		trace_kvm_cr_write(0, kvm_read_cr0(vcpu));
-		return kvm_skip_emulated_instruction(vcpu);
+		KVM_BUG(1, vcpu->kvm, "Guest always owns CR0.TS");
+		return -EIO;
 	case 1: /*mov from cr*/
 		switch (cr) {
 		case 3:
 			WARN_ON_ONCE(enable_unrestricted_guest);
+
 			val = kvm_read_cr3(vcpu);
 			kvm_register_write(vcpu, reg, val);
 			trace_kvm_cr_read(cr, val);
@@ -5129,6 +5132,12 @@ static void vmx_sync_dirty_debug_regs(struct kvm_vcpu *vcpu)
 
 	vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_WONT_EXIT;
 	exec_controls_setbit(to_vmx(vcpu), CPU_BASED_MOV_DR_EXITING);
+
+	/*
+	 * exc_debug expects dr6 to be cleared after it runs, avoid that it sees
+	 * a stale dr6 from the guest.
+	 */
+	set_debugreg(DR6_RESERVED, 6);
 }
 
 static void vmx_set_dr7(struct kvm_vcpu *vcpu, unsigned long val)
@@ -5338,7 +5347,9 @@ static int handle_ept_misconfig(struct kvm_vcpu *vcpu)
 
 static int handle_nmi_window(struct kvm_vcpu *vcpu)
 {
-	WARN_ON_ONCE(!enable_vnmi);
+	if (KVM_BUG_ON(!enable_vnmi, vcpu->kvm))
+		return -EIO;
+
 	exec_controls_clearbit(to_vmx(vcpu), CPU_BASED_NMI_WINDOW_EXITING);
 	++vcpu->stat.nmi_window_exits;
 	kvm_make_request(KVM_REQ_EVENT, vcpu);
@@ -5896,7 +5907,8 @@ static int __vmx_handle_exit(struct kvm_vcpu *vcpu, fastpath_t exit_fastpath)
 	 * below) should never happen as that means we incorrectly allowed a
 	 * nested VM-Enter with an invalid vmcs12.
 	 */
-	WARN_ON_ONCE(vmx->nested.nested_run_pending);
+	if (KVM_BUG_ON(vmx->nested.nested_run_pending, vcpu->kvm))
+		return -EIO;
 
 	/* If guest state is invalid, start emulating */
 	if (vmx->emulation_required)
@@ -6189,7 +6201,7 @@ void vmx_set_virtual_apic_mode(struct kvm_vcpu *vcpu)
 	}
 	secondary_exec_controls_set(vmx, sec_exec_control);
 
-	vmx_update_msr_bitmap(vcpu);
+	vmx_update_msr_bitmap_x2apic(vcpu);
 }
 
 static void vmx_set_apic_access_page_addr(struct kvm_vcpu *vcpu)
@@ -6274,7 +6286,9 @@ static int vmx_sync_pir_to_irr(struct kvm_vcpu *vcpu)
 	int max_irr;
 	bool max_irr_updated;
 
-	WARN_ON(!vcpu->arch.apicv_active);
+	if (KVM_BUG_ON(!vcpu->arch.apicv_active, vcpu->kvm))
+		return -EIO;
+
 	if (pi_test_on(&vmx->pi_desc)) {
 		pi_clear_on(&vmx->pi_desc);
 		/*
@@ -6357,7 +6371,7 @@ static void handle_external_interrupt_irqoff(struct kvm_vcpu *vcpu)
 	unsigned int vector = intr_info & INTR_INFO_VECTOR_MASK;
 	gate_desc *desc = (gate_desc *)host_idt_base + vector;
 
-	if (WARN_ONCE(!is_external_intr(intr_info),
+	if (KVM_BUG(!is_external_intr(intr_info), vcpu->kvm,
 	    "KVM: unexpected VM-Exit interrupt info: 0x%x", intr_info))
 		return;
 
@@ -6368,6 +6382,9 @@ static void vmx_handle_exit_irqoff(struct kvm_vcpu *vcpu)
 {
 	struct vcpu_vmx *vmx = to_vmx(vcpu);
 
+	if (vmx->emulation_required)
+		return;
+
 	if (vmx->exit_reason.basic == EXIT_REASON_EXTERNAL_INTERRUPT)
 		handle_external_interrupt_irqoff(vcpu);
 	else if (vmx->exit_reason.basic == EXIT_REASON_EXCEPTION_NMI)
@@ -6639,6 +6656,10 @@ static fastpath_t vmx_vcpu_run(struct kvm_vcpu *vcpu)
 		vmx->loaded_vmcs->host_state.cr4 = cr4;
 	}
 
+	/* When KVM_DEBUGREG_WONT_EXIT, dr6 is accessible in guest. */
+	if (unlikely(vcpu->arch.switch_db_regs & KVM_DEBUGREG_WONT_EXIT))
+		set_debugreg(vcpu->arch.dr6, 6);
+
 	/* When single-stepping over STI and MOV SS, we must clear the
 	 * corresponding interruptibility bits in the guest state. Otherwise
 	 * vmentry fails as it then expects bit 14 (BS) in pending debug
@@ -6838,7 +6859,6 @@ static int vmx_create_vcpu(struct kvm_vcpu *vcpu)
 		vmx_disable_intercept_for_msr(vcpu, MSR_CORE_C6_RESIDENCY, MSR_TYPE_R);
 		vmx_disable_intercept_for_msr(vcpu, MSR_CORE_C7_RESIDENCY, MSR_TYPE_R);
 	}
-	vmx->msr_bitmap_mode = 0;
 
 	vmx->loaded_vmcs = &vmx->vmcs01;
 	cpu = get_cpu();
@@ -6997,7 +7017,7 @@ exit:
 	return (cache << VMX_EPT_MT_EPTE_SHIFT) | ipat;
 }
 
-static void vmcs_set_secondary_exec_control(struct vcpu_vmx *vmx)
+static void vmcs_set_secondary_exec_control(struct vcpu_vmx *vmx, u32 new_ctl)
 {
 	/*
 	 * These bits in the secondary execution controls field
@@ -7011,7 +7031,6 @@ static void vmcs_set_secondary_exec_control(struct vcpu_vmx *vmx)
 		SECONDARY_EXEC_VIRTUALIZE_APIC_ACCESSES |
 		SECONDARY_EXEC_DESC;
 
-	u32 new_ctl = vmx->secondary_exec_control;
 	u32 cur_ctl = secondary_exec_controls_get(vmx);
 
 	secondary_exec_controls_set(vmx, (new_ctl & ~mask) | (cur_ctl & mask));
@@ -7154,10 +7173,11 @@ static void vmx_vcpu_after_set_cpuid(struct kvm_vcpu *vcpu)
 	/* xsaves_enabled is recomputed in vmx_compute_secondary_exec_control(). */
 	vcpu->arch.xsaves_enabled = false;
 
-	if (cpu_has_secondary_exec_ctrls()) {
-		vmx_compute_secondary_exec_control(vmx);
-		vmcs_set_secondary_exec_control(vmx);
-	}
+	vmx_setup_uret_msrs(vmx);
+
+	if (cpu_has_secondary_exec_ctrls())
+		vmcs_set_secondary_exec_control(vmx,
+						vmx_secondary_exec_control(vmx));
 
 	if (nested_vmx_allowed(vcpu))
 		to_vmx(vcpu)->msr_ia32_feature_control_valid_bits |=
@@ -7803,7 +7823,8 @@ static __init int hardware_setup(void)
 		ept_lpage_level = PG_LEVEL_2M;
 	else
 		ept_lpage_level = PG_LEVEL_4K;
-	kvm_configure_mmu(enable_ept, vmx_get_max_tdp_level(), ept_lpage_level);
+	kvm_configure_mmu(enable_ept, 0, vmx_get_max_tdp_level(),
+			  ept_lpage_level);
 
 	/*
 	 * Only enable PML when hardware supports PML feature, and both EPT
diff --git a/arch/x86/kvm/vmx/vmx.h b/arch/x86/kvm/vmx/vmx.h
index 17a1cb4b059d..4858c5fd95f2 100644
--- a/arch/x86/kvm/vmx/vmx.h
+++ b/arch/x86/kvm/vmx/vmx.h
@@ -227,7 +227,7 @@ struct nested_vmx {
 struct vcpu_vmx {
 	struct kvm_vcpu       vcpu;
 	u8                    fail;
-	u8		      msr_bitmap_mode;
+	u8		      x2apic_msr_bitmap_mode;
 
 	/*
 	 * If true, host state has been stored in vmx->loaded_vmcs for
@@ -263,8 +263,6 @@ struct vcpu_vmx {
 	u64		      spec_ctrl;
 	u32		      msr_ia32_umwait_control;
 
-	u32 secondary_exec_control;
-
 	/*
 	 * loaded_vmcs points to the VMCS currently used in this vcpu. For a
 	 * non-nested (L1) guest, it always points to vmcs01. For a nested
@@ -371,12 +369,11 @@ void vmx_set_cr4(struct kvm_vcpu *vcpu, unsigned long cr4);
 void set_cr4_guest_host_mask(struct vcpu_vmx *vmx);
 void ept_save_pdptrs(struct kvm_vcpu *vcpu);
 void vmx_get_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
-void vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
+void __vmx_set_segment(struct kvm_vcpu *vcpu, struct kvm_segment *var, int seg);
 u64 construct_eptp(struct kvm_vcpu *vcpu, hpa_t root_hpa, int root_level);
 
 bool vmx_guest_inject_ac(struct kvm_vcpu *vcpu);
 void vmx_update_exception_bitmap(struct kvm_vcpu *vcpu);
-void vmx_update_msr_bitmap(struct kvm_vcpu *vcpu);
 bool vmx_nmi_blocked(struct kvm_vcpu *vcpu);
 bool vmx_interrupt_blocked(struct kvm_vcpu *vcpu);
 bool vmx_get_nmi_mask(struct kvm_vcpu *vcpu);
@@ -419,9 +416,13 @@ static inline void lname##_controls_set(struct vcpu_vmx *vmx, u32 val)	    \
 		vmx->loaded_vmcs->controls_shadow.lname = val;		    \
 	}								    \
 }									    \
+static inline u32 __##lname##_controls_get(struct loaded_vmcs *vmcs)	    \
+{									    \
+	return vmcs->controls_shadow.lname;				    \
+}									    \
 static inline u32 lname##_controls_get(struct vcpu_vmx *vmx)		    \
 {									    \
-	return vmx->loaded_vmcs->controls_shadow.lname;			    \
+	return __##lname##_controls_get(vmx->loaded_vmcs);		    \
 }									    \
 static inline void lname##_controls_setbit(struct vcpu_vmx *vmx, u32 val)   \
 {									    \
@@ -451,31 +452,6 @@ static inline void vmx_register_cache_reset(struct kvm_vcpu *vcpu)
 	vcpu->arch.regs_dirty = 0;
 }
 
-static inline u32 vmx_vmentry_ctrl(void)
-{
-	u32 vmentry_ctrl = vmcs_config.vmentry_ctrl;
-	if (vmx_pt_mode_is_system())
-		vmentry_ctrl &= ~(VM_ENTRY_PT_CONCEAL_PIP |
-				  VM_ENTRY_LOAD_IA32_RTIT_CTL);
-	/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
-	return vmentry_ctrl &
-		~(VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL | VM_ENTRY_LOAD_IA32_EFER);
-}
-
-static inline u32 vmx_vmexit_ctrl(void)
-{
-	u32 vmexit_ctrl = vmcs_config.vmexit_ctrl;
-	if (vmx_pt_mode_is_system())
-		vmexit_ctrl &= ~(VM_EXIT_PT_CONCEAL_PIP |
-				 VM_EXIT_CLEAR_IA32_RTIT_CTL);
-	/* Loading of EFER and PERF_GLOBAL_CTRL are toggled dynamically */
-	return vmexit_ctrl &
-		~(VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL | VM_EXIT_LOAD_IA32_EFER);
-}
-
-u32 vmx_exec_control(struct vcpu_vmx *vmx);
-u32 vmx_pin_based_exec_ctrl(struct vcpu_vmx *vmx);
-
 static inline struct kvm_vmx *to_kvm_vmx(struct kvm *kvm)
 {
 	return container_of(kvm, struct kvm_vmx, kvm);
diff --git a/arch/x86/kvm/vmx/vmx_ops.h b/arch/x86/kvm/vmx/vmx_ops.h
index 164b64f65a8f..9e9ef47e988c 100644
--- a/arch/x86/kvm/vmx/vmx_ops.h
+++ b/arch/x86/kvm/vmx/vmx_ops.h
@@ -4,13 +4,11 @@
 
 #include <linux/nospec.h>
 
-#include <asm/kvm_host.h>
 #include <asm/vmx.h>
 
 #include "evmcs.h"
 #include "vmcs.h"
-
-#define __ex(x) __kvm_handle_fault_on_reboot(x)
+#include "x86.h"
 
 asmlinkage void vmread_error(unsigned long field, bool fault);
 __attribute__((regparm(0))) void vmread_error_trampoline(unsigned long field,
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index e5d5c5ed7dd4..28ef14155726 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -233,12 +233,13 @@ const struct _kvm_stats_desc kvm_vm_stats_desc[] = {
 	STATS_DESC_COUNTER(VM, mmu_recycled),
 	STATS_DESC_COUNTER(VM, mmu_cache_miss),
 	STATS_DESC_ICOUNTER(VM, mmu_unsync),
-	STATS_DESC_ICOUNTER(VM, lpages),
+	STATS_DESC_ICOUNTER(VM, pages_4k),
+	STATS_DESC_ICOUNTER(VM, pages_2m),
+	STATS_DESC_ICOUNTER(VM, pages_1g),
 	STATS_DESC_ICOUNTER(VM, nx_lpage_splits),
+	STATS_DESC_PCOUNTER(VM, max_mmu_rmap_size),
 	STATS_DESC_PCOUNTER(VM, max_mmu_page_hash_collisions)
 };
-static_assert(ARRAY_SIZE(kvm_vm_stats_desc) ==
-		sizeof(struct kvm_vm_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vm_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -278,8 +279,6 @@ const struct _kvm_stats_desc kvm_vcpu_stats_desc[] = {
 	STATS_DESC_COUNTER(VCPU, directed_yield_successful),
 	STATS_DESC_ICOUNTER(VCPU, guest_mode)
 };
-static_assert(ARRAY_SIZE(kvm_vcpu_stats_desc) ==
-		sizeof(struct kvm_vcpu_stat) / sizeof(u64));
 
 const struct kvm_stats_header kvm_vcpu_stats_header = {
 	.name_size = KVM_STATS_NAME_SIZE,
@@ -485,7 +484,14 @@ int kvm_set_apic_base(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 }
 EXPORT_SYMBOL_GPL(kvm_set_apic_base);
 
-asmlinkage __visible noinstr void kvm_spurious_fault(void)
+/*
+ * Handle a fault on a hardware virtualization (VMX or SVM) instruction.
+ *
+ * Hardware virtualization extension instructions may fault if a reboot turns
+ * off virtualization while processes are running.  Usually after catching the
+ * fault we just panic; during reboot instead the instruction is ignored.
+ */
+noinstr void kvm_spurious_fault(void)
 {
 	/* Fault while not rebooting.  We want the trace. */
 	BUG_ON(!kvm_rebooting);
@@ -1180,7 +1186,6 @@ static void kvm_update_dr0123(struct kvm_vcpu *vcpu)
 	if (!(vcpu->guest_debug & KVM_GUESTDBG_USE_HW_BP)) {
 		for (i = 0; i < KVM_NR_DB_REGS; i++)
 			vcpu->arch.eff_db[i] = vcpu->arch.db[i];
-		vcpu->arch.switch_db_regs |= KVM_DEBUGREG_RELOAD;
 	}
 }
 
@@ -3316,6 +3321,10 @@ int kvm_set_msr_common(struct kvm_vcpu *vcpu, struct msr_data *msr_info)
 			if (!msr_info->host_initiated) {
 				s64 adj = data - vcpu->arch.ia32_tsc_adjust_msr;
 				adjust_tsc_offset_guest(vcpu, adj);
+				/* Before back to guest, tsc_timestamp must be adjusted
+				 * as well, otherwise guest's percpu pvclock time could jump.
+				 */
+				kvm_make_request(KVM_REQ_CLOCK_UPDATE, vcpu);
 			}
 			vcpu->arch.ia32_tsc_adjust_msr = data;
 		}
@@ -4310,12 +4319,6 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 
 	static_call(kvm_x86_vcpu_put)(vcpu);
 	vcpu->arch.last_host_tsc = rdtsc();
-	/*
-	 * If userspace has set any breakpoints or watchpoints, dr6 is restored
-	 * on every vmexit, but if not, we might have a stale dr6 from the
-	 * guest. do_debug expects dr6 to be cleared after it runs, do the same.
-	 */
-	set_debugreg(0, 6);
 }
 
 static int kvm_vcpu_ioctl_get_lapic(struct kvm_vcpu *vcpu,
@@ -6567,9 +6570,9 @@ static int vcpu_mmio_gva_to_gpa(struct kvm_vcpu *vcpu, unsigned long gva,
 	 * there is no pkey in EPT page table for L1 guest or EPT
 	 * shadow page table for L2 guest.
 	 */
-	if (vcpu_match_mmio_gva(vcpu, gva)
-	    && !permission_fault(vcpu, vcpu->arch.walk_mmu,
-				 vcpu->arch.mmio_access, 0, access)) {
+	if (vcpu_match_mmio_gva(vcpu, gva) && (!is_paging(vcpu) ||
+	    !permission_fault(vcpu, vcpu->arch.walk_mmu,
+			      vcpu->arch.mmio_access, 0, access))) {
 		*gpa = vcpu->arch.mmio_gfn << PAGE_SHIFT |
 					(gva & (PAGE_SIZE - 1));
 		trace_vcpu_match_mmio(gva, *gpa, write, false);
@@ -8578,6 +8581,8 @@ EXPORT_SYMBOL_GPL(kvm_apicv_activated);
 
 static void kvm_apicv_init(struct kvm *kvm)
 {
+	mutex_init(&kvm->arch.apicv_update_lock);
+
 	if (enable_apicv)
 		clear_bit(APICV_INHIBIT_REASON_DISABLE,
 			  &kvm->arch.apicv_inhibit_reasons);
@@ -8891,6 +8896,10 @@ static int inject_pending_event(struct kvm_vcpu *vcpu, bool *req_immediate_exit)
 		can_inject = false;
 	}
 
+	/* Don't inject interrupts if the user asked to avoid doing so */
+	if (vcpu->guest_debug & KVM_GUESTDBG_BLOCKIRQ)
+		return 0;
+
 	/*
 	 * Finally, inject interrupt events.  If an event cannot be injected
 	 * due to architectural conditions (e.g. IF=0) a window-open exit
@@ -9236,10 +9245,18 @@ void kvm_make_scan_ioapic_request(struct kvm *kvm)
 
 void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu)
 {
+	bool activate;
+
 	if (!lapic_in_kernel(vcpu))
 		return;
 
-	vcpu->arch.apicv_active = kvm_apicv_activated(vcpu->kvm);
+	mutex_lock(&vcpu->kvm->arch.apicv_update_lock);
+
+	activate = kvm_apicv_activated(vcpu->kvm);
+	if (vcpu->arch.apicv_active == activate)
+		goto out;
+
+	vcpu->arch.apicv_active = activate;
 	kvm_apic_update_apicv(vcpu);
 	static_call(kvm_x86_refresh_apicv_exec_ctrl)(vcpu);
 
@@ -9251,54 +9268,45 @@ void kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu)
 	 */
 	if (!vcpu->arch.apicv_active)
 		kvm_make_request(KVM_REQ_EVENT, vcpu);
+
+out:
+	mutex_unlock(&vcpu->kvm->arch.apicv_update_lock);
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_update_apicv);
 
-/*
- * NOTE: Do not hold any lock prior to calling this.
- *
- * In particular, kvm_request_apicv_update() expects kvm->srcu not to be
- * locked, because it calls __x86_set_memory_region() which does
- * synchronize_srcu(&kvm->srcu).
- */
-void kvm_request_apicv_update(struct kvm *kvm, bool activate, ulong bit)
+void __kvm_request_apicv_update(struct kvm *kvm, bool activate, ulong bit)
 {
-	struct kvm_vcpu *except;
-	unsigned long old, new, expected;
+	unsigned long old, new;
 
 	if (!kvm_x86_ops.check_apicv_inhibit_reasons ||
 	    !static_call(kvm_x86_check_apicv_inhibit_reasons)(bit))
 		return;
 
-	old = READ_ONCE(kvm->arch.apicv_inhibit_reasons);
-	do {
-		expected = new = old;
-		if (activate)
-			__clear_bit(bit, &new);
-		else
-			__set_bit(bit, &new);
-		if (new == old)
-			break;
-		old = cmpxchg(&kvm->arch.apicv_inhibit_reasons, expected, new);
-	} while (old != expected);
-
-	if (!!old == !!new)
-		return;
+	old = new = kvm->arch.apicv_inhibit_reasons;
 
-	trace_kvm_apicv_update_request(activate, bit);
-	if (kvm_x86_ops.pre_update_apicv_exec_ctrl)
-		static_call(kvm_x86_pre_update_apicv_exec_ctrl)(kvm, activate);
+	if (activate)
+		__clear_bit(bit, &new);
+	else
+		__set_bit(bit, &new);
+
+	if (!!old != !!new) {
+		trace_kvm_apicv_update_request(activate, bit);
+		kvm_make_all_cpus_request(kvm, KVM_REQ_APICV_UPDATE);
+		kvm->arch.apicv_inhibit_reasons = new;
+		if (new) {
+			unsigned long gfn = gpa_to_gfn(APIC_DEFAULT_PHYS_BASE);
+			kvm_zap_gfn_range(kvm, gfn, gfn+1);
+		}
+	} else
+		kvm->arch.apicv_inhibit_reasons = new;
+}
+EXPORT_SYMBOL_GPL(__kvm_request_apicv_update);
 
-	/*
-	 * Sending request to update APICV for all other vcpus,
-	 * while update the calling vcpu immediately instead of
-	 * waiting for another #VMEXIT to handle the request.
-	 */
-	except = kvm_get_running_vcpu();
-	kvm_make_all_cpus_request_except(kvm, KVM_REQ_APICV_UPDATE,
-					 except);
-	if (except)
-		kvm_vcpu_update_apicv(except);
+void kvm_request_apicv_update(struct kvm *kvm, bool activate, ulong bit)
+{
+	mutex_lock(&kvm->arch.apicv_update_lock);
+	__kvm_request_apicv_update(kvm, activate, bit);
+	mutex_unlock(&kvm->arch.apicv_update_lock);
 }
 EXPORT_SYMBOL_GPL(kvm_request_apicv_update);
 
@@ -9395,6 +9403,10 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 	}
 
 	if (kvm_request_pending(vcpu)) {
+		if (kvm_check_request(KVM_REQ_VM_BUGGED, vcpu)) {
+			r = -EIO;
+			goto out;
+		}
 		if (kvm_check_request(KVM_REQ_GET_NESTED_STATE_PAGES, vcpu)) {
 			if (unlikely(!kvm_x86_ops.nested_ops->get_nested_state_pages(vcpu))) {
 				r = 0;
@@ -9608,8 +9620,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		set_debugreg(vcpu->arch.eff_db[1], 1);
 		set_debugreg(vcpu->arch.eff_db[2], 2);
 		set_debugreg(vcpu->arch.eff_db[3], 3);
-		set_debugreg(vcpu->arch.dr6, 6);
-		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	} else if (unlikely(hw_breakpoint_active())) {
 		set_debugreg(0, 7);
 	}
@@ -9639,7 +9649,6 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		static_call(kvm_x86_sync_dirty_debug_regs)(vcpu);
 		kvm_update_dr0123(vcpu);
 		kvm_update_dr7(vcpu);
-		vcpu->arch.switch_db_regs &= ~KVM_DEBUGREG_RELOAD;
 	}
 
 	/*
@@ -9976,7 +9985,8 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu)
 		goto out;
 	}
 
-	if (kvm_run->kvm_valid_regs & ~KVM_SYNC_X86_VALID_FIELDS) {
+	if ((kvm_run->kvm_valid_regs & ~KVM_SYNC_X86_VALID_FIELDS) ||
+	    (kvm_run->kvm_dirty_regs & ~KVM_SYNC_X86_VALID_FIELDS)) {
 		r = -EINVAL;
 		goto out;
 	}
@@ -10581,9 +10591,6 @@ static void store_regs(struct kvm_vcpu *vcpu)
 
 static int sync_regs(struct kvm_vcpu *vcpu)
 {
-	if (vcpu->run->kvm_dirty_regs & ~KVM_SYNC_X86_VALID_FIELDS)
-		return -EINVAL;
-
 	if (vcpu->run->kvm_dirty_regs & KVM_SYNC_X86_REGS) {
 		__set_regs(vcpu, &vcpu->run->s.regs.regs);
 		vcpu->run->kvm_dirty_regs &= ~KVM_SYNC_X86_REGS;
@@ -10799,6 +10806,8 @@ void kvm_arch_vcpu_destroy(struct kvm_vcpu *vcpu)
 void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 {
 	unsigned long old_cr0 = kvm_read_cr0(vcpu);
+	unsigned long new_cr0;
+	u32 eax, dummy;
 
 	kvm_lapic_reset(vcpu, init_event);
 
@@ -10865,10 +10874,41 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	vcpu->arch.regs_avail = ~0;
 	vcpu->arch.regs_dirty = ~0;
 
+	/*
+	 * Fall back to KVM's default Family/Model/Stepping of 0x600 (P6/Athlon)
+	 * if no CPUID match is found.  Note, it's impossible to get a match at
+	 * RESET since KVM emulates RESET before exposing the vCPU to userspace,
+	 * i.e. it'simpossible for kvm_cpuid() to find a valid entry on RESET.
+	 * But, go through the motions in case that's ever remedied.
+	 */
+	eax = 1;
+	if (!kvm_cpuid(vcpu, &eax, &dummy, &dummy, &dummy, true))
+		eax = 0x600;
+	kvm_rdx_write(vcpu, eax);
+
 	vcpu->arch.ia32_xss = 0;
 
 	static_call(kvm_x86_vcpu_reset)(vcpu, init_event);
 
+	kvm_set_rflags(vcpu, X86_EFLAGS_FIXED);
+	kvm_rip_write(vcpu, 0xfff0);
+
+	/*
+	 * CR0.CD/NW are set on RESET, preserved on INIT.  Note, some versions
+	 * of Intel's SDM list CD/NW as being set on INIT, but they contradict
+	 * (or qualify) that with a footnote stating that CD/NW are preserved.
+	 */
+	new_cr0 = X86_CR0_ET;
+	if (init_event)
+		new_cr0 |= (old_cr0 & (X86_CR0_NW | X86_CR0_CD));
+	else
+		new_cr0 |= X86_CR0_NW | X86_CR0_CD;
+
+	static_call(kvm_x86_set_cr0)(vcpu, new_cr0);
+	static_call(kvm_x86_set_cr4)(vcpu, 0);
+	static_call(kvm_x86_set_efer)(vcpu, 0);
+	static_call(kvm_x86_update_exception_bitmap)(vcpu);
+
 	/*
 	 * Reset the MMU context if paging was enabled prior to INIT (which is
 	 * implied if CR0.PG=1 as CR0 will be '0' prior to RESET).  Unlike the
@@ -10879,7 +10919,20 @@ void kvm_vcpu_reset(struct kvm_vcpu *vcpu, bool init_event)
 	 */
 	if (old_cr0 & X86_CR0_PG)
 		kvm_mmu_reset_context(vcpu);
+
+	/*
+	 * Intel's SDM states that all TLB entries are flushed on INIT.  AMD's
+	 * APM states the TLBs are untouched by INIT, but it also states that
+	 * the TLBs are flushed on "External initialization of the processor."
+	 * Flush the guest TLB regardless of vendor, there is no meaningful
+	 * benefit in relying on the guest to flush the TLB immediately after
+	 * INIT.  A spurious TLB flush is benign and likely negligible from a
+	 * performance perspective.
+	 */
+	if (init_event)
+		kvm_make_request(KVM_REQ_TLB_FLUSH_GUEST, vcpu);
 }
+EXPORT_SYMBOL_GPL(kvm_vcpu_reset);
 
 void kvm_vcpu_deliver_sipi_vector(struct kvm_vcpu *vcpu, u8 vector)
 {
@@ -11123,6 +11176,7 @@ int kvm_arch_init_vm(struct kvm *kvm, unsigned long type)
 	kvm_hv_init_vm(kvm);
 	kvm_page_track_init(kvm);
 	kvm_mmu_init_vm(kvm);
+	kvm_xen_init_vm(kvm);
 
 	return static_call(kvm_x86_vm_init)(kvm);
 }
@@ -11312,8 +11366,7 @@ static int memslot_rmap_alloc(struct kvm_memory_slot *slot,
 
 	for (i = 0; i < KVM_NR_PAGE_SIZES; ++i) {
 		int level = i + 1;
-		int lpages = gfn_to_index(slot->base_gfn + npages - 1,
-					  slot->base_gfn, level) + 1;
+		int lpages = __kvm_mmu_slot_lpages(slot, npages, level);
 
 		WARN_ON(slot->arch.rmap[i]);
 
@@ -11396,8 +11449,7 @@ static int kvm_alloc_memslot_metadata(struct kvm *kvm,
 		int lpages;
 		int level = i + 1;
 
-		lpages = gfn_to_index(slot->base_gfn + npages - 1,
-				      slot->base_gfn, level) + 1;
+		lpages = __kvm_mmu_slot_lpages(slot, npages, level);
 
 		linfo = kvcalloc(lpages, sizeof(*linfo), GFP_KERNEL_ACCOUNT);
 		if (!linfo)
@@ -11481,7 +11533,7 @@ static void kvm_mmu_update_cpu_dirty_logging(struct kvm *kvm, bool enable)
 
 static void kvm_mmu_slot_apply_flags(struct kvm *kvm,
 				     struct kvm_memory_slot *old,
-				     struct kvm_memory_slot *new,
+				     const struct kvm_memory_slot *new,
 				     enum kvm_mr_change change)
 {
 	bool log_dirty_pages = new->flags & KVM_MEM_LOG_DIRTY_PAGES;
@@ -11561,10 +11613,7 @@ void kvm_arch_commit_memory_region(struct kvm *kvm,
 		kvm_mmu_change_mmu_pages(kvm,
 				kvm_mmu_calculate_default_mmu_pages(kvm));
 
-	/*
-	 * FIXME: const-ify all uses of struct kvm_memory_slot.
-	 */
-	kvm_mmu_slot_apply_flags(kvm, old, (struct kvm_memory_slot *) new, change);
+	kvm_mmu_slot_apply_flags(kvm, old, new, change);
 
 	/* Free the arrays associated with the old memslot. */
 	if (change == KVM_MR_MOVE)
diff --git a/arch/x86/kvm/x86.h b/arch/x86/kvm/x86.h
index 44ae10312740..7d66d63dc55a 100644
--- a/arch/x86/kvm/x86.h
+++ b/arch/x86/kvm/x86.h
@@ -8,6 +8,8 @@
 #include "kvm_cache_regs.h"
 #include "kvm_emulate.h"
 
+void kvm_spurious_fault(void);
+
 static __always_inline void kvm_guest_enter_irqoff(void)
 {
 	/*
diff --git a/arch/x86/kvm/xen.c b/arch/x86/kvm/xen.c
index ae17250e1efe..9ea9c3dabe37 100644
--- a/arch/x86/kvm/xen.c
+++ b/arch/x86/kvm/xen.c
@@ -25,15 +25,14 @@ static int kvm_xen_shared_info_init(struct kvm *kvm, gfn_t gfn)
 {
 	gpa_t gpa = gfn_to_gpa(gfn);
 	int wc_ofs, sec_hi_ofs;
-	int ret;
+	int ret = 0;
 	int idx = srcu_read_lock(&kvm->srcu);
 
-	ret = kvm_gfn_to_hva_cache_init(kvm, &kvm->arch.xen.shinfo_cache,
-					gpa, PAGE_SIZE);
-	if (ret)
+	if (kvm_is_error_hva(gfn_to_hva(kvm, gfn))) {
+		ret = -EFAULT;
 		goto out;
-
-	kvm->arch.xen.shinfo_set = true;
+	}
+	kvm->arch.xen.shinfo_gfn = gfn;
 
 	/* Paranoia checks on the 32-bit struct layout */
 	BUILD_BUG_ON(offsetof(struct compat_shared_info, wc) != 0x900);
@@ -245,7 +244,7 @@ int kvm_xen_hvm_set_attr(struct kvm *kvm, struct kvm_xen_hvm_attr *data)
 
 	case KVM_XEN_ATTR_TYPE_SHARED_INFO:
 		if (data->u.shared_info.gfn == GPA_INVALID) {
-			kvm->arch.xen.shinfo_set = false;
+			kvm->arch.xen.shinfo_gfn = GPA_INVALID;
 			r = 0;
 			break;
 		}
@@ -283,10 +282,7 @@ int kvm_xen_hvm_get_attr(struct kvm *kvm, struct kvm_xen_hvm_attr *data)
 		break;
 
 	case KVM_XEN_ATTR_TYPE_SHARED_INFO:
-		if (kvm->arch.xen.shinfo_set)
-			data->u.shared_info.gfn = gpa_to_gfn(kvm->arch.xen.shinfo_cache.gpa);
-		else
-			data->u.shared_info.gfn = GPA_INVALID;
+		data->u.shared_info.gfn = gpa_to_gfn(kvm->arch.xen.shinfo_gfn);
 		r = 0;
 		break;
 
@@ -646,6 +642,11 @@ int kvm_xen_hvm_config(struct kvm *kvm, struct kvm_xen_hvm_config *xhc)
 	return 0;
 }
 
+void kvm_xen_init_vm(struct kvm *kvm)
+{
+	kvm->arch.xen.shinfo_gfn = GPA_INVALID;
+}
+
 void kvm_xen_destroy_vm(struct kvm *kvm)
 {
 	if (kvm->arch.xen_hvm_config.msr)
diff --git a/arch/x86/kvm/xen.h b/arch/x86/kvm/xen.h
index 463a7844a8ca..cc0cf5f37450 100644
--- a/arch/x86/kvm/xen.h
+++ b/arch/x86/kvm/xen.h
@@ -21,6 +21,7 @@ int kvm_xen_hvm_set_attr(struct kvm *kvm, struct kvm_xen_hvm_attr *data);
 int kvm_xen_hvm_get_attr(struct kvm *kvm, struct kvm_xen_hvm_attr *data);
 int kvm_xen_write_hypercall_page(struct kvm_vcpu *vcpu, u64 data);
 int kvm_xen_hvm_config(struct kvm *kvm, struct kvm_xen_hvm_config *xhc);
+void kvm_xen_init_vm(struct kvm *kvm);
 void kvm_xen_destroy_vm(struct kvm *kvm);
 
 static inline bool kvm_xen_msr_enabled(struct kvm *kvm)
@@ -50,6 +51,10 @@ static inline int kvm_xen_write_hypercall_page(struct kvm_vcpu *vcpu, u64 data)
 	return 1;
 }
 
+static inline void kvm_xen_init_vm(struct kvm *kvm)
+{
+}
+
 static inline void kvm_xen_destroy_vm(struct kvm *kvm)
 {
 }
diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c
index 74b78840182d..bd90b8fe81e4 100644
--- a/arch/x86/mm/init_32.c
+++ b/arch/x86/mm/init_32.c
@@ -801,8 +801,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 	return __add_pages(nid, start_pfn, nr_pages, params);
 }
 
-void arch_remove_memory(int nid, u64 start, u64 size,
-			struct vmem_altmap *altmap)
+void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index ddeaba947eb3..a6e11763763f 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -1255,8 +1255,7 @@ kernel_physical_mapping_remove(unsigned long start, unsigned long end)
 	remove_pagetable(start, end, true, NULL);
 }
 
-void __ref arch_remove_memory(int nid, u64 start, u64 size,
-			      struct vmem_altmap *altmap)
+void __ref arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap)
 {
 	unsigned long start_pfn = start >> PAGE_SHIFT;
 	unsigned long nr_pages = size >> PAGE_SHIFT;
diff --git a/arch/x86/pci/numachip.c b/arch/x86/pci/numachip.c
index 01a085d9135a..4f0147d4e225 100644
--- a/arch/x86/pci/numachip.c
+++ b/arch/x86/pci/numachip.c
@@ -12,6 +12,7 @@
 
 #include <linux/pci.h>
 #include <asm/pci_x86.h>
+#include <asm/numachip/numachip.h>
 
 static u8 limit __read_mostly;
 
diff --git a/arch/x86/pci/sta2x11-fixup.c b/arch/x86/pci/sta2x11-fixup.c
index 7d2525691854..101081ad64b6 100644
--- a/arch/x86/pci/sta2x11-fixup.c
+++ b/arch/x86/pci/sta2x11-fixup.c
@@ -146,8 +146,7 @@ static void sta2x11_map_ep(struct pci_dev *pdev)
 		dev_err(dev, "sta2x11: could not set DMA offset\n");
 
 	dev->bus_dma_limit = max_amba_addr;
-	pci_set_consistent_dma_mask(pdev, max_amba_addr);
-	pci_set_dma_mask(pdev, max_amba_addr);
+	dma_set_mask_and_coherent(&pdev->dev, max_amba_addr);
 
 	/* Configure AHB mapping */
 	pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
diff --git a/arch/x86/um/shared/sysdep/stub_32.h b/arch/x86/um/shared/sysdep/stub_32.h
index b95db9daf0e8..4c6c2be0c899 100644
--- a/arch/x86/um/shared/sysdep/stub_32.h
+++ b/arch/x86/um/shared/sysdep/stub_32.h
@@ -101,4 +101,16 @@ static inline void remap_stack_and_trap(void)
 		"memory");
 }
 
+static __always_inline void *get_stub_page(void)
+{
+	unsigned long ret;
+
+	asm volatile (
+		"movl %%esp,%0 ;"
+		"andl %1,%0"
+		: "=a" (ret)
+		: "g" (~(UM_KERN_PAGE_SIZE - 1)));
+
+	return (void *)ret;
+}
 #endif
diff --git a/arch/x86/um/shared/sysdep/stub_64.h b/arch/x86/um/shared/sysdep/stub_64.h
index 6e2626b77a2e..e9c4b2b38803 100644
--- a/arch/x86/um/shared/sysdep/stub_64.h
+++ b/arch/x86/um/shared/sysdep/stub_64.h
@@ -108,4 +108,16 @@ static inline void remap_stack_and_trap(void)
 		__syscall_clobber, "r10", "r8", "r9");
 }
 
+static __always_inline void *get_stub_page(void)
+{
+	unsigned long ret;
+
+	asm volatile (
+		"movq %%rsp,%0 ;"
+		"andq %1,%0"
+		: "=a" (ret)
+		: "g" (~(UM_KERN_PAGE_SIZE - 1)));
+
+	return (void *)ret;
+}
 #endif
diff --git a/arch/x86/um/stub_segv.c b/arch/x86/um/stub_segv.c
index 21836eaf1725..f7eefba034f9 100644
--- a/arch/x86/um/stub_segv.c
+++ b/arch/x86/um/stub_segv.c
@@ -11,9 +11,8 @@
 void __attribute__ ((__section__ (".__syscall_stub")))
 stub_segv_handler(int sig, siginfo_t *info, void *p)
 {
-	int stack;
+	struct faultinfo *f = get_stub_page();
 	ucontext_t *uc = p;
-	struct faultinfo *f = (void *)(((unsigned long)&stack) & ~(UM_KERN_PAGE_SIZE - 1));
 
 	GET_FAULTINFO_FROM_MC(*f, &uc->uc_mcontext);
 	trap_myself();
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index 9bf2a9bc8539..0e56bad058fa 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -42,6 +42,7 @@ config XTENSA
 	select MODULES_USE_ELF_RELA
 	select PERF_USE_VMALLOC
 	select SET_FS
+	select TRACE_IRQFLAGS_SUPPORT
 	select VIRT_TO_BUS
 	help
 	  Xtensa processors are 32-bit RISC machines designed by Tensilica
@@ -73,9 +74,6 @@ config LOCKDEP_SUPPORT
 config STACKTRACE_SUPPORT
 	def_bool y
 
-config TRACE_IRQFLAGS_SUPPORT
-	def_bool y
-
 config MMU
 	def_bool n
 
diff --git a/block/Makefile b/block/Makefile
index 6cf40276d3cf..41aa1ba69c90 100644
--- a/block/Makefile
+++ b/block/Makefile
@@ -3,7 +3,7 @@
 # Makefile for the kernel block layer
 #
 
-obj-$(CONFIG_BLOCK) := bio.o elevator.o blk-core.o blk-sysfs.o \
+obj-$(CONFIG_BLOCK) := bdev.o fops.o bio.o elevator.o blk-core.o blk-sysfs.o \
 			blk-flush.o blk-settings.o blk-ioc.o blk-map.o \
 			blk-exec.o blk-merge.o blk-timeout.o \
 			blk-lib.o blk-mq.o blk-mq-tag.o blk-stat.o \
diff --git a/fs/block_dev.c b/block/bdev.c
index 45df6cbccf12..cf2780cb44a7 100644
--- a/fs/block_dev.c
+++ b/block/bdev.c
@@ -7,12 +7,10 @@
 
 #include <linux/init.h>
 #include <linux/mm.h>
-#include <linux/fcntl.h>
 #include <linux/slab.h>
 #include <linux/kmod.h>
 #include <linux/major.h>
 #include <linux/device_cgroup.h>
-#include <linux/highmem.h>
 #include <linux/blkdev.h>
 #include <linux/backing-dev.h>
 #include <linux/module.h>
@@ -20,30 +18,22 @@
 #include <linux/magic.h>
 #include <linux/buffer_head.h>
 #include <linux/swap.h>
-#include <linux/pagevec.h>
 #include <linux/writeback.h>
-#include <linux/mpage.h>
 #include <linux/mount.h>
 #include <linux/pseudo_fs.h>
 #include <linux/uio.h>
 #include <linux/namei.h>
-#include <linux/log2.h>
 #include <linux/cleancache.h>
-#include <linux/task_io_accounting_ops.h>
-#include <linux/falloc.h>
 #include <linux/part_stat.h>
 #include <linux/uaccess.h>
-#include <linux/suspend.h>
-#include "internal.h"
-#include "../block/blk.h"
+#include "../fs/internal.h"
+#include "blk.h"
 
 struct bdev_inode {
 	struct block_device bdev;
 	struct inode vfs_inode;
 };
 
-static const struct address_space_operations def_blk_aops;
-
 static inline struct bdev_inode *BDEV_I(struct inode *inode)
 {
 	return container_of(inode, struct bdev_inode, vfs_inode);
@@ -194,332 +184,6 @@ int sb_min_blocksize(struct super_block *sb, int size)
 
 EXPORT_SYMBOL(sb_min_blocksize);
 
-static int
-blkdev_get_block(struct inode *inode, sector_t iblock,
-		struct buffer_head *bh, int create)
-{
-	bh->b_bdev = I_BDEV(inode);
-	bh->b_blocknr = iblock;
-	set_buffer_mapped(bh);
-	return 0;
-}
-
-static struct inode *bdev_file_inode(struct file *file)
-{
-	return file->f_mapping->host;
-}
-
-static unsigned int dio_bio_write_op(struct kiocb *iocb)
-{
-	unsigned int op = REQ_OP_WRITE | REQ_SYNC | REQ_IDLE;
-
-	/* avoid the need for a I/O completion work item */
-	if (iocb->ki_flags & IOCB_DSYNC)
-		op |= REQ_FUA;
-	return op;
-}
-
-#define DIO_INLINE_BIO_VECS 4
-
-static void blkdev_bio_end_io_simple(struct bio *bio)
-{
-	struct task_struct *waiter = bio->bi_private;
-
-	WRITE_ONCE(bio->bi_private, NULL);
-	blk_wake_io_task(waiter);
-}
-
-static ssize_t
-__blkdev_direct_IO_simple(struct kiocb *iocb, struct iov_iter *iter,
-		unsigned int nr_pages)
-{
-	struct file *file = iocb->ki_filp;
-	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
-	struct bio_vec inline_vecs[DIO_INLINE_BIO_VECS], *vecs;
-	loff_t pos = iocb->ki_pos;
-	bool should_dirty = false;
-	struct bio bio;
-	ssize_t ret;
-	blk_qc_t qc;
-
-	if ((pos | iov_iter_alignment(iter)) &
-	    (bdev_logical_block_size(bdev) - 1))
-		return -EINVAL;
-
-	if (nr_pages <= DIO_INLINE_BIO_VECS)
-		vecs = inline_vecs;
-	else {
-		vecs = kmalloc_array(nr_pages, sizeof(struct bio_vec),
-				     GFP_KERNEL);
-		if (!vecs)
-			return -ENOMEM;
-	}
-
-	bio_init(&bio, vecs, nr_pages);
-	bio_set_dev(&bio, bdev);
-	bio.bi_iter.bi_sector = pos >> 9;
-	bio.bi_write_hint = iocb->ki_hint;
-	bio.bi_private = current;
-	bio.bi_end_io = blkdev_bio_end_io_simple;
-	bio.bi_ioprio = iocb->ki_ioprio;
-
-	ret = bio_iov_iter_get_pages(&bio, iter);
-	if (unlikely(ret))
-		goto out;
-	ret = bio.bi_iter.bi_size;
-
-	if (iov_iter_rw(iter) == READ) {
-		bio.bi_opf = REQ_OP_READ;
-		if (iter_is_iovec(iter))
-			should_dirty = true;
-	} else {
-		bio.bi_opf = dio_bio_write_op(iocb);
-		task_io_account_write(ret);
-	}
-	if (iocb->ki_flags & IOCB_NOWAIT)
-		bio.bi_opf |= REQ_NOWAIT;
-	if (iocb->ki_flags & IOCB_HIPRI)
-		bio_set_polled(&bio, iocb);
-
-	qc = submit_bio(&bio);
-	for (;;) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		if (!READ_ONCE(bio.bi_private))
-			break;
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc, true))
-			blk_io_schedule();
-	}
-	__set_current_state(TASK_RUNNING);
-
-	bio_release_pages(&bio, should_dirty);
-	if (unlikely(bio.bi_status))
-		ret = blk_status_to_errno(bio.bi_status);
-
-out:
-	if (vecs != inline_vecs)
-		kfree(vecs);
-
-	bio_uninit(&bio);
-
-	return ret;
-}
-
-struct blkdev_dio {
-	union {
-		struct kiocb		*iocb;
-		struct task_struct	*waiter;
-	};
-	size_t			size;
-	atomic_t		ref;
-	bool			multi_bio : 1;
-	bool			should_dirty : 1;
-	bool			is_sync : 1;
-	struct bio		bio;
-};
-
-static struct bio_set blkdev_dio_pool;
-
-static int blkdev_iopoll(struct kiocb *kiocb, bool wait)
-{
-	struct block_device *bdev = I_BDEV(kiocb->ki_filp->f_mapping->host);
-	struct request_queue *q = bdev_get_queue(bdev);
-
-	return blk_poll(q, READ_ONCE(kiocb->ki_cookie), wait);
-}
-
-static void blkdev_bio_end_io(struct bio *bio)
-{
-	struct blkdev_dio *dio = bio->bi_private;
-	bool should_dirty = dio->should_dirty;
-
-	if (bio->bi_status && !dio->bio.bi_status)
-		dio->bio.bi_status = bio->bi_status;
-
-	if (!dio->multi_bio || atomic_dec_and_test(&dio->ref)) {
-		if (!dio->is_sync) {
-			struct kiocb *iocb = dio->iocb;
-			ssize_t ret;
-
-			if (likely(!dio->bio.bi_status)) {
-				ret = dio->size;
-				iocb->ki_pos += ret;
-			} else {
-				ret = blk_status_to_errno(dio->bio.bi_status);
-			}
-
-			dio->iocb->ki_complete(iocb, ret, 0);
-			if (dio->multi_bio)
-				bio_put(&dio->bio);
-		} else {
-			struct task_struct *waiter = dio->waiter;
-
-			WRITE_ONCE(dio->waiter, NULL);
-			blk_wake_io_task(waiter);
-		}
-	}
-
-	if (should_dirty) {
-		bio_check_pages_dirty(bio);
-	} else {
-		bio_release_pages(bio, false);
-		bio_put(bio);
-	}
-}
-
-static ssize_t __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
-		unsigned int nr_pages)
-{
-	struct file *file = iocb->ki_filp;
-	struct inode *inode = bdev_file_inode(file);
-	struct block_device *bdev = I_BDEV(inode);
-	struct blk_plug plug;
-	struct blkdev_dio *dio;
-	struct bio *bio;
-	bool is_poll = (iocb->ki_flags & IOCB_HIPRI) != 0;
-	bool is_read = (iov_iter_rw(iter) == READ), is_sync;
-	loff_t pos = iocb->ki_pos;
-	blk_qc_t qc = BLK_QC_T_NONE;
-	int ret = 0;
-
-	if ((pos | iov_iter_alignment(iter)) &
-	    (bdev_logical_block_size(bdev) - 1))
-		return -EINVAL;
-
-	bio = bio_alloc_kiocb(iocb, nr_pages, &blkdev_dio_pool);
-
-	dio = container_of(bio, struct blkdev_dio, bio);
-	dio->is_sync = is_sync = is_sync_kiocb(iocb);
-	if (dio->is_sync) {
-		dio->waiter = current;
-		bio_get(bio);
-	} else {
-		dio->iocb = iocb;
-	}
-
-	dio->size = 0;
-	dio->multi_bio = false;
-	dio->should_dirty = is_read && iter_is_iovec(iter);
-
-	/*
-	 * Don't plug for HIPRI/polled IO, as those should go straight
-	 * to issue
-	 */
-	if (!is_poll)
-		blk_start_plug(&plug);
-
-	for (;;) {
-		bio_set_dev(bio, bdev);
-		bio->bi_iter.bi_sector = pos >> 9;
-		bio->bi_write_hint = iocb->ki_hint;
-		bio->bi_private = dio;
-		bio->bi_end_io = blkdev_bio_end_io;
-		bio->bi_ioprio = iocb->ki_ioprio;
-
-		ret = bio_iov_iter_get_pages(bio, iter);
-		if (unlikely(ret)) {
-			bio->bi_status = BLK_STS_IOERR;
-			bio_endio(bio);
-			break;
-		}
-
-		if (is_read) {
-			bio->bi_opf = REQ_OP_READ;
-			if (dio->should_dirty)
-				bio_set_pages_dirty(bio);
-		} else {
-			bio->bi_opf = dio_bio_write_op(iocb);
-			task_io_account_write(bio->bi_iter.bi_size);
-		}
-		if (iocb->ki_flags & IOCB_NOWAIT)
-			bio->bi_opf |= REQ_NOWAIT;
-
-		dio->size += bio->bi_iter.bi_size;
-		pos += bio->bi_iter.bi_size;
-
-		nr_pages = bio_iov_vecs_to_alloc(iter, BIO_MAX_VECS);
-		if (!nr_pages) {
-			bool polled = false;
-
-			if (iocb->ki_flags & IOCB_HIPRI) {
-				bio_set_polled(bio, iocb);
-				polled = true;
-			}
-
-			qc = submit_bio(bio);
-
-			if (polled)
-				WRITE_ONCE(iocb->ki_cookie, qc);
-			break;
-		}
-
-		if (!dio->multi_bio) {
-			/*
-			 * AIO needs an extra reference to ensure the dio
-			 * structure which is embedded into the first bio
-			 * stays around.
-			 */
-			if (!is_sync)
-				bio_get(bio);
-			dio->multi_bio = true;
-			atomic_set(&dio->ref, 2);
-		} else {
-			atomic_inc(&dio->ref);
-		}
-
-		submit_bio(bio);
-		bio = bio_alloc(GFP_KERNEL, nr_pages);
-	}
-
-	if (!is_poll)
-		blk_finish_plug(&plug);
-
-	if (!is_sync)
-		return -EIOCBQUEUED;
-
-	for (;;) {
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		if (!READ_ONCE(dio->waiter))
-			break;
-
-		if (!(iocb->ki_flags & IOCB_HIPRI) ||
-		    !blk_poll(bdev_get_queue(bdev), qc, true))
-			blk_io_schedule();
-	}
-	__set_current_state(TASK_RUNNING);
-
-	if (!ret)
-		ret = blk_status_to_errno(dio->bio.bi_status);
-	if (likely(!ret))
-		ret = dio->size;
-
-	bio_put(&dio->bio);
-	return ret;
-}
-
-static ssize_t
-blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
-{
-	unsigned int nr_pages;
-
-	if (!iov_iter_count(iter))
-		return 0;
-
-	nr_pages = bio_iov_vecs_to_alloc(iter, BIO_MAX_VECS + 1);
-	if (is_sync_kiocb(iocb) && nr_pages <= BIO_MAX_VECS)
-		return __blkdev_direct_IO_simple(iocb, iter, nr_pages);
-
-	return __blkdev_direct_IO(iocb, iter, bio_max_segs(nr_pages));
-}
-
-static __init int blkdev_init(void)
-{
-	return bioset_init(&blkdev_dio_pool, 4,
-				offsetof(struct blkdev_dio, bio),
-				BIOSET_NEED_BVECS|BIOSET_PERCPU_CACHE);
-}
-module_init(blkdev_init);
-
 int __sync_blockdev(struct block_device *bdev, int wait)
 {
 	if (!bdev)
@@ -637,81 +301,6 @@ out:
 }
 EXPORT_SYMBOL(thaw_bdev);
 
-static int blkdev_writepage(struct page *page, struct writeback_control *wbc)
-{
-	return block_write_full_page(page, blkdev_get_block, wbc);
-}
-
-static int blkdev_readpage(struct file * file, struct page * page)
-{
-	return block_read_full_page(page, blkdev_get_block);
-}
-
-static void blkdev_readahead(struct readahead_control *rac)
-{
-	mpage_readahead(rac, blkdev_get_block);
-}
-
-static int blkdev_write_begin(struct file *file, struct address_space *mapping,
-			loff_t pos, unsigned len, unsigned flags,
-			struct page **pagep, void **fsdata)
-{
-	return block_write_begin(mapping, pos, len, flags, pagep,
-				 blkdev_get_block);
-}
-
-static int blkdev_write_end(struct file *file, struct address_space *mapping,
-			loff_t pos, unsigned len, unsigned copied,
-			struct page *page, void *fsdata)
-{
-	int ret;
-	ret = block_write_end(file, mapping, pos, len, copied, page, fsdata);
-
-	unlock_page(page);
-	put_page(page);
-
-	return ret;
-}
-
-/*
- * private llseek:
- * for a block special file file_inode(file)->i_size is zero
- * so we compute the size by hand (just as in block_read/write above)
- */
-static loff_t block_llseek(struct file *file, loff_t offset, int whence)
-{
-	struct inode *bd_inode = bdev_file_inode(file);
-	loff_t retval;
-
-	inode_lock(bd_inode);
-	retval = fixed_size_llseek(file, offset, whence, i_size_read(bd_inode));
-	inode_unlock(bd_inode);
-	return retval;
-}
-	
-static int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
-		int datasync)
-{
-	struct inode *bd_inode = bdev_file_inode(filp);
-	struct block_device *bdev = I_BDEV(bd_inode);
-	int error;
-	
-	error = file_write_and_wait_range(filp, start, end);
-	if (error)
-		return error;
-
-	/*
-	 * There is no need to serialise calls to blkdev_issue_flush with
-	 * i_mutex and doing so causes performance issues with concurrent
-	 * O_SYNC writers to a block device.
-	 */
-	error = blkdev_issue_flush(bdev);
-	if (error == -EOPNOTSUPP)
-		error = 0;
-
-	return error;
-}
-
 /**
  * bdev_read_page() - Start reading a page from a block device
  * @bdev: The device to read the page from
@@ -1305,35 +894,6 @@ struct block_device *blkdev_get_by_path(const char *path, fmode_t mode,
 }
 EXPORT_SYMBOL(blkdev_get_by_path);
 
-static int blkdev_open(struct inode * inode, struct file * filp)
-{
-	struct block_device *bdev;
-
-	/*
-	 * Preserve backwards compatibility and allow large file access
-	 * even if userspace doesn't ask for it explicitly. Some mkfs
-	 * binary needs it. We might want to drop this workaround
-	 * during an unstable branch.
-	 */
-	filp->f_flags |= O_LARGEFILE;
-
-	filp->f_mode |= FMODE_NOWAIT | FMODE_BUF_RASYNC;
-
-	if (filp->f_flags & O_NDELAY)
-		filp->f_mode |= FMODE_NDELAY;
-	if (filp->f_flags & O_EXCL)
-		filp->f_mode |= FMODE_EXCL;
-	if ((filp->f_flags & O_ACCMODE) == 3)
-		filp->f_mode |= FMODE_WRITE_IOCTL;
-
-	bdev = blkdev_get_by_dev(inode->i_rdev, filp->f_mode, filp);
-	if (IS_ERR(bdev))
-		return PTR_ERR(bdev);
-	filp->f_mapping = bdev->bd_inode->i_mapping;
-	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
-	return 0;
-}
-
 void blkdev_put(struct block_device *bdev, fmode_t mode)
 {
 	struct gendisk *disk = bdev->bd_disk;
@@ -1397,203 +957,6 @@ void blkdev_put(struct block_device *bdev, fmode_t mode)
 }
 EXPORT_SYMBOL(blkdev_put);
 
-static int blkdev_close(struct inode * inode, struct file * filp)
-{
-	struct block_device *bdev = I_BDEV(bdev_file_inode(filp));
-	blkdev_put(bdev, filp->f_mode);
-	return 0;
-}
-
-static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
-{
-	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
-	fmode_t mode = file->f_mode;
-
-	/*
-	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
-	 * to updated it before every ioctl.
-	 */
-	if (file->f_flags & O_NDELAY)
-		mode |= FMODE_NDELAY;
-	else
-		mode &= ~FMODE_NDELAY;
-
-	return blkdev_ioctl(bdev, mode, cmd, arg);
-}
-
-/*
- * Write data to the block device.  Only intended for the block device itself
- * and the raw driver which basically is a fake block device.
- *
- * Does not take i_mutex for the write and thus is not for general purpose
- * use.
- */
-static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
-{
-	struct file *file = iocb->ki_filp;
-	struct inode *bd_inode = bdev_file_inode(file);
-	loff_t size = i_size_read(bd_inode);
-	struct blk_plug plug;
-	size_t shorted = 0;
-	ssize_t ret;
-
-	if (bdev_read_only(I_BDEV(bd_inode)))
-		return -EPERM;
-
-	if (IS_SWAPFILE(bd_inode) && !is_hibernate_resume_dev(bd_inode->i_rdev))
-		return -ETXTBSY;
-
-	if (!iov_iter_count(from))
-		return 0;
-
-	if (iocb->ki_pos >= size)
-		return -ENOSPC;
-
-	if ((iocb->ki_flags & (IOCB_NOWAIT | IOCB_DIRECT)) == IOCB_NOWAIT)
-		return -EOPNOTSUPP;
-
-	size -= iocb->ki_pos;
-	if (iov_iter_count(from) > size) {
-		shorted = iov_iter_count(from) - size;
-		iov_iter_truncate(from, size);
-	}
-
-	blk_start_plug(&plug);
-	ret = __generic_file_write_iter(iocb, from);
-	if (ret > 0)
-		ret = generic_write_sync(iocb, ret);
-	iov_iter_reexpand(from, iov_iter_count(from) + shorted);
-	blk_finish_plug(&plug);
-	return ret;
-}
-
-static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
-{
-	struct file *file = iocb->ki_filp;
-	struct inode *bd_inode = bdev_file_inode(file);
-	loff_t size = i_size_read(bd_inode);
-	loff_t pos = iocb->ki_pos;
-	size_t shorted = 0;
-	ssize_t ret;
-
-	if (pos >= size)
-		return 0;
-
-	size -= pos;
-	if (iov_iter_count(to) > size) {
-		shorted = iov_iter_count(to) - size;
-		iov_iter_truncate(to, size);
-	}
-
-	ret = generic_file_read_iter(iocb, to);
-	iov_iter_reexpand(to, iov_iter_count(to) + shorted);
-	return ret;
-}
-
-static int blkdev_writepages(struct address_space *mapping,
-			     struct writeback_control *wbc)
-{
-	return generic_writepages(mapping, wbc);
-}
-
-static const struct address_space_operations def_blk_aops = {
-	.set_page_dirty	= __set_page_dirty_buffers,
-	.readpage	= blkdev_readpage,
-	.readahead	= blkdev_readahead,
-	.writepage	= blkdev_writepage,
-	.write_begin	= blkdev_write_begin,
-	.write_end	= blkdev_write_end,
-	.writepages	= blkdev_writepages,
-	.direct_IO	= blkdev_direct_IO,
-	.migratepage	= buffer_migrate_page_norefs,
-	.is_dirty_writeback = buffer_check_dirty_writeback,
-};
-
-#define	BLKDEV_FALLOC_FL_SUPPORTED					\
-		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
-		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE)
-
-static long blkdev_fallocate(struct file *file, int mode, loff_t start,
-			     loff_t len)
-{
-	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
-	loff_t end = start + len - 1;
-	loff_t isize;
-	int error;
-
-	/* Fail if we don't recognize the flags. */
-	if (mode & ~BLKDEV_FALLOC_FL_SUPPORTED)
-		return -EOPNOTSUPP;
-
-	/* Don't go off the end of the device. */
-	isize = i_size_read(bdev->bd_inode);
-	if (start >= isize)
-		return -EINVAL;
-	if (end >= isize) {
-		if (mode & FALLOC_FL_KEEP_SIZE) {
-			len = isize - start;
-			end = start + len - 1;
-		} else
-			return -EINVAL;
-	}
-
-	/*
-	 * Don't allow IO that isn't aligned to logical block size.
-	 */
-	if ((start | len) & (bdev_logical_block_size(bdev) - 1))
-		return -EINVAL;
-
-	/* Invalidate the page cache, including dirty pages. */
-	error = truncate_bdev_range(bdev, file->f_mode, start, end);
-	if (error)
-		return error;
-
-	switch (mode) {
-	case FALLOC_FL_ZERO_RANGE:
-	case FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE:
-		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
-					    GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
-		break;
-	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE:
-		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
-					     GFP_KERNEL, BLKDEV_ZERO_NOFALLBACK);
-		break;
-	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_NO_HIDE_STALE:
-		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
-					     GFP_KERNEL, 0);
-		break;
-	default:
-		return -EOPNOTSUPP;
-	}
-	if (error)
-		return error;
-
-	/*
-	 * Invalidate the page cache again; if someone wandered in and dirtied
-	 * a page, we just discard it - userspace has no way of knowing whether
-	 * the write happened before or after discard completing...
-	 */
-	return truncate_bdev_range(bdev, file->f_mode, start, end);
-}
-
-const struct file_operations def_blk_fops = {
-	.open		= blkdev_open,
-	.release	= blkdev_close,
-	.llseek		= block_llseek,
-	.read_iter	= blkdev_read_iter,
-	.write_iter	= blkdev_write_iter,
-	.iopoll		= blkdev_iopoll,
-	.mmap		= generic_file_mmap,
-	.fsync		= blkdev_fsync,
-	.unlocked_ioctl	= block_ioctl,
-#ifdef CONFIG_COMPAT
-	.compat_ioctl	= compat_blkdev_ioctl,
-#endif
-	.splice_read	= generic_file_splice_read,
-	.splice_write	= iter_file_splice_write,
-	.fallocate	= blkdev_fallocate,
-};
-
 /**
  * lookup_bdev  - lookup a struct block_device by name
  * @pathname:	special file representing the block device
diff --git a/block/bfq-iosched.c b/block/bfq-iosched.c
index 480e1a134859..dd13c2bbc29c 100644
--- a/block/bfq-iosched.c
+++ b/block/bfq-iosched.c
@@ -2662,6 +2662,15 @@ bfq_setup_merge(struct bfq_queue *bfqq, struct bfq_queue *new_bfqq)
 	 * are likely to increase the throughput.
 	 */
 	bfqq->new_bfqq = new_bfqq;
+	/*
+	 * The above assignment schedules the following redirections:
+	 * each time some I/O for bfqq arrives, the process that
+	 * generated that I/O is disassociated from bfqq and
+	 * associated with new_bfqq. Here we increases new_bfqq->ref
+	 * in advance, adding the number of processes that are
+	 * expected to be associated with new_bfqq as they happen to
+	 * issue I/O.
+	 */
 	new_bfqq->ref += process_refs;
 	return new_bfqq;
 }
@@ -2724,6 +2733,10 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 {
 	struct bfq_queue *in_service_bfqq, *new_bfqq;
 
+	/* if a merge has already been setup, then proceed with that first */
+	if (bfqq->new_bfqq)
+		return bfqq->new_bfqq;
+
 	/*
 	 * Check delayed stable merge for rotational or non-queueing
 	 * devs. For this branch to be executed, bfqq must not be
@@ -2825,9 +2838,6 @@ bfq_setup_cooperator(struct bfq_data *bfqd, struct bfq_queue *bfqq,
 	if (bfq_too_late_for_merging(bfqq))
 		return NULL;
 
-	if (bfqq->new_bfqq)
-		return bfqq->new_bfqq;
-
 	if (!io_struct || unlikely(bfqq == &bfqd->oom_bfqq))
 		return NULL;
 
diff --git a/block/bio.c b/block/bio.c
index e16849f46b0e..5df3dd282e40 100644
--- a/block/bio.c
+++ b/block/bio.c
@@ -1688,7 +1688,7 @@ EXPORT_SYMBOL(bioset_init_from_src);
 /**
  * bio_alloc_kiocb - Allocate a bio from bio_set based on kiocb
  * @kiocb:	kiocb describing the IO
- * @nr_iovecs:	number of iovecs to pre-allocate
+ * @nr_vecs:	number of iovecs to pre-allocate
  * @bs:		bio_set to allocate from
  *
  * Description:
diff --git a/block/blk-mq.c b/block/blk-mq.c
index 65d3a63aecc6..108a352051be 100644
--- a/block/blk-mq.c
+++ b/block/blk-mq.c
@@ -2135,6 +2135,18 @@ static void blk_add_rq_to_plug(struct blk_plug *plug, struct request *rq)
 	}
 }
 
+/*
+ * Allow 4x BLK_MAX_REQUEST_COUNT requests on plug queue for multiple
+ * queues. This is important for md arrays to benefit from merging
+ * requests.
+ */
+static inline unsigned short blk_plug_max_rq_count(struct blk_plug *plug)
+{
+	if (plug->multiple_queues)
+		return BLK_MAX_REQUEST_COUNT * 4;
+	return BLK_MAX_REQUEST_COUNT;
+}
+
 /**
  * blk_mq_submit_bio - Create and send a request to block device.
  * @bio: Bio pointer.
@@ -2231,7 +2243,7 @@ blk_qc_t blk_mq_submit_bio(struct bio *bio)
 		else
 			last = list_entry_rq(plug->mq_list.prev);
 
-		if (request_count >= BLK_MAX_REQUEST_COUNT || (last &&
+		if (request_count >= blk_plug_max_rq_count(plug) || (last &&
 		    blk_rq_bytes(last) >= BLK_PLUG_FLUSH_SIZE)) {
 			blk_flush_plug_list(plug, false);
 			trace_block_plug(q);
diff --git a/block/blk-throttle.c b/block/blk-throttle.c
index 55c49015e533..7c4e7993ba97 100644
--- a/block/blk-throttle.c
+++ b/block/blk-throttle.c
@@ -2458,6 +2458,7 @@ int blk_throtl_init(struct request_queue *q)
 void blk_throtl_exit(struct request_queue *q)
 {
 	BUG_ON(!q->td);
+	del_timer_sync(&q->td->service_queue.pending_timer);
 	throtl_shutdown_wq(q);
 	blkcg_deactivate_policy(q, &blkcg_policy_throtl);
 	free_percpu(q->td->latency_buckets[READ]);
diff --git a/block/blk.h b/block/blk.h
index 8c96b0c90c48..7d2a0ba7ed21 100644
--- a/block/blk.h
+++ b/block/blk.h
@@ -373,4 +373,6 @@ static inline void bio_clear_hipri(struct bio *bio)
 	bio->bi_opf &= ~REQ_HIPRI;
 }
 
+extern const struct address_space_operations def_blk_aops;
+
 #endif /* BLK_INTERNAL_H */
diff --git a/block/fops.c b/block/fops.c
new file mode 100644
index 000000000000..ffce6f6c68dd
--- /dev/null
+++ b/block/fops.c
@@ -0,0 +1,640 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 1991, 1992  Linus Torvalds
+ * Copyright (C) 2001  Andrea Arcangeli <andrea@suse.de> SuSE
+ * Copyright (C) 2016 - 2020 Christoph Hellwig
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/blkdev.h>
+#include <linux/buffer_head.h>
+#include <linux/mpage.h>
+#include <linux/uio.h>
+#include <linux/namei.h>
+#include <linux/task_io_accounting_ops.h>
+#include <linux/falloc.h>
+#include <linux/suspend.h>
+#include "blk.h"
+
+static struct inode *bdev_file_inode(struct file *file)
+{
+	return file->f_mapping->host;
+}
+
+static int blkdev_get_block(struct inode *inode, sector_t iblock,
+		struct buffer_head *bh, int create)
+{
+	bh->b_bdev = I_BDEV(inode);
+	bh->b_blocknr = iblock;
+	set_buffer_mapped(bh);
+	return 0;
+}
+
+static unsigned int dio_bio_write_op(struct kiocb *iocb)
+{
+	unsigned int op = REQ_OP_WRITE | REQ_SYNC | REQ_IDLE;
+
+	/* avoid the need for a I/O completion work item */
+	if (iocb->ki_flags & IOCB_DSYNC)
+		op |= REQ_FUA;
+	return op;
+}
+
+#define DIO_INLINE_BIO_VECS 4
+
+static void blkdev_bio_end_io_simple(struct bio *bio)
+{
+	struct task_struct *waiter = bio->bi_private;
+
+	WRITE_ONCE(bio->bi_private, NULL);
+	blk_wake_io_task(waiter);
+}
+
+static ssize_t __blkdev_direct_IO_simple(struct kiocb *iocb,
+		struct iov_iter *iter, unsigned int nr_pages)
+{
+	struct file *file = iocb->ki_filp;
+	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
+	struct bio_vec inline_vecs[DIO_INLINE_BIO_VECS], *vecs;
+	loff_t pos = iocb->ki_pos;
+	bool should_dirty = false;
+	struct bio bio;
+	ssize_t ret;
+	blk_qc_t qc;
+
+	if ((pos | iov_iter_alignment(iter)) &
+	    (bdev_logical_block_size(bdev) - 1))
+		return -EINVAL;
+
+	if (nr_pages <= DIO_INLINE_BIO_VECS)
+		vecs = inline_vecs;
+	else {
+		vecs = kmalloc_array(nr_pages, sizeof(struct bio_vec),
+				     GFP_KERNEL);
+		if (!vecs)
+			return -ENOMEM;
+	}
+
+	bio_init(&bio, vecs, nr_pages);
+	bio_set_dev(&bio, bdev);
+	bio.bi_iter.bi_sector = pos >> 9;
+	bio.bi_write_hint = iocb->ki_hint;
+	bio.bi_private = current;
+	bio.bi_end_io = blkdev_bio_end_io_simple;
+	bio.bi_ioprio = iocb->ki_ioprio;
+
+	ret = bio_iov_iter_get_pages(&bio, iter);
+	if (unlikely(ret))
+		goto out;
+	ret = bio.bi_iter.bi_size;
+
+	if (iov_iter_rw(iter) == READ) {
+		bio.bi_opf = REQ_OP_READ;
+		if (iter_is_iovec(iter))
+			should_dirty = true;
+	} else {
+		bio.bi_opf = dio_bio_write_op(iocb);
+		task_io_account_write(ret);
+	}
+	if (iocb->ki_flags & IOCB_NOWAIT)
+		bio.bi_opf |= REQ_NOWAIT;
+	if (iocb->ki_flags & IOCB_HIPRI)
+		bio_set_polled(&bio, iocb);
+
+	qc = submit_bio(&bio);
+	for (;;) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (!READ_ONCE(bio.bi_private))
+			break;
+		if (!(iocb->ki_flags & IOCB_HIPRI) ||
+		    !blk_poll(bdev_get_queue(bdev), qc, true))
+			blk_io_schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+
+	bio_release_pages(&bio, should_dirty);
+	if (unlikely(bio.bi_status))
+		ret = blk_status_to_errno(bio.bi_status);
+
+out:
+	if (vecs != inline_vecs)
+		kfree(vecs);
+
+	bio_uninit(&bio);
+
+	return ret;
+}
+
+struct blkdev_dio {
+	union {
+		struct kiocb		*iocb;
+		struct task_struct	*waiter;
+	};
+	size_t			size;
+	atomic_t		ref;
+	bool			multi_bio : 1;
+	bool			should_dirty : 1;
+	bool			is_sync : 1;
+	struct bio		bio;
+};
+
+static struct bio_set blkdev_dio_pool;
+
+static int blkdev_iopoll(struct kiocb *kiocb, bool wait)
+{
+	struct block_device *bdev = I_BDEV(kiocb->ki_filp->f_mapping->host);
+	struct request_queue *q = bdev_get_queue(bdev);
+
+	return blk_poll(q, READ_ONCE(kiocb->ki_cookie), wait);
+}
+
+static void blkdev_bio_end_io(struct bio *bio)
+{
+	struct blkdev_dio *dio = bio->bi_private;
+	bool should_dirty = dio->should_dirty;
+
+	if (bio->bi_status && !dio->bio.bi_status)
+		dio->bio.bi_status = bio->bi_status;
+
+	if (!dio->multi_bio || atomic_dec_and_test(&dio->ref)) {
+		if (!dio->is_sync) {
+			struct kiocb *iocb = dio->iocb;
+			ssize_t ret;
+
+			if (likely(!dio->bio.bi_status)) {
+				ret = dio->size;
+				iocb->ki_pos += ret;
+			} else {
+				ret = blk_status_to_errno(dio->bio.bi_status);
+			}
+
+			dio->iocb->ki_complete(iocb, ret, 0);
+			if (dio->multi_bio)
+				bio_put(&dio->bio);
+		} else {
+			struct task_struct *waiter = dio->waiter;
+
+			WRITE_ONCE(dio->waiter, NULL);
+			blk_wake_io_task(waiter);
+		}
+	}
+
+	if (should_dirty) {
+		bio_check_pages_dirty(bio);
+	} else {
+		bio_release_pages(bio, false);
+		bio_put(bio);
+	}
+}
+
+static ssize_t __blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter,
+		unsigned int nr_pages)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *inode = bdev_file_inode(file);
+	struct block_device *bdev = I_BDEV(inode);
+	struct blk_plug plug;
+	struct blkdev_dio *dio;
+	struct bio *bio;
+	bool is_poll = (iocb->ki_flags & IOCB_HIPRI) != 0;
+	bool is_read = (iov_iter_rw(iter) == READ), is_sync;
+	loff_t pos = iocb->ki_pos;
+	blk_qc_t qc = BLK_QC_T_NONE;
+	int ret = 0;
+
+	if ((pos | iov_iter_alignment(iter)) &
+	    (bdev_logical_block_size(bdev) - 1))
+		return -EINVAL;
+
+	bio = bio_alloc_kiocb(iocb, nr_pages, &blkdev_dio_pool);
+
+	dio = container_of(bio, struct blkdev_dio, bio);
+	dio->is_sync = is_sync = is_sync_kiocb(iocb);
+	if (dio->is_sync) {
+		dio->waiter = current;
+		bio_get(bio);
+	} else {
+		dio->iocb = iocb;
+	}
+
+	dio->size = 0;
+	dio->multi_bio = false;
+	dio->should_dirty = is_read && iter_is_iovec(iter);
+
+	/*
+	 * Don't plug for HIPRI/polled IO, as those should go straight
+	 * to issue
+	 */
+	if (!is_poll)
+		blk_start_plug(&plug);
+
+	for (;;) {
+		bio_set_dev(bio, bdev);
+		bio->bi_iter.bi_sector = pos >> 9;
+		bio->bi_write_hint = iocb->ki_hint;
+		bio->bi_private = dio;
+		bio->bi_end_io = blkdev_bio_end_io;
+		bio->bi_ioprio = iocb->ki_ioprio;
+
+		ret = bio_iov_iter_get_pages(bio, iter);
+		if (unlikely(ret)) {
+			bio->bi_status = BLK_STS_IOERR;
+			bio_endio(bio);
+			break;
+		}
+
+		if (is_read) {
+			bio->bi_opf = REQ_OP_READ;
+			if (dio->should_dirty)
+				bio_set_pages_dirty(bio);
+		} else {
+			bio->bi_opf = dio_bio_write_op(iocb);
+			task_io_account_write(bio->bi_iter.bi_size);
+		}
+		if (iocb->ki_flags & IOCB_NOWAIT)
+			bio->bi_opf |= REQ_NOWAIT;
+
+		dio->size += bio->bi_iter.bi_size;
+		pos += bio->bi_iter.bi_size;
+
+		nr_pages = bio_iov_vecs_to_alloc(iter, BIO_MAX_VECS);
+		if (!nr_pages) {
+			bool polled = false;
+
+			if (iocb->ki_flags & IOCB_HIPRI) {
+				bio_set_polled(bio, iocb);
+				polled = true;
+			}
+
+			qc = submit_bio(bio);
+
+			if (polled)
+				WRITE_ONCE(iocb->ki_cookie, qc);
+			break;
+		}
+
+		if (!dio->multi_bio) {
+			/*
+			 * AIO needs an extra reference to ensure the dio
+			 * structure which is embedded into the first bio
+			 * stays around.
+			 */
+			if (!is_sync)
+				bio_get(bio);
+			dio->multi_bio = true;
+			atomic_set(&dio->ref, 2);
+		} else {
+			atomic_inc(&dio->ref);
+		}
+
+		submit_bio(bio);
+		bio = bio_alloc(GFP_KERNEL, nr_pages);
+	}
+
+	if (!is_poll)
+		blk_finish_plug(&plug);
+
+	if (!is_sync)
+		return -EIOCBQUEUED;
+
+	for (;;) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		if (!READ_ONCE(dio->waiter))
+			break;
+
+		if (!(iocb->ki_flags & IOCB_HIPRI) ||
+		    !blk_poll(bdev_get_queue(bdev), qc, true))
+			blk_io_schedule();
+	}
+	__set_current_state(TASK_RUNNING);
+
+	if (!ret)
+		ret = blk_status_to_errno(dio->bio.bi_status);
+	if (likely(!ret))
+		ret = dio->size;
+
+	bio_put(&dio->bio);
+	return ret;
+}
+
+static ssize_t blkdev_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
+{
+	unsigned int nr_pages;
+
+	if (!iov_iter_count(iter))
+		return 0;
+
+	nr_pages = bio_iov_vecs_to_alloc(iter, BIO_MAX_VECS + 1);
+	if (is_sync_kiocb(iocb) && nr_pages <= BIO_MAX_VECS)
+		return __blkdev_direct_IO_simple(iocb, iter, nr_pages);
+
+	return __blkdev_direct_IO(iocb, iter, bio_max_segs(nr_pages));
+}
+
+static int blkdev_writepage(struct page *page, struct writeback_control *wbc)
+{
+	return block_write_full_page(page, blkdev_get_block, wbc);
+}
+
+static int blkdev_readpage(struct file * file, struct page * page)
+{
+	return block_read_full_page(page, blkdev_get_block);
+}
+
+static void blkdev_readahead(struct readahead_control *rac)
+{
+	mpage_readahead(rac, blkdev_get_block);
+}
+
+static int blkdev_write_begin(struct file *file, struct address_space *mapping,
+		loff_t pos, unsigned len, unsigned flags, struct page **pagep,
+		void **fsdata)
+{
+	return block_write_begin(mapping, pos, len, flags, pagep,
+				 blkdev_get_block);
+}
+
+static int blkdev_write_end(struct file *file, struct address_space *mapping,
+		loff_t pos, unsigned len, unsigned copied, struct page *page,
+		void *fsdata)
+{
+	int ret;
+	ret = block_write_end(file, mapping, pos, len, copied, page, fsdata);
+
+	unlock_page(page);
+	put_page(page);
+
+	return ret;
+}
+
+static int blkdev_writepages(struct address_space *mapping,
+			     struct writeback_control *wbc)
+{
+	return generic_writepages(mapping, wbc);
+}
+
+const struct address_space_operations def_blk_aops = {
+	.set_page_dirty	= __set_page_dirty_buffers,
+	.readpage	= blkdev_readpage,
+	.readahead	= blkdev_readahead,
+	.writepage	= blkdev_writepage,
+	.write_begin	= blkdev_write_begin,
+	.write_end	= blkdev_write_end,
+	.writepages	= blkdev_writepages,
+	.direct_IO	= blkdev_direct_IO,
+	.migratepage	= buffer_migrate_page_norefs,
+	.is_dirty_writeback = buffer_check_dirty_writeback,
+};
+
+/*
+ * for a block special file file_inode(file)->i_size is zero
+ * so we compute the size by hand (just as in block_read/write above)
+ */
+static loff_t blkdev_llseek(struct file *file, loff_t offset, int whence)
+{
+	struct inode *bd_inode = bdev_file_inode(file);
+	loff_t retval;
+
+	inode_lock(bd_inode);
+	retval = fixed_size_llseek(file, offset, whence, i_size_read(bd_inode));
+	inode_unlock(bd_inode);
+	return retval;
+}
+
+static int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
+		int datasync)
+{
+	struct inode *bd_inode = bdev_file_inode(filp);
+	struct block_device *bdev = I_BDEV(bd_inode);
+	int error;
+
+	error = file_write_and_wait_range(filp, start, end);
+	if (error)
+		return error;
+
+	/*
+	 * There is no need to serialise calls to blkdev_issue_flush with
+	 * i_mutex and doing so causes performance issues with concurrent
+	 * O_SYNC writers to a block device.
+	 */
+	error = blkdev_issue_flush(bdev);
+	if (error == -EOPNOTSUPP)
+		error = 0;
+
+	return error;
+}
+
+static int blkdev_open(struct inode *inode, struct file *filp)
+{
+	struct block_device *bdev;
+
+	/*
+	 * Preserve backwards compatibility and allow large file access
+	 * even if userspace doesn't ask for it explicitly. Some mkfs
+	 * binary needs it. We might want to drop this workaround
+	 * during an unstable branch.
+	 */
+	filp->f_flags |= O_LARGEFILE;
+	filp->f_mode |= FMODE_NOWAIT | FMODE_BUF_RASYNC;
+
+	if (filp->f_flags & O_NDELAY)
+		filp->f_mode |= FMODE_NDELAY;
+	if (filp->f_flags & O_EXCL)
+		filp->f_mode |= FMODE_EXCL;
+	if ((filp->f_flags & O_ACCMODE) == 3)
+		filp->f_mode |= FMODE_WRITE_IOCTL;
+
+	bdev = blkdev_get_by_dev(inode->i_rdev, filp->f_mode, filp);
+	if (IS_ERR(bdev))
+		return PTR_ERR(bdev);
+	filp->f_mapping = bdev->bd_inode->i_mapping;
+	filp->f_wb_err = filemap_sample_wb_err(filp->f_mapping);
+	return 0;
+}
+
+static int blkdev_close(struct inode *inode, struct file *filp)
+{
+	struct block_device *bdev = I_BDEV(bdev_file_inode(filp));
+
+	blkdev_put(bdev, filp->f_mode);
+	return 0;
+}
+
+static long block_ioctl(struct file *file, unsigned cmd, unsigned long arg)
+{
+	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
+	fmode_t mode = file->f_mode;
+
+	/*
+	 * O_NDELAY can be altered using fcntl(.., F_SETFL, ..), so we have
+	 * to updated it before every ioctl.
+	 */
+	if (file->f_flags & O_NDELAY)
+		mode |= FMODE_NDELAY;
+	else
+		mode &= ~FMODE_NDELAY;
+
+	return blkdev_ioctl(bdev, mode, cmd, arg);
+}
+
+/*
+ * Write data to the block device.  Only intended for the block device itself
+ * and the raw driver which basically is a fake block device.
+ *
+ * Does not take i_mutex for the write and thus is not for general purpose
+ * use.
+ */
+static ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *bd_inode = bdev_file_inode(file);
+	loff_t size = i_size_read(bd_inode);
+	struct blk_plug plug;
+	size_t shorted = 0;
+	ssize_t ret;
+
+	if (bdev_read_only(I_BDEV(bd_inode)))
+		return -EPERM;
+
+	if (IS_SWAPFILE(bd_inode) && !is_hibernate_resume_dev(bd_inode->i_rdev))
+		return -ETXTBSY;
+
+	if (!iov_iter_count(from))
+		return 0;
+
+	if (iocb->ki_pos >= size)
+		return -ENOSPC;
+
+	if ((iocb->ki_flags & (IOCB_NOWAIT | IOCB_DIRECT)) == IOCB_NOWAIT)
+		return -EOPNOTSUPP;
+
+	size -= iocb->ki_pos;
+	if (iov_iter_count(from) > size) {
+		shorted = iov_iter_count(from) - size;
+		iov_iter_truncate(from, size);
+	}
+
+	blk_start_plug(&plug);
+	ret = __generic_file_write_iter(iocb, from);
+	if (ret > 0)
+		ret = generic_write_sync(iocb, ret);
+	iov_iter_reexpand(from, iov_iter_count(from) + shorted);
+	blk_finish_plug(&plug);
+	return ret;
+}
+
+static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
+{
+	struct file *file = iocb->ki_filp;
+	struct inode *bd_inode = bdev_file_inode(file);
+	loff_t size = i_size_read(bd_inode);
+	loff_t pos = iocb->ki_pos;
+	size_t shorted = 0;
+	ssize_t ret;
+
+	if (pos >= size)
+		return 0;
+
+	size -= pos;
+	if (iov_iter_count(to) > size) {
+		shorted = iov_iter_count(to) - size;
+		iov_iter_truncate(to, size);
+	}
+
+	ret = generic_file_read_iter(iocb, to);
+	iov_iter_reexpand(to, iov_iter_count(to) + shorted);
+	return ret;
+}
+
+#define	BLKDEV_FALLOC_FL_SUPPORTED					\
+		(FALLOC_FL_KEEP_SIZE | FALLOC_FL_PUNCH_HOLE |		\
+		 FALLOC_FL_ZERO_RANGE | FALLOC_FL_NO_HIDE_STALE)
+
+static long blkdev_fallocate(struct file *file, int mode, loff_t start,
+			     loff_t len)
+{
+	struct block_device *bdev = I_BDEV(bdev_file_inode(file));
+	loff_t end = start + len - 1;
+	loff_t isize;
+	int error;
+
+	/* Fail if we don't recognize the flags. */
+	if (mode & ~BLKDEV_FALLOC_FL_SUPPORTED)
+		return -EOPNOTSUPP;
+
+	/* Don't go off the end of the device. */
+	isize = i_size_read(bdev->bd_inode);
+	if (start >= isize)
+		return -EINVAL;
+	if (end >= isize) {
+		if (mode & FALLOC_FL_KEEP_SIZE) {
+			len = isize - start;
+			end = start + len - 1;
+		} else
+			return -EINVAL;
+	}
+
+	/*
+	 * Don't allow IO that isn't aligned to logical block size.
+	 */
+	if ((start | len) & (bdev_logical_block_size(bdev) - 1))
+		return -EINVAL;
+
+	/* Invalidate the page cache, including dirty pages. */
+	error = truncate_bdev_range(bdev, file->f_mode, start, end);
+	if (error)
+		return error;
+
+	switch (mode) {
+	case FALLOC_FL_ZERO_RANGE:
+	case FALLOC_FL_ZERO_RANGE | FALLOC_FL_KEEP_SIZE:
+		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
+					    GFP_KERNEL, BLKDEV_ZERO_NOUNMAP);
+		break;
+	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE:
+		error = blkdev_issue_zeroout(bdev, start >> 9, len >> 9,
+					     GFP_KERNEL, BLKDEV_ZERO_NOFALLBACK);
+		break;
+	case FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE | FALLOC_FL_NO_HIDE_STALE:
+		error = blkdev_issue_discard(bdev, start >> 9, len >> 9,
+					     GFP_KERNEL, 0);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+	if (error)
+		return error;
+
+	/*
+	 * Invalidate the page cache again; if someone wandered in and dirtied
+	 * a page, we just discard it - userspace has no way of knowing whether
+	 * the write happened before or after discard completing...
+	 */
+	return truncate_bdev_range(bdev, file->f_mode, start, end);
+}
+
+const struct file_operations def_blk_fops = {
+	.open		= blkdev_open,
+	.release	= blkdev_close,
+	.llseek		= blkdev_llseek,
+	.read_iter	= blkdev_read_iter,
+	.write_iter	= blkdev_write_iter,
+	.iopoll		= blkdev_iopoll,
+	.mmap		= generic_file_mmap,
+	.fsync		= blkdev_fsync,
+	.unlocked_ioctl	= block_ioctl,
+#ifdef CONFIG_COMPAT
+	.compat_ioctl	= compat_blkdev_ioctl,
+#endif
+	.splice_read	= generic_file_splice_read,
+	.splice_write	= iter_file_splice_write,
+	.fallocate	= blkdev_fallocate,
+};
+
+static __init int blkdev_init(void)
+{
+	return bioset_init(&blkdev_dio_pool, 4,
+				offsetof(struct blkdev_dio, bio),
+				BIOSET_NEED_BVECS|BIOSET_PERCPU_CACHE);
+}
+module_init(blkdev_init);
diff --git a/block/genhd.c b/block/genhd.c
index 567549a011d1..7b6e5e1cf956 100644
--- a/block/genhd.c
+++ b/block/genhd.c
@@ -183,6 +183,7 @@ static struct blk_major_name {
 	void (*probe)(dev_t devt);
 } *major_names[BLKDEV_MAJOR_HASH_SIZE];
 static DEFINE_MUTEX(major_names_lock);
+static DEFINE_SPINLOCK(major_names_spinlock);
 
 /* index in the above - for now: assume no multimajor ranges */
 static inline int major_to_index(unsigned major)
@@ -195,11 +196,11 @@ void blkdev_show(struct seq_file *seqf, off_t offset)
 {
 	struct blk_major_name *dp;
 
-	mutex_lock(&major_names_lock);
+	spin_lock(&major_names_spinlock);
 	for (dp = major_names[major_to_index(offset)]; dp; dp = dp->next)
 		if (dp->major == offset)
 			seq_printf(seqf, "%3d %s\n", dp->major, dp->name);
-	mutex_unlock(&major_names_lock);
+	spin_unlock(&major_names_spinlock);
 }
 #endif /* CONFIG_PROC_FS */
 
@@ -271,6 +272,7 @@ int __register_blkdev(unsigned int major, const char *name,
 	p->next = NULL;
 	index = major_to_index(major);
 
+	spin_lock(&major_names_spinlock);
 	for (n = &major_names[index]; *n; n = &(*n)->next) {
 		if ((*n)->major == major)
 			break;
@@ -279,6 +281,7 @@ int __register_blkdev(unsigned int major, const char *name,
 		*n = p;
 	else
 		ret = -EBUSY;
+	spin_unlock(&major_names_spinlock);
 
 	if (ret < 0) {
 		printk("register_blkdev: cannot get major %u for %s\n",
@@ -298,6 +301,7 @@ void unregister_blkdev(unsigned int major, const char *name)
 	int index = major_to_index(major);
 
 	mutex_lock(&major_names_lock);
+	spin_lock(&major_names_spinlock);
 	for (n = &major_names[index]; *n; n = &(*n)->next)
 		if ((*n)->major == major)
 			break;
@@ -307,6 +311,7 @@ void unregister_blkdev(unsigned int major, const char *name)
 		p = *n;
 		*n = p->next;
 	}
+	spin_unlock(&major_names_spinlock);
 	mutex_unlock(&major_names_lock);
 	kfree(p);
 }
diff --git a/block/mq-deadline.c b/block/mq-deadline.c
index 3c3693c34f06..7f3c3932b723 100644
--- a/block/mq-deadline.c
+++ b/block/mq-deadline.c
@@ -270,12 +270,6 @@ deadline_move_request(struct deadline_data *dd, struct dd_per_prio *per_prio,
 	deadline_remove_request(rq->q, per_prio, rq);
 }
 
-/* Number of requests queued for a given priority level. */
-static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio)
-{
-	return dd_sum(dd, inserted, prio) - dd_sum(dd, completed, prio);
-}
-
 /*
  * deadline_check_fifo returns 0 if there are no expired requests on the fifo,
  * 1 otherwise. Requires !list_empty(&dd->fifo_list[data_dir])
@@ -953,6 +947,12 @@ static int dd_async_depth_show(void *data, struct seq_file *m)
 	return 0;
 }
 
+/* Number of requests queued for a given priority level. */
+static u32 dd_queued(struct deadline_data *dd, enum dd_prio prio)
+{
+	return dd_sum(dd, inserted, prio) - dd_sum(dd, completed, prio);
+}
+
 static int dd_queued_show(void *data, struct seq_file *m)
 {
 	struct request_queue *q = data;
diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 8cc195c4c861..24f662d8bd39 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -54,6 +54,7 @@ struct acpi_memory_info {
 struct acpi_memory_device {
 	struct acpi_device *device;
 	struct list_head res_list;
+	int mgid;
 };
 
 static acpi_status
@@ -169,12 +170,33 @@ static void acpi_unbind_memory_blocks(struct acpi_memory_info *info)
 static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 {
 	acpi_handle handle = mem_device->device->handle;
+	mhp_t mhp_flags = MHP_NID_IS_MGID;
 	int result, num_enabled = 0;
 	struct acpi_memory_info *info;
-	mhp_t mhp_flags = MHP_NONE;
-	int node;
+	u64 total_length = 0;
+	int node, mgid;
 
 	node = acpi_get_node(handle);
+
+	list_for_each_entry(info, &mem_device->res_list, list) {
+		if (!info->length)
+			continue;
+		/* We want a single node for the whole memory group */
+		if (node < 0)
+			node = memory_add_physaddr_to_nid(info->start_addr);
+		total_length += info->length;
+	}
+
+	if (!total_length) {
+		dev_err(&mem_device->device->dev, "device is empty\n");
+		return -EINVAL;
+	}
+
+	mgid = memory_group_register_static(node, PFN_UP(total_length));
+	if (mgid < 0)
+		return mgid;
+	mem_device->mgid = mgid;
+
 	/*
 	 * Tell the VM there is more memory here...
 	 * Note: Assume that this function returns zero on success
@@ -182,22 +204,16 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 	 * (i.e. memory-hot-remove function)
 	 */
 	list_for_each_entry(info, &mem_device->res_list, list) {
-		if (info->enabled) { /* just sanity check...*/
-			num_enabled++;
-			continue;
-		}
 		/*
 		 * If the memory block size is zero, please ignore it.
 		 * Don't try to do the following memory hotplug flowchart.
 		 */
 		if (!info->length)
 			continue;
-		if (node < 0)
-			node = memory_add_physaddr_to_nid(info->start_addr);
 
 		if (mhp_supports_memmap_on_memory(info->length))
 			mhp_flags |= MHP_MEMMAP_ON_MEMORY;
-		result = __add_memory(node, info->start_addr, info->length,
+		result = __add_memory(mgid, info->start_addr, info->length,
 				      mhp_flags);
 
 		/*
@@ -239,19 +255,14 @@ static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 
 static void acpi_memory_remove_memory(struct acpi_memory_device *mem_device)
 {
-	acpi_handle handle = mem_device->device->handle;
 	struct acpi_memory_info *info, *n;
-	int nid = acpi_get_node(handle);
 
 	list_for_each_entry_safe(info, n, &mem_device->res_list, list) {
 		if (!info->enabled)
 			continue;
 
-		if (nid == NUMA_NO_NODE)
-			nid = memory_add_physaddr_to_nid(info->start_addr);
-
 		acpi_unbind_memory_blocks(info);
-		__remove_memory(nid, info->start_addr, info->length);
+		__remove_memory(info->start_addr, info->length);
 		list_del(&info->list);
 		kfree(info);
 	}
@@ -262,6 +273,10 @@ static void acpi_memory_device_free(struct acpi_memory_device *mem_device)
 	if (!mem_device)
 		return;
 
+	/* In case we succeeded adding *some* memory, unregistering fails. */
+	if (mem_device->mgid >= 0)
+		memory_group_unregister(mem_device->mgid);
+
 	acpi_memory_free_device_resources(mem_device);
 	mem_device->device->driver_data = NULL;
 	kfree(mem_device);
@@ -282,6 +297,7 @@ static int acpi_memory_device_add(struct acpi_device *device,
 
 	INIT_LIST_HEAD(&mem_device->res_list);
 	mem_device->device = device;
+	mem_device->mgid = -1;
 	sprintf(acpi_device_name(device), "%s", ACPI_MEMORY_DEVICE_NAME);
 	sprintf(acpi_device_class(device), "%s", ACPI_MEMORY_DEVICE_CLASS);
 	device->driver_data = mem_device;
diff --git a/drivers/acpi/cppc_acpi.c b/drivers/acpi/cppc_acpi.c
index a4d4eebba1da..bd482108310c 100644
--- a/drivers/acpi/cppc_acpi.c
+++ b/drivers/acpi/cppc_acpi.c
@@ -1008,23 +1008,14 @@ static int cpc_write(int cpu, struct cpc_register_resource *reg_res, u64 val)
 	return ret_val;
 }
 
-/**
- * cppc_get_desired_perf - Get the value of desired performance register.
- * @cpunum: CPU from which to get desired performance.
- * @desired_perf: address of a variable to store the returned desired performance
- *
- * Return: 0 for success, -EIO otherwise.
- */
-int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
+static int cppc_get_perf(int cpunum, enum cppc_regs reg_idx, u64 *perf)
 {
 	struct cpc_desc *cpc_desc = per_cpu(cpc_desc_ptr, cpunum);
-	int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
-	struct cpc_register_resource *desired_reg;
-	struct cppc_pcc_data *pcc_ss_data = NULL;
-
-	desired_reg = &cpc_desc->cpc_regs[DESIRED_PERF];
+	struct cpc_register_resource *reg = &cpc_desc->cpc_regs[reg_idx];
 
-	if (CPC_IN_PCC(desired_reg)) {
+	if (CPC_IN_PCC(reg)) {
+		int pcc_ss_id = per_cpu(cpu_pcc_subspace_idx, cpunum);
+		struct cppc_pcc_data *pcc_ss_data = NULL;
 		int ret = 0;
 
 		if (pcc_ss_id < 0)
@@ -1035,7 +1026,7 @@ int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
 		down_write(&pcc_ss_data->pcc_lock);
 
 		if (send_pcc_cmd(pcc_ss_id, CMD_READ) >= 0)
-			cpc_read(cpunum, desired_reg, desired_perf);
+			cpc_read(cpunum, reg, perf);
 		else
 			ret = -EIO;
 
@@ -1044,13 +1035,37 @@ int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
 		return ret;
 	}
 
-	cpc_read(cpunum, desired_reg, desired_perf);
+	cpc_read(cpunum, reg, perf);
 
 	return 0;
 }
+
+/**
+ * cppc_get_desired_perf - Get the desired performance register value.
+ * @cpunum: CPU from which to get desired performance.
+ * @desired_perf: Return address.
+ *
+ * Return: 0 for success, -EIO otherwise.
+ */
+int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
+{
+	return cppc_get_perf(cpunum, DESIRED_PERF, desired_perf);
+}
 EXPORT_SYMBOL_GPL(cppc_get_desired_perf);
 
 /**
+ * cppc_get_nominal_perf - Get the nominal performance register value.
+ * @cpunum: CPU from which to get nominal performance.
+ * @nominal_perf: Return address.
+ *
+ * Return: 0 for success, -EIO otherwise.
+ */
+int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
+{
+	return cppc_get_perf(cpunum, NOMINAL_PERF, nominal_perf);
+}
+
+/**
  * cppc_get_perf_caps - Get a CPU's performance capabilities.
  * @cpunum: CPU from which to get capabilities info.
  * @perf_caps: ptr to cppc_perf_caps. See cppc_acpi.h
diff --git a/drivers/acpi/prmt.c b/drivers/acpi/prmt.c
index 1f6007abcf18..89c22bc55057 100644
--- a/drivers/acpi/prmt.c
+++ b/drivers/acpi/prmt.c
@@ -288,10 +288,18 @@ invalid_guid:
 
 void __init init_prmt(void)
 {
+	struct acpi_table_header *tbl;
 	acpi_status status;
-	int mc = acpi_table_parse_entries(ACPI_SIG_PRMT, sizeof(struct acpi_table_prmt) +
+	int mc;
+
+	status = acpi_get_table(ACPI_SIG_PRMT, 0, &tbl);
+	if (ACPI_FAILURE(status))
+		return;
+
+	mc = acpi_table_parse_entries(ACPI_SIG_PRMT, sizeof(struct acpi_table_prmt) +
 					  sizeof (struct acpi_table_prmt_header),
 					  0, acpi_parse_prmt, 0);
+	acpi_put_table(tbl);
 	/*
 	 * Return immediately if PRMT table is not present or no PRM module found.
 	 */
diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c
index b24513ec3fae..5b54c80b9d32 100644
--- a/drivers/acpi/scan.c
+++ b/drivers/acpi/scan.c
@@ -16,7 +16,6 @@
 #include <linux/signal.h>
 #include <linux/kthread.h>
 #include <linux/dmi.h>
-#include <linux/nls.h>
 #include <linux/dma-map-ops.h>
 #include <linux/platform_data/x86/apple.h>
 #include <linux/pgtable.h>
diff --git a/drivers/acpi/x86/s2idle.c b/drivers/acpi/x86/s2idle.c
index 3a308461246a..bd92b549fd5a 100644
--- a/drivers/acpi/x86/s2idle.c
+++ b/drivers/acpi/x86/s2idle.c
@@ -449,25 +449,30 @@ int acpi_s2idle_prepare_late(void)
 	if (pm_debug_messages_on)
 		lpi_check_constraints();
 
-	if (lps0_dsm_func_mask_microsoft > 0) {
+	/* Screen off */
+	if (lps0_dsm_func_mask > 0)
+		acpi_sleep_run_lps0_dsm(acpi_s2idle_vendor_amd() ?
+					ACPI_LPS0_SCREEN_OFF_AMD :
+					ACPI_LPS0_SCREEN_OFF,
+					lps0_dsm_func_mask, lps0_dsm_guid);
+
+	if (lps0_dsm_func_mask_microsoft > 0)
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF,
 				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_MS_ENTRY,
-				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
+
+	/* LPS0 entry */
+	if (lps0_dsm_func_mask > 0)
+		acpi_sleep_run_lps0_dsm(acpi_s2idle_vendor_amd() ?
+					ACPI_LPS0_ENTRY_AMD :
+					ACPI_LPS0_ENTRY,
+					lps0_dsm_func_mask, lps0_dsm_guid);
+	if (lps0_dsm_func_mask_microsoft > 0) {
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY,
 				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
-	} else if (acpi_s2idle_vendor_amd()) {
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF_AMD,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY_AMD,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-	} else {
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_OFF,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_ENTRY,
-				lps0_dsm_func_mask, lps0_dsm_guid);
+		/* modern standby entry */
+		acpi_sleep_run_lps0_dsm(ACPI_LPS0_MS_ENTRY,
+				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
 	}
-
 	return 0;
 }
 
@@ -476,24 +481,30 @@ void acpi_s2idle_restore_early(void)
 	if (!lps0_device_handle || sleep_no_lps0)
 		return;
 
-	if (lps0_dsm_func_mask_microsoft > 0) {
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT,
-				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
+	/* Modern standby exit */
+	if (lps0_dsm_func_mask_microsoft > 0)
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_MS_EXIT,
 				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON,
-				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
-	} else if (acpi_s2idle_vendor_amd()) {
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT_AMD,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON_AMD,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-	} else {
+
+	/* LPS0 exit */
+	if (lps0_dsm_func_mask > 0)
+		acpi_sleep_run_lps0_dsm(acpi_s2idle_vendor_amd() ?
+					ACPI_LPS0_EXIT_AMD :
+					ACPI_LPS0_EXIT,
+					lps0_dsm_func_mask, lps0_dsm_guid);
+	if (lps0_dsm_func_mask_microsoft > 0)
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_EXIT,
-				lps0_dsm_func_mask, lps0_dsm_guid);
+				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
+
+	/* Screen on */
+	if (lps0_dsm_func_mask_microsoft > 0)
 		acpi_sleep_run_lps0_dsm(ACPI_LPS0_SCREEN_ON,
-				lps0_dsm_func_mask, lps0_dsm_guid);
-	}
+				lps0_dsm_func_mask_microsoft, lps0_dsm_guid_microsoft);
+	if (lps0_dsm_func_mask > 0)
+		acpi_sleep_run_lps0_dsm(acpi_s2idle_vendor_amd() ?
+					ACPI_LPS0_SCREEN_ON_AMD :
+					ACPI_LPS0_SCREEN_ON,
+					lps0_dsm_func_mask, lps0_dsm_guid);
 }
 
 static const struct platform_s2idle_ops acpi_s2idle_ops_lps0 = {
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index b8459c54f739..eed65311b5d1 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -2186,6 +2186,25 @@ not_supported:
 	dev->flags &= ~ATA_DFLAG_NCQ_PRIO;
 }
 
+static bool ata_dev_check_adapter(struct ata_device *dev,
+				  unsigned short vendor_id)
+{
+	struct pci_dev *pcidev = NULL;
+	struct device *parent_dev = NULL;
+
+	for (parent_dev = dev->tdev.parent; parent_dev != NULL;
+	     parent_dev = parent_dev->parent) {
+		if (dev_is_pci(parent_dev)) {
+			pcidev = to_pci_dev(parent_dev);
+			if (pcidev->vendor == vendor_id)
+				return true;
+			break;
+		}
+	}
+
+	return false;
+}
+
 static int ata_dev_config_ncq(struct ata_device *dev,
 			       char *desc, size_t desc_sz)
 {
@@ -2204,6 +2223,13 @@ static int ata_dev_config_ncq(struct ata_device *dev,
 		snprintf(desc, desc_sz, "NCQ (not used)");
 		return 0;
 	}
+
+	if (dev->horkage & ATA_HORKAGE_NO_NCQ_ON_ATI &&
+	    ata_dev_check_adapter(dev, PCI_VENDOR_ID_ATI)) {
+		snprintf(desc, desc_sz, "NCQ (not used)");
+		return 0;
+	}
+
 	if (ap->flags & ATA_FLAG_NCQ) {
 		hdepth = min(ap->scsi_host->can_queue, ATA_MAX_QUEUE);
 		dev->flags |= ATA_DFLAG_NCQ;
@@ -3970,6 +3996,12 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 	{ "Samsung SSD 850*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
+	{ "Samsung SSD 860*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NO_NCQ_ON_ATI, },
+	{ "Samsung SSD 870*",		NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
+						ATA_HORKAGE_ZERO_AFTER_TRIM |
+						ATA_HORKAGE_NO_NCQ_ON_ATI, },
 	{ "FCCT*M500*",			NULL,	ATA_HORKAGE_NO_NCQ_TRIM |
 						ATA_HORKAGE_ZERO_AFTER_TRIM, },
 
@@ -6124,6 +6156,8 @@ static int __init ata_parse_force_one(char **cur,
 		{ "ncq",	.horkage_off	= ATA_HORKAGE_NONCQ },
 		{ "noncqtrim",	.horkage_on	= ATA_HORKAGE_NO_NCQ_TRIM },
 		{ "ncqtrim",	.horkage_off	= ATA_HORKAGE_NO_NCQ_TRIM },
+		{ "noncqati",	.horkage_on	= ATA_HORKAGE_NO_NCQ_ON_ATI },
+		{ "ncqati",	.horkage_off	= ATA_HORKAGE_NO_NCQ_ON_ATI },
 		{ "dump_id",	.horkage_on	= ATA_HORKAGE_DUMP_ID },
 		{ "pio0",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 0) },
 		{ "pio1",	.xfer_mask	= 1 << (ATA_SHIFT_PIO + 1) },
diff --git a/drivers/base/arch_topology.c b/drivers/base/arch_topology.c
index 921312a8d957..43407665918f 100644
--- a/drivers/base/arch_topology.c
+++ b/drivers/base/arch_topology.c
@@ -149,6 +149,7 @@ void topology_set_freq_scale(const struct cpumask *cpus, unsigned long cur_freq,
 }
 
 DEFINE_PER_CPU(unsigned long, cpu_scale) = SCHED_CAPACITY_SCALE;
+EXPORT_PER_CPU_SYMBOL_GPL(cpu_scale);
 
 void topology_set_cpu_scale(unsigned int cpu, unsigned long capacity)
 {
@@ -165,6 +166,7 @@ void topology_set_thermal_pressure(const struct cpumask *cpus,
 	for_each_cpu(cpu, cpus)
 		WRITE_ONCE(per_cpu(thermal_pressure, cpu), th_pressure);
 }
+EXPORT_SYMBOL_GPL(topology_set_thermal_pressure);
 
 static ssize_t cpu_capacity_show(struct device *dev,
 				 struct device_attribute *attr,
diff --git a/drivers/base/memory.c b/drivers/base/memory.c
index e3fd2dbf4eea..365cd4a7f239 100644
--- a/drivers/base/memory.c
+++ b/drivers/base/memory.c
@@ -82,6 +82,12 @@ static struct bus_type memory_subsys = {
  */
 static DEFINE_XARRAY(memory_blocks);
 
+/*
+ * Memory groups, indexed by memory group id (mgid).
+ */
+static DEFINE_XARRAY_FLAGS(memory_groups, XA_FLAGS_ALLOC);
+#define MEMORY_GROUP_MARK_DYNAMIC	XA_MARK_1
+
 static BLOCKING_NOTIFIER_HEAD(memory_chain);
 
 int register_memory_notifier(struct notifier_block *nb)
@@ -177,7 +183,8 @@ static int memory_block_online(struct memory_block *mem)
 	struct zone *zone;
 	int ret;
 
-	zone = zone_for_pfn_range(mem->online_type, mem->nid, start_pfn, nr_pages);
+	zone = zone_for_pfn_range(mem->online_type, mem->nid, mem->group,
+				  start_pfn, nr_pages);
 
 	/*
 	 * Although vmemmap pages have a different lifecycle than the pages
@@ -193,7 +200,7 @@ static int memory_block_online(struct memory_block *mem)
 	}
 
 	ret = online_pages(start_pfn + nr_vmemmap_pages,
-			   nr_pages - nr_vmemmap_pages, zone);
+			   nr_pages - nr_vmemmap_pages, zone, mem->group);
 	if (ret) {
 		if (nr_vmemmap_pages)
 			mhp_deinit_memmap_on_memory(start_pfn, nr_vmemmap_pages);
@@ -205,7 +212,8 @@ static int memory_block_online(struct memory_block *mem)
 	 * now already properly populated.
 	 */
 	if (nr_vmemmap_pages)
-		adjust_present_page_count(zone, nr_vmemmap_pages);
+		adjust_present_page_count(pfn_to_page(start_pfn), mem->group,
+					  nr_vmemmap_pages);
 
 	return ret;
 }
@@ -215,24 +223,23 @@ static int memory_block_offline(struct memory_block *mem)
 	unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr);
 	unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
 	unsigned long nr_vmemmap_pages = mem->nr_vmemmap_pages;
-	struct zone *zone;
 	int ret;
 
 	/*
 	 * Unaccount before offlining, such that unpopulated zone and kthreads
 	 * can properly be torn down in offline_pages().
 	 */
-	if (nr_vmemmap_pages) {
-		zone = page_zone(pfn_to_page(start_pfn));
-		adjust_present_page_count(zone, -nr_vmemmap_pages);
-	}
+	if (nr_vmemmap_pages)
+		adjust_present_page_count(pfn_to_page(start_pfn), mem->group,
+					  -nr_vmemmap_pages);
 
 	ret = offline_pages(start_pfn + nr_vmemmap_pages,
-			    nr_pages - nr_vmemmap_pages);
+			    nr_pages - nr_vmemmap_pages, mem->group);
 	if (ret) {
 		/* offline_pages() failed. Account back. */
 		if (nr_vmemmap_pages)
-			adjust_present_page_count(zone, nr_vmemmap_pages);
+			adjust_present_page_count(pfn_to_page(start_pfn),
+						  mem->group, nr_vmemmap_pages);
 		return ret;
 	}
 
@@ -374,12 +381,13 @@ static ssize_t phys_device_show(struct device *dev,
 
 #ifdef CONFIG_MEMORY_HOTREMOVE
 static int print_allowed_zone(char *buf, int len, int nid,
+			      struct memory_group *group,
 			      unsigned long start_pfn, unsigned long nr_pages,
 			      int online_type, struct zone *default_zone)
 {
 	struct zone *zone;
 
-	zone = zone_for_pfn_range(online_type, nid, start_pfn, nr_pages);
+	zone = zone_for_pfn_range(online_type, nid, group, start_pfn, nr_pages);
 	if (zone == default_zone)
 		return 0;
 
@@ -392,9 +400,10 @@ static ssize_t valid_zones_show(struct device *dev,
 	struct memory_block *mem = to_memory_block(dev);
 	unsigned long start_pfn = section_nr_to_pfn(mem->start_section_nr);
 	unsigned long nr_pages = PAGES_PER_SECTION * sections_per_block;
+	struct memory_group *group = mem->group;
 	struct zone *default_zone;
+	int nid = mem->nid;
 	int len = 0;
-	int nid;
 
 	/*
 	 * Check the existing zone. Make sure that we do that only on the
@@ -413,14 +422,13 @@ static ssize_t valid_zones_show(struct device *dev,
 		goto out;
 	}
 
-	nid = mem->nid;
-	default_zone = zone_for_pfn_range(MMOP_ONLINE, nid, start_pfn,
-					  nr_pages);
+	default_zone = zone_for_pfn_range(MMOP_ONLINE, nid, group,
+					  start_pfn, nr_pages);
 
 	len += sysfs_emit_at(buf, len, "%s", default_zone->name);
-	len += print_allowed_zone(buf, len, nid, start_pfn, nr_pages,
+	len += print_allowed_zone(buf, len, nid, group, start_pfn, nr_pages,
 				  MMOP_ONLINE_KERNEL, default_zone);
-	len += print_allowed_zone(buf, len, nid, start_pfn, nr_pages,
+	len += print_allowed_zone(buf, len, nid, group, start_pfn, nr_pages,
 				  MMOP_ONLINE_MOVABLE, default_zone);
 out:
 	len += sysfs_emit_at(buf, len, "\n");
@@ -634,7 +642,8 @@ int register_memory(struct memory_block *memory)
 }
 
 static int init_memory_block(unsigned long block_id, unsigned long state,
-			     unsigned long nr_vmemmap_pages)
+			     unsigned long nr_vmemmap_pages,
+			     struct memory_group *group)
 {
 	struct memory_block *mem;
 	int ret = 0;
@@ -652,6 +661,12 @@ static int init_memory_block(unsigned long block_id, unsigned long state,
 	mem->state = state;
 	mem->nid = NUMA_NO_NODE;
 	mem->nr_vmemmap_pages = nr_vmemmap_pages;
+	INIT_LIST_HEAD(&mem->group_next);
+
+	if (group) {
+		mem->group = group;
+		list_add(&mem->group_next, &group->memory_blocks);
+	}
 
 	ret = register_memory(mem);
 
@@ -671,7 +686,7 @@ static int add_memory_block(unsigned long base_section_nr)
 	if (section_count == 0)
 		return 0;
 	return init_memory_block(memory_block_id(base_section_nr),
-				 MEM_ONLINE, 0);
+				 MEM_ONLINE, 0,  NULL);
 }
 
 static void unregister_memory(struct memory_block *memory)
@@ -681,6 +696,11 @@ static void unregister_memory(struct memory_block *memory)
 
 	WARN_ON(xa_erase(&memory_blocks, memory->dev.id) == NULL);
 
+	if (memory->group) {
+		list_del(&memory->group_next);
+		memory->group = NULL;
+	}
+
 	/* drop the ref. we got via find_memory_block() */
 	put_device(&memory->dev);
 	device_unregister(&memory->dev);
@@ -694,7 +714,8 @@ static void unregister_memory(struct memory_block *memory)
  * Called under device_hotplug_lock.
  */
 int create_memory_block_devices(unsigned long start, unsigned long size,
-				unsigned long vmemmap_pages)
+				unsigned long vmemmap_pages,
+				struct memory_group *group)
 {
 	const unsigned long start_block_id = pfn_to_block_id(PFN_DOWN(start));
 	unsigned long end_block_id = pfn_to_block_id(PFN_DOWN(start + size));
@@ -707,7 +728,8 @@ int create_memory_block_devices(unsigned long start, unsigned long size,
 		return -EINVAL;
 
 	for (block_id = start_block_id; block_id != end_block_id; block_id++) {
-		ret = init_memory_block(block_id, MEM_OFFLINE, vmemmap_pages);
+		ret = init_memory_block(block_id, MEM_OFFLINE, vmemmap_pages,
+					group);
 		if (ret)
 			break;
 	}
@@ -891,3 +913,164 @@ int for_each_memory_block(void *arg, walk_memory_blocks_func_t func)
 	return bus_for_each_dev(&memory_subsys, NULL, &cb_data,
 				for_each_memory_block_cb);
 }
+
+/*
+ * This is an internal helper to unify allocation and initialization of
+ * memory groups. Note that the passed memory group will be copied to a
+ * dynamically allocated memory group. After this call, the passed
+ * memory group should no longer be used.
+ */
+static int memory_group_register(struct memory_group group)
+{
+	struct memory_group *new_group;
+	uint32_t mgid;
+	int ret;
+
+	if (!node_possible(group.nid))
+		return -EINVAL;
+
+	new_group = kzalloc(sizeof(group), GFP_KERNEL);
+	if (!new_group)
+		return -ENOMEM;
+	*new_group = group;
+	INIT_LIST_HEAD(&new_group->memory_blocks);
+
+	ret = xa_alloc(&memory_groups, &mgid, new_group, xa_limit_31b,
+		       GFP_KERNEL);
+	if (ret) {
+		kfree(new_group);
+		return ret;
+	} else if (group.is_dynamic) {
+		xa_set_mark(&memory_groups, mgid, MEMORY_GROUP_MARK_DYNAMIC);
+	}
+	return mgid;
+}
+
+/**
+ * memory_group_register_static() - Register a static memory group.
+ * @nid: The node id.
+ * @max_pages: The maximum number of pages we'll have in this static memory
+ *	       group.
+ *
+ * Register a new static memory group and return the memory group id.
+ * All memory in the group belongs to a single unit, such as a DIMM. All
+ * memory belonging to a static memory group is added in one go to be removed
+ * in one go -- it's static.
+ *
+ * Returns an error if out of memory, if the node id is invalid, if no new
+ * memory groups can be registered, or if max_pages is invalid (0). Otherwise,
+ * returns the new memory group id.
+ */
+int memory_group_register_static(int nid, unsigned long max_pages)
+{
+	struct memory_group group = {
+		.nid = nid,
+		.s = {
+			.max_pages = max_pages,
+		},
+	};
+
+	if (!max_pages)
+		return -EINVAL;
+	return memory_group_register(group);
+}
+EXPORT_SYMBOL_GPL(memory_group_register_static);
+
+/**
+ * memory_group_register_dynamic() - Register a dynamic memory group.
+ * @nid: The node id.
+ * @unit_pages: Unit in pages in which is memory added/removed in this dynamic
+ *		memory group.
+ *
+ * Register a new dynamic memory group and return the memory group id.
+ * Memory within a dynamic memory group is added/removed dynamically
+ * in unit_pages.
+ *
+ * Returns an error if out of memory, if the node id is invalid, if no new
+ * memory groups can be registered, or if unit_pages is invalid (0, not a
+ * power of two, smaller than a single memory block). Otherwise, returns the
+ * new memory group id.
+ */
+int memory_group_register_dynamic(int nid, unsigned long unit_pages)
+{
+	struct memory_group group = {
+		.nid = nid,
+		.is_dynamic = true,
+		.d = {
+			.unit_pages = unit_pages,
+		},
+	};
+
+	if (!unit_pages || !is_power_of_2(unit_pages) ||
+	    unit_pages < PHYS_PFN(memory_block_size_bytes()))
+		return -EINVAL;
+	return memory_group_register(group);
+}
+EXPORT_SYMBOL_GPL(memory_group_register_dynamic);
+
+/**
+ * memory_group_unregister() - Unregister a memory group.
+ * @mgid: the memory group id
+ *
+ * Unregister a memory group. If any memory block still belongs to this
+ * memory group, unregistering will fail.
+ *
+ * Returns -EINVAL if the memory group id is invalid, returns -EBUSY if some
+ * memory blocks still belong to this memory group and returns 0 if
+ * unregistering succeeded.
+ */
+int memory_group_unregister(int mgid)
+{
+	struct memory_group *group;
+
+	if (mgid < 0)
+		return -EINVAL;
+
+	group = xa_load(&memory_groups, mgid);
+	if (!group)
+		return -EINVAL;
+	if (!list_empty(&group->memory_blocks))
+		return -EBUSY;
+	xa_erase(&memory_groups, mgid);
+	kfree(group);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(memory_group_unregister);
+
+/*
+ * This is an internal helper only to be used in core memory hotplug code to
+ * lookup a memory group. We don't care about locking, as we don't expect a
+ * memory group to get unregistered while adding memory to it -- because
+ * the group and the memory is managed by the same driver.
+ */
+struct memory_group *memory_group_find_by_id(int mgid)
+{
+	return xa_load(&memory_groups, mgid);
+}
+
+/*
+ * This is an internal helper only to be used in core memory hotplug code to
+ * walk all dynamic memory groups excluding a given memory group, either
+ * belonging to a specific node, or belonging to any node.
+ */
+int walk_dynamic_memory_groups(int nid, walk_memory_groups_func_t func,
+			       struct memory_group *excluded, void *arg)
+{
+	struct memory_group *group;
+	unsigned long index;
+	int ret = 0;
+
+	xa_for_each_marked(&memory_groups, index, group,
+			   MEMORY_GROUP_MARK_DYNAMIC) {
+		if (group == excluded)
+			continue;
+#ifdef CONFIG_NUMA
+		if (nid != NUMA_NO_NODE && group->nid != nid)
+			continue;
+#endif /* CONFIG_NUMA */
+		ret = func(group, arg);
+		if (ret)
+			break;
+	}
+	return ret;
+}
diff --git a/drivers/base/node.c b/drivers/base/node.c
index be16bbff11cc..c56d34f8158f 100644
--- a/drivers/base/node.c
+++ b/drivers/base/node.c
@@ -785,8 +785,6 @@ int unregister_cpu_under_node(unsigned int cpu, unsigned int nid)
 #ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
 static int __ref get_nid_for_pfn(unsigned long pfn)
 {
-	if (!pfn_valid_within(pfn))
-		return -1;
 #ifdef CONFIG_DEFERRED_STRUCT_PAGE_INIT
 	if (system_state < SYSTEM_RUNNING)
 		return early_pfn_to_nid(pfn);
diff --git a/drivers/base/power/main.c b/drivers/base/power/main.c
index d568772152c2..cbea78e79f3d 100644
--- a/drivers/base/power/main.c
+++ b/drivers/base/power/main.c
@@ -1642,7 +1642,7 @@ static int __device_suspend(struct device *dev, pm_message_t state, bool async)
 	}
 
 	dev->power.may_skip_resume = true;
-	dev->power.must_resume = false;
+	dev->power.must_resume = !dev_pm_test_driver_flags(dev, DPM_FLAG_MAY_SKIP_RESUME);
 
 	dpm_watchdog_set(&wd, dev);
 	device_lock(dev);
diff --git a/drivers/base/power/wakeirq.c b/drivers/base/power/wakeirq.c
index 3bad3266a2ad..b91a3a9bf9f6 100644
--- a/drivers/base/power/wakeirq.c
+++ b/drivers/base/power/wakeirq.c
@@ -12,14 +12,11 @@
 /**
  * dev_pm_attach_wake_irq - Attach device interrupt as a wake IRQ
  * @dev: Device entry
- * @irq: Device wake-up capable interrupt
  * @wirq: Wake irq specific data
  *
- * Internal function to attach either a device IO interrupt or a
- * dedicated wake-up interrupt as a wake IRQ.
+ * Internal function to attach a dedicated wake-up interrupt as a wake IRQ.
  */
-static int dev_pm_attach_wake_irq(struct device *dev, int irq,
-				  struct wake_irq *wirq)
+static int dev_pm_attach_wake_irq(struct device *dev, struct wake_irq *wirq)
 {
 	unsigned long flags;
 
@@ -65,7 +62,7 @@ int dev_pm_set_wake_irq(struct device *dev, int irq)
 	wirq->dev = dev;
 	wirq->irq = irq;
 
-	err = dev_pm_attach_wake_irq(dev, irq, wirq);
+	err = dev_pm_attach_wake_irq(dev, wirq);
 	if (err)
 		kfree(wirq);
 
@@ -196,7 +193,7 @@ int dev_pm_set_dedicated_wake_irq(struct device *dev, int irq)
 	if (err)
 		goto err_free_name;
 
-	err = dev_pm_attach_wake_irq(dev, irq, wirq);
+	err = dev_pm_attach_wake_irq(dev, wirq);
 	if (err)
 		goto err_free_irq;
 
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index fa1c298a8cfb..7bf4686af774 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -2111,18 +2111,6 @@ int loop_register_transfer(struct loop_func_table *funcs)
 	return 0;
 }
 
-static int unregister_transfer_cb(int id, void *ptr, void *data)
-{
-	struct loop_device *lo = ptr;
-	struct loop_func_table *xfer = data;
-
-	mutex_lock(&lo->lo_mutex);
-	if (lo->lo_encryption == xfer)
-		loop_release_xfer(lo);
-	mutex_unlock(&lo->lo_mutex);
-	return 0;
-}
-
 int loop_unregister_transfer(int number)
 {
 	unsigned int n = number;
@@ -2130,9 +2118,20 @@ int loop_unregister_transfer(int number)
 
 	if (n == 0 || n >= MAX_LO_CRYPT || (xfer = xfer_funcs[n]) == NULL)
 		return -EINVAL;
+	/*
+	 * This function is called from only cleanup_cryptoloop().
+	 * Given that each loop device that has a transfer enabled holds a
+	 * reference to the module implementing it we should never get here
+	 * with a transfer that is set (unless forced module unloading is
+	 * requested). Thus, check module's refcount and warn if this is
+	 * not a clean unloading.
+	 */
+#ifdef CONFIG_MODULE_UNLOAD
+	if (xfer->owner && module_refcount(xfer->owner) != -1)
+		pr_err("Danger! Unregistering an in use transfer function.\n");
+#endif
 
 	xfer_funcs[n] = NULL;
-	idr_for_each(&loop_index_idr, &unregister_transfer_cb, xfer);
 	return 0;
 }
 
@@ -2323,8 +2322,9 @@ static int loop_add(int i)
 	} else {
 		err = idr_alloc(&loop_index_idr, lo, 0, 0, GFP_KERNEL);
 	}
+	mutex_unlock(&loop_ctl_mutex);
 	if (err < 0)
-		goto out_unlock;
+		goto out_free_dev;
 	i = err;
 
 	err = -ENOMEM;
@@ -2393,15 +2393,19 @@ static int loop_add(int i)
 	disk->events		= DISK_EVENT_MEDIA_CHANGE;
 	disk->event_flags	= DISK_EVENT_FLAG_UEVENT;
 	sprintf(disk->disk_name, "loop%d", i);
+	/* Make this loop device reachable from pathname. */
 	add_disk(disk);
+	/* Show this loop device. */
+	mutex_lock(&loop_ctl_mutex);
+	lo->idr_visible = true;
 	mutex_unlock(&loop_ctl_mutex);
 	return i;
 
 out_cleanup_tags:
 	blk_mq_free_tag_set(&lo->tag_set);
 out_free_idr:
+	mutex_lock(&loop_ctl_mutex);
 	idr_remove(&loop_index_idr, i);
-out_unlock:
 	mutex_unlock(&loop_ctl_mutex);
 out_free_dev:
 	kfree(lo);
@@ -2411,9 +2415,14 @@ out:
 
 static void loop_remove(struct loop_device *lo)
 {
+	/* Make this loop device unreachable from pathname. */
 	del_gendisk(lo->lo_disk);
 	blk_cleanup_disk(lo->lo_disk);
 	blk_mq_free_tag_set(&lo->tag_set);
+	mutex_lock(&loop_ctl_mutex);
+	idr_remove(&loop_index_idr, lo->lo_number);
+	mutex_unlock(&loop_ctl_mutex);
+	/* There is no route which can find this loop device. */
 	mutex_destroy(&lo->lo_mutex);
 	kfree(lo);
 }
@@ -2437,31 +2446,40 @@ static int loop_control_remove(int idx)
 		return -EINVAL;
 	}
 		
+	/* Hide this loop device for serialization. */
 	ret = mutex_lock_killable(&loop_ctl_mutex);
 	if (ret)
 		return ret;
-
 	lo = idr_find(&loop_index_idr, idx);
-	if (!lo) {
+	if (!lo || !lo->idr_visible)
 		ret = -ENODEV;
-		goto out_unlock_ctrl;
-	}
+	else
+		lo->idr_visible = false;
+	mutex_unlock(&loop_ctl_mutex);
+	if (ret)
+		return ret;
 
+	/* Check whether this loop device can be removed. */
 	ret = mutex_lock_killable(&lo->lo_mutex);
 	if (ret)
-		goto out_unlock_ctrl;
+		goto mark_visible;
 	if (lo->lo_state != Lo_unbound ||
 	    atomic_read(&lo->lo_refcnt) > 0) {
 		mutex_unlock(&lo->lo_mutex);
 		ret = -EBUSY;
-		goto out_unlock_ctrl;
+		goto mark_visible;
 	}
+	/* Mark this loop device no longer open()-able. */
 	lo->lo_state = Lo_deleting;
 	mutex_unlock(&lo->lo_mutex);
 
-	idr_remove(&loop_index_idr, lo->lo_number);
 	loop_remove(lo);
-out_unlock_ctrl:
+	return 0;
+
+mark_visible:
+	/* Show this loop device again. */
+	mutex_lock(&loop_ctl_mutex);
+	lo->idr_visible = true;
 	mutex_unlock(&loop_ctl_mutex);
 	return ret;
 }
@@ -2475,7 +2493,8 @@ static int loop_control_get_free(int idx)
 	if (ret)
 		return ret;
 	idr_for_each_entry(&loop_index_idr, lo, id) {
-		if (lo->lo_state == Lo_unbound)
+		/* Hitting a race results in creating a new loop device which is harmless. */
+		if (lo->idr_visible && data_race(lo->lo_state) == Lo_unbound)
 			goto found;
 	}
 	mutex_unlock(&loop_ctl_mutex);
@@ -2591,10 +2610,14 @@ static void __exit loop_exit(void)
 	unregister_blkdev(LOOP_MAJOR, "loop");
 	misc_deregister(&loop_misc);
 
-	mutex_lock(&loop_ctl_mutex);
+	/*
+	 * There is no need to use loop_ctl_mutex here, for nobody else can
+	 * access loop_index_idr when this module is unloading (unless forced
+	 * module unloading is requested). If this is not a clean unloading,
+	 * we have no means to avoid kernel crash.
+	 */
 	idr_for_each_entry(&loop_index_idr, lo, id)
 		loop_remove(lo);
-	mutex_unlock(&loop_ctl_mutex);
 
 	idr_destroy(&loop_index_idr);
 }
diff --git a/drivers/block/loop.h b/drivers/block/loop.h
index 1988899db63a..04c88dd6eabd 100644
--- a/drivers/block/loop.h
+++ b/drivers/block/loop.h
@@ -68,6 +68,7 @@ struct loop_device {
 	struct blk_mq_tag_set	tag_set;
 	struct gendisk		*lo_disk;
 	struct mutex		lo_mutex;
+	bool			idr_visible;
 };
 
 struct loop_cmd {
diff --git a/drivers/block/n64cart.c b/drivers/block/n64cart.c
index c84be0028f63..26798da661bd 100644
--- a/drivers/block/n64cart.c
+++ b/drivers/block/n64cart.c
@@ -129,8 +129,8 @@ static int __init n64cart_probe(struct platform_device *pdev)
 	}
 
 	reg_base = devm_platform_ioremap_resource(pdev, 0);
-	if (!reg_base)
-		return -EINVAL;
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
 
 	disk = blk_alloc_disk(NUMA_NO_NODE);
 	if (!disk)
diff --git a/drivers/clk/qcom/gcc-sm6350.c b/drivers/clk/qcom/gcc-sm6350.c
index 053089f83677..3236706771b1 100644
--- a/drivers/clk/qcom/gcc-sm6350.c
+++ b/drivers/clk/qcom/gcc-sm6350.c
@@ -176,10 +176,6 @@ static const struct parent_map gcc_parent_map_2[] = {
 	{ P_GPLL0_OUT_ODD, 2 },
 };
 
-static const struct clk_parent_data gcc_parent_data_2[] = {
-	{ .fw_name = "bi_tcxo" },
-	{ .hw = &gpll0_out_odd.clkr.hw },
-};
 static const struct clk_parent_data gcc_parent_data_2_ao[] = {
 	{ .fw_name = "bi_tcxo_ao" },
 	{ .hw = &gpll0_out_odd.clkr.hw },
diff --git a/drivers/clk/ux500/u8500_of_clk.c b/drivers/clk/ux500/u8500_of_clk.c
index 0aedd42fad52..528c5bb397cc 100644
--- a/drivers/clk/ux500/u8500_of_clk.c
+++ b/drivers/clk/ux500/u8500_of_clk.c
@@ -99,10 +99,11 @@ static void u8500_clk_init(struct device_node *np)
 	if (fw_version != NULL) {
 		switch (fw_version->project) {
 		case PRCMU_FW_PROJECT_U8500_C2:
-		case PRCMU_FW_PROJECT_U8500_MBL:
+		case PRCMU_FW_PROJECT_U8500_SSG1:
 		case PRCMU_FW_PROJECT_U8520:
 		case PRCMU_FW_PROJECT_U8420:
 		case PRCMU_FW_PROJECT_U8420_SYSCLK:
+		case PRCMU_FW_PROJECT_U8500_SSG2:
 			sgaclk_parent = "soc0_pll";
 			break;
 		default:
diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index a5c5f70acfc9..954749afb5fe 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -133,6 +133,18 @@ config ARM_MEDIATEK_CPUFREQ
 	help
 	  This adds the CPUFreq driver support for MediaTek SoCs.
 
+config ARM_MEDIATEK_CPUFREQ_HW
+	tristate "MediaTek CPUFreq HW driver"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
+	default m
+	help
+	  Support for the CPUFreq HW driver.
+	  Some MediaTek chipsets have a HW engine to offload the steps
+	  necessary for changing the frequency of the CPUs. Firmware loaded
+	  in this engine exposes a programming interface to the OS.
+	  The driver implements the cpufreq interface for this HW engine.
+	  Say Y if you want to support CPUFreq HW.
+
 config ARM_OMAP2PLUS_CPUFREQ
 	bool "TI OMAP2+"
 	depends on ARCH_OMAP2PLUS
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index 27d3bd7ea9d4..48ee5859030c 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -56,6 +56,7 @@ obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
 obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ)	+= mediatek-cpufreq.o
+obj-$(CONFIG_ARM_MEDIATEK_CPUFREQ_HW)	+= mediatek-cpufreq-hw.o
 obj-$(CONFIG_MACH_MVEBU_V7)		+= mvebu-cpufreq.o
 obj-$(CONFIG_ARM_OMAP2PLUS_CPUFREQ)	+= omap-cpufreq.o
 obj-$(CONFIG_ARM_PXA2xx_CPUFREQ)	+= pxa2xx-cpufreq.o
diff --git a/drivers/cpufreq/acpi-cpufreq.c b/drivers/cpufreq/acpi-cpufreq.c
index b49612895c78..28467d83c745 100644
--- a/drivers/cpufreq/acpi-cpufreq.c
+++ b/drivers/cpufreq/acpi-cpufreq.c
@@ -889,6 +889,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	policy->fast_switch_possible = !acpi_pstate_strict &&
 		!(policy_is_shared(policy) && policy->shared_type != CPUFREQ_SHARED_TYPE_ANY);
 
+	if (perf->states[0].core_frequency * 1000 != freq_table[0].frequency)
+		pr_warn(FW_WARN "P-state 0 is not max freq\n");
+
 	return result;
 
 err_unreg:
@@ -918,16 +921,6 @@ static int acpi_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void acpi_cpufreq_cpu_ready(struct cpufreq_policy *policy)
-{
-	struct acpi_processor_performance *perf = per_cpu_ptr(acpi_perf_data,
-							      policy->cpu);
-	unsigned int freq = policy->freq_table[0].frequency;
-
-	if (perf->states[0].core_frequency * 1000 != freq)
-		pr_warn(FW_WARN "P-state 0 is not max freq\n");
-}
-
 static int acpi_cpufreq_resume(struct cpufreq_policy *policy)
 {
 	struct acpi_cpufreq_data *data = policy->driver_data;
@@ -955,7 +948,6 @@ static struct cpufreq_driver acpi_cpufreq_driver = {
 	.bios_limit	= acpi_processor_get_bios_limit,
 	.init		= acpi_cpufreq_cpu_init,
 	.exit		= acpi_cpufreq_cpu_exit,
-	.ready		= acpi_cpufreq_cpu_ready,
 	.resume		= acpi_cpufreq_resume,
 	.name		= "acpi-cpufreq",
 	.attr		= acpi_cpufreq_attr,
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index 231e585f6ba2..ca1d103ec449 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -137,11 +137,15 @@ static const struct of_device_id blocklist[] __initconst = {
 	{ .compatible = "qcom,apq8096", },
 	{ .compatible = "qcom,msm8996", },
 	{ .compatible = "qcom,qcs404", },
+	{ .compatible = "qcom,sa8155p" },
 	{ .compatible = "qcom,sc7180", },
 	{ .compatible = "qcom,sc7280", },
 	{ .compatible = "qcom,sc8180x", },
 	{ .compatible = "qcom,sdm845", },
+	{ .compatible = "qcom,sm6350", },
 	{ .compatible = "qcom,sm8150", },
+	{ .compatible = "qcom,sm8250", },
+	{ .compatible = "qcom,sm8350", },
 
 	{ .compatible = "st,stih407", },
 	{ .compatible = "st,stih410", },
diff --git a/drivers/cpufreq/cpufreq-dt.c b/drivers/cpufreq/cpufreq-dt.c
index ece52863ba62..8fcaba541539 100644
--- a/drivers/cpufreq/cpufreq-dt.c
+++ b/drivers/cpufreq/cpufreq-dt.c
@@ -143,8 +143,6 @@ static int cpufreq_init(struct cpufreq_policy *policy)
 		cpufreq_dt_attr[1] = &cpufreq_freq_attr_scaling_boost_freqs;
 	}
 
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-
 	return 0;
 
 out_clk_put:
@@ -184,6 +182,7 @@ static struct cpufreq_driver dt_cpufreq_driver = {
 	.exit = cpufreq_exit,
 	.online = cpufreq_online,
 	.offline = cpufreq_offline,
+	.register_em = cpufreq_register_em_with_opp,
 	.name = "cpufreq-dt",
 	.attr = cpufreq_dt_attr,
 	.suspend = cpufreq_generic_suspend,
diff --git a/drivers/cpufreq/cpufreq.c b/drivers/cpufreq/cpufreq.c
index 06c526d66dd3..5782b15a8caa 100644
--- a/drivers/cpufreq/cpufreq.c
+++ b/drivers/cpufreq/cpufreq.c
@@ -1491,6 +1491,19 @@ static int cpufreq_online(unsigned int cpu)
 		write_lock_irqsave(&cpufreq_driver_lock, flags);
 		list_add(&policy->policy_list, &cpufreq_policy_list);
 		write_unlock_irqrestore(&cpufreq_driver_lock, flags);
+
+		/*
+		 * Register with the energy model before
+		 * sched_cpufreq_governor_change() is called, which will result
+		 * in rebuilding of the sched domains, which should only be done
+		 * once the energy model is properly initialized for the policy
+		 * first.
+		 *
+		 * Also, this should be called before the policy is registered
+		 * with cooling framework.
+		 */
+		if (cpufreq_driver->register_em)
+			cpufreq_driver->register_em(policy);
 	}
 
 	ret = cpufreq_init_policy(policy);
@@ -1504,10 +1517,6 @@ static int cpufreq_online(unsigned int cpu)
 
 	kobject_uevent(&policy->kobj, KOBJ_ADD);
 
-	/* Callback for handling stuff after policy is ready */
-	if (cpufreq_driver->ready)
-		cpufreq_driver->ready(policy);
-
 	if (cpufreq_thermal_control_enabled(cpufreq_driver))
 		policy->cdev = of_cpufreq_cooling_register(policy);
 
diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c
index 5bf5fc759881..90beb26ed34e 100644
--- a/drivers/cpufreq/imx6q-cpufreq.c
+++ b/drivers/cpufreq/imx6q-cpufreq.c
@@ -192,7 +192,6 @@ static int imx6q_cpufreq_init(struct cpufreq_policy *policy)
 	policy->clk = clks[ARM].clk;
 	cpufreq_generic_init(policy, freq_table, transition_latency);
 	policy->suspend_freq = max_freq;
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
 
 	return 0;
 }
@@ -204,6 +203,7 @@ static struct cpufreq_driver imx6q_cpufreq_driver = {
 	.target_index = imx6q_set_target,
 	.get = cpufreq_generic_get,
 	.init = imx6q_cpufreq_init,
+	.register_em = cpufreq_register_em_with_opp,
 	.name = "imx6q-cpufreq",
 	.attr = cpufreq_generic_attr,
 	.suspend = cpufreq_generic_suspend,
diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c
index b4ffe6c8a0d0..1097f826ad70 100644
--- a/drivers/cpufreq/intel_pstate.c
+++ b/drivers/cpufreq/intel_pstate.c
@@ -32,7 +32,6 @@
 #include <asm/cpu_device_id.h>
 #include <asm/cpufeature.h>
 #include <asm/intel-family.h>
-#include "../drivers/thermal/intel/thermal_interrupt.h"
 
 #define INTEL_PSTATE_SAMPLING_INTERVAL	(10 * NSEC_PER_MSEC)
 
@@ -220,7 +219,6 @@ struct global_params {
  * @sched_flags:	Store scheduler flags for possible cross CPU update
  * @hwp_boost_min:	Last HWP boosted min performance
  * @suspended:		Whether or not the driver has been suspended.
- * @hwp_notify_work:	workqueue for HWP notifications.
  *
  * This structure stores per CPU instance data for all CPUs.
  */
@@ -259,7 +257,6 @@ struct cpudata {
 	unsigned int sched_flags;
 	u32 hwp_boost_min;
 	bool suspended;
-	struct delayed_work hwp_notify_work;
 };
 
 static struct cpudata **all_cpu_data;
@@ -271,6 +268,7 @@ static struct cpudata **all_cpu_data;
  * @get_min:		Callback to get minimum P state
  * @get_turbo:		Callback to get turbo P state
  * @get_scaling:	Callback to get frequency scaling factor
+ * @get_cpu_scaling:	Get frequency scaling factor for a given cpu
  * @get_aperf_mperf_shift: Callback to get the APERF vs MPERF frequency difference
  * @get_val:		Callback to convert P state to actual MSR write value
  * @get_vid:		Callback to get VID data for Atom platforms
@@ -284,6 +282,7 @@ struct pstate_funcs {
 	int (*get_min)(void);
 	int (*get_turbo)(void);
 	int (*get_scaling)(void);
+	int (*get_cpu_scaling)(int cpu);
 	int (*get_aperf_mperf_shift)(void);
 	u64 (*get_val)(struct cpudata*, int pstate);
 	void (*get_vid)(struct cpudata *);
@@ -387,6 +386,15 @@ static int intel_pstate_get_cppc_guaranteed(int cpu)
 	return cppc_perf.nominal_perf;
 }
 
+static u32 intel_pstate_cppc_nominal(int cpu)
+{
+	u64 nominal_perf;
+
+	if (cppc_get_nominal_perf(cpu, &nominal_perf))
+		return 0;
+
+	return nominal_perf;
+}
 #else /* CONFIG_ACPI_CPPC_LIB */
 static inline void intel_pstate_set_itmt_prio(int cpu)
 {
@@ -473,20 +481,6 @@ static void intel_pstate_exit_perf_limits(struct cpufreq_policy *policy)
 
 	acpi_processor_unregister_performance(policy->cpu);
 }
-
-static bool intel_pstate_cppc_perf_valid(u32 perf, struct cppc_perf_caps *caps)
-{
-	return perf && perf <= caps->highest_perf && perf >= caps->lowest_perf;
-}
-
-static bool intel_pstate_cppc_perf_caps(struct cpudata *cpu,
-					struct cppc_perf_caps *caps)
-{
-	if (cppc_get_perf_caps(cpu->cpu, caps))
-		return false;
-
-	return caps->highest_perf && caps->lowest_perf <= caps->highest_perf;
-}
 #else /* CONFIG_ACPI */
 static inline void intel_pstate_init_acpi_perf_limits(struct cpufreq_policy *policy)
 {
@@ -509,15 +503,8 @@ static inline int intel_pstate_get_cppc_guaranteed(int cpu)
 }
 #endif /* CONFIG_ACPI_CPPC_LIB */
 
-static void intel_pstate_hybrid_hwp_perf_ctl_parity(struct cpudata *cpu)
-{
-	pr_debug("CPU%d: Using PERF_CTL scaling for HWP\n", cpu->cpu);
-
-	cpu->pstate.scaling = cpu->pstate.perf_ctl_scaling;
-}
-
 /**
- * intel_pstate_hybrid_hwp_calibrate - Calibrate HWP performance levels.
+ * intel_pstate_hybrid_hwp_adjust - Calibrate HWP performance levels.
  * @cpu: Target CPU.
  *
  * On hybrid processors, HWP may expose more performance levels than there are
@@ -525,115 +512,46 @@ static void intel_pstate_hybrid_hwp_perf_ctl_parity(struct cpudata *cpu)
  * scaling factor between HWP performance levels and CPU frequency will be less
  * than the scaling factor between P-state values and CPU frequency.
  *
- * In that case, the scaling factor between HWP performance levels and CPU
- * frequency needs to be determined which can be done with the help of the
- * observation that certain HWP performance levels should correspond to certain
- * P-states, like for example the HWP highest performance should correspond
- * to the maximum turbo P-state of the CPU.
+ * In that case, adjust the CPU parameters used in computations accordingly.
  */
-static void intel_pstate_hybrid_hwp_calibrate(struct cpudata *cpu)
+static void intel_pstate_hybrid_hwp_adjust(struct cpudata *cpu)
 {
 	int perf_ctl_max_phys = cpu->pstate.max_pstate_physical;
 	int perf_ctl_scaling = cpu->pstate.perf_ctl_scaling;
 	int perf_ctl_turbo = pstate_funcs.get_turbo();
 	int turbo_freq = perf_ctl_turbo * perf_ctl_scaling;
-	int perf_ctl_max = pstate_funcs.get_max();
-	int max_freq = perf_ctl_max * perf_ctl_scaling;
-	int scaling = INT_MAX;
-	int freq;
+	int scaling = cpu->pstate.scaling;
 
 	pr_debug("CPU%d: perf_ctl_max_phys = %d\n", cpu->cpu, perf_ctl_max_phys);
-	pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, perf_ctl_max);
+	pr_debug("CPU%d: perf_ctl_max = %d\n", cpu->cpu, pstate_funcs.get_max());
 	pr_debug("CPU%d: perf_ctl_turbo = %d\n", cpu->cpu, perf_ctl_turbo);
 	pr_debug("CPU%d: perf_ctl_scaling = %d\n", cpu->cpu, perf_ctl_scaling);
-
 	pr_debug("CPU%d: HWP_CAP guaranteed = %d\n", cpu->cpu, cpu->pstate.max_pstate);
 	pr_debug("CPU%d: HWP_CAP highest = %d\n", cpu->cpu, cpu->pstate.turbo_pstate);
-
-#ifdef CONFIG_ACPI
-	if (IS_ENABLED(CONFIG_ACPI_CPPC_LIB)) {
-		struct cppc_perf_caps caps;
-
-		if (intel_pstate_cppc_perf_caps(cpu, &caps)) {
-			if (intel_pstate_cppc_perf_valid(caps.nominal_perf, &caps)) {
-				pr_debug("CPU%d: Using CPPC nominal\n", cpu->cpu);
-
-				/*
-				 * If the CPPC nominal performance is valid, it
-				 * can be assumed to correspond to cpu_khz.
-				 */
-				if (caps.nominal_perf == perf_ctl_max_phys) {
-					intel_pstate_hybrid_hwp_perf_ctl_parity(cpu);
-					return;
-				}
-				scaling = DIV_ROUND_UP(cpu_khz, caps.nominal_perf);
-			} else if (intel_pstate_cppc_perf_valid(caps.guaranteed_perf, &caps)) {
-				pr_debug("CPU%d: Using CPPC guaranteed\n", cpu->cpu);
-
-				/*
-				 * If the CPPC guaranteed performance is valid,
-				 * it can be assumed to correspond to max_freq.
-				 */
-				if (caps.guaranteed_perf == perf_ctl_max) {
-					intel_pstate_hybrid_hwp_perf_ctl_parity(cpu);
-					return;
-				}
-				scaling = DIV_ROUND_UP(max_freq, caps.guaranteed_perf);
-			}
-		}
-	}
-#endif
-	/*
-	 * If using the CPPC data to compute the HWP-to-frequency scaling factor
-	 * doesn't work, use the HWP_CAP gauranteed perf for this purpose with
-	 * the assumption that it corresponds to max_freq.
-	 */
-	if (scaling > perf_ctl_scaling) {
-		pr_debug("CPU%d: Using HWP_CAP guaranteed\n", cpu->cpu);
-
-		if (cpu->pstate.max_pstate == perf_ctl_max) {
-			intel_pstate_hybrid_hwp_perf_ctl_parity(cpu);
-			return;
-		}
-		scaling = DIV_ROUND_UP(max_freq, cpu->pstate.max_pstate);
-		if (scaling > perf_ctl_scaling) {
-			/*
-			 * This should not happen, because it would mean that
-			 * the number of HWP perf levels was less than the
-			 * number of P-states, so use the PERF_CTL scaling in
-			 * that case.
-			 */
-			pr_debug("CPU%d: scaling (%d) out of range\n", cpu->cpu,
-				scaling);
-
-			intel_pstate_hybrid_hwp_perf_ctl_parity(cpu);
-			return;
-		}
-	}
+	pr_debug("CPU%d: HWP-to-frequency scaling factor: %d\n", cpu->cpu, scaling);
 
 	/*
-	 * If the product of the HWP performance scaling factor obtained above
-	 * and the HWP_CAP highest performance is greater than the maximum turbo
-	 * frequency corresponding to the pstate_funcs.get_turbo() return value,
-	 * the scaling factor is too high, so recompute it so that the HWP_CAP
-	 * highest performance corresponds to the maximum turbo frequency.
+	 * If the product of the HWP performance scaling factor and the HWP_CAP
+	 * highest performance is greater than the maximum turbo frequency
+	 * corresponding to the pstate_funcs.get_turbo() return value, the
+	 * scaling factor is too high, so recompute it to make the HWP_CAP
+	 * highest performance correspond to the maximum turbo frequency.
 	 */
 	if (turbo_freq < cpu->pstate.turbo_pstate * scaling) {
-		pr_debug("CPU%d: scaling too high (%d)\n", cpu->cpu, scaling);
-
 		cpu->pstate.turbo_freq = turbo_freq;
 		scaling = DIV_ROUND_UP(turbo_freq, cpu->pstate.turbo_pstate);
-	}
-
-	cpu->pstate.scaling = scaling;
+		cpu->pstate.scaling = scaling;
 
-	pr_debug("CPU%d: HWP-to-frequency scaling factor: %d\n", cpu->cpu, scaling);
+		pr_debug("CPU%d: refined HWP-to-frequency scaling factor: %d\n",
+			 cpu->cpu, scaling);
+	}
 
 	cpu->pstate.max_freq = rounddown(cpu->pstate.max_pstate * scaling,
 					 perf_ctl_scaling);
 
-	freq = perf_ctl_max_phys * perf_ctl_scaling;
-	cpu->pstate.max_pstate_physical = DIV_ROUND_UP(freq, scaling);
+	cpu->pstate.max_pstate_physical =
+			DIV_ROUND_UP(perf_ctl_max_phys * perf_ctl_scaling,
+				     scaling);
 
 	cpu->pstate.min_freq = cpu->pstate.min_pstate * perf_ctl_scaling;
 	/*
@@ -1628,40 +1546,6 @@ static void intel_pstate_sysfs_hide_hwp_dynamic_boost(void)
 
 /************************** sysfs end ************************/
 
-static void intel_pstate_notify_work(struct work_struct *work)
-{
-	mutex_lock(&intel_pstate_driver_lock);
-	cpufreq_update_policy(smp_processor_id());
-	wrmsrl(MSR_HWP_STATUS, 0);
-	mutex_unlock(&intel_pstate_driver_lock);
-}
-
-void notify_hwp_interrupt(void)
-{
-	unsigned int this_cpu = smp_processor_id();
-	struct cpudata *cpudata;
-	u64 value;
-
-	if (!hwp_active || !boot_cpu_has(X86_FEATURE_HWP_NOTIFY))
-		return;
-
-	rdmsrl(MSR_HWP_STATUS, value);
-	if (!(value & 0x01))
-		return;
-
-	cpudata = all_cpu_data[this_cpu];
-	schedule_delayed_work_on(this_cpu, &cpudata->hwp_notify_work, msecs_to_jiffies(10));
-}
-
-static void intel_pstate_enable_hwp_interrupt(struct cpudata *cpudata)
-{
-	/* Enable HWP notification interrupt for guaranteed performance change */
-	if (boot_cpu_has(X86_FEATURE_HWP_NOTIFY)) {
-		INIT_DELAYED_WORK(&cpudata->hwp_notify_work, intel_pstate_notify_work);
-		wrmsrl_on_cpu(cpudata->cpu, MSR_HWP_INTERRUPT, 0x01);
-	}
-}
-
 static void intel_pstate_hwp_enable(struct cpudata *cpudata)
 {
 	/* First disable HWP notification interrupt as we don't process them */
@@ -1671,8 +1555,6 @@ static void intel_pstate_hwp_enable(struct cpudata *cpudata)
 	wrmsrl_on_cpu(cpudata->cpu, MSR_PM_ENABLE, 0x1);
 	if (cpudata->epp_default == -EINVAL)
 		cpudata->epp_default = intel_pstate_get_epp(cpudata, 0);
-
-	intel_pstate_enable_hwp_interrupt(cpudata);
 }
 
 static int atom_get_min_pstate(void)
@@ -1900,6 +1782,38 @@ static int knl_get_turbo_pstate(void)
 	return ret;
 }
 
+#ifdef CONFIG_ACPI_CPPC_LIB
+static u32 hybrid_ref_perf;
+
+static int hybrid_get_cpu_scaling(int cpu)
+{
+	return DIV_ROUND_UP(core_get_scaling() * hybrid_ref_perf,
+			    intel_pstate_cppc_nominal(cpu));
+}
+
+static void intel_pstate_cppc_set_cpu_scaling(void)
+{
+	u32 min_nominal_perf = U32_MAX;
+	int cpu;
+
+	for_each_present_cpu(cpu) {
+		u32 nominal_perf = intel_pstate_cppc_nominal(cpu);
+
+		if (nominal_perf && nominal_perf < min_nominal_perf)
+			min_nominal_perf = nominal_perf;
+	}
+
+	if (min_nominal_perf < U32_MAX) {
+		hybrid_ref_perf = min_nominal_perf;
+		pstate_funcs.get_cpu_scaling = hybrid_get_cpu_scaling;
+	}
+}
+#else
+static inline void intel_pstate_cppc_set_cpu_scaling(void)
+{
+}
+#endif /* CONFIG_ACPI_CPPC_LIB */
+
 static void intel_pstate_set_pstate(struct cpudata *cpu, int pstate)
 {
 	trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu);
@@ -1928,10 +1842,8 @@ static void intel_pstate_max_within_limits(struct cpudata *cpu)
 
 static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 {
-	bool hybrid_cpu = boot_cpu_has(X86_FEATURE_HYBRID_CPU);
 	int perf_ctl_max_phys = pstate_funcs.get_max_physical();
-	int perf_ctl_scaling = hybrid_cpu ? cpu_khz / perf_ctl_max_phys :
-					    pstate_funcs.get_scaling();
+	int perf_ctl_scaling = pstate_funcs.get_scaling();
 
 	cpu->pstate.min_pstate = pstate_funcs.get_min();
 	cpu->pstate.max_pstate_physical = perf_ctl_max_phys;
@@ -1940,10 +1852,13 @@ static void intel_pstate_get_cpu_pstates(struct cpudata *cpu)
 	if (hwp_active && !hwp_mode_bdw) {
 		__intel_pstate_get_hwp_cap(cpu);
 
-		if (hybrid_cpu)
-			intel_pstate_hybrid_hwp_calibrate(cpu);
-		else
+		if (pstate_funcs.get_cpu_scaling) {
+			cpu->pstate.scaling = pstate_funcs.get_cpu_scaling(cpu->cpu);
+			if (cpu->pstate.scaling != perf_ctl_scaling)
+				intel_pstate_hybrid_hwp_adjust(cpu);
+		} else {
 			cpu->pstate.scaling = perf_ctl_scaling;
+		}
 	} else {
 		cpu->pstate.scaling = perf_ctl_scaling;
 		cpu->pstate.max_pstate = pstate_funcs.get_max();
@@ -3315,6 +3230,9 @@ static int __init intel_pstate_init(void)
 			if (!default_driver)
 				default_driver = &intel_pstate;
 
+			if (boot_cpu_has(X86_FEATURE_HYBRID_CPU))
+				intel_pstate_cppc_set_cpu_scaling();
+
 			goto hwp_cpu_matched;
 		}
 	} else {
diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
new file mode 100644
index 000000000000..0cf18dd46b92
--- /dev/null
+++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
@@ -0,0 +1,308 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2020 MediaTek Inc.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/cpufreq.h>
+#include <linux/energy_model.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+
+#define LUT_MAX_ENTRIES			32U
+#define LUT_FREQ			GENMASK(11, 0)
+#define LUT_ROW_SIZE			0x4
+#define CPUFREQ_HW_STATUS		BIT(0)
+#define SVS_HW_STATUS			BIT(1)
+#define POLL_USEC			1000
+#define TIMEOUT_USEC			300000
+
+enum {
+	REG_FREQ_LUT_TABLE,
+	REG_FREQ_ENABLE,
+	REG_FREQ_PERF_STATE,
+	REG_FREQ_HW_STATE,
+	REG_EM_POWER_TBL,
+	REG_FREQ_LATENCY,
+
+	REG_ARRAY_SIZE,
+};
+
+struct mtk_cpufreq_data {
+	struct cpufreq_frequency_table *table;
+	void __iomem *reg_bases[REG_ARRAY_SIZE];
+	int nr_opp;
+};
+
+static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = {
+	[REG_FREQ_LUT_TABLE]	= 0x0,
+	[REG_FREQ_ENABLE]	= 0x84,
+	[REG_FREQ_PERF_STATE]	= 0x88,
+	[REG_FREQ_HW_STATE]	= 0x8c,
+	[REG_EM_POWER_TBL]	= 0x90,
+	[REG_FREQ_LATENCY]	= 0x110,
+};
+
+static int __maybe_unused
+mtk_cpufreq_get_cpu_power(unsigned long *mW,
+			  unsigned long *KHz, struct device *cpu_dev)
+{
+	struct mtk_cpufreq_data *data;
+	struct cpufreq_policy *policy;
+	int i;
+
+	policy = cpufreq_cpu_get_raw(cpu_dev->id);
+	if (!policy)
+		return 0;
+
+	data = policy->driver_data;
+
+	for (i = 0; i < data->nr_opp; i++) {
+		if (data->table[i].frequency < *KHz)
+			break;
+	}
+	i--;
+
+	*KHz = data->table[i].frequency;
+	*mW = readl_relaxed(data->reg_bases[REG_EM_POWER_TBL] +
+			    i * LUT_ROW_SIZE) / 1000;
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
+				       unsigned int index)
+{
+	struct mtk_cpufreq_data *data = policy->driver_data;
+
+	writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]);
+
+	return 0;
+}
+
+static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
+{
+	struct mtk_cpufreq_data *data;
+	struct cpufreq_policy *policy;
+	unsigned int index;
+
+	policy = cpufreq_cpu_get_raw(cpu);
+	if (!policy)
+		return 0;
+
+	data = policy->driver_data;
+
+	index = readl_relaxed(data->reg_bases[REG_FREQ_PERF_STATE]);
+	index = min(index, LUT_MAX_ENTRIES - 1);
+
+	return data->table[index].frequency;
+}
+
+static unsigned int mtk_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
+					       unsigned int target_freq)
+{
+	struct mtk_cpufreq_data *data = policy->driver_data;
+	unsigned int index;
+
+	index = cpufreq_table_find_index_dl(policy, target_freq);
+
+	writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]);
+
+	return policy->freq_table[index].frequency;
+}
+
+static int mtk_cpu_create_freq_table(struct platform_device *pdev,
+				     struct mtk_cpufreq_data *data)
+{
+	struct device *dev = &pdev->dev;
+	u32 temp, i, freq, prev_freq = 0;
+	void __iomem *base_table;
+
+	data->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
+				   sizeof(*data->table), GFP_KERNEL);
+	if (!data->table)
+		return -ENOMEM;
+
+	base_table = data->reg_bases[REG_FREQ_LUT_TABLE];
+
+	for (i = 0; i < LUT_MAX_ENTRIES; i++) {
+		temp = readl_relaxed(base_table + (i * LUT_ROW_SIZE));
+		freq = FIELD_GET(LUT_FREQ, temp) * 1000;
+
+		if (freq == prev_freq)
+			break;
+
+		data->table[i].frequency = freq;
+
+		dev_dbg(dev, "index=%d freq=%d\n", i, data->table[i].frequency);
+
+		prev_freq = freq;
+	}
+
+	data->table[i].frequency = CPUFREQ_TABLE_END;
+	data->nr_opp = i;
+
+	return 0;
+}
+
+static int mtk_cpu_resources_init(struct platform_device *pdev,
+				  struct cpufreq_policy *policy,
+				  const u16 *offsets)
+{
+	struct mtk_cpufreq_data *data;
+	struct device *dev = &pdev->dev;
+	void __iomem *base;
+	int ret, i;
+	int index;
+
+	data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	index = of_perf_domain_get_sharing_cpumask(policy->cpu, "performance-domains",
+						   "#performance-domain-cells",
+						   policy->cpus);
+	if (index < 0)
+		return index;
+
+	base = devm_platform_ioremap_resource(pdev, index);
+	if (IS_ERR(base))
+		return PTR_ERR(base);
+
+	for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
+		data->reg_bases[i] = base + offsets[i];
+
+	ret = mtk_cpu_create_freq_table(pdev, data);
+	if (ret) {
+		dev_info(dev, "Domain-%d failed to create freq table\n", index);
+		return ret;
+	}
+
+	policy->freq_table = data->table;
+	policy->driver_data = data;
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
+{
+	struct platform_device *pdev = cpufreq_get_driver_data();
+	int sig, pwr_hw = CPUFREQ_HW_STATUS | SVS_HW_STATUS;
+	struct mtk_cpufreq_data *data;
+	unsigned int latency;
+	int ret;
+
+	/* Get the bases of cpufreq for domains */
+	ret = mtk_cpu_resources_init(pdev, policy, platform_get_drvdata(pdev));
+	if (ret) {
+		dev_info(&pdev->dev, "CPUFreq resource init failed\n");
+		return ret;
+	}
+
+	data = policy->driver_data;
+
+	latency = readl_relaxed(data->reg_bases[REG_FREQ_LATENCY]) * 1000;
+	if (!latency)
+		latency = CPUFREQ_ETERNAL;
+
+	policy->cpuinfo.transition_latency = latency;
+	policy->fast_switch_possible = true;
+
+	/* HW should be in enabled state to proceed now */
+	writel_relaxed(0x1, data->reg_bases[REG_FREQ_ENABLE]);
+	if (readl_poll_timeout(data->reg_bases[REG_FREQ_HW_STATE], sig,
+			       (sig & pwr_hw) == pwr_hw, POLL_USEC,
+			       TIMEOUT_USEC)) {
+		if (!(sig & CPUFREQ_HW_STATUS)) {
+			pr_info("cpufreq hardware of CPU%d is not enabled\n",
+				policy->cpu);
+			return -ENODEV;
+		}
+
+		pr_info("SVS of CPU%d is not enabled\n", policy->cpu);
+	}
+
+	return 0;
+}
+
+static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
+{
+	struct mtk_cpufreq_data *data = policy->driver_data;
+
+	/* HW should be in paused state now */
+	writel_relaxed(0x0, data->reg_bases[REG_FREQ_ENABLE]);
+
+	return 0;
+}
+
+static void mtk_cpufreq_register_em(struct cpufreq_policy *policy)
+{
+	struct em_data_callback em_cb = EM_DATA_CB(mtk_cpufreq_get_cpu_power);
+	struct mtk_cpufreq_data *data = policy->driver_data;
+
+	em_dev_register_perf_domain(get_cpu_device(policy->cpu), data->nr_opp,
+				    &em_cb, policy->cpus, true);
+}
+
+static struct cpufreq_driver cpufreq_mtk_hw_driver = {
+	.flags		= CPUFREQ_NEED_INITIAL_FREQ_CHECK |
+			  CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
+			  CPUFREQ_IS_COOLING_DEV,
+	.verify		= cpufreq_generic_frequency_table_verify,
+	.target_index	= mtk_cpufreq_hw_target_index,
+	.get		= mtk_cpufreq_hw_get,
+	.init		= mtk_cpufreq_hw_cpu_init,
+	.exit		= mtk_cpufreq_hw_cpu_exit,
+	.register_em	= mtk_cpufreq_register_em,
+	.fast_switch	= mtk_cpufreq_hw_fast_switch,
+	.name		= "mtk-cpufreq-hw",
+	.attr		= cpufreq_generic_attr,
+};
+
+static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
+{
+	const void *data;
+	int ret;
+
+	data = of_device_get_match_data(&pdev->dev);
+	if (!data)
+		return -EINVAL;
+
+	platform_set_drvdata(pdev, (void *) data);
+	cpufreq_mtk_hw_driver.driver_data = pdev;
+
+	ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
+	if (ret)
+		dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
+
+	return ret;
+}
+
+static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
+{
+	return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
+}
+
+static const struct of_device_id mtk_cpufreq_hw_match[] = {
+	{ .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
+	{}
+};
+
+static struct platform_driver mtk_cpufreq_hw_driver = {
+	.probe = mtk_cpufreq_hw_driver_probe,
+	.remove = mtk_cpufreq_hw_driver_remove,
+	.driver = {
+		.name = "mtk-cpufreq-hw",
+		.of_match_table = mtk_cpufreq_hw_match,
+	},
+};
+module_platform_driver(mtk_cpufreq_hw_driver);
+
+MODULE_AUTHOR("Hector Yuan <hector.yuan@mediatek.com>");
+MODULE_DESCRIPTION("Mediatek cpufreq-hw driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/cpufreq/mediatek-cpufreq.c b/drivers/cpufreq/mediatek-cpufreq.c
index 87019d5a9547..866163883b48 100644
--- a/drivers/cpufreq/mediatek-cpufreq.c
+++ b/drivers/cpufreq/mediatek-cpufreq.c
@@ -448,8 +448,6 @@ static int mtk_cpufreq_init(struct cpufreq_policy *policy)
 	policy->driver_data = info;
 	policy->clk = info->cpu_clk;
 
-	dev_pm_opp_of_register_em(info->cpu_dev, policy->cpus);
-
 	return 0;
 }
 
@@ -471,6 +469,7 @@ static struct cpufreq_driver mtk_cpufreq_driver = {
 	.get = cpufreq_generic_get,
 	.init = mtk_cpufreq_init,
 	.exit = mtk_cpufreq_exit,
+	.register_em = cpufreq_register_em_with_opp,
 	.name = "mtk-cpufreq",
 	.attr = cpufreq_generic_attr,
 };
diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c
index e035ee216b0f..1b50df06c6bc 100644
--- a/drivers/cpufreq/omap-cpufreq.c
+++ b/drivers/cpufreq/omap-cpufreq.c
@@ -131,7 +131,6 @@ static int omap_cpu_init(struct cpufreq_policy *policy)
 
 	/* FIXME: what's the actual transition time? */
 	cpufreq_generic_init(policy, freq_table, 300 * 1000);
-	dev_pm_opp_of_register_em(mpu_dev, policy->cpus);
 
 	return 0;
 }
@@ -150,6 +149,7 @@ static struct cpufreq_driver omap_driver = {
 	.get		= cpufreq_generic_get,
 	.init		= omap_cpu_init,
 	.exit		= omap_cpu_exit,
+	.register_em	= cpufreq_register_em_with_opp,
 	.name		= "omap",
 	.attr		= cpufreq_generic_attr,
 };
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index f86859bf76f1..a2be0df7e174 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -7,12 +7,14 @@
 #include <linux/cpufreq.h>
 #include <linux/init.h>
 #include <linux/interconnect.h>
+#include <linux/interrupt.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
 #include <linux/of_platform.h>
 #include <linux/pm_opp.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 
 #define LUT_MAX_ENTRIES			40U
 #define LUT_SRC				GENMASK(31, 30)
@@ -22,10 +24,13 @@
 #define CLK_HW_DIV			2
 #define LUT_TURBO_IND			1
 
+#define HZ_PER_KHZ			1000
+
 struct qcom_cpufreq_soc_data {
 	u32 reg_enable;
 	u32 reg_freq_lut;
 	u32 reg_volt_lut;
+	u32 reg_current_vote;
 	u32 reg_perf_state;
 	u8 lut_row_size;
 };
@@ -34,6 +39,16 @@ struct qcom_cpufreq_data {
 	void __iomem *base;
 	struct resource *res;
 	const struct qcom_cpufreq_soc_data *soc_data;
+
+	/*
+	 * Mutex to synchronize between de-init sequence and re-starting LMh
+	 * polling/interrupts
+	 */
+	struct mutex throttle_lock;
+	int throttle_irq;
+	bool cancel_throttle;
+	struct delayed_work throttle_work;
+	struct cpufreq_policy *policy;
 };
 
 static unsigned long cpu_hw_rate, xo_rate;
@@ -251,10 +266,92 @@ static void qcom_get_related_cpus(int index, struct cpumask *m)
 	}
 }
 
+static unsigned int qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
+{
+	unsigned int val = readl_relaxed(data->base + data->soc_data->reg_current_vote);
+
+	return (val & 0x3FF) * 19200;
+}
+
+static void qcom_lmh_dcvs_notify(struct qcom_cpufreq_data *data)
+{
+	unsigned long max_capacity, capacity, freq_hz, throttled_freq;
+	struct cpufreq_policy *policy = data->policy;
+	int cpu = cpumask_first(policy->cpus);
+	struct device *dev = get_cpu_device(cpu);
+	struct dev_pm_opp *opp;
+	unsigned int freq;
+
+	/*
+	 * Get the h/w throttled frequency, normalize it using the
+	 * registered opp table and use it to calculate thermal pressure.
+	 */
+	freq = qcom_lmh_get_throttle_freq(data);
+	freq_hz = freq * HZ_PER_KHZ;
+
+	opp = dev_pm_opp_find_freq_floor(dev, &freq_hz);
+	if (IS_ERR(opp) && PTR_ERR(opp) == -ERANGE)
+		dev_pm_opp_find_freq_ceil(dev, &freq_hz);
+
+	throttled_freq = freq_hz / HZ_PER_KHZ;
+
+	/* Update thermal pressure */
+
+	max_capacity = arch_scale_cpu_capacity(cpu);
+	capacity = mult_frac(max_capacity, throttled_freq, policy->cpuinfo.max_freq);
+
+	/* Don't pass boost capacity to scheduler */
+	if (capacity > max_capacity)
+		capacity = max_capacity;
+
+	arch_set_thermal_pressure(policy->cpus, max_capacity - capacity);
+
+	/*
+	 * In the unlikely case policy is unregistered do not enable
+	 * polling or h/w interrupt
+	 */
+	mutex_lock(&data->throttle_lock);
+	if (data->cancel_throttle)
+		goto out;
+
+	/*
+	 * If h/w throttled frequency is higher than what cpufreq has requested
+	 * for, then stop polling and switch back to interrupt mechanism.
+	 */
+	if (throttled_freq >= qcom_cpufreq_hw_get(cpu))
+		enable_irq(data->throttle_irq);
+	else
+		mod_delayed_work(system_highpri_wq, &data->throttle_work,
+				 msecs_to_jiffies(10));
+
+out:
+	mutex_unlock(&data->throttle_lock);
+}
+
+static void qcom_lmh_dcvs_poll(struct work_struct *work)
+{
+	struct qcom_cpufreq_data *data;
+
+	data = container_of(work, struct qcom_cpufreq_data, throttle_work.work);
+	qcom_lmh_dcvs_notify(data);
+}
+
+static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
+{
+	struct qcom_cpufreq_data *c_data = data;
+
+	/* Disable interrupt and enable polling */
+	disable_irq_nosync(c_data->throttle_irq);
+	qcom_lmh_dcvs_notify(c_data);
+
+	return 0;
+}
+
 static const struct qcom_cpufreq_soc_data qcom_soc_data = {
 	.reg_enable = 0x0,
 	.reg_freq_lut = 0x110,
 	.reg_volt_lut = 0x114,
+	.reg_current_vote = 0x704,
 	.reg_perf_state = 0x920,
 	.lut_row_size = 32,
 };
@@ -274,6 +371,51 @@ static const struct of_device_id qcom_cpufreq_hw_match[] = {
 };
 MODULE_DEVICE_TABLE(of, qcom_cpufreq_hw_match);
 
+static int qcom_cpufreq_hw_lmh_init(struct cpufreq_policy *policy, int index)
+{
+	struct qcom_cpufreq_data *data = policy->driver_data;
+	struct platform_device *pdev = cpufreq_get_driver_data();
+	char irq_name[15];
+	int ret;
+
+	/*
+	 * Look for LMh interrupt. If no interrupt line is specified /
+	 * if there is an error, allow cpufreq to be enabled as usual.
+	 */
+	data->throttle_irq = platform_get_irq(pdev, index);
+	if (data->throttle_irq <= 0)
+		return data->throttle_irq == -EPROBE_DEFER ? -EPROBE_DEFER : 0;
+
+	data->cancel_throttle = false;
+	data->policy = policy;
+
+	mutex_init(&data->throttle_lock);
+	INIT_DEFERRABLE_WORK(&data->throttle_work, qcom_lmh_dcvs_poll);
+
+	snprintf(irq_name, sizeof(irq_name), "dcvsh-irq-%u", policy->cpu);
+	ret = request_threaded_irq(data->throttle_irq, NULL, qcom_lmh_dcvs_handle_irq,
+				   IRQF_ONESHOT, irq_name, data);
+	if (ret) {
+		dev_err(&pdev->dev, "Error registering %s: %d\n", irq_name, ret);
+		return 0;
+	}
+
+	return 0;
+}
+
+static void qcom_cpufreq_hw_lmh_exit(struct qcom_cpufreq_data *data)
+{
+	if (data->throttle_irq <= 0)
+		return;
+
+	mutex_lock(&data->throttle_lock);
+	data->cancel_throttle = true;
+	mutex_unlock(&data->throttle_lock);
+
+	cancel_delayed_work_sync(&data->throttle_work);
+	free_irq(data->throttle_irq, data);
+}
+
 static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 {
 	struct platform_device *pdev = cpufreq_get_driver_data();
@@ -348,6 +490,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 	}
 
 	policy->driver_data = data;
+	policy->dvfs_possible_from_any_cpu = true;
 
 	ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
 	if (ret) {
@@ -362,14 +505,16 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
 		goto error;
 	}
 
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-
 	if (policy_has_boost_freq(policy)) {
 		ret = cpufreq_enable_boost_support();
 		if (ret)
 			dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
 	}
 
+	ret = qcom_cpufreq_hw_lmh_init(policy, index);
+	if (ret)
+		goto error;
+
 	return 0;
 error:
 	kfree(data);
@@ -389,6 +534,7 @@ static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
 
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 	dev_pm_opp_of_cpumask_remove_table(policy->related_cpus);
+	qcom_cpufreq_hw_lmh_exit(data);
 	kfree(policy->freq_table);
 	kfree(data);
 	iounmap(base);
@@ -412,6 +558,7 @@ static struct cpufreq_driver cpufreq_qcom_hw_driver = {
 	.get		= qcom_cpufreq_hw_get,
 	.init		= qcom_cpufreq_hw_cpu_init,
 	.exit		= qcom_cpufreq_hw_cpu_exit,
+	.register_em	= cpufreq_register_em_with_opp,
 	.fast_switch    = qcom_cpufreq_hw_fast_switch,
 	.name		= "qcom-cpufreq-hw",
 	.attr		= qcom_cpufreq_hw_attr,
diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c
index 75f818d04b48..1e0cd4d165f0 100644
--- a/drivers/cpufreq/scmi-cpufreq.c
+++ b/drivers/cpufreq/scmi-cpufreq.c
@@ -22,7 +22,9 @@
 
 struct scmi_data {
 	int domain_id;
+	int nr_opp;
 	struct device *cpu_dev;
+	cpumask_var_t opp_shared_cpus;
 };
 
 static struct scmi_protocol_handle *ph;
@@ -123,9 +125,6 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	struct device *cpu_dev;
 	struct scmi_data *priv;
 	struct cpufreq_frequency_table *freq_table;
-	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
-	cpumask_var_t opp_shared_cpus;
-	bool power_scale_mw;
 
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
@@ -133,9 +132,15 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 		return -ENODEV;
 	}
 
-	if (!zalloc_cpumask_var(&opp_shared_cpus, GFP_KERNEL))
+	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;
 
+	if (!zalloc_cpumask_var(&priv->opp_shared_cpus, GFP_KERNEL)) {
+		ret = -ENOMEM;
+		goto out_free_priv;
+	}
+
 	/* Obtain CPUs that share SCMI performance controls */
 	ret = scmi_get_sharing_cpus(cpu_dev, policy->cpus);
 	if (ret) {
@@ -148,14 +153,14 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	 * The OPP 'sharing cpus' info may come from DT through an empty opp
 	 * table and opp-shared.
 	 */
-	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, opp_shared_cpus);
-	if (ret || !cpumask_weight(opp_shared_cpus)) {
+	ret = dev_pm_opp_of_get_sharing_cpus(cpu_dev, priv->opp_shared_cpus);
+	if (ret || !cpumask_weight(priv->opp_shared_cpus)) {
 		/*
 		 * Either opp-table is not set or no opp-shared was found.
 		 * Use the CPU mask from SCMI to designate CPUs sharing an OPP
 		 * table.
 		 */
-		cpumask_copy(opp_shared_cpus, policy->cpus);
+		cpumask_copy(priv->opp_shared_cpus, policy->cpus);
 	}
 
 	 /*
@@ -180,7 +185,7 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 			goto out_free_opp;
 		}
 
-		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, opp_shared_cpus);
+		ret = dev_pm_opp_set_sharing_cpus(cpu_dev, priv->opp_shared_cpus);
 		if (ret) {
 			dev_err(cpu_dev, "%s: failed to mark OPPs as shared: %d\n",
 				__func__, ret);
@@ -188,21 +193,13 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 			goto out_free_opp;
 		}
 
-		power_scale_mw = perf_ops->power_scale_mw_get(ph);
-		em_dev_register_perf_domain(cpu_dev, nr_opp, &em_cb,
-					    opp_shared_cpus, power_scale_mw);
-	}
-
-	priv = kzalloc(sizeof(*priv), GFP_KERNEL);
-	if (!priv) {
-		ret = -ENOMEM;
-		goto out_free_opp;
+		priv->nr_opp = nr_opp;
 	}
 
 	ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
 	if (ret) {
 		dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
-		goto out_free_priv;
+		goto out_free_opp;
 	}
 
 	priv->cpu_dev = cpu_dev;
@@ -223,17 +220,16 @@ static int scmi_cpufreq_init(struct cpufreq_policy *policy)
 	policy->fast_switch_possible =
 		perf_ops->fast_switch_possible(ph, cpu_dev);
 
-	free_cpumask_var(opp_shared_cpus);
 	return 0;
 
-out_free_priv:
-	kfree(priv);
-
 out_free_opp:
 	dev_pm_opp_remove_all_dynamic(cpu_dev);
 
 out_free_cpumask:
-	free_cpumask_var(opp_shared_cpus);
+	free_cpumask_var(priv->opp_shared_cpus);
+
+out_free_priv:
+	kfree(priv);
 
 	return ret;
 }
@@ -244,11 +240,33 @@ static int scmi_cpufreq_exit(struct cpufreq_policy *policy)
 
 	dev_pm_opp_free_cpufreq_table(priv->cpu_dev, &policy->freq_table);
 	dev_pm_opp_remove_all_dynamic(priv->cpu_dev);
+	free_cpumask_var(priv->opp_shared_cpus);
 	kfree(priv);
 
 	return 0;
 }
 
+static void scmi_cpufreq_register_em(struct cpufreq_policy *policy)
+{
+	struct em_data_callback em_cb = EM_DATA_CB(scmi_get_cpu_power);
+	bool power_scale_mw = perf_ops->power_scale_mw_get(ph);
+	struct scmi_data *priv = policy->driver_data;
+
+	/*
+	 * This callback will be called for each policy, but we don't need to
+	 * register with EM every time. Despite not being part of the same
+	 * policy, some CPUs may still share their perf-domains, and a CPU from
+	 * another policy may already have registered with EM on behalf of CPUs
+	 * of this policy.
+	 */
+	if (!priv->nr_opp)
+		return;
+
+	em_dev_register_perf_domain(get_cpu_device(policy->cpu), priv->nr_opp,
+				    &em_cb, priv->opp_shared_cpus,
+				    power_scale_mw);
+}
+
 static struct cpufreq_driver scmi_cpufreq_driver = {
 	.name	= "scmi",
 	.flags	= CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
@@ -261,6 +279,7 @@ static struct cpufreq_driver scmi_cpufreq_driver = {
 	.get	= scmi_cpufreq_get_rate,
 	.init	= scmi_cpufreq_init,
 	.exit	= scmi_cpufreq_exit,
+	.register_em	= scmi_cpufreq_register_em,
 };
 
 static int scmi_cpufreq_probe(struct scmi_device *sdev)
diff --git a/drivers/cpufreq/scpi-cpufreq.c b/drivers/cpufreq/scpi-cpufreq.c
index d6a698a1b5d1..bda3e7d42964 100644
--- a/drivers/cpufreq/scpi-cpufreq.c
+++ b/drivers/cpufreq/scpi-cpufreq.c
@@ -163,8 +163,6 @@ static int scpi_cpufreq_init(struct cpufreq_policy *policy)
 
 	policy->fast_switch_possible = false;
 
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-
 	return 0;
 
 out_free_cpufreq_table:
@@ -200,6 +198,7 @@ static struct cpufreq_driver scpi_cpufreq_driver = {
 	.init	= scpi_cpufreq_init,
 	.exit	= scpi_cpufreq_exit,
 	.target_index	= scpi_cpufreq_set_target,
+	.register_em	= cpufreq_register_em_with_opp,
 };
 
 static int scpi_cpufreq_probe(struct platform_device *pdev)
diff --git a/drivers/cpufreq/sh-cpufreq.c b/drivers/cpufreq/sh-cpufreq.c
index 1a251e635ebd..b8704232c27b 100644
--- a/drivers/cpufreq/sh-cpufreq.c
+++ b/drivers/cpufreq/sh-cpufreq.c
@@ -145,16 +145,6 @@ static int sh_cpufreq_cpu_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void sh_cpufreq_cpu_ready(struct cpufreq_policy *policy)
-{
-	struct device *dev = get_cpu_device(policy->cpu);
-
-	dev_info(dev, "CPU Frequencies - Minimum %u.%03u MHz, "
-	       "Maximum %u.%03u MHz.\n",
-	       policy->min / 1000, policy->min % 1000,
-	       policy->max / 1000, policy->max % 1000);
-}
-
 static struct cpufreq_driver sh_cpufreq_driver = {
 	.name		= "sh",
 	.flags		= CPUFREQ_NO_AUTO_DYNAMIC_SWITCHING,
@@ -163,7 +153,6 @@ static struct cpufreq_driver sh_cpufreq_driver = {
 	.verify		= sh_cpufreq_verify,
 	.init		= sh_cpufreq_cpu_init,
 	.exit		= sh_cpufreq_cpu_exit,
-	.ready		= sh_cpufreq_cpu_ready,
 	.attr		= cpufreq_generic_attr,
 };
 
diff --git a/drivers/cpufreq/vexpress-spc-cpufreq.c b/drivers/cpufreq/vexpress-spc-cpufreq.c
index 51dfa9ae6cf5..284b6bd040b1 100644
--- a/drivers/cpufreq/vexpress-spc-cpufreq.c
+++ b/drivers/cpufreq/vexpress-spc-cpufreq.c
@@ -15,7 +15,6 @@
 #include <linux/cpu.h>
 #include <linux/cpufreq.h>
 #include <linux/cpumask.h>
-#include <linux/cpu_cooling.h>
 #include <linux/device.h>
 #include <linux/module.h>
 #include <linux/mutex.h>
@@ -47,7 +46,6 @@ static bool bL_switching_enabled;
 #define ACTUAL_FREQ(cluster, freq)  ((cluster == A7_CLUSTER) ? freq << 1 : freq)
 #define VIRT_FREQ(cluster, freq)    ((cluster == A7_CLUSTER) ? freq >> 1 : freq)
 
-static struct thermal_cooling_device *cdev[MAX_CLUSTERS];
 static struct clk *clk[MAX_CLUSTERS];
 static struct cpufreq_frequency_table *freq_table[MAX_CLUSTERS + 1];
 static atomic_t cluster_usage[MAX_CLUSTERS + 1];
@@ -442,8 +440,6 @@ static int ve_spc_cpufreq_init(struct cpufreq_policy *policy)
 	policy->freq_table = freq_table[cur_cluster];
 	policy->cpuinfo.transition_latency = 1000000; /* 1 ms */
 
-	dev_pm_opp_of_register_em(cpu_dev, policy->cpus);
-
 	if (is_bL_switching_enabled())
 		per_cpu(cpu_last_req_freq, policy->cpu) =
 						clk_get_cpu_rate(policy->cpu);
@@ -457,11 +453,6 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 	struct device *cpu_dev;
 	int cur_cluster = cpu_to_cluster(policy->cpu);
 
-	if (cur_cluster < MAX_CLUSTERS) {
-		cpufreq_cooling_unregister(cdev[cur_cluster]);
-		cdev[cur_cluster] = NULL;
-	}
-
 	cpu_dev = get_cpu_device(policy->cpu);
 	if (!cpu_dev) {
 		pr_err("%s: failed to get cpu%d device\n", __func__,
@@ -473,17 +464,6 @@ static int ve_spc_cpufreq_exit(struct cpufreq_policy *policy)
 	return 0;
 }
 
-static void ve_spc_cpufreq_ready(struct cpufreq_policy *policy)
-{
-	int cur_cluster = cpu_to_cluster(policy->cpu);
-
-	/* Do not register a cpu_cooling device if we are in IKS mode */
-	if (cur_cluster >= MAX_CLUSTERS)
-		return;
-
-	cdev[cur_cluster] = of_cpufreq_cooling_register(policy);
-}
-
 static struct cpufreq_driver ve_spc_cpufreq_driver = {
 	.name			= "vexpress-spc",
 	.flags			= CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
@@ -493,7 +473,7 @@ static struct cpufreq_driver ve_spc_cpufreq_driver = {
 	.get			= ve_spc_cpufreq_get_rate,
 	.init			= ve_spc_cpufreq_init,
 	.exit			= ve_spc_cpufreq_exit,
-	.ready			= ve_spc_cpufreq_ready,
+	.register_em		= cpufreq_register_em_with_opp,
 	.attr			= cpufreq_generic_attr,
 };
 
@@ -553,6 +533,9 @@ static int ve_spc_cpufreq_probe(struct platform_device *pdev)
 	for (i = 0; i < MAX_CLUSTERS; i++)
 		mutex_init(&cluster_lock[i]);
 
+	if (!is_bL_switching_enabled())
+		ve_spc_cpufreq_driver.flags |= CPUFREQ_IS_COOLING_DEV;
+
 	ret = cpufreq_register_driver(&ve_spc_cpufreq_driver);
 	if (ret) {
 		pr_info("%s: Failed registering platform driver: %s, err: %d\n",
diff --git a/drivers/cpuidle/cpuidle-ux500.c b/drivers/cpuidle/cpuidle-ux500.c
index a2d34be17a09..f7d778580e9b 100644
--- a/drivers/cpuidle/cpuidle-ux500.c
+++ b/drivers/cpuidle/cpuidle-ux500.c
@@ -117,7 +117,7 @@ static int dbx500_cpuidle_probe(struct platform_device *pdev)
 
 static struct platform_driver dbx500_cpuidle_plat_driver = {
 	.driver = {
-		.name = "cpuidle-dbx500",
+		.name = "db8500-cpuidle",
 	},
 	.probe = dbx500_cpuidle_probe,
 };
diff --git a/drivers/crypto/cavium/nitrox/nitrox_main.c b/drivers/crypto/cavium/nitrox/nitrox_main.c
index 96bc7b5c6532..6c61817996a3 100644
--- a/drivers/crypto/cavium/nitrox/nitrox_main.c
+++ b/drivers/crypto/cavium/nitrox/nitrox_main.c
@@ -306,9 +306,7 @@ static int nitrox_device_flr(struct pci_dev *pdev)
 		return -ENOMEM;
 	}
 
-	/* check flr support */
-	if (pcie_has_flr(pdev))
-		pcie_flr(pdev);
+	pcie_reset_flr(pdev, PCI_RESET_DO_RESET);
 
 	pci_restore_state(pdev);
 
diff --git a/drivers/cxl/Makefile b/drivers/cxl/Makefile
index 32954059b37b..d1aaabc940f3 100644
--- a/drivers/cxl/Makefile
+++ b/drivers/cxl/Makefile
@@ -1,11 +1,9 @@
 # SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_CXL_BUS) += cxl_core.o
+obj-$(CONFIG_CXL_BUS) += core/
 obj-$(CONFIG_CXL_MEM) += cxl_pci.o
 obj-$(CONFIG_CXL_ACPI) += cxl_acpi.o
 obj-$(CONFIG_CXL_PMEM) += cxl_pmem.o
 
-ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CXL
-cxl_core-y := core.o
 cxl_pci-y := pci.o
 cxl_acpi-y := acpi.o
 cxl_pmem-y := pmem.o
diff --git a/drivers/cxl/acpi.c b/drivers/cxl/acpi.c
index 8ae89273f58e..54e9d4d2cf5f 100644
--- a/drivers/cxl/acpi.c
+++ b/drivers/cxl/acpi.c
@@ -243,6 +243,9 @@ static struct acpi_device *to_cxl_host_bridge(struct device *dev)
 {
 	struct acpi_device *adev = to_acpi_device(dev);
 
+	if (!acpi_pci_find_root(adev->handle))
+		return NULL;
+
 	if (strcmp(acpi_device_hid(adev), "ACPI0016") == 0)
 		return adev;
 	return NULL;
@@ -266,10 +269,6 @@ static int add_host_bridge_uport(struct device *match, void *arg)
 	if (!bridge)
 		return 0;
 
-	pci_root = acpi_pci_find_root(bridge->handle);
-	if (!pci_root)
-		return -ENXIO;
-
 	dport = find_dport_by_dev(root_port, match);
 	if (!dport) {
 		dev_dbg(host, "host bridge expected and not found\n");
@@ -282,6 +281,11 @@ static int add_host_bridge_uport(struct device *match, void *arg)
 		return PTR_ERR(port);
 	dev_dbg(host, "%s: add: %s\n", dev_name(match), dev_name(&port->dev));
 
+	/*
+	 * Note that this lookup already succeeded in
+	 * to_cxl_host_bridge(), so no need to check for failure here
+	 */
+	pci_root = acpi_pci_find_root(bridge->handle);
 	ctx = (struct cxl_walk_context){
 		.dev = host,
 		.root = pci_root->bus,
diff --git a/drivers/cxl/core/Makefile b/drivers/cxl/core/Makefile
new file mode 100644
index 000000000000..0fdbf3c6ac1a
--- /dev/null
+++ b/drivers/cxl/core/Makefile
@@ -0,0 +1,8 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_CXL_BUS) += cxl_core.o
+
+ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=CXL -I$(srctree)/drivers/cxl
+cxl_core-y := bus.o
+cxl_core-y += pmem.o
+cxl_core-y += regs.o
+cxl_core-y += memdev.o
diff --git a/drivers/cxl/core.c b/drivers/cxl/core/bus.c
index 2b90b7c3b9d7..267d8042bec2 100644
--- a/drivers/cxl/core.c
+++ b/drivers/cxl/core/bus.c
@@ -6,14 +6,22 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/idr.h>
-#include "cxl.h"
-#include "mem.h"
+#include <cxlmem.h>
+#include <cxl.h>
+#include "core.h"
 
 /**
  * DOC: cxl core
  *
- * The CXL core provides a sysfs hierarchy for control devices and a rendezvous
- * point for cross-device interleave coordination through cxl ports.
+ * The CXL core provides a set of interfaces that can be consumed by CXL aware
+ * drivers. The interfaces allow for creation, modification, and destruction of
+ * regions, memory devices, ports, and decoders. CXL aware drivers must register
+ * with the CXL core via these interfaces in order to be able to participate in
+ * cross-device interleave coordination. The CXL core also establishes and
+ * maintains the bridge to the nvdimm subsystem.
+ *
+ * CXL core introduces sysfs hierarchy to control the devices that are
+ * instantiated by the core.
  */
 
 static DEFINE_IDA(cxl_port_ida);
@@ -30,7 +38,7 @@ static struct attribute *cxl_base_attributes[] = {
 	NULL,
 };
 
-static struct attribute_group cxl_base_attribute_group = {
+struct attribute_group cxl_base_attribute_group = {
 	.attrs = cxl_base_attributes,
 };
 
@@ -507,11 +515,6 @@ err:
 	return ERR_PTR(rc);
 }
 
-static void unregister_dev(void *dev)
-{
-	device_unregister(dev);
-}
-
 struct cxl_decoder *
 devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets,
 		     resource_size_t base, resource_size_t len,
@@ -536,7 +539,7 @@ devm_cxl_add_decoder(struct device *host, struct cxl_port *port, int nr_targets,
 	if (rc)
 		goto err;
 
-	rc = devm_add_action_or_reset(host, unregister_dev, dev);
+	rc = devm_add_action_or_reset(host, unregister_cxl_dev, dev);
 	if (rc)
 		return ERR_PTR(rc);
 	return cxld;
@@ -548,429 +551,6 @@ err:
 EXPORT_SYMBOL_GPL(devm_cxl_add_decoder);
 
 /**
- * cxl_probe_component_regs() - Detect CXL Component register blocks
- * @dev: Host device of the @base mapping
- * @base: Mapping containing the HDM Decoder Capability Header
- * @map: Map object describing the register block information found
- *
- * See CXL 2.0 8.2.4 Component Register Layout and Definition
- * See CXL 2.0 8.2.5.5 CXL Device Register Interface
- *
- * Probe for component register information and return it in map object.
- */
-void cxl_probe_component_regs(struct device *dev, void __iomem *base,
-			      struct cxl_component_reg_map *map)
-{
-	int cap, cap_count;
-	u64 cap_array;
-
-	*map = (struct cxl_component_reg_map) { 0 };
-
-	/*
-	 * CXL.cache and CXL.mem registers are at offset 0x1000 as defined in
-	 * CXL 2.0 8.2.4 Table 141.
-	 */
-	base += CXL_CM_OFFSET;
-
-	cap_array = readq(base + CXL_CM_CAP_HDR_OFFSET);
-
-	if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, cap_array) != CM_CAP_HDR_CAP_ID) {
-		dev_err(dev,
-			"Couldn't locate the CXL.cache and CXL.mem capability array header./n");
-		return;
-	}
-
-	/* It's assumed that future versions will be backward compatible */
-	cap_count = FIELD_GET(CXL_CM_CAP_HDR_ARRAY_SIZE_MASK, cap_array);
-
-	for (cap = 1; cap <= cap_count; cap++) {
-		void __iomem *register_block;
-		u32 hdr;
-		int decoder_cnt;
-		u16 cap_id, offset;
-		u32 length;
-
-		hdr = readl(base + cap * 0x4);
-
-		cap_id = FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, hdr);
-		offset = FIELD_GET(CXL_CM_CAP_PTR_MASK, hdr);
-		register_block = base + offset;
-
-		switch (cap_id) {
-		case CXL_CM_CAP_CAP_ID_HDM:
-			dev_dbg(dev, "found HDM decoder capability (0x%x)\n",
-				offset);
-
-			hdr = readl(register_block);
-
-			decoder_cnt = cxl_hdm_decoder_count(hdr);
-			length = 0x20 * decoder_cnt + 0x10;
-
-			map->hdm_decoder.valid = true;
-			map->hdm_decoder.offset = CXL_CM_OFFSET + offset;
-			map->hdm_decoder.size = length;
-			break;
-		default:
-			dev_dbg(dev, "Unknown CM cap ID: %d (0x%x)\n", cap_id,
-				offset);
-			break;
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(cxl_probe_component_regs);
-
-static void cxl_nvdimm_bridge_release(struct device *dev)
-{
-	struct cxl_nvdimm_bridge *cxl_nvb = to_cxl_nvdimm_bridge(dev);
-
-	kfree(cxl_nvb);
-}
-
-static const struct attribute_group *cxl_nvdimm_bridge_attribute_groups[] = {
-	&cxl_base_attribute_group,
-	NULL,
-};
-
-static const struct device_type cxl_nvdimm_bridge_type = {
-	.name = "cxl_nvdimm_bridge",
-	.release = cxl_nvdimm_bridge_release,
-	.groups = cxl_nvdimm_bridge_attribute_groups,
-};
-
-struct cxl_nvdimm_bridge *to_cxl_nvdimm_bridge(struct device *dev)
-{
-	if (dev_WARN_ONCE(dev, dev->type != &cxl_nvdimm_bridge_type,
-			  "not a cxl_nvdimm_bridge device\n"))
-		return NULL;
-	return container_of(dev, struct cxl_nvdimm_bridge, dev);
-}
-EXPORT_SYMBOL_GPL(to_cxl_nvdimm_bridge);
-
-static struct cxl_nvdimm_bridge *
-cxl_nvdimm_bridge_alloc(struct cxl_port *port)
-{
-	struct cxl_nvdimm_bridge *cxl_nvb;
-	struct device *dev;
-
-	cxl_nvb = kzalloc(sizeof(*cxl_nvb), GFP_KERNEL);
-	if (!cxl_nvb)
-		return ERR_PTR(-ENOMEM);
-
-	dev = &cxl_nvb->dev;
-	cxl_nvb->port = port;
-	cxl_nvb->state = CXL_NVB_NEW;
-	device_initialize(dev);
-	device_set_pm_not_required(dev);
-	dev->parent = &port->dev;
-	dev->bus = &cxl_bus_type;
-	dev->type = &cxl_nvdimm_bridge_type;
-
-	return cxl_nvb;
-}
-
-static void unregister_nvb(void *_cxl_nvb)
-{
-	struct cxl_nvdimm_bridge *cxl_nvb = _cxl_nvb;
-	bool flush;
-
-	/*
-	 * If the bridge was ever activated then there might be in-flight state
-	 * work to flush. Once the state has been changed to 'dead' then no new
-	 * work can be queued by user-triggered bind.
-	 */
-	device_lock(&cxl_nvb->dev);
-	flush = cxl_nvb->state != CXL_NVB_NEW;
-	cxl_nvb->state = CXL_NVB_DEAD;
-	device_unlock(&cxl_nvb->dev);
-
-	/*
-	 * Even though the device core will trigger device_release_driver()
-	 * before the unregister, it does not know about the fact that
-	 * cxl_nvdimm_bridge_driver defers ->remove() work. So, do the driver
-	 * release not and flush it before tearing down the nvdimm device
-	 * hierarchy.
-	 */
-	device_release_driver(&cxl_nvb->dev);
-	if (flush)
-		flush_work(&cxl_nvb->state_work);
-	device_unregister(&cxl_nvb->dev);
-}
-
-struct cxl_nvdimm_bridge *devm_cxl_add_nvdimm_bridge(struct device *host,
-						     struct cxl_port *port)
-{
-	struct cxl_nvdimm_bridge *cxl_nvb;
-	struct device *dev;
-	int rc;
-
-	if (!IS_ENABLED(CONFIG_CXL_PMEM))
-		return ERR_PTR(-ENXIO);
-
-	cxl_nvb = cxl_nvdimm_bridge_alloc(port);
-	if (IS_ERR(cxl_nvb))
-		return cxl_nvb;
-
-	dev = &cxl_nvb->dev;
-	rc = dev_set_name(dev, "nvdimm-bridge");
-	if (rc)
-		goto err;
-
-	rc = device_add(dev);
-	if (rc)
-		goto err;
-
-	rc = devm_add_action_or_reset(host, unregister_nvb, cxl_nvb);
-	if (rc)
-		return ERR_PTR(rc);
-
-	return cxl_nvb;
-
-err:
-	put_device(dev);
-	return ERR_PTR(rc);
-}
-EXPORT_SYMBOL_GPL(devm_cxl_add_nvdimm_bridge);
-
-static void cxl_nvdimm_release(struct device *dev)
-{
-	struct cxl_nvdimm *cxl_nvd = to_cxl_nvdimm(dev);
-
-	kfree(cxl_nvd);
-}
-
-static const struct attribute_group *cxl_nvdimm_attribute_groups[] = {
-	&cxl_base_attribute_group,
-	NULL,
-};
-
-static const struct device_type cxl_nvdimm_type = {
-	.name = "cxl_nvdimm",
-	.release = cxl_nvdimm_release,
-	.groups = cxl_nvdimm_attribute_groups,
-};
-
-bool is_cxl_nvdimm(struct device *dev)
-{
-	return dev->type == &cxl_nvdimm_type;
-}
-EXPORT_SYMBOL_GPL(is_cxl_nvdimm);
-
-struct cxl_nvdimm *to_cxl_nvdimm(struct device *dev)
-{
-	if (dev_WARN_ONCE(dev, !is_cxl_nvdimm(dev),
-			  "not a cxl_nvdimm device\n"))
-		return NULL;
-	return container_of(dev, struct cxl_nvdimm, dev);
-}
-EXPORT_SYMBOL_GPL(to_cxl_nvdimm);
-
-static struct cxl_nvdimm *cxl_nvdimm_alloc(struct cxl_memdev *cxlmd)
-{
-	struct cxl_nvdimm *cxl_nvd;
-	struct device *dev;
-
-	cxl_nvd = kzalloc(sizeof(*cxl_nvd), GFP_KERNEL);
-	if (!cxl_nvd)
-		return ERR_PTR(-ENOMEM);
-
-	dev = &cxl_nvd->dev;
-	cxl_nvd->cxlmd = cxlmd;
-	device_initialize(dev);
-	device_set_pm_not_required(dev);
-	dev->parent = &cxlmd->dev;
-	dev->bus = &cxl_bus_type;
-	dev->type = &cxl_nvdimm_type;
-
-	return cxl_nvd;
-}
-
-int devm_cxl_add_nvdimm(struct device *host, struct cxl_memdev *cxlmd)
-{
-	struct cxl_nvdimm *cxl_nvd;
-	struct device *dev;
-	int rc;
-
-	cxl_nvd = cxl_nvdimm_alloc(cxlmd);
-	if (IS_ERR(cxl_nvd))
-		return PTR_ERR(cxl_nvd);
-
-	dev = &cxl_nvd->dev;
-	rc = dev_set_name(dev, "pmem%d", cxlmd->id);
-	if (rc)
-		goto err;
-
-	rc = device_add(dev);
-	if (rc)
-		goto err;
-
-	dev_dbg(host, "%s: register %s\n", dev_name(dev->parent),
-		dev_name(dev));
-
-	return devm_add_action_or_reset(host, unregister_dev, dev);
-
-err:
-	put_device(dev);
-	return rc;
-}
-EXPORT_SYMBOL_GPL(devm_cxl_add_nvdimm);
-
-/**
- * cxl_probe_device_regs() - Detect CXL Device register blocks
- * @dev: Host device of the @base mapping
- * @base: Mapping of CXL 2.0 8.2.8 CXL Device Register Interface
- * @map: Map object describing the register block information found
- *
- * Probe for device register information and return it in map object.
- */
-void cxl_probe_device_regs(struct device *dev, void __iomem *base,
-			   struct cxl_device_reg_map *map)
-{
-	int cap, cap_count;
-	u64 cap_array;
-
-	*map = (struct cxl_device_reg_map){ 0 };
-
-	cap_array = readq(base + CXLDEV_CAP_ARRAY_OFFSET);
-	if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
-	    CXLDEV_CAP_ARRAY_CAP_ID)
-		return;
-
-	cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
-
-	for (cap = 1; cap <= cap_count; cap++) {
-		u32 offset, length;
-		u16 cap_id;
-
-		cap_id = FIELD_GET(CXLDEV_CAP_HDR_CAP_ID_MASK,
-				   readl(base + cap * 0x10));
-		offset = readl(base + cap * 0x10 + 0x4);
-		length = readl(base + cap * 0x10 + 0x8);
-
-		switch (cap_id) {
-		case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
-			dev_dbg(dev, "found Status capability (0x%x)\n", offset);
-
-			map->status.valid = true;
-			map->status.offset = offset;
-			map->status.size = length;
-			break;
-		case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
-			dev_dbg(dev, "found Mailbox capability (0x%x)\n", offset);
-			map->mbox.valid = true;
-			map->mbox.offset = offset;
-			map->mbox.size = length;
-			break;
-		case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
-			dev_dbg(dev, "found Secondary Mailbox capability (0x%x)\n", offset);
-			break;
-		case CXLDEV_CAP_CAP_ID_MEMDEV:
-			dev_dbg(dev, "found Memory Device capability (0x%x)\n", offset);
-			map->memdev.valid = true;
-			map->memdev.offset = offset;
-			map->memdev.size = length;
-			break;
-		default:
-			if (cap_id >= 0x8000)
-				dev_dbg(dev, "Vendor cap ID: %#x offset: %#x\n", cap_id, offset);
-			else
-				dev_dbg(dev, "Unknown cap ID: %#x offset: %#x\n", cap_id, offset);
-			break;
-		}
-	}
-}
-EXPORT_SYMBOL_GPL(cxl_probe_device_regs);
-
-static void __iomem *devm_cxl_iomap_block(struct device *dev,
-					  resource_size_t addr,
-					  resource_size_t length)
-{
-	void __iomem *ret_val;
-	struct resource *res;
-
-	res = devm_request_mem_region(dev, addr, length, dev_name(dev));
-	if (!res) {
-		resource_size_t end = addr + length - 1;
-
-		dev_err(dev, "Failed to request region %pa-%pa\n", &addr, &end);
-		return NULL;
-	}
-
-	ret_val = devm_ioremap(dev, addr, length);
-	if (!ret_val)
-		dev_err(dev, "Failed to map region %pr\n", res);
-
-	return ret_val;
-}
-
-int cxl_map_component_regs(struct pci_dev *pdev,
-			   struct cxl_component_regs *regs,
-			   struct cxl_register_map *map)
-{
-	struct device *dev = &pdev->dev;
-	resource_size_t phys_addr;
-	resource_size_t length;
-
-	phys_addr = pci_resource_start(pdev, map->barno);
-	phys_addr += map->block_offset;
-
-	phys_addr += map->component_map.hdm_decoder.offset;
-	length = map->component_map.hdm_decoder.size;
-	regs->hdm_decoder = devm_cxl_iomap_block(dev, phys_addr, length);
-	if (!regs->hdm_decoder)
-		return -ENOMEM;
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cxl_map_component_regs);
-
-int cxl_map_device_regs(struct pci_dev *pdev,
-			struct cxl_device_regs *regs,
-			struct cxl_register_map *map)
-{
-	struct device *dev = &pdev->dev;
-	resource_size_t phys_addr;
-
-	phys_addr = pci_resource_start(pdev, map->barno);
-	phys_addr += map->block_offset;
-
-	if (map->device_map.status.valid) {
-		resource_size_t addr;
-		resource_size_t length;
-
-		addr = phys_addr + map->device_map.status.offset;
-		length = map->device_map.status.size;
-		regs->status = devm_cxl_iomap_block(dev, addr, length);
-		if (!regs->status)
-			return -ENOMEM;
-	}
-
-	if (map->device_map.mbox.valid) {
-		resource_size_t addr;
-		resource_size_t length;
-
-		addr = phys_addr + map->device_map.mbox.offset;
-		length = map->device_map.mbox.size;
-		regs->mbox = devm_cxl_iomap_block(dev, addr, length);
-		if (!regs->mbox)
-			return -ENOMEM;
-	}
-
-	if (map->device_map.memdev.valid) {
-		resource_size_t addr;
-		resource_size_t length;
-
-		addr = phys_addr + map->device_map.memdev.offset;
-		length = map->device_map.memdev.size;
-		regs->memdev = devm_cxl_iomap_block(dev, addr, length);
-		if (!regs->memdev)
-			return -ENOMEM;
-	}
-
-	return 0;
-}
-EXPORT_SYMBOL_GPL(cxl_map_device_regs);
-
-/**
  * __cxl_driver_register - register a driver for the cxl bus
  * @cxl_drv: cxl driver structure to attach
  * @owner: owning module/driver
@@ -1053,12 +633,26 @@ EXPORT_SYMBOL_GPL(cxl_bus_type);
 
 static __init int cxl_core_init(void)
 {
-	return bus_register(&cxl_bus_type);
+	int rc;
+
+	rc = cxl_memdev_init();
+	if (rc)
+		return rc;
+
+	rc = bus_register(&cxl_bus_type);
+	if (rc)
+		goto err;
+	return 0;
+
+err:
+	cxl_memdev_exit();
+	return rc;
 }
 
 static void cxl_core_exit(void)
 {
 	bus_unregister(&cxl_bus_type);
+	cxl_memdev_exit();
 }
 
 module_init(cxl_core_init);
diff --git a/drivers/cxl/core/core.h b/drivers/cxl/core/core.h
new file mode 100644
index 000000000000..036a3c8106b4
--- /dev/null
+++ b/drivers/cxl/core/core.h
@@ -0,0 +1,20 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Copyright(c) 2020 Intel Corporation. */
+
+#ifndef __CXL_CORE_H__
+#define __CXL_CORE_H__
+
+extern const struct device_type cxl_nvdimm_bridge_type;
+extern const struct device_type cxl_nvdimm_type;
+
+extern struct attribute_group cxl_base_attribute_group;
+
+static inline void unregister_cxl_dev(void *dev)
+{
+	device_unregister(dev);
+}
+
+int cxl_memdev_init(void);
+void cxl_memdev_exit(void);
+
+#endif /* __CXL_CORE_H__ */
diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
new file mode 100644
index 000000000000..a9c317e32010
--- /dev/null
+++ b/drivers/cxl/core/memdev.c
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2020 Intel Corporation. */
+
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/idr.h>
+#include <linux/pci.h>
+#include <cxlmem.h>
+#include "core.h"
+
+/*
+ * An entire PCI topology full of devices should be enough for any
+ * config
+ */
+#define CXL_MEM_MAX_DEVS 65536
+
+static int cxl_mem_major;
+static DEFINE_IDA(cxl_memdev_ida);
+
+static void cxl_memdev_release(struct device *dev)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+
+	ida_free(&cxl_memdev_ida, cxlmd->id);
+	kfree(cxlmd);
+}
+
+static char *cxl_memdev_devnode(struct device *dev, umode_t *mode, kuid_t *uid,
+				kgid_t *gid)
+{
+	return kasprintf(GFP_KERNEL, "cxl/%s", dev_name(dev));
+}
+
+static ssize_t firmware_version_show(struct device *dev,
+				     struct device_attribute *attr, char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+
+	return sysfs_emit(buf, "%.16s\n", cxlm->firmware_version);
+}
+static DEVICE_ATTR_RO(firmware_version);
+
+static ssize_t payload_max_show(struct device *dev,
+				struct device_attribute *attr, char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+
+	return sysfs_emit(buf, "%zu\n", cxlm->payload_size);
+}
+static DEVICE_ATTR_RO(payload_max);
+
+static ssize_t label_storage_size_show(struct device *dev,
+				       struct device_attribute *attr, char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+
+	return sysfs_emit(buf, "%zu\n", cxlm->lsa_size);
+}
+static DEVICE_ATTR_RO(label_storage_size);
+
+static ssize_t ram_size_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+	unsigned long long len = range_len(&cxlm->ram_range);
+
+	return sysfs_emit(buf, "%#llx\n", len);
+}
+
+static struct device_attribute dev_attr_ram_size =
+	__ATTR(size, 0444, ram_size_show, NULL);
+
+static ssize_t pmem_size_show(struct device *dev, struct device_attribute *attr,
+			      char *buf)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+	struct cxl_mem *cxlm = cxlmd->cxlm;
+	unsigned long long len = range_len(&cxlm->pmem_range);
+
+	return sysfs_emit(buf, "%#llx\n", len);
+}
+
+static struct device_attribute dev_attr_pmem_size =
+	__ATTR(size, 0444, pmem_size_show, NULL);
+
+static struct attribute *cxl_memdev_attributes[] = {
+	&dev_attr_firmware_version.attr,
+	&dev_attr_payload_max.attr,
+	&dev_attr_label_storage_size.attr,
+	NULL,
+};
+
+static struct attribute *cxl_memdev_pmem_attributes[] = {
+	&dev_attr_pmem_size.attr,
+	NULL,
+};
+
+static struct attribute *cxl_memdev_ram_attributes[] = {
+	&dev_attr_ram_size.attr,
+	NULL,
+};
+
+static struct attribute_group cxl_memdev_attribute_group = {
+	.attrs = cxl_memdev_attributes,
+};
+
+static struct attribute_group cxl_memdev_ram_attribute_group = {
+	.name = "ram",
+	.attrs = cxl_memdev_ram_attributes,
+};
+
+static struct attribute_group cxl_memdev_pmem_attribute_group = {
+	.name = "pmem",
+	.attrs = cxl_memdev_pmem_attributes,
+};
+
+static const struct attribute_group *cxl_memdev_attribute_groups[] = {
+	&cxl_memdev_attribute_group,
+	&cxl_memdev_ram_attribute_group,
+	&cxl_memdev_pmem_attribute_group,
+	NULL,
+};
+
+static const struct device_type cxl_memdev_type = {
+	.name = "cxl_memdev",
+	.release = cxl_memdev_release,
+	.devnode = cxl_memdev_devnode,
+	.groups = cxl_memdev_attribute_groups,
+};
+
+static void cxl_memdev_unregister(void *_cxlmd)
+{
+	struct cxl_memdev *cxlmd = _cxlmd;
+	struct device *dev = &cxlmd->dev;
+	struct cdev *cdev = &cxlmd->cdev;
+	const struct cdevm_file_operations *cdevm_fops;
+
+	cdevm_fops = container_of(cdev->ops, typeof(*cdevm_fops), fops);
+	cdevm_fops->shutdown(dev);
+
+	cdev_device_del(&cxlmd->cdev, dev);
+	put_device(dev);
+}
+
+static struct cxl_memdev *cxl_memdev_alloc(struct cxl_mem *cxlm,
+					   const struct file_operations *fops)
+{
+	struct pci_dev *pdev = cxlm->pdev;
+	struct cxl_memdev *cxlmd;
+	struct device *dev;
+	struct cdev *cdev;
+	int rc;
+
+	cxlmd = kzalloc(sizeof(*cxlmd), GFP_KERNEL);
+	if (!cxlmd)
+		return ERR_PTR(-ENOMEM);
+
+	rc = ida_alloc_range(&cxl_memdev_ida, 0, CXL_MEM_MAX_DEVS, GFP_KERNEL);
+	if (rc < 0)
+		goto err;
+	cxlmd->id = rc;
+
+	dev = &cxlmd->dev;
+	device_initialize(dev);
+	dev->parent = &pdev->dev;
+	dev->bus = &cxl_bus_type;
+	dev->devt = MKDEV(cxl_mem_major, cxlmd->id);
+	dev->type = &cxl_memdev_type;
+	device_set_pm_not_required(dev);
+
+	cdev = &cxlmd->cdev;
+	cdev_init(cdev, fops);
+	return cxlmd;
+
+err:
+	kfree(cxlmd);
+	return ERR_PTR(rc);
+}
+
+struct cxl_memdev *
+devm_cxl_add_memdev(struct device *host, struct cxl_mem *cxlm,
+		    const struct cdevm_file_operations *cdevm_fops)
+{
+	struct cxl_memdev *cxlmd;
+	struct device *dev;
+	struct cdev *cdev;
+	int rc;
+
+	cxlmd = cxl_memdev_alloc(cxlm, &cdevm_fops->fops);
+	if (IS_ERR(cxlmd))
+		return cxlmd;
+
+	dev = &cxlmd->dev;
+	rc = dev_set_name(dev, "mem%d", cxlmd->id);
+	if (rc)
+		goto err;
+
+	/*
+	 * Activate ioctl operations, no cxl_memdev_rwsem manipulation
+	 * needed as this is ordered with cdev_add() publishing the device.
+	 */
+	cxlmd->cxlm = cxlm;
+
+	cdev = &cxlmd->cdev;
+	rc = cdev_device_add(cdev, dev);
+	if (rc)
+		goto err;
+
+	rc = devm_add_action_or_reset(host, cxl_memdev_unregister, cxlmd);
+	if (rc)
+		return ERR_PTR(rc);
+	return cxlmd;
+
+err:
+	/*
+	 * The cdev was briefly live, shutdown any ioctl operations that
+	 * saw that state.
+	 */
+	cdevm_fops->shutdown(dev);
+	put_device(dev);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(devm_cxl_add_memdev);
+
+__init int cxl_memdev_init(void)
+{
+	dev_t devt;
+	int rc;
+
+	rc = alloc_chrdev_region(&devt, 0, CXL_MEM_MAX_DEVS, "cxl");
+	if (rc)
+		return rc;
+
+	cxl_mem_major = MAJOR(devt);
+
+	return 0;
+}
+
+void cxl_memdev_exit(void)
+{
+	unregister_chrdev_region(MKDEV(cxl_mem_major, 0), CXL_MEM_MAX_DEVS);
+}
diff --git a/drivers/cxl/core/pmem.c b/drivers/cxl/core/pmem.c
new file mode 100644
index 000000000000..d24570f5b8ba
--- /dev/null
+++ b/drivers/cxl/core/pmem.c
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2020 Intel Corporation. */
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <cxlmem.h>
+#include <cxl.h>
+#include "core.h"
+
+/**
+ * DOC: cxl pmem
+ *
+ * The core CXL PMEM infrastructure supports persistent memory
+ * provisioning and serves as a bridge to the LIBNVDIMM subsystem. A CXL
+ * 'bridge' device is added at the root of a CXL device topology if
+ * platform firmware advertises at least one persistent memory capable
+ * CXL window. That root-level bridge corresponds to a LIBNVDIMM 'bus'
+ * device. Then for each cxl_memdev in the CXL device topology a bridge
+ * device is added to host a LIBNVDIMM dimm object. When these bridges
+ * are registered native LIBNVDIMM uapis are translated to CXL
+ * operations, for example, namespace label access commands.
+ */
+
+static void cxl_nvdimm_bridge_release(struct device *dev)
+{
+	struct cxl_nvdimm_bridge *cxl_nvb = to_cxl_nvdimm_bridge(dev);
+
+	kfree(cxl_nvb);
+}
+
+static const struct attribute_group *cxl_nvdimm_bridge_attribute_groups[] = {
+	&cxl_base_attribute_group,
+	NULL,
+};
+
+const struct device_type cxl_nvdimm_bridge_type = {
+	.name = "cxl_nvdimm_bridge",
+	.release = cxl_nvdimm_bridge_release,
+	.groups = cxl_nvdimm_bridge_attribute_groups,
+};
+
+struct cxl_nvdimm_bridge *to_cxl_nvdimm_bridge(struct device *dev)
+{
+	if (dev_WARN_ONCE(dev, dev->type != &cxl_nvdimm_bridge_type,
+			  "not a cxl_nvdimm_bridge device\n"))
+		return NULL;
+	return container_of(dev, struct cxl_nvdimm_bridge, dev);
+}
+EXPORT_SYMBOL_GPL(to_cxl_nvdimm_bridge);
+
+static struct cxl_nvdimm_bridge *
+cxl_nvdimm_bridge_alloc(struct cxl_port *port)
+{
+	struct cxl_nvdimm_bridge *cxl_nvb;
+	struct device *dev;
+
+	cxl_nvb = kzalloc(sizeof(*cxl_nvb), GFP_KERNEL);
+	if (!cxl_nvb)
+		return ERR_PTR(-ENOMEM);
+
+	dev = &cxl_nvb->dev;
+	cxl_nvb->port = port;
+	cxl_nvb->state = CXL_NVB_NEW;
+	device_initialize(dev);
+	device_set_pm_not_required(dev);
+	dev->parent = &port->dev;
+	dev->bus = &cxl_bus_type;
+	dev->type = &cxl_nvdimm_bridge_type;
+
+	return cxl_nvb;
+}
+
+static void unregister_nvb(void *_cxl_nvb)
+{
+	struct cxl_nvdimm_bridge *cxl_nvb = _cxl_nvb;
+	bool flush;
+
+	/*
+	 * If the bridge was ever activated then there might be in-flight state
+	 * work to flush. Once the state has been changed to 'dead' then no new
+	 * work can be queued by user-triggered bind.
+	 */
+	device_lock(&cxl_nvb->dev);
+	flush = cxl_nvb->state != CXL_NVB_NEW;
+	cxl_nvb->state = CXL_NVB_DEAD;
+	device_unlock(&cxl_nvb->dev);
+
+	/*
+	 * Even though the device core will trigger device_release_driver()
+	 * before the unregister, it does not know about the fact that
+	 * cxl_nvdimm_bridge_driver defers ->remove() work. So, do the driver
+	 * release not and flush it before tearing down the nvdimm device
+	 * hierarchy.
+	 */
+	device_release_driver(&cxl_nvb->dev);
+	if (flush)
+		flush_work(&cxl_nvb->state_work);
+	device_unregister(&cxl_nvb->dev);
+}
+
+/**
+ * devm_cxl_add_nvdimm_bridge() - add the root of a LIBNVDIMM topology
+ * @host: platform firmware root device
+ * @port: CXL port at the root of a CXL topology
+ *
+ * Return: bridge device that can host cxl_nvdimm objects
+ */
+struct cxl_nvdimm_bridge *devm_cxl_add_nvdimm_bridge(struct device *host,
+						     struct cxl_port *port)
+{
+	struct cxl_nvdimm_bridge *cxl_nvb;
+	struct device *dev;
+	int rc;
+
+	if (!IS_ENABLED(CONFIG_CXL_PMEM))
+		return ERR_PTR(-ENXIO);
+
+	cxl_nvb = cxl_nvdimm_bridge_alloc(port);
+	if (IS_ERR(cxl_nvb))
+		return cxl_nvb;
+
+	dev = &cxl_nvb->dev;
+	rc = dev_set_name(dev, "nvdimm-bridge");
+	if (rc)
+		goto err;
+
+	rc = device_add(dev);
+	if (rc)
+		goto err;
+
+	rc = devm_add_action_or_reset(host, unregister_nvb, cxl_nvb);
+	if (rc)
+		return ERR_PTR(rc);
+
+	return cxl_nvb;
+
+err:
+	put_device(dev);
+	return ERR_PTR(rc);
+}
+EXPORT_SYMBOL_GPL(devm_cxl_add_nvdimm_bridge);
+
+static void cxl_nvdimm_release(struct device *dev)
+{
+	struct cxl_nvdimm *cxl_nvd = to_cxl_nvdimm(dev);
+
+	kfree(cxl_nvd);
+}
+
+static const struct attribute_group *cxl_nvdimm_attribute_groups[] = {
+	&cxl_base_attribute_group,
+	NULL,
+};
+
+const struct device_type cxl_nvdimm_type = {
+	.name = "cxl_nvdimm",
+	.release = cxl_nvdimm_release,
+	.groups = cxl_nvdimm_attribute_groups,
+};
+
+bool is_cxl_nvdimm(struct device *dev)
+{
+	return dev->type == &cxl_nvdimm_type;
+}
+EXPORT_SYMBOL_GPL(is_cxl_nvdimm);
+
+struct cxl_nvdimm *to_cxl_nvdimm(struct device *dev)
+{
+	if (dev_WARN_ONCE(dev, !is_cxl_nvdimm(dev),
+			  "not a cxl_nvdimm device\n"))
+		return NULL;
+	return container_of(dev, struct cxl_nvdimm, dev);
+}
+EXPORT_SYMBOL_GPL(to_cxl_nvdimm);
+
+static struct cxl_nvdimm *cxl_nvdimm_alloc(struct cxl_memdev *cxlmd)
+{
+	struct cxl_nvdimm *cxl_nvd;
+	struct device *dev;
+
+	cxl_nvd = kzalloc(sizeof(*cxl_nvd), GFP_KERNEL);
+	if (!cxl_nvd)
+		return ERR_PTR(-ENOMEM);
+
+	dev = &cxl_nvd->dev;
+	cxl_nvd->cxlmd = cxlmd;
+	device_initialize(dev);
+	device_set_pm_not_required(dev);
+	dev->parent = &cxlmd->dev;
+	dev->bus = &cxl_bus_type;
+	dev->type = &cxl_nvdimm_type;
+
+	return cxl_nvd;
+}
+
+/**
+ * devm_cxl_add_nvdimm() - add a bridge between a cxl_memdev and an nvdimm
+ * @host: same host as @cxlmd
+ * @cxlmd: cxl_memdev instance that will perform LIBNVDIMM operations
+ *
+ * Return: 0 on success negative error code on failure.
+ */
+int devm_cxl_add_nvdimm(struct device *host, struct cxl_memdev *cxlmd)
+{
+	struct cxl_nvdimm *cxl_nvd;
+	struct device *dev;
+	int rc;
+
+	cxl_nvd = cxl_nvdimm_alloc(cxlmd);
+	if (IS_ERR(cxl_nvd))
+		return PTR_ERR(cxl_nvd);
+
+	dev = &cxl_nvd->dev;
+	rc = dev_set_name(dev, "pmem%d", cxlmd->id);
+	if (rc)
+		goto err;
+
+	rc = device_add(dev);
+	if (rc)
+		goto err;
+
+	dev_dbg(host, "%s: register %s\n", dev_name(dev->parent),
+		dev_name(dev));
+
+	return devm_add_action_or_reset(host, unregister_cxl_dev, dev);
+
+err:
+	put_device(dev);
+	return rc;
+}
+EXPORT_SYMBOL_GPL(devm_cxl_add_nvdimm);
diff --git a/drivers/cxl/core/regs.c b/drivers/cxl/core/regs.c
new file mode 100644
index 000000000000..41de4a136ecd
--- /dev/null
+++ b/drivers/cxl/core/regs.c
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/* Copyright(c) 2020 Intel Corporation. */
+#include <linux/io-64-nonatomic-lo-hi.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/pci.h>
+#include <cxlmem.h>
+
+/**
+ * DOC: cxl registers
+ *
+ * CXL device capabilities are enumerated by PCI DVSEC (Designated
+ * Vendor-specific) and / or descriptors provided by platform firmware.
+ * They can be defined as a set like the device and component registers
+ * mandated by CXL Section 8.1.12.2 Memory Device PCIe Capabilities and
+ * Extended Capabilities, or they can be individual capabilities
+ * appended to bridged and endpoint devices.
+ *
+ * Provide common infrastructure for enumerating and mapping these
+ * discrete capabilities.
+ */
+
+/**
+ * cxl_probe_component_regs() - Detect CXL Component register blocks
+ * @dev: Host device of the @base mapping
+ * @base: Mapping containing the HDM Decoder Capability Header
+ * @map: Map object describing the register block information found
+ *
+ * See CXL 2.0 8.2.4 Component Register Layout and Definition
+ * See CXL 2.0 8.2.5.5 CXL Device Register Interface
+ *
+ * Probe for component register information and return it in map object.
+ */
+void cxl_probe_component_regs(struct device *dev, void __iomem *base,
+			      struct cxl_component_reg_map *map)
+{
+	int cap, cap_count;
+	u64 cap_array;
+
+	*map = (struct cxl_component_reg_map) { 0 };
+
+	/*
+	 * CXL.cache and CXL.mem registers are at offset 0x1000 as defined in
+	 * CXL 2.0 8.2.4 Table 141.
+	 */
+	base += CXL_CM_OFFSET;
+
+	cap_array = readq(base + CXL_CM_CAP_HDR_OFFSET);
+
+	if (FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, cap_array) != CM_CAP_HDR_CAP_ID) {
+		dev_err(dev,
+			"Couldn't locate the CXL.cache and CXL.mem capability array header./n");
+		return;
+	}
+
+	/* It's assumed that future versions will be backward compatible */
+	cap_count = FIELD_GET(CXL_CM_CAP_HDR_ARRAY_SIZE_MASK, cap_array);
+
+	for (cap = 1; cap <= cap_count; cap++) {
+		void __iomem *register_block;
+		u32 hdr;
+		int decoder_cnt;
+		u16 cap_id, offset;
+		u32 length;
+
+		hdr = readl(base + cap * 0x4);
+
+		cap_id = FIELD_GET(CXL_CM_CAP_HDR_ID_MASK, hdr);
+		offset = FIELD_GET(CXL_CM_CAP_PTR_MASK, hdr);
+		register_block = base + offset;
+
+		switch (cap_id) {
+		case CXL_CM_CAP_CAP_ID_HDM:
+			dev_dbg(dev, "found HDM decoder capability (0x%x)\n",
+				offset);
+
+			hdr = readl(register_block);
+
+			decoder_cnt = cxl_hdm_decoder_count(hdr);
+			length = 0x20 * decoder_cnt + 0x10;
+
+			map->hdm_decoder.valid = true;
+			map->hdm_decoder.offset = CXL_CM_OFFSET + offset;
+			map->hdm_decoder.size = length;
+			break;
+		default:
+			dev_dbg(dev, "Unknown CM cap ID: %d (0x%x)\n", cap_id,
+				offset);
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(cxl_probe_component_regs);
+
+/**
+ * cxl_probe_device_regs() - Detect CXL Device register blocks
+ * @dev: Host device of the @base mapping
+ * @base: Mapping of CXL 2.0 8.2.8 CXL Device Register Interface
+ * @map: Map object describing the register block information found
+ *
+ * Probe for device register information and return it in map object.
+ */
+void cxl_probe_device_regs(struct device *dev, void __iomem *base,
+			   struct cxl_device_reg_map *map)
+{
+	int cap, cap_count;
+	u64 cap_array;
+
+	*map = (struct cxl_device_reg_map){ 0 };
+
+	cap_array = readq(base + CXLDEV_CAP_ARRAY_OFFSET);
+	if (FIELD_GET(CXLDEV_CAP_ARRAY_ID_MASK, cap_array) !=
+	    CXLDEV_CAP_ARRAY_CAP_ID)
+		return;
+
+	cap_count = FIELD_GET(CXLDEV_CAP_ARRAY_COUNT_MASK, cap_array);
+
+	for (cap = 1; cap <= cap_count; cap++) {
+		u32 offset, length;
+		u16 cap_id;
+
+		cap_id = FIELD_GET(CXLDEV_CAP_HDR_CAP_ID_MASK,
+				   readl(base + cap * 0x10));
+		offset = readl(base + cap * 0x10 + 0x4);
+		length = readl(base + cap * 0x10 + 0x8);
+
+		switch (cap_id) {
+		case CXLDEV_CAP_CAP_ID_DEVICE_STATUS:
+			dev_dbg(dev, "found Status capability (0x%x)\n", offset);
+
+			map->status.valid = true;
+			map->status.offset = offset;
+			map->status.size = length;
+			break;
+		case CXLDEV_CAP_CAP_ID_PRIMARY_MAILBOX:
+			dev_dbg(dev, "found Mailbox capability (0x%x)\n", offset);
+			map->mbox.valid = true;
+			map->mbox.offset = offset;
+			map->mbox.size = length;
+			break;
+		case CXLDEV_CAP_CAP_ID_SECONDARY_MAILBOX:
+			dev_dbg(dev, "found Secondary Mailbox capability (0x%x)\n", offset);
+			break;
+		case CXLDEV_CAP_CAP_ID_MEMDEV:
+			dev_dbg(dev, "found Memory Device capability (0x%x)\n", offset);
+			map->memdev.valid = true;
+			map->memdev.offset = offset;
+			map->memdev.size = length;
+			break;
+		default:
+			if (cap_id >= 0x8000)
+				dev_dbg(dev, "Vendor cap ID: %#x offset: %#x\n", cap_id, offset);
+			else
+				dev_dbg(dev, "Unknown cap ID: %#x offset: %#x\n", cap_id, offset);
+			break;
+		}
+	}
+}
+EXPORT_SYMBOL_GPL(cxl_probe_device_regs);
+
+static void __iomem *devm_cxl_iomap_block(struct device *dev,
+					  resource_size_t addr,
+					  resource_size_t length)
+{
+	void __iomem *ret_val;
+	struct resource *res;
+
+	res = devm_request_mem_region(dev, addr, length, dev_name(dev));
+	if (!res) {
+		resource_size_t end = addr + length - 1;
+
+		dev_err(dev, "Failed to request region %pa-%pa\n", &addr, &end);
+		return NULL;
+	}
+
+	ret_val = devm_ioremap(dev, addr, length);
+	if (!ret_val)
+		dev_err(dev, "Failed to map region %pr\n", res);
+
+	return ret_val;
+}
+
+int cxl_map_component_regs(struct pci_dev *pdev,
+			   struct cxl_component_regs *regs,
+			   struct cxl_register_map *map)
+{
+	struct device *dev = &pdev->dev;
+	resource_size_t phys_addr;
+	resource_size_t length;
+
+	phys_addr = pci_resource_start(pdev, map->barno);
+	phys_addr += map->block_offset;
+
+	phys_addr += map->component_map.hdm_decoder.offset;
+	length = map->component_map.hdm_decoder.size;
+	regs->hdm_decoder = devm_cxl_iomap_block(dev, phys_addr, length);
+	if (!regs->hdm_decoder)
+		return -ENOMEM;
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_map_component_regs);
+
+int cxl_map_device_regs(struct pci_dev *pdev,
+			struct cxl_device_regs *regs,
+			struct cxl_register_map *map)
+{
+	struct device *dev = &pdev->dev;
+	resource_size_t phys_addr;
+
+	phys_addr = pci_resource_start(pdev, map->barno);
+	phys_addr += map->block_offset;
+
+	if (map->device_map.status.valid) {
+		resource_size_t addr;
+		resource_size_t length;
+
+		addr = phys_addr + map->device_map.status.offset;
+		length = map->device_map.status.size;
+		regs->status = devm_cxl_iomap_block(dev, addr, length);
+		if (!regs->status)
+			return -ENOMEM;
+	}
+
+	if (map->device_map.mbox.valid) {
+		resource_size_t addr;
+		resource_size_t length;
+
+		addr = phys_addr + map->device_map.mbox.offset;
+		length = map->device_map.mbox.size;
+		regs->mbox = devm_cxl_iomap_block(dev, addr, length);
+		if (!regs->mbox)
+			return -ENOMEM;
+	}
+
+	if (map->device_map.memdev.valid) {
+		resource_size_t addr;
+		resource_size_t length;
+
+		addr = phys_addr + map->device_map.memdev.offset;
+		length = map->device_map.memdev.size;
+		regs->memdev = devm_cxl_iomap_block(dev, addr, length);
+		if (!regs->memdev)
+			return -ENOMEM;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(cxl_map_device_regs);
diff --git a/drivers/cxl/cxl.h b/drivers/cxl/cxl.h
index b6bda39a59e3..53927f9fa77e 100644
--- a/drivers/cxl/cxl.h
+++ b/drivers/cxl/cxl.h
@@ -140,7 +140,6 @@ struct cxl_device_reg_map {
 };
 
 struct cxl_register_map {
-	struct list_head list;
 	u64 block_offset;
 	u8 reg_type;
 	u8 barno;
diff --git a/drivers/cxl/mem.h b/drivers/cxl/cxlmem.h
index 8f02d02b26b4..6c0b1e2ea97c 100644
--- a/drivers/cxl/mem.h
+++ b/drivers/cxl/cxlmem.h
@@ -28,11 +28,20 @@
 	(FIELD_GET(CXLMDEV_RESET_NEEDED_MASK, status) !=                       \
 	 CXLMDEV_RESET_NEEDED_NOT)
 
-/*
- * An entire PCI topology full of devices should be enough for any
- * config
+/**
+ * struct cdevm_file_operations - devm coordinated cdev file operations
+ * @fops: file operations that are synchronized against @shutdown
+ * @shutdown: disconnect driver data
+ *
+ * @shutdown is invoked in the devres release path to disconnect any
+ * driver instance data from @dev. It assumes synchronization with any
+ * fops operation that requires driver data. After @shutdown an
+ * operation may only reference @device data.
  */
-#define CXL_MEM_MAX_DEVS 65536
+struct cdevm_file_operations {
+	struct file_operations fops;
+	void (*shutdown)(struct device *dev);
+};
 
 /**
  * struct cxl_memdev - CXL bus object representing a Type-3 Memory Device
@@ -48,6 +57,15 @@ struct cxl_memdev {
 	int id;
 };
 
+static inline struct cxl_memdev *to_cxl_memdev(struct device *dev)
+{
+	return container_of(dev, struct cxl_memdev, dev);
+}
+
+struct cxl_memdev *
+devm_cxl_add_memdev(struct device *host, struct cxl_mem *cxlm,
+		    const struct cdevm_file_operations *cdevm_fops);
+
 /**
  * struct cxl_mem - A CXL memory device
  * @pdev: The PCI device associated with this CXL device.
@@ -77,5 +95,14 @@ struct cxl_mem {
 
 	struct range pmem_range;
 	struct range ram_range;
+	u64 total_bytes;
+	u64 volatile_only_bytes;
+	u64 persistent_only_bytes;
+	u64 partition_align_bytes;
+
+	u64 active_volatile_bytes;
+	u64 active_persistent_bytes;
+	u64 next_volatile_bytes;
+	u64 next_persistent_bytes;
 };
 #endif /* __CXL_MEM_H__ */
diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
index 4cf351a3cf99..8e45aa07d662 100644
--- a/drivers/cxl/pci.c
+++ b/drivers/cxl/pci.c
@@ -12,9 +12,9 @@
 #include <linux/pci.h>
 #include <linux/io.h>
 #include <linux/io-64-nonatomic-lo-hi.h>
+#include "cxlmem.h"
 #include "pci.h"
 #include "cxl.h"
-#include "mem.h"
 
 /**
  * DOC: cxl pci
@@ -64,6 +64,15 @@ enum opcode {
 	CXL_MBOX_OP_MAX			= 0x10000
 };
 
+/*
+ * CXL 2.0 - Memory capacity multiplier
+ * See Section 8.2.9.5
+ *
+ * Volatile, Persistent, and Partition capacities are specified to be in
+ * multiples of 256MB - define a multiplier to convert to/from bytes.
+ */
+#define CXL_CAPACITY_MULTIPLIER SZ_256M
+
 /**
  * struct mbox_cmd - A command to be submitted to hardware.
  * @opcode: (input) The command set and command submitted to hardware.
@@ -94,8 +103,6 @@ struct mbox_cmd {
 #define CXL_MBOX_SUCCESS 0
 };
 
-static int cxl_mem_major;
-static DEFINE_IDA(cxl_memdev_ida);
 static DECLARE_RWSEM(cxl_memdev_rwsem);
 static struct dentry *cxl_debugfs;
 static bool cxl_raw_allow_all;
@@ -568,7 +575,7 @@ static bool cxl_mem_raw_command_allowed(u16 opcode)
 	if (!IS_ENABLED(CONFIG_CXL_MEM_RAW_COMMANDS))
 		return false;
 
-	if (security_locked_down(LOCKDOWN_NONE))
+	if (security_locked_down(LOCKDOWN_PCI_ACCESS))
 		return false;
 
 	if (cxl_raw_allow_all)
@@ -806,13 +813,25 @@ static int cxl_memdev_release_file(struct inode *inode, struct file *file)
 	return 0;
 }
 
-static const struct file_operations cxl_memdev_fops = {
-	.owner = THIS_MODULE,
-	.unlocked_ioctl = cxl_memdev_ioctl,
-	.open = cxl_memdev_open,
-	.release = cxl_memdev_release_file,
-	.compat_ioctl = compat_ptr_ioctl,
-	.llseek = noop_llseek,
+static void cxl_memdev_shutdown(struct device *dev)
+{
+	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
+
+	down_write(&cxl_memdev_rwsem);
+	cxlmd->cxlm = NULL;
+	up_write(&cxl_memdev_rwsem);
+}
+
+static const struct cdevm_file_operations cxl_memdev_fops = {
+	.fops = {
+		.owner = THIS_MODULE,
+		.unlocked_ioctl = cxl_memdev_ioctl,
+		.open = cxl_memdev_open,
+		.release = cxl_memdev_release_file,
+		.compat_ioctl = compat_ptr_ioctl,
+		.llseek = noop_llseek,
+	},
+	.shutdown = cxl_memdev_shutdown,
 };
 
 static inline struct cxl_mem_command *cxl_mem_find_command(u16 opcode)
@@ -1022,8 +1041,8 @@ static int cxl_probe_regs(struct cxl_mem *cxlm, void __iomem *base,
 		    !dev_map->memdev.valid) {
 			dev_err(dev, "registers not found: %s%s%s\n",
 				!dev_map->status.valid ? "status " : "",
-				!dev_map->mbox.valid ? "status " : "",
-				!dev_map->memdev.valid ? "status " : "");
+				!dev_map->mbox.valid ? "mbox " : "",
+				!dev_map->memdev.valid ? "memdev " : "");
 			return -ENXIO;
 		}
 
@@ -1081,9 +1100,8 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 	struct device *dev = &pdev->dev;
 	u32 regloc_size, regblocks;
 	void __iomem *base;
-	int regloc, i;
-	struct cxl_register_map *map, *n;
-	LIST_HEAD(register_maps);
+	int regloc, i, n_maps;
+	struct cxl_register_map *map, maps[CXL_REGLOC_RBI_TYPES];
 	int ret = 0;
 
 	regloc = cxl_mem_dvsec(pdev, PCI_DVSEC_ID_CXL_REGLOC_DVSEC_ID);
@@ -1102,20 +1120,12 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 	regloc += PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET;
 	regblocks = (regloc_size - PCI_DVSEC_ID_CXL_REGLOC_BLOCK1_OFFSET) / 8;
 
-	for (i = 0; i < regblocks; i++, regloc += 8) {
+	for (i = 0, n_maps = 0; i < regblocks; i++, regloc += 8) {
 		u32 reg_lo, reg_hi;
 		u8 reg_type;
 		u64 offset;
 		u8 bar;
 
-		map = kzalloc(sizeof(*map), GFP_KERNEL);
-		if (!map) {
-			ret = -ENOMEM;
-			goto free_maps;
-		}
-
-		list_add(&map->list, &register_maps);
-
 		pci_read_config_dword(pdev, regloc, &reg_lo);
 		pci_read_config_dword(pdev, regloc + 4, &reg_hi);
 
@@ -1125,12 +1135,15 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 		dev_dbg(dev, "Found register block in bar %u @ 0x%llx of type %u\n",
 			bar, offset, reg_type);
 
+		/* Ignore unknown register block types */
+		if (reg_type > CXL_REGLOC_RBI_MEMDEV)
+			continue;
+
 		base = cxl_mem_map_regblock(cxlm, bar, offset);
-		if (!base) {
-			ret = -ENOMEM;
-			goto free_maps;
-		}
+		if (!base)
+			return -ENOMEM;
 
+		map = &maps[n_maps];
 		map->barno = bar;
 		map->block_offset = offset;
 		map->reg_type = reg_type;
@@ -1141,240 +1154,22 @@ static int cxl_mem_setup_regs(struct cxl_mem *cxlm)
 		cxl_mem_unmap_regblock(cxlm, base);
 
 		if (ret)
-			goto free_maps;
+			return ret;
+
+		n_maps++;
 	}
 
 	pci_release_mem_regions(pdev);
 
-	list_for_each_entry(map, &register_maps, list) {
-		ret = cxl_map_regs(cxlm, map);
+	for (i = 0; i < n_maps; i++) {
+		ret = cxl_map_regs(cxlm, &maps[i]);
 		if (ret)
-			goto free_maps;
-	}
-
-free_maps:
-	list_for_each_entry_safe(map, n, &register_maps, list) {
-		list_del(&map->list);
-		kfree(map);
+			break;
 	}
 
 	return ret;
 }
 
-static struct cxl_memdev *to_cxl_memdev(struct device *dev)
-{
-	return container_of(dev, struct cxl_memdev, dev);
-}
-
-static void cxl_memdev_release(struct device *dev)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-
-	ida_free(&cxl_memdev_ida, cxlmd->id);
-	kfree(cxlmd);
-}
-
-static char *cxl_memdev_devnode(struct device *dev, umode_t *mode, kuid_t *uid,
-				kgid_t *gid)
-{
-	return kasprintf(GFP_KERNEL, "cxl/%s", dev_name(dev));
-}
-
-static ssize_t firmware_version_show(struct device *dev,
-				     struct device_attribute *attr, char *buf)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-	struct cxl_mem *cxlm = cxlmd->cxlm;
-
-	return sysfs_emit(buf, "%.16s\n", cxlm->firmware_version);
-}
-static DEVICE_ATTR_RO(firmware_version);
-
-static ssize_t payload_max_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-	struct cxl_mem *cxlm = cxlmd->cxlm;
-
-	return sysfs_emit(buf, "%zu\n", cxlm->payload_size);
-}
-static DEVICE_ATTR_RO(payload_max);
-
-static ssize_t label_storage_size_show(struct device *dev,
-				struct device_attribute *attr, char *buf)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-	struct cxl_mem *cxlm = cxlmd->cxlm;
-
-	return sysfs_emit(buf, "%zu\n", cxlm->lsa_size);
-}
-static DEVICE_ATTR_RO(label_storage_size);
-
-static ssize_t ram_size_show(struct device *dev, struct device_attribute *attr,
-			     char *buf)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-	struct cxl_mem *cxlm = cxlmd->cxlm;
-	unsigned long long len = range_len(&cxlm->ram_range);
-
-	return sysfs_emit(buf, "%#llx\n", len);
-}
-
-static struct device_attribute dev_attr_ram_size =
-	__ATTR(size, 0444, ram_size_show, NULL);
-
-static ssize_t pmem_size_show(struct device *dev, struct device_attribute *attr,
-			      char *buf)
-{
-	struct cxl_memdev *cxlmd = to_cxl_memdev(dev);
-	struct cxl_mem *cxlm = cxlmd->cxlm;
-	unsigned long long len = range_len(&cxlm->pmem_range);
-
-	return sysfs_emit(buf, "%#llx\n", len);
-}
-
-static struct device_attribute dev_attr_pmem_size =
-	__ATTR(size, 0444, pmem_size_show, NULL);
-
-static struct attribute *cxl_memdev_attributes[] = {
-	&dev_attr_firmware_version.attr,
-	&dev_attr_payload_max.attr,
-	&dev_attr_label_storage_size.attr,
-	NULL,
-};
-
-static struct attribute *cxl_memdev_pmem_attributes[] = {
-	&dev_attr_pmem_size.attr,
-	NULL,
-};
-
-static struct attribute *cxl_memdev_ram_attributes[] = {
-	&dev_attr_ram_size.attr,
-	NULL,
-};
-
-static struct attribute_group cxl_memdev_attribute_group = {
-	.attrs = cxl_memdev_attributes,
-};
-
-static struct attribute_group cxl_memdev_ram_attribute_group = {
-	.name = "ram",
-	.attrs = cxl_memdev_ram_attributes,
-};
-
-static struct attribute_group cxl_memdev_pmem_attribute_group = {
-	.name = "pmem",
-	.attrs = cxl_memdev_pmem_attributes,
-};
-
-static const struct attribute_group *cxl_memdev_attribute_groups[] = {
-	&cxl_memdev_attribute_group,
-	&cxl_memdev_ram_attribute_group,
-	&cxl_memdev_pmem_attribute_group,
-	NULL,
-};
-
-static const struct device_type cxl_memdev_type = {
-	.name = "cxl_memdev",
-	.release = cxl_memdev_release,
-	.devnode = cxl_memdev_devnode,
-	.groups = cxl_memdev_attribute_groups,
-};
-
-static void cxl_memdev_shutdown(struct cxl_memdev *cxlmd)
-{
-	down_write(&cxl_memdev_rwsem);
-	cxlmd->cxlm = NULL;
-	up_write(&cxl_memdev_rwsem);
-}
-
-static void cxl_memdev_unregister(void *_cxlmd)
-{
-	struct cxl_memdev *cxlmd = _cxlmd;
-	struct device *dev = &cxlmd->dev;
-
-	cdev_device_del(&cxlmd->cdev, dev);
-	cxl_memdev_shutdown(cxlmd);
-	put_device(dev);
-}
-
-static struct cxl_memdev *cxl_memdev_alloc(struct cxl_mem *cxlm)
-{
-	struct pci_dev *pdev = cxlm->pdev;
-	struct cxl_memdev *cxlmd;
-	struct device *dev;
-	struct cdev *cdev;
-	int rc;
-
-	cxlmd = kzalloc(sizeof(*cxlmd), GFP_KERNEL);
-	if (!cxlmd)
-		return ERR_PTR(-ENOMEM);
-
-	rc = ida_alloc_range(&cxl_memdev_ida, 0, CXL_MEM_MAX_DEVS, GFP_KERNEL);
-	if (rc < 0)
-		goto err;
-	cxlmd->id = rc;
-
-	dev = &cxlmd->dev;
-	device_initialize(dev);
-	dev->parent = &pdev->dev;
-	dev->bus = &cxl_bus_type;
-	dev->devt = MKDEV(cxl_mem_major, cxlmd->id);
-	dev->type = &cxl_memdev_type;
-	device_set_pm_not_required(dev);
-
-	cdev = &cxlmd->cdev;
-	cdev_init(cdev, &cxl_memdev_fops);
-	return cxlmd;
-
-err:
-	kfree(cxlmd);
-	return ERR_PTR(rc);
-}
-
-static struct cxl_memdev *devm_cxl_add_memdev(struct device *host,
-					      struct cxl_mem *cxlm)
-{
-	struct cxl_memdev *cxlmd;
-	struct device *dev;
-	struct cdev *cdev;
-	int rc;
-
-	cxlmd = cxl_memdev_alloc(cxlm);
-	if (IS_ERR(cxlmd))
-		return cxlmd;
-
-	dev = &cxlmd->dev;
-	rc = dev_set_name(dev, "mem%d", cxlmd->id);
-	if (rc)
-		goto err;
-
-	/*
-	 * Activate ioctl operations, no cxl_memdev_rwsem manipulation
-	 * needed as this is ordered with cdev_add() publishing the device.
-	 */
-	cxlmd->cxlm = cxlm;
-
-	cdev = &cxlmd->cdev;
-	rc = cdev_device_add(cdev, dev);
-	if (rc)
-		goto err;
-
-	rc = devm_add_action_or_reset(host, cxl_memdev_unregister, cxlmd);
-	if (rc)
-		return ERR_PTR(rc);
-	return cxlmd;
-
-err:
-	/*
-	 * The cdev was briefly live, shutdown any ioctl operations that
-	 * saw that state.
-	 */
-	cxl_memdev_shutdown(cxlmd);
-	put_device(dev);
-	return ERR_PTR(rc);
-}
-
 static int cxl_xfer_log(struct cxl_mem *cxlm, uuid_t *uuid, u32 size, u8 *out)
 {
 	u32 remaining = size;
@@ -1469,6 +1264,53 @@ static struct cxl_mbox_get_supported_logs *cxl_get_gsl(struct cxl_mem *cxlm)
 }
 
 /**
+ * cxl_mem_get_partition_info - Get partition info
+ * @cxlm: The device to act on
+ * @active_volatile_bytes: returned active volatile capacity
+ * @active_persistent_bytes: returned active persistent capacity
+ * @next_volatile_bytes: return next volatile capacity
+ * @next_persistent_bytes: return next persistent capacity
+ *
+ * Retrieve the current partition info for the device specified.  If not 0, the
+ * 'next' values are pending and take affect on next cold reset.
+ *
+ * Return: 0 if no error: or the result of the mailbox command.
+ *
+ * See CXL @8.2.9.5.2.1 Get Partition Info
+ */
+static int cxl_mem_get_partition_info(struct cxl_mem *cxlm,
+				      u64 *active_volatile_bytes,
+				      u64 *active_persistent_bytes,
+				      u64 *next_volatile_bytes,
+				      u64 *next_persistent_bytes)
+{
+	struct cxl_mbox_get_partition_info {
+		__le64 active_volatile_cap;
+		__le64 active_persistent_cap;
+		__le64 next_volatile_cap;
+		__le64 next_persistent_cap;
+	} __packed pi;
+	int rc;
+
+	rc = cxl_mem_mbox_send_cmd(cxlm, CXL_MBOX_OP_GET_PARTITION_INFO,
+				   NULL, 0, &pi, sizeof(pi));
+	if (rc)
+		return rc;
+
+	*active_volatile_bytes = le64_to_cpu(pi.active_volatile_cap);
+	*active_persistent_bytes = le64_to_cpu(pi.active_persistent_cap);
+	*next_volatile_bytes = le64_to_cpu(pi.next_volatile_cap);
+	*next_persistent_bytes = le64_to_cpu(pi.next_volatile_cap);
+
+	*active_volatile_bytes *= CXL_CAPACITY_MULTIPLIER;
+	*active_persistent_bytes *= CXL_CAPACITY_MULTIPLIER;
+	*next_volatile_bytes *= CXL_CAPACITY_MULTIPLIER;
+	*next_persistent_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	return 0;
+}
+
+/**
  * cxl_mem_enumerate_cmds() - Enumerate commands for a device.
  * @cxlm: The device.
  *
@@ -1564,16 +1406,27 @@ static int cxl_mem_identify(struct cxl_mem *cxlm)
 	if (rc < 0)
 		return rc;
 
-	/*
-	 * TODO: enumerate DPA map, as 'ram' and 'pmem' do not alias.
-	 * For now, only the capacity is exported in sysfs
-	 */
-	cxlm->ram_range.start = 0;
-	cxlm->ram_range.end = le64_to_cpu(id.volatile_capacity) * SZ_256M - 1;
+	cxlm->total_bytes = le64_to_cpu(id.total_capacity);
+	cxlm->total_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	cxlm->volatile_only_bytes = le64_to_cpu(id.volatile_capacity);
+	cxlm->volatile_only_bytes *= CXL_CAPACITY_MULTIPLIER;
 
-	cxlm->pmem_range.start = 0;
-	cxlm->pmem_range.end =
-		le64_to_cpu(id.persistent_capacity) * SZ_256M - 1;
+	cxlm->persistent_only_bytes = le64_to_cpu(id.persistent_capacity);
+	cxlm->persistent_only_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	cxlm->partition_align_bytes = le64_to_cpu(id.partition_align);
+	cxlm->partition_align_bytes *= CXL_CAPACITY_MULTIPLIER;
+
+	dev_dbg(&cxlm->pdev->dev, "Identify Memory Device\n"
+		"     total_bytes = %#llx\n"
+		"     volatile_only_bytes = %#llx\n"
+		"     persistent_only_bytes = %#llx\n"
+		"     partition_align_bytes = %#llx\n",
+			cxlm->total_bytes,
+			cxlm->volatile_only_bytes,
+			cxlm->persistent_only_bytes,
+			cxlm->partition_align_bytes);
 
 	cxlm->lsa_size = le32_to_cpu(id.lsa_size);
 	memcpy(cxlm->firmware_version, id.fw_revision, sizeof(id.fw_revision));
@@ -1581,6 +1434,49 @@ static int cxl_mem_identify(struct cxl_mem *cxlm)
 	return 0;
 }
 
+static int cxl_mem_create_range_info(struct cxl_mem *cxlm)
+{
+	int rc;
+
+	if (cxlm->partition_align_bytes == 0) {
+		cxlm->ram_range.start = 0;
+		cxlm->ram_range.end = cxlm->volatile_only_bytes - 1;
+		cxlm->pmem_range.start = cxlm->volatile_only_bytes;
+		cxlm->pmem_range.end = cxlm->volatile_only_bytes +
+					cxlm->persistent_only_bytes - 1;
+		return 0;
+	}
+
+	rc = cxl_mem_get_partition_info(cxlm,
+					&cxlm->active_volatile_bytes,
+					&cxlm->active_persistent_bytes,
+					&cxlm->next_volatile_bytes,
+					&cxlm->next_persistent_bytes);
+	if (rc < 0) {
+		dev_err(&cxlm->pdev->dev, "Failed to query partition information\n");
+		return rc;
+	}
+
+	dev_dbg(&cxlm->pdev->dev, "Get Partition Info\n"
+		"     active_volatile_bytes = %#llx\n"
+		"     active_persistent_bytes = %#llx\n"
+		"     next_volatile_bytes = %#llx\n"
+		"     next_persistent_bytes = %#llx\n",
+			cxlm->active_volatile_bytes,
+			cxlm->active_persistent_bytes,
+			cxlm->next_volatile_bytes,
+			cxlm->next_persistent_bytes);
+
+	cxlm->ram_range.start = 0;
+	cxlm->ram_range.end = cxlm->active_volatile_bytes - 1;
+
+	cxlm->pmem_range.start = cxlm->active_volatile_bytes;
+	cxlm->pmem_range.end = cxlm->active_volatile_bytes +
+				cxlm->active_persistent_bytes - 1;
+
+	return 0;
+}
+
 static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct cxl_memdev *cxlmd;
@@ -1611,7 +1507,11 @@ static int cxl_mem_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	if (rc)
 		return rc;
 
-	cxlmd = devm_cxl_add_memdev(&pdev->dev, cxlm);
+	rc = cxl_mem_create_range_info(cxlm);
+	if (rc)
+		return rc;
+
+	cxlmd = devm_cxl_add_memdev(&pdev->dev, cxlm, &cxl_memdev_fops);
 	if (IS_ERR(cxlmd))
 		return PTR_ERR(cxlmd);
 
@@ -1640,25 +1540,15 @@ static struct pci_driver cxl_mem_driver = {
 static __init int cxl_mem_init(void)
 {
 	struct dentry *mbox_debugfs;
-	dev_t devt;
 	int rc;
 
 	/* Double check the anonymous union trickery in struct cxl_regs */
 	BUILD_BUG_ON(offsetof(struct cxl_regs, memdev) !=
 		     offsetof(struct cxl_regs, device_regs.memdev));
 
-	rc = alloc_chrdev_region(&devt, 0, CXL_MEM_MAX_DEVS, "cxl");
-	if (rc)
-		return rc;
-
-	cxl_mem_major = MAJOR(devt);
-
 	rc = pci_register_driver(&cxl_mem_driver);
-	if (rc) {
-		unregister_chrdev_region(MKDEV(cxl_mem_major, 0),
-					 CXL_MEM_MAX_DEVS);
+	if (rc)
 		return rc;
-	}
 
 	cxl_debugfs = debugfs_create_dir("cxl", NULL);
 	mbox_debugfs = debugfs_create_dir("mbox", cxl_debugfs);
@@ -1672,7 +1562,6 @@ static __exit void cxl_mem_exit(void)
 {
 	debugfs_remove_recursive(cxl_debugfs);
 	pci_unregister_driver(&cxl_mem_driver);
-	unregister_chrdev_region(MKDEV(cxl_mem_major, 0), CXL_MEM_MAX_DEVS);
 }
 
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/cxl/pci.h b/drivers/cxl/pci.h
index dad7a831f65f..8c1a58813816 100644
--- a/drivers/cxl/pci.h
+++ b/drivers/cxl/pci.h
@@ -25,6 +25,7 @@
 #define CXL_REGLOC_RBI_COMPONENT 1
 #define CXL_REGLOC_RBI_VIRT 2
 #define CXL_REGLOC_RBI_MEMDEV 3
+#define CXL_REGLOC_RBI_TYPES CXL_REGLOC_RBI_MEMDEV + 1
 
 #define CXL_REGLOC_ADDR_MASK GENMASK(31, 16)
 
diff --git a/drivers/cxl/pmem.c b/drivers/cxl/pmem.c
index 0088e41dd2f3..9652c3ee41e7 100644
--- a/drivers/cxl/pmem.c
+++ b/drivers/cxl/pmem.c
@@ -6,7 +6,7 @@
 #include <linux/ndctl.h>
 #include <linux/async.h>
 #include <linux/slab.h>
-#include "mem.h"
+#include "cxlmem.h"
 #include "cxl.h"
 
 /*
diff --git a/drivers/dax/kmem.c b/drivers/dax/kmem.c
index ac231cc36359..a37622060fff 100644
--- a/drivers/dax/kmem.c
+++ b/drivers/dax/kmem.c
@@ -37,15 +37,16 @@ static int dax_kmem_range(struct dev_dax *dev_dax, int i, struct range *r)
 
 struct dax_kmem_data {
 	const char *res_name;
+	int mgid;
 	struct resource *res[];
 };
 
 static int dev_dax_kmem_probe(struct dev_dax *dev_dax)
 {
 	struct device *dev = &dev_dax->dev;
+	unsigned long total_len = 0;
 	struct dax_kmem_data *data;
-	int rc = -ENOMEM;
-	int i, mapped = 0;
+	int i, rc, mapped = 0;
 	int numa_node;
 
 	/*
@@ -61,24 +62,44 @@ static int dev_dax_kmem_probe(struct dev_dax *dev_dax)
 		return -EINVAL;
 	}
 
+	for (i = 0; i < dev_dax->nr_range; i++) {
+		struct range range;
+
+		rc = dax_kmem_range(dev_dax, i, &range);
+		if (rc) {
+			dev_info(dev, "mapping%d: %#llx-%#llx too small after alignment\n",
+					i, range.start, range.end);
+			continue;
+		}
+		total_len += range_len(&range);
+	}
+
+	if (!total_len) {
+		dev_warn(dev, "rejecting DAX region without any memory after alignment\n");
+		return -EINVAL;
+	}
+
 	data = kzalloc(struct_size(data, res, dev_dax->nr_range), GFP_KERNEL);
 	if (!data)
 		return -ENOMEM;
 
+	rc = -ENOMEM;
 	data->res_name = kstrdup(dev_name(dev), GFP_KERNEL);
 	if (!data->res_name)
 		goto err_res_name;
 
+	rc = memory_group_register_static(numa_node, total_len);
+	if (rc < 0)
+		goto err_reg_mgid;
+	data->mgid = rc;
+
 	for (i = 0; i < dev_dax->nr_range; i++) {
 		struct resource *res;
 		struct range range;
 
 		rc = dax_kmem_range(dev_dax, i, &range);
-		if (rc) {
-			dev_info(dev, "mapping%d: %#llx-%#llx too small after alignment\n",
-					i, range.start, range.end);
+		if (rc)
 			continue;
-		}
 
 		/* Region is permanently reserved if hotremove fails. */
 		res = request_mem_region(range.start, range_len(&range), data->res_name);
@@ -108,8 +129,8 @@ static int dev_dax_kmem_probe(struct dev_dax *dev_dax)
 		 * Ensure that future kexec'd kernels will not treat
 		 * this as RAM automatically.
 		 */
-		rc = add_memory_driver_managed(numa_node, range.start,
-				range_len(&range), kmem_name, MHP_NONE);
+		rc = add_memory_driver_managed(data->mgid, range.start,
+				range_len(&range), kmem_name, MHP_NID_IS_MGID);
 
 		if (rc) {
 			dev_warn(dev, "mapping%d: %#llx-%#llx memory add failed\n",
@@ -129,6 +150,8 @@ static int dev_dax_kmem_probe(struct dev_dax *dev_dax)
 	return 0;
 
 err_request_mem:
+	memory_group_unregister(data->mgid);
+err_reg_mgid:
 	kfree(data->res_name);
 err_res_name:
 	kfree(data);
@@ -156,8 +179,7 @@ static void dev_dax_kmem_remove(struct dev_dax *dev_dax)
 		if (rc)
 			continue;
 
-		rc = remove_memory(dev_dax->target_node, range.start,
-				range_len(&range));
+		rc = remove_memory(range.start, range_len(&range));
 		if (rc == 0) {
 			release_resource(data->res[i]);
 			kfree(data->res[i]);
@@ -172,6 +194,7 @@ static void dev_dax_kmem_remove(struct dev_dax *dev_dax)
 	}
 
 	if (success >= dev_dax->nr_range) {
+		memory_group_unregister(data->mgid);
 		kfree(data->res_name);
 		kfree(data);
 		dev_set_drvdata(dev, NULL);
diff --git a/drivers/dax/super.c b/drivers/dax/super.c
index 44736cbd446e..fc89e91beea7 100644
--- a/drivers/dax/super.c
+++ b/drivers/dax/super.c
@@ -17,6 +17,24 @@
 #include <linux/fs.h>
 #include "dax-private.h"
 
+/**
+ * struct dax_device - anchor object for dax services
+ * @inode: core vfs
+ * @cdev: optional character interface for "device dax"
+ * @host: optional name for lookups where the device path is not available
+ * @private: dax driver private data
+ * @flags: state and boolean properties
+ */
+struct dax_device {
+	struct hlist_node list;
+	struct inode inode;
+	struct cdev cdev;
+	const char *host;
+	void *private;
+	unsigned long flags;
+	const struct dax_operations *ops;
+};
+
 static dev_t dax_devt;
 DEFINE_STATIC_SRCU(dax_srcu);
 static struct vfsmount *dax_mnt;
@@ -40,6 +58,42 @@ void dax_read_unlock(int id)
 }
 EXPORT_SYMBOL_GPL(dax_read_unlock);
 
+static int dax_host_hash(const char *host)
+{
+	return hashlen_hash(hashlen_string("DAX", host)) % DAX_HASH_SIZE;
+}
+
+/**
+ * dax_get_by_host() - temporary lookup mechanism for filesystem-dax
+ * @host: alternate name for the device registered by a dax driver
+ */
+static struct dax_device *dax_get_by_host(const char *host)
+{
+	struct dax_device *dax_dev, *found = NULL;
+	int hash, id;
+
+	if (!host)
+		return NULL;
+
+	hash = dax_host_hash(host);
+
+	id = dax_read_lock();
+	spin_lock(&dax_host_lock);
+	hlist_for_each_entry(dax_dev, &dax_host_list[hash], list) {
+		if (!dax_alive(dax_dev)
+				|| strcmp(host, dax_dev->host) != 0)
+			continue;
+
+		if (igrab(&dax_dev->inode))
+			found = dax_dev;
+		break;
+	}
+	spin_unlock(&dax_host_lock);
+	dax_read_unlock(id);
+
+	return found;
+}
+
 #ifdef CONFIG_BLOCK
 #include <linux/blkdev.h>
 
@@ -65,15 +119,13 @@ struct dax_device *fs_dax_get_by_bdev(struct block_device *bdev)
 	return dax_get_by_host(bdev->bd_disk->disk_name);
 }
 EXPORT_SYMBOL_GPL(fs_dax_get_by_bdev);
-#endif
 
-bool __generic_fsdax_supported(struct dax_device *dax_dev,
+bool generic_fsdax_supported(struct dax_device *dax_dev,
 		struct block_device *bdev, int blocksize, sector_t start,
 		sector_t sectors)
 {
 	bool dax_enabled = false;
 	pgoff_t pgoff, pgoff_end;
-	char buf[BDEVNAME_SIZE];
 	void *kaddr, *end_kaddr;
 	pfn_t pfn, end_pfn;
 	sector_t last_page;
@@ -81,29 +133,25 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,
 	int err, id;
 
 	if (blocksize != PAGE_SIZE) {
-		pr_info("%s: error: unsupported blocksize for dax\n",
-				bdevname(bdev, buf));
+		pr_info("%pg: error: unsupported blocksize for dax\n", bdev);
 		return false;
 	}
 
 	if (!dax_dev) {
-		pr_debug("%s: error: dax unsupported by block device\n",
-				bdevname(bdev, buf));
+		pr_debug("%pg: error: dax unsupported by block device\n", bdev);
 		return false;
 	}
 
 	err = bdev_dax_pgoff(bdev, start, PAGE_SIZE, &pgoff);
 	if (err) {
-		pr_info("%s: error: unaligned partition for dax\n",
-				bdevname(bdev, buf));
+		pr_info("%pg: error: unaligned partition for dax\n", bdev);
 		return false;
 	}
 
 	last_page = PFN_DOWN((start + sectors - 1) * 512) * PAGE_SIZE / 512;
 	err = bdev_dax_pgoff(bdev, last_page, PAGE_SIZE, &pgoff_end);
 	if (err) {
-		pr_info("%s: error: unaligned partition for dax\n",
-				bdevname(bdev, buf));
+		pr_info("%pg: error: unaligned partition for dax\n", bdev);
 		return false;
 	}
 
@@ -112,8 +160,8 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,
 	len2 = dax_direct_access(dax_dev, pgoff_end, 1, &end_kaddr, &end_pfn);
 
 	if (len < 1 || len2 < 1) {
-		pr_info("%s: error: dax access failed (%ld)\n",
-				bdevname(bdev, buf), len < 1 ? len : len2);
+		pr_info("%pg: error: dax access failed (%ld)\n",
+				bdev, len < 1 ? len : len2);
 		dax_read_unlock(id);
 		return false;
 	}
@@ -147,57 +195,32 @@ bool __generic_fsdax_supported(struct dax_device *dax_dev,
 	dax_read_unlock(id);
 
 	if (!dax_enabled) {
-		pr_info("%s: error: dax support not enabled\n",
-				bdevname(bdev, buf));
+		pr_info("%pg: error: dax support not enabled\n", bdev);
 		return false;
 	}
 	return true;
 }
-EXPORT_SYMBOL_GPL(__generic_fsdax_supported);
+EXPORT_SYMBOL_GPL(generic_fsdax_supported);
 
-/**
- * __bdev_dax_supported() - Check if the device supports dax for filesystem
- * @bdev: block device to check
- * @blocksize: The block size of the device
- *
- * This is a library function for filesystems to check if the block device
- * can be mounted with dax option.
- *
- * Return: true if supported, false if unsupported
- */
-bool __bdev_dax_supported(struct block_device *bdev, int blocksize)
+bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,
+		int blocksize, sector_t start, sector_t len)
 {
-	struct dax_device *dax_dev;
-	struct request_queue *q;
-	char buf[BDEVNAME_SIZE];
-	bool ret;
+	bool ret = false;
 	int id;
 
-	q = bdev_get_queue(bdev);
-	if (!q || !blk_queue_dax(q)) {
-		pr_debug("%s: error: request queue doesn't support dax\n",
-				bdevname(bdev, buf));
-		return false;
-	}
-
-	dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
-	if (!dax_dev) {
-		pr_debug("%s: error: device does not support dax\n",
-				bdevname(bdev, buf));
+	if (!dax_dev)
 		return false;
-	}
 
 	id = dax_read_lock();
-	ret = dax_supported(dax_dev, bdev, blocksize, 0,
-			i_size_read(bdev->bd_inode) / 512);
+	if (dax_alive(dax_dev) && dax_dev->ops->dax_supported)
+		ret = dax_dev->ops->dax_supported(dax_dev, bdev, blocksize,
+						  start, len);
 	dax_read_unlock(id);
-
-	put_dax(dax_dev);
-
 	return ret;
 }
-EXPORT_SYMBOL_GPL(__bdev_dax_supported);
-#endif
+EXPORT_SYMBOL_GPL(dax_supported);
+#endif /* CONFIG_FS_DAX */
+#endif /* CONFIG_BLOCK */
 
 enum dax_device_flags {
 	/* !alive + rcu grace period == no new operations / mappings */
@@ -208,24 +231,6 @@ enum dax_device_flags {
 	DAXDEV_SYNC,
 };
 
-/**
- * struct dax_device - anchor object for dax services
- * @inode: core vfs
- * @cdev: optional character interface for "device dax"
- * @host: optional name for lookups where the device path is not available
- * @private: dax driver private data
- * @flags: state and boolean properties
- */
-struct dax_device {
-	struct hlist_node list;
-	struct inode inode;
-	struct cdev cdev;
-	const char *host;
-	void *private;
-	unsigned long flags;
-	const struct dax_operations *ops;
-};
-
 static ssize_t write_cache_show(struct device *dev,
 		struct device_attribute *attr, char *buf)
 {
@@ -323,19 +328,6 @@ long dax_direct_access(struct dax_device *dax_dev, pgoff_t pgoff, long nr_pages,
 }
 EXPORT_SYMBOL_GPL(dax_direct_access);
 
-bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,
-		int blocksize, sector_t start, sector_t len)
-{
-	if (!dax_dev)
-		return false;
-
-	if (!dax_alive(dax_dev))
-		return false;
-
-	return dax_dev->ops->dax_supported(dax_dev, bdev, blocksize, start, len);
-}
-EXPORT_SYMBOL_GPL(dax_supported);
-
 size_t dax_copy_from_iter(struct dax_device *dax_dev, pgoff_t pgoff, void *addr,
 		size_t bytes, struct iov_iter *i)
 {
@@ -423,11 +415,6 @@ bool dax_alive(struct dax_device *dax_dev)
 }
 EXPORT_SYMBOL_GPL(dax_alive);
 
-static int dax_host_hash(const char *host)
-{
-	return hashlen_hash(hashlen_string("DAX", host)) % DAX_HASH_SIZE;
-}
-
 /*
  * Note, rcu is not protecting the liveness of dax_dev, rcu is ensuring
  * that any fault handlers or operations that might have seen
@@ -625,38 +612,6 @@ void put_dax(struct dax_device *dax_dev)
 EXPORT_SYMBOL_GPL(put_dax);
 
 /**
- * dax_get_by_host() - temporary lookup mechanism for filesystem-dax
- * @host: alternate name for the device registered by a dax driver
- */
-struct dax_device *dax_get_by_host(const char *host)
-{
-	struct dax_device *dax_dev, *found = NULL;
-	int hash, id;
-
-	if (!host)
-		return NULL;
-
-	hash = dax_host_hash(host);
-
-	id = dax_read_lock();
-	spin_lock(&dax_host_lock);
-	hlist_for_each_entry(dax_dev, &dax_host_list[hash], list) {
-		if (!dax_alive(dax_dev)
-				|| strcmp(host, dax_dev->host) != 0)
-			continue;
-
-		if (igrab(&dax_dev->inode))
-			found = dax_dev;
-		break;
-	}
-	spin_unlock(&dax_host_lock);
-	dax_read_unlock(id);
-
-	return found;
-}
-EXPORT_SYMBOL_GPL(dax_get_by_host);
-
-/**
  * inode_dax: convert a public inode into its dax_dev
  * @inode: An inode with i_cdev pointing to a dax_dev
  *
diff --git a/drivers/devfreq/devfreq.c b/drivers/devfreq/devfreq.c
index 28f3e0ba6cdd..85faa7a5c7d1 100644
--- a/drivers/devfreq/devfreq.c
+++ b/drivers/devfreq/devfreq.c
@@ -27,6 +27,7 @@
 #include <linux/hrtimer.h>
 #include <linux/of.h>
 #include <linux/pm_qos.h>
+#include <linux/units.h>
 #include "governor.h"
 
 #define CREATE_TRACE_POINTS
@@ -34,7 +35,6 @@
 
 #define IS_SUPPORTED_FLAG(f, name) ((f & DEVFREQ_GOV_FLAG_##name) ? true : false)
 #define IS_SUPPORTED_ATTR(f, name) ((f & DEVFREQ_GOV_ATTR_##name) ? true : false)
-#define HZ_PER_KHZ	1000
 
 static struct class *devfreq_class;
 static struct dentry *devfreq_debugfs;
diff --git a/drivers/dma-buf/Kconfig b/drivers/dma-buf/Kconfig
index 9561e3d2d428..541efe01abc7 100644
--- a/drivers/dma-buf/Kconfig
+++ b/drivers/dma-buf/Kconfig
@@ -42,6 +42,7 @@ config UDMABUF
 config DMABUF_MOVE_NOTIFY
 	bool "Move notify between drivers (EXPERIMENTAL)"
 	default n
+	depends on DMA_SHARED_BUFFER
 	help
 	  Don't pin buffers if the dynamic DMA-buf interface is available on
 	  both the exporter as well as the importer. This fixes a security
@@ -52,6 +53,7 @@ config DMABUF_MOVE_NOTIFY
 
 config DMABUF_DEBUG
 	bool "DMA-BUF debug checks"
+	depends on DMA_SHARED_BUFFER
 	default y if DMA_API_DEBUG
 	help
 	  This option enables additional checks for DMA-BUF importers and
@@ -74,7 +76,7 @@ menuconfig DMABUF_HEAPS
 
 menuconfig DMABUF_SYSFS_STATS
 	bool "DMA-BUF sysfs statistics"
-	select DMA_SHARED_BUFFER
+	depends on DMA_SHARED_BUFFER
 	help
 	   Choose this option to enable DMA-BUF sysfs statistics
 	   in location /sys/kernel/dmabuf/buffers.
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 39b5b46e880f..80c2c03cb014 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -277,10 +277,15 @@ config INTEL_IDMA64
 	  Enable DMA support for Intel Low Power Subsystem such as found on
 	  Intel Skylake PCH.
 
+config INTEL_IDXD_BUS
+	tristate
+	default INTEL_IDXD
+
 config INTEL_IDXD
 	tristate "Intel Data Accelerators support"
-	depends on PCI && X86_64
+	depends on PCI && X86_64 && !UML
 	depends on PCI_MSI
+	depends on PCI_PASID
 	depends on SBITMAP
 	select DMA_ENGINE
 	help
@@ -291,6 +296,23 @@ config INTEL_IDXD
 
 	  If unsure, say N.
 
+config INTEL_IDXD_COMPAT
+	bool "Legacy behavior for idxd driver"
+	depends on PCI && X86_64
+	select INTEL_IDXD_BUS
+	help
+	  Compatible driver to support old /sys/bus/dsa/drivers/dsa behavior.
+	  The old behavior performed driver bind/unbind for device and wq
+	  devices all under the dsa driver. The compat driver will emulate
+	  the legacy behavior in order to allow existing support apps (i.e.
+	  accel-config) to continue function. It is expected that accel-config
+	  v3.2 and earlier will need the compat mode. A distro with later
+	  accel-config version can disable this compat config.
+
+	  Say Y if you have old applications that require such behavior.
+
+	  If unsure, say N.
+
 # Config symbol that collects all the dependencies that's necessary to
 # support shared virtual memory for the devices supported by idxd.
 config INTEL_IDXD_SVM
@@ -315,7 +337,7 @@ config INTEL_IDXD_PERFMON
 
 config INTEL_IOATDMA
 	tristate "Intel I/OAT DMA support"
-	depends on PCI && X86_64
+	depends on PCI && X86_64 && !UML
 	select DMA_ENGINE
 	select DMA_ENGINE_RAID
 	select DCA
@@ -716,6 +738,8 @@ source "drivers/dma/bestcomm/Kconfig"
 
 source "drivers/dma/mediatek/Kconfig"
 
+source "drivers/dma/ptdma/Kconfig"
+
 source "drivers/dma/qcom/Kconfig"
 
 source "drivers/dma/dw/Kconfig"
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index aa69094e3547..616d926cf2a5 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -16,6 +16,7 @@ obj-$(CONFIG_DMATEST) += dmatest.o
 obj-$(CONFIG_ALTERA_MSGDMA) += altera-msgdma.o
 obj-$(CONFIG_AMBA_PL08X) += amba-pl08x.o
 obj-$(CONFIG_AMCC_PPC440SPE_ADMA) += ppc4xx/
+obj-$(CONFIG_AMD_PTDMA) += ptdma/
 obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_AT_XDMAC) += at_xdmac.o
 obj-$(CONFIG_AXI_DMAC) += dma-axi-dmac.o
@@ -41,7 +42,7 @@ obj-$(CONFIG_IMX_DMA) += imx-dma.o
 obj-$(CONFIG_IMX_SDMA) += imx-sdma.o
 obj-$(CONFIG_INTEL_IDMA64) += idma64.o
 obj-$(CONFIG_INTEL_IOATDMA) += ioat/
-obj-$(CONFIG_INTEL_IDXD) += idxd/
+obj-y += idxd/
 obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_K3_DMA) += k3dma.o
 obj-$(CONFIG_LPC18XX_DMAMUX) += lpc18xx-dmamux.o
diff --git a/drivers/dma/acpi-dma.c b/drivers/dma/acpi-dma.c
index 235f1396f968..5906eae26e2a 100644
--- a/drivers/dma/acpi-dma.c
+++ b/drivers/dma/acpi-dma.c
@@ -70,10 +70,22 @@ static int acpi_dma_parse_resource_group(const struct acpi_csrt_group *grp,
 
 	si = (const struct acpi_csrt_shared_info *)&grp[1];
 
-	/* Match device by MMIO and IRQ */
+	/* Match device by MMIO */
 	if (si->mmio_base_low != lower_32_bits(mem) ||
-	    si->mmio_base_high != upper_32_bits(mem) ||
-	    si->gsi_interrupt != irq)
+	    si->mmio_base_high != upper_32_bits(mem))
+		return 0;
+
+	/*
+	 * acpi_gsi_to_irq() can't be used because some platforms do not save
+	 * registered IRQs in the MP table. Instead we just try to register
+	 * the GSI, which is the core part of the above mentioned function.
+	 */
+	ret = acpi_register_gsi(NULL, si->gsi_interrupt, si->interrupt_mode, si->interrupt_polarity);
+	if (ret < 0)
+		return 0;
+
+	/* Match device by Linux vIRQ */
+	if (ret != irq)
 		return 0;
 
 	dev_dbg(&adev->dev, "matches with %.4s%04X (rev %u)\n",
diff --git a/drivers/dma/altera-msgdma.c b/drivers/dma/altera-msgdma.c
index 0fe0676f8e1d..5a2c7573b692 100644
--- a/drivers/dma/altera-msgdma.c
+++ b/drivers/dma/altera-msgdma.c
@@ -691,10 +691,14 @@ static void msgdma_tasklet(struct tasklet_struct *t)
 
 	spin_lock_irqsave(&mdev->lock, flags);
 
-	/* Read number of responses that are available */
-	count = ioread32(mdev->csr + MSGDMA_CSR_RESP_FILL_LEVEL);
-	dev_dbg(mdev->dev, "%s (%d): response count=%d\n",
-		__func__, __LINE__, count);
+	if (mdev->resp) {
+		/* Read number of responses that are available */
+		count = ioread32(mdev->csr + MSGDMA_CSR_RESP_FILL_LEVEL);
+		dev_dbg(mdev->dev, "%s (%d): response count=%d\n",
+			__func__, __LINE__, count);
+	} else {
+		count = 1;
+	}
 
 	while (count--) {
 		/*
@@ -703,8 +707,12 @@ static void msgdma_tasklet(struct tasklet_struct *t)
 		 * have any real values, like transferred bytes or error
 		 * bits. So we need to just drop these values.
 		 */
-		size = ioread32(mdev->resp + MSGDMA_RESP_BYTES_TRANSFERRED);
-		status = ioread32(mdev->resp + MSGDMA_RESP_STATUS);
+		if (mdev->resp) {
+			size = ioread32(mdev->resp +
+					MSGDMA_RESP_BYTES_TRANSFERRED);
+			status = ioread32(mdev->resp +
+					MSGDMA_RESP_STATUS);
+		}
 
 		msgdma_complete_descriptor(mdev);
 		msgdma_chan_desc_cleanup(mdev);
@@ -757,14 +765,21 @@ static void msgdma_dev_remove(struct msgdma_device *mdev)
 }
 
 static int request_and_map(struct platform_device *pdev, const char *name,
-			   struct resource **res, void __iomem **ptr)
+			   struct resource **res, void __iomem **ptr,
+			   bool optional)
 {
 	struct resource *region;
 	struct device *device = &pdev->dev;
 
 	*res = platform_get_resource_byname(pdev, IORESOURCE_MEM, name);
 	if (*res == NULL) {
-		dev_err(device, "resource %s not defined\n", name);
+		if (optional) {
+			*ptr = NULL;
+			dev_info(device, "optional resource %s not defined\n",
+				 name);
+			return 0;
+		}
+		dev_err(device, "mandatory resource %s not defined\n", name);
 		return -ENODEV;
 	}
 
@@ -805,17 +820,17 @@ static int msgdma_probe(struct platform_device *pdev)
 	mdev->dev = &pdev->dev;
 
 	/* Map CSR space */
-	ret = request_and_map(pdev, "csr", &dma_res, &mdev->csr);
+	ret = request_and_map(pdev, "csr", &dma_res, &mdev->csr, false);
 	if (ret)
 		return ret;
 
 	/* Map (extended) descriptor space */
-	ret = request_and_map(pdev, "desc", &dma_res, &mdev->desc);
+	ret = request_and_map(pdev, "desc", &dma_res, &mdev->desc, false);
 	if (ret)
 		return ret;
 
 	/* Map response space */
-	ret = request_and_map(pdev, "resp", &dma_res, &mdev->resp);
+	ret = request_and_map(pdev, "resp", &dma_res, &mdev->resp, true);
 	if (ret)
 		return ret;
 
diff --git a/drivers/dma/at_xdmac.c b/drivers/dma/at_xdmac.c
index 64a52bf4d737..ab78e0f6afd7 100644
--- a/drivers/dma/at_xdmac.c
+++ b/drivers/dma/at_xdmac.c
@@ -2240,10 +2240,16 @@ static struct platform_driver at_xdmac_driver = {
 
 static int __init at_xdmac_init(void)
 {
-	return platform_driver_probe(&at_xdmac_driver, at_xdmac_probe);
+	return platform_driver_register(&at_xdmac_driver);
 }
 subsys_initcall(at_xdmac_init);
 
+static void __exit at_xdmac_exit(void)
+{
+	platform_driver_unregister(&at_xdmac_driver);
+}
+module_exit(at_xdmac_exit);
+
 MODULE_DESCRIPTION("Atmel Extended DMA Controller driver");
 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
index d9e4ac3edb4e..35993ab92154 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c
@@ -363,12 +363,16 @@ static void axi_chan_block_xfer_start(struct axi_dma_chan *chan,
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DST :
 			DWAXIDMAC_TT_FC_MEM_TO_PER_DMAC)
 			<< CH_CFG_H_TT_FC_POS;
+		if (chan->chip->apb_regs)
+			reg |= (chan->id << CH_CFG_H_DST_PER_POS);
 		break;
 	case DMA_DEV_TO_MEM:
 		reg |= (chan->config.device_fc ?
 			DWAXIDMAC_TT_FC_PER_TO_MEM_SRC :
 			DWAXIDMAC_TT_FC_PER_TO_MEM_DMAC)
 			<< CH_CFG_H_TT_FC_POS;
+		if (chan->chip->apb_regs)
+			reg |= (chan->id << CH_CFG_H_SRC_PER_POS);
 		break;
 	default:
 		break;
@@ -470,18 +474,13 @@ static void dma_chan_free_chan_resources(struct dma_chan *dchan)
 	pm_runtime_put(chan->chip->dev);
 }
 
-static void dw_axi_dma_set_hw_channel(struct axi_dma_chip *chip,
-				      u32 handshake_num, bool set)
+static void dw_axi_dma_set_hw_channel(struct axi_dma_chan *chan, bool set)
 {
-	unsigned long start = 0;
-	unsigned long reg_value;
-	unsigned long reg_mask;
-	unsigned long reg_set;
-	unsigned long mask;
-	unsigned long val;
+	struct axi_dma_chip *chip = chan->chip;
+	unsigned long reg_value, val;
 
 	if (!chip->apb_regs) {
-		dev_dbg(chip->dev, "apb_regs not initialized\n");
+		dev_err(chip->dev, "apb_regs not initialized\n");
 		return;
 	}
 
@@ -490,26 +489,22 @@ static void dw_axi_dma_set_hw_channel(struct axi_dma_chip *chip,
 	 * Lock the DMA channel by assign a handshake number to the channel.
 	 * Unlock the DMA channel by assign 0x3F to the channel.
 	 */
-	if (set) {
-		reg_set = UNUSED_CHANNEL;
-		val = handshake_num;
-	} else {
-		reg_set = handshake_num;
+	if (set)
+		val = chan->hw_handshake_num;
+	else
 		val = UNUSED_CHANNEL;
-	}
 
 	reg_value = lo_hi_readq(chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
 
-	for_each_set_clump8(start, reg_mask, &reg_value, 64) {
-		if (reg_mask == reg_set) {
-			mask = GENMASK_ULL(start + 7, start);
-			reg_value &= ~mask;
-			reg_value |= rol64(val, start);
-			lo_hi_writeq(reg_value,
-				     chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
-			break;
-		}
-	}
+	/* Channel is already allocated, set handshake as per channel ID */
+	/* 64 bit write should handle for 8 channels */
+
+	reg_value &= ~(DMA_APB_HS_SEL_MASK <<
+			(chan->id * DMA_APB_HS_SEL_BIT_SIZE));
+	reg_value |= (val << (chan->id * DMA_APB_HS_SEL_BIT_SIZE));
+	lo_hi_writeq(reg_value, chip->apb_regs + DMAC_APB_HW_HS_SEL_0);
+
+	return;
 }
 
 /*
@@ -742,7 +737,7 @@ dw_axi_dma_chan_prep_cyclic(struct dma_chan *dchan, dma_addr_t dma_addr,
 		llp = hw_desc->llp;
 	} while (total_segments);
 
-	dw_axi_dma_set_hw_channel(chan->chip, chan->hw_handshake_num, true);
+	dw_axi_dma_set_hw_channel(chan, true);
 
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
@@ -822,7 +817,7 @@ dw_axi_dma_chan_prep_slave_sg(struct dma_chan *dchan, struct scatterlist *sgl,
 		llp = hw_desc->llp;
 	} while (num_sgs);
 
-	dw_axi_dma_set_hw_channel(chan->chip, chan->hw_handshake_num, true);
+	dw_axi_dma_set_hw_channel(chan, true);
 
 	return vchan_tx_prep(&chan->vc, &desc->vd, flags);
 
@@ -1098,8 +1093,7 @@ static int dma_chan_terminate_all(struct dma_chan *dchan)
 			 "%s failed to stop\n", axi_chan_name(chan));
 
 	if (chan->direction != DMA_MEM_TO_MEM)
-		dw_axi_dma_set_hw_channel(chan->chip,
-					  chan->hw_handshake_num, false);
+		dw_axi_dma_set_hw_channel(chan, false);
 	if (chan->direction == DMA_MEM_TO_DEV)
 		dw_axi_dma_set_byte_halfword(chan, false);
 
@@ -1296,7 +1290,7 @@ static int parse_device_properties(struct axi_dma_chip *chip)
 			return -EINVAL;
 
 		chip->dw->hdata->restrict_axi_burst_len = true;
-		chip->dw->hdata->axi_rw_burst_len = tmp - 1;
+		chip->dw->hdata->axi_rw_burst_len = tmp;
 	}
 
 	return 0;
@@ -1365,7 +1359,6 @@ static int dw_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-
 	INIT_LIST_HEAD(&dw->dma.channels);
 	for (i = 0; i < hdata->nr_channels; i++) {
 		struct axi_dma_chan *chan = &dw->chan[i];
@@ -1386,6 +1379,7 @@ static int dw_probe(struct platform_device *pdev)
 
 	/* DMA capabilities */
 	dw->dma.chancnt = hdata->nr_channels;
+	dw->dma.max_burst = hdata->axi_rw_burst_len;
 	dw->dma.src_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.dst_addr_widths = AXI_DMA_BUSWIDTHS;
 	dw->dma.directions = BIT(DMA_MEM_TO_MEM);
diff --git a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
index b69897887c76..380005afde16 100644
--- a/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
+++ b/drivers/dma/dw-axi-dmac/dw-axi-dmac.h
@@ -184,6 +184,8 @@ static inline struct axi_dma_chan *dchan_to_axi_dma_chan(struct dma_chan *dchan)
 #define DMAC_APB_HALFWORD_WR_CH_EN	0x020 /* DMAC Halfword write enables */
 
 #define UNUSED_CHANNEL		0x3F /* Set unused DMA channel to 0x3F */
+#define DMA_APB_HS_SEL_BIT_SIZE	0x08 /* HW handshake bits per channel */
+#define DMA_APB_HS_SEL_MASK	0xFF /* HW handshake select masks */
 #define MAX_BLOCK_SIZE		0x1000 /* 1024 blocks * 4 bytes data width */
 
 /* DMAC_CFG */
@@ -256,6 +258,8 @@ enum {
 
 /* CH_CFG_H */
 #define CH_CFG_H_PRIORITY_POS		17
+#define CH_CFG_H_DST_PER_POS		12
+#define CH_CFG_H_SRC_PER_POS		7
 #define CH_CFG_H_HS_SEL_DST_POS		4
 #define CH_CFG_H_HS_SEL_SRC_POS		3
 enum {
diff --git a/drivers/dma/dw/idma32.c b/drivers/dma/dw/idma32.c
index 3ce44de25d33..58f4078d83fe 100644
--- a/drivers/dma/dw/idma32.c
+++ b/drivers/dma/dw/idma32.c
@@ -1,15 +1,144 @@
 // SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2013,2018 Intel Corporation
+// Copyright (C) 2013,2018,2020-2021 Intel Corporation
 
 #include <linux/bitops.h>
 #include <linux/dmaengine.h>
 #include <linux/errno.h>
+#include <linux/io.h>
+#include <linux/pci.h>
 #include <linux/slab.h>
 #include <linux/types.h>
 
 #include "internal.h"
 
-static void idma32_initialize_chan(struct dw_dma_chan *dwc)
+#define DMA_CTL_CH(x)			(0x1000 + (x) * 4)
+#define DMA_SRC_ADDR_FILLIN(x)		(0x1100 + (x) * 4)
+#define DMA_DST_ADDR_FILLIN(x)		(0x1200 + (x) * 4)
+#define DMA_XBAR_SEL(x)			(0x1300 + (x) * 4)
+#define DMA_REGACCESS_CHID_CFG		(0x1400)
+
+#define CTL_CH_TRANSFER_MODE_MASK	GENMASK(1, 0)
+#define CTL_CH_TRANSFER_MODE_S2S	0
+#define CTL_CH_TRANSFER_MODE_S2D	1
+#define CTL_CH_TRANSFER_MODE_D2S	2
+#define CTL_CH_TRANSFER_MODE_D2D	3
+#define CTL_CH_RD_RS_MASK		GENMASK(4, 3)
+#define CTL_CH_WR_RS_MASK		GENMASK(6, 5)
+#define CTL_CH_RD_NON_SNOOP_BIT		BIT(8)
+#define CTL_CH_WR_NON_SNOOP_BIT		BIT(9)
+
+#define XBAR_SEL_DEVID_MASK		GENMASK(15, 0)
+#define XBAR_SEL_RX_TX_BIT		BIT(16)
+#define XBAR_SEL_RX_TX_SHIFT		16
+
+#define REGACCESS_CHID_MASK		GENMASK(2, 0)
+
+static unsigned int idma32_get_slave_devfn(struct dw_dma_chan *dwc)
+{
+	struct device *slave = dwc->chan.slave;
+
+	if (!slave || !dev_is_pci(slave))
+		return 0;
+
+	return to_pci_dev(slave)->devfn;
+}
+
+static void idma32_initialize_chan_xbar(struct dw_dma_chan *dwc)
+{
+	struct dw_dma *dw = to_dw_dma(dwc->chan.device);
+	void __iomem *misc = __dw_regs(dw);
+	u32 cfghi = 0, cfglo = 0;
+	u8 dst_id, src_id;
+	u32 value;
+
+	/* DMA Channel ID Configuration register must be programmed first */
+	value = readl(misc + DMA_REGACCESS_CHID_CFG);
+
+	value &= ~REGACCESS_CHID_MASK;
+	value |= dwc->chan.chan_id;
+
+	writel(value, misc + DMA_REGACCESS_CHID_CFG);
+
+	/* Configure channel attributes */
+	value = readl(misc + DMA_CTL_CH(dwc->chan.chan_id));
+
+	value &= ~(CTL_CH_RD_NON_SNOOP_BIT | CTL_CH_WR_NON_SNOOP_BIT);
+	value &= ~(CTL_CH_RD_RS_MASK | CTL_CH_WR_RS_MASK);
+	value &= ~CTL_CH_TRANSFER_MODE_MASK;
+
+	switch (dwc->direction) {
+	case DMA_MEM_TO_DEV:
+		value |= CTL_CH_TRANSFER_MODE_D2S;
+		value |= CTL_CH_WR_NON_SNOOP_BIT;
+		break;
+	case DMA_DEV_TO_MEM:
+		value |= CTL_CH_TRANSFER_MODE_S2D;
+		value |= CTL_CH_RD_NON_SNOOP_BIT;
+		break;
+	default:
+		/*
+		 * Memory-to-Memory and Device-to-Device are ignored for now.
+		 *
+		 * For Memory-to-Memory transfers we would need to set mode
+		 * and disable snooping on both sides.
+		 */
+		return;
+	}
+
+	writel(value, misc + DMA_CTL_CH(dwc->chan.chan_id));
+
+	/* Configure crossbar selection */
+	value = readl(misc + DMA_XBAR_SEL(dwc->chan.chan_id));
+
+	/* DEVFN selection */
+	value &= ~XBAR_SEL_DEVID_MASK;
+	value |= idma32_get_slave_devfn(dwc);
+
+	switch (dwc->direction) {
+	case DMA_MEM_TO_DEV:
+		value |= XBAR_SEL_RX_TX_BIT;
+		break;
+	case DMA_DEV_TO_MEM:
+		value &= ~XBAR_SEL_RX_TX_BIT;
+		break;
+	default:
+		/* Memory-to-Memory and Device-to-Device are ignored for now */
+		return;
+	}
+
+	writel(value, misc + DMA_XBAR_SEL(dwc->chan.chan_id));
+
+	/* Configure DMA channel low and high registers */
+	switch (dwc->direction) {
+	case DMA_MEM_TO_DEV:
+		dst_id = dwc->chan.chan_id;
+		src_id = dwc->dws.src_id;
+		break;
+	case DMA_DEV_TO_MEM:
+		dst_id = dwc->dws.dst_id;
+		src_id = dwc->chan.chan_id;
+		break;
+	default:
+		/* Memory-to-Memory and Device-to-Device are ignored for now */
+		return;
+	}
+
+	/* Set default burst alignment */
+	cfglo |= IDMA32C_CFGL_DST_BURST_ALIGN | IDMA32C_CFGL_SRC_BURST_ALIGN;
+
+	/* Low 4 bits of the request lines */
+	cfghi |= IDMA32C_CFGH_DST_PER(dst_id & 0xf);
+	cfghi |= IDMA32C_CFGH_SRC_PER(src_id & 0xf);
+
+	/* Request line extension (2 bits) */
+	cfghi |= IDMA32C_CFGH_DST_PER_EXT(dst_id >> 4 & 0x3);
+	cfghi |= IDMA32C_CFGH_SRC_PER_EXT(src_id >> 4 & 0x3);
+
+	channel_writel(dwc, CFG_LO, cfglo);
+	channel_writel(dwc, CFG_HI, cfghi);
+}
+
+static void idma32_initialize_chan_generic(struct dw_dma_chan *dwc)
 {
 	u32 cfghi = 0;
 	u32 cfglo = 0;
@@ -134,7 +263,10 @@ int idma32_dma_probe(struct dw_dma_chip *chip)
 		return -ENOMEM;
 
 	/* Channel operations */
-	dw->initialize_chan = idma32_initialize_chan;
+	if (chip->pdata->quirks & DW_DMA_QUIRK_XBAR_PRESENT)
+		dw->initialize_chan = idma32_initialize_chan_xbar;
+	else
+		dw->initialize_chan = idma32_initialize_chan_generic;
 	dw->suspend_chan = idma32_suspend_chan;
 	dw->resume_chan = idma32_resume_chan;
 	dw->prepare_ctllo = idma32_prepare_ctllo;
diff --git a/drivers/dma/dw/internal.h b/drivers/dma/dw/internal.h
index 2e1c52eefdeb..563ce73488db 100644
--- a/drivers/dma/dw/internal.h
+++ b/drivers/dma/dw/internal.h
@@ -74,4 +74,20 @@ static __maybe_unused const struct dw_dma_chip_pdata idma32_chip_pdata = {
 	.remove = idma32_dma_remove,
 };
 
+static const struct dw_dma_platform_data xbar_pdata = {
+	.nr_channels = 8,
+	.chan_allocation_order = CHAN_ALLOCATION_ASCENDING,
+	.chan_priority = CHAN_PRIORITY_ASCENDING,
+	.block_size = 131071,
+	.nr_masters = 1,
+	.data_width = {4},
+	.quirks = DW_DMA_QUIRK_XBAR_PRESENT,
+};
+
+static __maybe_unused const struct dw_dma_chip_pdata xbar_chip_pdata = {
+	.pdata = &xbar_pdata,
+	.probe = idma32_dma_probe,
+	.remove = idma32_dma_remove,
+};
+
 #endif /* _DMA_DW_INTERNAL_H */
diff --git a/drivers/dma/dw/of.c b/drivers/dma/dw/of.c
index c1cf7675b9d1..523ca806837c 100644
--- a/drivers/dma/dw/of.c
+++ b/drivers/dma/dw/of.c
@@ -50,15 +50,10 @@ struct dw_dma_platform_data *dw_dma_parse_dt(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
 	struct dw_dma_platform_data *pdata;
-	u32 tmp, arr[DW_DMA_MAX_NR_MASTERS], mb[DW_DMA_MAX_NR_CHANNELS];
+	u32 tmp, arr[DW_DMA_MAX_NR_MASTERS];
 	u32 nr_masters;
 	u32 nr_channels;
 
-	if (!np) {
-		dev_err(&pdev->dev, "Missing DT data\n");
-		return NULL;
-	}
-
 	if (of_property_read_u32(np, "dma-masters", &nr_masters))
 		return NULL;
 	if (nr_masters < 1 || nr_masters > DW_DMA_MAX_NR_MASTERS)
@@ -76,41 +71,29 @@ struct dw_dma_platform_data *dw_dma_parse_dt(struct platform_device *pdev)
 	pdata->nr_masters = nr_masters;
 	pdata->nr_channels = nr_channels;
 
-	if (!of_property_read_u32(np, "chan_allocation_order", &tmp))
-		pdata->chan_allocation_order = (unsigned char)tmp;
+	of_property_read_u32(np, "chan_allocation_order", &pdata->chan_allocation_order);
+	of_property_read_u32(np, "chan_priority", &pdata->chan_priority);
 
-	if (!of_property_read_u32(np, "chan_priority", &tmp))
-		pdata->chan_priority = tmp;
+	of_property_read_u32(np, "block_size", &pdata->block_size);
 
-	if (!of_property_read_u32(np, "block_size", &tmp))
-		pdata->block_size = tmp;
-
-	if (!of_property_read_u32_array(np, "data-width", arr, nr_masters)) {
-		for (tmp = 0; tmp < nr_masters; tmp++)
-			pdata->data_width[tmp] = arr[tmp];
-	} else if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) {
+	/* Try deprecated property first */
+	if (!of_property_read_u32_array(np, "data_width", arr, nr_masters)) {
 		for (tmp = 0; tmp < nr_masters; tmp++)
 			pdata->data_width[tmp] = BIT(arr[tmp] & 0x07);
 	}
 
-	if (!of_property_read_u32_array(np, "multi-block", mb, nr_channels)) {
-		for (tmp = 0; tmp < nr_channels; tmp++)
-			pdata->multi_block[tmp] = mb[tmp];
-	} else {
-		for (tmp = 0; tmp < nr_channels; tmp++)
-			pdata->multi_block[tmp] = 1;
-	}
+	/* If "data_width" and "data-width" both provided use the latter one */
+	of_property_read_u32_array(np, "data-width", pdata->data_width, nr_masters);
 
-	if (of_property_read_u32_array(np, "snps,max-burst-len", pdata->max_burst,
-				       nr_channels)) {
-		memset32(pdata->max_burst, DW_DMA_MAX_BURST, nr_channels);
-	}
+	memset32(pdata->multi_block, 1, nr_channels);
+	of_property_read_u32_array(np, "multi-block", pdata->multi_block, nr_channels);
 
-	if (!of_property_read_u32(np, "snps,dma-protection-control", &tmp)) {
-		if (tmp > CHAN_PROTCTL_MASK)
-			return NULL;
-		pdata->protctl = tmp;
-	}
+	memset32(pdata->max_burst, DW_DMA_MAX_BURST, nr_channels);
+	of_property_read_u32_array(np, "snps,max-burst-len", pdata->max_burst, nr_channels);
+
+	of_property_read_u32(np, "snps,dma-protection-control", &pdata->protctl);
+	if (pdata->protctl > CHAN_PROTCTL_MASK)
+		return NULL;
 
 	return pdata;
 }
diff --git a/drivers/dma/dw/pci.c b/drivers/dma/dw/pci.c
index 1142aa6f8c4a..26a3f926da02 100644
--- a/drivers/dma/dw/pci.c
+++ b/drivers/dma/dw/pci.c
@@ -120,9 +120,9 @@ static const struct pci_device_id dw_pci_id_table[] = {
 	{ PCI_VDEVICE(INTEL, 0x22c0), (kernel_ulong_t)&dw_dma_chip_pdata },
 
 	/* Elkhart Lake iDMA 32-bit (PSE DMA) */
-	{ PCI_VDEVICE(INTEL, 0x4bb4), (kernel_ulong_t)&idma32_chip_pdata },
-	{ PCI_VDEVICE(INTEL, 0x4bb5), (kernel_ulong_t)&idma32_chip_pdata },
-	{ PCI_VDEVICE(INTEL, 0x4bb6), (kernel_ulong_t)&idma32_chip_pdata },
+	{ PCI_VDEVICE(INTEL, 0x4bb4), (kernel_ulong_t)&xbar_chip_pdata },
+	{ PCI_VDEVICE(INTEL, 0x4bb5), (kernel_ulong_t)&xbar_chip_pdata },
+	{ PCI_VDEVICE(INTEL, 0x4bb6), (kernel_ulong_t)&xbar_chip_pdata },
 
 	/* Haswell */
 	{ PCI_VDEVICE(INTEL, 0x9c60), (kernel_ulong_t)&dw_dma_chip_pdata },
diff --git a/drivers/dma/dw/platform.c b/drivers/dma/dw/platform.c
index 0585d749d935..246118955877 100644
--- a/drivers/dma/dw/platform.c
+++ b/drivers/dma/dw/platform.c
@@ -149,9 +149,9 @@ static const struct acpi_device_id dw_dma_acpi_id_table[] = {
 	{ "808622C0", (kernel_ulong_t)&dw_dma_chip_pdata },
 
 	/* Elkhart Lake iDMA 32-bit (PSE DMA) */
-	{ "80864BB4", (kernel_ulong_t)&idma32_chip_pdata },
-	{ "80864BB5", (kernel_ulong_t)&idma32_chip_pdata },
-	{ "80864BB6", (kernel_ulong_t)&idma32_chip_pdata },
+	{ "80864BB4", (kernel_ulong_t)&xbar_chip_pdata },
+	{ "80864BB5", (kernel_ulong_t)&xbar_chip_pdata },
+	{ "80864BB6", (kernel_ulong_t)&xbar_chip_pdata },
 
 	{ }
 };
diff --git a/drivers/dma/ep93xx_dma.c b/drivers/dma/ep93xx_dma.c
index 01027779beb8..98f9ee70362e 100644
--- a/drivers/dma/ep93xx_dma.c
+++ b/drivers/dma/ep93xx_dma.c
@@ -897,7 +897,7 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan)
 	if (data && data->name)
 		name = data->name;
 
-	ret = clk_enable(edmac->clk);
+	ret = clk_prepare_enable(edmac->clk);
 	if (ret)
 		return ret;
 
@@ -936,7 +936,7 @@ static int ep93xx_dma_alloc_chan_resources(struct dma_chan *chan)
 fail_free_irq:
 	free_irq(edmac->irq, edmac);
 fail_clk_disable:
-	clk_disable(edmac->clk);
+	clk_disable_unprepare(edmac->clk);
 
 	return ret;
 }
@@ -969,7 +969,7 @@ static void ep93xx_dma_free_chan_resources(struct dma_chan *chan)
 	list_for_each_entry_safe(desc, d, &list, node)
 		kfree(desc);
 
-	clk_disable(edmac->clk);
+	clk_disable_unprepare(edmac->clk);
 	free_irq(edmac->irq, edmac);
 }
 
diff --git a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
index 4ae057922ef1..8dd40d00a672 100644
--- a/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
+++ b/drivers/dma/fsl-dpaa2-qdma/dpaa2-qdma.c
@@ -291,9 +291,8 @@ static void dpaa2_qdma_issue_pending(struct dma_chan *chan)
 
 		err = dpaa2_io_service_enqueue_fq(NULL, dpaa2_chan->fqid, fd);
 		if (err) {
-			list_del(&dpaa2_comp->list);
-			list_add_tail(&dpaa2_comp->list,
-				      &dpaa2_chan->comp_free);
+			list_move_tail(&dpaa2_comp->list,
+				       &dpaa2_chan->comp_free);
 		}
 	}
 err_enqueue:
@@ -626,8 +625,7 @@ static void dpaa2_qdma_free_desc(struct virt_dma_desc *vdesc)
 	dpaa2_comp = to_fsl_qdma_comp(vdesc);
 	qchan = dpaa2_comp->qchan;
 	spin_lock_irqsave(&qchan->queue_lock, flags);
-	list_del(&dpaa2_comp->list);
-	list_add_tail(&dpaa2_comp->list, &qchan->comp_free);
+	list_move_tail(&dpaa2_comp->list, &qchan->comp_free);
 	spin_unlock_irqrestore(&qchan->queue_lock, flags);
 }
 
@@ -703,7 +701,7 @@ static int dpaa2_qdma_probe(struct fsl_mc_device *dpdmai_dev)
 	/* DPDMAI enable */
 	err = dpdmai_enable(priv->mc_io, 0, dpdmai_dev->mc_handle);
 	if (err) {
-		dev_err(dev, "dpdmai_enable() faile\n");
+		dev_err(dev, "dpdmai_enable() failed\n");
 		goto err_enable;
 	}
 
diff --git a/drivers/dma/hisi_dma.c b/drivers/dma/hisi_dma.c
index a259ee010e9b..c855a0e4f9ff 100644
--- a/drivers/dma/hisi_dma.c
+++ b/drivers/dma/hisi_dma.c
@@ -133,11 +133,6 @@ static inline void hisi_dma_update_bit(void __iomem *addr, u32 pos, bool val)
 	writel_relaxed(tmp, addr);
 }
 
-static void hisi_dma_free_irq_vectors(void *data)
-{
-	pci_free_irq_vectors(data);
-}
-
 static void hisi_dma_pause_dma(struct hisi_dma_dev *hdma_dev, u32 index,
 			       bool pause)
 {
@@ -544,6 +539,7 @@ static int hisi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	pci_set_drvdata(pdev, hdma_dev);
 	pci_set_master(pdev);
 
+	/* This will be freed by 'pcim_release()'. See 'pcim_enable_device()' */
 	ret = pci_alloc_irq_vectors(pdev, HISI_DMA_MSI_NUM, HISI_DMA_MSI_NUM,
 				    PCI_IRQ_MSI);
 	if (ret < 0) {
@@ -551,10 +547,6 @@ static int hisi_dma_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return ret;
 	}
 
-	ret = devm_add_action_or_reset(dev, hisi_dma_free_irq_vectors, pdev);
-	if (ret)
-		return ret;
-
 	dma_dev = &hdma_dev->dma_dev;
 	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
 	dma_dev->device_free_chan_resources = hisi_dma_free_chan_resources;
diff --git a/drivers/dma/idxd/Makefile b/drivers/dma/idxd/Makefile
index 6d11558756f8..a1e9f2b3a37c 100644
--- a/drivers/dma/idxd/Makefile
+++ b/drivers/dma/idxd/Makefile
@@ -1,4 +1,12 @@
+ccflags-y += -DDEFAULT_SYMBOL_NAMESPACE=IDXD
+
 obj-$(CONFIG_INTEL_IDXD) += idxd.o
 idxd-y := init.o irq.o device.o sysfs.o submit.o dma.o cdev.o
 
 idxd-$(CONFIG_INTEL_IDXD_PERFMON) += perfmon.o
+
+obj-$(CONFIG_INTEL_IDXD_BUS) += idxd_bus.o
+idxd_bus-y := bus.o
+
+obj-$(CONFIG_INTEL_IDXD_COMPAT) += idxd_compat.o
+idxd_compat-y := compat.o
diff --git a/drivers/dma/idxd/bus.c b/drivers/dma/idxd/bus.c
new file mode 100644
index 000000000000..6f84621053c6
--- /dev/null
+++ b/drivers/dma/idxd/bus.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2021 Intel Corporation. All rights rsvd. */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include "idxd.h"
+
+
+int __idxd_driver_register(struct idxd_device_driver *idxd_drv, struct module *owner,
+			   const char *mod_name)
+{
+	struct device_driver *drv = &idxd_drv->drv;
+
+	if (!idxd_drv->type) {
+		pr_debug("driver type not set (%ps)\n", __builtin_return_address(0));
+		return -EINVAL;
+	}
+
+	drv->name = idxd_drv->name;
+	drv->bus = &dsa_bus_type;
+	drv->owner = owner;
+	drv->mod_name = mod_name;
+
+	return driver_register(drv);
+}
+EXPORT_SYMBOL_GPL(__idxd_driver_register);
+
+void idxd_driver_unregister(struct idxd_device_driver *idxd_drv)
+{
+	driver_unregister(&idxd_drv->drv);
+}
+EXPORT_SYMBOL_GPL(idxd_driver_unregister);
+
+static int idxd_config_bus_match(struct device *dev,
+				 struct device_driver *drv)
+{
+	struct idxd_device_driver *idxd_drv =
+		container_of(drv, struct idxd_device_driver, drv);
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+	int i = 0;
+
+	while (idxd_drv->type[i] != IDXD_DEV_NONE) {
+		if (idxd_dev->type == idxd_drv->type[i])
+			return 1;
+		i++;
+	}
+
+	return 0;
+}
+
+static int idxd_config_bus_probe(struct device *dev)
+{
+	struct idxd_device_driver *idxd_drv =
+		container_of(dev->driver, struct idxd_device_driver, drv);
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return idxd_drv->probe(idxd_dev);
+}
+
+static void idxd_config_bus_remove(struct device *dev)
+{
+	struct idxd_device_driver *idxd_drv =
+		container_of(dev->driver, struct idxd_device_driver, drv);
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	idxd_drv->remove(idxd_dev);
+}
+
+struct bus_type dsa_bus_type = {
+	.name = "dsa",
+	.match = idxd_config_bus_match,
+	.probe = idxd_config_bus_probe,
+	.remove = idxd_config_bus_remove,
+};
+EXPORT_SYMBOL_GPL(dsa_bus_type);
+
+static int __init dsa_bus_init(void)
+{
+	return bus_register(&dsa_bus_type);
+}
+module_init(dsa_bus_init);
+
+static void __exit dsa_bus_exit(void)
+{
+	bus_unregister(&dsa_bus_type);
+}
+module_exit(dsa_bus_exit);
+
+MODULE_DESCRIPTION("IDXD driver dsa_bus_type driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/idxd/cdev.c b/drivers/dma/idxd/cdev.c
index e9def577c697..b9b2b4a4124e 100644
--- a/drivers/dma/idxd/cdev.c
+++ b/drivers/dma/idxd/cdev.c
@@ -41,7 +41,7 @@ struct idxd_user_context {
 
 static void idxd_cdev_dev_release(struct device *dev)
 {
-	struct idxd_cdev *idxd_cdev = container_of(dev, struct idxd_cdev, dev);
+	struct idxd_cdev *idxd_cdev = dev_to_cdev(dev);
 	struct idxd_cdev_context *cdev_ctx;
 	struct idxd_wq *wq = idxd_cdev->wq;
 
@@ -218,14 +218,13 @@ static __poll_t idxd_cdev_poll(struct file *filp,
 	struct idxd_user_context *ctx = filp->private_data;
 	struct idxd_wq *wq = ctx->wq;
 	struct idxd_device *idxd = wq->idxd;
-	unsigned long flags;
 	__poll_t out = 0;
 
 	poll_wait(filp, &wq->err_queue, wait);
-	spin_lock_irqsave(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
 	if (idxd->sw_err.valid)
 		out = EPOLLIN | EPOLLRDNORM;
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_unlock(&idxd->dev_lock);
 
 	return out;
 }
@@ -256,9 +255,10 @@ int idxd_wq_add_cdev(struct idxd_wq *wq)
 	if (!idxd_cdev)
 		return -ENOMEM;
 
+	idxd_cdev->idxd_dev.type = IDXD_DEV_CDEV;
 	idxd_cdev->wq = wq;
 	cdev = &idxd_cdev->cdev;
-	dev = &idxd_cdev->dev;
+	dev = cdev_dev(idxd_cdev);
 	cdev_ctx = &ictx[wq->idxd->data->type];
 	minor = ida_simple_get(&cdev_ctx->minor_ida, 0, MINORMASK, GFP_KERNEL);
 	if (minor < 0) {
@@ -268,7 +268,7 @@ int idxd_wq_add_cdev(struct idxd_wq *wq)
 	idxd_cdev->minor = minor;
 
 	device_initialize(dev);
-	dev->parent = &wq->conf_dev;
+	dev->parent = wq_confdev(wq);
 	dev->bus = &dsa_bus_type;
 	dev->type = &idxd_cdev_device_type;
 	dev->devt = MKDEV(MAJOR(cdev_ctx->devt), minor);
@@ -299,10 +299,67 @@ void idxd_wq_del_cdev(struct idxd_wq *wq)
 
 	idxd_cdev = wq->idxd_cdev;
 	wq->idxd_cdev = NULL;
-	cdev_device_del(&idxd_cdev->cdev, &idxd_cdev->dev);
-	put_device(&idxd_cdev->dev);
+	cdev_device_del(&idxd_cdev->cdev, cdev_dev(idxd_cdev));
+	put_device(cdev_dev(idxd_cdev));
 }
 
+static int idxd_user_drv_probe(struct idxd_dev *idxd_dev)
+{
+	struct idxd_wq *wq = idxd_dev_to_wq(idxd_dev);
+	struct idxd_device *idxd = wq->idxd;
+	int rc;
+
+	if (idxd->state != IDXD_DEV_ENABLED)
+		return -ENXIO;
+
+	mutex_lock(&wq->wq_lock);
+	wq->type = IDXD_WQT_USER;
+	rc = __drv_enable_wq(wq);
+	if (rc < 0)
+		goto err;
+
+	rc = idxd_wq_add_cdev(wq);
+	if (rc < 0) {
+		idxd->cmd_status = IDXD_SCMD_CDEV_ERR;
+		goto err_cdev;
+	}
+
+	idxd->cmd_status = 0;
+	mutex_unlock(&wq->wq_lock);
+	return 0;
+
+err_cdev:
+	__drv_disable_wq(wq);
+err:
+	wq->type = IDXD_WQT_NONE;
+	mutex_unlock(&wq->wq_lock);
+	return rc;
+}
+
+static void idxd_user_drv_remove(struct idxd_dev *idxd_dev)
+{
+	struct idxd_wq *wq = idxd_dev_to_wq(idxd_dev);
+
+	mutex_lock(&wq->wq_lock);
+	idxd_wq_del_cdev(wq);
+	__drv_disable_wq(wq);
+	wq->type = IDXD_WQT_NONE;
+	mutex_unlock(&wq->wq_lock);
+}
+
+static enum idxd_dev_type dev_types[] = {
+	IDXD_DEV_WQ,
+	IDXD_DEV_NONE,
+};
+
+struct idxd_device_driver idxd_user_drv = {
+	.probe = idxd_user_drv_probe,
+	.remove = idxd_user_drv_remove,
+	.name = "user",
+	.type = dev_types,
+};
+EXPORT_SYMBOL_GPL(idxd_user_drv);
+
 int idxd_cdev_register(void)
 {
 	int rc, i;
diff --git a/drivers/dma/idxd/compat.c b/drivers/dma/idxd/compat.c
new file mode 100644
index 000000000000..3df21615f888
--- /dev/null
+++ b/drivers/dma/idxd/compat.c
@@ -0,0 +1,107 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright(c) 2021 Intel Corporation. All rights rsvd. */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/device/bus.h>
+#include "idxd.h"
+
+extern int device_driver_attach(struct device_driver *drv, struct device *dev);
+extern void device_driver_detach(struct device *dev);
+
+#define DRIVER_ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)	\
+	struct driver_attribute driver_attr_##_name =		\
+	__ATTR_IGNORE_LOCKDEP(_name, _mode, _show, _store)
+
+static ssize_t unbind_store(struct device_driver *drv, const char *buf, size_t count)
+{
+	struct bus_type *bus = drv->bus;
+	struct device *dev;
+	int rc = -ENODEV;
+
+	dev = bus_find_device_by_name(bus, NULL, buf);
+	if (dev && dev->driver) {
+		device_driver_detach(dev);
+		rc = count;
+	}
+
+	return rc;
+}
+static DRIVER_ATTR_IGNORE_LOCKDEP(unbind, 0200, NULL, unbind_store);
+
+static ssize_t bind_store(struct device_driver *drv, const char *buf, size_t count)
+{
+	struct bus_type *bus = drv->bus;
+	struct device *dev;
+	struct device_driver *alt_drv = NULL;
+	int rc = -ENODEV;
+	struct idxd_dev *idxd_dev;
+
+	dev = bus_find_device_by_name(bus, NULL, buf);
+	if (!dev || dev->driver || drv != &dsa_drv.drv)
+		return -ENODEV;
+
+	idxd_dev = confdev_to_idxd_dev(dev);
+	if (is_idxd_dev(idxd_dev)) {
+		alt_drv = driver_find("idxd", bus);
+	} else if (is_idxd_wq_dev(idxd_dev)) {
+		struct idxd_wq *wq = confdev_to_wq(dev);
+
+		if (is_idxd_wq_kernel(wq))
+			alt_drv = driver_find("dmaengine", bus);
+		else if (is_idxd_wq_user(wq))
+			alt_drv = driver_find("user", bus);
+	}
+	if (!alt_drv)
+		return -ENODEV;
+
+	rc = device_driver_attach(alt_drv, dev);
+	if (rc < 0)
+		return rc;
+
+	return count;
+}
+static DRIVER_ATTR_IGNORE_LOCKDEP(bind, 0200, NULL, bind_store);
+
+static struct attribute *dsa_drv_compat_attrs[] = {
+	&driver_attr_bind.attr,
+	&driver_attr_unbind.attr,
+	NULL,
+};
+
+static const struct attribute_group dsa_drv_compat_attr_group = {
+	.attrs = dsa_drv_compat_attrs,
+};
+
+static const struct attribute_group *dsa_drv_compat_groups[] = {
+	&dsa_drv_compat_attr_group,
+	NULL,
+};
+
+static int idxd_dsa_drv_probe(struct idxd_dev *idxd_dev)
+{
+	return -ENODEV;
+}
+
+static void idxd_dsa_drv_remove(struct idxd_dev *idxd_dev)
+{
+}
+
+static enum idxd_dev_type dev_types[] = {
+	IDXD_DEV_NONE,
+};
+
+struct idxd_device_driver dsa_drv = {
+	.name = "dsa",
+	.probe = idxd_dsa_drv_probe,
+	.remove = idxd_dsa_drv_remove,
+	.type = dev_types,
+	.drv = {
+		.suppress_bind_attrs = true,
+		.groups = dsa_drv_compat_groups,
+	},
+};
+
+module_idxd_driver(dsa_drv);
+MODULE_IMPORT_NS(IDXD);
diff --git a/drivers/dma/idxd/device.c b/drivers/dma/idxd/device.c
index 420b93fe5feb..83a5ff2ecf2a 100644
--- a/drivers/dma/idxd/device.c
+++ b/drivers/dma/idxd/device.c
@@ -15,6 +15,8 @@
 
 static void idxd_cmd_exec(struct idxd_device *idxd, int cmd_code, u32 operand,
 			  u32 *status);
+static void idxd_device_wqs_clear_state(struct idxd_device *idxd);
+static void idxd_wq_disable_cleanup(struct idxd_wq *wq);
 
 /* Interrupt control bits */
 void idxd_mask_msix_vector(struct idxd_device *idxd, int vec_id)
@@ -139,8 +141,8 @@ int idxd_wq_alloc_resources(struct idxd_wq *wq)
 	if (wq->type != IDXD_WQT_KERNEL)
 		return 0;
 
-	wq->num_descs = wq->size;
-	num_descs = wq->size;
+	num_descs = wq_dedicated(wq) ? wq->size : wq->threshold;
+	wq->num_descs = num_descs;
 
 	rc = alloc_hw_descs(wq, num_descs);
 	if (rc < 0)
@@ -234,7 +236,7 @@ int idxd_wq_enable(struct idxd_wq *wq)
 	return 0;
 }
 
-int idxd_wq_disable(struct idxd_wq *wq)
+int idxd_wq_disable(struct idxd_wq *wq, bool reset_config)
 {
 	struct idxd_device *idxd = wq->idxd;
 	struct device *dev = &idxd->pdev->dev;
@@ -255,6 +257,8 @@ int idxd_wq_disable(struct idxd_wq *wq)
 		return -ENXIO;
 	}
 
+	if (reset_config)
+		idxd_wq_disable_cleanup(wq);
 	wq->state = IDXD_WQ_DISABLED;
 	dev_dbg(dev, "WQ %d disabled\n", wq->id);
 	return 0;
@@ -289,6 +293,7 @@ void idxd_wq_reset(struct idxd_wq *wq)
 
 	operand = BIT(wq->id % 16) | ((wq->id / 16) << 16);
 	idxd_cmd_exec(idxd, IDXD_CMD_RESET_WQ, operand, NULL);
+	idxd_wq_disable_cleanup(wq);
 	wq->state = IDXD_WQ_DISABLED;
 }
 
@@ -315,6 +320,7 @@ void idxd_wq_unmap_portal(struct idxd_wq *wq)
 
 	devm_iounmap(dev, wq->portal);
 	wq->portal = NULL;
+	wq->portal_offset = 0;
 }
 
 void idxd_wqs_unmap_portal(struct idxd_device *idxd)
@@ -335,19 +341,18 @@ int idxd_wq_set_pasid(struct idxd_wq *wq, int pasid)
 	int rc;
 	union wqcfg wqcfg;
 	unsigned int offset;
-	unsigned long flags;
 
-	rc = idxd_wq_disable(wq);
+	rc = idxd_wq_disable(wq, false);
 	if (rc < 0)
 		return rc;
 
 	offset = WQCFG_OFFSET(idxd, wq->id, WQCFG_PASID_IDX);
-	spin_lock_irqsave(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
 	wqcfg.bits[WQCFG_PASID_IDX] = ioread32(idxd->reg_base + offset);
 	wqcfg.pasid_en = 1;
 	wqcfg.pasid = pasid;
 	iowrite32(wqcfg.bits[WQCFG_PASID_IDX], idxd->reg_base + offset);
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_unlock(&idxd->dev_lock);
 
 	rc = idxd_wq_enable(wq);
 	if (rc < 0)
@@ -362,19 +367,18 @@ int idxd_wq_disable_pasid(struct idxd_wq *wq)
 	int rc;
 	union wqcfg wqcfg;
 	unsigned int offset;
-	unsigned long flags;
 
-	rc = idxd_wq_disable(wq);
+	rc = idxd_wq_disable(wq, false);
 	if (rc < 0)
 		return rc;
 
 	offset = WQCFG_OFFSET(idxd, wq->id, WQCFG_PASID_IDX);
-	spin_lock_irqsave(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
 	wqcfg.bits[WQCFG_PASID_IDX] = ioread32(idxd->reg_base + offset);
 	wqcfg.pasid_en = 0;
 	wqcfg.pasid = 0;
 	iowrite32(wqcfg.bits[WQCFG_PASID_IDX], idxd->reg_base + offset);
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_unlock(&idxd->dev_lock);
 
 	rc = idxd_wq_enable(wq);
 	if (rc < 0)
@@ -383,11 +387,11 @@ int idxd_wq_disable_pasid(struct idxd_wq *wq)
 	return 0;
 }
 
-void idxd_wq_disable_cleanup(struct idxd_wq *wq)
+static void idxd_wq_disable_cleanup(struct idxd_wq *wq)
 {
 	struct idxd_device *idxd = wq->idxd;
 
-	lockdep_assert_held(&idxd->dev_lock);
+	lockdep_assert_held(&wq->wq_lock);
 	memset(wq->wqcfg, 0, idxd->wqcfg_size);
 	wq->type = IDXD_WQT_NONE;
 	wq->size = 0;
@@ -396,6 +400,7 @@ void idxd_wq_disable_cleanup(struct idxd_wq *wq)
 	wq->priority = 0;
 	wq->ats_dis = 0;
 	clear_bit(WQ_FLAG_DEDICATED, &wq->flags);
+	clear_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags);
 	memset(wq->name, 0, WQ_NAME_SIZE);
 }
 
@@ -455,7 +460,6 @@ int idxd_device_init_reset(struct idxd_device *idxd)
 {
 	struct device *dev = &idxd->pdev->dev;
 	union idxd_command_reg cmd;
-	unsigned long flags;
 
 	if (idxd_device_is_halted(idxd)) {
 		dev_warn(&idxd->pdev->dev, "Device is HALTED!\n");
@@ -465,13 +469,13 @@ int idxd_device_init_reset(struct idxd_device *idxd)
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.cmd = IDXD_CMD_RESET_DEVICE;
 	dev_dbg(dev, "%s: sending reset for init.\n", __func__);
-	spin_lock_irqsave(&idxd->cmd_lock, flags);
+	spin_lock(&idxd->cmd_lock);
 	iowrite32(cmd.bits, idxd->reg_base + IDXD_CMD_OFFSET);
 
 	while (ioread32(idxd->reg_base + IDXD_CMDSTS_OFFSET) &
 	       IDXD_CMDSTS_ACTIVE)
 		cpu_relax();
-	spin_unlock_irqrestore(&idxd->cmd_lock, flags);
+	spin_unlock(&idxd->cmd_lock);
 	return 0;
 }
 
@@ -480,7 +484,7 @@ static void idxd_cmd_exec(struct idxd_device *idxd, int cmd_code, u32 operand,
 {
 	union idxd_command_reg cmd;
 	DECLARE_COMPLETION_ONSTACK(done);
-	unsigned long flags;
+	u32 stat;
 
 	if (idxd_device_is_halted(idxd)) {
 		dev_warn(&idxd->pdev->dev, "Device is HALTED!\n");
@@ -494,7 +498,7 @@ static void idxd_cmd_exec(struct idxd_device *idxd, int cmd_code, u32 operand,
 	cmd.operand = operand;
 	cmd.int_req = 1;
 
-	spin_lock_irqsave(&idxd->cmd_lock, flags);
+	spin_lock(&idxd->cmd_lock);
 	wait_event_lock_irq(idxd->cmd_waitq,
 			    !test_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags),
 			    idxd->cmd_lock);
@@ -511,18 +515,18 @@ static void idxd_cmd_exec(struct idxd_device *idxd, int cmd_code, u32 operand,
 	 * After command submitted, release lock and go to sleep until
 	 * the command completes via interrupt.
 	 */
-	spin_unlock_irqrestore(&idxd->cmd_lock, flags);
+	spin_unlock(&idxd->cmd_lock);
 	wait_for_completion(&done);
-	spin_lock_irqsave(&idxd->cmd_lock, flags);
-	if (status) {
-		*status = ioread32(idxd->reg_base + IDXD_CMDSTS_OFFSET);
-		idxd->cmd_status = *status & GENMASK(7, 0);
-	}
+	stat = ioread32(idxd->reg_base + IDXD_CMDSTS_OFFSET);
+	spin_lock(&idxd->cmd_lock);
+	if (status)
+		*status = stat;
+	idxd->cmd_status = stat & GENMASK(7, 0);
 
 	__clear_bit(IDXD_FLAG_CMD_RUNNING, &idxd->flags);
 	/* Wake up other pending commands */
 	wake_up(&idxd->cmd_waitq);
-	spin_unlock_irqrestore(&idxd->cmd_lock, flags);
+	spin_unlock(&idxd->cmd_lock);
 }
 
 int idxd_device_enable(struct idxd_device *idxd)
@@ -548,27 +552,10 @@ int idxd_device_enable(struct idxd_device *idxd)
 	return 0;
 }
 
-void idxd_device_wqs_clear_state(struct idxd_device *idxd)
-{
-	int i;
-
-	lockdep_assert_held(&idxd->dev_lock);
-
-	for (i = 0; i < idxd->max_wqs; i++) {
-		struct idxd_wq *wq = idxd->wqs[i];
-
-		if (wq->state == IDXD_WQ_ENABLED) {
-			idxd_wq_disable_cleanup(wq);
-			wq->state = IDXD_WQ_DISABLED;
-		}
-	}
-}
-
 int idxd_device_disable(struct idxd_device *idxd)
 {
 	struct device *dev = &idxd->pdev->dev;
 	u32 status;
-	unsigned long flags;
 
 	if (!idxd_is_enabled(idxd)) {
 		dev_dbg(dev, "Device is not enabled\n");
@@ -584,22 +571,20 @@ int idxd_device_disable(struct idxd_device *idxd)
 		return -ENXIO;
 	}
 
-	spin_lock_irqsave(&idxd->dev_lock, flags);
-	idxd_device_wqs_clear_state(idxd);
-	idxd->state = IDXD_DEV_CONF_READY;
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
+	idxd_device_clear_state(idxd);
+	idxd->state = IDXD_DEV_DISABLED;
+	spin_unlock(&idxd->dev_lock);
 	return 0;
 }
 
 void idxd_device_reset(struct idxd_device *idxd)
 {
-	unsigned long flags;
-
 	idxd_cmd_exec(idxd, IDXD_CMD_RESET_DEVICE, 0, NULL);
-	spin_lock_irqsave(&idxd->dev_lock, flags);
-	idxd_device_wqs_clear_state(idxd);
-	idxd->state = IDXD_DEV_CONF_READY;
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
+	idxd_device_clear_state(idxd);
+	idxd->state = IDXD_DEV_DISABLED;
+	spin_unlock(&idxd->dev_lock);
 }
 
 void idxd_device_drain_pasid(struct idxd_device *idxd, int pasid)
@@ -649,7 +634,6 @@ int idxd_device_release_int_handle(struct idxd_device *idxd, int handle,
 	struct device *dev = &idxd->pdev->dev;
 	u32 operand, status;
 	union idxd_command_reg cmd;
-	unsigned long flags;
 
 	if (!(idxd->hw.cmd_cap & BIT(IDXD_CMD_RELEASE_INT_HANDLE)))
 		return -EOPNOTSUPP;
@@ -667,13 +651,13 @@ int idxd_device_release_int_handle(struct idxd_device *idxd, int handle,
 
 	dev_dbg(dev, "cmd: %u operand: %#x\n", IDXD_CMD_RELEASE_INT_HANDLE, operand);
 
-	spin_lock_irqsave(&idxd->cmd_lock, flags);
+	spin_lock(&idxd->cmd_lock);
 	iowrite32(cmd.bits, idxd->reg_base + IDXD_CMD_OFFSET);
 
 	while (ioread32(idxd->reg_base + IDXD_CMDSTS_OFFSET) & IDXD_CMDSTS_ACTIVE)
 		cpu_relax();
 	status = ioread32(idxd->reg_base + IDXD_CMDSTS_OFFSET);
-	spin_unlock_irqrestore(&idxd->cmd_lock, flags);
+	spin_unlock(&idxd->cmd_lock);
 
 	if ((status & IDXD_CMDSTS_ERR_MASK) != IDXD_CMDSTS_SUCCESS) {
 		dev_dbg(dev, "release int handle failed: %#x\n", status);
@@ -685,6 +669,59 @@ int idxd_device_release_int_handle(struct idxd_device *idxd, int handle,
 }
 
 /* Device configuration bits */
+static void idxd_engines_clear_state(struct idxd_device *idxd)
+{
+	struct idxd_engine *engine;
+	int i;
+
+	lockdep_assert_held(&idxd->dev_lock);
+	for (i = 0; i < idxd->max_engines; i++) {
+		engine = idxd->engines[i];
+		engine->group = NULL;
+	}
+}
+
+static void idxd_groups_clear_state(struct idxd_device *idxd)
+{
+	struct idxd_group *group;
+	int i;
+
+	lockdep_assert_held(&idxd->dev_lock);
+	for (i = 0; i < idxd->max_groups; i++) {
+		group = idxd->groups[i];
+		memset(&group->grpcfg, 0, sizeof(group->grpcfg));
+		group->num_engines = 0;
+		group->num_wqs = 0;
+		group->use_token_limit = false;
+		group->tokens_allowed = 0;
+		group->tokens_reserved = 0;
+		group->tc_a = -1;
+		group->tc_b = -1;
+	}
+}
+
+static void idxd_device_wqs_clear_state(struct idxd_device *idxd)
+{
+	int i;
+
+	lockdep_assert_held(&idxd->dev_lock);
+	for (i = 0; i < idxd->max_wqs; i++) {
+		struct idxd_wq *wq = idxd->wqs[i];
+
+		if (wq->state == IDXD_WQ_ENABLED) {
+			idxd_wq_disable_cleanup(wq);
+			wq->state = IDXD_WQ_DISABLED;
+		}
+	}
+}
+
+void idxd_device_clear_state(struct idxd_device *idxd)
+{
+	idxd_groups_clear_state(idxd);
+	idxd_engines_clear_state(idxd);
+	idxd_device_wqs_clear_state(idxd);
+}
+
 void idxd_msix_perm_setup(struct idxd_device *idxd)
 {
 	union msix_perm mperm;
@@ -773,6 +810,15 @@ static int idxd_groups_config_write(struct idxd_device *idxd)
 	return 0;
 }
 
+static bool idxd_device_pasid_priv_enabled(struct idxd_device *idxd)
+{
+	struct pci_dev *pdev = idxd->pdev;
+
+	if (pdev->pasid_enabled && (pdev->pasid_features & PCI_PASID_CAP_PRIV))
+		return true;
+	return false;
+}
+
 static int idxd_wq_config_write(struct idxd_wq *wq)
 {
 	struct idxd_device *idxd = wq->idxd;
@@ -796,6 +842,7 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
 	wq->wqcfg->wq_size = wq->size;
 
 	if (wq->size == 0) {
+		idxd->cmd_status = IDXD_SCMD_WQ_NO_SIZE;
 		dev_warn(dev, "Incorrect work queue size: 0\n");
 		return -EINVAL;
 	}
@@ -804,7 +851,6 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
 	wq->wqcfg->wq_thresh = wq->threshold;
 
 	/* byte 8-11 */
-	wq->wqcfg->priv = !!(wq->type == IDXD_WQT_KERNEL);
 	if (wq_dedicated(wq))
 		wq->wqcfg->mode = 1;
 
@@ -814,6 +860,25 @@ static int idxd_wq_config_write(struct idxd_wq *wq)
 			wq->wqcfg->pasid = idxd->pasid;
 	}
 
+	/*
+	 * Here the priv bit is set depending on the WQ type. priv = 1 if the
+	 * WQ type is kernel to indicate privileged access. This setting only
+	 * matters for dedicated WQ. According to the DSA spec:
+	 * If the WQ is in dedicated mode, WQ PASID Enable is 1, and the
+	 * Privileged Mode Enable field of the PCI Express PASID capability
+	 * is 0, this field must be 0.
+	 *
+	 * In the case of a dedicated kernel WQ that is not able to support
+	 * the PASID cap, then the configuration will be rejected.
+	 */
+	wq->wqcfg->priv = !!(wq->type == IDXD_WQT_KERNEL);
+	if (wq_dedicated(wq) && wq->wqcfg->pasid_en &&
+	    !idxd_device_pasid_priv_enabled(idxd) &&
+	    wq->type == IDXD_WQT_KERNEL) {
+		idxd->cmd_status = IDXD_SCMD_WQ_NO_PRIV;
+		return -EOPNOTSUPP;
+	}
+
 	wq->wqcfg->priority = wq->priority;
 
 	if (idxd->hw.gen_cap.block_on_fault &&
@@ -931,6 +996,7 @@ static int idxd_wqs_setup(struct idxd_device *idxd)
 			continue;
 
 		if (wq_shared(wq) && !device_swq_supported(idxd)) {
+			idxd->cmd_status = IDXD_SCMD_WQ_NO_SWQ_SUPPORT;
 			dev_warn(dev, "No shared wq support but configured.\n");
 			return -EINVAL;
 		}
@@ -939,8 +1005,10 @@ static int idxd_wqs_setup(struct idxd_device *idxd)
 		configured++;
 	}
 
-	if (configured == 0)
+	if (configured == 0) {
+		idxd->cmd_status = IDXD_SCMD_WQ_NONE_CONFIGURED;
 		return -EINVAL;
+	}
 
 	return 0;
 }
@@ -1086,3 +1154,203 @@ int idxd_device_load_config(struct idxd_device *idxd)
 
 	return 0;
 }
+
+int __drv_enable_wq(struct idxd_wq *wq)
+{
+	struct idxd_device *idxd = wq->idxd;
+	struct device *dev = &idxd->pdev->dev;
+	int rc = -ENXIO;
+
+	lockdep_assert_held(&wq->wq_lock);
+
+	if (idxd->state != IDXD_DEV_ENABLED) {
+		idxd->cmd_status = IDXD_SCMD_DEV_NOT_ENABLED;
+		goto err;
+	}
+
+	if (wq->state != IDXD_WQ_DISABLED) {
+		dev_dbg(dev, "wq %d already enabled.\n", wq->id);
+		idxd->cmd_status = IDXD_SCMD_WQ_ENABLED;
+		rc = -EBUSY;
+		goto err;
+	}
+
+	if (!wq->group) {
+		dev_dbg(dev, "wq %d not attached to group.\n", wq->id);
+		idxd->cmd_status = IDXD_SCMD_WQ_NO_GRP;
+		goto err;
+	}
+
+	if (strlen(wq->name) == 0) {
+		idxd->cmd_status = IDXD_SCMD_WQ_NO_NAME;
+		dev_dbg(dev, "wq %d name not set.\n", wq->id);
+		goto err;
+	}
+
+	/* Shared WQ checks */
+	if (wq_shared(wq)) {
+		if (!device_swq_supported(idxd)) {
+			idxd->cmd_status = IDXD_SCMD_WQ_NO_SVM;
+			dev_dbg(dev, "PASID not enabled and shared wq.\n");
+			goto err;
+		}
+		/*
+		 * Shared wq with the threshold set to 0 means the user
+		 * did not set the threshold or transitioned from a
+		 * dedicated wq but did not set threshold. A value
+		 * of 0 would effectively disable the shared wq. The
+		 * driver does not allow a value of 0 to be set for
+		 * threshold via sysfs.
+		 */
+		if (wq->threshold == 0) {
+			idxd->cmd_status = IDXD_SCMD_WQ_NO_THRESH;
+			dev_dbg(dev, "Shared wq and threshold 0.\n");
+			goto err;
+		}
+	}
+
+	rc = 0;
+	spin_lock(&idxd->dev_lock);
+	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		rc = idxd_device_config(idxd);
+	spin_unlock(&idxd->dev_lock);
+	if (rc < 0) {
+		dev_dbg(dev, "Writing wq %d config failed: %d\n", wq->id, rc);
+		goto err;
+	}
+
+	rc = idxd_wq_enable(wq);
+	if (rc < 0) {
+		dev_dbg(dev, "wq %d enabling failed: %d\n", wq->id, rc);
+		goto err;
+	}
+
+	rc = idxd_wq_map_portal(wq);
+	if (rc < 0) {
+		idxd->cmd_status = IDXD_SCMD_WQ_PORTAL_ERR;
+		dev_dbg(dev, "wq %d portal mapping failed: %d\n", wq->id, rc);
+		goto err_map_portal;
+	}
+
+	wq->client_count = 0;
+	return 0;
+
+err_map_portal:
+	rc = idxd_wq_disable(wq, false);
+	if (rc < 0)
+		dev_dbg(dev, "wq %s disable failed\n", dev_name(wq_confdev(wq)));
+err:
+	return rc;
+}
+
+int drv_enable_wq(struct idxd_wq *wq)
+{
+	int rc;
+
+	mutex_lock(&wq->wq_lock);
+	rc = __drv_enable_wq(wq);
+	mutex_unlock(&wq->wq_lock);
+	return rc;
+}
+
+void __drv_disable_wq(struct idxd_wq *wq)
+{
+	struct idxd_device *idxd = wq->idxd;
+	struct device *dev = &idxd->pdev->dev;
+
+	lockdep_assert_held(&wq->wq_lock);
+
+	if (idxd_wq_refcount(wq))
+		dev_warn(dev, "Clients has claim on wq %d: %d\n",
+			 wq->id, idxd_wq_refcount(wq));
+
+	idxd_wq_unmap_portal(wq);
+
+	idxd_wq_drain(wq);
+	idxd_wq_reset(wq);
+
+	wq->client_count = 0;
+}
+
+void drv_disable_wq(struct idxd_wq *wq)
+{
+	mutex_lock(&wq->wq_lock);
+	__drv_disable_wq(wq);
+	mutex_unlock(&wq->wq_lock);
+}
+
+int idxd_device_drv_probe(struct idxd_dev *idxd_dev)
+{
+	struct idxd_device *idxd = idxd_dev_to_idxd(idxd_dev);
+	int rc = 0;
+
+	/*
+	 * Device should be in disabled state for the idxd_drv to load. If it's in
+	 * enabled state, then the device was altered outside of driver's control.
+	 * If the state is in halted state, then we don't want to proceed.
+	 */
+	if (idxd->state != IDXD_DEV_DISABLED) {
+		idxd->cmd_status = IDXD_SCMD_DEV_ENABLED;
+		return -ENXIO;
+	}
+
+	/* Device configuration */
+	spin_lock(&idxd->dev_lock);
+	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		rc = idxd_device_config(idxd);
+	spin_unlock(&idxd->dev_lock);
+	if (rc < 0)
+		return -ENXIO;
+
+	/* Start device */
+	rc = idxd_device_enable(idxd);
+	if (rc < 0)
+		return rc;
+
+	/* Setup DMA device without channels */
+	rc = idxd_register_dma_device(idxd);
+	if (rc < 0) {
+		idxd_device_disable(idxd);
+		idxd->cmd_status = IDXD_SCMD_DEV_DMA_ERR;
+		return rc;
+	}
+
+	idxd->cmd_status = 0;
+	return 0;
+}
+
+void idxd_device_drv_remove(struct idxd_dev *idxd_dev)
+{
+	struct device *dev = &idxd_dev->conf_dev;
+	struct idxd_device *idxd = idxd_dev_to_idxd(idxd_dev);
+	int i;
+
+	for (i = 0; i < idxd->max_wqs; i++) {
+		struct idxd_wq *wq = idxd->wqs[i];
+		struct device *wq_dev = wq_confdev(wq);
+
+		if (wq->state == IDXD_WQ_DISABLED)
+			continue;
+		dev_warn(dev, "Active wq %d on disable %s.\n", i, dev_name(wq_dev));
+		device_release_driver(wq_dev);
+	}
+
+	idxd_unregister_dma_device(idxd);
+	idxd_device_disable(idxd);
+	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
+		idxd_device_reset(idxd);
+}
+
+static enum idxd_dev_type dev_types[] = {
+	IDXD_DEV_DSA,
+	IDXD_DEV_IAX,
+	IDXD_DEV_NONE,
+};
+
+struct idxd_device_driver idxd_drv = {
+	.type = dev_types,
+	.probe = idxd_device_drv_probe,
+	.remove = idxd_device_drv_remove,
+	.name = "idxd",
+};
+EXPORT_SYMBOL_GPL(idxd_drv);
diff --git a/drivers/dma/idxd/dma.c b/drivers/dma/idxd/dma.c
index 77439b645044..e0f056c1d1f5 100644
--- a/drivers/dma/idxd/dma.c
+++ b/drivers/dma/idxd/dma.c
@@ -69,7 +69,11 @@ static inline void idxd_prep_desc_common(struct idxd_wq *wq,
 	hw->src_addr = addr_f1;
 	hw->dst_addr = addr_f2;
 	hw->xfer_size = len;
-	hw->priv = !!(wq->type == IDXD_WQT_KERNEL);
+	/*
+	 * For dedicated WQ, this field is ignored and HW will use the WQCFG.priv
+	 * field instead. This field should be set to 1 for kernel descriptors.
+	 */
+	hw->priv = 1;
 	hw->completion_addr = compl;
 }
 
@@ -149,10 +153,8 @@ static dma_cookie_t idxd_dma_tx_submit(struct dma_async_tx_descriptor *tx)
 	cookie = dma_cookie_assign(tx);
 
 	rc = idxd_submit_desc(wq, desc);
-	if (rc < 0) {
-		idxd_free_desc(wq, desc);
+	if (rc < 0)
 		return rc;
-	}
 
 	return cookie;
 }
@@ -245,7 +247,7 @@ int idxd_register_dma_channel(struct idxd_wq *wq)
 
 	wq->idxd_chan = idxd_chan;
 	idxd_chan->wq = wq;
-	get_device(&wq->conf_dev);
+	get_device(wq_confdev(wq));
 
 	return 0;
 }
@@ -260,5 +262,87 @@ void idxd_unregister_dma_channel(struct idxd_wq *wq)
 	list_del(&chan->device_node);
 	kfree(wq->idxd_chan);
 	wq->idxd_chan = NULL;
-	put_device(&wq->conf_dev);
+	put_device(wq_confdev(wq));
 }
+
+static int idxd_dmaengine_drv_probe(struct idxd_dev *idxd_dev)
+{
+	struct device *dev = &idxd_dev->conf_dev;
+	struct idxd_wq *wq = idxd_dev_to_wq(idxd_dev);
+	struct idxd_device *idxd = wq->idxd;
+	int rc;
+
+	if (idxd->state != IDXD_DEV_ENABLED)
+		return -ENXIO;
+
+	mutex_lock(&wq->wq_lock);
+	wq->type = IDXD_WQT_KERNEL;
+	rc = __drv_enable_wq(wq);
+	if (rc < 0) {
+		dev_dbg(dev, "Enable wq %d failed: %d\n", wq->id, rc);
+		rc = -ENXIO;
+		goto err;
+	}
+
+	rc = idxd_wq_alloc_resources(wq);
+	if (rc < 0) {
+		idxd->cmd_status = IDXD_SCMD_WQ_RES_ALLOC_ERR;
+		dev_dbg(dev, "WQ resource alloc failed\n");
+		goto err_res_alloc;
+	}
+
+	rc = idxd_wq_init_percpu_ref(wq);
+	if (rc < 0) {
+		idxd->cmd_status = IDXD_SCMD_PERCPU_ERR;
+		dev_dbg(dev, "percpu_ref setup failed\n");
+		goto err_ref;
+	}
+
+	rc = idxd_register_dma_channel(wq);
+	if (rc < 0) {
+		idxd->cmd_status = IDXD_SCMD_DMA_CHAN_ERR;
+		dev_dbg(dev, "Failed to register dma channel\n");
+		goto err_dma;
+	}
+
+	idxd->cmd_status = 0;
+	mutex_unlock(&wq->wq_lock);
+	return 0;
+
+err_dma:
+	idxd_wq_quiesce(wq);
+err_ref:
+	idxd_wq_free_resources(wq);
+err_res_alloc:
+	__drv_disable_wq(wq);
+err:
+	wq->type = IDXD_WQT_NONE;
+	mutex_unlock(&wq->wq_lock);
+	return rc;
+}
+
+static void idxd_dmaengine_drv_remove(struct idxd_dev *idxd_dev)
+{
+	struct idxd_wq *wq = idxd_dev_to_wq(idxd_dev);
+
+	mutex_lock(&wq->wq_lock);
+	idxd_wq_quiesce(wq);
+	idxd_unregister_dma_channel(wq);
+	__drv_disable_wq(wq);
+	idxd_wq_free_resources(wq);
+	wq->type = IDXD_WQT_NONE;
+	mutex_unlock(&wq->wq_lock);
+}
+
+static enum idxd_dev_type dev_types[] = {
+	IDXD_DEV_WQ,
+	IDXD_DEV_NONE,
+};
+
+struct idxd_device_driver idxd_dmaengine_drv = {
+	.probe = idxd_dmaengine_drv_probe,
+	.remove = idxd_dmaengine_drv_remove,
+	.name = "dmaengine",
+	.type = dev_types,
+};
+EXPORT_SYMBOL_GPL(idxd_dmaengine_drv);
diff --git a/drivers/dma/idxd/idxd.h b/drivers/dma/idxd/idxd.h
index fc708be7ad9a..bfcb03329f77 100644
--- a/drivers/dma/idxd/idxd.h
+++ b/drivers/dma/idxd/idxd.h
@@ -11,14 +11,32 @@
 #include <linux/idr.h>
 #include <linux/pci.h>
 #include <linux/perf_event.h>
+#include <uapi/linux/idxd.h>
 #include "registers.h"
 
 #define IDXD_DRIVER_VERSION	"1.00"
 
 extern struct kmem_cache *idxd_desc_pool;
+extern bool tc_override;
 
-struct idxd_device;
 struct idxd_wq;
+struct idxd_dev;
+
+enum idxd_dev_type {
+	IDXD_DEV_NONE = -1,
+	IDXD_DEV_DSA = 0,
+	IDXD_DEV_IAX,
+	IDXD_DEV_WQ,
+	IDXD_DEV_GROUP,
+	IDXD_DEV_ENGINE,
+	IDXD_DEV_CDEV,
+	IDXD_DEV_MAX_TYPE,
+};
+
+struct idxd_dev {
+	struct device conf_dev;
+	enum idxd_dev_type type;
+};
 
 #define IDXD_REG_TIMEOUT	50
 #define IDXD_DRAIN_TIMEOUT	5000
@@ -34,9 +52,18 @@ enum idxd_type {
 #define IDXD_PMU_EVENT_MAX	64
 
 struct idxd_device_driver {
+	const char *name;
+	enum idxd_dev_type *type;
+	int (*probe)(struct idxd_dev *idxd_dev);
+	void (*remove)(struct idxd_dev *idxd_dev);
 	struct device_driver drv;
 };
 
+extern struct idxd_device_driver dsa_drv;
+extern struct idxd_device_driver idxd_drv;
+extern struct idxd_device_driver idxd_dmaengine_drv;
+extern struct idxd_device_driver idxd_user_drv;
+
 struct idxd_irq_entry {
 	struct idxd_device *idxd;
 	int id;
@@ -51,7 +78,7 @@ struct idxd_irq_entry {
 };
 
 struct idxd_group {
-	struct device conf_dev;
+	struct idxd_dev idxd_dev;
 	struct idxd_device *idxd;
 	struct grpcfg grpcfg;
 	int id;
@@ -110,7 +137,7 @@ enum idxd_wq_type {
 struct idxd_cdev {
 	struct idxd_wq *wq;
 	struct cdev cdev;
-	struct device dev;
+	struct idxd_dev idxd_dev;
 	int minor;
 };
 
@@ -136,9 +163,10 @@ struct idxd_dma_chan {
 
 struct idxd_wq {
 	void __iomem *portal;
+	u32 portal_offset;
 	struct percpu_ref wq_active;
 	struct completion wq_dead;
-	struct device conf_dev;
+	struct idxd_dev idxd_dev;
 	struct idxd_cdev *idxd_cdev;
 	struct wait_queue_head err_queue;
 	struct idxd_device *idxd;
@@ -153,7 +181,6 @@ struct idxd_wq {
 	enum idxd_wq_state state;
 	unsigned long flags;
 	union wqcfg *wqcfg;
-	u32 vec_ptr;		/* interrupt steering */
 	struct dsa_hw_desc **hw_descs;
 	int num_descs;
 	union {
@@ -174,7 +201,7 @@ struct idxd_wq {
 };
 
 struct idxd_engine {
-	struct device conf_dev;
+	struct idxd_dev idxd_dev;
 	int id;
 	struct idxd_group *group;
 	struct idxd_device *idxd;
@@ -194,7 +221,6 @@ struct idxd_hw {
 enum idxd_device_state {
 	IDXD_DEV_HALTED = -1,
 	IDXD_DEV_DISABLED = 0,
-	IDXD_DEV_CONF_READY,
 	IDXD_DEV_ENABLED,
 };
 
@@ -218,7 +244,7 @@ struct idxd_driver_data {
 };
 
 struct idxd_device {
-	struct device conf_dev;
+	struct idxd_dev idxd_dev;
 	struct idxd_driver_data *data;
 	struct list_head list;
 	struct idxd_hw hw;
@@ -226,7 +252,7 @@ struct idxd_device {
 	unsigned long flags;
 	int id;
 	int major;
-	u8 cmd_status;
+	u32 cmd_status;
 
 	struct pci_dev *pdev;
 	void __iomem *reg_base;
@@ -290,7 +316,6 @@ struct idxd_desc {
 	struct list_head list;
 	int id;
 	int cpu;
-	unsigned int vector;
 	struct idxd_wq *wq;
 };
 
@@ -302,11 +327,62 @@ enum idxd_completion_status {
 	IDXD_COMP_DESC_ABORT = 0xff,
 };
 
-#define confdev_to_idxd(dev) container_of(dev, struct idxd_device, conf_dev)
-#define confdev_to_wq(dev) container_of(dev, struct idxd_wq, conf_dev)
+#define idxd_confdev(idxd) &idxd->idxd_dev.conf_dev
+#define wq_confdev(wq) &wq->idxd_dev.conf_dev
+#define engine_confdev(engine) &engine->idxd_dev.conf_dev
+#define group_confdev(group) &group->idxd_dev.conf_dev
+#define cdev_dev(cdev) &cdev->idxd_dev.conf_dev
+
+#define confdev_to_idxd_dev(dev) container_of(dev, struct idxd_dev, conf_dev)
+#define idxd_dev_to_idxd(idxd_dev) container_of(idxd_dev, struct idxd_device, idxd_dev)
+#define idxd_dev_to_wq(idxd_dev) container_of(idxd_dev, struct idxd_wq, idxd_dev)
+
+static inline struct idxd_device *confdev_to_idxd(struct device *dev)
+{
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return idxd_dev_to_idxd(idxd_dev);
+}
+
+static inline struct idxd_wq *confdev_to_wq(struct device *dev)
+{
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return idxd_dev_to_wq(idxd_dev);
+}
+
+static inline struct idxd_engine *confdev_to_engine(struct device *dev)
+{
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return container_of(idxd_dev, struct idxd_engine, idxd_dev);
+}
+
+static inline struct idxd_group *confdev_to_group(struct device *dev)
+{
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return container_of(idxd_dev, struct idxd_group, idxd_dev);
+}
+
+static inline struct idxd_cdev *dev_to_cdev(struct device *dev)
+{
+	struct idxd_dev *idxd_dev = confdev_to_idxd_dev(dev);
+
+	return container_of(idxd_dev, struct idxd_cdev, idxd_dev);
+}
+
+static inline void idxd_dev_set_type(struct idxd_dev *idev, int type)
+{
+	if (type >= IDXD_DEV_MAX_TYPE) {
+		idev->type = IDXD_DEV_NONE;
+		return;
+	}
+
+	idev->type = type;
+}
 
 extern struct bus_type dsa_bus_type;
-extern struct bus_type iax_bus_type;
 
 extern bool support_enqcmd;
 extern struct ida idxd_ida;
@@ -316,24 +392,24 @@ extern struct device_type idxd_wq_device_type;
 extern struct device_type idxd_engine_device_type;
 extern struct device_type idxd_group_device_type;
 
-static inline bool is_dsa_dev(struct device *dev)
+static inline bool is_dsa_dev(struct idxd_dev *idxd_dev)
 {
-	return dev->type == &dsa_device_type;
+	return idxd_dev->type == IDXD_DEV_DSA;
 }
 
-static inline bool is_iax_dev(struct device *dev)
+static inline bool is_iax_dev(struct idxd_dev *idxd_dev)
 {
-	return dev->type == &iax_device_type;
+	return idxd_dev->type == IDXD_DEV_IAX;
 }
 
-static inline bool is_idxd_dev(struct device *dev)
+static inline bool is_idxd_dev(struct idxd_dev *idxd_dev)
 {
-	return is_dsa_dev(dev) || is_iax_dev(dev);
+	return is_dsa_dev(idxd_dev) || is_iax_dev(idxd_dev);
 }
 
-static inline bool is_idxd_wq_dev(struct device *dev)
+static inline bool is_idxd_wq_dev(struct idxd_dev *idxd_dev)
 {
-	return dev->type == &idxd_wq_device_type;
+	return idxd_dev->type == IDXD_DEV_WQ;
 }
 
 static inline bool is_idxd_wq_dmaengine(struct idxd_wq *wq)
@@ -343,11 +419,16 @@ static inline bool is_idxd_wq_dmaengine(struct idxd_wq *wq)
 	return false;
 }
 
-static inline bool is_idxd_wq_cdev(struct idxd_wq *wq)
+static inline bool is_idxd_wq_user(struct idxd_wq *wq)
 {
 	return wq->type == IDXD_WQT_USER;
 }
 
+static inline bool is_idxd_wq_kernel(struct idxd_wq *wq)
+{
+	return wq->type == IDXD_WQT_KERNEL;
+}
+
 static inline bool wq_dedicated(struct idxd_wq *wq)
 {
 	return test_bit(WQ_FLAG_DEDICATED, &wq->flags);
@@ -389,6 +470,24 @@ static inline int idxd_get_wq_portal_full_offset(int wq_id,
 	return ((wq_id * 4) << PAGE_SHIFT) + idxd_get_wq_portal_offset(prot);
 }
 
+#define IDXD_PORTAL_MASK	(PAGE_SIZE - 1)
+
+/*
+ * Even though this function can be accessed by multiple threads, it is safe to use.
+ * At worst the address gets used more than once before it gets incremented. We don't
+ * hit a threshold until iops becomes many million times a second. So the occasional
+ * reuse of the same address is tolerable compare to using an atomic variable. This is
+ * safe on a system that has atomic load/store for 32bit integers. Given that this is an
+ * Intel iEP device, that should not be a problem.
+ */
+static inline void __iomem *idxd_wq_portal_addr(struct idxd_wq *wq)
+{
+	int ofs = wq->portal_offset;
+
+	wq->portal_offset = (ofs + sizeof(struct dsa_raw_desc)) & IDXD_PORTAL_MASK;
+	return wq->portal + ofs;
+}
+
 static inline void idxd_wq_get(struct idxd_wq *wq)
 {
 	wq->client_count++;
@@ -404,6 +503,16 @@ static inline int idxd_wq_refcount(struct idxd_wq *wq)
 	return wq->client_count;
 };
 
+int __must_check __idxd_driver_register(struct idxd_device_driver *idxd_drv,
+					struct module *module, const char *mod_name);
+#define idxd_driver_register(driver) \
+	__idxd_driver_register(driver, THIS_MODULE, KBUILD_MODNAME)
+
+void idxd_driver_unregister(struct idxd_device_driver *idxd_drv);
+
+#define module_idxd_driver(__idxd_driver) \
+	module_driver(__idxd_driver, idxd_driver_register, idxd_driver_unregister)
+
 int idxd_register_bus_type(void);
 void idxd_unregister_bus_type(void);
 int idxd_register_devices(struct idxd_device *idxd);
@@ -424,13 +533,20 @@ void idxd_mask_msix_vector(struct idxd_device *idxd, int vec_id);
 void idxd_unmask_msix_vector(struct idxd_device *idxd, int vec_id);
 
 /* device control */
+int idxd_register_idxd_drv(void);
+void idxd_unregister_idxd_drv(void);
+int idxd_device_drv_probe(struct idxd_dev *idxd_dev);
+void idxd_device_drv_remove(struct idxd_dev *idxd_dev);
+int drv_enable_wq(struct idxd_wq *wq);
+int __drv_enable_wq(struct idxd_wq *wq);
+void drv_disable_wq(struct idxd_wq *wq);
+void __drv_disable_wq(struct idxd_wq *wq);
 int idxd_device_init_reset(struct idxd_device *idxd);
 int idxd_device_enable(struct idxd_device *idxd);
 int idxd_device_disable(struct idxd_device *idxd);
 void idxd_device_reset(struct idxd_device *idxd);
-void idxd_device_cleanup(struct idxd_device *idxd);
+void idxd_device_clear_state(struct idxd_device *idxd);
 int idxd_device_config(struct idxd_device *idxd);
-void idxd_device_wqs_clear_state(struct idxd_device *idxd);
 void idxd_device_drain_pasid(struct idxd_device *idxd, int pasid);
 int idxd_device_load_config(struct idxd_device *idxd);
 int idxd_device_request_int_handle(struct idxd_device *idxd, int idx, int *handle,
@@ -443,12 +559,11 @@ void idxd_wqs_unmap_portal(struct idxd_device *idxd);
 int idxd_wq_alloc_resources(struct idxd_wq *wq);
 void idxd_wq_free_resources(struct idxd_wq *wq);
 int idxd_wq_enable(struct idxd_wq *wq);
-int idxd_wq_disable(struct idxd_wq *wq);
+int idxd_wq_disable(struct idxd_wq *wq, bool reset_config);
 void idxd_wq_drain(struct idxd_wq *wq);
 void idxd_wq_reset(struct idxd_wq *wq);
 int idxd_wq_map_portal(struct idxd_wq *wq);
 void idxd_wq_unmap_portal(struct idxd_wq *wq);
-void idxd_wq_disable_cleanup(struct idxd_wq *wq);
 int idxd_wq_set_pasid(struct idxd_wq *wq, int pasid);
 int idxd_wq_disable_pasid(struct idxd_wq *wq);
 void idxd_wq_quiesce(struct idxd_wq *wq);
diff --git a/drivers/dma/idxd/init.c b/drivers/dma/idxd/init.c
index c0f4c0422f32..eb09bc591c31 100644
--- a/drivers/dma/idxd/init.c
+++ b/drivers/dma/idxd/init.c
@@ -26,11 +26,16 @@
 MODULE_VERSION(IDXD_DRIVER_VERSION);
 MODULE_LICENSE("GPL v2");
 MODULE_AUTHOR("Intel Corporation");
+MODULE_IMPORT_NS(IDXD);
 
 static bool sva = true;
 module_param(sva, bool, 0644);
 MODULE_PARM_DESC(sva, "Toggle SVA support on/off");
 
+bool tc_override;
+module_param(tc_override, bool, 0644);
+MODULE_PARM_DESC(tc_override, "Override traffic class defaults");
+
 #define DRV_NAME "idxd"
 
 bool support_enqcmd;
@@ -200,6 +205,7 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
 {
 	struct device *dev = &idxd->pdev->dev;
 	struct idxd_wq *wq;
+	struct device *conf_dev;
 	int i, rc;
 
 	idxd->wqs = kcalloc_node(idxd->max_wqs, sizeof(struct idxd_wq *),
@@ -214,15 +220,17 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
 			goto err;
 		}
 
+		idxd_dev_set_type(&wq->idxd_dev, IDXD_DEV_WQ);
+		conf_dev = wq_confdev(wq);
 		wq->id = i;
 		wq->idxd = idxd;
-		device_initialize(&wq->conf_dev);
-		wq->conf_dev.parent = &idxd->conf_dev;
-		wq->conf_dev.bus = &dsa_bus_type;
-		wq->conf_dev.type = &idxd_wq_device_type;
-		rc = dev_set_name(&wq->conf_dev, "wq%d.%d", idxd->id, wq->id);
+		device_initialize(wq_confdev(wq));
+		conf_dev->parent = idxd_confdev(idxd);
+		conf_dev->bus = &dsa_bus_type;
+		conf_dev->type = &idxd_wq_device_type;
+		rc = dev_set_name(conf_dev, "wq%d.%d", idxd->id, wq->id);
 		if (rc < 0) {
-			put_device(&wq->conf_dev);
+			put_device(conf_dev);
 			goto err;
 		}
 
@@ -233,7 +241,7 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
 		wq->max_batch_size = idxd->max_batch_size;
 		wq->wqcfg = kzalloc_node(idxd->wqcfg_size, GFP_KERNEL, dev_to_node(dev));
 		if (!wq->wqcfg) {
-			put_device(&wq->conf_dev);
+			put_device(conf_dev);
 			rc = -ENOMEM;
 			goto err;
 		}
@@ -243,8 +251,11 @@ static int idxd_setup_wqs(struct idxd_device *idxd)
 	return 0;
 
  err:
-	while (--i >= 0)
-		put_device(&idxd->wqs[i]->conf_dev);
+	while (--i >= 0) {
+		wq = idxd->wqs[i];
+		conf_dev = wq_confdev(wq);
+		put_device(conf_dev);
+	}
 	return rc;
 }
 
@@ -252,6 +263,7 @@ static int idxd_setup_engines(struct idxd_device *idxd)
 {
 	struct idxd_engine *engine;
 	struct device *dev = &idxd->pdev->dev;
+	struct device *conf_dev;
 	int i, rc;
 
 	idxd->engines = kcalloc_node(idxd->max_engines, sizeof(struct idxd_engine *),
@@ -266,15 +278,17 @@ static int idxd_setup_engines(struct idxd_device *idxd)
 			goto err;
 		}
 
+		idxd_dev_set_type(&engine->idxd_dev, IDXD_DEV_ENGINE);
+		conf_dev = engine_confdev(engine);
 		engine->id = i;
 		engine->idxd = idxd;
-		device_initialize(&engine->conf_dev);
-		engine->conf_dev.parent = &idxd->conf_dev;
-		engine->conf_dev.bus = &dsa_bus_type;
-		engine->conf_dev.type = &idxd_engine_device_type;
-		rc = dev_set_name(&engine->conf_dev, "engine%d.%d", idxd->id, engine->id);
+		device_initialize(conf_dev);
+		conf_dev->parent = idxd_confdev(idxd);
+		conf_dev->bus = &dsa_bus_type;
+		conf_dev->type = &idxd_engine_device_type;
+		rc = dev_set_name(conf_dev, "engine%d.%d", idxd->id, engine->id);
 		if (rc < 0) {
-			put_device(&engine->conf_dev);
+			put_device(conf_dev);
 			goto err;
 		}
 
@@ -284,14 +298,18 @@ static int idxd_setup_engines(struct idxd_device *idxd)
 	return 0;
 
  err:
-	while (--i >= 0)
-		put_device(&idxd->engines[i]->conf_dev);
+	while (--i >= 0) {
+		engine = idxd->engines[i];
+		conf_dev = engine_confdev(engine);
+		put_device(conf_dev);
+	}
 	return rc;
 }
 
 static int idxd_setup_groups(struct idxd_device *idxd)
 {
 	struct device *dev = &idxd->pdev->dev;
+	struct device *conf_dev;
 	struct idxd_group *group;
 	int i, rc;
 
@@ -307,28 +325,37 @@ static int idxd_setup_groups(struct idxd_device *idxd)
 			goto err;
 		}
 
+		idxd_dev_set_type(&group->idxd_dev, IDXD_DEV_GROUP);
+		conf_dev = group_confdev(group);
 		group->id = i;
 		group->idxd = idxd;
-		device_initialize(&group->conf_dev);
-		group->conf_dev.parent = &idxd->conf_dev;
-		group->conf_dev.bus = &dsa_bus_type;
-		group->conf_dev.type = &idxd_group_device_type;
-		rc = dev_set_name(&group->conf_dev, "group%d.%d", idxd->id, group->id);
+		device_initialize(conf_dev);
+		conf_dev->parent = idxd_confdev(idxd);
+		conf_dev->bus = &dsa_bus_type;
+		conf_dev->type = &idxd_group_device_type;
+		rc = dev_set_name(conf_dev, "group%d.%d", idxd->id, group->id);
 		if (rc < 0) {
-			put_device(&group->conf_dev);
+			put_device(conf_dev);
 			goto err;
 		}
 
 		idxd->groups[i] = group;
-		group->tc_a = -1;
-		group->tc_b = -1;
+		if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override) {
+			group->tc_a = 1;
+			group->tc_b = 1;
+		} else {
+			group->tc_a = -1;
+			group->tc_b = -1;
+		}
 	}
 
 	return 0;
 
  err:
-	while (--i >= 0)
-		put_device(&idxd->groups[i]->conf_dev);
+	while (--i >= 0) {
+		group = idxd->groups[i];
+		put_device(group_confdev(group));
+	}
 	return rc;
 }
 
@@ -337,11 +364,11 @@ static void idxd_cleanup_internals(struct idxd_device *idxd)
 	int i;
 
 	for (i = 0; i < idxd->max_groups; i++)
-		put_device(&idxd->groups[i]->conf_dev);
+		put_device(group_confdev(idxd->groups[i]));
 	for (i = 0; i < idxd->max_engines; i++)
-		put_device(&idxd->engines[i]->conf_dev);
+		put_device(engine_confdev(idxd->engines[i]));
 	for (i = 0; i < idxd->max_wqs; i++)
-		put_device(&idxd->wqs[i]->conf_dev);
+		put_device(wq_confdev(idxd->wqs[i]));
 	destroy_workqueue(idxd->wq);
 }
 
@@ -381,13 +408,13 @@ static int idxd_setup_internals(struct idxd_device *idxd)
 
  err_wkq_create:
 	for (i = 0; i < idxd->max_groups; i++)
-		put_device(&idxd->groups[i]->conf_dev);
+		put_device(group_confdev(idxd->groups[i]));
  err_group:
 	for (i = 0; i < idxd->max_engines; i++)
-		put_device(&idxd->engines[i]->conf_dev);
+		put_device(engine_confdev(idxd->engines[i]));
  err_engine:
 	for (i = 0; i < idxd->max_wqs; i++)
-		put_device(&idxd->wqs[i]->conf_dev);
+		put_device(wq_confdev(idxd->wqs[i]));
  err_wqs:
 	kfree(idxd->int_handles);
 	return rc;
@@ -469,6 +496,7 @@ static void idxd_read_caps(struct idxd_device *idxd)
 static struct idxd_device *idxd_alloc(struct pci_dev *pdev, struct idxd_driver_data *data)
 {
 	struct device *dev = &pdev->dev;
+	struct device *conf_dev;
 	struct idxd_device *idxd;
 	int rc;
 
@@ -476,19 +504,21 @@ static struct idxd_device *idxd_alloc(struct pci_dev *pdev, struct idxd_driver_d
 	if (!idxd)
 		return NULL;
 
+	conf_dev = idxd_confdev(idxd);
 	idxd->pdev = pdev;
 	idxd->data = data;
+	idxd_dev_set_type(&idxd->idxd_dev, idxd->data->type);
 	idxd->id = ida_alloc(&idxd_ida, GFP_KERNEL);
 	if (idxd->id < 0)
 		return NULL;
 
-	device_initialize(&idxd->conf_dev);
-	idxd->conf_dev.parent = dev;
-	idxd->conf_dev.bus = &dsa_bus_type;
-	idxd->conf_dev.type = idxd->data->dev_type;
-	rc = dev_set_name(&idxd->conf_dev, "%s%d", idxd->data->name_prefix, idxd->id);
+	device_initialize(conf_dev);
+	conf_dev->parent = dev;
+	conf_dev->bus = &dsa_bus_type;
+	conf_dev->type = idxd->data->dev_type;
+	rc = dev_set_name(conf_dev, "%s%d", idxd->data->name_prefix, idxd->id);
 	if (rc < 0) {
-		put_device(&idxd->conf_dev);
+		put_device(conf_dev);
 		return NULL;
 	}
 
@@ -639,15 +669,9 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}
 
 	dev_dbg(dev, "Set DMA masks\n");
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc)
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
-	if (rc)
-		goto err;
-
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (rc)
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 	if (rc)
 		goto err;
 
@@ -668,8 +692,6 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		goto err_dev_register;
 	}
 
-	idxd->state = IDXD_DEV_CONF_READY;
-
 	dev_info(&pdev->dev, "Intel(R) Accelerator Device (v%x)\n",
 		 idxd->hw.version);
 
@@ -680,7 +702,7 @@ static int idxd_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
  err:
 	pci_iounmap(pdev, idxd->reg_base);
  err_iomap:
-	put_device(&idxd->conf_dev);
+	put_device(idxd_confdev(idxd));
  err_idxd_alloc:
 	pci_disable_device(pdev);
 	return rc;
@@ -793,7 +815,7 @@ static void idxd_remove(struct pci_dev *pdev)
 	pci_disable_device(pdev);
 	destroy_workqueue(idxd->wq);
 	perfmon_pmu_remove(idxd);
-	device_unregister(&idxd->conf_dev);
+	device_unregister(idxd_confdev(idxd));
 }
 
 static struct pci_driver idxd_pci_driver = {
@@ -824,13 +846,17 @@ static int __init idxd_init_module(void)
 
 	perfmon_init();
 
-	err = idxd_register_bus_type();
+	err = idxd_driver_register(&idxd_drv);
 	if (err < 0)
-		return err;
+		goto err_idxd_driver_register;
 
-	err = idxd_register_driver();
+	err = idxd_driver_register(&idxd_dmaengine_drv);
 	if (err < 0)
-		goto err_idxd_driver_register;
+		goto err_idxd_dmaengine_driver_register;
+
+	err = idxd_driver_register(&idxd_user_drv);
+	if (err < 0)
+		goto err_idxd_user_driver_register;
 
 	err = idxd_cdev_register();
 	if (err)
@@ -845,19 +871,23 @@ static int __init idxd_init_module(void)
 err_pci_register:
 	idxd_cdev_remove();
 err_cdev_register:
-	idxd_unregister_driver();
+	idxd_driver_unregister(&idxd_user_drv);
+err_idxd_user_driver_register:
+	idxd_driver_unregister(&idxd_dmaengine_drv);
+err_idxd_dmaengine_driver_register:
+	idxd_driver_unregister(&idxd_drv);
 err_idxd_driver_register:
-	idxd_unregister_bus_type();
 	return err;
 }
 module_init(idxd_init_module);
 
 static void __exit idxd_exit_module(void)
 {
-	idxd_unregister_driver();
+	idxd_driver_unregister(&idxd_user_drv);
+	idxd_driver_unregister(&idxd_dmaengine_drv);
+	idxd_driver_unregister(&idxd_drv);
 	pci_unregister_driver(&idxd_pci_driver);
 	idxd_cdev_remove();
-	idxd_unregister_bus_type();
 	perfmon_exit();
 }
 module_exit(idxd_exit_module);
diff --git a/drivers/dma/idxd/irq.c b/drivers/dma/idxd/irq.c
index 4e3a7198c0ca..ca88fa7a328e 100644
--- a/drivers/dma/idxd/irq.c
+++ b/drivers/dma/idxd/irq.c
@@ -22,13 +22,6 @@ struct idxd_fault {
 	struct idxd_device *idxd;
 };
 
-static int irq_process_work_list(struct idxd_irq_entry *irq_entry,
-				 enum irq_work_type wtype,
-				 int *processed, u64 data);
-static int irq_process_pending_llist(struct idxd_irq_entry *irq_entry,
-				     enum irq_work_type wtype,
-				     int *processed, u64 data);
-
 static void idxd_device_reinit(struct work_struct *work)
 {
 	struct idxd_device *idxd = container_of(work, struct idxd_device, work);
@@ -51,7 +44,7 @@ static void idxd_device_reinit(struct work_struct *work)
 			rc = idxd_wq_enable(wq);
 			if (rc < 0) {
 				dev_warn(dev, "Unable to re-enable wq %s\n",
-					 dev_name(&wq->conf_dev));
+					 dev_name(wq_confdev(wq)));
 			}
 		}
 	}
@@ -59,47 +52,7 @@ static void idxd_device_reinit(struct work_struct *work)
 	return;
 
  out:
-	idxd_device_wqs_clear_state(idxd);
-}
-
-static void idxd_device_fault_work(struct work_struct *work)
-{
-	struct idxd_fault *fault = container_of(work, struct idxd_fault, work);
-	struct idxd_irq_entry *ie;
-	int i;
-	int processed;
-	int irqcnt = fault->idxd->num_wq_irqs + 1;
-
-	for (i = 1; i < irqcnt; i++) {
-		ie = &fault->idxd->irq_entries[i];
-		irq_process_work_list(ie, IRQ_WORK_PROCESS_FAULT,
-				      &processed, fault->addr);
-		if (processed)
-			break;
-
-		irq_process_pending_llist(ie, IRQ_WORK_PROCESS_FAULT,
-					  &processed, fault->addr);
-		if (processed)
-			break;
-	}
-
-	kfree(fault);
-}
-
-static int idxd_device_schedule_fault_process(struct idxd_device *idxd,
-					      u64 fault_addr)
-{
-	struct idxd_fault *fault;
-
-	fault = kmalloc(sizeof(*fault), GFP_ATOMIC);
-	if (!fault)
-		return -ENOMEM;
-
-	fault->addr = fault_addr;
-	fault->idxd = idxd;
-	INIT_WORK(&fault->work, idxd_device_fault_work);
-	queue_work(idxd->wq, &fault->work);
-	return 0;
+	idxd_device_clear_state(idxd);
 }
 
 static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
@@ -111,7 +64,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
 	bool err = false;
 
 	if (cause & IDXD_INTC_ERR) {
-		spin_lock_bh(&idxd->dev_lock);
+		spin_lock(&idxd->dev_lock);
 		for (i = 0; i < 4; i++)
 			idxd->sw_err.bits[i] = ioread64(idxd->reg_base +
 					IDXD_SWERR_OFFSET + i * sizeof(u64));
@@ -136,7 +89,7 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
 			}
 		}
 
-		spin_unlock_bh(&idxd->dev_lock);
+		spin_unlock(&idxd->dev_lock);
 		val |= IDXD_INTC_ERR;
 
 		for (i = 0; i < 4; i++)
@@ -168,15 +121,6 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
 	if (!err)
 		return 0;
 
-	/*
-	 * This case should rarely happen and typically is due to software
-	 * programming error by the driver.
-	 */
-	if (idxd->sw_err.valid &&
-	    idxd->sw_err.desc_valid &&
-	    idxd->sw_err.fault_addr)
-		idxd_device_schedule_fault_process(idxd, idxd->sw_err.fault_addr);
-
 	gensts.bits = ioread32(idxd->reg_base + IDXD_GENSTATS_OFFSET);
 	if (gensts.state == IDXD_DEVICE_STATE_HALT) {
 		idxd->state = IDXD_DEV_HALTED;
@@ -189,15 +133,15 @@ static int process_misc_interrupts(struct idxd_device *idxd, u32 cause)
 			INIT_WORK(&idxd->work, idxd_device_reinit);
 			queue_work(idxd->wq, &idxd->work);
 		} else {
-			spin_lock_bh(&idxd->dev_lock);
+			spin_lock(&idxd->dev_lock);
 			idxd_wqs_quiesce(idxd);
 			idxd_wqs_unmap_portal(idxd);
-			idxd_device_wqs_clear_state(idxd);
+			idxd_device_clear_state(idxd);
 			dev_err(&idxd->pdev->dev,
 				"idxd halted, need %s.\n",
 				gensts.reset_type == IDXD_DEVICE_RESET_FLR ?
 				"FLR" : "system reset");
-			spin_unlock_bh(&idxd->dev_lock);
+			spin_unlock(&idxd->dev_lock);
 			return -ENXIO;
 		}
 	}
@@ -228,127 +172,79 @@ irqreturn_t idxd_misc_thread(int vec, void *data)
 	return IRQ_HANDLED;
 }
 
-static inline bool match_fault(struct idxd_desc *desc, u64 fault_addr)
-{
-	/*
-	 * Completion address can be bad as well. Check fault address match for descriptor
-	 * and completion address.
-	 */
-	if ((u64)desc->hw == fault_addr || (u64)desc->completion == fault_addr) {
-		struct idxd_device *idxd = desc->wq->idxd;
-		struct device *dev = &idxd->pdev->dev;
-
-		dev_warn(dev, "desc with fault address: %#llx\n", fault_addr);
-		return true;
-	}
-
-	return false;
-}
-
-static int irq_process_pending_llist(struct idxd_irq_entry *irq_entry,
-				     enum irq_work_type wtype,
-				     int *processed, u64 data)
+static void irq_process_pending_llist(struct idxd_irq_entry *irq_entry)
 {
 	struct idxd_desc *desc, *t;
 	struct llist_node *head;
-	int queued = 0;
-	unsigned long flags;
-	enum idxd_complete_type reason;
 
-	*processed = 0;
 	head = llist_del_all(&irq_entry->pending_llist);
 	if (!head)
-		goto out;
-
-	if (wtype == IRQ_WORK_NORMAL)
-		reason = IDXD_COMPLETE_NORMAL;
-	else
-		reason = IDXD_COMPLETE_DEV_FAIL;
+		return;
 
 	llist_for_each_entry_safe(desc, t, head, llnode) {
 		u8 status = desc->completion->status & DSA_COMP_STATUS_MASK;
 
 		if (status) {
-			if (unlikely(status == IDXD_COMP_DESC_ABORT)) {
+			/*
+			 * Check against the original status as ABORT is software defined
+			 * and 0xff, which DSA_COMP_STATUS_MASK can mask out.
+			 */
+			if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
 				complete_desc(desc, IDXD_COMPLETE_ABORT);
-				(*processed)++;
 				continue;
 			}
 
-			if (unlikely(status != DSA_COMP_SUCCESS))
-				match_fault(desc, data);
-			complete_desc(desc, reason);
-			(*processed)++;
+			complete_desc(desc, IDXD_COMPLETE_NORMAL);
 		} else {
-			spin_lock_irqsave(&irq_entry->list_lock, flags);
+			spin_lock(&irq_entry->list_lock);
 			list_add_tail(&desc->list,
 				      &irq_entry->work_list);
-			spin_unlock_irqrestore(&irq_entry->list_lock, flags);
-			queued++;
+			spin_unlock(&irq_entry->list_lock);
 		}
 	}
-
- out:
-	return queued;
 }
 
-static int irq_process_work_list(struct idxd_irq_entry *irq_entry,
-				 enum irq_work_type wtype,
-				 int *processed, u64 data)
+static void irq_process_work_list(struct idxd_irq_entry *irq_entry)
 {
-	int queued = 0;
-	unsigned long flags;
 	LIST_HEAD(flist);
 	struct idxd_desc *desc, *n;
-	enum idxd_complete_type reason;
-
-	*processed = 0;
-	if (wtype == IRQ_WORK_NORMAL)
-		reason = IDXD_COMPLETE_NORMAL;
-	else
-		reason = IDXD_COMPLETE_DEV_FAIL;
 
 	/*
 	 * This lock protects list corruption from access of list outside of the irq handler
 	 * thread.
 	 */
-	spin_lock_irqsave(&irq_entry->list_lock, flags);
+	spin_lock(&irq_entry->list_lock);
 	if (list_empty(&irq_entry->work_list)) {
-		spin_unlock_irqrestore(&irq_entry->list_lock, flags);
-		return 0;
+		spin_unlock(&irq_entry->list_lock);
+		return;
 	}
 
 	list_for_each_entry_safe(desc, n, &irq_entry->work_list, list) {
 		if (desc->completion->status) {
 			list_del(&desc->list);
-			(*processed)++;
 			list_add_tail(&desc->list, &flist);
-		} else {
-			queued++;
 		}
 	}
 
-	spin_unlock_irqrestore(&irq_entry->list_lock, flags);
+	spin_unlock(&irq_entry->list_lock);
 
 	list_for_each_entry(desc, &flist, list) {
-		u8 status = desc->completion->status & DSA_COMP_STATUS_MASK;
-
-		if (unlikely(status == IDXD_COMP_DESC_ABORT)) {
+		/*
+		 * Check against the original status as ABORT is software defined
+		 * and 0xff, which DSA_COMP_STATUS_MASK can mask out.
+		 */
+		if (unlikely(desc->completion->status == IDXD_COMP_DESC_ABORT)) {
 			complete_desc(desc, IDXD_COMPLETE_ABORT);
 			continue;
 		}
 
-		if (unlikely(status != DSA_COMP_SUCCESS))
-			match_fault(desc, data);
-		complete_desc(desc, reason);
+		complete_desc(desc, IDXD_COMPLETE_NORMAL);
 	}
-
-	return queued;
 }
 
-static int idxd_desc_process(struct idxd_irq_entry *irq_entry)
+irqreturn_t idxd_wq_thread(int irq, void *data)
 {
-	int rc, processed, total = 0;
+	struct idxd_irq_entry *irq_entry = data;
 
 	/*
 	 * There are two lists we are processing. The pending_llist is where
@@ -367,31 +263,9 @@ static int idxd_desc_process(struct idxd_irq_entry *irq_entry)
 	 *    and process the completed entries.
 	 * 4. If the entry is still waiting on hardware, list_add_tail() to
 	 *    the work_list.
-	 * 5. Repeat until no more descriptors.
 	 */
-	do {
-		rc = irq_process_work_list(irq_entry, IRQ_WORK_NORMAL,
-					   &processed, 0);
-		total += processed;
-		if (rc != 0)
-			continue;
-
-		rc = irq_process_pending_llist(irq_entry, IRQ_WORK_NORMAL,
-					       &processed, 0);
-		total += processed;
-	} while (rc != 0);
-
-	return total;
-}
-
-irqreturn_t idxd_wq_thread(int irq, void *data)
-{
-	struct idxd_irq_entry *irq_entry = data;
-	int processed;
-
-	processed = idxd_desc_process(irq_entry);
-	if (processed == 0)
-		return IRQ_NONE;
+	irq_process_work_list(irq_entry);
+	irq_process_pending_llist(irq_entry);
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/dma/idxd/registers.h b/drivers/dma/idxd/registers.h
index c970c3f025f0..ffc7550a77ee 100644
--- a/drivers/dma/idxd/registers.h
+++ b/drivers/dma/idxd/registers.h
@@ -7,6 +7,9 @@
 #define PCI_DEVICE_ID_INTEL_DSA_SPR0	0x0b25
 #define PCI_DEVICE_ID_INTEL_IAX_SPR0	0x0cfe
 
+#define DEVICE_VERSION_1		0x100
+#define DEVICE_VERSION_2		0x200
+
 #define IDXD_MMIO_BAR		0
 #define IDXD_WQ_BAR		2
 #define IDXD_PORTAL_SIZE	PAGE_SIZE
@@ -349,6 +352,9 @@ union wqcfg {
 } __packed;
 
 #define WQCFG_PASID_IDX                2
+#define WQCFG_OCCUP_IDX		6
+
+#define WQCFG_OCCUP_MASK	0xffff
 
 /*
  * This macro calculates the offset into the WQCFG register
diff --git a/drivers/dma/idxd/submit.c b/drivers/dma/idxd/submit.c
index 36c9c1a89b7e..de76fb4abac2 100644
--- a/drivers/dma/idxd/submit.c
+++ b/drivers/dma/idxd/submit.c
@@ -22,21 +22,13 @@ static struct idxd_desc *__get_desc(struct idxd_wq *wq, int idx, int cpu)
 		desc->hw->pasid = idxd->pasid;
 
 	/*
-	 * Descriptor completion vectors are 1...N for MSIX. We will round
-	 * robin through the N vectors.
+	 * On host, MSIX vecotr 0 is used for misc interrupt. Therefore when we match
+	 * vector 1:1 to the WQ id, we need to add 1
 	 */
-	wq->vec_ptr = desc->vector = (wq->vec_ptr % idxd->num_wq_irqs) + 1;
-	if (!idxd->int_handles) {
-		desc->hw->int_handle = wq->vec_ptr;
-	} else {
-		/*
-		 * int_handles are only for descriptor completion. However for device
-		 * MSIX enumeration, vec 0 is used for misc interrupts. Therefore even
-		 * though we are rotating through 1...N for descriptor interrupts, we
-		 * need to acqurie the int_handles from 0..N-1.
-		 */
-		desc->hw->int_handle = idxd->int_handles[desc->vector - 1];
-	}
+	if (!idxd->int_handles)
+		desc->hw->int_handle = wq->id + 1;
+	else
+		desc->hw->int_handle = idxd->int_handles[wq->id];
 
 	return desc;
 }
@@ -67,7 +59,7 @@ struct idxd_desc *idxd_alloc_desc(struct idxd_wq *wq, enum idxd_op_type optype)
 		if (signal_pending_state(TASK_INTERRUPTIBLE, current))
 			break;
 		idx = sbitmap_queue_get(sbq, &cpu);
-		if (idx > 0)
+		if (idx >= 0)
 			break;
 		schedule();
 	}
@@ -114,14 +106,13 @@ static void llist_abort_desc(struct idxd_wq *wq, struct idxd_irq_entry *ie,
 {
 	struct idxd_desc *d, *t, *found = NULL;
 	struct llist_node *head;
-	unsigned long flags;
 
 	desc->completion->status = IDXD_COMP_DESC_ABORT;
 	/*
 	 * Grab the list lock so it will block the irq thread handler. This allows the
 	 * abort code to locate the descriptor need to be aborted.
 	 */
-	spin_lock_irqsave(&ie->list_lock, flags);
+	spin_lock(&ie->list_lock);
 	head = llist_del_all(&ie->pending_llist);
 	if (head) {
 		llist_for_each_entry_safe(d, t, head, llnode) {
@@ -135,7 +126,7 @@ static void llist_abort_desc(struct idxd_wq *wq, struct idxd_irq_entry *ie,
 
 	if (!found)
 		found = list_abort_desc(wq, ie, desc);
-	spin_unlock_irqrestore(&ie->list_lock, flags);
+	spin_unlock(&ie->list_lock);
 
 	if (found)
 		complete_desc(found, IDXD_COMPLETE_ABORT);
@@ -148,13 +139,17 @@ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc)
 	void __iomem *portal;
 	int rc;
 
-	if (idxd->state != IDXD_DEV_ENABLED)
+	if (idxd->state != IDXD_DEV_ENABLED) {
+		idxd_free_desc(wq, desc);
 		return -EIO;
+	}
 
-	if (!percpu_ref_tryget_live(&wq->wq_active))
+	if (!percpu_ref_tryget_live(&wq->wq_active)) {
+		idxd_free_desc(wq, desc);
 		return -ENXIO;
+	}
 
-	portal = wq->portal;
+	portal = idxd_wq_portal_addr(wq);
 
 	/*
 	 * The wmb() flushes writes to coherent DMA data before
@@ -168,7 +163,7 @@ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc)
 	 * that we designated the descriptor to.
 	 */
 	if (desc->hw->flags & IDXD_OP_FLAG_RCI) {
-		ie = &idxd->irq_entries[desc->vector];
+		ie = &idxd->irq_entries[wq->id + 1];
 		llist_add(&desc->llnode, &ie->pending_llist);
 	}
 
@@ -183,8 +178,12 @@ int idxd_submit_desc(struct idxd_wq *wq, struct idxd_desc *desc)
 		 */
 		rc = enqcmds(portal, desc->hw);
 		if (rc < 0) {
+			percpu_ref_put(&wq->wq_active);
+			/* abort operation frees the descriptor */
 			if (ie)
 				llist_abort_desc(wq, ie, desc);
+			else
+				idxd_free_desc(wq, desc);
 			return rc;
 		}
 	}
diff --git a/drivers/dma/idxd/sysfs.c b/drivers/dma/idxd/sysfs.c
index 26d8ff97d13d..a9025be940db 100644
--- a/drivers/dma/idxd/sysfs.c
+++ b/drivers/dma/idxd/sysfs.c
@@ -16,336 +16,11 @@ static char *idxd_wq_type_names[] = {
 	[IDXD_WQT_USER]		= "user",
 };
 
-static int idxd_config_bus_match(struct device *dev,
-				 struct device_driver *drv)
-{
-	int matched = 0;
-
-	if (is_idxd_dev(dev)) {
-		struct idxd_device *idxd = confdev_to_idxd(dev);
-
-		if (idxd->state != IDXD_DEV_CONF_READY)
-			return 0;
-		matched = 1;
-	} else if (is_idxd_wq_dev(dev)) {
-		struct idxd_wq *wq = confdev_to_wq(dev);
-		struct idxd_device *idxd = wq->idxd;
-
-		if (idxd->state < IDXD_DEV_CONF_READY)
-			return 0;
-
-		if (wq->state != IDXD_WQ_DISABLED) {
-			dev_dbg(dev, "%s not disabled\n", dev_name(dev));
-			return 0;
-		}
-		matched = 1;
-	}
-
-	if (matched)
-		dev_dbg(dev, "%s matched\n", dev_name(dev));
-
-	return matched;
-}
-
-static int enable_wq(struct idxd_wq *wq)
-{
-	struct idxd_device *idxd = wq->idxd;
-	struct device *dev = &idxd->pdev->dev;
-	unsigned long flags;
-	int rc;
-
-	mutex_lock(&wq->wq_lock);
-
-	if (idxd->state != IDXD_DEV_ENABLED) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "Enabling while device not enabled.\n");
-		return -EPERM;
-	}
-
-	if (wq->state != IDXD_WQ_DISABLED) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ %d already enabled.\n", wq->id);
-		return -EBUSY;
-	}
-
-	if (!wq->group) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ not attached to group.\n");
-		return -EINVAL;
-	}
-
-	if (strlen(wq->name) == 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ name not set.\n");
-		return -EINVAL;
-	}
-
-	/* Shared WQ checks */
-	if (wq_shared(wq)) {
-		if (!device_swq_supported(idxd)) {
-			dev_warn(dev, "PASID not enabled and shared WQ.\n");
-			mutex_unlock(&wq->wq_lock);
-			return -ENXIO;
-		}
-		/*
-		 * Shared wq with the threshold set to 0 means the user
-		 * did not set the threshold or transitioned from a
-		 * dedicated wq but did not set threshold. A value
-		 * of 0 would effectively disable the shared wq. The
-		 * driver does not allow a value of 0 to be set for
-		 * threshold via sysfs.
-		 */
-		if (wq->threshold == 0) {
-			dev_warn(dev, "Shared WQ and threshold 0.\n");
-			mutex_unlock(&wq->wq_lock);
-			return -EINVAL;
-		}
-	}
-
-	rc = idxd_wq_alloc_resources(wq);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ resource alloc failed\n");
-		return rc;
-	}
-
-	spin_lock_irqsave(&idxd->dev_lock, flags);
-	if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
-		rc = idxd_device_config(idxd);
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "Writing WQ %d config failed: %d\n", wq->id, rc);
-		return rc;
-	}
-
-	rc = idxd_wq_enable(wq);
-	if (rc < 0) {
-		mutex_unlock(&wq->wq_lock);
-		dev_warn(dev, "WQ %d enabling failed: %d\n", wq->id, rc);
-		return rc;
-	}
-
-	rc = idxd_wq_map_portal(wq);
-	if (rc < 0) {
-		dev_warn(dev, "wq portal mapping failed: %d\n", rc);
-		rc = idxd_wq_disable(wq);
-		if (rc < 0)
-			dev_warn(dev, "IDXD wq disable failed\n");
-		mutex_unlock(&wq->wq_lock);
-		return rc;
-	}
-
-	wq->client_count = 0;
-
-	if (wq->type == IDXD_WQT_KERNEL) {
-		rc = idxd_wq_init_percpu_ref(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "percpu_ref setup failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	}
-
-	if (is_idxd_wq_dmaengine(wq)) {
-		rc = idxd_register_dma_channel(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "DMA channel register failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	} else if (is_idxd_wq_cdev(wq)) {
-		rc = idxd_wq_add_cdev(wq);
-		if (rc < 0) {
-			dev_dbg(dev, "Cdev creation failed\n");
-			mutex_unlock(&wq->wq_lock);
-			return rc;
-		}
-	}
-
-	mutex_unlock(&wq->wq_lock);
-	dev_info(dev, "wq %s enabled\n", dev_name(&wq->conf_dev));
-
-	return 0;
-}
-
-static int idxd_config_bus_probe(struct device *dev)
-{
-	int rc = 0;
-	unsigned long flags;
-
-	dev_dbg(dev, "%s called\n", __func__);
-
-	if (is_idxd_dev(dev)) {
-		struct idxd_device *idxd = confdev_to_idxd(dev);
-
-		if (idxd->state != IDXD_DEV_CONF_READY) {
-			dev_warn(dev, "Device not ready for config\n");
-			return -EBUSY;
-		}
-
-		if (!try_module_get(THIS_MODULE))
-			return -ENXIO;
-
-		/* Perform IDXD configuration and enabling */
-		spin_lock_irqsave(&idxd->dev_lock, flags);
-		if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
-			rc = idxd_device_config(idxd);
-		spin_unlock_irqrestore(&idxd->dev_lock, flags);
-		if (rc < 0) {
-			module_put(THIS_MODULE);
-			dev_warn(dev, "Device config failed: %d\n", rc);
-			return rc;
-		}
-
-		/* start device */
-		rc = idxd_device_enable(idxd);
-		if (rc < 0) {
-			module_put(THIS_MODULE);
-			dev_warn(dev, "Device enable failed: %d\n", rc);
-			return rc;
-		}
-
-		dev_info(dev, "Device %s enabled\n", dev_name(dev));
-
-		rc = idxd_register_dma_device(idxd);
-		if (rc < 0) {
-			module_put(THIS_MODULE);
-			dev_dbg(dev, "Failed to register dmaengine device\n");
-			return rc;
-		}
-		return 0;
-	} else if (is_idxd_wq_dev(dev)) {
-		struct idxd_wq *wq = confdev_to_wq(dev);
-
-		return enable_wq(wq);
-	}
-
-	return -ENODEV;
-}
-
-static void disable_wq(struct idxd_wq *wq)
-{
-	struct idxd_device *idxd = wq->idxd;
-	struct device *dev = &idxd->pdev->dev;
-
-	mutex_lock(&wq->wq_lock);
-	dev_dbg(dev, "%s removing WQ %s\n", __func__, dev_name(&wq->conf_dev));
-	if (wq->state == IDXD_WQ_DISABLED) {
-		mutex_unlock(&wq->wq_lock);
-		return;
-	}
-
-	if (wq->type == IDXD_WQT_KERNEL)
-		idxd_wq_quiesce(wq);
-
-	if (is_idxd_wq_dmaengine(wq))
-		idxd_unregister_dma_channel(wq);
-	else if (is_idxd_wq_cdev(wq))
-		idxd_wq_del_cdev(wq);
-
-	if (idxd_wq_refcount(wq))
-		dev_warn(dev, "Clients has claim on wq %d: %d\n",
-			 wq->id, idxd_wq_refcount(wq));
-
-	idxd_wq_unmap_portal(wq);
-
-	idxd_wq_drain(wq);
-	idxd_wq_reset(wq);
-
-	idxd_wq_free_resources(wq);
-	wq->client_count = 0;
-	mutex_unlock(&wq->wq_lock);
-
-	dev_info(dev, "wq %s disabled\n", dev_name(&wq->conf_dev));
-}
-
-static void idxd_config_bus_remove(struct device *dev)
-{
-	int rc;
-
-	dev_dbg(dev, "%s called for %s\n", __func__, dev_name(dev));
-
-	/* disable workqueue here */
-	if (is_idxd_wq_dev(dev)) {
-		struct idxd_wq *wq = confdev_to_wq(dev);
-
-		disable_wq(wq);
-	} else if (is_idxd_dev(dev)) {
-		struct idxd_device *idxd = confdev_to_idxd(dev);
-		int i;
-
-		dev_dbg(dev, "%s removing dev %s\n", __func__,
-			dev_name(&idxd->conf_dev));
-		for (i = 0; i < idxd->max_wqs; i++) {
-			struct idxd_wq *wq = idxd->wqs[i];
-
-			if (wq->state == IDXD_WQ_DISABLED)
-				continue;
-			dev_warn(dev, "Active wq %d on disable %s.\n", i,
-				 dev_name(&idxd->conf_dev));
-			device_release_driver(&wq->conf_dev);
-		}
-
-		idxd_unregister_dma_device(idxd);
-		rc = idxd_device_disable(idxd);
-		if (test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags)) {
-			for (i = 0; i < idxd->max_wqs; i++) {
-				struct idxd_wq *wq = idxd->wqs[i];
-
-				mutex_lock(&wq->wq_lock);
-				idxd_wq_disable_cleanup(wq);
-				mutex_unlock(&wq->wq_lock);
-			}
-		}
-		module_put(THIS_MODULE);
-		if (rc < 0)
-			dev_warn(dev, "Device disable failed\n");
-		else
-			dev_info(dev, "Device %s disabled\n", dev_name(dev));
-
-	}
-}
-
-static void idxd_config_bus_shutdown(struct device *dev)
-{
-	dev_dbg(dev, "%s called\n", __func__);
-}
-
-struct bus_type dsa_bus_type = {
-	.name = "dsa",
-	.match = idxd_config_bus_match,
-	.probe = idxd_config_bus_probe,
-	.remove = idxd_config_bus_remove,
-	.shutdown = idxd_config_bus_shutdown,
-};
-
-static struct idxd_device_driver dsa_drv = {
-	.drv = {
-		.name = "dsa",
-		.bus = &dsa_bus_type,
-		.owner = THIS_MODULE,
-		.mod_name = KBUILD_MODNAME,
-	},
-};
-
-/* IDXD generic driver setup */
-int idxd_register_driver(void)
-{
-	return driver_register(&dsa_drv.drv);
-}
-
-void idxd_unregister_driver(void)
-{
-	driver_unregister(&dsa_drv.drv);
-}
-
 /* IDXD engine attributes */
 static ssize_t engine_group_id_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
-	struct idxd_engine *engine =
-		container_of(dev, struct idxd_engine, conf_dev);
+	struct idxd_engine *engine = confdev_to_engine(dev);
 
 	if (engine->group)
 		return sysfs_emit(buf, "%d\n", engine->group->id);
@@ -357,8 +32,7 @@ static ssize_t engine_group_id_store(struct device *dev,
 				     struct device_attribute *attr,
 				     const char *buf, size_t count)
 {
-	struct idxd_engine *engine =
-		container_of(dev, struct idxd_engine, conf_dev);
+	struct idxd_engine *engine = confdev_to_engine(dev);
 	struct idxd_device *idxd = engine->idxd;
 	long id;
 	int rc;
@@ -412,7 +86,7 @@ static const struct attribute_group *idxd_engine_attribute_groups[] = {
 
 static void idxd_conf_engine_release(struct device *dev)
 {
-	struct idxd_engine *engine = container_of(dev, struct idxd_engine, conf_dev);
+	struct idxd_engine *engine = confdev_to_engine(dev);
 
 	kfree(engine);
 }
@@ -442,8 +116,7 @@ static ssize_t group_tokens_reserved_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	return sysfs_emit(buf, "%u\n", group->tokens_reserved);
 }
@@ -452,8 +125,7 @@ static ssize_t group_tokens_reserved_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	struct idxd_device *idxd = group->idxd;
 	unsigned long val;
 	int rc;
@@ -490,8 +162,7 @@ static ssize_t group_tokens_allowed_show(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	return sysfs_emit(buf, "%u\n", group->tokens_allowed);
 }
@@ -500,8 +171,7 @@ static ssize_t group_tokens_allowed_store(struct device *dev,
 					  struct device_attribute *attr,
 					  const char *buf, size_t count)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	struct idxd_device *idxd = group->idxd;
 	unsigned long val;
 	int rc;
@@ -535,8 +205,7 @@ static ssize_t group_use_token_limit_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	return sysfs_emit(buf, "%u\n", group->use_token_limit);
 }
@@ -545,8 +214,7 @@ static ssize_t group_use_token_limit_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	struct idxd_device *idxd = group->idxd;
 	unsigned long val;
 	int rc;
@@ -578,8 +246,7 @@ static struct device_attribute dev_attr_group_use_token_limit =
 static ssize_t group_engines_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	int i, rc = 0;
 	struct idxd_device *idxd = group->idxd;
 
@@ -607,8 +274,7 @@ static struct device_attribute dev_attr_group_engines =
 static ssize_t group_work_queues_show(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	int i, rc = 0;
 	struct idxd_device *idxd = group->idxd;
 
@@ -637,8 +303,7 @@ static ssize_t group_traffic_class_a_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	return sysfs_emit(buf, "%d\n", group->tc_a);
 }
@@ -647,8 +312,7 @@ static ssize_t group_traffic_class_a_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	struct idxd_device *idxd = group->idxd;
 	long val;
 	int rc;
@@ -663,6 +327,9 @@ static ssize_t group_traffic_class_a_store(struct device *dev,
 	if (idxd->state == IDXD_DEV_ENABLED)
 		return -EPERM;
 
+	if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override)
+		return -EPERM;
+
 	if (val < 0 || val > 7)
 		return -EINVAL;
 
@@ -678,8 +345,7 @@ static ssize_t group_traffic_class_b_show(struct device *dev,
 					  struct device_attribute *attr,
 					  char *buf)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	return sysfs_emit(buf, "%d\n", group->tc_b);
 }
@@ -688,8 +354,7 @@ static ssize_t group_traffic_class_b_store(struct device *dev,
 					   struct device_attribute *attr,
 					   const char *buf, size_t count)
 {
-	struct idxd_group *group =
-		container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 	struct idxd_device *idxd = group->idxd;
 	long val;
 	int rc;
@@ -704,6 +369,9 @@ static ssize_t group_traffic_class_b_store(struct device *dev,
 	if (idxd->state == IDXD_DEV_ENABLED)
 		return -EPERM;
 
+	if (idxd->hw.version < DEVICE_VERSION_2 && !tc_override)
+		return -EPERM;
+
 	if (val < 0 || val > 7)
 		return -EINVAL;
 
@@ -737,7 +405,7 @@ static const struct attribute_group *idxd_group_attribute_groups[] = {
 
 static void idxd_conf_group_release(struct device *dev)
 {
-	struct idxd_group *group = container_of(dev, struct idxd_group, conf_dev);
+	struct idxd_group *group = confdev_to_group(dev);
 
 	kfree(group);
 }
@@ -752,7 +420,7 @@ struct device_type idxd_group_device_type = {
 static ssize_t wq_clients_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%d\n", wq->client_count);
 }
@@ -763,7 +431,7 @@ static struct device_attribute dev_attr_wq_clients =
 static ssize_t wq_state_show(struct device *dev,
 			     struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	switch (wq->state) {
 	case IDXD_WQ_DISABLED:
@@ -781,7 +449,7 @@ static struct device_attribute dev_attr_wq_state =
 static ssize_t wq_group_id_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	if (wq->group)
 		return sysfs_emit(buf, "%u\n", wq->group->id);
@@ -793,7 +461,7 @@ static ssize_t wq_group_id_store(struct device *dev,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	long id;
 	int rc;
@@ -836,7 +504,7 @@ static struct device_attribute dev_attr_wq_group_id =
 static ssize_t wq_mode_show(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%s\n", wq_dedicated(wq) ? "dedicated" : "shared");
 }
@@ -845,7 +513,7 @@ static ssize_t wq_mode_store(struct device *dev,
 			     struct device_attribute *attr, const char *buf,
 			     size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 
 	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
@@ -872,7 +540,7 @@ static struct device_attribute dev_attr_wq_mode =
 static ssize_t wq_size_show(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", wq->size);
 }
@@ -895,7 +563,7 @@ static ssize_t wq_size_store(struct device *dev,
 			     struct device_attribute *attr, const char *buf,
 			     size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	unsigned long size;
 	struct idxd_device *idxd = wq->idxd;
 	int rc;
@@ -923,7 +591,7 @@ static struct device_attribute dev_attr_wq_size =
 static ssize_t wq_priority_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", wq->priority);
 }
@@ -932,7 +600,7 @@ static ssize_t wq_priority_store(struct device *dev,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	unsigned long prio;
 	struct idxd_device *idxd = wq->idxd;
 	int rc;
@@ -960,7 +628,7 @@ static struct device_attribute dev_attr_wq_priority =
 static ssize_t wq_block_on_fault_show(struct device *dev,
 				      struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", test_bit(WQ_FLAG_BLOCK_ON_FAULT, &wq->flags));
 }
@@ -969,11 +637,14 @@ static ssize_t wq_block_on_fault_store(struct device *dev,
 				       struct device_attribute *attr,
 				       const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	bool bof;
 	int rc;
 
+	if (!idxd->hw.gen_cap.block_on_fault)
+		return -EOPNOTSUPP;
+
 	if (!test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags))
 		return -EPERM;
 
@@ -999,7 +670,7 @@ static struct device_attribute dev_attr_wq_block_on_fault =
 static ssize_t wq_threshold_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", wq->threshold);
 }
@@ -1008,7 +679,7 @@ static ssize_t wq_threshold_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	unsigned int val;
 	int rc;
@@ -1040,7 +711,7 @@ static struct device_attribute dev_attr_wq_threshold =
 static ssize_t wq_type_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	switch (wq->type) {
 	case IDXD_WQT_KERNEL:
@@ -1059,7 +730,7 @@ static ssize_t wq_type_store(struct device *dev,
 			     struct device_attribute *attr, const char *buf,
 			     size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	enum idxd_wq_type old_type;
 
 	if (wq->state != IDXD_WQ_DISABLED)
@@ -1088,7 +759,7 @@ static struct device_attribute dev_attr_wq_type =
 static ssize_t wq_name_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%s\n", wq->name);
 }
@@ -1097,7 +768,7 @@ static ssize_t wq_name_store(struct device *dev,
 			     struct device_attribute *attr, const char *buf,
 			     size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	if (wq->state != IDXD_WQ_DISABLED)
 		return -EPERM;
@@ -1124,7 +795,7 @@ static struct device_attribute dev_attr_wq_name =
 static ssize_t wq_cdev_minor_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	int minor = -1;
 
 	mutex_lock(&wq->wq_lock);
@@ -1158,7 +829,7 @@ static int __get_sysfs_u64(const char *buf, u64 *val)
 static ssize_t wq_max_transfer_size_show(struct device *dev, struct device_attribute *attr,
 					 char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%llu\n", wq->max_xfer_bytes);
 }
@@ -1166,7 +837,7 @@ static ssize_t wq_max_transfer_size_show(struct device *dev, struct device_attri
 static ssize_t wq_max_transfer_size_store(struct device *dev, struct device_attribute *attr,
 					  const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	u64 xfer_size;
 	int rc;
@@ -1192,7 +863,7 @@ static struct device_attribute dev_attr_wq_max_transfer_size =
 
 static ssize_t wq_max_batch_size_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", wq->max_batch_size);
 }
@@ -1200,7 +871,7 @@ static ssize_t wq_max_batch_size_show(struct device *dev, struct device_attribut
 static ssize_t wq_max_batch_size_store(struct device *dev, struct device_attribute *attr,
 				       const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	u64 batch_size;
 	int rc;
@@ -1225,7 +896,7 @@ static struct device_attribute dev_attr_wq_max_batch_size =
 
 static ssize_t wq_ats_disable_show(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	return sysfs_emit(buf, "%u\n", wq->ats_dis);
 }
@@ -1233,7 +904,7 @@ static ssize_t wq_ats_disable_show(struct device *dev, struct device_attribute *
 static ssize_t wq_ats_disable_store(struct device *dev, struct device_attribute *attr,
 				    const char *buf, size_t count)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 	struct idxd_device *idxd = wq->idxd;
 	bool ats_dis;
 	int rc;
@@ -1256,6 +927,24 @@ static ssize_t wq_ats_disable_store(struct device *dev, struct device_attribute
 static struct device_attribute dev_attr_wq_ats_disable =
 		__ATTR(ats_disable, 0644, wq_ats_disable_show, wq_ats_disable_store);
 
+static ssize_t wq_occupancy_show(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	struct idxd_wq *wq = confdev_to_wq(dev);
+	struct idxd_device *idxd = wq->idxd;
+	u32 occup, offset;
+
+	if (!idxd->hw.wq_cap.occupancy)
+		return -EOPNOTSUPP;
+
+	offset = WQCFG_OFFSET(idxd, wq->id, WQCFG_OCCUP_IDX);
+	occup = ioread32(idxd->reg_base + offset) & WQCFG_OCCUP_MASK;
+
+	return sysfs_emit(buf, "%u\n", occup);
+}
+
+static struct device_attribute dev_attr_wq_occupancy =
+		__ATTR(occupancy, 0444, wq_occupancy_show, NULL);
+
 static struct attribute *idxd_wq_attributes[] = {
 	&dev_attr_wq_clients.attr,
 	&dev_attr_wq_state.attr,
@@ -1271,6 +960,7 @@ static struct attribute *idxd_wq_attributes[] = {
 	&dev_attr_wq_max_transfer_size.attr,
 	&dev_attr_wq_max_batch_size.attr,
 	&dev_attr_wq_ats_disable.attr,
+	&dev_attr_wq_occupancy.attr,
 	NULL,
 };
 
@@ -1285,7 +975,7 @@ static const struct attribute_group *idxd_wq_attribute_groups[] = {
 
 static void idxd_conf_wq_release(struct device *dev)
 {
-	struct idxd_wq *wq = container_of(dev, struct idxd_wq, conf_dev);
+	struct idxd_wq *wq = confdev_to_wq(dev);
 
 	kfree(wq->wqcfg);
 	kfree(wq);
@@ -1301,8 +991,7 @@ struct device_type idxd_wq_device_type = {
 static ssize_t version_show(struct device *dev, struct device_attribute *attr,
 			    char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%#x\n", idxd->hw.version);
 }
@@ -1312,8 +1001,7 @@ static ssize_t max_work_queues_size_show(struct device *dev,
 					 struct device_attribute *attr,
 					 char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_wq_size);
 }
@@ -1322,8 +1010,7 @@ static DEVICE_ATTR_RO(max_work_queues_size);
 static ssize_t max_groups_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_groups);
 }
@@ -1332,8 +1019,7 @@ static DEVICE_ATTR_RO(max_groups);
 static ssize_t max_work_queues_show(struct device *dev,
 				    struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_wqs);
 }
@@ -1342,8 +1028,7 @@ static DEVICE_ATTR_RO(max_work_queues);
 static ssize_t max_engines_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_engines);
 }
@@ -1352,8 +1037,7 @@ static DEVICE_ATTR_RO(max_engines);
 static ssize_t numa_node_show(struct device *dev,
 			      struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%d\n", dev_to_node(&idxd->pdev->dev));
 }
@@ -1362,8 +1046,7 @@ static DEVICE_ATTR_RO(numa_node);
 static ssize_t max_batch_size_show(struct device *dev,
 				   struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_batch_size);
 }
@@ -1373,8 +1056,7 @@ static ssize_t max_transfer_size_show(struct device *dev,
 				      struct device_attribute *attr,
 				      char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%llu\n", idxd->max_xfer_bytes);
 }
@@ -1383,8 +1065,7 @@ static DEVICE_ATTR_RO(max_transfer_size);
 static ssize_t op_cap_show(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 	int i, rc = 0;
 
 	for (i = 0; i < 4; i++)
@@ -1399,8 +1080,7 @@ static DEVICE_ATTR_RO(op_cap);
 static ssize_t gen_cap_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%#llx\n", idxd->hw.gen_cap.bits);
 }
@@ -1409,8 +1089,7 @@ static DEVICE_ATTR_RO(gen_cap);
 static ssize_t configurable_show(struct device *dev,
 				 struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", test_bit(IDXD_FLAG_CONFIGURABLE, &idxd->flags));
 }
@@ -1419,18 +1098,16 @@ static DEVICE_ATTR_RO(configurable);
 static ssize_t clients_show(struct device *dev,
 			    struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
-	unsigned long flags;
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 	int count = 0, i;
 
-	spin_lock_irqsave(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
 	for (i = 0; i < idxd->max_wqs; i++) {
 		struct idxd_wq *wq = idxd->wqs[i];
 
 		count += wq->client_count;
 	}
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_unlock(&idxd->dev_lock);
 
 	return sysfs_emit(buf, "%d\n", count);
 }
@@ -1439,8 +1116,7 @@ static DEVICE_ATTR_RO(clients);
 static ssize_t pasid_enabled_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", device_pasid_enabled(idxd));
 }
@@ -1449,12 +1125,10 @@ static DEVICE_ATTR_RO(pasid_enabled);
 static ssize_t state_show(struct device *dev,
 			  struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	switch (idxd->state) {
 	case IDXD_DEV_DISABLED:
-	case IDXD_DEV_CONF_READY:
 		return sysfs_emit(buf, "disabled\n");
 	case IDXD_DEV_ENABLED:
 		return sysfs_emit(buf, "enabled\n");
@@ -1469,15 +1143,13 @@ static DEVICE_ATTR_RO(state);
 static ssize_t errors_show(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 	int i, out = 0;
-	unsigned long flags;
 
-	spin_lock_irqsave(&idxd->dev_lock, flags);
+	spin_lock(&idxd->dev_lock);
 	for (i = 0; i < 4; i++)
 		out += sysfs_emit_at(buf, out, "%#018llx ", idxd->sw_err.bits[i]);
-	spin_unlock_irqrestore(&idxd->dev_lock, flags);
+	spin_unlock(&idxd->dev_lock);
 	out--;
 	out += sysfs_emit_at(buf, out, "\n");
 	return out;
@@ -1487,8 +1159,7 @@ static DEVICE_ATTR_RO(errors);
 static ssize_t max_tokens_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->max_tokens);
 }
@@ -1497,8 +1168,7 @@ static DEVICE_ATTR_RO(max_tokens);
 static ssize_t token_limit_show(struct device *dev,
 				struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->token_limit);
 }
@@ -1507,8 +1177,7 @@ static ssize_t token_limit_store(struct device *dev,
 				 struct device_attribute *attr,
 				 const char *buf, size_t count)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 	unsigned long val;
 	int rc;
 
@@ -1536,8 +1205,7 @@ static DEVICE_ATTR_RW(token_limit);
 static ssize_t cdev_major_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd =
-		container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%u\n", idxd->major);
 }
@@ -1546,11 +1214,20 @@ static DEVICE_ATTR_RO(cdev_major);
 static ssize_t cmd_status_show(struct device *dev,
 			       struct device_attribute *attr, char *buf)
 {
-	struct idxd_device *idxd = container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	return sysfs_emit(buf, "%#x\n", idxd->cmd_status);
 }
-static DEVICE_ATTR_RO(cmd_status);
+
+static ssize_t cmd_status_store(struct device *dev, struct device_attribute *attr,
+				const char *buf, size_t count)
+{
+	struct idxd_device *idxd = confdev_to_idxd(dev);
+
+	idxd->cmd_status = 0;
+	return count;
+}
+static DEVICE_ATTR_RW(cmd_status);
 
 static struct attribute *idxd_device_attributes[] = {
 	&dev_attr_version.attr,
@@ -1586,7 +1263,7 @@ static const struct attribute_group *idxd_attribute_groups[] = {
 
 static void idxd_conf_device_release(struct device *dev)
 {
-	struct idxd_device *idxd = container_of(dev, struct idxd_device, conf_dev);
+	struct idxd_device *idxd = confdev_to_idxd(dev);
 
 	kfree(idxd->groups);
 	kfree(idxd->wqs);
@@ -1611,12 +1288,12 @@ struct device_type iax_device_type = {
 
 static int idxd_register_engine_devices(struct idxd_device *idxd)
 {
+	struct idxd_engine *engine;
 	int i, j, rc;
 
 	for (i = 0; i < idxd->max_engines; i++) {
-		struct idxd_engine *engine = idxd->engines[i];
-
-		rc = device_add(&engine->conf_dev);
+		engine = idxd->engines[i];
+		rc = device_add(engine_confdev(engine));
 		if (rc < 0)
 			goto cleanup;
 	}
@@ -1625,22 +1302,26 @@ static int idxd_register_engine_devices(struct idxd_device *idxd)
 
 cleanup:
 	j = i - 1;
-	for (; i < idxd->max_engines; i++)
-		put_device(&idxd->engines[i]->conf_dev);
+	for (; i < idxd->max_engines; i++) {
+		engine = idxd->engines[i];
+		put_device(engine_confdev(engine));
+	}
 
-	while (j--)
-		device_unregister(&idxd->engines[j]->conf_dev);
+	while (j--) {
+		engine = idxd->engines[j];
+		device_unregister(engine_confdev(engine));
+	}
 	return rc;
 }
 
 static int idxd_register_group_devices(struct idxd_device *idxd)
 {
+	struct idxd_group *group;
 	int i, j, rc;
 
 	for (i = 0; i < idxd->max_groups; i++) {
-		struct idxd_group *group = idxd->groups[i];
-
-		rc = device_add(&group->conf_dev);
+		group = idxd->groups[i];
+		rc = device_add(group_confdev(group));
 		if (rc < 0)
 			goto cleanup;
 	}
@@ -1649,22 +1330,26 @@ static int idxd_register_group_devices(struct idxd_device *idxd)
 
 cleanup:
 	j = i - 1;
-	for (; i < idxd->max_groups; i++)
-		put_device(&idxd->groups[i]->conf_dev);
+	for (; i < idxd->max_groups; i++) {
+		group = idxd->groups[i];
+		put_device(group_confdev(group));
+	}
 
-	while (j--)
-		device_unregister(&idxd->groups[j]->conf_dev);
+	while (j--) {
+		group = idxd->groups[j];
+		device_unregister(group_confdev(group));
+	}
 	return rc;
 }
 
 static int idxd_register_wq_devices(struct idxd_device *idxd)
 {
+	struct idxd_wq *wq;
 	int i, rc, j;
 
 	for (i = 0; i < idxd->max_wqs; i++) {
-		struct idxd_wq *wq = idxd->wqs[i];
-
-		rc = device_add(&wq->conf_dev);
+		wq = idxd->wqs[i];
+		rc = device_add(wq_confdev(wq));
 		if (rc < 0)
 			goto cleanup;
 	}
@@ -1673,11 +1358,15 @@ static int idxd_register_wq_devices(struct idxd_device *idxd)
 
 cleanup:
 	j = i - 1;
-	for (; i < idxd->max_wqs; i++)
-		put_device(&idxd->wqs[i]->conf_dev);
+	for (; i < idxd->max_wqs; i++) {
+		wq = idxd->wqs[i];
+		put_device(wq_confdev(wq));
+	}
 
-	while (j--)
-		device_unregister(&idxd->wqs[j]->conf_dev);
+	while (j--) {
+		wq = idxd->wqs[j];
+		device_unregister(wq_confdev(wq));
+	}
 	return rc;
 }
 
@@ -1686,7 +1375,7 @@ int idxd_register_devices(struct idxd_device *idxd)
 	struct device *dev = &idxd->pdev->dev;
 	int rc, i;
 
-	rc = device_add(&idxd->conf_dev);
+	rc = device_add(idxd_confdev(idxd));
 	if (rc < 0)
 		return rc;
 
@@ -1712,12 +1401,12 @@ int idxd_register_devices(struct idxd_device *idxd)
 
  err_group:
 	for (i = 0; i < idxd->max_engines; i++)
-		device_unregister(&idxd->engines[i]->conf_dev);
+		device_unregister(engine_confdev(idxd->engines[i]));
  err_engine:
 	for (i = 0; i < idxd->max_wqs; i++)
-		device_unregister(&idxd->wqs[i]->conf_dev);
+		device_unregister(wq_confdev(idxd->wqs[i]));
  err_wq:
-	device_del(&idxd->conf_dev);
+	device_del(idxd_confdev(idxd));
 	return rc;
 }
 
@@ -1728,19 +1417,19 @@ void idxd_unregister_devices(struct idxd_device *idxd)
 	for (i = 0; i < idxd->max_wqs; i++) {
 		struct idxd_wq *wq = idxd->wqs[i];
 
-		device_unregister(&wq->conf_dev);
+		device_unregister(wq_confdev(wq));
 	}
 
 	for (i = 0; i < idxd->max_engines; i++) {
 		struct idxd_engine *engine = idxd->engines[i];
 
-		device_unregister(&engine->conf_dev);
+		device_unregister(engine_confdev(engine));
 	}
 
 	for (i = 0; i < idxd->max_groups; i++) {
 		struct idxd_group *group = idxd->groups[i];
 
-		device_unregister(&group->conf_dev);
+		device_unregister(group_confdev(group));
 	}
 }
 
diff --git a/drivers/dma/ppc4xx/adma.c b/drivers/dma/ppc4xx/adma.c
index df7704053d91..e2b5129c5f84 100644
--- a/drivers/dma/ppc4xx/adma.c
+++ b/drivers/dma/ppc4xx/adma.c
@@ -4319,6 +4319,7 @@ static ssize_t enable_store(struct device_driver *dev, const char *buf,
 			    size_t count)
 {
 	unsigned long val;
+	int err;
 
 	if (!count || count > 11)
 		return -EINVAL;
@@ -4327,7 +4328,10 @@ static ssize_t enable_store(struct device_driver *dev, const char *buf,
 		return -EFAULT;
 
 	/* Write a key */
-	sscanf(buf, "%lx", &val);
+	err = kstrtoul(buf, 16, &val);
+	if (err)
+		return err;
+
 	dcr_write(ppc440spe_mq_dcr_host, DCRN_MQ0_XORBA, val);
 	isync();
 
@@ -4368,7 +4372,7 @@ static ssize_t poly_store(struct device_driver *dev, const char *buf,
 			  size_t count)
 {
 	unsigned long reg, val;
-
+	int err;
 #ifdef CONFIG_440SP
 	/* 440SP uses default 0x14D polynomial only */
 	return -EINVAL;
@@ -4378,7 +4382,9 @@ static ssize_t poly_store(struct device_driver *dev, const char *buf,
 		return -EINVAL;
 
 	/* e.g., 0x14D or 0x11D */
-	sscanf(buf, "%lx", &val);
+	err = kstrtoul(buf, 16, &val);
+	if (err)
+		return err;
 
 	if (val & ~0x1FF)
 		return -EINVAL;
diff --git a/drivers/dma/ptdma/Kconfig b/drivers/dma/ptdma/Kconfig
new file mode 100644
index 000000000000..b430edd709f9
--- /dev/null
+++ b/drivers/dma/ptdma/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config AMD_PTDMA
+	tristate  "AMD PassThru DMA Engine"
+	depends on X86_64 && PCI
+	select DMA_ENGINE
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  Enable support for the AMD PTDMA controller. This controller
+	  provides DMA capabilities to perform high bandwidth memory to
+	  memory and IO copy operations. It performs DMA transfer through
+	  queue-based descriptor management. This DMA controller is intended
+	  to be used with AMD Non-Transparent Bridge devices and not for
+	  general purpose peripheral DMA.
diff --git a/drivers/dma/ptdma/Makefile b/drivers/dma/ptdma/Makefile
new file mode 100644
index 000000000000..ce5410268a9a
--- /dev/null
+++ b/drivers/dma/ptdma/Makefile
@@ -0,0 +1,10 @@
+# SPDX-License-Identifier: GPL-2.0-only
+#
+# AMD Passthru DMA driver
+#
+
+obj-$(CONFIG_AMD_PTDMA) += ptdma.o
+
+ptdma-objs := ptdma-dev.o ptdma-dmaengine.o ptdma-debugfs.o
+
+ptdma-$(CONFIG_PCI) += ptdma-pci.o
diff --git a/drivers/dma/ptdma/ptdma-debugfs.c b/drivers/dma/ptdma/ptdma-debugfs.c
new file mode 100644
index 000000000000..c8307d3044a3
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-debugfs.c
@@ -0,0 +1,106 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthrough DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#include <linux/debugfs.h>
+#include <linux/seq_file.h>
+
+#include "ptdma.h"
+
+/* DebugFS helpers */
+#define	RI_VERSION_NUM	0x0000003F
+
+#define	RI_NUM_VQM	0x00078000
+#define	RI_NVQM_SHIFT	15
+
+static int pt_debugfs_info_show(struct seq_file *s, void *p)
+{
+	struct pt_device *pt = s->private;
+	unsigned int regval;
+
+	seq_printf(s, "Device name: %s\n", dev_name(pt->dev));
+	seq_printf(s, "   # Queues: %d\n", 1);
+	seq_printf(s, "     # Cmds: %d\n", pt->cmd_count);
+
+	regval = ioread32(pt->io_regs + CMD_PT_VERSION);
+
+	seq_printf(s, "    Version: %d\n", regval & RI_VERSION_NUM);
+	seq_puts(s, "    Engines:");
+	seq_puts(s, "\n");
+	seq_printf(s, "     Queues: %d\n", (regval & RI_NUM_VQM) >> RI_NVQM_SHIFT);
+
+	return 0;
+}
+
+/*
+ * Return a formatted buffer containing the current
+ * statistics of queue for PTDMA
+ */
+static int pt_debugfs_stats_show(struct seq_file *s, void *p)
+{
+	struct pt_device *pt = s->private;
+
+	seq_printf(s, "Total Interrupts Handled: %ld\n", pt->total_interrupts);
+
+	return 0;
+}
+
+static int pt_debugfs_queue_show(struct seq_file *s, void *p)
+{
+	struct pt_cmd_queue *cmd_q = s->private;
+	unsigned int regval;
+
+	if (!cmd_q)
+		return 0;
+
+	seq_printf(s, "               Pass-Thru: %ld\n", cmd_q->total_pt_ops);
+
+	regval = ioread32(cmd_q->reg_control + 0x000C);
+
+	seq_puts(s, "      Enabled Interrupts:");
+	if (regval & INT_EMPTY_QUEUE)
+		seq_puts(s, " EMPTY");
+	if (regval & INT_QUEUE_STOPPED)
+		seq_puts(s, " STOPPED");
+	if (regval & INT_ERROR)
+		seq_puts(s, " ERROR");
+	if (regval & INT_COMPLETION)
+		seq_puts(s, " COMPLETION");
+	seq_puts(s, "\n");
+
+	return 0;
+}
+
+DEFINE_SHOW_ATTRIBUTE(pt_debugfs_info);
+DEFINE_SHOW_ATTRIBUTE(pt_debugfs_queue);
+DEFINE_SHOW_ATTRIBUTE(pt_debugfs_stats);
+
+void ptdma_debugfs_setup(struct pt_device *pt)
+{
+	struct pt_cmd_queue *cmd_q;
+	struct dentry *debugfs_q_instance;
+
+	if (!debugfs_initialized())
+		return;
+
+	debugfs_create_file("info", 0400, pt->dma_dev.dbg_dev_root, pt,
+			    &pt_debugfs_info_fops);
+
+	debugfs_create_file("stats", 0400, pt->dma_dev.dbg_dev_root, pt,
+			    &pt_debugfs_stats_fops);
+
+	cmd_q = &pt->cmd_q;
+
+	debugfs_q_instance =
+		debugfs_create_dir("q", pt->dma_dev.dbg_dev_root);
+
+	debugfs_create_file("stats", 0400, debugfs_q_instance, cmd_q,
+			    &pt_debugfs_queue_fops);
+}
diff --git a/drivers/dma/ptdma/ptdma-dev.c b/drivers/dma/ptdma/ptdma-dev.c
new file mode 100644
index 000000000000..8a6bf291a73f
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-dev.c
@@ -0,0 +1,305 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#include <linux/bitfield.h>
+#include <linux/dma-mapping.h>
+#include <linux/debugfs.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "ptdma.h"
+
+/* Human-readable error strings */
+static char *pt_error_codes[] = {
+	"",
+	"ERR 01: ILLEGAL_ENGINE",
+	"ERR 03: ILLEGAL_FUNCTION_TYPE",
+	"ERR 04: ILLEGAL_FUNCTION_MODE",
+	"ERR 06: ILLEGAL_FUNCTION_SIZE",
+	"ERR 08: ILLEGAL_FUNCTION_RSVD",
+	"ERR 09: ILLEGAL_BUFFER_LENGTH",
+	"ERR 10: VLSB_FAULT",
+	"ERR 11: ILLEGAL_MEM_ADDR",
+	"ERR 12: ILLEGAL_MEM_SEL",
+	"ERR 13: ILLEGAL_CONTEXT_ID",
+	"ERR 15: 0xF Reserved",
+	"ERR 18: CMD_TIMEOUT",
+	"ERR 19: IDMA0_AXI_SLVERR",
+	"ERR 20: IDMA0_AXI_DECERR",
+	"ERR 21: 0x15 Reserved",
+	"ERR 22: IDMA1_AXI_SLAVE_FAULT",
+	"ERR 23: IDMA1_AIXI_DECERR",
+	"ERR 24: 0x18 Reserved",
+	"ERR 27: 0x1B Reserved",
+	"ERR 38: ODMA0_AXI_SLVERR",
+	"ERR 39: ODMA0_AXI_DECERR",
+	"ERR 40: 0x28 Reserved",
+	"ERR 41: ODMA1_AXI_SLVERR",
+	"ERR 42: ODMA1_AXI_DECERR",
+	"ERR 43: LSB_PARITY_ERR",
+};
+
+static void pt_log_error(struct pt_device *d, int e)
+{
+	dev_err(d->dev, "PTDMA error: %s (0x%x)\n", pt_error_codes[e], e);
+}
+
+void pt_start_queue(struct pt_cmd_queue *cmd_q)
+{
+	/* Turn on the run bit */
+	iowrite32(cmd_q->qcontrol | CMD_Q_RUN, cmd_q->reg_control);
+}
+
+void pt_stop_queue(struct pt_cmd_queue *cmd_q)
+{
+	/* Turn off the run bit */
+	iowrite32(cmd_q->qcontrol & ~CMD_Q_RUN, cmd_q->reg_control);
+}
+
+static int pt_core_execute_cmd(struct ptdma_desc *desc, struct pt_cmd_queue *cmd_q)
+{
+	bool soc = FIELD_GET(DWORD0_SOC, desc->dw0);
+	u8 *q_desc = (u8 *)&cmd_q->qbase[cmd_q->qidx];
+	u32 tail;
+
+	if (soc) {
+		desc->dw0 |= FIELD_PREP(DWORD0_IOC, desc->dw0);
+		desc->dw0 &= ~DWORD0_SOC;
+	}
+	mutex_lock(&cmd_q->q_mutex);
+
+	/* Copy 32-byte command descriptor to hw queue. */
+	memcpy(q_desc, desc, 32);
+	cmd_q->qidx = (cmd_q->qidx + 1) % CMD_Q_LEN;
+
+	/* The data used by this command must be flushed to memory */
+	wmb();
+
+	/* Write the new tail address back to the queue register */
+	tail = lower_32_bits(cmd_q->qdma_tail + cmd_q->qidx * Q_DESC_SIZE);
+	iowrite32(tail, cmd_q->reg_control + 0x0004);
+
+	/* Turn the queue back on using our cached control register */
+	pt_start_queue(cmd_q);
+	mutex_unlock(&cmd_q->q_mutex);
+
+	return 0;
+}
+
+int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
+			     struct pt_passthru_engine *pt_engine)
+{
+	struct ptdma_desc desc;
+
+	cmd_q->cmd_error = 0;
+	cmd_q->total_pt_ops++;
+	memset(&desc, 0, sizeof(desc));
+	desc.dw0 = CMD_DESC_DW0_VAL;
+	desc.length = pt_engine->src_len;
+	desc.src_lo = lower_32_bits(pt_engine->src_dma);
+	desc.dw3.src_hi = upper_32_bits(pt_engine->src_dma);
+	desc.dst_lo = lower_32_bits(pt_engine->dst_dma);
+	desc.dw5.dst_hi = upper_32_bits(pt_engine->dst_dma);
+
+	return pt_core_execute_cmd(&desc, cmd_q);
+}
+
+static inline void pt_core_disable_queue_interrupts(struct pt_device *pt)
+{
+	iowrite32(0, pt->cmd_q.reg_control + 0x000C);
+}
+
+static inline void pt_core_enable_queue_interrupts(struct pt_device *pt)
+{
+	iowrite32(SUPPORTED_INTERRUPTS, pt->cmd_q.reg_control + 0x000C);
+}
+
+static void pt_do_cmd_complete(unsigned long data)
+{
+	struct pt_tasklet_data *tdata = (struct pt_tasklet_data *)data;
+	struct pt_cmd *cmd = tdata->cmd;
+	struct pt_cmd_queue *cmd_q = &cmd->pt->cmd_q;
+	u32 tail;
+
+	if (cmd_q->cmd_error) {
+	       /*
+		* Log the error and flush the queue by
+		* moving the head pointer
+		*/
+		tail = lower_32_bits(cmd_q->qdma_tail + cmd_q->qidx * Q_DESC_SIZE);
+		pt_log_error(cmd_q->pt, cmd_q->cmd_error);
+		iowrite32(tail, cmd_q->reg_control + 0x0008);
+	}
+
+	cmd->pt_cmd_callback(cmd->data, cmd->ret);
+}
+
+static irqreturn_t pt_core_irq_handler(int irq, void *data)
+{
+	struct pt_device *pt = data;
+	struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+	u32 status;
+
+	pt_core_disable_queue_interrupts(pt);
+	pt->total_interrupts++;
+	status = ioread32(cmd_q->reg_control + 0x0010);
+	if (status) {
+		cmd_q->int_status = status;
+		cmd_q->q_status = ioread32(cmd_q->reg_control + 0x0100);
+		cmd_q->q_int_status = ioread32(cmd_q->reg_control + 0x0104);
+
+		/* On error, only save the first error value */
+		if ((status & INT_ERROR) && !cmd_q->cmd_error)
+			cmd_q->cmd_error = CMD_Q_ERROR(cmd_q->q_status);
+
+		/* Acknowledge the interrupt */
+		iowrite32(status, cmd_q->reg_control + 0x0010);
+		pt_core_enable_queue_interrupts(pt);
+		pt_do_cmd_complete((ulong)&pt->tdata);
+	}
+	return IRQ_HANDLED;
+}
+
+int pt_core_init(struct pt_device *pt)
+{
+	char dma_pool_name[MAX_DMAPOOL_NAME_LEN];
+	struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+	u32 dma_addr_lo, dma_addr_hi;
+	struct device *dev = pt->dev;
+	struct dma_pool *dma_pool;
+	int ret;
+
+	/* Allocate a dma pool for the queue */
+	snprintf(dma_pool_name, sizeof(dma_pool_name), "%s_q", dev_name(pt->dev));
+
+	dma_pool = dma_pool_create(dma_pool_name, dev,
+				   PT_DMAPOOL_MAX_SIZE,
+				   PT_DMAPOOL_ALIGN, 0);
+	if (!dma_pool)
+		return -ENOMEM;
+
+	/* ptdma core initialisation */
+	iowrite32(CMD_CONFIG_VHB_EN, pt->io_regs + CMD_CONFIG_OFFSET);
+	iowrite32(CMD_QUEUE_PRIO, pt->io_regs + CMD_QUEUE_PRIO_OFFSET);
+	iowrite32(CMD_TIMEOUT_DISABLE, pt->io_regs + CMD_TIMEOUT_OFFSET);
+	iowrite32(CMD_CLK_GATE_CONFIG, pt->io_regs + CMD_CLK_GATE_CTL_OFFSET);
+	iowrite32(CMD_CONFIG_REQID, pt->io_regs + CMD_REQID_CONFIG_OFFSET);
+
+	cmd_q->pt = pt;
+	cmd_q->dma_pool = dma_pool;
+	mutex_init(&cmd_q->q_mutex);
+
+	/* Page alignment satisfies our needs for N <= 128 */
+	cmd_q->qsize = Q_SIZE(Q_DESC_SIZE);
+	cmd_q->qbase = dma_alloc_coherent(dev, cmd_q->qsize,
+					  &cmd_q->qbase_dma,
+					  GFP_KERNEL);
+	if (!cmd_q->qbase) {
+		dev_err(dev, "unable to allocate command queue\n");
+		ret = -ENOMEM;
+		goto e_dma_alloc;
+	}
+
+	cmd_q->qidx = 0;
+
+	/* Preset some register values */
+	cmd_q->reg_control = pt->io_regs + CMD_Q_STATUS_INCR;
+
+	/* Turn off the queues and disable interrupts until ready */
+	pt_core_disable_queue_interrupts(pt);
+
+	cmd_q->qcontrol = 0; /* Start with nothing */
+	iowrite32(cmd_q->qcontrol, cmd_q->reg_control);
+
+	ioread32(cmd_q->reg_control + 0x0104);
+	ioread32(cmd_q->reg_control + 0x0100);
+
+	/* Clear the interrupt status */
+	iowrite32(SUPPORTED_INTERRUPTS, cmd_q->reg_control + 0x0010);
+
+	/* Request an irq */
+	ret = request_irq(pt->pt_irq, pt_core_irq_handler, 0, dev_name(pt->dev), pt);
+	if (ret)
+		goto e_pool;
+
+	/* Update the device registers with queue information. */
+	cmd_q->qcontrol &= ~CMD_Q_SIZE;
+	cmd_q->qcontrol |= FIELD_PREP(CMD_Q_SIZE, QUEUE_SIZE_VAL);
+
+	cmd_q->qdma_tail = cmd_q->qbase_dma;
+	dma_addr_lo = lower_32_bits(cmd_q->qdma_tail);
+	iowrite32((u32)dma_addr_lo, cmd_q->reg_control + 0x0004);
+	iowrite32((u32)dma_addr_lo, cmd_q->reg_control + 0x0008);
+
+	dma_addr_hi = upper_32_bits(cmd_q->qdma_tail);
+	cmd_q->qcontrol |= (dma_addr_hi << 16);
+	iowrite32(cmd_q->qcontrol, cmd_q->reg_control);
+
+	pt_core_enable_queue_interrupts(pt);
+
+	/* Register the DMA engine support */
+	ret = pt_dmaengine_register(pt);
+	if (ret)
+		goto e_dmaengine;
+
+	/* Set up debugfs entries */
+	ptdma_debugfs_setup(pt);
+
+	return 0;
+
+e_dmaengine:
+	free_irq(pt->pt_irq, pt);
+
+e_dma_alloc:
+	dma_free_coherent(dev, cmd_q->qsize, cmd_q->qbase, cmd_q->qbase_dma);
+
+e_pool:
+	dev_err(dev, "unable to allocate an IRQ\n");
+	dma_pool_destroy(pt->cmd_q.dma_pool);
+
+	return ret;
+}
+
+void pt_core_destroy(struct pt_device *pt)
+{
+	struct device *dev = pt->dev;
+	struct pt_cmd_queue *cmd_q = &pt->cmd_q;
+	struct pt_cmd *cmd;
+
+	/* Unregister the DMA engine */
+	pt_dmaengine_unregister(pt);
+
+	/* Disable and clear interrupts */
+	pt_core_disable_queue_interrupts(pt);
+
+	/* Turn off the run bit */
+	pt_stop_queue(cmd_q);
+
+	/* Clear the interrupt status */
+	iowrite32(SUPPORTED_INTERRUPTS, cmd_q->reg_control + 0x0010);
+	ioread32(cmd_q->reg_control + 0x0104);
+	ioread32(cmd_q->reg_control + 0x0100);
+
+	free_irq(pt->pt_irq, pt);
+
+	dma_free_coherent(dev, cmd_q->qsize, cmd_q->qbase,
+			  cmd_q->qbase_dma);
+
+	/* Flush the cmd queue */
+	while (!list_empty(&pt->cmd)) {
+		/* Invoke the callback directly with an error code */
+		cmd = list_first_entry(&pt->cmd, struct pt_cmd, entry);
+		list_del(&cmd->entry);
+		cmd->pt_cmd_callback(cmd->data, -ENODEV);
+	}
+}
diff --git a/drivers/dma/ptdma/ptdma-dmaengine.c b/drivers/dma/ptdma/ptdma-dmaengine.c
new file mode 100644
index 000000000000..c9e52f6f2f50
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-dmaengine.c
@@ -0,0 +1,389 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthrough DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#include "ptdma.h"
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+static inline struct pt_dma_chan *to_pt_chan(struct dma_chan *dma_chan)
+{
+	return container_of(dma_chan, struct pt_dma_chan, vc.chan);
+}
+
+static inline struct pt_dma_desc *to_pt_desc(struct virt_dma_desc *vd)
+{
+	return container_of(vd, struct pt_dma_desc, vd);
+}
+
+static void pt_free_chan_resources(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+
+	vchan_free_chan_resources(&chan->vc);
+}
+
+static void pt_synchronize(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+
+	vchan_synchronize(&chan->vc);
+}
+
+static void pt_do_cleanup(struct virt_dma_desc *vd)
+{
+	struct pt_dma_desc *desc = to_pt_desc(vd);
+	struct pt_device *pt = desc->pt;
+
+	kmem_cache_free(pt->dma_desc_cache, desc);
+}
+
+static int pt_dma_start_desc(struct pt_dma_desc *desc)
+{
+	struct pt_passthru_engine *pt_engine;
+	struct pt_device *pt;
+	struct pt_cmd *pt_cmd;
+	struct pt_cmd_queue *cmd_q;
+
+	desc->issued_to_hw = 1;
+
+	pt_cmd = &desc->pt_cmd;
+	pt = pt_cmd->pt;
+	cmd_q = &pt->cmd_q;
+	pt_engine = &pt_cmd->passthru;
+
+	pt->tdata.cmd = pt_cmd;
+
+	/* Execute the command */
+	pt_cmd->ret = pt_core_perform_passthru(cmd_q, pt_engine);
+
+	return 0;
+}
+
+static struct pt_dma_desc *pt_next_dma_desc(struct pt_dma_chan *chan)
+{
+	/* Get the next DMA descriptor on the active list */
+	struct virt_dma_desc *vd = vchan_next_desc(&chan->vc);
+
+	return vd ? to_pt_desc(vd) : NULL;
+}
+
+static struct pt_dma_desc *pt_handle_active_desc(struct pt_dma_chan *chan,
+						 struct pt_dma_desc *desc)
+{
+	struct dma_async_tx_descriptor *tx_desc;
+	struct virt_dma_desc *vd;
+	unsigned long flags;
+
+	/* Loop over descriptors until one is found with commands */
+	do {
+		if (desc) {
+			if (!desc->issued_to_hw) {
+				/* No errors, keep going */
+				if (desc->status != DMA_ERROR)
+					return desc;
+			}
+
+			tx_desc = &desc->vd.tx;
+			vd = &desc->vd;
+		} else {
+			tx_desc = NULL;
+		}
+
+		spin_lock_irqsave(&chan->vc.lock, flags);
+
+		if (desc) {
+			if (desc->status != DMA_ERROR)
+				desc->status = DMA_COMPLETE;
+
+			dma_cookie_complete(tx_desc);
+			dma_descriptor_unmap(tx_desc);
+			list_del(&desc->vd.node);
+		}
+
+		desc = pt_next_dma_desc(chan);
+
+		spin_unlock_irqrestore(&chan->vc.lock, flags);
+
+		if (tx_desc) {
+			dmaengine_desc_get_callback_invoke(tx_desc, NULL);
+			dma_run_dependencies(tx_desc);
+			vchan_vdesc_fini(vd);
+		}
+	} while (desc);
+
+	return NULL;
+}
+
+static void pt_cmd_callback(void *data, int err)
+{
+	struct pt_dma_desc *desc = data;
+	struct dma_chan *dma_chan;
+	struct pt_dma_chan *chan;
+	int ret;
+
+	if (err == -EINPROGRESS)
+		return;
+
+	dma_chan = desc->vd.tx.chan;
+	chan = to_pt_chan(dma_chan);
+
+	if (err)
+		desc->status = DMA_ERROR;
+
+	while (true) {
+		/* Check for DMA descriptor completion */
+		desc = pt_handle_active_desc(chan, desc);
+
+		/* Don't submit cmd if no descriptor or DMA is paused */
+		if (!desc)
+			break;
+
+		ret = pt_dma_start_desc(desc);
+		if (!ret)
+			break;
+
+		desc->status = DMA_ERROR;
+	}
+}
+
+static struct pt_dma_desc *pt_alloc_dma_desc(struct pt_dma_chan *chan,
+					     unsigned long flags)
+{
+	struct pt_dma_desc *desc;
+
+	desc = kmem_cache_zalloc(chan->pt->dma_desc_cache, GFP_NOWAIT);
+	if (!desc)
+		return NULL;
+
+	vchan_tx_prep(&chan->vc, &desc->vd, flags);
+
+	desc->pt = chan->pt;
+	desc->issued_to_hw = 0;
+	desc->status = DMA_IN_PROGRESS;
+
+	return desc;
+}
+
+static struct pt_dma_desc *pt_create_desc(struct dma_chan *dma_chan,
+					  dma_addr_t dst,
+					  dma_addr_t src,
+					  unsigned int len,
+					  unsigned long flags)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	struct pt_passthru_engine *pt_engine;
+	struct pt_dma_desc *desc;
+	struct pt_cmd *pt_cmd;
+
+	desc = pt_alloc_dma_desc(chan, flags);
+	if (!desc)
+		return NULL;
+
+	pt_cmd = &desc->pt_cmd;
+	pt_cmd->pt = chan->pt;
+	pt_engine = &pt_cmd->passthru;
+	pt_cmd->engine = PT_ENGINE_PASSTHRU;
+	pt_engine->src_dma = src;
+	pt_engine->dst_dma = dst;
+	pt_engine->src_len = len;
+	pt_cmd->pt_cmd_callback = pt_cmd_callback;
+	pt_cmd->data = desc;
+
+	desc->len = len;
+
+	return desc;
+}
+
+static struct dma_async_tx_descriptor *
+pt_prep_dma_memcpy(struct dma_chan *dma_chan, dma_addr_t dst,
+		   dma_addr_t src, size_t len, unsigned long flags)
+{
+	struct pt_dma_desc *desc;
+
+	desc = pt_create_desc(dma_chan, dst, src, len, flags);
+	if (!desc)
+		return NULL;
+
+	return &desc->vd.tx;
+}
+
+static struct dma_async_tx_descriptor *
+pt_prep_dma_interrupt(struct dma_chan *dma_chan, unsigned long flags)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	struct pt_dma_desc *desc;
+
+	desc = pt_alloc_dma_desc(chan, flags);
+	if (!desc)
+		return NULL;
+
+	return &desc->vd.tx;
+}
+
+static void pt_issue_pending(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	struct pt_dma_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+
+	vchan_issue_pending(&chan->vc);
+
+	desc = pt_next_dma_desc(chan);
+
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+
+	/* If there was nothing active, start processing */
+	if (desc)
+		pt_cmd_callback(desc, 0);
+}
+
+static int pt_pause(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+	pt_stop_queue(&chan->pt->cmd_q);
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+
+	return 0;
+}
+
+static int pt_resume(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	struct pt_dma_desc *desc = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+	pt_start_queue(&chan->pt->cmd_q);
+	desc = pt_next_dma_desc(chan);
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+
+	/* If there was something active, re-start */
+	if (desc)
+		pt_cmd_callback(desc, 0);
+
+	return 0;
+}
+
+static int pt_terminate_all(struct dma_chan *dma_chan)
+{
+	struct pt_dma_chan *chan = to_pt_chan(dma_chan);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	spin_lock_irqsave(&chan->vc.lock, flags);
+	vchan_get_all_descriptors(&chan->vc, &head);
+	spin_unlock_irqrestore(&chan->vc.lock, flags);
+
+	vchan_dma_desc_free_list(&chan->vc, &head);
+	vchan_free_chan_resources(&chan->vc);
+
+	return 0;
+}
+
+int pt_dmaengine_register(struct pt_device *pt)
+{
+	struct pt_dma_chan *chan;
+	struct dma_device *dma_dev = &pt->dma_dev;
+	char *cmd_cache_name;
+	char *desc_cache_name;
+	int ret;
+
+	pt->pt_dma_chan = devm_kzalloc(pt->dev, sizeof(*pt->pt_dma_chan),
+				       GFP_KERNEL);
+	if (!pt->pt_dma_chan)
+		return -ENOMEM;
+
+	cmd_cache_name = devm_kasprintf(pt->dev, GFP_KERNEL,
+					"%s-dmaengine-cmd-cache",
+					dev_name(pt->dev));
+	if (!cmd_cache_name)
+		return -ENOMEM;
+
+	desc_cache_name = devm_kasprintf(pt->dev, GFP_KERNEL,
+					 "%s-dmaengine-desc-cache",
+					 dev_name(pt->dev));
+	if (!desc_cache_name) {
+		ret = -ENOMEM;
+		goto err_cache;
+	}
+
+	pt->dma_desc_cache = kmem_cache_create(desc_cache_name,
+					       sizeof(struct pt_dma_desc), 0,
+					       SLAB_HWCACHE_ALIGN, NULL);
+	if (!pt->dma_desc_cache) {
+		ret = -ENOMEM;
+		goto err_cache;
+	}
+
+	dma_dev->dev = pt->dev;
+	dma_dev->src_addr_widths = DMA_SLAVE_BUSWIDTH_64_BYTES;
+	dma_dev->dst_addr_widths = DMA_SLAVE_BUSWIDTH_64_BYTES;
+	dma_dev->directions = DMA_MEM_TO_MEM;
+	dma_dev->residue_granularity = DMA_RESIDUE_GRANULARITY_DESCRIPTOR;
+	dma_cap_set(DMA_MEMCPY, dma_dev->cap_mask);
+	dma_cap_set(DMA_INTERRUPT, dma_dev->cap_mask);
+
+	/*
+	 * PTDMA is intended to be used with the AMD NTB devices, hence
+	 * marking it as DMA_PRIVATE.
+	 */
+	dma_cap_set(DMA_PRIVATE, dma_dev->cap_mask);
+
+	INIT_LIST_HEAD(&dma_dev->channels);
+
+	chan = pt->pt_dma_chan;
+	chan->pt = pt;
+
+	/* Set base and prep routines */
+	dma_dev->device_free_chan_resources = pt_free_chan_resources;
+	dma_dev->device_prep_dma_memcpy = pt_prep_dma_memcpy;
+	dma_dev->device_prep_dma_interrupt = pt_prep_dma_interrupt;
+	dma_dev->device_issue_pending = pt_issue_pending;
+	dma_dev->device_tx_status = dma_cookie_status;
+	dma_dev->device_pause = pt_pause;
+	dma_dev->device_resume = pt_resume;
+	dma_dev->device_terminate_all = pt_terminate_all;
+	dma_dev->device_synchronize = pt_synchronize;
+
+	chan->vc.desc_free = pt_do_cleanup;
+	vchan_init(&chan->vc, dma_dev);
+
+	dma_set_mask_and_coherent(pt->dev, DMA_BIT_MASK(64));
+
+	ret = dma_async_device_register(dma_dev);
+	if (ret)
+		goto err_reg;
+
+	return 0;
+
+err_reg:
+	kmem_cache_destroy(pt->dma_desc_cache);
+
+err_cache:
+	kmem_cache_destroy(pt->dma_cmd_cache);
+
+	return ret;
+}
+
+void pt_dmaengine_unregister(struct pt_device *pt)
+{
+	struct dma_device *dma_dev = &pt->dma_dev;
+
+	dma_async_device_unregister(dma_dev);
+
+	kmem_cache_destroy(pt->dma_desc_cache);
+	kmem_cache_destroy(pt->dma_cmd_cache);
+}
diff --git a/drivers/dma/ptdma/ptdma-pci.c b/drivers/dma/ptdma/ptdma-pci.c
new file mode 100644
index 000000000000..22739ff0c3c5
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma-pci.c
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@amd.com>
+ * Author: Tom Lendacky <thomas.lendacky@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/kthread.h>
+#include <linux/module.h>
+#include <linux/pci_ids.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+
+#include "ptdma.h"
+
+struct pt_msix {
+	int msix_count;
+	struct msix_entry msix_entry;
+};
+
+/*
+ * pt_alloc_struct - allocate and initialize the pt_device struct
+ *
+ * @dev: device struct of the PTDMA
+ */
+static struct pt_device *pt_alloc_struct(struct device *dev)
+{
+	struct pt_device *pt;
+
+	pt = devm_kzalloc(dev, sizeof(*pt), GFP_KERNEL);
+
+	if (!pt)
+		return NULL;
+	pt->dev = dev;
+
+	INIT_LIST_HEAD(&pt->cmd);
+
+	return pt;
+}
+
+static int pt_get_msix_irqs(struct pt_device *pt)
+{
+	struct pt_msix *pt_msix = pt->pt_msix;
+	struct device *dev = pt->dev;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int ret;
+
+	pt_msix->msix_entry.entry = 0;
+
+	ret = pci_enable_msix_range(pdev, &pt_msix->msix_entry, 1, 1);
+	if (ret < 0)
+		return ret;
+
+	pt_msix->msix_count = ret;
+
+	pt->pt_irq = pt_msix->msix_entry.vector;
+
+	return 0;
+}
+
+static int pt_get_msi_irq(struct pt_device *pt)
+{
+	struct device *dev = pt->dev;
+	struct pci_dev *pdev = to_pci_dev(dev);
+	int ret;
+
+	ret = pci_enable_msi(pdev);
+	if (ret)
+		return ret;
+
+	pt->pt_irq = pdev->irq;
+
+	return 0;
+}
+
+static int pt_get_irqs(struct pt_device *pt)
+{
+	struct device *dev = pt->dev;
+	int ret;
+
+	ret = pt_get_msix_irqs(pt);
+	if (!ret)
+		return 0;
+
+	/* Couldn't get MSI-X vectors, try MSI */
+	dev_err(dev, "could not enable MSI-X (%d), trying MSI\n", ret);
+	ret = pt_get_msi_irq(pt);
+	if (!ret)
+		return 0;
+
+	/* Couldn't get MSI interrupt */
+	dev_err(dev, "could not enable MSI (%d)\n", ret);
+
+	return ret;
+}
+
+static void pt_free_irqs(struct pt_device *pt)
+{
+	struct pt_msix *pt_msix = pt->pt_msix;
+	struct device *dev = pt->dev;
+	struct pci_dev *pdev = to_pci_dev(dev);
+
+	if (pt_msix->msix_count)
+		pci_disable_msix(pdev);
+	else if (pt->pt_irq)
+		pci_disable_msi(pdev);
+
+	pt->pt_irq = 0;
+}
+
+static int pt_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+	struct pt_device *pt;
+	struct pt_msix *pt_msix;
+	struct device *dev = &pdev->dev;
+	void __iomem * const *iomap_table;
+	int bar_mask;
+	int ret = -ENOMEM;
+
+	pt = pt_alloc_struct(dev);
+	if (!pt)
+		goto e_err;
+
+	pt_msix = devm_kzalloc(dev, sizeof(*pt_msix), GFP_KERNEL);
+	if (!pt_msix)
+		goto e_err;
+
+	pt->pt_msix = pt_msix;
+	pt->dev_vdata = (struct pt_dev_vdata *)id->driver_data;
+	if (!pt->dev_vdata) {
+		ret = -ENODEV;
+		dev_err(dev, "missing driver data\n");
+		goto e_err;
+	}
+
+	ret = pcim_enable_device(pdev);
+	if (ret) {
+		dev_err(dev, "pcim_enable_device failed (%d)\n", ret);
+		goto e_err;
+	}
+
+	bar_mask = pci_select_bars(pdev, IORESOURCE_MEM);
+	ret = pcim_iomap_regions(pdev, bar_mask, "ptdma");
+	if (ret) {
+		dev_err(dev, "pcim_iomap_regions failed (%d)\n", ret);
+		goto e_err;
+	}
+
+	iomap_table = pcim_iomap_table(pdev);
+	if (!iomap_table) {
+		dev_err(dev, "pcim_iomap_table failed\n");
+		ret = -ENOMEM;
+		goto e_err;
+	}
+
+	pt->io_regs = iomap_table[pt->dev_vdata->bar];
+	if (!pt->io_regs) {
+		dev_err(dev, "ioremap failed\n");
+		ret = -ENOMEM;
+		goto e_err;
+	}
+
+	ret = pt_get_irqs(pt);
+	if (ret)
+		goto e_err;
+
+	pci_set_master(pdev);
+
+	ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(48));
+	if (ret) {
+		ret = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+		if (ret) {
+			dev_err(dev, "dma_set_mask_and_coherent failed (%d)\n",
+				ret);
+			goto e_err;
+		}
+	}
+
+	dev_set_drvdata(dev, pt);
+
+	if (pt->dev_vdata)
+		ret = pt_core_init(pt);
+
+	if (ret)
+		goto e_err;
+
+	return 0;
+
+e_err:
+	dev_err(dev, "initialization failed ret = %d\n", ret);
+
+	return ret;
+}
+
+static void pt_pci_remove(struct pci_dev *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct pt_device *pt = dev_get_drvdata(dev);
+
+	if (!pt)
+		return;
+
+	if (pt->dev_vdata)
+		pt_core_destroy(pt);
+
+	pt_free_irqs(pt);
+}
+
+static const struct pt_dev_vdata dev_vdata[] = {
+	{
+		.bar = 2,
+	},
+};
+
+static const struct pci_device_id pt_pci_table[] = {
+	{ PCI_VDEVICE(AMD, 0x1498), (kernel_ulong_t)&dev_vdata[0] },
+	/* Last entry must be zero */
+	{ 0, }
+};
+MODULE_DEVICE_TABLE(pci, pt_pci_table);
+
+static struct pci_driver pt_pci_driver = {
+	.name = "ptdma",
+	.id_table = pt_pci_table,
+	.probe = pt_pci_probe,
+	.remove = pt_pci_remove,
+};
+
+module_pci_driver(pt_pci_driver);
+
+MODULE_AUTHOR("Sanjay R Mehta <sanju.mehta@amd.com>");
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("AMD PassThru DMA driver");
diff --git a/drivers/dma/ptdma/ptdma.h b/drivers/dma/ptdma/ptdma.h
new file mode 100644
index 000000000000..afbf192c9230
--- /dev/null
+++ b/drivers/dma/ptdma/ptdma.h
@@ -0,0 +1,324 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AMD Passthru DMA device driver
+ * -- Based on the CCP driver
+ *
+ * Copyright (C) 2016,2021 Advanced Micro Devices, Inc.
+ *
+ * Author: Sanjay R Mehta <sanju.mehta@amd.com>
+ * Author: Tom Lendacky <thomas.lendacky@amd.com>
+ * Author: Gary R Hook <gary.hook@amd.com>
+ */
+
+#ifndef __PT_DEV_H__
+#define __PT_DEV_H__
+
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+#include <linux/pci.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/list.h>
+#include <linux/wait.h>
+#include <linux/dmapool.h>
+
+#include "../virt-dma.h"
+
+#define MAX_PT_NAME_LEN			16
+#define MAX_DMAPOOL_NAME_LEN		32
+
+#define MAX_HW_QUEUES			1
+#define MAX_CMD_QLEN			100
+
+#define PT_ENGINE_PASSTHRU		5
+
+/* Register Mappings */
+#define IRQ_MASK_REG			0x040
+#define IRQ_STATUS_REG			0x200
+
+#define CMD_Q_ERROR(__qs)		((__qs) & 0x0000003f)
+
+#define CMD_QUEUE_PRIO_OFFSET		0x00
+#define CMD_REQID_CONFIG_OFFSET		0x04
+#define CMD_TIMEOUT_OFFSET		0x08
+#define CMD_PT_VERSION			0x10
+
+#define CMD_Q_CONTROL_BASE		0x0000
+#define CMD_Q_TAIL_LO_BASE		0x0004
+#define CMD_Q_HEAD_LO_BASE		0x0008
+#define CMD_Q_INT_ENABLE_BASE		0x000C
+#define CMD_Q_INTERRUPT_STATUS_BASE	0x0010
+
+#define CMD_Q_STATUS_BASE		0x0100
+#define CMD_Q_INT_STATUS_BASE		0x0104
+#define CMD_Q_DMA_STATUS_BASE		0x0108
+#define CMD_Q_DMA_READ_STATUS_BASE	0x010C
+#define CMD_Q_DMA_WRITE_STATUS_BASE	0x0110
+#define CMD_Q_ABORT_BASE		0x0114
+#define CMD_Q_AX_CACHE_BASE		0x0118
+
+#define CMD_CONFIG_OFFSET		0x1120
+#define CMD_CLK_GATE_CTL_OFFSET		0x6004
+
+#define CMD_DESC_DW0_VAL		0x500012
+
+/* Address offset for virtual queue registers */
+#define CMD_Q_STATUS_INCR		0x1000
+
+/* Bit masks */
+#define CMD_CONFIG_REQID		0
+#define CMD_TIMEOUT_DISABLE		0
+#define CMD_CLK_DYN_GATING_DIS		0
+#define CMD_CLK_SW_GATE_MODE		0
+#define CMD_CLK_GATE_CTL		0
+#define CMD_QUEUE_PRIO			GENMASK(2, 1)
+#define CMD_CONFIG_VHB_EN		BIT(0)
+#define CMD_CLK_DYN_GATING_EN		BIT(0)
+#define CMD_CLK_HW_GATE_MODE		BIT(0)
+#define CMD_CLK_GATE_ON_DELAY		BIT(12)
+#define CMD_CLK_GATE_OFF_DELAY		BIT(12)
+
+#define CMD_CLK_GATE_CONFIG		(CMD_CLK_GATE_CTL | \
+					CMD_CLK_HW_GATE_MODE | \
+					CMD_CLK_GATE_ON_DELAY | \
+					CMD_CLK_DYN_GATING_EN | \
+					CMD_CLK_GATE_OFF_DELAY)
+
+#define CMD_Q_LEN			32
+#define CMD_Q_RUN			BIT(0)
+#define CMD_Q_HALT			BIT(1)
+#define CMD_Q_MEM_LOCATION		BIT(2)
+#define CMD_Q_SIZE_MASK			GENMASK(4, 0)
+#define CMD_Q_SIZE			GENMASK(7, 3)
+#define CMD_Q_SHIFT			GENMASK(1, 0)
+#define QUEUE_SIZE_VAL			((ffs(CMD_Q_LEN) - 2) & \
+								  CMD_Q_SIZE_MASK)
+#define Q_PTR_MASK			(2 << (QUEUE_SIZE_VAL + 5) - 1)
+#define Q_DESC_SIZE			sizeof(struct ptdma_desc)
+#define Q_SIZE(n)			(CMD_Q_LEN * (n))
+
+#define INT_COMPLETION			BIT(0)
+#define INT_ERROR			BIT(1)
+#define INT_QUEUE_STOPPED		BIT(2)
+#define INT_EMPTY_QUEUE			BIT(3)
+#define SUPPORTED_INTERRUPTS		(INT_COMPLETION | INT_ERROR)
+
+/****** Local Storage Block ******/
+#define LSB_START			0
+#define LSB_END				127
+#define LSB_COUNT			(LSB_END - LSB_START + 1)
+
+#define PT_DMAPOOL_MAX_SIZE		64
+#define PT_DMAPOOL_ALIGN		BIT(5)
+
+#define PT_PASSTHRU_BLOCKSIZE		512
+
+struct pt_device;
+
+struct pt_tasklet_data {
+	struct completion completion;
+	struct pt_cmd *cmd;
+};
+
+/*
+ * struct pt_passthru_engine - pass-through operation
+ *   without performing DMA mapping
+ * @mask: mask to be applied to data
+ * @mask_len: length in bytes of mask
+ * @src_dma: data to be used for this operation
+ * @dst_dma: data produced by this operation
+ * @src_len: length in bytes of data used for this operation
+ *
+ * Variables required to be set when calling pt_enqueue_cmd():
+ *   - bit_mod, byte_swap, src, dst, src_len
+ *   - mask, mask_len if bit_mod is not PT_PASSTHRU_BITWISE_NOOP
+ */
+struct pt_passthru_engine {
+	dma_addr_t mask;
+	u32 mask_len;		/* In bytes */
+
+	dma_addr_t src_dma, dst_dma;
+	u64 src_len;		/* In bytes */
+};
+
+/*
+ * struct pt_cmd - PTDMA operation request
+ * @entry: list element
+ * @work: work element used for callbacks
+ * @pt: PT device to be run on
+ * @ret: operation return code
+ * @flags: cmd processing flags
+ * @engine: PTDMA operation to perform (passthru)
+ * @engine_error: PT engine return code
+ * @passthru: engine specific structures, refer to specific engine struct below
+ * @callback: operation completion callback function
+ * @data: parameter value to be supplied to the callback function
+ *
+ * Variables required to be set when calling pt_enqueue_cmd():
+ *   - engine, callback
+ *   - See the operation structures below for what is required for each
+ *     operation.
+ */
+struct pt_cmd {
+	struct list_head entry;
+	struct work_struct work;
+	struct pt_device *pt;
+	int ret;
+	u32 engine;
+	u32 engine_error;
+	struct pt_passthru_engine passthru;
+	/* Completion callback support */
+	void (*pt_cmd_callback)(void *data, int err);
+	void *data;
+};
+
+struct pt_dma_desc {
+	struct virt_dma_desc vd;
+	struct pt_device *pt;
+	enum dma_status status;
+	size_t len;
+	bool issued_to_hw;
+	struct pt_cmd pt_cmd;
+};
+
+struct pt_dma_chan {
+	struct virt_dma_chan vc;
+	struct pt_device *pt;
+};
+
+struct pt_cmd_queue {
+	struct pt_device *pt;
+
+	/* Queue dma pool */
+	struct dma_pool *dma_pool;
+
+	/* Queue base address (not neccessarily aligned)*/
+	struct ptdma_desc *qbase;
+
+	/* Aligned queue start address (per requirement) */
+	struct mutex q_mutex ____cacheline_aligned;
+	unsigned int qidx;
+
+	unsigned int qsize;
+	dma_addr_t qbase_dma;
+	dma_addr_t qdma_tail;
+
+	unsigned int active;
+	unsigned int suspended;
+
+	/* Register addresses for queue */
+	void __iomem *reg_control;
+	u32 qcontrol; /* Cached control register */
+
+	/* Status values from job */
+	u32 int_status;
+	u32 q_status;
+	u32 q_int_status;
+	u32 cmd_error;
+	/* Queue Statistics */
+	unsigned long total_pt_ops;
+} ____cacheline_aligned;
+
+struct pt_device {
+	struct list_head entry;
+
+	unsigned int ord;
+	char name[MAX_PT_NAME_LEN];
+
+	struct device *dev;
+
+	/* Bus specific device information */
+	struct pt_msix *pt_msix;
+
+	struct pt_dev_vdata *dev_vdata;
+
+	unsigned int pt_irq;
+
+	/* I/O area used for device communication */
+	void __iomem *io_regs;
+
+	spinlock_t cmd_lock ____cacheline_aligned;
+	unsigned int cmd_count;
+	struct list_head cmd;
+
+	/*
+	 * The command queue. This represent the queue available on the
+	 * PTDMA that are available for processing cmds
+	 */
+	struct pt_cmd_queue cmd_q;
+
+	/* Support for the DMA Engine capabilities */
+	struct dma_device dma_dev;
+	struct pt_dma_chan *pt_dma_chan;
+	struct kmem_cache *dma_cmd_cache;
+	struct kmem_cache *dma_desc_cache;
+
+	wait_queue_head_t lsb_queue;
+
+	/* Device Statistics */
+	unsigned long total_interrupts;
+
+	struct pt_tasklet_data tdata;
+};
+
+/*
+ * descriptor for PTDMA commands
+ * 8 32-bit words:
+ * word 0: function; engine; control bits
+ * word 1: length of source data
+ * word 2: low 32 bits of source pointer
+ * word 3: upper 16 bits of source pointer; source memory type
+ * word 4: low 32 bits of destination pointer
+ * word 5: upper 16 bits of destination pointer; destination memory type
+ * word 6: reserved 32 bits
+ * word 7: reserved 32 bits
+ */
+
+#define DWORD0_SOC	BIT(0)
+#define DWORD0_IOC	BIT(1)
+
+struct dword3 {
+	unsigned int  src_hi:16;
+	unsigned int  src_mem:2;
+	unsigned int  lsb_cxt_id:8;
+	unsigned int  rsvd1:5;
+	unsigned int  fixed:1;
+};
+
+struct dword5 {
+	unsigned int  dst_hi:16;
+	unsigned int  dst_mem:2;
+	unsigned int  rsvd1:13;
+	unsigned int  fixed:1;
+};
+
+struct ptdma_desc {
+	u32 dw0;
+	u32 length;
+	u32 src_lo;
+	struct dword3 dw3;
+	u32 dst_lo;
+	struct dword5 dw5;
+	__le32 rsvd1;
+	__le32 rsvd2;
+};
+
+/* Structure to hold PT device data */
+struct pt_dev_vdata {
+	const unsigned int bar;
+};
+
+int pt_dmaengine_register(struct pt_device *pt);
+void pt_dmaengine_unregister(struct pt_device *pt);
+
+void ptdma_debugfs_setup(struct pt_device *pt);
+int pt_core_init(struct pt_device *pt);
+void pt_core_destroy(struct pt_device *pt);
+
+int pt_core_perform_passthru(struct pt_cmd_queue *cmd_q,
+			     struct pt_passthru_engine *pt_engine);
+
+void pt_start_queue(struct pt_cmd_queue *cmd_q);
+void pt_stop_queue(struct pt_cmd_queue *cmd_q);
+
+#endif
diff --git a/drivers/dma/sh/Kconfig b/drivers/dma/sh/Kconfig
index 13437323a85b..a46296285307 100644
--- a/drivers/dma/sh/Kconfig
+++ b/drivers/dma/sh/Kconfig
@@ -47,3 +47,12 @@ config RENESAS_USB_DMAC
 	help
 	  This driver supports the USB-DMA controller found in the Renesas
 	  SoCs.
+
+config RZ_DMAC
+	tristate "Renesas RZ/G2L DMA Controller"
+	depends on ARCH_R9A07G044 || COMPILE_TEST
+	select RENESAS_DMA
+	select DMA_VIRTUAL_CHANNELS
+	help
+	  This driver supports the general purpose DMA controller found in the
+	  Renesas RZ/G2L SoC variants.
diff --git a/drivers/dma/sh/Makefile b/drivers/dma/sh/Makefile
index abdf10341725..360ab6d25e76 100644
--- a/drivers/dma/sh/Makefile
+++ b/drivers/dma/sh/Makefile
@@ -15,3 +15,4 @@ obj-$(CONFIG_SH_DMAE) += shdma.o
 
 obj-$(CONFIG_RCAR_DMAC) += rcar-dmac.o
 obj-$(CONFIG_RENESAS_USB_DMAC) += usb-dmac.o
+obj-$(CONFIG_RZ_DMAC) += rz-dmac.o
diff --git a/drivers/dma/sh/rz-dmac.c b/drivers/dma/sh/rz-dmac.c
new file mode 100644
index 000000000000..f9f30cbeccbe
--- /dev/null
+++ b/drivers/dma/sh/rz-dmac.c
@@ -0,0 +1,969 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Renesas RZ/G2L DMA Controller Driver
+ *
+ * Based on imx-dma.c
+ *
+ * Copyright (C) 2021 Renesas Electronics Corp.
+ * Copyright 2010 Sascha Hauer, Pengutronix <s.hauer@pengutronix.de>
+ * Copyright 2012 Javier Martin, Vista Silicon <javier.martin@vista-silicon.com>
+ */
+
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
+#include <linux/interrupt.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_dma.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "../dmaengine.h"
+#include "../virt-dma.h"
+
+enum  rz_dmac_prep_type {
+	RZ_DMAC_DESC_MEMCPY,
+	RZ_DMAC_DESC_SLAVE_SG,
+};
+
+struct rz_lmdesc {
+	u32 header;
+	u32 sa;
+	u32 da;
+	u32 tb;
+	u32 chcfg;
+	u32 chitvl;
+	u32 chext;
+	u32 nxla;
+};
+
+struct rz_dmac_desc {
+	struct virt_dma_desc vd;
+	dma_addr_t src;
+	dma_addr_t dest;
+	size_t len;
+	struct list_head node;
+	enum dma_transfer_direction direction;
+	enum rz_dmac_prep_type type;
+	/* For slave sg */
+	struct scatterlist *sg;
+	unsigned int sgcount;
+};
+
+#define to_rz_dmac_desc(d)	container_of(d, struct rz_dmac_desc, vd)
+
+struct rz_dmac_chan {
+	struct virt_dma_chan vc;
+	void __iomem *ch_base;
+	void __iomem *ch_cmn_base;
+	unsigned int index;
+	int irq;
+	struct rz_dmac_desc *desc;
+	int descs_allocated;
+
+	enum dma_slave_buswidth src_word_size;
+	enum dma_slave_buswidth dst_word_size;
+	dma_addr_t src_per_address;
+	dma_addr_t dst_per_address;
+
+	u32 chcfg;
+	u32 chctrl;
+	int mid_rid;
+
+	struct list_head ld_free;
+	struct list_head ld_queue;
+	struct list_head ld_active;
+
+	struct {
+		struct rz_lmdesc *base;
+		struct rz_lmdesc *head;
+		struct rz_lmdesc *tail;
+		dma_addr_t base_dma;
+	} lmdesc;
+};
+
+#define to_rz_dmac_chan(c)	container_of(c, struct rz_dmac_chan, vc.chan)
+
+struct rz_dmac {
+	struct dma_device engine;
+	struct device *dev;
+	void __iomem *base;
+	void __iomem *ext_base;
+
+	unsigned int n_channels;
+	struct rz_dmac_chan *channels;
+
+	DECLARE_BITMAP(modules, 1024);
+};
+
+#define to_rz_dmac(d)	container_of(d, struct rz_dmac, engine)
+
+/*
+ * -----------------------------------------------------------------------------
+ * Registers
+ */
+
+#define CHSTAT				0x0024
+#define CHCTRL				0x0028
+#define CHCFG				0x002c
+#define NXLA				0x0038
+
+#define DCTRL				0x0000
+
+#define EACH_CHANNEL_OFFSET		0x0040
+#define CHANNEL_0_7_OFFSET		0x0000
+#define CHANNEL_0_7_COMMON_BASE		0x0300
+#define CHANNEL_8_15_OFFSET		0x0400
+#define CHANNEL_8_15_COMMON_BASE	0x0700
+
+#define CHSTAT_ER			BIT(4)
+#define CHSTAT_EN			BIT(0)
+
+#define CHCTRL_CLRINTMSK		BIT(17)
+#define CHCTRL_CLRSUS			BIT(9)
+#define CHCTRL_CLRTC			BIT(6)
+#define CHCTRL_CLREND			BIT(5)
+#define CHCTRL_CLRRQ			BIT(4)
+#define CHCTRL_SWRST			BIT(3)
+#define CHCTRL_STG			BIT(2)
+#define CHCTRL_CLREN			BIT(1)
+#define CHCTRL_SETEN			BIT(0)
+#define CHCTRL_DEFAULT			(CHCTRL_CLRINTMSK | CHCTRL_CLRSUS | \
+					 CHCTRL_CLRTC |	CHCTRL_CLREND | \
+					 CHCTRL_CLRRQ | CHCTRL_SWRST | \
+					 CHCTRL_CLREN)
+
+#define CHCFG_DMS			BIT(31)
+#define CHCFG_DEM			BIT(24)
+#define CHCFG_DAD			BIT(21)
+#define CHCFG_SAD			BIT(20)
+#define CHCFG_REQD			BIT(3)
+#define CHCFG_SEL(bits)			((bits) & 0x07)
+#define CHCFG_MEM_COPY			(0x80400008)
+#define CHCFG_FILL_DDS(a)		(((a) << 16) & GENMASK(19, 16))
+#define CHCFG_FILL_SDS(a)		(((a) << 12) & GENMASK(15, 12))
+#define CHCFG_FILL_TM(a)		(((a) & BIT(5)) << 22)
+#define CHCFG_FILL_AM(a)		(((a) & GENMASK(4, 2)) << 6)
+#define CHCFG_FILL_LVL(a)		(((a) & BIT(1)) << 5)
+#define CHCFG_FILL_HIEN(a)		(((a) & BIT(0)) << 5)
+
+#define MID_RID_MASK			GENMASK(9, 0)
+#define CHCFG_MASK			GENMASK(15, 10)
+#define CHCFG_DS_INVALID		0xFF
+#define DCTRL_LVINT			BIT(1)
+#define DCTRL_PR			BIT(0)
+#define DCTRL_DEFAULT			(DCTRL_LVINT | DCTRL_PR)
+
+/* LINK MODE DESCRIPTOR */
+#define HEADER_LV			BIT(0)
+
+#define RZ_DMAC_MAX_CHAN_DESCRIPTORS	16
+#define RZ_DMAC_MAX_CHANNELS		16
+#define DMAC_NR_LMDESC			64
+
+/*
+ * -----------------------------------------------------------------------------
+ * Device access
+ */
+
+static void rz_dmac_writel(struct rz_dmac *dmac, unsigned int val,
+			   unsigned int offset)
+{
+	writel(val, dmac->base + offset);
+}
+
+static void rz_dmac_ext_writel(struct rz_dmac *dmac, unsigned int val,
+			       unsigned int offset)
+{
+	writel(val, dmac->ext_base + offset);
+}
+
+static u32 rz_dmac_ext_readl(struct rz_dmac *dmac, unsigned int offset)
+{
+	return readl(dmac->ext_base + offset);
+}
+
+static void rz_dmac_ch_writel(struct rz_dmac_chan *channel, unsigned int val,
+			      unsigned int offset, int which)
+{
+	if (which)
+		writel(val, channel->ch_base + offset);
+	else
+		writel(val, channel->ch_cmn_base + offset);
+}
+
+static u32 rz_dmac_ch_readl(struct rz_dmac_chan *channel,
+			    unsigned int offset, int which)
+{
+	if (which)
+		return readl(channel->ch_base + offset);
+	else
+		return readl(channel->ch_cmn_base + offset);
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * Initialization
+ */
+
+static void rz_lmdesc_setup(struct rz_dmac_chan *channel,
+			    struct rz_lmdesc *lmdesc)
+{
+	u32 nxla;
+
+	channel->lmdesc.base = lmdesc;
+	channel->lmdesc.head = lmdesc;
+	channel->lmdesc.tail = lmdesc;
+	nxla = channel->lmdesc.base_dma;
+	while (lmdesc < (channel->lmdesc.base + (DMAC_NR_LMDESC - 1))) {
+		lmdesc->header = 0;
+		nxla += sizeof(*lmdesc);
+		lmdesc->nxla = nxla;
+		lmdesc++;
+	}
+
+	lmdesc->header = 0;
+	lmdesc->nxla = channel->lmdesc.base_dma;
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * Descriptors preparation
+ */
+
+static void rz_dmac_lmdesc_recycle(struct rz_dmac_chan *channel)
+{
+	struct rz_lmdesc *lmdesc = channel->lmdesc.head;
+
+	while (!(lmdesc->header & HEADER_LV)) {
+		lmdesc->header = 0;
+		lmdesc++;
+		if (lmdesc >= (channel->lmdesc.base + DMAC_NR_LMDESC))
+			lmdesc = channel->lmdesc.base;
+	}
+	channel->lmdesc.head = lmdesc;
+}
+
+static void rz_dmac_enable_hw(struct rz_dmac_chan *channel)
+{
+	struct dma_chan *chan = &channel->vc.chan;
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	unsigned long flags;
+	u32 nxla;
+	u32 chctrl;
+	u32 chstat;
+
+	dev_dbg(dmac->dev, "%s channel %d\n", __func__, channel->index);
+
+	local_irq_save(flags);
+
+	rz_dmac_lmdesc_recycle(channel);
+
+	nxla = channel->lmdesc.base_dma +
+		(sizeof(struct rz_lmdesc) * (channel->lmdesc.head -
+					     channel->lmdesc.base));
+
+	chstat = rz_dmac_ch_readl(channel, CHSTAT, 1);
+	if (!(chstat & CHSTAT_EN)) {
+		chctrl = (channel->chctrl | CHCTRL_SETEN);
+		rz_dmac_ch_writel(channel, nxla, NXLA, 1);
+		rz_dmac_ch_writel(channel, channel->chcfg, CHCFG, 1);
+		rz_dmac_ch_writel(channel, CHCTRL_SWRST, CHCTRL, 1);
+		rz_dmac_ch_writel(channel, chctrl, CHCTRL, 1);
+	}
+
+	local_irq_restore(flags);
+}
+
+static void rz_dmac_disable_hw(struct rz_dmac_chan *channel)
+{
+	struct dma_chan *chan = &channel->vc.chan;
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	unsigned long flags;
+
+	dev_dbg(dmac->dev, "%s channel %d\n", __func__, channel->index);
+
+	local_irq_save(flags);
+	rz_dmac_ch_writel(channel, CHCTRL_DEFAULT, CHCTRL, 1);
+	local_irq_restore(flags);
+}
+
+static void rz_dmac_set_dmars_register(struct rz_dmac *dmac, int nr, u32 dmars)
+{
+	u32 dmars_offset = (nr / 2) * 4;
+	u32 shift = (nr % 2) * 16;
+	u32 dmars32;
+
+	dmars32 = rz_dmac_ext_readl(dmac, dmars_offset);
+	dmars32 &= ~(0xffff << shift);
+	dmars32 |= dmars << shift;
+
+	rz_dmac_ext_writel(dmac, dmars32, dmars_offset);
+}
+
+static void rz_dmac_prepare_desc_for_memcpy(struct rz_dmac_chan *channel)
+{
+	struct dma_chan *chan = &channel->vc.chan;
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct rz_lmdesc *lmdesc = channel->lmdesc.tail;
+	struct rz_dmac_desc *d = channel->desc;
+	u32 chcfg = CHCFG_MEM_COPY;
+
+	/* prepare descriptor */
+	lmdesc->sa = d->src;
+	lmdesc->da = d->dest;
+	lmdesc->tb = d->len;
+	lmdesc->chcfg = chcfg;
+	lmdesc->chitvl = 0;
+	lmdesc->chext = 0;
+	lmdesc->header = HEADER_LV;
+
+	rz_dmac_set_dmars_register(dmac, channel->index, 0);
+
+	channel->chcfg = chcfg;
+	channel->chctrl = CHCTRL_STG | CHCTRL_SETEN;
+}
+
+static void rz_dmac_prepare_descs_for_slave_sg(struct rz_dmac_chan *channel)
+{
+	struct dma_chan *chan = &channel->vc.chan;
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct rz_dmac_desc *d = channel->desc;
+	struct scatterlist *sg, *sgl = d->sg;
+	struct rz_lmdesc *lmdesc;
+	unsigned int i, sg_len = d->sgcount;
+
+	channel->chcfg |= CHCFG_SEL(channel->index) | CHCFG_DEM | CHCFG_DMS;
+
+	if (d->direction == DMA_DEV_TO_MEM) {
+		channel->chcfg |= CHCFG_SAD;
+		channel->chcfg &= ~CHCFG_REQD;
+	} else {
+		channel->chcfg |= CHCFG_DAD | CHCFG_REQD;
+	}
+
+	lmdesc = channel->lmdesc.tail;
+
+	for (i = 0, sg = sgl; i < sg_len; i++, sg = sg_next(sg)) {
+		if (d->direction == DMA_DEV_TO_MEM) {
+			lmdesc->sa = channel->src_per_address;
+			lmdesc->da = sg_dma_address(sg);
+		} else {
+			lmdesc->sa = sg_dma_address(sg);
+			lmdesc->da = channel->dst_per_address;
+		}
+
+		lmdesc->tb = sg_dma_len(sg);
+		lmdesc->chitvl = 0;
+		lmdesc->chext = 0;
+		if (i == (sg_len - 1)) {
+			lmdesc->chcfg = (channel->chcfg & ~CHCFG_DEM);
+			lmdesc->header = HEADER_LV;
+		} else {
+			lmdesc->chcfg = channel->chcfg;
+			lmdesc->header = HEADER_LV;
+		}
+		if (++lmdesc >= (channel->lmdesc.base + DMAC_NR_LMDESC))
+			lmdesc = channel->lmdesc.base;
+	}
+
+	channel->lmdesc.tail = lmdesc;
+
+	rz_dmac_set_dmars_register(dmac, channel->index, channel->mid_rid);
+	channel->chctrl = CHCTRL_SETEN;
+}
+
+static int rz_dmac_xfer_desc(struct rz_dmac_chan *chan)
+{
+	struct rz_dmac_desc *d = chan->desc;
+	struct virt_dma_desc *vd;
+
+	vd = vchan_next_desc(&chan->vc);
+	if (!vd)
+		return 0;
+
+	list_del(&vd->node);
+
+	switch (d->type) {
+	case RZ_DMAC_DESC_MEMCPY:
+		rz_dmac_prepare_desc_for_memcpy(chan);
+		break;
+
+	case RZ_DMAC_DESC_SLAVE_SG:
+		rz_dmac_prepare_descs_for_slave_sg(chan);
+		break;
+
+	default:
+		return -EINVAL;
+	}
+
+	rz_dmac_enable_hw(chan);
+
+	return 0;
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * DMA engine operations
+ */
+
+static int rz_dmac_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+
+	while (channel->descs_allocated < RZ_DMAC_MAX_CHAN_DESCRIPTORS) {
+		struct rz_dmac_desc *desc;
+
+		desc = kzalloc(sizeof(*desc), GFP_KERNEL);
+		if (!desc)
+			break;
+
+		list_add_tail(&desc->node, &channel->ld_free);
+		channel->descs_allocated++;
+	}
+
+	if (!channel->descs_allocated)
+		return -ENOMEM;
+
+	return channel->descs_allocated;
+}
+
+static void rz_dmac_free_chan_resources(struct dma_chan *chan)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct rz_lmdesc *lmdesc = channel->lmdesc.base;
+	struct rz_dmac_desc *desc, *_desc;
+	unsigned long flags;
+	unsigned int i;
+
+	spin_lock_irqsave(&channel->vc.lock, flags);
+
+	for (i = 0; i < DMAC_NR_LMDESC; i++)
+		lmdesc[i].header = 0;
+
+	rz_dmac_disable_hw(channel);
+	list_splice_tail_init(&channel->ld_active, &channel->ld_free);
+	list_splice_tail_init(&channel->ld_queue, &channel->ld_free);
+
+	if (channel->mid_rid >= 0) {
+		clear_bit(channel->mid_rid, dmac->modules);
+		channel->mid_rid = -EINVAL;
+	}
+
+	spin_unlock_irqrestore(&channel->vc.lock, flags);
+
+	list_for_each_entry_safe(desc, _desc, &channel->ld_free, node) {
+		kfree(desc);
+		channel->descs_allocated--;
+	}
+
+	INIT_LIST_HEAD(&channel->ld_free);
+	vchan_free_chan_resources(&channel->vc);
+}
+
+static struct dma_async_tx_descriptor *
+rz_dmac_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+			size_t len, unsigned long flags)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct rz_dmac_desc *desc;
+
+	dev_dbg(dmac->dev, "%s channel: %d src=0x%pad dst=0x%pad len=%zu\n",
+		__func__, channel->index, &src, &dest, len);
+
+	if (list_empty(&channel->ld_free))
+		return NULL;
+
+	desc = list_first_entry(&channel->ld_free, struct rz_dmac_desc, node);
+
+	desc->type = RZ_DMAC_DESC_MEMCPY;
+	desc->src = src;
+	desc->dest = dest;
+	desc->len = len;
+	desc->direction = DMA_MEM_TO_MEM;
+
+	list_move_tail(channel->ld_free.next, &channel->ld_queue);
+	return vchan_tx_prep(&channel->vc, &desc->vd, flags);
+}
+
+static struct dma_async_tx_descriptor *
+rz_dmac_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		      unsigned int sg_len,
+		      enum dma_transfer_direction direction,
+		      unsigned long flags, void *context)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_dmac_desc *desc;
+	struct scatterlist *sg;
+	int dma_length = 0;
+	int i = 0;
+
+	if (list_empty(&channel->ld_free))
+		return NULL;
+
+	desc = list_first_entry(&channel->ld_free, struct rz_dmac_desc, node);
+
+	for_each_sg(sgl, sg, sg_len, i) {
+		dma_length += sg_dma_len(sg);
+	}
+
+	desc->type = RZ_DMAC_DESC_SLAVE_SG;
+	desc->sg = sgl;
+	desc->sgcount = sg_len;
+	desc->len = dma_length;
+	desc->direction = direction;
+
+	if (direction == DMA_DEV_TO_MEM)
+		desc->src = channel->src_per_address;
+	else
+		desc->dest = channel->dst_per_address;
+
+	list_move_tail(channel->ld_free.next, &channel->ld_queue);
+	return vchan_tx_prep(&channel->vc, &desc->vd, flags);
+}
+
+static int rz_dmac_terminate_all(struct dma_chan *chan)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	unsigned long flags;
+	LIST_HEAD(head);
+
+	rz_dmac_disable_hw(channel);
+	spin_lock_irqsave(&channel->vc.lock, flags);
+	list_splice_tail_init(&channel->ld_active, &channel->ld_free);
+	list_splice_tail_init(&channel->ld_queue, &channel->ld_free);
+	spin_unlock_irqrestore(&channel->vc.lock, flags);
+	vchan_get_all_descriptors(&channel->vc, &head);
+	vchan_dma_desc_free_list(&channel->vc, &head);
+
+	return 0;
+}
+
+static void rz_dmac_issue_pending(struct dma_chan *chan)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct rz_dmac_desc *desc;
+	unsigned long flags;
+
+	spin_lock_irqsave(&channel->vc.lock, flags);
+
+	if (!list_empty(&channel->ld_queue)) {
+		desc = list_first_entry(&channel->ld_queue,
+					struct rz_dmac_desc, node);
+		channel->desc = desc;
+		if (vchan_issue_pending(&channel->vc)) {
+			if (rz_dmac_xfer_desc(channel) < 0)
+				dev_warn(dmac->dev, "ch: %d couldn't issue DMA xfer\n",
+					 channel->index);
+			else
+				list_move_tail(channel->ld_queue.next,
+					       &channel->ld_active);
+		}
+	}
+
+	spin_unlock_irqrestore(&channel->vc.lock, flags);
+}
+
+static u8 rz_dmac_ds_to_val_mapping(enum dma_slave_buswidth ds)
+{
+	u8 i;
+	const enum dma_slave_buswidth ds_lut[] = {
+		DMA_SLAVE_BUSWIDTH_1_BYTE,
+		DMA_SLAVE_BUSWIDTH_2_BYTES,
+		DMA_SLAVE_BUSWIDTH_4_BYTES,
+		DMA_SLAVE_BUSWIDTH_8_BYTES,
+		DMA_SLAVE_BUSWIDTH_16_BYTES,
+		DMA_SLAVE_BUSWIDTH_32_BYTES,
+		DMA_SLAVE_BUSWIDTH_64_BYTES,
+		DMA_SLAVE_BUSWIDTH_128_BYTES,
+	};
+
+	for (i = 0; i < ARRAY_SIZE(ds_lut); i++) {
+		if (ds_lut[i] == ds)
+			return i;
+	}
+
+	return CHCFG_DS_INVALID;
+}
+
+static int rz_dmac_config(struct dma_chan *chan,
+			  struct dma_slave_config *config)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	u32 val;
+
+	channel->src_per_address = config->src_addr;
+	channel->src_word_size = config->src_addr_width;
+	channel->dst_per_address = config->dst_addr;
+	channel->dst_word_size = config->dst_addr_width;
+
+	val = rz_dmac_ds_to_val_mapping(config->dst_addr_width);
+	if (val == CHCFG_DS_INVALID)
+		return -EINVAL;
+
+	channel->chcfg |= CHCFG_FILL_DDS(val);
+
+	val = rz_dmac_ds_to_val_mapping(config->src_addr_width);
+	if (val == CHCFG_DS_INVALID)
+		return -EINVAL;
+
+	channel->chcfg |= CHCFG_FILL_SDS(val);
+
+	return 0;
+}
+
+static void rz_dmac_virt_desc_free(struct virt_dma_desc *vd)
+{
+	/*
+	 * Place holder
+	 * Descriptor allocation is done during alloc_chan_resources and
+	 * get freed during free_chan_resources.
+	 * list is used to manage the descriptors and avoid any memory
+	 * allocation/free during DMA read/write.
+	 */
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * IRQ handling
+ */
+
+static void rz_dmac_irq_handle_channel(struct rz_dmac_chan *channel)
+{
+	struct dma_chan *chan = &channel->vc.chan;
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	u32 chstat, chctrl;
+
+	chstat = rz_dmac_ch_readl(channel, CHSTAT, 1);
+	if (chstat & CHSTAT_ER) {
+		dev_err(dmac->dev, "DMAC err CHSTAT_%d = %08X\n",
+			channel->index, chstat);
+		rz_dmac_ch_writel(channel, CHCTRL_DEFAULT, CHCTRL, 1);
+		goto done;
+	}
+
+	chctrl = rz_dmac_ch_readl(channel, CHCTRL, 1);
+	rz_dmac_ch_writel(channel, chctrl | CHCTRL_CLREND, CHCTRL, 1);
+done:
+	return;
+}
+
+static irqreturn_t rz_dmac_irq_handler(int irq, void *dev_id)
+{
+	struct rz_dmac_chan *channel = dev_id;
+
+	if (channel) {
+		rz_dmac_irq_handle_channel(channel);
+		return IRQ_WAKE_THREAD;
+	}
+	/* handle DMAERR irq */
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t rz_dmac_irq_handler_thread(int irq, void *dev_id)
+{
+	struct rz_dmac_chan *channel = dev_id;
+	struct rz_dmac_desc *desc = NULL;
+	unsigned long flags;
+
+	spin_lock_irqsave(&channel->vc.lock, flags);
+
+	if (list_empty(&channel->ld_active)) {
+		/* Someone might have called terminate all */
+		goto out;
+	}
+
+	desc = list_first_entry(&channel->ld_active, struct rz_dmac_desc, node);
+	vchan_cookie_complete(&desc->vd);
+	list_move_tail(channel->ld_active.next, &channel->ld_free);
+	if (!list_empty(&channel->ld_queue)) {
+		desc = list_first_entry(&channel->ld_queue, struct rz_dmac_desc,
+					node);
+		channel->desc = desc;
+		if (rz_dmac_xfer_desc(channel) == 0)
+			list_move_tail(channel->ld_queue.next, &channel->ld_active);
+	}
+out:
+	spin_unlock_irqrestore(&channel->vc.lock, flags);
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * OF xlate and channel filter
+ */
+
+static bool rz_dmac_chan_filter(struct dma_chan *chan, void *arg)
+{
+	struct rz_dmac_chan *channel = to_rz_dmac_chan(chan);
+	struct rz_dmac *dmac = to_rz_dmac(chan->device);
+	struct of_phandle_args *dma_spec = arg;
+	u32 ch_cfg;
+
+	channel->mid_rid = dma_spec->args[0] & MID_RID_MASK;
+	ch_cfg = (dma_spec->args[0] & CHCFG_MASK) >> 10;
+	channel->chcfg = CHCFG_FILL_TM(ch_cfg) | CHCFG_FILL_AM(ch_cfg) |
+			 CHCFG_FILL_LVL(ch_cfg) | CHCFG_FILL_HIEN(ch_cfg);
+
+	return !test_and_set_bit(channel->mid_rid, dmac->modules);
+}
+
+static struct dma_chan *rz_dmac_of_xlate(struct of_phandle_args *dma_spec,
+					 struct of_dma *ofdma)
+{
+	dma_cap_mask_t mask;
+
+	if (dma_spec->args_count != 1)
+		return NULL;
+
+	/* Only slave DMA channels can be allocated via DT */
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_SLAVE, mask);
+
+	return dma_request_channel(mask, rz_dmac_chan_filter, dma_spec);
+}
+
+/*
+ * -----------------------------------------------------------------------------
+ * Probe and remove
+ */
+
+static int rz_dmac_chan_probe(struct rz_dmac *dmac,
+			      struct rz_dmac_chan *channel,
+			      unsigned int index)
+{
+	struct platform_device *pdev = to_platform_device(dmac->dev);
+	struct rz_lmdesc *lmdesc;
+	char pdev_irqname[5];
+	char *irqname;
+	int ret;
+
+	channel->index = index;
+	channel->mid_rid = -EINVAL;
+
+	/* Request the channel interrupt. */
+	sprintf(pdev_irqname, "ch%u", index);
+	channel->irq = platform_get_irq_byname(pdev, pdev_irqname);
+	if (channel->irq < 0)
+		return channel->irq;
+
+	irqname = devm_kasprintf(dmac->dev, GFP_KERNEL, "%s:%u",
+				 dev_name(dmac->dev), index);
+	if (!irqname)
+		return -ENOMEM;
+
+	ret = devm_request_threaded_irq(dmac->dev, channel->irq,
+					rz_dmac_irq_handler,
+					rz_dmac_irq_handler_thread, 0,
+					irqname, channel);
+	if (ret) {
+		dev_err(dmac->dev, "failed to request IRQ %u (%d)\n",
+			channel->irq, ret);
+		return ret;
+	}
+
+	/* Set io base address for each channel */
+	if (index < 8) {
+		channel->ch_base = dmac->base + CHANNEL_0_7_OFFSET +
+			EACH_CHANNEL_OFFSET * index;
+		channel->ch_cmn_base = dmac->base + CHANNEL_0_7_COMMON_BASE;
+	} else {
+		channel->ch_base = dmac->base + CHANNEL_8_15_OFFSET +
+			EACH_CHANNEL_OFFSET * (index - 8);
+		channel->ch_cmn_base = dmac->base + CHANNEL_8_15_COMMON_BASE;
+	}
+
+	/* Allocate descriptors */
+	lmdesc = dma_alloc_coherent(&pdev->dev,
+				    sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
+				    &channel->lmdesc.base_dma, GFP_KERNEL);
+	if (!lmdesc) {
+		dev_err(&pdev->dev, "Can't allocate memory (lmdesc)\n");
+		return -ENOMEM;
+	}
+	rz_lmdesc_setup(channel, lmdesc);
+
+	/* Initialize register for each channel */
+	rz_dmac_ch_writel(channel, CHCTRL_DEFAULT, CHCTRL, 1);
+
+	channel->vc.desc_free = rz_dmac_virt_desc_free;
+	vchan_init(&channel->vc, &dmac->engine);
+	INIT_LIST_HEAD(&channel->ld_queue);
+	INIT_LIST_HEAD(&channel->ld_free);
+	INIT_LIST_HEAD(&channel->ld_active);
+
+	return 0;
+}
+
+static int rz_dmac_parse_of(struct device *dev, struct rz_dmac *dmac)
+{
+	struct device_node *np = dev->of_node;
+	int ret;
+
+	ret = of_property_read_u32(np, "dma-channels", &dmac->n_channels);
+	if (ret < 0) {
+		dev_err(dev, "unable to read dma-channels property\n");
+		return ret;
+	}
+
+	if (!dmac->n_channels || dmac->n_channels > RZ_DMAC_MAX_CHANNELS) {
+		dev_err(dev, "invalid number of channels %u\n", dmac->n_channels);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int rz_dmac_probe(struct platform_device *pdev)
+{
+	const char *irqname = "error";
+	struct dma_device *engine;
+	struct rz_dmac *dmac;
+	int channel_num;
+	unsigned int i;
+	int ret;
+	int irq;
+
+	dmac = devm_kzalloc(&pdev->dev, sizeof(*dmac), GFP_KERNEL);
+	if (!dmac)
+		return -ENOMEM;
+
+	dmac->dev = &pdev->dev;
+	platform_set_drvdata(pdev, dmac);
+
+	ret = rz_dmac_parse_of(&pdev->dev, dmac);
+	if (ret < 0)
+		return ret;
+
+	dmac->channels = devm_kcalloc(&pdev->dev, dmac->n_channels,
+				      sizeof(*dmac->channels), GFP_KERNEL);
+	if (!dmac->channels)
+		return -ENOMEM;
+
+	/* Request resources */
+	dmac->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(dmac->base))
+		return PTR_ERR(dmac->base);
+
+	dmac->ext_base = devm_platform_ioremap_resource(pdev, 1);
+	if (IS_ERR(dmac->ext_base))
+		return PTR_ERR(dmac->ext_base);
+
+	/* Register interrupt handler for error */
+	irq = platform_get_irq_byname(pdev, irqname);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(&pdev->dev, irq, rz_dmac_irq_handler, 0,
+			       irqname, NULL);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request IRQ %u (%d)\n",
+			irq, ret);
+		return ret;
+	}
+
+	/* Initialize the channels. */
+	INIT_LIST_HEAD(&dmac->engine.channels);
+
+	for (i = 0; i < dmac->n_channels; i++) {
+		ret = rz_dmac_chan_probe(dmac, &dmac->channels[i], i);
+		if (ret < 0)
+			goto err;
+	}
+
+	/* Register the DMAC as a DMA provider for DT. */
+	ret = of_dma_controller_register(pdev->dev.of_node, rz_dmac_of_xlate,
+					 NULL);
+	if (ret < 0)
+		goto err;
+
+	/* Register the DMA engine device. */
+	engine = &dmac->engine;
+	dma_cap_set(DMA_SLAVE, engine->cap_mask);
+	dma_cap_set(DMA_MEMCPY, engine->cap_mask);
+	rz_dmac_writel(dmac, DCTRL_DEFAULT, CHANNEL_0_7_COMMON_BASE + DCTRL);
+	rz_dmac_writel(dmac, DCTRL_DEFAULT, CHANNEL_8_15_COMMON_BASE + DCTRL);
+
+	engine->dev = &pdev->dev;
+
+	engine->device_alloc_chan_resources = rz_dmac_alloc_chan_resources;
+	engine->device_free_chan_resources = rz_dmac_free_chan_resources;
+	engine->device_tx_status = dma_cookie_status;
+	engine->device_prep_slave_sg = rz_dmac_prep_slave_sg;
+	engine->device_prep_dma_memcpy = rz_dmac_prep_dma_memcpy;
+	engine->device_config = rz_dmac_config;
+	engine->device_terminate_all = rz_dmac_terminate_all;
+	engine->device_issue_pending = rz_dmac_issue_pending;
+
+	engine->copy_align = DMAENGINE_ALIGN_1_BYTE;
+	dma_set_max_seg_size(engine->dev, U32_MAX);
+
+	ret = dma_async_device_register(engine);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "unable to register\n");
+		goto dma_register_err;
+	}
+	return 0;
+
+dma_register_err:
+	of_dma_controller_free(pdev->dev.of_node);
+err:
+	channel_num = i ? i - 1 : 0;
+	for (i = 0; i < channel_num; i++) {
+		struct rz_dmac_chan *channel = &dmac->channels[i];
+
+		dma_free_coherent(&pdev->dev,
+				  sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
+				  channel->lmdesc.base,
+				  channel->lmdesc.base_dma);
+	}
+
+	return ret;
+}
+
+static int rz_dmac_remove(struct platform_device *pdev)
+{
+	struct rz_dmac *dmac = platform_get_drvdata(pdev);
+	unsigned int i;
+
+	for (i = 0; i < dmac->n_channels; i++) {
+		struct rz_dmac_chan *channel = &dmac->channels[i];
+
+		dma_free_coherent(&pdev->dev,
+				  sizeof(struct rz_lmdesc) * DMAC_NR_LMDESC,
+				  channel->lmdesc.base,
+				  channel->lmdesc.base_dma);
+	}
+	of_dma_controller_free(pdev->dev.of_node);
+	dma_async_device_unregister(&dmac->engine);
+
+	return 0;
+}
+
+static const struct of_device_id of_rz_dmac_match[] = {
+	{ .compatible = "renesas,rz-dmac", },
+	{ /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, of_rz_dmac_match);
+
+static struct platform_driver rz_dmac_driver = {
+	.driver		= {
+		.name	= "rz-dmac",
+		.of_match_table = of_rz_dmac_match,
+	},
+	.probe		= rz_dmac_probe,
+	.remove		= rz_dmac_remove,
+};
+
+module_platform_driver(rz_dmac_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/G2L DMA Controller Driver");
+MODULE_AUTHOR("Biju Das <biju.das.jz@bp.renesas.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/dma/sh/usb-dmac.c b/drivers/dma/sh/usb-dmac.c
index 1cc06900153e..5edaeb89d1e6 100644
--- a/drivers/dma/sh/usb-dmac.c
+++ b/drivers/dma/sh/usb-dmac.c
@@ -466,7 +466,7 @@ static int usb_dmac_chan_terminate_all(struct dma_chan *chan)
 
 static unsigned int usb_dmac_get_current_residue(struct usb_dmac_chan *chan,
 						 struct usb_dmac_desc *desc,
-						 int sg_index)
+						 unsigned int sg_index)
 {
 	struct usb_dmac_sg *sg = desc->sg + sg_index;
 	u32 mem_addr = sg->mem_addr & 0xffffffff;
diff --git a/drivers/dma/sprd-dma.c b/drivers/dma/sprd-dma.c
index 0ef5ca81ba4d..4357d2395e6b 100644
--- a/drivers/dma/sprd-dma.c
+++ b/drivers/dma/sprd-dma.c
@@ -1265,6 +1265,7 @@ static const struct of_device_id sprd_dma_match[] = {
 	{ .compatible = "sprd,sc9860-dma", },
 	{},
 };
+MODULE_DEVICE_TABLE(of, sprd_dma_match);
 
 static int __maybe_unused sprd_dma_runtime_suspend(struct device *dev)
 {
diff --git a/drivers/dma/stm32-dma.c b/drivers/dma/stm32-dma.c
index 7dd1d3d0bf06..9063c727962e 100644
--- a/drivers/dma/stm32-dma.c
+++ b/drivers/dma/stm32-dma.c
@@ -60,6 +60,7 @@
 #define STM32_DMA_SCR_PSIZE_GET(n)	((n & STM32_DMA_SCR_PSIZE_MASK) >> 11)
 #define STM32_DMA_SCR_DIR_MASK		GENMASK(7, 6)
 #define STM32_DMA_SCR_DIR(n)		((n & 0x3) << 6)
+#define STM32_DMA_SCR_TRBUFF		BIT(20) /* Bufferable transfer for USART/UART */
 #define STM32_DMA_SCR_CT		BIT(19) /* Target in double buffer */
 #define STM32_DMA_SCR_DBM		BIT(18) /* Double Buffer Mode */
 #define STM32_DMA_SCR_PINCOS		BIT(15) /* Peripheral inc offset size */
@@ -138,8 +139,9 @@
 #define STM32_DMA_THRESHOLD_FTR_MASK	GENMASK(1, 0)
 #define STM32_DMA_THRESHOLD_FTR_GET(n)	((n) & STM32_DMA_THRESHOLD_FTR_MASK)
 #define STM32_DMA_DIRECT_MODE_MASK	BIT(2)
-#define STM32_DMA_DIRECT_MODE_GET(n)	(((n) & STM32_DMA_DIRECT_MODE_MASK) \
-					 >> 2)
+#define STM32_DMA_DIRECT_MODE_GET(n)	(((n) & STM32_DMA_DIRECT_MODE_MASK) >> 2)
+#define STM32_DMA_ALT_ACK_MODE_MASK	BIT(4)
+#define STM32_DMA_ALT_ACK_MODE_GET(n)	(((n) & STM32_DMA_ALT_ACK_MODE_MASK) >> 4)
 
 enum stm32_dma_width {
 	STM32_DMA_BYTE,
@@ -1252,6 +1254,8 @@ static void stm32_dma_set_config(struct stm32_dma_chan *chan,
 	chan->threshold = STM32_DMA_THRESHOLD_FTR_GET(cfg->features);
 	if (STM32_DMA_DIRECT_MODE_GET(cfg->features))
 		chan->threshold = STM32_DMA_FIFO_THRESHOLD_NONE;
+	if (STM32_DMA_ALT_ACK_MODE_GET(cfg->features))
+		chan->chan_reg.dma_scr |= STM32_DMA_SCR_TRBUFF;
 }
 
 static struct dma_chan *stm32_dma_of_xlate(struct of_phandle_args *dma_spec,
diff --git a/drivers/dma/tegra210-adma.c b/drivers/dma/tegra210-adma.c
index 4735742e826d..b1115a6d1935 100644
--- a/drivers/dma/tegra210-adma.c
+++ b/drivers/dma/tegra210-adma.c
@@ -655,9 +655,8 @@ static int tegra_adma_alloc_chan_resources(struct dma_chan *dc)
 		return ret;
 	}
 
-	ret = pm_runtime_get_sync(tdc2dev(tdc));
+	ret = pm_runtime_resume_and_get(tdc2dev(tdc));
 	if (ret < 0) {
-		pm_runtime_put_noidle(tdc2dev(tdc));
 		free_irq(tdc->irq, tdc);
 		return ret;
 	}
@@ -869,10 +868,8 @@ static int tegra_adma_probe(struct platform_device *pdev)
 	pm_runtime_enable(&pdev->dev);
 
 	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(&pdev->dev);
+	if (ret < 0)
 		goto rpm_disable;
-	}
 
 	ret = tegra_adma_init(tdma);
 	if (ret)
diff --git a/drivers/dma/ti/k3-psil-j721e.c b/drivers/dma/ti/k3-psil-j721e.c
index 7580870ed746..34e3fc565a37 100644
--- a/drivers/dma/ti/k3-psil-j721e.c
+++ b/drivers/dma/ti/k3-psil-j721e.c
@@ -58,6 +58,14 @@
 		},					\
 	}
 
+#define PSIL_CSI2RX(x)					\
+	{						\
+		.thread_id = x,				\
+		.ep_config = {				\
+			.ep_type = PSIL_EP_NATIVE,	\
+		},					\
+	}
+
 /* PSI-L source thread IDs, used for RX (DMA_DEV_TO_MEM) */
 static struct psil_ep j721e_src_ep_map[] = {
 	/* SA2UL */
@@ -138,6 +146,71 @@ static struct psil_ep j721e_src_ep_map[] = {
 	PSIL_PDMA_XY_PKT(0x4707),
 	PSIL_PDMA_XY_PKT(0x4708),
 	PSIL_PDMA_XY_PKT(0x4709),
+	/* CSI2RX */
+	PSIL_CSI2RX(0x4940),
+	PSIL_CSI2RX(0x4941),
+	PSIL_CSI2RX(0x4942),
+	PSIL_CSI2RX(0x4943),
+	PSIL_CSI2RX(0x4944),
+	PSIL_CSI2RX(0x4945),
+	PSIL_CSI2RX(0x4946),
+	PSIL_CSI2RX(0x4947),
+	PSIL_CSI2RX(0x4948),
+	PSIL_CSI2RX(0x4949),
+	PSIL_CSI2RX(0x494a),
+	PSIL_CSI2RX(0x494b),
+	PSIL_CSI2RX(0x494c),
+	PSIL_CSI2RX(0x494d),
+	PSIL_CSI2RX(0x494e),
+	PSIL_CSI2RX(0x494f),
+	PSIL_CSI2RX(0x4950),
+	PSIL_CSI2RX(0x4951),
+	PSIL_CSI2RX(0x4952),
+	PSIL_CSI2RX(0x4953),
+	PSIL_CSI2RX(0x4954),
+	PSIL_CSI2RX(0x4955),
+	PSIL_CSI2RX(0x4956),
+	PSIL_CSI2RX(0x4957),
+	PSIL_CSI2RX(0x4958),
+	PSIL_CSI2RX(0x4959),
+	PSIL_CSI2RX(0x495a),
+	PSIL_CSI2RX(0x495b),
+	PSIL_CSI2RX(0x495c),
+	PSIL_CSI2RX(0x495d),
+	PSIL_CSI2RX(0x495e),
+	PSIL_CSI2RX(0x495f),
+	PSIL_CSI2RX(0x4960),
+	PSIL_CSI2RX(0x4961),
+	PSIL_CSI2RX(0x4962),
+	PSIL_CSI2RX(0x4963),
+	PSIL_CSI2RX(0x4964),
+	PSIL_CSI2RX(0x4965),
+	PSIL_CSI2RX(0x4966),
+	PSIL_CSI2RX(0x4967),
+	PSIL_CSI2RX(0x4968),
+	PSIL_CSI2RX(0x4969),
+	PSIL_CSI2RX(0x496a),
+	PSIL_CSI2RX(0x496b),
+	PSIL_CSI2RX(0x496c),
+	PSIL_CSI2RX(0x496d),
+	PSIL_CSI2RX(0x496e),
+	PSIL_CSI2RX(0x496f),
+	PSIL_CSI2RX(0x4970),
+	PSIL_CSI2RX(0x4971),
+	PSIL_CSI2RX(0x4972),
+	PSIL_CSI2RX(0x4973),
+	PSIL_CSI2RX(0x4974),
+	PSIL_CSI2RX(0x4975),
+	PSIL_CSI2RX(0x4976),
+	PSIL_CSI2RX(0x4977),
+	PSIL_CSI2RX(0x4978),
+	PSIL_CSI2RX(0x4979),
+	PSIL_CSI2RX(0x497a),
+	PSIL_CSI2RX(0x497b),
+	PSIL_CSI2RX(0x497c),
+	PSIL_CSI2RX(0x497d),
+	PSIL_CSI2RX(0x497e),
+	PSIL_CSI2RX(0x497f),
 	/* CPSW9 */
 	PSIL_ETHERNET(0x4a00),
 	/* CPSW0 */
diff --git a/drivers/dma/xilinx/xilinx_dma.c b/drivers/dma/xilinx/xilinx_dma.c
index 4b9530a7bf65..a4450bc95466 100644
--- a/drivers/dma/xilinx/xilinx_dma.c
+++ b/drivers/dma/xilinx/xilinx_dma.c
@@ -1420,8 +1420,7 @@ static void xilinx_vdma_start_transfer(struct xilinx_dma_chan *chan)
 
 	chan->desc_submitcount++;
 	chan->desc_pendingcount--;
-	list_del(&desc->node);
-	list_add_tail(&desc->node, &chan->active_list);
+	list_move_tail(&desc->node, &chan->active_list);
 	if (chan->desc_submitcount == chan->num_frms)
 		chan->desc_submitcount = 0;
 
@@ -1659,6 +1658,17 @@ static void xilinx_dma_issue_pending(struct dma_chan *dchan)
 }
 
 /**
+ * xilinx_dma_device_config - Configure the DMA channel
+ * @dchan: DMA channel
+ * @config: channel configuration
+ */
+static int xilinx_dma_device_config(struct dma_chan *dchan,
+				    struct dma_slave_config *config)
+{
+	return 0;
+}
+
+/**
  * xilinx_dma_complete_descriptor - Mark the active descriptor as complete
  * @chan : xilinx DMA channel
  *
@@ -3077,7 +3087,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 		xdev->ext_addr = false;
 
 	/* Set the dma mask bits */
-	dma_set_mask(xdev->dev, DMA_BIT_MASK(addr_width));
+	dma_set_mask_and_coherent(xdev->dev, DMA_BIT_MASK(addr_width));
 
 	/* Initialize the DMA engine */
 	xdev->common.dev = &pdev->dev;
@@ -3096,6 +3106,7 @@ static int xilinx_dma_probe(struct platform_device *pdev)
 	xdev->common.device_synchronize = xilinx_dma_synchronize;
 	xdev->common.device_tx_status = xilinx_dma_tx_status;
 	xdev->common.device_issue_pending = xilinx_dma_issue_pending;
+	xdev->common.device_config = xilinx_dma_device_config;
 	if (xdev->dma_config->dmatype == XDMA_TYPE_AXIDMA) {
 		dma_cap_set(DMA_CYCLIC, xdev->common.cap_mask);
 		xdev->common.device_prep_slave_sg = xilinx_dma_prep_slave_sg;
diff --git a/drivers/dma/xilinx/zynqmp_dma.c b/drivers/dma/xilinx/zynqmp_dma.c
index 5fecf5aa6e85..97f02f8eb03a 100644
--- a/drivers/dma/xilinx/zynqmp_dma.c
+++ b/drivers/dma/xilinx/zynqmp_dma.c
@@ -434,8 +434,7 @@ static void zynqmp_dma_free_descriptor(struct zynqmp_dma_chan *chan,
 	struct zynqmp_dma_desc_sw *child, *next;
 
 	chan->desc_free_cnt++;
-	list_del(&sdesc->node);
-	list_add_tail(&sdesc->node, &chan->free_list);
+	list_move_tail(&sdesc->node, &chan->free_list);
 	list_for_each_entry_safe(child, next, &sdesc->tx_list, node) {
 		chan->desc_free_cnt++;
 		list_move_tail(&child->node, &chan->free_list);
diff --git a/drivers/firewire/net.c b/drivers/firewire/net.c
index 715e491dfbc3..4c3fd2eed1da 100644
--- a/drivers/firewire/net.c
+++ b/drivers/firewire/net.c
@@ -488,9 +488,7 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 					struct sk_buff *skb, u16 source_node_id,
 					bool is_broadcast, u16 ether_type)
 {
-	struct fwnet_device *dev;
 	int status;
-	__be64 guid;
 
 	switch (ether_type) {
 	case ETH_P_ARP:
@@ -503,7 +501,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 		goto err;
 	}
 
-	dev = netdev_priv(net);
 	/* Write metadata, and then pass to the receive level */
 	skb->dev = net;
 	skb->ip_summed = CHECKSUM_NONE;
@@ -512,7 +509,6 @@ static int fwnet_finish_incoming_packet(struct net_device *net,
 	 * Parse the encapsulation header. This actually does the job of
 	 * converting to an ethernet-like pseudo frame header.
 	 */
-	guid = cpu_to_be64(dev->card->guid);
 	if (dev_hard_header(skb, net, ether_type,
 			   is_broadcast ? net->broadcast : net->dev_addr,
 			   NULL, skb->len) >= 0) {
diff --git a/drivers/firmware/dmi-id.c b/drivers/firmware/dmi-id.c
index 4d5421d14a41..940ddf916202 100644
--- a/drivers/firmware/dmi-id.c
+++ b/drivers/firmware/dmi-id.c
@@ -73,6 +73,10 @@ static void ascii_filter(char *d, const char *s)
 
 static ssize_t get_modalias(char *buffer, size_t buffer_size)
 {
+	/*
+	 * Note new fields need to be added at the end to keep compatibility
+	 * with udev's hwdb which does matches on "`cat dmi/id/modalias`*".
+	 */
 	static const struct mafield {
 		const char *prefix;
 		int field;
@@ -85,13 +89,13 @@ static ssize_t get_modalias(char *buffer, size_t buffer_size)
 		{ "svn", DMI_SYS_VENDOR },
 		{ "pn",  DMI_PRODUCT_NAME },
 		{ "pvr", DMI_PRODUCT_VERSION },
-		{ "sku", DMI_PRODUCT_SKU },
 		{ "rvn", DMI_BOARD_VENDOR },
 		{ "rn",  DMI_BOARD_NAME },
 		{ "rvr", DMI_BOARD_VERSION },
 		{ "cvn", DMI_CHASSIS_VENDOR },
 		{ "ct",  DMI_CHASSIS_TYPE },
 		{ "cvr", DMI_CHASSIS_VERSION },
+		{ "sku", DMI_PRODUCT_SKU },
 		{ NULL,  DMI_NONE }
 	};
 
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index ced1964faf42..2ee97bab7440 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1147,6 +1147,64 @@ int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
 }
 EXPORT_SYMBOL(qcom_scm_qsmmu500_wait_safe_toggle);
 
+bool qcom_scm_lmh_dcvsh_available(void)
+{
+	return __qcom_scm_is_call_available(__scm->dev, QCOM_SCM_SVC_LMH, QCOM_SCM_LMH_LIMIT_DCVSH);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh_available);
+
+int qcom_scm_lmh_profile_change(u32 profile_id)
+{
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_LMH,
+		.cmd = QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE,
+		.arginfo = QCOM_SCM_ARGS(1, QCOM_SCM_VAL),
+		.args[0] = profile_id,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	return qcom_scm_call(__scm->dev, &desc, NULL);
+}
+EXPORT_SYMBOL(qcom_scm_lmh_profile_change);
+
+int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+		       u64 limit_node, u32 node_id, u64 version)
+{
+	dma_addr_t payload_phys;
+	u32 *payload_buf;
+	int ret, payload_size = 5 * sizeof(u32);
+
+	struct qcom_scm_desc desc = {
+		.svc = QCOM_SCM_SVC_LMH,
+		.cmd = QCOM_SCM_LMH_LIMIT_DCVSH,
+		.arginfo = QCOM_SCM_ARGS(5, QCOM_SCM_RO, QCOM_SCM_VAL, QCOM_SCM_VAL,
+					QCOM_SCM_VAL, QCOM_SCM_VAL),
+		.args[1] = payload_size,
+		.args[2] = limit_node,
+		.args[3] = node_id,
+		.args[4] = version,
+		.owner = ARM_SMCCC_OWNER_SIP,
+	};
+
+	payload_buf = dma_alloc_coherent(__scm->dev, payload_size, &payload_phys, GFP_KERNEL);
+	if (!payload_buf)
+		return -ENOMEM;
+
+	payload_buf[0] = payload_fn;
+	payload_buf[1] = 0;
+	payload_buf[2] = payload_reg;
+	payload_buf[3] = 1;
+	payload_buf[4] = payload_val;
+
+	desc.args[0] = payload_phys;
+
+	ret = qcom_scm_call(__scm->dev, &desc, NULL);
+
+	dma_free_coherent(__scm->dev, payload_size, payload_buf, payload_phys);
+	return ret;
+}
+EXPORT_SYMBOL(qcom_scm_lmh_dcvsh);
+
 static int qcom_scm_find_dload_address(struct device *dev, u64 *addr)
 {
 	struct device_node *tcsr;
diff --git a/drivers/firmware/qcom_scm.h b/drivers/firmware/qcom_scm.h
index 632fe3142462..d92156ceb3ac 100644
--- a/drivers/firmware/qcom_scm.h
+++ b/drivers/firmware/qcom_scm.h
@@ -114,6 +114,10 @@ extern int scm_legacy_call(struct device *dev, const struct qcom_scm_desc *desc,
 #define QCOM_SCM_SVC_HDCP		0x11
 #define QCOM_SCM_HDCP_INVOKE		0x01
 
+#define QCOM_SCM_SVC_LMH			0x13
+#define QCOM_SCM_LMH_LIMIT_PROFILE_CHANGE	0x01
+#define QCOM_SCM_LMH_LIMIT_DCVSH		0x10
+
 #define QCOM_SCM_SVC_SMMU_PROGRAM		0x15
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1		0x03
 #define QCOM_SCM_SMMU_CONFIG_ERRATA1_CLIENT_ALL	0x02
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 81abd890b364..fae5141251e5 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -1018,12 +1018,6 @@ config GPIO_MAX732X_IRQ
 	  Say yes here to enable the max732x to be used as an interrupt
 	  controller. It requires the driver to be built in the kernel.
 
-config GPIO_MC9S08DZ60
-	bool "MX35 3DS BOARD MC9S08DZ60 GPIO functions"
-	depends on I2C=y && MACH_MX35_3DS
-	help
-	  Select this to enable the MC9S08DZ60 GPIO driver
-
 config GPIO_PCA953X
 	tristate "PCA95[357]x, PCA9698, TCA64xx, and MAX7310 I/O ports"
 	select REGMAP_I2C
@@ -1677,6 +1671,15 @@ config GPIO_MOCKUP
 	  tools/testing/selftests/gpio/gpio-mockup.sh. Reference the usage in
 	  it.
 
+config GPIO_VIRTIO
+	tristate "VirtIO GPIO support"
+	depends on VIRTIO
+	help
+	  Say Y here to enable guest support for virtio-based GPIO controllers.
+
+	  These virtual GPIOs can be routed to real GPIOs or attached to
+	  simulators on the host (like QEMU).
+
 endmenu
 
 endif
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 5243e2d1c207..fbcda637d5e1 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -92,7 +92,6 @@ obj-$(CONFIG_GPIO_MAX77620)		+= gpio-max77620.o
 obj-$(CONFIG_GPIO_MAX77650)		+= gpio-max77650.o
 obj-$(CONFIG_GPIO_MB86S7X)		+= gpio-mb86s7x.o
 obj-$(CONFIG_GPIO_MC33880)		+= gpio-mc33880.o
-obj-$(CONFIG_GPIO_MC9S08DZ60)		+= gpio-mc9s08dz60.o
 obj-$(CONFIG_GPIO_MENZ127)		+= gpio-menz127.o
 obj-$(CONFIG_GPIO_MERRIFIELD)		+= gpio-merrifield.o
 obj-$(CONFIG_GPIO_ML_IOH)		+= gpio-ml-ioh.o
@@ -166,6 +165,7 @@ obj-$(CONFIG_GPIO_UCB1400)		+= gpio-ucb1400.o
 obj-$(CONFIG_GPIO_UNIPHIER)		+= gpio-uniphier.o
 obj-$(CONFIG_GPIO_VF610)		+= gpio-vf610.o
 obj-$(CONFIG_GPIO_VIPERBOARD)		+= gpio-viperboard.o
+obj-$(CONFIG_GPIO_VIRTIO)		+= gpio-virtio.o
 obj-$(CONFIG_GPIO_VISCONTI)		+= gpio-visconti.o
 obj-$(CONFIG_GPIO_VR41XX)		+= gpio-vr41xx.o
 obj-$(CONFIG_GPIO_VX855)		+= gpio-vx855.o
diff --git a/drivers/gpio/gpio-aspeed-sgpio.c b/drivers/gpio/gpio-aspeed-sgpio.c
index a99ece15db95..10f303d15225 100644
--- a/drivers/gpio/gpio-aspeed-sgpio.c
+++ b/drivers/gpio/gpio-aspeed-sgpio.c
@@ -17,37 +17,30 @@
 #include <linux/spinlock.h>
 #include <linux/string.h>
 
-/*
- * MAX_NR_HW_GPIO represents the number of actual hardware-supported GPIOs (ie,
- * slots within the clocked serial GPIO data). Since each HW GPIO is both an
- * input and an output, we provide MAX_NR_HW_GPIO * 2 lines on our gpiochip
- * device.
- *
- * We use SGPIO_OUTPUT_OFFSET to define the split between the inputs and
- * outputs; the inputs start at line 0, the outputs start at OUTPUT_OFFSET.
- */
-#define MAX_NR_HW_SGPIO			80
-#define SGPIO_OUTPUT_OFFSET		MAX_NR_HW_SGPIO
-
 #define ASPEED_SGPIO_CTRL		0x54
 
-#define ASPEED_SGPIO_PINS_MASK		GENMASK(9, 6)
 #define ASPEED_SGPIO_CLK_DIV_MASK	GENMASK(31, 16)
 #define ASPEED_SGPIO_ENABLE		BIT(0)
+#define ASPEED_SGPIO_PINS_SHIFT		6
+
+struct aspeed_sgpio_pdata {
+	const u32 pin_mask;
+};
 
 struct aspeed_sgpio {
 	struct gpio_chip chip;
+	struct irq_chip intc;
 	struct clk *pclk;
 	spinlock_t lock;
 	void __iomem *base;
 	int irq;
-	int n_sgpio;
 };
 
 struct aspeed_sgpio_bank {
-	uint16_t    val_regs;
-	uint16_t    rdata_reg;
-	uint16_t    irq_regs;
+	u16    val_regs;
+	u16    rdata_reg;
+	u16    irq_regs;
+	u16    tolerance_regs;
 	const char  names[4][3];
 };
 
@@ -63,19 +56,29 @@ static const struct aspeed_sgpio_bank aspeed_sgpio_banks[] = {
 		.val_regs = 0x0000,
 		.rdata_reg = 0x0070,
 		.irq_regs = 0x0004,
+		.tolerance_regs = 0x0018,
 		.names = { "A", "B", "C", "D" },
 	},
 	{
 		.val_regs = 0x001C,
 		.rdata_reg = 0x0074,
 		.irq_regs = 0x0020,
+		.tolerance_regs = 0x0034,
 		.names = { "E", "F", "G", "H" },
 	},
 	{
 		.val_regs = 0x0038,
 		.rdata_reg = 0x0078,
 		.irq_regs = 0x003C,
-		.names = { "I", "J" },
+		.tolerance_regs = 0x0050,
+		.names = { "I", "J", "K", "L" },
+	},
+	{
+		.val_regs = 0x0090,
+		.rdata_reg = 0x007C,
+		.irq_regs = 0x0094,
+		.tolerance_regs = 0x00A8,
+		.names = { "M", "N", "O", "P" },
 	},
 };
 
@@ -87,6 +90,7 @@ enum aspeed_sgpio_reg {
 	reg_irq_type1,
 	reg_irq_type2,
 	reg_irq_status,
+	reg_tolerance,
 };
 
 #define GPIO_VAL_VALUE      0x00
@@ -115,15 +119,17 @@ static void __iomem *bank_reg(struct aspeed_sgpio *gpio,
 		return gpio->base + bank->irq_regs + GPIO_IRQ_TYPE2;
 	case reg_irq_status:
 		return gpio->base + bank->irq_regs + GPIO_IRQ_STATUS;
+	case reg_tolerance:
+		return gpio->base + bank->tolerance_regs;
 	default:
 		/* acturally if code runs to here, it's an error case */
 		BUG();
 	}
 }
 
-#define GPIO_BANK(x)    ((x % SGPIO_OUTPUT_OFFSET) >> 5)
-#define GPIO_OFFSET(x)  ((x % SGPIO_OUTPUT_OFFSET) & 0x1f)
-#define GPIO_BIT(x)     BIT(GPIO_OFFSET(x))
+#define GPIO_BANK(x)    ((x) >> 6)
+#define GPIO_OFFSET(x)  ((x) & GENMASK(5, 0))
+#define GPIO_BIT(x)     BIT(GPIO_OFFSET(x) >> 1)
 
 static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
 {
@@ -138,39 +144,25 @@ static const struct aspeed_sgpio_bank *to_bank(unsigned int offset)
 static int aspeed_sgpio_init_valid_mask(struct gpio_chip *gc,
 		unsigned long *valid_mask, unsigned int ngpios)
 {
-	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
-	int n = sgpio->n_sgpio;
-	int c = SGPIO_OUTPUT_OFFSET - n;
-
-	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
-
-	/* input GPIOs in the lower range */
-	bitmap_set(valid_mask, 0, n);
-	bitmap_clear(valid_mask, n, c);
-
-	/* output GPIOS above SGPIO_OUTPUT_OFFSET */
-	bitmap_set(valid_mask, SGPIO_OUTPUT_OFFSET, n);
-	bitmap_clear(valid_mask, SGPIO_OUTPUT_OFFSET + n, c);
-
+	bitmap_set(valid_mask, 0, ngpios);
 	return 0;
 }
 
 static void aspeed_sgpio_irq_init_valid_mask(struct gpio_chip *gc,
 		unsigned long *valid_mask, unsigned int ngpios)
 {
-	struct aspeed_sgpio *sgpio = gpiochip_get_data(gc);
-	int n = sgpio->n_sgpio;
+	unsigned int i;
 
-	WARN_ON(ngpios < MAX_NR_HW_SGPIO * 2);
-
-	/* input GPIOs in the lower range */
-	bitmap_set(valid_mask, 0, n);
-	bitmap_clear(valid_mask, n, ngpios - n);
+	/* input GPIOs are even bits */
+	for (i = 0; i < ngpios; i++) {
+		if (i % 2)
+			clear_bit(i, valid_mask);
+	}
 }
 
 static bool aspeed_sgpio_is_input(unsigned int offset)
 {
-	return offset < SGPIO_OUTPUT_OFFSET;
+	return !(offset % 2);
 }
 
 static int aspeed_sgpio_get(struct gpio_chip *gc, unsigned int offset)
@@ -409,14 +401,6 @@ static void aspeed_sgpio_irq_handler(struct irq_desc *desc)
 	chained_irq_exit(ic, desc);
 }
 
-static struct irq_chip aspeed_sgpio_irqchip = {
-	.name       = "aspeed-sgpio",
-	.irq_ack    = aspeed_sgpio_irq_ack,
-	.irq_mask   = aspeed_sgpio_irq_mask,
-	.irq_unmask = aspeed_sgpio_irq_unmask,
-	.irq_set_type   = aspeed_sgpio_set_type,
-};
-
 static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
 				   struct platform_device *pdev)
 {
@@ -439,8 +423,14 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
 		iowrite32(0xffffffff, bank_reg(gpio, bank, reg_irq_status));
 	}
 
+	gpio->intc.name = dev_name(&pdev->dev);
+	gpio->intc.irq_ack = aspeed_sgpio_irq_ack;
+	gpio->intc.irq_mask = aspeed_sgpio_irq_mask;
+	gpio->intc.irq_unmask = aspeed_sgpio_irq_unmask;
+	gpio->intc.irq_set_type = aspeed_sgpio_set_type;
+
 	irq = &gpio->chip.irq;
-	irq->chip = &aspeed_sgpio_irqchip;
+	irq->chip = &gpio->intc;
 	irq->init_valid_mask = aspeed_sgpio_irq_init_valid_mask;
 	irq->handler = handle_bad_irq;
 	irq->default_type = IRQ_TYPE_NONE;
@@ -463,9 +453,56 @@ static int aspeed_sgpio_setup_irqs(struct aspeed_sgpio *gpio,
 	return 0;
 }
 
+static const struct aspeed_sgpio_pdata ast2400_sgpio_pdata = {
+	.pin_mask = GENMASK(9, 6),
+};
+
+static int aspeed_sgpio_reset_tolerance(struct gpio_chip *chip,
+					unsigned int offset, bool enable)
+{
+	struct aspeed_sgpio *gpio = gpiochip_get_data(chip);
+	unsigned long flags;
+	void __iomem *reg;
+	u32 val;
+
+	reg = bank_reg(gpio, to_bank(offset), reg_tolerance);
+
+	spin_lock_irqsave(&gpio->lock, flags);
+
+	val = readl(reg);
+
+	if (enable)
+		val |= GPIO_BIT(offset);
+	else
+		val &= ~GPIO_BIT(offset);
+
+	writel(val, reg);
+
+	spin_unlock_irqrestore(&gpio->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_sgpio_set_config(struct gpio_chip *chip, unsigned int offset,
+				   unsigned long config)
+{
+	unsigned long param = pinconf_to_config_param(config);
+	u32 arg = pinconf_to_config_argument(config);
+
+	if (param == PIN_CONFIG_PERSIST_STATE)
+		return aspeed_sgpio_reset_tolerance(chip, offset, arg);
+
+	return -ENOTSUPP;
+}
+
+static const struct aspeed_sgpio_pdata ast2600_sgpiom_pdata = {
+	.pin_mask = GENMASK(10, 6),
+};
+
 static const struct of_device_id aspeed_sgpio_of_table[] = {
-	{ .compatible = "aspeed,ast2400-sgpio" },
-	{ .compatible = "aspeed,ast2500-sgpio" },
+	{ .compatible = "aspeed,ast2400-sgpio", .data = &ast2400_sgpio_pdata, },
+	{ .compatible = "aspeed,ast2500-sgpio", .data = &ast2400_sgpio_pdata, },
+	{ .compatible = "aspeed,ast2600-sgpiom", .data = &ast2600_sgpiom_pdata, },
 	{}
 };
 
@@ -473,10 +510,11 @@ MODULE_DEVICE_TABLE(of, aspeed_sgpio_of_table);
 
 static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 {
+	u32 nr_gpios, sgpio_freq, sgpio_clk_div, gpio_cnt_regval, pin_mask;
+	const struct aspeed_sgpio_pdata *pdata;
 	struct aspeed_sgpio *gpio;
-	u32 nr_gpios, sgpio_freq, sgpio_clk_div;
-	int rc;
 	unsigned long apb_freq;
+	int rc;
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
@@ -486,18 +524,23 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	if (IS_ERR(gpio->base))
 		return PTR_ERR(gpio->base);
 
-	rc = of_property_read_u32(pdev->dev.of_node, "ngpios", &nr_gpios);
+	pdata = device_get_match_data(&pdev->dev);
+	if (!pdata)
+		return -EINVAL;
+
+	pin_mask = pdata->pin_mask;
+
+	rc = device_property_read_u32(&pdev->dev, "ngpios", &nr_gpios);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Could not read ngpios property\n");
 		return -EINVAL;
-	} else if (nr_gpios > MAX_NR_HW_SGPIO) {
-		dev_err(&pdev->dev, "Number of GPIOs exceeds the maximum of %d: %d\n",
-			MAX_NR_HW_SGPIO, nr_gpios);
+	} else if (nr_gpios % 8) {
+		dev_err(&pdev->dev, "Number of GPIOs not multiple of 8: %d\n",
+			nr_gpios);
 		return -EINVAL;
 	}
-	gpio->n_sgpio = nr_gpios;
 
-	rc = of_property_read_u32(pdev->dev.of_node, "bus-frequency", &sgpio_freq);
+	rc = device_property_read_u32(&pdev->dev, "bus-frequency", &sgpio_freq);
 	if (rc < 0) {
 		dev_err(&pdev->dev, "Could not read bus-frequency property\n");
 		return -EINVAL;
@@ -528,15 +571,14 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	if (sgpio_clk_div > (1 << 16) - 1)
 		return -EINVAL;
 
-	iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) |
-		  FIELD_PREP(ASPEED_SGPIO_PINS_MASK, (nr_gpios / 8)) |
-		  ASPEED_SGPIO_ENABLE,
-		  gpio->base + ASPEED_SGPIO_CTRL);
+	gpio_cnt_regval = ((nr_gpios / 8) << ASPEED_SGPIO_PINS_SHIFT) & pin_mask;
+	iowrite32(FIELD_PREP(ASPEED_SGPIO_CLK_DIV_MASK, sgpio_clk_div) | gpio_cnt_regval |
+		  ASPEED_SGPIO_ENABLE, gpio->base + ASPEED_SGPIO_CTRL);
 
 	spin_lock_init(&gpio->lock);
 
 	gpio->chip.parent = &pdev->dev;
-	gpio->chip.ngpio = MAX_NR_HW_SGPIO * 2;
+	gpio->chip.ngpio = nr_gpios * 2;
 	gpio->chip.init_valid_mask = aspeed_sgpio_init_valid_mask;
 	gpio->chip.direction_input = aspeed_sgpio_dir_in;
 	gpio->chip.direction_output = aspeed_sgpio_dir_out;
@@ -545,7 +587,7 @@ static int __init aspeed_sgpio_probe(struct platform_device *pdev)
 	gpio->chip.free = NULL;
 	gpio->chip.get = aspeed_sgpio_get;
 	gpio->chip.set = aspeed_sgpio_set;
-	gpio->chip.set_config = NULL;
+	gpio->chip.set_config = aspeed_sgpio_set_config;
 	gpio->chip.label = dev_name(&pdev->dev);
 	gpio->chip.base = -1;
 
diff --git a/drivers/gpio/gpio-brcmstb.c b/drivers/gpio/gpio-brcmstb.c
index 74b7c91c3d1a..895a79936248 100644
--- a/drivers/gpio/gpio-brcmstb.c
+++ b/drivers/gpio/gpio-brcmstb.c
@@ -602,49 +602,6 @@ static const struct dev_pm_ops brcmstb_gpio_pm_ops = {
 	.resume_noirq = brcmstb_gpio_resume,
 };
 
-static void brcmstb_gpio_set_names(struct device *dev,
-				   struct brcmstb_gpio_bank *bank)
-{
-	struct device_node *np = dev->of_node;
-	const char **names;
-	int nstrings, base;
-	unsigned int i;
-
-	base = bank->id * MAX_GPIO_PER_BANK;
-
-	nstrings = of_property_count_strings(np, "gpio-line-names");
-	if (nstrings <= base)
-		/* Line names not present */
-		return;
-
-	names = devm_kcalloc(dev, MAX_GPIO_PER_BANK, sizeof(*names),
-			     GFP_KERNEL);
-	if (!names)
-		return;
-
-	/*
-	 * Make sure to not index beyond the end of the number of descriptors
-	 * of the GPIO device.
-	 */
-	for (i = 0; i < bank->width; i++) {
-		const char *name;
-		int ret;
-
-		ret = of_property_read_string_index(np, "gpio-line-names",
-						    base + i, &name);
-		if (ret) {
-			if (ret != -ENODATA)
-				dev_err(dev, "unable to name line %d: %d\n",
-					base + i, ret);
-			break;
-		}
-		if (*name)
-			names[i] = name;
-	}
-
-	bank->gc.names = names;
-}
-
 static int brcmstb_gpio_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -758,6 +715,7 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		gc->of_xlate = brcmstb_gpio_of_xlate;
 		/* not all ngpio lines are valid, will use bank width later */
 		gc->ngpio = MAX_GPIO_PER_BANK;
+		gc->offset = bank->id * MAX_GPIO_PER_BANK;
 		if (priv->parent_irq > 0)
 			gc->to_irq = brcmstb_gpio_to_irq;
 
@@ -768,7 +726,6 @@ static int brcmstb_gpio_probe(struct platform_device *pdev)
 		need_wakeup_event |= !!__brcmstb_gpio_get_active_irqs(bank);
 		gc->write_reg(reg_base + GIO_MASK(bank->id), 0);
 
-		brcmstb_gpio_set_names(dev, bank);
 		err = gpiochip_add_data(gc, bank);
 		if (err) {
 			dev_err(dev, "Could not add gpiochip for bank %d\n",
diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c
index 3eb13d6d31ef..f98fa33e1679 100644
--- a/drivers/gpio/gpio-dwapb.c
+++ b/drivers/gpio/gpio-dwapb.c
@@ -16,7 +16,6 @@
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/of.h>
-#include <linux/platform_data/gpio-dwapb.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>
 #include <linux/reset.h>
@@ -48,6 +47,7 @@
 
 #define DWAPB_DRIVER_NAME	"gpio-dwapb"
 #define DWAPB_MAX_PORTS		4
+#define DWAPB_MAX_GPIOS		32
 
 #define GPIO_EXT_PORT_STRIDE	0x04 /* register stride 32 bits */
 #define GPIO_SWPORT_DR_STRIDE	0x0c /* register stride 3*32 bits */
@@ -65,6 +65,19 @@
 
 struct dwapb_gpio;
 
+struct dwapb_port_property {
+	struct fwnode_handle *fwnode;
+	unsigned int idx;
+	unsigned int ngpio;
+	unsigned int gpio_base;
+	int irq[DWAPB_MAX_GPIOS];
+};
+
+struct dwapb_platform_data {
+	struct dwapb_port_property *properties;
+	unsigned int nports;
+};
+
 #ifdef CONFIG_PM_SLEEP
 /* Store GPIO context across system-wide suspend/resume transitions */
 struct dwapb_context {
@@ -436,21 +449,17 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 	pirq->irqchip.irq_set_wake = dwapb_irq_set_wake;
 #endif
 
-	if (!pp->irq_shared) {
-		girq->num_parents = pirq->nr_irqs;
-		girq->parents = pirq->irq;
-		girq->parent_handler_data = gpio;
-		girq->parent_handler = dwapb_irq_handler;
-	} else {
-		/* This will let us handle the parent IRQ in the driver */
+	/*
+	 * Intel ACPI-based platforms mostly have the DesignWare APB GPIO
+	 * IRQ lane shared between several devices. In that case the parental
+	 * IRQ has to be handled in the shared way so to be properly delivered
+	 * to all the connected devices.
+	 */
+	if (has_acpi_companion(gpio->dev)) {
 		girq->num_parents = 0;
 		girq->parents = NULL;
 		girq->parent_handler = NULL;
 
-		/*
-		 * Request a shared IRQ since where MFD would have devices
-		 * using the same irq pin
-		 */
 		err = devm_request_irq(gpio->dev, pp->irq[0],
 				       dwapb_irq_handler_mfd,
 				       IRQF_SHARED, DWAPB_DRIVER_NAME, gpio);
@@ -458,6 +467,11 @@ static void dwapb_configure_irqs(struct dwapb_gpio *gpio,
 			dev_err(gpio->dev, "error requesting IRQ\n");
 			goto err_kfree_pirq;
 		}
+	} else {
+		girq->num_parents = pirq->nr_irqs;
+		girq->parents = pirq->irq;
+		girq->parent_handler_data = gpio;
+		girq->parent_handler = dwapb_irq_handler;
 	}
 
 	girq->chip = &pirq->irqchip;
@@ -581,9 +595,12 @@ static struct dwapb_platform_data *dwapb_gpio_get_pdata(struct device *dev)
 			pp->ngpio = DWAPB_MAX_GPIOS;
 		}
 
-		pp->irq_shared	= false;
 		pp->gpio_base	= -1;
 
+		/* For internal use only, new platforms mustn't exercise this */
+		if (is_software_node(fwnode))
+			fwnode_property_read_u32(fwnode, "gpio-base", &pp->gpio_base);
+
 		/*
 		 * Only port A can provide interrupts in all configurations of
 		 * the IP.
@@ -670,17 +687,12 @@ static int dwapb_gpio_probe(struct platform_device *pdev)
 	unsigned int i;
 	struct dwapb_gpio *gpio;
 	int err;
+	struct dwapb_platform_data *pdata;
 	struct device *dev = &pdev->dev;
-	struct dwapb_platform_data *pdata = dev_get_platdata(dev);
-
-	if (!pdata) {
-		pdata = dwapb_gpio_get_pdata(dev);
-		if (IS_ERR(pdata))
-			return PTR_ERR(pdata);
-	}
 
-	if (!pdata->nports)
-		return -ENODEV;
+	pdata = dwapb_gpio_get_pdata(dev);
+	if (IS_ERR(pdata))
+		return PTR_ERR(pdata);
 
 	gpio = devm_kzalloc(&pdev->dev, sizeof(*gpio), GFP_KERNEL);
 	if (!gpio)
diff --git a/drivers/gpio/gpio-mc9s08dz60.c b/drivers/gpio/gpio-mc9s08dz60.c
deleted file mode 100644
index a9f17cebd5ed..000000000000
--- a/drivers/gpio/gpio-mc9s08dz60.c
+++ /dev/null
@@ -1,112 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2009-2012 Freescale Semiconductor, Inc. All Rights Reserved.
- *
- * Author: Wu Guoxing <b39297@freescale.com>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/i2c.h>
-#include <linux/gpio/driver.h>
-
-#define GPIO_GROUP_NUM 2
-#define GPIO_NUM_PER_GROUP 8
-#define GPIO_NUM (GPIO_GROUP_NUM*GPIO_NUM_PER_GROUP)
-
-struct mc9s08dz60 {
-	struct i2c_client *client;
-	struct gpio_chip chip;
-};
-
-static void mc9s_gpio_to_reg_and_bit(int offset, u8 *reg, u8 *bit)
-{
-	*reg = 0x20 + offset / GPIO_NUM_PER_GROUP;
-	*bit = offset % GPIO_NUM_PER_GROUP;
-}
-
-static int mc9s08dz60_get_value(struct gpio_chip *gc, unsigned offset)
-{
-	u8 reg, bit;
-	s32 value;
-	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
-
-	mc9s_gpio_to_reg_and_bit(offset, &reg, &bit);
-	value = i2c_smbus_read_byte_data(mc9s->client, reg);
-
-	return (value >= 0) ? (value >> bit) & 0x1 : 0;
-}
-
-static int mc9s08dz60_set(struct mc9s08dz60 *mc9s, unsigned offset, int val)
-{
-	u8 reg, bit;
-	s32 value;
-
-	mc9s_gpio_to_reg_and_bit(offset, &reg, &bit);
-	value = i2c_smbus_read_byte_data(mc9s->client, reg);
-	if (value >= 0) {
-		if (val)
-			value |= 1 << bit;
-		else
-			value &= ~(1 << bit);
-
-		return i2c_smbus_write_byte_data(mc9s->client, reg, value);
-	} else
-		return value;
-
-}
-
-
-static void mc9s08dz60_set_value(struct gpio_chip *gc, unsigned offset, int val)
-{
-	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
-
-	mc9s08dz60_set(mc9s, offset, val);
-}
-
-static int mc9s08dz60_direction_output(struct gpio_chip *gc,
-				       unsigned offset, int val)
-{
-	struct mc9s08dz60 *mc9s = gpiochip_get_data(gc);
-
-	return mc9s08dz60_set(mc9s, offset, val);
-}
-
-static int mc9s08dz60_probe(struct i2c_client *client,
-			    const struct i2c_device_id *id)
-{
-	struct mc9s08dz60 *mc9s;
-
-	mc9s = devm_kzalloc(&client->dev, sizeof(*mc9s), GFP_KERNEL);
-	if (!mc9s)
-		return -ENOMEM;
-
-	mc9s->chip.label = client->name;
-	mc9s->chip.base = -1;
-	mc9s->chip.parent = &client->dev;
-	mc9s->chip.owner = THIS_MODULE;
-	mc9s->chip.ngpio = GPIO_NUM;
-	mc9s->chip.can_sleep = true;
-	mc9s->chip.get = mc9s08dz60_get_value;
-	mc9s->chip.set = mc9s08dz60_set_value;
-	mc9s->chip.direction_output = mc9s08dz60_direction_output;
-	mc9s->client = client;
-	i2c_set_clientdata(client, mc9s);
-
-	return devm_gpiochip_add_data(&client->dev, &mc9s->chip, mc9s);
-}
-
-static const struct i2c_device_id mc9s08dz60_id[] = {
-	{"mc9s08dz60", 0},
-	{},
-};
-
-static struct i2c_driver mc9s08dz60_i2c_driver = {
-	.driver = {
-		.name = "mc9s08dz60",
-	},
-	.probe = mc9s08dz60_probe,
-	.id_table = mc9s08dz60_id,
-};
-builtin_i2c_driver(mc9s08dz60_i2c_driver);
diff --git a/drivers/gpio/gpio-ml-ioh.c b/drivers/gpio/gpio-ml-ioh.c
index 53d4abefa6ff..efa9acdc320a 100644
--- a/drivers/gpio/gpio-ml-ioh.c
+++ b/drivers/gpio/gpio-ml-ioh.c
@@ -155,11 +155,10 @@ static int ioh_gpio_direction_input(struct gpio_chip *gpio, unsigned nr)
 	return 0;
 }
 
-#ifdef CONFIG_PM
 /*
  * Save register configuration and disable interrupts.
  */
-static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
+static void __maybe_unused ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
 {
 	int i;
 
@@ -185,7 +184,7 @@ static void ioh_gpio_save_reg_conf(struct ioh_gpio *chip)
 /*
  * This function restores the register configuration of the GPIO device.
  */
-static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
+static void __maybe_unused ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
 {
 	int i;
 
@@ -207,7 +206,6 @@ static void ioh_gpio_restore_reg_conf(struct ioh_gpio *chip)
 				  &chip->reg->ioh_sel_reg[i]);
 	}
 }
-#endif
 
 static int ioh_gpio_to_irq(struct gpio_chip *gpio, unsigned offset)
 {
@@ -522,47 +520,23 @@ static void ioh_gpio_remove(struct pci_dev *pdev)
 	kfree(chip);
 }
 
-#ifdef CONFIG_PM
-static int ioh_gpio_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused ioh_gpio_suspend(struct device *dev)
 {
-	s32 ret;
-	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	struct ioh_gpio *chip = dev_get_drvdata(dev);
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->spinlock, flags);
 	ioh_gpio_save_reg_conf(chip);
 	spin_unlock_irqrestore(&chip->spinlock, flags);
 
-	ret = pci_save_state(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "pci_save_state Failed-%d\n", ret);
-		return ret;
-	}
-	pci_disable_device(pdev);
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_wake(pdev, PCI_D0, 1);
-	if (ret)
-		dev_err(&pdev->dev, "pci_enable_wake Failed -%d\n", ret);
-
 	return 0;
 }
 
-static int ioh_gpio_resume(struct pci_dev *pdev)
+static int __maybe_unused ioh_gpio_resume(struct device *dev)
 {
-	s32 ret;
-	struct ioh_gpio *chip = pci_get_drvdata(pdev);
+	struct ioh_gpio *chip = dev_get_drvdata(dev);
 	unsigned long flags;
 
-	ret = pci_enable_wake(pdev, PCI_D0, 0);
-
-	pci_set_power_state(pdev, PCI_D0);
-	ret = pci_enable_device(pdev);
-	if (ret) {
-		dev_err(&pdev->dev, "pci_enable_device Failed-%d ", ret);
-		return ret;
-	}
-	pci_restore_state(pdev);
-
 	spin_lock_irqsave(&chip->spinlock, flags);
 	iowrite32(0x01, &chip->reg->srst);
 	iowrite32(0x00, &chip->reg->srst);
@@ -571,10 +545,8 @@ static int ioh_gpio_resume(struct pci_dev *pdev)
 
 	return 0;
 }
-#else
-#define ioh_gpio_suspend NULL
-#define ioh_gpio_resume NULL
-#endif
+
+static SIMPLE_DEV_PM_OPS(ioh_gpio_pm_ops, ioh_gpio_suspend, ioh_gpio_resume);
 
 static const struct pci_device_id ioh_gpio_pcidev_id[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_ROHM, 0x802E) },
@@ -587,8 +559,9 @@ static struct pci_driver ioh_gpio_driver = {
 	.id_table = ioh_gpio_pcidev_id,
 	.probe = ioh_gpio_probe,
 	.remove = ioh_gpio_remove,
-	.suspend = ioh_gpio_suspend,
-	.resume = ioh_gpio_resume
+	.driver = {
+		.pm = &ioh_gpio_pm_ops,
+	},
 };
 
 module_pci_driver(ioh_gpio_driver);
diff --git a/drivers/gpio/gpio-mlxbf2.c b/drivers/gpio/gpio-mlxbf2.c
index befa5e109943..177d03ef4529 100644
--- a/drivers/gpio/gpio-mlxbf2.c
+++ b/drivers/gpio/gpio-mlxbf2.c
@@ -1,6 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0
 
-#include <linux/acpi.h>
 #include <linux/bitfield.h>
 #include <linux/bitops.h>
 #include <linux/device.h>
@@ -8,6 +7,7 @@
 #include <linux/io.h>
 #include <linux/ioport.h>
 #include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
@@ -47,12 +47,10 @@
 #define YU_GPIO_MODE0_SET		0x54
 #define YU_GPIO_MODE0_CLEAR		0x58
 
-#ifdef CONFIG_PM
 struct mlxbf2_gpio_context_save_regs {
 	u32 gpio_mode0;
 	u32 gpio_mode1;
 };
-#endif
 
 /* BlueField-2 gpio block context structure. */
 struct mlxbf2_gpio_context {
@@ -61,9 +59,7 @@ struct mlxbf2_gpio_context {
 	/* YU GPIO blocks address */
 	void __iomem *gpio_io;
 
-#ifdef CONFIG_PM
 	struct mlxbf2_gpio_context_save_regs *csave_regs;
-#endif
 };
 
 /* BlueField-2 gpio shared structure. */
@@ -73,11 +69,8 @@ struct mlxbf2_gpio_param {
 	struct mutex *lock;
 };
 
-static struct resource yu_arm_gpio_lock_res = {
-	.start = YU_ARM_GPIO_LOCK_ADDR,
-	.end   = YU_ARM_GPIO_LOCK_ADDR + YU_ARM_GPIO_LOCK_SIZE - 1,
-	.name  = "YU_ARM_GPIO_LOCK",
-};
+static struct resource yu_arm_gpio_lock_res =
+	DEFINE_RES_MEM_NAMED(YU_ARM_GPIO_LOCK_ADDR, YU_ARM_GPIO_LOCK_SIZE, "YU_ARM_GPIO_LOCK");
 
 static DEFINE_MUTEX(yu_arm_gpio_lock_mutex);
 
@@ -232,7 +225,6 @@ mlxbf2_gpio_probe(struct platform_device *pdev)
 	struct mlxbf2_gpio_context *gs;
 	struct device *dev = &pdev->dev;
 	struct gpio_chip *gc;
-	struct resource *res;
 	unsigned int npins;
 	int ret;
 
@@ -241,13 +233,9 @@ mlxbf2_gpio_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	/* YU GPIO block address */
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (!res)
-		return -ENODEV;
-
-	gs->gpio_io = devm_ioremap(dev, res->start, resource_size(res));
-	if (!gs->gpio_io)
-		return -ENOMEM;
+	gs->gpio_io = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(gs->gpio_io))
+		return PTR_ERR(gs->gpio_io);
 
 	ret = mlxbf2_gpio_get_lock_res(pdev);
 	if (ret) {
@@ -284,11 +272,9 @@ mlxbf2_gpio_probe(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-static int mlxbf2_gpio_suspend(struct platform_device *pdev,
-				pm_message_t state)
+static int __maybe_unused mlxbf2_gpio_suspend(struct device *dev)
 {
-	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
 
 	gs->csave_regs->gpio_mode0 = readl(gs->gpio_io +
 		YU_GPIO_MODE0);
@@ -298,9 +284,9 @@ static int mlxbf2_gpio_suspend(struct platform_device *pdev,
 	return 0;
 }
 
-static int mlxbf2_gpio_resume(struct platform_device *pdev)
+static int __maybe_unused mlxbf2_gpio_resume(struct device *dev)
 {
-	struct mlxbf2_gpio_context *gs = platform_get_drvdata(pdev);
+	struct mlxbf2_gpio_context *gs = dev_get_drvdata(dev);
 
 	writel(gs->csave_regs->gpio_mode0, gs->gpio_io +
 		YU_GPIO_MODE0);
@@ -309,7 +295,7 @@ static int mlxbf2_gpio_resume(struct platform_device *pdev)
 
 	return 0;
 }
-#endif
+static SIMPLE_DEV_PM_OPS(mlxbf2_pm_ops, mlxbf2_gpio_suspend, mlxbf2_gpio_resume);
 
 static const struct acpi_device_id __maybe_unused mlxbf2_gpio_acpi_match[] = {
 	{ "MLNXBF22", 0 },
@@ -320,13 +306,10 @@ MODULE_DEVICE_TABLE(acpi, mlxbf2_gpio_acpi_match);
 static struct platform_driver mlxbf2_gpio_driver = {
 	.driver = {
 		.name = "mlxbf2_gpio",
-		.acpi_match_table = ACPI_PTR(mlxbf2_gpio_acpi_match),
+		.acpi_match_table = mlxbf2_gpio_acpi_match,
+		.pm = &mlxbf2_pm_ops,
 	},
 	.probe    = mlxbf2_gpio_probe,
-#ifdef CONFIG_PM
-	.suspend  = mlxbf2_gpio_suspend,
-	.resume   = mlxbf2_gpio_resume,
-#endif
 };
 
 module_platform_driver(mlxbf2_gpio_driver);
diff --git a/drivers/gpio/gpio-mpc8xxx.c b/drivers/gpio/gpio-mpc8xxx.c
index 67dc38976ab6..70d6ae20b1da 100644
--- a/drivers/gpio/gpio-mpc8xxx.c
+++ b/drivers/gpio/gpio-mpc8xxx.c
@@ -332,7 +332,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 				 mpc8xxx_gc->regs + GPIO_DIR, NULL,
 				 BGPIOF_BIG_ENDIAN);
 		if (ret)
-			goto err;
+			return ret;
 		dev_dbg(&pdev->dev, "GPIO registers are LITTLE endian\n");
 	} else {
 		ret = bgpio_init(gc, &pdev->dev, 4,
@@ -342,7 +342,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 				 BGPIOF_BIG_ENDIAN
 				 | BGPIOF_BIG_ENDIAN_BYTE_ORDER);
 		if (ret)
-			goto err;
+			return ret;
 		dev_dbg(&pdev->dev, "GPIO registers are BIG endian\n");
 	}
 
@@ -380,11 +380,11 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 	    is_acpi_node(fwnode))
 		gc->write_reg(mpc8xxx_gc->regs + GPIO_IBE, 0xffffffff);
 
-	ret = gpiochip_add_data(gc, mpc8xxx_gc);
+	ret = devm_gpiochip_add_data(&pdev->dev, gc, mpc8xxx_gc);
 	if (ret) {
 		dev_err(&pdev->dev,
 			"GPIO chip registration failed with status %d\n", ret);
-		goto err;
+		return ret;
 	}
 
 	mpc8xxx_gc->irqn = platform_get_irq(pdev, 0);
@@ -416,7 +416,7 @@ static int mpc8xxx_probe(struct platform_device *pdev)
 
 	return 0;
 err:
-	iounmap(mpc8xxx_gc->regs);
+	irq_domain_remove(mpc8xxx_gc->irq);
 	return ret;
 }
 
@@ -429,9 +429,6 @@ static int mpc8xxx_remove(struct platform_device *pdev)
 		irq_domain_remove(mpc8xxx_gc->irq);
 	}
 
-	gpiochip_remove(&mpc8xxx_gc->gc);
-	iounmap(mpc8xxx_gc->regs);
-
 	return 0;
 }
 
diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
index 10c0a9bc5ea1..c3658a597a80 100644
--- a/drivers/gpio/gpio-mt7621.c
+++ b/drivers/gpio/gpio-mt7621.c
@@ -239,6 +239,7 @@ mediatek_gpio_bank_probe(struct device *dev,
 	if (!rg->chip.label)
 		return -ENOMEM;
 
+	rg->chip.offset = bank * MTK_BANK_WIDTH;
 	rg->irq_chip.name = dev_name(dev);
 	rg->irq_chip.parent_device = dev;
 	rg->irq_chip.irq_unmask = mediatek_gpio_irq_unmask;
diff --git a/drivers/gpio/gpio-rcar.c b/drivers/gpio/gpio-rcar.c
index b378aba32602..f7b653314e7e 100644
--- a/drivers/gpio/gpio-rcar.c
+++ b/drivers/gpio/gpio-rcar.c
@@ -564,9 +564,9 @@ static int gpio_rcar_probe(struct platform_device *pdev)
 	}
 
 	if (p->info.has_inen) {
-		pm_runtime_get_sync(p->dev);
+		pm_runtime_get_sync(dev);
 		gpio_rcar_enable_inputs(p);
-		pm_runtime_put(p->dev);
+		pm_runtime_put(dev);
 	}
 
 	dev_info(dev, "driving %d GPIOs\n", npins);
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 05c90d76cb22..c99858f40a27 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c
@@ -607,15 +607,21 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 	if (!gpio)
 		return -ENOMEM;
 
-	gpio->soc = of_device_get_match_data(&pdev->dev);
+	gpio->soc = device_get_match_data(&pdev->dev);
 
 	gpio->secure = devm_platform_ioremap_resource_byname(pdev, "security");
-	if (IS_ERR(gpio->secure))
-		return PTR_ERR(gpio->secure);
+	if (IS_ERR(gpio->secure)) {
+		gpio->secure = devm_platform_ioremap_resource(pdev, 0);
+		if (IS_ERR(gpio->secure))
+			return PTR_ERR(gpio->secure);
+	}
 
 	gpio->base = devm_platform_ioremap_resource_byname(pdev, "gpio");
-	if (IS_ERR(gpio->base))
-		return PTR_ERR(gpio->base);
+	if (IS_ERR(gpio->base)) {
+		gpio->base = devm_platform_ioremap_resource(pdev, 1);
+		if (IS_ERR(gpio->base))
+			return PTR_ERR(gpio->base);
+	}
 
 	err = platform_irq_count(pdev);
 	if (err < 0)
@@ -677,11 +683,13 @@ static int tegra186_gpio_probe(struct platform_device *pdev)
 
 	gpio->gpio.names = (const char * const *)names;
 
+#if defined(CONFIG_OF_GPIO)
 	gpio->gpio.of_node = pdev->dev.of_node;
 	gpio->gpio.of_gpio_n_cells = 2;
 	gpio->gpio.of_xlate = tegra186_gpio_of_xlate;
+#endif /* CONFIG_OF_GPIO */
 
-	gpio->intc.name = pdev->dev.of_node->name;
+	gpio->intc.name = dev_name(&pdev->dev);
 	gpio->intc.irq_ack = tegra186_irq_ack;
 	gpio->intc.irq_mask = tegra186_irq_mask;
 	gpio->intc.irq_unmask = tegra186_irq_unmask;
@@ -893,10 +901,20 @@ static const struct of_device_id tegra186_gpio_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, tegra186_gpio_of_match);
 
+static const struct acpi_device_id  tegra186_gpio_acpi_match[] = {
+	{ .id = "NVDA0108", .driver_data = (kernel_ulong_t)&tegra186_main_soc },
+	{ .id = "NVDA0208", .driver_data = (kernel_ulong_t)&tegra186_aon_soc },
+	{ .id = "NVDA0308", .driver_data = (kernel_ulong_t)&tegra194_main_soc },
+	{ .id = "NVDA0408", .driver_data = (kernel_ulong_t)&tegra194_aon_soc },
+	{}
+};
+MODULE_DEVICE_TABLE(acpi, tegra186_gpio_acpi_match);
+
 static struct platform_driver tegra186_gpio_driver = {
 	.driver = {
 		.name = "tegra186-gpio",
 		.of_match_table = tegra186_gpio_of_match,
+		.acpi_match_table = tegra186_gpio_acpi_match,
 	},
 	.probe = tegra186_gpio_probe,
 };
diff --git a/drivers/gpio/gpio-viperboard.c b/drivers/gpio/gpio-viperboard.c
index c301c1d56dd2..e55d28a8a66f 100644
--- a/drivers/gpio/gpio-viperboard.c
+++ b/drivers/gpio/gpio-viperboard.c
@@ -404,11 +404,10 @@ static int vprbrd_gpio_probe(struct platform_device *pdev)
 	vb_gpio->gpioa.get = vprbrd_gpioa_get;
 	vb_gpio->gpioa.direction_input = vprbrd_gpioa_direction_input;
 	vb_gpio->gpioa.direction_output = vprbrd_gpioa_direction_output;
+
 	ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpioa, vb_gpio);
-	if (ret < 0) {
-		dev_err(vb_gpio->gpioa.parent, "could not add gpio a");
+	if (ret < 0)
 		return ret;
-	}
 
 	/* registering gpio b */
 	vb_gpio->gpiob.label = "viperboard gpio b";
@@ -421,15 +420,8 @@ static int vprbrd_gpio_probe(struct platform_device *pdev)
 	vb_gpio->gpiob.get = vprbrd_gpiob_get;
 	vb_gpio->gpiob.direction_input = vprbrd_gpiob_direction_input;
 	vb_gpio->gpiob.direction_output = vprbrd_gpiob_direction_output;
-	ret = devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpiob, vb_gpio);
-	if (ret < 0) {
-		dev_err(vb_gpio->gpiob.parent, "could not add gpio b");
-		return ret;
-	}
-
-	platform_set_drvdata(pdev, vb_gpio);
 
-	return ret;
+	return devm_gpiochip_add_data(&pdev->dev, &vb_gpio->gpiob, vb_gpio);
 }
 
 static struct platform_driver vprbrd_gpio_driver = {
diff --git a/drivers/gpio/gpio-virtio.c b/drivers/gpio/gpio-virtio.c
new file mode 100644
index 000000000000..d24f1c9264bc
--- /dev/null
+++ b/drivers/gpio/gpio-virtio.c
@@ -0,0 +1,374 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * GPIO driver for virtio-based virtual GPIO controllers
+ *
+ * Copyright (C) 2021 metux IT consult
+ * Enrico Weigelt, metux IT consult <info@metux.net>
+ *
+ * Copyright (C) 2021 Linaro.
+ * Viresh Kumar <viresh.kumar@linaro.org>
+ */
+
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/gpio/driver.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/virtio_config.h>
+#include <uapi/linux/virtio_gpio.h>
+#include <uapi/linux/virtio_ids.h>
+
+struct virtio_gpio_line {
+	struct mutex lock; /* Protects line operation */
+	struct completion completion;
+	struct virtio_gpio_request req ____cacheline_aligned;
+	struct virtio_gpio_response res ____cacheline_aligned;
+	unsigned int rxlen;
+};
+
+struct virtio_gpio {
+	struct virtio_device *vdev;
+	struct mutex lock; /* Protects virtqueue operation */
+	struct gpio_chip gc;
+	struct virtio_gpio_line *lines;
+	struct virtqueue *request_vq;
+};
+
+static int _virtio_gpio_req(struct virtio_gpio *vgpio, u16 type, u16 gpio,
+			    u8 txvalue, u8 *rxvalue, void *response, u32 rxlen)
+{
+	struct virtio_gpio_line *line = &vgpio->lines[gpio];
+	struct virtio_gpio_request *req = &line->req;
+	struct virtio_gpio_response *res = response;
+	struct scatterlist *sgs[2], req_sg, res_sg;
+	struct device *dev = &vgpio->vdev->dev;
+	int ret;
+
+	/*
+	 * Prevent concurrent requests for the same line since we have
+	 * pre-allocated request/response buffers for each GPIO line. Moreover
+	 * Linux always accesses a GPIO line sequentially, so this locking shall
+	 * always go through without any delays.
+	 */
+	mutex_lock(&line->lock);
+
+	req->type = cpu_to_le16(type);
+	req->gpio = cpu_to_le16(gpio);
+	req->value = cpu_to_le32(txvalue);
+
+	sg_init_one(&req_sg, req, sizeof(*req));
+	sg_init_one(&res_sg, res, rxlen);
+	sgs[0] = &req_sg;
+	sgs[1] = &res_sg;
+
+	line->rxlen = 0;
+	reinit_completion(&line->completion);
+
+	/*
+	 * Virtqueue callers need to ensure they don't call its APIs with other
+	 * virtqueue operations at the same time.
+	 */
+	mutex_lock(&vgpio->lock);
+	ret = virtqueue_add_sgs(vgpio->request_vq, sgs, 1, 1, line, GFP_KERNEL);
+	if (ret) {
+		dev_err(dev, "failed to add request to vq\n");
+		mutex_unlock(&vgpio->lock);
+		goto out;
+	}
+
+	virtqueue_kick(vgpio->request_vq);
+	mutex_unlock(&vgpio->lock);
+
+	if (!wait_for_completion_timeout(&line->completion, HZ)) {
+		dev_err(dev, "GPIO operation timed out\n");
+		ret = -ETIMEDOUT;
+		goto out;
+	}
+
+	if (unlikely(res->status != VIRTIO_GPIO_STATUS_OK)) {
+		dev_err(dev, "GPIO request failed: %d\n", gpio);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (unlikely(line->rxlen != rxlen)) {
+		dev_err(dev, "GPIO operation returned incorrect len (%u : %u)\n",
+			rxlen, line->rxlen);
+		ret = -EINVAL;
+		goto out;
+	}
+
+	if (rxvalue)
+		*rxvalue = res->value;
+
+out:
+	mutex_unlock(&line->lock);
+	return ret;
+}
+
+static int virtio_gpio_req(struct virtio_gpio *vgpio, u16 type, u16 gpio,
+			   u8 txvalue, u8 *rxvalue)
+{
+	struct virtio_gpio_line *line = &vgpio->lines[gpio];
+	struct virtio_gpio_response *res = &line->res;
+
+	return _virtio_gpio_req(vgpio, type, gpio, txvalue, rxvalue, res,
+				sizeof(*res));
+}
+
+static void virtio_gpio_free(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			VIRTIO_GPIO_DIRECTION_NONE, NULL);
+}
+
+static int virtio_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	u8 direction;
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_DIRECTION, gpio, 0,
+			      &direction);
+	if (ret)
+		return ret;
+
+	switch (direction) {
+	case VIRTIO_GPIO_DIRECTION_IN:
+		return GPIO_LINE_DIRECTION_IN;
+	case VIRTIO_GPIO_DIRECTION_OUT:
+		return GPIO_LINE_DIRECTION_OUT;
+	default:
+		return -EINVAL;
+	}
+}
+
+static int virtio_gpio_direction_input(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	return virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			       VIRTIO_GPIO_DIRECTION_IN, NULL);
+}
+
+static int virtio_gpio_direction_output(struct gpio_chip *gc, unsigned int gpio,
+					int value)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_VALUE, gpio, value, NULL);
+	if (ret)
+		return ret;
+
+	return virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_DIRECTION, gpio,
+			       VIRTIO_GPIO_DIRECTION_OUT, NULL);
+}
+
+static int virtio_gpio_get(struct gpio_chip *gc, unsigned int gpio)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+	u8 value;
+	int ret;
+
+	ret = virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_VALUE, gpio, 0, &value);
+	return ret ? ret : value;
+}
+
+static void virtio_gpio_set(struct gpio_chip *gc, unsigned int gpio, int value)
+{
+	struct virtio_gpio *vgpio = gpiochip_get_data(gc);
+
+	virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_SET_VALUE, gpio, value, NULL);
+}
+
+static void virtio_gpio_request_vq(struct virtqueue *vq)
+{
+	struct virtio_gpio_line *line;
+	unsigned int len;
+
+	do {
+		line = virtqueue_get_buf(vq, &len);
+		if (!line)
+			return;
+
+		line->rxlen = len;
+		complete(&line->completion);
+	} while (1);
+}
+
+static void virtio_gpio_free_vqs(struct virtio_device *vdev)
+{
+	vdev->config->reset(vdev);
+	vdev->config->del_vqs(vdev);
+}
+
+static int virtio_gpio_alloc_vqs(struct virtio_gpio *vgpio,
+				 struct virtio_device *vdev)
+{
+	const char * const names[] = { "requestq" };
+	vq_callback_t *cbs[] = {
+		virtio_gpio_request_vq,
+	};
+	struct virtqueue *vqs[1] = { NULL };
+	int ret;
+
+	ret = virtio_find_vqs(vdev, 1, vqs, cbs, names, NULL);
+	if (ret) {
+		dev_err(&vdev->dev, "failed to find vqs: %d\n", ret);
+		return ret;
+	}
+
+	if (!vqs[0]) {
+		dev_err(&vdev->dev, "failed to find requestq vq\n");
+		return -ENODEV;
+	}
+	vgpio->request_vq = vqs[0];
+
+	return 0;
+}
+
+static const char **virtio_gpio_get_names(struct virtio_gpio *vgpio,
+					  u32 gpio_names_size, u16 ngpio)
+{
+	struct virtio_gpio_response_get_names *res;
+	struct device *dev = &vgpio->vdev->dev;
+	u8 *gpio_names, *str;
+	const char **names;
+	int i, ret, len;
+
+	if (!gpio_names_size)
+		return NULL;
+
+	len = sizeof(*res) + gpio_names_size;
+	res = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!res)
+		return NULL;
+	gpio_names = res->value;
+
+	ret = _virtio_gpio_req(vgpio, VIRTIO_GPIO_MSG_GET_NAMES, 0, 0, NULL,
+			       res, len);
+	if (ret) {
+		dev_err(dev, "Failed to get GPIO names: %d\n", ret);
+		return NULL;
+	}
+
+	names = devm_kcalloc(dev, ngpio, sizeof(*names), GFP_KERNEL);
+	if (!names)
+		return NULL;
+
+	/* NULL terminate the string instead of checking it */
+	gpio_names[gpio_names_size - 1] = '\0';
+
+	for (i = 0, str = gpio_names; i < ngpio; i++) {
+		names[i] = str;
+		str += strlen(str) + 1; /* zero-length strings are allowed */
+
+		if (str > gpio_names + gpio_names_size) {
+			dev_err(dev, "gpio_names block is too short (%d)\n", i);
+			return NULL;
+		}
+	}
+
+	return names;
+}
+
+static int virtio_gpio_probe(struct virtio_device *vdev)
+{
+	struct virtio_gpio_config config;
+	struct device *dev = &vdev->dev;
+	struct virtio_gpio *vgpio;
+	u32 gpio_names_size;
+	u16 ngpio;
+	int ret, i;
+
+	vgpio = devm_kzalloc(dev, sizeof(*vgpio), GFP_KERNEL);
+	if (!vgpio)
+		return -ENOMEM;
+
+	/* Read configuration */
+	virtio_cread_bytes(vdev, 0, &config, sizeof(config));
+	gpio_names_size = le32_to_cpu(config.gpio_names_size);
+	ngpio = le16_to_cpu(config.ngpio);
+	if (!ngpio) {
+		dev_err(dev, "Number of GPIOs can't be zero\n");
+		return -EINVAL;
+	}
+
+	vgpio->lines = devm_kcalloc(dev, ngpio, sizeof(*vgpio->lines), GFP_KERNEL);
+	if (!vgpio->lines)
+		return -ENOMEM;
+
+	for (i = 0; i < ngpio; i++) {
+		mutex_init(&vgpio->lines[i].lock);
+		init_completion(&vgpio->lines[i].completion);
+	}
+
+	mutex_init(&vgpio->lock);
+	vdev->priv = vgpio;
+
+	vgpio->vdev			= vdev;
+	vgpio->gc.free			= virtio_gpio_free;
+	vgpio->gc.get_direction		= virtio_gpio_get_direction;
+	vgpio->gc.direction_input	= virtio_gpio_direction_input;
+	vgpio->gc.direction_output	= virtio_gpio_direction_output;
+	vgpio->gc.get			= virtio_gpio_get;
+	vgpio->gc.set			= virtio_gpio_set;
+	vgpio->gc.ngpio			= ngpio;
+	vgpio->gc.base			= -1; /* Allocate base dynamically */
+	vgpio->gc.label			= dev_name(dev);
+	vgpio->gc.parent		= dev;
+	vgpio->gc.owner			= THIS_MODULE;
+	vgpio->gc.can_sleep		= true;
+
+	ret = virtio_gpio_alloc_vqs(vgpio, vdev);
+	if (ret)
+		return ret;
+
+	/* Mark the device ready to perform operations from within probe() */
+	virtio_device_ready(vdev);
+
+	vgpio->gc.names = virtio_gpio_get_names(vgpio, gpio_names_size, ngpio);
+
+	ret = gpiochip_add_data(&vgpio->gc, vgpio);
+	if (ret) {
+		virtio_gpio_free_vqs(vdev);
+		dev_err(dev, "Failed to add virtio-gpio controller\n");
+	}
+
+	return ret;
+}
+
+static void virtio_gpio_remove(struct virtio_device *vdev)
+{
+	struct virtio_gpio *vgpio = vdev->priv;
+
+	gpiochip_remove(&vgpio->gc);
+	virtio_gpio_free_vqs(vdev);
+}
+
+static const struct virtio_device_id id_table[] = {
+	{ VIRTIO_ID_GPIO, VIRTIO_DEV_ANY_ID },
+	{},
+};
+MODULE_DEVICE_TABLE(virtio, id_table);
+
+static struct virtio_driver virtio_gpio_driver = {
+	.id_table		= id_table,
+	.probe			= virtio_gpio_probe,
+	.remove			= virtio_gpio_remove,
+	.driver			= {
+		.name		= KBUILD_MODNAME,
+		.owner		= THIS_MODULE,
+	},
+};
+module_virtio_driver(virtio_gpio_driver);
+
+MODULE_AUTHOR("Enrico Weigelt, metux IT consult <info@metux.net>");
+MODULE_AUTHOR("Viresh Kumar <viresh.kumar@linaro.org>");
+MODULE_DESCRIPTION("VirtIO GPIO driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpio/gpiolib-devres.c b/drivers/gpio/gpiolib-devres.c
index 4a517e5dedf0..79da85d17b71 100644
--- a/drivers/gpio/gpiolib-devres.c
+++ b/drivers/gpio/gpiolib-devres.c
@@ -145,7 +145,7 @@ EXPORT_SYMBOL_GPL(devm_gpiod_get_index);
  * In case of error an ERR_PTR() is returned.
  */
 struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
-					      struct device_node *node,
+					      const struct device_node *node,
 					      const char *propname, int index,
 					      enum gpiod_flags dflags,
 					      const char *label)
diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index bbcc7c073f63..0ad288ab6262 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -122,7 +122,7 @@ static struct gpio_desc *of_xlate_and_get_gpiod_flags(struct gpio_chip *chip,
 bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
 {
 	int size;
-	struct device_node *np = gc->of_node;
+	const struct device_node *np = gc->of_node;
 
 	size = of_property_count_u32_elems(np,  "gpio-reserved-ranges");
 	if (size > 0 && size % 2 == 0)
@@ -130,7 +130,7 @@ bool of_gpio_need_valid_mask(const struct gpio_chip *gc)
 	return false;
 }
 
-static void of_gpio_flags_quirks(struct device_node *np,
+static void of_gpio_flags_quirks(const struct device_node *np,
 				 const char *propname,
 				 enum of_gpio_flags *flags,
 				 int index)
@@ -236,7 +236,7 @@ static void of_gpio_flags_quirks(struct device_node *np,
  * value on the error condition. If @flags is not NULL the function also fills
  * in flags for the GPIO.
  */
-static struct gpio_desc *of_get_named_gpiod_flags(struct device_node *np,
+static struct gpio_desc *of_get_named_gpiod_flags(const struct device_node *np,
 		     const char *propname, int index, enum of_gpio_flags *flags)
 {
 	struct of_phandle_args gpiospec;
@@ -275,7 +275,7 @@ out:
 	return desc;
 }
 
-int of_get_named_gpio_flags(struct device_node *np, const char *list_name,
+int of_get_named_gpio_flags(const struct device_node *np, const char *list_name,
 			    int index, enum of_gpio_flags *flags)
 {
 	struct gpio_desc *desc;
@@ -303,7 +303,7 @@ EXPORT_SYMBOL_GPL(of_get_named_gpio_flags);
  *
  * In case of error an ERR_PTR() is returned.
  */
-struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
 					 const char *propname, int index,
 					 enum gpiod_flags dflags,
 					 const char *label)
@@ -373,7 +373,7 @@ static struct gpio_desc *of_find_spi_gpio(struct device *dev, const char *con_id
 					  enum of_gpio_flags *of_flags)
 {
 	char prop_name[32]; /* 32 is max size of property name */
-	struct device_node *np = dev->of_node;
+	const struct device_node *np = dev->of_node;
 	struct gpio_desc *desc;
 
 	/*
@@ -404,7 +404,7 @@ static struct gpio_desc *of_find_spi_cs_gpio(struct device *dev,
 					     unsigned int idx,
 					     unsigned long *flags)
 {
-	struct device_node *np = dev->of_node;
+	const struct device_node *np = dev->of_node;
 
 	if (!IS_ENABLED(CONFIG_SPI_MASTER))
 		return ERR_PTR(-ENOENT);
@@ -440,7 +440,7 @@ static struct gpio_desc *of_find_regulator_gpio(struct device *dev, const char *
 		"wlf,ldo1ena", /* WM8994 */
 		"wlf,ldo2ena", /* WM8994 */
 	};
-	struct device_node *np = dev->of_node;
+	const struct device_node *np = dev->of_node;
 	struct gpio_desc *desc;
 	int i;
 
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 27c07108496d..d1b9b721218f 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -382,10 +382,18 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip)
 	if (count < 0)
 		return 0;
 
-	if (count > gdev->ngpio) {
-		dev_warn(&gdev->dev, "gpio-line-names is length %d but should be at most length %d",
-			 count, gdev->ngpio);
-		count = gdev->ngpio;
+	/*
+	 * When offset is set in the driver side we assume the driver internally
+	 * is using more than one gpiochip per the same device. We have to stop
+	 * setting friendly names if the specified ones with 'gpio-line-names'
+	 * are less than the offset in the device itself. This means all the
+	 * lines are not present for every single pin within all the internal
+	 * gpiochips.
+	 */
+	if (count <= chip->offset) {
+		dev_warn(&gdev->dev, "gpio-line-names too short (length %d), cannot map names for the gpiochip at offset %u\n",
+			 count, chip->offset);
+		return 0;
 	}
 
 	names = kcalloc(count, sizeof(*names), GFP_KERNEL);
@@ -400,8 +408,22 @@ static int devprop_gpiochip_set_names(struct gpio_chip *chip)
 		return ret;
 	}
 
+	/*
+	 * When more that one gpiochip per device is used, 'count' can
+	 * contain at most number gpiochips x chip->ngpio. We have to
+	 * correctly distribute all defined lines taking into account
+	 * chip->offset as starting point from where we will assign
+	 * the names to pins from the 'names' array. Since property
+	 * 'gpio-line-names' cannot contains gaps, we have to be sure
+	 * we only assign those pins that really exists since chip->ngpio
+	 * can be different of the chip->offset.
+	 */
+	count = (count > chip->offset) ? count - chip->offset : count;
+	if (count > chip->ngpio)
+		count = chip->ngpio;
+
 	for (i = 0; i < count; i++)
-		gdev->descs[i].name = names[i];
+		gdev->descs[i].name = names[chip->offset + i];
 
 	kfree(names);
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c
index 8f53837d4d3e..97178b307ed6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_atomfirmware.c
@@ -468,14 +468,18 @@ bool amdgpu_atomfirmware_dynamic_boot_config_supported(struct amdgpu_device *ade
 	return (fw_cap & ATOM_FIRMWARE_CAP_DYNAMIC_BOOT_CFG_ENABLE) ? true : false;
 }
 
-/*
- * Helper function to query RAS EEPROM address
- *
- * @adev: amdgpu_device pointer
+/**
+ * amdgpu_atomfirmware_ras_rom_addr -- Get the RAS EEPROM addr from VBIOS
+ * adev: amdgpu_device pointer
+ * i2c_address: pointer to u8; if not NULL, will contain
+ *    the RAS EEPROM address if the function returns true
  *
- * Return true if vbios supports ras rom address reporting
+ * Return true if VBIOS supports RAS EEPROM address reporting,
+ * else return false. If true and @i2c_address is not NULL,
+ * will contain the RAS ROM address.
  */
-bool amdgpu_atomfirmware_ras_rom_addr(struct amdgpu_device *adev, uint8_t* i2c_address)
+bool amdgpu_atomfirmware_ras_rom_addr(struct amdgpu_device *adev,
+				      u8 *i2c_address)
 {
 	struct amdgpu_mode_info *mode_info = &adev->mode_info;
 	int index;
@@ -483,27 +487,39 @@ bool amdgpu_atomfirmware_ras_rom_addr(struct amdgpu_device *adev, uint8_t* i2c_a
 	union firmware_info *firmware_info;
 	u8 frev, crev;
 
-	if (i2c_address == NULL)
-		return false;
-
-	*i2c_address = 0;
-
 	index = get_index_into_master_table(atom_master_list_of_data_tables_v2_1,
-			firmwareinfo);
+					    firmwareinfo);
 
 	if (amdgpu_atom_parse_data_header(adev->mode_info.atom_context,
-				index, &size, &frev, &crev, &data_offset)) {
+					  index, &size, &frev, &crev,
+					  &data_offset)) {
 		/* support firmware_info 3.4 + */
 		if ((frev == 3 && crev >=4) || (frev > 3)) {
 			firmware_info = (union firmware_info *)
 				(mode_info->atom_context->bios + data_offset);
-			*i2c_address = firmware_info->v34.ras_rom_i2c_slave_addr;
+			/* The ras_rom_i2c_slave_addr should ideally
+			 * be a 19-bit EEPROM address, which would be
+			 * used as is by the driver; see top of
+			 * amdgpu_eeprom.c.
+			 *
+			 * When this is the case, 0 is of course a
+			 * valid RAS EEPROM address, in which case,
+			 * we'll drop the first "if (firm...)" and only
+			 * leave the check for the pointer.
+			 *
+			 * The reason this works right now is because
+			 * ras_rom_i2c_slave_addr contains the EEPROM
+			 * device type qualifier 1010b in the top 4
+			 * bits.
+			 */
+			if (firmware_info->v34.ras_rom_i2c_slave_addr) {
+				if (i2c_address)
+					*i2c_address = firmware_info->v34.ras_rom_i2c_slave_addr;
+				return true;
+			}
 		}
 	}
 
-	if (*i2c_address != 0)
-		return true;
-
 	return false;
 }
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
index 8e5a7ac8c36f..7a7316731911 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_display.c
@@ -522,6 +522,7 @@ uint32_t amdgpu_display_supported_domains(struct amdgpu_device *adev,
 			break;
 		case CHIP_RENOIR:
 		case CHIP_VANGOGH:
+		case CHIP_YELLOW_CARP:
 			domain |= AMDGPU_GEM_DOMAIN_GTT;
 			break;
 
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
index b6640291f980..f18240f87387 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c
@@ -1181,7 +1181,12 @@ static const struct pci_device_id pciidlist[] = {
 	{0x1002, 0x73A1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73A2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73A3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73A5, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73A8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73A9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73AB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73AC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
+	{0x1002, 0x73AD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73AE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73AF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
 	{0x1002, 0x73BF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_SIENNA_CICHLID},
@@ -1197,6 +1202,11 @@ static const struct pci_device_id pciidlist[] = {
 	{0x1002, 0x73C0, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
 	{0x1002, 0x73C1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
 	{0x1002, 0x73C3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
+	{0x1002, 0x73DA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
+	{0x1002, 0x73DB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
+	{0x1002, 0x73DC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
+	{0x1002, 0x73DD, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
+	{0x1002, 0x73DE, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
 	{0x1002, 0x73DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVY_FLOUNDER},
 
 	/* DIMGREY_CAVEFISH */
@@ -1204,6 +1214,13 @@ static const struct pci_device_id pciidlist[] = {
 	{0x1002, 0x73E1, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
 	{0x1002, 0x73E2, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
 	{0x1002, 0x73E3, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73E8, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73E9, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73EA, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73EB, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73EC, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73ED, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
+	{0x1002, 0x73EF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
 	{0x1002, 0x73FF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_DIMGREY_CAVEFISH},
 
 	/* Aldebaran */
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fdinfo.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fdinfo.c
index d94c5419ec25..5a6857c44bb6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fdinfo.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fdinfo.c
@@ -59,6 +59,7 @@ void amdgpu_show_fdinfo(struct seq_file *m, struct file *f)
 	uint64_t vram_mem = 0, gtt_mem = 0, cpu_mem = 0;
 	struct drm_file *file = f->private_data;
 	struct amdgpu_device *adev = drm_to_adev(file->minor->dev);
+	struct amdgpu_bo *root;
 	int ret;
 
 	ret = amdgpu_file_to_fpriv(f, &fpriv);
@@ -69,13 +70,19 @@ void amdgpu_show_fdinfo(struct seq_file *m, struct file *f)
 	dev = PCI_SLOT(adev->pdev->devfn);
 	fn = PCI_FUNC(adev->pdev->devfn);
 
-	ret = amdgpu_bo_reserve(fpriv->vm.root.bo, false);
+	root = amdgpu_bo_ref(fpriv->vm.root.bo);
+	if (!root)
+		return;
+
+	ret = amdgpu_bo_reserve(root, false);
 	if (ret) {
 		DRM_ERROR("Fail to reserve bo\n");
 		return;
 	}
 	amdgpu_vm_get_memory(&fpriv->vm, &vram_mem, &gtt_mem, &cpu_mem);
-	amdgpu_bo_unreserve(fpriv->vm.root.bo);
+	amdgpu_bo_unreserve(root);
+	amdgpu_bo_unref(&root);
+
 	seq_printf(m, "pdev:\t%04x:%02x:%02x.%d\npasid:\t%u\n", domain, bus,
 			dev, fn, fpriv->vm.pasid);
 	seq_printf(m, "vram mem:\t%llu kB\n", vram_mem/1024UL);
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
index 14499f0de32d..8d682befe0d6 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_fence.c
@@ -552,6 +552,9 @@ void amdgpu_fence_driver_hw_fini(struct amdgpu_device *adev)
 		if (!ring || !ring->fence_drv.initialized)
 			continue;
 
+		if (!ring->no_scheduler)
+			drm_sched_stop(&ring->sched, NULL);
+
 		/* You can't wait for HW to signal if it's gone */
 		if (!drm_dev_is_unplugged(&adev->ddev))
 			r = amdgpu_fence_wait_empty(ring);
@@ -611,6 +614,11 @@ void amdgpu_fence_driver_hw_init(struct amdgpu_device *adev)
 		if (!ring || !ring->fence_drv.initialized)
 			continue;
 
+		if (!ring->no_scheduler) {
+			drm_sched_resubmit_jobs(&ring->sched);
+			drm_sched_start(&ring->sched, true);
+		}
+
 		/* enable the interrupt */
 		if (ring->fence_drv.irq_src)
 			amdgpu_irq_get(adev, ring->fence_drv.irq_src,
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
index cb07cc3b06ed..d6aa032890ee 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gem.c
@@ -341,21 +341,18 @@ retry:
 	r = amdgpu_gem_object_create(adev, size, args->in.alignment,
 				     initial_domain,
 				     flags, ttm_bo_type_device, resv, &gobj);
-	if (r) {
-		if (r != -ERESTARTSYS) {
-			if (flags & AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED) {
-				flags &= ~AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED;
-				goto retry;
-			}
+	if (r && r != -ERESTARTSYS) {
+		if (flags & AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED) {
+			flags &= ~AMDGPU_GEM_CREATE_CPU_ACCESS_REQUIRED;
+			goto retry;
+		}
 
-			if (initial_domain == AMDGPU_GEM_DOMAIN_VRAM) {
-				initial_domain |= AMDGPU_GEM_DOMAIN_GTT;
-				goto retry;
-			}
-			DRM_DEBUG("Failed to allocate GEM object (%llu, %d, %llu, %d)\n",
-				  size, initial_domain, args->in.alignment, r);
+		if (initial_domain == AMDGPU_GEM_DOMAIN_VRAM) {
+			initial_domain |= AMDGPU_GEM_DOMAIN_GTT;
+			goto retry;
 		}
-		return r;
+		DRM_DEBUG("Failed to allocate GEM object (%llu, %d, %llu, %d)\n",
+				size, initial_domain, args->in.alignment, r);
 	}
 
 	if (flags & AMDGPU_GEM_CREATE_VM_ALWAYS_VALID) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c
index 543000304a1c..675a72ef305d 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_gtt_mgr.c
@@ -118,7 +118,7 @@ bool amdgpu_gtt_mgr_has_gart_addr(struct ttm_resource *res)
  * @man: TTM memory type manager
  * @tbo: TTM BO we need this range for
  * @place: placement flags and restrictions
- * @mem: the resulting mem object
+ * @res: the resulting mem object
  *
  * Dummy, allocate the node but no space for it yet.
  */
@@ -182,7 +182,7 @@ err_out:
  * amdgpu_gtt_mgr_del - free ranges
  *
  * @man: TTM memory type manager
- * @mem: TTM memory object
+ * @res: TTM memory object
  *
  * Free the allocated GTT again.
  */
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
index 23efdc672502..9b41cb8c3de5 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_psp.c
@@ -469,10 +469,10 @@ psp_cmd_submit_buf(struct psp_context *psp,
 	 */
 	if (!skip_unsupport && (psp->cmd_buf_mem->resp.status || !timeout) && !ras_intr) {
 		if (ucode)
-			DRM_WARN("failed to load ucode (%s) ",
-				  amdgpu_ucode_name(ucode->ucode_id));
-		DRM_WARN("psp gfx command (%s) failed and response status is (0x%X)\n",
-			 psp_gfx_cmd_name(psp->cmd_buf_mem->cmd_id),
+			DRM_WARN("failed to load ucode %s(0x%X) ",
+				  amdgpu_ucode_name(ucode->ucode_id), ucode->ucode_id);
+		DRM_WARN("psp gfx command %s(0x%X) failed and response status is (0x%X)\n",
+			 psp_gfx_cmd_name(psp->cmd_buf_mem->cmd_id), psp->cmd_buf_mem->cmd_id,
 			 psp->cmd_buf_mem->resp.status);
 		if (!timeout) {
 			ret = -EINVAL;
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
index 9dc3b2d88176..dc44c946a244 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_ras_eeprom.c
@@ -114,27 +114,24 @@ static bool __get_eeprom_i2c_addr_arct(struct amdgpu_device *adev,
 static bool __get_eeprom_i2c_addr(struct amdgpu_device *adev,
 				  struct amdgpu_ras_eeprom_control *control)
 {
-	uint8_t ras_rom_i2c_slave_addr;
+	u8 i2c_addr;
 
 	if (!control)
 		return false;
 
-	control->i2c_address = 0;
-
-	if (amdgpu_atomfirmware_ras_rom_addr(adev, &ras_rom_i2c_slave_addr))
-	{
-		switch (ras_rom_i2c_slave_addr) {
-		case 0xA0:
-			control->i2c_address = 0;
-			return true;
-		case 0xA8:
-			control->i2c_address = 0x40000;
-			return true;
-		default:
-			dev_warn(adev->dev, "RAS EEPROM I2C slave address %02x not supported",
-				 ras_rom_i2c_slave_addr);
-			return false;
-		}
+	if (amdgpu_atomfirmware_ras_rom_addr(adev, &i2c_addr)) {
+		/* The address given by VBIOS is an 8-bit, wire-format
+		 * address, i.e. the most significant byte.
+		 *
+		 * Normalize it to a 19-bit EEPROM address. Remove the
+		 * device type identifier and make it a 7-bit address;
+		 * then make it a 19-bit EEPROM address. See top of
+		 * amdgpu_eeprom.c.
+		 */
+		i2c_addr = (i2c_addr & 0x0F) >> 1;
+		control->i2c_address = ((u32) i2c_addr) << 16;
+
+		return true;
 	}
 
 	switch (adev->asic_type) {
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
index 2fd77c36a1ff..7b2b0980ec41 100644
--- a/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
+++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_vram_mgr.c
@@ -361,7 +361,7 @@ static void amdgpu_vram_mgr_virt_start(struct ttm_resource *mem,
  * @man: TTM memory type manager
  * @tbo: TTM BO we need this range for
  * @place: placement flags and restrictions
- * @mem: the resulting mem object
+ * @res: the resulting mem object
  *
  * Allocate VRAM for the given BO.
  */
@@ -487,7 +487,7 @@ error_sub:
  * amdgpu_vram_mgr_del - free ranges
  *
  * @man: TTM memory type manager
- * @mem: TTM memory object
+ * @res: TTM memory object
  *
  * Free the allocated VRAM again.
  */
@@ -522,7 +522,7 @@ static void amdgpu_vram_mgr_del(struct ttm_resource_manager *man,
  * amdgpu_vram_mgr_alloc_sgt - allocate and fill a sg table
  *
  * @adev: amdgpu device pointer
- * @mem: TTM memory object
+ * @res: TTM memory object
  * @offset: byte offset from the base of VRAM BO
  * @length: number of bytes to export in sg_table
  * @dev: the other device
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
index ff2307d7ee0f..23b066bcffb2 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.c
@@ -258,6 +258,8 @@ static void xgpu_ai_mailbox_flr_work(struct work_struct *work)
 	amdgpu_virt_fini_data_exchange(adev);
 	atomic_set(&adev->in_gpu_reset, 1);
 
+	xgpu_ai_mailbox_trans_msg(adev, IDH_READY_TO_RESET, 0, 0, 0);
+
 	do {
 		if (xgpu_ai_mailbox_peek_msg(adev) == IDH_FLR_NOTIFICATION_CMPL)
 			goto flr_done;
diff --git a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
index 50572635d0f8..bd3b23171579 100644
--- a/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
+++ b/drivers/gpu/drm/amd/amdgpu/mxgpu_ai.h
@@ -37,6 +37,7 @@ enum idh_request {
 	IDH_REQ_GPU_RESET_ACCESS,
 
 	IDH_LOG_VF_ERROR       = 200,
+	IDH_READY_TO_RESET 	= 201,
 };
 
 enum idh_event {
diff --git a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
index ba1d3ab869c1..f50045cebd44 100644
--- a/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
+++ b/drivers/gpu/drm/amd/amdgpu/nbio_v7_4.c
@@ -85,11 +85,14 @@
 #define mmRCC_DEV0_EPF0_STRAP0_ALDE			0x0015
 #define mmRCC_DEV0_EPF0_STRAP0_ALDE_BASE_IDX		2
 
-#define mmBIF_DOORBELL_INT_CNTL_ALDE 			0x3878
+#define mmBIF_DOORBELL_INT_CNTL_ALDE 			0x00fe
 #define mmBIF_DOORBELL_INT_CNTL_ALDE_BASE_IDX 		2
 #define BIF_DOORBELL_INT_CNTL_ALDE__DOORBELL_INTERRUPT_DISABLE__SHIFT	0x18
 #define BIF_DOORBELL_INT_CNTL_ALDE__DOORBELL_INTERRUPT_DISABLE_MASK	0x01000000L
 
+#define mmBIF_INTR_CNTL_ALDE 				0x0101
+#define mmBIF_INTR_CNTL_ALDE_BASE_IDX 			2
+
 static void nbio_v7_4_query_ras_error_count(struct amdgpu_device *adev,
 					void *ras_error_status);
 
@@ -440,14 +443,23 @@ static int nbio_v7_4_set_ras_controller_irq_state(struct amdgpu_device *adev,
 	 */
 	uint32_t bif_intr_cntl;
 
-	bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL);
+	if (adev->asic_type == CHIP_ALDEBARAN)
+		bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL_ALDE);
+	else
+		bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL);
+
 	if (state == AMDGPU_IRQ_STATE_ENABLE) {
 		/* set interrupt vector select bit to 0 to select
 		 * vetcor 1 for bare metal case */
 		bif_intr_cntl = REG_SET_FIELD(bif_intr_cntl,
 					      BIF_INTR_CNTL,
 					      RAS_INTR_VEC_SEL, 0);
-		WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL, bif_intr_cntl);
+
+		if (adev->asic_type == CHIP_ALDEBARAN)
+			WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL_ALDE, bif_intr_cntl);
+		else
+			WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL, bif_intr_cntl);
+
 	}
 
 	return 0;
@@ -476,14 +488,22 @@ static int nbio_v7_4_set_ras_err_event_athub_irq_state(struct amdgpu_device *ade
 	 */
 	uint32_t bif_intr_cntl;
 
-	bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL);
+	if (adev->asic_type == CHIP_ALDEBARAN)
+		bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL_ALDE);
+	else
+		bif_intr_cntl = RREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL);
+
 	if (state == AMDGPU_IRQ_STATE_ENABLE) {
 		/* set interrupt vector select bit to 0 to select
 		 * vetcor 1 for bare metal case */
 		bif_intr_cntl = REG_SET_FIELD(bif_intr_cntl,
 					      BIF_INTR_CNTL,
 					      RAS_INTR_VEC_SEL, 0);
-		WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL, bif_intr_cntl);
+
+		if (adev->asic_type == CHIP_ALDEBARAN)
+			WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL_ALDE, bif_intr_cntl);
+		else
+			WREG32_SOC15(NBIO, 0, mmBIF_INTR_CNTL, bif_intr_cntl);
 	}
 
 	return 0;
diff --git a/drivers/gpu/drm/amd/amdgpu/vi.c b/drivers/gpu/drm/amd/amdgpu/vi.c
index 42a35d9520f9..fe9a7cc8d9eb 100644
--- a/drivers/gpu/drm/amd/amdgpu/vi.c
+++ b/drivers/gpu/drm/amd/amdgpu/vi.c
@@ -904,14 +904,7 @@ static bool vi_asic_supports_baco(struct amdgpu_device *adev)
 	case CHIP_POLARIS11:
 	case CHIP_POLARIS12:
 	case CHIP_TOPAZ:
-		/* Disable BACO support for the specific polaris12 SKU temporarily */
-		if ((adev->pdev->device == 0x699F) &&
-		     (adev->pdev->revision == 0xC7) &&
-		     (adev->pdev->subsystem_vendor == 0x1028) &&
-		     (adev->pdev->subsystem_device == 0x0039))
-			return false;
-		else
-			return amdgpu_dpm_is_baco_supported(adev);
+		return amdgpu_dpm_is_baco_supported(adev);
 	default:
 		return false;
 	}
diff --git a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
index 491373fcdb38..9fc8021bb0ab 100644
--- a/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
+++ b/drivers/gpu/drm/amd/amdkfd/kfd_svm.c
@@ -2484,7 +2484,8 @@ svm_range_restore_pages(struct amdgpu_device *adev, unsigned int pasid,
 	}
 	if (!p->xnack_enabled) {
 		pr_debug("XNACK not enabled for pasid 0x%x\n", pasid);
-		return -EFAULT;
+		r = -EFAULT;
+		goto out;
 	}
 	svms = &p->svms;
 
diff --git a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
index 816723691d51..9b1fc54555ee 100644
--- a/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
+++ b/drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c
@@ -1200,7 +1200,7 @@ static int amdgpu_dm_init(struct amdgpu_device *adev)
 	dc_hardware_init(adev->dm.dc);
 
 #if defined(CONFIG_DRM_AMD_DC_DCN)
-	if (adev->apu_flags) {
+	if ((adev->flags & AMD_IS_APU) && (adev->asic_type >= CHIP_CARRIZO)) {
 		struct dc_phy_addr_space_config pa_config;
 
 		mmhub_read_system_context(adev, &pa_config);
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
index cd025c12f17b..330edd666b7d 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c
@@ -1561,7 +1561,7 @@ bool dc_link_dp_perform_link_training_skip_aux(
 	struct dc_link *link,
 	const struct dc_link_settings *link_setting)
 {
-	struct link_training_settings lt_settings;
+	struct link_training_settings lt_settings = {0};
 
 	dp_decide_training_settings(
 			link,
@@ -1707,7 +1707,7 @@ enum link_training_result dc_link_dp_perform_link_training(
 	bool skip_video_pattern)
 {
 	enum link_training_result status = LINK_TRAINING_SUCCESS;
-	struct link_training_settings lt_settings;
+	struct link_training_settings lt_settings = {0};
 	enum dp_link_encoding encoding =
 			dp_get_link_encoding_format(link_settings);
 
@@ -1923,7 +1923,7 @@ enum link_training_result dc_link_dp_sync_lt_attempt(
     struct dc_link_settings *link_settings,
     struct dc_link_training_overrides *lt_overrides)
 {
-	struct link_training_settings lt_settings;
+	struct link_training_settings lt_settings = {0};
 	enum link_training_result lt_status = LINK_TRAINING_SUCCESS;
 	enum dp_panel_mode panel_mode = DP_PANEL_MODE_DEFAULT;
 	enum clock_source_id dp_cs_id = CLOCK_SOURCE_ID_EXTERNAL;
diff --git a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
index dc7823d23ba8..dd38796ba30a 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn303/dcn303_resource.c
@@ -510,8 +510,12 @@ static struct stream_encoder *dcn303_stream_encoder_create(enum engine_id eng_id
 	vpg = dcn303_vpg_create(ctx, vpg_inst);
 	afmt = dcn303_afmt_create(ctx, afmt_inst);
 
-	if (!enc1 || !vpg || !afmt)
+	if (!enc1 || !vpg || !afmt) {
+		kfree(enc1);
+		kfree(vpg);
+		kfree(afmt);
 		return NULL;
+	}
 
 	dcn30_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios, eng_id, vpg, afmt, &stream_enc_regs[eng_id],
 			&se_shift, &se_mask);
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
index 7db268da6976..3b3721386571 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c
@@ -109,7 +109,7 @@ bool dcn31_is_panel_backlight_on(struct panel_cntl *panel_cntl)
 	union dmub_rb_cmd cmd;
 
 	if (!dcn31_query_backlight_info(panel_cntl, &cmd))
-		return 0;
+		return false;
 
 	return cmd.panel_cntl.data.is_backlight_on;
 }
@@ -119,7 +119,7 @@ bool dcn31_is_panel_powered_on(struct panel_cntl *panel_cntl)
 	union dmub_rb_cmd cmd;
 
 	if (!dcn31_query_backlight_info(panel_cntl, &cmd))
-		return 0;
+		return false;
 
 	return cmd.panel_cntl.data.is_powered_on;
 }
diff --git a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
index fbed5304692d..63bbdf8b8678 100644
--- a/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
+++ b/drivers/gpu/drm/amd/display/dc/dml/dcn20/display_mode_vba_20v2.c
@@ -2641,7 +2641,7 @@ static void dml20v2_DISPCLKDPPCLKDCFCLKDeepSleepPrefetchParametersWatermarksAndP
 		for (k = 0; k < mode_lib->vba.NumberOfActivePlanes; ++k) {
 			if (mode_lib->vba.PrefetchMode[mode_lib->vba.VoltageLevel][mode_lib->vba.maxMpcComb] == 0) {
 				if (mode_lib->vba.DRAMClockChangeWatermark >
-				dml_max(mode_lib->vba.StutterEnterPlusExitWatermark, mode_lib->vba.UrgentWatermark))
+					dml_max(mode_lib->vba.StutterEnterPlusExitWatermark, mode_lib->vba.UrgentWatermark))
 					mode_lib->vba.MinTTUVBlank[k] += 25;
 			}
 		}
diff --git a/drivers/gpu/drm/amd/pm/amdgpu_pm.c b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
index 2d55627b05b1..249cb0aeb5ae 100644
--- a/drivers/gpu/drm/amd/pm/amdgpu_pm.c
+++ b/drivers/gpu/drm/amd/pm/amdgpu_pm.c
@@ -2005,10 +2005,10 @@ static int ss_bias_attr_update(struct amdgpu_device *adev, struct amdgpu_device_
 static struct amdgpu_device_attr amdgpu_device_attrs[] = {
 	AMDGPU_DEVICE_ATTR_RW(power_dpm_state,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
 	AMDGPU_DEVICE_ATTR_RW(power_dpm_force_performance_level,	ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
-	AMDGPU_DEVICE_ATTR_RO(pp_num_states,				ATTR_FLAG_BASIC),
-	AMDGPU_DEVICE_ATTR_RO(pp_cur_state,				ATTR_FLAG_BASIC),
-	AMDGPU_DEVICE_ATTR_RW(pp_force_state,				ATTR_FLAG_BASIC),
-	AMDGPU_DEVICE_ATTR_RW(pp_table,					ATTR_FLAG_BASIC),
+	AMDGPU_DEVICE_ATTR_RO(pp_num_states,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
+	AMDGPU_DEVICE_ATTR_RO(pp_cur_state,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
+	AMDGPU_DEVICE_ATTR_RW(pp_force_state,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
+	AMDGPU_DEVICE_ATTR_RW(pp_table,					ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
 	AMDGPU_DEVICE_ATTR_RW(pp_dpm_sclk,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
 	AMDGPU_DEVICE_ATTR_RW(pp_dpm_mclk,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
 	AMDGPU_DEVICE_ATTR_RW(pp_dpm_socclk,				ATTR_FLAG_BASIC|ATTR_FLAG_ONEVF),
diff --git a/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h b/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
index 715b4225f5ee..8156729c370b 100644
--- a/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
+++ b/drivers/gpu/drm/amd/pm/inc/amdgpu_smu.h
@@ -1335,6 +1335,30 @@ enum smu_cmn2asic_mapping_type {
 #define WORKLOAD_MAP(profile, workload) \
 	[profile] = {1, (workload)}
 
+/**
+ * smu_memcpy_trailing - Copy the end of one structure into the middle of another
+ *
+ * @dst: Pointer to destination struct
+ * @first_dst_member: The member name in @dst where the overwrite begins
+ * @last_dst_member: The member name in @dst where the overwrite ends after
+ * @src: Pointer to the source struct
+ * @first_src_member: The member name in @src where the copy begins
+ *
+ */
+#define smu_memcpy_trailing(dst, first_dst_member, last_dst_member,	   \
+			    src, first_src_member)			   \
+({									   \
+	size_t __src_offset = offsetof(typeof(*(src)), first_src_member);  \
+	size_t __src_size = sizeof(*(src)) - __src_offset;		   \
+	size_t __dst_offset = offsetof(typeof(*(dst)), first_dst_member);  \
+	size_t __dst_size = offsetofend(typeof(*(dst)), last_dst_member) - \
+			    __dst_offset;				   \
+	BUILD_BUG_ON(__src_size != __dst_size);				   \
+	__builtin_memcpy((u8 *)(dst) + __dst_offset,			   \
+			 (u8 *)(src) + __src_offset,			   \
+			 __dst_size);					   \
+})
+
 #if !defined(SWSMU_CODE_LAYER_L2) && !defined(SWSMU_CODE_LAYER_L3) && !defined(SWSMU_CODE_LAYER_L4)
 int smu_get_power_limit(void *handle,
 			uint32_t *limit,
diff --git a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c
index 465ff8d2a01a..e7803ce8f67a 100644
--- a/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c
+++ b/drivers/gpu/drm/amd/pm/powerplay/hwmgr/smu7_hwmgr.c
@@ -27,6 +27,9 @@
 #include <linux/pci.h>
 #include <linux/slab.h>
 #include <asm/div64.h>
+#if IS_ENABLED(CONFIG_X86_64)
+#include <asm/intel-family.h>
+#endif
 #include <drm/amdgpu_drm.h>
 #include "ppatomctrl.h"
 #include "atombios.h"
@@ -1733,6 +1736,17 @@ static int smu7_disable_dpm_tasks(struct pp_hwmgr *hwmgr)
 	return result;
 }
 
+static bool intel_core_rkl_chk(void)
+{
+#if IS_ENABLED(CONFIG_X86_64)
+	struct cpuinfo_x86 *c = &cpu_data(0);
+
+	return (c->x86 == 6 && c->x86_model == INTEL_FAM6_ROCKETLAKE);
+#else
+	return false;
+#endif
+}
+
 static void smu7_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 {
 	struct smu7_hwmgr *data = (struct smu7_hwmgr *)(hwmgr->backend);
@@ -1758,7 +1772,8 @@ static void smu7_init_dpm_defaults(struct pp_hwmgr *hwmgr)
 
 	data->mclk_dpm_key_disabled = hwmgr->feature_mask & PP_MCLK_DPM_MASK ? false : true;
 	data->sclk_dpm_key_disabled = hwmgr->feature_mask & PP_SCLK_DPM_MASK ? false : true;
-	data->pcie_dpm_key_disabled = hwmgr->feature_mask & PP_PCIE_DPM_MASK ? false : true;
+	data->pcie_dpm_key_disabled =
+		intel_core_rkl_chk() || !(hwmgr->feature_mask & PP_PCIE_DPM_MASK);
 	/* need to set voltage control types before EVV patching */
 	data->voltage_control = SMU7_VOLTAGE_CONTROL_NONE;
 	data->vddci_control = SMU7_VOLTAGE_CONTROL_NONE;
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
index 273df66cac14..e343cc218990 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/arcturus_ppt.c
@@ -483,10 +483,8 @@ static int arcturus_append_powerplay_table(struct smu_context *smu)
 
 	if ((smc_dpm_table->table_header.format_revision == 4) &&
 	    (smc_dpm_table->table_header.content_revision == 6))
-		memcpy(&smc_pptable->MaxVoltageStepGfx,
-		       &smc_dpm_table->maxvoltagestepgfx,
-		       sizeof(*smc_dpm_table) - offsetof(struct atom_smc_dpm_info_v4_6, maxvoltagestepgfx));
-
+		smu_memcpy_trailing(smc_pptable, MaxVoltageStepGfx, BoardReserved,
+				    smc_dpm_table, maxvoltagestepgfx);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
index f96681700c41..a5fc5d7cb6c7 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/navi10_ppt.c
@@ -431,16 +431,16 @@ static int navi10_append_powerplay_table(struct smu_context *smu)
 
 	switch (smc_dpm_table->table_header.content_revision) {
 	case 5: /* nv10 and nv14 */
-		memcpy(smc_pptable->I2cControllers, smc_dpm_table->I2cControllers,
-			sizeof(*smc_dpm_table) - sizeof(smc_dpm_table->table_header));
+		smu_memcpy_trailing(smc_pptable, I2cControllers, BoardReserved,
+				    smc_dpm_table, I2cControllers);
 		break;
 	case 7: /* nv12 */
 		ret = amdgpu_atombios_get_data_table(adev, index, NULL, NULL, NULL,
 					      (uint8_t **)&smc_dpm_table_v4_7);
 		if (ret)
 			return ret;
-		memcpy(smc_pptable->I2cControllers, smc_dpm_table_v4_7->I2cControllers,
-			sizeof(*smc_dpm_table_v4_7) - sizeof(smc_dpm_table_v4_7->table_header));
+		smu_memcpy_trailing(smc_pptable, I2cControllers, BoardReserved,
+				    smc_dpm_table_v4_7, I2cControllers);
 		break;
 	default:
 		dev_err(smu->adev->dev, "smc_dpm_info with unsupported content revision %d!\n",
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
index 6eb50b05a33c..3a3421452e57 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu11/vangogh_ppt.c
@@ -1869,7 +1869,7 @@ static int vangogh_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM_TAB
 		} else {
 			if (smu->gfx_actual_hard_min_freq > smu->gfx_actual_soft_max_freq) {
 				dev_err(smu->adev->dev,
-					"The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
+					"The setting minimum sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
 					smu->gfx_actual_hard_min_freq,
 					smu->gfx_actual_soft_max_freq);
 				return -EINVAL;
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
index b39138041141..5aa175e12a78 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu12/renoir_ppt.c
@@ -426,7 +426,7 @@ static int renoir_od_edit_dpm_table(struct smu_context *smu,
 		} else {
 			if (smu->gfx_actual_hard_min_freq > smu->gfx_actual_soft_max_freq) {
 				dev_err(smu->adev->dev,
-					"The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
+					"The setting minimum sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
 					smu->gfx_actual_hard_min_freq,
 					smu->gfx_actual_soft_max_freq);
 				return -EINVAL;
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
index ec8c30daf31c..ab652028e003 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/aldebaran_ppt.c
@@ -409,9 +409,8 @@ static int aldebaran_append_powerplay_table(struct smu_context *smu)
 
 	if ((smc_dpm_table->table_header.format_revision == 4) &&
 	    (smc_dpm_table->table_header.content_revision == 10))
-		memcpy(&smc_pptable->GfxMaxCurrent,
-		       &smc_dpm_table->GfxMaxCurrent,
-		       sizeof(*smc_dpm_table) - offsetof(struct atom_smc_dpm_info_v4_10, GfxMaxCurrent));
+		smu_memcpy_trailing(smc_pptable, GfxMaxCurrent, reserved,
+				    smc_dpm_table, GfxMaxCurrent);
 	return 0;
 }
 
diff --git a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
index 0f17c2522c85..627ba2eec7fd 100644
--- a/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
+++ b/drivers/gpu/drm/amd/pm/swsmu/smu13/yellow_carp_ppt.c
@@ -731,7 +731,7 @@ static int yellow_carp_od_edit_dpm_table(struct smu_context *smu, enum PP_OD_DPM
 		} else {
 			if (smu->gfx_actual_hard_min_freq > smu->gfx_actual_soft_max_freq) {
 				dev_err(smu->adev->dev,
-					"The setting minimun sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
+					"The setting minimum sclk (%d) MHz is greater than the setting maximum sclk (%d) MHz\n",
 					smu->gfx_actual_hard_min_freq,
 					smu->gfx_actual_soft_max_freq);
 				return -EINVAL;
diff --git a/drivers/gpu/drm/i915/gt/intel_gt_requests.h b/drivers/gpu/drm/i915/gt/intel_gt_requests.h
index 51dbe0e3294e..d2969f68dd64 100644
--- a/drivers/gpu/drm/i915/gt/intel_gt_requests.h
+++ b/drivers/gpu/drm/i915/gt/intel_gt_requests.h
@@ -6,7 +6,7 @@
 #ifndef INTEL_GT_REQUESTS_H
 #define INTEL_GT_REQUESTS_H
 
-#include <stddef.h>
+#include <linux/stddef.h>
 
 struct intel_engine_cs;
 struct intel_gt;
diff --git a/drivers/gpu/drm/mgag200/mgag200_pll.c b/drivers/gpu/drm/mgag200/mgag200_pll.c
index 7c903cf19c0d..e9ae22b4f813 100644
--- a/drivers/gpu/drm/mgag200/mgag200_pll.c
+++ b/drivers/gpu/drm/mgag200/mgag200_pll.c
@@ -124,6 +124,7 @@ static int mgag200_pixpll_compute_g200se_00(struct mgag200_pll *pixpll, long clo
 	unsigned int computed;
 
 	m = n = p = s = 0;
+	delta = 0xffffffff;
 	permitteddelta = clock * 5 / 1000;
 
 	for (testp = 8; testp > 0; testp /= 2) {
diff --git a/drivers/gpu/drm/panfrost/panfrost_mmu.c b/drivers/gpu/drm/panfrost/panfrost_mmu.c
index 0da5b3100ab1..dfe5f1d29763 100644
--- a/drivers/gpu/drm/panfrost/panfrost_mmu.c
+++ b/drivers/gpu/drm/panfrost/panfrost_mmu.c
@@ -58,25 +58,16 @@ static int write_cmd(struct panfrost_device *pfdev, u32 as_nr, u32 cmd)
 }
 
 static void lock_region(struct panfrost_device *pfdev, u32 as_nr,
-			u64 iova, size_t size)
+			u64 iova, u64 size)
 {
 	u8 region_width;
 	u64 region = iova & PAGE_MASK;
-	/*
-	 * fls returns:
-	 * 1 .. 32
-	 *
-	 * 10 + fls(num_pages)
-	 * results in the range (11 .. 42)
-	 */
-
-	size = round_up(size, PAGE_SIZE);
 
-	region_width = 10 + fls(size >> PAGE_SHIFT);
-	if ((size >> PAGE_SHIFT) != (1ul << (region_width - 11))) {
-		/* not pow2, so must go up to the next pow2 */
-		region_width += 1;
-	}
+	/* The size is encoded as ceil(log2) minus(1), which may be calculated
+	 * with fls. The size must be clamped to hardware bounds.
+	 */
+	size = max_t(u64, size, AS_LOCK_REGION_MIN_SIZE);
+	region_width = fls64(size - 1) - 1;
 	region |= region_width;
 
 	/* Lock the region that needs to be updated */
@@ -87,7 +78,7 @@ static void lock_region(struct panfrost_device *pfdev, u32 as_nr,
 
 
 static int mmu_hw_do_operation_locked(struct panfrost_device *pfdev, int as_nr,
-				      u64 iova, size_t size, u32 op)
+				      u64 iova, u64 size, u32 op)
 {
 	if (as_nr < 0)
 		return 0;
@@ -104,7 +95,7 @@ static int mmu_hw_do_operation_locked(struct panfrost_device *pfdev, int as_nr,
 
 static int mmu_hw_do_operation(struct panfrost_device *pfdev,
 			       struct panfrost_mmu *mmu,
-			       u64 iova, size_t size, u32 op)
+			       u64 iova, u64 size, u32 op)
 {
 	int ret;
 
@@ -121,7 +112,7 @@ static void panfrost_mmu_enable(struct panfrost_device *pfdev, struct panfrost_m
 	u64 transtab = cfg->arm_mali_lpae_cfg.transtab;
 	u64 memattr = cfg->arm_mali_lpae_cfg.memattr;
 
-	mmu_hw_do_operation_locked(pfdev, as_nr, 0, ~0UL, AS_COMMAND_FLUSH_MEM);
+	mmu_hw_do_operation_locked(pfdev, as_nr, 0, ~0ULL, AS_COMMAND_FLUSH_MEM);
 
 	mmu_write(pfdev, AS_TRANSTAB_LO(as_nr), transtab & 0xffffffffUL);
 	mmu_write(pfdev, AS_TRANSTAB_HI(as_nr), transtab >> 32);
@@ -137,7 +128,7 @@ static void panfrost_mmu_enable(struct panfrost_device *pfdev, struct panfrost_m
 
 static void panfrost_mmu_disable(struct panfrost_device *pfdev, u32 as_nr)
 {
-	mmu_hw_do_operation_locked(pfdev, as_nr, 0, ~0UL, AS_COMMAND_FLUSH_MEM);
+	mmu_hw_do_operation_locked(pfdev, as_nr, 0, ~0ULL, AS_COMMAND_FLUSH_MEM);
 
 	mmu_write(pfdev, AS_TRANSTAB_LO(as_nr), 0);
 	mmu_write(pfdev, AS_TRANSTAB_HI(as_nr), 0);
@@ -251,7 +242,7 @@ static size_t get_pgsize(u64 addr, size_t size)
 
 static void panfrost_mmu_flush_range(struct panfrost_device *pfdev,
 				     struct panfrost_mmu *mmu,
-				     u64 iova, size_t size)
+				     u64 iova, u64 size)
 {
 	if (mmu->as < 0)
 		return;
diff --git a/drivers/gpu/drm/panfrost/panfrost_regs.h b/drivers/gpu/drm/panfrost/panfrost_regs.h
index 1940ff86e49a..6c5a11ef1ee8 100644
--- a/drivers/gpu/drm/panfrost/panfrost_regs.h
+++ b/drivers/gpu/drm/panfrost/panfrost_regs.h
@@ -316,6 +316,8 @@
 #define AS_FAULTSTATUS_ACCESS_TYPE_READ		(0x2 << 8)
 #define AS_FAULTSTATUS_ACCESS_TYPE_WRITE	(0x3 << 8)
 
+#define AS_LOCK_REGION_MIN_SIZE                 (1ULL << 15)
+
 #define gpu_write(dev, reg, data) writel(data, dev->iomem + reg)
 #define gpu_read(dev, reg) readl(dev->iomem + reg)
 
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index ea4add2b9717..bb9e02c31946 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -1160,9 +1160,9 @@ int ttm_bo_swapout(struct ttm_buffer_object *bo, struct ttm_operation_ctx *ctx,
 	}
 
 	if (bo->deleted) {
-		ttm_bo_cleanup_refs(bo, false, false, locked);
+		ret = ttm_bo_cleanup_refs(bo, false, false, locked);
 		ttm_bo_put(bo);
-		return 0;
+		return ret == -EBUSY ? -ENOSPC : ret;
 	}
 
 	ttm_bo_del_from_lru(bo);
@@ -1216,7 +1216,7 @@ out:
 	if (locked)
 		dma_resv_unlock(bo->base.resv);
 	ttm_bo_put(bo);
-	return ret;
+	return ret == -EBUSY ? -ENOSPC : ret;
 }
 
 void ttm_bo_tt_destroy(struct ttm_buffer_object *bo)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index 763fa6f4e07d..1c5ffe2935af 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -143,7 +143,6 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 	struct ttm_resource *src_mem = bo->resource;
 	struct ttm_resource_manager *src_man =
 		ttm_manager_type(bdev, src_mem->mem_type);
-	struct ttm_resource src_copy = *src_mem;
 	union {
 		struct ttm_kmap_iter_tt tt;
 		struct ttm_kmap_iter_linear_io io;
@@ -173,11 +172,11 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 	}
 
 	ttm_move_memcpy(bo, dst_mem->num_pages, dst_iter, src_iter);
-	src_copy = *src_mem;
-	ttm_bo_move_sync_cleanup(bo, dst_mem);
 
 	if (!src_iter->ops->maps_tt)
-		ttm_kmap_iter_linear_io_fini(&_src_iter.io, bdev, &src_copy);
+		ttm_kmap_iter_linear_io_fini(&_src_iter.io, bdev, src_mem);
+	ttm_bo_move_sync_cleanup(bo, dst_mem);
+
 out_src_iter:
 	if (!dst_iter->ops->maps_tt)
 		ttm_kmap_iter_linear_io_fini(&_dst_iter.io, bdev, dst_mem);
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 24031a8acd2d..d5cd8b5dc0bf 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -32,7 +32,6 @@
 #define pr_fmt(fmt) "[TTM] " fmt
 
 #include <linux/sched.h>
-#include <linux/pagemap.h>
 #include <linux/shmem_fs.h>
 #include <linux/file.h>
 #include <drm/drm_cache.h>
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index b7dc32a0c9bb..4a1115043114 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -1462,7 +1462,7 @@ static const struct hdmi_codec_ops vc4_hdmi_codec_ops = {
 	.audio_startup = vc4_hdmi_audio_startup,
 };
 
-struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
+static struct hdmi_codec_pdata vc4_hdmi_codec_pdata = {
 	.ops = &vc4_hdmi_codec_ops,
 	.max_i2s_channels = 8,
 	.i2s = 1,
diff --git a/drivers/hwmon/mr75203.c b/drivers/hwmon/mr75203.c
index 18da5a25e89a..868243dba1ee 100644
--- a/drivers/hwmon/mr75203.c
+++ b/drivers/hwmon/mr75203.c
@@ -17,6 +17,7 @@
 #include <linux/property.h>
 #include <linux/regmap.h>
 #include <linux/reset.h>
+#include <linux/units.h>
 
 /* PVT Common register */
 #define PVT_IP_CONFIG	0x04
@@ -37,7 +38,6 @@
 #define CLK_SYNTH_EN		BIT(24)
 #define CLK_SYS_CYCLES_MAX	514
 #define CLK_SYS_CYCLES_MIN	2
-#define HZ_PER_MHZ		1000000L
 
 #define SDIF_DISABLE	0x04
 
diff --git a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
index 043f199e7bc6..9b279937a24e 100644
--- a/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
+++ b/drivers/iio/common/hid-sensors/hid-sensor-attributes.c
@@ -6,12 +6,11 @@
 #include <linux/module.h>
 #include <linux/kernel.h>
 #include <linux/time.h>
+#include <linux/units.h>
 
 #include <linux/hid-sensor-hub.h>
 #include <linux/iio/iio.h>
 
-#define HZ_PER_MHZ	1000000L
-
 static struct {
 	u32 usage_id;
 	int unit; /* 0 for default others from HID sensor spec */
diff --git a/drivers/iio/light/as73211.c b/drivers/iio/light/as73211.c
index 7b32dfaee9b3..3ba2378df3dd 100644
--- a/drivers/iio/light/as73211.c
+++ b/drivers/iio/light/as73211.c
@@ -24,8 +24,7 @@
 #include <linux/module.h>
 #include <linux/mutex.h>
 #include <linux/pm.h>
-
-#define HZ_PER_KHZ 1000
+#include <linux/units.h>
 
 #define AS73211_DRV_NAME "as73211"
 
diff --git a/drivers/infiniband/hw/bnxt_re/ib_verbs.c b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
index 3048862c961c..408dfbcc47b5 100644
--- a/drivers/infiniband/hw/bnxt_re/ib_verbs.c
+++ b/drivers/infiniband/hw/bnxt_re/ib_verbs.c
@@ -1309,7 +1309,7 @@ out:
 static int bnxt_re_create_shadow_gsi(struct bnxt_re_qp *qp,
 				     struct bnxt_re_pd *pd)
 {
-	struct bnxt_re_sqp_entries *sqp_tbl = NULL;
+	struct bnxt_re_sqp_entries *sqp_tbl;
 	struct bnxt_re_dev *rdev;
 	struct bnxt_re_qp *sqp;
 	struct bnxt_re_ah *sah;
@@ -1317,7 +1317,7 @@ static int bnxt_re_create_shadow_gsi(struct bnxt_re_qp *qp,
 
 	rdev = qp->rdev;
 	/* Create a shadow QP to handle the QP1 traffic */
-	sqp_tbl = kzalloc(sizeof(*sqp_tbl) * BNXT_RE_MAX_GSI_SQP_ENTRIES,
+	sqp_tbl = kcalloc(BNXT_RE_MAX_GSI_SQP_ENTRIES, sizeof(*sqp_tbl),
 			  GFP_KERNEL);
 	if (!sqp_tbl)
 		return -ENOMEM;
diff --git a/drivers/infiniband/hw/hfi1/trace.c b/drivers/infiniband/hw/hfi1/trace.c
index d9b5bbb2d011..8302469582c6 100644
--- a/drivers/infiniband/hw/hfi1/trace.c
+++ b/drivers/infiniband/hw/hfi1/trace.c
@@ -488,7 +488,7 @@ struct hfi1_ctxt_hist {
 	atomic_t data[255];
 };
 
-struct hfi1_ctxt_hist hist = {
+static struct hfi1_ctxt_hist hist = {
 	.count = ATOMIC_INIT(0)
 };
 
diff --git a/drivers/infiniband/hw/mlx5/mr.c b/drivers/infiniband/hw/mlx5/mr.c
index a520ac8ab68c..3be36ebbf67a 100644
--- a/drivers/infiniband/hw/mlx5/mr.c
+++ b/drivers/infiniband/hw/mlx5/mr.c
@@ -995,7 +995,7 @@ static struct mlx5_ib_mr *alloc_cacheable_mr(struct ib_pd *pd,
 static void *mlx5_ib_alloc_xlt(size_t *nents, size_t ent_size, gfp_t gfp_mask)
 {
 	const size_t xlt_chunk_align =
-		MLX5_UMR_MTT_ALIGNMENT / sizeof(ent_size);
+		MLX5_UMR_MTT_ALIGNMENT / ent_size;
 	size_t size;
 	void *res = NULL;
 
@@ -1024,7 +1024,7 @@ static void *mlx5_ib_alloc_xlt(size_t *nents, size_t ent_size, gfp_t gfp_mask)
 
 	if (size > MLX5_SPARE_UMR_CHUNK) {
 		size = MLX5_SPARE_UMR_CHUNK;
-		*nents = get_order(size) / ent_size;
+		*nents = size / ent_size;
 		res = (void *)__get_free_pages(gfp_mask | __GFP_NOWARN,
 					       get_order(size));
 		if (res)
diff --git a/drivers/infiniband/hw/qib/qib_sysfs.c b/drivers/infiniband/hw/qib/qib_sysfs.c
index d57e49de6650..452e2355d24e 100644
--- a/drivers/infiniband/hw/qib/qib_sysfs.c
+++ b/drivers/infiniband/hw/qib/qib_sysfs.c
@@ -403,9 +403,11 @@ static ssize_t diagc_attr_store(struct ib_device *ibdev, u32 port_num,
 }
 
 #define QIB_DIAGC_ATTR(N)                                                      \
+	static_assert(&((struct qib_ibport *)0)->rvp.n_##N != (u64 *)NULL);    \
 	static struct qib_diagc_attr qib_diagc_attr_##N = {                    \
 		.attr = __ATTR(N, 0664, diagc_attr_show, diagc_attr_store),    \
-		.counter = &((struct qib_ibport *)0)->rvp.n_##N - (u64 *)0,    \
+		.counter =                                                     \
+			offsetof(struct qib_ibport, rvp.n_##N) / sizeof(u64)   \
 	}
 
 QIB_DIAGC_ATTR(rc_resends);
diff --git a/drivers/input/joystick/analog.c b/drivers/input/joystick/analog.c
index f798922a4598..882c3c8ba399 100644
--- a/drivers/input/joystick/analog.c
+++ b/drivers/input/joystick/analog.c
@@ -28,10 +28,6 @@ MODULE_AUTHOR("Vojtech Pavlik <vojtech@ucw.cz>");
 MODULE_DESCRIPTION(DRIVER_DESC);
 MODULE_LICENSE("GPL");
 
-static bool use_ktime = true;
-module_param(use_ktime, bool, 0400);
-MODULE_PARM_DESC(use_ktime, "Use ktime for measuring I/O speed");
-
 /*
  * Option parsing.
  */
@@ -110,7 +106,6 @@ struct analog_port {
 	char cooked;
 	int bads;
 	int reads;
-	int speed;
 	int loop;
 	int fuzz;
 	int axes[4];
@@ -120,66 +115,6 @@ struct analog_port {
 };
 
 /*
- * Time macros.
- */
-
-#ifdef __i386__
-
-#include <linux/i8253.h>
-
-#define GET_TIME(x)	do { if (boot_cpu_has(X86_FEATURE_TSC)) x = (unsigned int)rdtsc(); else x = get_time_pit(); } while (0)
-#define DELTA(x,y)	(boot_cpu_has(X86_FEATURE_TSC) ? ((y) - (x)) : ((x) - (y) + ((x) < (y) ? PIT_TICK_RATE / HZ : 0)))
-#define TIME_NAME	(boot_cpu_has(X86_FEATURE_TSC)?"TSC":"PIT")
-static unsigned int get_time_pit(void)
-{
-        unsigned long flags;
-        unsigned int count;
-
-        raw_spin_lock_irqsave(&i8253_lock, flags);
-        outb_p(0x00, 0x43);
-        count = inb_p(0x40);
-        count |= inb_p(0x40) << 8;
-        raw_spin_unlock_irqrestore(&i8253_lock, flags);
-
-        return count;
-}
-#elif defined(__x86_64__)
-#define GET_TIME(x)	do { x = (unsigned int)rdtsc(); } while (0)
-#define DELTA(x,y)	((y)-(x))
-#define TIME_NAME	"TSC"
-#elif defined(__alpha__) || defined(CONFIG_ARM) || defined(CONFIG_ARM64) || defined(CONFIG_PPC) || defined(CONFIG_RISCV)
-#define GET_TIME(x)	do { x = get_cycles(); } while (0)
-#define DELTA(x,y)	((y)-(x))
-#define TIME_NAME	"get_cycles"
-#else
-#define FAKE_TIME
-static unsigned long analog_faketime = 0;
-#define GET_TIME(x)     do { x = analog_faketime++; } while(0)
-#define DELTA(x,y)	((y)-(x))
-#define TIME_NAME	"Unreliable"
-#warning Precise timer not defined for this architecture.
-#endif
-
-static inline u64 get_time(void)
-{
-	if (use_ktime) {
-		return ktime_get_ns();
-	} else {
-		unsigned int x;
-		GET_TIME(x);
-		return x;
-	}
-}
-
-static inline unsigned int delta(u64 x, u64 y)
-{
-	if (use_ktime)
-		return y - x;
-	else
-		return DELTA((unsigned int)x, (unsigned int)y);
-}
-
-/*
  * analog_decode() decodes analog joystick data and reports input events.
  */
 
@@ -234,18 +169,18 @@ static void analog_decode(struct analog *analog, int *axes, int *initial, int bu
 static int analog_cooked_read(struct analog_port *port)
 {
 	struct gameport *gameport = port->gameport;
-	u64 time[4], start, loop, now;
+	ktime_t time[4], start, loop, now;
 	unsigned int loopout, timeout;
 	unsigned char data[4], this, last;
 	unsigned long flags;
 	int i, j;
 
 	loopout = (ANALOG_LOOP_TIME * port->loop) / 1000;
-	timeout = ANALOG_MAX_TIME * port->speed;
+	timeout = ANALOG_MAX_TIME * NSEC_PER_MSEC;
 
 	local_irq_save(flags);
 	gameport_trigger(gameport);
-	now = get_time();
+	now = ktime_get();
 	local_irq_restore(flags);
 
 	start = now;
@@ -258,16 +193,16 @@ static int analog_cooked_read(struct analog_port *port)
 
 		local_irq_disable();
 		this = gameport_read(gameport) & port->mask;
-		now = get_time();
+		now = ktime_get();
 		local_irq_restore(flags);
 
-		if ((last ^ this) && (delta(loop, now) < loopout)) {
+		if ((last ^ this) && (ktime_sub(now, loop) < loopout)) {
 			data[i] = last ^ this;
 			time[i] = now;
 			i++;
 		}
 
-	} while (this && (i < 4) && (delta(start, now) < timeout));
+	} while (this && (i < 4) && (ktime_sub(now, start) < timeout));
 
 	this <<= 4;
 
@@ -275,7 +210,7 @@ static int analog_cooked_read(struct analog_port *port)
 		this |= data[i];
 		for (j = 0; j < 4; j++)
 			if (data[i] & (1 << j))
-				port->axes[j] = (delta(start, time[i]) << ANALOG_FUZZ_BITS) / port->loop;
+				port->axes[j] = ((u32)ktime_sub(time[i], start) << ANALOG_FUZZ_BITS) / port->loop;
 	}
 
 	return -(this != port->mask);
@@ -375,38 +310,22 @@ static void analog_calibrate_timer(struct analog_port *port)
 {
 	struct gameport *gameport = port->gameport;
 	unsigned int i, t, tx;
-	u64 t1, t2, t3;
+	ktime_t t1, t2, t3;
 	unsigned long flags;
 
-	if (use_ktime) {
-		port->speed = 1000000;
-	} else {
-		local_irq_save(flags);
-		t1 = get_time();
-#ifdef FAKE_TIME
-		analog_faketime += 830;
-#endif
-		mdelay(1);
-		t2 = get_time();
-		t3 = get_time();
-		local_irq_restore(flags);
-
-		port->speed = delta(t1, t2) - delta(t2, t3);
-	}
-
 	tx = ~0;
 
 	for (i = 0; i < 50; i++) {
 		local_irq_save(flags);
-		t1 = get_time();
+		t1 = ktime_get();
 		for (t = 0; t < 50; t++) {
 			gameport_read(gameport);
-			t2 = get_time();
+			t2 = ktime_get();
 		}
-		t3 = get_time();
+		t3 = ktime_get();
 		local_irq_restore(flags);
 		udelay(i);
-		t = delta(t1, t2) - delta(t2, t3);
+		t = ktime_sub(t2, t1) - ktime_sub(t3, t2);
 		if (t < tx) tx = t;
 	}
 
@@ -611,7 +530,7 @@ static int analog_init_port(struct gameport *gameport, struct gameport_driver *d
 		t = gameport_read(gameport);
 		msleep(ANALOG_MAX_TIME);
 		port->mask = (gameport_read(gameport) ^ t) & t & 0xf;
-		port->fuzz = (port->speed * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
+		port->fuzz = (NSEC_PER_MSEC * ANALOG_FUZZ_MAGIC) / port->loop / 1000 + ANALOG_FUZZ_BITS;
 
 		for (i = 0; i < ANALOG_INIT_RETRIES; i++) {
 			if (!analog_cooked_read(port))
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig
index 40a070a2e7f5..e75650e98c9e 100644
--- a/drivers/input/keyboard/Kconfig
+++ b/drivers/input/keyboard/Kconfig
@@ -210,7 +210,7 @@ config KEYBOARD_LKKBD
 	select SERIO
 	help
 	  Say Y here if you want to use a LK201 or LK401 style serial
-	  keyboard. This keyboard is also useable on PCs if you attach
+	  keyboard. This keyboard is also usable on PCs if you attach
 	  it with the inputattach program. The connector pinout is
 	  described within lkkbd.c.
 
diff --git a/drivers/input/keyboard/adc-keys.c b/drivers/input/keyboard/adc-keys.c
index 6d5be48d1b3d..bf72ab8df817 100644
--- a/drivers/input/keyboard/adc-keys.c
+++ b/drivers/input/keyboard/adc-keys.c
@@ -193,7 +193,7 @@ static const struct of_device_id adc_keys_of_match[] = {
 MODULE_DEVICE_TABLE(of, adc_keys_of_match);
 #endif
 
-static struct platform_driver __refdata adc_keys_driver = {
+static struct platform_driver adc_keys_driver = {
 	.driver = {
 		.name = "adc_keys",
 		.of_match_table = of_match_ptr(adc_keys_of_match),
diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c
index 90a59b973d00..1592da4de336 100644
--- a/drivers/input/keyboard/adp5588-keys.c
+++ b/drivers/input/keyboard/adp5588-keys.c
@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/slab.h>
 
 #include <linux/platform_data/adp5588.h>
diff --git a/drivers/input/keyboard/adp5589-keys.c b/drivers/input/keyboard/adp5589-keys.c
index 654e0476406b..bdd264459a97 100644
--- a/drivers/input/keyboard/adp5589-keys.c
+++ b/drivers/input/keyboard/adp5589-keys.c
@@ -18,7 +18,7 @@
 #include <linux/platform_device.h>
 #include <linux/input.h>
 #include <linux/i2c.h>
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 #include <linux/slab.h>
 
 #include <linux/input/adp5589.h>
diff --git a/drivers/input/keyboard/ep93xx_keypad.c b/drivers/input/keyboard/ep93xx_keypad.c
index c8194333d612..e0e931e796fa 100644
--- a/drivers/input/keyboard/ep93xx_keypad.c
+++ b/drivers/input/keyboard/ep93xx_keypad.c
@@ -157,7 +157,7 @@ static int ep93xx_keypad_open(struct input_dev *pdev)
 
 	if (!keypad->enabled) {
 		ep93xx_keypad_config(keypad);
-		clk_enable(keypad->clk);
+		clk_prepare_enable(keypad->clk);
 		keypad->enabled = true;
 	}
 
@@ -169,7 +169,7 @@ static void ep93xx_keypad_close(struct input_dev *pdev)
 	struct ep93xx_keypad *keypad = input_get_drvdata(pdev);
 
 	if (keypad->enabled) {
-		clk_disable(keypad->clk);
+		clk_disable_unprepare(keypad->clk);
 		keypad->enabled = false;
 	}
 }
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 498cde376981..dd5227cf8696 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -309,18 +309,6 @@ config INPUT_GPIO_VIBRA
 	  To compile this driver as a module, choose M here: the module will be
 	  called gpio-vibra.
 
-config INPUT_IXP4XX_BEEPER
-	tristate "IXP4XX Beeper support"
-	depends on ARCH_IXP4XX
-	help
-	  If you say yes here, you can connect a beeper to the
-	  ixp4xx gpio pins. This is used by the LinkSys NSLU2.
-
-	  If unsure, say Y.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called ixp4xx-beeper.
-
 config INPUT_COBALT_BTNS
 	tristate "Cobalt button interface"
 	depends on MIPS_COBALT
@@ -811,16 +799,6 @@ config INPUT_XEN_KBDDEV_FRONTEND
 	  To compile this driver as a module, choose M here: the
 	  module will be called xen-kbdfront.
 
-config INPUT_SIRFSOC_ONKEY
-	tristate "CSR SiRFSoC power on/off/suspend key support"
-	depends on ARCH_SIRF && OF
-	default y
-	help
-	  Say Y here if you want to support for the SiRFSoC power on/off/suspend key
-	  in Linux, after you press the onkey, system will suspend.
-
-	  If unsure, say N.
-
 config INPUT_IDEAPAD_SLIDEBAR
 	tristate "IdeaPad Laptop Slidebar"
 	depends on INPUT
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index f593beed7e05..b92c53a6b5ae 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -44,7 +44,6 @@ obj-$(CONFIG_HP_SDC_RTC)		+= hp_sdc_rtc.o
 obj-$(CONFIG_INPUT_IMS_PCU)		+= ims-pcu.o
 obj-$(CONFIG_INPUT_IQS269A)		+= iqs269a.o
 obj-$(CONFIG_INPUT_IQS626A)		+= iqs626a.o
-obj-$(CONFIG_INPUT_IXP4XX_BEEPER)	+= ixp4xx-beeper.o
 obj-$(CONFIG_INPUT_KEYSPAN_REMOTE)	+= keyspan_remote.o
 obj-$(CONFIG_INPUT_KXTJ9)		+= kxtj9.o
 obj-$(CONFIG_INPUT_M68K_BEEP)		+= m68kspkr.o
@@ -74,7 +73,6 @@ obj-$(CONFIG_INPUT_GPIO_ROTARY_ENCODER)	+= rotary_encoder.o
 obj-$(CONFIG_INPUT_RK805_PWRKEY)	+= rk805-pwrkey.o
 obj-$(CONFIG_INPUT_SC27XX_VIBRA)	+= sc27xx-vibra.o
 obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
-obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
 obj-$(CONFIG_INPUT_STPMIC1_ONKEY)  	+= stpmic1_onkey.o
diff --git a/drivers/input/misc/ixp4xx-beeper.c b/drivers/input/misc/ixp4xx-beeper.c
deleted file mode 100644
index 05018d0c97c7..000000000000
--- a/drivers/input/misc/ixp4xx-beeper.c
+++ /dev/null
@@ -1,183 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Generic IXP4xx beeper driver
- *
- * Copyright (C) 2005 Tower Technologies
- *
- * based on nslu2-io.c
- *  Copyright (C) 2004 Karen Spearel
- *
- * Author: Alessandro Zummo <a.zummo@towertech.it>
- * Maintainers: http://www.nslu2-linux.org/
- */
-
-#include <linux/module.h>
-#include <linux/input.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <mach/hardware.h>
-
-MODULE_AUTHOR("Alessandro Zummo <a.zummo@towertech.it>");
-MODULE_DESCRIPTION("ixp4xx beeper driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ixp4xx-beeper");
-
-static DEFINE_SPINLOCK(beep_lock);
-
-static int ixp4xx_timer2_irq;
-
-static void ixp4xx_spkr_control(unsigned int pin, unsigned int count)
-{
-	unsigned long flags;
-
-	spin_lock_irqsave(&beep_lock, flags);
-
-	if (count) {
-		gpio_direction_output(pin, 0);
-		*IXP4XX_OSRT2 = (count & ~IXP4XX_OST_RELOAD_MASK) | IXP4XX_OST_ENABLE;
-	} else {
-		gpio_direction_output(pin, 1);
-		gpio_direction_input(pin);
-		*IXP4XX_OSRT2 = 0;
-	}
-
-	spin_unlock_irqrestore(&beep_lock, flags);
-}
-
-static int ixp4xx_spkr_event(struct input_dev *dev, unsigned int type, unsigned int code, int value)
-{
-	unsigned int pin = (unsigned int) input_get_drvdata(dev);
-	unsigned int count = 0;
-
-	if (type != EV_SND)
-		return -1;
-
-	switch (code) {
-		case SND_BELL:
-			if (value)
-				value = 1000;
-		case SND_TONE:
-			break;
-		default:
-			return -1;
-	}
-
-	if (value > 20 && value < 32767)
-		count = (ixp4xx_timer_freq / (value * 4)) - 1;
-
-	ixp4xx_spkr_control(pin, count);
-
-	return 0;
-}
-
-static irqreturn_t ixp4xx_spkr_interrupt(int irq, void *dev_id)
-{
-	unsigned int pin = (unsigned int) dev_id;
-
-	/* clear interrupt */
-	*IXP4XX_OSST = IXP4XX_OSST_TIMER_2_PEND;
-
-	/* flip the beeper output */
-	gpio_set_value(pin, !gpio_get_value(pin));
-
-	return IRQ_HANDLED;
-}
-
-static int ixp4xx_spkr_probe(struct platform_device *dev)
-{
-	struct input_dev *input_dev;
-	int irq;
-	int err;
-
-	input_dev = input_allocate_device();
-	if (!input_dev)
-		return -ENOMEM;
-
-	input_set_drvdata(input_dev, (void *) dev->id);
-
-	input_dev->name = "ixp4xx beeper";
-	input_dev->phys = "ixp4xx/gpio";
-	input_dev->id.bustype = BUS_HOST;
-	input_dev->id.vendor  = 0x001f;
-	input_dev->id.product = 0x0001;
-	input_dev->id.version = 0x0100;
-	input_dev->dev.parent = &dev->dev;
-
-	input_dev->evbit[0] = BIT_MASK(EV_SND);
-	input_dev->sndbit[0] = BIT_MASK(SND_BELL) | BIT_MASK(SND_TONE);
-	input_dev->event = ixp4xx_spkr_event;
-
-	irq = platform_get_irq(dev, 0);
-	if (irq < 0) {
-		err = irq;
-		goto err_free_device;
-	}
-
-	err = gpio_request(dev->id, "ixp4-beeper");
-	if (err)
-		goto err_free_device;
-
-	err = request_irq(irq, &ixp4xx_spkr_interrupt,
-			  IRQF_NO_SUSPEND, "ixp4xx-beeper",
-			  (void *) dev->id);
-	if (err)
-		goto err_free_gpio;
-	ixp4xx_timer2_irq = irq;
-
-	err = input_register_device(input_dev);
-	if (err)
-		goto err_free_irq;
-
-	platform_set_drvdata(dev, input_dev);
-
-	return 0;
-
- err_free_irq:
-	free_irq(irq, (void *)dev->id);
- err_free_gpio:
-	gpio_free(dev->id);
- err_free_device:
-	input_free_device(input_dev);
-
-	return err;
-}
-
-static int ixp4xx_spkr_remove(struct platform_device *dev)
-{
-	struct input_dev *input_dev = platform_get_drvdata(dev);
-	unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
-
-	input_unregister_device(input_dev);
-
-	/* turn the speaker off */
-	disable_irq(ixp4xx_timer2_irq);
-	ixp4xx_spkr_control(pin, 0);
-
-	free_irq(ixp4xx_timer2_irq, (void *)dev->id);
-	gpio_free(dev->id);
-
-	return 0;
-}
-
-static void ixp4xx_spkr_shutdown(struct platform_device *dev)
-{
-	struct input_dev *input_dev = platform_get_drvdata(dev);
-	unsigned int pin = (unsigned int) input_get_drvdata(input_dev);
-
-	/* turn off the speaker */
-	disable_irq(ixp4xx_timer2_irq);
-	ixp4xx_spkr_control(pin, 0);
-}
-
-static struct platform_driver ixp4xx_spkr_platform_driver = {
-	.driver		= {
-		.name	= "ixp4xx-beeper",
-	},
-	.probe		= ixp4xx_spkr_probe,
-	.remove		= ixp4xx_spkr_remove,
-	.shutdown	= ixp4xx_spkr_shutdown,
-};
-module_platform_driver(ixp4xx_spkr_platform_driver);
-
diff --git a/drivers/input/misc/pm8941-pwrkey.c b/drivers/input/misc/pm8941-pwrkey.c
index 10e3fc0eac6e..33609603245d 100644
--- a/drivers/input/misc/pm8941-pwrkey.c
+++ b/drivers/input/misc/pm8941-pwrkey.c
@@ -284,7 +284,7 @@ static int pm8941_pwrkey_probe(struct platform_device *pdev)
 	}
 
 	if (pwrkey->data->supports_ps_hold_poff_config) {
-		pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify,
+		pwrkey->reboot_notifier.notifier_call = pm8941_reboot_notify;
 		error = register_reboot_notifier(&pwrkey->reboot_notifier);
 		if (error) {
 			dev_err(&pdev->dev, "failed to register reboot notifier: %d\n",
diff --git a/drivers/input/misc/sirfsoc-onkey.c b/drivers/input/misc/sirfsoc-onkey.c
deleted file mode 100644
index 7982bf8fb839..000000000000
--- a/drivers/input/misc/sirfsoc-onkey.c
+++ /dev/null
@@ -1,207 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Power key driver for SiRF PrimaII
- *
- * Copyright (c) 2013 - 2014 Cambridge Silicon Radio Limited, a CSR plc group
- * company.
- */
-
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/input.h>
-#include <linux/rtc/sirfsoc_rtciobrg.h>
-#include <linux/of.h>
-#include <linux/workqueue.h>
-
-struct sirfsoc_pwrc_drvdata {
-	u32			pwrc_base;
-	struct input_dev	*input;
-	struct delayed_work	work;
-};
-
-#define PWRC_ON_KEY_BIT			(1 << 0)
-
-#define PWRC_INT_STATUS			0xc
-#define PWRC_INT_MASK			0x10
-#define PWRC_PIN_STATUS			0x14
-#define PWRC_KEY_DETECT_UP_TIME		20	/* ms*/
-
-static int sirfsoc_pwrc_is_on_key_down(struct sirfsoc_pwrc_drvdata *pwrcdrv)
-{
-	u32 state = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
-							PWRC_PIN_STATUS);
-	return !(state & PWRC_ON_KEY_BIT); /* ON_KEY is active low */
-}
-
-static void sirfsoc_pwrc_report_event(struct work_struct *work)
-{
-	struct sirfsoc_pwrc_drvdata *pwrcdrv =
-		container_of(work, struct sirfsoc_pwrc_drvdata, work.work);
-
-	if (sirfsoc_pwrc_is_on_key_down(pwrcdrv)) {
-		schedule_delayed_work(&pwrcdrv->work,
-			msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
-	} else {
-		input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 0);
-		input_sync(pwrcdrv->input);
-	}
-}
-
-static irqreturn_t sirfsoc_pwrc_isr(int irq, void *dev_id)
-{
-	struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_id;
-	u32 int_status;
-
-	int_status = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base +
-							PWRC_INT_STATUS);
-	sirfsoc_rtc_iobrg_writel(int_status & ~PWRC_ON_KEY_BIT,
-				 pwrcdrv->pwrc_base + PWRC_INT_STATUS);
-
-	input_event(pwrcdrv->input, EV_KEY, KEY_POWER, 1);
-	input_sync(pwrcdrv->input);
-	schedule_delayed_work(&pwrcdrv->work,
-			      msecs_to_jiffies(PWRC_KEY_DETECT_UP_TIME));
-
-	return IRQ_HANDLED;
-}
-
-static void sirfsoc_pwrc_toggle_interrupts(struct sirfsoc_pwrc_drvdata *pwrcdrv,
-					   bool enable)
-{
-	u32 int_mask;
-
-	int_mask = sirfsoc_rtc_iobrg_readl(pwrcdrv->pwrc_base + PWRC_INT_MASK);
-	if (enable)
-		int_mask |= PWRC_ON_KEY_BIT;
-	else
-		int_mask &= ~PWRC_ON_KEY_BIT;
-	sirfsoc_rtc_iobrg_writel(int_mask, pwrcdrv->pwrc_base + PWRC_INT_MASK);
-}
-
-static int sirfsoc_pwrc_open(struct input_dev *input)
-{
-	struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
-
-	sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
-
-	return 0;
-}
-
-static void sirfsoc_pwrc_close(struct input_dev *input)
-{
-	struct sirfsoc_pwrc_drvdata *pwrcdrv = input_get_drvdata(input);
-
-	sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
-	cancel_delayed_work_sync(&pwrcdrv->work);
-}
-
-static const struct of_device_id sirfsoc_pwrc_of_match[] = {
-	{ .compatible = "sirf,prima2-pwrc" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, sirfsoc_pwrc_of_match);
-
-static int sirfsoc_pwrc_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct sirfsoc_pwrc_drvdata *pwrcdrv;
-	int irq;
-	int error;
-
-	pwrcdrv = devm_kzalloc(&pdev->dev, sizeof(struct sirfsoc_pwrc_drvdata),
-			       GFP_KERNEL);
-	if (!pwrcdrv) {
-		dev_info(&pdev->dev, "Not enough memory for the device data\n");
-		return -ENOMEM;
-	}
-
-	/*
-	 * We can't use of_iomap because pwrc is not mapped in memory,
-	 * the so-called base address is only offset in rtciobrg
-	 */
-	error = of_property_read_u32(np, "reg", &pwrcdrv->pwrc_base);
-	if (error) {
-		dev_err(&pdev->dev,
-			"unable to find base address of pwrc node in dtb\n");
-		return error;
-	}
-
-	pwrcdrv->input = devm_input_allocate_device(&pdev->dev);
-	if (!pwrcdrv->input)
-		return -ENOMEM;
-
-	pwrcdrv->input->name = "sirfsoc pwrckey";
-	pwrcdrv->input->phys = "pwrc/input0";
-	pwrcdrv->input->evbit[0] = BIT_MASK(EV_KEY);
-	input_set_capability(pwrcdrv->input, EV_KEY, KEY_POWER);
-
-	INIT_DELAYED_WORK(&pwrcdrv->work, sirfsoc_pwrc_report_event);
-
-	pwrcdrv->input->open = sirfsoc_pwrc_open;
-	pwrcdrv->input->close = sirfsoc_pwrc_close;
-
-	input_set_drvdata(pwrcdrv->input, pwrcdrv);
-
-	/* Make sure the device is quiesced */
-	sirfsoc_pwrc_toggle_interrupts(pwrcdrv, false);
-
-	irq = platform_get_irq(pdev, 0);
-	error = devm_request_irq(&pdev->dev, irq,
-				 sirfsoc_pwrc_isr, 0,
-				 "sirfsoc_pwrc_int", pwrcdrv);
-	if (error) {
-		dev_err(&pdev->dev, "unable to claim irq %d, error: %d\n",
-			irq, error);
-		return error;
-	}
-
-	error = input_register_device(pwrcdrv->input);
-	if (error) {
-		dev_err(&pdev->dev,
-			"unable to register input device, error: %d\n",
-			error);
-		return error;
-	}
-
-	dev_set_drvdata(&pdev->dev, pwrcdrv);
-	device_init_wakeup(&pdev->dev, 1);
-
-	return 0;
-}
-
-static int __maybe_unused sirfsoc_pwrc_resume(struct device *dev)
-{
-	struct sirfsoc_pwrc_drvdata *pwrcdrv = dev_get_drvdata(dev);
-	struct input_dev *input = pwrcdrv->input;
-
-	/*
-	 * Do not mask pwrc interrupt as we want pwrc work as a wakeup source
-	 * if users touch X_ONKEY_B, see arch/arm/mach-prima2/pm.c
-	 */
-	mutex_lock(&input->mutex);
-	if (input_device_enabled(input))
-		sirfsoc_pwrc_toggle_interrupts(pwrcdrv, true);
-	mutex_unlock(&input->mutex);
-
-	return 0;
-}
-
-static SIMPLE_DEV_PM_OPS(sirfsoc_pwrc_pm_ops, NULL, sirfsoc_pwrc_resume);
-
-static struct platform_driver sirfsoc_pwrc_driver = {
-	.probe		= sirfsoc_pwrc_probe,
-	.driver		= {
-		.name	= "sirfsoc-pwrc",
-		.pm	= &sirfsoc_pwrc_pm_ops,
-		.of_match_table = sirfsoc_pwrc_of_match,
-	}
-};
-
-module_platform_driver(sirfsoc_pwrc_driver);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Binghua Duan <Binghua.Duan@csr.com>, Xianglong Du <Xianglong.Du@csr.com>");
-MODULE_DESCRIPTION("CSR Prima2 PWRC Driver");
-MODULE_ALIAS("platform:sirfsoc-pwrc");
diff --git a/drivers/input/mouse/elan_i2c.h b/drivers/input/mouse/elan_i2c.h
index dc4a240f4489..3c84deefa327 100644
--- a/drivers/input/mouse/elan_i2c.h
+++ b/drivers/input/mouse/elan_i2c.h
@@ -55,8 +55,9 @@
 #define ETP_FW_PAGE_SIZE_512	512
 #define ETP_FW_SIGNATURE_SIZE	6
 
-#define ETP_PRODUCT_ID_DELBIN	0x00C2
+#define ETP_PRODUCT_ID_WHITEBOX	0x00B8
 #define ETP_PRODUCT_ID_VOXEL	0x00BF
+#define ETP_PRODUCT_ID_DELBIN	0x00C2
 #define ETP_PRODUCT_ID_MAGPIE	0x0120
 #define ETP_PRODUCT_ID_BOBBA	0x0121
 
diff --git a/drivers/input/mouse/elan_i2c_core.c b/drivers/input/mouse/elan_i2c_core.c
index dad22c1ea6a0..47af62c12267 100644
--- a/drivers/input/mouse/elan_i2c_core.c
+++ b/drivers/input/mouse/elan_i2c_core.c
@@ -105,6 +105,7 @@ static u32 elan_i2c_lookup_quirks(u16 ic_type, u16 product_id)
 		u32 quirks;
 	} elan_i2c_quirks[] = {
 		{ 0x0D, ETP_PRODUCT_ID_DELBIN, ETP_QUIRK_QUICK_WAKEUP },
+		{ 0x0D, ETP_PRODUCT_ID_WHITEBOX, ETP_QUIRK_QUICK_WAKEUP },
 		{ 0x10, ETP_PRODUCT_ID_VOXEL, ETP_QUIRK_QUICK_WAKEUP },
 		{ 0x14, ETP_PRODUCT_ID_MAGPIE, ETP_QUIRK_QUICK_WAKEUP },
 		{ 0x14, ETP_PRODUCT_ID_BOBBA, ETP_QUIRK_QUICK_WAKEUP },
diff --git a/drivers/input/serio/parkbd.c b/drivers/input/serio/parkbd.c
index 3ac57a91ede4..51b68501896c 100644
--- a/drivers/input/serio/parkbd.c
+++ b/drivers/input/serio/parkbd.c
@@ -220,16 +220,4 @@ static struct parport_driver parkbd_parport_driver = {
 	.detach = parkbd_detach,
 	.devmodel = true,
 };
-
-static int __init parkbd_init(void)
-{
-	return parport_register_driver(&parkbd_parport_driver);
-}
-
-static void __exit parkbd_exit(void)
-{
-	parport_unregister_driver(&parkbd_parport_driver);
-}
-
-module_init(parkbd_init);
-module_exit(parkbd_exit);
+module_parport_driver(parkbd_parport_driver);
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index ad454cd2855a..d4e74738c5a8 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -932,7 +932,7 @@ config TOUCHSCREEN_USB_COMPOSITE
 	  - JASTEC USB Touch Controller/DigiTech DTR-02U
 	  - Zytronic controllers
 	  - Elo TouchSystems 2700 IntelliTouch
-	  - EasyTouch USB Touch Controller from Data Modul
+	  - EasyTouch USB Touch Controller from Data Module
 	  - e2i (Mimo monitors)
 
 	  Have a look at <http://linux.chapter7.ch/touchkit/> for
diff --git a/drivers/input/touchscreen/edt-ft5x06.c b/drivers/input/touchscreen/edt-ft5x06.c
index 263de3bfb6cd..bb2e1cbffba7 100644
--- a/drivers/input/touchscreen/edt-ft5x06.c
+++ b/drivers/input/touchscreen/edt-ft5x06.c
@@ -899,6 +899,7 @@ static int edt_ft5x06_ts_identify(struct i2c_client *client,
 		 * the identification registers.
 		 */
 		switch (rdbuf[0]) {
+		case 0x11:   /* EDT EP0110M09 */
 		case 0x35:   /* EDT EP0350M09 */
 		case 0x43:   /* EDT EP0430M09 */
 		case 0x50:   /* EDT EP0500M09 */
diff --git a/drivers/input/touchscreen/mms114.c b/drivers/input/touchscreen/mms114.c
index 0efd1a1bb192..9fa3b0e421be 100644
--- a/drivers/input/touchscreen/mms114.c
+++ b/drivers/input/touchscreen/mms114.c
@@ -54,6 +54,7 @@
 
 enum mms_type {
 	TYPE_MMS114	= 114,
+	TYPE_MMS134S	= 134,
 	TYPE_MMS136	= 136,
 	TYPE_MMS152	= 152,
 	TYPE_MMS345L	= 345,
@@ -212,7 +213,7 @@ static irqreturn_t mms114_interrupt(int irq, void *dev_id)
 		goto out;
 
 	/* MMS136 has slightly different event size */
-	if (data->type == TYPE_MMS136)
+	if (data->type == TYPE_MMS134S || data->type == TYPE_MMS136)
 		touch_size = packet_size / MMS136_EVENT_SIZE;
 	else
 		touch_size = packet_size / MMS114_EVENT_SIZE;
@@ -281,6 +282,7 @@ static int mms114_get_version(struct mms114_data *data)
 		break;
 
 	case TYPE_MMS114:
+	case TYPE_MMS134S:
 	case TYPE_MMS136:
 		error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
 		if (error)
@@ -304,8 +306,9 @@ static int mms114_setup_regs(struct mms114_data *data)
 	if (error < 0)
 		return error;
 
-	/* Only MMS114 and MMS136 have configuration and power on registers */
-	if (data->type != TYPE_MMS114 && data->type != TYPE_MMS136)
+	/* MMS114, MMS134S and MMS136 have configuration and power on registers */
+	if (data->type != TYPE_MMS114 && data->type != TYPE_MMS134S &&
+	    data->type != TYPE_MMS136)
 		return 0;
 
 	error = mms114_set_active(data, true);
@@ -487,7 +490,8 @@ static int mms114_probe(struct i2c_client *client,
 				     0, data->props.max_y, 0, 0);
 	}
 
-	if (data->type == TYPE_MMS114 || data->type == TYPE_MMS136) {
+	if (data->type == TYPE_MMS114 || data->type == TYPE_MMS134S ||
+	    data->type == TYPE_MMS136) {
 		/*
 		 * The firmware handles movement and pressure fuzz, so
 		 * don't duplicate that in software.
@@ -612,6 +616,9 @@ static const struct of_device_id mms114_dt_match[] = {
 		.compatible = "melfas,mms114",
 		.data = (void *)TYPE_MMS114,
 	}, {
+		.compatible = "melfas,mms134s",
+		.data = (void *)TYPE_MMS134S,
+	}, {
 		.compatible = "melfas,mms136",
 		.data = (void *)TYPE_MMS136,
 	}, {
diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 8ad8618b3530..124c41adeca1 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -82,7 +82,7 @@ config IOMMU_DEBUGFS
 choice
 	prompt "IOMMU default domain type"
 	depends on IOMMU_API
-	default IOMMU_DEFAULT_DMA_LAZY if AMD_IOMMU || INTEL_IOMMU
+	default IOMMU_DEFAULT_DMA_LAZY if X86 || IA64
 	default IOMMU_DEFAULT_DMA_STRICT
 	help
 	  Choose the type of IOMMU domain used to manage DMA API usage by
diff --git a/drivers/iommu/amd/init.c b/drivers/iommu/amd/init.c
index bdcf167b4afe..2a822b229bd0 100644
--- a/drivers/iommu/amd/init.c
+++ b/drivers/iommu/amd/init.c
@@ -297,6 +297,22 @@ int amd_iommu_get_num_iommus(void)
 	return amd_iommus_present;
 }
 
+#ifdef CONFIG_IRQ_REMAP
+static bool check_feature_on_all_iommus(u64 mask)
+{
+	bool ret = false;
+	struct amd_iommu *iommu;
+
+	for_each_iommu(iommu) {
+		ret = iommu_feature(iommu, mask);
+		if (!ret)
+			return false;
+	}
+
+	return true;
+}
+#endif
+
 /*
  * For IVHD type 0x11/0x40, EFR is also available via IVHD.
  * Default to IVHD EFR since it is available sooner
@@ -813,9 +829,9 @@ static int iommu_ga_log_enable(struct amd_iommu *iommu)
 	return 0;
 }
 
-#ifdef CONFIG_IRQ_REMAP
 static int iommu_init_ga_log(struct amd_iommu *iommu)
 {
+#ifdef CONFIG_IRQ_REMAP
 	u64 entry;
 
 	if (!AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
@@ -845,25 +861,9 @@ static int iommu_init_ga_log(struct amd_iommu *iommu)
 err_out:
 	free_ga_log(iommu);
 	return -EINVAL;
-}
-#endif /* CONFIG_IRQ_REMAP */
-
-static int iommu_init_ga(struct amd_iommu *iommu)
-{
-	int ret = 0;
-
-#ifdef CONFIG_IRQ_REMAP
-	/* Note: We have already checked GASup from IVRS table.
-	 *       Now, we need to make sure that GAMSup is set.
-	 */
-	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir) &&
-	    !iommu_feature(iommu, FEATURE_GAM_VAPIC))
-		amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
-
-	ret = iommu_init_ga_log(iommu);
+#else
+	return 0;
 #endif /* CONFIG_IRQ_REMAP */
-
-	return ret;
 }
 
 static int __init alloc_cwwb_sem(struct amd_iommu *iommu)
@@ -1845,7 +1845,7 @@ static int __init iommu_init_pci(struct amd_iommu *iommu)
 	if (iommu_feature(iommu, FEATURE_PPR) && alloc_ppr_log(iommu))
 		return -ENOMEM;
 
-	ret = iommu_init_ga(iommu);
+	ret = iommu_init_ga_log(iommu);
 	if (ret)
 		return ret;
 
@@ -2479,6 +2479,14 @@ static void early_enable_iommus(void)
 	}
 
 #ifdef CONFIG_IRQ_REMAP
+	/*
+	 * Note: We have already checked GASup from IVRS table.
+	 *       Now, we need to make sure that GAMSup is set.
+	 */
+	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir) &&
+	    !check_feature_on_all_iommus(FEATURE_GAM_VAPIC))
+		amd_iommu_guest_ir = AMD_IOMMU_GUEST_IR_LEGACY_GA;
+
 	if (AMD_IOMMU_GUEST_IR_VAPIC(amd_iommu_guest_ir))
 		amd_iommu_irq_ops.capability |= (1 << IRQ_POSTING_CAP);
 #endif
diff --git a/drivers/iommu/intel/svm.c b/drivers/iommu/intel/svm.c
index 2014fe8695ac..0c228787704f 100644
--- a/drivers/iommu/intel/svm.c
+++ b/drivers/iommu/intel/svm.c
@@ -514,9 +514,6 @@ static void load_pasid(struct mm_struct *mm, u32 pasid)
 {
 	mutex_lock(&mm->context.lock);
 
-	/* Synchronize with READ_ONCE in update_pasid(). */
-	smp_store_release(&mm->pasid, pasid);
-
 	/* Update PASID MSR on all CPUs running the mm's tasks. */
 	on_each_cpu_mask(mm_cpumask(mm), _load_pasid, NULL, true);
 
@@ -792,7 +789,19 @@ prq_retry:
 		goto prq_retry;
 	}
 
+	/*
+	 * A work in IO page fault workqueue may try to lock pasid_mutex now.
+	 * Holding pasid_mutex while waiting in iopf_queue_flush_dev() for
+	 * all works in the workqueue to finish may cause deadlock.
+	 *
+	 * It's unnecessary to hold pasid_mutex in iopf_queue_flush_dev().
+	 * Unlock it to allow the works to be handled while waiting for
+	 * them to finish.
+	 */
+	lockdep_assert_held(&pasid_mutex);
+	mutex_unlock(&pasid_mutex);
 	iopf_queue_flush_dev(dev);
+	mutex_lock(&pasid_mutex);
 
 	/*
 	 * Perform steps described in VT-d spec CH7.10 to drain page
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index b03eabc1ed7c..2111daaacaba 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -809,14 +809,9 @@ EXPORT_SYMBOL_GPL(dm_table_set_type);
 int device_not_dax_capable(struct dm_target *ti, struct dm_dev *dev,
 			sector_t start, sector_t len, void *data)
 {
-	int blocksize = *(int *) data, id;
-	bool rc;
+	int blocksize = *(int *) data;
 
-	id = dax_read_lock();
-	rc = !dax_supported(dev->dax_dev, dev->bdev, blocksize, start, len);
-	dax_read_unlock(id);
-
-	return rc;
+	return !dax_supported(dev->dax_dev, dev->bdev, blocksize, start, len);
 }
 
 /* Check devices support synchronous DAX */
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 84e9145b1714..a011d09cb0fa 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -654,7 +654,7 @@ static int open_table_device(struct table_device *td, dev_t dev,
 	}
 
 	td->dm_dev.bdev = bdev;
-	td->dm_dev.dax_dev = dax_get_by_host(bdev->bd_disk->disk_name);
+	td->dm_dev.dax_dev = fs_dax_get_by_bdev(bdev);
 	return 0;
 }
 
diff --git a/drivers/media/i2c/ov02a10.c b/drivers/media/i2c/ov02a10.c
index a3ce5500d355..0f08c05333ea 100644
--- a/drivers/media/i2c/ov02a10.c
+++ b/drivers/media/i2c/ov02a10.c
@@ -9,6 +9,7 @@
 #include <linux/module.h>
 #include <linux/pm_runtime.h>
 #include <linux/regulator/consumer.h>
+#include <linux/units.h>
 #include <media/media-entity.h>
 #include <media/v4l2-async.h>
 #include <media/v4l2-ctrls.h>
@@ -64,7 +65,6 @@
 /* Test pattern control */
 #define OV02A10_REG_TEST_PATTERN			0xb6
 
-#define HZ_PER_MHZ					1000000L
 #define OV02A10_LINK_FREQ_390MHZ			(390 * HZ_PER_MHZ)
 #define OV02A10_ECLK_FREQ				(24 * HZ_PER_MHZ)
 
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 01bb42f0ca0b..ca0edab91aeb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -2199,5 +2199,33 @@ config MFD_INTEL_M10_BMC
 	  additional drivers must be enabled in order to use the functionality
 	  of the device.
 
+config MFD_RSMU_I2C
+	tristate "Renesas Synchronization Management Unit with I2C"
+	depends on I2C && OF
+	select MFD_CORE
+	select REGMAP_I2C
+	help
+	  Support for the Renesas Synchronization Management Unit, such as
+	  Clockmatrix and 82P33XXX series. This option supports I2C as
+	  the control interface.
+
+	  This driver provides common support for accessing the device.
+	  Additional drivers must be enabled in order to use the functionality
+	  of the device.
+
+config MFD_RSMU_SPI
+	tristate "Renesas Synchronization Management Unit with SPI"
+	depends on SPI && OF
+	select MFD_CORE
+	select REGMAP_SPI
+	help
+	  Support for the Renesas Synchronization Management Unit, such as
+	  Clockmatrix and 82P33XXX series. This option supports SPI as
+	  the control interface.
+
+	  This driver provides common support for accessing the device.
+	  Additional drivers must be enabled in order to use the functionality
+	  of the device.
+
 endmenu
 endif
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index 570b9ffb34d0..2ba6646e874c 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -273,3 +273,8 @@ obj-$(CONFIG_MFD_INTEL_M10_BMC)   += intel-m10-bmc.o
 
 obj-$(CONFIG_MFD_ATC260X)	+= atc260x-core.o
 obj-$(CONFIG_MFD_ATC260X_I2C)	+= atc260x-i2c.o
+
+rsmu-i2c-objs			:= rsmu_core.o rsmu_i2c.o
+rsmu-spi-objs			:= rsmu_core.o rsmu_spi.o
+obj-$(CONFIG_MFD_RSMU_I2C)	+= rsmu-i2c.o
+obj-$(CONFIG_MFD_RSMU_SPI)	+= rsmu-spi.o
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index 30489670ea52..cca0aac26148 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -485,7 +485,7 @@ static int ab8500_handle_hierarchical_line(struct ab8500 *ab8500,
 		if (line == AB8540_INT_GPIO43F || line == AB8540_INT_GPIO44F)
 			line += 1;
 
-		handle_nested_irq(irq_create_mapping(ab8500->domain, line));
+		handle_nested_irq(irq_find_mapping(ab8500->domain, line));
 	}
 
 	return 0;
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 4145a38b3890..8161a5dc68e8 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -125,12 +125,13 @@ static const struct regmap_range axp288_writeable_ranges[] = {
 
 static const struct regmap_range axp288_volatile_ranges[] = {
 	regmap_reg_range(AXP20X_PWR_INPUT_STATUS, AXP288_POWER_REASON),
+	regmap_reg_range(AXP22X_PWR_OUT_CTRL1, AXP22X_ALDO3_V_OUT),
 	regmap_reg_range(AXP288_BC_GLOBAL, AXP288_BC_GLOBAL),
 	regmap_reg_range(AXP288_BC_DET_STAT, AXP20X_VBUS_IPSOUT_MGMT),
 	regmap_reg_range(AXP20X_CHRG_BAK_CTRL, AXP20X_CHRG_BAK_CTRL),
 	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
 	regmap_reg_range(AXP20X_TIMER_CTRL, AXP20X_TIMER_CTRL),
-	regmap_reg_range(AXP22X_GPIO_STATE, AXP22X_GPIO_STATE),
+	regmap_reg_range(AXP20X_GPIO1_CTRL, AXP22X_GPIO_STATE),
 	regmap_reg_range(AXP288_RT_BATT_V_H, AXP288_RT_BATT_V_L),
 	regmap_reg_range(AXP20X_FG_RES, AXP288_FG_CC_CAP_REG),
 };
@@ -699,6 +700,18 @@ static const struct resource axp288_charger_resources[] = {
 	DEFINE_RES_IRQ(AXP288_IRQ_CBTO),
 };
 
+static const char * const axp288_fuel_gauge_suppliers[] = { "axp288_charger" };
+
+static const struct property_entry axp288_fuel_gauge_properties[] = {
+	PROPERTY_ENTRY_STRING_ARRAY("supplied-from", axp288_fuel_gauge_suppliers),
+	{ }
+};
+
+static const struct software_node axp288_fuel_gauge_sw_node = {
+	.name = "axp288_fuel_gauge",
+	.properties = axp288_fuel_gauge_properties,
+};
+
 static const struct mfd_cell axp288_cells[] = {
 	{
 		.name		= "axp288_adc",
@@ -716,6 +729,7 @@ static const struct mfd_cell axp288_cells[] = {
 		.name		= "axp288_fuel_gauge",
 		.num_resources	= ARRAY_SIZE(axp288_fuel_gauge_resources),
 		.resources	= axp288_fuel_gauge_resources,
+		.swnode		= &axp288_fuel_gauge_sw_node,
 	}, {
 		.name		= "axp221-pek",
 		.num_resources	= ARRAY_SIZE(axp288_power_button_resources),
diff --git a/drivers/mfd/dbx500-prcmu-regs.h b/drivers/mfd/db8500-prcmu-regs.h
index 75fd1069372c..75fd1069372c 100644
--- a/drivers/mfd/dbx500-prcmu-regs.h
+++ b/drivers/mfd/db8500-prcmu-regs.h
diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c
index 287da20f1231..c1d3e7c116cf 100644
--- a/drivers/mfd/db8500-prcmu.c
+++ b/drivers/mfd/db8500-prcmu.c
@@ -37,7 +37,7 @@
 #include <linux/regulator/db8500-prcmu.h>
 #include <linux/regulator/machine.h>
 #include <linux/platform_data/ux500_wdt.h>
-#include "dbx500-prcmu-regs.h"
+#include "db8500-prcmu-regs.h"
 
 /* Index of different voltages to be used when accessing AVSData */
 #define PRCM_AVS_BASE		0x2FC
@@ -1622,22 +1622,20 @@ static long round_clock_rate(u8 clock, unsigned long rate)
 }
 
 static const unsigned long db8500_armss_freqs[] = {
-	200000000,
-	400000000,
-	800000000,
+	199680000,
+	399360000,
+	798720000,
 	998400000
 };
 
 /* The DB8520 has slightly higher ARMSS max frequency */
 static const unsigned long db8520_armss_freqs[] = {
-	200000000,
-	400000000,
-	800000000,
+	199680000,
+	399360000,
+	798720000,
 	1152000000
 };
 
-
-
 static long round_armss_rate(unsigned long rate)
 {
 	unsigned long freq = 0;
@@ -2567,14 +2565,16 @@ static char *fw_project_name(u32 project)
 		return "U8500 C4";
 	case PRCMU_FW_PROJECT_U9500_MBL:
 		return "U9500 MBL";
-	case PRCMU_FW_PROJECT_U8500_MBL:
-		return "U8500 MBL";
+	case PRCMU_FW_PROJECT_U8500_SSG1:
+		return "U8500 Samsung 1";
 	case PRCMU_FW_PROJECT_U8500_MBL2:
 		return "U8500 MBL2";
 	case PRCMU_FW_PROJECT_U8520:
 		return "U8520 MBL";
 	case PRCMU_FW_PROJECT_U8420:
 		return "U8420";
+	case PRCMU_FW_PROJECT_U8500_SSG2:
+		return "U8500 Samsung 2";
 	case PRCMU_FW_PROJECT_U8420_SYSCLK:
 		return "U8420-sysclk";
 	case PRCMU_FW_PROJECT_U9540:
@@ -2951,14 +2951,13 @@ static const struct mfd_cell common_prcmu_devs[] = {
 		.pdata_size = sizeof(db8500_wdt_pdata),
 		.id = -1,
 	},
+	MFD_CELL_NAME("db8500-cpuidle"),
 };
 
 static const struct mfd_cell db8500_prcmu_devs[] = {
 	MFD_CELL_OF("db8500-prcmu-regulators", NULL,
 		    &db8500_regulators, sizeof(db8500_regulators), 0,
 		    "stericsson,db8500-prcmu-regulator"),
-	MFD_CELL_OF("cpuidle-dbx500",
-		    NULL, NULL, 0, 0, "stericsson,cpuidle-dbx500"),
 	MFD_CELL_OF("db8500-thermal",
 		    NULL, NULL, 0, 0, "stericsson,db8500-thermal"),
 };
diff --git a/drivers/mfd/intel-lpss-acpi.c b/drivers/mfd/intel-lpss-acpi.c
index 1f396039d58f..3f1d976eb67c 100644
--- a/drivers/mfd/intel-lpss-acpi.c
+++ b/drivers/mfd/intel-lpss-acpi.c
@@ -89,6 +89,11 @@ static const struct intel_lpss_platform_info apl_i2c_info = {
 	.swnode = &apl_i2c_node,
 };
 
+static const struct intel_lpss_platform_info cnl_i2c_info = {
+	.clk_rate = 216000000,
+	.swnode = &spt_i2c_node,
+};
+
 static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	/* SPT */
 	{ "INT3440", (kernel_ulong_t)&spt_info },
@@ -102,6 +107,19 @@ static const struct acpi_device_id intel_lpss_acpi_ids[] = {
 	{ "INT3448", (kernel_ulong_t)&spt_uart_info },
 	{ "INT3449", (kernel_ulong_t)&spt_uart_info },
 	{ "INT344A", (kernel_ulong_t)&spt_uart_info },
+	/* CNL */
+	{ "INT34B0", (kernel_ulong_t)&spt_info },
+	{ "INT34B1", (kernel_ulong_t)&spt_info },
+	{ "INT34B2", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B3", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B4", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B5", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B6", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B7", (kernel_ulong_t)&cnl_i2c_info },
+	{ "INT34B8", (kernel_ulong_t)&spt_uart_info },
+	{ "INT34B9", (kernel_ulong_t)&spt_uart_info },
+	{ "INT34BA", (kernel_ulong_t)&spt_uart_info },
+	{ "INT34BC", (kernel_ulong_t)&spt_info },
 	/* BXT */
 	{ "80860AAC", (kernel_ulong_t)&bxt_i2c_info },
 	{ "80860ABC", (kernel_ulong_t)&bxt_info },
diff --git a/drivers/mfd/intel-m10-bmc.c b/drivers/mfd/intel-m10-bmc.c
index 1a9bfb7f48cd..8db3bcf5fccc 100644
--- a/drivers/mfd/intel-m10-bmc.c
+++ b/drivers/mfd/intel-m10-bmc.c
@@ -15,7 +15,8 @@
 
 enum m10bmc_type {
 	M10_N3000,
-	M10_D5005
+	M10_D5005,
+	M10_N5010,
 };
 
 static struct mfd_cell m10bmc_d5005_subdevs[] = {
@@ -28,6 +29,10 @@ static struct mfd_cell m10bmc_pacn3000_subdevs[] = {
 	{ .name = "n3000bmc-secure" },
 };
 
+static struct mfd_cell m10bmc_n5010_subdevs[] = {
+	{ .name = "n5010bmc-hwmon" },
+};
+
 static const struct regmap_range m10bmc_regmap_range[] = {
 	regmap_reg_range(M10BMC_LEGACY_BUILD_VER, M10BMC_LEGACY_BUILD_VER),
 	regmap_reg_range(M10BMC_SYS_BASE, M10BMC_SYS_END),
@@ -192,6 +197,10 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
 		cells = m10bmc_d5005_subdevs;
 		n_cell = ARRAY_SIZE(m10bmc_d5005_subdevs);
 		break;
+	case M10_N5010:
+		cells = m10bmc_n5010_subdevs;
+		n_cell = ARRAY_SIZE(m10bmc_n5010_subdevs);
+		break;
 	default:
 		return -ENODEV;
 	}
@@ -207,6 +216,7 @@ static int intel_m10_bmc_spi_probe(struct spi_device *spi)
 static const struct spi_device_id m10bmc_spi_id[] = {
 	{ "m10-n3000", M10_N3000 },
 	{ "m10-d5005", M10_D5005 },
+	{ "m10-n5010", M10_N5010 },
 	{ }
 };
 MODULE_DEVICE_TABLE(spi, m10bmc_spi_id);
diff --git a/drivers/mfd/intel_quark_i2c_gpio.c b/drivers/mfd/intel_quark_i2c_gpio.c
index 01935ae4e9e1..9b9c76bd067b 100644
--- a/drivers/mfd/intel_quark_i2c_gpio.c
+++ b/drivers/mfd/intel_quark_i2c_gpio.c
@@ -17,7 +17,6 @@
 #include <linux/clk-provider.h>
 #include <linux/dmi.h>
 #include <linux/i2c.h>
-#include <linux/platform_data/gpio-dwapb.h>
 #include <linux/property.h>
 
 /* PCI BAR for register base address */
@@ -28,15 +27,6 @@
 #define MFD_ACPI_MATCH_GPIO	0ULL
 #define MFD_ACPI_MATCH_I2C	1ULL
 
-/* The base GPIO number under GPIOLIB framework */
-#define INTEL_QUARK_MFD_GPIO_BASE	8
-
-/* The default number of South-Cluster GPIO on Quark. */
-#define INTEL_QUARK_MFD_NGPIO		8
-
-/* The DesignWare GPIO ports on Quark. */
-#define INTEL_QUARK_GPIO_NPORTS	1
-
 #define INTEL_QUARK_IORES_MEM	0
 #define INTEL_QUARK_IORES_IRQ	1
 
@@ -111,12 +101,38 @@ static struct resource intel_quark_gpio_res[] = {
 	[INTEL_QUARK_IORES_MEM] = {
 		.flags = IORESOURCE_MEM,
 	},
+	[INTEL_QUARK_IORES_IRQ] = {
+		.flags = IORESOURCE_IRQ,
+	},
 };
 
 static struct mfd_cell_acpi_match intel_quark_acpi_match_gpio = {
 	.adr = MFD_ACPI_MATCH_GPIO,
 };
 
+static const struct software_node intel_quark_gpio_controller_node = {
+	.name = "intel-quark-gpio-controller",
+};
+
+static const struct property_entry intel_quark_gpio_portA_properties[] = {
+	PROPERTY_ENTRY_U32("reg", 0),
+	PROPERTY_ENTRY_U32("snps,nr-gpios", 8),
+	PROPERTY_ENTRY_U32("gpio-base", 8),
+	{ }
+};
+
+static const struct software_node intel_quark_gpio_portA_node = {
+	.name = "portA",
+	.parent = &intel_quark_gpio_controller_node,
+	.properties = intel_quark_gpio_portA_properties,
+};
+
+static const struct software_node *intel_quark_gpio_node_group[] = {
+	&intel_quark_gpio_controller_node,
+	&intel_quark_gpio_portA_node,
+	NULL
+};
+
 static struct mfd_cell intel_quark_mfd_cells[] = {
 	[MFD_I2C_BAR] = {
 		.id = MFD_I2C_BAR,
@@ -203,35 +219,19 @@ static int intel_quark_gpio_setup(struct pci_dev *pdev)
 {
 	struct mfd_cell *cell = &intel_quark_mfd_cells[MFD_GPIO_BAR];
 	struct resource *res = intel_quark_gpio_res;
-	struct dwapb_platform_data *pdata;
-	struct device *dev = &pdev->dev;
+	int ret;
 
 	res[INTEL_QUARK_IORES_MEM].start = pci_resource_start(pdev, MFD_GPIO_BAR);
 	res[INTEL_QUARK_IORES_MEM].end = pci_resource_end(pdev, MFD_GPIO_BAR);
 
-	pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL);
-	if (!pdata)
-		return -ENOMEM;
-
-	/* For intel quark x1000, it has only one port: portA */
-	pdata->nports = INTEL_QUARK_GPIO_NPORTS;
-	pdata->properties = devm_kcalloc(dev, pdata->nports,
-					 sizeof(*pdata->properties),
-					 GFP_KERNEL);
-	if (!pdata->properties)
-		return -ENOMEM;
-
-	/* Set the properties for portA */
-	pdata->properties->fwnode	= NULL;
-	pdata->properties->idx		= 0;
-	pdata->properties->ngpio	= INTEL_QUARK_MFD_NGPIO;
-	pdata->properties->gpio_base	= INTEL_QUARK_MFD_GPIO_BASE;
-	pdata->properties->irq[0]	= pci_irq_vector(pdev, 0);
-	pdata->properties->irq_shared	= true;
+	res[INTEL_QUARK_IORES_IRQ].start = pci_irq_vector(pdev, 0);
+	res[INTEL_QUARK_IORES_IRQ].end = pci_irq_vector(pdev, 0);
 
-	cell->platform_data = pdata;
-	cell->pdata_size = sizeof(*pdata);
+	ret = software_node_register_node_group(intel_quark_gpio_node_group);
+	if (ret)
+		return ret;
 
+	cell->swnode = &intel_quark_gpio_controller_node;
 	return 0;
 }
 
@@ -274,10 +274,12 @@ static int intel_quark_mfd_probe(struct pci_dev *pdev,
 			      ARRAY_SIZE(intel_quark_mfd_cells), NULL, 0,
 			      NULL);
 	if (ret)
-		goto err_free_irq_vectors;
+		goto err_unregister_gpio_node_group;
 
 	return 0;
 
+err_unregister_gpio_node_group:
+	software_node_unregister_node_group(intel_quark_gpio_node_group);
 err_free_irq_vectors:
 	pci_free_irq_vectors(pdev);
 err_unregister_i2c_clk:
@@ -288,6 +290,7 @@ err_unregister_i2c_clk:
 static void intel_quark_mfd_remove(struct pci_dev *pdev)
 {
 	mfd_remove_devices(&pdev->dev);
+	software_node_unregister_node_group(intel_quark_gpio_node_group);
 	pci_free_irq_vectors(pdev);
 	intel_quark_unregister_i2c_clk(&pdev->dev);
 }
diff --git a/drivers/mfd/lpc_ich.c b/drivers/mfd/lpc_ich.c
index 3bbb29a7e7a5..f10e53187f67 100644
--- a/drivers/mfd/lpc_ich.c
+++ b/drivers/mfd/lpc_ich.c
@@ -489,6 +489,7 @@ static struct lpc_ich_info lpc_chipset_info[] = {
 	[LPC_DH89XXCC] = {
 		.name = "DH89xxCC",
 		.iTCO_version = 2,
+		.gpio_version = ICH_V5_GPIO,
 	},
 	[LPC_PPT] = {
 		.name = "Panther Point",
diff --git a/drivers/mfd/lpc_sch.c b/drivers/mfd/lpc_sch.c
index 428a526cbe86..9ab9adce06fd 100644
--- a/drivers/mfd/lpc_sch.c
+++ b/drivers/mfd/lpc_sch.c
@@ -22,7 +22,7 @@
 #define SMBASE		0x40
 #define SMBUS_IO_SIZE	64
 
-#define GPIOBASE	0x44
+#define GPIO_BASE	0x44
 #define GPIO_IO_SIZE	64
 #define GPIO_IO_SIZE_CENTERTON	128
 
@@ -145,7 +145,7 @@ static int lpc_sch_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	if (ret == 0)
 		cells++;
 
-	ret = lpc_sch_populate_cell(dev, GPIOBASE, "sch_gpio",
+	ret = lpc_sch_populate_cell(dev, GPIO_BASE, "sch_gpio",
 				    info->io_size_gpio,
 				    id->device, &lpc_sch_cells[cells]);
 	if (ret < 0)
diff --git a/drivers/mfd/mt6360-core.c b/drivers/mfd/mt6360-core.c
index e628953548ce..6eaa6775b888 100644
--- a/drivers/mfd/mt6360-core.c
+++ b/drivers/mfd/mt6360-core.c
@@ -319,18 +319,18 @@ static const struct resource mt6360_regulator_resources[] = {
 	DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OC_EVT, "buck2_oc_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_OV_EVT, "buck2_ov_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_BUCK2_UV_EVT, "buck2_uv_evt"),
-	DEFINE_RES_IRQ_NAMED(MT6360_LDO6_OC_EVT, "ldo6_oc_evt"),
-	DEFINE_RES_IRQ_NAMED(MT6360_LDO7_OC_EVT, "ldo7_oc_evt"),
-	DEFINE_RES_IRQ_NAMED(MT6360_LDO6_PGB_EVT, "ldo6_pgb_evt"),
-	DEFINE_RES_IRQ_NAMED(MT6360_LDO7_PGB_EVT, "ldo7_pgb_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO1_OC_EVT, "ldo1_oc_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO2_OC_EVT, "ldo2_oc_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO3_OC_EVT, "ldo3_oc_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO5_OC_EVT, "ldo5_oc_evt"),
+	DEFINE_RES_IRQ_NAMED(MT6360_LDO6_OC_EVT, "ldo6_oc_evt"),
+	DEFINE_RES_IRQ_NAMED(MT6360_LDO7_OC_EVT, "ldo7_oc_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO1_PGB_EVT, "ldo1_pgb_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO2_PGB_EVT, "ldo2_pgb_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO3_PGB_EVT, "ldo3_pgb_evt"),
 	DEFINE_RES_IRQ_NAMED(MT6360_LDO5_PGB_EVT, "ldo5_pgb_evt"),
+	DEFINE_RES_IRQ_NAMED(MT6360_LDO6_PGB_EVT, "ldo6_pgb_evt"),
+	DEFINE_RES_IRQ_NAMED(MT6360_LDO7_PGB_EVT, "ldo7_pgb_evt"),
 };
 
 static const struct mfd_cell mt6360_devs[] = {
diff --git a/drivers/mfd/rsmu.h b/drivers/mfd/rsmu.h
new file mode 100644
index 000000000000..bb88597d189f
--- /dev/null
+++ b/drivers/mfd/rsmu.h
@@ -0,0 +1,16 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __RSMU_MFD_H
+#define __RSMU_MFD_H
+
+#include <linux/mfd/rsmu.h>
+
+int rsmu_core_init(struct rsmu_ddata *rsmu);
+void rsmu_core_exit(struct rsmu_ddata *rsmu);
+
+#endif /* __RSMU_MFD_H */
diff --git a/drivers/mfd/rsmu_core.c b/drivers/mfd/rsmu_core.c
new file mode 100644
index 000000000000..29437fd0bd5b
--- /dev/null
+++ b/drivers/mfd/rsmu_core.c
@@ -0,0 +1,88 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Core driver for Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rsmu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "rsmu.h"
+
+enum {
+	RSMU_PHC = 0,
+	RSMU_CDEV = 1,
+	RSMU_N_DEVS = 2,
+};
+
+static struct mfd_cell rsmu_cm_devs[] = {
+	[RSMU_PHC] = {
+		.name = "8a3400x-phc",
+	},
+	[RSMU_CDEV] = {
+		.name = "8a3400x-cdev",
+	},
+};
+
+static struct mfd_cell rsmu_sabre_devs[] = {
+	[RSMU_PHC] = {
+		.name = "82p33x1x-phc",
+	},
+	[RSMU_CDEV] = {
+		.name = "82p33x1x-cdev",
+	},
+};
+
+static struct mfd_cell rsmu_sl_devs[] = {
+	[RSMU_PHC] = {
+		.name = "8v19n85x-phc",
+	},
+	[RSMU_CDEV] = {
+		.name = "8v19n85x-cdev",
+	},
+};
+
+int rsmu_core_init(struct rsmu_ddata *rsmu)
+{
+	struct mfd_cell *cells;
+	int ret;
+
+	switch (rsmu->type) {
+	case RSMU_CM:
+		cells = rsmu_cm_devs;
+		break;
+	case RSMU_SABRE:
+		cells = rsmu_sabre_devs;
+		break;
+	case RSMU_SL:
+		cells = rsmu_sl_devs;
+		break;
+	default:
+		dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
+		return -ENODEV;
+	}
+
+	mutex_init(&rsmu->lock);
+
+	ret = devm_mfd_add_devices(rsmu->dev, PLATFORM_DEVID_AUTO, cells,
+				   RSMU_N_DEVS, NULL, 0, NULL);
+	if (ret < 0)
+		dev_err(rsmu->dev, "Failed to register sub-devices: %d\n", ret);
+
+	return ret;
+}
+
+void rsmu_core_exit(struct rsmu_ddata *rsmu)
+{
+	mutex_destroy(&rsmu->lock);
+}
+
+MODULE_DESCRIPTION("Renesas SMU core driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/rsmu_i2c.c b/drivers/mfd/rsmu_i2c.c
new file mode 100644
index 000000000000..dc001c9791c1
--- /dev/null
+++ b/drivers/mfd/rsmu_i2c.c
@@ -0,0 +1,203 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * I2C driver for Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rsmu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include "rsmu.h"
+
+/*
+ * 16-bit register address: the lower 8 bits of the register address come
+ * from the offset addr byte and the upper 8 bits come from the page register.
+ */
+#define	RSMU_CM_PAGE_ADDR		0xFD
+#define	RSMU_CM_PAGE_WINDOW		256
+
+/*
+ * 15-bit register address: the lower 7 bits of the register address come
+ * from the offset addr byte and the upper 8 bits come from the page register.
+ */
+#define	RSMU_SABRE_PAGE_ADDR		0x7F
+#define	RSMU_SABRE_PAGE_WINDOW		128
+
+static const struct regmap_range_cfg rsmu_cm_range_cfg[] = {
+	{
+		.range_min = 0,
+		.range_max = 0xD000,
+		.selector_reg = RSMU_CM_PAGE_ADDR,
+		.selector_mask = 0xFF,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = RSMU_CM_PAGE_WINDOW,
+	}
+};
+
+static const struct regmap_range_cfg rsmu_sabre_range_cfg[] = {
+	{
+		.range_min = 0,
+		.range_max = 0x400,
+		.selector_reg = RSMU_SABRE_PAGE_ADDR,
+		.selector_mask = 0xFF,
+		.selector_shift = 0,
+		.window_start = 0,
+		.window_len = RSMU_SABRE_PAGE_WINDOW,
+	}
+};
+
+static bool rsmu_cm_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RSMU_CM_PAGE_ADDR:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static bool rsmu_sabre_volatile_reg(struct device *dev, unsigned int reg)
+{
+	switch (reg) {
+	case RSMU_SABRE_PAGE_ADDR:
+		return false;
+	default:
+		return true;
+	}
+}
+
+static const struct regmap_config rsmu_cm_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0xD000,
+	.ranges = rsmu_cm_range_cfg,
+	.num_ranges = ARRAY_SIZE(rsmu_cm_range_cfg),
+	.volatile_reg = rsmu_cm_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+	.can_multi_write = true,
+};
+
+static const struct regmap_config rsmu_sabre_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.max_register = 0x400,
+	.ranges = rsmu_sabre_range_cfg,
+	.num_ranges = ARRAY_SIZE(rsmu_sabre_range_cfg),
+	.volatile_reg = rsmu_sabre_volatile_reg,
+	.cache_type = REGCACHE_RBTREE,
+	.can_multi_write = true,
+};
+
+static const struct regmap_config rsmu_sl_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.reg_format_endian = REGMAP_ENDIAN_BIG,
+	.max_register = 0x339,
+	.cache_type = REGCACHE_NONE,
+	.can_multi_write = true,
+};
+
+static int rsmu_i2c_probe(struct i2c_client *client,
+			  const struct i2c_device_id *id)
+{
+	const struct regmap_config *cfg;
+	struct rsmu_ddata *rsmu;
+	int ret;
+
+	rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL);
+	if (!rsmu)
+		return -ENOMEM;
+
+	i2c_set_clientdata(client, rsmu);
+
+	rsmu->dev = &client->dev;
+	rsmu->type = (enum rsmu_type)id->driver_data;
+
+	switch (rsmu->type) {
+	case RSMU_CM:
+		cfg = &rsmu_cm_regmap_config;
+		break;
+	case RSMU_SABRE:
+		cfg = &rsmu_sabre_regmap_config;
+		break;
+	case RSMU_SL:
+		cfg = &rsmu_sl_regmap_config;
+		break;
+	default:
+		dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
+		return -ENODEV;
+	}
+	rsmu->regmap = devm_regmap_init_i2c(client, cfg);
+	if (IS_ERR(rsmu->regmap)) {
+		ret = PTR_ERR(rsmu->regmap);
+		dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	return rsmu_core_init(rsmu);
+}
+
+static int rsmu_i2c_remove(struct i2c_client *client)
+{
+	struct rsmu_ddata *rsmu = i2c_get_clientdata(client);
+
+	rsmu_core_exit(rsmu);
+
+	return 0;
+}
+
+static const struct i2c_device_id rsmu_i2c_id[] = {
+	{ "8a34000",  RSMU_CM },
+	{ "8a34001",  RSMU_CM },
+	{ "82p33810", RSMU_SABRE },
+	{ "82p33811", RSMU_SABRE },
+	{ "8v19n850", RSMU_SL },
+	{ "8v19n851", RSMU_SL },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, rsmu_i2c_id);
+
+static const struct of_device_id rsmu_i2c_of_match[] = {
+	{ .compatible = "idt,8a34000",  .data = (void *)RSMU_CM },
+	{ .compatible = "idt,8a34001",  .data = (void *)RSMU_CM },
+	{ .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE },
+	{ .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE },
+	{ .compatible = "idt,8v19n850", .data = (void *)RSMU_SL },
+	{ .compatible = "idt,8v19n851", .data = (void *)RSMU_SL },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rsmu_i2c_of_match);
+
+static struct i2c_driver rsmu_i2c_driver = {
+	.driver = {
+		.name = "rsmu-i2c",
+		.of_match_table = of_match_ptr(rsmu_i2c_of_match),
+	},
+	.probe = rsmu_i2c_probe,
+	.remove	= rsmu_i2c_remove,
+	.id_table = rsmu_i2c_id,
+};
+
+static int __init rsmu_i2c_init(void)
+{
+	return i2c_add_driver(&rsmu_i2c_driver);
+}
+subsys_initcall(rsmu_i2c_init);
+
+static void __exit rsmu_i2c_exit(void)
+{
+	i2c_del_driver(&rsmu_i2c_driver);
+}
+module_exit(rsmu_i2c_exit);
+
+MODULE_DESCRIPTION("Renesas SMU I2C driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/rsmu_spi.c b/drivers/mfd/rsmu_spi.c
new file mode 100644
index 000000000000..fec2b4ec477c
--- /dev/null
+++ b/drivers/mfd/rsmu_spi.c
@@ -0,0 +1,273 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * SPI driver for Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/rsmu.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/spi/spi.h>
+
+#include "rsmu.h"
+
+#define	RSMU_CM_PAGE_ADDR		0x7C
+#define	RSMU_SABRE_PAGE_ADDR		0x7F
+#define	RSMU_HIGHER_ADDR_MASK		0xFF80
+#define	RSMU_HIGHER_ADDR_SHIFT		7
+#define	RSMU_LOWER_ADDR_MASK		0x7F
+
+static int rsmu_read_device(struct rsmu_ddata *rsmu, u8 reg, u8 *buf, u16 bytes)
+{
+	struct spi_device *client = to_spi_device(rsmu->dev);
+	struct spi_transfer xfer = {0};
+	struct spi_message msg;
+	u8 cmd[256] = {0};
+	u8 rsp[256] = {0};
+	int ret;
+
+	cmd[0] = reg | 0x80;
+	xfer.rx_buf = rsp;
+	xfer.len = bytes + 1;
+	xfer.tx_buf = cmd;
+	xfer.bits_per_word = client->bits_per_word;
+	xfer.speed_hz = client->max_speed_hz;
+
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	/*
+	 * 4-wire SPI is a shift register, so for every byte you send,
+	 * you get one back at the same time. Example read from 0xC024,
+	 * which has value of 0x2D
+	 *
+	 * MOSI:
+	 *       7C 00 C0 #Set page register
+	 *       A4 00    #MSB is set, so this is read command
+	 * MISO:
+	 *       XX 2D    #XX is a dummy byte from sending A4 and we
+	 *                 need to throw it away
+	 */
+	ret = spi_sync(client, &msg);
+	if (ret >= 0)
+		memcpy(buf, &rsp[1], xfer.len-1);
+
+	return ret;
+}
+
+static int rsmu_write_device(struct rsmu_ddata *rsmu, u8 reg, u8 *buf, u16 bytes)
+{
+	struct spi_device *client = to_spi_device(rsmu->dev);
+	struct spi_transfer xfer = {0};
+	struct spi_message msg;
+	u8 cmd[256] = {0};
+
+	cmd[0] = reg;
+	memcpy(&cmd[1], buf, bytes);
+
+	xfer.len = bytes + 1;
+	xfer.tx_buf = cmd;
+	xfer.bits_per_word = client->bits_per_word;
+	xfer.speed_hz = client->max_speed_hz;
+	spi_message_init(&msg);
+	spi_message_add_tail(&xfer, &msg);
+
+	return  spi_sync(client, &msg);
+}
+
+/*
+ * 1-byte (1B) offset addressing:
+ * 16-bit register address: the lower 7 bits of the register address come
+ * from the offset addr byte and the upper 9 bits come from the page register.
+ */
+static int rsmu_write_page_register(struct rsmu_ddata *rsmu, u16 reg)
+{
+	u8 page_reg;
+	u8 buf[2];
+	u16 bytes;
+	u16 page;
+	int err;
+
+	switch (rsmu->type) {
+	case RSMU_CM:
+		page_reg = RSMU_CM_PAGE_ADDR;
+		page = reg & RSMU_HIGHER_ADDR_MASK;
+		buf[0] = (u8)(page & 0xff);
+		buf[1] = (u8)((page >> 8) & 0xff);
+		bytes = 2;
+		break;
+	case RSMU_SABRE:
+		page_reg = RSMU_SABRE_PAGE_ADDR;
+		page = reg >> RSMU_HIGHER_ADDR_SHIFT;
+		buf[0] = (u8)(page & 0xff);
+		bytes = 1;
+		break;
+	default:
+		dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
+		return -ENODEV;
+	}
+
+	/* Simply return if we are on the same page */
+	if (rsmu->page == page)
+		return 0;
+
+	err = rsmu_write_device(rsmu, page_reg, buf, bytes);
+	if (err)
+		dev_err(rsmu->dev, "Failed to set page offset 0x%x\n", page);
+	else
+		/* Remember the last page */
+		rsmu->page = page;
+
+	return err;
+}
+
+static int rsmu_reg_read(void *context, unsigned int reg, unsigned int *val)
+{
+	struct rsmu_ddata *rsmu = spi_get_drvdata((struct spi_device *)context);
+	u8 addr = (u8)(reg & RSMU_LOWER_ADDR_MASK);
+	int err;
+
+	err = rsmu_write_page_register(rsmu, reg);
+	if (err)
+		return err;
+
+	err = rsmu_read_device(rsmu, addr, (u8 *)val, 1);
+	if (err)
+		dev_err(rsmu->dev, "Failed to read offset address 0x%x\n", addr);
+
+	return err;
+}
+
+static int rsmu_reg_write(void *context, unsigned int reg, unsigned int val)
+{
+	struct rsmu_ddata *rsmu = spi_get_drvdata((struct spi_device *)context);
+	u8 addr = (u8)(reg & RSMU_LOWER_ADDR_MASK);
+	u8 data = (u8)val;
+	int err;
+
+	err = rsmu_write_page_register(rsmu, reg);
+	if (err)
+		return err;
+
+	err = rsmu_write_device(rsmu, addr, &data, 1);
+	if (err)
+		dev_err(rsmu->dev,
+			"Failed to write offset address 0x%x\n", addr);
+
+	return err;
+}
+
+static const struct regmap_config rsmu_cm_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = 0xD000,
+	.reg_read = rsmu_reg_read,
+	.reg_write = rsmu_reg_write,
+	.cache_type = REGCACHE_NONE,
+};
+
+static const struct regmap_config rsmu_sabre_regmap_config = {
+	.reg_bits = 16,
+	.val_bits = 8,
+	.max_register = 0x400,
+	.reg_read = rsmu_reg_read,
+	.reg_write = rsmu_reg_write,
+	.cache_type = REGCACHE_NONE,
+};
+
+static int rsmu_spi_probe(struct spi_device *client)
+{
+	const struct spi_device_id *id = spi_get_device_id(client);
+	const struct regmap_config *cfg;
+	struct rsmu_ddata *rsmu;
+	int ret;
+
+	rsmu = devm_kzalloc(&client->dev, sizeof(*rsmu), GFP_KERNEL);
+	if (!rsmu)
+		return -ENOMEM;
+
+	spi_set_drvdata(client, rsmu);
+
+	rsmu->dev = &client->dev;
+	rsmu->type = (enum rsmu_type)id->driver_data;
+
+	/* Initialize regmap */
+	switch (rsmu->type) {
+	case RSMU_CM:
+		cfg = &rsmu_cm_regmap_config;
+		break;
+	case RSMU_SABRE:
+		cfg = &rsmu_sabre_regmap_config;
+		break;
+	default:
+		dev_err(rsmu->dev, "Unsupported RSMU device type: %d\n", rsmu->type);
+		return -ENODEV;
+	}
+
+	rsmu->regmap = devm_regmap_init(&client->dev, NULL, client, cfg);
+	if (IS_ERR(rsmu->regmap)) {
+		ret = PTR_ERR(rsmu->regmap);
+		dev_err(rsmu->dev, "Failed to allocate register map: %d\n", ret);
+		return ret;
+	}
+
+	return rsmu_core_init(rsmu);
+}
+
+static int rsmu_spi_remove(struct spi_device *client)
+{
+	struct rsmu_ddata *rsmu = spi_get_drvdata(client);
+
+	rsmu_core_exit(rsmu);
+
+	return 0;
+}
+
+static const struct spi_device_id rsmu_spi_id[] = {
+	{ "8a34000",  RSMU_CM },
+	{ "8a34001",  RSMU_CM },
+	{ "82p33810", RSMU_SABRE },
+	{ "82p33811", RSMU_SABRE },
+	{}
+};
+MODULE_DEVICE_TABLE(spi, rsmu_spi_id);
+
+static const struct of_device_id rsmu_spi_of_match[] = {
+	{ .compatible = "idt,8a34000",  .data = (void *)RSMU_CM },
+	{ .compatible = "idt,8a34001",  .data = (void *)RSMU_CM },
+	{ .compatible = "idt,82p33810", .data = (void *)RSMU_SABRE },
+	{ .compatible = "idt,82p33811", .data = (void *)RSMU_SABRE },
+	{}
+};
+MODULE_DEVICE_TABLE(of, rsmu_spi_of_match);
+
+static struct spi_driver rsmu_spi_driver = {
+	.driver = {
+		.name = "rsmu-spi",
+		.of_match_table = of_match_ptr(rsmu_spi_of_match),
+	},
+	.probe = rsmu_spi_probe,
+	.remove	= rsmu_spi_remove,
+	.id_table = rsmu_spi_id,
+};
+
+static int __init rsmu_spi_init(void)
+{
+	return spi_register_driver(&rsmu_spi_driver);
+}
+subsys_initcall(rsmu_spi_init);
+
+static void __exit rsmu_spi_exit(void)
+{
+	spi_unregister_driver(&rsmu_spi_driver);
+}
+module_exit(rsmu_spi_exit);
+
+MODULE_DESCRIPTION("Renesas SMU SPI driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/simple-mfd-i2c.c b/drivers/mfd/simple-mfd-i2c.c
index 87f684cff9a1..51536691ad9d 100644
--- a/drivers/mfd/simple-mfd-i2c.c
+++ b/drivers/mfd/simple-mfd-i2c.c
@@ -2,39 +2,64 @@
 /*
  * Simple MFD - I2C
  *
+ * Author(s):
+ * 	Michael Walle <michael@walle.cc>
+ * 	Lee Jones <lee.jones@linaro.org>
+ *
  * This driver creates a single register map with the intention for it to be
  * shared by all sub-devices.  Children can use their parent's device structure
  * (dev.parent) in order to reference it.
  *
  * Once the register map has been successfully initialised, any sub-devices
- * represented by child nodes in Device Tree will be subsequently registered.
+ * represented by child nodes in Device Tree or via the MFD cells in this file
+ * will be subsequently registered.
  */
 
 #include <linux/i2c.h>
 #include <linux/kernel.h>
+#include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/of_platform.h>
 #include <linux/regmap.h>
 
-static const struct regmap_config simple_regmap_config = {
+#include "simple-mfd-i2c.h"
+
+static const struct regmap_config regmap_config_8r_8v = {
 	.reg_bits = 8,
 	.val_bits = 8,
 };
 
 static int simple_mfd_i2c_probe(struct i2c_client *i2c)
 {
-	const struct regmap_config *config;
+	const struct simple_mfd_data *simple_mfd_data;
+	const struct regmap_config *regmap_config;
 	struct regmap *regmap;
+	int ret;
+
+	simple_mfd_data = device_get_match_data(&i2c->dev);
 
-	config = device_get_match_data(&i2c->dev);
-	if (!config)
-		config = &simple_regmap_config;
+	/* If no regmap_config is specified, use the default 8reg and 8val bits */
+	if (!simple_mfd_data || !simple_mfd_data->regmap_config)
+		regmap_config = &regmap_config_8r_8v;
+	else
+		regmap_config = simple_mfd_data->regmap_config;
 
-	regmap = devm_regmap_init_i2c(i2c, config);
+	regmap = devm_regmap_init_i2c(i2c, regmap_config);
 	if (IS_ERR(regmap))
 		return PTR_ERR(regmap);
 
-	return devm_of_platform_populate(&i2c->dev);
+	/* If no MFD cells are spedified, use register the DT child nodes instead */
+	if (!simple_mfd_data || !simple_mfd_data->mfd_cell)
+		return devm_of_platform_populate(&i2c->dev);
+
+	ret = devm_mfd_add_devices(&i2c->dev, PLATFORM_DEVID_AUTO,
+				   simple_mfd_data->mfd_cell,
+				   simple_mfd_data->mfd_cell_size,
+				   NULL, 0, NULL);
+	if (ret)
+		dev_err(&i2c->dev, "Failed to add child devices\n");
+
+	return ret;
 }
 
 static const struct of_device_id simple_mfd_i2c_of_match[] = {
diff --git a/drivers/mfd/simple-mfd-i2c.h b/drivers/mfd/simple-mfd-i2c.h
new file mode 100644
index 000000000000..7cb2bdd347d9
--- /dev/null
+++ b/drivers/mfd/simple-mfd-i2c.h
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Simple MFD - I2C
+ *
+ * Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This driver creates a single register map with the intention for it to be
+ * shared by all sub-devices.  Children can use their parent's device structure
+ * (dev.parent) in order to reference it.
+ *
+ * This driver creates a single register map with the intention for it to be
+ * shared by all sub-devices.  Children can use their parent's device structure
+ * (dev.parent) in order to reference it.
+ *
+ * Once the register map has been successfully initialised, any sub-devices
+ * represented by child nodes in Device Tree or via the MFD cells in the
+ * associated C file will be subsequently registered.
+ */
+
+#ifndef __MFD_SIMPLE_MFD_I2C_H
+#define __MFD_SIMPLE_MFD_I2C_H
+
+#include <linux/mfd/core.h>
+#include <linux/regmap.h>
+
+struct simple_mfd_data {
+	const struct regmap_config *regmap_config;
+	const struct mfd_cell *mfd_cell;
+	size_t mfd_cell_size;
+};
+
+#endif /* __MFD_SIMPLE_MFD_I2C_H */
diff --git a/drivers/mfd/stmpe.c b/drivers/mfd/stmpe.c
index 1dd39483e7c1..58d09c615e67 100644
--- a/drivers/mfd/stmpe.c
+++ b/drivers/mfd/stmpe.c
@@ -1095,7 +1095,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 
 	if (variant->id_val == STMPE801_ID ||
 	    variant->id_val == STMPE1600_ID) {
-		int base = irq_create_mapping(stmpe->domain, 0);
+		int base = irq_find_mapping(stmpe->domain, 0);
 
 		handle_nested_irq(base);
 		return IRQ_HANDLED;
@@ -1123,7 +1123,7 @@ static irqreturn_t stmpe_irq(int irq, void *data)
 		while (status) {
 			int bit = __ffs(status);
 			int line = bank * 8 + bit;
-			int nestedirq = irq_create_mapping(stmpe->domain, line);
+			int nestedirq = irq_find_mapping(stmpe->domain, line);
 
 			handle_nested_irq(nestedirq);
 			status &= ~(1 << bit);
diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c
index 765c0210cb52..191fdb87c424 100644
--- a/drivers/mfd/syscon.c
+++ b/drivers/mfd/syscon.c
@@ -60,7 +60,7 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk)
 		goto err_map;
 	}
 
-	base = ioremap(res.start, resource_size(&res));
+	base = of_iomap(np, 0);
 	if (!base) {
 		ret = -ENOMEM;
 		goto err_map;
diff --git a/drivers/mfd/tc3589x.c b/drivers/mfd/tc3589x.c
index 7614f8fe0e91..13583cdb93b6 100644
--- a/drivers/mfd/tc3589x.c
+++ b/drivers/mfd/tc3589x.c
@@ -187,7 +187,7 @@ again:
 
 	while (status) {
 		int bit = __ffs(status);
-		int virq = irq_create_mapping(tc3589x->domain, bit);
+		int virq = irq_find_mapping(tc3589x->domain, bit);
 
 		handle_nested_irq(virq);
 		status &= ~(1 << bit);
diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
index 0e6e25308190..55adc379f94b 100644
--- a/drivers/mfd/ti_am335x_tscadc.c
+++ b/drivers/mfd/ti_am335x_tscadc.c
@@ -175,10 +175,9 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
 	tscadc->dev = &pdev->dev;
 
 	err = platform_get_irq(pdev, 0);
-	if (err < 0) {
-		dev_err(&pdev->dev, "no irq ID is specified.\n");
+	if (err < 0)
 		goto ret;
-	} else
+	else
 		tscadc->irq = err;
 
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mfd/tps65086.c b/drivers/mfd/tps65086.c
index 341466ef20cc..3bd5728844a0 100644
--- a/drivers/mfd/tps65086.c
+++ b/drivers/mfd/tps65086.c
@@ -24,6 +24,7 @@
 static const struct mfd_cell tps65086_cells[] = {
 	{ .name = "tps65086-regulator", },
 	{ .name = "tps65086-gpio", },
+	{ .name = "tps65086-reset", },
 };
 
 static const struct regmap_range tps65086_yes_ranges[] = {
@@ -100,29 +101,30 @@ static int tps65086_probe(struct i2c_client *client,
 		 (char)((version & TPS65086_DEVICEID_OTP_MASK) >> 4) + 'A',
 		 (version & TPS65086_DEVICEID_REV_MASK) >> 6);
 
-	ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
-				  &tps65086_irq_chip, &tps->irq_data);
-	if (ret) {
-		dev_err(tps->dev, "Failed to register IRQ chip\n");
-		return ret;
+	if (tps->irq > 0) {
+		ret = regmap_add_irq_chip(tps->regmap, tps->irq, IRQF_ONESHOT, 0,
+					  &tps65086_irq_chip, &tps->irq_data);
+		if (ret) {
+			dev_err(tps->dev, "Failed to register IRQ chip\n");
+			return ret;
+		}
 	}
 
 	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65086_cells,
 			      ARRAY_SIZE(tps65086_cells), NULL, 0,
 			      regmap_irq_get_domain(tps->irq_data));
-	if (ret) {
+	if (ret && tps->irq > 0)
 		regmap_del_irq_chip(tps->irq, tps->irq_data);
-		return ret;
-	}
 
-	return 0;
+	return ret;
 }
 
 static int tps65086_remove(struct i2c_client *client)
 {
 	struct tps65086 *tps = i2c_get_clientdata(client);
 
-	regmap_del_irq_chip(tps->irq, tps->irq_data);
+	if (tps->irq > 0)
+		regmap_del_irq_chip(tps->irq, tps->irq_data);
 
 	return 0;
 }
diff --git a/drivers/mfd/tqmx86.c b/drivers/mfd/tqmx86.c
index ddddf08b6a4c..7ae906ff8e35 100644
--- a/drivers/mfd/tqmx86.c
+++ b/drivers/mfd/tqmx86.c
@@ -35,7 +35,11 @@
 #define TQMX86_REG_BOARD_ID_E39x	7
 #define TQMX86_REG_BOARD_ID_70EB	8
 #define TQMX86_REG_BOARD_ID_80UC	9
-#define TQMX86_REG_BOARD_ID_90UC	10
+#define TQMX86_REG_BOARD_ID_110EB	11
+#define TQMX86_REG_BOARD_ID_E40M	12
+#define TQMX86_REG_BOARD_ID_E40S	13
+#define TQMX86_REG_BOARD_ID_E40C1	14
+#define TQMX86_REG_BOARD_ID_E40C2	15
 #define TQMX86_REG_BOARD_REV	0x21
 #define TQMX86_REG_IO_EXT_INT	0x26
 #define TQMX86_REG_IO_EXT_INT_NONE		0
@@ -77,7 +81,7 @@ static struct i2c_board_info tqmx86_i2c_devices[] = {
 	},
 };
 
-static struct ocores_i2c_platform_data ocores_platfom_data = {
+static struct ocores_i2c_platform_data ocores_platform_data = {
 	.num_devices = ARRAY_SIZE(tqmx86_i2c_devices),
 	.devices = tqmx86_i2c_devices,
 };
@@ -85,8 +89,8 @@ static struct ocores_i2c_platform_data ocores_platfom_data = {
 static const struct mfd_cell tqmx86_i2c_soft_dev[] = {
 	{
 		.name = "ocores-i2c",
-		.platform_data = &ocores_platfom_data,
-		.pdata_size = sizeof(ocores_platfom_data),
+		.platform_data = &ocores_platform_data,
+		.pdata_size = sizeof(ocores_platform_data),
 		.resources = tqmx_i2c_soft_resources,
 		.num_resources = ARRAY_SIZE(tqmx_i2c_soft_resources),
 	},
@@ -128,21 +132,33 @@ static const char *tqmx86_board_id_to_name(u8 board_id)
 		return "TQMx70EB";
 	case TQMX86_REG_BOARD_ID_80UC:
 		return "TQMx80UC";
-	case TQMX86_REG_BOARD_ID_90UC:
-		return "TQMx90UC";
+	case TQMX86_REG_BOARD_ID_110EB:
+		return "TQMx110EB";
+	case TQMX86_REG_BOARD_ID_E40M:
+		return "TQMxE40M";
+	case TQMX86_REG_BOARD_ID_E40S:
+		return "TQMxE40S";
+	case TQMX86_REG_BOARD_ID_E40C1:
+		return "TQMxE40C1";
+	case TQMX86_REG_BOARD_ID_E40C2:
+		return "TQMxE40C2";
 	default:
 		return "Unknown";
 	}
 }
 
-static int tqmx86_board_id_to_clk_rate(u8 board_id)
+static int tqmx86_board_id_to_clk_rate(struct device *dev, u8 board_id)
 {
 	switch (board_id) {
 	case TQMX86_REG_BOARD_ID_50UC:
 	case TQMX86_REG_BOARD_ID_60EB:
 	case TQMX86_REG_BOARD_ID_70EB:
 	case TQMX86_REG_BOARD_ID_80UC:
-	case TQMX86_REG_BOARD_ID_90UC:
+	case TQMX86_REG_BOARD_ID_110EB:
+	case TQMX86_REG_BOARD_ID_E40M:
+	case TQMX86_REG_BOARD_ID_E40S:
+	case TQMX86_REG_BOARD_ID_E40C1:
+	case TQMX86_REG_BOARD_ID_E40C2:
 		return 24000;
 	case TQMX86_REG_BOARD_ID_E39M:
 	case TQMX86_REG_BOARD_ID_E39C:
@@ -152,7 +168,9 @@ static int tqmx86_board_id_to_clk_rate(u8 board_id)
 	case TQMX86_REG_BOARD_ID_E38C:
 		return 33000;
 	default:
-		return 0;
+		dev_warn(dev, "unknown board %d, assuming 24MHz LPC clock\n",
+			 board_id);
+		return 24000;
 	}
 }
 
@@ -209,9 +227,11 @@ static int tqmx86_probe(struct platform_device *pdev)
 
 		/* Assumes the IRQ resource is first. */
 		tqmx_gpio_resources[0].start = gpio_irq;
+	} else {
+		tqmx_gpio_resources[0].flags = 0;
 	}
 
-	ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id);
+	ocores_platform_data.clock_khz = tqmx86_board_id_to_clk_rate(dev, board_id);
 
 	if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
 		err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
@@ -253,6 +273,14 @@ static const struct dmi_system_id tqmx86_dmi_table[] __initconst = {
 		},
 		.callback = tqmx86_create_platform_device,
 	},
+	{
+		.ident = "TQMX86",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TQ-Systems"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TQMx"),
+		},
+		.callback = tqmx86_create_platform_device,
+	},
 	{}
 };
 MODULE_DEVICE_TABLE(dmi, tqmx86_dmi_table);
diff --git a/drivers/mfd/wm8994-irq.c b/drivers/mfd/wm8994-irq.c
index 6c3a619e2628..651a028bc519 100644
--- a/drivers/mfd/wm8994-irq.c
+++ b/drivers/mfd/wm8994-irq.c
@@ -154,7 +154,7 @@ static irqreturn_t wm8994_edge_irq(int irq, void *data)
 	struct wm8994 *wm8994 = data;
 
 	while (gpio_get_value_cansleep(wm8994->pdata.irq_gpio))
-		handle_nested_irq(irq_create_mapping(wm8994->edge_irq, 0));
+		handle_nested_irq(irq_find_mapping(wm8994->edge_irq, 0));
 
 	return IRQ_HANDLED;
 }
diff --git a/drivers/misc/habanalabs/common/Makefile b/drivers/misc/habanalabs/common/Makefile
index 5d8b48288cf4..6ebe3c7001ff 100644
--- a/drivers/misc/habanalabs/common/Makefile
+++ b/drivers/misc/habanalabs/common/Makefile
@@ -10,4 +10,5 @@ HL_COMMON_FILES := common/habanalabs_drv.o common/device.o common/context.o \
 		common/asid.o common/habanalabs_ioctl.o \
 		common/command_buffer.o common/hw_queue.o common/irq.o \
 		common/sysfs.o common/hwmon.o common/memory.o \
-		common/command_submission.o common/firmware_if.o
+		common/command_submission.o common/firmware_if.o \
+		common/state_dump.o
diff --git a/drivers/misc/habanalabs/common/command_buffer.c b/drivers/misc/habanalabs/common/command_buffer.c
index 719168c980a4..8132a84698d5 100644
--- a/drivers/misc/habanalabs/common/command_buffer.c
+++ b/drivers/misc/habanalabs/common/command_buffer.c
@@ -314,8 +314,6 @@ int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
 
 	spin_lock(&mgr->cb_lock);
 	rc = idr_alloc(&mgr->cb_handles, cb, 1, 0, GFP_ATOMIC);
-	if (rc < 0)
-		rc = idr_alloc(&mgr->cb_handles, cb, 1, 0, GFP_KERNEL);
 	spin_unlock(&mgr->cb_lock);
 
 	if (rc < 0) {
@@ -552,7 +550,7 @@ int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma)
 
 	vma->vm_private_data = cb;
 
-	rc = hdev->asic_funcs->cb_mmap(hdev, vma, cb->kernel_address,
+	rc = hdev->asic_funcs->mmap(hdev, vma, cb->kernel_address,
 					cb->bus_address, cb->size);
 	if (rc) {
 		spin_lock(&cb->lock);
diff --git a/drivers/misc/habanalabs/common/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index 80c60fb41bbc..7b0516cf808b 100644
--- a/drivers/misc/habanalabs/common/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -38,7 +38,11 @@ static void hl_sob_reset(struct kref *ref)
 							kref);
 	struct hl_device *hdev = hw_sob->hdev;
 
+	dev_dbg(hdev->dev, "reset sob id %u\n", hw_sob->sob_id);
+
 	hdev->asic_funcs->reset_sob(hdev, hw_sob);
+
+	hw_sob->need_reset = false;
 }
 
 void hl_sob_reset_error(struct kref *ref)
@@ -52,6 +56,24 @@ void hl_sob_reset_error(struct kref *ref)
 		hw_sob->q_idx, hw_sob->sob_id);
 }
 
+void hw_sob_put(struct hl_hw_sob *hw_sob)
+{
+	if (hw_sob)
+		kref_put(&hw_sob->kref, hl_sob_reset);
+}
+
+static void hw_sob_put_err(struct hl_hw_sob *hw_sob)
+{
+	if (hw_sob)
+		kref_put(&hw_sob->kref, hl_sob_reset_error);
+}
+
+void hw_sob_get(struct hl_hw_sob *hw_sob)
+{
+	if (hw_sob)
+		kref_get(&hw_sob->kref);
+}
+
 /**
  * hl_gen_sob_mask() - Generates a sob mask to be used in a monitor arm packet
  * @sob_base: sob base id
@@ -84,76 +106,29 @@ int hl_gen_sob_mask(u16 sob_base, u8 sob_mask, u8 *mask)
 	return 0;
 }
 
-static void sob_reset_work(struct work_struct *work)
-{
-	struct hl_cs_compl *hl_cs_cmpl =
-		container_of(work, struct hl_cs_compl, sob_reset_work);
-	struct hl_device *hdev = hl_cs_cmpl->hdev;
-
-	/*
-	 * A signal CS can get completion while the corresponding wait
-	 * for signal CS is on its way to the PQ. The wait for signal CS
-	 * will get stuck if the signal CS incremented the SOB to its
-	 * max value and there are no pending (submitted) waits on this
-	 * SOB.
-	 * We do the following to void this situation:
-	 * 1. The wait for signal CS must get a ref for the signal CS as
-	 *    soon as possible in cs_ioctl_signal_wait() and put it
-	 *    before being submitted to the PQ but after it incremented
-	 *    the SOB refcnt in init_signal_wait_cs().
-	 * 2. Signal/Wait for signal CS will decrement the SOB refcnt
-	 *    here.
-	 * These two measures guarantee that the wait for signal CS will
-	 * reset the SOB upon completion rather than the signal CS and
-	 * hence the above scenario is avoided.
-	 */
-	kref_put(&hl_cs_cmpl->hw_sob->kref, hl_sob_reset);
-
-	if (hl_cs_cmpl->type == CS_TYPE_COLLECTIVE_WAIT)
-		hdev->asic_funcs->reset_sob_group(hdev,
-				hl_cs_cmpl->sob_group);
-
-	kfree(hl_cs_cmpl);
-}
-
 static void hl_fence_release(struct kref *kref)
 {
 	struct hl_fence *fence =
 		container_of(kref, struct hl_fence, refcount);
 	struct hl_cs_compl *hl_cs_cmpl =
 		container_of(fence, struct hl_cs_compl, base_fence);
-	struct hl_device *hdev = hl_cs_cmpl->hdev;
 
-	/* EBUSY means the CS was never submitted and hence we don't have
-	 * an attached hw_sob object that we should handle here
-	 */
-	if (fence->error == -EBUSY)
-		goto free;
-
-	if ((hl_cs_cmpl->type == CS_TYPE_SIGNAL) ||
-		(hl_cs_cmpl->type == CS_TYPE_WAIT) ||
-		(hl_cs_cmpl->type == CS_TYPE_COLLECTIVE_WAIT)) {
-
-		dev_dbg(hdev->dev,
-			"CS 0x%llx type %d finished, sob_id: %d, sob_val: 0x%x\n",
-			hl_cs_cmpl->cs_seq,
-			hl_cs_cmpl->type,
-			hl_cs_cmpl->hw_sob->sob_id,
-			hl_cs_cmpl->sob_val);
-
-		queue_work(hdev->sob_reset_wq, &hl_cs_cmpl->sob_reset_work);
-
-		return;
-	}
-
-free:
 	kfree(hl_cs_cmpl);
 }
 
 void hl_fence_put(struct hl_fence *fence)
 {
-	if (fence)
-		kref_put(&fence->refcount, hl_fence_release);
+	if (IS_ERR_OR_NULL(fence))
+		return;
+	kref_put(&fence->refcount, hl_fence_release);
+}
+
+void hl_fences_put(struct hl_fence **fence, int len)
+{
+	int i;
+
+	for (i = 0; i < len; i++, fence++)
+		hl_fence_put(*fence);
 }
 
 void hl_fence_get(struct hl_fence *fence)
@@ -473,11 +448,139 @@ static void cs_handle_tdr(struct hl_device *hdev, struct hl_cs *cs)
 	spin_unlock(&hdev->cs_mirror_lock);
 }
 
+/*
+ * force_complete_multi_cs - complete all contexts that wait on multi-CS
+ *
+ * @hdev: pointer to habanalabs device structure
+ */
+static void force_complete_multi_cs(struct hl_device *hdev)
+{
+	int i;
+
+	for (i = 0; i < MULTI_CS_MAX_USER_CTX; i++) {
+		struct multi_cs_completion *mcs_compl;
+
+		mcs_compl = &hdev->multi_cs_completion[i];
+
+		spin_lock(&mcs_compl->lock);
+
+		if (!mcs_compl->used) {
+			spin_unlock(&mcs_compl->lock);
+			continue;
+		}
+
+		/* when calling force complete no context should be waiting on
+		 * multi-cS.
+		 * We are calling the function as a protection for such case
+		 * to free any pending context and print error message
+		 */
+		dev_err(hdev->dev,
+				"multi-CS completion context %d still waiting when calling force completion\n",
+				i);
+		complete_all(&mcs_compl->completion);
+		spin_unlock(&mcs_compl->lock);
+	}
+}
+
+/*
+ * complete_multi_cs - complete all waiting entities on multi-CS
+ *
+ * @hdev: pointer to habanalabs device structure
+ * @cs: CS structure
+ * The function signals a waiting entity that has an overlapping stream masters
+ * with the completed CS.
+ * For example:
+ * - a completed CS worked on stream master QID 4, multi CS completion
+ *   is actively waiting on stream master QIDs 3, 5. don't send signal as no
+ *   common stream master QID
+ * - a completed CS worked on stream master QID 4, multi CS completion
+ *   is actively waiting on stream master QIDs 3, 4. send signal as stream
+ *   master QID 4 is common
+ */
+static void complete_multi_cs(struct hl_device *hdev, struct hl_cs *cs)
+{
+	struct hl_fence *fence = cs->fence;
+	int i;
+
+	/* in case of multi CS check for completion only for the first CS */
+	if (cs->staged_cs && !cs->staged_first)
+		return;
+
+	for (i = 0; i < MULTI_CS_MAX_USER_CTX; i++) {
+		struct multi_cs_completion *mcs_compl;
+
+		mcs_compl = &hdev->multi_cs_completion[i];
+		if (!mcs_compl->used)
+			continue;
+
+		spin_lock(&mcs_compl->lock);
+
+		/*
+		 * complete if:
+		 * 1. still waiting for completion
+		 * 2. the completed CS has at least one overlapping stream
+		 *    master with the stream masters in the completion
+		 */
+		if (mcs_compl->used &&
+				(fence->stream_master_qid_map &
+					mcs_compl->stream_master_qid_map)) {
+			/* extract the timestamp only of first completed CS */
+			if (!mcs_compl->timestamp)
+				mcs_compl->timestamp =
+						ktime_to_ns(fence->timestamp);
+			complete_all(&mcs_compl->completion);
+		}
+
+		spin_unlock(&mcs_compl->lock);
+	}
+}
+
+static inline void cs_release_sob_reset_handler(struct hl_device *hdev,
+					struct hl_cs *cs,
+					struct hl_cs_compl *hl_cs_cmpl)
+{
+	/* Skip this handler if the cs wasn't submitted, to avoid putting
+	 * the hw_sob twice, since this case already handled at this point,
+	 * also skip if the hw_sob pointer wasn't set.
+	 */
+	if (!hl_cs_cmpl->hw_sob || !cs->submitted)
+		return;
+
+	spin_lock(&hl_cs_cmpl->lock);
+
+	/*
+	 * we get refcount upon reservation of signals or signal/wait cs for the
+	 * hw_sob object, and need to put it when the first staged cs
+	 * (which cotains the encaps signals) or cs signal/wait is completed.
+	 */
+	if ((hl_cs_cmpl->type == CS_TYPE_SIGNAL) ||
+			(hl_cs_cmpl->type == CS_TYPE_WAIT) ||
+			(hl_cs_cmpl->type == CS_TYPE_COLLECTIVE_WAIT) ||
+			(!!hl_cs_cmpl->encaps_signals)) {
+		dev_dbg(hdev->dev,
+				"CS 0x%llx type %d finished, sob_id: %d, sob_val: %u\n",
+				hl_cs_cmpl->cs_seq,
+				hl_cs_cmpl->type,
+				hl_cs_cmpl->hw_sob->sob_id,
+				hl_cs_cmpl->sob_val);
+
+		hw_sob_put(hl_cs_cmpl->hw_sob);
+
+		if (hl_cs_cmpl->type == CS_TYPE_COLLECTIVE_WAIT)
+			hdev->asic_funcs->reset_sob_group(hdev,
+					hl_cs_cmpl->sob_group);
+	}
+
+	spin_unlock(&hl_cs_cmpl->lock);
+}
+
 static void cs_do_release(struct kref *ref)
 {
 	struct hl_cs *cs = container_of(ref, struct hl_cs, refcount);
 	struct hl_device *hdev = cs->ctx->hdev;
 	struct hl_cs_job *job, *tmp;
+	struct hl_cs_compl *hl_cs_cmpl =
+			container_of(cs->fence, struct hl_cs_compl, base_fence);
 
 	cs->completed = true;
 
@@ -493,8 +596,9 @@ static void cs_do_release(struct kref *ref)
 		complete_job(hdev, job);
 
 	if (!cs->submitted) {
-		/* In case the wait for signal CS was submitted, the put occurs
-		 * in init_signal_wait_cs() or collective_wait_init_cs()
+		/*
+		 * In case the wait for signal CS was submitted, the fence put
+		 * occurs in init_signal_wait_cs() or collective_wait_init_cs()
 		 * right before hanging on the PQ.
 		 */
 		if (cs->type == CS_TYPE_WAIT ||
@@ -535,8 +639,20 @@ static void cs_do_release(struct kref *ref)
 			list_del(&cs->staged_cs_node);
 			spin_unlock(&hdev->cs_mirror_lock);
 		}
+
+		/* decrement refcount to handle when first staged cs
+		 * with encaps signals is completed.
+		 */
+		if (hl_cs_cmpl->encaps_signals)
+			kref_put(&hl_cs_cmpl->encaps_sig_hdl->refcount,
+						hl_encaps_handle_do_release);
 	}
 
+	if ((cs->type == CS_TYPE_WAIT || cs->type == CS_TYPE_COLLECTIVE_WAIT)
+			&& cs->encaps_signals)
+		kref_put(&cs->encaps_sig_hdl->refcount,
+					hl_encaps_handle_do_release);
+
 out:
 	/* Must be called before hl_ctx_put because inside we use ctx to get
 	 * the device
@@ -566,6 +682,10 @@ out:
 	if (cs->timestamp)
 		cs->fence->timestamp = ktime_get();
 	complete_all(&cs->fence->completion);
+	complete_multi_cs(hdev, cs);
+
+	cs_release_sob_reset_handler(hdev, cs, hl_cs_cmpl);
+
 	hl_fence_put(cs->fence);
 
 	kfree(cs->jobs_in_queue_cnt);
@@ -621,6 +741,10 @@ static void cs_timedout(struct work_struct *work)
 		break;
 	}
 
+	rc = hl_state_dump(hdev);
+	if (rc)
+		dev_err(hdev->dev, "Error during system state dump %d\n", rc);
+
 	cs_put(cs);
 
 	if (likely(!skip_reset_on_timeout)) {
@@ -661,6 +785,7 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
 	cs->completed = false;
 	cs->type = cs_type;
 	cs->timestamp = !!(flags & HL_CS_FLAGS_TIMESTAMP);
+	cs->encaps_signals = !!(flags & HL_CS_FLAGS_ENCAP_SIGNALS);
 	cs->timeout_jiffies = timeout;
 	cs->skip_reset_on_timeout =
 		hdev->skip_reset_on_timeout ||
@@ -671,9 +796,9 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
 	kref_init(&cs->refcount);
 	spin_lock_init(&cs->job_lock);
 
-	cs_cmpl = kmalloc(sizeof(*cs_cmpl), GFP_ATOMIC);
+	cs_cmpl = kzalloc(sizeof(*cs_cmpl), GFP_ATOMIC);
 	if (!cs_cmpl)
-		cs_cmpl = kmalloc(sizeof(*cs_cmpl), GFP_KERNEL);
+		cs_cmpl = kzalloc(sizeof(*cs_cmpl), GFP_KERNEL);
 
 	if (!cs_cmpl) {
 		atomic64_inc(&ctx->cs_counters.out_of_mem_drop_cnt);
@@ -698,7 +823,6 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
 	cs_cmpl->hdev = hdev;
 	cs_cmpl->type = cs->type;
 	spin_lock_init(&cs_cmpl->lock);
-	INIT_WORK(&cs_cmpl->sob_reset_work, sob_reset_work);
 	cs->fence = &cs_cmpl->base_fence;
 
 	spin_lock(&ctx->cs_lock);
@@ -791,31 +915,22 @@ void hl_cs_rollback_all(struct hl_device *hdev)
 		cs_rollback(hdev, cs);
 		cs_put(cs);
 	}
-}
-
-void hl_pending_cb_list_flush(struct hl_ctx *ctx)
-{
-	struct hl_pending_cb *pending_cb, *tmp;
 
-	list_for_each_entry_safe(pending_cb, tmp,
-			&ctx->pending_cb_list, cb_node) {
-		list_del(&pending_cb->cb_node);
-		hl_cb_put(pending_cb->cb);
-		kfree(pending_cb);
-	}
+	force_complete_multi_cs(hdev);
 }
 
 static void
 wake_pending_user_interrupt_threads(struct hl_user_interrupt *interrupt)
 {
 	struct hl_user_pending_interrupt *pend;
+	unsigned long flags;
 
-	spin_lock(&interrupt->wait_list_lock);
+	spin_lock_irqsave(&interrupt->wait_list_lock, flags);
 	list_for_each_entry(pend, &interrupt->wait_list_head, wait_list_node) {
 		pend->fence.error = -EIO;
 		complete_all(&pend->fence.completion);
 	}
-	spin_unlock(&interrupt->wait_list_lock);
+	spin_unlock_irqrestore(&interrupt->wait_list_lock, flags);
 }
 
 void hl_release_pending_user_interrupts(struct hl_device *hdev)
@@ -981,6 +1096,10 @@ static enum hl_cs_type hl_cs_get_cs_type(u32 cs_type_flags)
 		return CS_TYPE_WAIT;
 	else if (cs_type_flags & HL_CS_FLAGS_COLLECTIVE_WAIT)
 		return CS_TYPE_COLLECTIVE_WAIT;
+	else if (cs_type_flags & HL_CS_FLAGS_RESERVE_SIGNALS_ONLY)
+		return CS_RESERVE_SIGNALS;
+	else if (cs_type_flags & HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY)
+		return CS_UNRESERVE_SIGNALS;
 	else
 		return CS_TYPE_DEFAULT;
 }
@@ -1081,7 +1200,8 @@ static int hl_cs_copy_chunk_array(struct hl_device *hdev,
 }
 
 static int cs_staged_submission(struct hl_device *hdev, struct hl_cs *cs,
-				u64 sequence, u32 flags)
+				u64 sequence, u32 flags,
+				u32 encaps_signal_handle)
 {
 	if (!(flags & HL_CS_FLAGS_STAGED_SUBMISSION))
 		return 0;
@@ -1093,6 +1213,9 @@ static int cs_staged_submission(struct hl_device *hdev, struct hl_cs *cs,
 		/* Staged CS sequence is the first CS sequence */
 		INIT_LIST_HEAD(&cs->staged_cs_node);
 		cs->staged_sequence = cs->sequence;
+
+		if (cs->encaps_signals)
+			cs->encaps_sig_hdl_id = encaps_signal_handle;
 	} else {
 		/* User sequence will be validated in 'hl_hw_queue_schedule_cs'
 		 * under the cs_mirror_lock
@@ -1108,9 +1231,20 @@ static int cs_staged_submission(struct hl_device *hdev, struct hl_cs *cs,
 	return 0;
 }
 
+static u32 get_stream_master_qid_mask(struct hl_device *hdev, u32 qid)
+{
+	int i;
+
+	for (i = 0; i < hdev->stream_master_qid_arr_size; i++)
+		if (qid == hdev->stream_master_qid_arr[i])
+			return BIT(i);
+
+	return 0;
+}
+
 static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
 				u32 num_chunks, u64 *cs_seq, u32 flags,
-				u32 timeout)
+				u32 encaps_signals_handle, u32 timeout)
 {
 	bool staged_mid, int_queues_only = true;
 	struct hl_device *hdev = hpriv->hdev;
@@ -1121,6 +1255,7 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
 	struct hl_cs *cs;
 	struct hl_cb *cb;
 	u64 user_sequence;
+	u8 stream_master_qid_map = 0;
 	int rc, i;
 
 	cntr = &hdev->aggregated_cs_counters;
@@ -1148,7 +1283,8 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
 
 	hl_debugfs_add_cs(cs);
 
-	rc = cs_staged_submission(hdev, cs, user_sequence, flags);
+	rc = cs_staged_submission(hdev, cs, user_sequence, flags,
+						encaps_signals_handle);
 	if (rc)
 		goto free_cs_object;
 
@@ -1179,9 +1315,20 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
 			cb = (struct hl_cb *) (uintptr_t) chunk->cb_handle;
 		}
 
-		if (queue_type == QUEUE_TYPE_EXT || queue_type == QUEUE_TYPE_HW)
+		if (queue_type == QUEUE_TYPE_EXT ||
+						queue_type == QUEUE_TYPE_HW) {
 			int_queues_only = false;
 
+			/*
+			 * store which stream are being used for external/HW
+			 * queues of this CS
+			 */
+			if (hdev->supports_wait_for_multi_cs)
+				stream_master_qid_map |=
+					get_stream_master_qid_mask(hdev,
+							chunk->queue_index);
+		}
+
 		job = hl_cs_allocate_job(hdev, queue_type,
 						is_kernel_allocated_cb);
 		if (!job) {
@@ -1242,6 +1389,13 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
 		goto free_cs_object;
 	}
 
+	/*
+	 * store the (external/HW queues) streams used by the CS in the
+	 * fence object for multi-CS completion
+	 */
+	if (hdev->supports_wait_for_multi_cs)
+		cs->fence->stream_master_qid_map = stream_master_qid_map;
+
 	rc = hl_hw_queue_schedule_cs(cs);
 	if (rc) {
 		if (rc != -EAGAIN)
@@ -1270,130 +1424,6 @@ out:
 	return rc;
 }
 
-static int pending_cb_create_job(struct hl_device *hdev, struct hl_ctx *ctx,
-		struct hl_cs *cs, struct hl_cb *cb, u32 size, u32 hw_queue_id)
-{
-	struct hw_queue_properties *hw_queue_prop;
-	struct hl_cs_counters_atomic *cntr;
-	struct hl_cs_job *job;
-
-	hw_queue_prop = &hdev->asic_prop.hw_queues_props[hw_queue_id];
-	cntr = &hdev->aggregated_cs_counters;
-
-	job = hl_cs_allocate_job(hdev, hw_queue_prop->type, true);
-	if (!job) {
-		atomic64_inc(&ctx->cs_counters.out_of_mem_drop_cnt);
-		atomic64_inc(&cntr->out_of_mem_drop_cnt);
-		dev_err(hdev->dev, "Failed to allocate a new job\n");
-		return -ENOMEM;
-	}
-
-	job->id = 0;
-	job->cs = cs;
-	job->user_cb = cb;
-	atomic_inc(&job->user_cb->cs_cnt);
-	job->user_cb_size = size;
-	job->hw_queue_id = hw_queue_id;
-	job->patched_cb = job->user_cb;
-	job->job_cb_size = job->user_cb_size;
-
-	/* increment refcount as for external queues we get completion */
-	cs_get(cs);
-
-	cs->jobs_in_queue_cnt[job->hw_queue_id]++;
-
-	list_add_tail(&job->cs_node, &cs->job_list);
-
-	hl_debugfs_add_job(hdev, job);
-
-	return 0;
-}
-
-static int hl_submit_pending_cb(struct hl_fpriv *hpriv)
-{
-	struct hl_device *hdev = hpriv->hdev;
-	struct hl_ctx *ctx = hpriv->ctx;
-	struct hl_pending_cb *pending_cb, *tmp;
-	struct list_head local_cb_list;
-	struct hl_cs *cs;
-	struct hl_cb *cb;
-	u32 hw_queue_id;
-	u32 cb_size;
-	int process_list, rc = 0;
-
-	if (list_empty(&ctx->pending_cb_list))
-		return 0;
-
-	process_list = atomic_cmpxchg(&ctx->thread_pending_cb_token, 1, 0);
-
-	/* Only a single thread is allowed to process the list */
-	if (!process_list)
-		return 0;
-
-	if (list_empty(&ctx->pending_cb_list))
-		goto free_pending_cb_token;
-
-	/* move all list elements to a local list */
-	INIT_LIST_HEAD(&local_cb_list);
-	spin_lock(&ctx->pending_cb_lock);
-	list_for_each_entry_safe(pending_cb, tmp, &ctx->pending_cb_list,
-								cb_node)
-		list_move_tail(&pending_cb->cb_node, &local_cb_list);
-	spin_unlock(&ctx->pending_cb_lock);
-
-	rc = allocate_cs(hdev, ctx, CS_TYPE_DEFAULT, ULLONG_MAX, &cs, 0,
-				hdev->timeout_jiffies);
-	if (rc)
-		goto add_list_elements;
-
-	hl_debugfs_add_cs(cs);
-
-	/* Iterate through pending cb list, create jobs and add to CS */
-	list_for_each_entry(pending_cb, &local_cb_list, cb_node) {
-		cb = pending_cb->cb;
-		cb_size = pending_cb->cb_size;
-		hw_queue_id = pending_cb->hw_queue_id;
-
-		rc = pending_cb_create_job(hdev, ctx, cs, cb, cb_size,
-								hw_queue_id);
-		if (rc)
-			goto free_cs_object;
-	}
-
-	rc = hl_hw_queue_schedule_cs(cs);
-	if (rc) {
-		if (rc != -EAGAIN)
-			dev_err(hdev->dev,
-				"Failed to submit CS %d.%llu (%d)\n",
-				ctx->asid, cs->sequence, rc);
-		goto free_cs_object;
-	}
-
-	/* pending cb was scheduled successfully */
-	list_for_each_entry_safe(pending_cb, tmp, &local_cb_list, cb_node) {
-		list_del(&pending_cb->cb_node);
-		kfree(pending_cb);
-	}
-
-	cs_put(cs);
-
-	goto free_pending_cb_token;
-
-free_cs_object:
-	cs_rollback(hdev, cs);
-	cs_put(cs);
-add_list_elements:
-	spin_lock(&ctx->pending_cb_lock);
-	list_for_each_entry_safe_reverse(pending_cb, tmp, &local_cb_list,
-								cb_node)
-		list_move(&pending_cb->cb_node, &ctx->pending_cb_list);
-	spin_unlock(&ctx->pending_cb_lock);
-free_pending_cb_token:
-	atomic_set(&ctx->thread_pending_cb_token, 1);
-
-	return rc;
-}
-
 static int hl_cs_ctx_switch(struct hl_fpriv *hpriv, union hl_cs_args *args,
 				u64 *cs_seq)
 {
@@ -1443,7 +1473,7 @@ static int hl_cs_ctx_switch(struct hl_fpriv *hpriv, union hl_cs_args *args,
 			rc = 0;
 		} else {
 			rc = cs_ioctl_default(hpriv, chunks, num_chunks,
-					cs_seq, 0, hdev->timeout_jiffies);
+					cs_seq, 0, 0, hdev->timeout_jiffies);
 		}
 
 		mutex_unlock(&hpriv->restore_phase_mutex);
@@ -1501,10 +1531,17 @@ out:
  * hl_cs_signal_sob_wraparound_handler: handle SOB value wrapaound case.
  * if the SOB value reaches the max value move to the other SOB reserved
  * to the queue.
+ * @hdev: pointer to device structure
+ * @q_idx: stream queue index
+ * @hw_sob: the H/W SOB used in this signal CS.
+ * @count: signals count
+ * @encaps_sig: tells whether it's reservation for encaps signals or not.
+ *
  * Note that this function must be called while hw_queues_lock is taken.
  */
 int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
-			struct hl_hw_sob **hw_sob, u32 count)
+			struct hl_hw_sob **hw_sob, u32 count, bool encaps_sig)
+
 {
 	struct hl_sync_stream_properties *prop;
 	struct hl_hw_sob *sob = *hw_sob, *other_sob;
@@ -1512,7 +1549,7 @@ int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
 
 	prop = &hdev->kernel_queues[q_idx].sync_stream_prop;
 
-	kref_get(&sob->kref);
+	hw_sob_get(sob);
 
 	/* check for wraparound */
 	if (prop->next_sob_val + count >= HL_MAX_SOB_VAL) {
@@ -1522,7 +1559,7 @@ int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
 		 * just incremented the refcount right before calling this
 		 * function.
 		 */
-		kref_put(&sob->kref, hl_sob_reset_error);
+		hw_sob_put_err(sob);
 
 		/*
 		 * check the other sob value, if it still in use then fail
@@ -1537,12 +1574,42 @@ int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
 			return -EINVAL;
 		}
 
-		prop->next_sob_val = 1;
+		/*
+		 * next_sob_val always points to the next available signal
+		 * in the sob, so in encaps signals it will be the next one
+		 * after reserving the required amount.
+		 */
+		if (encaps_sig)
+			prop->next_sob_val = count + 1;
+		else
+			prop->next_sob_val = count;
 
 		/* only two SOBs are currently in use */
 		prop->curr_sob_offset = other_sob_offset;
 		*hw_sob = other_sob;
 
+		/*
+		 * check if other_sob needs reset, then do it before using it
+		 * for the reservation or the next signal cs.
+		 * we do it here, and for both encaps and regular signal cs
+		 * cases in order to avoid possible races of two kref_put
+		 * of the sob which can occur at the same time if we move the
+		 * sob reset(kref_put) to cs_do_release function.
+		 * in addition, if we have combination of cs signal and
+		 * encaps, and at the point we need to reset the sob there was
+		 * no more reservations and only signal cs keep coming,
+		 * in such case we need signal_cs to put the refcount and
+		 * reset the sob.
+		 */
+		if (other_sob->need_reset)
+			hw_sob_put(other_sob);
+
+		if (encaps_sig) {
+			/* set reset indication for the sob */
+			sob->need_reset = true;
+			hw_sob_get(other_sob);
+		}
+
 		dev_dbg(hdev->dev, "switched to SOB %d, q_idx: %d\n",
 				prop->curr_sob_offset, q_idx);
 	} else {
@@ -1553,12 +1620,18 @@ int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
 }
 
 static int cs_ioctl_extract_signal_seq(struct hl_device *hdev,
-		struct hl_cs_chunk *chunk, u64 *signal_seq, struct hl_ctx *ctx)
+		struct hl_cs_chunk *chunk, u64 *signal_seq, struct hl_ctx *ctx,
+		bool encaps_signals)
 {
 	u64 *signal_seq_arr = NULL;
 	u32 size_to_copy, signal_seq_arr_len;
 	int rc = 0;
 
+	if (encaps_signals) {
+		*signal_seq = chunk->encaps_signal_seq;
+		return 0;
+	}
+
 	signal_seq_arr_len = chunk->num_signal_seq_arr;
 
 	/* currently only one signal seq is supported */
@@ -1583,7 +1656,7 @@ static int cs_ioctl_extract_signal_seq(struct hl_device *hdev,
 		return -ENOMEM;
 	}
 
-	size_to_copy = chunk->num_signal_seq_arr * sizeof(*signal_seq_arr);
+	size_to_copy = signal_seq_arr_len * sizeof(*signal_seq_arr);
 	if (copy_from_user(signal_seq_arr,
 				u64_to_user_ptr(chunk->signal_seq_arr),
 				size_to_copy)) {
@@ -1605,8 +1678,8 @@ out:
 }
 
 static int cs_ioctl_signal_wait_create_jobs(struct hl_device *hdev,
-		struct hl_ctx *ctx, struct hl_cs *cs, enum hl_queue_type q_type,
-		u32 q_idx)
+		struct hl_ctx *ctx, struct hl_cs *cs,
+		enum hl_queue_type q_type, u32 q_idx, u32 encaps_signal_offset)
 {
 	struct hl_cs_counters_atomic *cntr;
 	struct hl_cs_job *job;
@@ -1644,6 +1717,9 @@ static int cs_ioctl_signal_wait_create_jobs(struct hl_device *hdev,
 	job->user_cb_size = cb_size;
 	job->hw_queue_id = q_idx;
 
+	if ((cs->type == CS_TYPE_WAIT || cs->type == CS_TYPE_COLLECTIVE_WAIT)
+			&& cs->encaps_signals)
+		job->encaps_sig_wait_offset = encaps_signal_offset;
 	/*
 	 * No need in parsing, user CB is the patched CB.
 	 * We call hl_cb_destroy() out of two reasons - we don't need the CB in
@@ -1666,11 +1742,196 @@ static int cs_ioctl_signal_wait_create_jobs(struct hl_device *hdev,
 	return 0;
 }
 
+static int cs_ioctl_reserve_signals(struct hl_fpriv *hpriv,
+				u32 q_idx, u32 count,
+				u32 *handle_id, u32 *sob_addr,
+				u32 *signals_count)
+{
+	struct hw_queue_properties *hw_queue_prop;
+	struct hl_sync_stream_properties *prop;
+	struct hl_device *hdev = hpriv->hdev;
+	struct hl_cs_encaps_sig_handle *handle;
+	struct hl_encaps_signals_mgr *mgr;
+	struct hl_hw_sob *hw_sob;
+	int hdl_id;
+	int rc = 0;
+
+	if (count >= HL_MAX_SOB_VAL) {
+		dev_err(hdev->dev, "signals count(%u) exceeds the max SOB value\n",
+						count);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	if (q_idx >= hdev->asic_prop.max_queues) {
+		dev_err(hdev->dev, "Queue index %d is invalid\n",
+			q_idx);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	hw_queue_prop = &hdev->asic_prop.hw_queues_props[q_idx];
+
+	if (!hw_queue_prop->supports_sync_stream) {
+		dev_err(hdev->dev,
+			"Queue index %d does not support sync stream operations\n",
+									q_idx);
+		rc = -EINVAL;
+		goto out;
+	}
+
+	prop = &hdev->kernel_queues[q_idx].sync_stream_prop;
+
+	handle = kzalloc(sizeof(*handle), GFP_KERNEL);
+	if (!handle) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	handle->count = count;
+	mgr = &hpriv->ctx->sig_mgr;
+
+	spin_lock(&mgr->lock);
+	hdl_id = idr_alloc(&mgr->handles, handle, 1, 0, GFP_ATOMIC);
+	spin_unlock(&mgr->lock);
+
+	if (hdl_id < 0) {
+		dev_err(hdev->dev, "Failed to allocate IDR for a new signal reservation\n");
+		rc = -EINVAL;
+		goto out;
+	}
+
+	handle->id = hdl_id;
+	handle->q_idx = q_idx;
+	handle->hdev = hdev;
+	kref_init(&handle->refcount);
+
+	hdev->asic_funcs->hw_queues_lock(hdev);
+
+	hw_sob = &prop->hw_sob[prop->curr_sob_offset];
+
+	/*
+	 * Increment the SOB value by count by user request
+	 * to reserve those signals
+	 * check if the signals amount to reserve is not exceeding the max sob
+	 * value, if yes then switch sob.
+	 */
+	rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, count,
+								true);
+	if (rc) {
+		dev_err(hdev->dev, "Failed to switch SOB\n");
+		hdev->asic_funcs->hw_queues_unlock(hdev);
+		rc = -EINVAL;
+		goto remove_idr;
+	}
+	/* set the hw_sob to the handle after calling the sob wraparound handler
+	 * since sob could have changed.
+	 */
+	handle->hw_sob = hw_sob;
+
+	/* store the current sob value for unreserve validity check, and
+	 * signal offset support
+	 */
+	handle->pre_sob_val = prop->next_sob_val - handle->count;
+
+	*signals_count = prop->next_sob_val;
+	hdev->asic_funcs->hw_queues_unlock(hdev);
+
+	*sob_addr = handle->hw_sob->sob_addr;
+	*handle_id = hdl_id;
+
+	dev_dbg(hdev->dev,
+		"Signals reserved, sob_id: %d, sob addr: 0x%x, last sob_val: %u, q_idx: %d, hdl_id: %d\n",
+			hw_sob->sob_id, handle->hw_sob->sob_addr,
+			prop->next_sob_val - 1, q_idx, hdl_id);
+	goto out;
+
+remove_idr:
+	spin_lock(&mgr->lock);
+	idr_remove(&mgr->handles, hdl_id);
+	spin_unlock(&mgr->lock);
+
+	kfree(handle);
+out:
+	return rc;
+}
+
+static int cs_ioctl_unreserve_signals(struct hl_fpriv *hpriv, u32 handle_id)
+{
+	struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
+	struct hl_sync_stream_properties *prop;
+	struct hl_device *hdev = hpriv->hdev;
+	struct hl_encaps_signals_mgr *mgr;
+	struct hl_hw_sob *hw_sob;
+	u32 q_idx, sob_addr;
+	int rc = 0;
+
+	mgr = &hpriv->ctx->sig_mgr;
+
+	spin_lock(&mgr->lock);
+	encaps_sig_hdl = idr_find(&mgr->handles, handle_id);
+	if (encaps_sig_hdl) {
+		dev_dbg(hdev->dev, "unreserve signals, handle: %u, SOB:0x%x, count: %u\n",
+				handle_id, encaps_sig_hdl->hw_sob->sob_addr,
+					encaps_sig_hdl->count);
+
+		hdev->asic_funcs->hw_queues_lock(hdev);
+
+		q_idx = encaps_sig_hdl->q_idx;
+		prop = &hdev->kernel_queues[q_idx].sync_stream_prop;
+		hw_sob = &prop->hw_sob[prop->curr_sob_offset];
+		sob_addr = hdev->asic_funcs->get_sob_addr(hdev, hw_sob->sob_id);
+
+		/* Check if sob_val got out of sync due to other
+		 * signal submission requests which were handled
+		 * between the reserve-unreserve calls or SOB switch
+		 * upon reaching SOB max value.
+		 */
+		if (encaps_sig_hdl->pre_sob_val + encaps_sig_hdl->count
+				!= prop->next_sob_val ||
+				sob_addr != encaps_sig_hdl->hw_sob->sob_addr) {
+			dev_err(hdev->dev, "Cannot unreserve signals, SOB val ran out of sync, expected: %u, actual val: %u\n",
+				encaps_sig_hdl->pre_sob_val,
+				(prop->next_sob_val - encaps_sig_hdl->count));
+
+			hdev->asic_funcs->hw_queues_unlock(hdev);
+			rc = -EINVAL;
+			goto out;
+		}
+
+		/*
+		 * Decrement the SOB value by count by user request
+		 * to unreserve those signals
+		 */
+		prop->next_sob_val -= encaps_sig_hdl->count;
+
+		hdev->asic_funcs->hw_queues_unlock(hdev);
+
+		hw_sob_put(hw_sob);
+
+		/* Release the id and free allocated memory of the handle */
+		idr_remove(&mgr->handles, handle_id);
+		kfree(encaps_sig_hdl);
+	} else {
+		rc = -EINVAL;
+		dev_err(hdev->dev, "failed to unreserve signals, cannot find handler\n");
+	}
+out:
+	spin_unlock(&mgr->lock);
+
+	return rc;
+}
+
 static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 				void __user *chunks, u32 num_chunks,
 				u64 *cs_seq, u32 flags, u32 timeout)
 {
+	struct hl_cs_encaps_sig_handle *encaps_sig_hdl = NULL;
+	bool handle_found = false, is_wait_cs = false,
+			wait_cs_submitted = false,
+			cs_encaps_signals = false;
 	struct hl_cs_chunk *cs_chunk_array, *chunk;
+	bool staged_cs_with_encaps_signals = false;
 	struct hw_queue_properties *hw_queue_prop;
 	struct hl_device *hdev = hpriv->hdev;
 	struct hl_cs_compl *sig_waitcs_cmpl;
@@ -1730,11 +1991,58 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 		collective_engine_id = chunk->collective_engine_id;
 	}
 
-	if (cs_type == CS_TYPE_WAIT || cs_type == CS_TYPE_COLLECTIVE_WAIT) {
-		rc = cs_ioctl_extract_signal_seq(hdev, chunk, &signal_seq, ctx);
+	is_wait_cs = !!(cs_type == CS_TYPE_WAIT ||
+			cs_type == CS_TYPE_COLLECTIVE_WAIT);
+
+	cs_encaps_signals = !!(flags & HL_CS_FLAGS_ENCAP_SIGNALS);
+
+	if (is_wait_cs) {
+		rc = cs_ioctl_extract_signal_seq(hdev, chunk, &signal_seq,
+				ctx, cs_encaps_signals);
 		if (rc)
 			goto free_cs_chunk_array;
 
+		if (cs_encaps_signals) {
+			/* check if cs sequence has encapsulated
+			 * signals handle
+			 */
+			struct idr *idp;
+			u32 id;
+
+			spin_lock(&ctx->sig_mgr.lock);
+			idp = &ctx->sig_mgr.handles;
+			idr_for_each_entry(idp, encaps_sig_hdl, id) {
+				if (encaps_sig_hdl->cs_seq == signal_seq) {
+					handle_found = true;
+					/* get refcount to protect removing
+					 * this handle from idr, needed when
+					 * multiple wait cs are used with offset
+					 * to wait on reserved encaps signals.
+					 */
+					kref_get(&encaps_sig_hdl->refcount);
+					break;
+				}
+			}
+			spin_unlock(&ctx->sig_mgr.lock);
+
+			if (!handle_found) {
+				dev_err(hdev->dev, "Cannot find encapsulated signals handle for seq 0x%llx\n",
+						signal_seq);
+				rc = -EINVAL;
+				goto free_cs_chunk_array;
+			}
+
+			/* validate also the signal offset value */
+			if (chunk->encaps_signal_offset >
+					encaps_sig_hdl->count) {
+				dev_err(hdev->dev, "offset(%u) value exceed max reserved signals count(%u)!\n",
+						chunk->encaps_signal_offset,
+						encaps_sig_hdl->count);
+				rc = -EINVAL;
+				goto free_cs_chunk_array;
+			}
+		}
+
 		sig_fence = hl_ctx_get_fence(ctx, signal_seq);
 		if (IS_ERR(sig_fence)) {
 			atomic64_inc(&ctx->cs_counters.validation_drop_cnt);
@@ -1755,11 +2063,16 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 		sig_waitcs_cmpl =
 			container_of(sig_fence, struct hl_cs_compl, base_fence);
 
-		if (sig_waitcs_cmpl->type != CS_TYPE_SIGNAL) {
+		staged_cs_with_encaps_signals = !!
+				(sig_waitcs_cmpl->type == CS_TYPE_DEFAULT &&
+				(flags & HL_CS_FLAGS_ENCAP_SIGNALS));
+
+		if (sig_waitcs_cmpl->type != CS_TYPE_SIGNAL &&
+				!staged_cs_with_encaps_signals) {
 			atomic64_inc(&ctx->cs_counters.validation_drop_cnt);
 			atomic64_inc(&cntr->validation_drop_cnt);
 			dev_err(hdev->dev,
-				"CS seq 0x%llx is not of a signal CS\n",
+				"CS seq 0x%llx is not of a signal/encaps-signal CS\n",
 				signal_seq);
 			hl_fence_put(sig_fence);
 			rc = -EINVAL;
@@ -1776,18 +2089,27 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 
 	rc = allocate_cs(hdev, ctx, cs_type, ULLONG_MAX, &cs, flags, timeout);
 	if (rc) {
-		if (cs_type == CS_TYPE_WAIT ||
-			cs_type == CS_TYPE_COLLECTIVE_WAIT)
+		if (is_wait_cs)
 			hl_fence_put(sig_fence);
+
 		goto free_cs_chunk_array;
 	}
 
 	/*
 	 * Save the signal CS fence for later initialization right before
 	 * hanging the wait CS on the queue.
+	 * for encaps signals case, we save the cs sequence and handle pointer
+	 * for later initialization.
 	 */
-	if (cs_type == CS_TYPE_WAIT || cs_type == CS_TYPE_COLLECTIVE_WAIT)
+	if (is_wait_cs) {
 		cs->signal_fence = sig_fence;
+		/* store the handle pointer, so we don't have to
+		 * look for it again, later on the flow
+		 * when we need to set SOB info in hw_queue.
+		 */
+		if (cs->encaps_signals)
+			cs->encaps_sig_hdl = encaps_sig_hdl;
+	}
 
 	hl_debugfs_add_cs(cs);
 
@@ -1795,10 +2117,11 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 
 	if (cs_type == CS_TYPE_WAIT || cs_type == CS_TYPE_SIGNAL)
 		rc = cs_ioctl_signal_wait_create_jobs(hdev, ctx, cs, q_type,
-				q_idx);
+				q_idx, chunk->encaps_signal_offset);
 	else if (cs_type == CS_TYPE_COLLECTIVE_WAIT)
 		rc = hdev->asic_funcs->collective_wait_create_jobs(hdev, ctx,
-				cs, q_idx, collective_engine_id);
+				cs, q_idx, collective_engine_id,
+				chunk->encaps_signal_offset);
 	else {
 		atomic64_inc(&ctx->cs_counters.validation_drop_cnt);
 		atomic64_inc(&cntr->validation_drop_cnt);
@@ -1810,7 +2133,13 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 
 	rc = hl_hw_queue_schedule_cs(cs);
 	if (rc) {
-		if (rc != -EAGAIN)
+		/* In case wait cs failed here, it means the signal cs
+		 * already completed. we want to free all it's related objects
+		 * but we don't want to fail the ioctl.
+		 */
+		if (is_wait_cs)
+			rc = 0;
+		else if (rc != -EAGAIN)
 			dev_err(hdev->dev,
 				"Failed to submit CS %d.%llu to H/W queues, error %d\n",
 				ctx->asid, cs->sequence, rc);
@@ -1818,6 +2147,8 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
 	}
 
 	rc = HL_CS_STATUS_SUCCESS;
+	if (is_wait_cs)
+		wait_cs_submitted = true;
 	goto put_cs;
 
 free_cs_object:
@@ -1828,6 +2159,10 @@ put_cs:
 	/* We finished with the CS in this function, so put the ref */
 	cs_put(cs);
 free_cs_chunk_array:
+	if (!wait_cs_submitted && cs_encaps_signals && handle_found &&
+							is_wait_cs)
+		kref_put(&encaps_sig_hdl->refcount,
+				hl_encaps_handle_do_release);
 	kfree(cs_chunk_array);
 out:
 	return rc;
@@ -1836,10 +2171,11 @@ out:
 int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 {
 	union hl_cs_args *args = data;
-	enum hl_cs_type cs_type;
+	enum hl_cs_type cs_type = 0;
 	u64 cs_seq = ULONG_MAX;
 	void __user *chunks;
-	u32 num_chunks, flags, timeout;
+	u32 num_chunks, flags, timeout,
+		signals_count = 0, sob_addr = 0, handle_id = 0;
 	int rc;
 
 	rc = hl_cs_sanity_checks(hpriv, args);
@@ -1850,10 +2186,6 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 	if (rc)
 		goto out;
 
-	rc = hl_submit_pending_cb(hpriv);
-	if (rc)
-		goto out;
-
 	cs_type = hl_cs_get_cs_type(args->in.cs_flags &
 					~HL_CS_FLAGS_FORCE_RESTORE);
 	chunks = (void __user *) (uintptr_t) args->in.chunks_execute;
@@ -1876,80 +2208,448 @@ int hl_cs_ioctl(struct hl_fpriv *hpriv, void *data)
 		rc = cs_ioctl_signal_wait(hpriv, cs_type, chunks, num_chunks,
 					&cs_seq, args->in.cs_flags, timeout);
 		break;
+	case CS_RESERVE_SIGNALS:
+		rc = cs_ioctl_reserve_signals(hpriv,
+					args->in.encaps_signals_q_idx,
+					args->in.encaps_signals_count,
+					&handle_id, &sob_addr, &signals_count);
+		break;
+	case CS_UNRESERVE_SIGNALS:
+		rc = cs_ioctl_unreserve_signals(hpriv,
+					args->in.encaps_sig_handle_id);
+		break;
 	default:
 		rc = cs_ioctl_default(hpriv, chunks, num_chunks, &cs_seq,
-						args->in.cs_flags, timeout);
+						args->in.cs_flags,
+						args->in.encaps_sig_handle_id,
+						timeout);
 		break;
 	}
-
 out:
 	if (rc != -EAGAIN) {
 		memset(args, 0, sizeof(*args));
+
+		if (cs_type == CS_RESERVE_SIGNALS) {
+			args->out.handle_id = handle_id;
+			args->out.sob_base_addr_offset = sob_addr;
+			args->out.count = signals_count;
+		} else {
+			args->out.seq = cs_seq;
+		}
 		args->out.status = rc;
-		args->out.seq = cs_seq;
 	}
 
 	return rc;
 }
 
+static int hl_wait_for_fence(struct hl_ctx *ctx, u64 seq, struct hl_fence *fence,
+				enum hl_cs_wait_status *status, u64 timeout_us,
+				s64 *timestamp)
+{
+	struct hl_device *hdev = ctx->hdev;
+	long completion_rc;
+	int rc = 0;
+
+	if (IS_ERR(fence)) {
+		rc = PTR_ERR(fence);
+		if (rc == -EINVAL)
+			dev_notice_ratelimited(hdev->dev,
+				"Can't wait on CS %llu because current CS is at seq %llu\n",
+				seq, ctx->cs_sequence);
+		return rc;
+	}
+
+	if (!fence) {
+		dev_dbg(hdev->dev,
+			"Can't wait on seq %llu because current CS is at seq %llu (Fence is gone)\n",
+				seq, ctx->cs_sequence);
+
+		*status = CS_WAIT_STATUS_GONE;
+		return 0;
+	}
+
+	if (!timeout_us) {
+		completion_rc = completion_done(&fence->completion);
+	} else {
+		unsigned long timeout;
+
+		timeout = (timeout_us == MAX_SCHEDULE_TIMEOUT) ?
+				timeout_us : usecs_to_jiffies(timeout_us);
+		completion_rc =
+			wait_for_completion_interruptible_timeout(
+				&fence->completion, timeout);
+	}
+
+	if (completion_rc > 0) {
+		*status = CS_WAIT_STATUS_COMPLETED;
+		if (timestamp)
+			*timestamp = ktime_to_ns(fence->timestamp);
+	} else {
+		*status = CS_WAIT_STATUS_BUSY;
+	}
+
+	if (fence->error == -ETIMEDOUT)
+		rc = -ETIMEDOUT;
+	else if (fence->error == -EIO)
+		rc = -EIO;
+
+	return rc;
+}
+
+/*
+ * hl_cs_poll_fences - iterate CS fences to check for CS completion
+ *
+ * @mcs_data: multi-CS internal data
+ *
+ * @return 0 on success, otherwise non 0 error code
+ *
+ * The function iterates on all CS sequence in the list and set bit in
+ * completion_bitmap for each completed CS.
+ * while iterating, the function can extracts the stream map to be later
+ * used by the waiting function.
+ * this function shall be called after taking context ref
+ */
+static int hl_cs_poll_fences(struct multi_cs_data *mcs_data)
+{
+	struct hl_fence **fence_ptr = mcs_data->fence_arr;
+	struct hl_device *hdev = mcs_data->ctx->hdev;
+	int i, rc, arr_len = mcs_data->arr_len;
+	u64 *seq_arr = mcs_data->seq_arr;
+	ktime_t max_ktime, first_cs_time;
+	enum hl_cs_wait_status status;
+
+	memset(fence_ptr, 0, arr_len * sizeof(*fence_ptr));
+
+	/* get all fences under the same lock */
+	rc = hl_ctx_get_fences(mcs_data->ctx, seq_arr, fence_ptr, arr_len);
+	if (rc)
+		return rc;
+
+	/*
+	 * set to maximum time to verify timestamp is valid: if at the end
+	 * this value is maintained- no timestamp was updated
+	 */
+	max_ktime = ktime_set(KTIME_SEC_MAX, 0);
+	first_cs_time = max_ktime;
+
+	for (i = 0; i < arr_len; i++, fence_ptr++) {
+		struct hl_fence *fence = *fence_ptr;
+
+		/*
+		 * function won't sleep as it is called with timeout 0 (i.e.
+		 * poll the fence)
+		 */
+		rc = hl_wait_for_fence(mcs_data->ctx, seq_arr[i], fence,
+						&status, 0, NULL);
+		if (rc) {
+			dev_err(hdev->dev,
+				"wait_for_fence error :%d for CS seq %llu\n",
+								rc, seq_arr[i]);
+			break;
+		}
+
+		mcs_data->stream_master_qid_map |= fence->stream_master_qid_map;
+
+		if (status == CS_WAIT_STATUS_BUSY)
+			continue;
+
+		mcs_data->completion_bitmap |= BIT(i);
+
+		/*
+		 * best effort to extract timestamp. few notes:
+		 * - if even single fence is gone we cannot extract timestamp
+		 *   (as fence not exist anymore)
+		 * - for all completed CSs we take the earliest timestamp.
+		 *   for this we have to validate that:
+		 *       1. given timestamp was indeed set
+		 *       2. the timestamp is earliest of all timestamps so far
+		 */
+
+		if (status == CS_WAIT_STATUS_GONE) {
+			mcs_data->update_ts = false;
+			mcs_data->gone_cs = true;
+		} else if (mcs_data->update_ts &&
+			(ktime_compare(fence->timestamp,
+						ktime_set(0, 0)) > 0) &&
+			(ktime_compare(fence->timestamp, first_cs_time) < 0)) {
+			first_cs_time = fence->timestamp;
+		}
+	}
+
+	hl_fences_put(mcs_data->fence_arr, arr_len);
+
+	if (mcs_data->update_ts &&
+			(ktime_compare(first_cs_time, max_ktime) != 0))
+		mcs_data->timestamp = ktime_to_ns(first_cs_time);
+
+	return rc;
+}
+
 static int _hl_cs_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
 				u64 timeout_us, u64 seq,
 				enum hl_cs_wait_status *status, s64 *timestamp)
 {
 	struct hl_fence *fence;
-	unsigned long timeout;
 	int rc = 0;
-	long completion_rc;
 
 	if (timestamp)
 		*timestamp = 0;
 
-	if (timeout_us == MAX_SCHEDULE_TIMEOUT)
-		timeout = timeout_us;
-	else
-		timeout = usecs_to_jiffies(timeout_us);
-
 	hl_ctx_get(hdev, ctx);
 
 	fence = hl_ctx_get_fence(ctx, seq);
-	if (IS_ERR(fence)) {
-		rc = PTR_ERR(fence);
-		if (rc == -EINVAL)
-			dev_notice_ratelimited(hdev->dev,
-				"Can't wait on CS %llu because current CS is at seq %llu\n",
-				seq, ctx->cs_sequence);
-	} else if (fence) {
-		if (!timeout_us)
-			completion_rc = completion_done(&fence->completion);
-		else
-			completion_rc =
-				wait_for_completion_interruptible_timeout(
-					&fence->completion, timeout);
 
-		if (completion_rc > 0) {
-			*status = CS_WAIT_STATUS_COMPLETED;
-			if (timestamp)
-				*timestamp = ktime_to_ns(fence->timestamp);
-		} else {
-			*status = CS_WAIT_STATUS_BUSY;
+	rc = hl_wait_for_fence(ctx, seq, fence, status, timeout_us, timestamp);
+	hl_fence_put(fence);
+	hl_ctx_put(ctx);
+
+	return rc;
+}
+
+/*
+ * hl_wait_multi_cs_completion_init - init completion structure
+ *
+ * @hdev: pointer to habanalabs device structure
+ * @stream_master_bitmap: stream master QIDs map, set bit indicates stream
+ *                        master QID to wait on
+ *
+ * @return valid completion struct pointer on success, otherwise error pointer
+ *
+ * up to MULTI_CS_MAX_USER_CTX calls can be done concurrently to the driver.
+ * the function gets the first available completion (by marking it "used")
+ * and initialize its values.
+ */
+static struct multi_cs_completion *hl_wait_multi_cs_completion_init(
+							struct hl_device *hdev,
+							u8 stream_master_bitmap)
+{
+	struct multi_cs_completion *mcs_compl;
+	int i;
+
+	/* find free multi_cs completion structure */
+	for (i = 0; i < MULTI_CS_MAX_USER_CTX; i++) {
+		mcs_compl = &hdev->multi_cs_completion[i];
+		spin_lock(&mcs_compl->lock);
+		if (!mcs_compl->used) {
+			mcs_compl->used = 1;
+			mcs_compl->timestamp = 0;
+			mcs_compl->stream_master_qid_map = stream_master_bitmap;
+			reinit_completion(&mcs_compl->completion);
+			spin_unlock(&mcs_compl->lock);
+			break;
 		}
+		spin_unlock(&mcs_compl->lock);
+	}
 
-		if (fence->error == -ETIMEDOUT)
-			rc = -ETIMEDOUT;
-		else if (fence->error == -EIO)
-			rc = -EIO;
+	if (i == MULTI_CS_MAX_USER_CTX) {
+		dev_err(hdev->dev,
+				"no available multi-CS completion structure\n");
+		return ERR_PTR(-ENOMEM);
+	}
+	return mcs_compl;
+}
 
-		hl_fence_put(fence);
-	} else {
-		dev_dbg(hdev->dev,
-			"Can't wait on seq %llu because current CS is at seq %llu (Fence is gone)\n",
-			seq, ctx->cs_sequence);
-		*status = CS_WAIT_STATUS_GONE;
+/*
+ * hl_wait_multi_cs_completion_fini - return completion structure and set as
+ *                                    unused
+ *
+ * @mcs_compl: pointer to the completion structure
+ */
+static void hl_wait_multi_cs_completion_fini(
+					struct multi_cs_completion *mcs_compl)
+{
+	/*
+	 * free completion structure, do it under lock to be in-sync with the
+	 * thread that signals completion
+	 */
+	spin_lock(&mcs_compl->lock);
+	mcs_compl->used = 0;
+	spin_unlock(&mcs_compl->lock);
+}
+
+/*
+ * hl_wait_multi_cs_completion - wait for first CS to complete
+ *
+ * @mcs_data: multi-CS internal data
+ *
+ * @return 0 on success, otherwise non 0 error code
+ */
+static int hl_wait_multi_cs_completion(struct multi_cs_data *mcs_data)
+{
+	struct hl_device *hdev = mcs_data->ctx->hdev;
+	struct multi_cs_completion *mcs_compl;
+	long completion_rc;
+
+	mcs_compl = hl_wait_multi_cs_completion_init(hdev,
+					mcs_data->stream_master_qid_map);
+	if (IS_ERR(mcs_compl))
+		return PTR_ERR(mcs_compl);
+
+	completion_rc = wait_for_completion_interruptible_timeout(
+					&mcs_compl->completion,
+					usecs_to_jiffies(mcs_data->timeout_us));
+
+	/* update timestamp */
+	if (completion_rc > 0)
+		mcs_data->timestamp = mcs_compl->timestamp;
+
+	hl_wait_multi_cs_completion_fini(mcs_compl);
+
+	mcs_data->wait_status = completion_rc;
+
+	return 0;
+}
+
+/*
+ * hl_multi_cs_completion_init - init array of multi-CS completion structures
+ *
+ * @hdev: pointer to habanalabs device structure
+ */
+void hl_multi_cs_completion_init(struct hl_device *hdev)
+{
+	struct multi_cs_completion *mcs_cmpl;
+	int i;
+
+	for (i = 0; i < MULTI_CS_MAX_USER_CTX; i++) {
+		mcs_cmpl = &hdev->multi_cs_completion[i];
+		mcs_cmpl->used = 0;
+		spin_lock_init(&mcs_cmpl->lock);
+		init_completion(&mcs_cmpl->completion);
+	}
+}
+
+/*
+ * hl_multi_cs_wait_ioctl - implementation of the multi-CS wait ioctl
+ *
+ * @hpriv: pointer to the private data of the fd
+ * @data: pointer to multi-CS wait ioctl in/out args
+ *
+ */
+static int hl_multi_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
+{
+	struct hl_device *hdev = hpriv->hdev;
+	struct multi_cs_data mcs_data = {0};
+	union hl_wait_cs_args *args = data;
+	struct hl_ctx *ctx = hpriv->ctx;
+	struct hl_fence **fence_arr;
+	void __user *seq_arr;
+	u32 size_to_copy;
+	u64 *cs_seq_arr;
+	u8 seq_arr_len;
+	int rc;
+
+	if (!hdev->supports_wait_for_multi_cs) {
+		dev_err(hdev->dev, "Wait for multi CS is not supported\n");
+		return -EPERM;
+	}
+
+	seq_arr_len = args->in.seq_arr_len;
+
+	if (seq_arr_len > HL_WAIT_MULTI_CS_LIST_MAX_LEN) {
+		dev_err(hdev->dev, "Can wait only up to %d CSs, input sequence is of length %u\n",
+				HL_WAIT_MULTI_CS_LIST_MAX_LEN, seq_arr_len);
+		return -EINVAL;
+	}
+
+	/* allocate memory for sequence array */
+	cs_seq_arr =
+		kmalloc_array(seq_arr_len, sizeof(*cs_seq_arr), GFP_KERNEL);
+	if (!cs_seq_arr)
+		return -ENOMEM;
+
+	/* copy CS sequence array from user */
+	seq_arr = (void __user *) (uintptr_t) args->in.seq;
+	size_to_copy = seq_arr_len * sizeof(*cs_seq_arr);
+	if (copy_from_user(cs_seq_arr, seq_arr, size_to_copy)) {
+		dev_err(hdev->dev, "Failed to copy multi-cs sequence array from user\n");
+		rc = -EFAULT;
+		goto free_seq_arr;
+	}
+
+	/* allocate array for the fences */
+	fence_arr = kmalloc_array(seq_arr_len, sizeof(*fence_arr), GFP_KERNEL);
+	if (!fence_arr) {
+		rc = -ENOMEM;
+		goto free_seq_arr;
+	}
+
+	/* initialize the multi-CS internal data */
+	mcs_data.ctx = ctx;
+	mcs_data.seq_arr = cs_seq_arr;
+	mcs_data.fence_arr = fence_arr;
+	mcs_data.arr_len = seq_arr_len;
+
+	hl_ctx_get(hdev, ctx);
+
+	/* poll all CS fences, extract timestamp */
+	mcs_data.update_ts = true;
+	rc = hl_cs_poll_fences(&mcs_data);
+	/*
+	 * skip wait for CS completion when one of the below is true:
+	 * - an error on the poll function
+	 * - one or more CS in the list completed
+	 * - the user called ioctl with timeout 0
+	 */
+	if (rc || mcs_data.completion_bitmap || !args->in.timeout_us)
+		goto put_ctx;
+
+	/* wait (with timeout) for the first CS to be completed */
+	mcs_data.timeout_us = args->in.timeout_us;
+	rc = hl_wait_multi_cs_completion(&mcs_data);
+	if (rc)
+		goto put_ctx;
+
+	if (mcs_data.wait_status > 0) {
+		/*
+		 * poll fences once again to update the CS map.
+		 * no timestamp should be updated this time.
+		 */
+		mcs_data.update_ts = false;
+		rc = hl_cs_poll_fences(&mcs_data);
+
+		/*
+		 * if hl_wait_multi_cs_completion returned before timeout (i.e.
+		 * it got a completion) we expect to see at least one CS
+		 * completed after the poll function.
+		 */
+		if (!mcs_data.completion_bitmap) {
+			dev_err(hdev->dev, "Multi-CS got completion on wait but no CS completed\n");
+			rc = -EFAULT;
+		}
 	}
 
+put_ctx:
 	hl_ctx_put(ctx);
+	kfree(fence_arr);
 
-	return rc;
+free_seq_arr:
+	kfree(cs_seq_arr);
+
+	/* update output args */
+	memset(args, 0, sizeof(*args));
+	if (rc)
+		return rc;
+
+	if (mcs_data.completion_bitmap) {
+		args->out.status = HL_WAIT_CS_STATUS_COMPLETED;
+		args->out.cs_completion_map = mcs_data.completion_bitmap;
+
+		/* if timestamp not 0- it's valid */
+		if (mcs_data.timestamp) {
+			args->out.timestamp_nsec = mcs_data.timestamp;
+			args->out.flags |= HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD;
+		}
+
+		/* update if some CS was gone */
+		if (mcs_data.timestamp)
+			args->out.flags |= HL_WAIT_CS_STATUS_FLAG_GONE;
+	} else if (mcs_data.wait_status == -ERESTARTSYS) {
+		args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED;
+	} else {
+		args->out.status = HL_WAIT_CS_STATUS_BUSY;
+	}
+
+	return 0;
 }
 
 static int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
@@ -2015,9 +2715,9 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
 {
 	struct hl_user_pending_interrupt *pend;
 	struct hl_user_interrupt *interrupt;
-	unsigned long timeout;
-	long completion_rc;
+	unsigned long timeout, flags;
 	u32 completion_value;
+	long completion_rc;
 	int rc = 0;
 
 	if (timeout_us == U32_MAX)
@@ -2040,17 +2740,10 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
 	else
 		interrupt = &hdev->user_interrupt[interrupt_offset];
 
-	spin_lock(&interrupt->wait_list_lock);
-	if (!hl_device_operational(hdev, NULL)) {
-		rc = -EPERM;
-		goto unlock_and_free_fence;
-	}
-
 	if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) {
-		dev_err(hdev->dev,
-			"Failed to copy completion value from user\n");
+		dev_err(hdev->dev, "Failed to copy completion value from user\n");
 		rc = -EFAULT;
-		goto unlock_and_free_fence;
+		goto free_fence;
 	}
 
 	if (completion_value >= target_value)
@@ -2059,48 +2752,57 @@ static int _hl_interrupt_wait_ioctl(struct hl_device *hdev, struct hl_ctx *ctx,
 		*status = CS_WAIT_STATUS_BUSY;
 
 	if (!timeout_us || (*status == CS_WAIT_STATUS_COMPLETED))
-		goto unlock_and_free_fence;
+		goto free_fence;
 
 	/* Add pending user interrupt to relevant list for the interrupt
 	 * handler to monitor
 	 */
+	spin_lock_irqsave(&interrupt->wait_list_lock, flags);
 	list_add_tail(&pend->wait_list_node, &interrupt->wait_list_head);
-	spin_unlock(&interrupt->wait_list_lock);
+	spin_unlock_irqrestore(&interrupt->wait_list_lock, flags);
 
 wait_again:
 	/* Wait for interrupt handler to signal completion */
-	completion_rc =
-		wait_for_completion_interruptible_timeout(
-				&pend->fence.completion, timeout);
+	completion_rc = wait_for_completion_interruptible_timeout(&pend->fence.completion,
+										timeout);
 
 	/* If timeout did not expire we need to perform the comparison.
 	 * If comparison fails, keep waiting until timeout expires
 	 */
 	if (completion_rc > 0) {
-		if (copy_from_user(&completion_value,
-				u64_to_user_ptr(user_address), 4)) {
-			dev_err(hdev->dev,
-				"Failed to copy completion value from user\n");
+		if (copy_from_user(&completion_value, u64_to_user_ptr(user_address), 4)) {
+			dev_err(hdev->dev, "Failed to copy completion value from user\n");
 			rc = -EFAULT;
+
 			goto remove_pending_user_interrupt;
 		}
 
 		if (completion_value >= target_value) {
 			*status = CS_WAIT_STATUS_COMPLETED;
 		} else {
+			spin_lock_irqsave(&interrupt->wait_list_lock, flags);
+			reinit_completion(&pend->fence.completion);
 			timeout = completion_rc;
+
+			spin_unlock_irqrestore(&interrupt->wait_list_lock, flags);
 			goto wait_again;
 		}
+	} else if (completion_rc == -ERESTARTSYS) {
+		dev_err_ratelimited(hdev->dev,
+			"user process got signal while waiting for interrupt ID %d\n",
+			interrupt->interrupt_id);
+		*status = HL_WAIT_CS_STATUS_INTERRUPTED;
+		rc = -EINTR;
 	} else {
 		*status = CS_WAIT_STATUS_BUSY;
 	}
 
 remove_pending_user_interrupt:
-	spin_lock(&interrupt->wait_list_lock);
+	spin_lock_irqsave(&interrupt->wait_list_lock, flags);
 	list_del(&pend->wait_list_node);
+	spin_unlock_irqrestore(&interrupt->wait_list_lock, flags);
 
-unlock_and_free_fence:
-	spin_unlock(&interrupt->wait_list_lock);
+free_fence:
 	kfree(pend);
 	hl_ctx_put(ctx);
 
@@ -2148,8 +2850,9 @@ static int hl_interrupt_wait_ioctl(struct hl_fpriv *hpriv, void *data)
 	memset(args, 0, sizeof(*args));
 
 	if (rc) {
-		dev_err_ratelimited(hdev->dev,
-			"interrupt_wait_ioctl failed (%d)\n", rc);
+		if (rc != -EINTR)
+			dev_err_ratelimited(hdev->dev,
+				"interrupt_wait_ioctl failed (%d)\n", rc);
 
 		return rc;
 	}
@@ -2173,8 +2876,16 @@ int hl_wait_ioctl(struct hl_fpriv *hpriv, void *data)
 	u32 flags = args->in.flags;
 	int rc;
 
+	/* If the device is not operational, no point in waiting for any command submission or
+	 * user interrupt
+	 */
+	if (!hl_device_operational(hpriv->hdev, NULL))
+		return -EPERM;
+
 	if (flags & HL_WAIT_CS_FLAGS_INTERRUPT)
 		rc = hl_interrupt_wait_ioctl(hpriv, data);
+	else if (flags & HL_WAIT_CS_FLAGS_MULTI_CS)
+		rc = hl_multi_cs_wait_ioctl(hpriv, data);
 	else
 		rc = hl_cs_wait_ioctl(hpriv, data);
 
diff --git a/drivers/misc/habanalabs/common/context.c b/drivers/misc/habanalabs/common/context.c
index 19b6b045219e..22978303ad63 100644
--- a/drivers/misc/habanalabs/common/context.c
+++ b/drivers/misc/habanalabs/common/context.c
@@ -9,16 +9,70 @@
 
 #include <linux/slab.h>
 
+void hl_encaps_handle_do_release(struct kref *ref)
+{
+	struct hl_cs_encaps_sig_handle *handle =
+		container_of(ref, struct hl_cs_encaps_sig_handle, refcount);
+	struct hl_ctx *ctx = handle->hdev->compute_ctx;
+	struct hl_encaps_signals_mgr *mgr = &ctx->sig_mgr;
+
+	spin_lock(&mgr->lock);
+	idr_remove(&mgr->handles, handle->id);
+	spin_unlock(&mgr->lock);
+
+	kfree(handle);
+}
+
+static void hl_encaps_handle_do_release_sob(struct kref *ref)
+{
+	struct hl_cs_encaps_sig_handle *handle =
+		container_of(ref, struct hl_cs_encaps_sig_handle, refcount);
+	struct hl_ctx *ctx = handle->hdev->compute_ctx;
+	struct hl_encaps_signals_mgr *mgr = &ctx->sig_mgr;
+
+	/* if we're here, then there was a signals reservation but cs with
+	 * encaps signals wasn't submitted, so need to put refcount
+	 * to hw_sob taken at the reservation.
+	 */
+	hw_sob_put(handle->hw_sob);
+
+	spin_lock(&mgr->lock);
+	idr_remove(&mgr->handles, handle->id);
+	spin_unlock(&mgr->lock);
+
+	kfree(handle);
+}
+
+static void hl_encaps_sig_mgr_init(struct hl_encaps_signals_mgr *mgr)
+{
+	spin_lock_init(&mgr->lock);
+	idr_init(&mgr->handles);
+}
+
+static void hl_encaps_sig_mgr_fini(struct hl_device *hdev,
+			struct hl_encaps_signals_mgr *mgr)
+{
+	struct hl_cs_encaps_sig_handle *handle;
+	struct idr *idp;
+	u32 id;
+
+	idp = &mgr->handles;
+
+	if (!idr_is_empty(idp)) {
+		dev_warn(hdev->dev, "device released while some encaps signals handles are still allocated\n");
+		idr_for_each_entry(idp, handle, id)
+			kref_put(&handle->refcount,
+					hl_encaps_handle_do_release_sob);
+	}
+
+	idr_destroy(&mgr->handles);
+}
+
 static void hl_ctx_fini(struct hl_ctx *ctx)
 {
 	struct hl_device *hdev = ctx->hdev;
 	int i;
 
-	/* Release all allocated pending cb's, those cb's were never
-	 * scheduled so it is safe to release them here
-	 */
-	hl_pending_cb_list_flush(ctx);
-
 	/* Release all allocated HW block mapped list entries and destroy
 	 * the mutex.
 	 */
@@ -53,6 +107,7 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
 		hl_cb_va_pool_fini(ctx);
 		hl_vm_ctx_fini(ctx);
 		hl_asid_free(hdev, ctx->asid);
+		hl_encaps_sig_mgr_fini(hdev, &ctx->sig_mgr);
 
 		/* Scrub both SRAM and DRAM */
 		hdev->asic_funcs->scrub_device_mem(hdev, 0, 0);
@@ -130,9 +185,6 @@ void hl_ctx_free(struct hl_device *hdev, struct hl_ctx *ctx)
 {
 	if (kref_put(&ctx->refcount, hl_ctx_do_release) == 1)
 		return;
-
-	dev_warn(hdev->dev,
-		"user process released device but its command submissions are still executing\n");
 }
 
 int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
@@ -144,11 +196,8 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
 	kref_init(&ctx->refcount);
 
 	ctx->cs_sequence = 1;
-	INIT_LIST_HEAD(&ctx->pending_cb_list);
-	spin_lock_init(&ctx->pending_cb_lock);
 	spin_lock_init(&ctx->cs_lock);
 	atomic_set(&ctx->thread_ctx_switch_token, 1);
-	atomic_set(&ctx->thread_pending_cb_token, 1);
 	ctx->thread_ctx_switch_wait_token = 0;
 	ctx->cs_pending = kcalloc(hdev->asic_prop.max_pending_cs,
 				sizeof(struct hl_fence *),
@@ -200,6 +249,8 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
 			goto err_cb_va_pool_fini;
 		}
 
+		hl_encaps_sig_mgr_init(&ctx->sig_mgr);
+
 		dev_dbg(hdev->dev, "create user context %d\n", ctx->asid);
 	}
 
@@ -229,25 +280,40 @@ int hl_ctx_put(struct hl_ctx *ctx)
 	return kref_put(&ctx->refcount, hl_ctx_do_release);
 }
 
-struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
+/*
+ * hl_ctx_get_fence_locked - get CS fence under CS lock
+ *
+ * @ctx: pointer to the context structure.
+ * @seq: CS sequences number
+ *
+ * @return valid fence pointer on success, NULL if fence is gone, otherwise
+ *         error pointer.
+ *
+ * NOTE: this function shall be called with cs_lock locked
+ */
+static struct hl_fence *hl_ctx_get_fence_locked(struct hl_ctx *ctx, u64 seq)
 {
 	struct asic_fixed_properties *asic_prop = &ctx->hdev->asic_prop;
 	struct hl_fence *fence;
 
-	spin_lock(&ctx->cs_lock);
-
-	if (seq >= ctx->cs_sequence) {
-		spin_unlock(&ctx->cs_lock);
+	if (seq >= ctx->cs_sequence)
 		return ERR_PTR(-EINVAL);
-	}
 
-	if (seq + asic_prop->max_pending_cs < ctx->cs_sequence) {
-		spin_unlock(&ctx->cs_lock);
+	if (seq + asic_prop->max_pending_cs < ctx->cs_sequence)
 		return NULL;
-	}
 
 	fence = ctx->cs_pending[seq & (asic_prop->max_pending_cs - 1)];
 	hl_fence_get(fence);
+	return fence;
+}
+
+struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
+{
+	struct hl_fence *fence;
+
+	spin_lock(&ctx->cs_lock);
+
+	fence = hl_ctx_get_fence_locked(ctx, seq);
 
 	spin_unlock(&ctx->cs_lock);
 
@@ -255,6 +321,46 @@ struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
 }
 
 /*
+ * hl_ctx_get_fences - get multiple CS fences under the same CS lock
+ *
+ * @ctx: pointer to the context structure.
+ * @seq_arr: array of CS sequences to wait for
+ * @fence: fence array to store the CS fences
+ * @arr_len: length of seq_arr and fence_arr
+ *
+ * @return 0 on success, otherwise non 0 error code
+ */
+int hl_ctx_get_fences(struct hl_ctx *ctx, u64 *seq_arr,
+				struct hl_fence **fence, u32 arr_len)
+{
+	struct hl_fence **fence_arr_base = fence;
+	int i, rc = 0;
+
+	spin_lock(&ctx->cs_lock);
+
+	for (i = 0; i < arr_len; i++, fence++) {
+		u64 seq = seq_arr[i];
+
+		*fence = hl_ctx_get_fence_locked(ctx, seq);
+
+		if (IS_ERR(*fence)) {
+			dev_err(ctx->hdev->dev,
+				"Failed to get fence for CS with seq 0x%llx\n",
+					seq);
+			rc = PTR_ERR(*fence);
+			break;
+		}
+	}
+
+	spin_unlock(&ctx->cs_lock);
+
+	if (rc)
+		hl_fences_put(fence_arr_base, i);
+
+	return rc;
+}
+
+/*
  * hl_ctx_mgr_init - initialize the context manager
  *
  * @mgr: pointer to context manager structure
diff --git a/drivers/misc/habanalabs/common/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 703d79fb6f3f..985f1f3dbd20 100644
--- a/drivers/misc/habanalabs/common/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -209,12 +209,12 @@ static int userptr_show(struct seq_file *s, void *data)
 		if (first) {
 			first = false;
 			seq_puts(s, "\n");
-			seq_puts(s, " user virtual address     size             dma dir\n");
+			seq_puts(s, " pid      user virtual address     size             dma dir\n");
 			seq_puts(s, "----------------------------------------------------------\n");
 		}
-		seq_printf(s,
-			"    0x%-14llx      %-10u    %-30s\n",
-			userptr->addr, userptr->size, dma_dir[userptr->dir]);
+		seq_printf(s, " %-7d  0x%-14llx      %-10llu    %-30s\n",
+				userptr->pid, userptr->addr, userptr->size,
+				dma_dir[userptr->dir]);
 	}
 
 	spin_unlock(&dev_entry->userptr_spinlock);
@@ -235,7 +235,7 @@ static int vm_show(struct seq_file *s, void *data)
 	struct hl_vm_hash_node *hnode;
 	struct hl_userptr *userptr;
 	struct hl_vm_phys_pg_pack *phys_pg_pack = NULL;
-	enum vm_type_t *vm_type;
+	enum vm_type *vm_type;
 	bool once = true;
 	u64 j;
 	int i;
@@ -261,7 +261,7 @@ static int vm_show(struct seq_file *s, void *data)
 			if (*vm_type == VM_TYPE_USERPTR) {
 				userptr = hnode->ptr;
 				seq_printf(s,
-					"    0x%-14llx      %-10u\n",
+					"    0x%-14llx      %-10llu\n",
 					hnode->vaddr, userptr->size);
 			} else {
 				phys_pg_pack = hnode->ptr;
@@ -320,6 +320,77 @@ static int vm_show(struct seq_file *s, void *data)
 	return 0;
 }
 
+static int userptr_lookup_show(struct seq_file *s, void *data)
+{
+	struct hl_debugfs_entry *entry = s->private;
+	struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
+	struct scatterlist *sg;
+	struct hl_userptr *userptr;
+	bool first = true;
+	u64 total_npages, npages, sg_start, sg_end;
+	dma_addr_t dma_addr;
+	int i;
+
+	spin_lock(&dev_entry->userptr_spinlock);
+
+	list_for_each_entry(userptr, &dev_entry->userptr_list, debugfs_list) {
+		if (dev_entry->userptr_lookup >= userptr->addr &&
+		dev_entry->userptr_lookup < userptr->addr + userptr->size) {
+			total_npages = 0;
+			for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents,
+					i) {
+				npages = hl_get_sg_info(sg, &dma_addr);
+				sg_start = userptr->addr +
+					total_npages * PAGE_SIZE;
+				sg_end = userptr->addr +
+					(total_npages + npages) * PAGE_SIZE;
+
+				if (dev_entry->userptr_lookup >= sg_start &&
+				    dev_entry->userptr_lookup < sg_end) {
+					dma_addr += (dev_entry->userptr_lookup -
+							sg_start);
+					if (first) {
+						first = false;
+						seq_puts(s, "\n");
+						seq_puts(s, " user virtual address         dma address       pid        region start     region size\n");
+						seq_puts(s, "---------------------------------------------------------------------------------------\n");
+					}
+					seq_printf(s, " 0x%-18llx  0x%-16llx  %-8u  0x%-16llx %-12llu\n",
+						dev_entry->userptr_lookup,
+						(u64)dma_addr, userptr->pid,
+						userptr->addr, userptr->size);
+				}
+				total_npages += npages;
+			}
+		}
+	}
+
+	spin_unlock(&dev_entry->userptr_spinlock);
+
+	if (!first)
+		seq_puts(s, "\n");
+
+	return 0;
+}
+
+static ssize_t userptr_lookup_write(struct file *file, const char __user *buf,
+		size_t count, loff_t *f_pos)
+{
+	struct seq_file *s = file->private_data;
+	struct hl_debugfs_entry *entry = s->private;
+	struct hl_dbg_device_entry *dev_entry = entry->dev_entry;
+	ssize_t rc;
+	u64 value;
+
+	rc = kstrtoull_from_user(buf, count, 16, &value);
+	if (rc)
+		return rc;
+
+	dev_entry->userptr_lookup = value;
+
+	return count;
+}
+
 static int mmu_show(struct seq_file *s, void *data)
 {
 	struct hl_debugfs_entry *entry = s->private;
@@ -349,7 +420,7 @@ static int mmu_show(struct seq_file *s, void *data)
 		return 0;
 	}
 
-	phys_addr = hops_info.hop_info[hops_info.used_hops - 1].hop_pte_val;
+	hl_mmu_va_to_pa(ctx, virt_addr, &phys_addr);
 
 	if (hops_info.scrambled_vaddr &&
 		(dev_entry->mmu_addr != hops_info.scrambled_vaddr))
@@ -491,11 +562,10 @@ static int device_va_to_pa(struct hl_device *hdev, u64 virt_addr, u32 size,
 	struct hl_vm_phys_pg_pack *phys_pg_pack;
 	struct hl_ctx *ctx = hdev->compute_ctx;
 	struct hl_vm_hash_node *hnode;
+	u64 end_address, range_size;
 	struct hl_userptr *userptr;
-	enum vm_type_t *vm_type;
+	enum vm_type *vm_type;
 	bool valid = false;
-	u64 end_address;
-	u32 range_size;
 	int i, rc = 0;
 
 	if (!ctx) {
@@ -1043,6 +1113,60 @@ static ssize_t hl_security_violations_read(struct file *f, char __user *buf,
 	return 0;
 }
 
+static ssize_t hl_state_dump_read(struct file *f, char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
+	ssize_t rc;
+
+	down_read(&entry->state_dump_sem);
+	if (!entry->state_dump[entry->state_dump_head])
+		rc = 0;
+	else
+		rc = simple_read_from_buffer(
+			buf, count, ppos,
+			entry->state_dump[entry->state_dump_head],
+			strlen(entry->state_dump[entry->state_dump_head]));
+	up_read(&entry->state_dump_sem);
+
+	return rc;
+}
+
+static ssize_t hl_state_dump_write(struct file *f, const char __user *buf,
+					size_t count, loff_t *ppos)
+{
+	struct hl_dbg_device_entry *entry = file_inode(f)->i_private;
+	struct hl_device *hdev = entry->hdev;
+	ssize_t rc;
+	u32 size;
+	int i;
+
+	rc = kstrtouint_from_user(buf, count, 10, &size);
+	if (rc)
+		return rc;
+
+	if (size <= 0 || size >= ARRAY_SIZE(entry->state_dump)) {
+		dev_err(hdev->dev, "Invalid number of dumps to skip\n");
+		return -EINVAL;
+	}
+
+	if (entry->state_dump[entry->state_dump_head]) {
+		down_write(&entry->state_dump_sem);
+		for (i = 0; i < size; ++i) {
+			vfree(entry->state_dump[entry->state_dump_head]);
+			entry->state_dump[entry->state_dump_head] = NULL;
+			if (entry->state_dump_head > 0)
+				entry->state_dump_head--;
+			else
+				entry->state_dump_head =
+					ARRAY_SIZE(entry->state_dump) - 1;
+		}
+		up_write(&entry->state_dump_sem);
+	}
+
+	return count;
+}
+
 static const struct file_operations hl_data32b_fops = {
 	.owner = THIS_MODULE,
 	.read = hl_data_read32,
@@ -1110,12 +1234,19 @@ static const struct file_operations hl_security_violations_fops = {
 	.read = hl_security_violations_read
 };
 
+static const struct file_operations hl_state_dump_fops = {
+	.owner = THIS_MODULE,
+	.read = hl_state_dump_read,
+	.write = hl_state_dump_write
+};
+
 static const struct hl_info_list hl_debugfs_list[] = {
 	{"command_buffers", command_buffers_show, NULL},
 	{"command_submission", command_submission_show, NULL},
 	{"command_submission_jobs", command_submission_jobs_show, NULL},
 	{"userptr", userptr_show, NULL},
 	{"vm", vm_show, NULL},
+	{"userptr_lookup", userptr_lookup_show, userptr_lookup_write},
 	{"mmu", mmu_show, mmu_asid_va_write},
 	{"engines", engines_show, NULL}
 };
@@ -1172,6 +1303,7 @@ void hl_debugfs_add_device(struct hl_device *hdev)
 	INIT_LIST_HEAD(&dev_entry->userptr_list);
 	INIT_LIST_HEAD(&dev_entry->ctx_mem_hash_list);
 	mutex_init(&dev_entry->file_mutex);
+	init_rwsem(&dev_entry->state_dump_sem);
 	spin_lock_init(&dev_entry->cb_spinlock);
 	spin_lock_init(&dev_entry->cs_spinlock);
 	spin_lock_init(&dev_entry->cs_job_spinlock);
@@ -1283,6 +1415,12 @@ void hl_debugfs_add_device(struct hl_device *hdev)
 				dev_entry->root,
 				&hdev->skip_reset_on_timeout);
 
+	debugfs_create_file("state_dump",
+				0600,
+				dev_entry->root,
+				dev_entry,
+				&hl_state_dump_fops);
+
 	for (i = 0, entry = dev_entry->entry_arr ; i < count ; i++, entry++) {
 		debugfs_create_file(hl_debugfs_list[i].name,
 					0444,
@@ -1297,6 +1435,7 @@ void hl_debugfs_add_device(struct hl_device *hdev)
 void hl_debugfs_remove_device(struct hl_device *hdev)
 {
 	struct hl_dbg_device_entry *entry = &hdev->hl_debugfs;
+	int i;
 
 	debugfs_remove_recursive(entry->root);
 
@@ -1304,6 +1443,9 @@ void hl_debugfs_remove_device(struct hl_device *hdev)
 
 	vfree(entry->blob_desc.data);
 
+	for (i = 0; i < ARRAY_SIZE(entry->state_dump); ++i)
+		vfree(entry->state_dump[i]);
+
 	kfree(entry->entry_arr);
 }
 
@@ -1416,6 +1558,28 @@ void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx)
 	spin_unlock(&dev_entry->ctx_mem_hash_spinlock);
 }
 
+/**
+ * hl_debugfs_set_state_dump - register state dump making it accessible via
+ *                             debugfs
+ * @hdev: pointer to the device structure
+ * @data: the actual dump data
+ * @length: the length of the data
+ */
+void hl_debugfs_set_state_dump(struct hl_device *hdev, char *data,
+					unsigned long length)
+{
+	struct hl_dbg_device_entry *dev_entry = &hdev->hl_debugfs;
+
+	down_write(&dev_entry->state_dump_sem);
+
+	dev_entry->state_dump_head = (dev_entry->state_dump_head + 1) %
+					ARRAY_SIZE(dev_entry->state_dump);
+	vfree(dev_entry->state_dump[dev_entry->state_dump_head]);
+	dev_entry->state_dump[dev_entry->state_dump_head] = data;
+
+	up_write(&dev_entry->state_dump_sem);
+}
+
 void __init hl_debugfs_init(void)
 {
 	hl_debug_root = debugfs_create_dir("habanalabs", NULL);
diff --git a/drivers/misc/habanalabs/common/device.c b/drivers/misc/habanalabs/common/device.c
index ff4cbde289c0..97c7c86580e6 100644
--- a/drivers/misc/habanalabs/common/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -7,11 +7,11 @@
 
 #define pr_fmt(fmt)			"habanalabs: " fmt
 
+#include <uapi/misc/habanalabs.h>
 #include "habanalabs.h"
 
 #include <linux/pci.h>
 #include <linux/hwmon.h>
-#include <uapi/misc/habanalabs.h>
 
 enum hl_device_status hl_device_status(struct hl_device *hdev)
 {
@@ -23,6 +23,8 @@ enum hl_device_status hl_device_status(struct hl_device *hdev)
 		status = HL_DEVICE_STATUS_NEEDS_RESET;
 	else if (hdev->disabled)
 		status = HL_DEVICE_STATUS_MALFUNCTION;
+	else if (!hdev->init_done)
+		status = HL_DEVICE_STATUS_IN_DEVICE_CREATION;
 	else
 		status = HL_DEVICE_STATUS_OPERATIONAL;
 
@@ -44,6 +46,7 @@ bool hl_device_operational(struct hl_device *hdev,
 	case HL_DEVICE_STATUS_NEEDS_RESET:
 		return false;
 	case HL_DEVICE_STATUS_OPERATIONAL:
+	case HL_DEVICE_STATUS_IN_DEVICE_CREATION:
 	default:
 		return true;
 	}
@@ -129,8 +132,8 @@ static int hl_device_release(struct inode *inode, struct file *filp)
 	hl_ctx_mgr_fini(hdev, &hpriv->ctx_mgr);
 
 	if (!hl_hpriv_put(hpriv))
-		dev_warn(hdev->dev,
-			"Device is still in use because there are live CS and/or memory mappings\n");
+		dev_notice(hdev->dev,
+			"User process closed FD but device still in use\n");
 
 	hdev->last_open_session_duration_jif =
 		jiffies - hdev->last_successful_open_jif;
@@ -308,9 +311,15 @@ static void device_hard_reset_pending(struct work_struct *work)
 		container_of(work, struct hl_device_reset_work,
 				reset_work.work);
 	struct hl_device *hdev = device_reset_work->hdev;
+	u32 flags;
 	int rc;
 
-	rc = hl_device_reset(hdev, HL_RESET_HARD | HL_RESET_FROM_RESET_THREAD);
+	flags = HL_RESET_HARD | HL_RESET_FROM_RESET_THREAD;
+
+	if (device_reset_work->fw_reset)
+		flags |= HL_RESET_FW;
+
+	rc = hl_device_reset(hdev, flags);
 	if ((rc == -EBUSY) && !hdev->device_fini_pending) {
 		dev_info(hdev->dev,
 			"Could not reset device. will try again in %u seconds",
@@ -682,6 +691,44 @@ out:
 	return rc;
 }
 
+static void take_release_locks(struct hl_device *hdev)
+{
+	/* Flush anyone that is inside the critical section of enqueue
+	 * jobs to the H/W
+	 */
+	hdev->asic_funcs->hw_queues_lock(hdev);
+	hdev->asic_funcs->hw_queues_unlock(hdev);
+
+	/* Flush processes that are sending message to CPU */
+	mutex_lock(&hdev->send_cpu_message_lock);
+	mutex_unlock(&hdev->send_cpu_message_lock);
+
+	/* Flush anyone that is inside device open */
+	mutex_lock(&hdev->fpriv_list_lock);
+	mutex_unlock(&hdev->fpriv_list_lock);
+}
+
+static void cleanup_resources(struct hl_device *hdev, bool hard_reset, bool fw_reset)
+{
+	if (hard_reset)
+		device_late_fini(hdev);
+
+	/*
+	 * Halt the engines and disable interrupts so we won't get any more
+	 * completions from H/W and we won't have any accesses from the
+	 * H/W to the host machine
+	 */
+	hdev->asic_funcs->halt_engines(hdev, hard_reset, fw_reset);
+
+	/* Go over all the queues, release all CS and their jobs */
+	hl_cs_rollback_all(hdev);
+
+	/* Release all pending user interrupts, each pending user interrupt
+	 * holds a reference to user context
+	 */
+	hl_release_pending_user_interrupts(hdev);
+}
+
 /*
  * hl_device_suspend - initiate device suspend
  *
@@ -707,16 +754,7 @@ int hl_device_suspend(struct hl_device *hdev)
 	/* This blocks all other stuff that is not blocked by in_reset */
 	hdev->disabled = true;
 
-	/*
-	 * Flush anyone that is inside the critical section of enqueue
-	 * jobs to the H/W
-	 */
-	hdev->asic_funcs->hw_queues_lock(hdev);
-	hdev->asic_funcs->hw_queues_unlock(hdev);
-
-	/* Flush processes that are sending message to CPU */
-	mutex_lock(&hdev->send_cpu_message_lock);
-	mutex_unlock(&hdev->send_cpu_message_lock);
+	take_release_locks(hdev);
 
 	rc = hdev->asic_funcs->suspend(hdev);
 	if (rc)
@@ -819,6 +857,11 @@ static int device_kill_open_processes(struct hl_device *hdev, u32 timeout)
 			usleep_range(1000, 10000);
 
 			put_task_struct(task);
+		} else {
+			dev_warn(hdev->dev,
+				"Can't get task struct for PID so giving up on killing process\n");
+			mutex_unlock(&hdev->fpriv_list_lock);
+			return -ETIME;
 		}
 	}
 
@@ -885,7 +928,7 @@ static void device_disable_open_processes(struct hl_device *hdev)
 int hl_device_reset(struct hl_device *hdev, u32 flags)
 {
 	u64 idle_mask[HL_BUSY_ENGINES_MASK_EXT_SIZE] = {0};
-	bool hard_reset, from_hard_reset_thread, hard_instead_soft = false;
+	bool hard_reset, from_hard_reset_thread, fw_reset, hard_instead_soft = false;
 	int i, rc;
 
 	if (!hdev->init_done) {
@@ -894,8 +937,9 @@ int hl_device_reset(struct hl_device *hdev, u32 flags)
 		return 0;
 	}
 
-	hard_reset = (flags & HL_RESET_HARD) != 0;
-	from_hard_reset_thread = (flags & HL_RESET_FROM_RESET_THREAD) != 0;
+	hard_reset = !!(flags & HL_RESET_HARD);
+	from_hard_reset_thread = !!(flags & HL_RESET_FROM_RESET_THREAD);
+	fw_reset = !!(flags & HL_RESET_FW);
 
 	if (!hard_reset && !hdev->supports_soft_reset) {
 		hard_instead_soft = true;
@@ -947,11 +991,13 @@ do_reset:
 		else
 			hdev->curr_reset_cause = HL_RESET_CAUSE_UNKNOWN;
 
-		/*
-		 * if reset is due to heartbeat, device CPU is no responsive in
-		 * which case no point sending PCI disable message to it
+		/* If reset is due to heartbeat, device CPU is no responsive in
+		 * which case no point sending PCI disable message to it.
+		 *
+		 * If F/W is performing the reset, no need to send it a message to disable
+		 * PCI access
 		 */
-		if (hard_reset && !(flags & HL_RESET_HEARTBEAT)) {
+		if (hard_reset && !(flags & (HL_RESET_HEARTBEAT | HL_RESET_FW))) {
 			/* Disable PCI access from device F/W so he won't send
 			 * us additional interrupts. We disable MSI/MSI-X at
 			 * the halt_engines function and we can't have the F/W
@@ -970,15 +1016,7 @@ do_reset:
 		/* This also blocks future CS/VM/JOB completion operations */
 		hdev->disabled = true;
 
-		/* Flush anyone that is inside the critical section of enqueue
-		 * jobs to the H/W
-		 */
-		hdev->asic_funcs->hw_queues_lock(hdev);
-		hdev->asic_funcs->hw_queues_unlock(hdev);
-
-		/* Flush anyone that is inside device open */
-		mutex_lock(&hdev->fpriv_list_lock);
-		mutex_unlock(&hdev->fpriv_list_lock);
+		take_release_locks(hdev);
 
 		dev_err(hdev->dev, "Going to RESET device!\n");
 	}
@@ -989,6 +1027,8 @@ again:
 
 		hdev->process_kill_trial_cnt = 0;
 
+		hdev->device_reset_work.fw_reset = fw_reset;
+
 		/*
 		 * Because the reset function can't run from heartbeat work,
 		 * we need to call the reset function from a dedicated work.
@@ -999,31 +1039,7 @@ again:
 		return 0;
 	}
 
-	if (hard_reset) {
-		device_late_fini(hdev);
-
-		/*
-		 * Now that the heartbeat thread is closed, flush processes
-		 * which are sending messages to CPU
-		 */
-		mutex_lock(&hdev->send_cpu_message_lock);
-		mutex_unlock(&hdev->send_cpu_message_lock);
-	}
-
-	/*
-	 * Halt the engines and disable interrupts so we won't get any more
-	 * completions from H/W and we won't have any accesses from the
-	 * H/W to the host machine
-	 */
-	hdev->asic_funcs->halt_engines(hdev, hard_reset);
-
-	/* Go over all the queues, release all CS and their jobs */
-	hl_cs_rollback_all(hdev);
-
-	/* Release all pending user interrupts, each pending user interrupt
-	 * holds a reference to user context
-	 */
-	hl_release_pending_user_interrupts(hdev);
+	cleanup_resources(hdev, hard_reset, fw_reset);
 
 kill_processes:
 	if (hard_reset) {
@@ -1057,12 +1073,15 @@ kill_processes:
 	}
 
 	/* Reset the H/W. It will be in idle state after this returns */
-	hdev->asic_funcs->hw_fini(hdev, hard_reset);
+	hdev->asic_funcs->hw_fini(hdev, hard_reset, fw_reset);
 
 	if (hard_reset) {
+		hdev->fw_loader.linux_loaded = false;
+
 		/* Release kernel context */
 		if (hdev->kernel_ctx && hl_ctx_put(hdev->kernel_ctx) == 1)
 			hdev->kernel_ctx = NULL;
+
 		hl_vm_fini(hdev);
 		hl_mmu_fini(hdev);
 		hl_eq_reset(hdev, &hdev->event_queue);
@@ -1292,6 +1311,10 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
 	if (rc)
 		goto user_interrupts_fini;
 
+
+	/* initialize completion structure for multi CS wait */
+	hl_multi_cs_completion_init(hdev);
+
 	/*
 	 * Initialize the H/W queues. Must be done before hw_init, because
 	 * there the addresses of the kernel queue are being written to the
@@ -1361,6 +1384,8 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
 
 	hdev->compute_ctx = NULL;
 
+	hdev->asic_funcs->state_dump_init(hdev);
+
 	hl_debugfs_add_device(hdev);
 
 	/* debugfs nodes are created in hl_ctx_init so it must be called after
@@ -1567,31 +1592,13 @@ void hl_device_fini(struct hl_device *hdev)
 	/* Mark device as disabled */
 	hdev->disabled = true;
 
-	/* Flush anyone that is inside the critical section of enqueue
-	 * jobs to the H/W
-	 */
-	hdev->asic_funcs->hw_queues_lock(hdev);
-	hdev->asic_funcs->hw_queues_unlock(hdev);
-
-	/* Flush anyone that is inside device open */
-	mutex_lock(&hdev->fpriv_list_lock);
-	mutex_unlock(&hdev->fpriv_list_lock);
+	take_release_locks(hdev);
 
 	hdev->hard_reset_pending = true;
 
 	hl_hwmon_fini(hdev);
 
-	device_late_fini(hdev);
-
-	/*
-	 * Halt the engines and disable interrupts so we won't get any more
-	 * completions from H/W and we won't have any accesses from the
-	 * H/W to the host machine
-	 */
-	hdev->asic_funcs->halt_engines(hdev, true);
-
-	/* Go over all the queues, release all CS and their jobs */
-	hl_cs_rollback_all(hdev);
+	cleanup_resources(hdev, true, false);
 
 	/* Kill processes here after CS rollback. This is because the process
 	 * can't really exit until all its CSs are done, which is what we
@@ -1610,7 +1617,9 @@ void hl_device_fini(struct hl_device *hdev)
 	hl_cb_pool_fini(hdev);
 
 	/* Reset the H/W. It will be in idle state after this returns */
-	hdev->asic_funcs->hw_fini(hdev, true);
+	hdev->asic_funcs->hw_fini(hdev, true, false);
+
+	hdev->fw_loader.linux_loaded = false;
 
 	/* Release kernel context */
 	if ((hdev->kernel_ctx) && (hl_ctx_put(hdev->kernel_ctx) != 1))
diff --git a/drivers/misc/habanalabs/common/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index 2e4d04ec6b53..8d2568c63f19 100644
--- a/drivers/misc/habanalabs/common/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -1,7 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 /*
- * Copyright 2016-2019 HabanaLabs, Ltd.
+ * Copyright 2016-2021 HabanaLabs, Ltd.
  * All Rights Reserved.
  */
 
@@ -240,11 +240,15 @@ int hl_fw_send_cpu_message(struct hl_device *hdev, u32 hw_queue_id, u32 *msg,
 	/* set fence to a non valid value */
 	pkt->fence = cpu_to_le32(UINT_MAX);
 
-	rc = hl_hw_queue_send_cb_no_cmpl(hdev, hw_queue_id, len, pkt_dma_addr);
-	if (rc) {
-		dev_err(hdev->dev, "Failed to send CB on CPU PQ (%d)\n", rc);
-		goto out;
-	}
+	/*
+	 * The CPU queue is a synchronous queue with an effective depth of
+	 * a single entry (although it is allocated with room for multiple
+	 * entries). We lock on it using 'send_cpu_message_lock' which
+	 * serializes accesses to the CPU queue.
+	 * Which means that we don't need to lock the access to the entire H/W
+	 * queues module when submitting a JOB to the CPU queue.
+	 */
+	hl_hw_queue_submit_bd(hdev, queue, 0, len, pkt_dma_addr);
 
 	if (prop->fw_app_cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN)
 		expected_ack_val = queue->pi;
@@ -663,17 +667,15 @@ int hl_fw_cpucp_info_get(struct hl_device *hdev,
 	hdev->event_queue.check_eqe_index = false;
 
 	/* Read FW application security bits again */
-	if (hdev->asic_prop.fw_cpu_boot_dev_sts0_valid) {
-		hdev->asic_prop.fw_app_cpu_boot_dev_sts0 =
-						RREG32(sts_boot_dev_sts0_reg);
-		if (hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
+	if (prop->fw_cpu_boot_dev_sts0_valid) {
+		prop->fw_app_cpu_boot_dev_sts0 = RREG32(sts_boot_dev_sts0_reg);
+		if (prop->fw_app_cpu_boot_dev_sts0 &
 				CPU_BOOT_DEV_STS0_EQ_INDEX_EN)
 			hdev->event_queue.check_eqe_index = true;
 	}
 
-	if (hdev->asic_prop.fw_cpu_boot_dev_sts1_valid)
-		hdev->asic_prop.fw_app_cpu_boot_dev_sts1 =
-						RREG32(sts_boot_dev_sts1_reg);
+	if (prop->fw_cpu_boot_dev_sts1_valid)
+		prop->fw_app_cpu_boot_dev_sts1 = RREG32(sts_boot_dev_sts1_reg);
 
 out:
 	hdev->asic_funcs->cpu_accessible_dma_pool_free(hdev,
@@ -1008,6 +1010,11 @@ void hl_fw_ask_halt_machine_without_linux(struct hl_device *hdev)
 	} else {
 		WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_GOTO_WFE);
 		msleep(static_loader->cpu_reset_wait_msec);
+
+		/* Must clear this register in order to prevent preboot
+		 * from reading WFE after reboot
+		 */
+		WREG32(static_loader->kmd_msg_to_cpu_reg, KMD_MSG_NA);
 	}
 
 	hdev->device_cpu_is_halted = true;
@@ -1055,6 +1062,10 @@ static void detect_cpu_boot_status(struct hl_device *hdev, u32 status)
 		dev_err(hdev->dev,
 			"Device boot progress - Thermal Sensor initialization failed\n");
 		break;
+	case CPU_BOOT_STATUS_SECURITY_READY:
+		dev_err(hdev->dev,
+			"Device boot progress - Stuck in preboot after security initialization\n");
+		break;
 	default:
 		dev_err(hdev->dev,
 			"Device boot progress - Invalid status code %d\n",
@@ -1238,11 +1249,6 @@ static void hl_fw_preboot_update_state(struct hl_device *hdev)
 	 *               b. Check whether hard reset is done by boot cpu
 	 * 3. FW application - a. Fetch fw application security status
 	 *                     b. Check whether hard reset is done by fw app
-	 *
-	 * Preboot:
-	 * Check security status bit (CPU_BOOT_DEV_STS0_ENABLED). If set, then-
-	 * check security enabled bit (CPU_BOOT_DEV_STS0_SECURITY_EN)
-	 * If set, then mark GIC controller to be disabled.
 	 */
 	prop->hard_reset_done_by_fw =
 		!!(cpu_boot_dev_sts0 & CPU_BOOT_DEV_STS0_FW_HARD_RST_EN);
@@ -1953,8 +1959,8 @@ static void hl_fw_dynamic_update_linux_interrupt_if(struct hl_device *hdev)
 	if (!hdev->asic_prop.gic_interrupts_enable &&
 			!(hdev->asic_prop.fw_app_cpu_boot_dev_sts0 &
 				CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN)) {
-		dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_irq_ctrl;
-		dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_irq_ctrl;
+		dyn_regs->gic_host_halt_irq = dyn_regs->gic_host_pi_upd_irq;
+		dyn_regs->gic_host_ints_irq = dyn_regs->gic_host_pi_upd_irq;
 
 		dev_warn(hdev->dev,
 			"Using a single interrupt interface towards cpucp");
@@ -2122,8 +2128,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,
 
 	/* Read FW application security bits */
 	if (prop->fw_cpu_boot_dev_sts0_valid) {
-		prop->fw_app_cpu_boot_dev_sts0 =
-				RREG32(cpu_boot_dev_sts0_reg);
+		prop->fw_app_cpu_boot_dev_sts0 = RREG32(cpu_boot_dev_sts0_reg);
 
 		if (prop->fw_app_cpu_boot_dev_sts0 &
 				CPU_BOOT_DEV_STS0_FW_HARD_RST_EN)
@@ -2143,8 +2148,7 @@ static void hl_fw_linux_update_state(struct hl_device *hdev,
 	}
 
 	if (prop->fw_cpu_boot_dev_sts1_valid) {
-		prop->fw_app_cpu_boot_dev_sts1 =
-				RREG32(cpu_boot_dev_sts1_reg);
+		prop->fw_app_cpu_boot_dev_sts1 = RREG32(cpu_boot_dev_sts1_reg);
 
 		dev_dbg(hdev->dev,
 			"Firmware application CPU status1 %#x\n",
@@ -2235,6 +2239,10 @@ static int hl_fw_dynamic_init_cpu(struct hl_device *hdev,
 	dev_info(hdev->dev,
 		"Loading firmware to device, may take some time...\n");
 
+	/*
+	 * In this stage, "cpu_dyn_regs" contains only LKD's hard coded values!
+	 * It will be updated from FW after hl_fw_dynamic_request_descriptor().
+	 */
 	dyn_regs = &fw_loader->dynamic_loader.comm_desc.cpu_dyn_regs;
 
 	rc = hl_fw_dynamic_send_protocol_cmd(hdev, fw_loader, COMMS_RST_STATE,
diff --git a/drivers/misc/habanalabs/common/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 6b3cdd7e068a..bebebcb163ee 100644
--- a/drivers/misc/habanalabs/common/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -20,6 +20,7 @@
 #include <linux/scatterlist.h>
 #include <linux/hashtable.h>
 #include <linux/debugfs.h>
+#include <linux/rwsem.h>
 #include <linux/bitfield.h>
 #include <linux/genalloc.h>
 #include <linux/sched/signal.h>
@@ -65,6 +66,11 @@
 
 #define HL_COMMON_USER_INTERRUPT_ID	0xFFF
 
+#define HL_STATE_DUMP_HIST_LEN		5
+
+#define OBJ_NAMES_HASH_TABLE_BITS	7 /* 1 << 7 buckets */
+#define SYNC_TO_ENGINE_HASH_TABLE_BITS	7 /* 1 << 7 buckets */
+
 /* Memory */
 #define MEM_HASH_TABLE_BITS		7 /* 1 << 7 buckets */
 
@@ -122,12 +128,17 @@ enum hl_mmu_page_table_location {
  *
  * - HL_RESET_DEVICE_RELEASE
  *       Set if reset is due to device release
+ *
+ * - HL_RESET_FW
+ *       F/W will perform the reset. No need to ask it to reset the device. This is relevant
+ *       only when running with secured f/w
  */
 #define HL_RESET_HARD			(1 << 0)
 #define HL_RESET_FROM_RESET_THREAD	(1 << 1)
 #define HL_RESET_HEARTBEAT		(1 << 2)
 #define HL_RESET_TDR			(1 << 3)
 #define HL_RESET_DEVICE_RELEASE		(1 << 4)
+#define HL_RESET_FW			(1 << 5)
 
 #define HL_MAX_SOBS_PER_MONITOR	8
 
@@ -236,7 +247,9 @@ enum hl_cs_type {
 	CS_TYPE_DEFAULT,
 	CS_TYPE_SIGNAL,
 	CS_TYPE_WAIT,
-	CS_TYPE_COLLECTIVE_WAIT
+	CS_TYPE_COLLECTIVE_WAIT,
+	CS_RESERVE_SIGNALS,
+	CS_UNRESERVE_SIGNALS
 };
 
 /*
@@ -281,13 +294,17 @@ enum queue_cb_alloc_flags {
  * @hdev: habanalabs device structure.
  * @kref: refcount of this SOB. The SOB will reset once the refcount is zero.
  * @sob_id: id of this SOB.
+ * @sob_addr: the sob offset from the base address.
  * @q_idx: the H/W queue that uses this SOB.
+ * @need_reset: reset indication set when switching to the other sob.
  */
 struct hl_hw_sob {
 	struct hl_device	*hdev;
 	struct kref		kref;
 	u32			sob_id;
+	u32			sob_addr;
 	u32			q_idx;
+	bool			need_reset;
 };
 
 enum hl_collective_mode {
@@ -317,11 +334,11 @@ struct hw_queue_properties {
 };
 
 /**
- * enum vm_type_t - virtual memory mapping request information.
+ * enum vm_type - virtual memory mapping request information.
  * @VM_TYPE_USERPTR: mapping of user memory to device virtual address.
  * @VM_TYPE_PHYS_PACK: mapping of DRAM memory to device virtual address.
  */
-enum vm_type_t {
+enum vm_type {
 	VM_TYPE_USERPTR = 0x1,
 	VM_TYPE_PHYS_PACK = 0x2
 };
@@ -382,6 +399,16 @@ struct hl_mmu_properties {
 };
 
 /**
+ * struct hl_hints_range - hint addresses reserved va range.
+ * @start_addr: start address of the va range.
+ * @end_addr: end address of the va range.
+ */
+struct hl_hints_range {
+	u64 start_addr;
+	u64 end_addr;
+};
+
+/**
  * struct asic_fixed_properties - ASIC specific immutable properties.
  * @hw_queues_props: H/W queues properties.
  * @cpucp_info: received various information from CPU-CP regarding the H/W, e.g.
@@ -392,6 +419,10 @@ struct hl_mmu_properties {
  * @pmmu: PCI (host) MMU address translation properties.
  * @pmmu_huge: PCI (host) MMU address translation properties for memory
  *              allocated with huge pages.
+ * @hints_dram_reserved_va_range: dram hint addresses reserved range.
+ * @hints_host_reserved_va_range: host hint addresses reserved range.
+ * @hints_host_hpage_reserved_va_range: host huge page hint addresses reserved
+ *                                      range.
  * @sram_base_address: SRAM physical start address.
  * @sram_end_address: SRAM physical end address.
  * @sram_user_base_address - SRAM physical start address for user access.
@@ -412,6 +443,10 @@ struct hl_mmu_properties {
  *                    to the device's MMU.
  * @cb_va_end_addr: virtual end address of command buffers which are mapped to
  *                  the device's MMU.
+ * @dram_hints_align_mask: dram va hint addresses alignment mask which is used
+ *                  for hints validity check.
+ * device_dma_offset_for_host_access: the offset to add to host DMA addresses
+ *                                    to enable the device to access them.
  * @mmu_pgt_size: MMU page tables total size.
  * @mmu_pte_size: PTE size in MMU page tables.
  * @mmu_hop_table_size: MMU hop table size.
@@ -459,6 +494,8 @@ struct hl_mmu_properties {
  *                                       reserved for the user
  * @first_available_cq: first available CQ for the user.
  * @user_interrupt_count: number of user interrupts.
+ * @server_type: Server type that the ASIC is currently installed in.
+ *               The value is according to enum hl_server_type in uapi file.
  * @tpc_enabled_mask: which TPCs are enabled.
  * @completion_queues_count: number of completion queues.
  * @fw_security_enabled: true if security measures are enabled in firmware,
@@ -470,6 +507,7 @@ struct hl_mmu_properties {
  * @dram_supports_virtual_memory: is there an MMU towards the DRAM
  * @hard_reset_done_by_fw: true if firmware is handling hard reset flow
  * @num_functional_hbms: number of functional HBMs in each DCORE.
+ * @hints_range_reservation: device support hint addresses range reservation.
  * @iatu_done_by_fw: true if iATU configuration is being done by FW.
  * @dynamic_fw_load: is dynamic FW load is supported.
  * @gic_interrupts_enable: true if FW is not blocking GIC controller,
@@ -483,6 +521,9 @@ struct asic_fixed_properties {
 	struct hl_mmu_properties	dmmu;
 	struct hl_mmu_properties	pmmu;
 	struct hl_mmu_properties	pmmu_huge;
+	struct hl_hints_range		hints_dram_reserved_va_range;
+	struct hl_hints_range		hints_host_reserved_va_range;
+	struct hl_hints_range		hints_host_hpage_reserved_va_range;
 	u64				sram_base_address;
 	u64				sram_end_address;
 	u64				sram_user_base_address;
@@ -500,6 +541,8 @@ struct asic_fixed_properties {
 	u64				mmu_dram_default_page_addr;
 	u64				cb_va_start_addr;
 	u64				cb_va_end_addr;
+	u64				dram_hints_align_mask;
+	u64				device_dma_offset_for_host_access;
 	u32				mmu_pgt_size;
 	u32				mmu_pte_size;
 	u32				mmu_hop_table_size;
@@ -534,6 +577,7 @@ struct asic_fixed_properties {
 	u16				first_available_user_msix_interrupt;
 	u16				first_available_cq[HL_MAX_DCORES];
 	u16				user_interrupt_count;
+	u16				server_type;
 	u8				tpc_enabled_mask;
 	u8				completion_queues_count;
 	u8				fw_security_enabled;
@@ -542,6 +586,7 @@ struct asic_fixed_properties {
 	u8				dram_supports_virtual_memory;
 	u8				hard_reset_done_by_fw;
 	u8				num_functional_hbms;
+	u8				hints_range_reservation;
 	u8				iatu_done_by_fw;
 	u8				dynamic_fw_load;
 	u8				gic_interrupts_enable;
@@ -552,40 +597,45 @@ struct asic_fixed_properties {
  * @completion: fence is implemented using completion
  * @refcount: refcount for this fence
  * @cs_sequence: sequence of the corresponding command submission
+ * @stream_master_qid_map: streams masters QID bitmap to represent all streams
+ *                         masters QIDs that multi cs is waiting on
  * @error: mark this fence with error
  * @timestamp: timestamp upon completion
- *
  */
 struct hl_fence {
 	struct completion	completion;
 	struct kref		refcount;
 	u64			cs_sequence;
+	u32			stream_master_qid_map;
 	int			error;
 	ktime_t			timestamp;
 };
 
 /**
  * struct hl_cs_compl - command submission completion object.
- * @sob_reset_work: workqueue object to run SOB reset flow.
  * @base_fence: hl fence object.
  * @lock: spinlock to protect fence.
  * @hdev: habanalabs device structure.
  * @hw_sob: the H/W SOB used in this signal/wait CS.
+ * @encaps_sig_hdl: encaps signals hanlder.
  * @cs_seq: command submission sequence number.
  * @type: type of the CS - signal/wait.
  * @sob_val: the SOB value that is used in this signal/wait CS.
  * @sob_group: the SOB group that is used in this collective wait CS.
+ * @encaps_signals: indication whether it's a completion object of cs with
+ * encaps signals or not.
  */
 struct hl_cs_compl {
-	struct work_struct	sob_reset_work;
 	struct hl_fence		base_fence;
 	spinlock_t		lock;
 	struct hl_device	*hdev;
 	struct hl_hw_sob	*hw_sob;
+	struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
 	u64			cs_seq;
 	enum hl_cs_type		type;
 	u16			sob_val;
 	u16			sob_group;
+	bool			encaps_signals;
 };
 
 /*
@@ -698,6 +748,17 @@ struct hl_sync_stream_properties {
 };
 
 /**
+ * struct hl_encaps_signals_mgr - describes sync stream encapsulated signals
+ * handlers manager
+ * @lock: protects handles.
+ * @handles: an idr to hold all encapsulated signals handles.
+ */
+struct hl_encaps_signals_mgr {
+	spinlock_t		lock;
+	struct idr		handles;
+};
+
+/**
  * struct hl_hw_queue - describes a H/W transport queue.
  * @shadow_queue: pointer to a shadow queue that holds pointers to jobs.
  * @sync_stream_prop: sync stream queue properties
@@ -875,7 +936,7 @@ struct pci_mem_region {
 	u64 region_base;
 	u64 region_size;
 	u64 bar_size;
-	u32 offset_in_bar;
+	u64 offset_in_bar;
 	u8 bar_id;
 	u8 used;
 };
@@ -996,7 +1057,7 @@ struct fw_load_mgr {
  *                hw_fini and before CS rollback.
  * @suspend: handles IP specific H/W or SW changes for suspend.
  * @resume: handles IP specific H/W or SW changes for resume.
- * @cb_mmap: maps a CB.
+ * @mmap: maps a memory.
  * @ring_doorbell: increment PI on a given QMAN.
  * @pqe_write: Write the PQ entry to the PQ. This is ASIC-specific
  *             function because the PQs are located in different memory areas
@@ -1101,6 +1162,10 @@ struct fw_load_mgr {
  *                         generic f/w compatible PLL Indexes
  * @init_firmware_loader: initialize data for FW loader.
  * @init_cpu_scrambler_dram: Enable CPU specific DRAM scrambling
+ * @state_dump_init: initialize constants required for state dump
+ * @get_sob_addr: get SOB base address offset.
+ * @set_pci_memory_regions: setting properties of PCI memory regions
+ * @get_stream_master_qid_arr: get pointer to stream masters QID array
  */
 struct hl_asic_funcs {
 	int (*early_init)(struct hl_device *hdev);
@@ -1110,11 +1175,11 @@ struct hl_asic_funcs {
 	int (*sw_init)(struct hl_device *hdev);
 	int (*sw_fini)(struct hl_device *hdev);
 	int (*hw_init)(struct hl_device *hdev);
-	void (*hw_fini)(struct hl_device *hdev, bool hard_reset);
-	void (*halt_engines)(struct hl_device *hdev, bool hard_reset);
+	void (*hw_fini)(struct hl_device *hdev, bool hard_reset, bool fw_reset);
+	void (*halt_engines)(struct hl_device *hdev, bool hard_reset, bool fw_reset);
 	int (*suspend)(struct hl_device *hdev);
 	int (*resume)(struct hl_device *hdev);
-	int (*cb_mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
+	int (*mmap)(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size);
 	void (*ring_doorbell)(struct hl_device *hdev, u32 hw_queue_id, u32 pi);
 	void (*pqe_write)(struct hl_device *hdev, __le64 *pqe,
@@ -1210,10 +1275,11 @@ struct hl_asic_funcs {
 	void (*reset_sob_group)(struct hl_device *hdev, u16 sob_group);
 	void (*set_dma_mask_from_fw)(struct hl_device *hdev);
 	u64 (*get_device_time)(struct hl_device *hdev);
-	void (*collective_wait_init_cs)(struct hl_cs *cs);
+	int (*collective_wait_init_cs)(struct hl_cs *cs);
 	int (*collective_wait_create_jobs)(struct hl_device *hdev,
-			struct hl_ctx *ctx, struct hl_cs *cs, u32 wait_queue_id,
-			u32 collective_engine_id);
+			struct hl_ctx *ctx, struct hl_cs *cs,
+			u32 wait_queue_id, u32 collective_engine_id,
+			u32 encaps_signal_offset);
 	u64 (*scramble_addr)(struct hl_device *hdev, u64 addr);
 	u64 (*descramble_addr)(struct hl_device *hdev, u64 addr);
 	void (*ack_protection_bits_errors)(struct hl_device *hdev);
@@ -1226,6 +1292,10 @@ struct hl_asic_funcs {
 	int (*map_pll_idx_to_fw_idx)(u32 pll_idx);
 	void (*init_firmware_loader)(struct hl_device *hdev);
 	void (*init_cpu_scrambler_dram)(struct hl_device *hdev);
+	void (*state_dump_init)(struct hl_device *hdev);
+	u32 (*get_sob_addr)(struct hl_device *hdev, u32 sob_id);
+	void (*set_pci_memory_regions)(struct hl_device *hdev);
+	u32* (*get_stream_master_qid_arr)(void);
 };
 
 
@@ -1283,20 +1353,6 @@ struct hl_cs_counters_atomic {
 };
 
 /**
- * struct hl_pending_cb - pending command buffer structure
- * @cb_node: cb node in pending cb list
- * @cb: command buffer to send in next submission
- * @cb_size: command buffer size
- * @hw_queue_id: destination queue id
- */
-struct hl_pending_cb {
-	struct list_head	cb_node;
-	struct hl_cb		*cb;
-	u32			cb_size;
-	u32			hw_queue_id;
-};
-
-/**
  * struct hl_ctx - user/kernel context.
  * @mem_hash: holds mapping from virtual address to virtual memory area
  *		descriptor (hl_vm_phys_pg_list or hl_userptr).
@@ -1312,28 +1368,21 @@ struct hl_pending_cb {
  *            MMU hash or walking the PGT requires talking this lock.
  * @hw_block_list_lock: protects the HW block memory list.
  * @debugfs_list: node in debugfs list of contexts.
- * pending_cb_list: list of pending command buffers waiting to be sent upon
- *                  next user command submission context.
  * @hw_block_mem_list: list of HW block virtual mapped addresses.
  * @cs_counters: context command submission counters.
  * @cb_va_pool: device VA pool for command buffers which are mapped to the
  *              device's MMU.
+ * @sig_mgr: encaps signals handle manager.
  * @cs_sequence: sequence number for CS. Value is assigned to a CS and passed
  *			to user so user could inquire about CS. It is used as
  *			index to cs_pending array.
  * @dram_default_hops: array that holds all hops addresses needed for default
  *                     DRAM mapping.
- * @pending_cb_lock: spinlock to protect pending cb list
  * @cs_lock: spinlock to protect cs_sequence.
  * @dram_phys_mem: amount of used physical DRAM memory by this context.
  * @thread_ctx_switch_token: token to prevent multiple threads of the same
  *				context	from running the context switch phase.
  *				Only a single thread should run it.
- * @thread_pending_cb_token: token to prevent multiple threads from processing
- *				the pending CB list. Only a single thread should
- *				process the list since it is protected by a
- *				spinlock and we don't want to halt the entire
- *				command submission sequence.
  * @thread_ctx_switch_wait_token: token to prevent the threads that didn't run
  *				the context switch phase from moving to their
  *				execution phase before the context switch phase
@@ -1353,17 +1402,15 @@ struct hl_ctx {
 	struct mutex			mmu_lock;
 	struct mutex			hw_block_list_lock;
 	struct list_head		debugfs_list;
-	struct list_head		pending_cb_list;
 	struct list_head		hw_block_mem_list;
 	struct hl_cs_counters_atomic	cs_counters;
 	struct gen_pool			*cb_va_pool;
+	struct hl_encaps_signals_mgr	sig_mgr;
 	u64				cs_sequence;
 	u64				*dram_default_hops;
-	spinlock_t			pending_cb_lock;
 	spinlock_t			cs_lock;
 	atomic64_t			dram_phys_mem;
 	atomic_t			thread_ctx_switch_token;
-	atomic_t			thread_pending_cb_token;
 	u32				thread_ctx_switch_wait_token;
 	u32				asid;
 	u32				handle;
@@ -1394,20 +1441,22 @@ struct hl_ctx_mgr {
  * @sgt: pointer to the scatter-gather table that holds the pages.
  * @dir: for DMA unmapping, the direction must be supplied, so save it.
  * @debugfs_list: node in debugfs list of command submissions.
+ * @pid: the pid of the user process owning the memory
  * @addr: user-space virtual address of the start of the memory area.
  * @size: size of the memory area to pin & map.
  * @dma_mapped: true if the SG was mapped to DMA addresses, false otherwise.
  */
 struct hl_userptr {
-	enum vm_type_t		vm_type; /* must be first */
+	enum vm_type		vm_type; /* must be first */
 	struct list_head	job_node;
 	struct page		**pages;
 	unsigned int		npages;
 	struct sg_table		*sgt;
 	enum dma_data_direction dir;
 	struct list_head	debugfs_list;
+	pid_t			pid;
 	u64			addr;
-	u32			size;
+	u64			size;
 	u8			dma_mapped;
 };
 
@@ -1426,12 +1475,14 @@ struct hl_userptr {
  * @mirror_node : node in device mirror list of command submissions.
  * @staged_cs_node: node in the staged cs list.
  * @debugfs_list: node in debugfs list of command submissions.
+ * @encaps_sig_hdl: holds the encaps signals handle.
  * @sequence: the sequence number of this CS.
  * @staged_sequence: the sequence of the staged submission this CS is part of,
  *                   relevant only if staged_cs is set.
  * @timeout_jiffies: cs timeout in jiffies.
  * @submission_time_jiffies: submission time of the cs
  * @type: CS_TYPE_*.
+ * @encaps_sig_hdl_id: encaps signals handle id, set for the first staged cs.
  * @submitted: true if CS was submitted to H/W.
  * @completed: true if CS was completed by device.
  * @timedout : true if CS was timedout.
@@ -1445,6 +1496,7 @@ struct hl_userptr {
  * @staged_cs: true if this CS is part of a staged submission.
  * @skip_reset_on_timeout: true if we shall not reset the device in case
  *                         timeout occurs (debug scenario).
+ * @encaps_signals: true if this CS has encaps reserved signals.
  */
 struct hl_cs {
 	u16			*jobs_in_queue_cnt;
@@ -1459,11 +1511,13 @@ struct hl_cs {
 	struct list_head	mirror_node;
 	struct list_head	staged_cs_node;
 	struct list_head	debugfs_list;
+	struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
 	u64			sequence;
 	u64			staged_sequence;
 	u64			timeout_jiffies;
 	u64			submission_time_jiffies;
 	enum hl_cs_type		type;
+	u32			encaps_sig_hdl_id;
 	u8			submitted;
 	u8			completed;
 	u8			timedout;
@@ -1474,6 +1528,7 @@ struct hl_cs {
 	u8			staged_first;
 	u8			staged_cs;
 	u8			skip_reset_on_timeout;
+	u8			encaps_signals;
 };
 
 /**
@@ -1493,6 +1548,8 @@ struct hl_cs {
  * @hw_queue_id: the id of the H/W queue this job is submitted to.
  * @user_cb_size: the actual size of the CB we got from the user.
  * @job_cb_size: the actual size of the CB that we put on the queue.
+ * @encaps_sig_wait_offset: encapsulated signals offset, which allow user
+ *                          to wait on part of the reserved signals.
  * @is_kernel_allocated_cb: true if the CB handle we got from the user holds a
  *                          handle to a kernel-allocated CB object, false
  *                          otherwise (SRAM/DRAM/host address).
@@ -1517,6 +1574,7 @@ struct hl_cs_job {
 	u32			hw_queue_id;
 	u32			user_cb_size;
 	u32			job_cb_size;
+	u32			encaps_sig_wait_offset;
 	u8			is_kernel_allocated_cb;
 	u8			contains_dma_pkt;
 };
@@ -1613,7 +1671,7 @@ struct hl_vm_hw_block_list_node {
  * @created_from_userptr: is product of host virtual address.
  */
 struct hl_vm_phys_pg_pack {
-	enum vm_type_t		vm_type; /* must be first */
+	enum vm_type		vm_type; /* must be first */
 	u64			*pages;
 	u64			npages;
 	u64			total_size;
@@ -1759,9 +1817,13 @@ struct hl_debugfs_entry {
  * @ctx_mem_hash_list: list of available contexts with MMU mappings.
  * @ctx_mem_hash_spinlock: protects cb_list.
  * @blob_desc: descriptor of blob
+ * @state_dump: data of the system states in case of a bad cs.
+ * @state_dump_sem: protects state_dump.
  * @addr: next address to read/write from/to in read/write32.
  * @mmu_addr: next virtual address to translate to physical address in mmu_show.
+ * @userptr_lookup: the target user ptr to look up for on demand.
  * @mmu_asid: ASID to use while translating in mmu_show.
+ * @state_dump_head: index of the latest state dump
  * @i2c_bus: generic u8 debugfs file for bus value to use in i2c_data_read.
  * @i2c_addr: generic u8 debugfs file for address value to use in i2c_data_read.
  * @i2c_reg: generic u8 debugfs file for register value to use in i2c_data_read.
@@ -1783,14 +1845,149 @@ struct hl_dbg_device_entry {
 	struct list_head		ctx_mem_hash_list;
 	spinlock_t			ctx_mem_hash_spinlock;
 	struct debugfs_blob_wrapper	blob_desc;
+	char				*state_dump[HL_STATE_DUMP_HIST_LEN];
+	struct rw_semaphore		state_dump_sem;
 	u64				addr;
 	u64				mmu_addr;
+	u64				userptr_lookup;
 	u32				mmu_asid;
+	u32				state_dump_head;
 	u8				i2c_bus;
 	u8				i2c_addr;
 	u8				i2c_reg;
 };
 
+/**
+ * struct hl_hw_obj_name_entry - single hw object name, member of
+ * hl_state_dump_specs
+ * @node: link to the containing hash table
+ * @name: hw object name
+ * @id: object identifier
+ */
+struct hl_hw_obj_name_entry {
+	struct hlist_node	node;
+	const char		*name;
+	u32			id;
+};
+
+enum hl_state_dump_specs_props {
+	SP_SYNC_OBJ_BASE_ADDR,
+	SP_NEXT_SYNC_OBJ_ADDR,
+	SP_SYNC_OBJ_AMOUNT,
+	SP_MON_OBJ_WR_ADDR_LOW,
+	SP_MON_OBJ_WR_ADDR_HIGH,
+	SP_MON_OBJ_WR_DATA,
+	SP_MON_OBJ_ARM_DATA,
+	SP_MON_OBJ_STATUS,
+	SP_MONITORS_AMOUNT,
+	SP_TPC0_CMDQ,
+	SP_TPC0_CFG_SO,
+	SP_NEXT_TPC,
+	SP_MME_CMDQ,
+	SP_MME_CFG_SO,
+	SP_NEXT_MME,
+	SP_DMA_CMDQ,
+	SP_DMA_CFG_SO,
+	SP_DMA_QUEUES_OFFSET,
+	SP_NUM_OF_MME_ENGINES,
+	SP_SUB_MME_ENG_NUM,
+	SP_NUM_OF_DMA_ENGINES,
+	SP_NUM_OF_TPC_ENGINES,
+	SP_ENGINE_NUM_OF_QUEUES,
+	SP_ENGINE_NUM_OF_STREAMS,
+	SP_ENGINE_NUM_OF_FENCES,
+	SP_FENCE0_CNT_OFFSET,
+	SP_FENCE0_RDATA_OFFSET,
+	SP_CP_STS_OFFSET,
+	SP_NUM_CORES,
+
+	SP_MAX
+};
+
+enum hl_sync_engine_type {
+	ENGINE_TPC,
+	ENGINE_DMA,
+	ENGINE_MME,
+};
+
+/**
+ * struct hl_mon_state_dump - represents a state dump of a single monitor
+ * @id: monitor id
+ * @wr_addr_low: address monitor will write to, low bits
+ * @wr_addr_high: address monitor will write to, high bits
+ * @wr_data: data monitor will write
+ * @arm_data: register value containing monitor configuration
+ * @status: monitor status
+ */
+struct hl_mon_state_dump {
+	u32		id;
+	u32		wr_addr_low;
+	u32		wr_addr_high;
+	u32		wr_data;
+	u32		arm_data;
+	u32		status;
+};
+
+/**
+ * struct hl_sync_to_engine_map_entry - sync object id to engine mapping entry
+ * @engine_type: type of the engine
+ * @engine_id: id of the engine
+ * @sync_id: id of the sync object
+ */
+struct hl_sync_to_engine_map_entry {
+	struct hlist_node		node;
+	enum hl_sync_engine_type	engine_type;
+	u32				engine_id;
+	u32				sync_id;
+};
+
+/**
+ * struct hl_sync_to_engine_map - maps sync object id to associated engine id
+ * @tb: hash table containing the mapping, each element is of type
+ *      struct hl_sync_to_engine_map_entry
+ */
+struct hl_sync_to_engine_map {
+	DECLARE_HASHTABLE(tb, SYNC_TO_ENGINE_HASH_TABLE_BITS);
+};
+
+/**
+ * struct hl_state_dump_specs_funcs - virtual functions used by the state dump
+ * @gen_sync_to_engine_map: generate a hash map from sync obj id to its engine
+ * @print_single_monitor: format monitor data as string
+ * @monitor_valid: return true if given monitor dump is valid
+ * @print_fences_single_engine: format fences data as string
+ */
+struct hl_state_dump_specs_funcs {
+	int (*gen_sync_to_engine_map)(struct hl_device *hdev,
+				struct hl_sync_to_engine_map *map);
+	int (*print_single_monitor)(char **buf, size_t *size, size_t *offset,
+				    struct hl_device *hdev,
+				    struct hl_mon_state_dump *mon);
+	int (*monitor_valid)(struct hl_mon_state_dump *mon);
+	int (*print_fences_single_engine)(struct hl_device *hdev,
+					u64 base_offset,
+					u64 status_base_offset,
+					enum hl_sync_engine_type engine_type,
+					u32 engine_id, char **buf,
+					size_t *size, size_t *offset);
+};
+
+/**
+ * struct hl_state_dump_specs - defines ASIC known hw objects names
+ * @so_id_to_str_tb: sync objects names index table
+ * @monitor_id_to_str_tb: monitors names index table
+ * @funcs: virtual functions used for state dump
+ * @sync_namager_names: readable names for sync manager if available (ex: N_E)
+ * @props: pointer to a per asic const props array required for state dump
+ */
+struct hl_state_dump_specs {
+	DECLARE_HASHTABLE(so_id_to_str_tb, OBJ_NAMES_HASH_TABLE_BITS);
+	DECLARE_HASHTABLE(monitor_id_to_str_tb, OBJ_NAMES_HASH_TABLE_BITS);
+	struct hl_state_dump_specs_funcs	funcs;
+	const char * const			*sync_namager_names;
+	s64					*props;
+};
+
 
 /*
  * DEVICES
@@ -1798,7 +1995,7 @@ struct hl_dbg_device_entry {
 
 #define HL_STR_MAX	32
 
-#define HL_DEV_STS_MAX (HL_DEVICE_STATUS_NEEDS_RESET + 1)
+#define HL_DEV_STS_MAX (HL_DEVICE_STATUS_LAST + 1)
 
 /* Theoretical limit only. A single host can only contain up to 4 or 8 PCIe
  * x16 cards. In extreme cases, there are hosts that can accommodate 16 cards.
@@ -1946,11 +2143,13 @@ struct hwmon_chip_info;
  * @wq: work queue for device reset procedure.
  * @reset_work: reset work to be done.
  * @hdev: habanalabs device structure.
+ * @fw_reset: whether f/w will do the reset without us sending them a message to do it.
  */
 struct hl_device_reset_work {
 	struct workqueue_struct		*wq;
 	struct delayed_work		reset_work;
 	struct hl_device		*hdev;
+	bool				fw_reset;
 };
 
 /**
@@ -2065,6 +2264,58 @@ struct hl_mmu_funcs {
 };
 
 /**
+ * number of user contexts allowed to call wait_for_multi_cs ioctl in
+ * parallel
+ */
+#define MULTI_CS_MAX_USER_CTX	2
+
+/**
+ * struct multi_cs_completion - multi CS wait completion.
+ * @completion: completion of any of the CS in the list
+ * @lock: spinlock for the completion structure
+ * @timestamp: timestamp for the multi-CS completion
+ * @stream_master_qid_map: bitmap of all stream masters on which the multi-CS
+ *                        is waiting
+ * @used: 1 if in use, otherwise 0
+ */
+struct multi_cs_completion {
+	struct completion	completion;
+	spinlock_t		lock;
+	s64			timestamp;
+	u32			stream_master_qid_map;
+	u8			used;
+};
+
+/**
+ * struct multi_cs_data - internal data for multi CS call
+ * @ctx: pointer to the context structure
+ * @fence_arr: array of fences of all CSs
+ * @seq_arr: array of CS sequence numbers
+ * @timeout_us: timeout in usec for waiting for CS to complete
+ * @timestamp: timestamp of first completed CS
+ * @wait_status: wait for CS status
+ * @completion_bitmap: bitmap of completed CSs (1- completed, otherwise 0)
+ * @stream_master_qid_map: bitmap of all stream master QIDs on which the
+ *                         multi-CS is waiting
+ * @arr_len: fence_arr and seq_arr array length
+ * @gone_cs: indication of gone CS (1- there was gone CS, otherwise 0)
+ * @update_ts: update timestamp. 1- update the timestamp, otherwise 0.
+ */
+struct multi_cs_data {
+	struct hl_ctx	*ctx;
+	struct hl_fence	**fence_arr;
+	u64		*seq_arr;
+	s64		timeout_us;
+	s64		timestamp;
+	long		wait_status;
+	u32		completion_bitmap;
+	u32		stream_master_qid_map;
+	u8		arr_len;
+	u8		gone_cs;
+	u8		update_ts;
+};
+
+/**
  * struct hl_device - habanalabs device structure.
  * @pdev: pointer to PCI device, can be NULL in case of simulator device.
  * @pcie_bar_phys: array of available PCIe bars physical addresses.
@@ -2129,6 +2380,8 @@ struct hl_mmu_funcs {
  * @mmu_func: device-related MMU functions.
  * @fw_loader: FW loader manager.
  * @pci_mem_region: array of memory regions in the PCI
+ * @state_dump_specs: constants and dictionaries needed to dump system state.
+ * @multi_cs_completion: array of multi-CS completion.
  * @dram_used_mem: current DRAM memory consumption.
  * @timeout_jiffies: device CS timeout value.
  * @max_power: the max power of the device, as configured by the sysadmin. This
@@ -2205,6 +2458,7 @@ struct hl_mmu_funcs {
  *                        halted. We can't halt it again because the COMMS
  *                        protocol will throw an error. Relevant only for
  *                        cases where Linux was not loaded to device CPU
+ * @supports_wait_for_multi_cs: true if wait for multi CS is supported
  */
 struct hl_device {
 	struct pci_dev			*pdev;
@@ -2273,6 +2527,11 @@ struct hl_device {
 
 	struct pci_mem_region		pci_mem_region[PCI_REGION_NUMBER];
 
+	struct hl_state_dump_specs	state_dump_specs;
+
+	struct multi_cs_completion	multi_cs_completion[
+							MULTI_CS_MAX_USER_CTX];
+	u32				*stream_master_qid_arr;
 	atomic64_t			dram_used_mem;
 	u64				timeout_jiffies;
 	u64				max_power;
@@ -2322,6 +2581,8 @@ struct hl_device {
 	u8				curr_reset_cause;
 	u8				skip_reset_on_timeout;
 	u8				device_cpu_is_halted;
+	u8				supports_wait_for_multi_cs;
+	u8				stream_master_qid_arr_size;
 
 	/* Parameters for bring-up */
 	u64				nic_ports_mask;
@@ -2343,6 +2604,29 @@ struct hl_device {
 };
 
 
+/**
+ * struct hl_cs_encaps_sig_handle - encapsulated signals handle structure
+ * @refcount: refcount used to protect removing this id when several
+ *            wait cs are used to wait of the reserved encaps signals.
+ * @hdev: pointer to habanalabs device structure.
+ * @hw_sob: pointer to  H/W SOB used in the reservation.
+ * @cs_seq: staged cs sequence which contains encapsulated signals
+ * @id: idr handler id to be used to fetch the handler info
+ * @q_idx: stream queue index
+ * @pre_sob_val: current SOB value before reservation
+ * @count: signals number
+ */
+struct hl_cs_encaps_sig_handle {
+	struct kref refcount;
+	struct hl_device *hdev;
+	struct hl_hw_sob *hw_sob;
+	u64  cs_seq;
+	u32  id;
+	u32  q_idx;
+	u32  pre_sob_val;
+	u32  count;
+};
+
 /*
  * IOCTLs
  */
@@ -2373,6 +2657,23 @@ struct hl_ioctl_desc {
  */
 
 /**
+ * hl_get_sg_info() - get number of pages and the DMA address from SG list.
+ * @sg: the SG list.
+ * @dma_addr: pointer to DMA address to return.
+ *
+ * Calculate the number of consecutive pages described by the SG list. Take the
+ * offset of the address in the first page, add to it the length and round it up
+ * to the number of needed pages.
+ */
+static inline u32 hl_get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
+{
+	*dma_addr = sg_dma_address(sg);
+
+	return ((((*dma_addr) & (PAGE_SIZE - 1)) + sg_dma_len(sg)) +
+			(PAGE_SIZE - 1)) >> PAGE_SHIFT;
+}
+
+/**
  * hl_mem_area_inside_range() - Checks whether address+size are inside a range.
  * @address: The start address of the area we want to validate.
  * @size: The size in bytes of the area we want to validate.
@@ -2436,7 +2737,9 @@ void destroy_hdev(struct hl_device *hdev);
 int hl_hw_queues_create(struct hl_device *hdev);
 void hl_hw_queues_destroy(struct hl_device *hdev);
 int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
-				u32 cb_size, u64 cb_ptr);
+		u32 cb_size, u64 cb_ptr);
+void hl_hw_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q,
+		u32 ctl, u32 len, u64 ptr);
 int hl_hw_queue_schedule_cs(struct hl_cs *cs);
 u32 hl_hw_queue_add_ptr(u32 ptr, u16 val);
 void hl_hw_queue_inc_ci_kernel(struct hl_device *hdev, u32 hw_queue_id);
@@ -2470,6 +2773,8 @@ void hl_ctx_do_release(struct kref *ref);
 void hl_ctx_get(struct hl_device *hdev,	struct hl_ctx *ctx);
 int hl_ctx_put(struct hl_ctx *ctx);
 struct hl_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq);
+int hl_ctx_get_fences(struct hl_ctx *ctx, u64 *seq_arr,
+				struct hl_fence **fence, u32 arr_len);
 void hl_ctx_mgr_init(struct hl_ctx_mgr *mgr);
 void hl_ctx_mgr_fini(struct hl_device *hdev, struct hl_ctx_mgr *mgr);
 
@@ -2511,18 +2816,19 @@ int hl_cb_va_pool_init(struct hl_ctx *ctx);
 void hl_cb_va_pool_fini(struct hl_ctx *ctx);
 
 void hl_cs_rollback_all(struct hl_device *hdev);
-void hl_pending_cb_list_flush(struct hl_ctx *ctx);
 struct hl_cs_job *hl_cs_allocate_job(struct hl_device *hdev,
 		enum hl_queue_type queue_type, bool is_kernel_allocated_cb);
 void hl_sob_reset_error(struct kref *ref);
 int hl_gen_sob_mask(u16 sob_base, u8 sob_mask, u8 *mask);
 void hl_fence_put(struct hl_fence *fence);
+void hl_fences_put(struct hl_fence **fence, int len);
 void hl_fence_get(struct hl_fence *fence);
 void cs_get(struct hl_cs *cs);
 bool cs_needs_completion(struct hl_cs *cs);
 bool cs_needs_timeout(struct hl_cs *cs);
 bool is_staged_cs_last_exists(struct hl_device *hdev, struct hl_cs *cs);
 struct hl_cs *hl_staged_cs_find_first(struct hl_device *hdev, u64 cs_seq);
+void hl_multi_cs_completion_init(struct hl_device *hdev);
 
 void goya_set_asic_funcs(struct hl_device *hdev);
 void gaudi_set_asic_funcs(struct hl_device *hdev);
@@ -2650,9 +2956,25 @@ int hl_set_voltage(struct hl_device *hdev,
 			int sensor_index, u32 attr, long value);
 int hl_set_current(struct hl_device *hdev,
 			int sensor_index, u32 attr, long value);
+void hw_sob_get(struct hl_hw_sob *hw_sob);
+void hw_sob_put(struct hl_hw_sob *hw_sob);
+void hl_encaps_handle_do_release(struct kref *ref);
+void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev,
+			struct hl_cs *cs, struct hl_cs_job *job,
+			struct hl_cs_compl *cs_cmpl);
 void hl_release_pending_user_interrupts(struct hl_device *hdev);
 int hl_cs_signal_sob_wraparound_handler(struct hl_device *hdev, u32 q_idx,
-			struct hl_hw_sob **hw_sob, u32 count);
+			struct hl_hw_sob **hw_sob, u32 count, bool encaps_sig);
+
+int hl_state_dump(struct hl_device *hdev);
+const char *hl_state_dump_get_sync_name(struct hl_device *hdev, u32 sync_id);
+const char *hl_state_dump_get_monitor_name(struct hl_device *hdev,
+					struct hl_mon_state_dump *mon);
+void hl_state_dump_free_sync_to_engine_map(struct hl_sync_to_engine_map *map);
+__printf(4, 5) int hl_snprintf_resize(char **buf, size_t *size, size_t *offset,
+					const char *format, ...);
+char *hl_format_as_binary(char *buf, size_t buf_len, u32 n);
+const char *hl_sync_engine_to_string(enum hl_sync_engine_type engine_type);
 
 #ifdef CONFIG_DEBUG_FS
 
@@ -2673,6 +2995,8 @@ void hl_debugfs_remove_userptr(struct hl_device *hdev,
 				struct hl_userptr *userptr);
 void hl_debugfs_add_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx);
 void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev, struct hl_ctx *ctx);
+void hl_debugfs_set_state_dump(struct hl_device *hdev, char *data,
+					unsigned long length);
 
 #else
 
@@ -2746,6 +3070,11 @@ static inline void hl_debugfs_remove_ctx_mem_hash(struct hl_device *hdev,
 {
 }
 
+static inline void hl_debugfs_set_state_dump(struct hl_device *hdev,
+					char *data, unsigned long length)
+{
+}
+
 #endif
 
 /* IOCTLs */
diff --git a/drivers/misc/habanalabs/common/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index 4194cda2d04c..a75e4fceb9d8 100644
--- a/drivers/misc/habanalabs/common/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -141,7 +141,7 @@ int hl_device_open(struct inode *inode, struct file *filp)
 	hl_cb_mgr_init(&hpriv->cb_mgr);
 	hl_ctx_mgr_init(&hpriv->ctx_mgr);
 
-	hpriv->taskpid = find_get_pid(current->pid);
+	hpriv->taskpid = get_task_pid(current, PIDTYPE_PID);
 
 	mutex_lock(&hdev->fpriv_list_lock);
 
@@ -194,7 +194,6 @@ int hl_device_open(struct inode *inode, struct file *filp)
 
 out_err:
 	mutex_unlock(&hdev->fpriv_list_lock);
-
 	hl_cb_mgr_fini(hpriv->hdev, &hpriv->cb_mgr);
 	hl_ctx_mgr_fini(hpriv->hdev, &hpriv->ctx_mgr);
 	filp->private_data = NULL;
@@ -318,12 +317,16 @@ int create_hdev(struct hl_device **dev, struct pci_dev *pdev,
 		hdev->asic_prop.fw_security_enabled = false;
 
 	/* Assign status description string */
-	strncpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION],
-					"disabled", HL_STR_MAX);
+	strncpy(hdev->status[HL_DEVICE_STATUS_OPERATIONAL],
+					"operational", HL_STR_MAX);
 	strncpy(hdev->status[HL_DEVICE_STATUS_IN_RESET],
 					"in reset", HL_STR_MAX);
+	strncpy(hdev->status[HL_DEVICE_STATUS_MALFUNCTION],
+					"disabled", HL_STR_MAX);
 	strncpy(hdev->status[HL_DEVICE_STATUS_NEEDS_RESET],
 					"needs reset", HL_STR_MAX);
+	strncpy(hdev->status[HL_DEVICE_STATUS_IN_DEVICE_CREATION],
+					"in device creation", HL_STR_MAX);
 
 	hdev->major = hl_major;
 	hdev->reset_on_lockup = reset_on_lockup;
@@ -532,7 +535,7 @@ hl_pci_err_detected(struct pci_dev *pdev, pci_channel_state_t state)
 		result = PCI_ERS_RESULT_NONE;
 	}
 
-	hdev->asic_funcs->halt_engines(hdev, true);
+	hdev->asic_funcs->halt_engines(hdev, true, false);
 
 	return result;
 }
diff --git a/drivers/misc/habanalabs/common/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index f4dda7b4acdd..86c3257d9ae1 100644
--- a/drivers/misc/habanalabs/common/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -94,6 +94,8 @@ static int hw_ip_info(struct hl_device *hdev, struct hl_info_args *args)
 
 	hw_ip.first_available_interrupt_id =
 			prop->first_available_user_msix_interrupt;
+	hw_ip.server_type = prop->server_type;
+
 	return copy_to_user(out, &hw_ip,
 		min((size_t) size, sizeof(hw_ip))) ? -EFAULT : 0;
 }
diff --git a/drivers/misc/habanalabs/common/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c
index bcabfdbf1e01..76b7de8f1406 100644
--- a/drivers/misc/habanalabs/common/hw_queue.c
+++ b/drivers/misc/habanalabs/common/hw_queue.c
@@ -65,7 +65,7 @@ void hl_hw_queue_update_ci(struct hl_cs *cs)
 }
 
 /*
- * ext_and_hw_queue_submit_bd() - Submit a buffer descriptor to an external or a
+ * hl_hw_queue_submit_bd() - Submit a buffer descriptor to an external or a
  *                                H/W queue.
  * @hdev: pointer to habanalabs device structure
  * @q: pointer to habanalabs queue structure
@@ -80,8 +80,8 @@ void hl_hw_queue_update_ci(struct hl_cs *cs)
  * This function must be called when the scheduler mutex is taken
  *
  */
-static void ext_and_hw_queue_submit_bd(struct hl_device *hdev,
-			struct hl_hw_queue *q, u32 ctl, u32 len, u64 ptr)
+void hl_hw_queue_submit_bd(struct hl_device *hdev, struct hl_hw_queue *q,
+		u32 ctl, u32 len, u64 ptr)
 {
 	struct hl_bd *bd;
 
@@ -222,8 +222,8 @@ static int hw_queue_sanity_checks(struct hl_device *hdev, struct hl_hw_queue *q,
  * @cb_size: size of CB
  * @cb_ptr: pointer to CB location
  *
- * This function sends a single CB, that must NOT generate a completion entry
- *
+ * This function sends a single CB, that must NOT generate a completion entry.
+ * Sending CPU messages can be done instead via 'hl_hw_queue_submit_bd()'
  */
 int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
 				u32 cb_size, u64 cb_ptr)
@@ -231,16 +231,7 @@ int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
 	struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id];
 	int rc = 0;
 
-	/*
-	 * The CPU queue is a synchronous queue with an effective depth of
-	 * a single entry (although it is allocated with room for multiple
-	 * entries). Therefore, there is a different lock, called
-	 * send_cpu_message_lock, that serializes accesses to the CPU queue.
-	 * As a result, we don't need to lock the access to the entire H/W
-	 * queues module when submitting a JOB to the CPU queue
-	 */
-	if (q->queue_type != QUEUE_TYPE_CPU)
-		hdev->asic_funcs->hw_queues_lock(hdev);
+	hdev->asic_funcs->hw_queues_lock(hdev);
 
 	if (hdev->disabled) {
 		rc = -EPERM;
@@ -258,11 +249,10 @@ int hl_hw_queue_send_cb_no_cmpl(struct hl_device *hdev, u32 hw_queue_id,
 			goto out;
 	}
 
-	ext_and_hw_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr);
+	hl_hw_queue_submit_bd(hdev, q, 0, cb_size, cb_ptr);
 
 out:
-	if (q->queue_type != QUEUE_TYPE_CPU)
-		hdev->asic_funcs->hw_queues_unlock(hdev);
+	hdev->asic_funcs->hw_queues_unlock(hdev);
 
 	return rc;
 }
@@ -328,7 +318,7 @@ static void ext_queue_schedule_job(struct hl_cs_job *job)
 	cq->pi = hl_cq_inc_ptr(cq->pi);
 
 submit_bd:
-	ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
+	hl_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
 }
 
 /*
@@ -407,7 +397,7 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
 	else
 		ptr = (u64) (uintptr_t) job->user_cb;
 
-	ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
+	hl_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
 }
 
 static int init_signal_cs(struct hl_device *hdev,
@@ -426,8 +416,9 @@ static int init_signal_cs(struct hl_device *hdev,
 	cs_cmpl->sob_val = prop->next_sob_val;
 
 	dev_dbg(hdev->dev,
-		"generate signal CB, sob_id: %d, sob val: 0x%x, q_idx: %d\n",
-		cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val, q_idx);
+		"generate signal CB, sob_id: %d, sob val: %u, q_idx: %d, seq: %llu\n",
+		cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val, q_idx,
+		cs_cmpl->cs_seq);
 
 	/* we set an EB since we must make sure all oeprations are done
 	 * when sending the signal
@@ -435,17 +426,37 @@ static int init_signal_cs(struct hl_device *hdev,
 	hdev->asic_funcs->gen_signal_cb(hdev, job->patched_cb,
 				cs_cmpl->hw_sob->sob_id, 0, true);
 
-	rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, 1);
+	rc = hl_cs_signal_sob_wraparound_handler(hdev, q_idx, &hw_sob, 1,
+								false);
 
 	return rc;
 }
 
-static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
+void hl_hw_queue_encaps_sig_set_sob_info(struct hl_device *hdev,
+			struct hl_cs *cs, struct hl_cs_job *job,
+			struct hl_cs_compl *cs_cmpl)
+{
+	struct hl_cs_encaps_sig_handle *handle = cs->encaps_sig_hdl;
+
+	cs_cmpl->hw_sob = handle->hw_sob;
+
+	/* Note that encaps_sig_wait_offset was validated earlier in the flow
+	 * for offset value which exceeds the max reserved signal count.
+	 * always decrement 1 of the offset since when the user
+	 * set offset 1 for example he mean to wait only for the first
+	 * signal only, which will be pre_sob_val, and if he set offset 2
+	 * then the value required is (pre_sob_val + 1) and so on...
+	 */
+	cs_cmpl->sob_val = handle->pre_sob_val +
+			(job->encaps_sig_wait_offset - 1);
+}
+
+static int init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
 		struct hl_cs_job *job, struct hl_cs_compl *cs_cmpl)
 {
-	struct hl_cs_compl *signal_cs_cmpl;
-	struct hl_sync_stream_properties *prop;
 	struct hl_gen_wait_properties wait_prop;
+	struct hl_sync_stream_properties *prop;
+	struct hl_cs_compl *signal_cs_cmpl;
 	u32 q_idx;
 
 	q_idx = job->hw_queue_id;
@@ -455,14 +466,51 @@ static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
 					struct hl_cs_compl,
 					base_fence);
 
-	/* copy the SOB id and value of the signal CS */
-	cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
-	cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
+	if (cs->encaps_signals) {
+		/* use the encaps signal handle stored earlier in the flow
+		 * and set the SOB information from the encaps
+		 * signals handle
+		 */
+		hl_hw_queue_encaps_sig_set_sob_info(hdev, cs, job, cs_cmpl);
+
+		dev_dbg(hdev->dev, "Wait for encaps signals handle, qidx(%u), CS sequence(%llu), sob val: 0x%x, offset: %u\n",
+				cs->encaps_sig_hdl->q_idx,
+				cs->encaps_sig_hdl->cs_seq,
+				cs_cmpl->sob_val,
+				job->encaps_sig_wait_offset);
+	} else {
+		/* Copy the SOB id and value of the signal CS */
+		cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
+		cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
+	}
+
+	/* check again if the signal cs already completed.
+	 * if yes then don't send any wait cs since the hw_sob
+	 * could be in reset already. if signal is not completed
+	 * then get refcount to hw_sob to prevent resetting the sob
+	 * while wait cs is not submitted.
+	 * note that this check is protected by two locks,
+	 * hw queue lock and completion object lock,
+	 * and the same completion object lock also protects
+	 * the hw_sob reset handler function.
+	 * The hw_queue lock prevent out of sync of hw_sob
+	 * refcount value, changed by signal/wait flows.
+	 */
+	spin_lock(&signal_cs_cmpl->lock);
+
+	if (completion_done(&cs->signal_fence->completion)) {
+		spin_unlock(&signal_cs_cmpl->lock);
+		return -EINVAL;
+	}
+
+	kref_get(&cs_cmpl->hw_sob->kref);
+
+	spin_unlock(&signal_cs_cmpl->lock);
 
 	dev_dbg(hdev->dev,
-		"generate wait CB, sob_id: %d, sob_val: 0x%x, mon_id: %d, q_idx: %d\n",
+		"generate wait CB, sob_id: %d, sob_val: 0x%x, mon_id: %d, q_idx: %d, seq: %llu\n",
 		cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val,
-		prop->base_mon_id, q_idx);
+		prop->base_mon_id, q_idx, cs->sequence);
 
 	wait_prop.data = (void *) job->patched_cb;
 	wait_prop.sob_base = cs_cmpl->hw_sob->sob_id;
@@ -471,17 +519,14 @@ static void init_wait_cs(struct hl_device *hdev, struct hl_cs *cs,
 	wait_prop.mon_id = prop->base_mon_id;
 	wait_prop.q_idx = q_idx;
 	wait_prop.size = 0;
+
 	hdev->asic_funcs->gen_wait_cb(hdev, &wait_prop);
 
-	kref_get(&cs_cmpl->hw_sob->kref);
-	/*
-	 * Must put the signal fence after the SOB refcnt increment so
-	 * the SOB refcnt won't turn 0 and reset the SOB before the
-	 * wait CS was submitted.
-	 */
 	mb();
 	hl_fence_put(cs->signal_fence);
 	cs->signal_fence = NULL;
+
+	return 0;
 }
 
 /*
@@ -506,7 +551,60 @@ static int init_signal_wait_cs(struct hl_cs *cs)
 	if (cs->type & CS_TYPE_SIGNAL)
 		rc = init_signal_cs(hdev, job, cs_cmpl);
 	else if (cs->type & CS_TYPE_WAIT)
-		init_wait_cs(hdev, cs, job, cs_cmpl);
+		rc = init_wait_cs(hdev, cs, job, cs_cmpl);
+
+	return rc;
+}
+
+static int encaps_sig_first_staged_cs_handler
+			(struct hl_device *hdev, struct hl_cs *cs)
+{
+	struct hl_cs_compl *cs_cmpl =
+			container_of(cs->fence,
+					struct hl_cs_compl, base_fence);
+	struct hl_cs_encaps_sig_handle *encaps_sig_hdl;
+	struct hl_encaps_signals_mgr *mgr;
+	int rc = 0;
+
+	mgr = &hdev->compute_ctx->sig_mgr;
+
+	spin_lock(&mgr->lock);
+	encaps_sig_hdl = idr_find(&mgr->handles, cs->encaps_sig_hdl_id);
+	if (encaps_sig_hdl) {
+		/*
+		 * Set handler CS sequence,
+		 * the CS which contains the encapsulated signals.
+		 */
+		encaps_sig_hdl->cs_seq = cs->sequence;
+		/* store the handle and set encaps signal indication,
+		 * to be used later in cs_do_release to put the last
+		 * reference to encaps signals handlers.
+		 */
+		cs_cmpl->encaps_signals = true;
+		cs_cmpl->encaps_sig_hdl = encaps_sig_hdl;
+
+		/* set hw_sob pointer in completion object
+		 * since it's used in cs_do_release flow to put
+		 * refcount to sob
+		 */
+		cs_cmpl->hw_sob = encaps_sig_hdl->hw_sob;
+		cs_cmpl->sob_val = encaps_sig_hdl->pre_sob_val +
+						encaps_sig_hdl->count;
+
+		dev_dbg(hdev->dev, "CS seq (%llu) added to encaps signal handler id (%u), count(%u), qidx(%u), sob(%u), val(%u)\n",
+				cs->sequence, encaps_sig_hdl->id,
+				encaps_sig_hdl->count,
+				encaps_sig_hdl->q_idx,
+				cs_cmpl->hw_sob->sob_id,
+				cs_cmpl->sob_val);
+
+	} else {
+		dev_err(hdev->dev, "encaps handle id(%u) wasn't found!\n",
+				cs->encaps_sig_hdl_id);
+		rc = -EINVAL;
+	}
+
+	spin_unlock(&mgr->lock);
 
 	return rc;
 }
@@ -581,14 +679,21 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
 
 	if ((cs->type == CS_TYPE_SIGNAL) || (cs->type == CS_TYPE_WAIT)) {
 		rc = init_signal_wait_cs(cs);
-		if (rc) {
-			dev_err(hdev->dev, "Failed to submit signal cs\n");
+		if (rc)
 			goto unroll_cq_resv;
-		}
-	} else if (cs->type == CS_TYPE_COLLECTIVE_WAIT)
-		hdev->asic_funcs->collective_wait_init_cs(cs);
+	} else if (cs->type == CS_TYPE_COLLECTIVE_WAIT) {
+		rc = hdev->asic_funcs->collective_wait_init_cs(cs);
+		if (rc)
+			goto unroll_cq_resv;
+	}
 
 
+	if (cs->encaps_signals && cs->staged_first) {
+		rc = encaps_sig_first_staged_cs_handler(hdev, cs);
+		if (rc)
+			goto unroll_cq_resv;
+	}
+
 	spin_lock(&hdev->cs_mirror_lock);
 
 	/* Verify staged CS exists and add to the staged list */
@@ -613,6 +718,11 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
 		}
 
 		list_add_tail(&cs->staged_cs_node, &staged_cs->staged_cs_node);
+
+		/* update stream map of the first CS */
+		if (hdev->supports_wait_for_multi_cs)
+			staged_cs->fence->stream_master_qid_map |=
+					cs->fence->stream_master_qid_map;
 	}
 
 	list_add_tail(&cs->mirror_node, &hdev->cs_mirror_list);
@@ -834,6 +944,8 @@ static void sync_stream_queue_init(struct hl_device *hdev, u32 q_idx)
 		hw_sob = &sync_stream_prop->hw_sob[sob];
 		hw_sob->hdev = hdev;
 		hw_sob->sob_id = sync_stream_prop->base_sob_id + sob;
+		hw_sob->sob_addr =
+			hdev->asic_funcs->get_sob_addr(hdev, hw_sob->sob_id);
 		hw_sob->q_idx = q_idx;
 		kref_init(&hw_sob->kref);
 	}
diff --git a/drivers/misc/habanalabs/common/memory.c b/drivers/misc/habanalabs/common/memory.c
index af339ce1ab4f..33986933aa9e 100644
--- a/drivers/misc/habanalabs/common/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -124,7 +124,7 @@ static int alloc_device_memory(struct hl_ctx *ctx, struct hl_mem_in *args,
 
 	spin_lock(&vm->idr_lock);
 	handle = idr_alloc(&vm->phys_pg_pack_handles, phys_pg_pack, 1, 0,
-				GFP_KERNEL);
+				GFP_ATOMIC);
 	spin_unlock(&vm->idr_lock);
 
 	if (handle < 0) {
@@ -529,6 +529,33 @@ static inline int add_va_block(struct hl_device *hdev,
 }
 
 /**
+ * is_hint_crossing_range() - check if hint address crossing specified reserved
+ * range.
+ */
+static inline bool is_hint_crossing_range(enum hl_va_range_type range_type,
+		u64 start_addr, u32 size, struct asic_fixed_properties *prop) {
+	bool range_cross;
+
+	if (range_type == HL_VA_RANGE_TYPE_DRAM)
+		range_cross =
+			hl_mem_area_crosses_range(start_addr, size,
+			prop->hints_dram_reserved_va_range.start_addr,
+			prop->hints_dram_reserved_va_range.end_addr);
+	else if (range_type == HL_VA_RANGE_TYPE_HOST)
+		range_cross =
+			hl_mem_area_crosses_range(start_addr,	size,
+			prop->hints_host_reserved_va_range.start_addr,
+			prop->hints_host_reserved_va_range.end_addr);
+	else
+		range_cross =
+			hl_mem_area_crosses_range(start_addr, size,
+			prop->hints_host_hpage_reserved_va_range.start_addr,
+			prop->hints_host_hpage_reserved_va_range.end_addr);
+
+	return range_cross;
+}
+
+/**
  * get_va_block() - get a virtual block for the given size and alignment.
  *
  * @hdev: pointer to the habanalabs device structure.
@@ -536,6 +563,8 @@ static inline int add_va_block(struct hl_device *hdev,
  * @size: requested block size.
  * @hint_addr: hint for requested address by the user.
  * @va_block_align: required alignment of the virtual block start address.
+ * @range_type: va range type (host, dram)
+ * @flags: additional memory flags, currently only uses HL_MEM_FORCE_HINT
  *
  * This function does the following:
  * - Iterate on the virtual block list to find a suitable virtual block for the
@@ -545,13 +574,19 @@ static inline int add_va_block(struct hl_device *hdev,
  */
 static u64 get_va_block(struct hl_device *hdev,
 				struct hl_va_range *va_range,
-				u64 size, u64 hint_addr, u32 va_block_align)
+				u64 size, u64 hint_addr, u32 va_block_align,
+				enum hl_va_range_type range_type,
+				u32 flags)
 {
 	struct hl_vm_va_block *va_block, *new_va_block = NULL;
+	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	u64 tmp_hint_addr, valid_start, valid_size, prev_start, prev_end,
-		align_mask, reserved_valid_start = 0, reserved_valid_size = 0;
+		align_mask, reserved_valid_start = 0, reserved_valid_size = 0,
+		dram_hint_mask = prop->dram_hints_align_mask;
 	bool add_prev = false;
 	bool is_align_pow_2  = is_power_of_2(va_range->page_size);
+	bool is_hint_dram_addr = hl_is_dram_va(hdev, hint_addr);
+	bool force_hint = flags & HL_MEM_FORCE_HINT;
 
 	if (is_align_pow_2)
 		align_mask = ~((u64)va_block_align - 1);
@@ -564,12 +599,20 @@ static u64 get_va_block(struct hl_device *hdev,
 		size = DIV_ROUND_UP_ULL(size, va_range->page_size) *
 							va_range->page_size;
 
-	tmp_hint_addr = hint_addr;
+	tmp_hint_addr = hint_addr & ~dram_hint_mask;
 
 	/* Check if we need to ignore hint address */
 	if ((is_align_pow_2 && (hint_addr & (va_block_align - 1))) ||
-			(!is_align_pow_2 &&
-				do_div(tmp_hint_addr, va_range->page_size))) {
+		(!is_align_pow_2 && is_hint_dram_addr &&
+			do_div(tmp_hint_addr, va_range->page_size))) {
+
+		if (force_hint) {
+			/* Hint must be respected, so here we just fail */
+			dev_err(hdev->dev,
+				"Hint address 0x%llx is not page aligned - cannot be respected\n",
+				hint_addr);
+			return 0;
+		}
 
 		dev_dbg(hdev->dev,
 			"Hint address 0x%llx will be ignored because it is not aligned\n",
@@ -596,6 +639,16 @@ static u64 get_va_block(struct hl_device *hdev,
 		if (valid_size < size)
 			continue;
 
+		/*
+		 * In case hint address is 0, and arc_hints_range_reservation
+		 * property enabled, then avoid allocating va blocks from the
+		 * range reserved for hint addresses
+		 */
+		if (prop->hints_range_reservation && !hint_addr)
+			if (is_hint_crossing_range(range_type, valid_start,
+					size, prop))
+				continue;
+
 		/* Pick the minimal length block which has the required size */
 		if (!new_va_block || (valid_size < reserved_valid_size)) {
 			new_va_block = va_block;
@@ -618,6 +671,17 @@ static u64 get_va_block(struct hl_device *hdev,
 		goto out;
 	}
 
+	if (force_hint && reserved_valid_start != hint_addr) {
+		/* Hint address must be respected. If we are here - this means
+		 * we could not respect it.
+		 */
+		dev_err(hdev->dev,
+			"Hint address 0x%llx could not be respected\n",
+			hint_addr);
+		reserved_valid_start = 0;
+		goto out;
+	}
+
 	/*
 	 * Check if there is some leftover range due to reserving the new
 	 * va block, then return it to the main virtual addresses list.
@@ -670,7 +734,8 @@ u64 hl_reserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
 		enum hl_va_range_type type, u32 size, u32 alignment)
 {
 	return get_va_block(hdev, ctx->va_range[type], size, 0,
-			max(alignment, ctx->va_range[type]->page_size));
+			max(alignment, ctx->va_range[type]->page_size),
+			type, 0);
 }
 
 /**
@@ -732,28 +797,15 @@ int hl_unreserve_va_block(struct hl_device *hdev, struct hl_ctx *ctx,
 }
 
 /**
- * get_sg_info() - get number of pages and the DMA address from SG list.
- * @sg: the SG list.
- * @dma_addr: pointer to DMA address to return.
- *
- * Calculate the number of consecutive pages described by the SG list. Take the
- * offset of the address in the first page, add to it the length and round it up
- * to the number of needed pages.
- */
-static u32 get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
-{
-	*dma_addr = sg_dma_address(sg);
-
-	return ((((*dma_addr) & (PAGE_SIZE - 1)) + sg_dma_len(sg)) +
-			(PAGE_SIZE - 1)) >> PAGE_SHIFT;
-}
-
-/**
  * init_phys_pg_pack_from_userptr() - initialize physical page pack from host
  *                                    memory
  * @ctx: pointer to the context structure.
  * @userptr: userptr to initialize from.
  * @pphys_pg_pack: result pointer.
+ * @force_regular_page: tell the function to ignore huge page optimization,
+ *                      even if possible. Needed for cases where the device VA
+ *                      is allocated before we know the composition of the
+ *                      physical pages
  *
  * This function does the following:
  * - Pin the physical pages related to the given virtual block.
@@ -762,17 +814,18 @@ static u32 get_sg_info(struct scatterlist *sg, dma_addr_t *dma_addr)
  */
 static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 				struct hl_userptr *userptr,
-				struct hl_vm_phys_pg_pack **pphys_pg_pack)
+				struct hl_vm_phys_pg_pack **pphys_pg_pack,
+				bool force_regular_page)
 {
+	u32 npages, page_size = PAGE_SIZE,
+		huge_page_size = ctx->hdev->asic_prop.pmmu_huge.page_size;
+	u32 pgs_in_huge_page = huge_page_size >> __ffs(page_size);
 	struct hl_vm_phys_pg_pack *phys_pg_pack;
+	bool first = true, is_huge_page_opt;
+	u64 page_mask, total_npages;
 	struct scatterlist *sg;
 	dma_addr_t dma_addr;
-	u64 page_mask, total_npages;
-	u32 npages, page_size = PAGE_SIZE,
-		huge_page_size = ctx->hdev->asic_prop.pmmu_huge.page_size;
-	bool first = true, is_huge_page_opt = true;
 	int rc, i, j;
-	u32 pgs_in_huge_page = huge_page_size >> __ffs(page_size);
 
 	phys_pg_pack = kzalloc(sizeof(*phys_pg_pack), GFP_KERNEL);
 	if (!phys_pg_pack)
@@ -783,6 +836,8 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 	phys_pg_pack->asid = ctx->asid;
 	atomic_set(&phys_pg_pack->mapping_cnt, 1);
 
+	is_huge_page_opt = (force_regular_page ? false : true);
+
 	/* Only if all dma_addrs are aligned to 2MB and their
 	 * sizes is at least 2MB, we can use huge page mapping.
 	 * We limit the 2MB optimization to this condition,
@@ -791,7 +846,7 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 	 */
 	total_npages = 0;
 	for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
-		npages = get_sg_info(sg, &dma_addr);
+		npages = hl_get_sg_info(sg, &dma_addr);
 
 		total_npages += npages;
 
@@ -820,7 +875,7 @@ static int init_phys_pg_pack_from_userptr(struct hl_ctx *ctx,
 
 	j = 0;
 	for_each_sg(userptr->sgt->sgl, sg, userptr->sgt->nents, i) {
-		npages = get_sg_info(sg, &dma_addr);
+		npages = hl_get_sg_info(sg, &dma_addr);
 
 		/* align down to physical page size and save the offset */
 		if (first) {
@@ -1001,11 +1056,12 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 	struct hl_userptr *userptr = NULL;
 	struct hl_vm_hash_node *hnode;
 	struct hl_va_range *va_range;
-	enum vm_type_t *vm_type;
+	enum vm_type *vm_type;
 	u64 ret_vaddr, hint_addr;
 	u32 handle = 0, va_block_align;
 	int rc;
 	bool is_userptr = args->flags & HL_MEM_USERPTR;
+	enum hl_va_range_type va_range_type = 0;
 
 	/* Assume failure */
 	*device_addr = 0;
@@ -1023,7 +1079,7 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 		}
 
 		rc = init_phys_pg_pack_from_userptr(ctx, userptr,
-				&phys_pg_pack);
+				&phys_pg_pack, false);
 		if (rc) {
 			dev_err(hdev->dev,
 				"unable to init page pack for vaddr 0x%llx\n",
@@ -1031,14 +1087,14 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 			goto init_page_pack_err;
 		}
 
-		vm_type = (enum vm_type_t *) userptr;
+		vm_type = (enum vm_type *) userptr;
 		hint_addr = args->map_host.hint_addr;
 		handle = phys_pg_pack->handle;
 
 		/* get required alignment */
 		if (phys_pg_pack->page_size == page_size) {
 			va_range = ctx->va_range[HL_VA_RANGE_TYPE_HOST];
-
+			va_range_type = HL_VA_RANGE_TYPE_HOST;
 			/*
 			 * huge page alignment may be needed in case of regular
 			 * page mapping, depending on the host VA alignment
@@ -1053,6 +1109,7 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 			 * mapping
 			 */
 			va_range = ctx->va_range[HL_VA_RANGE_TYPE_HOST_HUGE];
+			va_range_type = HL_VA_RANGE_TYPE_HOST_HUGE;
 			va_block_align = huge_page_size;
 		}
 	} else {
@@ -1072,12 +1129,13 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 
 		spin_unlock(&vm->idr_lock);
 
-		vm_type = (enum vm_type_t *) phys_pg_pack;
+		vm_type = (enum vm_type *) phys_pg_pack;
 
 		hint_addr = args->map_device.hint_addr;
 
 		/* DRAM VA alignment is the same as the MMU page size */
 		va_range = ctx->va_range[HL_VA_RANGE_TYPE_DRAM];
+		va_range_type = HL_VA_RANGE_TYPE_DRAM;
 		va_block_align = hdev->asic_prop.dmmu.page_size;
 	}
 
@@ -1100,8 +1158,23 @@ static int map_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 		goto hnode_err;
 	}
 
+	if (hint_addr && phys_pg_pack->offset) {
+		if (args->flags & HL_MEM_FORCE_HINT) {
+			/* Fail if hint must be respected but it can't be */
+			dev_err(hdev->dev,
+				"Hint address 0x%llx cannot be respected because source memory is not aligned 0x%x\n",
+				hint_addr, phys_pg_pack->offset);
+			rc = -EINVAL;
+			goto va_block_err;
+		}
+		dev_dbg(hdev->dev,
+			"Hint address 0x%llx will be ignored because source memory is not aligned 0x%x\n",
+			hint_addr, phys_pg_pack->offset);
+	}
+
 	ret_vaddr = get_va_block(hdev, va_range, phys_pg_pack->total_size,
-					hint_addr, va_block_align);
+					hint_addr, va_block_align,
+					va_range_type, args->flags);
 	if (!ret_vaddr) {
 		dev_err(hdev->dev, "no available va block for handle %u\n",
 				handle);
@@ -1181,17 +1254,19 @@ init_page_pack_err:
 static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 				bool ctx_free)
 {
-	struct hl_device *hdev = ctx->hdev;
-	struct asic_fixed_properties *prop = &hdev->asic_prop;
 	struct hl_vm_phys_pg_pack *phys_pg_pack = NULL;
+	u64 vaddr = args->unmap.device_virt_addr;
 	struct hl_vm_hash_node *hnode = NULL;
+	struct asic_fixed_properties *prop;
+	struct hl_device *hdev = ctx->hdev;
 	struct hl_userptr *userptr = NULL;
 	struct hl_va_range *va_range;
-	u64 vaddr = args->unmap.device_virt_addr;
-	enum vm_type_t *vm_type;
+	enum vm_type *vm_type;
 	bool is_userptr;
 	int rc = 0;
 
+	prop = &hdev->asic_prop;
+
 	/* protect from double entrance */
 	mutex_lock(&ctx->mem_hash_lock);
 	hash_for_each_possible(ctx->mem_hash, hnode, node, (unsigned long)vaddr)
@@ -1214,8 +1289,9 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 	if (*vm_type == VM_TYPE_USERPTR) {
 		is_userptr = true;
 		userptr = hnode->ptr;
-		rc = init_phys_pg_pack_from_userptr(ctx, userptr,
-							&phys_pg_pack);
+
+		rc = init_phys_pg_pack_from_userptr(ctx, userptr, &phys_pg_pack,
+							false);
 		if (rc) {
 			dev_err(hdev->dev,
 				"unable to init page pack for vaddr 0x%llx\n",
@@ -1299,7 +1375,7 @@ static int unmap_device_va(struct hl_ctx *ctx, struct hl_mem_in *args,
 	kfree(hnode);
 
 	if (is_userptr) {
-		rc = free_phys_pg_pack(hdev, phys_pg_pack);
+		free_phys_pg_pack(hdev, phys_pg_pack);
 		dma_unmap_host_va(hdev, userptr);
 	}
 
@@ -1669,6 +1745,7 @@ int hl_pin_host_memory(struct hl_device *hdev, u64 addr, u64 size,
 		return -EINVAL;
 	}
 
+	userptr->pid = current->pid;
 	userptr->sgt = kzalloc(sizeof(*userptr->sgt), GFP_KERNEL);
 	if (!userptr->sgt)
 		return -ENOMEM;
@@ -2033,7 +2110,7 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
 	 * another side effect error
 	 */
 	if (!hdev->hard_reset_pending && !hash_empty(ctx->mem_hash))
-		dev_notice(hdev->dev,
+		dev_dbg(hdev->dev,
 			"user released device without removing its memory mappings\n");
 
 	hash_for_each_safe(ctx->mem_hash, i, tmp_node, hnode, node) {
diff --git a/drivers/misc/habanalabs/common/mmu/mmu_v1.c b/drivers/misc/habanalabs/common/mmu/mmu_v1.c
index c5e93ff32586..0f536f79dd9c 100644
--- a/drivers/misc/habanalabs/common/mmu/mmu_v1.c
+++ b/drivers/misc/habanalabs/common/mmu/mmu_v1.c
@@ -470,13 +470,13 @@ static void hl_mmu_v1_fini(struct hl_device *hdev)
 	if (!ZERO_OR_NULL_PTR(hdev->mmu_priv.hr.mmu_shadow_hop0)) {
 		kvfree(hdev->mmu_priv.dr.mmu_shadow_hop0);
 		gen_pool_destroy(hdev->mmu_priv.dr.mmu_pgt_pool);
-	}
 
-	/* Make sure that if we arrive here again without init was called we
-	 * won't cause kernel panic. This can happen for example if we fail
-	 * during hard reset code at certain points
-	 */
-	hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
+		/* Make sure that if we arrive here again without init was
+		 * called we won't cause kernel panic. This can happen for
+		 * example if we fail during hard reset code at certain points
+		 */
+		hdev->mmu_priv.dr.mmu_shadow_hop0 = NULL;
+	}
 }
 
 /**
diff --git a/drivers/misc/habanalabs/common/pci/pci.c b/drivers/misc/habanalabs/common/pci/pci.c
index d5bedf5ba011..0b5366cc84fd 100644
--- a/drivers/misc/habanalabs/common/pci/pci.c
+++ b/drivers/misc/habanalabs/common/pci/pci.c
@@ -436,6 +436,8 @@ int hl_pci_init(struct hl_device *hdev)
 		goto unmap_pci_bars;
 	}
 
+	dma_set_max_seg_size(&pdev->dev, U32_MAX);
+
 	return 0;
 
 unmap_pci_bars:
diff --git a/drivers/misc/habanalabs/common/state_dump.c b/drivers/misc/habanalabs/common/state_dump.c
new file mode 100644
index 000000000000..74726907c95e
--- /dev/null
+++ b/drivers/misc/habanalabs/common/state_dump.c
@@ -0,0 +1,718 @@
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Copyright 2021 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ */
+
+#include <linux/vmalloc.h>
+#include <uapi/misc/habanalabs.h>
+#include "habanalabs.h"
+
+/**
+ * hl_format_as_binary - helper function, format an integer as binary
+ *                       using supplied scratch buffer
+ * @buf: the buffer to use
+ * @buf_len: buffer capacity
+ * @n: number to format
+ *
+ * Returns pointer to buffer
+ */
+char *hl_format_as_binary(char *buf, size_t buf_len, u32 n)
+{
+	int i;
+	u32 bit;
+	bool leading0 = true;
+	char *wrptr = buf;
+
+	if (buf_len > 0 && buf_len < 3) {
+		*wrptr = '\0';
+		return buf;
+	}
+
+	wrptr[0] = '0';
+	wrptr[1] = 'b';
+	wrptr += 2;
+	/* Remove 3 characters from length for '0b' and '\0' termination */
+	buf_len -= 3;
+
+	for (i = 0; i < sizeof(n) * BITS_PER_BYTE && buf_len; ++i, n <<= 1) {
+		/* Writing bit calculation in one line would cause a false
+		 * positive static code analysis error, so splitting.
+		 */
+		bit = n & (1 << (sizeof(n) * BITS_PER_BYTE - 1));
+		bit = !!bit;
+		leading0 &= !bit;
+		if (!leading0) {
+			*wrptr = '0' + bit;
+			++wrptr;
+		}
+	}
+
+	*wrptr = '\0';
+
+	return buf;
+}
+
+/**
+ * resize_to_fit - helper function, resize buffer to fit given amount of data
+ * @buf: destination buffer double pointer
+ * @size: pointer to the size container
+ * @desired_size: size the buffer must contain
+ *
+ * Returns 0 on success or error code on failure.
+ * On success, the size of buffer is at least desired_size. Buffer is allocated
+ * via vmalloc and must be freed with vfree.
+ */
+static int resize_to_fit(char **buf, size_t *size, size_t desired_size)
+{
+	char *resized_buf;
+	size_t new_size;
+
+	if (*size >= desired_size)
+		return 0;
+
+	/* Not enough space to print all, have to resize */
+	new_size = max_t(size_t, PAGE_SIZE, round_up(desired_size, PAGE_SIZE));
+	resized_buf = vmalloc(new_size);
+	if (!resized_buf)
+		return -ENOMEM;
+	memcpy(resized_buf, *buf, *size);
+	vfree(*buf);
+	*buf = resized_buf;
+	*size = new_size;
+
+	return 1;
+}
+
+/**
+ * hl_snprintf_resize() - print formatted data to buffer, resize as needed
+ * @buf: buffer double pointer, to be written to and resized, must be either
+ *       NULL or allocated with vmalloc.
+ * @size: current size of the buffer
+ * @offset: current offset to write to
+ * @format: format of the data
+ *
+ * This function will write formatted data into the buffer. If buffer is not
+ * large enough, it will be resized using vmalloc. Size may be modified if the
+ * buffer was resized, offset will be advanced by the number of bytes written
+ * not including the terminating character
+ *
+ * Returns 0 on success or error code on failure
+ *
+ * Note that the buffer has to be manually released using vfree.
+ */
+int hl_snprintf_resize(char **buf, size_t *size, size_t *offset,
+			   const char *format, ...)
+{
+	va_list args;
+	size_t length;
+	int rc;
+
+	if (*buf == NULL && (*size != 0 || *offset != 0))
+		return -EINVAL;
+
+	va_start(args, format);
+	length = vsnprintf(*buf + *offset, *size - *offset, format, args);
+	va_end(args);
+
+	rc = resize_to_fit(buf, size, *offset + length + 1);
+	if (rc < 0)
+		return rc;
+	else if (rc > 0) {
+		/* Resize was needed, write again */
+		va_start(args, format);
+		length = vsnprintf(*buf + *offset, *size - *offset, format,
+				   args);
+		va_end(args);
+	}
+
+	*offset += length;
+
+	return 0;
+}
+
+/**
+ * hl_sync_engine_to_string - convert engine type enum to string literal
+ * @engine_type: engine type (TPC/MME/DMA)
+ *
+ * Return the resolved string literal
+ */
+const char *hl_sync_engine_to_string(enum hl_sync_engine_type engine_type)
+{
+	switch (engine_type) {
+	case ENGINE_DMA:
+		return "DMA";
+	case ENGINE_MME:
+		return "MME";
+	case ENGINE_TPC:
+		return "TPC";
+	}
+	return "Invalid Engine Type";
+}
+
+/**
+ * hl_print_resize_sync_engine - helper function, format engine name and ID
+ * using hl_snprintf_resize
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ * @engine_type: engine type (TPC/MME/DMA)
+ * @engine_id: engine numerical id
+ *
+ * Returns 0 on success or error code on failure
+ */
+static int hl_print_resize_sync_engine(char **buf, size_t *size, size_t *offset,
+				enum hl_sync_engine_type engine_type,
+				u32 engine_id)
+{
+	return hl_snprintf_resize(buf, size, offset, "%s%u",
+			hl_sync_engine_to_string(engine_type), engine_id);
+}
+
+/**
+ * hl_state_dump_get_sync_name - transform sync object id to name if available
+ * @hdev: pointer to the device
+ * @sync_id: sync object id
+ *
+ * Returns a name literal or NULL if not resolved.
+ * Note: returning NULL shall not be considered as a failure, as not all
+ * sync objects are named.
+ */
+const char *hl_state_dump_get_sync_name(struct hl_device *hdev, u32 sync_id)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct hl_hw_obj_name_entry *entry;
+
+	hash_for_each_possible(sds->so_id_to_str_tb, entry,
+				node, sync_id)
+		if (sync_id == entry->id)
+			return entry->name;
+
+	return NULL;
+}
+
+/**
+ * hl_state_dump_get_monitor_name - transform monitor object dump to monitor
+ * name if available
+ * @hdev: pointer to the device
+ * @mon: monitor state dump
+ *
+ * Returns a name literal or NULL if not resolved.
+ * Note: returning NULL shall not be considered as a failure, as not all
+ * monitors are named.
+ */
+const char *hl_state_dump_get_monitor_name(struct hl_device *hdev,
+					struct hl_mon_state_dump *mon)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct hl_hw_obj_name_entry *entry;
+
+	hash_for_each_possible(sds->monitor_id_to_str_tb,
+				entry, node, mon->id)
+		if (mon->id == entry->id)
+			return entry->name;
+
+	return NULL;
+}
+
+/**
+ * hl_state_dump_free_sync_to_engine_map - free sync object to engine map
+ * @map: sync object to engine map
+ *
+ * Note: generic free implementation, the allocation is implemented per ASIC.
+ */
+void hl_state_dump_free_sync_to_engine_map(struct hl_sync_to_engine_map *map)
+{
+	struct hl_sync_to_engine_map_entry *entry;
+	struct hlist_node *tmp_node;
+	int i;
+
+	hash_for_each_safe(map->tb, i, tmp_node, entry, node) {
+		hash_del(&entry->node);
+		kfree(entry);
+	}
+}
+
+/**
+ * hl_state_dump_get_sync_to_engine - transform sync_id to
+ * hl_sync_to_engine_map_entry if available for current id
+ * @map: sync object to engine map
+ * @sync_id: sync object id
+ *
+ * Returns the translation entry if found or NULL if not.
+ * Note, returned NULL shall not be considered as a failure as the map
+ * does not cover all possible, it is a best effort sync ids.
+ */
+static struct hl_sync_to_engine_map_entry *
+hl_state_dump_get_sync_to_engine(struct hl_sync_to_engine_map *map, u32 sync_id)
+{
+	struct hl_sync_to_engine_map_entry *entry;
+
+	hash_for_each_possible(map->tb, entry, node, sync_id)
+		if (entry->sync_id == sync_id)
+			return entry;
+	return NULL;
+}
+
+/**
+ * hl_state_dump_read_sync_objects - read sync objects array
+ * @hdev: pointer to the device
+ * @index: sync manager block index starting with E_N
+ *
+ * Returns array of size SP_SYNC_OBJ_AMOUNT on success or NULL on failure
+ */
+static u32 *hl_state_dump_read_sync_objects(struct hl_device *hdev, u32 index)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	u32 *sync_objects;
+	s64 base_addr; /* Base addr can be negative */
+	int i;
+
+	base_addr = sds->props[SP_SYNC_OBJ_BASE_ADDR] +
+			sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index;
+
+	sync_objects = vmalloc(sds->props[SP_SYNC_OBJ_AMOUNT] * sizeof(u32));
+	if (!sync_objects)
+		return NULL;
+
+	for (i = 0; i < sds->props[SP_SYNC_OBJ_AMOUNT]; ++i)
+		sync_objects[i] = RREG32(base_addr + i * sizeof(u32));
+
+	return sync_objects;
+}
+
+/**
+ * hl_state_dump_free_sync_objects - free sync objects array allocated by
+ * hl_state_dump_read_sync_objects
+ * @sync_objects: sync objects array
+ */
+static void hl_state_dump_free_sync_objects(u32 *sync_objects)
+{
+	vfree(sync_objects);
+}
+
+
+/**
+ * hl_state_dump_print_syncs_single_block - print active sync objects on a
+ * single block
+ * @hdev: pointer to the device
+ * @index: sync manager block index starting with E_N
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ * @map: sync engines names map
+ *
+ * Returns 0 on success or error code on failure
+ */
+static int
+hl_state_dump_print_syncs_single_block(struct hl_device *hdev, u32 index,
+				char **buf, size_t *size, size_t *offset,
+				struct hl_sync_to_engine_map *map)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	const char *sync_name;
+	u32 *sync_objects = NULL;
+	int rc = 0, i;
+
+	if (sds->sync_namager_names) {
+		rc = hl_snprintf_resize(
+			buf, size, offset, "%s\n",
+			sds->sync_namager_names[index]);
+		if (rc)
+			goto out;
+	}
+
+	sync_objects = hl_state_dump_read_sync_objects(hdev, index);
+	if (!sync_objects) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < sds->props[SP_SYNC_OBJ_AMOUNT]; ++i) {
+		struct hl_sync_to_engine_map_entry *entry;
+		u64 sync_object_addr;
+
+		if (!sync_objects[i])
+			continue;
+
+		sync_object_addr = sds->props[SP_SYNC_OBJ_BASE_ADDR] +
+				sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index +
+				i * sizeof(u32);
+
+		rc = hl_snprintf_resize(buf, size, offset, "sync id: %u", i);
+		if (rc)
+			goto free_sync_objects;
+		sync_name = hl_state_dump_get_sync_name(hdev, i);
+		if (sync_name) {
+			rc = hl_snprintf_resize(buf, size, offset, " %s",
+						sync_name);
+			if (rc)
+				goto free_sync_objects;
+		}
+		rc = hl_snprintf_resize(buf, size, offset, ", value: %u",
+					sync_objects[i]);
+		if (rc)
+			goto free_sync_objects;
+
+		/* Append engine string */
+		entry = hl_state_dump_get_sync_to_engine(map,
+			(u32)sync_object_addr);
+		if (entry) {
+			rc = hl_snprintf_resize(buf, size, offset,
+						", Engine: ");
+			if (rc)
+				goto free_sync_objects;
+			rc = hl_print_resize_sync_engine(buf, size, offset,
+						entry->engine_type,
+						entry->engine_id);
+			if (rc)
+				goto free_sync_objects;
+		}
+
+		rc = hl_snprintf_resize(buf, size, offset, "\n");
+		if (rc)
+			goto free_sync_objects;
+	}
+
+free_sync_objects:
+	hl_state_dump_free_sync_objects(sync_objects);
+out:
+	return rc;
+}
+
+/**
+ * hl_state_dump_print_syncs - print active sync objects
+ * @hdev: pointer to the device
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ *
+ * Returns 0 on success or error code on failure
+ */
+static int hl_state_dump_print_syncs(struct hl_device *hdev,
+					char **buf, size_t *size,
+					size_t *offset)
+
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct hl_sync_to_engine_map *map;
+	u32 index;
+	int rc = 0;
+
+	map = kzalloc(sizeof(*map), GFP_KERNEL);
+	if (!map)
+		return -ENOMEM;
+
+	rc = sds->funcs.gen_sync_to_engine_map(hdev, map);
+	if (rc)
+		goto free_map_mem;
+
+	rc = hl_snprintf_resize(buf, size, offset, "Non zero sync objects:\n");
+	if (rc)
+		goto out;
+
+	if (sds->sync_namager_names) {
+		for (index = 0; sds->sync_namager_names[index]; ++index) {
+			rc = hl_state_dump_print_syncs_single_block(
+				hdev, index, buf, size, offset, map);
+			if (rc)
+				goto out;
+		}
+	} else {
+		for (index = 0; index < sds->props[SP_NUM_CORES]; ++index) {
+			rc = hl_state_dump_print_syncs_single_block(
+				hdev, index, buf, size, offset, map);
+			if (rc)
+				goto out;
+		}
+	}
+
+out:
+	hl_state_dump_free_sync_to_engine_map(map);
+free_map_mem:
+	kfree(map);
+
+	return rc;
+}
+
+/**
+ * hl_state_dump_alloc_read_sm_block_monitors - read monitors for a specific
+ * block
+ * @hdev: pointer to the device
+ * @index: sync manager block index starting with E_N
+ *
+ * Returns an array of monitor data of size SP_MONITORS_AMOUNT or NULL
+ * on error
+ */
+static struct hl_mon_state_dump *
+hl_state_dump_alloc_read_sm_block_monitors(struct hl_device *hdev, u32 index)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct hl_mon_state_dump *monitors;
+	s64 base_addr; /* Base addr can be negative */
+	int i;
+
+	monitors = vmalloc(sds->props[SP_MONITORS_AMOUNT] *
+			   sizeof(struct hl_mon_state_dump));
+	if (!monitors)
+		return NULL;
+
+	base_addr = sds->props[SP_NEXT_SYNC_OBJ_ADDR] * index;
+
+	for (i = 0; i < sds->props[SP_MONITORS_AMOUNT]; ++i) {
+		monitors[i].id = i;
+		monitors[i].wr_addr_low =
+			RREG32(base_addr + sds->props[SP_MON_OBJ_WR_ADDR_LOW] +
+				i * sizeof(u32));
+
+		monitors[i].wr_addr_high =
+			RREG32(base_addr + sds->props[SP_MON_OBJ_WR_ADDR_HIGH] +
+				i * sizeof(u32));
+
+		monitors[i].wr_data =
+			RREG32(base_addr + sds->props[SP_MON_OBJ_WR_DATA] +
+				i * sizeof(u32));
+
+		monitors[i].arm_data =
+			RREG32(base_addr + sds->props[SP_MON_OBJ_ARM_DATA] +
+				i * sizeof(u32));
+
+		monitors[i].status =
+			RREG32(base_addr + sds->props[SP_MON_OBJ_STATUS] +
+				i * sizeof(u32));
+	}
+
+	return monitors;
+}
+
+/**
+ * hl_state_dump_free_monitors - free the monitors structure
+ * @monitors: monitors array created with
+ *            hl_state_dump_alloc_read_sm_block_monitors
+ */
+static void hl_state_dump_free_monitors(struct hl_mon_state_dump *monitors)
+{
+	vfree(monitors);
+}
+
+/**
+ * hl_state_dump_print_monitors_single_block - print active monitors on a
+ * single block
+ * @hdev: pointer to the device
+ * @index: sync manager block index starting with E_N
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ *
+ * Returns 0 on success or error code on failure
+ */
+static int hl_state_dump_print_monitors_single_block(struct hl_device *hdev,
+						u32 index,
+						char **buf, size_t *size,
+						size_t *offset)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct hl_mon_state_dump *monitors = NULL;
+	int rc = 0, i;
+
+	if (sds->sync_namager_names) {
+		rc = hl_snprintf_resize(
+			buf, size, offset, "%s\n",
+			sds->sync_namager_names[index]);
+		if (rc)
+			goto out;
+	}
+
+	monitors = hl_state_dump_alloc_read_sm_block_monitors(hdev, index);
+	if (!monitors) {
+		rc = -ENOMEM;
+		goto out;
+	}
+
+	for (i = 0; i < sds->props[SP_MONITORS_AMOUNT]; ++i) {
+		if (!(sds->funcs.monitor_valid(&monitors[i])))
+			continue;
+
+		/* Monitor is valid, dump it */
+		rc = sds->funcs.print_single_monitor(buf, size, offset, hdev,
+							&monitors[i]);
+		if (rc)
+			goto free_monitors;
+
+		hl_snprintf_resize(buf, size, offset, "\n");
+	}
+
+free_monitors:
+	hl_state_dump_free_monitors(monitors);
+out:
+	return rc;
+}
+
+/**
+ * hl_state_dump_print_monitors - print active monitors
+ * @hdev: pointer to the device
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ *
+ * Returns 0 on success or error code on failure
+ */
+static int hl_state_dump_print_monitors(struct hl_device *hdev,
+					char **buf, size_t *size,
+					size_t *offset)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	u32 index;
+	int rc = 0;
+
+	rc = hl_snprintf_resize(buf, size, offset,
+		"Valid (armed) monitor objects:\n");
+	if (rc)
+		goto out;
+
+	if (sds->sync_namager_names) {
+		for (index = 0; sds->sync_namager_names[index]; ++index) {
+			rc = hl_state_dump_print_monitors_single_block(
+				hdev, index, buf, size, offset);
+			if (rc)
+				goto out;
+		}
+	} else {
+		for (index = 0; index < sds->props[SP_NUM_CORES]; ++index) {
+			rc = hl_state_dump_print_monitors_single_block(
+				hdev, index, buf, size, offset);
+			if (rc)
+				goto out;
+		}
+	}
+
+out:
+	return rc;
+}
+
+/**
+ * hl_state_dump_print_engine_fences - print active fences for a specific
+ * engine
+ * @hdev: pointer to the device
+ * @engine_type: engine type to use
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ */
+static int
+hl_state_dump_print_engine_fences(struct hl_device *hdev,
+				  enum hl_sync_engine_type engine_type,
+				  char **buf, size_t *size, size_t *offset)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	int rc = 0, i, n_fences;
+	u64 base_addr, next_fence;
+
+	switch (engine_type) {
+	case ENGINE_TPC:
+		n_fences = sds->props[SP_NUM_OF_TPC_ENGINES];
+		base_addr = sds->props[SP_TPC0_CMDQ];
+		next_fence = sds->props[SP_NEXT_TPC];
+		break;
+	case ENGINE_MME:
+		n_fences = sds->props[SP_NUM_OF_MME_ENGINES];
+		base_addr = sds->props[SP_MME_CMDQ];
+		next_fence = sds->props[SP_NEXT_MME];
+		break;
+	case ENGINE_DMA:
+		n_fences = sds->props[SP_NUM_OF_DMA_ENGINES];
+		base_addr = sds->props[SP_DMA_CMDQ];
+		next_fence = sds->props[SP_DMA_QUEUES_OFFSET];
+		break;
+	default:
+		return -EINVAL;
+	}
+	for (i = 0; i < n_fences; ++i) {
+		rc = sds->funcs.print_fences_single_engine(
+			hdev,
+			base_addr + next_fence * i +
+				sds->props[SP_FENCE0_CNT_OFFSET],
+			base_addr + next_fence * i +
+				sds->props[SP_CP_STS_OFFSET],
+			engine_type, i, buf, size, offset);
+		if (rc)
+			goto out;
+	}
+out:
+	return rc;
+}
+
+/**
+ * hl_state_dump_print_fences - print active fences
+ * @hdev: pointer to the device
+ * @buf: destination buffer double pointer to be used with hl_snprintf_resize
+ * @size: pointer to the size container
+ * @offset: pointer to the offset container
+ */
+static int hl_state_dump_print_fences(struct hl_device *hdev, char **buf,
+				      size_t *size, size_t *offset)
+{
+	int rc = 0;
+
+	rc = hl_snprintf_resize(buf, size, offset, "Valid (armed) fences:\n");
+	if (rc)
+		goto out;
+
+	rc = hl_state_dump_print_engine_fences(hdev, ENGINE_TPC, buf, size, offset);
+	if (rc)
+		goto out;
+
+	rc = hl_state_dump_print_engine_fences(hdev, ENGINE_MME, buf, size, offset);
+	if (rc)
+		goto out;
+
+	rc = hl_state_dump_print_engine_fences(hdev, ENGINE_DMA, buf, size, offset);
+	if (rc)
+		goto out;
+
+out:
+	return rc;
+}
+
+/**
+ * hl_state_dump() - dump system state
+ * @hdev: pointer to device structure
+ */
+int hl_state_dump(struct hl_device *hdev)
+{
+	char *buf = NULL;
+	size_t offset = 0, size = 0;
+	int rc;
+
+	rc = hl_snprintf_resize(&buf, &size, &offset,
+				"Timestamp taken on: %llu\n\n",
+				ktime_to_ns(ktime_get()));
+	if (rc)
+		goto err;
+
+	rc = hl_state_dump_print_syncs(hdev, &buf, &size, &offset);
+	if (rc)
+		goto err;
+
+	hl_snprintf_resize(&buf, &size, &offset, "\n");
+
+	rc = hl_state_dump_print_monitors(hdev, &buf, &size, &offset);
+	if (rc)
+		goto err;
+
+	hl_snprintf_resize(&buf, &size, &offset, "\n");
+
+	rc = hl_state_dump_print_fences(hdev, &buf, &size, &offset);
+	if (rc)
+		goto err;
+
+	hl_snprintf_resize(&buf, &size, &offset, "\n");
+
+	hl_debugfs_set_state_dump(hdev, buf, size);
+
+	return 0;
+err:
+	vfree(buf);
+	return rc;
+}
diff --git a/drivers/misc/habanalabs/common/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c
index db72df282ef8..34f9f2779962 100644
--- a/drivers/misc/habanalabs/common/sysfs.c
+++ b/drivers/misc/habanalabs/common/sysfs.c
@@ -9,8 +9,7 @@
 
 #include <linux/pci.h>
 
-long hl_get_frequency(struct hl_device *hdev, u32 pll_index,
-								bool curr)
+long hl_get_frequency(struct hl_device *hdev, u32 pll_index, bool curr)
 {
 	struct cpucp_packet pkt;
 	u32 used_pll_idx;
@@ -44,8 +43,7 @@ long hl_get_frequency(struct hl_device *hdev, u32 pll_index,
 	return (long) result;
 }
 
-void hl_set_frequency(struct hl_device *hdev, u32 pll_index,
-								u64 freq)
+void hl_set_frequency(struct hl_device *hdev, u32 pll_index, u64 freq)
 {
 	struct cpucp_packet pkt;
 	u32 used_pll_idx;
@@ -285,16 +283,12 @@ static ssize_t status_show(struct device *dev, struct device_attribute *attr,
 				char *buf)
 {
 	struct hl_device *hdev = dev_get_drvdata(dev);
-	char *str;
+	char str[HL_STR_MAX];
 
-	if (atomic_read(&hdev->in_reset))
-		str = "In reset";
-	else if (hdev->disabled)
-		str = "Malfunction";
-	else if (hdev->needs_reset)
-		str = "Needs Reset";
-	else
-		str = "Operational";
+	strscpy(str, hdev->status[hl_device_status(hdev)], HL_STR_MAX);
+
+	/* use uppercase for backward compatibility */
+	str[0] = 'A' + (str[0] - 'a');
 
 	return sprintf(buf, "%s\n", str);
 }
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index aa8a0ca5aca2..383865be3c2c 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -76,7 +76,7 @@
 #define GAUDI_PLDM_MMU_TIMEOUT_USEC	(MMU_CONFIG_TIMEOUT_USEC * 100)
 #define GAUDI_PLDM_QMAN0_TIMEOUT_USEC	(HL_DEVICE_TIMEOUT_USEC * 30)
 #define GAUDI_PLDM_TPC_KERNEL_WAIT_USEC	(HL_DEVICE_TIMEOUT_USEC * 30)
-#define GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC	1000000		/* 1s */
+#define GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC	4000000		/* 4s */
 #define GAUDI_MSG_TO_CPU_TIMEOUT_USEC	4000000		/* 4s */
 #define GAUDI_WAIT_FOR_BL_TIMEOUT_USEC	15000000	/* 15s */
 
@@ -106,6 +106,21 @@
 
 #define GAUDI_PLL_MAX 10
 
+#define BIN_REG_STRING_SIZE	sizeof("0b10101010101010101010101010101010")
+
+#define MONITOR_SOB_STRING_SIZE		256
+
+static u32 gaudi_stream_master[GAUDI_STREAM_MASTER_ARR_SIZE] = {
+	GAUDI_QUEUE_ID_DMA_0_0,
+	GAUDI_QUEUE_ID_DMA_0_1,
+	GAUDI_QUEUE_ID_DMA_0_2,
+	GAUDI_QUEUE_ID_DMA_0_3,
+	GAUDI_QUEUE_ID_DMA_1_0,
+	GAUDI_QUEUE_ID_DMA_1_1,
+	GAUDI_QUEUE_ID_DMA_1_2,
+	GAUDI_QUEUE_ID_DMA_1_3
+};
+
 static const char gaudi_irq_name[GAUDI_MSI_ENTRIES][GAUDI_MAX_STRING_LEN] = {
 		"gaudi cq 0_0", "gaudi cq 0_1", "gaudi cq 0_2", "gaudi cq 0_3",
 		"gaudi cq 1_0", "gaudi cq 1_1", "gaudi cq 1_2", "gaudi cq 1_3",
@@ -348,6 +363,97 @@ static enum hl_queue_type gaudi_queue_type[GAUDI_QUEUE_ID_SIZE] = {
 	QUEUE_TYPE_INT, /* GAUDI_QUEUE_ID_NIC_9_3 */
 };
 
+static struct hl_hw_obj_name_entry gaudi_so_id_to_str[] = {
+	{ .id = 0,  .name = "SYNC_OBJ_DMA_DOWN_FEEDBACK" },
+	{ .id = 1,  .name = "SYNC_OBJ_DMA_UP_FEEDBACK" },
+	{ .id = 2,  .name = "SYNC_OBJ_DMA_STATIC_DRAM_SRAM_FEEDBACK" },
+	{ .id = 3,  .name = "SYNC_OBJ_DMA_SRAM_DRAM_FEEDBACK" },
+	{ .id = 4,  .name = "SYNC_OBJ_FIRST_COMPUTE_FINISH" },
+	{ .id = 5,  .name = "SYNC_OBJ_HOST_DRAM_DONE" },
+	{ .id = 6,  .name = "SYNC_OBJ_DBG_CTR_DEPRECATED" },
+	{ .id = 7,  .name = "SYNC_OBJ_DMA_ACTIVATIONS_DRAM_SRAM_FEEDBACK" },
+	{ .id = 8,  .name = "SYNC_OBJ_ENGINE_SEM_MME_0" },
+	{ .id = 9,  .name = "SYNC_OBJ_ENGINE_SEM_MME_1" },
+	{ .id = 10, .name = "SYNC_OBJ_ENGINE_SEM_TPC_0" },
+	{ .id = 11, .name = "SYNC_OBJ_ENGINE_SEM_TPC_1" },
+	{ .id = 12, .name = "SYNC_OBJ_ENGINE_SEM_TPC_2" },
+	{ .id = 13, .name = "SYNC_OBJ_ENGINE_SEM_TPC_3" },
+	{ .id = 14, .name = "SYNC_OBJ_ENGINE_SEM_TPC_4" },
+	{ .id = 15, .name = "SYNC_OBJ_ENGINE_SEM_TPC_5" },
+	{ .id = 16, .name = "SYNC_OBJ_ENGINE_SEM_TPC_6" },
+	{ .id = 17, .name = "SYNC_OBJ_ENGINE_SEM_TPC_7" },
+	{ .id = 18, .name = "SYNC_OBJ_ENGINE_SEM_DMA_1" },
+	{ .id = 19, .name = "SYNC_OBJ_ENGINE_SEM_DMA_2" },
+	{ .id = 20, .name = "SYNC_OBJ_ENGINE_SEM_DMA_3" },
+	{ .id = 21, .name = "SYNC_OBJ_ENGINE_SEM_DMA_4" },
+	{ .id = 22, .name = "SYNC_OBJ_ENGINE_SEM_DMA_5" },
+	{ .id = 23, .name = "SYNC_OBJ_ENGINE_SEM_DMA_6" },
+	{ .id = 24, .name = "SYNC_OBJ_ENGINE_SEM_DMA_7" },
+	{ .id = 25, .name = "SYNC_OBJ_DBG_CTR_0" },
+	{ .id = 26, .name = "SYNC_OBJ_DBG_CTR_1" },
+};
+
+static struct hl_hw_obj_name_entry gaudi_monitor_id_to_str[] = {
+	{ .id = 200, .name = "MON_OBJ_DMA_DOWN_FEEDBACK_RESET" },
+	{ .id = 201, .name = "MON_OBJ_DMA_UP_FEADBACK_RESET" },
+	{ .id = 203, .name = "MON_OBJ_DRAM_TO_SRAM_QUEUE_FENCE" },
+	{ .id = 204, .name = "MON_OBJ_TPC_0_CLK_GATE" },
+	{ .id = 205, .name = "MON_OBJ_TPC_1_CLK_GATE" },
+	{ .id = 206, .name = "MON_OBJ_TPC_2_CLK_GATE" },
+	{ .id = 207, .name = "MON_OBJ_TPC_3_CLK_GATE" },
+	{ .id = 208, .name = "MON_OBJ_TPC_4_CLK_GATE" },
+	{ .id = 209, .name = "MON_OBJ_TPC_5_CLK_GATE" },
+	{ .id = 210, .name = "MON_OBJ_TPC_6_CLK_GATE" },
+	{ .id = 211, .name = "MON_OBJ_TPC_7_CLK_GATE" },
+};
+
+static s64 gaudi_state_dump_specs_props[] = {
+	[SP_SYNC_OBJ_BASE_ADDR] = mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_0,
+	[SP_NEXT_SYNC_OBJ_ADDR] = NEXT_SYNC_OBJ_ADDR_INTERVAL,
+	[SP_SYNC_OBJ_AMOUNT] = NUM_OF_SOB_IN_BLOCK,
+	[SP_MON_OBJ_WR_ADDR_LOW] =
+		mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0,
+	[SP_MON_OBJ_WR_ADDR_HIGH] =
+		mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRH_0,
+	[SP_MON_OBJ_WR_DATA] = mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_DATA_0,
+	[SP_MON_OBJ_ARM_DATA] = mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_ARM_0,
+	[SP_MON_OBJ_STATUS] = mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_0,
+	[SP_MONITORS_AMOUNT] = NUM_OF_MONITORS_IN_BLOCK,
+	[SP_TPC0_CMDQ] = mmTPC0_QM_GLBL_CFG0,
+	[SP_TPC0_CFG_SO] = mmTPC0_CFG_QM_SYNC_OBJECT_ADDR,
+	[SP_NEXT_TPC] = mmTPC1_QM_GLBL_CFG0 - mmTPC0_QM_GLBL_CFG0,
+	[SP_MME_CMDQ] = mmMME0_QM_GLBL_CFG0,
+	[SP_MME_CFG_SO] = mmMME0_CTRL_ARCH_DESC_SYNC_OBJECT_ADDR_LOW_LOCAL,
+	[SP_NEXT_MME] = mmMME2_QM_GLBL_CFG0 - mmMME0_QM_GLBL_CFG0,
+	[SP_DMA_CMDQ] = mmDMA0_QM_GLBL_CFG0,
+	[SP_DMA_CFG_SO] = mmDMA0_CORE_WR_COMP_ADDR_LO,
+	[SP_DMA_QUEUES_OFFSET] = mmDMA1_QM_GLBL_CFG0 - mmDMA0_QM_GLBL_CFG0,
+	[SP_NUM_OF_MME_ENGINES] = NUM_OF_MME_ENGINES,
+	[SP_SUB_MME_ENG_NUM] = NUM_OF_MME_SUB_ENGINES,
+	[SP_NUM_OF_DMA_ENGINES] = NUM_OF_DMA_ENGINES,
+	[SP_NUM_OF_TPC_ENGINES] = NUM_OF_TPC_ENGINES,
+	[SP_ENGINE_NUM_OF_QUEUES] = NUM_OF_QUEUES,
+	[SP_ENGINE_NUM_OF_STREAMS] = NUM_OF_STREAMS,
+	[SP_ENGINE_NUM_OF_FENCES] = NUM_OF_FENCES,
+	[SP_FENCE0_CNT_OFFSET] =
+		mmDMA0_QM_CP_FENCE0_CNT_0 - mmDMA0_QM_GLBL_CFG0,
+	[SP_FENCE0_RDATA_OFFSET] =
+		mmDMA0_QM_CP_FENCE0_RDATA_0 - mmDMA0_QM_GLBL_CFG0,
+	[SP_CP_STS_OFFSET] = mmDMA0_QM_CP_STS_0 - mmDMA0_QM_GLBL_CFG0,
+	[SP_NUM_CORES] = 1,
+};
+
+/* The order here is opposite to the order of the indexing in the h/w.
+ * i.e. SYNC_MGR_W_S is actually 0, SYNC_MGR_E_S is 1, etc.
+ */
+static const char * const gaudi_sync_manager_names[] = {
+	"SYNC_MGR_E_N",
+	"SYNC_MGR_W_N",
+	"SYNC_MGR_E_S",
+	"SYNC_MGR_W_S",
+	NULL
+};
+
 struct ecc_info_extract_params {
 	u64 block_address;
 	u32 num_memories;
@@ -363,8 +469,6 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
 					u32 size, u64 val);
 static int gaudi_memset_registers(struct hl_device *hdev, u64 reg_base,
 					u32 num_regs, u32 val);
-static int gaudi_schedule_register_memset(struct hl_device *hdev,
-		u32 hw_queue_id, u64 reg_base, u32 num_regs, u32 val);
 static int gaudi_run_tpc_kernel(struct hl_device *hdev, u64 tpc_kernel,
 				u32 tpc_id);
 static int gaudi_mmu_clear_pgt_range(struct hl_device *hdev);
@@ -375,7 +479,6 @@ static u32 gaudi_gen_signal_cb(struct hl_device *hdev, void *data, u16 sob_id,
 				u32 size, bool eb);
 static u32 gaudi_gen_wait_cb(struct hl_device *hdev,
 				struct hl_gen_wait_properties *prop);
-
 static inline enum hl_collective_mode
 get_collective_mode(struct hl_device *hdev, u32 queue_id)
 {
@@ -403,7 +506,11 @@ static inline void set_default_power_values(struct hl_device *hdev)
 
 	if (hdev->card_type == cpucp_card_type_pmc) {
 		prop->max_power_default = MAX_POWER_DEFAULT_PMC;
-		prop->dc_power_default = DC_POWER_DEFAULT_PMC;
+
+		if (prop->fw_security_enabled)
+			prop->dc_power_default = DC_POWER_DEFAULT_PMC_SEC;
+		else
+			prop->dc_power_default = DC_POWER_DEFAULT_PMC;
 	} else {
 		prop->max_power_default = MAX_POWER_DEFAULT_PCI;
 		prop->dc_power_default = DC_POWER_DEFAULT_PCI;
@@ -450,6 +557,7 @@ static int gaudi_set_fixed_properties(struct hl_device *hdev)
 						get_collective_mode(hdev, i);
 	}
 
+	prop->device_dma_offset_for_host_access = HOST_PHYS_BASE;
 	prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
 	prop->collective_first_sob = 0;
 	prop->collective_first_mon = 0;
@@ -551,6 +659,8 @@ static int gaudi_set_fixed_properties(struct hl_device *hdev)
 	prop->hard_reset_done_by_fw = false;
 	prop->gic_interrupts_enable = true;
 
+	prop->server_type = HL_SERVER_TYPE_UNKNOWN;
+
 	return 0;
 }
 
@@ -723,14 +833,14 @@ pci_init:
 					GAUDI_BOOT_FIT_REQ_TIMEOUT_USEC);
 	if (rc) {
 		if (hdev->reset_on_preboot_fail)
-			hdev->asic_funcs->hw_fini(hdev, true);
+			hdev->asic_funcs->hw_fini(hdev, true, false);
 		goto pci_fini;
 	}
 
 	if (gaudi_get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
 		dev_info(hdev->dev,
 			"H/W state is dirty, must reset before initializing\n");
-		hdev->asic_funcs->hw_fini(hdev, true);
+		hdev->asic_funcs->hw_fini(hdev, true, false);
 	}
 
 	return 0;
@@ -974,17 +1084,11 @@ static void gaudi_sob_group_hw_reset(struct kref *ref)
 	struct gaudi_hw_sob_group *hw_sob_group =
 		container_of(ref, struct gaudi_hw_sob_group, kref);
 	struct hl_device *hdev = hw_sob_group->hdev;
-	u64 base_addr;
-	int rc;
+	int i;
 
-	base_addr = CFG_BASE + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 +
-			hw_sob_group->base_sob_id * 4;
-	rc = gaudi_schedule_register_memset(hdev, hw_sob_group->queue_id,
-			base_addr, NUMBER_OF_SOBS_IN_GRP, 0);
-	if (rc)
-		dev_err(hdev->dev,
-			"failed resetting sob group - sob base %u, count %u",
-			hw_sob_group->base_sob_id, NUMBER_OF_SOBS_IN_GRP);
+	for (i = 0 ; i < NUMBER_OF_SOBS_IN_GRP ; i++)
+		WREG32((mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 +
+			(hw_sob_group->base_sob_id * 4) + (i * 4)), 0);
 
 	kref_init(&hw_sob_group->kref);
 }
@@ -1121,6 +1225,20 @@ static void gaudi_collective_slave_init_job(struct hl_device *hdev,
 	queue_id = job->hw_queue_id;
 	prop = &hdev->kernel_queues[queue_id].sync_stream_prop;
 
+	if (job->cs->encaps_signals) {
+		/* use the encaps signal handle store earlier in the flow
+		 * and set the SOB information from the encaps
+		 * signals handle
+		 */
+		hl_hw_queue_encaps_sig_set_sob_info(hdev, job->cs, job,
+						cs_cmpl);
+
+		dev_dbg(hdev->dev, "collective wait: Sequence %llu found, sob_id: %u,  wait for sob_val: %u\n",
+				job->cs->sequence,
+				cs_cmpl->hw_sob->sob_id,
+				cs_cmpl->sob_val);
+	}
+
 	/* Add to wait CBs using slave monitor */
 	wait_prop.data = (void *) job->user_cb;
 	wait_prop.sob_base = cs_cmpl->hw_sob->sob_id;
@@ -1131,7 +1249,7 @@ static void gaudi_collective_slave_init_job(struct hl_device *hdev,
 	wait_prop.size = cb_size;
 
 	dev_dbg(hdev->dev,
-		"Generate slave wait CB, sob %d, val:0x%x, mon %d, q %d\n",
+		"Generate slave wait CB, sob %d, val:%x, mon %d, q %d\n",
 		cs_cmpl->hw_sob->sob_id, cs_cmpl->sob_val,
 		prop->collective_slave_mon_id, queue_id);
 
@@ -1145,7 +1263,7 @@ static void gaudi_collective_slave_init_job(struct hl_device *hdev,
 			prop->collective_sob_id, cb_size, false);
 }
 
-static void gaudi_collective_wait_init_cs(struct hl_cs *cs)
+static int gaudi_collective_wait_init_cs(struct hl_cs *cs)
 {
 	struct hl_cs_compl *signal_cs_cmpl =
 		container_of(cs->signal_fence, struct hl_cs_compl, base_fence);
@@ -1163,9 +1281,37 @@ static void gaudi_collective_wait_init_cs(struct hl_cs *cs)
 	gaudi = hdev->asic_specific;
 	cprop = &gaudi->collective_props;
 
-	/* copy the SOB id and value of the signal CS */
-	cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
-	cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
+	/* In encaps signals case the SOB info will be retrieved from
+	 * the handle in gaudi_collective_slave_init_job.
+	 */
+	if (!cs->encaps_signals) {
+		/* copy the SOB id and value of the signal CS */
+		cs_cmpl->hw_sob = signal_cs_cmpl->hw_sob;
+		cs_cmpl->sob_val = signal_cs_cmpl->sob_val;
+	}
+
+	/* check again if the signal cs already completed.
+	 * if yes then don't send any wait cs since the hw_sob
+	 * could be in reset already. if signal is not completed
+	 * then get refcount to hw_sob to prevent resetting the sob
+	 * while wait cs is not submitted.
+	 * note that this check is protected by two locks,
+	 * hw queue lock and completion object lock,
+	 * and the same completion object lock also protects
+	 * the hw_sob reset handler function.
+	 * The hw_queue lock prevent out of sync of hw_sob
+	 * refcount value, changed by signal/wait flows.
+	 */
+	spin_lock(&signal_cs_cmpl->lock);
+
+	if (completion_done(&cs->signal_fence->completion)) {
+		spin_unlock(&signal_cs_cmpl->lock);
+		return -EINVAL;
+	}
+	/* Increment kref since all slave queues are now waiting on it */
+	kref_get(&cs_cmpl->hw_sob->kref);
+
+	spin_unlock(&signal_cs_cmpl->lock);
 
 	/* Calculate the stream from collective master queue (1st job) */
 	job = list_first_entry(&cs->job_list, struct hl_cs_job, cs_node);
@@ -1210,21 +1356,17 @@ static void gaudi_collective_wait_init_cs(struct hl_cs *cs)
 				cprop->curr_sob_group_idx[stream], stream);
 	}
 
-	/* Increment kref since all slave queues are now waiting on it */
-	kref_get(&cs_cmpl->hw_sob->kref);
-	/*
-	 * Must put the signal fence after the SOB refcnt increment so
-	 * the SOB refcnt won't turn 0 and reset the SOB before the
-	 * wait CS was submitted.
-	 */
 	mb();
 	hl_fence_put(cs->signal_fence);
 	cs->signal_fence = NULL;
+
+	return 0;
 }
 
 static int gaudi_collective_wait_create_job(struct hl_device *hdev,
 		struct hl_ctx *ctx, struct hl_cs *cs,
-		enum hl_collective_mode mode, u32 queue_id, u32 wait_queue_id)
+		enum hl_collective_mode mode, u32 queue_id, u32 wait_queue_id,
+		u32 encaps_signal_offset)
 {
 	struct hw_queue_properties *hw_queue_prop;
 	struct hl_cs_counters_atomic *cntr;
@@ -1284,6 +1426,13 @@ static int gaudi_collective_wait_create_job(struct hl_device *hdev,
 	job->user_cb_size = cb_size;
 	job->hw_queue_id = queue_id;
 
+	/* since its guaranteed to have only one chunk in the collective wait
+	 * cs, we can use this chunk to set the encapsulated signal offset
+	 * in the jobs.
+	 */
+	if (cs->encaps_signals)
+		job->encaps_sig_wait_offset = encaps_signal_offset;
+
 	/*
 	 * No need in parsing, user CB is the patched CB.
 	 * We call hl_cb_destroy() out of two reasons - we don't need
@@ -1312,8 +1461,9 @@ static int gaudi_collective_wait_create_job(struct hl_device *hdev,
 }
 
 static int gaudi_collective_wait_create_jobs(struct hl_device *hdev,
-		struct hl_ctx *ctx, struct hl_cs *cs, u32 wait_queue_id,
-		u32 collective_engine_id)
+		struct hl_ctx *ctx, struct hl_cs *cs,
+		u32 wait_queue_id, u32 collective_engine_id,
+		u32 encaps_signal_offset)
 {
 	struct gaudi_device *gaudi = hdev->asic_specific;
 	struct hw_queue_properties *hw_queue_prop;
@@ -1363,7 +1513,8 @@ static int gaudi_collective_wait_create_jobs(struct hl_device *hdev,
 		if (i == 0) {
 			queue_id = wait_queue_id;
 			rc = gaudi_collective_wait_create_job(hdev, ctx, cs,
-				HL_COLLECTIVE_MASTER, queue_id, wait_queue_id);
+				HL_COLLECTIVE_MASTER, queue_id,
+				wait_queue_id, encaps_signal_offset);
 		} else {
 			if (nic_idx < NIC_NUMBER_OF_ENGINES) {
 				if (gaudi->hw_cap_initialized &
@@ -1383,7 +1534,8 @@ static int gaudi_collective_wait_create_jobs(struct hl_device *hdev,
 			}
 
 			rc = gaudi_collective_wait_create_job(hdev, ctx, cs,
-				HL_COLLECTIVE_SLAVE, queue_id, wait_queue_id);
+				HL_COLLECTIVE_SLAVE, queue_id,
+				wait_queue_id, encaps_signal_offset);
 		}
 
 		if (rc)
@@ -1431,6 +1583,11 @@ static int gaudi_late_init(struct hl_device *hdev)
 		return rc;
 	}
 
+	/* Scrub both SRAM and DRAM */
+	rc = hdev->asic_funcs->scrub_device_mem(hdev, 0, 0);
+	if (rc)
+		goto disable_pci_access;
+
 	rc = gaudi_fetch_psoc_frequency(hdev);
 	if (rc) {
 		dev_err(hdev->dev, "Failed to fetch psoc frequency\n");
@@ -1455,6 +1612,11 @@ static int gaudi_late_init(struct hl_device *hdev)
 		goto disable_pci_access;
 	}
 
+	/* We only support a single ASID for the user, so for the sake of optimization, just
+	 * initialize the ASID one time during device initialization with the fixed value of 1
+	 */
+	gaudi_mmu_prepare(hdev, 1);
+
 	return 0;
 
 disable_pci_access:
@@ -1720,8 +1882,12 @@ static int gaudi_sw_init(struct hl_device *hdev)
 	hdev->supports_sync_stream = true;
 	hdev->supports_coresight = true;
 	hdev->supports_staged_submission = true;
+	hdev->supports_wait_for_multi_cs = true;
 
-	gaudi_set_pci_memory_regions(hdev);
+	hdev->asic_funcs->set_pci_memory_regions(hdev);
+	hdev->stream_master_qid_arr =
+				hdev->asic_funcs->get_stream_master_qid_arr();
+	hdev->stream_master_qid_arr_size = GAUDI_STREAM_MASTER_ARR_SIZE;
 
 	return 0;
 
@@ -2523,7 +2689,7 @@ static void gaudi_init_golden_registers(struct hl_device *hdev)
 				tpc_id < TPC_NUMBER_OF_ENGINES;
 				tpc_id++, tpc_offset += TPC_CFG_OFFSET) {
 		/* Mask all arithmetic interrupts from TPC */
-		WREG32(mmTPC0_CFG_TPC_INTR_MASK + tpc_offset, 0x8FFF);
+		WREG32(mmTPC0_CFG_TPC_INTR_MASK + tpc_offset, 0x8FFE);
 		/* Set 16 cache lines */
 		WREG32_FIELD(TPC0_CFG_MSS_CONFIG, tpc_offset,
 				ICACHE_FETCH_LINE_NUM, 2);
@@ -3670,7 +3836,7 @@ static void gaudi_disable_timestamp(struct hl_device *hdev)
 	WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
 }
 
-static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset)
+static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset, bool fw_reset)
 {
 	u32 wait_timeout_ms;
 
@@ -3682,6 +3848,9 @@ static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset)
 	else
 		wait_timeout_ms = GAUDI_RESET_WAIT_MSEC;
 
+	if (fw_reset)
+		goto skip_engines;
+
 	gaudi_stop_nic_qmans(hdev);
 	gaudi_stop_mme_qmans(hdev);
 	gaudi_stop_tpc_qmans(hdev);
@@ -3707,6 +3876,7 @@ static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset)
 
 	gaudi_disable_timestamp(hdev);
 
+skip_engines:
 	gaudi_disable_msi(hdev);
 }
 
@@ -3739,6 +3909,9 @@ static int gaudi_mmu_init(struct hl_device *hdev)
 	WREG32(mmSTLB_CACHE_INV_BASE_39_8, MMU_CACHE_MNG_ADDR >> 8);
 	WREG32(mmSTLB_CACHE_INV_BASE_49_40, MMU_CACHE_MNG_ADDR >> 40);
 
+	/* mem cache invalidation */
+	WREG32(mmSTLB_MEM_CACHE_INVALIDATION, 1);
+
 	hdev->asic_funcs->mmu_invalidate_cache(hdev, true, 0);
 
 	WREG32(mmMMU_UP_MMU_ENABLE, 1);
@@ -4071,7 +4244,7 @@ disable_queues:
 	return rc;
 }
 
-static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
+static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset)
 {
 	struct cpu_dyn_regs *dyn_regs =
 			&hdev->fw_loader.dynamic_loader.comm_desc.cpu_dyn_regs;
@@ -4092,6 +4265,14 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
 		cpu_timeout_ms = GAUDI_CPU_RESET_WAIT_MSEC;
 	}
 
+	if (fw_reset) {
+		dev_info(hdev->dev,
+			"Firmware performs HARD reset, going to wait %dms\n",
+			reset_timeout_ms);
+
+		goto skip_reset;
+	}
+
 	driver_performs_reset = !!(!hdev->asic_prop.fw_security_enabled &&
 					!hdev->asic_prop.hard_reset_done_by_fw);
 
@@ -4168,6 +4349,7 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
 			reset_timeout_ms);
 	}
 
+skip_reset:
 	/*
 	 * After hard reset, we can't poll the BTM_FSM register because the PSOC
 	 * itself is in reset. Need to wait until the reset is deasserted
@@ -4212,7 +4394,7 @@ static int gaudi_resume(struct hl_device *hdev)
 	return gaudi_init_iatu(hdev);
 }
 
-static int gaudi_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
+static int gaudi_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
 	int rc;
@@ -4621,8 +4803,8 @@ static int gaudi_hbm_scrubbing(struct hl_device *hdev)
 				"Doing HBM scrubbing for 0x%09llx - 0x%09llx\n",
 				cur_addr, cur_addr + chunk_size);
 
-			WREG32(mmDMA0_CORE_SRC_BASE_LO + dma_offset, 0);
-			WREG32(mmDMA0_CORE_SRC_BASE_HI + dma_offset, 0);
+			WREG32(mmDMA0_CORE_SRC_BASE_LO + dma_offset, 0xdeadbeaf);
+			WREG32(mmDMA0_CORE_SRC_BASE_HI + dma_offset, 0xdeadbeaf);
 			WREG32(mmDMA0_CORE_DST_BASE_LO + dma_offset,
 						lower_32_bits(cur_addr));
 			WREG32(mmDMA0_CORE_DST_BASE_HI + dma_offset,
@@ -5796,78 +5978,6 @@ release_cb:
 	return rc;
 }
 
-static int gaudi_schedule_register_memset(struct hl_device *hdev,
-		u32 hw_queue_id, u64 reg_base, u32 num_regs, u32 val)
-{
-	struct hl_ctx *ctx;
-	struct hl_pending_cb *pending_cb;
-	struct packet_msg_long *pkt;
-	u32 cb_size, ctl;
-	struct hl_cb *cb;
-	int i, rc;
-
-	mutex_lock(&hdev->fpriv_list_lock);
-	ctx = hdev->compute_ctx;
-
-	/* If no compute context available or context is going down
-	 * memset registers directly
-	 */
-	if (!ctx || kref_read(&ctx->refcount) == 0) {
-		rc = gaudi_memset_registers(hdev, reg_base, num_regs, val);
-		mutex_unlock(&hdev->fpriv_list_lock);
-		return rc;
-	}
-
-	mutex_unlock(&hdev->fpriv_list_lock);
-
-	cb_size = (sizeof(*pkt) * num_regs) +
-			sizeof(struct packet_msg_prot) * 2;
-
-	if (cb_size > SZ_2M) {
-		dev_err(hdev->dev, "CB size must be smaller than %uMB", SZ_2M);
-		return -ENOMEM;
-	}
-
-	pending_cb = kzalloc(sizeof(*pending_cb), GFP_KERNEL);
-	if (!pending_cb)
-		return -ENOMEM;
-
-	cb = hl_cb_kernel_create(hdev, cb_size, false);
-	if (!cb) {
-		kfree(pending_cb);
-		return -EFAULT;
-	}
-
-	pkt = cb->kernel_address;
-
-	ctl = FIELD_PREP(GAUDI_PKT_LONG_CTL_OP_MASK, 0); /* write the value */
-	ctl |= FIELD_PREP(GAUDI_PKT_CTL_OPCODE_MASK, PACKET_MSG_LONG);
-	ctl |= FIELD_PREP(GAUDI_PKT_CTL_EB_MASK, 1);
-	ctl |= FIELD_PREP(GAUDI_PKT_CTL_RB_MASK, 1);
-	ctl |= FIELD_PREP(GAUDI_PKT_CTL_MB_MASK, 1);
-
-	for (i = 0; i < num_regs ; i++, pkt++) {
-		pkt->ctl = cpu_to_le32(ctl);
-		pkt->value = cpu_to_le32(val);
-		pkt->addr = cpu_to_le64(reg_base + (i * 4));
-	}
-
-	hl_cb_destroy(hdev, &hdev->kernel_cb_mgr, cb->id << PAGE_SHIFT);
-
-	pending_cb->cb = cb;
-	pending_cb->cb_size = cb_size;
-	/* The queue ID MUST be an external queue ID. Otherwise, we will
-	 * have undefined behavior
-	 */
-	pending_cb->hw_queue_id = hw_queue_id;
-
-	spin_lock(&ctx->pending_cb_lock);
-	list_add_tail(&pending_cb->cb_node, &ctx->pending_cb_list);
-	spin_unlock(&ctx->pending_cb_lock);
-
-	return 0;
-}
-
 static int gaudi_restore_sm_registers(struct hl_device *hdev)
 {
 	u64 base_addr;
@@ -6013,7 +6123,7 @@ static int gaudi_restore_user_registers(struct hl_device *hdev)
 
 static int gaudi_context_switch(struct hl_device *hdev, u32 asid)
 {
-	return gaudi_restore_user_registers(hdev);
+	return 0;
 }
 
 static int gaudi_mmu_clear_pgt_range(struct hl_device *hdev)
@@ -6723,6 +6833,9 @@ static void gaudi_mmu_prepare(struct hl_device *hdev, u32 asid)
 				asid);
 	}
 
+	gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_ARUSER, asid);
+	gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_AWUSER, asid);
+
 	hdev->asic_funcs->set_clock_gating(hdev);
 
 	mutex_unlock(&gaudi->clk_gate_mutex);
@@ -6772,7 +6885,8 @@ static int gaudi_send_job_on_qman0(struct hl_device *hdev,
 
 	dma_offset = gaudi_dma_assignment[GAUDI_PCI_DMA_1] * DMA_CORE_OFFSET;
 
-	WREG32_OR(mmDMA0_CORE_PROT + dma_offset, BIT(DMA0_CORE_PROT_VAL_SHIFT));
+	WREG32(mmDMA0_CORE_PROT + dma_offset,
+			BIT(DMA0_CORE_PROT_ERR_VAL_SHIFT) | BIT(DMA0_CORE_PROT_VAL_SHIFT));
 
 	rc = hl_hw_queue_send_cb_no_cmpl(hdev, GAUDI_QUEUE_ID_DMA_0_0,
 					job->job_cb_size, cb->bus_address);
@@ -6793,8 +6907,7 @@ static int gaudi_send_job_on_qman0(struct hl_device *hdev,
 	}
 
 free_fence_ptr:
-	WREG32_AND(mmDMA0_CORE_PROT + dma_offset,
-			~BIT(DMA0_CORE_PROT_VAL_SHIFT));
+	WREG32(mmDMA0_CORE_PROT + dma_offset, BIT(DMA0_CORE_PROT_ERR_VAL_SHIFT));
 
 	hdev->asic_funcs->asic_dma_pool_free(hdev, (void *) fence_ptr,
 					fence_dma_addr);
@@ -7168,7 +7281,7 @@ static void gaudi_print_sw_config_stream_data(struct hl_device *hdev, u32 stream
 
 	cq_ptr = (((u64) RREG32(cq_ptr_hi)) << 32) | RREG32(cq_ptr_lo);
 	size = RREG32(cq_tsize);
-	dev_info(hdev->dev, "stop on err: stream: %u, addr: %#llx, size: %x\n",
+	dev_info(hdev->dev, "stop on err: stream: %u, addr: %#llx, size: %u\n",
 							stream, cq_ptr, size);
 }
 
@@ -7224,7 +7337,7 @@ static void gaudi_print_last_pqes_on_err(struct hl_device *hdev, u32 qid_base,
 
 		addr = le64_to_cpu(bd->ptr);
 
-		dev_info(hdev->dev, "stop on err PQE(stream %u): ci: %u, addr: %#llx, size: %x\n",
+		dev_info(hdev->dev, "stop on err PQE(stream %u): ci: %u, addr: %#llx, size: %u\n",
 							stream, ci, addr, len);
 
 		/* get previous ci, wrap if needed */
@@ -7326,24 +7439,30 @@ static void gaudi_print_sm_sei_info(struct hl_device *hdev, u16 event_type,
 {
 	u32 index = event_type - GAUDI_EVENT_DMA_IF_SEI_0;
 
+	/* Flip the bits as the enum is ordered in the opposite way */
+	index = (index ^ 0x3) & 0x3;
+
 	switch (sei_data->sei_cause) {
 	case SM_SEI_SO_OVERFLOW:
-		dev_err(hdev->dev,
-			"SM %u SEI Error: SO %u overflow/underflow",
-			index, le32_to_cpu(sei_data->sei_log));
+		dev_err_ratelimited(hdev->dev,
+			"%s SEI Error: SOB Group %u overflow/underflow",
+			gaudi_sync_manager_names[index],
+			le32_to_cpu(sei_data->sei_log));
 		break;
 	case SM_SEI_LBW_4B_UNALIGNED:
-		dev_err(hdev->dev,
-			"SM %u SEI Error: Unaligned 4B LBW access, monitor agent address low - %#x",
-			index, le32_to_cpu(sei_data->sei_log));
+		dev_err_ratelimited(hdev->dev,
+			"%s SEI Error: Unaligned 4B LBW access, monitor agent address low - %#x",
+			gaudi_sync_manager_names[index],
+			le32_to_cpu(sei_data->sei_log));
 		break;
 	case SM_SEI_AXI_RESPONSE_ERR:
-		dev_err(hdev->dev,
-			"SM %u SEI Error: AXI ID %u response error",
-			index, le32_to_cpu(sei_data->sei_log));
+		dev_err_ratelimited(hdev->dev,
+			"%s SEI Error: AXI ID %u response error",
+			gaudi_sync_manager_names[index],
+			le32_to_cpu(sei_data->sei_log));
 		break;
 	default:
-		dev_err(hdev->dev, "Unknown SM SEI cause %u",
+		dev_err_ratelimited(hdev->dev, "Unknown SM SEI cause %u",
 				le32_to_cpu(sei_data->sei_log));
 		break;
 	}
@@ -7358,6 +7477,11 @@ static void gaudi_handle_ecc_event(struct hl_device *hdev, u16 event_type,
 	bool extract_info_from_fw;
 	int rc;
 
+	if (hdev->asic_prop.fw_security_enabled) {
+		extract_info_from_fw = true;
+		goto extract_ecc_info;
+	}
+
 	switch (event_type) {
 	case GAUDI_EVENT_PCIE_CORE_SERR ... GAUDI_EVENT_PCIE_PHY_DERR:
 	case GAUDI_EVENT_DMA0_SERR_ECC ... GAUDI_EVENT_MMU_DERR:
@@ -7430,6 +7554,7 @@ static void gaudi_handle_ecc_event(struct hl_device *hdev, u16 event_type,
 		return;
 	}
 
+extract_ecc_info:
 	if (extract_info_from_fw) {
 		ecc_address = le64_to_cpu(ecc_data->ecc_address);
 		ecc_syndrom = le64_to_cpu(ecc_data->ecc_syndrom);
@@ -7806,8 +7931,15 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
 	u32 ctl = le32_to_cpu(eq_entry->hdr.ctl);
 	u16 event_type = ((ctl & EQ_CTL_EVENT_TYPE_MASK)
 			>> EQ_CTL_EVENT_TYPE_SHIFT);
-	u8 cause;
 	bool reset_required;
+	u8 cause;
+	int rc;
+
+	if (event_type >= GAUDI_EVENT_SIZE) {
+		dev_err(hdev->dev, "Event type %u exceeds maximum of %u",
+				event_type, GAUDI_EVENT_SIZE - 1);
+		return;
+	}
 
 	gaudi->events_stat[event_type]++;
 	gaudi->events_stat_aggregate[event_type]++;
@@ -7880,10 +8012,10 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
 					tpc_dec_event_to_tpc_id(event_type),
 					"AXI_SLV_DEC_Error");
 		if (reset_required) {
-			dev_err(hdev->dev, "hard reset required due to %s\n",
+			dev_err(hdev->dev, "reset required due to %s\n",
 				gaudi_irq_map_table[event_type].name);
 
-			goto reset_device;
+			hl_device_reset(hdev, 0);
 		} else {
 			hl_fw_unmask_irq(hdev, event_type);
 		}
@@ -7902,10 +8034,10 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
 					tpc_krn_event_to_tpc_id(event_type),
 					"KRN_ERR");
 		if (reset_required) {
-			dev_err(hdev->dev, "hard reset required due to %s\n",
+			dev_err(hdev->dev, "reset required due to %s\n",
 				gaudi_irq_map_table[event_type].name);
 
-			goto reset_device;
+			hl_device_reset(hdev, 0);
 		} else {
 			hl_fw_unmask_irq(hdev, event_type);
 		}
@@ -7993,6 +8125,10 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
 		gaudi_print_irq_info(hdev, event_type, false);
 		gaudi_print_sm_sei_info(hdev, event_type,
 					&eq_entry->sm_sei_data);
+		rc = hl_state_dump(hdev);
+		if (rc)
+			dev_err(hdev->dev,
+				"Error during system state dump %d\n", rc);
 		hl_fw_unmask_irq(hdev, event_type);
 		break;
 
@@ -8031,7 +8167,9 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
 	return;
 
 reset_device:
-	if (hdev->hard_reset_on_fw_events)
+	if (hdev->asic_prop.fw_security_enabled)
+		hl_device_reset(hdev, HL_RESET_HARD | HL_RESET_FW);
+	else if (hdev->hard_reset_on_fw_events)
 		hl_device_reset(hdev, HL_RESET_HARD);
 	else
 		hl_fw_unmask_irq(hdev, event_type);
@@ -8563,11 +8701,20 @@ static void gaudi_internal_cb_pool_fini(struct hl_device *hdev,
 
 static int gaudi_ctx_init(struct hl_ctx *ctx)
 {
+	int rc;
+
 	if (ctx->asid == HL_KERNEL_ASID_ID)
 		return 0;
 
-	gaudi_mmu_prepare(ctx->hdev, ctx->asid);
-	return gaudi_internal_cb_pool_init(ctx->hdev, ctx);
+	rc = gaudi_internal_cb_pool_init(ctx->hdev, ctx);
+	if (rc)
+		return rc;
+
+	rc = gaudi_restore_user_registers(ctx->hdev);
+	if (rc)
+		gaudi_internal_cb_pool_fini(ctx->hdev, ctx);
+
+	return rc;
 }
 
 static void gaudi_ctx_fini(struct hl_ctx *ctx)
@@ -8596,6 +8743,11 @@ static u32 gaudi_get_wait_cb_size(struct hl_device *hdev)
 			sizeof(struct packet_msg_prot) * 2;
 }
 
+static u32 gaudi_get_sob_addr(struct hl_device *hdev, u32 sob_id)
+{
+	return mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 + (sob_id * 4);
+}
+
 static u32 gaudi_gen_signal_cb(struct hl_device *hdev, void *data, u16 sob_id,
 				u32 size, bool eb)
 {
@@ -8902,16 +9054,12 @@ static u32 gaudi_gen_wait_cb(struct hl_device *hdev,
 static void gaudi_reset_sob(struct hl_device *hdev, void *data)
 {
 	struct hl_hw_sob *hw_sob = (struct hl_hw_sob *) data;
-	int rc;
 
 	dev_dbg(hdev->dev, "reset SOB, q_idx: %d, sob_id: %d\n", hw_sob->q_idx,
 		hw_sob->sob_id);
 
-	rc = gaudi_schedule_register_memset(hdev, hw_sob->q_idx,
-			CFG_BASE + mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 +
-			hw_sob->sob_id * 4, 1, 0);
-	if (rc)
-		dev_err(hdev->dev, "failed resetting sob %u", hw_sob->sob_id);
+	WREG32(mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 +
+			hw_sob->sob_id * 4, 0);
 
 	kref_init(&hw_sob->kref);
 }
@@ -8977,6 +9125,280 @@ static int gaudi_map_pll_idx_to_fw_idx(u32 pll_idx)
 	}
 }
 
+static int gaudi_add_sync_to_engine_map_entry(
+	struct hl_sync_to_engine_map *map, u32 reg_value,
+	enum hl_sync_engine_type engine_type, u32 engine_id)
+{
+	struct hl_sync_to_engine_map_entry *entry;
+
+	/* Reg value represents a partial address of sync object,
+	 * it is used as unique identifier. For this we need to
+	 * clear the cutoff cfg base bits from the value.
+	 */
+	if (reg_value == 0 || reg_value == 0xffffffff)
+		return 0;
+	reg_value -= (u32)CFG_BASE;
+
+	/* create a new hash entry */
+	entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry)
+		return -ENOMEM;
+	entry->engine_type = engine_type;
+	entry->engine_id = engine_id;
+	entry->sync_id = reg_value;
+	hash_add(map->tb, &entry->node, reg_value);
+
+	return 0;
+}
+
+static int gaudi_gen_sync_to_engine_map(struct hl_device *hdev,
+				struct hl_sync_to_engine_map *map)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	struct gaudi_device *gaudi = hdev->asic_specific;
+	int i, j, rc;
+	u32 reg_value;
+
+	/* Iterate over TPC engines */
+	for (i = 0; i < sds->props[SP_NUM_OF_TPC_ENGINES]; ++i) {
+		/* TPC registered must be accessed with clock gating disabled */
+		mutex_lock(&gaudi->clk_gate_mutex);
+		hdev->asic_funcs->disable_clock_gating(hdev);
+
+		reg_value = RREG32(sds->props[SP_TPC0_CFG_SO] +
+					sds->props[SP_NEXT_TPC] * i);
+
+		/* We can reenable clock_gating */
+		hdev->asic_funcs->set_clock_gating(hdev);
+		mutex_unlock(&gaudi->clk_gate_mutex);
+
+		rc = gaudi_add_sync_to_engine_map_entry(map, reg_value,
+							ENGINE_TPC, i);
+		if (rc)
+			goto free_sync_to_engine_map;
+	}
+
+	/* Iterate over MME engines */
+	for (i = 0; i < sds->props[SP_NUM_OF_MME_ENGINES]; ++i) {
+		for (j = 0; j < sds->props[SP_SUB_MME_ENG_NUM]; ++j) {
+			/* MME registered must be accessed with clock gating
+			 * disabled
+			 */
+			mutex_lock(&gaudi->clk_gate_mutex);
+			hdev->asic_funcs->disable_clock_gating(hdev);
+
+			reg_value = RREG32(sds->props[SP_MME_CFG_SO] +
+						sds->props[SP_NEXT_MME] * i +
+						j * sizeof(u32));
+
+			/* We can reenable clock_gating */
+			hdev->asic_funcs->set_clock_gating(hdev);
+			mutex_unlock(&gaudi->clk_gate_mutex);
+
+			rc = gaudi_add_sync_to_engine_map_entry(
+				map, reg_value, ENGINE_MME,
+				i * sds->props[SP_SUB_MME_ENG_NUM] + j);
+			if (rc)
+				goto free_sync_to_engine_map;
+		}
+	}
+
+	/* Iterate over DMA engines */
+	for (i = 0; i < sds->props[SP_NUM_OF_DMA_ENGINES]; ++i) {
+		reg_value = RREG32(sds->props[SP_DMA_CFG_SO] +
+					sds->props[SP_DMA_QUEUES_OFFSET] * i);
+		rc = gaudi_add_sync_to_engine_map_entry(map, reg_value,
+							ENGINE_DMA, i);
+		if (rc)
+			goto free_sync_to_engine_map;
+	}
+
+	return 0;
+
+free_sync_to_engine_map:
+	hl_state_dump_free_sync_to_engine_map(map);
+
+	return rc;
+}
+
+static int gaudi_monitor_valid(struct hl_mon_state_dump *mon)
+{
+	return FIELD_GET(
+		SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_VALID_MASK,
+		mon->status);
+}
+
+static void gaudi_fill_sobs_from_mon(char *sobs, struct hl_mon_state_dump *mon)
+{
+	const size_t max_write = 10;
+	u32 gid, mask, sob;
+	int i, offset;
+
+	/* Sync object ID is calculated as follows:
+	 * (8 * group_id + cleared bits in mask)
+	 */
+	gid = FIELD_GET(SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_MASK,
+			mon->arm_data);
+	mask = FIELD_GET(SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_MASK,
+			mon->arm_data);
+
+	for (i = 0, offset = 0; mask && offset < MONITOR_SOB_STRING_SIZE -
+		max_write; mask >>= 1, i++) {
+		if (!(mask & 1)) {
+			sob = gid * MONITOR_MAX_SOBS + i;
+
+			if (offset > 0)
+				offset += snprintf(sobs + offset, max_write,
+							", ");
+
+			offset += snprintf(sobs + offset, max_write, "%u", sob);
+		}
+	}
+}
+
+static int gaudi_print_single_monitor(char **buf, size_t *size, size_t *offset,
+				struct hl_device *hdev,
+				struct hl_mon_state_dump *mon)
+{
+	const char *name;
+	char scratch_buf1[BIN_REG_STRING_SIZE],
+		scratch_buf2[BIN_REG_STRING_SIZE];
+	char monitored_sobs[MONITOR_SOB_STRING_SIZE] = {0};
+
+	name = hl_state_dump_get_monitor_name(hdev, mon);
+	if (!name)
+		name = "";
+
+	gaudi_fill_sobs_from_mon(monitored_sobs, mon);
+
+	return hl_snprintf_resize(
+		buf, size, offset,
+		"Mon id: %u%s, wait for group id: %u mask %s to reach val: %u and write %u to address 0x%llx. Pending: %s. Means sync objects [%s] are being monitored.",
+		mon->id, name,
+		FIELD_GET(SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_MASK,
+				mon->arm_data),
+		hl_format_as_binary(
+			scratch_buf1, sizeof(scratch_buf1),
+			FIELD_GET(
+				SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_MASK,
+				mon->arm_data)),
+		FIELD_GET(SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOD_MASK,
+				mon->arm_data),
+		mon->wr_data,
+		(((u64)mon->wr_addr_high) << 32) | mon->wr_addr_low,
+		hl_format_as_binary(
+			scratch_buf2, sizeof(scratch_buf2),
+			FIELD_GET(
+				SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_PENDING_MASK,
+				mon->status)),
+		monitored_sobs);
+}
+
+
+static int gaudi_print_fences_single_engine(
+	struct hl_device *hdev, u64 base_offset, u64 status_base_offset,
+	enum hl_sync_engine_type engine_type, u32 engine_id, char **buf,
+	size_t *size, size_t *offset)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	int rc = -ENOMEM, i;
+	u32 *statuses, *fences;
+
+	statuses = kcalloc(sds->props[SP_ENGINE_NUM_OF_QUEUES],
+			sizeof(*statuses), GFP_KERNEL);
+	if (!statuses)
+		goto out;
+
+	fences = kcalloc(sds->props[SP_ENGINE_NUM_OF_FENCES] *
+				sds->props[SP_ENGINE_NUM_OF_QUEUES],
+			 sizeof(*fences), GFP_KERNEL);
+	if (!fences)
+		goto free_status;
+
+	for (i = 0; i < sds->props[SP_ENGINE_NUM_OF_FENCES]; ++i)
+		statuses[i] = RREG32(status_base_offset + i * sizeof(u32));
+
+	for (i = 0; i < sds->props[SP_ENGINE_NUM_OF_FENCES] *
+				sds->props[SP_ENGINE_NUM_OF_QUEUES]; ++i)
+		fences[i] = RREG32(base_offset + i * sizeof(u32));
+
+	/* The actual print */
+	for (i = 0; i < sds->props[SP_ENGINE_NUM_OF_QUEUES]; ++i) {
+		u32 fence_id;
+		u64 fence_cnt, fence_rdata;
+		const char *engine_name;
+
+		if (!FIELD_GET(TPC0_QM_CP_STS_0_FENCE_IN_PROGRESS_MASK,
+			statuses[i]))
+			continue;
+
+		fence_id =
+			FIELD_GET(TPC0_QM_CP_STS_0_FENCE_ID_MASK, statuses[i]);
+		fence_cnt = base_offset + CFG_BASE +
+			sizeof(u32) *
+			(i + fence_id * sds->props[SP_ENGINE_NUM_OF_QUEUES]);
+		fence_rdata = fence_cnt - sds->props[SP_FENCE0_CNT_OFFSET] +
+				sds->props[SP_FENCE0_RDATA_OFFSET];
+		engine_name = hl_sync_engine_to_string(engine_type);
+
+		rc = hl_snprintf_resize(
+			buf, size, offset,
+			"%s%u, stream %u: fence id %u cnt = 0x%llx (%s%u_QM.CP_FENCE%u_CNT_%u) rdata = 0x%llx (%s%u_QM.CP_FENCE%u_RDATA_%u) value = %u, cp_status = %u\n",
+			engine_name, engine_id,
+			i, fence_id,
+			fence_cnt, engine_name, engine_id, fence_id, i,
+			fence_rdata, engine_name, engine_id, fence_id, i,
+			fences[fence_id],
+			statuses[i]);
+		if (rc)
+			goto free_fences;
+	}
+
+	rc = 0;
+
+free_fences:
+	kfree(fences);
+free_status:
+	kfree(statuses);
+out:
+	return rc;
+}
+
+
+static struct hl_state_dump_specs_funcs gaudi_state_dump_funcs = {
+	.monitor_valid = gaudi_monitor_valid,
+	.print_single_monitor = gaudi_print_single_monitor,
+	.gen_sync_to_engine_map = gaudi_gen_sync_to_engine_map,
+	.print_fences_single_engine = gaudi_print_fences_single_engine,
+};
+
+static void gaudi_state_dump_init(struct hl_device *hdev)
+{
+	struct hl_state_dump_specs *sds = &hdev->state_dump_specs;
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(gaudi_so_id_to_str); ++i)
+		hash_add(sds->so_id_to_str_tb,
+			&gaudi_so_id_to_str[i].node,
+			gaudi_so_id_to_str[i].id);
+
+	for (i = 0; i < ARRAY_SIZE(gaudi_monitor_id_to_str); ++i)
+		hash_add(sds->monitor_id_to_str_tb,
+			&gaudi_monitor_id_to_str[i].node,
+			gaudi_monitor_id_to_str[i].id);
+
+	sds->props = gaudi_state_dump_specs_props;
+
+	sds->sync_namager_names = gaudi_sync_manager_names;
+
+	sds->funcs = gaudi_state_dump_funcs;
+}
+
+static u32 *gaudi_get_stream_master_qid_arr(void)
+{
+	return gaudi_stream_master;
+}
+
 static const struct hl_asic_funcs gaudi_funcs = {
 	.early_init = gaudi_early_init,
 	.early_fini = gaudi_early_fini,
@@ -8989,7 +9411,7 @@ static const struct hl_asic_funcs gaudi_funcs = {
 	.halt_engines = gaudi_halt_engines,
 	.suspend = gaudi_suspend,
 	.resume = gaudi_resume,
-	.cb_mmap = gaudi_cb_mmap,
+	.mmap = gaudi_mmap,
 	.ring_doorbell = gaudi_ring_doorbell,
 	.pqe_write = gaudi_pqe_write,
 	.asic_dma_alloc_coherent = gaudi_dma_alloc_coherent,
@@ -9062,7 +9484,11 @@ static const struct hl_asic_funcs gaudi_funcs = {
 	.enable_events_from_fw = gaudi_enable_events_from_fw,
 	.map_pll_idx_to_fw_idx = gaudi_map_pll_idx_to_fw_idx,
 	.init_firmware_loader = gaudi_init_firmware_loader,
-	.init_cpu_scrambler_dram = gaudi_init_scrambler_hbm
+	.init_cpu_scrambler_dram = gaudi_init_scrambler_hbm,
+	.state_dump_init = gaudi_state_dump_init,
+	.get_sob_addr = gaudi_get_sob_addr,
+	.set_pci_memory_regions = gaudi_set_pci_memory_regions,
+	.get_stream_master_qid_arr = gaudi_get_stream_master_qid_arr
 };
 
 /**
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 957bf3720f70..bbbf1c343e75 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -36,6 +36,8 @@
 #define NUMBER_OF_INTERRUPTS		(NUMBER_OF_CMPLT_QUEUES + \
 						NUMBER_OF_CPU_HW_QUEUES)
 
+#define GAUDI_STREAM_MASTER_ARR_SIZE	8
+
 #if (NUMBER_OF_INTERRUPTS > GAUDI_MSI_ENTRIES)
 #error "Number of MSI interrupts must be smaller or equal to GAUDI_MSI_ENTRIES"
 #endif
@@ -50,6 +52,8 @@
 #define DC_POWER_DEFAULT_PCI		60000		/* 60W */
 #define DC_POWER_DEFAULT_PMC		60000		/* 60W */
 
+#define DC_POWER_DEFAULT_PMC_SEC	97000		/* 97W */
+
 #define GAUDI_CPU_TIMEOUT_USEC		30000000	/* 30s */
 
 #define TPC_ENABLED_MASK		0xFF
@@ -62,7 +66,7 @@
 
 #define DMA_MAX_TRANSFER_SIZE		U32_MAX
 
-#define GAUDI_DEFAULT_CARD_NAME		"HL2000"
+#define GAUDI_DEFAULT_CARD_NAME		"HL205"
 
 #define GAUDI_MAX_PENDING_CS		SZ_16K
 
@@ -117,6 +121,7 @@
 	(((mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_511 - \
 	mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_0) + 4) >> 2)
 
+#define MONITOR_MAX_SOBS	8
 
 /* DRAM Memory Map */
 
@@ -200,6 +205,18 @@
 #define HW_CAP_TPC_MASK		GENMASK(31, 24)
 #define HW_CAP_TPC_SHIFT	24
 
+#define NEXT_SYNC_OBJ_ADDR_INTERVAL \
+	(mmSYNC_MNGR_W_N_SYNC_MNGR_OBJS_SOB_OBJ_0 - \
+	 mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_0)
+#define NUM_OF_MME_ENGINES			2
+#define NUM_OF_MME_SUB_ENGINES		2
+#define NUM_OF_TPC_ENGINES			8
+#define NUM_OF_DMA_ENGINES			8
+#define NUM_OF_QUEUES				5
+#define NUM_OF_STREAMS				4
+#define NUM_OF_FENCES				4
+
+
 #define GAUDI_CPU_PCI_MSB_ADDR(addr)	(((addr) & GENMASK_ULL(49, 39)) >> 39)
 #define GAUDI_PCI_TO_CPU_ADDR(addr)			\
 	do {						\
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
index c2a27ed1c4d1..5349c1be13f9 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
@@ -622,11 +622,6 @@ static int gaudi_config_etr(struct hl_device *hdev,
 			return -EINVAL;
 		}
 
-		gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_ARUSER,
-						hdev->compute_ctx->asid);
-		gaudi_mmu_prepare_reg(hdev, mmPSOC_GLOBAL_CONF_TRACE_AWUSER,
-						hdev->compute_ctx->asid);
-
 		msb = upper_32_bits(input->buffer_address) >> 8;
 		msb &= PSOC_GLOBAL_CONF_TRACE_ADDR_MSB_MASK;
 		WREG32(mmPSOC_GLOBAL_CONF_TRACE_ADDR, msb);
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c
index 0d3240f1f7d7..cb265c00cf73 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_security.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c
@@ -9559,6 +9559,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC0_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC0_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC0_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC0_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC0_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC0_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC0_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -10013,6 +10014,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC1_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC1_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC1_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC1_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC1_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC1_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC1_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -10466,6 +10468,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC2_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC2_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC2_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC2_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC2_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC2_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC2_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -10919,6 +10922,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC3_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC3_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC3_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC3_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC3_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC3_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC3_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -11372,6 +11376,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC4_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC4_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC4_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC4_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC4_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC4_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC4_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -11825,6 +11830,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC5_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC5_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC5_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC5_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC5_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC5_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC5_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -12280,6 +12286,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC6_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC6_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC6_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC6_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC6_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC6_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC6_CFG_MSS_CONFIG & 0x7F) >> 2);
@@ -12735,6 +12742,7 @@ static void gaudi_init_tpc_protection_bits(struct hl_device *hdev)
 	mask |= 1U << ((mmTPC7_CFG_CFG_BASE_ADDRESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC7_CFG_CFG_SUBTRACT_VALUE & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC7_CFG_TPC_STALL & 0x7F) >> 2);
+	mask |= 1U << ((mmTPC7_CFG_ICACHE_BASE_ADDERESS_HIGH & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC7_CFG_RD_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC7_CFG_WR_RATE_LIMIT & 0x7F) >> 2);
 	mask |= 1U << ((mmTPC7_CFG_MSS_CONFIG & 0x7F) >> 2);
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 755e08cf2ecc..031c1849da14 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -350,6 +350,8 @@ static u32 goya_all_events[] = {
 	GOYA_ASYNC_EVENT_ID_FIX_THERMAL_ENV_E
 };
 
+static s64 goya_state_dump_specs_props[SP_MAX] = {0};
+
 static int goya_mmu_clear_pgt_range(struct hl_device *hdev);
 static int goya_mmu_set_dram_default_page(struct hl_device *hdev);
 static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev);
@@ -387,6 +389,7 @@ int goya_set_fixed_properties(struct hl_device *hdev)
 		prop->hw_queues_props[i].cb_alloc_flags = CB_ALLOC_USER;
 	}
 
+	prop->device_dma_offset_for_host_access = HOST_PHYS_BASE;
 	prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
 
 	prop->dram_base_address = DRAM_PHYS_BASE;
@@ -466,6 +469,8 @@ int goya_set_fixed_properties(struct hl_device *hdev)
 	prop->hard_reset_done_by_fw = false;
 	prop->gic_interrupts_enable = true;
 
+	prop->server_type = HL_SERVER_TYPE_UNKNOWN;
+
 	return 0;
 }
 
@@ -649,14 +654,14 @@ pci_init:
 					GOYA_BOOT_FIT_REQ_TIMEOUT_USEC);
 	if (rc) {
 		if (hdev->reset_on_preboot_fail)
-			hdev->asic_funcs->hw_fini(hdev, true);
+			hdev->asic_funcs->hw_fini(hdev, true, false);
 		goto pci_fini;
 	}
 
 	if (goya_get_hw_state(hdev) == HL_DEVICE_HW_STATE_DIRTY) {
 		dev_info(hdev->dev,
 			"H/W state is dirty, must reset before initializing\n");
-		hdev->asic_funcs->hw_fini(hdev, true);
+		hdev->asic_funcs->hw_fini(hdev, true, false);
 	}
 
 	if (!hdev->pldm) {
@@ -955,8 +960,9 @@ static int goya_sw_init(struct hl_device *hdev)
 	hdev->supports_coresight = true;
 	hdev->supports_soft_reset = true;
 	hdev->allow_external_soft_reset = true;
+	hdev->supports_wait_for_multi_cs = false;
 
-	goya_set_pci_memory_regions(hdev);
+	hdev->asic_funcs->set_pci_memory_regions(hdev);
 
 	return 0;
 
@@ -2374,7 +2380,7 @@ static void goya_disable_timestamp(struct hl_device *hdev)
 	WREG32(mmPSOC_TIMESTAMP_BASE - CFG_BASE, 0);
 }
 
-static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
+static void goya_halt_engines(struct hl_device *hdev, bool hard_reset, bool fw_reset)
 {
 	u32 wait_timeout_ms;
 
@@ -2493,6 +2499,7 @@ static void goya_init_firmware_loader(struct hl_device *hdev)
 	struct fw_load_mgr *fw_loader = &hdev->fw_loader;
 
 	/* fill common fields */
+	fw_loader->linux_loaded = false;
 	fw_loader->boot_fit_img.image_name = GOYA_BOOT_FIT_FILE;
 	fw_loader->linux_img.image_name = GOYA_LINUX_FW_FILE;
 	fw_loader->cpu_timeout = GOYA_CPU_TIMEOUT_USEC;
@@ -2696,14 +2703,7 @@ disable_queues:
 	return rc;
 }
 
-/*
- * goya_hw_fini - Goya hardware tear-down code
- *
- * @hdev: pointer to hl_device structure
- * @hard_reset: should we do hard reset to all engines or just reset the
- *              compute/dma engines
- */
-static void goya_hw_fini(struct hl_device *hdev, bool hard_reset)
+static void goya_hw_fini(struct hl_device *hdev, bool hard_reset, bool fw_reset)
 {
 	struct goya_device *goya = hdev->asic_specific;
 	u32 reset_timeout_ms, cpu_timeout_ms, status;
@@ -2796,7 +2796,7 @@ int goya_resume(struct hl_device *hdev)
 	return goya_init_iatu(hdev);
 }
 
-static int goya_cb_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
+static int goya_mmap(struct hl_device *hdev, struct vm_area_struct *vma,
 			void *cpu_addr, dma_addr_t dma_addr, size_t size)
 {
 	int rc;
@@ -4797,6 +4797,12 @@ void goya_handle_eqe(struct hl_device *hdev, struct hl_eq_entry *eq_entry)
 				>> EQ_CTL_EVENT_TYPE_SHIFT);
 	struct goya_device *goya = hdev->asic_specific;
 
+	if (event_type >= GOYA_ASYNC_EVENT_ID_SIZE) {
+		dev_err(hdev->dev, "Event type %u exceeds maximum of %u",
+				event_type, GOYA_ASYNC_EVENT_ID_SIZE - 1);
+		return;
+	}
+
 	goya->events_stat[event_type]++;
 	goya->events_stat_aggregate[event_type]++;
 
@@ -5475,14 +5481,14 @@ u64 goya_get_device_time(struct hl_device *hdev)
 	return device_time | RREG32(mmPSOC_TIMESTAMP_CNTCVL);
 }
 
-static void goya_collective_wait_init_cs(struct hl_cs *cs)
+static int goya_collective_wait_init_cs(struct hl_cs *cs)
 {
-
+	return 0;
 }
 
 static int goya_collective_wait_create_jobs(struct hl_device *hdev,
 		struct hl_ctx *ctx, struct hl_cs *cs, u32 wait_queue_id,
-		u32 collective_engine_id)
+		u32 collective_engine_id, u32 encaps_signal_offset)
 {
 	return -EINVAL;
 }
@@ -5524,6 +5530,62 @@ static int goya_map_pll_idx_to_fw_idx(u32 pll_idx)
 	}
 }
 
+static int goya_gen_sync_to_engine_map(struct hl_device *hdev,
+				struct hl_sync_to_engine_map *map)
+{
+	/* Not implemented */
+	return 0;
+}
+
+static int goya_monitor_valid(struct hl_mon_state_dump *mon)
+{
+	/* Not implemented */
+	return 0;
+}
+
+static int goya_print_single_monitor(char **buf, size_t *size, size_t *offset,
+				struct hl_device *hdev,
+				struct hl_mon_state_dump *mon)
+{
+	/* Not implemented */
+	return 0;
+}
+
+
+static int goya_print_fences_single_engine(
+	struct hl_device *hdev, u64 base_offset, u64 status_base_offset,
+	enum hl_sync_engine_type engine_type, u32 engine_id, char **buf,
+	size_t *size, size_t *offset)
+{
+	/* Not implemented */
+	return 0;
+}
+
+
+static struct hl_state_dump_specs_funcs goya_state_dump_funcs = {
+	.monitor_valid = goya_monitor_valid,
+	.print_single_monitor = goya_print_single_monitor,
+	.gen_sync_to_engine_map = goya_gen_sync_to_engine_map,
+	.print_fences_single_engine = goya_print_fences_single_engine,
+};
+
+static void goya_state_dump_init(struct hl_device *hdev)
+{
+	/* Not implemented */
+	hdev->state_dump_specs.props = goya_state_dump_specs_props;
+	hdev->state_dump_specs.funcs = goya_state_dump_funcs;
+}
+
+static u32 goya_get_sob_addr(struct hl_device *hdev, u32 sob_id)
+{
+	return 0;
+}
+
+static u32 *goya_get_stream_master_qid_arr(void)
+{
+	return NULL;
+}
+
 static const struct hl_asic_funcs goya_funcs = {
 	.early_init = goya_early_init,
 	.early_fini = goya_early_fini,
@@ -5536,7 +5598,7 @@ static const struct hl_asic_funcs goya_funcs = {
 	.halt_engines = goya_halt_engines,
 	.suspend = goya_suspend,
 	.resume = goya_resume,
-	.cb_mmap = goya_cb_mmap,
+	.mmap = goya_mmap,
 	.ring_doorbell = goya_ring_doorbell,
 	.pqe_write = goya_pqe_write,
 	.asic_dma_alloc_coherent = goya_dma_alloc_coherent,
@@ -5609,7 +5671,11 @@ static const struct hl_asic_funcs goya_funcs = {
 	.enable_events_from_fw = goya_enable_events_from_fw,
 	.map_pll_idx_to_fw_idx = goya_map_pll_idx_to_fw_idx,
 	.init_firmware_loader = goya_init_firmware_loader,
-	.init_cpu_scrambler_dram = goya_cpu_init_scrambler_dram
+	.init_cpu_scrambler_dram = goya_cpu_init_scrambler_dram,
+	.state_dump_init = goya_state_dump_init,
+	.get_sob_addr = &goya_get_sob_addr,
+	.set_pci_memory_regions = goya_set_pci_memory_regions,
+	.get_stream_master_qid_arr = goya_get_stream_master_qid_arr,
 };
 
 /*
diff --git a/drivers/misc/habanalabs/include/common/cpucp_if.h b/drivers/misc/habanalabs/include/common/cpucp_if.h
index 80b1d5a9d9f1..9ff6a448f0d4 100644
--- a/drivers/misc/habanalabs/include/common/cpucp_if.h
+++ b/drivers/misc/habanalabs/include/common/cpucp_if.h
@@ -98,6 +98,18 @@ struct hl_eq_fw_alive {
 	__u8 pad[7];
 };
 
+enum hl_pcie_addr_dec_cause {
+	PCIE_ADDR_DEC_HBW_ERR_RESP,
+	PCIE_ADDR_DEC_LBW_ERR_RESP,
+	PCIE_ADDR_DEC_TLP_BLOCKED_BY_RR
+};
+
+struct hl_eq_pcie_addr_dec_data {
+	/* enum hl_pcie_addr_dec_cause */
+	__u8 addr_dec_cause;
+	__u8 pad[7];
+};
+
 struct hl_eq_entry {
 	struct hl_eq_header hdr;
 	union {
@@ -106,6 +118,7 @@ struct hl_eq_entry {
 		struct hl_eq_sm_sei_data sm_sei_data;
 		struct cpucp_pkt_sync_err pkt_sync_err;
 		struct hl_eq_fw_alive fw_alive;
+		struct hl_eq_pcie_addr_dec_data pcie_addr_dec_data;
 		__le64 data[7];
 	};
 };
@@ -116,7 +129,7 @@ struct hl_eq_entry {
 #define EQ_CTL_READY_MASK		0x80000000
 
 #define EQ_CTL_EVENT_TYPE_SHIFT		16
-#define EQ_CTL_EVENT_TYPE_MASK		0x03FF0000
+#define EQ_CTL_EVENT_TYPE_MASK		0x0FFF0000
 
 #define EQ_CTL_INDEX_SHIFT		0
 #define EQ_CTL_INDEX_MASK		0x0000FFFF
@@ -300,7 +313,7 @@ enum pq_init_status {
  *       The packet's arguments specify the desired sensor and the field to
  *       set.
  *
- * CPUCP_PACKET_PCIE_THROUGHPUT_GET
+ * CPUCP_PACKET_PCIE_THROUGHPUT_GET -
  *       Get throughput of PCIe.
  *       The packet's arguments specify the transaction direction (TX/RX).
  *       The window measurement is 10[msec], and the return value is in KB/sec.
@@ -309,19 +322,19 @@ enum pq_init_status {
  *       Replay count measures number of "replay" events, which is basicly
  *       number of retries done by PCIe.
  *
- * CPUCP_PACKET_TOTAL_ENERGY_GET
+ * CPUCP_PACKET_TOTAL_ENERGY_GET -
  *       Total Energy is measurement of energy from the time FW Linux
  *       is loaded. It is calculated by multiplying the average power
  *       by time (passed from armcp start). The units are in MilliJouls.
  *
- * CPUCP_PACKET_PLL_INFO_GET
+ * CPUCP_PACKET_PLL_INFO_GET -
  *       Fetch frequencies of PLL from the required PLL IP.
  *       The packet's arguments specify the device PLL type
  *       Pll type is the PLL from device pll_index enum.
  *       The result is composed of 4 outputs, each is 16-bit
  *       frequency in MHz.
  *
- * CPUCP_PACKET_POWER_GET
+ * CPUCP_PACKET_POWER_GET -
  *       Fetch the present power consumption of the device (Current * Voltage).
  *
  * CPUCP_PACKET_NIC_PFC_SET -
@@ -345,6 +358,24 @@ enum pq_init_status {
  * CPUCP_PACKET_MSI_INFO_SET -
  *       set the index number for each supported msi type going from
  *       host to device
+ *
+ * CPUCP_PACKET_NIC_XPCS91_REGS_GET -
+ *       Fetch the un/correctable counters values from the NIC MAC.
+ *
+ * CPUCP_PACKET_NIC_STAT_REGS_GET -
+ *       Fetch various NIC MAC counters from the NIC STAT.
+ *
+ * CPUCP_PACKET_NIC_STAT_REGS_CLR -
+ *       Clear the various NIC MAC counters in the NIC STAT.
+ *
+ * CPUCP_PACKET_NIC_STAT_REGS_ALL_GET -
+ *       Fetch all NIC MAC counters from the NIC STAT.
+ *
+ * CPUCP_PACKET_IS_IDLE_CHECK -
+ *       Check if the device is IDLE in regard to the DMA/compute engines
+ *       and QMANs. The f/w will return a bitmask where each bit represents
+ *       a different engine or QMAN according to enum cpucp_idle_mask.
+ *       The bit will be 1 if the engine is NOT idle.
  */
 
 enum cpucp_packet_id {
@@ -385,6 +416,11 @@ enum cpucp_packet_id {
 	CPUCP_PACKET_NIC_LPBK_SET,		/* internal */
 	CPUCP_PACKET_NIC_MAC_CFG,		/* internal */
 	CPUCP_PACKET_MSI_INFO_SET,		/* internal */
+	CPUCP_PACKET_NIC_XPCS91_REGS_GET,	/* internal */
+	CPUCP_PACKET_NIC_STAT_REGS_GET,		/* internal */
+	CPUCP_PACKET_NIC_STAT_REGS_CLR,		/* internal */
+	CPUCP_PACKET_NIC_STAT_REGS_ALL_GET,	/* internal */
+	CPUCP_PACKET_IS_IDLE_CHECK,		/* internal */
 };
 
 #define CPUCP_PACKET_FENCE_VAL	0xFE8CE7A5
@@ -414,6 +450,11 @@ enum cpucp_packet_id {
 #define CPUCP_PKT_VAL_LPBK_IN2_SHIFT	1
 #define CPUCP_PKT_VAL_LPBK_IN2_MASK	0x000000000000001Eull
 
+#define CPUCP_PKT_VAL_MAC_CNT_IN1_SHIFT	0
+#define CPUCP_PKT_VAL_MAC_CNT_IN1_MASK	0x0000000000000001ull
+#define CPUCP_PKT_VAL_MAC_CNT_IN2_SHIFT	1
+#define CPUCP_PKT_VAL_MAC_CNT_IN2_MASK	0x00000000FFFFFFFEull
+
 /* heartbeat status bits */
 #define CPUCP_PKT_HB_STATUS_EQ_FAULT_SHIFT		0
 #define CPUCP_PKT_HB_STATUS_EQ_FAULT_MASK		0x00000001
@@ -467,7 +508,8 @@ struct cpucp_packet {
 		__le32 status_mask;
 	};
 
-	__le32 reserved;
+	/* For NIC requests */
+	__le32 port_index;
 };
 
 struct cpucp_unmask_irq_arr_packet {
@@ -476,6 +518,12 @@ struct cpucp_unmask_irq_arr_packet {
 	__le32 irqs[0];
 };
 
+struct cpucp_nic_status_packet {
+	struct cpucp_packet cpucp_pkt;
+	__le32 length;
+	__le32 data[0];
+};
+
 struct cpucp_array_data_packet {
 	struct cpucp_packet cpucp_pkt;
 	__le32 length;
@@ -595,6 +643,18 @@ enum pll_index {
 	PLL_MAX
 };
 
+enum rl_index {
+	TPC_RL = 0,
+	MME_RL,
+};
+
+enum pvt_index {
+	PVT_SW,
+	PVT_SE,
+	PVT_NW,
+	PVT_NE
+};
+
 /* Event Queue Packets */
 
 struct eq_generic_event {
@@ -700,6 +760,15 @@ struct cpucp_mac_addr {
 	__u8 mac_addr[ETH_ALEN];
 };
 
+enum cpucp_serdes_type {
+	TYPE_1_SERDES_TYPE,
+	TYPE_2_SERDES_TYPE,
+	HLS1_SERDES_TYPE,
+	HLS1H_SERDES_TYPE,
+	UNKNOWN_SERDES_TYPE,
+	MAX_NUM_SERDES_TYPE = UNKNOWN_SERDES_TYPE
+};
+
 struct cpucp_nic_info {
 	struct cpucp_mac_addr mac_addrs[CPUCP_MAX_NICS];
 	__le64 link_mask[CPUCP_NIC_MASK_ARR_LEN];
@@ -708,6 +777,40 @@ struct cpucp_nic_info {
 	__le64 link_ext_mask[CPUCP_NIC_MASK_ARR_LEN];
 	__u8 qsfp_eeprom[CPUCP_NIC_QSFP_EEPROM_MAX_LEN];
 	__le64 auto_neg_mask[CPUCP_NIC_MASK_ARR_LEN];
+	__le16 serdes_type; /* enum cpucp_serdes_type */
+	__u8 reserved[6];
+};
+
+/*
+ * struct cpucp_nic_status - describes the status of a NIC port.
+ * @port: NIC port index.
+ * @bad_format_cnt: e.g. CRC.
+ * @responder_out_of_sequence_psn_cnt: e.g NAK.
+ * @high_ber_reinit_cnt: link reinit due to high BER.
+ * @correctable_err_cnt: e.g. bit-flip.
+ * @uncorrectable_err_cnt: e.g. MAC errors.
+ * @retraining_cnt: re-training counter.
+ * @up: is port up.
+ * @pcs_link: has PCS link.
+ * @phy_ready: is PHY ready.
+ * @auto_neg: is Autoneg enabled.
+ * @timeout_retransmission_cnt: timeout retransmission events
+ * @high_ber_cnt: high ber events
+ */
+struct cpucp_nic_status {
+	__le32 port;
+	__le32 bad_format_cnt;
+	__le32 responder_out_of_sequence_psn_cnt;
+	__le32 high_ber_reinit;
+	__le32 correctable_err_cnt;
+	__le32 uncorrectable_err_cnt;
+	__le32 retraining_cnt;
+	__u8 up;
+	__u8 pcs_link;
+	__u8 phy_ready;
+	__u8 auto_neg;
+	__le32 timeout_retransmission_cnt;
+	__le32 high_ber_cnt;
 };
 
 #endif /* CPUCP_IF_H */
diff --git a/drivers/misc/habanalabs/include/common/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index fa8a5ad2d438..3099653234e4 100644
--- a/drivers/misc/habanalabs/include/common/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -78,6 +78,26 @@
  * CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL	Device is unusable and customer support
  *					should be contacted.
  *
+ * CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD	HALT ACK from ARC0 is not received
+ *					within specified retries after issuing
+ *					HALT request. ARC0 appears to be in bad
+ *					reset.
+ *
+ * CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD	HALT ACK from ARC1 is not received
+ *					within specified retries after issuing
+ *					HALT request. ARC1 appears to be in bad
+ *					reset.
+ *
+ * CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD	RUN ACK from ARC0 is not received
+ *					within specified timeout after issuing
+ *					RUN request. ARC0 appears to be in bad
+ *					reset.
+ *
+ * CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD	RUN ACK from ARC1 is not received
+ *					within specified timeout after issuing
+ *					RUN request. ARC1 appears to be in bad
+ *					reset.
+ *
  * CPU_BOOT_ERR0_ENABLED		Error registers enabled.
  *					This is a main indication that the
  *					running FW populates the error
@@ -98,6 +118,10 @@
 #define CPU_BOOT_ERR0_SEC_IMG_VER_FAIL		(1 << 11)
 #define CPU_BOOT_ERR0_PLL_FAIL			(1 << 12)
 #define CPU_BOOT_ERR0_DEVICE_UNUSABLE_FAIL	(1 << 13)
+#define CPU_BOOT_ERR0_ARC0_HALT_ACK_NOT_RCVD	(1 << 14)
+#define CPU_BOOT_ERR0_ARC1_HALT_ACK_NOT_RCVD	(1 << 15)
+#define CPU_BOOT_ERR0_ARC0_RUN_ACK_NOT_RCVD	(1 << 16)
+#define CPU_BOOT_ERR0_ARC1_RUN_ACK_NOT_RCVD	(1 << 17)
 #define CPU_BOOT_ERR0_ENABLED			(1 << 31)
 #define CPU_BOOT_ERR1_ENABLED			(1 << 31)
 
@@ -186,6 +210,10 @@
  *					configured and is ready for use.
  *					Initialized in: ppboot
  *
+ * CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN	NIC MAC channels init is done by FW and
+ *					any access to them is done via the FW.
+ *					Initialized in: linux
+ *
  * CPU_BOOT_DEV_STS0_DYN_PLL_EN		Dynamic PLL configuration is enabled.
  *					FW sends to host a bitmap of supported
  *					PLLs.
@@ -209,6 +237,21 @@
  *					prevent IRQs overriding each other.
  *					Initialized in: linux
  *
+ * CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN
+ *					NIC STAT and XPCS91 access is restricted
+ *					and is done via FW only.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN
+ *					NIC STAT get all is supported.
+ *					Initialized in: linux
+ *
+ * CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN
+ *					F/W checks if the device is idle by reading defined set
+ *					of registers. It returns a bitmask of all the engines,
+ *					where a bit is set if the engine is not idle.
+ *					Initialized in: linux
+ *
  * CPU_BOOT_DEV_STS0_ENABLED		Device status register enabled.
  *					This is a main indication that the
  *					running FW populates the device status
@@ -236,10 +279,14 @@
 #define CPU_BOOT_DEV_STS0_PKT_PI_ACK_EN			(1 << 15)
 #define CPU_BOOT_DEV_STS0_FW_LD_COM_EN			(1 << 16)
 #define CPU_BOOT_DEV_STS0_FW_IATU_CONF_EN		(1 << 17)
+#define CPU_BOOT_DEV_STS0_FW_NIC_MAC_EN			(1 << 18)
 #define CPU_BOOT_DEV_STS0_DYN_PLL_EN			(1 << 19)
 #define CPU_BOOT_DEV_STS0_GIC_PRIVILEGED_EN		(1 << 20)
 #define CPU_BOOT_DEV_STS0_EQ_INDEX_EN			(1 << 21)
 #define CPU_BOOT_DEV_STS0_MULTI_IRQ_POLL_EN		(1 << 22)
+#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_XPCS91_EN		(1 << 23)
+#define CPU_BOOT_DEV_STS0_FW_NIC_STAT_EXT_EN		(1 << 24)
+#define CPU_BOOT_DEV_STS0_IS_IDLE_CHECK_EN		(1 << 25)
 #define CPU_BOOT_DEV_STS0_ENABLED			(1 << 31)
 #define CPU_BOOT_DEV_STS1_ENABLED			(1 << 31)
 
@@ -313,10 +360,7 @@ struct cpu_dyn_regs {
 	__le32 hw_state;
 	__le32 kmd_msg_to_cpu;
 	__le32 cpu_cmd_status_to_host;
-	union {
-		__le32 gic_host_irq_ctrl;
-		__le32 gic_host_pi_upd_irq;
-	};
+	__le32 gic_host_pi_upd_irq;
 	__le32 gic_tpc_qm_irq_ctrl;
 	__le32 gic_mme_qm_irq_ctrl;
 	__le32 gic_dma_qm_irq_ctrl;
@@ -324,7 +368,9 @@ struct cpu_dyn_regs {
 	__le32 gic_dma_core_irq_ctrl;
 	__le32 gic_host_halt_irq;
 	__le32 gic_host_ints_irq;
-	__le32 reserved1[24];		/* reserve for future use */
+	__le32 gic_host_soft_rst_irq;
+	__le32 gic_rot_qm_irq_ctrl;
+	__le32 reserved1[22];		/* reserve for future use */
 };
 
 /* TODO: remove the desc magic after the code is updated to use message */
@@ -462,6 +508,11 @@ struct lkd_fw_comms_msg {
  *				Do not wait for BMC response.
  *
  * COMMS_LOW_PLL_OPP		Initialize PLLs for low OPP.
+ *
+ * COMMS_PREP_DESC_ELBI		Same as COMMS_PREP_DESC only that the memory
+ *				space is allocated in a ELBI access only
+ *				address range.
+ *
  */
 enum comms_cmd {
 	COMMS_NOOP = 0,
@@ -474,6 +525,7 @@ enum comms_cmd {
 	COMMS_GOTO_WFE = 7,
 	COMMS_SKIP_BMC = 8,
 	COMMS_LOW_PLL_OPP = 9,
+	COMMS_PREP_DESC_ELBI = 10,
 	COMMS_INVLD_LAST
 };
 
diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
index 5bb54b34a8ae..ffdfbd9b3220 100644
--- a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
+++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
@@ -126,6 +126,9 @@
 #define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_1                     0x4F2004
 #define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_SOB_OBJ_2047                  0x4F3FFC
 #define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0               0x4F4000
+#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_ADDRH_0               0x4F4800
+#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_PAY_DATA_0                0x4F5000
+#define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_ARM_0                     0x4F5800
 #define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_0                  0x4F6000
 #define mmSYNC_MNGR_E_N_SYNC_MNGR_OBJS_MON_STATUS_511                0x4F67FC
 
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
index 9aea7e996654..acc85d3ed98b 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
@@ -449,4 +449,21 @@ enum axi_id {
 #define PCIE_AUX_FLR_CTRL_HW_CTRL_MASK                               0x1
 #define PCIE_AUX_FLR_CTRL_INT_MASK_MASK                              0x2
 
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_VALID_SHIFT        0
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_VALID_MASK         0x1
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_PENDING_SHIFT      1
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_STATUS_0_PENDING_MASK       0x1FE
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_SHIFT             0
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SID_MASK              0xFF
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_SHIFT            8
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_MASK_MASK             0xFF00
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOP_SHIFT             16
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOP_MASK              0x10000
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOD_SHIFT             17
+#define SYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_ARM_0_SOD_MASK              0xFFFE0000
+#define TPC0_QM_CP_STS_0_FENCE_ID_SHIFT                              20
+#define TPC0_QM_CP_STS_0_FENCE_ID_MASK                               0x300000
+#define TPC0_QM_CP_STS_0_FENCE_IN_PROGRESS_SHIFT                     22
+#define TPC0_QM_CP_STS_0_FENCE_IN_PROGRESS_MASK                      0x400000
+
 #endif /* GAUDI_MASKS_H_ */
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
index d95d4162ae2c..b9bd5a7f71eb 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_reg_map.h
@@ -12,8 +12,6 @@
  * PSOC scratch-pad registers
  */
 #define mmHW_STATE			mmPSOC_GLOBAL_CONF_SCRATCHPAD_0
-/* TODO: remove mmGIC_HOST_IRQ_CTRL_POLL_REG */
-#define mmGIC_HOST_IRQ_CTRL_POLL_REG	mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
 #define mmGIC_HOST_PI_UPD_IRQ_POLL_REG	mmPSOC_GLOBAL_CONF_SCRATCHPAD_1
 #define mmGIC_TPC_QM_IRQ_CTRL_POLL_REG	mmPSOC_GLOBAL_CONF_SCRATCHPAD_2
 #define mmGIC_MME_QM_IRQ_CTRL_POLL_REG	mmPSOC_GLOBAL_CONF_SCRATCHPAD_3
diff --git a/drivers/misc/pci_endpoint_test.c b/drivers/misc/pci_endpoint_test.c
index d1137a95ad02..2ed7e3aaff3a 100644
--- a/drivers/misc/pci_endpoint_test.c
+++ b/drivers/misc/pci_endpoint_test.c
@@ -69,6 +69,8 @@
 #define FLAG_USE_DMA				BIT(0)
 
 #define PCI_DEVICE_ID_TI_AM654			0xb00c
+#define PCI_DEVICE_ID_TI_J7200			0xb00f
+#define PCI_DEVICE_ID_TI_AM64			0xb010
 #define PCI_DEVICE_ID_LS1088A			0x80c0
 
 #define is_am654_pci_dev(pdev)		\
@@ -970,6 +972,12 @@ static const struct pci_device_id pci_endpoint_test_tbl[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J721E),
 	  .driver_data = (kernel_ulong_t)&j721e_data,
 	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_J7200),
+	  .driver_data = (kernel_ulong_t)&j721e_data,
+	},
+	{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCI_DEVICE_ID_TI_AM64),
+	  .driver_data = (kernel_ulong_t)&j721e_data,
+	},
 	{ }
 };
 MODULE_DEVICE_TABLE(pci, pci_endpoint_test_tbl);
@@ -979,6 +987,7 @@ static struct pci_driver pci_endpoint_test_driver = {
 	.id_table	= pci_endpoint_test_tbl,
 	.probe		= pci_endpoint_test_probe,
 	.remove		= pci_endpoint_test_remove,
+	.sriov_configure = pci_sriov_configure_simple,
 };
 module_pci_driver(pci_endpoint_test_driver);
 
diff --git a/drivers/mtd/nand/raw/intel-nand-controller.c b/drivers/mtd/nand/raw/intel-nand-controller.c
index 29e8a546dcd6..b9784f3da7a1 100644
--- a/drivers/mtd/nand/raw/intel-nand-controller.c
+++ b/drivers/mtd/nand/raw/intel-nand-controller.c
@@ -20,6 +20,7 @@
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/types.h>
+#include <linux/units.h>
 #include <asm/unaligned.h>
 
 #define EBU_CLC			0x000
@@ -102,7 +103,6 @@
 
 #define MAX_CS	2
 
-#define HZ_PER_MHZ	1000000L
 #define USEC_PER_SEC	1000000L
 
 struct ebu_nand_cs {
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index a4a202b9a0a2..6006c2e8fa2b 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -96,7 +96,7 @@ static int ad_marker_send(struct port *port, struct bond_marker *marker);
 static void ad_mux_machine(struct port *port, bool *update_slave_arr);
 static void ad_rx_machine(struct lacpdu *lacpdu, struct port *port);
 static void ad_tx_machine(struct port *port);
-static void ad_periodic_machine(struct port *port, struct bond_params bond_params);
+static void ad_periodic_machine(struct port *port, struct bond_params *bond_params);
 static void ad_port_selection_logic(struct port *port, bool *update_slave_arr);
 static void ad_agg_selection_logic(struct aggregator *aggregator,
 				   bool *update_slave_arr);
@@ -1298,7 +1298,7 @@ static void ad_tx_machine(struct port *port)
  *
  * Turn ntt flag on priodically to perform periodic transmission of lacpdu's.
  */
-static void ad_periodic_machine(struct port *port, struct bond_params bond_params)
+static void ad_periodic_machine(struct port *port, struct bond_params *bond_params)
 {
 	periodic_states_t last_state;
 
@@ -1308,7 +1308,7 @@ static void ad_periodic_machine(struct port *port, struct bond_params bond_param
 	/* check if port was reinitialized */
 	if (((port->sm_vars & AD_PORT_BEGIN) || !(port->sm_vars & AD_PORT_LACP_ENABLED) || !port->is_enabled) ||
 	    (!(port->actor_oper_port_state & LACP_STATE_LACP_ACTIVITY) && !(port->partner_oper.port_state & LACP_STATE_LACP_ACTIVITY)) ||
-	    !bond_params.lacp_active) {
+	    !bond_params->lacp_active) {
 		port->sm_periodic_state = AD_NO_PERIODIC;
 	}
 	/* check if state machine should change state */
@@ -2342,7 +2342,7 @@ void bond_3ad_state_machine_handler(struct work_struct *work)
 		}
 
 		ad_rx_machine(NULL, port);
-		ad_periodic_machine(port, bond->params);
+		ad_periodic_machine(port, &bond->params);
 		ad_port_selection_logic(port, &update_slave_arr);
 		ad_mux_machine(port, &update_slave_arr);
 		ad_tx_machine(port);
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index b0966e733926..77dc79a7f574 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2169,7 +2169,7 @@ int bond_enslave(struct net_device *bond_dev, struct net_device *slave_dev,
 			res = -EOPNOTSUPP;
 			goto err_sysfs_del;
 		}
-	} else {
+	} else if (bond->xdp_prog) {
 		struct netdev_bpf xdp = {
 			.command = XDP_SETUP_PROG,
 			.flags   = 0,
@@ -2910,9 +2910,9 @@ static void bond_arp_send_all(struct bonding *bond, struct slave *slave)
 			 * probe to generate any traffic (arp_validate=0)
 			 */
 			if (bond->params.arp_validate)
-				net_warn_ratelimited("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
-						     bond->dev->name,
-						     &targets[i]);
+				pr_warn_once("%s: no route to arp_ip_target %pI4 and arp_validate is set\n",
+					     bond->dev->name,
+					     &targets[i]);
 			bond_arp_send(slave, ARPOP_REQUEST, targets[i],
 				      0, tags);
 			continue;
@@ -5224,13 +5224,12 @@ static int bond_xdp_set(struct net_device *dev, struct bpf_prog *prog,
 			bpf_prog_inc(prog);
 	}
 
-	if (old_prog)
-		bpf_prog_put(old_prog);
-
-	if (prog)
+	if (prog) {
 		static_branch_inc(&bpf_master_redirect_enabled_key);
-	else
+	} else if (old_prog) {
+		bpf_prog_put(old_prog);
 		static_branch_dec(&bpf_master_redirect_enabled_key);
+	}
 
 	return 0;
 
diff --git a/drivers/net/can/c_can/c_can_ethtool.c b/drivers/net/can/c_can/c_can_ethtool.c
index cd5f07fca2a5..377c7d2e7612 100644
--- a/drivers/net/can/c_can/c_can_ethtool.c
+++ b/drivers/net/can/c_can/c_can_ethtool.c
@@ -15,10 +15,8 @@ static void c_can_get_drvinfo(struct net_device *netdev,
 			      struct ethtool_drvinfo *info)
 {
 	struct c_can_priv *priv = netdev_priv(netdev);
-	struct platform_device *pdev = to_platform_device(priv->device);
-
 	strscpy(info->driver, "c_can", sizeof(info->driver));
-	strscpy(info->bus_info, pdev->name, sizeof(info->bus_info));
+	strscpy(info->bus_info, dev_name(priv->device), sizeof(info->bus_info));
 }
 
 static void c_can_get_ringparam(struct net_device *netdev,
diff --git a/drivers/net/can/rcar/rcar_canfd.c b/drivers/net/can/rcar/rcar_canfd.c
index c47988d3674e..ff9d0f5ae0dd 100644
--- a/drivers/net/can/rcar/rcar_canfd.c
+++ b/drivers/net/can/rcar/rcar_canfd.c
@@ -2017,7 +2017,7 @@ static int __maybe_unused rcar_canfd_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(rcar_canfd_pm_ops, rcar_canfd_suspend,
 			 rcar_canfd_resume);
 
-static const struct of_device_id rcar_canfd_of_table[] = {
+static const __maybe_unused struct of_device_id rcar_canfd_of_table[] = {
 	{ .compatible = "renesas,rcar-gen3-canfd", .data = (void *)RENESAS_RCAR_GEN3 },
 	{ .compatible = "renesas,rzg2l-canfd", .data = (void *)RENESAS_RZG2L },
 	{ }
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c
index bd1417a66cbf..604f54112665 100644
--- a/drivers/net/dsa/b53/b53_common.c
+++ b/drivers/net/dsa/b53/b53_common.c
@@ -1144,7 +1144,7 @@ static void b53_force_link(struct b53_device *dev, int port, int link)
 	u8 reg, val, off;
 
 	/* Override the port settings */
-	if (port == dev->cpu_port) {
+	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
 	} else {
@@ -1168,7 +1168,7 @@ static void b53_force_port_config(struct b53_device *dev, int port,
 	u8 reg, val, off;
 
 	/* Override the port settings */
-	if (port == dev->cpu_port) {
+	if (port == dev->imp_port) {
 		off = B53_PORT_OVERRIDE_CTRL;
 		val = PORT_OVERRIDE_EN;
 	} else {
@@ -1236,7 +1236,7 @@ static void b53_adjust_link(struct dsa_switch *ds, int port,
 	b53_force_link(dev, port, phydev->link);
 
 	if (is531x5(dev) && phy_interface_is_rgmii(phydev)) {
-		if (port == 8)
+		if (port == dev->imp_port)
 			off = B53_RGMII_CTRL_IMP;
 		else
 			off = B53_RGMII_CTRL_P(port);
@@ -2280,6 +2280,7 @@ struct b53_chip_data {
 	const char *dev_name;
 	u16 vlans;
 	u16 enabled_ports;
+	u8 imp_port;
 	u8 cpu_port;
 	u8 vta_regs[3];
 	u8 arl_bins;
@@ -2304,6 +2305,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 2,
 		.arl_buckets = 1024,
+		.imp_port = 5,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2314,6 +2316,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 2,
 		.arl_buckets = 1024,
+		.imp_port = 5,
 		.cpu_port = B53_CPU_PORT_25,
 		.duplex_reg = B53_DUPLEX_STAT_FE,
 	},
@@ -2324,6 +2327,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2337,6 +2341,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2350,6 +2355,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2363,6 +2369,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x7f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_9798,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2377,6 +2384,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.arl_bins = 4,
 		.arl_buckets = 1024,
 		.vta_regs = B53_VTA_REGS,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
 		.jumbo_pm_reg = B53_JUMBO_PORT_MASK,
@@ -2389,6 +2397,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0xff,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2402,6 +2411,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2415,6 +2425,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0, /* pdata must provide them */
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS_63XX,
 		.duplex_reg = B53_DUPLEX_STAT_63XX,
@@ -2428,6 +2439,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2441,6 +2453,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1bf,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2454,6 +2467,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1bf,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2467,6 +2481,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2480,6 +2495,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1f,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT_25, /* TODO: auto detect */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2493,6 +2509,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2506,6 +2523,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x103,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2520,6 +2538,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1bf,
 		.arl_bins = 4,
 		.arl_buckets = 256,
+		.imp_port = 8,
 		.cpu_port = 8, /* TODO: ports 4, 5, 8 */
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2533,6 +2552,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
 		.arl_buckets = 1024,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2546,6 +2566,7 @@ static const struct b53_chip_data b53_switch_chips[] = {
 		.enabled_ports = 0x1ff,
 		.arl_bins = 4,
 		.arl_buckets = 256,
+		.imp_port = 8,
 		.cpu_port = B53_CPU_PORT,
 		.vta_regs = B53_VTA_REGS,
 		.duplex_reg = B53_DUPLEX_STAT_GE,
@@ -2571,6 +2592,7 @@ static int b53_switch_init(struct b53_device *dev)
 			dev->vta_regs[1] = chip->vta_regs[1];
 			dev->vta_regs[2] = chip->vta_regs[2];
 			dev->jumbo_pm_reg = chip->jumbo_pm_reg;
+			dev->imp_port = chip->imp_port;
 			dev->cpu_port = chip->cpu_port;
 			dev->num_vlans = chip->vlans;
 			dev->num_arl_bins = chip->arl_bins;
@@ -2612,9 +2634,10 @@ static int b53_switch_init(struct b53_device *dev)
 			dev->cpu_port = 5;
 	}
 
-	/* cpu port is always last */
-	dev->num_ports = dev->cpu_port + 1;
 	dev->enabled_ports |= BIT(dev->cpu_port);
+	dev->num_ports = fls(dev->enabled_ports);
+
+	dev->ds->num_ports = min_t(unsigned int, dev->num_ports, DSA_MAX_PORTS);
 
 	/* Include non standard CPU port built-in PHYs to be probed */
 	if (is539x(dev) || is531x5(dev)) {
@@ -2660,7 +2683,6 @@ struct b53_device *b53_switch_alloc(struct device *base,
 		return NULL;
 
 	ds->dev = base;
-	ds->num_ports = DSA_MAX_PORTS;
 
 	dev = devm_kzalloc(base, sizeof(*dev), GFP_KERNEL);
 	if (!dev)
diff --git a/drivers/net/dsa/b53/b53_priv.h b/drivers/net/dsa/b53/b53_priv.h
index 9bf8319342b0..5d068acf7cf8 100644
--- a/drivers/net/dsa/b53/b53_priv.h
+++ b/drivers/net/dsa/b53/b53_priv.h
@@ -123,6 +123,7 @@ struct b53_device {
 
 	/* used ports mask */
 	u16 enabled_ports;
+	unsigned int imp_port;
 	unsigned int cpu_port;
 
 	/* connect specific data */
diff --git a/drivers/net/dsa/lantiq_gswip.c b/drivers/net/dsa/lantiq_gswip.c
index e78026ef6d8c..64d6dfa83122 100644
--- a/drivers/net/dsa/lantiq_gswip.c
+++ b/drivers/net/dsa/lantiq_gswip.c
@@ -843,7 +843,8 @@ static int gswip_setup(struct dsa_switch *ds)
 
 	gswip_switch_mask(priv, 0, GSWIP_MAC_CTRL_2_MLEN,
 			  GSWIP_MAC_CTRL_2p(cpu_port));
-	gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8, GSWIP_MAC_FLEN);
+	gswip_switch_w(priv, VLAN_ETH_FRAME_LEN + 8 + ETH_FCS_LEN,
+		       GSWIP_MAC_FLEN);
 	gswip_switch_mask(priv, 0, GSWIP_BM_QUEUE_GCTRL_GL_MOD,
 			  GSWIP_BM_QUEUE_GCTRL);
 
diff --git a/drivers/net/ethernet/3com/3c59x.c b/drivers/net/ethernet/3com/3c59x.c
index 17c16333a412..7b0ae9efc004 100644
--- a/drivers/net/ethernet/3com/3c59x.c
+++ b/drivers/net/ethernet/3com/3c59x.c
@@ -2786,7 +2786,7 @@ static void
 dump_tx_ring(struct net_device *dev)
 {
 	if (vortex_debug > 0) {
-	struct vortex_private *vp = netdev_priv(dev);
+		struct vortex_private *vp = netdev_priv(dev);
 		void __iomem *ioaddr = vp->ioaddr;
 
 		if (vp->full_bus_master_tx) {
diff --git a/drivers/net/ethernet/broadcom/bnx2.c b/drivers/net/ethernet/broadcom/bnx2.c
index a705e2615307..8c83973adca5 100644
--- a/drivers/net/ethernet/broadcom/bnx2.c
+++ b/drivers/net/ethernet/broadcom/bnx2.c
@@ -8038,9 +8038,9 @@ bnx2_get_pci_speed(struct bnx2 *bp)
 static void
 bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 {
+	unsigned int len;
 	int rc, i, j;
 	u8 *data;
-	unsigned int block_end, rosize, len;
 
 #define BNX2_VPD_NVRAM_OFFSET	0x300
 #define BNX2_VPD_LEN		128
@@ -8057,38 +8057,21 @@ bnx2_read_vpd_fw_ver(struct bnx2 *bp)
 	for (i = 0; i < BNX2_VPD_LEN; i += 4)
 		swab32s((u32 *)&data[i]);
 
-	i = pci_vpd_find_tag(data, BNX2_VPD_LEN, PCI_VPD_LRDT_RO_DATA);
-	if (i < 0)
-		goto vpd_done;
-
-	rosize = pci_vpd_lrdt_size(&data[i]);
-	i += PCI_VPD_LRDT_TAG_SIZE;
-	block_end = i + rosize;
-
-	if (block_end > BNX2_VPD_LEN)
-		goto vpd_done;
-
-	j = pci_vpd_find_info_keyword(data, i, rosize,
-				      PCI_VPD_RO_KEYWORD_MFR_ID);
+	j = pci_vpd_find_ro_info_keyword(data, BNX2_VPD_LEN,
+					 PCI_VPD_RO_KEYWORD_MFR_ID, &len);
 	if (j < 0)
 		goto vpd_done;
 
-	len = pci_vpd_info_field_size(&data[j]);
-
-	j += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (j + len > block_end || len != 4 ||
-	    memcmp(&data[j], "1028", 4))
+	if (len != 4 || memcmp(&data[j], "1028", 4))
 		goto vpd_done;
 
-	j = pci_vpd_find_info_keyword(data, i, rosize,
-				      PCI_VPD_RO_KEYWORD_VENDOR0);
+	j = pci_vpd_find_ro_info_keyword(data, BNX2_VPD_LEN,
+					 PCI_VPD_RO_KEYWORD_VENDOR0,
+					 &len);
 	if (j < 0)
 		goto vpd_done;
 
-	len = pci_vpd_info_field_size(&data[j]);
-
-	j += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (j + len > block_end || len > BNX2_MAX_VER_SLEN)
+	if (len > BNX2_MAX_VER_SLEN)
 		goto vpd_done;
 
 	memcpy(bp->fw_version, &data[j], len);
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
index d04994840b87..e789430f407c 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h
@@ -2407,7 +2407,6 @@ void bnx2x_igu_clear_sb_gen(struct bnx2x *bp, u8 func, u8 idu_sb_id,
 #define ETH_MAX_RX_CLIENTS_E2		ETH_MAX_RX_CLIENTS_E1H
 #endif
 
-#define BNX2X_VPD_LEN			128
 #define VENDOR_ID_LEN			4
 
 #define VF_ACQUIRE_THRESH		3
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
index 6d98134913cd..ae87296ae1ff 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c
@@ -12189,86 +12189,35 @@ static int bnx2x_get_hwinfo(struct bnx2x *bp)
 
 static void bnx2x_read_fwinfo(struct bnx2x *bp)
 {
-	int cnt, i, block_end, rodi;
-	char vpd_start[BNX2X_VPD_LEN+1];
-	char str_id_reg[VENDOR_ID_LEN+1];
-	char str_id_cap[VENDOR_ID_LEN+1];
-	char *vpd_data;
-	char *vpd_extended_data = NULL;
-	u8 len;
-
-	cnt = pci_read_vpd(bp->pdev, 0, BNX2X_VPD_LEN, vpd_start);
-	memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
-
-	if (cnt < BNX2X_VPD_LEN)
-		goto out_not_found;
-
-	/* VPD RO tag should be first tag after identifier string, hence
-	 * we should be able to find it in first BNX2X_VPD_LEN chars
-	 */
-	i = pci_vpd_find_tag(vpd_start, BNX2X_VPD_LEN, PCI_VPD_LRDT_RO_DATA);
-	if (i < 0)
-		goto out_not_found;
-
-	block_end = i + PCI_VPD_LRDT_TAG_SIZE +
-		    pci_vpd_lrdt_size(&vpd_start[i]);
-
-	i += PCI_VPD_LRDT_TAG_SIZE;
-
-	if (block_end > BNX2X_VPD_LEN) {
-		vpd_extended_data = kmalloc(block_end, GFP_KERNEL);
-		if (vpd_extended_data  == NULL)
-			goto out_not_found;
-
-		/* read rest of vpd image into vpd_extended_data */
-		memcpy(vpd_extended_data, vpd_start, BNX2X_VPD_LEN);
-		cnt = pci_read_vpd(bp->pdev, BNX2X_VPD_LEN,
-				   block_end - BNX2X_VPD_LEN,
-				   vpd_extended_data + BNX2X_VPD_LEN);
-		if (cnt < (block_end - BNX2X_VPD_LEN))
-			goto out_not_found;
-		vpd_data = vpd_extended_data;
-	} else
-		vpd_data = vpd_start;
+	char str_id[VENDOR_ID_LEN + 1];
+	unsigned int vpd_len, kw_len;
+	u8 *vpd_data;
+	int rodi;
 
-	/* now vpd_data holds full vpd content in both cases */
-
-	rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
-				   PCI_VPD_RO_KEYWORD_MFR_ID);
-	if (rodi < 0)
-		goto out_not_found;
+	memset(bp->fw_ver, 0, sizeof(bp->fw_ver));
 
-	len = pci_vpd_info_field_size(&vpd_data[rodi]);
+	vpd_data = pci_vpd_alloc(bp->pdev, &vpd_len);
+	if (IS_ERR(vpd_data))
+		return;
 
-	if (len != VENDOR_ID_LEN)
+	rodi = pci_vpd_find_ro_info_keyword(vpd_data, vpd_len,
+					    PCI_VPD_RO_KEYWORD_MFR_ID, &kw_len);
+	if (rodi < 0 || kw_len != VENDOR_ID_LEN)
 		goto out_not_found;
 
-	rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
-
 	/* vendor specific info */
-	snprintf(str_id_reg, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
-	snprintf(str_id_cap, VENDOR_ID_LEN + 1, "%04X", PCI_VENDOR_ID_DELL);
-	if (!strncmp(str_id_reg, &vpd_data[rodi], VENDOR_ID_LEN) ||
-	    !strncmp(str_id_cap, &vpd_data[rodi], VENDOR_ID_LEN)) {
-
-		rodi = pci_vpd_find_info_keyword(vpd_data, i, block_end,
-						PCI_VPD_RO_KEYWORD_VENDOR0);
-		if (rodi >= 0) {
-			len = pci_vpd_info_field_size(&vpd_data[rodi]);
-
-			rodi += PCI_VPD_INFO_FLD_HDR_SIZE;
-
-			if (len < 32 && (len + rodi) <= BNX2X_VPD_LEN) {
-				memcpy(bp->fw_ver, &vpd_data[rodi], len);
-				bp->fw_ver[len] = ' ';
-			}
+	snprintf(str_id, VENDOR_ID_LEN + 1, "%04x", PCI_VENDOR_ID_DELL);
+	if (!strncasecmp(str_id, &vpd_data[rodi], VENDOR_ID_LEN)) {
+		rodi = pci_vpd_find_ro_info_keyword(vpd_data, vpd_len,
+						    PCI_VPD_RO_KEYWORD_VENDOR0,
+						    &kw_len);
+		if (rodi >= 0 && kw_len < sizeof(bp->fw_ver)) {
+			memcpy(bp->fw_ver, &vpd_data[rodi], kw_len);
+			bp->fw_ver[kw_len] = ' ';
 		}
-		kfree(vpd_extended_data);
-		return;
 	}
 out_not_found:
-	kfree(vpd_extended_data);
-	return;
+	kfree(vpd_data);
 }
 
 static void bnx2x_set_modes_bitmap(struct bnx2x *bp)
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.c b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
index 627f85ee3922..ea0c45d33814 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.c
@@ -305,13 +305,15 @@ static bool bnxt_vf_pciid(enum board_idx idx)
 	writel(DB_CP_FLAGS | RING_CMP(idx), (db)->doorbell)
 
 #define BNXT_DB_NQ_P5(db, idx)						\
-	writeq((db)->db_key64 | DBR_TYPE_NQ | RING_CMP(idx), (db)->doorbell)
+	bnxt_writeq(bp, (db)->db_key64 | DBR_TYPE_NQ | RING_CMP(idx),	\
+		    (db)->doorbell)
 
 #define BNXT_DB_CQ_ARM(db, idx)						\
 	writel(DB_CP_REARM_FLAGS | RING_CMP(idx), (db)->doorbell)
 
 #define BNXT_DB_NQ_ARM_P5(db, idx)					\
-	writeq((db)->db_key64 | DBR_TYPE_NQ_ARM | RING_CMP(idx), (db)->doorbell)
+	bnxt_writeq(bp, (db)->db_key64 | DBR_TYPE_NQ_ARM | RING_CMP(idx),\
+		    (db)->doorbell)
 
 static void bnxt_db_nq(struct bnxt *bp, struct bnxt_db_info *db, u32 idx)
 {
@@ -332,8 +334,8 @@ static void bnxt_db_nq_arm(struct bnxt *bp, struct bnxt_db_info *db, u32 idx)
 static void bnxt_db_cq(struct bnxt *bp, struct bnxt_db_info *db, u32 idx)
 {
 	if (bp->flags & BNXT_FLAG_CHIP_P5)
-		writeq(db->db_key64 | DBR_TYPE_CQ_ARMALL | RING_CMP(idx),
-		       db->doorbell);
+		bnxt_writeq(bp, db->db_key64 | DBR_TYPE_CQ_ARMALL |
+			    RING_CMP(idx), db->doorbell);
 	else
 		BNXT_DB_CQ(db, idx);
 }
@@ -2200,25 +2202,34 @@ static int bnxt_async_event_process(struct bnxt *bp,
 		if (!fw_health)
 			goto async_event_process_exit;
 
-		fw_health->enabled = EVENT_DATA1_RECOVERY_ENABLED(data1);
-		fw_health->master = EVENT_DATA1_RECOVERY_MASTER_FUNC(data1);
-		if (!fw_health->enabled) {
+		if (!EVENT_DATA1_RECOVERY_ENABLED(data1)) {
+			fw_health->enabled = false;
 			netif_info(bp, drv, bp->dev,
 				   "Error recovery info: error recovery[0]\n");
 			break;
 		}
+		fw_health->master = EVENT_DATA1_RECOVERY_MASTER_FUNC(data1);
 		fw_health->tmr_multiplier =
 			DIV_ROUND_UP(fw_health->polling_dsecs * HZ,
 				     bp->current_interval * 10);
 		fw_health->tmr_counter = fw_health->tmr_multiplier;
-		fw_health->last_fw_heartbeat =
-			bnxt_fw_health_readl(bp, BNXT_FW_HEARTBEAT_REG);
-		fw_health->last_fw_reset_cnt =
-			bnxt_fw_health_readl(bp, BNXT_FW_RESET_CNT_REG);
+		if (!fw_health->enabled) {
+			fw_health->last_fw_heartbeat =
+				bnxt_fw_health_readl(bp, BNXT_FW_HEARTBEAT_REG);
+			fw_health->last_fw_reset_cnt =
+				bnxt_fw_health_readl(bp, BNXT_FW_RESET_CNT_REG);
+		}
 		netif_info(bp, drv, bp->dev,
 			   "Error recovery info: error recovery[1], master[%d], reset count[%u], health status: 0x%x\n",
 			   fw_health->master, fw_health->last_fw_reset_cnt,
 			   bnxt_fw_health_readl(bp, BNXT_FW_HEALTH_REG));
+		if (!fw_health->enabled) {
+			/* Make sure tmr_counter is set and visible to
+			 * bnxt_health_check() before setting enabled to true.
+			 */
+			smp_wmb();
+			fw_health->enabled = true;
+		}
 		goto async_event_process_exit;
 	}
 	case ASYNC_EVENT_CMPL_EVENT_ID_DEBUG_NOTIFICATION:
@@ -2638,8 +2649,8 @@ static void __bnxt_poll_cqs_done(struct bnxt *bp, struct bnxt_napi *bnapi,
 
 		if (cpr2 && cpr2->had_work_done) {
 			db = &cpr2->cp_db;
-			writeq(db->db_key64 | dbr_type |
-			       RING_CMP(cpr2->cp_raw_cons), db->doorbell);
+			bnxt_writeq(bp, db->db_key64 | dbr_type |
+				    RING_CMP(cpr2->cp_raw_cons), db->doorbell);
 			cpr2->had_work_done = 0;
 		}
 	}
@@ -4639,6 +4650,13 @@ static int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, u8 tunnel_type)
 	struct hwrm_tunnel_dst_port_free_input *req;
 	int rc;
 
+	if (tunnel_type == TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN &&
+	    bp->vxlan_fw_dst_port_id == INVALID_HW_RING_ID)
+		return 0;
+	if (tunnel_type == TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE &&
+	    bp->nge_fw_dst_port_id == INVALID_HW_RING_ID)
+		return 0;
+
 	rc = hwrm_req_init(bp, req, HWRM_TUNNEL_DST_PORT_FREE);
 	if (rc)
 		return rc;
@@ -4648,10 +4666,12 @@ static int bnxt_hwrm_tunnel_dst_port_free(struct bnxt *bp, u8 tunnel_type)
 	switch (tunnel_type) {
 	case TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN:
 		req->tunnel_dst_port_id = cpu_to_le16(bp->vxlan_fw_dst_port_id);
+		bp->vxlan_port = 0;
 		bp->vxlan_fw_dst_port_id = INVALID_HW_RING_ID;
 		break;
 	case TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE:
 		req->tunnel_dst_port_id = cpu_to_le16(bp->nge_fw_dst_port_id);
+		bp->nge_port = 0;
 		bp->nge_fw_dst_port_id = INVALID_HW_RING_ID;
 		break;
 	default:
@@ -4689,10 +4709,12 @@ static int bnxt_hwrm_tunnel_dst_port_alloc(struct bnxt *bp, __be16 port,
 
 	switch (tunnel_type) {
 	case TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_VXLAN:
+		bp->vxlan_port = port;
 		bp->vxlan_fw_dst_port_id =
 			le16_to_cpu(resp->tunnel_dst_port_id);
 		break;
 	case TUNNEL_DST_PORT_ALLOC_REQ_TUNNEL_TYPE_GENEVE:
+		bp->nge_port = port;
 		bp->nge_fw_dst_port_id = le16_to_cpu(resp->tunnel_dst_port_id);
 		break;
 	default:
@@ -8221,12 +8243,10 @@ static int bnxt_hwrm_port_qstats_ext(struct bnxt *bp, u8 flags)
 
 static void bnxt_hwrm_free_tunnel_ports(struct bnxt *bp)
 {
-	if (bp->vxlan_fw_dst_port_id != INVALID_HW_RING_ID)
-		bnxt_hwrm_tunnel_dst_port_free(
-			bp, TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN);
-	if (bp->nge_fw_dst_port_id != INVALID_HW_RING_ID)
-		bnxt_hwrm_tunnel_dst_port_free(
-			bp, TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE);
+	bnxt_hwrm_tunnel_dst_port_free(bp,
+		TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN);
+	bnxt_hwrm_tunnel_dst_port_free(bp,
+		TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE);
 }
 
 static int bnxt_set_tpa(struct bnxt *bp, bool set_tpa)
@@ -11247,6 +11267,8 @@ static void bnxt_fw_health_check(struct bnxt *bp)
 	if (!fw_health->enabled || test_bit(BNXT_STATE_IN_FW_RESET, &bp->state))
 		return;
 
+	/* Make sure it is enabled before checking the tmr_counter. */
+	smp_rmb();
 	if (fw_health->tmr_counter) {
 		fw_health->tmr_counter--;
 		return;
@@ -12625,13 +12647,10 @@ static int bnxt_udp_tunnel_sync(struct net_device *netdev, unsigned int table)
 	unsigned int cmd;
 
 	udp_tunnel_nic_get_port(netdev, table, 0, &ti);
-	if (ti.type == UDP_TUNNEL_TYPE_VXLAN) {
-		bp->vxlan_port = ti.port;
+	if (ti.type == UDP_TUNNEL_TYPE_VXLAN)
 		cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_VXLAN;
-	} else {
-		bp->nge_port = ti.port;
+	else
 		cmd = TUNNEL_DST_PORT_FREE_REQ_TUNNEL_TYPE_GENEVE;
-	}
 
 	if (ti.port)
 		return bnxt_hwrm_tunnel_dst_port_alloc(bp, ti.port, cmd);
@@ -13081,66 +13100,35 @@ static int bnxt_init_mac_addr(struct bnxt *bp)
 	return rc;
 }
 
-#define BNXT_VPD_LEN	512
 static void bnxt_vpd_read_info(struct bnxt *bp)
 {
 	struct pci_dev *pdev = bp->pdev;
-	int i, len, pos, ro_size, size;
-	ssize_t vpd_size;
+	unsigned int vpd_size, kw_len;
+	int pos, size;
 	u8 *vpd_data;
 
-	vpd_data = kmalloc(BNXT_VPD_LEN, GFP_KERNEL);
-	if (!vpd_data)
+	vpd_data = pci_vpd_alloc(pdev, &vpd_size);
+	if (IS_ERR(vpd_data)) {
+		pci_warn(pdev, "Unable to read VPD\n");
 		return;
-
-	vpd_size = pci_read_vpd(pdev, 0, BNXT_VPD_LEN, vpd_data);
-	if (vpd_size <= 0) {
-		netdev_err(bp->dev, "Unable to read VPD\n");
-		goto exit;
-	}
-
-	i = pci_vpd_find_tag(vpd_data, vpd_size, PCI_VPD_LRDT_RO_DATA);
-	if (i < 0) {
-		netdev_err(bp->dev, "VPD READ-Only not found\n");
-		goto exit;
-	}
-
-	i = pci_vpd_find_tag(vpd_data, vpd_size, PCI_VPD_LRDT_RO_DATA);
-	if (i < 0) {
-		netdev_err(bp->dev, "VPD READ-Only not found\n");
-		goto exit;
 	}
 
-	ro_size = pci_vpd_lrdt_size(&vpd_data[i]);
-	i += PCI_VPD_LRDT_TAG_SIZE;
-	if (i + ro_size > vpd_size)
-		goto exit;
-
-	pos = pci_vpd_find_info_keyword(vpd_data, i, ro_size,
-					PCI_VPD_RO_KEYWORD_PARTNO);
+	pos = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					   PCI_VPD_RO_KEYWORD_PARTNO, &kw_len);
 	if (pos < 0)
 		goto read_sn;
 
-	len = pci_vpd_info_field_size(&vpd_data[pos]);
-	pos += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (len + pos > vpd_size)
-		goto read_sn;
-
-	size = min(len, BNXT_VPD_FLD_LEN - 1);
+	size = min_t(int, kw_len, BNXT_VPD_FLD_LEN - 1);
 	memcpy(bp->board_partno, &vpd_data[pos], size);
 
 read_sn:
-	pos = pci_vpd_find_info_keyword(vpd_data, i, ro_size,
-					PCI_VPD_RO_KEYWORD_SERIALNO);
+	pos = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					   PCI_VPD_RO_KEYWORD_SERIALNO,
+					   &kw_len);
 	if (pos < 0)
 		goto exit;
 
-	len = pci_vpd_info_field_size(&vpd_data[pos]);
-	pos += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (len + pos > vpd_size)
-		goto exit;
-
-	size = min(len, BNXT_VPD_FLD_LEN - 1);
+	size = min_t(int, kw_len, BNXT_VPD_FLD_LEN - 1);
 	memcpy(bp->board_serialno, &vpd_data[pos], size);
 exit:
 	kfree(vpd_data);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt.h b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
index a8212dcdad5f..ec046e7a2484 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt.h
@@ -28,6 +28,7 @@
 #include <net/dst_metadata.h>
 #include <net/xdp.h>
 #include <linux/dim.h>
+#include <linux/io-64-nonatomic-lo-hi.h>
 #ifdef CONFIG_TEE_BNXT_FW
 #include <linux/firmware/broadcom/tee_bnxt_fw.h>
 #endif
@@ -1981,7 +1982,7 @@ struct bnxt {
 	struct mutex		sriov_lock;
 #endif
 
-#ifndef writeq
+#if BITS_PER_LONG == 32
 	/* ensure atomic 64-bit doorbell writes on 32-bit systems. */
 	spinlock_t		db_lock;
 #endif
@@ -2110,24 +2111,36 @@ static inline u32 bnxt_tx_avail(struct bnxt *bp, struct bnxt_tx_ring_info *txr)
 		((txr->tx_prod - txr->tx_cons) & bp->tx_ring_mask);
 }
 
-#ifndef writeq
-#define writeq(val64, db)			\
-do {						\
-	spin_lock(&bp->db_lock);		\
-	writel((val64) & 0xffffffff, db);	\
-	writel((val64) >> 32, (db) + 4);	\
-	spin_unlock(&bp->db_lock);		\
-} while (0)
+static inline void bnxt_writeq(struct bnxt *bp, u64 val,
+			       volatile void __iomem *addr)
+{
+#if BITS_PER_LONG == 32
+	spin_lock(&bp->db_lock);
+	lo_hi_writeq(val, addr);
+	spin_unlock(&bp->db_lock);
+#else
+	writeq(val, addr);
+#endif
+}
 
-#define writeq_relaxed writeq
+static inline void bnxt_writeq_relaxed(struct bnxt *bp, u64 val,
+				       volatile void __iomem *addr)
+{
+#if BITS_PER_LONG == 32
+	spin_lock(&bp->db_lock);
+	lo_hi_writeq_relaxed(val, addr);
+	spin_unlock(&bp->db_lock);
+#else
+	writeq_relaxed(val, addr);
 #endif
+}
 
 /* For TX and RX ring doorbells with no ordering guarantee*/
 static inline void bnxt_db_write_relaxed(struct bnxt *bp,
 					 struct bnxt_db_info *db, u32 idx)
 {
 	if (bp->flags & BNXT_FLAG_CHIP_P5) {
-		writeq_relaxed(db->db_key64 | idx, db->doorbell);
+		bnxt_writeq_relaxed(bp, db->db_key64 | idx, db->doorbell);
 	} else {
 		u32 db_val = db->db_key32 | idx;
 
@@ -2142,7 +2155,7 @@ static inline void bnxt_db_write(struct bnxt *bp, struct bnxt_db_info *db,
 				 u32 idx)
 {
 	if (bp->flags & BNXT_FLAG_CHIP_P5) {
-		writeq(db->db_key64 | idx, db->doorbell);
+		bnxt_writeq(bp, db->db_key64 | idx, db->doorbell);
 	} else {
 		u32 db_val = db->db_key32 | idx;
 
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
index 1423cc617d93..9576547df4ab 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.c
@@ -352,13 +352,16 @@ static void bnxt_copy_from_nvm_data(union devlink_param_value *dst,
 		dst->vu8 = (u8)val32;
 }
 
-static int bnxt_hwrm_get_nvm_cfg_ver(struct bnxt *bp,
-				     union devlink_param_value *nvm_cfg_ver)
+static int bnxt_hwrm_get_nvm_cfg_ver(struct bnxt *bp, u32 *nvm_cfg_ver)
 {
 	struct hwrm_nvm_get_variable_input *req;
+	u16 bytes = BNXT_NVM_CFG_VER_BYTES;
+	u16 bits = BNXT_NVM_CFG_VER_BITS;
+	union devlink_param_value ver;
 	union bnxt_nvm_data *data;
 	dma_addr_t data_dma_addr;
-	int rc;
+	int rc, i = 2;
+	u16 dim = 1;
 
 	rc = hwrm_req_init(bp, req, HWRM_NVM_GET_VARIABLE);
 	if (rc)
@@ -370,16 +373,34 @@ static int bnxt_hwrm_get_nvm_cfg_ver(struct bnxt *bp,
 		goto exit;
 	}
 
+	/* earlier devices present as an array of raw bytes */
+	if (!BNXT_CHIP_P5(bp)) {
+		dim = 0;
+		i = 0;
+		bits *= 3;  /* array of 3 version components */
+		bytes *= 4; /* copy whole word */
+	}
+
 	hwrm_req_hold(bp, req);
 	req->dest_data_addr = cpu_to_le64(data_dma_addr);
-	req->data_len = cpu_to_le16(BNXT_NVM_CFG_VER_BITS);
+	req->data_len = cpu_to_le16(bits);
 	req->option_num = cpu_to_le16(NVM_OFF_NVM_CFG_VER);
+	req->dimensions = cpu_to_le16(dim);
 
-	rc = hwrm_req_send_silent(bp, req);
-	if (!rc)
-		bnxt_copy_from_nvm_data(nvm_cfg_ver, data,
-					BNXT_NVM_CFG_VER_BITS,
-					BNXT_NVM_CFG_VER_BYTES);
+	while (i >= 0) {
+		req->index_0 = cpu_to_le16(i--);
+		rc = hwrm_req_send_silent(bp, req);
+		if (rc)
+			goto exit;
+		bnxt_copy_from_nvm_data(&ver, data, bits, bytes);
+
+		if (BNXT_CHIP_P5(bp)) {
+			*nvm_cfg_ver <<= 8;
+			*nvm_cfg_ver |= ver.vu8;
+		} else {
+			*nvm_cfg_ver = ver.vu32;
+		}
+	}
 
 exit:
 	hwrm_req_drop(bp, req);
@@ -416,12 +437,12 @@ static int bnxt_dl_info_get(struct devlink *dl, struct devlink_info_req *req,
 {
 	struct hwrm_nvm_get_dev_info_output nvm_dev_info;
 	struct bnxt *bp = bnxt_get_bp_from_dl(dl);
-	union devlink_param_value nvm_cfg_ver;
 	struct hwrm_ver_get_output *ver_resp;
 	char mgmt_ver[FW_VER_STR_LEN];
 	char roce_ver[FW_VER_STR_LEN];
 	char ncsi_ver[FW_VER_STR_LEN];
 	char buf[32];
+	u32 ver = 0;
 	int rc;
 
 	rc = devlink_info_driver_name_put(req, DRV_MODULE_NAME);
@@ -456,7 +477,7 @@ static int bnxt_dl_info_get(struct devlink *dl, struct devlink_info_req *req,
 		return rc;
 
 	ver_resp = &bp->ver_resp;
-	sprintf(buf, "%X", ver_resp->chip_rev);
+	sprintf(buf, "%c%d", 'A' + ver_resp->chip_rev, ver_resp->chip_metal);
 	rc = bnxt_dl_info_put(bp, req, BNXT_VERSION_FIXED,
 			      DEVLINK_INFO_VERSION_GENERIC_ASIC_REV, buf);
 	if (rc)
@@ -475,11 +496,9 @@ static int bnxt_dl_info_get(struct devlink *dl, struct devlink_info_req *req,
 	if (rc)
 		return rc;
 
-	if (BNXT_PF(bp) && !bnxt_hwrm_get_nvm_cfg_ver(bp, &nvm_cfg_ver)) {
-		u32 ver = nvm_cfg_ver.vu32;
-
-		sprintf(buf, "%d.%d.%d", (ver >> 16) & 0xf, (ver >> 8) & 0xf,
-			ver & 0xf);
+	if (BNXT_PF(bp) && !bnxt_hwrm_get_nvm_cfg_ver(bp, &ver)) {
+		sprintf(buf, "%d.%d.%d", (ver >> 16) & 0xff, (ver >> 8) & 0xff,
+			ver & 0xff);
 		rc = bnxt_dl_info_put(bp, req, BNXT_VERSION_STORED,
 				      DEVLINK_INFO_VERSION_GENERIC_FW_PSID,
 				      buf);
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
index d22cab5d6856..d889f240da2b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_devlink.h
@@ -40,8 +40,8 @@ static inline void bnxt_link_bp_to_dl(struct bnxt *bp, struct devlink *dl)
 #define NVM_OFF_ENABLE_SRIOV		401
 #define NVM_OFF_NVM_CFG_VER		602
 
-#define BNXT_NVM_CFG_VER_BITS		24
-#define BNXT_NVM_CFG_VER_BYTES		4
+#define BNXT_NVM_CFG_VER_BITS		8
+#define BNXT_NVM_CFG_VER_BYTES		1
 
 #define BNXT_MSIX_VEC_MAX	512
 #define BNXT_MSIX_VEC_MIN_MAX	128
diff --git a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
index acef61abe35d..bb7327b82d0b 100644
--- a/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
+++ b/drivers/net/ethernet/broadcom/bnxt/bnxt_hwrm.c
@@ -145,11 +145,11 @@ void hwrm_req_timeout(struct bnxt *bp, void *req, unsigned int timeout)
  * @bp: The driver context.
  * @req: The request for which calls to hwrm_req_dma_slice() will have altered
  *	allocation flags.
- * @flags: A bitmask of GFP flags. These flags are passed to
- *	dma_alloc_coherent() whenever it is used to allocate backing memory
- *	for slices. Note that calls to hwrm_req_dma_slice() will not always
- *	result in new allocations, however, memory suballocated from the
- *	request buffer is already __GFP_ZERO.
+ * @gfp: A bitmask of GFP flags. These flags are passed to dma_alloc_coherent()
+ *	whenever it is used to allocate backing memory for slices. Note that
+ *	calls to hwrm_req_dma_slice() will not always result in new allocations,
+ *	however, memory suballocated from the request buffer is already
+ *	__GFP_ZERO.
  *
  * Sets the GFP allocation flags associated with the request for subsequent
  * calls to hwrm_req_dma_slice(). This can be useful for specifying __GFP_ZERO
@@ -698,8 +698,8 @@ int hwrm_req_send_silent(struct bnxt *bp, void *req)
  * @bp: The driver context.
  * @req: The request for which indirect data will be associated.
  * @size: The size of the allocation.
- * @dma: The bus address associated with the allocation. The HWRM API has no
- *	knowledge about the type of the request and so cannot infer how the
+ * @dma_handle: The bus address associated with the allocation. The HWRM API has
+ *	no knowledge about the type of the request and so cannot infer how the
  *	caller intends to use the indirect data. Thus, the caller is
  *	responsible for configuring the request object appropriately to
  *	point to the associated indirect memory. Note, DMA handle has the
diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c
index 8a238e349e02..5e0e0e70d801 100644
--- a/drivers/net/ethernet/broadcom/tg3.c
+++ b/drivers/net/ethernet/broadcom/tg3.c
@@ -12788,7 +12788,7 @@ static void tg3_get_ethtool_stats(struct net_device *dev,
 		memset(tmp_stats, 0, sizeof(struct tg3_ethtool_stats));
 }
 
-static __be32 *tg3_vpd_readblock(struct tg3 *tp, u32 *vpdlen)
+static __be32 *tg3_vpd_readblock(struct tg3 *tp, unsigned int *vpdlen)
 {
 	int i;
 	__be32 *buf;
@@ -12822,15 +12822,11 @@ static __be32 *tg3_vpd_readblock(struct tg3 *tp, u32 *vpdlen)
 			offset = TG3_NVM_VPD_OFF;
 			len = TG3_NVM_VPD_LEN;
 		}
-	} else {
-		len = TG3_NVM_PCI_VPD_MAX_LEN;
-	}
 
-	buf = kmalloc(len, GFP_KERNEL);
-	if (buf == NULL)
-		return NULL;
+		buf = kmalloc(len, GFP_KERNEL);
+		if (!buf)
+			return NULL;
 
-	if (magic == TG3_EEPROM_MAGIC) {
 		for (i = 0; i < len; i += 4) {
 			/* The data is in little-endian format in NVRAM.
 			 * Use the big-endian read routines to preserve
@@ -12841,12 +12837,9 @@ static __be32 *tg3_vpd_readblock(struct tg3 *tp, u32 *vpdlen)
 		}
 		*vpdlen = len;
 	} else {
-		ssize_t cnt;
-
-		cnt = pci_read_vpd(tp->pdev, 0, len, (u8 *)buf);
-		if (cnt < 0)
-			goto error;
-		*vpdlen = cnt;
+		buf = pci_vpd_alloc(tp->pdev, vpdlen);
+		if (IS_ERR(buf))
+			return NULL;
 	}
 
 	return buf;
@@ -12868,9 +12861,10 @@ error:
 
 static int tg3_test_nvram(struct tg3 *tp)
 {
-	u32 csum, magic, len;
+	u32 csum, magic;
 	__be32 *buf;
 	int i, j, k, err = 0, size;
+	unsigned int len;
 
 	if (tg3_flag(tp, NO_NVRAM))
 		return 0;
@@ -13013,33 +13007,10 @@ static int tg3_test_nvram(struct tg3 *tp)
 	if (!buf)
 		return -ENOMEM;
 
-	i = pci_vpd_find_tag((u8 *)buf, len, PCI_VPD_LRDT_RO_DATA);
-	if (i > 0) {
-		j = pci_vpd_lrdt_size(&((u8 *)buf)[i]);
-		if (j < 0)
-			goto out;
-
-		if (i + PCI_VPD_LRDT_TAG_SIZE + j > len)
-			goto out;
-
-		i += PCI_VPD_LRDT_TAG_SIZE;
-		j = pci_vpd_find_info_keyword((u8 *)buf, i, j,
-					      PCI_VPD_RO_KEYWORD_CHKSUM);
-		if (j > 0) {
-			u8 csum8 = 0;
-
-			j += PCI_VPD_INFO_FLD_HDR_SIZE;
-
-			for (i = 0; i <= j; i++)
-				csum8 += ((u8 *)buf)[i];
-
-			if (csum8)
-				goto out;
-		}
-	}
-
-	err = 0;
-
+	err = pci_vpd_check_csum(buf, len);
+	/* go on if no checksum found */
+	if (err == 1)
+		err = 0;
 out:
 	kfree(buf);
 	return err;
@@ -15624,64 +15595,36 @@ skip_phy_reset:
 static void tg3_read_vpd(struct tg3 *tp)
 {
 	u8 *vpd_data;
-	unsigned int block_end, rosize, len;
-	u32 vpdlen;
-	int j, i = 0;
+	unsigned int len, vpdlen;
+	int i;
 
 	vpd_data = (u8 *)tg3_vpd_readblock(tp, &vpdlen);
 	if (!vpd_data)
 		goto out_no_vpd;
 
-	i = pci_vpd_find_tag(vpd_data, vpdlen, PCI_VPD_LRDT_RO_DATA);
+	i = pci_vpd_find_ro_info_keyword(vpd_data, vpdlen,
+					 PCI_VPD_RO_KEYWORD_MFR_ID, &len);
 	if (i < 0)
-		goto out_not_found;
-
-	rosize = pci_vpd_lrdt_size(&vpd_data[i]);
-	block_end = i + PCI_VPD_LRDT_TAG_SIZE + rosize;
-	i += PCI_VPD_LRDT_TAG_SIZE;
+		goto partno;
 
-	if (block_end > vpdlen)
-		goto out_not_found;
-
-	j = pci_vpd_find_info_keyword(vpd_data, i, rosize,
-				      PCI_VPD_RO_KEYWORD_MFR_ID);
-	if (j > 0) {
-		len = pci_vpd_info_field_size(&vpd_data[j]);
-
-		j += PCI_VPD_INFO_FLD_HDR_SIZE;
-		if (j + len > block_end || len != 4 ||
-		    memcmp(&vpd_data[j], "1028", 4))
-			goto partno;
-
-		j = pci_vpd_find_info_keyword(vpd_data, i, rosize,
-					      PCI_VPD_RO_KEYWORD_VENDOR0);
-		if (j < 0)
-			goto partno;
+	if (len != 4 || memcmp(vpd_data + i, "1028", 4))
+		goto partno;
 
-		len = pci_vpd_info_field_size(&vpd_data[j]);
-
-		j += PCI_VPD_INFO_FLD_HDR_SIZE;
-		if (j + len > block_end)
-			goto partno;
+	i = pci_vpd_find_ro_info_keyword(vpd_data, vpdlen,
+					 PCI_VPD_RO_KEYWORD_VENDOR0, &len);
+	if (i < 0)
+		goto partno;
 
-		if (len >= sizeof(tp->fw_ver))
-			len = sizeof(tp->fw_ver) - 1;
-		memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
-		snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len,
-			 &vpd_data[j]);
-	}
+	memset(tp->fw_ver, 0, sizeof(tp->fw_ver));
+	snprintf(tp->fw_ver, sizeof(tp->fw_ver), "%.*s bc ", len, vpd_data + i);
 
 partno:
-	i = pci_vpd_find_info_keyword(vpd_data, i, rosize,
-				      PCI_VPD_RO_KEYWORD_PARTNO);
+	i = pci_vpd_find_ro_info_keyword(vpd_data, vpdlen,
+					 PCI_VPD_RO_KEYWORD_PARTNO, &len);
 	if (i < 0)
 		goto out_not_found;
 
-	len = pci_vpd_info_field_size(&vpd_data[i]);
-
-	i += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (len > TG3_BPN_SIZE ||
-	    (len + i) > vpdlen)
+	if (len > TG3_BPN_SIZE)
 		goto out_not_found;
 
 	memcpy(tp->board_part_number, &vpd_data[i], len);
diff --git a/drivers/net/ethernet/broadcom/tg3.h b/drivers/net/ethernet/broadcom/tg3.h
index 46ec4fdfd16a..1000c894064f 100644
--- a/drivers/net/ethernet/broadcom/tg3.h
+++ b/drivers/net/ethernet/broadcom/tg3.h
@@ -2101,7 +2101,6 @@
 /* Hardware Legacy NVRAM layout */
 #define TG3_NVM_VPD_OFF			0x100
 #define TG3_NVM_VPD_LEN			256
-#define TG3_NVM_PCI_VPD_MAX_LEN		512
 
 /* Hardware Selfboot NVRAM layout */
 #define TG3_NVM_HWSB_CFG1		0x00000004
diff --git a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
index c6fe0f2a4d0e..f6396ac64006 100644
--- a/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
+++ b/drivers/net/ethernet/cavium/liquidio/lio_vf_main.c
@@ -526,7 +526,7 @@ static void octeon_destroy_resources(struct octeon_device *oct)
 			oct->irq_name_storage = NULL;
 		}
 		/* Soft reset the octeon device before exiting */
-		if (oct->pci_dev->reset_fn)
+		if (!pcie_reset_flr(oct->pci_dev, PCI_RESET_PROBE))
 			octeon_pci_flr(oct);
 		else
 			cn23xx_vf_ask_pf_to_do_flr(oct);
diff --git a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
index 73c016166f06..d246eee4b6d5 100644
--- a/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
+++ b/drivers/net/ethernet/chelsio/cxgb/cxgb2.c
@@ -1111,6 +1111,7 @@ static int init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!adapter->registered_device_map) {
 		pr_err("%s: could not register any net devices\n",
 		       pci_name(pdev));
+		err = -EINVAL;
 		goto out_release_adapter_res;
 	}
 
diff --git a/drivers/net/ethernet/chelsio/cxgb3/sge.c b/drivers/net/ethernet/chelsio/cxgb3/sge.c
index e21a2e691382..c3afec1041f8 100644
--- a/drivers/net/ethernet/chelsio/cxgb3/sge.c
+++ b/drivers/net/ethernet/chelsio/cxgb3/sge.c
@@ -3301,6 +3301,9 @@ void t3_sge_stop(struct adapter *adap)
 
 	t3_sge_stop_dma(adap);
 
+	/* workqueues aren't initialized otherwise */
+	if (!(adap->flags & FULL_INIT_DONE))
+		return;
 	for (i = 0; i < SGE_QSETS; ++i) {
 		struct sge_qset *qs = &adap->sge.qs[i];
 
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
index 9058f09f921e..ecea3cdd30b3 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4.h
@@ -84,7 +84,6 @@ extern struct mutex uld_mutex;
 enum {
 	MAX_NPORTS	= 4,     /* max # of ports */
 	SERNUM_LEN	= 24,    /* Serial # length */
-	EC_LEN		= 16,    /* E/C length */
 	ID_LEN		= 16,    /* ID length */
 	PN_LEN		= 16,    /* Part Number length */
 	MACADDR_LEN	= 12,    /* MAC Address length */
@@ -391,7 +390,6 @@ struct tp_params {
 
 struct vpd_params {
 	unsigned int cclk;
-	u8 ec[EC_LEN + 1];
 	u8 sn[SERNUM_LEN + 1];
 	u8 id[ID_LEN + 1];
 	u8 pn[PN_LEN + 1];
diff --git a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
index 6606fb8b3e42..64144b6171d7 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/t4_hw.c
@@ -2743,10 +2743,9 @@ int t4_seeprom_wp(struct adapter *adapter, bool enable)
  */
 int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 {
-	int i, ret = 0, addr;
-	int ec, sn, pn, na;
-	u8 *vpd, csum, base_val = 0;
-	unsigned int vpdr_len, kw_offset, id_len;
+	unsigned int id_len, pn_len, sn_len, na_len;
+	int id, sn, pn, na, addr, ret = 0;
+	u8 *vpd, base_val = 0;
 
 	vpd = vmalloc(VPD_LEN);
 	if (!vpd)
@@ -2765,74 +2764,52 @@ int t4_get_raw_vpd_params(struct adapter *adapter, struct vpd_params *p)
 	if (ret < 0)
 		goto out;
 
-	if (vpd[0] != PCI_VPD_LRDT_ID_STRING) {
-		dev_err(adapter->pdev_dev, "missing VPD ID string\n");
-		ret = -EINVAL;
+	ret = pci_vpd_find_id_string(vpd, VPD_LEN, &id_len);
+	if (ret < 0)
 		goto out;
-	}
+	id = ret;
 
-	id_len = pci_vpd_lrdt_size(vpd);
-	if (id_len > ID_LEN)
-		id_len = ID_LEN;
-
-	i = pci_vpd_find_tag(vpd, VPD_LEN, PCI_VPD_LRDT_RO_DATA);
-	if (i < 0) {
-		dev_err(adapter->pdev_dev, "missing VPD-R section\n");
+	ret = pci_vpd_check_csum(vpd, VPD_LEN);
+	if (ret) {
+		dev_err(adapter->pdev_dev, "VPD checksum incorrect or missing\n");
 		ret = -EINVAL;
 		goto out;
 	}
 
-	vpdr_len = pci_vpd_lrdt_size(&vpd[i]);
-	kw_offset = i + PCI_VPD_LRDT_TAG_SIZE;
-	if (vpdr_len + kw_offset > VPD_LEN) {
-		dev_err(adapter->pdev_dev, "bad VPD-R length %u\n", vpdr_len);
-		ret = -EINVAL;
+	ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
+					   PCI_VPD_RO_KEYWORD_SERIALNO, &sn_len);
+	if (ret < 0)
 		goto out;
-	}
-
-#define FIND_VPD_KW(var, name) do { \
-	var = pci_vpd_find_info_keyword(vpd, kw_offset, vpdr_len, name); \
-	if (var < 0) { \
-		dev_err(adapter->pdev_dev, "missing VPD keyword " name "\n"); \
-		ret = -EINVAL; \
-		goto out; \
-	} \
-	var += PCI_VPD_INFO_FLD_HDR_SIZE; \
-} while (0)
-
-	FIND_VPD_KW(i, "RV");
-	for (csum = 0; i >= 0; i--)
-		csum += vpd[i];
+	sn = ret;
 
-	if (csum) {
-		dev_err(adapter->pdev_dev,
-			"corrupted VPD EEPROM, actual csum %u\n", csum);
-		ret = -EINVAL;
+	ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN,
+					   PCI_VPD_RO_KEYWORD_PARTNO, &pn_len);
+	if (ret < 0)
 		goto out;
-	}
+	pn = ret;
 
-	FIND_VPD_KW(ec, "EC");
-	FIND_VPD_KW(sn, "SN");
-	FIND_VPD_KW(pn, "PN");
-	FIND_VPD_KW(na, "NA");
-#undef FIND_VPD_KW
+	ret = pci_vpd_find_ro_info_keyword(vpd, VPD_LEN, "NA", &na_len);
+	if (ret < 0)
+		goto out;
+	na = ret;
 
-	memcpy(p->id, vpd + PCI_VPD_LRDT_TAG_SIZE, id_len);
+	memcpy(p->id, vpd + id, min_t(int, id_len, ID_LEN));
 	strim(p->id);
-	memcpy(p->ec, vpd + ec, EC_LEN);
-	strim(p->ec);
-	i = pci_vpd_info_field_size(vpd + sn - PCI_VPD_INFO_FLD_HDR_SIZE);
-	memcpy(p->sn, vpd + sn, min(i, SERNUM_LEN));
+	memcpy(p->sn, vpd + sn, min_t(int, sn_len, SERNUM_LEN));
 	strim(p->sn);
-	i = pci_vpd_info_field_size(vpd + pn - PCI_VPD_INFO_FLD_HDR_SIZE);
-	memcpy(p->pn, vpd + pn, min(i, PN_LEN));
+	memcpy(p->pn, vpd + pn, min_t(int, pn_len, PN_LEN));
 	strim(p->pn);
-	memcpy(p->na, vpd + na, min(i, MACADDR_LEN));
+	memcpy(p->na, vpd + na, min_t(int, na_len, MACADDR_LEN));
 	strim((char *)p->na);
 
 out:
 	vfree(vpd);
-	return ret < 0 ? ret : 0;
+	if (ret < 0) {
+		dev_err(adapter->pdev_dev, "error reading VPD\n");
+		return ret;
+	}
+
+	return 0;
 }
 
 /**
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
index dac1764ba740..5bdf731d9503 100644
--- a/drivers/net/ethernet/cirrus/Kconfig
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -38,7 +38,7 @@ config CS89x0_ISA
 
 config CS89x0_PLATFORM
 	tristate "CS89x0 platform driver support"
-	depends on ARM || COMPILE_TEST
+	depends on ARM || (COMPILE_TEST && !PPC)
 	select CS89x0
 	help
 	  Say Y to compile the cs89x0 platform driver. This makes this driver
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
index 474c6d1664e7..ac9b69513332 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_cmd.c
@@ -362,7 +362,7 @@ static void hclge_set_default_capability(struct hclge_dev *hdev)
 	}
 }
 
-const struct hclge_caps_bit_map hclge_cmd_caps_bit_map0[] = {
+static const struct hclge_caps_bit_map hclge_cmd_caps_bit_map0[] = {
 	{HCLGE_CAP_UDP_GSO_B, HNAE3_DEV_SUPPORT_UDP_GSO_B},
 	{HCLGE_CAP_PTP_B, HNAE3_DEV_SUPPORT_PTP_B},
 	{HCLGE_CAP_INT_QL_B, HNAE3_DEV_SUPPORT_INT_QL_B},
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
index 59772b0e9531..f89bfb352adf 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3vf/hclgevf_cmd.c
@@ -342,7 +342,7 @@ static void hclgevf_set_default_capability(struct hclgevf_dev *hdev)
 	set_bit(HNAE3_DEV_SUPPORT_FEC_B, ae_dev->caps);
 }
 
-const struct hclgevf_caps_bit_map hclgevf_cmd_caps_bit_map0[] = {
+static const struct hclgevf_caps_bit_map hclgevf_cmd_caps_bit_map0[] = {
 	{HCLGEVF_CAP_UDP_GSO_B, HNAE3_DEV_SUPPORT_UDP_GSO_B},
 	{HCLGEVF_CAP_INT_QL_B, HNAE3_DEV_SUPPORT_INT_QL_B},
 	{HCLGEVF_CAP_TQP_TXRX_INDEP_B, HNAE3_DEV_SUPPORT_TQP_TXRX_INDEP_B},
diff --git a/drivers/net/ethernet/i825xx/sun3_82586.c b/drivers/net/ethernet/i825xx/sun3_82586.c
index 893e0ddcb611..0696f723228a 100644
--- a/drivers/net/ethernet/i825xx/sun3_82586.c
+++ b/drivers/net/ethernet/i825xx/sun3_82586.c
@@ -314,7 +314,7 @@ static int __init sun3_82586_probe(void)
 	err = register_netdev(dev);
 	if (err)
 		goto out2;
-	return dev;
+	return 0;
 
 out2:
 	release_region(ioaddr, SUN3_82586_TOTAL_SIZE);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
index 7f3d01059e19..34a089b71e55 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/cgx.c
@@ -1487,7 +1487,7 @@ static int cgx_lmac_init(struct cgx *cgx)
 				MAX_DMAC_ENTRIES_PER_CGX / cgx->lmac_count;
 		err = rvu_alloc_bitmap(&lmac->mac_to_index_bmap);
 		if (err)
-			return err;
+			goto err_name_free;
 
 		/* Reserve first entry for default MAC address */
 		set_bit(0, lmac->mac_to_index_bmap.bmap);
@@ -1497,7 +1497,7 @@ static int cgx_lmac_init(struct cgx *cgx)
 		spin_lock_init(&lmac->event_cb_lock);
 		err = cgx_configure_interrupt(cgx, lmac, lmac->lmac_id, false);
 		if (err)
-			goto err_irq;
+			goto err_bitmap_free;
 
 		/* Add reference */
 		cgx->lmac_idmap[lmac->lmac_id] = lmac;
@@ -1507,7 +1507,9 @@ static int cgx_lmac_init(struct cgx *cgx)
 
 	return cgx_lmac_verify_fwi_version(cgx);
 
-err_irq:
+err_bitmap_free:
+	rvu_free_bitmap(&lmac->mac_to_index_bmap);
+err_name_free:
 	kfree(lmac->name);
 err_lmac_free:
 	kfree(lmac);
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
index ce647e037f4d..35836903b7fb 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.c
@@ -92,7 +92,8 @@ static void rvu_setup_hw_capabilities(struct rvu *rvu)
  */
 int rvu_poll_reg(struct rvu *rvu, u64 block, u64 offset, u64 mask, bool zero)
 {
-	unsigned long timeout = jiffies + usecs_to_jiffies(10000);
+	unsigned long timeout = jiffies + usecs_to_jiffies(20000);
+	bool twice = false;
 	void __iomem *reg;
 	u64 reg_val;
 
@@ -107,6 +108,15 @@ again:
 		usleep_range(1, 5);
 		goto again;
 	}
+	/* In scenarios where CPU is scheduled out before checking
+	 * 'time_before' (above) and gets scheduled in such that
+	 * jiffies are beyond timeout value, then check again if HW is
+	 * done with the operation in the meantime.
+	 */
+	if (!twice) {
+		twice = true;
+		goto again;
+	}
 	return -EBUSY;
 }
 
@@ -201,6 +211,11 @@ int rvu_alloc_bitmap(struct rsrc_bmap *rsrc)
 	return 0;
 }
 
+void rvu_free_bitmap(struct rsrc_bmap *rsrc)
+{
+	kfree(rsrc->bmap);
+}
+
 /* Get block LF's HW index from a PF_FUNC's block slot number */
 int rvu_get_lf(struct rvu *rvu, struct rvu_block *block, u16 pcifunc, u16 slot)
 {
diff --git a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
index d38e5c980c30..1d9411232f1d 100644
--- a/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
+++ b/drivers/net/ethernet/marvell/octeontx2/af/rvu.h
@@ -638,6 +638,7 @@ static inline bool is_rvu_fwdata_valid(struct rvu *rvu)
 }
 
 int rvu_alloc_bitmap(struct rsrc_bmap *rsrc);
+void rvu_free_bitmap(struct rsrc_bmap *rsrc);
 int rvu_alloc_rsrc(struct rsrc_bmap *rsrc);
 void rvu_free_rsrc(struct rsrc_bmap *rsrc, int id);
 bool is_rsrc_free(struct rsrc_bmap *rsrc, int id);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
index 3cc76f14d2fd..95f21dfdba48 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/cn10k.c
@@ -27,7 +27,8 @@ int cn10k_lmtst_init(struct otx2_nic *pfvf)
 {
 
 	struct lmtst_tbl_setup_req *req;
-	int qcount, err;
+	struct otx2_lmt_info *lmt_info;
+	int err, cpu;
 
 	if (!test_bit(CN10K_LMTST, &pfvf->hw.cap_flag)) {
 		pfvf->hw_ops = &otx2_hw_ops;
@@ -35,15 +36,9 @@ int cn10k_lmtst_init(struct otx2_nic *pfvf)
 	}
 
 	pfvf->hw_ops = &cn10k_hw_ops;
-	qcount = pfvf->hw.max_queues;
-	/* LMTST lines allocation
-	 * qcount = num_online_cpus();
-	 * NPA = TX + RX + XDP.
-	 * NIX = TX * 32 (For Burst SQE flush).
-	 */
-	pfvf->tot_lmt_lines = (qcount * 3) + (qcount * 32);
-	pfvf->npa_lmt_lines = qcount * 3;
-	pfvf->nix_lmt_size =  LMT_BURST_SIZE * LMT_LINE_SIZE;
+	/* Total LMTLINES = num_online_cpus() * 32 (For Burst flush).*/
+	pfvf->tot_lmt_lines = (num_online_cpus() * LMT_BURST_SIZE);
+	pfvf->hw.lmt_info = alloc_percpu(struct otx2_lmt_info);
 
 	mutex_lock(&pfvf->mbox.lock);
 	req = otx2_mbox_alloc_msg_lmtst_tbl_setup(&pfvf->mbox);
@@ -66,6 +61,13 @@ int cn10k_lmtst_init(struct otx2_nic *pfvf)
 	err = otx2_sync_mbox_msg(&pfvf->mbox);
 	mutex_unlock(&pfvf->mbox.lock);
 
+	for_each_possible_cpu(cpu) {
+		lmt_info = per_cpu_ptr(pfvf->hw.lmt_info, cpu);
+		lmt_info->lmt_addr = ((u64)pfvf->hw.lmt_base +
+				      (cpu * LMT_BURST_SIZE * LMT_LINE_SIZE));
+		lmt_info->lmt_id = cpu * LMT_BURST_SIZE;
+	}
+
 	return 0;
 }
 EXPORT_SYMBOL(cn10k_lmtst_init);
@@ -74,13 +76,6 @@ int cn10k_sq_aq_init(void *dev, u16 qidx, u16 sqb_aura)
 {
 	struct nix_cn10k_aq_enq_req *aq;
 	struct otx2_nic *pfvf = dev;
-	struct otx2_snd_queue *sq;
-
-	sq = &pfvf->qset.sq[qidx];
-	sq->lmt_addr = (u64 *)((u64)pfvf->hw.nix_lmt_base +
-			       (qidx * pfvf->nix_lmt_size));
-
-	sq->lmt_id = pfvf->npa_lmt_lines + (qidx * LMT_BURST_SIZE);
 
 	/* Get memory to put this msg */
 	aq = otx2_mbox_alloc_msg_nix_cn10k_aq_enq(&pfvf->mbox);
@@ -125,8 +120,7 @@ void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq)
 		if (otx2_alloc_buffer(pfvf, cq, &bufptr)) {
 			if (num_ptrs--)
 				__cn10k_aura_freeptr(pfvf, cq->cq_idx, ptrs,
-						     num_ptrs,
-						     cq->rbpool->lmt_addr);
+						     num_ptrs);
 			break;
 		}
 		cq->pool_ptrs--;
@@ -134,8 +128,7 @@ void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq)
 		num_ptrs++;
 		if (num_ptrs == NPA_MAX_BURST || cq->pool_ptrs == 0) {
 			__cn10k_aura_freeptr(pfvf, cq->cq_idx, ptrs,
-					     num_ptrs,
-					     cq->rbpool->lmt_addr);
+					     num_ptrs);
 			num_ptrs = 1;
 		}
 	}
@@ -143,20 +136,23 @@ void cn10k_refill_pool_ptrs(void *dev, struct otx2_cq_queue *cq)
 
 void cn10k_sqe_flush(void *dev, struct otx2_snd_queue *sq, int size, int qidx)
 {
+	struct otx2_lmt_info *lmt_info;
+	struct otx2_nic *pfvf = dev;
 	u64 val = 0, tar_addr = 0;
 
+	lmt_info = per_cpu_ptr(pfvf->hw.lmt_info, smp_processor_id());
 	/* FIXME: val[0:10] LMT_ID.
 	 * [12:15] no of LMTST - 1 in the burst.
 	 * [19:63] data size of each LMTST in the burst except first.
 	 */
-	val = (sq->lmt_id & 0x7FF);
+	val = (lmt_info->lmt_id & 0x7FF);
 	/* Target address for LMTST flush tells HW how many 128bit
 	 * words are present.
 	 * tar_addr[6:4] size of first LMTST - 1 in units of 128b.
 	 */
 	tar_addr |= sq->io_addr | (((size / 16) - 1) & 0x7) << 4;
 	dma_wmb();
-	memcpy(sq->lmt_addr, sq->sqe_base, size);
+	memcpy((u64 *)lmt_info->lmt_addr, sq->sqe_base, size);
 	cn10k_lmt_flush(val, tar_addr);
 
 	sq->head++;
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
index ce25c2744435..78df173e6df2 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
@@ -1230,11 +1230,6 @@ static int otx2_pool_init(struct otx2_nic *pfvf, u16 pool_id,
 
 	pool->rbsize = buf_size;
 
-	/* Set LMTST addr for NPA batch free */
-	if (test_bit(CN10K_LMTST, &pfvf->hw.cap_flag))
-		pool->lmt_addr = (__force u64 *)((u64)pfvf->hw.npa_lmt_base +
-						 (pool_id * LMT_LINE_SIZE));
-
 	/* Initialize this pool's context via AF */
 	aq = otx2_mbox_alloc_msg_npa_aq_enq(&pfvf->mbox);
 	if (!aq) {
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
index 48227cec06ee..a51ecd771d07 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
@@ -53,6 +53,10 @@ enum arua_mapped_qtypes {
 /* Send skid of 2000 packets required for CQ size of 4K CQEs. */
 #define SEND_CQ_SKID	2000
 
+struct otx2_lmt_info {
+	u64 lmt_addr;
+	u16 lmt_id;
+};
 /* RSS configuration */
 struct otx2_rss_ctx {
 	u8  ind_tbl[MAX_RSS_INDIR_TBL_SIZE];
@@ -224,8 +228,7 @@ struct otx2_hw {
 #define LMT_LINE_SIZE		128
 #define LMT_BURST_SIZE		32 /* 32 LMTST lines for burst SQE flush */
 	u64			*lmt_base;
-	u64			*npa_lmt_base;
-	u64			*nix_lmt_base;
+	struct otx2_lmt_info	__percpu *lmt_info;
 };
 
 enum vfperm {
@@ -407,17 +410,18 @@ static inline bool is_96xx_B0(struct pci_dev *pdev)
  */
 #define PCI_REVISION_ID_96XX		0x00
 #define PCI_REVISION_ID_95XX		0x10
-#define PCI_REVISION_ID_LOKI		0x20
+#define PCI_REVISION_ID_95XXN		0x20
 #define PCI_REVISION_ID_98XX		0x30
 #define PCI_REVISION_ID_95XXMM		0x40
+#define PCI_REVISION_ID_95XXO		0xE0
 
 static inline bool is_dev_otx2(struct pci_dev *pdev)
 {
 	u8 midr = pdev->revision & 0xF0;
 
 	return (midr == PCI_REVISION_ID_96XX || midr == PCI_REVISION_ID_95XX ||
-		midr == PCI_REVISION_ID_LOKI || midr == PCI_REVISION_ID_98XX ||
-		midr == PCI_REVISION_ID_95XXMM);
+		midr == PCI_REVISION_ID_95XXN || midr == PCI_REVISION_ID_98XX ||
+		midr == PCI_REVISION_ID_95XXMM || midr == PCI_REVISION_ID_95XXO);
 }
 
 static inline void otx2_setup_dev_hw_settings(struct otx2_nic *pfvf)
@@ -562,15 +566,16 @@ static inline u64 otx2_atomic64_add(u64 incr, u64 *ptr)
 #endif
 
 static inline void __cn10k_aura_freeptr(struct otx2_nic *pfvf, u64 aura,
-					u64 *ptrs, u64 num_ptrs,
-					u64 *lmt_addr)
+					u64 *ptrs, u64 num_ptrs)
 {
+	struct otx2_lmt_info *lmt_info;
 	u64 size = 0, count_eot = 0;
 	u64 tar_addr, val = 0;
 
+	lmt_info = per_cpu_ptr(pfvf->hw.lmt_info, smp_processor_id());
 	tar_addr = (__force u64)otx2_get_regaddr(pfvf, NPA_LF_AURA_BATCH_FREE0);
 	/* LMTID is same as AURA Id */
-	val = (aura & 0x7FF) | BIT_ULL(63);
+	val = (lmt_info->lmt_id & 0x7FF) | BIT_ULL(63);
 	/* Set if [127:64] of last 128bit word has a valid pointer */
 	count_eot = (num_ptrs % 2) ? 0ULL : 1ULL;
 	/* Set AURA ID to free pointer */
@@ -586,7 +591,7 @@ static inline void __cn10k_aura_freeptr(struct otx2_nic *pfvf, u64 aura,
 			size++;
 		tar_addr |=  ((size - 1) & 0x7) << 4;
 	}
-	memcpy(lmt_addr, ptrs, sizeof(u64) * num_ptrs);
+	memcpy((u64 *)lmt_info->lmt_addr, ptrs, sizeof(u64) * num_ptrs);
 	/* Perform LMTST flush */
 	cn10k_lmt_flush(val, tar_addr);
 }
@@ -594,12 +599,11 @@ static inline void __cn10k_aura_freeptr(struct otx2_nic *pfvf, u64 aura,
 static inline void cn10k_aura_freeptr(void *dev, int aura, u64 buf)
 {
 	struct otx2_nic *pfvf = dev;
-	struct otx2_pool *pool;
 	u64 ptrs[2];
 
-	pool = &pfvf->qset.pool[aura];
 	ptrs[1] = buf;
-	__cn10k_aura_freeptr(pfvf, aura, ptrs, 2, pool->lmt_addr);
+	/* Free only one buffer at time during init and teardown */
+	__cn10k_aura_freeptr(pfvf, aura, ptrs, 2);
 }
 
 /* Alloc pointer from pool/aura */
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
index 799486c72177..dbfa3bc39e34 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
@@ -16,8 +16,8 @@
 #include "otx2_common.h"
 #include "otx2_ptp.h"
 
-#define DRV_NAME	"octeontx2-nicpf"
-#define DRV_VF_NAME	"octeontx2-nicvf"
+#define DRV_NAME	"rvu-nicpf"
+#define DRV_VF_NAME	"rvu-nicvf"
 
 struct otx2_stat {
 	char name[ETH_GSTRING_LEN];
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
index 2f2e8a3d7924..53df7fff92c4 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
@@ -1533,14 +1533,6 @@ int otx2_open(struct net_device *netdev)
 	if (!qset->rq)
 		goto err_free_mem;
 
-	if (test_bit(CN10K_LMTST, &pf->hw.cap_flag)) {
-		/* Reserve LMT lines for NPA AURA batch free */
-		pf->hw.npa_lmt_base = pf->hw.lmt_base;
-		/* Reserve LMT lines for NIX TX */
-		pf->hw.nix_lmt_base = (u64 *)((u64)pf->hw.npa_lmt_base +
-				      (pf->npa_lmt_lines * LMT_LINE_SIZE));
-	}
-
 	err = otx2_init_hw_resources(pf);
 	if (err)
 		goto err_free_mem;
@@ -2668,6 +2660,8 @@ err_del_mcam_entries:
 err_ptp_destroy:
 	otx2_ptp_destroy(pf);
 err_detach_rsrc:
+	if (pf->hw.lmt_info)
+		free_percpu(pf->hw.lmt_info);
 	if (test_bit(CN10K_LMTST, &pf->hw.cap_flag))
 		qmem_free(pf->dev, pf->dync_lmt);
 	otx2_detach_resources(&pf->mbox);
@@ -2811,6 +2805,8 @@ static void otx2_remove(struct pci_dev *pdev)
 	otx2_mcam_flow_del(pf);
 	otx2_shutdown_tc(pf);
 	otx2_detach_resources(&pf->mbox);
+	if (pf->hw.lmt_info)
+		free_percpu(pf->hw.lmt_info);
 	if (test_bit(CN10K_LMTST, &pf->hw.cap_flag))
 		qmem_free(pf->dev, pf->dync_lmt);
 	otx2_disable_mbox_intr(pf);
diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
index 869de5f59e73..3ff1ad79c001 100644
--- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
+++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
@@ -80,7 +80,6 @@ struct otx2_snd_queue {
 	u16			num_sqbs;
 	u16			sqe_thresh;
 	u8			sqe_per_sqb;
-	u32			lmt_id;
 	u64			 io_addr;
 	u64			*aura_fc_addr;
 	u64			*lmt_addr;
@@ -111,7 +110,6 @@ struct otx2_cq_poll {
 struct otx2_pool {
 	struct qmem		*stack;
 	struct qmem		*fc_addr;
-	u64			*lmt_addr;
 	u16			rbsize;
 };
 
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
index e91b4874a57f..3de1a03839e2 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_ethtool.c
@@ -582,7 +582,10 @@ static int ionic_set_ringparam(struct net_device *netdev,
 
 	qparam.ntxq_descs = ring->tx_pending;
 	qparam.nrxq_descs = ring->rx_pending;
+
+	mutex_lock(&lif->queue_lock);
 	err = ionic_reconfigure_queues(lif, &qparam);
+	mutex_unlock(&lif->queue_lock);
 	if (err)
 		netdev_info(netdev, "Ring reconfiguration failed, changes canceled: %d\n", err);
 
@@ -679,7 +682,9 @@ static int ionic_set_channels(struct net_device *netdev,
 		return 0;
 	}
 
+	mutex_lock(&lif->queue_lock);
 	err = ionic_reconfigure_queues(lif, &qparam);
+	mutex_unlock(&lif->queue_lock);
 	if (err)
 		netdev_info(netdev, "Queue reconfiguration failed, changes canceled: %d\n", err);
 
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_lif.c b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
index 23c9e196a784..381966e8f557 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_lif.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_lif.c
@@ -1715,7 +1715,6 @@ static int ionic_set_mac_address(struct net_device *netdev, void *sa)
 static void ionic_stop_queues_reconfig(struct ionic_lif *lif)
 {
 	/* Stop and clean the queues before reconfiguration */
-	mutex_lock(&lif->queue_lock);
 	netif_device_detach(lif->netdev);
 	ionic_stop_queues(lif);
 	ionic_txrx_deinit(lif);
@@ -1734,8 +1733,7 @@ static int ionic_start_queues_reconfig(struct ionic_lif *lif)
 	 * DOWN and UP to try to reset and clear the issue.
 	 */
 	err = ionic_txrx_init(lif);
-	mutex_unlock(&lif->queue_lock);
-	ionic_link_status_check_request(lif, CAN_SLEEP);
+	ionic_link_status_check_request(lif, CAN_NOT_SLEEP);
 	netif_device_attach(lif->netdev);
 
 	return err;
@@ -1765,9 +1763,13 @@ static int ionic_change_mtu(struct net_device *netdev, int new_mtu)
 		return 0;
 	}
 
+	mutex_lock(&lif->queue_lock);
 	ionic_stop_queues_reconfig(lif);
 	netdev->mtu = new_mtu;
-	return ionic_start_queues_reconfig(lif);
+	err = ionic_start_queues_reconfig(lif);
+	mutex_unlock(&lif->queue_lock);
+
+	return err;
 }
 
 static void ionic_tx_timeout_work(struct work_struct *ws)
@@ -1783,8 +1785,10 @@ static void ionic_tx_timeout_work(struct work_struct *ws)
 	if (!netif_running(lif->netdev))
 		return;
 
+	mutex_lock(&lif->queue_lock);
 	ionic_stop_queues_reconfig(lif);
 	ionic_start_queues_reconfig(lif);
+	mutex_unlock(&lif->queue_lock);
 }
 
 static void ionic_tx_timeout(struct net_device *netdev, unsigned int txqueue)
diff --git a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
index 7e3a5634c161..25ecfcfa1281 100644
--- a/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
+++ b/drivers/net/ethernet/pensando/ionic/ionic_rx_filter.c
@@ -318,7 +318,7 @@ void ionic_rx_filter_sync(struct ionic_lif *lif)
 			if (f->state == IONIC_FILTER_STATE_NEW ||
 			    f->state == IONIC_FILTER_STATE_OLD) {
 				sync_item = devm_kzalloc(dev, sizeof(*sync_item),
-							 GFP_KERNEL);
+							 GFP_ATOMIC);
 				if (!sync_item)
 					goto loop_out;
 
diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
index 3d61a767a8a3..09f20c794754 100644
--- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
+++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_init.c
@@ -437,7 +437,6 @@ int qlcnic_pinit_from_rom(struct qlcnic_adapter *adapter)
 	QLCWR32(adapter, QLCNIC_CRB_PEG_NET_4 + 0x3c, 1);
 	msleep(20);
 
-	qlcnic_rom_unlock(adapter);
 	/* big hammer don't reset CAM block on reset */
 	QLCWR32(adapter, QLCNIC_ROMUSB_GLB_SW_RESET, 0xfeffffff);
 
diff --git a/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c b/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
index 79e50079ed03..f72e13b83869 100644
--- a/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
+++ b/drivers/net/ethernet/qualcomm/emac/emac-ethtool.c
@@ -100,7 +100,7 @@ static void emac_get_strings(struct net_device *netdev, u32 stringset, u8 *data)
 
 	case ETH_SS_STATS:
 		for (i = 0; i < EMAC_STATS_LEN; i++) {
-			strlcpy(data, emac_ethtool_stat_strings[i],
+			strscpy(data, emac_ethtool_stat_strings[i],
 				ETH_GSTRING_LEN);
 			data += ETH_GSTRING_LEN;
 		}
diff --git a/drivers/net/ethernet/renesas/sh_eth.c b/drivers/net/ethernet/renesas/sh_eth.c
index 6c8ba916d1a6..1374faa229a2 100644
--- a/drivers/net/ethernet/renesas/sh_eth.c
+++ b/drivers/net/ethernet/renesas/sh_eth.c
@@ -2533,6 +2533,7 @@ static netdev_tx_t sh_eth_start_xmit(struct sk_buff *skb,
 	else
 		txdesc->status |= cpu_to_le32(TD_TACT);
 
+	wmb(); /* cur_tx must be incremented after TACT bit was set */
 	mdp->cur_tx++;
 
 	if (!(sh_eth_read(ndev, EDTRR) & mdp->cd->edtrr_trns))
diff --git a/drivers/net/ethernet/sfc/efx.c b/drivers/net/ethernet/sfc/efx.c
index a295e2621cf3..43ef4f529028 100644
--- a/drivers/net/ethernet/sfc/efx.c
+++ b/drivers/net/ethernet/sfc/efx.c
@@ -900,74 +900,36 @@ static void efx_pci_remove(struct pci_dev *pci_dev)
 
 /* NIC VPD information
  * Called during probe to display the part number of the
- * installed NIC.  VPD is potentially very large but this should
- * always appear within the first 512 bytes.
+ * installed NIC.
  */
-#define SFC_VPD_LEN 512
 static void efx_probe_vpd_strings(struct efx_nic *efx)
 {
 	struct pci_dev *dev = efx->pci_dev;
-	char vpd_data[SFC_VPD_LEN];
-	ssize_t vpd_size;
-	int ro_start, ro_size, i, j;
-
-	/* Get the vpd data from the device */
-	vpd_size = pci_read_vpd(dev, 0, sizeof(vpd_data), vpd_data);
-	if (vpd_size <= 0) {
-		netif_err(efx, drv, efx->net_dev, "Unable to read VPD\n");
-		return;
-	}
-
-	/* Get the Read only section */
-	ro_start = pci_vpd_find_tag(vpd_data, vpd_size, PCI_VPD_LRDT_RO_DATA);
-	if (ro_start < 0) {
-		netif_err(efx, drv, efx->net_dev, "VPD Read-only not found\n");
-		return;
-	}
-
-	ro_size = pci_vpd_lrdt_size(&vpd_data[ro_start]);
-	j = ro_size;
-	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-	if (i + j > vpd_size)
-		j = vpd_size - i;
-
-	/* Get the Part number */
-	i = pci_vpd_find_info_keyword(vpd_data, i, j, "PN");
-	if (i < 0) {
-		netif_err(efx, drv, efx->net_dev, "Part number not found\n");
-		return;
-	}
+	unsigned int vpd_size, kw_len;
+	u8 *vpd_data;
+	int start;
 
-	j = pci_vpd_info_field_size(&vpd_data[i]);
-	i += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (i + j > vpd_size) {
-		netif_err(efx, drv, efx->net_dev, "Incomplete part number\n");
+	vpd_data = pci_vpd_alloc(dev, &vpd_size);
+	if (IS_ERR(vpd_data)) {
+		pci_warn(dev, "Unable to read VPD\n");
 		return;
 	}
 
-	netif_info(efx, drv, efx->net_dev,
-		   "Part Number : %.*s\n", j, &vpd_data[i]);
-
-	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-	j = ro_size;
-	i = pci_vpd_find_info_keyword(vpd_data, i, j, "SN");
-	if (i < 0) {
-		netif_err(efx, drv, efx->net_dev, "Serial number not found\n");
-		return;
-	}
-
-	j = pci_vpd_info_field_size(&vpd_data[i]);
-	i += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (i + j > vpd_size) {
-		netif_err(efx, drv, efx->net_dev, "Incomplete serial number\n");
-		return;
-	}
+	start = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					     PCI_VPD_RO_KEYWORD_PARTNO, &kw_len);
+	if (start < 0)
+		pci_err(dev, "Part number not found or incomplete\n");
+	else
+		pci_info(dev, "Part Number : %.*s\n", kw_len, vpd_data + start);
 
-	efx->vpd_sn = kmalloc(j + 1, GFP_KERNEL);
-	if (!efx->vpd_sn)
-		return;
+	start = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					     PCI_VPD_RO_KEYWORD_SERIALNO, &kw_len);
+	if (start < 0)
+		pci_err(dev, "Serial number not found or incomplete\n");
+	else
+		efx->vpd_sn = kmemdup_nul(vpd_data + start, kw_len, GFP_KERNEL);
 
-	snprintf(efx->vpd_sn, j + 1, "%s", &vpd_data[i]);
+	kfree(vpd_data);
 }
 
 
diff --git a/drivers/net/ethernet/sfc/falcon/efx.c b/drivers/net/ethernet/sfc/falcon/efx.c
index c177ea0f301e..423bdf81200f 100644
--- a/drivers/net/ethernet/sfc/falcon/efx.c
+++ b/drivers/net/ethernet/sfc/falcon/efx.c
@@ -2780,75 +2780,36 @@ static void ef4_pci_remove(struct pci_dev *pci_dev)
 };
 
 /* NIC VPD information
- * Called during probe to display the part number of the
- * installed NIC.  VPD is potentially very large but this should
- * always appear within the first 512 bytes.
+ * Called during probe to display the part number of the installed NIC.
  */
-#define SFC_VPD_LEN 512
 static void ef4_probe_vpd_strings(struct ef4_nic *efx)
 {
 	struct pci_dev *dev = efx->pci_dev;
-	char vpd_data[SFC_VPD_LEN];
-	ssize_t vpd_size;
-	int ro_start, ro_size, i, j;
-
-	/* Get the vpd data from the device */
-	vpd_size = pci_read_vpd(dev, 0, sizeof(vpd_data), vpd_data);
-	if (vpd_size <= 0) {
-		netif_err(efx, drv, efx->net_dev, "Unable to read VPD\n");
-		return;
-	}
-
-	/* Get the Read only section */
-	ro_start = pci_vpd_find_tag(vpd_data, vpd_size, PCI_VPD_LRDT_RO_DATA);
-	if (ro_start < 0) {
-		netif_err(efx, drv, efx->net_dev, "VPD Read-only not found\n");
-		return;
-	}
-
-	ro_size = pci_vpd_lrdt_size(&vpd_data[ro_start]);
-	j = ro_size;
-	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-	if (i + j > vpd_size)
-		j = vpd_size - i;
-
-	/* Get the Part number */
-	i = pci_vpd_find_info_keyword(vpd_data, i, j, "PN");
-	if (i < 0) {
-		netif_err(efx, drv, efx->net_dev, "Part number not found\n");
-		return;
-	}
+	unsigned int vpd_size, kw_len;
+	u8 *vpd_data;
+	int start;
 
-	j = pci_vpd_info_field_size(&vpd_data[i]);
-	i += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (i + j > vpd_size) {
-		netif_err(efx, drv, efx->net_dev, "Incomplete part number\n");
+	vpd_data = pci_vpd_alloc(dev, &vpd_size);
+	if (IS_ERR(vpd_data)) {
+		pci_warn(dev, "Unable to read VPD\n");
 		return;
 	}
 
-	netif_info(efx, drv, efx->net_dev,
-		   "Part Number : %.*s\n", j, &vpd_data[i]);
-
-	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-	j = ro_size;
-	i = pci_vpd_find_info_keyword(vpd_data, i, j, "SN");
-	if (i < 0) {
-		netif_err(efx, drv, efx->net_dev, "Serial number not found\n");
-		return;
-	}
-
-	j = pci_vpd_info_field_size(&vpd_data[i]);
-	i += PCI_VPD_INFO_FLD_HDR_SIZE;
-	if (i + j > vpd_size) {
-		netif_err(efx, drv, efx->net_dev, "Incomplete serial number\n");
-		return;
-	}
+	start = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					     PCI_VPD_RO_KEYWORD_PARTNO, &kw_len);
+	if (start < 0)
+		pci_warn(dev, "Part number not found or incomplete\n");
+	else
+		pci_info(dev, "Part Number : %.*s\n", kw_len, vpd_data + start);
 
-	efx->vpd_sn = kmalloc(j + 1, GFP_KERNEL);
-	if (!efx->vpd_sn)
-		return;
+	start = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+					     PCI_VPD_RO_KEYWORD_SERIALNO, &kw_len);
+	if (start < 0)
+		pci_warn(dev, "Serial number not found or incomplete\n");
+	else
+		efx->vpd_sn = kmemdup_nul(vpd_data + start, kw_len, GFP_KERNEL);
 
-	snprintf(efx->vpd_sn, j + 1, "%s", &vpd_data[i]);
+	kfree(vpd_data);
 }
 
 
diff --git a/drivers/net/ethernet/smsc/smc911x.c b/drivers/net/ethernet/smsc/smc911x.c
index 22cdbf12c823..b008b4e8a2a5 100644
--- a/drivers/net/ethernet/smsc/smc911x.c
+++ b/drivers/net/ethernet/smsc/smc911x.c
@@ -1550,7 +1550,7 @@ static int smc911x_ethtool_getregslen(struct net_device *dev)
 }
 
 static void smc911x_ethtool_getregs(struct net_device *dev,
-										 struct ethtool_regs* regs, void *buf)
+				    struct ethtool_regs *regs, void *buf)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	unsigned long flags;
@@ -1600,7 +1600,7 @@ static int smc911x_ethtool_wait_eeprom_ready(struct net_device *dev)
 }
 
 static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
-													int cmd, int addr)
+						   int cmd, int addr)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	int ret;
@@ -1614,7 +1614,7 @@ static inline int smc911x_ethtool_write_eeprom_cmd(struct net_device *dev,
 }
 
 static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
-													u8 *data)
+						   u8 *data)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	int ret;
@@ -1626,7 +1626,7 @@ static inline int smc911x_ethtool_read_eeprom_byte(struct net_device *dev,
 }
 
 static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
-													 u8 data)
+						    u8 data)
 {
 	struct smc911x_local *lp = netdev_priv(dev);
 	int ret;
@@ -1638,7 +1638,7 @@ static inline int smc911x_ethtool_write_eeprom_byte(struct net_device *dev,
 }
 
 static int smc911x_ethtool_geteeprom(struct net_device *dev,
-									  struct ethtool_eeprom *eeprom, u8 *data)
+				     struct ethtool_eeprom *eeprom, u8 *data)
 {
 	u8 eebuf[SMC911X_EEPROM_LEN];
 	int i, ret;
@@ -1654,7 +1654,7 @@ static int smc911x_ethtool_geteeprom(struct net_device *dev,
 }
 
 static int smc911x_ethtool_seteeprom(struct net_device *dev,
-									   struct ethtool_eeprom *eeprom, u8 *data)
+				     struct ethtool_eeprom *eeprom, u8 *data)
 {
 	int i, ret;
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 4c9a37dd0d3f..ecf759ee1c9f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -109,8 +109,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		plat->bus_id = pci_dev_id(pdev);
 
 	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0)
+	if (phy_mode < 0) {
 		dev_err(&pdev->dev, "phy_mode not found\n");
+		return phy_mode;
+	}
 
 	plat->phy_interface = phy_mode;
 	plat->interface = PHY_INTERFACE_MODE_GMII;
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index ed0cd3920171..ece02b35a6ce 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -5347,7 +5347,7 @@ static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
 	struct stmmac_channel *ch =
 		container_of(napi, struct stmmac_channel, rxtx_napi);
 	struct stmmac_priv *priv = ch->priv_data;
-	int rx_done, tx_done;
+	int rx_done, tx_done, rxtx_done;
 	u32 chan = ch->index;
 
 	priv->xstats.napi_poll++;
@@ -5357,14 +5357,16 @@ static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
 
 	rx_done = stmmac_rx_zc(priv, budget, chan);
 
+	rxtx_done = max(tx_done, rx_done);
+
 	/* If either TX or RX work is not complete, return budget
 	 * and keep pooling
 	 */
-	if (tx_done >= budget || rx_done >= budget)
+	if (rxtx_done >= budget)
 		return budget;
 
 	/* all work done, exit the polling mode */
-	if (napi_complete_done(napi, rx_done)) {
+	if (napi_complete_done(napi, rxtx_done)) {
 		unsigned long flags;
 
 		spin_lock_irqsave(&ch->lock, flags);
@@ -5375,7 +5377,7 @@ static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget)
 		spin_unlock_irqrestore(&ch->lock, flags);
 	}
 
-	return min(rx_done, budget - 1);
+	return min(rxtx_done, budget - 1);
 }
 
 /**
@@ -7121,8 +7123,6 @@ int stmmac_suspend(struct device *dev)
 	if (!ndev || !netif_running(ndev))
 		return 0;
 
-	phylink_mac_change(priv->phylink, false);
-
 	mutex_lock(&priv->lock);
 
 	netif_device_detach(ndev);
@@ -7148,14 +7148,6 @@ int stmmac_suspend(struct device *dev)
 		stmmac_pmt(priv, priv->hw, priv->wolopts);
 		priv->irq_wake = 1;
 	} else {
-		mutex_unlock(&priv->lock);
-		rtnl_lock();
-		if (device_may_wakeup(priv->device))
-			phylink_speed_down(priv->phylink, false);
-		phylink_stop(priv->phylink);
-		rtnl_unlock();
-		mutex_lock(&priv->lock);
-
 		stmmac_mac_set(priv, priv->ioaddr, false);
 		pinctrl_pm_select_sleep_state(priv->device);
 		/* Disable clock in case of PWM is off */
@@ -7169,6 +7161,16 @@ int stmmac_suspend(struct device *dev)
 
 	mutex_unlock(&priv->lock);
 
+	rtnl_lock();
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		phylink_suspend(priv->phylink, true);
+	} else {
+		if (device_may_wakeup(priv->device))
+			phylink_speed_down(priv->phylink, false);
+		phylink_suspend(priv->phylink, false);
+	}
+	rtnl_unlock();
+
 	if (priv->dma_cap.fpesel) {
 		/* Disable FPE */
 		stmmac_fpe_configure(priv, priv->ioaddr,
@@ -7259,13 +7261,15 @@ int stmmac_resume(struct device *dev)
 			return ret;
 	}
 
-	if (!device_may_wakeup(priv->device) || !priv->plat->pmt) {
-		rtnl_lock();
-		phylink_start(priv->phylink);
-		/* We may have called phylink_speed_down before */
-		phylink_speed_up(priv->phylink);
-		rtnl_unlock();
+	rtnl_lock();
+	if (device_may_wakeup(priv->device) && priv->plat->pmt) {
+		phylink_resume(priv->phylink);
+	} else {
+		phylink_resume(priv->phylink);
+		if (device_may_wakeup(priv->device))
+			phylink_speed_up(priv->phylink);
 	}
+	rtnl_unlock();
 
 	rtnl_lock();
 	mutex_lock(&priv->lock);
@@ -7286,8 +7290,6 @@ int stmmac_resume(struct device *dev)
 	mutex_unlock(&priv->lock);
 	rtnl_unlock();
 
-	phylink_mac_change(priv->phylink, true);
-
 	netif_device_attach(ndev);
 
 	return 0;
diff --git a/drivers/net/ethernet/xscale/ptp_ixp46x.c b/drivers/net/ethernet/xscale/ptp_ixp46x.c
index ecece21315c3..39234852e01b 100644
--- a/drivers/net/ethernet/xscale/ptp_ixp46x.c
+++ b/drivers/net/ethernet/xscale/ptp_ixp46x.c
@@ -16,7 +16,6 @@
 #include <linux/ptp_clock_kernel.h>
 #include <linux/platform_device.h>
 #include <linux/soc/ixp4xx/cpu.h>
-#include <linux/module.h>
 #include <mach/ixp4xx-regs.h>
 
 #include "ixp46x_ts.h"
diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 2cdf9f989dec..a1464b764d4d 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -33,6 +33,7 @@
 enum {
 	PHYLINK_DISABLE_STOPPED,
 	PHYLINK_DISABLE_LINK,
+	PHYLINK_DISABLE_MAC_WOL,
 };
 
 /**
@@ -1282,6 +1283,9 @@ EXPORT_SYMBOL_GPL(phylink_start);
  * network device driver's &struct net_device_ops ndo_stop() method.  The
  * network device's carrier state should not be changed prior to calling this
  * function.
+ *
+ * This will synchronously bring down the link if the link is not already
+ * down (in other words, it will trigger a mac_link_down() method call.)
  */
 void phylink_stop(struct phylink *pl)
 {
@@ -1302,6 +1306,84 @@ void phylink_stop(struct phylink *pl)
 EXPORT_SYMBOL_GPL(phylink_stop);
 
 /**
+ * phylink_suspend() - handle a network device suspend event
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ * @mac_wol: true if the MAC needs to receive packets for Wake-on-Lan
+ *
+ * Handle a network device suspend event. There are several cases:
+ * - If Wake-on-Lan is not active, we can bring down the link between
+ *   the MAC and PHY by calling phylink_stop().
+ * - If Wake-on-Lan is active, and being handled only by the PHY, we
+ *   can also bring down the link between the MAC and PHY.
+ * - If Wake-on-Lan is active, but being handled by the MAC, the MAC
+ *   still needs to receive packets, so we can not bring the link down.
+ */
+void phylink_suspend(struct phylink *pl, bool mac_wol)
+{
+	ASSERT_RTNL();
+
+	if (mac_wol && (!pl->netdev || pl->netdev->wol_enabled)) {
+		/* Wake-on-Lan enabled, MAC handling */
+		mutex_lock(&pl->state_mutex);
+
+		/* Stop the resolver bringing the link up */
+		__set_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state);
+
+		/* Disable the carrier, to prevent transmit timeouts,
+		 * but one would hope all packets have been sent. This
+		 * also means phylink_resolve() will do nothing.
+		 */
+		netif_carrier_off(pl->netdev);
+
+		/* We do not call mac_link_down() here as we want the
+		 * link to remain up to receive the WoL packets.
+		 */
+		mutex_unlock(&pl->state_mutex);
+	} else {
+		phylink_stop(pl);
+	}
+}
+EXPORT_SYMBOL_GPL(phylink_suspend);
+
+/**
+ * phylink_resume() - handle a network device resume event
+ * @pl: a pointer to a &struct phylink returned from phylink_create()
+ *
+ * Undo the effects of phylink_suspend(), returning the link to an
+ * operational state.
+ */
+void phylink_resume(struct phylink *pl)
+{
+	ASSERT_RTNL();
+
+	if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) {
+		/* Wake-on-Lan enabled, MAC handling */
+
+		/* Call mac_link_down() so we keep the overall state balanced.
+		 * Do this under the state_mutex lock for consistency. This
+		 * will cause a "Link Down" message to be printed during
+		 * resume, which is harmless - the true link state will be
+		 * printed when we run a resolve.
+		 */
+		mutex_lock(&pl->state_mutex);
+		phylink_link_down(pl);
+		mutex_unlock(&pl->state_mutex);
+
+		/* Re-apply the link parameters so that all the settings get
+		 * restored to the MAC.
+		 */
+		phylink_mac_initial_config(pl, true);
+
+		/* Re-enable and re-resolve the link parameters */
+		clear_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state);
+		phylink_run_resolve(pl);
+	} else {
+		phylink_start(pl);
+	}
+}
+EXPORT_SYMBOL_GPL(phylink_resume);
+
+/**
  * phylink_ethtool_get_wol() - get the wake on lan parameters for the PHY
  * @pl: a pointer to a &struct phylink returned from phylink_create()
  * @wol: a pointer to &struct ethtool_wolinfo to hold the read parameters
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 4c4ab7b38d78..82bb5ed94c48 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -654,6 +654,11 @@ static const struct usb_device_id mbim_devs[] = {
 	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
 	},
 
+	/* Telit LN920 */
+	{ USB_DEVICE_AND_INTERFACE_INFO(0x1bc7, 0x1061, USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
+	  .driver_info = (unsigned long)&cdc_mbim_info_avoid_altsetting_toggle,
+	},
+
 	/* default entry */
 	{ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_MBIM, USB_CDC_PROTO_NONE),
 	  .driver_info = (unsigned long)&cdc_mbim_info_zlp,
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 7dc1ef3f93c3..a57251ba5991 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -2535,13 +2535,17 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface,
 	if (!hso_net->mux_bulk_tx_buf)
 		goto err_free_tx_urb;
 
-	add_net_device(hso_dev);
+	result = add_net_device(hso_dev);
+	if (result) {
+		dev_err(&interface->dev, "Failed to add net device\n");
+		goto err_free_tx_buf;
+	}
 
 	/* registering our net device */
 	result = register_netdev(net);
 	if (result) {
 		dev_err(&interface->dev, "Failed to register device\n");
-		goto err_free_tx_buf;
+		goto err_rmv_ndev;
 	}
 
 	hso_log_port(hso_dev);
@@ -2550,8 +2554,9 @@ static struct hso_device *hso_create_net_device(struct usb_interface *interface,
 
 	return hso_dev;
 
-err_free_tx_buf:
+err_rmv_ndev:
 	remove_net_device(hso_dev);
+err_free_tx_buf:
 	kfree(hso_net->mux_bulk_tx_buf);
 err_free_tx_urb:
 	usb_free_urb(hso_net->mux_bulk_tx_urb);
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 6a2e4f884b12..33ada2c59952 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1354,6 +1354,7 @@ static const struct usb_device_id products[] = {
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1031, 3)}, /* Telit LE910C1-EUX */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1040, 2)},	/* Telit LE922A */
 	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1050, 2)},	/* Telit FN980 */
+	{QMI_QUIRK_SET_DTR(0x1bc7, 0x1060, 2)},	/* Telit LN920 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)},	/* Telit ME910 */
 	{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)},	/* Telit ME910 dual modem */
 	{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)},	/* Telit LE920 */
diff --git a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
index 52d1d391f4c6..d8231cc821ae 100644
--- a/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
+++ b/drivers/net/wireless/intel/iwlwifi/cfg/22000.c
@@ -9,7 +9,7 @@
 #include "iwl-prph.h"
 
 /* Highest firmware API version supported */
-#define IWL_22000_UCODE_API_MAX	65
+#define IWL_22000_UCODE_API_MAX	66
 
 /* Lowest firmware API version supported */
 #define IWL_22000_UCODE_API_MIN	39
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c b/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
index 314ed90c23dd..dde22bdc8703 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/pnvm.c
@@ -231,6 +231,7 @@ static int iwl_pnvm_get_from_fs(struct iwl_trans *trans, u8 **data, size_t *len)
 {
 	const struct firmware *pnvm;
 	char pnvm_name[MAX_PNVM_NAME];
+	size_t new_len;
 	int ret;
 
 	iwl_pnvm_get_fs_name(trans, pnvm_name, sizeof(pnvm_name));
@@ -242,11 +243,14 @@ static int iwl_pnvm_get_from_fs(struct iwl_trans *trans, u8 **data, size_t *len)
 		return ret;
 	}
 
+	new_len = pnvm->size;
 	*data = kmemdup(pnvm->data, pnvm->size, GFP_KERNEL);
+	release_firmware(pnvm);
+
 	if (!*data)
 		return -ENOMEM;
 
-	*len = pnvm->size;
+	*len = new_len;
 
 	return 0;
 }
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
index a7c79d814aa4..c875bf35533c 100644
--- a/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
+++ b/drivers/net/wireless/intel/iwlwifi/fw/uefi.c
@@ -49,14 +49,14 @@ void *iwl_uefi_get_pnvm(struct iwl_trans *trans, size_t *len)
 	err = efivar_entry_get(pnvm_efivar, NULL, &package_size, data);
 	if (err) {
 		IWL_DEBUG_FW(trans,
-			     "PNVM UEFI variable not found %d (len %zd)\n",
+			     "PNVM UEFI variable not found %d (len %lu)\n",
 			     err, package_size);
 		kfree(data);
 		data = ERR_PTR(err);
 		goto out;
 	}
 
-	IWL_DEBUG_FW(trans, "Read PNVM from UEFI with size %zd\n", package_size);
+	IWL_DEBUG_FW(trans, "Read PNVM from UEFI with size %lu\n", package_size);
 	*len = package_size;
 
 out:
diff --git a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
index 8dc1b8eecb86..61b2797a34a8 100644
--- a/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
+++ b/drivers/net/wireless/intel/iwlwifi/pcie/drv.c
@@ -558,6 +558,7 @@ static const struct iwl_dev_info iwl_dev_info_table[] = {
 	IWL_DEV_INFO(0xA0F0, 0x1652, killer1650i_2ax_cfg_qu_b0_hr_b0, NULL),
 	IWL_DEV_INFO(0xA0F0, 0x2074, iwl_ax201_cfg_qu_hr, NULL),
 	IWL_DEV_INFO(0xA0F0, 0x4070, iwl_ax201_cfg_qu_hr, NULL),
+	IWL_DEV_INFO(0xA0F0, 0x6074, iwl_ax201_cfg_qu_hr, NULL),
 	IWL_DEV_INFO(0x02F0, 0x0070, iwl_ax201_cfg_quz_hr, NULL),
 	IWL_DEV_INFO(0x02F0, 0x0074, iwl_ax201_cfg_quz_hr, NULL),
 	IWL_DEV_INFO(0x02F0, 0x6074, iwl_ax201_cfg_quz_hr, NULL),
diff --git a/drivers/net/wwan/iosm/iosm_ipc_mmio.c b/drivers/net/wwan/iosm/iosm_ipc_mmio.c
index 06c94b1720b6..09f94c123531 100644
--- a/drivers/net/wwan/iosm/iosm_ipc_mmio.c
+++ b/drivers/net/wwan/iosm/iosm_ipc_mmio.c
@@ -69,7 +69,7 @@ void ipc_mmio_update_cp_capability(struct iosm_mmio *ipc_mmio)
 	unsigned int ver;
 
 	ver = ipc_mmio_get_cp_version(ipc_mmio);
-	cp_cap = readl(ipc_mmio->base + ipc_mmio->offset.cp_capability);
+	cp_cap = ioread32(ipc_mmio->base + ipc_mmio->offset.cp_capability);
 
 	ipc_mmio->has_mux_lite = (ver >= IOSM_CP_VERSION) &&
 				 !(cp_cap & DL_AGGR) && !(cp_cap & UL_AGGR);
@@ -150,8 +150,8 @@ enum ipc_mem_exec_stage ipc_mmio_get_exec_stage(struct iosm_mmio *ipc_mmio)
 	if (!ipc_mmio)
 		return IPC_MEM_EXEC_STAGE_INVALID;
 
-	return (enum ipc_mem_exec_stage)readl(ipc_mmio->base +
-					      ipc_mmio->offset.exec_stage);
+	return (enum ipc_mem_exec_stage)ioread32(ipc_mmio->base +
+						 ipc_mmio->offset.exec_stage);
 }
 
 void ipc_mmio_copy_chip_info(struct iosm_mmio *ipc_mmio, void *dest,
@@ -167,8 +167,8 @@ enum ipc_mem_device_ipc_state ipc_mmio_get_ipc_state(struct iosm_mmio *ipc_mmio)
 	if (!ipc_mmio)
 		return IPC_MEM_DEVICE_IPC_INVALID;
 
-	return (enum ipc_mem_device_ipc_state)
-		readl(ipc_mmio->base + ipc_mmio->offset.ipc_status);
+	return (enum ipc_mem_device_ipc_state)ioread32(ipc_mmio->base +
+						       ipc_mmio->offset.ipc_status);
 }
 
 enum rom_exit_code ipc_mmio_get_rom_exit_code(struct iosm_mmio *ipc_mmio)
@@ -176,8 +176,8 @@ enum rom_exit_code ipc_mmio_get_rom_exit_code(struct iosm_mmio *ipc_mmio)
 	if (!ipc_mmio)
 		return IMEM_ROM_EXIT_FAIL;
 
-	return (enum rom_exit_code)readl(ipc_mmio->base +
-					 ipc_mmio->offset.rom_exit_code);
+	return (enum rom_exit_code)ioread32(ipc_mmio->base +
+					    ipc_mmio->offset.rom_exit_code);
 }
 
 void ipc_mmio_config(struct iosm_mmio *ipc_mmio)
@@ -188,10 +188,10 @@ void ipc_mmio_config(struct iosm_mmio *ipc_mmio)
 	/* AP memory window (full window is open and active so that modem checks
 	 * each AP address) 0 means don't check on modem side.
 	 */
-	iowrite64_lo_hi(0, ipc_mmio->base + ipc_mmio->offset.ap_win_base);
-	iowrite64_lo_hi(0, ipc_mmio->base + ipc_mmio->offset.ap_win_end);
+	iowrite64(0, ipc_mmio->base + ipc_mmio->offset.ap_win_base);
+	iowrite64(0, ipc_mmio->base + ipc_mmio->offset.ap_win_end);
 
-	iowrite64_lo_hi(ipc_mmio->context_info_addr,
+	iowrite64(ipc_mmio->context_info_addr,
 			ipc_mmio->base + ipc_mmio->offset.context_info);
 }
 
@@ -201,8 +201,8 @@ void ipc_mmio_set_psi_addr_and_size(struct iosm_mmio *ipc_mmio, dma_addr_t addr,
 	if (!ipc_mmio)
 		return;
 
-	iowrite64_lo_hi(addr, ipc_mmio->base + ipc_mmio->offset.psi_address);
-	writel(size, ipc_mmio->base + ipc_mmio->offset.psi_size);
+	iowrite64(addr, ipc_mmio->base + ipc_mmio->offset.psi_address);
+	iowrite32(size, ipc_mmio->base + ipc_mmio->offset.psi_size);
 }
 
 void ipc_mmio_set_contex_info_addr(struct iosm_mmio *ipc_mmio, phys_addr_t addr)
@@ -218,6 +218,8 @@ void ipc_mmio_set_contex_info_addr(struct iosm_mmio *ipc_mmio, phys_addr_t addr)
 
 int ipc_mmio_get_cp_version(struct iosm_mmio *ipc_mmio)
 {
-	return ipc_mmio ? readl(ipc_mmio->base + ipc_mmio->offset.cp_version) :
-			  -EFAULT;
+	if (ipc_mmio)
+		return ioread32(ipc_mmio->base + ipc_mmio->offset.cp_version);
+
+	return -EFAULT;
 }
diff --git a/drivers/ntb/hw/amd/ntb_hw_amd.c b/drivers/ntb/hw/amd/ntb_hw_amd.c
index 71428d8cbcfc..87847c380051 100644
--- a/drivers/ntb/hw/amd/ntb_hw_amd.c
+++ b/drivers/ntb/hw/amd/ntb_hw_amd.c
@@ -1176,22 +1176,14 @@ static int amd_ntb_init_pci(struct amd_ntb_dev *ndev,
 
 	pci_set_master(pdev);
 
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc) {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc)
 			goto err_dma_mask;
 		dev_warn(&pdev->dev, "Cannot DMA highmem\n");
 	}
 
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (rc) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc)
-			goto err_dma_mask;
-		dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
-	}
-
 	ndev->self_mmio = pci_iomap(pdev, 0, 0);
 	if (!ndev->self_mmio) {
 		rc = -EIO;
diff --git a/drivers/ntb/hw/idt/ntb_hw_idt.c b/drivers/ntb/hw/idt/ntb_hw_idt.c
index e7a4c2aa8baa..733557231ed0 100644
--- a/drivers/ntb/hw/idt/ntb_hw_idt.c
+++ b/drivers/ntb/hw/idt/ntb_hw_idt.c
@@ -2640,26 +2640,15 @@ static int idt_init_pci(struct idt_ntb_dev *ndev)
 	int ret;
 
 	/* Initialize the bit mask of PCI/NTB DMA */
-	ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (ret != 0) {
-		ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		ret = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 		if (ret != 0) {
 			dev_err(&pdev->dev, "Failed to set DMA bit mask\n");
 			return ret;
 		}
 		dev_warn(&pdev->dev, "Cannot set DMA highmem bit mask\n");
 	}
-	ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (ret != 0) {
-		ret = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (ret != 0) {
-			dev_err(&pdev->dev,
-				"Failed to set consistent DMA bit mask\n");
-			return ret;
-		}
-		dev_warn(&pdev->dev,
-			"Cannot set consistent DMA highmem bit mask\n");
-	}
 
 	/*
 	 * Enable the device advanced error reporting. It's not critical to
diff --git a/drivers/ntb/hw/intel/ntb_hw_gen1.c b/drivers/ntb/hw/intel/ntb_hw_gen1.c
index 093dd20057b9..e5f14e20a9ff 100644
--- a/drivers/ntb/hw/intel/ntb_hw_gen1.c
+++ b/drivers/ntb/hw/intel/ntb_hw_gen1.c
@@ -1771,22 +1771,14 @@ static int intel_ntb_init_pci(struct intel_ntb_dev *ndev, struct pci_dev *pdev)
 
 	pci_set_master(pdev);
 
-	rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc) {
-		rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+		rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
 		if (rc)
 			goto err_dma_mask;
 		dev_warn(&pdev->dev, "Cannot DMA highmem\n");
 	}
 
-	rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(64));
-	if (rc) {
-		rc = pci_set_consistent_dma_mask(pdev, DMA_BIT_MASK(32));
-		if (rc)
-			goto err_dma_mask;
-		dev_warn(&pdev->dev, "Cannot DMA consistent highmem\n");
-	}
-
 	ndev->self_mmio = pci_iomap(pdev, 0, 0);
 	if (!ndev->self_mmio) {
 		rc = -EIO;
diff --git a/drivers/ntb/hw/intel/ntb_hw_intel.h b/drivers/ntb/hw/intel/ntb_hw_intel.h
index 05e2335c9596..b233d1c6ba2d 100644
--- a/drivers/ntb/hw/intel/ntb_hw_intel.h
+++ b/drivers/ntb/hw/intel/ntb_hw_intel.h
@@ -43,9 +43,6 @@
  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  *
  * Intel PCIe NTB Linux driver
- *
- * Contact Information:
- * Jon Mason <jon.mason@intel.com>
  */
 
 #ifndef NTB_HW_INTEL_H
diff --git a/drivers/ntb/test/ntb_msi_test.c b/drivers/ntb/test/ntb_msi_test.c
index 7095ecd6223a..4e18e08776c9 100644
--- a/drivers/ntb/test/ntb_msi_test.c
+++ b/drivers/ntb/test/ntb_msi_test.c
@@ -369,8 +369,10 @@ static int ntb_msit_probe(struct ntb_client *client, struct ntb_dev *ntb)
 	if (ret)
 		goto remove_dbgfs;
 
-	if (!nm->isr_ctx)
+	if (!nm->isr_ctx) {
+		ret = -ENOMEM;
 		goto remove_dbgfs;
+	}
 
 	ntb_link_enable(ntb, NTB_SPEED_AUTO, NTB_WIDTH_AUTO);
 
diff --git a/drivers/ntb/test/ntb_perf.c b/drivers/ntb/test/ntb_perf.c
index 89df1350fefd..65e1e5cf1b29 100644
--- a/drivers/ntb/test/ntb_perf.c
+++ b/drivers/ntb/test/ntb_perf.c
@@ -598,6 +598,7 @@ static int perf_setup_inbuf(struct perf_peer *peer)
 		return -ENOMEM;
 	}
 	if (!IS_ALIGNED(peer->inbuf_xlat, xlat_align)) {
+		ret = -EINVAL;
 		dev_err(&perf->ntb->dev, "Unaligned inbuf allocated\n");
 		goto err_free_inbuf;
 	}
diff --git a/drivers/ntb/test/ntb_pingpong.c b/drivers/ntb/test/ntb_pingpong.c
index 2164e8492772..8aeca7914050 100644
--- a/drivers/ntb/test/ntb_pingpong.c
+++ b/drivers/ntb/test/ntb_pingpong.c
@@ -187,7 +187,7 @@ static void pp_ping(struct pp_ctx *pp)
 
 static void pp_pong(struct pp_ctx *pp)
 {
-	u32 msg_data = -1, spad_data = -1;
+	u32 msg_data, spad_data;
 	int pidx = 0;
 
 	/* Read pong data */
diff --git a/drivers/nvdimm/label.c b/drivers/nvdimm/label.c
index 9251441fd8a3..7f473f9db300 100644
--- a/drivers/nvdimm/label.c
+++ b/drivers/nvdimm/label.c
@@ -346,29 +346,45 @@ static bool preamble_next(struct nvdimm_drvdata *ndd,
 			free, nslot);
 }
 
+static bool nsl_validate_checksum(struct nvdimm_drvdata *ndd,
+				  struct nd_namespace_label *nd_label)
+{
+	u64 sum, sum_save;
+
+	if (!namespace_label_has(ndd, checksum))
+		return true;
+
+	sum_save = nsl_get_checksum(ndd, nd_label);
+	nsl_set_checksum(ndd, nd_label, 0);
+	sum = nd_fletcher64(nd_label, sizeof_namespace_label(ndd), 1);
+	nsl_set_checksum(ndd, nd_label, sum_save);
+	return sum == sum_save;
+}
+
+static void nsl_calculate_checksum(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label)
+{
+	u64 sum;
+
+	if (!namespace_label_has(ndd, checksum))
+		return;
+	nsl_set_checksum(ndd, nd_label, 0);
+	sum = nd_fletcher64(nd_label, sizeof_namespace_label(ndd), 1);
+	nsl_set_checksum(ndd, nd_label, sum);
+}
+
 static bool slot_valid(struct nvdimm_drvdata *ndd,
 		struct nd_namespace_label *nd_label, u32 slot)
 {
+	bool valid;
+
 	/* check that we are written where we expect to be written */
-	if (slot != __le32_to_cpu(nd_label->slot))
+	if (slot != nsl_get_slot(ndd, nd_label))
 		return false;
-
-	/* check checksum */
-	if (namespace_label_has(ndd, checksum)) {
-		u64 sum, sum_save;
-
-		sum_save = __le64_to_cpu(nd_label->checksum);
-		nd_label->checksum = __cpu_to_le64(0);
-		sum = nd_fletcher64(nd_label, sizeof_namespace_label(ndd), 1);
-		nd_label->checksum = __cpu_to_le64(sum_save);
-		if (sum != sum_save) {
-			dev_dbg(ndd->dev, "fail checksum. slot: %d expect: %#llx\n",
-				slot, sum);
-			return false;
-		}
-	}
-
-	return true;
+	valid = nsl_validate_checksum(ndd, nd_label);
+	if (!valid)
+		dev_dbg(ndd->dev, "fail checksum. slot: %d\n", slot);
+	return valid;
 }
 
 int nd_label_reserve_dpa(struct nvdimm_drvdata *ndd)
@@ -395,13 +411,13 @@ int nd_label_reserve_dpa(struct nvdimm_drvdata *ndd)
 			continue;
 
 		memcpy(label_uuid, nd_label->uuid, NSLABEL_UUID_LEN);
-		flags = __le32_to_cpu(nd_label->flags);
+		flags = nsl_get_flags(ndd, nd_label);
 		if (test_bit(NDD_NOBLK, &nvdimm->flags))
 			flags &= ~NSLABEL_FLAG_LOCAL;
 		nd_label_gen_id(&label_id, label_uuid, flags);
 		res = nvdimm_allocate_dpa(ndd, &label_id,
-				__le64_to_cpu(nd_label->dpa),
-				__le64_to_cpu(nd_label->rawsize));
+					  nsl_get_dpa(ndd, nd_label),
+					  nsl_get_rawsize(ndd, nd_label));
 		nd_dbg_dpa(nd_region, ndd, res, "reserve\n");
 		if (!res)
 			return -EBUSY;
@@ -548,9 +564,9 @@ int nd_label_active_count(struct nvdimm_drvdata *ndd)
 		nd_label = to_label(ndd, slot);
 
 		if (!slot_valid(ndd, nd_label, slot)) {
-			u32 label_slot = __le32_to_cpu(nd_label->slot);
-			u64 size = __le64_to_cpu(nd_label->rawsize);
-			u64 dpa = __le64_to_cpu(nd_label->dpa);
+			u32 label_slot = nsl_get_slot(ndd, nd_label);
+			u64 size = nsl_get_rawsize(ndd, nd_label);
+			u64 dpa = nsl_get_dpa(ndd, nd_label);
 
 			dev_dbg(ndd->dev,
 				"slot%d invalid slot: %d dpa: %llx size: %llx\n",
@@ -708,7 +724,7 @@ static unsigned long nd_label_offset(struct nvdimm_drvdata *ndd,
 		- (unsigned long) to_namespace_index(ndd, 0);
 }
 
-enum nvdimm_claim_class to_nvdimm_cclass(guid_t *guid)
+static enum nvdimm_claim_class to_nvdimm_cclass(guid_t *guid)
 {
 	if (guid_equal(guid, &nvdimm_btt_guid))
 		return NVDIMM_CCLASS_BTT;
@@ -756,6 +772,45 @@ static void reap_victim(struct nd_mapping *nd_mapping,
 	victim->label = NULL;
 }
 
+static void nsl_set_type_guid(struct nvdimm_drvdata *ndd,
+			      struct nd_namespace_label *nd_label, guid_t *guid)
+{
+	if (namespace_label_has(ndd, type_guid))
+		guid_copy(&nd_label->type_guid, guid);
+}
+
+bool nsl_validate_type_guid(struct nvdimm_drvdata *ndd,
+			    struct nd_namespace_label *nd_label, guid_t *guid)
+{
+	if (!namespace_label_has(ndd, type_guid))
+		return true;
+	if (!guid_equal(&nd_label->type_guid, guid)) {
+		dev_dbg(ndd->dev, "expect type_guid %pUb got %pUb\n", guid,
+			&nd_label->type_guid);
+		return false;
+	}
+	return true;
+}
+
+static void nsl_set_claim_class(struct nvdimm_drvdata *ndd,
+				struct nd_namespace_label *nd_label,
+				enum nvdimm_claim_class claim_class)
+{
+	if (!namespace_label_has(ndd, abstraction_guid))
+		return;
+	guid_copy(&nd_label->abstraction_guid,
+		  to_abstraction_guid(claim_class,
+				      &nd_label->abstraction_guid));
+}
+
+enum nvdimm_claim_class nsl_get_claim_class(struct nvdimm_drvdata *ndd,
+					    struct nd_namespace_label *nd_label)
+{
+	if (!namespace_label_has(ndd, abstraction_guid))
+		return NVDIMM_CCLASS_NONE;
+	return to_nvdimm_cclass(&nd_label->abstraction_guid);
+}
+
 static int __pmem_label_update(struct nd_region *nd_region,
 		struct nd_mapping *nd_mapping, struct nd_namespace_pmem *nspm,
 		int pos, unsigned long flags)
@@ -797,29 +852,18 @@ static int __pmem_label_update(struct nd_region *nd_region,
 	nd_label = to_label(ndd, slot);
 	memset(nd_label, 0, sizeof_namespace_label(ndd));
 	memcpy(nd_label->uuid, nspm->uuid, NSLABEL_UUID_LEN);
-	if (nspm->alt_name)
-		memcpy(nd_label->name, nspm->alt_name, NSLABEL_NAME_LEN);
-	nd_label->flags = __cpu_to_le32(flags);
-	nd_label->nlabel = __cpu_to_le16(nd_region->ndr_mappings);
-	nd_label->position = __cpu_to_le16(pos);
-	nd_label->isetcookie = __cpu_to_le64(cookie);
-	nd_label->rawsize = __cpu_to_le64(resource_size(res));
-	nd_label->lbasize = __cpu_to_le64(nspm->lbasize);
-	nd_label->dpa = __cpu_to_le64(res->start);
-	nd_label->slot = __cpu_to_le32(slot);
-	if (namespace_label_has(ndd, type_guid))
-		guid_copy(&nd_label->type_guid, &nd_set->type_guid);
-	if (namespace_label_has(ndd, abstraction_guid))
-		guid_copy(&nd_label->abstraction_guid,
-				to_abstraction_guid(ndns->claim_class,
-					&nd_label->abstraction_guid));
-	if (namespace_label_has(ndd, checksum)) {
-		u64 sum;
-
-		nd_label->checksum = __cpu_to_le64(0);
-		sum = nd_fletcher64(nd_label, sizeof_namespace_label(ndd), 1);
-		nd_label->checksum = __cpu_to_le64(sum);
-	}
+	nsl_set_name(ndd, nd_label, nspm->alt_name);
+	nsl_set_flags(ndd, nd_label, flags);
+	nsl_set_nlabel(ndd, nd_label, nd_region->ndr_mappings);
+	nsl_set_position(ndd, nd_label, pos);
+	nsl_set_isetcookie(ndd, nd_label, cookie);
+	nsl_set_rawsize(ndd, nd_label, resource_size(res));
+	nsl_set_lbasize(ndd, nd_label, nspm->lbasize);
+	nsl_set_dpa(ndd, nd_label, res->start);
+	nsl_set_slot(ndd, nd_label, slot);
+	nsl_set_type_guid(ndd, nd_label, &nd_set->type_guid);
+	nsl_set_claim_class(ndd, nd_label, ndns->claim_class);
+	nsl_calculate_checksum(ndd, nd_label);
 	nd_dbg_dpa(nd_region, ndd, res, "\n");
 
 	/* update label */
@@ -879,9 +923,9 @@ static struct resource *to_resource(struct nvdimm_drvdata *ndd,
 	struct resource *res;
 
 	for_each_dpa_resource(ndd, res) {
-		if (res->start != __le64_to_cpu(nd_label->dpa))
+		if (res->start != nsl_get_dpa(ndd, nd_label))
 			continue;
-		if (resource_size(res) != __le64_to_cpu(nd_label->rawsize))
+		if (resource_size(res) != nsl_get_rawsize(ndd, nd_label))
 			continue;
 		return res;
 	}
@@ -890,6 +934,59 @@ static struct resource *to_resource(struct nvdimm_drvdata *ndd,
 }
 
 /*
+ * Use the presence of the type_guid as a flag to determine isetcookie
+ * usage and nlabel + position policy for blk-aperture namespaces.
+ */
+static void nsl_set_blk_isetcookie(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label,
+				   u64 isetcookie)
+{
+	if (namespace_label_has(ndd, type_guid)) {
+		nsl_set_isetcookie(ndd, nd_label, isetcookie);
+		return;
+	}
+	nsl_set_isetcookie(ndd, nd_label, 0); /* N/A */
+}
+
+bool nsl_validate_blk_isetcookie(struct nvdimm_drvdata *ndd,
+				 struct nd_namespace_label *nd_label,
+				 u64 isetcookie)
+{
+	if (!namespace_label_has(ndd, type_guid))
+		return true;
+
+	if (nsl_get_isetcookie(ndd, nd_label) != isetcookie) {
+		dev_dbg(ndd->dev, "expect cookie %#llx got %#llx\n", isetcookie,
+			nsl_get_isetcookie(ndd, nd_label));
+		return false;
+	}
+
+	return true;
+}
+
+static void nsl_set_blk_nlabel(struct nvdimm_drvdata *ndd,
+			       struct nd_namespace_label *nd_label, int nlabel,
+			       bool first)
+{
+	if (!namespace_label_has(ndd, type_guid)) {
+		nsl_set_nlabel(ndd, nd_label, 0); /* N/A */
+		return;
+	}
+	nsl_set_nlabel(ndd, nd_label, first ? nlabel : 0xffff);
+}
+
+static void nsl_set_blk_position(struct nvdimm_drvdata *ndd,
+				 struct nd_namespace_label *nd_label,
+				 bool first)
+{
+	if (!namespace_label_has(ndd, type_guid)) {
+		nsl_set_position(ndd, nd_label, 0);
+		return;
+	}
+	nsl_set_position(ndd, nd_label, first ? 0 : 0xffff);
+}
+
+/*
  * 1/ Account all the labels that can be freed after this update
  * 2/ Allocate and write the label to the staging (next) index
  * 3/ Record the resources in the namespace device
@@ -1017,50 +1114,21 @@ static int __blk_label_update(struct nd_region *nd_region,
 		nd_label = to_label(ndd, slot);
 		memset(nd_label, 0, sizeof_namespace_label(ndd));
 		memcpy(nd_label->uuid, nsblk->uuid, NSLABEL_UUID_LEN);
-		if (nsblk->alt_name)
-			memcpy(nd_label->name, nsblk->alt_name,
-					NSLABEL_NAME_LEN);
-		nd_label->flags = __cpu_to_le32(NSLABEL_FLAG_LOCAL);
-
-		/*
-		 * Use the presence of the type_guid as a flag to
-		 * determine isetcookie usage and nlabel + position
-		 * policy for blk-aperture namespaces.
-		 */
-		if (namespace_label_has(ndd, type_guid)) {
-			if (i == min_dpa_idx) {
-				nd_label->nlabel = __cpu_to_le16(nsblk->num_resources);
-				nd_label->position = __cpu_to_le16(0);
-			} else {
-				nd_label->nlabel = __cpu_to_le16(0xffff);
-				nd_label->position = __cpu_to_le16(0xffff);
-			}
-			nd_label->isetcookie = __cpu_to_le64(nd_set->cookie2);
-		} else {
-			nd_label->nlabel = __cpu_to_le16(0); /* N/A */
-			nd_label->position = __cpu_to_le16(0); /* N/A */
-			nd_label->isetcookie = __cpu_to_le64(0); /* N/A */
-		}
-
-		nd_label->dpa = __cpu_to_le64(res->start);
-		nd_label->rawsize = __cpu_to_le64(resource_size(res));
-		nd_label->lbasize = __cpu_to_le64(nsblk->lbasize);
-		nd_label->slot = __cpu_to_le32(slot);
-		if (namespace_label_has(ndd, type_guid))
-			guid_copy(&nd_label->type_guid, &nd_set->type_guid);
-		if (namespace_label_has(ndd, abstraction_guid))
-			guid_copy(&nd_label->abstraction_guid,
-					to_abstraction_guid(ndns->claim_class,
-						&nd_label->abstraction_guid));
-
-		if (namespace_label_has(ndd, checksum)) {
-			u64 sum;
-
-			nd_label->checksum = __cpu_to_le64(0);
-			sum = nd_fletcher64(nd_label,
-					sizeof_namespace_label(ndd), 1);
-			nd_label->checksum = __cpu_to_le64(sum);
-		}
+		nsl_set_name(ndd, nd_label, nsblk->alt_name);
+		nsl_set_flags(ndd, nd_label, NSLABEL_FLAG_LOCAL);
+
+		nsl_set_blk_nlabel(ndd, nd_label, nsblk->num_resources,
+				   i == min_dpa_idx);
+		nsl_set_blk_position(ndd, nd_label, i == min_dpa_idx);
+		nsl_set_blk_isetcookie(ndd, nd_label, nd_set->cookie2);
+
+		nsl_set_dpa(ndd, nd_label, res->start);
+		nsl_set_rawsize(ndd, nd_label, resource_size(res));
+		nsl_set_lbasize(ndd, nd_label, nsblk->lbasize);
+		nsl_set_slot(ndd, nd_label, slot);
+		nsl_set_type_guid(ndd, nd_label, &nd_set->type_guid);
+		nsl_set_claim_class(ndd, nd_label, ndns->claim_class);
+		nsl_calculate_checksum(ndd, nd_label);
 
 		/* update label */
 		offset = nd_label_offset(ndd, nd_label);
diff --git a/drivers/nvdimm/label.h b/drivers/nvdimm/label.h
index 956b6d1bd8cc..31f94fad7b92 100644
--- a/drivers/nvdimm/label.h
+++ b/drivers/nvdimm/label.h
@@ -135,7 +135,6 @@ struct nd_namespace_label *nd_label_active(struct nvdimm_drvdata *ndd, int n);
 u32 nd_label_alloc_slot(struct nvdimm_drvdata *ndd);
 bool nd_label_free_slot(struct nvdimm_drvdata *ndd, u32 slot);
 u32 nd_label_nfree(struct nvdimm_drvdata *ndd);
-enum nvdimm_claim_class to_nvdimm_cclass(guid_t *guid);
 struct nd_region;
 struct nd_namespace_pmem;
 struct nd_namespace_blk;
diff --git a/drivers/nvdimm/namespace_devs.c b/drivers/nvdimm/namespace_devs.c
index 745478213ff2..4cec171c934d 100644
--- a/drivers/nvdimm/namespace_devs.c
+++ b/drivers/nvdimm/namespace_devs.c
@@ -1235,7 +1235,7 @@ static int namespace_update_uuid(struct nd_region *nd_region,
 			if (!nd_label)
 				continue;
 			nd_label_gen_id(&label_id, nd_label->uuid,
-					__le32_to_cpu(nd_label->flags));
+					nsl_get_flags(ndd, nd_label));
 			if (strcmp(old_label_id.id, label_id.id) == 0)
 				set_bit(ND_LABEL_REAP, &label_ent->flags);
 		}
@@ -1847,28 +1847,21 @@ static bool has_uuid_at_pos(struct nd_region *nd_region, u8 *uuid,
 		list_for_each_entry(label_ent, &nd_mapping->labels, list) {
 			struct nd_namespace_label *nd_label = label_ent->label;
 			u16 position, nlabel;
-			u64 isetcookie;
 
 			if (!nd_label)
 				continue;
-			isetcookie = __le64_to_cpu(nd_label->isetcookie);
-			position = __le16_to_cpu(nd_label->position);
-			nlabel = __le16_to_cpu(nd_label->nlabel);
+			position = nsl_get_position(ndd, nd_label);
+			nlabel = nsl_get_nlabel(ndd, nd_label);
 
-			if (isetcookie != cookie)
+			if (!nsl_validate_isetcookie(ndd, nd_label, cookie))
 				continue;
 
 			if (memcmp(nd_label->uuid, uuid, NSLABEL_UUID_LEN) != 0)
 				continue;
 
-			if (namespace_label_has(ndd, type_guid)
-					&& !guid_equal(&nd_set->type_guid,
-						&nd_label->type_guid)) {
-				dev_dbg(ndd->dev, "expect type_guid %pUb got %pUb\n",
-						&nd_set->type_guid,
-						&nd_label->type_guid);
+			if (!nsl_validate_type_guid(ndd, nd_label,
+						    &nd_set->type_guid))
 				continue;
-			}
 
 			if (found_uuid) {
 				dev_dbg(ndd->dev, "duplicate entry for uuid\n");
@@ -1923,8 +1916,8 @@ static int select_pmem_id(struct nd_region *nd_region, u8 *pmem_id)
 		 */
 		hw_start = nd_mapping->start;
 		hw_end = hw_start + nd_mapping->size;
-		pmem_start = __le64_to_cpu(nd_label->dpa);
-		pmem_end = pmem_start + __le64_to_cpu(nd_label->rawsize);
+		pmem_start = nsl_get_dpa(ndd, nd_label);
+		pmem_end = pmem_start + nsl_get_rawsize(ndd, nd_label);
 		if (pmem_start >= hw_start && pmem_start < hw_end
 				&& pmem_end <= hw_end && pmem_end > hw_start)
 			/* pass */;
@@ -1947,14 +1940,16 @@ static int select_pmem_id(struct nd_region *nd_region, u8 *pmem_id)
  * @nd_label: target pmem namespace label to evaluate
  */
 static struct device *create_namespace_pmem(struct nd_region *nd_region,
-		struct nd_namespace_index *nsindex,
-		struct nd_namespace_label *nd_label)
+					    struct nd_mapping *nd_mapping,
+					    struct nd_namespace_label *nd_label)
 {
+	struct nvdimm_drvdata *ndd = to_ndd(nd_mapping);
+	struct nd_namespace_index *nsindex =
+		to_namespace_index(ndd, ndd->ns_current);
 	u64 cookie = nd_region_interleave_set_cookie(nd_region, nsindex);
 	u64 altcookie = nd_region_interleave_set_altcookie(nd_region);
 	struct nd_label_ent *label_ent;
 	struct nd_namespace_pmem *nspm;
-	struct nd_mapping *nd_mapping;
 	resource_size_t size = 0;
 	struct resource *res;
 	struct device *dev;
@@ -1966,10 +1961,10 @@ static struct device *create_namespace_pmem(struct nd_region *nd_region,
 		return ERR_PTR(-ENXIO);
 	}
 
-	if (__le64_to_cpu(nd_label->isetcookie) != cookie) {
+	if (!nsl_validate_isetcookie(ndd, nd_label, cookie)) {
 		dev_dbg(&nd_region->dev, "invalid cookie in label: %pUb\n",
 				nd_label->uuid);
-		if (__le64_to_cpu(nd_label->isetcookie) != altcookie)
+		if (!nsl_validate_isetcookie(ndd, nd_label, altcookie))
 			return ERR_PTR(-EAGAIN);
 
 		dev_dbg(&nd_region->dev, "valid altcookie in label: %pUb\n",
@@ -2037,20 +2032,18 @@ static struct device *create_namespace_pmem(struct nd_region *nd_region,
 			continue;
 		}
 
-		size += __le64_to_cpu(label0->rawsize);
-		if (__le16_to_cpu(label0->position) != 0)
+		ndd = to_ndd(nd_mapping);
+		size += nsl_get_rawsize(ndd, label0);
+		if (nsl_get_position(ndd, label0) != 0)
 			continue;
 		WARN_ON(nspm->alt_name || nspm->uuid);
-		nspm->alt_name = kmemdup((void __force *) label0->name,
-				NSLABEL_NAME_LEN, GFP_KERNEL);
+		nspm->alt_name = kmemdup(nsl_ref_name(ndd, label0),
+					 NSLABEL_NAME_LEN, GFP_KERNEL);
 		nspm->uuid = kmemdup((void __force *) label0->uuid,
 				NSLABEL_UUID_LEN, GFP_KERNEL);
-		nspm->lbasize = __le64_to_cpu(label0->lbasize);
-		ndd = to_ndd(nd_mapping);
-		if (namespace_label_has(ndd, abstraction_guid))
-			nspm->nsio.common.claim_class
-				= to_nvdimm_cclass(&label0->abstraction_guid);
-
+		nspm->lbasize = nsl_get_lbasize(ndd, label0);
+		nspm->nsio.common.claim_class =
+			nsl_get_claim_class(ndd, label0);
 	}
 
 	if (!nspm->alt_name || !nspm->uuid) {
@@ -2237,7 +2230,7 @@ static int add_namespace_resource(struct nd_region *nd_region,
 		if (is_namespace_blk(devs[i])) {
 			res = nsblk_add_resource(nd_region, ndd,
 					to_nd_namespace_blk(devs[i]),
-					__le64_to_cpu(nd_label->dpa));
+					nsl_get_dpa(ndd, nd_label));
 			if (!res)
 				return -ENXIO;
 			nd_dbg_dpa(nd_region, ndd, res, "%d assign\n", count);
@@ -2265,21 +2258,10 @@ static struct device *create_namespace_blk(struct nd_region *nd_region,
 	struct device *dev = NULL;
 	struct resource *res;
 
-	if (namespace_label_has(ndd, type_guid)) {
-		if (!guid_equal(&nd_set->type_guid, &nd_label->type_guid)) {
-			dev_dbg(ndd->dev, "expect type_guid %pUb got %pUb\n",
-					&nd_set->type_guid,
-					&nd_label->type_guid);
-			return ERR_PTR(-EAGAIN);
-		}
-
-		if (nd_label->isetcookie != __cpu_to_le64(nd_set->cookie2)) {
-			dev_dbg(ndd->dev, "expect cookie %#llx got %#llx\n",
-					nd_set->cookie2,
-					__le64_to_cpu(nd_label->isetcookie));
-			return ERR_PTR(-EAGAIN);
-		}
-	}
+	if (!nsl_validate_type_guid(ndd, nd_label, &nd_set->type_guid))
+		return ERR_PTR(-EAGAIN);
+	if (!nsl_validate_blk_isetcookie(ndd, nd_label, nd_set->cookie2))
+		return ERR_PTR(-EAGAIN);
 
 	nsblk = kzalloc(sizeof(*nsblk), GFP_KERNEL);
 	if (!nsblk)
@@ -2288,23 +2270,19 @@ static struct device *create_namespace_blk(struct nd_region *nd_region,
 	dev->type = &namespace_blk_device_type;
 	dev->parent = &nd_region->dev;
 	nsblk->id = -1;
-	nsblk->lbasize = __le64_to_cpu(nd_label->lbasize);
-	nsblk->uuid = kmemdup(nd_label->uuid, NSLABEL_UUID_LEN,
-			GFP_KERNEL);
-	if (namespace_label_has(ndd, abstraction_guid))
-		nsblk->common.claim_class
-			= to_nvdimm_cclass(&nd_label->abstraction_guid);
+	nsblk->lbasize = nsl_get_lbasize(ndd, nd_label);
+	nsblk->uuid = kmemdup(nd_label->uuid, NSLABEL_UUID_LEN, GFP_KERNEL);
+	nsblk->common.claim_class = nsl_get_claim_class(ndd, nd_label);
 	if (!nsblk->uuid)
 		goto blk_err;
-	memcpy(name, nd_label->name, NSLABEL_NAME_LEN);
+	nsl_get_name(ndd, nd_label, name);
 	if (name[0]) {
-		nsblk->alt_name = kmemdup(name, NSLABEL_NAME_LEN,
-				GFP_KERNEL);
+		nsblk->alt_name = kmemdup(name, NSLABEL_NAME_LEN, GFP_KERNEL);
 		if (!nsblk->alt_name)
 			goto blk_err;
 	}
 	res = nsblk_add_resource(nd_region, ndd, nsblk,
-			__le64_to_cpu(nd_label->dpa));
+			nsl_get_dpa(ndd, nd_label));
 	if (!res)
 		goto blk_err;
 	nd_dbg_dpa(nd_region, ndd, res, "%d: assign\n", count);
@@ -2345,6 +2323,7 @@ static struct device **scan_labels(struct nd_region *nd_region)
 	struct device *dev, **devs = NULL;
 	struct nd_label_ent *label_ent, *e;
 	struct nd_mapping *nd_mapping = &nd_region->mapping[0];
+	struct nvdimm_drvdata *ndd = to_ndd(nd_mapping);
 	resource_size_t map_end = nd_mapping->start + nd_mapping->size - 1;
 
 	/* "safe" because create_namespace_pmem() might list_move() label_ent */
@@ -2355,7 +2334,7 @@ static struct device **scan_labels(struct nd_region *nd_region)
 
 		if (!nd_label)
 			continue;
-		flags = __le32_to_cpu(nd_label->flags);
+		flags = nsl_get_flags(ndd, nd_label);
 		if (is_nd_blk(&nd_region->dev)
 				== !!(flags & NSLABEL_FLAG_LOCAL))
 			/* pass, region matches label type */;
@@ -2363,9 +2342,9 @@ static struct device **scan_labels(struct nd_region *nd_region)
 			continue;
 
 		/* skip labels that describe extents outside of the region */
-		if (__le64_to_cpu(nd_label->dpa) < nd_mapping->start ||
-		    __le64_to_cpu(nd_label->dpa) > map_end)
-				continue;
+		if (nsl_get_dpa(ndd, nd_label) < nd_mapping->start ||
+		    nsl_get_dpa(ndd, nd_label) > map_end)
+			continue;
 
 		i = add_namespace_resource(nd_region, nd_label, devs, count);
 		if (i < 0)
@@ -2381,13 +2360,9 @@ static struct device **scan_labels(struct nd_region *nd_region)
 
 		if (is_nd_blk(&nd_region->dev))
 			dev = create_namespace_blk(nd_region, nd_label, count);
-		else {
-			struct nvdimm_drvdata *ndd = to_ndd(nd_mapping);
-			struct nd_namespace_index *nsindex;
-
-			nsindex = to_namespace_index(ndd, ndd->ns_current);
-			dev = create_namespace_pmem(nd_region, nsindex, nd_label);
-		}
+		else
+			dev = create_namespace_pmem(nd_region, nd_mapping,
+						    nd_label);
 
 		if (IS_ERR(dev)) {
 			switch (PTR_ERR(dev)) {
@@ -2571,10 +2546,10 @@ static int init_active_labels(struct nd_region *nd_region)
 				break;
 			label = nd_label_active(ndd, j);
 			if (test_bit(NDD_NOBLK, &nvdimm->flags)) {
-				u32 flags = __le32_to_cpu(label->flags);
+				u32 flags = nsl_get_flags(ndd, label);
 
 				flags &= ~NSLABEL_FLAG_LOCAL;
-				label->flags = __cpu_to_le32(flags);
+				nsl_set_flags(ndd, label, flags);
 			}
 			label_ent->label = label;
 
diff --git a/drivers/nvdimm/nd.h b/drivers/nvdimm/nd.h
index 696b55556d4d..5467ebbb4a6b 100644
--- a/drivers/nvdimm/nd.h
+++ b/drivers/nvdimm/nd.h
@@ -35,6 +35,156 @@ struct nvdimm_drvdata {
 	struct kref kref;
 };
 
+static inline const u8 *nsl_ref_name(struct nvdimm_drvdata *ndd,
+				     struct nd_namespace_label *nd_label)
+{
+	return nd_label->name;
+}
+
+static inline u8 *nsl_get_name(struct nvdimm_drvdata *ndd,
+			       struct nd_namespace_label *nd_label, u8 *name)
+{
+	return memcpy(name, nd_label->name, NSLABEL_NAME_LEN);
+}
+
+static inline u8 *nsl_set_name(struct nvdimm_drvdata *ndd,
+			       struct nd_namespace_label *nd_label, u8 *name)
+{
+	if (!name)
+		return NULL;
+	return memcpy(nd_label->name, name, NSLABEL_NAME_LEN);
+}
+
+static inline u32 nsl_get_slot(struct nvdimm_drvdata *ndd,
+			       struct nd_namespace_label *nd_label)
+{
+	return __le32_to_cpu(nd_label->slot);
+}
+
+static inline void nsl_set_slot(struct nvdimm_drvdata *ndd,
+				struct nd_namespace_label *nd_label, u32 slot)
+{
+	nd_label->slot = __cpu_to_le32(slot);
+}
+
+static inline u64 nsl_get_checksum(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label)
+{
+	return __le64_to_cpu(nd_label->checksum);
+}
+
+static inline void nsl_set_checksum(struct nvdimm_drvdata *ndd,
+				    struct nd_namespace_label *nd_label,
+				    u64 checksum)
+{
+	nd_label->checksum = __cpu_to_le64(checksum);
+}
+
+static inline u32 nsl_get_flags(struct nvdimm_drvdata *ndd,
+				struct nd_namespace_label *nd_label)
+{
+	return __le32_to_cpu(nd_label->flags);
+}
+
+static inline void nsl_set_flags(struct nvdimm_drvdata *ndd,
+				 struct nd_namespace_label *nd_label, u32 flags)
+{
+	nd_label->flags = __cpu_to_le32(flags);
+}
+
+static inline u64 nsl_get_dpa(struct nvdimm_drvdata *ndd,
+			      struct nd_namespace_label *nd_label)
+{
+	return __le64_to_cpu(nd_label->dpa);
+}
+
+static inline void nsl_set_dpa(struct nvdimm_drvdata *ndd,
+			       struct nd_namespace_label *nd_label, u64 dpa)
+{
+	nd_label->dpa = __cpu_to_le64(dpa);
+}
+
+static inline u64 nsl_get_rawsize(struct nvdimm_drvdata *ndd,
+				  struct nd_namespace_label *nd_label)
+{
+	return __le64_to_cpu(nd_label->rawsize);
+}
+
+static inline void nsl_set_rawsize(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label,
+				   u64 rawsize)
+{
+	nd_label->rawsize = __cpu_to_le64(rawsize);
+}
+
+static inline u64 nsl_get_isetcookie(struct nvdimm_drvdata *ndd,
+				     struct nd_namespace_label *nd_label)
+{
+	return __le64_to_cpu(nd_label->isetcookie);
+}
+
+static inline void nsl_set_isetcookie(struct nvdimm_drvdata *ndd,
+				      struct nd_namespace_label *nd_label,
+				      u64 isetcookie)
+{
+	nd_label->isetcookie = __cpu_to_le64(isetcookie);
+}
+
+static inline bool nsl_validate_isetcookie(struct nvdimm_drvdata *ndd,
+					   struct nd_namespace_label *nd_label,
+					   u64 cookie)
+{
+	return cookie == __le64_to_cpu(nd_label->isetcookie);
+}
+
+static inline u16 nsl_get_position(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label)
+{
+	return __le16_to_cpu(nd_label->position);
+}
+
+static inline void nsl_set_position(struct nvdimm_drvdata *ndd,
+				    struct nd_namespace_label *nd_label,
+				    u16 position)
+{
+	nd_label->position = __cpu_to_le16(position);
+}
+
+
+static inline u16 nsl_get_nlabel(struct nvdimm_drvdata *ndd,
+				 struct nd_namespace_label *nd_label)
+{
+	return __le16_to_cpu(nd_label->nlabel);
+}
+
+static inline void nsl_set_nlabel(struct nvdimm_drvdata *ndd,
+				  struct nd_namespace_label *nd_label,
+				  u16 nlabel)
+{
+	nd_label->nlabel = __cpu_to_le16(nlabel);
+}
+
+static inline u64 nsl_get_lbasize(struct nvdimm_drvdata *ndd,
+				  struct nd_namespace_label *nd_label)
+{
+	return __le64_to_cpu(nd_label->lbasize);
+}
+
+static inline void nsl_set_lbasize(struct nvdimm_drvdata *ndd,
+				   struct nd_namespace_label *nd_label,
+				   u64 lbasize)
+{
+	nd_label->lbasize = __cpu_to_le64(lbasize);
+}
+
+bool nsl_validate_blk_isetcookie(struct nvdimm_drvdata *ndd,
+				 struct nd_namespace_label *nd_label,
+				 u64 isetcookie);
+bool nsl_validate_type_guid(struct nvdimm_drvdata *ndd,
+			    struct nd_namespace_label *nd_label, guid_t *guid);
+enum nvdimm_claim_class nsl_get_claim_class(struct nvdimm_drvdata *ndd,
+					    struct nd_namespace_label *nd_label);
+
 struct nd_region_data {
 	int ns_count;
 	int ns_active;
diff --git a/drivers/nvdimm/pmem.c b/drivers/nvdimm/pmem.c
index 1e0615b8565e..72de88ff0d30 100644
--- a/drivers/nvdimm/pmem.c
+++ b/drivers/nvdimm/pmem.c
@@ -450,11 +450,11 @@ static int pmem_attach_disk(struct device *dev,
 		pmem->pfn_flags |= PFN_MAP;
 		bb_range = pmem->pgmap.range;
 	} else {
+		addr = devm_memremap(dev, pmem->phys_addr,
+				pmem->size, ARCH_MEMREMAP_PMEM);
 		if (devm_add_action_or_reset(dev, pmem_release_queue,
 					&pmem->pgmap))
 			return -ENOMEM;
-		addr = devm_memremap(dev, pmem->phys_addr,
-				pmem->size, ARCH_MEMREMAP_PMEM);
 		bb_range.start =  res->start;
 		bb_range.end = res->end;
 	}
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 8679a108f571..7efb31b87f37 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -116,6 +116,8 @@ static struct class *nvme_ns_chr_class;
 static void nvme_put_subsystem(struct nvme_subsystem *subsys);
 static void nvme_remove_invalid_namespaces(struct nvme_ctrl *ctrl,
 					   unsigned nsid);
+static void nvme_update_keep_alive(struct nvme_ctrl *ctrl,
+				   struct nvme_command *cmd);
 
 /*
  * Prepare a queue for teardown.
@@ -1152,7 +1154,8 @@ static u32 nvme_passthru_start(struct nvme_ctrl *ctrl, struct nvme_ns *ns,
 	return effects;
 }
 
-static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
+static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects,
+			      struct nvme_command *cmd, int status)
 {
 	if (effects & NVME_CMD_EFFECTS_CSE_MASK) {
 		nvme_unfreeze(ctrl);
@@ -1167,6 +1170,26 @@ static void nvme_passthru_end(struct nvme_ctrl *ctrl, u32 effects)
 		nvme_queue_scan(ctrl);
 		flush_work(&ctrl->scan_work);
 	}
+
+	switch (cmd->common.opcode) {
+	case nvme_admin_set_features:
+		switch (le32_to_cpu(cmd->common.cdw10) & 0xFF) {
+		case NVME_FEAT_KATO:
+			/*
+			 * Keep alive commands interval on the host should be
+			 * updated when KATO is modified by Set Features
+			 * commands.
+			 */
+			if (!status)
+				nvme_update_keep_alive(ctrl, cmd);
+			break;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
 }
 
 int nvme_execute_passthru_rq(struct request *rq)
@@ -1181,7 +1204,7 @@ int nvme_execute_passthru_rq(struct request *rq)
 	effects = nvme_passthru_start(ctrl, ns, cmd->common.opcode);
 	ret = nvme_execute_rq(disk, rq, false);
 	if (effects) /* nothing to be done for zero cmd effects */
-		nvme_passthru_end(ctrl, effects);
+		nvme_passthru_end(ctrl, effects, cmd, ret);
 
 	return ret;
 }
@@ -1269,6 +1292,21 @@ void nvme_stop_keep_alive(struct nvme_ctrl *ctrl)
 }
 EXPORT_SYMBOL_GPL(nvme_stop_keep_alive);
 
+static void nvme_update_keep_alive(struct nvme_ctrl *ctrl,
+				   struct nvme_command *cmd)
+{
+	unsigned int new_kato =
+		DIV_ROUND_UP(le32_to_cpu(cmd->common.cdw11), 1000);
+
+	dev_info(ctrl->device,
+		 "keep alive interval updated from %u ms to %u ms\n",
+		 ctrl->kato * 1000 / 2, new_kato * 1000 / 2);
+
+	nvme_stop_keep_alive(ctrl);
+	ctrl->kato = new_kato;
+	nvme_start_keep_alive(ctrl);
+}
+
 /*
  * In NVMe 1.0 the CNS field was just a binary controller or namespace
  * flag, thus sending any new CNS opcodes has a big chance of not working.
@@ -1302,11 +1340,6 @@ static int nvme_identify_ctrl(struct nvme_ctrl *dev, struct nvme_id_ctrl **id)
 	return error;
 }
 
-static bool nvme_multi_css(struct nvme_ctrl *ctrl)
-{
-	return (ctrl->ctrl_config & NVME_CC_CSS_MASK) == NVME_CC_CSS_CSI;
-}
-
 static int nvme_process_ns_desc(struct nvme_ctrl *ctrl, struct nvme_ns_ids *ids,
 		struct nvme_ns_id_desc *cur, bool *csi_seen)
 {
@@ -1874,6 +1907,7 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id)
 			goto out_unfreeze;
 	}
 
+	set_bit(NVME_NS_READY, &ns->flags);
 	blk_mq_unfreeze_queue(ns->disk->queue);
 
 	if (blk_queue_is_zoned(ns->queue)) {
@@ -1885,6 +1919,7 @@ static int nvme_update_ns_info(struct nvme_ns *ns, struct nvme_id_ns *id)
 	if (nvme_ns_head_multipath(ns->head)) {
 		blk_mq_freeze_queue(ns->head->disk->queue);
 		nvme_update_disk_info(ns->head->disk, ns, id);
+		nvme_mpath_revalidate_paths(ns);
 		blk_stack_limits(&ns->head->disk->queue->limits,
 				 &ns->queue->limits, 0);
 		disk_update_readahead(ns->head->disk);
@@ -3763,7 +3798,9 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid,
 
 	nvme_get_ctrl(ctrl);
 
-	device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups);
+	if (device_add_disk(ctrl->device, ns->disk, nvme_ns_id_attr_groups))
+		goto out_cleanup_ns_from_list;
+
 	if (!nvme_ns_head_multipath(ns->head))
 		nvme_add_ns_cdev(ns);
 
@@ -3773,6 +3810,11 @@ static void nvme_alloc_ns(struct nvme_ctrl *ctrl, unsigned nsid,
 
 	return;
 
+ out_cleanup_ns_from_list:
+	nvme_put_ctrl(ctrl);
+	down_write(&ctrl->namespaces_rwsem);
+	list_del_init(&ns->list);
+	up_write(&ctrl->namespaces_rwsem);
  out_unlink_ns:
 	mutex_lock(&ctrl->subsys->lock);
 	list_del_rcu(&ns->siblings);
@@ -3795,6 +3837,7 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 	if (test_and_set_bit(NVME_NS_REMOVING, &ns->flags))
 		return;
 
+	clear_bit(NVME_NS_READY, &ns->flags);
 	set_capacity(ns->disk, 0);
 	nvme_fault_inject_fini(&ns->fault_inject);
 
@@ -3802,9 +3845,12 @@ static void nvme_ns_remove(struct nvme_ns *ns)
 	list_del_rcu(&ns->siblings);
 	mutex_unlock(&ns->ctrl->subsys->lock);
 
-	synchronize_rcu(); /* guarantee not available in head->list */
-	nvme_mpath_clear_current_path(ns);
-	synchronize_srcu(&ns->head->srcu); /* wait for concurrent submissions */
+	/* guarantee not available in head->list */
+	synchronize_rcu();
+
+	/* wait for concurrent submissions */
+	if (nvme_mpath_clear_current_path(ns))
+		synchronize_srcu(&ns->head->srcu);
 
 	if (!nvme_ns_head_multipath(ns->head))
 		nvme_cdev_del(&ns->cdev, &ns->cdev_device);
diff --git a/drivers/nvme/host/multipath.c b/drivers/nvme/host/multipath.c
index 37ce3e8b1db2..5d7bc58a27bd 100644
--- a/drivers/nvme/host/multipath.c
+++ b/drivers/nvme/host/multipath.c
@@ -147,6 +147,21 @@ void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl)
 	mutex_unlock(&ctrl->scan_lock);
 }
 
+void nvme_mpath_revalidate_paths(struct nvme_ns *ns)
+{
+	struct nvme_ns_head *head = ns->head;
+	sector_t capacity = get_capacity(head->disk);
+	int node;
+
+	list_for_each_entry_rcu(ns, &head->list, siblings) {
+		if (capacity != get_capacity(ns->disk))
+			clear_bit(NVME_NS_READY, &ns->flags);
+	}
+
+	for_each_node(node)
+		rcu_assign_pointer(head->current_path[node], NULL);
+}
+
 static bool nvme_path_is_disabled(struct nvme_ns *ns)
 {
 	/*
@@ -158,7 +173,7 @@ static bool nvme_path_is_disabled(struct nvme_ns *ns)
 	    ns->ctrl->state != NVME_CTRL_DELETING)
 		return true;
 	if (test_bit(NVME_NS_ANA_PENDING, &ns->flags) ||
-	    test_bit(NVME_NS_REMOVING, &ns->flags))
+	    !test_bit(NVME_NS_READY, &ns->flags))
 		return true;
 	return false;
 }
@@ -465,6 +480,8 @@ int nvme_mpath_alloc_disk(struct nvme_ctrl *ctrl, struct nvme_ns_head *head)
 			ctrl->subsys->instance, head->instance);
 
 	blk_queue_flag_set(QUEUE_FLAG_NONROT, head->disk->queue);
+	blk_queue_flag_set(QUEUE_FLAG_NOWAIT, head->disk->queue);
+
 	/* set to a default value of 512 until the disk is validated */
 	blk_queue_logical_block_size(head->disk->queue, 512);
 	blk_set_stacking_limits(&head->disk->queue->limits);
diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h
index a2e1f298b217..9871c0c9374c 100644
--- a/drivers/nvme/host/nvme.h
+++ b/drivers/nvme/host/nvme.h
@@ -456,6 +456,7 @@ struct nvme_ns {
 #define NVME_NS_DEAD     	1
 #define NVME_NS_ANA_PENDING	2
 #define NVME_NS_FORCE_RO	3
+#define NVME_NS_READY		4
 
 	struct cdev		cdev;
 	struct device		cdev_device;
@@ -748,6 +749,7 @@ void nvme_mpath_init_ctrl(struct nvme_ctrl *ctrl);
 void nvme_mpath_uninit(struct nvme_ctrl *ctrl);
 void nvme_mpath_stop(struct nvme_ctrl *ctrl);
 bool nvme_mpath_clear_current_path(struct nvme_ns *ns);
+void nvme_mpath_revalidate_paths(struct nvme_ns *ns);
 void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl);
 void nvme_mpath_shutdown_disk(struct nvme_ns_head *head);
 
@@ -795,6 +797,9 @@ static inline bool nvme_mpath_clear_current_path(struct nvme_ns *ns)
 {
 	return false;
 }
+static inline void nvme_mpath_revalidate_paths(struct nvme_ns *ns)
+{
+}
 static inline void nvme_mpath_clear_ctrl_paths(struct nvme_ctrl *ctrl)
 {
 }
@@ -887,4 +892,9 @@ struct nvme_ctrl *nvme_ctrl_from_file(struct file *file);
 struct nvme_ns *nvme_find_get_ns(struct nvme_ctrl *ctrl, unsigned nsid);
 void nvme_put_ns(struct nvme_ns *ns);
 
+static inline bool nvme_multi_css(struct nvme_ctrl *ctrl)
+{
+	return (ctrl->ctrl_config & NVME_CC_CSS_MASK) == NVME_CC_CSS_CSI;
+}
+
 #endif /* _NVME_H */
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 645025620154..e2ab12f3f51c 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -45,6 +45,7 @@ struct nvme_tcp_request {
 	u32			pdu_len;
 	u32			pdu_sent;
 	u16			ttag;
+	__le16			status;
 	struct list_head	entry;
 	struct llist_node	lentry;
 	__le32			ddgst;
@@ -485,6 +486,7 @@ static void nvme_tcp_error_recovery(struct nvme_ctrl *ctrl)
 static int nvme_tcp_process_nvme_cqe(struct nvme_tcp_queue *queue,
 		struct nvme_completion *cqe)
 {
+	struct nvme_tcp_request *req;
 	struct request *rq;
 
 	rq = nvme_find_rq(nvme_tcp_tagset(queue), cqe->command_id);
@@ -496,7 +498,11 @@ static int nvme_tcp_process_nvme_cqe(struct nvme_tcp_queue *queue,
 		return -EINVAL;
 	}
 
-	if (!nvme_try_complete_req(rq, cqe->status, cqe->result))
+	req = blk_mq_rq_to_pdu(rq);
+	if (req->status == cpu_to_le16(NVME_SC_SUCCESS))
+		req->status = cqe->status;
+
+	if (!nvme_try_complete_req(rq, req->status, cqe->result))
 		nvme_complete_rq(rq);
 	queue->nr_cqe++;
 
@@ -758,7 +764,8 @@ static int nvme_tcp_recv_data(struct nvme_tcp_queue *queue, struct sk_buff *skb,
 			queue->ddgst_remaining = NVME_TCP_DIGEST_LENGTH;
 		} else {
 			if (pdu->hdr.flags & NVME_TCP_F_DATA_SUCCESS) {
-				nvme_tcp_end_request(rq, NVME_SC_SUCCESS);
+				nvme_tcp_end_request(rq,
+						le16_to_cpu(req->status));
 				queue->nr_cqe++;
 			}
 			nvme_tcp_init_recv_ctx(queue);
@@ -788,18 +795,24 @@ static int nvme_tcp_recv_ddgst(struct nvme_tcp_queue *queue,
 		return 0;
 
 	if (queue->recv_ddgst != queue->exp_ddgst) {
+		struct request *rq = nvme_cid_to_rq(nvme_tcp_tagset(queue),
+					pdu->command_id);
+		struct nvme_tcp_request *req = blk_mq_rq_to_pdu(rq);
+
+		req->status = cpu_to_le16(NVME_SC_DATA_XFER_ERROR);
+
 		dev_err(queue->ctrl->ctrl.device,
 			"data digest error: recv %#x expected %#x\n",
 			le32_to_cpu(queue->recv_ddgst),
 			le32_to_cpu(queue->exp_ddgst));
-		return -EIO;
 	}
 
 	if (pdu->hdr.flags & NVME_TCP_F_DATA_SUCCESS) {
 		struct request *rq = nvme_cid_to_rq(nvme_tcp_tagset(queue),
 					pdu->command_id);
+		struct nvme_tcp_request *req = blk_mq_rq_to_pdu(rq);
 
-		nvme_tcp_end_request(rq, NVME_SC_SUCCESS);
+		nvme_tcp_end_request(rq, le16_to_cpu(req->status));
 		queue->nr_cqe++;
 	}
 
@@ -2293,6 +2306,7 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns,
 		return ret;
 
 	req->state = NVME_TCP_SEND_CMD_PDU;
+	req->status = cpu_to_le16(NVME_SC_SUCCESS);
 	req->offset = 0;
 	req->data_sent = 0;
 	req->pdu_len = 0;
diff --git a/drivers/nvme/target/admin-cmd.c b/drivers/nvme/target/admin-cmd.c
index 0cb98f2bbc8c..aa6d84d8848e 100644
--- a/drivers/nvme/target/admin-cmd.c
+++ b/drivers/nvme/target/admin-cmd.c
@@ -1015,7 +1015,7 @@ u16 nvmet_parse_admin_cmd(struct nvmet_req *req)
 	if (unlikely(ret))
 		return ret;
 
-	if (nvmet_req_passthru_ctrl(req))
+	if (nvmet_is_passthru_req(req))
 		return nvmet_parse_passthru_admin_cmd(req);
 
 	switch (cmd->common.opcode) {
diff --git a/drivers/nvme/target/configfs.c b/drivers/nvme/target/configfs.c
index 273555127188..d784f3c200b4 100644
--- a/drivers/nvme/target/configfs.c
+++ b/drivers/nvme/target/configfs.c
@@ -1028,7 +1028,7 @@ nvmet_subsys_attr_version_store_locked(struct nvmet_subsys *subsys,
 	}
 
 	/* passthru subsystems use the underlying controller's version */
-	if (nvmet_passthru_ctrl(subsys))
+	if (nvmet_is_passthru_subsys(subsys))
 		return -EINVAL;
 
 	ret = sscanf(page, "%d.%d.%d\n", &major, &minor, &tertiary);
@@ -1067,7 +1067,8 @@ static ssize_t nvmet_subsys_attr_serial_show(struct config_item *item,
 {
 	struct nvmet_subsys *subsys = to_subsys(item);
 
-	return snprintf(page, PAGE_SIZE, "%s\n", subsys->serial);
+	return snprintf(page, PAGE_SIZE, "%*s\n",
+			NVMET_SN_MAX_SIZE, subsys->serial);
 }
 
 static ssize_t
diff --git a/drivers/nvme/target/core.c b/drivers/nvme/target/core.c
index 66d05eecc2a9..b8425fa34300 100644
--- a/drivers/nvme/target/core.c
+++ b/drivers/nvme/target/core.c
@@ -553,7 +553,7 @@ int nvmet_ns_enable(struct nvmet_ns *ns)
 	mutex_lock(&subsys->lock);
 	ret = 0;
 
-	if (nvmet_passthru_ctrl(subsys)) {
+	if (nvmet_is_passthru_subsys(subsys)) {
 		pr_info("cannot enable both passthru and regular namespaces for a single subsystem");
 		goto out_unlock;
 	}
@@ -869,7 +869,7 @@ static u16 nvmet_parse_io_cmd(struct nvmet_req *req)
 	if (unlikely(ret))
 		return ret;
 
-	if (nvmet_req_passthru_ctrl(req))
+	if (nvmet_is_passthru_req(req))
 		return nvmet_parse_passthru_io_cmd(req);
 
 	ret = nvmet_req_find_ns(req);
@@ -1206,6 +1206,9 @@ static void nvmet_init_cap(struct nvmet_ctrl *ctrl)
 	ctrl->cap |= (15ULL << 24);
 	/* maximum queue entries supported: */
 	ctrl->cap |= NVMET_QUEUE_SIZE - 1;
+
+	if (nvmet_is_passthru_subsys(ctrl->subsys))
+		nvmet_passthrough_override_cap(ctrl);
 }
 
 struct nvmet_ctrl *nvmet_ctrl_find_get(const char *subsysnqn,
@@ -1363,8 +1366,6 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 		goto out_put_subsystem;
 	mutex_init(&ctrl->lock);
 
-	nvmet_init_cap(ctrl);
-
 	ctrl->port = req->port;
 
 	INIT_WORK(&ctrl->async_event_work, nvmet_async_event_work);
@@ -1378,6 +1379,7 @@ u16 nvmet_alloc_ctrl(const char *subsysnqn, const char *hostnqn,
 
 	kref_init(&ctrl->ref);
 	ctrl->subsys = subsys;
+	nvmet_init_cap(ctrl);
 	WRITE_ONCE(ctrl->aen_enabled, NVMET_AEN_CFG_OPTIONAL);
 
 	ctrl->changed_ns_list = kmalloc_array(NVME_MAX_CHANGED_NAMESPACES,
diff --git a/drivers/nvme/target/nvmet.h b/drivers/nvme/target/nvmet.h
index 06dd3d537f07..7143c7fa7464 100644
--- a/drivers/nvme/target/nvmet.h
+++ b/drivers/nvme/target/nvmet.h
@@ -582,7 +582,7 @@ int nvmet_passthru_ctrl_enable(struct nvmet_subsys *subsys);
 void nvmet_passthru_ctrl_disable(struct nvmet_subsys *subsys);
 u16 nvmet_parse_passthru_admin_cmd(struct nvmet_req *req);
 u16 nvmet_parse_passthru_io_cmd(struct nvmet_req *req);
-static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
+static inline bool nvmet_is_passthru_subsys(struct nvmet_subsys *subsys)
 {
 	return subsys->passthru_ctrl;
 }
@@ -601,18 +601,19 @@ static inline u16 nvmet_parse_passthru_io_cmd(struct nvmet_req *req)
 {
 	return 0;
 }
-static inline struct nvme_ctrl *nvmet_passthru_ctrl(struct nvmet_subsys *subsys)
+static inline bool nvmet_is_passthru_subsys(struct nvmet_subsys *subsys)
 {
 	return NULL;
 }
 #endif /* CONFIG_NVME_TARGET_PASSTHRU */
 
-static inline struct nvme_ctrl *
-nvmet_req_passthru_ctrl(struct nvmet_req *req)
+static inline bool nvmet_is_passthru_req(struct nvmet_req *req)
 {
-	return nvmet_passthru_ctrl(nvmet_req_subsys(req));
+	return nvmet_is_passthru_subsys(nvmet_req_subsys(req));
 }
 
+void nvmet_passthrough_override_cap(struct nvmet_ctrl *ctrl);
+
 u16 errno_to_nvme_status(struct nvmet_req *req, int errno);
 u16 nvmet_report_invalid_opcode(struct nvmet_req *req);
 
diff --git a/drivers/nvme/target/passthru.c b/drivers/nvme/target/passthru.c
index 225cd1ffbe45..f0efb3537989 100644
--- a/drivers/nvme/target/passthru.c
+++ b/drivers/nvme/target/passthru.c
@@ -20,6 +20,16 @@ MODULE_IMPORT_NS(NVME_TARGET_PASSTHRU);
  */
 static DEFINE_XARRAY(passthru_subsystems);
 
+void nvmet_passthrough_override_cap(struct nvmet_ctrl *ctrl)
+{
+	/*
+	 * Multiple command set support can only be declared if the underlying
+	 * controller actually supports it.
+	 */
+	if (!nvme_multi_css(ctrl->subsys->passthru_ctrl))
+		ctrl->cap &= ~(1ULL << 43);
+}
+
 static u16 nvmet_passthru_override_id_ctrl(struct nvmet_req *req)
 {
 	struct nvmet_ctrl *ctrl = req->sq->ctrl;
@@ -218,7 +228,7 @@ static int nvmet_passthru_map_sg(struct nvmet_req *req, struct request *rq)
 
 static void nvmet_passthru_execute_cmd(struct nvmet_req *req)
 {
-	struct nvme_ctrl *ctrl = nvmet_req_passthru_ctrl(req);
+	struct nvme_ctrl *ctrl = nvmet_req_subsys(req)->passthru_ctrl;
 	struct request_queue *q = ctrl->admin_q;
 	struct nvme_ns *ns = NULL;
 	struct request *rq = NULL;
@@ -299,7 +309,7 @@ out:
  */
 static void nvmet_passthru_set_host_behaviour(struct nvmet_req *req)
 {
-	struct nvme_ctrl *ctrl = nvmet_req_passthru_ctrl(req);
+	struct nvme_ctrl *ctrl = nvmet_req_subsys(req)->passthru_ctrl;
 	struct nvme_feat_host_behavior *host;
 	u16 status = NVME_SC_INTERNAL;
 	int ret;
diff --git a/drivers/of/property.c b/drivers/of/property.c
index 0c0dc2e369c0..3fd74bb34819 100644
--- a/drivers/of/property.c
+++ b/drivers/of/property.c
@@ -1444,6 +1444,9 @@ static int of_fwnode_add_links(struct fwnode_handle *fwnode)
 	struct property *p;
 	struct device_node *con_np = to_of_node(fwnode);
 
+	if (IS_ENABLED(CONFIG_X86))
+		return 0;
+
 	if (!con_np)
 		return -EINVAL;
 
diff --git a/drivers/parisc/dino.c b/drivers/parisc/dino.c
index 889d7ce282eb..952a92504df6 100644
--- a/drivers/parisc/dino.c
+++ b/drivers/parisc/dino.c
@@ -156,15 +156,6 @@ static inline struct dino_device *DINO_DEV(struct pci_hba_data *hba)
 	return container_of(hba, struct dino_device, hba);
 }
 
-/* Check if PCI device is behind a Card-mode Dino. */
-static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
-{
-	struct dino_device *dino_dev;
-
-	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
-	return is_card_dino(&dino_dev->hba.dev->id);
-}
-
 /*
  * Dino Configuration Space Accessor Functions
  */
@@ -447,6 +438,15 @@ static void quirk_cirrus_cardbus(struct pci_dev *dev)
 DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_6832, quirk_cirrus_cardbus );
 
 #ifdef CONFIG_TULIP
+/* Check if PCI device is behind a Card-mode Dino. */
+static int pci_dev_is_behind_card_dino(struct pci_dev *dev)
+{
+	struct dino_device *dino_dev;
+
+	dino_dev = DINO_DEV(parisc_walk_tree(dev->bus->bridge));
+	return is_card_dino(&dino_dev->hba.dev->id);
+}
+
 static void pci_fixup_tulip(struct pci_dev *dev)
 {
 	if (!pci_dev_is_behind_card_dino(dev))
diff --git a/drivers/pci/ats.c b/drivers/pci/ats.c
index 6d7d64939f82..c967ad6e2626 100644
--- a/drivers/pci/ats.c
+++ b/drivers/pci/ats.c
@@ -376,7 +376,7 @@ int pci_enable_pasid(struct pci_dev *pdev, int features)
 	if (WARN_ON(pdev->pasid_enabled))
 		return -EBUSY;
 
-	if (!pdev->eetlp_prefix_path)
+	if (!pdev->eetlp_prefix_path && !pdev->pasid_no_tlp)
 		return -EINVAL;
 
 	if (!pasid)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 5e1e3796efa4..326f7d13024f 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -40,6 +40,7 @@ config PCI_FTPCI100
 config PCI_IXP4XX
 	bool "Intel IXP4xx PCI controller"
 	depends on ARM && OF
+	depends on ARCH_IXP4XX || COMPILE_TEST
 	default ARCH_IXP4XX
 	help
 	  Say Y here if you want support for the PCI host controller found
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index 35e61048e133..ffb176d288cd 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -27,6 +27,7 @@
 #define STATUS_REG_SYS_2	0x508
 #define STATUS_CLR_REG_SYS_2	0x708
 #define LINK_DOWN		BIT(1)
+#define J7200_LINK_DOWN		BIT(10)
 
 #define J721E_PCIE_USER_CMD_STATUS	0x4
 #define LINK_TRAINING_ENABLE		BIT(0)
@@ -57,6 +58,7 @@ struct j721e_pcie {
 	struct cdns_pcie	*cdns_pcie;
 	void __iomem		*user_cfg_base;
 	void __iomem		*intd_cfg_base;
+	u32			linkdown_irq_regfield;
 };
 
 enum j721e_pcie_mode {
@@ -66,7 +68,10 @@ enum j721e_pcie_mode {
 
 struct j721e_pcie_data {
 	enum j721e_pcie_mode	mode;
-	bool quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
+	u32			linkdown_irq_regfield;
+	unsigned int		byte_access_allowed:1;
 };
 
 static inline u32 j721e_pcie_user_readl(struct j721e_pcie *pcie, u32 offset)
@@ -98,12 +103,12 @@ static irqreturn_t j721e_pcie_link_irq_handler(int irq, void *priv)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, STATUS_REG_SYS_2);
-	if (!(reg & LINK_DOWN))
+	if (!(reg & pcie->linkdown_irq_regfield))
 		return IRQ_NONE;
 
 	dev_err(dev, "LINK DOWN!\n");
 
-	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, LINK_DOWN);
+	j721e_pcie_intd_writel(pcie, STATUS_CLR_REG_SYS_2, pcie->linkdown_irq_regfield);
 	return IRQ_HANDLED;
 }
 
@@ -112,7 +117,7 @@ static void j721e_pcie_config_link_irq(struct j721e_pcie *pcie)
 	u32 reg;
 
 	reg = j721e_pcie_intd_readl(pcie, ENABLE_REG_SYS_2);
-	reg |= LINK_DOWN;
+	reg |= pcie->linkdown_irq_regfield;
 	j721e_pcie_intd_writel(pcie, ENABLE_REG_SYS_2, reg);
 }
 
@@ -284,10 +289,36 @@ static struct pci_ops cdns_ti_pcie_host_ops = {
 static const struct j721e_pcie_data j721e_pcie_rc_data = {
 	.mode = PCI_MODE_RC,
 	.quirk_retrain_flag = true,
+	.byte_access_allowed = false,
+	.linkdown_irq_regfield = LINK_DOWN,
 };
 
 static const struct j721e_pcie_data j721e_pcie_ep_data = {
 	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = LINK_DOWN,
+};
+
+static const struct j721e_pcie_data j7200_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.quirk_detect_quiet_flag = true,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data j7200_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.quirk_detect_quiet_flag = true,
+};
+
+static const struct j721e_pcie_data am64_pcie_rc_data = {
+	.mode = PCI_MODE_RC,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
+	.byte_access_allowed = true,
+};
+
+static const struct j721e_pcie_data am64_pcie_ep_data = {
+	.mode = PCI_MODE_EP,
+	.linkdown_irq_regfield = J7200_LINK_DOWN,
 };
 
 static const struct of_device_id of_j721e_pcie_match[] = {
@@ -299,6 +330,22 @@ static const struct of_device_id of_j721e_pcie_match[] = {
 		.compatible = "ti,j721e-pcie-ep",
 		.data = &j721e_pcie_ep_data,
 	},
+	{
+		.compatible = "ti,j7200-pcie-host",
+		.data = &j7200_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,j7200-pcie-ep",
+		.data = &j7200_pcie_ep_data,
+	},
+	{
+		.compatible = "ti,am64-pcie-host",
+		.data = &am64_pcie_rc_data,
+	},
+	{
+		.compatible = "ti,am64-pcie-ep",
+		.data = &am64_pcie_ep_data,
+	},
 	{},
 };
 
@@ -332,6 +379,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 
 	pcie->dev = dev;
 	pcie->mode = mode;
+	pcie->linkdown_irq_regfield = data->linkdown_irq_regfield;
 
 	base = devm_platform_ioremap_resource_byname(pdev, "intd_cfg");
 	if (IS_ERR(base))
@@ -391,9 +439,11 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			goto err_get_sync;
 		}
 
-		bridge->ops = &cdns_ti_pcie_host_ops;
+		if (!data->byte_access_allowed)
+			bridge->ops = &cdns_ti_pcie_host_ops;
 		rc = pci_host_bridge_priv(bridge);
 		rc->quirk_retrain_flag = data->quirk_retrain_flag;
+		rc->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &rc->pcie;
 		cdns_pcie->dev = dev;
@@ -459,6 +509,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
 			ret = -ENOMEM;
 			goto err_get_sync;
 		}
+		ep->quirk_detect_quiet_flag = data->quirk_detect_quiet_flag;
 
 		cdns_pcie = &ep->pcie;
 		cdns_pcie->dev = dev;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-ep.c b/drivers/pci/controller/cadence/pcie-cadence-ep.c
index 897cdde02bd8..88e05b9c2e5b 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-ep.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-ep.c
@@ -16,11 +16,37 @@
 #define CDNS_PCIE_EP_IRQ_PCI_ADDR_NONE		0x1
 #define CDNS_PCIE_EP_IRQ_PCI_ADDR_LEGACY	0x3
 
-static int cdns_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
+static u8 cdns_pcie_get_fn_from_vfn(struct cdns_pcie *pcie, u8 fn, u8 vfn)
+{
+	u32 cap = CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET;
+	u32 first_vf_offset, stride;
+
+	if (vfn == 0)
+		return fn;
+
+	first_vf_offset = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_SRIOV_VF_OFFSET);
+	stride = cdns_pcie_ep_fn_readw(pcie, fn, cap +  PCI_SRIOV_VF_STRIDE);
+	fn = fn + first_vf_offset + ((vfn - 1) * stride);
+
+	return fn;
+}
+
+static int cdns_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
 				     struct pci_epf_header *hdr)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
+	u32 cap = CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET;
 	struct cdns_pcie *pcie = &ep->pcie;
+	u32 reg;
+
+	if (vfn > 1) {
+		dev_err(&epc->dev, "Only Virtual Function #1 has deviceID\n");
+		return -EINVAL;
+	} else if (vfn == 1) {
+		reg = cap + PCI_SRIOV_VF_DID;
+		cdns_pcie_ep_fn_writew(pcie, fn, reg, hdr->deviceid);
+		return 0;
+	}
 
 	cdns_pcie_ep_fn_writew(pcie, fn, PCI_DEVICE_ID, hdr->deviceid);
 	cdns_pcie_ep_fn_writeb(pcie, fn, PCI_REVISION_ID, hdr->revid);
@@ -47,7 +73,7 @@ static int cdns_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static int cdns_pcie_ep_set_bar(struct pci_epc *epc, u8 fn,
+static int cdns_pcie_ep_set_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 				struct pci_epf_bar *epf_bar)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
@@ -92,32 +118,36 @@ static int cdns_pcie_ep_set_bar(struct pci_epc *epc, u8 fn,
 
 	addr0 = lower_32_bits(bar_phys);
 	addr1 = upper_32_bits(bar_phys);
+
+	if (vfn == 1)
+		reg = CDNS_PCIE_LM_EP_VFUNC_BAR_CFG(bar, fn);
+	else
+		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG(bar, fn);
+	b = (bar < BAR_4) ? bar : bar - BAR_4;
+
+	if (vfn == 0 || vfn == 1) {
+		cfg = cdns_pcie_readl(pcie, reg);
+		cfg &= ~(CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE_MASK(b) |
+			 CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL_MASK(b));
+		cfg |= (CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE(b, aperture) |
+			CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL(b, ctrl));
+		cdns_pcie_writel(pcie, reg, cfg);
+	}
+
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_EP_FUNC_BAR_ADDR0(fn, bar),
 			 addr0);
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_EP_FUNC_BAR_ADDR1(fn, bar),
 			 addr1);
 
-	if (bar < BAR_4) {
-		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG0(fn);
-		b = bar;
-	} else {
-		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG1(fn);
-		b = bar - BAR_4;
-	}
-
-	cfg = cdns_pcie_readl(pcie, reg);
-	cfg &= ~(CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE_MASK(b) |
-		 CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL_MASK(b));
-	cfg |= (CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE(b, aperture) |
-		CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL(b, ctrl));
-	cdns_pcie_writel(pcie, reg, cfg);
-
+	if (vfn > 0)
+		epf = &epf->epf[vfn - 1];
 	epf->epf_bar[bar] = epf_bar;
 
 	return 0;
 }
 
-static void cdns_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
+static void cdns_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 				   struct pci_epf_bar *epf_bar)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
@@ -126,29 +156,32 @@ static void cdns_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
 	enum pci_barno bar = epf_bar->barno;
 	u32 reg, cfg, b, ctrl;
 
-	if (bar < BAR_4) {
-		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG0(fn);
-		b = bar;
-	} else {
-		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG1(fn);
-		b = bar - BAR_4;
+	if (vfn == 1)
+		reg = CDNS_PCIE_LM_EP_VFUNC_BAR_CFG(bar, fn);
+	else
+		reg = CDNS_PCIE_LM_EP_FUNC_BAR_CFG(bar, fn);
+	b = (bar < BAR_4) ? bar : bar - BAR_4;
+
+	if (vfn == 0 || vfn == 1) {
+		ctrl = CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED;
+		cfg = cdns_pcie_readl(pcie, reg);
+		cfg &= ~(CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE_MASK(b) |
+			 CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL_MASK(b));
+		cfg |= CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL(b, ctrl);
+		cdns_pcie_writel(pcie, reg, cfg);
 	}
 
-	ctrl = CDNS_PCIE_LM_BAR_CFG_CTRL_DISABLED;
-	cfg = cdns_pcie_readl(pcie, reg);
-	cfg &= ~(CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE_MASK(b) |
-		 CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL_MASK(b));
-	cfg |= CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_CTRL(b, ctrl);
-	cdns_pcie_writel(pcie, reg, cfg);
-
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_EP_FUNC_BAR_ADDR0(fn, bar), 0);
 	cdns_pcie_writel(pcie, CDNS_PCIE_AT_IB_EP_FUNC_BAR_ADDR1(fn, bar), 0);
 
+	if (vfn > 0)
+		epf = &epf->epf[vfn - 1];
 	epf->epf_bar[bar] = NULL;
 }
 
-static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, phys_addr_t addr,
-				 u64 pci_addr, size_t size)
+static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
+				 phys_addr_t addr, u64 pci_addr, size_t size)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
@@ -161,6 +194,7 @@ static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, phys_addr_t addr,
 		return -EINVAL;
 	}
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
 	cdns_pcie_set_outbound_region(pcie, 0, fn, r, false, addr, pci_addr, size);
 
 	set_bit(r, &ep->ob_region_map);
@@ -169,7 +203,7 @@ static int cdns_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, phys_addr_t addr,
 	return 0;
 }
 
-static void cdns_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
+static void cdns_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 				    phys_addr_t addr)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
@@ -189,13 +223,15 @@ static void cdns_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
 	clear_bit(r, &ep->ob_region_map);
 }
 
-static int cdns_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 mmc)
+static int cdns_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 vfn, u8 mmc)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	u32 cap = CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET;
 	u16 flags;
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	/*
 	 * Set the Multiple Message Capable bitfield into the Message Control
 	 * register.
@@ -209,13 +245,15 @@ static int cdns_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 mmc)
 	return 0;
 }
 
-static int cdns_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
+static int cdns_pcie_ep_get_msi(struct pci_epc *epc, u8 fn, u8 vfn)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	u32 cap = CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET;
 	u16 flags, mme;
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	/* Validate that the MSI feature is actually enabled. */
 	flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS);
 	if (!(flags & PCI_MSI_FLAGS_ENABLE))
@@ -230,13 +268,15 @@ static int cdns_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
 	return mme;
 }
 
-static int cdns_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
+static int cdns_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	u32 cap = CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET;
 	u32 val, reg;
 
+	func_no = cdns_pcie_get_fn_from_vfn(pcie, func_no, vfunc_no);
+
 	reg = cap + PCI_MSIX_FLAGS;
 	val = cdns_pcie_ep_fn_readw(pcie, func_no, reg);
 	if (!(val & PCI_MSIX_FLAGS_ENABLE))
@@ -247,14 +287,17 @@ static int cdns_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
 	return val;
 }
 
-static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u16 interrupts,
-				 enum pci_barno bir, u32 offset)
+static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u8 vfn,
+				 u16 interrupts, enum pci_barno bir,
+				 u32 offset)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
 	struct cdns_pcie *pcie = &ep->pcie;
 	u32 cap = CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET;
 	u32 val, reg;
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	reg = cap + PCI_MSIX_FLAGS;
 	val = cdns_pcie_ep_fn_readw(pcie, fn, reg);
 	val &= ~PCI_MSIX_FLAGS_QSIZE;
@@ -274,8 +317,8 @@ static int cdns_pcie_ep_set_msix(struct pci_epc *epc, u8 fn, u16 interrupts,
 	return 0;
 }
 
-static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
-				     u8 intx, bool is_asserted)
+static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn, u8 intx,
+				     bool is_asserted)
 {
 	struct cdns_pcie *pcie = &ep->pcie;
 	unsigned long flags;
@@ -317,7 +360,8 @@ static void cdns_pcie_ep_assert_intx(struct cdns_pcie_ep *ep, u8 fn,
 	writel(0, ep->irq_cpu_addr + offset);
 }
 
-static int cdns_pcie_ep_send_legacy_irq(struct cdns_pcie_ep *ep, u8 fn, u8 intx)
+static int cdns_pcie_ep_send_legacy_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
+					u8 intx)
 {
 	u16 cmd;
 
@@ -334,7 +378,7 @@ static int cdns_pcie_ep_send_legacy_irq(struct cdns_pcie_ep *ep, u8 fn, u8 intx)
 	return 0;
 }
 
-static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
+static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
 				     u8 interrupt_num)
 {
 	struct cdns_pcie *pcie = &ep->pcie;
@@ -343,6 +387,8 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
 	u8 msi_count;
 	u64 pci_addr, pci_addr_mask = 0xff;
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	/* Check whether the MSI feature has been enabled by the PCI host. */
 	flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS);
 	if (!(flags & PCI_MSI_FLAGS_ENABLE))
@@ -382,7 +428,7 @@ static int cdns_pcie_ep_send_msi_irq(struct cdns_pcie_ep *ep, u8 fn,
 	return 0;
 }
 
-static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn,
+static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn, u8 vfn,
 				    phys_addr_t addr, u8 interrupt_num,
 				    u32 entry_size, u32 *msi_data,
 				    u32 *msi_addr_offset)
@@ -396,6 +442,8 @@ static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn,
 	int ret;
 	int i;
 
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	/* Check whether the MSI feature has been enabled by the PCI host. */
 	flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSI_FLAGS);
 	if (!(flags & PCI_MSI_FLAGS_ENABLE))
@@ -419,7 +467,7 @@ static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn,
 	pci_addr &= GENMASK_ULL(63, 2);
 
 	for (i = 0; i < interrupt_num; i++) {
-		ret = cdns_pcie_ep_map_addr(epc, fn, addr,
+		ret = cdns_pcie_ep_map_addr(epc, fn, vfn, addr,
 					    pci_addr & ~pci_addr_mask,
 					    entry_size);
 		if (ret)
@@ -433,7 +481,7 @@ static int cdns_pcie_ep_map_msi_irq(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn,
+static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn, u8 vfn,
 				      u16 interrupt_num)
 {
 	u32 cap = CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET;
@@ -446,6 +494,12 @@ static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn,
 	u16 flags;
 	u8 bir;
 
+	epf = &ep->epf[fn];
+	if (vfn > 0)
+		epf = &epf->epf[vfn - 1];
+
+	fn = cdns_pcie_get_fn_from_vfn(pcie, fn, vfn);
+
 	/* Check whether the MSI-X feature has been enabled by the PCI host. */
 	flags = cdns_pcie_ep_fn_readw(pcie, fn, cap + PCI_MSIX_FLAGS);
 	if (!(flags & PCI_MSIX_FLAGS_ENABLE))
@@ -456,7 +510,6 @@ static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn,
 	bir = tbl_offset & PCI_MSIX_TABLE_BIR;
 	tbl_offset &= PCI_MSIX_TABLE_OFFSET;
 
-	epf = &ep->epf[fn];
 	msix_tbl = epf->epf_bar[bir]->addr + tbl_offset;
 	msg_addr = msix_tbl[(interrupt_num - 1)].msg_addr;
 	msg_data = msix_tbl[(interrupt_num - 1)].msg_data;
@@ -478,21 +531,27 @@ static int cdns_pcie_ep_send_msix_irq(struct cdns_pcie_ep *ep, u8 fn,
 	return 0;
 }
 
-static int cdns_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn,
+static int cdns_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn, u8 vfn,
 				  enum pci_epc_irq_type type,
 				  u16 interrupt_num)
 {
 	struct cdns_pcie_ep *ep = epc_get_drvdata(epc);
+	struct cdns_pcie *pcie = &ep->pcie;
+	struct device *dev = pcie->dev;
 
 	switch (type) {
 	case PCI_EPC_IRQ_LEGACY:
-		return cdns_pcie_ep_send_legacy_irq(ep, fn, 0);
+		if (vfn > 0) {
+			dev_err(dev, "Cannot raise legacy interrupts for VF\n");
+			return -EINVAL;
+		}
+		return cdns_pcie_ep_send_legacy_irq(ep, fn, vfn, 0);
 
 	case PCI_EPC_IRQ_MSI:
-		return cdns_pcie_ep_send_msi_irq(ep, fn, interrupt_num);
+		return cdns_pcie_ep_send_msi_irq(ep, fn, vfn, interrupt_num);
 
 	case PCI_EPC_IRQ_MSIX:
-		return cdns_pcie_ep_send_msix_irq(ep, fn, interrupt_num);
+		return cdns_pcie_ep_send_msix_irq(ep, fn, vfn, interrupt_num);
 
 	default:
 		break;
@@ -523,6 +582,13 @@ static int cdns_pcie_ep_start(struct pci_epc *epc)
 	return 0;
 }
 
+static const struct pci_epc_features cdns_pcie_epc_vf_features = {
+	.linkup_notifier = false,
+	.msi_capable = true,
+	.msix_capable = true,
+	.align = 65536,
+};
+
 static const struct pci_epc_features cdns_pcie_epc_features = {
 	.linkup_notifier = false,
 	.msi_capable = true,
@@ -531,9 +597,12 @@ static const struct pci_epc_features cdns_pcie_epc_features = {
 };
 
 static const struct pci_epc_features*
-cdns_pcie_ep_get_features(struct pci_epc *epc, u8 func_no)
+cdns_pcie_ep_get_features(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
-	return &cdns_pcie_epc_features;
+	if (!vfunc_no)
+		return &cdns_pcie_epc_features;
+
+	return &cdns_pcie_epc_vf_features;
 }
 
 static const struct pci_epc_ops cdns_pcie_epc_ops = {
@@ -559,9 +628,11 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct device_node *np = dev->of_node;
 	struct cdns_pcie *pcie = &ep->pcie;
+	struct cdns_pcie_epf *epf;
 	struct resource *res;
 	struct pci_epc *epc;
 	int ret;
+	int i;
 
 	pcie->is_rc = false;
 
@@ -606,6 +677,25 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	if (!ep->epf)
 		return -ENOMEM;
 
+	epc->max_vfs = devm_kcalloc(dev, epc->max_functions,
+				    sizeof(*epc->max_vfs), GFP_KERNEL);
+	if (!epc->max_vfs)
+		return -ENOMEM;
+
+	ret = of_property_read_u8_array(np, "max-virtual-functions",
+					epc->max_vfs, epc->max_functions);
+	if (ret == 0) {
+		for (i = 0; i < epc->max_functions; i++) {
+			epf = &ep->epf[i];
+			if (epc->max_vfs[i] == 0)
+				continue;
+			epf->epf = devm_kcalloc(dev, epc->max_vfs[i],
+						sizeof(*ep->epf), GFP_KERNEL);
+			if (!epf->epf)
+				return -ENOMEM;
+		}
+	}
+
 	ret = pci_epc_mem_init(epc, pcie->mem_res->start,
 			       resource_size(pcie->mem_res), PAGE_SIZE);
 	if (ret < 0) {
@@ -623,6 +713,10 @@ int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	ep->irq_pci_addr = CDNS_PCIE_EP_IRQ_PCI_ADDR_NONE;
 	/* Reserve region 0 for IRQs */
 	set_bit(0, &ep->ob_region_map);
+
+	if (ep->quirk_detect_quiet_flag)
+		cdns_pcie_detect_quiet_min_delay_set(&ep->pcie);
+
 	spin_lock_init(&ep->lock);
 
 	return 0;
diff --git a/drivers/pci/controller/cadence/pcie-cadence-host.c b/drivers/pci/controller/cadence/pcie-cadence-host.c
index ae1c55503513..fb96d37a135c 100644
--- a/drivers/pci/controller/cadence/pcie-cadence-host.c
+++ b/drivers/pci/controller/cadence/pcie-cadence-host.c
@@ -498,6 +498,9 @@ int cdns_pcie_host_setup(struct cdns_pcie_rc *rc)
 		return PTR_ERR(rc->cfg_base);
 	rc->cfg_res = res;
 
+	if (rc->quirk_detect_quiet_flag)
+		cdns_pcie_detect_quiet_min_delay_set(&rc->pcie);
+
 	ret = cdns_pcie_start_link(pcie);
 	if (ret) {
 		dev_err(dev, "Failed to start link\n");
diff --git a/drivers/pci/controller/cadence/pcie-cadence.c b/drivers/pci/controller/cadence/pcie-cadence.c
index 3c3646502d05..52767f26048f 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.c
+++ b/drivers/pci/controller/cadence/pcie-cadence.c
@@ -7,6 +7,22 @@
 
 #include "pcie-cadence.h"
 
+void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie)
+{
+	u32 delay = 0x3;
+	u32 ltssm_control_cap;
+
+	/*
+	 * Set the LTSSM Detect Quiet state min. delay to 2ms.
+	 */
+	ltssm_control_cap = cdns_pcie_readl(pcie, CDNS_PCIE_LTSSM_CONTROL_CAP);
+	ltssm_control_cap = ((ltssm_control_cap &
+			    ~CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK) |
+			    CDNS_PCIE_DETECT_QUIET_MIN_DELAY(delay));
+
+	cdns_pcie_writel(pcie, CDNS_PCIE_LTSSM_CONTROL_CAP, ltssm_control_cap);
+}
+
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 busnr, u8 fn,
 				   u32 r, bool is_io,
 				   u64 cpu_addr, u64 pci_addr, size_t size)
diff --git a/drivers/pci/controller/cadence/pcie-cadence.h b/drivers/pci/controller/cadence/pcie-cadence.h
index 30db2d68c17a..262421e5d917 100644
--- a/drivers/pci/controller/cadence/pcie-cadence.h
+++ b/drivers/pci/controller/cadence/pcie-cadence.h
@@ -8,6 +8,7 @@
 
 #include <linux/kernel.h>
 #include <linux/pci.h>
+#include <linux/pci-epf.h>
 #include <linux/phy/phy.h>
 
 /* Parameters for the waiting for link up routine */
@@ -46,10 +47,18 @@
 #define  CDNS_PCIE_LM_EP_ID_BUS_SHIFT	8
 
 /* Endpoint Function f BAR b Configuration Registers */
+#define CDNS_PCIE_LM_EP_FUNC_BAR_CFG(bar, fn) \
+	(((bar) < BAR_4) ? CDNS_PCIE_LM_EP_FUNC_BAR_CFG0(fn) : CDNS_PCIE_LM_EP_FUNC_BAR_CFG1(fn))
 #define CDNS_PCIE_LM_EP_FUNC_BAR_CFG0(fn) \
 	(CDNS_PCIE_LM_BASE + 0x0240 + (fn) * 0x0008)
 #define CDNS_PCIE_LM_EP_FUNC_BAR_CFG1(fn) \
 	(CDNS_PCIE_LM_BASE + 0x0244 + (fn) * 0x0008)
+#define CDNS_PCIE_LM_EP_VFUNC_BAR_CFG(bar, fn) \
+	(((bar) < BAR_4) ? CDNS_PCIE_LM_EP_VFUNC_BAR_CFG0(fn) : CDNS_PCIE_LM_EP_VFUNC_BAR_CFG1(fn))
+#define CDNS_PCIE_LM_EP_VFUNC_BAR_CFG0(fn) \
+	(CDNS_PCIE_LM_BASE + 0x0280 + (fn) * 0x0008)
+#define CDNS_PCIE_LM_EP_VFUNC_BAR_CFG1(fn) \
+	(CDNS_PCIE_LM_BASE + 0x0284 + (fn) * 0x0008)
 #define  CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE_MASK(b) \
 	(GENMASK(4, 0) << ((b) * 8))
 #define  CDNS_PCIE_LM_EP_FUNC_BAR_CFG_BAR_APERTURE(b, a) \
@@ -114,6 +123,7 @@
 
 #define CDNS_PCIE_EP_FUNC_MSI_CAP_OFFSET	0x90
 #define CDNS_PCIE_EP_FUNC_MSIX_CAP_OFFSET	0xb0
+#define CDNS_PCIE_EP_FUNC_SRIOV_CAP_OFFSET	0x200
 
 /*
  * Root Port Registers (PCI configuration space for the root port function)
@@ -189,6 +199,14 @@
 /* AXI link down register */
 #define CDNS_PCIE_AT_LINKDOWN (CDNS_PCIE_AT_BASE + 0x0824)
 
+/* LTSSM Capabilities register */
+#define CDNS_PCIE_LTSSM_CONTROL_CAP             (CDNS_PCIE_LM_BASE + 0x0054)
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK  GENMASK(2, 1)
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY_SHIFT 1
+#define  CDNS_PCIE_DETECT_QUIET_MIN_DELAY(delay) \
+	 (((delay) << CDNS_PCIE_DETECT_QUIET_MIN_DELAY_SHIFT) & \
+	 CDNS_PCIE_DETECT_QUIET_MIN_DELAY_MASK)
+
 enum cdns_pcie_rp_bar {
 	RP_BAR_UNDEFINED = -1,
 	RP_BAR0,
@@ -295,6 +313,7 @@ struct cdns_pcie {
  * @avail_ib_bar: Satus of RP_BAR0, RP_BAR1 and	RP_NO_BAR if it's free or
  *                available
  * @quirk_retrain_flag: Retrain link as quirk for PCIe Gen2
+ * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
  */
 struct cdns_pcie_rc {
 	struct cdns_pcie	pcie;
@@ -303,14 +322,17 @@ struct cdns_pcie_rc {
 	u32			vendor_id;
 	u32			device_id;
 	bool			avail_ib_bar[CDNS_PCIE_RP_MAX_IB];
-	bool                    quirk_retrain_flag;
+	unsigned int		quirk_retrain_flag:1;
+	unsigned int		quirk_detect_quiet_flag:1;
 };
 
 /**
  * struct cdns_pcie_epf - Structure to hold info about endpoint function
+ * @epf: Info about virtual functions attached to the physical function
  * @epf_bar: reference to the pci_epf_bar for the six Base Address Registers
  */
 struct cdns_pcie_epf {
+	struct cdns_pcie_epf *epf;
 	struct pci_epf_bar *epf_bar[PCI_STD_NUM_BARS];
 };
 
@@ -334,6 +356,7 @@ struct cdns_pcie_epf {
  *        registers fields (RMW) accessible by both remote RC and EP to
  *        minimize time between read and write
  * @epf: Structure to hold info about endpoint function
+ * @quirk_detect_quiet_flag: LTSSM Detect Quiet min delay set as quirk
  */
 struct cdns_pcie_ep {
 	struct cdns_pcie	pcie;
@@ -348,6 +371,7 @@ struct cdns_pcie_ep {
 	/* protect writing to PCI_STATUS while raising legacy interrupts */
 	spinlock_t		lock;
 	struct cdns_pcie_epf	*epf;
+	unsigned int		quirk_detect_quiet_flag:1;
 };
 
 
@@ -508,6 +532,9 @@ static inline int cdns_pcie_ep_setup(struct cdns_pcie_ep *ep)
 	return 0;
 }
 #endif
+
+void cdns_pcie_detect_quiet_min_delay_set(struct cdns_pcie *pcie);
+
 void cdns_pcie_set_outbound_region(struct cdns_pcie *pcie, u8 busnr, u8 fn,
 				   u32 r, bool is_io,
 				   u64 cpu_addr, u64 pci_addr, size_t size);
diff --git a/drivers/pci/controller/dwc/Kconfig b/drivers/pci/controller/dwc/Kconfig
index 423d35872ce4..76c0a63a3f64 100644
--- a/drivers/pci/controller/dwc/Kconfig
+++ b/drivers/pci/controller/dwc/Kconfig
@@ -214,6 +214,17 @@ config PCIE_ARTPEC6_EP
 	  Enables support for the PCIe controller in the ARTPEC-6 SoC to work in
 	  endpoint mode. This uses the DesignWare core.
 
+config PCIE_ROCKCHIP_DW_HOST
+	bool "Rockchip DesignWare PCIe controller"
+	select PCIE_DW
+	select PCIE_DW_HOST
+	depends on PCI_MSI_IRQ_DOMAIN
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	depends on OF
+	help
+	  Enables support for the DesignWare PCIe controller in the
+	  Rockchip SoC except RK3399.
+
 config PCIE_INTEL_GW
 	bool "Intel Gateway PCIe host controller support"
 	depends on OF && (X86 || COMPILE_TEST)
@@ -225,6 +236,34 @@ config PCIE_INTEL_GW
 	  The PCIe controller uses the DesignWare core plus Intel-specific
 	  hardware wrappers.
 
+config PCIE_KEEMBAY
+	bool
+
+config PCIE_KEEMBAY_HOST
+	bool "Intel Keem Bay PCIe controller - Host mode"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on PCI && PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	select PCIE_KEEMBAY
+	help
+	  Say 'Y' here to enable support for the PCIe controller in Keem Bay
+	  to work in host mode.
+	  The PCIe controller is based on DesignWare Hardware and uses
+	  DesignWare core functions.
+
+config PCIE_KEEMBAY_EP
+	bool "Intel Keem Bay PCIe controller - Endpoint mode"
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on PCI && PCI_MSI_IRQ_DOMAIN
+	depends on PCI_ENDPOINT
+	select PCIE_DW_EP
+	select PCIE_KEEMBAY
+	help
+	  Say 'Y' here to enable support for the PCIe controller in Keem Bay
+	  to work in endpoint mode.
+	  The PCIe controller is based on DesignWare Hardware and uses
+	  DesignWare core functions.
+
 config PCIE_KIRIN
 	depends on OF && (ARM64 || COMPILE_TEST)
 	bool "HiSilicon Kirin series SoCs PCIe controllers"
@@ -286,6 +325,15 @@ config PCIE_TEGRA194_EP
 	  in order to enable device-specific features PCIE_TEGRA194_EP must be
 	  selected. This uses the DesignWare core.
 
+config PCIE_VISCONTI_HOST
+	bool "Toshiba Visconti PCIe controllers"
+	depends on ARCH_VISCONTI || COMPILE_TEST
+	depends on PCI_MSI_IRQ_DOMAIN
+	select PCIE_DW_HOST
+	help
+	  Say Y here if you want PCIe controller support on Toshiba Visconti SoC.
+	  This driver supports TMPV7708 SoC.
+
 config PCIE_UNIPHIER
 	bool "Socionext UniPhier PCIe host controllers"
 	depends on ARCH_UNIPHIER || COMPILE_TEST
diff --git a/drivers/pci/controller/dwc/Makefile b/drivers/pci/controller/dwc/Makefile
index 9e6ce0dc2f53..73244409792c 100644
--- a/drivers/pci/controller/dwc/Makefile
+++ b/drivers/pci/controller/dwc/Makefile
@@ -14,13 +14,16 @@ obj-$(CONFIG_PCI_LAYERSCAPE_EP) += pci-layerscape-ep.o
 obj-$(CONFIG_PCIE_QCOM) += pcie-qcom.o
 obj-$(CONFIG_PCIE_ARMADA_8K) += pcie-armada8k.o
 obj-$(CONFIG_PCIE_ARTPEC6) += pcie-artpec6.o
+obj-$(CONFIG_PCIE_ROCKCHIP_DW_HOST) += pcie-dw-rockchip.o
 obj-$(CONFIG_PCIE_INTEL_GW) += pcie-intel-gw.o
+obj-$(CONFIG_PCIE_KEEMBAY) += pcie-keembay.o
 obj-$(CONFIG_PCIE_KIRIN) += pcie-kirin.o
 obj-$(CONFIG_PCIE_HISI_STB) += pcie-histb.o
 obj-$(CONFIG_PCI_MESON) += pci-meson.o
 obj-$(CONFIG_PCIE_TEGRA194) += pcie-tegra194.o
 obj-$(CONFIG_PCIE_UNIPHIER) += pcie-uniphier.o
 obj-$(CONFIG_PCIE_UNIPHIER_EP) += pcie-uniphier-ep.o
+obj-$(CONFIG_PCIE_VISCONTI_HOST) += pcie-visconti.o
 
 # The following drivers are for devices that use the generic ACPI
 # pci_root.c driver but don't support standard ECAM config access.
diff --git a/drivers/pci/controller/dwc/pci-dra7xx.c b/drivers/pci/controller/dwc/pci-dra7xx.c
index 047cfbdc1330..fbbb78f6885e 100644
--- a/drivers/pci/controller/dwc/pci-dra7xx.c
+++ b/drivers/pci/controller/dwc/pci-dra7xx.c
@@ -204,7 +204,7 @@ static int dra7xx_pcie_handle_msi(struct pcie_port *pp, int index)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	unsigned long val;
-	int pos, irq;
+	int pos;
 
 	val = dw_pcie_readl_dbi(pci, PCIE_MSI_INTR0_STATUS +
 				   (index * MSI_REG_CTRL_BLOCK_SIZE));
@@ -213,9 +213,8 @@ static int dra7xx_pcie_handle_msi(struct pcie_port *pp, int index)
 
 	pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL, 0);
 	while (pos != MAX_MSI_IRQS_PER_CTRL) {
-		irq = irq_find_mapping(pp->irq_domain,
-				       (index * MAX_MSI_IRQS_PER_CTRL) + pos);
-		generic_handle_irq(irq);
+		generic_handle_domain_irq(pp->irq_domain,
+					  (index * MAX_MSI_IRQS_PER_CTRL) + pos);
 		pos++;
 		pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL, pos);
 	}
@@ -257,7 +256,7 @@ static void dra7xx_pcie_msi_irq_handler(struct irq_desc *desc)
 	struct dw_pcie *pci;
 	struct pcie_port *pp;
 	unsigned long reg;
-	u32 virq, bit;
+	u32 bit;
 
 	chained_irq_enter(chip, desc);
 
@@ -276,11 +275,8 @@ static void dra7xx_pcie_msi_irq_handler(struct irq_desc *desc)
 	case INTB:
 	case INTC:
 	case INTD:
-		for_each_set_bit(bit, &reg, PCI_NUM_INTX) {
-			virq = irq_find_mapping(dra7xx->irq_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-		}
+		for_each_set_bit(bit, &reg, PCI_NUM_INTX)
+			generic_handle_domain_irq(dra7xx->irq_domain, bit);
 		break;
 	}
 
diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c
index bde3b2824e89..865258d8c53c 100644
--- a/drivers/pci/controller/dwc/pci-keystone.c
+++ b/drivers/pci/controller/dwc/pci-keystone.c
@@ -259,14 +259,12 @@ static void ks_pcie_handle_legacy_irq(struct keystone_pcie *ks_pcie,
 	struct dw_pcie *pci = ks_pcie->pci;
 	struct device *dev = pci->dev;
 	u32 pending;
-	int virq;
 
 	pending = ks_pcie_app_readl(ks_pcie, IRQ_STATUS(offset));
 
 	if (BIT(0) & pending) {
-		virq = irq_linear_revmap(ks_pcie->legacy_irq_domain, offset);
-		dev_dbg(dev, ": irq: irq_offset %d, virq %d\n", offset, virq);
-		generic_handle_irq(virq);
+		dev_dbg(dev, ": irq: irq_offset %d", offset);
+		generic_handle_domain_irq(ks_pcie->legacy_irq_domain, offset);
 	}
 
 	/* EOI the INTx interrupt */
@@ -579,7 +577,7 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 	struct pcie_port *pp = &pci->pp;
 	struct device *dev = pci->dev;
 	struct irq_chip *chip = irq_desc_get_chip(desc);
-	u32 vector, virq, reg, pos;
+	u32 vector, reg, pos;
 
 	dev_dbg(dev, "%s, irq %d\n", __func__, irq);
 
@@ -600,10 +598,8 @@ static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
 			continue;
 
 		vector = offset + (pos << 3);
-		virq = irq_linear_revmap(pp->irq_domain, vector);
-		dev_dbg(dev, "irq: bit %d, vector %d, virq %d\n", pos, vector,
-			virq);
-		generic_handle_irq(virq);
+		dev_dbg(dev, "irq: bit %d, vector %d\n", pos, vector);
+		generic_handle_domain_irq(pp->irq_domain, vector);
 	}
 
 	chained_irq_exit(chip, desc);
diff --git a/drivers/pci/controller/dwc/pcie-artpec6.c b/drivers/pci/controller/dwc/pcie-artpec6.c
index 597c282f586c..c91fc1954432 100644
--- a/drivers/pci/controller/dwc/pcie-artpec6.c
+++ b/drivers/pci/controller/dwc/pcie-artpec6.c
@@ -384,6 +384,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 	const struct artpec_pcie_of_data *data;
 	enum artpec_pcie_variants variant;
 	enum dw_pcie_device_mode mode;
+	u32 val;
 
 	match = of_match_device(artpec6_pcie_of_match, dev);
 	if (!match)
@@ -432,9 +433,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 		if (ret < 0)
 			return ret;
 		break;
-	case DW_PCIE_EP_TYPE: {
-		u32 val;
-
+	case DW_PCIE_EP_TYPE:
 		if (!IS_ENABLED(CONFIG_PCIE_ARTPEC6_EP))
 			return -ENODEV;
 
@@ -445,8 +444,6 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
 		pci->ep.ops = &pcie_ep_ops;
 
 		return dw_pcie_ep_init(&pci->ep);
-		break;
-	}
 	default:
 		dev_err(dev, "INVALID device type %d\n", artpec6_pcie->mode);
 	}
diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
index 8d028a88b375..998b698f4085 100644
--- a/drivers/pci/controller/dwc/pcie-designware-ep.c
+++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
@@ -125,7 +125,7 @@ static u8 dw_pcie_ep_find_capability(struct dw_pcie_ep *ep, u8 func_no, u8 cap)
 	return __dw_pcie_ep_find_next_cap(ep, func_no, next_cap_ptr, cap);
 }
 
-static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no,
+static int dw_pcie_ep_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				   struct pci_epf_header *hdr)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
@@ -202,7 +202,7 @@ static int dw_pcie_ep_outbound_atu(struct dw_pcie_ep *ep, u8 func_no,
 	return 0;
 }
 
-static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
+static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				 struct pci_epf_bar *epf_bar)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
@@ -217,7 +217,7 @@ static void dw_pcie_ep_clear_bar(struct pci_epc *epc, u8 func_no,
 	ep->epf_bar[bar] = NULL;
 }
 
-static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
+static int dw_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			      struct pci_epf_bar *epf_bar)
 {
 	int ret;
@@ -276,7 +276,7 @@ static int dw_pcie_find_index(struct dw_pcie_ep *ep, phys_addr_t addr,
 	return -EINVAL;
 }
 
-static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no,
+static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				  phys_addr_t addr)
 {
 	int ret;
@@ -292,9 +292,8 @@ static void dw_pcie_ep_unmap_addr(struct pci_epc *epc, u8 func_no,
 	clear_bit(atu_index, ep->ob_window_map);
 }
 
-static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
-			       phys_addr_t addr,
-			       u64 pci_addr, size_t size)
+static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			       phys_addr_t addr, u64 pci_addr, size_t size)
 {
 	int ret;
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
@@ -309,7 +308,7 @@ static int dw_pcie_ep_map_addr(struct pci_epc *epc, u8 func_no,
 	return 0;
 }
 
-static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
+static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -333,7 +332,8 @@ static int dw_pcie_ep_get_msi(struct pci_epc *epc, u8 func_no)
 	return val;
 }
 
-static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
+static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			      u8 interrupts)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -358,7 +358,7 @@ static int dw_pcie_ep_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 	return 0;
 }
 
-static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
+static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -382,8 +382,8 @@ static int dw_pcie_ep_get_msix(struct pci_epc *epc, u8 func_no)
 	return val;
 }
 
-static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
-			       enum pci_barno bir, u32 offset)
+static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			       u16 interrupts, enum pci_barno bir, u32 offset)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
@@ -418,7 +418,7 @@ static int dw_pcie_ep_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
 	return 0;
 }
 
-static int dw_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no,
+static int dw_pcie_ep_raise_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				enum pci_epc_irq_type type, u16 interrupt_num)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
@@ -450,7 +450,7 @@ static int dw_pcie_ep_start(struct pci_epc *epc)
 }
 
 static const struct pci_epc_features*
-dw_pcie_ep_get_features(struct pci_epc *epc, u8 func_no)
+dw_pcie_ep_get_features(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	struct dw_pcie_ep *ep = epc_get_drvdata(epc);
 
@@ -525,14 +525,14 @@ int dw_pcie_ep_raise_msi_irq(struct dw_pcie_ep *ep, u8 func_no,
 	aligned_offset = msg_addr_lower & (epc->mem->window.page_size - 1);
 	msg_addr = ((u64)msg_addr_upper) << 32 |
 			(msg_addr_lower & ~aligned_offset);
-	ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys, msg_addr,
+	ret = dw_pcie_ep_map_addr(epc, func_no, 0, ep->msi_mem_phys, msg_addr,
 				  epc->mem->window.page_size);
 	if (ret)
 		return ret;
 
 	writel(msg_data | (interrupt_num - 1), ep->msi_mem + aligned_offset);
 
-	dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
+	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->msi_mem_phys);
 
 	return 0;
 }
@@ -593,14 +593,14 @@ int dw_pcie_ep_raise_msix_irq(struct dw_pcie_ep *ep, u8 func_no,
 	}
 
 	aligned_offset = msg_addr & (epc->mem->window.page_size - 1);
-	ret = dw_pcie_ep_map_addr(epc, func_no, ep->msi_mem_phys,  msg_addr,
+	ret = dw_pcie_ep_map_addr(epc, func_no, 0, ep->msi_mem_phys, msg_addr,
 				  epc->mem->window.page_size);
 	if (ret)
 		return ret;
 
 	writel(msg_data, ep->msi_mem + aligned_offset);
 
-	dw_pcie_ep_unmap_addr(epc, func_no, ep->msi_mem_phys);
+	dw_pcie_ep_unmap_addr(epc, func_no, 0, ep->msi_mem_phys);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
index a608ae1fad57..d1d9b8344ec9 100644
--- a/drivers/pci/controller/dwc/pcie-designware-host.c
+++ b/drivers/pci/controller/dwc/pcie-designware-host.c
@@ -55,7 +55,7 @@ static struct msi_domain_info dw_pcie_msi_domain_info = {
 /* MSI int handler */
 irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 {
-	int i, pos, irq;
+	int i, pos;
 	unsigned long val;
 	u32 status, num_ctrls;
 	irqreturn_t ret = IRQ_NONE;
@@ -74,10 +74,9 @@ irqreturn_t dw_handle_msi_irq(struct pcie_port *pp)
 		pos = 0;
 		while ((pos = find_next_bit(&val, MAX_MSI_IRQS_PER_CTRL,
 					    pos)) != MAX_MSI_IRQS_PER_CTRL) {
-			irq = irq_find_mapping(pp->irq_domain,
-					       (i * MAX_MSI_IRQS_PER_CTRL) +
-					       pos);
-			generic_handle_irq(irq);
+			generic_handle_domain_irq(pp->irq_domain,
+						  (i * MAX_MSI_IRQS_PER_CTRL) +
+						  pos);
 			pos++;
 		}
 	}
diff --git a/drivers/pci/controller/dwc/pcie-designware-plat.c b/drivers/pci/controller/dwc/pcie-designware-plat.c
index 9b397c807261..8851eb161a0e 100644
--- a/drivers/pci/controller/dwc/pcie-designware-plat.c
+++ b/drivers/pci/controller/dwc/pcie-designware-plat.c
@@ -164,7 +164,6 @@ static int dw_plat_pcie_probe(struct platform_device *pdev)
 
 		pci->ep.ops = &pcie_ep_ops;
 		return dw_pcie_ep_init(&pci->ep);
-		break;
 	default:
 		dev_err(dev, "INVALID device type %d\n", dw_plat_pcie->mode);
 	}
diff --git a/drivers/pci/controller/dwc/pcie-dw-rockchip.c b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
new file mode 100644
index 000000000000..c9b341e55cbb
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-dw-rockchip.c
@@ -0,0 +1,279 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * PCIe host controller driver for Rockchip SoCs.
+ *
+ * Copyright (C) 2021 Rockchip Electronics Co., Ltd.
+ *		http://www.rock-chips.com
+ *
+ * Author: Simon Xue <xxm@rock-chips.com>
+ */
+
+#include <linux/clk.h>
+#include <linux/gpio/consumer.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/reset.h>
+
+#include "pcie-designware.h"
+
+/*
+ * The upper 16 bits of PCIE_CLIENT_CONFIG are a write
+ * mask for the lower 16 bits.
+ */
+#define HIWORD_UPDATE(mask, val) (((mask) << 16) | (val))
+#define HIWORD_UPDATE_BIT(val)	HIWORD_UPDATE(val, val)
+
+#define to_rockchip_pcie(x) dev_get_drvdata((x)->dev)
+
+#define PCIE_CLIENT_RC_MODE		HIWORD_UPDATE_BIT(0x40)
+#define PCIE_CLIENT_ENABLE_LTSSM	HIWORD_UPDATE_BIT(0xc)
+#define PCIE_SMLH_LINKUP		BIT(16)
+#define PCIE_RDLH_LINKUP		BIT(17)
+#define PCIE_LINKUP			(PCIE_SMLH_LINKUP | PCIE_RDLH_LINKUP)
+#define PCIE_L0S_ENTRY			0x11
+#define PCIE_CLIENT_GENERAL_CONTROL	0x0
+#define PCIE_CLIENT_GENERAL_DEBUG	0x104
+#define PCIE_CLIENT_HOT_RESET_CTRL      0x180
+#define PCIE_CLIENT_LTSSM_STATUS	0x300
+#define PCIE_LTSSM_ENABLE_ENHANCE       BIT(4)
+#define PCIE_LTSSM_STATUS_MASK		GENMASK(5, 0)
+
+struct rockchip_pcie {
+	struct dw_pcie			pci;
+	void __iomem			*apb_base;
+	struct phy			*phy;
+	struct clk_bulk_data		*clks;
+	unsigned int			clk_cnt;
+	struct reset_control		*rst;
+	struct gpio_desc		*rst_gpio;
+	struct regulator                *vpcie3v3;
+};
+
+static int rockchip_pcie_readl_apb(struct rockchip_pcie *rockchip,
+					     u32 reg)
+{
+	return readl_relaxed(rockchip->apb_base + reg);
+}
+
+static void rockchip_pcie_writel_apb(struct rockchip_pcie *rockchip,
+						u32 val, u32 reg)
+{
+	writel_relaxed(val, rockchip->apb_base + reg);
+}
+
+static void rockchip_pcie_enable_ltssm(struct rockchip_pcie *rockchip)
+{
+	rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_ENABLE_LTSSM,
+				 PCIE_CLIENT_GENERAL_CONTROL);
+}
+
+static int rockchip_pcie_link_up(struct dw_pcie *pci)
+{
+	struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
+	u32 val = rockchip_pcie_readl_apb(rockchip, PCIE_CLIENT_LTSSM_STATUS);
+
+	if ((val & PCIE_LINKUP) == PCIE_LINKUP &&
+	    (val & PCIE_LTSSM_STATUS_MASK) == PCIE_L0S_ENTRY)
+		return 1;
+
+	return 0;
+}
+
+static int rockchip_pcie_start_link(struct dw_pcie *pci)
+{
+	struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
+
+	/* Reset device */
+	gpiod_set_value_cansleep(rockchip->rst_gpio, 0);
+
+	rockchip_pcie_enable_ltssm(rockchip);
+
+	/*
+	 * PCIe requires the refclk to be stable for 100µs prior to releasing
+	 * PERST. See table 2-4 in section 2.6.2 AC Specifications of the PCI
+	 * Express Card Electromechanical Specification, 1.1. However, we don't
+	 * know if the refclk is coming from RC's PHY or external OSC. If it's
+	 * from RC, so enabling LTSSM is the just right place to release #PERST.
+	 * We need more extra time as before, rather than setting just
+	 * 100us as we don't know how long should the device need to reset.
+	 */
+	msleep(100);
+	gpiod_set_value_cansleep(rockchip->rst_gpio, 1);
+
+	return 0;
+}
+
+static int rockchip_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct rockchip_pcie *rockchip = to_rockchip_pcie(pci);
+	u32 val = HIWORD_UPDATE_BIT(PCIE_LTSSM_ENABLE_ENHANCE);
+
+	/* LTSSM enable control mode */
+	rockchip_pcie_writel_apb(rockchip, val, PCIE_CLIENT_HOT_RESET_CTRL);
+
+	rockchip_pcie_writel_apb(rockchip, PCIE_CLIENT_RC_MODE,
+				 PCIE_CLIENT_GENERAL_CONTROL);
+
+	return 0;
+}
+
+static const struct dw_pcie_host_ops rockchip_pcie_host_ops = {
+	.host_init = rockchip_pcie_host_init,
+};
+
+static int rockchip_pcie_clk_init(struct rockchip_pcie *rockchip)
+{
+	struct device *dev = rockchip->pci.dev;
+	int ret;
+
+	ret = devm_clk_bulk_get_all(dev, &rockchip->clks);
+	if (ret < 0)
+		return ret;
+
+	rockchip->clk_cnt = ret;
+
+	return clk_bulk_prepare_enable(rockchip->clk_cnt, rockchip->clks);
+}
+
+static int rockchip_pcie_resource_get(struct platform_device *pdev,
+				      struct rockchip_pcie *rockchip)
+{
+	rockchip->apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+	if (IS_ERR(rockchip->apb_base))
+		return PTR_ERR(rockchip->apb_base);
+
+	rockchip->rst_gpio = devm_gpiod_get_optional(&pdev->dev, "reset",
+						     GPIOD_OUT_HIGH);
+	if (IS_ERR(rockchip->rst_gpio))
+		return PTR_ERR(rockchip->rst_gpio);
+
+	return 0;
+}
+
+static int rockchip_pcie_phy_init(struct rockchip_pcie *rockchip)
+{
+	struct device *dev = rockchip->pci.dev;
+	int ret;
+
+	rockchip->phy = devm_phy_get(dev, "pcie-phy");
+	if (IS_ERR(rockchip->phy))
+		return dev_err_probe(dev, PTR_ERR(rockchip->phy),
+				     "missing PHY\n");
+
+	ret = phy_init(rockchip->phy);
+	if (ret < 0)
+		return ret;
+
+	ret = phy_power_on(rockchip->phy);
+	if (ret)
+		phy_exit(rockchip->phy);
+
+	return ret;
+}
+
+static void rockchip_pcie_phy_deinit(struct rockchip_pcie *rockchip)
+{
+	phy_exit(rockchip->phy);
+	phy_power_off(rockchip->phy);
+}
+
+static int rockchip_pcie_reset_control_release(struct rockchip_pcie *rockchip)
+{
+	struct device *dev = rockchip->pci.dev;
+
+	rockchip->rst = devm_reset_control_array_get_exclusive(dev);
+	if (IS_ERR(rockchip->rst))
+		return dev_err_probe(dev, PTR_ERR(rockchip->rst),
+				     "failed to get reset lines\n");
+
+	return reset_control_deassert(rockchip->rst);
+}
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.link_up = rockchip_pcie_link_up,
+	.start_link = rockchip_pcie_start_link,
+};
+
+static int rockchip_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rockchip_pcie *rockchip;
+	struct pcie_port *pp;
+	int ret;
+
+	rockchip = devm_kzalloc(dev, sizeof(*rockchip), GFP_KERNEL);
+	if (!rockchip)
+		return -ENOMEM;
+
+	platform_set_drvdata(pdev, rockchip);
+
+	rockchip->pci.dev = dev;
+	rockchip->pci.ops = &dw_pcie_ops;
+
+	pp = &rockchip->pci.pp;
+	pp->ops = &rockchip_pcie_host_ops;
+
+	ret = rockchip_pcie_resource_get(pdev, rockchip);
+	if (ret)
+		return ret;
+
+	/* DON'T MOVE ME: must be enable before PHY init */
+	rockchip->vpcie3v3 = devm_regulator_get_optional(dev, "vpcie3v3");
+	if (IS_ERR(rockchip->vpcie3v3)) {
+		if (PTR_ERR(rockchip->vpcie3v3) != -ENODEV)
+			return dev_err_probe(dev, PTR_ERR(rockchip->vpcie3v3),
+					"failed to get vpcie3v3 regulator\n");
+		rockchip->vpcie3v3 = NULL;
+	} else {
+		ret = regulator_enable(rockchip->vpcie3v3);
+		if (ret) {
+			dev_err(dev, "failed to enable vpcie3v3 regulator\n");
+			return ret;
+		}
+	}
+
+	ret = rockchip_pcie_phy_init(rockchip);
+	if (ret)
+		goto disable_regulator;
+
+	ret = rockchip_pcie_reset_control_release(rockchip);
+	if (ret)
+		goto deinit_phy;
+
+	ret = rockchip_pcie_clk_init(rockchip);
+	if (ret)
+		goto deinit_phy;
+
+	ret = dw_pcie_host_init(pp);
+	if (!ret)
+		return 0;
+
+	clk_bulk_disable_unprepare(rockchip->clk_cnt, rockchip->clks);
+deinit_phy:
+	rockchip_pcie_phy_deinit(rockchip);
+disable_regulator:
+	if (rockchip->vpcie3v3)
+		regulator_disable(rockchip->vpcie3v3);
+
+	return ret;
+}
+
+static const struct of_device_id rockchip_pcie_of_match[] = {
+	{ .compatible = "rockchip,rk3568-pcie", },
+	{},
+};
+
+static struct platform_driver rockchip_pcie_driver = {
+	.driver = {
+		.name	= "rockchip-dw-pcie",
+		.of_match_table = rockchip_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe = rockchip_pcie_probe,
+};
+builtin_platform_driver(rockchip_pcie_driver);
diff --git a/drivers/pci/controller/dwc/pcie-keembay.c b/drivers/pci/controller/dwc/pcie-keembay.c
new file mode 100644
index 000000000000..1ac29a6eef22
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-keembay.c
@@ -0,0 +1,460 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * PCIe controller driver for Intel Keem Bay
+ * Copyright (C) 2020 Intel Corporation
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bits.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/gpio/consumer.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/kernel.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+
+#include "pcie-designware.h"
+
+/* PCIE_REGS_APB_SLV Registers */
+#define PCIE_REGS_PCIE_CFG		0x0004
+#define  PCIE_DEVICE_TYPE		BIT(8)
+#define  PCIE_RSTN			BIT(0)
+#define PCIE_REGS_PCIE_APP_CNTRL	0x0008
+#define  APP_LTSSM_ENABLE		BIT(0)
+#define PCIE_REGS_INTERRUPT_ENABLE	0x0028
+#define  MSI_CTRL_INT_EN		BIT(8)
+#define  EDMA_INT_EN			GENMASK(7, 0)
+#define PCIE_REGS_INTERRUPT_STATUS	0x002c
+#define  MSI_CTRL_INT			BIT(8)
+#define PCIE_REGS_PCIE_SII_PM_STATE	0x00b0
+#define  SMLH_LINK_UP			BIT(19)
+#define  RDLH_LINK_UP			BIT(8)
+#define  PCIE_REGS_PCIE_SII_LINK_UP	(SMLH_LINK_UP | RDLH_LINK_UP)
+#define PCIE_REGS_PCIE_PHY_CNTL		0x0164
+#define  PHY0_SRAM_BYPASS		BIT(8)
+#define PCIE_REGS_PCIE_PHY_STAT		0x0168
+#define  PHY0_MPLLA_STATE		BIT(1)
+#define PCIE_REGS_LJPLL_STA		0x016c
+#define  LJPLL_LOCK			BIT(0)
+#define PCIE_REGS_LJPLL_CNTRL_0		0x0170
+#define  LJPLL_EN			BIT(29)
+#define  LJPLL_FOUT_EN			GENMASK(24, 21)
+#define PCIE_REGS_LJPLL_CNTRL_2		0x0178
+#define  LJPLL_REF_DIV			GENMASK(17, 12)
+#define  LJPLL_FB_DIV			GENMASK(11, 0)
+#define PCIE_REGS_LJPLL_CNTRL_3		0x017c
+#define  LJPLL_POST_DIV3A		GENMASK(24, 22)
+#define  LJPLL_POST_DIV2A		GENMASK(18, 16)
+
+#define PERST_DELAY_US		1000
+#define AUX_CLK_RATE_HZ		24000000
+
+struct keembay_pcie {
+	struct dw_pcie		pci;
+	void __iomem		*apb_base;
+	enum dw_pcie_device_mode mode;
+
+	struct clk		*clk_master;
+	struct clk		*clk_aux;
+	struct gpio_desc	*reset;
+};
+
+struct keembay_pcie_of_data {
+	enum dw_pcie_device_mode mode;
+};
+
+static void keembay_ep_reset_assert(struct keembay_pcie *pcie)
+{
+	gpiod_set_value_cansleep(pcie->reset, 1);
+	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
+}
+
+static void keembay_ep_reset_deassert(struct keembay_pcie *pcie)
+{
+	/*
+	 * Ensure that PERST# is asserted for a minimum of 100ms.
+	 *
+	 * For more details, refer to PCI Express Card Electromechanical
+	 * Specification Revision 1.1, Table-2.4.
+	 */
+	msleep(100);
+
+	gpiod_set_value_cansleep(pcie->reset, 0);
+	usleep_range(PERST_DELAY_US, PERST_DELAY_US + 500);
+}
+
+static void keembay_pcie_ltssm_set(struct keembay_pcie *pcie, bool enable)
+{
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_APP_CNTRL);
+	if (enable)
+		val |= APP_LTSSM_ENABLE;
+	else
+		val &= ~APP_LTSSM_ENABLE;
+	writel(val, pcie->apb_base + PCIE_REGS_PCIE_APP_CNTRL);
+}
+
+static int keembay_pcie_link_up(struct dw_pcie *pci)
+{
+	struct keembay_pcie *pcie = dev_get_drvdata(pci->dev);
+	u32 val;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_SII_PM_STATE);
+
+	return (val & PCIE_REGS_PCIE_SII_LINK_UP) == PCIE_REGS_PCIE_SII_LINK_UP;
+}
+
+static int keembay_pcie_start_link(struct dw_pcie *pci)
+{
+	struct keembay_pcie *pcie = dev_get_drvdata(pci->dev);
+	u32 val;
+	int ret;
+
+	if (pcie->mode == DW_PCIE_EP_TYPE)
+		return 0;
+
+	keembay_pcie_ltssm_set(pcie, false);
+
+	ret = readl_poll_timeout(pcie->apb_base + PCIE_REGS_PCIE_PHY_STAT,
+				 val, val & PHY0_MPLLA_STATE, 20,
+				 500 * USEC_PER_MSEC);
+	if (ret) {
+		dev_err(pci->dev, "MPLLA is not locked\n");
+		return ret;
+	}
+
+	keembay_pcie_ltssm_set(pcie, true);
+
+	return 0;
+}
+
+static void keembay_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct keembay_pcie *pcie = dev_get_drvdata(pci->dev);
+
+	keembay_pcie_ltssm_set(pcie, false);
+}
+
+static const struct dw_pcie_ops keembay_pcie_ops = {
+	.link_up	= keembay_pcie_link_up,
+	.start_link	= keembay_pcie_start_link,
+	.stop_link	= keembay_pcie_stop_link,
+};
+
+static inline struct clk *keembay_pcie_probe_clock(struct device *dev,
+						   const char *id, u64 rate)
+{
+	struct clk *clk;
+	int ret;
+
+	clk = devm_clk_get(dev, id);
+	if (IS_ERR(clk))
+		return clk;
+
+	if (rate) {
+		ret = clk_set_rate(clk, rate);
+		if (ret)
+			return ERR_PTR(ret);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret)
+		return ERR_PTR(ret);
+
+	ret = devm_add_action_or_reset(dev,
+				       (void(*)(void *))clk_disable_unprepare,
+				       clk);
+	if (ret)
+		return ERR_PTR(ret);
+
+	return clk;
+}
+
+static int keembay_pcie_probe_clocks(struct keembay_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct device *dev = pci->dev;
+
+	pcie->clk_master = keembay_pcie_probe_clock(dev, "master", 0);
+	if (IS_ERR(pcie->clk_master))
+		return dev_err_probe(dev, PTR_ERR(pcie->clk_master),
+				     "Failed to enable master clock");
+
+	pcie->clk_aux = keembay_pcie_probe_clock(dev, "aux", AUX_CLK_RATE_HZ);
+	if (IS_ERR(pcie->clk_aux))
+		return dev_err_probe(dev, PTR_ERR(pcie->clk_aux),
+				     "Failed to enable auxiliary clock");
+
+	return 0;
+}
+
+/*
+ * Initialize the internal PCIe PLL in Host mode.
+ * See the following sections in Keem Bay data book,
+ * (1) 6.4.6.1 PCIe Subsystem Example Initialization,
+ * (2) 6.8 PCIe Low Jitter PLL for Ref Clk Generation.
+ */
+static int keembay_pcie_pll_init(struct keembay_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	u32 val;
+	int ret;
+
+	val = FIELD_PREP(LJPLL_REF_DIV, 0) | FIELD_PREP(LJPLL_FB_DIV, 0x32);
+	writel(val, pcie->apb_base + PCIE_REGS_LJPLL_CNTRL_2);
+
+	val = FIELD_PREP(LJPLL_POST_DIV3A, 0x2) |
+		FIELD_PREP(LJPLL_POST_DIV2A, 0x2);
+	writel(val, pcie->apb_base + PCIE_REGS_LJPLL_CNTRL_3);
+
+	val = FIELD_PREP(LJPLL_EN, 0x1) | FIELD_PREP(LJPLL_FOUT_EN, 0xc);
+	writel(val, pcie->apb_base + PCIE_REGS_LJPLL_CNTRL_0);
+
+	ret = readl_poll_timeout(pcie->apb_base + PCIE_REGS_LJPLL_STA,
+				 val, val & LJPLL_LOCK, 20,
+				 500 * USEC_PER_MSEC);
+	if (ret)
+		dev_err(pci->dev, "Low jitter PLL is not locked\n");
+
+	return ret;
+}
+
+static void keembay_pcie_msi_irq_handler(struct irq_desc *desc)
+{
+	struct keembay_pcie *pcie = irq_desc_get_handler_data(desc);
+	struct irq_chip *chip = irq_desc_get_chip(desc);
+	u32 val, mask, status;
+	struct pcie_port *pp;
+
+	/*
+	 * Keem Bay PCIe Controller provides an additional IP logic on top of
+	 * standard DWC IP to clear MSI IRQ by writing '1' to the respective
+	 * bit of the status register.
+	 *
+	 * So, a chained irq handler is defined to handle this additional
+	 * IP logic.
+	 */
+
+	chained_irq_enter(chip, desc);
+
+	pp = &pcie->pci.pp;
+	val = readl(pcie->apb_base + PCIE_REGS_INTERRUPT_STATUS);
+	mask = readl(pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+
+	status = val & mask;
+
+	if (status & MSI_CTRL_INT) {
+		dw_handle_msi_irq(pp);
+		writel(status, pcie->apb_base + PCIE_REGS_INTERRUPT_STATUS);
+	}
+
+	chained_irq_exit(chip, desc);
+}
+
+static int keembay_pcie_setup_msi_irq(struct keembay_pcie *pcie)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct device *dev = pci->dev;
+	struct platform_device *pdev = to_platform_device(dev);
+	int irq;
+
+	irq = platform_get_irq_byname(pdev, "pcie");
+	if (irq < 0)
+		return irq;
+
+	irq_set_chained_handler_and_data(irq, keembay_pcie_msi_irq_handler,
+					 pcie);
+
+	return 0;
+}
+
+static void keembay_pcie_ep_init(struct dw_pcie_ep *ep)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+	struct keembay_pcie *pcie = dev_get_drvdata(pci->dev);
+
+	writel(EDMA_INT_EN, pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+}
+
+static int keembay_pcie_ep_raise_irq(struct dw_pcie_ep *ep, u8 func_no,
+				     enum pci_epc_irq_type type,
+				     u16 interrupt_num)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
+
+	switch (type) {
+	case PCI_EPC_IRQ_LEGACY:
+		/* Legacy interrupts are not supported in Keem Bay */
+		dev_err(pci->dev, "Legacy IRQ is not supported\n");
+		return -EINVAL;
+	case PCI_EPC_IRQ_MSI:
+		return dw_pcie_ep_raise_msi_irq(ep, func_no, interrupt_num);
+	case PCI_EPC_IRQ_MSIX:
+		return dw_pcie_ep_raise_msix_irq(ep, func_no, interrupt_num);
+	default:
+		dev_err(pci->dev, "Unknown IRQ type %d\n", type);
+		return -EINVAL;
+	}
+}
+
+static const struct pci_epc_features keembay_pcie_epc_features = {
+	.linkup_notifier	= false,
+	.msi_capable		= true,
+	.msix_capable		= true,
+	.reserved_bar		= BIT(BAR_1) | BIT(BAR_3) | BIT(BAR_5),
+	.bar_fixed_64bit	= BIT(BAR_0) | BIT(BAR_2) | BIT(BAR_4),
+	.align			= SZ_16K,
+};
+
+static const struct pci_epc_features *
+keembay_pcie_get_features(struct dw_pcie_ep *ep)
+{
+	return &keembay_pcie_epc_features;
+}
+
+static const struct dw_pcie_ep_ops keembay_pcie_ep_ops = {
+	.ep_init	= keembay_pcie_ep_init,
+	.raise_irq	= keembay_pcie_ep_raise_irq,
+	.get_features	= keembay_pcie_get_features,
+};
+
+static const struct dw_pcie_host_ops keembay_pcie_host_ops = {
+};
+
+static int keembay_pcie_add_pcie_port(struct keembay_pcie *pcie,
+				      struct platform_device *pdev)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct pcie_port *pp = &pci->pp;
+	struct device *dev = &pdev->dev;
+	u32 val;
+	int ret;
+
+	pp->ops = &keembay_pcie_host_ops;
+	pp->msi_irq = -ENODEV;
+
+	ret = keembay_pcie_setup_msi_irq(pcie);
+	if (ret)
+		return ret;
+
+	pcie->reset = devm_gpiod_get(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(pcie->reset))
+		return PTR_ERR(pcie->reset);
+
+	ret = keembay_pcie_probe_clocks(pcie);
+	if (ret)
+		return ret;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_PHY_CNTL);
+	val |= PHY0_SRAM_BYPASS;
+	writel(val, pcie->apb_base + PCIE_REGS_PCIE_PHY_CNTL);
+
+	writel(PCIE_DEVICE_TYPE, pcie->apb_base + PCIE_REGS_PCIE_CFG);
+
+	ret = keembay_pcie_pll_init(pcie);
+	if (ret)
+		return ret;
+
+	val = readl(pcie->apb_base + PCIE_REGS_PCIE_CFG);
+	writel(val | PCIE_RSTN, pcie->apb_base + PCIE_REGS_PCIE_CFG);
+	keembay_ep_reset_deassert(pcie);
+
+	ret = dw_pcie_host_init(pp);
+	if (ret) {
+		keembay_ep_reset_assert(pcie);
+		dev_err(dev, "Failed to initialize host: %d\n", ret);
+		return ret;
+	}
+
+	val = readl(pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+	if (IS_ENABLED(CONFIG_PCI_MSI))
+		val |= MSI_CTRL_INT_EN;
+	writel(val, pcie->apb_base + PCIE_REGS_INTERRUPT_ENABLE);
+
+	return 0;
+}
+
+static int keembay_pcie_probe(struct platform_device *pdev)
+{
+	const struct keembay_pcie_of_data *data;
+	struct device *dev = &pdev->dev;
+	struct keembay_pcie *pcie;
+	struct dw_pcie *pci;
+	enum dw_pcie_device_mode mode;
+
+	data = device_get_match_data(dev);
+	if (!data)
+		return -ENODEV;
+
+	mode = (enum dw_pcie_device_mode)data->mode;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pci = &pcie->pci;
+	pci->dev = dev;
+	pci->ops = &keembay_pcie_ops;
+
+	pcie->mode = mode;
+
+	pcie->apb_base = devm_platform_ioremap_resource_byname(pdev, "apb");
+	if (IS_ERR(pcie->apb_base))
+		return PTR_ERR(pcie->apb_base);
+
+	platform_set_drvdata(pdev, pcie);
+
+	switch (pcie->mode) {
+	case DW_PCIE_RC_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_KEEMBAY_HOST))
+			return -ENODEV;
+
+		return keembay_pcie_add_pcie_port(pcie, pdev);
+	case DW_PCIE_EP_TYPE:
+		if (!IS_ENABLED(CONFIG_PCIE_KEEMBAY_EP))
+			return -ENODEV;
+
+		pci->ep.ops = &keembay_pcie_ep_ops;
+		return dw_pcie_ep_init(&pci->ep);
+	default:
+		dev_err(dev, "Invalid device type %d\n", pcie->mode);
+		return -ENODEV;
+	}
+}
+
+static const struct keembay_pcie_of_data keembay_pcie_rc_of_data = {
+	.mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct keembay_pcie_of_data keembay_pcie_ep_of_data = {
+	.mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct of_device_id keembay_pcie_of_match[] = {
+	{
+		.compatible = "intel,keembay-pcie",
+		.data = &keembay_pcie_rc_of_data,
+	},
+	{
+		.compatible = "intel,keembay-pcie-ep",
+		.data = &keembay_pcie_ep_of_data,
+	},
+	{}
+};
+
+static struct platform_driver keembay_pcie_driver = {
+	.driver = {
+		.name = "keembay-pcie",
+		.of_match_table = keembay_pcie_of_match,
+		.suppress_bind_attrs = true,
+	},
+	.probe  = keembay_pcie_probe,
+};
+builtin_platform_driver(keembay_pcie_driver);
diff --git a/drivers/pci/controller/dwc/pcie-tegra194.c b/drivers/pci/controller/dwc/pcie-tegra194.c
index 3ec7b29d5dc7..904976913081 100644
--- a/drivers/pci/controller/dwc/pcie-tegra194.c
+++ b/drivers/pci/controller/dwc/pcie-tegra194.c
@@ -497,19 +497,19 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 	struct tegra_pcie_dw *pcie = arg;
 	struct dw_pcie_ep *ep = &pcie->pci.ep;
 	int spurious = 1;
-	u32 val, tmp;
+	u32 status_l0, status_l1, link_status;
 
-	val = appl_readl(pcie, APPL_INTR_STATUS_L0);
-	if (val & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
-		val = appl_readl(pcie, APPL_INTR_STATUS_L1_0_0);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L1_0_0);
+	status_l0 = appl_readl(pcie, APPL_INTR_STATUS_L0);
+	if (status_l0 & APPL_INTR_STATUS_L0_LINK_STATE_INT) {
+		status_l1 = appl_readl(pcie, APPL_INTR_STATUS_L1_0_0);
+		appl_writel(pcie, status_l1, APPL_INTR_STATUS_L1_0_0);
 
-		if (val & APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE)
+		if (status_l1 & APPL_INTR_STATUS_L1_0_0_HOT_RESET_DONE)
 			pex_ep_event_hot_rst_done(pcie);
 
-		if (val & APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED) {
-			tmp = appl_readl(pcie, APPL_LINK_STATUS);
-			if (tmp & APPL_LINK_STATUS_RDLH_LINK_UP) {
+		if (status_l1 & APPL_INTR_STATUS_L1_0_0_RDLH_LINK_UP_CHGED) {
+			link_status = appl_readl(pcie, APPL_LINK_STATUS);
+			if (link_status & APPL_LINK_STATUS_RDLH_LINK_UP) {
 				dev_dbg(pcie->dev, "Link is up with Host\n");
 				dw_pcie_ep_linkup(ep);
 			}
@@ -518,11 +518,11 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 		spurious = 0;
 	}
 
-	if (val & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT) {
-		val = appl_readl(pcie, APPL_INTR_STATUS_L1_15);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L1_15);
+	if (status_l0 & APPL_INTR_STATUS_L0_PCI_CMD_EN_INT) {
+		status_l1 = appl_readl(pcie, APPL_INTR_STATUS_L1_15);
+		appl_writel(pcie, status_l1, APPL_INTR_STATUS_L1_15);
 
-		if (val & APPL_INTR_STATUS_L1_15_CFG_BME_CHGED)
+		if (status_l1 & APPL_INTR_STATUS_L1_15_CFG_BME_CHGED)
 			return IRQ_WAKE_THREAD;
 
 		spurious = 0;
@@ -530,8 +530,8 @@ static irqreturn_t tegra_pcie_ep_hard_irq(int irq, void *arg)
 
 	if (spurious) {
 		dev_warn(pcie->dev, "Random interrupt (STATUS = 0x%08X)\n",
-			 val);
-		appl_writel(pcie, val, APPL_INTR_STATUS_L0);
+			 status_l0);
+		appl_writel(pcie, status_l0, APPL_INTR_STATUS_L0);
 	}
 
 	return IRQ_HANDLED;
@@ -1493,6 +1493,16 @@ static void tegra_pcie_dw_pme_turnoff(struct tegra_pcie_dw *pcie)
 		return;
 	}
 
+	/*
+	 * PCIe controller exits from L2 only if reset is applied, so
+	 * controller doesn't handle interrupts. But in cases where
+	 * L2 entry fails, PERST# is asserted which can trigger surprise
+	 * link down AER. However this function call happens in
+	 * suspend_noirq(), so AER interrupt will not be processed.
+	 * Disable all interrupts to avoid such a scenario.
+	 */
+	appl_writel(pcie, 0x0, APPL_INTR_EN_L0_0);
+
 	if (tegra_pcie_try_link_l2(pcie)) {
 		dev_info(pcie->dev, "Link didn't transition to L2 state\n");
 		/*
@@ -1763,7 +1773,7 @@ static void pex_ep_event_pex_rst_deassert(struct tegra_pcie_dw *pcie)
 	val = (ep->msi_mem_phys & MSIX_ADDR_MATCH_LOW_OFF_MASK);
 	val |= MSIX_ADDR_MATCH_LOW_OFF_EN;
 	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_LOW_OFF, val);
-	val = (lower_32_bits(ep->msi_mem_phys) & MSIX_ADDR_MATCH_HIGH_OFF_MASK);
+	val = (upper_32_bits(ep->msi_mem_phys) & MSIX_ADDR_MATCH_HIGH_OFF_MASK);
 	dw_pcie_writel_dbi(pci, MSIX_ADDR_MATCH_HIGH_OFF, val);
 
 	ret = dw_pcie_ep_init_complete(ep);
@@ -1935,13 +1945,6 @@ static int tegra_pcie_config_ep(struct tegra_pcie_dw *pcie,
 		return ret;
 	}
 
-	name = devm_kasprintf(dev, GFP_KERNEL, "tegra_pcie_%u_ep_work",
-			      pcie->cid);
-	if (!name) {
-		dev_err(dev, "Failed to create PCIe EP work thread string\n");
-		return -ENOMEM;
-	}
-
 	pm_runtime_enable(dev);
 
 	ret = dw_pcie_ep_init(ep);
@@ -2236,6 +2239,11 @@ static int tegra_pcie_dw_resume_early(struct device *dev)
 	struct tegra_pcie_dw *pcie = dev_get_drvdata(dev);
 	u32 val;
 
+	if (pcie->mode == DW_PCIE_EP_TYPE) {
+		dev_err(dev, "Suspend is not supported in EP mode");
+		return -ENOTSUPP;
+	}
+
 	if (!pcie->link_state)
 		return 0;
 
diff --git a/drivers/pci/controller/dwc/pcie-uniphier.c b/drivers/pci/controller/dwc/pcie-uniphier.c
index 7e8bad326770..d842fd018129 100644
--- a/drivers/pci/controller/dwc/pcie-uniphier.c
+++ b/drivers/pci/controller/dwc/pcie-uniphier.c
@@ -235,7 +235,7 @@ static void uniphier_pcie_irq_handler(struct irq_desc *desc)
 	struct uniphier_pcie_priv *priv = to_uniphier_pcie(pci);
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	unsigned long reg;
-	u32 val, bit, virq;
+	u32 val, bit;
 
 	/* INT for debug */
 	val = readl(priv->base + PCL_RCV_INT);
@@ -257,10 +257,8 @@ static void uniphier_pcie_irq_handler(struct irq_desc *desc)
 	val = readl(priv->base + PCL_RCV_INTX);
 	reg = FIELD_GET(PCL_RCV_INTX_ALL_STATUS, val);
 
-	for_each_set_bit(bit, &reg, PCI_NUM_INTX) {
-		virq = irq_linear_revmap(priv->legacy_irq_domain, bit);
-		generic_handle_irq(virq);
-	}
+	for_each_set_bit(bit, &reg, PCI_NUM_INTX)
+		generic_handle_domain_irq(priv->legacy_irq_domain, bit);
 
 	chained_irq_exit(chip, desc);
 }
diff --git a/drivers/pci/controller/dwc/pcie-visconti.c b/drivers/pci/controller/dwc/pcie-visconti.c
new file mode 100644
index 000000000000..a88eab6829bb
--- /dev/null
+++ b/drivers/pci/controller/dwc/pcie-visconti.c
@@ -0,0 +1,332 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DWC PCIe RC driver for Toshiba Visconti ARM SoC
+ *
+ * Copyright (C) 2021 Toshiba Electronic Device & Storage Corporation
+ * Copyright (C) 2021 TOSHIBA CORPORATION
+ *
+ * Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
+#include <linux/of_platform.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/resource.h>
+#include <linux/types.h>
+
+#include "pcie-designware.h"
+#include "../../pci.h"
+
+struct visconti_pcie {
+	struct dw_pcie pci;
+	void __iomem *ulreg_base;
+	void __iomem *smu_base;
+	void __iomem *mpu_base;
+	struct clk *refclk;
+	struct clk *coreclk;
+	struct clk *auxclk;
+};
+
+#define PCIE_UL_REG_S_PCIE_MODE		0x00F4
+#define  PCIE_UL_REG_S_PCIE_MODE_EP	0x00
+#define  PCIE_UL_REG_S_PCIE_MODE_RC	0x04
+
+#define PCIE_UL_REG_S_PERSTN_CTRL	0x00F8
+#define  PCIE_UL_IOM_PCIE_PERSTN_I_EN	BIT(3)
+#define  PCIE_UL_DIRECT_PERSTN_EN	BIT(2)
+#define  PCIE_UL_PERSTN_OUT		BIT(1)
+#define  PCIE_UL_DIRECT_PERSTN		BIT(0)
+#define  PCIE_UL_REG_S_PERSTN_CTRL_INIT	(PCIE_UL_IOM_PCIE_PERSTN_I_EN | \
+					 PCIE_UL_DIRECT_PERSTN_EN | \
+					 PCIE_UL_DIRECT_PERSTN)
+
+#define PCIE_UL_REG_S_PHY_INIT_02	0x0104
+#define  PCIE_UL_PHY0_SRAM_EXT_LD_DONE	BIT(0)
+
+#define PCIE_UL_REG_S_PHY_INIT_03	0x0108
+#define  PCIE_UL_PHY0_SRAM_INIT_DONE	BIT(0)
+
+#define PCIE_UL_REG_S_INT_EVENT_MASK1	0x0138
+#define  PCIE_UL_CFG_PME_INT		BIT(0)
+#define  PCIE_UL_CFG_LINK_EQ_REQ_INT	BIT(1)
+#define  PCIE_UL_EDMA_INT0		BIT(2)
+#define  PCIE_UL_EDMA_INT1		BIT(3)
+#define  PCIE_UL_EDMA_INT2		BIT(4)
+#define  PCIE_UL_EDMA_INT3		BIT(5)
+#define  PCIE_UL_S_INT_EVENT_MASK1_ALL  (PCIE_UL_CFG_PME_INT | \
+					 PCIE_UL_CFG_LINK_EQ_REQ_INT | \
+					 PCIE_UL_EDMA_INT0 | \
+					 PCIE_UL_EDMA_INT1 | \
+					 PCIE_UL_EDMA_INT2 | \
+					 PCIE_UL_EDMA_INT3)
+
+#define PCIE_UL_REG_S_SB_MON		0x0198
+#define PCIE_UL_REG_S_SIG_MON		0x019C
+#define  PCIE_UL_CORE_RST_N_MON		BIT(0)
+
+#define PCIE_UL_REG_V_SII_DBG_00	0x0844
+#define PCIE_UL_REG_V_SII_GEN_CTRL_01	0x0860
+#define  PCIE_UL_APP_LTSSM_ENABLE	BIT(0)
+
+#define PCIE_UL_REG_V_PHY_ST_00		0x0864
+#define  PCIE_UL_SMLH_LINK_UP		BIT(0)
+
+#define PCIE_UL_REG_V_PHY_ST_02		0x0868
+#define  PCIE_UL_S_DETECT_ACT		0x01
+#define  PCIE_UL_S_L0			0x11
+
+#define PISMU_CKON_PCIE			0x0038
+#define  PISMU_CKON_PCIE_AUX_CLK	BIT(1)
+#define  PISMU_CKON_PCIE_MSTR_ACLK	BIT(0)
+
+#define PISMU_RSOFF_PCIE		0x0538
+#define  PISMU_RSOFF_PCIE_ULREG_RST_N	BIT(1)
+#define  PISMU_RSOFF_PCIE_PWR_UP_RST_N	BIT(0)
+
+#define PCIE_MPU_REG_MP_EN		0x0
+#define  MPU_MP_EN_DISABLE		BIT(0)
+
+/* Access registers in PCIe ulreg */
+static void visconti_ulreg_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
+{
+	writel_relaxed(val, pcie->ulreg_base + reg);
+}
+
+static u32 visconti_ulreg_readl(struct visconti_pcie *pcie, u32 reg)
+{
+	return readl_relaxed(pcie->ulreg_base + reg);
+}
+
+/* Access registers in PCIe smu */
+static void visconti_smu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
+{
+	writel_relaxed(val, pcie->smu_base + reg);
+}
+
+/* Access registers in PCIe mpu */
+static void visconti_mpu_writel(struct visconti_pcie *pcie, u32 val, u32 reg)
+{
+	writel_relaxed(val, pcie->mpu_base + reg);
+}
+
+static u32 visconti_mpu_readl(struct visconti_pcie *pcie, u32 reg)
+{
+	return readl_relaxed(pcie->mpu_base + reg);
+}
+
+static int visconti_pcie_link_up(struct dw_pcie *pci)
+{
+	struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
+	void __iomem *addr = pcie->ulreg_base;
+	u32 val = readl_relaxed(addr + PCIE_UL_REG_V_PHY_ST_02);
+
+	return !!(val & PCIE_UL_S_L0);
+}
+
+static int visconti_pcie_start_link(struct dw_pcie *pci)
+{
+	struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
+	void __iomem *addr = pcie->ulreg_base;
+	u32 val;
+	int ret;
+
+	visconti_ulreg_writel(pcie, PCIE_UL_APP_LTSSM_ENABLE,
+			      PCIE_UL_REG_V_SII_GEN_CTRL_01);
+
+	ret = readl_relaxed_poll_timeout(addr + PCIE_UL_REG_V_PHY_ST_02,
+					 val, (val & PCIE_UL_S_L0),
+					 90000, 100000);
+	if (ret)
+		return ret;
+
+	visconti_ulreg_writel(pcie, PCIE_UL_S_INT_EVENT_MASK1_ALL,
+			      PCIE_UL_REG_S_INT_EVENT_MASK1);
+
+	if (dw_pcie_link_up(pci)) {
+		val = visconti_mpu_readl(pcie, PCIE_MPU_REG_MP_EN);
+		visconti_mpu_writel(pcie, val & ~MPU_MP_EN_DISABLE,
+				    PCIE_MPU_REG_MP_EN);
+	}
+
+	return 0;
+}
+
+static void visconti_pcie_stop_link(struct dw_pcie *pci)
+{
+	struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
+	u32 val;
+
+	val = visconti_ulreg_readl(pcie, PCIE_UL_REG_V_SII_GEN_CTRL_01);
+	val &= ~PCIE_UL_APP_LTSSM_ENABLE;
+	visconti_ulreg_writel(pcie, val, PCIE_UL_REG_V_SII_GEN_CTRL_01);
+
+	val = visconti_mpu_readl(pcie, PCIE_MPU_REG_MP_EN);
+	visconti_mpu_writel(pcie, val | MPU_MP_EN_DISABLE, PCIE_MPU_REG_MP_EN);
+}
+
+/*
+ * In this SoC specification, the CPU bus outputs the offset value from
+ * 0x40000000 to the PCIe bus, so 0x40000000 is subtracted from the CPU
+ * bus address. This 0x40000000 is also based on io_base from DT.
+ */
+static u64 visconti_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 cpu_addr)
+{
+	struct pcie_port *pp = &pci->pp;
+
+	return cpu_addr & ~pp->io_base;
+}
+
+static const struct dw_pcie_ops dw_pcie_ops = {
+	.cpu_addr_fixup = visconti_pcie_cpu_addr_fixup,
+	.link_up = visconti_pcie_link_up,
+	.start_link = visconti_pcie_start_link,
+	.stop_link = visconti_pcie_stop_link,
+};
+
+static int visconti_pcie_host_init(struct pcie_port *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct visconti_pcie *pcie = dev_get_drvdata(pci->dev);
+	void __iomem *addr;
+	int err;
+	u32 val;
+
+	visconti_smu_writel(pcie,
+			    PISMU_CKON_PCIE_AUX_CLK | PISMU_CKON_PCIE_MSTR_ACLK,
+			    PISMU_CKON_PCIE);
+	ndelay(250);
+
+	visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_ULREG_RST_N,
+			    PISMU_RSOFF_PCIE);
+	visconti_ulreg_writel(pcie, PCIE_UL_REG_S_PCIE_MODE_RC,
+			      PCIE_UL_REG_S_PCIE_MODE);
+
+	val = PCIE_UL_REG_S_PERSTN_CTRL_INIT;
+	visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
+	udelay(100);
+
+	val |= PCIE_UL_PERSTN_OUT;
+	visconti_ulreg_writel(pcie, val, PCIE_UL_REG_S_PERSTN_CTRL);
+	udelay(100);
+
+	visconti_smu_writel(pcie, PISMU_RSOFF_PCIE_PWR_UP_RST_N,
+			    PISMU_RSOFF_PCIE);
+
+	addr = pcie->ulreg_base + PCIE_UL_REG_S_PHY_INIT_03;
+	err = readl_relaxed_poll_timeout(addr, val,
+					 (val & PCIE_UL_PHY0_SRAM_INIT_DONE),
+					 100, 1000);
+	if (err)
+		return err;
+
+	visconti_ulreg_writel(pcie, PCIE_UL_PHY0_SRAM_EXT_LD_DONE,
+			      PCIE_UL_REG_S_PHY_INIT_02);
+
+	addr = pcie->ulreg_base + PCIE_UL_REG_S_SIG_MON;
+	return readl_relaxed_poll_timeout(addr, val,
+					  (val & PCIE_UL_CORE_RST_N_MON), 100,
+					  1000);
+}
+
+static const struct dw_pcie_host_ops visconti_pcie_host_ops = {
+	.host_init = visconti_pcie_host_init,
+};
+
+static int visconti_get_resources(struct platform_device *pdev,
+				  struct visconti_pcie *pcie)
+{
+	struct device *dev = &pdev->dev;
+
+	pcie->ulreg_base = devm_platform_ioremap_resource_byname(pdev, "ulreg");
+	if (IS_ERR(pcie->ulreg_base))
+		return PTR_ERR(pcie->ulreg_base);
+
+	pcie->smu_base = devm_platform_ioremap_resource_byname(pdev, "smu");
+	if (IS_ERR(pcie->smu_base))
+		return PTR_ERR(pcie->smu_base);
+
+	pcie->mpu_base = devm_platform_ioremap_resource_byname(pdev, "mpu");
+	if (IS_ERR(pcie->mpu_base))
+		return PTR_ERR(pcie->mpu_base);
+
+	pcie->refclk = devm_clk_get(dev, "ref");
+	if (IS_ERR(pcie->refclk))
+		return dev_err_probe(dev, PTR_ERR(pcie->refclk),
+				     "Failed to get ref clock\n");
+
+	pcie->coreclk = devm_clk_get(dev, "core");
+	if (IS_ERR(pcie->coreclk))
+		return dev_err_probe(dev, PTR_ERR(pcie->coreclk),
+				     "Failed to get core clock\n");
+
+	pcie->auxclk = devm_clk_get(dev, "aux");
+	if (IS_ERR(pcie->auxclk))
+		return dev_err_probe(dev, PTR_ERR(pcie->auxclk),
+				     "Failed to get aux clock\n");
+
+	return 0;
+}
+
+static int visconti_add_pcie_port(struct visconti_pcie *pcie,
+				  struct platform_device *pdev)
+{
+	struct dw_pcie *pci = &pcie->pci;
+	struct pcie_port *pp = &pci->pp;
+	struct device *dev = &pdev->dev;
+
+	pp->irq = platform_get_irq_byname(pdev, "intr");
+	if (pp->irq < 0) {
+		dev_err(dev, "Interrupt intr is missing");
+		return pp->irq;
+	}
+
+	pp->ops = &visconti_pcie_host_ops;
+
+	return dw_pcie_host_init(pp);
+}
+
+static int visconti_pcie_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct visconti_pcie *pcie;
+	struct dw_pcie *pci;
+	int ret;
+
+	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
+	if (!pcie)
+		return -ENOMEM;
+
+	pci = &pcie->pci;
+	pci->dev = dev;
+	pci->ops = &dw_pcie_ops;
+
+	ret = visconti_get_resources(pdev, pcie);
+	if (ret)
+		return ret;
+
+	platform_set_drvdata(pdev, pcie);
+
+	return visconti_add_pcie_port(pcie, pdev);
+}
+
+static const struct of_device_id visconti_pcie_match[] = {
+	{ .compatible = "toshiba,visconti-pcie" },
+	{},
+};
+
+static struct platform_driver visconti_pcie_driver = {
+	.probe = visconti_pcie_probe,
+	.driver = {
+		.name = "visconti-pcie",
+		.of_match_table = visconti_pcie_match,
+		.suppress_bind_attrs = true,
+	},
+};
+builtin_platform_driver(visconti_pcie_driver);
diff --git a/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
index c637de3a389b..f3547aa60140 100644
--- a/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
+++ b/drivers/pci/controller/mobiveil/pcie-mobiveil-host.c
@@ -92,7 +92,7 @@ static void mobiveil_pcie_isr(struct irq_desc *desc)
 	u32 msi_data, msi_addr_lo, msi_addr_hi;
 	u32 intr_status, msi_status;
 	unsigned long shifted_status;
-	u32 bit, virq, val, mask;
+	u32 bit, val, mask;
 
 	/*
 	 * The core provides a single interrupt for both INTx/MSI messages.
@@ -114,11 +114,10 @@ static void mobiveil_pcie_isr(struct irq_desc *desc)
 		shifted_status >>= PAB_INTX_START;
 		do {
 			for_each_set_bit(bit, &shifted_status, PCI_NUM_INTX) {
-				virq = irq_find_mapping(rp->intx_domain,
-							bit + 1);
-				if (virq)
-					generic_handle_irq(virq);
-				else
+				int ret;
+				ret = generic_handle_domain_irq(rp->intx_domain,
+								bit + 1);
+				if (ret)
 					dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n",
 							    bit);
 
@@ -155,9 +154,7 @@ static void mobiveil_pcie_isr(struct irq_desc *desc)
 		dev_dbg(dev, "MSI registers, data: %08x, addr: %08x:%08x\n",
 			msi_data, msi_addr_hi, msi_addr_lo);
 
-		virq = irq_find_mapping(msi->dev_domain, msi_data);
-		if (virq)
-			generic_handle_irq(virq);
+		generic_handle_domain_irq(msi->dev_domain, msi_data);
 
 		msi_status = readl_relaxed(pcie->apb_csr_base +
 					   MSI_STATUS_OFFSET);
diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index c95ebe808f92..596ebcfcc82d 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -58,6 +58,7 @@
 #define   PIO_COMPLETION_STATUS_CRS		2
 #define   PIO_COMPLETION_STATUS_CA		4
 #define   PIO_NON_POSTED_REQ			BIT(10)
+#define   PIO_ERR_STATUS			BIT(11)
 #define PIO_ADDR_LS				(PIO_BASE_ADDR + 0x8)
 #define PIO_ADDR_MS				(PIO_BASE_ADDR + 0xc)
 #define PIO_WR_DATA				(PIO_BASE_ADDR + 0x10)
@@ -118,6 +119,46 @@
 #define PCIE_MSI_MASK_REG			(CONTROL_BASE_ADDR + 0x5C)
 #define PCIE_MSI_PAYLOAD_REG			(CONTROL_BASE_ADDR + 0x9C)
 
+/* PCIe window configuration */
+#define OB_WIN_BASE_ADDR			0x4c00
+#define OB_WIN_BLOCK_SIZE			0x20
+#define OB_WIN_COUNT				8
+#define OB_WIN_REG_ADDR(win, offset)		(OB_WIN_BASE_ADDR + \
+						 OB_WIN_BLOCK_SIZE * (win) + \
+						 (offset))
+#define OB_WIN_MATCH_LS(win)			OB_WIN_REG_ADDR(win, 0x00)
+#define     OB_WIN_ENABLE			BIT(0)
+#define OB_WIN_MATCH_MS(win)			OB_WIN_REG_ADDR(win, 0x04)
+#define OB_WIN_REMAP_LS(win)			OB_WIN_REG_ADDR(win, 0x08)
+#define OB_WIN_REMAP_MS(win)			OB_WIN_REG_ADDR(win, 0x0c)
+#define OB_WIN_MASK_LS(win)			OB_WIN_REG_ADDR(win, 0x10)
+#define OB_WIN_MASK_MS(win)			OB_WIN_REG_ADDR(win, 0x14)
+#define OB_WIN_ACTIONS(win)			OB_WIN_REG_ADDR(win, 0x18)
+#define OB_WIN_DEFAULT_ACTIONS			(OB_WIN_ACTIONS(OB_WIN_COUNT-1) + 0x4)
+#define     OB_WIN_FUNC_NUM_MASK		GENMASK(31, 24)
+#define     OB_WIN_FUNC_NUM_SHIFT		24
+#define     OB_WIN_FUNC_NUM_ENABLE		BIT(23)
+#define     OB_WIN_BUS_NUM_BITS_MASK		GENMASK(22, 20)
+#define     OB_WIN_BUS_NUM_BITS_SHIFT		20
+#define     OB_WIN_MSG_CODE_ENABLE		BIT(22)
+#define     OB_WIN_MSG_CODE_MASK		GENMASK(21, 14)
+#define     OB_WIN_MSG_CODE_SHIFT		14
+#define     OB_WIN_MSG_PAYLOAD_LEN		BIT(12)
+#define     OB_WIN_ATTR_ENABLE			BIT(11)
+#define     OB_WIN_ATTR_TC_MASK			GENMASK(10, 8)
+#define     OB_WIN_ATTR_TC_SHIFT		8
+#define     OB_WIN_ATTR_RELAXED			BIT(7)
+#define     OB_WIN_ATTR_NOSNOOP			BIT(6)
+#define     OB_WIN_ATTR_POISON			BIT(5)
+#define     OB_WIN_ATTR_IDO			BIT(4)
+#define     OB_WIN_TYPE_MASK			GENMASK(3, 0)
+#define     OB_WIN_TYPE_SHIFT			0
+#define     OB_WIN_TYPE_MEM			0x0
+#define     OB_WIN_TYPE_IO			0x4
+#define     OB_WIN_TYPE_CONFIG_TYPE0		0x8
+#define     OB_WIN_TYPE_CONFIG_TYPE1		0x9
+#define     OB_WIN_TYPE_MSG			0xc
+
 /* LMI registers base address and register offsets */
 #define LMI_BASE_ADDR				0x6000
 #define CFG_REG					(LMI_BASE_ADDR + 0x0)
@@ -166,7 +207,7 @@
 #define PCIE_CONFIG_WR_TYPE0			0xa
 #define PCIE_CONFIG_WR_TYPE1			0xb
 
-#define PIO_RETRY_CNT			500
+#define PIO_RETRY_CNT			750000 /* 1.5 s */
 #define PIO_RETRY_DELAY			2 /* 2 us*/
 
 #define LINK_WAIT_MAX_RETRIES		10
@@ -177,11 +218,21 @@
 
 #define MSI_IRQ_NUM			32
 
+#define CFG_RD_CRS_VAL			0xffff0001
+
 struct advk_pcie {
 	struct platform_device *pdev;
 	void __iomem *base;
+	struct {
+		phys_addr_t match;
+		phys_addr_t remap;
+		phys_addr_t mask;
+		u32 actions;
+	} wins[OB_WIN_COUNT];
+	u8 wins_count;
 	struct irq_domain *irq_domain;
 	struct irq_chip irq_chip;
+	raw_spinlock_t irq_lock;
 	struct irq_domain *msi_domain;
 	struct irq_domain *msi_inner_domain;
 	struct irq_chip msi_bottom_irq_chip;
@@ -366,9 +417,39 @@ err:
 	dev_err(dev, "link never came up\n");
 }
 
+/*
+ * Set PCIe address window register which could be used for memory
+ * mapping.
+ */
+static void advk_pcie_set_ob_win(struct advk_pcie *pcie, u8 win_num,
+				 phys_addr_t match, phys_addr_t remap,
+				 phys_addr_t mask, u32 actions)
+{
+	advk_writel(pcie, OB_WIN_ENABLE |
+			  lower_32_bits(match), OB_WIN_MATCH_LS(win_num));
+	advk_writel(pcie, upper_32_bits(match), OB_WIN_MATCH_MS(win_num));
+	advk_writel(pcie, lower_32_bits(remap), OB_WIN_REMAP_LS(win_num));
+	advk_writel(pcie, upper_32_bits(remap), OB_WIN_REMAP_MS(win_num));
+	advk_writel(pcie, lower_32_bits(mask), OB_WIN_MASK_LS(win_num));
+	advk_writel(pcie, upper_32_bits(mask), OB_WIN_MASK_MS(win_num));
+	advk_writel(pcie, actions, OB_WIN_ACTIONS(win_num));
+}
+
+static void advk_pcie_disable_ob_win(struct advk_pcie *pcie, u8 win_num)
+{
+	advk_writel(pcie, 0, OB_WIN_MATCH_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MATCH_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_REMAP_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_REMAP_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MASK_LS(win_num));
+	advk_writel(pcie, 0, OB_WIN_MASK_MS(win_num));
+	advk_writel(pcie, 0, OB_WIN_ACTIONS(win_num));
+}
+
 static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 {
 	u32 reg;
+	int i;
 
 	/* Enable TX */
 	reg = advk_readl(pcie, PCIE_CORE_REF_CLK_REG);
@@ -447,15 +528,51 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg = PCIE_IRQ_ALL_MASK & (~PCIE_IRQ_ENABLE_INTS_MASK);
 	advk_writel(pcie, reg, HOST_CTRL_INT_MASK_REG);
 
+	/*
+	 * Enable AXI address window location generation:
+	 * When it is enabled, the default outbound window
+	 * configurations (Default User Field: 0xD0074CFC)
+	 * are used to transparent address translation for
+	 * the outbound transactions. Thus, PCIe address
+	 * windows are not required for transparent memory
+	 * access when default outbound window configuration
+	 * is set for memory access.
+	 */
 	reg = advk_readl(pcie, PCIE_CORE_CTRL2_REG);
 	reg |= PCIE_CORE_CTRL2_OB_WIN_ENABLE;
 	advk_writel(pcie, reg, PCIE_CORE_CTRL2_REG);
 
-	/* Bypass the address window mapping for PIO */
+	/*
+	 * Set memory access in Default User Field so it
+	 * is not required to configure PCIe address for
+	 * transparent memory access.
+	 */
+	advk_writel(pcie, OB_WIN_TYPE_MEM, OB_WIN_DEFAULT_ACTIONS);
+
+	/*
+	 * Bypass the address window mapping for PIO:
+	 * Since PIO access already contains all required
+	 * info over AXI interface by PIO registers, the
+	 * address window is not required.
+	 */
 	reg = advk_readl(pcie, PIO_CTRL);
 	reg |= PIO_CTRL_ADDR_WIN_DISABLE;
 	advk_writel(pcie, reg, PIO_CTRL);
 
+	/*
+	 * Configure PCIe address windows for non-memory or
+	 * non-transparent access as by default PCIe uses
+	 * transparent memory access.
+	 */
+	for (i = 0; i < pcie->wins_count; i++)
+		advk_pcie_set_ob_win(pcie, i,
+				     pcie->wins[i].match, pcie->wins[i].remap,
+				     pcie->wins[i].mask, pcie->wins[i].actions);
+
+	/* Disable remaining PCIe outbound windows */
+	for (i = pcie->wins_count; i < OB_WIN_COUNT; i++)
+		advk_pcie_disable_ob_win(pcie, i);
+
 	advk_pcie_train_link(pcie);
 
 	/*
@@ -472,7 +589,7 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	advk_writel(pcie, reg, PCIE_CORE_CMD_STATUS_REG);
 }
 
-static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
+static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u32 *val)
 {
 	struct device *dev = &pcie->pdev->dev;
 	u32 reg;
@@ -483,14 +600,70 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
 	status = (reg & PIO_COMPLETION_STATUS_MASK) >>
 		PIO_COMPLETION_STATUS_SHIFT;
 
-	if (!status)
-		return;
-
+	/*
+	 * According to HW spec, the PIO status check sequence as below:
+	 * 1) even if COMPLETION_STATUS(bit9:7) indicates successful,
+	 *    it still needs to check Error Status(bit11), only when this bit
+	 *    indicates no error happen, the operation is successful.
+	 * 2) value Unsupported Request(1) of COMPLETION_STATUS(bit9:7) only
+	 *    means a PIO write error, and for PIO read it is successful with
+	 *    a read value of 0xFFFFFFFF.
+	 * 3) value Completion Retry Status(CRS) of COMPLETION_STATUS(bit9:7)
+	 *    only means a PIO write error, and for PIO read it is successful
+	 *    with a read value of 0xFFFF0001.
+	 * 4) value Completer Abort (CA) of COMPLETION_STATUS(bit9:7) means
+	 *    error for both PIO read and PIO write operation.
+	 * 5) other errors are indicated as 'unknown'.
+	 */
 	switch (status) {
+	case PIO_COMPLETION_STATUS_OK:
+		if (reg & PIO_ERR_STATUS) {
+			strcomp_status = "COMP_ERR";
+			break;
+		}
+		/* Get the read result */
+		if (val)
+			*val = advk_readl(pcie, PIO_RD_DATA);
+		/* No error */
+		strcomp_status = NULL;
+		break;
 	case PIO_COMPLETION_STATUS_UR:
 		strcomp_status = "UR";
 		break;
 	case PIO_COMPLETION_STATUS_CRS:
+		if (allow_crs && val) {
+			/* PCIe r4.0, sec 2.3.2, says:
+			 * If CRS Software Visibility is enabled:
+			 * For a Configuration Read Request that includes both
+			 * bytes of the Vendor ID field of a device Function's
+			 * Configuration Space Header, the Root Complex must
+			 * complete the Request to the host by returning a
+			 * read-data value of 0001h for the Vendor ID field and
+			 * all '1's for any additional bytes included in the
+			 * request.
+			 *
+			 * So CRS in this case is not an error status.
+			 */
+			*val = CFG_RD_CRS_VAL;
+			strcomp_status = NULL;
+			break;
+		}
+		/* PCIe r4.0, sec 2.3.2, says:
+		 * If CRS Software Visibility is not enabled, the Root Complex
+		 * must re-issue the Configuration Request as a new Request.
+		 * If CRS Software Visibility is enabled: For a Configuration
+		 * Write Request or for any other Configuration Read Request,
+		 * the Root Complex must re-issue the Configuration Request as
+		 * a new Request.
+		 * A Root Complex implementation may choose to limit the number
+		 * of Configuration Request/CRS Completion Status loops before
+		 * determining that something is wrong with the target of the
+		 * Request and taking appropriate action, e.g., complete the
+		 * Request to the host as a failed transaction.
+		 *
+		 * To simplify implementation do not re-issue the Configuration
+		 * Request and complete the Request as a failed transaction.
+		 */
 		strcomp_status = "CRS";
 		break;
 	case PIO_COMPLETION_STATUS_CA:
@@ -501,6 +674,9 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
 		break;
 	}
 
+	if (!strcomp_status)
+		return 0;
+
 	if (reg & PIO_NON_POSTED_REQ)
 		str_posted = "Non-posted";
 	else
@@ -508,6 +684,8 @@ static void advk_pcie_check_pio_status(struct advk_pcie *pcie)
 
 	dev_err(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
 		str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
+
+	return -EFAULT;
 }
 
 static int advk_pcie_wait_pio(struct advk_pcie *pcie)
@@ -545,6 +723,7 @@ advk_pci_bridge_emul_pcie_conf_read(struct pci_bridge_emul *bridge,
 	case PCI_EXP_RTCTL: {
 		u32 val = advk_readl(pcie, PCIE_ISR0_MASK_REG);
 		*value = (val & PCIE_MSG_PM_PME_MASK) ? 0 : PCI_EXP_RTCTL_PMEIE;
+		*value |= PCI_EXP_RTCAP_CRSVIS << 16;
 		return PCI_BRIDGE_EMUL_HANDLED;
 	}
 
@@ -626,6 +805,7 @@ static struct pci_bridge_emul_ops advk_pci_bridge_emul_ops = {
 static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 {
 	struct pci_bridge_emul *bridge = &pcie->bridge;
+	int ret;
 
 	bridge->conf.vendor =
 		cpu_to_le16(advk_readl(pcie, PCIE_CORE_DEV_ID_REG) & 0xffff);
@@ -649,7 +829,15 @@ static int advk_sw_pci_bridge_init(struct advk_pcie *pcie)
 	bridge->data = pcie;
 	bridge->ops = &advk_pci_bridge_emul_ops;
 
-	return pci_bridge_emul_init(bridge, 0);
+	/* PCIe config space can be initialized after pci_bridge_emul_init() */
+	ret = pci_bridge_emul_init(bridge, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Indicates supports for Completion Retry Status */
+	bridge->pcie_conf.rootcap = cpu_to_le16(PCI_EXP_RTCAP_CRSVIS);
+
+	return 0;
 }
 
 static bool advk_pcie_valid_device(struct advk_pcie *pcie, struct pci_bus *bus,
@@ -701,6 +889,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 			     int where, int size, u32 *val)
 {
 	struct advk_pcie *pcie = bus->sysdata;
+	bool allow_crs;
 	u32 reg;
 	int ret;
 
@@ -713,7 +902,24 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 		return pci_bridge_emul_conf_read(&pcie->bridge, where,
 						 size, val);
 
+	/*
+	 * Completion Retry Status is possible to return only when reading all
+	 * 4 bytes from PCI_VENDOR_ID and PCI_DEVICE_ID registers at once and
+	 * CRSSVE flag on Root Bridge is enabled.
+	 */
+	allow_crs = (where == PCI_VENDOR_ID) && (size == 4) &&
+		    (le16_to_cpu(pcie->bridge.pcie_conf.rootctl) &
+		     PCI_EXP_RTCTL_CRSSVE);
+
 	if (advk_pcie_pio_is_running(pcie)) {
+		/*
+		 * If it is possible return Completion Retry Status so caller
+		 * tries to issue the request again instead of failing.
+		 */
+		if (allow_crs) {
+			*val = CFG_RD_CRS_VAL;
+			return PCIBIOS_SUCCESSFUL;
+		}
 		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
 	}
@@ -741,14 +947,25 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 
 	ret = advk_pcie_wait_pio(pcie);
 	if (ret < 0) {
+		/*
+		 * If it is possible return Completion Retry Status so caller
+		 * tries to issue the request again instead of failing.
+		 */
+		if (allow_crs) {
+			*val = CFG_RD_CRS_VAL;
+			return PCIBIOS_SUCCESSFUL;
+		}
 		*val = 0xffffffff;
 		return PCIBIOS_SET_FAILED;
 	}
 
-	advk_pcie_check_pio_status(pcie);
+	/* Check PIO status and get the read result */
+	ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+	if (ret < 0) {
+		*val = 0xffffffff;
+		return PCIBIOS_SET_FAILED;
+	}
 
-	/* Get the read result */
-	*val = advk_readl(pcie, PIO_RD_DATA);
 	if (size == 1)
 		*val = (*val >> (8 * (where & 3))) & 0xff;
 	else if (size == 2)
@@ -812,7 +1029,9 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	if (ret < 0)
 		return PCIBIOS_SET_FAILED;
 
-	advk_pcie_check_pio_status(pcie);
+	ret = advk_pcie_check_pio_status(pcie, false, NULL);
+	if (ret < 0)
+		return PCIBIOS_SET_FAILED;
 
 	return PCIBIOS_SUCCESSFUL;
 }
@@ -886,22 +1105,28 @@ static void advk_pcie_irq_mask(struct irq_data *d)
 {
 	struct advk_pcie *pcie = d->domain->host_data;
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	unsigned long flags;
 	u32 mask;
 
+	raw_spin_lock_irqsave(&pcie->irq_lock, flags);
 	mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
 	mask |= PCIE_ISR1_INTX_ASSERT(hwirq);
 	advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+	raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
 }
 
 static void advk_pcie_irq_unmask(struct irq_data *d)
 {
 	struct advk_pcie *pcie = d->domain->host_data;
 	irq_hw_number_t hwirq = irqd_to_hwirq(d);
+	unsigned long flags;
 	u32 mask;
 
+	raw_spin_lock_irqsave(&pcie->irq_lock, flags);
 	mask = advk_readl(pcie, PCIE_ISR1_MASK_REG);
 	mask &= ~PCIE_ISR1_INTX_ASSERT(hwirq);
 	advk_writel(pcie, mask, PCIE_ISR1_MASK_REG);
+	raw_spin_unlock_irqrestore(&pcie->irq_lock, flags);
 }
 
 static int advk_pcie_irq_map(struct irq_domain *h,
@@ -985,6 +1210,8 @@ static int advk_pcie_init_irq_domain(struct advk_pcie *pcie)
 	struct irq_chip *irq_chip;
 	int ret = 0;
 
+	raw_spin_lock_init(&pcie->irq_lock);
+
 	pcie_intc_node =  of_get_next_child(node, NULL);
 	if (!pcie_intc_node) {
 		dev_err(dev, "No PCIe Intc node found\n");
@@ -1049,7 +1276,7 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
 {
 	u32 isr0_val, isr0_mask, isr0_status;
 	u32 isr1_val, isr1_mask, isr1_status;
-	int i, virq;
+	int i;
 
 	isr0_val = advk_readl(pcie, PCIE_ISR0_REG);
 	isr0_mask = advk_readl(pcie, PCIE_ISR0_MASK_REG);
@@ -1077,8 +1304,7 @@ static void advk_pcie_handle_int(struct advk_pcie *pcie)
 		advk_writel(pcie, PCIE_ISR1_INTX_ASSERT(i),
 			    PCIE_ISR1_REG);
 
-		virq = irq_find_mapping(pcie->irq_domain, i);
-		generic_handle_irq(virq);
+		generic_handle_domain_irq(pcie->irq_domain, i);
 	}
 }
 
@@ -1162,6 +1388,7 @@ static int advk_pcie_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct advk_pcie *pcie;
 	struct pci_host_bridge *bridge;
+	struct resource_entry *entry;
 	int ret, irq;
 
 	bridge = devm_pci_alloc_host_bridge(dev, sizeof(struct advk_pcie));
@@ -1172,6 +1399,80 @@ static int advk_pcie_probe(struct platform_device *pdev)
 	pcie->pdev = pdev;
 	platform_set_drvdata(pdev, pcie);
 
+	resource_list_for_each_entry(entry, &bridge->windows) {
+		resource_size_t start = entry->res->start;
+		resource_size_t size = resource_size(entry->res);
+		unsigned long type = resource_type(entry->res);
+		u64 win_size;
+
+		/*
+		 * Aardvark hardware allows to configure also PCIe window
+		 * for config type 0 and type 1 mapping, but driver uses
+		 * only PIO for issuing configuration transfers which does
+		 * not use PCIe window configuration.
+		 */
+		if (type != IORESOURCE_MEM && type != IORESOURCE_MEM_64 &&
+		    type != IORESOURCE_IO)
+			continue;
+
+		/*
+		 * Skip transparent memory resources. Default outbound access
+		 * configuration is set to transparent memory access so it
+		 * does not need window configuration.
+		 */
+		if ((type == IORESOURCE_MEM || type == IORESOURCE_MEM_64) &&
+		    entry->offset == 0)
+			continue;
+
+		/*
+		 * The n-th PCIe window is configured by tuple (match, remap, mask)
+		 * and an access to address A uses this window if A matches the
+		 * match with given mask.
+		 * So every PCIe window size must be a power of two and every start
+		 * address must be aligned to window size. Minimal size is 64 KiB
+		 * because lower 16 bits of mask must be zero. Remapped address
+		 * may have set only bits from the mask.
+		 */
+		while (pcie->wins_count < OB_WIN_COUNT && size > 0) {
+			/* Calculate the largest aligned window size */
+			win_size = (1ULL << (fls64(size)-1)) |
+				   (start ? (1ULL << __ffs64(start)) : 0);
+			win_size = 1ULL << __ffs64(win_size);
+			if (win_size < 0x10000)
+				break;
+
+			dev_dbg(dev,
+				"Configuring PCIe window %d: [0x%llx-0x%llx] as %lu\n",
+				pcie->wins_count, (unsigned long long)start,
+				(unsigned long long)start + win_size, type);
+
+			if (type == IORESOURCE_IO) {
+				pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_IO;
+				pcie->wins[pcie->wins_count].match = pci_pio_to_address(start);
+			} else {
+				pcie->wins[pcie->wins_count].actions = OB_WIN_TYPE_MEM;
+				pcie->wins[pcie->wins_count].match = start;
+			}
+			pcie->wins[pcie->wins_count].remap = start - entry->offset;
+			pcie->wins[pcie->wins_count].mask = ~(win_size - 1);
+
+			if (pcie->wins[pcie->wins_count].remap & (win_size - 1))
+				break;
+
+			start += win_size;
+			size -= win_size;
+			pcie->wins_count++;
+		}
+
+		if (size > 0) {
+			dev_err(&pcie->pdev->dev,
+				"Invalid PCIe region [0x%llx-0x%llx]\n",
+				(unsigned long long)entry->res->start,
+				(unsigned long long)entry->res->end + 1);
+			return -EINVAL;
+		}
+	}
+
 	pcie->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(pcie->base))
 		return PTR_ERR(pcie->base);
@@ -1252,6 +1553,7 @@ static int advk_pcie_remove(struct platform_device *pdev)
 {
 	struct advk_pcie *pcie = platform_get_drvdata(pdev);
 	struct pci_host_bridge *bridge = pci_host_bridge_from_priv(pcie);
+	int i;
 
 	pci_lock_rescan_remove();
 	pci_stop_root_bus(bridge->bus);
@@ -1261,6 +1563,10 @@ static int advk_pcie_remove(struct platform_device *pdev)
 	advk_pcie_remove_msi_irq_domain(pcie);
 	advk_pcie_remove_irq_domain(pcie);
 
+	/* Disable outbound address windows mapping */
+	for (i = 0; i < OB_WIN_COUNT; i++)
+		advk_pcie_disable_ob_win(pcie, i);
+
 	return 0;
 }
 
diff --git a/drivers/pci/controller/pci-ftpci100.c b/drivers/pci/controller/pci-ftpci100.c
index aefef1986201..88980a44461d 100644
--- a/drivers/pci/controller/pci-ftpci100.c
+++ b/drivers/pci/controller/pci-ftpci100.c
@@ -314,7 +314,7 @@ static void faraday_pci_irq_handler(struct irq_desc *desc)
 	for (i = 0; i < 4; i++) {
 		if ((irq_stat & BIT(i)) == 0)
 			continue;
-		generic_handle_irq(irq_find_mapping(p->irqdomain, i));
+		generic_handle_domain_irq(p->irqdomain, i);
 	}
 
 	chained_irq_exit(irqchip, desc);
diff --git a/drivers/pci/controller/pci-hyperv.c b/drivers/pci/controller/pci-hyperv.c
index a53bd8728d0d..eaec915ffe62 100644
--- a/drivers/pci/controller/pci-hyperv.c
+++ b/drivers/pci/controller/pci-hyperv.c
@@ -40,6 +40,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
+#include <linux/pci-ecam.h>
 #include <linux/delay.h>
 #include <linux/semaphore.h>
 #include <linux/irqdomain.h>
@@ -64,6 +65,7 @@ enum pci_protocol_version_t {
 	PCI_PROTOCOL_VERSION_1_1 = PCI_MAKE_VERSION(1, 1),	/* Win10 */
 	PCI_PROTOCOL_VERSION_1_2 = PCI_MAKE_VERSION(1, 2),	/* RS1 */
 	PCI_PROTOCOL_VERSION_1_3 = PCI_MAKE_VERSION(1, 3),	/* Vibranium */
+	PCI_PROTOCOL_VERSION_1_4 = PCI_MAKE_VERSION(1, 4),	/* WS2022 */
 };
 
 #define CPU_AFFINITY_ALL	-1ULL
@@ -73,6 +75,7 @@ enum pci_protocol_version_t {
  * first.
  */
 static enum pci_protocol_version_t pci_protocol_versions[] = {
+	PCI_PROTOCOL_VERSION_1_4,
 	PCI_PROTOCOL_VERSION_1_3,
 	PCI_PROTOCOL_VERSION_1_2,
 	PCI_PROTOCOL_VERSION_1_1,
@@ -122,6 +125,8 @@ enum pci_message_type {
 	PCI_CREATE_INTERRUPT_MESSAGE2	= PCI_MESSAGE_BASE + 0x17,
 	PCI_DELETE_INTERRUPT_MESSAGE2	= PCI_MESSAGE_BASE + 0x18, /* unused */
 	PCI_BUS_RELATIONS2		= PCI_MESSAGE_BASE + 0x19,
+	PCI_RESOURCES_ASSIGNED3         = PCI_MESSAGE_BASE + 0x1A,
+	PCI_CREATE_INTERRUPT_MESSAGE3   = PCI_MESSAGE_BASE + 0x1B,
 	PCI_MESSAGE_MAXIMUM
 };
 
@@ -235,6 +240,21 @@ struct hv_msi_desc2 {
 	u16	processor_array[32];
 } __packed;
 
+/*
+ * struct hv_msi_desc3 - 1.3 version of hv_msi_desc
+ *	Everything is the same as in 'hv_msi_desc2' except that the size of the
+ *	'vector' field is larger to support bigger vector values. For ex: LPI
+ *	vectors on ARM.
+ */
+struct hv_msi_desc3 {
+	u32	vector;
+	u8	delivery_mode;
+	u8	reserved;
+	u16	vector_count;
+	u16	processor_count;
+	u16	processor_array[32];
+} __packed;
+
 /**
  * struct tran_int_desc
  * @reserved:		unused, padding
@@ -383,6 +403,12 @@ struct pci_create_interrupt2 {
 	struct hv_msi_desc2 int_desc;
 } __packed;
 
+struct pci_create_interrupt3 {
+	struct pci_message message_type;
+	union win_slot_encoding wslot;
+	struct hv_msi_desc3 int_desc;
+} __packed;
+
 struct pci_delete_interrupt {
 	struct pci_message message_type;
 	union win_slot_encoding wslot;
@@ -448,7 +474,13 @@ enum hv_pcibus_state {
 };
 
 struct hv_pcibus_device {
+#ifdef CONFIG_X86
 	struct pci_sysdata sysdata;
+#elif defined(CONFIG_ARM64)
+	struct pci_config_window sysdata;
+#endif
+	struct pci_host_bridge *bridge;
+	struct fwnode_handle *fwnode;
 	/* Protocol version negotiated with the host */
 	enum pci_protocol_version_t protocol_version;
 	enum hv_pcibus_state state;
@@ -464,8 +496,6 @@ struct hv_pcibus_device {
 	spinlock_t device_list_lock;	/* Protect lists below */
 	void __iomem *cfg_addr;
 
-	struct list_head resources_for_children;
-
 	struct list_head children;
 	struct list_head dr_list;
 
@@ -1328,6 +1358,15 @@ static u32 hv_compose_msi_req_v1(
 	return sizeof(*int_pkt);
 }
 
+/*
+ * Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten
+ * by subsequent retarget in hv_irq_unmask().
+ */
+static int hv_compose_msi_req_get_cpu(struct cpumask *affinity)
+{
+	return cpumask_first_and(affinity, cpu_online_mask);
+}
+
 static u32 hv_compose_msi_req_v2(
 	struct pci_create_interrupt2 *int_pkt, struct cpumask *affinity,
 	u32 slot, u8 vector)
@@ -1339,12 +1378,27 @@ static u32 hv_compose_msi_req_v2(
 	int_pkt->int_desc.vector = vector;
 	int_pkt->int_desc.vector_count = 1;
 	int_pkt->int_desc.delivery_mode = APIC_DELIVERY_MODE_FIXED;
+	cpu = hv_compose_msi_req_get_cpu(affinity);
+	int_pkt->int_desc.processor_array[0] =
+		hv_cpu_number_to_vp_number(cpu);
+	int_pkt->int_desc.processor_count = 1;
 
-	/*
-	 * Create MSI w/ dummy vCPU set targeting just one vCPU, overwritten
-	 * by subsequent retarget in hv_irq_unmask().
-	 */
-	cpu = cpumask_first_and(affinity, cpu_online_mask);
+	return sizeof(*int_pkt);
+}
+
+static u32 hv_compose_msi_req_v3(
+	struct pci_create_interrupt3 *int_pkt, struct cpumask *affinity,
+	u32 slot, u32 vector)
+{
+	int cpu;
+
+	int_pkt->message_type.type = PCI_CREATE_INTERRUPT_MESSAGE3;
+	int_pkt->wslot.slot = slot;
+	int_pkt->int_desc.vector = vector;
+	int_pkt->int_desc.reserved = 0;
+	int_pkt->int_desc.vector_count = 1;
+	int_pkt->int_desc.delivery_mode = APIC_DELIVERY_MODE_FIXED;
+	cpu = hv_compose_msi_req_get_cpu(affinity);
 	int_pkt->int_desc.processor_array[0] =
 		hv_cpu_number_to_vp_number(cpu);
 	int_pkt->int_desc.processor_count = 1;
@@ -1379,6 +1433,7 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 		union {
 			struct pci_create_interrupt v1;
 			struct pci_create_interrupt2 v2;
+			struct pci_create_interrupt3 v3;
 		} int_pkts;
 	} __packed ctxt;
 
@@ -1426,6 +1481,13 @@ static void hv_compose_msi_msg(struct irq_data *data, struct msi_msg *msg)
 					cfg->vector);
 		break;
 
+	case PCI_PROTOCOL_VERSION_1_4:
+		size = hv_compose_msi_req_v3(&ctxt.int_pkts.v3,
+					dest,
+					hpdev->desc.win_slot.slot,
+					cfg->vector);
+		break;
+
 	default:
 		/* As we only negotiate protocol versions known to this driver,
 		 * this path should never hit. However, this is it not a hot
@@ -1566,7 +1628,7 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus)
 	hbus->msi_info.handler = handle_edge_irq;
 	hbus->msi_info.handler_name = "edge";
 	hbus->msi_info.data = hbus;
-	hbus->irq_domain = pci_msi_create_irq_domain(hbus->sysdata.fwnode,
+	hbus->irq_domain = pci_msi_create_irq_domain(hbus->fwnode,
 						     &hbus->msi_info,
 						     x86_vector_domain);
 	if (!hbus->irq_domain) {
@@ -1575,6 +1637,8 @@ static int hv_pcie_init_irq_domain(struct hv_pcibus_device *hbus)
 		return -ENODEV;
 	}
 
+	dev_set_msi_domain(&hbus->bridge->dev, hbus->irq_domain);
+
 	return 0;
 }
 
@@ -1797,7 +1861,7 @@ static void hv_pci_assign_slots(struct hv_pcibus_device *hbus)
 
 		slot_nr = PCI_SLOT(wslot_to_devfn(hpdev->desc.win_slot.slot));
 		snprintf(name, SLOT_NAME_SIZE, "%u", hpdev->desc.ser);
-		hpdev->pci_slot = pci_create_slot(hbus->pci_bus, slot_nr,
+		hpdev->pci_slot = pci_create_slot(hbus->bridge->bus, slot_nr,
 					  name, NULL);
 		if (IS_ERR(hpdev->pci_slot)) {
 			pr_warn("pci_create slot %s failed\n", name);
@@ -1827,7 +1891,7 @@ static void hv_pci_remove_slots(struct hv_pcibus_device *hbus)
 static void hv_pci_assign_numa_node(struct hv_pcibus_device *hbus)
 {
 	struct pci_dev *dev;
-	struct pci_bus *bus = hbus->pci_bus;
+	struct pci_bus *bus = hbus->bridge->bus;
 	struct hv_pci_dev *hv_dev;
 
 	list_for_each_entry(dev, &bus->devices, bus_list) {
@@ -1850,21 +1914,22 @@ static void hv_pci_assign_numa_node(struct hv_pcibus_device *hbus)
  */
 static int create_root_hv_pci_bus(struct hv_pcibus_device *hbus)
 {
-	/* Register the device */
-	hbus->pci_bus = pci_create_root_bus(&hbus->hdev->device,
-					    0, /* bus number is always zero */
-					    &hv_pcifront_ops,
-					    &hbus->sysdata,
-					    &hbus->resources_for_children);
-	if (!hbus->pci_bus)
-		return -ENODEV;
+	int error;
+	struct pci_host_bridge *bridge = hbus->bridge;
+
+	bridge->dev.parent = &hbus->hdev->device;
+	bridge->sysdata = &hbus->sysdata;
+	bridge->ops = &hv_pcifront_ops;
+
+	error = pci_scan_root_bus_bridge(bridge);
+	if (error)
+		return error;
 
 	pci_lock_rescan_remove();
-	pci_scan_child_bus(hbus->pci_bus);
 	hv_pci_assign_numa_node(hbus);
-	pci_bus_assign_resources(hbus->pci_bus);
+	pci_bus_assign_resources(bridge->bus);
 	hv_pci_assign_slots(hbus);
-	pci_bus_add_devices(hbus->pci_bus);
+	pci_bus_add_devices(bridge->bus);
 	pci_unlock_rescan_remove();
 	hbus->state = hv_pcibus_installed;
 	return 0;
@@ -2127,7 +2192,7 @@ static void pci_devices_present_work(struct work_struct *work)
 		 * because there may have been changes.
 		 */
 		pci_lock_rescan_remove();
-		pci_scan_child_bus(hbus->pci_bus);
+		pci_scan_child_bus(hbus->bridge->bus);
 		hv_pci_assign_numa_node(hbus);
 		hv_pci_assign_slots(hbus);
 		pci_unlock_rescan_remove();
@@ -2295,11 +2360,11 @@ static void hv_eject_device_work(struct work_struct *work)
 	/*
 	 * Ejection can come before or after the PCI bus has been set up, so
 	 * attempt to find it and tear down the bus state, if it exists.  This
-	 * must be done without constructs like pci_domain_nr(hbus->pci_bus)
-	 * because hbus->pci_bus may not exist yet.
+	 * must be done without constructs like pci_domain_nr(hbus->bridge->bus)
+	 * because hbus->bridge->bus may not exist yet.
 	 */
 	wslot = wslot_to_devfn(hpdev->desc.win_slot.slot);
-	pdev = pci_get_domain_bus_and_slot(hbus->sysdata.domain, 0, wslot);
+	pdev = pci_get_domain_bus_and_slot(hbus->bridge->domain_nr, 0, wslot);
 	if (pdev) {
 		pci_lock_rescan_remove();
 		pci_stop_and_remove_bus_device(pdev);
@@ -2662,8 +2727,7 @@ static int hv_pci_allocate_bridge_windows(struct hv_pcibus_device *hbus)
 		/* Modify this resource to become a bridge window. */
 		hbus->low_mmio_res->flags |= IORESOURCE_WINDOW;
 		hbus->low_mmio_res->flags &= ~IORESOURCE_BUSY;
-		pci_add_resource(&hbus->resources_for_children,
-				 hbus->low_mmio_res);
+		pci_add_resource(&hbus->bridge->windows, hbus->low_mmio_res);
 	}
 
 	if (hbus->high_mmio_space) {
@@ -2682,8 +2746,7 @@ static int hv_pci_allocate_bridge_windows(struct hv_pcibus_device *hbus)
 		/* Modify this resource to become a bridge window. */
 		hbus->high_mmio_res->flags |= IORESOURCE_WINDOW;
 		hbus->high_mmio_res->flags &= ~IORESOURCE_BUSY;
-		pci_add_resource(&hbus->resources_for_children,
-				 hbus->high_mmio_res);
+		pci_add_resource(&hbus->bridge->windows, hbus->high_mmio_res);
 	}
 
 	return 0;
@@ -3002,6 +3065,7 @@ static void hv_put_dom_num(u16 dom)
 static int hv_pci_probe(struct hv_device *hdev,
 			const struct hv_vmbus_device_id *dev_id)
 {
+	struct pci_host_bridge *bridge;
 	struct hv_pcibus_device *hbus;
 	u16 dom_req, dom;
 	char *name;
@@ -3014,6 +3078,10 @@ static int hv_pci_probe(struct hv_device *hdev,
 	 */
 	BUILD_BUG_ON(sizeof(*hbus) > HV_HYP_PAGE_SIZE);
 
+	bridge = devm_pci_alloc_host_bridge(&hdev->device, 0);
+	if (!bridge)
+		return -ENOMEM;
+
 	/*
 	 * With the recent 59bb47985c1d ("mm, sl[aou]b: guarantee natural
 	 * alignment for kmalloc(power-of-two)"), kzalloc() is able to allocate
@@ -3035,6 +3103,8 @@ static int hv_pci_probe(struct hv_device *hdev,
 	hbus = kzalloc(HV_HYP_PAGE_SIZE, GFP_KERNEL);
 	if (!hbus)
 		return -ENOMEM;
+
+	hbus->bridge = bridge;
 	hbus->state = hv_pcibus_init;
 	hbus->wslot_res_allocated = -1;
 
@@ -3066,17 +3136,19 @@ static int hv_pci_probe(struct hv_device *hdev,
 			 "PCI dom# 0x%hx has collision, using 0x%hx",
 			 dom_req, dom);
 
+	hbus->bridge->domain_nr = dom;
+#ifdef CONFIG_X86
 	hbus->sysdata.domain = dom;
+#endif
 
 	hbus->hdev = hdev;
 	INIT_LIST_HEAD(&hbus->children);
 	INIT_LIST_HEAD(&hbus->dr_list);
-	INIT_LIST_HEAD(&hbus->resources_for_children);
 	spin_lock_init(&hbus->config_lock);
 	spin_lock_init(&hbus->device_list_lock);
 	spin_lock_init(&hbus->retarget_msi_interrupt_lock);
 	hbus->wq = alloc_ordered_workqueue("hv_pci_%x", 0,
-					   hbus->sysdata.domain);
+					   hbus->bridge->domain_nr);
 	if (!hbus->wq) {
 		ret = -ENOMEM;
 		goto free_dom;
@@ -3113,9 +3185,9 @@ static int hv_pci_probe(struct hv_device *hdev,
 		goto unmap;
 	}
 
-	hbus->sysdata.fwnode = irq_domain_alloc_named_fwnode(name);
+	hbus->fwnode = irq_domain_alloc_named_fwnode(name);
 	kfree(name);
-	if (!hbus->sysdata.fwnode) {
+	if (!hbus->fwnode) {
 		ret = -ENOMEM;
 		goto unmap;
 	}
@@ -3193,7 +3265,7 @@ exit_d0:
 free_irq_domain:
 	irq_domain_remove(hbus->irq_domain);
 free_fwnode:
-	irq_domain_free_fwnode(hbus->sysdata.fwnode);
+	irq_domain_free_fwnode(hbus->fwnode);
 unmap:
 	iounmap(hbus->cfg_addr);
 free_config:
@@ -3203,7 +3275,7 @@ close:
 destroy_wq:
 	destroy_workqueue(hbus->wq);
 free_dom:
-	hv_put_dom_num(hbus->sysdata.domain);
+	hv_put_dom_num(hbus->bridge->domain_nr);
 free_bus:
 	kfree(hbus);
 	return ret;
@@ -3295,9 +3367,9 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 		/* Remove the bus from PCI's point of view. */
 		pci_lock_rescan_remove();
-		pci_stop_root_bus(hbus->pci_bus);
+		pci_stop_root_bus(hbus->bridge->bus);
 		hv_pci_remove_slots(hbus);
-		pci_remove_root_bus(hbus->pci_bus);
+		pci_remove_root_bus(hbus->bridge->bus);
 		pci_unlock_rescan_remove();
 	}
 
@@ -3307,12 +3379,11 @@ static int hv_pci_remove(struct hv_device *hdev)
 
 	iounmap(hbus->cfg_addr);
 	hv_free_config_window(hbus);
-	pci_free_resource_list(&hbus->resources_for_children);
 	hv_pci_free_bridge_windows(hbus);
 	irq_domain_remove(hbus->irq_domain);
-	irq_domain_free_fwnode(hbus->sysdata.fwnode);
+	irq_domain_free_fwnode(hbus->fwnode);
 
-	hv_put_dom_num(hbus->sysdata.domain);
+	hv_put_dom_num(hbus->bridge->domain_nr);
 
 	kfree(hbus);
 	return ret;
@@ -3390,7 +3461,7 @@ static int hv_pci_restore_msi_msg(struct pci_dev *pdev, void *arg)
  */
 static void hv_pci_restore_msi_state(struct hv_pcibus_device *hbus)
 {
-	pci_walk_bus(hbus->pci_bus, hv_pci_restore_msi_msg, NULL);
+	pci_walk_bus(hbus->bridge->bus, hv_pci_restore_msi_msg, NULL);
 }
 
 static int hv_pci_resume(struct hv_device *hdev)
diff --git a/drivers/pci/controller/pci-tegra.c b/drivers/pci/controller/pci-tegra.c
index c979229a6d0d..cb0aa65d6934 100644
--- a/drivers/pci/controller/pci-tegra.c
+++ b/drivers/pci/controller/pci-tegra.c
@@ -372,11 +372,6 @@ struct tegra_pcie_port {
 	struct gpio_desc *reset_gpio;
 };
 
-struct tegra_pcie_bus {
-	struct list_head list;
-	unsigned int nr;
-};
-
 static inline void afi_writel(struct tegra_pcie *pcie, u32 value,
 			      unsigned long offset)
 {
@@ -764,7 +759,7 @@ static int tegra_pcie_map_irq(const struct pci_dev *pdev, u8 slot, u8 pin)
 
 static irqreturn_t tegra_pcie_isr(int irq, void *arg)
 {
-	const char *err_msg[] = {
+	static const char * const err_msg[] = {
 		"Unknown",
 		"AXI slave error",
 		"AXI decode error",
@@ -1553,12 +1548,10 @@ static void tegra_pcie_msi_irq(struct irq_desc *desc)
 		while (reg) {
 			unsigned int offset = find_first_bit(&reg, 32);
 			unsigned int index = i * 32 + offset;
-			unsigned int irq;
+			int ret;
 
-			irq = irq_find_mapping(msi->domain->parent, index);
-			if (irq) {
-				generic_handle_irq(irq);
-			} else {
+			ret = generic_handle_domain_irq(msi->domain->parent, index);
+			if (ret) {
 				/*
 				 * that's weird who triggered this?
 				 * just clear it
@@ -2193,13 +2186,15 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 		rp->np = port;
 
 		rp->base = devm_pci_remap_cfg_resource(dev, &rp->regs);
-		if (IS_ERR(rp->base))
-			return PTR_ERR(rp->base);
+		if (IS_ERR(rp->base)) {
+			err = PTR_ERR(rp->base);
+			goto err_node_put;
+		}
 
 		label = devm_kasprintf(dev, GFP_KERNEL, "pex-reset-%u", index);
 		if (!label) {
-			dev_err(dev, "failed to create reset GPIO label\n");
-			return -ENOMEM;
+			err = -ENOMEM;
+			goto err_node_put;
 		}
 
 		/*
@@ -2217,7 +2212,8 @@ static int tegra_pcie_parse_dt(struct tegra_pcie *pcie)
 			} else {
 				dev_err(dev, "failed to get reset GPIO: %ld\n",
 					PTR_ERR(rp->reset_gpio));
-				return PTR_ERR(rp->reset_gpio);
+				err = PTR_ERR(rp->reset_gpio);
+				goto err_node_put;
 			}
 		}
 
@@ -2548,7 +2544,7 @@ static void *tegra_pcie_ports_seq_start(struct seq_file *s, loff_t *pos)
 	if (list_empty(&pcie->ports))
 		return NULL;
 
-	seq_printf(s, "Index  Status\n");
+	seq_puts(s, "Index  Status\n");
 
 	return seq_list_start(&pcie->ports, *pos);
 }
@@ -2585,16 +2581,16 @@ static int tegra_pcie_ports_seq_show(struct seq_file *s, void *v)
 	seq_printf(s, "%2u     ", port->index);
 
 	if (up)
-		seq_printf(s, "up");
+		seq_puts(s, "up");
 
 	if (active) {
 		if (up)
-			seq_printf(s, ", ");
+			seq_puts(s, ", ");
 
-		seq_printf(s, "active");
+		seq_puts(s, "active");
 	}
 
-	seq_printf(s, "\n");
+	seq_puts(s, "\n");
 	return 0;
 }
 
diff --git a/drivers/pci/controller/pci-xgene-msi.c b/drivers/pci/controller/pci-xgene-msi.c
index 1c34c897a7e2..b7a8e062fcc5 100644
--- a/drivers/pci/controller/pci-xgene-msi.c
+++ b/drivers/pci/controller/pci-xgene-msi.c
@@ -291,8 +291,7 @@ static void xgene_msi_isr(struct irq_desc *desc)
 	struct irq_chip *chip = irq_desc_get_chip(desc);
 	struct xgene_msi_group *msi_groups;
 	struct xgene_msi *xgene_msi;
-	unsigned int virq;
-	int msir_index, msir_val, hw_irq;
+	int msir_index, msir_val, hw_irq, ret;
 	u32 intr_index, grp_select, msi_grp;
 
 	chained_irq_enter(chip, desc);
@@ -330,10 +329,8 @@ static void xgene_msi_isr(struct irq_desc *desc)
 			 * CPU0
 			 */
 			hw_irq = hwirq_to_canonical_hwirq(hw_irq);
-			virq = irq_find_mapping(xgene_msi->inner_domain, hw_irq);
-			WARN_ON(!virq);
-			if (virq != 0)
-				generic_handle_irq(virq);
+			ret = generic_handle_domain_irq(xgene_msi->inner_domain, hw_irq);
+			WARN_ON_ONCE(ret);
 			msir_val &= ~(1 << intr_index);
 		}
 		grp_select &= ~(1 << msir_index);
@@ -451,7 +448,6 @@ static int xgene_msi_probe(struct platform_device *pdev)
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	xgene_msi->msi_regs = devm_ioremap_resource(&pdev->dev, res);
 	if (IS_ERR(xgene_msi->msi_regs)) {
-		dev_err(&pdev->dev, "no reg space\n");
 		rc = PTR_ERR(xgene_msi->msi_regs);
 		goto error;
 	}
diff --git a/drivers/pci/controller/pcie-altera-msi.c b/drivers/pci/controller/pcie-altera-msi.c
index 98aa1dccc6e6..7b1d3ebc34ec 100644
--- a/drivers/pci/controller/pcie-altera-msi.c
+++ b/drivers/pci/controller/pcie-altera-msi.c
@@ -55,7 +55,7 @@ static void altera_msi_isr(struct irq_desc *desc)
 	struct altera_msi *msi;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
+	int ret;
 
 	chained_irq_enter(chip, desc);
 	msi = irq_desc_get_handler_data(desc);
@@ -65,11 +65,9 @@ static void altera_msi_isr(struct irq_desc *desc)
 			/* Dummy read from vector to clear the interrupt */
 			readl_relaxed(msi->vector_base + (bit * sizeof(u32)));
 
-			virq = irq_find_mapping(msi->inner_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-			else
-				dev_err(&msi->pdev->dev, "unexpected MSI\n");
+			ret = generic_handle_domain_irq(msi->inner_domain, bit);
+			if (ret)
+				dev_err_ratelimited(&msi->pdev->dev, "unexpected MSI\n");
 		}
 	}
 
diff --git a/drivers/pci/controller/pcie-altera.c b/drivers/pci/controller/pcie-altera.c
index 523bd928b380..2513e9363236 100644
--- a/drivers/pci/controller/pcie-altera.c
+++ b/drivers/pci/controller/pcie-altera.c
@@ -646,7 +646,7 @@ static void altera_pcie_isr(struct irq_desc *desc)
 	struct device *dev;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
+	int ret;
 
 	chained_irq_enter(chip, desc);
 	pcie = irq_desc_get_handler_data(desc);
@@ -658,11 +658,9 @@ static void altera_pcie_isr(struct irq_desc *desc)
 			/* clear interrupts */
 			cra_writel(pcie, 1 << bit, P2A_INT_STATUS);
 
-			virq = irq_find_mapping(pcie->irq_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-			else
-				dev_err(dev, "unexpected IRQ, INT%d\n", bit);
+			ret = generic_handle_domain_irq(pcie->irq_domain, bit);
+			if (ret)
+				dev_err_ratelimited(dev, "unexpected IRQ, INT%d\n", bit);
 		}
 	}
 
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index 08bc788d9422..cc30215f5a43 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -476,7 +476,7 @@ static struct msi_domain_info brcm_msi_domain_info = {
 static void brcm_pcie_msi_isr(struct irq_desc *desc)
 {
 	struct irq_chip *chip = irq_desc_get_chip(desc);
-	unsigned long status, virq;
+	unsigned long status;
 	struct brcm_msi *msi;
 	struct device *dev;
 	u32 bit;
@@ -489,10 +489,9 @@ static void brcm_pcie_msi_isr(struct irq_desc *desc)
 	status >>= msi->legacy_shift;
 
 	for_each_set_bit(bit, &status, msi->nr) {
-		virq = irq_find_mapping(msi->inner_domain, bit);
-		if (virq)
-			generic_handle_irq(virq);
-		else
+		int ret;
+		ret = generic_handle_domain_irq(msi->inner_domain, bit);
+		if (ret)
 			dev_dbg(dev, "unexpected MSI\n");
 	}
 
diff --git a/drivers/pci/controller/pcie-iproc-bcma.c b/drivers/pci/controller/pcie-iproc-bcma.c
index 56b8ee7bf330..f918c713afb0 100644
--- a/drivers/pci/controller/pcie-iproc-bcma.c
+++ b/drivers/pci/controller/pcie-iproc-bcma.c
@@ -35,7 +35,6 @@ static int iproc_pcie_bcma_probe(struct bcma_device *bdev)
 {
 	struct device *dev = &bdev->dev;
 	struct iproc_pcie *pcie;
-	LIST_HEAD(resources);
 	struct pci_host_bridge *bridge;
 	int ret;
 
@@ -60,19 +59,16 @@ static int iproc_pcie_bcma_probe(struct bcma_device *bdev)
 	pcie->mem.end = bdev->addr_s[0] + SZ_128M - 1;
 	pcie->mem.name = "PCIe MEM space";
 	pcie->mem.flags = IORESOURCE_MEM;
-	pci_add_resource(&resources, &pcie->mem);
+	pci_add_resource(&bridge->windows, &pcie->mem);
+	ret = devm_request_pci_bus_resources(dev, &bridge->windows);
+	if (ret)
+		return ret;
 
 	pcie->map_irq = iproc_pcie_bcma_map_irq;
 
-	ret = iproc_pcie_setup(pcie, &resources);
-	if (ret) {
-		dev_err(dev, "PCIe controller setup failed\n");
-		pci_free_resource_list(&resources);
-		return ret;
-	}
-
 	bcma_set_drvdata(bdev, pcie);
-	return 0;
+
+	return iproc_pcie_setup(pcie, &bridge->windows);
 }
 
 static void iproc_pcie_bcma_remove(struct bcma_device *bdev)
diff --git a/drivers/pci/controller/pcie-iproc-msi.c b/drivers/pci/controller/pcie-iproc-msi.c
index 35a82124a126..757b7fbcdc59 100644
--- a/drivers/pci/controller/pcie-iproc-msi.c
+++ b/drivers/pci/controller/pcie-iproc-msi.c
@@ -326,7 +326,6 @@ static void iproc_msi_handler(struct irq_desc *desc)
 	struct iproc_msi *msi;
 	u32 eq, head, tail, nr_events;
 	unsigned long hwirq;
-	int virq;
 
 	chained_irq_enter(chip, desc);
 
@@ -362,8 +361,7 @@ static void iproc_msi_handler(struct irq_desc *desc)
 		/* process all outstanding events */
 		while (nr_events--) {
 			hwirq = decode_msi_hwirq(msi, eq, head);
-			virq = irq_find_mapping(msi->inner_domain, hwirq);
-			generic_handle_irq(virq);
+			generic_handle_domain_irq(msi->inner_domain, hwirq);
 
 			head++;
 			head %= EQ_LEN;
diff --git a/drivers/pci/controller/pcie-mediatek-gen3.c b/drivers/pci/controller/pcie-mediatek-gen3.c
index f3aeb8d4eaca..17c59b0d6978 100644
--- a/drivers/pci/controller/pcie-mediatek-gen3.c
+++ b/drivers/pci/controller/pcie-mediatek-gen3.c
@@ -645,7 +645,6 @@ static void mtk_pcie_msi_handler(struct mtk_pcie_port *port, int set_idx)
 {
 	struct mtk_msi_set *msi_set = &port->msi_sets[set_idx];
 	unsigned long msi_enable, msi_status;
-	unsigned int virq;
 	irq_hw_number_t bit, hwirq;
 
 	msi_enable = readl_relaxed(msi_set->base + PCIE_MSI_SET_ENABLE_OFFSET);
@@ -659,8 +658,7 @@ static void mtk_pcie_msi_handler(struct mtk_pcie_port *port, int set_idx)
 
 		for_each_set_bit(bit, &msi_status, PCIE_MSI_IRQS_PER_SET) {
 			hwirq = bit + set_idx * PCIE_MSI_IRQS_PER_SET;
-			virq = irq_find_mapping(port->msi_bottom_domain, hwirq);
-			generic_handle_irq(virq);
+			generic_handle_domain_irq(port->msi_bottom_domain, hwirq);
 		}
 	} while (true);
 }
@@ -670,18 +668,15 @@ static void mtk_pcie_irq_handler(struct irq_desc *desc)
 	struct mtk_pcie_port *port = irq_desc_get_handler_data(desc);
 	struct irq_chip *irqchip = irq_desc_get_chip(desc);
 	unsigned long status;
-	unsigned int virq;
 	irq_hw_number_t irq_bit = PCIE_INTX_SHIFT;
 
 	chained_irq_enter(irqchip, desc);
 
 	status = readl_relaxed(port->base + PCIE_INT_STATUS_REG);
 	for_each_set_bit_from(irq_bit, &status, PCI_NUM_INTX +
-			      PCIE_INTX_SHIFT) {
-		virq = irq_find_mapping(port->intx_domain,
-					irq_bit - PCIE_INTX_SHIFT);
-		generic_handle_irq(virq);
-	}
+			      PCIE_INTX_SHIFT)
+		generic_handle_domain_irq(port->intx_domain,
+					  irq_bit - PCIE_INTX_SHIFT);
 
 	irq_bit = PCIE_MSI_SHIFT;
 	for_each_set_bit_from(irq_bit, &status, PCIE_MSI_SET_NUM +
diff --git a/drivers/pci/controller/pcie-mediatek.c b/drivers/pci/controller/pcie-mediatek.c
index 25bee693834f..2f3f974977a3 100644
--- a/drivers/pci/controller/pcie-mediatek.c
+++ b/drivers/pci/controller/pcie-mediatek.c
@@ -14,6 +14,7 @@
 #include <linux/irqchip/chained_irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
+#include <linux/mfd/syscon.h>
 #include <linux/msi.h>
 #include <linux/module.h>
 #include <linux/of_address.h>
@@ -23,6 +24,7 @@
 #include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
+#include <linux/regmap.h>
 #include <linux/reset.h>
 
 #include "../pci.h"
@@ -207,6 +209,7 @@ struct mtk_pcie_port {
  * struct mtk_pcie - PCIe host information
  * @dev: pointer to PCIe device
  * @base: IO mapped register base
+ * @cfg: IO mapped register map for PCIe config
  * @free_ck: free-run reference clock
  * @mem: non-prefetchable memory resource
  * @ports: pointer to PCIe port information
@@ -215,6 +218,7 @@ struct mtk_pcie_port {
 struct mtk_pcie {
 	struct device *dev;
 	void __iomem *base;
+	struct regmap *cfg;
 	struct clk *free_ck;
 
 	struct list_head ports;
@@ -602,7 +606,6 @@ static void mtk_pcie_intr_handler(struct irq_desc *desc)
 	struct mtk_pcie_port *port = irq_desc_get_handler_data(desc);
 	struct irq_chip *irqchip = irq_desc_get_chip(desc);
 	unsigned long status;
-	u32 virq;
 	u32 bit = INTX_SHIFT;
 
 	chained_irq_enter(irqchip, desc);
@@ -612,9 +615,8 @@ static void mtk_pcie_intr_handler(struct irq_desc *desc)
 		for_each_set_bit_from(bit, &status, PCI_NUM_INTX + INTX_SHIFT) {
 			/* Clear the INTx */
 			writel(1 << bit, port->base + PCIE_INT_STATUS);
-			virq = irq_find_mapping(port->irq_domain,
-						bit - INTX_SHIFT);
-			generic_handle_irq(virq);
+			generic_handle_domain_irq(port->irq_domain,
+						  bit - INTX_SHIFT);
 		}
 	}
 
@@ -623,10 +625,8 @@ static void mtk_pcie_intr_handler(struct irq_desc *desc)
 			unsigned long imsi_status;
 
 			while ((imsi_status = readl(port->base + PCIE_IMSI_STATUS))) {
-				for_each_set_bit(bit, &imsi_status, MTK_MSI_IRQS_NUM) {
-					virq = irq_find_mapping(port->inner_domain, bit);
-					generic_handle_irq(virq);
-				}
+				for_each_set_bit(bit, &imsi_status, MTK_MSI_IRQS_NUM)
+					generic_handle_domain_irq(port->inner_domain, bit);
 			}
 			/* Clear MSI interrupt status */
 			writel(MSI_STATUS, port->base + PCIE_INT_STATUS);
@@ -650,7 +650,11 @@ static int mtk_pcie_setup_irq(struct mtk_pcie_port *port,
 		return err;
 	}
 
-	port->irq = platform_get_irq(pdev, port->slot);
+	if (of_find_property(dev->of_node, "interrupt-names", NULL))
+		port->irq = platform_get_irq_byname(pdev, "pcie_irq");
+	else
+		port->irq = platform_get_irq(pdev, port->slot);
+
 	if (port->irq < 0)
 		return port->irq;
 
@@ -682,6 +686,10 @@ static int mtk_pcie_startup_port_v2(struct mtk_pcie_port *port)
 		val |= PCIE_CSR_LTSSM_EN(port->slot) |
 		       PCIE_CSR_ASPM_L1_EN(port->slot);
 		writel(val, pcie->base + PCIE_SYS_CFG_V2);
+	} else if (pcie->cfg) {
+		val = PCIE_CSR_LTSSM_EN(port->slot) |
+		      PCIE_CSR_ASPM_L1_EN(port->slot);
+		regmap_update_bits(pcie->cfg, PCIE_SYS_CFG_V2, val, val);
 	}
 
 	/* Assert all reset signals */
@@ -985,6 +993,7 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
 	struct device *dev = pcie->dev;
 	struct platform_device *pdev = to_platform_device(dev);
 	struct resource *regs;
+	struct device_node *cfg_node;
 	int err;
 
 	/* get shared registers, which are optional */
@@ -995,6 +1004,14 @@ static int mtk_pcie_subsys_powerup(struct mtk_pcie *pcie)
 			return PTR_ERR(pcie->base);
 	}
 
+	cfg_node = of_find_compatible_node(NULL, NULL,
+					   "mediatek,generic-pciecfg");
+	if (cfg_node) {
+		pcie->cfg = syscon_node_to_regmap(cfg_node);
+		if (IS_ERR(pcie->cfg))
+			return PTR_ERR(pcie->cfg);
+	}
+
 	pcie->free_ck = devm_clk_get(dev, "free_ck");
 	if (IS_ERR(pcie->free_ck)) {
 		if (PTR_ERR(pcie->free_ck) == -EPROBE_DEFER)
@@ -1027,22 +1044,27 @@ static int mtk_pcie_setup(struct mtk_pcie *pcie)
 	struct device *dev = pcie->dev;
 	struct device_node *node = dev->of_node, *child;
 	struct mtk_pcie_port *port, *tmp;
-	int err;
+	int err, slot;
+
+	slot = of_get_pci_domain_nr(dev->of_node);
+	if (slot < 0) {
+		for_each_available_child_of_node(node, child) {
+			err = of_pci_get_devfn(child);
+			if (err < 0) {
+				dev_err(dev, "failed to get devfn: %d\n", err);
+				goto error_put_node;
+			}
 
-	for_each_available_child_of_node(node, child) {
-		int slot;
+			slot = PCI_SLOT(err);
 
-		err = of_pci_get_devfn(child);
-		if (err < 0) {
-			dev_err(dev, "failed to parse devfn: %d\n", err);
-			goto error_put_node;
+			err = mtk_pcie_parse_port(pcie, child, slot);
+			if (err)
+				goto error_put_node;
 		}
-
-		slot = PCI_SLOT(err);
-
-		err = mtk_pcie_parse_port(pcie, child, slot);
+	} else {
+		err = mtk_pcie_parse_port(pcie, node, slot);
 		if (err)
-			goto error_put_node;
+			return err;
 	}
 
 	err = mtk_pcie_subsys_powerup(pcie);
diff --git a/drivers/pci/controller/pcie-microchip-host.c b/drivers/pci/controller/pcie-microchip-host.c
index fdab8202ae5d..329f930d17aa 100644
--- a/drivers/pci/controller/pcie-microchip-host.c
+++ b/drivers/pci/controller/pcie-microchip-host.c
@@ -412,16 +412,14 @@ static void mc_handle_msi(struct irq_desc *desc)
 		port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
+	int ret;
 
 	status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
 	if (status & PM_MSI_INT_MSI_MASK) {
 		status = readl_relaxed(bridge_base_addr + ISTATUS_MSI);
 		for_each_set_bit(bit, &status, msi->num_vectors) {
-			virq = irq_find_mapping(msi->dev_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-			else
+			ret = generic_handle_domain_irq(msi->dev_domain, bit);
+			if (ret)
 				dev_err_ratelimited(dev, "bad MSI IRQ %d\n",
 						    bit);
 		}
@@ -570,17 +568,15 @@ static void mc_handle_intx(struct irq_desc *desc)
 		port->axi_base_addr + MC_PCIE_BRIDGE_ADDR;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
+	int ret;
 
 	status = readl_relaxed(bridge_base_addr + ISTATUS_LOCAL);
 	if (status & PM_MSI_INT_INTX_MASK) {
 		status &= PM_MSI_INT_INTX_MASK;
 		status >>= PM_MSI_INT_INTX_SHIFT;
 		for_each_set_bit(bit, &status, PCI_NUM_INTX) {
-			virq = irq_find_mapping(port->intx_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-			else
+			ret = generic_handle_domain_irq(port->intx_domain, bit);
+			if (ret)
 				dev_err_ratelimited(dev, "bad INTx IRQ %d\n",
 						    bit);
 		}
@@ -745,7 +741,7 @@ static void mc_handle_event(struct irq_desc *desc)
 	events = get_events(port);
 
 	for_each_set_bit(bit, &events, NUM_EVENTS)
-		generic_handle_irq(irq_find_mapping(port->event_domain, bit));
+		generic_handle_domain_irq(port->event_domain, bit);
 
 	chained_irq_exit(chip, desc);
 }
diff --git a/drivers/pci/controller/pcie-rcar-ep.c b/drivers/pci/controller/pcie-rcar-ep.c
index b4a288e24aaf..aa1cf24a5a72 100644
--- a/drivers/pci/controller/pcie-rcar-ep.c
+++ b/drivers/pci/controller/pcie-rcar-ep.c
@@ -159,7 +159,7 @@ static int rcar_pcie_ep_get_pdata(struct rcar_pcie_endpoint *ep,
 	return 0;
 }
 
-static int rcar_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
+static int rcar_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
 				     struct pci_epf_header *hdr)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
@@ -195,7 +195,7 @@ static int rcar_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static int rcar_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
+static int rcar_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				struct pci_epf_bar *epf_bar)
 {
 	int flags = epf_bar->flags | LAR_ENABLE | LAM_64BIT;
@@ -246,7 +246,7 @@ static int rcar_pcie_ep_set_bar(struct pci_epc *epc, u8 func_no,
 	return 0;
 }
 
-static void rcar_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
+static void rcar_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 				   struct pci_epf_bar *epf_bar)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
@@ -259,7 +259,8 @@ static void rcar_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
 	clear_bit(atu_index + 1, ep->ib_window_map);
 }
 
-static int rcar_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 interrupts)
+static int rcar_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 vfn,
+				u8 interrupts)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
 	struct rcar_pcie *pcie = &ep->pcie;
@@ -272,7 +273,7 @@ static int rcar_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 interrupts)
 	return 0;
 }
 
-static int rcar_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
+static int rcar_pcie_ep_get_msi(struct pci_epc *epc, u8 fn, u8 vfn)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
 	struct rcar_pcie *pcie = &ep->pcie;
@@ -285,7 +286,7 @@ static int rcar_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
 	return ((flags & MSICAP0_MMESE_MASK) >> MSICAP0_MMESE_OFFSET);
 }
 
-static int rcar_pcie_ep_map_addr(struct pci_epc *epc, u8 fn,
+static int rcar_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 				 phys_addr_t addr, u64 pci_addr, size_t size)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
@@ -322,7 +323,7 @@ static int rcar_pcie_ep_map_addr(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static void rcar_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
+static void rcar_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 				    phys_addr_t addr)
 {
 	struct rcar_pcie_endpoint *ep = epc_get_drvdata(epc);
@@ -403,7 +404,7 @@ static int rcar_pcie_ep_assert_msi(struct rcar_pcie *pcie,
 	return 0;
 }
 
-static int rcar_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn,
+static int rcar_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn, u8 vfn,
 				  enum pci_epc_irq_type type,
 				  u16 interrupt_num)
 {
@@ -451,7 +452,7 @@ static const struct pci_epc_features rcar_pcie_epc_features = {
 };
 
 static const struct pci_epc_features*
-rcar_pcie_ep_get_features(struct pci_epc *epc, u8 func_no)
+rcar_pcie_ep_get_features(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	return &rcar_pcie_epc_features;
 }
@@ -492,9 +493,9 @@ static int rcar_pcie_ep_probe(struct platform_device *pdev)
 	pcie->dev = dev;
 
 	pm_runtime_enable(dev);
-	err = pm_runtime_get_sync(dev);
+	err = pm_runtime_resume_and_get(dev);
 	if (err < 0) {
-		dev_err(dev, "pm_runtime_get_sync failed\n");
+		dev_err(dev, "pm_runtime_resume_and_get failed\n");
 		goto err_pm_disable;
 	}
 
diff --git a/drivers/pci/controller/pcie-rcar-host.c b/drivers/pci/controller/pcie-rcar-host.c
index 765cf2b45e24..8f3131844e77 100644
--- a/drivers/pci/controller/pcie-rcar-host.c
+++ b/drivers/pci/controller/pcie-rcar-host.c
@@ -13,12 +13,14 @@
 
 #include <linux/bitops.h>
 #include <linux/clk.h>
+#include <linux/clk-provider.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/irqdomain.h>
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/iopoll.h>
 #include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
@@ -41,6 +43,21 @@ struct rcar_msi {
 	int irq2;
 };
 
+#ifdef CONFIG_ARM
+/*
+ * Here we keep a static copy of the remapped PCIe controller address.
+ * This is only used on aarch32 systems, all of which have one single
+ * PCIe controller, to provide quick access to the PCIe controller in
+ * the L1 link state fixup function, called from the ARM fault handler.
+ */
+static void __iomem *pcie_base;
+/*
+ * Static copy of bus clock pointer, so we can check whether the clock
+ * is enabled or not.
+ */
+static struct clk *pcie_bus_clk;
+#endif
+
 /* Structure representing the PCIe interface */
 struct rcar_pcie_host {
 	struct rcar_pcie	pcie;
@@ -486,12 +503,10 @@ static irqreturn_t rcar_pcie_msi_irq(int irq, void *data)
 
 	while (reg) {
 		unsigned int index = find_first_bit(&reg, 32);
-		unsigned int msi_irq;
+		int ret;
 
-		msi_irq = irq_find_mapping(msi->domain->parent, index);
-		if (msi_irq) {
-			generic_handle_irq(msi_irq);
-		} else {
+		ret = generic_handle_domain_irq(msi->domain->parent, index);
+		if (ret) {
 			/* Unknown MSI, just clear it */
 			dev_dbg(dev, "unexpected MSI\n");
 			rcar_pci_write_reg(pcie, BIT(index), PCIEMSIFR);
@@ -776,6 +791,12 @@ static int rcar_pcie_get_resources(struct rcar_pcie_host *host)
 	}
 	host->msi.irq2 = i;
 
+#ifdef CONFIG_ARM
+	/* Cache static copy for L1 link state fixup hook on aarch32 */
+	pcie_base = pcie->base;
+	pcie_bus_clk = host->bus_clk;
+#endif
+
 	return 0;
 
 err_irq2:
@@ -1031,4 +1052,67 @@ static struct platform_driver rcar_pcie_driver = {
 	},
 	.probe = rcar_pcie_probe,
 };
+
+#ifdef CONFIG_ARM
+static DEFINE_SPINLOCK(pmsr_lock);
+static int rcar_pcie_aarch32_abort_handler(unsigned long addr,
+		unsigned int fsr, struct pt_regs *regs)
+{
+	unsigned long flags;
+	u32 pmsr, val;
+	int ret = 0;
+
+	spin_lock_irqsave(&pmsr_lock, flags);
+
+	if (!pcie_base || !__clk_is_enabled(pcie_bus_clk)) {
+		ret = 1;
+		goto unlock_exit;
+	}
+
+	pmsr = readl(pcie_base + PMSR);
+
+	/*
+	 * Test if the PCIe controller received PM_ENTER_L1 DLLP and
+	 * the PCIe controller is not in L1 link state. If true, apply
+	 * fix, which will put the controller into L1 link state, from
+	 * which it can return to L0s/L0 on its own.
+	 */
+	if ((pmsr & PMEL1RX) && ((pmsr & PMSTATE) != PMSTATE_L1)) {
+		writel(L1IATN, pcie_base + PMCTLR);
+		ret = readl_poll_timeout_atomic(pcie_base + PMSR, val,
+						val & L1FAEG, 10, 1000);
+		WARN(ret, "Timeout waiting for L1 link state, ret=%d\n", ret);
+		writel(L1FAEG | PMEL1RX, pcie_base + PMSR);
+	}
+
+unlock_exit:
+	spin_unlock_irqrestore(&pmsr_lock, flags);
+	return ret;
+}
+
+static const struct of_device_id rcar_pcie_abort_handler_of_match[] __initconst = {
+	{ .compatible = "renesas,pcie-r8a7779" },
+	{ .compatible = "renesas,pcie-r8a7790" },
+	{ .compatible = "renesas,pcie-r8a7791" },
+	{ .compatible = "renesas,pcie-rcar-gen2" },
+	{},
+};
+
+static int __init rcar_pcie_init(void)
+{
+	if (of_find_matching_node(NULL, rcar_pcie_abort_handler_of_match)) {
+#ifdef CONFIG_ARM_LPAE
+		hook_fault_code(17, rcar_pcie_aarch32_abort_handler, SIGBUS, 0,
+				"asynchronous external abort");
+#else
+		hook_fault_code(22, rcar_pcie_aarch32_abort_handler, SIGBUS, 0,
+				"imprecise external abort");
+#endif
+	}
+
+	return platform_driver_register(&rcar_pcie_driver);
+}
+device_initcall(rcar_pcie_init);
+#else
 builtin_platform_driver(rcar_pcie_driver);
+#endif
diff --git a/drivers/pci/controller/pcie-rcar.h b/drivers/pci/controller/pcie-rcar.h
index d4c698b5f821..9bb125db85c6 100644
--- a/drivers/pci/controller/pcie-rcar.h
+++ b/drivers/pci/controller/pcie-rcar.h
@@ -85,6 +85,13 @@
 #define  LTSMDIS		BIT(31)
 #define  MACCTLR_INIT_VAL	(LTSMDIS | MACCTLR_NFTS_MASK)
 #define PMSR			0x01105c
+#define  L1FAEG			BIT(31)
+#define  PMEL1RX		BIT(23)
+#define  PMSTATE		GENMASK(18, 16)
+#define  PMSTATE_L1		(3 << 16)
+#define PMCTLR			0x011060
+#define  L1IATN			BIT(31)
+
 #define MACS2R			0x011078
 #define MACCGSPSETR		0x011084
 #define  SPCNGRSN		BIT(31)
diff --git a/drivers/pci/controller/pcie-rockchip-ep.c b/drivers/pci/controller/pcie-rockchip-ep.c
index 7631dc3961c1..5fb9ce6e536e 100644
--- a/drivers/pci/controller/pcie-rockchip-ep.c
+++ b/drivers/pci/controller/pcie-rockchip-ep.c
@@ -122,7 +122,7 @@ static void rockchip_pcie_prog_ep_ob_atu(struct rockchip_pcie *rockchip, u8 fn,
 			    ROCKCHIP_PCIE_AT_OB_REGION_CPU_ADDR1(r));
 }
 
-static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
+static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn, u8 vfn,
 					 struct pci_epf_header *hdr)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
@@ -159,7 +159,7 @@ static int rockchip_pcie_ep_write_header(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static int rockchip_pcie_ep_set_bar(struct pci_epc *epc, u8 fn,
+static int rockchip_pcie_ep_set_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 				    struct pci_epf_bar *epf_bar)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
@@ -227,7 +227,7 @@ static int rockchip_pcie_ep_set_bar(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static void rockchip_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
+static void rockchip_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn, u8 vfn,
 				       struct pci_epf_bar *epf_bar)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
@@ -256,7 +256,7 @@ static void rockchip_pcie_ep_clear_bar(struct pci_epc *epc, u8 fn,
 			    ROCKCHIP_PCIE_AT_IB_EP_FUNC_BAR_ADDR1(fn, bar));
 }
 
-static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn,
+static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 				     phys_addr_t addr, u64 pci_addr,
 				     size_t size)
 {
@@ -284,7 +284,7 @@ static int rockchip_pcie_ep_map_addr(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static void rockchip_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
+static void rockchip_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn, u8 vfn,
 					phys_addr_t addr)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
@@ -308,7 +308,7 @@ static void rockchip_pcie_ep_unmap_addr(struct pci_epc *epc, u8 fn,
 	clear_bit(r, &ep->ob_region_map);
 }
 
-static int rockchip_pcie_ep_set_msi(struct pci_epc *epc, u8 fn,
+static int rockchip_pcie_ep_set_msi(struct pci_epc *epc, u8 fn, u8 vfn,
 				    u8 multi_msg_cap)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
@@ -329,7 +329,7 @@ static int rockchip_pcie_ep_set_msi(struct pci_epc *epc, u8 fn,
 	return 0;
 }
 
-static int rockchip_pcie_ep_get_msi(struct pci_epc *epc, u8 fn)
+static int rockchip_pcie_ep_get_msi(struct pci_epc *epc, u8 fn, u8 vfn)
 {
 	struct rockchip_pcie_ep *ep = epc_get_drvdata(epc);
 	struct rockchip_pcie *rockchip = &ep->rockchip;
@@ -471,7 +471,7 @@ static int rockchip_pcie_ep_send_msi_irq(struct rockchip_pcie_ep *ep, u8 fn,
 	return 0;
 }
 
-static int rockchip_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn,
+static int rockchip_pcie_ep_raise_irq(struct pci_epc *epc, u8 fn, u8 vfn,
 				      enum pci_epc_irq_type type,
 				      u16 interrupt_num)
 {
@@ -510,7 +510,7 @@ static const struct pci_epc_features rockchip_pcie_epc_features = {
 };
 
 static const struct pci_epc_features*
-rockchip_pcie_ep_get_features(struct pci_epc *epc, u8 func_no)
+rockchip_pcie_ep_get_features(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	return &rockchip_pcie_epc_features;
 }
diff --git a/drivers/pci/controller/pcie-rockchip-host.c b/drivers/pci/controller/pcie-rockchip-host.c
index 78d04ac29cd5..c52316d0bfd2 100644
--- a/drivers/pci/controller/pcie-rockchip-host.c
+++ b/drivers/pci/controller/pcie-rockchip-host.c
@@ -517,7 +517,7 @@ static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc)
 	struct device *dev = rockchip->dev;
 	u32 reg;
 	u32 hwirq;
-	u32 virq;
+	int ret;
 
 	chained_irq_enter(chip, desc);
 
@@ -528,10 +528,8 @@ static void rockchip_pcie_legacy_int_handler(struct irq_desc *desc)
 		hwirq = ffs(reg) - 1;
 		reg &= ~BIT(hwirq);
 
-		virq = irq_find_mapping(rockchip->irq_domain, hwirq);
-		if (virq)
-			generic_handle_irq(virq);
-		else
+		ret = generic_handle_domain_irq(rockchip->irq_domain, hwirq);
+		if (ret)
 			dev_err(dev, "unexpected IRQ, INT%d\n", hwirq);
 	}
 
diff --git a/drivers/pci/controller/pcie-xilinx-cpm.c b/drivers/pci/controller/pcie-xilinx-cpm.c
index 67937facd90c..95426df03200 100644
--- a/drivers/pci/controller/pcie-xilinx-cpm.c
+++ b/drivers/pci/controller/pcie-xilinx-cpm.c
@@ -222,7 +222,7 @@ static void xilinx_cpm_pcie_intx_flow(struct irq_desc *desc)
 			pcie_read(port, XILINX_CPM_PCIE_REG_IDRN));
 
 	for_each_set_bit(i, &val, PCI_NUM_INTX)
-		generic_handle_irq(irq_find_mapping(port->intx_domain, i));
+		generic_handle_domain_irq(port->intx_domain, i);
 
 	chained_irq_exit(chip, desc);
 }
@@ -282,7 +282,7 @@ static void xilinx_cpm_pcie_event_flow(struct irq_desc *desc)
 	val =  pcie_read(port, XILINX_CPM_PCIE_REG_IDR);
 	val &= pcie_read(port, XILINX_CPM_PCIE_REG_IMR);
 	for_each_set_bit(i, &val, 32)
-		generic_handle_irq(irq_find_mapping(port->cpm_domain, i));
+		generic_handle_domain_irq(port->cpm_domain, i);
 	pcie_write(port, val, XILINX_CPM_PCIE_REG_IDR);
 
 	/*
diff --git a/drivers/pci/controller/pcie-xilinx-nwl.c b/drivers/pci/controller/pcie-xilinx-nwl.c
index 8689311c5ef6..a72b4f9a2b00 100644
--- a/drivers/pci/controller/pcie-xilinx-nwl.c
+++ b/drivers/pci/controller/pcie-xilinx-nwl.c
@@ -6,6 +6,7 @@
  * (C) Copyright 2014 - 2015, Xilinx, Inc.
  */
 
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/interrupt.h>
 #include <linux/irq.h>
@@ -169,6 +170,7 @@ struct nwl_pcie {
 	u8 last_busno;
 	struct nwl_msi msi;
 	struct irq_domain *legacy_irq_domain;
+	struct clk *clk;
 	raw_spinlock_t leg_mask_lock;
 };
 
@@ -318,18 +320,14 @@ static void nwl_pcie_leg_handler(struct irq_desc *desc)
 	struct nwl_pcie *pcie;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
 
 	chained_irq_enter(chip, desc);
 	pcie = irq_desc_get_handler_data(desc);
 
 	while ((status = nwl_bridge_readl(pcie, MSGF_LEG_STATUS) &
 				MSGF_LEG_SR_MASKALL) != 0) {
-		for_each_set_bit(bit, &status, PCI_NUM_INTX) {
-			virq = irq_find_mapping(pcie->legacy_irq_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
-		}
+		for_each_set_bit(bit, &status, PCI_NUM_INTX)
+			generic_handle_domain_irq(pcie->legacy_irq_domain, bit);
 	}
 
 	chained_irq_exit(chip, desc);
@@ -340,16 +338,13 @@ static void nwl_pcie_handle_msi_irq(struct nwl_pcie *pcie, u32 status_reg)
 	struct nwl_msi *msi;
 	unsigned long status;
 	u32 bit;
-	u32 virq;
 
 	msi = &pcie->msi;
 
 	while ((status = nwl_bridge_readl(pcie, status_reg)) != 0) {
 		for_each_set_bit(bit, &status, 32) {
 			nwl_bridge_writel(pcie, 1 << bit, status_reg);
-			virq = irq_find_mapping(msi->dev_domain, bit);
-			if (virq)
-				generic_handle_irq(virq);
+			generic_handle_domain_irq(msi->dev_domain, bit);
 		}
 	}
 }
@@ -823,6 +818,16 @@ static int nwl_pcie_probe(struct platform_device *pdev)
 		return err;
 	}
 
+	pcie->clk = devm_clk_get(dev, NULL);
+	if (IS_ERR(pcie->clk))
+		return PTR_ERR(pcie->clk);
+
+	err = clk_prepare_enable(pcie->clk);
+	if (err) {
+		dev_err(dev, "can't enable PCIe ref clock\n");
+		return err;
+	}
+
 	err = nwl_pcie_bridge_init(pcie);
 	if (err) {
 		dev_err(dev, "HW Initialization failed\n");
diff --git a/drivers/pci/controller/pcie-xilinx.c b/drivers/pci/controller/pcie-xilinx.c
index 14001febf59a..aa9bdcebc838 100644
--- a/drivers/pci/controller/pcie-xilinx.c
+++ b/drivers/pci/controller/pcie-xilinx.c
@@ -385,7 +385,7 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
 	}
 
 	if (status & (XILINX_PCIE_INTR_INTX | XILINX_PCIE_INTR_MSI)) {
-		unsigned int irq;
+		struct irq_domain *domain;
 
 		val = pcie_read(port, XILINX_PCIE_REG_RPIFR1);
 
@@ -399,19 +399,18 @@ static irqreturn_t xilinx_pcie_intr_handler(int irq, void *data)
 		if (val & XILINX_PCIE_RPIFR1_MSI_INTR) {
 			val = pcie_read(port, XILINX_PCIE_REG_RPIFR2) &
 				XILINX_PCIE_RPIFR2_MSG_DATA;
-			irq = irq_find_mapping(port->msi_domain->parent, val);
+			domain = port->msi_domain->parent;
 		} else {
 			val = (val & XILINX_PCIE_RPIFR1_INTR_MASK) >>
 				XILINX_PCIE_RPIFR1_INTR_SHIFT;
-			irq = irq_find_mapping(port->leg_domain, val);
+			domain = port->leg_domain;
 		}
 
 		/* Clear interrupt FIFO register 1 */
 		pcie_write(port, XILINX_PCIE_RPIFR1_ALL_MASK,
 			   XILINX_PCIE_REG_RPIFR1);
 
-		if (irq)
-			generic_handle_irq(irq);
+		generic_handle_domain_irq(domain, val);
 	}
 
 	if (status & XILINX_PCIE_INTR_SLV_UNSUPP)
diff --git a/drivers/pci/controller/vmd.c b/drivers/pci/controller/vmd.c
index e3fcdfec58b3..a5987e52700e 100644
--- a/drivers/pci/controller/vmd.c
+++ b/drivers/pci/controller/vmd.c
@@ -11,6 +11,7 @@
 #include <linux/module.h>
 #include <linux/msi.h>
 #include <linux/pci.h>
+#include <linux/pci-acpi.h>
 #include <linux/pci-ecam.h>
 #include <linux/srcu.h>
 #include <linux/rculist.h>
@@ -447,6 +448,56 @@ static struct pci_ops vmd_ops = {
 	.write		= vmd_pci_write,
 };
 
+#ifdef CONFIG_ACPI
+static struct acpi_device *vmd_acpi_find_companion(struct pci_dev *pci_dev)
+{
+	struct pci_host_bridge *bridge;
+	u32 busnr, addr;
+
+	if (pci_dev->bus->ops != &vmd_ops)
+		return NULL;
+
+	bridge = pci_find_host_bridge(pci_dev->bus);
+	busnr = pci_dev->bus->number - bridge->bus->number;
+	/*
+	 * The address computation below is only applicable to relative bus
+	 * numbers below 32.
+	 */
+	if (busnr > 31)
+		return NULL;
+
+	addr = (busnr << 24) | ((u32)pci_dev->devfn << 16) | 0x8000FFFFU;
+
+	dev_dbg(&pci_dev->dev, "Looking for ACPI companion (address 0x%x)\n",
+		addr);
+
+	return acpi_find_child_device(ACPI_COMPANION(bridge->dev.parent), addr,
+				      false);
+}
+
+static bool hook_installed;
+
+static void vmd_acpi_begin(void)
+{
+	if (pci_acpi_set_companion_lookup_hook(vmd_acpi_find_companion))
+		return;
+
+	hook_installed = true;
+}
+
+static void vmd_acpi_end(void)
+{
+	if (!hook_installed)
+		return;
+
+	pci_acpi_clear_companion_lookup_hook();
+	hook_installed = false;
+}
+#else
+static inline void vmd_acpi_begin(void) { }
+static inline void vmd_acpi_end(void) { }
+#endif /* CONFIG_ACPI */
+
 static void vmd_attach_resources(struct vmd_dev *vmd)
 {
 	vmd->dev->resource[VMD_MEMBAR1].child = &vmd->resources[1];
@@ -747,6 +798,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 	if (vmd->irq_domain)
 		dev_set_msi_domain(&vmd->bus->dev, vmd->irq_domain);
 
+	vmd_acpi_begin();
+
 	pci_scan_child_bus(vmd->bus);
 	pci_assign_unassigned_bus_resources(vmd->bus);
 
@@ -760,6 +813,8 @@ static int vmd_enable_domain(struct vmd_dev *vmd, unsigned long features)
 
 	pci_bus_add_devices(vmd->bus);
 
+	vmd_acpi_end();
+
 	WARN(sysfs_create_link(&vmd->dev->dev.kobj, &vmd->bus->dev.kobj,
 			       "domain"), "Can't create symlink to domain\n");
 	return 0;
diff --git a/drivers/pci/endpoint/functions/pci-epf-ntb.c b/drivers/pci/endpoint/functions/pci-epf-ntb.c
index bce274d02dcf..8b4756159f15 100644
--- a/drivers/pci/endpoint/functions/pci-epf-ntb.c
+++ b/drivers/pci/endpoint/functions/pci-epf-ntb.c
@@ -87,6 +87,7 @@ struct epf_ntb {
 
 struct epf_ntb_epc {
 	u8 func_no;
+	u8 vfunc_no;
 	bool linkup;
 	bool is_msix;
 	int msix_bar;
@@ -143,14 +144,15 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
 	struct epf_ntb_epc *ntb_epc;
 	struct epf_ntb_ctrl *ctrl;
 	struct pci_epc *epc;
+	u8 func_no, vfunc_no;
 	bool is_msix;
-	u8 func_no;
 	int ret;
 
 	for (type = PRIMARY_INTERFACE; type <= SECONDARY_INTERFACE; type++) {
 		ntb_epc = ntb->epc[type];
 		epc = ntb_epc->epc;
 		func_no = ntb_epc->func_no;
+		vfunc_no = ntb_epc->vfunc_no;
 		is_msix = ntb_epc->is_msix;
 		ctrl = ntb_epc->reg;
 		if (link_up)
@@ -158,7 +160,7 @@ static int epf_ntb_link_up(struct epf_ntb *ntb, bool link_up)
 		else
 			ctrl->link_status &= ~LINK_STATUS_UP;
 		irq_type = is_msix ? PCI_EPC_IRQ_MSIX : PCI_EPC_IRQ_MSI;
-		ret = pci_epc_raise_irq(epc, func_no, irq_type, 1);
+		ret = pci_epc_raise_irq(epc, func_no, vfunc_no, irq_type, 1);
 		if (ret) {
 			dev_err(&epc->dev,
 				"%s intf: Failed to raise Link Up IRQ\n",
@@ -238,10 +240,10 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb,
 	enum pci_barno peer_barno;
 	struct epf_ntb_ctrl *ctrl;
 	phys_addr_t phys_addr;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	u64 addr, size;
 	int ret = 0;
-	u8 func_no;
 
 	ntb_epc = ntb->epc[type];
 	epc = ntb_epc->epc;
@@ -267,8 +269,9 @@ static int epf_ntb_configure_mw(struct epf_ntb *ntb,
 	}
 
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
-	ret = pci_epc_map_addr(epc, func_no, phys_addr, addr, size);
+	ret = pci_epc_map_addr(epc, func_no, vfunc_no, phys_addr, addr, size);
 	if (ret)
 		dev_err(&epc->dev,
 			"%s intf: Failed to map memory window %d address\n",
@@ -296,8 +299,8 @@ static void epf_ntb_teardown_mw(struct epf_ntb *ntb,
 	enum pci_barno peer_barno;
 	struct epf_ntb_ctrl *ctrl;
 	phys_addr_t phys_addr;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 
 	ntb_epc = ntb->epc[type];
 	epc = ntb_epc->epc;
@@ -311,8 +314,9 @@ static void epf_ntb_teardown_mw(struct epf_ntb *ntb,
 	if (mw + NTB_MW_OFFSET == BAR_DB_MW1)
 		phys_addr += ctrl->mw1_offset;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
-	pci_epc_unmap_addr(epc, func_no, phys_addr);
+	pci_epc_unmap_addr(epc, func_no, vfunc_no, phys_addr);
 }
 
 /**
@@ -385,8 +389,8 @@ static int epf_ntb_configure_msi(struct epf_ntb *ntb,
 	struct epf_ntb_ctrl *peer_ctrl;
 	enum pci_barno peer_barno;
 	phys_addr_t phys_addr;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 	int ret, i;
 
 	ntb_epc = ntb->epc[type];
@@ -400,8 +404,9 @@ static int epf_ntb_configure_msi(struct epf_ntb *ntb,
 
 	phys_addr = peer_epf_bar->phys_addr;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
-	ret = pci_epc_map_msi_irq(epc, func_no, phys_addr, db_count,
+	ret = pci_epc_map_msi_irq(epc, func_no, vfunc_no, phys_addr, db_count,
 				  db_entry_size, &db_data, &db_offset);
 	if (ret) {
 		dev_err(&epc->dev, "%s intf: Failed to map MSI IRQ\n",
@@ -491,10 +496,10 @@ static int epf_ntb_configure_msix(struct epf_ntb *ntb,
 	u32 db_entry_size, msg_data;
 	enum pci_barno peer_barno;
 	phys_addr_t phys_addr;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	size_t align;
 	u64 msg_addr;
-	u8 func_no;
 	int ret, i;
 
 	ntb_epc = ntb->epc[type];
@@ -512,12 +517,13 @@ static int epf_ntb_configure_msix(struct epf_ntb *ntb,
 	align = epc_features->align;
 
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	db_entry_size = peer_ctrl->db_entry_size;
 
 	for (i = 0; i < db_count; i++) {
 		msg_addr = ALIGN_DOWN(msix_tbl[i].msg_addr, align);
 		msg_data = msix_tbl[i].msg_data;
-		ret = pci_epc_map_addr(epc, func_no, phys_addr, msg_addr,
+		ret = pci_epc_map_addr(epc, func_no, vfunc_no, phys_addr, msg_addr,
 				       db_entry_size);
 		if (ret) {
 			dev_err(&epc->dev,
@@ -586,8 +592,8 @@ epf_ntb_teardown_db(struct epf_ntb *ntb, enum pci_epc_interface_type type)
 	struct pci_epf_bar *peer_epf_bar;
 	enum pci_barno peer_barno;
 	phys_addr_t phys_addr;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 
 	ntb_epc = ntb->epc[type];
 	epc = ntb_epc->epc;
@@ -597,8 +603,9 @@ epf_ntb_teardown_db(struct epf_ntb *ntb, enum pci_epc_interface_type type)
 	peer_epf_bar = &peer_ntb_epc->epf_bar[peer_barno];
 	phys_addr = peer_epf_bar->phys_addr;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
-	pci_epc_unmap_addr(epc, func_no, phys_addr);
+	pci_epc_unmap_addr(epc, func_no, vfunc_no, phys_addr);
 }
 
 /**
@@ -728,14 +735,15 @@ static void epf_ntb_peer_spad_bar_clear(struct epf_ntb_epc *ntb_epc)
 {
 	struct pci_epf_bar *epf_bar;
 	enum pci_barno barno;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 
 	epc = ntb_epc->epc;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
 	epf_bar = &ntb_epc->epf_bar[barno];
-	pci_epc_clear_bar(epc, func_no, epf_bar);
+	pci_epc_clear_bar(epc, func_no, vfunc_no, epf_bar);
 }
 
 /**
@@ -775,9 +783,9 @@ static int epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb,
 	struct pci_epf_bar *peer_epf_bar, *epf_bar;
 	enum pci_barno peer_barno, barno;
 	u32 peer_spad_offset;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	struct device *dev;
-	u8 func_no;
 	int ret;
 
 	dev = &ntb->epf->dev;
@@ -790,6 +798,7 @@ static int epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb,
 	barno = ntb_epc->epf_ntb_bar[BAR_PEER_SPAD];
 	epf_bar = &ntb_epc->epf_bar[barno];
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	epc = ntb_epc->epc;
 
 	peer_spad_offset = peer_ntb_epc->reg->spad_offset;
@@ -798,7 +807,7 @@ static int epf_ntb_peer_spad_bar_set(struct epf_ntb *ntb,
 	epf_bar->barno = barno;
 	epf_bar->flags = PCI_BASE_ADDRESS_MEM_TYPE_32;
 
-	ret = pci_epc_set_bar(epc, func_no, epf_bar);
+	ret = pci_epc_set_bar(epc, func_no, vfunc_no, epf_bar);
 	if (ret) {
 		dev_err(dev, "%s intf: peer SPAD BAR set failed\n",
 			pci_epc_interface_string(type));
@@ -842,14 +851,15 @@ static void epf_ntb_config_sspad_bar_clear(struct epf_ntb_epc *ntb_epc)
 {
 	struct pci_epf_bar *epf_bar;
 	enum pci_barno barno;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 
 	epc = ntb_epc->epc;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
 	epf_bar = &ntb_epc->epf_bar[barno];
-	pci_epc_clear_bar(epc, func_no, epf_bar);
+	pci_epc_clear_bar(epc, func_no, vfunc_no, epf_bar);
 }
 
 /**
@@ -886,10 +896,10 @@ static int epf_ntb_config_sspad_bar_set(struct epf_ntb_epc *ntb_epc)
 {
 	struct pci_epf_bar *epf_bar;
 	enum pci_barno barno;
+	u8 func_no, vfunc_no;
 	struct epf_ntb *ntb;
 	struct pci_epc *epc;
 	struct device *dev;
-	u8 func_no;
 	int ret;
 
 	ntb = ntb_epc->epf_ntb;
@@ -897,10 +907,11 @@ static int epf_ntb_config_sspad_bar_set(struct epf_ntb_epc *ntb_epc)
 
 	epc = ntb_epc->epc;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	barno = ntb_epc->epf_ntb_bar[BAR_CONFIG];
 	epf_bar = &ntb_epc->epf_bar[barno];
 
-	ret = pci_epc_set_bar(epc, func_no, epf_bar);
+	ret = pci_epc_set_bar(epc, func_no, vfunc_no, epf_bar);
 	if (ret) {
 		dev_err(dev, "%s inft: Config/Status/SPAD BAR set failed\n",
 			pci_epc_interface_string(ntb_epc->type));
@@ -1214,17 +1225,18 @@ static void epf_ntb_db_mw_bar_clear(struct epf_ntb_epc *ntb_epc)
 	struct pci_epf_bar *epf_bar;
 	enum epf_ntb_bar bar;
 	enum pci_barno barno;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
-	u8 func_no;
 
 	epc = ntb_epc->epc;
 
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
 	for (bar = BAR_DB_MW1; bar < BAR_MW4; bar++) {
 		barno = ntb_epc->epf_ntb_bar[bar];
 		epf_bar = &ntb_epc->epf_bar[barno];
-		pci_epc_clear_bar(epc, func_no, epf_bar);
+		pci_epc_clear_bar(epc, func_no, vfunc_no, epf_bar);
 	}
 }
 
@@ -1263,10 +1275,10 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
 	const struct pci_epc_features *epc_features;
 	bool msix_capable, msi_capable;
 	struct epf_ntb_epc *ntb_epc;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	struct device *dev;
 	u32 db_count;
-	u8 func_no;
 	int ret;
 
 	ntb_epc = ntb->epc[type];
@@ -1282,6 +1294,7 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
 	}
 
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
 	db_count = ntb->db_count;
 	if (db_count > MAX_DB_COUNT) {
@@ -1293,7 +1306,7 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
 	epc = ntb_epc->epc;
 
 	if (msi_capable) {
-		ret = pci_epc_set_msi(epc, func_no, db_count);
+		ret = pci_epc_set_msi(epc, func_no, vfunc_no, db_count);
 		if (ret) {
 			dev_err(dev, "%s intf: MSI configuration failed\n",
 				pci_epc_interface_string(type));
@@ -1302,7 +1315,7 @@ static int epf_ntb_configure_interrupt(struct epf_ntb *ntb,
 	}
 
 	if (msix_capable) {
-		ret = pci_epc_set_msix(epc, func_no, db_count,
+		ret = pci_epc_set_msix(epc, func_no, vfunc_no, db_count,
 				       ntb_epc->msix_bar,
 				       ntb_epc->msix_table_offset);
 		if (ret) {
@@ -1423,11 +1436,11 @@ static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb,
 	u32 num_mws, db_count;
 	enum epf_ntb_bar bar;
 	enum pci_barno barno;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	struct device *dev;
 	size_t align;
 	int ret, i;
-	u8 func_no;
 	u64 size;
 
 	ntb_epc = ntb->epc[type];
@@ -1437,6 +1450,7 @@ static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb,
 	epc_features = ntb_epc->epc_features;
 	align = epc_features->align;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 	epc = ntb_epc->epc;
 	num_mws = ntb->num_mws;
 	db_count = ntb->db_count;
@@ -1464,7 +1478,7 @@ static int epf_ntb_db_mw_bar_init(struct epf_ntb *ntb,
 		barno = ntb_epc->epf_ntb_bar[bar];
 		epf_bar = &ntb_epc->epf_bar[barno];
 
-		ret = pci_epc_set_bar(epc, func_no, epf_bar);
+		ret = pci_epc_set_bar(epc, func_no, vfunc_no, epf_bar);
 		if (ret) {
 			dev_err(dev, "%s intf: DoorBell BAR set failed\n",
 				pci_epc_interface_string(type));
@@ -1536,9 +1550,9 @@ static int epf_ntb_epc_create_interface(struct epf_ntb *ntb,
 	const struct pci_epc_features *epc_features;
 	struct pci_epf_bar *epf_bar;
 	struct epf_ntb_epc *ntb_epc;
+	u8 func_no, vfunc_no;
 	struct pci_epf *epf;
 	struct device *dev;
-	u8 func_no;
 
 	dev = &ntb->epf->dev;
 
@@ -1547,6 +1561,7 @@ static int epf_ntb_epc_create_interface(struct epf_ntb *ntb,
 		return -ENOMEM;
 
 	epf = ntb->epf;
+	vfunc_no = epf->vfunc_no;
 	if (type == PRIMARY_INTERFACE) {
 		func_no = epf->func_no;
 		epf_bar = epf->bar;
@@ -1558,11 +1573,12 @@ static int epf_ntb_epc_create_interface(struct epf_ntb *ntb,
 	ntb_epc->linkup = false;
 	ntb_epc->epc = epc;
 	ntb_epc->func_no = func_no;
+	ntb_epc->vfunc_no = vfunc_no;
 	ntb_epc->type = type;
 	ntb_epc->epf_bar = epf_bar;
 	ntb_epc->epf_ntb = ntb;
 
-	epc_features = pci_epc_get_features(epc, func_no);
+	epc_features = pci_epc_get_features(epc, func_no, vfunc_no);
 	if (!epc_features)
 		return -EINVAL;
 	ntb_epc->epc_features = epc_features;
@@ -1702,10 +1718,10 @@ static int epf_ntb_epc_init_interface(struct epf_ntb *ntb,
 				      enum pci_epc_interface_type type)
 {
 	struct epf_ntb_epc *ntb_epc;
+	u8 func_no, vfunc_no;
 	struct pci_epc *epc;
 	struct pci_epf *epf;
 	struct device *dev;
-	u8 func_no;
 	int ret;
 
 	ntb_epc = ntb->epc[type];
@@ -1713,6 +1729,7 @@ static int epf_ntb_epc_init_interface(struct epf_ntb *ntb,
 	dev = &epf->dev;
 	epc = ntb_epc->epc;
 	func_no = ntb_epc->func_no;
+	vfunc_no = ntb_epc->vfunc_no;
 
 	ret = epf_ntb_config_sspad_bar_set(ntb->epc[type]);
 	if (ret) {
@@ -1742,11 +1759,13 @@ static int epf_ntb_epc_init_interface(struct epf_ntb *ntb,
 		goto err_db_mw_bar_init;
 	}
 
-	ret = pci_epc_write_header(epc, func_no, epf->header);
-	if (ret) {
-		dev_err(dev, "%s intf: Configuration header write failed\n",
-			pci_epc_interface_string(type));
-		goto err_write_header;
+	if (vfunc_no <= 1) {
+		ret = pci_epc_write_header(epc, func_no, vfunc_no, epf->header);
+		if (ret) {
+			dev_err(dev, "%s intf: Configuration header write failed\n",
+				pci_epc_interface_string(type));
+			goto err_write_header;
+		}
 	}
 
 	INIT_DELAYED_WORK(&ntb->epc[type]->cmd_handler, epf_ntb_cmd_handler);
diff --git a/drivers/pci/endpoint/functions/pci-epf-test.c b/drivers/pci/endpoint/functions/pci-epf-test.c
index d2708ca4bece..90d84d3bc868 100644
--- a/drivers/pci/endpoint/functions/pci-epf-test.c
+++ b/drivers/pci/endpoint/functions/pci-epf-test.c
@@ -247,8 +247,8 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 		goto err;
 	}
 
-	ret = pci_epc_map_addr(epc, epf->func_no, src_phys_addr, reg->src_addr,
-			       reg->size);
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, src_phys_addr,
+			       reg->src_addr, reg->size);
 	if (ret) {
 		dev_err(dev, "Failed to map source address\n");
 		reg->status = STATUS_SRC_ADDR_INVALID;
@@ -263,8 +263,8 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 		goto err_src_map_addr;
 	}
 
-	ret = pci_epc_map_addr(epc, epf->func_no, dst_phys_addr, reg->dst_addr,
-			       reg->size);
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, dst_phys_addr,
+			       reg->dst_addr, reg->size);
 	if (ret) {
 		dev_err(dev, "Failed to map destination address\n");
 		reg->status = STATUS_DST_ADDR_INVALID;
@@ -291,13 +291,13 @@ static int pci_epf_test_copy(struct pci_epf_test *epf_test)
 	pci_epf_test_print_rate("COPY", reg->size, &start, &end, use_dma);
 
 err_map_addr:
-	pci_epc_unmap_addr(epc, epf->func_no, dst_phys_addr);
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, dst_phys_addr);
 
 err_dst_addr:
 	pci_epc_mem_free_addr(epc, dst_phys_addr, dst_addr, reg->size);
 
 err_src_map_addr:
-	pci_epc_unmap_addr(epc, epf->func_no, src_phys_addr);
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, src_phys_addr);
 
 err_src_addr:
 	pci_epc_mem_free_addr(epc, src_phys_addr, src_addr, reg->size);
@@ -331,8 +331,8 @@ static int pci_epf_test_read(struct pci_epf_test *epf_test)
 		goto err;
 	}
 
-	ret = pci_epc_map_addr(epc, epf->func_no, phys_addr, reg->src_addr,
-			       reg->size);
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, phys_addr,
+			       reg->src_addr, reg->size);
 	if (ret) {
 		dev_err(dev, "Failed to map address\n");
 		reg->status = STATUS_SRC_ADDR_INVALID;
@@ -386,7 +386,7 @@ err_dma_map:
 	kfree(buf);
 
 err_map_addr:
-	pci_epc_unmap_addr(epc, epf->func_no, phys_addr);
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, phys_addr);
 
 err_addr:
 	pci_epc_mem_free_addr(epc, phys_addr, src_addr, reg->size);
@@ -419,8 +419,8 @@ static int pci_epf_test_write(struct pci_epf_test *epf_test)
 		goto err;
 	}
 
-	ret = pci_epc_map_addr(epc, epf->func_no, phys_addr, reg->dst_addr,
-			       reg->size);
+	ret = pci_epc_map_addr(epc, epf->func_no, epf->vfunc_no, phys_addr,
+			       reg->dst_addr, reg->size);
 	if (ret) {
 		dev_err(dev, "Failed to map address\n");
 		reg->status = STATUS_DST_ADDR_INVALID;
@@ -479,7 +479,7 @@ err_dma_map:
 	kfree(buf);
 
 err_map_addr:
-	pci_epc_unmap_addr(epc, epf->func_no, phys_addr);
+	pci_epc_unmap_addr(epc, epf->func_no, epf->vfunc_no, phys_addr);
 
 err_addr:
 	pci_epc_mem_free_addr(epc, phys_addr, dst_addr, reg->size);
@@ -501,13 +501,16 @@ static void pci_epf_test_raise_irq(struct pci_epf_test *epf_test, u8 irq_type,
 
 	switch (irq_type) {
 	case IRQ_TYPE_LEGACY:
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_LEGACY, 0);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_LEGACY, 0);
 		break;
 	case IRQ_TYPE_MSI:
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI, irq);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_MSI, irq);
 		break;
 	case IRQ_TYPE_MSIX:
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX, irq);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_MSIX, irq);
 		break;
 	default:
 		dev_err(dev, "Failed to raise IRQ, unknown type\n");
@@ -542,7 +545,8 @@ static void pci_epf_test_cmd_handler(struct work_struct *work)
 
 	if (command & COMMAND_RAISE_LEGACY_IRQ) {
 		reg->status = STATUS_IRQ_RAISED;
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_LEGACY, 0);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_LEGACY, 0);
 		goto reset_handler;
 	}
 
@@ -580,22 +584,22 @@ static void pci_epf_test_cmd_handler(struct work_struct *work)
 	}
 
 	if (command & COMMAND_RAISE_MSI_IRQ) {
-		count = pci_epc_get_msi(epc, epf->func_no);
+		count = pci_epc_get_msi(epc, epf->func_no, epf->vfunc_no);
 		if (reg->irq_number > count || count <= 0)
 			goto reset_handler;
 		reg->status = STATUS_IRQ_RAISED;
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSI,
-				  reg->irq_number);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_MSI, reg->irq_number);
 		goto reset_handler;
 	}
 
 	if (command & COMMAND_RAISE_MSIX_IRQ) {
-		count = pci_epc_get_msix(epc, epf->func_no);
+		count = pci_epc_get_msix(epc, epf->func_no, epf->vfunc_no);
 		if (reg->irq_number > count || count <= 0)
 			goto reset_handler;
 		reg->status = STATUS_IRQ_RAISED;
-		pci_epc_raise_irq(epc, epf->func_no, PCI_EPC_IRQ_MSIX,
-				  reg->irq_number);
+		pci_epc_raise_irq(epc, epf->func_no, epf->vfunc_no,
+				  PCI_EPC_IRQ_MSIX, reg->irq_number);
 		goto reset_handler;
 	}
 
@@ -618,7 +622,8 @@ static void pci_epf_test_unbind(struct pci_epf *epf)
 		epf_bar = &epf->bar[bar];
 
 		if (epf_test->reg[bar]) {
-			pci_epc_clear_bar(epc, epf->func_no, epf_bar);
+			pci_epc_clear_bar(epc, epf->func_no, epf->vfunc_no,
+					  epf_bar);
 			pci_epf_free_space(epf, epf_test->reg[bar], bar,
 					   PRIMARY_INTERFACE);
 		}
@@ -650,7 +655,8 @@ static int pci_epf_test_set_bar(struct pci_epf *epf)
 		if (!!(epc_features->reserved_bar & (1 << bar)))
 			continue;
 
-		ret = pci_epc_set_bar(epc, epf->func_no, epf_bar);
+		ret = pci_epc_set_bar(epc, epf->func_no, epf->vfunc_no,
+				      epf_bar);
 		if (ret) {
 			pci_epf_free_space(epf, epf_test->reg[bar], bar,
 					   PRIMARY_INTERFACE);
@@ -674,16 +680,18 @@ static int pci_epf_test_core_init(struct pci_epf *epf)
 	bool msi_capable = true;
 	int ret;
 
-	epc_features = pci_epc_get_features(epc, epf->func_no);
+	epc_features = pci_epc_get_features(epc, epf->func_no, epf->vfunc_no);
 	if (epc_features) {
 		msix_capable = epc_features->msix_capable;
 		msi_capable = epc_features->msi_capable;
 	}
 
-	ret = pci_epc_write_header(epc, epf->func_no, header);
-	if (ret) {
-		dev_err(dev, "Configuration header write failed\n");
-		return ret;
+	if (epf->vfunc_no <= 1) {
+		ret = pci_epc_write_header(epc, epf->func_no, epf->vfunc_no, header);
+		if (ret) {
+			dev_err(dev, "Configuration header write failed\n");
+			return ret;
+		}
 	}
 
 	ret = pci_epf_test_set_bar(epf);
@@ -691,7 +699,8 @@ static int pci_epf_test_core_init(struct pci_epf *epf)
 		return ret;
 
 	if (msi_capable) {
-		ret = pci_epc_set_msi(epc, epf->func_no, epf->msi_interrupts);
+		ret = pci_epc_set_msi(epc, epf->func_no, epf->vfunc_no,
+				      epf->msi_interrupts);
 		if (ret) {
 			dev_err(dev, "MSI configuration failed\n");
 			return ret;
@@ -699,7 +708,8 @@ static int pci_epf_test_core_init(struct pci_epf *epf)
 	}
 
 	if (msix_capable) {
-		ret = pci_epc_set_msix(epc, epf->func_no, epf->msix_interrupts,
+		ret = pci_epc_set_msix(epc, epf->func_no, epf->vfunc_no,
+				       epf->msix_interrupts,
 				       epf_test->test_reg_bar,
 				       epf_test->msix_table_offset);
 		if (ret) {
@@ -832,7 +842,7 @@ static int pci_epf_test_bind(struct pci_epf *epf)
 	if (WARN_ON_ONCE(!epc))
 		return -EINVAL;
 
-	epc_features = pci_epc_get_features(epc, epf->func_no);
+	epc_features = pci_epc_get_features(epc, epf->func_no, epf->vfunc_no);
 	if (!epc_features) {
 		dev_err(&epf->dev, "epc_features not implemented\n");
 		return -EOPNOTSUPP;
diff --git a/drivers/pci/endpoint/pci-ep-cfs.c b/drivers/pci/endpoint/pci-ep-cfs.c
index f3a8b833b479..999911801877 100644
--- a/drivers/pci/endpoint/pci-ep-cfs.c
+++ b/drivers/pci/endpoint/pci-ep-cfs.c
@@ -475,6 +475,28 @@ static struct configfs_attribute *pci_epf_attrs[] = {
 	NULL,
 };
 
+static int pci_epf_vepf_link(struct config_item *epf_pf_item,
+			     struct config_item *epf_vf_item)
+{
+	struct pci_epf_group *epf_vf_group = to_pci_epf_group(epf_vf_item);
+	struct pci_epf_group *epf_pf_group = to_pci_epf_group(epf_pf_item);
+	struct pci_epf *epf_pf = epf_pf_group->epf;
+	struct pci_epf *epf_vf = epf_vf_group->epf;
+
+	return pci_epf_add_vepf(epf_pf, epf_vf);
+}
+
+static void pci_epf_vepf_unlink(struct config_item *epf_pf_item,
+				struct config_item *epf_vf_item)
+{
+	struct pci_epf_group *epf_vf_group = to_pci_epf_group(epf_vf_item);
+	struct pci_epf_group *epf_pf_group = to_pci_epf_group(epf_pf_item);
+	struct pci_epf *epf_pf = epf_pf_group->epf;
+	struct pci_epf *epf_vf = epf_vf_group->epf;
+
+	pci_epf_remove_vepf(epf_pf, epf_vf);
+}
+
 static void pci_epf_release(struct config_item *item)
 {
 	struct pci_epf_group *epf_group = to_pci_epf_group(item);
@@ -487,6 +509,8 @@ static void pci_epf_release(struct config_item *item)
 }
 
 static struct configfs_item_operations pci_epf_ops = {
+	.allow_link		= pci_epf_vepf_link,
+	.drop_link		= pci_epf_vepf_unlink,
 	.release		= pci_epf_release,
 };
 
diff --git a/drivers/pci/endpoint/pci-epc-core.c b/drivers/pci/endpoint/pci-epc-core.c
index adec9bee72cf..ecbb0fb3b653 100644
--- a/drivers/pci/endpoint/pci-epc-core.c
+++ b/drivers/pci/endpoint/pci-epc-core.c
@@ -137,24 +137,29 @@ EXPORT_SYMBOL_GPL(pci_epc_get_next_free_bar);
  * @epc: the features supported by *this* EPC device will be returned
  * @func_no: the features supported by the EPC device specific to the
  *	     endpoint function with func_no will be returned
+ * @vfunc_no: the features supported by the EPC device specific to the
+ *	     virtual endpoint function with vfunc_no will be returned
  *
  * Invoke to get the features provided by the EPC which may be
  * specific to an endpoint function. Returns pci_epc_features on success
  * and NULL for any failures.
  */
 const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
-						    u8 func_no)
+						    u8 func_no, u8 vfunc_no)
 {
 	const struct pci_epc_features *epc_features;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return NULL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return NULL;
+
 	if (!epc->ops->get_features)
 		return NULL;
 
 	mutex_lock(&epc->lock);
-	epc_features = epc->ops->get_features(epc, func_no);
+	epc_features = epc->ops->get_features(epc, func_no, vfunc_no);
 	mutex_unlock(&epc->lock);
 
 	return epc_features;
@@ -205,13 +210,14 @@ EXPORT_SYMBOL_GPL(pci_epc_start);
 /**
  * pci_epc_raise_irq() - interrupt the host system
  * @epc: the EPC device which has to interrupt the host
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @type: specify the type of interrupt; legacy, MSI or MSI-X
  * @interrupt_num: the MSI or MSI-X interrupt number
  *
  * Invoke to raise an legacy, MSI or MSI-X interrupt
  */
-int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
+int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		      enum pci_epc_irq_type type, u16 interrupt_num)
 {
 	int ret;
@@ -219,11 +225,14 @@ int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->raise_irq)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->raise_irq(epc, func_no, type, interrupt_num);
+	ret = epc->ops->raise_irq(epc, func_no, vfunc_no, type, interrupt_num);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -235,6 +244,7 @@ EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
  *                         MSI data
  * @epc: the EPC device which has the MSI capability
  * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @phys_addr: the physical address of the outbound region
  * @interrupt_num: the MSI interrupt number
  * @entry_size: Size of Outbound address region for each interrupt
@@ -250,21 +260,25 @@ EXPORT_SYMBOL_GPL(pci_epc_raise_irq);
  * physical address (in outbound region) of the other interface to ring
  * doorbell.
  */
-int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, phys_addr_t phys_addr,
-			u8 interrupt_num, u32 entry_size, u32 *msi_data,
-			u32 *msi_addr_offset)
+int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			phys_addr_t phys_addr, u8 interrupt_num, u32 entry_size,
+			u32 *msi_data, u32 *msi_addr_offset)
 {
 	int ret;
 
 	if (IS_ERR_OR_NULL(epc))
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->map_msi_irq)
 		return -EINVAL;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->map_msi_irq(epc, func_no, phys_addr, interrupt_num,
-				    entry_size, msi_data, msi_addr_offset);
+	ret = epc->ops->map_msi_irq(epc, func_no, vfunc_no, phys_addr,
+				    interrupt_num, entry_size, msi_data,
+				    msi_addr_offset);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -274,22 +288,26 @@ EXPORT_SYMBOL_GPL(pci_epc_map_msi_irq);
 /**
  * pci_epc_get_msi() - get the number of MSI interrupt numbers allocated
  * @epc: the EPC device to which MSI interrupts was requested
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  *
  * Invoke to get the number of MSI interrupts allocated by the RC
  */
-int pci_epc_get_msi(struct pci_epc *epc, u8 func_no)
+int pci_epc_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	int interrupt;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return 0;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return 0;
+
 	if (!epc->ops->get_msi)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	interrupt = epc->ops->get_msi(epc, func_no);
+	interrupt = epc->ops->get_msi(epc, func_no, vfunc_no);
 	mutex_unlock(&epc->lock);
 
 	if (interrupt < 0)
@@ -304,12 +322,13 @@ EXPORT_SYMBOL_GPL(pci_epc_get_msi);
 /**
  * pci_epc_set_msi() - set the number of MSI interrupt numbers required
  * @epc: the EPC device on which MSI has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @interrupts: number of MSI interrupts required by the EPF
  *
  * Invoke to set the required number of MSI interrupts.
  */
-int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
+int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no, u8 interrupts)
 {
 	int ret;
 	u8 encode_int;
@@ -318,13 +337,16 @@ int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts)
 	    interrupts > 32)
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->set_msi)
 		return 0;
 
 	encode_int = order_base_2(interrupts);
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->set_msi(epc, func_no, encode_int);
+	ret = epc->ops->set_msi(epc, func_no, vfunc_no, encode_int);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -334,22 +356,26 @@ EXPORT_SYMBOL_GPL(pci_epc_set_msi);
 /**
  * pci_epc_get_msix() - get the number of MSI-X interrupt numbers allocated
  * @epc: the EPC device to which MSI-X interrupts was requested
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  *
  * Invoke to get the number of MSI-X interrupts allocated by the RC
  */
-int pci_epc_get_msix(struct pci_epc *epc, u8 func_no)
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no)
 {
 	int interrupt;
 
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return 0;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return 0;
+
 	if (!epc->ops->get_msix)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	interrupt = epc->ops->get_msix(epc, func_no);
+	interrupt = epc->ops->get_msix(epc, func_no, vfunc_no);
 	mutex_unlock(&epc->lock);
 
 	if (interrupt < 0)
@@ -362,15 +388,16 @@ EXPORT_SYMBOL_GPL(pci_epc_get_msix);
 /**
  * pci_epc_set_msix() - set the number of MSI-X interrupt numbers required
  * @epc: the EPC device on which MSI-X has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @interrupts: number of MSI-X interrupts required by the EPF
  * @bir: BAR where the MSI-X table resides
  * @offset: Offset pointing to the start of MSI-X table
  *
  * Invoke to set the required number of MSI-X interrupts.
  */
-int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
-		     enum pci_barno bir, u32 offset)
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		     u16 interrupts, enum pci_barno bir, u32 offset)
 {
 	int ret;
 
@@ -378,11 +405,15 @@ int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
 	    interrupts < 1 || interrupts > 2048)
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->set_msix)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->set_msix(epc, func_no, interrupts - 1, bir, offset);
+	ret = epc->ops->set_msix(epc, func_no, vfunc_no, interrupts - 1, bir,
+				 offset);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -392,22 +423,26 @@ EXPORT_SYMBOL_GPL(pci_epc_set_msix);
 /**
  * pci_epc_unmap_addr() - unmap CPU address from PCI address
  * @epc: the EPC device on which address is allocated
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @phys_addr: physical address of the local system
  *
  * Invoke to unmap the CPU address from PCI address.
  */
-void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
+void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			phys_addr_t phys_addr)
 {
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return;
+
 	if (!epc->ops->unmap_addr)
 		return;
 
 	mutex_lock(&epc->lock);
-	epc->ops->unmap_addr(epc, func_no, phys_addr);
+	epc->ops->unmap_addr(epc, func_no, vfunc_no, phys_addr);
 	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
@@ -415,14 +450,15 @@ EXPORT_SYMBOL_GPL(pci_epc_unmap_addr);
 /**
  * pci_epc_map_addr() - map CPU address to PCI address
  * @epc: the EPC device on which address is allocated
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @phys_addr: physical address of the local system
  * @pci_addr: PCI address to which the physical address should be mapped
  * @size: the size of the allocation
  *
  * Invoke to map CPU address with PCI address.
  */
-int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
+int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		     phys_addr_t phys_addr, u64 pci_addr, size_t size)
 {
 	int ret;
@@ -430,11 +466,15 @@ int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->map_addr)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->map_addr(epc, func_no, phys_addr, pci_addr, size);
+	ret = epc->ops->map_addr(epc, func_no, vfunc_no, phys_addr, pci_addr,
+				 size);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -444,12 +484,13 @@ EXPORT_SYMBOL_GPL(pci_epc_map_addr);
 /**
  * pci_epc_clear_bar() - reset the BAR
  * @epc: the EPC device for which the BAR has to be cleared
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @epf_bar: the struct epf_bar that contains the BAR information
  *
  * Invoke to reset the BAR of the endpoint device.
  */
-void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
+void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		       struct pci_epf_bar *epf_bar)
 {
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions ||
@@ -457,11 +498,14 @@ void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
 	     epf_bar->flags & PCI_BASE_ADDRESS_MEM_TYPE_64))
 		return;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return;
+
 	if (!epc->ops->clear_bar)
 		return;
 
 	mutex_lock(&epc->lock);
-	epc->ops->clear_bar(epc, func_no, epf_bar);
+	epc->ops->clear_bar(epc, func_no, vfunc_no, epf_bar);
 	mutex_unlock(&epc->lock);
 }
 EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
@@ -469,12 +513,13 @@ EXPORT_SYMBOL_GPL(pci_epc_clear_bar);
 /**
  * pci_epc_set_bar() - configure BAR in order for host to assign PCI addr space
  * @epc: the EPC device on which BAR has to be configured
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @epf_bar: the struct epf_bar that contains the BAR information
  *
  * Invoke to configure the BAR of the endpoint device.
  */
-int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
+int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		    struct pci_epf_bar *epf_bar)
 {
 	int ret;
@@ -489,11 +534,14 @@ int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
 	     !(flags & PCI_BASE_ADDRESS_MEM_TYPE_64)))
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
 	if (!epc->ops->set_bar)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->set_bar(epc, func_no, epf_bar);
+	ret = epc->ops->set_bar(epc, func_no, vfunc_no, epf_bar);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -503,7 +551,8 @@ EXPORT_SYMBOL_GPL(pci_epc_set_bar);
 /**
  * pci_epc_write_header() - write standard configuration header
  * @epc: the EPC device to which the configuration header should be written
- * @func_no: the endpoint function number in the EPC device
+ * @func_no: the physical endpoint function number in the EPC device
+ * @vfunc_no: the virtual endpoint function number in the physical function
  * @header: standard configuration header fields
  *
  * Invoke to write the configuration header to the endpoint controller. Every
@@ -511,7 +560,7 @@ EXPORT_SYMBOL_GPL(pci_epc_set_bar);
  * configuration header would be written. The callback function should write
  * the header fields to this dedicated location.
  */
-int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
+int pci_epc_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			 struct pci_epf_header *header)
 {
 	int ret;
@@ -519,11 +568,18 @@ int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
 	if (IS_ERR_OR_NULL(epc) || func_no >= epc->max_functions)
 		return -EINVAL;
 
+	if (vfunc_no > 0 && (!epc->max_vfs || vfunc_no > epc->max_vfs[func_no]))
+		return -EINVAL;
+
+	/* Only Virtual Function #1 has deviceID */
+	if (vfunc_no > 1)
+		return -EINVAL;
+
 	if (!epc->ops->write_header)
 		return 0;
 
 	mutex_lock(&epc->lock);
-	ret = epc->ops->write_header(epc, func_no, header);
+	ret = epc->ops->write_header(epc, func_no, vfunc_no, header);
 	mutex_unlock(&epc->lock);
 
 	return ret;
@@ -548,7 +604,7 @@ int pci_epc_add_epf(struct pci_epc *epc, struct pci_epf *epf,
 	u32 func_no;
 	int ret = 0;
 
-	if (IS_ERR_OR_NULL(epc))
+	if (IS_ERR_OR_NULL(epc) || epf->is_vf)
 		return -EINVAL;
 
 	if (type == PRIMARY_INTERFACE && epf->epc)
diff --git a/drivers/pci/endpoint/pci-epf-core.c b/drivers/pci/endpoint/pci-epf-core.c
index 502eb79cd551..8aea16380870 100644
--- a/drivers/pci/endpoint/pci-epf-core.c
+++ b/drivers/pci/endpoint/pci-epf-core.c
@@ -62,13 +62,20 @@ EXPORT_SYMBOL_GPL(pci_epf_type_add_cfs);
  */
 void pci_epf_unbind(struct pci_epf *epf)
 {
+	struct pci_epf *epf_vf;
+
 	if (!epf->driver) {
 		dev_WARN(&epf->dev, "epf device not bound to driver\n");
 		return;
 	}
 
 	mutex_lock(&epf->lock);
-	epf->driver->ops->unbind(epf);
+	list_for_each_entry(epf_vf, &epf->pci_vepf, list) {
+		if (epf_vf->is_bound)
+			epf_vf->driver->ops->unbind(epf_vf);
+	}
+	if (epf->is_bound)
+		epf->driver->ops->unbind(epf);
 	mutex_unlock(&epf->lock);
 	module_put(epf->driver->owner);
 }
@@ -83,10 +90,14 @@ EXPORT_SYMBOL_GPL(pci_epf_unbind);
  */
 int pci_epf_bind(struct pci_epf *epf)
 {
+	struct device *dev = &epf->dev;
+	struct pci_epf *epf_vf;
+	u8 func_no, vfunc_no;
+	struct pci_epc *epc;
 	int ret;
 
 	if (!epf->driver) {
-		dev_WARN(&epf->dev, "epf device not bound to driver\n");
+		dev_WARN(dev, "epf device not bound to driver\n");
 		return -EINVAL;
 	}
 
@@ -94,14 +105,141 @@ int pci_epf_bind(struct pci_epf *epf)
 		return -EAGAIN;
 
 	mutex_lock(&epf->lock);
+	list_for_each_entry(epf_vf, &epf->pci_vepf, list) {
+		vfunc_no = epf_vf->vfunc_no;
+
+		if (vfunc_no < 1) {
+			dev_err(dev, "Invalid virtual function number\n");
+			ret = -EINVAL;
+			goto ret;
+		}
+
+		epc = epf->epc;
+		func_no = epf->func_no;
+		if (!IS_ERR_OR_NULL(epc)) {
+			if (!epc->max_vfs) {
+				dev_err(dev, "No support for virt function\n");
+				ret = -EINVAL;
+				goto ret;
+			}
+
+			if (vfunc_no > epc->max_vfs[func_no]) {
+				dev_err(dev, "PF%d: Exceeds max vfunc number\n",
+					func_no);
+				ret = -EINVAL;
+				goto ret;
+			}
+		}
+
+		epc = epf->sec_epc;
+		func_no = epf->sec_epc_func_no;
+		if (!IS_ERR_OR_NULL(epc)) {
+			if (!epc->max_vfs) {
+				dev_err(dev, "No support for virt function\n");
+				ret = -EINVAL;
+				goto ret;
+			}
+
+			if (vfunc_no > epc->max_vfs[func_no]) {
+				dev_err(dev, "PF%d: Exceeds max vfunc number\n",
+					func_no);
+				ret = -EINVAL;
+				goto ret;
+			}
+		}
+
+		epf_vf->func_no = epf->func_no;
+		epf_vf->sec_epc_func_no = epf->sec_epc_func_no;
+		epf_vf->epc = epf->epc;
+		epf_vf->sec_epc = epf->sec_epc;
+		ret = epf_vf->driver->ops->bind(epf_vf);
+		if (ret)
+			goto ret;
+		epf_vf->is_bound = true;
+	}
+
 	ret = epf->driver->ops->bind(epf);
+	if (ret)
+		goto ret;
+	epf->is_bound = true;
+
+	mutex_unlock(&epf->lock);
+	return 0;
+
+ret:
 	mutex_unlock(&epf->lock);
+	pci_epf_unbind(epf);
 
 	return ret;
 }
 EXPORT_SYMBOL_GPL(pci_epf_bind);
 
 /**
+ * pci_epf_add_vepf() - associate virtual EP function to physical EP function
+ * @epf_pf: the physical EP function to which the virtual EP function should be
+ *   associated
+ * @epf_vf: the virtual EP function to be added
+ *
+ * A physical endpoint function can be associated with multiple virtual
+ * endpoint functions. Invoke pci_epf_add_epf() to add a virtual PCI endpoint
+ * function to a physical PCI endpoint function.
+ */
+int pci_epf_add_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
+{
+	u32 vfunc_no;
+
+	if (IS_ERR_OR_NULL(epf_pf) || IS_ERR_OR_NULL(epf_vf))
+		return -EINVAL;
+
+	if (epf_pf->epc || epf_vf->epc || epf_vf->epf_pf)
+		return -EBUSY;
+
+	if (epf_pf->sec_epc || epf_vf->sec_epc)
+		return -EBUSY;
+
+	mutex_lock(&epf_pf->lock);
+	vfunc_no = find_first_zero_bit(&epf_pf->vfunction_num_map,
+				       BITS_PER_LONG);
+	if (vfunc_no >= BITS_PER_LONG) {
+		mutex_unlock(&epf_pf->lock);
+		return -EINVAL;
+	}
+
+	set_bit(vfunc_no, &epf_pf->vfunction_num_map);
+	epf_vf->vfunc_no = vfunc_no;
+
+	epf_vf->epf_pf = epf_pf;
+	epf_vf->is_vf = true;
+
+	list_add_tail(&epf_vf->list, &epf_pf->pci_vepf);
+	mutex_unlock(&epf_pf->lock);
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(pci_epf_add_vepf);
+
+/**
+ * pci_epf_remove_vepf() - remove virtual EP function from physical EP function
+ * @epf_pf: the physical EP function from which the virtual EP function should
+ *   be removed
+ * @epf_vf: the virtual EP function to be removed
+ *
+ * Invoke to remove a virtual endpoint function from the physcial endpoint
+ * function.
+ */
+void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf)
+{
+	if (IS_ERR_OR_NULL(epf_pf) || IS_ERR_OR_NULL(epf_vf))
+		return;
+
+	mutex_lock(&epf_pf->lock);
+	clear_bit(epf_vf->vfunc_no, &epf_pf->vfunction_num_map);
+	list_del(&epf_vf->list);
+	mutex_unlock(&epf_pf->lock);
+}
+EXPORT_SYMBOL_GPL(pci_epf_remove_vepf);
+
+/**
  * pci_epf_free_space() - free the allocated PCI EPF register space
  * @epf: the EPF device from whom to free the memory
  * @addr: the virtual address of the PCI EPF register space
@@ -317,6 +455,10 @@ struct pci_epf *pci_epf_create(const char *name)
 		return ERR_PTR(-ENOMEM);
 	}
 
+	/* VFs are numbered starting with 1. So set BIT(0) by default */
+	epf->vfunction_num_map = 1;
+	INIT_LIST_HEAD(&epf->pci_vepf);
+
 	dev = &epf->dev;
 	device_initialize(dev);
 	dev->bus = &pci_epf_bus_type;
diff --git a/drivers/pci/host-bridge.c b/drivers/pci/host-bridge.c
index e01d53f5b32f..afa50b446567 100644
--- a/drivers/pci/host-bridge.c
+++ b/drivers/pci/host-bridge.c
@@ -23,6 +23,7 @@ struct pci_host_bridge *pci_find_host_bridge(struct pci_bus *bus)
 
 	return to_pci_host_bridge(root_bus->bridge);
 }
+EXPORT_SYMBOL_GPL(pci_find_host_bridge);
 
 struct device *pci_get_host_bridge_device(struct pci_dev *dev)
 {
diff --git a/drivers/pci/hotplug/TODO b/drivers/pci/hotplug/TODO
index a32070be5adf..cc6194aa24c1 100644
--- a/drivers/pci/hotplug/TODO
+++ b/drivers/pci/hotplug/TODO
@@ -40,9 +40,6 @@ ibmphp:
 
 * The return value of pci_hp_register() is not checked.
 
-* iounmap(io_mem) is called in the error path of ebda_rsrc_controller()
-  and once more in the error path of its caller ibmphp_access_ebda().
-
 * The various slot data structures are difficult to follow and need to be
   simplified.  A lot of functions are too large and too complex, they need
   to be broken up into smaller, manageable pieces.  Negative examples are
diff --git a/drivers/pci/hotplug/ibmphp_ebda.c b/drivers/pci/hotplug/ibmphp_ebda.c
index 11a2661dc062..7fb75401ad8a 100644
--- a/drivers/pci/hotplug/ibmphp_ebda.c
+++ b/drivers/pci/hotplug/ibmphp_ebda.c
@@ -714,8 +714,7 @@ static int __init ebda_rsrc_controller(void)
 		/* init hpc structure */
 		hpc_ptr = alloc_ebda_hpc(slot_num, bus_num);
 		if (!hpc_ptr) {
-			rc = -ENOMEM;
-			goto error_no_hpc;
+			return -ENOMEM;
 		}
 		hpc_ptr->ctlr_id = ctlr_id;
 		hpc_ptr->ctlr_relative_id = ctlr;
@@ -910,8 +909,6 @@ error:
 	kfree(tmp_slot);
 error_no_slot:
 	free_ebda_hpc(hpc_ptr);
-error_no_hpc:
-	iounmap(io_mem);
 	return rc;
 }
 
diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h
index d4a930881054..69fd401691be 100644
--- a/drivers/pci/hotplug/pciehp.h
+++ b/drivers/pci/hotplug/pciehp.h
@@ -184,7 +184,7 @@ void pciehp_release_ctrl(struct controller *ctrl);
 
 int pciehp_sysfs_enable_slot(struct hotplug_slot *hotplug_slot);
 int pciehp_sysfs_disable_slot(struct hotplug_slot *hotplug_slot);
-int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, int probe);
+int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, bool probe);
 int pciehp_get_attention_status(struct hotplug_slot *hotplug_slot, u8 *status);
 int pciehp_set_raw_indicator_status(struct hotplug_slot *h_slot, u8 status);
 int pciehp_get_raw_indicator_status(struct hotplug_slot *h_slot, u8 *status);
diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c
index 9d06939736c0..3024d7e85e6a 100644
--- a/drivers/pci/hotplug/pciehp_hpc.c
+++ b/drivers/pci/hotplug/pciehp_hpc.c
@@ -870,7 +870,7 @@ void pcie_disable_interrupt(struct controller *ctrl)
  * momentarily, if we see that they could interfere. Also, clear any spurious
  * events after.
  */
-int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, int probe)
+int pciehp_reset_slot(struct hotplug_slot *hotplug_slot, bool probe)
 {
 	struct controller *ctrl = to_ctrl(hotplug_slot);
 	struct pci_dev *pdev = ctrl_dev(ctrl);
diff --git a/drivers/pci/hotplug/pnv_php.c b/drivers/pci/hotplug/pnv_php.c
index 04565162a449..f4c2e6e01be0 100644
--- a/drivers/pci/hotplug/pnv_php.c
+++ b/drivers/pci/hotplug/pnv_php.c
@@ -526,7 +526,7 @@ scan:
 	return 0;
 }
 
-static int pnv_php_reset_slot(struct hotplug_slot *slot, int probe)
+static int pnv_php_reset_slot(struct hotplug_slot *slot, bool probe)
 {
 	struct pnv_php_slot *php_slot = to_pnv_php_slot(slot);
 	struct pci_dev *bridge = php_slot->pdev;
diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index a143b02b2dcd..d84381ce82b5 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -310,7 +310,7 @@ static int devm_of_pci_get_host_bridge_resources(struct device *dev,
 	/* Check for ranges property */
 	err = of_pci_range_parser_init(&parser, dev_node);
 	if (err)
-		goto failed;
+		return 0;
 
 	dev_dbg(dev, "Parsing ranges property...\n");
 	for_each_of_pci_range(&parser, &range) {
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index 36bc23e21759..a1b1e2a01632 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -17,6 +17,7 @@
 #include <linux/pci-acpi.h>
 #include <linux/pm_runtime.h>
 #include <linux/pm_qos.h>
+#include <linux/rwsem.h>
 #include "pci.h"
 
 /*
@@ -934,58 +935,77 @@ static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
 
 static struct acpi_device *acpi_pci_find_companion(struct device *dev);
 
+void pci_set_acpi_fwnode(struct pci_dev *dev)
+{
+	if (!ACPI_COMPANION(&dev->dev) && !pci_dev_is_added(dev))
+		ACPI_COMPANION_SET(&dev->dev,
+				   acpi_pci_find_companion(&dev->dev));
+}
+
+/**
+ * pci_dev_acpi_reset - do a function level reset using _RST method
+ * @dev: device to reset
+ * @probe: if true, return 0 if device supports _RST
+ */
+int pci_dev_acpi_reset(struct pci_dev *dev, bool probe)
+{
+	acpi_handle handle = ACPI_HANDLE(&dev->dev);
+
+	if (!handle || !acpi_has_method(handle, "_RST"))
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	if (ACPI_FAILURE(acpi_evaluate_object(handle, "_RST", NULL, NULL))) {
+		pci_warn(dev, "ACPI _RST failed\n");
+		return -ENOTTY;
+	}
+
+	return 0;
+}
+
+static bool acpi_pci_power_manageable(struct pci_dev *dev)
+{
+	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
+
+	if (!adev)
+		return false;
+	return acpi_device_power_manageable(adev);
+}
+
 static bool acpi_pci_bridge_d3(struct pci_dev *dev)
 {
-	const struct fwnode_handle *fwnode;
+	const union acpi_object *obj;
 	struct acpi_device *adev;
-	struct pci_dev *root;
-	u8 val;
+	struct pci_dev *rpdev;
 
 	if (!dev->is_hotplug_bridge)
 		return false;
 
 	/* Assume D3 support if the bridge is power-manageable by ACPI. */
-	adev = ACPI_COMPANION(&dev->dev);
-	if (!adev && !pci_dev_is_added(dev)) {
-		adev = acpi_pci_find_companion(&dev->dev);
-		ACPI_COMPANION_SET(&dev->dev, adev);
-	}
-
-	if (adev && acpi_device_power_manageable(adev))
+	if (acpi_pci_power_manageable(dev))
 		return true;
 
 	/*
-	 * Look for a special _DSD property for the root port and if it
-	 * is set we know the hierarchy behind it supports D3 just fine.
+	 * The ACPI firmware will provide the device-specific properties through
+	 * _DSD configuration object. Look for the 'HotPlugSupportInD3' property
+	 * for the root port and if it is set we know the hierarchy behind it
+	 * supports D3 just fine.
 	 */
-	root = pcie_find_root_port(dev);
-	if (!root)
+	rpdev = pcie_find_root_port(dev);
+	if (!rpdev)
 		return false;
 
-	adev = ACPI_COMPANION(&root->dev);
-	if (root == dev) {
-		/*
-		 * It is possible that the ACPI companion is not yet bound
-		 * for the root port so look it up manually here.
-		 */
-		if (!adev && !pci_dev_is_added(root))
-			adev = acpi_pci_find_companion(&root->dev);
-	}
-
+	adev = ACPI_COMPANION(&rpdev->dev);
 	if (!adev)
 		return false;
 
-	fwnode = acpi_fwnode_handle(adev);
-	if (fwnode_property_read_u8(fwnode, "HotPlugSupportInD3", &val))
+	if (acpi_dev_get_property(adev, "HotPlugSupportInD3",
+				   ACPI_TYPE_INTEGER, &obj) < 0)
 		return false;
 
-	return val == 1;
-}
-
-static bool acpi_pci_power_manageable(struct pci_dev *dev)
-{
-	struct acpi_device *adev = ACPI_COMPANION(&dev->dev);
-	return adev ? acpi_device_power_manageable(adev) : false;
+	return obj->integer.value == 1;
 }
 
 static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
@@ -1159,6 +1179,69 @@ void acpi_pci_remove_bus(struct pci_bus *bus)
 }
 
 /* ACPI bus type */
+
+
+static DECLARE_RWSEM(pci_acpi_companion_lookup_sem);
+static struct acpi_device *(*pci_acpi_find_companion_hook)(struct pci_dev *);
+
+/**
+ * pci_acpi_set_companion_lookup_hook - Set ACPI companion lookup callback.
+ * @func: ACPI companion lookup callback pointer or NULL.
+ *
+ * Set a special ACPI companion lookup callback for PCI devices whose companion
+ * objects in the ACPI namespace have _ADR with non-standard bus-device-function
+ * encodings.
+ *
+ * Return 0 on success or a negative error code on failure (in which case no
+ * changes are made).
+ *
+ * The caller is responsible for the appropriate ordering of the invocations of
+ * this function with respect to the enumeration of the PCI devices needing the
+ * callback installed by it.
+ */
+int pci_acpi_set_companion_lookup_hook(struct acpi_device *(*func)(struct pci_dev *))
+{
+	int ret;
+
+	if (!func)
+		return -EINVAL;
+
+	down_write(&pci_acpi_companion_lookup_sem);
+
+	if (pci_acpi_find_companion_hook) {
+		ret = -EBUSY;
+	} else {
+		pci_acpi_find_companion_hook = func;
+		ret = 0;
+	}
+
+	up_write(&pci_acpi_companion_lookup_sem);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(pci_acpi_set_companion_lookup_hook);
+
+/**
+ * pci_acpi_clear_companion_lookup_hook - Clear ACPI companion lookup callback.
+ *
+ * Clear the special ACPI companion lookup callback previously set by
+ * pci_acpi_set_companion_lookup_hook().  Block until the last running instance
+ * of the callback returns before clearing it.
+ *
+ * The caller is responsible for the appropriate ordering of the invocations of
+ * this function with respect to the enumeration of the PCI devices needing the
+ * callback cleared by it.
+ */
+void pci_acpi_clear_companion_lookup_hook(void)
+{
+	down_write(&pci_acpi_companion_lookup_sem);
+
+	pci_acpi_find_companion_hook = NULL;
+
+	up_write(&pci_acpi_companion_lookup_sem);
+}
+EXPORT_SYMBOL_GPL(pci_acpi_clear_companion_lookup_hook);
+
 static struct acpi_device *acpi_pci_find_companion(struct device *dev)
 {
 	struct pci_dev *pci_dev = to_pci_dev(dev);
@@ -1166,6 +1249,16 @@ static struct acpi_device *acpi_pci_find_companion(struct device *dev)
 	bool check_children;
 	u64 addr;
 
+	down_read(&pci_acpi_companion_lookup_sem);
+
+	adev = pci_acpi_find_companion_hook ?
+		pci_acpi_find_companion_hook(pci_dev) : NULL;
+
+	up_read(&pci_acpi_companion_lookup_sem);
+
+	if (adev)
+		return adev;
+
 	check_children = pci_is_bridge(pci_dev);
 	/* Please ref to ACPI spec for the syntax of _ADR */
 	addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
diff --git a/drivers/pci/pci-bridge-emul.h b/drivers/pci/pci-bridge-emul.h
index b31883022a8e..49bbd37ee318 100644
--- a/drivers/pci/pci-bridge-emul.h
+++ b/drivers/pci/pci-bridge-emul.h
@@ -54,7 +54,7 @@ struct pci_bridge_emul_pcie_conf {
 	__le16 slotctl;
 	__le16 slotsta;
 	__le16 rootctl;
-	__le16 rsvd;
+	__le16 rootcap;
 	__le32 rootsta;
 	__le32 devcap2;
 	__le16 devctl2;
diff --git a/drivers/pci/pci-sysfs.c b/drivers/pci/pci-sysfs.c
index b70f61fbcd4b..7fb5cd17cc98 100644
--- a/drivers/pci/pci-sysfs.c
+++ b/drivers/pci/pci-sysfs.c
@@ -1367,7 +1367,7 @@ static umode_t pci_dev_reset_attr_is_visible(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
 
-	if (!pdev->reset_fn)
+	if (!pci_reset_supported(pdev))
 		return 0;
 
 	return a->mode;
@@ -1491,6 +1491,7 @@ const struct attribute_group *pci_dev_groups[] = {
 	&pci_dev_config_attr_group,
 	&pci_dev_rom_attr_group,
 	&pci_dev_reset_attr_group,
+	&pci_dev_reset_method_attr_group,
 	&pci_dev_vpd_attr_group,
 #ifdef CONFIG_DMI
 	&pci_dev_smbios_attr_group,
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index a5e6759c407b..ce2ab62b64cf 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -31,6 +31,7 @@
 #include <linux/vmalloc.h>
 #include <asm/dma.h>
 #include <linux/aer.h>
+#include <linux/bitfield.h>
 #include "pci.h"
 
 DEFINE_MUTEX(pci_slot_mutex);
@@ -72,6 +73,11 @@ static void pci_dev_d3_sleep(struct pci_dev *dev)
 		msleep(delay);
 }
 
+bool pci_reset_supported(struct pci_dev *dev)
+{
+	return dev->reset_methods[0] != 0;
+}
+
 #ifdef CONFIG_PCI_DOMAINS
 int pci_domains_supported = 1;
 #endif
@@ -206,32 +212,36 @@ int pci_status_get_and_clear_errors(struct pci_dev *pdev)
 EXPORT_SYMBOL_GPL(pci_status_get_and_clear_errors);
 
 #ifdef CONFIG_HAS_IOMEM
-void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
+static void __iomem *__pci_ioremap_resource(struct pci_dev *pdev, int bar,
+					    bool write_combine)
 {
 	struct resource *res = &pdev->resource[bar];
+	resource_size_t start = res->start;
+	resource_size_t size = resource_size(res);
 
 	/*
 	 * Make sure the BAR is actually a memory resource, not an IO resource
 	 */
 	if (res->flags & IORESOURCE_UNSET || !(res->flags & IORESOURCE_MEM)) {
-		pci_warn(pdev, "can't ioremap BAR %d: %pR\n", bar, res);
+		pci_err(pdev, "can't ioremap BAR %d: %pR\n", bar, res);
 		return NULL;
 	}
-	return ioremap(res->start, resource_size(res));
+
+	if (write_combine)
+		return ioremap_wc(start, size);
+
+	return ioremap(start, size);
+}
+
+void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
+{
+	return __pci_ioremap_resource(pdev, bar, false);
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_bar);
 
 void __iomem *pci_ioremap_wc_bar(struct pci_dev *pdev, int bar)
 {
-	/*
-	 * Make sure the BAR is actually a memory resource, not an IO resource
-	 */
-	if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
-		WARN_ON(1);
-		return NULL;
-	}
-	return ioremap_wc(pci_resource_start(pdev, bar),
-			  pci_resource_len(pdev, bar));
+	return __pci_ioremap_resource(pdev, bar, true);
 }
 EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar);
 #endif
@@ -265,7 +275,7 @@ static int pci_dev_str_match_path(struct pci_dev *dev, const char *path,
 
 	*endptr = strchrnul(path, ';');
 
-	wpath = kmemdup_nul(path, *endptr - path, GFP_KERNEL);
+	wpath = kmemdup_nul(path, *endptr - path, GFP_ATOMIC);
 	if (!wpath)
 		return -ENOMEM;
 
@@ -915,8 +925,8 @@ static void pci_std_enable_acs(struct pci_dev *dev)
 	/* Upstream Forwarding */
 	ctrl |= (cap & PCI_ACS_UF);
 
-	/* Enable Translation Blocking for external devices */
-	if (dev->external_facing || dev->untrusted)
+	/* Enable Translation Blocking for external devices and noats */
+	if (pci_ats_disabled() || dev->external_facing || dev->untrusted)
 		ctrl |= (cap & PCI_ACS_TB);
 
 	pci_write_config_word(dev, pos + PCI_ACS_CTRL, ctrl);
@@ -4629,31 +4639,11 @@ int pci_wait_for_pending_transaction(struct pci_dev *dev)
 EXPORT_SYMBOL(pci_wait_for_pending_transaction);
 
 /**
- * pcie_has_flr - check if a device supports function level resets
- * @dev: device to check
- *
- * Returns true if the device advertises support for PCIe function level
- * resets.
- */
-bool pcie_has_flr(struct pci_dev *dev)
-{
-	u32 cap;
-
-	if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
-		return false;
-
-	pcie_capability_read_dword(dev, PCI_EXP_DEVCAP, &cap);
-	return cap & PCI_EXP_DEVCAP_FLR;
-}
-EXPORT_SYMBOL_GPL(pcie_has_flr);
-
-/**
  * pcie_flr - initiate a PCIe function level reset
  * @dev: device to reset
  *
- * Initiate a function level reset on @dev.  The caller should ensure the
- * device supports FLR before calling this function, e.g. by using the
- * pcie_has_flr() helper.
+ * Initiate a function level reset unconditionally on @dev without
+ * checking any flags and DEVCAP
  */
 int pcie_flr(struct pci_dev *dev)
 {
@@ -4676,7 +4666,29 @@ int pcie_flr(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pcie_flr);
 
-static int pci_af_flr(struct pci_dev *dev, int probe)
+/**
+ * pcie_reset_flr - initiate a PCIe function level reset
+ * @dev: device to reset
+ * @probe: if true, return 0 if device can be reset this way
+ *
+ * Initiate a function level reset on @dev.
+ */
+int pcie_reset_flr(struct pci_dev *dev, bool probe)
+{
+	if (dev->dev_flags & PCI_DEV_FLAGS_NO_FLR_RESET)
+		return -ENOTTY;
+
+	if (!(dev->devcap & PCI_EXP_DEVCAP_FLR))
+		return -ENOTTY;
+
+	if (probe)
+		return 0;
+
+	return pcie_flr(dev);
+}
+EXPORT_SYMBOL_GPL(pcie_reset_flr);
+
+static int pci_af_flr(struct pci_dev *dev, bool probe)
 {
 	int pos;
 	u8 cap;
@@ -4723,7 +4735,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
 /**
  * pci_pm_reset - Put device into PCI_D3 and back into PCI_D0.
  * @dev: Device to reset.
- * @probe: If set, only check if the device can be reset this way.
+ * @probe: if true, return 0 if the device can be reset this way.
  *
  * If @dev supports native PCI PM and its PCI_PM_CTRL_NO_SOFT_RESET flag is
  * unset, it will be reinitialized internally when going from PCI_D3hot to
@@ -4735,7 +4747,7 @@ static int pci_af_flr(struct pci_dev *dev, int probe)
  * by default (i.e. unless the @dev's d3hot_delay field has a different value).
  * Moreover, only devices in D0 can be reset by this function.
  */
-static int pci_pm_reset(struct pci_dev *dev, int probe)
+static int pci_pm_reset(struct pci_dev *dev, bool probe)
 {
 	u16 csr;
 
@@ -4995,7 +5007,7 @@ int pci_bridge_secondary_bus_reset(struct pci_dev *dev)
 }
 EXPORT_SYMBOL_GPL(pci_bridge_secondary_bus_reset);
 
-static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
+static int pci_parent_bus_reset(struct pci_dev *dev, bool probe)
 {
 	struct pci_dev *pdev;
 
@@ -5013,7 +5025,7 @@ static int pci_parent_bus_reset(struct pci_dev *dev, int probe)
 	return pci_bridge_secondary_bus_reset(dev->bus->self);
 }
 
-static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
+static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, bool probe)
 {
 	int rc = -ENOTTY;
 
@@ -5028,7 +5040,7 @@ static int pci_reset_hotplug_slot(struct hotplug_slot *hotplug, int probe)
 	return rc;
 }
 
-static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
+static int pci_dev_reset_slot_function(struct pci_dev *dev, bool probe)
 {
 	if (dev->multifunction || dev->subordinate || !dev->slot ||
 	    dev->dev_flags & PCI_DEV_FLAGS_NO_BUS_RESET)
@@ -5037,7 +5049,7 @@ static int pci_dev_reset_slot_function(struct pci_dev *dev, int probe)
 	return pci_reset_hotplug_slot(dev->slot->hotplug, probe);
 }
 
-static int pci_reset_bus_function(struct pci_dev *dev, int probe)
+static int pci_reset_bus_function(struct pci_dev *dev, bool probe)
 {
 	int rc;
 
@@ -5121,6 +5133,139 @@ static void pci_dev_restore(struct pci_dev *dev)
 		err_handler->reset_done(dev);
 }
 
+/* dev->reset_methods[] is a 0-terminated list of indices into this array */
+static const struct pci_reset_fn_method pci_reset_fn_methods[] = {
+	{ },
+	{ pci_dev_specific_reset, .name = "device_specific" },
+	{ pci_dev_acpi_reset, .name = "acpi" },
+	{ pcie_reset_flr, .name = "flr" },
+	{ pci_af_flr, .name = "af_flr" },
+	{ pci_pm_reset, .name = "pm" },
+	{ pci_reset_bus_function, .name = "bus" },
+};
+
+static ssize_t reset_method_show(struct device *dev,
+				 struct device_attribute *attr, char *buf)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	ssize_t len = 0;
+	int i, m;
+
+	for (i = 0; i < PCI_NUM_RESET_METHODS; i++) {
+		m = pdev->reset_methods[i];
+		if (!m)
+			break;
+
+		len += sysfs_emit_at(buf, len, "%s%s", len ? " " : "",
+				     pci_reset_fn_methods[m].name);
+	}
+
+	if (len)
+		len += sysfs_emit_at(buf, len, "\n");
+
+	return len;
+}
+
+static int reset_method_lookup(const char *name)
+{
+	int m;
+
+	for (m = 1; m < PCI_NUM_RESET_METHODS; m++) {
+		if (sysfs_streq(name, pci_reset_fn_methods[m].name))
+			return m;
+	}
+
+	return 0;	/* not found */
+}
+
+static ssize_t reset_method_store(struct device *dev,
+				  struct device_attribute *attr,
+				  const char *buf, size_t count)
+{
+	struct pci_dev *pdev = to_pci_dev(dev);
+	char *options, *name;
+	int m, n;
+	u8 reset_methods[PCI_NUM_RESET_METHODS] = { 0 };
+
+	if (sysfs_streq(buf, "")) {
+		pdev->reset_methods[0] = 0;
+		pci_warn(pdev, "All device reset methods disabled by user");
+		return count;
+	}
+
+	if (sysfs_streq(buf, "default")) {
+		pci_init_reset_methods(pdev);
+		return count;
+	}
+
+	options = kstrndup(buf, count, GFP_KERNEL);
+	if (!options)
+		return -ENOMEM;
+
+	n = 0;
+	while ((name = strsep(&options, " ")) != NULL) {
+		if (sysfs_streq(name, ""))
+			continue;
+
+		name = strim(name);
+
+		m = reset_method_lookup(name);
+		if (!m) {
+			pci_err(pdev, "Invalid reset method '%s'", name);
+			goto error;
+		}
+
+		if (pci_reset_fn_methods[m].reset_fn(pdev, PCI_RESET_PROBE)) {
+			pci_err(pdev, "Unsupported reset method '%s'", name);
+			goto error;
+		}
+
+		if (n == PCI_NUM_RESET_METHODS - 1) {
+			pci_err(pdev, "Too many reset methods\n");
+			goto error;
+		}
+
+		reset_methods[n++] = m;
+	}
+
+	reset_methods[n] = 0;
+
+	/* Warn if dev-specific supported but not highest priority */
+	if (pci_reset_fn_methods[1].reset_fn(pdev, PCI_RESET_PROBE) == 0 &&
+	    reset_methods[0] != 1)
+		pci_warn(pdev, "Device-specific reset disabled/de-prioritized by user");
+	memcpy(pdev->reset_methods, reset_methods, sizeof(pdev->reset_methods));
+	kfree(options);
+	return count;
+
+error:
+	/* Leave previous methods unchanged */
+	kfree(options);
+	return -EINVAL;
+}
+static DEVICE_ATTR_RW(reset_method);
+
+static struct attribute *pci_dev_reset_method_attrs[] = {
+	&dev_attr_reset_method.attr,
+	NULL,
+};
+
+static umode_t pci_dev_reset_method_attr_is_visible(struct kobject *kobj,
+						    struct attribute *a, int n)
+{
+	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
+
+	if (!pci_reset_supported(pdev))
+		return 0;
+
+	return a->mode;
+}
+
+const struct attribute_group pci_dev_reset_method_attr_group = {
+	.attrs = pci_dev_reset_method_attrs,
+	.is_visible = pci_dev_reset_method_attr_is_visible,
+};
+
 /**
  * __pci_reset_function_locked - reset a PCI device function while holding
  * the @dev mutex lock.
@@ -5143,66 +5288,64 @@ static void pci_dev_restore(struct pci_dev *dev)
  */
 int __pci_reset_function_locked(struct pci_dev *dev)
 {
-	int rc;
+	int i, m, rc = -ENOTTY;
 
 	might_sleep();
 
 	/*
-	 * A reset method returns -ENOTTY if it doesn't support this device
-	 * and we should try the next method.
+	 * A reset method returns -ENOTTY if it doesn't support this device and
+	 * we should try the next method.
 	 *
-	 * If it returns 0 (success), we're finished.  If it returns any
-	 * other error, we're also finished: this indicates that further
-	 * reset mechanisms might be broken on the device.
+	 * If it returns 0 (success), we're finished.  If it returns any other
+	 * error, we're also finished: this indicates that further reset
+	 * mechanisms might be broken on the device.
 	 */
-	rc = pci_dev_specific_reset(dev, 0);
-	if (rc != -ENOTTY)
-		return rc;
-	if (pcie_has_flr(dev)) {
-		rc = pcie_flr(dev);
+	for (i = 0; i < PCI_NUM_RESET_METHODS; i++) {
+		m = dev->reset_methods[i];
+		if (!m)
+			return -ENOTTY;
+
+		rc = pci_reset_fn_methods[m].reset_fn(dev, PCI_RESET_DO_RESET);
+		if (!rc)
+			return 0;
 		if (rc != -ENOTTY)
 			return rc;
 	}
-	rc = pci_af_flr(dev, 0);
-	if (rc != -ENOTTY)
-		return rc;
-	rc = pci_pm_reset(dev, 0);
-	if (rc != -ENOTTY)
-		return rc;
-	return pci_reset_bus_function(dev, 0);
+
+	return -ENOTTY;
 }
 EXPORT_SYMBOL_GPL(__pci_reset_function_locked);
 
 /**
- * pci_probe_reset_function - check whether the device can be safely reset
- * @dev: PCI device to reset
+ * pci_init_reset_methods - check whether device can be safely reset
+ * and store supported reset mechanisms.
+ * @dev: PCI device to check for reset mechanisms
  *
  * Some devices allow an individual function to be reset without affecting
- * other functions in the same device.  The PCI device must be responsive
- * to PCI config space in order to use this function.
+ * other functions in the same device.  The PCI device must be in D0-D3hot
+ * state.
  *
- * Returns 0 if the device function can be reset or negative if the
- * device doesn't support resetting a single function.
+ * Stores reset mechanisms supported by device in reset_methods byte array
+ * which is a member of struct pci_dev.
  */
-int pci_probe_reset_function(struct pci_dev *dev)
+void pci_init_reset_methods(struct pci_dev *dev)
 {
-	int rc;
+	int m, i, rc;
+
+	BUILD_BUG_ON(ARRAY_SIZE(pci_reset_fn_methods) != PCI_NUM_RESET_METHODS);
 
 	might_sleep();
 
-	rc = pci_dev_specific_reset(dev, 1);
-	if (rc != -ENOTTY)
-		return rc;
-	if (pcie_has_flr(dev))
-		return 0;
-	rc = pci_af_flr(dev, 1);
-	if (rc != -ENOTTY)
-		return rc;
-	rc = pci_pm_reset(dev, 1);
-	if (rc != -ENOTTY)
-		return rc;
+	i = 0;
+	for (m = 1; m < PCI_NUM_RESET_METHODS; m++) {
+		rc = pci_reset_fn_methods[m].reset_fn(dev, PCI_RESET_PROBE);
+		if (!rc)
+			dev->reset_methods[i++] = m;
+		else if (rc != -ENOTTY)
+			break;
+	}
 
-	return pci_reset_bus_function(dev, 1);
+	dev->reset_methods[i] = 0;
 }
 
 /**
@@ -5225,7 +5368,7 @@ int pci_reset_function(struct pci_dev *dev)
 {
 	int rc;
 
-	if (!dev->reset_fn)
+	if (!pci_reset_supported(dev))
 		return -ENOTTY;
 
 	pci_dev_lock(dev);
@@ -5261,7 +5404,7 @@ int pci_reset_function_locked(struct pci_dev *dev)
 {
 	int rc;
 
-	if (!dev->reset_fn)
+	if (!pci_reset_supported(dev))
 		return -ENOTTY;
 
 	pci_dev_save_and_disable(dev);
@@ -5284,7 +5427,7 @@ int pci_try_reset_function(struct pci_dev *dev)
 {
 	int rc;
 
-	if (!dev->reset_fn)
+	if (!pci_reset_supported(dev))
 		return -ENOTTY;
 
 	if (!pci_dev_trylock(dev))
@@ -5512,7 +5655,7 @@ static void pci_slot_restore_locked(struct pci_slot *slot)
 	}
 }
 
-static int pci_slot_reset(struct pci_slot *slot, int probe)
+static int pci_slot_reset(struct pci_slot *slot, bool probe)
 {
 	int rc;
 
@@ -5540,7 +5683,7 @@ static int pci_slot_reset(struct pci_slot *slot, int probe)
  */
 int pci_probe_reset_slot(struct pci_slot *slot)
 {
-	return pci_slot_reset(slot, 1);
+	return pci_slot_reset(slot, PCI_RESET_PROBE);
 }
 EXPORT_SYMBOL_GPL(pci_probe_reset_slot);
 
@@ -5563,14 +5706,14 @@ static int __pci_reset_slot(struct pci_slot *slot)
 {
 	int rc;
 
-	rc = pci_slot_reset(slot, 1);
+	rc = pci_slot_reset(slot, PCI_RESET_PROBE);
 	if (rc)
 		return rc;
 
 	if (pci_slot_trylock(slot)) {
 		pci_slot_save_and_disable_locked(slot);
 		might_sleep();
-		rc = pci_reset_hotplug_slot(slot->hotplug, 0);
+		rc = pci_reset_hotplug_slot(slot->hotplug, PCI_RESET_DO_RESET);
 		pci_slot_restore_locked(slot);
 		pci_slot_unlock(slot);
 	} else
@@ -5579,7 +5722,7 @@ static int __pci_reset_slot(struct pci_slot *slot)
 	return rc;
 }
 
-static int pci_bus_reset(struct pci_bus *bus, int probe)
+static int pci_bus_reset(struct pci_bus *bus, bool probe)
 {
 	int ret;
 
@@ -5625,14 +5768,14 @@ int pci_bus_error_reset(struct pci_dev *bridge)
 			goto bus_reset;
 
 	list_for_each_entry(slot, &bus->slots, list)
-		if (pci_slot_reset(slot, 0))
+		if (pci_slot_reset(slot, PCI_RESET_DO_RESET))
 			goto bus_reset;
 
 	mutex_unlock(&pci_slot_mutex);
 	return 0;
 bus_reset:
 	mutex_unlock(&pci_slot_mutex);
-	return pci_bus_reset(bridge->subordinate, 0);
+	return pci_bus_reset(bridge->subordinate, PCI_RESET_DO_RESET);
 }
 
 /**
@@ -5643,7 +5786,7 @@ bus_reset:
  */
 int pci_probe_reset_bus(struct pci_bus *bus)
 {
-	return pci_bus_reset(bus, 1);
+	return pci_bus_reset(bus, PCI_RESET_PROBE);
 }
 EXPORT_SYMBOL_GPL(pci_probe_reset_bus);
 
@@ -5657,7 +5800,7 @@ static int __pci_reset_bus(struct pci_bus *bus)
 {
 	int rc;
 
-	rc = pci_bus_reset(bus, 1);
+	rc = pci_bus_reset(bus, PCI_RESET_PROBE);
 	if (rc)
 		return rc;
 
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 2f52110cac97..1cce56c2aea0 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -33,10 +33,32 @@ enum pci_mmap_api {
 int pci_mmap_fits(struct pci_dev *pdev, int resno, struct vm_area_struct *vmai,
 		  enum pci_mmap_api mmap_api);
 
-int pci_probe_reset_function(struct pci_dev *dev);
+bool pci_reset_supported(struct pci_dev *dev);
+void pci_init_reset_methods(struct pci_dev *dev);
 int pci_bridge_secondary_bus_reset(struct pci_dev *dev);
 int pci_bus_error_reset(struct pci_dev *dev);
 
+struct pci_cap_saved_data {
+	u16		cap_nr;
+	bool		cap_extended;
+	unsigned int	size;
+	u32		data[];
+};
+
+struct pci_cap_saved_state {
+	struct hlist_node		next;
+	struct pci_cap_saved_data	cap;
+};
+
+void pci_allocate_cap_save_buffers(struct pci_dev *dev);
+void pci_free_cap_save_buffers(struct pci_dev *dev);
+int pci_add_cap_save_buffer(struct pci_dev *dev, char cap, unsigned int size);
+int pci_add_ext_cap_save_buffer(struct pci_dev *dev,
+				u16 cap, unsigned int size);
+struct pci_cap_saved_state *pci_find_saved_cap(struct pci_dev *dev, char cap);
+struct pci_cap_saved_state *pci_find_saved_ext_cap(struct pci_dev *dev,
+						   u16 cap);
+
 #define PCI_PM_D2_DELAY         200	/* usec; see PCIe r4.0, sec 5.9.1 */
 #define PCI_PM_D3HOT_WAIT       10	/* msec */
 #define PCI_PM_D3COLD_WAIT      100	/* msec */
@@ -100,8 +122,6 @@ void pci_pm_init(struct pci_dev *dev);
 void pci_ea_init(struct pci_dev *dev);
 void pci_msi_init(struct pci_dev *dev);
 void pci_msix_init(struct pci_dev *dev);
-void pci_allocate_cap_save_buffers(struct pci_dev *dev);
-void pci_free_cap_save_buffers(struct pci_dev *dev);
 bool pci_bridge_d3_possible(struct pci_dev *dev);
 void pci_bridge_d3_update(struct pci_dev *dev);
 void pci_bridge_wait_for_secondary_bus(struct pci_dev *dev);
@@ -604,13 +624,18 @@ static inline void pci_ptm_init(struct pci_dev *dev) { }
 struct pci_dev_reset_methods {
 	u16 vendor;
 	u16 device;
-	int (*reset)(struct pci_dev *dev, int probe);
+	int (*reset)(struct pci_dev *dev, bool probe);
+};
+
+struct pci_reset_fn_method {
+	int (*reset_fn)(struct pci_dev *pdev, bool probe);
+	char *name;
 };
 
 #ifdef CONFIG_PCI_QUIRKS
-int pci_dev_specific_reset(struct pci_dev *dev, int probe);
+int pci_dev_specific_reset(struct pci_dev *dev, bool probe);
 #else
-static inline int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+static inline int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
 {
 	return -ENOTTY;
 }
@@ -698,7 +723,15 @@ static inline int pci_aer_raw_clear_status(struct pci_dev *dev) { return -EINVAL
 #ifdef CONFIG_ACPI
 int pci_acpi_program_hp_params(struct pci_dev *dev);
 extern const struct attribute_group pci_dev_acpi_attr_group;
+void pci_set_acpi_fwnode(struct pci_dev *dev);
+int pci_dev_acpi_reset(struct pci_dev *dev, bool probe);
 #else
+static inline int pci_dev_acpi_reset(struct pci_dev *dev, bool probe)
+{
+	return -ENOTTY;
+}
+
+static inline void pci_set_acpi_fwnode(struct pci_dev *dev) {}
 static inline int pci_acpi_program_hp_params(struct pci_dev *dev)
 {
 	return -ENODEV;
@@ -709,4 +742,6 @@ static inline int pci_acpi_program_hp_params(struct pci_dev *dev)
 extern const struct attribute_group aspm_ctrl_attr_group;
 #endif
 
+extern const struct attribute_group pci_dev_reset_method_attr_group;
+
 #endif /* DRIVERS_PCI_H */
diff --git a/drivers/pci/pcie/aer.c b/drivers/pci/pcie/aer.c
index df4ba9b384c2..9784fdcf3006 100644
--- a/drivers/pci/pcie/aer.c
+++ b/drivers/pci/pcie/aer.c
@@ -1407,13 +1407,11 @@ static pci_ers_result_t aer_root_reset(struct pci_dev *dev)
 	}
 
 	if (type == PCI_EXP_TYPE_RC_EC || type == PCI_EXP_TYPE_RC_END) {
-		if (pcie_has_flr(dev)) {
-			rc = pcie_flr(dev);
-			pci_info(dev, "has been reset (%d)\n", rc);
-		} else {
-			pci_info(dev, "not reset (no FLR support)\n");
-			rc = -ENOTTY;
-		}
+		rc = pcie_reset_flr(dev, PCI_RESET_DO_RESET);
+		if (!rc)
+			pci_info(dev, "has been reset\n");
+		else
+			pci_info(dev, "not reset (no FLR support: %d)\n", rc);
 	} else {
 		rc = pci_bus_error_reset(dev);
 		pci_info(dev, "%s Port link has been reset (%d)\n",
diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c
index e1fed6649c41..3ee63968deaa 100644
--- a/drivers/pci/pcie/portdrv_core.c
+++ b/drivers/pci/pcie/portdrv_core.c
@@ -257,8 +257,13 @@ static int get_port_device_capability(struct pci_dev *dev)
 		services |= PCIE_PORT_SERVICE_DPC;
 
 	if (pci_pcie_type(dev) == PCI_EXP_TYPE_DOWNSTREAM ||
-	    pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT)
-		services |= PCIE_PORT_SERVICE_BWNOTIF;
+	    pci_pcie_type(dev) == PCI_EXP_TYPE_ROOT_PORT) {
+		u32 linkcap;
+
+		pcie_capability_read_dword(dev, PCI_EXP_LNKCAP, &linkcap);
+		if (linkcap & PCI_EXP_LNKCAP_LBNC)
+			services |= PCIE_PORT_SERVICE_BWNOTIF;
+	}
 
 	return services;
 }
diff --git a/drivers/pci/pcie/ptm.c b/drivers/pci/pcie/ptm.c
index 8a4ad974c5ac..368a254e3124 100644
--- a/drivers/pci/pcie/ptm.c
+++ b/drivers/pci/pcie/ptm.c
@@ -60,10 +60,8 @@ void pci_save_ptm_state(struct pci_dev *dev)
 		return;
 
 	save_state = pci_find_saved_ext_cap(dev, PCI_EXT_CAP_ID_PTM);
-	if (!save_state) {
-		pci_err(dev, "no suspend buffer for PTM\n");
+	if (!save_state)
 		return;
-	}
 
 	cap = (u16 *)&save_state->cap.data[0];
 	pci_read_config_word(dev, ptm + PCI_PTM_CTRL, cap);
diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c
index 79177ac37880..d9fc02a71baa 100644
--- a/drivers/pci/probe.c
+++ b/drivers/pci/probe.c
@@ -19,6 +19,7 @@
 #include <linux/hypervisor.h>
 #include <linux/irqdomain.h>
 #include <linux/pm_runtime.h>
+#include <linux/bitfield.h>
 #include "pci.h"
 
 #define CARDBUS_LATENCY_TIMER	176	/* secondary latency timer */
@@ -594,6 +595,7 @@ static void pci_init_host_bridge(struct pci_host_bridge *bridge)
 	bridge->native_pme = 1;
 	bridge->native_ltr = 1;
 	bridge->native_dpc = 1;
+	bridge->domain_nr = PCI_DOMAIN_NR_NOT_SET;
 
 	device_initialize(&bridge->dev);
 }
@@ -828,11 +830,15 @@ static struct irq_domain *pci_host_bridge_msi_domain(struct pci_bus *bus)
 {
 	struct irq_domain *d;
 
+	/* If the host bridge driver sets a MSI domain of the bridge, use it */
+	d = dev_get_msi_domain(bus->bridge);
+
 	/*
 	 * Any firmware interface that can resolve the msi_domain
 	 * should be called from here.
 	 */
-	d = pci_host_bridge_of_msi_domain(bus);
+	if (!d)
+		d = pci_host_bridge_of_msi_domain(bus);
 	if (!d)
 		d = pci_host_bridge_acpi_msi_domain(bus);
 
@@ -898,7 +904,10 @@ static int pci_register_host_bridge(struct pci_host_bridge *bridge)
 	bus->ops = bridge->ops;
 	bus->number = bus->busn_res.start = bridge->busnr;
 #ifdef CONFIG_PCI_DOMAINS_GENERIC
-	bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	if (bridge->domain_nr == PCI_DOMAIN_NR_NOT_SET)
+		bus->domain_nr = pci_bus_find_domain_nr(bus, parent);
+	else
+		bus->domain_nr = bridge->domain_nr;
 #endif
 
 	b = pci_find_bus(pci_domain_nr(bus), bridge->busnr);
@@ -1498,8 +1507,8 @@ void set_pcie_port_type(struct pci_dev *pdev)
 	pdev->pcie_cap = pos;
 	pci_read_config_word(pdev, pos + PCI_EXP_FLAGS, &reg16);
 	pdev->pcie_flags_reg = reg16;
-	pci_read_config_word(pdev, pos + PCI_EXP_DEVCAP, &reg16);
-	pdev->pcie_mpss = reg16 & PCI_EXP_DEVCAP_PAYLOAD;
+	pci_read_config_dword(pdev, pos + PCI_EXP_DEVCAP, &pdev->devcap);
+	pdev->pcie_mpss = FIELD_GET(PCI_EXP_DEVCAP_PAYLOAD, pdev->devcap);
 
 	parent = pci_upstream_bridge(pdev);
 	if (!parent)
@@ -1809,6 +1818,9 @@ int pci_setup_device(struct pci_dev *dev)
 	dev->error_state = pci_channel_io_normal;
 	set_pcie_port_type(dev);
 
+	pci_set_of_node(dev);
+	pci_set_acpi_fwnode(dev);
+
 	pci_dev_assign_slot(dev);
 
 	/*
@@ -1946,6 +1958,7 @@ int pci_setup_device(struct pci_dev *dev)
 	default:				    /* unknown header */
 		pci_err(dev, "unknown header type %02x, ignoring device\n",
 			dev->hdr_type);
+		pci_release_of_node(dev);
 		return -EIO;
 
 	bad:
@@ -2225,7 +2238,6 @@ static void pci_release_capabilities(struct pci_dev *dev)
 {
 	pci_aer_exit(dev);
 	pci_rcec_exit(dev);
-	pci_vpd_release(dev);
 	pci_iov_release(dev);
 	pci_free_cap_save_buffers(dev);
 }
@@ -2374,10 +2386,7 @@ static struct pci_dev *pci_scan_device(struct pci_bus *bus, int devfn)
 	dev->vendor = l & 0xffff;
 	dev->device = (l >> 16) & 0xffff;
 
-	pci_set_of_node(dev);
-
 	if (pci_setup_device(dev)) {
-		pci_release_of_node(dev);
 		pci_bus_put(dev->bus);
 		kfree(dev);
 		return NULL;
@@ -2428,9 +2437,7 @@ static void pci_init_capabilities(struct pci_dev *dev)
 	pci_rcec_init(dev);		/* Root Complex Event Collector */
 
 	pcie_report_downtraining(dev);
-
-	if (pci_probe_reset_function(dev) == 0)
-		dev->reset_fn = 1;
+	pci_init_reset_methods(dev);
 }
 
 /*
diff --git a/drivers/pci/proc.c b/drivers/pci/proc.c
index d32fbfc93ea9..cb18f8a13ab6 100644
--- a/drivers/pci/proc.c
+++ b/drivers/pci/proc.c
@@ -83,6 +83,7 @@ static ssize_t proc_bus_pci_read(struct file *file, char __user *buf,
 		buf += 4;
 		pos += 4;
 		cnt -= 4;
+		cond_resched();
 	}
 
 	if (cnt >= 2) {
diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c
index ab3de1551b50..e5089af8ad90 100644
--- a/drivers/pci/quirks.c
+++ b/drivers/pci/quirks.c
@@ -1822,6 +1822,45 @@ DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL,	PCI_DEVICE_ID_INTEL_E7525_MCH,	quir
 DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_HUAWEI, 0x1610, PCI_CLASS_BRIDGE_PCI, 8, quirk_pcie_mch);
 
 /*
+ * HiSilicon KunPeng920 and KunPeng930 have devices appear as PCI but are
+ * actually on the AMBA bus. These fake PCI devices can support SVA via
+ * SMMU stall feature, by setting dma-can-stall for ACPI platforms.
+ *
+ * Normally stalling must not be enabled for PCI devices, since it would
+ * break the PCI requirement for free-flowing writes and may lead to
+ * deadlock.  We expect PCI devices to support ATS and PRI if they want to
+ * be fault-tolerant, so there's no ACPI binding to describe anything else,
+ * even when a "PCI" device turns out to be a regular old SoC device
+ * dressed up as a RCiEP and normal rules don't apply.
+ */
+static void quirk_huawei_pcie_sva(struct pci_dev *pdev)
+{
+	struct property_entry properties[] = {
+		PROPERTY_ENTRY_BOOL("dma-can-stall"),
+		{},
+	};
+
+	if (pdev->revision != 0x21 && pdev->revision != 0x30)
+		return;
+
+	pdev->pasid_no_tlp = 1;
+
+	/*
+	 * Set the dma-can-stall property on ACPI platforms. Device tree
+	 * can set it directly.
+	 */
+	if (!pdev->dev.of_node &&
+	    device_add_properties(&pdev->dev, properties))
+		pci_warn(pdev, "could not add stall property");
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa250, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa251, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa255, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa256, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa258, quirk_huawei_pcie_sva);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_HUAWEI, 0xa259, quirk_huawei_pcie_sva);
+
+/*
  * It's possible for the MSI to get corrupted if SHPC and ACPI are used
  * together on certain PXH-based systems.
  */
@@ -3235,12 +3274,13 @@ static void fixup_mpss_256(struct pci_dev *dev)
 {
 	dev->pcie_mpss = 1; /* 256 bytes */
 }
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SOLARFLARE,
-			 PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000A_0, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000A_1, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_SOLARFLARE,
+			PCI_DEVICE_ID_SOLARFLARE_SFC4000B, fixup_mpss_256);
+DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_ASMEDIA, 0x0612, fixup_mpss_256);
 
 /*
  * Intel 5000 and 5100 Memory controllers have an erratum with read completion
@@ -3703,7 +3743,7 @@ DECLARE_PCI_FIXUP_SUSPEND_LATE(PCI_VENDOR_ID_INTEL,
  * reset a single function if other methods (e.g. FLR, PM D0->D3) are
  * not available.
  */
-static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
+static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, bool probe)
 {
 	/*
 	 * http://www.intel.com/content/dam/doc/datasheet/82599-10-gbe-controller-datasheet.pdf
@@ -3725,7 +3765,7 @@ static int reset_intel_82599_sfp_virtfn(struct pci_dev *dev, int probe)
 #define NSDE_PWR_STATE		0xd0100
 #define IGD_OPERATION_TIMEOUT	10000     /* set timeout 10 seconds */
 
-static int reset_ivb_igd(struct pci_dev *dev, int probe)
+static int reset_ivb_igd(struct pci_dev *dev, bool probe)
 {
 	void __iomem *mmio_base;
 	unsigned long timeout;
@@ -3768,7 +3808,7 @@ reset_complete:
 }
 
 /* Device-specific reset method for Chelsio T4-based adapters */
-static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
+static int reset_chelsio_generic_dev(struct pci_dev *dev, bool probe)
 {
 	u16 old_command;
 	u16 msix_flags;
@@ -3846,14 +3886,14 @@ static int reset_chelsio_generic_dev(struct pci_dev *dev, int probe)
  *    Chapter 3: NVMe control registers
  *    Chapter 7.3: Reset behavior
  */
-static int nvme_disable_and_flr(struct pci_dev *dev, int probe)
+static int nvme_disable_and_flr(struct pci_dev *dev, bool probe)
 {
 	void __iomem *bar;
 	u16 cmd;
 	u32 cfg;
 
 	if (dev->class != PCI_CLASS_STORAGE_EXPRESS ||
-	    !pcie_has_flr(dev) || !pci_resource_start(dev, 0))
+	    pcie_reset_flr(dev, PCI_RESET_PROBE) || !pci_resource_start(dev, 0))
 		return -ENOTTY;
 
 	if (probe)
@@ -3920,15 +3960,12 @@ static int nvme_disable_and_flr(struct pci_dev *dev, int probe)
  * device too soon after FLR.  A 250ms delay after FLR has heuristically
  * proven to produce reliably working results for device assignment cases.
  */
-static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
+static int delay_250ms_after_flr(struct pci_dev *dev, bool probe)
 {
-	if (!pcie_has_flr(dev))
-		return -ENOTTY;
-
 	if (probe)
-		return 0;
+		return pcie_reset_flr(dev, PCI_RESET_PROBE);
 
-	pcie_flr(dev);
+	pcie_reset_flr(dev, PCI_RESET_DO_RESET);
 
 	msleep(250);
 
@@ -3943,7 +3980,7 @@ static int delay_250ms_after_flr(struct pci_dev *dev, int probe)
 #define HINIC_OPERATION_TIMEOUT     15000	/* 15 seconds */
 
 /* Device-specific reset method for Huawei Intelligent NIC virtual functions */
-static int reset_hinic_vf_dev(struct pci_dev *pdev, int probe)
+static int reset_hinic_vf_dev(struct pci_dev *pdev, bool probe)
 {
 	unsigned long timeout;
 	void __iomem *bar;
@@ -4020,7 +4057,7 @@ static const struct pci_dev_reset_methods pci_dev_reset_methods[] = {
  * because when a host assigns a device to a guest VM, the host may need
  * to reset the device but probably doesn't have a driver for it.
  */
-int pci_dev_specific_reset(struct pci_dev *dev, int probe)
+int pci_dev_specific_reset(struct pci_dev *dev, bool probe)
 {
 	const struct pci_dev_reset_methods *i;
 
@@ -4615,6 +4652,18 @@ static int pci_quirk_qcom_rp_acs(struct pci_dev *dev, u16 acs_flags)
 		PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
 }
 
+/*
+ * Each of these NXP Root Ports is in a Root Complex with a unique segment
+ * number and does provide isolation features to disable peer transactions
+ * and validate bus numbers in requests, but does not provide an ACS
+ * capability.
+ */
+static int pci_quirk_nxp_rp_acs(struct pci_dev *dev, u16 acs_flags)
+{
+	return pci_acs_ctrl_enabled(acs_flags,
+		PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF);
+}
+
 static int pci_quirk_al_acs(struct pci_dev *dev, u16 acs_flags)
 {
 	if (pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT)
@@ -4841,6 +4890,10 @@ static const struct pci_dev_acs_enabled {
 	{ 0x10df, 0x720, pci_quirk_mf_endpoint_acs }, /* Emulex Skyhawk-R */
 	/* Cavium ThunderX */
 	{ PCI_VENDOR_ID_CAVIUM, PCI_ANY_ID, pci_quirk_cavium_acs },
+	/* Cavium multi-function devices */
+	{ PCI_VENDOR_ID_CAVIUM, 0xA026, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA059, pci_quirk_mf_endpoint_acs },
+	{ PCI_VENDOR_ID_CAVIUM, 0xA060, pci_quirk_mf_endpoint_acs },
 	/* APM X-Gene */
 	{ PCI_VENDOR_ID_AMCC, 0xE004, pci_quirk_xgene_acs },
 	/* Ampere Computing */
@@ -4861,6 +4914,39 @@ static const struct pci_dev_acs_enabled {
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x3038, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x3104, pci_quirk_mf_endpoint_acs },
 	{ PCI_VENDOR_ID_ZHAOXIN, 0x9083, pci_quirk_mf_endpoint_acs },
+	/* NXP root ports, xx=16, 12, or 08 cores */
+	/* LX2xx0A : without security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d81, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da1, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d83, pci_quirk_nxp_rp_acs },
+	/* LX2xx0C : security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d80, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da0, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d82, pci_quirk_nxp_rp_acs },
+	/* LX2xx0E : security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d90, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db0, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d92, pci_quirk_nxp_rp_acs },
+	/* LX2xx0N : without security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d91, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db1, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d93, pci_quirk_nxp_rp_acs },
+	/* LX2xx2A : without security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d89, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da9, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d8b, pci_quirk_nxp_rp_acs },
+	/* LX2xx2C : security features + CAN-FD */
+	{ PCI_VENDOR_ID_NXP, 0x8d88, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8da8, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d8a, pci_quirk_nxp_rp_acs },
+	/* LX2xx2E : security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d98, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db8, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d9a, pci_quirk_nxp_rp_acs },
+	/* LX2xx2N : without security features + CAN */
+	{ PCI_VENDOR_ID_NXP, 0x8d99, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8db9, pci_quirk_nxp_rp_acs },
+	{ PCI_VENDOR_ID_NXP, 0x8d9b, pci_quirk_nxp_rp_acs },
 	/* Zhaoxin Root/Downstream Ports */
 	{ PCI_VENDOR_ID_ZHAOXIN, PCI_ANY_ID, pci_quirk_zhaoxin_pcie_ports_acs },
 	{ 0 }
@@ -5032,7 +5118,7 @@ static int pci_quirk_enable_intel_spt_pch_acs(struct pci_dev *dev)
 	ctrl |= (cap & PCI_ACS_CR);
 	ctrl |= (cap & PCI_ACS_UF);
 
-	if (dev->external_facing || dev->untrusted)
+	if (pci_ats_disabled() || dev->external_facing || dev->untrusted)
 		ctrl |= (cap & PCI_ACS_TB);
 
 	pci_write_config_dword(dev, pos + INTEL_SPT_ACS_CTRL, ctrl);
@@ -5630,7 +5716,7 @@ static void quirk_reset_lenovo_thinkpad_p50_nvgpu(struct pci_dev *pdev)
 
 	if (pdev->subsystem_vendor != PCI_VENDOR_ID_LENOVO ||
 	    pdev->subsystem_device != 0x222e ||
-	    !pdev->reset_fn)
+	    !pci_reset_supported(pdev))
 		return;
 
 	if (pci_enable_device_mem(pdev))
diff --git a/drivers/pci/remove.c b/drivers/pci/remove.c
index dd12c2fcc7dc..4c54c75050dc 100644
--- a/drivers/pci/remove.c
+++ b/drivers/pci/remove.c
@@ -19,7 +19,6 @@ static void pci_stop_dev(struct pci_dev *dev)
 	pci_pme_active(dev, false);
 
 	if (pci_dev_is_added(dev)) {
-		dev->reset_fn = 0;
 
 		device_release_driver(&dev->dev);
 		pci_proc_detach_device(dev);
diff --git a/drivers/pci/syscall.c b/drivers/pci/syscall.c
index 8b003c890b87..61a6fe3cde21 100644
--- a/drivers/pci/syscall.c
+++ b/drivers/pci/syscall.c
@@ -19,11 +19,12 @@ SYSCALL_DEFINE5(pciconfig_read, unsigned long, bus, unsigned long, dfn,
 	u8 byte;
 	u16 word;
 	u32 dword;
-	long err;
-	int cfg_ret;
+	int err, cfg_ret;
 
+	err = -EPERM;
+	dev = NULL;
 	if (!capable(CAP_SYS_ADMIN))
-		return -EPERM;
+		goto error;
 
 	err = -ENODEV;
 	dev = pci_get_domain_bus_and_slot(0, bus, dfn);
diff --git a/drivers/pci/vpd.c b/drivers/pci/vpd.c
index 26bf7c877de5..25557b272a4f 100644
--- a/drivers/pci/vpd.c
+++ b/drivers/pci/vpd.c
@@ -9,116 +9,94 @@
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/sched/signal.h>
+#include <asm/unaligned.h>
 #include "pci.h"
 
-/* VPD access through PCI 2.2+ VPD capability */
+#define PCI_VPD_LRDT_TAG_SIZE		3
+#define PCI_VPD_SRDT_LEN_MASK		0x07
+#define PCI_VPD_SRDT_TAG_SIZE		1
+#define PCI_VPD_STIN_END		0x0f
+#define PCI_VPD_INFO_FLD_HDR_SIZE	3
 
-struct pci_vpd_ops {
-	ssize_t (*read)(struct pci_dev *dev, loff_t pos, size_t count, void *buf);
-	ssize_t (*write)(struct pci_dev *dev, loff_t pos, size_t count, const void *buf);
-};
+static u16 pci_vpd_lrdt_size(const u8 *lrdt)
+{
+	return get_unaligned_le16(lrdt + 1);
+}
 
-struct pci_vpd {
-	const struct pci_vpd_ops *ops;
-	struct mutex	lock;
-	unsigned int	len;
-	u16		flag;
-	u8		cap;
-	unsigned int	busy:1;
-	unsigned int	valid:1;
-};
+static u8 pci_vpd_srdt_tag(const u8 *srdt)
+{
+	return *srdt >> 3;
+}
 
-static struct pci_dev *pci_get_func0_dev(struct pci_dev *dev)
+static u8 pci_vpd_srdt_size(const u8 *srdt)
 {
-	return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
+	return *srdt & PCI_VPD_SRDT_LEN_MASK;
 }
 
-/**
- * pci_read_vpd - Read one entry from Vital Product Data
- * @dev:	pci device struct
- * @pos:	offset in vpd space
- * @count:	number of bytes to read
- * @buf:	pointer to where to store result
- */
-ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
+static u8 pci_vpd_info_field_size(const u8 *info_field)
 {
-	if (!dev->vpd || !dev->vpd->ops)
-		return -ENODEV;
-	return dev->vpd->ops->read(dev, pos, count, buf);
+	return info_field[2];
 }
-EXPORT_SYMBOL(pci_read_vpd);
 
-/**
- * pci_write_vpd - Write entry to Vital Product Data
- * @dev:	pci device struct
- * @pos:	offset in vpd space
- * @count:	number of bytes to write
- * @buf:	buffer containing write data
- */
-ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
+/* VPD access through PCI 2.2+ VPD capability */
+
+static struct pci_dev *pci_get_func0_dev(struct pci_dev *dev)
 {
-	if (!dev->vpd || !dev->vpd->ops)
-		return -ENODEV;
-	return dev->vpd->ops->write(dev, pos, count, buf);
+	return pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
 }
-EXPORT_SYMBOL(pci_write_vpd);
 
-#define PCI_VPD_MAX_SIZE (PCI_VPD_ADDR_MASK + 1)
+#define PCI_VPD_MAX_SIZE	(PCI_VPD_ADDR_MASK + 1)
+#define PCI_VPD_SZ_INVALID	UINT_MAX
 
 /**
  * pci_vpd_size - determine actual size of Vital Product Data
  * @dev:	pci device struct
- * @old_size:	current assumed size, also maximum allowed size
  */
-static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size)
+static size_t pci_vpd_size(struct pci_dev *dev)
 {
-	size_t off = 0;
-	unsigned char header[1+2];	/* 1 byte tag, 2 bytes length */
+	size_t off = 0, size;
+	unsigned char tag, header[1+2];	/* 1 byte tag, 2 bytes length */
 
-	while (off < old_size && pci_read_vpd(dev, off, 1, header) == 1) {
-		unsigned char tag;
+	/* Otherwise the following reads would fail. */
+	dev->vpd.len = PCI_VPD_MAX_SIZE;
 
-		if (!header[0] && !off) {
-			pci_info(dev, "Invalid VPD tag 00, assume missing optional VPD EPROM\n");
-			return 0;
-		}
+	while (pci_read_vpd(dev, off, 1, header) == 1) {
+		size = 0;
+
+		if (off == 0 && (header[0] == 0x00 || header[0] == 0xff))
+			goto error;
 
 		if (header[0] & PCI_VPD_LRDT) {
 			/* Large Resource Data Type Tag */
-			tag = pci_vpd_lrdt_tag(header);
-			/* Only read length from known tag items */
-			if ((tag == PCI_VPD_LTIN_ID_STRING) ||
-			    (tag == PCI_VPD_LTIN_RO_DATA) ||
-			    (tag == PCI_VPD_LTIN_RW_DATA)) {
-				if (pci_read_vpd(dev, off+1, 2,
-						 &header[1]) != 2) {
-					pci_warn(dev, "invalid large VPD tag %02x size at offset %zu",
-						 tag, off + 1);
-					return 0;
-				}
-				off += PCI_VPD_LRDT_TAG_SIZE +
-					pci_vpd_lrdt_size(header);
+			if (pci_read_vpd(dev, off + 1, 2, &header[1]) != 2) {
+				pci_warn(dev, "failed VPD read at offset %zu\n",
+					 off + 1);
+				return off ?: PCI_VPD_SZ_INVALID;
 			}
+			size = pci_vpd_lrdt_size(header);
+			if (off + size > PCI_VPD_MAX_SIZE)
+				goto error;
+
+			off += PCI_VPD_LRDT_TAG_SIZE + size;
 		} else {
 			/* Short Resource Data Type Tag */
-			off += PCI_VPD_SRDT_TAG_SIZE +
-				pci_vpd_srdt_size(header);
 			tag = pci_vpd_srdt_tag(header);
-		}
-
-		if (tag == PCI_VPD_STIN_END)	/* End tag descriptor */
-			return off;
+			size = pci_vpd_srdt_size(header);
+			if (off + size > PCI_VPD_MAX_SIZE)
+				goto error;
 
-		if ((tag != PCI_VPD_LTIN_ID_STRING) &&
-		    (tag != PCI_VPD_LTIN_RO_DATA) &&
-		    (tag != PCI_VPD_LTIN_RW_DATA)) {
-			pci_warn(dev, "invalid %s VPD tag %02x at offset %zu",
-				 (header[0] & PCI_VPD_LRDT) ? "large" : "short",
-				 tag, off);
-			return 0;
+			off += PCI_VPD_SRDT_TAG_SIZE + size;
+			if (tag == PCI_VPD_STIN_END)	/* End tag descriptor */
+				return off;
 		}
 	}
-	return 0;
+	return off;
+
+error:
+	pci_info(dev, "invalid VPD tag %#04x (size %zu) at offset %zu%s\n",
+		 header[0], size, off, off == 0 ?
+		 "; assume missing optional EEPROM" : "");
+	return off ?: PCI_VPD_SZ_INVALID;
 }
 
 /*
@@ -126,33 +104,26 @@ static size_t pci_vpd_size(struct pci_dev *dev, size_t old_size)
  * This code has to spin since there is no other notification from the PCI
  * hardware. Since the VPD is often implemented by serial attachment to an
  * EEPROM, it may take many milliseconds to complete.
+ * @set: if true wait for flag to be set, else wait for it to be cleared
  *
  * Returns 0 on success, negative values indicate error.
  */
-static int pci_vpd_wait(struct pci_dev *dev)
+static int pci_vpd_wait(struct pci_dev *dev, bool set)
 {
-	struct pci_vpd *vpd = dev->vpd;
+	struct pci_vpd *vpd = &dev->vpd;
 	unsigned long timeout = jiffies + msecs_to_jiffies(125);
 	unsigned long max_sleep = 16;
 	u16 status;
 	int ret;
 
-	if (!vpd->busy)
-		return 0;
-
 	do {
 		ret = pci_user_read_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						&status);
 		if (ret < 0)
 			return ret;
 
-		if ((status & PCI_VPD_ADDR_F) == vpd->flag) {
-			vpd->busy = 0;
+		if (!!(status & PCI_VPD_ADDR_F) == set)
 			return 0;
-		}
-
-		if (fatal_signal_pending(current))
-			return -EINTR;
 
 		if (time_after(jiffies, timeout))
 			break;
@@ -169,22 +140,17 @@ static int pci_vpd_wait(struct pci_dev *dev)
 static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
 			    void *arg)
 {
-	struct pci_vpd *vpd = dev->vpd;
-	int ret;
+	struct pci_vpd *vpd = &dev->vpd;
+	int ret = 0;
 	loff_t end = pos + count;
 	u8 *buf = arg;
 
+	if (!vpd->cap)
+		return -ENODEV;
+
 	if (pos < 0)
 		return -EINVAL;
 
-	if (!vpd->valid) {
-		vpd->valid = 1;
-		vpd->len = pci_vpd_size(dev, vpd->len);
-	}
-
-	if (vpd->len == 0)
-		return -EIO;
-
 	if (pos > vpd->len)
 		return 0;
 
@@ -196,21 +162,20 @@ static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
 	if (mutex_lock_killable(&vpd->lock))
 		return -EINTR;
 
-	ret = pci_vpd_wait(dev);
-	if (ret < 0)
-		goto out;
-
 	while (pos < end) {
 		u32 val;
 		unsigned int i, skip;
 
+		if (fatal_signal_pending(current)) {
+			ret = -EINTR;
+			break;
+		}
+
 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
 						 pos & ~3);
 		if (ret < 0)
 			break;
-		vpd->busy = 1;
-		vpd->flag = PCI_VPD_ADDR_F;
-		ret = pci_vpd_wait(dev);
+		ret = pci_vpd_wait(dev, true);
 		if (ret < 0)
 			break;
 
@@ -228,7 +193,7 @@ static ssize_t pci_vpd_read(struct pci_dev *dev, loff_t pos, size_t count,
 			val >>= 8;
 		}
 	}
-out:
+
 	mutex_unlock(&vpd->lock);
 	return ret ? ret : count;
 }
@@ -236,41 +201,26 @@ out:
 static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
 			     const void *arg)
 {
-	struct pci_vpd *vpd = dev->vpd;
+	struct pci_vpd *vpd = &dev->vpd;
 	const u8 *buf = arg;
 	loff_t end = pos + count;
 	int ret = 0;
 
+	if (!vpd->cap)
+		return -ENODEV;
+
 	if (pos < 0 || (pos & 3) || (count & 3))
 		return -EINVAL;
 
-	if (!vpd->valid) {
-		vpd->valid = 1;
-		vpd->len = pci_vpd_size(dev, vpd->len);
-	}
-
-	if (vpd->len == 0)
-		return -EIO;
-
 	if (end > vpd->len)
 		return -EINVAL;
 
 	if (mutex_lock_killable(&vpd->lock))
 		return -EINTR;
 
-	ret = pci_vpd_wait(dev);
-	if (ret < 0)
-		goto out;
-
 	while (pos < end) {
-		u32 val;
-
-		val = *buf++;
-		val |= *buf++ << 8;
-		val |= *buf++ << 16;
-		val |= *buf++ << 24;
-
-		ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA, val);
+		ret = pci_user_write_config_dword(dev, vpd->cap + PCI_VPD_DATA,
+						  get_unaligned_le32(buf));
 		if (ret < 0)
 			break;
 		ret = pci_user_write_config_word(dev, vpd->cap + PCI_VPD_ADDR,
@@ -278,85 +228,28 @@ static ssize_t pci_vpd_write(struct pci_dev *dev, loff_t pos, size_t count,
 		if (ret < 0)
 			break;
 
-		vpd->busy = 1;
-		vpd->flag = 0;
-		ret = pci_vpd_wait(dev);
+		ret = pci_vpd_wait(dev, false);
 		if (ret < 0)
 			break;
 
+		buf += sizeof(u32);
 		pos += sizeof(u32);
 	}
-out:
+
 	mutex_unlock(&vpd->lock);
 	return ret ? ret : count;
 }
 
-static const struct pci_vpd_ops pci_vpd_ops = {
-	.read = pci_vpd_read,
-	.write = pci_vpd_write,
-};
-
-static ssize_t pci_vpd_f0_read(struct pci_dev *dev, loff_t pos, size_t count,
-			       void *arg)
-{
-	struct pci_dev *tdev = pci_get_func0_dev(dev);
-	ssize_t ret;
-
-	if (!tdev)
-		return -ENODEV;
-
-	ret = pci_read_vpd(tdev, pos, count, arg);
-	pci_dev_put(tdev);
-	return ret;
-}
-
-static ssize_t pci_vpd_f0_write(struct pci_dev *dev, loff_t pos, size_t count,
-				const void *arg)
-{
-	struct pci_dev *tdev = pci_get_func0_dev(dev);
-	ssize_t ret;
-
-	if (!tdev)
-		return -ENODEV;
-
-	ret = pci_write_vpd(tdev, pos, count, arg);
-	pci_dev_put(tdev);
-	return ret;
-}
-
-static const struct pci_vpd_ops pci_vpd_f0_ops = {
-	.read = pci_vpd_f0_read,
-	.write = pci_vpd_f0_write,
-};
-
 void pci_vpd_init(struct pci_dev *dev)
 {
-	struct pci_vpd *vpd;
-	u8 cap;
+	dev->vpd.cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
+	mutex_init(&dev->vpd.lock);
 
-	cap = pci_find_capability(dev, PCI_CAP_ID_VPD);
-	if (!cap)
-		return;
-
-	vpd = kzalloc(sizeof(*vpd), GFP_ATOMIC);
-	if (!vpd)
-		return;
-
-	vpd->len = PCI_VPD_MAX_SIZE;
-	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0)
-		vpd->ops = &pci_vpd_f0_ops;
-	else
-		vpd->ops = &pci_vpd_ops;
-	mutex_init(&vpd->lock);
-	vpd->cap = cap;
-	vpd->busy = 0;
-	vpd->valid = 0;
-	dev->vpd = vpd;
-}
+	if (!dev->vpd.len)
+		dev->vpd.len = pci_vpd_size(dev);
 
-void pci_vpd_release(struct pci_dev *dev)
-{
-	kfree(dev->vpd);
+	if (dev->vpd.len == PCI_VPD_SZ_INVALID)
+		dev->vpd.cap = 0;
 }
 
 static ssize_t vpd_read(struct file *filp, struct kobject *kobj,
@@ -388,7 +281,7 @@ static umode_t vpd_attr_is_visible(struct kobject *kobj,
 {
 	struct pci_dev *pdev = to_pci_dev(kobj_to_dev(kobj));
 
-	if (!pdev->vpd)
+	if (!pdev->vpd.cap)
 		return 0;
 
 	return a->attr.mode;
@@ -399,23 +292,63 @@ const struct attribute_group pci_dev_vpd_attr_group = {
 	.is_bin_visible = vpd_attr_is_visible,
 };
 
-int pci_vpd_find_tag(const u8 *buf, unsigned int len, u8 rdt)
+void *pci_vpd_alloc(struct pci_dev *dev, unsigned int *size)
+{
+	unsigned int len = dev->vpd.len;
+	void *buf;
+	int cnt;
+
+	if (!dev->vpd.cap)
+		return ERR_PTR(-ENODEV);
+
+	buf = kmalloc(len, GFP_KERNEL);
+	if (!buf)
+		return ERR_PTR(-ENOMEM);
+
+	cnt = pci_read_vpd(dev, 0, len, buf);
+	if (cnt != len) {
+		kfree(buf);
+		return ERR_PTR(-EIO);
+	}
+
+	if (size)
+		*size = len;
+
+	return buf;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_alloc);
+
+static int pci_vpd_find_tag(const u8 *buf, unsigned int len, u8 rdt, unsigned int *size)
 {
 	int i = 0;
 
 	/* look for LRDT tags only, end tag is the only SRDT tag */
 	while (i + PCI_VPD_LRDT_TAG_SIZE <= len && buf[i] & PCI_VPD_LRDT) {
-		if (buf[i] == rdt)
+		unsigned int lrdt_len = pci_vpd_lrdt_size(buf + i);
+		u8 tag = buf[i];
+
+		i += PCI_VPD_LRDT_TAG_SIZE;
+		if (tag == rdt) {
+			if (i + lrdt_len > len)
+				lrdt_len = len - i;
+			if (size)
+				*size = lrdt_len;
 			return i;
+		}
 
-		i += PCI_VPD_LRDT_TAG_SIZE + pci_vpd_lrdt_size(buf + i);
+		i += lrdt_len;
 	}
 
 	return -ENOENT;
 }
-EXPORT_SYMBOL_GPL(pci_vpd_find_tag);
 
-int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
+int pci_vpd_find_id_string(const u8 *buf, unsigned int len, unsigned int *size)
+{
+	return pci_vpd_find_tag(buf, len, PCI_VPD_LRDT_ID_STRING, size);
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_id_string);
+
+static int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
 			      unsigned int len, const char *kw)
 {
 	int i;
@@ -431,7 +364,106 @@ int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
 
 	return -ENOENT;
 }
-EXPORT_SYMBOL_GPL(pci_vpd_find_info_keyword);
+
+/**
+ * pci_read_vpd - Read one entry from Vital Product Data
+ * @dev:	PCI device struct
+ * @pos:	offset in VPD space
+ * @count:	number of bytes to read
+ * @buf:	pointer to where to store result
+ */
+ssize_t pci_read_vpd(struct pci_dev *dev, loff_t pos, size_t count, void *buf)
+{
+	ssize_t ret;
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) {
+		dev = pci_get_func0_dev(dev);
+		if (!dev)
+			return -ENODEV;
+
+		ret = pci_vpd_read(dev, pos, count, buf);
+		pci_dev_put(dev);
+		return ret;
+	}
+
+	return pci_vpd_read(dev, pos, count, buf);
+}
+EXPORT_SYMBOL(pci_read_vpd);
+
+/**
+ * pci_write_vpd - Write entry to Vital Product Data
+ * @dev:	PCI device struct
+ * @pos:	offset in VPD space
+ * @count:	number of bytes to write
+ * @buf:	buffer containing write data
+ */
+ssize_t pci_write_vpd(struct pci_dev *dev, loff_t pos, size_t count, const void *buf)
+{
+	ssize_t ret;
+
+	if (dev->dev_flags & PCI_DEV_FLAGS_VPD_REF_F0) {
+		dev = pci_get_func0_dev(dev);
+		if (!dev)
+			return -ENODEV;
+
+		ret = pci_vpd_write(dev, pos, count, buf);
+		pci_dev_put(dev);
+		return ret;
+	}
+
+	return pci_vpd_write(dev, pos, count, buf);
+}
+EXPORT_SYMBOL(pci_write_vpd);
+
+int pci_vpd_find_ro_info_keyword(const void *buf, unsigned int len,
+				 const char *kw, unsigned int *size)
+{
+	int ro_start, infokw_start;
+	unsigned int ro_len, infokw_size;
+
+	ro_start = pci_vpd_find_tag(buf, len, PCI_VPD_LRDT_RO_DATA, &ro_len);
+	if (ro_start < 0)
+		return ro_start;
+
+	infokw_start = pci_vpd_find_info_keyword(buf, ro_start, ro_len, kw);
+	if (infokw_start < 0)
+		return infokw_start;
+
+	infokw_size = pci_vpd_info_field_size(buf + infokw_start);
+	infokw_start += PCI_VPD_INFO_FLD_HDR_SIZE;
+
+	if (infokw_start + infokw_size > len)
+		return -EINVAL;
+
+	if (size)
+		*size = infokw_size;
+
+	return infokw_start;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_find_ro_info_keyword);
+
+int pci_vpd_check_csum(const void *buf, unsigned int len)
+{
+	const u8 *vpd = buf;
+	unsigned int size;
+	u8 csum = 0;
+	int rv_start;
+
+	rv_start = pci_vpd_find_ro_info_keyword(buf, len, PCI_VPD_RO_KEYWORD_CHKSUM, &size);
+	if (rv_start == -ENOENT) /* no checksum in VPD */
+		return 1;
+	else if (rv_start < 0)
+		return rv_start;
+
+	if (!size)
+		return -EINVAL;
+
+	while (rv_start >= 0)
+		csum += vpd[rv_start--];
+
+	return csum ? -EILSEQ : 0;
+}
+EXPORT_SYMBOL_GPL(pci_vpd_check_csum);
 
 #ifdef CONFIG_PCI_QUIRKS
 /*
@@ -450,7 +482,7 @@ static void quirk_f0_vpd_link(struct pci_dev *dev)
 	if (!f0)
 		return;
 
-	if (f0->vpd && dev->class == f0->class &&
+	if (f0->vpd.cap && dev->class == f0->class &&
 	    dev->vendor == f0->vendor && dev->device == f0->device)
 		dev->dev_flags |= PCI_DEV_FLAGS_VPD_REF_F0;
 
@@ -468,41 +500,27 @@ DECLARE_PCI_FIXUP_CLASS_EARLY(PCI_VENDOR_ID_INTEL, PCI_ANY_ID,
  */
 static void quirk_blacklist_vpd(struct pci_dev *dev)
 {
-	if (dev->vpd) {
-		dev->vpd->len = 0;
-		pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
-	}
+	dev->vpd.len = PCI_VPD_SZ_INVALID;
+	pci_warn(dev, FW_BUG "disabling VPD access (can't determine size of non-standard VPD format)\n");
 }
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID,
-		quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0060, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x007c, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0413, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0078, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0079, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0073, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x0071, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005b, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x002f, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005d, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_LSI_LOGIC, 0x005f, quirk_blacklist_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ATTANSIC, PCI_ANY_ID, quirk_blacklist_vpd);
 /*
  * The Amazon Annapurna Labs 0x0031 device id is reused for other non Root Port
  * device types, so the quirk is registered for the PCI_CLASS_BRIDGE_PCI class.
  */
-DECLARE_PCI_FIXUP_CLASS_FINAL(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
-			      PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
-
-static void pci_vpd_set_size(struct pci_dev *dev, size_t len)
-{
-	struct pci_vpd *vpd = dev->vpd;
-
-	if (!vpd || len == 0 || len > PCI_VPD_MAX_SIZE)
-		return;
-
-	vpd->valid = 1;
-	vpd->len = len;
-}
+DECLARE_PCI_FIXUP_CLASS_HEADER(PCI_VENDOR_ID_AMAZON_ANNAPURNA_LABS, 0x0031,
+			       PCI_CLASS_BRIDGE_PCI, 8, quirk_blacklist_vpd);
 
 static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
 {
@@ -522,12 +540,12 @@ static void quirk_chelsio_extend_vpd(struct pci_dev *dev)
 	 * limits.
 	 */
 	if (chip == 0x0 && prod >= 0x20)
-		pci_vpd_set_size(dev, 8192);
+		dev->vpd.len = 8192;
 	else if (chip >= 0x4 && func < 0x8)
-		pci_vpd_set_size(dev, 2048);
+		dev->vpd.len = 2048;
 }
 
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
-			quirk_chelsio_extend_vpd);
+DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CHELSIO, PCI_ANY_ID,
+			 quirk_chelsio_extend_vpd);
 
 #endif
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 3e491dfb2525..937a14fa7448 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -15,6 +15,7 @@
 #include <linux/of_platform.h>
 #include <linux/phy/phy.h>
 #include <linux/reset.h>
+#include <linux/units.h>
 
 #define STM32_USBPHYC_PLL	0x0
 #define STM32_USBPHYC_MISC	0x8
@@ -47,7 +48,6 @@
 #define PLL_FVCO_MHZ		2880
 #define PLL_INFF_MIN_RATE_HZ	19200000
 #define PLL_INFF_MAX_RATE_HZ	38400000
-#define HZ_PER_MHZ		1000000L
 
 struct pll_params {
 	u8 ndiv;
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index 41baccba033f..f901d2e43166 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -20,7 +20,7 @@ obj-$(CONFIG_CROS_EC_CHARDEV)		+= cros_ec_chardev.o
 obj-$(CONFIG_CROS_EC_LIGHTBAR)		+= cros_ec_lightbar.o
 obj-$(CONFIG_CROS_EC_VBC)		+= cros_ec_vbc.o
 obj-$(CONFIG_CROS_EC_DEBUGFS)		+= cros_ec_debugfs.o
-cros-ec-sensorhub-objs			:= cros_ec_sensorhub.o cros_ec_sensorhub_ring.o
+cros-ec-sensorhub-objs			:= cros_ec_sensorhub.o cros_ec_sensorhub_ring.o cros_ec_trace.o
 obj-$(CONFIG_CROS_EC_SENSORHUB)		+= cros-ec-sensorhub.o
 obj-$(CONFIG_CROS_EC_SYSFS)		+= cros_ec_sysfs.o
 obj-$(CONFIG_CROS_USBPD_LOGGER)		+= cros_usbpd_logger.o
diff --git a/drivers/platform/chrome/cros_ec_proto.c b/drivers/platform/chrome/cros_ec_proto.c
index aa7f7aa77297..a7404d69b2d3 100644
--- a/drivers/platform/chrome/cros_ec_proto.c
+++ b/drivers/platform/chrome/cros_ec_proto.c
@@ -279,6 +279,15 @@ static int cros_ec_host_command_proto_query(struct cros_ec_device *ec_dev,
 	msg->insize = sizeof(struct ec_response_get_protocol_info);
 
 	ret = send_command(ec_dev, msg);
+	/*
+	 * Send command once again when timeout occurred.
+	 * Fingerprint MCU (FPMCU) is restarted during system boot which
+	 * introduces small window in which FPMCU won't respond for any
+	 * messages sent by kernel. There is no need to wait before next
+	 * attempt because we waited at least EC_MSG_DEADLINE_MS.
+	 */
+	if (ret == -ETIMEDOUT)
+		ret = send_command(ec_dev, msg);
 
 	if (ret < 0) {
 		dev_dbg(ec_dev->dev,
diff --git a/drivers/platform/chrome/cros_ec_sensorhub_ring.c b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
index 8921f24e83ba..98e37080f760 100644
--- a/drivers/platform/chrome/cros_ec_sensorhub_ring.c
+++ b/drivers/platform/chrome/cros_ec_sensorhub_ring.c
@@ -17,6 +17,8 @@
 #include <linux/sort.h>
 #include <linux/slab.h>
 
+#include "cros_ec_trace.h"
+
 /* Precision of fixed point for the m values from the filter */
 #define M_PRECISION BIT(23)
 
@@ -291,6 +293,7 @@ cros_ec_sensor_ring_ts_filter_update(struct cros_ec_sensors_ts_filter_state
 		state->median_m = 0;
 		state->median_error = 0;
 	}
+	trace_cros_ec_sensorhub_filter(state, dx, dy);
 }
 
 /**
@@ -427,6 +430,11 @@ cros_ec_sensor_ring_process_event(struct cros_ec_sensorhub *sensorhub,
 			if (new_timestamp - *current_timestamp > 0)
 				*current_timestamp = new_timestamp;
 		}
+		trace_cros_ec_sensorhub_timestamp(in->timestamp,
+						  fifo_info->timestamp,
+						  fifo_timestamp,
+						  *current_timestamp,
+						  now);
 	}
 
 	if (in->flags & MOTIONSENSE_SENSOR_FLAG_ODR) {
@@ -460,6 +468,12 @@ cros_ec_sensor_ring_process_event(struct cros_ec_sensorhub *sensorhub,
 
 	/* Regular sample */
 	out->sensor_id = in->sensor_num;
+	trace_cros_ec_sensorhub_data(in->sensor_num,
+				     fifo_info->timestamp,
+				     fifo_timestamp,
+				     *current_timestamp,
+				     now);
+
 	if (*current_timestamp - now > 0) {
 		/*
 		 * This fix is needed to overcome the timestamp filter putting
diff --git a/drivers/platform/chrome/cros_ec_trace.h b/drivers/platform/chrome/cros_ec_trace.h
index f744b21bc655..7e7cfc98657a 100644
--- a/drivers/platform/chrome/cros_ec_trace.h
+++ b/drivers/platform/chrome/cros_ec_trace.h
@@ -15,6 +15,7 @@
 #include <linux/types.h>
 #include <linux/platform_data/cros_ec_commands.h>
 #include <linux/platform_data/cros_ec_proto.h>
+#include <linux/platform_data/cros_ec_sensorhub.h>
 
 #include <linux/tracepoint.h>
 
@@ -70,6 +71,99 @@ TRACE_EVENT(cros_ec_request_done,
 		  __entry->retval)
 );
 
+TRACE_EVENT(cros_ec_sensorhub_timestamp,
+	    TP_PROTO(u32 ec_sample_timestamp, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+		     s64 current_timestamp, s64 current_time),
+	TP_ARGS(ec_sample_timestamp, ec_fifo_timestamp, fifo_timestamp, current_timestamp,
+		current_time),
+	TP_STRUCT__entry(
+		__field(u32, ec_sample_timestamp)
+		__field(u32, ec_fifo_timestamp)
+		__field(s64, fifo_timestamp)
+		__field(s64, current_timestamp)
+		__field(s64, current_time)
+		__field(s64, delta)
+	),
+	TP_fast_assign(
+		__entry->ec_sample_timestamp = ec_sample_timestamp;
+		__entry->ec_fifo_timestamp = ec_fifo_timestamp;
+		__entry->fifo_timestamp = fifo_timestamp;
+		__entry->current_timestamp = current_timestamp;
+		__entry->current_time = current_time;
+		__entry->delta = current_timestamp - current_time;
+	),
+	TP_printk("ec_ts: %9u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+		  __entry->ec_sample_timestamp,
+		__entry->ec_fifo_timestamp,
+		__entry->fifo_timestamp,
+		__entry->current_timestamp,
+		__entry->current_time,
+		__entry->delta
+	)
+);
+
+TRACE_EVENT(cros_ec_sensorhub_data,
+	    TP_PROTO(u32 ec_sensor_num, u32 ec_fifo_timestamp, s64 fifo_timestamp,
+		     s64 current_timestamp, s64 current_time),
+	TP_ARGS(ec_sensor_num, ec_fifo_timestamp, fifo_timestamp, current_timestamp, current_time),
+	TP_STRUCT__entry(
+		__field(u32, ec_sensor_num)
+		__field(u32, ec_fifo_timestamp)
+		__field(s64, fifo_timestamp)
+		__field(s64, current_timestamp)
+		__field(s64, current_time)
+		__field(s64, delta)
+	),
+	TP_fast_assign(
+		__entry->ec_sensor_num = ec_sensor_num;
+		__entry->ec_fifo_timestamp = ec_fifo_timestamp;
+		__entry->fifo_timestamp = fifo_timestamp;
+		__entry->current_timestamp = current_timestamp;
+		__entry->current_time = current_time;
+		__entry->delta = current_timestamp - current_time;
+	),
+	TP_printk("ec_num: %4u, ec_fifo_ts: %9u, fifo_ts: %12lld, curr_ts: %12lld, curr_time: %12lld, delta %12lld",
+		  __entry->ec_sensor_num,
+		__entry->ec_fifo_timestamp,
+		__entry->fifo_timestamp,
+		__entry->current_timestamp,
+		__entry->current_time,
+		__entry->delta
+	)
+);
+
+TRACE_EVENT(cros_ec_sensorhub_filter,
+	    TP_PROTO(struct cros_ec_sensors_ts_filter_state *state, s64 dx, s64 dy),
+	TP_ARGS(state, dx, dy),
+	TP_STRUCT__entry(
+		__field(s64, dx)
+		__field(s64, dy)
+		__field(s64, median_m)
+		__field(s64, median_error)
+		__field(s64, history_len)
+		__field(s64, x)
+		__field(s64, y)
+	),
+	TP_fast_assign(
+		__entry->dx = dx;
+		__entry->dy = dy;
+		__entry->median_m = state->median_m;
+		__entry->median_error = state->median_error;
+		__entry->history_len = state->history_len;
+		__entry->x = state->x_offset;
+		__entry->y = state->y_offset;
+	),
+	TP_printk("dx: %12lld. dy: %12lld median_m: %12lld median_error: %12lld len: %lld x: %12lld y: %12lld",
+		  __entry->dx,
+		__entry->dy,
+		__entry->median_m,
+		__entry->median_error,
+		__entry->history_len,
+		__entry->x,
+		__entry->y
+	)
+);
+
 
 #endif /* _CROS_EC_TRACE_H_ */
 
diff --git a/drivers/platform/chrome/cros_ec_typec.c b/drivers/platform/chrome/cros_ec_typec.c
index 27c068c4c38d..262a891eded3 100644
--- a/drivers/platform/chrome/cros_ec_typec.c
+++ b/drivers/platform/chrome/cros_ec_typec.c
@@ -1054,24 +1054,6 @@ static int cros_typec_get_cmd_version(struct cros_typec_data *typec)
 	return 0;
 }
 
-/* Check the EC feature flags to see if TYPEC_* features are supported. */
-static int cros_typec_feature_supported(struct cros_typec_data *typec, enum ec_feature_code feature)
-{
-	struct ec_response_get_features resp = {};
-	int ret;
-
-	ret = cros_typec_ec_command(typec, 0, EC_CMD_GET_FEATURES, NULL, 0,
-				    &resp, sizeof(resp));
-	if (ret < 0) {
-		dev_warn(typec->dev,
-			 "Failed to get features, assuming typec feature=%d unsupported.\n",
-			 feature);
-		return 0;
-	}
-
-	return resp.flags[feature / 32] & EC_FEATURE_MASK_1(feature);
-}
-
 static void cros_typec_port_work(struct work_struct *work)
 {
 	struct cros_typec_data *typec = container_of(work, struct cros_typec_data, port_work);
@@ -1113,6 +1095,7 @@ MODULE_DEVICE_TABLE(of, cros_typec_of_match);
 
 static int cros_typec_probe(struct platform_device *pdev)
 {
+	struct cros_ec_dev *ec_dev = NULL;
 	struct device *dev = &pdev->dev;
 	struct cros_typec_data *typec;
 	struct ec_response_usb_pd_ports resp;
@@ -1132,10 +1115,10 @@ static int cros_typec_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	typec->typec_cmd_supported = !!cros_typec_feature_supported(typec,
-					EC_FEATURE_TYPEC_CMD);
-	typec->needs_mux_ack = !!cros_typec_feature_supported(typec,
-					EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK);
+	ec_dev = dev_get_drvdata(&typec->ec->ec->dev);
+	typec->typec_cmd_supported = !!cros_ec_check_features(ec_dev, EC_FEATURE_TYPEC_CMD);
+	typec->needs_mux_ack = !!cros_ec_check_features(ec_dev,
+							EC_FEATURE_TYPEC_MUX_REQUIRE_AP_ACK);
 
 	ret = cros_typec_ec_command(typec, 0, EC_CMD_USB_PD_PORTS, NULL, 0,
 				    &resp, sizeof(resp));
diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
index c76adedd58c9..aa29841bbb79 100644
--- a/drivers/pwm/Kconfig
+++ b/drivers/pwm/Kconfig
@@ -272,7 +272,7 @@ config PWM_IQS620A
 
 config PWM_JZ4740
 	tristate "Ingenic JZ47xx PWM support"
-	depends on MIPS
+	depends on MIPS || COMPILE_TEST
 	depends on COMMON_CLK
 	select MFD_SYSCON
 	help
@@ -284,7 +284,8 @@ config PWM_JZ4740
 
 config PWM_KEEMBAY
 	tristate "Intel Keem Bay PWM driver"
-	depends on ARCH_KEEMBAY || (ARM64 && COMPILE_TEST)
+	depends on ARCH_KEEMBAY || COMPILE_TEST
+	depends on COMMON_CLK && HAS_IOMEM
 	help
 	  The platform driver for Intel Keem Bay PWM controller.
 
diff --git a/drivers/pwm/core.c b/drivers/pwm/core.c
index 35e894f4a379..4527f09a5c50 100644
--- a/drivers/pwm/core.c
+++ b/drivers/pwm/core.c
@@ -304,7 +304,7 @@ EXPORT_SYMBOL_GPL(pwmchip_add);
  *
  * Returns: 0 on success or a negative error code on failure.
  */
-int pwmchip_remove(struct pwm_chip *chip)
+void pwmchip_remove(struct pwm_chip *chip)
 {
 	pwmchip_sysfs_unexport(chip);
 
@@ -318,8 +318,6 @@ int pwmchip_remove(struct pwm_chip *chip)
 	free_pwms(chip);
 
 	mutex_unlock(&pwm_lock);
-
-	return 0;
 }
 EXPORT_SYMBOL_GPL(pwmchip_remove);
 
diff --git a/drivers/pwm/pwm-ab8500.c b/drivers/pwm/pwm-ab8500.c
index e2a26d9da25b..ad37bc46f272 100644
--- a/drivers/pwm/pwm-ab8500.c
+++ b/drivers/pwm/pwm-ab8500.c
@@ -22,14 +22,21 @@
 
 struct ab8500_pwm_chip {
 	struct pwm_chip chip;
+	unsigned int hwid;
 };
 
+static struct ab8500_pwm_chip *ab8500_pwm_from_chip(struct pwm_chip *chip)
+{
+	return container_of(chip, struct ab8500_pwm_chip, chip);
+}
+
 static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			    const struct pwm_state *state)
 {
 	int ret;
 	u8 reg;
 	unsigned int higher_val, lower_val;
+	struct ab8500_pwm_chip *ab8500 = ab8500_pwm_from_chip(chip);
 
 	if (state->polarity != PWM_POLARITY_NORMAL)
 		return -EINVAL;
@@ -37,7 +44,7 @@ static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	if (!state->enabled) {
 		ret = abx500_mask_and_set_register_interruptible(chip->dev,
 					AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-					1 << (chip->base - 1), 0);
+					1 << ab8500->hwid, 0);
 
 		if (ret < 0)
 			dev_err(chip->dev, "%s: Failed to disable PWM, Error %d\n",
@@ -56,7 +63,7 @@ static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 	 */
 	higher_val = ((state->duty_cycle & 0x0300) >> 8);
 
-	reg = AB8500_PWM_OUT_CTRL1_REG + ((chip->base - 1) * 2);
+	reg = AB8500_PWM_OUT_CTRL1_REG + (ab8500->hwid * 2);
 
 	ret = abx500_set_register_interruptible(chip->dev, AB8500_MISC,
 			reg, (u8)lower_val);
@@ -70,7 +77,7 @@ static int ab8500_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	ret = abx500_mask_and_set_register_interruptible(chip->dev,
 				AB8500_MISC, AB8500_PWM_OUT_CTRL7_REG,
-				1 << (chip->base - 1), 1 << (chip->base - 1));
+				1 << ab8500->hwid, 1 << ab8500->hwid);
 	if (ret < 0)
 		dev_err(chip->dev, "%s: Failed to enable PWM, Error %d\n",
 							pwm->label, ret);
@@ -88,6 +95,9 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	struct ab8500_pwm_chip *ab8500;
 	int err;
 
+	if (pdev->id < 1 || pdev->id > 31)
+		return dev_err_probe(&pdev->dev, EINVAL, "Invalid device id %d\n", pdev->id);
+
 	/*
 	 * Nothing to be done in probe, this is required to get the
 	 * device which is required for ab8500 read and write
@@ -99,27 +109,13 @@ static int ab8500_pwm_probe(struct platform_device *pdev)
 	ab8500->chip.dev = &pdev->dev;
 	ab8500->chip.ops = &ab8500_pwm_ops;
 	ab8500->chip.npwm = 1;
+	ab8500->hwid = pdev->id - 1;
 
-	err = pwmchip_add(&ab8500->chip);
+	err = devm_pwmchip_add(&pdev->dev, &ab8500->chip);
 	if (err < 0)
 		return dev_err_probe(&pdev->dev, err, "Failed to add pwm chip\n");
 
 	dev_dbg(&pdev->dev, "pwm probe successful\n");
-	platform_set_drvdata(pdev, ab8500);
-
-	return 0;
-}
-
-static int ab8500_pwm_remove(struct platform_device *pdev)
-{
-	struct ab8500_pwm_chip *ab8500 = platform_get_drvdata(pdev);
-	int err;
-
-	err = pwmchip_remove(&ab8500->chip);
-	if (err < 0)
-		return err;
-
-	dev_dbg(&pdev->dev, "pwm driver removed\n");
 
 	return 0;
 }
@@ -129,7 +125,6 @@ static struct platform_driver ab8500_pwm_driver = {
 		.name = "ab8500-pwm",
 	},
 	.probe = ab8500_pwm_probe,
-	.remove = ab8500_pwm_remove,
 };
 module_platform_driver(ab8500_pwm_driver);
 
diff --git a/drivers/pwm/pwm-atmel-hlcdc.c b/drivers/pwm/pwm-atmel-hlcdc.c
index 4459325d3650..a43b2babc809 100644
--- a/drivers/pwm/pwm-atmel-hlcdc.c
+++ b/drivers/pwm/pwm-atmel-hlcdc.c
@@ -281,11 +281,8 @@ static int atmel_hlcdc_pwm_probe(struct platform_device *pdev)
 static int atmel_hlcdc_pwm_remove(struct platform_device *pdev)
 {
 	struct atmel_hlcdc_pwm *chip = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&chip->chip);
-	if (ret)
-		return ret;
+	pwmchip_remove(&chip->chip);
 
 	clk_disable_unprepare(chip->hlcdc->periph_clk);
 
diff --git a/drivers/pwm/pwm-atmel-tcb.c b/drivers/pwm/pwm-atmel-tcb.c
index bf398f21484d..36f7ea381838 100644
--- a/drivers/pwm/pwm-atmel-tcb.c
+++ b/drivers/pwm/pwm-atmel-tcb.c
@@ -503,11 +503,8 @@ err_slow_clk:
 static int atmel_tcb_pwm_remove(struct platform_device *pdev)
 {
 	struct atmel_tcb_pwm_chip *tcbpwm = platform_get_drvdata(pdev);
-	int err;
 
-	err = pwmchip_remove(&tcbpwm->chip);
-	if (err < 0)
-		return err;
+	pwmchip_remove(&tcbpwm->chip);
 
 	clk_disable_unprepare(tcbpwm->slow_clk);
 	clk_put(tcbpwm->slow_clk);
diff --git a/drivers/pwm/pwm-atmel.c b/drivers/pwm/pwm-atmel.c
index a8162bae3e8a..e748604403cc 100644
--- a/drivers/pwm/pwm-atmel.c
+++ b/drivers/pwm/pwm-atmel.c
@@ -84,9 +84,19 @@ struct atmel_pwm_chip {
 	void __iomem *base;
 	const struct atmel_pwm_data *data;
 
-	unsigned int updated_pwms;
-	/* ISR is cleared when read, ensure only one thread does that */
-	struct mutex isr_lock;
+	/*
+	 * The hardware supports a mechanism to update a channel's duty cycle at
+	 * the end of the currently running period. When such an update is
+	 * pending we delay disabling the PWM until the new configuration is
+	 * active because otherwise pmw_config(duty_cycle=0); pwm_disable();
+	 * might not result in an inactive output.
+	 * This bitmask tracks for which channels an update is pending in
+	 * hardware.
+	 */
+	u32 update_pending;
+
+	/* Protects .update_pending */
+	spinlock_t lock;
 };
 
 static inline struct atmel_pwm_chip *to_atmel_pwm_chip(struct pwm_chip *chip)
@@ -123,6 +133,64 @@ static inline void atmel_pwm_ch_writel(struct atmel_pwm_chip *chip,
 	atmel_pwm_writel(chip, base + offset, val);
 }
 
+static void atmel_pwm_update_pending(struct atmel_pwm_chip *chip)
+{
+	/*
+	 * Each channel that has its bit in ISR set started a new period since
+	 * ISR was cleared and so there is no more update pending.  Note that
+	 * reading ISR clears it, so this needs to handle all channels to not
+	 * loose information.
+	 */
+	u32 isr = atmel_pwm_readl(chip, PWM_ISR);
+
+	chip->update_pending &= ~isr;
+}
+
+static void atmel_pwm_set_pending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	spin_lock(&chip->lock);
+
+	/*
+	 * Clear pending flags in hardware because otherwise there might still
+	 * be a stale flag in ISR.
+	 */
+	atmel_pwm_update_pending(chip);
+
+	chip->update_pending |= (1 << ch);
+
+	spin_unlock(&chip->lock);
+}
+
+static int atmel_pwm_test_pending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	int ret = 0;
+
+	spin_lock(&chip->lock);
+
+	if (chip->update_pending & (1 << ch)) {
+		atmel_pwm_update_pending(chip);
+
+		if (chip->update_pending & (1 << ch))
+			ret = 1;
+	}
+
+	spin_unlock(&chip->lock);
+
+	return ret;
+}
+
+static int atmel_pwm_wait_nonpending(struct atmel_pwm_chip *chip, unsigned int ch)
+{
+	unsigned long timeout = jiffies + 2 * HZ;
+	int ret;
+
+	while ((ret = atmel_pwm_test_pending(chip, ch)) &&
+	       time_before(jiffies, timeout))
+		usleep_range(10, 100);
+
+	return ret ? -ETIMEDOUT : 0;
+}
+
 static int atmel_pwm_calculate_cprd_and_pres(struct pwm_chip *chip,
 					     unsigned long clkrate,
 					     const struct pwm_state *state,
@@ -185,6 +253,7 @@ static void atmel_pwm_update_cdty(struct pwm_chip *chip, struct pwm_device *pwm,
 
 	atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm,
 			    atmel_pwm->data->regs.duty_upd, cdty);
+	atmel_pwm_set_pending(atmel_pwm, pwm->hwpwm);
 }
 
 static void atmel_pwm_set_cprd_cdty(struct pwm_chip *chip,
@@ -205,20 +274,8 @@ static void atmel_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm,
 	struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
 	unsigned long timeout = jiffies + 2 * HZ;
 
-	/*
-	 * Wait for at least a complete period to have passed before disabling a
-	 * channel to be sure that CDTY has been updated
-	 */
-	mutex_lock(&atmel_pwm->isr_lock);
-	atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
-
-	while (!(atmel_pwm->updated_pwms & (1 << pwm->hwpwm)) &&
-	       time_before(jiffies, timeout)) {
-		usleep_range(10, 100);
-		atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
-	}
+	atmel_pwm_wait_nonpending(atmel_pwm, pwm->hwpwm);
 
-	mutex_unlock(&atmel_pwm->isr_lock);
 	atmel_pwm_writel(atmel_pwm, PWM_DIS, 1 << pwm->hwpwm);
 
 	/*
@@ -292,10 +349,6 @@ static int atmel_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
 			val |= PWM_CMR_CPOL;
 		atmel_pwm_ch_writel(atmel_pwm, pwm->hwpwm, PWM_CMR, val);
 		atmel_pwm_set_cprd_cdty(chip, pwm, cprd, cdty);
-		mutex_lock(&atmel_pwm->isr_lock);
-		atmel_pwm->updated_pwms |= atmel_pwm_readl(atmel_pwm, PWM_ISR);
-		atmel_pwm->updated_pwms &= ~(1 << pwm->hwpwm);
-		mutex_unlock(&atmel_pwm->isr_lock);
 		atmel_pwm_writel(atmel_pwm, PWM_ENA, 1 << pwm->hwpwm);
 	} else if (cstate.enabled) {
 		atmel_pwm_disable(chip, pwm, true);
@@ -326,6 +379,9 @@ static void atmel_pwm_get_state(struct pwm_chip *chip, struct pwm_device *pwm,
 		tmp <<= pres;
 		state->period = DIV64_U64_ROUND_UP(tmp, rate);
 
+		/* Wait for an updated duty_cycle queued in hardware */
+		atmel_pwm_wait_nonpending(atmel_pwm, pwm->hwpwm);
+
 		cdty = atmel_pwm_ch_readl(atmel_pwm, pwm->hwpwm,
 					  atmel_pwm->data->regs.duty);
 		tmp = (u64)(cprd - cdty) * NSEC_PER_SEC;
@@ -416,9 +472,10 @@ static int atmel_pwm_probe(struct platform_device *pdev)
 	if (!atmel_pwm)
 		return -ENOMEM;
 
-	mutex_init(&atmel_pwm->isr_lock);
 	atmel_pwm->data = of_device_get_match_data(&pdev->dev);
-	atmel_pwm->updated_pwms = 0;
+
+	atmel_pwm->update_pending = 0;
+	spin_lock_init(&atmel_pwm->lock);
 
 	atmel_pwm->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(atmel_pwm->base))
@@ -460,7 +517,6 @@ static int atmel_pwm_remove(struct platform_device *pdev)
 	pwmchip_remove(&atmel_pwm->chip);
 
 	clk_unprepare(atmel_pwm->clk);
-	mutex_destroy(&atmel_pwm->isr_lock);
 
 	return 0;
 }
diff --git a/drivers/pwm/pwm-bcm-kona.c b/drivers/pwm/pwm-bcm-kona.c
index 8c85c66ea5c9..64148f5f81d0 100644
--- a/drivers/pwm/pwm-bcm-kona.c
+++ b/drivers/pwm/pwm-bcm-kona.c
@@ -267,8 +267,6 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 	if (kp == NULL)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, kp);
-
 	kp->chip.dev = &pdev->dev;
 	kp->chip.ops = &kona_pwm_ops;
 	kp->chip.npwm = 6;
@@ -298,20 +296,13 @@ static int kona_pwmc_probe(struct platform_device *pdev)
 
 	clk_disable_unprepare(kp->clk);
 
-	ret = pwmchip_add(&kp->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &kp->chip);
 	if (ret < 0)
 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
 
 	return ret;
 }
 
-static int kona_pwmc_remove(struct platform_device *pdev)
-{
-	struct kona_pwmc *kp = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&kp->chip);
-}
-
 static const struct of_device_id bcm_kona_pwmc_dt[] = {
 	{ .compatible = "brcm,kona-pwm" },
 	{ },
@@ -324,7 +315,6 @@ static struct platform_driver kona_pwmc_driver = {
 		.of_match_table = bcm_kona_pwmc_dt,
 	},
 	.probe = kona_pwmc_probe,
-	.remove = kona_pwmc_remove,
 };
 module_platform_driver(kona_pwmc_driver);
 
diff --git a/drivers/pwm/pwm-brcmstb.c b/drivers/pwm/pwm-brcmstb.c
index 8b1d1e7aa856..3b529f82b97c 100644
--- a/drivers/pwm/pwm-brcmstb.c
+++ b/drivers/pwm/pwm-brcmstb.c
@@ -282,12 +282,11 @@ out_clk:
 static int brcmstb_pwm_remove(struct platform_device *pdev)
 {
 	struct brcmstb_pwm *p = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&p->chip);
+	pwmchip_remove(&p->chip);
 	clk_disable_unprepare(p->clk);
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/pwm/pwm-cros-ec.c b/drivers/pwm/pwm-cros-ec.c
index 9fffb566af5f..5e29d9c682c3 100644
--- a/drivers/pwm/pwm-cros-ec.c
+++ b/drivers/pwm/pwm-cros-ec.c
@@ -280,7 +280,9 @@ static int cros_ec_pwm_remove(struct platform_device *dev)
 	struct cros_ec_pwm_device *ec_pwm = platform_get_drvdata(dev);
 	struct pwm_chip *chip = &ec_pwm->chip;
 
-	return pwmchip_remove(chip);
+	pwmchip_remove(chip);
+
+	return 0;
 }
 
 #ifdef CONFIG_OF
diff --git a/drivers/pwm/pwm-ep93xx.c b/drivers/pwm/pwm-ep93xx.c
index fc3cb7d669c6..c45a75e65c86 100644
--- a/drivers/pwm/pwm-ep93xx.c
+++ b/drivers/pwm/pwm-ep93xx.c
@@ -183,27 +183,18 @@ static int ep93xx_pwm_probe(struct platform_device *pdev)
 	ep93xx_pwm->chip.ops = &ep93xx_pwm_ops;
 	ep93xx_pwm->chip.npwm = 1;
 
-	ret = pwmchip_add(&ep93xx_pwm->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &ep93xx_pwm->chip);
 	if (ret < 0)
 		return ret;
 
-	platform_set_drvdata(pdev, ep93xx_pwm);
 	return 0;
 }
 
-static int ep93xx_pwm_remove(struct platform_device *pdev)
-{
-	struct ep93xx_pwm *ep93xx_pwm = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&ep93xx_pwm->chip);
-}
-
 static struct platform_driver ep93xx_pwm_driver = {
 	.driver = {
 		.name = "ep93xx-pwm",
 	},
 	.probe = ep93xx_pwm_probe,
-	.remove = ep93xx_pwm_remove,
 };
 module_platform_driver(ep93xx_pwm_driver);
 
diff --git a/drivers/pwm/pwm-fsl-ftm.c b/drivers/pwm/pwm-fsl-ftm.c
index 96ccd772280c..0247757f9a72 100644
--- a/drivers/pwm/pwm-fsl-ftm.c
+++ b/drivers/pwm/pwm-fsl-ftm.c
@@ -453,7 +453,7 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	fpc->chip.ops = &fsl_pwm_ops;
 	fpc->chip.npwm = 8;
 
-	ret = pwmchip_add(&fpc->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &fpc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add PWM chip: %d\n", ret);
 		return ret;
@@ -464,13 +464,6 @@ static int fsl_pwm_probe(struct platform_device *pdev)
 	return fsl_pwm_init(fpc);
 }
 
-static int fsl_pwm_remove(struct platform_device *pdev)
-{
-	struct fsl_pwm_chip *fpc = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&fpc->chip);
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int fsl_pwm_suspend(struct device *dev)
 {
@@ -552,7 +545,6 @@ static struct platform_driver fsl_pwm_driver = {
 		.pm = &fsl_pwm_pm_ops,
 	},
 	.probe = fsl_pwm_probe,
-	.remove = fsl_pwm_remove,
 };
 module_platform_driver(fsl_pwm_driver);
 
diff --git a/drivers/pwm/pwm-hibvt.c b/drivers/pwm/pwm-hibvt.c
index 4a6e9ad3c0ff..333f1b18ff4e 100644
--- a/drivers/pwm/pwm-hibvt.c
+++ b/drivers/pwm/pwm-hibvt.c
@@ -248,13 +248,15 @@ static int hibvt_pwm_remove(struct platform_device *pdev)
 
 	pwm_chip = platform_get_drvdata(pdev);
 
+	pwmchip_remove(&pwm_chip->chip);
+
 	reset_control_assert(pwm_chip->rstc);
 	msleep(30);
 	reset_control_deassert(pwm_chip->rstc);
 
 	clk_disable_unprepare(pwm_chip->clk);
 
-	return pwmchip_remove(&pwm_chip->chip);
+	return 0;
 }
 
 static const struct of_device_id hibvt_pwm_of_match[] = {
diff --git a/drivers/pwm/pwm-img.c b/drivers/pwm/pwm-img.c
index 11b16ecc4f96..f97f82548293 100644
--- a/drivers/pwm/pwm-img.c
+++ b/drivers/pwm/pwm-img.c
@@ -326,28 +326,14 @@ err_pm_disable:
 static int img_pwm_remove(struct platform_device *pdev)
 {
 	struct img_pwm_chip *pwm_chip = platform_get_drvdata(pdev);
-	u32 val;
-	unsigned int i;
-	int ret;
-
-	ret = pm_runtime_get_sync(&pdev->dev);
-	if (ret < 0) {
-		pm_runtime_put(&pdev->dev);
-		return ret;
-	}
-
-	for (i = 0; i < pwm_chip->chip.npwm; i++) {
-		val = img_pwm_readl(pwm_chip, PWM_CTRL_CFG);
-		val &= ~BIT(i);
-		img_pwm_writel(pwm_chip, PWM_CTRL_CFG, val);
-	}
 
-	pm_runtime_put(&pdev->dev);
 	pm_runtime_disable(&pdev->dev);
 	if (!pm_runtime_status_suspended(&pdev->dev))
 		img_pwm_runtime_suspend(&pdev->dev);
 
-	return pwmchip_remove(&pwm_chip->chip);
+	pwmchip_remove(&pwm_chip->chip);
+
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/pwm/pwm-imx-tpm.c b/drivers/pwm/pwm-imx-tpm.c
index dbb50493abdd..e5e7b7c339a8 100644
--- a/drivers/pwm/pwm-imx-tpm.c
+++ b/drivers/pwm/pwm-imx-tpm.c
@@ -382,11 +382,12 @@ static int pwm_imx_tpm_probe(struct platform_device *pdev)
 static int pwm_imx_tpm_remove(struct platform_device *pdev)
 {
 	struct imx_tpm_pwm_chip *tpm = platform_get_drvdata(pdev);
-	int ret = pwmchip_remove(&tpm->chip);
+
+	pwmchip_remove(&tpm->chip);
 
 	clk_disable_unprepare(tpm->clk);
 
-	return ret;
+	return 0;
 }
 
 static int __maybe_unused pwm_imx_tpm_suspend(struct device *dev)
diff --git a/drivers/pwm/pwm-imx27.c b/drivers/pwm/pwm-imx27.c
index f6588a96fbd9..ea91a2f81a9f 100644
--- a/drivers/pwm/pwm-imx27.c
+++ b/drivers/pwm/pwm-imx27.c
@@ -313,8 +313,6 @@ static int pwm_imx27_probe(struct platform_device *pdev)
 	if (imx == NULL)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, imx);
-
 	imx->clk_ipg = devm_clk_get(&pdev->dev, "ipg");
 	if (IS_ERR(imx->clk_ipg))
 		return dev_err_probe(&pdev->dev, PTR_ERR(imx->clk_ipg),
@@ -342,16 +340,7 @@ static int pwm_imx27_probe(struct platform_device *pdev)
 	if (!(pwmcr & MX3_PWMCR_EN))
 		pwm_imx27_clk_disable_unprepare(imx);
 
-	return pwmchip_add(&imx->chip);
-}
-
-static int pwm_imx27_remove(struct platform_device *pdev)
-{
-	struct pwm_imx27_chip *imx;
-
-	imx = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&imx->chip);
+	return devm_pwmchip_add(&pdev->dev, &imx->chip);
 }
 
 static struct platform_driver imx_pwm_driver = {
@@ -360,7 +349,6 @@ static struct platform_driver imx_pwm_driver = {
 		.of_match_table = pwm_imx27_dt_ids,
 	},
 	.probe = pwm_imx27_probe,
-	.remove = pwm_imx27_remove,
 };
 module_platform_driver(imx_pwm_driver);
 
diff --git a/drivers/pwm/pwm-intel-lgm.c b/drivers/pwm/pwm-intel-lgm.c
index 015f5eba09a1..b66c35074087 100644
--- a/drivers/pwm/pwm-intel-lgm.c
+++ b/drivers/pwm/pwm-intel-lgm.c
@@ -176,8 +176,6 @@ static int lgm_pwm_probe(struct platform_device *pdev)
 	if (!pc)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, pc);
-
 	io_base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(io_base))
 		return PTR_ERR(io_base);
@@ -210,20 +208,13 @@ static int lgm_pwm_probe(struct platform_device *pdev)
 
 	lgm_pwm_init(pc);
 
-	ret = pwmchip_add(&pc->chip);
+	ret = devm_pwmchip_add(dev, &pc->chip);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "failed to add PWM chip\n");
 
 	return 0;
 }
 
-static int lgm_pwm_remove(struct platform_device *pdev)
-{
-	struct lgm_pwm_chip *pc = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&pc->chip);
-}
-
 static const struct of_device_id lgm_pwm_of_match[] = {
 	{ .compatible = "intel,lgm-pwm" },
 	{ }
@@ -236,7 +227,6 @@ static struct platform_driver lgm_pwm_driver = {
 		.of_match_table = lgm_pwm_of_match,
 	},
 	.probe = lgm_pwm_probe,
-	.remove = lgm_pwm_remove,
 };
 module_platform_driver(lgm_pwm_driver);
 
diff --git a/drivers/pwm/pwm-iqs620a.c b/drivers/pwm/pwm-iqs620a.c
index 6c6e26d18329..54bd95a5cab0 100644
--- a/drivers/pwm/pwm-iqs620a.c
+++ b/drivers/pwm/pwm-iqs620a.c
@@ -189,7 +189,6 @@ static int iqs620_pwm_probe(struct platform_device *pdev)
 	if (!iqs620_pwm)
 		return -ENOMEM;
 
-	platform_set_drvdata(pdev, iqs620_pwm);
 	iqs620_pwm->iqs62x = iqs62x;
 
 	ret = regmap_read(iqs62x->regmap, IQS620_PWR_SETTINGS, &val);
@@ -224,31 +223,18 @@ static int iqs620_pwm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	ret = pwmchip_add(&iqs620_pwm->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &iqs620_pwm->chip);
 	if (ret)
 		dev_err(&pdev->dev, "Failed to add device: %d\n", ret);
 
 	return ret;
 }
 
-static int iqs620_pwm_remove(struct platform_device *pdev)
-{
-	struct iqs620_pwm_private *iqs620_pwm = platform_get_drvdata(pdev);
-	int ret;
-
-	ret = pwmchip_remove(&iqs620_pwm->chip);
-	if (ret)
-		dev_err(&pdev->dev, "Failed to remove device: %d\n", ret);
-
-	return ret;
-}
-
 static struct platform_driver iqs620_pwm_platform_driver = {
 	.driver = {
 		.name = "iqs620a-pwm",
 	},
 	.probe = iqs620_pwm_probe,
-	.remove = iqs620_pwm_remove,
 };
 module_platform_driver(iqs620_pwm_platform_driver);
 
diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c
index 990e7904c7f1..23dc1fb770e2 100644
--- a/drivers/pwm/pwm-jz4740.c
+++ b/drivers/pwm/pwm-jz4740.c
@@ -245,16 +245,7 @@ static int jz4740_pwm_probe(struct platform_device *pdev)
 	jz4740->chip.ops = &jz4740_pwm_ops;
 	jz4740->chip.npwm = info->num_pwms;
 
-	platform_set_drvdata(pdev, jz4740);
-
-	return pwmchip_add(&jz4740->chip);
-}
-
-static int jz4740_pwm_remove(struct platform_device *pdev)
-{
-	struct jz4740_pwm_chip *jz4740 = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&jz4740->chip);
+	return devm_pwmchip_add(dev, &jz4740->chip);
 }
 
 static const struct soc_info __maybe_unused jz4740_soc_info = {
@@ -280,7 +271,6 @@ static struct platform_driver jz4740_pwm_driver = {
 		.of_match_table = of_match_ptr(jz4740_pwm_dt_ids),
 	},
 	.probe = jz4740_pwm_probe,
-	.remove = jz4740_pwm_remove,
 };
 module_platform_driver(jz4740_pwm_driver);
 
diff --git a/drivers/pwm/pwm-keembay.c b/drivers/pwm/pwm-keembay.c
index 521a825c8ba0..733811b05721 100644
--- a/drivers/pwm/pwm-keembay.c
+++ b/drivers/pwm/pwm-keembay.c
@@ -207,22 +207,13 @@ static int keembay_pwm_probe(struct platform_device *pdev)
 	priv->chip.ops = &keembay_pwm_ops;
 	priv->chip.npwm = KMB_TOTAL_PWM_CHANNELS;
 
-	ret = pwmchip_add(&priv->chip);
+	ret = devm_pwmchip_add(dev, &priv->chip);
 	if (ret)
 		return dev_err_probe(dev, ret, "Failed to add PWM chip\n");
 
-	platform_set_drvdata(pdev, priv);
-
 	return 0;
 }
 
-static int keembay_pwm_remove(struct platform_device *pdev)
-{
-	struct keembay_pwm *priv = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&priv->chip);
-}
-
 static const struct of_device_id keembay_pwm_of_match[] = {
 	{ .compatible = "intel,keembay-pwm" },
 	{ }
@@ -231,7 +222,6 @@ MODULE_DEVICE_TABLE(of, keembay_pwm_of_match);
 
 static struct platform_driver keembay_pwm_driver = {
 	.probe	= keembay_pwm_probe,
-	.remove	= keembay_pwm_remove,
 	.driver	= {
 		.name = "pwm-keembay",
 		.of_match_table = keembay_pwm_of_match,
diff --git a/drivers/pwm/pwm-lp3943.c b/drivers/pwm/pwm-lp3943.c
index 7551253ada32..ea17d446a627 100644
--- a/drivers/pwm/pwm-lp3943.c
+++ b/drivers/pwm/pwm-lp3943.c
@@ -276,16 +276,7 @@ static int lp3943_pwm_probe(struct platform_device *pdev)
 	lp3943_pwm->chip.ops = &lp3943_pwm_ops;
 	lp3943_pwm->chip.npwm = LP3943_NUM_PWMS;
 
-	platform_set_drvdata(pdev, lp3943_pwm);
-
-	return pwmchip_add(&lp3943_pwm->chip);
-}
-
-static int lp3943_pwm_remove(struct platform_device *pdev)
-{
-	struct lp3943_pwm *lp3943_pwm = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&lp3943_pwm->chip);
+	return devm_pwmchip_add(&pdev->dev, &lp3943_pwm->chip);
 }
 
 #ifdef CONFIG_OF
@@ -298,7 +289,6 @@ MODULE_DEVICE_TABLE(of, lp3943_pwm_of_match);
 
 static struct platform_driver lp3943_pwm_driver = {
 	.probe = lp3943_pwm_probe,
-	.remove = lp3943_pwm_remove,
 	.driver = {
 		.name = "lp3943-pwm",
 		.of_match_table = of_match_ptr(lp3943_pwm_of_match),
diff --git a/drivers/pwm/pwm-lpc32xx.c b/drivers/pwm/pwm-lpc32xx.c
index 2834a0f001d3..ddeab5687cb8 100644
--- a/drivers/pwm/pwm-lpc32xx.c
+++ b/drivers/pwm/pwm-lpc32xx.c
@@ -117,29 +117,20 @@ static int lpc32xx_pwm_probe(struct platform_device *pdev)
 	lpc32xx->chip.ops = &lpc32xx_pwm_ops;
 	lpc32xx->chip.npwm = 1;
 
-	ret = pwmchip_add(&lpc32xx->chip);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
-		return ret;
-	}
-
-	/* When PWM is disable, configure the output to the default value */
+	/* If PWM is disabled, configure the output to the default value */
 	val = readl(lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
 	val &= ~PWM_PIN_LEVEL;
 	writel(val, lpc32xx->base + (lpc32xx->chip.pwms[0].hwpwm << 2));
 
-	platform_set_drvdata(pdev, lpc32xx);
+	ret = devm_pwmchip_add(&pdev->dev, &lpc32xx->chip);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed to add PWM chip, error %d\n", ret);
+		return ret;
+	}
 
 	return 0;
 }
 
-static int lpc32xx_pwm_remove(struct platform_device *pdev)
-{
-	struct lpc32xx_pwm_chip *lpc32xx = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&lpc32xx->chip);
-}
-
 static const struct of_device_id lpc32xx_pwm_dt_ids[] = {
 	{ .compatible = "nxp,lpc3220-pwm", },
 	{ /* sentinel */ }
@@ -152,7 +143,6 @@ static struct platform_driver lpc32xx_pwm_driver = {
 		.of_match_table = lpc32xx_pwm_dt_ids,
 	},
 	.probe = lpc32xx_pwm_probe,
-	.remove = lpc32xx_pwm_remove,
 };
 module_platform_driver(lpc32xx_pwm_driver);
 
diff --git a/drivers/pwm/pwm-mediatek.c b/drivers/pwm/pwm-mediatek.c
index b4a31060bcd7..0d4dd80e9f07 100644
--- a/drivers/pwm/pwm-mediatek.c
+++ b/drivers/pwm/pwm-mediatek.c
@@ -253,13 +253,11 @@ static int pwm_mediatek_probe(struct platform_device *pdev)
 		}
 	}
 
-	platform_set_drvdata(pdev, pc);
-
 	pc->chip.dev = &pdev->dev;
 	pc->chip.ops = &pwm_mediatek_ops;
 	pc->chip.npwm = pc->soc->num_pwms;
 
-	ret = pwmchip_add(&pc->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 		return ret;
@@ -268,13 +266,6 @@ static int pwm_mediatek_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int pwm_mediatek_remove(struct platform_device *pdev)
-{
-	struct pwm_mediatek_chip *pc = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&pc->chip);
-}
-
 static const struct pwm_mediatek_of_data mt2712_pwm_data = {
 	.num_pwms = 8,
 	.pwm45_fixup = false,
@@ -335,7 +326,6 @@ static struct platform_driver pwm_mediatek_driver = {
 		.of_match_table = pwm_mediatek_of_match,
 	},
 	.probe = pwm_mediatek_probe,
-	.remove = pwm_mediatek_remove,
 };
 module_platform_driver(pwm_mediatek_driver);
 
diff --git a/drivers/pwm/pwm-mtk-disp.c b/drivers/pwm/pwm-mtk-disp.c
index 9b3ba401a3db..c605013e4114 100644
--- a/drivers/pwm/pwm-mtk-disp.c
+++ b/drivers/pwm/pwm-mtk-disp.c
@@ -5,6 +5,7 @@
  * Author: YH Huang <yh.huang@mediatek.com>
  */
 
+#include <linux/bitfield.h>
 #include <linux/clk.h>
 #include <linux/err.h>
 #include <linux/io.h>
@@ -47,6 +48,7 @@ struct mtk_disp_pwm {
 	struct clk *clk_main;
 	struct clk *clk_mm;
 	void __iomem *base;
+	bool enabled;
 };
 
 static inline struct mtk_disp_pwm *to_mtk_disp_pwm(struct pwm_chip *chip)
@@ -66,14 +68,47 @@ static void mtk_disp_pwm_update_bits(struct mtk_disp_pwm *mdp, u32 offset,
 	writel(value, address);
 }
 
-static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
-			       int duty_ns, int period_ns)
+static int mtk_disp_pwm_apply(struct pwm_chip *chip, struct pwm_device *pwm,
+			      const struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
 	u32 clk_div, period, high_width, value;
 	u64 div, rate;
 	int err;
 
+	if (state->polarity != PWM_POLARITY_NORMAL)
+		return -EINVAL;
+
+	if (!state->enabled) {
+		mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+					 0x0);
+
+		if (mdp->enabled) {
+			clk_disable_unprepare(mdp->clk_mm);
+			clk_disable_unprepare(mdp->clk_main);
+		}
+
+		mdp->enabled = false;
+		return 0;
+	}
+
+	if (!mdp->enabled) {
+		err = clk_prepare_enable(mdp->clk_main);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n",
+				ERR_PTR(err));
+			return err;
+		}
+
+		err = clk_prepare_enable(mdp->clk_mm);
+		if (err < 0) {
+			dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n",
+				ERR_PTR(err));
+			clk_disable_unprepare(mdp->clk_main);
+			return err;
+		}
+	}
+
 	/*
 	 * Find period, high_width and clk_div to suit duty_ns and period_ns.
 	 * Calculate proper div value to keep period value in the bound.
@@ -85,29 +120,24 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 	 * high_width = (PWM_CLK_RATE * duty_ns) / (10^9 * (clk_div + 1))
 	 */
 	rate = clk_get_rate(mdp->clk_main);
-	clk_div = div_u64(rate * period_ns, NSEC_PER_SEC) >>
+	clk_div = mul_u64_u64_div_u64(state->period, rate, NSEC_PER_SEC) >>
 			  PWM_PERIOD_BIT_WIDTH;
-	if (clk_div > PWM_CLKDIV_MAX)
+	if (clk_div > PWM_CLKDIV_MAX) {
+		if (!mdp->enabled) {
+			clk_disable_unprepare(mdp->clk_mm);
+			clk_disable_unprepare(mdp->clk_main);
+		}
 		return -EINVAL;
+	}
 
 	div = NSEC_PER_SEC * (clk_div + 1);
-	period = div64_u64(rate * period_ns, div);
+	period = mul_u64_u64_div_u64(state->period, rate, div);
 	if (period > 0)
 		period--;
 
-	high_width = div64_u64(rate * duty_ns, div);
+	high_width = mul_u64_u64_div_u64(state->duty_cycle, rate, div);
 	value = period | (high_width << PWM_HIGH_WIDTH_SHIFT);
 
-	err = clk_enable(mdp->clk_main);
-	if (err < 0)
-		return err;
-
-	err = clk_enable(mdp->clk_mm);
-	if (err < 0) {
-		clk_disable(mdp->clk_main);
-		return err;
-	}
-
 	mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
 				 PWM_CLKDIV_MASK,
 				 clk_div << PWM_CLKDIV_SHIFT);
@@ -122,50 +152,70 @@ static int mtk_disp_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
 		mtk_disp_pwm_update_bits(mdp, mdp->data->commit,
 					 mdp->data->commit_mask,
 					 0x0);
+	} else {
+		/*
+		 * For MT2701, disable double buffer before writing register
+		 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
+		 */
+		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
+					 mdp->data->bls_debug_mask,
+					 mdp->data->bls_debug_mask);
+		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
+					 mdp->data->con0_sel,
+					 mdp->data->con0_sel);
 	}
 
-	clk_disable(mdp->clk_mm);
-	clk_disable(mdp->clk_main);
+	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
+				 mdp->data->enable_mask);
+	mdp->enabled = true;
 
 	return 0;
 }
 
-static int mtk_disp_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
+static void mtk_disp_pwm_get_state(struct pwm_chip *chip,
+				   struct pwm_device *pwm,
+				   struct pwm_state *state)
 {
 	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
+	u64 rate, period, high_width;
+	u32 clk_div, con0, con1;
 	int err;
 
-	err = clk_enable(mdp->clk_main);
-	if (err < 0)
-		return err;
-
-	err = clk_enable(mdp->clk_mm);
+	err = clk_prepare_enable(mdp->clk_main);
 	if (err < 0) {
-		clk_disable(mdp->clk_main);
-		return err;
+		dev_err(chip->dev, "Can't enable mdp->clk_main: %pe\n", ERR_PTR(err));
+		return;
 	}
 
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 mdp->data->enable_mask);
-
-	return 0;
-}
-
-static void mtk_disp_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
-{
-	struct mtk_disp_pwm *mdp = to_mtk_disp_pwm(chip);
-
-	mtk_disp_pwm_update_bits(mdp, DISP_PWM_EN, mdp->data->enable_mask,
-				 0x0);
+	err = clk_prepare_enable(mdp->clk_mm);
+	if (err < 0) {
+		dev_err(chip->dev, "Can't enable mdp->clk_mm: %pe\n", ERR_PTR(err));
+		clk_disable_unprepare(mdp->clk_main);
+		return;
+	}
 
-	clk_disable(mdp->clk_mm);
-	clk_disable(mdp->clk_main);
+	rate = clk_get_rate(mdp->clk_main);
+	con0 = readl(mdp->base + mdp->data->con0);
+	con1 = readl(mdp->base + mdp->data->con1);
+	state->enabled = !!(con0 & BIT(0));
+	clk_div = FIELD_GET(PWM_CLKDIV_MASK, con0);
+	period = FIELD_GET(PWM_PERIOD_MASK, con1);
+	/*
+	 * period has 12 bits, clk_div 11 and NSEC_PER_SEC has 30,
+	 * so period * (clk_div + 1) * NSEC_PER_SEC doesn't overflow.
+	 */
+	state->period = DIV64_U64_ROUND_UP(period * (clk_div + 1) * NSEC_PER_SEC, rate);
+	high_width = FIELD_GET(PWM_HIGH_WIDTH_MASK, con1);
+	state->duty_cycle = DIV64_U64_ROUND_UP(high_width * (clk_div + 1) * NSEC_PER_SEC,
+					       rate);
+	state->polarity = PWM_POLARITY_NORMAL;
+	clk_disable_unprepare(mdp->clk_mm);
+	clk_disable_unprepare(mdp->clk_main);
 }
 
 static const struct pwm_ops mtk_disp_pwm_ops = {
-	.config = mtk_disp_pwm_config,
-	.enable = mtk_disp_pwm_enable,
-	.disable = mtk_disp_pwm_disable,
+	.apply = mtk_disp_pwm_apply,
+	.get_state = mtk_disp_pwm_get_state,
 	.owner = THIS_MODULE,
 };
 
@@ -192,58 +242,28 @@ static int mtk_disp_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(mdp->clk_mm))
 		return PTR_ERR(mdp->clk_mm);
 
-	ret = clk_prepare(mdp->clk_main);
-	if (ret < 0)
-		return ret;
-
-	ret = clk_prepare(mdp->clk_mm);
-	if (ret < 0)
-		goto disable_clk_main;
-
 	mdp->chip.dev = &pdev->dev;
 	mdp->chip.ops = &mtk_disp_pwm_ops;
 	mdp->chip.npwm = 1;
 
 	ret = pwmchip_add(&mdp->chip);
 	if (ret < 0) {
-		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
-		goto disable_clk_mm;
+		dev_err(&pdev->dev, "pwmchip_add() failed: %pe\n", ERR_PTR(ret));
+		return ret;
 	}
 
 	platform_set_drvdata(pdev, mdp);
 
-	/*
-	 * For MT2701, disable double buffer before writing register
-	 * and select manual mode and use PWM_PERIOD/PWM_HIGH_WIDTH.
-	 */
-	if (!mdp->data->has_commit) {
-		mtk_disp_pwm_update_bits(mdp, mdp->data->bls_debug,
-					 mdp->data->bls_debug_mask,
-					 mdp->data->bls_debug_mask);
-		mtk_disp_pwm_update_bits(mdp, mdp->data->con0,
-					 mdp->data->con0_sel,
-					 mdp->data->con0_sel);
-	}
-
 	return 0;
-
-disable_clk_mm:
-	clk_unprepare(mdp->clk_mm);
-disable_clk_main:
-	clk_unprepare(mdp->clk_main);
-	return ret;
 }
 
 static int mtk_disp_pwm_remove(struct platform_device *pdev)
 {
 	struct mtk_disp_pwm *mdp = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&mdp->chip);
-	clk_unprepare(mdp->clk_mm);
-	clk_unprepare(mdp->clk_main);
+	pwmchip_remove(&mdp->chip);
 
-	return ret;
+	return 0;
 }
 
 static const struct mtk_pwm_data mt2701_pwm_data = {
diff --git a/drivers/pwm/pwm-mxs.c b/drivers/pwm/pwm-mxs.c
index a22180803bd7..766dbc58dad8 100644
--- a/drivers/pwm/pwm-mxs.c
+++ b/drivers/pwm/pwm-mxs.c
@@ -145,30 +145,18 @@ static int mxs_pwm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	ret = pwmchip_add(&mxs->chip);
+	/* FIXME: Only do this if the PWM isn't already running */
+	ret = stmp_reset_block(mxs->base);
+	if (ret)
+		return dev_err_probe(&pdev->dev, ret, "failed to reset PWM\n");
+
+	ret = devm_pwmchip_add(&pdev->dev, &mxs->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "failed to add pwm chip %d\n", ret);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, mxs);
-
-	ret = stmp_reset_block(mxs->base);
-	if (ret)
-		goto pwm_remove;
-
 	return 0;
-
-pwm_remove:
-	pwmchip_remove(&mxs->chip);
-	return ret;
-}
-
-static int mxs_pwm_remove(struct platform_device *pdev)
-{
-	struct mxs_pwm_chip *mxs = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&mxs->chip);
 }
 
 static const struct of_device_id mxs_pwm_dt_ids[] = {
@@ -183,7 +171,6 @@ static struct platform_driver mxs_pwm_driver = {
 		.of_match_table = mxs_pwm_dt_ids,
 	},
 	.probe = mxs_pwm_probe,
-	.remove = mxs_pwm_remove,
 };
 module_platform_driver(mxs_pwm_driver);
 
diff --git a/drivers/pwm/pwm-ntxec.c b/drivers/pwm/pwm-ntxec.c
index 50c454c553c4..ab63b081df53 100644
--- a/drivers/pwm/pwm-ntxec.c
+++ b/drivers/pwm/pwm-ntxec.c
@@ -150,23 +150,12 @@ static int ntxec_pwm_probe(struct platform_device *pdev)
 	priv->ec = ec;
 	priv->dev = &pdev->dev;
 
-	platform_set_drvdata(pdev, priv);
-
 	chip = &priv->chip;
 	chip->dev = &pdev->dev;
 	chip->ops = &ntxec_pwm_ops;
-	chip->base = -1;
 	chip->npwm = 1;
 
-	return pwmchip_add(chip);
-}
-
-static int ntxec_pwm_remove(struct platform_device *pdev)
-{
-	struct ntxec_pwm *priv = platform_get_drvdata(pdev);
-	struct pwm_chip *chip = &priv->chip;
-
-	return pwmchip_remove(chip);
+	return devm_pwmchip_add(&pdev->dev, chip);
 }
 
 static struct platform_driver ntxec_pwm_driver = {
@@ -174,7 +163,6 @@ static struct platform_driver ntxec_pwm_driver = {
 		.name = "ntxec-pwm",
 	},
 	.probe = ntxec_pwm_probe,
-	.remove = ntxec_pwm_remove,
 };
 module_platform_driver(ntxec_pwm_driver);
 
diff --git a/drivers/pwm/pwm-omap-dmtimer.c b/drivers/pwm/pwm-omap-dmtimer.c
index 507a2d945b90..fa800fcf31d4 100644
--- a/drivers/pwm/pwm-omap-dmtimer.c
+++ b/drivers/pwm/pwm-omap-dmtimer.c
@@ -444,11 +444,8 @@ err_find_timer_pdev:
 static int pwm_omap_dmtimer_remove(struct platform_device *pdev)
 {
 	struct pwm_omap_dmtimer_chip *omap = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&omap->chip);
-	if (ret)
-		return ret;
+	pwmchip_remove(&omap->chip);
 
 	if (pm_runtime_active(&omap->dm_timer_pdev->dev))
 		omap->pdata->stop(omap->dm_timer);
diff --git a/drivers/pwm/pwm-pca9685.c b/drivers/pwm/pwm-pca9685.c
index 42ed770b432c..c56001a790d0 100644
--- a/drivers/pwm/pwm-pca9685.c
+++ b/drivers/pwm/pwm-pca9685.c
@@ -601,11 +601,8 @@ static int pca9685_pwm_probe(struct i2c_client *client,
 static int pca9685_pwm_remove(struct i2c_client *client)
 {
 	struct pca9685 *pca = i2c_get_clientdata(client);
-	int ret;
 
-	ret = pwmchip_remove(&pca->chip);
-	if (ret)
-		return ret;
+	pwmchip_remove(&pca->chip);
 
 	if (!pm_runtime_enabled(&client->dev)) {
 		/* Put chip in sleep state if runtime PM is disabled */
diff --git a/drivers/pwm/pwm-pxa.c b/drivers/pwm/pwm-pxa.c
index e091a528e33c..a9efdcf839ae 100644
--- a/drivers/pwm/pwm-pxa.c
+++ b/drivers/pwm/pwm-pxa.c
@@ -195,32 +195,21 @@ static int pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->mmio_base))
 		return PTR_ERR(pc->mmio_base);
 
-	ret = pwmchip_add(&pc->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 		return ret;
 	}
 
-	platform_set_drvdata(pdev, pc);
 	return 0;
 }
 
-static int pwm_remove(struct platform_device *pdev)
-{
-	struct pxa_pwm_chip *pc;
-
-	pc = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&pc->chip);
-}
-
 static struct platform_driver pwm_driver = {
 	.driver		= {
 		.name	= "pxa25x-pwm",
 		.of_match_table = pwm_of_match,
 	},
 	.probe		= pwm_probe,
-	.remove		= pwm_remove,
 	.id_table	= pwm_id_table,
 };
 
diff --git a/drivers/pwm/pwm-raspberrypi-poe.c b/drivers/pwm/pwm-raspberrypi-poe.c
index 043fc32e8be8..579a15240e0a 100644
--- a/drivers/pwm/pwm-raspberrypi-poe.c
+++ b/drivers/pwm/pwm-raspberrypi-poe.c
@@ -166,8 +166,6 @@ static int raspberrypi_pwm_probe(struct platform_device *pdev)
 	rpipwm->chip.base = -1;
 	rpipwm->chip.npwm = RASPBERRYPI_FIRMWARE_PWM_NUM;
 
-	platform_set_drvdata(pdev, rpipwm);
-
 	ret = raspberrypi_pwm_get_property(rpipwm->firmware, RPI_PWM_CUR_DUTY_REG,
 					   &rpipwm->duty_cycle);
 	if (ret) {
@@ -175,14 +173,7 @@ static int raspberrypi_pwm_probe(struct platform_device *pdev)
 		return ret;
 	}
 
-	return pwmchip_add(&rpipwm->chip);
-}
-
-static int raspberrypi_pwm_remove(struct platform_device *pdev)
-{
-	struct raspberrypi_pwm *rpipwm = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&rpipwm->chip);
+	return devm_pwmchip_add(dev, &rpipwm->chip);
 }
 
 static const struct of_device_id raspberrypi_pwm_of_match[] = {
@@ -197,7 +188,6 @@ static struct platform_driver raspberrypi_pwm_driver = {
 		.of_match_table = raspberrypi_pwm_of_match,
 	},
 	.probe = raspberrypi_pwm_probe,
-	.remove = raspberrypi_pwm_remove,
 };
 module_platform_driver(raspberrypi_pwm_driver);
 
diff --git a/drivers/pwm/pwm-rcar.c b/drivers/pwm/pwm-rcar.c
index 9daca0c772c7..b437192380e2 100644
--- a/drivers/pwm/pwm-rcar.c
+++ b/drivers/pwm/pwm-rcar.c
@@ -241,13 +241,12 @@ static int rcar_pwm_probe(struct platform_device *pdev)
 static int rcar_pwm_remove(struct platform_device *pdev)
 {
 	struct rcar_pwm_chip *rcar_pwm = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&rcar_pwm->chip);
+	pwmchip_remove(&rcar_pwm->chip);
 
 	pm_runtime_disable(&pdev->dev);
 
-	return ret;
+	return 0;
 }
 
 static const struct of_device_id rcar_pwm_of_table[] = {
diff --git a/drivers/pwm/pwm-renesas-tpu.c b/drivers/pwm/pwm-renesas-tpu.c
index b853e7942605..4381df90a527 100644
--- a/drivers/pwm/pwm-renesas-tpu.c
+++ b/drivers/pwm/pwm-renesas-tpu.c
@@ -425,13 +425,12 @@ static int tpu_probe(struct platform_device *pdev)
 static int tpu_remove(struct platform_device *pdev)
 {
 	struct tpu_device *tpu = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&tpu->chip);
+	pwmchip_remove(&tpu->chip);
 
 	pm_runtime_disable(&pdev->dev);
 
-	return ret;
+	return 0;
 }
 
 #ifdef CONFIG_OF
diff --git a/drivers/pwm/pwm-rockchip.c b/drivers/pwm/pwm-rockchip.c
index cbe900877724..f3647b317152 100644
--- a/drivers/pwm/pwm-rockchip.c
+++ b/drivers/pwm/pwm-rockchip.c
@@ -384,24 +384,12 @@ static int rockchip_pwm_remove(struct platform_device *pdev)
 {
 	struct rockchip_pwm_chip *pc = platform_get_drvdata(pdev);
 
-	/*
-	 * Disable the PWM clk before unpreparing it if the PWM device is still
-	 * running. This should only happen when the last PWM user left it
-	 * enabled, or when nobody requested a PWM that was previously enabled
-	 * by the bootloader.
-	 *
-	 * FIXME: Maybe the core should disable all PWM devices in
-	 * pwmchip_remove(). In this case we'd only have to call
-	 * clk_unprepare() after pwmchip_remove().
-	 *
-	 */
-	if (pwm_is_enabled(pc->chip.pwms))
-		clk_disable(pc->clk);
+	pwmchip_remove(&pc->chip);
 
 	clk_unprepare(pc->pclk);
 	clk_unprepare(pc->clk);
 
-	return pwmchip_remove(&pc->chip);
+	return 0;
 }
 
 static struct platform_driver rockchip_pwm_driver = {
diff --git a/drivers/pwm/pwm-samsung.c b/drivers/pwm/pwm-samsung.c
index f6c528f02d43..dd94c4312a0c 100644
--- a/drivers/pwm/pwm-samsung.c
+++ b/drivers/pwm/pwm-samsung.c
@@ -580,11 +580,8 @@ static int pwm_samsung_probe(struct platform_device *pdev)
 static int pwm_samsung_remove(struct platform_device *pdev)
 {
 	struct samsung_pwm_chip *chip = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&chip->chip);
-	if (ret < 0)
-		return ret;
+	pwmchip_remove(&chip->chip);
 
 	clk_disable_unprepare(chip->base_clk);
 
diff --git a/drivers/pwm/pwm-sifive.c b/drivers/pwm/pwm-sifive.c
index 420edc4aa94a..253c4a17d255 100644
--- a/drivers/pwm/pwm-sifive.c
+++ b/drivers/pwm/pwm-sifive.c
@@ -291,7 +291,7 @@ static int pwm_sifive_remove(struct platform_device *dev)
 	struct pwm_sifive_ddata *ddata = platform_get_drvdata(dev);
 	bool is_enabled = false;
 	struct pwm_device *pwm;
-	int ret, ch;
+	int ch;
 
 	for (ch = 0; ch < ddata->chip.npwm; ch++) {
 		pwm = &ddata->chip.pwms[ch];
@@ -304,10 +304,10 @@ static int pwm_sifive_remove(struct platform_device *dev)
 		clk_disable(ddata->clk);
 
 	clk_disable_unprepare(ddata->clk);
-	ret = pwmchip_remove(&ddata->chip);
+	pwmchip_remove(&ddata->chip);
 	clk_notifier_unregister(ddata->clk, &ddata->notifier);
 
-	return ret;
+	return 0;
 }
 
 static const struct of_device_id pwm_sifive_of_match[] = {
diff --git a/drivers/pwm/pwm-sl28cpld.c b/drivers/pwm/pwm-sl28cpld.c
index 7a69c1a0c060..589aeaaa6ac8 100644
--- a/drivers/pwm/pwm-sl28cpld.c
+++ b/drivers/pwm/pwm-sl28cpld.c
@@ -231,9 +231,7 @@ static int sl28cpld_pwm_probe(struct platform_device *pdev)
 	chip->ops = &sl28cpld_pwm_ops;
 	chip->npwm = 1;
 
-	platform_set_drvdata(pdev, priv);
-
-	ret = pwmchip_add(&priv->pwm_chip);
+	ret = devm_pwmchip_add(&pdev->dev, &priv->pwm_chip);
 	if (ret) {
 		dev_err(&pdev->dev, "failed to add PWM chip (%pe)",
 			ERR_PTR(ret));
@@ -243,13 +241,6 @@ static int sl28cpld_pwm_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int sl28cpld_pwm_remove(struct platform_device *pdev)
-{
-	struct sl28cpld_pwm *priv = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&priv->pwm_chip);
-}
-
 static const struct of_device_id sl28cpld_pwm_of_match[] = {
 	{ .compatible = "kontron,sl28cpld-pwm" },
 	{}
@@ -258,7 +249,6 @@ MODULE_DEVICE_TABLE(of, sl28cpld_pwm_of_match);
 
 static struct platform_driver sl28cpld_pwm_driver = {
 	.probe = sl28cpld_pwm_probe,
-	.remove	= sl28cpld_pwm_remove,
 	.driver = {
 		.name = "sl28cpld-pwm",
 		.of_match_table = sl28cpld_pwm_of_match,
diff --git a/drivers/pwm/pwm-stm32-lp.c b/drivers/pwm/pwm-stm32-lp.c
index 93dd03618465..3115abb3f52a 100644
--- a/drivers/pwm/pwm-stm32-lp.c
+++ b/drivers/pwm/pwm-stm32-lp.c
@@ -209,7 +209,7 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
 	priv->chip.ops = &stm32_pwm_lp_ops;
 	priv->chip.npwm = 1;
 
-	ret = pwmchip_add(&priv->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &priv->chip);
 	if (ret < 0)
 		return ret;
 
@@ -218,15 +218,6 @@ static int stm32_pwm_lp_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int stm32_pwm_lp_remove(struct platform_device *pdev)
-{
-	struct stm32_pwm_lp *priv = platform_get_drvdata(pdev);
-
-	pwm_disable(&priv->chip.pwms[0]);
-
-	return pwmchip_remove(&priv->chip);
-}
-
 static int __maybe_unused stm32_pwm_lp_suspend(struct device *dev)
 {
 	struct stm32_pwm_lp *priv = dev_get_drvdata(dev);
@@ -258,7 +249,6 @@ MODULE_DEVICE_TABLE(of, stm32_pwm_lp_of_match);
 
 static struct platform_driver stm32_pwm_lp_driver = {
 	.probe	= stm32_pwm_lp_probe,
-	.remove	= stm32_pwm_lp_remove,
 	.driver	= {
 		.name = "stm32-pwm-lp",
 		.of_match_table = of_match_ptr(stm32_pwm_lp_of_match),
diff --git a/drivers/pwm/pwm-sun4i.c b/drivers/pwm/pwm-sun4i.c
index c952604e91f3..91ca67651abd 100644
--- a/drivers/pwm/pwm-sun4i.c
+++ b/drivers/pwm/pwm-sun4i.c
@@ -484,11 +484,8 @@ err_bus:
 static int sun4i_pwm_remove(struct platform_device *pdev)
 {
 	struct sun4i_pwm_chip *pwm = platform_get_drvdata(pdev);
-	int ret;
 
-	ret = pwmchip_remove(&pwm->chip);
-	if (ret)
-		return ret;
+	pwmchip_remove(&pwm->chip);
 
 	clk_disable_unprepare(pwm->bus_clk);
 	reset_control_assert(pwm->rst);
diff --git a/drivers/pwm/pwm-tiecap.c b/drivers/pwm/pwm-tiecap.c
index 35eb19a5a0d1..4701f0c9b921 100644
--- a/drivers/pwm/pwm-tiecap.c
+++ b/drivers/pwm/pwm-tiecap.c
@@ -253,7 +253,7 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 	if (IS_ERR(pc->mmio_base))
 		return PTR_ERR(pc->mmio_base);
 
-	ret = pwmchip_add(&pc->chip);
+	ret = devm_pwmchip_add(&pdev->dev, &pc->chip);
 	if (ret < 0) {
 		dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
 		return ret;
@@ -267,11 +267,9 @@ static int ecap_pwm_probe(struct platform_device *pdev)
 
 static int ecap_pwm_remove(struct platform_device *pdev)
 {
-	struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
-
 	pm_runtime_disable(&pdev->dev);
 
-	return pwmchip_remove(&pc->chip);
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/pwm/pwm-tiehrpwm.c b/drivers/pwm/pwm-tiehrpwm.c
index 17909fa53211..5b723a48c5f1 100644
--- a/drivers/pwm/pwm-tiehrpwm.c
+++ b/drivers/pwm/pwm-tiehrpwm.c
@@ -485,11 +485,13 @@ static int ehrpwm_pwm_remove(struct platform_device *pdev)
 {
 	struct ehrpwm_pwm_chip *pc = platform_get_drvdata(pdev);
 
+	pwmchip_remove(&pc->chip);
+
 	clk_unprepare(pc->tbclk);
 
 	pm_runtime_disable(&pdev->dev);
 
-	return pwmchip_remove(&pc->chip);
+	return 0;
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/pwm/pwm-twl-led.c b/drivers/pwm/pwm-twl-led.c
index 6c8df5f4e87d..49d9f7a78012 100644
--- a/drivers/pwm/pwm-twl-led.c
+++ b/drivers/pwm/pwm-twl-led.c
@@ -276,7 +276,6 @@ static const struct pwm_ops twl6030_pwmled_ops = {
 static int twl_pwmled_probe(struct platform_device *pdev)
 {
 	struct twl_pwmled_chip *twl;
-	int ret;
 
 	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
 	if (!twl)
@@ -294,20 +293,7 @@ static int twl_pwmled_probe(struct platform_device *pdev)
 
 	mutex_init(&twl->mutex);
 
-	ret = pwmchip_add(&twl->chip);
-	if (ret < 0)
-		return ret;
-
-	platform_set_drvdata(pdev, twl);
-
-	return 0;
-}
-
-static int twl_pwmled_remove(struct platform_device *pdev)
-{
-	struct twl_pwmled_chip *twl = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&twl->chip);
+	return devm_pwmchip_add(&pdev->dev, &twl->chip);
 }
 
 #ifdef CONFIG_OF
@@ -325,7 +311,6 @@ static struct platform_driver twl_pwmled_driver = {
 		.of_match_table = of_match_ptr(twl_pwmled_of_match),
 	},
 	.probe = twl_pwmled_probe,
-	.remove = twl_pwmled_remove,
 };
 module_platform_driver(twl_pwmled_driver);
 
diff --git a/drivers/pwm/pwm-twl.c b/drivers/pwm/pwm-twl.c
index e83a826bf621..203194f2c92e 100644
--- a/drivers/pwm/pwm-twl.c
+++ b/drivers/pwm/pwm-twl.c
@@ -298,7 +298,6 @@ static const struct pwm_ops twl6030_pwm_ops = {
 static int twl_pwm_probe(struct platform_device *pdev)
 {
 	struct twl_pwm_chip *twl;
-	int ret;
 
 	twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL);
 	if (!twl)
@@ -314,20 +313,7 @@ static int twl_pwm_probe(struct platform_device *pdev)
 
 	mutex_init(&twl->mutex);
 
-	ret = pwmchip_add(&twl->chip);
-	if (ret < 0)
-		return ret;
-
-	platform_set_drvdata(pdev, twl);
-
-	return 0;
-}
-
-static int twl_pwm_remove(struct platform_device *pdev)
-{
-	struct twl_pwm_chip *twl = platform_get_drvdata(pdev);
-
-	return pwmchip_remove(&twl->chip);
+	return devm_pwmchip_add(&pdev->dev, &twl->chip);
 }
 
 #ifdef CONFIG_OF
@@ -345,7 +331,6 @@ static struct platform_driver twl_pwm_driver = {
 		.of_match_table = of_match_ptr(twl_pwm_of_match),
 	},
 	.probe = twl_pwm_probe,
-	.remove = twl_pwm_remove,
 };
 module_platform_driver(twl_pwm_driver);
 
diff --git a/drivers/remoteproc/qcom_q6v5_pas.c b/drivers/remoteproc/qcom_q6v5_pas.c
index a79bee901e9b..401b1ec90785 100644
--- a/drivers/remoteproc/qcom_q6v5_pas.c
+++ b/drivers/remoteproc/qcom_q6v5_pas.c
@@ -833,6 +833,7 @@ static const struct of_device_id adsp_of_match[] = {
 	{ .compatible = "qcom,sc8180x-adsp-pas", .data = &sm8150_adsp_resource},
 	{ .compatible = "qcom,sc8180x-cdsp-pas", .data = &sm8150_cdsp_resource},
 	{ .compatible = "qcom,sc8180x-mpss-pas", .data = &sc8180x_mpss_resource},
+	{ .compatible = "qcom,sdm660-adsp-pas", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sdm845-adsp-pas", .data = &adsp_resource_init},
 	{ .compatible = "qcom,sdm845-cdsp-pas", .data = &cdsp_resource_init},
 	{ .compatible = "qcom,sdx55-mpss-pas", .data = &sdx55_mpss_resource},
diff --git a/drivers/remoteproc/qcom_wcnss.c b/drivers/remoteproc/qcom_wcnss.c
index f1cbc6b2edbb..ebadc6c08e11 100644
--- a/drivers/remoteproc/qcom_wcnss.c
+++ b/drivers/remoteproc/qcom_wcnss.c
@@ -142,18 +142,6 @@ static const struct wcnss_data pronto_v2_data = {
 	.num_vregs = 1,
 };
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss,
-			    struct qcom_iris *iris,
-			    bool use_48mhz_xo)
-{
-	mutex_lock(&wcnss->iris_lock);
-
-	wcnss->iris = iris;
-	wcnss->use_48mhz_xo = use_48mhz_xo;
-
-	mutex_unlock(&wcnss->iris_lock);
-}
-
 static int wcnss_load(struct rproc *rproc, const struct firmware *fw)
 {
 	struct qcom_wcnss *wcnss = (struct qcom_wcnss *)rproc->priv;
@@ -639,12 +627,20 @@ static int wcnss_probe(struct platform_device *pdev)
 		goto detach_pds;
 	}
 
+	wcnss->iris = qcom_iris_probe(&pdev->dev, &wcnss->use_48mhz_xo);
+	if (IS_ERR(wcnss->iris)) {
+		ret = PTR_ERR(wcnss->iris);
+		goto detach_pds;
+	}
+
 	ret = rproc_add(rproc);
 	if (ret)
-		goto detach_pds;
+		goto remove_iris;
 
-	return of_platform_populate(pdev->dev.of_node, NULL, NULL, &pdev->dev);
+	return 0;
 
+remove_iris:
+	qcom_iris_remove(wcnss->iris);
 detach_pds:
 	wcnss_release_pds(wcnss);
 free_rproc:
@@ -657,7 +653,7 @@ static int wcnss_remove(struct platform_device *pdev)
 {
 	struct qcom_wcnss *wcnss = platform_get_drvdata(pdev);
 
-	of_platform_depopulate(&pdev->dev);
+	qcom_iris_remove(wcnss->iris);
 
 	rproc_del(wcnss->rproc);
 
@@ -686,28 +682,7 @@ static struct platform_driver wcnss_driver = {
 	},
 };
 
-static int __init wcnss_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&wcnss_driver);
-	if (ret)
-		return ret;
-
-	ret = platform_driver_register(&qcom_iris_driver);
-	if (ret)
-		platform_driver_unregister(&wcnss_driver);
-
-	return ret;
-}
-module_init(wcnss_init);
-
-static void __exit wcnss_exit(void)
-{
-	platform_driver_unregister(&qcom_iris_driver);
-	platform_driver_unregister(&wcnss_driver);
-}
-module_exit(wcnss_exit);
+module_platform_driver(wcnss_driver);
 
 MODULE_DESCRIPTION("Qualcomm Peripheral Image Loader for Wireless Subsystem");
 MODULE_LICENSE("GPL v2");
diff --git a/drivers/remoteproc/qcom_wcnss.h b/drivers/remoteproc/qcom_wcnss.h
index 62c8682d0a92..6d01ee6afa7f 100644
--- a/drivers/remoteproc/qcom_wcnss.h
+++ b/drivers/remoteproc/qcom_wcnss.h
@@ -17,9 +17,9 @@ struct wcnss_vreg_info {
 	bool super_turbo;
 };
 
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo);
+void qcom_iris_remove(struct qcom_iris *iris);
 int qcom_iris_enable(struct qcom_iris *iris);
 void qcom_iris_disable(struct qcom_iris *iris);
 
-void qcom_wcnss_assign_iris(struct qcom_wcnss *wcnss, struct qcom_iris *iris, bool use_48mhz_xo);
-
 #endif
diff --git a/drivers/remoteproc/qcom_wcnss_iris.c b/drivers/remoteproc/qcom_wcnss_iris.c
index 169acd305ae3..09720ddddc85 100644
--- a/drivers/remoteproc/qcom_wcnss_iris.c
+++ b/drivers/remoteproc/qcom_wcnss_iris.c
@@ -17,7 +17,7 @@
 #include "qcom_wcnss.h"
 
 struct qcom_iris {
-	struct device *dev;
+	struct device dev;
 
 	struct clk *xo_clk;
 
@@ -75,7 +75,7 @@ int qcom_iris_enable(struct qcom_iris *iris)
 
 	ret = clk_prepare_enable(iris->xo_clk);
 	if (ret) {
-		dev_err(iris->dev, "failed to enable xo clk\n");
+		dev_err(&iris->dev, "failed to enable xo clk\n");
 		goto disable_regulators;
 	}
 
@@ -93,43 +93,90 @@ void qcom_iris_disable(struct qcom_iris *iris)
 	regulator_bulk_disable(iris->num_vregs, iris->vregs);
 }
 
-static int qcom_iris_probe(struct platform_device *pdev)
+static const struct of_device_id iris_of_match[] = {
+	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
+	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
+	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
+	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
+	{}
+};
+
+static void qcom_iris_release(struct device *dev)
+{
+	struct qcom_iris *iris = container_of(dev, struct qcom_iris, dev);
+
+	of_node_put(iris->dev.of_node);
+	kfree(iris);
+}
+
+struct qcom_iris *qcom_iris_probe(struct device *parent, bool *use_48mhz_xo)
 {
+	const struct of_device_id *match;
 	const struct iris_data *data;
-	struct qcom_wcnss *wcnss;
+	struct device_node *of_node;
 	struct qcom_iris *iris;
 	int ret;
 	int i;
 
-	iris = devm_kzalloc(&pdev->dev, sizeof(struct qcom_iris), GFP_KERNEL);
-	if (!iris)
-		return -ENOMEM;
+	of_node = of_get_child_by_name(parent->of_node, "iris");
+	if (!of_node) {
+		dev_err(parent, "No child node \"iris\" found\n");
+		return ERR_PTR(-EINVAL);
+	}
+
+	iris = kzalloc(sizeof(*iris), GFP_KERNEL);
+	if (!iris) {
+		of_node_put(of_node);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	device_initialize(&iris->dev);
+	iris->dev.parent = parent;
+	iris->dev.release = qcom_iris_release;
+	iris->dev.of_node = of_node;
+
+	dev_set_name(&iris->dev, "%s.iris", dev_name(parent));
+
+	ret = device_add(&iris->dev);
+	if (ret) {
+		put_device(&iris->dev);
+		return ERR_PTR(ret);
+	}
+
+	match = of_match_device(iris_of_match, &iris->dev);
+	if (!match) {
+		dev_err(&iris->dev, "no matching compatible for iris\n");
+		ret = -EINVAL;
+		goto err_device_del;
+	}
 
-	data = of_device_get_match_data(&pdev->dev);
-	wcnss = dev_get_drvdata(pdev->dev.parent);
+	data = match->data;
 
-	iris->xo_clk = devm_clk_get(&pdev->dev, "xo");
+	iris->xo_clk = devm_clk_get(&iris->dev, "xo");
 	if (IS_ERR(iris->xo_clk)) {
-		if (PTR_ERR(iris->xo_clk) != -EPROBE_DEFER)
-			dev_err(&pdev->dev, "failed to acquire xo clk\n");
-		return PTR_ERR(iris->xo_clk);
+		ret = PTR_ERR(iris->xo_clk);
+		if (ret != -EPROBE_DEFER)
+			dev_err(&iris->dev, "failed to acquire xo clk\n");
+		goto err_device_del;
 	}
 
 	iris->num_vregs = data->num_vregs;
-	iris->vregs = devm_kcalloc(&pdev->dev,
+	iris->vregs = devm_kcalloc(&iris->dev,
 				   iris->num_vregs,
 				   sizeof(struct regulator_bulk_data),
 				   GFP_KERNEL);
-	if (!iris->vregs)
-		return -ENOMEM;
+	if (!iris->vregs) {
+		ret = -ENOMEM;
+		goto err_device_del;
+	}
 
 	for (i = 0; i < iris->num_vregs; i++)
 		iris->vregs[i].supply = data->vregs[i].name;
 
-	ret = devm_regulator_bulk_get(&pdev->dev, iris->num_vregs, iris->vregs);
+	ret = devm_regulator_bulk_get(&iris->dev, iris->num_vregs, iris->vregs);
 	if (ret) {
-		dev_err(&pdev->dev, "failed to get regulators\n");
-		return ret;
+		dev_err(&iris->dev, "failed to get regulators\n");
+		goto err_device_del;
 	}
 
 	for (i = 0; i < iris->num_vregs; i++) {
@@ -143,34 +190,17 @@ static int qcom_iris_probe(struct platform_device *pdev)
 					   data->vregs[i].load_uA);
 	}
 
-	qcom_wcnss_assign_iris(wcnss, iris, data->use_48mhz_xo);
-
-	return 0;
-}
+	*use_48mhz_xo = data->use_48mhz_xo;
 
-static int qcom_iris_remove(struct platform_device *pdev)
-{
-	struct qcom_wcnss *wcnss = dev_get_drvdata(pdev->dev.parent);
+	return iris;
 
-	qcom_wcnss_assign_iris(wcnss, NULL, false);
+err_device_del:
+	device_del(&iris->dev);
 
-	return 0;
+	return ERR_PTR(ret);
 }
 
-static const struct of_device_id iris_of_match[] = {
-	{ .compatible = "qcom,wcn3620", .data = &wcn3620_data },
-	{ .compatible = "qcom,wcn3660", .data = &wcn3660_data },
-	{ .compatible = "qcom,wcn3660b", .data = &wcn3680_data },
-	{ .compatible = "qcom,wcn3680", .data = &wcn3680_data },
-	{}
-};
-MODULE_DEVICE_TABLE(of, iris_of_match);
-
-struct platform_driver qcom_iris_driver = {
-	.probe = qcom_iris_probe,
-	.remove = qcom_iris_remove,
-	.driver = {
-		.name = "qcom-iris",
-		.of_match_table = iris_of_match,
-	},
-};
+void qcom_iris_remove(struct qcom_iris *iris)
+{
+	device_del(&iris->dev);
+}
diff --git a/drivers/remoteproc/remoteproc_core.c b/drivers/remoteproc/remoteproc_core.c
index 7de5905d276a..502b6604b757 100644
--- a/drivers/remoteproc/remoteproc_core.c
+++ b/drivers/remoteproc/remoteproc_core.c
@@ -2750,8 +2750,8 @@ void rproc_report_crash(struct rproc *rproc, enum rproc_crash_type type)
 	dev_err(&rproc->dev, "crash detected in %s: type %s\n",
 		rproc->name, rproc_crash_to_string(type));
 
-	/* create a new task to handle the error */
-	schedule_work(&rproc->crash_handler);
+	/* Have a worker handle the error; ensure system is not suspended */
+	queue_work(system_freezable_wq, &rproc->crash_handler);
 }
 EXPORT_SYMBOL(rproc_report_crash);
 
diff --git a/drivers/remoteproc/remoteproc_elf_helpers.h b/drivers/remoteproc/remoteproc_elf_helpers.h
index 26404e68e17a..e6de53a5000c 100644
--- a/drivers/remoteproc/remoteproc_elf_helpers.h
+++ b/drivers/remoteproc/remoteproc_elf_helpers.h
@@ -15,7 +15,7 @@
  * fw_elf_get_class - Get elf class
  * @fw: the ELF firmware image
  *
- * Note that we use and elf32_hdr to access the class since the start of the
+ * Note that we use elf32_hdr to access the class since the start of the
  * struct is the same for both elf class
  *
  * Return: elf class of the firmware
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig
index 12153d5801ce..e1bc5214494e 100644
--- a/drivers/rtc/Kconfig
+++ b/drivers/rtc/Kconfig
@@ -75,6 +75,15 @@ config RTC_DEBUG
 	  Say yes here to enable debugging support in the RTC framework
 	  and individual RTC drivers.
 
+config RTC_LIB_KUNIT_TEST
+	tristate "KUnit test for RTC lib functions" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
+	help
+	  Enable this option to test RTC library functions.
+
+	  If unsure, say N.
+
 config RTC_NVMEM
 	bool "RTC non volatile storage support"
 	select NVMEM
@@ -624,6 +633,7 @@ config RTC_DRV_FM3130
 
 config RTC_DRV_RX8010
 	tristate "Epson RX8010SJ"
+	select REGMAP_I2C
 	help
 	  If you say yes here you get support for the Epson RX8010SJ RTC
 	  chip.
diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile
index 2dd0dd956b0e..5ceeafe4d5b2 100644
--- a/drivers/rtc/Makefile
+++ b/drivers/rtc/Makefile
@@ -15,6 +15,8 @@ rtc-core-$(CONFIG_RTC_INTF_DEV)		+= dev.o
 rtc-core-$(CONFIG_RTC_INTF_PROC)	+= proc.o
 rtc-core-$(CONFIG_RTC_INTF_SYSFS)	+= sysfs.o
 
+obj-$(CONFIG_RTC_LIB_KUNIT_TEST)	+= lib_test.o
+
 # Keep the list ordered.
 
 obj-$(CONFIG_RTC_DRV_88PM80X)	+= rtc-88pm80x.o
diff --git a/drivers/rtc/lib.c b/drivers/rtc/lib.c
index 23284580df97..fe361652727a 100644
--- a/drivers/rtc/lib.c
+++ b/drivers/rtc/lib.c
@@ -6,6 +6,8 @@
  * Author: Alessandro Zummo <a.zummo@towertech.it>
  *
  * based on arch/arm/common/rtctime.c and other bits
+ *
+ * Author: Cassio Neri <cassio.neri@gmail.com> (rtc_time64_to_tm)
  */
 
 #include <linux/export.h>
@@ -22,8 +24,6 @@ static const unsigned short rtc_ydays[2][13] = {
 	{ 0, 31, 60, 91, 121, 152, 182, 213, 244, 274, 305, 335, 366 }
 };
 
-#define LEAPS_THRU_END_OF(y) ((y) / 4 - (y) / 100 + (y) / 400)
-
 /*
  * The number of days in the month.
  */
@@ -42,42 +42,95 @@ int rtc_year_days(unsigned int day, unsigned int month, unsigned int year)
 }
 EXPORT_SYMBOL(rtc_year_days);
 
-/*
- * rtc_time64_to_tm - Converts time64_t to rtc_time.
- * Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
+/**
+ * rtc_time64_to_tm - converts time64_t to rtc_time.
+ *
+ * @time:	The number of seconds since 01-01-1970 00:00:00.
+ *		(Must be positive.)
+ * @tm:		Pointer to the struct rtc_time.
  */
 void rtc_time64_to_tm(time64_t time, struct rtc_time *tm)
 {
-	unsigned int month, year, secs;
+	unsigned int secs;
 	int days;
 
+	u64 u64tmp;
+	u32 u32tmp, udays, century, day_of_century, year_of_century, year,
+		day_of_year, month, day;
+	bool is_Jan_or_Feb, is_leap_year;
+
 	/* time must be positive */
 	days = div_s64_rem(time, 86400, &secs);
 
 	/* day of the week, 1970-01-01 was a Thursday */
 	tm->tm_wday = (days + 4) % 7;
 
-	year = 1970 + days / 365;
-	days -= (year - 1970) * 365
-		+ LEAPS_THRU_END_OF(year - 1)
-		- LEAPS_THRU_END_OF(1970 - 1);
-	while (days < 0) {
-		year -= 1;
-		days += 365 + is_leap_year(year);
-	}
-	tm->tm_year = year - 1900;
-	tm->tm_yday = days + 1;
-
-	for (month = 0; month < 11; month++) {
-		int newdays;
-
-		newdays = days - rtc_month_days(month, year);
-		if (newdays < 0)
-			break;
-		days = newdays;
-	}
-	tm->tm_mon = month;
-	tm->tm_mday = days + 1;
+	/*
+	 * The following algorithm is, basically, Proposition 6.3 of Neri
+	 * and Schneider [1]. In a few words: it works on the computational
+	 * (fictitious) calendar where the year starts in March, month = 2
+	 * (*), and finishes in February, month = 13. This calendar is
+	 * mathematically convenient because the day of the year does not
+	 * depend on whether the year is leap or not. For instance:
+	 *
+	 * March 1st		0-th day of the year;
+	 * ...
+	 * April 1st		31-st day of the year;
+	 * ...
+	 * January 1st		306-th day of the year; (Important!)
+	 * ...
+	 * February 28th	364-th day of the year;
+	 * February 29th	365-th day of the year (if it exists).
+	 *
+	 * After having worked out the date in the computational calendar
+	 * (using just arithmetics) it's easy to convert it to the
+	 * corresponding date in the Gregorian calendar.
+	 *
+	 * [1] "Euclidean Affine Functions and Applications to Calendar
+	 * Algorithms". https://arxiv.org/abs/2102.06959
+	 *
+	 * (*) The numbering of months follows rtc_time more closely and
+	 * thus, is slightly different from [1].
+	 */
+
+	udays		= ((u32) days) + 719468;
+
+	u32tmp		= 4 * udays + 3;
+	century		= u32tmp / 146097;
+	day_of_century	= u32tmp % 146097 / 4;
+
+	u32tmp		= 4 * day_of_century + 3;
+	u64tmp		= 2939745ULL * u32tmp;
+	year_of_century	= upper_32_bits(u64tmp);
+	day_of_year	= lower_32_bits(u64tmp) / 2939745 / 4;
+
+	year		= 100 * century + year_of_century;
+	is_leap_year	= year_of_century != 0 ?
+		year_of_century % 4 == 0 : century % 4 == 0;
+
+	u32tmp		= 2141 * day_of_year + 132377;
+	month		= u32tmp >> 16;
+	day		= ((u16) u32tmp) / 2141;
+
+	/*
+	 * Recall that January 01 is the 306-th day of the year in the
+	 * computational (not Gregorian) calendar.
+	 */
+	is_Jan_or_Feb	= day_of_year >= 306;
+
+	/* Converts to the Gregorian calendar. */
+	year		= year + is_Jan_or_Feb;
+	month		= is_Jan_or_Feb ? month - 12 : month;
+	day		= day + 1;
+
+	day_of_year	= is_Jan_or_Feb ?
+		day_of_year - 306 : day_of_year + 31 + 28 + is_leap_year;
+
+	/* Converts to rtc_time's format. */
+	tm->tm_year	= (int) (year - 1900);
+	tm->tm_mon	= (int) month;
+	tm->tm_mday	= (int) day;
+	tm->tm_yday	= (int) day_of_year + 1;
 
 	tm->tm_hour = secs / 3600;
 	secs -= tm->tm_hour * 3600;
diff --git a/drivers/rtc/lib_test.c b/drivers/rtc/lib_test.c
new file mode 100644
index 000000000000..d5caf36c56cd
--- /dev/null
+++ b/drivers/rtc/lib_test.c
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: LGPL-2.1+
+
+#include <kunit/test.h>
+#include <linux/rtc.h>
+
+/*
+ * Advance a date by one day.
+ */
+static void advance_date(int *year, int *month, int *mday, int *yday)
+{
+	if (*mday != rtc_month_days(*month - 1, *year)) {
+		++*mday;
+		++*yday;
+		return;
+	}
+
+	*mday = 1;
+	if (*month != 12) {
+		++*month;
+		++*yday;
+		return;
+	}
+
+	*month = 1;
+	*yday  = 1;
+	++*year;
+}
+
+/*
+ * Checks every day in a 160000 years interval starting on 1970-01-01
+ * against the expected result.
+ */
+static void rtc_time64_to_tm_test_date_range(struct kunit *test)
+{
+	/*
+	 * 160000 years	= (160000 / 400) * 400 years
+	 *		= (160000 / 400) * 146097 days
+	 *		= (160000 / 400) * 146097 * 86400 seconds
+	 */
+	time64_t total_secs = ((time64_t) 160000) / 400 * 146097 * 86400;
+
+	int year	= 1970;
+	int month	= 1;
+	int mday	= 1;
+	int yday	= 1;
+
+	struct rtc_time result;
+	time64_t secs;
+	s64 days;
+
+	for (secs = 0; secs <= total_secs; secs += 86400) {
+
+		rtc_time64_to_tm(secs, &result);
+
+		days = div_s64(secs, 86400);
+
+		#define FAIL_MSG "%d/%02d/%02d (%2d) : %ld", \
+			year, month, mday, yday, days
+
+		KUNIT_ASSERT_EQ_MSG(test, year - 1900, result.tm_year, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, month - 1, result.tm_mon, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, mday, result.tm_mday, FAIL_MSG);
+		KUNIT_ASSERT_EQ_MSG(test, yday, result.tm_yday, FAIL_MSG);
+
+		advance_date(&year, &month, &mday, &yday);
+	}
+}
+
+static struct kunit_case rtc_lib_test_cases[] = {
+	KUNIT_CASE(rtc_time64_to_tm_test_date_range),
+	{}
+};
+
+static struct kunit_suite rtc_lib_test_suite = {
+	.name = "rtc_lib_test_cases",
+	.test_cases = rtc_lib_test_cases,
+};
+
+kunit_test_suite(rtc_lib_test_suite);
+
+MODULE_LICENSE("GPL");
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 670fd8a2970e..eb15067a605e 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -229,19 +229,13 @@ static int cmos_read_time(struct device *dev, struct rtc_time *t)
 	if (!pm_trace_rtc_valid())
 		return -EIO;
 
-	/* REVISIT:  if the clock has a "century" register, use
-	 * that instead of the heuristic in mc146818_get_time().
-	 * That'll make Y3K compatility (year > 2070) easy!
-	 */
 	mc146818_get_time(t);
 	return 0;
 }
 
 static int cmos_set_time(struct device *dev, struct rtc_time *t)
 {
-	/* REVISIT:  set the "century" register if available
-	 *
-	 * NOTE: this ignores the issue whereby updating the seconds
+	/* NOTE: this ignores the issue whereby updating the seconds
 	 * takes effect exactly 500ms after we write the register.
 	 * (Also queueing and other delays before we get this far.)
 	 */
diff --git a/drivers/rtc/rtc-rx8025.c b/drivers/rtc/rtc-rx8025.c
index c914091819ba..d38aaf08108c 100644
--- a/drivers/rtc/rtc-rx8025.c
+++ b/drivers/rtc/rtc-rx8025.c
@@ -60,14 +60,23 @@
 #define RX8025_ADJ_DATA_MAX	62
 #define RX8025_ADJ_DATA_MIN	-62
 
+enum rx_model {
+	model_rx_unknown,
+	model_rx_8025,
+	model_rx_8035,
+	model_last
+};
+
 static const struct i2c_device_id rx8025_id[] = {
-	{ "rx8025", 0 },
+	{ "rx8025", model_rx_8025 },
+	{ "rx8035", model_rx_8035 },
 	{ }
 };
 MODULE_DEVICE_TABLE(i2c, rx8025_id);
 
 struct rx8025_data {
 	struct rtc_device *rtc;
+	enum rx_model model;
 	u8 ctrl1;
 };
 
@@ -100,10 +109,26 @@ static s32 rx8025_write_regs(const struct i2c_client *client,
 					      length, values);
 }
 
+static int rx8025_is_osc_stopped(enum rx_model model, int ctrl2)
+{
+	int xstp = ctrl2 & RX8025_BIT_CTRL2_XST;
+	/* XSTP bit has different polarity on RX-8025 vs RX-8035.
+	 * RX-8025: 0 == oscillator stopped
+	 * RX-8035: 1 == oscillator stopped
+	 */
+
+	if (model == model_rx_8025)
+		xstp = !xstp;
+
+	return xstp;
+}
+
 static int rx8025_check_validity(struct device *dev)
 {
 	struct i2c_client *client = to_i2c_client(dev);
+	struct rx8025_data *drvdata = dev_get_drvdata(dev);
 	int ctrl2;
+	int xstp;
 
 	ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (ctrl2 < 0)
@@ -117,7 +142,8 @@ static int rx8025_check_validity(struct device *dev)
 		return -EINVAL;
 	}
 
-	if (!(ctrl2 & RX8025_BIT_CTRL2_XST)) {
+	xstp = rx8025_is_osc_stopped(drvdata->model, ctrl2);
+	if (xstp) {
 		dev_warn(dev, "crystal stopped, date is invalid\n");
 		return -EINVAL;
 	}
@@ -127,6 +153,7 @@ static int rx8025_check_validity(struct device *dev)
 
 static int rx8025_reset_validity(struct i2c_client *client)
 {
+	struct rx8025_data *drvdata = i2c_get_clientdata(client);
 	int ctrl2 = rx8025_read_reg(client, RX8025_REG_CTRL2);
 
 	if (ctrl2 < 0)
@@ -134,22 +161,28 @@ static int rx8025_reset_validity(struct i2c_client *client)
 
 	ctrl2 &= ~(RX8025_BIT_CTRL2_PON | RX8025_BIT_CTRL2_VDET);
 
+	if (drvdata->model == model_rx_8025)
+		ctrl2 |= RX8025_BIT_CTRL2_XST;
+	else
+		ctrl2 &= ~(RX8025_BIT_CTRL2_XST);
+
 	return rx8025_write_reg(client, RX8025_REG_CTRL2,
-				ctrl2 | RX8025_BIT_CTRL2_XST);
+				ctrl2);
 }
 
 static irqreturn_t rx8025_handle_irq(int irq, void *dev_id)
 {
 	struct i2c_client *client = dev_id;
 	struct rx8025_data *rx8025 = i2c_get_clientdata(client);
-	int status;
+	int status, xstp;
 
 	rtc_lock(rx8025->rtc);
 	status = rx8025_read_reg(client, RX8025_REG_CTRL2);
 	if (status < 0)
 		goto out;
 
-	if (!(status & RX8025_BIT_CTRL2_XST))
+	xstp = rx8025_is_osc_stopped(rx8025->model, status);
+	if (xstp)
 		dev_warn(&client->dev, "Oscillation stop was detected,"
 			 "you may have to readjust the clock\n");
 
@@ -519,6 +552,9 @@ static int rx8025_probe(struct i2c_client *client,
 
 	i2c_set_clientdata(client, rx8025);
 
+	if (id)
+		rx8025->model = id->driver_data;
+
 	err = rx8025_init_client(client);
 	if (err)
 		return err;
diff --git a/drivers/rtc/rtc-s5m.c b/drivers/rtc/rtc-s5m.c
index 6b56f8eacba6..fb9c6b709e13 100644
--- a/drivers/rtc/rtc-s5m.c
+++ b/drivers/rtc/rtc-s5m.c
@@ -204,15 +204,9 @@ static int s5m8767_tm_to_data(struct rtc_time *tm, u8 *data)
 	data[RTC_WEEKDAY] = 1 << tm->tm_wday;
 	data[RTC_DATE] = tm->tm_mday;
 	data[RTC_MONTH] = tm->tm_mon + 1;
-	data[RTC_YEAR1] = tm->tm_year > 100 ? (tm->tm_year - 100) : 0;
+	data[RTC_YEAR1] = tm->tm_year - 100;
 
-	if (tm->tm_year < 100) {
-		pr_err("RTC cannot handle the year %d\n",
-		       1900 + tm->tm_year);
-		return -EINVAL;
-	} else {
-		return 0;
-	}
+	return 0;
 }
 
 /*
@@ -786,29 +780,35 @@ static int s5m_rtc_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	device_init_wakeup(&pdev->dev, 1);
-
-	info->rtc_dev = devm_rtc_device_register(&pdev->dev, "s5m-rtc",
-						 &s5m_rtc_ops, THIS_MODULE);
-
+	info->rtc_dev = devm_rtc_allocate_device(&pdev->dev);
 	if (IS_ERR(info->rtc_dev))
 		return PTR_ERR(info->rtc_dev);
 
-	if (!info->irq) {
-		dev_info(&pdev->dev, "Alarm IRQ not available\n");
-		return 0;
+	info->rtc_dev->ops = &s5m_rtc_ops;
+
+	if (info->device_type == S5M8763X) {
+		info->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_0000;
+		info->rtc_dev->range_max = RTC_TIMESTAMP_END_9999;
+	} else {
+		info->rtc_dev->range_min = RTC_TIMESTAMP_BEGIN_2000;
+		info->rtc_dev->range_max = RTC_TIMESTAMP_END_2099;
 	}
 
-	ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
-					s5m_rtc_alarm_irq, 0, "rtc-alarm0",
-					info);
-	if (ret < 0) {
-		dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
-			info->irq, ret);
-		return ret;
+	if (!info->irq) {
+		clear_bit(RTC_FEATURE_ALARM, info->rtc_dev->features);
+	} else {
+		ret = devm_request_threaded_irq(&pdev->dev, info->irq, NULL,
+						s5m_rtc_alarm_irq, 0, "rtc-alarm0",
+						info);
+		if (ret < 0) {
+			dev_err(&pdev->dev, "Failed to request alarm IRQ: %d: %d\n",
+				info->irq, ret);
+			return ret;
+		}
+		device_init_wakeup(&pdev->dev, 1);
 	}
 
-	return 0;
+	return devm_rtc_register_device(info->rtc_dev);
 }
 
 #ifdef CONFIG_PM_SLEEP
diff --git a/drivers/rtc/rtc-tps65910.c b/drivers/rtc/rtc-tps65910.c
index bc89c62ccb9b..75e4c2d777b9 100644
--- a/drivers/rtc/rtc-tps65910.c
+++ b/drivers/rtc/rtc-tps65910.c
@@ -467,6 +467,6 @@ static struct platform_driver tps65910_rtc_driver = {
 };
 
 module_platform_driver(tps65910_rtc_driver);
-MODULE_ALIAS("platform:rtc-tps65910");
+MODULE_ALIAS("platform:tps65910-rtc");
 MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
 MODULE_LICENSE("GPL");
diff --git a/drivers/s390/block/Kconfig b/drivers/s390/block/Kconfig
index 376f1efbbb86..d0416dbd0cd8 100644
--- a/drivers/s390/block/Kconfig
+++ b/drivers/s390/block/Kconfig
@@ -2,17 +2,6 @@
 comment "S/390 block device drivers"
 	depends on S390 && BLOCK
 
-config BLK_DEV_XPRAM
-	def_tristate m
-	prompt "XPRAM disk support"
-	depends on S390 && BLOCK
-	help
-	  Select this option if you want to use your expanded storage on S/390
-	  or zSeries as a disk.  This is useful as a _fast_ swap device if you
-	  want to access more than 2G of memory when running in 31 bit mode.
-	  This option is also available as a module which will be called
-	  xpram.  If unsure, say "N".
-
 config DCSSBLK
 	def_tristate m
 	select FS_DAX_LIMITED
diff --git a/drivers/s390/block/Makefile b/drivers/s390/block/Makefile
index 60c85cff556f..a0a54d2f063f 100644
--- a/drivers/s390/block/Makefile
+++ b/drivers/s390/block/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_DASD) += dasd_mod.o
 obj-$(CONFIG_DASD_DIAG) += dasd_diag_mod.o
 obj-$(CONFIG_DASD_ECKD) += dasd_eckd_mod.o
 obj-$(CONFIG_DASD_FBA)  += dasd_fba_mod.o
-obj-$(CONFIG_BLK_DEV_XPRAM) += xpram.o
 obj-$(CONFIG_DCSSBLK) += dcssblk.o
 
 scm_block-objs := scm_drv.o scm_blk.o
diff --git a/drivers/s390/block/xpram.c b/drivers/s390/block/xpram.c
deleted file mode 100644
index ce98fab4d43c..000000000000
--- a/drivers/s390/block/xpram.c
+++ /dev/null
@@ -1,416 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Xpram.c -- the S/390 expanded memory RAM-disk
- *           
- * significant parts of this code are based on
- * the sbull device driver presented in
- * A. Rubini: Linux Device Drivers
- *
- * Author of XPRAM specific coding: Reinhard Buendgen
- *                                  buendgen@de.ibm.com
- * Rewrite for 2.5: Martin Schwidefsky <schwidefsky@de.ibm.com>
- *
- * External interfaces:
- *   Interfaces to linux kernel
- *        xpram_setup: read kernel parameters
- *   Device specific file operations
- *        xpram_iotcl
- *        xpram_open
- *
- * "ad-hoc" partitioning:
- *    the expanded memory can be partitioned among several devices 
- *    (with different minors). The partitioning set up can be
- *    set by kernel or module parameters (int devs & int sizes[])
- *
- * Potential future improvements:
- *   generic hard disk support to replace ad-hoc partitioning
- */
-
-#define KMSG_COMPONENT "xpram"
-#define pr_fmt(fmt) KMSG_COMPONENT ": " fmt
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/ctype.h>  /* isdigit, isxdigit */
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/blkdev.h>
-#include <linux/blkpg.h>
-#include <linux/hdreg.h>  /* HDIO_GETGEO */
-#include <linux/device.h>
-#include <linux/bio.h>
-#include <linux/gfp.h>
-#include <linux/uaccess.h>
-
-#define XPRAM_NAME	"xpram"
-#define XPRAM_DEVS	1	/* one partition */
-#define XPRAM_MAX_DEVS	32	/* maximal number of devices (partitions) */
-
-typedef struct {
-	unsigned int	size;		/* size of xpram segment in pages */
-	unsigned int	offset;		/* start page of xpram segment */
-} xpram_device_t;
-
-static xpram_device_t xpram_devices[XPRAM_MAX_DEVS];
-static unsigned int xpram_sizes[XPRAM_MAX_DEVS];
-static struct gendisk *xpram_disks[XPRAM_MAX_DEVS];
-static unsigned int xpram_pages;
-static int xpram_devs;
-
-/*
- * Parameter parsing functions.
- */
-static int devs = XPRAM_DEVS;
-static char *sizes[XPRAM_MAX_DEVS];
-
-module_param(devs, int, 0);
-module_param_array(sizes, charp, NULL, 0);
-
-MODULE_PARM_DESC(devs, "number of devices (\"partitions\"), " \
-		 "the default is " __MODULE_STRING(XPRAM_DEVS) "\n");
-MODULE_PARM_DESC(sizes, "list of device (partition) sizes " \
-		 "the defaults are 0s \n" \
-		 "All devices with size 0 equally partition the "
-		 "remaining space on the expanded strorage not "
-		 "claimed by explicit sizes\n");
-MODULE_LICENSE("GPL");
-
-/*
- * Copy expanded memory page (4kB) into main memory                  
- * Arguments                                                         
- *           page_addr:    address of target page                    
- *           xpage_index:  index of expandeded memory page           
- * Return value                                                      
- *           0:            if operation succeeds
- *           -EIO:         if pgin failed
- *           -ENXIO:       if xpram has vanished
- */
-static int xpram_page_in (unsigned long page_addr, unsigned int xpage_index)
-{
-	int cc = 2;	/* return unused cc 2 if pgin traps */
-
-	asm volatile(
-		"	.insn	rre,0xb22e0000,%1,%2\n"  /* pgin %1,%2 */
-		"0:	ipm	%0\n"
-		"	srl	%0,28\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (cc) : "a" (__pa(page_addr)), "d" (xpage_index) : "cc");
-	if (cc == 3)
-		return -ENXIO;
-	if (cc == 2)
-		return -ENXIO;
-	if (cc == 1)
-		return -EIO;
-	return 0;
-}
-
-/*
- * Copy a 4kB page of main memory to an expanded memory page          
- * Arguments                                                          
- *           page_addr:    address of source page                     
- *           xpage_index:  index of expandeded memory page            
- * Return value                                                       
- *           0:            if operation succeeds
- *           -EIO:         if pgout failed
- *           -ENXIO:       if xpram has vanished
- */
-static long xpram_page_out (unsigned long page_addr, unsigned int xpage_index)
-{
-	int cc = 2;	/* return unused cc 2 if pgin traps */
-
-	asm volatile(
-		"	.insn	rre,0xb22f0000,%1,%2\n"  /* pgout %1,%2 */
-		"0:	ipm	%0\n"
-		"	srl	%0,28\n"
-		"1:\n"
-		EX_TABLE(0b,1b)
-		: "+d" (cc) : "a" (__pa(page_addr)), "d" (xpage_index) : "cc");
-	if (cc == 3)
-		return -ENXIO;
-	if (cc == 2)
-		return -ENXIO;
-	if (cc == 1)
-		return -EIO;
-	return 0;
-}
-
-/*
- * Check if xpram is available.
- */
-static int __init xpram_present(void)
-{
-	unsigned long mem_page;
-	int rc;
-
-	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
-	if (!mem_page)
-		return -ENOMEM;
-	rc = xpram_page_in(mem_page, 0);
-	free_page(mem_page);
-	return rc ? -ENXIO : 0;
-}
-
-/*
- * Return index of the last available xpram page.
- */
-static unsigned long __init xpram_highest_page_index(void)
-{
-	unsigned int page_index, add_bit;
-	unsigned long mem_page;
-
-	mem_page = (unsigned long) __get_free_page(GFP_KERNEL);
-	if (!mem_page)
-		return 0;
-
-	page_index = 0;
-	add_bit = 1ULL << (sizeof(unsigned int)*8 - 1);
-	while (add_bit > 0) {
-		if (xpram_page_in(mem_page, page_index | add_bit) == 0)
-			page_index |= add_bit;
-		add_bit >>= 1;
-	}
-
-	free_page (mem_page);
-
-	return page_index;
-}
-
-/*
- * Block device make request function.
- */
-static blk_qc_t xpram_submit_bio(struct bio *bio)
-{
-	xpram_device_t *xdev = bio->bi_bdev->bd_disk->private_data;
-	struct bio_vec bvec;
-	struct bvec_iter iter;
-	unsigned int index;
-	unsigned long page_addr;
-	unsigned long bytes;
-
-	blk_queue_split(&bio);
-
-	if ((bio->bi_iter.bi_sector & 7) != 0 ||
-	    (bio->bi_iter.bi_size & 4095) != 0)
-		/* Request is not page-aligned. */
-		goto fail;
-	if ((bio->bi_iter.bi_size >> 12) > xdev->size)
-		/* Request size is no page-aligned. */
-		goto fail;
-	if ((bio->bi_iter.bi_sector >> 3) > 0xffffffffU - xdev->offset)
-		goto fail;
-	index = (bio->bi_iter.bi_sector >> 3) + xdev->offset;
-	bio_for_each_segment(bvec, bio, iter) {
-		page_addr = (unsigned long)
-			kmap(bvec.bv_page) + bvec.bv_offset;
-		bytes = bvec.bv_len;
-		if ((page_addr & 4095) != 0 || (bytes & 4095) != 0)
-			/* More paranoia. */
-			goto fail;
-		while (bytes > 0) {
-			if (bio_data_dir(bio) == READ) {
-				if (xpram_page_in(page_addr, index) != 0)
-					goto fail;
-			} else {
-				if (xpram_page_out(page_addr, index) != 0)
-					goto fail;
-			}
-			page_addr += 4096;
-			bytes -= 4096;
-			index++;
-		}
-	}
-	bio_endio(bio);
-	return BLK_QC_T_NONE;
-fail:
-	bio_io_error(bio);
-	return BLK_QC_T_NONE;
-}
-
-static int xpram_getgeo(struct block_device *bdev, struct hd_geometry *geo)
-{
-	unsigned long size;
-
-	/*
-	 * get geometry: we have to fake one...  trim the size to a
-	 * multiple of 64 (32k): tell we have 16 sectors, 4 heads,
-	 * whatever cylinders. Tell also that data starts at sector. 4.
-	 */
-	size = (xpram_pages * 8) & ~0x3f;
-	geo->cylinders = size >> 6;
-	geo->heads = 4;
-	geo->sectors = 16;
-	geo->start = 4;
-	return 0;
-}
-
-static const struct block_device_operations xpram_devops =
-{
-	.owner	= THIS_MODULE,
-	.submit_bio = xpram_submit_bio,
-	.getgeo	= xpram_getgeo,
-};
-
-/*
- * Setup xpram_sizes array.
- */
-static int __init xpram_setup_sizes(unsigned long pages)
-{
-	unsigned long mem_needed;
-	unsigned long mem_auto;
-	unsigned long long size;
-	char *sizes_end;
-	int mem_auto_no;
-	int i;
-
-	/* Check number of devices. */
-	if (devs <= 0 || devs > XPRAM_MAX_DEVS) {
-		pr_err("%d is not a valid number of XPRAM devices\n",devs);
-		return -EINVAL;
-	}
-	xpram_devs = devs;
-
-	/*
-	 * Copy sizes array to xpram_sizes and align partition
-	 * sizes to page boundary.
-	 */
-	mem_needed = 0;
-	mem_auto_no = 0;
-	for (i = 0; i < xpram_devs; i++) {
-		if (sizes[i]) {
-			size = simple_strtoull(sizes[i], &sizes_end, 0);
-			switch (*sizes_end) {
-			case 'g':
-			case 'G':
-				size <<= 20;
-				break;
-			case 'm':
-			case 'M':
-				size <<= 10;
-			}
-			xpram_sizes[i] = (size + 3) & -4UL;
-		}
-		if (xpram_sizes[i])
-			mem_needed += xpram_sizes[i];
-		else
-			mem_auto_no++;
-	}
-	
-	pr_info("  number of devices (partitions): %d \n", xpram_devs);
-	for (i = 0; i < xpram_devs; i++) {
-		if (xpram_sizes[i])
-			pr_info("  size of partition %d: %u kB\n",
-				i, xpram_sizes[i]);
-		else
-			pr_info("  size of partition %d to be set "
-				"automatically\n",i);
-	}
-	pr_info("  memory needed (for sized partitions): %lu kB\n",
-		mem_needed);
-	pr_info("  partitions to be sized automatically: %d\n",
-		mem_auto_no);
-
-	if (mem_needed > pages * 4) {
-		pr_err("Not enough expanded memory available\n");
-		return -EINVAL;
-	}
-
-	/*
-	 * partitioning:
-	 * xpram_sizes[i] != 0; partition i has size xpram_sizes[i] kB
-	 * else:             ; all partitions with zero xpram_sizes[i]
-	 *                     partition equally the remaining space
-	 */
-	if (mem_auto_no) {
-		mem_auto = ((pages - mem_needed / 4) / mem_auto_no) * 4;
-		pr_info("  automatically determined "
-			"partition size: %lu kB\n", mem_auto);
-		for (i = 0; i < xpram_devs; i++)
-			if (xpram_sizes[i] == 0)
-				xpram_sizes[i] = mem_auto;
-	}
-	return 0;
-}
-
-static int __init xpram_setup_blkdev(void)
-{
-	unsigned long offset;
-	int i, rc = -ENOMEM;
-
-	for (i = 0; i < xpram_devs; i++) {
-		xpram_disks[i] = blk_alloc_disk(NUMA_NO_NODE);
-		if (!xpram_disks[i])
-			goto out;
-		blk_queue_flag_set(QUEUE_FLAG_NONROT, xpram_disks[i]->queue);
-		blk_queue_flag_clear(QUEUE_FLAG_ADD_RANDOM,
-				xpram_disks[i]->queue);
-		blk_queue_logical_block_size(xpram_disks[i]->queue, 4096);
-	}
-
-	/*
-	 * Register xpram major.
-	 */
-	rc = register_blkdev(XPRAM_MAJOR, XPRAM_NAME);
-	if (rc < 0)
-		goto out;
-
-	/*
-	 * Setup device structures.
-	 */
-	offset = 0;
-	for (i = 0; i < xpram_devs; i++) {
-		struct gendisk *disk = xpram_disks[i];
-
-		xpram_devices[i].size = xpram_sizes[i] / 4;
-		xpram_devices[i].offset = offset;
-		offset += xpram_devices[i].size;
-		disk->major = XPRAM_MAJOR;
-		disk->first_minor = i;
-		disk->minors = 1;
-		disk->fops = &xpram_devops;
-		disk->private_data = &xpram_devices[i];
-		sprintf(disk->disk_name, "slram%d", i);
-		set_capacity(disk, xpram_sizes[i] << 1);
-		add_disk(disk);
-	}
-
-	return 0;
-out:
-	while (i--)
-		blk_cleanup_disk(xpram_disks[i]);
-	return rc;
-}
-
-/*
- * Finally, the init/exit functions.
- */
-static void __exit xpram_exit(void)
-{
-	int i;
-	for (i = 0; i < xpram_devs; i++) {
-		del_gendisk(xpram_disks[i]);
-		blk_cleanup_disk(xpram_disks[i]);
-	}
-	unregister_blkdev(XPRAM_MAJOR, XPRAM_NAME);
-}
-
-static int __init xpram_init(void)
-{
-	int rc;
-
-	/* Find out size of expanded memory. */
-	if (xpram_present() != 0) {
-		pr_err("No expanded memory available\n");
-		return -ENODEV;
-	}
-	xpram_pages = xpram_highest_page_index() + 1;
-	pr_info("  %u pages expanded memory found (%lu KB).\n",
-		xpram_pages, (unsigned long) xpram_pages*4);
-	rc = xpram_setup_sizes(xpram_pages);
-	if (rc)
-		return rc;
-	return xpram_setup_blkdev();
-}
-
-module_init(xpram_init);
-module_exit(xpram_exit);
diff --git a/drivers/s390/char/con3270.c b/drivers/s390/char/con3270.c
index 87cdbace1453..e4592890f20a 100644
--- a/drivers/s390/char/con3270.c
+++ b/drivers/s390/char/con3270.c
@@ -292,13 +292,15 @@ con3270_update(struct timer_list *t)
  * Read tasklet.
  */
 static void
-con3270_read_tasklet(struct raw3270_request *rrq)
+con3270_read_tasklet(unsigned long data)
 {
 	static char kreset_data = TW_KR;
+	struct raw3270_request *rrq;
 	struct con3270 *cp;
 	unsigned long flags;
 	int nr_up, deactivate;
 
+	rrq = (struct raw3270_request *)data;
 	cp = (struct con3270 *) rrq->view;
 	spin_lock_irqsave(&cp->view.lock, flags);
 	nr_up = cp->nr_up;
@@ -625,8 +627,7 @@ con3270_init(void)
 	INIT_LIST_HEAD(&condev->lines);
 	INIT_LIST_HEAD(&condev->update);
 	timer_setup(&condev->timer, con3270_update, 0);
-	tasklet_init(&condev->readlet, 
-		     (void (*)(unsigned long)) con3270_read_tasklet,
+	tasklet_init(&condev->readlet, con3270_read_tasklet,
 		     (unsigned long) condev->read);
 
 	raw3270_add_view(&condev->view, &con3270_fn, 1, RAW3270_VIEW_LOCK_IRQ);
diff --git a/drivers/s390/char/ctrlchar.c b/drivers/s390/char/ctrlchar.c
index e1686a69a68e..6f2b64040078 100644
--- a/drivers/s390/char/ctrlchar.c
+++ b/drivers/s390/char/ctrlchar.c
@@ -34,12 +34,13 @@ void schedule_sysrq_work(struct sysrq_work *sw)
 
 
 /**
- * Check for special chars at start of input.
+ * ctrlchar_handle - check for special chars at start of input
  *
- * @param buf Console input buffer.
- * @param len Length of valid data in buffer.
- * @param tty The tty struct for this console.
- * @return CTRLCHAR_NONE, if nothing matched,
+ * @buf: console input buffer
+ * @len: length of valid data in buffer
+ * @tty: the tty struct for this console
+ *
+ * Return: CTRLCHAR_NONE, if nothing matched,
  *         CTRLCHAR_SYSRQ, if sysrq was encountered
  *         otherwise char to be inserted logically or'ed
  *         with CTRLCHAR_CTRL
diff --git a/drivers/s390/char/hmcdrv_ftp.c b/drivers/s390/char/hmcdrv_ftp.c
index 37ee8f698c3b..02b6f394aec2 100644
--- a/drivers/s390/char/hmcdrv_ftp.c
+++ b/drivers/s390/char/hmcdrv_ftp.c
@@ -26,7 +26,7 @@
  * struct hmcdrv_ftp_ops - HMC drive FTP operations
  * @startup: startup function
  * @shutdown: shutdown function
- * @cmd: FTP transfer function
+ * @transfer: FTP transfer function
  */
 struct hmcdrv_ftp_ops {
 	int (*startup)(void);
diff --git a/drivers/s390/char/sclp.c b/drivers/s390/char/sclp.c
index b4b84e3e0949..2cf7fe131ece 100644
--- a/drivers/s390/char/sclp.c
+++ b/drivers/s390/char/sclp.c
@@ -28,7 +28,7 @@
 #define SCLP_HEADER		"sclp: "
 
 struct sclp_trace_entry {
-	char id[4];
+	char id[4] __nonstring;
 	u32 a;
 	u64 b;
 };
diff --git a/drivers/s390/cio/blacklist.c b/drivers/s390/cio/blacklist.c
index 4dd2eb634856..f3c656975e05 100644
--- a/drivers/s390/cio/blacklist.c
+++ b/drivers/s390/cio/blacklist.c
@@ -262,7 +262,10 @@ static int blacklist_parse_proc_parameters(char *buf)
 
 	if (strcmp("free", parm) == 0) {
 		rc = blacklist_parse_parameters(buf, free, 0);
-		css_schedule_eval_all_unreg(0);
+		/* There could be subchannels without proper devices connected.
+		 * evaluate all the entries
+		 */
+		css_schedule_eval_all();
 	} else if (strcmp("add", parm) == 0)
 		rc = blacklist_parse_parameters(buf, add, 0);
 	else if (strcmp("purge", parm) == 0)
diff --git a/drivers/s390/cio/device.c b/drivers/s390/cio/device.c
index adf33b653d87..8d14569823d7 100644
--- a/drivers/s390/cio/device.c
+++ b/drivers/s390/cio/device.c
@@ -867,19 +867,6 @@ out_err:
 		wake_up(&ccw_device_init_wq);
 }
 
-static void ccw_device_call_sch_unregister(struct ccw_device *cdev)
-{
-	struct subchannel *sch;
-
-	/* Get subchannel reference for local processing. */
-	if (!get_device(cdev->dev.parent))
-		return;
-	sch = to_subchannel(cdev->dev.parent);
-	css_sch_device_unregister(sch);
-	/* Release subchannel reference for local processing. */
-	put_device(&sch->dev);
-}
-
 /*
  * subchannel recognition done. Called from the state machine.
  */
@@ -1857,10 +1844,10 @@ static void ccw_device_todo(struct work_struct *work)
 			css_schedule_eval(sch->schid);
 		fallthrough;
 	case CDEV_TODO_UNREG:
-		if (sch_is_pseudo_sch(sch))
-			ccw_device_unregister(cdev);
-		else
-			ccw_device_call_sch_unregister(cdev);
+		spin_lock_irq(sch->lock);
+		sch_set_cdev(sch, NULL);
+		spin_unlock_irq(sch->lock);
+		ccw_device_unregister(cdev);
 		break;
 	default:
 		break;
diff --git a/drivers/s390/cio/device_id.c b/drivers/s390/cio/device_id.c
index 740996d0dc8c..7835a87a60b5 100644
--- a/drivers/s390/cio/device_id.c
+++ b/drivers/s390/cio/device_id.c
@@ -91,7 +91,7 @@ static int diag210_to_senseid(struct senseid *senseid, struct diag210 *diag)
 }
 
 /**
- * diag_get_dev_info - retrieve device information via diag 0x210
+ * diag210_get_dev_info - retrieve device information via diag 0x210
  * @cdev: ccw device
  *
  * Returns zero on success, non-zero otherwise.
diff --git a/drivers/s390/crypto/zcrypt_api.c b/drivers/s390/crypto/zcrypt_api.c
index fa0cb8633040..356318746dd1 100644
--- a/drivers/s390/crypto/zcrypt_api.c
+++ b/drivers/s390/crypto/zcrypt_api.c
@@ -71,7 +71,7 @@ static LIST_HEAD(zcrypt_ops_list);
 /* Zcrypt related debug feature stuff. */
 debug_info_t *zcrypt_dbf_info;
 
-/**
+/*
  * Process a rescan of the transport layer.
  *
  * Returns 1, if the rescan has been processed, otherwise 0.
@@ -462,7 +462,7 @@ static void zcdn_destroy_all(void)
 
 #endif
 
-/**
+/*
  * zcrypt_read (): Not supported beyond zcrypt 1.3.1.
  *
  * This function is not supported beyond zcrypt 1.3.1.
@@ -473,7 +473,7 @@ static ssize_t zcrypt_read(struct file *filp, char __user *buf,
 	return -EPERM;
 }
 
-/**
+/*
  * zcrypt_write(): Not allowed.
  *
  * Write is is not allowed
@@ -484,7 +484,7 @@ static ssize_t zcrypt_write(struct file *filp, const char __user *buf,
 	return -EPERM;
 }
 
-/**
+/*
  * zcrypt_open(): Count number of users.
  *
  * Device open function to count number of users.
@@ -512,7 +512,7 @@ static int zcrypt_open(struct inode *inode, struct file *filp)
 	return stream_open(inode, filp);
 }
 
-/**
+/*
  * zcrypt_release(): Count number of users.
  *
  * Device close function to count number of users.
@@ -2153,7 +2153,7 @@ static void zcdn_exit(void)
 
 #endif
 
-/**
+/*
  * zcrypt_api_init(): Module initialization.
  *
  * The module initialization code.
@@ -2191,7 +2191,7 @@ out:
 	return rc;
 }
 
-/**
+/*
  * zcrypt_api_exit(): Module termination.
  *
  * The module termination code.
diff --git a/drivers/s390/crypto/zcrypt_cex2a.c b/drivers/s390/crypto/zcrypt_cex2a.c
index fa8293d37006..2bd49950ba81 100644
--- a/drivers/s390/crypto/zcrypt_cex2a.c
+++ b/drivers/s390/crypto/zcrypt_cex2a.c
@@ -65,7 +65,7 @@ static struct ap_device_id zcrypt_cex2a_queue_ids[] = {
 
 MODULE_DEVICE_TABLE(ap, zcrypt_cex2a_queue_ids);
 
-/**
+/*
  * Probe function for CEX2A card devices. It always accepts the AP device
  * since the bus_match already checked the card type.
  * @ap_dev: pointer to the AP device.
@@ -124,7 +124,7 @@ static int zcrypt_cex2a_card_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX2A card driver information
  * if an AP card device is removed.
  */
@@ -142,7 +142,7 @@ static struct ap_driver zcrypt_cex2a_card_driver = {
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
 
-/**
+/*
  * Probe function for CEX2A queue devices. It always accepts the AP device
  * since the bus_match already checked the queue type.
  * @ap_dev: pointer to the AP device.
@@ -183,7 +183,7 @@ static int zcrypt_cex2a_queue_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX2A queue driver information
  * if an AP queue device is removed.
  */
diff --git a/drivers/s390/crypto/zcrypt_cex2c.c b/drivers/s390/crypto/zcrypt_cex2c.c
index a0b9f1153e12..6360fdd06160 100644
--- a/drivers/s390/crypto/zcrypt_cex2c.c
+++ b/drivers/s390/crypto/zcrypt_cex2c.c
@@ -171,7 +171,7 @@ static const struct attribute_group cca_queue_attr_grp = {
 	.attrs = cca_queue_attrs,
 };
 
-/**
+/*
  * Large random number detection function. Its sends a message to a CEX2C/CEX3C
  * card to find out if large random numbers are supported.
  * @ap_dev: pointer to the AP device.
@@ -237,7 +237,7 @@ out_free:
 	return rc;
 }
 
-/**
+/*
  * Probe function for CEX2C/CEX3C card devices. It always accepts the
  * AP device since the bus_match already checked the hardware type.
  * @ap_dev: pointer to the AP card device.
@@ -303,7 +303,7 @@ static int zcrypt_cex2c_card_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX2C/CEX3C card driver information
  * if an AP card device is removed.
  */
@@ -325,7 +325,7 @@ static struct ap_driver zcrypt_cex2c_card_driver = {
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
 
-/**
+/*
  * Probe function for CEX2C/CEX3C queue devices. It always accepts the
  * AP device since the bus_match already checked the hardware type.
  * @ap_dev: pointer to the AP card device.
@@ -376,7 +376,7 @@ static int zcrypt_cex2c_queue_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX2C/CEX3C queue driver information
  * if an AP queue device is removed.
  */
diff --git a/drivers/s390/crypto/zcrypt_cex4.c b/drivers/s390/crypto/zcrypt_cex4.c
index 1f7ec54142e1..06024bbe9a58 100644
--- a/drivers/s390/crypto/zcrypt_cex4.c
+++ b/drivers/s390/crypto/zcrypt_cex4.c
@@ -394,7 +394,7 @@ static const struct attribute_group ep11_queue_attr_grp = {
 	.attrs = ep11_queue_attrs,
 };
 
-/**
+/*
  * Probe function for CEX4/CEX5/CEX6/CEX7 card device. It always
  * accepts the AP device since the bus_match already checked
  * the hardware type.
@@ -562,7 +562,7 @@ static int zcrypt_cex4_card_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX4/CEX5/CEX6/CEX7 card driver
  * information if an AP card device is removed.
  */
@@ -586,7 +586,7 @@ static struct ap_driver zcrypt_cex4_card_driver = {
 	.flags = AP_DRIVER_FLAG_DEFAULT,
 };
 
-/**
+/*
  * Probe function for CEX4/CEX5/CEX6/CEX7 queue device. It always
  * accepts the AP device since the bus_match already checked
  * the hardware type.
@@ -652,7 +652,7 @@ static int zcrypt_cex4_queue_probe(struct ap_device *ap_dev)
 	return rc;
 }
 
-/**
+/*
  * This is called to remove the CEX4/CEX5/CEX6/CEX7 queue driver
  * information if an AP queue device is removed.
  */
diff --git a/drivers/s390/crypto/zcrypt_msgtype50.c b/drivers/s390/crypto/zcrypt_msgtype50.c
index 99405472824d..99937f3e1d49 100644
--- a/drivers/s390/crypto/zcrypt_msgtype50.c
+++ b/drivers/s390/crypto/zcrypt_msgtype50.c
@@ -39,7 +39,7 @@ MODULE_DESCRIPTION("Cryptographic Accelerator (message type 50), " \
 		   "Copyright IBM Corp. 2001, 2012");
 MODULE_LICENSE("GPL");
 
-/**
+/*
  * The type 50 message family is associated with a CEXxA cards.
  *
  * The four members of the family are described below.
@@ -136,7 +136,7 @@ struct type50_crb3_msg {
 	unsigned char	message[512];
 } __packed;
 
-/**
+/*
  * The type 80 response family is associated with a CEXxA cards.
  *
  * Note that all unsigned char arrays are right-justified and left-padded
@@ -188,7 +188,7 @@ unsigned int get_rsa_crt_fc(struct ica_rsa_modexpo_crt *crt, int *fcode)
 	return 0;
 }
 
-/**
+/*
  * Convert a ICAMEX message to a type50 MEX message.
  *
  * @zq: crypto queue pointer
@@ -255,7 +255,7 @@ static int ICAMEX_msg_to_type50MEX_msg(struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Convert a ICACRT message to a type50 CRT message.
  *
  * @zq: crypto queue pointer
@@ -346,7 +346,7 @@ static int ICACRT_msg_to_type50CRT_msg(struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Copy results from a type 80 reply message back to user space.
  *
  * @zq: crypto device pointer
@@ -418,7 +418,7 @@ static int convert_response_cex2a(struct zcrypt_queue *zq,
 	}
 }
 
-/**
+/*
  * This function is called from the AP bus code after a crypto request
  * "msg" has finished with the reply message "reply".
  * It is called from tasklet context.
@@ -457,7 +457,7 @@ out:
 
 static atomic_t zcrypt_step = ATOMIC_INIT(0);
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxA
  * device to handle a modexpo request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -502,7 +502,7 @@ out:
 	return rc;
 }
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxA
  * device to handle a modexpo_crt request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -547,7 +547,7 @@ out:
 	return rc;
 }
 
-/**
+/*
  * The crypto operations for message type 50.
  */
 static struct zcrypt_ops zcrypt_msgtype50_ops = {
diff --git a/drivers/s390/crypto/zcrypt_msgtype6.c b/drivers/s390/crypto/zcrypt_msgtype6.c
index 752c6398fcd6..bc5a8c31ba73 100644
--- a/drivers/s390/crypto/zcrypt_msgtype6.c
+++ b/drivers/s390/crypto/zcrypt_msgtype6.c
@@ -44,7 +44,7 @@ MODULE_DESCRIPTION("Cryptographic Coprocessor (message type 6), " \
 		   "Copyright IBM Corp. 2001, 2012");
 MODULE_LICENSE("GPL");
 
-/**
+/*
  * CPRB
  *	  Note that all shorts, ints and longs are little-endian.
  *	  All pointer fields are 32-bits long, and mean nothing
@@ -107,7 +107,7 @@ struct function_and_rules_block {
 	unsigned char only_rule[8];
 } __packed;
 
-/**
+/*
  * The following is used to initialize the CPRBX passed to the CEXxC/CEXxP
  * card in a type6 message. The 3 fields that must be filled in at execution
  * time are  req_parml, rpl_parml and usage_domain.
@@ -236,7 +236,7 @@ int speed_idx_ep11(int req_type)
 }
 
 
-/**
+/*
  * Convert a ICAMEX message to a type6 MEX message.
  *
  * @zq: crypto device pointer
@@ -305,7 +305,7 @@ static int ICAMEX_msg_to_type6MEX_msgX(struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Convert a ICACRT message to a type6 CRT message.
  *
  * @zq: crypto device pointer
@@ -374,7 +374,7 @@ static int ICACRT_msg_to_type6CRT_msgX(struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Convert a XCRB message to a type6 CPRB message.
  *
  * @zq: crypto device pointer
@@ -571,7 +571,7 @@ static int xcrb_msg_to_type6_ep11cprb_msgx(bool userspace, struct ap_message *ap
 	return 0;
 }
 
-/**
+/*
  * Copy results from a type 86 ICA reply message back to user space.
  *
  * @zq: crypto device pointer
@@ -697,7 +697,7 @@ static int convert_type86_ica(struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Copy results from a type 86 XCRB reply message back to user space.
  *
  * @zq: crypto device pointer
@@ -728,7 +728,7 @@ static int convert_type86_xcrb(bool userspace, struct zcrypt_queue *zq,
 	return 0;
 }
 
-/**
+/*
  * Copy results from a type 86 EP11 XCRB reply message back to user space.
  *
  * @zq: crypto device pointer
@@ -911,7 +911,7 @@ static int convert_response_rng(struct zcrypt_queue *zq,
 	}
 }
 
-/**
+/*
  * This function is called from the AP bus code after a crypto request
  * "msg" has finished with the reply message "reply".
  * It is called from tasklet context.
@@ -966,7 +966,7 @@ out:
 	complete(&(resp_type->work));
 }
 
-/**
+/*
  * This function is called from the AP bus code after a crypto request
  * "msg" has finished with the reply message "reply".
  * It is called from tasklet context.
@@ -1015,7 +1015,7 @@ out:
 
 static atomic_t zcrypt_step = ATOMIC_INIT(0);
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxC
  * device to handle a modexpo request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -1063,7 +1063,7 @@ out_free:
 	return rc;
 }
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxC
  * device to handle a modexpo_crt request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -1112,7 +1112,7 @@ out_free:
 	return rc;
 }
 
-/**
+/*
  * Fetch function code from cprb.
  * Extracting the fc requires to copy the cprb from userspace.
  * So this function allocates memory and needs an ap_msg prepared
@@ -1140,7 +1140,7 @@ unsigned int get_cprb_fc(bool userspace, struct ica_xcRB *xcRB,
 	return XCRB_msg_to_type6CPRB_msgX(userspace, ap_msg, xcRB, func_code, dom);
 }
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxC
  * device to handle a send_cprb request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -1170,7 +1170,7 @@ out:
 	return rc;
 }
 
-/**
+/*
  * Fetch function code from ep11 cprb.
  * Extracting the fc requires to copy the ep11 cprb from userspace.
  * So this function allocates memory and needs an ap_msg prepared
@@ -1198,7 +1198,7 @@ unsigned int get_ep11cprb_fc(bool userspace, struct ep11_urb *xcrb,
 	return xcrb_msg_to_type6_ep11cprb_msgx(userspace, ap_msg, xcrb, func_code);
 }
 
-/**
+/*
  * The request distributor calls this function if it picked the CEX4P
  * device to handle a send_ep11_cprb request.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -1228,7 +1228,7 @@ static long zcrypt_msgtype6_send_ep11_cprb(bool userspace, struct zcrypt_queue *
 	} __packed * payload_hdr = NULL;
 
 
-	/**
+	/*
 	 * The target domain field within the cprb body/payload block will be
 	 * replaced by the usage domain for non-management commands only.
 	 * Therefore we check the first bit of the 'flags' parameter for
@@ -1299,7 +1299,7 @@ unsigned int get_rng_fc(struct ap_message *ap_msg, int *func_code,
 	return 0;
 }
 
-/**
+/*
  * The request distributor calls this function if it picked the CEXxC
  * device to generate random data.
  * @zq: pointer to zcrypt_queue structure that identifies the
@@ -1339,7 +1339,7 @@ out:
 	return rc;
 }
 
-/**
+/*
  * The crypto operations for a CEXxC card.
  */
 static struct zcrypt_ops zcrypt_msgtype6_norng_ops = {
diff --git a/drivers/s390/scsi/zfcp_dbf.c b/drivers/s390/scsi/zfcp_dbf.c
index ca473b368905..cbc3b62cd9e5 100644
--- a/drivers/s390/scsi/zfcp_dbf.c
+++ b/drivers/s390/scsi/zfcp_dbf.c
@@ -766,7 +766,7 @@ static void zfcp_dbf_unregister(struct zfcp_dbf *dbf)
 }
 
 /**
- * zfcp_adapter_debug_register - registers debug feature for an adapter
+ * zfcp_dbf_adapter_register - registers debug feature for an adapter
  * @adapter: pointer to adapter for which debug features should be registered
  * return: -ENOMEM on error, 0 otherwise
  */
@@ -824,7 +824,7 @@ err_out:
 }
 
 /**
- * zfcp_adapter_debug_unregister - unregisters debug feature for an adapter
+ * zfcp_dbf_adapter_unregister - unregisters debug feature for an adapter
  * @adapter: pointer to adapter for which debug features should be unregistered
  */
 void zfcp_dbf_adapter_unregister(struct zfcp_adapter *adapter)
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index 6da8f6d05d39..c1f979296c1a 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -2275,7 +2275,7 @@ static void zfcp_fsf_close_lun_handler(struct zfcp_fsf_req *req)
 }
 
 /**
- * zfcp_fsf_close_LUN - close LUN
+ * zfcp_fsf_close_lun - close LUN
  * @erp_action: pointer to erp_action triggering the "close LUN"
  * Returns: 0 on success, error otherwise
  */
diff --git a/drivers/s390/scsi/zfcp_qdio.c b/drivers/s390/scsi/zfcp_qdio.c
index 8f19bed6384e..6a2720105138 100644
--- a/drivers/s390/scsi/zfcp_qdio.c
+++ b/drivers/s390/scsi/zfcp_qdio.c
@@ -384,7 +384,7 @@ free_req_q:
 }
 
 /**
- * zfcp_close_qdio - close qdio queues for an adapter
+ * zfcp_qdio_close - close qdio queues for an adapter
  * @qdio: pointer to structure zfcp_qdio
  */
 void zfcp_qdio_close(struct zfcp_qdio *qdio)
diff --git a/drivers/s390/scsi/zfcp_unit.c b/drivers/s390/scsi/zfcp_unit.c
index 59333f0257a8..60f2a04f0869 100644
--- a/drivers/s390/scsi/zfcp_unit.c
+++ b/drivers/s390/scsi/zfcp_unit.c
@@ -111,9 +111,9 @@ static void zfcp_unit_release(struct device *dev)
 }
 
 /**
- * zfcp_unit_enqueue - enqueue unit to unit list of a port.
+ * zfcp_unit_add - add unit to unit list of a port.
  * @port: pointer to port where unit is added
- * @fcp_lun: FCP LUN of unit to be enqueued
+ * @fcp_lun: FCP LUN of unit to be added
  * Returns: 0 success
  *
  * Sets up some unit internal structures and creates sysfs entry.
diff --git a/drivers/scsi/cxlflash/main.c b/drivers/scsi/cxlflash/main.c
index 2f1894588e0b..b2730e859df8 100644
--- a/drivers/scsi/cxlflash/main.c
+++ b/drivers/scsi/cxlflash/main.c
@@ -1629,8 +1629,8 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 {
 	struct device *dev = &cfg->dev->dev;
 	struct pci_dev *pdev = cfg->dev;
-	int rc = 0;
-	int ro_start, ro_size, i, j, k;
+	int i, k, rc = 0;
+	unsigned int kw_size;
 	ssize_t vpd_size;
 	char vpd_data[CXLFLASH_VPD_LEN];
 	char tmp_buf[WWPN_BUF_LEN] = { 0 };
@@ -1648,24 +1648,6 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 		goto out;
 	}
 
-	/* Get the read only section offset */
-	ro_start = pci_vpd_find_tag(vpd_data, vpd_size, PCI_VPD_LRDT_RO_DATA);
-	if (unlikely(ro_start < 0)) {
-		dev_err(dev, "%s: VPD Read-only data not found\n", __func__);
-		rc = -ENODEV;
-		goto out;
-	}
-
-	/* Get the read only section size, cap when extends beyond read VPD */
-	ro_size = pci_vpd_lrdt_size(&vpd_data[ro_start]);
-	j = ro_size;
-	i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-	if (unlikely((i + j) > vpd_size)) {
-		dev_dbg(dev, "%s: Might need to read more VPD (%d > %ld)\n",
-			__func__, (i + j), vpd_size);
-		ro_size = vpd_size - i;
-	}
-
 	/*
 	 * Find the offset of the WWPN tag within the read only
 	 * VPD data and validate the found field (partials are
@@ -1681,11 +1663,9 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 	 * ports programmed and operate in an undefined state.
 	 */
 	for (k = 0; k < cfg->num_fc_ports; k++) {
-		j = ro_size;
-		i = ro_start + PCI_VPD_LRDT_TAG_SIZE;
-
-		i = pci_vpd_find_info_keyword(vpd_data, i, j, wwpn_vpd_tags[k]);
-		if (i < 0) {
+		i = pci_vpd_find_ro_info_keyword(vpd_data, vpd_size,
+						 wwpn_vpd_tags[k], &kw_size);
+		if (i == -ENOENT) {
 			if (wwpn_vpd_required)
 				dev_err(dev, "%s: Port %d WWPN not found\n",
 					__func__, k);
@@ -1693,9 +1673,7 @@ static int read_vpd(struct cxlflash_cfg *cfg, u64 wwpn[])
 			continue;
 		}
 
-		j = pci_vpd_info_field_size(&vpd_data[i]);
-		i += PCI_VPD_INFO_FLD_HDR_SIZE;
-		if (unlikely((i + j > vpd_size) || (j != WWPN_LEN))) {
+		if (i < 0 || kw_size != WWPN_LEN) {
 			dev_err(dev, "%s: Port %d WWPN incomplete or bad VPD\n",
 				__func__, k);
 			rc = -ENODEV;
diff --git a/drivers/thermal/devfreq_cooling.c b/drivers/thermal/devfreq_cooling.c
index 5a86cffd78f6..4310cb342a9f 100644
--- a/drivers/thermal/devfreq_cooling.c
+++ b/drivers/thermal/devfreq_cooling.c
@@ -18,10 +18,10 @@
 #include <linux/pm_opp.h>
 #include <linux/pm_qos.h>
 #include <linux/thermal.h>
+#include <linux/units.h>
 
 #include <trace/events/thermal.h>
 
-#define HZ_PER_KHZ		1000
 #define SCALE_ERROR_MITIGATION	100
 
 /**
diff --git a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
index 823354a1a91a..19926beeb3b7 100644
--- a/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/intel/int340x_thermal/int3400_thermal.c
@@ -108,9 +108,12 @@ static struct attribute *imok_attr[] = {
 	NULL
 };
 
+static const struct attribute_group imok_attribute_group = {
+	.attrs = imok_attr,
+};
+
 static const struct attribute_group data_attribute_group = {
 	.bin_attrs = data_attributes,
-	.attrs = imok_attr,
 };
 
 static ssize_t available_uuids_show(struct device *dev,
@@ -522,6 +525,12 @@ static int int3400_thermal_probe(struct platform_device *pdev)
 	if (result)
 		goto free_rel_misc;
 
+	if (acpi_has_method(priv->adev->handle, "IMOK")) {
+		result = sysfs_create_group(&pdev->dev.kobj, &imok_attribute_group);
+		if (result)
+			goto free_imok;
+	}
+
 	if (priv->data_vault) {
 		result = sysfs_create_group(&pdev->dev.kobj,
 					    &data_attribute_group);
@@ -545,6 +554,8 @@ free_sysfs:
 	}
 free_uuid:
 	sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+free_imok:
+	sysfs_remove_group(&pdev->dev.kobj, &imok_attribute_group);
 free_rel_misc:
 	if (!priv->rel_misc_dev_res)
 		acpi_thermal_rel_misc_device_remove(priv->adev->handle);
@@ -573,6 +584,7 @@ static int int3400_thermal_remove(struct platform_device *pdev)
 	if (priv->data_vault)
 		sysfs_remove_group(&pdev->dev.kobj, &data_attribute_group);
 	sysfs_remove_group(&pdev->dev.kobj, &uuid_attribute_group);
+	sysfs_remove_group(&pdev->dev.kobj, &imok_attribute_group);
 	thermal_zone_device_unregister(priv->thermal);
 	kfree(priv->data_vault);
 	kfree(priv->trts);
diff --git a/drivers/thermal/intel/intel_powerclamp.c b/drivers/thermal/intel/intel_powerclamp.c
index b0eb5ece9243..a5b58ea89cc6 100644
--- a/drivers/thermal/intel/intel_powerclamp.c
+++ b/drivers/thermal/intel/intel_powerclamp.c
@@ -528,7 +528,7 @@ static int start_power_clamp(void)
 
 	set_target_ratio = clamp(set_target_ratio, 0U, MAX_TARGET_RATIO - 1);
 	/* prevent cpu hotplug */
-	get_online_cpus();
+	cpus_read_lock();
 
 	/* prefer BSP */
 	control_cpu = 0;
@@ -542,7 +542,7 @@ static int start_power_clamp(void)
 	for_each_online_cpu(cpu) {
 		start_power_clamp_worker(cpu);
 	}
-	put_online_cpus();
+	cpus_read_unlock();
 
 	return 0;
 }
diff --git a/drivers/thermal/intel/intel_tcc_cooling.c b/drivers/thermal/intel/intel_tcc_cooling.c
index 8ec10d55d421..cd80c7db4073 100644
--- a/drivers/thermal/intel/intel_tcc_cooling.c
+++ b/drivers/thermal/intel/intel_tcc_cooling.c
@@ -79,6 +79,8 @@ static const struct x86_cpu_id tcc_ids[] __initconst = {
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE, NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(TIGERLAKE_L, NULL),
 	X86_MATCH_INTEL_FAM6_MODEL(COMETLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE, NULL),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L, NULL),
 	{}
 };
 
diff --git a/drivers/thermal/qcom/Kconfig b/drivers/thermal/qcom/Kconfig
index 8d5ac2df26dc..7d942f71e532 100644
--- a/drivers/thermal/qcom/Kconfig
+++ b/drivers/thermal/qcom/Kconfig
@@ -31,3 +31,13 @@ config QCOM_SPMI_TEMP_ALARM
 	  trip points. The temperature reported by the thermal sensor reflects the
 	  real time die temperature if an ADC is present or an estimate of the
 	  temperature based upon the over temperature stage value.
+
+config QCOM_LMH
+	tristate "Qualcomm Limits Management Hardware"
+	depends on ARCH_QCOM
+	help
+	  This enables initialization of Qualcomm limits management
+	  hardware(LMh). LMh allows for hardware-enforced mitigation for cpus based on
+	  input from temperature and current sensors.  On many newer Qualcomm SoCs
+	  LMh is configured in the firmware and this feature need not be enabled.
+	  However, on certain SoCs like sdm845 LMh has to be configured from kernel.
diff --git a/drivers/thermal/qcom/Makefile b/drivers/thermal/qcom/Makefile
index 252ea7d9da0b..0fa2512042e7 100644
--- a/drivers/thermal/qcom/Makefile
+++ b/drivers/thermal/qcom/Makefile
@@ -5,3 +5,4 @@ qcom_tsens-y			+= tsens.o tsens-v2.o tsens-v1.o tsens-v0_1.o \
 				   tsens-8960.o
 obj-$(CONFIG_QCOM_SPMI_ADC_TM5)	+= qcom-spmi-adc-tm5.o
 obj-$(CONFIG_QCOM_SPMI_TEMP_ALARM)	+= qcom-spmi-temp-alarm.o
+obj-$(CONFIG_QCOM_LMH)		+= lmh.o
diff --git a/drivers/thermal/qcom/lmh.c b/drivers/thermal/qcom/lmh.c
new file mode 100644
index 000000000000..eafa7526eb8b
--- /dev/null
+++ b/drivers/thermal/qcom/lmh.c
@@ -0,0 +1,232 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Copyright (C) 2021, Linaro Limited. All rights reserved.
+ */
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/irqdomain.h>
+#include <linux/err.h>
+#include <linux/platform_device.h>
+#include <linux/of_platform.h>
+#include <linux/slab.h>
+#include <linux/qcom_scm.h>
+
+#define LMH_NODE_DCVS			0x44435653
+#define LMH_CLUSTER0_NODE_ID		0x6370302D
+#define LMH_CLUSTER1_NODE_ID		0x6370312D
+
+#define LMH_SUB_FN_THERMAL		0x54484D4C
+#define LMH_SUB_FN_CRNT			0x43524E54
+#define LMH_SUB_FN_REL			0x52454C00
+#define LMH_SUB_FN_BCL			0x42434C00
+
+#define LMH_ALGO_MODE_ENABLE		0x454E424C
+#define LMH_TH_HI_THRESHOLD		0x48494748
+#define LMH_TH_LOW_THRESHOLD		0x4C4F5700
+#define LMH_TH_ARM_THRESHOLD		0x41524D00
+
+#define LMH_REG_DCVS_INTR_CLR		0x8
+
+struct lmh_hw_data {
+	void __iomem *base;
+	struct irq_domain *domain;
+	int irq;
+};
+
+static irqreturn_t lmh_handle_irq(int hw_irq, void *data)
+{
+	struct lmh_hw_data *lmh_data = data;
+	int irq = irq_find_mapping(lmh_data->domain, 0);
+
+	/* Call the cpufreq driver to handle the interrupt */
+	if (irq)
+		generic_handle_irq(irq);
+
+	return 0;
+}
+
+static void lmh_enable_interrupt(struct irq_data *d)
+{
+	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+	/* Clear the existing interrupt */
+	writel(0xff, lmh_data->base + LMH_REG_DCVS_INTR_CLR);
+	enable_irq(lmh_data->irq);
+}
+
+static void lmh_disable_interrupt(struct irq_data *d)
+{
+	struct lmh_hw_data *lmh_data = irq_data_get_irq_chip_data(d);
+
+	disable_irq_nosync(lmh_data->irq);
+}
+
+static struct irq_chip lmh_irq_chip = {
+	.name           = "lmh",
+	.irq_enable	= lmh_enable_interrupt,
+	.irq_disable	= lmh_disable_interrupt
+};
+
+static int lmh_irq_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw)
+{
+	struct lmh_hw_data *lmh_data = d->host_data;
+
+	irq_set_chip_and_handler(irq, &lmh_irq_chip, handle_simple_irq);
+	irq_set_chip_data(irq, lmh_data);
+
+	return 0;
+}
+
+static const struct irq_domain_ops lmh_irq_ops = {
+	.map = lmh_irq_map,
+	.xlate = irq_domain_xlate_onecell,
+};
+
+static int lmh_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *np = dev->of_node;
+	struct device_node *cpu_node;
+	struct lmh_hw_data *lmh_data;
+	int temp_low, temp_high, temp_arm, cpu_id, ret;
+	u32 node_id;
+
+	lmh_data = devm_kzalloc(dev, sizeof(*lmh_data), GFP_KERNEL);
+	if (!lmh_data)
+		return -ENOMEM;
+
+	lmh_data->base = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(lmh_data->base))
+		return PTR_ERR(lmh_data->base);
+
+	cpu_node = of_parse_phandle(np, "cpus", 0);
+	if (!cpu_node)
+		return -EINVAL;
+	cpu_id = of_cpu_node_to_id(cpu_node);
+	of_node_put(cpu_node);
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-high-millicelsius", &temp_high);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-high-millicelsius property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-low-millicelsius", &temp_low);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-low-millicelsius property\n");
+		return ret;
+	}
+
+	ret = of_property_read_u32(np, "qcom,lmh-temp-arm-millicelsius", &temp_arm);
+	if (ret) {
+		dev_err(dev, "missing qcom,lmh-temp-arm-millicelsius property\n");
+		return ret;
+	}
+
+	/*
+	 * Only sdm845 has lmh hardware currently enabled from hlos. If this is needed
+	 * for other platforms, revisit this to check if the <cpu-id, node-id> should be part
+	 * of a dt match table.
+	 */
+	if (cpu_id == 0) {
+		node_id = LMH_CLUSTER0_NODE_ID;
+	} else if (cpu_id == 4) {
+		node_id = LMH_CLUSTER1_NODE_ID;
+	} else {
+		dev_err(dev, "Wrong CPU id associated with LMh node\n");
+		return -EINVAL;
+	}
+
+	if (!qcom_scm_lmh_dcvsh_available())
+		return -EINVAL;
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_CRNT, LMH_ALGO_MODE_ENABLE, 1,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret)
+		dev_err(dev, "Error %d enabling current subfunction\n", ret);
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_REL, LMH_ALGO_MODE_ENABLE, 1,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret)
+		dev_err(dev, "Error %d enabling reliability subfunction\n", ret);
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_BCL, LMH_ALGO_MODE_ENABLE, 1,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret)
+		dev_err(dev, "Error %d enabling BCL subfunction\n", ret);
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_ALGO_MODE_ENABLE, 1,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error %d enabling thermal subfunction\n", ret);
+		return ret;
+	}
+
+	ret = qcom_scm_lmh_profile_change(0x1);
+	if (ret) {
+		dev_err(dev, "Error %d changing profile\n", ret);
+		return ret;
+	}
+
+	/* Set default thermal trips */
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_ARM_THRESHOLD, temp_arm,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+		return ret;
+	}
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_HI_THRESHOLD, temp_high,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal HI threshold%d\n", ret);
+		return ret;
+	}
+
+	ret = qcom_scm_lmh_dcvsh(LMH_SUB_FN_THERMAL, LMH_TH_LOW_THRESHOLD, temp_low,
+				 LMH_NODE_DCVS, node_id, 0);
+	if (ret) {
+		dev_err(dev, "Error setting thermal ARM threshold%d\n", ret);
+		return ret;
+	}
+
+	lmh_data->irq = platform_get_irq(pdev, 0);
+	lmh_data->domain = irq_domain_add_linear(np, 1, &lmh_irq_ops, lmh_data);
+	if (!lmh_data->domain) {
+		dev_err(dev, "Error adding irq_domain\n");
+		return -EINVAL;
+	}
+
+	/* Disable the irq and let cpufreq enable it when ready to handle the interrupt */
+	irq_set_status_flags(lmh_data->irq, IRQ_NOAUTOEN);
+	ret = devm_request_irq(dev, lmh_data->irq, lmh_handle_irq,
+			       IRQF_ONESHOT | IRQF_NO_SUSPEND,
+			       "lmh-irq", lmh_data);
+	if (ret) {
+		dev_err(dev, "Error %d registering irq %x\n", ret, lmh_data->irq);
+		irq_domain_remove(lmh_data->domain);
+		return ret;
+	}
+
+	return 0;
+}
+
+static const struct of_device_id lmh_table[] = {
+	{ .compatible = "qcom,sdm845-lmh", },
+	{}
+};
+MODULE_DEVICE_TABLE(of, lmh_table);
+
+static struct platform_driver lmh_driver = {
+	.probe = lmh_probe,
+	.driver = {
+		.name = "qcom-lmh",
+		.of_match_table = lmh_table,
+		.suppress_bind_attrs = true,
+	},
+};
+module_platform_driver(lmh_driver);
+
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("QCOM LMh driver");
diff --git a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
index 232fd0b33325..8494cc04aa21 100644
--- a/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
+++ b/drivers/thermal/qcom/qcom-spmi-adc-tm5.c
@@ -359,6 +359,12 @@ static int adc_tm5_register_tzd(struct adc_tm5_chip *adc_tm)
 							   &adc_tm->channels[i],
 							   &adc_tm5_ops);
 		if (IS_ERR(tzd)) {
+			if (PTR_ERR(tzd) == -ENODEV) {
+				dev_warn(adc_tm->dev, "thermal sensor on channel %d is not used\n",
+					 adc_tm->channels[i].channel);
+				continue;
+			}
+
 			dev_err(adc_tm->dev, "Error registering TZ zone for channel %d: %ld\n",
 				adc_tm->channels[i].channel, PTR_ERR(tzd));
 			return PTR_ERR(tzd);
diff --git a/drivers/thermal/rcar_gen3_thermal.c b/drivers/thermal/rcar_gen3_thermal.c
index fdf16aa34eb4..85228d308dd3 100644
--- a/drivers/thermal/rcar_gen3_thermal.c
+++ b/drivers/thermal/rcar_gen3_thermal.c
@@ -84,7 +84,7 @@ struct rcar_gen3_thermal_tsc {
 	struct thermal_zone_device *zone;
 	struct equation_coefs coef;
 	int tj_t;
-	int id; /* thermal channel id */
+	unsigned int id; /* thermal channel id */
 };
 
 struct rcar_gen3_thermal_priv {
@@ -190,10 +190,64 @@ static int rcar_gen3_thermal_get_temp(void *devdata, int *temp)
 	return 0;
 }
 
-static const struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = {
+static int rcar_gen3_thermal_mcelsius_to_temp(struct rcar_gen3_thermal_tsc *tsc,
+					      int mcelsius)
+{
+	int celsius, val;
+
+	celsius = DIV_ROUND_CLOSEST(mcelsius, 1000);
+	if (celsius <= INT_FIXPT(tsc->tj_t))
+		val = celsius * tsc->coef.a1 + tsc->coef.b1;
+	else
+		val = celsius * tsc->coef.a2 + tsc->coef.b2;
+
+	return INT_FIXPT(val);
+}
+
+static int rcar_gen3_thermal_set_trips(void *devdata, int low, int high)
+{
+	struct rcar_gen3_thermal_tsc *tsc = devdata;
+	u32 irqmsk = 0;
+
+	if (low != -INT_MAX) {
+		irqmsk |= IRQ_TEMPD1;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP1,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, low));
+	}
+
+	if (high != INT_MAX) {
+		irqmsk |= IRQ_TEMP2;
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQTEMP2,
+					rcar_gen3_thermal_mcelsius_to_temp(tsc, high));
+	}
+
+	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, irqmsk);
+
+	return 0;
+}
+
+static struct thermal_zone_of_device_ops rcar_gen3_tz_of_ops = {
 	.get_temp	= rcar_gen3_thermal_get_temp,
+	.set_trips	= rcar_gen3_thermal_set_trips,
 };
 
+static irqreturn_t rcar_gen3_thermal_irq(int irq, void *data)
+{
+	struct rcar_gen3_thermal_priv *priv = data;
+	unsigned int i;
+	u32 status;
+
+	for (i = 0; i < priv->num_tscs; i++) {
+		status = rcar_gen3_thermal_read(priv->tscs[i], REG_GEN3_IRQSTR);
+		rcar_gen3_thermal_write(priv->tscs[i], REG_GEN3_IRQSTR, 0);
+		if (status)
+			thermal_zone_device_update(priv->tscs[i]->zone,
+						   THERMAL_EVENT_UNSPECIFIED);
+	}
+
+	return IRQ_HANDLED;
+}
+
 static const struct soc_device_attribute r8a7795es1[] = {
 	{ .soc_id = "r8a7795", .revision = "ES1.*" },
 	{ /* sentinel */ }
@@ -210,6 +264,9 @@ static void rcar_gen3_thermal_init_r8a7795es1(struct rcar_gen3_thermal_tsc *tsc)
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0x3F);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+	if (tsc->zone->ops->set_trips)
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
+					IRQ_TEMPD1 | IRQ_TEMP2);
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_CTSR,
 				CTSR_PONM | CTSR_AOUT | CTSR_THBGR | CTSR_VMEN);
@@ -235,6 +292,9 @@ static void rcar_gen3_thermal_init(struct rcar_gen3_thermal_tsc *tsc)
 
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQCTL, 0);
 	rcar_gen3_thermal_write(tsc, REG_GEN3_IRQMSK, 0);
+	if (tsc->zone->ops->set_trips)
+		rcar_gen3_thermal_write(tsc, REG_GEN3_IRQEN,
+					IRQ_TEMPD1 | IRQ_TEMP2);
 
 	reg_val = rcar_gen3_thermal_read(tsc, REG_GEN3_THCTR);
 	reg_val |= THCTR_THSST;
@@ -303,6 +363,34 @@ static void rcar_gen3_hwmon_action(void *data)
 	thermal_remove_hwmon_sysfs(zone);
 }
 
+static int rcar_gen3_thermal_request_irqs(struct rcar_gen3_thermal_priv *priv,
+					  struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	unsigned int i;
+	char *irqname;
+	int ret, irq;
+
+	for (i = 0; i < 2; i++) {
+		irq = platform_get_irq_optional(pdev, i);
+		if (irq < 0)
+			return irq;
+
+		irqname = devm_kasprintf(dev, GFP_KERNEL, "%s:ch%d",
+					 dev_name(dev), i);
+		if (!irqname)
+			return -ENOMEM;
+
+		ret = devm_request_threaded_irq(dev, irq, NULL,
+						rcar_gen3_thermal_irq,
+						IRQF_ONESHOT, irqname, priv);
+		if (ret)
+			return ret;
+	}
+
+	return 0;
+}
+
 static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 {
 	struct rcar_gen3_thermal_priv *priv;
@@ -310,7 +398,8 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 	const int *ths_tj_1 = of_device_get_match_data(dev);
 	struct resource *res;
 	struct thermal_zone_device *zone;
-	int ret, i;
+	unsigned int i;
+	int ret;
 
 	/* default values if FUSEs are missing */
 	/* TODO: Read values from hardware on supported platforms */
@@ -326,6 +415,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
+	if (rcar_gen3_thermal_request_irqs(priv, pdev))
+		rcar_gen3_tz_of_ops.set_trips = NULL;
+
 	pm_runtime_enable(dev);
 	pm_runtime_get_sync(dev);
 
@@ -351,9 +443,6 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 
 		priv->tscs[i] = tsc;
 
-		priv->thermal_init(tsc);
-		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
-
 		zone = devm_thermal_zone_of_sensor_register(dev, i, tsc,
 							    &rcar_gen3_tz_of_ops);
 		if (IS_ERR(zone)) {
@@ -363,6 +452,9 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		}
 		tsc->zone = zone;
 
+		priv->thermal_init(tsc);
+		rcar_gen3_thermal_calc_coefs(tsc, ptat, thcodes[i], *ths_tj_1);
+
 		tsc->zone->tzp->no_hwmon = false;
 		ret = thermal_add_hwmon_sysfs(tsc->zone);
 		if (ret)
@@ -376,7 +468,7 @@ static int rcar_gen3_thermal_probe(struct platform_device *pdev)
 		if (ret < 0)
 			goto error_unregister;
 
-		dev_info(dev, "TSC%d: Loaded %d trip points\n", i, ret);
+		dev_info(dev, "TSC%u: Loaded %d trip points\n", i, ret);
 	}
 
 	priv->num_tscs = i;
@@ -401,8 +493,12 @@ static int __maybe_unused rcar_gen3_thermal_resume(struct device *dev)
 
 	for (i = 0; i < priv->num_tscs; i++) {
 		struct rcar_gen3_thermal_tsc *tsc = priv->tscs[i];
+		struct thermal_zone_device *zone = tsc->zone;
 
 		priv->thermal_init(tsc);
+		if (zone->ops->set_trips)
+			rcar_gen3_thermal_set_trips(tsc, zone->prev_low_trip,
+						    zone->prev_high_trip);
 	}
 
 	return 0;
diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c
index e9a90bc23b11..f4ab4c5b4b62 100644
--- a/drivers/thermal/samsung/exynos_tmu.c
+++ b/drivers/thermal/samsung/exynos_tmu.c
@@ -1073,6 +1073,7 @@ static int exynos_tmu_probe(struct platform_device *pdev)
 		data->sclk = devm_clk_get(&pdev->dev, "tmu_sclk");
 		if (IS_ERR(data->sclk)) {
 			dev_err(&pdev->dev, "Failed to get sclk\n");
+			ret = PTR_ERR(data->sclk);
 			goto err_clk;
 		} else {
 			ret = clk_prepare_enable(data->sclk);
diff --git a/drivers/thermal/tegra/Kconfig b/drivers/thermal/tegra/Kconfig
index 46c2215867cd..cfa41d87a794 100644
--- a/drivers/thermal/tegra/Kconfig
+++ b/drivers/thermal/tegra/Kconfig
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 menu "NVIDIA Tegra thermal drivers"
-depends on ARCH_TEGRA
+depends on ARCH_TEGRA || COMPILE_TEST
 
 config TEGRA_SOCTHERM
 	tristate "Tegra SOCTHERM thermal management"
@@ -18,4 +18,11 @@ config TEGRA_BPMP_THERMAL
 	  Enable this option for support for sensing system temperature of NVIDIA
 	  Tegra systems-on-chip with the BPMP coprocessor (Tegra186).
 
+config TEGRA30_TSENSOR
+	tristate "Tegra30 Thermal Sensor"
+	depends on ARCH_TEGRA_3x_SOC || COMPILE_TEST
+	help
+	  Enable this option to support thermal management of NVIDIA Tegra30
+	  system-on-chip.
+
 endmenu
diff --git a/drivers/thermal/tegra/Makefile b/drivers/thermal/tegra/Makefile
index 0f2b66edf0d2..eb27d194c583 100644
--- a/drivers/thermal/tegra/Makefile
+++ b/drivers/thermal/tegra/Makefile
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 obj-$(CONFIG_TEGRA_SOCTHERM)		+= tegra-soctherm.o
 obj-$(CONFIG_TEGRA_BPMP_THERMAL)	+= tegra-bpmp-thermal.o
+obj-$(CONFIG_TEGRA30_TSENSOR)		+= tegra30-tsensor.o
 
 tegra-soctherm-y				:= soctherm.o soctherm-fuse.o
 tegra-soctherm-$(CONFIG_ARCH_TEGRA_124_SOC)	+= tegra124-soctherm.o
diff --git a/drivers/thermal/tegra/soctherm.c b/drivers/thermal/tegra/soctherm.c
index 8e303e9d1dc0..210325f92559 100644
--- a/drivers/thermal/tegra/soctherm.c
+++ b/drivers/thermal/tegra/soctherm.c
@@ -450,8 +450,8 @@ static int enforce_temp_range(struct device *dev, int trip_temp)
 
 	temp = clamp_val(trip_temp, min_low_temp, max_high_temp);
 	if (temp != trip_temp)
-		dev_info(dev, "soctherm: trip temperature %d forced to %d\n",
-			 trip_temp, temp);
+		dev_dbg(dev, "soctherm: trip temperature %d forced to %d\n",
+			trip_temp, temp);
 	return temp;
 }
 
diff --git a/drivers/thermal/tegra/tegra30-tsensor.c b/drivers/thermal/tegra/tegra30-tsensor.c
new file mode 100644
index 000000000000..9b6b693cbcf8
--- /dev/null
+++ b/drivers/thermal/tegra/tegra30-tsensor.c
@@ -0,0 +1,673 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Tegra30 SoC Thermal Sensor driver
+ *
+ * Based on downstream HWMON driver from NVIDIA.
+ * Copyright (C) 2011 NVIDIA Corporation
+ *
+ * Author: Dmitry Osipenko <digetx@gmail.com>
+ * Copyright (C) 2021 GRATE-DRIVER project
+ */
+
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/reset.h>
+#include <linux/slab.h>
+#include <linux/thermal.h>
+#include <linux/types.h>
+
+#include <soc/tegra/fuse.h>
+
+#include "../thermal_core.h"
+#include "../thermal_hwmon.h"
+
+#define TSENSOR_SENSOR0_CONFIG0				0x0
+#define TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP		BIT(0)
+#define TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN		BIT(1)
+#define TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN		BIT(2)
+#define TSENSOR_SENSOR0_CONFIG0_DVFS_EN			BIT(3)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN	BIT(4)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN	BIT(5)
+#define TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN	BIT(6)
+#define TSENSOR_SENSOR0_CONFIG0_M			GENMASK(23,  8)
+#define TSENSOR_SENSOR0_CONFIG0_N			GENMASK(31, 24)
+
+#define TSENSOR_SENSOR0_CONFIG1				0x8
+#define TSENSOR_SENSOR0_CONFIG1_TH1			GENMASK(15,  0)
+#define TSENSOR_SENSOR0_CONFIG1_TH2			GENMASK(31, 16)
+
+#define TSENSOR_SENSOR0_CONFIG2				0xc
+#define TSENSOR_SENSOR0_CONFIG2_TH3			GENMASK(15,  0)
+
+#define TSENSOR_SENSOR0_STATUS0				0x18
+#define TSENSOR_SENSOR0_STATUS0_STATE			GENMASK(2, 0)
+#define TSENSOR_SENSOR0_STATUS0_INTR			BIT(8)
+#define TSENSOR_SENSOR0_STATUS0_CURRENT_VALID		BIT(9)
+
+#define TSENSOR_SENSOR0_TS_STATUS1			0x1c
+#define TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT	GENMASK(31, 16)
+
+#define TEGRA30_FUSE_TEST_PROG_VER			0x28
+
+#define TEGRA30_FUSE_TSENSOR_CALIB			0x98
+#define TEGRA30_FUSE_TSENSOR_CALIB_LOW			GENMASK(15,  0)
+#define TEGRA30_FUSE_TSENSOR_CALIB_HIGH			GENMASK(31, 16)
+
+#define TEGRA30_FUSE_SPARE_BIT				0x144
+
+struct tegra_tsensor;
+
+struct tegra_tsensor_calibration_data {
+	int a, b, m, n, p, r;
+};
+
+struct tegra_tsensor_channel {
+	void __iomem *regs;
+	unsigned int id;
+	struct tegra_tsensor *ts;
+	struct thermal_zone_device *tzd;
+};
+
+struct tegra_tsensor {
+	void __iomem *regs;
+	bool swap_channels;
+	struct clk *clk;
+	struct device *dev;
+	struct reset_control *rst;
+	struct tegra_tsensor_channel ch[2];
+	struct tegra_tsensor_calibration_data calib;
+};
+
+static int tegra_tsensor_hw_enable(const struct tegra_tsensor *ts)
+{
+	u32 val;
+	int err;
+
+	err = reset_control_assert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+		return err;
+	}
+
+	err = clk_prepare_enable(ts->clk);
+	if (err) {
+		dev_err(ts->dev, "failed to enable clock: %d\n", err);
+		return err;
+	}
+
+	fsleep(1000);
+
+	err = reset_control_deassert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to deassert hardware reset: %d\n", err);
+		goto disable_clk;
+	}
+
+	/*
+	 * Sensors are enabled after reset by default, but not gauging
+	 * until clock counter is programmed.
+	 *
+	 * M: number of reference clock pulses after which every
+	 *    temperature / voltage measurement is made
+	 *
+	 * N: number of reference clock counts for which the counter runs
+	 */
+	val  = FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_M, 12500);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_N, 255);
+
+	/* apply the same configuration to both channels */
+	writel_relaxed(val, ts->regs + 0x40 + TSENSOR_SENSOR0_CONFIG0);
+	writel_relaxed(val, ts->regs + 0x80 + TSENSOR_SENSOR0_CONFIG0);
+
+	return 0;
+
+disable_clk:
+	clk_disable_unprepare(ts->clk);
+
+	return err;
+}
+
+static int tegra_tsensor_hw_disable(const struct tegra_tsensor *ts)
+{
+	int err;
+
+	err = reset_control_assert(ts->rst);
+	if (err) {
+		dev_err(ts->dev, "failed to assert hardware reset: %d\n", err);
+		return err;
+	}
+
+	clk_disable_unprepare(ts->clk);
+
+	return 0;
+}
+
+static void devm_tegra_tsensor_hw_disable(void *data)
+{
+	const struct tegra_tsensor *ts = data;
+
+	tegra_tsensor_hw_disable(ts);
+}
+
+static int tegra_tsensor_get_temp(void *data, int *temp)
+{
+	const struct tegra_tsensor_channel *tsc = data;
+	const struct tegra_tsensor *ts = tsc->ts;
+	int err, c1, c2, c3, c4, counter;
+	u32 val;
+
+	/*
+	 * Counter will be invalid if hardware is misprogrammed or not enough
+	 * time passed since the time when sensor was enabled.
+	 */
+	err = readl_relaxed_poll_timeout(tsc->regs + TSENSOR_SENSOR0_STATUS0, val,
+					 val & TSENSOR_SENSOR0_STATUS0_CURRENT_VALID,
+					 21 * USEC_PER_MSEC,
+					 21 * USEC_PER_MSEC * 50);
+	if (err) {
+		dev_err_once(ts->dev, "ch%u: counter invalid\n", tsc->id);
+		return err;
+	}
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_TS_STATUS1);
+	counter = FIELD_GET(TSENSOR_SENSOR0_TS_STATUS1_CURRENT_COUNT, val);
+
+	/*
+	 * This shouldn't happen with a valid counter status, nevertheless
+	 * lets verify the value since it's in a separate (from status)
+	 * register.
+	 */
+	if (counter == 0xffff) {
+		dev_err_once(ts->dev, "ch%u: counter overflow\n", tsc->id);
+		return -EINVAL;
+	}
+
+	/*
+	 * temperature = a * counter + b
+	 * temperature = m * (temperature ^ 2) + n * temperature + p
+	 */
+	c1 = DIV_ROUND_CLOSEST(ts->calib.a * counter + ts->calib.b, 1000000);
+	c1 = c1 ?: 1;
+	c2 = DIV_ROUND_CLOSEST(ts->calib.p, c1);
+	c3 = c1 * ts->calib.m;
+	c4 = ts->calib.n;
+
+	*temp = DIV_ROUND_CLOSEST(c1 * (c2 + c3 + c4), 1000);
+
+	return 0;
+}
+
+static int tegra_tsensor_temp_to_counter(const struct tegra_tsensor *ts, int temp)
+{
+	int c1, c2;
+
+	c1 = DIV_ROUND_CLOSEST(ts->calib.p - temp * 1000, ts->calib.m);
+	c2 = -ts->calib.r - int_sqrt(ts->calib.r * ts->calib.r - c1);
+
+	return DIV_ROUND_CLOSEST(c2 * 1000000 - ts->calib.b, ts->calib.a);
+}
+
+static int tegra_tsensor_set_trips(void *data, int low, int high)
+{
+	const struct tegra_tsensor_channel *tsc = data;
+	const struct tegra_tsensor *ts = tsc->ts;
+	u32 val;
+
+	/*
+	 * TSENSOR doesn't trigger interrupt on the "low" temperature breach,
+	 * hence bail out if high temperature is unspecified.
+	 */
+	if (high == INT_MAX)
+		return 0;
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+	val &= ~TSENSOR_SENSOR0_CONFIG1_TH1;
+
+	high = tegra_tsensor_temp_to_counter(ts, high);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH1, high);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+	return 0;
+}
+
+static const struct thermal_zone_of_device_ops ops = {
+	.get_temp = tegra_tsensor_get_temp,
+	.set_trips = tegra_tsensor_set_trips,
+};
+
+static bool
+tegra_tsensor_handle_channel_interrupt(const struct tegra_tsensor *ts,
+				       unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	u32 val;
+
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_STATUS0);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_STATUS0);
+
+	if (FIELD_GET(TSENSOR_SENSOR0_STATUS0_STATE, val) == 5)
+		dev_err_ratelimited(ts->dev, "ch%u: counter overflowed\n", id);
+
+	if (!FIELD_GET(TSENSOR_SENSOR0_STATUS0_INTR, val))
+		return false;
+
+	thermal_zone_device_update(tsc->tzd, THERMAL_EVENT_UNSPECIFIED);
+
+	return true;
+}
+
+static irqreturn_t tegra_tsensor_isr(int irq, void *data)
+{
+	const struct tegra_tsensor *ts = data;
+	bool handled = false;
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++)
+		handled |= tegra_tsensor_handle_channel_interrupt(ts, i);
+
+	return handled ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int tegra_tsensor_disable_hw_channel(const struct tegra_tsensor *ts,
+					    unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	struct thermal_zone_device *tzd = tsc->tzd;
+	u32 val;
+	int err;
+
+	if (!tzd)
+		goto stop_channel;
+
+	err = thermal_zone_device_disable(tzd);
+	if (err) {
+		dev_err(ts->dev, "ch%u: failed to disable zone: %d\n", id, err);
+		return err;
+	}
+
+stop_channel:
+	/* stop channel gracefully */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP, 1);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+	return 0;
+}
+
+static void tegra_tsensor_get_hw_channel_trips(struct thermal_zone_device *tzd,
+					       int *hot_trip, int *crit_trip)
+{
+	unsigned int i;
+
+	/*
+	 * 90C is the maximal critical temperature of all Tegra30 SoC variants,
+	 * use it for the default trip if unspecified in a device-tree.
+	 */
+	*hot_trip  = 85000;
+	*crit_trip = 90000;
+
+	for (i = 0; i < tzd->trips; i++) {
+		enum thermal_trip_type type;
+		int trip_temp;
+
+		tzd->ops->get_trip_temp(tzd, i, &trip_temp);
+		tzd->ops->get_trip_type(tzd, i, &type);
+
+		if (type == THERMAL_TRIP_HOT)
+			*hot_trip = trip_temp;
+
+		if (type == THERMAL_TRIP_CRITICAL)
+			*crit_trip = trip_temp;
+	}
+
+	/* clamp hardware trips to the calibration limits */
+	*hot_trip = clamp(*hot_trip, 25000, 90000);
+
+	/*
+	 * Kernel will perform a normal system shut down if it will
+	 * see that critical temperature is breached, hence set the
+	 * hardware limit by 5C higher in order to allow system to
+	 * shut down gracefully before sending signal to the Power
+	 * Management controller.
+	 */
+	*crit_trip = clamp(*crit_trip + 5000, 25000, 90000);
+}
+
+static int tegra_tsensor_enable_hw_channel(const struct tegra_tsensor *ts,
+					   unsigned int id)
+{
+	const struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	struct thermal_zone_device *tzd = tsc->tzd;
+	int err, hot_trip = 0, crit_trip = 0;
+	u32 val;
+
+	if (!tzd) {
+		val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+		val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+		writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+		return 0;
+	}
+
+	tegra_tsensor_get_hw_channel_trips(tzd, &hot_trip, &crit_trip);
+
+	/* prevent potential racing with tegra_tsensor_set_trips() */
+	mutex_lock(&tzd->lock);
+
+	dev_info_once(ts->dev, "ch%u: PMC emergency shutdown trip set to %dC\n",
+		      id, DIV_ROUND_CLOSEST(crit_trip, 1000));
+
+	hot_trip  = tegra_tsensor_temp_to_counter(ts, hot_trip);
+	crit_trip = tegra_tsensor_temp_to_counter(ts, crit_trip);
+
+	/* program LEVEL2 counter threshold */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+	val &= ~TSENSOR_SENSOR0_CONFIG1_TH2;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG1_TH2, hot_trip);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG1);
+
+	/* program LEVEL3 counter threshold */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+	val &= ~TSENSOR_SENSOR0_CONFIG2_TH3;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG2_TH3, crit_trip);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG2);
+
+	/*
+	 * Enable sensor, emergency shutdown, interrupts for level 1/2/3
+	 * breaches and counter overflow condition.
+	 *
+	 * Disable DIV2 throttle for now since we need to figure out how
+	 * to integrate it properly with the thermal framework.
+	 *
+	 * Thermal levels supported by hardware:
+	 *
+	 *     Level 0 = cold
+	 *     Level 1 = passive cooling (cpufreq DVFS)
+	 *     Level 2 = passive cooling assisted by hardware (DIV2)
+	 *     Level 3 = emergency shutdown assisted by hardware (PMC)
+	 */
+	val = readl_relaxed(tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+	val &= ~TSENSOR_SENSOR0_CONFIG0_SENSOR_STOP;
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_DVFS_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_HW_FREQ_DIV_EN, 0);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_THERMAL_RST_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_OVERFLOW_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_HW_FREQ_DIV_EN, 1);
+	val |= FIELD_PREP(TSENSOR_SENSOR0_CONFIG0_INTR_THERMAL_RST_EN, 1);
+	writel_relaxed(val, tsc->regs + TSENSOR_SENSOR0_CONFIG0);
+
+	mutex_unlock(&tzd->lock);
+
+	err = thermal_zone_device_enable(tzd);
+	if (err) {
+		dev_err(ts->dev, "ch%u: failed to enable zone: %d\n", id, err);
+		return err;
+	}
+
+	return 0;
+}
+
+static bool tegra_tsensor_fuse_read_spare(unsigned int spare)
+{
+	u32 val = 0;
+
+	tegra_fuse_readl(TEGRA30_FUSE_SPARE_BIT + spare * 4, &val);
+
+	return !!val;
+}
+
+static int tegra_tsensor_nvmem_setup(struct tegra_tsensor *ts)
+{
+	u32 i, ate_ver = 0, cal = 0, t1_25C = 0, t2_90C = 0;
+	int err, c1_25C, c2_90C;
+
+	err = tegra_fuse_readl(TEGRA30_FUSE_TEST_PROG_VER, &ate_ver);
+	if (err) {
+		dev_err_probe(ts->dev, err, "failed to get ATE version\n");
+		return err;
+	}
+
+	if (ate_ver < 8) {
+		dev_info(ts->dev, "unsupported ATE version: %u\n", ate_ver);
+		return -ENODEV;
+	}
+
+	/*
+	 * We have two TSENSOR channels in a two different spots on SoC.
+	 * Second channel provides more accurate data on older SoC versions,
+	 * use it as a primary channel.
+	 */
+	if (ate_ver <= 21) {
+		dev_info_once(ts->dev,
+			      "older ATE version detected, channels remapped\n");
+		ts->swap_channels = true;
+	}
+
+	err = tegra_fuse_readl(TEGRA30_FUSE_TSENSOR_CALIB, &cal);
+	if (err) {
+		dev_err(ts->dev, "failed to get calibration data: %d\n", err);
+		return err;
+	}
+
+	/* get calibrated counter values for 25C/90C thresholds */
+	c1_25C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_LOW, cal);
+	c2_90C = FIELD_GET(TEGRA30_FUSE_TSENSOR_CALIB_HIGH, cal);
+
+	/* and calibrated temperatures corresponding to the counter values */
+	for (i = 0; i < 7; i++) {
+		t1_25C |= tegra_tsensor_fuse_read_spare(14 + i) << i;
+		t1_25C |= tegra_tsensor_fuse_read_spare(21 + i) << i;
+
+		t2_90C |= tegra_tsensor_fuse_read_spare(0 + i) << i;
+		t2_90C |= tegra_tsensor_fuse_read_spare(7 + i) << i;
+	}
+
+	if (c2_90C - c1_25C <= t2_90C - t1_25C) {
+		dev_err(ts->dev, "invalid calibration data: %d %d %u %u\n",
+			c2_90C, c1_25C, t2_90C, t1_25C);
+		return -EINVAL;
+	}
+
+	/* all calibration coefficients are premultiplied by 1000000 */
+
+	ts->calib.a = DIV_ROUND_CLOSEST((t2_90C - t1_25C) * 1000000,
+					(c2_90C - c1_25C));
+
+	ts->calib.b = t1_25C * 1000000 - ts->calib.a * c1_25C;
+
+	if (tegra_sku_info.revision == TEGRA_REVISION_A01) {
+		ts->calib.m =     -2775;
+		ts->calib.n =   1338811;
+		ts->calib.p =  -7300000;
+	} else {
+		ts->calib.m =     -3512;
+		ts->calib.n =   1528943;
+		ts->calib.p = -11100000;
+	}
+
+	/* except the coefficient of a reduced quadratic equation */
+	ts->calib.r = DIV_ROUND_CLOSEST(ts->calib.n, ts->calib.m * 2);
+
+	dev_info_once(ts->dev,
+		      "calibration: %d %d %u %u ATE ver: %u SoC rev: %u\n",
+		      c2_90C, c1_25C, t2_90C, t1_25C, ate_ver,
+		      tegra_sku_info.revision);
+
+	return 0;
+}
+
+static int tegra_tsensor_register_channel(struct tegra_tsensor *ts,
+					  unsigned int id)
+{
+	struct tegra_tsensor_channel *tsc = &ts->ch[id];
+	unsigned int hw_id = ts->swap_channels ? !id : id;
+
+	tsc->ts = ts;
+	tsc->id = id;
+	tsc->regs = ts->regs + 0x40 * (hw_id + 1);
+
+	tsc->tzd = devm_thermal_zone_of_sensor_register(ts->dev, id, tsc, &ops);
+	if (IS_ERR(tsc->tzd)) {
+		if (PTR_ERR(tsc->tzd) != -ENODEV)
+			return dev_err_probe(ts->dev, PTR_ERR(tsc->tzd),
+					     "failed to register thermal zone\n");
+
+		/*
+		 * It's okay if sensor isn't assigned to any thermal zone
+		 * in a device-tree.
+		 */
+		tsc->tzd = NULL;
+		return 0;
+	}
+
+	if (devm_thermal_add_hwmon_sysfs(tsc->tzd))
+		dev_warn(ts->dev, "failed to add hwmon sysfs attributes\n");
+
+	return 0;
+}
+
+static int tegra_tsensor_probe(struct platform_device *pdev)
+{
+	struct tegra_tsensor *ts;
+	unsigned int i;
+	int err, irq;
+
+	ts = devm_kzalloc(&pdev->dev, sizeof(*ts), GFP_KERNEL);
+	if (!ts)
+		return -ENOMEM;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ts->dev = &pdev->dev;
+	platform_set_drvdata(pdev, ts);
+
+	ts->regs = devm_platform_ioremap_resource(pdev, 0);
+	if (IS_ERR(ts->regs))
+		return PTR_ERR(ts->regs);
+
+	ts->clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(ts->clk))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts->clk),
+				     "failed to get clock\n");
+
+	ts->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL);
+	if (IS_ERR(ts->rst))
+		return dev_err_probe(&pdev->dev, PTR_ERR(ts->rst),
+				     "failed to get reset control\n");
+
+	err = tegra_tsensor_nvmem_setup(ts);
+	if (err)
+		return err;
+
+	err = tegra_tsensor_hw_enable(ts);
+	if (err)
+		return err;
+
+	err = devm_add_action_or_reset(&pdev->dev,
+				       devm_tegra_tsensor_hw_disable,
+				       ts);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_register_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	err = devm_request_threaded_irq(&pdev->dev, irq, NULL,
+					tegra_tsensor_isr, IRQF_ONESHOT,
+					"tegra_tsensor", ts);
+	if (err)
+		return dev_err_probe(&pdev->dev, err,
+				     "failed to request interrupt\n");
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_enable_hw_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static int __maybe_unused tegra_tsensor_suspend(struct device *dev)
+{
+	struct tegra_tsensor *ts = dev_get_drvdata(dev);
+	unsigned int i;
+	int err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_disable_hw_channel(ts, i);
+		if (err)
+			goto enable_channel;
+	}
+
+	err = tegra_tsensor_hw_disable(ts);
+	if (err)
+		goto enable_channel;
+
+	return 0;
+
+enable_channel:
+	while (i--)
+		tegra_tsensor_enable_hw_channel(ts, i);
+
+	return err;
+}
+
+static int __maybe_unused tegra_tsensor_resume(struct device *dev)
+{
+	struct tegra_tsensor *ts = dev_get_drvdata(dev);
+	unsigned int i;
+	int err;
+
+	err = tegra_tsensor_hw_enable(ts);
+	if (err)
+		return err;
+
+	for (i = 0; i < ARRAY_SIZE(ts->ch); i++) {
+		err = tegra_tsensor_enable_hw_channel(ts, i);
+		if (err)
+			return err;
+	}
+
+	return 0;
+}
+
+static const struct dev_pm_ops tegra_tsensor_pm_ops = {
+	SET_NOIRQ_SYSTEM_SLEEP_PM_OPS(tegra_tsensor_suspend,
+				      tegra_tsensor_resume)
+};
+
+static const struct of_device_id tegra_tsensor_of_match[] = {
+	{ .compatible = "nvidia,tegra30-tsensor", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, tegra_tsensor_of_match);
+
+static struct platform_driver tegra_tsensor_driver = {
+	.probe = tegra_tsensor_probe,
+	.driver = {
+		.name = "tegra30-tsensor",
+		.of_match_table = tegra_tsensor_of_match,
+		.pm = &tegra_tsensor_pm_ops,
+	},
+};
+module_platform_driver(tegra_tsensor_driver);
+
+MODULE_DESCRIPTION("NVIDIA Tegra30 Thermal Sensor driver");
+MODULE_AUTHOR("Dmitry Osipenko <digetx@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/thunderbolt/test.c b/drivers/thunderbolt/test.c
index eca0ef311bde..1f69bab236ee 100644
--- a/drivers/thunderbolt/test.c
+++ b/drivers/thunderbolt/test.c
@@ -2206,23 +2206,13 @@ static void tb_test_credit_alloc_dma_multiple(struct kunit *test)
 	tb_tunnel_free(tunnel2);
 }
 
-static void tb_test_credit_alloc_all(struct kunit *test)
+static struct tb_tunnel *TB_TEST_PCIE_TUNNEL(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
 {
-	struct tb_port *up, *down, *in, *out, *nhi, *port;
-	struct tb_tunnel *pcie_tunnel, *dp_tunnel1, *dp_tunnel2, *usb3_tunnel;
-	struct tb_tunnel *dma_tunnel1, *dma_tunnel2;
-	struct tb_switch *host, *dev;
+	struct tb_port *up, *down;
+	struct tb_tunnel *pcie_tunnel;
 	struct tb_path *path;
 
-	/*
-	 * Create PCIe, 2 x DP, USB 3.x and two DMA tunnels from host to
-	 * device. Expectation is that all these can be established with
-	 * the default credit allocation found in Intel hardware.
-	 */
-
-	host = alloc_host_usb4(test);
-	dev = alloc_dev_usb4(test, host, 0x1, true);
-
 	down = &host->ports[8];
 	up = &dev->ports[9];
 	pcie_tunnel = tb_tunnel_alloc_pci(NULL, up, down);
@@ -2243,9 +2233,18 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 64U);
 
+	return pcie_tunnel;
+}
+
+static struct tb_tunnel *TB_TEST_DP_TUNNEL1(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
+{
+	struct tb_port *in, *out;
+	struct tb_tunnel *dp_tunnel1;
+	struct tb_path *path;
+
 	in = &host->ports[5];
 	out = &dev->ports[13];
-
 	dp_tunnel1 = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
 	KUNIT_ASSERT_TRUE(test, dp_tunnel1 != NULL);
 	KUNIT_ASSERT_EQ(test, dp_tunnel1->npaths, (size_t)3);
@@ -2271,9 +2270,18 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 1U);
 
+	return dp_tunnel1;
+}
+
+static struct tb_tunnel *TB_TEST_DP_TUNNEL2(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
+{
+	struct tb_port *in, *out;
+	struct tb_tunnel *dp_tunnel2;
+	struct tb_path *path;
+
 	in = &host->ports[6];
 	out = &dev->ports[14];
-
 	dp_tunnel2 = tb_tunnel_alloc_dp(NULL, in, out, 0, 0);
 	KUNIT_ASSERT_TRUE(test, dp_tunnel2 != NULL);
 	KUNIT_ASSERT_EQ(test, dp_tunnel2->npaths, (size_t)3);
@@ -2299,6 +2307,16 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 1U);
 
+	return dp_tunnel2;
+}
+
+static struct tb_tunnel *TB_TEST_USB3_TUNNEL(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
+{
+	struct tb_port *up, *down;
+	struct tb_tunnel *usb3_tunnel;
+	struct tb_path *path;
+
 	down = &host->ports[12];
 	up = &dev->ports[16];
 	usb3_tunnel = tb_tunnel_alloc_usb3(NULL, up, down, 0, 0);
@@ -2319,9 +2337,18 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 32U);
 
+	return usb3_tunnel;
+}
+
+static struct tb_tunnel *TB_TEST_DMA_TUNNEL1(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
+{
+	struct tb_port *nhi, *port;
+	struct tb_tunnel *dma_tunnel1;
+	struct tb_path *path;
+
 	nhi = &host->ports[7];
 	port = &dev->ports[3];
-
 	dma_tunnel1 = tb_tunnel_alloc_dma(NULL, nhi, port, 8, 1, 8, 1);
 	KUNIT_ASSERT_TRUE(test, dma_tunnel1 != NULL);
 	KUNIT_ASSERT_EQ(test, dma_tunnel1->npaths, (size_t)2);
@@ -2340,6 +2367,18 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 14U);
 
+	return dma_tunnel1;
+}
+
+static struct tb_tunnel *TB_TEST_DMA_TUNNEL2(struct kunit *test,
+			struct tb_switch *host, struct tb_switch *dev)
+{
+	struct tb_port *nhi, *port;
+	struct tb_tunnel *dma_tunnel2;
+	struct tb_path *path;
+
+	nhi = &host->ports[7];
+	port = &dev->ports[3];
 	dma_tunnel2 = tb_tunnel_alloc_dma(NULL, nhi, port, 9, 2, 9, 2);
 	KUNIT_ASSERT_TRUE(test, dma_tunnel2 != NULL);
 	KUNIT_ASSERT_EQ(test, dma_tunnel2->npaths, (size_t)2);
@@ -2358,6 +2397,31 @@ static void tb_test_credit_alloc_all(struct kunit *test)
 	KUNIT_EXPECT_EQ(test, path->hops[1].nfc_credits, 0U);
 	KUNIT_EXPECT_EQ(test, path->hops[1].initial_credits, 1U);
 
+	return dma_tunnel2;
+}
+
+static void tb_test_credit_alloc_all(struct kunit *test)
+{
+	struct tb_tunnel *pcie_tunnel, *dp_tunnel1, *dp_tunnel2, *usb3_tunnel;
+	struct tb_tunnel *dma_tunnel1, *dma_tunnel2;
+	struct tb_switch *host, *dev;
+
+	/*
+	 * Create PCIe, 2 x DP, USB 3.x and two DMA tunnels from host to
+	 * device. Expectation is that all these can be established with
+	 * the default credit allocation found in Intel hardware.
+	 */
+
+	host = alloc_host_usb4(test);
+	dev = alloc_dev_usb4(test, host, 0x1, true);
+
+	pcie_tunnel = TB_TEST_PCIE_TUNNEL(test, host, dev);
+	dp_tunnel1 = TB_TEST_DP_TUNNEL1(test, host, dev);
+	dp_tunnel2 = TB_TEST_DP_TUNNEL2(test, host, dev);
+	usb3_tunnel = TB_TEST_USB3_TUNNEL(test, host, dev);
+	dma_tunnel1 = TB_TEST_DMA_TUNNEL1(test, host, dev);
+	dma_tunnel2 = TB_TEST_DMA_TUNNEL2(test, host, dev);
+
 	tb_tunnel_free(dma_tunnel2);
 	tb_tunnel_free(dma_tunnel1);
 	tb_tunnel_free(usb3_tunnel);
diff --git a/drivers/video/backlight/ktd253-backlight.c b/drivers/video/backlight/ktd253-backlight.c
index a7df5bcca9da..37aa5a669530 100644
--- a/drivers/video/backlight/ktd253-backlight.c
+++ b/drivers/video/backlight/ktd253-backlight.c
@@ -25,6 +25,7 @@
 
 #define KTD253_T_LOW_NS (200 + 10) /* Additional 10ns as safety factor */
 #define KTD253_T_HIGH_NS (200 + 10) /* Additional 10ns as safety factor */
+#define KTD253_T_OFF_CRIT_NS 100000 /* 100 us, now it doesn't look good */
 #define KTD253_T_OFF_MS 3
 
 struct ktd253_backlight {
@@ -34,13 +35,50 @@ struct ktd253_backlight {
 	u16 ratio;
 };
 
+static void ktd253_backlight_set_max_ratio(struct ktd253_backlight *ktd253)
+{
+	gpiod_set_value_cansleep(ktd253->gpiod, 1);
+	ndelay(KTD253_T_HIGH_NS);
+	/* We always fall back to this when we power on */
+}
+
+static int ktd253_backlight_stepdown(struct ktd253_backlight *ktd253)
+{
+	/*
+	 * These GPIO operations absolutely can NOT sleep so no _cansleep
+	 * suffixes, and no using GPIO expanders on slow buses for this!
+	 *
+	 * The maximum number of cycles of the loop is 32  so the time taken
+	 * should nominally be:
+	 * (T_LOW_NS + T_HIGH_NS + loop_time) * 32
+	 *
+	 * Architectures do not always support ndelay() and we will get a few us
+	 * instead. If we get to a critical time limit an interrupt has likely
+	 * occured in the low part of the loop and we need to restart from the
+	 * top so we have the backlight in a known state.
+	 */
+	u64 ns;
+
+	ns = ktime_get_ns();
+	gpiod_set_value(ktd253->gpiod, 0);
+	ndelay(KTD253_T_LOW_NS);
+	gpiod_set_value(ktd253->gpiod, 1);
+	ns = ktime_get_ns() - ns;
+	if (ns >= KTD253_T_OFF_CRIT_NS) {
+		dev_err(ktd253->dev, "PCM on backlight took too long (%llu ns)\n", ns);
+		return -EAGAIN;
+	}
+	ndelay(KTD253_T_HIGH_NS);
+	return 0;
+}
+
 static int ktd253_backlight_update_status(struct backlight_device *bl)
 {
 	struct ktd253_backlight *ktd253 = bl_get_data(bl);
 	int brightness = backlight_get_brightness(bl);
 	u16 target_ratio;
 	u16 current_ratio = ktd253->ratio;
-	unsigned long flags;
+	int ret;
 
 	dev_dbg(ktd253->dev, "new brightness/ratio: %d/32\n", brightness);
 
@@ -62,37 +100,34 @@ static int ktd253_backlight_update_status(struct backlight_device *bl)
 	}
 
 	if (current_ratio == 0) {
-		gpiod_set_value_cansleep(ktd253->gpiod, 1);
-		ndelay(KTD253_T_HIGH_NS);
-		/* We always fall back to this when we power on */
+		ktd253_backlight_set_max_ratio(ktd253);
 		current_ratio = KTD253_MAX_RATIO;
 	}
 
-	/*
-	 * WARNING:
-	 * The loop to set the correct current level is performed
-	 * with interrupts disabled as it is timing critical.
-	 * The maximum number of cycles of the loop is 32
-	 * so the time taken will be (T_LOW_NS + T_HIGH_NS + loop_time) * 32,
-	 */
-	local_irq_save(flags);
 	while (current_ratio != target_ratio) {
 		/*
 		 * These GPIO operations absolutely can NOT sleep so no
 		 * _cansleep suffixes, and no using GPIO expanders on
 		 * slow buses for this!
 		 */
-		gpiod_set_value(ktd253->gpiod, 0);
-		ndelay(KTD253_T_LOW_NS);
-		gpiod_set_value(ktd253->gpiod, 1);
-		ndelay(KTD253_T_HIGH_NS);
-		/* After 1/32 we loop back to 32/32 */
-		if (current_ratio == KTD253_MIN_RATIO)
+		ret = ktd253_backlight_stepdown(ktd253);
+		if (ret == -EAGAIN) {
+			/*
+			 * Something disturbed the backlight setting code when
+			 * running so we need to bring the PWM back to a known
+			 * state. This shouldn't happen too much.
+			 */
+			gpiod_set_value_cansleep(ktd253->gpiod, 0);
+			msleep(KTD253_T_OFF_MS);
+			ktd253_backlight_set_max_ratio(ktd253);
+			current_ratio = KTD253_MAX_RATIO;
+		} else if (current_ratio == KTD253_MIN_RATIO) {
+			/* After 1/32 we loop back to 32/32 */
 			current_ratio = KTD253_MAX_RATIO;
-		else
+		} else {
 			current_ratio--;
+		}
 	}
-	local_irq_restore(flags);
 	ktd253->ratio = current_ratio;
 
 	dev_dbg(ktd253->dev, "new ratio set to %d/32\n", target_ratio);
diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c
index e48fded3e414..8d8959a70e44 100644
--- a/drivers/video/backlight/pwm_bl.c
+++ b/drivers/video/backlight/pwm_bl.c
@@ -409,6 +409,33 @@ static bool pwm_backlight_is_linear(struct platform_pwm_backlight_data *data)
 static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 {
 	struct device_node *node = pb->dev->of_node;
+	bool active = true;
+
+	/*
+	 * If the enable GPIO is present, observable (either as input
+	 * or output) and off then the backlight is not currently active.
+	 * */
+	if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
+		active = false;
+
+	if (!regulator_is_enabled(pb->power_supply))
+		active = false;
+
+	if (!pwm_is_enabled(pb->pwm))
+		active = false;
+
+	/*
+	 * Synchronize the enable_gpio with the observed state of the
+	 * hardware.
+	 */
+	if (pb->enable_gpio)
+		gpiod_direction_output(pb->enable_gpio, active);
+
+	/*
+	 * Do not change pb->enabled here! pb->enabled essentially
+	 * tells us if we own one of the regulator's use counts and
+	 * right now we do not.
+	 */
 
 	/* Not booted with device tree or no phandle link to the node */
 	if (!node || !node->phandle)
@@ -420,20 +447,7 @@ static int pwm_backlight_initial_power_state(const struct pwm_bl_data *pb)
 	 * assume that another driver will enable the backlight at the
 	 * appropriate time. Therefore, if it is disabled, keep it so.
 	 */
-
-	/* if the enable GPIO is disabled, do not enable the backlight */
-	if (pb->enable_gpio && gpiod_get_value_cansleep(pb->enable_gpio) == 0)
-		return FB_BLANK_POWERDOWN;
-
-	/* The regulator is disabled, do not enable the backlight */
-	if (!regulator_is_enabled(pb->power_supply))
-		return FB_BLANK_POWERDOWN;
-
-	/* The PWM is disabled, keep it like this */
-	if (!pwm_is_enabled(pb->pwm))
-		return FB_BLANK_POWERDOWN;
-
-	return FB_BLANK_UNBLANK;
+	return active ? FB_BLANK_UNBLANK: FB_BLANK_POWERDOWN;
 }
 
 static int pwm_backlight_probe(struct platform_device *pdev)
@@ -486,18 +500,6 @@ static int pwm_backlight_probe(struct platform_device *pdev)
 		goto err_alloc;
 	}
 
-	/*
-	 * If the GPIO is not known to be already configured as output, that
-	 * is, if gpiod_get_direction returns either 1 or -EINVAL, change the
-	 * direction to output and set the GPIO as active.
-	 * Do not force the GPIO to active when it was already output as it
-	 * could cause backlight flickering or we would enable the backlight too
-	 * early. Leave the decision of the initial backlight state for later.
-	 */
-	if (pb->enable_gpio &&
-	    gpiod_get_direction(pb->enable_gpio) != 0)
-		gpiod_direction_output(pb->enable_gpio, 1);
-
 	pb->power_supply = devm_regulator_get(&pdev->dev, "power");
 	if (IS_ERR(pb->power_supply)) {
 		ret = PTR_ERR(pb->power_supply);
diff --git a/drivers/video/fbdev/core/fbmem.c b/drivers/video/fbdev/core/fbmem.c
index 71fb710f1ce3..7420d2c16e47 100644
--- a/drivers/video/fbdev/core/fbmem.c
+++ b/drivers/video/fbdev/core/fbmem.c
@@ -962,6 +962,7 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 	struct fb_var_screeninfo old_var;
 	struct fb_videomode mode;
 	struct fb_event event;
+	u32 unused;
 
 	if (var->activate & FB_ACTIVATE_INV_MODE) {
 		struct fb_videomode mode1, mode2;
@@ -1008,6 +1009,11 @@ fb_set_var(struct fb_info *info, struct fb_var_screeninfo *var)
 	if (var->xres < 8 || var->yres < 8)
 		return -EINVAL;
 
+	/* Too huge resolution causes multiplication overflow. */
+	if (check_mul_overflow(var->xres, var->yres, &unused) ||
+	    check_mul_overflow(var->xres_virtual, var->yres_virtual, &unused))
+		return -EINVAL;
+
 	ret = info->fbops->fb_check_var(var, info);
 
 	if (ret)
diff --git a/drivers/virtio/virtio_mem.c b/drivers/virtio/virtio_mem.c
index b91bc810a87e..bef8ad6bf466 100644
--- a/drivers/virtio/virtio_mem.c
+++ b/drivers/virtio/virtio_mem.c
@@ -143,6 +143,8 @@ struct virtio_mem {
 	 * add_memory_driver_managed().
 	 */
 	const char *resource_name;
+	/* Memory group identification. */
+	int mgid;
 
 	/*
 	 * We don't want to add too much memory if it's not getting onlined,
@@ -626,8 +628,8 @@ static int virtio_mem_add_memory(struct virtio_mem *vm, uint64_t addr,
 		addr + size - 1);
 	/* Memory might get onlined immediately. */
 	atomic64_add(size, &vm->offline_size);
-	rc = add_memory_driver_managed(vm->nid, addr, size, vm->resource_name,
-				       MHP_MERGE_RESOURCE);
+	rc = add_memory_driver_managed(vm->mgid, addr, size, vm->resource_name,
+				       MHP_MERGE_RESOURCE | MHP_NID_IS_MGID);
 	if (rc) {
 		atomic64_sub(size, &vm->offline_size);
 		dev_warn(&vm->vdev->dev, "adding memory failed: %d\n", rc);
@@ -677,7 +679,7 @@ static int virtio_mem_remove_memory(struct virtio_mem *vm, uint64_t addr,
 
 	dev_dbg(&vm->vdev->dev, "removing memory: 0x%llx - 0x%llx\n", addr,
 		addr + size - 1);
-	rc = remove_memory(vm->nid, addr, size);
+	rc = remove_memory(addr, size);
 	if (!rc) {
 		atomic64_sub(size, &vm->offline_size);
 		/*
@@ -720,7 +722,7 @@ static int virtio_mem_offline_and_remove_memory(struct virtio_mem *vm,
 		"offlining and removing memory: 0x%llx - 0x%llx\n", addr,
 		addr + size - 1);
 
-	rc = offline_and_remove_memory(vm->nid, addr, size);
+	rc = offline_and_remove_memory(addr, size);
 	if (!rc) {
 		atomic64_sub(size, &vm->offline_size);
 		/*
@@ -2569,6 +2571,7 @@ static bool virtio_mem_has_memory_added(struct virtio_mem *vm)
 static int virtio_mem_probe(struct virtio_device *vdev)
 {
 	struct virtio_mem *vm;
+	uint64_t unit_pages;
 	int rc;
 
 	BUILD_BUG_ON(sizeof(struct virtio_mem_req) != 24);
@@ -2603,6 +2606,16 @@ static int virtio_mem_probe(struct virtio_device *vdev)
 	if (rc)
 		goto out_del_vq;
 
+	/* use a single dynamic memory group to cover the whole memory device */
+	if (vm->in_sbm)
+		unit_pages = PHYS_PFN(memory_block_size_bytes());
+	else
+		unit_pages = PHYS_PFN(vm->bbm.bb_size);
+	rc = memory_group_register_dynamic(vm->nid, unit_pages);
+	if (rc < 0)
+		goto out_del_resource;
+	vm->mgid = rc;
+
 	/*
 	 * If we still have memory plugged, we have to unplug all memory first.
 	 * Registering our parent resource makes sure that this memory isn't
@@ -2617,7 +2630,7 @@ static int virtio_mem_probe(struct virtio_device *vdev)
 	vm->memory_notifier.notifier_call = virtio_mem_memory_notifier_cb;
 	rc = register_memory_notifier(&vm->memory_notifier);
 	if (rc)
-		goto out_del_resource;
+		goto out_unreg_group;
 	rc = register_virtio_mem_device(vm);
 	if (rc)
 		goto out_unreg_mem;
@@ -2631,6 +2644,8 @@ static int virtio_mem_probe(struct virtio_device *vdev)
 	return 0;
 out_unreg_mem:
 	unregister_memory_notifier(&vm->memory_notifier);
+out_unreg_group:
+	memory_group_unregister(vm->mgid);
 out_del_resource:
 	virtio_mem_delete_resource(vm);
 out_del_vq:
@@ -2695,6 +2710,7 @@ static void virtio_mem_remove(struct virtio_device *vdev)
 	} else {
 		virtio_mem_delete_resource(vm);
 		kfree_const(vm->resource_name);
+		memory_group_unregister(vm->mgid);
 	}
 
 	/* remove all tracking data - no locking needed */
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index 0bc7046ab942..b81fe4f7d434 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -168,18 +168,6 @@ config SOFT_WATCHDOG_PRETIMEOUT
 	  watchdog. Be aware that governors might affect the watchdog because it
 	  is purely software, e.g. the panic governor will stall it!
 
-config BD70528_WATCHDOG
-	tristate "ROHM BD70528 PMIC Watchdog"
-	depends on MFD_ROHM_BD70528
-	select WATCHDOG_CORE
-	help
-	  Support for the watchdog in the ROHM BD70528 PMIC. Watchdog trigger
-	  cause system reset.
-
-	  Say Y here to include support for the ROHM BD70528 watchdog.
-	  Alternatively say M to compile the driver as a module,
-	  which will be called bd70528_wdt.
-
 config BD957XMUF_WATCHDOG
 	tristate "ROHM BD9576MUF and BD9573MUF PMIC Watchdog"
 	depends on MFD_ROHM_BD957XMUF
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index abaf2ebd814e..1bd2d6f37c53 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -204,7 +204,6 @@ obj-$(CONFIG_WATCHDOG_SUN4V)		+= sun4v_wdt.o
 obj-$(CONFIG_XEN_WDT) += xen_wdt.o
 
 # Architecture Independent
-obj-$(CONFIG_BD70528_WATCHDOG) += bd70528_wdt.o
 obj-$(CONFIG_BD957XMUF_WATCHDOG) += bd9576_wdt.o
 obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
 obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c
index dec6ca019bea..94907176a0e4 100644
--- a/drivers/watchdog/bcm2835_wdt.c
+++ b/drivers/watchdog/bcm2835_wdt.c
@@ -205,9 +205,13 @@ static int bcm2835_wdt_probe(struct platform_device *pdev)
 	if (err)
 		return err;
 
-	if (pm_power_off == NULL) {
-		pm_power_off = bcm2835_power_off;
-		bcm2835_power_off_wdt = wdt;
+	if (of_device_is_system_power_controller(pdev->dev.parent->of_node)) {
+		if (!pm_power_off) {
+			pm_power_off = bcm2835_power_off;
+			bcm2835_power_off_wdt = wdt;
+		} else {
+			dev_info(dev, "Poweroff handler already present!\n");
+		}
 	}
 
 	dev_info(dev, "Broadcom BCM2835 watchdog timer");
diff --git a/drivers/watchdog/bd70528_wdt.c b/drivers/watchdog/bd70528_wdt.c
deleted file mode 100644
index 0170b37e6674..000000000000
--- a/drivers/watchdog/bd70528_wdt.c
+++ /dev/null
@@ -1,291 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-// Copyright (C) 2018 ROHM Semiconductors
-// ROHM BD70528MWV watchdog driver
-
-#include <linux/bcd.h>
-#include <linux/kernel.h>
-#include <linux/mfd/rohm-bd70528.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/regmap.h>
-#include <linux/watchdog.h>
-
-/*
- * Max time we can set is 1 hour, 59 minutes and 59 seconds
- * and Minimum time is 1 second
- */
-#define WDT_MAX_MS	((2 * 60 * 60 - 1) * 1000)
-#define WDT_MIN_MS	1000
-#define DEFAULT_TIMEOUT	60
-
-#define WD_CTRL_MAGIC1 0x55
-#define WD_CTRL_MAGIC2 0xAA
-
-struct wdtbd70528 {
-	struct device *dev;
-	struct regmap *regmap;
-	struct rohm_regmap_dev *mfd;
-	struct watchdog_device wdt;
-};
-
-/**
- * bd70528_wdt_set - arm or disarm watchdog timer
- *
- * @data:	device data for the PMIC instance we want to operate on
- * @enable:	new state of WDT. zero to disable, non zero to enable
- * @old_state:	previous state of WDT will be filled here
- *
- * Arm or disarm WDT on BD70528 PMIC. Expected to be called only by
- * BD70528 RTC and BD70528 WDT drivers. The rtc_timer_lock must be taken
- * by calling bd70528_wdt_lock before calling bd70528_wdt_set.
- */
-int bd70528_wdt_set(struct rohm_regmap_dev *data, int enable, int *old_state)
-{
-	int ret, i;
-	unsigned int tmp;
-	struct bd70528_data *bd70528 = container_of(data, struct bd70528_data,
-						 chip);
-	u8 wd_ctrl_arr[3] = { WD_CTRL_MAGIC1, WD_CTRL_MAGIC2, 0 };
-	u8 *wd_ctrl = &wd_ctrl_arr[2];
-
-	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
-	if (ret)
-		return ret;
-
-	*wd_ctrl = (u8)tmp;
-
-	if (old_state) {
-		if (*wd_ctrl & BD70528_MASK_WDT_EN)
-			*old_state |= BD70528_WDT_STATE_BIT;
-		else
-			*old_state &= ~BD70528_WDT_STATE_BIT;
-		if ((!enable) == (!(*old_state & BD70528_WDT_STATE_BIT)))
-			return 0;
-	}
-
-	if (enable) {
-		if (*wd_ctrl & BD70528_MASK_WDT_EN)
-			return 0;
-		*wd_ctrl |= BD70528_MASK_WDT_EN;
-	} else {
-		if (*wd_ctrl & BD70528_MASK_WDT_EN)
-			*wd_ctrl &= ~BD70528_MASK_WDT_EN;
-		else
-			return 0;
-	}
-
-	for (i = 0; i < 3; i++) {
-		ret = regmap_write(bd70528->chip.regmap, BD70528_REG_WDT_CTRL,
-				   wd_ctrl_arr[i]);
-		if (ret)
-			return ret;
-	}
-
-	ret = regmap_read(bd70528->chip.regmap, BD70528_REG_WDT_CTRL, &tmp);
-	if ((tmp & BD70528_MASK_WDT_EN) != (*wd_ctrl & BD70528_MASK_WDT_EN)) {
-		dev_err(bd70528->chip.dev,
-			"Watchdog ctrl mismatch (hw) 0x%x (set) 0x%x\n",
-			tmp, *wd_ctrl);
-		ret = -EIO;
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL(bd70528_wdt_set);
-
-/**
- * bd70528_wdt_lock - take WDT lock
- *
- * @data:	device data for the PMIC instance we want to operate on
- *
- * Lock WDT for arming/disarming in order to avoid race condition caused
- * by WDT state changes initiated by WDT and RTC drivers.
- */
-void bd70528_wdt_lock(struct rohm_regmap_dev *data)
-{
-	struct bd70528_data *bd70528 = container_of(data, struct bd70528_data,
-						 chip);
-
-	mutex_lock(&bd70528->rtc_timer_lock);
-}
-EXPORT_SYMBOL(bd70528_wdt_lock);
-
-/**
- * bd70528_wdt_unlock - unlock WDT lock
- *
- * @data:	device data for the PMIC instance we want to operate on
- *
- * Unlock WDT lock which has previously been taken by call to
- * bd70528_wdt_lock.
- */
-void bd70528_wdt_unlock(struct rohm_regmap_dev *data)
-{
-	struct bd70528_data *bd70528 = container_of(data, struct bd70528_data,
-						 chip);
-
-	mutex_unlock(&bd70528->rtc_timer_lock);
-}
-EXPORT_SYMBOL(bd70528_wdt_unlock);
-
-static int bd70528_wdt_set_locked(struct wdtbd70528 *w, int enable)
-{
-	return bd70528_wdt_set(w->mfd, enable, NULL);
-}
-
-static int bd70528_wdt_change(struct wdtbd70528 *w, int enable)
-{
-	int ret;
-
-	bd70528_wdt_lock(w->mfd);
-	ret = bd70528_wdt_set_locked(w, enable);
-	bd70528_wdt_unlock(w->mfd);
-
-	return ret;
-}
-
-static int bd70528_wdt_start(struct watchdog_device *wdt)
-{
-	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
-
-	dev_dbg(w->dev, "WDT ping...\n");
-	return bd70528_wdt_change(w, 1);
-}
-
-static int bd70528_wdt_stop(struct watchdog_device *wdt)
-{
-	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
-
-	dev_dbg(w->dev, "WDT stopping...\n");
-	return bd70528_wdt_change(w, 0);
-}
-
-static int bd70528_wdt_set_timeout(struct watchdog_device *wdt,
-				   unsigned int timeout)
-{
-	unsigned int hours;
-	unsigned int minutes;
-	unsigned int seconds;
-	int ret;
-	struct wdtbd70528 *w = watchdog_get_drvdata(wdt);
-
-	seconds = timeout;
-	hours = timeout / (60 * 60);
-	/* Maximum timeout is 1h 59m 59s => hours is 1 or 0 */
-	if (hours)
-		seconds -= (60 * 60);
-	minutes = seconds / 60;
-	seconds = seconds % 60;
-
-	bd70528_wdt_lock(w->mfd);
-
-	ret = bd70528_wdt_set_locked(w, 0);
-	if (ret)
-		goto out_unlock;
-
-	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_HOUR,
-				 BD70528_MASK_WDT_HOUR, hours);
-	if (ret) {
-		dev_err(w->dev, "Failed to set WDT hours\n");
-		goto out_en_unlock;
-	}
-	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_MINUTE,
-				 BD70528_MASK_WDT_MINUTE, bin2bcd(minutes));
-	if (ret) {
-		dev_err(w->dev, "Failed to set WDT minutes\n");
-		goto out_en_unlock;
-	}
-	ret = regmap_update_bits(w->regmap, BD70528_REG_WDT_SEC,
-				 BD70528_MASK_WDT_SEC, bin2bcd(seconds));
-	if (ret)
-		dev_err(w->dev, "Failed to set WDT seconds\n");
-	else
-		dev_dbg(w->dev, "WDT tmo set to %u\n", timeout);
-
-out_en_unlock:
-	ret = bd70528_wdt_set_locked(w, 1);
-out_unlock:
-	bd70528_wdt_unlock(w->mfd);
-
-	return ret;
-}
-
-static const struct watchdog_info bd70528_wdt_info = {
-	.identity = "bd70528-wdt",
-	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
-};
-
-static const struct watchdog_ops bd70528_wdt_ops = {
-	.start		= bd70528_wdt_start,
-	.stop		= bd70528_wdt_stop,
-	.set_timeout	= bd70528_wdt_set_timeout,
-};
-
-static int bd70528_wdt_probe(struct platform_device *pdev)
-{
-	struct rohm_regmap_dev *bd70528;
-	struct wdtbd70528 *w;
-	int ret;
-	unsigned int reg;
-
-	bd70528 = dev_get_drvdata(pdev->dev.parent);
-	if (!bd70528) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
-	w = devm_kzalloc(&pdev->dev, sizeof(*w), GFP_KERNEL);
-	if (!w)
-		return -ENOMEM;
-
-	w->regmap = bd70528->regmap;
-	w->mfd = bd70528;
-	w->dev = &pdev->dev;
-
-	w->wdt.info = &bd70528_wdt_info;
-	w->wdt.ops =  &bd70528_wdt_ops;
-	w->wdt.min_hw_heartbeat_ms = WDT_MIN_MS;
-	w->wdt.max_hw_heartbeat_ms = WDT_MAX_MS;
-	w->wdt.parent = pdev->dev.parent;
-	w->wdt.timeout = DEFAULT_TIMEOUT;
-	watchdog_set_drvdata(&w->wdt, w);
-	watchdog_init_timeout(&w->wdt, 0, pdev->dev.parent);
-
-	ret = bd70528_wdt_set_timeout(&w->wdt, w->wdt.timeout);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to set the watchdog timeout\n");
-		return ret;
-	}
-
-	bd70528_wdt_lock(w->mfd);
-	ret = regmap_read(w->regmap, BD70528_REG_WDT_CTRL, &reg);
-	bd70528_wdt_unlock(w->mfd);
-
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to get the watchdog state\n");
-		return ret;
-	}
-	if (reg & BD70528_MASK_WDT_EN) {
-		dev_dbg(&pdev->dev, "watchdog was running during probe\n");
-		set_bit(WDOG_HW_RUNNING, &w->wdt.status);
-	}
-
-	ret = devm_watchdog_register_device(&pdev->dev, &w->wdt);
-	if (ret < 0)
-		dev_err(&pdev->dev, "watchdog registration failed: %d\n", ret);
-
-	return ret;
-}
-
-static struct platform_driver bd70528_wdt = {
-	.driver = {
-		.name = "bd70528-wdt"
-	},
-	.probe = bd70528_wdt_probe,
-};
-
-module_platform_driver(bd70528_wdt);
-
-MODULE_AUTHOR("Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>");
-MODULE_DESCRIPTION("BD70528 watchdog driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:bd70528-wdt");
diff --git a/drivers/watchdog/iTCO_wdt.c b/drivers/watchdog/iTCO_wdt.c
index b3f604669e2c..643c6c2d0b72 100644
--- a/drivers/watchdog/iTCO_wdt.c
+++ b/drivers/watchdog/iTCO_wdt.c
@@ -362,7 +362,7 @@ static int iTCO_wdt_set_timeout(struct watchdog_device *wd_dev, unsigned int t)
 	 * Otherwise, the BIOS generally reboots when the SMI triggers.
 	 */
 	if (p->smi_res &&
-	    (SMI_EN(p) & (TCO_EN | GBL_SMI_EN)) != (TCO_EN | GBL_SMI_EN))
+	    (inl(SMI_EN(p)) & (TCO_EN | GBL_SMI_EN)) != (TCO_EN | GBL_SMI_EN))
 		tmrval /= 2;
 
 	/* from the specs: */
diff --git a/drivers/watchdog/imx2_wdt.c b/drivers/watchdog/imx2_wdt.c
index cc86018c5eb5..51bfb796898b 100644
--- a/drivers/watchdog/imx2_wdt.c
+++ b/drivers/watchdog/imx2_wdt.c
@@ -317,6 +317,7 @@ static int __init imx2_wdt_probe(struct platform_device *pdev)
 	watchdog_set_nowayout(wdog, nowayout);
 	watchdog_set_restart_priority(wdog, 128);
 	watchdog_init_timeout(wdog, timeout, dev);
+	watchdog_stop_ping_on_suspend(wdog);
 
 	if (imx2_wdt_is_running(wdev)) {
 		imx2_wdt_set_timeout(wdog, wdog->timeout);
diff --git a/drivers/watchdog/max63xx_wdt.c b/drivers/watchdog/max63xx_wdt.c
index 3a899628a834..9e1541cfae0d 100644
--- a/drivers/watchdog/max63xx_wdt.c
+++ b/drivers/watchdog/max63xx_wdt.c
@@ -26,6 +26,7 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/slab.h>
+#include <linux/property.h>
 
 #define DEFAULT_HEARTBEAT 60
 #define MAX_HEARTBEAT     60
@@ -99,8 +100,8 @@ static const struct max63xx_timeout max6373_table[] = {
 	{ },
 };
 
-static struct max63xx_timeout *
-max63xx_select_timeout(struct max63xx_timeout *table, int value)
+static const struct max63xx_timeout *
+max63xx_select_timeout(const struct max63xx_timeout *table, int value)
 {
 	while (table->twd) {
 		if (value <= table->twd) {
@@ -202,14 +203,17 @@ static int max63xx_wdt_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct max63xx_wdt *wdt;
-	struct max63xx_timeout *table;
+	const struct max63xx_timeout *table;
 	int err;
 
 	wdt = devm_kzalloc(dev, sizeof(*wdt), GFP_KERNEL);
 	if (!wdt)
 		return -ENOMEM;
 
-	table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
+	/* Attempt to use fwnode first */
+	table = device_get_match_data(dev);
+	if (!table)
+		table = (struct max63xx_timeout *)pdev->id_entry->driver_data;
 
 	if (heartbeat < 1 || heartbeat > MAX_HEARTBEAT)
 		heartbeat = DEFAULT_HEARTBEAT;
@@ -255,11 +259,23 @@ static const struct platform_device_id max63xx_id_table[] = {
 };
 MODULE_DEVICE_TABLE(platform, max63xx_id_table);
 
+static const struct of_device_id max63xx_dt_id_table[] = {
+	{ .compatible = "maxim,max6369", .data = max6369_table, },
+	{ .compatible = "maxim,max6370", .data = max6369_table, },
+	{ .compatible = "maxim,max6371", .data = max6371_table, },
+	{ .compatible = "maxim,max6372", .data = max6371_table, },
+	{ .compatible = "maxim,max6373", .data = max6373_table, },
+	{ .compatible = "maxim,max6374", .data = max6373_table, },
+	{ }
+};
+MODULE_DEVICE_TABLE(of, max63xx_dt_id_table);
+
 static struct platform_driver max63xx_wdt_driver = {
 	.probe		= max63xx_wdt_probe,
 	.id_table	= max63xx_id_table,
 	.driver		= {
 		.name	= "max63xx_wdt",
+		.of_match_table = max63xx_dt_id_table,
 	},
 };
 
diff --git a/drivers/watchdog/mpc8xxx_wdt.c b/drivers/watchdog/mpc8xxx_wdt.c
index 2f7ded32e878..1c569be72ea2 100644
--- a/drivers/watchdog/mpc8xxx_wdt.c
+++ b/drivers/watchdog/mpc8xxx_wdt.c
@@ -118,7 +118,7 @@ static struct watchdog_info mpc8xxx_wdt_info = {
 	.identity = "MPC8xxx",
 };
 
-static struct watchdog_ops mpc8xxx_wdt_ops = {
+static const struct watchdog_ops mpc8xxx_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = mpc8xxx_wdt_start,
 	.ping = mpc8xxx_wdt_ping,
diff --git a/drivers/watchdog/mtk_wdt.c b/drivers/watchdog/mtk_wdt.c
index 16b6aff324a7..796fbb048cbe 100644
--- a/drivers/watchdog/mtk_wdt.c
+++ b/drivers/watchdog/mtk_wdt.c
@@ -12,6 +12,7 @@
 #include <dt-bindings/reset-controller/mt2712-resets.h>
 #include <dt-bindings/reset-controller/mt8183-resets.h>
 #include <dt-bindings/reset-controller/mt8192-resets.h>
+#include <dt-bindings/reset/mt8195-resets.h>
 #include <linux/delay.h>
 #include <linux/err.h>
 #include <linux/init.h>
@@ -82,6 +83,10 @@ static const struct mtk_wdt_data mt8192_data = {
 	.toprgu_sw_rst_num = MT8192_TOPRGU_SW_RST_NUM,
 };
 
+static const struct mtk_wdt_data mt8195_data = {
+	.toprgu_sw_rst_num = MT8195_TOPRGU_SW_RST_NUM,
+};
+
 static int toprgu_reset_update(struct reset_controller_dev *rcdev,
 			       unsigned long id, bool assert)
 {
@@ -408,6 +413,7 @@ static const struct of_device_id mtk_wdt_dt_ids[] = {
 	{ .compatible = "mediatek,mt6589-wdt" },
 	{ .compatible = "mediatek,mt8183-wdt", .data = &mt8183_data },
 	{ .compatible = "mediatek,mt8192-wdt", .data = &mt8192_data },
+	{ .compatible = "mediatek,mt8195-wdt", .data = &mt8195_data },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(of, mtk_wdt_dt_ids);
diff --git a/drivers/watchdog/sl28cpld_wdt.c b/drivers/watchdog/sl28cpld_wdt.c
index 2de93298475f..9ce456f09f73 100644
--- a/drivers/watchdog/sl28cpld_wdt.c
+++ b/drivers/watchdog/sl28cpld_wdt.c
@@ -108,7 +108,7 @@ static const struct watchdog_info sl28cpld_wdt_info = {
 	.identity = "sl28cpld watchdog",
 };
 
-static struct watchdog_ops sl28cpld_wdt_ops = {
+static const struct watchdog_ops sl28cpld_wdt_ops = {
 	.owner = THIS_MODULE,
 	.start = sl28cpld_wdt_start,
 	.stop = sl28cpld_wdt_stop,
diff --git a/drivers/watchdog/tqmx86_wdt.c b/drivers/watchdog/tqmx86_wdt.c
index 72d0b0adde38..83860e94ce9d 100644
--- a/drivers/watchdog/tqmx86_wdt.c
+++ b/drivers/watchdog/tqmx86_wdt.c
@@ -62,7 +62,7 @@ static const struct watchdog_info tqmx86_wdt_info = {
 	.identity	= "TQMx86 Watchdog",
 };
 
-static struct watchdog_ops tqmx86_wdt_ops = {
+static const struct watchdog_ops tqmx86_wdt_ops = {
 	.owner		= THIS_MODULE,
 	.start		= tqmx86_wdt_start,
 	.set_timeout	= tqmx86_wdt_set_timeout,
diff --git a/drivers/watchdog/watchdog_core.c b/drivers/watchdog/watchdog_core.c
index 5df0a22e2cb4..3fe8a7edc252 100644
--- a/drivers/watchdog/watchdog_core.c
+++ b/drivers/watchdog/watchdog_core.c
@@ -34,6 +34,7 @@
 #include <linux/idr.h>		/* For ida_* macros */
 #include <linux/err.h>		/* For IS_ERR macros */
 #include <linux/of.h>		/* For of_get_timeout_sec */
+#include <linux/suspend.h>
 
 #include "watchdog_core.h"	/* For watchdog_dev_register/... */
 
@@ -185,6 +186,33 @@ static int watchdog_restart_notifier(struct notifier_block *nb,
 	return NOTIFY_DONE;
 }
 
+static int watchdog_pm_notifier(struct notifier_block *nb, unsigned long mode,
+				void *data)
+{
+	struct watchdog_device *wdd;
+	int ret = 0;
+
+	wdd = container_of(nb, struct watchdog_device, pm_nb);
+
+	switch (mode) {
+	case PM_HIBERNATION_PREPARE:
+	case PM_RESTORE_PREPARE:
+	case PM_SUSPEND_PREPARE:
+		ret = watchdog_dev_suspend(wdd);
+		break;
+	case PM_POST_HIBERNATION:
+	case PM_POST_RESTORE:
+	case PM_POST_SUSPEND:
+		ret = watchdog_dev_resume(wdd);
+		break;
+	}
+
+	if (ret)
+		return NOTIFY_BAD;
+
+	return NOTIFY_DONE;
+}
+
 /**
  * watchdog_set_restart_priority - Change priority of restart handler
  * @wdd: watchdog device
@@ -292,6 +320,15 @@ static int __watchdog_register_device(struct watchdog_device *wdd)
 				wdd->id, ret);
 	}
 
+	if (test_bit(WDOG_NO_PING_ON_SUSPEND, &wdd->status)) {
+		wdd->pm_nb.notifier_call = watchdog_pm_notifier;
+
+		ret = register_pm_notifier(&wdd->pm_nb);
+		if (ret)
+			pr_warn("watchdog%d: Cannot register pm handler (%d)\n",
+				wdd->id, ret);
+	}
+
 	return 0;
 }
 
diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c
index 3bab32485273..3a3d8b5c7ad5 100644
--- a/drivers/watchdog/watchdog_dev.c
+++ b/drivers/watchdog/watchdog_dev.c
@@ -401,7 +401,7 @@ static int watchdog_set_pretimeout(struct watchdog_device *wdd,
 	if (watchdog_pretimeout_invalid(wdd, timeout))
 		return -EINVAL;
 
-	if (wdd->ops->set_pretimeout)
+	if (wdd->ops->set_pretimeout && (wdd->info->options & WDIOF_PRETIMEOUT))
 		err = wdd->ops->set_pretimeout(wdd, timeout);
 	else
 		wdd->pretimeout = timeout;
@@ -1096,6 +1096,8 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
 		watchdog_stop(wdd);
 	}
 
+	watchdog_hrtimer_pretimeout_stop(wdd);
+
 	mutex_lock(&wd_data->lock);
 	wd_data->wdd = NULL;
 	wdd->wd_data = NULL;
@@ -1103,7 +1105,6 @@ static void watchdog_cdev_unregister(struct watchdog_device *wdd)
 
 	hrtimer_cancel(&wd_data->timer);
 	kthread_cancel_work_sync(&wd_data->work);
-	watchdog_hrtimer_pretimeout_stop(wdd);
 
 	put_device(&wd_data->dev);
 }
@@ -1172,7 +1173,10 @@ int watchdog_set_last_hw_keepalive(struct watchdog_device *wdd,
 
 	wd_data->last_hw_keepalive = ktime_sub(now, ms_to_ktime(last_ping_ms));
 
-	return __watchdog_ping(wdd);
+	if (watchdog_hw_running(wdd) && handle_boot_enabled)
+		return __watchdog_ping(wdd);
+
+	return 0;
 }
 EXPORT_SYMBOL_GPL(watchdog_set_last_hw_keepalive);
 
@@ -1227,6 +1231,53 @@ void __exit watchdog_dev_exit(void)
 	kthread_destroy_worker(watchdog_kworker);
 }
 
+int watchdog_dev_suspend(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	int ret = 0;
+
+	if (!wdd->wd_data)
+		return -ENODEV;
+
+	/* ping for the last time before suspend */
+	mutex_lock(&wd_data->lock);
+	if (watchdog_worker_should_ping(wd_data))
+		ret = __watchdog_ping(wd_data->wdd);
+	mutex_unlock(&wd_data->lock);
+
+	if (ret)
+		return ret;
+
+	/*
+	 * make sure that watchdog worker will not kick in when the wdog is
+	 * suspended
+	 */
+	hrtimer_cancel(&wd_data->timer);
+	kthread_cancel_work_sync(&wd_data->work);
+
+	return 0;
+}
+
+int watchdog_dev_resume(struct watchdog_device *wdd)
+{
+	struct watchdog_core_data *wd_data = wdd->wd_data;
+	int ret = 0;
+
+	if (!wdd->wd_data)
+		return -ENODEV;
+
+	/*
+	 * __watchdog_ping will also retrigger hrtimer and therefore restore the
+	 * ping worker if needed.
+	 */
+	mutex_lock(&wd_data->lock);
+	if (watchdog_worker_should_ping(wd_data))
+		ret = __watchdog_ping(wd_data->wdd);
+	mutex_unlock(&wd_data->lock);
+
+	return ret;
+}
+
 module_param(handle_boot_enabled, bool, 0444);
 MODULE_PARM_DESC(handle_boot_enabled,
 	"Watchdog core auto-updates boot enabled watchdogs before userspace takes over (default="
diff --git a/fs/Kconfig b/fs/Kconfig
index d8207a1b8c44..47af46a573ba 100644
--- a/fs/Kconfig
+++ b/fs/Kconfig
@@ -43,7 +43,7 @@ source "fs/f2fs/Kconfig"
 source "fs/zonefs/Kconfig"
 
 config FS_DAX
-	bool "Direct Access (DAX) support"
+	bool "File system based Direct Access (DAX) support"
 	depends on MMU
 	depends on !(ARM || MIPS || SPARC)
 	select DEV_PAGEMAP_OPS if (ZONE_DEVICE && !FS_DAX_LIMITED)
@@ -53,8 +53,23 @@ config FS_DAX
 	  Direct Access (DAX) can be used on memory-backed block devices.
 	  If the block device supports DAX and the filesystem supports DAX,
 	  then you can avoid using the pagecache to buffer I/Os.  Turning
-	  on this option will compile in support for DAX; you will need to
-	  mount the filesystem using the -o dax option.
+	  on this option will compile in support for DAX.
+
+	  For a DAX device to support file system access it needs to have
+	  struct pages.  For the nfit based NVDIMMs this can be enabled
+	  using the ndctl utility:
+
+		# ndctl create-namespace --force --reconfig=namespace0.0 \
+			--mode=fsdax --map=mem
+
+	  See the 'create-namespace' man page for details on the overhead of
+	  --map=mem:
+	  https://docs.pmem.io/ndctl-user-guide/ndctl-man-pages/ndctl-create-namespace
+
+          For ndctl to work CONFIG_DEV_DAX needs to be enabled as well. For most
+	  file systems DAX support needs to be manually enabled globally or
+	  per-inode using a mount option as well.  See the file documentation in
+	  Documentation/filesystems/dax.rst for details.
 
 	  If you do not have a block device that is capable of using this,
 	  or if unsure, say N.  Saying Y will increase the size of the kernel
@@ -219,8 +234,7 @@ config ARCH_SUPPORTS_HUGETLBFS
 
 config HUGETLBFS
 	bool "HugeTLB file system support"
-	depends on X86 || IA64 || SPARC64 || (S390 && 64BIT) || \
-		   ARCH_SUPPORTS_HUGETLBFS || BROKEN
+	depends on X86 || IA64 || SPARC64 || ARCH_SUPPORTS_HUGETLBFS || BROKEN
 	help
 	  hugetlbfs is a filesystem backing for HugeTLB pages, based on
 	  ramfs. For architectures that support it, say Y here and read
diff --git a/fs/Makefile b/fs/Makefile
index 2f21300851ae..9e712aa5e254 100644
--- a/fs/Makefile
+++ b/fs/Makefile
@@ -17,7 +17,7 @@ obj-y :=	open.o read_write.o file_table.o super.o \
 		kernel_read_file.o remap_range.o
 
 ifeq ($(CONFIG_BLOCK),y)
-obj-y +=	buffer.o block_dev.o direct-io.o mpage.o
+obj-y +=	buffer.o direct-io.o mpage.o
 else
 obj-y +=	no-block.o
 endif
diff --git a/fs/attr.c b/fs/attr.c
index 87ef39db1c34..473d21b3a86d 100644
--- a/fs/attr.c
+++ b/fs/attr.c
@@ -249,6 +249,34 @@ void setattr_copy(struct user_namespace *mnt_userns, struct inode *inode,
 }
 EXPORT_SYMBOL(setattr_copy);
 
+int may_setattr(struct user_namespace *mnt_userns, struct inode *inode,
+		unsigned int ia_valid)
+{
+	int error;
+
+	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
+		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+			return -EPERM;
+	}
+
+	/*
+	 * If utimes(2) and friends are called with times == NULL (or both
+	 * times are UTIME_NOW), then we need to check for write permission
+	 */
+	if (ia_valid & ATTR_TOUCH) {
+		if (IS_IMMUTABLE(inode))
+			return -EPERM;
+
+		if (!inode_owner_or_capable(mnt_userns, inode)) {
+			error = inode_permission(mnt_userns, inode, MAY_WRITE);
+			if (error)
+				return error;
+		}
+	}
+	return 0;
+}
+EXPORT_SYMBOL(may_setattr);
+
 /**
  * notify_change - modify attributes of a filesytem object
  * @mnt_userns:	user namespace of the mount the inode was found from
@@ -290,25 +318,9 @@ int notify_change(struct user_namespace *mnt_userns, struct dentry *dentry,
 
 	WARN_ON_ONCE(!inode_is_locked(inode));
 
-	if (ia_valid & (ATTR_MODE | ATTR_UID | ATTR_GID | ATTR_TIMES_SET)) {
-		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
-			return -EPERM;
-	}
-
-	/*
-	 * If utimes(2) and friends are called with times == NULL (or both
-	 * times are UTIME_NOW), then we need to check for write permission
-	 */
-	if (ia_valid & ATTR_TOUCH) {
-		if (IS_IMMUTABLE(inode))
-			return -EPERM;
-
-		if (!inode_owner_or_capable(mnt_userns, inode)) {
-			error = inode_permission(mnt_userns, inode, MAY_WRITE);
-			if (error)
-				return error;
-		}
-	}
+	error = may_setattr(mnt_userns, inode, ia_valid);
+	if (error)
+		return error;
 
 	if ((ia_valid & ATTR_MODE)) {
 		umode_t amode = attr->ia_mode;
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 2f9515dccce0..355ea88d5c5f 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -3314,6 +3314,30 @@ int __cold open_ctree(struct super_block *sb, struct btrfs_fs_devices *fs_device
 	 */
 	fs_info->compress_type = BTRFS_COMPRESS_ZLIB;
 
+	/*
+	 * Flag our filesystem as having big metadata blocks if they are bigger
+	 * than the page size.
+	 */
+	if (btrfs_super_nodesize(disk_super) > PAGE_SIZE) {
+		if (!(features & BTRFS_FEATURE_INCOMPAT_BIG_METADATA))
+			btrfs_info(fs_info,
+				"flagging fs with big metadata feature");
+		features |= BTRFS_FEATURE_INCOMPAT_BIG_METADATA;
+	}
+
+	/* Set up fs_info before parsing mount options */
+	nodesize = btrfs_super_nodesize(disk_super);
+	sectorsize = btrfs_super_sectorsize(disk_super);
+	stripesize = sectorsize;
+	fs_info->dirty_metadata_batch = nodesize * (1 + ilog2(nr_cpu_ids));
+	fs_info->delalloc_batch = sectorsize * 512 * (1 + ilog2(nr_cpu_ids));
+
+	fs_info->nodesize = nodesize;
+	fs_info->sectorsize = sectorsize;
+	fs_info->sectorsize_bits = ilog2(sectorsize);
+	fs_info->csums_per_leaf = BTRFS_MAX_ITEM_SIZE(fs_info) / fs_info->csum_size;
+	fs_info->stripesize = stripesize;
+
 	ret = btrfs_parse_options(fs_info, options, sb->s_flags);
 	if (ret) {
 		err = ret;
@@ -3341,30 +3365,6 @@ int __cold open_ctree(struct super_block *sb, struct btrfs_fs_devices *fs_device
 		btrfs_info(fs_info, "has skinny extents");
 
 	/*
-	 * flag our filesystem as having big metadata blocks if
-	 * they are bigger than the page size
-	 */
-	if (btrfs_super_nodesize(disk_super) > PAGE_SIZE) {
-		if (!(features & BTRFS_FEATURE_INCOMPAT_BIG_METADATA))
-			btrfs_info(fs_info,
-				"flagging fs with big metadata feature");
-		features |= BTRFS_FEATURE_INCOMPAT_BIG_METADATA;
-	}
-
-	nodesize = btrfs_super_nodesize(disk_super);
-	sectorsize = btrfs_super_sectorsize(disk_super);
-	stripesize = sectorsize;
-	fs_info->dirty_metadata_batch = nodesize * (1 + ilog2(nr_cpu_ids));
-	fs_info->delalloc_batch = sectorsize * 512 * (1 + ilog2(nr_cpu_ids));
-
-	/* Cache block sizes */
-	fs_info->nodesize = nodesize;
-	fs_info->sectorsize = sectorsize;
-	fs_info->sectorsize_bits = ilog2(sectorsize);
-	fs_info->csums_per_leaf = BTRFS_MAX_ITEM_SIZE(fs_info) / fs_info->csum_size;
-	fs_info->stripesize = stripesize;
-
-	/*
 	 * mixed block groups end up with duplicate but slightly offset
 	 * extent buffers for the same range.  It leads to corruptions
 	 */
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 41524f9aeac3..cc61813213d8 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -3223,6 +3223,8 @@ static long btrfs_ioctl_rm_dev_v2(struct file *file, void __user *arg)
 	struct inode *inode = file_inode(file);
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	struct btrfs_ioctl_vol_args_v2 *vol_args;
+	struct block_device *bdev = NULL;
+	fmode_t mode;
 	int ret;
 	bool cancel = false;
 
@@ -3255,9 +3257,9 @@ static long btrfs_ioctl_rm_dev_v2(struct file *file, void __user *arg)
 	/* Exclusive operation is now claimed */
 
 	if (vol_args->flags & BTRFS_DEVICE_SPEC_BY_ID)
-		ret = btrfs_rm_device(fs_info, NULL, vol_args->devid);
+		ret = btrfs_rm_device(fs_info, NULL, vol_args->devid, &bdev, &mode);
 	else
-		ret = btrfs_rm_device(fs_info, vol_args->name, 0);
+		ret = btrfs_rm_device(fs_info, vol_args->name, 0, &bdev, &mode);
 
 	btrfs_exclop_finish(fs_info);
 
@@ -3273,6 +3275,8 @@ out:
 	kfree(vol_args);
 err_drop:
 	mnt_drop_write_file(file);
+	if (bdev)
+		blkdev_put(bdev, mode);
 	return ret;
 }
 
@@ -3281,6 +3285,8 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg)
 	struct inode *inode = file_inode(file);
 	struct btrfs_fs_info *fs_info = btrfs_sb(inode->i_sb);
 	struct btrfs_ioctl_vol_args *vol_args;
+	struct block_device *bdev = NULL;
+	fmode_t mode;
 	int ret;
 	bool cancel;
 
@@ -3302,7 +3308,7 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg)
 	ret = exclop_start_or_cancel_reloc(fs_info, BTRFS_EXCLOP_DEV_REMOVE,
 					   cancel);
 	if (ret == 0) {
-		ret = btrfs_rm_device(fs_info, vol_args->name, 0);
+		ret = btrfs_rm_device(fs_info, vol_args->name, 0, &bdev, &mode);
 		if (!ret)
 			btrfs_info(fs_info, "disk deleted %s", vol_args->name);
 		btrfs_exclop_finish(fs_info);
@@ -3311,7 +3317,8 @@ static long btrfs_ioctl_rm_dev(struct file *file, void __user *arg)
 	kfree(vol_args);
 out_drop_write:
 	mnt_drop_write_file(file);
-
+	if (bdev)
+		blkdev_put(bdev, mode);
 	return ret;
 }
 
diff --git a/fs/btrfs/misc.h b/fs/btrfs/misc.h
index 6461ebc3a1c1..340f995652f2 100644
--- a/fs/btrfs/misc.h
+++ b/fs/btrfs/misc.h
@@ -5,7 +5,7 @@
 
 #include <linux/sched.h>
 #include <linux/wait.h>
-#include <asm/div64.h>
+#include <linux/math64.h>
 #include <linux/rbtree.h>
 
 #define in_range(b, first, len) ((b) >= (first) && (b) < (first) + (len))
diff --git a/fs/btrfs/ordered-data.c b/fs/btrfs/ordered-data.c
index edb65abf0393..6b51fd2ec5ac 100644
--- a/fs/btrfs/ordered-data.c
+++ b/fs/btrfs/ordered-data.c
@@ -1049,6 +1049,7 @@ static int clone_ordered_extent(struct btrfs_ordered_extent *ordered, u64 pos,
 				u64 len)
 {
 	struct inode *inode = ordered->inode;
+	struct btrfs_fs_info *fs_info = BTRFS_I(inode)->root->fs_info;
 	u64 file_offset = ordered->file_offset + pos;
 	u64 disk_bytenr = ordered->disk_bytenr + pos;
 	u64 num_bytes = len;
@@ -1066,6 +1067,13 @@ static int clone_ordered_extent(struct btrfs_ordered_extent *ordered, u64 pos,
 	else
 		type = __ffs(flags_masked);
 
+	/*
+	 * The splitting extent is already counted and will be added again
+	 * in btrfs_add_ordered_extent_*(). Subtract num_bytes to avoid
+	 * double counting.
+	 */
+	percpu_counter_add_batch(&fs_info->ordered_bytes, -num_bytes,
+				 fs_info->delalloc_batch);
 	if (test_bit(BTRFS_ORDERED_COMPRESSED, &ordered->flags)) {
 		WARN_ON_ONCE(1);
 		ret = btrfs_add_ordered_extent_compress(BTRFS_I(inode),
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index ec3a874165de..464485aa7318 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -558,6 +558,8 @@ static int btrfs_free_stale_devices(const char *path,
 	struct btrfs_device *device, *tmp_device;
 	int ret = 0;
 
+	lockdep_assert_held(&uuid_mutex);
+
 	if (path)
 		ret = -ENOENT;
 
@@ -988,11 +990,12 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 	struct btrfs_device *orig_dev;
 	int ret = 0;
 
+	lockdep_assert_held(&uuid_mutex);
+
 	fs_devices = alloc_fs_devices(orig->fsid, NULL);
 	if (IS_ERR(fs_devices))
 		return fs_devices;
 
-	mutex_lock(&orig->device_list_mutex);
 	fs_devices->total_devices = orig->total_devices;
 
 	list_for_each_entry(orig_dev, &orig->devices, dev_list) {
@@ -1024,10 +1027,8 @@ static struct btrfs_fs_devices *clone_fs_devices(struct btrfs_fs_devices *orig)
 		device->fs_devices = fs_devices;
 		fs_devices->num_devices++;
 	}
-	mutex_unlock(&orig->device_list_mutex);
 	return fs_devices;
 error:
-	mutex_unlock(&orig->device_list_mutex);
 	free_fs_devices(fs_devices);
 	return ERR_PTR(ret);
 }
@@ -1869,15 +1870,17 @@ out:
  * Function to update ctime/mtime for a given device path.
  * Mainly used for ctime/mtime based probe like libblkid.
  */
-static void update_dev_time(const char *path_name)
+static void update_dev_time(struct block_device *bdev)
 {
-	struct file *filp;
+	struct inode *inode = bdev->bd_inode;
+	struct timespec64 now;
 
-	filp = filp_open(path_name, O_RDWR, 0);
-	if (IS_ERR(filp))
+	/* Shouldn't happen but just in case. */
+	if (!inode)
 		return;
-	file_update_time(filp);
-	filp_close(filp, NULL);
+
+	now = current_time(inode);
+	generic_update_time(inode, &now, S_MTIME | S_CTIME);
 }
 
 static int btrfs_rm_dev_item(struct btrfs_device *device)
@@ -2053,11 +2056,11 @@ void btrfs_scratch_superblocks(struct btrfs_fs_info *fs_info,
 	btrfs_kobject_uevent(bdev, KOBJ_CHANGE);
 
 	/* Update ctime/mtime for device path for libblkid */
-	update_dev_time(device_path);
+	update_dev_time(bdev);
 }
 
 int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
-		    u64 devid)
+		    u64 devid, struct block_device **bdev, fmode_t *mode)
 {
 	struct btrfs_device *device;
 	struct btrfs_fs_devices *cur_devices;
@@ -2171,15 +2174,26 @@ int btrfs_rm_device(struct btrfs_fs_info *fs_info, const char *device_path,
 	mutex_unlock(&fs_devices->device_list_mutex);
 
 	/*
-	 * at this point, the device is zero sized and detached from
-	 * the devices list.  All that's left is to zero out the old
-	 * supers and free the device.
+	 * At this point, the device is zero sized and detached from the
+	 * devices list.  All that's left is to zero out the old supers and
+	 * free the device.
+	 *
+	 * We cannot call btrfs_close_bdev() here because we're holding the sb
+	 * write lock, and blkdev_put() will pull in the ->open_mutex on the
+	 * block device and it's dependencies.  Instead just flush the device
+	 * and let the caller do the final blkdev_put.
 	 */
-	if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state))
+	if (test_bit(BTRFS_DEV_STATE_WRITEABLE, &device->dev_state)) {
 		btrfs_scratch_superblocks(fs_info, device->bdev,
 					  device->name->str);
+		if (device->bdev) {
+			sync_blockdev(device->bdev);
+			invalidate_bdev(device->bdev);
+		}
+	}
 
-	btrfs_close_bdev(device);
+	*bdev = device->bdev;
+	*mode = device->mode;
 	synchronize_rcu();
 	btrfs_free_device(device);
 
@@ -2706,7 +2720,7 @@ int btrfs_init_new_device(struct btrfs_fs_info *fs_info, const char *device_path
 	btrfs_forget_devices(device_path);
 
 	/* Update ctime/mtime for blkid or udev */
-	update_dev_time(device_path);
+	update_dev_time(bdev);
 
 	return ret;
 
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index b082250b42e0..2183361db614 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -472,7 +472,8 @@ struct btrfs_device *btrfs_alloc_device(struct btrfs_fs_info *fs_info,
 					const u8 *uuid);
 void btrfs_free_device(struct btrfs_device *device);
 int btrfs_rm_device(struct btrfs_fs_info *fs_info,
-		    const char *device_path, u64 devid);
+		    const char *device_path, u64 devid,
+		    struct block_device **bdev, fmode_t *mode);
 void __exit btrfs_cleanup_fs_uuids(void);
 int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len);
 int btrfs_grow_device(struct btrfs_trans_handle *trans,
diff --git a/fs/ceph/addr.c b/fs/ceph/addr.c
index 7e7a897ae0d3..99b80b5c7a93 100644
--- a/fs/ceph/addr.c
+++ b/fs/ceph/addr.c
@@ -1281,8 +1281,8 @@ static int ceph_write_end(struct file *file, struct address_space *mapping,
 	dout("write_end file %p inode %p page %p %d~%d (%d)\n", file,
 	     inode, page, (int)pos, (int)copied, (int)len);
 
-	/* zero the stale part of the page if we did a short copy */
 	if (!PageUptodate(page)) {
+		/* just return that nothing was copied on a short copy */
 		if (copied < len) {
 			copied = 0;
 			goto out;
diff --git a/fs/ceph/cache.h b/fs/ceph/cache.h
index 1409d6149281..058ea2a04376 100644
--- a/fs/ceph/cache.h
+++ b/fs/ceph/cache.h
@@ -26,12 +26,6 @@ void ceph_fscache_unregister_inode_cookie(struct ceph_inode_info* ci);
 void ceph_fscache_file_set_cookie(struct inode *inode, struct file *filp);
 void ceph_fscache_revalidate_cookie(struct ceph_inode_info *ci);
 
-int ceph_readpage_from_fscache(struct inode *inode, struct page *page);
-int ceph_readpages_from_fscache(struct inode *inode,
-				struct address_space *mapping,
-				struct list_head *pages,
-				unsigned *nr_pages);
-
 static inline void ceph_fscache_inode_init(struct ceph_inode_info *ci)
 {
 	ci->fscache = NULL;
diff --git a/fs/ceph/caps.c b/fs/ceph/caps.c
index 39db97f149b9..6c0e52fd0743 100644
--- a/fs/ceph/caps.c
+++ b/fs/ceph/caps.c
@@ -703,29 +703,12 @@ void ceph_add_cap(struct inode *inode,
 		 */
 		struct ceph_snap_realm *realm = ceph_lookup_snap_realm(mdsc,
 							       realmino);
-		if (realm) {
-			struct ceph_snap_realm *oldrealm = ci->i_snap_realm;
-			if (oldrealm) {
-				spin_lock(&oldrealm->inodes_with_caps_lock);
-				list_del_init(&ci->i_snap_realm_item);
-				spin_unlock(&oldrealm->inodes_with_caps_lock);
-			}
-
-			spin_lock(&realm->inodes_with_caps_lock);
-			list_add(&ci->i_snap_realm_item,
-				 &realm->inodes_with_caps);
-			ci->i_snap_realm = realm;
-			if (realm->ino == ci->i_vino.ino)
-				realm->inode = inode;
-			spin_unlock(&realm->inodes_with_caps_lock);
-
-			if (oldrealm)
-				ceph_put_snap_realm(mdsc, oldrealm);
-		} else {
-			pr_err("ceph_add_cap: couldn't find snap realm %llx\n",
-			       realmino);
-			WARN_ON(!realm);
-		}
+		if (realm)
+			ceph_change_snap_realm(inode, realm);
+		else
+			WARN(1, "%s: couldn't find snap realm 0x%llx (ino 0x%llx oldrealm 0x%llx)\n",
+			     __func__, realmino, ci->i_vino.ino,
+			     ci->i_snap_realm ? ci->i_snap_realm->ino : 0);
 	}
 
 	__check_cap_issue(ci, cap, issued);
@@ -1112,20 +1095,6 @@ int ceph_is_any_caps(struct inode *inode)
 	return ret;
 }
 
-static void drop_inode_snap_realm(struct ceph_inode_info *ci)
-{
-	struct ceph_snap_realm *realm = ci->i_snap_realm;
-	spin_lock(&realm->inodes_with_caps_lock);
-	list_del_init(&ci->i_snap_realm_item);
-	ci->i_snap_realm_counter++;
-	ci->i_snap_realm = NULL;
-	if (realm->ino == ci->i_vino.ino)
-		realm->inode = NULL;
-	spin_unlock(&realm->inodes_with_caps_lock);
-	ceph_put_snap_realm(ceph_sb_to_client(ci->vfs_inode.i_sb)->mdsc,
-			    realm);
-}
-
 /*
  * Remove a cap.  Take steps to deal with a racing iterate_session_caps.
  *
@@ -1145,17 +1114,16 @@ void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
 		return;
 	}
 
+	lockdep_assert_held(&ci->i_ceph_lock);
+
 	dout("__ceph_remove_cap %p from %p\n", cap, &ci->vfs_inode);
 
 	mdsc = ceph_inode_to_client(&ci->vfs_inode)->mdsc;
 
 	/* remove from inode's cap rbtree, and clear auth cap */
 	rb_erase(&cap->ci_node, &ci->i_caps);
-	if (ci->i_auth_cap == cap) {
-		WARN_ON_ONCE(!list_empty(&ci->i_dirty_item) &&
-			     !mdsc->fsc->blocklisted);
+	if (ci->i_auth_cap == cap)
 		ci->i_auth_cap = NULL;
-	}
 
 	/* remove from session list */
 	spin_lock(&session->s_cap_lock);
@@ -1201,12 +1169,34 @@ void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
 		 * keep i_snap_realm.
 		 */
 		if (ci->i_wr_ref == 0 && ci->i_snap_realm)
-			drop_inode_snap_realm(ci);
+			ceph_change_snap_realm(&ci->vfs_inode, NULL);
 
 		__cap_delay_cancel(mdsc, ci);
 	}
 }
 
+void ceph_remove_cap(struct ceph_cap *cap, bool queue_release)
+{
+	struct ceph_inode_info *ci = cap->ci;
+	struct ceph_fs_client *fsc;
+
+	/* 'ci' being NULL means the remove have already occurred */
+	if (!ci) {
+		dout("%s: cap inode is NULL\n", __func__);
+		return;
+	}
+
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	fsc = ceph_sb_to_client(ci->vfs_inode.i_sb);
+	WARN_ON_ONCE(ci->i_auth_cap == cap &&
+		     !list_empty(&ci->i_dirty_item) &&
+		     !fsc->blocklisted &&
+		     READ_ONCE(fsc->mount_state) != CEPH_MOUNT_SHUTDOWN);
+
+	__ceph_remove_cap(cap, queue_release);
+}
+
 struct cap_msg_args {
 	struct ceph_mds_session	*session;
 	u64			ino, cid, follows;
@@ -1335,7 +1325,7 @@ void __ceph_remove_caps(struct ceph_inode_info *ci)
 	while (p) {
 		struct ceph_cap *cap = rb_entry(p, struct ceph_cap, ci_node);
 		p = rb_next(p);
-		__ceph_remove_cap(cap, true);
+		ceph_remove_cap(cap, true);
 	}
 	spin_unlock(&ci->i_ceph_lock);
 }
@@ -1746,6 +1736,9 @@ struct ceph_cap_flush *ceph_alloc_cap_flush(void)
 	struct ceph_cap_flush *cf;
 
 	cf = kmem_cache_alloc(ceph_cap_flush_cachep, GFP_KERNEL);
+	if (!cf)
+		return NULL;
+
 	cf->is_capsnap = false;
 	return cf;
 }
@@ -1856,6 +1849,8 @@ static u64 __mark_caps_flushing(struct inode *inode,
  * try to invalidate mapping pages without blocking.
  */
 static int try_nonblocking_invalidate(struct inode *inode)
+	__releases(ci->i_ceph_lock)
+	__acquires(ci->i_ceph_lock)
 {
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	u32 invalidating_gen = ci->i_rdcache_gen;
@@ -2219,6 +2214,7 @@ static int caps_are_flushed(struct inode *inode, u64 flush_tid)
  */
 static int unsafe_request_wait(struct inode *inode)
 {
+	struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	struct ceph_mds_request *req1 = NULL, *req2 = NULL;
 	int ret, err = 0;
@@ -2238,6 +2234,81 @@ static int unsafe_request_wait(struct inode *inode)
 	}
 	spin_unlock(&ci->i_unsafe_lock);
 
+	/*
+	 * Trigger to flush the journal logs in all the relevant MDSes
+	 * manually, or in the worst case we must wait at most 5 seconds
+	 * to wait the journal logs to be flushed by the MDSes periodically.
+	 */
+	if (req1 || req2) {
+		struct ceph_mds_session **sessions = NULL;
+		struct ceph_mds_session *s;
+		struct ceph_mds_request *req;
+		unsigned int max;
+		int i;
+
+		/*
+		 * The mdsc->max_sessions is unlikely to be changed
+		 * mostly, here we will retry it by reallocating the
+		 * sessions arrary memory to get rid of the mdsc->mutex
+		 * lock.
+		 */
+retry:
+		max = mdsc->max_sessions;
+		sessions = krealloc(sessions, max * sizeof(s), __GFP_ZERO);
+		if (!sessions)
+			return -ENOMEM;
+
+		spin_lock(&ci->i_unsafe_lock);
+		if (req1) {
+			list_for_each_entry(req, &ci->i_unsafe_dirops,
+					    r_unsafe_dir_item) {
+				s = req->r_session;
+				if (unlikely(s->s_mds > max)) {
+					spin_unlock(&ci->i_unsafe_lock);
+					goto retry;
+				}
+				if (!sessions[s->s_mds]) {
+					s = ceph_get_mds_session(s);
+					sessions[s->s_mds] = s;
+				}
+			}
+		}
+		if (req2) {
+			list_for_each_entry(req, &ci->i_unsafe_iops,
+					    r_unsafe_target_item) {
+				s = req->r_session;
+				if (unlikely(s->s_mds > max)) {
+					spin_unlock(&ci->i_unsafe_lock);
+					goto retry;
+				}
+				if (!sessions[s->s_mds]) {
+					s = ceph_get_mds_session(s);
+					sessions[s->s_mds] = s;
+				}
+			}
+		}
+		spin_unlock(&ci->i_unsafe_lock);
+
+		/* the auth MDS */
+		spin_lock(&ci->i_ceph_lock);
+		if (ci->i_auth_cap) {
+		      s = ci->i_auth_cap->session;
+		      if (!sessions[s->s_mds])
+			      sessions[s->s_mds] = ceph_get_mds_session(s);
+		}
+		spin_unlock(&ci->i_ceph_lock);
+
+		/* send flush mdlog request to MDSes */
+		for (i = 0; i < max; i++) {
+			s = sessions[i];
+			if (s) {
+				send_flush_mdlog(s);
+				ceph_put_mds_session(s);
+			}
+		}
+		kfree(sessions);
+	}
+
 	dout("unsafe_request_wait %p wait on tid %llu %llu\n",
 	     inode, req1 ? req1->r_tid : 0ULL, req2 ? req2->r_tid : 0ULL);
 	if (req1) {
@@ -3008,7 +3079,7 @@ static void __ceph_put_cap_refs(struct ceph_inode_info *ci, int had,
 			}
 			/* see comment in __ceph_remove_cap() */
 			if (!__ceph_is_any_real_caps(ci) && ci->i_snap_realm)
-				drop_inode_snap_realm(ci);
+				ceph_change_snap_realm(inode, NULL);
 		}
 	}
 	if (check_flushsnaps && __ceph_have_pending_cap_snap(ci)) {
@@ -3114,7 +3185,16 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 				break;
 			}
 		}
-		BUG_ON(!found);
+
+		if (!found) {
+			/*
+			 * The capsnap should already be removed when removing
+			 * auth cap in the case of a forced unmount.
+			 */
+			WARN_ON_ONCE(ci->i_auth_cap);
+			goto unlock;
+		}
+
 		capsnap->dirty_pages -= nr;
 		if (capsnap->dirty_pages == 0) {
 			complete_capsnap = true;
@@ -3136,6 +3216,7 @@ void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 		     complete_capsnap ? " (complete capsnap)" : "");
 	}
 
+unlock:
 	spin_unlock(&ci->i_ceph_lock);
 
 	if (last) {
@@ -3606,6 +3687,43 @@ out:
 		iput(inode);
 }
 
+void __ceph_remove_capsnap(struct inode *inode, struct ceph_cap_snap *capsnap,
+			   bool *wake_ci, bool *wake_mdsc)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_mds_client *mdsc = ceph_sb_to_client(inode->i_sb)->mdsc;
+	bool ret;
+
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	dout("removing capsnap %p, inode %p ci %p\n", capsnap, inode, ci);
+
+	list_del_init(&capsnap->ci_item);
+	ret = __detach_cap_flush_from_ci(ci, &capsnap->cap_flush);
+	if (wake_ci)
+		*wake_ci = ret;
+
+	spin_lock(&mdsc->cap_dirty_lock);
+	if (list_empty(&ci->i_cap_flush_list))
+		list_del_init(&ci->i_flushing_item);
+
+	ret = __detach_cap_flush_from_mdsc(mdsc, &capsnap->cap_flush);
+	if (wake_mdsc)
+		*wake_mdsc = ret;
+	spin_unlock(&mdsc->cap_dirty_lock);
+}
+
+void ceph_remove_capsnap(struct inode *inode, struct ceph_cap_snap *capsnap,
+			 bool *wake_ci, bool *wake_mdsc)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	WARN_ON_ONCE(capsnap->dirty_pages || capsnap->writing);
+	__ceph_remove_capsnap(inode, capsnap, wake_ci, wake_mdsc);
+}
+
 /*
  * Handle FLUSHSNAP_ACK.  MDS has flushed snap data to disk and we can
  * throw away our cap_snap.
@@ -3643,23 +3761,10 @@ static void handle_cap_flushsnap_ack(struct inode *inode, u64 flush_tid,
 			     capsnap, capsnap->follows);
 		}
 	}
-	if (flushed) {
-		WARN_ON(capsnap->dirty_pages || capsnap->writing);
-		dout(" removing %p cap_snap %p follows %lld\n",
-		     inode, capsnap, follows);
-		list_del(&capsnap->ci_item);
-		wake_ci |= __detach_cap_flush_from_ci(ci, &capsnap->cap_flush);
-
-		spin_lock(&mdsc->cap_dirty_lock);
-
-		if (list_empty(&ci->i_cap_flush_list))
-			list_del_init(&ci->i_flushing_item);
-
-		wake_mdsc |= __detach_cap_flush_from_mdsc(mdsc,
-							  &capsnap->cap_flush);
-		spin_unlock(&mdsc->cap_dirty_lock);
-	}
+	if (flushed)
+		ceph_remove_capsnap(inode, capsnap, &wake_ci, &wake_mdsc);
 	spin_unlock(&ci->i_ceph_lock);
+
 	if (flushed) {
 		ceph_put_snap_context(capsnap->context);
 		ceph_put_cap_snap(capsnap);
@@ -3743,7 +3848,7 @@ retry:
 		goto out_unlock;
 
 	if (target < 0) {
-		__ceph_remove_cap(cap, false);
+		ceph_remove_cap(cap, false);
 		goto out_unlock;
 	}
 
@@ -3778,7 +3883,7 @@ retry:
 				change_auth_cap_ses(ci, tcap->session);
 			}
 		}
-		__ceph_remove_cap(cap, false);
+		ceph_remove_cap(cap, false);
 		goto out_unlock;
 	} else if (tsession) {
 		/* add placeholder for the export tagert */
@@ -3795,7 +3900,7 @@ retry:
 			spin_unlock(&mdsc->cap_dirty_lock);
 		}
 
-		__ceph_remove_cap(cap, false);
+		ceph_remove_cap(cap, false);
 		goto out_unlock;
 	}
 
@@ -3906,7 +4011,7 @@ retry:
 					ocap->mseq, mds, le32_to_cpu(ph->seq),
 					le32_to_cpu(ph->mseq));
 		}
-		__ceph_remove_cap(ocap, (ph->flags & CEPH_CAP_FLAG_RELEASE));
+		ceph_remove_cap(ocap, (ph->flags & CEPH_CAP_FLAG_RELEASE));
 	}
 
 	*old_issued = issued;
@@ -4134,8 +4239,9 @@ void ceph_handle_caps(struct ceph_mds_session *session,
 done:
 	mutex_unlock(&session->s_mutex);
 done_unlocked:
-	ceph_put_string(extra_info.pool_ns);
 	iput(inode);
+out:
+	ceph_put_string(extra_info.pool_ns);
 	return;
 
 flush_cap_releases:
@@ -4150,7 +4256,7 @@ flush_cap_releases:
 bad:
 	pr_err("ceph_handle_caps: corrupt message\n");
 	ceph_msg_dump(msg);
-	return;
+	goto out;
 }
 
 /*
@@ -4225,33 +4331,9 @@ static void flush_dirty_session_caps(struct ceph_mds_session *s)
 	dout("flush_dirty_caps done\n");
 }
 
-static void iterate_sessions(struct ceph_mds_client *mdsc,
-			     void (*cb)(struct ceph_mds_session *))
-{
-	int mds;
-
-	mutex_lock(&mdsc->mutex);
-	for (mds = 0; mds < mdsc->max_sessions; ++mds) {
-		struct ceph_mds_session *s;
-
-		if (!mdsc->sessions[mds])
-			continue;
-
-		s = ceph_get_mds_session(mdsc->sessions[mds]);
-		if (!s)
-			continue;
-
-		mutex_unlock(&mdsc->mutex);
-		cb(s);
-		ceph_put_mds_session(s);
-		mutex_lock(&mdsc->mutex);
-	}
-	mutex_unlock(&mdsc->mutex);
-}
-
 void ceph_flush_dirty_caps(struct ceph_mds_client *mdsc)
 {
-	iterate_sessions(mdsc, flush_dirty_session_caps);
+	ceph_mdsc_iterate_sessions(mdsc, flush_dirty_session_caps, true);
 }
 
 void __ceph_touch_fmode(struct ceph_inode_info *ci,
diff --git a/fs/ceph/file.c b/fs/ceph/file.c
index e1d605a02d4a..d16fd2d5fd42 100644
--- a/fs/ceph/file.c
+++ b/fs/ceph/file.c
@@ -1722,32 +1722,26 @@ retry_snap:
 		goto out;
 	}
 
-	err = file_remove_privs(file);
-	if (err)
+	down_read(&osdc->lock);
+	map_flags = osdc->osdmap->flags;
+	pool_flags = ceph_pg_pool_flags(osdc->osdmap, ci->i_layout.pool_id);
+	up_read(&osdc->lock);
+	if ((map_flags & CEPH_OSDMAP_FULL) ||
+	    (pool_flags & CEPH_POOL_FLAG_FULL)) {
+		err = -ENOSPC;
 		goto out;
+	}
 
-	err = file_update_time(file);
+	err = file_remove_privs(file);
 	if (err)
 		goto out;
 
-	inode_inc_iversion_raw(inode);
-
 	if (ci->i_inline_version != CEPH_INLINE_NONE) {
 		err = ceph_uninline_data(file, NULL);
 		if (err < 0)
 			goto out;
 	}
 
-	down_read(&osdc->lock);
-	map_flags = osdc->osdmap->flags;
-	pool_flags = ceph_pg_pool_flags(osdc->osdmap, ci->i_layout.pool_id);
-	up_read(&osdc->lock);
-	if ((map_flags & CEPH_OSDMAP_FULL) ||
-	    (pool_flags & CEPH_POOL_FLAG_FULL)) {
-		err = -ENOSPC;
-		goto out;
-	}
-
 	dout("aio_write %p %llx.%llx %llu~%zd getting caps. i_size %llu\n",
 	     inode, ceph_vinop(inode), pos, count, i_size_read(inode));
 	if (fi->fmode & CEPH_FILE_MODE_LAZY)
@@ -1759,6 +1753,12 @@ retry_snap:
 	if (err < 0)
 		goto out;
 
+	err = file_update_time(file);
+	if (err)
+		goto out_caps;
+
+	inode_inc_iversion_raw(inode);
+
 	dout("aio_write %p %llx.%llx %llu~%zd got cap refs on %s\n",
 	     inode, ceph_vinop(inode), pos, count, ceph_cap_string(got));
 
@@ -1842,6 +1842,8 @@ retry_snap:
 	}
 
 	goto out_unlocked;
+out_caps:
+	ceph_put_cap_refs(ci, got);
 out:
 	if (direct_lock)
 		ceph_end_io_direct(inode);
diff --git a/fs/ceph/inode.c b/fs/ceph/inode.c
index 1bd2cc015913..2df1e1284451 100644
--- a/fs/ceph/inode.c
+++ b/fs/ceph/inode.c
@@ -581,16 +581,9 @@ void ceph_evict_inode(struct inode *inode)
 	 */
 	if (ci->i_snap_realm) {
 		if (ceph_snap(inode) == CEPH_NOSNAP) {
-			struct ceph_snap_realm *realm = ci->i_snap_realm;
 			dout(" dropping residual ref to snap realm %p\n",
-			     realm);
-			spin_lock(&realm->inodes_with_caps_lock);
-			list_del_init(&ci->i_snap_realm_item);
-			ci->i_snap_realm = NULL;
-			if (realm->ino == ci->i_vino.ino)
-				realm->inode = NULL;
-			spin_unlock(&realm->inodes_with_caps_lock);
-			ceph_put_snap_realm(mdsc, realm);
+			     ci->i_snap_realm);
+			ceph_change_snap_realm(inode, NULL);
 		} else {
 			ceph_put_snapid_map(mdsc, ci->i_snapid_map);
 			ci->i_snap_realm = NULL;
diff --git a/fs/ceph/mds_client.c b/fs/ceph/mds_client.c
index 0b69aec23e5c..7cad180d6deb 100644
--- a/fs/ceph/mds_client.c
+++ b/fs/ceph/mds_client.c
@@ -11,6 +11,7 @@
 #include <linux/ratelimit.h>
 #include <linux/bits.h>
 #include <linux/ktime.h>
+#include <linux/bitmap.h>
 
 #include "super.h"
 #include "mds_client.h"
@@ -652,14 +653,9 @@ const char *ceph_session_state_name(int s)
 
 struct ceph_mds_session *ceph_get_mds_session(struct ceph_mds_session *s)
 {
-	if (refcount_inc_not_zero(&s->s_ref)) {
-		dout("mdsc get_session %p %d -> %d\n", s,
-		     refcount_read(&s->s_ref)-1, refcount_read(&s->s_ref));
+	if (refcount_inc_not_zero(&s->s_ref))
 		return s;
-	} else {
-		dout("mdsc get_session %p 0 -- FAIL\n", s);
-		return NULL;
-	}
+	return NULL;
 }
 
 void ceph_put_mds_session(struct ceph_mds_session *s)
@@ -667,8 +663,6 @@ void ceph_put_mds_session(struct ceph_mds_session *s)
 	if (IS_ERR_OR_NULL(s))
 		return;
 
-	dout("mdsc put_session %p %d -> %d\n", s,
-	     refcount_read(&s->s_ref), refcount_read(&s->s_ref)-1);
 	if (refcount_dec_and_test(&s->s_ref)) {
 		if (s->s_auth.authorizer)
 			ceph_auth_destroy_authorizer(s->s_auth.authorizer);
@@ -743,8 +737,6 @@ static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
 	s->s_mdsc = mdsc;
 	s->s_mds = mds;
 	s->s_state = CEPH_MDS_SESSION_NEW;
-	s->s_ttl = 0;
-	s->s_seq = 0;
 	mutex_init(&s->s_mutex);
 
 	ceph_con_init(&s->s_con, s, &mds_con_ops, &mdsc->fsc->client->msgr);
@@ -753,17 +745,11 @@ static struct ceph_mds_session *register_session(struct ceph_mds_client *mdsc,
 	s->s_cap_ttl = jiffies - 1;
 
 	spin_lock_init(&s->s_cap_lock);
-	s->s_renew_requested = 0;
-	s->s_renew_seq = 0;
 	INIT_LIST_HEAD(&s->s_caps);
-	s->s_nr_caps = 0;
 	refcount_set(&s->s_ref, 1);
 	INIT_LIST_HEAD(&s->s_waiting);
 	INIT_LIST_HEAD(&s->s_unsafe);
 	xa_init(&s->s_delegated_inos);
-	s->s_num_cap_releases = 0;
-	s->s_cap_reconnect = 0;
-	s->s_cap_iterator = NULL;
 	INIT_LIST_HEAD(&s->s_cap_releases);
 	INIT_WORK(&s->s_cap_release_work, ceph_cap_release_work);
 
@@ -811,6 +797,33 @@ static void put_request_session(struct ceph_mds_request *req)
 	}
 }
 
+void ceph_mdsc_iterate_sessions(struct ceph_mds_client *mdsc,
+				void (*cb)(struct ceph_mds_session *),
+				bool check_state)
+{
+	int mds;
+
+	mutex_lock(&mdsc->mutex);
+	for (mds = 0; mds < mdsc->max_sessions; ++mds) {
+		struct ceph_mds_session *s;
+
+		s = __ceph_lookup_mds_session(mdsc, mds);
+		if (!s)
+			continue;
+
+		if (check_state && !check_session_state(s)) {
+			ceph_put_mds_session(s);
+			continue;
+		}
+
+		mutex_unlock(&mdsc->mutex);
+		cb(s);
+		ceph_put_mds_session(s);
+		mutex_lock(&mdsc->mutex);
+	}
+	mutex_unlock(&mdsc->mutex);
+}
+
 void ceph_mdsc_release_request(struct kref *kref)
 {
 	struct ceph_mds_request *req = container_of(kref,
@@ -1155,7 +1168,7 @@ random:
 /*
  * session messages
  */
-static struct ceph_msg *create_session_msg(u32 op, u64 seq)
+struct ceph_msg *ceph_create_session_msg(u32 op, u64 seq)
 {
 	struct ceph_msg *msg;
 	struct ceph_mds_session_head *h;
@@ -1163,7 +1176,8 @@ static struct ceph_msg *create_session_msg(u32 op, u64 seq)
 	msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h), GFP_NOFS,
 			   false);
 	if (!msg) {
-		pr_err("create_session_msg ENOMEM creating msg\n");
+		pr_err("ENOMEM creating session %s msg\n",
+		       ceph_session_op_name(op));
 		return NULL;
 	}
 	h = msg->front.iov_base;
@@ -1294,7 +1308,7 @@ static struct ceph_msg *create_session_open_msg(struct ceph_mds_client *mdsc, u6
 	msg = ceph_msg_new(CEPH_MSG_CLIENT_SESSION, sizeof(*h) + extra_bytes,
 			   GFP_NOFS, false);
 	if (!msg) {
-		pr_err("create_session_msg ENOMEM creating msg\n");
+		pr_err("ENOMEM creating session open msg\n");
 		return ERR_PTR(-ENOMEM);
 	}
 	p = msg->front.iov_base;
@@ -1583,14 +1597,39 @@ out:
 	return ret;
 }
 
+static int remove_capsnaps(struct ceph_mds_client *mdsc, struct inode *inode)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_cap_snap *capsnap;
+	int capsnap_release = 0;
+
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	dout("removing capsnaps, ci is %p, inode is %p\n", ci, inode);
+
+	while (!list_empty(&ci->i_cap_snaps)) {
+		capsnap = list_first_entry(&ci->i_cap_snaps,
+					   struct ceph_cap_snap, ci_item);
+		__ceph_remove_capsnap(inode, capsnap, NULL, NULL);
+		ceph_put_snap_context(capsnap->context);
+		ceph_put_cap_snap(capsnap);
+		capsnap_release++;
+	}
+	wake_up_all(&ci->i_cap_wq);
+	wake_up_all(&mdsc->cap_flushing_wq);
+	return capsnap_release;
+}
+
 static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
 				  void *arg)
 {
 	struct ceph_fs_client *fsc = (struct ceph_fs_client *)arg;
+	struct ceph_mds_client *mdsc = fsc->mdsc;
 	struct ceph_inode_info *ci = ceph_inode(inode);
 	LIST_HEAD(to_remove);
 	bool dirty_dropped = false;
 	bool invalidate = false;
+	int capsnap_release = 0;
 
 	dout("removing cap %p, ci is %p, inode is %p\n",
 	     cap, ci, &ci->vfs_inode);
@@ -1598,7 +1637,6 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
 	__ceph_remove_cap(cap, false);
 	if (!ci->i_auth_cap) {
 		struct ceph_cap_flush *cf;
-		struct ceph_mds_client *mdsc = fsc->mdsc;
 
 		if (READ_ONCE(fsc->mount_state) >= CEPH_MOUNT_SHUTDOWN) {
 			if (inode->i_data.nrpages > 0)
@@ -1662,6 +1700,9 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
 			list_add(&ci->i_prealloc_cap_flush->i_list, &to_remove);
 			ci->i_prealloc_cap_flush = NULL;
 		}
+
+		if (!list_empty(&ci->i_cap_snaps))
+			capsnap_release = remove_capsnaps(mdsc, inode);
 	}
 	spin_unlock(&ci->i_ceph_lock);
 	while (!list_empty(&to_remove)) {
@@ -1678,6 +1719,8 @@ static int remove_session_caps_cb(struct inode *inode, struct ceph_cap *cap,
 		ceph_queue_invalidate(inode);
 	if (dirty_dropped)
 		iput(inode);
+	while (capsnap_release--)
+		iput(inode);
 	return 0;
 }
 
@@ -1803,8 +1846,8 @@ static int send_renew_caps(struct ceph_mds_client *mdsc,
 
 	dout("send_renew_caps to mds%d (%s)\n", session->s_mds,
 		ceph_mds_state_name(state));
-	msg = create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
-				 ++session->s_renew_seq);
+	msg = ceph_create_session_msg(CEPH_SESSION_REQUEST_RENEWCAPS,
+				      ++session->s_renew_seq);
 	if (!msg)
 		return -ENOMEM;
 	ceph_con_send(&session->s_con, msg);
@@ -1818,7 +1861,7 @@ static int send_flushmsg_ack(struct ceph_mds_client *mdsc,
 
 	dout("send_flushmsg_ack to mds%d (%s)s seq %lld\n",
 	     session->s_mds, ceph_session_state_name(session->s_state), seq);
-	msg = create_session_msg(CEPH_SESSION_FLUSHMSG_ACK, seq);
+	msg = ceph_create_session_msg(CEPH_SESSION_FLUSHMSG_ACK, seq);
 	if (!msg)
 		return -ENOMEM;
 	ceph_con_send(&session->s_con, msg);
@@ -1870,7 +1913,8 @@ static int request_close_session(struct ceph_mds_session *session)
 	dout("request_close_session mds%d state %s seq %lld\n",
 	     session->s_mds, ceph_session_state_name(session->s_state),
 	     session->s_seq);
-	msg = create_session_msg(CEPH_SESSION_REQUEST_CLOSE, session->s_seq);
+	msg = ceph_create_session_msg(CEPH_SESSION_REQUEST_CLOSE,
+				      session->s_seq);
 	if (!msg)
 		return -ENOMEM;
 	ceph_con_send(&session->s_con, msg);
@@ -1965,7 +2009,7 @@ static int trim_caps_cb(struct inode *inode, struct ceph_cap *cap, void *arg)
 
 	if (oissued) {
 		/* we aren't the only cap.. just remove us */
-		__ceph_remove_cap(cap, true);
+		ceph_remove_cap(cap, true);
 		(*remaining)--;
 	} else {
 		struct dentry *dentry;
@@ -4150,13 +4194,21 @@ static void check_new_map(struct ceph_mds_client *mdsc,
 			  struct ceph_mdsmap *newmap,
 			  struct ceph_mdsmap *oldmap)
 {
-	int i;
+	int i, j, err;
 	int oldstate, newstate;
 	struct ceph_mds_session *s;
+	unsigned long targets[DIV_ROUND_UP(CEPH_MAX_MDS, sizeof(unsigned long))] = {0};
 
 	dout("check_new_map new %u old %u\n",
 	     newmap->m_epoch, oldmap->m_epoch);
 
+	if (newmap->m_info) {
+		for (i = 0; i < newmap->possible_max_rank; i++) {
+			for (j = 0; j < newmap->m_info[i].num_export_targets; j++)
+				set_bit(newmap->m_info[i].export_targets[j], targets);
+		}
+	}
+
 	for (i = 0; i < oldmap->possible_max_rank && i < mdsc->max_sessions; i++) {
 		if (!mdsc->sessions[i])
 			continue;
@@ -4210,6 +4262,7 @@ static void check_new_map(struct ceph_mds_client *mdsc,
 		if (s->s_state == CEPH_MDS_SESSION_RESTARTING &&
 		    newstate >= CEPH_MDS_STATE_RECONNECT) {
 			mutex_unlock(&mdsc->mutex);
+			clear_bit(i, targets);
 			send_mds_reconnect(mdsc, s);
 			mutex_lock(&mdsc->mutex);
 		}
@@ -4232,6 +4285,51 @@ static void check_new_map(struct ceph_mds_client *mdsc,
 		}
 	}
 
+	/*
+	 * Only open and reconnect sessions that don't exist yet.
+	 */
+	for (i = 0; i < newmap->possible_max_rank; i++) {
+		/*
+		 * In case the import MDS is crashed just after
+		 * the EImportStart journal is flushed, so when
+		 * a standby MDS takes over it and is replaying
+		 * the EImportStart journal the new MDS daemon
+		 * will wait the client to reconnect it, but the
+		 * client may never register/open the session yet.
+		 *
+		 * Will try to reconnect that MDS daemon if the
+		 * rank number is in the export targets array and
+		 * is the up:reconnect state.
+		 */
+		newstate = ceph_mdsmap_get_state(newmap, i);
+		if (!test_bit(i, targets) || newstate != CEPH_MDS_STATE_RECONNECT)
+			continue;
+
+		/*
+		 * The session maybe registered and opened by some
+		 * requests which were choosing random MDSes during
+		 * the mdsc->mutex's unlock/lock gap below in rare
+		 * case. But the related MDS daemon will just queue
+		 * that requests and be still waiting for the client's
+		 * reconnection request in up:reconnect state.
+		 */
+		s = __ceph_lookup_mds_session(mdsc, i);
+		if (likely(!s)) {
+			s = __open_export_target_session(mdsc, i);
+			if (IS_ERR(s)) {
+				err = PTR_ERR(s);
+				pr_err("failed to open export target session, err %d\n",
+				       err);
+				continue;
+			}
+		}
+		dout("send reconnect to export target mds.%d\n", i);
+		mutex_unlock(&mdsc->mutex);
+		send_mds_reconnect(mdsc, s);
+		ceph_put_mds_session(s);
+		mutex_lock(&mdsc->mutex);
+	}
+
 	for (i = 0; i < newmap->possible_max_rank && i < mdsc->max_sessions; i++) {
 		s = mdsc->sessions[i];
 		if (!s)
@@ -4409,24 +4507,12 @@ void ceph_mdsc_lease_send_msg(struct ceph_mds_session *session,
 }
 
 /*
- * lock unlock sessions, to wait ongoing session activities
+ * lock unlock the session, to wait ongoing session activities
  */
-static void lock_unlock_sessions(struct ceph_mds_client *mdsc)
+static void lock_unlock_session(struct ceph_mds_session *s)
 {
-	int i;
-
-	mutex_lock(&mdsc->mutex);
-	for (i = 0; i < mdsc->max_sessions; i++) {
-		struct ceph_mds_session *s = __ceph_lookup_mds_session(mdsc, i);
-		if (!s)
-			continue;
-		mutex_unlock(&mdsc->mutex);
-		mutex_lock(&s->s_mutex);
-		mutex_unlock(&s->s_mutex);
-		ceph_put_mds_session(s);
-		mutex_lock(&mdsc->mutex);
-	}
-	mutex_unlock(&mdsc->mutex);
+	mutex_lock(&s->s_mutex);
+	mutex_unlock(&s->s_mutex);
 }
 
 static void maybe_recover_session(struct ceph_mds_client *mdsc)
@@ -4448,6 +4534,8 @@ static void maybe_recover_session(struct ceph_mds_client *mdsc)
 
 bool check_session_state(struct ceph_mds_session *s)
 {
+	struct ceph_fs_client *fsc = s->s_mdsc->fsc;
+
 	switch (s->s_state) {
 	case CEPH_MDS_SESSION_OPEN:
 		if (s->s_ttl && time_after(jiffies, s->s_ttl)) {
@@ -4456,8 +4544,9 @@ bool check_session_state(struct ceph_mds_session *s)
 		}
 		break;
 	case CEPH_MDS_SESSION_CLOSING:
-		/* Should never reach this when we're unmounting */
-		WARN_ON_ONCE(s->s_ttl);
+		/* Should never reach this when not force unmounting */
+		WARN_ON_ONCE(s->s_ttl &&
+			     READ_ONCE(fsc->mount_state) != CEPH_MOUNT_SHUTDOWN);
 		fallthrough;
 	case CEPH_MDS_SESSION_NEW:
 	case CEPH_MDS_SESSION_RESTARTING:
@@ -4584,21 +4673,12 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 	init_completion(&mdsc->safe_umount_waiters);
 	init_waitqueue_head(&mdsc->session_close_wq);
 	INIT_LIST_HEAD(&mdsc->waiting_for_map);
-	mdsc->sessions = NULL;
-	atomic_set(&mdsc->num_sessions, 0);
-	mdsc->max_sessions = 0;
-	mdsc->stopping = 0;
-	atomic64_set(&mdsc->quotarealms_count, 0);
 	mdsc->quotarealms_inodes = RB_ROOT;
 	mutex_init(&mdsc->quotarealms_inodes_mutex);
-	mdsc->last_snap_seq = 0;
 	init_rwsem(&mdsc->snap_rwsem);
 	mdsc->snap_realms = RB_ROOT;
 	INIT_LIST_HEAD(&mdsc->snap_empty);
-	mdsc->num_snap_realms = 0;
 	spin_lock_init(&mdsc->snap_empty_lock);
-	mdsc->last_tid = 0;
-	mdsc->oldest_tid = 0;
 	mdsc->request_tree = RB_ROOT;
 	INIT_DELAYED_WORK(&mdsc->delayed_work, delayed_work);
 	mdsc->last_renew_caps = jiffies;
@@ -4610,11 +4690,9 @@ int ceph_mdsc_init(struct ceph_fs_client *fsc)
 	mdsc->last_cap_flush_tid = 1;
 	INIT_LIST_HEAD(&mdsc->cap_flush_list);
 	INIT_LIST_HEAD(&mdsc->cap_dirty_migrating);
-	mdsc->num_cap_flushing = 0;
 	spin_lock_init(&mdsc->cap_dirty_lock);
 	init_waitqueue_head(&mdsc->cap_flushing_wq);
 	INIT_WORK(&mdsc->cap_reclaim_work, ceph_cap_reclaim_work);
-	atomic_set(&mdsc->cap_reclaim_pending, 0);
 	err = ceph_metric_init(&mdsc->metric);
 	if (err)
 		goto err_mdsmap;
@@ -4676,6 +4754,30 @@ static void wait_requests(struct ceph_mds_client *mdsc)
 	dout("wait_requests done\n");
 }
 
+void send_flush_mdlog(struct ceph_mds_session *s)
+{
+	struct ceph_msg *msg;
+
+	/*
+	 * Pre-luminous MDS crashes when it sees an unknown session request
+	 */
+	if (!CEPH_HAVE_FEATURE(s->s_con.peer_features, SERVER_LUMINOUS))
+		return;
+
+	mutex_lock(&s->s_mutex);
+	dout("request mdlog flush to mds%d (%s)s seq %lld\n", s->s_mds,
+	     ceph_session_state_name(s->s_state), s->s_seq);
+	msg = ceph_create_session_msg(CEPH_SESSION_REQUEST_FLUSH_MDLOG,
+				      s->s_seq);
+	if (!msg) {
+		pr_err("failed to request mdlog flush to mds%d (%s) seq %lld\n",
+		       s->s_mds, ceph_session_state_name(s->s_state), s->s_seq);
+	} else {
+		ceph_con_send(&s->s_con, msg);
+	}
+	mutex_unlock(&s->s_mutex);
+}
+
 /*
  * called before mount is ro, and before dentries are torn down.
  * (hmm, does this still race with new lookups?)
@@ -4685,7 +4787,8 @@ void ceph_mdsc_pre_umount(struct ceph_mds_client *mdsc)
 	dout("pre_umount\n");
 	mdsc->stopping = 1;
 
-	lock_unlock_sessions(mdsc);
+	ceph_mdsc_iterate_sessions(mdsc, send_flush_mdlog, true);
+	ceph_mdsc_iterate_sessions(mdsc, lock_unlock_session, false);
 	ceph_flush_dirty_caps(mdsc);
 	wait_requests(mdsc);
 
@@ -4912,7 +5015,6 @@ void ceph_mdsc_destroy(struct ceph_fs_client *fsc)
 
 	ceph_metric_destroy(&mdsc->metric);
 
-	flush_delayed_work(&mdsc->metric.delayed_work);
 	fsc->mdsc = NULL;
 	kfree(mdsc);
 	dout("mdsc_destroy %p done\n", mdsc);
diff --git a/fs/ceph/mds_client.h b/fs/ceph/mds_client.h
index 20e42d8b66c6..97c7f7bfa55f 100644
--- a/fs/ceph/mds_client.h
+++ b/fs/ceph/mds_client.h
@@ -522,6 +522,11 @@ static inline void ceph_mdsc_put_request(struct ceph_mds_request *req)
 	kref_put(&req->r_kref, ceph_mdsc_release_request);
 }
 
+extern void send_flush_mdlog(struct ceph_mds_session *s);
+extern void ceph_mdsc_iterate_sessions(struct ceph_mds_client *mdsc,
+				       void (*cb)(struct ceph_mds_session *),
+				       bool check_state);
+extern struct ceph_msg *ceph_create_session_msg(u32 op, u64 seq);
 extern void __ceph_queue_cap_release(struct ceph_mds_session *session,
 				    struct ceph_cap *cap);
 extern void ceph_flush_cap_releases(struct ceph_mds_client *mdsc,
diff --git a/fs/ceph/mdsmap.c b/fs/ceph/mdsmap.c
index 3c444b9cb17b..61d67cbcb367 100644
--- a/fs/ceph/mdsmap.c
+++ b/fs/ceph/mdsmap.c
@@ -122,6 +122,7 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
 	int err;
 	u8 mdsmap_v;
 	u16 mdsmap_ev;
+	u32 target;
 
 	m = kzalloc(sizeof(*m), GFP_NOFS);
 	if (!m)
@@ -260,9 +261,14 @@ struct ceph_mdsmap *ceph_mdsmap_decode(void **p, void *end, bool msgr2)
 						       sizeof(u32), GFP_NOFS);
 			if (!info->export_targets)
 				goto nomem;
-			for (j = 0; j < num_export_targets; j++)
-				info->export_targets[j] =
-				       ceph_decode_32(&pexport_targets);
+			for (j = 0; j < num_export_targets; j++) {
+				target = ceph_decode_32(&pexport_targets);
+				if (target >= m->possible_max_rank) {
+					err = -EIO;
+					goto corrupt;
+				}
+				info->export_targets[j] = target;
+			}
 		} else {
 			info->export_targets = NULL;
 		}
diff --git a/fs/ceph/metric.c b/fs/ceph/metric.c
index 5ac151eb0d49..04d5df29bbbf 100644
--- a/fs/ceph/metric.c
+++ b/fs/ceph/metric.c
@@ -302,6 +302,8 @@ void ceph_metric_destroy(struct ceph_client_metric *m)
 	if (!m)
 		return;
 
+	cancel_delayed_work_sync(&m->delayed_work);
+
 	percpu_counter_destroy(&m->total_inodes);
 	percpu_counter_destroy(&m->opened_inodes);
 	percpu_counter_destroy(&m->i_caps_mis);
@@ -309,8 +311,6 @@ void ceph_metric_destroy(struct ceph_client_metric *m)
 	percpu_counter_destroy(&m->d_lease_mis);
 	percpu_counter_destroy(&m->d_lease_hit);
 
-	cancel_delayed_work_sync(&m->delayed_work);
-
 	ceph_put_mds_session(m->session);
 }
 
diff --git a/fs/ceph/snap.c b/fs/ceph/snap.c
index 15105f9da3fd..b41e6724c591 100644
--- a/fs/ceph/snap.c
+++ b/fs/ceph/snap.c
@@ -849,6 +849,43 @@ static void flush_snaps(struct ceph_mds_client *mdsc)
 	dout("flush_snaps done\n");
 }
 
+/**
+ * ceph_change_snap_realm - change the snap_realm for an inode
+ * @inode: inode to move to new snap realm
+ * @realm: new realm to move inode into (may be NULL)
+ *
+ * Detach an inode from its old snaprealm (if any) and attach it to
+ * the new snaprealm (if any). The old snap realm reference held by
+ * the inode is put. If realm is non-NULL, then the caller's reference
+ * to it is taken over by the inode.
+ */
+void ceph_change_snap_realm(struct inode *inode, struct ceph_snap_realm *realm)
+{
+	struct ceph_inode_info *ci = ceph_inode(inode);
+	struct ceph_mds_client *mdsc = ceph_inode_to_client(inode)->mdsc;
+	struct ceph_snap_realm *oldrealm = ci->i_snap_realm;
+
+	lockdep_assert_held(&ci->i_ceph_lock);
+
+	if (oldrealm) {
+		spin_lock(&oldrealm->inodes_with_caps_lock);
+		list_del_init(&ci->i_snap_realm_item);
+		if (oldrealm->ino == ci->i_vino.ino)
+			oldrealm->inode = NULL;
+		spin_unlock(&oldrealm->inodes_with_caps_lock);
+		ceph_put_snap_realm(mdsc, oldrealm);
+	}
+
+	ci->i_snap_realm = realm;
+
+	if (realm) {
+		spin_lock(&realm->inodes_with_caps_lock);
+		list_add(&ci->i_snap_realm_item, &realm->inodes_with_caps);
+		if (realm->ino == ci->i_vino.ino)
+			realm->inode = inode;
+		spin_unlock(&realm->inodes_with_caps_lock);
+	}
+}
 
 /*
  * Handle a snap notification from the MDS.
@@ -935,7 +972,6 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc,
 			};
 			struct inode *inode = ceph_find_inode(sb, vino);
 			struct ceph_inode_info *ci;
-			struct ceph_snap_realm *oldrealm;
 
 			if (!inode)
 				continue;
@@ -960,27 +996,10 @@ void ceph_handle_snap(struct ceph_mds_client *mdsc,
 			}
 			dout(" will move %p to split realm %llx %p\n",
 			     inode, realm->ino, realm);
-			/*
-			 * Move the inode to the new realm
-			 */
-			oldrealm = ci->i_snap_realm;
-			spin_lock(&oldrealm->inodes_with_caps_lock);
-			list_del_init(&ci->i_snap_realm_item);
-			spin_unlock(&oldrealm->inodes_with_caps_lock);
-
-			spin_lock(&realm->inodes_with_caps_lock);
-			list_add(&ci->i_snap_realm_item,
-				 &realm->inodes_with_caps);
-			ci->i_snap_realm = realm;
-			if (realm->ino == ci->i_vino.ino)
-                                realm->inode = inode;
-			spin_unlock(&realm->inodes_with_caps_lock);
-
-			spin_unlock(&ci->i_ceph_lock);
 
 			ceph_get_snap_realm(mdsc, realm);
-			ceph_put_snap_realm(mdsc, oldrealm);
-
+			ceph_change_snap_realm(inode, realm);
+			spin_unlock(&ci->i_ceph_lock);
 			iput(inode);
 			continue;
 
diff --git a/fs/ceph/strings.c b/fs/ceph/strings.c
index 4a79f3632260..573bb9556fb5 100644
--- a/fs/ceph/strings.c
+++ b/fs/ceph/strings.c
@@ -46,6 +46,7 @@ const char *ceph_session_op_name(int op)
 	case CEPH_SESSION_FLUSHMSG_ACK: return "flushmsg_ack";
 	case CEPH_SESSION_FORCE_RO: return "force_ro";
 	case CEPH_SESSION_REJECT: return "reject";
+	case CEPH_SESSION_REQUEST_FLUSH_MDLOG: return "flush_mdlog";
 	}
 	return "???";
 }
diff --git a/fs/ceph/super.h b/fs/ceph/super.h
index c30258f95e37..a40eb14c282a 100644
--- a/fs/ceph/super.h
+++ b/fs/ceph/super.h
@@ -418,7 +418,6 @@ struct ceph_inode_info {
 		struct ceph_snap_realm *i_snap_realm; /* snap realm (if caps) */
 		struct ceph_snapid_map *i_snapid_map; /* snapid -> dev_t */
 	};
-	int i_snap_realm_counter; /* snap realm (if caps) */
 	struct list_head i_snap_realm_item;
 	struct list_head i_snap_flush_item;
 	struct timespec64 i_btime;
@@ -929,6 +928,7 @@ extern void ceph_put_snap_realm(struct ceph_mds_client *mdsc,
 extern int ceph_update_snap_trace(struct ceph_mds_client *m,
 				  void *p, void *e, bool deletion,
 				  struct ceph_snap_realm **realm_ret);
+void ceph_change_snap_realm(struct inode *inode, struct ceph_snap_realm *realm);
 extern void ceph_handle_snap(struct ceph_mds_client *mdsc,
 			     struct ceph_mds_session *session,
 			     struct ceph_msg *msg);
@@ -1138,6 +1138,7 @@ extern void ceph_add_cap(struct inode *inode,
 			 unsigned cap, unsigned seq, u64 realmino, int flags,
 			 struct ceph_cap **new_cap);
 extern void __ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
+extern void ceph_remove_cap(struct ceph_cap *cap, bool queue_release);
 extern void __ceph_remove_caps(struct ceph_inode_info *ci);
 extern void ceph_put_cap(struct ceph_mds_client *mdsc,
 			 struct ceph_cap *cap);
@@ -1163,6 +1164,12 @@ extern void ceph_put_cap_refs_no_check_caps(struct ceph_inode_info *ci,
 					    int had);
 extern void ceph_put_wrbuffer_cap_refs(struct ceph_inode_info *ci, int nr,
 				       struct ceph_snap_context *snapc);
+extern void __ceph_remove_capsnap(struct inode *inode,
+				  struct ceph_cap_snap *capsnap,
+				  bool *wake_ci, bool *wake_mdsc);
+extern void ceph_remove_capsnap(struct inode *inode,
+				struct ceph_cap_snap *capsnap,
+				bool *wake_ci, bool *wake_mdsc);
 extern void ceph_flush_snaps(struct ceph_inode_info *ci,
 			     struct ceph_mds_session **psession);
 extern bool __ceph_should_report_size(struct ceph_inode_info *ci);
diff --git a/fs/ceph/xattr.c b/fs/ceph/xattr.c
index 1242db8d3444..159a1ffa4f4b 100644
--- a/fs/ceph/xattr.c
+++ b/fs/ceph/xattr.c
@@ -340,6 +340,18 @@ static ssize_t ceph_vxattrcb_caps(struct ceph_inode_info *ci, char *val,
 			      ceph_cap_string(issued), issued);
 }
 
+static ssize_t ceph_vxattrcb_auth_mds(struct ceph_inode_info *ci,
+				       char *val, size_t size)
+{
+	int ret;
+
+	spin_lock(&ci->i_ceph_lock);
+	ret = ceph_fmt_xattr(val, size, "%d",
+			     ci->i_auth_cap ? ci->i_auth_cap->session->s_mds : -1);
+	spin_unlock(&ci->i_ceph_lock);
+	return ret;
+}
+
 #define CEPH_XATTR_NAME(_type, _name)	XATTR_CEPH_PREFIX #_type "." #_name
 #define CEPH_XATTR_NAME2(_type, _name, _name2)	\
 	XATTR_CEPH_PREFIX #_type "." #_name "." #_name2
@@ -473,6 +485,13 @@ static struct ceph_vxattr ceph_common_vxattrs[] = {
 		.exists_cb = NULL,
 		.flags = VXATTR_FLAG_READONLY,
 	},
+	{
+		.name = "ceph.auth_mds",
+		.name_size = sizeof("ceph.auth_mds"),
+		.getxattr_cb = ceph_vxattrcb_auth_mds,
+		.exists_cb = NULL,
+		.flags = VXATTR_FLAG_READONLY,
+	},
 	{ .name = NULL, 0 }	/* Required table terminator */
 };
 
diff --git a/fs/coredump.c b/fs/coredump.c
index 07afb5ddb1c4..3224dee44d30 100644
--- a/fs/coredump.c
+++ b/fs/coredump.c
@@ -782,10 +782,17 @@ void do_coredump(const kernel_siginfo_t *siginfo)
 		 * filesystem.
 		 */
 		mnt_userns = file_mnt_user_ns(cprm.file);
-		if (!uid_eq(i_uid_into_mnt(mnt_userns, inode), current_fsuid()))
+		if (!uid_eq(i_uid_into_mnt(mnt_userns, inode),
+			    current_fsuid())) {
+			pr_info_ratelimited("Core dump to %s aborted: cannot preserve file owner\n",
+					    cn.corename);
 			goto close_fail;
-		if ((inode->i_mode & 0677) != 0600)
+		}
+		if ((inode->i_mode & 0677) != 0600) {
+			pr_info_ratelimited("Core dump to %s aborted: cannot preserve file permissions\n",
+					    cn.corename);
 			goto close_fail;
+		}
 		if (!(cprm.file->f_mode & FMODE_CAN_WRITE))
 			goto close_fail;
 		if (do_truncate(mnt_userns, cprm.file->f_path.dentry,
@@ -1127,8 +1134,10 @@ int dump_vma_snapshot(struct coredump_params *cprm, int *vma_count,
 
 	mmap_write_unlock(mm);
 
-	if (WARN_ON(i != *vma_count))
+	if (WARN_ON(i != *vma_count)) {
+		kvfree(*vma_meta);
 		return -EFAULT;
+	}
 
 	*vma_data_size_ptr = vma_data_size;
 	return 0;
diff --git a/fs/erofs/super.c b/fs/erofs/super.c
index a8d49e8fc83a..11b88559f8bf 100644
--- a/fs/erofs/super.c
+++ b/fs/erofs/super.c
@@ -546,7 +546,7 @@ static int erofs_fc_fill_super(struct super_block *sb, struct fs_context *fc)
 		return err;
 
 	if (test_opt(ctx, DAX_ALWAYS) &&
-	    !bdev_dax_supported(sb->s_bdev, EROFS_BLKSIZ)) {
+	    !dax_supported(sbi->dax_dev, sb->s_bdev, EROFS_BLKSIZ, 0, bdev_nr_sectors(sb->s_bdev))) {
 		errorfc(fc, "DAX unsupported by block device. Turning off DAX.");
 		clear_opt(ctx, DAX_ALWAYS);
 	}
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index 1e596e1d0bba..06f4c5ae1451 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -723,7 +723,7 @@ static int ep_remove(struct eventpoll *ep, struct epitem *epi)
 	 */
 	call_rcu(&epi->rcu, epi_rcu_free);
 
-	atomic_long_dec(&ep->user->epoll_watches);
+	percpu_counter_dec(&ep->user->epoll_watches);
 
 	return 0;
 }
@@ -1439,7 +1439,6 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
 {
 	int error, pwake = 0;
 	__poll_t revents;
-	long user_watches;
 	struct epitem *epi;
 	struct ep_pqueue epq;
 	struct eventpoll *tep = NULL;
@@ -1449,11 +1448,15 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
 
 	lockdep_assert_irqs_enabled();
 
-	user_watches = atomic_long_read(&ep->user->epoll_watches);
-	if (unlikely(user_watches >= max_user_watches))
+	if (unlikely(percpu_counter_compare(&ep->user->epoll_watches,
+					    max_user_watches) >= 0))
 		return -ENOSPC;
-	if (!(epi = kmem_cache_zalloc(epi_cache, GFP_KERNEL)))
+	percpu_counter_inc(&ep->user->epoll_watches);
+
+	if (!(epi = kmem_cache_zalloc(epi_cache, GFP_KERNEL))) {
+		percpu_counter_dec(&ep->user->epoll_watches);
 		return -ENOMEM;
+	}
 
 	/* Item initialization follow here ... */
 	INIT_LIST_HEAD(&epi->rdllink);
@@ -1466,17 +1469,16 @@ static int ep_insert(struct eventpoll *ep, const struct epoll_event *event,
 		mutex_lock_nested(&tep->mtx, 1);
 	/* Add the current item to the list of active epoll hook for this file */
 	if (unlikely(attach_epitem(tfile, epi) < 0)) {
-		kmem_cache_free(epi_cache, epi);
 		if (tep)
 			mutex_unlock(&tep->mtx);
+		kmem_cache_free(epi_cache, epi);
+		percpu_counter_dec(&ep->user->epoll_watches);
 		return -ENOMEM;
 	}
 
 	if (full_check && !tep)
 		list_file(tfile);
 
-	atomic_long_inc(&ep->user->epoll_watches);
-
 	/*
 	 * Add the current item to the RB tree. All RB tree operations are
 	 * protected by "mtx", and ep_insert() is called with "mtx" held.
@@ -1684,8 +1686,8 @@ static int ep_send_events(struct eventpoll *ep,
 		if (!revents)
 			continue;
 
-		if (__put_user(revents, &events->events) ||
-		    __put_user(epi->event.data, &events->data)) {
+		events = epoll_put_uevent(revents, epi->event.data, events);
+		if (!events) {
 			list_add(&epi->rdllink, &txlist);
 			ep_pm_stay_awake(epi);
 			if (!res)
@@ -1693,7 +1695,6 @@ static int ep_send_events(struct eventpoll *ep,
 			break;
 		}
 		res++;
-		events++;
 		if (epi->event.events & EPOLLONESHOT)
 			epi->event.events &= EP_PRIVATE_BITS;
 		else if (!(epi->event.events & EPOLLET)) {
diff --git a/fs/ext2/super.c b/fs/ext2/super.c
index 987bcf32ed46..d8d580b609ba 100644
--- a/fs/ext2/super.c
+++ b/fs/ext2/super.c
@@ -946,7 +946,8 @@ static int ext2_fill_super(struct super_block *sb, void *data, int silent)
 	blocksize = BLOCK_SIZE << le32_to_cpu(sbi->s_es->s_log_block_size);
 
 	if (test_opt(sb, DAX)) {
-		if (!bdev_dax_supported(sb->s_bdev, blocksize)) {
+		if (!dax_supported(dax_dev, sb->s_bdev, blocksize, 0,
+				bdev_nr_sectors(sb->s_bdev))) {
 			ext2_msg(sb, KERN_ERR,
 				"DAX unsupported by block device. Turning off DAX.");
 			clear_opt(sbi->s_mount_opt, DAX);
diff --git a/fs/ext4/super.c b/fs/ext4/super.c
index 136940af00b8..0775950ee84e 100644
--- a/fs/ext4/super.c
+++ b/fs/ext4/super.c
@@ -4287,7 +4287,8 @@ static int ext4_fill_super(struct super_block *sb, void *data, int silent)
 		goto failed_mount;
 	}
 
-	if (bdev_dax_supported(sb->s_bdev, blocksize))
+	if (dax_supported(dax_dev, sb->s_bdev, blocksize, 0,
+			bdev_nr_sectors(sb->s_bdev)))
 		set_bit(EXT4_FLAGS_BDEV_IS_DAX, &sbi->s_ext4_flags);
 
 	if (sbi->s_mount_opt & EXT4_MOUNT_DAX_ALWAYS) {
diff --git a/fs/filesystems.c b/fs/filesystems.c
index 90b8d879fbaf..58b9067b2391 100644
--- a/fs/filesystems.c
+++ b/fs/filesystems.c
@@ -209,21 +209,28 @@ SYSCALL_DEFINE3(sysfs, int, option, unsigned long, arg1, unsigned long, arg2)
 }
 #endif
 
-int __init get_filesystem_list(char *buf)
+int __init list_bdev_fs_names(char *buf, size_t size)
 {
-	int len = 0;
-	struct file_system_type * tmp;
+	struct file_system_type *p;
+	size_t len;
+	int count = 0;
 
 	read_lock(&file_systems_lock);
-	tmp = file_systems;
-	while (tmp && len < PAGE_SIZE - 80) {
-		len += sprintf(buf+len, "%s\t%s\n",
-			(tmp->fs_flags & FS_REQUIRES_DEV) ? "" : "nodev",
-			tmp->name);
-		tmp = tmp->next;
+	for (p = file_systems; p; p = p->next) {
+		if (!(p->fs_flags & FS_REQUIRES_DEV))
+			continue;
+		len = strlen(p->name) + 1;
+		if (len > size) {
+			pr_warn("%s: truncating file system list\n", __func__);
+			break;
+		}
+		memcpy(buf, p->name, len);
+		buf += len;
+		size -= len;
+		count++;
 	}
 	read_unlock(&file_systems_lock);
-	return len;
+	return count;
 }
 
 #ifdef CONFIG_PROC_FS
diff --git a/fs/fuse/control.c b/fs/fuse/control.c
index cc7e94d73c6c..000d2e5627e9 100644
--- a/fs/fuse/control.c
+++ b/fs/fuse/control.c
@@ -328,7 +328,7 @@ void fuse_ctl_remove_conn(struct fuse_conn *fc)
 	drop_nlink(d_inode(fuse_control_sb->s_root));
 }
 
-static int fuse_ctl_fill_super(struct super_block *sb, struct fs_context *fctx)
+static int fuse_ctl_fill_super(struct super_block *sb, struct fs_context *fsc)
 {
 	static const struct tree_descr empty_descr = {""};
 	struct fuse_conn *fc;
@@ -354,18 +354,18 @@ static int fuse_ctl_fill_super(struct super_block *sb, struct fs_context *fctx)
 	return 0;
 }
 
-static int fuse_ctl_get_tree(struct fs_context *fc)
+static int fuse_ctl_get_tree(struct fs_context *fsc)
 {
-	return get_tree_single(fc, fuse_ctl_fill_super);
+	return get_tree_single(fsc, fuse_ctl_fill_super);
 }
 
 static const struct fs_context_operations fuse_ctl_context_ops = {
 	.get_tree	= fuse_ctl_get_tree,
 };
 
-static int fuse_ctl_init_fs_context(struct fs_context *fc)
+static int fuse_ctl_init_fs_context(struct fs_context *fsc)
 {
-	fc->ops = &fuse_ctl_context_ops;
+	fsc->ops = &fuse_ctl_context_ops;
 	return 0;
 }
 
diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c
index 1c8f79b3dd06..dde341a6388a 100644
--- a/fs/fuse/dev.c
+++ b/fs/fuse/dev.c
@@ -288,10 +288,10 @@ void fuse_request_end(struct fuse_req *req)
 
 	/*
 	 * test_and_set_bit() implies smp_mb() between bit
-	 * changing and below intr_entry check. Pairs with
+	 * changing and below FR_INTERRUPTED check. Pairs with
 	 * smp_mb() from queue_interrupt().
 	 */
-	if (!list_empty(&req->intr_entry)) {
+	if (test_bit(FR_INTERRUPTED, &req->flags)) {
 		spin_lock(&fiq->lock);
 		list_del_init(&req->intr_entry);
 		spin_unlock(&fiq->lock);
diff --git a/fs/fuse/file.c b/fs/fuse/file.c
index 621a662c19fb..11404f8c21c7 100644
--- a/fs/fuse/file.c
+++ b/fs/fuse/file.c
@@ -198,12 +198,11 @@ void fuse_finish_open(struct inode *inode, struct file *file)
 	struct fuse_file *ff = file->private_data;
 	struct fuse_conn *fc = get_fuse_conn(inode);
 
-	if (!(ff->open_flags & FOPEN_KEEP_CACHE))
-		invalidate_inode_pages2(inode->i_mapping);
 	if (ff->open_flags & FOPEN_STREAM)
 		stream_open(inode, file);
 	else if (ff->open_flags & FOPEN_NONSEEKABLE)
 		nonseekable_open(inode, file);
+
 	if (fc->atomic_o_trunc && (file->f_flags & O_TRUNC)) {
 		struct fuse_inode *fi = get_fuse_inode(inode);
 
@@ -211,10 +210,14 @@ void fuse_finish_open(struct inode *inode, struct file *file)
 		fi->attr_version = atomic64_inc_return(&fc->attr_version);
 		i_size_write(inode, 0);
 		spin_unlock(&fi->lock);
+		truncate_pagecache(inode, 0);
 		fuse_invalidate_attr(inode);
 		if (fc->writeback_cache)
 			file_update_time(file);
+	} else if (!(ff->open_flags & FOPEN_KEEP_CACHE)) {
+		invalidate_inode_pages2(inode->i_mapping);
 	}
+
 	if ((file->f_mode & FMODE_WRITE) && fc->writeback_cache)
 		fuse_link_write_file(file);
 }
@@ -389,6 +392,7 @@ struct fuse_writepage_args {
 	struct list_head queue_entry;
 	struct fuse_writepage_args *next;
 	struct inode *inode;
+	struct fuse_sync_bucket *bucket;
 };
 
 static struct fuse_writepage_args *fuse_find_writeback(struct fuse_inode *fi,
@@ -1608,6 +1612,9 @@ static void fuse_writepage_free(struct fuse_writepage_args *wpa)
 	struct fuse_args_pages *ap = &wpa->ia.ap;
 	int i;
 
+	if (wpa->bucket)
+		fuse_sync_bucket_dec(wpa->bucket);
+
 	for (i = 0; i < ap->num_pages; i++)
 		__free_page(ap->pages[i]);
 
@@ -1813,8 +1820,7 @@ static void fuse_writepage_end(struct fuse_mount *fm, struct fuse_args *args,
 	fuse_writepage_free(wpa);
 }
 
-static struct fuse_file *__fuse_write_file_get(struct fuse_conn *fc,
-					       struct fuse_inode *fi)
+static struct fuse_file *__fuse_write_file_get(struct fuse_inode *fi)
 {
 	struct fuse_file *ff = NULL;
 
@@ -1829,22 +1835,20 @@ static struct fuse_file *__fuse_write_file_get(struct fuse_conn *fc,
 	return ff;
 }
 
-static struct fuse_file *fuse_write_file_get(struct fuse_conn *fc,
-					     struct fuse_inode *fi)
+static struct fuse_file *fuse_write_file_get(struct fuse_inode *fi)
 {
-	struct fuse_file *ff = __fuse_write_file_get(fc, fi);
+	struct fuse_file *ff = __fuse_write_file_get(fi);
 	WARN_ON(!ff);
 	return ff;
 }
 
 int fuse_write_inode(struct inode *inode, struct writeback_control *wbc)
 {
-	struct fuse_conn *fc = get_fuse_conn(inode);
 	struct fuse_inode *fi = get_fuse_inode(inode);
 	struct fuse_file *ff;
 	int err;
 
-	ff = __fuse_write_file_get(fc, fi);
+	ff = __fuse_write_file_get(fi);
 	err = fuse_flush_times(inode, ff);
 	if (ff)
 		fuse_file_put(ff, false, false);
@@ -1871,6 +1875,20 @@ static struct fuse_writepage_args *fuse_writepage_args_alloc(void)
 
 }
 
+static void fuse_writepage_add_to_bucket(struct fuse_conn *fc,
+					 struct fuse_writepage_args *wpa)
+{
+	if (!fc->sync_fs)
+		return;
+
+	rcu_read_lock();
+	/* Prevent resurrection of dead bucket in unlikely race with syncfs */
+	do {
+		wpa->bucket = rcu_dereference(fc->curr_bucket);
+	} while (unlikely(!atomic_inc_not_zero(&wpa->bucket->count)));
+	rcu_read_unlock();
+}
+
 static int fuse_writepage_locked(struct page *page)
 {
 	struct address_space *mapping = page->mapping;
@@ -1894,10 +1912,11 @@ static int fuse_writepage_locked(struct page *page)
 		goto err_free;
 
 	error = -EIO;
-	wpa->ia.ff = fuse_write_file_get(fc, fi);
+	wpa->ia.ff = fuse_write_file_get(fi);
 	if (!wpa->ia.ff)
 		goto err_nofile;
 
+	fuse_writepage_add_to_bucket(fc, wpa);
 	fuse_write_args_fill(&wpa->ia, wpa->ia.ff, page_offset(page), 0);
 
 	copy_highpage(tmp_page, page);
@@ -2113,7 +2132,7 @@ static int fuse_writepages_fill(struct page *page,
 
 	if (!data->ff) {
 		err = -EIO;
-		data->ff = fuse_write_file_get(fc, fi);
+		data->ff = fuse_write_file_get(fi);
 		if (!data->ff)
 			goto out_unlock;
 	}
@@ -2148,6 +2167,8 @@ static int fuse_writepages_fill(struct page *page,
 			__free_page(tmp_page);
 			goto out_unlock;
 		}
+		fuse_writepage_add_to_bucket(fc, wpa);
+
 		data->max_pages = 1;
 
 		ap = &wpa->ia.ap;
@@ -2881,7 +2902,7 @@ fuse_direct_IO(struct kiocb *iocb, struct iov_iter *iter)
 
 static int fuse_writeback_range(struct inode *inode, loff_t start, loff_t end)
 {
-	int err = filemap_write_and_wait_range(inode->i_mapping, start, end);
+	int err = filemap_write_and_wait_range(inode->i_mapping, start, -1);
 
 	if (!err)
 		fuse_sync_writes(inode);
diff --git a/fs/fuse/fuse_i.h b/fs/fuse/fuse_i.h
index 3d18556a01ad..319596df5dc6 100644
--- a/fs/fuse/fuse_i.h
+++ b/fs/fuse/fuse_i.h
@@ -482,6 +482,7 @@ struct fuse_dev {
 
 struct fuse_fs_context {
 	int fd;
+	struct file *file;
 	unsigned int rootmode;
 	kuid_t user_id;
 	kgid_t group_id;
@@ -508,6 +509,13 @@ struct fuse_fs_context {
 	void **fudptr;
 };
 
+struct fuse_sync_bucket {
+	/* count is a possible scalability bottleneck */
+	atomic_t count;
+	wait_queue_head_t waitq;
+	struct rcu_head rcu;
+};
+
 /**
  * A Fuse connection.
  *
@@ -800,6 +808,9 @@ struct fuse_conn {
 
 	/** List of filesystems using this connection */
 	struct list_head mounts;
+
+	/* New writepages go into this bucket */
+	struct fuse_sync_bucket __rcu *curr_bucket;
 };
 
 /*
@@ -903,6 +914,15 @@ static inline void fuse_page_descs_length_init(struct fuse_page_desc *descs,
 		descs[i].length = PAGE_SIZE - descs[i].offset;
 }
 
+static inline void fuse_sync_bucket_dec(struct fuse_sync_bucket *bucket)
+{
+	/* Need RCU protection to prevent use after free after the decrement */
+	rcu_read_lock();
+	if (atomic_dec_and_test(&bucket->count))
+		wake_up(&bucket->waitq);
+	rcu_read_unlock();
+}
+
 /** Device operations */
 extern const struct file_operations fuse_dev_operations;
 
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index e07e429f32e1..36cd03114b6d 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -137,12 +137,12 @@ static void fuse_evict_inode(struct inode *inode)
 	}
 }
 
-static int fuse_reconfigure(struct fs_context *fc)
+static int fuse_reconfigure(struct fs_context *fsc)
 {
-	struct super_block *sb = fc->root->d_sb;
+	struct super_block *sb = fsc->root->d_sb;
 
 	sync_filesystem(sb);
-	if (fc->sb_flags & SB_MANDLOCK)
+	if (fsc->sb_flags & SB_MANDLOCK)
 		return -EINVAL;
 
 	return 0;
@@ -505,6 +505,57 @@ static int fuse_statfs(struct dentry *dentry, struct kstatfs *buf)
 	return err;
 }
 
+static struct fuse_sync_bucket *fuse_sync_bucket_alloc(void)
+{
+	struct fuse_sync_bucket *bucket;
+
+	bucket = kzalloc(sizeof(*bucket), GFP_KERNEL | __GFP_NOFAIL);
+	if (bucket) {
+		init_waitqueue_head(&bucket->waitq);
+		/* Initial active count */
+		atomic_set(&bucket->count, 1);
+	}
+	return bucket;
+}
+
+static void fuse_sync_fs_writes(struct fuse_conn *fc)
+{
+	struct fuse_sync_bucket *bucket, *new_bucket;
+	int count;
+
+	new_bucket = fuse_sync_bucket_alloc();
+	spin_lock(&fc->lock);
+	bucket = rcu_dereference_protected(fc->curr_bucket, 1);
+	count = atomic_read(&bucket->count);
+	WARN_ON(count < 1);
+	/* No outstanding writes? */
+	if (count == 1) {
+		spin_unlock(&fc->lock);
+		kfree(new_bucket);
+		return;
+	}
+
+	/*
+	 * Completion of new bucket depends on completion of this bucket, so add
+	 * one more count.
+	 */
+	atomic_inc(&new_bucket->count);
+	rcu_assign_pointer(fc->curr_bucket, new_bucket);
+	spin_unlock(&fc->lock);
+	/*
+	 * Drop initial active count.  At this point if all writes in this and
+	 * ancestor buckets complete, the count will go to zero and this task
+	 * will be woken up.
+	 */
+	atomic_dec(&bucket->count);
+
+	wait_event(bucket->waitq, atomic_read(&bucket->count) == 0);
+
+	/* Drop temp count on descendant bucket */
+	fuse_sync_bucket_dec(new_bucket);
+	kfree_rcu(bucket, rcu);
+}
+
 static int fuse_sync_fs(struct super_block *sb, int wait)
 {
 	struct fuse_mount *fm = get_fuse_mount_super(sb);
@@ -527,6 +578,8 @@ static int fuse_sync_fs(struct super_block *sb, int wait)
 	if (!fc->sync_fs)
 		return 0;
 
+	fuse_sync_fs_writes(fc);
+
 	memset(&inarg, 0, sizeof(inarg));
 	args.in_numargs = 1;
 	args.in_args[0].size = sizeof(inarg);
@@ -572,38 +625,38 @@ static const struct fs_parameter_spec fuse_fs_parameters[] = {
 	{}
 };
 
-static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param)
+static int fuse_parse_param(struct fs_context *fsc, struct fs_parameter *param)
 {
 	struct fs_parse_result result;
-	struct fuse_fs_context *ctx = fc->fs_private;
+	struct fuse_fs_context *ctx = fsc->fs_private;
 	int opt;
 
-	if (fc->purpose == FS_CONTEXT_FOR_RECONFIGURE) {
+	if (fsc->purpose == FS_CONTEXT_FOR_RECONFIGURE) {
 		/*
 		 * Ignore options coming from mount(MS_REMOUNT) for backward
 		 * compatibility.
 		 */
-		if (fc->oldapi)
+		if (fsc->oldapi)
 			return 0;
 
-		return invalfc(fc, "No changes allowed in reconfigure");
+		return invalfc(fsc, "No changes allowed in reconfigure");
 	}
 
-	opt = fs_parse(fc, fuse_fs_parameters, param, &result);
+	opt = fs_parse(fsc, fuse_fs_parameters, param, &result);
 	if (opt < 0)
 		return opt;
 
 	switch (opt) {
 	case OPT_SOURCE:
-		if (fc->source)
-			return invalfc(fc, "Multiple sources specified");
-		fc->source = param->string;
+		if (fsc->source)
+			return invalfc(fsc, "Multiple sources specified");
+		fsc->source = param->string;
 		param->string = NULL;
 		break;
 
 	case OPT_SUBTYPE:
 		if (ctx->subtype)
-			return invalfc(fc, "Multiple subtypes specified");
+			return invalfc(fsc, "Multiple subtypes specified");
 		ctx->subtype = param->string;
 		param->string = NULL;
 		return 0;
@@ -615,22 +668,22 @@ static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param)
 
 	case OPT_ROOTMODE:
 		if (!fuse_valid_type(result.uint_32))
-			return invalfc(fc, "Invalid rootmode");
+			return invalfc(fsc, "Invalid rootmode");
 		ctx->rootmode = result.uint_32;
 		ctx->rootmode_present = true;
 		break;
 
 	case OPT_USER_ID:
-		ctx->user_id = make_kuid(fc->user_ns, result.uint_32);
+		ctx->user_id = make_kuid(fsc->user_ns, result.uint_32);
 		if (!uid_valid(ctx->user_id))
-			return invalfc(fc, "Invalid user_id");
+			return invalfc(fsc, "Invalid user_id");
 		ctx->user_id_present = true;
 		break;
 
 	case OPT_GROUP_ID:
-		ctx->group_id = make_kgid(fc->user_ns, result.uint_32);
+		ctx->group_id = make_kgid(fsc->user_ns, result.uint_32);
 		if (!gid_valid(ctx->group_id))
-			return invalfc(fc, "Invalid group_id");
+			return invalfc(fsc, "Invalid group_id");
 		ctx->group_id_present = true;
 		break;
 
@@ -648,7 +701,7 @@ static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param)
 
 	case OPT_BLKSIZE:
 		if (!ctx->is_bdev)
-			return invalfc(fc, "blksize only supported for fuseblk");
+			return invalfc(fsc, "blksize only supported for fuseblk");
 		ctx->blksize = result.uint_32;
 		break;
 
@@ -659,9 +712,9 @@ static int fuse_parse_param(struct fs_context *fc, struct fs_parameter *param)
 	return 0;
 }
 
-static void fuse_free_fc(struct fs_context *fc)
+static void fuse_free_fsc(struct fs_context *fsc)
 {
-	struct fuse_fs_context *ctx = fc->fs_private;
+	struct fuse_fs_context *ctx = fsc->fs_private;
 
 	if (ctx) {
 		kfree(ctx->subtype);
@@ -762,6 +815,7 @@ void fuse_conn_put(struct fuse_conn *fc)
 {
 	if (refcount_dec_and_test(&fc->count)) {
 		struct fuse_iqueue *fiq = &fc->iq;
+		struct fuse_sync_bucket *bucket;
 
 		if (IS_ENABLED(CONFIG_FUSE_DAX))
 			fuse_dax_conn_free(fc);
@@ -769,6 +823,11 @@ void fuse_conn_put(struct fuse_conn *fc)
 			fiq->ops->release(fiq);
 		put_pid_ns(fc->pid_ns);
 		put_user_ns(fc->user_ns);
+		bucket = rcu_dereference_protected(fc->curr_bucket, 1);
+		if (bucket) {
+			WARN_ON(atomic_read(&bucket->count) != 1);
+			kfree(bucket);
+		}
 		fc->release(fc);
 	}
 }
@@ -1417,6 +1476,7 @@ int fuse_fill_super_common(struct super_block *sb, struct fuse_fs_context *ctx)
 	if (sb->s_flags & SB_MANDLOCK)
 		goto err;
 
+	rcu_assign_pointer(fc->curr_bucket, fuse_sync_bucket_alloc());
 	fuse_sb_defaults(sb);
 
 	if (ctx->is_bdev) {
@@ -1508,34 +1568,33 @@ EXPORT_SYMBOL_GPL(fuse_fill_super_common);
 static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc)
 {
 	struct fuse_fs_context *ctx = fsc->fs_private;
-	struct file *file;
 	int err;
 	struct fuse_conn *fc;
 	struct fuse_mount *fm;
 
-	err = -EINVAL;
-	file = fget(ctx->fd);
-	if (!file)
-		goto err;
+	if (!ctx->file || !ctx->rootmode_present ||
+	    !ctx->user_id_present || !ctx->group_id_present)
+		return -EINVAL;
 
 	/*
 	 * Require mount to happen from the same user namespace which
 	 * opened /dev/fuse to prevent potential attacks.
 	 */
-	if ((file->f_op != &fuse_dev_operations) ||
-	    (file->f_cred->user_ns != sb->s_user_ns))
-		goto err_fput;
-	ctx->fudptr = &file->private_data;
+	err = -EINVAL;
+	if ((ctx->file->f_op != &fuse_dev_operations) ||
+	    (ctx->file->f_cred->user_ns != sb->s_user_ns))
+		goto err;
+	ctx->fudptr = &ctx->file->private_data;
 
 	fc = kmalloc(sizeof(*fc), GFP_KERNEL);
 	err = -ENOMEM;
 	if (!fc)
-		goto err_fput;
+		goto err;
 
 	fm = kzalloc(sizeof(*fm), GFP_KERNEL);
 	if (!fm) {
 		kfree(fc);
-		goto err_fput;
+		goto err;
 	}
 
 	fuse_conn_init(fc, fm, sb->s_user_ns, &fuse_dev_fiq_ops, NULL);
@@ -1546,12 +1605,8 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc)
 	err = fuse_fill_super_common(sb, ctx);
 	if (err)
 		goto err_put_conn;
-	/*
-	 * atomic_dec_and_test() in fput() provides the necessary
-	 * memory barrier for file->private_data to be visible on all
-	 * CPUs after this
-	 */
-	fput(file);
+	/* file->private_data shall be visible on all CPUs after this */
+	smp_mb();
 	fuse_send_init(get_fuse_mount_super(sb));
 	return 0;
 
@@ -1559,30 +1614,68 @@ static int fuse_fill_super(struct super_block *sb, struct fs_context *fsc)
 	fuse_conn_put(fc);
 	kfree(fm);
 	sb->s_fs_info = NULL;
- err_fput:
-	fput(file);
  err:
 	return err;
 }
 
-static int fuse_get_tree(struct fs_context *fc)
+/*
+ * This is the path where user supplied an already initialized fuse dev.  In
+ * this case never create a new super if the old one is gone.
+ */
+static int fuse_set_no_super(struct super_block *sb, struct fs_context *fsc)
 {
-	struct fuse_fs_context *ctx = fc->fs_private;
+	return -ENOTCONN;
+}
 
-	if (!ctx->fd_present || !ctx->rootmode_present ||
-	    !ctx->user_id_present || !ctx->group_id_present)
-		return -EINVAL;
+static int fuse_test_super(struct super_block *sb, struct fs_context *fsc)
+{
 
-#ifdef CONFIG_BLOCK
-	if (ctx->is_bdev)
-		return get_tree_bdev(fc, fuse_fill_super);
-#endif
+	return fsc->sget_key == get_fuse_conn_super(sb);
+}
+
+static int fuse_get_tree(struct fs_context *fsc)
+{
+	struct fuse_fs_context *ctx = fsc->fs_private;
+	struct fuse_dev *fud;
+	struct super_block *sb;
+	int err;
 
-	return get_tree_nodev(fc, fuse_fill_super);
+	if (ctx->fd_present)
+		ctx->file = fget(ctx->fd);
+
+	if (IS_ENABLED(CONFIG_BLOCK) && ctx->is_bdev) {
+		err = get_tree_bdev(fsc, fuse_fill_super);
+		goto out_fput;
+	}
+	/*
+	 * While block dev mount can be initialized with a dummy device fd
+	 * (found by device name), normal fuse mounts can't
+	 */
+	if (!ctx->file)
+		return -EINVAL;
+
+	/*
+	 * Allow creating a fuse mount with an already initialized fuse
+	 * connection
+	 */
+	fud = READ_ONCE(ctx->file->private_data);
+	if (ctx->file->f_op == &fuse_dev_operations && fud) {
+		fsc->sget_key = fud->fc;
+		sb = sget_fc(fsc, fuse_test_super, fuse_set_no_super);
+		err = PTR_ERR_OR_ZERO(sb);
+		if (!IS_ERR(sb))
+			fsc->root = dget(sb->s_root);
+	} else {
+		err = get_tree_nodev(fsc, fuse_fill_super);
+	}
+out_fput:
+	if (ctx->file)
+		fput(ctx->file);
+	return err;
 }
 
 static const struct fs_context_operations fuse_context_ops = {
-	.free		= fuse_free_fc,
+	.free		= fuse_free_fsc,
 	.parse_param	= fuse_parse_param,
 	.reconfigure	= fuse_reconfigure,
 	.get_tree	= fuse_get_tree,
@@ -1591,7 +1684,7 @@ static const struct fs_context_operations fuse_context_ops = {
 /*
  * Set up the filesystem mount context.
  */
-static int fuse_init_fs_context(struct fs_context *fc)
+static int fuse_init_fs_context(struct fs_context *fsc)
 {
 	struct fuse_fs_context *ctx;
 
@@ -1604,14 +1697,14 @@ static int fuse_init_fs_context(struct fs_context *fc)
 	ctx->legacy_opts_show = true;
 
 #ifdef CONFIG_BLOCK
-	if (fc->fs_type == &fuseblk_fs_type) {
+	if (fsc->fs_type == &fuseblk_fs_type) {
 		ctx->is_bdev = true;
 		ctx->destroy = true;
 	}
 #endif
 
-	fc->fs_private = ctx;
-	fc->ops = &fuse_context_ops;
+	fsc->fs_private = ctx;
+	fsc->ops = &fuse_context_ops;
 	return 0;
 }
 
diff --git a/fs/fuse/virtio_fs.c b/fs/fuse/virtio_fs.c
index 8f52cdaa8445..0ad89c6629d7 100644
--- a/fs/fuse/virtio_fs.c
+++ b/fs/fuse/virtio_fs.c
@@ -97,14 +97,14 @@ static const struct fs_parameter_spec virtio_fs_parameters[] = {
 	{}
 };
 
-static int virtio_fs_parse_param(struct fs_context *fc,
+static int virtio_fs_parse_param(struct fs_context *fsc,
 				 struct fs_parameter *param)
 {
 	struct fs_parse_result result;
-	struct fuse_fs_context *ctx = fc->fs_private;
+	struct fuse_fs_context *ctx = fsc->fs_private;
 	int opt;
 
-	opt = fs_parse(fc, virtio_fs_parameters, param, &result);
+	opt = fs_parse(fsc, virtio_fs_parameters, param, &result);
 	if (opt < 0)
 		return opt;
 
@@ -119,9 +119,9 @@ static int virtio_fs_parse_param(struct fs_context *fc,
 	return 0;
 }
 
-static void virtio_fs_free_fc(struct fs_context *fc)
+static void virtio_fs_free_fsc(struct fs_context *fsc)
 {
-	struct fuse_fs_context *ctx = fc->fs_private;
+	struct fuse_fs_context *ctx = fsc->fs_private;
 
 	kfree(ctx);
 }
@@ -1488,7 +1488,7 @@ out_err:
 }
 
 static const struct fs_context_operations virtio_fs_context_ops = {
-	.free		= virtio_fs_free_fc,
+	.free		= virtio_fs_free_fsc,
 	.parse_param	= virtio_fs_parse_param,
 	.get_tree	= virtio_fs_get_tree,
 };
diff --git a/fs/gfs2/inode.c b/fs/gfs2/inode.c
index 6e15434b23ac..3130f85d2b3f 100644
--- a/fs/gfs2/inode.c
+++ b/fs/gfs2/inode.c
@@ -1985,8 +1985,8 @@ static int gfs2_setattr(struct user_namespace *mnt_userns,
 	if (error)
 		goto out;
 
-	error = -EPERM;
-	if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
+	error = may_setattr(&init_user_ns, inode, attr->ia_valid);
+	if (error)
 		goto error;
 
 	error = setattr_prepare(&init_user_ns, dentry, attr);
diff --git a/fs/hostfs/hostfs_kern.c b/fs/hostfs/hostfs_kern.c
index 7d0c3dbb2898..d5c9d886cd9f 100644
--- a/fs/hostfs/hostfs_kern.c
+++ b/fs/hostfs/hostfs_kern.c
@@ -381,6 +381,7 @@ static int hostfs_fsync(struct file *file, loff_t start, loff_t end,
 static const struct file_operations hostfs_file_fops = {
 	.llseek		= generic_file_llseek,
 	.splice_read	= generic_file_splice_read,
+	.splice_write	= iter_file_splice_write,
 	.read_iter	= generic_file_read_iter,
 	.write_iter	= generic_file_write_iter,
 	.mmap		= generic_file_mmap,
diff --git a/fs/internal.h b/fs/internal.h
index 68a2ae029a27..3cd065c8a66b 100644
--- a/fs/internal.h
+++ b/fs/internal.h
@@ -18,7 +18,7 @@ struct user_namespace;
 struct pipe_inode_info;
 
 /*
- * block_dev.c
+ * block/bdev.c
  */
 #ifdef CONFIG_BLOCK
 extern void __init bdev_cache_init(void);
diff --git a/fs/io-wq.c b/fs/io-wq.c
index cd9bd095fb1b..6c55362c1f99 100644
--- a/fs/io-wq.c
+++ b/fs/io-wq.c
@@ -23,8 +23,7 @@ enum {
 	IO_WORKER_F_UP		= 1,	/* up and active */
 	IO_WORKER_F_RUNNING	= 2,	/* account as running */
 	IO_WORKER_F_FREE	= 4,	/* worker on free list */
-	IO_WORKER_F_FIXED	= 8,	/* static idle worker */
-	IO_WORKER_F_BOUND	= 16,	/* is doing bounded work */
+	IO_WORKER_F_BOUND	= 8,	/* is doing bounded work */
 };
 
 enum {
@@ -32,7 +31,7 @@ enum {
 };
 
 enum {
-	IO_WQE_FLAG_STALLED	= 1,	/* stalled on hash */
+	IO_ACCT_STALLED_BIT	= 0,	/* stalled on hash */
 };
 
 /*
@@ -55,7 +54,10 @@ struct io_worker {
 	struct callback_head create_work;
 	int create_index;
 
-	struct rcu_head rcu;
+	union {
+		struct rcu_head rcu;
+		struct work_struct work;
+	};
 };
 
 #if BITS_PER_LONG == 64
@@ -71,25 +73,24 @@ struct io_wqe_acct {
 	unsigned max_workers;
 	int index;
 	atomic_t nr_running;
+	struct io_wq_work_list work_list;
+	unsigned long flags;
 };
 
 enum {
 	IO_WQ_ACCT_BOUND,
 	IO_WQ_ACCT_UNBOUND,
+	IO_WQ_ACCT_NR,
 };
 
 /*
  * Per-node worker thread pool
  */
 struct io_wqe {
-	struct {
-		raw_spinlock_t lock;
-		struct io_wq_work_list work_list;
-		unsigned flags;
-	} ____cacheline_aligned_in_smp;
+	raw_spinlock_t lock;
+	struct io_wqe_acct acct[2];
 
 	int node;
-	struct io_wqe_acct acct[2];
 
 	struct hlist_nulls_head free_list;
 	struct list_head all_list;
@@ -133,8 +134,11 @@ struct io_cb_cancel_data {
 	bool cancel_all;
 };
 
-static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index, bool first);
+static bool create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index);
 static void io_wqe_dec_running(struct io_worker *worker);
+static bool io_acct_cancel_pending_work(struct io_wqe *wqe,
+					struct io_wqe_acct *acct,
+					struct io_cb_cancel_data *match);
 
 static bool io_worker_get(struct io_worker *worker)
 {
@@ -195,11 +199,10 @@ static void io_worker_exit(struct io_worker *worker)
 	do_exit(0);
 }
 
-static inline bool io_wqe_run_queue(struct io_wqe *wqe)
-	__must_hold(wqe->lock)
+static inline bool io_acct_run_queue(struct io_wqe_acct *acct)
 {
-	if (!wq_list_empty(&wqe->work_list) &&
-	    !(wqe->flags & IO_WQE_FLAG_STALLED))
+	if (!wq_list_empty(&acct->work_list) &&
+	    !test_bit(IO_ACCT_STALLED_BIT, &acct->flags))
 		return true;
 	return false;
 }
@@ -208,7 +211,8 @@ static inline bool io_wqe_run_queue(struct io_wqe *wqe)
  * Check head of free list for an available worker. If one isn't available,
  * caller must create one.
  */
-static bool io_wqe_activate_free_worker(struct io_wqe *wqe)
+static bool io_wqe_activate_free_worker(struct io_wqe *wqe,
+					struct io_wqe_acct *acct)
 	__must_hold(RCU)
 {
 	struct hlist_nulls_node *n;
@@ -222,6 +226,10 @@ static bool io_wqe_activate_free_worker(struct io_wqe *wqe)
 	hlist_nulls_for_each_entry_rcu(worker, n, &wqe->free_list, nulls_node) {
 		if (!io_worker_get(worker))
 			continue;
+		if (io_wqe_get_acct(worker) != acct) {
+			io_worker_release(worker);
+			continue;
+		}
 		if (wake_up_process(worker->task)) {
 			io_worker_release(worker);
 			return true;
@@ -236,9 +244,9 @@ static bool io_wqe_activate_free_worker(struct io_wqe *wqe)
  * We need a worker. If we find a free one, we're good. If not, and we're
  * below the max number of workers, create one.
  */
-static void io_wqe_wake_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)
+static bool io_wqe_create_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)
 {
-	bool ret;
+	bool do_create = false;
 
 	/*
 	 * Most likely an attempt to queue unbounded work on an io_wq that
@@ -247,27 +255,19 @@ static void io_wqe_wake_worker(struct io_wqe *wqe, struct io_wqe_acct *acct)
 	if (unlikely(!acct->max_workers))
 		pr_warn_once("io-wq is not configured for unbound workers");
 
-	rcu_read_lock();
-	ret = io_wqe_activate_free_worker(wqe);
-	rcu_read_unlock();
-
-	if (!ret) {
-		bool do_create = false, first = false;
-
-		raw_spin_lock(&wqe->lock);
-		if (acct->nr_workers < acct->max_workers) {
-			if (!acct->nr_workers)
-				first = true;
-			acct->nr_workers++;
-			do_create = true;
-		}
-		raw_spin_unlock(&wqe->lock);
-		if (do_create) {
-			atomic_inc(&acct->nr_running);
-			atomic_inc(&wqe->wq->worker_refs);
-			create_io_worker(wqe->wq, wqe, acct->index, first);
-		}
+	raw_spin_lock(&wqe->lock);
+	if (acct->nr_workers < acct->max_workers) {
+		acct->nr_workers++;
+		do_create = true;
 	}
+	raw_spin_unlock(&wqe->lock);
+	if (do_create) {
+		atomic_inc(&acct->nr_running);
+		atomic_inc(&wqe->wq->worker_refs);
+		return create_io_worker(wqe->wq, wqe, acct->index);
+	}
+
+	return true;
 }
 
 static void io_wqe_inc_running(struct io_worker *worker)
@@ -283,7 +283,7 @@ static void create_worker_cb(struct callback_head *cb)
 	struct io_wq *wq;
 	struct io_wqe *wqe;
 	struct io_wqe_acct *acct;
-	bool do_create = false, first = false;
+	bool do_create = false;
 
 	worker = container_of(cb, struct io_worker, create_work);
 	wqe = worker->wqe;
@@ -291,14 +291,12 @@ static void create_worker_cb(struct callback_head *cb)
 	acct = &wqe->acct[worker->create_index];
 	raw_spin_lock(&wqe->lock);
 	if (acct->nr_workers < acct->max_workers) {
-		if (!acct->nr_workers)
-			first = true;
 		acct->nr_workers++;
 		do_create = true;
 	}
 	raw_spin_unlock(&wqe->lock);
 	if (do_create) {
-		create_io_worker(wq, wqe, worker->create_index, first);
+		create_io_worker(wq, wqe, worker->create_index);
 	} else {
 		atomic_dec(&acct->nr_running);
 		io_worker_ref_put(wq);
@@ -307,9 +305,11 @@ static void create_worker_cb(struct callback_head *cb)
 	io_worker_release(worker);
 }
 
-static void io_queue_worker_create(struct io_wqe *wqe, struct io_worker *worker,
-				   struct io_wqe_acct *acct)
+static bool io_queue_worker_create(struct io_worker *worker,
+				   struct io_wqe_acct *acct,
+				   task_work_func_t func)
 {
+	struct io_wqe *wqe = worker->wqe;
 	struct io_wq *wq = wqe->wq;
 
 	/* raced with exit, just ignore create call */
@@ -327,16 +327,17 @@ static void io_queue_worker_create(struct io_wqe *wqe, struct io_worker *worker,
 	    test_and_set_bit_lock(0, &worker->create_state))
 		goto fail_release;
 
-	init_task_work(&worker->create_work, create_worker_cb);
+	init_task_work(&worker->create_work, func);
 	worker->create_index = acct->index;
 	if (!task_work_add(wq->task, &worker->create_work, TWA_SIGNAL))
-		return;
+		return true;
 	clear_bit_unlock(0, &worker->create_state);
 fail_release:
 	io_worker_release(worker);
 fail:
 	atomic_dec(&acct->nr_running);
 	io_worker_ref_put(wq);
+	return false;
 }
 
 static void io_wqe_dec_running(struct io_worker *worker)
@@ -348,10 +349,10 @@ static void io_wqe_dec_running(struct io_worker *worker)
 	if (!(worker->flags & IO_WORKER_F_UP))
 		return;
 
-	if (atomic_dec_and_test(&acct->nr_running) && io_wqe_run_queue(wqe)) {
+	if (atomic_dec_and_test(&acct->nr_running) && io_acct_run_queue(acct)) {
 		atomic_inc(&acct->nr_running);
 		atomic_inc(&wqe->wq->worker_refs);
-		io_queue_worker_create(wqe, worker, acct);
+		io_queue_worker_create(worker, acct, create_worker_cb);
 	}
 }
 
@@ -363,29 +364,10 @@ static void __io_worker_busy(struct io_wqe *wqe, struct io_worker *worker,
 			     struct io_wq_work *work)
 	__must_hold(wqe->lock)
 {
-	bool worker_bound, work_bound;
-
-	BUILD_BUG_ON((IO_WQ_ACCT_UNBOUND ^ IO_WQ_ACCT_BOUND) != 1);
-
 	if (worker->flags & IO_WORKER_F_FREE) {
 		worker->flags &= ~IO_WORKER_F_FREE;
 		hlist_nulls_del_init_rcu(&worker->nulls_node);
 	}
-
-	/*
-	 * If worker is moving from bound to unbound (or vice versa), then
-	 * ensure we update the running accounting.
-	 */
-	worker_bound = (worker->flags & IO_WORKER_F_BOUND) != 0;
-	work_bound = (work->flags & IO_WQ_WORK_UNBOUND) == 0;
-	if (worker_bound != work_bound) {
-		int index = work_bound ? IO_WQ_ACCT_UNBOUND : IO_WQ_ACCT_BOUND;
-		io_wqe_dec_running(worker);
-		worker->flags ^= IO_WORKER_F_BOUND;
-		wqe->acct[index].nr_workers--;
-		wqe->acct[index ^ 1].nr_workers++;
-		io_wqe_inc_running(worker);
-	 }
 }
 
 /*
@@ -413,7 +395,7 @@ static void io_wait_on_hash(struct io_wqe *wqe, unsigned int hash)
 {
 	struct io_wq *wq = wqe->wq;
 
-	spin_lock(&wq->hash->wait.lock);
+	spin_lock_irq(&wq->hash->wait.lock);
 	if (list_empty(&wqe->wait.entry)) {
 		__add_wait_queue(&wq->hash->wait, &wqe->wait);
 		if (!test_bit(hash, &wq->hash->map)) {
@@ -421,48 +403,26 @@ static void io_wait_on_hash(struct io_wqe *wqe, unsigned int hash)
 			list_del_init(&wqe->wait.entry);
 		}
 	}
-	spin_unlock(&wq->hash->wait.lock);
-}
-
-/*
- * We can always run the work if the worker is currently the same type as
- * the work (eg both are bound, or both are unbound). If they are not the
- * same, only allow it if incrementing the worker count would be allowed.
- */
-static bool io_worker_can_run_work(struct io_worker *worker,
-				   struct io_wq_work *work)
-{
-	struct io_wqe_acct *acct;
-
-	if (!(worker->flags & IO_WORKER_F_BOUND) !=
-	    !(work->flags & IO_WQ_WORK_UNBOUND))
-		return true;
-
-	/* not the same type, check if we'd go over the limit */
-	acct = io_work_get_acct(worker->wqe, work);
-	return acct->nr_workers < acct->max_workers;
+	spin_unlock_irq(&wq->hash->wait.lock);
 }
 
-static struct io_wq_work *io_get_next_work(struct io_wqe *wqe,
-					   struct io_worker *worker,
-					   bool *stalled)
+static struct io_wq_work *io_get_next_work(struct io_wqe_acct *acct,
+					   struct io_worker *worker)
 	__must_hold(wqe->lock)
 {
 	struct io_wq_work_node *node, *prev;
 	struct io_wq_work *work, *tail;
 	unsigned int stall_hash = -1U;
+	struct io_wqe *wqe = worker->wqe;
 
-	wq_list_for_each(node, prev, &wqe->work_list) {
+	wq_list_for_each(node, prev, &acct->work_list) {
 		unsigned int hash;
 
 		work = container_of(node, struct io_wq_work, list);
 
-		if (!io_worker_can_run_work(worker, work))
-			break;
-
 		/* not hashed, can run anytime */
 		if (!io_wq_is_hashed(work)) {
-			wq_list_del(&wqe->work_list, node, prev);
+			wq_list_del(&acct->work_list, node, prev);
 			return work;
 		}
 
@@ -473,7 +433,7 @@ static struct io_wq_work *io_get_next_work(struct io_wqe *wqe,
 		/* hashed, can run if not already running */
 		if (!test_and_set_bit(hash, &wqe->wq->hash->map)) {
 			wqe->hash_tail[hash] = NULL;
-			wq_list_cut(&wqe->work_list, &tail->list, prev);
+			wq_list_cut(&acct->work_list, &tail->list, prev);
 			return work;
 		}
 		if (stall_hash == -1U)
@@ -483,10 +443,14 @@ static struct io_wq_work *io_get_next_work(struct io_wqe *wqe,
 	}
 
 	if (stall_hash != -1U) {
+		/*
+		 * Set this before dropping the lock to avoid racing with new
+		 * work being added and clearing the stalled bit.
+		 */
+		set_bit(IO_ACCT_STALLED_BIT, &acct->flags);
 		raw_spin_unlock(&wqe->lock);
 		io_wait_on_hash(wqe, stall_hash);
 		raw_spin_lock(&wqe->lock);
-		*stalled = true;
 	}
 
 	return NULL;
@@ -520,13 +484,13 @@ static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work);
 static void io_worker_handle_work(struct io_worker *worker)
 	__releases(wqe->lock)
 {
+	struct io_wqe_acct *acct = io_wqe_get_acct(worker);
 	struct io_wqe *wqe = worker->wqe;
 	struct io_wq *wq = wqe->wq;
 	bool do_kill = test_bit(IO_WQ_BIT_EXIT, &wq->state);
 
 	do {
 		struct io_wq_work *work;
-		bool stalled;
 get_next:
 		/*
 		 * If we got some work, mark us as busy. If we didn't, but
@@ -535,12 +499,9 @@ get_next:
 		 * can't make progress, any work completion or insertion will
 		 * clear the stalled flag.
 		 */
-		stalled = false;
-		work = io_get_next_work(wqe, worker, &stalled);
+		work = io_get_next_work(acct, worker);
 		if (work)
 			__io_worker_busy(wqe, worker, work);
-		else if (stalled)
-			wqe->flags |= IO_WQE_FLAG_STALLED;
 
 		raw_spin_unlock(&wqe->lock);
 		if (!work)
@@ -572,10 +533,10 @@ get_next:
 
 			if (hash != -1U && !next_hashed) {
 				clear_bit(hash, &wq->hash->map);
+				clear_bit(IO_ACCT_STALLED_BIT, &acct->flags);
 				if (wq_has_sleeper(&wq->hash->wait))
 					wake_up(&wq->hash->wait);
 				raw_spin_lock(&wqe->lock);
-				wqe->flags &= ~IO_WQE_FLAG_STALLED;
 				/* skip unnecessary unlock-lock wqe->lock */
 				if (!work)
 					goto get_next;
@@ -590,8 +551,10 @@ get_next:
 static int io_wqe_worker(void *data)
 {
 	struct io_worker *worker = data;
+	struct io_wqe_acct *acct = io_wqe_get_acct(worker);
 	struct io_wqe *wqe = worker->wqe;
 	struct io_wq *wq = wqe->wq;
+	bool last_timeout = false;
 	char buf[TASK_COMM_LEN];
 
 	worker->flags |= (IO_WORKER_F_UP | IO_WORKER_F_RUNNING);
@@ -605,10 +568,17 @@ static int io_wqe_worker(void *data)
 		set_current_state(TASK_INTERRUPTIBLE);
 loop:
 		raw_spin_lock(&wqe->lock);
-		if (io_wqe_run_queue(wqe)) {
+		if (io_acct_run_queue(acct)) {
 			io_worker_handle_work(worker);
 			goto loop;
 		}
+		/* timed out, exit unless we're the last worker */
+		if (last_timeout && acct->nr_workers > 1) {
+			raw_spin_unlock(&wqe->lock);
+			__set_current_state(TASK_RUNNING);
+			break;
+		}
+		last_timeout = false;
 		__io_worker_idle(wqe, worker);
 		raw_spin_unlock(&wqe->lock);
 		if (io_flush_signals())
@@ -619,13 +589,11 @@ loop:
 
 			if (!get_signal(&ksig))
 				continue;
-			break;
-		}
-		if (ret)
+			if (fatal_signal_pending(current))
+				break;
 			continue;
-		/* timed out, exit unless we're the fixed worker */
-		if (!(worker->flags & IO_WORKER_F_FIXED))
-			break;
+		}
+		last_timeout = !ret;
 	}
 
 	if (test_bit(IO_WQ_BIT_EXIT, &wq->state)) {
@@ -676,51 +644,131 @@ void io_wq_worker_sleeping(struct task_struct *tsk)
 	raw_spin_unlock(&worker->wqe->lock);
 }
 
-static void create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index, bool first)
+static void io_init_new_worker(struct io_wqe *wqe, struct io_worker *worker,
+			       struct task_struct *tsk)
+{
+	tsk->pf_io_worker = worker;
+	worker->task = tsk;
+	set_cpus_allowed_ptr(tsk, wqe->cpu_mask);
+	tsk->flags |= PF_NO_SETAFFINITY;
+
+	raw_spin_lock(&wqe->lock);
+	hlist_nulls_add_head_rcu(&worker->nulls_node, &wqe->free_list);
+	list_add_tail_rcu(&worker->all_list, &wqe->all_list);
+	worker->flags |= IO_WORKER_F_FREE;
+	raw_spin_unlock(&wqe->lock);
+	wake_up_new_task(tsk);
+}
+
+static bool io_wq_work_match_all(struct io_wq_work *work, void *data)
+{
+	return true;
+}
+
+static inline bool io_should_retry_thread(long err)
+{
+	switch (err) {
+	case -EAGAIN:
+	case -ERESTARTSYS:
+	case -ERESTARTNOINTR:
+	case -ERESTARTNOHAND:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static void create_worker_cont(struct callback_head *cb)
 {
-	struct io_wqe_acct *acct = &wqe->acct[index];
 	struct io_worker *worker;
 	struct task_struct *tsk;
+	struct io_wqe *wqe;
 
-	__set_current_state(TASK_RUNNING);
+	worker = container_of(cb, struct io_worker, create_work);
+	clear_bit_unlock(0, &worker->create_state);
+	wqe = worker->wqe;
+	tsk = create_io_thread(io_wqe_worker, worker, wqe->node);
+	if (!IS_ERR(tsk)) {
+		io_init_new_worker(wqe, worker, tsk);
+		io_worker_release(worker);
+		return;
+	} else if (!io_should_retry_thread(PTR_ERR(tsk))) {
+		struct io_wqe_acct *acct = io_wqe_get_acct(worker);
 
-	worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, wqe->node);
-	if (!worker)
-		goto fail;
+		atomic_dec(&acct->nr_running);
+		raw_spin_lock(&wqe->lock);
+		acct->nr_workers--;
+		if (!acct->nr_workers) {
+			struct io_cb_cancel_data match = {
+				.fn		= io_wq_work_match_all,
+				.cancel_all	= true,
+			};
 
-	refcount_set(&worker->ref, 1);
-	worker->nulls_node.pprev = NULL;
-	worker->wqe = wqe;
-	spin_lock_init(&worker->lock);
-	init_completion(&worker->ref_done);
+			while (io_acct_cancel_pending_work(wqe, acct, &match))
+				raw_spin_lock(&wqe->lock);
+		}
+		raw_spin_unlock(&wqe->lock);
+		io_worker_ref_put(wqe->wq);
+		kfree(worker);
+		return;
+	}
 
-	tsk = create_io_thread(io_wqe_worker, worker, wqe->node);
-	if (IS_ERR(tsk)) {
+	/* re-create attempts grab a new worker ref, drop the existing one */
+	io_worker_release(worker);
+	schedule_work(&worker->work);
+}
+
+static void io_workqueue_create(struct work_struct *work)
+{
+	struct io_worker *worker = container_of(work, struct io_worker, work);
+	struct io_wqe_acct *acct = io_wqe_get_acct(worker);
+
+	if (!io_queue_worker_create(worker, acct, create_worker_cont)) {
+		clear_bit_unlock(0, &worker->create_state);
+		io_worker_release(worker);
 		kfree(worker);
+	}
+}
+
+static bool create_io_worker(struct io_wq *wq, struct io_wqe *wqe, int index)
+{
+	struct io_wqe_acct *acct = &wqe->acct[index];
+	struct io_worker *worker;
+	struct task_struct *tsk;
+
+	__set_current_state(TASK_RUNNING);
+
+	worker = kzalloc_node(sizeof(*worker), GFP_KERNEL, wqe->node);
+	if (!worker) {
 fail:
 		atomic_dec(&acct->nr_running);
 		raw_spin_lock(&wqe->lock);
 		acct->nr_workers--;
 		raw_spin_unlock(&wqe->lock);
 		io_worker_ref_put(wq);
-		return;
+		return false;
 	}
 
-	tsk->pf_io_worker = worker;
-	worker->task = tsk;
-	set_cpus_allowed_ptr(tsk, wqe->cpu_mask);
-	tsk->flags |= PF_NO_SETAFFINITY;
+	refcount_set(&worker->ref, 1);
+	worker->wqe = wqe;
+	spin_lock_init(&worker->lock);
+	init_completion(&worker->ref_done);
 
-	raw_spin_lock(&wqe->lock);
-	hlist_nulls_add_head_rcu(&worker->nulls_node, &wqe->free_list);
-	list_add_tail_rcu(&worker->all_list, &wqe->all_list);
-	worker->flags |= IO_WORKER_F_FREE;
 	if (index == IO_WQ_ACCT_BOUND)
 		worker->flags |= IO_WORKER_F_BOUND;
-	if (first && (worker->flags & IO_WORKER_F_BOUND))
-		worker->flags |= IO_WORKER_F_FIXED;
-	raw_spin_unlock(&wqe->lock);
-	wake_up_new_task(tsk);
+
+	tsk = create_io_thread(io_wqe_worker, worker, wqe->node);
+	if (!IS_ERR(tsk)) {
+		io_init_new_worker(wqe, worker, tsk);
+	} else if (!io_should_retry_thread(PTR_ERR(tsk))) {
+		kfree(worker);
+		goto fail;
+	} else {
+		INIT_WORK(&worker->work, io_workqueue_create);
+		schedule_work(&worker->work);
+	}
+
+	return true;
 }
 
 /*
@@ -755,11 +803,6 @@ static bool io_wq_worker_wake(struct io_worker *worker, void *data)
 	return false;
 }
 
-static bool io_wq_work_match_all(struct io_wq_work *work, void *data)
-{
-	return true;
-}
-
 static void io_run_cancel(struct io_wq_work *work, struct io_wqe *wqe)
 {
 	struct io_wq *wq = wqe->wq;
@@ -773,12 +816,13 @@ static void io_run_cancel(struct io_wq_work *work, struct io_wqe *wqe)
 
 static void io_wqe_insert_work(struct io_wqe *wqe, struct io_wq_work *work)
 {
+	struct io_wqe_acct *acct = io_work_get_acct(wqe, work);
 	unsigned int hash;
 	struct io_wq_work *tail;
 
 	if (!io_wq_is_hashed(work)) {
 append:
-		wq_list_add_tail(&work->list, &wqe->work_list);
+		wq_list_add_tail(&work->list, &acct->work_list);
 		return;
 	}
 
@@ -788,13 +832,19 @@ append:
 	if (!tail)
 		goto append;
 
-	wq_list_add_after(&work->list, &tail->list, &wqe->work_list);
+	wq_list_add_after(&work->list, &tail->list, &acct->work_list);
+}
+
+static bool io_wq_work_match_item(struct io_wq_work *work, void *data)
+{
+	return work == data;
 }
 
 static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work)
 {
 	struct io_wqe_acct *acct = io_work_get_acct(wqe, work);
-	bool do_wake;
+	unsigned work_flags = work->flags;
+	bool do_create;
 
 	/*
 	 * If io-wq is exiting for this task, or if the request has explicitly
@@ -808,13 +858,36 @@ static void io_wqe_enqueue(struct io_wqe *wqe, struct io_wq_work *work)
 
 	raw_spin_lock(&wqe->lock);
 	io_wqe_insert_work(wqe, work);
-	wqe->flags &= ~IO_WQE_FLAG_STALLED;
-	do_wake = (work->flags & IO_WQ_WORK_CONCURRENT) ||
-			!atomic_read(&acct->nr_running);
+	clear_bit(IO_ACCT_STALLED_BIT, &acct->flags);
+
+	rcu_read_lock();
+	do_create = !io_wqe_activate_free_worker(wqe, acct);
+	rcu_read_unlock();
+
 	raw_spin_unlock(&wqe->lock);
 
-	if (do_wake)
-		io_wqe_wake_worker(wqe, acct);
+	if (do_create && ((work_flags & IO_WQ_WORK_CONCURRENT) ||
+	    !atomic_read(&acct->nr_running))) {
+		bool did_create;
+
+		did_create = io_wqe_create_worker(wqe, acct);
+		if (likely(did_create))
+			return;
+
+		raw_spin_lock(&wqe->lock);
+		/* fatal condition, failed to create the first worker */
+		if (!acct->nr_workers) {
+			struct io_cb_cancel_data match = {
+				.fn		= io_wq_work_match_item,
+				.data		= work,
+				.cancel_all	= false,
+			};
+
+			if (io_acct_cancel_pending_work(wqe, acct, &match))
+				raw_spin_lock(&wqe->lock);
+		}
+		raw_spin_unlock(&wqe->lock);
+	}
 }
 
 void io_wq_enqueue(struct io_wq *wq, struct io_wq_work *work)
@@ -859,6 +932,7 @@ static inline void io_wqe_remove_pending(struct io_wqe *wqe,
 					 struct io_wq_work *work,
 					 struct io_wq_work_node *prev)
 {
+	struct io_wqe_acct *acct = io_work_get_acct(wqe, work);
 	unsigned int hash = io_get_work_hash(work);
 	struct io_wq_work *prev_work = NULL;
 
@@ -870,18 +944,18 @@ static inline void io_wqe_remove_pending(struct io_wqe *wqe,
 		else
 			wqe->hash_tail[hash] = NULL;
 	}
-	wq_list_del(&wqe->work_list, &work->list, prev);
+	wq_list_del(&acct->work_list, &work->list, prev);
 }
 
-static void io_wqe_cancel_pending_work(struct io_wqe *wqe,
-				       struct io_cb_cancel_data *match)
+static bool io_acct_cancel_pending_work(struct io_wqe *wqe,
+					struct io_wqe_acct *acct,
+					struct io_cb_cancel_data *match)
+	__releases(wqe->lock)
 {
 	struct io_wq_work_node *node, *prev;
 	struct io_wq_work *work;
 
-retry:
-	raw_spin_lock(&wqe->lock);
-	wq_list_for_each(node, prev, &wqe->work_list) {
+	wq_list_for_each(node, prev, &acct->work_list) {
 		work = container_of(node, struct io_wq_work, list);
 		if (!match->fn(work, match->data))
 			continue;
@@ -889,11 +963,27 @@ retry:
 		raw_spin_unlock(&wqe->lock);
 		io_run_cancel(work, wqe);
 		match->nr_pending++;
-		if (!match->cancel_all)
-			return;
-
 		/* not safe to continue after unlock */
-		goto retry;
+		return true;
+	}
+
+	return false;
+}
+
+static void io_wqe_cancel_pending_work(struct io_wqe *wqe,
+				       struct io_cb_cancel_data *match)
+{
+	int i;
+retry:
+	raw_spin_lock(&wqe->lock);
+	for (i = 0; i < IO_WQ_ACCT_NR; i++) {
+		struct io_wqe_acct *acct = io_get_acct(wqe, i == 0);
+
+		if (io_acct_cancel_pending_work(wqe, acct, match)) {
+			if (match->cancel_all)
+				goto retry;
+			return;
+		}
 	}
 	raw_spin_unlock(&wqe->lock);
 }
@@ -954,18 +1044,24 @@ static int io_wqe_hash_wake(struct wait_queue_entry *wait, unsigned mode,
 			    int sync, void *key)
 {
 	struct io_wqe *wqe = container_of(wait, struct io_wqe, wait);
+	int i;
 
 	list_del_init(&wait->entry);
 
 	rcu_read_lock();
-	io_wqe_activate_free_worker(wqe);
+	for (i = 0; i < IO_WQ_ACCT_NR; i++) {
+		struct io_wqe_acct *acct = &wqe->acct[i];
+
+		if (test_and_clear_bit(IO_ACCT_STALLED_BIT, &acct->flags))
+			io_wqe_activate_free_worker(wqe, acct);
+	}
 	rcu_read_unlock();
 	return 1;
 }
 
 struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
 {
-	int ret, node;
+	int ret, node, i;
 	struct io_wq *wq;
 
 	if (WARN_ON_ONCE(!data->free_work || !data->do_work))
@@ -1000,18 +1096,20 @@ struct io_wq *io_wq_create(unsigned bounded, struct io_wq_data *data)
 		cpumask_copy(wqe->cpu_mask, cpumask_of_node(node));
 		wq->wqes[node] = wqe;
 		wqe->node = alloc_node;
-		wqe->acct[IO_WQ_ACCT_BOUND].index = IO_WQ_ACCT_BOUND;
-		wqe->acct[IO_WQ_ACCT_UNBOUND].index = IO_WQ_ACCT_UNBOUND;
 		wqe->acct[IO_WQ_ACCT_BOUND].max_workers = bounded;
-		atomic_set(&wqe->acct[IO_WQ_ACCT_BOUND].nr_running, 0);
 		wqe->acct[IO_WQ_ACCT_UNBOUND].max_workers =
 					task_rlimit(current, RLIMIT_NPROC);
-		atomic_set(&wqe->acct[IO_WQ_ACCT_UNBOUND].nr_running, 0);
-		wqe->wait.func = io_wqe_hash_wake;
 		INIT_LIST_HEAD(&wqe->wait.entry);
+		wqe->wait.func = io_wqe_hash_wake;
+		for (i = 0; i < IO_WQ_ACCT_NR; i++) {
+			struct io_wqe_acct *acct = &wqe->acct[i];
+
+			acct->index = i;
+			atomic_set(&acct->nr_running, 0);
+			INIT_WQ_LIST(&acct->work_list);
+		}
 		wqe->wq = wq;
 		raw_spin_lock_init(&wqe->lock);
-		INIT_WQ_LIST(&wqe->work_list);
 		INIT_HLIST_NULLS_HEAD(&wqe->free_list, 0);
 		INIT_LIST_HEAD(&wqe->all_list);
 	}
@@ -1038,7 +1136,7 @@ static bool io_task_work_match(struct callback_head *cb, void *data)
 {
 	struct io_worker *worker;
 
-	if (cb->func != create_worker_cb)
+	if (cb->func != create_worker_cb && cb->func != create_worker_cont)
 		return false;
 	worker = container_of(cb, struct io_worker, create_work);
 	return worker->wqe->wq == data;
@@ -1059,9 +1157,14 @@ static void io_wq_exit_workers(struct io_wq *wq)
 
 	while ((cb = task_work_cancel_match(wq->task, io_task_work_match, wq)) != NULL) {
 		struct io_worker *worker;
+		struct io_wqe_acct *acct;
 
 		worker = container_of(cb, struct io_worker, create_work);
-		atomic_dec(&worker->wqe->acct[worker->create_index].nr_running);
+		acct = io_wqe_get_acct(worker);
+		atomic_dec(&acct->nr_running);
+		raw_spin_lock(&worker->wqe->lock);
+		acct->nr_workers--;
+		raw_spin_unlock(&worker->wqe->lock);
 		io_worker_ref_put(wq);
 		clear_bit_unlock(0, &worker->create_state);
 		io_worker_release(worker);
@@ -1193,7 +1296,7 @@ int io_wq_max_workers(struct io_wq *wq, int *new_count)
 	for_each_node(node) {
 		struct io_wqe_acct *acct;
 
-		for (i = 0; i < 2; i++) {
+		for (i = 0; i < IO_WQ_ACCT_NR; i++) {
 			acct = &wq->wqes[node]->acct[i];
 			prev = max_t(int, acct->max_workers, prev);
 			if (new_count[i])
diff --git a/fs/io_uring.c b/fs/io_uring.c
index 6f35b1285865..16fb7436043c 100644
--- a/fs/io_uring.c
+++ b/fs/io_uring.c
@@ -1021,6 +1021,7 @@ static const struct io_op_def io_op_defs[] = {
 	},
 	[IORING_OP_WRITE] = {
 		.needs_file		= 1,
+		.hash_reg_file		= 1,
 		.unbound_nonreg_file	= 1,
 		.pollout		= 1,
 		.plug			= 1,
@@ -1481,6 +1482,8 @@ static void io_kill_timeout(struct io_kiocb *req, int status)
 	struct io_timeout_data *io = req->async_data;
 
 	if (hrtimer_try_to_cancel(&io->timer) != -1) {
+		if (status)
+			req_set_fail(req);
 		atomic_set(&req->ctx->cq_timeouts,
 			atomic_read(&req->ctx->cq_timeouts) + 1);
 		list_del_init(&req->timeout.list);
@@ -1618,8 +1621,11 @@ static void io_cqring_ev_posted(struct io_ring_ctx *ctx)
 
 static void io_cqring_ev_posted_iopoll(struct io_ring_ctx *ctx)
 {
+	/* see waitqueue_active() comment */
+	smp_mb();
+
 	if (ctx->flags & IORING_SETUP_SQPOLL) {
-		if (wq_has_sleeper(&ctx->cq_wait))
+		if (waitqueue_active(&ctx->cq_wait))
 			wake_up_all(&ctx->cq_wait);
 	}
 	if (io_should_trigger_evfd(ctx))
@@ -1851,6 +1857,17 @@ static void io_req_complete_failed(struct io_kiocb *req, long res)
 	io_req_complete_post(req, res, 0);
 }
 
+static void io_req_complete_fail_submit(struct io_kiocb *req)
+{
+	/*
+	 * We don't submit, fail them all, for that replace hardlinks with
+	 * normal links. Extra REQ_F_LINK is tolerated.
+	 */
+	req->flags &= ~REQ_F_HARDLINK;
+	req->flags |= REQ_F_LINK;
+	io_req_complete_failed(req, req->result);
+}
+
 /*
  * Don't initialise the fields below on every allocation, but do that in
  * advance and keep them valid across allocations.
@@ -2119,6 +2136,9 @@ static void tctx_task_work(struct callback_head *cb)
 	while (1) {
 		struct io_wq_work_node *node;
 
+		if (!tctx->task_list.first && locked && ctx->submit_state.compl_nr)
+			io_submit_flush_completions(ctx);
+
 		spin_lock_irq(&tctx->task_lock);
 		node = tctx->task_list.first;
 		INIT_WQ_LIST(&tctx->task_list);
@@ -2673,7 +2693,7 @@ static void __io_complete_rw(struct io_kiocb *req, long res, long res2,
 {
 	if (__io_complete_rw_common(req, res))
 		return;
-	__io_req_complete(req, 0, req->result, io_put_rw_kbuf(req));
+	__io_req_complete(req, issue_flags, req->result, io_put_rw_kbuf(req));
 }
 
 static void io_complete_rw(struct kiocb *kiocb, long res, long res2)
@@ -3410,6 +3430,12 @@ static inline int io_iter_do_read(struct io_kiocb *req, struct iov_iter *iter)
 		return -EINVAL;
 }
 
+static bool need_read_all(struct io_kiocb *req)
+{
+	return req->flags & REQ_F_ISREG ||
+		S_ISBLK(file_inode(req->file)->i_mode);
+}
+
 static int io_read(struct io_kiocb *req, unsigned int issue_flags)
 {
 	struct iovec inline_vecs[UIO_FASTIOV], *iovec = inline_vecs;
@@ -3459,12 +3485,13 @@ static int io_read(struct io_kiocb *req, unsigned int issue_flags)
 		if (req->flags & REQ_F_NOWAIT)
 			goto done;
 		/* some cases will consume bytes even on error returns */
+		iov_iter_reexpand(iter, iter->count + iter->truncated);
 		iov_iter_revert(iter, io_size - iov_iter_count(iter));
 		ret = 0;
 	} else if (ret == -EIOCBQUEUED) {
 		goto out_free;
 	} else if (ret <= 0 || ret == io_size || !force_nonblock ||
-		   (req->flags & REQ_F_NOWAIT) || !(req->flags & REQ_F_ISREG)) {
+		   (req->flags & REQ_F_NOWAIT) || !need_read_all(req)) {
 		/* read all, failed, already did sync or don't want to retry */
 		goto done;
 	}
@@ -3598,6 +3625,7 @@ done:
 	} else {
 copy_iov:
 		/* some cases will consume bytes even on error returns */
+		iov_iter_reexpand(iter, iter->count + iter->truncated);
 		iov_iter_revert(iter, io_size - iov_iter_count(iter));
 		ret = io_setup_async_rw(req, iovec, inline_vecs, iter, false);
 		return ret ?: -EAGAIN;
@@ -5249,7 +5277,7 @@ static void io_poll_remove_double(struct io_kiocb *req)
 	}
 }
 
-static bool io_poll_complete(struct io_kiocb *req, __poll_t mask)
+static bool __io_poll_complete(struct io_kiocb *req, __poll_t mask)
 	__must_hold(&req->ctx->completion_lock)
 {
 	struct io_ring_ctx *ctx = req->ctx;
@@ -5271,10 +5299,19 @@ static bool io_poll_complete(struct io_kiocb *req, __poll_t mask)
 	if (flags & IORING_CQE_F_MORE)
 		ctx->cq_extra++;
 
-	io_commit_cqring(ctx);
 	return !(flags & IORING_CQE_F_MORE);
 }
 
+static inline bool io_poll_complete(struct io_kiocb *req, __poll_t mask)
+	__must_hold(&req->ctx->completion_lock)
+{
+	bool done;
+
+	done = __io_poll_complete(req, mask);
+	io_commit_cqring(req->ctx);
+	return done;
+}
+
 static void io_poll_task_func(struct io_kiocb *req, bool *locked)
 {
 	struct io_ring_ctx *ctx = req->ctx;
@@ -5285,7 +5322,7 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked)
 	} else {
 		bool done;
 
-		done = io_poll_complete(req, req->result);
+		done = __io_poll_complete(req, req->result);
 		if (done) {
 			io_poll_remove_double(req);
 			hash_del(&req->hash_node);
@@ -5293,6 +5330,7 @@ static void io_poll_task_func(struct io_kiocb *req, bool *locked)
 			req->result = 0;
 			add_wait_queue(req->poll.head, &req->poll.wait);
 		}
+		io_commit_cqring(ctx);
 		spin_unlock(&ctx->completion_lock);
 		io_cqring_ev_posted(ctx);
 
@@ -6398,6 +6436,11 @@ static bool io_drain_req(struct io_kiocb *req)
 	int ret;
 	u32 seq;
 
+	if (req->flags & REQ_F_FAIL) {
+		io_req_complete_fail_submit(req);
+		return true;
+	}
+
 	/*
 	 * If we need to drain a request in the middle of a link, drain the
 	 * head request and the next request/link after the current link.
@@ -6914,7 +6957,7 @@ static inline void io_queue_sqe(struct io_kiocb *req)
 	if (likely(!(req->flags & (REQ_F_FORCE_ASYNC | REQ_F_FAIL)))) {
 		__io_queue_sqe(req);
 	} else if (req->flags & REQ_F_FAIL) {
-		io_req_complete_failed(req, req->result);
+		io_req_complete_fail_submit(req);
 	} else {
 		int ret = io_req_prep_async(req);
 
@@ -10498,26 +10541,53 @@ static int io_unregister_iowq_aff(struct io_ring_ctx *ctx)
 static int io_register_iowq_max_workers(struct io_ring_ctx *ctx,
 					void __user *arg)
 {
-	struct io_uring_task *tctx = current->io_uring;
+	struct io_uring_task *tctx = NULL;
+	struct io_sq_data *sqd = NULL;
 	__u32 new_count[2];
 	int i, ret;
 
-	if (!tctx || !tctx->io_wq)
-		return -EINVAL;
 	if (copy_from_user(new_count, arg, sizeof(new_count)))
 		return -EFAULT;
 	for (i = 0; i < ARRAY_SIZE(new_count); i++)
 		if (new_count[i] > INT_MAX)
 			return -EINVAL;
 
+	if (ctx->flags & IORING_SETUP_SQPOLL) {
+		sqd = ctx->sq_data;
+		if (sqd) {
+			/*
+			 * Observe the correct sqd->lock -> ctx->uring_lock
+			 * ordering. Fine to drop uring_lock here, we hold
+			 * a ref to the ctx.
+			 */
+			mutex_unlock(&ctx->uring_lock);
+			mutex_lock(&sqd->lock);
+			mutex_lock(&ctx->uring_lock);
+			tctx = sqd->thread->io_uring;
+		}
+	} else {
+		tctx = current->io_uring;
+	}
+
+	ret = -EINVAL;
+	if (!tctx || !tctx->io_wq)
+		goto err;
+
 	ret = io_wq_max_workers(tctx->io_wq, new_count);
 	if (ret)
-		return ret;
+		goto err;
+
+	if (sqd)
+		mutex_unlock(&sqd->lock);
 
 	if (copy_to_user(arg, new_count, sizeof(new_count)))
 		return -EFAULT;
 
 	return 0;
+err:
+	if (sqd)
+		mutex_unlock(&sqd->lock);
+	return ret;
 }
 
 static bool io_register_op_must_quiesce(int op)
@@ -10795,7 +10865,7 @@ static int __init io_uring_init(void)
 	BUILD_BUG_ON(SQE_VALID_FLAGS >= (1 << 8));
 
 	BUILD_BUG_ON(ARRAY_SIZE(io_op_defs) != IORING_OP_LAST);
-	BUILD_BUG_ON(__REQ_F_LAST_BIT >= 8 * sizeof(int));
+	BUILD_BUG_ON(__REQ_F_LAST_BIT > 8 * sizeof(int));
 
 	req_cachep = KMEM_CACHE(io_kiocb, SLAB_HWCACHE_ALIGN | SLAB_PANIC |
 				SLAB_ACCOUNT);
diff --git a/fs/ksmbd/ndr.c b/fs/ksmbd/ndr.c
index 2243a2c64b37..8317f7ca402b 100644
--- a/fs/ksmbd/ndr.c
+++ b/fs/ksmbd/ndr.c
@@ -28,37 +28,60 @@ static int try_to_realloc_ndr_blob(struct ndr *n, size_t sz)
 	return 0;
 }
 
-static void ndr_write_int16(struct ndr *n, __u16 value)
+static int ndr_write_int16(struct ndr *n, __u16 value)
 {
-	if (n->length <= n->offset + sizeof(value))
-		try_to_realloc_ndr_blob(n, sizeof(value));
+	if (n->length <= n->offset + sizeof(value)) {
+		int ret;
+
+		ret = try_to_realloc_ndr_blob(n, sizeof(value));
+		if (ret)
+			return ret;
+	}
 
 	*(__le16 *)ndr_get_field(n) = cpu_to_le16(value);
 	n->offset += sizeof(value);
+	return 0;
 }
 
-static void ndr_write_int32(struct ndr *n, __u32 value)
+static int ndr_write_int32(struct ndr *n, __u32 value)
 {
-	if (n->length <= n->offset + sizeof(value))
-		try_to_realloc_ndr_blob(n, sizeof(value));
+	if (n->length <= n->offset + sizeof(value)) {
+		int ret;
+
+		ret = try_to_realloc_ndr_blob(n, sizeof(value));
+		if (ret)
+			return ret;
+	}
 
 	*(__le32 *)ndr_get_field(n) = cpu_to_le32(value);
 	n->offset += sizeof(value);
+	return 0;
 }
 
-static void ndr_write_int64(struct ndr *n, __u64 value)
+static int ndr_write_int64(struct ndr *n, __u64 value)
 {
-	if (n->length <= n->offset + sizeof(value))
-		try_to_realloc_ndr_blob(n, sizeof(value));
+	if (n->length <= n->offset + sizeof(value)) {
+		int ret;
+
+		ret = try_to_realloc_ndr_blob(n, sizeof(value));
+		if (ret)
+			return ret;
+	}
 
 	*(__le64 *)ndr_get_field(n) = cpu_to_le64(value);
 	n->offset += sizeof(value);
+	return 0;
 }
 
 static int ndr_write_bytes(struct ndr *n, void *value, size_t sz)
 {
-	if (n->length <= n->offset + sz)
-		try_to_realloc_ndr_blob(n, sz);
+	if (n->length <= n->offset + sz) {
+		int ret;
+
+		ret = try_to_realloc_ndr_blob(n, sz);
+		if (ret)
+			return ret;
+	}
 
 	memcpy(ndr_get_field(n), value, sz);
 	n->offset += sz;
@@ -70,8 +93,13 @@ static int ndr_write_string(struct ndr *n, char *value)
 	size_t sz;
 
 	sz = strlen(value) + 1;
-	if (n->length <= n->offset + sz)
-		try_to_realloc_ndr_blob(n, sz);
+	if (n->length <= n->offset + sz) {
+		int ret;
+
+		ret = try_to_realloc_ndr_blob(n, sz);
+		if (ret)
+			return ret;
+	}
 
 	memcpy(ndr_get_field(n), value, sz);
 	n->offset += sz;
@@ -81,9 +109,14 @@ static int ndr_write_string(struct ndr *n, char *value)
 
 static int ndr_read_string(struct ndr *n, void *value, size_t sz)
 {
-	int len = strnlen(ndr_get_field(n), sz);
+	int len;
 
-	memcpy(value, ndr_get_field(n), len);
+	if (n->offset + sz > n->length)
+		return -EINVAL;
+
+	len = strnlen(ndr_get_field(n), sz);
+	if (value)
+		memcpy(value, ndr_get_field(n), len);
 	len++;
 	n->offset += len;
 	n->offset = ALIGN(n->offset, 2);
@@ -92,41 +125,52 @@ static int ndr_read_string(struct ndr *n, void *value, size_t sz)
 
 static int ndr_read_bytes(struct ndr *n, void *value, size_t sz)
 {
-	memcpy(value, ndr_get_field(n), sz);
+	if (n->offset + sz > n->length)
+		return -EINVAL;
+
+	if (value)
+		memcpy(value, ndr_get_field(n), sz);
 	n->offset += sz;
 	return 0;
 }
 
-static __u16 ndr_read_int16(struct ndr *n)
+static int ndr_read_int16(struct ndr *n, __u16 *value)
 {
-	__u16 ret;
+	if (n->offset + sizeof(__u16) > n->length)
+		return -EINVAL;
 
-	ret = le16_to_cpu(*(__le16 *)ndr_get_field(n));
+	if (value)
+		*value = le16_to_cpu(*(__le16 *)ndr_get_field(n));
 	n->offset += sizeof(__u16);
-	return ret;
+	return 0;
 }
 
-static __u32 ndr_read_int32(struct ndr *n)
+static int ndr_read_int32(struct ndr *n, __u32 *value)
 {
-	__u32 ret;
+	if (n->offset + sizeof(__u32) > n->length)
+		return 0;
 
-	ret = le32_to_cpu(*(__le32 *)ndr_get_field(n));
+	if (value)
+		*value = le32_to_cpu(*(__le32 *)ndr_get_field(n));
 	n->offset += sizeof(__u32);
-	return ret;
+	return 0;
 }
 
-static __u64 ndr_read_int64(struct ndr *n)
+static int ndr_read_int64(struct ndr *n, __u64 *value)
 {
-	__u64 ret;
+	if (n->offset + sizeof(__u64) > n->length)
+		return -EINVAL;
 
-	ret = le64_to_cpu(*(__le64 *)ndr_get_field(n));
+	if (value)
+		*value = le64_to_cpu(*(__le64 *)ndr_get_field(n));
 	n->offset += sizeof(__u64);
-	return ret;
+	return 0;
 }
 
 int ndr_encode_dos_attr(struct ndr *n, struct xattr_dos_attrib *da)
 {
 	char hex_attr[12] = {0};
+	int ret;
 
 	n->offset = 0;
 	n->length = 1024;
@@ -136,97 +180,161 @@ int ndr_encode_dos_attr(struct ndr *n, struct xattr_dos_attrib *da)
 
 	if (da->version == 3) {
 		snprintf(hex_attr, 10, "0x%x", da->attr);
-		ndr_write_string(n, hex_attr);
+		ret = ndr_write_string(n, hex_attr);
 	} else {
-		ndr_write_string(n, "");
+		ret = ndr_write_string(n, "");
 	}
-	ndr_write_int16(n, da->version);
-	ndr_write_int32(n, da->version);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int16(n, da->version);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, da->version);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, da->flags);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, da->attr);
+	if (ret)
+		return ret;
 
-	ndr_write_int32(n, da->flags);
-	ndr_write_int32(n, da->attr);
 	if (da->version == 3) {
-		ndr_write_int32(n, da->ea_size);
-		ndr_write_int64(n, da->size);
-		ndr_write_int64(n, da->alloc_size);
+		ret = ndr_write_int32(n, da->ea_size);
+		if (ret)
+			return ret;
+		ret = ndr_write_int64(n, da->size);
+		if (ret)
+			return ret;
+		ret = ndr_write_int64(n, da->alloc_size);
 	} else {
-		ndr_write_int64(n, da->itime);
+		ret = ndr_write_int64(n, da->itime);
 	}
-	ndr_write_int64(n, da->create_time);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int64(n, da->create_time);
+	if (ret)
+		return ret;
+
 	if (da->version == 3)
-		ndr_write_int64(n, da->change_time);
-	return 0;
+		ret = ndr_write_int64(n, da->change_time);
+	return ret;
 }
 
 int ndr_decode_dos_attr(struct ndr *n, struct xattr_dos_attrib *da)
 {
-	char *hex_attr;
-	int version2;
-
-	hex_attr = kzalloc(n->length, GFP_KERNEL);
-	if (!hex_attr)
-		return -ENOMEM;
+	char hex_attr[12];
+	unsigned int version2;
+	int ret;
 
 	n->offset = 0;
-	ndr_read_string(n, hex_attr, n->length);
-	kfree(hex_attr);
-	da->version = ndr_read_int16(n);
+	ret = ndr_read_string(n, hex_attr, sizeof(hex_attr));
+	if (ret)
+		return ret;
+
+	ret = ndr_read_int16(n, &da->version);
+	if (ret)
+		return ret;
 
 	if (da->version != 3 && da->version != 4) {
 		pr_err("v%d version is not supported\n", da->version);
 		return -EINVAL;
 	}
 
-	version2 = ndr_read_int32(n);
+	ret = ndr_read_int32(n, &version2);
+	if (ret)
+		return ret;
+
 	if (da->version != version2) {
 		pr_err("ndr version mismatched(version: %d, version2: %d)\n",
 		       da->version, version2);
 		return -EINVAL;
 	}
 
-	ndr_read_int32(n);
-	da->attr = ndr_read_int32(n);
+	ret = ndr_read_int32(n, NULL);
+	if (ret)
+		return ret;
+
+	ret = ndr_read_int32(n, &da->attr);
+	if (ret)
+		return ret;
+
 	if (da->version == 4) {
-		da->itime = ndr_read_int64(n);
-		da->create_time = ndr_read_int64(n);
+		ret = ndr_read_int64(n, &da->itime);
+		if (ret)
+			return ret;
+
+		ret = ndr_read_int64(n, &da->create_time);
 	} else {
-		ndr_read_int32(n);
-		ndr_read_int64(n);
-		ndr_read_int64(n);
-		da->create_time = ndr_read_int64(n);
-		ndr_read_int64(n);
+		ret = ndr_read_int32(n, NULL);
+		if (ret)
+			return ret;
+
+		ret = ndr_read_int64(n, NULL);
+		if (ret)
+			return ret;
+
+		ret = ndr_read_int64(n, NULL);
+		if (ret)
+			return ret;
+
+		ret = ndr_read_int64(n, &da->create_time);
+		if (ret)
+			return ret;
+
+		ret = ndr_read_int64(n, NULL);
 	}
 
-	return 0;
+	return ret;
 }
 
 static int ndr_encode_posix_acl_entry(struct ndr *n, struct xattr_smb_acl *acl)
 {
-	int i;
+	int i, ret;
+
+	ret = ndr_write_int32(n, acl->count);
+	if (ret)
+		return ret;
 
-	ndr_write_int32(n, acl->count);
 	n->offset = ALIGN(n->offset, 8);
-	ndr_write_int32(n, acl->count);
-	ndr_write_int32(n, 0);
+	ret = ndr_write_int32(n, acl->count);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, 0);
+	if (ret)
+		return ret;
 
 	for (i = 0; i < acl->count; i++) {
 		n->offset = ALIGN(n->offset, 8);
-		ndr_write_int16(n, acl->entries[i].type);
-		ndr_write_int16(n, acl->entries[i].type);
+		ret = ndr_write_int16(n, acl->entries[i].type);
+		if (ret)
+			return ret;
+
+		ret = ndr_write_int16(n, acl->entries[i].type);
+		if (ret)
+			return ret;
 
 		if (acl->entries[i].type == SMB_ACL_USER) {
 			n->offset = ALIGN(n->offset, 8);
-			ndr_write_int64(n, acl->entries[i].uid);
+			ret = ndr_write_int64(n, acl->entries[i].uid);
 		} else if (acl->entries[i].type == SMB_ACL_GROUP) {
 			n->offset = ALIGN(n->offset, 8);
-			ndr_write_int64(n, acl->entries[i].gid);
+			ret = ndr_write_int64(n, acl->entries[i].gid);
 		}
+		if (ret)
+			return ret;
 
 		/* push permission */
-		ndr_write_int32(n, acl->entries[i].perm);
+		ret = ndr_write_int32(n, acl->entries[i].perm);
 	}
 
-	return 0;
+	return ret;
 }
 
 int ndr_encode_posix_acl(struct ndr *n,
@@ -235,7 +343,8 @@ int ndr_encode_posix_acl(struct ndr *n,
 			 struct xattr_smb_acl *acl,
 			 struct xattr_smb_acl *def_acl)
 {
-	int ref_id = 0x00020000;
+	unsigned int ref_id = 0x00020000;
+	int ret;
 
 	n->offset = 0;
 	n->length = 1024;
@@ -245,35 +354,46 @@ int ndr_encode_posix_acl(struct ndr *n,
 
 	if (acl) {
 		/* ACL ACCESS */
-		ndr_write_int32(n, ref_id);
+		ret = ndr_write_int32(n, ref_id);
 		ref_id += 4;
 	} else {
-		ndr_write_int32(n, 0);
+		ret = ndr_write_int32(n, 0);
 	}
+	if (ret)
+		return ret;
 
 	if (def_acl) {
 		/* DEFAULT ACL ACCESS */
-		ndr_write_int32(n, ref_id);
+		ret = ndr_write_int32(n, ref_id);
 		ref_id += 4;
 	} else {
-		ndr_write_int32(n, 0);
+		ret = ndr_write_int32(n, 0);
 	}
-
-	ndr_write_int64(n, from_kuid(user_ns, inode->i_uid));
-	ndr_write_int64(n, from_kgid(user_ns, inode->i_gid));
-	ndr_write_int32(n, inode->i_mode);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int64(n, from_kuid(&init_user_ns, i_uid_into_mnt(user_ns, inode)));
+	if (ret)
+		return ret;
+	ret = ndr_write_int64(n, from_kgid(&init_user_ns, i_gid_into_mnt(user_ns, inode)));
+	if (ret)
+		return ret;
+	ret = ndr_write_int32(n, inode->i_mode);
+	if (ret)
+		return ret;
 
 	if (acl) {
-		ndr_encode_posix_acl_entry(n, acl);
-		if (def_acl)
-			ndr_encode_posix_acl_entry(n, def_acl);
+		ret = ndr_encode_posix_acl_entry(n, acl);
+		if (def_acl && !ret)
+			ret = ndr_encode_posix_acl_entry(n, def_acl);
 	}
-	return 0;
+	return ret;
 }
 
 int ndr_encode_v4_ntacl(struct ndr *n, struct xattr_ntacl *acl)
 {
-	int ref_id = 0x00020004;
+	unsigned int ref_id = 0x00020004;
+	int ret;
 
 	n->offset = 0;
 	n->length = 2048;
@@ -281,36 +401,65 @@ int ndr_encode_v4_ntacl(struct ndr *n, struct xattr_ntacl *acl)
 	if (!n->data)
 		return -ENOMEM;
 
-	ndr_write_int16(n, acl->version);
-	ndr_write_int32(n, acl->version);
-	ndr_write_int16(n, 2);
-	ndr_write_int32(n, ref_id);
+	ret = ndr_write_int16(n, acl->version);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, acl->version);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int16(n, 2);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int32(n, ref_id);
+	if (ret)
+		return ret;
 
 	/* push hash type and hash 64bytes */
-	ndr_write_int16(n, acl->hash_type);
-	ndr_write_bytes(n, acl->hash, XATTR_SD_HASH_SIZE);
-	ndr_write_bytes(n, acl->desc, acl->desc_len);
-	ndr_write_int64(n, acl->current_time);
-	ndr_write_bytes(n, acl->posix_acl_hash, XATTR_SD_HASH_SIZE);
+	ret = ndr_write_int16(n, acl->hash_type);
+	if (ret)
+		return ret;
 
-	/* push ndr for security descriptor */
-	ndr_write_bytes(n, acl->sd_buf, acl->sd_size);
+	ret = ndr_write_bytes(n, acl->hash, XATTR_SD_HASH_SIZE);
+	if (ret)
+		return ret;
 
-	return 0;
+	ret = ndr_write_bytes(n, acl->desc, acl->desc_len);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_int64(n, acl->current_time);
+	if (ret)
+		return ret;
+
+	ret = ndr_write_bytes(n, acl->posix_acl_hash, XATTR_SD_HASH_SIZE);
+	if (ret)
+		return ret;
+
+	/* push ndr for security descriptor */
+	ret = ndr_write_bytes(n, acl->sd_buf, acl->sd_size);
+	return ret;
 }
 
 int ndr_decode_v4_ntacl(struct ndr *n, struct xattr_ntacl *acl)
 {
-	int version2;
+	unsigned int version2;
+	int ret;
 
 	n->offset = 0;
-	acl->version = ndr_read_int16(n);
+	ret = ndr_read_int16(n, &acl->version);
+	if (ret)
+		return ret;
 	if (acl->version != 4) {
 		pr_err("v%d version is not supported\n", acl->version);
 		return -EINVAL;
 	}
 
-	version2 = ndr_read_int32(n);
+	ret = ndr_read_int32(n, &version2);
+	if (ret)
+		return ret;
 	if (acl->version != version2) {
 		pr_err("ndr version mismatched(version: %d, version2: %d)\n",
 		       acl->version, version2);
@@ -318,11 +467,22 @@ int ndr_decode_v4_ntacl(struct ndr *n, struct xattr_ntacl *acl)
 	}
 
 	/* Read Level */
-	ndr_read_int16(n);
+	ret = ndr_read_int16(n, NULL);
+	if (ret)
+		return ret;
+
 	/* Read Ref Id */
-	ndr_read_int32(n);
-	acl->hash_type = ndr_read_int16(n);
-	ndr_read_bytes(n, acl->hash, XATTR_SD_HASH_SIZE);
+	ret = ndr_read_int32(n, NULL);
+	if (ret)
+		return ret;
+
+	ret = ndr_read_int16(n, &acl->hash_type);
+	if (ret)
+		return ret;
+
+	ret = ndr_read_bytes(n, acl->hash, XATTR_SD_HASH_SIZE);
+	if (ret)
+		return ret;
 
 	ndr_read_bytes(n, acl->desc, 10);
 	if (strncmp(acl->desc, "posix_acl", 9)) {
@@ -331,15 +491,20 @@ int ndr_decode_v4_ntacl(struct ndr *n, struct xattr_ntacl *acl)
 	}
 
 	/* Read Time */
-	ndr_read_int64(n);
+	ret = ndr_read_int64(n, NULL);
+	if (ret)
+		return ret;
+
 	/* Read Posix ACL hash */
-	ndr_read_bytes(n, acl->posix_acl_hash, XATTR_SD_HASH_SIZE);
+	ret = ndr_read_bytes(n, acl->posix_acl_hash, XATTR_SD_HASH_SIZE);
+	if (ret)
+		return ret;
+
 	acl->sd_size = n->length - n->offset;
 	acl->sd_buf = kzalloc(acl->sd_size, GFP_KERNEL);
 	if (!acl->sd_buf)
 		return -ENOMEM;
 
-	ndr_read_bytes(n, acl->sd_buf, acl->sd_size);
-
-	return 0;
+	ret = ndr_read_bytes(n, acl->sd_buf, acl->sd_size);
+	return ret;
 }
diff --git a/fs/ksmbd/oplock.c b/fs/ksmbd/oplock.c
index 6ace6c2f22dc..16b6236d1bd2 100644
--- a/fs/ksmbd/oplock.c
+++ b/fs/ksmbd/oplock.c
@@ -1614,9 +1614,11 @@ void create_posix_rsp_buf(char *cc, struct ksmbd_file *fp)
 	buf->nlink = cpu_to_le32(inode->i_nlink);
 	buf->reparse_tag = cpu_to_le32(fp->volatile_id);
 	buf->mode = cpu_to_le32(inode->i_mode);
-	id_to_sid(from_kuid(user_ns, inode->i_uid),
+	id_to_sid(from_kuid_munged(&init_user_ns,
+				   i_uid_into_mnt(user_ns, inode)),
 		  SIDNFS_USER, (struct smb_sid *)&buf->SidBuffer[0]);
-	id_to_sid(from_kgid(user_ns, inode->i_gid),
+	id_to_sid(from_kgid_munged(&init_user_ns,
+				   i_gid_into_mnt(user_ns, inode)),
 		  SIDNFS_GROUP, (struct smb_sid *)&buf->SidBuffer[20]);
 }
 
diff --git a/fs/ksmbd/smb2pdu.c b/fs/ksmbd/smb2pdu.c
index d329ea49fa14..c86164dc70bb 100644
--- a/fs/ksmbd/smb2pdu.c
+++ b/fs/ksmbd/smb2pdu.c
@@ -2381,10 +2381,12 @@ static int smb2_create_sd_buffer(struct ksmbd_work *work,
 			    le32_to_cpu(sd_buf->ccontext.DataLength), true);
 }
 
-static void ksmbd_acls_fattr(struct smb_fattr *fattr, struct inode *inode)
+static void ksmbd_acls_fattr(struct smb_fattr *fattr,
+			     struct user_namespace *mnt_userns,
+			     struct inode *inode)
 {
-	fattr->cf_uid = inode->i_uid;
-	fattr->cf_gid = inode->i_gid;
+	fattr->cf_uid = i_uid_into_mnt(mnt_userns, inode);
+	fattr->cf_gid = i_gid_into_mnt(mnt_userns, inode);
 	fattr->cf_mode = inode->i_mode;
 	fattr->cf_acls = NULL;
 	fattr->cf_dacls = NULL;
@@ -2893,7 +2895,7 @@ int smb2_open(struct ksmbd_work *work)
 					struct smb_ntsd *pntsd;
 					int pntsd_size, ace_num = 0;
 
-					ksmbd_acls_fattr(&fattr, inode);
+					ksmbd_acls_fattr(&fattr, user_ns, inode);
 					if (fattr.cf_acls)
 						ace_num = fattr.cf_acls->a_count;
 					if (fattr.cf_dacls)
@@ -3324,7 +3326,6 @@ static int dentry_name(struct ksmbd_dir_info *d_info, int info_level)
  */
 static int smb2_populate_readdir_entry(struct ksmbd_conn *conn, int info_level,
 				       struct ksmbd_dir_info *d_info,
-				       struct user_namespace *user_ns,
 				       struct ksmbd_kstat *ksmbd_kstat)
 {
 	int next_entry_offset = 0;
@@ -3478,9 +3479,9 @@ static int smb2_populate_readdir_entry(struct ksmbd_conn *conn, int info_level,
 			S_ISDIR(ksmbd_kstat->kstat->mode) ? ATTR_DIRECTORY_LE : ATTR_ARCHIVE_LE;
 		if (d_info->hide_dot_file && d_info->name[0] == '.')
 			posix_info->DosAttributes |= ATTR_HIDDEN_LE;
-		id_to_sid(from_kuid(user_ns, ksmbd_kstat->kstat->uid),
+		id_to_sid(from_kuid_munged(&init_user_ns, ksmbd_kstat->kstat->uid),
 			  SIDNFS_USER, (struct smb_sid *)&posix_info->SidBuffer[0]);
-		id_to_sid(from_kgid(user_ns, ksmbd_kstat->kstat->gid),
+		id_to_sid(from_kgid_munged(&init_user_ns, ksmbd_kstat->kstat->gid),
 			  SIDNFS_GROUP, (struct smb_sid *)&posix_info->SidBuffer[20]);
 		memcpy(posix_info->name, conv_name, conv_len);
 		posix_info->name_len = cpu_to_le32(conv_len);
@@ -3543,9 +3544,9 @@ static int process_query_dir_entries(struct smb2_query_dir_private *priv)
 			return -EINVAL;
 
 		lock_dir(priv->dir_fp);
-		dent = lookup_one_len(priv->d_info->name,
-				      priv->dir_fp->filp->f_path.dentry,
-				      priv->d_info->name_len);
+		dent = lookup_one(user_ns, priv->d_info->name,
+				  priv->dir_fp->filp->f_path.dentry,
+				  priv->d_info->name_len);
 		unlock_dir(priv->dir_fp);
 
 		if (IS_ERR(dent)) {
@@ -3571,7 +3572,6 @@ static int process_query_dir_entries(struct smb2_query_dir_private *priv)
 		rc = smb2_populate_readdir_entry(priv->work->conn,
 						 priv->info_level,
 						 priv->d_info,
-						 user_ns,
 						 &ksmbd_kstat);
 		dput(dent);
 		if (rc)
@@ -5008,7 +5008,7 @@ static int smb2_get_info_sec(struct ksmbd_work *work,
 
 	user_ns = file_mnt_user_ns(fp->filp);
 	inode = file_inode(fp->filp);
-	ksmbd_acls_fattr(&fattr, inode);
+	ksmbd_acls_fattr(&fattr, user_ns, inode);
 
 	if (test_share_config_flag(work->tcon->share_conf,
 				   KSMBD_SHARE_FLAG_ACL_XATTR))
@@ -5246,7 +5246,9 @@ int smb2_echo(struct ksmbd_work *work)
 	return 0;
 }
 
-static int smb2_rename(struct ksmbd_work *work, struct ksmbd_file *fp,
+static int smb2_rename(struct ksmbd_work *work,
+		       struct ksmbd_file *fp,
+		       struct user_namespace *user_ns,
 		       struct smb2_file_rename_info *file_info,
 		       struct nls_table *local_nls)
 {
@@ -5310,7 +5312,7 @@ static int smb2_rename(struct ksmbd_work *work, struct ksmbd_file *fp,
 		if (rc)
 			goto out;
 
-		rc = ksmbd_vfs_setxattr(file_mnt_user_ns(fp->filp),
+		rc = ksmbd_vfs_setxattr(user_ns,
 					fp->filp->f_path.dentry,
 					xattr_stream_name,
 					NULL, 0, 0);
@@ -5438,11 +5440,11 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf,
 {
 	struct smb2_file_all_info *file_info;
 	struct iattr attrs;
-	struct iattr temp_attrs;
+	struct timespec64 ctime;
 	struct file *filp;
 	struct inode *inode;
 	struct user_namespace *user_ns;
-	int rc;
+	int rc = 0;
 
 	if (!(fp->daccess & FILE_WRITE_ATTRIBUTES_LE))
 		return -EACCES;
@@ -5462,11 +5464,11 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf,
 	}
 
 	if (file_info->ChangeTime) {
-		temp_attrs.ia_ctime = ksmbd_NTtimeToUnix(file_info->ChangeTime);
-		attrs.ia_ctime = temp_attrs.ia_ctime;
+		attrs.ia_ctime = ksmbd_NTtimeToUnix(file_info->ChangeTime);
+		ctime = attrs.ia_ctime;
 		attrs.ia_valid |= ATTR_CTIME;
 	} else {
-		temp_attrs.ia_ctime = inode->i_ctime;
+		ctime = inode->i_ctime;
 	}
 
 	if (file_info->LastWriteTime) {
@@ -5505,13 +5507,6 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf,
 		rc = 0;
 	}
 
-	/*
-	 * HACK : set ctime here to avoid ctime changed
-	 * when file_info->ChangeTime is zero.
-	 */
-	attrs.ia_ctime = temp_attrs.ia_ctime;
-	attrs.ia_valid |= ATTR_CTIME;
-
 	if (attrs.ia_valid) {
 		struct dentry *dentry = filp->f_path.dentry;
 		struct inode *inode = d_inode(dentry);
@@ -5519,17 +5514,15 @@ static int set_file_basic_info(struct ksmbd_file *fp, char *buf,
 		if (IS_IMMUTABLE(inode) || IS_APPEND(inode))
 			return -EACCES;
 
-		rc = setattr_prepare(user_ns, dentry, &attrs);
-		if (rc)
-			return -EINVAL;
-
 		inode_lock(inode);
-		setattr_copy(user_ns, inode, &attrs);
-		attrs.ia_valid &= ~ATTR_CTIME;
 		rc = notify_change(user_ns, dentry, &attrs, NULL);
+		if (!rc) {
+			inode->i_ctime = ctime;
+			mark_inode_dirty(inode);
+		}
 		inode_unlock(inode);
 	}
-	return 0;
+	return rc;
 }
 
 static int set_file_allocation_info(struct ksmbd_work *work,
@@ -5624,6 +5617,7 @@ static int set_end_of_file_info(struct ksmbd_work *work, struct ksmbd_file *fp,
 static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp,
 			   char *buf)
 {
+	struct user_namespace *user_ns;
 	struct ksmbd_file *parent_fp;
 	struct dentry *parent;
 	struct dentry *dentry = fp->filp->f_path.dentry;
@@ -5634,11 +5628,12 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp,
 		return -EACCES;
 	}
 
+	user_ns = file_mnt_user_ns(fp->filp);
 	if (ksmbd_stream_fd(fp))
 		goto next;
 
 	parent = dget_parent(dentry);
-	ret = ksmbd_vfs_lock_parent(parent, dentry);
+	ret = ksmbd_vfs_lock_parent(user_ns, parent, dentry);
 	if (ret) {
 		dput(parent);
 		return ret;
@@ -5655,7 +5650,7 @@ static int set_rename_info(struct ksmbd_work *work, struct ksmbd_file *fp,
 		}
 	}
 next:
-	return smb2_rename(work, fp,
+	return smb2_rename(work, fp, user_ns,
 			   (struct smb2_file_rename_info *)buf,
 			   work->sess->conn->local_nls);
 }
@@ -7116,8 +7111,8 @@ static int fsctl_query_iface_info_ioctl(struct ksmbd_conn *conn,
 			netdev->ethtool_ops->get_link_ksettings(netdev, &cmd);
 			speed = cmd.base.speed;
 		} else {
-			pr_err("%s %s\n", netdev->name,
-			       "speed is unknown, defaulting to 1Gb/sec");
+			ksmbd_debug(SMB, "%s %s\n", netdev->name,
+				    "speed is unknown, defaulting to 1Gb/sec");
 			speed = SPEED_1000;
 		}
 
diff --git a/fs/ksmbd/smb_common.c b/fs/ksmbd/smb_common.c
index b108b918ec84..43d3123d8b62 100644
--- a/fs/ksmbd/smb_common.c
+++ b/fs/ksmbd/smb_common.c
@@ -291,7 +291,6 @@ int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level,
 				      char *search_pattern,
 				      int (*fn)(struct ksmbd_conn *, int,
 						struct ksmbd_dir_info *,
-						struct user_namespace *,
 						struct ksmbd_kstat *))
 {
 	int i, rc = 0;
@@ -322,8 +321,7 @@ int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work, int info_level,
 						    user_ns,
 						    dir->filp->f_path.dentry->d_parent,
 						    &ksmbd_kstat);
-			rc = fn(conn, info_level, d_info,
-				user_ns, &ksmbd_kstat);
+			rc = fn(conn, info_level, d_info, &ksmbd_kstat);
 			if (rc)
 				break;
 			if (d_info->out_buf_len <= 0)
diff --git a/fs/ksmbd/smb_common.h b/fs/ksmbd/smb_common.h
index eb667d85558e..57c667c1be06 100644
--- a/fs/ksmbd/smb_common.h
+++ b/fs/ksmbd/smb_common.h
@@ -511,7 +511,6 @@ int ksmbd_populate_dot_dotdot_entries(struct ksmbd_work *work,
 				      int (*fn)(struct ksmbd_conn *,
 						int,
 						struct ksmbd_dir_info *,
-						struct user_namespace *,
 						struct ksmbd_kstat *));
 
 int ksmbd_extract_shortname(struct ksmbd_conn *conn,
diff --git a/fs/ksmbd/smbacl.c b/fs/ksmbd/smbacl.c
index 5456e3ad943e..0a95cdec8c80 100644
--- a/fs/ksmbd/smbacl.c
+++ b/fs/ksmbd/smbacl.c
@@ -274,24 +274,34 @@ static int sid_to_id(struct user_namespace *user_ns,
 		uid_t id;
 
 		id = le32_to_cpu(psid->sub_auth[psid->num_subauth - 1]);
-		if (id > 0) {
-			uid = make_kuid(user_ns, id);
-			if (uid_valid(uid) && kuid_has_mapping(user_ns, uid)) {
-				fattr->cf_uid = uid;
-				rc = 0;
-			}
+		/*
+		 * Translate raw sid into kuid in the server's user
+		 * namespace.
+		 */
+		uid = make_kuid(&init_user_ns, id);
+
+		/* If this is an idmapped mount, apply the idmapping. */
+		uid = kuid_from_mnt(user_ns, uid);
+		if (uid_valid(uid)) {
+			fattr->cf_uid = uid;
+			rc = 0;
 		}
 	} else {
 		kgid_t gid;
 		gid_t id;
 
 		id = le32_to_cpu(psid->sub_auth[psid->num_subauth - 1]);
-		if (id > 0) {
-			gid = make_kgid(user_ns, id);
-			if (gid_valid(gid) && kgid_has_mapping(user_ns, gid)) {
-				fattr->cf_gid = gid;
-				rc = 0;
-			}
+		/*
+		 * Translate raw sid into kgid in the server's user
+		 * namespace.
+		 */
+		gid = make_kgid(&init_user_ns, id);
+
+		/* If this is an idmapped mount, apply the idmapping. */
+		gid = kgid_from_mnt(user_ns, gid);
+		if (gid_valid(gid)) {
+			fattr->cf_gid = gid;
+			rc = 0;
 		}
 	}
 
@@ -587,14 +597,14 @@ static void set_posix_acl_entries_dacl(struct user_namespace *user_ns,
 			uid_t uid;
 			unsigned int sid_type = SIDOWNER;
 
-			uid = from_kuid(user_ns, pace->e_uid);
+			uid = posix_acl_uid_translate(user_ns, pace);
 			if (!uid)
 				sid_type = SIDUNIX_USER;
 			id_to_sid(uid, sid_type, sid);
 		} else if (pace->e_tag == ACL_GROUP) {
 			gid_t gid;
 
-			gid = from_kgid(user_ns, pace->e_gid);
+			gid = posix_acl_gid_translate(user_ns, pace);
 			id_to_sid(gid, SIDUNIX_GROUP, sid);
 		} else if (pace->e_tag == ACL_OTHER && !nt_aces_num) {
 			smb_copy_sid(sid, &sid_everyone);
@@ -653,12 +663,12 @@ posix_default_acl:
 		if (pace->e_tag == ACL_USER) {
 			uid_t uid;
 
-			uid = from_kuid(user_ns, pace->e_uid);
+			uid = posix_acl_uid_translate(user_ns, pace);
 			id_to_sid(uid, SIDCREATOR_OWNER, sid);
 		} else if (pace->e_tag == ACL_GROUP) {
 			gid_t gid;
 
-			gid = from_kgid(user_ns, pace->e_gid);
+			gid = posix_acl_gid_translate(user_ns, pace);
 			id_to_sid(gid, SIDCREATOR_GROUP, sid);
 		} else {
 			kfree(sid);
@@ -723,7 +733,7 @@ static void set_mode_dacl(struct user_namespace *user_ns,
 	}
 
 	/* owner RID */
-	uid = from_kuid(user_ns, fattr->cf_uid);
+	uid = from_kuid(&init_user_ns, fattr->cf_uid);
 	if (uid)
 		sid = &server_conf.domain_sid;
 	else
@@ -739,7 +749,7 @@ static void set_mode_dacl(struct user_namespace *user_ns,
 	ace_size = fill_ace_for_sid(pace, &sid_unix_groups,
 				    ACCESS_ALLOWED, 0, fattr->cf_mode, 0070);
 	pace->sid.sub_auth[pace->sid.num_subauth++] =
-		cpu_to_le32(from_kgid(user_ns, fattr->cf_gid));
+		cpu_to_le32(from_kgid(&init_user_ns, fattr->cf_gid));
 	pace->size = cpu_to_le16(ace_size + 4);
 	size += le16_to_cpu(pace->size);
 	pace = (struct smb_ace *)((char *)pndace + size);
@@ -880,7 +890,7 @@ int build_sec_desc(struct user_namespace *user_ns,
 	if (!nowner_sid_ptr)
 		return -ENOMEM;
 
-	uid = from_kuid(user_ns, fattr->cf_uid);
+	uid = from_kuid(&init_user_ns, fattr->cf_uid);
 	if (!uid)
 		sid_type = SIDUNIX_USER;
 	id_to_sid(uid, sid_type, nowner_sid_ptr);
@@ -891,7 +901,7 @@ int build_sec_desc(struct user_namespace *user_ns,
 		return -ENOMEM;
 	}
 
-	gid = from_kgid(user_ns, fattr->cf_gid);
+	gid = from_kgid(&init_user_ns, fattr->cf_gid);
 	id_to_sid(gid, SIDUNIX_GROUP, ngroup_sid_ptr);
 
 	offset = sizeof(struct smb_ntsd);
@@ -1234,11 +1244,9 @@ int smb_check_perm_dacl(struct ksmbd_conn *conn, struct path *path,
 			pa_entry = posix_acls->a_entries;
 			for (i = 0; i < posix_acls->a_count; i++, pa_entry++) {
 				if (pa_entry->e_tag == ACL_USER)
-					id = from_kuid(user_ns,
-						       pa_entry->e_uid);
+					id = posix_acl_uid_translate(user_ns, pa_entry);
 				else if (pa_entry->e_tag == ACL_GROUP)
-					id = from_kgid(user_ns,
-						       pa_entry->e_gid);
+					id = posix_acl_gid_translate(user_ns, pa_entry);
 				else
 					continue;
 
@@ -1322,22 +1330,31 @@ int set_info_sec(struct ksmbd_conn *conn, struct ksmbd_tree_connect *tcon,
 	newattrs.ia_valid |= ATTR_MODE;
 	newattrs.ia_mode = (inode->i_mode & ~0777) | (fattr.cf_mode & 0777);
 
-	inode_lock(inode);
-	rc = notify_change(user_ns, path->dentry, &newattrs, NULL);
-	inode_unlock(inode);
-	if (rc)
-		goto out;
-
 	ksmbd_vfs_remove_acl_xattrs(user_ns, path->dentry);
 	/* Update posix acls */
 	if (IS_ENABLED(CONFIG_FS_POSIX_ACL) && fattr.cf_dacls) {
 		rc = set_posix_acl(user_ns, inode,
 				   ACL_TYPE_ACCESS, fattr.cf_acls);
-		if (S_ISDIR(inode->i_mode) && fattr.cf_dacls)
+		if (rc < 0)
+			ksmbd_debug(SMB,
+				    "Set posix acl(ACL_TYPE_ACCESS) failed, rc : %d\n",
+				    rc);
+		if (S_ISDIR(inode->i_mode) && fattr.cf_dacls) {
 			rc = set_posix_acl(user_ns, inode,
 					   ACL_TYPE_DEFAULT, fattr.cf_dacls);
+			if (rc)
+				ksmbd_debug(SMB,
+					    "Set posix acl(ACL_TYPE_DEFAULT) failed, rc : %d\n",
+					    rc);
+		}
 	}
 
+	inode_lock(inode);
+	rc = notify_change(user_ns, path->dentry, &newattrs, NULL);
+	inode_unlock(inode);
+	if (rc)
+		goto out;
+
 	/* Check it only calling from SD BUFFER context */
 	if (type_check && !(le16_to_cpu(pntsd->type) & DACL_PRESENT))
 		goto out;
diff --git a/fs/ksmbd/smbacl.h b/fs/ksmbd/smbacl.h
index 940f686a1d95..73e08cad412b 100644
--- a/fs/ksmbd/smbacl.h
+++ b/fs/ksmbd/smbacl.h
@@ -209,4 +209,29 @@ int set_info_sec(struct ksmbd_conn *conn, struct ksmbd_tree_connect *tcon,
 		 bool type_check);
 void id_to_sid(unsigned int cid, uint sidtype, struct smb_sid *ssid);
 void ksmbd_init_domain(u32 *sub_auth);
+
+static inline uid_t posix_acl_uid_translate(struct user_namespace *mnt_userns,
+					    struct posix_acl_entry *pace)
+{
+	kuid_t kuid;
+
+	/* If this is an idmapped mount, apply the idmapping. */
+	kuid = kuid_into_mnt(mnt_userns, pace->e_uid);
+
+	/* Translate the kuid into a userspace id ksmbd would see. */
+	return from_kuid(&init_user_ns, kuid);
+}
+
+static inline gid_t posix_acl_gid_translate(struct user_namespace *mnt_userns,
+					    struct posix_acl_entry *pace)
+{
+	kgid_t kgid;
+
+	/* If this is an idmapped mount, apply the idmapping. */
+	kgid = kgid_into_mnt(mnt_userns, pace->e_gid);
+
+	/* Translate the kgid into a userspace id ksmbd would see. */
+	return from_kgid(&init_user_ns, kgid);
+}
+
 #endif /* _SMBACL_H */
diff --git a/fs/ksmbd/transport_rdma.c b/fs/ksmbd/transport_rdma.c
index 58f530056ac0..52b2556e76b1 100644
--- a/fs/ksmbd/transport_rdma.c
+++ b/fs/ksmbd/transport_rdma.c
@@ -1168,7 +1168,7 @@ static int smb_direct_post_send_data(struct smb_direct_transport *t,
 			pr_err("failed to map buffer\n");
 			ret = -ENOMEM;
 			goto err;
-		} else if (sg_cnt + msg->num_sge > SMB_DIRECT_MAX_SEND_SGES - 1) {
+		} else if (sg_cnt + msg->num_sge > SMB_DIRECT_MAX_SEND_SGES) {
 			pr_err("buffer not fitted into sges\n");
 			ret = -E2BIG;
 			ib_dma_unmap_sg(t->cm_id->device, sg, sg_cnt,
diff --git a/fs/ksmbd/vfs.c b/fs/ksmbd/vfs.c
index aee28ee6b19c..b047f2980d96 100644
--- a/fs/ksmbd/vfs.c
+++ b/fs/ksmbd/vfs.c
@@ -69,14 +69,15 @@ static void ksmbd_vfs_inherit_owner(struct ksmbd_work *work,
  *
  * the reference count of @parent isn't incremented.
  */
-int ksmbd_vfs_lock_parent(struct dentry *parent, struct dentry *child)
+int ksmbd_vfs_lock_parent(struct user_namespace *user_ns, struct dentry *parent,
+			  struct dentry *child)
 {
 	struct dentry *dentry;
 	int ret = 0;
 
 	inode_lock_nested(d_inode(parent), I_MUTEX_PARENT);
-	dentry = lookup_one_len(child->d_name.name, parent,
-				child->d_name.len);
+	dentry = lookup_one(user_ns, child->d_name.name, parent,
+			    child->d_name.len);
 	if (IS_ERR(dentry)) {
 		ret = PTR_ERR(dentry);
 		goto out_err;
@@ -102,7 +103,7 @@ int ksmbd_vfs_may_delete(struct user_namespace *user_ns,
 	int ret;
 
 	parent = dget_parent(dentry);
-	ret = ksmbd_vfs_lock_parent(parent, dentry);
+	ret = ksmbd_vfs_lock_parent(user_ns, parent, dentry);
 	if (ret) {
 		dput(parent);
 		return ret;
@@ -137,7 +138,7 @@ int ksmbd_vfs_query_maximal_access(struct user_namespace *user_ns,
 		*daccess |= FILE_EXECUTE_LE;
 
 	parent = dget_parent(dentry);
-	ret = ksmbd_vfs_lock_parent(parent, dentry);
+	ret = ksmbd_vfs_lock_parent(user_ns, parent, dentry);
 	if (ret) {
 		dput(parent);
 		return ret;
@@ -197,6 +198,7 @@ int ksmbd_vfs_create(struct ksmbd_work *work, const char *name, umode_t mode)
  */
 int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode)
 {
+	struct user_namespace *user_ns;
 	struct path path;
 	struct dentry *dentry;
 	int err;
@@ -210,16 +212,16 @@ int ksmbd_vfs_mkdir(struct ksmbd_work *work, const char *name, umode_t mode)
 		return err;
 	}
 
+	user_ns = mnt_user_ns(path.mnt);
 	mode |= S_IFDIR;
-	err = vfs_mkdir(mnt_user_ns(path.mnt), d_inode(path.dentry),
-			dentry, mode);
+	err = vfs_mkdir(user_ns, d_inode(path.dentry), dentry, mode);
 	if (err) {
 		goto out;
 	} else if (d_unhashed(dentry)) {
 		struct dentry *d;
 
-		d = lookup_one_len(dentry->d_name.name, dentry->d_parent,
-				   dentry->d_name.len);
+		d = lookup_one(user_ns, dentry->d_name.name, dentry->d_parent,
+			       dentry->d_name.len);
 		if (IS_ERR(d)) {
 			err = PTR_ERR(d);
 			goto out;
@@ -582,6 +584,7 @@ int ksmbd_vfs_fsync(struct ksmbd_work *work, u64 fid, u64 p_id)
  */
 int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name)
 {
+	struct user_namespace *user_ns;
 	struct path path;
 	struct dentry *parent;
 	int err;
@@ -601,8 +604,9 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name)
 		return err;
 	}
 
+	user_ns = mnt_user_ns(path.mnt);
 	parent = dget_parent(path.dentry);
-	err = ksmbd_vfs_lock_parent(parent, path.dentry);
+	err = ksmbd_vfs_lock_parent(user_ns, parent, path.dentry);
 	if (err) {
 		dput(parent);
 		path_put(&path);
@@ -616,14 +620,12 @@ int ksmbd_vfs_remove_file(struct ksmbd_work *work, char *name)
 	}
 
 	if (S_ISDIR(d_inode(path.dentry)->i_mode)) {
-		err = vfs_rmdir(mnt_user_ns(path.mnt), d_inode(parent),
-				path.dentry);
+		err = vfs_rmdir(user_ns, d_inode(parent), path.dentry);
 		if (err && err != -ENOTEMPTY)
 			ksmbd_debug(VFS, "%s: rmdir failed, err %d\n", name,
 				    err);
 	} else {
-		err = vfs_unlink(mnt_user_ns(path.mnt), d_inode(parent),
-				 path.dentry, NULL);
+		err = vfs_unlink(user_ns, d_inode(parent), path.dentry, NULL);
 		if (err)
 			ksmbd_debug(VFS, "%s: unlink failed, err %d\n", name,
 				    err);
@@ -748,7 +750,8 @@ static int __ksmbd_vfs_rename(struct ksmbd_work *work,
 	if (ksmbd_override_fsids(work))
 		return -ENOMEM;
 
-	dst_dent = lookup_one_len(dst_name, dst_dent_parent, strlen(dst_name));
+	dst_dent = lookup_one(dst_user_ns, dst_name, dst_dent_parent,
+			      strlen(dst_name));
 	err = PTR_ERR(dst_dent);
 	if (IS_ERR(dst_dent)) {
 		pr_err("lookup failed %s [%d]\n", dst_name, err);
@@ -779,6 +782,7 @@ out:
 int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp,
 			char *newname)
 {
+	struct user_namespace *user_ns;
 	struct path dst_path;
 	struct dentry *src_dent_parent, *dst_dent_parent;
 	struct dentry *src_dent, *trap_dent, *src_child;
@@ -808,8 +812,9 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp,
 	trap_dent = lock_rename(src_dent_parent, dst_dent_parent);
 	dget(src_dent);
 	dget(dst_dent_parent);
-	src_child = lookup_one_len(src_dent->d_name.name, src_dent_parent,
-				   src_dent->d_name.len);
+	user_ns = file_mnt_user_ns(fp->filp);
+	src_child = lookup_one(user_ns, src_dent->d_name.name, src_dent_parent,
+			       src_dent->d_name.len);
 	if (IS_ERR(src_child)) {
 		err = PTR_ERR(src_child);
 		goto out_lock;
@@ -823,7 +828,7 @@ int ksmbd_vfs_fp_rename(struct ksmbd_work *work, struct ksmbd_file *fp,
 	dput(src_child);
 
 	err = __ksmbd_vfs_rename(work,
-				 file_mnt_user_ns(fp->filp),
+				 user_ns,
 				 src_dent_parent,
 				 src_dent,
 				 mnt_user_ns(dst_path.mnt),
@@ -1109,7 +1114,7 @@ int ksmbd_vfs_unlink(struct user_namespace *user_ns,
 {
 	int err = 0;
 
-	err = ksmbd_vfs_lock_parent(dir, dentry);
+	err = ksmbd_vfs_lock_parent(user_ns, dir, dentry);
 	if (err)
 		return err;
 	dget(dentry);
@@ -1385,14 +1390,14 @@ static struct xattr_smb_acl *ksmbd_vfs_make_xattr_posix_acl(struct user_namespac
 		switch (pa_entry->e_tag) {
 		case ACL_USER:
 			xa_entry->type = SMB_ACL_USER;
-			xa_entry->uid = from_kuid(user_ns, pa_entry->e_uid);
+			xa_entry->uid = posix_acl_uid_translate(user_ns, pa_entry);
 			break;
 		case ACL_USER_OBJ:
 			xa_entry->type = SMB_ACL_USER_OBJ;
 			break;
 		case ACL_GROUP:
 			xa_entry->type = SMB_ACL_GROUP;
-			xa_entry->gid = from_kgid(user_ns, pa_entry->e_gid);
+			xa_entry->gid = posix_acl_gid_translate(user_ns, pa_entry);
 			break;
 		case ACL_GROUP_OBJ:
 			xa_entry->type = SMB_ACL_GROUP_OBJ;
diff --git a/fs/ksmbd/vfs.h b/fs/ksmbd/vfs.h
index cb0cba0d5d07..85db50abdb24 100644
--- a/fs/ksmbd/vfs.h
+++ b/fs/ksmbd/vfs.h
@@ -107,7 +107,8 @@ struct ksmbd_kstat {
 	__le32			file_attributes;
 };
 
-int ksmbd_vfs_lock_parent(struct dentry *parent, struct dentry *child);
+int ksmbd_vfs_lock_parent(struct user_namespace *user_ns, struct dentry *parent,
+			  struct dentry *child);
 int ksmbd_vfs_may_delete(struct user_namespace *user_ns, struct dentry *dentry);
 int ksmbd_vfs_query_maximal_access(struct user_namespace *user_ns,
 				   struct dentry *dentry, __le32 *daccess);
diff --git a/fs/ksmbd/vfs_cache.c b/fs/ksmbd/vfs_cache.c
index 92d8c61ffd2a..29c1db66bd0f 100644
--- a/fs/ksmbd/vfs_cache.c
+++ b/fs/ksmbd/vfs_cache.c
@@ -666,22 +666,6 @@ void ksmbd_free_global_file_table(void)
 	ksmbd_destroy_file_table(&global_ft);
 }
 
-int ksmbd_file_table_flush(struct ksmbd_work *work)
-{
-	struct ksmbd_file	*fp = NULL;
-	unsigned int		id;
-	int			ret;
-
-	read_lock(&work->sess->file_table.lock);
-	idr_for_each_entry(work->sess->file_table.idr, fp, id) {
-		ret = ksmbd_vfs_fsync(work, fp->volatile_id, KSMBD_NO_FID);
-		if (ret)
-			break;
-	}
-	read_unlock(&work->sess->file_table.lock);
-	return ret;
-}
-
 int ksmbd_init_file_table(struct ksmbd_file_table *ft)
 {
 	ft->idr = kzalloc(sizeof(struct idr), GFP_KERNEL);
diff --git a/fs/ksmbd/vfs_cache.h b/fs/ksmbd/vfs_cache.h
index 70dfe6a99f13..448576fbe4b7 100644
--- a/fs/ksmbd/vfs_cache.h
+++ b/fs/ksmbd/vfs_cache.h
@@ -152,7 +152,6 @@ void ksmbd_close_session_fds(struct ksmbd_work *work);
 int ksmbd_close_inode_fds(struct ksmbd_work *work, struct inode *inode);
 int ksmbd_init_global_file_table(void);
 void ksmbd_free_global_file_table(void);
-int ksmbd_file_table_flush(struct ksmbd_work *work);
 void ksmbd_set_fd_limit(unsigned long limit);
 
 /*
diff --git a/fs/locks.c b/fs/locks.c
index 51a5b72ef302..3d6fb4ae847b 100644
--- a/fs/locks.c
+++ b/fs/locks.c
@@ -2941,12 +2941,10 @@ static int __init filelock_init(void)
 	int i;
 
 	flctx_cache = kmem_cache_create("file_lock_ctx",
-			sizeof(struct file_lock_context), 0,
-			SLAB_PANIC | SLAB_ACCOUNT, NULL);
+			sizeof(struct file_lock_context), 0, SLAB_PANIC, NULL);
 
 	filelock_cache = kmem_cache_create("file_lock_cache",
-			sizeof(struct file_lock), 0,
-			SLAB_PANIC | SLAB_ACCOUNT, NULL);
+			sizeof(struct file_lock), 0, SLAB_PANIC, NULL);
 
 	for_each_possible_cpu(i) {
 		struct file_lock_list_struct *fll = per_cpu_ptr(&file_lock_list, i);
diff --git a/fs/nilfs2/sysfs.c b/fs/nilfs2/sysfs.c
index 68e8d61e28dd..62f8a7ac19c8 100644
--- a/fs/nilfs2/sysfs.c
+++ b/fs/nilfs2/sysfs.c
@@ -51,11 +51,9 @@ static const struct sysfs_ops nilfs_##name##_attr_ops = { \
 #define NILFS_DEV_INT_GROUP_TYPE(name, parent_name) \
 static void nilfs_##name##_attr_release(struct kobject *kobj) \
 { \
-	struct nilfs_sysfs_##parent_name##_subgroups *subgroups; \
-	struct the_nilfs *nilfs = container_of(kobj->parent, \
-						struct the_nilfs, \
-						ns_##parent_name##_kobj); \
-	subgroups = nilfs->ns_##parent_name##_subgroups; \
+	struct nilfs_sysfs_##parent_name##_subgroups *subgroups = container_of(kobj, \
+						struct nilfs_sysfs_##parent_name##_subgroups, \
+						sg_##name##_kobj); \
 	complete(&subgroups->sg_##name##_kobj_unregister); \
 } \
 static struct kobj_type nilfs_##name##_ktype = { \
@@ -81,12 +79,12 @@ static int nilfs_sysfs_create_##name##_group(struct the_nilfs *nilfs) \
 	err = kobject_init_and_add(kobj, &nilfs_##name##_ktype, parent, \
 				    #name); \
 	if (err) \
-		return err; \
-	return 0; \
+		kobject_put(kobj); \
+	return err; \
 } \
 static void nilfs_sysfs_delete_##name##_group(struct the_nilfs *nilfs) \
 { \
-	kobject_del(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
+	kobject_put(&nilfs->ns_##parent_name##_subgroups->sg_##name##_kobj); \
 }
 
 /************************************************************************
@@ -197,14 +195,14 @@ int nilfs_sysfs_create_snapshot_group(struct nilfs_root *root)
 	}
 
 	if (err)
-		return err;
+		kobject_put(&root->snapshot_kobj);
 
-	return 0;
+	return err;
 }
 
 void nilfs_sysfs_delete_snapshot_group(struct nilfs_root *root)
 {
-	kobject_del(&root->snapshot_kobj);
+	kobject_put(&root->snapshot_kobj);
 }
 
 /************************************************************************
@@ -986,7 +984,7 @@ int nilfs_sysfs_create_device_group(struct super_block *sb)
 	err = kobject_init_and_add(&nilfs->ns_dev_kobj, &nilfs_dev_ktype, NULL,
 				    "%s", sb->s_id);
 	if (err)
-		goto free_dev_subgroups;
+		goto cleanup_dev_kobject;
 
 	err = nilfs_sysfs_create_mounted_snapshots_group(nilfs);
 	if (err)
@@ -1023,9 +1021,7 @@ delete_mounted_snapshots_group:
 	nilfs_sysfs_delete_mounted_snapshots_group(nilfs);
 
 cleanup_dev_kobject:
-	kobject_del(&nilfs->ns_dev_kobj);
-
-free_dev_subgroups:
+	kobject_put(&nilfs->ns_dev_kobj);
 	kfree(nilfs->ns_dev_subgroups);
 
 failed_create_device_group:
diff --git a/fs/nilfs2/the_nilfs.c b/fs/nilfs2/the_nilfs.c
index 8b7b01a380ce..c8bfc01da5d7 100644
--- a/fs/nilfs2/the_nilfs.c
+++ b/fs/nilfs2/the_nilfs.c
@@ -792,14 +792,13 @@ nilfs_find_or_create_root(struct the_nilfs *nilfs, __u64 cno)
 
 void nilfs_put_root(struct nilfs_root *root)
 {
-	if (refcount_dec_and_test(&root->count)) {
-		struct the_nilfs *nilfs = root->nilfs;
+	struct the_nilfs *nilfs = root->nilfs;
 
-		nilfs_sysfs_delete_snapshot_group(root);
-
-		spin_lock(&nilfs->ns_cptree_lock);
+	if (refcount_dec_and_lock(&root->count, &nilfs->ns_cptree_lock)) {
 		rb_erase(&root->rb_node, &nilfs->ns_cptree);
 		spin_unlock(&nilfs->ns_cptree_lock);
+
+		nilfs_sysfs_delete_snapshot_group(root);
 		iput(root->ifile);
 
 		kfree(root);
diff --git a/fs/notify/mark.c b/fs/notify/mark.c
index 95006d1d29ab..fa1d99101f89 100644
--- a/fs/notify/mark.c
+++ b/fs/notify/mark.c
@@ -531,6 +531,7 @@ static int fsnotify_attach_connector_to_object(fsnotify_connp_t *connp,
 		/* Someone else created list structure for us */
 		if (inode)
 			fsnotify_put_inode_ref(inode);
+		fsnotify_put_sb_connectors(conn);
 		kmem_cache_free(fsnotify_mark_connector_cachep, conn);
 	}
 
diff --git a/fs/pipe.c b/fs/pipe.c
index 1fa1f52763f0..6d4342bad9f1 100644
--- a/fs/pipe.c
+++ b/fs/pipe.c
@@ -191,7 +191,7 @@ EXPORT_SYMBOL(generic_pipe_buf_try_steal);
  */
 bool generic_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf)
 {
-	return try_get_compound_head(buf->page, 1);
+	return try_get_page(buf->page);
 }
 EXPORT_SYMBOL(generic_pipe_buf_get);
 
diff --git a/fs/proc/array.c b/fs/proc/array.c
index ee0ce8cecc4a..49be8c8ef555 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -98,27 +98,17 @@
 
 void proc_task_name(struct seq_file *m, struct task_struct *p, bool escape)
 {
-	char *buf;
-	size_t size;
 	char tcomm[64];
-	int ret;
 
 	if (p->flags & PF_WQ_WORKER)
 		wq_worker_comm(tcomm, sizeof(tcomm), p);
 	else
 		__get_task_comm(tcomm, sizeof(tcomm), p);
 
-	size = seq_get_buf(m, &buf);
-	if (escape) {
-		ret = string_escape_str(tcomm, buf, size,
-					ESCAPE_SPACE | ESCAPE_SPECIAL, "\n\\");
-		if (ret >= size)
-			ret = -1;
-	} else {
-		ret = strscpy(buf, tcomm, size);
-	}
-
-	seq_commit(m, ret);
+	if (escape)
+		seq_escape_str(m, tcomm, ESCAPE_SPACE | ESCAPE_SPECIAL, "\n\\");
+	else
+		seq_printf(m, "%.64s", tcomm);
 }
 
 /*
diff --git a/fs/proc/base.c b/fs/proc/base.c
index e5b5f7709d48..533d5836eb9a 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -95,6 +95,7 @@
 #include <linux/posix-timers.h>
 #include <linux/time_namespace.h>
 #include <linux/resctrl.h>
+#include <linux/cn_proc.h>
 #include <trace/events/oom.h>
 #include "internal.h"
 #include "fd.h"
@@ -1674,8 +1675,10 @@ static ssize_t comm_write(struct file *file, const char __user *buf,
 	if (!p)
 		return -ESRCH;
 
-	if (same_thread_group(current, p))
+	if (same_thread_group(current, p)) {
 		set_task_comm(p, buffer);
+		proc_comm_connector(p);
+	}
 	else
 		count = -EINVAL;
 
diff --git a/fs/select.c b/fs/select.c
index e83e563a351d..945896d0ac9e 100644
--- a/fs/select.c
+++ b/fs/select.c
@@ -655,7 +655,7 @@ int core_sys_select(int n, fd_set __user *inp, fd_set __user *outp,
 			goto out_nofds;
 
 		alloc_size = 6 * size;
-		bits = kvmalloc(alloc_size, GFP_KERNEL_ACCOUNT);
+		bits = kvmalloc(alloc_size, GFP_KERNEL);
 		if (!bits)
 			goto out_nofds;
 	}
@@ -1000,7 +1000,7 @@ static int do_sys_poll(struct pollfd __user *ufds, unsigned int nfds,
 
 		len = min(todo, POLLFD_PER_PAGE);
 		walk = walk->next = kmalloc(struct_size(walk, entries, len),
-					    GFP_KERNEL_ACCOUNT);
+					    GFP_KERNEL);
 		if (!walk) {
 			err = -ENOMEM;
 			goto out_fds;
diff --git a/fs/xfs/xfs_super.c b/fs/xfs/xfs_super.c
index 9a86d3ec2cb6..c4e0cd1c1c8c 100644
--- a/fs/xfs/xfs_super.c
+++ b/fs/xfs/xfs_super.c
@@ -330,6 +330,15 @@ xfs_set_inode_alloc(
 	return xfs_is_inode32(mp) ? maxagi : agcount;
 }
 
+static bool
+xfs_buftarg_is_dax(
+	struct super_block	*sb,
+	struct xfs_buftarg	*bt)
+{
+	return dax_supported(bt->bt_daxdev, bt->bt_bdev, sb->s_blocksize, 0,
+			bdev_nr_sectors(bt->bt_bdev));
+}
+
 STATIC int
 xfs_blkdev_get(
 	xfs_mount_t		*mp,
@@ -1588,11 +1597,10 @@ xfs_fs_fill_super(
 		xfs_warn(mp,
 		"DAX enabled. Warning: EXPERIMENTAL, use at your own risk");
 
-		datadev_is_dax = bdev_dax_supported(mp->m_ddev_targp->bt_bdev,
-			sb->s_blocksize);
+		datadev_is_dax = xfs_buftarg_is_dax(sb, mp->m_ddev_targp);
 		if (mp->m_rtdev_targp)
-			rtdev_is_dax = bdev_dax_supported(
-				mp->m_rtdev_targp->bt_bdev, sb->s_blocksize);
+			rtdev_is_dax = xfs_buftarg_is_dax(sb,
+						mp->m_rtdev_targp);
 		if (!rtdev_is_dax && !datadev_is_dax) {
 			xfs_alert(mp,
 			"DAX unsupported by block device. Turning off DAX.");
diff --git a/include/acpi/cppc_acpi.h b/include/acpi/cppc_acpi.h
index 9f4985b4d64d..bc159a9b4a73 100644
--- a/include/acpi/cppc_acpi.h
+++ b/include/acpi/cppc_acpi.h
@@ -135,6 +135,7 @@ struct cppc_cpudata {
 
 #ifdef CONFIG_ACPI_CPPC_LIB
 extern int cppc_get_desired_perf(int cpunum, u64 *desired_perf);
+extern int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf);
 extern int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs);
 extern int cppc_set_perf(int cpu, struct cppc_perf_ctrls *perf_ctrls);
 extern int cppc_get_perf_caps(int cpu, struct cppc_perf_caps *caps);
@@ -149,6 +150,10 @@ static inline int cppc_get_desired_perf(int cpunum, u64 *desired_perf)
 {
 	return -ENOTSUPP;
 }
+static inline int cppc_get_nominal_perf(int cpunum, u64 *nominal_perf)
+{
+	return -ENOTSUPP;
+}
 static inline int cppc_get_perf_ctrs(int cpu, struct cppc_perf_fb_ctrs *perf_fb_ctrs)
 {
 	return -ENOTSUPP;
diff --git a/include/asm-generic/div64.h b/include/asm-generic/div64.h
index cd905b44a630..13f5aa68a455 100644
--- a/include/asm-generic/div64.h
+++ b/include/asm-generic/div64.h
@@ -57,17 +57,11 @@
 /*
  * If the divisor happens to be constant, we determine the appropriate
  * inverse at compile time to turn the division into a few inline
- * multiplications which ought to be much faster. And yet only if compiling
- * with a sufficiently recent gcc version to perform proper 64-bit constant
- * propagation.
+ * multiplications which ought to be much faster.
  *
  * (It is unfortunate that gcc doesn't perform all this internally.)
  */
 
-#ifndef __div64_const32_is_OK
-#define __div64_const32_is_OK (__GNUC__ >= 4)
-#endif
-
 #define __div64_const32(n, ___b)					\
 ({									\
 	/*								\
@@ -230,8 +224,7 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
 	    is_power_of_2(__base)) {			\
 		__rem = (n) & (__base - 1);		\
 		(n) >>= ilog2(__base);			\
-	} else if (__div64_const32_is_OK &&		\
-		   __builtin_constant_p(__base) &&	\
+	} else if (__builtin_constant_p(__base) &&	\
 		   __base != 0) {			\
 		uint32_t __res_lo, __n_lo = (n);	\
 		(n) = __div64_const32(n, __base);	\
@@ -241,8 +234,9 @@ extern uint32_t __div64_32(uint64_t *dividend, uint32_t divisor);
 	} else if (likely(((n) >> 32) == 0)) {		\
 		__rem = (uint32_t)(n) % __base;		\
 		(n) = (uint32_t)(n) / __base;		\
-	} else 						\
+	} else {					\
 		__rem = __div64_32(&(n), __base);	\
+	}						\
 	__rem;						\
  })
 
diff --git a/include/asm-generic/early_ioremap.h b/include/asm-generic/early_ioremap.h
index 9def22e6e2b3..9d0479f50f97 100644
--- a/include/asm-generic/early_ioremap.h
+++ b/include/asm-generic/early_ioremap.h
@@ -19,12 +19,6 @@ extern void *early_memremap_prot(resource_size_t phys_addr,
 extern void early_iounmap(void __iomem *addr, unsigned long size);
 extern void early_memunmap(void *addr, unsigned long size);
 
-/*
- * Weak function called by early_ioremap_reset(). It does nothing, but
- * architectures may provide their own version to do any needed cleanups.
- */
-extern void early_ioremap_shutdown(void);
-
 #if defined(CONFIG_GENERIC_EARLY_IOREMAP) && defined(CONFIG_MMU)
 /* Arch-specific initialization */
 extern void early_ioremap_init(void);
diff --git a/include/asm-generic/pci_iomap.h b/include/asm-generic/pci_iomap.h
index d4f16dcc2ed7..df636c6d8e6c 100644
--- a/include/asm-generic/pci_iomap.h
+++ b/include/asm-generic/pci_iomap.h
@@ -52,4 +52,4 @@ static inline void __iomem *pci_iomap_wc_range(struct pci_dev *dev, int bar,
 }
 #endif
 
-#endif /* __ASM_GENERIC_IO_H */
+#endif /* __ASM_GENERIC_PCI_IOMAP_H */
diff --git a/include/drm/ttm/ttm_tt.h b/include/drm/ttm/ttm_tt.h
index 818680c6a8ed..b20e89d321b0 100644
--- a/include/drm/ttm/ttm_tt.h
+++ b/include/drm/ttm/ttm_tt.h
@@ -27,11 +27,12 @@
 #ifndef _TTM_TT_H_
 #define _TTM_TT_H_
 
+#include <linux/pagemap.h>
 #include <linux/types.h>
 #include <drm/ttm/ttm_caching.h>
 #include <drm/ttm/ttm_kmap_iter.h>
 
-struct ttm_bo_device;
+struct ttm_device;
 struct ttm_tt;
 struct ttm_resource;
 struct ttm_buffer_object;
diff --git a/include/dt-bindings/reset/mt8195-resets.h b/include/dt-bindings/reset/mt8195-resets.h
new file mode 100644
index 000000000000..a26bccc8b957
--- /dev/null
+++ b/include/dt-bindings/reset/mt8195-resets.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause)*/
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ * Author: Christine Zhu <christine.zhu@mediatek.com>
+ */
+
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_MT8195
+#define _DT_BINDINGS_RESET_CONTROLLER_MT8195
+
+#define MT8195_TOPRGU_CONN_MCU_SW_RST          0
+#define MT8195_TOPRGU_INFRA_GRST_SW_RST        1
+#define MT8195_TOPRGU_APU_SW_RST               2
+#define MT8195_TOPRGU_INFRA_AO_GRST_SW_RST     6
+#define MT8195_TOPRGU_MMSYS_SW_RST             7
+#define MT8195_TOPRGU_MFG_SW_RST               8
+#define MT8195_TOPRGU_VENC_SW_RST              9
+#define MT8195_TOPRGU_VDEC_SW_RST              10
+#define MT8195_TOPRGU_IMG_SW_RST               11
+#define MT8195_TOPRGU_APMIXEDSYS_SW_RST        13
+#define MT8195_TOPRGU_AUDIO_SW_RST             14
+#define MT8195_TOPRGU_CAMSYS_SW_RST            15
+#define MT8195_TOPRGU_EDPTX_SW_RST             16
+#define MT8195_TOPRGU_ADSPSYS_SW_RST           21
+#define MT8195_TOPRGU_DPTX_SW_RST              22
+#define MT8195_TOPRGU_SPMI_MST_SW_RST          23
+
+#define MT8195_TOPRGU_SW_RST_NUM               16
+
+#endif  /* _DT_BINDINGS_RESET_CONTROLLER_MT8195 */
diff --git a/include/linux/bootconfig.h b/include/linux/bootconfig.h
index abe089c27529..537e1b991f11 100644
--- a/include/linux/bootconfig.h
+++ b/include/linux/bootconfig.h
@@ -110,7 +110,7 @@ static inline __init bool xbc_node_is_leaf(struct xbc_node *node)
 }
 
 /* Tree-based key-value access APIs */
-struct xbc_node * __init xbc_node_find_child(struct xbc_node *parent,
+struct xbc_node * __init xbc_node_find_subkey(struct xbc_node *parent,
 					     const char *key);
 
 const char * __init xbc_node_find_value(struct xbc_node *parent,
@@ -148,7 +148,7 @@ xbc_find_value(const char *key, struct xbc_node **vnode)
  */
 static inline struct xbc_node * __init xbc_find_node(const char *key)
 {
-	return xbc_node_find_child(NULL, key);
+	return xbc_node_find_subkey(NULL, key);
 }
 
 /**
diff --git a/include/linux/ceph/ceph_fs.h b/include/linux/ceph/ceph_fs.h
index e41a811026f6..bc2699feddbe 100644
--- a/include/linux/ceph/ceph_fs.h
+++ b/include/linux/ceph/ceph_fs.h
@@ -299,6 +299,7 @@ enum {
 	CEPH_SESSION_FLUSHMSG_ACK,
 	CEPH_SESSION_FORCE_RO,
 	CEPH_SESSION_REJECT,
+	CEPH_SESSION_REQUEST_FLUSH_MDLOG,
 };
 
 extern const char *ceph_session_op_name(int op);
diff --git a/include/linux/compat.h b/include/linux/compat.h
index 8e0598c7d1d1..1c758b0e0359 100644
--- a/include/linux/compat.h
+++ b/include/linux/compat.h
@@ -395,14 +395,6 @@ struct compat_kexec_segment;
 struct compat_mq_attr;
 struct compat_msgbuf;
 
-#define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
-
-#define BITS_TO_COMPAT_LONGS(bits) DIV_ROUND_UP(bits, BITS_PER_COMPAT_LONG)
-
-long compat_get_bitmap(unsigned long *mask, const compat_ulong_t __user *umask,
-		       unsigned long bitmap_size);
-long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
-		       unsigned long bitmap_size);
 void copy_siginfo_to_external32(struct compat_siginfo *to,
 		const struct kernel_siginfo *from);
 int copy_siginfo_from_user32(kernel_siginfo_t *to,
@@ -519,8 +511,6 @@ extern long compat_arch_ptrace(struct task_struct *child, compat_long_t request,
 
 struct epoll_event;	/* fortunately, this one is fixed-layout */
 
-extern void __user *compat_alloc_user_space(unsigned long len);
-
 int compat_restore_altstack(const compat_stack_t __user *uss);
 int __compat_save_altstack(compat_stack_t __user *, unsigned long);
 #define unsafe_compat_save_altstack(uss, sp, label) do { \
@@ -807,26 +797,6 @@ asmlinkage long compat_sys_execve(const char __user *filename, const compat_uptr
 /* mm/fadvise.c: No generic prototype for fadvise64_64 */
 
 /* mm/, CONFIG_MMU only */
-asmlinkage long compat_sys_mbind(compat_ulong_t start, compat_ulong_t len,
-				 compat_ulong_t mode,
-				 compat_ulong_t __user *nmask,
-				 compat_ulong_t maxnode, compat_ulong_t flags);
-asmlinkage long compat_sys_get_mempolicy(int __user *policy,
-					 compat_ulong_t __user *nmask,
-					 compat_ulong_t maxnode,
-					 compat_ulong_t addr,
-					 compat_ulong_t flags);
-asmlinkage long compat_sys_set_mempolicy(int mode, compat_ulong_t __user *nmask,
-					 compat_ulong_t maxnode);
-asmlinkage long compat_sys_migrate_pages(compat_pid_t pid,
-		compat_ulong_t maxnode, const compat_ulong_t __user *old_nodes,
-		const compat_ulong_t __user *new_nodes);
-asmlinkage long compat_sys_move_pages(pid_t pid, compat_ulong_t nr_pages,
-				      __u32 __user *pages,
-				      const int __user *nodes,
-				      int __user *status,
-				      int flags);
-
 asmlinkage long compat_sys_rt_tgsigqueueinfo(compat_pid_t tgid,
 					compat_pid_t pid, int sig,
 					struct compat_siginfo __user *uinfo);
@@ -976,6 +946,15 @@ static inline bool in_compat_syscall(void) { return false; }
 
 #endif /* CONFIG_COMPAT */
 
+#define BITS_PER_COMPAT_LONG    (8*sizeof(compat_long_t))
+
+#define BITS_TO_COMPAT_LONGS(bits) DIV_ROUND_UP(bits, BITS_PER_COMPAT_LONG)
+
+long compat_get_bitmap(unsigned long *mask, const compat_ulong_t __user *umask,
+		       unsigned long bitmap_size);
+long compat_put_bitmap(compat_ulong_t __user *umask, unsigned long *mask,
+		       unsigned long bitmap_size);
+
 /*
  * Some legacy ABIs like the i386 one use less than natural alignment for 64-bit
  * types, and will need special compat treatment for that.  Most architectures
diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h
index 9fd719475fcd..ff88bb3e44fc 100644
--- a/include/linux/cpufreq.h
+++ b/include/linux/cpufreq.h
@@ -9,10 +9,14 @@
 #define _LINUX_CPUFREQ_H
 
 #include <linux/clk.h>
+#include <linux/cpu.h>
 #include <linux/cpumask.h>
 #include <linux/completion.h>
 #include <linux/kobject.h>
 #include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/pm_opp.h>
 #include <linux/pm_qos.h>
 #include <linux/spinlock.h>
 #include <linux/sysfs.h>
@@ -365,14 +369,17 @@ struct cpufreq_driver {
 	int		(*suspend)(struct cpufreq_policy *policy);
 	int		(*resume)(struct cpufreq_policy *policy);
 
-	/* Will be called after the driver is fully initialized */
-	void		(*ready)(struct cpufreq_policy *policy);
-
 	struct freq_attr **attr;
 
 	/* platform specific boost support code */
 	bool		boost_enabled;
 	int		(*set_boost)(struct cpufreq_policy *policy, int state);
+
+	/*
+	 * Set by drivers that want to register with the energy model after the
+	 * policy is properly initialized, but before the governor is started.
+	 */
+	void		(*register_em)(struct cpufreq_policy *policy);
 };
 
 /* flags */
@@ -995,6 +1002,55 @@ static inline int cpufreq_table_count_valid_entries(const struct cpufreq_policy
 
 	return count;
 }
+
+static inline int parse_perf_domain(int cpu, const char *list_name,
+				    const char *cell_name)
+{
+	struct device_node *cpu_np;
+	struct of_phandle_args args;
+	int ret;
+
+	cpu_np = of_cpu_device_node_get(cpu);
+	if (!cpu_np)
+		return -ENODEV;
+
+	ret = of_parse_phandle_with_args(cpu_np, list_name, cell_name, 0,
+					 &args);
+	if (ret < 0)
+		return ret;
+
+	of_node_put(cpu_np);
+
+	return args.args[0];
+}
+
+static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_name,
+						     const char *cell_name, struct cpumask *cpumask)
+{
+	int target_idx;
+	int cpu, ret;
+
+	ret = parse_perf_domain(pcpu, list_name, cell_name);
+	if (ret < 0)
+		return ret;
+
+	target_idx = ret;
+	cpumask_set_cpu(pcpu, cpumask);
+
+	for_each_possible_cpu(cpu) {
+		if (cpu == pcpu)
+			continue;
+
+		ret = parse_perf_domain(pcpu, list_name, cell_name);
+		if (ret < 0)
+			continue;
+
+		if (target_idx == ret)
+			cpumask_set_cpu(cpu, cpumask);
+	}
+
+	return target_idx;
+}
 #else
 static inline int cpufreq_boost_trigger_state(int state)
 {
@@ -1014,6 +1070,12 @@ static inline bool policy_has_boost_freq(struct cpufreq_policy *policy)
 {
 	return false;
 }
+
+static inline int of_perf_domain_get_sharing_cpumask(int pcpu, const char *list_name,
+						     const char *cell_name, struct cpumask *cpumask)
+{
+	return -EOPNOTSUPP;
+}
 #endif
 
 #if defined(CONFIG_ENERGY_MODEL) && defined(CONFIG_CPU_FREQ_GOV_SCHEDUTIL)
@@ -1035,7 +1097,6 @@ void arch_set_freq_scale(const struct cpumask *cpus,
 {
 }
 #endif
-
 /* the following are really really optional */
 extern struct freq_attr cpufreq_freq_attr_scaling_available_freqs;
 extern struct freq_attr cpufreq_freq_attr_scaling_boost_freqs;
@@ -1046,4 +1107,10 @@ unsigned int cpufreq_generic_get(unsigned int cpu);
 void cpufreq_generic_init(struct cpufreq_policy *policy,
 		struct cpufreq_frequency_table *table,
 		unsigned int transition_latency);
+
+static inline void cpufreq_register_em_with_opp(struct cpufreq_policy *policy)
+{
+	dev_pm_opp_of_register_em(get_cpu_device(policy->cpu),
+				  policy->related_cpus);
+}
 #endif /* _LINUX_CPUFREQ_H */
diff --git a/include/linux/damon.h b/include/linux/damon.h
new file mode 100644
index 000000000000..d68b67b8d458
--- /dev/null
+++ b/include/linux/damon.h
@@ -0,0 +1,268 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * DAMON api
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#ifndef _DAMON_H_
+#define _DAMON_H_
+
+#include <linux/mutex.h>
+#include <linux/time64.h>
+#include <linux/types.h>
+
+/* Minimal region size.  Every damon_region is aligned by this. */
+#define DAMON_MIN_REGION	PAGE_SIZE
+
+/**
+ * struct damon_addr_range - Represents an address region of [@start, @end).
+ * @start:	Start address of the region (inclusive).
+ * @end:	End address of the region (exclusive).
+ */
+struct damon_addr_range {
+	unsigned long start;
+	unsigned long end;
+};
+
+/**
+ * struct damon_region - Represents a monitoring target region.
+ * @ar:			The address range of the region.
+ * @sampling_addr:	Address of the sample for the next access check.
+ * @nr_accesses:	Access frequency of this region.
+ * @list:		List head for siblings.
+ */
+struct damon_region {
+	struct damon_addr_range ar;
+	unsigned long sampling_addr;
+	unsigned int nr_accesses;
+	struct list_head list;
+};
+
+/**
+ * struct damon_target - Represents a monitoring target.
+ * @id:			Unique identifier for this target.
+ * @nr_regions:		Number of monitoring target regions of this target.
+ * @regions_list:	Head of the monitoring target regions of this target.
+ * @list:		List head for siblings.
+ *
+ * Each monitoring context could have multiple targets.  For example, a context
+ * for virtual memory address spaces could have multiple target processes.  The
+ * @id of each target should be unique among the targets of the context.  For
+ * example, in the virtual address monitoring context, it could be a pidfd or
+ * an address of an mm_struct.
+ */
+struct damon_target {
+	unsigned long id;
+	unsigned int nr_regions;
+	struct list_head regions_list;
+	struct list_head list;
+};
+
+struct damon_ctx;
+
+/**
+ * struct damon_primitive	Monitoring primitives for given use cases.
+ *
+ * @init:			Initialize primitive-internal data structures.
+ * @update:			Update primitive-internal data structures.
+ * @prepare_access_checks:	Prepare next access check of target regions.
+ * @check_accesses:		Check the accesses to target regions.
+ * @reset_aggregated:		Reset aggregated accesses monitoring results.
+ * @target_valid:		Determine if the target is valid.
+ * @cleanup:			Clean up the context.
+ *
+ * DAMON can be extended for various address spaces and usages.  For this,
+ * users should register the low level primitives for their target address
+ * space and usecase via the &damon_ctx.primitive.  Then, the monitoring thread
+ * (&damon_ctx.kdamond) calls @init and @prepare_access_checks before starting
+ * the monitoring, @update after each &damon_ctx.primitive_update_interval, and
+ * @check_accesses, @target_valid and @prepare_access_checks after each
+ * &damon_ctx.sample_interval.  Finally, @reset_aggregated is called after each
+ * &damon_ctx.aggr_interval.
+ *
+ * @init should initialize primitive-internal data structures.  For example,
+ * this could be used to construct proper monitoring target regions and link
+ * those to @damon_ctx.adaptive_targets.
+ * @update should update the primitive-internal data structures.  For example,
+ * this could be used to update monitoring target regions for current status.
+ * @prepare_access_checks should manipulate the monitoring regions to be
+ * prepared for the next access check.
+ * @check_accesses should check the accesses to each region that made after the
+ * last preparation and update the number of observed accesses of each region.
+ * It should also return max number of observed accesses that made as a result
+ * of its update.  The value will be used for regions adjustment threshold.
+ * @reset_aggregated should reset the access monitoring results that aggregated
+ * by @check_accesses.
+ * @target_valid should check whether the target is still valid for the
+ * monitoring.
+ * @cleanup is called from @kdamond just before its termination.
+ */
+struct damon_primitive {
+	void (*init)(struct damon_ctx *context);
+	void (*update)(struct damon_ctx *context);
+	void (*prepare_access_checks)(struct damon_ctx *context);
+	unsigned int (*check_accesses)(struct damon_ctx *context);
+	void (*reset_aggregated)(struct damon_ctx *context);
+	bool (*target_valid)(void *target);
+	void (*cleanup)(struct damon_ctx *context);
+};
+
+/*
+ * struct damon_callback	Monitoring events notification callbacks.
+ *
+ * @before_start:	Called before starting the monitoring.
+ * @after_sampling:	Called after each sampling.
+ * @after_aggregation:	Called after each aggregation.
+ * @before_terminate:	Called before terminating the monitoring.
+ * @private:		User private data.
+ *
+ * The monitoring thread (&damon_ctx.kdamond) calls @before_start and
+ * @before_terminate just before starting and finishing the monitoring,
+ * respectively.  Therefore, those are good places for installing and cleaning
+ * @private.
+ *
+ * The monitoring thread calls @after_sampling and @after_aggregation for each
+ * of the sampling intervals and aggregation intervals, respectively.
+ * Therefore, users can safely access the monitoring results without additional
+ * protection.  For the reason, users are recommended to use these callback for
+ * the accesses to the results.
+ *
+ * If any callback returns non-zero, monitoring stops.
+ */
+struct damon_callback {
+	void *private;
+
+	int (*before_start)(struct damon_ctx *context);
+	int (*after_sampling)(struct damon_ctx *context);
+	int (*after_aggregation)(struct damon_ctx *context);
+	int (*before_terminate)(struct damon_ctx *context);
+};
+
+/**
+ * struct damon_ctx - Represents a context for each monitoring.  This is the
+ * main interface that allows users to set the attributes and get the results
+ * of the monitoring.
+ *
+ * @sample_interval:		The time between access samplings.
+ * @aggr_interval:		The time between monitor results aggregations.
+ * @primitive_update_interval:	The time between monitoring primitive updates.
+ *
+ * For each @sample_interval, DAMON checks whether each region is accessed or
+ * not.  It aggregates and keeps the access information (number of accesses to
+ * each region) for @aggr_interval time.  DAMON also checks whether the target
+ * memory regions need update (e.g., by ``mmap()`` calls from the application,
+ * in case of virtual memory monitoring) and applies the changes for each
+ * @primitive_update_interval.  All time intervals are in micro-seconds.
+ * Please refer to &struct damon_primitive and &struct damon_callback for more
+ * detail.
+ *
+ * @kdamond:		Kernel thread who does the monitoring.
+ * @kdamond_stop:	Notifies whether kdamond should stop.
+ * @kdamond_lock:	Mutex for the synchronizations with @kdamond.
+ *
+ * For each monitoring context, one kernel thread for the monitoring is
+ * created.  The pointer to the thread is stored in @kdamond.
+ *
+ * Once started, the monitoring thread runs until explicitly required to be
+ * terminated or every monitoring target is invalid.  The validity of the
+ * targets is checked via the &damon_primitive.target_valid of @primitive.  The
+ * termination can also be explicitly requested by writing non-zero to
+ * @kdamond_stop.  The thread sets @kdamond to NULL when it terminates.
+ * Therefore, users can know whether the monitoring is ongoing or terminated by
+ * reading @kdamond.  Reads and writes to @kdamond and @kdamond_stop from
+ * outside of the monitoring thread must be protected by @kdamond_lock.
+ *
+ * Note that the monitoring thread protects only @kdamond and @kdamond_stop via
+ * @kdamond_lock.  Accesses to other fields must be protected by themselves.
+ *
+ * @primitive:	Set of monitoring primitives for given use cases.
+ * @callback:	Set of callbacks for monitoring events notifications.
+ *
+ * @min_nr_regions:	The minimum number of adaptive monitoring regions.
+ * @max_nr_regions:	The maximum number of adaptive monitoring regions.
+ * @adaptive_targets:	Head of monitoring targets (&damon_target) list.
+ */
+struct damon_ctx {
+	unsigned long sample_interval;
+	unsigned long aggr_interval;
+	unsigned long primitive_update_interval;
+
+/* private: internal use only */
+	struct timespec64 last_aggregation;
+	struct timespec64 last_primitive_update;
+
+/* public: */
+	struct task_struct *kdamond;
+	bool kdamond_stop;
+	struct mutex kdamond_lock;
+
+	struct damon_primitive primitive;
+	struct damon_callback callback;
+
+	unsigned long min_nr_regions;
+	unsigned long max_nr_regions;
+	struct list_head adaptive_targets;
+};
+
+#define damon_next_region(r) \
+	(container_of(r->list.next, struct damon_region, list))
+
+#define damon_prev_region(r) \
+	(container_of(r->list.prev, struct damon_region, list))
+
+#define damon_for_each_region(r, t) \
+	list_for_each_entry(r, &t->regions_list, list)
+
+#define damon_for_each_region_safe(r, next, t) \
+	list_for_each_entry_safe(r, next, &t->regions_list, list)
+
+#define damon_for_each_target(t, ctx) \
+	list_for_each_entry(t, &(ctx)->adaptive_targets, list)
+
+#define damon_for_each_target_safe(t, next, ctx)	\
+	list_for_each_entry_safe(t, next, &(ctx)->adaptive_targets, list)
+
+#ifdef CONFIG_DAMON
+
+struct damon_region *damon_new_region(unsigned long start, unsigned long end);
+inline void damon_insert_region(struct damon_region *r,
+		struct damon_region *prev, struct damon_region *next,
+		struct damon_target *t);
+void damon_add_region(struct damon_region *r, struct damon_target *t);
+void damon_destroy_region(struct damon_region *r, struct damon_target *t);
+
+struct damon_target *damon_new_target(unsigned long id);
+void damon_add_target(struct damon_ctx *ctx, struct damon_target *t);
+void damon_free_target(struct damon_target *t);
+void damon_destroy_target(struct damon_target *t);
+unsigned int damon_nr_regions(struct damon_target *t);
+
+struct damon_ctx *damon_new_ctx(void);
+void damon_destroy_ctx(struct damon_ctx *ctx);
+int damon_set_targets(struct damon_ctx *ctx,
+		unsigned long *ids, ssize_t nr_ids);
+int damon_set_attrs(struct damon_ctx *ctx, unsigned long sample_int,
+		unsigned long aggr_int, unsigned long primitive_upd_int,
+		unsigned long min_nr_reg, unsigned long max_nr_reg);
+int damon_nr_running_ctxs(void);
+
+int damon_start(struct damon_ctx **ctxs, int nr_ctxs);
+int damon_stop(struct damon_ctx **ctxs, int nr_ctxs);
+
+#endif	/* CONFIG_DAMON */
+
+#ifdef CONFIG_DAMON_VADDR
+
+/* Monitoring primitives for virtual memory address spaces */
+void damon_va_init(struct damon_ctx *ctx);
+void damon_va_update(struct damon_ctx *ctx);
+void damon_va_prepare_access_checks(struct damon_ctx *ctx);
+unsigned int damon_va_check_accesses(struct damon_ctx *ctx);
+bool damon_va_target_valid(void *t);
+void damon_va_cleanup(struct damon_ctx *ctx);
+void damon_va_set_primitives(struct damon_ctx *ctx);
+
+#endif	/* CONFIG_DAMON_VADDR */
+
+#endif	/* _DAMON_H */
diff --git a/include/linux/dax.h b/include/linux/dax.h
index b52f084aa643..2619d94c308d 100644
--- a/include/linux/dax.h
+++ b/include/linux/dax.h
@@ -41,7 +41,6 @@ struct dax_operations {
 extern struct attribute_group dax_attribute_group;
 
 #if IS_ENABLED(CONFIG_DAX)
-struct dax_device *dax_get_by_host(const char *host);
 struct dax_device *alloc_dax(void *private, const char *host,
 		const struct dax_operations *ops, unsigned long flags);
 void put_dax(struct dax_device *dax_dev);
@@ -58,8 +57,6 @@ static inline void set_dax_synchronous(struct dax_device *dax_dev)
 {
 	__set_dax_synchronous(dax_dev);
 }
-bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,
-		int blocksize, sector_t start, sector_t len);
 /*
  * Check if given mapping is supported by the file / underlying device.
  */
@@ -73,10 +70,6 @@ static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
 	return dax_synchronous(dax_dev);
 }
 #else
-static inline struct dax_device *dax_get_by_host(const char *host)
-{
-	return NULL;
-}
 static inline struct dax_device *alloc_dax(void *private, const char *host,
 		const struct dax_operations *ops, unsigned long flags)
 {
@@ -106,12 +99,6 @@ static inline bool dax_synchronous(struct dax_device *dax_dev)
 static inline void set_dax_synchronous(struct dax_device *dax_dev)
 {
 }
-static inline bool dax_supported(struct dax_device *dax_dev,
-		struct block_device *bdev, int blocksize, sector_t start,
-		sector_t len)
-{
-	return false;
-}
 static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
 				struct dax_device *dax_dev)
 {
@@ -122,22 +109,12 @@ static inline bool daxdev_mapping_supported(struct vm_area_struct *vma,
 struct writeback_control;
 int bdev_dax_pgoff(struct block_device *, sector_t, size_t, pgoff_t *pgoff);
 #if IS_ENABLED(CONFIG_FS_DAX)
-bool __bdev_dax_supported(struct block_device *bdev, int blocksize);
-static inline bool bdev_dax_supported(struct block_device *bdev, int blocksize)
-{
-	return __bdev_dax_supported(bdev, blocksize);
-}
-
-bool __generic_fsdax_supported(struct dax_device *dax_dev,
+bool generic_fsdax_supported(struct dax_device *dax_dev,
 		struct block_device *bdev, int blocksize, sector_t start,
 		sector_t sectors);
-static inline bool generic_fsdax_supported(struct dax_device *dax_dev,
-		struct block_device *bdev, int blocksize, sector_t start,
-		sector_t sectors)
-{
-	return __generic_fsdax_supported(dax_dev, bdev, blocksize, start,
-			sectors);
-}
+
+bool dax_supported(struct dax_device *dax_dev, struct block_device *bdev,
+		int blocksize, sector_t start, sector_t len);
 
 static inline void fs_put_dax(struct dax_device *dax_dev)
 {
@@ -153,15 +130,11 @@ struct page *dax_layout_busy_page_range(struct address_space *mapping, loff_t st
 dax_entry_t dax_lock_page(struct page *page);
 void dax_unlock_page(struct page *page, dax_entry_t cookie);
 #else
-static inline bool bdev_dax_supported(struct block_device *bdev,
-		int blocksize)
-{
-	return false;
-}
+#define generic_fsdax_supported		NULL
 
-static inline bool generic_fsdax_supported(struct dax_device *dax_dev,
+static inline bool dax_supported(struct dax_device *dax_dev,
 		struct block_device *bdev, int blocksize, sector_t start,
-		sector_t sectors)
+		sector_t len)
 {
 	return false;
 }
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 93c3ca5fdafd..e5c2c9e71bf1 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -380,6 +380,7 @@ enum dma_slave_buswidth {
 	DMA_SLAVE_BUSWIDTH_16_BYTES = 16,
 	DMA_SLAVE_BUSWIDTH_32_BYTES = 32,
 	DMA_SLAVE_BUSWIDTH_64_BYTES = 64,
+	DMA_SLAVE_BUSWIDTH_128_BYTES = 128,
 };
 
 /**
@@ -398,7 +399,7 @@ enum dma_slave_buswidth {
  * @src_addr_width: this is the width in bytes of the source (RX)
  * register where DMA data shall be read. If the source
  * is memory this may be ignored depending on architecture.
- * Legal values: 1, 2, 3, 4, 8, 16, 32, 64.
+ * Legal values: 1, 2, 3, 4, 8, 16, 32, 64, 128.
  * @dst_addr_width: same as src_addr_width but for destination
  * target (TX) mutatis mutandis.
  * @src_maxburst: the maximum number of words (note: words, as in
diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
index 1834752c5617..39dcadd492b5 100644
--- a/include/linux/energy_model.h
+++ b/include/linux/energy_model.h
@@ -11,7 +11,7 @@
 #include <linux/types.h>
 
 /**
- * em_perf_state - Performance state of a performance domain
+ * struct em_perf_state - Performance state of a performance domain
  * @frequency:	The frequency in KHz, for consistency with CPUFreq
  * @power:	The power consumed at this level (by 1 CPU or by a registered
  *		device). It can be a total power: static and dynamic.
@@ -25,7 +25,7 @@ struct em_perf_state {
 };
 
 /**
- * em_perf_domain - Performance domain
+ * struct em_perf_domain - Performance domain
  * @table:		List of performance states, in ascending order
  * @nr_perf_states:	Number of performance states
  * @milliwatts:		Flag indicating the power values are in milli-Watts
@@ -103,12 +103,12 @@ void em_dev_unregister_perf_domain(struct device *dev);
 
 /**
  * em_cpu_energy() - Estimates the energy consumed by the CPUs of a
-		performance domain
+ *		performance domain
  * @pd		: performance domain for which energy has to be estimated
  * @max_util	: highest utilization among CPUs of the domain
  * @sum_util	: sum of the utilization of all CPUs in the domain
  * @allowed_cpu_cap	: maximum allowed CPU capacity for the @pd, which
-			  might reflect reduced frequency (due to thermal)
+ *			  might reflect reduced frequency (due to thermal)
  *
  * This function must be used only for CPU devices. There is no validation,
  * i.e. if the EM is a CPU type and has cpumask allocated. It is called from
diff --git a/include/linux/entry-kvm.h b/include/linux/entry-kvm.h
index 136b8d97d8c0..0d7865a0731c 100644
--- a/include/linux/entry-kvm.h
+++ b/include/linux/entry-kvm.h
@@ -2,7 +2,11 @@
 #ifndef __LINUX_ENTRYKVM_H
 #define __LINUX_ENTRYKVM_H
 
-#include <linux/entry-common.h>
+#include <linux/static_call_types.h>
+#include <linux/tracehook.h>
+#include <linux/syscalls.h>
+#include <linux/seccomp.h>
+#include <linux/sched.h>
 #include <linux/tick.h>
 
 /* Transfer to guest mode work */
diff --git a/include/linux/etherdevice.h b/include/linux/etherdevice.h
index 330345b1be54..928c411bd509 100644
--- a/include/linux/etherdevice.h
+++ b/include/linux/etherdevice.h
@@ -300,6 +300,18 @@ static inline void ether_addr_copy(u8 *dst, const u8 *src)
 }
 
 /**
+ * eth_hw_addr_set - Assign Ethernet address to a net_device
+ * @dev: pointer to net_device structure
+ * @addr: address to assign
+ *
+ * Assign given address to the net_device, addr_assign_type is not changed.
+ */
+static inline void eth_hw_addr_set(struct net_device *dev, const u8 *addr)
+{
+	ether_addr_copy(dev->dev_addr, addr);
+}
+
+/**
  * eth_hw_addr_inherit - Copy dev_addr from another net_device
  * @dst: pointer to net_device to copy dev_addr to
  * @src: pointer to net_device to copy dev_addr from
diff --git a/include/linux/eventpoll.h b/include/linux/eventpoll.h
index 593322c946e6..3337745d81bd 100644
--- a/include/linux/eventpoll.h
+++ b/include/linux/eventpoll.h
@@ -68,4 +68,22 @@ static inline void eventpoll_release(struct file *file) {}
 
 #endif
 
+#if defined(CONFIG_ARM) && defined(CONFIG_OABI_COMPAT)
+/* ARM OABI has an incompatible struct layout and needs a special handler */
+extern struct epoll_event __user *
+epoll_put_uevent(__poll_t revents, __u64 data,
+		 struct epoll_event __user *uevent);
+#else
+static inline struct epoll_event __user *
+epoll_put_uevent(__poll_t revents, __u64 data,
+		 struct epoll_event __user *uevent)
+{
+	if (__put_user(revents, &uevent->events) ||
+	    __put_user(data, &uevent->data))
+		return NULL;
+
+	return uevent+1;
+}
+#endif
+
 #endif /* #ifndef _LINUX_EVENTPOLL_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 37ad9a730a89..e7a633353fd2 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -3439,6 +3439,8 @@ extern int buffer_migrate_page_norefs(struct address_space *,
 #define buffer_migrate_page_norefs NULL
 #endif
 
+int may_setattr(struct user_namespace *mnt_userns, struct inode *inode,
+		unsigned int ia_valid);
 int setattr_prepare(struct user_namespace *, struct dentry *, struct iattr *);
 extern int inode_newsize_ok(const struct inode *, loff_t offset);
 void setattr_copy(struct user_namespace *, struct inode *inode,
@@ -3592,7 +3594,7 @@ int proc_nr_dentry(struct ctl_table *table, int write,
 		  void *buffer, size_t *lenp, loff_t *ppos);
 int proc_nr_inodes(struct ctl_table *table, int write,
 		   void *buffer, size_t *lenp, loff_t *ppos);
-int __init get_filesystem_list(char *buf);
+int __init list_bdev_fs_names(char *buf, size_t size);
 
 #define __FMODE_EXEC		((__force int) FMODE_EXEC)
 #define __FMODE_NONOTIFY	((__force int) FMODE_NONOTIFY)
diff --git a/include/linux/gpio/consumer.h b/include/linux/gpio/consumer.h
index 566feb56601f..97a28ad3393b 100644
--- a/include/linux/gpio/consumer.h
+++ b/include/linux/gpio/consumer.h
@@ -609,7 +609,7 @@ struct gpio_desc *devm_fwnode_get_gpiod_from_child(struct device *dev,
 #if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_OF_GPIO)
 struct device_node;
 
-struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
 					 const char *propname, int index,
 					 enum gpiod_flags dflags,
 					 const char *label);
@@ -619,7 +619,7 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 struct device_node;
 
 static inline
-struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
+struct gpio_desc *gpiod_get_from_of_node(const struct device_node *node,
 					 const char *propname, int index,
 					 enum gpiod_flags dflags,
 					 const char *label)
@@ -633,7 +633,7 @@ struct gpio_desc *gpiod_get_from_of_node(struct device_node *node,
 struct device_node;
 
 struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
-					      struct device_node *node,
+					      const struct device_node *node,
 					      const char *propname, int index,
 					      enum gpiod_flags dflags,
 					      const char *label);
@@ -644,7 +644,7 @@ struct device_node;
 
 static inline
 struct gpio_desc *devm_gpiod_get_from_of_node(struct device *dev,
-					      struct device_node *node,
+					      const struct device_node *node,
 					      const char *propname, int index,
 					      enum gpiod_flags dflags,
 					      const char *label)
@@ -680,10 +680,10 @@ struct acpi_gpio_mapping {
 	unsigned int quirks;
 };
 
-#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_ACPI)
-
 struct acpi_device;
 
+#if IS_ENABLED(CONFIG_GPIOLIB) && IS_ENABLED(CONFIG_ACPI)
+
 int acpi_dev_add_driver_gpios(struct acpi_device *adev,
 			      const struct acpi_gpio_mapping *gpios);
 void acpi_dev_remove_driver_gpios(struct acpi_device *adev);
@@ -696,8 +696,6 @@ struct gpio_desc *acpi_get_and_request_gpiod(char *path, int pin, char *label);
 
 #else  /* CONFIG_GPIOLIB && CONFIG_ACPI */
 
-struct acpi_device;
-
 static inline int acpi_dev_add_driver_gpios(struct acpi_device *adev,
 			      const struct acpi_gpio_mapping *gpios)
 {
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 3a268781fcec..a0f9901dcae6 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -312,6 +312,9 @@ struct gpio_irq_chip {
  *	get rid of the static GPIO number space in the long run.
  * @ngpio: the number of GPIOs handled by this controller; the last GPIO
  *	handled is (base + ngpio - 1).
+ * @offset: when multiple gpio chips belong to the same device this
+ *	can be used as offset within the device so friendly names can
+ *	be properly assigned.
  * @names: if set, must be an array of strings to use as alternative
  *      names for the GPIOs in this chip. Any entry in the array
  *      may be NULL if there is no alias for the GPIO, however the
@@ -398,6 +401,7 @@ struct gpio_chip {
 
 	int			base;
 	u16			ngpio;
+	u16			offset;
 	const char		*const *names;
 	bool			can_sleep;
 
diff --git a/include/linux/highmem-internal.h b/include/linux/highmem-internal.h
index 7902c7d8b55f..4aa1031d3e4c 100644
--- a/include/linux/highmem-internal.h
+++ b/include/linux/highmem-internal.h
@@ -90,7 +90,11 @@ static inline void __kunmap_local(void *vaddr)
 
 static inline void *kmap_atomic_prot(struct page *page, pgprot_t prot)
 {
-	preempt_disable();
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		migrate_disable();
+	else
+		preempt_disable();
+
 	pagefault_disable();
 	return __kmap_local_page_prot(page, prot);
 }
@@ -102,7 +106,11 @@ static inline void *kmap_atomic(struct page *page)
 
 static inline void *kmap_atomic_pfn(unsigned long pfn)
 {
-	preempt_disable();
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		migrate_disable();
+	else
+		preempt_disable();
+
 	pagefault_disable();
 	return __kmap_local_pfn_prot(pfn, kmap_prot);
 }
@@ -111,7 +119,10 @@ static inline void __kunmap_atomic(void *addr)
 {
 	kunmap_local_indexed(addr);
 	pagefault_enable();
-	preempt_enable();
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		migrate_enable();
+	else
+		preempt_enable();
 }
 
 unsigned int __nr_free_highpages(void);
@@ -179,7 +190,10 @@ static inline void __kunmap_local(void *addr)
 
 static inline void *kmap_atomic(struct page *page)
 {
-	preempt_disable();
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		migrate_disable();
+	else
+		preempt_disable();
 	pagefault_disable();
 	return page_address(page);
 }
@@ -200,7 +214,10 @@ static inline void __kunmap_atomic(void *addr)
 	kunmap_flush_on_unmap(addr);
 #endif
 	pagefault_enable();
-	preempt_enable();
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		migrate_enable();
+	else
+		preempt_enable();
 }
 
 static inline unsigned int nr_free_highpages(void) { return 0; }
diff --git a/include/linux/hugetlb.h b/include/linux/hugetlb.h
index f7ca1a3870ea..1faebe1cd0ed 100644
--- a/include/linux/hugetlb.h
+++ b/include/linux/hugetlb.h
@@ -858,6 +858,11 @@ static inline spinlock_t *huge_pte_lockptr(struct hstate *h,
 
 void hugetlb_report_usage(struct seq_file *m, struct mm_struct *mm);
 
+static inline void hugetlb_count_init(struct mm_struct *mm)
+{
+	atomic_long_set(&mm->hugetlb_usage, 0);
+}
+
 static inline void hugetlb_count_add(long l, struct mm_struct *mm)
 {
 	atomic_long_add(l, &mm->hugetlb_usage);
@@ -1042,6 +1047,10 @@ static inline spinlock_t *huge_pte_lockptr(struct hstate *h,
 	return &mm->page_table_lock;
 }
 
+static inline void hugetlb_count_init(struct mm_struct *mm)
+{
+}
+
 static inline void hugetlb_report_usage(struct seq_file *f, struct mm_struct *m)
 {
 }
diff --git a/include/linux/kdb.h b/include/linux/kdb.h
index 0125a677b67f..ea0f5e580fac 100644
--- a/include/linux/kdb.h
+++ b/include/linux/kdb.h
@@ -13,6 +13,8 @@
  * Copyright (C) 2009 Jason Wessel <jason.wessel@windriver.com>
  */
 
+#include <linux/list.h>
+
 /* Shifted versions of the command enable bits are be used if the command
  * has no arguments (see kdb_check_flags). This allows commands, such as
  * go, to have different permissions depending upon whether it is called
@@ -64,6 +66,17 @@ typedef enum {
 
 typedef int (*kdb_func_t)(int, const char **);
 
+/* The KDB shell command table */
+typedef struct _kdbtab {
+	char    *name;			/* Command name */
+	kdb_func_t func;		/* Function to execute command */
+	char    *usage;			/* Usage String for this command */
+	char    *help;			/* Help message for this command */
+	short    minlen;		/* Minimum legal # cmd chars required */
+	kdb_cmdflags_t flags;		/* Command behaviour flags */
+	struct list_head list_node;	/* Command list */
+} kdbtab_t;
+
 #ifdef	CONFIG_KGDB_KDB
 #include <linux/init.h>
 #include <linux/sched.h>
@@ -193,19 +206,13 @@ static inline const char *kdb_walk_kallsyms(loff_t *pos)
 #endif /* ! CONFIG_KALLSYMS */
 
 /* Dynamic kdb shell command registration */
-extern int kdb_register(char *, kdb_func_t, char *, char *, short);
-extern int kdb_register_flags(char *, kdb_func_t, char *, char *,
-			      short, kdb_cmdflags_t);
-extern int kdb_unregister(char *);
+extern int kdb_register(kdbtab_t *cmd);
+extern void kdb_unregister(kdbtab_t *cmd);
 #else /* ! CONFIG_KGDB_KDB */
 static inline __printf(1, 2) int kdb_printf(const char *fmt, ...) { return 0; }
 static inline void kdb_init(int level) {}
-static inline int kdb_register(char *cmd, kdb_func_t func, char *usage,
-			       char *help, short minlen) { return 0; }
-static inline int kdb_register_flags(char *cmd, kdb_func_t func, char *usage,
-				     char *help, short minlen,
-				     kdb_cmdflags_t flags) { return 0; }
-static inline int kdb_unregister(char *cmd) { return 0; }
+static inline int kdb_register(kdbtab_t *cmd) { return 0; }
+static inline void kdb_unregister(kdbtab_t *cmd) {}
 #endif	/* CONFIG_KGDB_KDB */
 enum {
 	KDB_NOT_INITIALIZED,
diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h
index ae7735b490b4..041ca7f15ea4 100644
--- a/include/linux/kvm_host.h
+++ b/include/linux/kvm_host.h
@@ -150,6 +150,7 @@ static inline bool is_error_page(struct page *page)
 #define KVM_REQ_MMU_RELOAD        (1 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQ_UNBLOCK           2
 #define KVM_REQ_UNHALT            3
+#define KVM_REQ_VM_BUGGED         (4 | KVM_REQUEST_WAIT | KVM_REQUEST_NO_WAKEUP)
 #define KVM_REQUEST_ARCH_BASE     8
 
 #define KVM_ARCH_REQ_FLAGS(nr, flags) ({ \
@@ -158,6 +159,15 @@ static inline bool is_error_page(struct page *page)
 })
 #define KVM_ARCH_REQ(nr)           KVM_ARCH_REQ_FLAGS(nr, 0)
 
+bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req,
+				 struct kvm_vcpu *except,
+				 unsigned long *vcpu_bitmap, cpumask_var_t tmp);
+bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req);
+bool kvm_make_all_cpus_request_except(struct kvm *kvm, unsigned int req,
+				      struct kvm_vcpu *except);
+bool kvm_make_cpus_request_mask(struct kvm *kvm, unsigned int req,
+				unsigned long *vcpu_bitmap);
+
 #define KVM_USERSPACE_IRQ_SOURCE_ID		0
 #define KVM_IRQFD_RESAMPLE_IRQ_SOURCE_ID	1
 
@@ -344,6 +354,13 @@ struct kvm_vcpu {
 	struct kvm_vcpu_stat stat;
 	char stats_id[KVM_STATS_NAME_SIZE];
 	struct kvm_dirty_ring dirty_ring;
+
+	/*
+	 * The index of the most recently used memslot by this vCPU. It's ok
+	 * if this becomes stale due to memslot changes since we always check
+	 * it is a valid slot.
+	 */
+	int last_used_slot;
 };
 
 /* must be called with irqs disabled */
@@ -512,7 +529,7 @@ struct kvm_memslots {
 	u64 generation;
 	/* The mapping table from slot id to the index in memslots[]. */
 	short id_to_index[KVM_MEM_SLOTS_NUM];
-	atomic_t lru_slot;
+	atomic_t last_used_slot;
 	int used_slots;
 	struct kvm_memory_slot memslots[];
 };
@@ -538,6 +555,11 @@ struct kvm {
 	struct kvm_memslots __rcu *memslots[KVM_ADDRESS_SPACE_NUM];
 	struct kvm_vcpu *vcpus[KVM_MAX_VCPUS];
 
+	/* Used to wait for completion of MMU notifiers.  */
+	spinlock_t mn_invalidate_lock;
+	unsigned long mn_active_invalidate_count;
+	struct rcuwait mn_memslots_update_rcuwait;
+
 	/*
 	 * created_vcpus is protected by kvm->lock, and is incremented
 	 * at the beginning of KVM_CREATE_VCPU.  online_vcpus is only
@@ -596,6 +618,7 @@ struct kvm {
 	pid_t userspace_pid;
 	unsigned int max_halt_poll_ns;
 	u32 dirty_ring_size;
+	bool vm_bugged;
 
 #ifdef CONFIG_HAVE_KVM_PM_NOTIFIER
 	struct notifier_block pm_notifier;
@@ -629,6 +652,30 @@ struct kvm {
 #define vcpu_err(vcpu, fmt, ...)					\
 	kvm_err("vcpu%i " fmt, (vcpu)->vcpu_id, ## __VA_ARGS__)
 
+static inline void kvm_vm_bugged(struct kvm *kvm)
+{
+	kvm->vm_bugged = true;
+	kvm_make_all_cpus_request(kvm, KVM_REQ_VM_BUGGED);
+}
+
+#define KVM_BUG(cond, kvm, fmt...)				\
+({								\
+	int __ret = (cond);					\
+								\
+	if (WARN_ONCE(__ret && !(kvm)->vm_bugged, fmt))		\
+		kvm_vm_bugged(kvm);				\
+	unlikely(__ret);					\
+})
+
+#define KVM_BUG_ON(cond, kvm)					\
+({								\
+	int __ret = (cond);					\
+								\
+	if (WARN_ON_ONCE(__ret && !(kvm)->vm_bugged))		\
+		kvm_vm_bugged(kvm);				\
+	unlikely(__ret);					\
+})
+
 static inline bool kvm_dirty_log_manual_protect_and_init_set(struct kvm *kvm)
 {
 	return !!(kvm->manual_dirty_log_protect & KVM_DIRTY_LOG_INITIALLY_SET);
@@ -720,6 +767,7 @@ int kvm_init(void *opaque, unsigned vcpu_size, unsigned vcpu_align,
 void kvm_exit(void);
 
 void kvm_get_kvm(struct kvm *kvm);
+bool kvm_get_kvm_safe(struct kvm *kvm);
 void kvm_put_kvm(struct kvm *kvm);
 bool file_is_kvm(struct file *file);
 void kvm_put_kvm_no_destroy(struct kvm *kvm);
@@ -824,7 +872,6 @@ void kvm_release_pfn_clean(kvm_pfn_t pfn);
 void kvm_release_pfn_dirty(kvm_pfn_t pfn);
 void kvm_set_pfn_dirty(kvm_pfn_t pfn);
 void kvm_set_pfn_accessed(kvm_pfn_t pfn);
-void kvm_get_pfn(kvm_pfn_t pfn);
 
 void kvm_release_pfn(kvm_pfn_t pfn, bool dirty, struct gfn_to_pfn_cache *cache);
 int kvm_read_guest_page(struct kvm *kvm, gfn_t gfn, void *data, int offset,
@@ -943,14 +990,10 @@ void kvm_mmu_free_memory_cache(struct kvm_mmu_memory_cache *mc);
 void *kvm_mmu_memory_cache_alloc(struct kvm_mmu_memory_cache *mc);
 #endif
 
-bool kvm_make_vcpus_request_mask(struct kvm *kvm, unsigned int req,
-				 struct kvm_vcpu *except,
-				 unsigned long *vcpu_bitmap, cpumask_var_t tmp);
-bool kvm_make_all_cpus_request(struct kvm *kvm, unsigned int req);
-bool kvm_make_all_cpus_request_except(struct kvm *kvm, unsigned int req,
-				      struct kvm_vcpu *except);
-bool kvm_make_cpus_request_mask(struct kvm *kvm, unsigned int req,
-				unsigned long *vcpu_bitmap);
+void kvm_inc_notifier_count(struct kvm *kvm, unsigned long start,
+				   unsigned long end);
+void kvm_dec_notifier_count(struct kvm *kvm, unsigned long start,
+				   unsigned long end);
 
 long kvm_arch_dev_ioctl(struct file *filp,
 			unsigned int ioctl, unsigned long arg);
@@ -1034,6 +1077,7 @@ bool kvm_arch_dy_runnable(struct kvm_vcpu *vcpu);
 bool kvm_arch_dy_has_pending_interrupt(struct kvm_vcpu *vcpu);
 int kvm_arch_post_init_vm(struct kvm *kvm);
 void kvm_arch_pre_destroy_vm(struct kvm *kvm);
+int kvm_arch_create_vm_debugfs(struct kvm *kvm);
 
 #ifndef __KVM_HAVE_ARCH_VM_ALLOC
 /*
@@ -1157,29 +1201,49 @@ void kvm_free_irq_source_id(struct kvm *kvm, int irq_source_id);
 bool kvm_arch_irqfd_allowed(struct kvm *kvm, struct kvm_irqfd *args);
 
 /*
- * search_memslots() and __gfn_to_memslot() are here because they are
- * used in non-modular code in arch/powerpc/kvm/book3s_hv_rm_mmu.c.
- * gfn_to_memslot() itself isn't here as an inline because that would
- * bloat other code too much.
+ * Returns a pointer to the memslot at slot_index if it contains gfn.
+ * Otherwise returns NULL.
+ */
+static inline struct kvm_memory_slot *
+try_get_memslot(struct kvm_memslots *slots, int slot_index, gfn_t gfn)
+{
+	struct kvm_memory_slot *slot;
+
+	if (slot_index < 0 || slot_index >= slots->used_slots)
+		return NULL;
+
+	/*
+	 * slot_index can come from vcpu->last_used_slot which is not kept
+	 * in sync with userspace-controllable memslot deletion. So use nospec
+	 * to prevent the CPU from speculating past the end of memslots[].
+	 */
+	slot_index = array_index_nospec(slot_index, slots->used_slots);
+	slot = &slots->memslots[slot_index];
+
+	if (gfn >= slot->base_gfn && gfn < slot->base_gfn + slot->npages)
+		return slot;
+	else
+		return NULL;
+}
+
+/*
+ * Returns a pointer to the memslot that contains gfn and records the index of
+ * the slot in index. Otherwise returns NULL.
  *
  * IMPORTANT: Slots are sorted from highest GFN to lowest GFN!
  */
 static inline struct kvm_memory_slot *
-search_memslots(struct kvm_memslots *slots, gfn_t gfn)
+search_memslots(struct kvm_memslots *slots, gfn_t gfn, int *index)
 {
 	int start = 0, end = slots->used_slots;
-	int slot = atomic_read(&slots->lru_slot);
 	struct kvm_memory_slot *memslots = slots->memslots;
+	struct kvm_memory_slot *slot;
 
 	if (unlikely(!slots->used_slots))
 		return NULL;
 
-	if (gfn >= memslots[slot].base_gfn &&
-	    gfn < memslots[slot].base_gfn + memslots[slot].npages)
-		return &memslots[slot];
-
 	while (start < end) {
-		slot = start + (end - start) / 2;
+		int slot = start + (end - start) / 2;
 
 		if (gfn >= memslots[slot].base_gfn)
 			end = slot;
@@ -1187,19 +1251,37 @@ search_memslots(struct kvm_memslots *slots, gfn_t gfn)
 			start = slot + 1;
 	}
 
-	if (start < slots->used_slots && gfn >= memslots[start].base_gfn &&
-	    gfn < memslots[start].base_gfn + memslots[start].npages) {
-		atomic_set(&slots->lru_slot, start);
-		return &memslots[start];
+	slot = try_get_memslot(slots, start, gfn);
+	if (slot) {
+		*index = start;
+		return slot;
 	}
 
 	return NULL;
 }
 
+/*
+ * __gfn_to_memslot() and its descendants are here because it is called from
+ * non-modular code in arch/powerpc/kvm/book3s_64_vio{,_hv}.c. gfn_to_memslot()
+ * itself isn't here as an inline because that would bloat other code too much.
+ */
 static inline struct kvm_memory_slot *
 __gfn_to_memslot(struct kvm_memslots *slots, gfn_t gfn)
 {
-	return search_memslots(slots, gfn);
+	struct kvm_memory_slot *slot;
+	int slot_index = atomic_read(&slots->last_used_slot);
+
+	slot = try_get_memslot(slots, slot_index, gfn);
+	if (slot)
+		return slot;
+
+	slot = search_memslots(slots, gfn, &slot_index);
+	if (slot) {
+		atomic_set(&slots->last_used_slot, slot_index);
+		return slot;
+	}
+
+	return NULL;
 }
 
 static inline unsigned long
@@ -1273,56 +1355,66 @@ struct _kvm_stats_desc {
 	char name[KVM_STATS_NAME_SIZE];
 };
 
-#define STATS_DESC_COMMON(type, unit, base, exp)			       \
+#define STATS_DESC_COMMON(type, unit, base, exp, sz, bsz)		       \
 	.flags = type | unit | base |					       \
 		 BUILD_BUG_ON_ZERO(type & ~KVM_STATS_TYPE_MASK) |	       \
 		 BUILD_BUG_ON_ZERO(unit & ~KVM_STATS_UNIT_MASK) |	       \
 		 BUILD_BUG_ON_ZERO(base & ~KVM_STATS_BASE_MASK),	       \
 	.exponent = exp,						       \
-	.size = 1
+	.size = sz,							       \
+	.bucket_size = bsz
 
-#define VM_GENERIC_STATS_DESC(stat, type, unit, base, exp)		       \
+#define VM_GENERIC_STATS_DESC(stat, type, unit, base, exp, sz, bsz)	       \
 	{								       \
 		{							       \
-			STATS_DESC_COMMON(type, unit, base, exp),	       \
+			STATS_DESC_COMMON(type, unit, base, exp, sz, bsz),     \
 			.offset = offsetof(struct kvm_vm_stat, generic.stat)   \
 		},							       \
 		.name = #stat,						       \
 	}
-#define VCPU_GENERIC_STATS_DESC(stat, type, unit, base, exp)		       \
+#define VCPU_GENERIC_STATS_DESC(stat, type, unit, base, exp, sz, bsz)	       \
 	{								       \
 		{							       \
-			STATS_DESC_COMMON(type, unit, base, exp),	       \
+			STATS_DESC_COMMON(type, unit, base, exp, sz, bsz),     \
 			.offset = offsetof(struct kvm_vcpu_stat, generic.stat) \
 		},							       \
 		.name = #stat,						       \
 	}
-#define VM_STATS_DESC(stat, type, unit, base, exp)			       \
+#define VM_STATS_DESC(stat, type, unit, base, exp, sz, bsz)		       \
 	{								       \
 		{							       \
-			STATS_DESC_COMMON(type, unit, base, exp),	       \
+			STATS_DESC_COMMON(type, unit, base, exp, sz, bsz),     \
 			.offset = offsetof(struct kvm_vm_stat, stat)	       \
 		},							       \
 		.name = #stat,						       \
 	}
-#define VCPU_STATS_DESC(stat, type, unit, base, exp)			       \
+#define VCPU_STATS_DESC(stat, type, unit, base, exp, sz, bsz)		       \
 	{								       \
 		{							       \
-			STATS_DESC_COMMON(type, unit, base, exp),	       \
+			STATS_DESC_COMMON(type, unit, base, exp, sz, bsz),     \
 			.offset = offsetof(struct kvm_vcpu_stat, stat)	       \
 		},							       \
 		.name = #stat,						       \
 	}
 /* SCOPE: VM, VM_GENERIC, VCPU, VCPU_GENERIC */
-#define STATS_DESC(SCOPE, stat, type, unit, base, exp)			       \
-	SCOPE##_STATS_DESC(stat, type, unit, base, exp)
+#define STATS_DESC(SCOPE, stat, type, unit, base, exp, sz, bsz)		       \
+	SCOPE##_STATS_DESC(stat, type, unit, base, exp, sz, bsz)
 
 #define STATS_DESC_CUMULATIVE(SCOPE, name, unit, base, exponent)	       \
-	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_CUMULATIVE, unit, base, exponent)
+	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_CUMULATIVE,		       \
+		unit, base, exponent, 1, 0)
 #define STATS_DESC_INSTANT(SCOPE, name, unit, base, exponent)		       \
-	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_INSTANT, unit, base, exponent)
+	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_INSTANT,			       \
+		unit, base, exponent, 1, 0)
 #define STATS_DESC_PEAK(SCOPE, name, unit, base, exponent)		       \
-	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_PEAK, unit, base, exponent)
+	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_PEAK,			       \
+		unit, base, exponent, 1, 0)
+#define STATS_DESC_LINEAR_HIST(SCOPE, name, unit, base, exponent, sz, bsz)     \
+	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_LINEAR_HIST,		       \
+		unit, base, exponent, sz, bsz)
+#define STATS_DESC_LOG_HIST(SCOPE, name, unit, base, exponent, sz)	       \
+	STATS_DESC(SCOPE, name, KVM_STATS_TYPE_LOG_HIST,		       \
+		unit, base, exponent, sz, 0)
 
 /* Cumulative counter, read/write */
 #define STATS_DESC_COUNTER(SCOPE, name)					       \
@@ -1341,9 +1433,18 @@ struct _kvm_stats_desc {
 #define STATS_DESC_TIME_NSEC(SCOPE, name)				       \
 	STATS_DESC_CUMULATIVE(SCOPE, name, KVM_STATS_UNIT_SECONDS,	       \
 		KVM_STATS_BASE_POW10, -9)
+/* Linear histogram for time in nanosecond */
+#define STATS_DESC_LINHIST_TIME_NSEC(SCOPE, name, sz, bsz)		       \
+	STATS_DESC_LINEAR_HIST(SCOPE, name, KVM_STATS_UNIT_SECONDS,	       \
+		KVM_STATS_BASE_POW10, -9, sz, bsz)
+/* Logarithmic histogram for time in nanosecond */
+#define STATS_DESC_LOGHIST_TIME_NSEC(SCOPE, name, sz)			       \
+	STATS_DESC_LOG_HIST(SCOPE, name, KVM_STATS_UNIT_SECONDS,	       \
+		KVM_STATS_BASE_POW10, -9, sz)
 
 #define KVM_GENERIC_VM_STATS()						       \
-	STATS_DESC_COUNTER(VM_GENERIC, remote_tlb_flush)
+	STATS_DESC_COUNTER(VM_GENERIC, remote_tlb_flush),		       \
+	STATS_DESC_COUNTER(VM_GENERIC, remote_tlb_flush_requests)
 
 #define KVM_GENERIC_VCPU_STATS()					       \
 	STATS_DESC_COUNTER(VCPU_GENERIC, halt_successful_poll),		       \
@@ -1351,13 +1452,62 @@ struct _kvm_stats_desc {
 	STATS_DESC_COUNTER(VCPU_GENERIC, halt_poll_invalid),		       \
 	STATS_DESC_COUNTER(VCPU_GENERIC, halt_wakeup),			       \
 	STATS_DESC_TIME_NSEC(VCPU_GENERIC, halt_poll_success_ns),	       \
-	STATS_DESC_TIME_NSEC(VCPU_GENERIC, halt_poll_fail_ns)
+	STATS_DESC_TIME_NSEC(VCPU_GENERIC, halt_poll_fail_ns),		       \
+	STATS_DESC_TIME_NSEC(VCPU_GENERIC, halt_wait_ns),		       \
+	STATS_DESC_LOGHIST_TIME_NSEC(VCPU_GENERIC, halt_poll_success_hist,     \
+			HALT_POLL_HIST_COUNT),				       \
+	STATS_DESC_LOGHIST_TIME_NSEC(VCPU_GENERIC, halt_poll_fail_hist,	       \
+			HALT_POLL_HIST_COUNT),				       \
+	STATS_DESC_LOGHIST_TIME_NSEC(VCPU_GENERIC, halt_wait_hist,	       \
+			HALT_POLL_HIST_COUNT)
 
 extern struct dentry *kvm_debugfs_dir;
+
 ssize_t kvm_stats_read(char *id, const struct kvm_stats_header *header,
 		       const struct _kvm_stats_desc *desc,
 		       void *stats, size_t size_stats,
 		       char __user *user_buffer, size_t size, loff_t *offset);
+
+/**
+ * kvm_stats_linear_hist_update() - Update bucket value for linear histogram
+ * statistics data.
+ *
+ * @data: start address of the stats data
+ * @size: the number of bucket of the stats data
+ * @value: the new value used to update the linear histogram's bucket
+ * @bucket_size: the size (width) of a bucket
+ */
+static inline void kvm_stats_linear_hist_update(u64 *data, size_t size,
+						u64 value, size_t bucket_size)
+{
+	size_t index = div64_u64(value, bucket_size);
+
+	index = min(index, size - 1);
+	++data[index];
+}
+
+/**
+ * kvm_stats_log_hist_update() - Update bucket value for logarithmic histogram
+ * statistics data.
+ *
+ * @data: start address of the stats data
+ * @size: the number of bucket of the stats data
+ * @value: the new value used to update the logarithmic histogram's bucket
+ */
+static inline void kvm_stats_log_hist_update(u64 *data, size_t size, u64 value)
+{
+	size_t index = fls64(value);
+
+	index = min(index, size - 1);
+	++data[index];
+}
+
+#define KVM_STATS_LINEAR_HIST_UPDATE(array, value, bsize)		       \
+	kvm_stats_linear_hist_update(array, ARRAY_SIZE(array), value, bsize)
+#define KVM_STATS_LOG_HIST_UPDATE(array, value)				       \
+	kvm_stats_log_hist_update(array, ARRAY_SIZE(array), value)
+
+
 extern const struct kvm_stats_header kvm_vm_stats_header;
 extern const struct _kvm_stats_desc kvm_vm_stats_desc[];
 extern const struct kvm_stats_header kvm_vcpu_stats_header;
diff --git a/include/linux/kvm_types.h b/include/linux/kvm_types.h
index ed6a985c5680..2237abb93ccd 100644
--- a/include/linux/kvm_types.h
+++ b/include/linux/kvm_types.h
@@ -76,8 +76,11 @@ struct kvm_mmu_memory_cache {
 };
 #endif
 
+#define HALT_POLL_HIST_COUNT			32
+
 struct kvm_vm_stat_generic {
 	u64 remote_tlb_flush;
+	u64 remote_tlb_flush_requests;
 };
 
 struct kvm_vcpu_stat_generic {
@@ -87,6 +90,10 @@ struct kvm_vcpu_stat_generic {
 	u64 halt_wakeup;
 	u64 halt_poll_success_ns;
 	u64 halt_poll_fail_ns;
+	u64 halt_wait_ns;
+	u64 halt_poll_success_hist[HALT_POLL_HIST_COUNT];
+	u64 halt_poll_fail_hist[HALT_POLL_HIST_COUNT];
+	u64 halt_wait_hist[HALT_POLL_HIST_COUNT];
 };
 
 #define KVM_STATS_NAME_SIZE	48
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 860e63f5667b..c0c64f03e107 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -426,6 +426,7 @@ enum {
 	ATA_HORKAGE_NOTRIM	= (1 << 24),	/* don't use TRIM */
 	ATA_HORKAGE_MAX_SEC_1024 = (1 << 25),	/* Limit max sects to 1024 */
 	ATA_HORKAGE_MAX_TRIM_128M = (1 << 26),	/* Limit max trim size to 128M */
+	ATA_HORKAGE_NO_NCQ_ON_ATI = (1 << 27),	/* Disable NCQ on ATI chipset */
 
 	 /* DMA mask for user DMA control: User visible values; DO NOT
 	    renumber */
diff --git a/include/linux/memory.h b/include/linux/memory.h
index d9a0b61cd432..7efc0a7c14c9 100644
--- a/include/linux/memory.h
+++ b/include/linux/memory.h
@@ -23,6 +23,48 @@
 
 #define MIN_MEMORY_BLOCK_SIZE     (1UL << SECTION_SIZE_BITS)
 
+/**
+ * struct memory_group - a logical group of memory blocks
+ * @nid: The node id for all memory blocks inside the memory group.
+ * @blocks: List of all memory blocks belonging to this memory group.
+ * @present_kernel_pages: Present (online) memory outside ZONE_MOVABLE of this
+ *			  memory group.
+ * @present_movable_pages: Present (online) memory in ZONE_MOVABLE of this
+ *			   memory group.
+ * @is_dynamic: The memory group type: static vs. dynamic
+ * @s.max_pages: Valid with &memory_group.is_dynamic == false. The maximum
+ *		 number of pages we'll have in this static memory group.
+ * @d.unit_pages: Valid with &memory_group.is_dynamic == true. Unit in pages
+ *		  in which memory is added/removed in this dynamic memory group.
+ *		  This granularity defines the alignment of a unit in physical
+ *		  address space; it has to be at least as big as a single
+ *		  memory block.
+ *
+ * A memory group logically groups memory blocks; each memory block
+ * belongs to at most one memory group. A memory group corresponds to
+ * a memory device, such as a DIMM or a NUMA node, which spans multiple
+ * memory blocks and might even span multiple non-contiguous physical memory
+ * ranges.
+ *
+ * Modification of members after registration is serialized by memory
+ * hot(un)plug code.
+ */
+struct memory_group {
+	int nid;
+	struct list_head memory_blocks;
+	unsigned long present_kernel_pages;
+	unsigned long present_movable_pages;
+	bool is_dynamic;
+	union {
+		struct {
+			unsigned long max_pages;
+		} s;
+		struct {
+			unsigned long unit_pages;
+		} d;
+	};
+};
+
 struct memory_block {
 	unsigned long start_section_nr;
 	unsigned long state;		/* serialized by the dev->lock */
@@ -34,6 +76,8 @@ struct memory_block {
 	 * lay at the beginning of the memory block.
 	 */
 	unsigned long nr_vmemmap_pages;
+	struct memory_group *group;	/* group (if any) for this block */
+	struct list_head group_next;	/* next block inside memory group */
 };
 
 int arch_get_memory_phys_device(unsigned long start_pfn);
@@ -86,7 +130,8 @@ static inline int memory_notify(unsigned long val, void *v)
 extern int register_memory_notifier(struct notifier_block *nb);
 extern void unregister_memory_notifier(struct notifier_block *nb);
 int create_memory_block_devices(unsigned long start, unsigned long size,
-				unsigned long vmemmap_pages);
+				unsigned long vmemmap_pages,
+				struct memory_group *group);
 void remove_memory_block_devices(unsigned long start, unsigned long size);
 extern void memory_dev_init(void);
 extern int memory_notify(unsigned long val, void *v);
@@ -96,6 +141,14 @@ extern int walk_memory_blocks(unsigned long start, unsigned long size,
 			      void *arg, walk_memory_blocks_func_t func);
 extern int for_each_memory_block(void *arg, walk_memory_blocks_func_t func);
 #define CONFIG_MEM_BLOCK_SIZE	(PAGES_PER_SECTION<<PAGE_SHIFT)
+
+extern int memory_group_register_static(int nid, unsigned long max_pages);
+extern int memory_group_register_dynamic(int nid, unsigned long unit_pages);
+extern int memory_group_unregister(int mgid);
+struct memory_group *memory_group_find_by_id(int mgid);
+typedef int (*walk_memory_groups_func_t)(struct memory_group *, void *);
+int walk_dynamic_memory_groups(int nid, walk_memory_groups_func_t func,
+			       struct memory_group *excluded, void *arg);
 #endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
 
 #ifdef CONFIG_MEMORY_HOTPLUG
diff --git a/include/linux/memory_hotplug.h b/include/linux/memory_hotplug.h
index a7fd2c3ccb77..e5a867c950b2 100644
--- a/include/linux/memory_hotplug.h
+++ b/include/linux/memory_hotplug.h
@@ -12,6 +12,7 @@ struct zone;
 struct pglist_data;
 struct mem_section;
 struct memory_block;
+struct memory_group;
 struct resource;
 struct vmem_altmap;
 
@@ -50,6 +51,11 @@ typedef int __bitwise mhp_t;
  * Only selected architectures support it with SPARSE_VMEMMAP.
  */
 #define MHP_MEMMAP_ON_MEMORY   ((__force mhp_t)BIT(1))
+/*
+ * The nid field specifies a memory group id (mgid) instead. The memory group
+ * implies the node id (nid).
+ */
+#define MHP_NID_IS_MGID		((__force mhp_t)BIT(2))
 
 /*
  * Extended parameters for memory hotplug:
@@ -95,13 +101,15 @@ static inline void zone_seqlock_init(struct zone *zone)
 extern int zone_grow_free_lists(struct zone *zone, unsigned long new_nr_pages);
 extern int zone_grow_waitqueues(struct zone *zone, unsigned long nr_pages);
 extern int add_one_highpage(struct page *page, int pfn, int bad_ppro);
-extern void adjust_present_page_count(struct zone *zone, long nr_pages);
+extern void adjust_present_page_count(struct page *page,
+				      struct memory_group *group,
+				      long nr_pages);
 /* VM interface that may be used by firmware interface */
 extern int mhp_init_memmap_on_memory(unsigned long pfn, unsigned long nr_pages,
 				     struct zone *zone);
 extern void mhp_deinit_memmap_on_memory(unsigned long pfn, unsigned long nr_pages);
 extern int online_pages(unsigned long pfn, unsigned long nr_pages,
-			struct zone *zone);
+			struct zone *zone, struct memory_group *group);
 extern struct zone *test_pages_in_a_zone(unsigned long start_pfn,
 					 unsigned long end_pfn);
 extern void __offline_isolated_pages(unsigned long start_pfn,
@@ -130,8 +138,7 @@ static inline bool movable_node_is_enabled(void)
 	return movable_node_enabled;
 }
 
-extern void arch_remove_memory(int nid, u64 start, u64 size,
-			       struct vmem_altmap *altmap);
+extern void arch_remove_memory(u64 start, u64 size, struct vmem_altmap *altmap);
 extern void __remove_pages(unsigned long start_pfn, unsigned long nr_pages,
 			   struct vmem_altmap *altmap);
 
@@ -292,25 +299,27 @@ static inline void pgdat_resize_init(struct pglist_data *pgdat) {}
 #ifdef CONFIG_MEMORY_HOTREMOVE
 
 extern void try_offline_node(int nid);
-extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages);
-extern int remove_memory(int nid, u64 start, u64 size);
-extern void __remove_memory(int nid, u64 start, u64 size);
-extern int offline_and_remove_memory(int nid, u64 start, u64 size);
+extern int offline_pages(unsigned long start_pfn, unsigned long nr_pages,
+			 struct memory_group *group);
+extern int remove_memory(u64 start, u64 size);
+extern void __remove_memory(u64 start, u64 size);
+extern int offline_and_remove_memory(u64 start, u64 size);
 
 #else
 static inline void try_offline_node(int nid) {}
 
-static inline int offline_pages(unsigned long start_pfn, unsigned long nr_pages)
+static inline int offline_pages(unsigned long start_pfn, unsigned long nr_pages,
+				struct memory_group *group)
 {
 	return -EINVAL;
 }
 
-static inline int remove_memory(int nid, u64 start, u64 size)
+static inline int remove_memory(u64 start, u64 size)
 {
 	return -EBUSY;
 }
 
-static inline void __remove_memory(int nid, u64 start, u64 size) {}
+static inline void __remove_memory(u64 start, u64 size) {}
 #endif /* CONFIG_MEMORY_HOTREMOVE */
 
 extern void set_zone_contiguous(struct zone *zone);
@@ -339,7 +348,8 @@ extern void sparse_remove_section(struct mem_section *ms,
 		unsigned long map_offset, struct vmem_altmap *altmap);
 extern struct page *sparse_decode_mem_map(unsigned long coded_mem_map,
 					  unsigned long pnum);
-extern struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
+extern struct zone *zone_for_pfn_range(int online_type, int nid,
+		struct memory_group *group, unsigned long start_pfn,
 		unsigned long nr_pages);
 extern int arch_create_linear_mapping(int nid, u64 start, u64 size,
 				      struct mhp_params *params);
diff --git a/include/linux/mfd/dbx500-prcmu.h b/include/linux/mfd/dbx500-prcmu.h
index e6ee2ec35de9..cbf9d7619493 100644
--- a/include/linux/mfd/dbx500-prcmu.h
+++ b/include/linux/mfd/dbx500-prcmu.h
@@ -186,10 +186,11 @@ enum ddr_pwrst {
 #define PRCMU_FW_PROJECT_U8500_C3	8
 #define PRCMU_FW_PROJECT_U8500_C4	9
 #define PRCMU_FW_PROJECT_U9500_MBL	10
-#define PRCMU_FW_PROJECT_U8500_MBL	11 /* Customer specific */
+#define PRCMU_FW_PROJECT_U8500_SSG1	11 /* Samsung specific */
 #define PRCMU_FW_PROJECT_U8500_MBL2	12 /* Customer specific */
 #define PRCMU_FW_PROJECT_U8520		13
 #define PRCMU_FW_PROJECT_U8420		14
+#define PRCMU_FW_PROJECT_U8500_SSG2	15 /* Samsung specific */
 #define PRCMU_FW_PROJECT_U8420_SYSCLK	17
 #define PRCMU_FW_PROJECT_A9420		20
 /* [32..63] 9540 and derivatives */
diff --git a/include/linux/mfd/idt82p33_reg.h b/include/linux/mfd/idt82p33_reg.h
new file mode 100644
index 000000000000..129a6c078221
--- /dev/null
+++ b/include/linux/mfd/idt82p33_reg.h
@@ -0,0 +1,112 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Register Map - Based on AN888_SMUforIEEE_SynchEther_82P33xxx_RevH.pdf
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef HAVE_IDT82P33_REG
+#define HAVE_IDT82P33_REG
+
+/* Register address */
+#define DPLL1_TOD_CNFG 0x134
+#define DPLL2_TOD_CNFG 0x1B4
+
+#define DPLL1_TOD_STS 0x10B
+#define DPLL2_TOD_STS 0x18B
+
+#define DPLL1_TOD_TRIGGER 0x115
+#define DPLL2_TOD_TRIGGER 0x195
+
+#define DPLL1_OPERATING_MODE_CNFG 0x120
+#define DPLL2_OPERATING_MODE_CNFG 0x1A0
+
+#define DPLL1_HOLDOVER_FREQ_CNFG 0x12C
+#define DPLL2_HOLDOVER_FREQ_CNFG 0x1AC
+
+#define DPLL1_PHASE_OFFSET_CNFG 0x143
+#define DPLL2_PHASE_OFFSET_CNFG 0x1C3
+
+#define DPLL1_SYNC_EDGE_CNFG 0x140
+#define DPLL2_SYNC_EDGE_CNFG 0x1C0
+
+#define DPLL1_INPUT_MODE_CNFG 0x116
+#define DPLL2_INPUT_MODE_CNFG 0x196
+
+#define DPLL1_OPERATING_STS 0x102
+#define DPLL2_OPERATING_STS 0x182
+
+#define DPLL1_CURRENT_FREQ_STS 0x103
+#define DPLL2_CURRENT_FREQ_STS 0x183
+
+#define REG_SOFT_RESET 0X381
+
+#define OUT_MUX_CNFG(outn) REG_ADDR(0x6, (0xC * (outn)))
+
+/* Register bit definitions */
+#define SYNC_TOD BIT(1)
+#define PH_OFFSET_EN BIT(7)
+#define SQUELCH_ENABLE BIT(5)
+
+/* Bit definitions for the DPLL_MODE register */
+#define PLL_MODE_SHIFT		(0)
+#define PLL_MODE_MASK		(0x1F)
+#define COMBO_MODE_EN		BIT(5)
+#define COMBO_MODE_SHIFT	(6)
+#define COMBO_MODE_MASK		(0x3)
+
+/* Bit definitions for DPLL_OPERATING_STS register */
+#define OPERATING_STS_MASK	(0x7)
+#define OPERATING_STS_SHIFT	(0x0)
+
+/* Bit definitions for DPLL_TOD_TRIGGER register */
+#define READ_TRIGGER_MASK	(0xF)
+#define READ_TRIGGER_SHIFT	(0x0)
+#define WRITE_TRIGGER_MASK	(0xF0)
+#define WRITE_TRIGGER_SHIFT	(0x4)
+
+/* Bit definitions for REG_SOFT_RESET register */
+#define SOFT_RESET_EN		BIT(7)
+
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_AUTOMATIC = PLL_MODE_MIN,
+	PLL_MODE_FORCE_FREERUN = 1,
+	PLL_MODE_FORCE_HOLDOVER = 2,
+	PLL_MODE_FORCE_LOCKED = 4,
+	PLL_MODE_FORCE_PRE_LOCKED2 = 5,
+	PLL_MODE_FORCE_PRE_LOCKED = 6,
+	PLL_MODE_FORCE_LOST_PHASE = 7,
+	PLL_MODE_DCO = 10,
+	PLL_MODE_WPH = 18,
+	PLL_MODE_MAX = PLL_MODE_WPH,
+};
+
+enum hw_tod_trig_sel {
+	HW_TOD_TRIG_SEL_MIN = 0,
+	HW_TOD_TRIG_SEL_NO_WRITE = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_NO_READ = HW_TOD_TRIG_SEL_MIN,
+	HW_TOD_TRIG_SEL_SYNC_SEL = 1,
+	HW_TOD_TRIG_SEL_IN12 = 2,
+	HW_TOD_TRIG_SEL_IN13 = 3,
+	HW_TOD_TRIG_SEL_IN14 = 4,
+	HW_TOD_TRIG_SEL_TOD_PPS = 5,
+	HW_TOD_TRIG_SEL_TIMER_INTERVAL = 6,
+	HW_TOD_TRIG_SEL_MSB_PHASE_OFFSET_CNFG = 7,
+	HW_TOD_TRIG_SEL_MSB_HOLDOVER_FREQ_CNFG = 8,
+	HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG = 9,
+	HW_TOD_RD_TRIG_SEL_LSB_TOD_STS = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_MSB_TOD_CNFG,
+};
+
+/** @brief Enumerated type listing DPLL operational modes */
+enum dpll_state {
+	DPLL_STATE_FREERUN = 1,
+	DPLL_STATE_HOLDOVER = 2,
+	DPLL_STATE_LOCKED = 4,
+	DPLL_STATE_PRELOCKED2 = 5,
+	DPLL_STATE_PRELOCKED = 6,
+	DPLL_STATE_LOSTPHASE = 7,
+	DPLL_STATE_MAX
+};
+
+#endif
diff --git a/include/linux/mfd/idt8a340_reg.h b/include/linux/mfd/idt8a340_reg.h
new file mode 100644
index 000000000000..92d763230bdf
--- /dev/null
+++ b/include/linux/mfd/idt8a340_reg.h
@@ -0,0 +1,729 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Based on 5.2.0, Family Programming Guide (Sept 30, 2020)
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+#ifndef HAVE_IDT8A340_REG
+#define HAVE_IDT8A340_REG
+
+#define PAGE_ADDR_BASE                    0x0000
+#define PAGE_ADDR                         0x00fc
+
+#define HW_REVISION                       0x8180
+#define REV_ID                            0x007a
+
+#define HW_DPLL_0                         (0x8a00)
+#define HW_DPLL_1                         (0x8b00)
+#define HW_DPLL_2                         (0x8c00)
+#define HW_DPLL_3                         (0x8d00)
+#define HW_DPLL_4                         (0x8e00)
+#define HW_DPLL_5                         (0x8f00)
+#define HW_DPLL_6                         (0x9000)
+#define HW_DPLL_7                         (0x9100)
+
+#define HW_DPLL_TOD_SW_TRIG_ADDR__0       (0x080)
+#define HW_DPLL_TOD_CTRL_1                (0x089)
+#define HW_DPLL_TOD_CTRL_2                (0x08A)
+#define HW_DPLL_TOD_OVR__0                (0x098)
+#define HW_DPLL_TOD_OUT_0__0              (0x0B0)
+
+#define HW_Q0_Q1_CH_SYNC_CTRL_0           (0xa740)
+#define HW_Q0_Q1_CH_SYNC_CTRL_1           (0xa741)
+#define HW_Q2_Q3_CH_SYNC_CTRL_0           (0xa742)
+#define HW_Q2_Q3_CH_SYNC_CTRL_1           (0xa743)
+#define HW_Q4_Q5_CH_SYNC_CTRL_0           (0xa744)
+#define HW_Q4_Q5_CH_SYNC_CTRL_1           (0xa745)
+#define HW_Q6_Q7_CH_SYNC_CTRL_0           (0xa746)
+#define HW_Q6_Q7_CH_SYNC_CTRL_1           (0xa747)
+#define HW_Q8_CH_SYNC_CTRL_0              (0xa748)
+#define HW_Q8_CH_SYNC_CTRL_1              (0xa749)
+#define HW_Q9_CH_SYNC_CTRL_0              (0xa74a)
+#define HW_Q9_CH_SYNC_CTRL_1              (0xa74b)
+#define HW_Q10_CH_SYNC_CTRL_0             (0xa74c)
+#define HW_Q10_CH_SYNC_CTRL_1             (0xa74d)
+#define HW_Q11_CH_SYNC_CTRL_0             (0xa74e)
+#define HW_Q11_CH_SYNC_CTRL_1             (0xa74f)
+
+#define SYNC_SOURCE_DPLL0_TOD_PPS	0x14
+#define SYNC_SOURCE_DPLL1_TOD_PPS	0x15
+#define SYNC_SOURCE_DPLL2_TOD_PPS	0x16
+#define SYNC_SOURCE_DPLL3_TOD_PPS	0x17
+
+#define SYNCTRL1_MASTER_SYNC_RST	BIT(7)
+#define SYNCTRL1_MASTER_SYNC_TRIG	BIT(5)
+#define SYNCTRL1_TOD_SYNC_TRIG		BIT(4)
+#define SYNCTRL1_FBDIV_FRAME_SYNC_TRIG	BIT(3)
+#define SYNCTRL1_FBDIV_SYNC_TRIG	BIT(2)
+#define SYNCTRL1_Q1_DIV_SYNC_TRIG	BIT(1)
+#define SYNCTRL1_Q0_DIV_SYNC_TRIG	BIT(0)
+
+#define HW_Q8_CTRL_SPARE  (0xa7d4)
+#define HW_Q11_CTRL_SPARE (0xa7ec)
+
+/**
+ * Select FOD5 as sync_trigger for Q8 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q8 divider.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD5 as driver for clock and sync for Q8 divider.
+ * Enable fanout buffer for FOD5.
+ *
+ * Unused when FOD4 is driving Q8 divider (normal operation).
+ */
+#define Q9_TO_Q8_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+/**
+ * Select FOD6 as sync_trigger for Q11 divider.
+ * Transition from logic zero to one
+ * sets trigger to sync Q11 divider.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_SYNC_TRIG  BIT(1)
+
+/**
+ * Enable FOD6 as driver for clock and sync for Q11 divider.
+ * Enable fanout buffer for FOD6.
+ *
+ * Unused when FOD7 is driving Q11 divider (normal operation).
+ */
+#define Q10_TO_Q11_FANOUT_AND_CLOCK_SYNC_ENABLE_MASK  (BIT(0) | BIT(2))
+
+#define RESET_CTRL                        0xc000
+#define SM_RESET                          0x0012
+#define SM_RESET_V520                     0x0013
+#define SM_RESET_CMD                      0x5A
+
+#define GENERAL_STATUS                    0xc014
+#define BOOT_STATUS                       0x0000
+#define HW_REV_ID                         0x000A
+#define BOND_ID                           0x000B
+#define HW_CSR_ID                         0x000C
+#define HW_IRQ_ID                         0x000E
+#define MAJ_REL                           0x0010
+#define MIN_REL                           0x0011
+#define HOTFIX_REL                        0x0012
+#define PIPELINE_ID                       0x0014
+#define BUILD_ID                          0x0018
+#define JTAG_DEVICE_ID                    0x001c
+#define PRODUCT_ID                        0x001e
+#define OTP_SCSR_CONFIG_SELECT            0x0022
+
+#define STATUS                            0xc03c
+#define DPLL0_STATUS			  0x0018
+#define DPLL1_STATUS			  0x0019
+#define DPLL2_STATUS			  0x001a
+#define DPLL3_STATUS			  0x001b
+#define DPLL4_STATUS			  0x001c
+#define DPLL5_STATUS			  0x001d
+#define DPLL6_STATUS			  0x001e
+#define DPLL7_STATUS			  0x001f
+#define DPLL_SYS_STATUS                   0x0020
+#define DPLL_SYS_APLL_STATUS              0x0021
+#define DPLL0_FILTER_STATUS               0x0044
+#define DPLL1_FILTER_STATUS               0x004c
+#define DPLL2_FILTER_STATUS               0x0054
+#define DPLL3_FILTER_STATUS               0x005c
+#define DPLL4_FILTER_STATUS               0x0064
+#define DPLL5_FILTER_STATUS               0x006c
+#define DPLL6_FILTER_STATUS               0x0074
+#define DPLL7_FILTER_STATUS               0x007c
+#define DPLLSYS_FILTER_STATUS             0x0084
+#define USER_GPIO0_TO_7_STATUS            0x008a
+#define USER_GPIO8_TO_15_STATUS           0x008b
+
+#define GPIO_USER_CONTROL                 0xc160
+#define GPIO0_TO_7_OUT                    0x0000
+#define GPIO8_TO_15_OUT                   0x0001
+#define GPIO0_TO_7_OUT_V520               0x0002
+#define GPIO8_TO_15_OUT_V520              0x0003
+
+#define STICKY_STATUS_CLEAR               0xc164
+
+#define GPIO_TOD_NOTIFICATION_CLEAR       0xc16c
+
+#define ALERT_CFG                         0xc188
+
+#define SYS_DPLL_XO                       0xc194
+
+#define SYS_APLL                          0xc19c
+
+#define INPUT_0                           0xc1b0
+#define INPUT_1                           0xc1c0
+#define INPUT_2                           0xc1d0
+#define INPUT_3                           0xc200
+#define INPUT_4                           0xc210
+#define INPUT_5                           0xc220
+#define INPUT_6                           0xc230
+#define INPUT_7                           0xc240
+#define INPUT_8                           0xc250
+#define INPUT_9                           0xc260
+#define INPUT_10                          0xc280
+#define INPUT_11                          0xc290
+#define INPUT_12                          0xc2a0
+#define INPUT_13                          0xc2b0
+#define INPUT_14                          0xc2c0
+#define INPUT_15                          0xc2d0
+
+#define REF_MON_0                         0xc2e0
+#define REF_MON_1                         0xc2ec
+#define REF_MON_2                         0xc300
+#define REF_MON_3                         0xc30c
+#define REF_MON_4                         0xc318
+#define REF_MON_5                         0xc324
+#define REF_MON_6                         0xc330
+#define REF_MON_7                         0xc33c
+#define REF_MON_8                         0xc348
+#define REF_MON_9                         0xc354
+#define REF_MON_10                        0xc360
+#define REF_MON_11                        0xc36c
+#define REF_MON_12                        0xc380
+#define REF_MON_13                        0xc38c
+#define REF_MON_14                        0xc398
+#define REF_MON_15                        0xc3a4
+
+#define DPLL_0                            0xc3b0
+#define DPLL_CTRL_REG_0                   0x0002
+#define DPLL_CTRL_REG_1                   0x0003
+#define DPLL_CTRL_REG_2                   0x0004
+#define DPLL_TOD_SYNC_CFG                 0x0031
+#define DPLL_COMBO_SLAVE_CFG_0            0x0032
+#define DPLL_COMBO_SLAVE_CFG_1            0x0033
+#define DPLL_SLAVE_REF_CFG                0x0034
+#define DPLL_REF_MODE                     0x0035
+#define DPLL_PHASE_MEASUREMENT_CFG        0x0036
+#define DPLL_MODE                         0x0037
+#define DPLL_MODE_V520                    0x003B
+#define DPLL_1                            0xc400
+#define DPLL_2                            0xc438
+#define DPLL_2_V520                       0xc43c
+#define DPLL_3                            0xc480
+#define DPLL_4                            0xc4b8
+#define DPLL_4_V520                       0xc4bc
+#define DPLL_5                            0xc500
+#define DPLL_6                            0xc538
+#define DPLL_6_V520                       0xc53c
+#define DPLL_7                            0xc580
+#define SYS_DPLL                          0xc5b8
+#define SYS_DPLL_V520                     0xc5bc
+
+#define DPLL_CTRL_0                       0xc600
+#define DPLL_CTRL_DPLL_MANU_REF_CFG       0x0001
+#define DPLL_CTRL_DPLL_FOD_FREQ           0x001c
+#define DPLL_CTRL_COMBO_MASTER_CFG        0x003a
+#define DPLL_CTRL_1                       0xc63c
+#define DPLL_CTRL_2                       0xc680
+#define DPLL_CTRL_3                       0xc6bc
+#define DPLL_CTRL_4                       0xc700
+#define DPLL_CTRL_5                       0xc73c
+#define DPLL_CTRL_6                       0xc780
+#define DPLL_CTRL_7                       0xc7bc
+#define SYS_DPLL_CTRL                     0xc800
+
+#define DPLL_PHASE_0                      0xc818
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_PHASE                     0x0000
+#define DPLL_PHASE_1                      0xc81c
+#define DPLL_PHASE_2                      0xc820
+#define DPLL_PHASE_3                      0xc824
+#define DPLL_PHASE_4                      0xc828
+#define DPLL_PHASE_5                      0xc82c
+#define DPLL_PHASE_6                      0xc830
+#define DPLL_PHASE_7                      0xc834
+
+#define DPLL_FREQ_0                       0xc838
+/* Signed 42-bit FFO in units of 2^(-53) */
+#define DPLL_WR_FREQ                      0x0000
+#define DPLL_FREQ_1                       0xc840
+#define DPLL_FREQ_2                       0xc848
+#define DPLL_FREQ_3                       0xc850
+#define DPLL_FREQ_4                       0xc858
+#define DPLL_FREQ_5                       0xc860
+#define DPLL_FREQ_6                       0xc868
+#define DPLL_FREQ_7                       0xc870
+
+#define DPLL_PHASE_PULL_IN_0              0xc880
+#define PULL_IN_OFFSET                    0x0000 /* Signed 32 bit */
+#define PULL_IN_SLOPE_LIMIT               0x0004 /* Unsigned 24 bit */
+#define PULL_IN_CTRL                      0x0007
+#define DPLL_PHASE_PULL_IN_1              0xc888
+#define DPLL_PHASE_PULL_IN_2              0xc890
+#define DPLL_PHASE_PULL_IN_3              0xc898
+#define DPLL_PHASE_PULL_IN_4              0xc8a0
+#define DPLL_PHASE_PULL_IN_5              0xc8a8
+#define DPLL_PHASE_PULL_IN_6              0xc8b0
+#define DPLL_PHASE_PULL_IN_7              0xc8b8
+
+#define GPIO_CFG                          0xc8c0
+#define GPIO_CFG_GBL                      0x0000
+#define GPIO_0                            0xc8c2
+#define GPIO_DCO_INC_DEC                  0x0000
+#define GPIO_OUT_CTRL_0                   0x0001
+#define GPIO_OUT_CTRL_1                   0x0002
+#define GPIO_TOD_TRIG                     0x0003
+#define GPIO_DPLL_INDICATOR               0x0004
+#define GPIO_LOS_INDICATOR                0x0005
+#define GPIO_REF_INPUT_DSQ_0              0x0006
+#define GPIO_REF_INPUT_DSQ_1              0x0007
+#define GPIO_REF_INPUT_DSQ_2              0x0008
+#define GPIO_REF_INPUT_DSQ_3              0x0009
+#define GPIO_MAN_CLK_SEL_0                0x000a
+#define GPIO_MAN_CLK_SEL_1                0x000b
+#define GPIO_MAN_CLK_SEL_2                0x000c
+#define GPIO_SLAVE                        0x000d
+#define GPIO_ALERT_OUT_CFG                0x000e
+#define GPIO_TOD_NOTIFICATION_CFG         0x000f
+#define GPIO_CTRL                         0x0010
+#define GPIO_CTRL_V520                    0x0011
+#define GPIO_1                            0xc8d4
+#define GPIO_2                            0xc8e6
+#define GPIO_3                            0xc900
+#define GPIO_4                            0xc912
+#define GPIO_5                            0xc924
+#define GPIO_6                            0xc936
+#define GPIO_7                            0xc948
+#define GPIO_8                            0xc95a
+#define GPIO_9                            0xc980
+#define GPIO_10                           0xc992
+#define GPIO_11                           0xc9a4
+#define GPIO_12                           0xc9b6
+#define GPIO_13                           0xc9c8
+#define GPIO_14                           0xc9da
+#define GPIO_15                           0xca00
+
+#define OUT_DIV_MUX                       0xca12
+#define OUTPUT_0                          0xca14
+#define OUTPUT_0_V520                     0xca20
+/* FOD frequency output divider value */
+#define OUT_DIV                           0x0000
+#define OUT_DUTY_CYCLE_HIGH               0x0004
+#define OUT_CTRL_0                        0x0008
+#define OUT_CTRL_1                        0x0009
+/* Phase adjustment in FOD cycles */
+#define OUT_PHASE_ADJ                     0x000c
+#define OUTPUT_1                          0xca24
+#define OUTPUT_1_V520                     0xca30
+#define OUTPUT_2                          0xca34
+#define OUTPUT_2_V520                     0xca40
+#define OUTPUT_3                          0xca44
+#define OUTPUT_3_V520                     0xca50
+#define OUTPUT_4                          0xca54
+#define OUTPUT_4_V520                     0xca60
+#define OUTPUT_5                          0xca64
+#define OUTPUT_5_V520                     0xca80
+#define OUTPUT_6                          0xca80
+#define OUTPUT_6_V520                     0xca90
+#define OUTPUT_7                          0xca90
+#define OUTPUT_7_V520                     0xcaa0
+#define OUTPUT_8                          0xcaa0
+#define OUTPUT_8_V520                     0xcab0
+#define OUTPUT_9                          0xcab0
+#define OUTPUT_9_V520                     0xcac0
+#define OUTPUT_10                         0xcac0
+#define OUTPUT_10_V520                     0xcad0
+#define OUTPUT_11                         0xcad0
+#define OUTPUT_11_V520                    0xcae0
+
+#define SERIAL                            0xcae0
+#define SERIAL_V520                       0xcaf0
+
+#define PWM_ENCODER_0                     0xcb00
+#define PWM_ENCODER_1                     0xcb08
+#define PWM_ENCODER_2                     0xcb10
+#define PWM_ENCODER_3                     0xcb18
+#define PWM_ENCODER_4                     0xcb20
+#define PWM_ENCODER_5                     0xcb28
+#define PWM_ENCODER_6                     0xcb30
+#define PWM_ENCODER_7                     0xcb38
+#define PWM_DECODER_0                     0xcb40
+#define PWM_DECODER_1                     0xcb48
+#define PWM_DECODER_1_V520                0xcb4a
+#define PWM_DECODER_2                     0xcb50
+#define PWM_DECODER_2_V520                0xcb54
+#define PWM_DECODER_3                     0xcb58
+#define PWM_DECODER_3_V520                0xcb5e
+#define PWM_DECODER_4                     0xcb60
+#define PWM_DECODER_4_V520                0xcb68
+#define PWM_DECODER_5                     0xcb68
+#define PWM_DECODER_5_V520                0xcb80
+#define PWM_DECODER_6                     0xcb70
+#define PWM_DECODER_6_V520                0xcb8a
+#define PWM_DECODER_7                     0xcb80
+#define PWM_DECODER_7_V520                0xcb94
+#define PWM_DECODER_8                     0xcb88
+#define PWM_DECODER_8_V520                0xcb9e
+#define PWM_DECODER_9                     0xcb90
+#define PWM_DECODER_9_V520                0xcba8
+#define PWM_DECODER_10                    0xcb98
+#define PWM_DECODER_10_V520               0xcbb2
+#define PWM_DECODER_11                    0xcba0
+#define PWM_DECODER_11_V520               0xcbbc
+#define PWM_DECODER_12                    0xcba8
+#define PWM_DECODER_12_V520               0xcbc6
+#define PWM_DECODER_13                    0xcbb0
+#define PWM_DECODER_13_V520               0xcbd0
+#define PWM_DECODER_14                    0xcbb8
+#define PWM_DECODER_14_V520               0xcbda
+#define PWM_DECODER_15                    0xcbc0
+#define PWM_DECODER_15_V520               0xcbe4
+#define PWM_USER_DATA                     0xcbc8
+#define PWM_USER_DATA_V520                0xcbf0
+
+#define TOD_0                             0xcbcc
+#define TOD_0_V520                        0xcc00
+/* Enable TOD counter, output channel sync and even-PPS mode */
+#define TOD_CFG                           0x0000
+#define TOD_CFG_V520                      0x0001
+#define TOD_1                             0xcbce
+#define TOD_1_V520                        0xcc02
+#define TOD_2                             0xcbd0
+#define TOD_2_V520                        0xcc04
+#define TOD_3                             0xcbd2
+#define TOD_3_V520                        0xcc06
+
+#define TOD_WRITE_0                       0xcc00
+#define TOD_WRITE_0_V520                  0xcc10
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_WRITE                         0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_WRITE_COUNTER                 0x000c
+/* TOD write trigger configuration */
+#define TOD_WRITE_SELECT_CFG_0            0x000d
+/* TOD write trigger selection */
+#define TOD_WRITE_CMD                     0x000f
+#define TOD_WRITE_1                       0xcc10
+#define TOD_WRITE_1_V520                  0xcc20
+#define TOD_WRITE_2                       0xcc20
+#define TOD_WRITE_2_V520                  0xcc30
+#define TOD_WRITE_3                       0xcc30
+#define TOD_WRITE_3_V520                  0xcc40
+
+#define TOD_READ_PRIMARY_0                0xcc40
+#define TOD_READ_PRIMARY_0_V520           0xcc50
+/* 8-bit subns, 32-bit ns, 48-bit seconds */
+#define TOD_READ_PRIMARY                  0x0000
+/* Counter increments after TOD write is completed */
+#define TOD_READ_PRIMARY_COUNTER          0x000b
+/* Read trigger configuration */
+#define TOD_READ_PRIMARY_SEL_CFG_0        0x000c
+/* Read trigger selection */
+#define TOD_READ_PRIMARY_CMD              0x000e
+#define TOD_READ_PRIMARY_CMD_V520         0x000f
+#define TOD_READ_PRIMARY_1                0xcc50
+#define TOD_READ_PRIMARY_1_V520           0xcc60
+#define TOD_READ_PRIMARY_2                0xcc60
+#define TOD_READ_PRIMARY_2_V520           0xcc80
+#define TOD_READ_PRIMARY_3                0xcc80
+#define TOD_READ_PRIMARY_3_V520           0xcc90
+
+#define TOD_READ_SECONDARY_0              0xcc90
+#define TOD_READ_SECONDARY_0_V520         0xcca0
+#define TOD_READ_SECONDARY_1              0xcca0
+#define TOD_READ_SECONDARY_1_V520         0xccb0
+#define TOD_READ_SECONDARY_2              0xccb0
+#define TOD_READ_SECONDARY_2_V520         0xccc0
+#define TOD_READ_SECONDARY_3              0xccc0
+#define TOD_READ_SECONDARY_3_V520         0xccd0
+
+#define OUTPUT_TDC_CFG                    0xccd0
+#define OUTPUT_TDC_CFG_V520               0xcce0
+#define OUTPUT_TDC_0                      0xcd00
+#define OUTPUT_TDC_1                      0xcd08
+#define OUTPUT_TDC_2                      0xcd10
+#define OUTPUT_TDC_3                      0xcd18
+#define INPUT_TDC                         0xcd20
+
+#define SCRATCH                           0xcf50
+#define SCRATCH_V520                      0xcf4c
+
+#define EEPROM                            0xcf68
+#define EEPROM_V520                       0xcf64
+
+#define OTP                               0xcf70
+
+#define BYTE                              0xcf80
+
+/* Bit definitions for the MAJ_REL register */
+#define MAJOR_SHIFT                       (1)
+#define MAJOR_MASK                        (0x7f)
+#define PR_BUILD                          BIT(0)
+
+/* Bit definitions for the USER_GPIO0_TO_7_STATUS register */
+#define GPIO0_LEVEL                       BIT(0)
+#define GPIO1_LEVEL                       BIT(1)
+#define GPIO2_LEVEL                       BIT(2)
+#define GPIO3_LEVEL                       BIT(3)
+#define GPIO4_LEVEL                       BIT(4)
+#define GPIO5_LEVEL                       BIT(5)
+#define GPIO6_LEVEL                       BIT(6)
+#define GPIO7_LEVEL                       BIT(7)
+
+/* Bit definitions for the USER_GPIO8_TO_15_STATUS register */
+#define GPIO8_LEVEL                       BIT(0)
+#define GPIO9_LEVEL                       BIT(1)
+#define GPIO10_LEVEL                      BIT(2)
+#define GPIO11_LEVEL                      BIT(3)
+#define GPIO12_LEVEL                      BIT(4)
+#define GPIO13_LEVEL                      BIT(5)
+#define GPIO14_LEVEL                      BIT(6)
+#define GPIO15_LEVEL                      BIT(7)
+
+/* Bit definitions for the GPIO0_TO_7_OUT register */
+#define GPIO0_DRIVE_LEVEL                 BIT(0)
+#define GPIO1_DRIVE_LEVEL                 BIT(1)
+#define GPIO2_DRIVE_LEVEL                 BIT(2)
+#define GPIO3_DRIVE_LEVEL                 BIT(3)
+#define GPIO4_DRIVE_LEVEL                 BIT(4)
+#define GPIO5_DRIVE_LEVEL                 BIT(5)
+#define GPIO6_DRIVE_LEVEL                 BIT(6)
+#define GPIO7_DRIVE_LEVEL                 BIT(7)
+
+/* Bit definitions for the GPIO8_TO_15_OUT register */
+#define GPIO8_DRIVE_LEVEL                 BIT(0)
+#define GPIO9_DRIVE_LEVEL                 BIT(1)
+#define GPIO10_DRIVE_LEVEL                BIT(2)
+#define GPIO11_DRIVE_LEVEL                BIT(3)
+#define GPIO12_DRIVE_LEVEL                BIT(4)
+#define GPIO13_DRIVE_LEVEL                BIT(5)
+#define GPIO14_DRIVE_LEVEL                BIT(6)
+#define GPIO15_DRIVE_LEVEL                BIT(7)
+
+/* Bit definitions for the DPLL_TOD_SYNC_CFG register */
+#define TOD_SYNC_SOURCE_SHIFT             (1)
+#define TOD_SYNC_SOURCE_MASK              (0x3)
+#define TOD_SYNC_EN                       BIT(0)
+
+/* Bit definitions for the DPLL_MODE register */
+#define WRITE_TIMER_MODE                  BIT(6)
+#define PLL_MODE_SHIFT                    (3)
+#define PLL_MODE_MASK                     (0x7)
+#define STATE_MODE_SHIFT                  (0)
+#define STATE_MODE_MASK                   (0x7)
+
+/* Bit definitions for the GPIO_CFG_GBL register */
+#define SUPPLY_MODE_SHIFT                 (0)
+#define SUPPLY_MODE_MASK                  (0x3)
+
+/* Bit definitions for the GPIO_DCO_INC_DEC register */
+#define INCDEC_DPLL_INDEX_SHIFT           (0)
+#define INCDEC_DPLL_INDEX_MASK            (0x7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_0 register */
+#define CTRL_OUT_0                        BIT(0)
+#define CTRL_OUT_1                        BIT(1)
+#define CTRL_OUT_2                        BIT(2)
+#define CTRL_OUT_3                        BIT(3)
+#define CTRL_OUT_4                        BIT(4)
+#define CTRL_OUT_5                        BIT(5)
+#define CTRL_OUT_6                        BIT(6)
+#define CTRL_OUT_7                        BIT(7)
+
+/* Bit definitions for the GPIO_OUT_CTRL_1 register */
+#define CTRL_OUT_8                        BIT(0)
+#define CTRL_OUT_9                        BIT(1)
+#define CTRL_OUT_10                       BIT(2)
+#define CTRL_OUT_11                       BIT(3)
+#define CTRL_OUT_12                       BIT(4)
+#define CTRL_OUT_13                       BIT(5)
+#define CTRL_OUT_14                       BIT(6)
+#define CTRL_OUT_15                       BIT(7)
+
+/* Bit definitions for the GPIO_TOD_TRIG register */
+#define TOD_TRIG_0                        BIT(0)
+#define TOD_TRIG_1                        BIT(1)
+#define TOD_TRIG_2                        BIT(2)
+#define TOD_TRIG_3                        BIT(3)
+
+/* Bit definitions for the GPIO_DPLL_INDICATOR register */
+#define IND_DPLL_INDEX_SHIFT              (0)
+#define IND_DPLL_INDEX_MASK               (0x7)
+
+/* Bit definitions for the GPIO_LOS_INDICATOR register */
+#define REFMON_INDEX_SHIFT                (0)
+#define REFMON_INDEX_MASK                 (0xf)
+/* Active level of LOS indicator, 0=low 1=high */
+#define ACTIVE_LEVEL                      BIT(4)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_0 register */
+#define DSQ_INP_0                         BIT(0)
+#define DSQ_INP_1                         BIT(1)
+#define DSQ_INP_2                         BIT(2)
+#define DSQ_INP_3                         BIT(3)
+#define DSQ_INP_4                         BIT(4)
+#define DSQ_INP_5                         BIT(5)
+#define DSQ_INP_6                         BIT(6)
+#define DSQ_INP_7                         BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_1 register */
+#define DSQ_INP_8                         BIT(0)
+#define DSQ_INP_9                         BIT(1)
+#define DSQ_INP_10                        BIT(2)
+#define DSQ_INP_11                        BIT(3)
+#define DSQ_INP_12                        BIT(4)
+#define DSQ_INP_13                        BIT(5)
+#define DSQ_INP_14                        BIT(6)
+#define DSQ_INP_15                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_2 register */
+#define DSQ_DPLL_0                        BIT(0)
+#define DSQ_DPLL_1                        BIT(1)
+#define DSQ_DPLL_2                        BIT(2)
+#define DSQ_DPLL_3                        BIT(3)
+#define DSQ_DPLL_4                        BIT(4)
+#define DSQ_DPLL_5                        BIT(5)
+#define DSQ_DPLL_6                        BIT(6)
+#define DSQ_DPLL_7                        BIT(7)
+
+/* Bit definitions for the GPIO_REF_INPUT_DSQ_3 register */
+#define DSQ_DPLL_SYS                      BIT(0)
+#define GPIO_DSQ_LEVEL                    BIT(1)
+
+/* Bit definitions for the GPIO_TOD_NOTIFICATION_CFG register */
+#define DPLL_TOD_SHIFT                    (0)
+#define DPLL_TOD_MASK                     (0x3)
+#define TOD_READ_SECONDARY                BIT(2)
+#define GPIO_ASSERT_LEVEL                 BIT(3)
+
+/* Bit definitions for the GPIO_CTRL register */
+#define GPIO_FUNCTION_EN                  BIT(0)
+#define GPIO_CMOS_OD_MODE                 BIT(1)
+#define GPIO_CONTROL_DIR                  BIT(2)
+#define GPIO_PU_PD_MODE                   BIT(3)
+#define GPIO_FUNCTION_SHIFT               (4)
+#define GPIO_FUNCTION_MASK                (0xf)
+
+/* Bit definitions for the OUT_CTRL_1 register */
+#define OUT_SYNC_DISABLE                  BIT(7)
+#define SQUELCH_VALUE                     BIT(6)
+#define SQUELCH_DISABLE                   BIT(5)
+#define PAD_VDDO_SHIFT                    (2)
+#define PAD_VDDO_MASK                     (0x7)
+#define PAD_CMOSDRV_SHIFT                 (0)
+#define PAD_CMOSDRV_MASK                  (0x3)
+
+/* Bit definitions for the TOD_CFG register */
+#define TOD_EVEN_PPS_MODE                 BIT(2)
+#define TOD_OUT_SYNC_ENABLE               BIT(1)
+#define TOD_ENABLE                        BIT(0)
+
+/* Bit definitions for the TOD_WRITE_SELECT_CFG_0 register */
+#define WR_PWM_DECODER_INDEX_SHIFT        (4)
+#define WR_PWM_DECODER_INDEX_MASK         (0xf)
+#define WR_REF_INDEX_SHIFT                (0)
+#define WR_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_WRITE_CMD register */
+#define TOD_WRITE_SELECTION_SHIFT         (0)
+#define TOD_WRITE_SELECTION_MASK          (0xf)
+/* 4.8.7 */
+#define TOD_WRITE_TYPE_SHIFT              (4)
+#define TOD_WRITE_TYPE_MASK               (0x3)
+
+/* Bit definitions for the TOD_READ_PRIMARY_SEL_CFG_0 register */
+#define RD_PWM_DECODER_INDEX_SHIFT        (4)
+#define RD_PWM_DECODER_INDEX_MASK         (0xf)
+#define RD_REF_INDEX_SHIFT                (0)
+#define RD_REF_INDEX_MASK                 (0xf)
+
+/* Bit definitions for the TOD_READ_PRIMARY_CMD register */
+#define TOD_READ_TRIGGER_MODE             BIT(4)
+#define TOD_READ_TRIGGER_SHIFT            (0)
+#define TOD_READ_TRIGGER_MASK             (0xf)
+
+/* Bit definitions for the DPLL_CTRL_COMBO_MASTER_CFG register */
+#define COMBO_MASTER_HOLD                 BIT(0)
+
+/* Bit definitions for DPLL_SYS_STATUS register */
+#define DPLL_SYS_STATE_MASK               (0xf)
+
+/* Bit definitions for SYS_APLL_STATUS register */
+#define SYS_APLL_LOSS_LOCK_LIVE_MASK       BIT(0)
+#define SYS_APLL_LOSS_LOCK_LIVE_LOCKED     0
+#define SYS_APLL_LOSS_LOCK_LIVE_UNLOCKED   1
+
+/* Bit definitions for the DPLL0_STATUS register */
+#define DPLL_STATE_MASK                   (0xf)
+#define DPLL_STATE_SHIFT                  (0x0)
+
+/* Values of DPLL_N.DPLL_MODE.PLL_MODE */
+enum pll_mode {
+	PLL_MODE_MIN = 0,
+	PLL_MODE_NORMAL = PLL_MODE_MIN,
+	PLL_MODE_WRITE_PHASE = 1,
+	PLL_MODE_WRITE_FREQUENCY = 2,
+	PLL_MODE_GPIO_INC_DEC = 3,
+	PLL_MODE_SYNTHESIS = 4,
+	PLL_MODE_PHASE_MEASUREMENT = 5,
+	PLL_MODE_DISABLED = 6,
+	PLL_MODE_MAX = PLL_MODE_DISABLED,
+};
+
+enum hw_tod_write_trig_sel {
+	HW_TOD_WR_TRIG_SEL_MIN = 0,
+	HW_TOD_WR_TRIG_SEL_MSB = HW_TOD_WR_TRIG_SEL_MIN,
+	HW_TOD_WR_TRIG_SEL_RESERVED = 1,
+	HW_TOD_WR_TRIG_SEL_TOD_PPS = 2,
+	HW_TOD_WR_TRIG_SEL_IRIGB_PPS = 3,
+	HW_TOD_WR_TRIG_SEL_PWM_PPS = 4,
+	HW_TOD_WR_TRIG_SEL_GPIO = 5,
+	HW_TOD_WR_TRIG_SEL_FOD_SYNC = 6,
+	WR_TRIG_SEL_MAX = HW_TOD_WR_TRIG_SEL_FOD_SYNC,
+};
+
+enum scsr_read_trig_sel {
+	/* CANCEL CURRENT TOD READ; MODULE BECOMES IDLE - NO TRIGGER OCCURS */
+	SCSR_TOD_READ_TRIG_SEL_DISABLE = 0,
+	/* TRIGGER IMMEDIATELY */
+	SCSR_TOD_READ_TRIG_SEL_IMMEDIATE = 1,
+	/* TRIGGER ON RISING EDGE OF INTERNAL TOD PPS SIGNAL */
+	SCSR_TOD_READ_TRIG_SEL_TODPPS = 2,
+	/* TRGGER ON RISING EDGE OF SELECTED REFERENCE INPUT */
+	SCSR_TOD_READ_TRIG_SEL_REFCLK = 3,
+	/* TRIGGER ON RISING EDGE OF SELECTED PWM DECODER 1PPS OUTPUT */
+	SCSR_TOD_READ_TRIG_SEL_PWMPPS = 4,
+	SCSR_TOD_READ_TRIG_SEL_RESERVED = 5,
+	/* TRIGGER WHEN WRITE FREQUENCY EVENT OCCURS  */
+	SCSR_TOD_READ_TRIG_SEL_WRITEFREQUENCYEVENT = 6,
+	/* TRIGGER ON SELECTED GPIO */
+	SCSR_TOD_READ_TRIG_SEL_GPIO = 7,
+	SCSR_TOD_READ_TRIG_SEL_MAX = SCSR_TOD_READ_TRIG_SEL_GPIO,
+};
+
+/* Values STATUS.DPLL_SYS_STATUS.DPLL_SYS_STATE */
+enum dpll_state {
+	DPLL_STATE_MIN = 0,
+	DPLL_STATE_FREERUN = DPLL_STATE_MIN,
+	DPLL_STATE_LOCKACQ = 1,
+	DPLL_STATE_LOCKREC = 2,
+	DPLL_STATE_LOCKED = 3,
+	DPLL_STATE_HOLDOVER = 4,
+	DPLL_STATE_OPEN_LOOP = 5,
+	DPLL_STATE_MAX = DPLL_STATE_OPEN_LOOP,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_trig_sel {
+	SCSR_TOD_WR_TRIG_SEL_DISABLE = 0,
+	SCSR_TOD_WR_TRIG_SEL_IMMEDIATE = 1,
+	SCSR_TOD_WR_TRIG_SEL_REFCLK = 2,
+	SCSR_TOD_WR_TRIG_SEL_PWMPPS = 3,
+	SCSR_TOD_WR_TRIG_SEL_TODPPS = 4,
+	SCSR_TOD_WR_TRIG_SEL_SYNCFOD = 5,
+	SCSR_TOD_WR_TRIG_SEL_GPIO = 6,
+	SCSR_TOD_WR_TRIG_SEL_MAX = SCSR_TOD_WR_TRIG_SEL_GPIO,
+};
+
+/* 4.8.7 only */
+enum scsr_tod_write_type_sel {
+	SCSR_TOD_WR_TYPE_SEL_ABSOLUTE = 0,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_PLUS = 1,
+	SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS = 2,
+	SCSR_TOD_WR_TYPE_SEL_MAX = SCSR_TOD_WR_TYPE_SEL_DELTA_MINUS,
+};
+#endif
diff --git a/include/linux/mfd/rsmu.h b/include/linux/mfd/rsmu.h
new file mode 100644
index 000000000000..6870de608233
--- /dev/null
+++ b/include/linux/mfd/rsmu.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Core interface for Renesas Synchronization Management Unit (SMU) devices.
+ *
+ * Copyright (C) 2021 Integrated Device Technology, Inc., a Renesas Company.
+ */
+
+#ifndef __LINUX_MFD_RSMU_H
+#define __LINUX_MFD_RSMU_H
+
+/* The supported devices are ClockMatrix, Sabre and SnowLotus */
+enum rsmu_type {
+	RSMU_CM		= 0x34000,
+	RSMU_SABRE	= 0x33810,
+	RSMU_SL		= 0x19850,
+};
+
+/**
+ *
+ * struct rsmu_ddata - device data structure for sub devices.
+ *
+ * @dev:    i2c/spi device.
+ * @regmap: i2c/spi bus access.
+ * @lock:   mutex used by sub devices to make sure a series of
+ *          bus access requests are not interrupted.
+ * @type:   RSMU device type.
+ * @page:   i2c/spi bus driver internal use only.
+ */
+struct rsmu_ddata {
+	struct device *dev;
+	struct regmap *regmap;
+	struct mutex lock;
+	enum rsmu_type type;
+	u16 page;
+};
+#endif /*  __LINUX_MFD_RSMU_H */
diff --git a/include/linux/mm.h b/include/linux/mm.h
index 50e2c2914ac2..73a52aba448f 100644
--- a/include/linux/mm.h
+++ b/include/linux/mm.h
@@ -1218,7 +1218,15 @@ bool __must_check try_grab_page(struct page *page, unsigned int flags);
 struct page *try_grab_compound_head(struct page *page, int refs,
 				    unsigned int flags);
 
-struct page *try_get_compound_head(struct page *page, int refs);
+
+static inline __must_check bool try_get_page(struct page *page)
+{
+	page = compound_head(page);
+	if (WARN_ON_ONCE(page_ref_count(page) <= 0))
+		return false;
+	page_ref_inc(page);
+	return true;
+}
 
 static inline void put_page(struct page *page)
 {
diff --git a/include/linux/mmap_lock.h b/include/linux/mmap_lock.h
index 0540f0156f58..b179f1e3541a 100644
--- a/include/linux/mmap_lock.h
+++ b/include/linux/mmap_lock.h
@@ -101,14 +101,14 @@ static inline bool mmap_write_trylock(struct mm_struct *mm)
 
 static inline void mmap_write_unlock(struct mm_struct *mm)
 {
-	up_write(&mm->mmap_lock);
 	__mmap_lock_trace_released(mm, true);
+	up_write(&mm->mmap_lock);
 }
 
 static inline void mmap_write_downgrade(struct mm_struct *mm)
 {
-	downgrade_write(&mm->mmap_lock);
 	__mmap_lock_trace_acquire_returned(mm, false, true);
+	downgrade_write(&mm->mmap_lock);
 }
 
 static inline void mmap_read_lock(struct mm_struct *mm)
@@ -140,8 +140,8 @@ static inline bool mmap_read_trylock(struct mm_struct *mm)
 
 static inline void mmap_read_unlock(struct mm_struct *mm)
 {
-	up_read(&mm->mmap_lock);
 	__mmap_lock_trace_released(mm, false);
+	up_read(&mm->mmap_lock);
 }
 
 static inline bool mmap_read_trylock_non_owner(struct mm_struct *mm)
@@ -155,8 +155,8 @@ static inline bool mmap_read_trylock_non_owner(struct mm_struct *mm)
 
 static inline void mmap_read_unlock_non_owner(struct mm_struct *mm)
 {
-	up_read_non_owner(&mm->mmap_lock);
 	__mmap_lock_trace_released(mm, false);
+	up_read_non_owner(&mm->mmap_lock);
 }
 
 static inline void mmap_assert_locked(struct mm_struct *mm)
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 1bd5f5955f9a..6a1d79d84675 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -540,6 +540,10 @@ struct zone {
 	 * is calculated as:
 	 *	present_pages = spanned_pages - absent_pages(pages in holes);
 	 *
+	 * present_early_pages is present pages existing within the zone
+	 * located on memory available since early boot, excluding hotplugged
+	 * memory.
+	 *
 	 * managed_pages is present pages managed by the buddy system, which
 	 * is calculated as (reserved_pages includes pages allocated by the
 	 * bootmem allocator):
@@ -572,6 +576,9 @@ struct zone {
 	atomic_long_t		managed_pages;
 	unsigned long		spanned_pages;
 	unsigned long		present_pages;
+#if defined(CONFIG_MEMORY_HOTPLUG)
+	unsigned long		present_early_pages;
+#endif
 #ifdef CONFIG_CMA
 	unsigned long		cma_pages;
 #endif
@@ -1525,18 +1532,6 @@ void sparse_init(void);
 #define subsection_map_init(_pfn, _nr_pages) do {} while (0)
 #endif /* CONFIG_SPARSEMEM */
 
-/*
- * If it is possible to have holes within a MAX_ORDER_NR_PAGES, then we
- * need to check pfn validity within that MAX_ORDER_NR_PAGES block.
- * pfn_valid_within() should be used in this case; we optimise this away
- * when we have no holes within a MAX_ORDER_NR_PAGES block.
- */
-#ifdef CONFIG_HOLES_IN_ZONE
-#define pfn_valid_within(pfn) pfn_valid(pfn)
-#else
-#define pfn_valid_within(pfn) (1)
-#endif
-
 #endif /* !__GENERATING_BOUNDS.H */
 #endif /* !__ASSEMBLY__ */
 #endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index 7c41593c1d6a..d79163208dfd 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -4641,6 +4641,24 @@ void __hw_addr_unsync_dev(struct netdev_hw_addr_list *list,
 void __hw_addr_init(struct netdev_hw_addr_list *list);
 
 /* Functions used for device addresses handling */
+static inline void
+__dev_addr_set(struct net_device *dev, const u8 *addr, size_t len)
+{
+	memcpy(dev->dev_addr, addr, len);
+}
+
+static inline void dev_addr_set(struct net_device *dev, const u8 *addr)
+{
+	__dev_addr_set(dev, addr, dev->addr_len);
+}
+
+static inline void
+dev_addr_mod(struct net_device *dev, unsigned int offset,
+	     const u8 *addr, size_t len)
+{
+	memcpy(&dev->dev_addr[offset], addr, len);
+}
+
 int dev_addr_add(struct net_device *dev, const unsigned char *addr,
 		 unsigned char addr_type);
 int dev_addr_del(struct net_device *dev, const unsigned char *addr,
diff --git a/include/linux/netfilter/nf_conntrack_common.h b/include/linux/netfilter/nf_conntrack_common.h
index 0c7d8d1e945d..700ea077ce2d 100644
--- a/include/linux/netfilter/nf_conntrack_common.h
+++ b/include/linux/netfilter/nf_conntrack_common.h
@@ -18,6 +18,7 @@ struct ip_conntrack_stat {
 	unsigned int expect_create;
 	unsigned int expect_delete;
 	unsigned int search_restart;
+	unsigned int chaintoolong;
 };
 
 #define NFCT_INFOMASK	7UL
diff --git a/include/linux/of.h b/include/linux/of.h
index 0e786b60bd5d..6f1c41f109bb 100644
--- a/include/linux/of.h
+++ b/include/linux/of.h
@@ -896,7 +896,7 @@ static inline int of_parse_phandle_with_fixed_args(const struct device_node *np,
 	return -ENOSYS;
 }
 
-static inline int of_count_phandle_with_args(struct device_node *np,
+static inline int of_count_phandle_with_args(const struct device_node *np,
 					     const char *list_name,
 					     const char *cells_name)
 {
diff --git a/include/linux/of_gpio.h b/include/linux/of_gpio.h
index f821095218b0..8bf2ea859653 100644
--- a/include/linux/of_gpio.h
+++ b/include/linux/of_gpio.h
@@ -49,7 +49,7 @@ static inline struct of_mm_gpio_chip *to_of_mm_gpio_chip(struct gpio_chip *gc)
 	return container_of(gc, struct of_mm_gpio_chip, gc);
 }
 
-extern int of_get_named_gpio_flags(struct device_node *np,
+extern int of_get_named_gpio_flags(const struct device_node *np,
 		const char *list_name, int index, enum of_gpio_flags *flags);
 
 extern int of_mm_gpiochip_add_data(struct device_node *np,
@@ -67,7 +67,7 @@ extern void of_mm_gpiochip_remove(struct of_mm_gpio_chip *mm_gc);
 #include <linux/errno.h>
 
 /* Drivers may not strictly depend on the GPIO support, so let them link. */
-static inline int of_get_named_gpio_flags(struct device_node *np,
+static inline int of_get_named_gpio_flags(const struct device_node *np,
 		const char *list_name, int index, enum of_gpio_flags *flags)
 {
 	if (flags)
@@ -98,7 +98,8 @@ static inline int of_get_named_gpio_flags(struct device_node *np,
  * The above example defines four GPIOs, two of which are not specified.
  * This function will return '4'
  */
-static inline int of_gpio_named_count(struct device_node *np, const char* propname)
+static inline int of_gpio_named_count(const struct device_node *np,
+				      const char *propname)
 {
 	return of_count_phandle_with_args(np, propname, "#gpio-cells");
 }
@@ -109,12 +110,12 @@ static inline int of_gpio_named_count(struct device_node *np, const char* propna
  *
  * Same as of_gpio_named_count, but hard coded to use the 'gpios' property
  */
-static inline int of_gpio_count(struct device_node *np)
+static inline int of_gpio_count(const struct device_node *np)
 {
 	return of_gpio_named_count(np, "gpios");
 }
 
-static inline int of_get_gpio_flags(struct device_node *np, int index,
+static inline int of_get_gpio_flags(const struct device_node *np, int index,
 		      enum of_gpio_flags *flags)
 {
 	return of_get_named_gpio_flags(np, "gpios", index, flags);
@@ -129,7 +130,7 @@ static inline int of_get_gpio_flags(struct device_node *np, int index,
  * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
  * value on the error condition.
  */
-static inline int of_get_named_gpio(struct device_node *np,
+static inline int of_get_named_gpio(const struct device_node *np,
                                    const char *propname, int index)
 {
 	return of_get_named_gpio_flags(np, propname, index, NULL);
@@ -143,7 +144,7 @@ static inline int of_get_named_gpio(struct device_node *np,
  * Returns GPIO number to use with Linux generic GPIO API, or one of the errno
  * value on the error condition.
  */
-static inline int of_get_gpio(struct device_node *np, int index)
+static inline int of_get_gpio(const struct device_node *np, int index)
 {
 	return of_get_gpio_flags(np, index, NULL);
 }
diff --git a/include/linux/once.h b/include/linux/once.h
index ae6f4eb41cbe..d361fb14ac3a 100644
--- a/include/linux/once.h
+++ b/include/linux/once.h
@@ -16,7 +16,7 @@ void __do_once_done(bool *done, struct static_key_true *once_key,
  * out the condition into a nop. DO_ONCE() guarantees type safety of
  * arguments!
  *
- * Not that the following is not equivalent ...
+ * Note that the following is not equivalent ...
  *
  *   DO_ONCE(func, arg);
  *   DO_ONCE(func, arg);
diff --git a/include/linux/page-flags.h b/include/linux/page-flags.h
index 5922031ffab6..a558d67ee86f 100644
--- a/include/linux/page-flags.h
+++ b/include/linux/page-flags.h
@@ -131,7 +131,7 @@ enum pageflags {
 #ifdef CONFIG_MEMORY_FAILURE
 	PG_hwpoison,		/* hardware poisoned page. Don't touch */
 #endif
-#if defined(CONFIG_IDLE_PAGE_TRACKING) && defined(CONFIG_64BIT)
+#if defined(CONFIG_PAGE_IDLE_FLAG) && defined(CONFIG_64BIT)
 	PG_young,
 	PG_idle,
 #endif
@@ -178,6 +178,8 @@ enum pageflags {
 	PG_reported = PG_uptodate,
 };
 
+#define PAGEFLAGS_MASK		((1UL << NR_PAGEFLAGS) - 1)
+
 #ifndef __GENERATING_BOUNDS_H
 
 static inline unsigned long _compound_head(const struct page *page)
@@ -439,7 +441,7 @@ PAGEFLAG_FALSE(HWPoison)
 #define __PG_HWPOISON 0
 #endif
 
-#if defined(CONFIG_IDLE_PAGE_TRACKING) && defined(CONFIG_64BIT)
+#if defined(CONFIG_PAGE_IDLE_FLAG) && defined(CONFIG_64BIT)
 TESTPAGEFLAG(Young, young, PF_ANY)
 SETPAGEFLAG(Young, young, PF_ANY)
 TESTCLEARFLAG(Young, young, PF_ANY)
@@ -633,43 +635,6 @@ static inline int PageTransCompound(struct page *page)
 }
 
 /*
- * PageTransCompoundMap is the same as PageTransCompound, but it also
- * guarantees the primary MMU has the entire compound page mapped
- * through pmd_trans_huge, which in turn guarantees the secondary MMUs
- * can also map the entire compound page. This allows the secondary
- * MMUs to call get_user_pages() only once for each compound page and
- * to immediately map the entire compound page with a single secondary
- * MMU fault. If there will be a pmd split later, the secondary MMUs
- * will get an update through the MMU notifier invalidation through
- * split_huge_pmd().
- *
- * Unlike PageTransCompound, this is safe to be called only while
- * split_huge_pmd() cannot run from under us, like if protected by the
- * MMU notifier, otherwise it may result in page->_mapcount check false
- * positives.
- *
- * We have to treat page cache THP differently since every subpage of it
- * would get _mapcount inc'ed once it is PMD mapped.  But, it may be PTE
- * mapped in the current process so comparing subpage's _mapcount to
- * compound_mapcount to filter out PTE mapped case.
- */
-static inline int PageTransCompoundMap(struct page *page)
-{
-	struct page *head;
-
-	if (!PageTransCompound(page))
-		return 0;
-
-	if (PageAnon(page))
-		return atomic_read(&page->_mapcount) < 0;
-
-	head = compound_head(page);
-	/* File THP is PMD mapped and not PTE mapped */
-	return atomic_read(&page->_mapcount) ==
-	       atomic_read(compound_mapcount_ptr(head));
-}
-
-/*
  * PageTransTail returns true for both transparent huge pages
  * and hugetlbfs pages, so it should only be called when it's known
  * that hugetlbfs pages aren't involved.
@@ -815,6 +780,15 @@ static inline int PageSlabPfmemalloc(struct page *page)
 	return PageActive(page);
 }
 
+/*
+ * A version of PageSlabPfmemalloc() for opportunistic checks where the page
+ * might have been freed under us and not be a PageSlab anymore.
+ */
+static inline int __PageSlabPfmemalloc(struct page *page)
+{
+	return PageActive(page);
+}
+
 static inline void SetPageSlabPfmemalloc(struct page *page)
 {
 	VM_BUG_ON_PAGE(!PageSlab(page), page);
@@ -859,7 +833,7 @@ static inline void ClearPageSlabPfmemalloc(struct page *page)
  * alloc-free cycle to prevent from reusing the page.
  */
 #define PAGE_FLAGS_CHECK_AT_PREP	\
-	(((1UL << NR_PAGEFLAGS) - 1) & ~__PG_HWPOISON)
+	(PAGEFLAGS_MASK & ~__PG_HWPOISON)
 
 #define PAGE_FLAGS_PRIVATE				\
 	(1UL << PG_private | 1UL << PG_private_2)
diff --git a/include/linux/page_ext.h b/include/linux/page_ext.h
index aff81ba31bd8..fabb2e1e087f 100644
--- a/include/linux/page_ext.h
+++ b/include/linux/page_ext.h
@@ -19,7 +19,7 @@ struct page_ext_operations {
 enum page_ext_flags {
 	PAGE_EXT_OWNER,
 	PAGE_EXT_OWNER_ALLOCATED,
-#if defined(CONFIG_IDLE_PAGE_TRACKING) && !defined(CONFIG_64BIT)
+#if defined(CONFIG_PAGE_IDLE_FLAG) && !defined(CONFIG_64BIT)
 	PAGE_EXT_YOUNG,
 	PAGE_EXT_IDLE,
 #endif
diff --git a/include/linux/page_idle.h b/include/linux/page_idle.h
index 1e894d34bdce..d8a6aecf99cb 100644
--- a/include/linux/page_idle.h
+++ b/include/linux/page_idle.h
@@ -6,7 +6,7 @@
 #include <linux/page-flags.h>
 #include <linux/page_ext.h>
 
-#ifdef CONFIG_IDLE_PAGE_TRACKING
+#ifdef CONFIG_PAGE_IDLE_FLAG
 
 #ifdef CONFIG_64BIT
 static inline bool page_is_young(struct page *page)
@@ -106,7 +106,7 @@ static inline void clear_page_idle(struct page *page)
 }
 #endif /* CONFIG_64BIT */
 
-#else /* !CONFIG_IDLE_PAGE_TRACKING */
+#else /* !CONFIG_PAGE_IDLE_FLAG */
 
 static inline bool page_is_young(struct page *page)
 {
@@ -135,6 +135,6 @@ static inline void clear_page_idle(struct page *page)
 {
 }
 
-#endif /* CONFIG_IDLE_PAGE_TRACKING */
+#endif /* CONFIG_PAGE_IDLE_FLAG */
 
 #endif /* _LINUX_MM_PAGE_IDLE_H */
diff --git a/include/linux/pagemap.h b/include/linux/pagemap.h
index 5dcf446f42e5..62db6b0176b9 100644
--- a/include/linux/pagemap.h
+++ b/include/linux/pagemap.h
@@ -521,18 +521,17 @@ static inline struct page *read_mapping_page(struct address_space *mapping,
  */
 static inline pgoff_t page_to_index(struct page *page)
 {
-	pgoff_t pgoff;
+	struct page *head;
 
 	if (likely(!PageTransTail(page)))
 		return page->index;
 
+	head = compound_head(page);
 	/*
 	 *  We don't initialize ->index for tail pages: calculate based on
 	 *  head page
 	 */
-	pgoff = compound_head(page)->index;
-	pgoff += page - compound_head(page);
-	return pgoff;
+	return head->index + page - head;
 }
 
 extern pgoff_t hugetlb_basepage_index(struct page *page);
diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h
index 5ba475ca9078..f16de399d2de 100644
--- a/include/linux/pci-acpi.h
+++ b/include/linux/pci-acpi.h
@@ -122,6 +122,9 @@ static inline void pci_acpi_add_edr_notifier(struct pci_dev *pdev) { }
 static inline void pci_acpi_remove_edr_notifier(struct pci_dev *pdev) { }
 #endif /* CONFIG_PCIE_EDR */
 
+int pci_acpi_set_companion_lookup_hook(struct acpi_device *(*func)(struct pci_dev *));
+void pci_acpi_clear_companion_lookup_hook(void);
+
 #else	/* CONFIG_ACPI */
 static inline void acpi_pci_add_bus(struct pci_bus *bus) { }
 static inline void acpi_pci_remove_bus(struct pci_bus *bus) { }
diff --git a/include/linux/pci-epc.h b/include/linux/pci-epc.h
index 50a649d33e68..a48778e1a4ee 100644
--- a/include/linux/pci-epc.h
+++ b/include/linux/pci-epc.h
@@ -62,31 +62,32 @@ pci_epc_interface_string(enum pci_epc_interface_type type)
  * @owner: the module owner containing the ops
  */
 struct pci_epc_ops {
-	int	(*write_header)(struct pci_epc *epc, u8 func_no,
+	int	(*write_header)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 				struct pci_epf_header *hdr);
-	int	(*set_bar)(struct pci_epc *epc, u8 func_no,
+	int	(*set_bar)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			   struct pci_epf_bar *epf_bar);
-	void	(*clear_bar)(struct pci_epc *epc, u8 func_no,
+	void	(*clear_bar)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			     struct pci_epf_bar *epf_bar);
-	int	(*map_addr)(struct pci_epc *epc, u8 func_no,
+	int	(*map_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			    phys_addr_t addr, u64 pci_addr, size_t size);
-	void	(*unmap_addr)(struct pci_epc *epc, u8 func_no,
+	void	(*unmap_addr)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			      phys_addr_t addr);
-	int	(*set_msi)(struct pci_epc *epc, u8 func_no, u8 interrupts);
-	int	(*get_msi)(struct pci_epc *epc, u8 func_no);
-	int	(*set_msix)(struct pci_epc *epc, u8 func_no, u16 interrupts,
-			    enum pci_barno, u32 offset);
-	int	(*get_msix)(struct pci_epc *epc, u8 func_no);
-	int	(*raise_irq)(struct pci_epc *epc, u8 func_no,
+	int	(*set_msi)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			   u8 interrupts);
+	int	(*get_msi)(struct pci_epc *epc, u8 func_no, u8 vfunc_no);
+	int	(*set_msix)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+			    u16 interrupts, enum pci_barno, u32 offset);
+	int	(*get_msix)(struct pci_epc *epc, u8 func_no, u8 vfunc_no);
+	int	(*raise_irq)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			     enum pci_epc_irq_type type, u16 interrupt_num);
-	int	(*map_msi_irq)(struct pci_epc *epc, u8 func_no,
+	int	(*map_msi_irq)(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			       phys_addr_t phys_addr, u8 interrupt_num,
 			       u32 entry_size, u32 *msi_data,
 			       u32 *msi_addr_offset);
 	int	(*start)(struct pci_epc *epc);
 	void	(*stop)(struct pci_epc *epc);
 	const struct pci_epc_features* (*get_features)(struct pci_epc *epc,
-						       u8 func_no);
+						       u8 func_no, u8 vfunc_no);
 	struct module *owner;
 };
 
@@ -128,6 +129,8 @@ struct pci_epc_mem {
  *       single window.
  * @num_windows: number of windows supported by device
  * @max_functions: max number of functions that can be configured in this EPC
+ * @max_vfs: Array indicating the maximum number of virtual functions that can
+ *   be associated with each physical function
  * @group: configfs group representing the PCI EPC device
  * @lock: mutex to protect pci_epc ops
  * @function_num_map: bitmap to manage physical function number
@@ -141,6 +144,7 @@ struct pci_epc {
 	struct pci_epc_mem		*mem;
 	unsigned int			num_windows;
 	u8				max_functions;
+	u8				*max_vfs;
 	struct config_group		*group;
 	/* mutex to protect against concurrent access of EP controller */
 	struct mutex			lock;
@@ -208,31 +212,32 @@ void pci_epc_linkup(struct pci_epc *epc);
 void pci_epc_init_notify(struct pci_epc *epc);
 void pci_epc_remove_epf(struct pci_epc *epc, struct pci_epf *epf,
 			enum pci_epc_interface_type type);
-int pci_epc_write_header(struct pci_epc *epc, u8 func_no,
+int pci_epc_write_header(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			 struct pci_epf_header *hdr);
-int pci_epc_set_bar(struct pci_epc *epc, u8 func_no,
+int pci_epc_set_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		    struct pci_epf_bar *epf_bar);
-void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no,
+void pci_epc_clear_bar(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		       struct pci_epf_bar *epf_bar);
-int pci_epc_map_addr(struct pci_epc *epc, u8 func_no,
+int pci_epc_map_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		     phys_addr_t phys_addr,
 		     u64 pci_addr, size_t size);
-void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no,
+void pci_epc_unmap_addr(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			phys_addr_t phys_addr);
-int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 interrupts);
-int pci_epc_get_msi(struct pci_epc *epc, u8 func_no);
-int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u16 interrupts,
-		     enum pci_barno, u32 offset);
-int pci_epc_get_msix(struct pci_epc *epc, u8 func_no);
-int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no,
+int pci_epc_set_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		    u8 interrupts);
+int pci_epc_get_msi(struct pci_epc *epc, u8 func_no, u8 vfunc_no);
+int pci_epc_set_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
+		     u16 interrupts, enum pci_barno, u32 offset);
+int pci_epc_get_msix(struct pci_epc *epc, u8 func_no, u8 vfunc_no);
+int pci_epc_map_msi_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 			phys_addr_t phys_addr, u8 interrupt_num,
 			u32 entry_size, u32 *msi_data, u32 *msi_addr_offset);
-int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no,
+int pci_epc_raise_irq(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
 		      enum pci_epc_irq_type type, u16 interrupt_num);
 int pci_epc_start(struct pci_epc *epc);
 void pci_epc_stop(struct pci_epc *epc);
 const struct pci_epc_features *pci_epc_get_features(struct pci_epc *epc,
-						    u8 func_no);
+						    u8 func_no, u8 vfunc_no);
 enum pci_barno
 pci_epc_get_first_free_bar(const struct pci_epc_features *epc_features);
 enum pci_barno pci_epc_get_next_free_bar(const struct pci_epc_features
diff --git a/include/linux/pci-epf.h b/include/linux/pci-epf.h
index 8292420426f3..009a07147c61 100644
--- a/include/linux/pci-epf.h
+++ b/include/linux/pci-epf.h
@@ -121,8 +121,10 @@ struct pci_epf_bar {
  * @bar: represents the BAR of EPF device
  * @msi_interrupts: number of MSI interrupts required by this function
  * @msix_interrupts: number of MSI-X interrupts required by this function
- * @func_no: unique function number within this endpoint device
+ * @func_no: unique (physical) function number within this endpoint device
+ * @vfunc_no: unique virtual function number within a physical function
  * @epc: the EPC device to which this EPF device is bound
+ * @epf_pf: the physical EPF device to which this virtual EPF device is bound
  * @driver: the EPF driver to which this EPF device is bound
  * @list: to add pci_epf as a list of PCI endpoint functions to pci_epc
  * @nb: notifier block to notify EPF of any EPC events (like linkup)
@@ -133,6 +135,10 @@ struct pci_epf_bar {
  * @sec_epc_bar: represents the BAR of EPF device associated with secondary EPC
  * @sec_epc_func_no: unique (physical) function number within the secondary EPC
  * @group: configfs group associated with the EPF device
+ * @is_bound: indicates if bind notification to function driver has been invoked
+ * @is_vf: true - virtual function, false - physical function
+ * @vfunction_num_map: bitmap to manage virtual function number
+ * @pci_vepf: list of virtual endpoint functions associated with this function
  */
 struct pci_epf {
 	struct device		dev;
@@ -142,8 +148,10 @@ struct pci_epf {
 	u8			msi_interrupts;
 	u16			msix_interrupts;
 	u8			func_no;
+	u8			vfunc_no;
 
 	struct pci_epc		*epc;
+	struct pci_epf		*epf_pf;
 	struct pci_epf_driver	*driver;
 	struct list_head	list;
 	struct notifier_block   nb;
@@ -156,6 +164,10 @@ struct pci_epf {
 	struct pci_epf_bar	sec_epc_bar[6];
 	u8			sec_epc_func_no;
 	struct config_group	*group;
+	unsigned int		is_bound;
+	unsigned int		is_vf;
+	unsigned long		vfunction_num_map;
+	struct list_head	pci_vepf;
 };
 
 /**
@@ -199,4 +211,6 @@ int pci_epf_bind(struct pci_epf *epf);
 void pci_epf_unbind(struct pci_epf *epf);
 struct config_group *pci_epf_type_add_cfs(struct pci_epf *epf,
 					  struct config_group *group);
+int pci_epf_add_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf);
+void pci_epf_remove_vepf(struct pci_epf *epf_pf, struct pci_epf *epf_vf);
 #endif /* __LINUX_PCI_EPF_H */
diff --git a/include/linux/pci.h b/include/linux/pci.h
index 34d7d94ddf6d..cd8aa6fce204 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -49,6 +49,12 @@
 			       PCI_STATUS_SIG_TARGET_ABORT | \
 			       PCI_STATUS_PARITY)
 
+/* Number of reset methods used in pci_reset_fn_methods array in pci.c */
+#define PCI_NUM_RESET_METHODS 7
+
+#define PCI_RESET_PROBE		true
+#define PCI_RESET_DO_RESET	false
+
 /*
  * The PCI interface treats multi-function devices as independent
  * devices.  The slot/function address of each device is encoded
@@ -288,21 +294,14 @@ enum pci_bus_speed {
 enum pci_bus_speed pcie_get_speed_cap(struct pci_dev *dev);
 enum pcie_link_width pcie_get_width_cap(struct pci_dev *dev);
 
-struct pci_cap_saved_data {
-	u16		cap_nr;
-	bool		cap_extended;
-	unsigned int	size;
-	u32		data[];
-};
-
-struct pci_cap_saved_state {
-	struct hlist_node		next;
-	struct pci_cap_saved_data	cap;
+struct pci_vpd {
+	struct mutex	lock;
+	unsigned int	len;
+	u8		cap;
 };
 
 struct irq_affinity;
 struct pcie_link_state;
-struct pci_vpd;
 struct pci_sriov;
 struct pci_p2pdma;
 struct rcec_ea;
@@ -333,6 +332,7 @@ struct pci_dev {
 	struct rcec_ea	*rcec_ea;	/* RCEC cached endpoint association */
 	struct pci_dev  *rcec;          /* Associated RCEC device */
 #endif
+	u32		devcap;		/* PCIe Device Capabilities */
 	u8		pcie_cap;	/* PCIe capability offset */
 	u8		msi_cap;	/* MSI capability offset */
 	u8		msix_cap;	/* MSI-X capability offset */
@@ -388,6 +388,7 @@ struct pci_dev {
 					   supported from root to here */
 	u16		l1ss;		/* L1SS Capability pointer */
 #endif
+	unsigned int	pasid_no_tlp:1;		/* PASID works without TLP Prefix */
 	unsigned int	eetlp_prefix_path:1;	/* End-to-End TLP Prefix */
 
 	pci_channel_state_t error_state;	/* Current connectivity state */
@@ -427,7 +428,6 @@ struct pci_dev {
 	unsigned int	state_saved:1;
 	unsigned int	is_physfn:1;
 	unsigned int	is_virtfn:1;
-	unsigned int	reset_fn:1;
 	unsigned int	is_hotplug_bridge:1;
 	unsigned int	shpc_managed:1;		/* SHPC owned by shpchp */
 	unsigned int	is_thunderbolt:1;	/* Thunderbolt controller */
@@ -473,7 +473,7 @@ struct pci_dev {
 #ifdef CONFIG_PCI_MSI
 	const struct attribute_group **msi_irq_groups;
 #endif
-	struct pci_vpd *vpd;
+	struct pci_vpd	vpd;
 #ifdef CONFIG_PCIE_DPC
 	u16		dpc_cap;
 	unsigned int	dpc_rp_extensions:1;
@@ -505,6 +505,9 @@ struct pci_dev {
 	char		*driver_override; /* Driver name to force a match */
 
 	unsigned long	priv_flags;	/* Private flags for the PCI driver */
+
+	/* These methods index pci_reset_fn_methods[] */
+	u8 reset_methods[PCI_NUM_RESET_METHODS]; /* In priority order */
 };
 
 static inline struct pci_dev *pci_physfn(struct pci_dev *dev)
@@ -526,6 +529,16 @@ static inline int pci_channel_offline(struct pci_dev *pdev)
 	return (pdev->error_state != pci_channel_io_normal);
 }
 
+/*
+ * Currently in ACPI spec, for each PCI host bridge, PCI Segment
+ * Group number is limited to a 16-bit value, therefore (int)-1 is
+ * not a valid PCI domain number, and can be used as a sentinel
+ * value indicating ->domain_nr is not set by the driver (and
+ * CONFIG_PCI_DOMAINS_GENERIC=y archs will set it with
+ * pci_bus_find_domain_nr()).
+ */
+#define PCI_DOMAIN_NR_NOT_SET (-1)
+
 struct pci_host_bridge {
 	struct device	dev;
 	struct pci_bus	*bus;		/* Root bus */
@@ -533,6 +546,7 @@ struct pci_host_bridge {
 	struct pci_ops	*child_ops;
 	void		*sysdata;
 	int		busnr;
+	int		domain_nr;
 	struct list_head windows;	/* resource_entry */
 	struct list_head dma_ranges;	/* dma ranges resource list */
 	u8 (*swizzle_irq)(struct pci_dev *, u8 *); /* Platform IRQ swizzler */
@@ -1257,7 +1271,7 @@ u32 pcie_bandwidth_available(struct pci_dev *dev, struct pci_dev **limiting_dev,
 			     enum pci_bus_speed *speed,
 			     enum pcie_link_width *width);
 void pcie_print_link_status(struct pci_dev *dev);
-bool pcie_has_flr(struct pci_dev *dev);
+int pcie_reset_flr(struct pci_dev *dev, bool probe);
 int pcie_flr(struct pci_dev *dev);
 int __pci_reset_function_locked(struct pci_dev *dev);
 int pci_reset_function(struct pci_dev *dev);
@@ -1307,12 +1321,6 @@ int pci_load_saved_state(struct pci_dev *dev,
 			 struct pci_saved_state *state);
 int pci_load_and_free_saved_state(struct pci_dev *dev,
 				  struct pci_saved_state **state);
-struct pci_cap_saved_state *pci_find_saved_cap(struct pci_dev *dev, char cap);
-struct pci_cap_saved_state *pci_find_saved_ext_cap(struct pci_dev *dev,
-						   u16 cap);
-int pci_add_cap_save_buffer(struct pci_dev *dev, char cap, unsigned int size);
-int pci_add_ext_cap_save_buffer(struct pci_dev *dev,
-				u16 cap, unsigned int size);
 int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state);
 int pci_set_power_state(struct pci_dev *dev, pci_power_t state);
 pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state);
@@ -1779,8 +1787,9 @@ static inline void pci_disable_device(struct pci_dev *dev) { }
 static inline int pcim_enable_device(struct pci_dev *pdev) { return -EIO; }
 static inline int pci_assign_resource(struct pci_dev *dev, int i)
 { return -EBUSY; }
-static inline int __pci_register_driver(struct pci_driver *drv,
-					struct module *owner)
+static inline int __must_check __pci_register_driver(struct pci_driver *drv,
+						     struct module *owner,
+						     const char *mod_name)
 { return 0; }
 static inline int pci_register_driver(struct pci_driver *drv)
 { return 0; }
@@ -1920,9 +1929,7 @@ int pci_iobar_pfn(struct pci_dev *pdev, int bar, struct vm_area_struct *vma);
 #define pci_resource_end(dev, bar)	((dev)->resource[(bar)].end)
 #define pci_resource_flags(dev, bar)	((dev)->resource[(bar)].flags)
 #define pci_resource_len(dev,bar) \
-	((pci_resource_start((dev), (bar)) == 0 &&	\
-	  pci_resource_end((dev), (bar)) ==		\
-	  pci_resource_start((dev), (bar))) ? 0 :	\
+	((pci_resource_end((dev), (bar)) == 0) ? 0 :	\
 							\
 	 (pci_resource_end((dev), (bar)) -		\
 	  pci_resource_start((dev), (bar)) + 1))
@@ -2289,20 +2296,6 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask);
 #define PCI_VPD_LRDT_RO_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RO_DATA)
 #define PCI_VPD_LRDT_RW_DATA		PCI_VPD_LRDT_ID(PCI_VPD_LTIN_RW_DATA)
 
-/* Small Resource Data Type Tag Item Names */
-#define PCI_VPD_STIN_END		0x0f	/* End */
-
-#define PCI_VPD_SRDT_END		(PCI_VPD_STIN_END << 3)
-
-#define PCI_VPD_SRDT_TIN_MASK		0x78
-#define PCI_VPD_SRDT_LEN_MASK		0x07
-#define PCI_VPD_LRDT_TIN_MASK		0x7f
-
-#define PCI_VPD_LRDT_TAG_SIZE		3
-#define PCI_VPD_SRDT_TAG_SIZE		1
-
-#define PCI_VPD_INFO_FLD_HDR_SIZE	3
-
 #define PCI_VPD_RO_KEYWORD_PARTNO	"PN"
 #define PCI_VPD_RO_KEYWORD_SERIALNO	"SN"
 #define PCI_VPD_RO_KEYWORD_MFR_ID	"MN"
@@ -2310,83 +2303,45 @@ int pci_enable_atomic_ops_to_root(struct pci_dev *dev, u32 cap_mask);
 #define PCI_VPD_RO_KEYWORD_CHKSUM	"RV"
 
 /**
- * pci_vpd_lrdt_size - Extracts the Large Resource Data Type length
- * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
- *
- * Returns the extracted Large Resource Data Type length.
- */
-static inline u16 pci_vpd_lrdt_size(const u8 *lrdt)
-{
-	return (u16)lrdt[1] + ((u16)lrdt[2] << 8);
-}
-
-/**
- * pci_vpd_lrdt_tag - Extracts the Large Resource Data Type Tag Item
- * @lrdt: Pointer to the beginning of the Large Resource Data Type tag
- *
- * Returns the extracted Large Resource Data Type Tag item.
- */
-static inline u16 pci_vpd_lrdt_tag(const u8 *lrdt)
-{
-	return (u16)(lrdt[0] & PCI_VPD_LRDT_TIN_MASK);
-}
-
-/**
- * pci_vpd_srdt_size - Extracts the Small Resource Data Type length
- * @srdt: Pointer to the beginning of the Small Resource Data Type tag
- *
- * Returns the extracted Small Resource Data Type length.
- */
-static inline u8 pci_vpd_srdt_size(const u8 *srdt)
-{
-	return (*srdt) & PCI_VPD_SRDT_LEN_MASK;
-}
-
-/**
- * pci_vpd_srdt_tag - Extracts the Small Resource Data Type Tag Item
- * @srdt: Pointer to the beginning of the Small Resource Data Type tag
+ * pci_vpd_alloc - Allocate buffer and read VPD into it
+ * @dev: PCI device
+ * @size: pointer to field where VPD length is returned
  *
- * Returns the extracted Small Resource Data Type Tag Item.
+ * Returns pointer to allocated buffer or an ERR_PTR in case of failure
  */
-static inline u8 pci_vpd_srdt_tag(const u8 *srdt)
-{
-	return ((*srdt) & PCI_VPD_SRDT_TIN_MASK) >> 3;
-}
+void *pci_vpd_alloc(struct pci_dev *dev, unsigned int *size);
 
 /**
- * pci_vpd_info_field_size - Extracts the information field length
- * @info_field: Pointer to the beginning of an information field header
+ * pci_vpd_find_id_string - Locate id string in VPD
+ * @buf: Pointer to buffered VPD data
+ * @len: The length of the buffer area in which to search
+ * @size: Pointer to field where length of id string is returned
  *
- * Returns the extracted information field length.
+ * Returns the index of the id string or -ENOENT if not found.
  */
-static inline u8 pci_vpd_info_field_size(const u8 *info_field)
-{
-	return info_field[2];
-}
+int pci_vpd_find_id_string(const u8 *buf, unsigned int len, unsigned int *size);
 
 /**
- * pci_vpd_find_tag - Locates the Resource Data Type tag provided
- * @buf: Pointer to buffered vpd data
- * @len: The length of the vpd buffer
- * @rdt: The Resource Data Type to search for
+ * pci_vpd_find_ro_info_keyword - Locate info field keyword in VPD RO section
+ * @buf: Pointer to buffered VPD data
+ * @len: The length of the buffer area in which to search
+ * @kw: The keyword to search for
+ * @size: Pointer to field where length of found keyword data is returned
  *
- * Returns the index where the Resource Data Type was found or
- * -ENOENT otherwise.
+ * Returns the index of the information field keyword data or -ENOENT if
+ * not found.
  */
-int pci_vpd_find_tag(const u8 *buf, unsigned int len, u8 rdt);
+int pci_vpd_find_ro_info_keyword(const void *buf, unsigned int len,
+				 const char *kw, unsigned int *size);
 
 /**
- * pci_vpd_find_info_keyword - Locates an information field keyword in the VPD
- * @buf: Pointer to buffered vpd data
- * @off: The offset into the buffer at which to begin the search
- * @len: The length of the buffer area, relative to off, in which to search
- * @kw: The keyword to search for
+ * pci_vpd_check_csum - Check VPD checksum
+ * @buf: Pointer to buffered VPD data
+ * @len: VPD size
  *
- * Returns the index where the information field keyword was found or
- * -ENOENT otherwise.
+ * Returns 1 if VPD has no checksum, otherwise 0 or an errno
  */
-int pci_vpd_find_info_keyword(const u8 *buf, unsigned int off,
-			      unsigned int len, const char *kw);
+int pci_vpd_check_csum(const void *buf, unsigned int len);
 
 /* PCI <-> OF binding helpers */
 #ifdef CONFIG_OF
diff --git a/include/linux/pci_hotplug.h b/include/linux/pci_hotplug.h
index 2dac431d94ac..3a10d6ec3ee7 100644
--- a/include/linux/pci_hotplug.h
+++ b/include/linux/pci_hotplug.h
@@ -44,7 +44,7 @@ struct hotplug_slot_ops {
 	int (*get_attention_status)	(struct hotplug_slot *slot, u8 *value);
 	int (*get_latch_status)		(struct hotplug_slot *slot, u8 *value);
 	int (*get_adapter_status)	(struct hotplug_slot *slot, u8 *value);
-	int (*reset_slot)		(struct hotplug_slot *slot, int probe);
+	int (*reset_slot)		(struct hotplug_slot *slot, bool probe);
 };
 
 /**
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06eccef155ad..011f2f1ea5bb 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2453,7 +2453,8 @@
 #define PCI_VENDOR_ID_TDI               0x192E
 #define PCI_DEVICE_ID_TDI_EHCI          0x0101
 
-#define PCI_VENDOR_ID_FREESCALE		0x1957
+#define PCI_VENDOR_ID_FREESCALE		0x1957	/* duplicate: NXP */
+#define PCI_VENDOR_ID_NXP		0x1957	/* duplicate: FREESCALE */
 #define PCI_DEVICE_ID_MPC8308		0xc006
 #define PCI_DEVICE_ID_MPC8315E		0x00b4
 #define PCI_DEVICE_ID_MPC8315		0x00b5
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index afb3ded0b691..237291196ce2 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -451,6 +451,9 @@ void phylink_mac_change(struct phylink *, bool up);
 void phylink_start(struct phylink *);
 void phylink_stop(struct phylink *);
 
+void phylink_suspend(struct phylink *pl, bool mac_wol);
+void phylink_resume(struct phylink *pl);
+
 void phylink_ethtool_get_wol(struct phylink *, struct ethtool_wolinfo *);
 int phylink_ethtool_set_wol(struct phylink *, struct ethtool_wolinfo *);
 
diff --git a/include/linux/platform_data/dma-dw.h b/include/linux/platform_data/dma-dw.h
index b34a094b2258..860ba4bc5ead 100644
--- a/include/linux/platform_data/dma-dw.h
+++ b/include/linux/platform_data/dma-dw.h
@@ -41,36 +41,39 @@ struct dw_dma_slave {
 
 /**
  * struct dw_dma_platform_data - Controller configuration parameters
+ * @nr_masters: Number of AHB masters supported by the controller
  * @nr_channels: Number of channels supported by hardware (max 8)
  * @chan_allocation_order: Allocate channels starting from 0 or 7
  * @chan_priority: Set channel priority increasing from 0 to 7 or 7 to 0.
  * @block_size: Maximum block size supported by the controller
- * @nr_masters: Number of AHB masters supported by the controller
  * @data_width: Maximum data width supported by hardware per AHB master
  *		(in bytes, power of 2)
  * @multi_block: Multi block transfers supported by hardware per channel.
  * @max_burst: Maximum value of burst transaction size supported by hardware
  *	       per channel (in units of CTL.SRC_TR_WIDTH/CTL.DST_TR_WIDTH).
  * @protctl: Protection control signals setting per channel.
+ * @quirks: Optional platform quirks.
  */
 struct dw_dma_platform_data {
-	unsigned int	nr_channels;
+	u32		nr_masters;
+	u32		nr_channels;
 #define CHAN_ALLOCATION_ASCENDING	0	/* zero to seven */
 #define CHAN_ALLOCATION_DESCENDING	1	/* seven to zero */
-	unsigned char	chan_allocation_order;
+	u32		chan_allocation_order;
 #define CHAN_PRIORITY_ASCENDING		0	/* chan0 highest */
 #define CHAN_PRIORITY_DESCENDING	1	/* chan7 highest */
-	unsigned char	chan_priority;
-	unsigned int	block_size;
-	unsigned char	nr_masters;
-	unsigned char	data_width[DW_DMA_MAX_NR_MASTERS];
-	unsigned char	multi_block[DW_DMA_MAX_NR_CHANNELS];
+	u32		chan_priority;
+	u32		block_size;
+	u32		data_width[DW_DMA_MAX_NR_MASTERS];
+	u32		multi_block[DW_DMA_MAX_NR_CHANNELS];
 	u32		max_burst[DW_DMA_MAX_NR_CHANNELS];
 #define CHAN_PROTCTL_PRIVILEGED		BIT(0)
 #define CHAN_PROTCTL_BUFFERABLE		BIT(1)
 #define CHAN_PROTCTL_CACHEABLE		BIT(2)
 #define CHAN_PROTCTL_MASK		GENMASK(2, 0)
-	unsigned char	protctl;
+	u32		protctl;
+#define DW_DMA_QUIRK_XBAR_PRESENT	BIT(0)
+	u32		quirks;
 };
 
 #endif /* _PLATFORM_DATA_DMA_DW_H */
diff --git a/include/linux/platform_data/gpio-dwapb.h b/include/linux/platform_data/gpio-dwapb.h
deleted file mode 100644
index 0aa5c6720259..000000000000
--- a/include/linux/platform_data/gpio-dwapb.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2014 Intel Corporation.
- */
-
-#ifndef GPIO_DW_APB_H
-#define GPIO_DW_APB_H
-
-#define DWAPB_MAX_GPIOS		32
-
-struct dwapb_port_property {
-	struct fwnode_handle *fwnode;
-	unsigned int	idx;
-	unsigned int	ngpio;
-	unsigned int	gpio_base;
-	int		irq[DWAPB_MAX_GPIOS];
-	bool		irq_shared;
-};
-
-struct dwapb_platform_data {
-	struct dwapb_port_property *properties;
-	unsigned int nports;
-};
-
-#endif
diff --git a/include/linux/pwm.h b/include/linux/pwm.h
index a0b7e43049d5..725c9b784e60 100644
--- a/include/linux/pwm.h
+++ b/include/linux/pwm.h
@@ -404,7 +404,7 @@ int pwm_set_chip_data(struct pwm_device *pwm, void *data);
 void *pwm_get_chip_data(struct pwm_device *pwm);
 
 int pwmchip_add(struct pwm_chip *chip);
-int pwmchip_remove(struct pwm_chip *chip);
+void pwmchip_remove(struct pwm_chip *chip);
 
 int devm_pwmchip_add(struct device *dev, struct pwm_chip *chip);
 
diff --git a/include/linux/qcom_scm.h b/include/linux/qcom_scm.h
index 0165824c5128..c0475d1c9885 100644
--- a/include/linux/qcom_scm.h
+++ b/include/linux/qcom_scm.h
@@ -109,6 +109,12 @@ extern int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 			     u32 *resp);
 
 extern int qcom_scm_qsmmu500_wait_safe_toggle(bool en);
+
+extern int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+			      u64 limit_node, u32 node_id, u64 version);
+extern int qcom_scm_lmh_profile_change(u32 profile_id);
+extern bool qcom_scm_lmh_dcvsh_available(void);
+
 #else
 
 #include <linux/errno.h>
@@ -170,5 +176,13 @@ static inline int qcom_scm_hdcp_req(struct qcom_scm_hdcp_req *req, u32 req_cnt,
 
 static inline int qcom_scm_qsmmu500_wait_safe_toggle(bool en)
 		{ return -ENODEV; }
+
+static inline int qcom_scm_lmh_dcvsh(u32 payload_fn, u32 payload_reg, u32 payload_val,
+				     u64 limit_node, u32 node_id, u64 version)
+		{ return -ENODEV; }
+
+static inline int qcom_scm_lmh_profile_change(u32 profile_id) { return -ENODEV; }
+
+static inline bool qcom_scm_lmh_dcvsh_available(void) { return -ENODEV; }
 #endif
 #endif
diff --git a/include/linux/remoteproc.h b/include/linux/remoteproc.h
index a5b37bc10865..83c09ac36b13 100644
--- a/include/linux/remoteproc.h
+++ b/include/linux/remoteproc.h
@@ -369,9 +369,8 @@ enum rsc_handling_status {
  * @da_to_va:	optional platform hook to perform address translations
  * @parse_fw:	parse firmware to extract information (e.g. resource table)
  * @handle_rsc:	optional platform hook to handle vendor resources. Should return
- * RSC_HANDLED if resource was handled, RSC_IGNORED if not handled and a
- * negative value on error
- * @load_rsc_table:	load resource table from firmware image
+ *		RSC_HANDLED if resource was handled, RSC_IGNORED if not handled
+ *		and a negative value on error
  * @find_loaded_rsc_table: find the loaded resource table from firmware image
  * @get_loaded_rsc_table: get resource table installed in memory
  *			  by external entity
diff --git a/include/linux/sched/user.h b/include/linux/sched/user.h
index 2462f7d07695..00ed419dd464 100644
--- a/include/linux/sched/user.h
+++ b/include/linux/sched/user.h
@@ -4,6 +4,7 @@
 
 #include <linux/uidgid.h>
 #include <linux/atomic.h>
+#include <linux/percpu_counter.h>
 #include <linux/refcount.h>
 #include <linux/ratelimit.h>
 
@@ -13,7 +14,7 @@
 struct user_struct {
 	refcount_t __count;	/* reference count */
 #ifdef CONFIG_EPOLL
-	atomic_long_t epoll_watches; /* The number of file descriptors currently watched */
+	struct percpu_counter epoll_watches; /* The number of file descriptors currently watched */
 #endif
 	unsigned long unix_inflight;	/* How many files in flight in unix sockets */
 	atomic_long_t pipe_bufs;  /* how many pages are allocated in pipe buffers */
diff --git a/include/linux/slub_def.h b/include/linux/slub_def.h
index dcde82a4434c..85499f0586b0 100644
--- a/include/linux/slub_def.h
+++ b/include/linux/slub_def.h
@@ -10,6 +10,7 @@
 #include <linux/kfence.h>
 #include <linux/kobject.h>
 #include <linux/reciprocal_div.h>
+#include <linux/local_lock.h>
 
 enum stat_item {
 	ALLOC_FASTPATH,		/* Allocation from cpu slab */
@@ -40,6 +41,10 @@ enum stat_item {
 	CPU_PARTIAL_DRAIN,	/* Drain cpu partial to node partial */
 	NR_SLUB_STAT_ITEMS };
 
+/*
+ * When changing the layout, make sure freelist and tid are still compatible
+ * with this_cpu_cmpxchg_double() alignment requirements.
+ */
 struct kmem_cache_cpu {
 	void **freelist;	/* Pointer to next available object */
 	unsigned long tid;	/* Globally unique transaction id */
@@ -47,6 +52,7 @@ struct kmem_cache_cpu {
 #ifdef CONFIG_SLUB_CPU_PARTIAL
 	struct page *partial;	/* Partially allocated frozen slabs */
 #endif
+	local_lock_t lock;	/* Protects the fields above */
 #ifdef CONFIG_SLUB_STATS
 	unsigned stat[NR_SLUB_STAT_ITEMS];
 #endif
diff --git a/include/linux/soc/marvell/octeontx2/asm.h b/include/linux/soc/marvell/octeontx2/asm.h
index 28c04d918f0f..fa1d6af0164e 100644
--- a/include/linux/soc/marvell/octeontx2/asm.h
+++ b/include/linux/soc/marvell/octeontx2/asm.h
@@ -22,12 +22,17 @@
 			 : [rs]"r" (ioaddr));           \
 	(result);                                       \
 })
+/*
+ * STEORL store to memory with release semantics.
+ * This will avoid using DMB barrier after each LMTST
+ * operation.
+ */
 #define cn10k_lmt_flush(val, addr)			\
 ({							\
 	__asm__ volatile(".cpu  generic+lse\n"		\
-			 "steor %x[rf],[%[rs]]"		\
-			 : [rf]"+r"(val)		\
-			 : [rs]"r"(addr));		\
+			 "steorl %x[rf],[%[rs]]"		\
+			 : [rf] "+r"(val)		\
+			 : [rs] "r"(addr));		\
 })
 #else
 #define otx2_lmt_flush(ioaddr)          ({ 0; })
diff --git a/include/linux/spi/max7301.h b/include/linux/spi/max7301.h
index 433c20e2f46e..21449067aedb 100644
--- a/include/linux/spi/max7301.h
+++ b/include/linux/spi/max7301.h
@@ -2,7 +2,7 @@
 #ifndef LINUX_SPI_MAX7301_H
 #define LINUX_SPI_MAX7301_H
 
-#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
 
 /*
  * Some registers must be read back to modify.
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 60a3ab0ad2cc..252243c7783d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -1373,6 +1373,9 @@ long ksys_old_shmctl(int shmid, int cmd, struct shmid_ds __user *buf);
 long compat_ksys_semtimedop(int semid, struct sembuf __user *tsems,
 			    unsigned int nsops,
 			    const struct old_timespec32 __user *timeout);
+long __do_semtimedop(int semid, struct sembuf *tsems, unsigned int nsops,
+		     const struct timespec64 *timeout,
+		     struct ipc_namespace *ns);
 
 int __sys_getsockopt(int fd, int level, int optname, char __user *optval,
 		int __user *optlen);
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index d296f3b88fb9..c314893970b3 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -285,7 +285,7 @@ struct thermal_zone_params {
 };
 
 /**
- * struct thermal_zone_of_device_ops - scallbacks for handling DT based zones
+ * struct thermal_zone_of_device_ops - callbacks for handling DT based zones
  *
  * Mandatory:
  * @get_temp: a pointer to a function that reads the sensor temperature.
@@ -404,12 +404,13 @@ static inline void thermal_zone_device_unregister(
 	struct thermal_zone_device *tz)
 { }
 static inline struct thermal_cooling_device *
-thermal_cooling_device_register(char *type, void *devdata,
+thermal_cooling_device_register(const char *type, void *devdata,
 	const struct thermal_cooling_device_ops *ops)
 { return ERR_PTR(-ENODEV); }
 static inline struct thermal_cooling_device *
 thermal_of_cooling_device_register(struct device_node *np,
-	char *type, void *devdata, const struct thermal_cooling_device_ops *ops)
+	const char *type, void *devdata,
+	const struct thermal_cooling_device_ops *ops)
 { return ERR_PTR(-ENODEV); }
 static inline struct thermal_cooling_device *
 devm_thermal_of_cooling_device_register(struct device *dev,
diff --git a/include/linux/threads.h b/include/linux/threads.h
index 18d5a74bcc3d..c34173e6c5f1 100644
--- a/include/linux/threads.h
+++ b/include/linux/threads.h
@@ -38,7 +38,7 @@
  * Define a minimum number of pids per cpu.  Heuristically based
  * on original pid max of 32k for 32 cpus.  Also, increase the
  * minimum settable value for pid_max on the running system based
- * on similar defaults.  See kernel/pid.c:pidmap_init() for details.
+ * on similar defaults.  See kernel/pid.c:pid_idr_init() for details.
  */
 #define PIDS_PER_CPU_DEFAULT	1024
 #define PIDS_PER_CPU_MIN	8
diff --git a/include/linux/trace_events.h b/include/linux/trace_events.h
index 8e0631a4b046..3e475eeb5a99 100644
--- a/include/linux/trace_events.h
+++ b/include/linux/trace_events.h
@@ -310,8 +310,10 @@ enum {
 	TRACE_EVENT_FL_NO_SET_FILTER_BIT,
 	TRACE_EVENT_FL_IGNORE_ENABLE_BIT,
 	TRACE_EVENT_FL_TRACEPOINT_BIT,
+	TRACE_EVENT_FL_DYNAMIC_BIT,
 	TRACE_EVENT_FL_KPROBE_BIT,
 	TRACE_EVENT_FL_UPROBE_BIT,
+	TRACE_EVENT_FL_EPROBE_BIT,
 };
 
 /*
@@ -321,8 +323,10 @@ enum {
  *  NO_SET_FILTER - Set when filter has error and is to be ignored
  *  IGNORE_ENABLE - For trace internal events, do not enable with debugfs file
  *  TRACEPOINT    - Event is a tracepoint
+ *  DYNAMIC       - Event is a dynamic event (created at run time)
  *  KPROBE        - Event is a kprobe
  *  UPROBE        - Event is a uprobe
+ *  EPROBE        - Event is an event probe
  */
 enum {
 	TRACE_EVENT_FL_FILTERED		= (1 << TRACE_EVENT_FL_FILTERED_BIT),
@@ -330,8 +334,10 @@ enum {
 	TRACE_EVENT_FL_NO_SET_FILTER	= (1 << TRACE_EVENT_FL_NO_SET_FILTER_BIT),
 	TRACE_EVENT_FL_IGNORE_ENABLE	= (1 << TRACE_EVENT_FL_IGNORE_ENABLE_BIT),
 	TRACE_EVENT_FL_TRACEPOINT	= (1 << TRACE_EVENT_FL_TRACEPOINT_BIT),
+	TRACE_EVENT_FL_DYNAMIC		= (1 << TRACE_EVENT_FL_DYNAMIC_BIT),
 	TRACE_EVENT_FL_KPROBE		= (1 << TRACE_EVENT_FL_KPROBE_BIT),
 	TRACE_EVENT_FL_UPROBE		= (1 << TRACE_EVENT_FL_UPROBE_BIT),
+	TRACE_EVENT_FL_EPROBE		= (1 << TRACE_EVENT_FL_EPROBE_BIT),
 };
 
 #define TRACE_EVENT_FL_UKPROBE (TRACE_EVENT_FL_KPROBE | TRACE_EVENT_FL_UPROBE)
@@ -347,7 +353,14 @@ struct trace_event_call {
 	struct trace_event	event;
 	char			*print_fmt;
 	struct event_filter	*filter;
-	void			*mod;
+	/*
+	 * Static events can disappear with modules,
+	 * where as dynamic ones need their own ref count.
+	 */
+	union {
+		void				*module;
+		atomic_t			refcnt;
+	};
 	void			*data;
 
 	/* See the TRACE_EVENT_FL_* flags above */
@@ -363,6 +376,42 @@ struct trace_event_call {
 #endif
 };
 
+#ifdef CONFIG_DYNAMIC_EVENTS
+bool trace_event_dyn_try_get_ref(struct trace_event_call *call);
+void trace_event_dyn_put_ref(struct trace_event_call *call);
+bool trace_event_dyn_busy(struct trace_event_call *call);
+#else
+static inline bool trace_event_dyn_try_get_ref(struct trace_event_call *call)
+{
+	/* Without DYNAMIC_EVENTS configured, nothing should be calling this */
+	return false;
+}
+static inline void trace_event_dyn_put_ref(struct trace_event_call *call)
+{
+}
+static inline bool trace_event_dyn_busy(struct trace_event_call *call)
+{
+	/* Nothing should call this without DYNAIMIC_EVENTS configured. */
+	return true;
+}
+#endif
+
+static inline bool trace_event_try_get_ref(struct trace_event_call *call)
+{
+	if (call->flags & TRACE_EVENT_FL_DYNAMIC)
+		return trace_event_dyn_try_get_ref(call);
+	else
+		return try_module_get(call->module);
+}
+
+static inline void trace_event_put_ref(struct trace_event_call *call)
+{
+	if (call->flags & TRACE_EVENT_FL_DYNAMIC)
+		trace_event_dyn_put_ref(call);
+	else
+		module_put(call->module);
+}
+
 #ifdef CONFIG_PERF_EVENTS
 static inline bool bpf_prog_array_valid(struct trace_event_call *call)
 {
@@ -634,6 +683,7 @@ enum event_trigger_type {
 	ETT_EVENT_ENABLE	= (1 << 3),
 	ETT_EVENT_HIST		= (1 << 4),
 	ETT_HIST_ENABLE		= (1 << 5),
+	ETT_EVENT_EPROBE	= (1 << 6),
 };
 
 extern int filter_match_preds(struct event_filter *filter, void *rec);
diff --git a/include/linux/tracepoint.h b/include/linux/tracepoint.h
index ab58696d0ddd..28031b15f878 100644
--- a/include/linux/tracepoint.h
+++ b/include/linux/tracepoint.h
@@ -475,7 +475,7 @@ static inline struct tracepoint *tracepoint_ptr_deref(tracepoint_ptr_t *p)
  *	*
  *	* The declared 'local variable' is called '__entry'
  *	*
- *	* __field(pid_t, prev_prid) is equivalent to a standard declaration:
+ *	* __field(pid_t, prev_pid) is equivalent to a standard declaration:
  *	*
  *	*	pid_t	prev_pid;
  *	*
diff --git a/include/linux/uaccess.h b/include/linux/uaccess.h
index c05e903cef02..ac0394087f7d 100644
--- a/include/linux/uaccess.h
+++ b/include/linux/uaccess.h
@@ -200,16 +200,6 @@ copy_to_user(void __user *to, const void *from, unsigned long n)
 		n = _copy_to_user(to, from, n);
 	return n;
 }
-#ifdef CONFIG_COMPAT
-static __always_inline unsigned long __must_check
-copy_in_user(void __user *to, const void __user *from, unsigned long n)
-{
-	might_fault();
-	if (access_ok(to, n) && access_ok(from, n))
-		n = raw_copy_in_user(to, from, n);
-	return n;
-}
-#endif
 
 #ifndef copy_mc_to_kernel
 /*
diff --git a/include/linux/uio.h b/include/linux/uio.h
index 82c3c3e819e0..5265024e8b90 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -47,6 +47,7 @@ struct iov_iter {
 		};
 		loff_t xarray_start;
 	};
+	size_t truncated;
 };
 
 static inline enum iter_type iov_iter_type(const struct iov_iter *i)
@@ -254,8 +255,10 @@ static inline void iov_iter_truncate(struct iov_iter *i, u64 count)
 	 * conversion in assignement is by definition greater than all
 	 * values of size_t, including old i->count.
 	 */
-	if (i->count > count)
+	if (i->count > count) {
+		i->truncated += i->count - count;
 		i->count = count;
+	}
 }
 
 /*
@@ -264,6 +267,7 @@ static inline void iov_iter_truncate(struct iov_iter *i, u64 count)
  */
 static inline void iov_iter_reexpand(struct iov_iter *i, size_t count)
 {
+	i->truncated -= count - i->count;
 	i->count = count;
 }
 
diff --git a/include/linux/units.h b/include/linux/units.h
index 4a25e0cc8fb3..681fc652e3d7 100644
--- a/include/linux/units.h
+++ b/include/linux/units.h
@@ -20,9 +20,13 @@
 #define PICO	1000000000000ULL
 #define FEMTO	1000000000000000ULL
 
-#define MILLIWATT_PER_WATT	1000L
-#define MICROWATT_PER_MILLIWATT	1000L
-#define MICROWATT_PER_WATT	1000000L
+#define HZ_PER_KHZ		1000UL
+#define KHZ_PER_MHZ		1000UL
+#define HZ_PER_MHZ		1000000UL
+
+#define MILLIWATT_PER_WATT	1000UL
+#define MICROWATT_PER_MILLIWATT	1000UL
+#define MICROWATT_PER_WATT	1000000UL
 
 #define ABSOLUTE_ZERO_MILLICELSIUS -273150
 
diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h
index 2644425b6dce..671d402c3778 100644
--- a/include/linux/vmalloc.h
+++ b/include/linux/vmalloc.h
@@ -225,9 +225,6 @@ static inline bool is_vm_area_hugepages(const void *addr)
 }
 
 #ifdef CONFIG_MMU
-int vmap_range(unsigned long addr, unsigned long end,
-			phys_addr_t phys_addr, pgprot_t prot,
-			unsigned int max_page_shift);
 void vunmap_range(unsigned long addr, unsigned long end);
 static inline void set_vm_flush_reset_perms(void *addr)
 {
diff --git a/include/linux/watchdog.h b/include/linux/watchdog.h
index 9b19e6bb68b5..99660197a36c 100644
--- a/include/linux/watchdog.h
+++ b/include/linux/watchdog.h
@@ -107,6 +107,7 @@ struct watchdog_device {
 	unsigned int max_hw_heartbeat_ms;
 	struct notifier_block reboot_nb;
 	struct notifier_block restart_nb;
+	struct notifier_block pm_nb;
 	void *driver_data;
 	struct watchdog_core_data *wd_data;
 	unsigned long status;
@@ -116,6 +117,7 @@ struct watchdog_device {
 #define WDOG_STOP_ON_REBOOT	2	/* Should be stopped on reboot */
 #define WDOG_HW_RUNNING		3	/* True if HW watchdog running */
 #define WDOG_STOP_ON_UNREGISTER	4	/* Should be stopped on unregister */
+#define WDOG_NO_PING_ON_SUSPEND	5	/* Ping worker should be stopped on suspend */
 	struct list_head deferred;
 };
 
@@ -156,6 +158,12 @@ static inline void watchdog_stop_on_unregister(struct watchdog_device *wdd)
 	set_bit(WDOG_STOP_ON_UNREGISTER, &wdd->status);
 }
 
+/* Use the following function to stop the wdog ping worker when suspending */
+static inline void watchdog_stop_ping_on_suspend(struct watchdog_device *wdd)
+{
+	set_bit(WDOG_NO_PING_ON_SUSPEND, &wdd->status);
+}
+
 /* Use the following function to check if a timeout value is invalid */
 static inline bool watchdog_timeout_invalid(struct watchdog_device *wdd, unsigned int t)
 {
@@ -209,6 +217,8 @@ extern int watchdog_init_timeout(struct watchdog_device *wdd,
 				  unsigned int timeout_parm, struct device *dev);
 extern int watchdog_register_device(struct watchdog_device *);
 extern void watchdog_unregister_device(struct watchdog_device *);
+int watchdog_dev_suspend(struct watchdog_device *wdd);
+int watchdog_dev_resume(struct watchdog_device *wdd);
 
 int watchdog_set_last_hw_keepalive(struct watchdog_device *, unsigned int);
 
diff --git a/include/net/flow.h b/include/net/flow.h
index 6f5e70240071..58beb16a49b8 100644
--- a/include/net/flow.h
+++ b/include/net/flow.h
@@ -194,7 +194,7 @@ static inline struct flowi *flowi4_to_flowi(struct flowi4 *fl4)
 
 static inline struct flowi_common *flowi4_to_flowi_common(struct flowi4 *fl4)
 {
-	return &(flowi4_to_flowi(fl4)->u.__fl_common);
+	return &(fl4->__fl_common);
 }
 
 static inline struct flowi *flowi6_to_flowi(struct flowi6 *fl6)
@@ -204,7 +204,7 @@ static inline struct flowi *flowi6_to_flowi(struct flowi6 *fl6)
 
 static inline struct flowi_common *flowi6_to_flowi_common(struct flowi6 *fl6)
 {
-	return &(flowi6_to_flowi(fl6)->u.__fl_common);
+	return &(fl6->__fl_common);
 }
 
 static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn)
diff --git a/include/trace/events/damon.h b/include/trace/events/damon.h
new file mode 100644
index 000000000000..2f422f4f1fb9
--- /dev/null
+++ b/include/trace/events/damon.h
@@ -0,0 +1,43 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM damon
+
+#if !defined(_TRACE_DAMON_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_DAMON_H
+
+#include <linux/damon.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(damon_aggregated,
+
+	TP_PROTO(struct damon_target *t, struct damon_region *r,
+		unsigned int nr_regions),
+
+	TP_ARGS(t, r, nr_regions),
+
+	TP_STRUCT__entry(
+		__field(unsigned long, target_id)
+		__field(unsigned int, nr_regions)
+		__field(unsigned long, start)
+		__field(unsigned long, end)
+		__field(unsigned int, nr_accesses)
+	),
+
+	TP_fast_assign(
+		__entry->target_id = t->id;
+		__entry->nr_regions = nr_regions;
+		__entry->start = r->ar.start;
+		__entry->end = r->ar.end;
+		__entry->nr_accesses = r->nr_accesses;
+	),
+
+	TP_printk("target_id=%lu nr_regions=%u %lu-%lu: %u",
+			__entry->target_id, __entry->nr_regions,
+			__entry->start, __entry->end, __entry->nr_accesses)
+);
+
+#endif /* _TRACE_DAMON_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
diff --git a/include/trace/events/io_uring.h b/include/trace/events/io_uring.h
index e4e44a2b4aa9..0dd30de00e5b 100644
--- a/include/trace/events/io_uring.h
+++ b/include/trace/events/io_uring.h
@@ -295,14 +295,14 @@ TRACE_EVENT(io_uring_fail_link,
  */
 TRACE_EVENT(io_uring_complete,
 
-	TP_PROTO(void *ctx, u64 user_data, long res, unsigned cflags),
+	TP_PROTO(void *ctx, u64 user_data, int res, unsigned cflags),
 
 	TP_ARGS(ctx, user_data, res, cflags),
 
 	TP_STRUCT__entry (
 		__field(  void *,	ctx		)
 		__field(  u64,		user_data	)
-		__field(  long,		res		)
+		__field(  int,		res		)
 		__field(  unsigned,	cflags		)
 	),
 
@@ -313,7 +313,7 @@ TRACE_EVENT(io_uring_complete,
 		__entry->cflags		= cflags;
 	),
 
-	TP_printk("ring %p, user_data 0x%llx, result %ld, cflags %x",
+	TP_printk("ring %p, user_data 0x%llx, result %d, cflags %x",
 			  __entry->ctx, (unsigned long long)__entry->user_data,
 			  __entry->res, __entry->cflags)
 );
diff --git a/include/trace/events/mmflags.h b/include/trace/events/mmflags.h
index 0b53e855c4ac..116ed4d5d0f8 100644
--- a/include/trace/events/mmflags.h
+++ b/include/trace/events/mmflags.h
@@ -75,7 +75,7 @@
 #define IF_HAVE_PG_HWPOISON(flag,string)
 #endif
 
-#if defined(CONFIG_IDLE_PAGE_TRACKING) && defined(CONFIG_64BIT)
+#if defined(CONFIG_PAGE_IDLE_FLAG) && defined(CONFIG_64BIT)
 #define IF_HAVE_PG_IDLE(flag,string) ,{1UL << flag, string}
 #else
 #define IF_HAVE_PG_IDLE(flag,string)
diff --git a/include/trace/events/page_ref.h b/include/trace/events/page_ref.h
index 5d2ea93956ce..8a99c1cd417b 100644
--- a/include/trace/events/page_ref.h
+++ b/include/trace/events/page_ref.h
@@ -38,7 +38,7 @@ DECLARE_EVENT_CLASS(page_ref_mod_template,
 
 	TP_printk("pfn=0x%lx flags=%s count=%d mapcount=%d mapping=%p mt=%d val=%d",
 		__entry->pfn,
-		show_page_flags(__entry->flags & ((1UL << NR_PAGEFLAGS) - 1)),
+		show_page_flags(__entry->flags & PAGEFLAGS_MASK),
 		__entry->count,
 		__entry->mapcount, __entry->mapping, __entry->mt,
 		__entry->val)
@@ -88,7 +88,7 @@ DECLARE_EVENT_CLASS(page_ref_mod_and_test_template,
 
 	TP_printk("pfn=0x%lx flags=%s count=%d mapcount=%d mapping=%p mt=%d val=%d ret=%d",
 		__entry->pfn,
-		show_page_flags(__entry->flags & ((1UL << NR_PAGEFLAGS) - 1)),
+		show_page_flags(__entry->flags & PAGEFLAGS_MASK),
 		__entry->count,
 		__entry->mapcount, __entry->mapping, __entry->mt,
 		__entry->val, __entry->ret)
diff --git a/include/uapi/asm-generic/unistd.h b/include/uapi/asm-generic/unistd.h
index 14c8fe863c6d..1c5fb86d455a 100644
--- a/include/uapi/asm-generic/unistd.h
+++ b/include/uapi/asm-generic/unistd.h
@@ -673,15 +673,15 @@ __SYSCALL(__NR_madvise, sys_madvise)
 #define __NR_remap_file_pages 234
 __SYSCALL(__NR_remap_file_pages, sys_remap_file_pages)
 #define __NR_mbind 235
-__SC_COMP(__NR_mbind, sys_mbind, compat_sys_mbind)
+__SYSCALL(__NR_mbind, sys_mbind)
 #define __NR_get_mempolicy 236
-__SC_COMP(__NR_get_mempolicy, sys_get_mempolicy, compat_sys_get_mempolicy)
+__SYSCALL(__NR_get_mempolicy, sys_get_mempolicy)
 #define __NR_set_mempolicy 237
-__SC_COMP(__NR_set_mempolicy, sys_set_mempolicy, compat_sys_set_mempolicy)
+__SYSCALL(__NR_set_mempolicy, sys_set_mempolicy)
 #define __NR_migrate_pages 238
-__SC_COMP(__NR_migrate_pages, sys_migrate_pages, compat_sys_migrate_pages)
+__SYSCALL(__NR_migrate_pages, sys_migrate_pages)
 #define __NR_move_pages 239
-__SC_COMP(__NR_move_pages, sys_move_pages, compat_sys_move_pages)
+__SYSCALL(__NR_move_pages, sys_move_pages)
 #endif
 
 #define __NR_rt_tgsigqueueinfo 240
diff --git a/include/uapi/linux/cxl_mem.h b/include/uapi/linux/cxl_mem.h
index f6e8a005b113..8d206f27bb6d 100644
--- a/include/uapi/linux/cxl_mem.h
+++ b/include/uapi/linux/cxl_mem.h
@@ -50,7 +50,7 @@ enum { CXL_CMDS };
 #define ___C(a, b) { b }
 static const struct {
 	const char *name;
-} cxl_command_names[] = { CXL_CMDS };
+} cxl_command_names[] __attribute__((__unused__)) = { CXL_CMDS };
 
 /*
  * Here's how this actually breaks out:
diff --git a/include/uapi/linux/idxd.h b/include/uapi/linux/idxd.h
index edc346a77c91..c750eac09fc9 100644
--- a/include/uapi/linux/idxd.h
+++ b/include/uapi/linux/idxd.h
@@ -9,6 +9,30 @@
 #include <stdint.h>
 #endif
 
+/* Driver command error status */
+enum idxd_scmd_stat {
+	IDXD_SCMD_DEV_ENABLED = 0x80000010,
+	IDXD_SCMD_DEV_NOT_ENABLED = 0x80000020,
+	IDXD_SCMD_WQ_ENABLED = 0x80000021,
+	IDXD_SCMD_DEV_DMA_ERR = 0x80020000,
+	IDXD_SCMD_WQ_NO_GRP = 0x80030000,
+	IDXD_SCMD_WQ_NO_NAME = 0x80040000,
+	IDXD_SCMD_WQ_NO_SVM = 0x80050000,
+	IDXD_SCMD_WQ_NO_THRESH = 0x80060000,
+	IDXD_SCMD_WQ_PORTAL_ERR = 0x80070000,
+	IDXD_SCMD_WQ_RES_ALLOC_ERR = 0x80080000,
+	IDXD_SCMD_PERCPU_ERR = 0x80090000,
+	IDXD_SCMD_DMA_CHAN_ERR = 0x800a0000,
+	IDXD_SCMD_CDEV_ERR = 0x800b0000,
+	IDXD_SCMD_WQ_NO_SWQ_SUPPORT = 0x800c0000,
+	IDXD_SCMD_WQ_NONE_CONFIGURED = 0x800d0000,
+	IDXD_SCMD_WQ_NO_SIZE = 0x800e0000,
+	IDXD_SCMD_WQ_NO_PRIV = 0x800f0000,
+};
+
+#define IDXD_SCMD_SOFTERR_MASK	0x80000000
+#define IDXD_SCMD_SOFTERR_SHIFT	16
+
 /* Descriptor flags */
 #define IDXD_OP_FLAG_FENCE	0x0001
 #define IDXD_OP_FLAG_BOF	0x0002
diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h
index d9e4aabcb31a..a067410ebea5 100644
--- a/include/uapi/linux/kvm.h
+++ b/include/uapi/linux/kvm.h
@@ -1965,7 +1965,9 @@ struct kvm_stats_header {
 #define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
 #define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
 #define KVM_STATS_TYPE_PEAK		(0x2 << KVM_STATS_TYPE_SHIFT)
-#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_PEAK
+#define KVM_STATS_TYPE_LINEAR_HIST	(0x3 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_LOG_HIST		(0x4 << KVM_STATS_TYPE_SHIFT)
+#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_LOG_HIST
 
 #define KVM_STATS_UNIT_SHIFT		4
 #define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
@@ -1988,8 +1990,9 @@ struct kvm_stats_header {
  * @size: The number of data items for this stats.
  *        Every data item is of type __u64.
  * @offset: The offset of the stats to the start of stat structure in
- *          struture kvm or kvm_vcpu.
- * @unused: Unused field for future usage. Always 0 for now.
+ *          structure kvm or kvm_vcpu.
+ * @bucket_size: A parameter value used for histogram stats. It is only used
+ *		for linear histogram stats, specifying the size of the bucket;
  * @name: The name string for the stats. Its size is indicated by the
  *        &kvm_stats_header->name_size.
  */
@@ -1998,7 +2001,7 @@ struct kvm_stats_desc {
 	__s16 exponent;
 	__u16 size;
 	__u32 offset;
-	__u32 unused;
+	__u32 bucket_size;
 	char name[];
 };
 
diff --git a/include/uapi/linux/netfilter/nfnetlink_conntrack.h b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
index c6e6d7d7d538..c2ac7269acf7 100644
--- a/include/uapi/linux/netfilter/nfnetlink_conntrack.h
+++ b/include/uapi/linux/netfilter/nfnetlink_conntrack.h
@@ -258,6 +258,7 @@ enum ctattr_stats_cpu {
 	CTA_STATS_ERROR,
 	CTA_STATS_SEARCH_RESTART,
 	CTA_STATS_CLASH_RESOLVE,
+	CTA_STATS_CHAIN_TOOLONG,
 	__CTA_STATS_MAX,
 };
 #define CTA_STATS_MAX (__CTA_STATS_MAX - 1)
diff --git a/include/uapi/linux/pkt_sched.h b/include/uapi/linux/pkt_sched.h
index 79a699f106b1..ec88590b3198 100644
--- a/include/uapi/linux/pkt_sched.h
+++ b/include/uapi/linux/pkt_sched.h
@@ -827,6 +827,8 @@ struct tc_codel_xstats {
 
 /* FQ_CODEL */
 
+#define FQ_CODEL_QUANTUM_MAX (1 << 20)
+
 enum {
 	TCA_FQ_CODEL_UNSPEC,
 	TCA_FQ_CODEL_TARGET,
diff --git a/include/uapi/linux/virtio_gpio.h b/include/uapi/linux/virtio_gpio.h
new file mode 100644
index 000000000000..0445f905d8cc
--- /dev/null
+++ b/include/uapi/linux/virtio_gpio.h
@@ -0,0 +1,47 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _LINUX_VIRTIO_GPIO_H
+#define _LINUX_VIRTIO_GPIO_H
+
+#include <linux/types.h>
+
+/* Virtio GPIO request types */
+#define VIRTIO_GPIO_MSG_GET_NAMES		0x0001
+#define VIRTIO_GPIO_MSG_GET_DIRECTION		0x0002
+#define VIRTIO_GPIO_MSG_SET_DIRECTION		0x0003
+#define VIRTIO_GPIO_MSG_GET_VALUE		0x0004
+#define VIRTIO_GPIO_MSG_SET_VALUE		0x0005
+
+/* Possible values of the status field */
+#define VIRTIO_GPIO_STATUS_OK			0x0
+#define VIRTIO_GPIO_STATUS_ERR			0x1
+
+/* Direction types */
+#define VIRTIO_GPIO_DIRECTION_NONE		0x00
+#define VIRTIO_GPIO_DIRECTION_OUT		0x01
+#define VIRTIO_GPIO_DIRECTION_IN		0x02
+
+struct virtio_gpio_config {
+	__le16 ngpio;
+	__u8 padding[2];
+	__le32 gpio_names_size;
+} __packed;
+
+/* Virtio GPIO Request / Response */
+struct virtio_gpio_request {
+	__le16 type;
+	__le16 gpio;
+	__le32 value;
+};
+
+struct virtio_gpio_response {
+	__u8 status;
+	__u8 value;
+};
+
+struct virtio_gpio_response_get_names {
+	__u8 status;
+	__u8 value[];
+};
+
+#endif /* _LINUX_VIRTIO_GPIO_H */
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 6da2f80a85e8..50d352f5e86f 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -58,6 +58,7 @@
 #define VIRTIO_ID_SCMI			32 /* virtio SCMI */
 #define VIRTIO_ID_I2C_ADAPTER		34 /* virtio i2c adapter */
 #define VIRTIO_ID_BT			40 /* virtio bluetooth */
+#define VIRTIO_ID_GPIO			41 /* virtio gpio */
 
 /*
  * Virtio Transitional IDs
diff --git a/include/uapi/linux/virtio_pcidev.h b/include/uapi/linux/virtio_pcidev.h
index 89daa88bcfef..668b07ce515b 100644
--- a/include/uapi/linux/virtio_pcidev.h
+++ b/include/uapi/linux/virtio_pcidev.h
@@ -9,13 +9,14 @@
 
 /**
  * enum virtio_pcidev_ops - virtual PCI device operations
+ * @VIRTIO_PCIDEV_OP_RESERVED: reserved to catch errors
  * @VIRTIO_PCIDEV_OP_CFG_READ: read config space, size is 1, 2, 4 or 8;
  *	the @data field should be filled in by the device (in little endian).
  * @VIRTIO_PCIDEV_OP_CFG_WRITE: write config space, size is 1, 2, 4 or 8;
  *	the @data field contains the data to write (in little endian).
- * @VIRTIO_PCIDEV_OP_BAR_READ: read BAR mem/pio, size can be variable;
+ * @VIRTIO_PCIDEV_OP_MMIO_READ: read BAR mem/pio, size can be variable;
  *	the @data field should be filled in by the device (in little endian).
- * @VIRTIO_PCIDEV_OP_BAR_WRITE: write BAR mem/pio, size can be variable;
+ * @VIRTIO_PCIDEV_OP_MMIO_WRITE: write BAR mem/pio, size can be variable;
  *	the @data field contains the data to write (in little endian).
  * @VIRTIO_PCIDEV_OP_MMIO_MEMSET: memset MMIO, size is variable but
  *	the @data field only has one byte (unlike @VIRTIO_PCIDEV_OP_MMIO_WRITE)
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index a47a731e4527..7cc2a0f3f2f5 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -276,7 +276,17 @@ enum hl_device_status {
 	HL_DEVICE_STATUS_OPERATIONAL,
 	HL_DEVICE_STATUS_IN_RESET,
 	HL_DEVICE_STATUS_MALFUNCTION,
-	HL_DEVICE_STATUS_NEEDS_RESET
+	HL_DEVICE_STATUS_NEEDS_RESET,
+	HL_DEVICE_STATUS_IN_DEVICE_CREATION,
+	HL_DEVICE_STATUS_LAST = HL_DEVICE_STATUS_IN_DEVICE_CREATION
+};
+
+enum hl_server_type {
+	HL_SERVER_TYPE_UNKNOWN = 0,
+	HL_SERVER_GAUDI_HLS1 = 1,
+	HL_SERVER_GAUDI_HLS1H = 2,
+	HL_SERVER_GAUDI_TYPE1 = 3,
+	HL_SERVER_GAUDI_TYPE2 = 4
 };
 
 /* Opcode for management ioctl
@@ -337,17 +347,49 @@ enum hl_device_status {
 #define HL_INFO_VERSION_MAX_LEN	128
 #define HL_INFO_CARD_NAME_MAX_LEN	16
 
+/**
+ * struct hl_info_hw_ip_info - hardware information on various IPs in the ASIC
+ * @sram_base_address: The first SRAM physical base address that is free to be
+ *                     used by the user.
+ * @dram_base_address: The first DRAM virtual or physical base address that is
+ *                     free to be used by the user.
+ * @dram_size: The DRAM size that is available to the user.
+ * @sram_size: The SRAM size that is available to the user.
+ * @num_of_events: The number of events that can be received from the f/w. This
+ *                 is needed so the user can what is the size of the h/w events
+ *                 array he needs to pass to the kernel when he wants to fetch
+ *                 the event counters.
+ * @device_id: PCI device ID of the ASIC.
+ * @module_id: Module ID of the ASIC for mezzanine cards in servers
+ *             (From OCP spec).
+ * @first_available_interrupt_id: The first available interrupt ID for the user
+ *                                to be used when it works with user interrupts.
+ * @server_type: Server type that the Gaudi ASIC is currently installed in.
+ *               The value is according to enum hl_server_type
+ * @cpld_version: CPLD version on the board.
+ * @psoc_pci_pll_nr: PCI PLL NR value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_nf: PCI PLL NF value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_od: PCI PLL OD value. Needed by the profiler in some ASICs.
+ * @psoc_pci_pll_div_factor: PCI PLL DIV factor value. Needed by the profiler
+ *                           in some ASICs.
+ * @tpc_enabled_mask: Bit-mask that represents which TPCs are enabled. Relevant
+ *                    for Goya/Gaudi only.
+ * @dram_enabled: Whether the DRAM is enabled.
+ * @cpucp_version: The CPUCP f/w version.
+ * @card_name: The card name as passed by the f/w.
+ * @dram_page_size: The DRAM physical page size.
+ */
 struct hl_info_hw_ip_info {
 	__u64 sram_base_address;
 	__u64 dram_base_address;
 	__u64 dram_size;
 	__u32 sram_size;
 	__u32 num_of_events;
-	__u32 device_id; /* PCI Device ID */
-	__u32 module_id; /* For mezzanine cards in servers (From OCP spec.) */
+	__u32 device_id;
+	__u32 module_id;
 	__u32 reserved;
 	__u16 first_available_interrupt_id;
-	__u16 reserved2;
+	__u16 server_type;
 	__u32 cpld_version;
 	__u32 psoc_pci_pll_nr;
 	__u32 psoc_pci_pll_nf;
@@ -358,7 +400,7 @@ struct hl_info_hw_ip_info {
 	__u8 pad[2];
 	__u8 cpucp_version[HL_INFO_VERSION_MAX_LEN];
 	__u8 card_name[HL_INFO_CARD_NAME_MAX_LEN];
-	__u64 reserved3;
+	__u64 reserved2;
 	__u64 dram_page_size;
 };
 
@@ -628,12 +670,21 @@ struct hl_cs_chunk {
 		__u64 cb_handle;
 
 		/* Relevant only when HL_CS_FLAGS_WAIT or
-		 * HL_CS_FLAGS_COLLECTIVE_WAIT is set.
+		 * HL_CS_FLAGS_COLLECTIVE_WAIT is set
 		 * This holds address of array of u64 values that contain
-		 * signal CS sequence numbers. The wait described by this job
-		 * will listen on all those signals (wait event per signal)
+		 * signal CS sequence numbers. The wait described by
+		 * this job will listen on all those signals
+		 * (wait event per signal)
 		 */
 		__u64 signal_seq_arr;
+
+		/*
+		 * Relevant only when HL_CS_FLAGS_WAIT or
+		 * HL_CS_FLAGS_COLLECTIVE_WAIT is set
+		 * along with HL_CS_FLAGS_ENCAP_SIGNALS.
+		 * This is the CS sequence which has the encapsulated signals.
+		 */
+		__u64 encaps_signal_seq;
 	};
 
 	/* Index of queue to put the CB on */
@@ -651,6 +702,17 @@ struct hl_cs_chunk {
 		 * Number of entries in signal_seq_arr
 		 */
 		__u32 num_signal_seq_arr;
+
+		/* Relevant only when HL_CS_FLAGS_WAIT or
+		 * HL_CS_FLAGS_COLLECTIVE_WAIT is set along
+		 * with HL_CS_FLAGS_ENCAP_SIGNALS
+		 * This set the signals range that the user want to wait for
+		 * out of the whole reserved signals range.
+		 * e.g if the signals range is 20, and user don't want
+		 * to wait for signal 8, so he set this offset to 7, then
+		 * he call the API again with 9 and so on till 20.
+		 */
+		__u32 encaps_signal_offset;
 	};
 
 	/* HL_CS_CHUNK_FLAGS_* */
@@ -678,6 +740,28 @@ struct hl_cs_chunk {
 #define HL_CS_FLAGS_CUSTOM_TIMEOUT		0x200
 #define HL_CS_FLAGS_SKIP_RESET_ON_TIMEOUT	0x400
 
+/*
+ * The encapsulated signals CS is merged into the existing CS ioctls.
+ * In order to use this feature need to follow the below procedure:
+ * 1. Reserve signals, set the CS type to HL_CS_FLAGS_RESERVE_SIGNALS_ONLY
+ *    the output of this API will be the SOB offset from CFG_BASE.
+ *    this address will be used to patch CB cmds to do the signaling for this
+ *    SOB by incrementing it's value.
+ *    for reverting the reservation use HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY
+ *    CS type, note that this might fail if out-of-sync happened to the SOB
+ *    value, in case other signaling request to the same SOB occurred between
+ *    reserve-unreserve calls.
+ * 2. Use the staged CS to do the encapsulated signaling jobs.
+ *    use HL_CS_FLAGS_STAGED_SUBMISSION and HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
+ *    along with HL_CS_FLAGS_ENCAP_SIGNALS flag, and set encaps_signal_offset
+ *    field. This offset allows app to wait on part of the reserved signals.
+ * 3. Use WAIT/COLLECTIVE WAIT CS along with HL_CS_FLAGS_ENCAP_SIGNALS flag
+ *    to wait for the encapsulated signals.
+ */
+#define HL_CS_FLAGS_ENCAP_SIGNALS		0x800
+#define HL_CS_FLAGS_RESERVE_SIGNALS_ONLY	0x1000
+#define HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY	0x2000
+
 #define HL_CS_STATUS_SUCCESS		0
 
 #define HL_MAX_JOBS_PER_CS		512
@@ -690,10 +774,35 @@ struct hl_cs_in {
 	/* holds address of array of hl_cs_chunk for execution phase */
 	__u64 chunks_execute;
 
-	/* Sequence number of a staged submission CS
-	 * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set
-	 */
-	__u64 seq;
+	union {
+		/*
+		 * Sequence number of a staged submission CS
+		 * valid only if HL_CS_FLAGS_STAGED_SUBMISSION is set and
+		 * HL_CS_FLAGS_STAGED_SUBMISSION_FIRST is unset.
+		 */
+		__u64 seq;
+
+		/*
+		 * Encapsulated signals handle id
+		 * Valid for two flows:
+		 * 1. CS with encapsulated signals:
+		 *    when HL_CS_FLAGS_STAGED_SUBMISSION and
+		 *    HL_CS_FLAGS_STAGED_SUBMISSION_FIRST
+		 *    and HL_CS_FLAGS_ENCAP_SIGNALS are set.
+		 * 2. unreserve signals:
+		 *    valid when HL_CS_FLAGS_UNRESERVE_SIGNALS_ONLY is set.
+		 */
+		__u32 encaps_sig_handle_id;
+
+		/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
+		struct {
+			/* Encapsulated signals number */
+			__u32 encaps_signals_count;
+
+			/* Encapsulated signals queue index (stream) */
+			__u32 encaps_signals_q_idx;
+		};
+	};
 
 	/* Number of chunks in restore phase array. Maximum number is
 	 * HL_MAX_JOBS_PER_CS
@@ -718,14 +827,31 @@ struct hl_cs_in {
 };
 
 struct hl_cs_out {
+	union {
+		/*
+		 * seq holds the sequence number of the CS to pass to wait
+		 * ioctl. All values are valid except for 0 and ULLONG_MAX
+		 */
+		__u64 seq;
+
+		/* Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set */
+		struct {
+			/* This is the resereved signal handle id */
+			__u32 handle_id;
+
+			/* This is the signals count */
+			__u32 count;
+		};
+	};
+
+	/* HL_CS_STATUS */
+	__u32 status;
+
 	/*
-	 * seq holds the sequence number of the CS to pass to wait ioctl. All
-	 * values are valid except for 0 and ULLONG_MAX
+	 * SOB base address offset
+	 * Valid only when HL_CS_FLAGS_RESERVE_SIGNALS_ONLY is set
 	 */
-	__u64 seq;
-	/* HL_CS_STATUS_* */
-	__u32 status;
-	__u32 pad;
+	__u32 sob_base_addr_offset;
 };
 
 union hl_cs_args {
@@ -735,11 +861,18 @@ union hl_cs_args {
 
 #define HL_WAIT_CS_FLAGS_INTERRUPT	0x2
 #define HL_WAIT_CS_FLAGS_INTERRUPT_MASK 0xFFF00000
+#define HL_WAIT_CS_FLAGS_MULTI_CS	0x4
+
+#define HL_WAIT_MULTI_CS_LIST_MAX_LEN	32
 
 struct hl_wait_cs_in {
 	union {
 		struct {
-			/* Command submission sequence number */
+			/*
+			 * In case of wait_cs holds the CS sequence number.
+			 * In case of wait for multi CS hold a user pointer to
+			 * an array of CS sequence numbers
+			 */
 			__u64 seq;
 			/* Absolute timeout to wait for command submission
 			 * in microseconds
@@ -767,12 +900,17 @@ struct hl_wait_cs_in {
 
 	/* Context ID - Currently not in use */
 	__u32 ctx_id;
+
 	/* HL_WAIT_CS_FLAGS_*
 	 * If HL_WAIT_CS_FLAGS_INTERRUPT is set, this field should include
 	 * interrupt id according to HL_WAIT_CS_FLAGS_INTERRUPT_MASK, in order
 	 * not to specify an interrupt id ,set mask to all 1s.
 	 */
 	__u32 flags;
+
+	/* Multi CS API info- valid entries in multi-CS array */
+	__u8 seq_arr_len;
+	__u8 pad[7];
 };
 
 #define HL_WAIT_CS_STATUS_COMPLETED	0
@@ -789,8 +927,15 @@ struct hl_wait_cs_out {
 	__u32 status;
 	/* HL_WAIT_CS_STATUS_FLAG* */
 	__u32 flags;
-	/* valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set */
+	/*
+	 * valid only if HL_WAIT_CS_STATUS_FLAG_TIMESTAMP_VLD is set
+	 * for wait_cs: timestamp of CS completion
+	 * for wait_multi_cs: timestamp of FIRST CS completion
+	 */
 	__s64 timestamp_nsec;
+	/* multi CS completion bitmap */
+	__u32 cs_completion_map;
+	__u32 pad;
 };
 
 union hl_wait_cs_args {
@@ -813,6 +958,7 @@ union hl_wait_cs_args {
 #define HL_MEM_CONTIGUOUS	0x1
 #define HL_MEM_SHARED		0x2
 #define HL_MEM_USERPTR		0x4
+#define HL_MEM_FORCE_HINT	0x8
 
 struct hl_mem_in {
 	union {
diff --git a/init/Kconfig b/init/Kconfig
index 8cb97f141b70..11f8a845f259 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -139,7 +139,7 @@ config COMPILE_TEST
 
 config WERROR
 	bool "Compile the kernel with warnings as errors"
-	default y
+	default COMPILE_TEST
 	help
 	  A kernel build should not cause any compiler warnings, and this
 	  enables the '-Werror' flag to enforce that rule by default.
diff --git a/init/do_mounts.c b/init/do_mounts.c
index b691d6891e51..2ed30ff6c906 100644
--- a/init/do_mounts.c
+++ b/init/do_mounts.c
@@ -338,31 +338,22 @@ __setup("rootflags=", root_data_setup);
 __setup("rootfstype=", fs_names_setup);
 __setup("rootdelay=", root_delay_setup);
 
-static void __init get_fs_names(char *page)
+static int __init split_fs_names(char *page, char *names)
 {
-	char *s = page;
+	int count = 0;
+	char *p = page;
 
-	if (root_fs_names) {
-		strcpy(page, root_fs_names);
-		while (*s++) {
-			if (s[-1] == ',')
-				s[-1] = '\0';
-		}
-	} else {
-		int len = get_filesystem_list(page);
-		char *p, *next;
-
-		page[len] = '\0';
-		for (p = page-1; p; p = next) {
-			next = strchr(++p, '\n');
-			if (*p++ != '\t')
-				continue;
-			while ((*s++ = *p++) != '\n')
-				;
-			s[-1] = '\0';
-		}
+	strcpy(p, root_fs_names);
+	while (*p++) {
+		if (p[-1] == ',')
+			p[-1] = '\0';
 	}
-	*s = '\0';
+	*p = '\0';
+
+	for (p = page; *p; p += strlen(p)+1)
+		count++;
+
+	return count;
 }
 
 static int __init do_mount_root(const char *name, const char *fs,
@@ -408,12 +399,16 @@ void __init mount_block_root(char *name, int flags)
 	char *fs_names = page_address(page);
 	char *p;
 	char b[BDEVNAME_SIZE];
+	int num_fs, i;
 
 	scnprintf(b, BDEVNAME_SIZE, "unknown-block(%u,%u)",
 		  MAJOR(ROOT_DEV), MINOR(ROOT_DEV));
-	get_fs_names(fs_names);
+	if (root_fs_names)
+		num_fs = split_fs_names(fs_names, root_fs_names);
+	else
+		num_fs = list_bdev_fs_names(fs_names, PAGE_SIZE);
 retry:
-	for (p = fs_names; *p; p += strlen(p)+1) {
+	for (i = 0, p = fs_names; i < num_fs; i++, p += strlen(p)+1) {
 		int err = do_mount_root(name, p, flags, root_mount_data);
 		switch (err) {
 			case 0:
@@ -442,7 +437,7 @@ retry:
 	printk("List of all partitions:\n");
 	printk_all_partitions();
 	printk("No filesystem could mount root, tried: ");
-	for (p = fs_names; *p; p += strlen(p)+1)
+	for (i = 0, p = fs_names; i < num_fs; i++, p += strlen(p)+1)
 		printk(" %s", p);
 	printk("\n");
 	panic("VFS: Unable to mount root fs on %s", b);
@@ -526,6 +521,47 @@ static int __init mount_cifs_root(void)
 }
 #endif
 
+static bool __init fs_is_nodev(char *fstype)
+{
+	struct file_system_type *fs = get_fs_type(fstype);
+	bool ret = false;
+
+	if (fs) {
+		ret = !(fs->fs_flags & FS_REQUIRES_DEV);
+		put_filesystem(fs);
+	}
+
+	return ret;
+}
+
+static int __init mount_nodev_root(void)
+{
+	char *fs_names, *fstype;
+	int err = -EINVAL;
+	int num_fs, i;
+
+	fs_names = (void *)__get_free_page(GFP_KERNEL);
+	if (!fs_names)
+		return -EINVAL;
+	num_fs = split_fs_names(fs_names, root_fs_names);
+
+	for (i = 0, fstype = fs_names; i < num_fs;
+	     i++, fstype += strlen(fstype) + 1) {
+		if (!fs_is_nodev(fstype))
+			continue;
+		err = do_mount_root(root_device_name, fstype, root_mountflags,
+				    root_mount_data);
+		if (!err)
+			break;
+		if (err != -EACCES && err != -EINVAL)
+			panic("VFS: Unable to mount root \"%s\" (%s), err=%d\n",
+			      root_device_name, fstype, err);
+	}
+
+	free_page((unsigned long)fs_names);
+	return err;
+}
+
 void __init mount_root(void)
 {
 #ifdef CONFIG_ROOT_NFS
@@ -542,6 +578,10 @@ void __init mount_root(void)
 		return;
 	}
 #endif
+	if (ROOT_DEV == 0 && root_device_name && root_fs_names) {
+		if (mount_nodev_root() == 0)
+			return;
+	}
 #ifdef CONFIG_BLOCK
 	{
 		int err = create_dev("/dev/root", ROOT_DEV);
diff --git a/init/initramfs.c b/init/initramfs.c
index af27abc59643..a842c0544745 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -15,6 +15,7 @@
 #include <linux/mm.h>
 #include <linux/namei.h>
 #include <linux/init_syscalls.h>
+#include <linux/umh.h>
 
 static ssize_t __init xwrite(struct file *file, const char *p, size_t count,
 		loff_t *pos)
@@ -727,6 +728,7 @@ static int __init populate_rootfs(void)
 {
 	initramfs_cookie = async_schedule_domain(do_populate_rootfs, NULL,
 						 &initramfs_domain);
+	usermodehelper_enable();
 	if (!initramfs_async)
 		wait_for_initramfs();
 	return 0;
diff --git a/init/main.c b/init/main.c
index daad6979f782..5c9a48df90e1 100644
--- a/init/main.c
+++ b/init/main.c
@@ -153,10 +153,10 @@ static char *extra_init_args;
 #ifdef CONFIG_BOOT_CONFIG
 /* Is bootconfig on command line? */
 static bool bootconfig_found;
-static bool initargs_found;
+static size_t initargs_offs;
 #else
 # define bootconfig_found false
-# define initargs_found false
+# define initargs_offs 0
 #endif
 
 static char *execute_command;
@@ -422,9 +422,9 @@ static void __init setup_boot_config(void)
 	if (IS_ERR(err) || !bootconfig_found)
 		return;
 
-	/* parse_args() stops at '--' and returns an address */
+	/* parse_args() stops at the next param of '--' and returns an address */
 	if (err)
-		initargs_found = true;
+		initargs_offs = err - tmp_cmdline;
 
 	if (!data) {
 		pr_err("'bootconfig' found on command line, but no bootconfig found\n");
@@ -468,7 +468,12 @@ static void __init setup_boot_config(void)
 	return;
 }
 
-#else
+static void __init exit_boot_config(void)
+{
+	xbc_destroy_all();
+}
+
+#else	/* !CONFIG_BOOT_CONFIG */
 
 static void __init setup_boot_config(void)
 {
@@ -481,7 +486,11 @@ static int __init warn_bootconfig(char *str)
 	pr_warn("WARNING: 'bootconfig' found on the kernel command line but CONFIG_BOOT_CONFIG is not set.\n");
 	return 0;
 }
-#endif
+
+#define exit_boot_config()	do {} while (0)
+
+#endif	/* CONFIG_BOOT_CONFIG */
+
 early_param("bootconfig", warn_bootconfig);
 
 /* Change NUL term back to "=", to make "param" the whole string. */
@@ -646,16 +655,21 @@ static void __init setup_command_line(char *command_line)
 		 * Append supplemental init boot args to saved_command_line
 		 * so that user can check what command line options passed
 		 * to init.
+		 * The order should always be
+		 * " -- "[bootconfig init-param][cmdline init-param]
 		 */
-		len = strlen(saved_command_line);
-		if (initargs_found) {
-			saved_command_line[len++] = ' ';
+		if (initargs_offs) {
+			len = xlen + initargs_offs;
+			strcpy(saved_command_line + len, extra_init_args);
+			len += ilen - 4;	/* strlen(extra_init_args) */
+			strcpy(saved_command_line + len,
+				boot_command_line + initargs_offs - 1);
 		} else {
+			len = strlen(saved_command_line);
 			strcpy(saved_command_line + len, " -- ");
 			len += 4;
+			strcpy(saved_command_line + len, extra_init_args);
 		}
-
-		strcpy(saved_command_line + len, extra_init_args);
 	}
 }
 
@@ -777,6 +791,8 @@ void __init __weak poking_init(void) { }
 
 void __init __weak pgtable_cache_init(void) { }
 
+void __init __weak trap_init(void) { }
+
 bool initcall_debug;
 core_param(initcall_debug, initcall_debug, bool, 0644);
 
@@ -1392,7 +1408,6 @@ static void __init do_basic_setup(void)
 	driver_init();
 	init_irq_proc();
 	do_ctors();
-	usermodehelper_enable();
 	do_initcalls();
 }
 
@@ -1493,6 +1508,7 @@ static int __ref kernel_init(void *unused)
 	kprobe_free_init_mem();
 	ftrace_free_init_mem();
 	kgdb_free_init_mem();
+	exit_boot_config();
 	free_initmem();
 	mark_readonly();
 
diff --git a/init/noinitramfs.c b/init/noinitramfs.c
index 3d62b07f3bb9..d1d26b93d25c 100644
--- a/init/noinitramfs.c
+++ b/init/noinitramfs.c
@@ -10,6 +10,7 @@
 #include <linux/kdev_t.h>
 #include <linux/syscalls.h>
 #include <linux/init_syscalls.h>
+#include <linux/umh.h>
 
 /*
  * Create a simple rootfs that is similar to the default initramfs
@@ -18,6 +19,7 @@ static int __init default_rootfs(void)
 {
 	int err;
 
+	usermodehelper_enable();
 	err = init_mkdir("/dev", 0755);
 	if (err < 0)
 		goto out;
diff --git a/ipc/sem.c b/ipc/sem.c
index 1a8b9f0ac047..f833238df1ce 100644
--- a/ipc/sem.c
+++ b/ipc/sem.c
@@ -1984,47 +1984,34 @@ out:
 	return un;
 }
 
-static long do_semtimedop(int semid, struct sembuf __user *tsops,
-		unsigned nsops, const struct timespec64 *timeout)
+long __do_semtimedop(int semid, struct sembuf *sops,
+		unsigned nsops, const struct timespec64 *timeout,
+		struct ipc_namespace *ns)
 {
 	int error = -EINVAL;
 	struct sem_array *sma;
-	struct sembuf fast_sops[SEMOPM_FAST];
-	struct sembuf *sops = fast_sops, *sop;
+	struct sembuf *sop;
 	struct sem_undo *un;
 	int max, locknum;
 	bool undos = false, alter = false, dupsop = false;
 	struct sem_queue queue;
 	unsigned long dup = 0, jiffies_left = 0;
-	struct ipc_namespace *ns;
-
-	ns = current->nsproxy->ipc_ns;
 
 	if (nsops < 1 || semid < 0)
 		return -EINVAL;
 	if (nsops > ns->sc_semopm)
 		return -E2BIG;
-	if (nsops > SEMOPM_FAST) {
-		sops = kvmalloc_array(nsops, sizeof(*sops),
-				      GFP_KERNEL_ACCOUNT);
-		if (sops == NULL)
-			return -ENOMEM;
-	}
-
-	if (copy_from_user(sops, tsops, nsops * sizeof(*tsops))) {
-		error =  -EFAULT;
-		goto out_free;
-	}
 
 	if (timeout) {
 		if (timeout->tv_sec < 0 || timeout->tv_nsec < 0 ||
 			timeout->tv_nsec >= 1000000000L) {
 			error = -EINVAL;
-			goto out_free;
+			goto out;
 		}
 		jiffies_left = timespec64_to_jiffies(timeout);
 	}
 
+
 	max = 0;
 	for (sop = sops; sop < sops + nsops; sop++) {
 		unsigned long mask = 1ULL << ((sop->sem_num) % BITS_PER_LONG);
@@ -2053,7 +2040,7 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 		un = find_alloc_undo(ns, semid);
 		if (IS_ERR(un)) {
 			error = PTR_ERR(un);
-			goto out_free;
+			goto out;
 		}
 	} else {
 		un = NULL;
@@ -2064,25 +2051,25 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 	if (IS_ERR(sma)) {
 		rcu_read_unlock();
 		error = PTR_ERR(sma);
-		goto out_free;
+		goto out;
 	}
 
 	error = -EFBIG;
 	if (max >= sma->sem_nsems) {
 		rcu_read_unlock();
-		goto out_free;
+		goto out;
 	}
 
 	error = -EACCES;
 	if (ipcperms(ns, &sma->sem_perm, alter ? S_IWUGO : S_IRUGO)) {
 		rcu_read_unlock();
-		goto out_free;
+		goto out;
 	}
 
 	error = security_sem_semop(&sma->sem_perm, sops, nsops, alter);
 	if (error) {
 		rcu_read_unlock();
-		goto out_free;
+		goto out;
 	}
 
 	error = -EIDRM;
@@ -2096,7 +2083,7 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 	 * entangled here and why it's RMID race safe on comments at sem_lock()
 	 */
 	if (!ipc_valid_object(&sma->sem_perm))
-		goto out_unlock_free;
+		goto out_unlock;
 	/*
 	 * semid identifiers are not unique - find_alloc_undo may have
 	 * allocated an undo structure, it was invalidated by an RMID
@@ -2105,7 +2092,7 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 	 * "un" itself is guaranteed by rcu.
 	 */
 	if (un && un->semid == -1)
-		goto out_unlock_free;
+		goto out_unlock;
 
 	queue.sops = sops;
 	queue.nsops = nsops;
@@ -2131,10 +2118,10 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 		rcu_read_unlock();
 		wake_up_q(&wake_q);
 
-		goto out_free;
+		goto out;
 	}
 	if (error < 0) /* non-blocking error path */
-		goto out_unlock_free;
+		goto out_unlock;
 
 	/*
 	 * We need to sleep on this operation, so we put the current
@@ -2199,14 +2186,14 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 		if (error != -EINTR) {
 			/* see SEM_BARRIER_2 for purpose/pairing */
 			smp_acquire__after_ctrl_dep();
-			goto out_free;
+			goto out;
 		}
 
 		rcu_read_lock();
 		locknum = sem_lock(sma, sops, nsops);
 
 		if (!ipc_valid_object(&sma->sem_perm))
-			goto out_unlock_free;
+			goto out_unlock;
 
 		/*
 		 * No necessity for any barrier: We are protect by sem_lock()
@@ -2218,7 +2205,7 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 		 * Leave without unlink_queue(), but with sem_unlock().
 		 */
 		if (error != -EINTR)
-			goto out_unlock_free;
+			goto out_unlock;
 
 		/*
 		 * If an interrupt occurred we have to clean up the queue.
@@ -2229,13 +2216,45 @@ static long do_semtimedop(int semid, struct sembuf __user *tsops,
 
 	unlink_queue(sma, &queue);
 
-out_unlock_free:
+out_unlock:
 	sem_unlock(sma, locknum);
 	rcu_read_unlock();
+out:
+	return error;
+}
+
+static long do_semtimedop(int semid, struct sembuf __user *tsops,
+		unsigned nsops, const struct timespec64 *timeout)
+{
+	struct sembuf fast_sops[SEMOPM_FAST];
+	struct sembuf *sops = fast_sops;
+	struct ipc_namespace *ns;
+	int ret;
+
+	ns = current->nsproxy->ipc_ns;
+	if (nsops > ns->sc_semopm)
+		return -E2BIG;
+	if (nsops < 1)
+		return -EINVAL;
+
+	if (nsops > SEMOPM_FAST) {
+		sops = kvmalloc_array(nsops, sizeof(*sops), GFP_KERNEL_ACCOUNT);
+		if (sops == NULL)
+			return -ENOMEM;
+	}
+
+	if (copy_from_user(sops, tsops, nsops * sizeof(*tsops))) {
+		ret =  -EFAULT;
+		goto out_free;
+	}
+
+	ret = __do_semtimedop(semid, sops, nsops, timeout, ns);
+
 out_free:
 	if (sops != fast_sops)
 		kvfree(sops);
-	return error;
+
+	return ret;
 }
 
 long ksys_semtimedop(int semid, struct sembuf __user *tsops,
diff --git a/ipc/util.c b/ipc/util.c
index 0027e47626b7..d48d8cfa1f3f 100644
--- a/ipc/util.c
+++ b/ipc/util.c
@@ -788,21 +788,13 @@ struct pid_namespace *ipc_seq_pid_ns(struct seq_file *s)
 static struct kern_ipc_perm *sysvipc_find_ipc(struct ipc_ids *ids, loff_t pos,
 					      loff_t *new_pos)
 {
-	struct kern_ipc_perm *ipc;
-	int total, id;
-
-	total = 0;
-	for (id = 0; id < pos && total < ids->in_use; id++) {
-		ipc = idr_find(&ids->ipcs_idr, id);
-		if (ipc != NULL)
-			total++;
-	}
+	struct kern_ipc_perm *ipc = NULL;
+	int max_idx = ipc_get_maxidx(ids);
 
-	ipc = NULL;
-	if (total >= ids->in_use)
+	if (max_idx == -1 || pos > max_idx)
 		goto out;
 
-	for (; pos < ipc_mni; pos++) {
+	for (; pos <= max_idx; pos++) {
 		ipc = idr_find(&ids->ipcs_idr, pos);
 		if (ipc != NULL) {
 			rcu_read_lock();
diff --git a/kernel/acct.c b/kernel/acct.c
index a64102be2bb0..23a7ab8e6cbc 100644
--- a/kernel/acct.c
+++ b/kernel/acct.c
@@ -478,7 +478,7 @@ static void do_acct_process(struct bsd_acct_struct *acct)
 	/*
 	 * Accounting records are not subject to resource limits.
 	 */
-	flim = current->signal->rlim[RLIMIT_FSIZE].rlim_cur;
+	flim = rlimit(RLIMIT_FSIZE);
 	current->signal->rlim[RLIMIT_FSIZE].rlim_cur = RLIM_INFINITY;
 	/* Perform file operations on behalf of whoever enabled accounting */
 	orig_cred = override_creds(file->f_cred);
diff --git a/kernel/compat.c b/kernel/compat.c
index 05adfd6fa8bf..55551989d9da 100644
--- a/kernel/compat.c
+++ b/kernel/compat.c
@@ -269,24 +269,3 @@ get_compat_sigset(sigset_t *set, const compat_sigset_t __user *compat)
 	return 0;
 }
 EXPORT_SYMBOL_GPL(get_compat_sigset);
-
-/*
- * Allocate user-space memory for the duration of a single system call,
- * in order to marshall parameters inside a compat thunk.
- */
-void __user *compat_alloc_user_space(unsigned long len)
-{
-	void __user *ptr;
-
-	/* If len would occupy more than half of the entire compat space... */
-	if (unlikely(len > (((compat_uptr_t)~0) >> 1)))
-		return NULL;
-
-	ptr = arch_compat_alloc_user_space(len);
-
-	if (unlikely(!access_ok(ptr, len)))
-		return NULL;
-
-	return ptr;
-}
-EXPORT_SYMBOL_GPL(compat_alloc_user_space);
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index b4aa6bb6b2bd..da06a5553835 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Kernel Debug Core
  *
@@ -22,10 +23,6 @@
  *
  * Original KGDB stub: David Grothe <dave@gcom.com>,
  * Tigran Aivazian <tigran@sco.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #define pr_fmt(fmt) "KGDB: " fmt
diff --git a/kernel/debug/gdbstub.c b/kernel/debug/gdbstub.c
index b6f28fad4307..9d34d2364b5a 100644
--- a/kernel/debug/gdbstub.c
+++ b/kernel/debug/gdbstub.c
@@ -1,3 +1,4 @@
+// SPDX-License-Identifier: GPL-2.0-only
 /*
  * Kernel Debug Core
  *
@@ -22,10 +23,6 @@
  *
  * Original KGDB stub: David Grothe <dave@gcom.com>,
  * Tigran Aivazian <tigran@sco.com>
- *
- * This file is licensed under the terms of the GNU General Public License
- * version 2. This program is licensed "as is" without any warranty of any
- * kind, whether express or implied.
  */
 
 #include <linux/kernel.h>
diff --git a/kernel/debug/kdb/kdb_bp.c b/kernel/debug/kdb/kdb_bp.c
index 2168f8dacb99..372025cf1ca3 100644
--- a/kernel/debug/kdb/kdb_bp.c
+++ b/kernel/debug/kdb/kdb_bp.c
@@ -523,51 +523,51 @@ static int kdb_ss(int argc, const char **argv)
 }
 
 static kdbtab_t bptab[] = {
-	{	.cmd_name = "bp",
-		.cmd_func = kdb_bp,
-		.cmd_usage = "[<vaddr>]",
-		.cmd_help = "Set/Display breakpoints",
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
+	{	.name = "bp",
+		.func = kdb_bp,
+		.usage = "[<vaddr>]",
+		.help = "Set/Display breakpoints",
+		.flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "bl",
-		.cmd_func = kdb_bp,
-		.cmd_usage = "[<vaddr>]",
-		.cmd_help = "Display breakpoints",
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
+	{	.name = "bl",
+		.func = kdb_bp,
+		.usage = "[<vaddr>]",
+		.help = "Display breakpoints",
+		.flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "bc",
-		.cmd_func = kdb_bc,
-		.cmd_usage = "<bpnum>",
-		.cmd_help = "Clear Breakpoint",
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL,
+	{	.name = "bc",
+		.func = kdb_bc,
+		.usage = "<bpnum>",
+		.help = "Clear Breakpoint",
+		.flags = KDB_ENABLE_FLOW_CTRL,
 	},
-	{	.cmd_name = "be",
-		.cmd_func = kdb_bc,
-		.cmd_usage = "<bpnum>",
-		.cmd_help = "Enable Breakpoint",
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL,
+	{	.name = "be",
+		.func = kdb_bc,
+		.usage = "<bpnum>",
+		.help = "Enable Breakpoint",
+		.flags = KDB_ENABLE_FLOW_CTRL,
 	},
-	{	.cmd_name = "bd",
-		.cmd_func = kdb_bc,
-		.cmd_usage = "<bpnum>",
-		.cmd_help = "Disable Breakpoint",
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL,
+	{	.name = "bd",
+		.func = kdb_bc,
+		.usage = "<bpnum>",
+		.help = "Disable Breakpoint",
+		.flags = KDB_ENABLE_FLOW_CTRL,
 	},
-	{	.cmd_name = "ss",
-		.cmd_func = kdb_ss,
-		.cmd_usage = "",
-		.cmd_help = "Single Step",
-		.cmd_minlen = 1,
-		.cmd_flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
+	{	.name = "ss",
+		.func = kdb_ss,
+		.usage = "",
+		.help = "Single Step",
+		.minlen = 1,
+		.flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
 	},
 };
 
 static kdbtab_t bphcmd = {
-	.cmd_name = "bph",
-	.cmd_func = kdb_bp,
-	.cmd_usage = "[<vaddr>]",
-	.cmd_help = "[datar [length]|dataw [length]]   Set hw brk",
-	.cmd_flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
+	.name = "bph",
+	.func = kdb_bp,
+	.usage = "[<vaddr>]",
+	.help = "[datar [length]|dataw [length]]   Set hw brk",
+	.flags = KDB_ENABLE_FLOW_CTRL | KDB_REPEAT_NO_ARGS,
 };
 
 /* Initialize the breakpoint table and register	breakpoint commands. */
diff --git a/kernel/debug/kdb/kdb_debugger.c b/kernel/debug/kdb/kdb_debugger.c
index 0220afda3200..e91fc3e4edd5 100644
--- a/kernel/debug/kdb/kdb_debugger.c
+++ b/kernel/debug/kdb/kdb_debugger.c
@@ -140,7 +140,6 @@ int kdb_stub(struct kgdb_state *ks)
 	 */
 	kdb_common_deinit_state();
 	KDB_STATE_CLEAR(PAGER);
-	kdbnearsym_cleanup();
 	if (error == KDB_CMD_KGDB) {
 		if (KDB_STATE(DOING_KGDB))
 			KDB_STATE_CLEAR(DOING_KGDB);
diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c
index d8ee5647b732..fa6deda894a1 100644
--- a/kernel/debug/kdb/kdb_main.c
+++ b/kernel/debug/kdb/kdb_main.c
@@ -33,7 +33,6 @@
 #include <linux/kallsyms.h>
 #include <linux/kgdb.h>
 #include <linux/kdb.h>
-#include <linux/list.h>
 #include <linux/notifier.h>
 #include <linux/interrupt.h>
 #include <linux/delay.h>
@@ -654,16 +653,17 @@ static void kdb_cmderror(int diag)
  * Returns:
  *	zero for success, a kdb diagnostic if error
  */
-struct defcmd_set {
-	int count;
-	bool usable;
-	char *name;
-	char *usage;
-	char *help;
-	char **command;
+struct kdb_macro {
+	kdbtab_t cmd;			/* Macro command */
+	struct list_head statements;	/* Associated statement list */
 };
-static struct defcmd_set *defcmd_set;
-static int defcmd_set_count;
+
+struct kdb_macro_statement {
+	char *statement;		/* Statement text */
+	struct list_head list_node;	/* Statement list node */
+};
+
+static struct kdb_macro *kdb_macro;
 static bool defcmd_in_progress;
 
 /* Forward references */
@@ -671,53 +671,55 @@ static int kdb_exec_defcmd(int argc, const char **argv);
 
 static int kdb_defcmd2(const char *cmdstr, const char *argv0)
 {
-	struct defcmd_set *s = defcmd_set + defcmd_set_count - 1;
-	char **save_command = s->command;
+	struct kdb_macro_statement *kms;
+
+	if (!kdb_macro)
+		return KDB_NOTIMP;
+
 	if (strcmp(argv0, "endefcmd") == 0) {
 		defcmd_in_progress = false;
-		if (!s->count)
-			s->usable = false;
-		if (s->usable)
-			/* macros are always safe because when executed each
-			 * internal command re-enters kdb_parse() and is
-			 * safety checked individually.
-			 */
-			kdb_register_flags(s->name, kdb_exec_defcmd, s->usage,
-					   s->help, 0,
-					   KDB_ENABLE_ALWAYS_SAFE);
+		if (!list_empty(&kdb_macro->statements))
+			kdb_register(&kdb_macro->cmd);
 		return 0;
 	}
-	if (!s->usable)
-		return KDB_NOTIMP;
-	s->command = kcalloc(s->count + 1, sizeof(*(s->command)), GFP_KDB);
-	if (!s->command) {
-		kdb_printf("Could not allocate new kdb_defcmd table for %s\n",
+
+	kms = kmalloc(sizeof(*kms), GFP_KDB);
+	if (!kms) {
+		kdb_printf("Could not allocate new kdb macro command: %s\n",
 			   cmdstr);
-		s->usable = false;
 		return KDB_NOTIMP;
 	}
-	memcpy(s->command, save_command, s->count * sizeof(*(s->command)));
-	s->command[s->count++] = kdb_strdup(cmdstr, GFP_KDB);
-	kfree(save_command);
+
+	kms->statement = kdb_strdup(cmdstr, GFP_KDB);
+	list_add_tail(&kms->list_node, &kdb_macro->statements);
+
 	return 0;
 }
 
 static int kdb_defcmd(int argc, const char **argv)
 {
-	struct defcmd_set *save_defcmd_set = defcmd_set, *s;
+	kdbtab_t *mp;
+
 	if (defcmd_in_progress) {
 		kdb_printf("kdb: nested defcmd detected, assuming missing "
 			   "endefcmd\n");
 		kdb_defcmd2("endefcmd", "endefcmd");
 	}
 	if (argc == 0) {
-		int i;
-		for (s = defcmd_set; s < defcmd_set + defcmd_set_count; ++s) {
-			kdb_printf("defcmd %s \"%s\" \"%s\"\n", s->name,
-				   s->usage, s->help);
-			for (i = 0; i < s->count; ++i)
-				kdb_printf("%s", s->command[i]);
-			kdb_printf("endefcmd\n");
+		kdbtab_t *kp;
+		struct kdb_macro *kmp;
+		struct kdb_macro_statement *kms;
+
+		list_for_each_entry(kp, &kdb_cmds_head, list_node) {
+			if (kp->func == kdb_exec_defcmd) {
+				kdb_printf("defcmd %s \"%s\" \"%s\"\n",
+					   kp->name, kp->usage, kp->help);
+				kmp = container_of(kp, struct kdb_macro, cmd);
+				list_for_each_entry(kms, &kmp->statements,
+						    list_node)
+					kdb_printf("%s", kms->statement);
+				kdb_printf("endefcmd\n");
+			}
 		}
 		return 0;
 	}
@@ -727,45 +729,43 @@ static int kdb_defcmd(int argc, const char **argv)
 		kdb_printf("Command only available during kdb_init()\n");
 		return KDB_NOTIMP;
 	}
-	defcmd_set = kmalloc_array(defcmd_set_count + 1, sizeof(*defcmd_set),
-				   GFP_KDB);
-	if (!defcmd_set)
+	kdb_macro = kzalloc(sizeof(*kdb_macro), GFP_KDB);
+	if (!kdb_macro)
 		goto fail_defcmd;
-	memcpy(defcmd_set, save_defcmd_set,
-	       defcmd_set_count * sizeof(*defcmd_set));
-	s = defcmd_set + defcmd_set_count;
-	memset(s, 0, sizeof(*s));
-	s->usable = true;
-	s->name = kdb_strdup(argv[1], GFP_KDB);
-	if (!s->name)
+
+	mp = &kdb_macro->cmd;
+	mp->func = kdb_exec_defcmd;
+	mp->minlen = 0;
+	mp->flags = KDB_ENABLE_ALWAYS_SAFE;
+	mp->name = kdb_strdup(argv[1], GFP_KDB);
+	if (!mp->name)
 		goto fail_name;
-	s->usage = kdb_strdup(argv[2], GFP_KDB);
-	if (!s->usage)
+	mp->usage = kdb_strdup(argv[2], GFP_KDB);
+	if (!mp->usage)
 		goto fail_usage;
-	s->help = kdb_strdup(argv[3], GFP_KDB);
-	if (!s->help)
+	mp->help = kdb_strdup(argv[3], GFP_KDB);
+	if (!mp->help)
 		goto fail_help;
-	if (s->usage[0] == '"') {
-		strcpy(s->usage, argv[2]+1);
-		s->usage[strlen(s->usage)-1] = '\0';
+	if (mp->usage[0] == '"') {
+		strcpy(mp->usage, argv[2]+1);
+		mp->usage[strlen(mp->usage)-1] = '\0';
 	}
-	if (s->help[0] == '"') {
-		strcpy(s->help, argv[3]+1);
-		s->help[strlen(s->help)-1] = '\0';
+	if (mp->help[0] == '"') {
+		strcpy(mp->help, argv[3]+1);
+		mp->help[strlen(mp->help)-1] = '\0';
 	}
-	++defcmd_set_count;
+
+	INIT_LIST_HEAD(&kdb_macro->statements);
 	defcmd_in_progress = true;
-	kfree(save_defcmd_set);
 	return 0;
 fail_help:
-	kfree(s->usage);
+	kfree(mp->usage);
 fail_usage:
-	kfree(s->name);
+	kfree(mp->name);
 fail_name:
-	kfree(defcmd_set);
+	kfree(kdb_macro);
 fail_defcmd:
-	kdb_printf("Could not allocate new defcmd_set entry for %s\n", argv[1]);
-	defcmd_set = save_defcmd_set;
+	kdb_printf("Could not allocate new kdb_macro entry for %s\n", argv[1]);
 	return KDB_NOTIMP;
 }
 
@@ -780,25 +780,31 @@ fail_defcmd:
  */
 static int kdb_exec_defcmd(int argc, const char **argv)
 {
-	int i, ret;
-	struct defcmd_set *s;
+	int ret;
+	kdbtab_t *kp;
+	struct kdb_macro *kmp;
+	struct kdb_macro_statement *kms;
+
 	if (argc != 0)
 		return KDB_ARGCOUNT;
-	for (s = defcmd_set, i = 0; i < defcmd_set_count; ++i, ++s) {
-		if (strcmp(s->name, argv[0]) == 0)
+
+	list_for_each_entry(kp, &kdb_cmds_head, list_node) {
+		if (strcmp(kp->name, argv[0]) == 0)
 			break;
 	}
-	if (i == defcmd_set_count) {
+	if (list_entry_is_head(kp, &kdb_cmds_head, list_node)) {
 		kdb_printf("kdb_exec_defcmd: could not find commands for %s\n",
 			   argv[0]);
 		return KDB_NOTIMP;
 	}
-	for (i = 0; i < s->count; ++i) {
-		/* Recursive use of kdb_parse, do not use argv after
-		 * this point */
+	kmp = container_of(kp, struct kdb_macro, cmd);
+	list_for_each_entry(kms, &kmp->statements, list_node) {
+		/*
+		 * Recursive use of kdb_parse, do not use argv after this point.
+		 */
 		argv = NULL;
-		kdb_printf("[%s]kdb> %s\n", s->name, s->command[i]);
-		ret = kdb_parse(s->command[i]);
+		kdb_printf("[%s]kdb> %s\n", kmp->cmd.name, kms->statement);
+		ret = kdb_parse(kms->statement);
 		if (ret)
 			return ret;
 	}
@@ -1009,11 +1015,11 @@ int kdb_parse(const char *cmdstr)
 		 * If this command is allowed to be abbreviated,
 		 * check to see if this is it.
 		 */
-		if (tp->cmd_minlen && (strlen(argv[0]) <= tp->cmd_minlen) &&
-		    (strncmp(argv[0], tp->cmd_name, tp->cmd_minlen) == 0))
+		if (tp->minlen && (strlen(argv[0]) <= tp->minlen) &&
+		    (strncmp(argv[0], tp->name, tp->minlen) == 0))
 			break;
 
-		if (strcmp(argv[0], tp->cmd_name) == 0)
+		if (strcmp(argv[0], tp->name) == 0)
 			break;
 	}
 
@@ -1024,8 +1030,7 @@ int kdb_parse(const char *cmdstr)
 	 */
 	if (list_entry_is_head(tp, &kdb_cmds_head, list_node)) {
 		list_for_each_entry(tp, &kdb_cmds_head, list_node) {
-			if (strncmp(argv[0], tp->cmd_name,
-				    strlen(tp->cmd_name)) == 0)
+			if (strncmp(argv[0], tp->name, strlen(tp->name)) == 0)
 				break;
 		}
 	}
@@ -1033,19 +1038,19 @@ int kdb_parse(const char *cmdstr)
 	if (!list_entry_is_head(tp, &kdb_cmds_head, list_node)) {
 		int result;
 
-		if (!kdb_check_flags(tp->cmd_flags, kdb_cmd_enabled, argc <= 1))
+		if (!kdb_check_flags(tp->flags, kdb_cmd_enabled, argc <= 1))
 			return KDB_NOPERM;
 
 		KDB_STATE_SET(CMD);
-		result = (*tp->cmd_func)(argc-1, (const char **)argv);
+		result = (*tp->func)(argc-1, (const char **)argv);
 		if (result && ignore_errors && result > KDB_CMD_GO)
 			result = 0;
 		KDB_STATE_CLEAR(CMD);
 
-		if (tp->cmd_flags & KDB_REPEAT_WITH_ARGS)
+		if (tp->flags & KDB_REPEAT_WITH_ARGS)
 			return result;
 
-		argc = tp->cmd_flags & KDB_REPEAT_NO_ARGS ? 1 : 0;
+		argc = tp->flags & KDB_REPEAT_NO_ARGS ? 1 : 0;
 		if (argv[argc])
 			*(argv[argc]) = '\0';
 		return result;
@@ -2412,12 +2417,12 @@ static int kdb_help(int argc, const char **argv)
 		char *space = "";
 		if (KDB_FLAG(CMD_INTERRUPT))
 			return 0;
-		if (!kdb_check_flags(kt->cmd_flags, kdb_cmd_enabled, true))
+		if (!kdb_check_flags(kt->flags, kdb_cmd_enabled, true))
 			continue;
-		if (strlen(kt->cmd_usage) > 20)
+		if (strlen(kt->usage) > 20)
 			space = "\n                                    ";
-		kdb_printf("%-15.15s %-20s%s%s\n", kt->cmd_name,
-			   kt->cmd_usage, space, kt->cmd_help);
+		kdb_printf("%-15.15s %-20s%s%s\n", kt->name,
+			   kt->usage, space, kt->help);
 	}
 	return 0;
 }
@@ -2613,56 +2618,32 @@ static int kdb_grep_help(int argc, const char **argv)
 	return 0;
 }
 
-/*
- * kdb_register_flags - This function is used to register a kernel
- * 	debugger command.
- * Inputs:
- *	cmd	Command name
- *	func	Function to execute the command
- *	usage	A simple usage string showing arguments
- *	help	A simple help string describing command
- *	repeat	Does the command auto repeat on enter?
- * Returns:
- *	zero for success, one if a duplicate command.
+/**
+ * kdb_register() - This function is used to register a kernel debugger
+ *                  command.
+ * @cmd: pointer to kdb command
+ *
+ * Note that it's the job of the caller to keep the memory for the cmd
+ * allocated until unregister is called.
  */
-int kdb_register_flags(char *cmd,
-		       kdb_func_t func,
-		       char *usage,
-		       char *help,
-		       short minlen,
-		       kdb_cmdflags_t flags)
+int kdb_register(kdbtab_t *cmd)
 {
 	kdbtab_t *kp;
 
 	list_for_each_entry(kp, &kdb_cmds_head, list_node) {
-		if (strcmp(kp->cmd_name, cmd) == 0) {
-			kdb_printf("Duplicate kdb command registered: "
-				"%s, func %px help %s\n", cmd, func, help);
+		if (strcmp(kp->name, cmd->name) == 0) {
+			kdb_printf("Duplicate kdb cmd: %s, func %p help %s\n",
+				   cmd->name, cmd->func, cmd->help);
 			return 1;
 		}
 	}
 
-	kp = kmalloc(sizeof(*kp), GFP_KDB);
-	if (!kp) {
-		kdb_printf("Could not allocate new kdb_command table\n");
-		return 1;
-	}
-
-	kp->cmd_name   = cmd;
-	kp->cmd_func   = func;
-	kp->cmd_usage  = usage;
-	kp->cmd_help   = help;
-	kp->cmd_minlen = minlen;
-	kp->cmd_flags  = flags;
-	kp->is_dynamic = true;
-
-	list_add_tail(&kp->list_node, &kdb_cmds_head);
-
+	list_add_tail(&cmd->list_node, &kdb_cmds_head);
 	return 0;
 }
-EXPORT_SYMBOL_GPL(kdb_register_flags);
+EXPORT_SYMBOL_GPL(kdb_register);
 
-/*
+/**
  * kdb_register_table() - This function is used to register a kdb command
  *                        table.
  * @kp: pointer to kdb command table
@@ -2676,266 +2657,231 @@ void kdb_register_table(kdbtab_t *kp, size_t len)
 	}
 }
 
-/*
- * kdb_register - Compatibility register function for commands that do
- *	not need to specify a repeat state.  Equivalent to
- *	kdb_register_flags with flags set to 0.
- * Inputs:
- *	cmd	Command name
- *	func	Function to execute the command
- *	usage	A simple usage string showing arguments
- *	help	A simple help string describing command
- * Returns:
- *	zero for success, one if a duplicate command.
+/**
+ * kdb_unregister() - This function is used to unregister a kernel debugger
+ *                    command. It is generally called when a module which
+ *                    implements kdb command is unloaded.
+ * @cmd: pointer to kdb command
  */
-int kdb_register(char *cmd,
-	     kdb_func_t func,
-	     char *usage,
-	     char *help,
-	     short minlen)
+void kdb_unregister(kdbtab_t *cmd)
 {
-	return kdb_register_flags(cmd, func, usage, help, minlen, 0);
-}
-EXPORT_SYMBOL_GPL(kdb_register);
-
-/*
- * kdb_unregister - This function is used to unregister a kernel
- *	debugger command.  It is generally called when a module which
- *	implements kdb commands is unloaded.
- * Inputs:
- *	cmd	Command name
- * Returns:
- *	zero for success, one command not registered.
- */
-int kdb_unregister(char *cmd)
-{
-	kdbtab_t *kp;
-
-	/*
-	 *  find the command.
-	 */
-	list_for_each_entry(kp, &kdb_cmds_head, list_node) {
-		if (strcmp(kp->cmd_name, cmd) == 0) {
-			list_del(&kp->list_node);
-			if (kp->is_dynamic)
-				kfree(kp);
-			return 0;
-		}
-	}
-
-	/* Couldn't find it.  */
-	return 1;
+	list_del(&cmd->list_node);
 }
 EXPORT_SYMBOL_GPL(kdb_unregister);
 
 static kdbtab_t maintab[] = {
-	{	.cmd_name = "md",
-		.cmd_func = kdb_md,
-		.cmd_usage = "<vaddr>",
-		.cmd_help = "Display Memory Contents, also mdWcN, e.g. md8c1",
-		.cmd_minlen = 1,
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+	{	.name = "md",
+		.func = kdb_md,
+		.usage = "<vaddr>",
+		.help = "Display Memory Contents, also mdWcN, e.g. md8c1",
+		.minlen = 1,
+		.flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "mdr",
-		.cmd_func = kdb_md,
-		.cmd_usage = "<vaddr> <bytes>",
-		.cmd_help = "Display Raw Memory",
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+	{	.name = "mdr",
+		.func = kdb_md,
+		.usage = "<vaddr> <bytes>",
+		.help = "Display Raw Memory",
+		.flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "mdp",
-		.cmd_func = kdb_md,
-		.cmd_usage = "<paddr> <bytes>",
-		.cmd_help = "Display Physical Memory",
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+	{	.name = "mdp",
+		.func = kdb_md,
+		.usage = "<paddr> <bytes>",
+		.help = "Display Physical Memory",
+		.flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "mds",
-		.cmd_func = kdb_md,
-		.cmd_usage = "<vaddr>",
-		.cmd_help = "Display Memory Symbolically",
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
+	{	.name = "mds",
+		.func = kdb_md,
+		.usage = "<vaddr>",
+		.help = "Display Memory Symbolically",
+		.flags = KDB_ENABLE_MEM_READ | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "mm",
-		.cmd_func = kdb_mm,
-		.cmd_usage = "<vaddr> <contents>",
-		.cmd_help = "Modify Memory Contents",
-		.cmd_flags = KDB_ENABLE_MEM_WRITE | KDB_REPEAT_NO_ARGS,
+	{	.name = "mm",
+		.func = kdb_mm,
+		.usage = "<vaddr> <contents>",
+		.help = "Modify Memory Contents",
+		.flags = KDB_ENABLE_MEM_WRITE | KDB_REPEAT_NO_ARGS,
 	},
-	{	.cmd_name = "go",
-		.cmd_func = kdb_go,
-		.cmd_usage = "[<vaddr>]",
-		.cmd_help = "Continue Execution",
-		.cmd_minlen = 1,
-		.cmd_flags = KDB_ENABLE_REG_WRITE |
+	{	.name = "go",
+		.func = kdb_go,
+		.usage = "[<vaddr>]",
+		.help = "Continue Execution",
+		.minlen = 1,
+		.flags = KDB_ENABLE_REG_WRITE |
 			     KDB_ENABLE_ALWAYS_SAFE_NO_ARGS,
 	},
-	{	.cmd_name = "rd",
-		.cmd_func = kdb_rd,
-		.cmd_usage = "",
-		.cmd_help = "Display Registers",
-		.cmd_flags = KDB_ENABLE_REG_READ,
+	{	.name = "rd",
+		.func = kdb_rd,
+		.usage = "",
+		.help = "Display Registers",
+		.flags = KDB_ENABLE_REG_READ,
 	},
-	{	.cmd_name = "rm",
-		.cmd_func = kdb_rm,
-		.cmd_usage = "<reg> <contents>",
-		.cmd_help = "Modify Registers",
-		.cmd_flags = KDB_ENABLE_REG_WRITE,
+	{	.name = "rm",
+		.func = kdb_rm,
+		.usage = "<reg> <contents>",
+		.help = "Modify Registers",
+		.flags = KDB_ENABLE_REG_WRITE,
 	},
-	{	.cmd_name = "ef",
-		.cmd_func = kdb_ef,
-		.cmd_usage = "<vaddr>",
-		.cmd_help = "Display exception frame",
-		.cmd_flags = KDB_ENABLE_MEM_READ,
+	{	.name = "ef",
+		.func = kdb_ef,
+		.usage = "<vaddr>",
+		.help = "Display exception frame",
+		.flags = KDB_ENABLE_MEM_READ,
 	},
-	{	.cmd_name = "bt",
-		.cmd_func = kdb_bt,
-		.cmd_usage = "[<vaddr>]",
-		.cmd_help = "Stack traceback",
-		.cmd_minlen = 1,
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
+	{	.name = "bt",
+		.func = kdb_bt,
+		.usage = "[<vaddr>]",
+		.help = "Stack traceback",
+		.minlen = 1,
+		.flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
 	},
-	{	.cmd_name = "btp",
-		.cmd_func = kdb_bt,
-		.cmd_usage = "<pid>",
-		.cmd_help = "Display stack for process <pid>",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "btp",
+		.func = kdb_bt,
+		.usage = "<pid>",
+		.help = "Display stack for process <pid>",
+		.flags = KDB_ENABLE_INSPECT,
 	},
-	{	.cmd_name = "bta",
-		.cmd_func = kdb_bt,
-		.cmd_usage = "[D|R|S|T|C|Z|E|U|I|M|A]",
-		.cmd_help = "Backtrace all processes matching state flag",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "bta",
+		.func = kdb_bt,
+		.usage = "[D|R|S|T|C|Z|E|U|I|M|A]",
+		.help = "Backtrace all processes matching state flag",
+		.flags = KDB_ENABLE_INSPECT,
 	},
-	{	.cmd_name = "btc",
-		.cmd_func = kdb_bt,
-		.cmd_usage = "",
-		.cmd_help = "Backtrace current process on each cpu",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "btc",
+		.func = kdb_bt,
+		.usage = "",
+		.help = "Backtrace current process on each cpu",
+		.flags = KDB_ENABLE_INSPECT,
 	},
-	{	.cmd_name = "btt",
-		.cmd_func = kdb_bt,
-		.cmd_usage = "<vaddr>",
-		.cmd_help = "Backtrace process given its struct task address",
-		.cmd_flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
+	{	.name = "btt",
+		.func = kdb_bt,
+		.usage = "<vaddr>",
+		.help = "Backtrace process given its struct task address",
+		.flags = KDB_ENABLE_MEM_READ | KDB_ENABLE_INSPECT_NO_ARGS,
 	},
-	{	.cmd_name = "env",
-		.cmd_func = kdb_env,
-		.cmd_usage = "",
-		.cmd_help = "Show environment variables",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "env",
+		.func = kdb_env,
+		.usage = "",
+		.help = "Show environment variables",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "set",
-		.cmd_func = kdb_set,
-		.cmd_usage = "",
-		.cmd_help = "Set environment variables",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "set",
+		.func = kdb_set,
+		.usage = "",
+		.help = "Set environment variables",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "help",
-		.cmd_func = kdb_help,
-		.cmd_usage = "",
-		.cmd_help = "Display Help Message",
-		.cmd_minlen = 1,
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "help",
+		.func = kdb_help,
+		.usage = "",
+		.help = "Display Help Message",
+		.minlen = 1,
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "?",
-		.cmd_func = kdb_help,
-		.cmd_usage = "",
-		.cmd_help = "Display Help Message",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "?",
+		.func = kdb_help,
+		.usage = "",
+		.help = "Display Help Message",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "cpu",
-		.cmd_func = kdb_cpu,
-		.cmd_usage = "<cpunum>",
-		.cmd_help = "Switch to new cpu",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE_NO_ARGS,
+	{	.name = "cpu",
+		.func = kdb_cpu,
+		.usage = "<cpunum>",
+		.help = "Switch to new cpu",
+		.flags = KDB_ENABLE_ALWAYS_SAFE_NO_ARGS,
 	},
-	{	.cmd_name = "kgdb",
-		.cmd_func = kdb_kgdb,
-		.cmd_usage = "",
-		.cmd_help = "Enter kgdb mode",
-		.cmd_flags = 0,
+	{	.name = "kgdb",
+		.func = kdb_kgdb,
+		.usage = "",
+		.help = "Enter kgdb mode",
+		.flags = 0,
 	},
-	{	.cmd_name = "ps",
-		.cmd_func = kdb_ps,
-		.cmd_usage = "[<flags>|A]",
-		.cmd_help = "Display active task list",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "ps",
+		.func = kdb_ps,
+		.usage = "[<flags>|A]",
+		.help = "Display active task list",
+		.flags = KDB_ENABLE_INSPECT,
 	},
-	{	.cmd_name = "pid",
-		.cmd_func = kdb_pid,
-		.cmd_usage = "<pidnum>",
-		.cmd_help = "Switch to another task",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "pid",
+		.func = kdb_pid,
+		.usage = "<pidnum>",
+		.help = "Switch to another task",
+		.flags = KDB_ENABLE_INSPECT,
 	},
-	{	.cmd_name = "reboot",
-		.cmd_func = kdb_reboot,
-		.cmd_usage = "",
-		.cmd_help = "Reboot the machine immediately",
-		.cmd_flags = KDB_ENABLE_REBOOT,
+	{	.name = "reboot",
+		.func = kdb_reboot,
+		.usage = "",
+		.help = "Reboot the machine immediately",
+		.flags = KDB_ENABLE_REBOOT,
 	},
 #if defined(CONFIG_MODULES)
-	{	.cmd_name = "lsmod",
-		.cmd_func = kdb_lsmod,
-		.cmd_usage = "",
-		.cmd_help = "List loaded kernel modules",
-		.cmd_flags = KDB_ENABLE_INSPECT,
+	{	.name = "lsmod",
+		.func = kdb_lsmod,
+		.usage = "",
+		.help = "List loaded kernel modules",
+		.flags = KDB_ENABLE_INSPECT,
 	},
 #endif
 #if defined(CONFIG_MAGIC_SYSRQ)
-	{	.cmd_name = "sr",
-		.cmd_func = kdb_sr,
-		.cmd_usage = "<key>",
-		.cmd_help = "Magic SysRq key",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "sr",
+		.func = kdb_sr,
+		.usage = "<key>",
+		.help = "Magic SysRq key",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
 #endif
 #if defined(CONFIG_PRINTK)
-	{	.cmd_name = "dmesg",
-		.cmd_func = kdb_dmesg,
-		.cmd_usage = "[lines]",
-		.cmd_help = "Display syslog buffer",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "dmesg",
+		.func = kdb_dmesg,
+		.usage = "[lines]",
+		.help = "Display syslog buffer",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
 #endif
-	{	.cmd_name = "defcmd",
-		.cmd_func = kdb_defcmd,
-		.cmd_usage = "name \"usage\" \"help\"",
-		.cmd_help = "Define a set of commands, down to endefcmd",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "defcmd",
+		.func = kdb_defcmd,
+		.usage = "name \"usage\" \"help\"",
+		.help = "Define a set of commands, down to endefcmd",
+		/*
+		 * Macros are always safe because when executed each
+		 * internal command re-enters kdb_parse() and is safety
+		 * checked individually.
+		 */
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "kill",
-		.cmd_func = kdb_kill,
-		.cmd_usage = "<-signal> <pid>",
-		.cmd_help = "Send a signal to a process",
-		.cmd_flags = KDB_ENABLE_SIGNAL,
+	{	.name = "kill",
+		.func = kdb_kill,
+		.usage = "<-signal> <pid>",
+		.help = "Send a signal to a process",
+		.flags = KDB_ENABLE_SIGNAL,
 	},
-	{	.cmd_name = "summary",
-		.cmd_func = kdb_summary,
-		.cmd_usage = "",
-		.cmd_help = "Summarize the system",
-		.cmd_minlen = 4,
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "summary",
+		.func = kdb_summary,
+		.usage = "",
+		.help = "Summarize the system",
+		.minlen = 4,
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
-	{	.cmd_name = "per_cpu",
-		.cmd_func = kdb_per_cpu,
-		.cmd_usage = "<sym> [<bytes>] [<cpu>]",
-		.cmd_help = "Display per_cpu variables",
-		.cmd_minlen = 3,
-		.cmd_flags = KDB_ENABLE_MEM_READ,
+	{	.name = "per_cpu",
+		.func = kdb_per_cpu,
+		.usage = "<sym> [<bytes>] [<cpu>]",
+		.help = "Display per_cpu variables",
+		.minlen = 3,
+		.flags = KDB_ENABLE_MEM_READ,
 	},
-	{	.cmd_name = "grephelp",
-		.cmd_func = kdb_grep_help,
-		.cmd_usage = "",
-		.cmd_help = "Display help on | grep",
-		.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	{	.name = "grephelp",
+		.func = kdb_grep_help,
+		.usage = "",
+		.help = "Display help on | grep",
+		.flags = KDB_ENABLE_ALWAYS_SAFE,
 	},
 };
 
 static kdbtab_t nmicmd = {
-	.cmd_name = "disable_nmi",
-	.cmd_func = kdb_disable_nmi,
-	.cmd_usage = "",
-	.cmd_help = "Disable NMI entry to KDB",
-	.cmd_flags = KDB_ENABLE_ALWAYS_SAFE,
+	.name = "disable_nmi",
+	.func = kdb_disable_nmi,
+	.usage = "",
+	.help = "Disable NMI entry to KDB",
+	.flags = KDB_ENABLE_ALWAYS_SAFE,
 };
 
 /* Initialize the kdb command table. */
diff --git a/kernel/debug/kdb/kdb_private.h b/kernel/debug/kdb/kdb_private.h
index 170c69aedebb..629590084a0d 100644
--- a/kernel/debug/kdb/kdb_private.h
+++ b/kernel/debug/kdb/kdb_private.h
@@ -109,7 +109,6 @@ extern int kdbgetaddrarg(int, const char **, int*, unsigned long *,
 			 long *, char **);
 extern int kdbgetsymval(const char *, kdb_symtab_t *);
 extern int kdbnearsym(unsigned long, kdb_symtab_t *);
-extern void kdbnearsym_cleanup(void);
 extern char *kdb_strdup(const char *str, gfp_t type);
 extern void kdb_symbol_print(unsigned long, const kdb_symtab_t *, unsigned int);
 
@@ -165,19 +164,6 @@ typedef struct _kdb_bp {
 #ifdef CONFIG_KGDB_KDB
 extern kdb_bp_t kdb_breakpoints[/* KDB_MAXBPT */];
 
-/* The KDB shell command table */
-typedef struct _kdbtab {
-	char    *cmd_name;		/* Command name */
-	kdb_func_t cmd_func;		/* Function to execute command */
-	char    *cmd_usage;		/* Usage String for this command */
-	char    *cmd_help;		/* Help message for this command */
-	short    cmd_minlen;		/* Minimum legal # command
-					 * chars required */
-	kdb_cmdflags_t cmd_flags;	/* Command behaviour flags */
-	struct list_head list_node;	/* Command list */
-	bool    is_dynamic;		/* Command table allocation type */
-} kdbtab_t;
-
 extern void kdb_register_table(kdbtab_t *kp, size_t len);
 extern int kdb_bt(int, const char **);	/* KDB display back trace */
 
@@ -233,10 +219,6 @@ extern struct task_struct *kdb_curr_task(int);
 
 #define GFP_KDB (in_dbg_master() ? GFP_ATOMIC : GFP_KERNEL)
 
-extern void *debug_kmalloc(size_t size, gfp_t flags);
-extern void debug_kfree(void *);
-extern void debug_kusage(void);
-
 extern struct task_struct *kdb_current_task;
 extern struct pt_regs *kdb_current_regs;
 
diff --git a/kernel/debug/kdb/kdb_support.c b/kernel/debug/kdb/kdb_support.c
index 4f9950678e7b..7507d9a8dc6a 100644
--- a/kernel/debug/kdb/kdb_support.c
+++ b/kernel/debug/kdb/kdb_support.c
@@ -51,48 +51,48 @@ int kdbgetsymval(const char *symname, kdb_symtab_t *symtab)
 }
 EXPORT_SYMBOL(kdbgetsymval);
 
-static char *kdb_name_table[100];	/* arbitrary size */
-
-/*
- * kdbnearsym -	Return the name of the symbol with the nearest address
- *	less than 'addr'.
+/**
+ * kdbnearsym() - Return the name of the symbol with the nearest address
+ *                less than @addr.
+ * @addr: Address to check for near symbol
+ * @symtab: Structure to receive results
  *
- * Parameters:
- *	addr	Address to check for symbol near
- *	symtab  Structure to receive results
- * Returns:
- *	0	No sections contain this address, symtab zero filled
- *	1	Address mapped to module/symbol/section, data in symtab
- * Remarks:
- *	2.6 kallsyms has a "feature" where it unpacks the name into a
- *	string.  If that string is reused before the caller expects it
- *	then the caller sees its string change without warning.  To
- *	avoid cluttering up the main kdb code with lots of kdb_strdup,
- *	tests and kfree calls, kdbnearsym maintains an LRU list of the
- *	last few unique strings.  The list is sized large enough to
- *	hold active strings, no kdb caller of kdbnearsym makes more
- *	than ~20 later calls before using a saved value.
+ * WARNING: This function may return a pointer to a single statically
+ * allocated buffer (namebuf). kdb's unusual calling context (single
+ * threaded, all other CPUs halted) provides us sufficient locking for
+ * this to be safe. The only constraint imposed by the static buffer is
+ * that the caller must consume any previous reply prior to another call
+ * to lookup a new symbol.
+ *
+ * Note that, strictly speaking, some architectures may re-enter the kdb
+ * trap if the system turns out to be very badly damaged and this breaks
+ * the single-threaded assumption above. In these circumstances successful
+ * continuation and exit from the inner trap is unlikely to work and any
+ * user attempting this receives a prominent warning before being allowed
+ * to progress. In these circumstances we remain memory safe because
+ * namebuf[KSYM_NAME_LEN-1] will never change from '\0' although we do
+ * tolerate the possibility of garbled symbol display from the outer kdb
+ * trap.
+ *
+ * Return:
+ * * 0 - No sections contain this address, symtab zero filled
+ * * 1 - Address mapped to module/symbol/section, data in symtab
  */
 int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab)
 {
 	int ret = 0;
 	unsigned long symbolsize = 0;
 	unsigned long offset = 0;
-#define knt1_size 128		/* must be >= kallsyms table size */
-	char *knt1 = NULL;
+	static char namebuf[KSYM_NAME_LEN];
 
 	kdb_dbg_printf(AR, "addr=0x%lx, symtab=%px\n", addr, symtab);
 	memset(symtab, 0, sizeof(*symtab));
 
 	if (addr < 4096)
 		goto out;
-	knt1 = debug_kmalloc(knt1_size, GFP_ATOMIC);
-	if (!knt1) {
-		kdb_func_printf("addr=0x%lx cannot kmalloc knt1\n", addr);
-		goto out;
-	}
+
 	symtab->sym_name = kallsyms_lookup(addr, &symbolsize , &offset,
-				(char **)(&symtab->mod_name), knt1);
+				(char **)(&symtab->mod_name), namebuf);
 	if (offset > 8*1024*1024) {
 		symtab->sym_name = NULL;
 		addr = offset = symbolsize = 0;
@@ -101,63 +101,14 @@ int kdbnearsym(unsigned long addr, kdb_symtab_t *symtab)
 	symtab->sym_end = symtab->sym_start + symbolsize;
 	ret = symtab->sym_name != NULL && *(symtab->sym_name) != '\0';
 
-	if (ret) {
-		int i;
-		/* Another 2.6 kallsyms "feature".  Sometimes the sym_name is
-		 * set but the buffer passed into kallsyms_lookup is not used,
-		 * so it contains garbage.  The caller has to work out which
-		 * buffer needs to be saved.
-		 *
-		 * What was Rusty smoking when he wrote that code?
-		 */
-		if (symtab->sym_name != knt1) {
-			strncpy(knt1, symtab->sym_name, knt1_size);
-			knt1[knt1_size-1] = '\0';
-		}
-		for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) {
-			if (kdb_name_table[i] &&
-			    strcmp(kdb_name_table[i], knt1) == 0)
-				break;
-		}
-		if (i >= ARRAY_SIZE(kdb_name_table)) {
-			debug_kfree(kdb_name_table[0]);
-			memmove(kdb_name_table, kdb_name_table+1,
-			       sizeof(kdb_name_table[0]) *
-			       (ARRAY_SIZE(kdb_name_table)-1));
-		} else {
-			debug_kfree(knt1);
-			knt1 = kdb_name_table[i];
-			memmove(kdb_name_table+i, kdb_name_table+i+1,
-			       sizeof(kdb_name_table[0]) *
-			       (ARRAY_SIZE(kdb_name_table)-i-1));
-		}
-		i = ARRAY_SIZE(kdb_name_table) - 1;
-		kdb_name_table[i] = knt1;
-		symtab->sym_name = kdb_name_table[i];
-		knt1 = NULL;
-	}
-
 	if (symtab->mod_name == NULL)
 		symtab->mod_name = "kernel";
 	kdb_dbg_printf(AR, "returns %d symtab->sym_start=0x%lx, symtab->mod_name=%px, symtab->sym_name=%px (%s)\n",
 		       ret, symtab->sym_start, symtab->mod_name, symtab->sym_name, symtab->sym_name);
-
 out:
-	debug_kfree(knt1);
 	return ret;
 }
 
-void kdbnearsym_cleanup(void)
-{
-	int i;
-	for (i = 0; i < ARRAY_SIZE(kdb_name_table); ++i) {
-		if (kdb_name_table[i]) {
-			debug_kfree(kdb_name_table[i]);
-			kdb_name_table[i] = NULL;
-		}
-	}
-}
-
 static char ks_namebuf[KSYM_NAME_LEN+1], ks_namebuf_prev[KSYM_NAME_LEN+1];
 
 /*
@@ -655,230 +606,6 @@ unsigned long kdb_task_state(const struct task_struct *p, unsigned long mask)
 	return (mask & kdb_task_state_string(state)) != 0;
 }
 
-/* Last ditch allocator for debugging, so we can still debug even when
- * the GFP_ATOMIC pool has been exhausted.  The algorithms are tuned
- * for space usage, not for speed.  One smallish memory pool, the free
- * chain is always in ascending address order to allow coalescing,
- * allocations are done in brute force best fit.
- */
-
-struct debug_alloc_header {
-	u32 next;	/* offset of next header from start of pool */
-	u32 size;
-	void *caller;
-};
-
-/* The memory returned by this allocator must be aligned, which means
- * so must the header size.  Do not assume that sizeof(struct
- * debug_alloc_header) is a multiple of the alignment, explicitly
- * calculate the overhead of this header, including the alignment.
- * The rest of this code must not use sizeof() on any header or
- * pointer to a header.
- */
-#define dah_align 8
-#define dah_overhead ALIGN(sizeof(struct debug_alloc_header), dah_align)
-
-static u64 debug_alloc_pool_aligned[256*1024/dah_align];	/* 256K pool */
-static char *debug_alloc_pool = (char *)debug_alloc_pool_aligned;
-static u32 dah_first, dah_first_call = 1, dah_used, dah_used_max;
-
-/* Locking is awkward.  The debug code is called from all contexts,
- * including non maskable interrupts.  A normal spinlock is not safe
- * in NMI context.  Try to get the debug allocator lock, if it cannot
- * be obtained after a second then give up.  If the lock could not be
- * previously obtained on this cpu then only try once.
- *
- * sparse has no annotation for "this function _sometimes_ acquires a
- * lock", so fudge the acquire/release notation.
- */
-static DEFINE_SPINLOCK(dap_lock);
-static int get_dap_lock(void)
-	__acquires(dap_lock)
-{
-	static int dap_locked = -1;
-	int count;
-	if (dap_locked == smp_processor_id())
-		count = 1;
-	else
-		count = 1000;
-	while (1) {
-		if (spin_trylock(&dap_lock)) {
-			dap_locked = -1;
-			return 1;
-		}
-		if (!count--)
-			break;
-		udelay(1000);
-	}
-	dap_locked = smp_processor_id();
-	__acquire(dap_lock);
-	return 0;
-}
-
-void *debug_kmalloc(size_t size, gfp_t flags)
-{
-	unsigned int rem, h_offset;
-	struct debug_alloc_header *best, *bestprev, *prev, *h;
-	void *p = NULL;
-	if (!get_dap_lock()) {
-		__release(dap_lock);	/* we never actually got it */
-		return NULL;
-	}
-	h = (struct debug_alloc_header *)(debug_alloc_pool + dah_first);
-	if (dah_first_call) {
-		h->size = sizeof(debug_alloc_pool_aligned) - dah_overhead;
-		dah_first_call = 0;
-	}
-	size = ALIGN(size, dah_align);
-	prev = best = bestprev = NULL;
-	while (1) {
-		if (h->size >= size && (!best || h->size < best->size)) {
-			best = h;
-			bestprev = prev;
-			if (h->size == size)
-				break;
-		}
-		if (!h->next)
-			break;
-		prev = h;
-		h = (struct debug_alloc_header *)(debug_alloc_pool + h->next);
-	}
-	if (!best)
-		goto out;
-	rem = best->size - size;
-	/* The pool must always contain at least one header */
-	if (best->next == 0 && bestprev == NULL && rem < dah_overhead)
-		goto out;
-	if (rem >= dah_overhead) {
-		best->size = size;
-		h_offset = ((char *)best - debug_alloc_pool) +
-			   dah_overhead + best->size;
-		h = (struct debug_alloc_header *)(debug_alloc_pool + h_offset);
-		h->size = rem - dah_overhead;
-		h->next = best->next;
-	} else
-		h_offset = best->next;
-	best->caller = __builtin_return_address(0);
-	dah_used += best->size;
-	dah_used_max = max(dah_used, dah_used_max);
-	if (bestprev)
-		bestprev->next = h_offset;
-	else
-		dah_first = h_offset;
-	p = (char *)best + dah_overhead;
-	memset(p, POISON_INUSE, best->size - 1);
-	*((char *)p + best->size - 1) = POISON_END;
-out:
-	spin_unlock(&dap_lock);
-	return p;
-}
-
-void debug_kfree(void *p)
-{
-	struct debug_alloc_header *h;
-	unsigned int h_offset;
-	if (!p)
-		return;
-	if ((char *)p < debug_alloc_pool ||
-	    (char *)p >= debug_alloc_pool + sizeof(debug_alloc_pool_aligned)) {
-		kfree(p);
-		return;
-	}
-	if (!get_dap_lock()) {
-		__release(dap_lock);	/* we never actually got it */
-		return;		/* memory leak, cannot be helped */
-	}
-	h = (struct debug_alloc_header *)((char *)p - dah_overhead);
-	memset(p, POISON_FREE, h->size - 1);
-	*((char *)p + h->size - 1) = POISON_END;
-	h->caller = NULL;
-	dah_used -= h->size;
-	h_offset = (char *)h - debug_alloc_pool;
-	if (h_offset < dah_first) {
-		h->next = dah_first;
-		dah_first = h_offset;
-	} else {
-		struct debug_alloc_header *prev;
-		unsigned int prev_offset;
-		prev = (struct debug_alloc_header *)(debug_alloc_pool +
-						     dah_first);
-		while (1) {
-			if (!prev->next || prev->next > h_offset)
-				break;
-			prev = (struct debug_alloc_header *)
-				(debug_alloc_pool + prev->next);
-		}
-		prev_offset = (char *)prev - debug_alloc_pool;
-		if (prev_offset + dah_overhead + prev->size == h_offset) {
-			prev->size += dah_overhead + h->size;
-			memset(h, POISON_FREE, dah_overhead - 1);
-			*((char *)h + dah_overhead - 1) = POISON_END;
-			h = prev;
-			h_offset = prev_offset;
-		} else {
-			h->next = prev->next;
-			prev->next = h_offset;
-		}
-	}
-	if (h_offset + dah_overhead + h->size == h->next) {
-		struct debug_alloc_header *next;
-		next = (struct debug_alloc_header *)
-			(debug_alloc_pool + h->next);
-		h->size += dah_overhead + next->size;
-		h->next = next->next;
-		memset(next, POISON_FREE, dah_overhead - 1);
-		*((char *)next + dah_overhead - 1) = POISON_END;
-	}
-	spin_unlock(&dap_lock);
-}
-
-void debug_kusage(void)
-{
-	struct debug_alloc_header *h_free, *h_used;
-#ifdef	CONFIG_IA64
-	/* FIXME: using dah for ia64 unwind always results in a memory leak.
-	 * Fix that memory leak first, then set debug_kusage_one_time = 1 for
-	 * all architectures.
-	 */
-	static int debug_kusage_one_time;
-#else
-	static int debug_kusage_one_time = 1;
-#endif
-	if (!get_dap_lock()) {
-		__release(dap_lock);	/* we never actually got it */
-		return;
-	}
-	h_free = (struct debug_alloc_header *)(debug_alloc_pool + dah_first);
-	if (dah_first == 0 &&
-	    (h_free->size == sizeof(debug_alloc_pool_aligned) - dah_overhead ||
-	     dah_first_call))
-		goto out;
-	if (!debug_kusage_one_time)
-		goto out;
-	debug_kusage_one_time = 0;
-	kdb_func_printf("debug_kmalloc memory leak dah_first %d\n", dah_first);
-	if (dah_first) {
-		h_used = (struct debug_alloc_header *)debug_alloc_pool;
-		kdb_func_printf("h_used %px size %d\n", h_used, h_used->size);
-	}
-	do {
-		h_used = (struct debug_alloc_header *)
-			  ((char *)h_free + dah_overhead + h_free->size);
-		kdb_func_printf("h_used %px size %d caller %px\n",
-				h_used, h_used->size, h_used->caller);
-		h_free = (struct debug_alloc_header *)
-			  (debug_alloc_pool + h_free->next);
-	} while (h_free->next);
-	h_used = (struct debug_alloc_header *)
-		  ((char *)h_free + dah_overhead + h_free->size);
-	if ((char *)h_used - debug_alloc_pool !=
-	    sizeof(debug_alloc_pool_aligned))
-		kdb_func_printf("h_used %px size %d caller %px\n",
-				h_used, h_used->size, h_used->caller);
-out:
-	spin_unlock(&dap_lock);
-}
-
 /* Maintain a small stack of kdb_flags to allow recursion without disturbing
  * the global kdb state.
  */
diff --git a/kernel/fork.c b/kernel/fork.c
index 6d2e10a3df0b..38681ad44c76 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -1063,6 +1063,7 @@ static struct mm_struct *mm_init(struct mm_struct *mm, struct task_struct *p,
 	mm->pmd_huge_pte = NULL;
 #endif
 	mm_init_uprobes_state(mm);
+	hugetlb_count_init(mm);
 
 	if (current->mm) {
 		mm->flags = current->mm->flags & MMF_INIT_MASK;
@@ -1262,7 +1263,6 @@ struct file *get_mm_exe_file(struct mm_struct *mm)
 	rcu_read_unlock();
 	return exe_file;
 }
-EXPORT_SYMBOL(get_mm_exe_file);
 
 /**
  * get_task_exe_file - acquire a reference to the task's executable file
@@ -1285,7 +1285,6 @@ struct file *get_task_exe_file(struct task_struct *task)
 	task_unlock(task);
 	return exe_file;
 }
-EXPORT_SYMBOL(get_task_exe_file);
 
 /**
  * get_task_mm - acquire a reference to the task's mm
diff --git a/kernel/kexec.c b/kernel/kexec.c
index c82c6c06f051..b5e40f069768 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -19,26 +19,9 @@
 
 #include "kexec_internal.h"
 
-static int copy_user_segment_list(struct kimage *image,
-				  unsigned long nr_segments,
-				  struct kexec_segment __user *segments)
-{
-	int ret;
-	size_t segment_bytes;
-
-	/* Read in the segments */
-	image->nr_segments = nr_segments;
-	segment_bytes = nr_segments * sizeof(*segments);
-	ret = copy_from_user(image->segment, segments, segment_bytes);
-	if (ret)
-		ret = -EFAULT;
-
-	return ret;
-}
-
 static int kimage_alloc_init(struct kimage **rimage, unsigned long entry,
 			     unsigned long nr_segments,
-			     struct kexec_segment __user *segments,
+			     struct kexec_segment *segments,
 			     unsigned long flags)
 {
 	int ret;
@@ -58,10 +41,8 @@ static int kimage_alloc_init(struct kimage **rimage, unsigned long entry,
 		return -ENOMEM;
 
 	image->start = entry;
-
-	ret = copy_user_segment_list(image, nr_segments, segments);
-	if (ret)
-		goto out_free_image;
+	image->nr_segments = nr_segments;
+	memcpy(image->segment, segments, nr_segments * sizeof(*segments));
 
 	if (kexec_on_panic) {
 		/* Enable special crash kernel control page alloc policy. */
@@ -104,12 +85,23 @@ out_free_image:
 }
 
 static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
-		struct kexec_segment __user *segments, unsigned long flags)
+		struct kexec_segment *segments, unsigned long flags)
 {
 	struct kimage **dest_image, *image;
 	unsigned long i;
 	int ret;
 
+	/*
+	 * Because we write directly to the reserved memory region when loading
+	 * crash kernels we need a mutex here to prevent multiple crash kernels
+	 * from attempting to load simultaneously, and to prevent a crash kernel
+	 * from loading over the top of a in use crash kernel.
+	 *
+	 * KISS: always take the mutex.
+	 */
+	if (!mutex_trylock(&kexec_mutex))
+		return -EBUSY;
+
 	if (flags & KEXEC_ON_CRASH) {
 		dest_image = &kexec_crash_image;
 		if (kexec_crash_image)
@@ -121,7 +113,8 @@ static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
 	if (nr_segments == 0) {
 		/* Uninstall image */
 		kimage_free(xchg(dest_image, NULL));
-		return 0;
+		ret = 0;
+		goto out_unlock;
 	}
 	if (flags & KEXEC_ON_CRASH) {
 		/*
@@ -134,7 +127,7 @@ static int do_kexec_load(unsigned long entry, unsigned long nr_segments,
 
 	ret = kimage_alloc_init(&image, entry, nr_segments, segments, flags);
 	if (ret)
-		return ret;
+		goto out_unlock;
 
 	if (flags & KEXEC_PRESERVE_CONTEXT)
 		image->preserve_context = 1;
@@ -171,6 +164,8 @@ out:
 		arch_kexec_protect_crashkres();
 
 	kimage_free(image);
+out_unlock:
+	mutex_unlock(&kexec_mutex);
 	return ret;
 }
 
@@ -236,7 +231,8 @@ static inline int kexec_load_check(unsigned long nr_segments,
 SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments,
 		struct kexec_segment __user *, segments, unsigned long, flags)
 {
-	int result;
+	struct kexec_segment *ksegments;
+	unsigned long result;
 
 	result = kexec_load_check(nr_segments, flags);
 	if (result)
@@ -247,20 +243,12 @@ SYSCALL_DEFINE4(kexec_load, unsigned long, entry, unsigned long, nr_segments,
 		((flags & KEXEC_ARCH_MASK) != KEXEC_ARCH_DEFAULT))
 		return -EINVAL;
 
-	/* Because we write directly to the reserved memory
-	 * region when loading crash kernels we need a mutex here to
-	 * prevent multiple crash  kernels from attempting to load
-	 * simultaneously, and to prevent a crash kernel from loading
-	 * over the top of a in use crash kernel.
-	 *
-	 * KISS: always take the mutex.
-	 */
-	if (!mutex_trylock(&kexec_mutex))
-		return -EBUSY;
+	ksegments = memdup_user(segments, nr_segments * sizeof(ksegments[0]));
+	if (IS_ERR(ksegments))
+		return PTR_ERR(ksegments);
 
-	result = do_kexec_load(entry, nr_segments, segments, flags);
-
-	mutex_unlock(&kexec_mutex);
+	result = do_kexec_load(entry, nr_segments, ksegments, flags);
+	kfree(ksegments);
 
 	return result;
 }
@@ -272,7 +260,7 @@ COMPAT_SYSCALL_DEFINE4(kexec_load, compat_ulong_t, entry,
 		       compat_ulong_t, flags)
 {
 	struct compat_kexec_segment in;
-	struct kexec_segment out, __user *ksegments;
+	struct kexec_segment *ksegments;
 	unsigned long i, result;
 
 	result = kexec_load_check(nr_segments, flags);
@@ -285,37 +273,26 @@ COMPAT_SYSCALL_DEFINE4(kexec_load, compat_ulong_t, entry,
 	if ((flags & KEXEC_ARCH_MASK) == KEXEC_ARCH_DEFAULT)
 		return -EINVAL;
 
-	ksegments = compat_alloc_user_space(nr_segments * sizeof(out));
+	ksegments = kmalloc_array(nr_segments, sizeof(ksegments[0]),
+			GFP_KERNEL);
+	if (!ksegments)
+		return -ENOMEM;
+
 	for (i = 0; i < nr_segments; i++) {
 		result = copy_from_user(&in, &segments[i], sizeof(in));
 		if (result)
-			return -EFAULT;
+			goto fail;
 
-		out.buf   = compat_ptr(in.buf);
-		out.bufsz = in.bufsz;
-		out.mem   = in.mem;
-		out.memsz = in.memsz;
-
-		result = copy_to_user(&ksegments[i], &out, sizeof(out));
-		if (result)
-			return -EFAULT;
+		ksegments[i].buf   = compat_ptr(in.buf);
+		ksegments[i].bufsz = in.bufsz;
+		ksegments[i].mem   = in.mem;
+		ksegments[i].memsz = in.memsz;
 	}
 
-	/* Because we write directly to the reserved memory
-	 * region when loading crash kernels we need a mutex here to
-	 * prevent multiple crash  kernels from attempting to load
-	 * simultaneously, and to prevent a crash kernel from loading
-	 * over the top of a in use crash kernel.
-	 *
-	 * KISS: always take the mutex.
-	 */
-	if (!mutex_trylock(&kexec_mutex))
-		return -EBUSY;
-
 	result = do_kexec_load(entry, nr_segments, ksegments, flags);
 
-	mutex_unlock(&kexec_mutex);
-
+fail:
+	kfree(ksegments);
 	return result;
 }
 #endif
diff --git a/kernel/profile.c b/kernel/profile.c
index c2ebddb5e974..eb9c7f0f5ac5 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -41,7 +41,8 @@ struct profile_hit {
 #define NR_PROFILE_GRP		(NR_PROFILE_HIT/PROFILE_GRPSZ)
 
 static atomic_t *prof_buffer;
-static unsigned long prof_len, prof_shift;
+static unsigned long prof_len;
+static unsigned short int prof_shift;
 
 int prof_on __read_mostly;
 EXPORT_SYMBOL_GPL(prof_on);
@@ -67,8 +68,8 @@ int profile_setup(char *str)
 		if (str[strlen(sleepstr)] == ',')
 			str += strlen(sleepstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel sleep profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel sleep profiling enabled (shift: %u)\n",
 			prof_shift);
 #else
 		pr_warn("kernel sleep profiling requires CONFIG_SCHEDSTATS\n");
@@ -78,21 +79,21 @@ int profile_setup(char *str)
 		if (str[strlen(schedstr)] == ',')
 			str += strlen(schedstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel schedule profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel schedule profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
 		prof_on = KVM_PROFILING;
 		if (str[strlen(kvmstr)] == ',')
 			str += strlen(kvmstr) + 1;
 		if (get_option(&str, &par))
-			prof_shift = par;
-		pr_info("kernel KVM profiling enabled (shift: %ld)\n",
+			prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
+		pr_info("kernel KVM profiling enabled (shift: %u)\n",
 			prof_shift);
 	} else if (get_option(&str, &par)) {
-		prof_shift = par;
+		prof_shift = clamp(par, 0, BITS_PER_LONG - 1);
 		prof_on = CPU_PROFILING;
-		pr_info("kernel profiling enabled (shift: %ld)\n",
+		pr_info("kernel profiling enabled (shift: %u)\n",
 			prof_shift);
 	}
 	return 1;
@@ -468,7 +469,7 @@ read_profile(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 	unsigned long p = *ppos;
 	ssize_t read;
 	char *pnt;
-	unsigned int sample_step = 1 << prof_shift;
+	unsigned long sample_step = 1UL << prof_shift;
 
 	profile_flip_buffers();
 	if (p >= (prof_len+1)*sizeof(unsigned int))
diff --git a/kernel/sys.c b/kernel/sys.c
index b6aa704f861d..8fdac0d90504 100644
--- a/kernel/sys.c
+++ b/kernel/sys.c
@@ -1930,13 +1930,6 @@ static int validate_prctl_map_addr(struct prctl_mm_map *prctl_map)
 	error = -EINVAL;
 
 	/*
-	 * @brk should be after @end_data in traditional maps.
-	 */
-	if (prctl_map->start_brk <= prctl_map->end_data ||
-	    prctl_map->brk <= prctl_map->end_data)
-		goto out;
-
-	/*
 	 * Neither we should allow to override limits if they set.
 	 */
 	if (check_data_rlimit(rlimit(RLIMIT_DATA), prctl_map->brk,
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 64578adfe115..f43d89d92860 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -292,15 +292,10 @@ COND_SYSCALL(process_madvise);
 COND_SYSCALL(process_mrelease);
 COND_SYSCALL(remap_file_pages);
 COND_SYSCALL(mbind);
-COND_SYSCALL_COMPAT(mbind);
 COND_SYSCALL(get_mempolicy);
-COND_SYSCALL_COMPAT(get_mempolicy);
 COND_SYSCALL(set_mempolicy);
-COND_SYSCALL_COMPAT(set_mempolicy);
 COND_SYSCALL(migrate_pages);
-COND_SYSCALL_COMPAT(migrate_pages);
 COND_SYSCALL(move_pages);
-COND_SYSCALL_COMPAT(move_pages);
 
 COND_SYSCALL(perf_event_open);
 COND_SYSCALL(accept4);
diff --git a/kernel/trace/Kconfig b/kernel/trace/Kconfig
index 3ee23f4d437f..420ff4bc67fd 100644
--- a/kernel/trace/Kconfig
+++ b/kernel/trace/Kconfig
@@ -135,10 +135,9 @@ config TRACING_SUPPORT
 	depends on STACKTRACE_SUPPORT
 	default y
 
-if TRACING_SUPPORT
-
 menuconfig FTRACE
 	bool "Tracers"
+	depends on TRACING_SUPPORT
 	default y if DEBUG_KERNEL
 	help
 	  Enable the kernel tracing infrastructure.
@@ -1037,6 +1036,3 @@ config HIST_TRIGGERS_DEBUG
           If unsure, say N.
 
 endif # FTRACE
-
-endif # TRACING_SUPPORT
-
diff --git a/kernel/trace/Makefile b/kernel/trace/Makefile
index b1c47ccf4f73..6de5d4d63165 100644
--- a/kernel/trace/Makefile
+++ b/kernel/trace/Makefile
@@ -77,6 +77,7 @@ obj-$(CONFIG_EVENT_TRACING) += trace_event_perf.o
 endif
 obj-$(CONFIG_EVENT_TRACING) += trace_events_filter.o
 obj-$(CONFIG_EVENT_TRACING) += trace_events_trigger.o
+obj-$(CONFIG_PROBE_EVENTS) += trace_eprobe.o
 obj-$(CONFIG_TRACE_EVENT_INJECT) += trace_events_inject.o
 obj-$(CONFIG_SYNTH_EVENTS) += trace_events_synth.o
 obj-$(CONFIG_HIST_TRIGGERS) += trace_events_hist.o
diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c
index e592d1df6f88..c5a3fbf19617 100644
--- a/kernel/trace/ring_buffer.c
+++ b/kernel/trace/ring_buffer.c
@@ -2111,7 +2111,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 			}
 		}
 
-		get_online_cpus();
+		cpus_read_lock();
 		/*
 		 * Fire off all the required work handlers
 		 * We can't schedule on offline CPUs, but it's not necessary
@@ -2143,7 +2143,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 			cpu_buffer->nr_pages_to_update = 0;
 		}
 
-		put_online_cpus();
+		cpus_read_unlock();
 	} else {
 		cpu_buffer = buffer->buffers[cpu_id];
 
@@ -2171,7 +2171,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 			goto out_err;
 		}
 
-		get_online_cpus();
+		cpus_read_lock();
 
 		/* Can't run something on an offline CPU. */
 		if (!cpu_online(cpu_id))
@@ -2183,7 +2183,7 @@ int ring_buffer_resize(struct trace_buffer *buffer, unsigned long size,
 		}
 
 		cpu_buffer->nr_pages_to_update = 0;
-		put_online_cpus();
+		cpus_read_unlock();
 	}
 
  out:
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 2755534b0737..7896d30d90f7 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2603,6 +2603,15 @@ enum print_line_t trace_handle_return(struct trace_seq *s)
 }
 EXPORT_SYMBOL_GPL(trace_handle_return);
 
+static unsigned short migration_disable_value(void)
+{
+#if defined(CONFIG_SMP)
+	return current->migration_disabled;
+#else
+	return 0;
+#endif
+}
+
 unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
 {
 	unsigned int trace_flags = irqs_status;
@@ -2621,7 +2630,8 @@ unsigned int tracing_gen_ctx_irq_test(unsigned int irqs_status)
 		trace_flags |= TRACE_FLAG_NEED_RESCHED;
 	if (test_preempt_need_resched())
 		trace_flags |= TRACE_FLAG_PREEMPT_RESCHED;
-	return (trace_flags << 16) | (pc & 0xff);
+	return (trace_flags << 16) | (min_t(unsigned int, pc & 0xff, 0xf)) |
+		(min_t(unsigned int, migration_disable_value(), 0xf)) << 4;
 }
 
 struct ring_buffer_event *
@@ -3697,11 +3707,11 @@ static bool trace_safe_str(struct trace_iterator *iter, const char *str)
 		return false;
 
 	event = container_of(trace_event, struct trace_event_call, event);
-	if (!event->mod)
+	if ((event->flags & TRACE_EVENT_FL_DYNAMIC) || !event->module)
 		return false;
 
 	/* Would rather have rodata, but this will suffice */
-	if (within_module_core(addr, event->mod))
+	if (within_module_core(addr, event->module))
 		return true;
 
 	return false;
@@ -4189,9 +4199,10 @@ static void print_lat_help_header(struct seq_file *m)
 		    "#                  | / _----=> need-resched    \n"
 		    "#                  || / _---=> hardirq/softirq \n"
 		    "#                  ||| / _--=> preempt-depth   \n"
-		    "#                  |||| /     delay            \n"
-		    "#  cmd     pid     ||||| time  |   caller      \n"
-		    "#     \\   /        |||||  \\    |   /         \n");
+		    "#                  |||| / _-=> migrate-disable \n"
+		    "#                  ||||| /     delay           \n"
+		    "#  cmd     pid     |||||| time  |   caller     \n"
+		    "#     \\   /        ||||||  \\    |    /       \n");
 }
 
 static void print_event_info(struct array_buffer *buf, struct seq_file *m)
@@ -4229,9 +4240,10 @@ static void print_func_help_header_irq(struct array_buffer *buf, struct seq_file
 	seq_printf(m, "#                            %.*s / _----=> need-resched\n", prec, space);
 	seq_printf(m, "#                            %.*s| / _---=> hardirq/softirq\n", prec, space);
 	seq_printf(m, "#                            %.*s|| / _--=> preempt-depth\n", prec, space);
-	seq_printf(m, "#                            %.*s||| /     delay\n", prec, space);
-	seq_printf(m, "#           TASK-PID  %.*s CPU#  ||||   TIMESTAMP  FUNCTION\n", prec, "     TGID   ");
-	seq_printf(m, "#              | |    %.*s   |   ||||      |         |\n", prec, "       |    ");
+	seq_printf(m, "#                            %.*s||| / _-=> migrate-disable\n", prec, space);
+	seq_printf(m, "#                            %.*s|||| /     delay\n", prec, space);
+	seq_printf(m, "#           TASK-PID  %.*s CPU#  |||||  TIMESTAMP  FUNCTION\n", prec, "     TGID   ");
+	seq_printf(m, "#              | |    %.*s   |   |||||     |         |\n", prec, "       |    ");
 }
 
 void
@@ -5543,6 +5555,7 @@ static const char readme_msg[] =
 #ifdef CONFIG_HIST_TRIGGERS
 	"\t           s:[synthetic/]<event> <field> [<field>]\n"
 #endif
+	"\t           e[:[<group>/]<event>] <attached-group>.<attached-event> [<args>]\n"
 	"\t           -:[<group>/]<event>\n"
 #ifdef CONFIG_KPROBE_EVENTS
 	"\t    place: [<module>:]<symbol>[+<offset>]|<memaddr>\n"
@@ -5552,7 +5565,7 @@ static const char readme_msg[] =
   "   place (uprobe): <path>:<offset>[%return][(ref_ctr_offset)]\n"
 #endif
 	"\t     args: <name>=fetcharg[:type]\n"
-	"\t fetcharg: %<register>, @<address>, @<symbol>[+|-<offset>],\n"
+	"\t fetcharg: (%<register>|$<efield>), @<address>, @<symbol>[+|-<offset>],\n"
 #ifdef CONFIG_HAVE_FUNCTION_ARG_ACCESS_API
 	"\t           $stack<index>, $stack, $retval, $comm, $arg<N>,\n"
 #else
@@ -5567,6 +5580,8 @@ static const char readme_msg[] =
 	"\t    stype: u8/u16/u32/u64, s8/s16/s32/s64, pid_t,\n"
 	"\t           [unsigned] char/int/long\n"
 #endif
+	"\t    efield: For event probes ('e' types), the field is on of the fields\n"
+	"\t            of the <attached-group>/<attached-event>.\n"
 #endif
 	"  events/\t\t- Directory containing all trace event subsystems:\n"
 	"      enable\t\t- Write 0/1 to enable/disable tracing of all events\n"
@@ -5654,6 +5669,7 @@ static const char readme_msg[] =
 	"\t            .execname   display a common_pid as a program name\n"
 	"\t            .syscall    display a syscall id as a syscall name\n"
 	"\t            .log2       display log2 value rather than raw number\n"
+	"\t            .buckets=size  display values in groups of size rather than raw number\n"
 	"\t            .usecs      display a common_timestamp in microseconds\n\n"
 	"\t    The 'pause' parameter can be used to pause an existing hist\n"
 	"\t    trigger or to start a hist trigger but not log any events\n"
diff --git a/kernel/trace/trace.h b/kernel/trace/trace.h
index 4a0e693000c6..b7c0f8e160fb 100644
--- a/kernel/trace/trace.h
+++ b/kernel/trace/trace.h
@@ -126,6 +126,11 @@ struct kprobe_trace_entry_head {
 	unsigned long		ip;
 };
 
+struct eprobe_trace_entry_head {
+	struct trace_entry	ent;
+	unsigned int		type;
+};
+
 struct kretprobe_trace_entry_head {
 	struct trace_entry	ent;
 	unsigned long		func;
@@ -1508,9 +1513,14 @@ static inline int register_trigger_hist_enable_disable_cmds(void) { return 0; }
 extern int register_trigger_cmds(void);
 extern void clear_event_triggers(struct trace_array *tr);
 
+enum {
+	EVENT_TRIGGER_FL_PROBE		= BIT(0),
+};
+
 struct event_trigger_data {
 	unsigned long			count;
 	int				ref;
+	int				flags;
 	struct event_trigger_ops	*ops;
 	struct event_command		*cmd_ops;
 	struct event_filter __rcu	*filter;
@@ -1918,6 +1928,14 @@ static inline bool is_good_name(const char *name)
 	return true;
 }
 
+/* Convert certain expected symbols into '_' when generating event names */
+static inline void sanitize_event_name(char *name)
+{
+	while (*name++ != '\0')
+		if (*name == ':' || *name == '.')
+			*name = '_';
+}
+
 /*
  * This is a generic way to read and write a u64 value from a file in tracefs.
  *
diff --git a/kernel/trace/trace_boot.c b/kernel/trace/trace_boot.c
index 94ef2d099e32..8d252f63cd78 100644
--- a/kernel/trace/trace_boot.c
+++ b/kernel/trace/trace_boot.c
@@ -171,6 +171,289 @@ trace_boot_add_synth_event(struct xbc_node *node, const char *event)
 }
 #endif
 
+#ifdef CONFIG_HIST_TRIGGERS
+static int __init __printf(3, 4)
+append_printf(char **bufp, char *end, const char *fmt, ...)
+{
+	va_list args;
+	int ret;
+
+	if (*bufp == end)
+		return -ENOSPC;
+
+	va_start(args, fmt);
+	ret = vsnprintf(*bufp, end - *bufp, fmt, args);
+	if (ret < end - *bufp) {
+		*bufp += ret;
+	} else {
+		*bufp = end;
+		ret = -ERANGE;
+	}
+	va_end(args);
+
+	return ret;
+}
+
+static int __init
+append_str_nospace(char **bufp, char *end, const char *str)
+{
+	char *p = *bufp;
+	int len;
+
+	while (p < end - 1 && *str != '\0') {
+		if (!isspace(*str))
+			*(p++) = *str;
+		str++;
+	}
+	*p = '\0';
+	if (p == end - 1) {
+		*bufp = end;
+		return -ENOSPC;
+	}
+	len = p - *bufp;
+	*bufp = p;
+	return (int)len;
+}
+
+static int __init
+trace_boot_hist_add_array(struct xbc_node *hnode, char **bufp,
+			  char *end, const char *key)
+{
+	struct xbc_node *anode;
+	const char *p;
+	char sep;
+
+	p = xbc_node_find_value(hnode, key, &anode);
+	if (p) {
+		if (!anode) {
+			pr_err("hist.%s requires value(s).\n", key);
+			return -EINVAL;
+		}
+
+		append_printf(bufp, end, ":%s", key);
+		sep = '=';
+		xbc_array_for_each_value(anode, p) {
+			append_printf(bufp, end, "%c%s", sep, p);
+			if (sep == '=')
+				sep = ',';
+		}
+	} else
+		return -ENOENT;
+
+	return 0;
+}
+
+static int __init
+trace_boot_hist_add_one_handler(struct xbc_node *hnode, char **bufp,
+				char *end, const char *handler,
+				const char *param)
+{
+	struct xbc_node *knode, *anode;
+	const char *p;
+	char sep;
+
+	/* Compose 'handler' parameter */
+	p = xbc_node_find_value(hnode, param, NULL);
+	if (!p) {
+		pr_err("hist.%s requires '%s' option.\n",
+		       xbc_node_get_data(hnode), param);
+		return -EINVAL;
+	}
+	append_printf(bufp, end, ":%s(%s)", handler, p);
+
+	/* Compose 'action' parameter */
+	knode = xbc_node_find_subkey(hnode, "trace");
+	if (!knode)
+		knode = xbc_node_find_subkey(hnode, "save");
+
+	if (knode) {
+		anode = xbc_node_get_child(knode);
+		if (!anode || !xbc_node_is_value(anode)) {
+			pr_err("hist.%s.%s requires value(s).\n",
+			       xbc_node_get_data(hnode),
+			       xbc_node_get_data(knode));
+			return -EINVAL;
+		}
+
+		append_printf(bufp, end, ".%s", xbc_node_get_data(knode));
+		sep = '(';
+		xbc_array_for_each_value(anode, p) {
+			append_printf(bufp, end, "%c%s", sep, p);
+			if (sep == '(')
+				sep = ',';
+		}
+		append_printf(bufp, end, ")");
+	} else if (xbc_node_find_subkey(hnode, "snapshot")) {
+		append_printf(bufp, end, ".snapshot()");
+	} else {
+		pr_err("hist.%s requires an action.\n",
+		       xbc_node_get_data(hnode));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static int __init
+trace_boot_hist_add_handlers(struct xbc_node *hnode, char **bufp,
+			     char *end, const char *param)
+{
+	struct xbc_node *node;
+	const char *p, *handler;
+	int ret;
+
+	handler = xbc_node_get_data(hnode);
+
+	xbc_node_for_each_subkey(hnode, node) {
+		p = xbc_node_get_data(node);
+		if (!isdigit(p[0]))
+			continue;
+		/* All digit started node should be instances. */
+		ret = trace_boot_hist_add_one_handler(node, bufp, end, handler, param);
+		if (ret < 0)
+			break;
+	}
+
+	if (xbc_node_find_subkey(hnode, param))
+		ret = trace_boot_hist_add_one_handler(hnode, bufp, end, handler, param);
+
+	return ret;
+}
+
+/*
+ * Histogram boottime tracing syntax.
+ *
+ * ftrace.[instance.INSTANCE.]event.GROUP.EVENT.hist[.N] {
+ *	keys = <KEY>[,...]
+ *	values = <VAL>[,...]
+ *	sort = <SORT-KEY>[,...]
+ *	size = <ENTRIES>
+ *	name = <HISTNAME>
+ *	var { <VAR> = <EXPR> ... }
+ *	pause|continue|clear
+ *	onmax|onchange[.N] { var = <VAR>; <ACTION> [= <PARAM>] }
+ *	onmatch[.N] { event = <EVENT>; <ACTION> [= <PARAM>] }
+ *	filter = <FILTER>
+ * }
+ *
+ * Where <ACTION> are;
+ *
+ *	trace = <EVENT>, <ARG1>[, ...]
+ *	save = <ARG1>[, ...]
+ *	snapshot
+ */
+static int __init
+trace_boot_compose_hist_cmd(struct xbc_node *hnode, char *buf, size_t size)
+{
+	struct xbc_node *node, *knode;
+	char *end = buf + size;
+	const char *p;
+	int ret = 0;
+
+	append_printf(&buf, end, "hist");
+
+	ret = trace_boot_hist_add_array(hnode, &buf, end, "keys");
+	if (ret < 0) {
+		if (ret == -ENOENT)
+			pr_err("hist requires keys.\n");
+		return -EINVAL;
+	}
+
+	ret = trace_boot_hist_add_array(hnode, &buf, end, "values");
+	if (ret == -EINVAL)
+		return ret;
+	ret = trace_boot_hist_add_array(hnode, &buf, end, "sort");
+	if (ret == -EINVAL)
+		return ret;
+
+	p = xbc_node_find_value(hnode, "size", NULL);
+	if (p)
+		append_printf(&buf, end, ":size=%s", p);
+
+	p = xbc_node_find_value(hnode, "name", NULL);
+	if (p)
+		append_printf(&buf, end, ":name=%s", p);
+
+	node = xbc_node_find_subkey(hnode, "var");
+	if (node) {
+		xbc_node_for_each_key_value(node, knode, p) {
+			/* Expression must not include spaces. */
+			append_printf(&buf, end, ":%s=",
+				      xbc_node_get_data(knode));
+			append_str_nospace(&buf, end, p);
+		}
+	}
+
+	/* Histogram control attributes (mutual exclusive) */
+	if (xbc_node_find_value(hnode, "pause", NULL))
+		append_printf(&buf, end, ":pause");
+	else if (xbc_node_find_value(hnode, "continue", NULL))
+		append_printf(&buf, end, ":continue");
+	else if (xbc_node_find_value(hnode, "clear", NULL))
+		append_printf(&buf, end, ":clear");
+
+	/* Histogram handler and actions */
+	node = xbc_node_find_subkey(hnode, "onmax");
+	if (node && trace_boot_hist_add_handlers(node, &buf, end, "var") < 0)
+		return -EINVAL;
+	node = xbc_node_find_subkey(hnode, "onchange");
+	if (node && trace_boot_hist_add_handlers(node, &buf, end, "var") < 0)
+		return -EINVAL;
+	node = xbc_node_find_subkey(hnode, "onmatch");
+	if (node && trace_boot_hist_add_handlers(node, &buf, end, "event") < 0)
+		return -EINVAL;
+
+	p = xbc_node_find_value(hnode, "filter", NULL);
+	if (p)
+		append_printf(&buf, end, " if %s", p);
+
+	if (buf == end) {
+		pr_err("hist exceeds the max command length.\n");
+		return -E2BIG;
+	}
+
+	return 0;
+}
+
+static void __init
+trace_boot_init_histograms(struct trace_event_file *file,
+			   struct xbc_node *hnode, char *buf, size_t size)
+{
+	struct xbc_node *node;
+	const char *p;
+	char *tmp;
+
+	xbc_node_for_each_subkey(hnode, node) {
+		p = xbc_node_get_data(node);
+		if (!isdigit(p[0]))
+			continue;
+		/* All digit started node should be instances. */
+		if (trace_boot_compose_hist_cmd(node, buf, size) == 0) {
+			tmp = kstrdup(buf, GFP_KERNEL);
+			if (trigger_process_regex(file, buf) < 0)
+				pr_err("Failed to apply hist trigger: %s\n", tmp);
+			kfree(tmp);
+		}
+	}
+
+	if (xbc_node_find_subkey(hnode, "keys")) {
+		if (trace_boot_compose_hist_cmd(hnode, buf, size) == 0) {
+			tmp = kstrdup(buf, GFP_KERNEL);
+			if (trigger_process_regex(file, buf) < 0)
+				pr_err("Failed to apply hist trigger: %s\n", tmp);
+			kfree(tmp);
+		}
+	}
+}
+#else
+static void __init
+trace_boot_init_histograms(struct trace_event_file *file,
+			   struct xbc_node *hnode, char *buf, size_t size)
+{
+	/* do nothing */
+}
+#endif
+
 static void __init
 trace_boot_init_one_event(struct trace_array *tr, struct xbc_node *gnode,
 			  struct xbc_node *enode)
@@ -205,12 +488,18 @@ trace_boot_init_one_event(struct trace_array *tr, struct xbc_node *gnode,
 			pr_err("Failed to apply filter: %s\n", buf);
 	}
 
-	xbc_node_for_each_array_value(enode, "actions", anode, p) {
-		if (strlcpy(buf, p, ARRAY_SIZE(buf)) >= ARRAY_SIZE(buf))
-			pr_err("action string is too long: %s\n", p);
-		else if (trigger_process_regex(file, buf) < 0)
-			pr_err("Failed to apply an action: %s\n", buf);
-	}
+	if (IS_ENABLED(CONFIG_HIST_TRIGGERS)) {
+		xbc_node_for_each_array_value(enode, "actions", anode, p) {
+			if (strlcpy(buf, p, ARRAY_SIZE(buf)) >= ARRAY_SIZE(buf))
+				pr_err("action string is too long: %s\n", p);
+			else if (trigger_process_regex(file, buf) < 0)
+				pr_err("Failed to apply an action: %s\n", p);
+		}
+		anode = xbc_node_find_subkey(enode, "hist");
+		if (anode)
+			trace_boot_init_histograms(file, anode, buf, ARRAY_SIZE(buf));
+	} else if (xbc_node_find_value(enode, "actions", NULL))
+		pr_err("Failed to apply event actions because CONFIG_HIST_TRIGGERS is not set.\n");
 
 	if (xbc_node_find_value(enode, "enable", NULL)) {
 		if (trace_event_enable_disable(file, 1, 0) < 0)
@@ -228,18 +517,18 @@ trace_boot_init_events(struct trace_array *tr, struct xbc_node *node)
 	bool enable, enable_all = false;
 	const char *data;
 
-	node = xbc_node_find_child(node, "event");
+	node = xbc_node_find_subkey(node, "event");
 	if (!node)
 		return;
 	/* per-event key starts with "event.GROUP.EVENT" */
-	xbc_node_for_each_child(node, gnode) {
+	xbc_node_for_each_subkey(node, gnode) {
 		data = xbc_node_get_data(gnode);
 		if (!strcmp(data, "enable")) {
 			enable_all = true;
 			continue;
 		}
 		enable = false;
-		xbc_node_for_each_child(gnode, enode) {
+		xbc_node_for_each_subkey(gnode, enode) {
 			data = xbc_node_get_data(enode);
 			if (!strcmp(data, "enable")) {
 				enable = true;
@@ -331,11 +620,11 @@ trace_boot_init_instances(struct xbc_node *node)
 	struct trace_array *tr;
 	const char *p;
 
-	node = xbc_node_find_child(node, "instance");
+	node = xbc_node_find_subkey(node, "instance");
 	if (!node)
 		return;
 
-	xbc_node_for_each_child(node, inode) {
+	xbc_node_for_each_subkey(node, inode) {
 		p = xbc_node_get_data(inode);
 		if (!p || *p == '\0')
 			continue;
diff --git a/kernel/trace/trace_dynevent.c b/kernel/trace/trace_dynevent.c
index e57cc0870892..1110112e55bd 100644
--- a/kernel/trace/trace_dynevent.c
+++ b/kernel/trace/trace_dynevent.c
@@ -13,11 +13,49 @@
 #include <linux/tracefs.h>
 
 #include "trace.h"
+#include "trace_output.h"	/* for trace_event_sem */
 #include "trace_dynevent.h"
 
 static DEFINE_MUTEX(dyn_event_ops_mutex);
 static LIST_HEAD(dyn_event_ops_list);
 
+bool trace_event_dyn_try_get_ref(struct trace_event_call *dyn_call)
+{
+	struct trace_event_call *call;
+	bool ret = false;
+
+	if (WARN_ON_ONCE(!(dyn_call->flags & TRACE_EVENT_FL_DYNAMIC)))
+		return false;
+
+	down_read(&trace_event_sem);
+	list_for_each_entry(call, &ftrace_events, list) {
+		if (call == dyn_call) {
+			atomic_inc(&dyn_call->refcnt);
+			ret = true;
+		}
+	}
+	up_read(&trace_event_sem);
+	return ret;
+}
+
+void trace_event_dyn_put_ref(struct trace_event_call *call)
+{
+	if (WARN_ON_ONCE(!(call->flags & TRACE_EVENT_FL_DYNAMIC)))
+		return;
+
+	if (WARN_ON_ONCE(atomic_read(&call->refcnt) <= 0)) {
+		atomic_set(&call->refcnt, 0);
+		return;
+	}
+
+	atomic_dec(&call->refcnt);
+}
+
+bool trace_event_dyn_busy(struct trace_event_call *call)
+{
+	return atomic_read(&call->refcnt) != 0;
+}
+
 int dyn_event_register(struct dyn_event_operations *ops)
 {
 	if (!ops || !ops->create || !ops->show || !ops->is_busy ||
diff --git a/kernel/trace/trace_dynevent.h b/kernel/trace/trace_dynevent.h
index 7754936b57ee..936477a111d3 100644
--- a/kernel/trace/trace_dynevent.h
+++ b/kernel/trace/trace_dynevent.h
@@ -76,13 +76,15 @@ int dyn_event_init(struct dyn_event *ev, struct dyn_event_operations *ops)
 	return 0;
 }
 
-static inline int dyn_event_add(struct dyn_event *ev)
+static inline int dyn_event_add(struct dyn_event *ev,
+				struct trace_event_call *call)
 {
 	lockdep_assert_held(&event_mutex);
 
 	if (!ev || !ev->ops)
 		return -EINVAL;
 
+	call->flags |= TRACE_EVENT_FL_DYNAMIC;
 	list_add_tail(&ev->list, &dyn_event_list);
 	return 0;
 }
diff --git a/kernel/trace/trace_eprobe.c b/kernel/trace/trace_eprobe.c
new file mode 100644
index 000000000000..3044b762cbd7
--- /dev/null
+++ b/kernel/trace/trace_eprobe.c
@@ -0,0 +1,904 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * event probes
+ *
+ * Part of this code was copied from kernel/trace/trace_kprobe.c written by
+ * Masami Hiramatsu <mhiramat@kernel.org>
+ *
+ * Copyright (C) 2021, VMware Inc, Steven Rostedt <rostedt@goodmis.org>
+ * Copyright (C) 2021, VMware Inc, Tzvetomir Stoyanov tz.stoyanov@gmail.com>
+ *
+ */
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/ftrace.h>
+
+#include "trace_dynevent.h"
+#include "trace_probe.h"
+#include "trace_probe_tmpl.h"
+
+#define EPROBE_EVENT_SYSTEM "eprobes"
+
+struct trace_eprobe {
+	/* tracepoint system */
+	const char *event_system;
+
+	/* tracepoint event */
+	const char *event_name;
+
+	struct trace_event_call *event;
+
+	struct dyn_event	devent;
+	struct trace_probe	tp;
+};
+
+struct eprobe_data {
+	struct trace_event_file	*file;
+	struct trace_eprobe	*ep;
+};
+
+static int __trace_eprobe_create(int argc, const char *argv[]);
+
+static void trace_event_probe_cleanup(struct trace_eprobe *ep)
+{
+	if (!ep)
+		return;
+	trace_probe_cleanup(&ep->tp);
+	kfree(ep->event_name);
+	kfree(ep->event_system);
+	if (ep->event)
+		trace_event_put_ref(ep->event);
+	kfree(ep);
+}
+
+static struct trace_eprobe *to_trace_eprobe(struct dyn_event *ev)
+{
+	return container_of(ev, struct trace_eprobe, devent);
+}
+
+static int eprobe_dyn_event_create(const char *raw_command)
+{
+	return trace_probe_create(raw_command, __trace_eprobe_create);
+}
+
+static int eprobe_dyn_event_show(struct seq_file *m, struct dyn_event *ev)
+{
+	struct trace_eprobe *ep = to_trace_eprobe(ev);
+	int i;
+
+	seq_printf(m, "e:%s/%s", trace_probe_group_name(&ep->tp),
+				trace_probe_name(&ep->tp));
+	seq_printf(m, " %s.%s", ep->event_system, ep->event_name);
+
+	for (i = 0; i < ep->tp.nr_args; i++)
+		seq_printf(m, " %s=%s", ep->tp.args[i].name, ep->tp.args[i].comm);
+	seq_putc(m, '\n');
+
+	return 0;
+}
+
+static int unregister_trace_eprobe(struct trace_eprobe *ep)
+{
+	/* If other probes are on the event, just unregister eprobe */
+	if (trace_probe_has_sibling(&ep->tp))
+		goto unreg;
+
+	/* Enabled event can not be unregistered */
+	if (trace_probe_is_enabled(&ep->tp))
+		return -EBUSY;
+
+	/* Will fail if probe is being used by ftrace or perf */
+	if (trace_probe_unregister_event_call(&ep->tp))
+		return -EBUSY;
+
+unreg:
+	dyn_event_remove(&ep->devent);
+	trace_probe_unlink(&ep->tp);
+
+	return 0;
+}
+
+static int eprobe_dyn_event_release(struct dyn_event *ev)
+{
+	struct trace_eprobe *ep = to_trace_eprobe(ev);
+	int ret = unregister_trace_eprobe(ep);
+
+	if (!ret)
+		trace_event_probe_cleanup(ep);
+	return ret;
+}
+
+static bool eprobe_dyn_event_is_busy(struct dyn_event *ev)
+{
+	struct trace_eprobe *ep = to_trace_eprobe(ev);
+
+	return trace_probe_is_enabled(&ep->tp);
+}
+
+static bool eprobe_dyn_event_match(const char *system, const char *event,
+			int argc, const char **argv, struct dyn_event *ev)
+{
+	struct trace_eprobe *ep = to_trace_eprobe(ev);
+
+	return strcmp(trace_probe_name(&ep->tp), event) == 0 &&
+	    (!system || strcmp(trace_probe_group_name(&ep->tp), system) == 0) &&
+	    trace_probe_match_command_args(&ep->tp, argc, argv);
+}
+
+static struct dyn_event_operations eprobe_dyn_event_ops = {
+	.create = eprobe_dyn_event_create,
+	.show = eprobe_dyn_event_show,
+	.is_busy = eprobe_dyn_event_is_busy,
+	.free = eprobe_dyn_event_release,
+	.match = eprobe_dyn_event_match,
+};
+
+static struct trace_eprobe *alloc_event_probe(const char *group,
+					      const char *this_event,
+					      struct trace_event_call *event,
+					      int nargs)
+{
+	struct trace_eprobe *ep;
+	const char *event_name;
+	const char *sys_name;
+	int ret = -ENOMEM;
+
+	if (!event)
+		return ERR_PTR(-ENODEV);
+
+	sys_name = event->class->system;
+	event_name = trace_event_name(event);
+
+	ep = kzalloc(struct_size(ep, tp.args, nargs), GFP_KERNEL);
+	if (!ep) {
+		trace_event_put_ref(event);
+		goto error;
+	}
+	ep->event = event;
+	ep->event_name = kstrdup(event_name, GFP_KERNEL);
+	if (!ep->event_name)
+		goto error;
+	ep->event_system = kstrdup(sys_name, GFP_KERNEL);
+	if (!ep->event_system)
+		goto error;
+
+	ret = trace_probe_init(&ep->tp, this_event, group, false);
+	if (ret < 0)
+		goto error;
+
+	dyn_event_init(&ep->devent, &eprobe_dyn_event_ops);
+	return ep;
+error:
+	trace_event_probe_cleanup(ep);
+	return ERR_PTR(ret);
+}
+
+static int trace_eprobe_tp_arg_update(struct trace_eprobe *ep, int i)
+{
+	struct probe_arg *parg = &ep->tp.args[i];
+	struct ftrace_event_field *field;
+	struct list_head *head;
+
+	head = trace_get_fields(ep->event);
+	list_for_each_entry(field, head, link) {
+		if (!strcmp(parg->code->data, field->name)) {
+			kfree(parg->code->data);
+			parg->code->data = field;
+			return 0;
+		}
+	}
+	kfree(parg->code->data);
+	parg->code->data = NULL;
+	return -ENOENT;
+}
+
+static int eprobe_event_define_fields(struct trace_event_call *event_call)
+{
+	int ret;
+	struct eprobe_trace_entry_head field;
+	struct trace_probe *tp;
+
+	tp = trace_probe_primary_from_call(event_call);
+	if (WARN_ON_ONCE(!tp))
+		return -ENOENT;
+
+	DEFINE_FIELD(unsigned int, type, FIELD_STRING_TYPE, 0);
+
+	return traceprobe_define_arg_fields(event_call, sizeof(field), tp);
+}
+
+static struct trace_event_fields eprobe_fields_array[] = {
+	{ .type = TRACE_FUNCTION_TYPE,
+	  .define_fields = eprobe_event_define_fields },
+	{}
+};
+
+/* Event entry printers */
+static enum print_line_t
+print_eprobe_event(struct trace_iterator *iter, int flags,
+		   struct trace_event *event)
+{
+	struct eprobe_trace_entry_head *field;
+	struct trace_event_call *pevent;
+	struct trace_event *probed_event;
+	struct trace_seq *s = &iter->seq;
+	struct trace_probe *tp;
+
+	field = (struct eprobe_trace_entry_head *)iter->ent;
+	tp = trace_probe_primary_from_call(
+		container_of(event, struct trace_event_call, event));
+	if (WARN_ON_ONCE(!tp))
+		goto out;
+
+	trace_seq_printf(s, "%s: (", trace_probe_name(tp));
+
+	probed_event = ftrace_find_event(field->type);
+	if (probed_event) {
+		pevent = container_of(probed_event, struct trace_event_call, event);
+		trace_seq_printf(s, "%s.%s", pevent->class->system,
+				 trace_event_name(pevent));
+	} else {
+		trace_seq_printf(s, "%u", field->type);
+	}
+
+	trace_seq_putc(s, ')');
+
+	if (print_probe_args(s, tp->args, tp->nr_args,
+			     (u8 *)&field[1], field) < 0)
+		goto out;
+
+	trace_seq_putc(s, '\n');
+ out:
+	return trace_handle_return(s);
+}
+
+static unsigned long get_event_field(struct fetch_insn *code, void *rec)
+{
+	struct ftrace_event_field *field = code->data;
+	unsigned long val;
+	void *addr;
+
+	addr = rec + field->offset;
+
+	switch (field->size) {
+	case 1:
+		if (field->is_signed)
+			val = *(char *)addr;
+		else
+			val = *(unsigned char *)addr;
+		break;
+	case 2:
+		if (field->is_signed)
+			val = *(short *)addr;
+		else
+			val = *(unsigned short *)addr;
+		break;
+	case 4:
+		if (field->is_signed)
+			val = *(int *)addr;
+		else
+			val = *(unsigned int *)addr;
+		break;
+	default:
+		if (field->is_signed)
+			val = *(long *)addr;
+		else
+			val = *(unsigned long *)addr;
+		break;
+	}
+	return val;
+}
+
+static int get_eprobe_size(struct trace_probe *tp, void *rec)
+{
+	struct probe_arg *arg;
+	int i, len, ret = 0;
+
+	for (i = 0; i < tp->nr_args; i++) {
+		arg = tp->args + i;
+		if (unlikely(arg->dynamic)) {
+			unsigned long val;
+
+			val = get_event_field(arg->code, rec);
+			len = process_fetch_insn_bottom(arg->code + 1, val, NULL, NULL);
+			if (len > 0)
+				ret += len;
+		}
+	}
+
+	return ret;
+}
+
+/* Kprobe specific fetch functions */
+
+/* Note that we don't verify it, since the code does not come from user space */
+static int
+process_fetch_insn(struct fetch_insn *code, void *rec, void *dest,
+		   void *base)
+{
+	unsigned long val;
+
+	val = get_event_field(code, rec);
+	return process_fetch_insn_bottom(code + 1, val, dest, base);
+}
+NOKPROBE_SYMBOL(process_fetch_insn)
+
+/* Return the length of string -- including null terminal byte */
+static nokprobe_inline int
+fetch_store_strlen_user(unsigned long addr)
+{
+	const void __user *uaddr =  (__force const void __user *)addr;
+
+	return strnlen_user_nofault(uaddr, MAX_STRING_SIZE);
+}
+
+/* Return the length of string -- including null terminal byte */
+static nokprobe_inline int
+fetch_store_strlen(unsigned long addr)
+{
+	int ret, len = 0;
+	u8 c;
+
+#ifdef CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	if (addr < TASK_SIZE)
+		return fetch_store_strlen_user(addr);
+#endif
+
+	do {
+		ret = copy_from_kernel_nofault(&c, (u8 *)addr + len, 1);
+		len++;
+	} while (c && ret == 0 && len < MAX_STRING_SIZE);
+
+	return (ret < 0) ? ret : len;
+}
+
+/*
+ * Fetch a null-terminated string from user. Caller MUST set *(u32 *)buf
+ * with max length and relative data location.
+ */
+static nokprobe_inline int
+fetch_store_string_user(unsigned long addr, void *dest, void *base)
+{
+	const void __user *uaddr =  (__force const void __user *)addr;
+	int maxlen = get_loc_len(*(u32 *)dest);
+	void *__dest;
+	long ret;
+
+	if (unlikely(!maxlen))
+		return -ENOMEM;
+
+	__dest = get_loc_data(dest, base);
+
+	ret = strncpy_from_user_nofault(__dest, uaddr, maxlen);
+	if (ret >= 0)
+		*(u32 *)dest = make_data_loc(ret, __dest - base);
+
+	return ret;
+}
+
+/*
+ * Fetch a null-terminated string. Caller MUST set *(u32 *)buf with max
+ * length and relative data location.
+ */
+static nokprobe_inline int
+fetch_store_string(unsigned long addr, void *dest, void *base)
+{
+	int maxlen = get_loc_len(*(u32 *)dest);
+	void *__dest;
+	long ret;
+
+#ifdef CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	if ((unsigned long)addr < TASK_SIZE)
+		return fetch_store_string_user(addr, dest, base);
+#endif
+
+	if (unlikely(!maxlen))
+		return -ENOMEM;
+
+	__dest = get_loc_data(dest, base);
+
+	/*
+	 * Try to get string again, since the string can be changed while
+	 * probing.
+	 */
+	ret = strncpy_from_kernel_nofault(__dest, (void *)addr, maxlen);
+	if (ret >= 0)
+		*(u32 *)dest = make_data_loc(ret, __dest - base);
+
+	return ret;
+}
+
+static nokprobe_inline int
+probe_mem_read_user(void *dest, void *src, size_t size)
+{
+	const void __user *uaddr =  (__force const void __user *)src;
+
+	return copy_from_user_nofault(dest, uaddr, size);
+}
+
+static nokprobe_inline int
+probe_mem_read(void *dest, void *src, size_t size)
+{
+#ifdef CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
+	if ((unsigned long)src < TASK_SIZE)
+		return probe_mem_read_user(dest, src, size);
+#endif
+	return copy_from_kernel_nofault(dest, src, size);
+}
+
+/* eprobe handler */
+static inline void
+__eprobe_trace_func(struct eprobe_data *edata, void *rec)
+{
+	struct eprobe_trace_entry_head *entry;
+	struct trace_event_call *call = trace_probe_event_call(&edata->ep->tp);
+	struct trace_event_buffer fbuffer;
+	int dsize;
+
+	if (WARN_ON_ONCE(call != edata->file->event_call))
+		return;
+
+	if (trace_trigger_soft_disabled(edata->file))
+		return;
+
+	fbuffer.trace_ctx = tracing_gen_ctx();
+	fbuffer.trace_file = edata->file;
+
+	dsize = get_eprobe_size(&edata->ep->tp, rec);
+	fbuffer.regs = NULL;
+
+	fbuffer.event =
+		trace_event_buffer_lock_reserve(&fbuffer.buffer, edata->file,
+					call->event.type,
+					sizeof(*entry) + edata->ep->tp.size + dsize,
+					fbuffer.trace_ctx);
+	if (!fbuffer.event)
+		return;
+
+	entry = fbuffer.entry = ring_buffer_event_data(fbuffer.event);
+	if (edata->ep->event)
+		entry->type = edata->ep->event->event.type;
+	else
+		entry->type = 0;
+	store_trace_args(&entry[1], &edata->ep->tp, rec, sizeof(*entry), dsize);
+
+	trace_event_buffer_commit(&fbuffer);
+}
+
+/*
+ * The event probe implementation uses event triggers to get access to
+ * the event it is attached to, but is not an actual trigger. The below
+ * functions are just stubs to fulfill what is needed to use the trigger
+ * infrastructure.
+ */
+static int eprobe_trigger_init(struct event_trigger_ops *ops,
+			       struct event_trigger_data *data)
+{
+	return 0;
+}
+
+static void eprobe_trigger_free(struct event_trigger_ops *ops,
+				struct event_trigger_data *data)
+{
+
+}
+
+static int eprobe_trigger_print(struct seq_file *m,
+				struct event_trigger_ops *ops,
+				struct event_trigger_data *data)
+{
+	/* Do not print eprobe event triggers */
+	return 0;
+}
+
+static void eprobe_trigger_func(struct event_trigger_data *data,
+				struct trace_buffer *buffer, void *rec,
+				struct ring_buffer_event *rbe)
+{
+	struct eprobe_data *edata = data->private_data;
+
+	__eprobe_trace_func(edata, rec);
+}
+
+static struct event_trigger_ops eprobe_trigger_ops = {
+	.func			= eprobe_trigger_func,
+	.print			= eprobe_trigger_print,
+	.init			= eprobe_trigger_init,
+	.free			= eprobe_trigger_free,
+};
+
+static int eprobe_trigger_cmd_func(struct event_command *cmd_ops,
+				   struct trace_event_file *file,
+				   char *glob, char *cmd, char *param)
+{
+	return -1;
+}
+
+static int eprobe_trigger_reg_func(char *glob, struct event_trigger_ops *ops,
+				 struct event_trigger_data *data,
+				 struct trace_event_file *file)
+{
+	return -1;
+}
+
+static void eprobe_trigger_unreg_func(char *glob, struct event_trigger_ops *ops,
+				    struct event_trigger_data *data,
+				    struct trace_event_file *file)
+{
+
+}
+
+static struct event_trigger_ops *eprobe_trigger_get_ops(char *cmd,
+							char *param)
+{
+	return &eprobe_trigger_ops;
+}
+
+static struct event_command event_trigger_cmd = {
+	.name			= "eprobe",
+	.trigger_type		= ETT_EVENT_EPROBE,
+	.flags			= EVENT_CMD_FL_NEEDS_REC,
+	.func			= eprobe_trigger_cmd_func,
+	.reg			= eprobe_trigger_reg_func,
+	.unreg			= eprobe_trigger_unreg_func,
+	.unreg_all		= NULL,
+	.get_trigger_ops	= eprobe_trigger_get_ops,
+	.set_filter		= NULL,
+};
+
+static struct event_trigger_data *
+new_eprobe_trigger(struct trace_eprobe *ep, struct trace_event_file *file)
+{
+	struct event_trigger_data *trigger;
+	struct eprobe_data *edata;
+
+	edata = kzalloc(sizeof(*edata), GFP_KERNEL);
+	trigger = kzalloc(sizeof(*trigger), GFP_KERNEL);
+	if (!trigger || !edata) {
+		kfree(edata);
+		kfree(trigger);
+		return ERR_PTR(-ENOMEM);
+	}
+
+	trigger->flags = EVENT_TRIGGER_FL_PROBE;
+	trigger->count = -1;
+	trigger->ops = &eprobe_trigger_ops;
+
+	/*
+	 * EVENT PROBE triggers are not registered as commands with
+	 * register_event_command(), as they are not controlled by the user
+	 * from the trigger file
+	 */
+	trigger->cmd_ops = &event_trigger_cmd;
+
+	INIT_LIST_HEAD(&trigger->list);
+	RCU_INIT_POINTER(trigger->filter, NULL);
+
+	edata->file = file;
+	edata->ep = ep;
+	trigger->private_data = edata;
+
+	return trigger;
+}
+
+static int enable_eprobe(struct trace_eprobe *ep,
+			 struct trace_event_file *eprobe_file)
+{
+	struct event_trigger_data *trigger;
+	struct trace_event_file *file;
+	struct trace_array *tr = eprobe_file->tr;
+
+	file = find_event_file(tr, ep->event_system, ep->event_name);
+	if (!file)
+		return -ENOENT;
+	trigger = new_eprobe_trigger(ep, eprobe_file);
+	if (IS_ERR(trigger))
+		return PTR_ERR(trigger);
+
+	list_add_tail_rcu(&trigger->list, &file->triggers);
+
+	trace_event_trigger_enable_disable(file, 1);
+	update_cond_flag(file);
+
+	return 0;
+}
+
+static struct trace_event_functions eprobe_funcs = {
+	.trace		= print_eprobe_event
+};
+
+static int disable_eprobe(struct trace_eprobe *ep,
+			  struct trace_array *tr)
+{
+	struct event_trigger_data *trigger;
+	struct trace_event_file *file;
+	struct eprobe_data *edata;
+
+	file = find_event_file(tr, ep->event_system, ep->event_name);
+	if (!file)
+		return -ENOENT;
+
+	list_for_each_entry(trigger, &file->triggers, list) {
+		if (!(trigger->flags & EVENT_TRIGGER_FL_PROBE))
+			continue;
+		edata = trigger->private_data;
+		if (edata->ep == ep)
+			break;
+	}
+	if (list_entry_is_head(trigger, &file->triggers, list))
+		return -ENODEV;
+
+	list_del_rcu(&trigger->list);
+
+	trace_event_trigger_enable_disable(file, 0);
+	update_cond_flag(file);
+	return 0;
+}
+
+static int enable_trace_eprobe(struct trace_event_call *call,
+			       struct trace_event_file *file)
+{
+	struct trace_probe *pos, *tp;
+	struct trace_eprobe *ep;
+	bool enabled;
+	int ret = 0;
+
+	tp = trace_probe_primary_from_call(call);
+	if (WARN_ON_ONCE(!tp))
+		return -ENODEV;
+	enabled = trace_probe_is_enabled(tp);
+
+	/* This also changes "enabled" state */
+	if (file) {
+		ret = trace_probe_add_file(tp, file);
+		if (ret)
+			return ret;
+	} else
+		trace_probe_set_flag(tp, TP_FLAG_PROFILE);
+
+	if (enabled)
+		return 0;
+
+	list_for_each_entry(pos, trace_probe_probe_list(tp), list) {
+		ep = container_of(pos, struct trace_eprobe, tp);
+		ret = enable_eprobe(ep, file);
+		if (ret)
+			break;
+		enabled = true;
+	}
+
+	if (ret) {
+		/* Failed to enable one of them. Roll back all */
+		if (enabled)
+			disable_eprobe(ep, file->tr);
+		if (file)
+			trace_probe_remove_file(tp, file);
+		else
+			trace_probe_clear_flag(tp, TP_FLAG_PROFILE);
+	}
+
+	return ret;
+}
+
+static int disable_trace_eprobe(struct trace_event_call *call,
+				struct trace_event_file *file)
+{
+	struct trace_probe *pos, *tp;
+	struct trace_eprobe *ep;
+
+	tp = trace_probe_primary_from_call(call);
+	if (WARN_ON_ONCE(!tp))
+		return -ENODEV;
+
+	if (file) {
+		if (!trace_probe_get_file_link(tp, file))
+			return -ENOENT;
+		if (!trace_probe_has_single_file(tp))
+			goto out;
+		trace_probe_clear_flag(tp, TP_FLAG_TRACE);
+	} else
+		trace_probe_clear_flag(tp, TP_FLAG_PROFILE);
+
+	if (!trace_probe_is_enabled(tp)) {
+		list_for_each_entry(pos, trace_probe_probe_list(tp), list) {
+			ep = container_of(pos, struct trace_eprobe, tp);
+			disable_eprobe(ep, file->tr);
+		}
+	}
+
+ out:
+	if (file)
+		/*
+		 * Synchronization is done in below function. For perf event,
+		 * file == NULL and perf_trace_event_unreg() calls
+		 * tracepoint_synchronize_unregister() to ensure synchronize
+		 * event. We don't need to care about it.
+		 */
+		trace_probe_remove_file(tp, file);
+
+	return 0;
+}
+
+static int eprobe_register(struct trace_event_call *event,
+			   enum trace_reg type, void *data)
+{
+	struct trace_event_file *file = data;
+
+	switch (type) {
+	case TRACE_REG_REGISTER:
+		return enable_trace_eprobe(event, file);
+	case TRACE_REG_UNREGISTER:
+		return disable_trace_eprobe(event, file);
+#ifdef CONFIG_PERF_EVENTS
+	case TRACE_REG_PERF_REGISTER:
+	case TRACE_REG_PERF_UNREGISTER:
+	case TRACE_REG_PERF_OPEN:
+	case TRACE_REG_PERF_CLOSE:
+	case TRACE_REG_PERF_ADD:
+	case TRACE_REG_PERF_DEL:
+		return 0;
+#endif
+	}
+	return 0;
+}
+
+static inline void init_trace_eprobe_call(struct trace_eprobe *ep)
+{
+	struct trace_event_call *call = trace_probe_event_call(&ep->tp);
+
+	call->flags = TRACE_EVENT_FL_EPROBE;
+	call->event.funcs = &eprobe_funcs;
+	call->class->fields_array = eprobe_fields_array;
+	call->class->reg = eprobe_register;
+}
+
+static struct trace_event_call *
+find_and_get_event(const char *system, const char *event_name)
+{
+	struct trace_event_call *tp_event;
+	const char *name;
+
+	list_for_each_entry(tp_event, &ftrace_events, list) {
+		/* Skip other probes and ftrace events */
+		if (tp_event->flags &
+		    (TRACE_EVENT_FL_IGNORE_ENABLE |
+		     TRACE_EVENT_FL_KPROBE |
+		     TRACE_EVENT_FL_UPROBE |
+		     TRACE_EVENT_FL_EPROBE))
+			continue;
+		if (!tp_event->class->system ||
+		    strcmp(system, tp_event->class->system))
+			continue;
+		name = trace_event_name(tp_event);
+		if (!name || strcmp(event_name, name))
+			continue;
+		if (!trace_event_try_get_ref(tp_event)) {
+			return NULL;
+			break;
+		}
+		return tp_event;
+		break;
+	}
+	return NULL;
+}
+
+static int trace_eprobe_tp_update_arg(struct trace_eprobe *ep, const char *argv[], int i)
+{
+	unsigned int flags = TPARG_FL_KERNEL | TPARG_FL_TPOINT;
+	int ret;
+
+	ret = traceprobe_parse_probe_arg(&ep->tp, i, argv[i], flags);
+	if (ret)
+		return ret;
+
+	if (ep->tp.args[i].code->op == FETCH_OP_TP_ARG)
+		ret = trace_eprobe_tp_arg_update(ep, i);
+
+	return ret;
+}
+
+static int __trace_eprobe_create(int argc, const char *argv[])
+{
+	/*
+	 * Argument syntax:
+	 *      e[:[GRP/]ENAME] SYSTEM.EVENT [FETCHARGS]
+	 * Fetch args:
+	 *  <name>=$<field>[:TYPE]
+	 */
+	const char *event = NULL, *group = EPROBE_EVENT_SYSTEM;
+	const char *sys_event = NULL, *sys_name = NULL;
+	struct trace_event_call *event_call;
+	struct trace_eprobe *ep = NULL;
+	char buf1[MAX_EVENT_NAME_LEN];
+	char buf2[MAX_EVENT_NAME_LEN];
+	int ret = 0;
+	int i;
+
+	if (argc < 2 || argv[0][0] != 'e')
+		return -ECANCELED;
+
+	trace_probe_log_init("event_probe", argc, argv);
+
+	event = strchr(&argv[0][1], ':');
+	if (event) {
+		event++;
+		ret = traceprobe_parse_event_name(&event, &group, buf1,
+						  event - argv[0]);
+		if (ret)
+			goto parse_error;
+	} else {
+		strscpy(buf1, argv[1], MAX_EVENT_NAME_LEN);
+		sanitize_event_name(buf1);
+		event = buf1;
+	}
+	if (!is_good_name(event) || !is_good_name(group))
+		goto parse_error;
+
+	sys_event = argv[1];
+	ret = traceprobe_parse_event_name(&sys_event, &sys_name, buf2,
+					  sys_event - argv[1]);
+	if (ret || !sys_name)
+		goto parse_error;
+	if (!is_good_name(sys_event) || !is_good_name(sys_name))
+		goto parse_error;
+
+	mutex_lock(&event_mutex);
+	event_call = find_and_get_event(sys_name, sys_event);
+	ep = alloc_event_probe(group, event, event_call, argc - 2);
+	mutex_unlock(&event_mutex);
+
+	if (IS_ERR(ep)) {
+		ret = PTR_ERR(ep);
+		/* This must return -ENOMEM, else there is a bug */
+		WARN_ON_ONCE(ret != -ENOMEM);
+		ep = NULL;
+		goto error;
+	}
+
+	argc -= 2; argv += 2;
+	/* parse arguments */
+	for (i = 0; i < argc && i < MAX_TRACE_ARGS; i++) {
+		trace_probe_log_set_index(i + 2);
+		ret = trace_eprobe_tp_update_arg(ep, argv, i);
+		if (ret)
+			goto error;
+	}
+	ret = traceprobe_set_print_fmt(&ep->tp, PROBE_PRINT_EVENT);
+	if (ret < 0)
+		goto error;
+	init_trace_eprobe_call(ep);
+	mutex_lock(&event_mutex);
+	ret = trace_probe_register_event_call(&ep->tp);
+	if (ret) {
+		if (ret == -EEXIST) {
+			trace_probe_log_set_index(0);
+			trace_probe_log_err(0, EVENT_EXIST);
+		}
+		mutex_unlock(&event_mutex);
+		goto error;
+	}
+	ret = dyn_event_add(&ep->devent, &ep->tp.event->call);
+	mutex_unlock(&event_mutex);
+	return ret;
+parse_error:
+	ret = -EINVAL;
+error:
+	trace_event_probe_cleanup(ep);
+	return ret;
+}
+
+/*
+ * Register dynevent at core_initcall. This allows kernel to setup eprobe
+ * events in postcore_initcall without tracefs.
+ */
+static __init int trace_events_eprobe_init_early(void)
+{
+	int err = 0;
+
+	err = dyn_event_register(&eprobe_dyn_event_ops);
+	if (err)
+		pr_warn("Could not register eprobe_dyn_event_ops\n");
+
+	return err;
+}
+core_initcall(trace_events_eprobe_init_early);
diff --git a/kernel/trace/trace_event_perf.c b/kernel/trace/trace_event_perf.c
index 03be4435d103..6aed10e2f7ce 100644
--- a/kernel/trace/trace_event_perf.c
+++ b/kernel/trace/trace_event_perf.c
@@ -177,7 +177,7 @@ static void perf_trace_event_unreg(struct perf_event *p_event)
 		}
 	}
 out:
-	module_put(tp_event->mod);
+	trace_event_put_ref(tp_event);
 }
 
 static int perf_trace_event_open(struct perf_event *p_event)
@@ -224,10 +224,10 @@ int perf_trace_init(struct perf_event *p_event)
 	list_for_each_entry(tp_event, &ftrace_events, list) {
 		if (tp_event->event.type == event_id &&
 		    tp_event->class && tp_event->class->reg &&
-		    try_module_get(tp_event->mod)) {
+		    trace_event_try_get_ref(tp_event)) {
 			ret = perf_trace_event_init(tp_event, p_event);
 			if (ret)
-				module_put(tp_event->mod);
+				trace_event_put_ref(tp_event);
 			break;
 		}
 	}
diff --git a/kernel/trace/trace_events.c b/kernel/trace/trace_events.c
index 80e96989770e..830b3b9940f4 100644
--- a/kernel/trace/trace_events.c
+++ b/kernel/trace/trace_events.c
@@ -181,6 +181,7 @@ static int trace_define_common_fields(void)
 
 	__common_field(unsigned short, type);
 	__common_field(unsigned char, flags);
+	/* Holds both preempt_count and migrate_disable */
 	__common_field(unsigned char, preempt_count);
 	__common_field(int, pid);
 
@@ -2525,7 +2526,10 @@ __register_event(struct trace_event_call *call, struct module *mod)
 		return ret;
 
 	list_add(&call->list, &ftrace_events);
-	call->mod = mod;
+	if (call->flags & TRACE_EVENT_FL_DYNAMIC)
+		atomic_set(&call->refcnt, 0);
+	else
+		call->module = mod;
 
 	return 0;
 }
@@ -2839,7 +2843,9 @@ static void trace_module_remove_events(struct module *mod)
 
 	down_write(&trace_event_sem);
 	list_for_each_entry_safe(call, p, &ftrace_events, list) {
-		if (call->mod == mod)
+		if ((call->flags & TRACE_EVENT_FL_DYNAMIC) || !call->module)
+			continue;
+		if (call->module == mod)
 			__trace_remove_event_call(call);
 	}
 	up_write(&trace_event_sem);
@@ -2982,7 +2988,7 @@ struct trace_event_file *trace_get_event_file(const char *instance,
 	}
 
 	/* Don't let event modules unload while in use */
-	ret = try_module_get(file->event_call->mod);
+	ret = trace_event_try_get_ref(file->event_call);
 	if (!ret) {
 		trace_array_put(tr);
 		ret = -EBUSY;
@@ -3012,7 +3018,7 @@ EXPORT_SYMBOL_GPL(trace_get_event_file);
 void trace_put_event_file(struct trace_event_file *file)
 {
 	mutex_lock(&event_mutex);
-	module_put(file->event_call->mod);
+	trace_event_put_ref(file->event_call);
 	mutex_unlock(&event_mutex);
 
 	trace_array_put(file->tr);
@@ -3147,7 +3153,7 @@ static int free_probe_data(void *data)
 	if (!edata->ref) {
 		/* Remove the SOFT_MODE flag */
 		__ftrace_event_enable_disable(edata->file, 0, 1);
-		module_put(edata->file->event_call->mod);
+		trace_event_put_ref(edata->file->event_call);
 		kfree(edata);
 	}
 	return 0;
@@ -3280,7 +3286,7 @@ event_enable_func(struct trace_array *tr, struct ftrace_hash *hash,
 
  out_reg:
 	/* Don't let event modules unload while probe registered */
-	ret = try_module_get(file->event_call->mod);
+	ret = trace_event_try_get_ref(file->event_call);
 	if (!ret) {
 		ret = -EBUSY;
 		goto out_free;
@@ -3310,7 +3316,7 @@ event_enable_func(struct trace_array *tr, struct ftrace_hash *hash,
  out_disable:
 	__ftrace_event_enable_disable(file, 0, 1);
  out_put:
-	module_put(file->event_call->mod);
+	trace_event_put_ref(file->event_call);
  out_free:
 	kfree(data);
 	goto out;
@@ -3376,7 +3382,8 @@ void __trace_early_add_events(struct trace_array *tr)
 
 	list_for_each_entry(call, &ftrace_events, list) {
 		/* Early boot up should not have any modules loaded */
-		if (WARN_ON_ONCE(call->mod))
+		if (!(call->flags & TRACE_EVENT_FL_DYNAMIC) &&
+		    WARN_ON_ONCE(call->module))
 			continue;
 
 		ret = __trace_early_add_new_event(call, tr);
diff --git a/kernel/trace/trace_events_hist.c b/kernel/trace/trace_events_hist.c
index a48aa2a2875b..a6061a69aa84 100644
--- a/kernel/trace/trace_events_hist.c
+++ b/kernel/trace/trace_events_hist.c
@@ -121,6 +121,7 @@ struct hist_field {
 	unsigned int			size;
 	unsigned int			offset;
 	unsigned int                    is_signed;
+	unsigned long			buckets;
 	const char			*type;
 	struct hist_field		*operands[HIST_FIELD_OPERANDS_MAX];
 	struct hist_trigger_data	*hist_data;
@@ -219,6 +220,27 @@ static u64 hist_field_log2(struct hist_field *hist_field,
 	return (u64) ilog2(roundup_pow_of_two(val));
 }
 
+static u64 hist_field_bucket(struct hist_field *hist_field,
+			     struct tracing_map_elt *elt,
+			     struct trace_buffer *buffer,
+			     struct ring_buffer_event *rbe,
+			     void *event)
+{
+	struct hist_field *operand = hist_field->operands[0];
+	unsigned long buckets = hist_field->buckets;
+
+	u64 val = operand->fn(operand, elt, buffer, rbe, event);
+
+	if (WARN_ON_ONCE(!buckets))
+		return val;
+
+	if (val >= LONG_MAX)
+		val = div64_ul(val, buckets);
+	else
+		val = (u64)((unsigned long)val / buckets);
+	return val * buckets;
+}
+
 static u64 hist_field_plus(struct hist_field *hist_field,
 			   struct tracing_map_elt *elt,
 			   struct trace_buffer *buffer,
@@ -318,6 +340,7 @@ enum hist_field_flags {
 	HIST_FIELD_FL_VAR_REF		= 1 << 14,
 	HIST_FIELD_FL_CPU		= 1 << 15,
 	HIST_FIELD_FL_ALIAS		= 1 << 16,
+	HIST_FIELD_FL_BUCKET		= 1 << 17,
 };
 
 struct var_defs {
@@ -485,7 +508,8 @@ struct track_data {
 struct hist_elt_data {
 	char *comm;
 	u64 *var_ref_vals;
-	char *field_var_str[SYNTH_FIELDS_MAX];
+	char **field_var_str;
+	int n_field_var_str;
 };
 
 struct snapshot_context {
@@ -1109,7 +1133,8 @@ static const char *hist_field_name(struct hist_field *field,
 	if (field->field)
 		field_name = field->field->name;
 	else if (field->flags & HIST_FIELD_FL_LOG2 ||
-		 field->flags & HIST_FIELD_FL_ALIAS)
+		 field->flags & HIST_FIELD_FL_ALIAS ||
+		 field->flags & HIST_FIELD_FL_BUCKET)
 		field_name = hist_field_name(field->operands[0], ++level);
 	else if (field->flags & HIST_FIELD_FL_CPU)
 		field_name = "common_cpu";
@@ -1377,9 +1402,11 @@ static void hist_elt_data_free(struct hist_elt_data *elt_data)
 {
 	unsigned int i;
 
-	for (i = 0; i < SYNTH_FIELDS_MAX; i++)
+	for (i = 0; i < elt_data->n_field_var_str; i++)
 		kfree(elt_data->field_var_str[i]);
 
+	kfree(elt_data->field_var_str);
+
 	kfree(elt_data->comm);
 	kfree(elt_data);
 }
@@ -1396,17 +1423,17 @@ static int hist_trigger_elt_data_alloc(struct tracing_map_elt *elt)
 	struct hist_trigger_data *hist_data = elt->map->private_data;
 	unsigned int size = TASK_COMM_LEN;
 	struct hist_elt_data *elt_data;
-	struct hist_field *key_field;
+	struct hist_field *hist_field;
 	unsigned int i, n_str;
 
 	elt_data = kzalloc(sizeof(*elt_data), GFP_KERNEL);
 	if (!elt_data)
 		return -ENOMEM;
 
-	for_each_hist_key_field(i, hist_data) {
-		key_field = hist_data->fields[i];
+	for_each_hist_field(i, hist_data) {
+		hist_field = hist_data->fields[i];
 
-		if (key_field->flags & HIST_FIELD_FL_EXECNAME) {
+		if (hist_field->flags & HIST_FIELD_FL_EXECNAME) {
 			elt_data->comm = kzalloc(size, GFP_KERNEL);
 			if (!elt_data->comm) {
 				kfree(elt_data);
@@ -1427,6 +1454,13 @@ static int hist_trigger_elt_data_alloc(struct tracing_map_elt *elt)
 
 	size = STR_VAR_LEN_MAX;
 
+	elt_data->field_var_str = kcalloc(n_str, sizeof(char *), GFP_KERNEL);
+	if (!elt_data->field_var_str) {
+		hist_elt_data_free(elt_data);
+		return -EINVAL;
+	}
+	elt_data->n_field_var_str = n_str;
+
 	for (i = 0; i < n_str; i++) {
 		elt_data->field_var_str[i] = kzalloc(size, GFP_KERNEL);
 		if (!elt_data->field_var_str[i]) {
@@ -1470,6 +1504,8 @@ static const char *get_hist_field_flags(struct hist_field *hist_field)
 		flags_str = "syscall";
 	else if (hist_field->flags & HIST_FIELD_FL_LOG2)
 		flags_str = "log2";
+	else if (hist_field->flags & HIST_FIELD_FL_BUCKET)
+		flags_str = "buckets";
 	else if (hist_field->flags & HIST_FIELD_FL_TIMESTAMP_USECS)
 		flags_str = "usecs";
 
@@ -1590,7 +1626,9 @@ static void __destroy_hist_field(struct hist_field *hist_field)
 
 	kfree(hist_field->var.name);
 	kfree(hist_field->name);
-	kfree(hist_field->type);
+
+	/* Can likely be a const */
+	kfree_const(hist_field->type);
 
 	kfree(hist_field->system);
 	kfree(hist_field->event_name);
@@ -1647,9 +1685,7 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 	if (flags & HIST_FIELD_FL_HITCOUNT) {
 		hist_field->fn = hist_field_counter;
 		hist_field->size = sizeof(u64);
-		hist_field->type = kstrdup("u64", GFP_KERNEL);
-		if (!hist_field->type)
-			goto free;
+		hist_field->type = "u64";
 		goto out;
 	}
 
@@ -1658,12 +1694,13 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 		goto out;
 	}
 
-	if (flags & HIST_FIELD_FL_LOG2) {
-		unsigned long fl = flags & ~HIST_FIELD_FL_LOG2;
-		hist_field->fn = hist_field_log2;
+	if (flags & (HIST_FIELD_FL_LOG2 | HIST_FIELD_FL_BUCKET)) {
+		unsigned long fl = flags & ~(HIST_FIELD_FL_LOG2 | HIST_FIELD_FL_BUCKET);
+		hist_field->fn = flags & HIST_FIELD_FL_LOG2 ? hist_field_log2 :
+			hist_field_bucket;
 		hist_field->operands[0] = create_hist_field(hist_data, field, fl, NULL);
 		hist_field->size = hist_field->operands[0]->size;
-		hist_field->type = kstrdup(hist_field->operands[0]->type, GFP_KERNEL);
+		hist_field->type = kstrdup_const(hist_field->operands[0]->type, GFP_KERNEL);
 		if (!hist_field->type)
 			goto free;
 		goto out;
@@ -1672,18 +1709,14 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 	if (flags & HIST_FIELD_FL_TIMESTAMP) {
 		hist_field->fn = hist_field_timestamp;
 		hist_field->size = sizeof(u64);
-		hist_field->type = kstrdup("u64", GFP_KERNEL);
-		if (!hist_field->type)
-			goto free;
+		hist_field->type = "u64";
 		goto out;
 	}
 
 	if (flags & HIST_FIELD_FL_CPU) {
 		hist_field->fn = hist_field_cpu;
 		hist_field->size = sizeof(int);
-		hist_field->type = kstrdup("unsigned int", GFP_KERNEL);
-		if (!hist_field->type)
-			goto free;
+		hist_field->type = "unsigned int";
 		goto out;
 	}
 
@@ -1696,7 +1729,7 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 		flags |= HIST_FIELD_FL_STRING;
 
 		hist_field->size = MAX_FILTER_STR_VAL;
-		hist_field->type = kstrdup(field->type, GFP_KERNEL);
+		hist_field->type = kstrdup_const(field->type, GFP_KERNEL);
 		if (!hist_field->type)
 			goto free;
 
@@ -1709,7 +1742,7 @@ static struct hist_field *create_hist_field(struct hist_trigger_data *hist_data,
 	} else {
 		hist_field->size = field->size;
 		hist_field->is_signed = field->is_signed;
-		hist_field->type = kstrdup(field->type, GFP_KERNEL);
+		hist_field->type = kstrdup_const(field->type, GFP_KERNEL);
 		if (!hist_field->type)
 			goto free;
 
@@ -1795,7 +1828,7 @@ static int init_var_ref(struct hist_field *ref_field,
 		}
 	}
 
-	ref_field->type = kstrdup(var_field->type, GFP_KERNEL);
+	ref_field->type = kstrdup_const(var_field->type, GFP_KERNEL);
 	if (!ref_field->type) {
 		err = -ENOMEM;
 		goto free;
@@ -1953,7 +1986,7 @@ static struct hist_field *parse_var_ref(struct hist_trigger_data *hist_data,
 
 static struct ftrace_event_field *
 parse_field(struct hist_trigger_data *hist_data, struct trace_event_file *file,
-	    char *field_str, unsigned long *flags)
+	    char *field_str, unsigned long *flags, unsigned long *buckets)
 {
 	struct ftrace_event_field *field = NULL;
 	char *field_name, *modifier, *str;
@@ -1980,7 +2013,22 @@ parse_field(struct hist_trigger_data *hist_data, struct trace_event_file *file,
 			*flags |= HIST_FIELD_FL_LOG2;
 		else if (strcmp(modifier, "usecs") == 0)
 			*flags |= HIST_FIELD_FL_TIMESTAMP_USECS;
-		else {
+		else if (strncmp(modifier, "bucket", 6) == 0) {
+			int ret;
+
+			modifier += 6;
+
+			if (*modifier == 's')
+				modifier++;
+			if (*modifier != '=')
+				goto error;
+			modifier++;
+			ret = kstrtoul(modifier, 0, buckets);
+			if (ret || !(*buckets))
+				goto error;
+			*flags |= HIST_FIELD_FL_BUCKET;
+		} else {
+ error:
 			hist_err(tr, HIST_ERR_BAD_FIELD_MODIFIER, errpos(modifier));
 			field = ERR_PTR(-EINVAL);
 			goto out;
@@ -2049,6 +2097,7 @@ static struct hist_field *parse_atom(struct hist_trigger_data *hist_data,
 	char *s, *ref_system = NULL, *ref_event = NULL, *ref_var = str;
 	struct ftrace_event_field *field = NULL;
 	struct hist_field *hist_field = NULL;
+	unsigned long buckets = 0;
 	int ret = 0;
 
 	s = strchr(str, '.');
@@ -2086,7 +2135,7 @@ static struct hist_field *parse_atom(struct hist_trigger_data *hist_data,
 	} else
 		str = s;
 
-	field = parse_field(hist_data, file, str, flags);
+	field = parse_field(hist_data, file, str, flags, &buckets);
 	if (IS_ERR(field)) {
 		ret = PTR_ERR(field);
 		goto out;
@@ -2097,6 +2146,7 @@ static struct hist_field *parse_atom(struct hist_trigger_data *hist_data,
 		ret = -ENOMEM;
 		goto out;
 	}
+	hist_field->buckets = buckets;
 
 	return hist_field;
  out:
@@ -2171,7 +2221,7 @@ static struct hist_field *parse_unary(struct hist_trigger_data *hist_data,
 	expr->operands[0] = operand1;
 	expr->operator = FIELD_OP_UNARY_MINUS;
 	expr->name = expr_str(expr, 0);
-	expr->type = kstrdup(operand1->type, GFP_KERNEL);
+	expr->type = kstrdup_const(operand1->type, GFP_KERNEL);
 	if (!expr->type) {
 		ret = -ENOMEM;
 		goto free;
@@ -2311,7 +2361,7 @@ static struct hist_field *parse_expr(struct hist_trigger_data *hist_data,
 
 	expr->operator = field_op;
 	expr->name = expr_str(expr, 0);
-	expr->type = kstrdup(operand1->type, GFP_KERNEL);
+	expr->type = kstrdup_const(operand1->type, GFP_KERNEL);
 	if (!expr->type) {
 		ret = -ENOMEM;
 		goto free;
@@ -2699,10 +2749,10 @@ static struct hist_field *create_var(struct hist_trigger_data *hist_data,
 	var->var.hist_data = var->hist_data = hist_data;
 	var->size = size;
 	var->var.name = kstrdup(name, GFP_KERNEL);
-	var->type = kstrdup(type, GFP_KERNEL);
+	var->type = kstrdup_const(type, GFP_KERNEL);
 	if (!var->var.name || !var->type) {
+		kfree_const(var->type);
 		kfree(var->var.name);
-		kfree(var->type);
 		kfree(var);
 		var = ERR_PTR(-ENOMEM);
 	}
@@ -3731,6 +3781,41 @@ static int create_val_field(struct hist_trigger_data *hist_data,
 	return __create_val_field(hist_data, val_idx, file, NULL, field_str, 0);
 }
 
+static const char *no_comm = "(no comm)";
+
+static u64 hist_field_execname(struct hist_field *hist_field,
+			       struct tracing_map_elt *elt,
+			       struct trace_buffer *buffer,
+			       struct ring_buffer_event *rbe,
+			       void *event)
+{
+	struct hist_elt_data *elt_data;
+
+	if (WARN_ON_ONCE(!elt))
+		return (u64)(unsigned long)no_comm;
+
+	elt_data = elt->private_data;
+
+	if (WARN_ON_ONCE(!elt_data->comm))
+		return (u64)(unsigned long)no_comm;
+
+	return (u64)(unsigned long)(elt_data->comm);
+}
+
+/* Convert a var that points to common_pid.execname to a string */
+static void update_var_execname(struct hist_field *hist_field)
+{
+	hist_field->flags = HIST_FIELD_FL_STRING | HIST_FIELD_FL_VAR |
+		HIST_FIELD_FL_EXECNAME;
+	hist_field->size = MAX_FILTER_STR_VAL;
+	hist_field->is_signed = 0;
+
+	kfree_const(hist_field->type);
+	hist_field->type = "char[]";
+
+	hist_field->fn = hist_field_execname;
+}
+
 static int create_var_field(struct hist_trigger_data *hist_data,
 			    unsigned int val_idx,
 			    struct trace_event_file *file,
@@ -3755,6 +3840,9 @@ static int create_var_field(struct hist_trigger_data *hist_data,
 
 	ret = __create_val_field(hist_data, val_idx, file, var_name, expr_str, flags);
 
+	if (!ret && hist_data->fields[val_idx]->flags & HIST_FIELD_FL_EXECNAME)
+		update_var_execname(hist_data->fields[val_idx]);
+
 	if (!ret && hist_data->fields[val_idx]->flags & HIST_FIELD_FL_STRING)
 		hist_data->fields[val_idx]->var_str_idx = hist_data->n_var_str++;
 
@@ -4698,6 +4786,11 @@ static void hist_trigger_print_key(struct seq_file *m,
 		} else if (key_field->flags & HIST_FIELD_FL_LOG2) {
 			seq_printf(m, "%s: ~ 2^%-2llu", field_name,
 				   *(u64 *)(key + key_field->offset));
+		} else if (key_field->flags & HIST_FIELD_FL_BUCKET) {
+			unsigned long buckets = key_field->buckets;
+			uval = *(u64 *)(key + key_field->offset);
+			seq_printf(m, "%s: ~ %llu-%llu", field_name,
+				   uval, uval + buckets -1);
 		} else if (key_field->flags & HIST_FIELD_FL_STRING) {
 			seq_printf(m, "%s: %-50s", field_name,
 				   (char *)(key + key_field->offset));
@@ -5137,6 +5230,8 @@ static void hist_field_print(struct seq_file *m, struct hist_field *hist_field)
 				seq_printf(m, ".%s", flags);
 		}
 	}
+	if (hist_field->buckets)
+		seq_printf(m, "=%ld", hist_field->buckets);
 }
 
 static int event_hist_trigger_print(struct seq_file *m,
diff --git a/kernel/trace/trace_events_synth.c b/kernel/trace/trace_events_synth.c
index 9315fc03e303..d54094b7a9d7 100644
--- a/kernel/trace/trace_events_synth.c
+++ b/kernel/trace/trace_events_synth.c
@@ -1298,7 +1298,7 @@ static int __create_synth_event(const char *name, const char *raw_fields)
 	}
 	ret = register_synth_event(event);
 	if (!ret)
-		dyn_event_add(&event->devent);
+		dyn_event_add(&event->devent, &event->call);
 	else
 		free_synth_event(event);
  out:
@@ -1369,13 +1369,15 @@ static int destroy_synth_event(struct synth_event *se)
 	int ret;
 
 	if (se->ref)
-		ret = -EBUSY;
-	else {
-		ret = unregister_synth_event(se);
-		if (!ret) {
-			dyn_event_remove(&se->devent);
-			free_synth_event(se);
-		}
+		return -EBUSY;
+
+	if (trace_event_dyn_busy(&se->call))
+		return -EBUSY;
+
+	ret = unregister_synth_event(se);
+	if (!ret) {
+		dyn_event_remove(&se->devent);
+		free_synth_event(se);
 	}
 
 	return ret;
@@ -2102,6 +2104,9 @@ static int synth_event_release(struct dyn_event *ev)
 	if (event->ref)
 		return -EBUSY;
 
+	if (trace_event_dyn_busy(&event->call))
+		return -EBUSY;
+
 	ret = unregister_synth_event(event);
 	if (ret)
 		return ret;
diff --git a/kernel/trace/trace_events_trigger.c b/kernel/trace/trace_events_trigger.c
index cf84d0f6583a..3d5c07239a2a 100644
--- a/kernel/trace/trace_events_trigger.c
+++ b/kernel/trace/trace_events_trigger.c
@@ -124,6 +124,18 @@ static void *trigger_next(struct seq_file *m, void *t, loff_t *pos)
 	return seq_list_next(t, &event_file->triggers, pos);
 }
 
+static bool check_user_trigger(struct trace_event_file *file)
+{
+	struct event_trigger_data *data;
+
+	list_for_each_entry_rcu(data, &file->triggers, list) {
+		if (data->flags & EVENT_TRIGGER_FL_PROBE)
+			continue;
+		return true;
+	}
+	return false;
+}
+
 static void *trigger_start(struct seq_file *m, loff_t *pos)
 {
 	struct trace_event_file *event_file;
@@ -134,7 +146,7 @@ static void *trigger_start(struct seq_file *m, loff_t *pos)
 	if (unlikely(!event_file))
 		return ERR_PTR(-ENODEV);
 
-	if (list_empty(&event_file->triggers))
+	if (list_empty(&event_file->triggers) || !check_user_trigger(event_file))
 		return *pos == 0 ? SHOW_AVAILABLE_TRIGGERS : NULL;
 
 	return seq_list_start(&event_file->triggers, *pos);
@@ -1334,7 +1346,7 @@ void event_enable_trigger_free(struct event_trigger_ops *ops,
 	if (!data->ref) {
 		/* Remove the SOFT_MODE flag */
 		trace_event_enable_disable(enable_data->file, 0, 1);
-		module_put(enable_data->file->event_call->mod);
+		trace_event_put_ref(enable_data->file->event_call);
 		trigger_data_free(data);
 		kfree(enable_data);
 	}
@@ -1481,7 +1493,7 @@ int event_enable_trigger_func(struct event_command *cmd_ops,
 
  out_reg:
 	/* Don't let event modules unload while probe registered */
-	ret = try_module_get(event_enable_file->event_call->mod);
+	ret = trace_event_try_get_ref(event_enable_file->event_call);
 	if (!ret) {
 		ret = -EBUSY;
 		goto out_free;
@@ -1510,7 +1522,7 @@ int event_enable_trigger_func(struct event_command *cmd_ops,
  out_disable:
 	trace_event_enable_disable(event_enable_file, 0, 1);
  out_put:
-	module_put(event_enable_file->event_call->mod);
+	trace_event_put_ref(event_enable_file->event_call);
  out_free:
 	if (cmd_ops->set_filter)
 		cmd_ops->set_filter(NULL, trigger_data, NULL);
diff --git a/kernel/trace/trace_hwlat.c b/kernel/trace/trace_hwlat.c
index 14f46aae1981..1b83d75eb103 100644
--- a/kernel/trace/trace_hwlat.c
+++ b/kernel/trace/trace_hwlat.c
@@ -325,10 +325,10 @@ static void move_to_next_cpu(void)
 	if (!cpumask_equal(current_mask, current->cpus_ptr))
 		goto change_mode;
 
-	get_online_cpus();
+	cpus_read_lock();
 	cpumask_and(current_mask, cpu_online_mask, tr->tracing_cpumask);
 	next_cpu = cpumask_next(raw_smp_processor_id(), current_mask);
-	put_online_cpus();
+	cpus_read_unlock();
 
 	if (next_cpu >= nr_cpu_ids)
 		next_cpu = cpumask_first(current_mask);
@@ -398,7 +398,7 @@ static void stop_single_kthread(void)
 	struct hwlat_kthread_data *kdata = get_cpu_data();
 	struct task_struct *kthread;
 
-	get_online_cpus();
+	cpus_read_lock();
 	kthread = kdata->kthread;
 
 	if (!kthread)
@@ -408,7 +408,7 @@ static void stop_single_kthread(void)
 	kdata->kthread = NULL;
 
 out_put_cpus:
-	put_online_cpus();
+	cpus_read_unlock();
 }
 
 
@@ -425,14 +425,14 @@ static int start_single_kthread(struct trace_array *tr)
 	struct task_struct *kthread;
 	int next_cpu;
 
-	get_online_cpus();
+	cpus_read_lock();
 	if (kdata->kthread)
 		goto out_put_cpus;
 
 	kthread = kthread_create(kthread_fn, NULL, "hwlatd");
 	if (IS_ERR(kthread)) {
 		pr_err(BANNER "could not start sampling thread\n");
-		put_online_cpus();
+		cpus_read_unlock();
 		return -ENOMEM;
 	}
 
@@ -452,7 +452,7 @@ static int start_single_kthread(struct trace_array *tr)
 	wake_up_process(kthread);
 
 out_put_cpus:
-	put_online_cpus();
+	cpus_read_unlock();
 	return 0;
 }
 
@@ -479,10 +479,10 @@ static void stop_per_cpu_kthreads(void)
 {
 	unsigned int cpu;
 
-	get_online_cpus();
+	cpus_read_lock();
 	for_each_online_cpu(cpu)
 		stop_cpu_kthread(cpu);
-	put_online_cpus();
+	cpus_read_unlock();
 }
 
 /*
@@ -515,7 +515,7 @@ static void hwlat_hotplug_workfn(struct work_struct *dummy)
 
 	mutex_lock(&trace_types_lock);
 	mutex_lock(&hwlat_data.lock);
-	get_online_cpus();
+	cpus_read_lock();
 
 	if (!hwlat_busy || hwlat_data.thread_mode != MODE_PER_CPU)
 		goto out_unlock;
@@ -526,7 +526,7 @@ static void hwlat_hotplug_workfn(struct work_struct *dummy)
 	start_cpu_kthread(cpu);
 
 out_unlock:
-	put_online_cpus();
+	cpus_read_unlock();
 	mutex_unlock(&hwlat_data.lock);
 	mutex_unlock(&trace_types_lock);
 }
@@ -582,7 +582,7 @@ static int start_per_cpu_kthreads(struct trace_array *tr)
 	unsigned int cpu;
 	int retval;
 
-	get_online_cpus();
+	cpus_read_lock();
 	/*
 	 * Run only on CPUs in which hwlat is allowed to run.
 	 */
@@ -596,12 +596,12 @@ static int start_per_cpu_kthreads(struct trace_array *tr)
 		if (retval)
 			goto out_error;
 	}
-	put_online_cpus();
+	cpus_read_unlock();
 
 	return 0;
 
 out_error:
-	put_online_cpus();
+	cpus_read_unlock();
 	stop_per_cpu_kthreads();
 	return retval;
 }
diff --git a/kernel/trace/trace_kdb.c b/kernel/trace/trace_kdb.c
index 9da76104f7a2..59857a1ee44c 100644
--- a/kernel/trace/trace_kdb.c
+++ b/kernel/trace/trace_kdb.c
@@ -147,11 +147,17 @@ static int kdb_ftdump(int argc, const char **argv)
 	return 0;
 }
 
+static kdbtab_t ftdump_cmd = {
+	.name = "ftdump",
+	.func = kdb_ftdump,
+	.usage = "[skip_#entries] [cpu]",
+	.help = "Dump ftrace log; -skip dumps last #entries",
+	.flags = KDB_ENABLE_ALWAYS_SAFE,
+};
+
 static __init int kdb_ftrace_register(void)
 {
-	kdb_register_flags("ftdump", kdb_ftdump, "[skip_#entries] [cpu]",
-			    "Dump ftrace log; -skip dumps last #entries", 0,
-			    KDB_ENABLE_ALWAYS_SAFE);
+	kdb_register(&ftdump_cmd);
 	return 0;
 }
 
diff --git a/kernel/trace/trace_kprobe.c b/kernel/trace/trace_kprobe.c
index ea6178cb5e33..3a64ba4bbad6 100644
--- a/kernel/trace/trace_kprobe.c
+++ b/kernel/trace/trace_kprobe.c
@@ -80,10 +80,6 @@ static struct trace_kprobe *to_trace_kprobe(struct dyn_event *ev)
 	for_each_dyn_event(dpos)		\
 		if (is_trace_kprobe(dpos) && (pos = to_trace_kprobe(dpos)))
 
-#define SIZEOF_TRACE_KPROBE(n)				\
-	(offsetof(struct trace_kprobe, tp.args) +	\
-	(sizeof(struct probe_arg) * (n)))
-
 static nokprobe_inline bool trace_kprobe_is_return(struct trace_kprobe *tk)
 {
 	return tk->rp.handler != NULL;
@@ -265,7 +261,7 @@ static struct trace_kprobe *alloc_trace_kprobe(const char *group,
 	struct trace_kprobe *tk;
 	int ret = -ENOMEM;
 
-	tk = kzalloc(SIZEOF_TRACE_KPROBE(nargs), GFP_KERNEL);
+	tk = kzalloc(struct_size(tk, tp.args, nargs), GFP_KERNEL);
 	if (!tk)
 		return ERR_PTR(ret);
 
@@ -543,6 +539,10 @@ static int unregister_trace_kprobe(struct trace_kprobe *tk)
 	if (trace_probe_is_enabled(&tk->tp))
 		return -EBUSY;
 
+	/* If there's a reference to the dynamic event */
+	if (trace_event_dyn_busy(trace_probe_event_call(&tk->tp)))
+		return -EBUSY;
+
 	/* Will fail if probe is being used by ftrace or perf */
 	if (unregister_kprobe_event(tk))
 		return -EBUSY;
@@ -618,7 +618,7 @@ static int append_trace_kprobe(struct trace_kprobe *tk, struct trace_kprobe *to)
 	if (ret)
 		trace_probe_unlink(&tk->tp);
 	else
-		dyn_event_add(&tk->devent);
+		dyn_event_add(&tk->devent, trace_probe_event_call(&tk->tp));
 
 	return ret;
 }
@@ -647,7 +647,11 @@ static int register_trace_kprobe(struct trace_kprobe *tk)
 	/* Register new event */
 	ret = register_kprobe_event(tk);
 	if (ret) {
-		pr_warn("Failed to register probe event(%d)\n", ret);
+		if (ret == -EEXIST) {
+			trace_probe_log_set_index(0);
+			trace_probe_log_err(0, EVENT_EXIST);
+		} else
+			pr_warn("Failed to register probe event(%d)\n", ret);
 		goto end;
 	}
 
@@ -661,7 +665,7 @@ static int register_trace_kprobe(struct trace_kprobe *tk)
 	if (ret < 0)
 		unregister_kprobe_event(tk);
 	else
-		dyn_event_add(&tk->devent);
+		dyn_event_add(&tk->devent, trace_probe_event_call(&tk->tp));
 
 end:
 	mutex_unlock(&event_mutex);
@@ -703,14 +707,6 @@ static struct notifier_block trace_kprobe_module_nb = {
 	.priority = 1	/* Invoked after kprobe module callback */
 };
 
-/* Convert certain expected symbols into '_' when generating event names */
-static inline void sanitize_event_name(char *name)
-{
-	while (*name++ != '\0')
-		if (*name == ':' || *name == '.')
-			*name = '_';
-}
-
 static int __trace_kprobe_create(int argc, const char *argv[])
 {
 	/*
@@ -742,6 +738,7 @@ static int __trace_kprobe_create(int argc, const char *argv[])
 	bool is_return = false;
 	char *symbol = NULL, *tmp = NULL;
 	const char *event = NULL, *group = KPROBE_EVENT_SYSTEM;
+	enum probe_print_type ptype;
 	int maxactive = 0;
 	long offset = 0;
 	void *addr = NULL;
@@ -869,20 +866,14 @@ static int __trace_kprobe_create(int argc, const char *argv[])
 
 	/* parse arguments */
 	for (i = 0; i < argc && i < MAX_TRACE_ARGS; i++) {
-		tmp = kstrdup(argv[i], GFP_KERNEL);
-		if (!tmp) {
-			ret = -ENOMEM;
-			goto error;
-		}
-
 		trace_probe_log_set_index(i + 2);
-		ret = traceprobe_parse_probe_arg(&tk->tp, i, tmp, flags);
-		kfree(tmp);
+		ret = traceprobe_parse_probe_arg(&tk->tp, i, argv[i], flags);
 		if (ret)
 			goto error;	/* This can be -ENOMEM */
 	}
 
-	ret = traceprobe_set_print_fmt(&tk->tp, is_return);
+	ptype = is_return ? PROBE_PRINT_RETURN : PROBE_PRINT_NORMAL;
+	ret = traceprobe_set_print_fmt(&tk->tp, ptype);
 	if (ret < 0)
 		goto error;
 
@@ -1330,9 +1321,10 @@ probe_mem_read(void *dest, void *src, size_t size)
 
 /* Note that we don't verify it, since the code does not come from user space */
 static int
-process_fetch_insn(struct fetch_insn *code, struct pt_regs *regs, void *dest,
+process_fetch_insn(struct fetch_insn *code, void *rec, void *dest,
 		   void *base)
 {
+	struct pt_regs *regs = rec;
 	unsigned long val;
 
 retry:
@@ -1806,6 +1798,7 @@ struct trace_event_call *
 create_local_trace_kprobe(char *func, void *addr, unsigned long offs,
 			  bool is_return)
 {
+	enum probe_print_type ptype;
 	struct trace_kprobe *tk;
 	int ret;
 	char *event;
@@ -1829,7 +1822,9 @@ create_local_trace_kprobe(char *func, void *addr, unsigned long offs,
 
 	init_trace_event_call(tk);
 
-	if (traceprobe_set_print_fmt(&tk->tp, trace_kprobe_is_return(tk)) < 0) {
+	ptype = trace_kprobe_is_return(tk) ?
+		PROBE_PRINT_RETURN : PROBE_PRINT_NORMAL;
+	if (traceprobe_set_print_fmt(&tk->tp, ptype) < 0) {
 		ret = -ENOMEM;
 		goto error;
 	}
diff --git a/kernel/trace/trace_osnoise.c b/kernel/trace/trace_osnoise.c
index b61eefe5ccf5..ce053619f289 100644
--- a/kernel/trace/trace_osnoise.c
+++ b/kernel/trace/trace_osnoise.c
@@ -1498,12 +1498,12 @@ static void stop_per_cpu_kthreads(void)
 {
 	int cpu;
 
-	get_online_cpus();
+	cpus_read_lock();
 
 	for_each_online_cpu(cpu)
 		stop_kthread(cpu);
 
-	put_online_cpus();
+	cpus_read_unlock();
 }
 
 /*
@@ -1548,10 +1548,10 @@ static int start_kthread(unsigned int cpu)
 static int start_per_cpu_kthreads(struct trace_array *tr)
 {
 	struct cpumask *current_mask = &save_cpumask;
-	int retval;
+	int retval = 0;
 	int cpu;
 
-	get_online_cpus();
+	cpus_read_lock();
 	/*
 	 * Run only on CPUs in which trace and osnoise are allowed to run.
 	 */
@@ -1568,13 +1568,13 @@ static int start_per_cpu_kthreads(struct trace_array *tr)
 		retval = start_kthread(cpu);
 		if (retval) {
 			stop_per_cpu_kthreads();
-			return retval;
+			break;
 		}
 	}
 
-	put_online_cpus();
+	cpus_read_unlock();
 
-	return 0;
+	return retval;
 }
 
 #ifdef CONFIG_HOTPLUG_CPU
@@ -1590,7 +1590,7 @@ static void osnoise_hotplug_workfn(struct work_struct *dummy)
 		goto out_unlock_trace;
 
 	mutex_lock(&interface_lock);
-	get_online_cpus();
+	cpus_read_lock();
 
 	if (!cpumask_test_cpu(cpu, &osnoise_cpumask))
 		goto out_unlock;
@@ -1601,7 +1601,7 @@ static void osnoise_hotplug_workfn(struct work_struct *dummy)
 	start_kthread(cpu);
 
 out_unlock:
-	put_online_cpus();
+	cpus_read_unlock();
 	mutex_unlock(&interface_lock);
 out_unlock_trace:
 	mutex_unlock(&trace_types_lock);
@@ -1743,11 +1743,11 @@ osnoise_cpus_write(struct file *filp, const char __user *ubuf, size_t count,
 	/*
 	 * osnoise_cpumask is read by CPU hotplug operations.
 	 */
-	get_online_cpus();
+	cpus_read_lock();
 
 	cpumask_copy(&osnoise_cpumask, osnoise_cpumask_new);
 
-	put_online_cpus();
+	cpus_read_unlock();
 	mutex_unlock(&interface_lock);
 
 	if (running)
diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c
index a0bf446bb034..c2ca40e8595b 100644
--- a/kernel/trace/trace_output.c
+++ b/kernel/trace/trace_output.c
@@ -492,8 +492,13 @@ int trace_print_lat_fmt(struct trace_seq *s, struct trace_entry *entry)
 	trace_seq_printf(s, "%c%c%c",
 			 irqs_off, need_resched, hardsoft_irq);
 
-	if (entry->preempt_count)
-		trace_seq_printf(s, "%x", entry->preempt_count);
+	if (entry->preempt_count & 0xf)
+		trace_seq_printf(s, "%x", entry->preempt_count & 0xf);
+	else
+		trace_seq_putc(s, '.');
+
+	if (entry->preempt_count & 0xf0)
+		trace_seq_printf(s, "%x", entry->preempt_count >> 4);
 	else
 		trace_seq_putc(s, '.');
 
@@ -656,7 +661,7 @@ int trace_print_lat_context(struct trace_iterator *iter)
 		trace_seq_printf(
 			s, "%16s %7d %3d %d %08x %08lx ",
 			comm, entry->pid, iter->cpu, entry->flags,
-			entry->preempt_count, iter->idx);
+			entry->preempt_count & 0xf, iter->idx);
 	} else {
 		lat_print_generic(s, entry, iter->cpu);
 	}
diff --git a/kernel/trace/trace_probe.c b/kernel/trace/trace_probe.c
index 15413ad7cef2..3ed2a3f37297 100644
--- a/kernel/trace/trace_probe.c
+++ b/kernel/trace/trace_probe.c
@@ -233,6 +233,9 @@ int traceprobe_parse_event_name(const char **pevent, const char **pgroup,
 	int len;
 
 	slash = strchr(event, '/');
+	if (!slash)
+		slash = strchr(event, '.');
+
 	if (slash) {
 		if (slash == event) {
 			trace_probe_log_err(offset, NO_GROUP_NAME);
@@ -316,6 +319,13 @@ static int parse_probe_vars(char *arg, const struct fetch_type *t,
 		code->op = FETCH_OP_ARG;
 		code->param = (unsigned int)param - 1;
 #endif
+	} else if (flags & TPARG_FL_TPOINT) {
+		if (code->data)
+			return -EFAULT;
+		code->data = kstrdup(arg, GFP_KERNEL);
+		if (!code->data)
+			return -ENOMEM;
+		code->op = FETCH_OP_TP_ARG;
 	} else
 		goto inval_var;
 
@@ -540,26 +550,34 @@ static int __parse_bitfield_probe_arg(const char *bf,
 }
 
 /* String length checking wrapper */
-static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
+static int traceprobe_parse_probe_arg_body(const char *argv, ssize_t *size,
 		struct probe_arg *parg, unsigned int flags, int offset)
 {
 	struct fetch_insn *code, *scode, *tmp = NULL;
 	char *t, *t2, *t3;
+	char *arg;
 	int ret, len;
 
+	arg = kstrdup(argv, GFP_KERNEL);
+	if (!arg)
+		return -ENOMEM;
+
+	ret = -EINVAL;
 	len = strlen(arg);
 	if (len > MAX_ARGSTR_LEN) {
 		trace_probe_log_err(offset, ARG_TOO_LONG);
-		return -EINVAL;
+		goto out;
 	} else if (len == 0) {
 		trace_probe_log_err(offset, NO_ARG_BODY);
-		return -EINVAL;
+		goto out;
 	}
 
+	ret = -ENOMEM;
 	parg->comm = kstrdup(arg, GFP_KERNEL);
 	if (!parg->comm)
-		return -ENOMEM;
+		goto out;
 
+	ret = -EINVAL;
 	t = strchr(arg, ':');
 	if (t) {
 		*t = '\0';
@@ -571,22 +589,22 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 				offset += t2 + strlen(t2) - arg;
 				trace_probe_log_err(offset,
 						    ARRAY_NO_CLOSE);
-				return -EINVAL;
+				goto out;
 			} else if (t3[1] != '\0') {
 				trace_probe_log_err(offset + t3 + 1 - arg,
 						    BAD_ARRAY_SUFFIX);
-				return -EINVAL;
+				goto out;
 			}
 			*t3 = '\0';
 			if (kstrtouint(t2, 0, &parg->count) || !parg->count) {
 				trace_probe_log_err(offset + t2 - arg,
 						    BAD_ARRAY_NUM);
-				return -EINVAL;
+				goto out;
 			}
 			if (parg->count > MAX_ARRAY_LEN) {
 				trace_probe_log_err(offset + t2 - arg,
 						    ARRAY_TOO_BIG);
-				return -EINVAL;
+				goto out;
 			}
 		}
 	}
@@ -598,29 +616,30 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 	if (strcmp(arg, "$comm") == 0 || strncmp(arg, "\\\"", 2) == 0) {
 		/* The type of $comm must be "string", and not an array. */
 		if (parg->count || (t && strcmp(t, "string")))
-			return -EINVAL;
+			goto out;
 		parg->type = find_fetch_type("string");
 	} else
 		parg->type = find_fetch_type(t);
 	if (!parg->type) {
 		trace_probe_log_err(offset + (t ? (t - arg) : 0), BAD_TYPE);
-		return -EINVAL;
+		goto out;
 	}
 	parg->offset = *size;
 	*size += parg->type->size * (parg->count ?: 1);
 
+	ret = -ENOMEM;
 	if (parg->count) {
 		len = strlen(parg->type->fmttype) + 6;
 		parg->fmt = kmalloc(len, GFP_KERNEL);
 		if (!parg->fmt)
-			return -ENOMEM;
+			goto out;
 		snprintf(parg->fmt, len, "%s[%d]", parg->type->fmttype,
 			 parg->count);
 	}
 
 	code = tmp = kcalloc(FETCH_INSN_MAX, sizeof(*code), GFP_KERNEL);
 	if (!code)
-		return -ENOMEM;
+		goto out;
 	code[FETCH_INSN_MAX - 1].op = FETCH_OP_END;
 
 	ret = parse_probe_arg(arg, parg->type, &code, &code[FETCH_INSN_MAX - 1],
@@ -628,19 +647,20 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 	if (ret)
 		goto fail;
 
+	ret = -EINVAL;
 	/* Store operation */
 	if (!strcmp(parg->type->name, "string") ||
 	    !strcmp(parg->type->name, "ustring")) {
 		if (code->op != FETCH_OP_DEREF && code->op != FETCH_OP_UDEREF &&
 		    code->op != FETCH_OP_IMM && code->op != FETCH_OP_COMM &&
-		    code->op != FETCH_OP_DATA) {
+		    code->op != FETCH_OP_DATA && code->op != FETCH_OP_TP_ARG) {
 			trace_probe_log_err(offset + (t ? (t - arg) : 0),
 					    BAD_STRING);
-			ret = -EINVAL;
 			goto fail;
 		}
 		if ((code->op == FETCH_OP_IMM || code->op == FETCH_OP_COMM ||
-		     code->op == FETCH_OP_DATA) || parg->count) {
+		     code->op == FETCH_OP_DATA) || code->op == FETCH_OP_TP_ARG ||
+		     parg->count) {
 			/*
 			 * IMM, DATA and COMM is pointing actual address, those
 			 * must be kept, and if parg->count != 0, this is an
@@ -650,7 +670,6 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 			code++;
 			if (code->op != FETCH_OP_NOP) {
 				trace_probe_log_err(offset, TOO_MANY_OPS);
-				ret = -EINVAL;
 				goto fail;
 			}
 		}
@@ -672,7 +691,6 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 		code++;
 		if (code->op != FETCH_OP_NOP) {
 			trace_probe_log_err(offset, TOO_MANY_OPS);
-			ret = -EINVAL;
 			goto fail;
 		}
 		code->op = FETCH_OP_ST_RAW;
@@ -687,6 +705,7 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 			goto fail;
 		}
 	}
+	ret = -EINVAL;
 	/* Loop(Array) operation */
 	if (parg->count) {
 		if (scode->op != FETCH_OP_ST_MEM &&
@@ -694,13 +713,11 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 		    scode->op != FETCH_OP_ST_USTRING) {
 			trace_probe_log_err(offset + (t ? (t - arg) : 0),
 					    BAD_STRING);
-			ret = -EINVAL;
 			goto fail;
 		}
 		code++;
 		if (code->op != FETCH_OP_NOP) {
 			trace_probe_log_err(offset, TOO_MANY_OPS);
-			ret = -EINVAL;
 			goto fail;
 		}
 		code->op = FETCH_OP_LP_ARRAY;
@@ -709,6 +726,7 @@ static int traceprobe_parse_probe_arg_body(char *arg, ssize_t *size,
 	code++;
 	code->op = FETCH_OP_END;
 
+	ret = 0;
 	/* Shrink down the code buffer */
 	parg->code = kcalloc(code - tmp + 1, sizeof(*code), GFP_KERNEL);
 	if (!parg->code)
@@ -724,6 +742,8 @@ fail:
 				kfree(code->data);
 	}
 	kfree(tmp);
+out:
+	kfree(arg);
 
 	return ret;
 }
@@ -745,11 +765,11 @@ static int traceprobe_conflict_field_name(const char *name,
 	return 0;
 }
 
-int traceprobe_parse_probe_arg(struct trace_probe *tp, int i, char *arg,
+int traceprobe_parse_probe_arg(struct trace_probe *tp, int i, const char *arg,
 				unsigned int flags)
 {
 	struct probe_arg *parg = &tp->args[i];
-	char *body;
+	const char *body;
 
 	/* Increment count for freeing args in error case */
 	tp->nr_args++;
@@ -839,19 +859,29 @@ int traceprobe_update_arg(struct probe_arg *arg)
 /* When len=0, we just calculate the needed length */
 #define LEN_OR_ZERO (len ? len - pos : 0)
 static int __set_print_fmt(struct trace_probe *tp, char *buf, int len,
-			   bool is_return)
+			   enum probe_print_type ptype)
 {
 	struct probe_arg *parg;
 	int i, j;
 	int pos = 0;
 	const char *fmt, *arg;
 
-	if (!is_return) {
+	switch (ptype) {
+	case PROBE_PRINT_NORMAL:
 		fmt = "(%lx)";
 		arg = "REC->" FIELD_STRING_IP;
-	} else {
+		break;
+	case PROBE_PRINT_RETURN:
 		fmt = "(%lx <- %lx)";
 		arg = "REC->" FIELD_STRING_FUNC ", REC->" FIELD_STRING_RETIP;
+		break;
+	case PROBE_PRINT_EVENT:
+		fmt = "(%u)";
+		arg = "REC->" FIELD_STRING_TYPE;
+		break;
+	default:
+		WARN_ON_ONCE(1);
+		return 0;
 	}
 
 	pos += snprintf(buf + pos, LEN_OR_ZERO, "\"%s", fmt);
@@ -900,20 +930,20 @@ static int __set_print_fmt(struct trace_probe *tp, char *buf, int len,
 }
 #undef LEN_OR_ZERO
 
-int traceprobe_set_print_fmt(struct trace_probe *tp, bool is_return)
+int traceprobe_set_print_fmt(struct trace_probe *tp, enum probe_print_type ptype)
 {
 	struct trace_event_call *call = trace_probe_event_call(tp);
 	int len;
 	char *print_fmt;
 
 	/* First: called with 0 length to calculate the needed length */
-	len = __set_print_fmt(tp, NULL, 0, is_return);
+	len = __set_print_fmt(tp, NULL, 0, ptype);
 	print_fmt = kmalloc(len + 1, GFP_KERNEL);
 	if (!print_fmt)
 		return -ENOMEM;
 
 	/* Second: actually write the @print_fmt */
-	__set_print_fmt(tp, print_fmt, len + 1, is_return);
+	__set_print_fmt(tp, print_fmt, len + 1, ptype);
 	call->print_fmt = print_fmt;
 
 	return 0;
@@ -1029,11 +1059,36 @@ error:
 	return ret;
 }
 
+static struct trace_event_call *
+find_trace_event_call(const char *system, const char *event_name)
+{
+	struct trace_event_call *tp_event;
+	const char *name;
+
+	list_for_each_entry(tp_event, &ftrace_events, list) {
+		if (!tp_event->class->system ||
+		    strcmp(system, tp_event->class->system))
+			continue;
+		name = trace_event_name(tp_event);
+		if (!name || strcmp(event_name, name))
+			continue;
+		return tp_event;
+	}
+
+	return NULL;
+}
+
 int trace_probe_register_event_call(struct trace_probe *tp)
 {
 	struct trace_event_call *call = trace_probe_event_call(tp);
 	int ret;
 
+	lockdep_assert_held(&event_mutex);
+
+	if (find_trace_event_call(trace_probe_group_name(tp),
+				  trace_probe_name(tp)))
+		return -EEXIST;
+
 	ret = register_trace_event(&call->event);
 	if (!ret)
 		return -ENODEV;
diff --git a/kernel/trace/trace_probe.h b/kernel/trace/trace_probe.h
index 227d518e5ba5..99e7a5df025e 100644
--- a/kernel/trace/trace_probe.h
+++ b/kernel/trace/trace_probe.h
@@ -38,6 +38,7 @@
 #define FIELD_STRING_IP		"__probe_ip"
 #define FIELD_STRING_RETIP	"__probe_ret_ip"
 #define FIELD_STRING_FUNC	"__probe_func"
+#define FIELD_STRING_TYPE	"__probe_type"
 
 #undef DEFINE_FIELD
 #define DEFINE_FIELD(type, item, name, is_signed)			\
@@ -102,6 +103,7 @@ enum fetch_op {
 	FETCH_OP_MOD_BF,	/* Bitfield: .basesize, .lshift, .rshift */
 	// Stage 5 (loop) op
 	FETCH_OP_LP_ARRAY,	/* Array: .param = loop count */
+	FETCH_OP_TP_ARG,	/* Trace Point argument */
 	FETCH_OP_END,
 	FETCH_NOP_SYMBOL,	/* Unresolved Symbol holder */
 };
@@ -351,10 +353,11 @@ int trace_probe_create(const char *raw_command, int (*createfn)(int, const char
 #define TPARG_FL_RETURN BIT(0)
 #define TPARG_FL_KERNEL BIT(1)
 #define TPARG_FL_FENTRY BIT(2)
-#define TPARG_FL_MASK	GENMASK(2, 0)
+#define TPARG_FL_TPOINT BIT(3)
+#define TPARG_FL_MASK	GENMASK(3, 0)
 
 extern int traceprobe_parse_probe_arg(struct trace_probe *tp, int i,
-				char *arg, unsigned int flags);
+				const char *argv, unsigned int flags);
 
 extern int traceprobe_update_arg(struct probe_arg *arg);
 extern void traceprobe_free_probe_arg(struct probe_arg *arg);
@@ -363,7 +366,13 @@ extern int traceprobe_split_symbol_offset(char *symbol, long *offset);
 int traceprobe_parse_event_name(const char **pevent, const char **pgroup,
 				char *buf, int offset);
 
-extern int traceprobe_set_print_fmt(struct trace_probe *tp, bool is_return);
+enum probe_print_type {
+	PROBE_PRINT_NORMAL,
+	PROBE_PRINT_RETURN,
+	PROBE_PRINT_EVENT,
+};
+
+extern int traceprobe_set_print_fmt(struct trace_probe *tp, enum probe_print_type ptype);
 
 #ifdef CONFIG_PERF_EVENTS
 extern struct trace_event_call *
@@ -399,6 +408,7 @@ extern int traceprobe_define_arg_fields(struct trace_event_call *event_call,
 	C(NO_EVENT_NAME,	"Event name is not specified"),		\
 	C(EVENT_TOO_LONG,	"Event name is too long"),		\
 	C(BAD_EVENT_NAME,	"Event name must follow the same rules as C identifiers"), \
+	C(EVENT_EXIST,		"Given group/event name is already used by another event"), \
 	C(RETVAL_ON_PROBE,	"$retval is not available on probe"),	\
 	C(BAD_STACK_NUM,	"Invalid stack number"),		\
 	C(BAD_ARG_NUM,		"Invalid argument number"),		\
diff --git a/kernel/trace/trace_probe_tmpl.h b/kernel/trace/trace_probe_tmpl.h
index f003c5d02a3a..b3bdb8ddb862 100644
--- a/kernel/trace/trace_probe_tmpl.h
+++ b/kernel/trace/trace_probe_tmpl.h
@@ -54,7 +54,7 @@ fetch_apply_bitfield(struct fetch_insn *code, void *buf)
  * If dest is NULL, don't store result and return required dynamic data size.
  */
 static int
-process_fetch_insn(struct fetch_insn *code, struct pt_regs *regs,
+process_fetch_insn(struct fetch_insn *code, void *rec,
 		   void *dest, void *base);
 static nokprobe_inline int fetch_store_strlen(unsigned long addr);
 static nokprobe_inline int
@@ -188,7 +188,7 @@ __get_data_size(struct trace_probe *tp, struct pt_regs *regs)
 
 /* Store the value of each argument */
 static nokprobe_inline void
-store_trace_args(void *data, struct trace_probe *tp, struct pt_regs *regs,
+store_trace_args(void *data, struct trace_probe *tp, void *rec,
 		 int header_size, int maxlen)
 {
 	struct probe_arg *arg;
@@ -203,7 +203,7 @@ store_trace_args(void *data, struct trace_probe *tp, struct pt_regs *regs,
 		/* Point the dynamic data area if needed */
 		if (unlikely(arg->dynamic))
 			*dl = make_data_loc(maxlen, dyndata - base);
-		ret = process_fetch_insn(arg->code, regs, dl, base);
+		ret = process_fetch_insn(arg->code, rec, dl, base);
 		if (unlikely(ret < 0 && arg->dynamic)) {
 			*dl = make_data_loc(0, dyndata - base);
 		} else {
diff --git a/kernel/trace/trace_synth.h b/kernel/trace/trace_synth.h
index 4007fe95cf42..b29595fe3ac5 100644
--- a/kernel/trace/trace_synth.h
+++ b/kernel/trace/trace_synth.h
@@ -5,7 +5,7 @@
 #include "trace_dynevent.h"
 
 #define SYNTH_SYSTEM		"synthetic"
-#define SYNTH_FIELDS_MAX	32
+#define SYNTH_FIELDS_MAX	64
 
 #define STR_VAR_LEN_MAX		MAX_FILTER_STR_VAL /* must be multiple of sizeof(u64) */
 
diff --git a/kernel/trace/trace_uprobe.c b/kernel/trace/trace_uprobe.c
index 9b50869a5ddb..225ce569bf8f 100644
--- a/kernel/trace/trace_uprobe.c
+++ b/kernel/trace/trace_uprobe.c
@@ -83,10 +83,6 @@ static struct trace_uprobe *to_trace_uprobe(struct dyn_event *ev)
 	for_each_dyn_event(dpos)		\
 		if (is_trace_uprobe(dpos) && (pos = to_trace_uprobe(dpos)))
 
-#define SIZEOF_TRACE_UPROBE(n)				\
-	(offsetof(struct trace_uprobe, tp.args) +	\
-	(sizeof(struct probe_arg) * (n)))
-
 static int register_uprobe_event(struct trace_uprobe *tu);
 static int unregister_uprobe_event(struct trace_uprobe *tu);
 
@@ -217,9 +213,10 @@ static unsigned long translate_user_vaddr(unsigned long file_offset)
 
 /* Note that we don't verify it, since the code does not come from user space */
 static int
-process_fetch_insn(struct fetch_insn *code, struct pt_regs *regs, void *dest,
+process_fetch_insn(struct fetch_insn *code, void *rec, void *dest,
 		   void *base)
 {
+	struct pt_regs *regs = rec;
 	unsigned long val;
 
 	/* 1st stage: get value from context */
@@ -340,7 +337,7 @@ alloc_trace_uprobe(const char *group, const char *event, int nargs, bool is_ret)
 	struct trace_uprobe *tu;
 	int ret;
 
-	tu = kzalloc(SIZEOF_TRACE_UPROBE(nargs), GFP_KERNEL);
+	tu = kzalloc(struct_size(tu, tp.args, nargs), GFP_KERNEL);
 	if (!tu)
 		return ERR_PTR(-ENOMEM);
 
@@ -393,6 +390,10 @@ static int unregister_trace_uprobe(struct trace_uprobe *tu)
 	if (trace_probe_has_sibling(&tu->tp))
 		goto unreg;
 
+	/* If there's a reference to the dynamic event */
+	if (trace_event_dyn_busy(trace_probe_event_call(&tu->tp)))
+		return -EBUSY;
+
 	ret = unregister_uprobe_event(tu);
 	if (ret)
 		return ret;
@@ -455,7 +456,7 @@ static int append_trace_uprobe(struct trace_uprobe *tu, struct trace_uprobe *to)
 	/* Append to existing event */
 	ret = trace_probe_append(&tu->tp, &to->tp);
 	if (!ret)
-		dyn_event_add(&tu->devent);
+		dyn_event_add(&tu->devent, trace_probe_event_call(&tu->tp));
 
 	return ret;
 }
@@ -514,11 +515,15 @@ static int register_trace_uprobe(struct trace_uprobe *tu)
 
 	ret = register_uprobe_event(tu);
 	if (ret) {
-		pr_warn("Failed to register probe event(%d)\n", ret);
+		if (ret == -EEXIST) {
+			trace_probe_log_set_index(0);
+			trace_probe_log_err(0, EVENT_EXIST);
+		} else
+			pr_warn("Failed to register probe event(%d)\n", ret);
 		goto end;
 	}
 
-	dyn_event_add(&tu->devent);
+	dyn_event_add(&tu->devent, trace_probe_event_call(&tu->tp));
 
 end:
 	mutex_unlock(&event_mutex);
@@ -536,6 +541,7 @@ static int __trace_uprobe_create(int argc, const char **argv)
 	const char *event = NULL, *group = UPROBE_EVENT_SYSTEM;
 	char *arg, *filename, *rctr, *rctr_end, *tmp;
 	char buf[MAX_EVENT_NAME_LEN];
+	enum probe_print_type ptype;
 	struct path path;
 	unsigned long offset, ref_ctr_offset;
 	bool is_return = false;
@@ -680,21 +686,15 @@ static int __trace_uprobe_create(int argc, const char **argv)
 
 	/* parse arguments */
 	for (i = 0; i < argc && i < MAX_TRACE_ARGS; i++) {
-		tmp = kstrdup(argv[i], GFP_KERNEL);
-		if (!tmp) {
-			ret = -ENOMEM;
-			goto error;
-		}
-
 		trace_probe_log_set_index(i + 2);
-		ret = traceprobe_parse_probe_arg(&tu->tp, i, tmp,
+		ret = traceprobe_parse_probe_arg(&tu->tp, i, argv[i],
 					is_return ? TPARG_FL_RETURN : 0);
-		kfree(tmp);
 		if (ret)
 			goto error;
 	}
 
-	ret = traceprobe_set_print_fmt(&tu->tp, is_ret_probe(tu));
+	ptype = is_ret_probe(tu) ? PROBE_PRINT_RETURN : PROBE_PRINT_NORMAL;
+	ret = traceprobe_set_print_fmt(&tu->tp, ptype);
 	if (ret < 0)
 		goto error;
 
@@ -1585,6 +1585,7 @@ struct trace_event_call *
 create_local_trace_uprobe(char *name, unsigned long offs,
 			  unsigned long ref_ctr_offset, bool is_return)
 {
+	enum probe_print_type ptype;
 	struct trace_uprobe *tu;
 	struct path path;
 	int ret;
@@ -1619,7 +1620,8 @@ create_local_trace_uprobe(char *name, unsigned long offs,
 	tu->filename = kstrdup(name, GFP_KERNEL);
 	init_trace_event_call(tu);
 
-	if (traceprobe_set_print_fmt(&tu->tp, is_ret_probe(tu)) < 0) {
+	ptype = is_ret_probe(tu) ? PROBE_PRINT_RETURN : PROBE_PRINT_NORMAL;
+	if (traceprobe_set_print_fmt(&tu->tp, ptype) < 0) {
 		ret = -ENOMEM;
 		goto error;
 	}
diff --git a/kernel/tracepoint.c b/kernel/tracepoint.c
index efd14c79fab4..64ea283f2f86 100644
--- a/kernel/tracepoint.c
+++ b/kernel/tracepoint.c
@@ -577,7 +577,7 @@ bool trace_module_has_bad_taint(struct module *mod)
 static BLOCKING_NOTIFIER_HEAD(tracepoint_notify_list);
 
 /**
- * register_tracepoint_notifier - register tracepoint coming/going notifier
+ * register_tracepoint_module_notifier - register tracepoint coming/going notifier
  * @nb: notifier block
  *
  * Notifiers registered with this function are called on module
@@ -603,7 +603,7 @@ end:
 EXPORT_SYMBOL_GPL(register_tracepoint_module_notifier);
 
 /**
- * unregister_tracepoint_notifier - unregister tracepoint coming/going notifier
+ * unregister_tracepoint_module_notifier - unregister tracepoint coming/going notifier
  * @nb: notifier block
  *
  * The notifier block callback should expect a "struct tp_module" data
diff --git a/kernel/user.c b/kernel/user.c
index c82399c1618a..e2cf8c22b539 100644
--- a/kernel/user.c
+++ b/kernel/user.c
@@ -129,6 +129,22 @@ static struct user_struct *uid_hash_find(kuid_t uid, struct hlist_head *hashent)
 	return NULL;
 }
 
+static int user_epoll_alloc(struct user_struct *up)
+{
+#ifdef CONFIG_EPOLL
+	return percpu_counter_init(&up->epoll_watches, 0, GFP_KERNEL);
+#else
+	return 0;
+#endif
+}
+
+static void user_epoll_free(struct user_struct *up)
+{
+#ifdef CONFIG_EPOLL
+	percpu_counter_destroy(&up->epoll_watches);
+#endif
+}
+
 /* IRQs are disabled and uidhash_lock is held upon function entry.
  * IRQ state (as stored in flags) is restored and uidhash_lock released
  * upon function exit.
@@ -138,6 +154,7 @@ static void free_user(struct user_struct *up, unsigned long flags)
 {
 	uid_hash_remove(up);
 	spin_unlock_irqrestore(&uidhash_lock, flags);
+	user_epoll_free(up);
 	kmem_cache_free(uid_cachep, up);
 }
 
@@ -185,6 +202,10 @@ struct user_struct *alloc_uid(kuid_t uid)
 
 		new->uid = uid;
 		refcount_set(&new->__count, 1);
+		if (user_epoll_alloc(new)) {
+			kmem_cache_free(uid_cachep, new);
+			return NULL;
+		}
 		ratelimit_state_init(&new->ratelimit, HZ, 100);
 		ratelimit_set_flags(&new->ratelimit, RATELIMIT_MSG_ON_RELEASE);
 
@@ -195,6 +216,7 @@ struct user_struct *alloc_uid(kuid_t uid)
 		spin_lock_irq(&uidhash_lock);
 		up = uid_hash_find(uid, hashent);
 		if (up) {
+			user_epoll_free(new);
 			kmem_cache_free(uid_cachep, new);
 		} else {
 			uid_hash_insert(new, hashent);
@@ -216,6 +238,9 @@ static int __init uid_cache_init(void)
 	for(n = 0; n < UIDHASH_SZ; ++n)
 		INIT_HLIST_HEAD(uidhash_table + n);
 
+	if (user_epoll_alloc(&root_user))
+		panic("root_user epoll percpu counter alloc failed");
+
 	/* Insert the root user immediately (init already runs as root) */
 	spin_lock_irq(&uidhash_lock);
 	uid_hash_insert(&root_user, uidhashentry(GLOBAL_ROOT_UID));
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 0f61b1ec385d..ed4a31e34098 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -1064,7 +1064,6 @@ config HARDLOCKUP_DETECTOR
 	depends on HAVE_HARDLOCKUP_DETECTOR_PERF || HAVE_HARDLOCKUP_DETECTOR_ARCH
 	select LOCKUP_DETECTOR
 	select HARDLOCKUP_DETECTOR_PERF if HAVE_HARDLOCKUP_DETECTOR_PERF
-	select HARDLOCKUP_DETECTOR_ARCH if HAVE_HARDLOCKUP_DETECTOR_ARCH
 	help
 	  Say Y here to enable the kernel to act as a watchdog to detect
 	  hard lockups.
@@ -2061,8 +2060,9 @@ config TEST_MIN_HEAP
 	  If unsure, say N.
 
 config TEST_SORT
-	tristate "Array-based sort test"
-	depends on DEBUG_KERNEL || m
+	tristate "Array-based sort test" if !KUNIT_ALL_TESTS
+	depends on KUNIT
+	default KUNIT_ALL_TESTS
 	help
 	  This option enables the self-test function of 'sort()' at boot,
 	  or at module load time.
@@ -2443,8 +2443,7 @@ config SLUB_KUNIT_TEST
 
 config RATIONAL_KUNIT_TEST
 	tristate "KUnit test for rational.c" if !KUNIT_ALL_TESTS
-	depends on KUNIT
-	select RATIONAL
+	depends on KUNIT && RATIONAL
 	default KUNIT_ALL_TESTS
 	help
 	  This builds the rational math unit test.
diff --git a/lib/bootconfig.c b/lib/bootconfig.c
index 927017431fb6..f8419cff1147 100644
--- a/lib/bootconfig.c
+++ b/lib/bootconfig.c
@@ -142,16 +142,16 @@ xbc_node_match_prefix(struct xbc_node *node, const char **prefix)
 }
 
 /**
- * xbc_node_find_child() - Find a child node which matches given key
+ * xbc_node_find_subkey() - Find a subkey node which matches given key
  * @parent: An XBC node.
  * @key: A key string.
  *
- * Search a node under @parent which matches @key. The @key can contain
+ * Search a key node under @parent which matches @key. The @key can contain
  * several words jointed with '.'. If @parent is NULL, this searches the
  * node from whole tree. Return NULL if no node is matched.
  */
 struct xbc_node * __init
-xbc_node_find_child(struct xbc_node *parent, const char *key)
+xbc_node_find_subkey(struct xbc_node *parent, const char *key)
 {
 	struct xbc_node *node;
 
@@ -191,7 +191,7 @@ const char * __init
 xbc_node_find_value(struct xbc_node *parent, const char *key,
 		    struct xbc_node **vnode)
 {
-	struct xbc_node *node = xbc_node_find_child(parent, key);
+	struct xbc_node *node = xbc_node_find_subkey(parent, key);
 
 	if (!node || !xbc_node_is_key(node))
 		return NULL;
diff --git a/lib/dump_stack.c b/lib/dump_stack.c
index cd3387bb34e5..6b7f1bf6715d 100644
--- a/lib/dump_stack.c
+++ b/lib/dump_stack.c
@@ -89,7 +89,8 @@ static void __dump_stack(const char *log_lvl)
 }
 
 /**
- * dump_stack - dump the current task information and its stack trace
+ * dump_stack_lvl - dump the current task information and its stack trace
+ * @log_lvl: log level
  *
  * Architectures can override this implementation by implementing its own.
  */
diff --git a/lib/iov_iter.c b/lib/iov_iter.c
index e23123ae3a13..f2d50d69a6c3 100644
--- a/lib/iov_iter.c
+++ b/lib/iov_iter.c
@@ -672,7 +672,7 @@ static size_t copy_mc_pipe_to_iter(const void *addr, size_t bytes,
  * _copy_mc_to_iter - copy to iter with source memory error exception handling
  * @addr: source kernel address
  * @bytes: total transfer length
- * @iter: destination iterator
+ * @i: destination iterator
  *
  * The pmem driver deploys this for the dax operation
  * (dax_copy_to_iter()) for dax reads (bypass page-cache and the
@@ -690,6 +690,8 @@ static size_t copy_mc_pipe_to_iter(const void *addr, size_t bytes,
  * * ITER_KVEC, ITER_PIPE, and ITER_BVEC can return short copies.
  *   Compare to copy_to_iter() where only ITER_IOVEC attempts might return
  *   a short copy.
+ *
+ * Return: number of bytes copied (may be %0)
  */
 size_t _copy_mc_to_iter(const void *addr, size_t bytes, struct iov_iter *i)
 {
@@ -744,7 +746,7 @@ EXPORT_SYMBOL(_copy_from_iter_nocache);
  * _copy_from_iter_flushcache - write destination through cpu cache
  * @addr: destination kernel address
  * @bytes: total transfer length
- * @iter: source iterator
+ * @i: source iterator
  *
  * The pmem driver arranges for filesystem-dax to use this facility via
  * dax_copy_from_iter() for ensuring that writes to persistent memory
@@ -753,6 +755,8 @@ EXPORT_SYMBOL(_copy_from_iter_nocache);
  * all iterator types. The _copy_from_iter_nocache() only attempts to
  * bypass the cache for the ITER_IOVEC case, and on some archs may use
  * instructions that strand dirty-data in the cache.
+ *
+ * Return: number of bytes copied (may be %0)
  */
 size_t _copy_from_iter_flushcache(void *addr, size_t bytes, struct iov_iter *i)
 {
diff --git a/lib/logic_iomem.c b/lib/logic_iomem.c
index b76b92dd0f1f..9bdfde0c0f86 100644
--- a/lib/logic_iomem.c
+++ b/lib/logic_iomem.c
@@ -6,6 +6,7 @@
 #include <linux/types.h>
 #include <linux/slab.h>
 #include <linux/logic_iomem.h>
+#include <asm/io.h>
 
 struct logic_iomem_region {
 	const struct resource *res;
@@ -78,7 +79,7 @@ static void __iomem *real_ioremap(phys_addr_t offset, size_t size)
 static void real_iounmap(void __iomem *addr)
 {
 	WARN(1, "invalid iounmap for addr 0x%llx\n",
-	     (unsigned long long)addr);
+	     (unsigned long long __force)addr);
 }
 #endif /* CONFIG_LOGIC_IOMEM_FALLBACK */
 
@@ -172,14 +173,15 @@ EXPORT_SYMBOL(iounmap);
 static u##sz real_raw_read ## op(const volatile void __iomem *addr)	\
 {									\
 	WARN(1, "Invalid read" #op " at address %llx\n",		\
-	     (unsigned long long)addr);					\
+	     (unsigned long long __force)addr);				\
 	return (u ## sz)~0ULL;						\
 }									\
 									\
-void real_raw_write ## op(u ## sz val, volatile void __iomem *addr)	\
+static void real_raw_write ## op(u ## sz val,				\
+				 volatile void __iomem *addr)		\
 {									\
 	WARN(1, "Invalid writeq" #op " of 0x%llx at address %llx\n",	\
-	     (unsigned long long)val, (unsigned long long)addr);	\
+	     (unsigned long long)val, (unsigned long long __force)addr);\
 }									\
 
 MAKE_FALLBACK(b, 8);
@@ -192,14 +194,14 @@ MAKE_FALLBACK(q, 64);
 static void real_memset_io(volatile void __iomem *addr, int value, size_t size)
 {
 	WARN(1, "Invalid memset_io at address 0x%llx\n",
-	     (unsigned long long)addr);
+	     (unsigned long long __force)addr);
 }
 
 static void real_memcpy_fromio(void *buffer, const volatile void __iomem *addr,
 			       size_t size)
 {
 	WARN(1, "Invalid memcpy_fromio at address 0x%llx\n",
-	     (unsigned long long)addr);
+	     (unsigned long long __force)addr);
 
 	memset(buffer, 0xff, size);
 }
@@ -208,7 +210,7 @@ static void real_memcpy_toio(volatile void __iomem *addr, const void *buffer,
 			     size_t size)
 {
 	WARN(1, "Invalid memcpy_toio at address 0x%llx\n",
-	     (unsigned long long)addr);
+	     (unsigned long long __force)addr);
 }
 #endif /* CONFIG_LOGIC_IOMEM_FALLBACK */
 
diff --git a/lib/math/Kconfig b/lib/math/Kconfig
index f19bc9734fa7..0634b428d0cb 100644
--- a/lib/math/Kconfig
+++ b/lib/math/Kconfig
@@ -14,4 +14,4 @@ config PRIME_NUMBERS
 	  If unsure, say N.
 
 config RATIONAL
-	bool
+	tristate
diff --git a/lib/math/rational.c b/lib/math/rational.c
index c0ab51d8fbb9..ec59d426ea63 100644
--- a/lib/math/rational.c
+++ b/lib/math/rational.c
@@ -13,6 +13,7 @@
 #include <linux/export.h>
 #include <linux/minmax.h>
 #include <linux/limits.h>
+#include <linux/module.h>
 
 /*
  * calculate best rational approximation for a given fraction
@@ -106,3 +107,5 @@ void rational_best_approximation(
 }
 
 EXPORT_SYMBOL(rational_best_approximation);
+
+MODULE_LICENSE("GPL v2");
diff --git a/lib/test_printf.c b/lib/test_printf.c
index 8a48b61c3763..55082432f37e 100644
--- a/lib/test_printf.c
+++ b/lib/test_printf.c
@@ -614,7 +614,7 @@ page_flags_test(int section, int node, int zone, int last_cpupid,
 	bool append = false;
 	int i;
 
-	flags &= BIT(NR_PAGEFLAGS) - 1;
+	flags &= PAGEFLAGS_MASK;
 	if (flags) {
 		page_flags |= flags;
 		snprintf(cmp_buf + size, BUF_SIZE - size, "%s", name);
diff --git a/lib/test_scanf.c b/lib/test_scanf.c
index abae88848972..b620cf7de503 100644
--- a/lib/test_scanf.c
+++ b/lib/test_scanf.c
@@ -398,7 +398,7 @@ do {										\
 	test_array_8(fn, expect, test_buffer, fmt_buffer, result);		\
 } while (0)
 
-static void __init numbers_list(const char *delim)
+static void __init numbers_list_ll(const char *delim)
 {
 	numbers_list_8(unsigned long long, "%llu",   delim, "llu", check_ull);
 	numbers_list_8(long long,	   "%lld",   delim, "lld", check_ll);
@@ -406,28 +406,40 @@ static void __init numbers_list(const char *delim)
 	numbers_list_8(unsigned long long, "%llx",   delim, "llx", check_ull);
 	numbers_list_8(unsigned long long, "0x%llx", delim, "llx", check_ull);
 	numbers_list_8(long long,	   "0x%llx", delim, "lli", check_ll);
+}
 
+static void __init numbers_list_l(const char *delim)
+{
 	numbers_list_8(unsigned long,	   "%lu",    delim, "lu", check_ulong);
 	numbers_list_8(long,		   "%ld",    delim, "ld", check_long);
 	numbers_list_8(long,		   "%ld",    delim, "li", check_long);
 	numbers_list_8(unsigned long,	   "%lx",    delim, "lx", check_ulong);
 	numbers_list_8(unsigned long,	   "0x%lx",  delim, "lx", check_ulong);
 	numbers_list_8(long,		   "0x%lx",  delim, "li", check_long);
+}
 
+static void __init numbers_list_d(const char *delim)
+{
 	numbers_list_8(unsigned int,	   "%u",     delim, "u", check_uint);
 	numbers_list_8(int,		   "%d",     delim, "d", check_int);
 	numbers_list_8(int,		   "%d",     delim, "i", check_int);
 	numbers_list_8(unsigned int,	   "%x",     delim, "x", check_uint);
 	numbers_list_8(unsigned int,	   "0x%x",   delim, "x", check_uint);
 	numbers_list_8(int,		   "0x%x",   delim, "i", check_int);
+}
 
+static void __init numbers_list_h(const char *delim)
+{
 	numbers_list_8(unsigned short,	   "%hu",    delim, "hu", check_ushort);
 	numbers_list_8(short,		   "%hd",    delim, "hd", check_short);
 	numbers_list_8(short,		   "%hd",    delim, "hi", check_short);
 	numbers_list_8(unsigned short,	   "%hx",    delim, "hx", check_ushort);
 	numbers_list_8(unsigned short,	   "0x%hx",  delim, "hx", check_ushort);
 	numbers_list_8(short,		   "0x%hx",  delim, "hi", check_short);
+}
 
+static void __init numbers_list_hh(const char *delim)
+{
 	numbers_list_8(unsigned char,	   "%hhu",   delim, "hhu", check_uchar);
 	numbers_list_8(signed char,	   "%hhd",   delim, "hhd", check_char);
 	numbers_list_8(signed char,	   "%hhd",   delim, "hhi", check_char);
@@ -436,11 +448,16 @@ static void __init numbers_list(const char *delim)
 	numbers_list_8(signed char,	   "0x%hhx", delim, "hhi", check_char);
 }
 
-/*
- * List of numbers separated by delim. Each field width specifier is the
- * maximum possible digits for the given type and base.
- */
-static void __init numbers_list_field_width_typemax(const char *delim)
+static void __init numbers_list(const char *delim)
+{
+	numbers_list_ll(delim);
+	numbers_list_l(delim);
+	numbers_list_d(delim);
+	numbers_list_h(delim);
+	numbers_list_hh(delim);
+}
+
+static void __init numbers_list_field_width_ll(const char *delim)
 {
 	numbers_list_fix_width(unsigned long long, "%llu",   delim, 20, "llu", check_ull);
 	numbers_list_fix_width(long long,	   "%lld",   delim, 20, "lld", check_ll);
@@ -448,7 +465,10 @@ static void __init numbers_list_field_width_typemax(const char *delim)
 	numbers_list_fix_width(unsigned long long, "%llx",   delim, 16, "llx", check_ull);
 	numbers_list_fix_width(unsigned long long, "0x%llx", delim, 18, "llx", check_ull);
 	numbers_list_fix_width(long long,	   "0x%llx", delim, 18, "lli", check_ll);
+}
 
+static void __init numbers_list_field_width_l(const char *delim)
+{
 #if BITS_PER_LONG == 64
 	numbers_list_fix_width(unsigned long,	"%lu",	     delim, 20, "lu", check_ulong);
 	numbers_list_fix_width(long,		"%ld",	     delim, 20, "ld", check_long);
@@ -464,21 +484,30 @@ static void __init numbers_list_field_width_typemax(const char *delim)
 	numbers_list_fix_width(unsigned long,	"0x%lx",     delim, 10, "lx", check_ulong);
 	numbers_list_fix_width(long,		"0x%lx",     delim, 10, "li", check_long);
 #endif
+}
 
+static void __init numbers_list_field_width_d(const char *delim)
+{
 	numbers_list_fix_width(unsigned int,	"%u",	     delim, 10, "u", check_uint);
 	numbers_list_fix_width(int,		"%d",	     delim, 11, "d", check_int);
 	numbers_list_fix_width(int,		"%d",	     delim, 11, "i", check_int);
 	numbers_list_fix_width(unsigned int,	"%x",	     delim, 8,  "x", check_uint);
 	numbers_list_fix_width(unsigned int,	"0x%x",	     delim, 10, "x", check_uint);
 	numbers_list_fix_width(int,		"0x%x",	     delim, 10, "i", check_int);
+}
 
+static void __init numbers_list_field_width_h(const char *delim)
+{
 	numbers_list_fix_width(unsigned short,	"%hu",	     delim, 5, "hu", check_ushort);
 	numbers_list_fix_width(short,		"%hd",	     delim, 6, "hd", check_short);
 	numbers_list_fix_width(short,		"%hd",	     delim, 6, "hi", check_short);
 	numbers_list_fix_width(unsigned short,	"%hx",	     delim, 4, "hx", check_ushort);
 	numbers_list_fix_width(unsigned short,	"0x%hx",     delim, 6, "hx", check_ushort);
 	numbers_list_fix_width(short,		"0x%hx",     delim, 6, "hi", check_short);
+}
 
+static void __init numbers_list_field_width_hh(const char *delim)
+{
 	numbers_list_fix_width(unsigned char,	"%hhu",	     delim, 3, "hhu", check_uchar);
 	numbers_list_fix_width(signed char,	"%hhd",	     delim, 4, "hhd", check_char);
 	numbers_list_fix_width(signed char,	"%hhd",	     delim, 4, "hhi", check_char);
@@ -489,9 +518,18 @@ static void __init numbers_list_field_width_typemax(const char *delim)
 
 /*
  * List of numbers separated by delim. Each field width specifier is the
- * exact length of the corresponding value digits in the string being scanned.
+ * maximum possible digits for the given type and base.
  */
-static void __init numbers_list_field_width_val_width(const char *delim)
+static void __init numbers_list_field_width_typemax(const char *delim)
+{
+	numbers_list_field_width_ll(delim);
+	numbers_list_field_width_l(delim);
+	numbers_list_field_width_d(delim);
+	numbers_list_field_width_h(delim);
+	numbers_list_field_width_hh(delim);
+}
+
+static void __init numbers_list_field_width_val_ll(const char *delim)
 {
 	numbers_list_val_width(unsigned long long, "%llu",   delim, "llu", check_ull);
 	numbers_list_val_width(long long,	   "%lld",   delim, "lld", check_ll);
@@ -499,28 +537,40 @@ static void __init numbers_list_field_width_val_width(const char *delim)
 	numbers_list_val_width(unsigned long long, "%llx",   delim, "llx", check_ull);
 	numbers_list_val_width(unsigned long long, "0x%llx", delim, "llx", check_ull);
 	numbers_list_val_width(long long,	   "0x%llx", delim, "lli", check_ll);
+}
 
+static void __init numbers_list_field_width_val_l(const char *delim)
+{
 	numbers_list_val_width(unsigned long,	"%lu",	     delim, "lu", check_ulong);
 	numbers_list_val_width(long,		"%ld",	     delim, "ld", check_long);
 	numbers_list_val_width(long,		"%ld",	     delim, "li", check_long);
 	numbers_list_val_width(unsigned long,	"%lx",	     delim, "lx", check_ulong);
 	numbers_list_val_width(unsigned long,	"0x%lx",     delim, "lx", check_ulong);
 	numbers_list_val_width(long,		"0x%lx",     delim, "li", check_long);
+}
 
+static void __init numbers_list_field_width_val_d(const char *delim)
+{
 	numbers_list_val_width(unsigned int,	"%u",	     delim, "u", check_uint);
 	numbers_list_val_width(int,		"%d",	     delim, "d", check_int);
 	numbers_list_val_width(int,		"%d",	     delim, "i", check_int);
 	numbers_list_val_width(unsigned int,	"%x",	     delim, "x", check_uint);
 	numbers_list_val_width(unsigned int,	"0x%x",	     delim, "x", check_uint);
 	numbers_list_val_width(int,		"0x%x",	     delim, "i", check_int);
+}
 
+static void __init numbers_list_field_width_val_h(const char *delim)
+{
 	numbers_list_val_width(unsigned short,	"%hu",	     delim, "hu", check_ushort);
 	numbers_list_val_width(short,		"%hd",	     delim, "hd", check_short);
 	numbers_list_val_width(short,		"%hd",	     delim, "hi", check_short);
 	numbers_list_val_width(unsigned short,	"%hx",	     delim, "hx", check_ushort);
 	numbers_list_val_width(unsigned short,	"0x%hx",     delim, "hx", check_ushort);
 	numbers_list_val_width(short,		"0x%hx",     delim, "hi", check_short);
+}
 
+static void __init numbers_list_field_width_val_hh(const char *delim)
+{
 	numbers_list_val_width(unsigned char,	"%hhu",	     delim, "hhu", check_uchar);
 	numbers_list_val_width(signed char,	"%hhd",	     delim, "hhd", check_char);
 	numbers_list_val_width(signed char,	"%hhd",	     delim, "hhi", check_char);
@@ -530,6 +580,19 @@ static void __init numbers_list_field_width_val_width(const char *delim)
 }
 
 /*
+ * List of numbers separated by delim. Each field width specifier is the
+ * exact length of the corresponding value digits in the string being scanned.
+ */
+static void __init numbers_list_field_width_val_width(const char *delim)
+{
+	numbers_list_field_width_val_ll(delim);
+	numbers_list_field_width_val_l(delim);
+	numbers_list_field_width_val_d(delim);
+	numbers_list_field_width_val_h(delim);
+	numbers_list_field_width_val_hh(delim);
+}
+
+/*
  * Slice a continuous string of digits without field delimiters, containing
  * numbers of varying length, using the field width to extract each group
  * of digits. For example the hex values c0,3,bf01,303 would have a
diff --git a/lib/test_sort.c b/lib/test_sort.c
index 52edbe10f2e5..be02e3a098cf 100644
--- a/lib/test_sort.c
+++ b/lib/test_sort.c
@@ -1,4 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only
+
+#include <kunit/test.h>
+
 #include <linux/sort.h>
 #include <linux/slab.h>
 #include <linux/module.h>
@@ -7,18 +10,17 @@
 
 #define TEST_LEN 1000
 
-static int __init cmpint(const void *a, const void *b)
+static int cmpint(const void *a, const void *b)
 {
 	return *(int *)a - *(int *)b;
 }
 
-static int __init test_sort_init(void)
+static void test_sort(struct kunit *test)
 {
-	int *a, i, r = 1, err = -ENOMEM;
+	int *a, i, r = 1;
 
-	a = kmalloc_array(TEST_LEN, sizeof(*a), GFP_KERNEL);
-	if (!a)
-		return err;
+	a = kunit_kmalloc_array(test, TEST_LEN, sizeof(*a), GFP_KERNEL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, a);
 
 	for (i = 0; i < TEST_LEN; i++) {
 		r = (r * 725861) % 6599;
@@ -27,24 +29,20 @@ static int __init test_sort_init(void)
 
 	sort(a, TEST_LEN, sizeof(*a), cmpint, NULL);
 
-	err = -EINVAL;
 	for (i = 0; i < TEST_LEN-1; i++)
-		if (a[i] > a[i+1]) {
-			pr_err("test has failed\n");
-			goto exit;
-		}
-	err = 0;
-	pr_info("test passed\n");
-exit:
-	kfree(a);
-	return err;
+		KUNIT_ASSERT_LE(test, a[i], a[i + 1]);
 }
 
-static void __exit test_sort_exit(void)
-{
-}
+static struct kunit_case sort_test_cases[] = {
+	KUNIT_CASE(test_sort),
+	{}
+};
+
+static struct kunit_suite sort_test_suite = {
+	.name = "lib_sort",
+	.test_cases = sort_test_cases,
+};
 
-module_init(test_sort_init);
-module_exit(test_sort_exit);
+kunit_test_suites(&sort_test_suite);
 
 MODULE_LICENSE("GPL");
diff --git a/lib/vsprintf.c b/lib/vsprintf.c
index 3bcb7be03f93..d7ad44f2c8f5 100644
--- a/lib/vsprintf.c
+++ b/lib/vsprintf.c
@@ -2019,7 +2019,7 @@ static const struct page_flags_fields pff[] = {
 static
 char *format_page_flags(char *buf, char *end, unsigned long flags)
 {
-	unsigned long main_flags = flags & (BIT(NR_PAGEFLAGS) - 1);
+	unsigned long main_flags = flags & PAGEFLAGS_MASK;
 	bool append = false;
 	int i;
 
diff --git a/mm/Kconfig b/mm/Kconfig
index 40a9bfcd5062..d16ba9249bc5 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -96,9 +96,6 @@ config HAVE_FAST_GUP
 	depends on MMU
 	bool
 
-config HOLES_IN_ZONE
-	bool
-
 # Don't discard allocated memory used to track "memory" and "reserved" memblocks
 # after early boot, so it can still be used to test for validity of memory.
 # Also, memblocks are updated with memory hot(un)plug.
@@ -742,10 +739,18 @@ config DEFERRED_STRUCT_PAGE_INIT
 	  lifetime of the system until these kthreads finish the
 	  initialisation.
 
+config PAGE_IDLE_FLAG
+	bool
+	select PAGE_EXTENSION if !64BIT
+	help
+	  This adds PG_idle and PG_young flags to 'struct page'.  PTE Accessed
+	  bit writers can set the state of the bit in the flags so that PTE
+	  Accessed bit readers may avoid disturbance.
+
 config IDLE_PAGE_TRACKING
 	bool "Enable idle page tracking"
 	depends on SYSFS && MMU
-	select PAGE_EXTENSION if !64BIT
+	select PAGE_IDLE_FLAG
 	help
 	  This feature allows to estimate the amount of user pages that have
 	  not been touched during a given period of time. This information can
@@ -889,4 +894,6 @@ config IO_MAPPING
 config SECRETMEM
 	def_bool ARCH_HAS_SET_DIRECT_MAP && !EMBEDDED
 
+source "mm/damon/Kconfig"
+
 endmenu
diff --git a/mm/Makefile b/mm/Makefile
index e3436741d539..fc60a40ce954 100644
--- a/mm/Makefile
+++ b/mm/Makefile
@@ -38,7 +38,7 @@ mmu-y			:= nommu.o
 mmu-$(CONFIG_MMU)	:= highmem.o memory.o mincore.o \
 			   mlock.o mmap.o mmu_gather.o mprotect.o mremap.o \
 			   msync.o page_vma_mapped.o pagewalk.o \
-			   pgtable-generic.o rmap.o vmalloc.o ioremap.o
+			   pgtable-generic.o rmap.o vmalloc.o
 
 
 ifdef CONFIG_CROSS_MEMORY_ATTACH
@@ -118,6 +118,7 @@ obj-$(CONFIG_CMA_SYSFS) += cma_sysfs.o
 obj-$(CONFIG_USERFAULTFD) += userfaultfd.o
 obj-$(CONFIG_IDLE_PAGE_TRACKING) += page_idle.o
 obj-$(CONFIG_DEBUG_PAGE_REF) += debug_page_ref.o
+obj-$(CONFIG_DAMON) += damon/
 obj-$(CONFIG_HARDENED_USERCOPY) += usercopy.o
 obj-$(CONFIG_PERCPU_STATS) += percpu-stats.o
 obj-$(CONFIG_ZONE_DEVICE) += memremap.o
@@ -128,3 +129,4 @@ obj-$(CONFIG_PTDUMP_CORE) += ptdump.o
 obj-$(CONFIG_PAGE_REPORTING) += page_reporting.o
 obj-$(CONFIG_IO_MAPPING) += io-mapping.o
 obj-$(CONFIG_HAVE_BOOTMEM_INFO_NODE) += bootmem_info.o
+obj-$(CONFIG_GENERIC_IOREMAP) += ioremap.o
diff --git a/mm/compaction.c b/mm/compaction.c
index fa9b2b598eab..bfc93da1c2c7 100644
--- a/mm/compaction.c
+++ b/mm/compaction.c
@@ -306,16 +306,14 @@ __reset_isolation_pfn(struct zone *zone, unsigned long pfn, bool check_source,
 	 * is necessary for the block to be a migration source/target.
 	 */
 	do {
-		if (pfn_valid_within(pfn)) {
-			if (check_source && PageLRU(page)) {
-				clear_pageblock_skip(page);
-				return true;
-			}
+		if (check_source && PageLRU(page)) {
+			clear_pageblock_skip(page);
+			return true;
+		}
 
-			if (check_target && PageBuddy(page)) {
-				clear_pageblock_skip(page);
-				return true;
-			}
+		if (check_target && PageBuddy(page)) {
+			clear_pageblock_skip(page);
+			return true;
 		}
 
 		page += (1 << PAGE_ALLOC_COSTLY_ORDER);
@@ -585,8 +583,6 @@ static unsigned long isolate_freepages_block(struct compact_control *cc,
 			break;
 
 		nr_scanned++;
-		if (!pfn_valid_within(blockpfn))
-			goto isolate_fail;
 
 		/*
 		 * For compound pages such as THP and hugetlbfs, we can save
@@ -885,8 +881,6 @@ isolate_migratepages_block(struct compact_control *cc, unsigned long low_pfn,
 			cond_resched();
 		}
 
-		if (!pfn_valid_within(low_pfn))
-			goto isolate_fail;
 		nr_scanned++;
 
 		page = pfn_to_page(low_pfn);
diff --git a/mm/damon/Kconfig b/mm/damon/Kconfig
new file mode 100644
index 000000000000..37024798a97c
--- /dev/null
+++ b/mm/damon/Kconfig
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+menu "Data Access Monitoring"
+
+config DAMON
+	bool "DAMON: Data Access Monitoring Framework"
+	help
+	  This builds a framework that allows kernel subsystems to monitor
+	  access frequency of each memory region. The information can be useful
+	  for performance-centric DRAM level memory management.
+
+	  See https://damonitor.github.io/doc/html/latest-damon/index.html for
+	  more information.
+
+config DAMON_KUNIT_TEST
+	bool "Test for damon" if !KUNIT_ALL_TESTS
+	depends on DAMON && KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the DAMON Kunit test suite.
+
+	  For more information on KUnit and unit tests in general, please refer
+	  to the KUnit documentation.
+
+	  If unsure, say N.
+
+config DAMON_VADDR
+	bool "Data access monitoring primitives for virtual address spaces"
+	depends on DAMON && MMU
+	select PAGE_IDLE_FLAG
+	help
+	  This builds the default data access monitoring primitives for DAMON
+	  that works for virtual address spaces.
+
+config DAMON_VADDR_KUNIT_TEST
+	bool "Test for DAMON primitives" if !KUNIT_ALL_TESTS
+	depends on DAMON_VADDR && KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the DAMON virtual addresses primitives Kunit test suite.
+
+	  For more information on KUnit and unit tests in general, please refer
+	  to the KUnit documentation.
+
+	  If unsure, say N.
+
+config DAMON_DBGFS
+	bool "DAMON debugfs interface"
+	depends on DAMON_VADDR && DEBUG_FS
+	help
+	  This builds the debugfs interface for DAMON.  The user space admins
+	  can use the interface for arbitrary data access monitoring.
+
+	  If unsure, say N.
+
+config DAMON_DBGFS_KUNIT_TEST
+	bool "Test for damon debugfs interface" if !KUNIT_ALL_TESTS
+	depends on DAMON_DBGFS && KUNIT=y
+	default KUNIT_ALL_TESTS
+	help
+	  This builds the DAMON debugfs interface Kunit test suite.
+
+	  For more information on KUnit and unit tests in general, please refer
+	  to the KUnit documentation.
+
+	  If unsure, say N.
+
+endmenu
diff --git a/mm/damon/Makefile b/mm/damon/Makefile
new file mode 100644
index 000000000000..fed4be3bace3
--- /dev/null
+++ b/mm/damon/Makefile
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_DAMON)		:= core.o
+obj-$(CONFIG_DAMON_VADDR)	+= vaddr.o
+obj-$(CONFIG_DAMON_DBGFS)	+= dbgfs.o
diff --git a/mm/damon/core-test.h b/mm/damon/core-test.h
new file mode 100644
index 000000000000..c938a9c34e6c
--- /dev/null
+++ b/mm/damon/core-test.h
@@ -0,0 +1,253 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Data Access Monitor Unit Tests
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates.  All rights reserved.
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#ifdef CONFIG_DAMON_KUNIT_TEST
+
+#ifndef _DAMON_CORE_TEST_H
+#define _DAMON_CORE_TEST_H
+
+#include <kunit/test.h>
+
+static void damon_test_regions(struct kunit *test)
+{
+	struct damon_region *r;
+	struct damon_target *t;
+
+	r = damon_new_region(1, 2);
+	KUNIT_EXPECT_EQ(test, 1ul, r->ar.start);
+	KUNIT_EXPECT_EQ(test, 2ul, r->ar.end);
+	KUNIT_EXPECT_EQ(test, 0u, r->nr_accesses);
+
+	t = damon_new_target(42);
+	KUNIT_EXPECT_EQ(test, 0u, damon_nr_regions(t));
+
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test, 1u, damon_nr_regions(t));
+
+	damon_del_region(r, t);
+	KUNIT_EXPECT_EQ(test, 0u, damon_nr_regions(t));
+
+	damon_free_target(t);
+}
+
+static unsigned int nr_damon_targets(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	unsigned int nr_targets = 0;
+
+	damon_for_each_target(t, ctx)
+		nr_targets++;
+
+	return nr_targets;
+}
+
+static void damon_test_target(struct kunit *test)
+{
+	struct damon_ctx *c = damon_new_ctx();
+	struct damon_target *t;
+
+	t = damon_new_target(42);
+	KUNIT_EXPECT_EQ(test, 42ul, t->id);
+	KUNIT_EXPECT_EQ(test, 0u, nr_damon_targets(c));
+
+	damon_add_target(c, t);
+	KUNIT_EXPECT_EQ(test, 1u, nr_damon_targets(c));
+
+	damon_destroy_target(t);
+	KUNIT_EXPECT_EQ(test, 0u, nr_damon_targets(c));
+
+	damon_destroy_ctx(c);
+}
+
+/*
+ * Test kdamond_reset_aggregated()
+ *
+ * DAMON checks access to each region and aggregates this information as the
+ * access frequency of each region.  In detail, it increases '->nr_accesses' of
+ * regions that an access has confirmed.  'kdamond_reset_aggregated()' flushes
+ * the aggregated information ('->nr_accesses' of each regions) to the result
+ * buffer.  As a result of the flushing, the '->nr_accesses' of regions are
+ * initialized to zero.
+ */
+static void damon_test_aggregate(struct kunit *test)
+{
+	struct damon_ctx *ctx = damon_new_ctx();
+	unsigned long target_ids[] = {1, 2, 3};
+	unsigned long saddr[][3] = {{10, 20, 30}, {5, 42, 49}, {13, 33, 55} };
+	unsigned long eaddr[][3] = {{15, 27, 40}, {31, 45, 55}, {23, 44, 66} };
+	unsigned long accesses[][3] = {{42, 95, 84}, {10, 20, 30}, {0, 1, 2} };
+	struct damon_target *t;
+	struct damon_region *r;
+	int it, ir;
+
+	damon_set_targets(ctx, target_ids, 3);
+
+	it = 0;
+	damon_for_each_target(t, ctx) {
+		for (ir = 0; ir < 3; ir++) {
+			r = damon_new_region(saddr[it][ir], eaddr[it][ir]);
+			r->nr_accesses = accesses[it][ir];
+			damon_add_region(r, t);
+		}
+		it++;
+	}
+	kdamond_reset_aggregated(ctx);
+	it = 0;
+	damon_for_each_target(t, ctx) {
+		ir = 0;
+		/* '->nr_accesses' should be zeroed */
+		damon_for_each_region(r, t) {
+			KUNIT_EXPECT_EQ(test, 0u, r->nr_accesses);
+			ir++;
+		}
+		/* regions should be preserved */
+		KUNIT_EXPECT_EQ(test, 3, ir);
+		it++;
+	}
+	/* targets also should be preserved */
+	KUNIT_EXPECT_EQ(test, 3, it);
+
+	damon_destroy_ctx(ctx);
+}
+
+static void damon_test_split_at(struct kunit *test)
+{
+	struct damon_ctx *c = damon_new_ctx();
+	struct damon_target *t;
+	struct damon_region *r;
+
+	t = damon_new_target(42);
+	r = damon_new_region(0, 100);
+	damon_add_region(r, t);
+	damon_split_region_at(c, t, r, 25);
+	KUNIT_EXPECT_EQ(test, r->ar.start, 0ul);
+	KUNIT_EXPECT_EQ(test, r->ar.end, 25ul);
+
+	r = damon_next_region(r);
+	KUNIT_EXPECT_EQ(test, r->ar.start, 25ul);
+	KUNIT_EXPECT_EQ(test, r->ar.end, 100ul);
+
+	damon_free_target(t);
+	damon_destroy_ctx(c);
+}
+
+static void damon_test_merge_two(struct kunit *test)
+{
+	struct damon_target *t;
+	struct damon_region *r, *r2, *r3;
+	int i;
+
+	t = damon_new_target(42);
+	r = damon_new_region(0, 100);
+	r->nr_accesses = 10;
+	damon_add_region(r, t);
+	r2 = damon_new_region(100, 300);
+	r2->nr_accesses = 20;
+	damon_add_region(r2, t);
+
+	damon_merge_two_regions(t, r, r2);
+	KUNIT_EXPECT_EQ(test, r->ar.start, 0ul);
+	KUNIT_EXPECT_EQ(test, r->ar.end, 300ul);
+	KUNIT_EXPECT_EQ(test, r->nr_accesses, 16u);
+
+	i = 0;
+	damon_for_each_region(r3, t) {
+		KUNIT_EXPECT_PTR_EQ(test, r, r3);
+		i++;
+	}
+	KUNIT_EXPECT_EQ(test, i, 1);
+
+	damon_free_target(t);
+}
+
+static struct damon_region *__nth_region_of(struct damon_target *t, int idx)
+{
+	struct damon_region *r;
+	unsigned int i = 0;
+
+	damon_for_each_region(r, t) {
+		if (i++ == idx)
+			return r;
+	}
+
+	return NULL;
+}
+
+static void damon_test_merge_regions_of(struct kunit *test)
+{
+	struct damon_target *t;
+	struct damon_region *r;
+	unsigned long sa[] = {0, 100, 114, 122, 130, 156, 170, 184};
+	unsigned long ea[] = {100, 112, 122, 130, 156, 170, 184, 230};
+	unsigned int nrs[] = {0, 0, 10, 10, 20, 30, 1, 2};
+
+	unsigned long saddrs[] = {0, 114, 130, 156, 170};
+	unsigned long eaddrs[] = {112, 130, 156, 170, 230};
+	int i;
+
+	t = damon_new_target(42);
+	for (i = 0; i < ARRAY_SIZE(sa); i++) {
+		r = damon_new_region(sa[i], ea[i]);
+		r->nr_accesses = nrs[i];
+		damon_add_region(r, t);
+	}
+
+	damon_merge_regions_of(t, 9, 9999);
+	/* 0-112, 114-130, 130-156, 156-170 */
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 5u);
+	for (i = 0; i < 5; i++) {
+		r = __nth_region_of(t, i);
+		KUNIT_EXPECT_EQ(test, r->ar.start, saddrs[i]);
+		KUNIT_EXPECT_EQ(test, r->ar.end, eaddrs[i]);
+	}
+	damon_free_target(t);
+}
+
+static void damon_test_split_regions_of(struct kunit *test)
+{
+	struct damon_ctx *c = damon_new_ctx();
+	struct damon_target *t;
+	struct damon_region *r;
+
+	t = damon_new_target(42);
+	r = damon_new_region(0, 22);
+	damon_add_region(r, t);
+	damon_split_regions_of(c, t, 2);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 2u);
+	damon_free_target(t);
+
+	t = damon_new_target(42);
+	r = damon_new_region(0, 220);
+	damon_add_region(r, t);
+	damon_split_regions_of(c, t, 4);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 4u);
+	damon_free_target(t);
+	damon_destroy_ctx(c);
+}
+
+static struct kunit_case damon_test_cases[] = {
+	KUNIT_CASE(damon_test_target),
+	KUNIT_CASE(damon_test_regions),
+	KUNIT_CASE(damon_test_aggregate),
+	KUNIT_CASE(damon_test_split_at),
+	KUNIT_CASE(damon_test_merge_two),
+	KUNIT_CASE(damon_test_merge_regions_of),
+	KUNIT_CASE(damon_test_split_regions_of),
+	{},
+};
+
+static struct kunit_suite damon_test_suite = {
+	.name = "damon",
+	.test_cases = damon_test_cases,
+};
+kunit_test_suite(damon_test_suite);
+
+#endif /* _DAMON_CORE_TEST_H */
+
+#endif	/* CONFIG_DAMON_KUNIT_TEST */
diff --git a/mm/damon/core.c b/mm/damon/core.c
new file mode 100644
index 000000000000..30e9211f494a
--- /dev/null
+++ b/mm/damon/core.c
@@ -0,0 +1,720 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Data Access Monitor
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#define pr_fmt(fmt) "damon: " fmt
+
+#include <linux/damon.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/random.h>
+#include <linux/slab.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/damon.h>
+
+#ifdef CONFIG_DAMON_KUNIT_TEST
+#undef DAMON_MIN_REGION
+#define DAMON_MIN_REGION 1
+#endif
+
+/* Get a random number in [l, r) */
+#define damon_rand(l, r) (l + prandom_u32_max(r - l))
+
+static DEFINE_MUTEX(damon_lock);
+static int nr_running_ctxs;
+
+/*
+ * Construct a damon_region struct
+ *
+ * Returns the pointer to the new struct if success, or NULL otherwise
+ */
+struct damon_region *damon_new_region(unsigned long start, unsigned long end)
+{
+	struct damon_region *region;
+
+	region = kmalloc(sizeof(*region), GFP_KERNEL);
+	if (!region)
+		return NULL;
+
+	region->ar.start = start;
+	region->ar.end = end;
+	region->nr_accesses = 0;
+	INIT_LIST_HEAD(&region->list);
+
+	return region;
+}
+
+/*
+ * Add a region between two other regions
+ */
+inline void damon_insert_region(struct damon_region *r,
+		struct damon_region *prev, struct damon_region *next,
+		struct damon_target *t)
+{
+	__list_add(&r->list, &prev->list, &next->list);
+	t->nr_regions++;
+}
+
+void damon_add_region(struct damon_region *r, struct damon_target *t)
+{
+	list_add_tail(&r->list, &t->regions_list);
+	t->nr_regions++;
+}
+
+static void damon_del_region(struct damon_region *r, struct damon_target *t)
+{
+	list_del(&r->list);
+	t->nr_regions--;
+}
+
+static void damon_free_region(struct damon_region *r)
+{
+	kfree(r);
+}
+
+void damon_destroy_region(struct damon_region *r, struct damon_target *t)
+{
+	damon_del_region(r, t);
+	damon_free_region(r);
+}
+
+/*
+ * Construct a damon_target struct
+ *
+ * Returns the pointer to the new struct if success, or NULL otherwise
+ */
+struct damon_target *damon_new_target(unsigned long id)
+{
+	struct damon_target *t;
+
+	t = kmalloc(sizeof(*t), GFP_KERNEL);
+	if (!t)
+		return NULL;
+
+	t->id = id;
+	t->nr_regions = 0;
+	INIT_LIST_HEAD(&t->regions_list);
+
+	return t;
+}
+
+void damon_add_target(struct damon_ctx *ctx, struct damon_target *t)
+{
+	list_add_tail(&t->list, &ctx->adaptive_targets);
+}
+
+static void damon_del_target(struct damon_target *t)
+{
+	list_del(&t->list);
+}
+
+void damon_free_target(struct damon_target *t)
+{
+	struct damon_region *r, *next;
+
+	damon_for_each_region_safe(r, next, t)
+		damon_free_region(r);
+	kfree(t);
+}
+
+void damon_destroy_target(struct damon_target *t)
+{
+	damon_del_target(t);
+	damon_free_target(t);
+}
+
+unsigned int damon_nr_regions(struct damon_target *t)
+{
+	return t->nr_regions;
+}
+
+struct damon_ctx *damon_new_ctx(void)
+{
+	struct damon_ctx *ctx;
+
+	ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return NULL;
+
+	ctx->sample_interval = 5 * 1000;
+	ctx->aggr_interval = 100 * 1000;
+	ctx->primitive_update_interval = 60 * 1000 * 1000;
+
+	ktime_get_coarse_ts64(&ctx->last_aggregation);
+	ctx->last_primitive_update = ctx->last_aggregation;
+
+	mutex_init(&ctx->kdamond_lock);
+
+	ctx->min_nr_regions = 10;
+	ctx->max_nr_regions = 1000;
+
+	INIT_LIST_HEAD(&ctx->adaptive_targets);
+
+	return ctx;
+}
+
+static void damon_destroy_targets(struct damon_ctx *ctx)
+{
+	struct damon_target *t, *next_t;
+
+	if (ctx->primitive.cleanup) {
+		ctx->primitive.cleanup(ctx);
+		return;
+	}
+
+	damon_for_each_target_safe(t, next_t, ctx)
+		damon_destroy_target(t);
+}
+
+void damon_destroy_ctx(struct damon_ctx *ctx)
+{
+	damon_destroy_targets(ctx);
+	kfree(ctx);
+}
+
+/**
+ * damon_set_targets() - Set monitoring targets.
+ * @ctx:	monitoring context
+ * @ids:	array of target ids
+ * @nr_ids:	number of entries in @ids
+ *
+ * This function should not be called while the kdamond is running.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int damon_set_targets(struct damon_ctx *ctx,
+		      unsigned long *ids, ssize_t nr_ids)
+{
+	ssize_t i;
+	struct damon_target *t, *next;
+
+	damon_destroy_targets(ctx);
+
+	for (i = 0; i < nr_ids; i++) {
+		t = damon_new_target(ids[i]);
+		if (!t) {
+			pr_err("Failed to alloc damon_target\n");
+			/* The caller should do cleanup of the ids itself */
+			damon_for_each_target_safe(t, next, ctx)
+				damon_destroy_target(t);
+			return -ENOMEM;
+		}
+		damon_add_target(ctx, t);
+	}
+
+	return 0;
+}
+
+/**
+ * damon_set_attrs() - Set attributes for the monitoring.
+ * @ctx:		monitoring context
+ * @sample_int:		time interval between samplings
+ * @aggr_int:		time interval between aggregations
+ * @primitive_upd_int:	time interval between monitoring primitive updates
+ * @min_nr_reg:		minimal number of regions
+ * @max_nr_reg:		maximum number of regions
+ *
+ * This function should not be called while the kdamond is running.
+ * Every time interval is in micro-seconds.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int damon_set_attrs(struct damon_ctx *ctx, unsigned long sample_int,
+		    unsigned long aggr_int, unsigned long primitive_upd_int,
+		    unsigned long min_nr_reg, unsigned long max_nr_reg)
+{
+	if (min_nr_reg < 3) {
+		pr_err("min_nr_regions (%lu) must be at least 3\n",
+				min_nr_reg);
+		return -EINVAL;
+	}
+	if (min_nr_reg > max_nr_reg) {
+		pr_err("invalid nr_regions.  min (%lu) > max (%lu)\n",
+				min_nr_reg, max_nr_reg);
+		return -EINVAL;
+	}
+
+	ctx->sample_interval = sample_int;
+	ctx->aggr_interval = aggr_int;
+	ctx->primitive_update_interval = primitive_upd_int;
+	ctx->min_nr_regions = min_nr_reg;
+	ctx->max_nr_regions = max_nr_reg;
+
+	return 0;
+}
+
+/**
+ * damon_nr_running_ctxs() - Return number of currently running contexts.
+ */
+int damon_nr_running_ctxs(void)
+{
+	int nr_ctxs;
+
+	mutex_lock(&damon_lock);
+	nr_ctxs = nr_running_ctxs;
+	mutex_unlock(&damon_lock);
+
+	return nr_ctxs;
+}
+
+/* Returns the size upper limit for each monitoring region */
+static unsigned long damon_region_sz_limit(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	struct damon_region *r;
+	unsigned long sz = 0;
+
+	damon_for_each_target(t, ctx) {
+		damon_for_each_region(r, t)
+			sz += r->ar.end - r->ar.start;
+	}
+
+	if (ctx->min_nr_regions)
+		sz /= ctx->min_nr_regions;
+	if (sz < DAMON_MIN_REGION)
+		sz = DAMON_MIN_REGION;
+
+	return sz;
+}
+
+static bool damon_kdamond_running(struct damon_ctx *ctx)
+{
+	bool running;
+
+	mutex_lock(&ctx->kdamond_lock);
+	running = ctx->kdamond != NULL;
+	mutex_unlock(&ctx->kdamond_lock);
+
+	return running;
+}
+
+static int kdamond_fn(void *data);
+
+/*
+ * __damon_start() - Starts monitoring with given context.
+ * @ctx:	monitoring context
+ *
+ * This function should be called while damon_lock is hold.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int __damon_start(struct damon_ctx *ctx)
+{
+	int err = -EBUSY;
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (!ctx->kdamond) {
+		err = 0;
+		ctx->kdamond_stop = false;
+		ctx->kdamond = kthread_run(kdamond_fn, ctx, "kdamond.%d",
+				nr_running_ctxs);
+		if (IS_ERR(ctx->kdamond)) {
+			err = PTR_ERR(ctx->kdamond);
+			ctx->kdamond = 0;
+		}
+	}
+	mutex_unlock(&ctx->kdamond_lock);
+
+	return err;
+}
+
+/**
+ * damon_start() - Starts the monitorings for a given group of contexts.
+ * @ctxs:	an array of the pointers for contexts to start monitoring
+ * @nr_ctxs:	size of @ctxs
+ *
+ * This function starts a group of monitoring threads for a group of monitoring
+ * contexts.  One thread per each context is created and run in parallel.  The
+ * caller should handle synchronization between the threads by itself.  If a
+ * group of threads that created by other 'damon_start()' call is currently
+ * running, this function does nothing but returns -EBUSY.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int damon_start(struct damon_ctx **ctxs, int nr_ctxs)
+{
+	int i;
+	int err = 0;
+
+	mutex_lock(&damon_lock);
+	if (nr_running_ctxs) {
+		mutex_unlock(&damon_lock);
+		return -EBUSY;
+	}
+
+	for (i = 0; i < nr_ctxs; i++) {
+		err = __damon_start(ctxs[i]);
+		if (err)
+			break;
+		nr_running_ctxs++;
+	}
+	mutex_unlock(&damon_lock);
+
+	return err;
+}
+
+/*
+ * __damon_stop() - Stops monitoring of given context.
+ * @ctx:	monitoring context
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+static int __damon_stop(struct damon_ctx *ctx)
+{
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond) {
+		ctx->kdamond_stop = true;
+		mutex_unlock(&ctx->kdamond_lock);
+		while (damon_kdamond_running(ctx))
+			usleep_range(ctx->sample_interval,
+					ctx->sample_interval * 2);
+		return 0;
+	}
+	mutex_unlock(&ctx->kdamond_lock);
+
+	return -EPERM;
+}
+
+/**
+ * damon_stop() - Stops the monitorings for a given group of contexts.
+ * @ctxs:	an array of the pointers for contexts to stop monitoring
+ * @nr_ctxs:	size of @ctxs
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int damon_stop(struct damon_ctx **ctxs, int nr_ctxs)
+{
+	int i, err = 0;
+
+	for (i = 0; i < nr_ctxs; i++) {
+		/* nr_running_ctxs is decremented in kdamond_fn */
+		err = __damon_stop(ctxs[i]);
+		if (err)
+			return err;
+	}
+
+	return err;
+}
+
+/*
+ * damon_check_reset_time_interval() - Check if a time interval is elapsed.
+ * @baseline:	the time to check whether the interval has elapsed since
+ * @interval:	the time interval (microseconds)
+ *
+ * See whether the given time interval has passed since the given baseline
+ * time.  If so, it also updates the baseline to current time for next check.
+ *
+ * Return:	true if the time interval has passed, or false otherwise.
+ */
+static bool damon_check_reset_time_interval(struct timespec64 *baseline,
+		unsigned long interval)
+{
+	struct timespec64 now;
+
+	ktime_get_coarse_ts64(&now);
+	if ((timespec64_to_ns(&now) - timespec64_to_ns(baseline)) <
+			interval * 1000)
+		return false;
+	*baseline = now;
+	return true;
+}
+
+/*
+ * Check whether it is time to flush the aggregated information
+ */
+static bool kdamond_aggregate_interval_passed(struct damon_ctx *ctx)
+{
+	return damon_check_reset_time_interval(&ctx->last_aggregation,
+			ctx->aggr_interval);
+}
+
+/*
+ * Reset the aggregated monitoring results ('nr_accesses' of each region).
+ */
+static void kdamond_reset_aggregated(struct damon_ctx *c)
+{
+	struct damon_target *t;
+
+	damon_for_each_target(t, c) {
+		struct damon_region *r;
+
+		damon_for_each_region(r, t) {
+			trace_damon_aggregated(t, r, damon_nr_regions(t));
+			r->nr_accesses = 0;
+		}
+	}
+}
+
+#define sz_damon_region(r) (r->ar.end - r->ar.start)
+
+/*
+ * Merge two adjacent regions into one region
+ */
+static void damon_merge_two_regions(struct damon_target *t,
+		struct damon_region *l, struct damon_region *r)
+{
+	unsigned long sz_l = sz_damon_region(l), sz_r = sz_damon_region(r);
+
+	l->nr_accesses = (l->nr_accesses * sz_l + r->nr_accesses * sz_r) /
+			(sz_l + sz_r);
+	l->ar.end = r->ar.end;
+	damon_destroy_region(r, t);
+}
+
+#define diff_of(a, b) (a > b ? a - b : b - a)
+
+/*
+ * Merge adjacent regions having similar access frequencies
+ *
+ * t		target affected by this merge operation
+ * thres	'->nr_accesses' diff threshold for the merge
+ * sz_limit	size upper limit of each region
+ */
+static void damon_merge_regions_of(struct damon_target *t, unsigned int thres,
+				   unsigned long sz_limit)
+{
+	struct damon_region *r, *prev = NULL, *next;
+
+	damon_for_each_region_safe(r, next, t) {
+		if (prev && prev->ar.end == r->ar.start &&
+		    diff_of(prev->nr_accesses, r->nr_accesses) <= thres &&
+		    sz_damon_region(prev) + sz_damon_region(r) <= sz_limit)
+			damon_merge_two_regions(t, prev, r);
+		else
+			prev = r;
+	}
+}
+
+/*
+ * Merge adjacent regions having similar access frequencies
+ *
+ * threshold	'->nr_accesses' diff threshold for the merge
+ * sz_limit	size upper limit of each region
+ *
+ * This function merges monitoring target regions which are adjacent and their
+ * access frequencies are similar.  This is for minimizing the monitoring
+ * overhead under the dynamically changeable access pattern.  If a merge was
+ * unnecessarily made, later 'kdamond_split_regions()' will revert it.
+ */
+static void kdamond_merge_regions(struct damon_ctx *c, unsigned int threshold,
+				  unsigned long sz_limit)
+{
+	struct damon_target *t;
+
+	damon_for_each_target(t, c)
+		damon_merge_regions_of(t, threshold, sz_limit);
+}
+
+/*
+ * Split a region in two
+ *
+ * r		the region to be split
+ * sz_r		size of the first sub-region that will be made
+ */
+static void damon_split_region_at(struct damon_ctx *ctx,
+		struct damon_target *t, struct damon_region *r,
+		unsigned long sz_r)
+{
+	struct damon_region *new;
+
+	new = damon_new_region(r->ar.start + sz_r, r->ar.end);
+	if (!new)
+		return;
+
+	r->ar.end = new->ar.start;
+
+	damon_insert_region(new, r, damon_next_region(r), t);
+}
+
+/* Split every region in the given target into 'nr_subs' regions */
+static void damon_split_regions_of(struct damon_ctx *ctx,
+				     struct damon_target *t, int nr_subs)
+{
+	struct damon_region *r, *next;
+	unsigned long sz_region, sz_sub = 0;
+	int i;
+
+	damon_for_each_region_safe(r, next, t) {
+		sz_region = r->ar.end - r->ar.start;
+
+		for (i = 0; i < nr_subs - 1 &&
+				sz_region > 2 * DAMON_MIN_REGION; i++) {
+			/*
+			 * Randomly select size of left sub-region to be at
+			 * least 10 percent and at most 90% of original region
+			 */
+			sz_sub = ALIGN_DOWN(damon_rand(1, 10) *
+					sz_region / 10, DAMON_MIN_REGION);
+			/* Do not allow blank region */
+			if (sz_sub == 0 || sz_sub >= sz_region)
+				continue;
+
+			damon_split_region_at(ctx, t, r, sz_sub);
+			sz_region = sz_sub;
+		}
+	}
+}
+
+/*
+ * Split every target region into randomly-sized small regions
+ *
+ * This function splits every target region into random-sized small regions if
+ * current total number of the regions is equal or smaller than half of the
+ * user-specified maximum number of regions.  This is for maximizing the
+ * monitoring accuracy under the dynamically changeable access patterns.  If a
+ * split was unnecessarily made, later 'kdamond_merge_regions()' will revert
+ * it.
+ */
+static void kdamond_split_regions(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	unsigned int nr_regions = 0;
+	static unsigned int last_nr_regions;
+	int nr_subregions = 2;
+
+	damon_for_each_target(t, ctx)
+		nr_regions += damon_nr_regions(t);
+
+	if (nr_regions > ctx->max_nr_regions / 2)
+		return;
+
+	/* Maybe the middle of the region has different access frequency */
+	if (last_nr_regions == nr_regions &&
+			nr_regions < ctx->max_nr_regions / 3)
+		nr_subregions = 3;
+
+	damon_for_each_target(t, ctx)
+		damon_split_regions_of(ctx, t, nr_subregions);
+
+	last_nr_regions = nr_regions;
+}
+
+/*
+ * Check whether it is time to check and apply the target monitoring regions
+ *
+ * Returns true if it is.
+ */
+static bool kdamond_need_update_primitive(struct damon_ctx *ctx)
+{
+	return damon_check_reset_time_interval(&ctx->last_primitive_update,
+			ctx->primitive_update_interval);
+}
+
+/*
+ * Check whether current monitoring should be stopped
+ *
+ * The monitoring is stopped when either the user requested to stop, or all
+ * monitoring targets are invalid.
+ *
+ * Returns true if need to stop current monitoring.
+ */
+static bool kdamond_need_stop(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	bool stop;
+
+	mutex_lock(&ctx->kdamond_lock);
+	stop = ctx->kdamond_stop;
+	mutex_unlock(&ctx->kdamond_lock);
+	if (stop)
+		return true;
+
+	if (!ctx->primitive.target_valid)
+		return false;
+
+	damon_for_each_target(t, ctx) {
+		if (ctx->primitive.target_valid(t))
+			return false;
+	}
+
+	return true;
+}
+
+static void set_kdamond_stop(struct damon_ctx *ctx)
+{
+	mutex_lock(&ctx->kdamond_lock);
+	ctx->kdamond_stop = true;
+	mutex_unlock(&ctx->kdamond_lock);
+}
+
+/*
+ * The monitoring daemon that runs as a kernel thread
+ */
+static int kdamond_fn(void *data)
+{
+	struct damon_ctx *ctx = (struct damon_ctx *)data;
+	struct damon_target *t;
+	struct damon_region *r, *next;
+	unsigned int max_nr_accesses = 0;
+	unsigned long sz_limit = 0;
+
+	mutex_lock(&ctx->kdamond_lock);
+	pr_info("kdamond (%d) starts\n", ctx->kdamond->pid);
+	mutex_unlock(&ctx->kdamond_lock);
+
+	if (ctx->primitive.init)
+		ctx->primitive.init(ctx);
+	if (ctx->callback.before_start && ctx->callback.before_start(ctx))
+		set_kdamond_stop(ctx);
+
+	sz_limit = damon_region_sz_limit(ctx);
+
+	while (!kdamond_need_stop(ctx)) {
+		if (ctx->primitive.prepare_access_checks)
+			ctx->primitive.prepare_access_checks(ctx);
+		if (ctx->callback.after_sampling &&
+				ctx->callback.after_sampling(ctx))
+			set_kdamond_stop(ctx);
+
+		usleep_range(ctx->sample_interval, ctx->sample_interval + 1);
+
+		if (ctx->primitive.check_accesses)
+			max_nr_accesses = ctx->primitive.check_accesses(ctx);
+
+		if (kdamond_aggregate_interval_passed(ctx)) {
+			kdamond_merge_regions(ctx,
+					max_nr_accesses / 10,
+					sz_limit);
+			if (ctx->callback.after_aggregation &&
+					ctx->callback.after_aggregation(ctx))
+				set_kdamond_stop(ctx);
+			kdamond_reset_aggregated(ctx);
+			kdamond_split_regions(ctx);
+			if (ctx->primitive.reset_aggregated)
+				ctx->primitive.reset_aggregated(ctx);
+		}
+
+		if (kdamond_need_update_primitive(ctx)) {
+			if (ctx->primitive.update)
+				ctx->primitive.update(ctx);
+			sz_limit = damon_region_sz_limit(ctx);
+		}
+	}
+	damon_for_each_target(t, ctx) {
+		damon_for_each_region_safe(r, next, t)
+			damon_destroy_region(r, t);
+	}
+
+	if (ctx->callback.before_terminate &&
+			ctx->callback.before_terminate(ctx))
+		set_kdamond_stop(ctx);
+	if (ctx->primitive.cleanup)
+		ctx->primitive.cleanup(ctx);
+
+	pr_debug("kdamond (%d) finishes\n", ctx->kdamond->pid);
+	mutex_lock(&ctx->kdamond_lock);
+	ctx->kdamond = NULL;
+	mutex_unlock(&ctx->kdamond_lock);
+
+	mutex_lock(&damon_lock);
+	nr_running_ctxs--;
+	mutex_unlock(&damon_lock);
+
+	do_exit(0);
+}
+
+#include "core-test.h"
diff --git a/mm/damon/dbgfs-test.h b/mm/damon/dbgfs-test.h
new file mode 100644
index 000000000000..930e83bceef0
--- /dev/null
+++ b/mm/damon/dbgfs-test.h
@@ -0,0 +1,126 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * DAMON Debugfs Interface Unit Tests
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#ifdef CONFIG_DAMON_DBGFS_KUNIT_TEST
+
+#ifndef _DAMON_DBGFS_TEST_H
+#define _DAMON_DBGFS_TEST_H
+
+#include <kunit/test.h>
+
+static void damon_dbgfs_test_str_to_target_ids(struct kunit *test)
+{
+	char *question;
+	unsigned long *answers;
+	unsigned long expected[] = {12, 35, 46};
+	ssize_t nr_integers = 0, i;
+
+	question = "123";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers);
+	KUNIT_EXPECT_EQ(test, 123ul, answers[0]);
+	kfree(answers);
+
+	question = "123abc";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)1, nr_integers);
+	KUNIT_EXPECT_EQ(test, 123ul, answers[0]);
+	kfree(answers);
+
+	question = "a123";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers);
+	kfree(answers);
+
+	question = "12 35";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers);
+	for (i = 0; i < nr_integers; i++)
+		KUNIT_EXPECT_EQ(test, expected[i], answers[i]);
+	kfree(answers);
+
+	question = "12 35 46";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)3, nr_integers);
+	for (i = 0; i < nr_integers; i++)
+		KUNIT_EXPECT_EQ(test, expected[i], answers[i]);
+	kfree(answers);
+
+	question = "12 35 abc 46";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)2, nr_integers);
+	for (i = 0; i < 2; i++)
+		KUNIT_EXPECT_EQ(test, expected[i], answers[i]);
+	kfree(answers);
+
+	question = "";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers);
+	kfree(answers);
+
+	question = "\n";
+	answers = str_to_target_ids(question, strnlen(question, 128),
+			&nr_integers);
+	KUNIT_EXPECT_EQ(test, (ssize_t)0, nr_integers);
+	kfree(answers);
+}
+
+static void damon_dbgfs_test_set_targets(struct kunit *test)
+{
+	struct damon_ctx *ctx = dbgfs_new_ctx();
+	unsigned long ids[] = {1, 2, 3};
+	char buf[64];
+
+	/* Make DAMON consider target id as plain number */
+	ctx->primitive.target_valid = NULL;
+	ctx->primitive.cleanup = NULL;
+
+	damon_set_targets(ctx, ids, 3);
+	sprint_target_ids(ctx, buf, 64);
+	KUNIT_EXPECT_STREQ(test, (char *)buf, "1 2 3\n");
+
+	damon_set_targets(ctx, NULL, 0);
+	sprint_target_ids(ctx, buf, 64);
+	KUNIT_EXPECT_STREQ(test, (char *)buf, "\n");
+
+	damon_set_targets(ctx, (unsigned long []){1, 2}, 2);
+	sprint_target_ids(ctx, buf, 64);
+	KUNIT_EXPECT_STREQ(test, (char *)buf, "1 2\n");
+
+	damon_set_targets(ctx, (unsigned long []){2}, 1);
+	sprint_target_ids(ctx, buf, 64);
+	KUNIT_EXPECT_STREQ(test, (char *)buf, "2\n");
+
+	damon_set_targets(ctx, NULL, 0);
+	sprint_target_ids(ctx, buf, 64);
+	KUNIT_EXPECT_STREQ(test, (char *)buf, "\n");
+
+	dbgfs_destroy_ctx(ctx);
+}
+
+static struct kunit_case damon_test_cases[] = {
+	KUNIT_CASE(damon_dbgfs_test_str_to_target_ids),
+	KUNIT_CASE(damon_dbgfs_test_set_targets),
+	{},
+};
+
+static struct kunit_suite damon_test_suite = {
+	.name = "damon-dbgfs",
+	.test_cases = damon_test_cases,
+};
+kunit_test_suite(damon_test_suite);
+
+#endif /* _DAMON_TEST_H */
+
+#endif	/* CONFIG_DAMON_KUNIT_TEST */
diff --git a/mm/damon/dbgfs.c b/mm/damon/dbgfs.c
new file mode 100644
index 000000000000..faee070977d8
--- /dev/null
+++ b/mm/damon/dbgfs.c
@@ -0,0 +1,623 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DAMON Debugfs Interface
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#define pr_fmt(fmt) "damon-dbgfs: " fmt
+
+#include <linux/damon.h>
+#include <linux/debugfs.h>
+#include <linux/file.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/page_idle.h>
+#include <linux/slab.h>
+
+static struct damon_ctx **dbgfs_ctxs;
+static int dbgfs_nr_ctxs;
+static struct dentry **dbgfs_dirs;
+static DEFINE_MUTEX(damon_dbgfs_lock);
+
+/*
+ * Returns non-empty string on success, negative error code otherwise.
+ */
+static char *user_input_str(const char __user *buf, size_t count, loff_t *ppos)
+{
+	char *kbuf;
+	ssize_t ret;
+
+	/* We do not accept continuous write */
+	if (*ppos)
+		return ERR_PTR(-EINVAL);
+
+	kbuf = kmalloc(count + 1, GFP_KERNEL);
+	if (!kbuf)
+		return ERR_PTR(-ENOMEM);
+
+	ret = simple_write_to_buffer(kbuf, count + 1, ppos, buf, count);
+	if (ret != count) {
+		kfree(kbuf);
+		return ERR_PTR(-EIO);
+	}
+	kbuf[ret] = '\0';
+
+	return kbuf;
+}
+
+static ssize_t dbgfs_attrs_read(struct file *file,
+		char __user *buf, size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = file->private_data;
+	char kbuf[128];
+	int ret;
+
+	mutex_lock(&ctx->kdamond_lock);
+	ret = scnprintf(kbuf, ARRAY_SIZE(kbuf), "%lu %lu %lu %lu %lu\n",
+			ctx->sample_interval, ctx->aggr_interval,
+			ctx->primitive_update_interval, ctx->min_nr_regions,
+			ctx->max_nr_regions);
+	mutex_unlock(&ctx->kdamond_lock);
+
+	return simple_read_from_buffer(buf, count, ppos, kbuf, ret);
+}
+
+static ssize_t dbgfs_attrs_write(struct file *file,
+		const char __user *buf, size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = file->private_data;
+	unsigned long s, a, r, minr, maxr;
+	char *kbuf;
+	ssize_t ret = count;
+	int err;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	if (sscanf(kbuf, "%lu %lu %lu %lu %lu",
+				&s, &a, &r, &minr, &maxr) != 5) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond) {
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	err = damon_set_attrs(ctx, s, a, r, minr, maxr);
+	if (err)
+		ret = err;
+unlock_out:
+	mutex_unlock(&ctx->kdamond_lock);
+out:
+	kfree(kbuf);
+	return ret;
+}
+
+static inline bool targetid_is_pid(const struct damon_ctx *ctx)
+{
+	return ctx->primitive.target_valid == damon_va_target_valid;
+}
+
+static ssize_t sprint_target_ids(struct damon_ctx *ctx, char *buf, ssize_t len)
+{
+	struct damon_target *t;
+	unsigned long id;
+	int written = 0;
+	int rc;
+
+	damon_for_each_target(t, ctx) {
+		id = t->id;
+		if (targetid_is_pid(ctx))
+			/* Show pid numbers to debugfs users */
+			id = (unsigned long)pid_vnr((struct pid *)id);
+
+		rc = scnprintf(&buf[written], len - written, "%lu ", id);
+		if (!rc)
+			return -ENOMEM;
+		written += rc;
+	}
+	if (written)
+		written -= 1;
+	written += scnprintf(&buf[written], len - written, "\n");
+	return written;
+}
+
+static ssize_t dbgfs_target_ids_read(struct file *file,
+		char __user *buf, size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = file->private_data;
+	ssize_t len;
+	char ids_buf[320];
+
+	mutex_lock(&ctx->kdamond_lock);
+	len = sprint_target_ids(ctx, ids_buf, 320);
+	mutex_unlock(&ctx->kdamond_lock);
+	if (len < 0)
+		return len;
+
+	return simple_read_from_buffer(buf, count, ppos, ids_buf, len);
+}
+
+/*
+ * Converts a string into an array of unsigned long integers
+ *
+ * Returns an array of unsigned long integers if the conversion success, or
+ * NULL otherwise.
+ */
+static unsigned long *str_to_target_ids(const char *str, ssize_t len,
+					ssize_t *nr_ids)
+{
+	unsigned long *ids;
+	const int max_nr_ids = 32;
+	unsigned long id;
+	int pos = 0, parsed, ret;
+
+	*nr_ids = 0;
+	ids = kmalloc_array(max_nr_ids, sizeof(id), GFP_KERNEL);
+	if (!ids)
+		return NULL;
+	while (*nr_ids < max_nr_ids && pos < len) {
+		ret = sscanf(&str[pos], "%lu%n", &id, &parsed);
+		pos += parsed;
+		if (ret != 1)
+			break;
+		ids[*nr_ids] = id;
+		*nr_ids += 1;
+	}
+
+	return ids;
+}
+
+static void dbgfs_put_pids(unsigned long *ids, int nr_ids)
+{
+	int i;
+
+	for (i = 0; i < nr_ids; i++)
+		put_pid((struct pid *)ids[i]);
+}
+
+static ssize_t dbgfs_target_ids_write(struct file *file,
+		const char __user *buf, size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = file->private_data;
+	char *kbuf, *nrs;
+	unsigned long *targets;
+	ssize_t nr_targets;
+	ssize_t ret = count;
+	int i;
+	int err;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	nrs = kbuf;
+
+	targets = str_to_target_ids(nrs, ret, &nr_targets);
+	if (!targets) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	if (targetid_is_pid(ctx)) {
+		for (i = 0; i < nr_targets; i++) {
+			targets[i] = (unsigned long)find_get_pid(
+					(int)targets[i]);
+			if (!targets[i]) {
+				dbgfs_put_pids(targets, i);
+				ret = -EINVAL;
+				goto free_targets_out;
+			}
+		}
+	}
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond) {
+		if (targetid_is_pid(ctx))
+			dbgfs_put_pids(targets, nr_targets);
+		ret = -EBUSY;
+		goto unlock_out;
+	}
+
+	err = damon_set_targets(ctx, targets, nr_targets);
+	if (err) {
+		if (targetid_is_pid(ctx))
+			dbgfs_put_pids(targets, nr_targets);
+		ret = err;
+	}
+
+unlock_out:
+	mutex_unlock(&ctx->kdamond_lock);
+free_targets_out:
+	kfree(targets);
+out:
+	kfree(kbuf);
+	return ret;
+}
+
+static ssize_t dbgfs_kdamond_pid_read(struct file *file,
+		char __user *buf, size_t count, loff_t *ppos)
+{
+	struct damon_ctx *ctx = file->private_data;
+	char *kbuf;
+	ssize_t len;
+
+	kbuf = kmalloc(count, GFP_KERNEL);
+	if (!kbuf)
+		return -ENOMEM;
+
+	mutex_lock(&ctx->kdamond_lock);
+	if (ctx->kdamond)
+		len = scnprintf(kbuf, count, "%d\n", ctx->kdamond->pid);
+	else
+		len = scnprintf(kbuf, count, "none\n");
+	mutex_unlock(&ctx->kdamond_lock);
+	if (!len)
+		goto out;
+	len = simple_read_from_buffer(buf, count, ppos, kbuf, len);
+
+out:
+	kfree(kbuf);
+	return len;
+}
+
+static int damon_dbgfs_open(struct inode *inode, struct file *file)
+{
+	file->private_data = inode->i_private;
+
+	return nonseekable_open(inode, file);
+}
+
+static const struct file_operations attrs_fops = {
+	.open = damon_dbgfs_open,
+	.read = dbgfs_attrs_read,
+	.write = dbgfs_attrs_write,
+};
+
+static const struct file_operations target_ids_fops = {
+	.open = damon_dbgfs_open,
+	.read = dbgfs_target_ids_read,
+	.write = dbgfs_target_ids_write,
+};
+
+static const struct file_operations kdamond_pid_fops = {
+	.open = damon_dbgfs_open,
+	.read = dbgfs_kdamond_pid_read,
+};
+
+static void dbgfs_fill_ctx_dir(struct dentry *dir, struct damon_ctx *ctx)
+{
+	const char * const file_names[] = {"attrs", "target_ids",
+		"kdamond_pid"};
+	const struct file_operations *fops[] = {&attrs_fops, &target_ids_fops,
+		&kdamond_pid_fops};
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(file_names); i++)
+		debugfs_create_file(file_names[i], 0600, dir, ctx, fops[i]);
+}
+
+static int dbgfs_before_terminate(struct damon_ctx *ctx)
+{
+	struct damon_target *t, *next;
+
+	if (!targetid_is_pid(ctx))
+		return 0;
+
+	damon_for_each_target_safe(t, next, ctx) {
+		put_pid((struct pid *)t->id);
+		damon_destroy_target(t);
+	}
+	return 0;
+}
+
+static struct damon_ctx *dbgfs_new_ctx(void)
+{
+	struct damon_ctx *ctx;
+
+	ctx = damon_new_ctx();
+	if (!ctx)
+		return NULL;
+
+	damon_va_set_primitives(ctx);
+	ctx->callback.before_terminate = dbgfs_before_terminate;
+	return ctx;
+}
+
+static void dbgfs_destroy_ctx(struct damon_ctx *ctx)
+{
+	damon_destroy_ctx(ctx);
+}
+
+/*
+ * Make a context of @name and create a debugfs directory for it.
+ *
+ * This function should be called while holding damon_dbgfs_lock.
+ *
+ * Returns 0 on success, negative error code otherwise.
+ */
+static int dbgfs_mk_context(char *name)
+{
+	struct dentry *root, **new_dirs, *new_dir;
+	struct damon_ctx **new_ctxs, *new_ctx;
+
+	if (damon_nr_running_ctxs())
+		return -EBUSY;
+
+	new_ctxs = krealloc(dbgfs_ctxs, sizeof(*dbgfs_ctxs) *
+			(dbgfs_nr_ctxs + 1), GFP_KERNEL);
+	if (!new_ctxs)
+		return -ENOMEM;
+	dbgfs_ctxs = new_ctxs;
+
+	new_dirs = krealloc(dbgfs_dirs, sizeof(*dbgfs_dirs) *
+			(dbgfs_nr_ctxs + 1), GFP_KERNEL);
+	if (!new_dirs)
+		return -ENOMEM;
+	dbgfs_dirs = new_dirs;
+
+	root = dbgfs_dirs[0];
+	if (!root)
+		return -ENOENT;
+
+	new_dir = debugfs_create_dir(name, root);
+	dbgfs_dirs[dbgfs_nr_ctxs] = new_dir;
+
+	new_ctx = dbgfs_new_ctx();
+	if (!new_ctx) {
+		debugfs_remove(new_dir);
+		dbgfs_dirs[dbgfs_nr_ctxs] = NULL;
+		return -ENOMEM;
+	}
+
+	dbgfs_ctxs[dbgfs_nr_ctxs] = new_ctx;
+	dbgfs_fill_ctx_dir(dbgfs_dirs[dbgfs_nr_ctxs],
+			dbgfs_ctxs[dbgfs_nr_ctxs]);
+	dbgfs_nr_ctxs++;
+
+	return 0;
+}
+
+static ssize_t dbgfs_mk_context_write(struct file *file,
+		const char __user *buf, size_t count, loff_t *ppos)
+{
+	char *kbuf;
+	char *ctx_name;
+	ssize_t ret = count;
+	int err;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+	ctx_name = kmalloc(count + 1, GFP_KERNEL);
+	if (!ctx_name) {
+		kfree(kbuf);
+		return -ENOMEM;
+	}
+
+	/* Trim white space */
+	if (sscanf(kbuf, "%s", ctx_name) != 1) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mutex_lock(&damon_dbgfs_lock);
+	err = dbgfs_mk_context(ctx_name);
+	if (err)
+		ret = err;
+	mutex_unlock(&damon_dbgfs_lock);
+
+out:
+	kfree(kbuf);
+	kfree(ctx_name);
+	return ret;
+}
+
+/*
+ * Remove a context of @name and its debugfs directory.
+ *
+ * This function should be called while holding damon_dbgfs_lock.
+ *
+ * Return 0 on success, negative error code otherwise.
+ */
+static int dbgfs_rm_context(char *name)
+{
+	struct dentry *root, *dir, **new_dirs;
+	struct damon_ctx **new_ctxs;
+	int i, j;
+
+	if (damon_nr_running_ctxs())
+		return -EBUSY;
+
+	root = dbgfs_dirs[0];
+	if (!root)
+		return -ENOENT;
+
+	dir = debugfs_lookup(name, root);
+	if (!dir)
+		return -ENOENT;
+
+	new_dirs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_dirs),
+			GFP_KERNEL);
+	if (!new_dirs)
+		return -ENOMEM;
+
+	new_ctxs = kmalloc_array(dbgfs_nr_ctxs - 1, sizeof(*dbgfs_ctxs),
+			GFP_KERNEL);
+	if (!new_ctxs) {
+		kfree(new_dirs);
+		return -ENOMEM;
+	}
+
+	for (i = 0, j = 0; i < dbgfs_nr_ctxs; i++) {
+		if (dbgfs_dirs[i] == dir) {
+			debugfs_remove(dbgfs_dirs[i]);
+			dbgfs_destroy_ctx(dbgfs_ctxs[i]);
+			continue;
+		}
+		new_dirs[j] = dbgfs_dirs[i];
+		new_ctxs[j++] = dbgfs_ctxs[i];
+	}
+
+	kfree(dbgfs_dirs);
+	kfree(dbgfs_ctxs);
+
+	dbgfs_dirs = new_dirs;
+	dbgfs_ctxs = new_ctxs;
+	dbgfs_nr_ctxs--;
+
+	return 0;
+}
+
+static ssize_t dbgfs_rm_context_write(struct file *file,
+		const char __user *buf, size_t count, loff_t *ppos)
+{
+	char *kbuf;
+	ssize_t ret = count;
+	int err;
+	char *ctx_name;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+	ctx_name = kmalloc(count + 1, GFP_KERNEL);
+	if (!ctx_name) {
+		kfree(kbuf);
+		return -ENOMEM;
+	}
+
+	/* Trim white space */
+	if (sscanf(kbuf, "%s", ctx_name) != 1) {
+		ret = -EINVAL;
+		goto out;
+	}
+
+	mutex_lock(&damon_dbgfs_lock);
+	err = dbgfs_rm_context(ctx_name);
+	if (err)
+		ret = err;
+	mutex_unlock(&damon_dbgfs_lock);
+
+out:
+	kfree(kbuf);
+	kfree(ctx_name);
+	return ret;
+}
+
+static ssize_t dbgfs_monitor_on_read(struct file *file,
+		char __user *buf, size_t count, loff_t *ppos)
+{
+	char monitor_on_buf[5];
+	bool monitor_on = damon_nr_running_ctxs() != 0;
+	int len;
+
+	len = scnprintf(monitor_on_buf, 5, monitor_on ? "on\n" : "off\n");
+
+	return simple_read_from_buffer(buf, count, ppos, monitor_on_buf, len);
+}
+
+static ssize_t dbgfs_monitor_on_write(struct file *file,
+		const char __user *buf, size_t count, loff_t *ppos)
+{
+	ssize_t ret = count;
+	char *kbuf;
+	int err;
+
+	kbuf = user_input_str(buf, count, ppos);
+	if (IS_ERR(kbuf))
+		return PTR_ERR(kbuf);
+
+	/* Remove white space */
+	if (sscanf(kbuf, "%s", kbuf) != 1) {
+		kfree(kbuf);
+		return -EINVAL;
+	}
+
+	if (!strncmp(kbuf, "on", count))
+		err = damon_start(dbgfs_ctxs, dbgfs_nr_ctxs);
+	else if (!strncmp(kbuf, "off", count))
+		err = damon_stop(dbgfs_ctxs, dbgfs_nr_ctxs);
+	else
+		err = -EINVAL;
+
+	if (err)
+		ret = err;
+	kfree(kbuf);
+	return ret;
+}
+
+static const struct file_operations mk_contexts_fops = {
+	.write = dbgfs_mk_context_write,
+};
+
+static const struct file_operations rm_contexts_fops = {
+	.write = dbgfs_rm_context_write,
+};
+
+static const struct file_operations monitor_on_fops = {
+	.read = dbgfs_monitor_on_read,
+	.write = dbgfs_monitor_on_write,
+};
+
+static int __init __damon_dbgfs_init(void)
+{
+	struct dentry *dbgfs_root;
+	const char * const file_names[] = {"mk_contexts", "rm_contexts",
+		"monitor_on"};
+	const struct file_operations *fops[] = {&mk_contexts_fops,
+		&rm_contexts_fops, &monitor_on_fops};
+	int i;
+
+	dbgfs_root = debugfs_create_dir("damon", NULL);
+
+	for (i = 0; i < ARRAY_SIZE(file_names); i++)
+		debugfs_create_file(file_names[i], 0600, dbgfs_root, NULL,
+				fops[i]);
+	dbgfs_fill_ctx_dir(dbgfs_root, dbgfs_ctxs[0]);
+
+	dbgfs_dirs = kmalloc_array(1, sizeof(dbgfs_root), GFP_KERNEL);
+	if (!dbgfs_dirs) {
+		debugfs_remove(dbgfs_root);
+		return -ENOMEM;
+	}
+	dbgfs_dirs[0] = dbgfs_root;
+
+	return 0;
+}
+
+/*
+ * Functions for the initialization
+ */
+
+static int __init damon_dbgfs_init(void)
+{
+	int rc;
+
+	dbgfs_ctxs = kmalloc(sizeof(*dbgfs_ctxs), GFP_KERNEL);
+	if (!dbgfs_ctxs)
+		return -ENOMEM;
+	dbgfs_ctxs[0] = dbgfs_new_ctx();
+	if (!dbgfs_ctxs[0]) {
+		kfree(dbgfs_ctxs);
+		return -ENOMEM;
+	}
+	dbgfs_nr_ctxs = 1;
+
+	rc = __damon_dbgfs_init();
+	if (rc) {
+		kfree(dbgfs_ctxs[0]);
+		kfree(dbgfs_ctxs);
+		pr_err("%s: dbgfs init failed\n", __func__);
+	}
+
+	return rc;
+}
+
+module_init(damon_dbgfs_init);
+
+#include "dbgfs-test.h"
diff --git a/mm/damon/vaddr-test.h b/mm/damon/vaddr-test.h
new file mode 100644
index 000000000000..1f5c13257dba
--- /dev/null
+++ b/mm/damon/vaddr-test.h
@@ -0,0 +1,329 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Data Access Monitor Unit Tests
+ *
+ * Copyright 2019 Amazon.com, Inc. or its affiliates.  All rights reserved.
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#ifdef CONFIG_DAMON_VADDR_KUNIT_TEST
+
+#ifndef _DAMON_VADDR_TEST_H
+#define _DAMON_VADDR_TEST_H
+
+#include <kunit/test.h>
+
+static void __link_vmas(struct vm_area_struct *vmas, ssize_t nr_vmas)
+{
+	int i, j;
+	unsigned long largest_gap, gap;
+
+	if (!nr_vmas)
+		return;
+
+	for (i = 0; i < nr_vmas - 1; i++) {
+		vmas[i].vm_next = &vmas[i + 1];
+
+		vmas[i].vm_rb.rb_left = NULL;
+		vmas[i].vm_rb.rb_right = &vmas[i + 1].vm_rb;
+
+		largest_gap = 0;
+		for (j = i; j < nr_vmas; j++) {
+			if (j == 0)
+				continue;
+			gap = vmas[j].vm_start - vmas[j - 1].vm_end;
+			if (gap > largest_gap)
+				largest_gap = gap;
+		}
+		vmas[i].rb_subtree_gap = largest_gap;
+	}
+	vmas[i].vm_next = NULL;
+	vmas[i].vm_rb.rb_right = NULL;
+	vmas[i].rb_subtree_gap = 0;
+}
+
+/*
+ * Test __damon_va_three_regions() function
+ *
+ * In case of virtual memory address spaces monitoring, DAMON converts the
+ * complex and dynamic memory mappings of each target task to three
+ * discontiguous regions which cover every mapped areas.  However, the three
+ * regions should not include the two biggest unmapped areas in the original
+ * mapping, because the two biggest areas are normally the areas between 1)
+ * heap and the mmap()-ed regions, and 2) the mmap()-ed regions and stack.
+ * Because these two unmapped areas are very huge but obviously never accessed,
+ * covering the region is just a waste.
+ *
+ * '__damon_va_three_regions() receives an address space of a process.  It
+ * first identifies the start of mappings, end of mappings, and the two biggest
+ * unmapped areas.  After that, based on the information, it constructs the
+ * three regions and returns.  For more detail, refer to the comment of
+ * 'damon_init_regions_of()' function definition in 'mm/damon.c' file.
+ *
+ * For example, suppose virtual address ranges of 10-20, 20-25, 200-210,
+ * 210-220, 300-305, and 307-330 (Other comments represent this mappings in
+ * more short form: 10-20-25, 200-210-220, 300-305, 307-330) of a process are
+ * mapped.  To cover every mappings, the three regions should start with 10,
+ * and end with 305.  The process also has three unmapped areas, 25-200,
+ * 220-300, and 305-307.  Among those, 25-200 and 220-300 are the biggest two
+ * unmapped areas, and thus it should be converted to three regions of 10-25,
+ * 200-220, and 300-330.
+ */
+static void damon_test_three_regions_in_vmas(struct kunit *test)
+{
+	struct damon_addr_range regions[3] = {0,};
+	/* 10-20-25, 200-210-220, 300-305, 307-330 */
+	struct vm_area_struct vmas[] = {
+		(struct vm_area_struct) {.vm_start = 10, .vm_end = 20},
+		(struct vm_area_struct) {.vm_start = 20, .vm_end = 25},
+		(struct vm_area_struct) {.vm_start = 200, .vm_end = 210},
+		(struct vm_area_struct) {.vm_start = 210, .vm_end = 220},
+		(struct vm_area_struct) {.vm_start = 300, .vm_end = 305},
+		(struct vm_area_struct) {.vm_start = 307, .vm_end = 330},
+	};
+
+	__link_vmas(vmas, 6);
+
+	__damon_va_three_regions(&vmas[0], regions);
+
+	KUNIT_EXPECT_EQ(test, 10ul, regions[0].start);
+	KUNIT_EXPECT_EQ(test, 25ul, regions[0].end);
+	KUNIT_EXPECT_EQ(test, 200ul, regions[1].start);
+	KUNIT_EXPECT_EQ(test, 220ul, regions[1].end);
+	KUNIT_EXPECT_EQ(test, 300ul, regions[2].start);
+	KUNIT_EXPECT_EQ(test, 330ul, regions[2].end);
+}
+
+static struct damon_region *__nth_region_of(struct damon_target *t, int idx)
+{
+	struct damon_region *r;
+	unsigned int i = 0;
+
+	damon_for_each_region(r, t) {
+		if (i++ == idx)
+			return r;
+	}
+
+	return NULL;
+}
+
+/*
+ * Test 'damon_va_apply_three_regions()'
+ *
+ * test			kunit object
+ * regions		an array containing start/end addresses of current
+ *			monitoring target regions
+ * nr_regions		the number of the addresses in 'regions'
+ * three_regions	The three regions that need to be applied now
+ * expected		start/end addresses of monitoring target regions that
+ *			'three_regions' are applied
+ * nr_expected		the number of addresses in 'expected'
+ *
+ * The memory mapping of the target processes changes dynamically.  To follow
+ * the change, DAMON periodically reads the mappings, simplifies it to the
+ * three regions, and updates the monitoring target regions to fit in the three
+ * regions.  The update of current target regions is the role of
+ * 'damon_va_apply_three_regions()'.
+ *
+ * This test passes the given target regions and the new three regions that
+ * need to be applied to the function and check whether it updates the regions
+ * as expected.
+ */
+static void damon_do_test_apply_three_regions(struct kunit *test,
+				unsigned long *regions, int nr_regions,
+				struct damon_addr_range *three_regions,
+				unsigned long *expected, int nr_expected)
+{
+	struct damon_ctx *ctx = damon_new_ctx();
+	struct damon_target *t;
+	struct damon_region *r;
+	int i;
+
+	t = damon_new_target(42);
+	for (i = 0; i < nr_regions / 2; i++) {
+		r = damon_new_region(regions[i * 2], regions[i * 2 + 1]);
+		damon_add_region(r, t);
+	}
+	damon_add_target(ctx, t);
+
+	damon_va_apply_three_regions(t, three_regions);
+
+	for (i = 0; i < nr_expected / 2; i++) {
+		r = __nth_region_of(t, i);
+		KUNIT_EXPECT_EQ(test, r->ar.start, expected[i * 2]);
+		KUNIT_EXPECT_EQ(test, r->ar.end, expected[i * 2 + 1]);
+	}
+
+	damon_destroy_ctx(ctx);
+}
+
+/*
+ * This function test most common case where the three big regions are only
+ * slightly changed.  Target regions should adjust their boundary (10-20-30,
+ * 50-55, 70-80, 90-100) to fit with the new big regions or remove target
+ * regions (57-79) that now out of the three regions.
+ */
+static void damon_test_apply_three_regions1(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 45-55, 73-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 45, .end = 55},
+		(struct damon_addr_range){.start = 73, .end = 104} };
+	/* 5-20-27, 45-55, 73-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 45, 55,
+				73, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test slightly bigger change.  Similar to above, but the second big region
+ * now require two target regions (50-55, 57-59) to be removed.
+ */
+static void damon_test_apply_three_regions2(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 56-57, 65-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 56, .end = 57},
+		(struct damon_addr_range){.start = 65, .end = 104} };
+	/* 5-20-27, 56-57, 65-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 56, 57,
+				65, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test a big change.  The second big region has totally freed and mapped to
+ * different area (50-59 -> 61-63).  The target regions which were in the old
+ * second big region (50-55-57-59) should be removed and new target region
+ * covering the second big region (61-63) should be created.
+ */
+static void damon_test_apply_three_regions3(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-27, 61-63, 65-104 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 27},
+		(struct damon_addr_range){.start = 61, .end = 63},
+		(struct damon_addr_range){.start = 65, .end = 104} };
+	/* 5-20-27, 61-63, 65-80-90-104 */
+	unsigned long expected[] = {5, 20, 20, 27, 61, 63,
+				65, 80, 80, 90, 90, 104};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+/*
+ * Test another big change.  Both of the second and third big regions (50-59
+ * and 70-100) has totally freed and mapped to different area (30-32 and
+ * 65-68).  The target regions which were in the old second and third big
+ * regions should now be removed and new target regions covering the new second
+ * and third big regions should be crated.
+ */
+static void damon_test_apply_three_regions4(struct kunit *test)
+{
+	/* 10-20-30, 50-55-57-59, 70-80-90-100 */
+	unsigned long regions[] = {10, 20, 20, 30, 50, 55, 55, 57, 57, 59,
+				70, 80, 80, 90, 90, 100};
+	/* 5-7, 30-32, 65-68 */
+	struct damon_addr_range new_three_regions[3] = {
+		(struct damon_addr_range){.start = 5, .end = 7},
+		(struct damon_addr_range){.start = 30, .end = 32},
+		(struct damon_addr_range){.start = 65, .end = 68} };
+	/* expect 5-7, 30-32, 65-68 */
+	unsigned long expected[] = {5, 7, 30, 32, 65, 68};
+
+	damon_do_test_apply_three_regions(test, regions, ARRAY_SIZE(regions),
+			new_three_regions, expected, ARRAY_SIZE(expected));
+}
+
+static void damon_test_split_evenly(struct kunit *test)
+{
+	struct damon_ctx *c = damon_new_ctx();
+	struct damon_target *t;
+	struct damon_region *r;
+	unsigned long i;
+
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(NULL, NULL, 5),
+			-EINVAL);
+
+	t = damon_new_target(42);
+	r = damon_new_region(0, 100);
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(t, r, 0), -EINVAL);
+
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(t, r, 10), 0);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 10u);
+
+	i = 0;
+	damon_for_each_region(r, t) {
+		KUNIT_EXPECT_EQ(test, r->ar.start, i++ * 10);
+		KUNIT_EXPECT_EQ(test, r->ar.end, i * 10);
+	}
+	damon_free_target(t);
+
+	t = damon_new_target(42);
+	r = damon_new_region(5, 59);
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(t, r, 5), 0);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 5u);
+
+	i = 0;
+	damon_for_each_region(r, t) {
+		if (i == 4)
+			break;
+		KUNIT_EXPECT_EQ(test, r->ar.start, 5 + 10 * i++);
+		KUNIT_EXPECT_EQ(test, r->ar.end, 5 + 10 * i);
+	}
+	KUNIT_EXPECT_EQ(test, r->ar.start, 5 + 10 * i);
+	KUNIT_EXPECT_EQ(test, r->ar.end, 59ul);
+	damon_free_target(t);
+
+	t = damon_new_target(42);
+	r = damon_new_region(5, 6);
+	damon_add_region(r, t);
+	KUNIT_EXPECT_EQ(test, damon_va_evenly_split_region(t, r, 2), -EINVAL);
+	KUNIT_EXPECT_EQ(test, damon_nr_regions(t), 1u);
+
+	damon_for_each_region(r, t) {
+		KUNIT_EXPECT_EQ(test, r->ar.start, 5ul);
+		KUNIT_EXPECT_EQ(test, r->ar.end, 6ul);
+	}
+	damon_free_target(t);
+	damon_destroy_ctx(c);
+}
+
+static struct kunit_case damon_test_cases[] = {
+	KUNIT_CASE(damon_test_three_regions_in_vmas),
+	KUNIT_CASE(damon_test_apply_three_regions1),
+	KUNIT_CASE(damon_test_apply_three_regions2),
+	KUNIT_CASE(damon_test_apply_three_regions3),
+	KUNIT_CASE(damon_test_apply_three_regions4),
+	KUNIT_CASE(damon_test_split_evenly),
+	{},
+};
+
+static struct kunit_suite damon_test_suite = {
+	.name = "damon-primitives",
+	.test_cases = damon_test_cases,
+};
+kunit_test_suite(damon_test_suite);
+
+#endif /* _DAMON_VADDR_TEST_H */
+
+#endif	/* CONFIG_DAMON_VADDR_KUNIT_TEST */
diff --git a/mm/damon/vaddr.c b/mm/damon/vaddr.c
new file mode 100644
index 000000000000..58c1fb2aafa9
--- /dev/null
+++ b/mm/damon/vaddr.c
@@ -0,0 +1,672 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * DAMON Primitives for Virtual Address Spaces
+ *
+ * Author: SeongJae Park <sjpark@amazon.de>
+ */
+
+#define pr_fmt(fmt) "damon-va: " fmt
+
+#include <linux/damon.h>
+#include <linux/hugetlb.h>
+#include <linux/mm.h>
+#include <linux/mmu_notifier.h>
+#include <linux/highmem.h>
+#include <linux/page_idle.h>
+#include <linux/pagewalk.h>
+#include <linux/random.h>
+#include <linux/sched/mm.h>
+#include <linux/slab.h>
+
+#ifdef CONFIG_DAMON_VADDR_KUNIT_TEST
+#undef DAMON_MIN_REGION
+#define DAMON_MIN_REGION 1
+#endif
+
+/* Get a random number in [l, r) */
+#define damon_rand(l, r) (l + prandom_u32_max(r - l))
+
+/*
+ * 't->id' should be the pointer to the relevant 'struct pid' having reference
+ * count.  Caller must put the returned task, unless it is NULL.
+ */
+#define damon_get_task_struct(t) \
+	(get_pid_task((struct pid *)t->id, PIDTYPE_PID))
+
+/*
+ * Get the mm_struct of the given target
+ *
+ * Caller _must_ put the mm_struct after use, unless it is NULL.
+ *
+ * Returns the mm_struct of the target on success, NULL on failure
+ */
+static struct mm_struct *damon_get_mm(struct damon_target *t)
+{
+	struct task_struct *task;
+	struct mm_struct *mm;
+
+	task = damon_get_task_struct(t);
+	if (!task)
+		return NULL;
+
+	mm = get_task_mm(task);
+	put_task_struct(task);
+	return mm;
+}
+
+/*
+ * Functions for the initial monitoring target regions construction
+ */
+
+/*
+ * Size-evenly split a region into 'nr_pieces' small regions
+ *
+ * Returns 0 on success, or negative error code otherwise.
+ */
+static int damon_va_evenly_split_region(struct damon_target *t,
+		struct damon_region *r, unsigned int nr_pieces)
+{
+	unsigned long sz_orig, sz_piece, orig_end;
+	struct damon_region *n = NULL, *next;
+	unsigned long start;
+
+	if (!r || !nr_pieces)
+		return -EINVAL;
+
+	orig_end = r->ar.end;
+	sz_orig = r->ar.end - r->ar.start;
+	sz_piece = ALIGN_DOWN(sz_orig / nr_pieces, DAMON_MIN_REGION);
+
+	if (!sz_piece)
+		return -EINVAL;
+
+	r->ar.end = r->ar.start + sz_piece;
+	next = damon_next_region(r);
+	for (start = r->ar.end; start + sz_piece <= orig_end;
+			start += sz_piece) {
+		n = damon_new_region(start, start + sz_piece);
+		if (!n)
+			return -ENOMEM;
+		damon_insert_region(n, r, next, t);
+		r = n;
+	}
+	/* complement last region for possible rounding error */
+	if (n)
+		n->ar.end = orig_end;
+
+	return 0;
+}
+
+static unsigned long sz_range(struct damon_addr_range *r)
+{
+	return r->end - r->start;
+}
+
+static void swap_ranges(struct damon_addr_range *r1,
+			struct damon_addr_range *r2)
+{
+	struct damon_addr_range tmp;
+
+	tmp = *r1;
+	*r1 = *r2;
+	*r2 = tmp;
+}
+
+/*
+ * Find three regions separated by two biggest unmapped regions
+ *
+ * vma		the head vma of the target address space
+ * regions	an array of three address ranges that results will be saved
+ *
+ * This function receives an address space and finds three regions in it which
+ * separated by the two biggest unmapped regions in the space.  Please refer to
+ * below comments of '__damon_va_init_regions()' function to know why this is
+ * necessary.
+ *
+ * Returns 0 if success, or negative error code otherwise.
+ */
+static int __damon_va_three_regions(struct vm_area_struct *vma,
+				       struct damon_addr_range regions[3])
+{
+	struct damon_addr_range gap = {0}, first_gap = {0}, second_gap = {0};
+	struct vm_area_struct *last_vma = NULL;
+	unsigned long start = 0;
+	struct rb_root rbroot;
+
+	/* Find two biggest gaps so that first_gap > second_gap > others */
+	for (; vma; vma = vma->vm_next) {
+		if (!last_vma) {
+			start = vma->vm_start;
+			goto next;
+		}
+
+		if (vma->rb_subtree_gap <= sz_range(&second_gap)) {
+			rbroot.rb_node = &vma->vm_rb;
+			vma = rb_entry(rb_last(&rbroot),
+					struct vm_area_struct, vm_rb);
+			goto next;
+		}
+
+		gap.start = last_vma->vm_end;
+		gap.end = vma->vm_start;
+		if (sz_range(&gap) > sz_range(&second_gap)) {
+			swap_ranges(&gap, &second_gap);
+			if (sz_range(&second_gap) > sz_range(&first_gap))
+				swap_ranges(&second_gap, &first_gap);
+		}
+next:
+		last_vma = vma;
+	}
+
+	if (!sz_range(&second_gap) || !sz_range(&first_gap))
+		return -EINVAL;
+
+	/* Sort the two biggest gaps by address */
+	if (first_gap.start > second_gap.start)
+		swap_ranges(&first_gap, &second_gap);
+
+	/* Store the result */
+	regions[0].start = ALIGN(start, DAMON_MIN_REGION);
+	regions[0].end = ALIGN(first_gap.start, DAMON_MIN_REGION);
+	regions[1].start = ALIGN(first_gap.end, DAMON_MIN_REGION);
+	regions[1].end = ALIGN(second_gap.start, DAMON_MIN_REGION);
+	regions[2].start = ALIGN(second_gap.end, DAMON_MIN_REGION);
+	regions[2].end = ALIGN(last_vma->vm_end, DAMON_MIN_REGION);
+
+	return 0;
+}
+
+/*
+ * Get the three regions in the given target (task)
+ *
+ * Returns 0 on success, negative error code otherwise.
+ */
+static int damon_va_three_regions(struct damon_target *t,
+				struct damon_addr_range regions[3])
+{
+	struct mm_struct *mm;
+	int rc;
+
+	mm = damon_get_mm(t);
+	if (!mm)
+		return -EINVAL;
+
+	mmap_read_lock(mm);
+	rc = __damon_va_three_regions(mm->mmap, regions);
+	mmap_read_unlock(mm);
+
+	mmput(mm);
+	return rc;
+}
+
+/*
+ * Initialize the monitoring target regions for the given target (task)
+ *
+ * t	the given target
+ *
+ * Because only a number of small portions of the entire address space
+ * is actually mapped to the memory and accessed, monitoring the unmapped
+ * regions is wasteful.  That said, because we can deal with small noises,
+ * tracking every mapping is not strictly required but could even incur a high
+ * overhead if the mapping frequently changes or the number of mappings is
+ * high.  The adaptive regions adjustment mechanism will further help to deal
+ * with the noise by simply identifying the unmapped areas as a region that
+ * has no access.  Moreover, applying the real mappings that would have many
+ * unmapped areas inside will make the adaptive mechanism quite complex.  That
+ * said, too huge unmapped areas inside the monitoring target should be removed
+ * to not take the time for the adaptive mechanism.
+ *
+ * For the reason, we convert the complex mappings to three distinct regions
+ * that cover every mapped area of the address space.  Also the two gaps
+ * between the three regions are the two biggest unmapped areas in the given
+ * address space.  In detail, this function first identifies the start and the
+ * end of the mappings and the two biggest unmapped areas of the address space.
+ * Then, it constructs the three regions as below:
+ *
+ *     [mappings[0]->start, big_two_unmapped_areas[0]->start)
+ *     [big_two_unmapped_areas[0]->end, big_two_unmapped_areas[1]->start)
+ *     [big_two_unmapped_areas[1]->end, mappings[nr_mappings - 1]->end)
+ *
+ * As usual memory map of processes is as below, the gap between the heap and
+ * the uppermost mmap()-ed region, and the gap between the lowermost mmap()-ed
+ * region and the stack will be two biggest unmapped regions.  Because these
+ * gaps are exceptionally huge areas in usual address space, excluding these
+ * two biggest unmapped regions will be sufficient to make a trade-off.
+ *
+ *   <heap>
+ *   <BIG UNMAPPED REGION 1>
+ *   <uppermost mmap()-ed region>
+ *   (other mmap()-ed regions and small unmapped regions)
+ *   <lowermost mmap()-ed region>
+ *   <BIG UNMAPPED REGION 2>
+ *   <stack>
+ */
+static void __damon_va_init_regions(struct damon_ctx *ctx,
+				     struct damon_target *t)
+{
+	struct damon_region *r;
+	struct damon_addr_range regions[3];
+	unsigned long sz = 0, nr_pieces;
+	int i;
+
+	if (damon_va_three_regions(t, regions)) {
+		pr_err("Failed to get three regions of target %lu\n", t->id);
+		return;
+	}
+
+	for (i = 0; i < 3; i++)
+		sz += regions[i].end - regions[i].start;
+	if (ctx->min_nr_regions)
+		sz /= ctx->min_nr_regions;
+	if (sz < DAMON_MIN_REGION)
+		sz = DAMON_MIN_REGION;
+
+	/* Set the initial three regions of the target */
+	for (i = 0; i < 3; i++) {
+		r = damon_new_region(regions[i].start, regions[i].end);
+		if (!r) {
+			pr_err("%d'th init region creation failed\n", i);
+			return;
+		}
+		damon_add_region(r, t);
+
+		nr_pieces = (regions[i].end - regions[i].start) / sz;
+		damon_va_evenly_split_region(t, r, nr_pieces);
+	}
+}
+
+/* Initialize '->regions_list' of every target (task) */
+void damon_va_init(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+
+	damon_for_each_target(t, ctx) {
+		/* the user may set the target regions as they want */
+		if (!damon_nr_regions(t))
+			__damon_va_init_regions(ctx, t);
+	}
+}
+
+/*
+ * Functions for the dynamic monitoring target regions update
+ */
+
+/*
+ * Check whether a region is intersecting an address range
+ *
+ * Returns true if it is.
+ */
+static bool damon_intersect(struct damon_region *r, struct damon_addr_range *re)
+{
+	return !(r->ar.end <= re->start || re->end <= r->ar.start);
+}
+
+/*
+ * Update damon regions for the three big regions of the given target
+ *
+ * t		the given target
+ * bregions	the three big regions of the target
+ */
+static void damon_va_apply_three_regions(struct damon_target *t,
+		struct damon_addr_range bregions[3])
+{
+	struct damon_region *r, *next;
+	unsigned int i = 0;
+
+	/* Remove regions which are not in the three big regions now */
+	damon_for_each_region_safe(r, next, t) {
+		for (i = 0; i < 3; i++) {
+			if (damon_intersect(r, &bregions[i]))
+				break;
+		}
+		if (i == 3)
+			damon_destroy_region(r, t);
+	}
+
+	/* Adjust intersecting regions to fit with the three big regions */
+	for (i = 0; i < 3; i++) {
+		struct damon_region *first = NULL, *last;
+		struct damon_region *newr;
+		struct damon_addr_range *br;
+
+		br = &bregions[i];
+		/* Get the first and last regions which intersects with br */
+		damon_for_each_region(r, t) {
+			if (damon_intersect(r, br)) {
+				if (!first)
+					first = r;
+				last = r;
+			}
+			if (r->ar.start >= br->end)
+				break;
+		}
+		if (!first) {
+			/* no damon_region intersects with this big region */
+			newr = damon_new_region(
+					ALIGN_DOWN(br->start,
+						DAMON_MIN_REGION),
+					ALIGN(br->end, DAMON_MIN_REGION));
+			if (!newr)
+				continue;
+			damon_insert_region(newr, damon_prev_region(r), r, t);
+		} else {
+			first->ar.start = ALIGN_DOWN(br->start,
+					DAMON_MIN_REGION);
+			last->ar.end = ALIGN(br->end, DAMON_MIN_REGION);
+		}
+	}
+}
+
+/*
+ * Update regions for current memory mappings
+ */
+void damon_va_update(struct damon_ctx *ctx)
+{
+	struct damon_addr_range three_regions[3];
+	struct damon_target *t;
+
+	damon_for_each_target(t, ctx) {
+		if (damon_va_three_regions(t, three_regions))
+			continue;
+		damon_va_apply_three_regions(t, three_regions);
+	}
+}
+
+/*
+ * Get an online page for a pfn if it's in the LRU list.  Otherwise, returns
+ * NULL.
+ *
+ * The body of this function is stolen from the 'page_idle_get_page()'.  We
+ * steal rather than reuse it because the code is quite simple.
+ */
+static struct page *damon_get_page(unsigned long pfn)
+{
+	struct page *page = pfn_to_online_page(pfn);
+
+	if (!page || !PageLRU(page) || !get_page_unless_zero(page))
+		return NULL;
+
+	if (unlikely(!PageLRU(page))) {
+		put_page(page);
+		page = NULL;
+	}
+	return page;
+}
+
+static void damon_ptep_mkold(pte_t *pte, struct mm_struct *mm,
+			     unsigned long addr)
+{
+	bool referenced = false;
+	struct page *page = damon_get_page(pte_pfn(*pte));
+
+	if (!page)
+		return;
+
+	if (pte_young(*pte)) {
+		referenced = true;
+		*pte = pte_mkold(*pte);
+	}
+
+#ifdef CONFIG_MMU_NOTIFIER
+	if (mmu_notifier_clear_young(mm, addr, addr + PAGE_SIZE))
+		referenced = true;
+#endif /* CONFIG_MMU_NOTIFIER */
+
+	if (referenced)
+		set_page_young(page);
+
+	set_page_idle(page);
+	put_page(page);
+}
+
+static void damon_pmdp_mkold(pmd_t *pmd, struct mm_struct *mm,
+			     unsigned long addr)
+{
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	bool referenced = false;
+	struct page *page = damon_get_page(pmd_pfn(*pmd));
+
+	if (!page)
+		return;
+
+	if (pmd_young(*pmd)) {
+		referenced = true;
+		*pmd = pmd_mkold(*pmd);
+	}
+
+#ifdef CONFIG_MMU_NOTIFIER
+	if (mmu_notifier_clear_young(mm, addr,
+				addr + ((1UL) << HPAGE_PMD_SHIFT)))
+		referenced = true;
+#endif /* CONFIG_MMU_NOTIFIER */
+
+	if (referenced)
+		set_page_young(page);
+
+	set_page_idle(page);
+	put_page(page);
+#endif /* CONFIG_TRANSPARENT_HUGEPAGE */
+}
+
+static int damon_mkold_pmd_entry(pmd_t *pmd, unsigned long addr,
+		unsigned long next, struct mm_walk *walk)
+{
+	pte_t *pte;
+	spinlock_t *ptl;
+
+	if (pmd_huge(*pmd)) {
+		ptl = pmd_lock(walk->mm, pmd);
+		if (pmd_huge(*pmd)) {
+			damon_pmdp_mkold(pmd, walk->mm, addr);
+			spin_unlock(ptl);
+			return 0;
+		}
+		spin_unlock(ptl);
+	}
+
+	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+		return 0;
+	pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
+	if (!pte_present(*pte))
+		goto out;
+	damon_ptep_mkold(pte, walk->mm, addr);
+out:
+	pte_unmap_unlock(pte, ptl);
+	return 0;
+}
+
+static struct mm_walk_ops damon_mkold_ops = {
+	.pmd_entry = damon_mkold_pmd_entry,
+};
+
+static void damon_va_mkold(struct mm_struct *mm, unsigned long addr)
+{
+	mmap_read_lock(mm);
+	walk_page_range(mm, addr, addr + 1, &damon_mkold_ops, NULL);
+	mmap_read_unlock(mm);
+}
+
+/*
+ * Functions for the access checking of the regions
+ */
+
+static void damon_va_prepare_access_check(struct damon_ctx *ctx,
+			struct mm_struct *mm, struct damon_region *r)
+{
+	r->sampling_addr = damon_rand(r->ar.start, r->ar.end);
+
+	damon_va_mkold(mm, r->sampling_addr);
+}
+
+void damon_va_prepare_access_checks(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	struct mm_struct *mm;
+	struct damon_region *r;
+
+	damon_for_each_target(t, ctx) {
+		mm = damon_get_mm(t);
+		if (!mm)
+			continue;
+		damon_for_each_region(r, t)
+			damon_va_prepare_access_check(ctx, mm, r);
+		mmput(mm);
+	}
+}
+
+struct damon_young_walk_private {
+	unsigned long *page_sz;
+	bool young;
+};
+
+static int damon_young_pmd_entry(pmd_t *pmd, unsigned long addr,
+		unsigned long next, struct mm_walk *walk)
+{
+	pte_t *pte;
+	spinlock_t *ptl;
+	struct page *page;
+	struct damon_young_walk_private *priv = walk->private;
+
+#ifdef CONFIG_TRANSPARENT_HUGEPAGE
+	if (pmd_huge(*pmd)) {
+		ptl = pmd_lock(walk->mm, pmd);
+		if (!pmd_huge(*pmd)) {
+			spin_unlock(ptl);
+			goto regular_page;
+		}
+		page = damon_get_page(pmd_pfn(*pmd));
+		if (!page)
+			goto huge_out;
+		if (pmd_young(*pmd) || !page_is_idle(page) ||
+					mmu_notifier_test_young(walk->mm,
+						addr)) {
+			*priv->page_sz = ((1UL) << HPAGE_PMD_SHIFT);
+			priv->young = true;
+		}
+		put_page(page);
+huge_out:
+		spin_unlock(ptl);
+		return 0;
+	}
+
+regular_page:
+#endif	/* CONFIG_TRANSPARENT_HUGEPAGE */
+
+	if (pmd_none(*pmd) || unlikely(pmd_bad(*pmd)))
+		return -EINVAL;
+	pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl);
+	if (!pte_present(*pte))
+		goto out;
+	page = damon_get_page(pte_pfn(*pte));
+	if (!page)
+		goto out;
+	if (pte_young(*pte) || !page_is_idle(page) ||
+			mmu_notifier_test_young(walk->mm, addr)) {
+		*priv->page_sz = PAGE_SIZE;
+		priv->young = true;
+	}
+	put_page(page);
+out:
+	pte_unmap_unlock(pte, ptl);
+	return 0;
+}
+
+static struct mm_walk_ops damon_young_ops = {
+	.pmd_entry = damon_young_pmd_entry,
+};
+
+static bool damon_va_young(struct mm_struct *mm, unsigned long addr,
+		unsigned long *page_sz)
+{
+	struct damon_young_walk_private arg = {
+		.page_sz = page_sz,
+		.young = false,
+	};
+
+	mmap_read_lock(mm);
+	walk_page_range(mm, addr, addr + 1, &damon_young_ops, &arg);
+	mmap_read_unlock(mm);
+	return arg.young;
+}
+
+/*
+ * Check whether the region was accessed after the last preparation
+ *
+ * mm	'mm_struct' for the given virtual address space
+ * r	the region to be checked
+ */
+static void damon_va_check_access(struct damon_ctx *ctx,
+			       struct mm_struct *mm, struct damon_region *r)
+{
+	static struct mm_struct *last_mm;
+	static unsigned long last_addr;
+	static unsigned long last_page_sz = PAGE_SIZE;
+	static bool last_accessed;
+
+	/* If the region is in the last checked page, reuse the result */
+	if (mm == last_mm && (ALIGN_DOWN(last_addr, last_page_sz) ==
+				ALIGN_DOWN(r->sampling_addr, last_page_sz))) {
+		if (last_accessed)
+			r->nr_accesses++;
+		return;
+	}
+
+	last_accessed = damon_va_young(mm, r->sampling_addr, &last_page_sz);
+	if (last_accessed)
+		r->nr_accesses++;
+
+	last_mm = mm;
+	last_addr = r->sampling_addr;
+}
+
+unsigned int damon_va_check_accesses(struct damon_ctx *ctx)
+{
+	struct damon_target *t;
+	struct mm_struct *mm;
+	struct damon_region *r;
+	unsigned int max_nr_accesses = 0;
+
+	damon_for_each_target(t, ctx) {
+		mm = damon_get_mm(t);
+		if (!mm)
+			continue;
+		damon_for_each_region(r, t) {
+			damon_va_check_access(ctx, mm, r);
+			max_nr_accesses = max(r->nr_accesses, max_nr_accesses);
+		}
+		mmput(mm);
+	}
+
+	return max_nr_accesses;
+}
+
+/*
+ * Functions for the target validity check and cleanup
+ */
+
+bool damon_va_target_valid(void *target)
+{
+	struct damon_target *t = target;
+	struct task_struct *task;
+
+	task = damon_get_task_struct(t);
+	if (task) {
+		put_task_struct(task);
+		return true;
+	}
+
+	return false;
+}
+
+void damon_va_set_primitives(struct damon_ctx *ctx)
+{
+	ctx->primitive.init = damon_va_init;
+	ctx->primitive.update = damon_va_update;
+	ctx->primitive.prepare_access_checks = damon_va_prepare_access_checks;
+	ctx->primitive.check_accesses = damon_va_check_accesses;
+	ctx->primitive.reset_aggregated = NULL;
+	ctx->primitive.target_valid = damon_va_target_valid;
+	ctx->primitive.cleanup = NULL;
+}
+
+#include "vaddr-test.h"
diff --git a/mm/early_ioremap.c b/mm/early_ioremap.c
index 164607c7cdf1..74984c23a87e 100644
--- a/mm/early_ioremap.c
+++ b/mm/early_ioremap.c
@@ -38,13 +38,8 @@ pgprot_t __init __weak early_memremap_pgprot_adjust(resource_size_t phys_addr,
 	return prot;
 }
 
-void __init __weak early_ioremap_shutdown(void)
-{
-}
-
 void __init early_ioremap_reset(void)
 {
-	early_ioremap_shutdown();
 	after_paging_init = 1;
 }
 
diff --git a/mm/gup.c b/mm/gup.c
index 9935a4480710..886d6148d3d0 100644
--- a/mm/gup.c
+++ b/mm/gup.c
@@ -62,24 +62,11 @@ static void put_page_refs(struct page *page, int refs)
 	put_page(page);
 }
 
-/**
- * try_get_compound_head() - return the compound head page with refcount
- * appropriately incremented, or NULL if that failed.
- *
- * This handles potential refcount overflow correctly. It also works correctly
- * for various lockless get_user_pages()-related callers, due to the use of
- * page_cache_add_speculative().
- *
- * Even though the name includes "compound_head", this function is still
- * appropriate for callers that have a non-compound @page to get.
- *
- * @page:  pointer to page to be gotten
- * @refs:  the value to add to the page's refcount
- *
- * Return: head page (with refcount appropriately incremented) for success, or
- * NULL upon failure.
+/*
+ * Return the compound head page with ref appropriately incremented,
+ * or NULL if that failed.
  */
-struct page *try_get_compound_head(struct page *page, int refs)
+static inline struct page *try_get_compound_head(struct page *page, int refs)
 {
 	struct page *head = compound_head(page);
 
diff --git a/mm/highmem.c b/mm/highmem.c
index 4fb51d735aa6..4212ad0e4a19 100644
--- a/mm/highmem.c
+++ b/mm/highmem.c
@@ -436,7 +436,7 @@ EXPORT_SYMBOL(zero_user_segments);
 
 static inline int kmap_local_idx_push(void)
 {
-	WARN_ON_ONCE(in_irq() && !irqs_disabled());
+	WARN_ON_ONCE(in_hardirq() && !irqs_disabled());
 	current->kmap_ctrl.idx += KM_INCR;
 	BUG_ON(current->kmap_ctrl.idx >= KM_MAX_IDX);
 	return current->kmap_ctrl.idx - 1;
diff --git a/mm/hmm.c b/mm/hmm.c
index fad6be2bf072..842e26599238 100644
--- a/mm/hmm.c
+++ b/mm/hmm.c
@@ -295,10 +295,13 @@ static int hmm_vma_handle_pte(struct mm_walk *walk, unsigned long addr,
 		goto fault;
 
 	/*
+	 * Bypass devmap pte such as DAX page when all pfn requested
+	 * flags(pfn_req_flags) are fulfilled.
 	 * Since each architecture defines a struct page for the zero page, just
 	 * fall through and treat it like a normal page.
 	 */
-	if (pte_special(pte) && !is_zero_pfn(pte_pfn(pte))) {
+	if (pte_special(pte) && !pte_devmap(pte) &&
+	    !is_zero_pfn(pte_pfn(pte))) {
 		if (hmm_pte_need_fault(hmm_vma_walk, pfn_req_flags, 0)) {
 			pte_unmap(ptep);
 			return -EFAULT;
diff --git a/mm/ioremap.c b/mm/ioremap.c
index 8ee0136f8cb0..5fe598ecd9b7 100644
--- a/mm/ioremap.c
+++ b/mm/ioremap.c
@@ -8,33 +8,9 @@
  */
 #include <linux/vmalloc.h>
 #include <linux/mm.h>
-#include <linux/sched.h>
 #include <linux/io.h>
 #include <linux/export.h>
-#include <asm/cacheflush.h>
 
-#include "pgalloc-track.h"
-
-#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
-static unsigned int __ro_after_init iomap_max_page_shift = BITS_PER_LONG - 1;
-
-static int __init set_nohugeiomap(char *str)
-{
-	iomap_max_page_shift = PAGE_SHIFT;
-	return 0;
-}
-early_param("nohugeiomap", set_nohugeiomap);
-#else /* CONFIG_HAVE_ARCH_HUGE_VMAP */
-static const unsigned int iomap_max_page_shift = PAGE_SHIFT;
-#endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
-
-int ioremap_page_range(unsigned long addr,
-		       unsigned long end, phys_addr_t phys_addr, pgprot_t prot)
-{
-	return vmap_range(addr, end, phys_addr, prot, iomap_max_page_shift);
-}
-
-#ifdef CONFIG_GENERIC_IOREMAP
 void __iomem *ioremap_prot(phys_addr_t addr, size_t size, unsigned long prot)
 {
 	unsigned long offset, vaddr;
@@ -71,4 +47,3 @@ void iounmap(volatile void __iomem *addr)
 	vunmap((void *)((unsigned long)addr & PAGE_MASK));
 }
 EXPORT_SYMBOL(iounmap);
-#endif /* CONFIG_GENERIC_IOREMAP */
diff --git a/mm/kfence/core.c b/mm/kfence/core.c
index 575c685aa642..7a97db8bc8e7 100644
--- a/mm/kfence/core.c
+++ b/mm/kfence/core.c
@@ -20,6 +20,7 @@
 #include <linux/moduleparam.h>
 #include <linux/random.h>
 #include <linux/rcupdate.h>
+#include <linux/sched/clock.h>
 #include <linux/sched/sysctl.h>
 #include <linux/seq_file.h>
 #include <linux/slab.h>
@@ -196,6 +197,8 @@ static noinline void metadata_update_state(struct kfence_metadata *meta,
 	 */
 	track->num_stack_entries = stack_trace_save(track->stack_entries, KFENCE_STACK_DEPTH, 1);
 	track->pid = task_pid_nr(current);
+	track->cpu = raw_smp_processor_id();
+	track->ts_nsec = local_clock(); /* Same source as printk timestamps. */
 
 	/*
 	 * Pairs with READ_ONCE() in
diff --git a/mm/kfence/kfence.h b/mm/kfence/kfence.h
index 24065321ff8a..c1f23c61e5f9 100644
--- a/mm/kfence/kfence.h
+++ b/mm/kfence/kfence.h
@@ -36,6 +36,8 @@ enum kfence_object_state {
 /* Alloc/free tracking information. */
 struct kfence_track {
 	pid_t pid;
+	int cpu;
+	u64 ts_nsec;
 	int num_stack_entries;
 	unsigned long stack_entries[KFENCE_STACK_DEPTH];
 };
diff --git a/mm/kfence/kfence_test.c b/mm/kfence/kfence_test.c
index eb6307c199ea..f1690cf54199 100644
--- a/mm/kfence/kfence_test.c
+++ b/mm/kfence/kfence_test.c
@@ -800,6 +800,9 @@ static int test_init(struct kunit *test)
 	unsigned long flags;
 	int i;
 
+	if (!__kfence_pool)
+		return -EINVAL;
+
 	spin_lock_irqsave(&observed.lock, flags);
 	for (i = 0; i < ARRAY_SIZE(observed.lines); i++)
 		observed.lines[i][0] = '\0';
diff --git a/mm/kfence/report.c b/mm/kfence/report.c
index 4b891dd75650..f93a7b2a338b 100644
--- a/mm/kfence/report.c
+++ b/mm/kfence/report.c
@@ -9,6 +9,7 @@
 
 #include <linux/kernel.h>
 #include <linux/lockdep.h>
+#include <linux/math.h>
 #include <linux/printk.h>
 #include <linux/sched/debug.h>
 #include <linux/seq_file.h>
@@ -100,6 +101,13 @@ static void kfence_print_stack(struct seq_file *seq, const struct kfence_metadat
 			       bool show_alloc)
 {
 	const struct kfence_track *track = show_alloc ? &meta->alloc_track : &meta->free_track;
+	u64 ts_sec = track->ts_nsec;
+	unsigned long rem_nsec = do_div(ts_sec, NSEC_PER_SEC);
+
+	/* Timestamp matches printk timestamp format. */
+	seq_con_printf(seq, "%s by task %d on cpu %d at %lu.%06lus:\n",
+		       show_alloc ? "allocated" : "freed", track->pid,
+		       track->cpu, (unsigned long)ts_sec, rem_nsec / 1000);
 
 	if (track->num_stack_entries) {
 		/* Skip allocation/free internals stack. */
@@ -126,15 +134,14 @@ void kfence_print_object(struct seq_file *seq, const struct kfence_metadata *met
 		return;
 	}
 
-	seq_con_printf(seq,
-		       "kfence-#%td [0x%p-0x%p"
-		       ", size=%d, cache=%s] allocated by task %d:\n",
-		       meta - kfence_metadata, (void *)start, (void *)(start + size - 1), size,
-		       (cache && cache->name) ? cache->name : "<destroyed>", meta->alloc_track.pid);
+	seq_con_printf(seq, "kfence-#%td: 0x%p-0x%p, size=%d, cache=%s\n\n",
+		       meta - kfence_metadata, (void *)start, (void *)(start + size - 1),
+		       size, (cache && cache->name) ? cache->name : "<destroyed>");
+
 	kfence_print_stack(seq, meta, true);
 
 	if (meta->state == KFENCE_OBJECT_FREED) {
-		seq_con_printf(seq, "\nfreed by task %d:\n", meta->free_track.pid);
+		seq_con_printf(seq, "\n");
 		kfence_print_stack(seq, meta, false);
 	}
 }
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 73d46d16d575..b57383c17cf6 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -113,7 +113,8 @@
 #define BYTES_PER_POINTER	sizeof(void *)
 
 /* GFP bitmask for kmemleak internal allocations */
-#define gfp_kmemleak_mask(gfp)	(((gfp) & (GFP_KERNEL | GFP_ATOMIC)) | \
+#define gfp_kmemleak_mask(gfp)	(((gfp) & (GFP_KERNEL | GFP_ATOMIC | \
+					   __GFP_NOLOCKDEP)) | \
 				 __GFP_NORETRY | __GFP_NOMEMALLOC | \
 				 __GFP_NOWARN)
 
@@ -598,7 +599,7 @@ static struct kmemleak_object *create_object(unsigned long ptr, size_t size,
 	object->checksum = 0;
 
 	/* task information */
-	if (in_irq()) {
+	if (in_hardirq()) {
 		object->pid = 0;
 		strncpy(object->comm, "hardirq", sizeof(object->comm));
 	} else if (in_serving_softirq()) {
diff --git a/mm/maccess.c b/mm/maccess.c
index 3bd70405f2d8..d3f1a1f0b1c1 100644
--- a/mm/maccess.c
+++ b/mm/maccess.c
@@ -24,13 +24,21 @@ bool __weak copy_from_kernel_nofault_allowed(const void *unsafe_src,
 
 long copy_from_kernel_nofault(void *dst, const void *src, size_t size)
 {
+	unsigned long align = 0;
+
+	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
+		align = (unsigned long)dst | (unsigned long)src;
+
 	if (!copy_from_kernel_nofault_allowed(src, size))
 		return -ERANGE;
 
 	pagefault_disable();
-	copy_from_kernel_nofault_loop(dst, src, size, u64, Efault);
-	copy_from_kernel_nofault_loop(dst, src, size, u32, Efault);
-	copy_from_kernel_nofault_loop(dst, src, size, u16, Efault);
+	if (!(align & 7))
+		copy_from_kernel_nofault_loop(dst, src, size, u64, Efault);
+	if (!(align & 3))
+		copy_from_kernel_nofault_loop(dst, src, size, u32, Efault);
+	if (!(align & 1))
+		copy_from_kernel_nofault_loop(dst, src, size, u16, Efault);
 	copy_from_kernel_nofault_loop(dst, src, size, u8, Efault);
 	pagefault_enable();
 	return 0;
@@ -50,10 +58,18 @@ EXPORT_SYMBOL_GPL(copy_from_kernel_nofault);
 
 long copy_to_kernel_nofault(void *dst, const void *src, size_t size)
 {
+	unsigned long align = 0;
+
+	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS))
+		align = (unsigned long)dst | (unsigned long)src;
+
 	pagefault_disable();
-	copy_to_kernel_nofault_loop(dst, src, size, u64, Efault);
-	copy_to_kernel_nofault_loop(dst, src, size, u32, Efault);
-	copy_to_kernel_nofault_loop(dst, src, size, u16, Efault);
+	if (!(align & 7))
+		copy_to_kernel_nofault_loop(dst, src, size, u64, Efault);
+	if (!(align & 3))
+		copy_to_kernel_nofault_loop(dst, src, size, u32, Efault);
+	if (!(align & 1))
+		copy_to_kernel_nofault_loop(dst, src, size, u16, Efault);
 	copy_to_kernel_nofault_loop(dst, src, size, u8, Efault);
 	pagefault_enable();
 	return 0;
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c
index 4c527a80b6c9..9fd0be32a281 100644
--- a/mm/memory_hotplug.c
+++ b/mm/memory_hotplug.c
@@ -52,6 +52,73 @@ module_param(memmap_on_memory, bool, 0444);
 MODULE_PARM_DESC(memmap_on_memory, "Enable memmap on memory for memory hotplug");
 #endif
 
+enum {
+	ONLINE_POLICY_CONTIG_ZONES = 0,
+	ONLINE_POLICY_AUTO_MOVABLE,
+};
+
+const char *online_policy_to_str[] = {
+	[ONLINE_POLICY_CONTIG_ZONES] = "contig-zones",
+	[ONLINE_POLICY_AUTO_MOVABLE] = "auto-movable",
+};
+
+static int set_online_policy(const char *val, const struct kernel_param *kp)
+{
+	int ret = sysfs_match_string(online_policy_to_str, val);
+
+	if (ret < 0)
+		return ret;
+	*((int *)kp->arg) = ret;
+	return 0;
+}
+
+static int get_online_policy(char *buffer, const struct kernel_param *kp)
+{
+	return sprintf(buffer, "%s\n", online_policy_to_str[*((int *)kp->arg)]);
+}
+
+/*
+ * memory_hotplug.online_policy: configure online behavior when onlining without
+ * specifying a zone (MMOP_ONLINE)
+ *
+ * "contig-zones": keep zone contiguous
+ * "auto-movable": online memory to ZONE_MOVABLE if the configuration
+ *                 (auto_movable_ratio, auto_movable_numa_aware) allows for it
+ */
+static int online_policy __read_mostly = ONLINE_POLICY_CONTIG_ZONES;
+static const struct kernel_param_ops online_policy_ops = {
+	.set = set_online_policy,
+	.get = get_online_policy,
+};
+module_param_cb(online_policy, &online_policy_ops, &online_policy, 0644);
+MODULE_PARM_DESC(online_policy,
+		"Set the online policy (\"contig-zones\", \"auto-movable\") "
+		"Default: \"contig-zones\"");
+
+/*
+ * memory_hotplug.auto_movable_ratio: specify maximum MOVABLE:KERNEL ratio
+ *
+ * The ratio represent an upper limit and the kernel might decide to not
+ * online some memory to ZONE_MOVABLE -- e.g., because hotplugged KERNEL memory
+ * doesn't allow for more MOVABLE memory.
+ */
+static unsigned int auto_movable_ratio __read_mostly = 301;
+module_param(auto_movable_ratio, uint, 0644);
+MODULE_PARM_DESC(auto_movable_ratio,
+		"Set the maximum ratio of MOVABLE:KERNEL memory in the system "
+		"in percent for \"auto-movable\" online policy. Default: 301");
+
+/*
+ * memory_hotplug.auto_movable_numa_aware: consider numa node stats
+ */
+#ifdef CONFIG_NUMA
+static bool auto_movable_numa_aware __read_mostly = true;
+module_param(auto_movable_numa_aware, bool, 0644);
+MODULE_PARM_DESC(auto_movable_numa_aware,
+		"Consider numa node stats in addition to global stats in "
+		"\"auto-movable\" online policy. Default: true");
+#endif /* CONFIG_NUMA */
+
 /*
  * online_page_callback contains pointer to current page onlining function.
  * Initially it is generic_online_page(). If it is required it could be
@@ -410,15 +477,13 @@ void __ref remove_pfn_range_from_zone(struct zone *zone,
 				 sizeof(struct page) * cur_nr_pages);
 	}
 
-#ifdef CONFIG_ZONE_DEVICE
 	/*
 	 * Zone shrinking code cannot properly deal with ZONE_DEVICE. So
 	 * we will not try to shrink the zones - which is okay as
 	 * set_zone_contiguous() cannot deal with ZONE_DEVICE either way.
 	 */
-	if (zone_idx(zone) == ZONE_DEVICE)
+	if (zone_is_zone_device(zone))
 		return;
-#endif
 
 	clear_zone_contiguous(zone);
 
@@ -663,6 +728,109 @@ void __ref move_pfn_range_to_zone(struct zone *zone, unsigned long start_pfn,
 	set_zone_contiguous(zone);
 }
 
+struct auto_movable_stats {
+	unsigned long kernel_early_pages;
+	unsigned long movable_pages;
+};
+
+static void auto_movable_stats_account_zone(struct auto_movable_stats *stats,
+					    struct zone *zone)
+{
+	if (zone_idx(zone) == ZONE_MOVABLE) {
+		stats->movable_pages += zone->present_pages;
+	} else {
+		stats->kernel_early_pages += zone->present_early_pages;
+#ifdef CONFIG_CMA
+		/*
+		 * CMA pages (never on hotplugged memory) behave like
+		 * ZONE_MOVABLE.
+		 */
+		stats->movable_pages += zone->cma_pages;
+		stats->kernel_early_pages -= zone->cma_pages;
+#endif /* CONFIG_CMA */
+	}
+}
+struct auto_movable_group_stats {
+	unsigned long movable_pages;
+	unsigned long req_kernel_early_pages;
+};
+
+static int auto_movable_stats_account_group(struct memory_group *group,
+					   void *arg)
+{
+	const int ratio = READ_ONCE(auto_movable_ratio);
+	struct auto_movable_group_stats *stats = arg;
+	long pages;
+
+	/*
+	 * We don't support modifying the config while the auto-movable online
+	 * policy is already enabled. Just avoid the division by zero below.
+	 */
+	if (!ratio)
+		return 0;
+
+	/*
+	 * Calculate how many early kernel pages this group requires to
+	 * satisfy the configured zone ratio.
+	 */
+	pages = group->present_movable_pages * 100 / ratio;
+	pages -= group->present_kernel_pages;
+
+	if (pages > 0)
+		stats->req_kernel_early_pages += pages;
+	stats->movable_pages += group->present_movable_pages;
+	return 0;
+}
+
+static bool auto_movable_can_online_movable(int nid, struct memory_group *group,
+					    unsigned long nr_pages)
+{
+	unsigned long kernel_early_pages, movable_pages;
+	struct auto_movable_group_stats group_stats = {};
+	struct auto_movable_stats stats = {};
+	pg_data_t *pgdat = NODE_DATA(nid);
+	struct zone *zone;
+	int i;
+
+	/* Walk all relevant zones and collect MOVABLE vs. KERNEL stats. */
+	if (nid == NUMA_NO_NODE) {
+		/* TODO: cache values */
+		for_each_populated_zone(zone)
+			auto_movable_stats_account_zone(&stats, zone);
+	} else {
+		for (i = 0; i < MAX_NR_ZONES; i++) {
+			zone = pgdat->node_zones + i;
+			if (populated_zone(zone))
+				auto_movable_stats_account_zone(&stats, zone);
+		}
+	}
+
+	kernel_early_pages = stats.kernel_early_pages;
+	movable_pages = stats.movable_pages;
+
+	/*
+	 * Kernel memory inside dynamic memory group allows for more MOVABLE
+	 * memory within the same group. Remove the effect of all but the
+	 * current group from the stats.
+	 */
+	walk_dynamic_memory_groups(nid, auto_movable_stats_account_group,
+				   group, &group_stats);
+	if (kernel_early_pages <= group_stats.req_kernel_early_pages)
+		return false;
+	kernel_early_pages -= group_stats.req_kernel_early_pages;
+	movable_pages -= group_stats.movable_pages;
+
+	if (group && group->is_dynamic)
+		kernel_early_pages += group->present_kernel_pages;
+
+	/*
+	 * Test if we could online the given number of pages to ZONE_MOVABLE
+	 * and still stay in the configured ratio.
+	 */
+	movable_pages += nr_pages;
+	return movable_pages <= (auto_movable_ratio * kernel_early_pages) / 100;
+}
+
 /*
  * Returns a default kernel memory zone for the given pfn range.
  * If no kernel zone covers this pfn range it will automatically go
@@ -684,6 +852,117 @@ static struct zone *default_kernel_zone_for_pfn(int nid, unsigned long start_pfn
 	return &pgdat->node_zones[ZONE_NORMAL];
 }
 
+/*
+ * Determine to which zone to online memory dynamically based on user
+ * configuration and system stats. We care about the following ratio:
+ *
+ *   MOVABLE : KERNEL
+ *
+ * Whereby MOVABLE is memory in ZONE_MOVABLE and KERNEL is memory in
+ * one of the kernel zones. CMA pages inside one of the kernel zones really
+ * behaves like ZONE_MOVABLE, so we treat them accordingly.
+ *
+ * We don't allow for hotplugged memory in a KERNEL zone to increase the
+ * amount of MOVABLE memory we can have, so we end up with:
+ *
+ *   MOVABLE : KERNEL_EARLY
+ *
+ * Whereby KERNEL_EARLY is memory in one of the kernel zones, available sinze
+ * boot. We base our calculation on KERNEL_EARLY internally, because:
+ *
+ * a) Hotplugged memory in one of the kernel zones can sometimes still get
+ *    hotunplugged, especially when hot(un)plugging individual memory blocks.
+ *    There is no coordination across memory devices, therefore "automatic"
+ *    hotunplugging, as implemented in hypervisors, could result in zone
+ *    imbalances.
+ * b) Early/boot memory in one of the kernel zones can usually not get
+ *    hotunplugged again (e.g., no firmware interface to unplug, fragmented
+ *    with unmovable allocations). While there are corner cases where it might
+ *    still work, it is barely relevant in practice.
+ *
+ * Exceptions are dynamic memory groups, which allow for more MOVABLE
+ * memory within the same memory group -- because in that case, there is
+ * coordination within the single memory device managed by a single driver.
+ *
+ * We rely on "present pages" instead of "managed pages", as the latter is
+ * highly unreliable and dynamic in virtualized environments, and does not
+ * consider boot time allocations. For example, memory ballooning adjusts the
+ * managed pages when inflating/deflating the balloon, and balloon compaction
+ * can even migrate inflated pages between zones.
+ *
+ * Using "present pages" is better but some things to keep in mind are:
+ *
+ * a) Some memblock allocations, such as for the crashkernel area, are
+ *    effectively unused by the kernel, yet they account to "present pages".
+ *    Fortunately, these allocations are comparatively small in relevant setups
+ *    (e.g., fraction of system memory).
+ * b) Some hotplugged memory blocks in virtualized environments, esecially
+ *    hotplugged by virtio-mem, look like they are completely present, however,
+ *    only parts of the memory block are actually currently usable.
+ *    "present pages" is an upper limit that can get reached at runtime. As
+ *    we base our calculations on KERNEL_EARLY, this is not an issue.
+ */
+static struct zone *auto_movable_zone_for_pfn(int nid,
+					      struct memory_group *group,
+					      unsigned long pfn,
+					      unsigned long nr_pages)
+{
+	unsigned long online_pages = 0, max_pages, end_pfn;
+	struct page *page;
+
+	if (!auto_movable_ratio)
+		goto kernel_zone;
+
+	if (group && !group->is_dynamic) {
+		max_pages = group->s.max_pages;
+		online_pages = group->present_movable_pages;
+
+		/* If anything is !MOVABLE online the rest !MOVABLE. */
+		if (group->present_kernel_pages)
+			goto kernel_zone;
+	} else if (!group || group->d.unit_pages == nr_pages) {
+		max_pages = nr_pages;
+	} else {
+		max_pages = group->d.unit_pages;
+		/*
+		 * Take a look at all online sections in the current unit.
+		 * We can safely assume that all pages within a section belong
+		 * to the same zone, because dynamic memory groups only deal
+		 * with hotplugged memory.
+		 */
+		pfn = ALIGN_DOWN(pfn, group->d.unit_pages);
+		end_pfn = pfn + group->d.unit_pages;
+		for (; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
+			page = pfn_to_online_page(pfn);
+			if (!page)
+				continue;
+			/* If anything is !MOVABLE online the rest !MOVABLE. */
+			if (page_zonenum(page) != ZONE_MOVABLE)
+				goto kernel_zone;
+			online_pages += PAGES_PER_SECTION;
+		}
+	}
+
+	/*
+	 * Online MOVABLE if we could *currently* online all remaining parts
+	 * MOVABLE. We expect to (add+) online them immediately next, so if
+	 * nobody interferes, all will be MOVABLE if possible.
+	 */
+	nr_pages = max_pages - online_pages;
+	if (!auto_movable_can_online_movable(NUMA_NO_NODE, group, nr_pages))
+		goto kernel_zone;
+
+#ifdef CONFIG_NUMA
+	if (auto_movable_numa_aware &&
+	    !auto_movable_can_online_movable(nid, group, nr_pages))
+		goto kernel_zone;
+#endif /* CONFIG_NUMA */
+
+	return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
+kernel_zone:
+	return default_kernel_zone_for_pfn(nid, pfn, nr_pages);
+}
+
 static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn,
 		unsigned long nr_pages)
 {
@@ -708,7 +987,8 @@ static inline struct zone *default_zone_for_pfn(int nid, unsigned long start_pfn
 	return movable_node_enabled ? movable_zone : kernel_zone;
 }
 
-struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
+struct zone *zone_for_pfn_range(int online_type, int nid,
+		struct memory_group *group, unsigned long start_pfn,
 		unsigned long nr_pages)
 {
 	if (online_type == MMOP_ONLINE_KERNEL)
@@ -717,6 +997,9 @@ struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
 	if (online_type == MMOP_ONLINE_MOVABLE)
 		return &NODE_DATA(nid)->node_zones[ZONE_MOVABLE];
 
+	if (online_policy == ONLINE_POLICY_AUTO_MOVABLE)
+		return auto_movable_zone_for_pfn(nid, group, start_pfn, nr_pages);
+
 	return default_zone_for_pfn(nid, start_pfn, nr_pages);
 }
 
@@ -724,10 +1007,25 @@ struct zone *zone_for_pfn_range(int online_type, int nid, unsigned start_pfn,
  * This function should only be called by memory_block_{online,offline},
  * and {online,offline}_pages.
  */
-void adjust_present_page_count(struct zone *zone, long nr_pages)
+void adjust_present_page_count(struct page *page, struct memory_group *group,
+			       long nr_pages)
 {
+	struct zone *zone = page_zone(page);
+	const bool movable = zone_idx(zone) == ZONE_MOVABLE;
+
+	/*
+	 * We only support onlining/offlining/adding/removing of complete
+	 * memory blocks; therefore, either all is either early or hotplugged.
+	 */
+	if (early_section(__pfn_to_section(page_to_pfn(page))))
+		zone->present_early_pages += nr_pages;
 	zone->present_pages += nr_pages;
 	zone->zone_pgdat->node_present_pages += nr_pages;
+
+	if (group && movable)
+		group->present_movable_pages += nr_pages;
+	else if (group && !movable)
+		group->present_kernel_pages += nr_pages;
 }
 
 int mhp_init_memmap_on_memory(unsigned long pfn, unsigned long nr_pages,
@@ -773,7 +1071,8 @@ void mhp_deinit_memmap_on_memory(unsigned long pfn, unsigned long nr_pages)
 	kasan_remove_zero_shadow(__va(PFN_PHYS(pfn)), PFN_PHYS(nr_pages));
 }
 
-int __ref online_pages(unsigned long pfn, unsigned long nr_pages, struct zone *zone)
+int __ref online_pages(unsigned long pfn, unsigned long nr_pages,
+		       struct zone *zone, struct memory_group *group)
 {
 	unsigned long flags;
 	int need_zonelists_rebuild = 0;
@@ -826,7 +1125,7 @@ int __ref online_pages(unsigned long pfn, unsigned long nr_pages, struct zone *z
 	}
 
 	online_pages_range(pfn, nr_pages);
-	adjust_present_page_count(zone, nr_pages);
+	adjust_present_page_count(pfn_to_page(pfn), group, nr_pages);
 
 	node_states_set_node(nid, &arg);
 	if (need_zonelists_rebuild)
@@ -1059,6 +1358,7 @@ int __ref add_memory_resource(int nid, struct resource *res, mhp_t mhp_flags)
 {
 	struct mhp_params params = { .pgprot = pgprot_mhp(PAGE_KERNEL) };
 	struct vmem_altmap mhp_altmap = {};
+	struct memory_group *group = NULL;
 	u64 start, size;
 	bool new_node = false;
 	int ret;
@@ -1070,6 +1370,13 @@ int __ref add_memory_resource(int nid, struct resource *res, mhp_t mhp_flags)
 	if (ret)
 		return ret;
 
+	if (mhp_flags & MHP_NID_IS_MGID) {
+		group = memory_group_find_by_id(nid);
+		if (!group)
+			return -EINVAL;
+		nid = group->nid;
+	}
+
 	if (!node_possible(nid)) {
 		WARN(1, "node %d was absent from the node_possible_map\n", nid);
 		return -EINVAL;
@@ -1104,9 +1411,10 @@ int __ref add_memory_resource(int nid, struct resource *res, mhp_t mhp_flags)
 		goto error;
 
 	/* create memory block devices after memory was added */
-	ret = create_memory_block_devices(start, size, mhp_altmap.alloc);
+	ret = create_memory_block_devices(start, size, mhp_altmap.alloc,
+					  group);
 	if (ret) {
-		arch_remove_memory(nid, start, size, NULL);
+		arch_remove_memory(start, size, NULL);
 		goto error;
 	}
 
@@ -1298,7 +1606,7 @@ struct zone *test_pages_in_a_zone(unsigned long start_pfn,
 	unsigned long pfn, sec_end_pfn;
 	struct zone *zone = NULL;
 	struct page *page;
-	int i;
+
 	for (pfn = start_pfn, sec_end_pfn = SECTION_ALIGN_UP(start_pfn + 1);
 	     pfn < end_pfn;
 	     pfn = sec_end_pfn, sec_end_pfn += PAGES_PER_SECTION) {
@@ -1307,17 +1615,10 @@ struct zone *test_pages_in_a_zone(unsigned long start_pfn,
 			continue;
 		for (; pfn < sec_end_pfn && pfn < end_pfn;
 		     pfn += MAX_ORDER_NR_PAGES) {
-			i = 0;
-			/* This is just a CONFIG_HOLES_IN_ZONE check.*/
-			while ((i < MAX_ORDER_NR_PAGES) &&
-				!pfn_valid_within(pfn + i))
-				i++;
-			if (i == MAX_ORDER_NR_PAGES || pfn + i >= end_pfn)
-				continue;
 			/* Check if we got outside of the zone */
-			if (zone && !zone_spans_pfn(zone, pfn + i))
+			if (zone && !zone_spans_pfn(zone, pfn))
 				return NULL;
-			page = pfn_to_page(pfn + i);
+			page = pfn_to_page(pfn);
 			if (zone && page_zone(page) != zone)
 				return NULL;
 			zone = page_zone(page);
@@ -1568,7 +1869,8 @@ static int count_system_ram_pages_cb(unsigned long start_pfn,
 	return 0;
 }
 
-int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
+int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages,
+			struct memory_group *group)
 {
 	const unsigned long end_pfn = start_pfn + nr_pages;
 	unsigned long pfn, system_ram_pages = 0;
@@ -1704,7 +2006,7 @@ int __ref offline_pages(unsigned long start_pfn, unsigned long nr_pages)
 
 	/* removal success */
 	adjust_managed_page_count(pfn_to_page(start_pfn), -nr_pages);
-	adjust_present_page_count(zone, -nr_pages);
+	adjust_present_page_count(pfn_to_page(start_pfn), group, -nr_pages);
 
 	/* reinitialise watermarks and update pcp limits */
 	init_per_zone_wmark_min();
@@ -1746,7 +2048,9 @@ failed_removal:
 static int check_memblock_offlined_cb(struct memory_block *mem, void *arg)
 {
 	int ret = !is_memblock_offlined(mem);
+	int *nid = arg;
 
+	*nid = mem->nid;
 	if (unlikely(ret)) {
 		phys_addr_t beginpa, endpa;
 
@@ -1839,12 +2143,12 @@ void try_offline_node(int nid)
 }
 EXPORT_SYMBOL(try_offline_node);
 
-static int __ref try_remove_memory(int nid, u64 start, u64 size)
+static int __ref try_remove_memory(u64 start, u64 size)
 {
-	int rc = 0;
 	struct vmem_altmap mhp_altmap = {};
 	struct vmem_altmap *altmap = NULL;
 	unsigned long nr_vmemmap_pages;
+	int rc = 0, nid = NUMA_NO_NODE;
 
 	BUG_ON(check_hotplug_memory_range(start, size));
 
@@ -1852,8 +2156,12 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
 	 * All memory blocks must be offlined before removing memory.  Check
 	 * whether all memory blocks in question are offline and return error
 	 * if this is not the case.
+	 *
+	 * While at it, determine the nid. Note that if we'd have mixed nodes,
+	 * we'd only try to offline the last determined one -- which is good
+	 * enough for the cases we care about.
 	 */
-	rc = walk_memory_blocks(start, size, NULL, check_memblock_offlined_cb);
+	rc = walk_memory_blocks(start, size, &nid, check_memblock_offlined_cb);
 	if (rc)
 		return rc;
 
@@ -1893,7 +2201,7 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
 
 	mem_hotplug_begin();
 
-	arch_remove_memory(nid, start, size, altmap);
+	arch_remove_memory(start, size, altmap);
 
 	if (IS_ENABLED(CONFIG_ARCH_KEEP_MEMBLOCK)) {
 		memblock_free(start, size);
@@ -1902,7 +2210,8 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
 
 	release_mem_region_adjustable(start, size);
 
-	try_offline_node(nid);
+	if (nid != NUMA_NO_NODE)
+		try_offline_node(nid);
 
 	mem_hotplug_done();
 	return 0;
@@ -1910,7 +2219,6 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
 
 /**
  * __remove_memory - Remove memory if every memory block is offline
- * @nid: the node ID
  * @start: physical address of the region to remove
  * @size: size of the region to remove
  *
@@ -1918,14 +2226,14 @@ static int __ref try_remove_memory(int nid, u64 start, u64 size)
  * and online/offline operations before this call, as required by
  * try_offline_node().
  */
-void __remove_memory(int nid, u64 start, u64 size)
+void __remove_memory(u64 start, u64 size)
 {
 
 	/*
 	 * trigger BUG() if some memory is not offlined prior to calling this
 	 * function
 	 */
-	if (try_remove_memory(nid, start, size))
+	if (try_remove_memory(start, size))
 		BUG();
 }
 
@@ -1933,12 +2241,12 @@ void __remove_memory(int nid, u64 start, u64 size)
  * Remove memory if every memory block is offline, otherwise return -EBUSY is
  * some memory is not offline
  */
-int remove_memory(int nid, u64 start, u64 size)
+int remove_memory(u64 start, u64 size)
 {
 	int rc;
 
 	lock_device_hotplug();
-	rc  = try_remove_memory(nid, start, size);
+	rc = try_remove_memory(start, size);
 	unlock_device_hotplug();
 
 	return rc;
@@ -1998,7 +2306,7 @@ static int try_reonline_memory_block(struct memory_block *mem, void *arg)
  * unplugged all memory (so it's no longer in use) and want to offline + remove
  * that memory.
  */
-int offline_and_remove_memory(int nid, u64 start, u64 size)
+int offline_and_remove_memory(u64 start, u64 size)
 {
 	const unsigned long mb_count = size / memory_block_size_bytes();
 	uint8_t *online_types, *tmp;
@@ -2034,7 +2342,7 @@ int offline_and_remove_memory(int nid, u64 start, u64 size)
 	 * This cannot fail as it cannot get onlined in the meantime.
 	 */
 	if (!rc) {
-		rc = try_remove_memory(nid, start, size);
+		rc = try_remove_memory(start, size);
 		if (rc)
 			pr_err("%s: Failed to remove memory: %d", __func__, rc);
 	}
diff --git a/mm/mempolicy.c b/mm/mempolicy.c
index 5e90b3fb7794..1592b081c58e 100644
--- a/mm/mempolicy.c
+++ b/mm/mempolicy.c
@@ -1362,16 +1362,33 @@ mpol_out:
 /*
  * User space interface with variable sized bitmaps for nodelists.
  */
+static int get_bitmap(unsigned long *mask, const unsigned long __user *nmask,
+		      unsigned long maxnode)
+{
+	unsigned long nlongs = BITS_TO_LONGS(maxnode);
+	int ret;
+
+	if (in_compat_syscall())
+		ret = compat_get_bitmap(mask,
+					(const compat_ulong_t __user *)nmask,
+					maxnode);
+	else
+		ret = copy_from_user(mask, nmask,
+				     nlongs * sizeof(unsigned long));
+
+	if (ret)
+		return -EFAULT;
+
+	if (maxnode % BITS_PER_LONG)
+		mask[nlongs - 1] &= (1UL << (maxnode % BITS_PER_LONG)) - 1;
+
+	return 0;
+}
 
 /* Copy a node mask from user space. */
 static int get_nodes(nodemask_t *nodes, const unsigned long __user *nmask,
 		     unsigned long maxnode)
 {
-	unsigned long k;
-	unsigned long t;
-	unsigned long nlongs;
-	unsigned long endmask;
-
 	--maxnode;
 	nodes_clear(*nodes);
 	if (maxnode == 0 || !nmask)
@@ -1379,49 +1396,29 @@ static int get_nodes(nodemask_t *nodes, const unsigned long __user *nmask,
 	if (maxnode > PAGE_SIZE*BITS_PER_BYTE)
 		return -EINVAL;
 
-	nlongs = BITS_TO_LONGS(maxnode);
-	if ((maxnode % BITS_PER_LONG) == 0)
-		endmask = ~0UL;
-	else
-		endmask = (1UL << (maxnode % BITS_PER_LONG)) - 1;
-
 	/*
 	 * When the user specified more nodes than supported just check
-	 * if the non supported part is all zero.
-	 *
-	 * If maxnode have more longs than MAX_NUMNODES, check
-	 * the bits in that area first. And then go through to
-	 * check the rest bits which equal or bigger than MAX_NUMNODES.
-	 * Otherwise, just check bits [MAX_NUMNODES, maxnode).
+	 * if the non supported part is all zero, one word at a time,
+	 * starting at the end.
 	 */
-	if (nlongs > BITS_TO_LONGS(MAX_NUMNODES)) {
-		for (k = BITS_TO_LONGS(MAX_NUMNODES); k < nlongs; k++) {
-			if (get_user(t, nmask + k))
-				return -EFAULT;
-			if (k == nlongs - 1) {
-				if (t & endmask)
-					return -EINVAL;
-			} else if (t)
-				return -EINVAL;
-		}
-		nlongs = BITS_TO_LONGS(MAX_NUMNODES);
-		endmask = ~0UL;
-	}
+	while (maxnode > MAX_NUMNODES) {
+		unsigned long bits = min_t(unsigned long, maxnode, BITS_PER_LONG);
+		unsigned long t;
 
-	if (maxnode > MAX_NUMNODES && MAX_NUMNODES % BITS_PER_LONG != 0) {
-		unsigned long valid_mask = endmask;
-
-		valid_mask &= ~((1UL << (MAX_NUMNODES % BITS_PER_LONG)) - 1);
-		if (get_user(t, nmask + nlongs - 1))
+		if (get_bitmap(&t, &nmask[maxnode / BITS_PER_LONG], bits))
 			return -EFAULT;
-		if (t & valid_mask)
+
+		if (maxnode - bits >= MAX_NUMNODES) {
+			maxnode -= bits;
+		} else {
+			maxnode = MAX_NUMNODES;
+			t &= ~((1UL << (MAX_NUMNODES % BITS_PER_LONG)) - 1);
+		}
+		if (t)
 			return -EINVAL;
 	}
 
-	if (copy_from_user(nodes_addr(*nodes), nmask, nlongs*sizeof(unsigned long)))
-		return -EFAULT;
-	nodes_addr(*nodes)[nlongs-1] &= endmask;
-	return 0;
+	return get_bitmap(nodes_addr(*nodes), nmask, maxnode);
 }
 
 /* Copy a kernel node mask to user space */
@@ -1430,6 +1427,10 @@ static int copy_nodes_to_user(unsigned long __user *mask, unsigned long maxnode,
 {
 	unsigned long copy = ALIGN(maxnode-1, 64) / 8;
 	unsigned int nbytes = BITS_TO_LONGS(nr_node_ids) * sizeof(long);
+	bool compat = in_compat_syscall();
+
+	if (compat)
+		nbytes = BITS_TO_COMPAT_LONGS(nr_node_ids) * sizeof(compat_long_t);
 
 	if (copy > nbytes) {
 		if (copy > PAGE_SIZE)
@@ -1437,7 +1438,13 @@ static int copy_nodes_to_user(unsigned long __user *mask, unsigned long maxnode,
 		if (clear_user((char __user *)mask + nbytes, copy - nbytes))
 			return -EFAULT;
 		copy = nbytes;
+		maxnode = nr_node_ids;
 	}
+
+	if (compat)
+		return compat_put_bitmap((compat_ulong_t __user *)mask,
+					 nodes_addr(*nodes), maxnode);
+
 	return copy_to_user(mask, nodes_addr(*nodes), copy) ? -EFAULT : 0;
 }
 
@@ -1642,116 +1649,6 @@ SYSCALL_DEFINE5(get_mempolicy, int __user *, policy,
 	return kernel_get_mempolicy(policy, nmask, maxnode, addr, flags);
 }
 
-#ifdef CONFIG_COMPAT
-
-COMPAT_SYSCALL_DEFINE5(get_mempolicy, int __user *, policy,
-		       compat_ulong_t __user *, nmask,
-		       compat_ulong_t, maxnode,
-		       compat_ulong_t, addr, compat_ulong_t, flags)
-{
-	long err;
-	unsigned long __user *nm = NULL;
-	unsigned long nr_bits, alloc_size;
-	DECLARE_BITMAP(bm, MAX_NUMNODES);
-
-	nr_bits = min_t(unsigned long, maxnode-1, nr_node_ids);
-	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
-
-	if (nmask)
-		nm = compat_alloc_user_space(alloc_size);
-
-	err = kernel_get_mempolicy(policy, nm, nr_bits+1, addr, flags);
-
-	if (!err && nmask) {
-		unsigned long copy_size;
-		copy_size = min_t(unsigned long, sizeof(bm), alloc_size);
-		err = copy_from_user(bm, nm, copy_size);
-		/* ensure entire bitmap is zeroed */
-		err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8);
-		err |= compat_put_bitmap(nmask, bm, nr_bits);
-	}
-
-	return err;
-}
-
-COMPAT_SYSCALL_DEFINE3(set_mempolicy, int, mode, compat_ulong_t __user *, nmask,
-		       compat_ulong_t, maxnode)
-{
-	unsigned long __user *nm = NULL;
-	unsigned long nr_bits, alloc_size;
-	DECLARE_BITMAP(bm, MAX_NUMNODES);
-
-	nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES);
-	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
-
-	if (nmask) {
-		if (compat_get_bitmap(bm, nmask, nr_bits))
-			return -EFAULT;
-		nm = compat_alloc_user_space(alloc_size);
-		if (copy_to_user(nm, bm, alloc_size))
-			return -EFAULT;
-	}
-
-	return kernel_set_mempolicy(mode, nm, nr_bits+1);
-}
-
-COMPAT_SYSCALL_DEFINE6(mbind, compat_ulong_t, start, compat_ulong_t, len,
-		       compat_ulong_t, mode, compat_ulong_t __user *, nmask,
-		       compat_ulong_t, maxnode, compat_ulong_t, flags)
-{
-	unsigned long __user *nm = NULL;
-	unsigned long nr_bits, alloc_size;
-	nodemask_t bm;
-
-	nr_bits = min_t(unsigned long, maxnode-1, MAX_NUMNODES);
-	alloc_size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
-
-	if (nmask) {
-		if (compat_get_bitmap(nodes_addr(bm), nmask, nr_bits))
-			return -EFAULT;
-		nm = compat_alloc_user_space(alloc_size);
-		if (copy_to_user(nm, nodes_addr(bm), alloc_size))
-			return -EFAULT;
-	}
-
-	return kernel_mbind(start, len, mode, nm, nr_bits+1, flags);
-}
-
-COMPAT_SYSCALL_DEFINE4(migrate_pages, compat_pid_t, pid,
-		       compat_ulong_t, maxnode,
-		       const compat_ulong_t __user *, old_nodes,
-		       const compat_ulong_t __user *, new_nodes)
-{
-	unsigned long __user *old = NULL;
-	unsigned long __user *new = NULL;
-	nodemask_t tmp_mask;
-	unsigned long nr_bits;
-	unsigned long size;
-
-	nr_bits = min_t(unsigned long, maxnode - 1, MAX_NUMNODES);
-	size = ALIGN(nr_bits, BITS_PER_LONG) / 8;
-	if (old_nodes) {
-		if (compat_get_bitmap(nodes_addr(tmp_mask), old_nodes, nr_bits))
-			return -EFAULT;
-		old = compat_alloc_user_space(new_nodes ? size * 2 : size);
-		if (new_nodes)
-			new = old + size / sizeof(unsigned long);
-		if (copy_to_user(old, nodes_addr(tmp_mask), size))
-			return -EFAULT;
-	}
-	if (new_nodes) {
-		if (compat_get_bitmap(nodes_addr(tmp_mask), new_nodes, nr_bits))
-			return -EFAULT;
-		if (new == NULL)
-			new = compat_alloc_user_space(size);
-		if (copy_to_user(new, nodes_addr(tmp_mask), size))
-			return -EFAULT;
-	}
-	return kernel_migrate_pages(pid, nr_bits + 1, old, new);
-}
-
-#endif /* CONFIG_COMPAT */
-
 bool vma_migratable(struct vm_area_struct *vma)
 {
 	if (vma->vm_flags & (VM_IO | VM_PFNMAP))
@@ -1979,17 +1876,26 @@ unsigned int mempolicy_slab_node(void)
  */
 static unsigned offset_il_node(struct mempolicy *pol, unsigned long n)
 {
-	unsigned nnodes = nodes_weight(pol->nodes);
-	unsigned target;
+	nodemask_t nodemask = pol->nodes;
+	unsigned int target, nnodes;
 	int i;
 	int nid;
+	/*
+	 * The barrier will stabilize the nodemask in a register or on
+	 * the stack so that it will stop changing under the code.
+	 *
+	 * Between first_node() and next_node(), pol->nodes could be changed
+	 * by other threads. So we put pol->nodes in a local stack.
+	 */
+	barrier();
 
+	nnodes = nodes_weight(nodemask);
 	if (!nnodes)
 		return numa_node_id();
 	target = (unsigned int)n % nnodes;
-	nid = first_node(pol->nodes);
+	nid = first_node(nodemask);
 	for (i = 0; i < target; i++)
-		nid = next_node(nid, pol->nodes);
+		nid = next_node(nid, nodemask);
 	return nid;
 }
 
diff --git a/mm/memremap.c b/mm/memremap.c
index 15a074ffb8d7..ed593bf87109 100644
--- a/mm/memremap.c
+++ b/mm/memremap.c
@@ -140,14 +140,11 @@ static void pageunmap_range(struct dev_pagemap *pgmap, int range_id)
 {
 	struct range *range = &pgmap->ranges[range_id];
 	struct page *first_page;
-	int nid;
 
 	/* make sure to access a memmap that was actually initialized */
 	first_page = pfn_to_page(pfn_first(pgmap, range_id));
 
 	/* pages are dead and unused, undo the arch mapping */
-	nid = page_to_nid(first_page);
-
 	mem_hotplug_begin();
 	remove_pfn_range_from_zone(page_zone(first_page), PHYS_PFN(range->start),
 				   PHYS_PFN(range_len(range)));
@@ -155,7 +152,7 @@ static void pageunmap_range(struct dev_pagemap *pgmap, int range_id)
 		__remove_pages(PHYS_PFN(range->start),
 			       PHYS_PFN(range_len(range)), NULL);
 	} else {
-		arch_remove_memory(nid, range->start, range_len(range),
+		arch_remove_memory(range->start, range_len(range),
 				pgmap_altmap(pgmap));
 		kasan_remove_zero_shadow(__va(range->start), range_len(range));
 	}
diff --git a/mm/migrate.c b/mm/migrate.c
index a0aeb3fe46a7..a6a7743ee98f 100644
--- a/mm/migrate.c
+++ b/mm/migrate.c
@@ -960,7 +960,7 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
 				int force, enum migrate_mode mode)
 {
 	int rc = -EAGAIN;
-	int page_was_mapped = 0;
+	bool page_was_mapped = false;
 	struct anon_vma *anon_vma = NULL;
 	bool is_lru = !__PageMovable(page);
 
@@ -1008,7 +1008,7 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
 	}
 
 	/*
-	 * By try_to_unmap(), page->mapcount goes down to 0 here. In this case,
+	 * By try_to_migrate(), page->mapcount goes down to 0 here. In this case,
 	 * we cannot notice that anon_vma is freed while we migrates a page.
 	 * This get_anon_vma() delays freeing anon_vma pointer until the end
 	 * of migration. File cache pages are no problem because of page_lock()
@@ -1063,7 +1063,7 @@ static int __unmap_and_move(struct page *page, struct page *newpage,
 		VM_BUG_ON_PAGE(PageAnon(page) && !PageKsm(page) && !anon_vma,
 				page);
 		try_to_migrate(page, 0);
-		page_was_mapped = 1;
+		page_was_mapped = true;
 	}
 
 	if (!page_mapped(page))
@@ -1900,6 +1900,23 @@ set_status:
 	mmap_read_unlock(mm);
 }
 
+static int get_compat_pages_array(const void __user *chunk_pages[],
+				  const void __user * __user *pages,
+				  unsigned long chunk_nr)
+{
+	compat_uptr_t __user *pages32 = (compat_uptr_t __user *)pages;
+	compat_uptr_t p;
+	int i;
+
+	for (i = 0; i < chunk_nr; i++) {
+		if (get_user(p, pages32 + i))
+			return -EFAULT;
+		chunk_pages[i] = compat_ptr(p);
+	}
+
+	return 0;
+}
+
 /*
  * Determine the nodes of a user array of pages and store it in
  * a user array of status.
@@ -1919,8 +1936,15 @@ static int do_pages_stat(struct mm_struct *mm, unsigned long nr_pages,
 		if (chunk_nr > DO_PAGES_STAT_CHUNK_NR)
 			chunk_nr = DO_PAGES_STAT_CHUNK_NR;
 
-		if (copy_from_user(chunk_pages, pages, chunk_nr * sizeof(*chunk_pages)))
-			break;
+		if (in_compat_syscall()) {
+			if (get_compat_pages_array(chunk_pages, pages,
+						   chunk_nr))
+				break;
+		} else {
+			if (copy_from_user(chunk_pages, pages,
+				      chunk_nr * sizeof(*chunk_pages)))
+				break;
+		}
 
 		do_pages_stat_array(mm, chunk_nr, chunk_pages, chunk_status);
 
@@ -2023,28 +2047,6 @@ SYSCALL_DEFINE6(move_pages, pid_t, pid, unsigned long, nr_pages,
 	return kernel_move_pages(pid, nr_pages, pages, nodes, status, flags);
 }
 
-#ifdef CONFIG_COMPAT
-COMPAT_SYSCALL_DEFINE6(move_pages, pid_t, pid, compat_ulong_t, nr_pages,
-		       compat_uptr_t __user *, pages32,
-		       const int __user *, nodes,
-		       int __user *, status,
-		       int, flags)
-{
-	const void __user * __user *pages;
-	int i;
-
-	pages = compat_alloc_user_space(nr_pages * sizeof(void *));
-	for (i = 0; i < nr_pages; i++) {
-		compat_uptr_t p;
-
-		if (get_user(p, pages32 + i) ||
-			put_user(compat_ptr(p), pages + i))
-			return -EFAULT;
-	}
-	return kernel_move_pages(pid, nr_pages, pages, nodes, status, flags);
-}
-#endif /* CONFIG_COMPAT */
-
 #ifdef CONFIG_NUMA_BALANCING
 /*
  * Returns true if this is a safe migration target node for misplaced NUMA
@@ -2107,6 +2109,7 @@ out:
 static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
 {
 	int page_lru;
+	int nr_pages = thp_nr_pages(page);
 
 	VM_BUG_ON_PAGE(compound_order(page) && !PageTransHuge(page), page);
 
@@ -2115,7 +2118,7 @@ static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
 		return 0;
 
 	/* Avoid migrating to a node that is nearly full */
-	if (!migrate_balanced_pgdat(pgdat, compound_nr(page)))
+	if (!migrate_balanced_pgdat(pgdat, nr_pages))
 		return 0;
 
 	if (isolate_lru_page(page))
@@ -2123,7 +2126,7 @@ static int numamigrate_isolate_page(pg_data_t *pgdat, struct page *page)
 
 	page_lru = page_is_file_lru(page);
 	mod_node_page_state(page_pgdat(page), NR_ISOLATED_ANON + page_lru,
-				thp_nr_pages(page));
+			    nr_pages);
 
 	/*
 	 * Isolating the page has taken another reference, so the
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index f95e1d2386a1..b37435c274cf 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -594,8 +594,6 @@ static int page_outside_zone_boundaries(struct zone *zone, struct page *page)
 
 static int page_is_consistent(struct zone *zone, struct page *page)
 {
-	if (!pfn_valid_within(page_to_pfn(page)))
-		return 0;
 	if (zone != page_zone(page))
 		return 0;
 
@@ -1025,16 +1023,12 @@ buddy_merge_likely(unsigned long pfn, unsigned long buddy_pfn,
 	if (order >= MAX_ORDER - 2)
 		return false;
 
-	if (!pfn_valid_within(buddy_pfn))
-		return false;
-
 	combined_pfn = buddy_pfn & pfn;
 	higher_page = page + (combined_pfn - pfn);
 	buddy_pfn = __find_buddy_pfn(combined_pfn, order + 1);
 	higher_buddy = higher_page + (buddy_pfn - combined_pfn);
 
-	return pfn_valid_within(buddy_pfn) &&
-	       page_is_buddy(higher_page, higher_buddy, order + 1);
+	return page_is_buddy(higher_page, higher_buddy, order + 1);
 }
 
 /*
@@ -1095,8 +1089,6 @@ continue_merging:
 		buddy_pfn = __find_buddy_pfn(pfn, order);
 		buddy = page + (buddy_pfn - pfn);
 
-		if (!pfn_valid_within(buddy_pfn))
-			goto done_merging;
 		if (!page_is_buddy(page, buddy, order))
 			goto done_merging;
 		/*
@@ -1754,9 +1746,7 @@ void __init memblock_free_pages(struct page *page, unsigned long pfn,
 /*
  * Check that the whole (or subset of) a pageblock given by the interval of
  * [start_pfn, end_pfn) is valid and within the same zone, before scanning it
- * with the migration of free compaction scanner. The scanners then need to
- * use only pfn_valid_within() check for arches that allow holes within
- * pageblocks.
+ * with the migration of free compaction scanner.
  *
  * Return struct page pointer of start_pfn, or NULL if checks were not passed.
  *
@@ -1872,8 +1862,6 @@ static inline void __init pgdat_init_report_one_done(void)
  */
 static inline bool __init deferred_pfn_valid(unsigned long pfn)
 {
-	if (!pfn_valid_within(pfn))
-		return false;
 	if (!(pfn & (pageblock_nr_pages - 1)) && !pfn_valid(pfn))
 		return false;
 	return true;
@@ -2520,11 +2508,6 @@ static int move_freepages(struct zone *zone,
 	int pages_moved = 0;
 
 	for (pfn = start_pfn; pfn <= end_pfn;) {
-		if (!pfn_valid_within(pfn)) {
-			pfn++;
-			continue;
-		}
-
 		page = pfn_to_page(pfn);
 		if (!PageBuddy(page)) {
 			/*
@@ -3445,8 +3428,10 @@ void free_unref_page_list(struct list_head *list)
 	/* Prepare pages for freeing */
 	list_for_each_entry_safe(page, next, list, lru) {
 		pfn = page_to_pfn(page);
-		if (!free_unref_page_prepare(page, pfn, 0))
+		if (!free_unref_page_prepare(page, pfn, 0)) {
 			list_del(&page->lru);
+			continue;
+		}
 
 		/*
 		 * Free isolated pages directly to the allocator, see
@@ -7271,6 +7256,9 @@ static void __init calculate_node_totalpages(struct pglist_data *pgdat,
 			zone->zone_start_pfn = 0;
 		zone->spanned_pages = size;
 		zone->present_pages = real_size;
+#if defined(CONFIG_MEMORY_HOTPLUG)
+		zone->present_early_pages = real_size;
+#endif
 
 		totalpages += size;
 		realtotalpages += real_size;
@@ -8828,9 +8816,6 @@ struct page *has_unmovable_pages(struct zone *zone, struct page *page,
 	}
 
 	for (; iter < pageblock_nr_pages - offset; iter++) {
-		if (!pfn_valid_within(pfn + iter))
-			continue;
-
 		page = pfn_to_page(pfn + iter);
 
 		/*
diff --git a/mm/page_ext.c b/mm/page_ext.c
index 293b2685fc48..dfb91653d359 100644
--- a/mm/page_ext.c
+++ b/mm/page_ext.c
@@ -58,11 +58,21 @@
  * can utilize this callback to initialize the state of it correctly.
  */
 
+#if defined(CONFIG_PAGE_IDLE_FLAG) && !defined(CONFIG_64BIT)
+static bool need_page_idle(void)
+{
+	return true;
+}
+struct page_ext_operations page_idle_ops = {
+	.need = need_page_idle,
+};
+#endif
+
 static struct page_ext_operations *page_ext_ops[] = {
 #ifdef CONFIG_PAGE_OWNER
 	&page_owner_ops,
 #endif
-#if defined(CONFIG_IDLE_PAGE_TRACKING) && !defined(CONFIG_64BIT)
+#if defined(CONFIG_PAGE_IDLE_FLAG) && !defined(CONFIG_64BIT)
 	&page_idle_ops,
 #endif
 };
diff --git a/mm/page_idle.c b/mm/page_idle.c
index 64e5344a992c..edead6a8a5f9 100644
--- a/mm/page_idle.c
+++ b/mm/page_idle.c
@@ -207,16 +207,6 @@ static const struct attribute_group page_idle_attr_group = {
 	.name = "page_idle",
 };
 
-#ifndef CONFIG_64BIT
-static bool need_page_idle(void)
-{
-	return true;
-}
-struct page_ext_operations page_idle_ops = {
-	.need = need_page_idle,
-};
-#endif
-
 static int __init page_idle_init(void)
 {
 	int err;
diff --git a/mm/page_isolation.c b/mm/page_isolation.c
index fff55bb830f9..a95c2c6562d0 100644
--- a/mm/page_isolation.c
+++ b/mm/page_isolation.c
@@ -93,8 +93,7 @@ static void unset_migratetype_isolate(struct page *page, unsigned migratetype)
 			buddy_pfn = __find_buddy_pfn(pfn, order);
 			buddy = page + (buddy_pfn - pfn);
 
-			if (pfn_valid_within(buddy_pfn) &&
-			    !is_migrate_isolate_page(buddy)) {
+			if (!is_migrate_isolate_page(buddy)) {
 				__isolate_free_page(page, order);
 				isolated_page = true;
 			}
@@ -250,10 +249,6 @@ __test_page_isolated_in_pageblock(unsigned long pfn, unsigned long end_pfn,
 	struct page *page;
 
 	while (pfn < end_pfn) {
-		if (!pfn_valid_within(pfn)) {
-			pfn++;
-			continue;
-		}
 		page = pfn_to_page(pfn);
 		if (PageBuddy(page))
 			/*
diff --git a/mm/page_owner.c b/mm/page_owner.c
index f51a57e92aa3..62402d22539b 100644
--- a/mm/page_owner.c
+++ b/mm/page_owner.c
@@ -276,9 +276,6 @@ void pagetypeinfo_showmixedcount_print(struct seq_file *m,
 		pageblock_mt = get_pageblock_migratetype(page);
 
 		for (; pfn < block_end_pfn; pfn++) {
-			if (!pfn_valid_within(pfn))
-				continue;
-
 			/* The pageblock is online, no need to recheck. */
 			page = pfn_to_page(pfn);
 
@@ -479,10 +476,6 @@ read_page_owner(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 			continue;
 		}
 
-		/* Check for holes within a MAX_ORDER area */
-		if (!pfn_valid_within(pfn))
-			continue;
-
 		page = pfn_to_page(pfn);
 		if (PageBuddy(page)) {
 			unsigned long freepage_order = buddy_order_unsafe(page);
@@ -560,14 +553,9 @@ static void init_pages_in_zone(pg_data_t *pgdat, struct zone *zone)
 		block_end_pfn = min(block_end_pfn, end_pfn);
 
 		for (; pfn < block_end_pfn; pfn++) {
-			struct page *page;
+			struct page *page = pfn_to_page(pfn);
 			struct page_ext *page_ext;
 
-			if (!pfn_valid_within(pfn))
-				continue;
-
-			page = pfn_to_page(pfn);
-
 			if (page_zone(page) != zone)
 				continue;
 
diff --git a/mm/percpu.c b/mm/percpu.c
index e1c20837a42a..e0a986818903 100644
--- a/mm/percpu.c
+++ b/mm/percpu.c
@@ -146,7 +146,6 @@ static unsigned int pcpu_high_unit_cpu __ro_after_init;
 
 /* the address of the first chunk which starts with the kernel static area */
 void *pcpu_base_addr __ro_after_init;
-EXPORT_SYMBOL_GPL(pcpu_base_addr);
 
 static const int *pcpu_unit_map __ro_after_init;		/* cpu -> unit */
 const unsigned long *pcpu_unit_offsets __ro_after_init;	/* cpu -> unit offset */
diff --git a/mm/rmap.c b/mm/rmap.c
index 2d29a57d29e8..6aebd1747251 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -1231,11 +1231,13 @@ void page_add_file_rmap(struct page *page, bool compound)
 						nr_pages);
 	} else {
 		if (PageTransCompound(page) && page_mapping(page)) {
+			struct page *head = compound_head(page);
+
 			VM_WARN_ON_ONCE(!PageLocked(page));
 
-			SetPageDoubleMap(compound_head(page));
+			SetPageDoubleMap(head);
 			if (PageMlocked(page))
-				clear_page_mlock(compound_head(page));
+				clear_page_mlock(head);
 		}
 		if (!atomic_inc_and_test(&page->_mapcount))
 			goto out;
diff --git a/mm/secretmem.c b/mm/secretmem.c
index 030f02ddc7c1..1fea68b8d5a6 100644
--- a/mm/secretmem.c
+++ b/mm/secretmem.c
@@ -18,6 +18,7 @@
 #include <linux/secretmem.h>
 #include <linux/set_memory.h>
 #include <linux/sched/signal.h>
+#include <linux/refcount.h>
 
 #include <uapi/linux/magic.h>
 
@@ -40,11 +41,11 @@ module_param_named(enable, secretmem_enable, bool, 0400);
 MODULE_PARM_DESC(secretmem_enable,
 		 "Enable secretmem and memfd_secret(2) system call");
 
-static atomic_t secretmem_users;
+static refcount_t secretmem_users;
 
 bool secretmem_active(void)
 {
-	return !!atomic_read(&secretmem_users);
+	return !!refcount_read(&secretmem_users);
 }
 
 static vm_fault_t secretmem_fault(struct vm_fault *vmf)
@@ -103,7 +104,7 @@ static const struct vm_operations_struct secretmem_vm_ops = {
 
 static int secretmem_release(struct inode *inode, struct file *file)
 {
-	atomic_dec(&secretmem_users);
+	refcount_dec(&secretmem_users);
 	return 0;
 }
 
@@ -217,7 +218,7 @@ SYSCALL_DEFINE1(memfd_secret, unsigned int, flags)
 	file->f_flags |= O_LARGEFILE;
 
 	fd_install(fd, file);
-	atomic_inc(&secretmem_users);
+	refcount_inc(&secretmem_users);
 	return fd;
 
 err_put_fd:
diff --git a/mm/slab_common.c b/mm/slab_common.c
index 1c673c323baf..ec2bb0beed75 100644
--- a/mm/slab_common.c
+++ b/mm/slab_common.c
@@ -502,6 +502,7 @@ void kmem_cache_destroy(struct kmem_cache *s)
 	if (unlikely(!s))
 		return;
 
+	cpus_read_lock();
 	mutex_lock(&slab_mutex);
 
 	s->refcount--;
@@ -516,6 +517,7 @@ void kmem_cache_destroy(struct kmem_cache *s)
 	}
 out_unlock:
 	mutex_unlock(&slab_mutex);
+	cpus_read_unlock();
 }
 EXPORT_SYMBOL(kmem_cache_destroy);
 
diff --git a/mm/slub.c b/mm/slub.c
index f77d8cd79ef7..3d2025f7163b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -46,13 +46,21 @@
 /*
  * Lock order:
  *   1. slab_mutex (Global Mutex)
- *   2. node->list_lock
- *   3. slab_lock(page) (Only on some arches and for debugging)
+ *   2. node->list_lock (Spinlock)
+ *   3. kmem_cache->cpu_slab->lock (Local lock)
+ *   4. slab_lock(page) (Only on some arches or for debugging)
+ *   5. object_map_lock (Only for debugging)
  *
  *   slab_mutex
  *
  *   The role of the slab_mutex is to protect the list of all the slabs
  *   and to synchronize major metadata changes to slab cache structures.
+ *   Also synchronizes memory hotplug callbacks.
+ *
+ *   slab_lock
+ *
+ *   The slab_lock is a wrapper around the page lock, thus it is a bit
+ *   spinlock.
  *
  *   The slab_lock is only used for debugging and on arches that do not
  *   have the ability to do a cmpxchg_double. It only protects:
@@ -61,6 +69,8 @@
  *	C. page->objects	-> Number of objects in page
  *	D. page->frozen		-> frozen state
  *
+ *   Frozen slabs
+ *
  *   If a slab is frozen then it is exempt from list management. It is not
  *   on any list except per cpu partial list. The processor that froze the
  *   slab is the one who can perform list operations on the page. Other
@@ -68,6 +78,8 @@
  *   froze the slab is the only one that can retrieve the objects from the
  *   page's freelist.
  *
+ *   list_lock
+ *
  *   The list_lock protects the partial and full list on each node and
  *   the partial slab counter. If taken then no new slabs may be added or
  *   removed from the lists nor make the number of partial slabs be modified.
@@ -79,10 +91,36 @@
  *   slabs, operations can continue without any centralized lock. F.e.
  *   allocating a long series of objects that fill up slabs does not require
  *   the list lock.
- *   Interrupts are disabled during allocation and deallocation in order to
- *   make the slab allocator safe to use in the context of an irq. In addition
- *   interrupts are disabled to ensure that the processor does not change
- *   while handling per_cpu slabs, due to kernel preemption.
+ *
+ *   cpu_slab->lock local lock
+ *
+ *   This locks protect slowpath manipulation of all kmem_cache_cpu fields
+ *   except the stat counters. This is a percpu structure manipulated only by
+ *   the local cpu, so the lock protects against being preempted or interrupted
+ *   by an irq. Fast path operations rely on lockless operations instead.
+ *   On PREEMPT_RT, the local lock does not actually disable irqs (and thus
+ *   prevent the lockless operations), so fastpath operations also need to take
+ *   the lock and are no longer lockless.
+ *
+ *   lockless fastpaths
+ *
+ *   The fast path allocation (slab_alloc_node()) and freeing (do_slab_free())
+ *   are fully lockless when satisfied from the percpu slab (and when
+ *   cmpxchg_double is possible to use, otherwise slab_lock is taken).
+ *   They also don't disable preemption or migration or irqs. They rely on
+ *   the transaction id (tid) field to detect being preempted or moved to
+ *   another cpu.
+ *
+ *   irq, preemption, migration considerations
+ *
+ *   Interrupts are disabled as part of list_lock or local_lock operations, or
+ *   around the slab_lock operation, in order to make the slab allocator safe
+ *   to use in the context of an irq.
+ *
+ *   In addition, preemption (or migration on PREEMPT_RT) is disabled in the
+ *   allocation slowpath, bulk allocation, and put_cpu_partial(), so that the
+ *   local cpu doesn't change in the process and e.g. the kmem_cache_cpu pointer
+ *   doesn't have to be revalidated in each section protected by the local lock.
  *
  * SLUB assigns one slab for allocation to each processor.
  * Allocations only occur from these slabs called cpu slabs.
@@ -118,6 +156,26 @@
  * 			the fast path and disables lockless freelists.
  */
 
+/*
+ * We could simply use migrate_disable()/enable() but as long as it's a
+ * function call even on !PREEMPT_RT, use inline preempt_disable() there.
+ */
+#ifndef CONFIG_PREEMPT_RT
+#define slub_get_cpu_ptr(var)	get_cpu_ptr(var)
+#define slub_put_cpu_ptr(var)	put_cpu_ptr(var)
+#else
+#define slub_get_cpu_ptr(var)		\
+({					\
+	migrate_disable();		\
+	this_cpu_ptr(var);		\
+})
+#define slub_put_cpu_ptr(var)		\
+do {					\
+	(void)(var);			\
+	migrate_enable();		\
+} while (0)
+#endif
+
 #ifdef CONFIG_SLUB_DEBUG
 #ifdef CONFIG_SLUB_DEBUG_ON
 DEFINE_STATIC_KEY_TRUE(slub_debug_enabled);
@@ -359,25 +417,44 @@ static inline unsigned int oo_objects(struct kmem_cache_order_objects x)
 /*
  * Per slab locking using the pagelock
  */
-static __always_inline void slab_lock(struct page *page)
+static __always_inline void __slab_lock(struct page *page)
 {
 	VM_BUG_ON_PAGE(PageTail(page), page);
 	bit_spin_lock(PG_locked, &page->flags);
 }
 
-static __always_inline void slab_unlock(struct page *page)
+static __always_inline void __slab_unlock(struct page *page)
 {
 	VM_BUG_ON_PAGE(PageTail(page), page);
 	__bit_spin_unlock(PG_locked, &page->flags);
 }
 
-/* Interrupts must be disabled (for the fallback code to work right) */
+static __always_inline void slab_lock(struct page *page, unsigned long *flags)
+{
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_irq_save(*flags);
+	__slab_lock(page);
+}
+
+static __always_inline void slab_unlock(struct page *page, unsigned long *flags)
+{
+	__slab_unlock(page);
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		local_irq_restore(*flags);
+}
+
+/*
+ * Interrupts must be disabled (for the fallback code to work right), typically
+ * by an _irqsave() lock variant. Except on PREEMPT_RT where locks are different
+ * so we disable interrupts as part of slab_[un]lock().
+ */
 static inline bool __cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 		void *freelist_old, unsigned long counters_old,
 		void *freelist_new, unsigned long counters_new,
 		const char *n)
 {
-	VM_BUG_ON(!irqs_disabled());
+	if (!IS_ENABLED(CONFIG_PREEMPT_RT))
+		lockdep_assert_irqs_disabled();
 #if defined(CONFIG_HAVE_CMPXCHG_DOUBLE) && \
     defined(CONFIG_HAVE_ALIGNED_STRUCT_PAGE)
 	if (s->flags & __CMPXCHG_DOUBLE) {
@@ -388,15 +465,18 @@ static inline bool __cmpxchg_double_slab(struct kmem_cache *s, struct page *page
 	} else
 #endif
 	{
-		slab_lock(page);
+		/* init to 0 to prevent spurious warnings */
+		unsigned long flags = 0;
+
+		slab_lock(page, &flags);
 		if (page->freelist == freelist_old &&
 					page->counters == counters_old) {
 			page->freelist = freelist_new;
 			page->counters = counters_new;
-			slab_unlock(page);
+			slab_unlock(page, &flags);
 			return true;
 		}
-		slab_unlock(page);
+		slab_unlock(page, &flags);
 	}
 
 	cpu_relax();
@@ -427,16 +507,16 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 		unsigned long flags;
 
 		local_irq_save(flags);
-		slab_lock(page);
+		__slab_lock(page);
 		if (page->freelist == freelist_old &&
 					page->counters == counters_old) {
 			page->freelist = freelist_new;
 			page->counters = counters_new;
-			slab_unlock(page);
+			__slab_unlock(page);
 			local_irq_restore(flags);
 			return true;
 		}
-		slab_unlock(page);
+		__slab_unlock(page);
 		local_irq_restore(flags);
 	}
 
@@ -452,7 +532,19 @@ static inline bool cmpxchg_double_slab(struct kmem_cache *s, struct page *page,
 
 #ifdef CONFIG_SLUB_DEBUG
 static unsigned long object_map[BITS_TO_LONGS(MAX_OBJS_PER_PAGE)];
-static DEFINE_SPINLOCK(object_map_lock);
+static DEFINE_RAW_SPINLOCK(object_map_lock);
+
+static void __fill_map(unsigned long *obj_map, struct kmem_cache *s,
+		       struct page *page)
+{
+	void *addr = page_address(page);
+	void *p;
+
+	bitmap_zero(obj_map, page->objects);
+
+	for (p = page->freelist; p; p = get_freepointer(s, p))
+		set_bit(__obj_to_index(s, addr, p), obj_map);
+}
 
 #if IS_ENABLED(CONFIG_KUNIT)
 static bool slab_add_kunit_errors(void)
@@ -483,17 +575,11 @@ static inline bool slab_add_kunit_errors(void) { return false; }
 static unsigned long *get_map(struct kmem_cache *s, struct page *page)
 	__acquires(&object_map_lock)
 {
-	void *p;
-	void *addr = page_address(page);
-
 	VM_BUG_ON(!irqs_disabled());
 
-	spin_lock(&object_map_lock);
+	raw_spin_lock(&object_map_lock);
 
-	bitmap_zero(object_map, page->objects);
-
-	for (p = page->freelist; p; p = get_freepointer(s, p))
-		set_bit(__obj_to_index(s, addr, p), object_map);
+	__fill_map(object_map, s, page);
 
 	return object_map;
 }
@@ -501,7 +587,7 @@ static unsigned long *get_map(struct kmem_cache *s, struct page *page)
 static void put_map(unsigned long *map) __releases(&object_map_lock)
 {
 	VM_BUG_ON(map != object_map);
-	spin_unlock(&object_map_lock);
+	raw_spin_unlock(&object_map_lock);
 }
 
 static inline unsigned int size_from_object(struct kmem_cache *s)
@@ -1003,8 +1089,6 @@ static int check_slab(struct kmem_cache *s, struct page *page)
 {
 	int maxobj;
 
-	VM_BUG_ON(!irqs_disabled());
-
 	if (!PageSlab(page)) {
 		slab_err(s, page, "Not a valid slab page");
 		return 0;
@@ -1265,11 +1349,11 @@ static noinline int free_debug_processing(
 	struct kmem_cache_node *n = get_node(s, page_to_nid(page));
 	void *object = head;
 	int cnt = 0;
-	unsigned long flags;
+	unsigned long flags, flags2;
 	int ret = 0;
 
 	spin_lock_irqsave(&n->list_lock, flags);
-	slab_lock(page);
+	slab_lock(page, &flags2);
 
 	if (s->flags & SLAB_CONSISTENCY_CHECKS) {
 		if (!check_slab(s, page))
@@ -1302,7 +1386,7 @@ out:
 		slab_err(s, page, "Bulk freelist count(%d) invalid(%d)\n",
 			 bulk_cnt, cnt);
 
-	slab_unlock(page);
+	slab_unlock(page, &flags2);
 	spin_unlock_irqrestore(&n->list_lock, flags);
 	if (!ret)
 		slab_fix(s, "Object at 0x%p not freed", object);
@@ -1585,20 +1669,8 @@ static __always_inline bool slab_free_hook(struct kmem_cache *s,
 {
 	kmemleak_free_recursive(x, s->flags);
 
-	/*
-	 * Trouble is that we may no longer disable interrupts in the fast path
-	 * So in order to make the debug calls that expect irqs to be
-	 * disabled we need to disable interrupts temporarily.
-	 */
-#ifdef CONFIG_LOCKDEP
-	{
-		unsigned long flags;
+	debug_check_no_locks_freed(x, s->object_size);
 
-		local_irq_save(flags);
-		debug_check_no_locks_freed(x, s->object_size);
-		local_irq_restore(flags);
-	}
-#endif
 	if (!(s->flags & SLAB_DEBUG_OBJECTS))
 		debug_check_no_obj_freed(x, s->object_size);
 
@@ -1815,9 +1887,6 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
 
 	flags &= gfp_allowed_mask;
 
-	if (gfpflags_allow_blocking(flags))
-		local_irq_enable();
-
 	flags |= s->allocflags;
 
 	/*
@@ -1876,8 +1945,6 @@ static struct page *allocate_slab(struct kmem_cache *s, gfp_t flags, int node)
 	page->frozen = 1;
 
 out:
-	if (gfpflags_allow_blocking(flags))
-		local_irq_disable();
 	if (!page)
 		return NULL;
 
@@ -1891,6 +1958,8 @@ static struct page *new_slab(struct kmem_cache *s, gfp_t flags, int node)
 	if (unlikely(flags & GFP_SLAB_BUG_MASK))
 		flags = kmalloc_fix_flags(flags);
 
+	WARN_ON_ONCE(s->ctor && (flags & __GFP_ZERO));
+
 	return allocate_slab(s,
 		flags & (GFP_RECLAIM_MASK | GFP_CONSTRAINT_MASK), node);
 }
@@ -2014,18 +2083,24 @@ static inline void *acquire_slab(struct kmem_cache *s,
 	return freelist;
 }
 
+#ifdef CONFIG_SLUB_CPU_PARTIAL
 static void put_cpu_partial(struct kmem_cache *s, struct page *page, int drain);
+#else
+static inline void put_cpu_partial(struct kmem_cache *s, struct page *page,
+				   int drain) { }
+#endif
 static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags);
 
 /*
  * Try to allocate a partial slab from a specific node.
  */
 static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
-				struct kmem_cache_cpu *c, gfp_t flags)
+			      struct page **ret_page, gfp_t gfpflags)
 {
 	struct page *page, *page2;
 	void *object = NULL;
 	unsigned int available = 0;
+	unsigned long flags;
 	int objects;
 
 	/*
@@ -2037,11 +2112,11 @@ static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
 	if (!n || !n->nr_partial)
 		return NULL;
 
-	spin_lock(&n->list_lock);
+	spin_lock_irqsave(&n->list_lock, flags);
 	list_for_each_entry_safe(page, page2, &n->partial, slab_list) {
 		void *t;
 
-		if (!pfmemalloc_match(page, flags))
+		if (!pfmemalloc_match(page, gfpflags))
 			continue;
 
 		t = acquire_slab(s, n, page, object == NULL, &objects);
@@ -2050,7 +2125,7 @@ static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
 
 		available += objects;
 		if (!object) {
-			c->page = page;
+			*ret_page = page;
 			stat(s, ALLOC_FROM_PARTIAL);
 			object = t;
 		} else {
@@ -2062,7 +2137,7 @@ static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
 			break;
 
 	}
-	spin_unlock(&n->list_lock);
+	spin_unlock_irqrestore(&n->list_lock, flags);
 	return object;
 }
 
@@ -2070,7 +2145,7 @@ static void *get_partial_node(struct kmem_cache *s, struct kmem_cache_node *n,
  * Get a page from somewhere. Search in increasing NUMA distances.
  */
 static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
-		struct kmem_cache_cpu *c)
+			     struct page **ret_page)
 {
 #ifdef CONFIG_NUMA
 	struct zonelist *zonelist;
@@ -2112,7 +2187,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
 
 			if (n && cpuset_zone_allowed(zone, flags) &&
 					n->nr_partial > s->min_partial) {
-				object = get_partial_node(s, n, c, flags);
+				object = get_partial_node(s, n, ret_page, flags);
 				if (object) {
 					/*
 					 * Don't check read_mems_allowed_retry()
@@ -2134,7 +2209,7 @@ static void *get_any_partial(struct kmem_cache *s, gfp_t flags,
  * Get a partial page, lock it and return it.
  */
 static void *get_partial(struct kmem_cache *s, gfp_t flags, int node,
-		struct kmem_cache_cpu *c)
+			 struct page **ret_page)
 {
 	void *object;
 	int searchnode = node;
@@ -2142,11 +2217,11 @@ static void *get_partial(struct kmem_cache *s, gfp_t flags, int node,
 	if (node == NUMA_NO_NODE)
 		searchnode = numa_mem_id();
 
-	object = get_partial_node(s, get_node(s, searchnode), c, flags);
+	object = get_partial_node(s, get_node(s, searchnode), ret_page, flags);
 	if (object || node != NUMA_NO_NODE)
 		return object;
 
-	return get_any_partial(s, flags, c);
+	return get_any_partial(s, flags, ret_page);
 }
 
 #ifdef CONFIG_PREEMPTION
@@ -2213,16 +2288,23 @@ static inline void note_cmpxchg_failure(const char *n,
 static void init_kmem_cache_cpus(struct kmem_cache *s)
 {
 	int cpu;
+	struct kmem_cache_cpu *c;
 
-	for_each_possible_cpu(cpu)
-		per_cpu_ptr(s->cpu_slab, cpu)->tid = init_tid(cpu);
+	for_each_possible_cpu(cpu) {
+		c = per_cpu_ptr(s->cpu_slab, cpu);
+		local_lock_init(&c->lock);
+		c->tid = init_tid(cpu);
+	}
 }
 
 /*
- * Remove the cpu slab
+ * Finishes removing the cpu slab. Merges cpu's freelist with page's freelist,
+ * unfreezes the slabs and puts it on the proper list.
+ * Assumes the slab has been already safely taken away from kmem_cache_cpu
+ * by the caller.
  */
 static void deactivate_slab(struct kmem_cache *s, struct page *page,
-				void *freelist, struct kmem_cache_cpu *c)
+			    void *freelist)
 {
 	enum slab_modes { M_NONE, M_PARTIAL, M_FULL, M_FREE };
 	struct kmem_cache_node *n = get_node(s, page_to_nid(page));
@@ -2230,6 +2312,7 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page,
 	enum slab_modes l = M_NONE, m = M_NONE;
 	void *nextfree, *freelist_iter, *freelist_tail;
 	int tail = DEACTIVATE_TO_HEAD;
+	unsigned long flags = 0;
 	struct page new;
 	struct page old;
 
@@ -2305,7 +2388,7 @@ redo:
 			 * that acquire_slab() will see a slab page that
 			 * is frozen
 			 */
-			spin_lock(&n->list_lock);
+			spin_lock_irqsave(&n->list_lock, flags);
 		}
 	} else {
 		m = M_FULL;
@@ -2316,7 +2399,7 @@ redo:
 			 * slabs from diagnostic functions will not see
 			 * any frozen slabs.
 			 */
-			spin_lock(&n->list_lock);
+			spin_lock_irqsave(&n->list_lock, flags);
 		}
 	}
 
@@ -2333,14 +2416,14 @@ redo:
 	}
 
 	l = m;
-	if (!__cmpxchg_double_slab(s, page,
+	if (!cmpxchg_double_slab(s, page,
 				old.freelist, old.counters,
 				new.freelist, new.counters,
 				"unfreezing slab"))
 		goto redo;
 
 	if (lock)
-		spin_unlock(&n->list_lock);
+		spin_unlock_irqrestore(&n->list_lock, flags);
 
 	if (m == M_PARTIAL)
 		stat(s, tail);
@@ -2351,38 +2434,29 @@ redo:
 		discard_slab(s, page);
 		stat(s, FREE_SLAB);
 	}
-
-	c->page = NULL;
-	c->freelist = NULL;
 }
 
-/*
- * Unfreeze all the cpu partial slabs.
- *
- * This function must be called with interrupts disabled
- * for the cpu using c (or some other guarantee must be there
- * to guarantee no concurrent accesses).
- */
-static void unfreeze_partials(struct kmem_cache *s,
-		struct kmem_cache_cpu *c)
-{
 #ifdef CONFIG_SLUB_CPU_PARTIAL
+static void __unfreeze_partials(struct kmem_cache *s, struct page *partial_page)
+{
 	struct kmem_cache_node *n = NULL, *n2 = NULL;
 	struct page *page, *discard_page = NULL;
+	unsigned long flags = 0;
 
-	while ((page = slub_percpu_partial(c))) {
+	while (partial_page) {
 		struct page new;
 		struct page old;
 
-		slub_set_percpu_partial(c, page);
+		page = partial_page;
+		partial_page = page->next;
 
 		n2 = get_node(s, page_to_nid(page));
 		if (n != n2) {
 			if (n)
-				spin_unlock(&n->list_lock);
+				spin_unlock_irqrestore(&n->list_lock, flags);
 
 			n = n2;
-			spin_lock(&n->list_lock);
+			spin_lock_irqsave(&n->list_lock, flags);
 		}
 
 		do {
@@ -2411,7 +2485,7 @@ static void unfreeze_partials(struct kmem_cache *s,
 	}
 
 	if (n)
-		spin_unlock(&n->list_lock);
+		spin_unlock_irqrestore(&n->list_lock, flags);
 
 	while (discard_page) {
 		page = discard_page;
@@ -2421,7 +2495,35 @@ static void unfreeze_partials(struct kmem_cache *s,
 		discard_slab(s, page);
 		stat(s, FREE_SLAB);
 	}
-#endif	/* CONFIG_SLUB_CPU_PARTIAL */
+}
+
+/*
+ * Unfreeze all the cpu partial slabs.
+ */
+static void unfreeze_partials(struct kmem_cache *s)
+{
+	struct page *partial_page;
+	unsigned long flags;
+
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+	partial_page = this_cpu_read(s->cpu_slab->partial);
+	this_cpu_write(s->cpu_slab->partial, NULL);
+	local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+
+	if (partial_page)
+		__unfreeze_partials(s, partial_page);
+}
+
+static void unfreeze_partials_cpu(struct kmem_cache *s,
+				  struct kmem_cache_cpu *c)
+{
+	struct page *partial_page;
+
+	partial_page = slub_percpu_partial(c);
+	c->partial = NULL;
+
+	if (partial_page)
+		__unfreeze_partials(s, partial_page);
 }
 
 /*
@@ -2433,97 +2535,170 @@ static void unfreeze_partials(struct kmem_cache *s,
  */
 static void put_cpu_partial(struct kmem_cache *s, struct page *page, int drain)
 {
-#ifdef CONFIG_SLUB_CPU_PARTIAL
 	struct page *oldpage;
-	int pages;
-	int pobjects;
+	struct page *page_to_unfreeze = NULL;
+	unsigned long flags;
+	int pages = 0;
+	int pobjects = 0;
 
-	preempt_disable();
-	do {
-		pages = 0;
-		pobjects = 0;
-		oldpage = this_cpu_read(s->cpu_slab->partial);
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+
+	oldpage = this_cpu_read(s->cpu_slab->partial);
 
-		if (oldpage) {
+	if (oldpage) {
+		if (drain && oldpage->pobjects > slub_cpu_partial(s)) {
+			/*
+			 * Partial array is full. Move the existing set to the
+			 * per node partial list. Postpone the actual unfreezing
+			 * outside of the critical section.
+			 */
+			page_to_unfreeze = oldpage;
+			oldpage = NULL;
+		} else {
 			pobjects = oldpage->pobjects;
 			pages = oldpage->pages;
-			if (drain && pobjects > slub_cpu_partial(s)) {
-				unsigned long flags;
-				/*
-				 * partial array is full. Move the existing
-				 * set to the per node partial list.
-				 */
-				local_irq_save(flags);
-				unfreeze_partials(s, this_cpu_ptr(s->cpu_slab));
-				local_irq_restore(flags);
-				oldpage = NULL;
-				pobjects = 0;
-				pages = 0;
-				stat(s, CPU_PARTIAL_DRAIN);
-			}
 		}
+	}
 
-		pages++;
-		pobjects += page->objects - page->inuse;
+	pages++;
+	pobjects += page->objects - page->inuse;
 
-		page->pages = pages;
-		page->pobjects = pobjects;
-		page->next = oldpage;
+	page->pages = pages;
+	page->pobjects = pobjects;
+	page->next = oldpage;
 
-	} while (this_cpu_cmpxchg(s->cpu_slab->partial, oldpage, page)
-								!= oldpage);
-	if (unlikely(!slub_cpu_partial(s))) {
-		unsigned long flags;
+	this_cpu_write(s->cpu_slab->partial, page);
 
-		local_irq_save(flags);
-		unfreeze_partials(s, this_cpu_ptr(s->cpu_slab));
-		local_irq_restore(flags);
+	local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+
+	if (page_to_unfreeze) {
+		__unfreeze_partials(s, page_to_unfreeze);
+		stat(s, CPU_PARTIAL_DRAIN);
 	}
-	preempt_enable();
-#endif	/* CONFIG_SLUB_CPU_PARTIAL */
 }
 
+#else	/* CONFIG_SLUB_CPU_PARTIAL */
+
+static inline void unfreeze_partials(struct kmem_cache *s) { }
+static inline void unfreeze_partials_cpu(struct kmem_cache *s,
+				  struct kmem_cache_cpu *c) { }
+
+#endif	/* CONFIG_SLUB_CPU_PARTIAL */
+
 static inline void flush_slab(struct kmem_cache *s, struct kmem_cache_cpu *c)
 {
-	stat(s, CPUSLAB_FLUSH);
-	deactivate_slab(s, c->page, c->freelist, c);
+	unsigned long flags;
+	struct page *page;
+	void *freelist;
+
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+
+	page = c->page;
+	freelist = c->freelist;
+
+	c->page = NULL;
+	c->freelist = NULL;
+	c->tid = next_tid(c->tid);
+
+	local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+
+	if (page) {
+		deactivate_slab(s, page, freelist);
+		stat(s, CPUSLAB_FLUSH);
+	}
+}
+
+static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu)
+{
+	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+	void *freelist = c->freelist;
+	struct page *page = c->page;
 
+	c->page = NULL;
+	c->freelist = NULL;
 	c->tid = next_tid(c->tid);
+
+	if (page) {
+		deactivate_slab(s, page, freelist);
+		stat(s, CPUSLAB_FLUSH);
+	}
+
+	unfreeze_partials_cpu(s, c);
 }
 
+struct slub_flush_work {
+	struct work_struct work;
+	struct kmem_cache *s;
+	bool skip;
+};
+
 /*
  * Flush cpu slab.
  *
- * Called from IPI handler with interrupts disabled.
+ * Called from CPU work handler with migration disabled.
  */
-static inline void __flush_cpu_slab(struct kmem_cache *s, int cpu)
+static void flush_cpu_slab(struct work_struct *w)
 {
-	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+	struct kmem_cache *s;
+	struct kmem_cache_cpu *c;
+	struct slub_flush_work *sfw;
+
+	sfw = container_of(w, struct slub_flush_work, work);
+
+	s = sfw->s;
+	c = this_cpu_ptr(s->cpu_slab);
 
 	if (c->page)
 		flush_slab(s, c);
 
-	unfreeze_partials(s, c);
+	unfreeze_partials(s);
 }
 
-static void flush_cpu_slab(void *d)
+static bool has_cpu_slab(int cpu, struct kmem_cache *s)
 {
-	struct kmem_cache *s = d;
+	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
 
-	__flush_cpu_slab(s, smp_processor_id());
+	return c->page || slub_percpu_partial(c);
 }
 
-static bool has_cpu_slab(int cpu, void *info)
+static DEFINE_MUTEX(flush_lock);
+static DEFINE_PER_CPU(struct slub_flush_work, slub_flush);
+
+static void flush_all_cpus_locked(struct kmem_cache *s)
 {
-	struct kmem_cache *s = info;
-	struct kmem_cache_cpu *c = per_cpu_ptr(s->cpu_slab, cpu);
+	struct slub_flush_work *sfw;
+	unsigned int cpu;
 
-	return c->page || slub_percpu_partial(c);
+	lockdep_assert_cpus_held();
+	mutex_lock(&flush_lock);
+
+	for_each_online_cpu(cpu) {
+		sfw = &per_cpu(slub_flush, cpu);
+		if (!has_cpu_slab(cpu, s)) {
+			sfw->skip = true;
+			continue;
+		}
+		INIT_WORK(&sfw->work, flush_cpu_slab);
+		sfw->skip = false;
+		sfw->s = s;
+		schedule_work_on(cpu, &sfw->work);
+	}
+
+	for_each_online_cpu(cpu) {
+		sfw = &per_cpu(slub_flush, cpu);
+		if (sfw->skip)
+			continue;
+		flush_work(&sfw->work);
+	}
+
+	mutex_unlock(&flush_lock);
 }
 
 static void flush_all(struct kmem_cache *s)
 {
-	on_each_cpu_cond(has_cpu_slab, flush_cpu_slab, s, 1);
+	cpus_read_lock();
+	flush_all_cpus_locked(s);
+	cpus_read_unlock();
 }
 
 /*
@@ -2533,14 +2708,10 @@ static void flush_all(struct kmem_cache *s)
 static int slub_cpu_dead(unsigned int cpu)
 {
 	struct kmem_cache *s;
-	unsigned long flags;
 
 	mutex_lock(&slab_mutex);
-	list_for_each_entry(s, &slab_caches, list) {
-		local_irq_save(flags);
+	list_for_each_entry(s, &slab_caches, list)
 		__flush_cpu_slab(s, cpu);
-		local_irq_restore(flags);
-	}
 	mutex_unlock(&slab_mutex);
 	return 0;
 }
@@ -2623,44 +2794,22 @@ slab_out_of_memory(struct kmem_cache *s, gfp_t gfpflags, int nid)
 #endif
 }
 
-static inline void *new_slab_objects(struct kmem_cache *s, gfp_t flags,
-			int node, struct kmem_cache_cpu **pc)
+static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags)
 {
-	void *freelist;
-	struct kmem_cache_cpu *c = *pc;
-	struct page *page;
-
-	WARN_ON_ONCE(s->ctor && (flags & __GFP_ZERO));
-
-	freelist = get_partial(s, flags, node, c);
-
-	if (freelist)
-		return freelist;
-
-	page = new_slab(s, flags, node);
-	if (page) {
-		c = raw_cpu_ptr(s->cpu_slab);
-		if (c->page)
-			flush_slab(s, c);
-
-		/*
-		 * No other reference to the page yet so we can
-		 * muck around with it freely without cmpxchg
-		 */
-		freelist = page->freelist;
-		page->freelist = NULL;
-
-		stat(s, ALLOC_SLAB);
-		c->page = page;
-		*pc = c;
-	}
+	if (unlikely(PageSlabPfmemalloc(page)))
+		return gfp_pfmemalloc_allowed(gfpflags);
 
-	return freelist;
+	return true;
 }
 
-static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags)
+/*
+ * A variant of pfmemalloc_match() that tests page flags without asserting
+ * PageSlab. Intended for opportunistic checks before taking a lock and
+ * rechecking that nobody else freed the page under us.
+ */
+static inline bool pfmemalloc_match_unsafe(struct page *page, gfp_t gfpflags)
 {
-	if (unlikely(PageSlabPfmemalloc(page)))
+	if (unlikely(__PageSlabPfmemalloc(page)))
 		return gfp_pfmemalloc_allowed(gfpflags);
 
 	return true;
@@ -2673,8 +2822,6 @@ static inline bool pfmemalloc_match(struct page *page, gfp_t gfpflags)
  * The page is still frozen if the return value is not NULL.
  *
  * If this function returns NULL then the page has been unfrozen.
- *
- * This function must be called with interrupt disabled.
  */
 static inline void *get_freelist(struct kmem_cache *s, struct page *page)
 {
@@ -2682,6 +2829,8 @@ static inline void *get_freelist(struct kmem_cache *s, struct page *page)
 	unsigned long counters;
 	void *freelist;
 
+	lockdep_assert_held(this_cpu_ptr(&s->cpu_slab->lock));
+
 	do {
 		freelist = page->freelist;
 		counters = page->counters;
@@ -2716,7 +2865,7 @@ static inline void *get_freelist(struct kmem_cache *s, struct page *page)
  * we need to allocate a new slab. This is the slowest path since it involves
  * a call to the page allocator and the setup of a new slab.
  *
- * Version of __slab_alloc to use when we know that interrupts are
+ * Version of __slab_alloc to use when we know that preemption is
  * already disabled (which is the case for bulk allocation).
  */
 static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
@@ -2724,10 +2873,13 @@ static void *___slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 {
 	void *freelist;
 	struct page *page;
+	unsigned long flags;
 
 	stat(s, ALLOC_SLOWPATH);
 
-	page = c->page;
+reread_page:
+
+	page = READ_ONCE(c->page);
 	if (!page) {
 		/*
 		 * if the node is not online or has no normal memory, just
@@ -2750,8 +2902,7 @@ redo:
 			goto redo;
 		} else {
 			stat(s, ALLOC_NODE_MISMATCH);
-			deactivate_slab(s, page, c->freelist, c);
-			goto new_slab;
+			goto deactivate_slab;
 		}
 	}
 
@@ -2760,12 +2911,15 @@ redo:
 	 * PFMEMALLOC but right now, we are losing the pfmemalloc
 	 * information when the page leaves the per-cpu allocator
 	 */
-	if (unlikely(!pfmemalloc_match(page, gfpflags))) {
-		deactivate_slab(s, page, c->freelist, c);
-		goto new_slab;
+	if (unlikely(!pfmemalloc_match_unsafe(page, gfpflags)))
+		goto deactivate_slab;
+
+	/* must check again c->page in case we got preempted and it changed */
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+	if (unlikely(page != c->page)) {
+		local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+		goto reread_page;
 	}
-
-	/* must check again c->freelist in case of cpu migration or IRQ */
 	freelist = c->freelist;
 	if (freelist)
 		goto load_freelist;
@@ -2774,6 +2928,7 @@ redo:
 
 	if (!freelist) {
 		c->page = NULL;
+		local_unlock_irqrestore(&s->cpu_slab->lock, flags);
 		stat(s, DEACTIVATE_BYPASS);
 		goto new_slab;
 	}
@@ -2781,6 +2936,9 @@ redo:
 	stat(s, ALLOC_REFILL);
 
 load_freelist:
+
+	lockdep_assert_held(this_cpu_ptr(&s->cpu_slab->lock));
+
 	/*
 	 * freelist is pointing to the list of objects to be used.
 	 * page is pointing to the page from which the objects are obtained.
@@ -2789,59 +2947,141 @@ load_freelist:
 	VM_BUG_ON(!c->page->frozen);
 	c->freelist = get_freepointer(s, freelist);
 	c->tid = next_tid(c->tid);
+	local_unlock_irqrestore(&s->cpu_slab->lock, flags);
 	return freelist;
 
+deactivate_slab:
+
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+	if (page != c->page) {
+		local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+		goto reread_page;
+	}
+	freelist = c->freelist;
+	c->page = NULL;
+	c->freelist = NULL;
+	local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+	deactivate_slab(s, page, freelist);
+
 new_slab:
 
 	if (slub_percpu_partial(c)) {
+		local_lock_irqsave(&s->cpu_slab->lock, flags);
+		if (unlikely(c->page)) {
+			local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+			goto reread_page;
+		}
+		if (unlikely(!slub_percpu_partial(c))) {
+			local_unlock_irqrestore(&s->cpu_slab->lock, flags);
+			/* we were preempted and partial list got empty */
+			goto new_objects;
+		}
+
 		page = c->page = slub_percpu_partial(c);
 		slub_set_percpu_partial(c, page);
+		local_unlock_irqrestore(&s->cpu_slab->lock, flags);
 		stat(s, CPU_PARTIAL_ALLOC);
 		goto redo;
 	}
 
-	freelist = new_slab_objects(s, gfpflags, node, &c);
+new_objects:
+
+	freelist = get_partial(s, gfpflags, node, &page);
+	if (freelist)
+		goto check_new_page;
+
+	slub_put_cpu_ptr(s->cpu_slab);
+	page = new_slab(s, gfpflags, node);
+	c = slub_get_cpu_ptr(s->cpu_slab);
 
-	if (unlikely(!freelist)) {
+	if (unlikely(!page)) {
 		slab_out_of_memory(s, gfpflags, node);
 		return NULL;
 	}
 
-	page = c->page;
-	if (likely(!kmem_cache_debug(s) && pfmemalloc_match(page, gfpflags)))
-		goto load_freelist;
+	/*
+	 * No other reference to the page yet so we can
+	 * muck around with it freely without cmpxchg
+	 */
+	freelist = page->freelist;
+	page->freelist = NULL;
 
-	/* Only entered in the debug case */
-	if (kmem_cache_debug(s) &&
-			!alloc_debug_processing(s, page, freelist, addr))
-		goto new_slab;	/* Slab failed checks. Next slab needed */
+	stat(s, ALLOC_SLAB);
+
+check_new_page:
+
+	if (kmem_cache_debug(s)) {
+		if (!alloc_debug_processing(s, page, freelist, addr)) {
+			/* Slab failed checks. Next slab needed */
+			goto new_slab;
+		} else {
+			/*
+			 * For debug case, we don't load freelist so that all
+			 * allocations go through alloc_debug_processing()
+			 */
+			goto return_single;
+		}
+	}
+
+	if (unlikely(!pfmemalloc_match(page, gfpflags)))
+		/*
+		 * For !pfmemalloc_match() case we don't load freelist so that
+		 * we don't make further mismatched allocations easier.
+		 */
+		goto return_single;
+
+retry_load_page:
+
+	local_lock_irqsave(&s->cpu_slab->lock, flags);
+	if (unlikely(c->page)) {
+		void *flush_freelist = c->freelist;
+		struct page *flush_page = c->page;
+
+		c->page = NULL;
+		c->freelist = NULL;
+		c->tid = next_tid(c->tid);
+
+		local_unlock_irqrestore(&s->cpu_slab->lock, flags);
 
-	deactivate_slab(s, page, get_freepointer(s, freelist), c);
+		deactivate_slab(s, flush_page, flush_freelist);
+
+		stat(s, CPUSLAB_FLUSH);
+
+		goto retry_load_page;
+	}
+	c->page = page;
+
+	goto load_freelist;
+
+return_single:
+
+	deactivate_slab(s, page, get_freepointer(s, freelist));
 	return freelist;
 }
 
 /*
- * Another one that disabled interrupt and compensates for possible
- * cpu changes by refetching the per cpu area pointer.
+ * A wrapper for ___slab_alloc() for contexts where preemption is not yet
+ * disabled. Compensates for possible cpu changes by refetching the per cpu area
+ * pointer.
  */
 static void *__slab_alloc(struct kmem_cache *s, gfp_t gfpflags, int node,
 			  unsigned long addr, struct kmem_cache_cpu *c)
 {
 	void *p;
-	unsigned long flags;
 
-	local_irq_save(flags);
-#ifdef CONFIG_PREEMPTION
+#ifdef CONFIG_PREEMPT_COUNT
 	/*
 	 * We may have been preempted and rescheduled on a different
-	 * cpu before disabling interrupts. Need to reload cpu area
+	 * cpu before disabling preemption. Need to reload cpu area
 	 * pointer.
 	 */
-	c = this_cpu_ptr(s->cpu_slab);
+	c = slub_get_cpu_ptr(s->cpu_slab);
 #endif
 
 	p = ___slab_alloc(s, gfpflags, node, addr, c);
-	local_irq_restore(flags);
+#ifdef CONFIG_PREEMPT_COUNT
+	slub_put_cpu_ptr(s->cpu_slab);
+#endif
 	return p;
 }
 
@@ -2892,15 +3132,14 @@ redo:
 	 * reading from one cpu area. That does not matter as long
 	 * as we end up on the original cpu again when doing the cmpxchg.
 	 *
-	 * We should guarantee that tid and kmem_cache are retrieved on
-	 * the same cpu. It could be different if CONFIG_PREEMPTION so we need
-	 * to check if it is matched or not.
+	 * We must guarantee that tid and kmem_cache_cpu are retrieved on the
+	 * same cpu. We read first the kmem_cache_cpu pointer and use it to read
+	 * the tid. If we are preempted and switched to another cpu between the
+	 * two reads, it's OK as the two are still associated with the same cpu
+	 * and cmpxchg later will validate the cpu.
 	 */
-	do {
-		tid = this_cpu_read(s->cpu_slab->tid);
-		c = raw_cpu_ptr(s->cpu_slab);
-	} while (IS_ENABLED(CONFIG_PREEMPTION) &&
-		 unlikely(tid != READ_ONCE(c->tid)));
+	c = raw_cpu_ptr(s->cpu_slab);
+	tid = READ_ONCE(c->tid);
 
 	/*
 	 * Irqless object alloc/free algorithm used here depends on sequence
@@ -2921,7 +3160,15 @@ redo:
 
 	object = c->freelist;
 	page = c->page;
-	if (unlikely(!object || !page || !node_match(page, node))) {
+	/*
+	 * We cannot use the lockless fastpath on PREEMPT_RT because if a
+	 * slowpath has taken the local_lock_irqsave(), it is not protected
+	 * against a fast path operation in an irq handler. So we need to take
+	 * the slow path which uses local_lock. It is still relatively fast if
+	 * there is a suitable cpu freelist.
+	 */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT) ||
+	    unlikely(!object || !page || !node_match(page, node))) {
 		object = __slab_alloc(s, gfpflags, node, addr, c);
 	} else {
 		void *next_object = get_freepointer_safe(s, object);
@@ -3174,16 +3421,14 @@ redo:
 	 * data is retrieved via this pointer. If we are on the same cpu
 	 * during the cmpxchg then the free will succeed.
 	 */
-	do {
-		tid = this_cpu_read(s->cpu_slab->tid);
-		c = raw_cpu_ptr(s->cpu_slab);
-	} while (IS_ENABLED(CONFIG_PREEMPTION) &&
-		 unlikely(tid != READ_ONCE(c->tid)));
+	c = raw_cpu_ptr(s->cpu_slab);
+	tid = READ_ONCE(c->tid);
 
 	/* Same with comment on barrier() in slab_alloc_node() */
 	barrier();
 
 	if (likely(page == c->page)) {
+#ifndef CONFIG_PREEMPT_RT
 		void **freelist = READ_ONCE(c->freelist);
 
 		set_freepointer(s, tail_obj, freelist);
@@ -3196,6 +3441,31 @@ redo:
 			note_cmpxchg_failure("slab_free", s, tid);
 			goto redo;
 		}
+#else /* CONFIG_PREEMPT_RT */
+		/*
+		 * We cannot use the lockless fastpath on PREEMPT_RT because if
+		 * a slowpath has taken the local_lock_irqsave(), it is not
+		 * protected against a fast path operation in an irq handler. So
+		 * we need to take the local_lock. We shouldn't simply defer to
+		 * __slab_free() as that wouldn't use the cpu freelist at all.
+		 */
+		void **freelist;
+
+		local_lock(&s->cpu_slab->lock);
+		c = this_cpu_ptr(s->cpu_slab);
+		if (unlikely(page != c->page)) {
+			local_unlock(&s->cpu_slab->lock);
+			goto redo;
+		}
+		tid = c->tid;
+		freelist = c->freelist;
+
+		set_freepointer(s, tail_obj, freelist);
+		c->freelist = head;
+		c->tid = next_tid(tid);
+
+		local_unlock(&s->cpu_slab->lock);
+#endif
 		stat(s, FREE_FASTPATH);
 	} else
 		__slab_free(s, page, head, tail_obj, cnt, addr);
@@ -3373,8 +3643,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 	 * IRQs, which protects against PREEMPT and interrupts
 	 * handlers invoking normal fastpath.
 	 */
-	local_irq_disable();
-	c = this_cpu_ptr(s->cpu_slab);
+	c = slub_get_cpu_ptr(s->cpu_slab);
+	local_lock_irq(&s->cpu_slab->lock);
 
 	for (i = 0; i < size; i++) {
 		void *object = kfence_alloc(s, s->object_size, flags);
@@ -3395,6 +3665,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 			 */
 			c->tid = next_tid(c->tid);
 
+			local_unlock_irq(&s->cpu_slab->lock);
+
 			/*
 			 * Invoking slow path likely have side-effect
 			 * of re-populating per CPU c->freelist
@@ -3407,6 +3679,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 			c = this_cpu_ptr(s->cpu_slab);
 			maybe_wipe_obj_freeptr(s, p[i]);
 
+			local_lock_irq(&s->cpu_slab->lock);
+
 			continue; /* goto for-loop */
 		}
 		c->freelist = get_freepointer(s, object);
@@ -3414,7 +3688,8 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 		maybe_wipe_obj_freeptr(s, p[i]);
 	}
 	c->tid = next_tid(c->tid);
-	local_irq_enable();
+	local_unlock_irq(&s->cpu_slab->lock);
+	slub_put_cpu_ptr(s->cpu_slab);
 
 	/*
 	 * memcg and kmem_cache debug support and memory initialization.
@@ -3424,7 +3699,7 @@ int kmem_cache_alloc_bulk(struct kmem_cache *s, gfp_t flags, size_t size,
 				slab_want_init_on_alloc(flags, s));
 	return i;
 error:
-	local_irq_enable();
+	slub_put_cpu_ptr(s->cpu_slab);
 	slab_post_alloc_hook(s, objcg, flags, i, p, false);
 	__kmem_cache_free_bulk(s, i, p);
 	return 0;
@@ -3938,11 +4213,12 @@ static void list_slab_objects(struct kmem_cache *s, struct page *page,
 {
 #ifdef CONFIG_SLUB_DEBUG
 	void *addr = page_address(page);
+	unsigned long flags;
 	unsigned long *map;
 	void *p;
 
 	slab_err(s, page, text, s->name);
-	slab_lock(page);
+	slab_lock(page, &flags);
 
 	map = get_map(s, page);
 	for_each_object(p, s, addr, page->objects) {
@@ -3953,7 +4229,7 @@ static void list_slab_objects(struct kmem_cache *s, struct page *page,
 		}
 	}
 	put_map(map);
-	slab_unlock(page);
+	slab_unlock(page, &flags);
 #endif
 }
 
@@ -4003,7 +4279,7 @@ int __kmem_cache_shutdown(struct kmem_cache *s)
 	int node;
 	struct kmem_cache_node *n;
 
-	flush_all(s);
+	flush_all_cpus_locked(s);
 	/* Attempt to free all objects */
 	for_each_kmem_cache_node(s, node, n) {
 		free_partial(s, n);
@@ -4279,7 +4555,7 @@ EXPORT_SYMBOL(kfree);
  * being allocated from last increasing the chance that the last objects
  * are freed in them.
  */
-int __kmem_cache_shrink(struct kmem_cache *s)
+static int __kmem_cache_do_shrink(struct kmem_cache *s)
 {
 	int node;
 	int i;
@@ -4291,7 +4567,6 @@ int __kmem_cache_shrink(struct kmem_cache *s)
 	unsigned long flags;
 	int ret = 0;
 
-	flush_all(s);
 	for_each_kmem_cache_node(s, node, n) {
 		INIT_LIST_HEAD(&discard);
 		for (i = 0; i < SHRINK_PROMOTE_MAX; i++)
@@ -4341,13 +4616,21 @@ int __kmem_cache_shrink(struct kmem_cache *s)
 	return ret;
 }
 
+int __kmem_cache_shrink(struct kmem_cache *s)
+{
+	flush_all(s);
+	return __kmem_cache_do_shrink(s);
+}
+
 static int slab_mem_going_offline_callback(void *arg)
 {
 	struct kmem_cache *s;
 
 	mutex_lock(&slab_mutex);
-	list_for_each_entry(s, &slab_caches, list)
-		__kmem_cache_shrink(s);
+	list_for_each_entry(s, &slab_caches, list) {
+		flush_all_cpus_locked(s);
+		__kmem_cache_do_shrink(s);
+	}
 	mutex_unlock(&slab_mutex);
 
 	return 0;
@@ -4673,33 +4956,33 @@ static int count_total(struct page *page)
 #endif
 
 #ifdef CONFIG_SLUB_DEBUG
-static void validate_slab(struct kmem_cache *s, struct page *page)
+static void validate_slab(struct kmem_cache *s, struct page *page,
+			  unsigned long *obj_map)
 {
 	void *p;
 	void *addr = page_address(page);
-	unsigned long *map;
+	unsigned long flags;
 
-	slab_lock(page);
+	slab_lock(page, &flags);
 
 	if (!check_slab(s, page) || !on_freelist(s, page, NULL))
 		goto unlock;
 
 	/* Now we know that a valid freelist exists */
-	map = get_map(s, page);
+	__fill_map(obj_map, s, page);
 	for_each_object(p, s, addr, page->objects) {
-		u8 val = test_bit(__obj_to_index(s, addr, p), map) ?
+		u8 val = test_bit(__obj_to_index(s, addr, p), obj_map) ?
 			 SLUB_RED_INACTIVE : SLUB_RED_ACTIVE;
 
 		if (!check_object(s, page, p, val))
 			break;
 	}
-	put_map(map);
 unlock:
-	slab_unlock(page);
+	slab_unlock(page, &flags);
 }
 
 static int validate_slab_node(struct kmem_cache *s,
-		struct kmem_cache_node *n)
+		struct kmem_cache_node *n, unsigned long *obj_map)
 {
 	unsigned long count = 0;
 	struct page *page;
@@ -4708,7 +4991,7 @@ static int validate_slab_node(struct kmem_cache *s,
 	spin_lock_irqsave(&n->list_lock, flags);
 
 	list_for_each_entry(page, &n->partial, slab_list) {
-		validate_slab(s, page);
+		validate_slab(s, page, obj_map);
 		count++;
 	}
 	if (count != n->nr_partial) {
@@ -4721,7 +5004,7 @@ static int validate_slab_node(struct kmem_cache *s,
 		goto out;
 
 	list_for_each_entry(page, &n->full, slab_list) {
-		validate_slab(s, page);
+		validate_slab(s, page, obj_map);
 		count++;
 	}
 	if (count != atomic_long_read(&n->nr_slabs)) {
@@ -4740,10 +5023,17 @@ long validate_slab_cache(struct kmem_cache *s)
 	int node;
 	unsigned long count = 0;
 	struct kmem_cache_node *n;
+	unsigned long *obj_map;
+
+	obj_map = bitmap_alloc(oo_objects(s->oo), GFP_KERNEL);
+	if (!obj_map)
+		return -ENOMEM;
 
 	flush_all(s);
 	for_each_kmem_cache_node(s, node, n)
-		count += validate_slab_node(s, n);
+		count += validate_slab_node(s, n, obj_map);
+
+	bitmap_free(obj_map);
 
 	return count;
 }
@@ -4879,17 +5169,17 @@ static int add_location(struct loc_track *t, struct kmem_cache *s,
 }
 
 static void process_slab(struct loc_track *t, struct kmem_cache *s,
-		struct page *page, enum track_item alloc)
+		struct page *page, enum track_item alloc,
+		unsigned long *obj_map)
 {
 	void *addr = page_address(page);
 	void *p;
-	unsigned long *map;
 
-	map = get_map(s, page);
+	__fill_map(obj_map, s, page);
+
 	for_each_object(p, s, addr, page->objects)
-		if (!test_bit(__obj_to_index(s, addr, p), map))
+		if (!test_bit(__obj_to_index(s, addr, p), obj_map))
 			add_location(t, s, get_track(s, p, alloc));
-	put_map(map);
 }
 #endif  /* CONFIG_DEBUG_FS   */
 #endif	/* CONFIG_SLUB_DEBUG */
@@ -5816,17 +6106,21 @@ static int slab_debug_trace_open(struct inode *inode, struct file *filep)
 	struct loc_track *t = __seq_open_private(filep, &slab_debugfs_sops,
 						sizeof(struct loc_track));
 	struct kmem_cache *s = file_inode(filep)->i_private;
+	unsigned long *obj_map;
+
+	obj_map = bitmap_alloc(oo_objects(s->oo), GFP_KERNEL);
+	if (!obj_map)
+		return -ENOMEM;
 
 	if (strcmp(filep->f_path.dentry->d_name.name, "alloc_traces") == 0)
 		alloc = TRACK_ALLOC;
 	else
 		alloc = TRACK_FREE;
 
-	if (!alloc_loc_track(t, PAGE_SIZE / sizeof(struct location), GFP_KERNEL))
+	if (!alloc_loc_track(t, PAGE_SIZE / sizeof(struct location), GFP_KERNEL)) {
+		bitmap_free(obj_map);
 		return -ENOMEM;
-
-	/* Push back cpu slabs */
-	flush_all(s);
+	}
 
 	for_each_kmem_cache_node(s, node, n) {
 		unsigned long flags;
@@ -5837,12 +6131,13 @@ static int slab_debug_trace_open(struct inode *inode, struct file *filep)
 
 		spin_lock_irqsave(&n->list_lock, flags);
 		list_for_each_entry(page, &n->partial, slab_list)
-			process_slab(t, s, page, alloc);
+			process_slab(t, s, page, alloc, obj_map);
 		list_for_each_entry(page, &n->full, slab_list)
-			process_slab(t, s, page, alloc);
+			process_slab(t, s, page, alloc, obj_map);
 		spin_unlock_irqrestore(&n->list_lock, flags);
 	}
 
+	bitmap_free(obj_map);
 	return 0;
 }
 
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index 3824dc16ce1c..d77830ff604c 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -44,6 +44,19 @@
 #include "internal.h"
 #include "pgalloc-track.h"
 
+#ifdef CONFIG_HAVE_ARCH_HUGE_VMAP
+static unsigned int __ro_after_init ioremap_max_page_shift = BITS_PER_LONG - 1;
+
+static int __init set_nohugeiomap(char *str)
+{
+	ioremap_max_page_shift = PAGE_SHIFT;
+	return 0;
+}
+early_param("nohugeiomap", set_nohugeiomap);
+#else /* CONFIG_HAVE_ARCH_HUGE_VMAP */
+static const unsigned int ioremap_max_page_shift = PAGE_SHIFT;
+#endif	/* CONFIG_HAVE_ARCH_HUGE_VMAP */
+
 #ifdef CONFIG_HAVE_ARCH_HUGE_VMALLOC
 static bool __ro_after_init vmap_allow_huge = true;
 
@@ -298,15 +311,14 @@ static int vmap_range_noflush(unsigned long addr, unsigned long end,
 	return err;
 }
 
-int vmap_range(unsigned long addr, unsigned long end,
-			phys_addr_t phys_addr, pgprot_t prot,
-			unsigned int max_page_shift)
+int ioremap_page_range(unsigned long addr, unsigned long end,
+		phys_addr_t phys_addr, pgprot_t prot)
 {
 	int err;
 
-	err = vmap_range_noflush(addr, end, phys_addr, prot, max_page_shift);
+	err = vmap_range_noflush(addr, end, phys_addr, pgprot_nx(prot),
+				 ioremap_max_page_shift);
 	flush_cache_vmap(addr, end);
-
 	return err;
 }
 
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 740d03e6dae2..74296c2d1fed 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -2715,7 +2715,7 @@ out:
 			cgroup_size = max(cgroup_size, protection);
 
 			scan = lruvec_size - lruvec_size * protection /
-				cgroup_size;
+				(cgroup_size + 1);
 
 			/*
 			 * Minimally target SWAP_CLUSTER_MAX pages to keep
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 0885a34197b7..8ce2620344b2 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -319,6 +319,16 @@ void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
 	long x;
 	long t;
 
+	/*
+	 * Accurate vmstat updates require a RMW. On !PREEMPT_RT kernels,
+	 * atomicity is provided by IRQs being disabled -- either explicitly
+	 * or via local_lock_irq. On PREEMPT_RT, local_lock_irq only disables
+	 * CPU migrations and preemption potentially corrupts a counter so
+	 * disable preemption.
+	 */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	x = delta + __this_cpu_read(*p);
 
 	t = __this_cpu_read(pcp->stat_threshold);
@@ -328,6 +338,9 @@ void __mod_zone_page_state(struct zone *zone, enum zone_stat_item item,
 		x = 0;
 	}
 	__this_cpu_write(*p, x);
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 EXPORT_SYMBOL(__mod_zone_page_state);
 
@@ -350,6 +363,10 @@ void __mod_node_page_state(struct pglist_data *pgdat, enum node_stat_item item,
 		delta >>= PAGE_SHIFT;
 	}
 
+	/* See __mod_node_page_state */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	x = delta + __this_cpu_read(*p);
 
 	t = __this_cpu_read(pcp->stat_threshold);
@@ -359,6 +376,9 @@ void __mod_node_page_state(struct pglist_data *pgdat, enum node_stat_item item,
 		x = 0;
 	}
 	__this_cpu_write(*p, x);
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 EXPORT_SYMBOL(__mod_node_page_state);
 
@@ -391,6 +411,10 @@ void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
 	s8 __percpu *p = pcp->vm_stat_diff + item;
 	s8 v, t;
 
+	/* See __mod_node_page_state */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	v = __this_cpu_inc_return(*p);
 	t = __this_cpu_read(pcp->stat_threshold);
 	if (unlikely(v > t)) {
@@ -399,6 +423,9 @@ void __inc_zone_state(struct zone *zone, enum zone_stat_item item)
 		zone_page_state_add(v + overstep, zone, item);
 		__this_cpu_write(*p, -overstep);
 	}
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 
 void __inc_node_state(struct pglist_data *pgdat, enum node_stat_item item)
@@ -409,6 +436,10 @@ void __inc_node_state(struct pglist_data *pgdat, enum node_stat_item item)
 
 	VM_WARN_ON_ONCE(vmstat_item_in_bytes(item));
 
+	/* See __mod_node_page_state */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	v = __this_cpu_inc_return(*p);
 	t = __this_cpu_read(pcp->stat_threshold);
 	if (unlikely(v > t)) {
@@ -417,6 +448,9 @@ void __inc_node_state(struct pglist_data *pgdat, enum node_stat_item item)
 		node_page_state_add(v + overstep, pgdat, item);
 		__this_cpu_write(*p, -overstep);
 	}
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 
 void __inc_zone_page_state(struct page *page, enum zone_stat_item item)
@@ -437,6 +471,10 @@ void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
 	s8 __percpu *p = pcp->vm_stat_diff + item;
 	s8 v, t;
 
+	/* See __mod_node_page_state */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	v = __this_cpu_dec_return(*p);
 	t = __this_cpu_read(pcp->stat_threshold);
 	if (unlikely(v < - t)) {
@@ -445,6 +483,9 @@ void __dec_zone_state(struct zone *zone, enum zone_stat_item item)
 		zone_page_state_add(v - overstep, zone, item);
 		__this_cpu_write(*p, overstep);
 	}
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 
 void __dec_node_state(struct pglist_data *pgdat, enum node_stat_item item)
@@ -455,6 +496,10 @@ void __dec_node_state(struct pglist_data *pgdat, enum node_stat_item item)
 
 	VM_WARN_ON_ONCE(vmstat_item_in_bytes(item));
 
+	/* See __mod_node_page_state */
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_disable();
+
 	v = __this_cpu_dec_return(*p);
 	t = __this_cpu_read(pcp->stat_threshold);
 	if (unlikely(v < - t)) {
@@ -463,6 +508,9 @@ void __dec_node_state(struct pglist_data *pgdat, enum node_stat_item item)
 		node_page_state_add(v - overstep, pgdat, item);
 		__this_cpu_write(*p, overstep);
 	}
+
+	if (IS_ENABLED(CONFIG_PREEMPT_RT))
+		preempt_enable();
 }
 
 void __dec_zone_page_state(struct page *page, enum zone_stat_item item)
diff --git a/mm/workingset.c b/mm/workingset.c
index 5ba3e42446fa..d4268d8e9a82 100644
--- a/mm/workingset.c
+++ b/mm/workingset.c
@@ -249,7 +249,7 @@ void workingset_age_nonresident(struct lruvec *lruvec, unsigned long nr_pages)
  * @target_memcg: the cgroup that is causing the reclaim
  * @page: the page being evicted
  *
- * Returns a shadow entry to be stored in @page->mapping->i_pages in place
+ * Return: a shadow entry to be stored in @page->mapping->i_pages in place
  * of the evicted @page so that a later refault can be detected.
  */
 void *workingset_eviction(struct page *page, struct mem_cgroup *target_memcg)
diff --git a/net/9p/client.c b/net/9p/client.c
index b7b958f61faf..213f12ed76cd 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -30,6 +30,8 @@
 #define CREATE_TRACE_POINTS
 #include <trace/events/9p.h>
 
+#define DEFAULT_MSIZE (128 * 1024)
+
 /*
   * Client Option Parsing (code inspired by NFS code)
   *  - a little lazy - parse all client options
@@ -65,7 +67,7 @@ EXPORT_SYMBOL(p9_is_proto_dotu);
 
 int p9_show_client_options(struct seq_file *m, struct p9_client *clnt)
 {
-	if (clnt->msize != 8192)
+	if (clnt->msize != DEFAULT_MSIZE)
 		seq_printf(m, ",msize=%u", clnt->msize);
 	seq_printf(m, ",trans=%s", clnt->trans_mod->name);
 
@@ -139,7 +141,7 @@ static int parse_opts(char *opts, struct p9_client *clnt)
 	int ret = 0;
 
 	clnt->proto_version = p9_proto_2000L;
-	clnt->msize = 8192;
+	clnt->msize = DEFAULT_MSIZE;
 
 	if (!opts)
 		return 0;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index f4dd0456beaf..007bbcc68010 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -34,7 +34,7 @@
 #include <linux/syscalls.h> /* killme */
 
 #define P9_PORT 564
-#define MAX_SOCK_BUF (64*1024)
+#define MAX_SOCK_BUF (1024*1024)
 #define MAXPOLLWADDR	2
 
 static struct p9_trans_module p9_tcp_trans;
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 2bbd7dce0f1d..490a4c900339 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -610,7 +610,7 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 	chan->vc_wq = kmalloc(sizeof(wait_queue_head_t), GFP_KERNEL);
 	if (!chan->vc_wq) {
 		err = -ENOMEM;
-		goto out_free_tag;
+		goto out_remove_file;
 	}
 	init_waitqueue_head(chan->vc_wq);
 	chan->ring_bufs_avail = 1;
@@ -628,6 +628,8 @@ static int p9_virtio_probe(struct virtio_device *vdev)
 
 	return 0;
 
+out_remove_file:
+	sysfs_remove_file(&vdev->dev.kobj, &dev_attr_mount_tag.attr);
 out_free_tag:
 	kfree(tag);
 out_free_vq:
diff --git a/net/9p/trans_xen.c b/net/9p/trans_xen.c
index f4fea28e05da..3ec1a51a6944 100644
--- a/net/9p/trans_xen.c
+++ b/net/9p/trans_xen.c
@@ -138,7 +138,7 @@ static bool p9_xen_write_todo(struct xen_9pfs_dataring *ring, RING_IDX size)
 
 static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req)
 {
-	struct xen_9pfs_front_priv *priv = NULL;
+	struct xen_9pfs_front_priv *priv;
 	RING_IDX cons, prod, masked_cons, masked_prod;
 	unsigned long flags;
 	u32 size = p9_req->tc.size;
@@ -151,7 +151,7 @@ static int p9_xen_request(struct p9_client *client, struct p9_req_t *p9_req)
 			break;
 	}
 	read_unlock(&xen_9pfs_lock);
-	if (!priv || priv->client != client)
+	if (list_entry_is_head(priv, &xen_9pfs_devs, list))
 		return -EINVAL;
 
 	num = p9_req->tc.tag % priv->num_rings;
diff --git a/net/bridge/br_multicast.c b/net/bridge/br_multicast.c
index 9231617a16e4..3523c8c7068f 100644
--- a/net/bridge/br_multicast.c
+++ b/net/bridge/br_multicast.c
@@ -4255,7 +4255,7 @@ int br_multicast_set_port_router(struct net_bridge_mcast_port *pmctx,
 	bool del = false;
 
 	brmctx = br_multicast_port_ctx_get_global(pmctx);
-	spin_lock(&brmctx->br->multicast_lock);
+	spin_lock_bh(&brmctx->br->multicast_lock);
 	if (pmctx->multicast_router == val) {
 		/* Refresh the temp router port timer */
 		if (pmctx->multicast_router == MDB_RTR_TYPE_TEMP) {
@@ -4305,7 +4305,7 @@ int br_multicast_set_port_router(struct net_bridge_mcast_port *pmctx,
 	}
 	err = 0;
 unlock:
-	spin_unlock(&brmctx->br->multicast_lock);
+	spin_unlock_bh(&brmctx->br->multicast_lock);
 
 	return err;
 }
diff --git a/net/core/pktgen.c b/net/core/pktgen.c
index 9e5a3249373c..a3d74e2704c4 100644
--- a/net/core/pktgen.c
+++ b/net/core/pktgen.c
@@ -3602,7 +3602,6 @@ out:
 
 static int pktgen_thread_worker(void *arg)
 {
-	DEFINE_WAIT(wait);
 	struct pktgen_thread *t = arg;
 	struct pktgen_dev *pkt_dev = NULL;
 	int cpu = t->cpu;
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index f9311762cc47..2170bea2c7de 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -3884,7 +3884,7 @@ struct sk_buff *skb_segment_list(struct sk_buff *skb,
 		skb_push(nskb, -skb_network_offset(nskb) + offset);
 
 		skb_release_head_state(nskb);
-		 __copy_skb_header(nskb, skb);
+		__copy_skb_header(nskb, skb);
 
 		skb_headers_offset_update(nskb, skb_headroom(nskb) - skb_headroom(skb));
 		skb_copy_from_linear_data_offset(skb, -tnl_hlen,
diff --git a/net/dsa/tag_rtl4_a.c b/net/dsa/tag_rtl4_a.c
index 40811bab4d09..f920487ae145 100644
--- a/net/dsa/tag_rtl4_a.c
+++ b/net/dsa/tag_rtl4_a.c
@@ -54,9 +54,10 @@ static struct sk_buff *rtl4a_tag_xmit(struct sk_buff *skb,
 	p = (__be16 *)tag;
 	*p = htons(RTL4_A_ETHERTYPE);
 
-	out = (RTL4_A_PROTOCOL_RTL8366RB << 12) | (2 << 8);
-	/* The lower bits is the port number */
-	out |= (u8)dp->index;
+	out = (RTL4_A_PROTOCOL_RTL8366RB << RTL4_A_PROTOCOL_SHIFT) | (2 << 8);
+	/* The lower bits indicate the port number */
+	out |= BIT(dp->index);
+
 	p = (__be16 *)(tag + 2);
 	*p = htons(out);
 
diff --git a/net/ipv4/cipso_ipv4.c b/net/ipv4/cipso_ipv4.c
index 7fbd0b532f52..099259fc826a 100644
--- a/net/ipv4/cipso_ipv4.c
+++ b/net/ipv4/cipso_ipv4.c
@@ -465,16 +465,14 @@ void cipso_v4_doi_free(struct cipso_v4_doi *doi_def)
 	if (!doi_def)
 		return;
 
-	if (doi_def->map.std) {
-		switch (doi_def->type) {
-		case CIPSO_V4_MAP_TRANS:
-			kfree(doi_def->map.std->lvl.cipso);
-			kfree(doi_def->map.std->lvl.local);
-			kfree(doi_def->map.std->cat.cipso);
-			kfree(doi_def->map.std->cat.local);
-			kfree(doi_def->map.std);
-			break;
-		}
+	switch (doi_def->type) {
+	case CIPSO_V4_MAP_TRANS:
+		kfree(doi_def->map.std->lvl.cipso);
+		kfree(doi_def->map.std->lvl.local);
+		kfree(doi_def->map.std->cat.cipso);
+		kfree(doi_def->map.std->cat.local);
+		kfree(doi_def->map.std);
+		break;
 	}
 	kfree(doi_def);
 }
diff --git a/net/ipv4/ip_gre.c b/net/ipv4/ip_gre.c
index 177d26d8fb9c..0fe6c936dc54 100644
--- a/net/ipv4/ip_gre.c
+++ b/net/ipv4/ip_gre.c
@@ -473,8 +473,6 @@ static void __gre_xmit(struct sk_buff *skb, struct net_device *dev,
 
 static int gre_handle_offloads(struct sk_buff *skb, bool csum)
 {
-	if (csum && skb_checksum_start(skb) < skb->data)
-		return -EINVAL;
 	return iptunnel_handle_offloads(skb, csum ? SKB_GSO_GRE_CSUM : SKB_GSO_GRE);
 }
 
@@ -632,15 +630,20 @@ static netdev_tx_t ipgre_xmit(struct sk_buff *skb,
 	}
 
 	if (dev->header_ops) {
+		const int pull_len = tunnel->hlen + sizeof(struct iphdr);
+
 		if (skb_cow_head(skb, 0))
 			goto free_skb;
 
 		tnl_params = (const struct iphdr *)skb->data;
 
+		if (pull_len > skb_transport_offset(skb))
+			goto free_skb;
+
 		/* Pull skb since ip_tunnel_xmit() needs skb->data pointing
 		 * to gre header.
 		 */
-		skb_pull(skb, tunnel->hlen + sizeof(struct iphdr));
+		skb_pull(skb, pull_len);
 		skb_reset_mac_header(skb);
 	} else {
 		if (skb_cow_head(skb, dev->needed_headroom))
diff --git a/net/ipv4/nexthop.c b/net/ipv4/nexthop.c
index 4075230b14c6..75ca4b6e484f 100644
--- a/net/ipv4/nexthop.c
+++ b/net/ipv4/nexthop.c
@@ -2490,6 +2490,7 @@ static int nh_create_ipv4(struct net *net, struct nexthop *nh,
 		.fc_gw4   = cfg->gw.ipv4,
 		.fc_gw_family = cfg->gw.ipv4 ? AF_INET : 0,
 		.fc_flags = cfg->nh_flags,
+		.fc_nlinfo = cfg->nlinfo,
 		.fc_encap = cfg->nh_encap,
 		.fc_encap_type = cfg->nh_encap_type,
 	};
@@ -2528,6 +2529,7 @@ static int nh_create_ipv6(struct net *net,  struct nexthop *nh,
 		.fc_ifindex = cfg->nh_ifindex,
 		.fc_gateway = cfg->gw.ipv6,
 		.fc_flags = cfg->nh_flags,
+		.fc_nlinfo = cfg->nlinfo,
 		.fc_encap = cfg->nh_encap,
 		.fc_encap_type = cfg->nh_encap_type,
 		.fc_is_fdb = cfg->nh_fdb,
diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c
index 17756f3ed33b..c6a90b7bbb70 100644
--- a/net/ipv6/addrconf.c
+++ b/net/ipv6/addrconf.c
@@ -3092,19 +3092,22 @@ static void add_addr(struct inet6_dev *idev, const struct in6_addr *addr,
 	}
 }
 
-#if IS_ENABLED(CONFIG_IPV6_SIT)
-static void sit_add_v4_addrs(struct inet6_dev *idev)
+#if IS_ENABLED(CONFIG_IPV6_SIT) || IS_ENABLED(CONFIG_NET_IPGRE) || IS_ENABLED(CONFIG_IPV6_GRE)
+static void add_v4_addrs(struct inet6_dev *idev)
 {
 	struct in6_addr addr;
 	struct net_device *dev;
 	struct net *net = dev_net(idev->dev);
-	int scope, plen;
+	int scope, plen, offset = 0;
 	u32 pflags = 0;
 
 	ASSERT_RTNL();
 
 	memset(&addr, 0, sizeof(struct in6_addr));
-	memcpy(&addr.s6_addr32[3], idev->dev->dev_addr, 4);
+	/* in case of IP6GRE the dev_addr is an IPv6 and therefore we use only the last 4 bytes */
+	if (idev->dev->addr_len == sizeof(struct in6_addr))
+		offset = sizeof(struct in6_addr) - 4;
+	memcpy(&addr.s6_addr32[3], idev->dev->dev_addr + offset, 4);
 
 	if (idev->dev->flags&IFF_POINTOPOINT) {
 		addr.s6_addr32[0] = htonl(0xfe800000);
@@ -3342,8 +3345,6 @@ static void addrconf_dev_config(struct net_device *dev)
 	    (dev->type != ARPHRD_IEEE1394) &&
 	    (dev->type != ARPHRD_TUNNEL6) &&
 	    (dev->type != ARPHRD_6LOWPAN) &&
-	    (dev->type != ARPHRD_IP6GRE) &&
-	    (dev->type != ARPHRD_IPGRE) &&
 	    (dev->type != ARPHRD_TUNNEL) &&
 	    (dev->type != ARPHRD_NONE) &&
 	    (dev->type != ARPHRD_RAWIP)) {
@@ -3391,14 +3392,14 @@ static void addrconf_sit_config(struct net_device *dev)
 		return;
 	}
 
-	sit_add_v4_addrs(idev);
+	add_v4_addrs(idev);
 
 	if (dev->flags&IFF_POINTOPOINT)
 		addrconf_add_mroute(dev);
 }
 #endif
 
-#if IS_ENABLED(CONFIG_NET_IPGRE)
+#if IS_ENABLED(CONFIG_NET_IPGRE) || IS_ENABLED(CONFIG_IPV6_GRE)
 static void addrconf_gre_config(struct net_device *dev)
 {
 	struct inet6_dev *idev;
@@ -3411,7 +3412,13 @@ static void addrconf_gre_config(struct net_device *dev)
 		return;
 	}
 
-	addrconf_addr_gen(idev, true);
+	if (dev->type == ARPHRD_ETHER) {
+		addrconf_addr_gen(idev, true);
+		return;
+	}
+
+	add_v4_addrs(idev);
+
 	if (dev->flags & IFF_POINTOPOINT)
 		addrconf_add_mroute(dev);
 }
@@ -3587,7 +3594,8 @@ static int addrconf_notify(struct notifier_block *this, unsigned long event,
 			addrconf_sit_config(dev);
 			break;
 #endif
-#if IS_ENABLED(CONFIG_NET_IPGRE)
+#if IS_ENABLED(CONFIG_NET_IPGRE) || IS_ENABLED(CONFIG_IPV6_GRE)
+		case ARPHRD_IP6GRE:
 		case ARPHRD_IPGRE:
 			addrconf_gre_config(dev);
 			break;
diff --git a/net/ipv6/ip6_gre.c b/net/ipv6/ip6_gre.c
index 7baf41d160f5..3ad201d372d8 100644
--- a/net/ipv6/ip6_gre.c
+++ b/net/ipv6/ip6_gre.c
@@ -629,8 +629,6 @@ drop:
 
 static int gre_handle_offloads(struct sk_buff *skb, bool csum)
 {
-	if (csum && skb_checksum_start(skb) < skb->data)
-		return -EINVAL;
 	return iptunnel_handle_offloads(skb,
 					csum ? SKB_GSO_GRE_CSUM : SKB_GSO_GRE);
 }
diff --git a/net/ipv6/mcast.c b/net/ipv6/mcast.c
index cd951faa2fac..bed8155508c8 100644
--- a/net/ipv6/mcast.c
+++ b/net/ipv6/mcast.c
@@ -1356,8 +1356,8 @@ static int mld_process_v1(struct inet6_dev *idev, struct mld_msg *mld,
 	return 0;
 }
 
-static int mld_process_v2(struct inet6_dev *idev, struct mld2_query *mld,
-			  unsigned long *max_delay)
+static void mld_process_v2(struct inet6_dev *idev, struct mld2_query *mld,
+			   unsigned long *max_delay)
 {
 	*max_delay = max(msecs_to_jiffies(mldv2_mrc(mld)), 1UL);
 
@@ -1367,7 +1367,7 @@ static int mld_process_v2(struct inet6_dev *idev, struct mld2_query *mld,
 
 	idev->mc_maxdelay = *max_delay;
 
-	return 0;
+	return;
 }
 
 /* called with rcu_read_lock() */
@@ -1454,9 +1454,7 @@ static void __mld_query_work(struct sk_buff *skb)
 
 		mlh2 = (struct mld2_query *)skb_transport_header(skb);
 
-		err = mld_process_v2(idev, mlh2, &max_delay);
-		if (err < 0)
-			goto out;
+		mld_process_v2(idev, mlh2, &max_delay);
 
 		if (group_type == IPV6_ADDR_ANY) { /* general query */
 			if (mlh2->mld2q_nsrcs)
diff --git a/net/ipv6/netfilter/nf_socket_ipv6.c b/net/ipv6/netfilter/nf_socket_ipv6.c
index 6fd54744cbc3..aa5bb8789ba0 100644
--- a/net/ipv6/netfilter/nf_socket_ipv6.c
+++ b/net/ipv6/netfilter/nf_socket_ipv6.c
@@ -99,7 +99,7 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
 {
 	__be16 dport, sport;
 	const struct in6_addr *daddr = NULL, *saddr = NULL;
-	struct ipv6hdr *iph = ipv6_hdr(skb);
+	struct ipv6hdr *iph = ipv6_hdr(skb), ipv6_var;
 	struct sk_buff *data_skb = NULL;
 	int doff = 0;
 	int thoff = 0, tproto;
@@ -129,8 +129,6 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
 			thoff + sizeof(*hp);
 
 	} else if (tproto == IPPROTO_ICMPV6) {
-		struct ipv6hdr ipv6_var;
-
 		if (extract_icmp6_fields(skb, thoff, &tproto, &saddr, &daddr,
 					 &sport, &dport, &ipv6_var))
 			return NULL;
diff --git a/net/ipv6/seg6_iptunnel.c b/net/ipv6/seg6_iptunnel.c
index 1bf5f5ae75ac..3adc5d9211ad 100644
--- a/net/ipv6/seg6_iptunnel.c
+++ b/net/ipv6/seg6_iptunnel.c
@@ -385,7 +385,7 @@ static int seg6_output_core(struct net *net, struct sock *sk,
 	struct dst_entry *orig_dst = skb_dst(skb);
 	struct dst_entry *dst = NULL;
 	struct seg6_lwt *slwt;
-	int err = -EINVAL;
+	int err;
 
 	err = seg6_do_srh(skb);
 	if (unlikely(err))
diff --git a/net/mac802154/iface.c b/net/mac802154/iface.c
index 1cf5ac09edcb..323d3d2d986f 100644
--- a/net/mac802154/iface.c
+++ b/net/mac802154/iface.c
@@ -617,7 +617,7 @@ ieee802154_if_add(struct ieee802154_local *local, const char *name,
 {
 	struct net_device *ndev = NULL;
 	struct ieee802154_sub_if_data *sdata = NULL;
-	int ret = -ENOMEM;
+	int ret;
 
 	ASSERT_RTNL();
 
diff --git a/net/mptcp/pm_netlink.c b/net/mptcp/pm_netlink.c
index 1e4289c507ff..c4f9a5ce3815 100644
--- a/net/mptcp/pm_netlink.c
+++ b/net/mptcp/pm_netlink.c
@@ -644,15 +644,12 @@ void mptcp_pm_nl_addr_send_ack(struct mptcp_sock *msk)
 	subflow = list_first_entry_or_null(&msk->conn_list, typeof(*subflow), node);
 	if (subflow) {
 		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
-		bool slow;
 
 		spin_unlock_bh(&msk->pm.lock);
 		pr_debug("send ack for %s",
 			 mptcp_pm_should_add_signal(msk) ? "add_addr" : "rm_addr");
 
-		slow = lock_sock_fast(ssk);
-		tcp_send_ack(ssk);
-		unlock_sock_fast(ssk, slow);
+		mptcp_subflow_send_ack(ssk);
 		spin_lock_bh(&msk->pm.lock);
 	}
 }
@@ -669,7 +666,6 @@ int mptcp_pm_nl_mp_prio_send_ack(struct mptcp_sock *msk,
 		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
 		struct sock *sk = (struct sock *)msk;
 		struct mptcp_addr_info local;
-		bool slow;
 
 		local_address((struct sock_common *)ssk, &local);
 		if (!addresses_equal(&local, addr, addr->port))
@@ -682,9 +678,7 @@ int mptcp_pm_nl_mp_prio_send_ack(struct mptcp_sock *msk,
 
 		spin_unlock_bh(&msk->pm.lock);
 		pr_debug("send ack for mp_prio");
-		slow = lock_sock_fast(ssk);
-		tcp_send_ack(ssk);
-		unlock_sock_fast(ssk, slow);
+		mptcp_subflow_send_ack(ssk);
 		spin_lock_bh(&msk->pm.lock);
 
 		return 0;
diff --git a/net/mptcp/protocol.c b/net/mptcp/protocol.c
index ade648c3512b..2602f1386160 100644
--- a/net/mptcp/protocol.c
+++ b/net/mptcp/protocol.c
@@ -440,19 +440,22 @@ static bool tcp_can_send_ack(const struct sock *ssk)
 	       (TCPF_SYN_SENT | TCPF_SYN_RECV | TCPF_TIME_WAIT | TCPF_CLOSE | TCPF_LISTEN));
 }
 
+void mptcp_subflow_send_ack(struct sock *ssk)
+{
+	bool slow;
+
+	slow = lock_sock_fast(ssk);
+	if (tcp_can_send_ack(ssk))
+		tcp_send_ack(ssk);
+	unlock_sock_fast(ssk, slow);
+}
+
 static void mptcp_send_ack(struct mptcp_sock *msk)
 {
 	struct mptcp_subflow_context *subflow;
 
-	mptcp_for_each_subflow(msk, subflow) {
-		struct sock *ssk = mptcp_subflow_tcp_sock(subflow);
-		bool slow;
-
-		slow = lock_sock_fast(ssk);
-		if (tcp_can_send_ack(ssk))
-			tcp_send_ack(ssk);
-		unlock_sock_fast(ssk, slow);
-	}
+	mptcp_for_each_subflow(msk, subflow)
+		mptcp_subflow_send_ack(mptcp_subflow_tcp_sock(subflow));
 }
 
 static void mptcp_subflow_cleanup_rbuf(struct sock *ssk)
@@ -1003,6 +1006,13 @@ static void mptcp_wmem_uncharge(struct sock *sk, int size)
 	msk->wmem_reserved += size;
 }
 
+static void __mptcp_mem_reclaim_partial(struct sock *sk)
+{
+	lockdep_assert_held_once(&sk->sk_lock.slock);
+	__mptcp_update_wmem(sk);
+	sk_mem_reclaim_partial(sk);
+}
+
 static void mptcp_mem_reclaim_partial(struct sock *sk)
 {
 	struct mptcp_sock *msk = mptcp_sk(sk);
@@ -1094,12 +1104,8 @@ static void __mptcp_clean_una(struct sock *sk)
 		msk->recovery = false;
 
 out:
-	if (cleaned) {
-		if (tcp_under_memory_pressure(sk)) {
-			__mptcp_update_wmem(sk);
-			sk_mem_reclaim_partial(sk);
-		}
-	}
+	if (cleaned && tcp_under_memory_pressure(sk))
+		__mptcp_mem_reclaim_partial(sk);
 
 	if (snd_una == READ_ONCE(msk->snd_nxt) && !msk->recovery) {
 		if (mptcp_timer_pending(sk) && !mptcp_data_fin_enabled(msk))
@@ -1179,6 +1185,7 @@ struct mptcp_sendmsg_info {
 	u16 limit;
 	u16 sent;
 	unsigned int flags;
+	bool data_lock_held;
 };
 
 static int mptcp_check_allowed_size(struct mptcp_sock *msk, u64 data_seq,
@@ -1250,17 +1257,17 @@ static bool __mptcp_alloc_tx_skb(struct sock *sk, struct sock *ssk, gfp_t gfp)
 	return false;
 }
 
-static bool mptcp_must_reclaim_memory(struct sock *sk, struct sock *ssk)
+static bool mptcp_alloc_tx_skb(struct sock *sk, struct sock *ssk, bool data_lock_held)
 {
-	return !ssk->sk_tx_skb_cache &&
-	       tcp_under_memory_pressure(sk);
-}
+	gfp_t gfp = data_lock_held ? GFP_ATOMIC : sk->sk_allocation;
 
-static bool mptcp_alloc_tx_skb(struct sock *sk, struct sock *ssk)
-{
-	if (unlikely(mptcp_must_reclaim_memory(sk, ssk)))
-		mptcp_mem_reclaim_partial(sk);
-	return __mptcp_alloc_tx_skb(sk, ssk, sk->sk_allocation);
+	if (unlikely(tcp_under_memory_pressure(sk))) {
+		if (data_lock_held)
+			__mptcp_mem_reclaim_partial(sk);
+		else
+			mptcp_mem_reclaim_partial(sk);
+	}
+	return __mptcp_alloc_tx_skb(sk, ssk, gfp);
 }
 
 /* note: this always recompute the csum on the whole skb, even
@@ -1284,7 +1291,7 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 	bool zero_window_probe = false;
 	struct mptcp_ext *mpext = NULL;
 	struct sk_buff *skb, *tail;
-	bool can_collapse = false;
+	bool must_collapse = false;
 	int size_bias = 0;
 	int avail_size;
 	size_t ret = 0;
@@ -1304,16 +1311,24 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 		 * SSN association set here
 		 */
 		mpext = skb_ext_find(skb, SKB_EXT_MPTCP);
-		can_collapse = (info->size_goal - skb->len > 0) &&
-			 mptcp_skb_can_collapse_to(data_seq, skb, mpext);
-		if (!can_collapse) {
+		if (!mptcp_skb_can_collapse_to(data_seq, skb, mpext)) {
 			TCP_SKB_CB(skb)->eor = 1;
-		} else {
+			goto alloc_skb;
+		}
+
+		must_collapse = (info->size_goal - skb->len > 0) &&
+				(skb_shinfo(skb)->nr_frags < sysctl_max_skb_frags);
+		if (must_collapse) {
 			size_bias = skb->len;
 			avail_size = info->size_goal - skb->len;
 		}
 	}
 
+alloc_skb:
+	if (!must_collapse && !ssk->sk_tx_skb_cache &&
+	    !mptcp_alloc_tx_skb(sk, ssk, info->data_lock_held))
+		return 0;
+
 	/* Zero window and all data acked? Probe. */
 	avail_size = mptcp_check_allowed_size(msk, data_seq, avail_size);
 	if (avail_size == 0) {
@@ -1343,7 +1358,6 @@ static int mptcp_sendmsg_frag(struct sock *sk, struct sock *ssk,
 	if (skb == tail) {
 		TCP_SKB_CB(tail)->tcp_flags &= ~TCPHDR_PSH;
 		mpext->data_len += ret;
-		WARN_ON_ONCE(!can_collapse);
 		WARN_ON_ONCE(zero_window_probe);
 		goto out;
 	}
@@ -1530,15 +1544,6 @@ void __mptcp_push_pending(struct sock *sk, unsigned int flags)
 			if (ssk != prev_ssk)
 				lock_sock(ssk);
 
-			/* keep it simple and always provide a new skb for the
-			 * subflow, even if we will not use it when collapsing
-			 * on the pending one
-			 */
-			if (!mptcp_alloc_tx_skb(sk, ssk)) {
-				mptcp_push_release(sk, ssk, &info);
-				goto out;
-			}
-
 			ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
 			if (ret <= 0) {
 				mptcp_push_release(sk, ssk, &info);
@@ -1571,7 +1576,9 @@ out:
 static void __mptcp_subflow_push_pending(struct sock *sk, struct sock *ssk)
 {
 	struct mptcp_sock *msk = mptcp_sk(sk);
-	struct mptcp_sendmsg_info info;
+	struct mptcp_sendmsg_info info = {
+		.data_lock_held = true,
+	};
 	struct mptcp_data_frag *dfrag;
 	struct sock *xmit_ssk;
 	int len, copied = 0;
@@ -1597,13 +1604,6 @@ static void __mptcp_subflow_push_pending(struct sock *sk, struct sock *ssk)
 				goto out;
 			}
 
-			if (unlikely(mptcp_must_reclaim_memory(sk, ssk))) {
-				__mptcp_update_wmem(sk);
-				sk_mem_reclaim_partial(sk);
-			}
-			if (!__mptcp_alloc_tx_skb(sk, ssk, GFP_ATOMIC))
-				goto out;
-
 			ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
 			if (ret <= 0)
 				goto out;
@@ -2409,9 +2409,6 @@ static void __mptcp_retrans(struct sock *sk)
 	info.sent = 0;
 	info.limit = READ_ONCE(msk->csum_enabled) ? dfrag->data_len : dfrag->already_sent;
 	while (info.sent < info.limit) {
-		if (!mptcp_alloc_tx_skb(sk, ssk))
-			break;
-
 		ret = mptcp_sendmsg_frag(sk, ssk, dfrag, &info);
 		if (ret <= 0)
 			break;
diff --git a/net/mptcp/protocol.h b/net/mptcp/protocol.h
index d7aba1c4dc48..d3e6fd1615f1 100644
--- a/net/mptcp/protocol.h
+++ b/net/mptcp/protocol.h
@@ -34,7 +34,7 @@
 #define OPTIONS_MPTCP_MPC	(OPTION_MPTCP_MPC_SYN | OPTION_MPTCP_MPC_SYNACK | \
 				 OPTION_MPTCP_MPC_ACK)
 #define OPTIONS_MPTCP_MPJ	(OPTION_MPTCP_MPJ_SYN | OPTION_MPTCP_MPJ_SYNACK | \
-				 OPTION_MPTCP_MPJ_SYNACK)
+				 OPTION_MPTCP_MPJ_ACK)
 
 /* MPTCP option subtypes */
 #define MPTCPOPT_MP_CAPABLE	0
@@ -573,6 +573,7 @@ void __init mptcp_subflow_init(void);
 void mptcp_subflow_shutdown(struct sock *sk, struct sock *ssk, int how);
 void mptcp_close_ssk(struct sock *sk, struct sock *ssk,
 		     struct mptcp_subflow_context *subflow);
+void mptcp_subflow_send_ack(struct sock *ssk);
 void mptcp_subflow_reset(struct sock *ssk);
 void mptcp_sock_graft(struct sock *sk, struct socket *parent);
 struct socket *__mptcp_nmpc_socket(const struct mptcp_sock *msk);
diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h
index 0b6cfd3b31e0..03757e76bb6b 100644
--- a/net/ncsi/internal.h
+++ b/net/ncsi/internal.h
@@ -80,6 +80,7 @@ enum {
 #define NCSI_OEM_MFR_BCM_ID             0x113d
 #define NCSI_OEM_MFR_INTEL_ID           0x157
 /* Intel specific OEM command */
+#define NCSI_OEM_INTEL_CMD_GMA          0x06   /* CMD ID for Get MAC */
 #define NCSI_OEM_INTEL_CMD_KEEP_PHY     0x20   /* CMD ID for Keep PHY up */
 /* Broadcom specific OEM Command */
 #define NCSI_OEM_BCM_CMD_GMA            0x01   /* CMD ID for Get MAC */
@@ -89,6 +90,7 @@ enum {
 #define NCSI_OEM_MLX_CMD_SMAF           0x01   /* CMD ID for Set MC Affinity */
 #define NCSI_OEM_MLX_CMD_SMAF_PARAM     0x07   /* Parameter for SMAF         */
 /* OEM Command payload lengths*/
+#define NCSI_OEM_INTEL_CMD_GMA_LEN      5
 #define NCSI_OEM_INTEL_CMD_KEEP_PHY_LEN 7
 #define NCSI_OEM_BCM_CMD_GMA_LEN        12
 #define NCSI_OEM_MLX_CMD_GMA_LEN        8
@@ -99,6 +101,7 @@ enum {
 /* Mac address offset in OEM response */
 #define BCM_MAC_ADDR_OFFSET             28
 #define MLX_MAC_ADDR_OFFSET             8
+#define INTEL_MAC_ADDR_OFFSET           1
 
 
 struct ncsi_channel_version {
diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
index 89c7742cd72e..7121ce2a47c0 100644
--- a/net/ncsi/ncsi-manage.c
+++ b/net/ncsi/ncsi-manage.c
@@ -795,13 +795,36 @@ static int ncsi_oem_smaf_mlx(struct ncsi_cmd_arg *nca)
 	return ret;
 }
 
+static int ncsi_oem_gma_handler_intel(struct ncsi_cmd_arg *nca)
+{
+	unsigned char data[NCSI_OEM_INTEL_CMD_GMA_LEN];
+	int ret = 0;
+
+	nca->payload = NCSI_OEM_INTEL_CMD_GMA_LEN;
+
+	memset(data, 0, NCSI_OEM_INTEL_CMD_GMA_LEN);
+	*(unsigned int *)data = ntohl((__force __be32)NCSI_OEM_MFR_INTEL_ID);
+	data[4] = NCSI_OEM_INTEL_CMD_GMA;
+
+	nca->data = data;
+
+	ret = ncsi_xmit_cmd(nca);
+	if (ret)
+		netdev_err(nca->ndp->ndev.dev,
+			   "NCSI: Failed to transmit cmd 0x%x during configure\n",
+			   nca->type);
+
+	return ret;
+}
+
 /* OEM Command handlers initialization */
 static struct ncsi_oem_gma_handler {
 	unsigned int	mfr_id;
 	int		(*handler)(struct ncsi_cmd_arg *nca);
 } ncsi_oem_gma_handlers[] = {
 	{ NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm },
-	{ NCSI_OEM_MFR_MLX_ID, ncsi_oem_gma_handler_mlx }
+	{ NCSI_OEM_MFR_MLX_ID, ncsi_oem_gma_handler_mlx },
+	{ NCSI_OEM_MFR_INTEL_ID, ncsi_oem_gma_handler_intel }
 };
 
 static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id)
diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h
index 80938b338fee..ba66c7dc3a21 100644
--- a/net/ncsi/ncsi-pkt.h
+++ b/net/ncsi/ncsi-pkt.h
@@ -178,6 +178,12 @@ struct ncsi_rsp_oem_bcm_pkt {
 	unsigned char           data[];      /* Cmd specific Data */
 };
 
+/* Intel Response Data */
+struct ncsi_rsp_oem_intel_pkt {
+	unsigned char           cmd;         /* OEM Command ID    */
+	unsigned char           data[];      /* Cmd specific Data */
+};
+
 /* Get Link Status */
 struct ncsi_rsp_gls_pkt {
 	struct ncsi_rsp_pkt_hdr rsp;        /* Response header   */
diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c
index d48374894817..6447a09932f5 100644
--- a/net/ncsi/ncsi-rsp.c
+++ b/net/ncsi/ncsi-rsp.c
@@ -699,9 +699,51 @@ static int ncsi_rsp_handler_oem_bcm(struct ncsi_request *nr)
 	return 0;
 }
 
+/* Response handler for Intel command Get Mac Address */
+static int ncsi_rsp_handler_oem_intel_gma(struct ncsi_request *nr)
+{
+	struct ncsi_dev_priv *ndp = nr->ndp;
+	struct net_device *ndev = ndp->ndev.dev;
+	const struct net_device_ops *ops = ndev->netdev_ops;
+	struct ncsi_rsp_oem_pkt *rsp;
+	struct sockaddr saddr;
+	int ret = 0;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+
+	saddr.sa_family = ndev->type;
+	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+	memcpy(saddr.sa_data, &rsp->data[INTEL_MAC_ADDR_OFFSET], ETH_ALEN);
+	/* Increase mac address by 1 for BMC's address */
+	eth_addr_inc((u8 *)saddr.sa_data);
+	if (!is_valid_ether_addr((const u8 *)saddr.sa_data))
+		return -ENXIO;
+
+	/* Set the flag for GMA command which should only be called once */
+	ndp->gma_flag = 1;
+
+	ret = ops->ndo_set_mac_address(ndev, &saddr);
+	if (ret < 0)
+		netdev_warn(ndev,
+			    "NCSI: 'Writing mac address to device failed\n");
+
+	return ret;
+}
+
 /* Response handler for Intel card */
 static int ncsi_rsp_handler_oem_intel(struct ncsi_request *nr)
 {
+	struct ncsi_rsp_oem_intel_pkt *intel;
+	struct ncsi_rsp_oem_pkt *rsp;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+	intel = (struct ncsi_rsp_oem_intel_pkt *)(rsp->data);
+
+	if (intel->cmd == NCSI_OEM_INTEL_CMD_GMA)
+		return ncsi_rsp_handler_oem_intel_gma(nr);
+
 	return 0;
 }
 
diff --git a/net/netfilter/nf_conntrack_core.c b/net/netfilter/nf_conntrack_core.c
index d31dbccbe7bd..94e18fb9690d 100644
--- a/net/netfilter/nf_conntrack_core.c
+++ b/net/netfilter/nf_conntrack_core.c
@@ -21,7 +21,6 @@
 #include <linux/stddef.h>
 #include <linux/slab.h>
 #include <linux/random.h>
-#include <linux/jhash.h>
 #include <linux/siphash.h>
 #include <linux/err.h>
 #include <linux/percpu.h>
@@ -78,6 +77,8 @@ static __read_mostly bool nf_conntrack_locks_all;
 #define GC_SCAN_INTERVAL	(120u * HZ)
 #define GC_SCAN_MAX_DURATION	msecs_to_jiffies(10)
 
+#define MAX_CHAINLEN	64u
+
 static struct conntrack_gc_work conntrack_gc_work;
 
 void nf_conntrack_lock(spinlock_t *lock) __acquires(lock)
@@ -184,25 +185,31 @@ EXPORT_SYMBOL_GPL(nf_conntrack_htable_size);
 unsigned int nf_conntrack_max __read_mostly;
 EXPORT_SYMBOL_GPL(nf_conntrack_max);
 seqcount_spinlock_t nf_conntrack_generation __read_mostly;
-static unsigned int nf_conntrack_hash_rnd __read_mostly;
+static siphash_key_t nf_conntrack_hash_rnd __read_mostly;
 
 static u32 hash_conntrack_raw(const struct nf_conntrack_tuple *tuple,
 			      const struct net *net)
 {
-	unsigned int n;
-	u32 seed;
+	struct {
+		struct nf_conntrack_man src;
+		union nf_inet_addr dst_addr;
+		u32 net_mix;
+		u16 dport;
+		u16 proto;
+	} __aligned(SIPHASH_ALIGNMENT) combined;
 
 	get_random_once(&nf_conntrack_hash_rnd, sizeof(nf_conntrack_hash_rnd));
 
-	/* The direction must be ignored, so we hash everything up to the
-	 * destination ports (which is a multiple of 4) and treat the last
-	 * three bytes manually.
-	 */
-	seed = nf_conntrack_hash_rnd ^ net_hash_mix(net);
-	n = (sizeof(tuple->src) + sizeof(tuple->dst.u3)) / sizeof(u32);
-	return jhash2((u32 *)tuple, n, seed ^
-		      (((__force __u16)tuple->dst.u.all << 16) |
-		      tuple->dst.protonum));
+	memset(&combined, 0, sizeof(combined));
+
+	/* The direction must be ignored, so handle usable members manually. */
+	combined.src = tuple->src;
+	combined.dst_addr = tuple->dst.u3;
+	combined.net_mix = net_hash_mix(net);
+	combined.dport = (__force __u16)tuple->dst.u.all;
+	combined.proto = tuple->dst.protonum;
+
+	return (u32)siphash(&combined, sizeof(combined), &nf_conntrack_hash_rnd);
 }
 
 static u32 scale_hash(u32 hash)
@@ -835,7 +842,9 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct)
 	unsigned int hash, reply_hash;
 	struct nf_conntrack_tuple_hash *h;
 	struct hlist_nulls_node *n;
+	unsigned int chainlen = 0;
 	unsigned int sequence;
+	int err = -EEXIST;
 
 	zone = nf_ct_zone(ct);
 
@@ -849,15 +858,24 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct)
 	} while (nf_conntrack_double_lock(net, hash, reply_hash, sequence));
 
 	/* See if there's one in the list already, including reverse */
-	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode)
+	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode) {
 		if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
 				    zone, net))
 			goto out;
 
-	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[reply_hash], hnnode)
+		if (chainlen++ > MAX_CHAINLEN)
+			goto chaintoolong;
+	}
+
+	chainlen = 0;
+
+	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[reply_hash], hnnode) {
 		if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple,
 				    zone, net))
 			goto out;
+		if (chainlen++ > MAX_CHAINLEN)
+			goto chaintoolong;
+	}
 
 	smp_wmb();
 	/* The caller holds a reference to this object */
@@ -867,11 +885,13 @@ nf_conntrack_hash_check_insert(struct nf_conn *ct)
 	NF_CT_STAT_INC(net, insert);
 	local_bh_enable();
 	return 0;
-
+chaintoolong:
+	NF_CT_STAT_INC(net, chaintoolong);
+	err = -ENOSPC;
 out:
 	nf_conntrack_double_unlock(hash, reply_hash);
 	local_bh_enable();
-	return -EEXIST;
+	return err;
 }
 EXPORT_SYMBOL_GPL(nf_conntrack_hash_check_insert);
 
@@ -1084,6 +1104,7 @@ int
 __nf_conntrack_confirm(struct sk_buff *skb)
 {
 	const struct nf_conntrack_zone *zone;
+	unsigned int chainlen = 0, sequence;
 	unsigned int hash, reply_hash;
 	struct nf_conntrack_tuple_hash *h;
 	struct nf_conn *ct;
@@ -1091,7 +1112,6 @@ __nf_conntrack_confirm(struct sk_buff *skb)
 	struct hlist_nulls_node *n;
 	enum ip_conntrack_info ctinfo;
 	struct net *net;
-	unsigned int sequence;
 	int ret = NF_DROP;
 
 	ct = nf_ct_get(skb, &ctinfo);
@@ -1151,15 +1171,28 @@ __nf_conntrack_confirm(struct sk_buff *skb)
 	/* See if there's one in the list already, including reverse:
 	   NAT could have grabbed it without realizing, since we're
 	   not in the hash.  If there is, we lost race. */
-	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode)
+	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[hash], hnnode) {
 		if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple,
 				    zone, net))
 			goto out;
+		if (chainlen++ > MAX_CHAINLEN)
+			goto chaintoolong;
+	}
 
-	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[reply_hash], hnnode)
+	chainlen = 0;
+	hlist_nulls_for_each_entry(h, n, &nf_conntrack_hash[reply_hash], hnnode) {
 		if (nf_ct_key_equal(h, &ct->tuplehash[IP_CT_DIR_REPLY].tuple,
 				    zone, net))
 			goto out;
+		if (chainlen++ > MAX_CHAINLEN) {
+chaintoolong:
+			nf_ct_add_to_dying_list(ct);
+			NF_CT_STAT_INC(net, chaintoolong);
+			NF_CT_STAT_INC(net, insert_failed);
+			ret = NF_DROP;
+			goto dying;
+		}
+	}
 
 	/* Timer relative to confirmation time, not original
 	   setting time, otherwise we'd get timer wrap in
@@ -2594,26 +2627,24 @@ int nf_conntrack_init_start(void)
 		spin_lock_init(&nf_conntrack_locks[i]);
 
 	if (!nf_conntrack_htable_size) {
-		/* Idea from tcp.c: use 1/16384 of memory.
-		 * On i386: 32MB machine has 512 buckets.
-		 * >= 1GB machines have 16384 buckets.
-		 * >= 4GB machines have 65536 buckets.
-		 */
 		nf_conntrack_htable_size
 			= (((nr_pages << PAGE_SHIFT) / 16384)
 			   / sizeof(struct hlist_head));
-		if (nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
-			nf_conntrack_htable_size = 65536;
+		if (BITS_PER_LONG >= 64 &&
+		    nr_pages > (4 * (1024 * 1024 * 1024 / PAGE_SIZE)))
+			nf_conntrack_htable_size = 262144;
 		else if (nr_pages > (1024 * 1024 * 1024 / PAGE_SIZE))
-			nf_conntrack_htable_size = 16384;
-		if (nf_conntrack_htable_size < 32)
-			nf_conntrack_htable_size = 32;
-
-		/* Use a max. factor of four by default to get the same max as
-		 * with the old struct list_heads. When a table size is given
-		 * we use the old value of 8 to avoid reducing the max.
-		 * entries. */
-		max_factor = 4;
+			nf_conntrack_htable_size = 65536;
+
+		if (nf_conntrack_htable_size < 1024)
+			nf_conntrack_htable_size = 1024;
+		/* Use a max. factor of one by default to keep the average
+		 * hash chain length at 2 entries.  Each entry has to be added
+		 * twice (once for original direction, once for reply).
+		 * When a table size is given we use the old value of 8 to
+		 * avoid implicit reduction of the max entries setting.
+		 */
+		max_factor = 1;
 	}
 
 	nf_conntrack_hash = nf_ct_alloc_hashtable(&nf_conntrack_htable_size, 1);
diff --git a/net/netfilter/nf_conntrack_expect.c b/net/netfilter/nf_conntrack_expect.c
index 1e851bc2e61a..f562eeef4234 100644
--- a/net/netfilter/nf_conntrack_expect.c
+++ b/net/netfilter/nf_conntrack_expect.c
@@ -17,7 +17,7 @@
 #include <linux/err.h>
 #include <linux/percpu.h>
 #include <linux/kernel.h>
-#include <linux/jhash.h>
+#include <linux/siphash.h>
 #include <linux/moduleparam.h>
 #include <linux/export.h>
 #include <net/net_namespace.h>
@@ -41,7 +41,7 @@ EXPORT_SYMBOL_GPL(nf_ct_expect_hash);
 unsigned int nf_ct_expect_max __read_mostly;
 
 static struct kmem_cache *nf_ct_expect_cachep __read_mostly;
-static unsigned int nf_ct_expect_hashrnd __read_mostly;
+static siphash_key_t nf_ct_expect_hashrnd __read_mostly;
 
 /* nf_conntrack_expect helper functions */
 void nf_ct_unlink_expect_report(struct nf_conntrack_expect *exp,
@@ -81,15 +81,26 @@ static void nf_ct_expectation_timed_out(struct timer_list *t)
 
 static unsigned int nf_ct_expect_dst_hash(const struct net *n, const struct nf_conntrack_tuple *tuple)
 {
-	unsigned int hash, seed;
+	struct {
+		union nf_inet_addr dst_addr;
+		u32 net_mix;
+		u16 dport;
+		u8 l3num;
+		u8 protonum;
+	} __aligned(SIPHASH_ALIGNMENT) combined;
+	u32 hash;
 
 	get_random_once(&nf_ct_expect_hashrnd, sizeof(nf_ct_expect_hashrnd));
 
-	seed = nf_ct_expect_hashrnd ^ net_hash_mix(n);
+	memset(&combined, 0, sizeof(combined));
 
-	hash = jhash2(tuple->dst.u3.all, ARRAY_SIZE(tuple->dst.u3.all),
-		      (((tuple->dst.protonum ^ tuple->src.l3num) << 16) |
-		       (__force __u16)tuple->dst.u.all) ^ seed);
+	combined.dst_addr = tuple->dst.u3;
+	combined.net_mix = net_hash_mix(n);
+	combined.dport = (__force __u16)tuple->dst.u.all;
+	combined.l3num = tuple->src.l3num;
+	combined.protonum = tuple->dst.protonum;
+
+	hash = siphash(&combined, sizeof(combined), &nf_ct_expect_hashrnd);
 
 	return reciprocal_scale(hash, nf_ct_expect_hsize);
 }
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index 5f9fc6b94855..f1e5443fe7c7 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -2528,7 +2528,9 @@ ctnetlink_ct_stat_cpu_fill_info(struct sk_buff *skb, u32 portid, u32 seq,
 	    nla_put_be32(skb, CTA_STATS_SEARCH_RESTART,
 				htonl(st->search_restart)) ||
 	    nla_put_be32(skb, CTA_STATS_CLASH_RESOLVE,
-				htonl(st->clash_resolve)))
+				htonl(st->clash_resolve)) ||
+	    nla_put_be32(skb, CTA_STATS_CHAIN_TOOLONG,
+			 htonl(st->chaintoolong)))
 		goto nla_put_failure;
 
 	nlmsg_end(skb, nlh);
diff --git a/net/netfilter/nf_conntrack_standalone.c b/net/netfilter/nf_conntrack_standalone.c
index 7e0d956da51d..80f675d884b2 100644
--- a/net/netfilter/nf_conntrack_standalone.c
+++ b/net/netfilter/nf_conntrack_standalone.c
@@ -432,7 +432,7 @@ static int ct_cpu_seq_show(struct seq_file *seq, void *v)
 	unsigned int nr_conntracks;
 
 	if (v == SEQ_START_TOKEN) {
-		seq_puts(seq, "entries  clashres found new invalid ignore delete delete_list insert insert_failed drop early_drop icmp_error  expect_new expect_create expect_delete search_restart\n");
+		seq_puts(seq, "entries  clashres found new invalid ignore delete chainlength insert insert_failed drop early_drop icmp_error  expect_new expect_create expect_delete search_restart\n");
 		return 0;
 	}
 
@@ -447,7 +447,7 @@ static int ct_cpu_seq_show(struct seq_file *seq, void *v)
 		   st->invalid,
 		   0,
 		   0,
-		   0,
+		   st->chaintoolong,
 		   st->insert,
 		   st->insert_failed,
 		   st->drop,
diff --git a/net/netfilter/nf_nat_core.c b/net/netfilter/nf_nat_core.c
index 7de595ead06a..7008961f5cb0 100644
--- a/net/netfilter/nf_nat_core.c
+++ b/net/netfilter/nf_nat_core.c
@@ -13,7 +13,7 @@
 #include <linux/skbuff.h>
 #include <linux/gfp.h>
 #include <net/xfrm.h>
-#include <linux/jhash.h>
+#include <linux/siphash.h>
 #include <linux/rtnetlink.h>
 
 #include <net/netfilter/nf_conntrack.h>
@@ -34,7 +34,7 @@ static unsigned int nat_net_id __read_mostly;
 
 static struct hlist_head *nf_nat_bysource __read_mostly;
 static unsigned int nf_nat_htable_size __read_mostly;
-static unsigned int nf_nat_hash_rnd __read_mostly;
+static siphash_key_t nf_nat_hash_rnd __read_mostly;
 
 struct nf_nat_lookup_hook_priv {
 	struct nf_hook_entries __rcu *entries;
@@ -153,12 +153,22 @@ static unsigned int
 hash_by_src(const struct net *n, const struct nf_conntrack_tuple *tuple)
 {
 	unsigned int hash;
+	struct {
+		struct nf_conntrack_man src;
+		u32 net_mix;
+		u32 protonum;
+	} __aligned(SIPHASH_ALIGNMENT) combined;
 
 	get_random_once(&nf_nat_hash_rnd, sizeof(nf_nat_hash_rnd));
 
+	memset(&combined, 0, sizeof(combined));
+
 	/* Original src, to ensure we map it consistently if poss. */
-	hash = jhash2((u32 *)&tuple->src, sizeof(tuple->src) / sizeof(u32),
-		      tuple->dst.protonum ^ nf_nat_hash_rnd ^ net_hash_mix(n));
+	combined.src = tuple->src;
+	combined.net_mix = net_hash_mix(n);
+	combined.protonum = tuple->dst.protonum;
+
+	hash = siphash(&combined, sizeof(combined), &nf_nat_hash_rnd);
 
 	return reciprocal_scale(hash, nf_nat_htable_size);
 }
diff --git a/net/netfilter/nft_ct.c b/net/netfilter/nft_ct.c
index 337e22d8b40b..99b1de14ff7e 100644
--- a/net/netfilter/nft_ct.c
+++ b/net/netfilter/nft_ct.c
@@ -41,6 +41,7 @@ struct nft_ct_helper_obj  {
 #ifdef CONFIG_NF_CONNTRACK_ZONES
 static DEFINE_PER_CPU(struct nf_conn *, nft_ct_pcpu_template);
 static unsigned int nft_ct_pcpu_template_refcnt __read_mostly;
+static DEFINE_MUTEX(nft_ct_pcpu_mutex);
 #endif
 
 static u64 nft_ct_get_eval_counter(const struct nf_conn_counter *c,
@@ -525,8 +526,10 @@ static void __nft_ct_set_destroy(const struct nft_ctx *ctx, struct nft_ct *priv)
 #endif
 #ifdef CONFIG_NF_CONNTRACK_ZONES
 	case NFT_CT_ZONE:
+		mutex_lock(&nft_ct_pcpu_mutex);
 		if (--nft_ct_pcpu_template_refcnt == 0)
 			nft_ct_tmpl_put_pcpu();
+		mutex_unlock(&nft_ct_pcpu_mutex);
 		break;
 #endif
 	default:
@@ -564,9 +567,13 @@ static int nft_ct_set_init(const struct nft_ctx *ctx,
 #endif
 #ifdef CONFIG_NF_CONNTRACK_ZONES
 	case NFT_CT_ZONE:
-		if (!nft_ct_tmpl_alloc_pcpu())
+		mutex_lock(&nft_ct_pcpu_mutex);
+		if (!nft_ct_tmpl_alloc_pcpu()) {
+			mutex_unlock(&nft_ct_pcpu_mutex);
 			return -ENOMEM;
+		}
 		nft_ct_pcpu_template_refcnt++;
+		mutex_unlock(&nft_ct_pcpu_mutex);
 		len = sizeof(u16);
 		break;
 #endif
diff --git a/net/qrtr/qrtr.c b/net/qrtr/qrtr.c
index 525e3ea063b1..ec2322529727 100644
--- a/net/qrtr/qrtr.c
+++ b/net/qrtr/qrtr.c
@@ -493,7 +493,7 @@ int qrtr_endpoint_post(struct qrtr_endpoint *ep, const void *data, size_t len)
 		goto err;
 	}
 
-	if (!size || size & 3 || len != size + hdrlen)
+	if (!size || len != ALIGN(size, 4) + hdrlen)
 		goto err;
 
 	if (cb->dst_port != QRTR_PORT_CTRL && cb->type != QRTR_TYPE_DATA &&
diff --git a/net/sched/sch_fq_codel.c b/net/sched/sch_fq_codel.c
index c4afdd026f51..bb0cd6d3d2c2 100644
--- a/net/sched/sch_fq_codel.c
+++ b/net/sched/sch_fq_codel.c
@@ -369,6 +369,7 @@ static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt,
 {
 	struct fq_codel_sched_data *q = qdisc_priv(sch);
 	struct nlattr *tb[TCA_FQ_CODEL_MAX + 1];
+	u32 quantum = 0;
 	int err;
 
 	if (!opt)
@@ -386,6 +387,13 @@ static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt,
 		    q->flows_cnt > 65536)
 			return -EINVAL;
 	}
+	if (tb[TCA_FQ_CODEL_QUANTUM]) {
+		quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM]));
+		if (quantum > FQ_CODEL_QUANTUM_MAX) {
+			NL_SET_ERR_MSG(extack, "Invalid quantum");
+			return -EINVAL;
+		}
+	}
 	sch_tree_lock(sch);
 
 	if (tb[TCA_FQ_CODEL_TARGET]) {
@@ -412,8 +420,8 @@ static int fq_codel_change(struct Qdisc *sch, struct nlattr *opt,
 	if (tb[TCA_FQ_CODEL_ECN])
 		q->cparams.ecn = !!nla_get_u32(tb[TCA_FQ_CODEL_ECN]);
 
-	if (tb[TCA_FQ_CODEL_QUANTUM])
-		q->quantum = max(256U, nla_get_u32(tb[TCA_FQ_CODEL_QUANTUM]));
+	if (quantum)
+		q->quantum = quantum;
 
 	if (tb[TCA_FQ_CODEL_DROP_BATCH_SIZE])
 		q->drop_batch_size = max(1U, nla_get_u32(tb[TCA_FQ_CODEL_DROP_BATCH_SIZE]));
diff --git a/net/sunrpc/auth_gss/svcauth_gss.c b/net/sunrpc/auth_gss/svcauth_gss.c
index 9de41e7f2d07..3e776e3dff91 100644
--- a/net/sunrpc/auth_gss/svcauth_gss.c
+++ b/net/sunrpc/auth_gss/svcauth_gss.c
@@ -194,6 +194,8 @@ static void rsi_request(struct cache_detail *cd,
 	qword_addhex(bpp, blen, rsii->in_handle.data, rsii->in_handle.len);
 	qword_addhex(bpp, blen, rsii->in_token.data, rsii->in_token.len);
 	(*bpp)[-1] = '\n';
+	WARN_ONCE(*blen < 0,
+		  "RPCSEC/GSS credential too large - please use gssproxy\n");
 }
 
 static int rsi_parse(struct cache_detail *cd,
diff --git a/net/sunrpc/cache.c b/net/sunrpc/cache.c
index 1a2c1c44bb00..59641803472c 100644
--- a/net/sunrpc/cache.c
+++ b/net/sunrpc/cache.c
@@ -803,7 +803,7 @@ static int cache_request(struct cache_detail *detail,
 
 	detail->cache_request(detail, crq->item, &bp, &len);
 	if (len < 0)
-		return -EAGAIN;
+		return -E2BIG;
 	return PAGE_SIZE - len;
 }
 
diff --git a/net/sunrpc/svc_xprt.c b/net/sunrpc/svc_xprt.c
index e1153cba9cc6..6316bd2b8f37 100644
--- a/net/sunrpc/svc_xprt.c
+++ b/net/sunrpc/svc_xprt.c
@@ -663,7 +663,7 @@ static int svc_alloc_arg(struct svc_rqst *rqstp)
 {
 	struct svc_serv *serv = rqstp->rq_server;
 	struct xdr_buf *arg = &rqstp->rq_arg;
-	unsigned long pages, filled;
+	unsigned long pages, filled, ret;
 
 	pagevec_init(&rqstp->rq_pvec);
 
@@ -675,11 +675,12 @@ static int svc_alloc_arg(struct svc_rqst *rqstp)
 		pages = RPCSVC_MAXPAGES;
 	}
 
-	for (;;) {
-		filled = alloc_pages_bulk_array(GFP_KERNEL, pages,
-						rqstp->rq_pages);
-		if (filled == pages)
-			break;
+	for (filled = 0; filled < pages; filled = ret) {
+		ret = alloc_pages_bulk_array(GFP_KERNEL, pages,
+					     rqstp->rq_pages);
+		if (ret > filled)
+			/* Made progress, don't sleep yet */
+			continue;
 
 		set_current_state(TASK_INTERRUPTIBLE);
 		if (signalled() || kthread_should_stop()) {
diff --git a/net/tipc/socket.c b/net/tipc/socket.c
index e3105ba407c7..a0a27d87f631 100644
--- a/net/tipc/socket.c
+++ b/net/tipc/socket.c
@@ -1426,7 +1426,7 @@ static int __tipc_sendmsg(struct socket *sock, struct msghdr *m, size_t dlen)
 	if (ua) {
 		if (!tipc_uaddr_valid(ua, m->msg_namelen))
 			return -EINVAL;
-		 atype = ua->addrtype;
+		atype = ua->addrtype;
 	}
 
 	/* If socket belongs to a communication group follow other paths */
diff --git a/samples/kdb/kdb_hello.c b/samples/kdb/kdb_hello.c
index c1c2fa0f62c2..82736e5a5e32 100644
--- a/samples/kdb/kdb_hello.c
+++ b/samples/kdb/kdb_hello.c
@@ -28,28 +28,26 @@ static int kdb_hello_cmd(int argc, const char **argv)
 	return 0;
 }
 
+static kdbtab_t hello_cmd = {
+	.name = "hello",
+	.func = kdb_hello_cmd,
+	.usage = "[string]",
+	.help = "Say Hello World or Hello [string]",
+};
 
 static int __init kdb_hello_cmd_init(void)
 {
 	/*
 	 * Registration of a dynamically added kdb command is done with
-	 * kdb_register() with the arguments being:
-	 *   1: The name of the shell command
-	 *   2: The function that processes the command
-	 *   3: Description of the usage of any arguments
-	 *   4: Descriptive text when you run help
-	 *   5: Number of characters to complete the command
-	 *      0 == type the whole command
-	 *      1 == match both "g" and "go" for example
+	 * kdb_register().
 	 */
-	kdb_register("hello", kdb_hello_cmd, "[string]",
-		     "Say Hello World or Hello [string]", 0);
+	kdb_register(&hello_cmd);
 	return 0;
 }
 
 static void __exit kdb_hello_cmd_exit(void)
 {
-	kdb_unregister("hello");
+	kdb_unregister(&hello_cmd);
 }
 
 module_init(kdb_hello_cmd_init);
diff --git a/scripts/check_extable.sh b/scripts/check_extable.sh
index 93af93c7b346..4b380564cf74 100755
--- a/scripts/check_extable.sh
+++ b/scripts/check_extable.sh
@@ -4,7 +4,7 @@
 
 obj=$1
 
-file ${obj} | grep -q ELF || (echo "${obj} is not and ELF file." 1>&2 ; exit 0)
+file ${obj} | grep -q ELF || (echo "${obj} is not an ELF file." 1>&2 ; exit 0)
 
 # Bail out early if there isn't an __ex_table section in this object file.
 objdump -hj __ex_table ${obj} 2> /dev/null > /dev/null
diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl
index 461d4221e4a4..c27d2312cfc3 100755
--- a/scripts/checkpatch.pl
+++ b/scripts/checkpatch.pl
@@ -501,7 +501,7 @@ our $Binary	= qr{(?i)0b[01]+$Int_type?};
 our $Hex	= qr{(?i)0x[0-9a-f]+$Int_type?};
 our $Int	= qr{[0-9]+$Int_type?};
 our $Octal	= qr{0[0-7]+$Int_type?};
-our $String	= qr{"[X\t]*"};
+our $String	= qr{(?:\b[Lu])?"[X\t]*"};
 our $Float_hex	= qr{(?i)0x[0-9a-f]+p-?[0-9]+[fl]?};
 our $Float_dec	= qr{(?i)(?:[0-9]+\.[0-9]*|[0-9]*\.[0-9]+)(?:e-?[0-9]+)?[fl]?};
 our $Float_int	= qr{(?i)[0-9]+e-?[0-9]+[fl]?};
@@ -1181,7 +1181,8 @@ sub git_commit_info {
 #		    git log --format='%H %s' -1 $line |
 #		    echo "commit $(cut -c 1-12,41-)"
 #		done
-	} elsif ($lines[0] =~ /^fatal: ambiguous argument '$commit': unknown revision or path not in the working tree\./) {
+	} elsif ($lines[0] =~ /^fatal: ambiguous argument '$commit': unknown revision or path not in the working tree\./ ||
+		 $lines[0] =~ /^fatal: bad object $commit/) {
 		$id = undef;
 	} else {
 		$id = substr($lines[0], 0, 12);
@@ -2587,6 +2588,8 @@ sub process {
 	my $reported_maintainer_file = 0;
 	my $non_utf8_charset = 0;
 
+	my $last_git_commit_id_linenr = -1;
+
 	my $last_blank_line = 0;
 	my $last_coalesced_string_linenr = -1;
 
@@ -2909,10 +2912,10 @@ sub process {
 					my ($email_name, $email_comment, $email_address, $comment1) = parse_email($ctx);
 					my ($author_name, $author_comment, $author_address, $comment2) = parse_email($author);
 
-					if ($email_address eq $author_address && $email_name eq $author_name) {
+					if (lc $email_address eq lc $author_address && $email_name eq $author_name) {
 						$author_sob = $ctx;
 						$authorsignoff = 2;
-					} elsif ($email_address eq $author_address) {
+					} elsif (lc $email_address eq lc $author_address) {
 						$author_sob = $ctx;
 						$authorsignoff = 3;
 					} elsif ($email_name eq $author_name) {
@@ -3170,10 +3173,20 @@ sub process {
 		}
 
 # Check for git id commit length and improperly formed commit descriptions
-		if ($in_commit_log && !$commit_log_possible_stack_dump &&
+# A correctly formed commit description is:
+#    commit <SHA-1 hash length 12+ chars> ("Complete commit subject")
+# with the commit subject '("' prefix and '")' suffix
+# This is a fairly compilicated block as it tests for what appears to be
+# bare SHA-1 hash with  minimum length of 5.  It also avoids several types of
+# possible SHA-1 matches.
+# A commit match can span multiple lines so this block attempts to find a
+# complete typical commit on a maximum of 3 lines
+		if ($perl_version_ok &&
+		    $in_commit_log && !$commit_log_possible_stack_dump &&
 		    $line !~ /^\s*(?:Link|Patchwork|http|https|BugLink|base-commit):/i &&
 		    $line !~ /^This reverts commit [0-9a-f]{7,40}/ &&
-		    ($line =~ /\bcommit\s+[0-9a-f]{5,}\b/i ||
+		    (($line =~ /\bcommit\s+[0-9a-f]{5,}\b/i ||
+		      ($line =~ /\bcommit\s*$/i && defined($rawlines[$linenr]) && $rawlines[$linenr] =~ /^\s*[0-9a-f]{5,}\b/i)) ||
 		     ($line =~ /(?:\s|^)[0-9a-f]{12,40}(?:[\s"'\(\[]|$)/i &&
 		      $line !~ /[\<\[][0-9a-f]{12,40}[\>\]]/i &&
 		      $line !~ /\bfixes:\s*[0-9a-f]{12,40}/i))) {
@@ -3183,49 +3196,56 @@ sub process {
 			my $long = 0;
 			my $case = 1;
 			my $space = 1;
-			my $hasdesc = 0;
-			my $hasparens = 0;
 			my $id = '0123456789ab';
 			my $orig_desc = "commit description";
 			my $description = "";
+			my $herectx = $herecurr;
+			my $has_parens = 0;
+			my $has_quotes = 0;
+
+			my $input = $line;
+			if ($line =~ /(?:\bcommit\s+[0-9a-f]{5,}|\bcommit\s*$)/i) {
+				for (my $n = 0; $n < 2; $n++) {
+					if ($input =~ /\bcommit\s+[0-9a-f]{5,}\s*($balanced_parens)/i) {
+						$orig_desc = $1;
+						$has_parens = 1;
+						# Always strip leading/trailing parens then double quotes if existing
+						$orig_desc = substr($orig_desc, 1, -1);
+						if ($orig_desc =~ /^".*"$/) {
+							$orig_desc = substr($orig_desc, 1, -1);
+							$has_quotes = 1;
+						}
+						last;
+					}
+					last if ($#lines < $linenr + $n);
+					$input .= " " . trim($rawlines[$linenr + $n]);
+					$herectx .= "$rawlines[$linenr + $n]\n";
+				}
+				$herectx = $herecurr if (!$has_parens);
+			}
 
-			if ($line =~ /\b(c)ommit\s+([0-9a-f]{5,})\b/i) {
+			if ($input =~ /\b(c)ommit\s+([0-9a-f]{5,})\b/i) {
 				$init_char = $1;
 				$orig_commit = lc($2);
-			} elsif ($line =~ /\b([0-9a-f]{12,40})\b/i) {
+				$short = 0 if ($input =~ /\bcommit\s+[0-9a-f]{12,40}/i);
+				$long = 1 if ($input =~ /\bcommit\s+[0-9a-f]{41,}/i);
+				$space = 0 if ($input =~ /\bcommit [0-9a-f]/i);
+				$case = 0 if ($input =~ /\b[Cc]ommit\s+[0-9a-f]{5,40}[^A-F]/);
+			} elsif ($input =~ /\b([0-9a-f]{12,40})\b/i) {
 				$orig_commit = lc($1);
 			}
 
-			$short = 0 if ($line =~ /\bcommit\s+[0-9a-f]{12,40}/i);
-			$long = 1 if ($line =~ /\bcommit\s+[0-9a-f]{41,}/i);
-			$space = 0 if ($line =~ /\bcommit [0-9a-f]/i);
-			$case = 0 if ($line =~ /\b[Cc]ommit\s+[0-9a-f]{5,40}[^A-F]/);
-			if ($line =~ /\bcommit\s+[0-9a-f]{5,}\s+\("([^"]+)"\)/i) {
-				$orig_desc = $1;
-				$hasparens = 1;
-			} elsif ($line =~ /\bcommit\s+[0-9a-f]{5,}\s*$/i &&
-				 defined $rawlines[$linenr] &&
-				 $rawlines[$linenr] =~ /^\s*\("([^"]+)"\)/) {
-				$orig_desc = $1;
-				$hasparens = 1;
-			} elsif ($line =~ /\bcommit\s+[0-9a-f]{5,}\s+\("[^"]+$/i &&
-				 defined $rawlines[$linenr] &&
-				 $rawlines[$linenr] =~ /^\s*[^"]+"\)/) {
-				$line =~ /\bcommit\s+[0-9a-f]{5,}\s+\("([^"]+)$/i;
-				$orig_desc = $1;
-				$rawlines[$linenr] =~ /^\s*([^"]+)"\)/;
-				$orig_desc .= " " . $1;
-				$hasparens = 1;
-			}
-
 			($id, $description) = git_commit_info($orig_commit,
 							      $id, $orig_desc);
 
 			if (defined($id) &&
-			   ($short || $long || $space || $case || ($orig_desc ne $description) || !$hasparens)) {
+			    ($short || $long || $space || $case || ($orig_desc ne $description) || !$has_quotes) &&
+			    $last_git_commit_id_linenr != $linenr - 1) {
 				ERROR("GIT_COMMIT_ID",
-				      "Please use git commit description style 'commit <12+ chars of sha1> (\"<title line>\")' - ie: '${init_char}ommit $id (\"$description\")'\n" . $herecurr);
+				      "Please use git commit description style 'commit <12+ chars of sha1> (\"<title line>\")' - ie: '${init_char}ommit $id (\"$description\")'\n" . $herectx);
 			}
+			#don't report the next line if this line ends in commit and the sha1 hash is the next line
+			$last_git_commit_id_linenr = $linenr if ($line =~ /\bcommit\s*$/i);
 		}
 
 # Check for added, moved or deleted files
@@ -6132,7 +6152,8 @@ sub process {
 		}
 
 # concatenated string without spaces between elements
-		if ($line =~ /$String[A-Za-z0-9_]/ || $line =~ /[A-Za-z0-9_]$String/) {
+		if ($line =~ /$String[A-Z_]/ ||
+		    ($line =~ /([A-Za-z0-9_]+)$String/ && $1 !~ /^[Lu]$/)) {
 			if (CHK("CONCATENATED_STRING",
 				"Concatenated strings should use spaces between elements\n" . $herecurr) &&
 			    $fix) {
@@ -6145,7 +6166,7 @@ sub process {
 		}
 
 # uncoalesced string fragments
-		if ($line =~ /$String\s*"/) {
+		if ($line =~ /$String\s*[Lu]?"/) {
 			if (WARN("STRING_FRAGMENTS",
 				 "Consecutive strings are generally better as a single string\n" . $herecurr) &&
 			    $fix) {
diff --git a/scripts/checksyscalls.sh b/scripts/checksyscalls.sh
index b7609958ee36..fd9777f63f14 100755
--- a/scripts/checksyscalls.sh
+++ b/scripts/checksyscalls.sh
@@ -266,4 +266,4 @@ syscall_list() {
 }
 
 (ignore_list && syscall_list $(dirname $0)/../arch/x86/entry/syscalls/syscall_32.tbl) | \
-$* -E -x c - > /dev/null
+$* -Wno-error -E -x c - > /dev/null
diff --git a/scripts/coccinelle/api/kvmalloc.cocci b/scripts/coccinelle/api/kvmalloc.cocci
index c30dab718a49..5ddcb76b76b0 100644
--- a/scripts/coccinelle/api/kvmalloc.cocci
+++ b/scripts/coccinelle/api/kvmalloc.cocci
@@ -79,7 +79,7 @@ position p : script:python() { relevant(p) };
   } else {
     ... when != krealloc(E, ...)
         when any
-*   \(kfree\|kzfree\)(E)
+*   \(kfree\|kfree_sensitive\)(E)
     ...
   }
 
diff --git a/scripts/coccinelle/iterators/use_after_iter.cocci b/scripts/coccinelle/iterators/use_after_iter.cocci
index 9be48b520879..676edd562eef 100644
--- a/scripts/coccinelle/iterators/use_after_iter.cocci
+++ b/scripts/coccinelle/iterators/use_after_iter.cocci
@@ -123,6 +123,8 @@ hlist_for_each_entry_safe(c,...) S
 |
 list_remove_head(x,c,...)
 |
+list_entry_is_head(c,...)
+|
 sizeof(<+...c...+>)
 |
  &c->member
diff --git a/scripts/module.lds.S b/scripts/module.lds.S
index 04c5685c25cf..1d0e1e4dc3d2 100644
--- a/scripts/module.lds.S
+++ b/scripts/module.lds.S
@@ -24,6 +24,7 @@ SECTIONS {
 	__kcrctab		0 : { *(SORT(___kcrctab+*)) }
 	__kcrctab_gpl		0 : { *(SORT(___kcrctab_gpl+*)) }
 
+	.ctors			0 : ALIGN(8) { *(SORT(.ctors.*)) *(.ctors) }
 	.init_array		0 : ALIGN(8) { *(SORT(.init_array.*)) *(.init_array) }
 
 	__jump_table		0 : ALIGN(8) { KEEP(*(__jump_table)) }
diff --git a/sound/isa/gus/gus_main.c b/sound/isa/gus/gus_main.c
index ae1e2542ee4a..3b46490271fe 100644
--- a/sound/isa/gus/gus_main.c
+++ b/sound/isa/gus/gus_main.c
@@ -87,10 +87,24 @@ static void snd_gus_init_control(struct snd_gus_card *gus)
 
 static int snd_gus_free(struct snd_gus_card *gus)
 {
-	if (gus->gf1.res_port2) {
-		snd_gf1_stop(gus);
-		snd_gus_init_dma_irq(gus, 0);
+	if (gus->gf1.res_port2 == NULL)
+		goto __hw_end;
+	snd_gf1_stop(gus);
+	snd_gus_init_dma_irq(gus, 0);
+      __hw_end:
+	release_and_free_resource(gus->gf1.res_port1);
+	release_and_free_resource(gus->gf1.res_port2);
+	if (gus->gf1.irq >= 0)
+		free_irq(gus->gf1.irq, (void *) gus);
+	if (gus->gf1.dma1 >= 0) {
+		disable_dma(gus->gf1.dma1);
+		free_dma(gus->gf1.dma1);
 	}
+	if (!gus->equal_dma && gus->gf1.dma2 >= 0) {
+		disable_dma(gus->gf1.dma2);
+		free_dma(gus->gf1.dma2);
+	}
+	kfree(gus);
 	return 0;
 }
 
@@ -116,7 +130,7 @@ int snd_gus_create(struct snd_card *card,
 	};
 
 	*rgus = NULL;
-	gus = devm_kzalloc(card->dev, sizeof(*gus), GFP_KERNEL);
+	gus = kzalloc(sizeof(*gus), GFP_KERNEL);
 	if (gus == NULL)
 		return -ENOMEM;
 	spin_lock_init(&gus->reg_lock);
@@ -142,33 +156,35 @@ int snd_gus_create(struct snd_card *card,
 	gus->gf1.reg_timerctrl = GUSP(gus, TIMERCNTRL);
 	gus->gf1.reg_timerdata = GUSP(gus, TIMERDATA);
 	/* allocate resources */
-	gus->gf1.res_port1 = devm_request_region(card->dev, port, 16,
-						 "GUS GF1 (Adlib/SB)");
+	gus->gf1.res_port1 = request_region(port, 16, "GUS GF1 (Adlib/SB)");
 	if (!gus->gf1.res_port1) {
 		snd_printk(KERN_ERR "gus: can't grab SB port 0x%lx\n", port);
+		snd_gus_free(gus);
 		return -EBUSY;
 	}
-	gus->gf1.res_port2 = devm_request_region(card->dev, port + 0x100, 12,
-						 "GUS GF1 (Synth)");
+	gus->gf1.res_port2 = request_region(port + 0x100, 12, "GUS GF1 (Synth)");
 	if (!gus->gf1.res_port2) {
 		snd_printk(KERN_ERR "gus: can't grab synth port 0x%lx\n", port + 0x100);
+		snd_gus_free(gus);
 		return -EBUSY;
 	}
-	if (irq >= 0 && devm_request_irq(card->dev, irq, snd_gus_interrupt, 0,
-					 "GUS GF1", (void *) gus)) {
+	if (irq >= 0 && request_irq(irq, snd_gus_interrupt, 0, "GUS GF1", (void *) gus)) {
 		snd_printk(KERN_ERR "gus: can't grab irq %d\n", irq);
+		snd_gus_free(gus);
 		return -EBUSY;
 	}
 	gus->gf1.irq = irq;
 	card->sync_irq = irq;
-	if (snd_devm_request_dma(card->dev, dma1, "GUS - 1")) {
+	if (request_dma(dma1, "GUS - 1")) {
 		snd_printk(KERN_ERR "gus: can't grab DMA1 %d\n", dma1);
+		snd_gus_free(gus);
 		return -EBUSY;
 	}
 	gus->gf1.dma1 = dma1;
 	if (dma2 >= 0 && dma1 != dma2) {
-		if (snd_devm_request_dma(card->dev, dma2, "GUS - 2")) {
+		if (request_dma(dma2, "GUS - 2")) {
 			snd_printk(KERN_ERR "gus: can't grab DMA2 %d\n", dma2);
+			snd_gus_free(gus);
 			return -EBUSY;
 		}
 		gus->gf1.dma2 = dma2;
@@ -193,8 +209,10 @@ int snd_gus_create(struct snd_card *card,
 	gus->gf1.volume_ramp = 25;
 	gus->gf1.smooth_pan = 1;
 	err = snd_device_new(card, SNDRV_DEV_LOWLEVEL, gus, &ops);
-	if (err < 0)
+	if (err < 0) {
+		snd_gus_free(gus);
 		return err;
+	}
 	*rgus = gus;
 	return 0;
 }
diff --git a/sound/isa/gus/interwave.c b/sound/isa/gus/interwave.c
index 20f490e9d563..a04a9d3253f8 100644
--- a/sound/isa/gus/interwave.c
+++ b/sound/isa/gus/interwave.c
@@ -618,12 +618,19 @@ static int snd_interwave_card_new(struct device *pdev, int dev,
 	return 0;
 }
 
-static int snd_interwave_probe(struct snd_card *card, int dev)
+static int snd_interwave_probe_gus(struct snd_card *card, int dev,
+				   struct snd_gus_card **gusp)
+{
+	return snd_gus_create(card, port[dev], -irq[dev], dma1[dev], dma2[dev],
+			      0, 32, pcm_channels[dev], effect[dev], gusp);
+}
+
+static int snd_interwave_probe(struct snd_card *card, int dev,
+			       struct snd_gus_card *gus)
 {
 	int xirq, xdma1, xdma2;
 	struct snd_interwave *iwcard = card->private_data;
 	struct snd_wss *wss;
-	struct snd_gus_card *gus;
 #ifdef SNDRV_STB
 	struct snd_i2c_bus *i2c_bus;
 #endif
@@ -634,14 +641,6 @@ static int snd_interwave_probe(struct snd_card *card, int dev)
 	xdma1 = dma1[dev];
 	xdma2 = dma2[dev];
 
-	err = snd_gus_create(card,
-			     port[dev],
-			     -xirq, xdma1, xdma2,
-			     0, 32,
-			     pcm_channels[dev], effect[dev], &gus);
-	if (err < 0)
-		return err;
-
 	err = snd_interwave_detect(iwcard, gus, dev
 #ifdef SNDRV_STB
 				   , &i2c_bus
@@ -757,22 +756,6 @@ static int snd_interwave_probe(struct snd_card *card, int dev)
 	return 0;
 }
 
-static int snd_interwave_isa_probe1(int dev, struct device *devptr)
-{
-	struct snd_card *card;
-	int err;
-
-	err = snd_interwave_card_new(devptr, dev, &card);
-	if (err < 0)
-		return err;
-
-	err = snd_interwave_probe(card, dev);
-	if (err < 0)
-		return err;
-	dev_set_drvdata(devptr, card);
-	return 0;
-}
-
 static int snd_interwave_isa_match(struct device *pdev,
 				   unsigned int dev)
 {
@@ -788,6 +771,8 @@ static int snd_interwave_isa_match(struct device *pdev,
 static int snd_interwave_isa_probe(struct device *pdev,
 				   unsigned int dev)
 {
+	struct snd_card *card;
+	struct snd_gus_card *gus;
 	int err;
 	static const int possible_irqs[] = {5, 11, 12, 9, 7, 15, 3, -1};
 	static const int possible_dmas[] = {0, 1, 3, 5, 6, 7, -1};
@@ -814,19 +799,31 @@ static int snd_interwave_isa_probe(struct device *pdev,
 		}
 	}
 
+	err = snd_interwave_card_new(pdev, dev, &card);
+	if (err < 0)
+		return err;
+
 	if (port[dev] != SNDRV_AUTO_PORT)
-		return snd_interwave_isa_probe1(dev, pdev);
+		err = snd_interwave_probe_gus(card, dev, &gus);
 	else {
 		static const long possible_ports[] = {0x210, 0x220, 0x230, 0x240, 0x250, 0x260};
 		int i;
 		for (i = 0; i < ARRAY_SIZE(possible_ports); i++) {
 			port[dev] = possible_ports[i];
-			err = snd_interwave_isa_probe1(dev, pdev);
+			err = snd_interwave_probe_gus(card, dev, &gus);
 			if (! err)
 				return 0;
 		}
-		return err;
 	}
+	if (err < 0)
+		return err;
+
+	err = snd_interwave_probe(card, dev, gus);
+	if (err < 0)
+		return err;
+
+	dev_set_drvdata(pdev, card);
+	return 0;
 }
 
 static struct isa_driver snd_interwave_driver = {
@@ -844,6 +841,7 @@ static int snd_interwave_pnp_detect(struct pnp_card_link *pcard,
 {
 	static int dev;
 	struct snd_card *card;
+	struct snd_gus_card *gus;
 	int res;
 
 	for ( ; dev < SNDRV_CARDS; dev++) {
@@ -860,7 +858,10 @@ static int snd_interwave_pnp_detect(struct pnp_card_link *pcard,
 	res = snd_interwave_pnp(dev, card->private_data, pcard, pid);
 	if (res < 0)
 		return res;
-	res = snd_interwave_probe(card, dev);
+	res = snd_interwave_probe_gus(card, dev, &gus);
+	if (res < 0)
+		return res;
+	res = snd_interwave_probe(card, dev, gus);
 	if (res < 0)
 		return res;
 	pnp_set_card_drvdata(pcard, card);
diff --git a/sound/pci/vx222/vx222.c b/sound/pci/vx222/vx222.c
index f48cc20b9e8a..468a6a20dc1e 100644
--- a/sound/pci/vx222/vx222.c
+++ b/sound/pci/vx222/vx222.c
@@ -137,6 +137,7 @@ static int snd_vx222_create(struct snd_card *card, struct pci_dev *pci,
 	}
 	chip->irq = pci->irq;
 	card->sync_irq = chip->irq;
+	*rchip = vx;
 
 	return 0;
 }
diff --git a/sound/soc/codecs/rt5682.c b/sound/soc/codecs/rt5682.c
index e822fa1b9d4b..4a64cab99c55 100644
--- a/sound/soc/codecs/rt5682.c
+++ b/sound/soc/codecs/rt5682.c
@@ -2942,9 +2942,6 @@ static int rt5682_suspend(struct snd_soc_component *component)
 			break;
 		}
 
-		snd_soc_component_update_bits(component, RT5682_PWR_ANLG_3,
-			RT5682_PWR_CBJ, 0);
-
 		/* enter SAR ADC power saving mode */
 		snd_soc_component_update_bits(component, RT5682_SAR_IL_CMD_1,
 			RT5682_SAR_BUTT_DET_MASK | RT5682_SAR_BUTDET_MODE_MASK |
diff --git a/sound/soc/generic/audio-graph-card.c b/sound/soc/generic/audio-graph-card.c
index 5e71382467e8..546f6fd0609e 100644
--- a/sound/soc/generic/audio-graph-card.c
+++ b/sound/soc/generic/audio-graph-card.c
@@ -285,6 +285,7 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv,
 	if (li->cpu) {
 		struct snd_soc_card *card = simple_priv_to_card(priv);
 		struct snd_soc_dai_link_component *cpus = asoc_link_to_cpu(dai_link, 0);
+		struct snd_soc_dai_link_component *platforms = asoc_link_to_platform(dai_link, 0);
 		int is_single_links = 0;
 
 		/* Codec is dummy */
@@ -313,6 +314,7 @@ static int graph_dai_link_of_dpcm(struct asoc_simple_priv *priv,
 			dai_link->no_pcm = 1;
 
 		asoc_simple_canonicalize_cpu(cpus, is_single_links);
+		asoc_simple_canonicalize_platform(platforms, cpus);
 	} else {
 		struct snd_soc_codec_conf *cconf = simple_props_to_codec_conf(dai_props, 0);
 		struct snd_soc_dai_link_component *codecs = asoc_link_to_codec(dai_link, 0);
@@ -366,6 +368,7 @@ static int graph_dai_link_of(struct asoc_simple_priv *priv,
 	struct snd_soc_dai_link *dai_link = simple_priv_to_link(priv, li->link);
 	struct snd_soc_dai_link_component *cpus = asoc_link_to_cpu(dai_link, 0);
 	struct snd_soc_dai_link_component *codecs = asoc_link_to_codec(dai_link, 0);
+	struct snd_soc_dai_link_component *platforms = asoc_link_to_platform(dai_link, 0);
 	char dai_name[64];
 	int ret, is_single_links = 0;
 
@@ -383,6 +386,7 @@ static int graph_dai_link_of(struct asoc_simple_priv *priv,
 		 "%s-%s", cpus->dai_name, codecs->dai_name);
 
 	asoc_simple_canonicalize_cpu(cpus, is_single_links);
+	asoc_simple_canonicalize_platform(platforms, cpus);
 
 	ret = graph_link_init(priv, cpu_ep, codec_ep, li, dai_name);
 	if (ret < 0)
@@ -608,6 +612,7 @@ static int graph_count_noml(struct asoc_simple_priv *priv,
 
 	li->num[li->link].cpus		= 1;
 	li->num[li->link].codecs	= 1;
+	li->num[li->link].platforms     = 1;
 
 	li->link += 1; /* 1xCPU-Codec */
 
@@ -630,6 +635,7 @@ static int graph_count_dpcm(struct asoc_simple_priv *priv,
 
 	if (li->cpu) {
 		li->num[li->link].cpus		= 1;
+		li->num[li->link].platforms     = 1;
 
 		li->link++; /* 1xCPU-dummy */
 	} else {
diff --git a/sound/soc/intel/boards/Kconfig b/sound/soc/intel/boards/Kconfig
index 046955bf717c..61b71d6c44cf 100644
--- a/sound/soc/intel/boards/Kconfig
+++ b/sound/soc/intel/boards/Kconfig
@@ -602,7 +602,7 @@ config SND_SOC_INTEL_SOUNDWIRE_SOF_MACH
 	select SND_SOC_DMIC
 	select SND_SOC_INTEL_HDA_DSP_COMMON
 	select SND_SOC_INTEL_SOF_MAXIM_COMMON
-	select SND_SOC_SDW_MOCKUP
+	imply SND_SOC_SDW_MOCKUP
 	help
 	  Add support for Intel SoundWire-based platforms connected to
 	  MAX98373, RT700, RT711, RT1308 and RT715
diff --git a/sound/soc/mediatek/Kconfig b/sound/soc/mediatek/Kconfig
index cf567a89f421..5a2f4667d50b 100644
--- a/sound/soc/mediatek/Kconfig
+++ b/sound/soc/mediatek/Kconfig
@@ -187,6 +187,7 @@ config SND_SOC_MT8192_MT6359_RT1015_RT5682
 
 config SND_SOC_MT8195
 	tristate "ASoC support for Mediatek MT8195 chip"
+	depends on ARCH_MEDIATEK || COMPILE_TEST
 	select SND_SOC_MEDIATEK
 	help
 	  This adds ASoC platform driver support for Mediatek MT8195 chip
@@ -197,7 +198,7 @@ config SND_SOC_MT8195
 config SND_SOC_MT8195_MT6359_RT1019_RT5682
 	tristate "ASoC Audio driver for MT8195 with MT6359 RT1019 RT5682 codec"
 	depends on I2C
-	depends on SND_SOC_MT8195
+	depends on SND_SOC_MT8195 && MTK_PMIC_WRAP
 	select SND_SOC_MT6359
 	select SND_SOC_RT1015P
 	select SND_SOC_RT5682_I2C
diff --git a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
index 5dc217f59bd6..c97ace7387b4 100644
--- a/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
+++ b/sound/soc/mediatek/mt8195/mt8195-mt6359-rt1019-rt5682.c
@@ -1018,13 +1018,12 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev)
 				of_parse_phandle(pdev->dev.of_node,
 						 "mediatek,dptx-codec", 0);
 			if (!dai_link->codecs->of_node) {
-				dev_err(&pdev->dev, "Property 'dptx-codec' missing or invalid\n");
-				return -EINVAL;
+				dev_dbg(&pdev->dev, "No property 'dptx-codec'\n");
+			} else {
+				dai_link->codecs->name = NULL;
+				dai_link->codecs->dai_name = "i2s-hifi";
+				dai_link->init = mt8195_dptx_codec_init;
 			}
-
-			dai_link->codecs->name = NULL;
-			dai_link->codecs->dai_name = "i2s-hifi";
-			dai_link->init = mt8195_dptx_codec_init;
 		}
 
 		if (strcmp(dai_link->name, "ETDM3_OUT_BE") == 0) {
@@ -1032,13 +1031,12 @@ static int mt8195_mt6359_rt1019_rt5682_dev_probe(struct platform_device *pdev)
 				of_parse_phandle(pdev->dev.of_node,
 						 "mediatek,hdmi-codec", 0);
 			if (!dai_link->codecs->of_node) {
-				dev_err(&pdev->dev, "Property 'hdmi-codec' missing or invalid\n");
-				return -EINVAL;
+				dev_dbg(&pdev->dev, "No property 'hdmi-codec'\n");
+			} else {
+				dai_link->codecs->name = NULL;
+				dai_link->codecs->dai_name = "i2s-hifi";
+				dai_link->init = mt8195_hdmi_codec_init;
 			}
-
-			dai_link->codecs->name = NULL;
-			dai_link->codecs->dai_name = "i2s-hifi";
-			dai_link->init = mt8195_hdmi_codec_init;
 		}
 	}
 
diff --git a/sound/soc/rockchip/rockchip_i2s.c b/sound/soc/rockchip/rockchip_i2s.c
index 53e0b4a1c7d2..7e89f5b0c237 100644
--- a/sound/soc/rockchip/rockchip_i2s.c
+++ b/sound/soc/rockchip/rockchip_i2s.c
@@ -15,6 +15,7 @@
 #include <linux/clk.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
+#include <linux/spinlock.h>
 #include <sound/pcm_params.h>
 #include <sound/dmaengine_pcm.h>
 
@@ -53,6 +54,7 @@ struct rk_i2s_dev {
 	bool is_master_mode;
 	const struct rk_i2s_pins *pins;
 	unsigned int bclk_ratio;
+	spinlock_t lock; /* tx/rx lock */
 };
 
 static int i2s_runtime_suspend(struct device *dev)
@@ -96,6 +98,7 @@ static void rockchip_snd_txctrl(struct rk_i2s_dev *i2s, int on)
 	unsigned int val = 0;
 	int retry = 10;
 
+	spin_lock(&i2s->lock);
 	if (on) {
 		regmap_update_bits(i2s->regmap, I2S_DMACR,
 				   I2S_DMACR_TDE_ENABLE, I2S_DMACR_TDE_ENABLE);
@@ -136,6 +139,7 @@ static void rockchip_snd_txctrl(struct rk_i2s_dev *i2s, int on)
 			}
 		}
 	}
+	spin_unlock(&i2s->lock);
 }
 
 static void rockchip_snd_rxctrl(struct rk_i2s_dev *i2s, int on)
@@ -143,6 +147,7 @@ static void rockchip_snd_rxctrl(struct rk_i2s_dev *i2s, int on)
 	unsigned int val = 0;
 	int retry = 10;
 
+	spin_lock(&i2s->lock);
 	if (on) {
 		regmap_update_bits(i2s->regmap, I2S_DMACR,
 				   I2S_DMACR_RDE_ENABLE, I2S_DMACR_RDE_ENABLE);
@@ -183,6 +188,7 @@ static void rockchip_snd_rxctrl(struct rk_i2s_dev *i2s, int on)
 			}
 		}
 	}
+	spin_unlock(&i2s->lock);
 }
 
 static int rockchip_i2s_set_fmt(struct snd_soc_dai *cpu_dai,
@@ -684,6 +690,7 @@ static int rockchip_i2s_probe(struct platform_device *pdev)
 	if (!i2s)
 		return -ENOMEM;
 
+	spin_lock_init(&i2s->lock);
 	i2s->dev = &pdev->dev;
 
 	i2s->grf = syscon_regmap_lookup_by_phandle(node, "rockchip,grf");
diff --git a/sound/soc/samsung/s3c24xx_simtec.c b/sound/soc/samsung/s3c24xx_simtec.c
index 81a29d12c57d..0cc66774b85d 100644
--- a/sound/soc/samsung/s3c24xx_simtec.c
+++ b/sound/soc/samsung/s3c24xx_simtec.c
@@ -327,7 +327,7 @@ int simtec_audio_core_probe(struct platform_device *pdev,
 
 	snd_dev = platform_device_alloc("soc-audio", -1);
 	if (!snd_dev) {
-		dev_err(&pdev->dev, "failed to alloc soc-audio devicec\n");
+		dev_err(&pdev->dev, "failed to alloc soc-audio device\n");
 		ret = -ENOMEM;
 		goto err_gpio;
 	}
diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c
index 4479a590194f..6ee6d24c847f 100644
--- a/sound/usb/quirks.c
+++ b/sound/usb/quirks.c
@@ -1743,6 +1743,7 @@ static const struct registration_quirk registration_quirks[] = {
 	REG_QUIRK_ENTRY(0x0951, 0x16ed, 2),	/* Kingston HyperX Cloud Alpha S */
 	REG_QUIRK_ENTRY(0x0951, 0x16ea, 2),	/* Kingston HyperX Cloud Flight S */
 	REG_QUIRK_ENTRY(0x0ecb, 0x1f46, 2),	/* JBL Quantum 600 */
+	REG_QUIRK_ENTRY(0x0ecb, 0x1f47, 2),	/* JBL Quantum 800 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x2039, 2),	/* JBL Quantum 400 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x203c, 2),	/* JBL Quantum 600 */
 	REG_QUIRK_ENTRY(0x0ecb, 0x203e, 2),	/* JBL Quantum 800 */
diff --git a/tools/bootconfig/main.c b/tools/bootconfig/main.c
index f45fa992e01d..fd67496a947f 100644
--- a/tools/bootconfig/main.c
+++ b/tools/bootconfig/main.c
@@ -111,9 +111,11 @@ static void xbc_show_list(void)
 	char key[XBC_KEYLEN_MAX];
 	struct xbc_node *leaf;
 	const char *val;
+	int ret;
 
 	xbc_for_each_key_value(leaf, val) {
-		if (xbc_node_compose_key(leaf, key, XBC_KEYLEN_MAX) < 0) {
+		ret = xbc_node_compose_key(leaf, key, XBC_KEYLEN_MAX);
+		if (ret < 0) {
 			fprintf(stderr, "Failed to compose key %d\n", ret);
 			break;
 		}
diff --git a/tools/bootconfig/scripts/bconf2ftrace.sh b/tools/bootconfig/scripts/bconf2ftrace.sh
index feb30c2c7881..850c2073433e 100755
--- a/tools/bootconfig/scripts/bconf2ftrace.sh
+++ b/tools/bootconfig/scripts/bconf2ftrace.sh
@@ -94,6 +94,92 @@ compose_synth() { # event_name branch
 	xbc_get_val $2 | while read field; do echo -n "$field; "; done
 }
 
+print_hist_array() { # prefix key
+	__sep="="
+	if xbc_has_key ${1}.${2}; then
+		echo -n ":$2"
+		xbc_get_val ${1}.${2} | while read field; do
+			echo -n "$__sep$field"; __sep=","
+		done
+	fi
+}
+
+print_hist_action_array() { # prefix key
+	__sep="("
+	echo -n ".$2"
+	xbc_get_val ${1}.${2} | while read field; do
+		echo -n "$__sep$field"; __sep=","
+	done
+	echo -n ")"
+}
+
+print_hist_one_action() { # prefix handler param
+	echo -n ":${2}("`xbc_get_val ${1}.${3}`")"
+	if xbc_has_key "${1}.trace"; then
+		print_hist_action_array ${1} "trace"
+	elif xbc_has_key "${1}.save"; then
+		print_hist_action_array ${1} "save"
+	elif xbc_has_key "${1}.snapshot"; then
+		echo -n ".snapshot()"
+	fi
+}
+
+print_hist_actions() { # prefix handler param
+	for __hdr in `xbc_subkeys ${1}.${2} 1 ".[0-9]"`; do
+		print_hist_one_action ${1}.${2}.$__hdr ${2} ${3}
+	done
+	if xbc_has_key ${1}.${2}.${3} ; then
+		print_hist_one_action ${1}.${2} ${2} ${3}
+	fi
+}
+
+print_hist_var() { # prefix varname
+	echo -n ":${2}="`xbc_get_val ${1}.var.${2} | tr -d [:space:]`
+}
+
+print_one_histogram() { # prefix
+	echo -n "hist"
+	print_hist_array $1 "keys"
+	print_hist_array $1 "values"
+	print_hist_array $1 "sort"
+	if xbc_has_key "${1}.size"; then
+		echo -n ":size="`xbc_get_val ${1}.size`
+	fi
+	if xbc_has_key "${1}.name"; then
+		echo -n ":name="`xbc_get_val ${1}.name`
+	fi
+	for __var in `xbc_subkeys "${1}.var" 1`; do
+		print_hist_var ${1} ${__var}
+	done
+	if xbc_has_key "${1}.pause"; then
+		echo -n ":pause"
+	elif xbc_has_key "${1}.continue"; then
+		echo -n ":continue"
+	elif xbc_has_key "${1}.clear"; then
+		echo -n ":clear"
+	fi
+	print_hist_actions ${1} "onmax" "var"
+	print_hist_actions ${1} "onchange" "var"
+	print_hist_actions ${1} "onmatch" "event"
+
+	if xbc_has_key "${1}.filter"; then
+		echo -n " if "`xbc_get_val ${1}.filter`
+	fi
+}
+
+setup_one_histogram() { # prefix trigger-file
+	run_cmd "echo '`print_one_histogram ${1}`' >> ${2}"
+}
+
+setup_histograms() { # prefix trigger-file
+	for __hist in `xbc_subkeys ${1} 1 ".[0-9]"`; do
+		setup_one_histogram ${1}.$__hist ${2}
+	done
+	if xbc_has_key ${1}.keys; then
+		setup_one_histogram ${1} ${2}
+	fi
+}
+
 setup_event() { # prefix group event [instance]
 	branch=$1.$2.$3
 	if [ "$4" ]; then
@@ -101,6 +187,12 @@ setup_event() { # prefix group event [instance]
 	else
 		eventdir="$TRACEFS/events/$2/$3"
 	fi
+	# group enable
+	if [ "$3" = "enable" ]; then
+		run_cmd "echo 1 > ${eventdir}"
+		return
+	fi
+
 	case $2 in
 	kprobes)
 		xbc_get_val ${branch}.probes | while read line; do
@@ -115,6 +207,8 @@ setup_event() { # prefix group event [instance]
 	set_value_of ${branch}.filter ${eventdir}/filter
 	set_array_of ${branch}.actions ${eventdir}/trigger
 
+	setup_histograms ${branch}.hist ${eventdir}/trigger
+
 	if xbc_has_key ${branch}.enable; then
 		run_cmd "echo 1 > ${eventdir}/enable"
 	fi
@@ -127,6 +221,13 @@ setup_events() { # prefix("ftrace" or "ftrace.instance.INSTANCE") [instance]
 			setup_event $prefix ${grpev%.*} ${grpev#*.} $2
 		done
 	fi
+	if xbc_has_branch ${1}.event.enable; then
+		if [ "$2" ]; then
+			run_cmd "echo 1 > $TRACEFS/instances/$2/events/enable"
+		else
+			run_cmd "echo 1 > $TRACEFS/events/enable"
+		fi
+	fi
 }
 
 size2kb() { # size[KB|MB]
diff --git a/tools/bootconfig/scripts/ftrace2bconf.sh b/tools/bootconfig/scripts/ftrace2bconf.sh
index a0c3bcc6da4f..6183b36c6846 100755
--- a/tools/bootconfig/scripts/ftrace2bconf.sh
+++ b/tools/bootconfig/scripts/ftrace2bconf.sh
@@ -92,6 +92,10 @@ referred_vars() {
 	grep "^hist" $1/trigger | grep -o '$[a-zA-Z0-9]*'
 }
 
+event_is_enabled() { # enable-file
+	test -f $1 & grep -q "1" $1
+}
+
 per_event_options() { # event-dir
 	evdir=$1
 	# Check the special event which has no filter and no trigger
@@ -113,7 +117,9 @@ per_event_options() { # event-dir
 		emit_kv $PREFIX.event.$group.$event.actions += \'$action\'
 	done
 
-	# enable is not checked; this is done by set_event in the instance.
+	if [ $GROUP_ENABLED -eq 0 ] && event_is_enabled $evdir/enable; then
+		emit_kv $PREFIX.event.$group.$event.enable
+	fi
 	val=`cat $evdir/filter`
 	if [ "$val" != "none" ]; then
 		emit_kv $PREFIX.event.$group.$event.filter = "$val"
@@ -137,8 +143,19 @@ event_options() {
 		kprobe_event_options
 		synth_event_options
 	fi
+	ALL_ENABLED=0
+	if event_is_enabled $INSTANCE/events/enable; then
+		emit_kv $PREFIX.event.enable
+		ALL_ENABLED=1
+	fi
 	for group in `ls $INSTANCE/events/` ; do
 		[ ! -d $INSTANCE/events/$group ] && continue
+		GROUP_ENABLED=$ALL_ENABLED
+		if [ $ALL_ENABLED -eq 0 ] && \
+		   event_is_enabled $INSTANCE/events/$group/enable ;then
+			emit_kv $PREFIX.event.$group.enable
+			GROUP_ENABLED=1
+		fi
 		for event in `ls $INSTANCE/events/$group/` ;do
 			[ ! -d $INSTANCE/events/$group/$event ] && continue
 			per_event_options $INSTANCE/events/$group/$event
@@ -222,15 +239,10 @@ instance_options() { # [instance-name]
 		emit_kv $PREFIX.cpumask = $val
 	fi
 	val=`cat $INSTANCE/tracing_on`
-	if [ `echo $val | sed -e s/f//g`x != x ]; then
-		emit_kv $PREFIX.tracing_on = $val
+	if [ "$val" = "0" ]; then
+		emit_kv $PREFIX.tracing_on = 0
 	fi
 
-	val=
-	for i in `cat $INSTANCE/set_event`; do
-		val="$val, $i"
-	done
-	[ "$val" ] && emit_kv $PREFIX.events = "${val#,}"
 	val=`cat $INSTANCE/current_tracer`
 	[ $val != nop ] && emit_kv $PREFIX.tracer = $val
 	if grep -qv "^#" $INSTANCE/set_ftrace_filter $INSTANCE/set_ftrace_notrace; then
diff --git a/tools/bootconfig/scripts/xbc.sh b/tools/bootconfig/scripts/xbc.sh
index b8c84e654556..1f0ebf50dd2d 100644
--- a/tools/bootconfig/scripts/xbc.sh
+++ b/tools/bootconfig/scripts/xbc.sh
@@ -49,8 +49,8 @@ xbc_has_branch() { # prefix-key
 	grep -q "^$1" $XBC_TMPFILE
 }
 
-xbc_subkeys() { # prefix-key depth
+xbc_subkeys() { # prefix-key depth [subkey-pattern]
 	__keys=`echo $1 | sed "s/\./ /g"`
 	__s=`nr_args $__keys`
-	grep "^$1" $XBC_TMPFILE | cut -d= -f1| cut -d. -f$((__s + 1))-$((__s + $2)) | uniq
+	grep "^$1$3" $XBC_TMPFILE | cut -d= -f1| cut -d. -f$((__s + 1))-$((__s + $2)) | uniq
 }
diff --git a/tools/bootconfig/test-bootconfig.sh b/tools/bootconfig/test-bootconfig.sh
index baed891d0ba4..f68e2e9eef8b 100755
--- a/tools/bootconfig/test-bootconfig.sh
+++ b/tools/bootconfig/test-bootconfig.sh
@@ -26,7 +26,7 @@ trap cleanup EXIT TERM
 NO=1
 
 xpass() { # pass test command
-  echo "test case $NO ($3)... "
+  echo "test case $NO ($*)... "
   if ! ($@ && echo "\t\t[OK]"); then
      echo "\t\t[NG]"; NG=$((NG + 1))
   fi
@@ -34,7 +34,7 @@ xpass() { # pass test command
 }
 
 xfail() { # fail test command
-  echo "test case $NO ($3)... "
+  echo "test case $NO ($*)... "
   if ! (! $@ && echo "\t\t[OK]"); then
      echo "\t\t[NG]"; NG=$((NG + 1))
   fi
diff --git a/tools/build/Makefile b/tools/build/Makefile
index 5ed41b96fcde..6f11e6fc9ffe 100644
--- a/tools/build/Makefile
+++ b/tools/build/Makefile
@@ -32,7 +32,7 @@ all: $(OUTPUT)fixdep
 
 # Make sure there's anything to clean,
 # feature contains check for existing OUTPUT
-TMP_O := $(if $(OUTPUT),$(OUTPUT)/feature,./)
+TMP_O := $(if $(OUTPUT),$(OUTPUT)feature/,./)
 
 clean:
 	$(call QUIET_CLEAN, fixdep)
diff --git a/tools/build/Makefile.feature b/tools/build/Makefile.feature
index 04a8e3db8a54..3dd2f68366f9 100644
--- a/tools/build/Makefile.feature
+++ b/tools/build/Makefile.feature
@@ -34,7 +34,6 @@ FEATURE_TESTS_BASIC :=                  \
         dwarf_getlocations              \
         eventfd                         \
         fortify-source                  \
-        sync-compare-and-swap           \
         get_current_dir_name            \
         gettid				\
         glibc                           \
diff --git a/tools/build/feature/Makefile b/tools/build/feature/Makefile
index ec203e28407f..eff55d287db1 100644
--- a/tools/build/feature/Makefile
+++ b/tools/build/feature/Makefile
@@ -9,7 +9,6 @@ FILES=                                          \
          test-dwarf_getlocations.bin            \
          test-eventfd.bin                       \
          test-fortify-source.bin                \
-         test-sync-compare-and-swap.bin         \
          test-get_current_dir_name.bin          \
          test-glibc.bin                         \
          test-gtk2.bin                          \
@@ -260,9 +259,6 @@ $(OUTPUT)test-libdw-dwarf-unwind.bin:
 $(OUTPUT)test-libbabeltrace.bin:
 	$(BUILD) # -lbabeltrace provided by $(FEATURE_CHECK_LDFLAGS-libbabeltrace)
 
-$(OUTPUT)test-sync-compare-and-swap.bin:
-	$(BUILD)
-
 $(OUTPUT)test-compile-32.bin:
 	$(CC) -m32 -o $@ test-compile.c
 
diff --git a/tools/build/feature/test-all.c b/tools/build/feature/test-all.c
index 464873883396..920439527291 100644
--- a/tools/build/feature/test-all.c
+++ b/tools/build/feature/test-all.c
@@ -106,10 +106,6 @@
 # include "test-libdw-dwarf-unwind.c"
 #undef main
 
-#define main main_test_sync_compare_and_swap
-# include "test-sync-compare-and-swap.c"
-#undef main
-
 #define main main_test_zlib
 # include "test-zlib.c"
 #undef main
diff --git a/tools/build/feature/test-libopencsd.c b/tools/build/feature/test-libopencsd.c
index 52c790b0317b..eb6303ff446e 100644
--- a/tools/build/feature/test-libopencsd.c
+++ b/tools/build/feature/test-libopencsd.c
@@ -4,9 +4,9 @@
 /*
  * Check OpenCSD library version is sufficient to provide required features
  */
-#define OCSD_MIN_VER ((1 << 16) | (0 << 8) | (0))
+#define OCSD_MIN_VER ((1 << 16) | (1 << 8) | (1))
 #if !defined(OCSD_VER_NUM) || (OCSD_VER_NUM < OCSD_MIN_VER)
-#error "OpenCSD >= 1.0.0 is required"
+#error "OpenCSD >= 1.1.1 is required"
 #endif
 
 int main(void)
diff --git a/tools/build/feature/test-sync-compare-and-swap.c b/tools/build/feature/test-sync-compare-and-swap.c
deleted file mode 100644
index 3bc6b0768a53..000000000000
--- a/tools/build/feature/test-sync-compare-and-swap.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <stdint.h>
-
-volatile uint64_t x;
-
-int main(int argc, char *argv[])
-{
-	uint64_t old, new = argc;
-
-	(void)argv;
-	do {
-		old = __sync_val_compare_and_swap(&x, 0, 0);
-	} while (!__sync_bool_compare_and_swap(&x, old, new));
-	return old == new;
-}
diff --git a/tools/include/linux/bitmap.h b/tools/include/linux/bitmap.h
index 9d959bc24859..95611df1d26e 100644
--- a/tools/include/linux/bitmap.h
+++ b/tools/include/linux/bitmap.h
@@ -111,10 +111,10 @@ static inline int test_and_clear_bit(int nr, unsigned long *addr)
 }
 
 /**
- * bitmap_alloc - Allocate bitmap
+ * bitmap_zalloc - Allocate bitmap
  * @nbits: Number of bits
  */
-static inline unsigned long *bitmap_alloc(int nbits)
+static inline unsigned long *bitmap_zalloc(int nbits)
 {
 	return calloc(1, BITS_TO_LONGS(nbits) * sizeof(unsigned long));
 }
diff --git a/tools/include/linux/compiler_types.h b/tools/include/linux/compiler_types.h
index feea09029f61..24ae3054f304 100644
--- a/tools/include/linux/compiler_types.h
+++ b/tools/include/linux/compiler_types.h
@@ -13,6 +13,24 @@
 #define __has_builtin(x) (0)
 #endif
 
+#ifdef __CHECKER__
+/* context/locking */
+# define __must_hold(x)	__attribute__((context(x,1,1)))
+# define __acquires(x)	__attribute__((context(x,0,1)))
+# define __releases(x)	__attribute__((context(x,1,0)))
+# define __acquire(x)	__context__(x,1)
+# define __release(x)	__context__(x,-1)
+# define __cond_lock(x,c)	((c) ? ({ __acquire(x); 1; }) : 0)
+#else /* __CHECKER__ */
+/* context/locking */
+# define __must_hold(x)
+# define __acquires(x)
+# define __releases(x)
+# define __acquire(x)	(void)0
+# define __release(x)	(void)0
+# define __cond_lock(x,c) (c)
+#endif /* __CHECKER__ */
+
 /* Compiler specific macros. */
 #ifdef __GNUC__
 #include <linux/compiler-gcc.h>
diff --git a/tools/lib/perf/cpumap.c b/tools/lib/perf/cpumap.c
index ca0215047c32..6d8e521c59e1 100644
--- a/tools/lib/perf/cpumap.c
+++ b/tools/lib/perf/cpumap.c
@@ -68,6 +68,11 @@ static struct perf_cpu_map *cpu_map__default_new(void)
 	return cpus;
 }
 
+struct perf_cpu_map *perf_cpu_map__default_new(void)
+{
+	return cpu_map__default_new();
+}
+
 static int cmp_int(const void *a, const void *b)
 {
 	return *(const int *)a - *(const int*)b;
@@ -277,14 +282,8 @@ int perf_cpu_map__idx(struct perf_cpu_map *cpus, int cpu)
 
 int perf_cpu_map__max(struct perf_cpu_map *map)
 {
-	int i, max = -1;
-
-	for (i = 0; i < map->nr; i++) {
-		if (map->map[i] > max)
-			max = map->map[i];
-	}
-
-	return max;
+	// cpu_map__trim_new() qsort()s it, cpu_map__default_new() sorts it as well.
+	return map->nr > 0 ? map->map[map->nr - 1] : -1;
 }
 
 /*
diff --git a/tools/lib/perf/include/internal/tests.h b/tools/lib/perf/include/internal/tests.h
index 61052099225b..b130a6663ff8 100644
--- a/tools/lib/perf/include/internal/tests.h
+++ b/tools/lib/perf/include/internal/tests.h
@@ -23,6 +23,8 @@ static inline int get_verbose(char **argv, int argc)
 			break;
 		}
 	}
+	optind = 1;
+
 	return verbose;
 }
 
diff --git a/tools/lib/perf/include/perf/cpumap.h b/tools/lib/perf/include/perf/cpumap.h
index 6a17ad730cbc..7c27766ea0bf 100644
--- a/tools/lib/perf/include/perf/cpumap.h
+++ b/tools/lib/perf/include/perf/cpumap.h
@@ -9,6 +9,7 @@
 struct perf_cpu_map;
 
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__dummy_new(void);
+LIBPERF_API struct perf_cpu_map *perf_cpu_map__default_new(void);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__new(const char *cpu_list);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__read(FILE *file);
 LIBPERF_API struct perf_cpu_map *perf_cpu_map__get(struct perf_cpu_map *map);
diff --git a/tools/lib/subcmd/parse-options.h b/tools/lib/subcmd/parse-options.h
index d2414144eb8c..41b9b942504d 100644
--- a/tools/lib/subcmd/parse-options.h
+++ b/tools/lib/subcmd/parse-options.h
@@ -133,6 +133,7 @@ struct option {
 #define OPT_SET_PTR(s, l, v, h, p)  { .type = OPTION_SET_PTR, .short_name = (s), .long_name = (l), .value = (v), .help = (h), .defval = (p) }
 #define OPT_INTEGER(s, l, v, h)     { .type = OPTION_INTEGER, .short_name = (s), .long_name = (l), .value = check_vtype(v, int *), .help = (h) }
 #define OPT_UINTEGER(s, l, v, h)    { .type = OPTION_UINTEGER, .short_name = (s), .long_name = (l), .value = check_vtype(v, unsigned int *), .help = (h) }
+#define OPT_UINTEGER_OPTARG(s, l, v, d, h)    { .type = OPTION_UINTEGER, .short_name = (s), .long_name = (l), .value = check_vtype(v, unsigned int *), .help = (h), .flags = PARSE_OPT_OPTARG, .defval = (intptr_t)(d) }
 #define OPT_LONG(s, l, v, h)        { .type = OPTION_LONG, .short_name = (s), .long_name = (l), .value = check_vtype(v, long *), .help = (h) }
 #define OPT_ULONG(s, l, v, h)        { .type = OPTION_ULONG, .short_name = (s), .long_name = (l), .value = check_vtype(v, unsigned long *), .help = (h) }
 #define OPT_U64(s, l, v, h)         { .type = OPTION_U64, .short_name = (s), .long_name = (l), .value = check_vtype(v, u64 *), .help = (h) }
diff --git a/tools/pci/pcitest.c b/tools/pci/pcitest.c
index 0a1344c45213..441b54234635 100644
--- a/tools/pci/pcitest.c
+++ b/tools/pci/pcitest.c
@@ -40,7 +40,7 @@ struct pci_test {
 
 static int run_test(struct pci_test *test)
 {
-	struct pci_endpoint_test_xfer_param param;
+	struct pci_endpoint_test_xfer_param param = {};
 	int ret = -EINVAL;
 	int fd;
 
diff --git a/tools/perf/Documentation/Makefile b/tools/perf/Documentation/Makefile
index 6e54979c2124..6e7b88917ca0 100644
--- a/tools/perf/Documentation/Makefile
+++ b/tools/perf/Documentation/Makefile
@@ -2,6 +2,10 @@
 include ../../scripts/Makefile.include
 include ../../scripts/utilities.mak
 
+ARTICLES =
+# with their own formatting rules.
+SP_ARTICLES =
+
 MAN1_TXT= \
 	$(filter-out $(addsuffix .txt, $(ARTICLES) $(SP_ARTICLES)), \
 		$(wildcard perf-*.txt)) \
@@ -16,13 +20,6 @@ _MAN_HTML=$(patsubst %.txt,%.html,$(MAN_TXT))
 MAN_XML=$(addprefix $(OUTPUT),$(_MAN_XML))
 MAN_HTML=$(addprefix $(OUTPUT),$(_MAN_HTML))
 
-ARTICLES =
-# with their own formatting rules.
-SP_ARTICLES =
-API_DOCS = $(patsubst %.txt,%,$(filter-out technical/api-index-skel.txt technical/api-index.txt, $(wildcard technical/api-*.txt)))
-SP_ARTICLES += $(API_DOCS)
-SP_ARTICLES += technical/api-index
-
 _DOC_HTML = $(_MAN_HTML)
 _DOC_HTML+=$(patsubst %,%.html,$(ARTICLES) $(SP_ARTICLES))
 DOC_HTML=$(addprefix $(OUTPUT),$(_DOC_HTML))
@@ -173,7 +170,7 @@ ifneq ($(V),1)
 endif
 endif
 
-all: html man
+all: html man info
 
 html: $(DOC_HTML)
 
@@ -186,8 +183,6 @@ man7: $(DOC_MAN7)
 
 info: $(OUTPUT)perf.info $(OUTPUT)perfman.info
 
-pdf: $(OUTPUT)user-manual.pdf
-
 install: install-man
 
 check-man-tools:
@@ -225,11 +220,6 @@ install-info: info
 	  echo "No directory found in $(DESTDIR)$(infodir)" >&2 ; \
 	fi
 
-install-pdf: pdf
-	$(call QUIET_INSTALL, Documentation-pdf) \
-		$(INSTALL) -d -m 755 $(DESTDIR)$(pdfdir); \
-		$(INSTALL) -m 644 $(OUTPUT)user-manual.pdf $(DESTDIR)$(pdfdir)
-
 #install-html: html
 #	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(DESTDIR)$(htmldir)
 
@@ -244,33 +234,13 @@ $(OUTPUT)doc.dep : $(wildcard *.txt) build-docdep.perl
 
 -include $(OUTPUT)doc.dep
 
-_cmds_txt = cmds-ancillaryinterrogators.txt \
-	cmds-ancillarymanipulators.txt \
-	cmds-mainporcelain.txt \
-	cmds-plumbinginterrogators.txt \
-	cmds-plumbingmanipulators.txt \
-	cmds-synchingrepositories.txt \
-	cmds-synchelpers.txt \
-	cmds-purehelpers.txt \
-	cmds-foreignscminterface.txt
-cmds_txt=$(addprefix $(OUTPUT),$(_cmds_txt))
-
-$(cmds_txt): $(OUTPUT)cmd-list.made
-
-$(OUTPUT)cmd-list.made: cmd-list.perl ../command-list.txt $(MAN1_TXT)
-	$(QUIET_GEN)$(RM) $@ && \
-	$(PERL_PATH) ./cmd-list.perl ../command-list.txt $(QUIET_STDERR) && \
-	date >$@
-
 CLEAN_FILES =									\
 	$(MAN_XML) $(addsuffix +,$(MAN_XML))					\
 	$(MAN_HTML) $(addsuffix +,$(MAN_HTML))					\
 	$(DOC_HTML) $(DOC_MAN1) $(DOC_MAN5) $(DOC_MAN7)				\
 	$(OUTPUT)*.texi $(OUTPUT)*.texi+ $(OUTPUT)*.texi++			\
-	$(OUTPUT)perf.info $(OUTPUT)perfman.info				\
-	$(OUTPUT)howto-index.txt $(OUTPUT)howto/*.html $(OUTPUT)doc.dep		\
-	$(OUTPUT)technical/api-*.html $(OUTPUT)technical/api-index.txt		\
-	$(cmds_txt) $(OUTPUT)*.made
+	$(OUTPUT)perf.info $(OUTPUT)perfman.info $(OUTPUT)doc.dep		\
+	$(OUTPUT)technical/api-*.html $(OUTPUT)technical/api-index.txt
 clean:
 	$(call QUIET_CLEAN, Documentation) $(RM) $(CLEAN_FILES)
 
@@ -304,24 +274,6 @@ $(OUTPUT)%.xml : %.txt
 XSLT = docbook.xsl
 XSLTOPTS = --xinclude --stringparam html.stylesheet docbook-xsl.css
 
-$(OUTPUT)user-manual.html: $(OUTPUT)user-manual.xml
-	$(QUIET_XSLTPROC)xsltproc $(XSLTOPTS) -o $@ $(XSLT) $<
-
-$(OUTPUT)perf.info: $(OUTPUT)user-manual.texi
-	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split -o $@ $(OUTPUT)user-manual.texi
-
-$(OUTPUT)user-manual.texi: $(OUTPUT)user-manual.xml
-	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
-	$(DOCBOOK2X_TEXI) $(OUTPUT)user-manual.xml --encoding=UTF-8 --to-stdout >$@++ && \
-	$(PERL_PATH) fix-texi.perl <$@++ >$@+ && \
-	rm $@++ && \
-	mv $@+ $@
-
-$(OUTPUT)user-manual.pdf: $(OUTPUT)user-manual.xml
-	$(QUIET_DBLATEX)$(RM) $@+ $@ && \
-	$(DBLATEX) -o $@+ -p /etc/asciidoc/dblatex/asciidoc-dblatex.xsl -s /etc/asciidoc/dblatex/asciidoc-dblatex.sty $< && \
-	mv $@+ $@
-
 $(OUTPUT)perfman.texi: $(MAN_XML) cat-texi.perl
 	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
 	($(foreach xml,$(MAN_XML),$(DOCBOOK2X_TEXI) --encoding=UTF-8 \
@@ -331,28 +283,18 @@ $(OUTPUT)perfman.texi: $(MAN_XML) cat-texi.perl
 	mv $@+ $@
 
 $(OUTPUT)perfman.info: $(OUTPUT)perfman.texi
-	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate $*.texi
+	$(QUIET_MAKEINFO)$(MAKEINFO) --no-split --no-validate -o $@ $*.texi
 
 $(patsubst %.txt,%.texi,$(MAN_TXT)): %.texi : %.xml
 	$(QUIET_DB2TEXI)$(RM) $@+ $@ && \
 	$(DOCBOOK2X_TEXI) --to-stdout $*.xml >$@+ && \
 	mv $@+ $@
 
-howto-index.txt: howto-index.sh $(wildcard howto/*.txt)
-	$(QUIET_GEN)$(RM) $@+ $@ && \
-	'$(SHELL_PATH_SQ)' ./howto-index.sh $(wildcard howto/*.txt) >$@+ && \
-	mv $@+ $@
-
 $(patsubst %,%.html,$(ARTICLES)) : %.html : %.txt
 	$(QUIET_ASCIIDOC)$(ASCIIDOC) -b $(ASCIIDOC_HTML) $*.txt
 
 WEBDOC_DEST = /pub/software/tools/perf/docs
 
-$(patsubst %.txt,%.html,$(wildcard howto/*.txt)): %.html : %.txt
-	$(QUIET_ASCIIDOC)$(RM) $@+ $@ && \
-	sed -e '1,/^$$/d' $< | $(ASCIIDOC) -b $(ASCIIDOC_HTML) - >$@+ && \
-	mv $@+ $@
-
 # UNIMPLEMENTED
 #install-webdoc : html
 #	'$(SHELL_PATH_SQ)' ./install-webdoc.sh $(WEBDOC_DEST)
diff --git a/tools/perf/Documentation/build-docdep.perl b/tools/perf/Documentation/build-docdep.perl
new file mode 100755
index 000000000000..ba4205e0302a
--- /dev/null
+++ b/tools/perf/Documentation/build-docdep.perl
@@ -0,0 +1,46 @@
+#!/usr/bin/perl
+
+my %include = ();
+my %included = ();
+
+for my $text (<*.txt>) {
+    open I, '<', $text || die "cannot read: $text";
+    while (<I>) {
+	if (/^include::/) {
+	    chomp;
+	    s/^include::\s*//;
+	    s/\[\]//;
+	    $include{$text}{$_} = 1;
+	    $included{$_} = 1;
+	}
+    }
+    close I;
+}
+
+# Do we care about chained includes???
+my $changed = 1;
+while ($changed) {
+    $changed = 0;
+    while (my ($text, $included) = each %include) {
+	for my $i (keys %$included) {
+	    # $text has include::$i; if $i includes $j
+	    # $text indirectly includes $j.
+	    if (exists $include{$i}) {
+		for my $j (keys %{$include{$i}}) {
+		    if (!exists $include{$text}{$j}) {
+			$include{$text}{$j} = 1;
+			$included{$j} = 1;
+			$changed = 1;
+		    }
+		}
+	    }
+	}
+    }
+}
+
+while (my ($text, $included) = each %include) {
+    if (! exists $included{$text} &&
+	(my $base = $text) =~ s/\.txt$//) {
+	print "$base.html $base.xml : ", join(" ", keys %$included), "\n";
+    }
+}
diff --git a/tools/perf/Documentation/cat-texi.perl b/tools/perf/Documentation/cat-texi.perl
new file mode 100755
index 000000000000..14d2f8341517
--- /dev/null
+++ b/tools/perf/Documentation/cat-texi.perl
@@ -0,0 +1,46 @@
+#!/usr/bin/perl -w
+
+use strict;
+use warnings;
+
+my @menu = ();
+my $output = $ARGV[0];
+
+open my $tmp, '>', "$output.tmp";
+
+while (<STDIN>) {
+	next if (/^\\input texinfo/../\@node Top/);
+	next if (/^\@bye/ || /^\.ft/);
+	if (s/^\@top (.*)/\@node $1,,,Top/) {
+		push @menu, $1;
+	}
+	s/\(\@pxref\{\[(URLS|REMOTES)\]}\)//;
+	s/\@anchor\{[^{}]*\}//g;
+	print $tmp $_;
+}
+close $tmp;
+
+print '\input texinfo
+@setfilename gitman.info
+@documentencoding UTF-8
+@dircategory Development
+@direntry
+* Git Man Pages: (gitman).  Manual pages for Git revision control system
+@end direntry
+@node Top,,, (dir)
+@top Git Manual Pages
+@documentlanguage en
+@menu
+';
+
+for (@menu) {
+	print "* ${_}::\n";
+}
+print "\@end menu\n";
+open $tmp, '<', "$output.tmp";
+while (<$tmp>) {
+	print;
+}
+close $tmp;
+print "\@bye\n";
+unlink "$output.tmp";
diff --git a/tools/perf/Documentation/intel-hybrid.txt b/tools/perf/Documentation/intel-hybrid.txt
index 07f0aa3bf682..c9302096dc46 100644
--- a/tools/perf/Documentation/intel-hybrid.txt
+++ b/tools/perf/Documentation/intel-hybrid.txt
@@ -140,7 +140,7 @@ displayed. The percentage is the event's running time/enabling time.
 One example, 'triad_loop' runs on cpu16 (atom core), while we can see the
 scaled value for core cycles is 160,444,092 and the percentage is 0.47%.
 
-perf stat -e cycles -- taskset -c 16 ./triad_loop
+perf stat -e cycles \-- taskset -c 16 ./triad_loop
 
 As previous, two events are created.
 
diff --git a/tools/perf/Documentation/perf-c2c.txt b/tools/perf/Documentation/perf-c2c.txt
index c81d72e3eecf..de6beedb7283 100644
--- a/tools/perf/Documentation/perf-c2c.txt
+++ b/tools/perf/Documentation/perf-c2c.txt
@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'perf c2c record' [<options>] <command>
-'perf c2c record' [<options>] -- [<record command options>] <command>
+'perf c2c record' [<options>] \-- [<record command options>] <command>
 'perf c2c report' [<options>]
 
 DESCRIPTION
diff --git a/tools/perf/Documentation/perf-dlfilter.txt b/tools/perf/Documentation/perf-dlfilter.txt
index 02842cb4cf90..594f5a5a0c9e 100644
--- a/tools/perf/Documentation/perf-dlfilter.txt
+++ b/tools/perf/Documentation/perf-dlfilter.txt
@@ -32,7 +32,7 @@ The API for filtering consists of the following:
 ----
 #include <perf/perf_dlfilter.h>
 
-const struct perf_dlfilter_fns perf_dlfilter_fns;
+struct perf_dlfilter_fns perf_dlfilter_fns;
 
 int start(void **data, void *ctx);
 int stop(void *data, void *ctx);
@@ -214,7 +214,7 @@ Filter out everything except branches from "foo" to "bar":
 #include <perf/perf_dlfilter.h>
 #include <string.h>
 
-const struct perf_dlfilter_fns perf_dlfilter_fns;
+struct perf_dlfilter_fns perf_dlfilter_fns;
 
 int filter_event(void *data, const struct perf_dlfilter_sample *sample, void *ctx)
 {
@@ -246,6 +246,14 @@ To use the filter with perf script:
 
 	perf script --dlfilter dlfilter-example.so
 
+NOTES
+-----
+
+The dlfilter .so file will be dependent on shared libraries. If those change,
+it may be necessary to rebuild the .so. Also there may be unexpected results
+if the .so uses different versions of the shared libraries that perf uses.
+Versions can be checked using the ldd command.
+
 SEE ALSO
 --------
 linkperf:perf-script[1]
diff --git a/tools/perf/Documentation/perf-iostat.txt b/tools/perf/Documentation/perf-iostat.txt
index 165176944031..04d510364384 100644
--- a/tools/perf/Documentation/perf-iostat.txt
+++ b/tools/perf/Documentation/perf-iostat.txt
@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'perf iostat' list
-'perf iostat' <ports> -- <command> [<options>]
+'perf iostat' <ports> \-- <command> [<options>]
 
 DESCRIPTION
 -----------
@@ -85,4 +85,4 @@ EXAMPLES
 
 SEE ALSO
 --------
-linkperf:perf-stat[1]
\ No newline at end of file
+linkperf:perf-stat[1]
diff --git a/tools/perf/Documentation/perf-record.txt b/tools/perf/Documentation/perf-record.txt
index d71bac847936..f1079ee7f2ec 100644
--- a/tools/perf/Documentation/perf-record.txt
+++ b/tools/perf/Documentation/perf-record.txt
@@ -9,7 +9,7 @@ SYNOPSIS
 --------
 [verse]
 'perf record' [-e <EVENT> | --event=EVENT] [-a] <command>
-'perf record' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
+'perf record' [-e <EVENT> | --event=EVENT] [-a] \-- <command> [<options>]
 
 DESCRIPTION
 -----------
diff --git a/tools/perf/Documentation/perf-script-python.txt b/tools/perf/Documentation/perf-script-python.txt
index 5e43cfa5ea1e..0250dc61cf98 100644
--- a/tools/perf/Documentation/perf-script-python.txt
+++ b/tools/perf/Documentation/perf-script-python.txt
@@ -167,7 +167,7 @@ below).
 
 Following those are the 'event handler' functions generated one for
 every event in the 'perf record' output.  The handler functions take
-the form subsystem__event_name, and contain named parameters, one for
+the form subsystem\__event_name, and contain named parameters, one for
 each field in the event; in this case, there's only one event,
 raw_syscalls__sys_enter().  (see the EVENT HANDLERS section below for
 more info on event handlers).
diff --git a/tools/perf/Documentation/perf-script.txt b/tools/perf/Documentation/perf-script.txt
index aa3a0b2c29a2..c80515243560 100644
--- a/tools/perf/Documentation/perf-script.txt
+++ b/tools/perf/Documentation/perf-script.txt
@@ -106,7 +106,7 @@ OPTIONS
 	Pass 'arg' as an argument to the dlfilter. --dlarg may be repeated
 	to add more arguments.
 
---list-dlfilters=::
+--list-dlfilters::
         Display a list of available dlfilters. Use with option -v (must come
         before option --list-dlfilters) to show long descriptions.
 
diff --git a/tools/perf/Documentation/perf-stat.txt b/tools/perf/Documentation/perf-stat.txt
index 45c2467e4eb2..4c9310be6acc 100644
--- a/tools/perf/Documentation/perf-stat.txt
+++ b/tools/perf/Documentation/perf-stat.txt
@@ -9,8 +9,8 @@ SYNOPSIS
 --------
 [verse]
 'perf stat' [-e <EVENT> | --event=EVENT] [-a] <command>
-'perf stat' [-e <EVENT> | --event=EVENT] [-a] -- <command> [<options>]
-'perf stat' [-e <EVENT> | --event=EVENT] [-a] record [-o file] -- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] \-- <command> [<options>]
+'perf stat' [-e <EVENT> | --event=EVENT] [-a] record [-o file] \-- <command> [<options>]
 'perf stat' report [-i file]
 
 DESCRIPTION
@@ -217,8 +217,8 @@ Append to the output file designated with the -o option. Ignored if -o is not sp
 
 Log output to fd, instead of stderr.  Complementary to --output, and mutually exclusive
 with it.  --append may be used here.  Examples:
-     3>results  perf stat --log-fd 3          -- $cmd
-     3>>results perf stat --log-fd 3 --append -- $cmd
+     3>results  perf stat --log-fd 3          \-- $cmd
+     3>>results perf stat --log-fd 3 --append \-- $cmd
 
 --control=fifo:ctl-fifo[,ack-fifo]::
 --control=fd:ctl-fd[,ack-fd]::
@@ -245,7 +245,7 @@ disable events during measurements:
 
  perf stat -D -1 -e cpu-cycles -a -I 1000       \
            --control fd:${ctl_fd},${ctl_fd_ack} \
-           -- sleep 30 &
+           \-- sleep 30 &
  perf_pid=$!
 
  sleep 5  && echo 'enable' >&${ctl_fd} && read -u ${ctl_fd_ack} e1 && echo "enabled(${e1})"
@@ -265,7 +265,7 @@ disable events during measurements:
 --post::
 	Pre and post measurement hooks, e.g.:
 
-perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' -- make -s -j64 O=defconfig-build/ bzImage
+perf stat --repeat 10 --null --sync --pre 'make -s O=defconfig-build/clean' \-- make -s -j64 O=defconfig-build/ bzImage
 
 -I msecs::
 --interval-print msecs::
@@ -496,7 +496,7 @@ $ perf config stat.no-csv-summary=true
 EXAMPLES
 --------
 
-$ perf stat -- make
+$ perf stat \-- make
 
    Performance counter stats for 'make':
 
diff --git a/tools/perf/Makefile.config b/tools/perf/Makefile.config
index eb8e487ef90b..b66cf128cbc7 100644
--- a/tools/perf/Makefile.config
+++ b/tools/perf/Makefile.config
@@ -133,10 +133,10 @@ FEATURE_CHECK_LDFLAGS-libunwind = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
 FEATURE_CHECK_CFLAGS-libunwind-debug-frame = $(LIBUNWIND_CFLAGS)
 FEATURE_CHECK_LDFLAGS-libunwind-debug-frame = $(LIBUNWIND_LDFLAGS) $(LIBUNWIND_LIBS)
 
-FEATURE_CHECK_LDFLAGS-libunwind-arm = -lunwind -lunwind-arm
-FEATURE_CHECK_LDFLAGS-libunwind-aarch64 = -lunwind -lunwind-aarch64
-FEATURE_CHECK_LDFLAGS-libunwind-x86 = -lunwind -llzma -lunwind-x86
-FEATURE_CHECK_LDFLAGS-libunwind-x86_64 = -lunwind -llzma -lunwind-x86_64
+FEATURE_CHECK_LDFLAGS-libunwind-arm += -lunwind -lunwind-arm
+FEATURE_CHECK_LDFLAGS-libunwind-aarch64 += -lunwind -lunwind-aarch64
+FEATURE_CHECK_LDFLAGS-libunwind-x86 += -lunwind -llzma -lunwind-x86
+FEATURE_CHECK_LDFLAGS-libunwind-x86_64 += -lunwind -llzma -lunwind-x86_64
 
 FEATURE_CHECK_LDFLAGS-libcrypto = -lcrypto
 
@@ -349,10 +349,6 @@ CXXFLAGS += $(INC_FLAGS)
 
 LIBPERF_CFLAGS := $(CORE_CFLAGS) $(EXTRA_CFLAGS)
 
-ifeq ($(feature-sync-compare-and-swap), 1)
-  CFLAGS += -DHAVE_SYNC_COMPARE_AND_SWAP_SUPPORT
-endif
-
 ifeq ($(feature-pthread-attr-setaffinity-np), 1)
   CFLAGS += -DHAVE_PTHREAD_ATTR_SETAFFINITY_NP
 endif
@@ -493,6 +489,8 @@ ifdef CORESIGHT
         CFLAGS += -DCS_RAW_PACKED
       endif
     endif
+  else
+    dummy := $(error Error: No libopencsd library found or the version is not up-to-date. Please install recent libopencsd to build with CORESIGHT=1)
   endif
 endif
 
diff --git a/tools/perf/Makefile.perf b/tools/perf/Makefile.perf
index 77e7f18c0bd0..e04313c4d840 100644
--- a/tools/perf/Makefile.perf
+++ b/tools/perf/Makefile.perf
@@ -360,8 +360,11 @@ ifndef NO_JVMTI
 PROGRAMS += $(OUTPUT)$(LIBJVMTI)
 endif
 
+DLFILTERS := dlfilter-test-api-v0.so
+DLFILTERS := $(patsubst %,$(OUTPUT)dlfilters/%,$(DLFILTERS))
+
 # what 'all' will build and 'install' will install, in perfexecdir
-ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
+ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS) $(DLFILTERS)
 
 # what 'all' will build but not install in perfexecdir
 OTHER_PROGRAMS = $(OUTPUT)perf
@@ -780,6 +783,13 @@ $(OUTPUT)perf-read-vdsox32: perf-read-vdso.c util/find-map.c
 	$(QUIET_CC)$(CC) -mx32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c
 endif
 
+$(OUTPUT)dlfilters/%.o: dlfilters/%.c include/perf/perf_dlfilter.h
+	$(Q)$(MKDIR) -p $(OUTPUT)dlfilters
+	$(QUIET_CC)$(CC) -c -Iinclude $(EXTRA_CFLAGS) -o $@ -fpic $<
+
+$(OUTPUT)dlfilters/%.so: $(OUTPUT)dlfilters/%.o
+	$(QUIET_LINK)$(CC) $(EXTRA_CFLAGS) -shared -o $@ $<
+
 ifndef NO_JVMTI
 LIBJVMTI_IN := $(OUTPUT)jvmti/jvmti-in.o
 
@@ -925,7 +935,7 @@ install-tools: all install-gtk
 		$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'; \
 		$(LN) '$(DESTDIR_SQ)$(bindir_SQ)/perf' '$(DESTDIR_SQ)$(bindir_SQ)/trace'; \
 		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(includedir_SQ)/perf'; \
-		$(INSTALL) util/perf_dlfilter.h -t '$(DESTDIR_SQ)$(includedir_SQ)/perf'
+		$(INSTALL) -m 644 include/perf/perf_dlfilter.h -t '$(DESTDIR_SQ)$(includedir_SQ)/perf'
 ifndef NO_PERF_READ_VDSO32
 	$(call QUIET_INSTALL, perf-read-vdso32) \
 		$(INSTALL) $(OUTPUT)perf-read-vdso32 '$(DESTDIR_SQ)$(bindir_SQ)';
@@ -978,6 +988,9 @@ ifndef NO_LIBPYTHON
 		$(INSTALL) scripts/python/*.py -m 644 -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python'; \
 		$(INSTALL) scripts/python/bin/* -t '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/scripts/python/bin'
 endif
+	$(call QUIET_INSTALL, dlfilters) \
+		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/dlfilters'; \
+		$(INSTALL) $(DLFILTERS) '$(DESTDIR_SQ)$(perfexec_instdir_SQ)/dlfilters';
 	$(call QUIET_INSTALL, perf_completion-script) \
 		$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d'; \
 		$(INSTALL) perf-completion.sh '$(DESTDIR_SQ)$(sysconfdir_SQ)/bash_completion.d/perf'
diff --git a/tools/perf/arch/arm/util/auxtrace.c b/tools/perf/arch/arm/util/auxtrace.c
index b187bddbd01a..c7c7ec0812d5 100644
--- a/tools/perf/arch/arm/util/auxtrace.c
+++ b/tools/perf/arch/arm/util/auxtrace.c
@@ -107,3 +107,35 @@ struct auxtrace_record
 	*err = 0;
 	return NULL;
 }
+
+#if defined(__arm__)
+u64 compat_auxtrace_mmap__read_head(struct auxtrace_mmap *mm)
+{
+	struct perf_event_mmap_page *pc = mm->userpg;
+	u64 result;
+
+	__asm__ __volatile__(
+"	ldrd    %0, %H0, [%1]"
+	: "=&r" (result)
+	: "r" (&pc->aux_head), "Qo" (pc->aux_head)
+	);
+
+	return result;
+}
+
+int compat_auxtrace_mmap__write_tail(struct auxtrace_mmap *mm, u64 tail)
+{
+	struct perf_event_mmap_page *pc = mm->userpg;
+
+	/* Ensure all reads are done before we write the tail out */
+	smp_mb();
+
+	__asm__ __volatile__(
+"	strd    %2, %H2, [%1]"
+	: "=Qo" (pc->aux_tail)
+	: "r" (&pc->aux_tail), "r" (tail)
+	);
+
+	return 0;
+}
+#endif
diff --git a/tools/perf/arch/arm/util/cs-etm.c b/tools/perf/arch/arm/util/cs-etm.c
index 85168d87b2d7..515aae470e23 100644
--- a/tools/perf/arch/arm/util/cs-etm.c
+++ b/tools/perf/arch/arm/util/cs-etm.c
@@ -47,15 +47,17 @@ static const char *metadata_etmv3_ro[CS_ETM_PRIV_MAX] = {
 	[CS_ETM_ETMIDR]		= "mgmt/etmidr",
 };
 
-static const char *metadata_etmv4_ro[CS_ETMV4_PRIV_MAX] = {
+static const char * const metadata_etmv4_ro[] = {
 	[CS_ETMV4_TRCIDR0]		= "trcidr/trcidr0",
 	[CS_ETMV4_TRCIDR1]		= "trcidr/trcidr1",
 	[CS_ETMV4_TRCIDR2]		= "trcidr/trcidr2",
 	[CS_ETMV4_TRCIDR8]		= "trcidr/trcidr8",
 	[CS_ETMV4_TRCAUTHSTATUS]	= "mgmt/trcauthstatus",
+	[CS_ETE_TRCDEVARCH]		= "mgmt/trcdevarch"
 };
 
 static bool cs_etm_is_etmv4(struct auxtrace_record *itr, int cpu);
+static bool cs_etm_is_ete(struct auxtrace_record *itr, int cpu);
 
 static int cs_etm_set_context_id(struct auxtrace_record *itr,
 				 struct evsel *evsel, int cpu)
@@ -73,7 +75,7 @@ static int cs_etm_set_context_id(struct auxtrace_record *itr,
 	if (!cs_etm_is_etmv4(itr, cpu))
 		goto out;
 
-	/* Get a handle on TRCIRD2 */
+	/* Get a handle on TRCIDR2 */
 	snprintf(path, PATH_MAX, "cpu%d/%s",
 		 cpu, metadata_etmv4_ro[CS_ETMV4_TRCIDR2]);
 	err = perf_pmu__scan_file(cs_etm_pmu, path, "%x", &val);
@@ -533,7 +535,7 @@ cs_etm_info_priv_size(struct auxtrace_record *itr __maybe_unused,
 		      struct evlist *evlist __maybe_unused)
 {
 	int i;
-	int etmv3 = 0, etmv4 = 0;
+	int etmv3 = 0, etmv4 = 0, ete = 0;
 	struct perf_cpu_map *event_cpus = evlist->core.cpus;
 	struct perf_cpu_map *online_cpus = perf_cpu_map__new(NULL);
 
@@ -544,7 +546,9 @@ cs_etm_info_priv_size(struct auxtrace_record *itr __maybe_unused,
 			    !cpu_map__has(online_cpus, i))
 				continue;
 
-			if (cs_etm_is_etmv4(itr, i))
+			if (cs_etm_is_ete(itr, i))
+				ete++;
+			else if (cs_etm_is_etmv4(itr, i))
 				etmv4++;
 			else
 				etmv3++;
@@ -555,7 +559,9 @@ cs_etm_info_priv_size(struct auxtrace_record *itr __maybe_unused,
 			if (!cpu_map__has(online_cpus, i))
 				continue;
 
-			if (cs_etm_is_etmv4(itr, i))
+			if (cs_etm_is_ete(itr, i))
+				ete++;
+			else if (cs_etm_is_etmv4(itr, i))
 				etmv4++;
 			else
 				etmv3++;
@@ -565,6 +571,7 @@ cs_etm_info_priv_size(struct auxtrace_record *itr __maybe_unused,
 	perf_cpu_map__put(online_cpus);
 
 	return (CS_ETM_HEADER_SIZE +
+	       (ete   * CS_ETE_PRIV_SIZE) +
 	       (etmv4 * CS_ETMV4_PRIV_SIZE) +
 	       (etmv3 * CS_ETMV3_PRIV_SIZE));
 }
@@ -607,6 +614,49 @@ static int cs_etm_get_ro(struct perf_pmu *pmu, int cpu, const char *path)
 	return val;
 }
 
+#define TRCDEVARCH_ARCHPART_SHIFT 0
+#define TRCDEVARCH_ARCHPART_MASK  GENMASK(11, 0)
+#define TRCDEVARCH_ARCHPART(x)    (((x) & TRCDEVARCH_ARCHPART_MASK) >> TRCDEVARCH_ARCHPART_SHIFT)
+
+#define TRCDEVARCH_ARCHVER_SHIFT 12
+#define TRCDEVARCH_ARCHVER_MASK  GENMASK(15, 12)
+#define TRCDEVARCH_ARCHVER(x)    (((x) & TRCDEVARCH_ARCHVER_MASK) >> TRCDEVARCH_ARCHVER_SHIFT)
+
+static bool cs_etm_is_ete(struct auxtrace_record *itr, int cpu)
+{
+	struct cs_etm_recording *ptr = container_of(itr, struct cs_etm_recording, itr);
+	struct perf_pmu *cs_etm_pmu = ptr->cs_etm_pmu;
+	int trcdevarch = cs_etm_get_ro(cs_etm_pmu, cpu, metadata_etmv4_ro[CS_ETE_TRCDEVARCH]);
+
+	/*
+	 * ETE if ARCHVER is 5 (ARCHVER is 4 for ETM) and ARCHPART is 0xA13.
+	 * See ETM_DEVARCH_ETE_ARCH in coresight-etm4x.h
+	 */
+	return TRCDEVARCH_ARCHVER(trcdevarch) == 5 && TRCDEVARCH_ARCHPART(trcdevarch) == 0xA13;
+}
+
+static void cs_etm_save_etmv4_header(__u64 data[], struct auxtrace_record *itr, int cpu)
+{
+	struct cs_etm_recording *ptr = container_of(itr, struct cs_etm_recording, itr);
+	struct perf_pmu *cs_etm_pmu = ptr->cs_etm_pmu;
+
+	/* Get trace configuration register */
+	data[CS_ETMV4_TRCCONFIGR] = cs_etmv4_get_config(itr);
+	/* Get traceID from the framework */
+	data[CS_ETMV4_TRCTRACEIDR] = coresight_get_trace_id(cpu);
+	/* Get read-only information from sysFS */
+	data[CS_ETMV4_TRCIDR0] = cs_etm_get_ro(cs_etm_pmu, cpu,
+					       metadata_etmv4_ro[CS_ETMV4_TRCIDR0]);
+	data[CS_ETMV4_TRCIDR1] = cs_etm_get_ro(cs_etm_pmu, cpu,
+					       metadata_etmv4_ro[CS_ETMV4_TRCIDR1]);
+	data[CS_ETMV4_TRCIDR2] = cs_etm_get_ro(cs_etm_pmu, cpu,
+					       metadata_etmv4_ro[CS_ETMV4_TRCIDR2]);
+	data[CS_ETMV4_TRCIDR8] = cs_etm_get_ro(cs_etm_pmu, cpu,
+					       metadata_etmv4_ro[CS_ETMV4_TRCIDR8]);
+	data[CS_ETMV4_TRCAUTHSTATUS] = cs_etm_get_ro(cs_etm_pmu, cpu,
+						     metadata_etmv4_ro[CS_ETMV4_TRCAUTHSTATUS]);
+}
+
 static void cs_etm_get_metadata(int cpu, u32 *offset,
 				struct auxtrace_record *itr,
 				struct perf_record_auxtrace_info *info)
@@ -618,31 +668,20 @@ static void cs_etm_get_metadata(int cpu, u32 *offset,
 	struct perf_pmu *cs_etm_pmu = ptr->cs_etm_pmu;
 
 	/* first see what kind of tracer this cpu is affined to */
-	if (cs_etm_is_etmv4(itr, cpu)) {
-		magic = __perf_cs_etmv4_magic;
-		/* Get trace configuration register */
-		info->priv[*offset + CS_ETMV4_TRCCONFIGR] =
-						cs_etmv4_get_config(itr);
-		/* Get traceID from the framework */
-		info->priv[*offset + CS_ETMV4_TRCTRACEIDR] =
-						coresight_get_trace_id(cpu);
-		/* Get read-only information from sysFS */
-		info->priv[*offset + CS_ETMV4_TRCIDR0] =
-			cs_etm_get_ro(cs_etm_pmu, cpu,
-				      metadata_etmv4_ro[CS_ETMV4_TRCIDR0]);
-		info->priv[*offset + CS_ETMV4_TRCIDR1] =
+	if (cs_etm_is_ete(itr, cpu)) {
+		magic = __perf_cs_ete_magic;
+		/* ETE uses the same registers as ETMv4 plus TRCDEVARCH */
+		cs_etm_save_etmv4_header(&info->priv[*offset], itr, cpu);
+		info->priv[*offset + CS_ETE_TRCDEVARCH] =
 			cs_etm_get_ro(cs_etm_pmu, cpu,
-				      metadata_etmv4_ro[CS_ETMV4_TRCIDR1]);
-		info->priv[*offset + CS_ETMV4_TRCIDR2] =
-			cs_etm_get_ro(cs_etm_pmu, cpu,
-				      metadata_etmv4_ro[CS_ETMV4_TRCIDR2]);
-		info->priv[*offset + CS_ETMV4_TRCIDR8] =
-			cs_etm_get_ro(cs_etm_pmu, cpu,
-				      metadata_etmv4_ro[CS_ETMV4_TRCIDR8]);
-		info->priv[*offset + CS_ETMV4_TRCAUTHSTATUS] =
-			cs_etm_get_ro(cs_etm_pmu, cpu,
-				      metadata_etmv4_ro
-				      [CS_ETMV4_TRCAUTHSTATUS]);
+				      metadata_etmv4_ro[CS_ETE_TRCDEVARCH]);
+
+		/* How much space was used */
+		increment = CS_ETE_PRIV_MAX;
+		nr_trc_params = CS_ETE_PRIV_MAX - CS_ETM_COMMON_BLK_MAX_V1;
+	} else if (cs_etm_is_etmv4(itr, cpu)) {
+		magic = __perf_cs_etmv4_magic;
+		cs_etm_save_etmv4_header(&info->priv[*offset], itr, cpu);
 
 		/* How much space was used */
 		increment = CS_ETMV4_PRIV_MAX;
diff --git a/tools/perf/arch/x86/util/pmu.c b/tools/perf/arch/x86/util/pmu.c
index d48d608517fd..74d69db1ea99 100644
--- a/tools/perf/arch/x86/util/pmu.c
+++ b/tools/perf/arch/x86/util/pmu.c
@@ -1,12 +1,30 @@
 // SPDX-License-Identifier: GPL-2.0
 #include <string.h>
-
+#include <stdio.h>
+#include <sys/types.h>
+#include <dirent.h>
+#include <fcntl.h>
 #include <linux/stddef.h>
 #include <linux/perf_event.h>
+#include <linux/zalloc.h>
+#include <api/fs/fs.h>
+#include <errno.h>
 
 #include "../../../util/intel-pt.h"
 #include "../../../util/intel-bts.h"
 #include "../../../util/pmu.h"
+#include "../../../util/fncache.h"
+
+#define TEMPLATE_ALIAS	"%s/bus/event_source/devices/%s/alias"
+
+struct pmu_alias {
+	char *name;
+	char *alias;
+	struct list_head list;
+};
+
+static LIST_HEAD(pmu_alias_name_list);
+static bool cached_list;
 
 struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused)
 {
@@ -18,3 +36,138 @@ struct perf_event_attr *perf_pmu__get_default_config(struct perf_pmu *pmu __mayb
 #endif
 	return NULL;
 }
+
+static void pmu_alias__delete(struct pmu_alias *pmu_alias)
+{
+	if (!pmu_alias)
+		return;
+
+	zfree(&pmu_alias->name);
+	zfree(&pmu_alias->alias);
+	free(pmu_alias);
+}
+
+static struct pmu_alias *pmu_alias__new(char *name, char *alias)
+{
+	struct pmu_alias *pmu_alias = zalloc(sizeof(*pmu_alias));
+
+	if (pmu_alias) {
+		pmu_alias->name = strdup(name);
+		if (!pmu_alias->name)
+			goto out_delete;
+
+		pmu_alias->alias = strdup(alias);
+		if (!pmu_alias->alias)
+			goto out_delete;
+	}
+	return pmu_alias;
+
+out_delete:
+	pmu_alias__delete(pmu_alias);
+	return NULL;
+}
+
+static int setup_pmu_alias_list(void)
+{
+	char path[PATH_MAX];
+	DIR *dir;
+	struct dirent *dent;
+	const char *sysfs = sysfs__mountpoint();
+	struct pmu_alias *pmu_alias;
+	char buf[MAX_PMU_NAME_LEN];
+	FILE *file;
+	int ret = -ENOMEM;
+
+	if (!sysfs)
+		return -1;
+
+	snprintf(path, PATH_MAX,
+		 "%s" EVENT_SOURCE_DEVICE_PATH, sysfs);
+
+	dir = opendir(path);
+	if (!dir)
+		return -errno;
+
+	while ((dent = readdir(dir))) {
+		if (!strcmp(dent->d_name, ".") ||
+		    !strcmp(dent->d_name, ".."))
+			continue;
+
+		snprintf(path, PATH_MAX,
+			 TEMPLATE_ALIAS, sysfs, dent->d_name);
+
+		if (!file_available(path))
+			continue;
+
+		file = fopen(path, "r");
+		if (!file)
+			continue;
+
+		if (!fgets(buf, sizeof(buf), file)) {
+			fclose(file);
+			continue;
+		}
+
+		fclose(file);
+
+		/* Remove the last '\n' */
+		buf[strlen(buf) - 1] = 0;
+
+		pmu_alias = pmu_alias__new(dent->d_name, buf);
+		if (!pmu_alias)
+			goto close_dir;
+
+		list_add_tail(&pmu_alias->list, &pmu_alias_name_list);
+	}
+
+	ret = 0;
+
+close_dir:
+	closedir(dir);
+	return ret;
+}
+
+static char *__pmu_find_real_name(const char *name)
+{
+	struct pmu_alias *pmu_alias;
+
+	list_for_each_entry(pmu_alias, &pmu_alias_name_list, list) {
+		if (!strcmp(name, pmu_alias->alias))
+			return pmu_alias->name;
+	}
+
+	return (char *)name;
+}
+
+char *pmu_find_real_name(const char *name)
+{
+	if (cached_list)
+		return __pmu_find_real_name(name);
+
+	setup_pmu_alias_list();
+	cached_list = true;
+
+	return __pmu_find_real_name(name);
+}
+
+static char *__pmu_find_alias_name(const char *name)
+{
+	struct pmu_alias *pmu_alias;
+
+	list_for_each_entry(pmu_alias, &pmu_alias_name_list, list) {
+		if (!strcmp(name, pmu_alias->name))
+			return pmu_alias->alias;
+	}
+	return NULL;
+}
+
+char *pmu_find_alias_name(const char *name)
+{
+	if (cached_list)
+		return __pmu_find_alias_name(name);
+
+	setup_pmu_alias_list();
+	cached_list = true;
+
+	return __pmu_find_alias_name(name);
+}
diff --git a/tools/perf/bench/Build b/tools/perf/bench/Build
index e43f46931b41..61d45fcb4057 100644
--- a/tools/perf/bench/Build
+++ b/tools/perf/bench/Build
@@ -13,6 +13,7 @@ perf-y += synthesize.o
 perf-y += kallsyms-parse.o
 perf-y += find-bit-bench.o
 perf-y += inject-buildid.o
+perf-y += evlist-open-close.o
 
 perf-$(CONFIG_X86_64) += mem-memcpy-x86-64-asm.o
 perf-$(CONFIG_X86_64) += mem-memset-x86-64-asm.o
diff --git a/tools/perf/bench/bench.h b/tools/perf/bench/bench.h
index eac36afab2b3..b3480bc33fe8 100644
--- a/tools/perf/bench/bench.h
+++ b/tools/perf/bench/bench.h
@@ -48,6 +48,7 @@ int bench_epoll_ctl(int argc, const char **argv);
 int bench_synthesize(int argc, const char **argv);
 int bench_kallsyms_parse(int argc, const char **argv);
 int bench_inject_build_id(int argc, const char **argv);
+int bench_evlist_open_close(int argc, const char **argv);
 
 #define BENCH_FORMAT_DEFAULT_STR	"default"
 #define BENCH_FORMAT_DEFAULT		0
diff --git a/tools/perf/bench/evlist-open-close.c b/tools/perf/bench/evlist-open-close.c
new file mode 100644
index 000000000000..83e9897c64a1
--- /dev/null
+++ b/tools/perf/bench/evlist-open-close.c
@@ -0,0 +1,258 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <inttypes.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <limits.h>
+#include "bench.h"
+#include "../util/debug.h"
+#include "../util/stat.h"
+#include "../util/evlist.h"
+#include "../util/evsel.h"
+#include "../util/strbuf.h"
+#include "../util/record.h"
+#include "../util/parse-events.h"
+#include "internal/threadmap.h"
+#include "internal/cpumap.h"
+#include <linux/perf_event.h>
+#include <linux/kernel.h>
+#include <linux/time64.h>
+#include <linux/string.h>
+#include <subcmd/parse-options.h>
+
+#define MMAP_FLUSH_DEFAULT 1
+
+static int iterations = 100;
+static int nr_events = 1;
+static const char *event_string = "dummy";
+
+static struct record_opts opts = {
+	.sample_time	     = true,
+	.mmap_pages	     = UINT_MAX,
+	.user_freq	     = UINT_MAX,
+	.user_interval	     = ULLONG_MAX,
+	.freq		     = 4000,
+	.target		     = {
+		.uses_mmap   = true,
+		.default_per_cpu = true,
+	},
+	.mmap_flush          = MMAP_FLUSH_DEFAULT,
+	.nr_threads_synthesize = 1,
+	.ctl_fd              = -1,
+	.ctl_fd_ack          = -1,
+};
+
+static const struct option options[] = {
+	OPT_STRING('e', "event", &event_string, "event", "event selector. use 'perf list' to list available events"),
+	OPT_INTEGER('n', "nr-events", &nr_events,
+		     "number of dummy events to create (default 1). If used with -e, it clones those events n times (1 = no change)"),
+	OPT_INTEGER('i', "iterations", &iterations, "Number of iterations used to compute average (default=100)"),
+	OPT_BOOLEAN('a', "all-cpus", &opts.target.system_wide, "system-wide collection from all CPUs"),
+	OPT_STRING('C', "cpu", &opts.target.cpu_list, "cpu", "list of cpus where to open events"),
+	OPT_STRING('p', "pid", &opts.target.pid, "pid", "record events on existing process id"),
+	OPT_STRING('t', "tid", &opts.target.tid, "tid", "record events on existing thread id"),
+	OPT_STRING('u', "uid", &opts.target.uid_str, "user", "user to profile"),
+	OPT_BOOLEAN(0, "per-thread", &opts.target.per_thread, "use per-thread mmaps"),
+	OPT_END()
+};
+
+static const char *const bench_usage[] = {
+	"perf bench internals evlist-open-close <options>",
+	NULL
+};
+
+static int evlist__count_evsel_fds(struct evlist *evlist)
+{
+	struct evsel *evsel;
+	int cnt = 0;
+
+	evlist__for_each_entry(evlist, evsel)
+		cnt += evsel->core.threads->nr * evsel->core.cpus->nr;
+
+	return cnt;
+}
+
+static struct evlist *bench__create_evlist(char *evstr)
+{
+	struct parse_events_error err = { .idx = 0, };
+	struct evlist *evlist = evlist__new();
+	int ret;
+
+	if (!evlist) {
+		pr_err("Not enough memory to create evlist\n");
+		return NULL;
+	}
+
+	ret = parse_events(evlist, evstr, &err);
+	if (ret) {
+		parse_events_print_error(&err, evstr);
+		pr_err("Run 'perf list' for a list of valid events\n");
+		ret = 1;
+		goto out_delete_evlist;
+	}
+
+	ret = evlist__create_maps(evlist, &opts.target);
+	if (ret < 0) {
+		pr_err("Not enough memory to create thread/cpu maps\n");
+		goto out_delete_evlist;
+	}
+
+	evlist__config(evlist, &opts, NULL);
+
+	return evlist;
+
+out_delete_evlist:
+	evlist__delete(evlist);
+	return NULL;
+}
+
+static int bench__do_evlist_open_close(struct evlist *evlist)
+{
+	char sbuf[STRERR_BUFSIZE];
+	int err = evlist__open(evlist);
+
+	if (err < 0) {
+		pr_err("evlist__open: %s\n", str_error_r(errno, sbuf, sizeof(sbuf)));
+		return err;
+	}
+
+	err = evlist__mmap(evlist, opts.mmap_pages);
+	if (err < 0) {
+		pr_err("evlist__mmap: %s\n", str_error_r(errno, sbuf, sizeof(sbuf)));
+		return err;
+	}
+
+	evlist__enable(evlist);
+	evlist__disable(evlist);
+	evlist__munmap(evlist);
+	evlist__close(evlist);
+
+	return 0;
+}
+
+static int bench_evlist_open_close__run(char *evstr)
+{
+	// used to print statistics only
+	struct evlist *evlist = bench__create_evlist(evstr);
+	double time_average, time_stddev;
+	struct timeval start, end, diff;
+	struct stats time_stats;
+	u64 runtime_us;
+	int i, err;
+
+	if (!evlist)
+		return -ENOMEM;
+
+	init_stats(&time_stats);
+
+	printf("  Number of cpus:\t%d\n", evlist->core.cpus->nr);
+	printf("  Number of threads:\t%d\n", evlist->core.threads->nr);
+	printf("  Number of events:\t%d (%d fds)\n",
+		evlist->core.nr_entries, evlist__count_evsel_fds(evlist));
+	printf("  Number of iterations:\t%d\n", iterations);
+
+	evlist__delete(evlist);
+
+	for (i = 0; i < iterations; i++) {
+		pr_debug("Started iteration %d\n", i);
+		evlist = bench__create_evlist(evstr);
+		if (!evlist)
+			return -ENOMEM;
+
+		gettimeofday(&start, NULL);
+		err = bench__do_evlist_open_close(evlist);
+		if (err) {
+			evlist__delete(evlist);
+			return err;
+		}
+
+		gettimeofday(&end, NULL);
+		timersub(&end, &start, &diff);
+		runtime_us = diff.tv_sec * USEC_PER_SEC + diff.tv_usec;
+		update_stats(&time_stats, runtime_us);
+
+		evlist__delete(evlist);
+		pr_debug("Iteration %d took:\t%" PRIu64 "us\n", i, runtime_us);
+	}
+
+	time_average = avg_stats(&time_stats);
+	time_stddev = stddev_stats(&time_stats);
+	printf("  Average open-close took: %.3f usec (+- %.3f usec)\n", time_average, time_stddev);
+
+	return 0;
+}
+
+static char *bench__repeat_event_string(const char *evstr, int n)
+{
+	char sbuf[STRERR_BUFSIZE];
+	struct strbuf buf;
+	int i, str_size = strlen(evstr),
+	    final_size = str_size * n + n,
+	    err = strbuf_init(&buf, final_size);
+
+	if (err) {
+		pr_err("strbuf_init: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));
+		goto out_error;
+	}
+
+	for (i = 0; i < n; i++) {
+		err = strbuf_add(&buf, evstr, str_size);
+		if (err) {
+			pr_err("strbuf_add: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));
+			goto out_error;
+		}
+
+		err = strbuf_addch(&buf, i == n-1 ? '\0' : ',');
+		if (err) {
+			pr_err("strbuf_addch: %s\n", str_error_r(err, sbuf, sizeof(sbuf)));
+			goto out_error;
+		}
+	}
+
+	return strbuf_detach(&buf, NULL);
+
+out_error:
+	strbuf_release(&buf);
+	return NULL;
+}
+
+
+int bench_evlist_open_close(int argc, const char **argv)
+{
+	char *evstr, errbuf[BUFSIZ];
+	int err;
+
+	argc = parse_options(argc, argv, options, bench_usage, 0);
+	if (argc) {
+		usage_with_options(bench_usage, options);
+		exit(EXIT_FAILURE);
+	}
+
+	err = target__validate(&opts.target);
+	if (err) {
+		target__strerror(&opts.target, err, errbuf, sizeof(errbuf));
+		pr_err("%s\n", errbuf);
+		goto out;
+	}
+
+	err = target__parse_uid(&opts.target);
+	if (err) {
+		target__strerror(&opts.target, err, errbuf, sizeof(errbuf));
+		pr_err("%s", errbuf);
+		goto out;
+	}
+
+	/* Enable ignoring missing threads when -u/-p option is defined. */
+	opts.ignore_missing_thread = opts.target.uid != UINT_MAX || opts.target.pid;
+
+	evstr = bench__repeat_event_string(event_string, nr_events);
+	if (!evstr) {
+		err = -ENOMEM;
+		goto out;
+	}
+
+	err = bench_evlist_open_close__run(evstr);
+
+	free(evstr);
+out:
+	return err;
+}
diff --git a/tools/perf/bench/find-bit-bench.c b/tools/perf/bench/find-bit-bench.c
index 73b5bcc5946a..22b5cfe97023 100644
--- a/tools/perf/bench/find-bit-bench.c
+++ b/tools/perf/bench/find-bit-bench.c
@@ -54,7 +54,7 @@ static bool asm_test_bit(long nr, const unsigned long *addr)
 
 static int do_for_each_set_bit(unsigned int num_bits)
 {
-	unsigned long *to_test = bitmap_alloc(num_bits);
+	unsigned long *to_test = bitmap_zalloc(num_bits);
 	struct timeval start, end, diff;
 	u64 runtime_us;
 	struct stats fb_time_stats, tb_time_stats;
diff --git a/tools/perf/bench/futex-hash.c b/tools/perf/bench/futex-hash.c
index b65373ce5c4f..fcdea3e44937 100644
--- a/tools/perf/bench/futex-hash.c
+++ b/tools/perf/bench/futex-hash.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/zalloc.h>
 #include <sys/time.h>
+#include <sys/mman.h>
 #include <perf/cpumap.h>
 
 #include "../util/stat.h"
@@ -29,11 +30,7 @@
 
 #include <err.h>
 
-static unsigned int nthreads = 0;
-static unsigned int nsecs    = 10;
-/* amount of futexes per thread */
-static unsigned int nfutexes = 1024;
-static bool fshared = false, done = false, silent = false;
+static bool done = false;
 static int futex_flag = 0;
 
 struct timeval bench__start, bench__end, bench__runtime;
@@ -49,12 +46,18 @@ struct worker {
 	unsigned long ops;
 };
 
+static struct bench_futex_parameters params = {
+	.nfutexes = 1024,
+	.runtime  = 10,
+};
+
 static const struct option options[] = {
-	OPT_UINTEGER('t', "threads", &nthreads, "Specify amount of threads"),
-	OPT_UINTEGER('r', "runtime", &nsecs,    "Specify runtime (in seconds)"),
-	OPT_UINTEGER('f', "futexes", &nfutexes, "Specify amount of futexes per threads"),
-	OPT_BOOLEAN( 's', "silent",  &silent,   "Silent mode: do not display data/details"),
-	OPT_BOOLEAN( 'S', "shared",  &fshared,  "Use shared futexes instead of private ones"),
+	OPT_UINTEGER('t', "threads", &params.nthreads, "Specify amount of threads"),
+	OPT_UINTEGER('r', "runtime", &params.runtime, "Specify runtime (in seconds)"),
+	OPT_UINTEGER('f', "futexes", &params.nfutexes, "Specify amount of futexes per threads"),
+	OPT_BOOLEAN( 's', "silent",  &params.silent, "Silent mode: do not display data/details"),
+	OPT_BOOLEAN( 'S', "shared",  &params.fshared, "Use shared futexes instead of private ones"),
+	OPT_BOOLEAN( 'm', "mlockall", &params.mlockall, "Lock all current and future memory"),
 	OPT_END()
 };
 
@@ -78,7 +81,7 @@ static void *workerfn(void *arg)
 	pthread_mutex_unlock(&thread_lock);
 
 	do {
-		for (i = 0; i < nfutexes; i++, ops++) {
+		for (i = 0; i < params.nfutexes; i++, ops++) {
 			/*
 			 * We want the futex calls to fail in order to stress
 			 * the hashing of uaddr and not measure other steps,
@@ -86,7 +89,7 @@ static void *workerfn(void *arg)
 			 * the critical region protected by hb->lock.
 			 */
 			ret = futex_wait(&w->futex[i], 1234, NULL, futex_flag);
-			if (!silent &&
+			if (!params.silent &&
 			    (!ret || errno != EAGAIN || errno != EWOULDBLOCK))
 				warn("Non-expected futex return call");
 		}
@@ -112,7 +115,7 @@ static void print_summary(void)
 	double stddev = stddev_stats(&throughput_stats);
 
 	printf("%sAveraged %ld operations/sec (+- %.2f%%), total secs = %d\n",
-	       !silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
+	       !params.silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
 	       (int)bench__runtime.tv_sec);
 }
 
@@ -141,30 +144,35 @@ int bench_futex_hash(int argc, const char **argv)
 	act.sa_sigaction = toggle_done;
 	sigaction(SIGINT, &act, NULL);
 
-	if (!nthreads) /* default to the number of CPUs */
-		nthreads = cpu->nr;
+	if (params.mlockall) {
+		if (mlockall(MCL_CURRENT | MCL_FUTURE))
+			err(EXIT_FAILURE, "mlockall");
+	}
+
+	if (!params.nthreads) /* default to the number of CPUs */
+		params.nthreads = cpu->nr;
 
-	worker = calloc(nthreads, sizeof(*worker));
+	worker = calloc(params.nthreads, sizeof(*worker));
 	if (!worker)
 		goto errmem;
 
-	if (!fshared)
+	if (!params.fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
 	printf("Run summary [PID %d]: %d threads, each operating on %d [%s] futexes for %d secs.\n\n",
-	       getpid(), nthreads, nfutexes, fshared ? "shared":"private", nsecs);
+	       getpid(), params.nthreads, params.nfutexes, params.fshared ? "shared":"private", params.runtime);
 
 	init_stats(&throughput_stats);
 	pthread_mutex_init(&thread_lock, NULL);
 	pthread_cond_init(&thread_parent, NULL);
 	pthread_cond_init(&thread_worker, NULL);
 
-	threads_starting = nthreads;
+	threads_starting = params.nthreads;
 	pthread_attr_init(&thread_attr);
 	gettimeofday(&bench__start, NULL);
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		worker[i].tid = i;
-		worker[i].futex = calloc(nfutexes, sizeof(*worker[i].futex));
+		worker[i].futex = calloc(params.nfutexes, sizeof(*worker[i].futex));
 		if (!worker[i].futex)
 			goto errmem;
 
@@ -189,10 +197,10 @@ int bench_futex_hash(int argc, const char **argv)
 	pthread_cond_broadcast(&thread_worker);
 	pthread_mutex_unlock(&thread_lock);
 
-	sleep(nsecs);
+	sleep(params.runtime);
 	toggle_done(0, NULL, NULL);
 
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		ret = pthread_join(worker[i].thread, NULL);
 		if (ret)
 			err(EXIT_FAILURE, "pthread_join");
@@ -203,18 +211,18 @@ int bench_futex_hash(int argc, const char **argv)
 	pthread_cond_destroy(&thread_worker);
 	pthread_mutex_destroy(&thread_lock);
 
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		unsigned long t = bench__runtime.tv_sec > 0 ?
 			worker[i].ops / bench__runtime.tv_sec : 0;
 		update_stats(&throughput_stats, t);
-		if (!silent) {
-			if (nfutexes == 1)
+		if (!params.silent) {
+			if (params.nfutexes == 1)
 				printf("[thread %2d] futex: %p [ %ld ops/sec ]\n",
 				       worker[i].tid, &worker[i].futex[0], t);
 			else
 				printf("[thread %2d] futexes: %p ... %p [ %ld ops/sec ]\n",
 				       worker[i].tid, &worker[i].futex[0],
-				       &worker[i].futex[nfutexes-1], t);
+				       &worker[i].futex[params.nfutexes-1], t);
 		}
 
 		zfree(&worker[i].futex);
diff --git a/tools/perf/bench/futex-lock-pi.c b/tools/perf/bench/futex-lock-pi.c
index 89c6d160379c..5d1fe9c35807 100644
--- a/tools/perf/bench/futex-lock-pi.c
+++ b/tools/perf/bench/futex-lock-pi.c
@@ -21,6 +21,7 @@
 #include <err.h>
 #include <stdlib.h>
 #include <sys/time.h>
+#include <sys/mman.h>
 
 struct worker {
 	int tid;
@@ -31,22 +32,24 @@ struct worker {
 
 static u_int32_t global_futex = 0;
 static struct worker *worker;
-static unsigned int nsecs = 10;
-static bool silent = false, multi = false;
-static bool done = false, fshared = false;
-static unsigned int nthreads = 0;
+static bool done = false;
 static int futex_flag = 0;
 static pthread_mutex_t thread_lock;
 static unsigned int threads_starting;
 static struct stats throughput_stats;
 static pthread_cond_t thread_parent, thread_worker;
 
+static struct bench_futex_parameters params = {
+	.runtime  = 10,
+};
+
 static const struct option options[] = {
-	OPT_UINTEGER('t', "threads",  &nthreads, "Specify amount of threads"),
-	OPT_UINTEGER('r', "runtime", &nsecs,     "Specify runtime (in seconds)"),
-	OPT_BOOLEAN( 'M', "multi",   &multi,     "Use multiple futexes"),
-	OPT_BOOLEAN( 's', "silent",  &silent,    "Silent mode: do not display data/details"),
-	OPT_BOOLEAN( 'S', "shared",  &fshared,   "Use shared futexes instead of private ones"),
+	OPT_UINTEGER('t', "threads", &params.nthreads, "Specify amount of threads"),
+	OPT_UINTEGER('r', "runtime", &params.runtime, "Specify runtime (in seconds)"),
+	OPT_BOOLEAN( 'M', "multi",   &params.multi, "Use multiple futexes"),
+	OPT_BOOLEAN( 's', "silent",  &params.silent, "Silent mode: do not display data/details"),
+	OPT_BOOLEAN( 'S', "shared",  &params.fshared, "Use shared futexes instead of private ones"),
+	OPT_BOOLEAN( 'm', "mlockall", &params.mlockall, "Lock all current and future memory"),
 	OPT_END()
 };
 
@@ -61,7 +64,7 @@ static void print_summary(void)
 	double stddev = stddev_stats(&throughput_stats);
 
 	printf("%sAveraged %ld operations/sec (+- %.2f%%), total secs = %d\n",
-	       !silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
+	       !params.silent ? "\n" : "", avg, rel_stddev_stats(stddev, avg),
 	       (int)bench__runtime.tv_sec);
 }
 
@@ -93,7 +96,7 @@ static void *workerfn(void *arg)
 		ret = futex_lock_pi(w->futex, NULL, futex_flag);
 
 		if (ret) { /* handle lock acquisition */
-			if (!silent)
+			if (!params.silent)
 				warn("thread %d: Could not lock pi-lock for %p (%d)",
 				     w->tid, w->futex, ret);
 			if (done)
@@ -104,7 +107,7 @@ static void *workerfn(void *arg)
 
 		usleep(1);
 		ret = futex_unlock_pi(w->futex, futex_flag);
-		if (ret && !silent)
+		if (ret && !params.silent)
 			warn("thread %d: Could not unlock pi-lock for %p (%d)",
 			     w->tid, w->futex, ret);
 		ops++; /* account for thread's share of work */
@@ -120,12 +123,12 @@ static void create_threads(struct worker *w, pthread_attr_t thread_attr,
 	cpu_set_t cpuset;
 	unsigned int i;
 
-	threads_starting = nthreads;
+	threads_starting = params.nthreads;
 
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		worker[i].tid = i;
 
-		if (multi) {
+		if (params.multi) {
 			worker[i].futex = calloc(1, sizeof(u_int32_t));
 			if (!worker[i].futex)
 				err(EXIT_FAILURE, "calloc");
@@ -164,25 +167,30 @@ int bench_futex_lock_pi(int argc, const char **argv)
 	act.sa_sigaction = toggle_done;
 	sigaction(SIGINT, &act, NULL);
 
-	if (!nthreads)
-		nthreads = cpu->nr;
+	if (params.mlockall) {
+		if (mlockall(MCL_CURRENT | MCL_FUTURE))
+			err(EXIT_FAILURE, "mlockall");
+	}
+
+	if (!params.nthreads)
+		params.nthreads = cpu->nr;
 
-	worker = calloc(nthreads, sizeof(*worker));
+	worker = calloc(params.nthreads, sizeof(*worker));
 	if (!worker)
 		err(EXIT_FAILURE, "calloc");
 
-	if (!fshared)
+	if (!params.fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
 	printf("Run summary [PID %d]: %d threads doing pi lock/unlock pairing for %d secs.\n\n",
-	       getpid(), nthreads, nsecs);
+	       getpid(), params.nthreads, params.runtime);
 
 	init_stats(&throughput_stats);
 	pthread_mutex_init(&thread_lock, NULL);
 	pthread_cond_init(&thread_parent, NULL);
 	pthread_cond_init(&thread_worker, NULL);
 
-	threads_starting = nthreads;
+	threads_starting = params.nthreads;
 	pthread_attr_init(&thread_attr);
 	gettimeofday(&bench__start, NULL);
 
@@ -195,10 +203,10 @@ int bench_futex_lock_pi(int argc, const char **argv)
 	pthread_cond_broadcast(&thread_worker);
 	pthread_mutex_unlock(&thread_lock);
 
-	sleep(nsecs);
+	sleep(params.runtime);
 	toggle_done(0, NULL, NULL);
 
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		ret = pthread_join(worker[i].thread, NULL);
 		if (ret)
 			err(EXIT_FAILURE, "pthread_join");
@@ -209,16 +217,16 @@ int bench_futex_lock_pi(int argc, const char **argv)
 	pthread_cond_destroy(&thread_worker);
 	pthread_mutex_destroy(&thread_lock);
 
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		unsigned long t = bench__runtime.tv_sec > 0 ?
 			worker[i].ops / bench__runtime.tv_sec : 0;
 
 		update_stats(&throughput_stats, t);
-		if (!silent)
+		if (!params.silent)
 			printf("[thread %3d] futex: %p [ %ld ops/sec ]\n",
 			       worker[i].tid, worker[i].futex, t);
 
-		if (multi)
+		if (params.multi)
 			zfree(&worker[i].futex);
 	}
 
diff --git a/tools/perf/bench/futex-requeue.c b/tools/perf/bench/futex-requeue.c
index 5fa23295ee5f..97fe31fd3a23 100644
--- a/tools/perf/bench/futex-requeue.c
+++ b/tools/perf/bench/futex-requeue.c
@@ -6,7 +6,8 @@
  *                on futex2, N at a time.
  *
  * This program is particularly useful to measure the latency of nthread
- * requeues without waking up any tasks -- thus mimicking a regular futex_wait.
+ * requeues without waking up any tasks (in the non-pi case) -- thus
+ * mimicking a regular futex_wait.
  */
 
 /* For the CLR_() macros */
@@ -27,28 +28,35 @@
 #include <err.h>
 #include <stdlib.h>
 #include <sys/time.h>
+#include <sys/mman.h>
 
 static u_int32_t futex1 = 0, futex2 = 0;
 
-/*
- * How many tasks to requeue at a time.
- * Default to 1 in order to make the kernel work more.
- */
-static unsigned int nrequeue = 1;
-
 static pthread_t *worker;
-static bool done = false, silent = false, fshared = false;
+static bool done = false;
 static pthread_mutex_t thread_lock;
 static pthread_cond_t thread_parent, thread_worker;
 static struct stats requeuetime_stats, requeued_stats;
-static unsigned int threads_starting, nthreads = 0;
+static unsigned int threads_starting;
 static int futex_flag = 0;
 
+static struct bench_futex_parameters params = {
+	/*
+	 * How many tasks to requeue at a time.
+	 * Default to 1 in order to make the kernel work more.
+	 */
+	.nrequeue = 1,
+};
+
 static const struct option options[] = {
-	OPT_UINTEGER('t', "threads",  &nthreads, "Specify amount of threads"),
-	OPT_UINTEGER('q', "nrequeue", &nrequeue, "Specify amount of threads to requeue at once"),
-	OPT_BOOLEAN( 's', "silent",   &silent,   "Silent mode: do not display data/details"),
-	OPT_BOOLEAN( 'S', "shared",   &fshared,  "Use shared futexes instead of private ones"),
+	OPT_UINTEGER('t', "threads",  &params.nthreads, "Specify amount of threads"),
+	OPT_UINTEGER('q', "nrequeue", &params.nrequeue, "Specify amount of threads to requeue at once"),
+	OPT_BOOLEAN( 's', "silent",   &params.silent, "Silent mode: do not display data/details"),
+	OPT_BOOLEAN( 'S', "shared",   &params.fshared, "Use shared futexes instead of private ones"),
+	OPT_BOOLEAN( 'm', "mlockall", &params.mlockall, "Lock all current and future memory"),
+	OPT_BOOLEAN( 'B', "broadcast", &params.broadcast, "Requeue all threads at once"),
+	OPT_BOOLEAN( 'p', "pi", &params.pi, "Use PI-aware variants of FUTEX_CMP_REQUEUE"),
+
 	OPT_END()
 };
 
@@ -65,13 +73,15 @@ static void print_summary(void)
 
 	printf("Requeued %d of %d threads in %.4f ms (+-%.2f%%)\n",
 	       requeued_avg,
-	       nthreads,
+	       params.nthreads,
 	       requeuetime_avg / USEC_PER_MSEC,
 	       rel_stddev_stats(requeuetime_stddev, requeuetime_avg));
 }
 
 static void *workerfn(void *arg __maybe_unused)
 {
+	int ret;
+
 	pthread_mutex_lock(&thread_lock);
 	threads_starting--;
 	if (!threads_starting)
@@ -79,7 +89,34 @@ static void *workerfn(void *arg __maybe_unused)
 	pthread_cond_wait(&thread_worker, &thread_lock);
 	pthread_mutex_unlock(&thread_lock);
 
-	futex_wait(&futex1, 0, NULL, futex_flag);
+	while (1) {
+		if (!params.pi) {
+			ret = futex_wait(&futex1, 0, NULL, futex_flag);
+			if (!ret)
+				break;
+
+			if (ret && errno != EAGAIN) {
+				if (!params.silent)
+					warnx("futex_wait");
+				break;
+			}
+		} else {
+			ret = futex_wait_requeue_pi(&futex1, 0, &futex2,
+						    NULL, futex_flag);
+			if (!ret) {
+				/* got the lock at futex2 */
+				futex_unlock_pi(&futex2, futex_flag);
+				break;
+			}
+
+			if (ret && errno != EAGAIN) {
+				if (!params.silent)
+					warnx("futex_wait_requeue_pi");
+				break;
+			}
+		}
+	}
+
 	return NULL;
 }
 
@@ -89,10 +126,10 @@ static void block_threads(pthread_t *w,
 	cpu_set_t cpuset;
 	unsigned int i;
 
-	threads_starting = nthreads;
+	threads_starting = params.nthreads;
 
 	/* create and block all threads */
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		CPU_ZERO(&cpuset);
 		CPU_SET(cpu->map[i % cpu->nr], &cpuset);
 
@@ -132,22 +169,31 @@ int bench_futex_requeue(int argc, const char **argv)
 	act.sa_sigaction = toggle_done;
 	sigaction(SIGINT, &act, NULL);
 
-	if (!nthreads)
-		nthreads = cpu->nr;
+	if (params.mlockall) {
+		if (mlockall(MCL_CURRENT | MCL_FUTURE))
+			err(EXIT_FAILURE, "mlockall");
+	}
+
+	if (!params.nthreads)
+		params.nthreads = cpu->nr;
 
-	worker = calloc(nthreads, sizeof(*worker));
+	worker = calloc(params.nthreads, sizeof(*worker));
 	if (!worker)
 		err(EXIT_FAILURE, "calloc");
 
-	if (!fshared)
+	if (!params.fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
-	if (nrequeue > nthreads)
-		nrequeue = nthreads;
+	if (params.nrequeue > params.nthreads)
+		params.nrequeue = params.nthreads;
 
-	printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %p), "
-	       "%d at a time.\n\n",  getpid(), nthreads,
-	       fshared ? "shared":"private", &futex1, &futex2, nrequeue);
+	if (params.broadcast)
+		params.nrequeue = params.nthreads;
+
+	printf("Run summary [PID %d]: Requeuing %d threads (from [%s] %p to %s%p), "
+	       "%d at a time.\n\n",  getpid(), params.nthreads,
+	       params.fshared ? "shared":"private", &futex1,
+	       params.pi ? "PI ": "", &futex2, params.nrequeue);
 
 	init_stats(&requeued_stats);
 	init_stats(&requeuetime_stats);
@@ -157,7 +203,7 @@ int bench_futex_requeue(int argc, const char **argv)
 	pthread_cond_init(&thread_worker, NULL);
 
 	for (j = 0; j < bench_repeat && !done; j++) {
-		unsigned int nrequeued = 0;
+		unsigned int nrequeued = 0, wakeups = 0;
 		struct timeval start, end, runtime;
 
 		/* create, launch & block all threads */
@@ -174,13 +220,31 @@ int bench_futex_requeue(int argc, const char **argv)
 
 		/* Ok, all threads are patiently blocked, start requeueing */
 		gettimeofday(&start, NULL);
-		while (nrequeued < nthreads) {
+		while (nrequeued < params.nthreads) {
+			int r;
+
 			/*
-			 * Do not wakeup any tasks blocked on futex1, allowing
-			 * us to really measure futex_wait functionality.
+			 * For the regular non-pi case, do not wakeup any tasks
+			 * blocked on futex1, allowing us to really measure
+			 * futex_wait functionality. For the PI case the first
+			 * waiter is always awoken.
 			 */
-			nrequeued += futex_cmp_requeue(&futex1, 0, &futex2, 0,
-						       nrequeue, futex_flag);
+			if (!params.pi) {
+				r = futex_cmp_requeue(&futex1, 0, &futex2, 0,
+						      params.nrequeue,
+						      futex_flag);
+			} else {
+				r = futex_cmp_requeue_pi(&futex1, 0, &futex2,
+							 params.nrequeue,
+							 futex_flag);
+				wakeups++; /* assume no error */
+			}
+
+			if (r < 0)
+				err(EXIT_FAILURE, "couldn't requeue from %p to %p",
+				    &futex1, &futex2);
+
+			nrequeued += r;
 		}
 
 		gettimeofday(&end, NULL);
@@ -189,17 +253,32 @@ int bench_futex_requeue(int argc, const char **argv)
 		update_stats(&requeued_stats, nrequeued);
 		update_stats(&requeuetime_stats, runtime.tv_usec);
 
-		if (!silent) {
-			printf("[Run %d]: Requeued %d of %d threads in %.4f ms\n",
-			       j + 1, nrequeued, nthreads, runtime.tv_usec / (double)USEC_PER_MSEC);
+		if (!params.silent) {
+			if (!params.pi)
+				printf("[Run %d]: Requeued %d of %d threads in "
+				       "%.4f ms\n", j + 1, nrequeued,
+				       params.nthreads,
+				       runtime.tv_usec / (double)USEC_PER_MSEC);
+			else {
+				nrequeued -= wakeups;
+				printf("[Run %d]: Awoke and Requeued (%d+%d) of "
+				       "%d threads in %.4f ms\n",
+				       j + 1, wakeups, nrequeued,
+				       params.nthreads,
+				       runtime.tv_usec / (double)USEC_PER_MSEC);
+			}
+
 		}
 
-		/* everybody should be blocked on futex2, wake'em up */
-		nrequeued = futex_wake(&futex2, nrequeued, futex_flag);
-		if (nthreads != nrequeued)
-			warnx("couldn't wakeup all tasks (%d/%d)", nrequeued, nthreads);
+		if (!params.pi) {
+			/* everybody should be blocked on futex2, wake'em up */
+			nrequeued = futex_wake(&futex2, nrequeued, futex_flag);
+			if (params.nthreads != nrequeued)
+				warnx("couldn't wakeup all tasks (%d/%d)",
+				      nrequeued, params.nthreads);
+		}
 
-		for (i = 0; i < nthreads; i++) {
+		for (i = 0; i < params.nthreads; i++) {
 			ret = pthread_join(worker[i], NULL);
 			if (ret)
 				err(EXIT_FAILURE, "pthread_join");
diff --git a/tools/perf/bench/futex-wake-parallel.c b/tools/perf/bench/futex-wake-parallel.c
index 6e6f5247e1fe..e970e6b9ad53 100644
--- a/tools/perf/bench/futex-wake-parallel.c
+++ b/tools/perf/bench/futex-wake-parallel.c
@@ -34,6 +34,7 @@ int bench_futex_wake_parallel(int argc __maybe_unused, const char **argv __maybe
 #include <err.h>
 #include <stdlib.h>
 #include <sys/time.h>
+#include <sys/mman.h>
 
 struct thread_data {
 	pthread_t worker;
@@ -47,8 +48,7 @@ static unsigned int nwakes = 1;
 static u_int32_t futex = 0;
 
 static pthread_t *blocked_worker;
-static bool done = false, silent = false, fshared = false;
-static unsigned int nblocked_threads = 0, nwaking_threads = 0;
+static bool done = false;
 static pthread_mutex_t thread_lock;
 static pthread_cond_t thread_parent, thread_worker;
 static pthread_barrier_t barrier;
@@ -56,11 +56,15 @@ static struct stats waketime_stats, wakeup_stats;
 static unsigned int threads_starting;
 static int futex_flag = 0;
 
+static struct bench_futex_parameters params;
+
 static const struct option options[] = {
-	OPT_UINTEGER('t', "threads", &nblocked_threads, "Specify amount of threads"),
-	OPT_UINTEGER('w', "nwakers", &nwaking_threads, "Specify amount of waking threads"),
-	OPT_BOOLEAN( 's', "silent",  &silent,   "Silent mode: do not display data/details"),
-	OPT_BOOLEAN( 'S', "shared",  &fshared,  "Use shared futexes instead of private ones"),
+	OPT_UINTEGER('t', "threads", &params.nthreads, "Specify amount of threads"),
+	OPT_UINTEGER('w', "nwakers", &params.nwakes, "Specify amount of waking threads"),
+	OPT_BOOLEAN( 's', "silent",  &params.silent, "Silent mode: do not display data/details"),
+	OPT_BOOLEAN( 'S', "shared",  &params.fshared, "Use shared futexes instead of private ones"),
+	OPT_BOOLEAN( 'm', "mlockall", &params.mlockall, "Lock all current and future memory"),
+
 	OPT_END()
 };
 
@@ -96,10 +100,10 @@ static void wakeup_threads(struct thread_data *td, pthread_attr_t thread_attr)
 
 	pthread_attr_setdetachstate(&thread_attr, PTHREAD_CREATE_JOINABLE);
 
-	pthread_barrier_init(&barrier, NULL, nwaking_threads + 1);
+	pthread_barrier_init(&barrier, NULL, params.nwakes + 1);
 
 	/* create and block all threads */
-	for (i = 0; i < nwaking_threads; i++) {
+	for (i = 0; i < params.nwakes; i++) {
 		/*
 		 * Thread creation order will impact per-thread latency
 		 * as it will affect the order to acquire the hb spinlock.
@@ -112,7 +116,7 @@ static void wakeup_threads(struct thread_data *td, pthread_attr_t thread_attr)
 
 	pthread_barrier_wait(&barrier);
 
-	for (i = 0; i < nwaking_threads; i++)
+	for (i = 0; i < params.nwakes; i++)
 		if (pthread_join(td[i].worker, NULL))
 			err(EXIT_FAILURE, "pthread_join");
 
@@ -143,10 +147,10 @@ static void block_threads(pthread_t *w, pthread_attr_t thread_attr,
 	cpu_set_t cpuset;
 	unsigned int i;
 
-	threads_starting = nblocked_threads;
+	threads_starting = params.nthreads;
 
 	/* create and block all threads */
-	for (i = 0; i < nblocked_threads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		CPU_ZERO(&cpuset);
 		CPU_SET(cpu->map[i % cpu->nr], &cpuset);
 
@@ -167,7 +171,7 @@ static void print_run(struct thread_data *waking_worker, unsigned int run_num)
 	init_stats(&__wakeup_stats);
 	init_stats(&__waketime_stats);
 
-	for (i = 0; i < nwaking_threads; i++) {
+	for (i = 0; i < params.nwakes; i++) {
 		update_stats(&__waketime_stats, waking_worker[i].runtime.tv_usec);
 		update_stats(&__wakeup_stats, waking_worker[i].nwoken);
 	}
@@ -178,7 +182,7 @@ static void print_run(struct thread_data *waking_worker, unsigned int run_num)
 
 	printf("[Run %d]: Avg per-thread latency (waking %d/%d threads) "
 	       "in %.4f ms (+-%.2f%%)\n", run_num + 1, wakeup_avg,
-	       nblocked_threads, waketime_avg / USEC_PER_MSEC,
+	       params.nthreads, waketime_avg / USEC_PER_MSEC,
 	       rel_stddev_stats(waketime_stddev, waketime_avg));
 }
 
@@ -193,7 +197,7 @@ static void print_summary(void)
 
 	printf("Avg per-thread latency (waking %d/%d threads) in %.4f ms (+-%.2f%%)\n",
 	       wakeup_avg,
-	       nblocked_threads,
+	       params.nthreads,
 	       waketime_avg / USEC_PER_MSEC,
 	       rel_stddev_stats(waketime_stddev, waketime_avg));
 }
@@ -203,7 +207,7 @@ static void do_run_stats(struct thread_data *waking_worker)
 {
 	unsigned int i;
 
-	for (i = 0; i < nwaking_threads; i++) {
+	for (i = 0; i < params.nwakes; i++) {
 		update_stats(&waketime_stats, waking_worker[i].runtime.tv_usec);
 		update_stats(&wakeup_stats, waking_worker[i].nwoken);
 	}
@@ -238,36 +242,42 @@ int bench_futex_wake_parallel(int argc, const char **argv)
 	act.sa_sigaction = toggle_done;
 	sigaction(SIGINT, &act, NULL);
 
+	if (params.mlockall) {
+		if (mlockall(MCL_CURRENT | MCL_FUTURE))
+			err(EXIT_FAILURE, "mlockall");
+	}
+
 	cpu = perf_cpu_map__new(NULL);
 	if (!cpu)
 		err(EXIT_FAILURE, "calloc");
 
-	if (!nblocked_threads)
-		nblocked_threads = cpu->nr;
+	if (!params.nthreads)
+		params.nthreads = cpu->nr;
 
 	/* some sanity checks */
-	if (nwaking_threads > nblocked_threads || !nwaking_threads)
-		nwaking_threads = nblocked_threads;
+	if (params.nwakes > params.nthreads ||
+	    !params.nwakes)
+		params.nwakes = params.nthreads;
 
-	if (nblocked_threads % nwaking_threads)
+	if (params.nthreads % params.nwakes)
 		errx(EXIT_FAILURE, "Must be perfectly divisible");
 	/*
 	 * Each thread will wakeup nwakes tasks in
 	 * a single futex_wait call.
 	 */
-	nwakes = nblocked_threads/nwaking_threads;
+	nwakes = params.nthreads/params.nwakes;
 
-	blocked_worker = calloc(nblocked_threads, sizeof(*blocked_worker));
+	blocked_worker = calloc(params.nthreads, sizeof(*blocked_worker));
 	if (!blocked_worker)
 		err(EXIT_FAILURE, "calloc");
 
-	if (!fshared)
+	if (!params.fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
 	printf("Run summary [PID %d]: blocking on %d threads (at [%s] "
 	       "futex %p), %d threads waking up %d at a time.\n\n",
-	       getpid(), nblocked_threads, fshared ? "shared":"private",
-	       &futex, nwaking_threads, nwakes);
+	       getpid(), params.nthreads, params.fshared ? "shared":"private",
+	       &futex, params.nwakes, nwakes);
 
 	init_stats(&wakeup_stats);
 	init_stats(&waketime_stats);
@@ -278,7 +288,7 @@ int bench_futex_wake_parallel(int argc, const char **argv)
 	pthread_cond_init(&thread_worker, NULL);
 
 	for (j = 0; j < bench_repeat && !done; j++) {
-		waking_worker = calloc(nwaking_threads, sizeof(*waking_worker));
+		waking_worker = calloc(params.nwakes, sizeof(*waking_worker));
 		if (!waking_worker)
 			err(EXIT_FAILURE, "calloc");
 
@@ -297,14 +307,14 @@ int bench_futex_wake_parallel(int argc, const char **argv)
 		/* Ok, all threads are patiently blocked, start waking folks up */
 		wakeup_threads(waking_worker, thread_attr);
 
-		for (i = 0; i < nblocked_threads; i++) {
+		for (i = 0; i < params.nthreads; i++) {
 			ret = pthread_join(blocked_worker[i], NULL);
 			if (ret)
 				err(EXIT_FAILURE, "pthread_join");
 		}
 
 		do_run_stats(waking_worker);
-		if (!silent)
+		if (!params.silent)
 			print_run(waking_worker, j);
 
 		free(waking_worker);
diff --git a/tools/perf/bench/futex-wake.c b/tools/perf/bench/futex-wake.c
index 6d217868f53c..77f058a47790 100644
--- a/tools/perf/bench/futex-wake.c
+++ b/tools/perf/bench/futex-wake.c
@@ -27,29 +27,34 @@
 #include <err.h>
 #include <stdlib.h>
 #include <sys/time.h>
+#include <sys/mman.h>
 
 /* all threads will block on the same futex */
 static u_int32_t futex1 = 0;
 
-/*
- * How many wakeups to do at a time.
- * Default to 1 in order to make the kernel work more.
- */
-static unsigned int nwakes = 1;
-
-pthread_t *worker;
-static bool done = false, silent = false, fshared = false;
+static pthread_t *worker;
+static bool done = false;
 static pthread_mutex_t thread_lock;
 static pthread_cond_t thread_parent, thread_worker;
 static struct stats waketime_stats, wakeup_stats;
-static unsigned int threads_starting, nthreads = 0;
+static unsigned int threads_starting;
 static int futex_flag = 0;
 
+static struct bench_futex_parameters params = {
+	/*
+	 * How many wakeups to do at a time.
+	 * Default to 1 in order to make the kernel work more.
+	 */
+	.nwakes  = 1,
+};
+
 static const struct option options[] = {
-	OPT_UINTEGER('t', "threads", &nthreads, "Specify amount of threads"),
-	OPT_UINTEGER('w', "nwakes",  &nwakes,   "Specify amount of threads to wake at once"),
-	OPT_BOOLEAN( 's', "silent",  &silent,   "Silent mode: do not display data/details"),
-	OPT_BOOLEAN( 'S', "shared",  &fshared,  "Use shared futexes instead of private ones"),
+	OPT_UINTEGER('t', "threads", &params.nthreads, "Specify amount of threads"),
+	OPT_UINTEGER('w', "nwakes",  &params.nwakes, "Specify amount of threads to wake at once"),
+	OPT_BOOLEAN( 's', "silent",  &params.silent, "Silent mode: do not display data/details"),
+	OPT_BOOLEAN( 'S', "shared",  &params.fshared, "Use shared futexes instead of private ones"),
+	OPT_BOOLEAN( 'm', "mlockall", &params.mlockall, "Lock all current and future memory"),
+
 	OPT_END()
 };
 
@@ -84,7 +89,7 @@ static void print_summary(void)
 
 	printf("Wokeup %d of %d threads in %.4f ms (+-%.2f%%)\n",
 	       wakeup_avg,
-	       nthreads,
+	       params.nthreads,
 	       waketime_avg / USEC_PER_MSEC,
 	       rel_stddev_stats(waketime_stddev, waketime_avg));
 }
@@ -95,10 +100,10 @@ static void block_threads(pthread_t *w,
 	cpu_set_t cpuset;
 	unsigned int i;
 
-	threads_starting = nthreads;
+	threads_starting = params.nthreads;
 
 	/* create and block all threads */
-	for (i = 0; i < nthreads; i++) {
+	for (i = 0; i < params.nthreads; i++) {
 		CPU_ZERO(&cpuset);
 		CPU_SET(cpu->map[i % cpu->nr], &cpuset);
 
@@ -140,19 +145,25 @@ int bench_futex_wake(int argc, const char **argv)
 	act.sa_sigaction = toggle_done;
 	sigaction(SIGINT, &act, NULL);
 
-	if (!nthreads)
-		nthreads = cpu->nr;
+	if (params.mlockall) {
+		if (mlockall(MCL_CURRENT | MCL_FUTURE))
+			err(EXIT_FAILURE, "mlockall");
+	}
+
+	if (!params.nthreads)
+		params.nthreads = cpu->nr;
 
-	worker = calloc(nthreads, sizeof(*worker));
+	worker = calloc(params.nthreads, sizeof(*worker));
 	if (!worker)
 		err(EXIT_FAILURE, "calloc");
 
-	if (!fshared)
+	if (!params.fshared)
 		futex_flag = FUTEX_PRIVATE_FLAG;
 
 	printf("Run summary [PID %d]: blocking on %d threads (at [%s] futex %p), "
 	       "waking up %d at a time.\n\n",
-	       getpid(), nthreads, fshared ? "shared":"private",  &futex1, nwakes);
+	       getpid(), params.nthreads, params.fshared ? "shared":"private",
+	       &futex1, params.nwakes);
 
 	init_stats(&wakeup_stats);
 	init_stats(&waketime_stats);
@@ -179,20 +190,22 @@ int bench_futex_wake(int argc, const char **argv)
 
 		/* Ok, all threads are patiently blocked, start waking folks up */
 		gettimeofday(&start, NULL);
-		while (nwoken != nthreads)
-			nwoken += futex_wake(&futex1, nwakes, futex_flag);
+		while (nwoken != params.nthreads)
+			nwoken += futex_wake(&futex1,
+					     params.nwakes, futex_flag);
 		gettimeofday(&end, NULL);
 		timersub(&end, &start, &runtime);
 
 		update_stats(&wakeup_stats, nwoken);
 		update_stats(&waketime_stats, runtime.tv_usec);
 
-		if (!silent) {
+		if (!params.silent) {
 			printf("[Run %d]: Wokeup %d of %d threads in %.4f ms\n",
-			       j + 1, nwoken, nthreads, runtime.tv_usec / (double)USEC_PER_MSEC);
+			       j + 1, nwoken, params.nthreads,
+			       runtime.tv_usec / (double)USEC_PER_MSEC);
 		}
 
-		for (i = 0; i < nthreads; i++) {
+		for (i = 0; i < params.nthreads; i++) {
 			ret = pthread_join(worker[i], NULL);
 			if (ret)
 				err(EXIT_FAILURE, "pthread_join");
diff --git a/tools/perf/bench/futex.h b/tools/perf/bench/futex.h
index 31b53cc7d5bc..b3853aac3021 100644
--- a/tools/perf/bench/futex.h
+++ b/tools/perf/bench/futex.h
@@ -13,6 +13,20 @@
 #include <sys/types.h>
 #include <linux/futex.h>
 
+struct bench_futex_parameters {
+	bool silent;
+	bool fshared;
+	bool mlockall;
+	bool multi; /* lock-pi */
+	bool pi; /* requeue-pi */
+	bool broadcast; /* requeue */
+	unsigned int runtime; /* seconds*/
+	unsigned int nthreads;
+	unsigned int nfutexes;
+	unsigned int nwakes;
+	unsigned int nrequeue;
+};
+
 /**
  * futex() - SYS_futex syscall wrapper
  * @uaddr:	address of first futex
@@ -20,7 +34,7 @@
  * @val:	typically expected value of uaddr, but varies by op
  * @timeout:	typically an absolute struct timespec (except where noted
  *		otherwise). Overloaded by some ops
- * @uaddr2:	address of second futex for some ops\
+ * @uaddr2:	address of second futex for some ops
  * @val3:	varies by op
  * @opflags:	flags to be bitwise OR'd with op, such as FUTEX_PRIVATE_FLAG
  *
@@ -77,7 +91,7 @@ futex_unlock_pi(u_int32_t *uaddr, int opflags)
 /**
 * futex_cmp_requeue() - requeue tasks from uaddr to uaddr2
 * @nr_wake:        wake up to this many tasks
-* @nr_requeue:        requeue up to this many tasks
+* @nr_requeue:     requeue up to this many tasks
 */
 static inline int
 futex_cmp_requeue(u_int32_t *uaddr, u_int32_t val, u_int32_t *uaddr2, int nr_wake,
@@ -86,4 +100,38 @@ futex_cmp_requeue(u_int32_t *uaddr, u_int32_t val, u_int32_t *uaddr2, int nr_wak
 	return futex(uaddr, FUTEX_CMP_REQUEUE, nr_wake, nr_requeue, uaddr2,
 		 val, opflags);
 }
+
+/**
+ * futex_wait_requeue_pi() - block on uaddr and prepare to requeue to uaddr2
+ * @uaddr:	non-PI futex source
+ * @uaddr2:	PI futex target
+ *
+ * This is the first half of the requeue_pi mechanism. It shall always be
+ * paired with futex_cmp_requeue_pi().
+ */
+static inline int
+futex_wait_requeue_pi(u_int32_t *uaddr, u_int32_t val, u_int32_t *uaddr2,
+		      struct timespec *timeout, int opflags)
+{
+	return futex(uaddr, FUTEX_WAIT_REQUEUE_PI, val, timeout, uaddr2, 0,
+		     opflags);
+}
+
+/**
+ * futex_cmp_requeue_pi() - requeue tasks from uaddr to uaddr2
+ * @uaddr:	non-PI futex source
+ * @uaddr2:	PI futex target
+ * @nr_requeue:	requeue up to this many tasks
+ *
+ * This is the second half of the requeue_pi mechanism. It shall always be
+ * paired with futex_wait_requeue_pi(). The first waker is always awoken.
+ */
+static inline int
+futex_cmp_requeue_pi(u_int32_t *uaddr, u_int32_t val, u_int32_t *uaddr2,
+		     int nr_requeue, int opflags)
+{
+	return futex(uaddr, FUTEX_CMP_REQUEUE_PI, 1, nr_requeue, uaddr2,
+		     val, opflags);
+}
+
 #endif /* _FUTEX_H */
diff --git a/tools/perf/bench/inject-buildid.c b/tools/perf/bench/inject-buildid.c
index 55d373b75791..17672790f123 100644
--- a/tools/perf/bench/inject-buildid.c
+++ b/tools/perf/bench/inject-buildid.c
@@ -133,7 +133,7 @@ static u64 dso_map_addr(struct bench_dso *dso)
 	return 0x400000ULL + dso->ino * 8192ULL;
 }
 
-static u32 synthesize_attr(struct bench_data *data)
+static ssize_t synthesize_attr(struct bench_data *data)
 {
 	union perf_event event;
 
@@ -151,7 +151,7 @@ static u32 synthesize_attr(struct bench_data *data)
 	return writen(data->input_pipe[1], &event, event.header.size);
 }
 
-static u32 synthesize_fork(struct bench_data *data)
+static ssize_t synthesize_fork(struct bench_data *data)
 {
 	union perf_event event;
 
@@ -169,8 +169,7 @@ static u32 synthesize_fork(struct bench_data *data)
 	return writen(data->input_pipe[1], &event, event.header.size);
 }
 
-static u32 synthesize_mmap(struct bench_data *data, struct bench_dso *dso,
-			   u64 timestamp)
+static ssize_t synthesize_mmap(struct bench_data *data, struct bench_dso *dso, u64 timestamp)
 {
 	union perf_event event;
 	size_t len = offsetof(struct perf_record_mmap2, filename);
@@ -198,23 +197,25 @@ static u32 synthesize_mmap(struct bench_data *data, struct bench_dso *dso,
 
 	if (len > sizeof(event.mmap2)) {
 		/* write mmap2 event first */
-		writen(data->input_pipe[1], &event, len - bench_id_hdr_size);
+		if (writen(data->input_pipe[1], &event, len - bench_id_hdr_size) < 0)
+			return -1;
 		/* zero-fill sample id header */
 		memset(id_hdr_ptr, 0, bench_id_hdr_size);
 		/* put timestamp in the right position */
 		ts_idx = (bench_id_hdr_size / sizeof(u64)) - 2;
 		id_hdr_ptr[ts_idx] = timestamp;
-		writen(data->input_pipe[1], id_hdr_ptr, bench_id_hdr_size);
-	} else {
-		ts_idx = (len / sizeof(u64)) - 2;
-		id_hdr_ptr[ts_idx] = timestamp;
-		writen(data->input_pipe[1], &event, len);
+		if (writen(data->input_pipe[1], id_hdr_ptr, bench_id_hdr_size) < 0)
+			return -1;
+
+		return len;
 	}
-	return len;
+
+	ts_idx = (len / sizeof(u64)) - 2;
+	id_hdr_ptr[ts_idx] = timestamp;
+	return writen(data->input_pipe[1], &event, len);
 }
 
-static u32 synthesize_sample(struct bench_data *data, struct bench_dso *dso,
-			     u64 timestamp)
+static ssize_t synthesize_sample(struct bench_data *data, struct bench_dso *dso, u64 timestamp)
 {
 	union perf_event event;
 	struct perf_sample sample = {
@@ -233,7 +234,7 @@ static u32 synthesize_sample(struct bench_data *data, struct bench_dso *dso,
 	return writen(data->input_pipe[1], &event, event.header.size);
 }
 
-static u32 synthesize_flush(struct bench_data *data)
+static ssize_t synthesize_flush(struct bench_data *data)
 {
 	struct perf_event_header header = {
 		.size = sizeof(header),
@@ -348,14 +349,16 @@ static int inject_build_id(struct bench_data *data, u64 *max_rss)
 	int status;
 	unsigned int i, k;
 	struct rusage rusage;
-	u64 len = 0;
 
 	/* this makes the child to run */
 	if (perf_header__write_pipe(data->input_pipe[1]) < 0)
 		return -1;
 
-	len += synthesize_attr(data);
-	len += synthesize_fork(data);
+	if (synthesize_attr(data) < 0)
+		return -1;
+
+	if (synthesize_fork(data) < 0)
+		return -1;
 
 	for (i = 0; i < nr_mmaps; i++) {
 		int idx = rand() % (nr_dsos - 1);
@@ -363,13 +366,18 @@ static int inject_build_id(struct bench_data *data, u64 *max_rss)
 		u64 timestamp = rand() % 1000000;
 
 		pr_debug2("   [%d] injecting: %s\n", i+1, dso->name);
-		len += synthesize_mmap(data, dso, timestamp);
+		if (synthesize_mmap(data, dso, timestamp) < 0)
+			return -1;
 
-		for (k = 0; k < nr_samples; k++)
-			len += synthesize_sample(data, dso, timestamp + k * 1000);
+		for (k = 0; k < nr_samples; k++) {
+			if (synthesize_sample(data, dso, timestamp + k * 1000) < 0)
+				return -1;
+		}
 
-		if ((i + 1) % 10 == 0)
-			len += synthesize_flush(data);
+		if ((i + 1) % 10 == 0) {
+			if (synthesize_flush(data) < 0)
+				return -1;
+		}
 	}
 
 	/* this makes the child to finish */
diff --git a/tools/perf/bench/synthesize.c b/tools/perf/bench/synthesize.c
index b2924e3181dc..05f7c923c745 100644
--- a/tools/perf/bench/synthesize.c
+++ b/tools/perf/bench/synthesize.c
@@ -117,7 +117,7 @@ static int run_single_threaded(void)
 	int err;
 
 	perf_set_singlethreaded();
-	session = perf_session__new(NULL, false, NULL);
+	session = perf_session__new(NULL, NULL);
 	if (IS_ERR(session)) {
 		pr_err("Session creation failed.\n");
 		return PTR_ERR(session);
@@ -161,7 +161,7 @@ static int do_run_multi_threaded(struct target *target,
 	init_stats(&time_stats);
 	init_stats(&event_stats);
 	for (i = 0; i < multi_iterations; i++) {
-		session = perf_session__new(NULL, false, NULL);
+		session = perf_session__new(NULL, NULL);
 		if (IS_ERR(session))
 			return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-annotate.c b/tools/perf/builtin-annotate.c
index cebb861be3e3..05eb098cb0e3 100644
--- a/tools/perf/builtin-annotate.c
+++ b/tools/perf/builtin-annotate.c
@@ -596,7 +596,7 @@ int cmd_annotate(int argc, const char **argv)
 
 	data.path = input_name;
 
-	annotate.session = perf_session__new(&data, false, &annotate.tool);
+	annotate.session = perf_session__new(&data, &annotate.tool);
 	if (IS_ERR(annotate.session))
 		return PTR_ERR(annotate.session);
 
diff --git a/tools/perf/builtin-bench.c b/tools/perf/builtin-bench.c
index 62a7b7420a44..d0895162c2ba 100644
--- a/tools/perf/builtin-bench.c
+++ b/tools/perf/builtin-bench.c
@@ -88,6 +88,7 @@ static struct bench internals_benchmarks[] = {
 	{ "synthesize", "Benchmark perf event synthesis",	bench_synthesize	},
 	{ "kallsyms-parse", "Benchmark kallsyms parsing",	bench_kallsyms_parse	},
 	{ "inject-build-id", "Benchmark build-id injection",	bench_inject_build_id	},
+	{ "evlist-open-close", "Benchmark evlist open and close",	bench_evlist_open_close	},
 	{ NULL,		NULL,					NULL			}
 };
 
diff --git a/tools/perf/builtin-buildid-cache.c b/tools/perf/builtin-buildid-cache.c
index ecd0d3cb6f5c..0db3cfc04c47 100644
--- a/tools/perf/builtin-buildid-cache.c
+++ b/tools/perf/builtin-buildid-cache.c
@@ -443,7 +443,7 @@ int cmd_buildid_cache(int argc, const char **argv)
 		data.path  = missing_filename;
 		data.force = force;
 
-		session = perf_session__new(&data, false, NULL);
+		session = perf_session__new(&data, NULL);
 		if (IS_ERR(session))
 			return PTR_ERR(session);
 	}
diff --git a/tools/perf/builtin-buildid-list.c b/tools/perf/builtin-buildid-list.c
index 833405c27dae..cebadd632234 100644
--- a/tools/perf/builtin-buildid-list.c
+++ b/tools/perf/builtin-buildid-list.c
@@ -65,7 +65,7 @@ static int perf_session__list_build_ids(bool force, bool with_hits)
 	if (filename__fprintf_build_id(input_name, stdout) > 0)
 		goto out;
 
-	session = perf_session__new(&data, false, &build_id__mark_dso_hit_ops);
+	session = perf_session__new(&data, &build_id__mark_dso_hit_ops);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-c2c.c b/tools/perf/builtin-c2c.c
index 6dea37f141b2..a192014fa52b 100644
--- a/tools/perf/builtin-c2c.c
+++ b/tools/perf/builtin-c2c.c
@@ -139,11 +139,11 @@ static void *c2c_he_zalloc(size_t size)
 	if (!c2c_he)
 		return NULL;
 
-	c2c_he->cpuset = bitmap_alloc(c2c.cpus_cnt);
+	c2c_he->cpuset = bitmap_zalloc(c2c.cpus_cnt);
 	if (!c2c_he->cpuset)
 		return NULL;
 
-	c2c_he->nodeset = bitmap_alloc(c2c.nodes_cnt);
+	c2c_he->nodeset = bitmap_zalloc(c2c.nodes_cnt);
 	if (!c2c_he->nodeset)
 		return NULL;
 
@@ -2047,7 +2047,7 @@ static int setup_nodes(struct perf_session *session)
 		struct perf_cpu_map *map = n[node].map;
 		unsigned long *set;
 
-		set = bitmap_alloc(c2c.cpus_cnt);
+		set = bitmap_zalloc(c2c.cpus_cnt);
 		if (!set)
 			return -ENOMEM;
 
@@ -2790,7 +2790,7 @@ static int perf_c2c__report(int argc, const char **argv)
 		goto out;
 	}
 
-	session = perf_session__new(&data, 0, &c2c.tool);
+	session = perf_session__new(&data, &c2c.tool);
 	if (IS_ERR(session)) {
 		err = PTR_ERR(session);
 		pr_debug("Error creating perf session\n");
diff --git a/tools/perf/builtin-data.c b/tools/perf/builtin-data.c
index 15ca23675ef0..b7f9dc85a407 100644
--- a/tools/perf/builtin-data.c
+++ b/tools/perf/builtin-data.c
@@ -21,46 +21,21 @@ static struct data_cmd data_cmds[];
 #define for_each_cmd(cmd) \
 	for (cmd = data_cmds; cmd && cmd->name; cmd++)
 
-static const struct option data_options[] = {
-	OPT_END()
-};
-
 static const char * const data_subcommands[] = { "convert", NULL };
 
 static const char *data_usage[] = {
-	"perf data [<common options>] <command> [<options>]",
+	"perf data convert [<options>]",
 	NULL
 };
 
-static void print_usage(void)
-{
-	struct data_cmd *cmd;
-
-	printf("Usage:\n");
-	printf("\t%s\n\n", data_usage[0]);
-	printf("\tAvailable commands:\n");
-
-	for_each_cmd(cmd) {
-		printf("\t %s\t- %s\n", cmd->name, cmd->summary);
-	}
-
-	printf("\n");
-}
-
-static const char * const data_convert_usage[] = {
-	"perf data convert [<options>]",
-	NULL
+const char *to_json;
+const char *to_ctf;
+struct perf_data_convert_opts opts = {
+	.force = false,
+	.all = false,
 };
 
-static int cmd_data_convert(int argc, const char **argv)
-{
-	const char *to_json = NULL;
-	const char *to_ctf = NULL;
-	struct perf_data_convert_opts opts = {
-		.force = false,
-		.all = false,
-	};
-	const struct option options[] = {
+const struct option data_options[] = {
 		OPT_INCR('v', "verbose", &verbose, "be more verbose"),
 		OPT_STRING('i', "input", &input_name, "file", "input file name"),
 		OPT_STRING(0, "to-json", &to_json, NULL, "Convert to JSON format"),
@@ -73,10 +48,13 @@ static int cmd_data_convert(int argc, const char **argv)
 		OPT_END()
 	};
 
-	argc = parse_options(argc, argv, options,
-			     data_convert_usage, 0);
+static int cmd_data_convert(int argc, const char **argv)
+{
+
+	argc = parse_options(argc, argv, data_options,
+			     data_usage, 0);
 	if (argc) {
-		usage_with_options(data_convert_usage, options);
+		usage_with_options(data_usage, data_options);
 		return -1;
 	}
 
@@ -116,14 +94,13 @@ int cmd_data(int argc, const char **argv)
 	struct data_cmd *cmd;
 	const char *cmdstr;
 
-	/* No command specified. */
-	if (argc < 2)
-		goto usage;
-
 	argc = parse_options_subcommand(argc, argv, data_options, data_subcommands, data_usage,
 			     PARSE_OPT_STOP_AT_NON_OPTION);
-	if (argc < 1)
-		goto usage;
+
+	if (!argc) {
+		usage_with_options(data_usage, data_options);
+		return -1;
+	}
 
 	cmdstr = argv[0];
 
@@ -135,7 +112,6 @@ int cmd_data(int argc, const char **argv)
 	}
 
 	pr_err("Unknown command: %s\n", cmdstr);
-usage:
-	print_usage();
+	usage_with_options(data_usage, data_options);
 	return -1;
 }
diff --git a/tools/perf/builtin-diff.c b/tools/perf/builtin-diff.c
index 80450c0e8f36..d925096dd7f0 100644
--- a/tools/perf/builtin-diff.c
+++ b/tools/perf/builtin-diff.c
@@ -1156,7 +1156,7 @@ static int check_file_brstack(void)
 	int i;
 
 	data__for_each_file(i, d) {
-		d->session = perf_session__new(&d->data, false, &pdiff.tool);
+		d->session = perf_session__new(&d->data, &pdiff.tool);
 		if (IS_ERR(d->session)) {
 			pr_err("Failed to open %s\n", d->data.path);
 			return PTR_ERR(d->session);
@@ -1188,7 +1188,7 @@ static int __cmd_diff(void)
 	ret = -EINVAL;
 
 	data__for_each_file(i, d) {
-		d->session = perf_session__new(&d->data, false, &pdiff.tool);
+		d->session = perf_session__new(&d->data, &pdiff.tool);
 		if (IS_ERR(d->session)) {
 			ret = PTR_ERR(d->session);
 			pr_err("Failed to open %s\n", d->data.path);
diff --git a/tools/perf/builtin-evlist.c b/tools/perf/builtin-evlist.c
index 4617b32c9c97..b1076177c37f 100644
--- a/tools/perf/builtin-evlist.c
+++ b/tools/perf/builtin-evlist.c
@@ -42,7 +42,7 @@ static int __cmd_evlist(const char *file_name, struct perf_attr_details *details
 	};
 	bool has_tracepoint = false;
 
-	session = perf_session__new(&data, 0, &tool);
+	session = perf_session__new(&data, &tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-inject.c b/tools/perf/builtin-inject.c
index c88c61e7f8cc..6ad191e731fc 100644
--- a/tools/perf/builtin-inject.c
+++ b/tools/perf/builtin-inject.c
@@ -46,6 +46,7 @@ struct perf_inject {
 	bool			jit_mode;
 	bool			in_place_update;
 	bool			in_place_update_dry_run;
+	bool			is_pipe;
 	const char		*input_name;
 	struct perf_data	output;
 	u64			bytes_written;
@@ -126,7 +127,7 @@ static int perf_event__repipe_attr(struct perf_tool *tool,
 	if (ret)
 		return ret;
 
-	if (!inject->output.is_pipe)
+	if (!inject->is_pipe)
 		return 0;
 
 	return perf_event__repipe_synth(tool, event);
@@ -826,14 +827,14 @@ static int __cmd_inject(struct perf_inject *inject)
 	if (!inject->itrace_synth_opts.set)
 		auxtrace_index__free(&session->auxtrace_index);
 
-	if (!data_out->is_pipe && !inject->in_place_update)
+	if (!inject->is_pipe && !inject->in_place_update)
 		lseek(fd, output_data_offset, SEEK_SET);
 
 	ret = perf_session__process_events(session);
 	if (ret)
 		return ret;
 
-	if (!data_out->is_pipe && !inject->in_place_update) {
+	if (!inject->is_pipe && !inject->in_place_update) {
 		if (inject->build_ids)
 			perf_header__set_feat(&session->header,
 					      HEADER_BUILD_ID);
@@ -918,6 +919,7 @@ int cmd_inject(int argc, const char **argv)
 		.use_stdio = true,
 	};
 	int ret;
+	bool repipe = true;
 
 	struct option options[] = {
 		OPT_BOOLEAN('b', "build-ids", &inject.build_ids,
@@ -992,7 +994,20 @@ int cmd_inject(int argc, const char **argv)
 	}
 
 	data.path = inject.input_name;
-	inject.session = perf_session__new(&data, inject.output.is_pipe, &inject.tool);
+	if (!strcmp(inject.input_name, "-") || inject.output.is_pipe) {
+		inject.is_pipe = true;
+		/*
+		 * Do not repipe header when input is a regular file
+		 * since either it can rewrite the header at the end
+		 * or write a new pipe header.
+		 */
+		if (strcmp(inject.input_name, "-"))
+			repipe = false;
+	}
+
+	inject.session = __perf_session__new(&data, repipe,
+					     perf_data__fd(&inject.output),
+					     &inject.tool);
 	if (IS_ERR(inject.session)) {
 		ret = PTR_ERR(inject.session);
 		goto out_close_output;
@@ -1001,6 +1016,21 @@ int cmd_inject(int argc, const char **argv)
 	if (zstd_init(&(inject.session->zstd_data), 0) < 0)
 		pr_warning("Decompression initialization failed.\n");
 
+	if (!data.is_pipe && inject.output.is_pipe) {
+		ret = perf_header__write_pipe(perf_data__fd(&inject.output));
+		if (ret < 0) {
+			pr_err("Couldn't write a new pipe header.\n");
+			goto out_delete;
+		}
+
+		ret = perf_event__synthesize_for_pipe(&inject.tool,
+						      inject.session,
+						      &inject.output,
+						      perf_event__repipe);
+		if (ret < 0)
+			goto out_delete;
+	}
+
 	if (inject.build_ids && !inject.build_id_all) {
 		/*
 		 * to make sure the mmap records are ordered correctly
diff --git a/tools/perf/builtin-kmem.c b/tools/perf/builtin-kmem.c
index 0062445e8ead..da03a341c63c 100644
--- a/tools/perf/builtin-kmem.c
+++ b/tools/perf/builtin-kmem.c
@@ -1953,7 +1953,7 @@ int cmd_kmem(int argc, const char **argv)
 
 	data.path = input_name;
 
-	kmem_session = session = perf_session__new(&data, false, &perf_kmem);
+	kmem_session = session = perf_session__new(&data, &perf_kmem);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-kvm.c b/tools/perf/builtin-kvm.c
index 1105c9e40a80..aa1b127ffb5b 100644
--- a/tools/perf/builtin-kvm.c
+++ b/tools/perf/builtin-kvm.c
@@ -1093,7 +1093,7 @@ static int read_events(struct perf_kvm_stat *kvm)
 	};
 
 	kvm->tool = eops;
-	kvm->session = perf_session__new(&file, false, &kvm->tool);
+	kvm->session = perf_session__new(&file, &kvm->tool);
 	if (IS_ERR(kvm->session)) {
 		pr_err("Initializing perf session failed\n");
 		return PTR_ERR(kvm->session);
@@ -1447,7 +1447,7 @@ static int kvm_events_live(struct perf_kvm_stat *kvm,
 	/*
 	 * perf session
 	 */
-	kvm->session = perf_session__new(&data, false, &kvm->tool);
+	kvm->session = perf_session__new(&data, &kvm->tool);
 	if (IS_ERR(kvm->session)) {
 		err = PTR_ERR(kvm->session);
 		goto out;
diff --git a/tools/perf/builtin-lock.c b/tools/perf/builtin-lock.c
index 01326e370009..d70131b7b1b1 100644
--- a/tools/perf/builtin-lock.c
+++ b/tools/perf/builtin-lock.c
@@ -868,7 +868,7 @@ static int __cmd_report(bool display_info)
 		.force = force,
 	};
 
-	session = perf_session__new(&data, false, &eops);
+	session = perf_session__new(&data, &eops);
 	if (IS_ERR(session)) {
 		pr_err("Initializing perf session failed\n");
 		return PTR_ERR(session);
diff --git a/tools/perf/builtin-mem.c b/tools/perf/builtin-mem.c
index 0fd2a74dbaca..fcf65a59bea2 100644
--- a/tools/perf/builtin-mem.c
+++ b/tools/perf/builtin-mem.c
@@ -271,8 +271,7 @@ static int report_raw_events(struct perf_mem *mem)
 		.force = mem->force,
 	};
 	int ret;
-	struct perf_session *session = perf_session__new(&data, false,
-							 &mem->tool);
+	struct perf_session *session = perf_session__new(&data, &mem->tool);
 
 	if (IS_ERR(session))
 		return PTR_ERR(session);
diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index 671a21c9ee4d..b3509d9d20cc 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -910,7 +910,8 @@ static int record__open(struct record *rec)
 		 * Enable the dummy event when the process is forked for
 		 * initial_delay, immediately for system wide.
 		 */
-		if (opts->initial_delay && !pos->immediate)
+		if (opts->initial_delay && !pos->immediate &&
+		    !target__has_cpu(&opts->target))
 			pos->core.attr.enable_on_exec = 1;
 		else
 			pos->immediate = 1;
@@ -1387,7 +1388,6 @@ static int record__synthesize(struct record *rec, bool tail)
 	struct perf_data *data = &rec->data;
 	struct record_opts *opts = &rec->opts;
 	struct perf_tool *tool = &rec->tool;
-	int fd = perf_data__fd(data);
 	int err = 0;
 	event_op f = process_synthesized_event;
 
@@ -1395,41 +1395,12 @@ static int record__synthesize(struct record *rec, bool tail)
 		return 0;
 
 	if (data->is_pipe) {
-		/*
-		 * We need to synthesize events first, because some
-		 * features works on top of them (on report side).
-		 */
-		err = perf_event__synthesize_attrs(tool, rec->evlist,
-						   process_synthesized_event);
-		if (err < 0) {
-			pr_err("Couldn't synthesize attrs.\n");
-			goto out;
-		}
-
-		err = perf_event__synthesize_features(tool, session, rec->evlist,
+		err = perf_event__synthesize_for_pipe(tool, session, data,
 						      process_synthesized_event);
-		if (err < 0) {
-			pr_err("Couldn't synthesize features.\n");
-			return err;
-		}
+		if (err < 0)
+			goto out;
 
-		if (have_tracepoints(&rec->evlist->core.entries)) {
-			/*
-			 * FIXME err <= 0 here actually means that
-			 * there were no tracepoints so its not really
-			 * an error, just that we don't need to
-			 * synthesize anything.  We really have to
-			 * return this more properly and also
-			 * propagate errors that now are calling die()
-			 */
-			err = perf_event__synthesize_tracing_data(tool,	fd, rec->evlist,
-								  process_synthesized_event);
-			if (err <= 0) {
-				pr_err("Couldn't record tracing data.\n");
-				goto out;
-			}
-			rec->bytes_written += err;
-		}
+		rec->bytes_written += err;
 	}
 
 	err = perf_event__synth_time_conv(record__pick_pc(rec), tool,
@@ -1681,7 +1652,7 @@ static int __cmd_record(struct record *rec, int argc, const char **argv)
 		signal(SIGUSR2, SIG_IGN);
 	}
 
-	session = perf_session__new(data, false, tool);
+	session = perf_session__new(data, tool);
 	if (IS_ERR(session)) {
 		pr_err("Perf session creation failed.\n");
 		return PTR_ERR(session);
@@ -2786,7 +2757,7 @@ int cmd_record(int argc, const char **argv)
 
 	if (rec->opts.affinity != PERF_AFFINITY_SYS) {
 		rec->affinity_mask.nbits = cpu__max_cpu();
-		rec->affinity_mask.bits = bitmap_alloc(rec->affinity_mask.nbits);
+		rec->affinity_mask.bits = bitmap_zalloc(rec->affinity_mask.nbits);
 		if (!rec->affinity_mask.bits) {
 			pr_err("Failed to allocate thread mask for %zd cpus\n", rec->affinity_mask.nbits);
 			err = -ENOMEM;
@@ -2884,6 +2855,13 @@ int cmd_record(int argc, const char **argv)
 	/* Enable ignoring missing threads when -u/-p option is defined. */
 	rec->opts.ignore_missing_thread = rec->opts.target.uid != UINT_MAX || rec->opts.target.pid;
 
+	if (evlist__fix_hybrid_cpus(rec->evlist, rec->opts.target.cpu_list)) {
+		pr_err("failed to use cpu list %s\n",
+		       rec->opts.target.cpu_list);
+		goto out;
+	}
+
+	rec->opts.target.hybrid = perf_pmu__has_hybrid();
 	err = -ENOMEM;
 	if (evlist__create_maps(rec->evlist, &rec->opts.target) < 0)
 		usage_with_options(record_usage, record_options);
diff --git a/tools/perf/builtin-report.c b/tools/perf/builtin-report.c
index dc0364f671b9..a0316ce910db 100644
--- a/tools/perf/builtin-report.c
+++ b/tools/perf/builtin-report.c
@@ -1411,7 +1411,7 @@ int cmd_report(int argc, const char **argv)
 	data.force = symbol_conf.force;
 
 repeat:
-	session = perf_session__new(&data, false, &report.tool);
+	session = perf_session__new(&data, &report.tool);
 	if (IS_ERR(session)) {
 		ret = PTR_ERR(session);
 		goto exit;
diff --git a/tools/perf/builtin-sched.c b/tools/perf/builtin-sched.c
index 1ff10d4bccf3..635a6b5a9ec9 100644
--- a/tools/perf/builtin-sched.c
+++ b/tools/perf/builtin-sched.c
@@ -1804,7 +1804,7 @@ static int perf_sched__read_events(struct perf_sched *sched)
 	};
 	int rc = -1;
 
-	session = perf_session__new(&data, false, &sched->tool);
+	session = perf_session__new(&data, &sched->tool);
 	if (IS_ERR(session)) {
 		pr_debug("Error creating perf session");
 		return PTR_ERR(session);
@@ -3011,7 +3011,7 @@ static int perf_sched__timehist(struct perf_sched *sched)
 
 	symbol_conf.use_callchain = sched->show_callchain;
 
-	session = perf_session__new(&data, false, &sched->tool);
+	session = perf_session__new(&data, &sched->tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-script.c b/tools/perf/builtin-script.c
index 064da7f3618d..0e824f7d8b19 100644
--- a/tools/perf/builtin-script.c
+++ b/tools/perf/builtin-script.c
@@ -2212,7 +2212,7 @@ static int process_sample_event(struct perf_tool *tool,
 	if (filter_cpu(sample))
 		goto out_put;
 
-	if (machine__resolve(machine, &al, sample) < 0) {
+	if (!al.thread && machine__resolve(machine, &al, sample) < 0) {
 		pr_err("problem processing %d event, skipping it.\n",
 		       event->header.type);
 		ret = -1;
@@ -2493,6 +2493,17 @@ process_lost_event(struct perf_tool *tool,
 }
 
 static int
+process_throttle_event(struct perf_tool *tool __maybe_unused,
+		       union perf_event *event,
+		       struct perf_sample *sample,
+		       struct machine *machine)
+{
+	if (scripting_ops && scripting_ops->process_throttle)
+		scripting_ops->process_throttle(event, sample, machine);
+	return 0;
+}
+
+static int
 process_finished_round_event(struct perf_tool *tool __maybe_unused,
 			     union perf_event *event,
 			     struct ordered_events *oe __maybe_unused)
@@ -3294,7 +3305,7 @@ int find_scripts(char **scripts_array, char **scripts_path_array, int num,
 	char *temp;
 	int i = 0;
 
-	session = perf_session__new(&data, false, NULL);
+	session = perf_session__new(&data, NULL);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
@@ -3652,6 +3663,8 @@ int cmd_script(int argc, const char **argv)
 			.stat_config	 = process_stat_config_event,
 			.thread_map	 = process_thread_map_event,
 			.cpu_map	 = process_cpu_map_event,
+			.throttle	 = process_throttle_event,
+			.unthrottle	 = process_throttle_event,
 			.ordered_events	 = true,
 			.ordering_requires_timestamps = true,
 		},
@@ -4007,7 +4020,7 @@ script_found:
 		use_browser = 0;
 	}
 
-	session = perf_session__new(&data, false, &script.tool);
+	session = perf_session__new(&data, &script.tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/builtin-stat.c b/tools/perf/builtin-stat.c
index 634375937db9..f6e87b7be5fa 100644
--- a/tools/perf/builtin-stat.c
+++ b/tools/perf/builtin-stat.c
@@ -1996,7 +1996,7 @@ static int __cmd_record(int argc, const char **argv)
 		return -1;
 	}
 
-	session = perf_session__new(data, false, NULL);
+	session = perf_session__new(data, NULL);
 	if (IS_ERR(session)) {
 		pr_err("Perf session creation failed\n");
 		return PTR_ERR(session);
@@ -2168,7 +2168,7 @@ static int __cmd_report(int argc, const char **argv)
 	perf_stat.data.path = input_name;
 	perf_stat.data.mode = PERF_DATA_MODE_READ;
 
-	session = perf_session__new(&perf_stat.data, false, &perf_stat.tool);
+	session = perf_session__new(&perf_stat.data, &perf_stat.tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
@@ -2386,7 +2386,8 @@ int cmd_stat(int argc, const char **argv)
 	 * --per-thread is aggregated per thread, we dont mix it with cpu mode
 	 */
 	if (((stat_config.aggr_mode != AGGR_GLOBAL &&
-	      stat_config.aggr_mode != AGGR_THREAD) || nr_cgroups) &&
+	      stat_config.aggr_mode != AGGR_THREAD) ||
+	     (nr_cgroups || stat_config.cgroup_list)) &&
 	    !target__has_cpu(&target)) {
 		fprintf(stderr, "both cgroup and no-aggregation "
 			"modes only available in system-wide mode\n");
@@ -2394,6 +2395,7 @@ int cmd_stat(int argc, const char **argv)
 		parse_options_usage(stat_usage, stat_options, "G", 1);
 		parse_options_usage(NULL, stat_options, "A", 1);
 		parse_options_usage(NULL, stat_options, "a", 1);
+		parse_options_usage(NULL, stat_options, "for-each-cgroup", 0);
 		goto out;
 	}
 
@@ -2430,6 +2432,12 @@ int cmd_stat(int argc, const char **argv)
 	if ((stat_config.aggr_mode == AGGR_THREAD) && (target.system_wide))
 		target.per_thread = true;
 
+	if (evlist__fix_hybrid_cpus(evsel_list, target.cpu_list)) {
+		pr_err("failed to use cpu list %s\n", target.cpu_list);
+		goto out;
+	}
+
+	target.hybrid = perf_pmu__has_hybrid();
 	if (evlist__create_maps(evsel_list, &target) < 0) {
 		if (target__has_task(&target)) {
 			pr_err("Problems finding threads of monitor\n");
diff --git a/tools/perf/builtin-timechart.c b/tools/perf/builtin-timechart.c
index 4e380e7b5230..43bf4d67edb0 100644
--- a/tools/perf/builtin-timechart.c
+++ b/tools/perf/builtin-timechart.c
@@ -1598,8 +1598,7 @@ static int __cmd_timechart(struct timechart *tchart, const char *output_name)
 		.force = tchart->force,
 	};
 
-	struct perf_session *session = perf_session__new(&data, false,
-							 &tchart->tool);
+	struct perf_session *session = perf_session__new(&data, &tchart->tool);
 	int ret = -EINVAL;
 
 	if (IS_ERR(session))
diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c
index 02f8bb5dbc0f..a3ae9176a83e 100644
--- a/tools/perf/builtin-top.c
+++ b/tools/perf/builtin-top.c
@@ -1740,7 +1740,7 @@ int cmd_top(int argc, const char **argv)
 		signal(SIGWINCH, winch_sig);
 	}
 
-	top.session = perf_session__new(NULL, false, NULL);
+	top.session = perf_session__new(NULL, NULL);
 	if (IS_ERR(top.session)) {
 		status = PTR_ERR(top.session);
 		goto out_delete_evlist;
diff --git a/tools/perf/builtin-trace.c b/tools/perf/builtin-trace.c
index 9c265fa96011..2bf21194c7b3 100644
--- a/tools/perf/builtin-trace.c
+++ b/tools/perf/builtin-trace.c
@@ -707,7 +707,15 @@ static size_t syscall_arg__scnprintf_char_array(char *bf, size_t size, struct sy
 
 static const char *bpf_cmd[] = {
 	"MAP_CREATE", "MAP_LOOKUP_ELEM", "MAP_UPDATE_ELEM", "MAP_DELETE_ELEM",
-	"MAP_GET_NEXT_KEY", "PROG_LOAD",
+	"MAP_GET_NEXT_KEY", "PROG_LOAD", "OBJ_PIN", "OBJ_GET", "PROG_ATTACH",
+	"PROG_DETACH", "PROG_TEST_RUN", "PROG_GET_NEXT_ID", "MAP_GET_NEXT_ID",
+	"PROG_GET_FD_BY_ID", "MAP_GET_FD_BY_ID", "OBJ_GET_INFO_BY_FD",
+	"PROG_QUERY", "RAW_TRACEPOINT_OPEN", "BTF_LOAD", "BTF_GET_FD_BY_ID",
+	"TASK_FD_QUERY", "MAP_LOOKUP_AND_DELETE_ELEM", "MAP_FREEZE",
+	"BTF_GET_NEXT_ID", "MAP_LOOKUP_BATCH", "MAP_LOOKUP_AND_DELETE_BATCH",
+	"MAP_UPDATE_BATCH", "MAP_DELETE_BATCH", "LINK_CREATE", "LINK_UPDATE",
+	"LINK_GET_FD_BY_ID", "LINK_GET_NEXT_ID", "ENABLE_STATS", "ITER_CREATE",
+	"LINK_DETACH", "PROG_BIND_MAP",
 };
 static DEFINE_STRARRAY(bpf_cmd, "BPF_");
 
@@ -4228,7 +4236,7 @@ static int trace__replay(struct trace *trace)
 	/* add tid to output */
 	trace->multiple_threads = true;
 
-	session = perf_session__new(&data, false, &trace->tool);
+	session = perf_session__new(&data, &trace->tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/dlfilters/dlfilter-test-api-v0.c b/tools/perf/dlfilters/dlfilter-test-api-v0.c
new file mode 100644
index 000000000000..7565a1852c74
--- /dev/null
+++ b/tools/perf/dlfilters/dlfilter-test-api-v0.c
@@ -0,0 +1,336 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dlfilter-test-api-v0.c: test original (v0) API for perf --dlfilter shared object
+ * Copyright (c) 2021, Intel Corporation.
+ */
+#include <stdio.h>
+#include <stdlib.h>
+#include <string.h>
+#include <stdbool.h>
+
+/*
+ * Copy original (v0) API instead of including current API
+ */
+#include <linux/perf_event.h>
+#include <linux/types.h>
+
+/* Definitions for perf_dlfilter_sample flags */
+enum {
+	PERF_DLFILTER_FLAG_BRANCH	= 1ULL << 0,
+	PERF_DLFILTER_FLAG_CALL		= 1ULL << 1,
+	PERF_DLFILTER_FLAG_RETURN	= 1ULL << 2,
+	PERF_DLFILTER_FLAG_CONDITIONAL	= 1ULL << 3,
+	PERF_DLFILTER_FLAG_SYSCALLRET	= 1ULL << 4,
+	PERF_DLFILTER_FLAG_ASYNC	= 1ULL << 5,
+	PERF_DLFILTER_FLAG_INTERRUPT	= 1ULL << 6,
+	PERF_DLFILTER_FLAG_TX_ABORT	= 1ULL << 7,
+	PERF_DLFILTER_FLAG_TRACE_BEGIN	= 1ULL << 8,
+	PERF_DLFILTER_FLAG_TRACE_END	= 1ULL << 9,
+	PERF_DLFILTER_FLAG_IN_TX	= 1ULL << 10,
+	PERF_DLFILTER_FLAG_VMENTRY	= 1ULL << 11,
+	PERF_DLFILTER_FLAG_VMEXIT	= 1ULL << 12,
+};
+
+/*
+ * perf sample event information (as per perf script and <linux/perf_event.h>)
+ */
+struct perf_dlfilter_sample {
+	__u32 size; /* Size of this structure (for compatibility checking) */
+	__u16 ins_lat;		/* Refer PERF_SAMPLE_WEIGHT_TYPE in <linux/perf_event.h> */
+	__u16 p_stage_cyc;	/* Refer PERF_SAMPLE_WEIGHT_TYPE in <linux/perf_event.h> */
+	__u64 ip;
+	__s32 pid;
+	__s32 tid;
+	__u64 time;
+	__u64 addr;
+	__u64 id;
+	__u64 stream_id;
+	__u64 period;
+	__u64 weight;		/* Refer PERF_SAMPLE_WEIGHT_TYPE in <linux/perf_event.h> */
+	__u64 transaction;	/* Refer PERF_SAMPLE_TRANSACTION in <linux/perf_event.h> */
+	__u64 insn_cnt;	/* For instructions-per-cycle (IPC) */
+	__u64 cyc_cnt;		/* For instructions-per-cycle (IPC) */
+	__s32 cpu;
+	__u32 flags;		/* Refer PERF_DLFILTER_FLAG_* above */
+	__u64 data_src;		/* Refer PERF_SAMPLE_DATA_SRC in <linux/perf_event.h> */
+	__u64 phys_addr;	/* Refer PERF_SAMPLE_PHYS_ADDR in <linux/perf_event.h> */
+	__u64 data_page_size;	/* Refer PERF_SAMPLE_DATA_PAGE_SIZE in <linux/perf_event.h> */
+	__u64 code_page_size;	/* Refer PERF_SAMPLE_CODE_PAGE_SIZE in <linux/perf_event.h> */
+	__u64 cgroup;		/* Refer PERF_SAMPLE_CGROUP in <linux/perf_event.h> */
+	__u8  cpumode;		/* Refer CPUMODE_MASK etc in <linux/perf_event.h> */
+	__u8  addr_correlates_sym; /* True => resolve_addr() can be called */
+	__u16 misc;		/* Refer perf_event_header in <linux/perf_event.h> */
+	__u32 raw_size;		/* Refer PERF_SAMPLE_RAW in <linux/perf_event.h> */
+	const void *raw_data;	/* Refer PERF_SAMPLE_RAW in <linux/perf_event.h> */
+	__u64 brstack_nr;	/* Number of brstack entries */
+	const struct perf_branch_entry *brstack; /* Refer <linux/perf_event.h> */
+	__u64 raw_callchain_nr;	/* Number of raw_callchain entries */
+	const __u64 *raw_callchain; /* Refer <linux/perf_event.h> */
+	const char *event;
+};
+
+/*
+ * Address location (as per perf script)
+ */
+struct perf_dlfilter_al {
+	__u32 size; /* Size of this structure (for compatibility checking) */
+	__u32 symoff;
+	const char *sym;
+	__u64 addr; /* Mapped address (from dso) */
+	__u64 sym_start;
+	__u64 sym_end;
+	const char *dso;
+	__u8  sym_binding; /* STB_LOCAL, STB_GLOBAL or STB_WEAK, refer <elf.h> */
+	__u8  is_64_bit; /* Only valid if dso is not NULL */
+	__u8  is_kernel_ip; /* True if in kernel space */
+	__u32 buildid_size;
+	__u8 *buildid;
+	/* Below members are only populated by resolve_ip() */
+	__u8 filtered; /* True if this sample event will be filtered out */
+	const char *comm;
+};
+
+struct perf_dlfilter_fns {
+	/* Return information about ip */
+	const struct perf_dlfilter_al *(*resolve_ip)(void *ctx);
+	/* Return information about addr (if addr_correlates_sym) */
+	const struct perf_dlfilter_al *(*resolve_addr)(void *ctx);
+	/* Return arguments from --dlarg option */
+	char **(*args)(void *ctx, int *dlargc);
+	/*
+	 * Return information about address (al->size must be set before
+	 * calling). Returns 0 on success, -1 otherwise.
+	 */
+	__s32 (*resolve_address)(void *ctx, __u64 address, struct perf_dlfilter_al *al);
+	/* Return instruction bytes and length */
+	const __u8 *(*insn)(void *ctx, __u32 *length);
+	/* Return source file name and line number */
+	const char *(*srcline)(void *ctx, __u32 *line_number);
+	/* Return perf_event_attr, refer <linux/perf_event.h> */
+	struct perf_event_attr *(*attr)(void *ctx);
+	/* Read object code, return numbers of bytes read */
+	__s32 (*object_code)(void *ctx, __u64 ip, void *buf, __u32 len);
+	/* Reserved */
+	void *(*reserved[120])(void *);
+};
+
+struct perf_dlfilter_fns perf_dlfilter_fns;
+
+static int verbose;
+
+#define pr_debug(fmt, ...) do { \
+		if (verbose) \
+			fprintf(stderr, fmt, ##__VA_ARGS__); \
+	} while (0)
+
+static int test_fail(const char *msg)
+{
+	pr_debug("%s\n", msg);
+	return -1;
+}
+
+#define CHECK(x) do { \
+		if (!(x)) \
+			return test_fail("Check '" #x "' failed\n"); \
+	} while (0)
+
+struct filter_data {
+	__u64 ip;
+	__u64 addr;
+	int do_early;
+	int early_filter_cnt;
+	int filter_cnt;
+};
+
+static struct filter_data *filt_dat;
+
+int start(void **data, void *ctx)
+{
+	int dlargc;
+	char **dlargv;
+	struct filter_data *d;
+	static bool called;
+
+	verbose = 1;
+
+	CHECK(!filt_dat && !called);
+	called = true;
+
+	d = calloc(1, sizeof(*d));
+	if (!d)
+		test_fail("Failed to allocate memory");
+	filt_dat = d;
+	*data = d;
+
+	dlargv = perf_dlfilter_fns.args(ctx, &dlargc);
+
+	CHECK(dlargc == 6);
+	CHECK(!strcmp(dlargv[0], "first"));
+	verbose = strtol(dlargv[1], NULL, 0);
+	d->ip = strtoull(dlargv[2], NULL, 0);
+	d->addr = strtoull(dlargv[3], NULL, 0);
+	d->do_early = strtol(dlargv[4], NULL, 0);
+	CHECK(!strcmp(dlargv[5], "last"));
+
+	pr_debug("%s API\n", __func__);
+
+	return 0;
+}
+
+#define CHECK_SAMPLE(x) do { \
+		if (sample->x != expected.x) \
+			return test_fail("'" #x "' not expected value\n"); \
+	} while (0)
+
+static int check_sample(struct filter_data *d, const struct perf_dlfilter_sample *sample)
+{
+	struct perf_dlfilter_sample expected = {
+		.ip		= d->ip,
+		.pid		= 12345,
+		.tid		= 12346,
+		.time		= 1234567890,
+		.addr		= d->addr,
+		.id		= 99,
+		.stream_id	= 101,
+		.period		= 543212345,
+		.cpu		= 31,
+		.cpumode	= PERF_RECORD_MISC_USER,
+		.addr_correlates_sym = 1,
+		.misc		= PERF_RECORD_MISC_USER,
+	};
+
+	CHECK(sample->size >= sizeof(struct perf_dlfilter_sample));
+
+	CHECK_SAMPLE(ip);
+	CHECK_SAMPLE(pid);
+	CHECK_SAMPLE(tid);
+	CHECK_SAMPLE(time);
+	CHECK_SAMPLE(addr);
+	CHECK_SAMPLE(id);
+	CHECK_SAMPLE(stream_id);
+	CHECK_SAMPLE(period);
+	CHECK_SAMPLE(cpu);
+	CHECK_SAMPLE(cpumode);
+	CHECK_SAMPLE(addr_correlates_sym);
+	CHECK_SAMPLE(misc);
+
+	CHECK(!sample->raw_data);
+	CHECK_SAMPLE(brstack_nr);
+	CHECK(!sample->brstack);
+	CHECK_SAMPLE(raw_callchain_nr);
+	CHECK(!sample->raw_callchain);
+
+#define EVENT_NAME "branches:"
+	CHECK(!strncmp(sample->event, EVENT_NAME, strlen(EVENT_NAME)));
+
+	return 0;
+}
+
+static int check_al(void *ctx)
+{
+	const struct perf_dlfilter_al *al;
+
+	al = perf_dlfilter_fns.resolve_ip(ctx);
+	if (!al)
+		return test_fail("resolve_ip() failed");
+
+	CHECK(al->sym && !strcmp("foo", al->sym));
+	CHECK(!al->symoff);
+
+	return 0;
+}
+
+static int check_addr_al(void *ctx)
+{
+	const struct perf_dlfilter_al *addr_al;
+
+	addr_al = perf_dlfilter_fns.resolve_addr(ctx);
+	if (!addr_al)
+		return test_fail("resolve_addr() failed");
+
+	CHECK(addr_al->sym && !strcmp("bar", addr_al->sym));
+	CHECK(!addr_al->symoff);
+
+	return 0;
+}
+
+static int check_attr(void *ctx)
+{
+	struct perf_event_attr *attr = perf_dlfilter_fns.attr(ctx);
+
+	CHECK(attr);
+	CHECK(attr->type == PERF_TYPE_HARDWARE);
+	CHECK(attr->config == PERF_COUNT_HW_BRANCH_INSTRUCTIONS);
+
+	return 0;
+}
+
+static int do_checks(void *data, const struct perf_dlfilter_sample *sample, void *ctx, bool early)
+{
+	struct filter_data *d = data;
+
+	CHECK(data && filt_dat == data);
+
+	if (early) {
+		CHECK(!d->early_filter_cnt);
+		d->early_filter_cnt += 1;
+	} else {
+		CHECK(!d->filter_cnt);
+		CHECK(d->early_filter_cnt);
+		CHECK(d->do_early != 2);
+		d->filter_cnt += 1;
+	}
+
+	if (check_sample(data, sample))
+		return -1;
+
+	if (check_attr(ctx))
+		return -1;
+
+	if (early && !d->do_early)
+		return 0;
+
+	if (check_al(ctx) || check_addr_al(ctx))
+		return -1;
+
+	if (early)
+		return d->do_early == 2;
+
+	return 1;
+}
+
+int filter_event_early(void *data, const struct perf_dlfilter_sample *sample, void *ctx)
+{
+	pr_debug("%s API\n", __func__);
+
+	return do_checks(data, sample, ctx, true);
+}
+
+int filter_event(void *data, const struct perf_dlfilter_sample *sample, void *ctx)
+{
+	struct filter_data *d = data;
+
+	pr_debug("%s API\n", __func__);
+
+	return do_checks(data, sample, ctx, false);
+}
+
+int stop(void *data, void *ctx)
+{
+	static bool called;
+
+	pr_debug("%s API\n", __func__);
+
+	CHECK(data && filt_dat == data && !called);
+	called = true;
+
+	free(data);
+	filt_dat = NULL;
+	return 0;
+}
+
+const char *filter_description(const char **long_description)
+{
+	*long_description = "Filter used by the 'dlfilter C API' perf test";
+	return "dlfilter to test v0 C API";
+}
diff --git a/tools/perf/util/perf_dlfilter.h b/tools/perf/include/perf/perf_dlfilter.h
index 3eef03d661b4..3eef03d661b4 100644
--- a/tools/perf/util/perf_dlfilter.h
+++ b/tools/perf/include/perf/perf_dlfilter.h
diff --git a/tools/perf/pmu-events/Build b/tools/perf/pmu-events/Build
index 215ba30b8534..a055dee6a46a 100644
--- a/tools/perf/pmu-events/Build
+++ b/tools/perf/pmu-events/Build
@@ -6,10 +6,13 @@ pmu-events-y	+= pmu-events.o
 JDIR		=  pmu-events/arch/$(SRCARCH)
 JSON		=  $(shell [ -d $(JDIR) ] &&				\
 			find $(JDIR) -name '*.json' -o -name 'mapfile.csv')
+JDIR_TEST	=  pmu-events/arch/test
+JSON_TEST	=  $(shell [ -d $(JDIR_TEST) ] &&			\
+			find $(JDIR_TEST) -name '*.json')
 
 #
 # Locate/process JSON files in pmu-events/arch/
 # directory and create tables in pmu-events.c.
 #
-$(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JEVENTS)
+$(OUTPUT)pmu-events/pmu-events.c: $(JSON) $(JSON_TEST) $(JEVENTS)
 	$(Q)$(call echo-cmd,gen)$(JEVENTS) $(SRCARCH) pmu-events/arch $(OUTPUT)pmu-events/pmu-events.c $(V)
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/branch.json b/tools/perf/pmu-events/arch/test/test_soc/cpu/branch.json
index 93ddfd8053ca..93ddfd8053ca 100644
--- a/tools/perf/pmu-events/arch/test/test_cpu/branch.json
+++ b/tools/perf/pmu-events/arch/test/test_soc/cpu/branch.json
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/cache.json b/tools/perf/pmu-events/arch/test/test_soc/cpu/cache.json
index 036d0efdb2bb..036d0efdb2bb 100644
--- a/tools/perf/pmu-events/arch/test/test_cpu/cache.json
+++ b/tools/perf/pmu-events/arch/test/test_soc/cpu/cache.json
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/other.json b/tools/perf/pmu-events/arch/test/test_soc/cpu/other.json
index 7d53d7ecd723..7d53d7ecd723 100644
--- a/tools/perf/pmu-events/arch/test/test_cpu/other.json
+++ b/tools/perf/pmu-events/arch/test/test_soc/cpu/other.json
diff --git a/tools/perf/pmu-events/arch/test/test_cpu/uncore.json b/tools/perf/pmu-events/arch/test/test_soc/cpu/uncore.json
index d0a890cc814d..788766f45dbc 100644
--- a/tools/perf/pmu-events/arch/test/test_cpu/uncore.json
+++ b/tools/perf/pmu-events/arch/test/test_soc/cpu/uncore.json
@@ -17,5 +17,26 @@
 	    "CounterMask": "0",
 	    "Invert": "0",
 	    "EdgeDetect": "0"
-  }
+  },
+  {
+	    "EventCode": "0x7",
+	    "EventName": "uncore_hisi_l3c.rd_hit_cpipe",
+	    "BriefDescription": "Total read hits",
+	    "PublicDescription": "Total read hits",
+	    "Unit": "hisi_sccl,l3c"
+  },
+  {
+	    "EventCode": "0x12",
+	    "EventName": "uncore_imc_free_running.cache_miss",
+	    "BriefDescription": "Total cache misses",
+	    "PublicDescription": "Total cache misses",
+	    "Unit": "imc_free_running"
+  },
+  {
+	    "EventCode": "0x34",
+	    "EventName": "uncore_imc.cache_hits",
+	    "BriefDescription": "Total cache hits",
+	    "PublicDescription": "Total cache hits",
+	    "Unit": "imc"
+  },
 ]
diff --git a/tools/perf/pmu-events/arch/test/test_soc/sys/uncore.json b/tools/perf/pmu-events/arch/test/test_soc/sys/uncore.json
new file mode 100644
index 000000000000..0f681a6e10ea
--- /dev/null
+++ b/tools/perf/pmu-events/arch/test/test_soc/sys/uncore.json
@@ -0,0 +1,9 @@
+[
+  {
+           "BriefDescription": "ddr write-cycles event",
+           "EventCode": "0x2b",
+           "EventName": "sys_ddr_pmu.write_cycles",
+           "Unit": "sys_ddr_pmu",
+           "Compat": "v8"
+   },
+]
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/cache.json b/tools/perf/pmu-events/arch/x86/cascadelakex/cache.json
index 3c0f5837480f..ffafb9f284d2 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/cache.json
@@ -1,61 +1,125 @@
 [
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "L1D data line replacements",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400028000",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x51",
+        "EventName": "L1D.REPLACEMENT",
+        "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400002",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.FB_FULL",
+        "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "L1D miss outstandings duration in cycles",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING",
+        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Cycles with L1D load Misses outstanding.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0004",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
+        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "AnyThread": "1",
+        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "L2 cache lines filling L2",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF1",
+        "EventName": "L2_LINES_IN.ALL",
+        "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
         "SampleAfterValue": "100003",
+        "UMask": "0x1f"
+    },
+    {
+        "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.NON_SILENT",
+        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.SILENT",
+        "SampleAfterValue": "200003",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.USELESS_HWPF",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Deprecated": "1",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.USELESS_PREF",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "L2 code requests",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_CODE_RD",
+        "PublicDescription": "Counts the total number of L2 code requests.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe4"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
+        "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe1"
+    },
+    {
         "BriefDescription": "Demand requests that miss L2 cache",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -66,34 +130,427 @@
         "UMask": "0x27"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Demand requests to L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
+        "PublicDescription": "Demand requests to L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe7"
+    },
+    {
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_PF",
+        "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xf8"
+    },
+    {
+        "BriefDescription": "RFO requests to L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_RFO",
+        "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe2"
+    },
+    {
+        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_HIT",
+        "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "L2 cache misses when fetching instructions",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_MISS",
+        "PublicDescription": "Counts L2 cache misses when fetching instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x24"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests that hit L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
+    },
+    {
+        "BriefDescription": "Demand Data Read miss L2, no rejects",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
+        "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x21"
+    },
+    {
+        "BriefDescription": "All requests that miss L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.MISS",
+        "PublicDescription": "All requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x3f"
+    },
+    {
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.PF_HIT",
+        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xd8"
+    },
+    {
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.PF_MISS",
+        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x38"
+    },
+    {
+        "BriefDescription": "All L2 requests",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.REFERENCES",
+        "PublicDescription": "All L2 requests.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xff"
+    },
+    {
+        "BriefDescription": "RFO requests that hit L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_HIT",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc2"
+    },
+    {
+        "BriefDescription": "RFO requests that miss L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_MISS",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x22"
+    },
+    {
+        "BriefDescription": "L2 writebacks that access L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF0",
+        "EventName": "L2_TRANS.L2_WB",
+        "PublicDescription": "Counts L2 writebacks that access L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Core-originated cacheable demand requests missed L3",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL057",
+        "EventCode": "0x2E",
+        "EventName": "LONGEST_LAT_CACHE.MISS",
+        "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all misses to the L3.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Core-originated cacheable demand requests that refer to L3",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL057",
+        "EventCode": "0x2E",
+        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
+        "PublicDescription": "Counts core-originated cacheable requests to the  L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4f"
+    },
+    {
+        "BriefDescription": "All retired load instructions.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.ALL_LOADS",
+        "PEBS": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "All retired store instructions.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.ALL_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x82"
+    },
+    {
+        "BriefDescription": "Retired load instructions with locked access.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x21"
+    },
+    {
+        "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
         "SampleAfterValue": "100003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x42"
+    },
+    {
+        "BriefDescription": "Retired load instructions that miss the STLB.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
+        "PEBS": "1",
+        "SampleAfterValue": "100003",
+        "UMask": "0x11"
+    },
+    {
+        "BriefDescription": "Retired store instructions that miss the STLB.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "SampleAfterValue": "100003",
+        "UMask": "0x12"
+    },
+    {
+        "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
+        "SampleAfterValue": "20011",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were HitM responses from shared L3.",
+        "SampleAfterValue": "20011",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
+        "PEBS": "1",
+        "SampleAfterValue": "20011",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040010",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were hits in L3 without snoops required.",
         "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.",
+        "SampleAfterValue": "100007",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
+        "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Retired load instructions whose data sources was remote HITM",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions whose data sources was remote HITM.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired load instructions with remote Intel Optane DC persistent memory as the data source where the data request missed all caches. Precise event.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "ELLC": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_PMM",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with remote Intel Optane DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode). Precise event",
+        "SampleAfterValue": "100007",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD4",
+        "EventName": "MEM_LOAD_MISC_RETIRED.UC",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.FB_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L1_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired load instructions missed L1 cache as data sources",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L1_MISS",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L2_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions with L2 cache hits as data sources.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired load instructions missed L2 cache as data sources",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L2_MISS",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions missed L2 cache as data sources.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x10"
+    },
+    {
         "BriefDescription": "Retired load instructions with L3 cache hits as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
@@ -106,2157 +563,2121 @@
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Retired load instructions missed L3 cache as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400001",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L3_MISS",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Retired load instructions with local Intel Optane DC persistent memory as the data source where the data request missed all caches. Precise event.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "ELLC": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.LOCAL_PMM",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with local Intel Optane DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode). Precise event",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Demand and prefetch data reads",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
+        "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Any memory transaction that reached the SQ.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
+        "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Cacheable and noncachaeble code read requests",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
+        "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests sent to uncore",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
+        "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
+        "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
         "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB2",
+        "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL",
+        "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L2 writebacks that access L2 cache",
+        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF0",
-        "EventName": "L2_TRANS.L2_WB",
-        "PublicDescription": "Counts L2 writebacks that access L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x40"
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "L2 cache lines filling L2",
+        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF1",
-        "EventName": "L2_LINES_IN.ALL",
-        "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1f"
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
+        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Cycles with offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
+        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
+        "PublicDescription": "Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "6",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
+        "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200002",
-        "Offcore": "1",
+        "EventName": "OFFCORE_RESPONSE",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0010",
+        "MSRValue": "0x0000010491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020004",
+        "MSRValue": "0x3F803C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040080",
+        "MSRValue": "0x10003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000807F7",
+        "MSRValue": "0x08003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.SILENT",
-        "SampleAfterValue": "200003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080080",
+        "MSRValue": "0x04003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100020",
+        "MSRValue": "0x01003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080004",
+        "MSRValue": "0x08007C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0080",
+        "MSRValue": "0x02003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200001",
+        "MSRValue": "0x00803C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020491",
+        "MSRValue": "0x3F80080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100001",
+        "MSRValue": "0x1000080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200004",
+        "MSRValue": "0x0800080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0100",
+        "MSRValue": "0x0400080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100080",
+        "MSRValue": "0x0100080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200020",
+        "MSRValue": "0x0200080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200100",
+        "MSRValue": "0x0080080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040020",
+        "MSRValue": "0x3F80200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020490",
+        "MSRValue": "0x1000200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200490",
+        "MSRValue": "0x0800200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80028000",
+        "MSRValue": "0x0400200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F804007F7",
+        "MSRValue": "0x0100200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100400",
+        "MSRValue": "0x0200200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020400",
+        "MSRValue": "0x0080200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040400",
+        "MSRValue": "0x3F80040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All requests that miss L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.MISS",
-        "PublicDescription": "All requests that miss L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x3f"
-    },
-    {
-        "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
-        "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400490",
+        "MSRValue": "0x1000040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0400",
+        "MSRValue": "0x0800040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400490",
+        "MSRValue": "0x0400040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020491",
+        "MSRValue": "0x0100040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
-        "SampleAfterValue": "20011",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040001",
+        "MSRValue": "0x0200040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100122",
+        "MSRValue": "0x0080040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0080",
+        "MSRValue": "0x3F80100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions missed L1 cache as data sources",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L1_MISS",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x1000100491",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800108000",
+        "MSRValue": "0x0800100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020122",
+        "MSRValue": "0x0400100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020080",
+        "MSRValue": "0x0100100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200010",
+        "MSRValue": "0x0200100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100002",
+        "MSRValue": "0x0080100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100020",
+        "MSRValue": "0x3F80400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400002",
+        "MSRValue": "0x0080400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200048000",
+        "MSRValue": "0x0100400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080400",
+        "MSRValue": "0x3F80020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200122",
+        "MSRValue": "0x1000020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040001",
+        "MSRValue": "0x0800020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080122",
+        "MSRValue": "0x0400020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020122",
+        "MSRValue": "0x0100020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200122",
+        "MSRValue": "0x0200020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400208000",
+        "MSRValue": "0x0080020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100010",
+        "MSRValue": "0x0000010490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020080",
+        "MSRValue": "0x3F803C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100491",
+        "MSRValue": "0x10003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200020",
+        "MSRValue": "0x08003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Any memory transaction that reached the SQ.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
-        "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
-        "SampleAfterValue": "100003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200010",
+        "MSRValue": "0x04003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200120",
+        "MSRValue": "0x01003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040120",
+        "MSRValue": "0x08007C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100048000",
+        "MSRValue": "0x02003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000028000",
+        "MSRValue": "0x00803C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200400",
+        "MSRValue": "0x3F80080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0010",
+        "MSRValue": "0x1000080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD4",
-        "EventName": "MEM_LOAD_MISC_RETIRED.UC",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Retired load instructions with remote Intel\u00ae Optane\u2122 DC persistent memory as the data source where the data request missed all caches. Precise event.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "ELLC": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_PMM",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with remote Intel\u00ae Optane\u2122 DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode). Precise event",
-        "SampleAfterValue": "100007",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080122",
+        "MSRValue": "0x0800080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080400",
+        "MSRValue": "0x0400080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000807F7",
+        "MSRValue": "0x0100080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0490",
+        "MSRValue": "0x0200080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080002",
+        "MSRValue": "0x0080080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080010",
+        "MSRValue": "0x3F80200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400001",
+        "MSRValue": "0x1000200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010490",
+        "MSRValue": "0x0800200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were hits in L3 without snoops required.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0400200490",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400122",
+        "MSRValue": "0x0100200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
-        "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200020",
+        "MSRValue": "0x0200200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040491",
+        "MSRValue": "0x0080200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040010",
+        "MSRValue": "0x3F80040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0001",
+        "MSRValue": "0x1000040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200028000",
+        "MSRValue": "0x0800040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
-        "PublicDescription": "Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100001",
+        "MSRValue": "0x0400040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of cache line split locks sent to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF4",
-        "EventName": "SQ_MISC.SPLIT_LOCK",
-        "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200100",
+        "MSRValue": "0x0100040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100002",
+        "MSRValue": "0x0200040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.CODE_RD_HIT",
-        "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200120",
+        "MSRValue": "0x0080040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020010",
+        "MSRValue": "0x3F80100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10001007F7",
+        "MSRValue": "0x1000100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040122",
+        "MSRValue": "0x0800100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100010",
+        "MSRValue": "0x0400100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02001007F7",
+        "MSRValue": "0x0100100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020120",
+        "MSRValue": "0x0200100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040120",
+        "MSRValue": "0x0080100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040020",
+        "MSRValue": "0x3F80400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08001007F7",
+        "MSRValue": "0x0080400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C07F7",
+        "MSRValue": "0x0100400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0004",
+        "MSRValue": "0x3F80020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were HitM responses from shared L3.",
-        "SampleAfterValue": "20011",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200020",
+        "MSRValue": "0x1000020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200080",
+        "MSRValue": "0x0800020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400048000",
+        "MSRValue": "0x0400020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0100020490",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x42"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010122",
+        "MSRValue": "0x0200020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100120",
+        "MSRValue": "0x0080020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010002",
+        "MSRValue": "0x0000010120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020491",
+        "MSRValue": "0x3F803C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100120",
+        "MSRValue": "0x10003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010001",
+        "MSRValue": "0x08003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080400",
+        "MSRValue": "0x04003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400080",
+        "MSRValue": "0x01003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0122",
+        "MSRValue": "0x08007C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400080",
+        "MSRValue": "0x02003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080120",
+        "MSRValue": "0x00803C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080001",
+        "MSRValue": "0x3F80080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100491",
+        "MSRValue": "0x1000080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100002",
+        "MSRValue": "0x0800080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400100",
+        "MSRValue": "0x0400080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080001",
+        "MSRValue": "0x0100080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010004",
+        "MSRValue": "0x0200080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100490",
+        "MSRValue": "0x0080080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040004",
+        "MSRValue": "0x3F80200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400020",
+        "MSRValue": "0x1000200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C8000",
+        "MSRValue": "0x0800200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020100",
+        "MSRValue": "0x0400200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200020",
+        "MSRValue": "0x0100200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200400",
+        "MSRValue": "0x0200200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040120",
+        "MSRValue": "0x0080200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0400",
+        "MSRValue": "0x3F80040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040020",
+        "MSRValue": "0x1000040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100120",
+        "MSRValue": "0x0800040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400002",
+        "MSRValue": "0x0400040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040491",
+        "MSRValue": "0x0100040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.FB_FULL",
-        "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0200040120",
+        "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020020",
+        "MSRValue": "0x0080040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0120",
+        "MSRValue": "0x3F80100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020010",
+        "MSRValue": "0x1000100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200490",
+        "MSRValue": "0x0800100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0100",
+        "MSRValue": "0x0400100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040001",
+        "MSRValue": "0x0100100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB2",
-        "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL",
-        "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200020",
+        "MSRValue": "0x0200100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200490",
+        "MSRValue": "0x0080100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0100",
+        "MSRValue": "0x3F80400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400491",
+        "MSRValue": "0x0080400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000207F7",
+        "MSRValue": "0x0100400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080120",
+        "MSRValue": "0x3F80020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions missed L2 cache as data sources",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L2_MISS",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions missed L2 cache as data sources.",
-        "SampleAfterValue": "50021",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0122",
+        "MSRValue": "0x1000020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200400",
+        "MSRValue": "0x0800020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400004",
+        "MSRValue": "0x0400020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -2277,3204 +2698,3038 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200100",
+        "MSRValue": "0x0200020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040080",
+        "MSRValue": "0x0080020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200088000",
+        "MSRValue": "0x00000107F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C8000",
+        "MSRValue": "0x3F803C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200001",
+        "MSRValue": "0x10003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080020",
+        "MSRValue": "0x08003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400490",
+        "MSRValue": "0x04003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400400",
+        "MSRValue": "0x01003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400020",
+        "MSRValue": "0x08007C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.PF_MISS",
-        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x38"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000407F7",
+        "MSRValue": "0x02003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200100",
+        "MSRValue": "0x00803C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080004",
+        "MSRValue": "0x3F800807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040400",
+        "MSRValue": "0x10000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100004",
+        "MSRValue": "0x08000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080080",
+        "MSRValue": "0x04000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000407F7",
+        "MSRValue": "0x01000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800207F7",
+        "MSRValue": "0x02000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0491",
+        "MSRValue": "0x00800807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010080",
+        "MSRValue": "0x3F802007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020122",
+        "MSRValue": "0x10002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0122",
+        "MSRValue": "0x08002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080001",
+        "MSRValue": "0x04002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020491",
+        "MSRValue": "0x01002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040001",
+        "MSRValue": "0x02002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400122",
+        "MSRValue": "0x00802007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010020",
+        "MSRValue": "0x3F800407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0490",
+        "MSRValue": "0x10000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020020",
+        "MSRValue": "0x08000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100122",
+        "MSRValue": "0x04000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200001",
+        "MSRValue": "0x01000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020080",
+        "MSRValue": "0x02000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040010",
+        "MSRValue": "0x00800407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080100",
+        "MSRValue": "0x3F801007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020490",
+        "MSRValue": "0x10001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000207F7",
+        "MSRValue": "0x08001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions missed L3 cache as data sources",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L3_MISS",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200100",
+        "MSRValue": "0x04001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020002",
+        "MSRValue": "0x01001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080028000",
+        "MSRValue": "0x02001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020491",
+        "MSRValue": "0x00801007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080120",
+        "MSRValue": "0x3F804007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0120",
+        "MSRValue": "0x00804007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0010",
+        "MSRValue": "0x01004007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020020",
+        "MSRValue": "0x3F800207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020100",
+        "MSRValue": "0x10000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core-originated cacheable demand requests missed L3",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL057",
-        "EventCode": "0x2E",
-        "EventName": "LONGEST_LAT_CACHE.MISS",
-        "PublicDescription": "Counts core-originated cacheable requests that miss the L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2. It does not include all misses to the L3.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x41"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200490",
+        "MSRValue": "0x08000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200080",
+        "MSRValue": "0x04000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080120",
+        "MSRValue": "0x01000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020010",
+        "MSRValue": "0x02000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0120",
+        "MSRValue": "0x00800207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020400",
+        "MSRValue": "0x0000010122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100400",
+        "MSRValue": "0x3F803C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C8000",
+        "MSRValue": "0x10003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0400",
+        "MSRValue": "0x08003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040120",
+        "MSRValue": "0x04003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0100",
+        "MSRValue": "0x01003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200002",
+        "MSRValue": "0x08007C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0490",
+        "MSRValue": "0x02003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200100",
+        "MSRValue": "0x00803C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01004007F7",
+        "MSRValue": "0x3F80080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080120",
+        "MSRValue": "0x1000080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
-        "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0491",
+        "MSRValue": "0x0800080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100100",
+        "MSRValue": "0x0400080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020100",
+        "MSRValue": "0x0100080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080010",
+        "MSRValue": "0x0200080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400010",
+        "MSRValue": "0x0080080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.NON_SILENT",
-        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040010",
+        "MSRValue": "0x3F80200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00804007F7",
+        "MSRValue": "0x1000200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0020",
+        "MSRValue": "0x0800200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100100",
+        "MSRValue": "0x0400200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "RFO requests that hit L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.RFO_HIT",
-        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100080",
+        "MSRValue": "0x0100200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200001",
+        "MSRValue": "0x0200200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020100",
+        "MSRValue": "0x0080200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400108000",
+        "MSRValue": "0x3F80040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00000107F7",
+        "MSRValue": "0x1000040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800807F7",
+        "MSRValue": "0x0800040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040004",
+        "MSRValue": "0x0400040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020001",
+        "MSRValue": "0x0100040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100122",
+        "MSRValue": "0x0200040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100122",
+        "MSRValue": "0x0080040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0001",
+        "MSRValue": "0x3F80100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080002",
+        "MSRValue": "0x1000100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040010",
+        "MSRValue": "0x0800100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200010",
+        "MSRValue": "0x0400100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100100",
+        "MSRValue": "0x0100100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200001",
+        "MSRValue": "0x0200100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080408000",
+        "MSRValue": "0x0080100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040400",
+        "MSRValue": "0x3F80400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040400",
+        "MSRValue": "0x0080400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080491",
+        "MSRValue": "0x0100400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0491",
+        "MSRValue": "0x3F80020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200080",
+        "MSRValue": "0x1000020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040122",
+        "MSRValue": "0x0800020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080088000",
+        "MSRValue": "0x0400020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040490",
+        "MSRValue": "0x0100020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0080",
+        "MSRValue": "0x0200020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100122",
+        "MSRValue": "0x0080020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020004",
+        "MSRValue": "0x0000010004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100080",
+        "MSRValue": "0x3F803C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200080",
+        "MSRValue": "0x10003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0002",
+        "MSRValue": "0x08003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080100",
+        "MSRValue": "0x04003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F801007F7",
+        "MSRValue": "0x01003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100400",
+        "MSRValue": "0x08007C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020400",
+        "MSRValue": "0x02003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040490",
+        "MSRValue": "0x00803C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100002",
+        "MSRValue": "0x3F80080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0002",
+        "MSRValue": "0x1000080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080048000",
+        "MSRValue": "0x0800080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L1D data line replacements",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x51",
-        "EventName": "L1D.REPLACEMENT",
-        "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020010",
+        "MSRValue": "0x0400080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0010",
+        "MSRValue": "0x0100080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200010",
+        "MSRValue": "0x0200080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080122",
+        "MSRValue": "0x0080080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200010",
+        "MSRValue": "0x3F80200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200122",
+        "MSRValue": "0x1000200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040490",
+        "MSRValue": "0x0800200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100002",
+        "MSRValue": "0x0400200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080491",
+        "MSRValue": "0x0100200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests that hit L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
-        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C07F7",
+        "MSRValue": "0x0200200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100010",
+        "MSRValue": "0x0080200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All retired load instructions.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.ALL_LOADS",
-        "PEBS": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x81"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200400",
+        "MSRValue": "0x3F80040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0080",
+        "MSRValue": "0x1000040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000108000",
+        "MSRValue": "0x0800040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020010",
+        "MSRValue": "0x0400040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080010",
+        "MSRValue": "0x0100040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040491",
+        "MSRValue": "0x0200040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800208000",
+        "MSRValue": "0x0080040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010010",
+        "MSRValue": "0x3F80100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020080",
+        "MSRValue": "0x1000100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080208000",
+        "MSRValue": "0x0800100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100002",
+        "MSRValue": "0x0400100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100020",
+        "MSRValue": "0x0100100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100020",
+        "MSRValue": "0x0200100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080100",
+        "MSRValue": "0x0080100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200002",
+        "MSRValue": "0x3F80400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100120",
+        "MSRValue": "0x0080400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200490",
+        "MSRValue": "0x0100400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0100",
+        "MSRValue": "0x3F80020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080491",
+        "MSRValue": "0x1000020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100122",
+        "MSRValue": "0x0800020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040004",
+        "MSRValue": "0x0400020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040100",
+        "MSRValue": "0x0100020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080020",
+        "MSRValue": "0x0200020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0001",
+        "MSRValue": "0x0080020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020080",
+        "MSRValue": "0x0000010001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080100",
+        "MSRValue": "0x3F803C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200010",
+        "MSRValue": "0x10003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80108000",
+        "MSRValue": "0x08003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0490",
+        "MSRValue": "0x04003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080490",
+        "MSRValue": "0x01003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000807F7",
+        "MSRValue": "0x08007C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020004",
+        "MSRValue": "0x02003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020002",
+        "MSRValue": "0x00803C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040400",
+        "MSRValue": "0x3F80080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
-        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080020",
+        "MSRValue": "0x1000080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0002",
+        "MSRValue": "0x0800080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0400",
+        "MSRValue": "0x0400080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200001",
+        "MSRValue": "0x0100080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200010",
+        "MSRValue": "0x0200080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010400",
+        "MSRValue": "0x0080080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000088000",
+        "MSRValue": "0x3F80200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0004",
+        "MSRValue": "0x1000200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
-        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200020",
+        "MSRValue": "0x0800200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080490",
+        "MSRValue": "0x0400200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080122",
+        "MSRValue": "0x0100200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400010",
+        "MSRValue": "0x0200200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040490",
+        "MSRValue": "0x0080200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040120",
+        "MSRValue": "0x3F80040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x41"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040080",
+        "MSRValue": "0x1000040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "6",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100491",
+        "MSRValue": "0x0800040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040100",
+        "MSRValue": "0x0400040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0122",
+        "MSRValue": "0x0100040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired store instructions that miss the STLB.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0200040001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x12"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400001",
+        "MSRValue": "0x0080040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "RFO requests to L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_RFO",
-        "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400120",
+        "MSRValue": "0x3F80100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C07F7",
+        "MSRValue": "0x1000100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0004",
+        "MSRValue": "0x0800100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100010",
+        "MSRValue": "0x0400100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080122",
+        "MSRValue": "0x0100100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040080",
+        "MSRValue": "0x0200100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0020",
+        "MSRValue": "0x0080100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0004",
+        "MSRValue": "0x3F80400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040491",
+        "MSRValue": "0x0080400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0080",
+        "MSRValue": "0x0100400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100120",
+        "MSRValue": "0x3F80020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0020",
+        "MSRValue": "0x1000020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100490",
+        "MSRValue": "0x0800020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C07F7",
+        "MSRValue": "0x0400020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040020",
+        "MSRValue": "0x0100020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01001007F7",
+        "MSRValue": "0x0200020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040122",
+        "MSRValue": "0x0080020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100028000",
+        "MSRValue": "0x0000010002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000407F7",
+        "MSRValue": "0x3F803C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020122",
+        "MSRValue": "0x10003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080490",
+        "MSRValue": "0x08003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080400",
+        "MSRValue": "0x04003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080004",
+        "MSRValue": "0x01003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0001",
+        "MSRValue": "0x08007C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100004",
+        "MSRValue": "0x02003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400491",
+        "MSRValue": "0x00803C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080004",
+        "MSRValue": "0x3F80080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020001",
+        "MSRValue": "0x1000080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200004",
+        "MSRValue": "0x0800080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400088000",
+        "MSRValue": "0x0400080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040010",
+        "MSRValue": "0x0100080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100400",
+        "MSRValue": "0x0200080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020400",
+        "MSRValue": "0x0080080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040100",
+        "MSRValue": "0x3F80200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100088000",
+        "MSRValue": "0x1000200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100491",
+        "MSRValue": "0x0800200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200080",
+        "MSRValue": "0x0400200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020020",
+        "MSRValue": "0x0100200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_PF",
-        "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xf8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200122",
+        "MSRValue": "0x0200200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100004",
+        "MSRValue": "0x0080200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080001",
+        "MSRValue": "0x3F80040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200400",
+        "MSRValue": "0x1000040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080491",
+        "MSRValue": "0x0800040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080490",
+        "MSRValue": "0x0400040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -5495,4482 +5750,4227 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080080",
+        "MSRValue": "0x0200040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200400",
+        "MSRValue": "0x0080040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L2 code requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_CODE_RD",
-        "PublicDescription": "Counts the total number of L2 code requests.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100010",
+        "MSRValue": "0x3F80100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020001",
+        "MSRValue": "0x1000100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080100",
+        "MSRValue": "0x0800100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0491",
+        "MSRValue": "0x0400100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040002",
+        "MSRValue": "0x0100100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand requests to L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
-        "PublicDescription": "Demand requests to L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe7"
-    },
-    {
-        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800207F7",
+        "MSRValue": "0x0200100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000407F7",
+        "MSRValue": "0x0080100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080490",
+        "MSRValue": "0x3F80400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100100",
+        "MSRValue": "0x0080400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L2 cache misses when fetching instructions",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.CODE_RD_MISS",
-        "PublicDescription": "Counts L2 cache misses when fetching instructions.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x24"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100080",
+        "MSRValue": "0x0100400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080120",
+        "MSRValue": "0x3F80020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040100",
+        "MSRValue": "0x1000020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080491",
+        "MSRValue": "0x0800020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0122",
+        "MSRValue": "0x0400020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200004",
+        "MSRValue": "0x0100020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000407F7",
+        "MSRValue": "0x0200020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100020",
+        "MSRValue": "0x0080020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_CODE_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000207F7",
+        "MSRValue": "0x0000018000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020122",
+        "MSRValue": "0x3F803C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040002",
+        "MSRValue": "0x10003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0100",
+        "MSRValue": "0x08003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040080",
+        "MSRValue": "0x04003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020490",
+        "MSRValue": "0x01003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100001",
+        "MSRValue": "0x08007C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040100",
+        "MSRValue": "0x02003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100490",
+        "MSRValue": "0x00803C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100004",
+        "MSRValue": "0x3F80088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core-originated cacheable demand requests that refer to L3",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL057",
-        "EventCode": "0x2E",
-        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
-        "PublicDescription": "Counts core-originated cacheable requests to the  L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4f"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040002",
+        "MSRValue": "0x1000088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0002",
+        "MSRValue": "0x0800088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080020",
+        "MSRValue": "0x0400088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020001",
+        "MSRValue": "0x0100088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000208000",
+        "MSRValue": "0x0200088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080020",
+        "MSRValue": "0x0080088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0122",
+        "MSRValue": "0x3F80208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200002",
+        "MSRValue": "0x1000208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400100",
+        "MSRValue": "0x0800208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040491",
+        "MSRValue": "0x0400208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions that miss the STLB.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
-        "PEBS": "1",
-        "SampleAfterValue": "100003",
-        "UMask": "0x11"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020100",
+        "MSRValue": "0x0100208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200122",
+        "MSRValue": "0x0200208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400010",
+        "MSRValue": "0x0080208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400080",
+        "MSRValue": "0x3F80048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0010",
+        "MSRValue": "0x1000048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200004",
+        "MSRValue": "0x0800048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with local Intel\u00ae Optane\u2122 DC persistent memory as the data source where the data request missed all caches. Precise event.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "ELLC": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.LOCAL_PMM",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with local Intel\u00ae Optane\u2122 DC persistent memory as the data source and the data request missed L3 (AppDirect or Memory Mode) and DRAM cache(Memory Mode). Precise event",
-        "SampleAfterValue": "100003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0002",
+        "MSRValue": "0x0400048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040010",
+        "MSRValue": "0x0100048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010491",
+        "MSRValue": "0x0200048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0400",
+        "MSRValue": "0x0080048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200120",
+        "MSRValue": "0x3F80108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100490",
+        "MSRValue": "0x1000108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Deprecated": "1",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.USELESS_PREF",
-        "SampleAfterValue": "200003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0122",
+        "MSRValue": "0x0800108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100491",
+        "MSRValue": "0x0400108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read miss L2, no rejects",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
-        "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x21"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080001",
+        "MSRValue": "0x0100108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020002",
+        "MSRValue": "0x0200108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
-        "PEBS": "1",
-        "SampleAfterValue": "20011",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800028000",
+        "MSRValue": "0x0080108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0080",
+        "MSRValue": "0x3F80408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0400",
+        "MSRValue": "0x0080408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All L2 requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.REFERENCES",
-        "PublicDescription": "All L2 requests.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xff"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100400",
+        "MSRValue": "0x0100408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020400",
+        "MSRValue": "0x3F80028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with L1D load Misses outstanding.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
-        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100020",
+        "MSRValue": "0x1000028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080108000",
+        "MSRValue": "0x0800028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080080",
+        "MSRValue": "0x0400028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100120",
+        "MSRValue": "0x0100028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0001",
+        "MSRValue": "0x0200028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040490",
+        "MSRValue": "0x0080028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020002",
+        "MSRValue": "0x0000010400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0120",
+        "MSRValue": "0x3F803C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080100",
+        "MSRValue": "0x10003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020120",
+        "MSRValue": "0x08003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040122",
+        "MSRValue": "0x04003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0491",
+        "MSRValue": "0x01003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C8000",
+        "MSRValue": "0x08007C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100491",
+        "MSRValue": "0x02003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0100",
+        "MSRValue": "0x00803C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02002007F7",
+        "MSRValue": "0x3F80080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200080",
+        "MSRValue": "0x1000080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400400",
+        "MSRValue": "0x0800080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020020",
+        "MSRValue": "0x0400080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020004",
+        "MSRValue": "0x0100080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00801007F7",
+        "MSRValue": "0x0200080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100100",
+        "MSRValue": "0x0080080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0010",
+        "MSRValue": "0x3F80200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0120",
+        "MSRValue": "0x1000200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020120",
+        "MSRValue": "0x0800200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100002",
+        "MSRValue": "0x0400200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200108000",
+        "MSRValue": "0x0100200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0080",
+        "MSRValue": "0x0200200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040120",
+        "MSRValue": "0x0080200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200491",
+        "MSRValue": "0x3F80040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080080",
+        "MSRValue": "0x1000040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020002",
+        "MSRValue": "0x0800040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200491",
+        "MSRValue": "0x0400040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400122",
+        "MSRValue": "0x0100040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800088000",
+        "MSRValue": "0x0200040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040122",
+        "MSRValue": "0x0080040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0490",
+        "MSRValue": "0x3F80100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01002007F7",
+        "MSRValue": "0x1000100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0400",
+        "MSRValue": "0x0800100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0491",
+        "MSRValue": "0x0400100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040002",
+        "MSRValue": "0x0100100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080002",
+        "MSRValue": "0x0200100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with locked access.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "UMask": "0x21"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0002",
+        "MSRValue": "0x0080100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0001",
+        "MSRValue": "0x3F80400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080100",
+        "MSRValue": "0x0080400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040020",
+        "MSRValue": "0x0100400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200400",
+        "MSRValue": "0x3F80020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All retired store instructions.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.ALL_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x82"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080400",
+        "MSRValue": "0x1000020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0001",
+        "MSRValue": "0x0800020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080004",
+        "MSRValue": "0x0400020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100120",
+        "MSRValue": "0x0100020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.",
-        "SampleAfterValue": "100007",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0200020400",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020491",
+        "MSRValue": "0x0080020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040004",
+        "MSRValue": "0x0000010010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100080",
+        "MSRValue": "0x3F803C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400120",
+        "MSRValue": "0x10003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040004",
+        "MSRValue": "0x08003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000207F7",
+        "MSRValue": "0x04003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020490",
+        "MSRValue": "0x01003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040490",
+        "MSRValue": "0x08007C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080002",
+        "MSRValue": "0x02003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100108000",
+        "MSRValue": "0x00803C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040400",
+        "MSRValue": "0x3F80080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200002",
+        "MSRValue": "0x1000080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040001",
+        "MSRValue": "0x0800080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080020",
+        "MSRValue": "0x0400080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0020",
+        "MSRValue": "0x0100080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080122",
+        "MSRValue": "0x0200080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040002",
+        "MSRValue": "0x0080080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000048000",
+        "MSRValue": "0x3F80200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000807F7",
+        "MSRValue": "0x1000200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020004",
+        "MSRValue": "0x0800200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020001",
+        "MSRValue": "0x0400200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
-        "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040491",
+        "MSRValue": "0x0100200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020010",
+        "MSRValue": "0x0200200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200100",
+        "MSRValue": "0x0080200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100080",
+        "MSRValue": "0x3F80040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040004",
+        "MSRValue": "0x1000040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040080",
+        "MSRValue": "0x0800040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040001",
+        "MSRValue": "0x0400040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020120",
+        "MSRValue": "0x0100040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000207F7",
+        "MSRValue": "0x0200040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100001",
+        "MSRValue": "0x0080040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080400",
+        "MSRValue": "0x3F80100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests sent to uncore",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
-        "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
+        "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x1000100010",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04001007F7",
+        "MSRValue": "0x0800100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0010",
+        "MSRValue": "0x0400100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200004",
+        "MSRValue": "0x0100100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040001",
+        "MSRValue": "0x0200100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0100",
+        "MSRValue": "0x0080100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100100",
+        "MSRValue": "0x3F80400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0010",
+        "MSRValue": "0x0080400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020490",
+        "MSRValue": "0x0100400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040004",
+        "MSRValue": "0x3F80020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200080",
+        "MSRValue": "0x1000020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200120",
+        "MSRValue": "0x0800020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions whose data sources was remote HITM",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions whose data sources was remote HITM.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080010",
+        "MSRValue": "0x0400020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020100",
+        "MSRValue": "0x0100020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040100",
+        "MSRValue": "0x0200020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000018000",
+        "MSRValue": "0x0080020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020020",
+        "MSRValue": "0x0000010020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200491",
+        "MSRValue": "0x3F803C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "RFO requests that miss L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.RFO_MISS",
-        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x22"
-    },
-    {
-        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.USELESS_HWPF",
-        "SampleAfterValue": "200003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100010",
+        "MSRValue": "0x10003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080010",
+        "MSRValue": "0x08003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.PF_HIT",
-        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xd8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0080",
+        "MSRValue": "0x04003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100020",
+        "MSRValue": "0x01003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020002",
+        "MSRValue": "0x08007C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0020",
+        "MSRValue": "0x02003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020004",
+        "MSRValue": "0x00803C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100490",
+        "MSRValue": "0x3F80080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020001",
+        "MSRValue": "0x1000080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cacheable and noncachaeble code read requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
-        "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400120",
+        "MSRValue": "0x0800080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100010",
+        "MSRValue": "0x0400080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040122",
+        "MSRValue": "0x0100080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020122",
+        "MSRValue": "0x0200080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100408000",
+        "MSRValue": "0x0080080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0122",
+        "MSRValue": "0x3F80200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200004",
+        "MSRValue": "0x1000200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80088000",
+        "MSRValue": "0x0800200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080004",
+        "MSRValue": "0x0400200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100001",
+        "MSRValue": "0x0100200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08002007F7",
+        "MSRValue": "0x0200200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100100",
+        "MSRValue": "0x0080200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020001",
+        "MSRValue": "0x3F80040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080080",
+        "MSRValue": "0x1000040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020002",
+        "MSRValue": "0x0800040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0120",
+        "MSRValue": "0x0400040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020004",
+        "MSRValue": "0x0100040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400100",
+        "MSRValue": "0x0200040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0020",
+        "MSRValue": "0x0080040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040020",
+        "MSRValue": "0x3F80100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020122",
+        "MSRValue": "0x1000100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040080",
+        "MSRValue": "0x0800100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080010",
+        "MSRValue": "0x0400100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040002",
+        "MSRValue": "0x0100100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80408000",
+        "MSRValue": "0x0200100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040120",
+        "MSRValue": "0x0080100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200122",
+        "MSRValue": "0x3F80400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200001",
+        "MSRValue": "0x0080400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100001",
+        "MSRValue": "0x0100400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C07F7",
+        "MSRValue": "0x3F80020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C07F7",
+        "MSRValue": "0x1000020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0002",
+        "MSRValue": "0x0800020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040490",
+        "MSRValue": "0x0400020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100004",
+        "MSRValue": "0x0100020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080001",
+        "MSRValue": "0x0200020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010120",
+        "MSRValue": "0x0080020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800407F7",
+        "MSRValue": "0x0000010080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080001",
+        "MSRValue": "0x3F803C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C07F7",
+        "MSRValue": "0x10003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020400",
+        "MSRValue": "0x08003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800807F7",
+        "MSRValue": "0x04003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020491",
+        "MSRValue": "0x01003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100004",
+        "MSRValue": "0x08007C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100400",
+        "MSRValue": "0x02003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.FB_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200120",
+        "MSRValue": "0x00803C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080010",
+        "MSRValue": "0x3F80080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080002",
+        "MSRValue": "0x1000080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080490",
+        "MSRValue": "0x0800080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100004",
+        "MSRValue": "0x0400080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080120",
+        "MSRValue": "0x0100080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020100",
+        "MSRValue": "0x0200080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800407F7",
+        "MSRValue": "0x0080080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040400",
+        "MSRValue": "0x3F80200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080020",
+        "MSRValue": "0x1000200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200208000",
+        "MSRValue": "0x0800200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020490",
+        "MSRValue": "0x0400200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200122",
+        "MSRValue": "0x0100200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080002",
+        "MSRValue": "0x0200200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0001",
+        "MSRValue": "0x0080200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200491",
+        "MSRValue": "0x3F80040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080490",
+        "MSRValue": "0x1000040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80048000",
+        "MSRValue": "0x0800040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020080",
+        "MSRValue": "0x0400040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0490",
+        "MSRValue": "0x0100040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L2_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions with L2 cache hits as data sources.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0200040080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0020",
+        "MSRValue": "0x0080040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200490",
+        "MSRValue": "0x3F80100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400020",
+        "MSRValue": "0x1000100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00802007F7",
+        "MSRValue": "0x0800100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L1D miss outstandings duration in cycles",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING",
-        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080002",
+        "MSRValue": "0x0400100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200004",
+        "MSRValue": "0x0100100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0004",
+        "MSRValue": "0x0200100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0002",
+        "MSRValue": "0x0080100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0120",
+        "MSRValue": "0x3F80400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100490",
+        "MSRValue": "0x0080400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200490",
+        "MSRValue": "0x0100400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200120",
+        "MSRValue": "0x3F80020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080400",
+        "MSRValue": "0x1000020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0120",
+        "MSRValue": "0x0800020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400400",
+        "MSRValue": "0x0400020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200120",
+        "MSRValue": "0x0100020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020120",
+        "MSRValue": "0x0200020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200002",
+        "MSRValue": "0x0080020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.ANY_RESPONSE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0490",
+        "MSRValue": "0x0000010100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0491",
+        "MSRValue": "0x3F803C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080491",
+        "MSRValue": "0x10003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0020",
+        "MSRValue": "0x08003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0490",
+        "MSRValue": "0x04003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0004",
+        "MSRValue": "0x01003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C07F7",
+        "MSRValue": "0x08007C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020010",
+        "MSRValue": "0x02003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100491",
+        "MSRValue": "0x00803C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80208000",
+        "MSRValue": "0x3F80080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000807F7",
+        "MSRValue": "0x1000080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0004",
+        "MSRValue": "0x0800080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C8000",
+        "MSRValue": "0x0400080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400004",
+        "MSRValue": "0x0100080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100080",
+        "MSRValue": "0x0200080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020020",
+        "MSRValue": "0x0080080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020120",
+        "MSRValue": "0x3F80200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400004",
+        "MSRValue": "0x1000200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400491",
+        "MSRValue": "0x0800200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10002007F7",
+        "MSRValue": "0x0400200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C8000",
+        "MSRValue": "0x0100200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080080",
+        "MSRValue": "0x0200200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020490",
+        "MSRValue": "0x0080200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100400",
+        "MSRValue": "0x3F80040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020400",
+        "MSRValue": "0x1000040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040020",
+        "MSRValue": "0x0800040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080122",
+        "MSRValue": "0x0400040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L1_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Demand and prefetch data reads",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
-        "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0100040100",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800048000",
+        "MSRValue": "0x0200040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100208000",
+        "MSRValue": "0x0080040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020080",
+        "MSRValue": "0x3F80100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0400",
+        "MSRValue": "0x1000100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200491",
+        "MSRValue": "0x0800100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C8000",
+        "MSRValue": "0x0400100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200002",
+        "MSRValue": "0x0100100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040122",
+        "MSRValue": "0x0200100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080491",
+        "MSRValue": "0x0080100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200491",
+        "MSRValue": "0x3F80400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100490",
+        "MSRValue": "0x0080400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040100",
+        "MSRValue": "0x0100400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C8000",
+        "MSRValue": "0x3F80020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F802007F7",
+        "MSRValue": "0x1000020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100001",
+        "MSRValue": "0x0800020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100122",
+        "MSRValue": "0x0400020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04002007F7",
+        "MSRValue": "0x0100020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.ANY_RESPONSE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010100",
+        "MSRValue": "0x0200020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080004",
+        "MSRValue": "0x0080020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of cache line split locks sent to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF4",
+        "EventName": "SQ_MISC.SPLIT_LOCK",
+        "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
index 00f4fcffa815..5d6b2e6fcb7b 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/clx-metrics.json
@@ -1,62 +1,5 @@
 [
     {
-        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Frontend_Bound",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Frontend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Bad_Speculation",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Bad_Speculation_SMT",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
-        "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Backend_Bound",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) )",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Backend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Retiring",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. "
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Retiring_SMT",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
         "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
         "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
@@ -71,49 +14,79 @@
     {
         "BriefDescription": "Instruction per taken branch",
         "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
-        "MetricGroup": "Branches;Fetch_BW;PGO",
+        "MetricGroup": "Branches;FetchBW;PGO",
         "MetricName": "IpTB"
     },
     {
         "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
-        "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)",
-        "MetricGroup": "Pipeline;Summary",
+        "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
+        "MetricGroup": "Pipeline",
         "MetricName": "CPI"
     },
     {
         "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.",
         "MetricExpr": "CPU_CLK_UNHALTED.THREAD",
-        "MetricGroup": "Summary",
+        "MetricGroup": "Pipeline",
         "MetricName": "CLKS"
     },
     {
-        "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * cycles",
-        "MetricGroup": "TopDownL1",
-        "MetricName": "SLOTS"
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC"
     },
     {
-        "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "TopDownL1_SMT",
-        "MetricName": "SLOTS_SMT"
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC_SMT"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Flops",
+        "MetricName": "FLOPc"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+        "MetricGroup": "Flops_SMT",
+        "MetricName": "FLOPc_SMT"
+    },
+    {
+        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
+        "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)",
+        "MetricGroup": "Pipeline;PortsUtil",
+        "MetricName": "ILP"
+    },
+    {
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "BrMispredicts",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
+        "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "SMT",
+        "MetricName": "CORE_CLKS"
     },
     {
         "BriefDescription": "Instructions per Load (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS",
-        "MetricGroup": "Instruction_Type",
+        "MetricGroup": "InsType",
         "MetricName": "IpLoad"
     },
     {
         "BriefDescription": "Instructions per Store (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES",
-        "MetricGroup": "Instruction_Type",
+        "MetricGroup": "InsType",
         "MetricName": "IpStore"
     },
     {
         "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "Branches;Instruction_Type",
+        "MetricGroup": "Branches;InsType",
         "MetricName": "IpBranch"
     },
     {
@@ -131,13 +104,13 @@
     {
         "BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
-        "MetricGroup": "FLOPS;FP_Arith;Instruction_Type",
+        "MetricGroup": "Flops;FpArith;InsType",
         "MetricName": "IpFLOP"
     },
     {
-        "BriefDescription": "Total number of retired Instructions",
+        "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
         "MetricExpr": "INST_RETIRED.ANY",
-        "MetricGroup": "Summary;TopDownL1",
+        "MetricGroup": "Summary;TmaL1",
         "MetricName": "Instructions"
     },
     {
@@ -149,164 +122,110 @@
     {
         "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
         "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
-        "MetricGroup": "DSB;Fetch_BW",
+        "MetricGroup": "DSB;FetchBW",
         "MetricName": "DSB_Coverage"
     },
     {
-        "BriefDescription": "Instructions Per Cycle (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / cycles",
-        "MetricGroup": "SMT;TopDownL1",
-        "MetricName": "CoreIPC"
-    },
-    {
-        "BriefDescription": "Instructions Per Cycle (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "SMT;TopDownL1",
-        "MetricName": "CoreIPC_SMT"
-    },
-    {
-        "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / cycles",
-        "MetricGroup": "FLOPS",
-        "MetricName": "FLOPc"
-    },
-    {
-        "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "FLOPS_SMT",
-        "MetricName": "FLOPc_SMT"
-    },
-    {
-        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
-        "MetricExpr": "UOPS_EXECUTED.THREAD / ( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 )",
-        "MetricGroup": "Pipeline;Ports_Utilization",
-        "MetricName": "ILP"
-    },
-    {
-        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per non-speculative branch misprediction (jeclear)",
-        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * cycles)) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts",
-        "MetricName": "Branch_Misprediction_Cost"
-    },
-    {
-        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per non-speculative branch misprediction (jeclear)",
-        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) * (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts_SMT",
-        "MetricName": "Branch_Misprediction_Cost_SMT"
-    },
-    {
-        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
-        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts",
-        "MetricName": "IpMispredict"
-    },
-    {
-        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
-        "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "SMT",
-        "MetricName": "CORE_CLKS"
-    },
-    {
         "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
         "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
-        "MetricGroup": "Memory_Bound;Memory_Lat",
+        "MetricGroup": "MemoryBound;MemoryLat",
         "MetricName": "Load_Miss_Real_Latency"
     },
     {
         "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
         "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
-        "MetricGroup": "Memory_Bound;Memory_BW",
+        "MetricGroup": "MemoryBound;MemoryBW",
         "MetricName": "MLP"
     },
     {
         "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
         "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * cycles )",
-        "MetricGroup": "TLB",
+        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CORE_CLKS )",
+        "MetricGroup": "MemoryTLB",
         "MetricName": "Page_Walks_Utilization"
     },
     {
-        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
-        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
-        "MetricGroup": "TLB_SMT",
-        "MetricName": "Page_Walks_Utilization_SMT"
-    },
-    {
         "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
         "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L1D_Cache_Fill_BW"
     },
     {
         "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
         "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L2_Cache_Fill_BW"
     },
     {
         "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
         "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L3_Cache_Fill_BW"
     },
     {
-        "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
+        "BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
         "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW;Offcore",
+        "MetricGroup": "MemoryBW;Offcore",
         "MetricName": "L3_Cache_Access_BW"
     },
     {
         "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L1MPKI"
     },
     {
         "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L2MPKI"
     },
     {
         "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
         "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses;Offcore",
+        "MetricGroup": "CacheMisses;Offcore",
         "MetricName": "L2MPKI_All"
     },
     {
         "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)",
         "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L2HPKI_All"
     },
     {
         "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L3MPKI"
     },
     {
         "BriefDescription": "Rate of silent evictions from the L2 cache per Kilo instruction where the evicted lines are dropped (no writeback to L3 or memory)",
         "MetricExpr": "1000 * L2_LINES_OUT.SILENT / INST_RETIRED.ANY",
-        "MetricGroup": "",
+        "MetricGroup": "L2Evicts;Server",
         "MetricName": "L2_Evictions_Silent_PKI"
     },
     {
         "BriefDescription": "Rate of non silent evictions from the L2 cache per Kilo instruction",
         "MetricExpr": "1000 * L2_LINES_OUT.NON_SILENT / INST_RETIRED.ANY",
-        "MetricGroup": "",
+        "MetricGroup": "L2Evicts;Server",
         "MetricName": "L2_Evictions_NonSilent_PKI"
     },
     {
         "BriefDescription": "Average CPU Utilization",
         "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
-        "MetricGroup": "Summary",
+        "MetricGroup": "HPC;Summary",
         "MetricName": "CPU_Utilization"
     },
     {
+        "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
+        "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time",
+        "MetricGroup": "Summary;Power",
+        "MetricName": "Average_Frequency"
+    },
+    {
         "BriefDescription": "Giga Floating Point Operations Per Second",
         "MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
-        "MetricGroup": "FLOPS;Summary",
+        "MetricGroup": "Flops;HPC",
         "MetricName": "GFLOPs"
     },
     {
@@ -317,62 +236,62 @@
     },
     {
         "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
-        "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 )",
-        "MetricGroup": "SMT;Summary",
+        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
+        "MetricGroup": "SMT",
         "MetricName": "SMT_2T_Utilization"
     },
     {
         "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "OS",
         "MetricName": "Kernel_Utilization"
     },
     {
         "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
-        "MetricExpr": "( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time",
-        "MetricGroup": "Memory_BW;SoC",
+        "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
+        "MetricGroup": "HPC;MemoryBW;SoC",
         "MetricName": "DRAM_BW_Use"
     },
     {
         "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
         "MetricExpr": "1000000000 * ( cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x35\\,umask\\=0x21\\,config\\=0x40433@ ) / ( cha_0@event\\=0x0@ / duration_time )",
-        "MetricGroup": "Memory_Lat;SoC",
+        "MetricGroup": "MemoryLat;SoC",
         "MetricName": "MEM_Read_Latency"
     },
     {
         "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
         "MetricExpr": "cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433\\,thresh\\=1@",
-        "MetricGroup": "Memory_BW;SoC",
+        "MetricGroup": "MemoryBW;SoC",
         "MetricName": "MEM_Parallel_Reads"
     },
     {
         "BriefDescription": "Average latency of data read request to external 3D X-Point memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches",
         "MetricExpr": "( 1000000000 * ( imc@event\\=0xe0\\,umask\\=0x1@ / imc@event\\=0xe3@ ) / imc_0@event\\=0x0@ )",
-        "MetricGroup": "Memory_Lat;SoC;Server",
+        "MetricGroup": "MemoryLat;SoC;Server",
         "MetricName": "MEM_PMM_Read_Latency"
     },
     {
         "BriefDescription": "Average 3DXP Memory Bandwidth Use for reads [GB / sec]",
         "MetricExpr": "( ( 64 * imc@event\\=0xe3@ / 1000000000 ) / duration_time )",
-        "MetricGroup": "Memory_BW;SoC;Server",
+        "MetricGroup": "MemoryBW;SoC;Server",
         "MetricName": "PMM_Read_BW"
     },
     {
         "BriefDescription": "Average 3DXP Memory Bandwidth Use for Writes [GB / sec]",
         "MetricExpr": "( ( 64 * imc@event\\=0xe7@ / 1000000000 ) / duration_time )",
-        "MetricGroup": "Memory_BW;SoC;Server",
+        "MetricGroup": "MemoryBW;SoC;Server",
         "MetricName": "PMM_Write_BW"
     },
     {
         "BriefDescription": "Average IO (network or disk) Bandwidth Use for Writes [GB / sec]",
         "MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3 ) * 4 / 1000000000 / duration_time",
-        "MetricGroup": "IO_BW;SoC;Server",
+        "MetricGroup": "IoBW;SoC;Server",
         "MetricName": "IO_Write_BW"
     },
     {
         "BriefDescription": "Average IO (network or disk) Bandwidth Use for Reads [GB / sec]",
         "MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 ) * 4 / 1000000000 / duration_time",
-        "MetricGroup": "IO_BW;SoC;Server",
+        "MetricGroup": "IoBW;SoC;Server",
         "MetricName": "IO_Read_BW"
     },
     {
@@ -383,7 +302,7 @@
     },
     {
         "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]",
-        "MetricExpr": "INST_RETIRED.ANY / ( BR_INST_RETIRED.FAR_BRANCH / 2 )",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u",
         "MetricGroup": "Branches;OS",
         "MetricName": "IpFarBranch"
     },
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/floating-point.json b/tools/perf/pmu-events/arch/x86/cascadelakex/floating-point.json
index 3c0b95fd60ad..ade925d7a68c 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/floating-point.json
@@ -1,12 +1,12 @@
 [
     {
-        "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT14 RCP14 DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x4"
     },
     {
         "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
@@ -18,13 +18,13 @@
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
+        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x10"
     },
     {
         "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
@@ -36,13 +36,13 @@
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x40"
     },
     {
         "BriefDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
@@ -54,32 +54,32 @@
         "UMask": "0x80"
     },
     {
-        "BriefDescription": "Cycles with any input/output SSE or FP assist",
+        "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xCA",
-        "EventName": "FP_ASSIST.ANY",
-        "PublicDescription": "Counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1e"
+        "EventCode": "0xC7",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT14 RCP14 DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Cycles with any input/output SSE or FP assist",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "CounterMask": "1",
+        "EventCode": "0xCA",
+        "EventName": "FP_ASSIST.ANY",
+        "PublicDescription": "Counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1e"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/frontend.json b/tools/perf/pmu-events/arch/x86/cascadelakex/frontend.json
index 0716b2e3ff75..078706a50091 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/frontend.json
@@ -1,210 +1,125 @@
 [
     {
-        "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
-        "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0xE6",
+        "EventName": "BACLEARS.ANY",
+        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.L2_MISS",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x13",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.COUNT",
+        "PublicDescription": "This event counts the number of the Decode Stream Buffer (DSB)-to-MITE switches including all misses because of missing Decode Stream Buffer (DSB) cache and u-arch forced misses.\nNote: Invoking MITE requires two or three cycles delay.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_MITE_UOPS",
-        "PublicDescription": "Counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
+        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2",
+        "EventName": "FRONTEND_RETIRED.DSB_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x200206",
+        "MSRValue": "0x11",
         "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3",
+        "EventName": "FRONTEND_RETIRED.ITLB_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x300206",
+        "MSRValue": "0x14",
         "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
+        "EventName": "FRONTEND_RETIRED.L1I_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x100206",
+        "MSRValue": "0x12",
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
-        "Invert": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_UOPS",
-        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x30"
-    },
-    {
-        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
+        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.L1I_MISS",
+        "EventName": "FRONTEND_RETIRED.L2_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x12",
+        "MSRValue": "0x13",
         "PEBS": "1",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
+        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
-        "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400106",
+        "PEBS": "2",
+        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.DSB_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.DSB_MISS",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x11",
+        "MSRValue": "0x408006",
         "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MITE_UOPS",
-        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x30"
-    },
-    {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MITE_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
-        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAB",
-        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
-        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x400806",
+        "MSRValue": "0x401006",
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
@@ -223,93 +138,96 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x400406",
+        "MSRValue": "0x410006",
         "PEBS": "1",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_DSB_CYCLES",
-        "PublicDescription": "Counts cycles during which uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAB",
-        "EventName": "DSB2MITE_SWITCHES.COUNT",
-        "PublicDescription": "This event counts the number of the Decode Stream Buffer (DSB)-to-MITE switches including all misses because of missing Decode Stream Buffer (DSB) cache and u-arch forced misses.\nNote: Invoking MITE requires two or three cycles delay.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x100206",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
-        "Counter": "0,1,2,3,4,5,6,7",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xc6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x400106",
-        "PEBS": "2",
-        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
+        "MSRValue": "0x200206",
+        "PEBS": "1",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x83",
-        "EventName": "ICACHE_64B.IFTAG_MISS",
-        "SampleAfterValue": "200003",
-        "UMask": "0x2"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x300206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x408006",
+        "MSRValue": "0x402006",
         "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
-        "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400406",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x83",
-        "EventName": "ICACHE_64B.IFTAG_HIT",
-        "SampleAfterValue": "200003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x420006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
@@ -326,38 +244,29 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.STLB_MISS",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x15",
+        "MSRValue": "0x400806",
         "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.DSB_UOPS",
-        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
+        "EventName": "FRONTEND_RETIRED.STLB_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x410006",
+        "MSRValue": "0x15",
         "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
@@ -373,6 +282,66 @@
         "UMask": "0x4"
     },
     {
+        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_HIT",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_MISS",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_STALL",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS",
+        "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Cycles MITE is delivering 4 Uops",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x24"
+    },
+    {
         "BriefDescription": "Cycles MITE is delivering any Uop",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -384,53 +353,78 @@
         "UMask": "0x24"
     },
     {
-        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xE6",
-        "EventName": "BACLEARS.ANY",
-        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x401006",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
-        "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x402006",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_DSB_CYCLES",
+        "PublicDescription": "Counts cycles during which uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_MITE_UOPS",
+        "PublicDescription": "Counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
         "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer",
@@ -445,72 +439,78 @@
         "UMask": "0x30"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.ITLB_MISS",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x14",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_UOPS",
+        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
+        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
+        "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.ALL_DSB_CYCLES_ANY_UOPS",
-        "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "CounterMask": "4",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x18"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Counts cycles FE delivered 4 uops or Resource Allocation Table (RAT) was stalling FE.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x420006",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles MITE is delivering 4 Uops",
+        "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0x79",
-        "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
-        "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "CounterMask": "3",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x24"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
+        "BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0x79",
-        "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
-        "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "CounterMask": "2",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x18"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
+        "BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x83",
-        "EventName": "ICACHE_64B.IFTAG_STALL",
-        "SampleAfterValue": "200003",
-        "UMask": "0x4"
+        "CounterMask": "1",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/memory.json b/tools/perf/pmu-events/arch/x86/cascadelakex/memory.json
index 0c07cb4fbf58..7c2adadca87e 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/memory.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/memory.json
@@ -1,1338 +1,1358 @@
 [
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Cycles while L3 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x06040007F7",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L3_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "6",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED",
+        "PEBS": "1",
+        "PublicDescription": "Number of times HLE abort was triggered.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to unfriendly events (such as interrupts).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_EVENTS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_MEM",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to incompatible memory type",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_MEMTYPE",
+        "PublicDescription": "Number of times an HLE execution aborted due to incompatible memory type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to hardware timer expiration.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_TIMER",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution successfully committed",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.COMMIT",
+        "PublicDescription": "Number of times HLE commit succeeded.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution started.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.START",
+        "PublicDescription": "Number of times we entered an HLE region. Does not count nested transactions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL089",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
+        "PublicDescription": "Counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from one of the following:a. memory disambiguation,b. external snoop, orc. cross SMT-HW-thread snoop (stores) hitting load buffer.",
         "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x80",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "1009",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x10",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "20011",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000100",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x100",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "503",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000490",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x20",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000020",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x4",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.  Reported latency may be longer than just the memory latency.",
         "SampleAfterValue": "100003",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x200",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "101",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x40",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "2003",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x8",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "50021",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000100",
+        "MSRValue": "0x3FBC000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000400",
+        "MSRValue": "0x103C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000490",
+        "MSRValue": "0x083C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000010",
+        "MSRValue": "0x043C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00490",
+        "MSRValue": "0x013C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000120",
+        "MSRValue": "0x103FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000100",
+        "MSRValue": "0x083FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000100",
+        "MSRValue": "0x023C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000100",
+        "MSRValue": "0x00BC000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804008000",
+        "MSRValue": "0x3F84000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x06040007F7",
+        "MSRValue": "0x1004000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000491",
+        "MSRValue": "0x0804000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000010",
+        "MSRValue": "0x0404000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000080",
+        "MSRValue": "0x0104000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000010",
+        "MSRValue": "0x0204000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01040007F7",
+        "MSRValue": "0x0604000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000400",
+        "MSRValue": "0x0084000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000004",
+        "MSRValue": "0x063B800491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000010",
+        "MSRValue": "0x3F90000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000491",
+        "MSRValue": "0x1010000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_MEM",
-        "PublicDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000010",
+        "MSRValue": "0x0810000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10040007F7",
+        "MSRValue": "0x0410000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000002",
+        "MSRValue": "0x0110000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000004",
+        "MSRValue": "0x0210000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000400",
+        "MSRValue": "0x0090000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000120",
+        "MSRValue": "0x3FBC000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08100007F7",
+        "MSRValue": "0x103C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000100",
+        "MSRValue": "0x083C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000120",
+        "MSRValue": "0x043C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000020",
+        "MSRValue": "0x013C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000020",
+        "MSRValue": "0x103FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000400",
+        "MSRValue": "0x083FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000120",
+        "MSRValue": "0x023C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000002",
+        "MSRValue": "0x00BC000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000020",
+        "MSRValue": "0x3F84000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410008000",
+        "MSRValue": "0x1004000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000002",
+        "MSRValue": "0x0804000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800002",
+        "MSRValue": "0x0404000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F840007F7",
+        "MSRValue": "0x0104000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000491",
+        "MSRValue": "0x0204000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000400",
+        "MSRValue": "0x0604000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000004",
+        "MSRValue": "0x0084000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000100",
+        "MSRValue": "0x063B800490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000490",
+        "MSRValue": "0x3F90000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000004",
+        "MSRValue": "0x1010000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000010",
+        "MSRValue": "0x0810000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000100",
+        "MSRValue": "0x0410000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a HLE transactional region aborted due to a non XRELEASE prefixed instruction writing to an elided lock in the elision buffer",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_STORE_TO_ELIDED_LOCK",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to a non-release/commit store to lock.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000004",
+        "MSRValue": "0x0110000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000020",
+        "MSRValue": "0x0210000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_CONFLICT",
-        "PublicDescription": "Number of times a TSX line had a cache conflict.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000400",
+        "MSRValue": "0x0090000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000120",
+        "MSRValue": "0x3FBC000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000002",
+        "MSRValue": "0x103C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000004",
+        "MSRValue": "0x083C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800100",
+        "MSRValue": "0x043C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000120",
+        "MSRValue": "0x013C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000122",
+        "MSRValue": "0x103FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000122",
+        "MSRValue": "0x083FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104008000",
+        "MSRValue": "0x023C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC5",
-        "PublicDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts the number of times a XBEGIN instruction was executed inside an HLE transactional region.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC4",
-        "PublicDescription": "RTM region detected inside HLE.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts the number of times an instruction execution caused the transactional nest count supported to be exceeded",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC3",
-        "PublicDescription": "Unfriendly TSX abort triggered by a nest count that is too deep.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts the number of times a class of instructions (e.g., vzeroupper) that may cause a transactional abort was executed inside a transactional region",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC2",
-        "PublicDescription": "Unfriendly TSX abort triggered by a vzeroupper instruction.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000122",
+        "MSRValue": "0x00BC000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000002",
+        "MSRValue": "0x3F84000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00490",
+        "MSRValue": "0x1004000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800010",
+        "MSRValue": "0x0804000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000400",
+        "MSRValue": "0x0404000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000400",
+        "MSRValue": "0x0104000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000001",
+        "MSRValue": "0x0204000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000010",
+        "MSRValue": "0x0604000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00490",
+        "MSRValue": "0x0084000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800122",
+        "MSRValue": "0x063B800120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000400",
+        "MSRValue": "0x3F90000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000020",
+        "MSRValue": "0x1010000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000400",
+        "MSRValue": "0x0810000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B8007F7",
+        "MSRValue": "0x0410000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000491",
+        "MSRValue": "0x0110000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000001",
+        "MSRValue": "0x0210000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000002",
+        "MSRValue": "0x0090000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.ANY_SNOOP OCR.ALL_READS.L3_MISS.ANY_SNOOP OCR.ALL_READS.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00840007F7",
+        "MSRValue": "0x3FBC0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000490",
+        "MSRValue": "0x103C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000100",
+        "MSRValue": "0x083C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10100007F7",
+        "MSRValue": "0x043C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000004",
+        "MSRValue": "0x013C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to uncommon conditions.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_TIMER",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.REMOTE_HITM OCR.ALL_READS.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000002",
+        "MSRValue": "0x103FC007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00004",
+        "MSRValue": "0x083FC007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.SNOOP_MISS OCR.ALL_READS.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000002",
+        "MSRValue": "0x023C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS.SNOOP_NONE OCR.ALL_READS.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F900007F7",
+        "MSRValue": "0x00BC0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000100",
+        "MSRValue": "0x3F840007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000010",
+        "MSRValue": "0x10040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000001",
+        "MSRValue": "0x08040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -1352,360 +1372,338 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000010",
+        "MSRValue": "0x01040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000004",
+        "MSRValue": "0x02040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000010",
+        "MSRValue": "0x06040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000002",
+        "MSRValue": "0x00840007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000080",
+        "MSRValue": "0x063B8007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00490",
+        "MSRValue": "0x3F900007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000004",
+        "MSRValue": "0x10100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000004",
+        "MSRValue": "0x08100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000080",
+        "MSRValue": "0x04100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000400",
+        "MSRValue": "0x01100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000080",
+        "MSRValue": "0x02100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000010",
+        "MSRValue": "0x00900007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.ANY_SNOOP OCR.ALL_RFO.L3_MISS.ANY_SNOOP OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000400",
+        "MSRValue": "0x3FBC000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000004",
+        "MSRValue": "0x103C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00400",
+        "MSRValue": "0x083C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000100",
+        "MSRValue": "0x043C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution successfully committed",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.COMMIT",
-        "PublicDescription": "Number of times HLE commit succeeded.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000122",
+        "MSRValue": "0x013C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.REMOTE_HITM OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000002",
+        "MSRValue": "0x103FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000002",
+        "MSRValue": "0x083FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.SNOOP_MISS OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000491",
+        "MSRValue": "0x023C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS.SNOOP_NONE OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000010",
+        "MSRValue": "0x00BC000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000491",
+        "MSRValue": "0x3F84000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000001",
+        "MSRValue": "0x1004000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000010",
+        "MSRValue": "0x0804000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00100",
+        "MSRValue": "0x0404000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000490",
+        "MSRValue": "0x0104000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -1725,389 +1723,375 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000002",
+        "MSRValue": "0x0604000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000080",
+        "MSRValue": "0x0084000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000100",
+        "MSRValue": "0x063B800122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.SNOOP_MISS OCR.ALL_READS.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C0007F7",
+        "MSRValue": "0x3F90000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000004",
+        "MSRValue": "0x1010000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00122",
+        "MSRValue": "0x0810000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C0007F7",
+        "MSRValue": "0x0410000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000120",
+        "MSRValue": "0x0110000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00020",
+        "MSRValue": "0x0210000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84008000",
+        "MSRValue": "0x0090000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000002",
+        "MSRValue": "0x3FBC000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000004",
+        "MSRValue": "0x103C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000120",
+        "MSRValue": "0x083C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000122",
+        "MSRValue": "0x043C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000080",
+        "MSRValue": "0x013C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000004",
+        "MSRValue": "0x103FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000010",
+        "MSRValue": "0x083FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800490",
+        "MSRValue": "0x023C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000490",
+        "MSRValue": "0x00BC000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110008000",
+        "MSRValue": "0x3F84000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800100",
+        "MSRValue": "0x1004000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC008000",
+        "MSRValue": "0x0804000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000122",
+        "MSRValue": "0x0404000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00080",
+        "MSRValue": "0x0104000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00002",
+        "MSRValue": "0x0204000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000020",
+        "MSRValue": "0x0604000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000120",
+        "MSRValue": "0x0084000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F840007F7",
+        "MSRValue": "0x063B800004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
         "MSRValue": "0x3F90000004",
         "Offcore": "1",
@@ -2116,1002 +2100,949 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C0007F7",
+        "MSRValue": "0x1010000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000122",
+        "MSRValue": "0x0810000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000490",
+        "MSRValue": "0x0410000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000001",
+        "MSRValue": "0x0110000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00491",
+        "MSRValue": "0x0210000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10040007F7",
+        "MSRValue": "0x0090000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C0007F7",
+        "MSRValue": "0x3FBC000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000002",
+        "MSRValue": "0x103C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004008000",
+        "MSRValue": "0x083C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x80",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "1009",
-        "TakenAlone": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x043C000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C0007F7",
+        "MSRValue": "0x013C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times HLE lock could not be elided due to ElisionBufferAvailable being zero.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.HLE_ELISION_BUFFER_FULL",
-        "PublicDescription": "Number of times we could not allocate Lock Buffer.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204008000",
+        "MSRValue": "0x103FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000010",
+        "MSRValue": "0x083FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000491",
+        "MSRValue": "0x023C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000020",
+        "MSRValue": "0x00BC000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000122",
+        "MSRValue": "0x3F84000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000400",
+        "MSRValue": "0x1004000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000122",
+        "MSRValue": "0x0804000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000491",
+        "MSRValue": "0x0404000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000120",
+        "MSRValue": "0x0104000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000490",
+        "MSRValue": "0x0204000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000490",
+        "MSRValue": "0x0604000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000490",
+        "MSRValue": "0x0084000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000002",
+        "MSRValue": "0x063B800001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000491",
+        "MSRValue": "0x3F90000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000080",
+        "MSRValue": "0x1010000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000491",
+        "MSRValue": "0x0810000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000100",
+        "MSRValue": "0x0410000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000120",
+        "MSRValue": "0x0110000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000120",
+        "MSRValue": "0x0210000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC008000",
+        "MSRValue": "0x0090000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000100",
+        "MSRValue": "0x3FBC000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000002",
+        "MSRValue": "0x103C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090008000",
+        "MSRValue": "0x083C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000122",
+        "MSRValue": "0x043C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000490",
+        "MSRValue": "0x013C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000122",
+        "MSRValue": "0x103FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000080",
+        "MSRValue": "0x083FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000490",
+        "MSRValue": "0x023C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000120",
+        "MSRValue": "0x00BC000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000490",
+        "MSRValue": "0x3F84000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000001",
+        "MSRValue": "0x1004000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000120",
+        "MSRValue": "0x0804000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000001",
+        "MSRValue": "0x0404000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
-        "PublicDescription": "Number of times an RTM execution aborted due to incompatible memory type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000120",
+        "MSRValue": "0x0104000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000490",
+        "MSRValue": "0x0204000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00010",
+        "MSRValue": "0x0604000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000122",
+        "MSRValue": "0x0084000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00900007F7",
+        "MSRValue": "0x063B800002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000010",
+        "MSRValue": "0x3F90000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000400",
+        "MSRValue": "0x1010000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02040007F7",
+        "MSRValue": "0x0810000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000122",
+        "MSRValue": "0x0410000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000001",
+        "MSRValue": "0x0110000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000080",
+        "MSRValue": "0x0210000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00122",
+        "MSRValue": "0x0090000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.ANY_SNOOP OCR.OTHER.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000010",
+        "MSRValue": "0x3FBC008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HITM_OTHER_CORE OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B8007F7",
+        "MSRValue": "0x103C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000122",
+        "MSRValue": "0x083C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000010",
+        "MSRValue": "0x043C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000020",
+        "MSRValue": "0x013C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000002",
+        "MSRValue": "0x103FC08000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000004",
+        "MSRValue": "0x083FC08000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.OTHER.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000490",
+        "MSRValue": "0x023C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800080",
+        "MSRValue": "0x00BC008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000122",
+        "MSRValue": "0x3F84008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000100",
+        "MSRValue": "0x1004008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404008000",
+        "MSRValue": "0x0804008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000100",
+        "MSRValue": "0x0404008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000490",
+        "MSRValue": "0x0104008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000001",
+        "MSRValue": "0x0204008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000400",
+        "MSRValue": "0x0604008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000100",
+        "MSRValue": "0x0084008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -3131,1426 +3062,1326 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to NoAllocatedElisionBuffer being non-zero.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_NOT_EMPTY",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084008000",
+        "MSRValue": "0x3F90008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000001",
+        "MSRValue": "0x1010008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000100",
+        "MSRValue": "0x0810008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000002",
+        "MSRValue": "0x0410008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000491",
+        "MSRValue": "0x0110008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000120",
+        "MSRValue": "0x0210008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000490",
+        "MSRValue": "0x0090008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000001",
+        "MSRValue": "0x3FBC000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000004",
+        "MSRValue": "0x103C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000491",
+        "MSRValue": "0x083C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000490",
+        "MSRValue": "0x043C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000010",
+        "MSRValue": "0x013C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC007F7",
+        "MSRValue": "0x103FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604008000",
+        "MSRValue": "0x083FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000010",
+        "MSRValue": "0x023C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000002",
+        "MSRValue": "0x00BC000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC007F7",
+        "MSRValue": "0x3F84000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000001",
+        "MSRValue": "0x1004000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000122",
+        "MSRValue": "0x0804000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000080",
+        "MSRValue": "0x0404000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000100",
+        "MSRValue": "0x0104000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000004",
+        "MSRValue": "0x0204000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000491",
+        "MSRValue": "0x0604000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000002",
+        "MSRValue": "0x0084000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B808000",
+        "MSRValue": "0x063B800400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000002",
+        "MSRValue": "0x3F90000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000002",
+        "MSRValue": "0x1010000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000010",
+        "MSRValue": "0x0810000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000490",
+        "MSRValue": "0x0410000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC08000",
+        "MSRValue": "0x0110000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800002",
+        "MSRValue": "0x0210000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000020",
+        "MSRValue": "0x0090000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000001",
+        "MSRValue": "0x3FBC000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000002",
+        "MSRValue": "0x103C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000120",
+        "MSRValue": "0x083C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10100007F7",
+        "MSRValue": "0x043C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000400",
+        "MSRValue": "0x013C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000100",
+        "MSRValue": "0x103FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000002",
+        "MSRValue": "0x083FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000002",
+        "MSRValue": "0x023C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00080",
+        "MSRValue": "0x00BC000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08040007F7",
+        "MSRValue": "0x3F84000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000100",
+        "MSRValue": "0x1004000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000400",
+        "MSRValue": "0x0804000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000020",
+        "MSRValue": "0x0404000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90008000",
+        "MSRValue": "0x0104000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00491",
+        "MSRValue": "0x0204000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000004",
+        "MSRValue": "0x0604000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410008000",
+        "MSRValue": "0x0084000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000004",
+        "MSRValue": "0x063B800010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000120",
+        "MSRValue": "0x3F90000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000001",
+        "MSRValue": "0x1010000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01100007F7",
+        "MSRValue": "0x0810000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000001",
+        "MSRValue": "0x0410000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000010",
+        "MSRValue": "0x0110000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000080",
+        "MSRValue": "0x0210000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804008000",
+        "MSRValue": "0x0090000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000001",
+        "MSRValue": "0x3FBC000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000020",
+        "MSRValue": "0x103C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000080",
+        "MSRValue": "0x083C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000490",
+        "MSRValue": "0x043C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000020",
+        "MSRValue": "0x013C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000100",
+        "MSRValue": "0x103FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000001",
+        "MSRValue": "0x083FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000100",
+        "MSRValue": "0x023C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000100",
+        "MSRValue": "0x00BC000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
-        "PublicDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000120",
+        "MSRValue": "0x3F84000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000020",
+        "MSRValue": "0x1004000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000080",
+        "MSRValue": "0x0804000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000080",
+        "MSRValue": "0x0404000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000002",
+        "MSRValue": "0x0104000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000080",
+        "MSRValue": "0x0204000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000490",
+        "MSRValue": "0x0604000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000120",
+        "MSRValue": "0x0084000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000004",
+        "MSRValue": "0x063B800020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.ANY_SNOOP OCR.ALL_READS.L3_MISS.ANY_SNOOP OCR.ALL_READS.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC0007F7",
+        "MSRValue": "0x3F90000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000490",
+        "MSRValue": "0x1010000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00400",
+        "MSRValue": "0x0810000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000020",
+        "MSRValue": "0x0410000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000002",
+        "MSRValue": "0x0110000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED",
-        "PEBS": "1",
-        "PublicDescription": "Number of times RTM abort was triggered.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000020",
+        "MSRValue": "0x0210000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000490",
+        "MSRValue": "0x0090000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000020",
+        "MSRValue": "0x3FBC000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000020",
+        "MSRValue": "0x103C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000100",
+        "MSRValue": "0x083C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010008000",
+        "MSRValue": "0x043C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000491",
+        "MSRValue": "0x013C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800490",
+        "MSRValue": "0x103FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000100",
+        "MSRValue": "0x083FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000080",
+        "MSRValue": "0x023C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000020",
+        "MSRValue": "0x00BC000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000001",
+        "MSRValue": "0x3F84000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000490",
+        "MSRValue": "0x1004000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000010",
+        "MSRValue": "0x0804000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL089",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
-        "PublicDescription": "Counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from one of the following:a. memory disambiguation,b. external snoop, orc. cross SMT-HW-thread snoop (stores) hitting load buffer.",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0404000080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to XRELEASE lock not satisfying the address and value requirements in the elision buffer",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_MISMATCH",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to release/commit but data and address mismatch.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000010",
+        "MSRValue": "0x0104000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000020",
+        "MSRValue": "0x0204000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000002",
+        "MSRValue": "0x0604000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000080",
+        "MSRValue": "0x0084000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000010",
+        "MSRValue": "0x063B800080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000122",
+        "MSRValue": "0x3F90000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000122",
+        "MSRValue": "0x1010000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -4570,52 +4401,50 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000001",
+        "MSRValue": "0x0410000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810008000",
+        "MSRValue": "0x0110000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00122",
+        "MSRValue": "0x0210000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
         "MSRValue": "0x0090000080",
         "Offcore": "1",
@@ -4624,526 +4453,544 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000020",
+        "MSRValue": "0x3FBC000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000002",
+        "MSRValue": "0x103C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C0007F7",
+        "MSRValue": "0x083C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000001",
+        "MSRValue": "0x043C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_EVENTS",
-        "PublicDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04100007F7",
+        "MSRValue": "0x013C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000120",
+        "MSRValue": "0x103FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000001",
+        "MSRValue": "0x083FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.SNOOP_MISS OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000122",
+        "MSRValue": "0x023C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110008000",
+        "MSRValue": "0x00BC000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010008000",
+        "MSRValue": "0x3F84000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000400",
+        "MSRValue": "0x1004000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "6",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x6"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000122",
+        "MSRValue": "0x0804000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000400",
+        "MSRValue": "0x0404000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000100",
+        "MSRValue": "0x0104000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000001",
+        "MSRValue": "0x0204000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00400",
+        "MSRValue": "0x0604000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000400",
+        "MSRValue": "0x0084000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204008000",
+        "MSRValue": "0x063B800100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090008000",
+        "MSRValue": "0x3F90000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08100007F7",
+        "MSRValue": "0x1010000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000004",
+        "MSRValue": "0x0810000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000491",
+        "MSRValue": "0x0410000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00002",
+        "MSRValue": "0x0110000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000004",
+        "MSRValue": "0x0210000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800122",
+        "MSRValue": "0x0090000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "Demand Data Read requests who miss L3 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
+        "PublicDescription": "Demand Data Read requests who miss L3 cache.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts number of Offcore outstanding Demand Data Read requests that miss L3 cache in the superQ every cycle.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "6",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD_GE_6",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC007F7",
+        "MSRValue": "0x3FBC000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000122",
+        "MSRValue": "0x103C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000100",
+        "MSRValue": "0x083C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000004",
+        "MSRValue": "0x043C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000120",
+        "MSRValue": "0x013C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02100007F7",
+        "MSRValue": "0x103FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.REMOTE_HITM OCR.ALL_READS.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC007F7",
+        "MSRValue": "0x083FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000490",
+        "MSRValue": "0x023C000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000100",
+        "MSRValue": "0x00BC000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000004",
+        "MSRValue": "0x3F84000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000490",
+        "MSRValue": "0x1004000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000491",
+        "MSRValue": "0x0804000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
         "MSRValue": "0x0404000491",
         "Offcore": "1",
@@ -5152,2707 +4999,2702 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00002",
+        "MSRValue": "0x0104000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to hardware timer expiration.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_TIMER",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.REMOTE_HITM OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00122",
+        "MSRValue": "0x0204000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000491",
+        "MSRValue": "0x0604000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00080",
+        "MSRValue": "0x0084000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800004",
+        "MSRValue": "0x063B800491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000490",
+        "MSRValue": "0x3F90000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90008000",
+        "MSRValue": "0x1010000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000490",
+        "MSRValue": "0x0810000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000010",
+        "MSRValue": "0x0410000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000020",
+        "MSRValue": "0x0110000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000001",
+        "MSRValue": "0x0210000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000100",
+        "MSRValue": "0x0090000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C008000",
+        "MSRValue": "0x3FBC000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000400",
+        "MSRValue": "0x103C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800491",
+        "MSRValue": "0x083C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000020",
+        "MSRValue": "0x043C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604008000",
+        "MSRValue": "0x013C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000100",
+        "MSRValue": "0x103FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x20",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000080",
+        "MSRValue": "0x083FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000122",
+        "MSRValue": "0x023C000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000020",
+        "MSRValue": "0x00BC000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00080",
+        "MSRValue": "0x3F84000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000004",
+        "MSRValue": "0x1004000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000080",
+        "MSRValue": "0x0804000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000122",
+        "MSRValue": "0x0404000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000100",
+        "MSRValue": "0x0104000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000002",
+        "MSRValue": "0x0204000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000001",
+        "MSRValue": "0x0604000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_MEM",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000080",
+        "MSRValue": "0x0084000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.SNOOP_NONE OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000122",
+        "MSRValue": "0x063B800490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800120",
+        "MSRValue": "0x3F90000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC08000",
+        "MSRValue": "0x1010000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000490",
+        "MSRValue": "0x0810000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000004",
+        "MSRValue": "0x0410000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000002",
+        "MSRValue": "0x0110000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000010",
+        "MSRValue": "0x0210000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000491",
+        "MSRValue": "0x0090000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000010",
+        "MSRValue": "0x3FBC000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C008000",
+        "MSRValue": "0x103C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210008000",
+        "MSRValue": "0x083C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000080",
+        "MSRValue": "0x043C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00001",
+        "MSRValue": "0x013C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.SNOOP_NONE OCR.ALL_READS.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC0007F7",
+        "MSRValue": "0x103FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000491",
+        "MSRValue": "0x083FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC0007F7",
+        "MSRValue": "0x023C000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000491",
+        "MSRValue": "0x00BC000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00001",
+        "MSRValue": "0x3F84000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000020",
+        "MSRValue": "0x1004000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000001",
+        "MSRValue": "0x0804000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000491",
+        "MSRValue": "0x0404000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000010",
+        "MSRValue": "0x0104000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000491",
+        "MSRValue": "0x0204000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084008000",
+        "MSRValue": "0x0604000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000020",
+        "MSRValue": "0x0084000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000020",
+        "MSRValue": "0x063B800120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000120",
+        "MSRValue": "0x3F90000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000120",
+        "MSRValue": "0x1010000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00100",
+        "MSRValue": "0x0810000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000491",
+        "MSRValue": "0x0410000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800020",
+        "MSRValue": "0x0110000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000490",
+        "MSRValue": "0x0210000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000004",
+        "MSRValue": "0x0090000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000001",
+        "MSRValue": "0x3FBC0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000080",
+        "MSRValue": "0x103C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000122",
+        "MSRValue": "0x083C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000020",
+        "MSRValue": "0x043C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000001",
+        "MSRValue": "0x013C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000122",
+        "MSRValue": "0x103FC007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC008000",
+        "MSRValue": "0x083FC007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000491",
+        "MSRValue": "0x023C0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000120",
+        "MSRValue": "0x00BC0007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000020",
+        "MSRValue": "0x3F840007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000080",
+        "MSRValue": "0x10040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000120",
+        "MSRValue": "0x08040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000120",
+        "MSRValue": "0x04040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000400",
+        "MSRValue": "0x01040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000001",
+        "MSRValue": "0x02040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000020",
+        "MSRValue": "0x06040007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC0007F7",
+        "MSRValue": "0x00840007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000020",
+        "MSRValue": "0x063B8007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000001",
+        "MSRValue": "0x3F900007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000100",
+        "MSRValue": "0x10100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000001",
+        "MSRValue": "0x08100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000080",
+        "MSRValue": "0x04100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000004",
+        "MSRValue": "0x01100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000001",
+        "MSRValue": "0x02100007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000491",
+        "MSRValue": "0x00900007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000122",
+        "MSRValue": "0x3FBC000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000020",
+        "MSRValue": "0x103C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000400",
+        "MSRValue": "0x083C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000002",
+        "MSRValue": "0x043C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000020",
+        "MSRValue": "0x013C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000120",
+        "MSRValue": "0x103FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HITM_OTHER_CORE OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C008000",
+        "MSRValue": "0x083FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000004",
+        "MSRValue": "0x023C000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104008000",
+        "MSRValue": "0x00BC000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x100",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "503",
-        "TakenAlone": "1",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F84000122",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000004",
+        "MSRValue": "0x1004000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000100",
+        "MSRValue": "0x0804000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000100",
+        "MSRValue": "0x0404000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000002",
+        "MSRValue": "0x0104000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800004",
+        "MSRValue": "0x0204000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000080",
+        "MSRValue": "0x0604000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x10",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "20011",
-        "TakenAlone": "1",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0084000122",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000400",
+        "MSRValue": "0x063B800122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000020",
+        "MSRValue": "0x3F90000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to an unsupported read alignment from the elision buffer.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_UNSUPPORTED_ALIGNMENT",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000080",
+        "MSRValue": "0x1010000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000491",
+        "MSRValue": "0x0810000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000400",
+        "MSRValue": "0x0410000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000001",
+        "MSRValue": "0x0110000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000010",
+        "MSRValue": "0x0210000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000002",
+        "MSRValue": "0x0090000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800400",
+        "MSRValue": "0x3FBC000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a transactional abort was signaled due to a data capacity limitation for transactional reads or writes.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_CAPACITY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Number of times an HLE execution aborted due to incompatible memory type",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_MEMTYPE",
-        "PublicDescription": "Number of times an HLE execution aborted due to incompatible memory type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Number of times an RTM execution started.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.START",
-        "PublicDescription": "Number of times we entered an RTM region. Does not count nested transactions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000122",
+        "MSRValue": "0x103C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000490",
+        "MSRValue": "0x083C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404008000",
+        "MSRValue": "0x043C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000100",
+        "MSRValue": "0x013C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000001",
+        "MSRValue": "0x103FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000490",
+        "MSRValue": "0x083FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000490",
+        "MSRValue": "0x023C000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000080",
+        "MSRValue": "0x00BC000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x200",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "101",
-        "TakenAlone": "1",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F84000004",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000010",
+        "MSRValue": "0x1004000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000020",
+        "MSRValue": "0x0804000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000080",
+        "MSRValue": "0x0404000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000120",
+        "MSRValue": "0x0104000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000490",
+        "MSRValue": "0x0204000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000010",
+        "MSRValue": "0x0604000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02100007F7",
+        "MSRValue": "0x0084000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C0007F7",
+        "MSRValue": "0x063B800004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000020",
+        "MSRValue": "0x3F90000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000004",
+        "MSRValue": "0x1010000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000400",
+        "MSRValue": "0x0810000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000002",
+        "MSRValue": "0x0410000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000122",
+        "MSRValue": "0x0110000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00001",
+        "MSRValue": "0x0210000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000001",
+        "MSRValue": "0x0090000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800020",
+        "MSRValue": "0x3FBC000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04100007F7",
+        "MSRValue": "0x103C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000080",
+        "MSRValue": "0x083C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.ANY_SNOOP OCR.ALL_RFO.L3_MISS.ANY_SNOOP OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000122",
+        "MSRValue": "0x043C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000490",
+        "MSRValue": "0x013C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000490",
+        "MSRValue": "0x103FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000004",
+        "MSRValue": "0x083FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00120",
+        "MSRValue": "0x023C000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000004",
+        "MSRValue": "0x00BC000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00010",
+        "MSRValue": "0x3F84000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "6",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD_GE_6",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x40",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "2003",
-        "TakenAlone": "1",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x1004000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000122",
+        "MSRValue": "0x0804000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000002",
+        "MSRValue": "0x0404000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000010",
+        "MSRValue": "0x0104000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000490",
+        "MSRValue": "0x0204000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00120",
+        "MSRValue": "0x0604000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000122",
+        "MSRValue": "0x0084000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C008000",
+        "MSRValue": "0x063B800001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000120",
+        "MSRValue": "0x3F90000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800010",
+        "MSRValue": "0x1010000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000491",
+        "MSRValue": "0x0810000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00020",
+        "MSRValue": "0x0410000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800400",
+        "MSRValue": "0x0110000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.ANY_SNOOP OCR.OTHER.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC008000",
+        "MSRValue": "0x0210000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000004",
+        "MSRValue": "0x0090000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000122",
+        "MSRValue": "0x3FBC000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000122",
+        "MSRValue": "0x103C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000080",
+        "MSRValue": "0x083C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000490",
+        "MSRValue": "0x043C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000080",
+        "MSRValue": "0x013C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00020",
+        "MSRValue": "0x103FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00120",
+        "MSRValue": "0x083FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000080",
+        "MSRValue": "0x023C000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000120",
+        "MSRValue": "0x00BC000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84008000",
+        "MSRValue": "0x3F84000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000100",
+        "MSRValue": "0x1004000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C008000",
+        "MSRValue": "0x0804000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000002",
+        "MSRValue": "0x0404000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000002",
+        "MSRValue": "0x0104000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00400",
+        "MSRValue": "0x0204000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000120",
+        "MSRValue": "0x0604000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000491",
+        "MSRValue": "0x0084000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles while L3 cache miss demand load is outstanding.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L3_MISS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC08000",
+        "MSRValue": "0x063B800002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000122",
+        "MSRValue": "0x3F90000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800001",
+        "MSRValue": "0x1010000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C008000",
+        "MSRValue": "0x0810000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000080",
+        "MSRValue": "0x0410000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000122",
+        "MSRValue": "0x0110000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000120",
+        "MSRValue": "0x0210000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C0007F7",
+        "MSRValue": "0x0090000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000002",
+        "MSRValue": "0x3FBC008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000491",
+        "MSRValue": "0x103C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000491",
+        "MSRValue": "0x083C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000122",
+        "MSRValue": "0x043C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000490",
+        "MSRValue": "0x013C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000001",
+        "MSRValue": "0x103FC08000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -7873,490 +7715,476 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000120",
+        "MSRValue": "0x023C008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000491",
+        "MSRValue": "0x00BC008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000020",
+        "MSRValue": "0x3F84008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000080",
+        "MSRValue": "0x1004008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000001",
+        "MSRValue": "0x0804008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000491",
+        "MSRValue": "0x0404008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004008000",
+        "MSRValue": "0x0104008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000010",
+        "MSRValue": "0x0204008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000010",
+        "MSRValue": "0x0604008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution successfully committed",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.COMMIT",
-        "PublicDescription": "Number of times RTM commit succeeded.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000400",
+        "MSRValue": "0x0084008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000491",
+        "MSRValue": "0x063B808000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to unfriendly events (such as interrupts).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_EVENTS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "Counts number of Offcore outstanding Demand Data Read requests that miss L3 cache in the superQ every cycle.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000002",
+        "MSRValue": "0x3F90008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000490",
+        "MSRValue": "0x1010008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04040007F7",
+        "MSRValue": "0x0810008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000080",
+        "MSRValue": "0x0410008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000001",
+        "MSRValue": "0x0110008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F900007F7",
+        "MSRValue": "0x0210008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000004",
+        "MSRValue": "0x0090008000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000120",
+        "MSRValue": "0x3FBC000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000010",
+        "MSRValue": "0x103C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C008000",
+        "MSRValue": "0x083C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000020",
+        "MSRValue": "0x043C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00004",
+        "MSRValue": "0x013C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01040007F7",
+        "MSRValue": "0x103FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000004",
+        "MSRValue": "0x083FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800080",
+        "MSRValue": "0x023C000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000400",
+        "MSRValue": "0x00BC000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000120",
+        "MSRValue": "0x3F84000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000020",
+        "MSRValue": "0x1004000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000080",
+        "MSRValue": "0x0804000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000010",
+        "MSRValue": "0x0404000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00491",
+        "MSRValue": "0x0104000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000122",
+        "MSRValue": "0x0204000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000001",
+        "MSRValue": "0x0604000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -8377,1541 +8205,1713 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00001",
+        "MSRValue": "0x063B800400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000120",
+        "MSRValue": "0x3F90000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00004",
+        "MSRValue": "0x1010000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000491",
+        "MSRValue": "0x0810000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00002",
+        "MSRValue": "0x0410000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000120",
+        "MSRValue": "0x0110000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000490",
+        "MSRValue": "0x0210000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00100",
+        "MSRValue": "0x0090000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000002",
+        "MSRValue": "0x3FBC000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00100",
+        "MSRValue": "0x103C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800001",
+        "MSRValue": "0x083C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000002",
+        "MSRValue": "0x043C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000080",
+        "MSRValue": "0x013C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000122",
+        "MSRValue": "0x103FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000002",
+        "MSRValue": "0x083FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000080",
+        "MSRValue": "0x023C000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000400",
+        "MSRValue": "0x00BC000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000080",
+        "MSRValue": "0x3F84000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000010",
+        "MSRValue": "0x1004000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000400",
+        "MSRValue": "0x0804000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C008000",
+        "MSRValue": "0x0404000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000004",
+        "MSRValue": "0x0104000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000001",
+        "MSRValue": "0x0204000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000400",
+        "MSRValue": "0x0604000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000080",
+        "MSRValue": "0x0084000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210008000",
+        "MSRValue": "0x063B800010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000100",
+        "MSRValue": "0x3F90000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00491",
+        "MSRValue": "0x1010000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000491",
+        "MSRValue": "0x0810000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests who miss L3 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
-        "PublicDescription": "Demand Data Read requests who miss L3 cache.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01100007F7",
+        "MSRValue": "0x0410000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000010",
+        "MSRValue": "0x0110000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000400",
+        "MSRValue": "0x0210000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02040007F7",
+        "MSRValue": "0x0090000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000120",
+        "MSRValue": "0x3FBC000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000400",
+        "MSRValue": "0x103C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_READS.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00900007F7",
+        "MSRValue": "0x083C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000120",
+        "MSRValue": "0x043C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000100",
+        "MSRValue": "0x013C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00BC000122",
+        "MSRValue": "0x103FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000490",
+        "MSRValue": "0x083FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000080",
+        "MSRValue": "0x023C000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000400",
+        "MSRValue": "0x00BC000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000004",
+        "MSRValue": "0x3F84000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000491",
+        "MSRValue": "0x1004000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000400",
+        "MSRValue": "0x0804000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000020",
+        "MSRValue": "0x0404000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000020",
+        "MSRValue": "0x0104000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000491",
+        "MSRValue": "0x0204000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08040007F7",
+        "MSRValue": "0x0604000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000100",
+        "MSRValue": "0x0084000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000004",
+        "MSRValue": "0x063B800020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000122",
+        "MSRValue": "0x3F90000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00010",
+        "MSRValue": "0x1010000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000002",
+        "MSRValue": "0x0810000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0084000004",
+        "MSRValue": "0x0410000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000120",
+        "MSRValue": "0x0110000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000001",
+        "MSRValue": "0x0210000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED",
-        "PEBS": "1",
-        "PublicDescription": "Number of times HLE abort was triggered.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C008000",
+        "MSRValue": "0x0090000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x013C000010",
+        "MSRValue": "0x3FBC000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000120",
+        "MSRValue": "0x103C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000020",
+        "MSRValue": "0x083C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000010",
+        "MSRValue": "0x043C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000004",
+        "MSRValue": "0x013C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000491",
+        "MSRValue": "0x103FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000491",
+        "MSRValue": "0x083FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000400",
+        "MSRValue": "0x023C000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800120",
+        "MSRValue": "0x00BC000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000490",
+        "MSRValue": "0x3F84000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP  OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F84000491",
+        "MSRValue": "0x1004000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000400",
+        "MSRValue": "0x0804000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000010",
+        "MSRValue": "0x0404000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000122",
+        "MSRValue": "0x0104000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000004",
+        "MSRValue": "0x0204000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000004",
+        "MSRValue": "0x0604000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000400",
+        "MSRValue": "0x0084000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000080",
+        "MSRValue": "0x063B800080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000491",
+        "MSRValue": "0x3F90000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000001",
+        "MSRValue": "0x1010000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0104000001",
+        "MSRValue": "0x0810000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00010",
+        "MSRValue": "0x0410000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C000491",
+        "MSRValue": "0x0110000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_MISS.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x043C000010",
+        "MSRValue": "0x0210000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000100",
+        "MSRValue": "0x0090000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0804000400",
+        "MSRValue": "0x3FBC000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000020",
+        "MSRValue": "0x103C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0210000122",
+        "MSRValue": "0x083C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810000001",
+        "MSRValue": "0x043C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F90000400",
+        "MSRValue": "0x013C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.REMOTE_HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0090000490",
+        "MSRValue": "0x103FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000400",
+        "MSRValue": "0x083FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000120",
+        "MSRValue": "0x023C000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00020",
+        "MSRValue": "0x00BC000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution started.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.START",
-        "PublicDescription": "Number of times we entered an HLE region. Does not count nested transactions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1004000020",
+        "MSRValue": "0x3F84000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000400",
+        "MSRValue": "0x1004000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00004",
+        "MSRValue": "0x0804000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000491",
+        "MSRValue": "0x0404000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C000120",
+        "MSRValue": "0x0104000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0410000400",
+        "MSRValue": "0x0204000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103C0007F7",
+        "MSRValue": "0x0604000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0404000100",
+        "MSRValue": "0x0084000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1010000100",
+        "MSRValue": "0x063B800100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_MISS.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C008000",
+        "MSRValue": "0x3F90000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.OTHER.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0810008000",
+        "MSRValue": "0x1010000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00120",
+        "MSRValue": "0x0810000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0204000010",
+        "MSRValue": "0x0410000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
+        "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS_LOCAL_DRAM.SNOOP_NONE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00840007F7",
+        "MSRValue": "0x0110000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x4",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.  Reported latency may be longer than just the memory latency.",
+        "Deprecated": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0210000100",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS.SNOOP_MISS",
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Deprecated": "1",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_HOP1_DRAM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x023C000100",
+        "MSRValue": "0x0090000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
+        "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x8",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "50021",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED",
+        "PEBS": "1",
+        "PublicDescription": "Number of times RTM abort was triggered.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_EVENTS",
+        "PublicDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_MEM",
+        "PublicDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
+        "PublicDescription": "Number of times an RTM execution aborted due to incompatible memory type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to uncommon conditions.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_TIMER",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
+        "PublicDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution successfully committed",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.COMMIT",
+        "PublicDescription": "Number of times RTM commit succeeded.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution started.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.START",
+        "PublicDescription": "Number of times we entered an RTM region. Does not count nested transactions.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_MISS.HIT_OTHER_CORE_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083C0007F7",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC1",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts the number of times a class of instructions (e.g., vzeroupper) that may cause a transactional abort was executed inside a transactional region",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Deprecated": "1",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_REMOTE_HOP1_DRAM.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0110000001",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC2",
+        "PublicDescription": "Unfriendly TSX abort triggered by a vzeroupper instruction.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of times an instruction execution caused the transactional nest count supported to be exceeded",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC3",
+        "PublicDescription": "Unfriendly TSX abort triggered by a nest count that is too deep.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of times a XBEGIN instruction was executed inside an HLE transactional region.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC4",
+        "PublicDescription": "RTM region detected inside HLE.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC5",
+        "PublicDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times a transactional abort was signaled due to a data capacity limitation for transactional reads or writes.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CAPACITY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CONFLICT",
+        "PublicDescription": "Number of times a TSX line had a cache conflict.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to XRELEASE lock not satisfying the address and value requirements in the elision buffer",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_MISMATCH",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to release/commit but data and address mismatch.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to NoAllocatedElisionBuffer being non-zero.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_NOT_EMPTY",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to an unsupported read alignment from the elision buffer.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_UNSUPPORTED_ALIGNMENT",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times a HLE transactional region aborted due to a non XRELEASE prefixed instruction writing to an elided lock in the elision buffer",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_STORE_TO_ELIDED_LOCK",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to a non-release/commit store to lock.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times HLE lock could not be elided due to ElisionBufferAvailable being zero.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.HLE_ELISION_BUFFER_FULL",
+        "PublicDescription": "Number of times we could not allocate Lock Buffer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/other.json
index f77d78e90954..2f111a22d81f 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/other.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/other.json
@@ -1,1335 +1,1382 @@
 [
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100010",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL0_TURBO_LICENSE",
+        "PublicDescription": "Core cycles where the core was running with power-delivery for baseline license level 0.  This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x7"
+    },
+    {
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL1_TURBO_LICENSE",
+        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 1.  This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
+        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server michroarchtecture).  This includes high current AVX 512-bit instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Core cycles the core was throttled due to a pending power level request.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.THROTTLE",
+        "PublicDescription": "Core cycles the out-of-order engine was throttled due to a pending power level request.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of hardware interrupts received by the processor.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xCB",
+        "EventName": "HW_INTERRUPTS.RECEIVED",
+        "PublicDescription": "Counts the number of hardware interruptions received by the processor.",
+        "SampleAfterValue": "203",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xFE",
+        "EventName": "IDI_MISC.WB_DOWNGRADE",
+        "PublicDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xFE",
+        "EventName": "IDI_MISC.WB_UPGRADE",
+        "PublicDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "OCR.ALL_DATA_RD.ANY_RESPONSE have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100120",
+        "MSRValue": "0x0000010491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01002007F7",
+        "MSRValue": "0x3F803C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0491",
+        "MSRValue": "0x10003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020122",
+        "MSRValue": "0x08003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000407F7",
+        "MSRValue": "0x04003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100004",
+        "MSRValue": "0x01003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080088000",
+        "MSRValue": "0x08007C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100001",
+        "MSRValue": "0x02003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100122",
+        "MSRValue": "0x00803C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000028000",
+        "MSRValue": "0x3F80080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040002",
+        "MSRValue": "0x1000080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200020",
+        "MSRValue": "0x0800080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100120",
+        "MSRValue": "0x0400080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080004",
+        "MSRValue": "0x0100080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0120",
+        "MSRValue": "0x0200080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100491",
+        "MSRValue": "0x0080080491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100120",
+        "MSRValue": "0x3F80200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100001",
+        "MSRValue": "0x1000200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0001",
+        "MSRValue": "0x0800200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000048000",
+        "MSRValue": "0x0400200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020020",
+        "MSRValue": "0x0100200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100002",
+        "MSRValue": "0x0200200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080080",
+        "MSRValue": "0x0080200491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200080",
+        "MSRValue": "0x3F80040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000407F7",
+        "MSRValue": "0x1000040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80088000",
+        "MSRValue": "0x0800040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0020",
+        "MSRValue": "0x0400040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080120",
+        "MSRValue": "0x0100040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0490",
+        "MSRValue": "0x0200040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020122",
+        "MSRValue": "0x0080040491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200491",
+        "MSRValue": "0x3F80100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80408000",
+        "MSRValue": "0x1000100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020490",
+        "MSRValue": "0x0800100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F804007F7",
+        "MSRValue": "0x0400100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xFE",
-        "EventName": "IDI_MISC.WB_DOWNGRADE",
-        "PublicDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080002",
+        "MSRValue": "0x0100100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0004",
+        "MSRValue": "0x0200100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080120",
+        "MSRValue": "0x0080100491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200001",
+        "MSRValue": "0x3F80400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040004",
+        "MSRValue": "0x0080400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80108000",
+        "MSRValue": "0x0100400491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C8000",
+        "MSRValue": "0x3F80020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400491",
+        "MSRValue": "0x1000020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0010",
+        "MSRValue": "0x0800020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100108000",
+        "MSRValue": "0x0400020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02002007F7",
+        "MSRValue": "0x0100020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0400",
+        "MSRValue": "0x0200020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040490",
+        "MSRValue": "0x0080020491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080020",
+        "MSRValue": "0x0000010490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020004",
+        "MSRValue": "0x3F803C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080120",
+        "MSRValue": "0x10003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100122",
+        "MSRValue": "0x08003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0100",
+        "MSRValue": "0x04003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100490",
+        "MSRValue": "0x01003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C8000",
+        "MSRValue": "0x08007C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080400",
+        "MSRValue": "0x02003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100001",
+        "MSRValue": "0x00803C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0122",
+        "MSRValue": "0x3F80080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040002",
+        "MSRValue": "0x1000080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100080",
+        "MSRValue": "0x0800080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200122",
+        "MSRValue": "0x0400080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800088000",
+        "MSRValue": "0x0100080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020491",
+        "MSRValue": "0x0200080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080010",
+        "MSRValue": "0x0080080490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0400",
+        "MSRValue": "0x3F80200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080002",
+        "MSRValue": "0x1000200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040122",
+        "MSRValue": "0x0800200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0122",
+        "MSRValue": "0x0400200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0080",
+        "MSRValue": "0x0100200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080001",
+        "MSRValue": "0x0200200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040400",
+        "MSRValue": "0x0080200490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.ANY_RESPONSE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010020",
+        "MSRValue": "0x3F80040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020002",
+        "MSRValue": "0x1000040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200004",
+        "MSRValue": "0x0800040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200028000",
+        "MSRValue": "0x0400040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080100",
+        "MSRValue": "0x0100040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400080",
+        "MSRValue": "0x0200040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000807F7",
+        "MSRValue": "0x0080040490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200122",
+        "MSRValue": "0x3F80100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040020",
+        "MSRValue": "0x1000100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200001",
+        "MSRValue": "0x0800100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040001",
+        "MSRValue": "0x0400100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400400",
+        "MSRValue": "0x0100100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0100",
+        "MSRValue": "0x0200100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040010",
+        "MSRValue": "0x0080100490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800048000",
+        "MSRValue": "0x3F80400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080001",
+        "MSRValue": "0x0080400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080491",
+        "MSRValue": "0x0100400490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100020",
+        "MSRValue": "0x3F80020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080020",
+        "MSRValue": "0x1000020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0002",
+        "MSRValue": "0x0800020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020491",
+        "MSRValue": "0x0400020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020010",
+        "MSRValue": "0x0100020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020490",
+        "MSRValue": "0x0200020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0122",
+        "MSRValue": "0x0080020490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.ANY_RESPONSE have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020001",
+        "MSRValue": "0x0000010120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0001",
+        "MSRValue": "0x3F803C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020100",
+        "MSRValue": "0x10003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200010",
+        "MSRValue": "0x08003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100490",
+        "MSRValue": "0x04003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE have any response type.",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.ANY_RESPONSE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010490",
+        "MSRValue": "0x01003C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800108000",
+        "MSRValue": "0x08007C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -1349,2756 +1396,2717 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040400",
+        "MSRValue": "0x00803C0120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020010",
+        "MSRValue": "0x3F80080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200048000",
+        "MSRValue": "0x1000080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100491",
+        "MSRValue": "0x0800080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040122",
+        "MSRValue": "0x0400080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200002",
+        "MSRValue": "0x0100080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020100",
+        "MSRValue": "0x0200080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP  OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800807F7",
+        "MSRValue": "0x0080080120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080400",
+        "MSRValue": "0x3F80200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020100",
+        "MSRValue": "0x1000200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200490",
+        "MSRValue": "0x0800200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08000207F7",
+        "MSRValue": "0x0400200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000207F7",
+        "MSRValue": "0x0100200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080490",
+        "MSRValue": "0x0200200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200491",
+        "MSRValue": "0x0080200120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080120",
+        "MSRValue": "0x3F80040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080122",
+        "MSRValue": "0x1000040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200491",
+        "MSRValue": "0x0800040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0100",
+        "MSRValue": "0x0400040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080001",
+        "MSRValue": "0x0100040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080001",
+        "MSRValue": "0x0200040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400088000",
+        "MSRValue": "0x0080040120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040122",
+        "MSRValue": "0x3F80100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040001",
+        "MSRValue": "0x1000100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.ANY_RESPONSE have any response type.",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.ANY_RESPONSE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010122",
+        "MSRValue": "0x0800100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads have any response type.",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.ANY_RESPONSE",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010004",
+        "MSRValue": "0x0400100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080004",
+        "MSRValue": "0x0100100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040100",
+        "MSRValue": "0x0200100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0002",
+        "MSRValue": "0x0080100120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400400",
+        "MSRValue": "0x3F80400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0001",
+        "MSRValue": "0x0080400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0020",
+        "MSRValue": "0x0100400120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080020",
+        "MSRValue": "0x3F80020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400020",
+        "MSRValue": "0x1000020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200020",
+        "MSRValue": "0x0800020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020080",
+        "MSRValue": "0x0400020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_MISS OCR.ALL_READS.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C07F7",
+        "MSRValue": "0x0100020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020490",
+        "MSRValue": "0x0200020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200001",
+        "MSRValue": "0x0080020120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.ANY_RESPONSE have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400010",
+        "MSRValue": "0x00000107F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080100",
+        "MSRValue": "0x3F803C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200002",
+        "MSRValue": "0x10003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020020",
+        "MSRValue": "0x08003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100088000",
+        "MSRValue": "0x04003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200100",
+        "MSRValue": "0x01003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200490",
+        "MSRValue": "0x08007C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_MISS OCR.ALL_READS.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040120",
+        "MSRValue": "0x02003C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_NONE OCR.ALL_READS.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800207F7",
+        "MSRValue": "0x00803C07F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP  OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200080",
+        "MSRValue": "0x3F800807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0010",
+        "MSRValue": "0x10000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100491",
+        "MSRValue": "0x08000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020120",
+        "MSRValue": "0x04000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040122",
+        "MSRValue": "0x01000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800207F7",
+        "MSRValue": "0x02000807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100491",
+        "MSRValue": "0x00800807F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP  OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020400",
+        "MSRValue": "0x3F802007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400122",
+        "MSRValue": "0x10002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020490",
+        "MSRValue": "0x08002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000807F7",
+        "MSRValue": "0x04002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400100",
+        "MSRValue": "0x01002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040491",
+        "MSRValue": "0x02002007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400122",
+        "MSRValue": "0x00802007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP  OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040122",
+        "MSRValue": "0x3F800407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040004",
+        "MSRValue": "0x10000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200010",
+        "MSRValue": "0x08000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040010",
+        "MSRValue": "0x04000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0001",
+        "MSRValue": "0x01000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0120",
+        "MSRValue": "0x02000407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200100",
+        "MSRValue": "0x00800407F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP  OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100080",
+        "MSRValue": "0x3F801007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080001",
+        "MSRValue": "0x10001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200400",
+        "MSRValue": "0x08001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100010",
+        "MSRValue": "0x04001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200001",
+        "MSRValue": "0x01001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080004",
+        "MSRValue": "0x02001007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020010",
+        "MSRValue": "0x00801007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200490",
+        "MSRValue": "0x3F804007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040490",
+        "MSRValue": "0x00804007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020004",
+        "MSRValue": "0x01004007F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0004",
+        "MSRValue": "0x3F800207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020004",
+        "MSRValue": "0x10000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100020",
+        "MSRValue": "0x08000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040002",
+        "MSRValue": "0x04000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200122",
+        "MSRValue": "0x01000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080122",
+        "MSRValue": "0x02000207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020002",
+        "MSRValue": "0x00800207F7",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.LVL0_TURBO_LICENSE",
-        "PublicDescription": "Core cycles where the core was running with power-delivery for baseline license level 0.  This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x7"
-    },
-    {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "OCR.ALL_RFO.ANY_RESPONSE have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080028000",
+        "MSRValue": "0x0000010122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400490",
+        "MSRValue": "0x3F803C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040002",
+        "MSRValue": "0x10003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200002",
+        "MSRValue": "0x08003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020122",
+        "MSRValue": "0x04003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400020",
+        "MSRValue": "0x01003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080004",
+        "MSRValue": "0x08007C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100491",
+        "MSRValue": "0x02003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08002007F7",
+        "MSRValue": "0x00803C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200491",
+        "MSRValue": "0x3F80080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020120",
+        "MSRValue": "0x1000080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.ANY_RESPONSE have any response type.",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.ANY_RESPONSE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010120",
+        "MSRValue": "0x0800080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0122",
+        "MSRValue": "0x0400080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040100",
+        "MSRValue": "0x0100080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200004",
+        "MSRValue": "0x0200080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080010",
+        "MSRValue": "0x0080080122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000407F7",
+        "MSRValue": "0x3F80200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0020",
+        "MSRValue": "0x1000200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040080",
+        "MSRValue": "0x0800200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0002",
+        "MSRValue": "0x0400200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles the core was throttled due to a pending power level request.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.THROTTLE",
-        "PublicDescription": "Core cycles the out-of-order engine was throttled due to a pending power level request.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0002",
+        "MSRValue": "0x0100200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200020",
+        "MSRValue": "0x0200200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080004",
+        "MSRValue": "0x0080200122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020004",
+        "MSRValue": "0x3F80040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040400",
+        "MSRValue": "0x1000040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040120",
+        "MSRValue": "0x0800040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100001",
+        "MSRValue": "0x0400040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040002",
+        "MSRValue": "0x0100040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0001",
+        "MSRValue": "0x0200040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040400",
+        "MSRValue": "0x0080040122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100010",
+        "MSRValue": "0x3F80100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020122",
+        "MSRValue": "0x1000100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests have any response type.",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.ANY_RESPONSE",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000018000",
+        "MSRValue": "0x0800100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100004",
+        "MSRValue": "0x0400100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020004",
+        "MSRValue": "0x0100100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080020",
+        "MSRValue": "0x0200100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020010",
+        "MSRValue": "0x0080100122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020002",
+        "MSRValue": "0x3F80400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080010",
+        "MSRValue": "0x0080400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0120",
+        "MSRValue": "0x0100400122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads have any response type.",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.ANY_RESPONSE",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010001",
+        "MSRValue": "0x3F80020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0004",
+        "MSRValue": "0x1000020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080208000",
+        "MSRValue": "0x0800020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020020",
+        "MSRValue": "0x0400020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100080",
+        "MSRValue": "0x0100020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400002",
+        "MSRValue": "0x0200020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100002",
+        "MSRValue": "0x0080020122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040120",
+        "MSRValue": "0x0000010004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080120",
+        "MSRValue": "0x3F803C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020001",
+        "MSRValue": "0x10003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.ANY_RESPONSE have any response type.",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.ANY_RESPONSE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010491",
+        "MSRValue": "0x08003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080100",
+        "MSRValue": "0x04003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100122",
+        "MSRValue": "0x01003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080020",
+        "MSRValue": "0x08007C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200004",
+        "MSRValue": "0x02003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400120",
+        "MSRValue": "0x00803C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020080",
+        "MSRValue": "0x3F80080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040002",
+        "MSRValue": "0x1000080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200120",
+        "MSRValue": "0x0800080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200100",
+        "MSRValue": "0x0400080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080120",
+        "MSRValue": "0x0100080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C8000",
+        "MSRValue": "0x0200080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040100",
+        "MSRValue": "0x0080080004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040490",
+        "MSRValue": "0x3F80200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020100",
+        "MSRValue": "0x1000200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080490",
+        "MSRValue": "0x0800200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200020",
+        "MSRValue": "0x0400200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020400",
+        "MSRValue": "0x0100200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040100",
+        "MSRValue": "0x0200200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200100",
+        "MSRValue": "0x0080200004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020100",
+        "MSRValue": "0x3F80040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100100",
+        "MSRValue": "0x1000040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0491",
+        "MSRValue": "0x0800040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C07F7",
+        "MSRValue": "0x0400040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0004",
+        "MSRValue": "0x0100040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400491",
+        "MSRValue": "0x0200040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020491",
+        "MSRValue": "0x0080040004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400002",
+        "MSRValue": "0x3F80100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0490",
+        "MSRValue": "0x1000100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0491",
+        "MSRValue": "0x0800100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040400",
+        "MSRValue": "0x0400100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040001",
+        "MSRValue": "0x0100100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200400",
+        "MSRValue": "0x0200100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0491",
+        "MSRValue": "0x0080100004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0100",
+        "MSRValue": "0x3F80400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100010",
+        "MSRValue": "0x0080400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100100",
+        "MSRValue": "0x0100400004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080491",
+        "MSRValue": "0x3F80020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400100",
+        "MSRValue": "0x1000020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10002007F7",
+        "MSRValue": "0x0800020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0400",
+        "MSRValue": "0x0400020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0120",
+        "MSRValue": "0x0100020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200108000",
+        "MSRValue": "0x0200020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand code reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0100",
+        "MSRValue": "0x0080020004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020400",
+        "MSRValue": "0x0000010001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.ANY_RESPONSE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010010",
+        "MSRValue": "0x3F803C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100002",
+        "MSRValue": "0x10003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040491",
+        "MSRValue": "0x08003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xFE",
-        "EventName": "IDI_MISC.WB_UPGRADE",
-        "PublicDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200010",
+        "MSRValue": "0x04003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0004",
+        "MSRValue": "0x01003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100048000",
+        "MSRValue": "0x08007C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0490",
+        "MSRValue": "0x02003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040490",
+        "MSRValue": "0x00803C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200400",
+        "MSRValue": "0x3F80080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200491",
+        "MSRValue": "0x1000080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100010",
+        "MSRValue": "0x0800080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200120",
+        "MSRValue": "0x0400080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100004",
+        "MSRValue": "0x0100080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040010",
+        "MSRValue": "0x0200080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0020",
+        "MSRValue": "0x0080080001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0010",
+        "MSRValue": "0x3F80200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400400",
+        "MSRValue": "0x1000200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400020",
+        "MSRValue": "0x0800200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C07F7",
+        "MSRValue": "0x0400200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100400",
+        "MSRValue": "0x0100200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040004",
+        "MSRValue": "0x0200200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C07F7",
+        "MSRValue": "0x0080200001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200490",
+        "MSRValue": "0x3F80040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100028000",
+        "MSRValue": "0x1000040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080080",
+        "MSRValue": "0x0800040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080408000",
+        "MSRValue": "0x0400040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08001007F7",
+        "MSRValue": "0x0100040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400010",
+        "MSRValue": "0x0200040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -4109,945 +4117,945 @@
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020001",
+        "MSRValue": "0x0080040001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040020",
+        "MSRValue": "0x3F80100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020020",
+        "MSRValue": "0x1000100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040491",
+        "MSRValue": "0x0800100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200020",
+        "MSRValue": "0x0400100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200122",
+        "MSRValue": "0x0100100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200020",
+        "MSRValue": "0x0200100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020400",
+        "MSRValue": "0x0080100001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0120",
+        "MSRValue": "0x3F80400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.ANY_RESPONSE",
+        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010080",
+        "MSRValue": "0x0080400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020490",
+        "MSRValue": "0x0100400001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040100",
+        "MSRValue": "0x3F80020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020122",
+        "MSRValue": "0x1000020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0010",
+        "MSRValue": "0x0800020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200122",
+        "MSRValue": "0x0400020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100490",
+        "MSRValue": "0x0100020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100122",
+        "MSRValue": "0x0200020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts demand data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100408000",
+        "MSRValue": "0x0080020001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0020",
+        "MSRValue": "0x0000010002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0002",
+        "MSRValue": "0x3F803C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04001007F7",
+        "MSRValue": "0x10003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80048000",
+        "MSRValue": "0x08003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100490",
+        "MSRValue": "0x04003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200002",
+        "MSRValue": "0x01003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080491",
+        "MSRValue": "0x08007C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000807F7",
+        "MSRValue": "0x02003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100400",
+        "MSRValue": "0x00803C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200002",
+        "MSRValue": "0x3F80080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100004",
+        "MSRValue": "0x1000080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.ANY_RESPONSE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010400",
+        "MSRValue": "0x0800080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200001",
+        "MSRValue": "0x0400080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C8000",
+        "MSRValue": "0x0100080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100120",
+        "MSRValue": "0x0200080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040010",
+        "MSRValue": "0x0080080002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100080",
+        "MSRValue": "0x3F80200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020122",
+        "MSRValue": "0x1000200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000088000",
+        "MSRValue": "0x0800200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP OCR.ALL_READS.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C07F7",
+        "MSRValue": "0x0400200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00804007F7",
+        "MSRValue": "0x0100200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400028000",
+        "MSRValue": "0x0200200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0490",
+        "MSRValue": "0x0080200002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400004",
+        "MSRValue": "0x3F80040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0001",
+        "MSRValue": "0x1000040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020002",
+        "MSRValue": "0x0800040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C07F7",
+        "MSRValue": "0x0400040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400004",
+        "MSRValue": "0x0100040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100001",
+        "MSRValue": "0x0200040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.SNOOP_NONE OCR.ALL_READS.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C07F7",
+        "MSRValue": "0x0080040002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080080",
+        "MSRValue": "0x3F80100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020490",
+        "MSRValue": "0x1000100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80028000",
+        "MSRValue": "0x0800100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0490",
+        "MSRValue": "0x0400100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200020",
+        "MSRValue": "0x0100100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01001007F7",
+        "MSRValue": "0x0200100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100122",
+        "MSRValue": "0x0080100002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0122",
+        "MSRValue": "0x3F80400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP  OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F800407F7",
+        "MSRValue": "0x0080400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C07F7",
+        "MSRValue": "0x0100400002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.ANY_RESPONSE have any response type.",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.ANY_RESPONSE",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00000107F7",
+        "MSRValue": "0x3F80020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0491",
+        "MSRValue": "0x1000020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040491",
+        "MSRValue": "0x0800020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020080",
+        "MSRValue": "0x0400020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000208000",
+        "MSRValue": "0x0100020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0491",
+        "MSRValue": "0x0200020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all demand data writes (RFOs)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040400",
+        "MSRValue": "0x0080020002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080010",
+        "MSRValue": "0x0000018000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.ANY_SNOOP OCR.OTHER.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400100",
+        "MSRValue": "0x3F803C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HITM_OTHER_CORE OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100080",
+        "MSRValue": "0x10003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080100",
+        "MSRValue": "0x08003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080010",
+        "MSRValue": "0x04003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400120",
+        "MSRValue": "0x01003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080400",
+        "MSRValue": "0x08007C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0490",
+        "MSRValue": "0x02003C8000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -5067,1111 +5075,1092 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800028000",
+        "MSRValue": "0x3F80088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080491",
+        "MSRValue": "0x1000088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100002",
+        "MSRValue": "0x0800088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10001007F7",
+        "MSRValue": "0x0400088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP  OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F802007F7",
+        "MSRValue": "0x0100088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000407F7",
+        "MSRValue": "0x0200088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00801007F7",
+        "MSRValue": "0x0080088000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0080",
+        "MSRValue": "0x3F80208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080490",
+        "MSRValue": "0x1000208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020400",
+        "MSRValue": "0x0800208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100400",
+        "MSRValue": "0x0400208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04000807F7",
+        "MSRValue": "0x0100208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100004",
+        "MSRValue": "0x0200208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100491",
+        "MSRValue": "0x0080208000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020002",
+        "MSRValue": "0x3F80048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.OTHER.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0080",
+        "MSRValue": "0x1000048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0122",
+        "MSRValue": "0x0800048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040490",
+        "MSRValue": "0x0400048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0002",
+        "MSRValue": "0x0100048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020100",
+        "MSRValue": "0x0200048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040120",
+        "MSRValue": "0x0080048000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.OTHER.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800807F7",
+        "MSRValue": "0x3F80108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020001",
+        "MSRValue": "0x1000108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02000207F7",
+        "MSRValue": "0x0800108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200080",
+        "MSRValue": "0x0400108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.T0",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0122",
+        "MSRValue": "0x0100108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200001",
+        "MSRValue": "0x0200108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100491",
+        "MSRValue": "0x0080108000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00800407F7",
+        "MSRValue": "0x3F80408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100020",
+        "MSRValue": "0x0080408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
-        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server michroarchtecture).  This includes high current AVX 512-bit instructions.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0400",
+        "MSRValue": "0x0100408000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0020",
+        "MSRValue": "0x3F80028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080400",
+        "MSRValue": "0x1000028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200120",
+        "MSRValue": "0x0800028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400080",
+        "MSRValue": "0x0400028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests  OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020004",
+        "MSRValue": "0x0100028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100400",
+        "MSRValue": "0x0200028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts any other requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.OTHER.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080002",
+        "MSRValue": "0x0080028000",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200120",
+        "MSRValue": "0x0000010400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0004",
+        "MSRValue": "0x3F803C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200490",
+        "MSRValue": "0x10003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80208000",
+        "MSRValue": "0x08003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100400",
+        "MSRValue": "0x04003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01000207F7",
+        "MSRValue": "0x01003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200490",
+        "MSRValue": "0x08007C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100002",
+        "MSRValue": "0x02003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00802007F7",
+        "MSRValue": "0x00803C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0400",
+        "MSRValue": "0x3F80080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0080",
+        "MSRValue": "0x1000080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100100",
+        "MSRValue": "0x0800080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200010",
+        "MSRValue": "0x0400080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040120",
+        "MSRValue": "0x0100080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200004",
+        "MSRValue": "0x0200080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0002",
+        "MSRValue": "0x0080080400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200080",
+        "MSRValue": "0x3F80200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040080",
+        "MSRValue": "0x1000200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400490",
+        "MSRValue": "0x0800200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020400",
+        "MSRValue": "0x0400200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0491",
+        "MSRValue": "0x0100200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100002",
+        "MSRValue": "0x0200200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100122",
+        "MSRValue": "0x0080200400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP  OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080490",
+        "MSRValue": "0x3F80040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080080",
+        "MSRValue": "0x1000040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040020",
+        "MSRValue": "0x0800040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0100",
+        "MSRValue": "0x0400040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040491",
+        "MSRValue": "0x0100040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040080",
+        "MSRValue": "0x0200040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0100",
+        "MSRValue": "0x0080040400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400080",
+        "MSRValue": "0x3F80100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200120",
+        "MSRValue": "0x1000100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080120",
+        "MSRValue": "0x0800100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080002",
+        "MSRValue": "0x0400100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040490",
+        "MSRValue": "0x0100100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080002",
+        "MSRValue": "0x0200100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020020",
+        "MSRValue": "0x0080100400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080048000",
+        "MSRValue": "0x3F80400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080002",
+        "MSRValue": "0x0080400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080001",
+        "MSRValue": "0x0100400400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200122",
+        "MSRValue": "0x3F80020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080490",
+        "MSRValue": "0x1000020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040004",
+        "MSRValue": "0x0800020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040002",
+        "MSRValue": "0x0400020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040001",
+        "MSRValue": "0x0100020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200400",
+        "MSRValue": "0x0200020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -6182,1325 +6171,1309 @@
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100400",
+        "MSRValue": "0x0080020400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400001",
+        "MSRValue": "0x0000010010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040122",
+        "MSRValue": "0x3F803C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400001",
+        "MSRValue": "0x10003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200491",
+        "MSRValue": "0x08003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400002",
+        "MSRValue": "0x04003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400010",
+        "MSRValue": "0x01003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.ANY_SNOOP OCR.OTHER.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C8000",
+        "MSRValue": "0x08007C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200080",
+        "MSRValue": "0x02003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100120",
+        "MSRValue": "0x00803C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0010",
+        "MSRValue": "0x3F80080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000807F7",
+        "MSRValue": "0x1000080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100010",
+        "MSRValue": "0x0800080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80400004",
+        "MSRValue": "0x0400080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080491",
+        "MSRValue": "0x0100080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020001",
+        "MSRValue": "0x0200080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800208000",
+        "MSRValue": "0x0080080010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020100",
+        "MSRValue": "0x3F80200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0001",
+        "MSRValue": "0x1000200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040080",
+        "MSRValue": "0x0800200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0400",
+        "MSRValue": "0x0400200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0120",
+        "MSRValue": "0x0100200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020120",
+        "MSRValue": "0x0200200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400108000",
+        "MSRValue": "0x0080200010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0490",
+        "MSRValue": "0x3F80040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080108000",
+        "MSRValue": "0x1000040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020080",
+        "MSRValue": "0x0800040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01004007F7",
+        "MSRValue": "0x0400040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040010",
+        "MSRValue": "0x0100040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200010",
+        "MSRValue": "0x0200040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0004",
+        "MSRValue": "0x0080040010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200100",
+        "MSRValue": "0x3F80100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200080",
+        "MSRValue": "0x1000100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040020",
+        "MSRValue": "0x0800100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020080",
+        "MSRValue": "0x0400100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000407F7",
+        "MSRValue": "0x0100100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100080",
+        "MSRValue": "0x0200100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10000207F7",
+        "MSRValue": "0x0080100010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP  OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040491",
+        "MSRValue": "0x3F80400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED  OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080122",
+        "MSRValue": "0x0080400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200400",
+        "MSRValue": "0x0100400010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200100",
+        "MSRValue": "0x3F80020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040010",
+        "MSRValue": "0x1000020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080080",
+        "MSRValue": "0x0800020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200004",
+        "MSRValue": "0x0400020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C8000",
+        "MSRValue": "0x0100020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE  OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200120",
+        "MSRValue": "0x0200020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100100",
+        "MSRValue": "0x0080020010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.PF_L2_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0001",
+        "MSRValue": "0x0000010020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0122",
+        "MSRValue": "0x3F803C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0100",
+        "MSRValue": "0x10003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080010",
+        "MSRValue": "0x08003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200088000",
+        "MSRValue": "0x04003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080400",
+        "MSRValue": "0x01003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020491",
+        "MSRValue": "0x08007C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040122",
+        "MSRValue": "0x02003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020020",
+        "MSRValue": "0x00803C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400490",
+        "MSRValue": "0x3F80080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020002",
+        "MSRValue": "0x1000080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100002",
+        "MSRValue": "0x0800080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020122",
+        "MSRValue": "0x0400080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020080",
+        "MSRValue": "0x0100080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020001",
+        "MSRValue": "0x0200080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE  OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040490",
+        "MSRValue": "0x0080080020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of PREFETCHW instructions executed.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100490",
+        "MSRValue": "0x3F80200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100020",
+        "MSRValue": "0x1000200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080491",
+        "MSRValue": "0x0800200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040120",
+        "MSRValue": "0x0400200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_M.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200040120",
+        "MSRValue": "0x0100200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020010",
+        "MSRValue": "0x0200200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020490",
+        "MSRValue": "0x0080200020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0004",
+        "MSRValue": "0x3F80040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200490",
+        "MSRValue": "0x1000040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080122",
+        "MSRValue": "0x0800040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040001",
+        "MSRValue": "0x0400040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0010",
+        "MSRValue": "0x0100040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100100",
+        "MSRValue": "0x0200040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0080",
+        "MSRValue": "0x0080040020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040080",
+        "MSRValue": "0x3F80100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080010",
+        "MSRValue": "0x1000100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020120",
+        "MSRValue": "0x0800100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD  OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100122",
+        "MSRValue": "0x0400100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020120",
+        "MSRValue": "0x0100100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.LVL1_TURBO_LICENSE",
-        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 1.  This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x18"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040020",
+        "MSRValue": "0x0200100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200004",
+        "MSRValue": "0x0080100020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020080",
+        "MSRValue": "0x3F80400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040020",
+        "MSRValue": "0x0080400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080400001",
+        "MSRValue": "0x0100400020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080004",
+        "MSRValue": "0x3F80020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080100",
+        "MSRValue": "0x1000020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100490",
+        "MSRValue": "0x0800020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100020",
+        "MSRValue": "0x0400020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP  OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.ANY_SNOOP",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80080122",
+        "MSRValue": "0x0100020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400100120",
+        "MSRValue": "0x0200020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400491",
+        "MSRValue": "0x0080020020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100080080",
+        "MSRValue": "0x0000010080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200002",
+        "MSRValue": "0x3F803C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0120",
+        "MSRValue": "0x10003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of hardware interrupts received by the processor.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xCB",
-        "EventName": "HW_INTERRUPTS.RECEIVED",
-        "PublicDescription": "Counts the number of hardware interruptions received by the processor.",
-        "SampleAfterValue": "203",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x08003C0080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200080",
+        "MSRValue": "0x04003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020020",
+        "MSRValue": "0x01003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -7520,1143 +7493,1170 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0020",
+        "MSRValue": "0x02003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000108000",
+        "MSRValue": "0x00803C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100080",
+        "MSRValue": "0x3F80080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040001",
+        "MSRValue": "0x1000080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0002",
+        "MSRValue": "0x0800080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD  OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040491",
+        "MSRValue": "0x0400080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020120",
+        "MSRValue": "0x0100080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED  OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100490",
+        "MSRValue": "0x0200080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.ANY_RESPONSE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010002",
+        "MSRValue": "0x0080080080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040004",
+        "MSRValue": "0x3F80200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020004",
+        "MSRValue": "0x1000200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100001",
+        "MSRValue": "0x0800200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400020002",
+        "MSRValue": "0x0400200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100004",
+        "MSRValue": "0x0100200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400208000",
+        "MSRValue": "0x0200200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.ANY_RESPONSE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010100",
+        "MSRValue": "0x0080200080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080491",
+        "MSRValue": "0x3F80040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080490",
+        "MSRValue": "0x1000040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040100",
+        "MSRValue": "0x0800040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100001",
+        "MSRValue": "0x0400040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02003C0491",
+        "MSRValue": "0x0100040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400048000",
+        "MSRValue": "0x0200040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0010",
+        "MSRValue": "0x0080040080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200208000",
+        "MSRValue": "0x3F80100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x00803C0490",
+        "MSRValue": "0x1000100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP  OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.SUPPLIER_NONE.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80020120",
+        "MSRValue": "0x0800100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0010",
+        "MSRValue": "0x0400100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200400",
+        "MSRValue": "0x0100100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080020",
+        "MSRValue": "0x0200100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800200491",
+        "MSRValue": "0x0080100080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_S.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000100400",
+        "MSRValue": "0x3F80400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020010",
+        "MSRValue": "0x0080400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_DATA_RD.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080040004",
+        "MSRValue": "0x0100400080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080004",
+        "MSRValue": "0x3F80020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080100",
+        "MSRValue": "0x1000020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_M.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000040010",
+        "MSRValue": "0x0800020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200020001",
+        "MSRValue": "0x0400020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080001",
+        "MSRValue": "0x0100020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD  OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04002007F7",
+        "MSRValue": "0x0200020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE  OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_DATA_RD.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000080122",
+        "MSRValue": "0x0080020080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OCR.PF_L3_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08007C0020",
+        "MSRValue": "0x0000010100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)  OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200002",
+        "MSRValue": "0x3F803C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080020",
+        "MSRValue": "0x10003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.SUPPLIER_NONE.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080020400",
+        "MSRValue": "0x08003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED  OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100020491",
+        "MSRValue": "0x04003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100100",
+        "MSRValue": "0x01003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP  OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_F.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80200120",
+        "MSRValue": "0x08007C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0400",
+        "MSRValue": "0x02003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400040080",
+        "MSRValue": "0x00803C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200010",
+        "MSRValue": "0x3F80080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040020",
+        "MSRValue": "0x1000080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests OCR.OTHER.L3_HIT.HITM_OTHER_CORE OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C8000",
+        "MSRValue": "0x0800080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040100",
+        "MSRValue": "0x0400080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200100100",
+        "MSRValue": "0x0100080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400080400",
+        "MSRValue": "0x0200080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_F.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000200001",
+        "MSRValue": "0x0080080100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of PREFETCHNTA instructions executed.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.NTA",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100200004",
+        "MSRValue": "0x3F80200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads  OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_M.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800040004",
+        "MSRValue": "0x1000200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100120",
+        "MSRValue": "0x0800200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_CODE_RD.L3_HIT_S.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080100004",
+        "MSRValue": "0x0400200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040400",
+        "MSRValue": "0x0100200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0400",
+        "MSRValue": "0x0200200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_F.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200200400",
+        "MSRValue": "0x0080200100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_E.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080080122",
+        "MSRValue": "0x3F80040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80100020",
+        "MSRValue": "0x1000040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs  OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100100020",
+        "MSRValue": "0x0800040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200122",
+        "MSRValue": "0x0400040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0080",
+        "MSRValue": "0x0100040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads  OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT_M.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100040001",
+        "MSRValue": "0x0200040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_S.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_M.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800100010",
+        "MSRValue": "0x0080040100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE  OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HITM_OTHER_CORE",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x1000020491",
+        "MSRValue": "0x3F80100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD  OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080490",
+        "MSRValue": "0x1000100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts any other requests  OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.OTHER.L3_HIT_F.NO_SNOOP_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100208000",
+        "MSRValue": "0x0800100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP  OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F801007F7",
+        "MSRValue": "0x0400100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs)",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.DEMAND_RFO.L3_HIT_E.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0200080002",
+        "MSRValue": "0x0100100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020010",
+        "MSRValue": "0x0200100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.L3_HIT_S.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0080",
+        "MSRValue": "0x0080100100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_F.SNOOP_NONE",
+        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0080200100",
+        "MSRValue": "0x3F80400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080080",
+        "MSRValue": "0x0080400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400122",
+        "MSRValue": "0x0100400100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_RFO.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080100",
+        "MSRValue": "0x3F80020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads  OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L3_DATA_RD.L3_HIT_M.ANY_SNOOP",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F80040080",
+        "MSRValue": "0x1000020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_PF_RFO.PMM_HIT_LOCAL_PMM.SNOOP_NOT_NEEDED",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0100400120",
+        "MSRValue": "0x0800020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD  OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_DATA_RD.SUPPLIER_NONE.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800020491",
+        "MSRValue": "0x0400020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests  OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs  OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L1D_AND_SW.L3_HIT_E.HIT_OTHER_CORE_FWD",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0800080400",
+        "MSRValue": "0x0100020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads  OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.PF_L2_DATA_RD.L3_HIT_F.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_MISS",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0400200010",
+        "MSRValue": "0x0200020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OCR.ALL_READS.L3_HIT_S.SNOOP_MISS",
+        "EventName": "OCR.PF_L3_RFO.SUPPLIER_NONE.SNOOP_NONE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x02001007F7",
+        "MSRValue": "0x0080020100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHNTA instructions executed.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.NTA",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHW instructions executed.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T0",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/pipeline.json b/tools/perf/pmu-events/arch/x86/cascadelakex/pipeline.json
index 023f31c72a42..ca5748120666 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/pipeline.json
@@ -1,148 +1,158 @@
 [
     {
-        "BriefDescription": "Far branch instructions retired.",
+        "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x14",
+        "EventName": "ARITH.DIVIDER_ACTIVE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "All (macro) branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "Errata": "SKL091",
         "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
-        "PEBS": "1",
-        "PublicDescription": "This event counts far branch instructions retired.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x40"
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Counts all (macro) branch instructions retired.",
+        "SampleAfterValue": "400009"
     },
     {
-        "BriefDescription": "Total execution stalls.",
+        "BriefDescription": "All (macro) branch instructions retired.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "PublicDescription": "This is a precise version of BR_INST_RETIRED.ALL_BRANCHES that counts all (macro) branch instructions retired.",
+        "SampleAfterValue": "400009",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
+        "BriefDescription": "Conditional branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.SLOW_LEA",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "BriefDescription": "Not taken branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "10",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "Errata": "SKL091",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.COND_NTAKEN",
+        "PublicDescription": "This event counts not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Thread cycles when thread is not in halt state",
+        "BriefDescription": "Far branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
-        "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
-        "SampleAfterValue": "2000003"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
+        "PEBS": "1",
+        "PublicDescription": "This event counts far branch instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Cycles without actually retired uops.",
+        "BriefDescription": "Direct and indirect near call instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "This event counts cycles without actually retired uops.",
-        "SampleAfterValue": "2000003",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
+        "SampleAfterValue": "100007",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.",
+        "BriefDescription": "Return instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
-        "Invert": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PEBS": "1",
+        "PublicDescription": "This event counts return instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
+        "BriefDescription": "Taken branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "PublicDescription": "This event counts taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
+        "BriefDescription": "Not taken branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xA8",
-        "EventName": "LSD.CYCLES_4_UOPS",
-        "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Core cycles when the thread is not in halt state",
-        "Counter": "Fixed counter 1",
-        "CounterHTOff": "Fixed counter 1",
-        "EventName": "CPU_CLK_UNHALTED.THREAD",
-        "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
+        "PublicDescription": "This event counts not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
+        "BriefDescription": "All mispredicted macro branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
-        "SampleAfterValue": "25003",
-        "UMask": "0x1"
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch.  When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.",
+        "SampleAfterValue": "400009"
     },
     {
-        "BriefDescription": "Direct and indirect near call instructions retired.",
+        "BriefDescription": "Mispredicted macro branch instructions retired.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_CALL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x2"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "PublicDescription": "This is a precise version of BR_MISP_RETIRED.ALL_BRANCHES that counts all mispredicted macro branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.",
+        "BriefDescription": "Mispredicted conditional branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x14",
-        "EventName": "ARITH.DIVIDER_ACTIVE",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
+        "BriefDescription": "Mispredicted direct and indirect near call instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
-        "SampleAfterValue": "25003",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "PublicDescription": "Counts both taken and not taken retired mispredicted direct and indirect near calls, including both register and memory indirect.",
+        "SampleAfterValue": "400009",
         "UMask": "0x2"
     },
     {
@@ -156,217 +166,206 @@
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Increments whenever there is an update to the LBR array.",
+        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xCC",
-        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
-        "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "25003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Instructions retired from execution.",
-        "Counter": "Fixed counter 0",
-        "CounterHTOff": "Fixed counter 0",
-        "EventName": "INST_RETIRED.ANY",
-        "PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.",
-        "SampleAfterValue": "2000003",
+        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "25003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Conditional branch instructions retired.",
+        "AnyThread": "1",
+        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.CONDITIONAL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts conditional branch instructions retired.",
-        "SampleAfterValue": "400009",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "25003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles the issue-stage is waiting for front-end to fetch from resteered path following branch misprediction or machine clear events.",
+        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x80"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "25003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
-        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
+        "BriefDescription": "Reference cycles when the core is not in halt state.",
+        "Counter": "Fixed counter 2",
+        "CounterHTOff": "Fixed counter 2",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'.  The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'.  After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x3"
     },
     {
-        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
+        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "25003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
+        "AnyThread": "1",
+        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
-        "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "25003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
+        "BriefDescription": "Counts when there is a transition from ring 1, 2 or 3 to ring 0.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "5",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x5"
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.RING0_TRANS",
+        "PublicDescription": "Counts when the Current Privilege Level (CPL) transitions from ring 1, 2 or 3 to ring 0 (Kernel).",
+        "SampleAfterValue": "100007"
     },
     {
-        "BriefDescription": "Mispredicted macro branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
-        "PEBS": "2",
-        "PublicDescription": "This is a precise version of BR_MISP_RETIRED.ALL_BRANCHES that counts all mispredicted macro branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x4"
+        "BriefDescription": "Core cycles when the thread is not in halt state",
+        "Counter": "Fixed counter 1",
+        "CounterHTOff": "Fixed counter 1",
+        "EventName": "CPU_CLK_UNHALTED.THREAD",
+        "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "Counter": "Fixed counter 1",
+        "CounterHTOff": "Fixed counter 1",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "BriefDescription": "Thread cycles when thread is not in halt state",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
-        "SampleAfterValue": "25003",
-        "UMask": "0x1"
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
+        "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
+        "SampleAfterValue": "2000003"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
-        "SampleAfterValue": "25003",
-        "UMask": "0x2"
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
+        "SampleAfterValue": "2000003"
     },
     {
-        "BriefDescription": "All (macro) branch instructions retired.",
+        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
-        "PublicDescription": "Counts all (macro) branch instructions retired.",
-        "SampleAfterValue": "400009"
+        "CounterMask": "8",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 0",
+        "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
+        "CounterMask": "1",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 1",
+        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
+        "CounterMask": "16",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 2",
+        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 2.",
+        "CounterMask": "12",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "UMask": "0xc"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 3",
+        "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 3.",
+        "CounterMask": "5",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x5"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 4",
+        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 4.",
+        "CounterHTOff": "0,1,2,3",
+        "CounterMask": "20",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
         "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x14"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 5",
+        "BriefDescription": "Total execution stalls.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
+        "CounterMask": "4",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 6",
+        "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_6",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
+        "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 7",
+        "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_7",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 7.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
+        "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x80"
+        "UMask": "0x4"
     },
     {
         "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.",
@@ -379,37 +378,31 @@
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
+        "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0x5E",
-        "EventName": "RS_EVENTS.EMPTY_END",
-        "Invert": "1",
-        "PublicDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate front-end Latency Bound issues.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
+        "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
+        "BriefDescription": "Cycles where the Store Buffer was full and no outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Number of Uops delivered by the LSD.",
+        "BriefDescription": "Cycles where no uops were executed, the Reservation Station was not empty, the Store Buffer was full and there was no outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA8",
-        "EventName": "LSD.UOPS",
-        "PublicDescription": "Number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
+        "PublicDescription": "Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
@@ -424,117 +417,108 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Taken branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
-        "PEBS": "1",
-        "PublicDescription": "This event counts taken branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.ANY",
-        "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
+        "BriefDescription": "Instructions retired from execution.",
+        "Counter": "Fixed counter 0",
+        "CounterHTOff": "Fixed counter 0",
+        "EventName": "INST_RETIRED.ANY",
+        "PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Resource-related stall cycles",
+        "BriefDescription": "Number of instructions retired. General Counter - architectural event",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xa2",
-        "EventName": "RESOURCE_STALLS.ANY",
-        "PublicDescription": "Counts resource-related stall cycles.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "Errata": "SKL091, SKL044",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "PublicDescription": "Counts the number of instructions (EOMs) retired. Counting covers macro-fused instructions individually (that is, increments by two).",
+        "SampleAfterValue": "2000003"
     },
     {
-        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "CounterMask": "20",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
+        "BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
+        "Counter": "1",
+        "CounterHTOff": "1",
+        "Errata": "SKL091, SKL044",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.PREC_DIST",
+        "PEBS": "2",
+        "PublicDescription": "A version of INST_RETIRED that allows for a more unbiased distribution of samples across instructions retired. It utilizes the Precise Distribution of Instructions Retired (PDIR) feature to mitigate some bias in how retired instructions get sampled.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x14"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles where no uops were executed, the Reservation Station was not empty, the Store Buffer was full and there was no outstanding load.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
-        "PublicDescription": "Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.",
+        "BriefDescription": "Number of cycles using always true condition applied to  PEBS instructions retired event.",
+        "Counter": "0,2,3",
+        "CounterHTOff": "0,2,3",
+        "CounterMask": "10",
+        "Errata": "SKL091, SKL044",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.TOTAL_CYCLES_PS",
+        "Invert": "1",
+        "PEBS": "2",
+        "PublicDescription": "Number of cycles using an always true condition applied to  PEBS instructions retired event. (inst_ret< 16)",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
+        "BriefDescription": "Cycles the issue-stage is waiting for front-end to fetch from resteered path following branch misprediction or machine clear events.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA2",
-        "EventName": "RESOURCE_STALLS.SB",
-        "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x80"
     },
     {
-        "BriefDescription": "Not taken branch instructions retired.",
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread (e.g. misprediction or memory nuke)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
-        "PublicDescription": "This event counts not taken branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x10"
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES",
+        "PublicDescription": "Core cycles the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "12",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
         "SampleAfterValue": "2000003",
-        "UMask": "0xc"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
+        "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
-        "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.NO_SR",
+        "PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Number of instructions retired. General Counter - architectural event",
+        "BriefDescription": "Loads blocked due to overlapping with a preceding store that cannot be forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091, SKL044",
-        "EventCode": "0xC0",
-        "EventName": "INST_RETIRED.ANY_P",
-        "PublicDescription": "Counts the number of instructions (EOMs) retired. Counting covers macro-fused instructions individually (that is, increments by two).",
-        "SampleAfterValue": "2000003"
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.STORE_FORWARD",
+        "PublicDescription": "Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts the number of x87 uops dispatched.",
+        "BriefDescription": "False dependencies in MOB due to partial compare on address.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.X87",
-        "PublicDescription": "Counts the number of x87 uops executed.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
+        "PublicDescription": "Counts false dependencies in MOB when the partial comparison upon loose net check and dependency was resolved by the Enhanced Loose net mechanism. This may not result in high performance penalties. Loose net checks can fail when loads and stores are 4k aliased.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
@@ -547,219 +531,238 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Mispredicted direct and indirect near call instructions retired.",
+        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.NEAR_CALL",
-        "PEBS": "1",
-        "PublicDescription": "Counts both taken and not taken retired mispredicted direct and indirect near calls, including both register and memory indirect.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x2"
+        "CounterMask": "4",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_4_UOPS",
+        "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
+        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.THREAD",
-        "PublicDescription": "Number of uops to be executed per-thread each cycle.",
+        "CounterMask": "1",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_ACTIVE",
+        "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
+        "BriefDescription": "Number of Uops delivered by the LSD.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
+        "EventCode": "0xA8",
+        "EventName": "LSD.UOPS",
+        "PublicDescription": "Number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
+        "BriefDescription": "Number of machine clears (nukes) of any type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0xA8",
-        "EventName": "LSD.CYCLES_ACTIVE",
-        "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).",
-        "SampleAfterValue": "2000003",
+        "EdgeDetect": "1",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.COUNT",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread (e.g. misprediction or memory nuke)",
+        "BriefDescription": "Self-modifying code (SMC) detected.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.RECOVERY_CYCLES",
-        "PublicDescription": "Core cycles the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.SMC",
+        "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times a microcode assist is invoked by HW other than FP-assist. Examples include AD (page Access Dirty) and AVX* related assists.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC1",
+        "EventName": "OTHER_ASSISTS.ANY",
+        "SampleAfterValue": "100003",
+        "UMask": "0x3f"
+    },
+    {
+        "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD",
+        "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "BriefDescription": "Resource-related stall cycles",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
-        "SampleAfterValue": "25003",
+        "EventCode": "0xa2",
+        "EventName": "RESOURCE_STALLS.ANY",
+        "PublicDescription": "Counts resource-related stall cycles.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
+        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "8",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.SB",
+        "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
         "SampleAfterValue": "2000003",
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
-        "Counter": "1",
-        "CounterHTOff": "1",
-        "Errata": "SKL091, SKL044",
-        "EventCode": "0xC0",
-        "EventName": "INST_RETIRED.PREC_DIST",
-        "PEBS": "2",
-        "PublicDescription": "A version of INST_RETIRED that allows for a more unbiased distribution of samples across instructions retired. It utilizes the Precise Distribution of Instructions Retired (PDIR) feature to mitigate some bias in how retired instructions get sampled.",
+        "BriefDescription": "Increments whenever there is an update to the LBR array.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
+        "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Not taken branch instructions retired.",
+        "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xc4",
-        "EventName": "BR_INST_RETIRED.COND_NTAKEN",
-        "PublicDescription": "This event counts not taken branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x10"
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.PAUSE_INST",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_CYCLES",
+        "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
+        "EdgeDetect": "1",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_END",
+        "Invert": "1",
+        "PublicDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate front-end Latency Bound issues.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 0",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a microcode assist is invoked by HW other than FP-assist. Examples include AD (page Access Dirty) and AVX* related assists.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 1",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC1",
-        "EventName": "OTHER_ASSISTS.ANY",
-        "SampleAfterValue": "100003",
-        "UMask": "0x3f"
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles where the Store Buffer was full and no outstanding load.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 2",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 2.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 3",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "16",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 3.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 4",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xCC",
-        "EventName": "ROB_MISC_EVENTS.PAUSE_INST",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 4.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
+        "BriefDescription": "Cycles per thread when uops are executed in port 5",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 6",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x59",
-        "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD",
-        "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_6",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Retirement slots used.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 7",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
-        "PublicDescription": "Counts the retirement slots used.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 7.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x80"
     },
     {
-        "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
+        "BriefDescription": "Number of uops executed on the core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
-        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE",
+        "PublicDescription": "Number of uops executed from any thread.",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Return instructions retired.",
+        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
-        "PEBS": "1",
-        "PublicDescription": "This event counts return instructions retired.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x8"
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
         "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
@@ -772,188 +775,195 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x1"
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of cycles using always true condition applied to  PEBS instructions retired event.",
-        "Counter": "0,2,3",
-        "CounterHTOff": "0,2,3",
-        "CounterMask": "10",
-        "Errata": "SKL091, SKL044",
-        "EventCode": "0xC0",
-        "EventName": "INST_RETIRED.TOTAL_CYCLES_PS",
-        "Invert": "1",
-        "PEBS": "2",
-        "PublicDescription": "Number of cycles using an always true condition applied to  PEBS instructions retired event. (inst_ret< 16)",
+        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "False dependencies in MOB due to partial compare on address.",
+        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x07",
-        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
-        "PublicDescription": "Counts false dependencies in MOB when the partial comparison upon loose net check and dependency was resolved by the Enhanced Loose net mechanism. This may not result in high performance penalties. Loose net checks can fail when loads and stores are 4k aliased.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
+        "Invert": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of machine clears (nukes) of any type.",
+        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.COUNT",
-        "SampleAfterValue": "100003",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
+        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
-        "Counter": "Fixed counter 1",
-        "CounterHTOff": "Fixed counter 1",
-        "EventName": "CPU_CLK_UNHALTED.THREAD_ANY",
+        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Loads blocked due to overlapping with a preceding store that cannot be forwarded.",
+        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x03",
-        "EventName": "LD_BLOCKS.STORE_FORWARD",
-        "PublicDescription": "Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
+        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
-        "SampleAfterValue": "25003",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Reference cycles when the core is not in halt state.",
-        "Counter": "Fixed counter 2",
-        "CounterHTOff": "Fixed counter 2",
-        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
-        "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'.  The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'.  After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
+        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x3"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "All mispredicted macro branch instructions retired.",
+        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
-        "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch.  When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.",
-        "SampleAfterValue": "400009"
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.THREAD",
+        "PublicDescription": "Number of uops to be executed per-thread each cycle.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use",
+        "BriefDescription": "Counts the number of x87 uops dispatched.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x03",
-        "EventName": "LD_BLOCKS.NO_SR",
-        "PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.X87",
+        "PublicDescription": "Counts the number of x87 uops executed.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Self-modifying code (SMC) detected.",
+        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.SMC",
-        "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.ANY",
+        "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
-        "SampleAfterValue": "2000003"
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.SLOW_LEA",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5E",
-        "EventName": "RS_EVENTS.EMPTY_CYCLES",
-        "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts when there is a transition from ring 1, 2 or 3 to ring 0.",
+        "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.RING0_TRANS",
-        "PublicDescription": "Counts when the Current Privilege Level (CPL) transitions from ring 1, 2 or 3 to ring 0 (Kernel).",
-        "SampleAfterValue": "100007"
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
+        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "All (macro) branch instructions retired.",
+        "BriefDescription": "Number of macro-fused uops retired. (non precise)",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
-        "PEBS": "2",
-        "PublicDescription": "This is a precise version of BR_INST_RETIRED.ALL_BRANCHES that counts all (macro) branch instructions retired.",
-        "SampleAfterValue": "400009",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.MACRO_FUSED",
+        "PublicDescription": "Counts the number of macro-fused uops retired. (non precise)",
+        "SampleAfterValue": "2000003",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
+        "BriefDescription": "Retirement slots used.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
-        "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
+        "PublicDescription": "Counts the retirement slots used.",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of uops executed on the core.",
+        "BriefDescription": "Cycles without actually retired uops.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE",
-        "PublicDescription": "Number of uops executed from any thread.",
+        "CounterMask": "1",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "This event counts cycles without actually retired uops.",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
+        "BriefDescription": "Cycles with less than 10 actually retired uops.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
+        "CounterMask": "10",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json
index 4ba9e6d9f25e..2600fd8d7a54 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-memory.json
@@ -65,15 +65,6 @@
         "Unit": "iMC"
     },
     {
-        "BriefDescription": "Pre-charge for writes",
-        "Counter": "0,1,2,3",
-        "EventCode": "0x2",
-        "EventName": "UNC_M_PRE_COUNT.WR",
-        "PerPkg": "1",
-        "UMask": "0x8",
-        "Unit": "iMC"
-    },
-    {
         "BriefDescription": "Write requests allocated in the PMM Write Pending Queue for Intel Optane DC persistent memory",
         "Counter": "0,1,2,3",
         "EventCode": "0xE3",
@@ -90,32 +81,32 @@
         "Unit": "iMC"
     },
     {
-        "BriefDescription": "Intel Optane DC persistent memory bandwidth read (MB). Derived from unc_m_pmm_rpq_inserts",
+        "BriefDescription": "Intel Optane DC persistent memory bandwidth read (MB/sec). Derived from unc_m_pmm_rpq_inserts",
         "Counter": "0,1,2,3",
         "EventCode": "0xE3",
         "EventName": "UNC_M_PMM_BANDWIDTH.READ",
         "PerPkg": "1",
-        "ScaleUnit": "6.103515625E-5MB",
+        "ScaleUnit": "6.103515625E-5MB/sec",
         "Unit": "iMC"
     },
     {
-        "BriefDescription": "Intel Optane DC persistent memory bandwidth write (MB). Derived from unc_m_pmm_wpq_inserts",
+        "BriefDescription": "Intel Optane DC persistent memory bandwidth write (MB/sec). Derived from unc_m_pmm_wpq_inserts",
         "Counter": "0,1,2,3",
         "EventCode": "0xE7",
         "EventName": "UNC_M_PMM_BANDWIDTH.WRITE",
         "PerPkg": "1",
-        "ScaleUnit": "6.103515625E-5MB",
+        "ScaleUnit": "6.103515625E-5MB/sec",
         "Unit": "iMC"
     },
     {
-        "BriefDescription": "Intel Optane DC persistent memory bandwidth total (MB). Derived from unc_m_pmm_rpq_inserts",
+        "BriefDescription": "Intel Optane DC persistent memory bandwidth total (MB/sec). Derived from unc_m_pmm_rpq_inserts",
         "Counter": "0,1,2,3",
         "EventCode": "0xE3",
         "EventName": "UNC_M_PMM_BANDWIDTH.TOTAL",
         "MetricExpr": "UNC_M_PMM_RPQ_INSERTS + UNC_M_PMM_WPQ_INSERTS",
         "MetricName": "UNC_M_PMM_BANDWIDTH.TOTAL",
         "PerPkg": "1",
-        "ScaleUnit": "6.103515625E-5MB",
+        "ScaleUnit": "6.103515625E-5MB/sec",
         "Unit": "iMC"
     },
     {
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
index 0cd083839e75..3be09986ce8b 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/uncore-other.json
@@ -104,15 +104,6 @@
         "Unit": "CHA"
     },
     {
-        "BriefDescription": "write requests from remote home agent",
-        "Counter": "0,1,2,3",
-        "EventCode": "0x50",
-        "EventName": "UNC_CHA_REQUESTS.WRITES_REMOTE",
-        "PerPkg": "1",
-        "UMask": "0x08",
-        "Unit": "CHA"
-    },
-    {
         "BriefDescription": "UPI interconnect send bandwidth for payload. Derived from unc_upi_txl_flits.all_data",
         "Counter": "0,1,2,3",
         "EventCode": "0x2",
@@ -544,7 +535,7 @@
         "EventName": "UNC_CHA_TOR_INSERTS.IA_MISS_DRD",
         "Filter": "config1=0x40433",
         "PerPkg": "1",
-        "PublicDescription": "TOR Inserts : DRds issued by iA Cores that Missed the LLC : Counts the number of entries successfully inserted into the TOR that match qualifications specified by the subevent.   Does not include addressless requests such as locks and interrupts.",
+        "PublicDescription": "TOR Inserts : DRds issued by iA Cores that Missed the LLC : Counts the number of entries successfuly inserted into the TOR that match qualifications specified by the subevent.   Does not include addressless requests such as locks and interrupts.",
         "UMask": "0x21",
         "Unit": "CHA"
     },
@@ -568,6 +559,98 @@
         "Unit": "IIO"
     },
     {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART0",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x01",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART1",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x02",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART2",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x04",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART3",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x08",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART0",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+        "UMask": "0x01",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART1",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+        "UMask": "0x02",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART2",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+        "UMask": "0x04",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART3",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+        "UMask": "0x08",
+        "Unit": "IIO"
+    },
+    {
         "BriefDescription": "Read request for 4 bytes made by the CPU to IIO Part0",
         "Counter": "2,3",
         "EventCode": "0xC0",
@@ -1240,6 +1323,64 @@
         "Unit": "IIO"
     },
     {
+        "BriefDescription": "Total IRP occupancy of inbound read and write requests.",
+        "Counter": "0,1",
+        "EventCode": "0xF",
+        "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.MEM",
+        "PerPkg": "1",
+        "PublicDescription": "Total IRP occupancy of inbound read and write requests.  This is effectively the sum of read occupancy and write occupancy.",
+        "UMask": "0x4",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline.",
+        "Counter": "0,1",
+        "EventCode": "0x10",
+        "EventName": "UNC_I_COHERENT_OPS.PCITOM",
+        "PerPkg": "1",
+        "PublicDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline to coherent memory, without a RFO.  PCIITOM is a speculative Invalidate to Modified command that requests ownership of the cacheline and does not move data from the mesh to IRP cache.",
+        "UMask": "0x10",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline.",
+        "Counter": "0,1",
+        "EventCode": "0x10",
+        "EventName": "UNC_I_COHERENT_OPS.RFO",
+        "PerPkg": "1",
+        "PublicDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline to coherent memory.  RFO is a Read For Ownership command that requests ownership of the cacheline and moves data from the mesh to IRP cache.",
+        "UMask": "0x8",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Inbound read requests received by the IRP and inserted into the FAF queue.",
+        "Counter": "0,1",
+        "EventCode": "0x18",
+        "EventName": "UNC_I_FAF_INSERTS",
+        "PerPkg": "1",
+        "PublicDescription": "Inbound read requests to coherent memory, received by the IRP and inserted into the Fire and Forget queue (FAF), a queue used for processing inbound reads in the IRP.",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Occupancy of the IRP FAF queue.",
+        "Counter": "0,1",
+        "EventCode": "0x19",
+        "EventName": "UNC_I_FAF_OCCUPANCY",
+        "PerPkg": "1",
+        "PublicDescription": "Occupancy of the IRP Fire and Forget (FAF) queue, a queue used for processing inbound reads in the IRP.",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Inbound write (fast path) requests received by the IRP.",
+        "Counter": "0,1",
+        "EventCode": "0x11",
+        "EventName": "UNC_I_TRANSACTIONS.WR_PREF",
+        "PerPkg": "1",
+        "PublicDescription": "Inbound write (fast path) requests to coherent memory, received by the IRP resulting in write ownership requests issued by IRP to the mesh.",
+        "UMask": "0x8",
+        "Unit": "IRP"
+    },
+    {
         "BriefDescription": "Traffic in which the M2M to iMC Bypass was not taken",
         "Counter": "0,1,2,3",
         "EventCode": "0x22",
diff --git a/tools/perf/pmu-events/arch/x86/cascadelakex/virtual-memory.json b/tools/perf/pmu-events/arch/x86/cascadelakex/virtual-memory.json
index d13b4111eb52..792ca39f013a 100644
--- a/tools/perf/pmu-events/arch/x86/cascadelakex/virtual-memory.json
+++ b/tools/perf/pmu-events/arch/x86/cascadelakex/virtual-memory.json
@@ -1,35 +1,5 @@
 [
     {
-        "BriefDescription": "Page walk completed due to a demand data store to a 2M/4M page",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 2M/4M pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_PENDING",
-        "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts completed page walks (2M and 4M page sizes) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB. The page walk can end with or without a fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0xe"
-    },
-    {
         "BriefDescription": "Load misses in all DTLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -40,13 +10,13 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "STLB flush attempts",
+        "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xBD",
-        "EventName": "TLB_FLUSH.STLB_ANY",
-        "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",
-        "SampleAfterValue": "100007",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
+        "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
+        "SampleAfterValue": "2000003",
         "UMask": "0x20"
     },
     {
@@ -61,44 +31,34 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data store to a 1G page",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 1G pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Store misses in all DTLB levels that cause page walks",
+        "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK",
-        "PublicDescription": "Counts demand data stores that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0xe"
     },
     {
-        "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.",
+        "BriefDescription": "Page walk completed due to a demand data load to a 1G page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAE",
-        "EventName": "ITLB.ITLB_FLUSH",
-        "PublicDescription": "Counts the number of flushes of the big or small ITLB pages. Counting include both TLB Flush (covering all sets) and TLB Set Clear (set-specific).",
-        "SampleAfterValue": "100007",
-        "UMask": "0x1"
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks  (1G sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Page walk completed due to a demand data load to a 2M/4M page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
-        "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
+        "PublicDescription": "Counts completed page walks  (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x4"
     },
     {
         "BriefDescription": "Page walk completed due to a demand data load to a 4K page",
@@ -106,21 +66,11 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x08",
         "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
+        "PublicDescription": "Counts completed page walks  (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data load to a 2M/4M page",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 2M/4M pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
         "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -131,14 +81,24 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a EPT (Extended Page Table) walk for any request type.",
+        "BriefDescription": "Store misses in all DTLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x4F",
-        "EventName": "EPT.WALK_PENDING",
-        "PublicDescription": "Counts cycles for each PMH (Page Miss Handler) that is busy with an EPT (Extended Page Table) walk for any request type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK",
+        "PublicDescription": "Counts demand data stores that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Stores that miss the DTLB and hit the STLB.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.STLB_HIT",
+        "PublicDescription": "Stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
     },
     {
         "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
@@ -152,34 +112,34 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Misses at all ITLB levels that cause page walks",
+        "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK",
-        "PublicDescription": "Counts page walks of any page size (4K/2M/4M/1G) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB, but the walk need not have completed.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0xe"
     },
     {
-        "BriefDescription": "Stores that miss the DTLB and hit the STLB.",
+        "BriefDescription": "Page walk completed due to a demand data store to a 1G page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.STLB_HIT",
-        "PublicDescription": "Stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks  (1G sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x20"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "BriefDescription": "Page walk completed due to a demand data store to a 2M/4M page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts demand data loads that caused a completed page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
+        "PublicDescription": "Counts completed page walks  (2M/4M sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0xe"
+        "UMask": "0x4"
     },
     {
         "BriefDescription": "Page walk completed due to a demand data store to a 4K page",
@@ -187,29 +147,49 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x49",
         "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
+        "PublicDescription": "Counts completed page walks  (4K sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts completed page walks (4K page size) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB. The page walk can end with or without a fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
+        "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (1G)",
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a EPT (Extended Page Table) walk for any request type.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x4f",
+        "EventName": "EPT.WALK_PENDING",
+        "PublicDescription": "Counts cycles for each PMH (Page Miss Handler) that is busy with an EPT (Extended Page Table) walk for any request type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xAE",
+        "EventName": "ITLB.ITLB_FLUSH",
+        "PublicDescription": "Counts the number of flushes of the big or small ITLB pages. Counting include both TLB Flush (covering all sets) and TLB Set Clear (set-specific).",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Misses at all ITLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts store misses in all DTLB levels that cause a completed page walk (1G page size). The page walk can end with or without a fault.",
+        "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK",
+        "PublicDescription": "Counts page walks of any page size (4K/2M/4M/1G) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB, but the walk need not have completed.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.",
@@ -221,13 +201,34 @@
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data load to a 1G page",
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "2000003",
+        "CounterMask": "1",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_ACTIVE",
+        "PublicDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (1G)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks (1G page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
         "UMask": "0x8"
     },
     {
@@ -236,42 +237,31 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x85",
         "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts code misses in all ITLB levels that caused a completed page walk (2M and 4M page sizes). The page walk can end with or without a fault.",
+        "PublicDescription": "Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts demand data stores that caused a completed page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
+        "PublicDescription": "Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0xe"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
         "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_ACTIVE",
-        "PublicDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "EventName": "ITLB_MISSES.WALK_PENDING",
+        "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture.",
         "SampleAfterValue": "100003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
-        "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
         "BriefDescription": "DTLB flush attempts of the thread-specific entries",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -280,5 +270,15 @@
         "PublicDescription": "Counts the number of DTLB flush attempts of the thread-specific entries.",
         "SampleAfterValue": "100007",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "STLB flush attempts",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xBD",
+        "EventName": "TLB_FLUSH.STLB_ANY",
+        "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",
+        "SampleAfterValue": "100007",
+        "UMask": "0x20"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/cache.json b/tools/perf/pmu-events/arch/x86/elkhartlake/cache.json
new file mode 100644
index 000000000000..734be4ea095f
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/cache.json
@@ -0,0 +1,226 @@
+[
+    {
+        "BriefDescription": "Counts the number of first level data cacheline (dirty) evictions caused by misses, stores, and prefetches.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x51",
+        "EventName": "DL1.DIRTY_EVICTION",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of first level data cacheline (dirty) evictions caused by misses, stores, and prefetches.  Does not count evictions or dirty writebacks caused by snoops.  Does not count a replacement unless a (dirty) line was written back.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of cacheable memory requests that miss in the LLC. Counts on a per core basis.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x2e",
+        "EventName": "LONGEST_LAT_CACHE.MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cacheable memory requests that miss in the Last Level Cache (LLC). If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Counts the number of cacheable memory requests that access the LLC. Counts on a per core basis.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x2e",
+        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cacheable memory requests that access the Last Level Cache (LLC). Requests include demand loads, reads for ownership (RFO), instruction fetches and L1 HW prefetches. If the platform has an L3 cache, the LLC is the L3 cache, otherwise it is the L2 cache. Counts on a per core basis.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4f"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in DRAM or MMIO (Non-DRAM).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.IFETCH_DRAM_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles a core is stalled due to an instruction cache or translation lookaside buffer (TLB) access which hit in DRAM or MMIO (non-DRAM).",
+        "SampleAfterValue": "200003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.IFETCH_L2_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles a core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) access which hit in the L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to an instruction cache or TLB miss which hit in the LLC or other core with HITE/F/M.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.IFETCH_LLC_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles a core is stalled due to an instruction cache or Translation Lookaside Buffer (TLB) access which hit in the Last Level Cache (LLC) or other core with HITE/F/M.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load miss which hit in DRAM or MMIO (Non-DRAM).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.LOAD_DRAM_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.LOAD_L2_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles a core is stalled due to a demand load which hit in the L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the core is stalled due to a demand load which hit in the LLC or other core with HITE/F/M.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.LOAD_LLC_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles a core is stalled due to a demand load which hit in the Last Level Cache (LLC) or other core with HITE/F/M.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles a core is stalled due to a store buffer being full.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "MEM_BOUND_STALLS.STORE_BUFFER_FULL",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Counts the number of load ops retired that hit in DRAM.",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.DRAM_HIT",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired that hit in the L1 data cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L1_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired that miss in the L1 data cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L1_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired that hit in the L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L2_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired that miss in the L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L2_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired that hit in the L3 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_UOPS_RETIRED.L3_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of load uops retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.ALL_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of load uops retired.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "Counts the number of store uops retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.ALL_STORES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of store uops retired.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x82"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to instruction cache misses.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.ICACHE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x20"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/ehl-metrics.json b/tools/perf/pmu-events/arch/x86/elkhartlake/ehl-metrics.json
new file mode 100644
index 000000000000..b6f7126be1fd
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/ehl-metrics.json
@@ -0,0 +1,57 @@
+[
+    {
+        "MetricExpr": "INST_RETIRED.ANY / cycles",
+        "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
+        "MetricName": "IPC"
+    },
+    {
+        "MetricExpr": "1 / IPC",
+        "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
+        "MetricName": "CPI"
+    },
+    {
+        "MetricExpr": "cycles",
+        "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.",
+        "MetricName": "CLKS"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
+        "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
+        "MetricName": "IpBranch"
+    },
+    {
+        "MetricExpr": "INST_RETIRED.ANY",
+        "BriefDescription": "Total number of retired Instructions",
+        "MetricName": "Instructions"
+    },
+    {
+        "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 ",
+        "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
+        "MetricName": "L3_Cache_Fill_BW"
+    },
+    {
+        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
+        "BriefDescription": "Average CPU Utilization",
+        "MetricName": "CPU_Utilization"
+    },
+    {
+        "MetricExpr": "(cycles / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 ",
+        "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
+        "MetricName": "Average_Frequency"
+    },
+    {
+        "MetricExpr": "cycles / CPU_CLK_UNHALTED.REF_TSC",
+        "BriefDescription": "Average Frequency Utilization relative nominal frequency",
+        "MetricName": "Turbo_Utilization"
+    },
+    {
+        "MetricExpr": "cycles:k / cycles",
+        "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode",
+        "MetricName": "Kernel_Utilization"
+    }
+]
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/floating-point.json b/tools/perf/pmu-events/arch/x86/elkhartlake/floating-point.json
new file mode 100644
index 000000000000..2515b9aa6e66
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/floating-point.json
@@ -0,0 +1,24 @@
+[
+    {
+        "BriefDescription": "Counts the number of cycles the floating point divider is busy.  Does not imply a stall waiting for the divider.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcd",
+        "EventName": "CYCLES_DIV_BUSY.FPDIV",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of floating point divide uops retired (x87 and SSE, including x87 sqrt).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.FPDIV",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/frontend.json b/tools/perf/pmu-events/arch/x86/elkhartlake/frontend.json
new file mode 100644
index 000000000000..b7b8cb7bd868
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/frontend.json
@@ -0,0 +1,93 @@
+[
+    {
+        "BriefDescription": "Counts the total number of BACLEARS.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.ANY",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of BACLEARS, which occur when the Branch Target Buffer (BTB) prediction or lack thereof, was corrected by a later branch predictor in the frontend.  Includes BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of BACLEARS due to a conditional jump.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.COND",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of BACLEARS due to an indirect branch.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.INDIRECT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of BACLEARS due to a return branch.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.RETURN",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of BACLEARS due to a non-indirect, non-conditional jump.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.UNCOND",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of times a decode restriction reduces the decode throughput due to wrong instruction length prediction.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe9",
+        "EventName": "DECODE_RESTRICTION.PREDECODE_WRONG",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of requests to the instruction cache for one or more bytes of a cache line.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "ICACHE.ACCESSES",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of requests to the instruction cache.  The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line or byte chunk count as one.  Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Counts the number of instruction cache misses.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "ICACHE.MISSES",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of missed requests to the instruction cache.  The event only counts new cache line accesses, so that multiple back to back fetches to the exact same cache line and byte chunk count as one.  Specifically, the event counts when accesses from sequential code crosses the cache line boundary, or when a branch target is moved to a new line or to a non-sequential byte chunk of the same line.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/memory.json b/tools/perf/pmu-events/arch/x86/elkhartlake/memory.json
new file mode 100644
index 000000000000..4e4eab23a300
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/memory.json
@@ -0,0 +1,86 @@
+[
+    {
+        "BriefDescription": "Counts the number of memory ordering machine clears triggered by a snoop from an external agent.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of memory ordering machine clears triggered by a snoop from an external agent. Does not count internally generated machine clears such as those due to disambiguations.",
+        "SampleAfterValue": "20003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were not supplied by the L3 cache.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that were not supplied by the L3 cache.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.L3_MISS_LOCAL",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_MISS",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.L3_MISS_LOCAL",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_MISS_LOCAL",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were not supplied by the L3 cache.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that were not supplied by the L3 cache.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_RFO.L3_MISS_LOCAL",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x2104000002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/other.json b/tools/perf/pmu-events/arch/x86/elkhartlake/other.json
new file mode 100644
index 000000000000..627691404155
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/other.json
@@ -0,0 +1,424 @@
+[
+    {
+        "BriefDescription": "Counts the total number of BTCLEARS.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe8",
+        "EventName": "BTCLEAR.ANY",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of BTCLEARS which occurs when the Branch Target Buffer (BTB) predicts a taken branch.",
+        "SampleAfterValue": "200003"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event BUS_LOCK.SELF_LOCKS",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EdgeDetect": "1",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.ALL",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted cycles a core is blocked due to an accepted lock issued by other cores.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.BLOCK_CYCLES",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of unhalted cycles a core is blocked due to an accepted lock issued by other cores. Counts on a per core basis.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event BUS_LOCK.BLOCK_CYCLES",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.CYCLES_OTHER_BLOCK",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event BUS_LOCK.LOCK_CYCLES",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.CYCLES_SELF_BLOCK",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted cycles a core is blocked due to an accepted lock it issued.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.LOCK_CYCLES",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of unhalted cycles a core is blocked due to an accepted lock it issued. Counts on a per core basis.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of bus locks a core issued its self (e.g. lock to UC or Split Lock) and does not include cache locks.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EdgeDetect": "1",
+        "EventCode": "0x63",
+        "EventName": "BUS_LOCK.SELF_LOCKS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of bus locks a core issued its self (e.g. lock to UC or Split Lock) and does not include cache locks. Counts on a per core basis.",
+        "SampleAfterValue": "200003"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event MEM_BOUND_STALLS.LOAD_DRAM_HIT",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "C0_STALLS.LOAD_DRAM_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event MEM_BOUND_STALLS.LOAD_L2_HIT",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "C0_STALLS.LOAD_L2_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event MEM_BOUND_STALLS.LOAD_LLC_HIT",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x34",
+        "EventName": "C0_STALLS.LOAD_LLC_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of core cycles during which interrupts are masked (disabled).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcb",
+        "EventName": "HW_INTERRUPTS.MASKED",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of core cycles during which interrupts are masked (disabled). Increments by 1 each core cycle that EFLAGS.IF is 0, regardless of whether interrupts are pending or not.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of core cycles during which there are pending interrupts while interrupts are masked (disabled).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcb",
+        "EventName": "HW_INTERRUPTS.PENDING_AND_MASKED",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of core cycles during which there are pending interrupts while interrupts are masked (disabled). Increments by 1 each core cycle that both EFLAGS.IF is 0 and an INTR is pending (which means the APIC is telling the ROB to cause an INTR). This event does not increment if EFLAGS.IF is 0 but all interrupt in the APICs Interrupt Request Register (IRR) are inhibited by the PPR (thus either by ISRV or TPR)  because in these cases the interrupts would be held up in the APIC and would not be pended to the ROB. This event does count when an interrupt is only inhibited by MOV/POP SS state machines or the STI state machine. These extra inhibits only last for a single instructions and would not be important.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of hardware interrupts received by the processor.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcb",
+        "EventName": "HW_INTERRUPTS.RECEIVED",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "203",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts cacheable demand data reads, L1 data cache hardware prefetches and software prefetches (except PREFETCHW) that have any type of response.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_AND_L1PF_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event OCR.DEMAND_DATA_AND_L1PF_RD.ANY_RESPONSE",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_DATA_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts demand reads for ownership (RFO) and software prefetches for exclusive ownership (PREFETCHW) that have any type of response.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0XB7",
+        "EventName": "OCR.DEMAND_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the total number of issue slots that were not consumed by the backend because allocation is stalled due to a mispredicted jump or a machine clear.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x73",
+        "EventName": "TOPDOWN_BAD_SPECULATION.ALL",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of issue slots that were not consumed by the backend because allocation is stalled due to a mispredicted jump or a machine clear. Only issue slots wasted due to fast nukes such as memory ordering nukes are counted. Other nukes are not accounted for. Counts all issue slots blocked during this recovery window including relevant microcode flows and while uops are not yet available in the instruction queue (IQ). Also includes the issue slots that were consumed by the backend but were thrown away because they were younger than the mispredict or machine clear.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to fast nukes such as memory ordering and memory disambiguation machine clears.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x73",
+        "EventName": "TOPDOWN_BAD_SPECULATION.FASTNUKE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the total number of issue slots that were not consumed by the backend because allocation is stalled due to a machine clear (nuke) of any kind including memory ordering and memory disambiguation.",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x73",
+        "EventName": "TOPDOWN_BAD_SPECULATION.MACHINE_CLEARS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to branch mispredicts.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x73",
+        "EventName": "TOPDOWN_BAD_SPECULATION.MISPREDICT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event TOPDOWN_BAD_SPECULATION.FASTNUKE",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x73",
+        "EventName": "TOPDOWN_BAD_SPECULATION.MONUKE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the total number of issue slots every cycle that were not consumed by the backend due to backend stalls.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.ALL",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to certain allocation restrictions.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.ALLOC_RESTRICTIONS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to memory reservation stalls in which a scheduler is not able to accept uops.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.MEM_SCHEDULER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to IEC or FPC RAT stalls, which can be due to FIQ or IEC reservation stalls in which the integer, floating point or SIMD scheduler is not able to accept uops.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.NON_MEM_SCHEDULER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to the physical register file unable to accept an entry (marble stalls).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.REGISTER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to the reorder buffer being full (ROB stalls).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.REORDER_BUFFER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to scoreboards from the instruction queue (IQ), jump execution unit (JEU), or microcode sequencer (MS).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.SERIALIZATION",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "This event is deprecated.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x74",
+        "EventName": "TOPDOWN_BE_BOUND.STORE_BUFFER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not consumed by the backend due to frontend stalls.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.ALL",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to BACLEARS.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.BRANCH_DETECT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to BACLEARS, which occurs when the Branch Target Buffer (BTB) prediction or lack thereof, was corrected by a later branch predictor in the frontend. Includes BACLEARS due to all branch types including conditional and unconditional jumps, returns, and indirect branches.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to BTCLEARS.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.BRANCH_RESTEER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to BTCLEARS, which occurs when the Branch Target Buffer (BTB) predicts a taken branch.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to the microcode sequencer (MS).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.CISC",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to decode stalls.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.DECODE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to ITLB misses.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.ITLB",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to Instruction Table Lookaside Buffer (ITLB) misses.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to other common frontend stalls not categorized.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.OTHER",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts the number of issue slots every cycle that were not delivered by the frontend due to wrong predecodes.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x71",
+        "EventName": "TOPDOWN_FE_BOUND.PREDECODE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the total number of consumed retirement slots.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc2",
+        "EventName": "TOPDOWN_RETIRING.ALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json b/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json
new file mode 100644
index 000000000000..41e5dfad8f51
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/pipeline.json
@@ -0,0 +1,278 @@
+[
+    {
+        "BriefDescription": "Counts the total number of branch instructions retired for all branch types.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of instructions in which the instruction pointer (IP) of the processor is resteered due to a branch instruction and the branch instruction successfully retires.  All branch type instructions are accounted for.",
+        "SampleAfterValue": "200003"
+    },
+    {
+        "BriefDescription": "Counts the number of near CALL branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xf9"
+    },
+    {
+        "BriefDescription": "Counts the number of far branch instructions retired, includes far jump, far call and return, and interrupt call and return.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xbf"
+    },
+    {
+        "BriefDescription": "Counts the number of near indirect CALL branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.IND_CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xfb"
+    },
+    {
+        "BriefDescription": "Counts the number of retired JCC (Jump on Conditional Code) branch instructions retired, includes both taken and not taken branches.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.JCC",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x7e"
+    },
+    {
+        "BriefDescription": "Counts the number of near indirect JMP and near indirect CALL branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.NON_RETURN_IND",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xeb"
+    },
+    {
+        "BriefDescription": "Counts the number of near relative CALL branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.REL_CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xfd"
+    },
+    {
+        "BriefDescription": "Counts the number of near RET branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.RETURN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xf7"
+    },
+    {
+        "BriefDescription": "Counts the number of taken JCC (Jump on Conditional Code) branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.TAKEN_JCC",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xfe"
+    },
+    {
+        "BriefDescription": "Counts the total number of mispredicted branch instructions retired for all branch types.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of mispredicted branch instructions retired.  All branch type instructions are accounted for.  Prediction of the branch target address enables the processor to begin executing instructions before the non-speculative execution path is known. The branch prediction unit (BPU) predicts the target address based on the instruction pointer (IP) of the branch and on the execution path through which execution reached this IP.    A branch misprediction occurs when the prediction is wrong, and results in discarding all instructions executed in the speculative path and re-fetching from the correct path.",
+        "SampleAfterValue": "200003"
+    },
+    {
+        "BriefDescription": "Counts the number of mispredicted near indirect CALL branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.IND_CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xfb"
+    },
+    {
+        "BriefDescription": "Counts the number of mispredicted JCC (Jump on Conditional Code) branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.JCC",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x7e"
+    },
+    {
+        "BriefDescription": "Counts the number of mispredicted near RET branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.RETURN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xf7"
+    },
+    {
+        "BriefDescription": "Counts the number of mispredicted taken JCC (Jump on Conditional Code) branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.TAKEN_JCC",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0xfe"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted core clock cycles. (Fixed event)",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 1",
+        "EventName": "CPU_CLK_UNHALTED.CORE",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "33",
+        "PublicDescription": "Counts the number of core cycles while the core is not in a halt state.  The core enters the halt state when it is running the HLT instruction. The core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses fixed counter 1.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted core clock cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.CORE_P",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of core cycles while the core is not in a halt state.  The core enters the halt state when it is running the HLT instruction. The core frequency may change from time to time. For this reason this event may have a changing ratio with regards to time. This event uses a programmable general purpose performance counter.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted reference clock cycles at TSC frequency.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.REF",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is not affected by core frequency changes and increments at a fixed frequency that is also used for the Time Stamp Counter (TSC). This event uses fixed counter 2.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted reference clock cycles at TSC frequency. (Fixed event)",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 2",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "34",
+        "PublicDescription": "Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction. This event is not affected by core frequency changes and increments at a fixed frequency that is also used for the Time Stamp Counter (TSC). This event uses fixed counter 2.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Counts the number of unhalted reference clock cycles at TSC frequency.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC_P",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of reference cycles that the core is not in a halt state. The core enters the halt state when it is running the HLT instruction.  This event is not affected by core frequency changes and increments at a fixed frequency that is also used for the Time Stamp Counter (TSC). This event uses a programmable general purpose performance counter.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "This event is deprecated.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcd",
+        "EventName": "CYCLES_DIV_BUSY.ANY",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Counts the number of cycles the integer divider is busy.  Does not imply a stall waiting for the divider.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xcd",
+        "EventName": "CYCLES_DIV_BUSY.IDIV",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the total number of instructions retired. (Fixed event)",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 0",
+        "EventName": "INST_RETIRED.ANY",
+        "PEBS": "1",
+        "PEBScounters": "32",
+        "PublicDescription": "Counts the total number of instructions that retired. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. This event continues counting during hardware interrupts, traps, and inside interrupt handlers. This event uses fixed counter 0.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the total number of instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of instructions that retired. For instructions that consist of multiple uops, this event counts the retirement of the last uop of the instruction. This event continues counting during hardware interrupts, traps, and inside interrupt handlers. This event uses a programmable general purpose performance counter.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Counts the total number of machine clears including memory ordering, memory disambiguation, self-modifying code, page faults and floating point assist.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.ANY",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "20003"
+    },
+    {
+        "BriefDescription": "Counts the number of uops that are from complex flows issued by the micro-sequencer (MS).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.MS",
+        "PDIR_COUNTER": "na",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of uops that are from complex flows issued by the Microcode Sequencer (MS). This includes uops from flows due to complex instructions, faults, assists, and inserted flows.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/elkhartlake/virtual-memory.json b/tools/perf/pmu-events/arch/x86/elkhartlake/virtual-memory.json
new file mode 100644
index 000000000000..c58b589ff80f
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/elkhartlake/virtual-memory.json
@@ -0,0 +1,273 @@
+[
+    {
+        "BriefDescription": "Counts the number of page walks due to loads that miss the PDE (Page Directory Entry) cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.PDE_CACHE_MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts the number of first level TLB misses but second level hits due to loads that did not start a page walk. Account for all pages sizes. Will result in a DTLB write from STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to load DTLB misses to any page size.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to loads (including SW prefetches) whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to any page size. Includes page walks that page fault.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to load DTLB misses to a 2M or 4M page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to loads (including SW prefetches) whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 2M or 4M pages. Includes page walks that page fault.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to load DTLB misses to a 4K page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to loads (including SW prefetches) whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 4K pages. Includes page walks that page fault.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for loads every cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_PENDING",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for loads every cycle.  A page walk is outstanding from start till PMH becomes idle again (ready to serve next walk). Includes EPT-walk intervals.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks due to stores that miss the PDE (Page Directory Entry) cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.PDE_CACHE_MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks due to storse that miss the PDE (Page Directory Entry) cache.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to store DTLB misses to a 2M or 4M page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to stores whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 2M or 4M pages.  Includes page walks that page fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to store DTLB misses to a 4K page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to stores whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 4K pages.  Includes page walks that page fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for stores every cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for stores every cycle.  A page walk is outstanding from start till PMH becomes idle again (ready to serve next walk). Includes EPT-walk intervals.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of Extended Page Directory Entry hits.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4f",
+        "EventName": "EPT.EPDE_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of Extended Page Directory Entry hits.  The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of Extended Page Directory Entry misses.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4f",
+        "EventName": "EPT.EPDE_MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number Extended Page Directory Entry misses.  The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of Extended Page Directory Pointer Entry hits.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4f",
+        "EventName": "EPT.EPDPE_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number Extended Page Directory Pointer Entry hits.  The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of Extended Page Directory Pointer Entry misses.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4f",
+        "EventName": "EPT.EPDPE_MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number Extended Page Directory Pointer Entry misses.  The Extended Page Directory cache is used by Virtual Machine operating systems while the guest operating systems use the standard TLB caches.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts the number of times there was an ITLB miss and a new translation was filled into the ITLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x81",
+        "EventName": "ITLB.FILLS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times the machine was unable to find a translation in the Instruction Translation Lookaside Buffer (ITLB) and a new translation was filled into the ITLB. The event is speculative in nature, but will not count translations (page walks) that are begun and not finished, or translations that are finished but not filled into the ITLB.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks due to an instruction fetch that miss the PDE (Page Directory Entry) cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.PDE_CACHE_MISS",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts the number of first level TLB misses but second level hits due to an instruction fetch that did not start a page walk. Account for all pages sizes. Will results in a DTLB write from STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.STLB_HIT",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to instruction fetch misses to a 2M or 4M page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to instruction fetches whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 2M or 4M pages.  Includes page walks that page fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks completed due to instruction fetch misses to a 4K page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks completed due to instruction fetches whose address translations missed in all Translation Lookaside Buffer (TLB) levels and were mapped to 4K pages.  Includes page walks that page fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for instruction fetches every cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_PENDING",
+        "PDIR_COUNTER": "na",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding in the page miss handler (PMH) for instruction fetches every cycle.  A page walk is outstanding from start till PMH becomes idle again (ready to serve next walk).",
+        "SampleAfterValue": "200003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts the number of memory retired ops that missed in the second level TLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.DTLB_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x13"
+    },
+    {
+        "BriefDescription": "Counts the number of load ops retired that miss in the second Level TLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x11"
+    },
+    {
+        "BriefDescription": "Counts the number of store ops retired that miss in the second level TLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_UOPS_RETIRED.DTLB_MISS_STORES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x12"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json b/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json
new file mode 100644
index 000000000000..57ddbb9f9b31
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/icelakex/icx-metrics.json
@@ -0,0 +1,315 @@
+[
+    {
+        "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Summary",
+        "MetricName": "IPC"
+    },
+    {
+        "BriefDescription": "Uops Per Instruction",
+        "MetricExpr": "UOPS_RETIRED.SLOTS / INST_RETIRED.ANY",
+        "MetricGroup": "Pipeline;Retire",
+        "MetricName": "UPI"
+    },
+    {
+        "BriefDescription": "Instruction per taken branch",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
+        "MetricGroup": "Branches;FetchBW;PGO",
+        "MetricName": "IpTB"
+    },
+    {
+        "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
+        "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
+        "MetricGroup": "Pipeline",
+        "MetricName": "CPI"
+    },
+    {
+        "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Pipeline",
+        "MetricName": "CLKS"
+    },
+    {
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "Flops",
+        "MetricName": "FLOPc"
+    },
+    {
+        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
+        "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)",
+        "MetricGroup": "Pipeline;PortsUtil",
+        "MetricName": "ILP"
+    },
+    {
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "BrMispredicts",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
+        "MetricExpr": "CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "SMT",
+        "MetricName": "CORE_CLKS"
+    },
+    {
+        "BriefDescription": "Instructions per Load (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS",
+        "MetricGroup": "InsType",
+        "MetricName": "IpLoad"
+    },
+    {
+        "BriefDescription": "Instructions per Store (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES",
+        "MetricGroup": "InsType",
+        "MetricName": "IpStore"
+    },
+    {
+        "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "Branches;InsType",
+        "MetricName": "IpBranch"
+    },
+    {
+        "BriefDescription": "Instructions per (near) call (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL",
+        "MetricGroup": "Branches",
+        "MetricName": "IpCall"
+    },
+    {
+        "BriefDescription": "Branch instructions per taken branch. ",
+        "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN",
+        "MetricGroup": "Branches;PGO",
+        "MetricName": "BpTkBranch"
+    },
+    {
+        "BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
+        "MetricGroup": "Flops;FpArith;InsType",
+        "MetricName": "IpFLOP"
+    },
+    {
+        "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
+        "MetricExpr": "INST_RETIRED.ANY",
+        "MetricGroup": "Summary;TmaL1",
+        "MetricName": "Instructions"
+    },
+    {
+        "BriefDescription": "Fraction of Uops delivered by the LSD (Loop Stream Detector; aka Loop Cache)",
+        "MetricExpr": "LSD.UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
+        "MetricGroup": "LSD",
+        "MetricName": "LSD_Coverage"
+    },
+    {
+        "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
+        "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
+        "MetricGroup": "DSB;FetchBW",
+        "MetricName": "DSB_Coverage"
+    },
+    {
+        "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
+        "MetricGroup": "MemoryBound;MemoryLat",
+        "MetricName": "Load_Miss_Real_Latency"
+    },
+    {
+        "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
+        "MetricGroup": "MemoryBound;MemoryBW",
+        "MetricName": "MLP"
+    },
+    {
+        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+        "MetricConstraint": "NO_NMI_WATCHDOG",
+        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING ) / ( 2 * CPU_CLK_UNHALTED.DISTRIBUTED )",
+        "MetricGroup": "MemoryTLB",
+        "MetricName": "Page_Walks_Utilization"
+    },
+    {
+        "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
+        "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW",
+        "MetricName": "L1D_Cache_Fill_BW"
+    },
+    {
+        "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
+        "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW",
+        "MetricName": "L2_Cache_Fill_BW"
+    },
+    {
+        "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
+        "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW",
+        "MetricName": "L3_Cache_Fill_BW"
+    },
+    {
+        "BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
+        "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW;Offcore",
+        "MetricName": "L3_Cache_Access_BW"
+    },
+    {
+        "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L1MPKI"
+    },
+    {
+        "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L2MPKI"
+    },
+    {
+        "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
+        "MetricExpr": "1000 * ( ( OFFCORE_REQUESTS.ALL_DATA_RD - OFFCORE_REQUESTS.DEMAND_DATA_RD ) + L2_RQSTS.ALL_DEMAND_MISS + L2_RQSTS.SWPF_MISS ) / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses;Offcore",
+        "MetricName": "L2MPKI_All"
+    },
+    {
+        "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L3MPKI"
+    },
+    {
+        "BriefDescription": "Rate of silent evictions from the L2 cache per Kilo instruction where the evicted lines are dropped (no writeback to L3 or memory)",
+        "MetricExpr": "1000 * L2_LINES_OUT.SILENT / INST_RETIRED.ANY",
+        "MetricGroup": "L2Evicts;Server",
+        "MetricName": "L2_Evictions_Silent_PKI"
+    },
+    {
+        "BriefDescription": "Rate of non silent evictions from the L2 cache per Kilo instruction",
+        "MetricExpr": "1000 * L2_LINES_OUT.NON_SILENT / INST_RETIRED.ANY",
+        "MetricGroup": "L2Evicts;Server",
+        "MetricName": "L2_Evictions_NonSilent_PKI"
+    },
+    {
+        "BriefDescription": "Average CPU Utilization",
+        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
+        "MetricGroup": "HPC;Summary",
+        "MetricName": "CPU_Utilization"
+    },
+    {
+        "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
+        "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time",
+        "MetricGroup": "Summary;Power",
+        "MetricName": "Average_Frequency"
+    },
+    {
+        "BriefDescription": "Giga Floating Point Operations Per Second",
+        "MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
+        "MetricGroup": "Flops;HPC",
+        "MetricName": "GFLOPs"
+    },
+    {
+        "BriefDescription": "Average Frequency Utilization relative nominal frequency",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricGroup": "Power",
+        "MetricName": "Turbo_Utilization"
+    },
+    {
+        "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
+        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_DISTRIBUTED if #SMT_on else 0",
+        "MetricGroup": "SMT",
+        "MetricName": "SMT_2T_Utilization"
+    },
+    {
+        "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "OS",
+        "MetricName": "Kernel_Utilization"
+    },
+    {
+        "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
+        "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
+        "MetricGroup": "HPC;MemoryBW;SoC",
+        "MetricName": "DRAM_BW_Use"
+    },
+    {
+        "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
+        "MetricExpr": "1000000000 * ( UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD / UNC_CHA_TOR_INSERTS.IA_MISS_DRD ) / ( cha_0@event\\=0x0@ / duration_time )",
+        "MetricGroup": "MemoryLat;SoC",
+        "MetricName": "MEM_Read_Latency"
+    },
+    {
+        "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
+        "MetricExpr": "UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD / cha@event\\=0x36\\,umask\\=0xC817FE01\\,thresh\\=1@",
+        "MetricGroup": "MemoryBW;SoC",
+        "MetricName": "MEM_Parallel_Reads"
+    },
+    {
+        "BriefDescription": "Average latency of data read request to external 3D X-Point memory [in nanoseconds]. Accounts for demand loads and L1/L2 data-read prefetches",
+        "MetricExpr": "( 1000000000 * ( UNC_CHA_TOR_OCCUPANCY.IA_MISS_DRD_PMM / UNC_CHA_TOR_INSERTS.IA_MISS_DRD_PMM ) / cha_0@event\\=0x0@ )",
+        "MetricGroup": "MemoryLat;SoC;Server",
+        "MetricName": "MEM_PMM_Read_Latency"
+    },
+    {
+        "BriefDescription": "Average 3DXP Memory Bandwidth Use for reads [GB / sec]",
+        "MetricExpr": "( ( 64 * imc@event\\=0xe3@ / 1000000000 ) / duration_time )",
+        "MetricGroup": "MemoryBW;SoC;Server",
+        "MetricName": "PMM_Read_BW"
+    },
+    {
+        "BriefDescription": "Average 3DXP Memory Bandwidth Use for Writes [GB / sec]",
+        "MetricExpr": "( ( 64 * imc@event\\=0xe7@ / 1000000000 ) / duration_time )",
+        "MetricGroup": "MemoryBW;SoC;Server",
+        "MetricName": "PMM_Write_BW"
+    },
+    {
+        "BriefDescription": "Average IO (network or disk) Bandwidth Use for Writes [GB / sec]",
+        "MetricExpr": "UNC_CHA_TOR_INSERTS.IO_PCIRDCUR * 64 / 1000000000 / duration_time",
+        "MetricGroup": "IoBW;SoC;Server",
+        "MetricName": "IO_Write_BW"
+    },
+    {
+        "BriefDescription": "Average IO (network or disk) Bandwidth Use for Reads [GB / sec]",
+        "MetricExpr": "( UNC_CHA_TOR_INSERTS.IO_HIT_ITOM + UNC_CHA_TOR_INSERTS.IO_MISS_ITOM + UNC_CHA_TOR_INSERTS.IO_HIT_ITOMCACHENEAR + UNC_CHA_TOR_INSERTS.IO_MISS_ITOMCACHENEAR ) * 64 / 1000000000 / duration_time",
+        "MetricGroup": "IoBW;SoC;Server",
+        "MetricName": "IO_Read_BW"
+    },
+    {
+        "BriefDescription": "Socket actual clocks when any core is active on that socket",
+        "MetricExpr": "cha_0@event\\=0x0@",
+        "MetricGroup": "SoC",
+        "MetricName": "Socket_CLKS"
+    },
+    {
+        "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u",
+        "MetricGroup": "Branches;OS",
+        "MetricName": "IpFarBranch"
+    },
+    {
+        "BriefDescription": "C1 residency percent per core",
+        "MetricExpr": "(cstate_core@c1\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C1_Core_Residency"
+    },
+    {
+        "BriefDescription": "C6 residency percent per core",
+        "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C6_Core_Residency"
+    },
+    {
+        "BriefDescription": "C2 residency percent per package",
+        "MetricExpr": "(cstate_pkg@c2\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C2_Pkg_Residency"
+    },
+    {
+        "BriefDescription": "C6 residency percent per package",
+        "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C6_Pkg_Residency"
+    },
+]
diff --git a/tools/perf/pmu-events/arch/x86/mapfile.csv b/tools/perf/pmu-events/arch/x86/mapfile.csv
index 5f5df6560202..0cf2d1fa6b76 100644
--- a/tools/perf/pmu-events/arch/x86/mapfile.csv
+++ b/tools/perf/pmu-events/arch/x86/mapfile.csv
@@ -36,11 +36,12 @@ GenuineIntel-6-55-[01234],v1,skylakex,core
 GenuineIntel-6-55-[56789ABCDEF],v1,cascadelakex,core
 GenuineIntel-6-7D,v1,icelake,core
 GenuineIntel-6-7E,v1,icelake,core
-GenuineIntel-6-8[CD],v1,icelake,core
+GenuineIntel-6-8[CD],v1,tigerlake,core
 GenuineIntel-6-A7,v1,icelake,core
 GenuineIntel-6-6A,v1,icelakex,core
 GenuineIntel-6-6C,v1,icelakex,core
 GenuineIntel-6-86,v1,tremontx,core
+GenuineIntel-6-96,v1,elkhartlake,core
 AuthenticAMD-23-([12][0-9A-F]|[0-9A-F]),v2,amdzen1,core
 AuthenticAMD-23-[[:xdigit:]]+,v1,amdzen2,core
 AuthenticAMD-25-[[:xdigit:]]+,v1,amdzen3,core
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/cache.json b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
index e750a21976f1..9ff67206ade4 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/cache.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/cache.json
@@ -1,49 +1,123 @@
 [
     {
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "L1D data line replacements",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0004",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x51",
+        "EventName": "L1D.REPLACEMENT",
+        "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
+        "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
-        "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.FB_FULL",
+        "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts all demand code reads that have any response type.",
+        "BriefDescription": "L1D miss outstandings duration in cycles",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010004",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING",
+        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with L1D load Misses outstanding.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
+        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "AnyThread": "1",
+        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "L2 cache lines filling L2",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF1",
+        "EventName": "L2_LINES_IN.ALL",
+        "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
         "SampleAfterValue": "100003",
+        "UMask": "0x1f"
+    },
+    {
+        "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.NON_SILENT",
+        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.SILENT",
+        "SampleAfterValue": "200003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache",
+        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.USELESS_HWPF",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Deprecated": "1",
+        "EventCode": "0xF2",
+        "EventName": "L2_LINES_OUT.USELESS_PREF",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "L2 code requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x24",
-        "EventName": "L2_RQSTS.PF_MISS",
-        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
+        "EventName": "L2_RQSTS.ALL_CODE_RD",
+        "PublicDescription": "Counts the total number of L2 code requests.",
         "SampleAfterValue": "200003",
-        "UMask": "0x38"
+        "UMask": "0xe4"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
+        "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe1"
     },
     {
         "BriefDescription": "Demand requests that miss L2 cache",
@@ -56,157 +130,144 @@
         "UMask": "0x27"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Demand requests to L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0002",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
+        "PublicDescription": "Demand requests to L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe7"
     },
     {
-        "BriefDescription": "Retired load instructions with L3 cache hits as data sources",
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L3_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.",
-        "SampleAfterValue": "50021",
-        "UMask": "0x4"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_PF",
+        "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xf8"
     },
     {
-        "BriefDescription": "L2 writebacks that access L2 cache",
+        "BriefDescription": "RFO requests to L2 cache",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF0",
-        "EventName": "L2_TRANS.L2_WB",
-        "PublicDescription": "Counts L2 writebacks that access L2 cache.",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_RFO",
+        "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
         "SampleAfterValue": "200003",
-        "UMask": "0x40"
+        "UMask": "0xe2"
     },
     {
-        "BriefDescription": "L2 cache lines filling L2",
+        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF1",
-        "EventName": "L2_LINES_IN.ALL",
-        "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1f"
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_HIT",
+        "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "L2 cache misses when fetching instructions",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0400",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_MISS",
+        "PublicDescription": "Counts L2 cache misses when fetching instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x24"
     },
     {
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Demand Data Read requests that hit L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0001",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
+        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.",
+        "BriefDescription": "Demand Data Read miss L2, no rejects",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0100",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
+        "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x21"
     },
     {
-        "BriefDescription": "Demand Data Read requests sent to uncore",
+        "BriefDescription": "All requests that miss L2 cache",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
-        "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.MISS",
+        "PublicDescription": "All requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x3f"
     },
     {
-        "BriefDescription": "Retired load instructions missed L3 cache as data sources",
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L3_MISS",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x20"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.PF_HIT",
+        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xd8"
     },
     {
-        "BriefDescription": "All retired store instructions.",
+        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.ALL_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x82"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.PF_MISS",
+        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x38"
     },
     {
-        "BriefDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared state. A non-threaded event.",
+        "BriefDescription": "All L2 requests",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.SILENT",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.REFERENCES",
+        "PublicDescription": "All L2 requests.",
         "SampleAfterValue": "200003",
-        "UMask": "0x1"
+        "UMask": "0xff"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3.",
+        "BriefDescription": "RFO requests that hit L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0490",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_HIT",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc2"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "RFO requests that miss L2 cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0490",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_MISS",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x22"
+    },
+    {
+        "BriefDescription": "L2 writebacks that access L2 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF0",
+        "EventName": "L2_TRANS.L2_WB",
+        "PublicDescription": "Counts L2 writebacks that access L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
     },
     {
         "BriefDescription": "Core-originated cacheable demand requests missed L3",
@@ -220,223 +281,225 @@
         "UMask": "0x41"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches",
+        "BriefDescription": "Core-originated cacheable demand requests that refer to L3",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_PF",
-        "PublicDescription": "Counts the total number of requests from the L2 hardware prefetchers.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xf8"
+        "Errata": "SKL057",
+        "EventCode": "0x2E",
+        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
+        "PublicDescription": "Counts core-originated cacheable requests to the  L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4f"
     },
     {
-        "BriefDescription": "Retired load instructions whose data sources was remote HITM",
+        "BriefDescription": "All retired load instructions.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.ALL_LOADS",
         "PEBS": "1",
-        "PublicDescription": "Retired load instructions whose data sources was remote HITM.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x4"
+        "SampleAfterValue": "2000003",
+        "UMask": "0x81"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that have any response type.",
+        "BriefDescription": "All retired store instructions.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010490",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.ALL_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x82"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Retired load instructions with locked access.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0122",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "UMask": "0x21"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0100",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0x41"
     },
     {
-        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
+        "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
-        "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x42"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Retired load instructions that miss the STLB.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
+        "PEBS": "1",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0x11"
     },
     {
-        "BriefDescription": "RFO requests that miss L2 cache",
+        "BriefDescription": "Retired store instructions that miss the STLB.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.RFO_MISS",
-        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x22"
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "SampleAfterValue": "100003",
+        "UMask": "0x12"
     },
     {
-        "BriefDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped",
+        "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.NON_SILENT",
-        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines can be either in modified state or clean state. Modified lines may either be written back to L3 or directly written to memory and not allocated in L3.  Clean lines may either be allocated in L3 or dropped.",
-        "SampleAfterValue": "200003",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
+        "SampleAfterValue": "20011",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts the number of lines that have been hardware prefetched but not used and now evicted by L2 cache",
+        "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.USELESS_HWPF",
-        "SampleAfterValue": "200003",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were HitM responses from shared L3.",
+        "SampleAfterValue": "20011",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.",
+        "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010002",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
+        "PEBS": "1",
+        "SampleAfterValue": "20011",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All requests that miss L2 cache",
+        "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.MISS",
-        "PublicDescription": "All requests that miss L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x3f"
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources were hits in L3 without snoops required.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "L2 code requests",
+        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_CODE_RD",
-        "PublicDescription": "Counts the total number of L2 code requests.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe4"
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache",
+        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Data_LA": "1",
         "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM",
         "PEBS": "1",
-        "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.",
         "SampleAfterValue": "100007",
-        "UMask": "0x8"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Retired load instructions whose data sources was forwarded from a remote cache",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0020",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_FWD",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions whose data sources was forwarded from a remote cache.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that have any response type.",
+        "BriefDescription": "Retired load instructions whose data sources was remote HITM",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Data_LA": "1",
+        "EventCode": "0xD3",
+        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_HITM",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions whose data sources was remote HITM.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache",
+        "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HIT",
+        "EventCode": "0xD4",
+        "EventName": "MEM_LOAD_MISC_RETIRED.UC",
         "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were L3 and cross-core snoop hits in on-pkg core cache.",
-        "SampleAfterValue": "20011",
-        "UMask": "0x2"
+        "SampleAfterValue": "100007",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from remote dram",
+        "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.REMOTE_DRAM",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.FB_HIT",
         "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
         "SampleAfterValue": "100007",
-        "UMask": "0x2"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0122",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L1_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
@@ -452,104 +515,135 @@
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0020",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L2_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions with L2 cache hits as data sources.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Retired load instructions missed L2 cache as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0400",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L2_MISS",
+        "PEBS": "1",
+        "PublicDescription": "Retired load instructions missed L2 cache as data sources.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "L2 cache misses when fetching instructions",
+        "BriefDescription": "Retired load instructions with L3 cache hits as data sources",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.CODE_RD_MISS",
-        "PublicDescription": "Counts L2 cache misses when fetching instructions.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x24"
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L3_HIT",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Retired load instructions missed L3 cache as data sources",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0490",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xD1",
+        "EventName": "MEM_LOAD_RETIRED.L3_MISS",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Demand and prefetch data reads",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
+        "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
+        "BriefDescription": "Any memory transaction that reached the SQ.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
+        "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
     },
     {
-        "BriefDescription": "Counts demand data reads that hit in the L3.",
+        "BriefDescription": "Cacheable and noncachaeble code read requests",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0001",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
+        "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
         "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Demand Data Read requests sent to uncore",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0120",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
+        "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0120",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
+        "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
         "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB2",
+        "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL",
+        "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
+        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
         "BriefDescription": "Cycles with offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -561,212 +655,257 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Demand requests to L2 cache",
+        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_DEMAND_REFERENCES",
-        "PublicDescription": "Demand requests to L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe7"
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
+        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.",
+        "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
+        "PublicDescription": "Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Offcore outstanding Demand Data Read transactions in uncore queue.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
+        "PublicDescription": "Counts the number of offcore outstanding Demand Data Read transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor. See the corresponding Umask under OFFCORE_REQUESTS.Note: A prefetch promoted to Demand is counted from the promotion point.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "6",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore, every cycle",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
+        "PublicDescription": "Counts the number of offcore outstanding RFO (store) transactions in the super queue (SQ) every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0080",
-        "Offcore": "1",
+        "EventName": "OFFCORE_RESPONSE",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts all demand & prefetch data reads that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0491",
+        "MSRValue": "0x0000010491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.",
+        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010020",
+        "MSRValue": "0x3F803C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.",
+        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0122",
+        "MSRValue": "0x10003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0001",
+        "MSRValue": "0x04003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0080",
+        "MSRValue": "0x01003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Cycles with L1D load Misses outstanding from any thread on physical core.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES_ANY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0490",
+        "MSRValue": "0x08003C0491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core-originated cacheable demand requests that refer to L3",
+        "BriefDescription": "Counts all prefetch data reads that have any response type.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL057",
-        "EventCode": "0x2E",
-        "EventName": "LONGEST_LAT_CACHE.REFERENCE",
-        "PublicDescription": "Counts core-originated cacheable requests to the  L3 cache (Longest Latency cache). Requests include data and code reads, Reads-for-Ownership (RFOs), speculative accesses and hardware prefetches from L1 and L2.  It does not include all accesses to the L3.",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0000010490",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x4f"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.",
+        "BriefDescription": "Counts all prefetch data reads that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010080",
+        "MSRValue": "0x3F803C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0120",
+        "MSRValue": "0x10003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3.",
+        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0491",
+        "MSRValue": "0x04003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions that miss the STLB.",
+        "BriefDescription": "Counts all prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
-        "PEBS": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x01003C0490",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x11"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that have any response type.",
+        "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010001",
+        "MSRValue": "0x08003C0490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.",
+        "BriefDescription": "Counts prefetch RFOs that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0020",
+        "MSRValue": "0x0000010120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L1D data line replacements",
+        "BriefDescription": "Counts prefetch RFOs that hit in the L3.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x51",
-        "EventName": "L1D.REPLACEMENT",
-        "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0120",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
@@ -783,47 +922,43 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions with at least 1 uncacheable load or lock.",
+        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD4",
-        "EventName": "MEM_LOAD_MISC_RETIRED.UC",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "UMask": "0x4"
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x04003C0120",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were load missed L1 but hit FB due to preceding miss to the same cache line with data not ready",
+        "BriefDescription": "Counts prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.FB_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "This event is deprecated. Refer to new event L2_LINES_OUT.USELESS_HWPF",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Deprecated": "1",
-        "EventCode": "0xF2",
-        "EventName": "L2_LINES_OUT.USELESS_PREF",
-        "SampleAfterValue": "200003",
-        "UMask": "0x4"
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x01003C0120",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache",
+        "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.PF_HIT",
-        "PublicDescription": "Counts requests from the L1/L2/L3 hardware prefetchers or Load software prefetches that hit L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xd8"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x08003C0120",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Counts all demand & prefetch RFOs that have any response type.",
@@ -839,14 +974,17 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read miss L2, no rejects",
+        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.DEMAND_DATA_RD_MISS",
-        "PublicDescription": "Counts the number of demand Data Read requests that miss L2 cache. Only not rejected loads are counted.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x21"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0122",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
@@ -862,293 +1000,247 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010100",
+        "MSRValue": "0x04003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were hits in L3 without snoops required",
+        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were hits in L3 without snoops required.",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x01003C0122",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0080",
+        "MSRValue": "0x08003C0122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all demand code reads that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0491",
+        "MSRValue": "0x0000010004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "All retired load instructions.",
+        "BriefDescription": "Counts all demand code reads that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.ALL_LOADS",
-        "PEBS": "1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x81"
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0004",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions which data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
+        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
-        "PEBS": "1",
-        "SampleAfterValue": "20011",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10003C0004",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_DEMAND_DATA_RD",
-        "PublicDescription": "Counts the number of demand Data Read requests (including requests from L1D hardware prefetchers). These loads may hit or miss L2 cache. Only non rejected loads are counted.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe1"
-    },
-    {
-        "BriefDescription": "All L2 requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.REFERENCES",
-        "PublicDescription": "All L2 requests.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xff"
-    },
-    {
-        "BriefDescription": "Cycles with L1D load Misses outstanding.",
+        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
-        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x04003C0004",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
-        "PublicDescription": "Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all demand code reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0100",
+        "MSRValue": "0x01003C0004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of cache line split locks sent to uncore.",
+        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xF4",
-        "EventName": "SQ_MISC.SPLIT_LOCK",
-        "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x08003C0004",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x10"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.",
+        "BriefDescription": "Counts demand data reads that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0002",
+        "MSRValue": "0x0000010001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts demand data reads that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0100",
+        "MSRValue": "0x3F803C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.CODE_RD_HIT",
-        "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc4"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.",
+        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0400",
+        "MSRValue": "0x10003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.",
+        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010010",
+        "MSRValue": "0x04003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
+        "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L2_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions with L2 cache hits as data sources.",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x01003C0001",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "RFO requests that hit L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.RFO_HIT",
-        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0080",
+        "MSRValue": "0x08003C0001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "L1D miss outstandings duration in cycles",
+        "BriefDescription": "Counts all demand data writes (RFOs) that have any response type.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.PENDING",
-        "PublicDescription": "Counts duration of L1D miss outstanding, that is each cycle number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch.Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0000010002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0491",
+        "MSRValue": "0x3F803C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests that hit L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.DEMAND_DATA_RD_HIT",
-        "PublicDescription": "Counts the number of demand Data Read requests, initiated by load instructions, that hit L2 cache",
-        "SampleAfterValue": "200003",
-        "UMask": "0xc1"
-    },
-    {
-        "BriefDescription": "Retired load instructions which data sources were HitM responses from shared L3",
+        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD2",
-        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_HITM",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources were HitM responses from shared L3.",
-        "SampleAfterValue": "20011",
-        "UMask": "0x4"
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10003C0002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0001",
+        "MSRValue": "0x04003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -1168,508 +1260,416 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0080",
+        "MSRValue": "0x08003C0002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0010",
+        "MSRValue": "0x0000010400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0400",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x42"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0010",
+        "MSRValue": "0x10003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Any memory transaction that reached the SQ.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
-        "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
-        "SampleAfterValue": "100003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "Cacheable and noncachaeble code read requests",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.DEMAND_CODE_RD",
-        "PublicDescription": "Counts both cacheable and non-cacheable code read requests.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0100",
+        "MSRValue": "0x04003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0004",
+        "MSRValue": "0x01003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
-        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that have any response type.",
+        "BriefDescription": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010400",
+        "MSRValue": "0x08003C0400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0004",
+        "MSRValue": "0x0000010010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0004",
+        "MSRValue": "0x3F803C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a request needed a FB entry but there was no entry available for it. That is the FB unavailability was dominant reason for blocking the request. A request includes cacheable/uncacheable demands that is load, store or SW prefetch.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x48",
-        "EventName": "L1D_PEND_MISS.FB_FULL",
-        "PublicDescription": "Number of times a request needed a FB (Fill Buffer) entry but there was no entry available for it. A request includes cacheable/uncacheable demands that are load, store or SW prefetch instructions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0020",
+        "MSRValue": "0x10003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that hit in the L3.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0004",
+        "MSRValue": "0x04003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that hit in the L3.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0120",
+        "MSRValue": "0x01003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0020",
+        "MSRValue": "0x08003C0010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.ANY_RESPONSE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0400",
+        "MSRValue": "0x0000010020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L1_HIT",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0020",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
-        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0490",
+        "MSRValue": "0x10003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions with locked access.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "UMask": "0x21"
-    },
-    {
-        "BriefDescription": "Demand and prefetch data reads",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
-        "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x04003C0020",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Retired load instructions which data sources missed L3 but serviced from local dram",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD3",
-        "EventName": "MEM_LOAD_L3_MISS_RETIRED.LOCAL_DRAM",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions which data sources missed L3 but serviced from local DRAM.",
-        "SampleAfterValue": "100007",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.NO_SNOOP_NEEDED",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x01003C0020",
+        "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0400",
+        "MSRValue": "0x08003C0020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0000010080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x41"
-    },
-    {
-        "BriefDescription": "Offcore requests buffer cannot take more entries for this thread core.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB2",
-        "EventName": "OFFCORE_REQUESTS_BUFFER.SQ_FULL",
-        "PublicDescription": "Counts the number of cases when the offcore requests buffer cannot take more entries for the core. This can happen when the superqueue does not contain eligible entries, or when L1D writeback pending FIFO requests is full.Note: Writeback pending FIFO has six entries.",
-        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "6",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3F803C0080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding Code Reads transactions in the SuperQueue (SQ), queue to uncore, every cycle.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_CODE_RD",
-        "PublicDescription": "Counts the number of offcore outstanding Code Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0002",
+        "MSRValue": "0x10003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3F803C0010",
+        "MSRValue": "0x04003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that have any response type.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.ANY_RESPONSE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0000010120",
+        "MSRValue": "0x01003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_HIT.HITM_OTHER_CORE",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x10003C0002",
+        "MSRValue": "0x08003C0080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired store instructions that miss the STLB.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that have any response type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD0",
-        "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
-        "L1_Hit_Indication": "1",
-        "PEBS": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0000010100",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x12"
-    },
-    {
-        "BriefDescription": "RFO requests to L2 cache",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x24",
-        "EventName": "L2_RQSTS.ALL_RFO",
-        "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
-        "SampleAfterValue": "200003",
-        "UMask": "0xe2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x08003C0010",
+        "MSRValue": "0x3F803C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HITM_OTHER_CORE",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0010",
+        "MSRValue": "0x10003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired load instructions missed L2 cache as data sources",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xD1",
-        "EventName": "MEM_LOAD_RETIRED.L2_MISS",
-        "PEBS": "1",
-        "PublicDescription": "Retired load instructions missed L2 cache as data sources.",
-        "SampleAfterValue": "50021",
-        "UMask": "0x10"
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x04003C0100",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that hit in the L3 and sibling core snoops are not needed as either the core-valid bit is not set or the shared line is present in multiple cores.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_HIT.NO_SNOOP_NEEDED",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.NO_SNOOP_NEEDED",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x01003C0001",
+        "MSRValue": "0x01003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
-        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts all demand & prefetch RFOs that hit in the L3 and the snoop to one of the sibling cores hits the line in M state and the line is forwarded.",
+        "BriefDescription": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_HIT.HIT_OTHER_CORE_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_HIT.SNOOP_HIT_WITH_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x04003C0122",
+        "MSRValue": "0x08003C0100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of cache line split locks sent to uncore.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xF4",
+        "EventName": "SQ_MISC.SPLIT_LOCK",
+        "PublicDescription": "Counts the number of cache line split locks sent to the uncore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
index e197cde15047..503737ed3a83 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/floating-point.json
@@ -9,22 +9,13 @@
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 8 calculations per element.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x8"
     },
     {
         "BriefDescription": "Number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
@@ -36,33 +27,31 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 16 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
+        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x80"
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 8 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Cycles with any input/output SSE or FP assist",
+        "BriefDescription": "Number of SSE/AVX computational 512-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 16 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xCA",
-        "EventName": "FP_ASSIST.ANY",
-        "PublicDescription": "Counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1e"
+        "EventCode": "0xC7",
+        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
     },
     {
         "BriefDescription": "Number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
@@ -74,12 +63,23 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "BriefDescription": "Number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0xC7",
-        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles with any input/output SSE or FP assist",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xCA",
+        "EventName": "FP_ASSIST.ANY",
+        "PublicDescription": "Counts cycles with any input and output SSE or x87 FP assist. If an input and output assist are detected on the same cycle the event increments by 1.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1e"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
index cdf95bd2a73d..078706a50091 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/frontend.json
@@ -1,13 +1,47 @@
 [
     {
-        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.",
+        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x80",
-        "EventName": "ICACHE_16B.IFDATA_STALL",
-        "PublicDescription": "Cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity.",
+        "EventCode": "0xE6",
+        "EventName": "BACLEARS.ANY",
+        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.COUNT",
+        "PublicDescription": "This event counts the number of the Decode Stream Buffer (DSB)-to-MITE switches including all misses because of missing Decode Stream Buffer (DSB) cache and u-arch forced misses.\nNote: Invoking MITE requires two or three cycles delay.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xAB",
+        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
+        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.DSB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x11",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
@@ -24,220 +58,246 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
+        "EventName": "FRONTEND_RETIRED.L1I_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x408006",
+        "MSRValue": "0x12",
         "PEBS": "1",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
+        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
-        "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.L2_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x13",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.DSB_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
-        "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400106",
+        "PEBS": "2",
+        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xE6",
-        "EventName": "BACLEARS.ANY",
-        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x408006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced decode stream buffer (DSB - the decoded instruction-cache) miss.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.DSB_MISS",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x11",
+        "MSRValue": "0x401006",
         "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
-        "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x401006",
+        "MSRValue": "0x410006",
         "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MITE_UOPS",
-        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x100206",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
-        "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x200206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x30"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x300206",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles MITE is delivering any Uop",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS",
-        "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x24"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x402006",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x83",
-        "EventName": "ICACHE_64B.IFTAG_HIT",
-        "SampleAfterValue": "200003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400406",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_SWITCHES",
-        "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x30"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x420006",
+        "PEBS": "1",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.L2_MISS",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_64",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x13",
+        "MSRValue": "0x404006",
         "PEBS": "1",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MITE_CYCLES",
-        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x400806",
+        "PEBS": "1",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_64",
+        "EventName": "FRONTEND_RETIRED.STLB_MISS",
         "MSRIndex": "0x3F7",
-        "MSRValue": "0x404006",
+        "MSRValue": "0x15",
         "PEBS": "1",
+        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
         "SampleAfterValue": "100007",
         "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x9C",
-        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
-        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
+        "EventCode": "0x80",
+        "EventName": "ICACHE_16B.IFDATA_STALL",
+        "PublicDescription": "Cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity.",
         "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_HIT",
+        "SampleAfterValue": "200003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x79",
-        "EventName": "IDQ.MS_MITE_UOPS",
-        "PublicDescription": "Counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_MISS",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
     },
     {
         "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
@@ -249,14 +309,15 @@
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles.",
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAB",
-        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
-        "PublicDescription": "Counts Decode Stream Buffer (DSB)-to-MITE switch true penalty cycles. These cycles do not include uops routed through because of the switch itself, for example, when Instruction Decode Queue (IDQ) pre-allocation is unavailable, or Instruction Decode Queue (IDQ) is full. SBD-to-MITE switch true penalty cycles happen after the merge mux (MM) receives Decode Stream Buffer (DSB) Sync-indication until receiving the first MITE uop. MM is placed before Instruction Decode Queue (IDQ) to merge uops being fed from the MITE and Decode Stream Buffer (DSB) paths. Decode Stream Buffer (DSB) inserts the Sync-indication whenever a Decode Stream Buffer (DSB)-to-MITE switch occurs.Penalty: A Decode Stream Buffer (DSB) hit followed by a Decode Stream Buffer (DSB) miss can cost up to six cycles in which no uops are delivered to the IDQ. Most often, such switches from the Decode Stream Buffer (DSB) to the legacy pipeline cost 02 cycles.",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x18"
     },
     {
         "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
@@ -270,106 +331,79 @@
         "UMask": "0x18"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
+        "BriefDescription": "Cycles MITE is delivering 4 Uops",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.STLB_MISS",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x15",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0x79",
+        "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
+        "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x24"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
+        "BriefDescription": "Cycles MITE is delivering any Uop",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
         "EventCode": "0x79",
-        "EventName": "IDQ.DSB_UOPS",
-        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "EventName": "IDQ.ALL_MITE_CYCLES_ANY_UOPS",
+        "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x24"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x420006",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x400806",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
-        "Counter": "0,1,2,3,4,5,6,7",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xc6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x400106",
-        "PEBS": "2",
-        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x400206",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x400406",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_UOPS",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. Counting includes uops that may 'bypass' the IDQ. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles MITE is delivering 4 Uops",
+        "BriefDescription": "Cycles when uops are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
+        "CounterMask": "1",
         "EventCode": "0x79",
-        "EventName": "IDQ.ALL_MITE_CYCLES_4_UOPS",
-        "PublicDescription": "Counts the number of cycles 4 uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. Counting includes uops that may 'bypass' the IDQ. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "EventName": "IDQ.MS_CYCLES",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x24"
+        "UMask": "0x30"
     },
     {
         "BriefDescription": "Cycles when uops initiated by Decode Stream Buffer (DSB) are being delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
@@ -383,101 +417,56 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
+        "BriefDescription": "Uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x79",
-        "EventName": "IDQ.MS_UOPS",
-        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
+        "EventName": "IDQ.MS_MITE_UOPS",
+        "PublicDescription": "Counts the number of uops initiated by MITE and delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Counting includes uops that may 'bypass' the IDQ.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x30"
-    },
-    {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x410006",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 2 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_2",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x200206",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 3 bubble-slots for a period of 2 cycles which was not interrupted by a back-end stall.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_3",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x300206",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x100206",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_SWITCHES",
+        "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
     },
     {
-        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering 4 Uops",
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) while Microcode Sequenser (MS) is busy",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
         "EventCode": "0x79",
-        "EventName": "IDQ.ALL_DSB_CYCLES_4_UOPS",
-        "PublicDescription": "Counts the number of cycles 4 uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path. Count includes uops that may 'bypass' the IDQ.",
+        "EventName": "IDQ.MS_UOPS",
+        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x18"
+        "UMask": "0x30"
     },
     {
-        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE switches",
+        "BriefDescription": "Uops not delivered to Resource Allocation Table (RAT) per thread when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAB",
-        "EventName": "DSB2MITE_SWITCHES.COUNT",
-        "PublicDescription": "This event counts the number of the Decode Stream Buffer (DSB)-to-MITE switches including all misses because of missing Decode Stream Buffer (DSB) cache and u-arch forced misses.\nNote: Invoking MITE requires two or three cycles delay.",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
+        "PublicDescription": "Counts the number of uops not delivered to Resource Allocation Table (RAT) per thread adding 4  x when Resource Allocation Table (RAT) is not stalled and Instruction Decode Queue (IDQ) delivers x uops to Resource Allocation Table (RAT) (where x belongs to {0,1,2,3}). Counting does not cover cases when: a. IDQ-Resource Allocation Table (RAT) pipe serves the other thread. b. Resource Allocation Table (RAT) is stalled for the thread (including uop drops and clear BE conditions).  c. Instruction Decode Queue (IDQ) delivers four uops.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
+        "BriefDescription": "Cycles per thread when 4 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x402006",
-        "PEBS": "1",
-        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when no uops are delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core =4.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
@@ -492,25 +481,36 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "BriefDescription": "Cycles per thread when 3 or more uops are not delivered to Resource Allocation Table (RAT) when backend of the machine is not stalled",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x83",
-        "EventName": "ICACHE_64B.IFTAG_MISS",
-        "SampleAfterValue": "200003",
-        "UMask": "0x2"
+        "CounterMask": "3",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_1_UOP_DELIV.CORE",
+        "PublicDescription": "Counts, on the per-thread basis, cycles when less than 1 uop is delivered to Resource Allocation Table (RAT). IDQ_Uops_Not_Delivered.core >= 3.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
+        "BriefDescription": "Cycles with less than 2 uops delivered by the front end.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC6",
-        "EventName": "FRONTEND_RETIRED.L1I_MISS",
-        "MSRIndex": "0x3F7",
-        "MSRValue": "0x12",
-        "PEBS": "1",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_2_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 2 uops delivered by the front-end.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with less than 3 uops delivered by the front end.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x9C",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_LE_3_UOP_DELIV.CORE",
+        "PublicDescription": "Cycles with less than 3 uops delivered by the front-end.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/memory.json b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
index 6c3fd89d204d..6f29b02fa320 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/memory.json
@@ -1,31 +1,262 @@
 [
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Cycles while L3 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800122",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L3_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "6",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED",
+        "PEBS": "1",
+        "PublicDescription": "Number of times HLE abort was triggered.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to unfriendly events (such as interrupts).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_EVENTS",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_MEM",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to incompatible memory type",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_MEMTYPE",
+        "PublicDescription": "Number of times an HLE execution aborted due to incompatible memory type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to hardware timer expiration.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_TIMER",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution successfully committed",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.COMMIT",
+        "PublicDescription": "Number of times HLE commit succeeded.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an HLE execution started.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC8",
+        "EventName": "HLE_RETIRED.START",
+        "PublicDescription": "Number of times we entered an HLE region. Does not count nested transactions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL089",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
+        "PublicDescription": "Counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from one of the following:a. memory disambiguation,b. external snoop, orc. cross SMT-HW-thread snoop (stores) hitting load buffer.",
         "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x80",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "1009",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3.",
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000122",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x10",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "20011",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x100",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "503",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x20",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x4",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.  Reported latency may be longer than just the memory latency.",
         "SampleAfterValue": "100003",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x200",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "101",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x40",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "2003",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x8",
+        "PEBS": "2",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "50021",
+        "TakenAlone": "1",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Demand Data Read requests who miss L3 cache",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xB0",
+        "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
+        "PublicDescription": "Demand Data Read requests who miss L3 cache.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts number of Offcore outstanding Demand Data Read requests that miss L3 cache in the superQ every cycle.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
         "BriefDescription": "Cycles with at least 6 Demand Data Read requests that miss L3 cache in the superQ.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -36,146 +267,130 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800020",
+        "MSRValue": "0x3FBC000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3.",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000100",
+        "MSRValue": "0x103FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00002",
+        "MSRValue": "0x083FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to hardware timer expiration.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_TIMER",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800490",
+        "MSRValue": "0x063FC00491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_MEM",
-        "PublicDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800004",
+        "MSRValue": "0x0604000491",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
+        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
-        "PublicDescription": "Number of times an RTM execution aborted due to incompatible memory type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x063B800491",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3.",
+        "BriefDescription": "Counts all prefetch data reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000002",
+        "MSRValue": "0x3FBC000490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00120",
+        "MSRValue": "0x103FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that miss in the L3.",
+        "BriefDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000490",
+        "MSRValue": "0x083FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000120",
+        "MSRValue": "0x063FC00490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -195,464 +410,312 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles while L3 cache miss demand load is outstanding.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L3_MISS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000491",
+        "MSRValue": "0x063B800490",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts prefetch RFOs that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00004",
+        "MSRValue": "0x3FBC000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00004",
+        "MSRValue": "0x103FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x20",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "100007",
-        "TakenAlone": "1",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00020",
+        "MSRValue": "0x083FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00490",
+        "MSRValue": "0x063FC00120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3.",
+        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000020",
+        "MSRValue": "0x0604000120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a HLE transactional region aborted due to a non XRELEASE prefixed instruction writing to an elided lock in the elision buffer",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_STORE_TO_ELIDED_LOCK",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to a non-release/commit store to lock.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_CONFLICT",
-        "PublicDescription": "Number of times a TSX line had a cache conflict.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3.",
+        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000400",
+        "MSRValue": "0x063B800120",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x40",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "2003",
-        "TakenAlone": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3FBC000122",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00002",
+        "MSRValue": "0x103FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to various memory events (e.g., read/write capacity and conflicts).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_MEM",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to NoAllocatedElisionBuffer being non-zero.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_NOT_EMPTY",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00080",
+        "MSRValue": "0x083FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC5",
-        "PublicDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts the number of times a XBEGIN instruction was executed inside an HLE transactional region.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC4",
-        "PublicDescription": "RTM region detected inside HLE.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Counts the number of times an instruction execution caused the transactional nest count supported to be exceeded",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC3",
-        "PublicDescription": "Unfriendly TSX abort triggered by a nest count that is too deep.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts the number of times a class of instructions (e.g., vzeroupper) that may cause a transactional abort was executed inside a transactional region",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC2",
-        "PublicDescription": "Unfriendly TSX abort triggered by a vzeroupper instruction.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5d",
-        "EventName": "TX_EXEC.MISC1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Number of times an RTM execution successfully committed",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.COMMIT",
-        "PublicDescription": "Number of times RTM commit succeeded.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts prefetch RFOs that miss in the L3.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000120",
+        "MSRValue": "0x063FC00122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts number of Offcore outstanding Demand Data Read requests that miss L3 cache in the superQ every cycle.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.L3_MISS_DEMAND_DATA_RD",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800491",
+        "MSRValue": "0x0604000122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800080",
+        "MSRValue": "0x063B800122",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand code reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00490",
+        "MSRValue": "0x3FBC000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000010",
+        "MSRValue": "0x103FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to uncommon conditions.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_TIMER",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all demand code reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00020",
+        "MSRValue": "0x083FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00002",
+        "MSRValue": "0x063FC00004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch data reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00490",
+        "MSRValue": "0x0604000004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800100",
+        "MSRValue": "0x063B800004",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts demand data reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00010",
+        "MSRValue": "0x3FBC000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00010",
+        "MSRValue": "0x103FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to HLE-unfriendly instructions and certain unfriendly events (such as AD assists etc.).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_UNFRIENDLY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800400",
+        "MSRValue": "0x083FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00122",
+        "MSRValue": "0x063FC00001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00122",
+        "MSRValue": "0x0604000001",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -672,541 +735,442 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000001",
+        "MSRValue": "0x3FBC000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution successfully committed",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.COMMIT",
-        "PublicDescription": "Number of times HLE commit succeeded.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Number of times HLE lock could not be elided due to ElisionBufferAvailable being zero.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.HLE_ELISION_BUFFER_FULL",
-        "PublicDescription": "Number of times we could not allocate Lock Buffer.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00100",
+        "MSRValue": "0x103FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00001",
+        "MSRValue": "0x083FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000020",
+        "MSRValue": "0x063FC00002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00080",
+        "MSRValue": "0x0604000002",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Demand Data Read requests who miss L3 cache",
+        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB0",
-        "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
-        "PublicDescription": "Demand Data Read requests who miss L3 cache.",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x063B800002",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x10"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00080",
+        "MSRValue": "0x3FBC000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that miss in the L3.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000001",
+        "MSRValue": "0x103FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
-        "PublicDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00010",
+        "MSRValue": "0x083FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00120",
+        "MSRValue": "0x063FC00400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00004",
+        "MSRValue": "0x0604000400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00100",
+        "MSRValue": "0x063B800400",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x100",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "503",
-        "TakenAlone": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x3FBC000010",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00122",
+        "MSRValue": "0x103FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00001",
+        "MSRValue": "0x083FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00020",
+        "MSRValue": "0x063FC00010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800002",
+        "MSRValue": "0x0604000010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00491",
+        "MSRValue": "0x063B800010",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.ABORTED",
-        "PEBS": "1",
-        "PublicDescription": "Number of times RTM abort was triggered.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00400",
+        "MSRValue": "0x3FBC000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to any reasons (multiple categories may count as one).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED",
-        "PEBS": "1",
-        "PublicDescription": "Number of times HLE abort was triggered.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x10",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "20011",
-        "TakenAlone": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HITM",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x103FC00020",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to an unsupported read alignment from the elision buffer.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_UNSUPPORTED_ALIGNMENT",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00400",
+        "MSRValue": "0x083FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800010",
+        "MSRValue": "0x063FC00020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with at least 1 Demand Data Read requests who miss L3 cache in the superQ.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x60",
-        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_L3_MISS_DEMAND_DATA_RD",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Counts all demand data writes (RFOs) that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000002",
+        "MSRValue": "0x0604000020",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
+        "BriefDescription": "Counts all prefetch (that bring data to L2) RFOs that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x200",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "101",
-        "TakenAlone": "1",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L2_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x063B800020",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS.REMOTE_HITM",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00400",
+        "MSRValue": "0x3FBC000080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts prefetch (that bring data to L2) data reads that miss in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L2_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000010",
+        "MSRValue": "0x103FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand code reads that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000004",
+        "MSRValue": "0x083FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times a transactional abort was signaled due to a data capacity limitation for transactional reads or writes.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_CAPACITY",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the data is returned from remote dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063B800120",
+        "MSRValue": "0x063FC00080",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to incompatible memory type",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_MEMTYPE",
-        "PublicDescription": "Number of times an HLE execution aborted due to incompatible memory type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Number of times an RTM execution started.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC9",
-        "EventName": "RTM_RETIRED.START",
-        "PublicDescription": "Number of times we entered an RTM region. Does not count nested transactions.",
-        "SampleAfterValue": "2000003",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x0604000080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts the number of machine clears due to memory order conflicts.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL089",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
-        "PublicDescription": "Counts the number of memory ordering Machine Clears detected. Memory Ordering Machine Clears can result from one of the following:a. memory disambiguation,b. external snoop, orc. cross SMT-HW-thread snoop (stores) hitting load buffer.",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x063B800080",
+        "Offcore": "1",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Number of times an HLE transactional execution aborted due to XRELEASE lock not satisfying the address and value requirements in the elision buffer",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x54",
-        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_MISMATCH",
-        "PublicDescription": "Number of times a TSX Abort was triggered due to release/commit but data and address mismatch.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss in the L3.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.ANY_SNOOP",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00491",
+        "MSRValue": "0x3FBC000100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the modified data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HITM",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000491",
+        "MSRValue": "0x103FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts demand data reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and clean or shared data is transferred from remote cache.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.REMOTE_HIT_FORWARD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00001",
+        "MSRValue": "0x083FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss in the L3.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS.ANY_SNOOP",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000080",
+        "MSRValue": "0x063FC00100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
@@ -1226,19 +1190,30 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) data reads that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from remote dram.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3",
         "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_DATA_RD.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
+        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS_REMOTE_DRAM.SNOOP_MISS_OR_NO_FWD",
         "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000080",
+        "MSRValue": "0x063B800100",
         "Offcore": "1",
         "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Number of times an RTM execution aborted due to any reasons (multiple categories may count as one).",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED",
+        "PEBS": "1",
+        "PublicDescription": "Number of times RTM abort was triggered.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
         "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -1249,155 +1224,180 @@
         "UMask": "0x80"
     },
     {
-        "BriefDescription": "Number of times an HLE execution started.",
+        "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.START",
-        "PublicDescription": "Number of times we entered an HLE region. Does not count nested transactions.",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_MEM",
+        "PublicDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts all demand code reads that miss in the L3.",
+        "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.DEMAND_CODE_RD.L3_MISS.ANY_SNOOP",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x3FBC000004",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
+        "PublicDescription": "Number of times an RTM execution aborted due to incompatible memory type.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
+        "BriefDescription": "Number of times an RTM execution aborted due to uncommon conditions.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x80",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "1009",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_TIMER",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch data reads that miss the L3 and clean or shared data is transferred from remote cache.",
+        "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_DATA_RD.L3_MISS.REMOTE_HIT_FORWARD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x083FC00491",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
+        "PublicDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Counts prefetch RFOs that miss the L3 and the modified data is transferred from remote cache.",
+        "BriefDescription": "Number of times an RTM execution successfully committed",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_PF_RFO.L3_MISS.REMOTE_HITM",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x103FC00120",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.COMMIT",
+        "PublicDescription": "Number of times RTM commit succeeded.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution started.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC9",
+        "EventName": "RTM_RETIRED.START",
+        "PublicDescription": "Number of times we entered an RTM region. Does not count nested transactions.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts all prefetch (that bring data to LLC only) RFOs that miss the L3 and the data is returned from local or remote dram.",
+        "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed. Since this is the count of execution, it may not always cause a transactional abort.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L3_RFO.L3_MISS.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x063FC00100",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC1",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
+        "BriefDescription": "Counts the number of times a class of instructions (e.g., vzeroupper) that may cause a transactional abort was executed inside a transactional region",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "6",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC2",
+        "PublicDescription": "Unfriendly TSX abort triggered by a vzeroupper instruction.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x6"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of times an HLE execution aborted due to unfriendly events (such as interrupts).",
+        "BriefDescription": "Counts the number of times an instruction execution caused the transactional nest count supported to be exceeded",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC8",
-        "EventName": "HLE_RETIRED.ABORTED_EVENTS",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC3",
+        "PublicDescription": "Unfriendly TSX abort triggered by a nest count that is too deep.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x80"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Counts all demand & prefetch RFOs that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Counts the number of times a XBEGIN instruction was executed inside an HLE transactional region.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.ALL_RFO.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000122",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC4",
+        "PublicDescription": "RTM region detected inside HLE.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
+        "BriefDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x4",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "100003",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC5",
+        "PublicDescription": "Counts the number of times an HLE XACQUIRE instruction was executed inside an RTM transactional region.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
+        "BriefDescription": "Number of times a transactional abort was signaled due to a data capacity limitation for transactional reads or writes.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Data_LA": "1",
-        "EventCode": "0xcd",
-        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
-        "MSRIndex": "0x3F6",
-        "MSRValue": "0x8",
-        "PEBS": "2",
-        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.  Reported latency may be longer than just the memory latency.",
-        "SampleAfterValue": "50021",
-        "TakenAlone": "1",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CAPACITY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts L1 data cache hardware prefetch requests and software prefetch requests that miss the L3 and the data is returned from local dram.",
+        "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xB7, 0xBB",
-        "EventName": "OFFCORE_RESPONSE.PF_L1D_AND_SW.L3_MISS_LOCAL_DRAM.SNOOP_MISS_OR_NO_FWD",
-        "MSRIndex": "0x1a6,0x1a7",
-        "MSRValue": "0x0604000400",
-        "Offcore": "1",
-        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
-        "SampleAfterValue": "100003",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CONFLICT",
+        "PublicDescription": "Number of times a TSX line had a cache conflict.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to XRELEASE lock not satisfying the address and value requirements in the elision buffer",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_MISMATCH",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to release/commit but data and address mismatch.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to NoAllocatedElisionBuffer being non-zero.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_NOT_EMPTY",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to commit but Lock Buffer not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an HLE transactional execution aborted due to an unsupported read alignment from the elision buffer.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_ELISION_BUFFER_UNSUPPORTED_ALIGNMENT",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to attempting an unsupported alignment from Lock Buffer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times a HLE transactional region aborted due to a non XRELEASE prefixed instruction writing to an elided lock in the elision buffer",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_HLE_STORE_TO_ELIDED_LOCK",
+        "PublicDescription": "Number of times a TSX Abort was triggered due to a non-release/commit store to lock.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times HLE lock could not be elided due to ElisionBufferAvailable being zero.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.HLE_ELISION_BUFFER_FULL",
+        "PublicDescription": "Number of times we could not allocate Lock Buffer.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/other.json b/tools/perf/pmu-events/arch/x86/skylakex/other.json
index f6b147ba8ef6..8b344259176f 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/other.json
@@ -1,34 +1,5 @@
 [
     {
-        "BriefDescription": "Core cycles the core was throttled due to a pending power level request.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.THROTTLE",
-        "PublicDescription": "Core cycles the out-of-order engine was throttled due to a pending power level request.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x40"
-    },
-    {
-        "BriefDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xFE",
-        "EventName": "IDI_MISC.WB_DOWNGRADE",
-        "PublicDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Number of PREFETCHW instructions executed.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
-    },
-    {
         "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
@@ -49,13 +20,24 @@
         "UMask": "0x18"
     },
     {
-        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.T0",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
+        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server michroarchtecture).  This includes high current AVX 512-bit instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Core cycles the core was throttled due to a pending power level request.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.THROTTLE",
+        "PublicDescription": "Core cycles the out-of-order engine was throttled due to a pending power level request.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
     },
     {
         "BriefDescription": "Number of hardware interrupts received by the processor.",
@@ -68,14 +50,32 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
+        "BriefDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x28",
-        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
-        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server michroarchtecture).  This includes high current AVX 512-bit instructions.",
-        "SampleAfterValue": "200003",
-        "UMask": "0x20"
+        "EventCode": "0xFE",
+        "EventName": "IDI_MISC.WB_DOWNGRADE",
+        "PublicDescription": "Counts number of cache lines that are dropped and not written back to L3 as they are deemed to be less likely to be reused shortly.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xFE",
+        "EventName": "IDI_MISC.WB_UPGRADE",
+        "PublicDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x09",
+        "EventName": "MEMORY_DISAMBIGUATION.HISTORY_RESET",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
         "BriefDescription": "Number of PREFETCHNTA instructions executed.",
@@ -87,30 +87,30 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
+        "BriefDescription": "Number of PREFETCHW instructions executed.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x32",
-        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
+        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
         "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "UMask": "0x8"
     },
     {
+        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x09",
-        "EventName": "MEMORY_DISAMBIGUATION.HISTORY_RESET",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T0",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly",
+        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xFE",
-        "EventName": "IDI_MISC.WB_UPGRADE",
-        "PublicDescription": "Counts number of cache lines that are allocated and written back to L3 with the intention that they are more likely to be reused shortly.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
index 3bfc6943ddf9..ca5748120666 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/pipeline.json
@@ -1,55 +1,58 @@
 [
     {
-        "BriefDescription": "Number of instructions retired. General Counter - architectural event",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091, SKL044",
-        "EventCode": "0xC0",
-        "EventName": "INST_RETIRED.ANY_P",
-        "PublicDescription": "Counts the number of instructions (EOMs) retired. Counting covers macro-fused instructions individually (that is, increments by two).",
-        "SampleAfterValue": "2000003"
-    },
-    {
-        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
+        "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.",
+        "EventCode": "0x14",
+        "EventName": "ARITH.DIVIDER_ACTIVE",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
+        "BriefDescription": "All (macro) branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
-        "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Counts all (macro) branch instructions retired.",
+        "SampleAfterValue": "400009"
     },
     {
-        "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.",
+        "BriefDescription": "All (macro) branch instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "PublicDescription": "This is a precise version of BR_INST_RETIRED.ALL_BRANCHES that counts all (macro) branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Conditional branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x14",
-        "EventName": "ARITH.DIVIDER_ACTIVE",
-        "SampleAfterValue": "2000003",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "False dependencies in MOB due to partial compare on address.",
+        "BriefDescription": "Not taken branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x07",
-        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
-        "PublicDescription": "Counts false dependencies in MOB when the partial comparison upon loose net check and dependency was resolved by the Enhanced Loose net mechanism. This may not result in high performance penalties. Loose net checks can fail when loads and stores are 4k aliased.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "Errata": "SKL091",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.COND_NTAKEN",
+        "PublicDescription": "This event counts not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
     },
     {
         "BriefDescription": "Far branch instructions retired.",
@@ -64,23 +67,81 @@
         "UMask": "0x40"
     },
     {
-        "BriefDescription": "Counts the number of x87 uops dispatched.",
+        "BriefDescription": "Direct and indirect near call instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.X87",
-        "PublicDescription": "Counts the number of x87 uops executed.",
-        "SampleAfterValue": "2000003",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Return instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PEBS": "1",
+        "PublicDescription": "This event counts return instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Taken branch instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "PublicDescription": "This event counts taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Not taken branch instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL091",
+        "EventCode": "0xC4",
+        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
+        "PublicDescription": "This event counts not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
+        "BriefDescription": "All mispredicted macro branch instructions retired.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x4C",
-        "EventName": "LOAD_HIT_PRE.SW_PF",
-        "PublicDescription": "Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.",
-        "SampleAfterValue": "100003",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch.  When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "Mispredicted macro branch instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
+        "PEBS": "2",
+        "PublicDescription": "This is a precise version of BR_MISP_RETIRED.ALL_BRANCHES that counts all mispredicted macro branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
+        "PEBS": "1",
+        "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
         "UMask": "0x1"
     },
     {
@@ -95,85 +156,99 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Total execution stalls.",
+        "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "EventCode": "0xC5",
+        "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
+        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "5",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x5"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "25003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
+        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.SLOW_LEA",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "25003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "AnyThread": "1",
+        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "10",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
+        "SampleAfterValue": "25003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Thread cycles when thread is not in halt state",
+        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
-        "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
-        "SampleAfterValue": "2000003"
+        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
+        "SampleAfterValue": "25003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
+        "BriefDescription": "Reference cycles when the core is not in halt state.",
+        "Counter": "Fixed counter 2",
+        "CounterHTOff": "Fixed counter 2",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'.  The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'.  After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
+        "SampleAfterValue": "25003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "AnyThread": "1",
+        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
         "SampleAfterValue": "25003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Number of machine clears (nukes) of any type.",
+        "BriefDescription": "Counts when there is a transition from ring 1, 2 or 3 to ring 0.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
         "EdgeDetect": "1",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.COUNT",
-        "SampleAfterValue": "100003",
-        "UMask": "0x1"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.RING0_TRANS",
+        "PublicDescription": "Counts when the Current Privilege Level (CPL) transitions from ring 1, 2 or 3 to ring 0 (Kernel).",
+        "SampleAfterValue": "100007"
+    },
+    {
+        "BriefDescription": "Core cycles when the thread is not in halt state",
+        "Counter": "Fixed counter 1",
+        "CounterHTOff": "Fixed counter 1",
+        "EventName": "CPU_CLK_UNHALTED.THREAD",
+        "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
         "AnyThread": "1",
@@ -185,177 +260,182 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
+        "BriefDescription": "Thread cycles when thread is not in halt state",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.THREAD",
-        "PublicDescription": "Number of uops to be executed per-thread each cycle.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
+        "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
+        "SampleAfterValue": "2000003"
     },
     {
-        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "EventCode": "0x3C",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
+        "SampleAfterValue": "2000003"
     },
     {
-        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.",
+        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
-        "Invert": "1",
+        "CounterMask": "8",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Cycles where the Store Buffer was full and no outstanding load.",
+        "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
+        "CounterMask": "1",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
+        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "8",
+        "CounterMask": "16",
         "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
+        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xA8",
-        "EventName": "LSD.CYCLES_ACTIVE",
-        "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).",
+        "CounterMask": "12",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0xc"
     },
     {
-        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread (e.g. misprediction or memory nuke)",
+        "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.RECOVERY_CYCLES",
-        "PublicDescription": "Core cycles the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
+        "CounterMask": "5",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x5"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
         "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
-        "SampleAfterValue": "25003",
-        "UMask": "0x1"
+        "CounterHTOff": "0,1,2,3",
+        "CounterMask": "20",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x14"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 0",
+        "BriefDescription": "Total execution stalls.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
+        "CounterMask": "4",
+        "EventCode": "0xA3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 1",
+        "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
+        "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 2",
+        "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 2.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
+        "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 3",
+        "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 3.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.3_PORTS_UTIL",
+        "PublicDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
         "UMask": "0x8"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 4",
+        "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 4.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
+        "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 5",
+        "BriefDescription": "Cycles where the Store Buffer was full and no outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 6",
+        "BriefDescription": "Cycles where no uops were executed, the Reservation Station was not empty, the Store Buffer was full and there was no outstanding load.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_6",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
+        "EventCode": "0xA6",
+        "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
+        "PublicDescription": "Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles per thread when uops are executed in port 7",
+        "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA1",
-        "EventName": "UOPS_DISPATCHED_PORT.PORT_7",
-        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 7.",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.LCP",
+        "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x80"
+        "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
+        "BriefDescription": "Instructions retired from execution.",
+        "Counter": "Fixed counter 0",
+        "CounterHTOff": "Fixed counter 0",
+        "EventName": "INST_RETIRED.ANY",
+        "PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
+        "BriefDescription": "Number of instructions retired. General Counter - architectural event",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "Errata": "SKL091, SKL044",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "PublicDescription": "Counts the number of instructions (EOMs) retired. Counting covers macro-fused instructions individually (that is, increments by two).",
+        "SampleAfterValue": "2000003"
+    },
+    {
         "BriefDescription": "Precise instruction retired event with HW to reduce effect of PEBS shadow in IP distribution",
         "Counter": "1",
         "CounterHTOff": "1",
@@ -368,24 +448,56 @@
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
+        "BriefDescription": "Number of cycles using always true condition applied to  PEBS instructions retired event.",
+        "Counter": "0,2,3",
+        "CounterHTOff": "0,2,3",
+        "CounterMask": "10",
+        "Errata": "SKL091, SKL044",
+        "EventCode": "0xC0",
+        "EventName": "INST_RETIRED.TOTAL_CYCLES_PS",
+        "Invert": "1",
+        "PEBS": "2",
+        "PublicDescription": "Number of cycles using an always true condition applied to  PEBS instructions retired event. (inst_ret< 16)",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles the issue-stage is waiting for front-end to fetch from resteered path following branch misprediction or machine clear events.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xA8",
-        "EventName": "LSD.CYCLES_4_UOPS",
-        "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread (e.g. misprediction or memory nuke)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES",
+        "PublicDescription": "Core cycles the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.",
+        "AnyThread": "1",
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for any thread running on the physical core (e.g. misprediction or memory nuke).",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.3_PORTS_UTIL",
-        "PublicDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.",
+        "EventCode": "0x0D",
+        "EventName": "INT_MISC.RECOVERY_CYCLES_ANY",
         "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.NO_SR",
+        "PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "SampleAfterValue": "100003",
         "UMask": "0x8"
     },
     {
@@ -399,108 +511,77 @@
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
+        "BriefDescription": "False dependencies in MOB due to partial compare on address.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0x5E",
-        "EventName": "RS_EVENTS.EMPTY_END",
-        "Invert": "1",
-        "PublicDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate front-end Latency Bound issues.",
-        "SampleAfterValue": "2000003",
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
+        "PublicDescription": "Counts false dependencies in MOB when the partial comparison upon loose net check and dependency was resolved by the Enhanced Loose net mechanism. This may not result in high performance penalties. Loose net checks can fail when loads and stores are 4k aliased.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
+        "BriefDescription": "Demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY",
-        "SampleAfterValue": "25003",
+        "EventCode": "0x4C",
+        "EventName": "LOAD_HIT_PRE.SW_PF",
+        "PublicDescription": "Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.",
+        "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.",
+        "BriefDescription": "Cycles 4 Uops delivered by the LSD, but didn't come from the decoder.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x59",
-        "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD",
-        "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.",
+        "CounterMask": "4",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_4_UOPS",
+        "PublicDescription": "Counts the cycles when 4 uops are delivered by the LSD (Loop-stream detector).",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
+        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.",
+        "EventCode": "0xA8",
+        "EventName": "LSD.CYCLES_ACTIVE",
+        "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Not taken branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xc4",
-        "EventName": "BR_INST_RETIRED.COND_NTAKEN",
-        "PublicDescription": "This event counts not taken branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Number of Uops delivered by the LSD.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "3",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "EventCode": "0xA8",
+        "EventName": "LSD.UOPS",
+        "PublicDescription": "Number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Number of machine clears (nukes) of any type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Reference cycles when the core is not in halt state.",
-        "Counter": "Fixed counter 2",
-        "CounterHTOff": "Fixed counter 2",
-        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
-        "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'.  The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'.  After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x3"
+        "EdgeDetect": "1",
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.COUNT",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "All mispredicted macro branch instructions retired.",
+        "BriefDescription": "Self-modifying code (SMC) detected.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
-        "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch.  When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.",
-        "SampleAfterValue": "400009"
+        "EventCode": "0xC3",
+        "EventName": "MACHINE_CLEARS.SMC",
+        "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
     },
     {
         "BriefDescription": "Number of times a microcode assist is invoked by HW other than FP-assist. Examples include AD (page Access Dirty) and AVX* related assists.",
@@ -512,448 +593,377 @@
         "UMask": "0x3f"
     },
     {
-        "BriefDescription": "Cycles without actually retired uops.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.STALL_CYCLES",
-        "Invert": "1",
-        "PublicDescription": "This event counts cycles without actually retired uops.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Number of Uops delivered by the LSD.",
+        "BriefDescription": "Cycles where the pipeline is stalled due to serializing operations.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA8",
-        "EventName": "LSD.UOPS",
-        "PublicDescription": "Number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
+        "EventCode": "0x59",
+        "EventName": "PARTIAL_RAT_STALLS.SCOREBOARD",
+        "PublicDescription": "This event counts cycles during which the microcode scoreboard stalls happen.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE",
-        "SampleAfterValue": "25003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
+        "BriefDescription": "Resource-related stall cycles",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x87",
-        "EventName": "ILD_STALL.LCP",
-        "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.",
+        "EventCode": "0xa2",
+        "EventName": "RESOURCE_STALLS.ANY",
+        "PublicDescription": "Counts resource-related stall cycles.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
+        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "16",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
+        "EventCode": "0xA2",
+        "EventName": "RESOURCE_STALLS.SB",
+        "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Taken branch instructions retired.",
+        "BriefDescription": "Increments whenever there is an update to the LBR array.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
-        "PEBS": "1",
-        "PublicDescription": "This event counts taken branch instructions retired.",
-        "SampleAfterValue": "400009",
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
+        "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use",
+        "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x03",
-        "EventName": "LD_BLOCKS.NO_SR",
-        "PublicDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "EventCode": "0xCC",
+        "EventName": "ROB_MISC_EVENTS.PAUSE_INST",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
+        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.ANY",
-        "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_CYCLES",
+        "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Core cycles when the thread is not in halt state",
-        "Counter": "Fixed counter 1",
-        "CounterHTOff": "Fixed counter 1",
-        "EventName": "CPU_CLK_UNHALTED.THREAD",
-        "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events.",
+        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate Frontend Latency Bound issues.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x5E",
+        "EventName": "RS_EVENTS.EMPTY_END",
+        "Invert": "1",
+        "PublicDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to precisely locate front-end Latency Bound issues.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core crystal clock cycles when at least one thread on the physical core is unhalted.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 0",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.REF_XCLK_ANY",
-        "SampleAfterValue": "25003",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_0",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Direct and indirect near call instructions retired.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 1",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_CALL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts both direct and indirect near call instructions retired.",
-        "SampleAfterValue": "100007",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_1",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of retired PAUSE instructions (that do not end up with a VMExit to the VMM; TSX aborted Instructions may be counted). This event is not supported on first SKL and KBL products.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 2",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xCC",
-        "EventName": "ROB_MISC_EVENTS.PAUSE_INST",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_2",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 2.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x40"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Resource-related stall cycles",
+        "BriefDescription": "Cycles per thread when uops are executed in port 3",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xa2",
-        "EventName": "RESOURCE_STALLS.ANY",
-        "PublicDescription": "Counts resource-related stall cycles.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_3",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 3.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Self-modifying code (SMC) detected.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 4",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC3",
-        "EventName": "MACHINE_CLEARS.SMC",
-        "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_4",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 4.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 5",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
-        "SampleAfterValue": "25003",
-        "UMask": "0x2"
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_5",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
+        "BriefDescription": "Cycles per thread when uops are executed in port 6",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "4",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
-        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_6",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x40"
     },
     {
-        "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
+        "BriefDescription": "Cycles per thread when uops are executed in port 7",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
-        "PEBS": "1",
-        "SampleAfterValue": "400009",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "CounterMask": "20",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
+        "EventCode": "0xA1",
+        "EventName": "UOPS_DISPATCHED_PORT.PORT_7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 7.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x14"
+        "UMask": "0x80"
     },
     {
-        "BriefDescription": "Cycles where no uops were executed, the Reservation Station was not empty, the Store Buffer was full and there was no outstanding load.",
+        "BriefDescription": "Number of uops executed on the core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
-        "PublicDescription": "Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE",
+        "PublicDescription": "Number of uops executed from any thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Number of cycles using always true condition applied to  PEBS instructions retired event.",
-        "Counter": "0,2,3",
-        "CounterHTOff": "0,2,3",
-        "CounterMask": "10",
-        "Errata": "SKL091, SKL044",
-        "EventCode": "0xC0",
-        "EventName": "INST_RETIRED.TOTAL_CYCLES_PS",
-        "Invert": "1",
-        "PEBS": "2",
-        "PublicDescription": "Number of cycles using an always true condition applied to  PEBS instructions retired event. (inst_ret< 16)",
+        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Retirement slots used.",
+        "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC2",
-        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
-        "PublicDescription": "Counts the retirement slots used.",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "AnyThread": "1",
-        "BriefDescription": "Core cycles when at least one thread on the physical core is not in halt state.",
+        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.THREAD_P_ANY",
-        "SampleAfterValue": "2000003"
+        "CounterMask": "3",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
+        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0E",
-        "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
-        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
         "SampleAfterValue": "2000003",
         "UMask": "0x2"
     },
     {
-        "BriefDescription": "Increments whenever there is an update to the LBR array.",
+        "BriefDescription": "Cycles with no micro-ops executed from any thread on physical core.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xCC",
-        "EventName": "ROB_MISC_EVENTS.LBR_INSERTS",
-        "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_NONE",
+        "Invert": "1",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
+        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x5E",
-        "EventName": "RS_EVENTS.EMPTY_CYCLES",
-        "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for the thread.; Note: In ST-mode, not active thread should drive 0. This is usually caused by severely costly branch mispredictions, or allocator/FE issues.",
+        "CounterMask": "1",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
+        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Return instructions retired.",
+        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
-        "PEBS": "1",
-        "PublicDescription": "This event counts return instructions retired.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x8"
-    },
-    {
-        "BriefDescription": "Instructions retired from execution.",
-        "Counter": "Fixed counter 0",
-        "CounterHTOff": "Fixed counter 0",
-        "EventName": "INST_RETIRED.ANY",
-        "PublicDescription": "Counts the number of instructions retired from execution. For instructions that consist of multiple micro-ops, Counts the retirement of the last micro-op of the instruction. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter, leaving the four (eight when Hyperthreading is disabled) programmable counters available for other events. INST_RETIRED.ANY_P is counted by a programmable counter and it is an architectural performance event. Counting: Faulting executions of GETSEC/VM entry/VM Exit/MWait will not count as retired instructions.",
+        "CounterMask": "2",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_2_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
         "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
+        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "2",
+        "CounterMask": "3",
         "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_3_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
+        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA2",
-        "EventName": "RESOURCE_STALLS.SB",
-        "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
+        "CounterMask": "4",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_4_UOPS_EXEC",
+        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts when there is a transition from ring 1, 2 or 3 to ring 0.",
+        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EdgeDetect": "1",
-        "EventCode": "0x3C",
-        "EventName": "CPU_CLK_UNHALTED.RING0_TRANS",
-        "PublicDescription": "Counts when the Current Privilege Level (CPL) transitions from ring 1, 2 or 3 to ring 0 (Kernel).",
-        "SampleAfterValue": "100007"
-    },
-    {
-        "BriefDescription": "All (macro) branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.ALL_BRANCHES_PEBS",
-        "PEBS": "2",
-        "PublicDescription": "This is a precise version of BR_INST_RETIRED.ALL_BRANCHES that counts all (macro) branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x4"
-    },
-    {
-        "BriefDescription": "Mispredicted macro branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES_PEBS",
-        "PEBS": "2",
-        "PublicDescription": "This is a precise version of BR_MISP_RETIRED.ALL_BRANCHES that counts all mispredicted macro branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x4"
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
+        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
-        "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.THREAD",
+        "PublicDescription": "Number of uops to be executed per-thread each cycle.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Not taken branch instructions retired.",
+        "BriefDescription": "Counts the number of x87 uops dispatched.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.NOT_TAKEN",
-        "PublicDescription": "This event counts not taken branch instructions retired.",
-        "SampleAfterValue": "400009",
+        "EventCode": "0xB1",
+        "EventName": "UOPS_EXECUTED.X87",
+        "PublicDescription": "Counts the number of x87 uops executed.",
+        "SampleAfterValue": "2000003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Conditional branch instructions retired.",
+        "BriefDescription": "Uops that Resource Allocation Table (RAT) issues to Reservation Station (RS)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.CONDITIONAL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts conditional branch instructions retired.",
-        "SampleAfterValue": "400009",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.ANY",
+        "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
+        "SampleAfterValue": "2000003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "BriefDescription": "Number of slow LEA uops being allocated. A uop is generally considered SlowLea if it has 3 sources (e.g. 2 sources + immediate) regardless if as a result of LEA instruction or not.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xC5",
-        "EventName": "BR_MISP_RETIRED.CONDITIONAL",
-        "PEBS": "1",
-        "PublicDescription": "This event counts mispredicted conditional branch instructions retired.",
-        "SampleAfterValue": "400009",
-        "UMask": "0x1"
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.SLOW_LEA",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Number of uops executed on the core.",
+        "BriefDescription": "Cycles when Resource Allocation Table (RAT) does not issue Uops to Reservation Station (RS) for the thread",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CORE",
-        "PublicDescription": "Number of uops executed from any thread.",
+        "CounterMask": "1",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
+        "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "12",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
+        "EventCode": "0x0E",
+        "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
+        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
         "SampleAfterValue": "2000003",
-        "UMask": "0xc"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
+        "BriefDescription": "Number of macro-fused uops retired. (non precise)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xA6",
-        "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
-        "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.MACRO_FUSED",
+        "PublicDescription": "Counts the number of macro-fused uops retired. (non precise)",
         "SampleAfterValue": "2000003",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Cycles the issue-stage is waiting for front-end to fetch from resteered path following branch misprediction or machine clear events.",
+        "BriefDescription": "Retirement slots used.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x0D",
-        "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.RETIRE_SLOTS",
+        "PublicDescription": "Counts the retirement slots used.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x80"
-    },
-    {
-        "BriefDescription": "All (macro) branch instructions retired.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "Errata": "SKL091",
-        "EventCode": "0xC4",
-        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
-        "PublicDescription": "Counts all (macro) branch instructions retired.",
-        "SampleAfterValue": "400009"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
+        "BriefDescription": "Cycles without actually retired uops.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "CounterMask": "1",
-        "EventCode": "0xB1",
-        "EventName": "UOPS_EXECUTED.CYCLES_GE_1_UOP_EXEC",
-        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.STALL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "This event counts cycles without actually retired uops.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
+        "BriefDescription": "Cycles with less than 10 actually retired uops.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0xA3",
-        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
+        "CounterMask": "10",
+        "EventCode": "0xC2",
+        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
+        "Invert": "1",
+        "PublicDescription": "Number of cycles using always true condition (uops_ret < 16) applied to non PEBS uops retired event.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x1"
+        "UMask": "0x2"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
index 0dd8b13b5cfb..863c9e103969 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/skx-metrics.json
@@ -1,62 +1,5 @@
 [
     {
-        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Frontend_Bound",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Frontend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where the processor's Frontend undersupplies its Backend. Frontend denotes the first part of the processor core responsible to fetch operations that are executed later on by the Backend part. Within the Frontend; a branch predictor predicts the next address to fetch; cache-lines are fetched from the memory subsystem; parsed into instructions; and lastly decoded into micro-operations (uops). Ideally the Frontend can issue Machine_Width uops every cycle to the Backend. Frontend Bound denotes unutilized issue-slots when there is no Backend stall; i.e. bubbles where Frontend delivered no uops while Backend could have accepted them. For example; stalls due to instruction-cache misses would be categorized under Frontend Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Bad_Speculation",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots wasted due to incorrect speculations. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Bad_Speculation_SMT",
-        "PublicDescription": "This category represents fraction of slots wasted due to incorrect speculations. This include slots used to issue uops that do not eventually get retired and slots for which the issue-pipeline was blocked due to recovery from earlier incorrect speculation. For example; wasted work due to miss-predicted branches are categorized under Bad Speculation category. Incorrect data speculation followed by Memory Ordering Nukes is another example. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend",
-        "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * cycles)) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles)) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)) )",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Backend_Bound",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "1 - ( (IDQ_UOPS_NOT_DELIVERED.CORE / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) + (UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) )",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Backend_Bound_SMT",
-        "PublicDescription": "This category represents fraction of slots where no uops are being delivered due to a lack of required resources for accepting new uops in the Backend. Backend is the portion of the processor core where the out-of-order scheduler dispatches ready uops into their respective execution units; and once completed these uops get retired according to program order. For example; stalls due to data-cache misses or stalls due to the divider unit being overloaded are both categorized under Backend Bound. Backend Bound is further divided into two main categories: Memory Bound and Core Bound. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * cycles)",
-        "MetricGroup": "TopdownL1",
-        "MetricName": "Retiring",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. "
-    },
-    {
-        "BriefDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. SMT version; use when SMT is enabled and measuring per logical CPU.",
-        "MetricExpr": "UOPS_RETIRED.RETIRE_SLOTS / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))",
-        "MetricGroup": "TopdownL1_SMT",
-        "MetricName": "Retiring_SMT",
-        "PublicDescription": "This category represents fraction of slots utilized by useful work i.e. issued uops that eventually get retired. Ideally; all pipeline slots would be attributed to the Retiring category.  Retiring of 100% would indicate the maximum 4 uops retired per cycle has been achieved.  Maximizing Retiring typically increases the Instruction-Per-Cycle metric. Note that a high Retiring value does not necessary mean there is no room for more performance.  For example; Microcode assists are categorized under Retiring. They hurt performance and can often be avoided. SMT version; use when SMT is enabled and measuring per logical CPU."
-    },
-    {
         "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
         "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "Summary",
@@ -71,49 +14,79 @@
     {
         "BriefDescription": "Instruction per taken branch",
         "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
-        "MetricGroup": "Branches;Fetch_BW;PGO",
+        "MetricGroup": "Branches;FetchBW;PGO",
         "MetricName": "IpTB"
     },
     {
         "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
-        "MetricExpr": "1 / (INST_RETIRED.ANY / cycles)",
-        "MetricGroup": "Pipeline;Summary",
+        "MetricExpr": "1 / (INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD)",
+        "MetricGroup": "Pipeline",
         "MetricName": "CPI"
     },
     {
         "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.",
         "MetricExpr": "CPU_CLK_UNHALTED.THREAD",
-        "MetricGroup": "Summary",
+        "MetricGroup": "Pipeline",
         "MetricName": "CLKS"
     },
     {
-        "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * cycles",
-        "MetricGroup": "TopDownL1",
-        "MetricName": "SLOTS"
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC"
     },
     {
-        "BriefDescription": "Total issue-pipeline slots (per-Physical Core till ICL; per-Logical Processor ICL onward)",
-        "MetricExpr": "4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "TopDownL1_SMT",
-        "MetricName": "SLOTS_SMT"
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC_SMT"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Flops",
+        "MetricName": "FLOPc"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
+        "MetricGroup": "Flops_SMT",
+        "MetricName": "FLOPc_SMT"
+    },
+    {
+        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
+        "MetricExpr": "UOPS_EXECUTED.THREAD / (( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 ) if #SMT_on else UOPS_EXECUTED.CORE_CYCLES_GE_1)",
+        "MetricGroup": "Pipeline;PortsUtil",
+        "MetricName": "ILP"
+    },
+    {
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "BrMispredicts",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
+        "MetricExpr": "( CPU_CLK_UNHALTED.THREAD_ANY / 2 ) if #SMT_on else CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "SMT",
+        "MetricName": "CORE_CLKS"
     },
     {
         "BriefDescription": "Instructions per Load (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS",
-        "MetricGroup": "Instruction_Type",
+        "MetricGroup": "InsType",
         "MetricName": "IpLoad"
     },
     {
         "BriefDescription": "Instructions per Store (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES",
-        "MetricGroup": "Instruction_Type",
+        "MetricGroup": "InsType",
         "MetricName": "IpStore"
     },
     {
         "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "Branches;Instruction_Type",
+        "MetricGroup": "Branches;InsType",
         "MetricName": "IpBranch"
     },
     {
@@ -131,176 +104,122 @@
     {
         "BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
         "MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
-        "MetricGroup": "FLOPS;FP_Arith;Instruction_Type",
+        "MetricGroup": "Flops;FpArith;InsType",
         "MetricName": "IpFLOP"
     },
     {
-        "BriefDescription": "Total number of retired Instructions",
+        "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
         "MetricExpr": "INST_RETIRED.ANY",
-        "MetricGroup": "Summary;TopDownL1",
+        "MetricGroup": "Summary;TmaL1",
         "MetricName": "Instructions"
     },
     {
         "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
         "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
-        "MetricGroup": "DSB;Fetch_BW",
+        "MetricGroup": "DSB;FetchBW",
         "MetricName": "DSB_Coverage"
     },
     {
-        "BriefDescription": "Instructions Per Cycle (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / cycles",
-        "MetricGroup": "SMT;TopDownL1",
-        "MetricName": "CoreIPC"
-    },
-    {
-        "BriefDescription": "Instructions Per Cycle (per physical core)",
-        "MetricExpr": "INST_RETIRED.ANY / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "SMT;TopDownL1",
-        "MetricName": "CoreIPC_SMT"
-    },
-    {
-        "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / cycles",
-        "MetricGroup": "FLOPS",
-        "MetricName": "FLOPc"
-    },
-    {
-        "BriefDescription": "Floating Point Operations Per Cycle",
-        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "FLOPS_SMT",
-        "MetricName": "FLOPc_SMT"
-    },
-    {
-        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
-        "MetricExpr": "UOPS_EXECUTED.THREAD / ( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 )",
-        "MetricGroup": "Pipeline;Ports_Utilization",
-        "MetricName": "ILP"
-    },
-    {
-        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per non-speculative branch misprediction (jeclear)",
-        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * INT_MISC.RECOVERY_CYCLES ) / (4 * cycles))) + (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * cycles)) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * cycles)) ) * (4 * cycles) / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts",
-        "MetricName": "Branch_Misprediction_Cost"
-    },
-    {
-        "BriefDescription": "Branch Misprediction Cost: Fraction of TopDown slots wasted per non-speculative branch misprediction (jeclear)",
-        "MetricExpr": "( ((BR_MISP_RETIRED.ALL_BRANCHES / ( BR_MISP_RETIRED.ALL_BRANCHES + MACHINE_CLEARS.COUNT )) * (( UOPS_ISSUED.ANY - UOPS_RETIRED.RETIRE_SLOTS + 4 * ( INT_MISC.RECOVERY_CYCLES_ANY / 2 ) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )))) + (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) * (( INT_MISC.CLEAR_RESTEER_CYCLES + 9 * BACLEARS.ANY ) / cycles) / (4 * ( IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE - ( FRONTEND_RETIRED.LATENCY_GE_1 - FRONTEND_RETIRED.LATENCY_GE_2 ) / (UOPS_RETIRED.RETIRE_SLOTS / UOPS_ISSUED.ANY) ) / (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ))) ) * (4 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )) / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts_SMT",
-        "MetricName": "Branch_Misprediction_Cost_SMT"
-    },
-    {
-        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
-        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
-        "MetricGroup": "BrMispredicts",
-        "MetricName": "IpMispredict"
-    },
-    {
-        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
-        "MetricExpr": "( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) )",
-        "MetricGroup": "SMT",
-        "MetricName": "CORE_CLKS"
-    },
-    {
         "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
         "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
-        "MetricGroup": "Memory_Bound;Memory_Lat",
+        "MetricGroup": "MemoryBound;MemoryLat",
         "MetricName": "Load_Miss_Real_Latency"
     },
     {
         "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
         "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
-        "MetricGroup": "Memory_Bound;Memory_BW",
+        "MetricGroup": "MemoryBound;MemoryBW",
         "MetricName": "MLP"
     },
     {
         "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
         "MetricConstraint": "NO_NMI_WATCHDOG",
-        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * cycles )",
-        "MetricGroup": "TLB",
+        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * CORE_CLKS )",
+        "MetricGroup": "MemoryTLB",
         "MetricName": "Page_Walks_Utilization"
     },
     {
-        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
-        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING + EPT.WALK_PENDING ) / ( 2 * ( ( CPU_CLK_UNHALTED.THREAD / 2 ) * ( 1 + CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_XCLK ) ) )",
-        "MetricGroup": "TLB_SMT",
-        "MetricName": "Page_Walks_Utilization_SMT"
-    },
-    {
         "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
         "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L1D_Cache_Fill_BW"
     },
     {
         "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
         "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L2_Cache_Fill_BW"
     },
     {
         "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
         "MetricExpr": "64 * LONGEST_LAT_CACHE.MISS / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW",
+        "MetricGroup": "MemoryBW",
         "MetricName": "L3_Cache_Fill_BW"
     },
     {
-        "BriefDescription": "Average per-core data fill bandwidth to the L3 cache [GB / sec]",
+        "BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
         "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
-        "MetricGroup": "Memory_BW;Offcore",
+        "MetricGroup": "MemoryBW;Offcore",
         "MetricName": "L3_Cache_Access_BW"
     },
     {
         "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L1MPKI"
     },
     {
         "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L2MPKI"
     },
     {
         "BriefDescription": "L2 cache misses per kilo instruction for all request types (including speculative)",
         "MetricExpr": "1000 * L2_RQSTS.MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses;Offcore",
+        "MetricGroup": "CacheMisses;Offcore",
         "MetricName": "L2MPKI_All"
     },
     {
         "BriefDescription": "L2 cache hits per kilo instruction for all request types (including speculative)",
         "MetricExpr": "1000 * ( L2_RQSTS.REFERENCES - L2_RQSTS.MISS ) / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L2HPKI_All"
     },
     {
         "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
         "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
-        "MetricGroup": "Cache_Misses",
+        "MetricGroup": "CacheMisses",
         "MetricName": "L3MPKI"
     },
     {
         "BriefDescription": "Rate of silent evictions from the L2 cache per Kilo instruction where the evicted lines are dropped (no writeback to L3 or memory)",
         "MetricExpr": "1000 * L2_LINES_OUT.SILENT / INST_RETIRED.ANY",
-        "MetricGroup": "",
+        "MetricGroup": "L2Evicts;Server",
         "MetricName": "L2_Evictions_Silent_PKI"
     },
     {
         "BriefDescription": "Rate of non silent evictions from the L2 cache per Kilo instruction",
         "MetricExpr": "1000 * L2_LINES_OUT.NON_SILENT / INST_RETIRED.ANY",
-        "MetricGroup": "",
+        "MetricGroup": "L2Evicts;Server",
         "MetricName": "L2_Evictions_NonSilent_PKI"
     },
     {
         "BriefDescription": "Average CPU Utilization",
         "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
-        "MetricGroup": "Summary",
+        "MetricGroup": "HPC;Summary",
         "MetricName": "CPU_Utilization"
     },
     {
+        "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
+        "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time",
+        "MetricGroup": "Summary;Power",
+        "MetricName": "Average_Frequency"
+    },
+    {
         "BriefDescription": "Giga Floating Point Operations Per Second",
         "MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
-        "MetricGroup": "FLOPS;Summary",
+        "MetricGroup": "Flops;HPC",
         "MetricName": "GFLOPs"
     },
     {
@@ -311,44 +230,44 @@
     },
     {
         "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
-        "MetricExpr": "1 - CPU_CLK_THREAD_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_THREAD_UNHALTED.REF_XCLK_ANY / 2 )",
-        "MetricGroup": "SMT;Summary",
+        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / ( CPU_CLK_UNHALTED.REF_XCLK_ANY / 2 ) if #SMT_on else 0",
+        "MetricGroup": "SMT",
         "MetricName": "SMT_2T_Utilization"
     },
     {
         "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode",
-        "MetricExpr": "CPU_CLK_UNHALTED.THREAD:k / CPU_CLK_UNHALTED.THREAD",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / CPU_CLK_UNHALTED.THREAD",
         "MetricGroup": "OS",
         "MetricName": "Kernel_Utilization"
     },
     {
         "BriefDescription": "Average external Memory Bandwidth Use for reads and writes [GB / sec]",
-        "MetricExpr": "( ( ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) * 1048576 ) / 1000000000 ) / duration_time",
-        "MetricGroup": "Memory_BW;SoC",
+        "MetricExpr": "( 64 * ( uncore_imc@cas_count_read@ + uncore_imc@cas_count_write@ ) / 1000000000 ) / duration_time",
+        "MetricGroup": "HPC;MemoryBW;SoC",
         "MetricName": "DRAM_BW_Use"
     },
     {
         "BriefDescription": "Average latency of data read request to external memory (in nanoseconds). Accounts for demand loads and L1/L2 prefetches",
         "MetricExpr": "1000000000 * ( cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x35\\,umask\\=0x21\\,config\\=0x40433@ ) / ( cha_0@event\\=0x0@ / duration_time )",
-        "MetricGroup": "Memory_Lat;SoC",
+        "MetricGroup": "MemoryLat;SoC",
         "MetricName": "MEM_Read_Latency"
     },
     {
         "BriefDescription": "Average number of parallel data read requests to external memory. Accounts for demand loads and L1/L2 prefetches",
         "MetricExpr": "cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433@ / cha@event\\=0x36\\,umask\\=0x21\\,config\\=0x40433\\,thresh\\=1@",
-        "MetricGroup": "Memory_BW;SoC",
+        "MetricGroup": "MemoryBW;SoC",
         "MetricName": "MEM_Parallel_Reads"
     },
     {
         "BriefDescription": "Average IO (network or disk) Bandwidth Use for Writes [GB / sec]",
         "MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_READ.PART3 ) * 4 / 1000000000 / duration_time",
-        "MetricGroup": "IO_BW;SoC;Server",
+        "MetricGroup": "IoBW;SoC;Server",
         "MetricName": "IO_Write_BW"
     },
     {
         "BriefDescription": "Average IO (network or disk) Bandwidth Use for Reads [GB / sec]",
         "MetricExpr": "( UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART0 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART1 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART2 + UNC_IIO_DATA_REQ_OF_CPU.MEM_WRITE.PART3 ) * 4 / 1000000000 / duration_time",
-        "MetricGroup": "IO_BW;SoC;Server",
+        "MetricGroup": "IoBW;SoC;Server",
         "MetricName": "IO_Read_BW"
     },
     {
@@ -359,7 +278,7 @@
     },
     {
         "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]",
-        "MetricExpr": "INST_RETIRED.ANY / ( BR_INST_RETIRED.FAR_BRANCH / 2 )",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u",
         "MetricGroup": "Branches;OS",
         "MetricName": "IpFarBranch"
     },
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json
index b80b5d66385d..0b66e6af8177 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-memory.json
@@ -65,15 +65,6 @@
         "Unit": "iMC"
     },
     {
-        "BriefDescription": "Pre-charge for writes",
-        "Counter": "0,1,2,3",
-        "EventCode": "0x2",
-        "EventName": "UNC_M_PRE_COUNT.WR",
-        "PerPkg": "1",
-        "UMask": "0x8",
-        "Unit": "iMC"
-    },
-    {
         "BriefDescription": "DRAM Page Activate commands sent due to a write request",
         "Counter": "0,1,2,3",
         "EventCode": "0x1",
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
index d7a0270de983..6ed92bc5c129 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/uncore-other.json
@@ -104,15 +104,6 @@
         "Unit": "CHA"
     },
     {
-        "BriefDescription": "write requests from remote home agent",
-        "Counter": "0,1,2,3",
-        "EventCode": "0x50",
-        "EventName": "UNC_CHA_REQUESTS.WRITES_REMOTE",
-        "PerPkg": "1",
-        "UMask": "0x08",
-        "Unit": "CHA"
-    },
-    {
         "BriefDescription": "UPI interconnect send bandwidth for payload. Derived from unc_upi_txl_flits.all_data",
         "Counter": "0,1,2,3",
         "EventCode": "0x2",
@@ -533,7 +524,7 @@
         "EventCode": "0x5C",
         "EventName": "UNC_CHA_SNOOP_RESP.RSP_WBWB",
         "PerPkg": "1",
-        "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to it's home.  This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured.  This response will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.",
+        "PublicDescription": "Counts when a transaction with the opcode type Rsp*WB Snoop Response was received which indicates which indicates the data was written back to it's home.  This is returned when a non-RFO request hits a cacheline in the Modified state. The Cache can either downgrade the cacheline to a S (Shared) or I (Invalid) state depending on how the system has been configured.  This reponse will also be sent when a cache requests E (Exclusive) ownership of a cache line without receiving data, because the cache must acquire ownership.",
         "UMask": "0x10",
         "Unit": "CHA"
     },
@@ -547,6 +538,98 @@
         "Unit": "IIO"
     },
     {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART0",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x01",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 0",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART1",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x02",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 1",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART2",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x04",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 2",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xC2",
+        "EventName": "UNC_IIO_COMP_BUF_INSERTS.CMPD.PART3",
+        "FCMask": "0x4",
+        "PerPkg": "1",
+        "PortMask": "0x08",
+        "PublicDescription": "PCIe Completion Buffer Inserts of completions with data: Part 3",
+        "UMask": "0x03",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART0",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 0",
+        "UMask": "0x01",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART1",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 1",
+        "UMask": "0x02",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART2",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 2",
+        "UMask": "0x04",
+        "Unit": "IIO"
+    },
+    {
+        "BriefDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+        "Counter": "2,3",
+        "EventCode": "0xD5",
+        "EventName": "UNC_IIO_COMP_BUF_OCCUPANCY.CMPD.PART3",
+        "FCMask": "0x04",
+        "PerPkg": "1",
+        "PublicDescription": "PCIe Completion Buffer occupancy of completions with data: Part 3",
+        "UMask": "0x08",
+        "Unit": "IIO"
+    },
+    {
         "BriefDescription": "Read request for 4 bytes made by the CPU to IIO Part0",
         "Counter": "2,3",
         "EventCode": "0xC0",
@@ -1219,6 +1302,64 @@
         "Unit": "IIO"
     },
     {
+        "BriefDescription": "Total IRP occupancy of inbound read and write requests.",
+        "Counter": "0,1",
+        "EventCode": "0xF",
+        "EventName": "UNC_I_CACHE_TOTAL_OCCUPANCY.MEM",
+        "PerPkg": "1",
+        "PublicDescription": "Total IRP occupancy of inbound read and write requests.  This is effectively the sum of read occupancy and write occupancy.",
+        "UMask": "0x4",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline.",
+        "Counter": "0,1",
+        "EventCode": "0x10",
+        "EventName": "UNC_I_COHERENT_OPS.PCITOM",
+        "PerPkg": "1",
+        "PublicDescription": "PCIITOM request issued by the IRP unit to the mesh with the intention of writing a full cacheline to coherent memory, without a RFO.  PCIITOM is a speculative Invalidate to Modified command that requests ownership of the cacheline and does not move data from the mesh to IRP cache.",
+        "UMask": "0x10",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline.",
+        "Counter": "0,1",
+        "EventCode": "0x10",
+        "EventName": "UNC_I_COHERENT_OPS.RFO",
+        "PerPkg": "1",
+        "PublicDescription": "RFO request issued by the IRP unit to the mesh with the intention of writing a partial cacheline to coherent memory.  RFO is a Read For Ownership command that requests ownership of the cacheline and moves data from the mesh to IRP cache.",
+        "UMask": "0x8",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Inbound read requests received by the IRP and inserted into the FAF queue.",
+        "Counter": "0,1",
+        "EventCode": "0x18",
+        "EventName": "UNC_I_FAF_INSERTS",
+        "PerPkg": "1",
+        "PublicDescription": "Inbound read requests to coherent memory, received by the IRP and inserted into the Fire and Forget queue (FAF), a queue used for processing inbound reads in the IRP.",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Occupancy of the IRP FAF queue.",
+        "Counter": "0,1",
+        "EventCode": "0x19",
+        "EventName": "UNC_I_FAF_OCCUPANCY",
+        "PerPkg": "1",
+        "PublicDescription": "Occupancy of the IRP Fire and Forget (FAF) queue, a queue used for processing inbound reads in the IRP.",
+        "Unit": "IRP"
+    },
+    {
+        "BriefDescription": "Inbound write (fast path) requests received by the IRP.",
+        "Counter": "0,1",
+        "EventCode": "0x11",
+        "EventName": "UNC_I_TRANSACTIONS.WR_PREF",
+        "PerPkg": "1",
+        "PublicDescription": "Inbound write (fast path) requests to coherent memory, received by the IRP resulting in write ownership requests issued by IRP to the mesh.",
+        "UMask": "0x8",
+        "Unit": "IRP"
+    },
+    {
         "BriefDescription": "Traffic in which the M2M to iMC Bypass was not taken",
         "Counter": "0,1,2,3",
         "EventCode": "0x22",
@@ -1466,7 +1607,7 @@
         "EventCode": "0x57",
         "EventName": "UNC_M2M_PREFCAM_INSERTS",
         "PerPkg": "1",
-        "PublicDescription": "Counts when the M2M (Mesh to Memory) receives a prefetch request and inserts it into its outstanding prefetch queue.  Explanatory Side Note: the prefect queue is made from CAM: Content Addressable Memory",
+        "PublicDescription": "Counts when the M2M (Mesh to Memory) recieves a prefetch request and inserts it into its outstanding prefetch queue.  Explanatory Side Note: the prefect queue is made from CAM: Content Addressable Memory",
         "Unit": "M2M"
     },
     {
@@ -1605,7 +1746,7 @@
         "EventCode": "0x31",
         "EventName": "UNC_UPI_RxL_BYPASSED.SLOT0",
         "PerPkg": "1",
-        "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot0 RxQ buffer (Receive Queue) and passed directly to the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+        "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot0 RxQ buffer (Receive Queue) and passed directly to the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
         "UMask": "0x1",
         "Unit": "UPI LL"
     },
@@ -1615,17 +1756,17 @@
         "EventCode": "0x31",
         "EventName": "UNC_UPI_RxL_BYPASSED.SLOT1",
         "PerPkg": "1",
-        "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot1 RxQ buffer  (Receive Queue) and passed directly across the BGF and into the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+        "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot1 RxQ buffer  (Receive Queue) and passed directly across the BGF and into the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
         "UMask": "0x2",
         "Unit": "UPI LL"
     },
     {
-        "BriefDescription": "FLITs received which bypassed the Slot0 Receive Buffer",
+        "BriefDescription": "FLITs received which bypassed the Slot0 Recieve Buffer",
         "Counter": "0,1,2,3",
         "EventCode": "0x31",
         "EventName": "UNC_UPI_RxL_BYPASSED.SLOT2",
         "PerPkg": "1",
-        "PublicDescription": "Counts incoming FLITs (FLow control unITs) which bypassed the slot2 RxQ buffer (Receive Queue)  and passed directly to the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transferred, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
+        "PublicDescription": "Counts incoming FLITs (FLow control unITs) whcih bypassed the slot2 RxQ buffer (Receive Queue)  and passed directly to the Egress.  This is a latency optimization, and should generally be the common case.  If this value is less than the number of FLITs transfered, it implies that there was queueing getting onto the ring, and thus the transactions saw higher latency.",
         "UMask": "0x4",
         "Unit": "UPI LL"
     },
diff --git a/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json b/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
index bbeee1058096..792ca39f013a 100644
--- a/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
+++ b/tools/perf/pmu-events/arch/x86/skylakex/virtual-memory.json
@@ -1,103 +1,74 @@
 [
     {
-        "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.STLB_HIT",
-        "SampleAfterValue": "100003",
-        "UMask": "0x20"
-    },
-    {
-        "BriefDescription": "Store misses in all DTLB levels that cause page walks",
+        "BriefDescription": "Load misses in all DTLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK",
-        "PublicDescription": "Counts demand data stores that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK",
+        "PublicDescription": "Counts demand data loads that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data store to a 2M/4M page",
+        "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 2M/4M pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x4"
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
+        "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
     },
     {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_PENDING",
-        "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture.",
+        "CounterMask": "1",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE",
+        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a load.",
         "SampleAfterValue": "100003",
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts completed page walks (4K page size) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB. The page walk can end with or without a fault.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x2"
-    },
-    {
-        "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xAE",
-        "EventName": "ITLB.ITLB_FLUSH",
-        "PublicDescription": "Counts the number of flushes of the big or small ITLB pages. Counting include both TLB Flush (covering all sets) and TLB Set Clear (set-specific).",
-        "SampleAfterValue": "100007",
-        "UMask": "0x1"
-    },
-    {
-        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_ACTIVE",
-        "PublicDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x10"
+        "UMask": "0xe"
     },
     {
-        "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
+        "BriefDescription": "Page walk completed due to a demand data load to a 1G page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
-        "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks  (1G sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x20"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Page walk completed due to a demand data load to a 2M/4M page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
-        "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
+        "PublicDescription": "Counts completed page walks  (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "DTLB flush attempts of the thread-specific entries",
+        "BriefDescription": "Page walk completed due to a demand data load to a 4K page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xBD",
-        "EventName": "TLB_FLUSH.DTLB_THREAD",
-        "PublicDescription": "Counts the number of DTLB flush attempts of the thread-specific entries.",
-        "SampleAfterValue": "100007",
-        "UMask": "0x1"
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
+        "PublicDescription": "Counts completed page walks  (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
     },
     {
         "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
@@ -110,23 +81,12 @@
         "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Store misses in all DTLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
         "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_ACTIVE",
-        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a store.",
-        "SampleAfterValue": "100003",
-        "UMask": "0x10"
-    },
-    {
-        "BriefDescription": "Misses at all ITLB levels that cause page walks",
-        "Counter": "0,1,2,3",
-        "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK",
-        "PublicDescription": "Counts page walks of any page size (4K/2M/4M/1G) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB, but the walk need not have completed.",
+        "EventName": "DTLB_STORE_MISSES.MISS_CAUSES_A_WALK",
+        "PublicDescription": "Counts demand data stores that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
         "SampleAfterValue": "100003",
         "UMask": "0x1"
     },
@@ -141,125 +101,135 @@
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
         "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts demand data stores that caused a completed page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+        "EventName": "DTLB_STORE_MISSES.WALK_ACTIVE",
+        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a store.",
         "SampleAfterValue": "100003",
-        "UMask": "0xe"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts demand data loads that caused a completed page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels. The page walk can end with or without a fault.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
         "UMask": "0xe"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data store to a 4K page",
+        "BriefDescription": "Page walk completed due to a demand data store to a 1G page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks  (1G sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x2"
+        "UMask": "0x8"
     },
     {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (1G)",
+        "BriefDescription": "Page walk completed due to a demand data store to a 2M/4M page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts store misses in all DTLB levels that cause a completed page walk (1G page size). The page walk can end with or without a fault.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
+        "PublicDescription": "Counts completed page walks  (2M/4M sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x4"
     },
     {
-        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "BriefDescription": "Page walk completed due to a demand data store to a 4K page",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x85",
-        "EventName": "ITLB_MISSES.WALK_COMPLETED",
-        "PublicDescription": "Counts completed page walks (2M and 4M page sizes) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB. The page walk can end with or without a fault.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
+        "PublicDescription": "Counts completed page walks  (4K sizes) caused by demand data stores. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0xe"
+        "UMask": "0x2"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data load to a 4K page",
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
+        "PublicDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for a store. EPT page walk duration are excluded in Skylake microarchitecture.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x2"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data load to a 2M/4M page",
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a EPT (Extended Page Table) walk for any request type.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 2M/4M pages.  The page walks can end with or without a page fault.",
+        "EventCode": "0x4f",
+        "EventName": "EPT.WALK_PENDING",
+        "PublicDescription": "Counts cycles for each PMH (Page Miss Handler) that is busy with an EPT (Extended Page Table) walk for any request type.",
         "SampleAfterValue": "2000003",
-        "UMask": "0x4"
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Load misses in all DTLB levels that cause page walks",
+        "BriefDescription": "Flushing of the Instruction TLB (ITLB) pages, includes 4k/2M/4M pages.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK",
-        "PublicDescription": "Counts demand data loads that caused a page walk of any page size (4K/2M/4M/1G). This implies it missed in all TLB levels, but the walk need not have completed.",
-        "SampleAfterValue": "100003",
+        "EventCode": "0xAE",
+        "EventName": "ITLB.ITLB_FLUSH",
+        "PublicDescription": "Counts the number of flushes of the big or small ITLB pages. Counting include both TLB Flush (covering all sets) and TLB Set Clear (set-specific).",
+        "SampleAfterValue": "100007",
         "UMask": "0x1"
     },
     {
-        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a EPT (Extended Page Table) walk for any request type.",
+        "BriefDescription": "Misses at all ITLB levels that cause page walks",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x4F",
-        "EventName": "EPT.WALK_PENDING",
-        "PublicDescription": "Counts cycles for each PMH (Page Miss Handler) that is busy with an EPT (Extended Page Table) walk for any request type.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x10"
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.MISS_CAUSES_A_WALK",
+        "PublicDescription": "Counts page walks of any page size (4K/2M/4M/1G) caused by a code fetch. This implies it missed in the ITLB and further levels of TLB, but the walk need not have completed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
     },
     {
-        "BriefDescription": "STLB flush attempts",
+        "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0xBD",
-        "EventName": "TLB_FLUSH.STLB_ANY",
-        "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",
-        "SampleAfterValue": "100007",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.STLB_HIT",
+        "SampleAfterValue": "100003",
         "UMask": "0x20"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data load to a 1G page",
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake.",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts page walks completed due to demand data loads whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
-        "SampleAfterValue": "2000003",
-        "UMask": "0x8"
+        "CounterMask": "1",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_ACTIVE",
+        "PublicDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request. EPT page walk duration are excluded in Skylake microarchitecture.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
     },
     {
-        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a load. EPT page walk duration are excluded in Skylake.",
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "CounterMask": "1",
-        "EventCode": "0x08",
-        "EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE",
-        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a load.",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED",
+        "PublicDescription": "Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x10"
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (1G)",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_1G",
+        "PublicDescription": "Counts completed page walks (1G page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
     },
     {
         "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (2M/4M)",
@@ -267,18 +237,48 @@
         "CounterHTOff": "0,1,2,3,4,5,6,7",
         "EventCode": "0x85",
         "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
-        "PublicDescription": "Counts code misses in all ITLB levels that caused a completed page walk (2M and 4M page sizes). The page walk can end with or without a fault.",
+        "PublicDescription": "Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
         "UMask": "0x4"
     },
     {
-        "BriefDescription": "Page walk completed due to a demand data store to a 1G page",
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
         "Counter": "0,1,2,3",
         "CounterHTOff": "0,1,2,3,4,5,6,7",
-        "EventCode": "0x49",
-        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_1G",
-        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 1G pages.  The page walks can end with or without a page fault.",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
+        "PublicDescription": "Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
         "SampleAfterValue": "100003",
-        "UMask": "0x8"
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts 1 per cycle for each PMH that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake.",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_PENDING",
+        "PublicDescription": "Counts 1 per cycle for each PMH (Page Miss Handler) that is busy with a page walk for an instruction fetch request. EPT page walk duration are excluded in Skylake michroarchitecture.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "DTLB flush attempts of the thread-specific entries",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xBD",
+        "EventName": "TLB_FLUSH.DTLB_THREAD",
+        "PublicDescription": "Counts the number of DTLB flush attempts of the thread-specific entries.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "STLB flush attempts",
+        "Counter": "0,1,2,3",
+        "CounterHTOff": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xBD",
+        "EventName": "TLB_FLUSH.STLB_ANY",
+        "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",
+        "SampleAfterValue": "100007",
+        "UMask": "0x20"
     }
 ]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/cache.json b/tools/perf/pmu-events/arch/x86/tigerlake/cache.json
new file mode 100644
index 000000000000..8d767b8932b0
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/cache.json
@@ -0,0 +1,595 @@
+[
+    {
+        "BriefDescription": "Counts the number of cache lines replaced in L1 data cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x51",
+        "EventName": "L1D.REPLACEMENT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts L1D data line replacements including opportunistic replacements, and replacements that require stall-for-replace or block-for-replace.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailability.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.FB_FULL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts number of cycles a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailablability.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.FB_FULL_PERIODS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts number of phases a demand request has waited due to L1D Fill Buffer (FB) unavailablability. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of cycles a demand request has waited due to L1D due to lack of L2 resources.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.L2_STALL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts number of cycles a demand request has waited due to L1D due to lack of L2 resources. Demand requests include cacheable/uncacheable demand load, store, lock or SW prefetch accesses.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of L1D misses that are outstanding",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts number of L1D misses that are outstanding in each cycle, that is each cycle the number of Fill Buffers (FB) outstanding required by Demand Reads. FB either is held by demand loads, or it is held by non-demand loads and gets hit at least once by demand. The valid outstanding interval is defined until the FB deallocation by one of the following ways: from FB allocation, if FB is allocated by demand from the demand Hit FB, if it is allocated by hardware or software prefetch. Note: In the L1D, a Demand Read contains cacheable or noncacheable demand loads, including ones causing cache-line splits and reads due to page walks resulted from any request type.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with L1D load Misses outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x48",
+        "EventName": "L1D_PEND_MISS.PENDING_CYCLES",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts duration of L1D miss outstanding in cycles.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "L2 cache lines filling L2",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xf1",
+        "EventName": "L2_LINES_IN.ALL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of L2 cache lines filling the L2. Counting does not cover rejects.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1f"
+    },
+    {
+        "BriefDescription": "Modified cache lines that are evicted by L2 cache when triggered by an L2 cache fill.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xf2",
+        "EventName": "L2_LINES_OUT.NON_SILENT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of lines that are evicted by L2 cache when triggered by an L2 cache fill. Those lines are in Modified state. Modified lines are written back to L3",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Non-modified cache lines that are silently dropped by L2 cache when triggered by an L2 cache fill.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xf2",
+        "EventName": "L2_LINES_OUT.SILENT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of lines that are silently dropped by L2 cache when triggered by an L2 cache fill. These lines are typically in Shared or Exclusive state. A non-threaded event.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "L2 code requests",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_CODE_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of L2 code requests.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe4"
+    },
+    {
+        "BriefDescription": "RFO requests to L2 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.ALL_RFO",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of RFO (read for ownership) requests to L2 cache. L2 RFO requests include both L1D demand RFO misses as well as L1D RFO prefetches.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xe2"
+    },
+    {
+        "BriefDescription": "L2 cache hits when fetching instructions, code reads.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts L2 cache hits when fetching instructions, code reads.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc4"
+    },
+    {
+        "BriefDescription": "L2 cache misses when fetching instructions",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.CODE_RD_MISS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts L2 cache misses when fetching instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x24"
+    },
+    {
+        "BriefDescription": "All requests that miss L2 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.MISS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts all requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x3f"
+    },
+    {
+        "BriefDescription": "RFO requests that hit L2 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that hit L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc2"
+    },
+    {
+        "BriefDescription": "RFO requests that miss L2 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.RFO_MISS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the RFO (Read-for-Ownership) requests that miss L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x22"
+    },
+    {
+        "BriefDescription": "SW prefetch requests that hit L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.SWPF_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts Software prefetch requests that hit the L2 cache. This event accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0xc8"
+    },
+    {
+        "BriefDescription": "SW prefetch requests that miss L2 cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x24",
+        "EventName": "L2_RQSTS.SWPF_MISS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts Software prefetch requests that miss the L2 cache. This event accounts for PREFETCHNTA and PREFETCHT0/1/2 instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x28"
+    },
+    {
+        "BriefDescription": "L2 writebacks that access L2 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xf0",
+        "EventName": "L2_TRANS.L2_WB",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts L2 writebacks that access L2 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Cycles when L1D is locked",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x63",
+        "EventName": "LOCK_CYCLES.CACHE_LOCK_DURATION",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "This event counts the number of cycles when the L1D is locked. It is a superset of the 0x1 mask (BUS_LOCK_CLOCKS.BUS_LOCK_DURATION).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "All retired load instructions.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.ALL_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts all retired load instructions. This event accounts for SW prefetch instructions for loads.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x81"
+    },
+    {
+        "BriefDescription": "All retired store instructions.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.ALL_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts all retired store instructions. This event account for SW prefetch instructions and PREFETCHW instruction for stores.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x82"
+    },
+    {
+        "BriefDescription": "Retired load instructions with locked access.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.LOCK_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with locked access.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x21"
+    },
+    {
+        "BriefDescription": "Retired load instructions that split across a cacheline boundary.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions that split across a cacheline boundary.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x41"
+    },
+    {
+        "BriefDescription": "Retired store instructions that split across a cacheline boundary.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.SPLIT_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired store instructions that split across a cacheline boundary.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x42"
+    },
+    {
+        "BriefDescription": "Retired load instructions that miss the STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_LOADS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions that true miss the STLB.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x11"
+    },
+    {
+        "BriefDescription": "Retired store instructions that miss the STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd0",
+        "EventName": "MEM_INST_RETIRED.STLB_MISS_STORES",
+        "L1_Hit_Indication": "1",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired store instructions that true miss the STLB.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x12"
+    },
+    {
+        "BriefDescription": "TBD",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_FWD",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "20011",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the retired load instructions whose data sources were L3 hit and cross-core snoop missed in on-pkg core cache.",
+        "SampleAfterValue": "20011",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired load instructions whose data sources were hits in L3 without snoops required",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NONE",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions whose data sources were hits in L3 without snoops required.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "TBD",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd2",
+        "EventName": "MEM_LOAD_L3_HIT_RETIRED.XSNP_NO_FWD",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "20011",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of completed demand load requests that missed the L1, but hit the FB(fill buffer), because a preceding miss to the same cacheline initiated the line to be brought into L1, but data is not yet ready in L1.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.FB_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with at least one uop was load missed in L1 but hit FB (Fill Buffers) due to preceding miss to the same cache line with data not ready.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Retired load instructions with L1 cache hits as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L1_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L1 data cache. This event includes all SW prefetches and lock instructions regardless of the data source.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired load instructions missed L1 cache as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L1_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L1 cache.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Retired load instructions with L2 cache hits as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L2_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with L2 cache hits as data sources.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired load instructions missed L2 cache as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L2_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions missed L2 cache as data sources.",
+        "SampleAfterValue": "100021",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Retired load instructions with L3 cache hits as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L3_HIT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with at least one uop that hit in the L3 cache.",
+        "SampleAfterValue": "100021",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Retired load instructions missed L3 cache as data sources",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "Data_LA": "1",
+        "EventCode": "0xd1",
+        "EventName": "MEM_LOAD_RETIRED.L3_MISS",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts retired load instructions with at least one uop that missed in the L3 cache.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Demand and prefetch data reads",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xb0",
+        "EventName": "OFFCORE_REQUESTS.ALL_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the demand and prefetch data reads. All Core Data Reads include cacheable 'Demands' and L2 prefetchers (not L3 prefetchers). Counting also covers reads due to page walks resulted from any request type.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Any memory transaction that reached the SQ.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xb0",
+        "EventName": "OFFCORE_REQUESTS.ALL_REQUESTS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts memory transactions reached the super queue including requests initiated by the core, all L3 prefetches, page walks, etc..",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests sent to uncore",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xb0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the Demand Data Read requests sent to uncore. Use it in conjunction with OFFCORE_REQUESTS_OUTSTANDING to determine average latency in the uncore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Demand RFO requests including regular RFOs, locks, ItoM",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xb0",
+        "EventName": "OFFCORE_REQUESTS.DEMAND_RFO",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the demand RFO (read for ownership) requests including regular RFOs, locks, ItoM.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Offcore outstanding cacheable Core Data Read transactions in SuperQueue (SQ), queue to uncore",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.ALL_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of offcore outstanding cacheable Core Data Read transactions in the super queue every cycle. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles when offcore outstanding cacheable Core Data Read transactions are present in SuperQueue (SQ), queue to uncore.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles when offcore outstanding cacheable Core Data Read transactions are present in the super queue. A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation). See corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles when offcore outstanding Demand Data Read transactions are present in SuperQueue (SQ), queue to uncore",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles when offcore outstanding Demand Data Read transactions are present in the super queue (SQ). A transaction is considered to be in the Offcore outstanding state between L2 miss and transaction completion sent to requestor (SQ de-allocation).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with offcore outstanding demand rfo reads transactions in SuperQueue (SQ), queue to uncore.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.CYCLES_WITH_DEMAND_RFO",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of offcore outstanding demand rfo Reads transactions in the super queue every cycle. The 'Offcore outstanding' state of the transaction lasts from the L2 miss until the sending transaction completion to requestor (SQ deallocation). See the corresponding Umask under OFFCORE_REQUESTS.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Demand Data Read transactions pending for off-core. Highly correlated.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of off-core outstanding Demand Data Read transactions every cycle. A transaction is considered to be in the Off-core outstanding state between L2 cache miss and data-return to the core.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles with at least 6 offcore outstanding Demand Data Read transactions in uncore queue.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "6",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_DATA_RD_GE_6",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Store Read transactions pending for off-core. Highly correlated.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x60",
+        "EventName": "OFFCORE_REQUESTS_OUTSTANDING.DEMAND_RFO",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of off-core outstanding read-for-ownership (RFO) store transactions every cycle. An RFO transaction is considered to be in the Off-core outstanding state between L2 cache miss and transaction completion.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles the superQ cannot take any more entries.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xf4",
+        "EventName": "SQ_MISC.SQ_FULL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the cycles for which the thread is active and the superQ cannot take any more entries.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json b/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json
new file mode 100644
index 000000000000..402f01851313
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/floating-point.json
@@ -0,0 +1,94 @@
+[
+    {
+        "BriefDescription": "Counts all microcode FP assists.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc1",
+        "EventName": "ASSISTS.FP",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts all microcode Floating Point assists.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational 128-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 2 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB MUL DIV MIN MAX RCP14 RSQRT14 SQRT DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts number of SSE/AVX computational 128-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 4 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational 256-bit packed single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed single precision floating-point instructions: ADD SUB HADD HSUB SUBADD MUL DIV MIN MAX SQRT RSQRT RCP DPP FM(N)ADD/SUB.  DPP and FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 8 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational 512-bit packed double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 16 computation operations, one for each element.  Applies to SSE* and AVX* packed double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT14 RCP14 FM(N)ADD/SUB. FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational scalar double precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar double precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_DOUBLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts number of SSE/AVX computational scalar single precision floating-point instructions retired; some instructions will count twice as noted below.  Each count represents 1 computational operation. Applies to SSE* and AVX* scalar single precision floating-point instructions: ADD SUB MUL DIV MIN MAX SQRT RSQRT RCP FM(N)ADD/SUB.  FM(N)ADD/SUB instructions count twice as they perform 2 calculations per element.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc7",
+        "EventName": "FP_ARITH_INST_RETIRED.SCALAR_SINGLE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json b/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json
new file mode 100644
index 000000000000..24c736ac8f8e
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/frontend.json
@@ -0,0 +1,463 @@
+[
+    {
+        "BriefDescription": "Counts the total number when the front end is resteered, mainly when the BPU cannot provide a correct prediction and this is corrected by other branch handling mechanisms at the front end.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xe6",
+        "EventName": "BACLEARS.ANY",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times the front-end is resteered when it finds a branch instruction in a fetch line. This occurs for the first time a branch instruction is fetched or when the branch is not tracked by the BPU (Branch Prediction Unit) anymore.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Decode Stream Buffer (DSB)-to-MITE transitions count.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0xab",
+        "EventName": "DSB2MITE_SWITCHES.COUNT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of Decode Stream Buffer (DSB a.k.a. Uop Cache)-to-MITE speculative transitions.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "DSB-to-MITE switch true penalty cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xab",
+        "EventName": "DSB2MITE_SWITCHES.PENALTY_CYCLES",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Decode Stream Buffer (DSB) is a Uop-cache that holds translations of previously fetched instructions that were decoded by the legacy x86 decode pipeline (MITE). This event counts fetch penalty cycles when a transition occurs from DSB to MITE.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced DSB miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.DSB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x11",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired Instructions that experienced DSB (Decode stream buffer i.e. the decoded instruction-cache) miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced iTLB true miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.ITLB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x14",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired Instructions that experienced iTLB (Instruction TLB) true miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced Instruction L1 Cache true miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.L1I_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x12",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired Instructions who experienced Instruction L1 Cache true miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced Instruction L2 Cache true miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.L2_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x13",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired Instructions who experienced Instruction L2 Cache true miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions after front-end starvation of at least 1 cycle",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x500106",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 1 cycle which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_128",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x508006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 128 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 16 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_16",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x501006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 16 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions after front-end starvation of at least 2 cycles",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x500206",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of at least 2 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_256",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x510006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 256 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end had at least 1 bubble-slot for a period of 2 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_2_BUBBLES_GE_1",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x100206",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after the front-end had at least 1 bubble-slot for a period of 2 cycles. A bubble-slot is an empty issue-pipeline slot while there was no RAT stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 32 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_32",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x502006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 32 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_4",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x500406",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 4 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_512",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x520006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 512 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_64",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x504006",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 64 cycles which was not interrupted by a back-end stall.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired instructions that are fetched after an interval where the front-end delivered no uops for a period of 8 cycles which was not interrupted by a back-end stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.LATENCY_GE_8",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x500806",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired instructions that are delivered to the back-end after a front-end stall of at least 8 cycles. During this period the front-end delivered no uops.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Retired Instructions who experienced STLB (2nd level TLB) true miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc6",
+        "EventName": "FRONTEND_RETIRED.STLB_MISS",
+        "MSRIndex": "0x3F7",
+        "MSRValue": "0x15",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired Instructions that experienced STLB (2nd level TLB) true miss.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x80",
+        "EventName": "ICACHE_16B.IFDATA_STALL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles where a code line fetch is stalled due to an L1 instruction cache miss. The legacy decode pipeline works at a 16 Byte granularity.",
+        "SampleAfterValue": "500009",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts instruction fetch tag lookups that hit in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_MISS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts instruction fetch tag lookups that miss in the instruction cache (L1I). Counts at 64-byte cache-line granularity. Accounts for both cacheable and uncacheable accesses.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x83",
+        "EventName": "ICACHE_64B.IFTAG_STALL",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles where a code fetch is stalled due to L1 instruction cache tag miss.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles Decode Stream Buffer (DSB) is delivering any Uop",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_CYCLES_ANY",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles uops were delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles DSB is delivering optimal number of Uops",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "5",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_CYCLES_OK",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x79",
+        "EventName": "IDQ.DSB_UOPS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the Decode Stream Buffer (DSB) path.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles MITE is delivering any Uop",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_CYCLES_ANY",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles uops were delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles MITE is delivering optimal number of Uops",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "5",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_CYCLES_OK",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of cycles where optimal number of uops was delivered to the Instruction Decode Queue (IDQ) from the MITE (legacy decode pipeline) path. During these cycles uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Uops delivered to Instruction Decode Queue (IDQ) from MITE path",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MITE_UOPS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of uops delivered to Instruction Decode Queue (IDQ) from the MITE path. This also means that uops are not being delivered from the Decode Stream Buffer (DSB).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles when uops are being delivered to IDQ while MS is busy",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_CYCLES_ANY",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles during which uops are being delivered to Instruction Decode Queue (IDQ) while the Microcode Sequencer (MS) is busy. Uops maybe initiated by Decode Stream Buffer (DSB) or MITE.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Number of switches from DSB or MITE to the MS",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_SWITCHES",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Number of switches from DSB (Decode Stream Buffer) or MITE (legacy decode pipeline) to the Microcode Sequencer.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Uops delivered to IDQ while MS is busy",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x79",
+        "EventName": "IDQ.MS_UOPS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the total number of uops delivered by the Microcode Sequencer (MS). Any instruction over 4 uops will be delivered by the MS. Some instructions such as transcendentals may additionally generate uops from the MS.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x30"
+    },
+    {
+        "BriefDescription": "Uops not delivered by IDQ when backend of the machine is not stalled",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x9c",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CORE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of uops not delivered to by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when no uops are not delivered by the IDQ when backend of the machine is not stalled",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "5",
+        "EventCode": "0x9c",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_0_UOPS_DELIV.CORE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of cycles when no uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when optimal number of uops was delivered to the back-end when the back-end is not stalled",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x9c",
+        "EventName": "IDQ_UOPS_NOT_DELIVERED.CYCLES_FE_WAS_OK",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of cycles when the optimal number of uops were delivered by the Instruction Decode Queue (IDQ) to the back-end of the pipeline when there was no back-end stalls. This event counts for one SMT thread in a given cycle.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/memory.json b/tools/perf/pmu-events/arch/x86/tigerlake/memory.json
new file mode 100644
index 000000000000..0948de0b160c
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/memory.json
@@ -0,0 +1,295 @@
+[
+    {
+        "BriefDescription": "Execution stalls while L3 cache miss demand load is outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "6",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L3_MISS",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x6"
+    },
+    {
+        "BriefDescription": "Number of machine clears due to memory ordering conflicts.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.MEMORY_ORDERING",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of Machine Clears detected dye to memory ordering. Memory Ordering Machine Clears may apply when a memory read may not conform to the memory ordering rules of the x86 architecture",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_128",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x80",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 128 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "1009",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_16",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x10",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 16 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "20011",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_256",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x100",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 256 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "503",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_32",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x20",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 32 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "100007",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_4",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x4",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 4 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "100003",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_512",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x200",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 512 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "101",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_64",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x40",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 64 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "2003",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "Data_LA": "1",
+        "EventCode": "0xcd",
+        "EventName": "MEM_TRANS_RETIRED.LOAD_LATENCY_GT_8",
+        "MSRIndex": "0x3F6",
+        "MSRValue": "0x8",
+        "PEBS": "2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts randomly selected loads when the latency from first dispatch to completion is greater than 8 cycles.  Reported latency may be longer than just the memory latency.",
+        "SampleAfterValue": "50021",
+        "TakenAlone": "1",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Demand Data Read requests who miss L3 cache",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xb0",
+        "EventName": "OFFCORE_REQUESTS.L3_MISS_DEMAND_DATA_RD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Demand Data Read requests who miss L3 cache.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.ABORTED",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times RTM abort was triggered.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.ABORTED_EVENTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times an RTM execution aborted due to none of the previous 4 categories (e.g. interrupt).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.ABORTED_MEM",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times an RTM execution aborted due to various memory events (e.g. read/write capacity and conflicts).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to incompatible memory type",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.ABORTED_MEMTYPE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times an RTM execution aborted due to incompatible memory type.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution aborted due to HLE-unfriendly instructions",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.ABORTED_UNFRIENDLY",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times an RTM execution aborted due to HLE-unfriendly instructions.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution successfully committed",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.COMMIT",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times RTM commit succeeded.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an RTM execution started.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc9",
+        "EventName": "RTM_RETIRED.START",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of times we entered an RTM region. Does not count nested transactions.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of times a class of instructions that may cause a transactional abort was executed inside a transactional region",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts Unfriendly TSX abort triggered by a vzeroupper instruction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times an instruction execution caused the transactional nest count supported to be exceeded",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5d",
+        "EventName": "TX_EXEC.MISC3",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts Unfriendly TSX abort triggered by a nest count that is too deep.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional reads",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CAPACITY_READ",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional reads",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Speculatively counts the number of TSX aborts due to a data capacity limitation for transactional writes.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CAPACITY_WRITE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Speculatively counts the number of Transactional Synchronization Extensions (TSX) aborts due to a data capacity limitation for transactional writes.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of times a transactional abort was signaled due to a data conflict on a transactionally accessed address",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x54",
+        "EventName": "TX_MEM.ABORT_CONFLICT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times a TSX line had a cache conflict.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/other.json b/tools/perf/pmu-events/arch/x86/tigerlake/other.json
new file mode 100644
index 000000000000..b1143fe74246
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/other.json
@@ -0,0 +1,189 @@
+[
+    {
+        "BriefDescription": "Number of occurrences where a microcode assist is invoked by hardware.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc1",
+        "EventName": "ASSISTS.ANY",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of occurrences where a microcode assist is invoked by hardware Examples include AD (page Access Dirty), FP and AVX related assists.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x7"
+    },
+    {
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the Non-AVX turbo schedule.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL0_TURBO_LICENSE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts Core cycles where the core was running with power-delivery for baseline license level 0.  This includes non-AVX codes, SSE, AVX 128-bit, and low-current AVX 256-bit codes.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x7"
+    },
+    {
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX2 turbo schedule.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL1_TURBO_LICENSE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts Core cycles where the core was running with power-delivery for license level 1.  This includes high current AVX 256-bit instructions as well as low current AVX 512-bit instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x18"
+    },
+    {
+        "BriefDescription": "Core cycles where the core was running in a manner where Turbo may be clipped to the AVX512 turbo schedule.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x28",
+        "EventName": "CORE_POWER.LVL2_TURBO_LICENSE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Core cycles where the core was running with power-delivery for license level 2 (introduced in Skylake Server microarchtecture).  This includes high current AVX 512-bit instructions.",
+        "SampleAfterValue": "200003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Counts demand data reads that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10003C0001",
+        "Offcore": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.DEMAND_DATA_RD.L3_HIT.SNOOP_HIT_WITH_FWD",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x8003C0001",
+        "Offcore": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts demand reads for ownership (RFO) requests and software prefetches for exclusive ownership (PREFETCHW) that hit a cacheline in the L3 where a snoop hit in another cores caches, data forwarding is required as the data is modified.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.DEMAND_RFO.L3_HIT.SNOOP_HITM",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10003C0002",
+        "Offcore": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts streaming stores that have any type of response.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xB7, 0xBB",
+        "EventName": "OCR.STREAMING_WR.ANY_RESPONSE",
+        "MSRIndex": "0x1a6,0x1a7",
+        "MSRValue": "0x10800",
+        "Offcore": "1",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Offcore response can be programmed only with a specific pair of event select and counter MSR, and with specific event codes and predefine mask bit value in a dedicated MSR to specify attributes of the offcore transaction.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHNTA instructions executed.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.NTA",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of PREFETCHNTA instructions executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHW instructions executed.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.PREFETCHW",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of PREFETCHW instructions executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHT0 instructions executed.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T0",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of PREFETCHT0 instructions executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of PREFETCHT1 or PREFETCHT2 instructions executed.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x32",
+        "EventName": "SW_PREFETCH_ACCESS.T1_T2",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of PREFETCHT1 or PREFETCHT2 instructions executed.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "TMA slots where no uops were being issued due to lack of back-end resources.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa4",
+        "EventName": "TOPDOWN.BACKEND_BOUND_SLOTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of Top-down Microarchitecture Analysis (TMA) method's  slots where no micro-operations were being issued from front-end to back-end of the machine due to lack of back-end resources.",
+        "SampleAfterValue": "10000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "TMA slots wasted due to incorrect speculation by branch mispredictions",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa4",
+        "EventName": "TOPDOWN.BR_MISPREDICT_SLOTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Number of TMA slots that were wasted due to incorrect speculation by branch mispredictions. This event estimates number of operations that were issued but not retired from the specualtive path as well as the out-of-order engine recovery past a branch misprediction.",
+        "SampleAfterValue": "10000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "TMA slots available for an unhalted logical processor. Fixed counter - architectural event",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 3",
+        "EventName": "TOPDOWN.SLOTS",
+        "PEBScounters": "35",
+        "PublicDescription": "Number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method (TMA). The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core. Software can use this event as the denominator for the top-level metrics of the TMA method. This architectural event is counted on a designated fixed counter (Fixed Counter 3).",
+        "SampleAfterValue": "10000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "TMA slots available for an unhalted logical processor. General counter - architectural event",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa4",
+        "EventName": "TOPDOWN.SLOTS_P",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of available slots for an unhalted logical processor. The event increments by machine-width of the narrowest pipeline as employed by the Top-down Microarchitecture Analysis method. The count is distributed among unhalted logical processors (hyper-threads) who share the same physical core.",
+        "SampleAfterValue": "10000003",
+        "UMask": "0x1"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json
new file mode 100644
index 000000000000..d0d8a09bc470
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/pipeline.json
@@ -0,0 +1,982 @@
+[
+    {
+        "BriefDescription": "Cycles when divide unit is busy executing divide or square root operations.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x14",
+        "EventName": "ARITH.DIVIDER_ACTIVE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when divide unit is busy executing divide or square root operations. Accounts for integer and floating-point operations.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x9"
+    },
+    {
+        "BriefDescription": "All branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.ALL_BRANCHES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts all branch instructions retired.",
+        "SampleAfterValue": "400009"
+    },
+    {
+        "BriefDescription": "Conditional branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.COND",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x11"
+    },
+    {
+        "BriefDescription": "Not taken branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.COND_NTAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts not taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Taken conditional branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.COND_TAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts taken conditional branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Far branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.FAR_BRANCH",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts far branch instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "All indirect branch instructions retired (excluding RETs. TSX aborts are considered indirect branch).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.INDIRECT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts all indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Direct and indirect near call instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.NEAR_CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts both direct and indirect near call instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Return instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.NEAR_RETURN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts return instructions retired.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Taken branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc4",
+        "EventName": "BR_INST_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts taken branch instructions retired.",
+        "SampleAfterValue": "400009",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "All mispredicted branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.ALL_BRANCHES",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts all the retired branch instructions that were mispredicted by the processor. A branch misprediction occurs when the processor incorrectly predicts the destination of the branch.  When the misprediction is discovered at execution, all the instructions executed in the wrong (speculative) path must be discarded, and the processor must start fetching from the correct path.",
+        "SampleAfterValue": "50021"
+    },
+    {
+        "BriefDescription": "Mispredicted conditional branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.COND",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts mispredicted conditional branch instructions retired.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x11"
+    },
+    {
+        "BriefDescription": "Mispredicted non-taken conditional branch instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.COND_NTAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of conditional branch instructions retired that were mispredicted and the branch direction was not taken.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "number of branch instructions retired that were mispredicted and taken. Non PEBS",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.COND_TAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts taken conditional mispredicted branch instructions retired.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "All miss-predicted indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.INDIRECT",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts all miss-predicted indirect branch instructions retired (excluding RETs. TSX aborts is considered indirect branch).",
+        "SampleAfterValue": "50021",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Mispredicted indirect CALL instructions retired.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.INDIRECT_CALL",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts retired mispredicted indirect (near taken) CALL instructions, including both register and memory indirect.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of near branch instructions retired that were mispredicted and taken.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc5",
+        "EventName": "BR_MISP_RETIRED.NEAR_TAKEN",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts number of near branch instructions retired that were mispredicted and taken.",
+        "SampleAfterValue": "50021",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycle counts are evenly distributed between active threads in the Core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xec",
+        "EventName": "CPU_CLK_UNHALTED.DISTRIBUTED",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "This event distributes cycle counts between active hyperthreads, i.e., those in C0.  A hyperthread becomes inactive when it executes the HLT or MWAIT instructions.  If all other hyperthreads are inactive (or disabled or do not exist), all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Core crystal clock cycles when this thread is unhalted and the other thread is halted.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts Core crystal clock cycles when current thread is unhalted and the other thread is halted.",
+        "SampleAfterValue": "25003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Core crystal clock cycles. Cycle counts are evenly distributed between active threads in the Core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.REF_DISTRIBUTED",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "This event distributes Core crystal clock cycle counts between active hyperthreads, i.e., those in C0 sleep-state. A hyperthread becomes inactive when it executes the HLT or MWAIT instructions. If one thread is active in a core, all counts are attributed to this hyperthread. To obtain the full count when the Core is active, sum the counts from each hyperthread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Reference cycles when the core is not in halt state.",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 2",
+        "EventName": "CPU_CLK_UNHALTED.REF_TSC",
+        "PEBScounters": "34",
+        "PublicDescription": "Counts the number of reference cycles when the core is not in a halt state. The core enters the halt state when it is running the HLT instruction or the MWAIT instruction. This event is not affected by core frequency changes (for example, P states, TM2 transitions) but has the same incrementing frequency as the time stamp counter. This event can approximate elapsed time while the core was not in a halt state. This event has a constant ratio with the CPU_CLK_UNHALTED.REF_XCLK event. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events. Note: On all current platforms this event stops counting during 'throttling (TM)' states duty off periods the processor is 'halted'.  The counter update is done at a lower clock rate then the core clock the overflow status bit for this counter may appear 'sticky'.  After the counter has overflowed and software clears the overflow status bit and resets the counter to less than MAX. The reset value to the counter is not clocked immediately so the overflow status bit will flip 'high (1)' and generate another PMI (if enabled) after which the reset value gets clocked into the counter. Therefore, software will get the interrupt, read the overflow status bit '1 for bit 34 while the counter value is less than MAX. Software should ignore this case.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Core crystal clock cycles when the thread is unhalted.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.REF_XCLK",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts core crystal clock cycles when the thread is unhalted.",
+        "SampleAfterValue": "25003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Core cycles when the thread is not in halt state",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 1",
+        "EventName": "CPU_CLK_UNHALTED.THREAD",
+        "PEBScounters": "33",
+        "PublicDescription": "Counts the number of core cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. This event is a component in many key event ratios. The core frequency may change from time to time due to transitions associated with Enhanced Intel SpeedStep Technology or TM2. For this reason this event may have a changing ratio with regards to time. When the core frequency is constant, this event can approximate elapsed time while the core was not in the halt state. It is counted on a dedicated fixed counter, leaving the eight programmable counters available for other events.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Thread cycles when thread is not in halt state",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x3c",
+        "EventName": "CPU_CLK_UNHALTED.THREAD_P",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "This is an architectural event that counts the number of thread cycles while the thread is not in a halt state. The thread enters the halt state when it is running the HLT instruction. The core frequency may change from time to time due to power or thermal throttling. For this reason, this event may have a changing ratio with regards to wall clock time.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Cycles while L1 cache miss demand load is outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "8",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L1D_MISS",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles while L2 cache miss demand load is outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_L2_MISS",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles while memory subsystem has an outstanding load.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "16",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.CYCLES_MEM_ANY",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Execution stalls while L1 cache miss demand load is outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "12",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L1D_MISS",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0xc"
+    },
+    {
+        "BriefDescription": "Execution stalls while L2 cache miss demand load is outstanding.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "5",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_L2_MISS",
+        "PEBScounters": "0,1,2,3",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x5"
+    },
+    {
+        "BriefDescription": "Execution stalls while memory subsystem has an outstanding load.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "20",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_MEM_ANY",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x14"
+    },
+    {
+        "BriefDescription": "Total execution stalls.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0xa3",
+        "EventName": "CYCLE_ACTIVITY.STALLS_TOTAL",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles total of 1 uop is executed on all ports and Reservation Station was not empty.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.1_PORTS_UTIL",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which a total of 1 uop was executed on all ports and Reservation Station (RS) was not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles total of 2 uops are executed on all ports and Reservation Station was not empty.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.2_PORTS_UTIL",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which a total of 2 uops were executed on all ports and Reservation Station (RS) was not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station was not empty.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.3_PORTS_UTIL",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles total of 3 uops are executed on all ports and Reservation Station (RS) was not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station was not empty.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.4_PORTS_UTIL",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles total of 4 uops are executed on all ports and Reservation Station (RS) was not empty.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Cycles when the memory subsystem has an outstanding load. Increments by 4 for every such cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "5",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.BOUND_ON_LOADS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when the memory subsystem has an outstanding load. Increments by 4 for every such cycle.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x21"
+    },
+    {
+        "BriefDescription": "Cycles where the Store Buffer was full and no loads caused an execution stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.BOUND_ON_STORES",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles where the Store Buffer was full and no loads caused an execution stall.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Cycles where no uops were executed, the Reservation Station was not empty, the Store Buffer was full and there was no outstanding load.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa6",
+        "EventName": "EXE_ACTIVITY.EXE_BOUND_0_PORTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which no uops were executed on all ports and Reservation Station (RS) was not empty.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Stalls caused by changing prefix length of the instruction.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x87",
+        "EventName": "ILD_STALL.LCP",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles that the Instruction Length decoder (ILD) stalls occurred due to dynamically changing prefix length of the decoded instruction (by operand size prefix instruction 0x66, address size prefix instruction 0x67 or REX.W for Intel64). Count is proportional to the number of prefixes in a 16B-line. This may result in a three-cycle penalty for each LCP (Length changing prefix) in a 16-byte chunk.",
+        "SampleAfterValue": "500009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of instructions retired. Fixed Counter - architectural event",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 0",
+        "EventName": "INST_RETIRED.ANY",
+        "PEBS": "1",
+        "PEBScounters": "32",
+        "PublicDescription": "Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of instructions retired. General Counter - architectural event",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc0",
+        "EventName": "INST_RETIRED.ANY_P",
+        "PEBS": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of X86 instructions retired - an Architectural PerfMon event. Counting continues during hardware interrupts, traps, and inside interrupt handlers. Notes: INST_RETIRED.ANY is counted by a designated fixed counter freeing up programmable counters to count other events. INST_RETIRED.ANY_P is counted by a programmable counter.",
+        "SampleAfterValue": "2000003"
+    },
+    {
+        "BriefDescription": "Precise instruction retired event with a reduced effect of PEBS shadow in IP distribution",
+        "CollectPEBSRecord": "2",
+        "Counter": "Fixed counter 0",
+        "EventName": "INST_RETIRED.PREC_DIST",
+        "PEBS": "1",
+        "PEBScounters": "32",
+        "PublicDescription": "A version of INST_RETIRED that allows for a more unbiased distribution of samples across instructions retired. It utilizes the Precise Distribution of Instructions Retired (PDIR) feature to mitigate some bias in how retired instructions get sampled. Use on Fixed Counter 0.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles the Backend cluster is recovering after a miss-speculation or a Store Buffer or Load Buffer drain stall.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x0d",
+        "EventName": "INT_MISC.ALL_RECOVERY_CYCLES",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles the Backend cluster is recovering after a miss-speculation or a Store Buffer or Load Buffer drain stall.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x3"
+    },
+    {
+        "BriefDescription": "Counts cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0d",
+        "EventName": "INT_MISC.CLEAR_RESTEER_CYCLES",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles after recovery from a branch misprediction or machine clear till the first uop is issued from the resteered path.",
+        "SampleAfterValue": "500009",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Core cycles the allocator was stalled due to recovery from earlier clear event for this thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0d",
+        "EventName": "INT_MISC.RECOVERY_CYCLES",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts core cycles when the Resource allocator was stalled due to recovery from an earlier branch misprediction or machine clear event.",
+        "SampleAfterValue": "500009",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "TMA slots where uops got dropped",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0d",
+        "EventName": "INT_MISC.UOP_DROPPING",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Estimated number of Top-down Microarchitecture Analysis slots that got dropped due to non front-end reasons",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "The number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.NO_SR",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times that split load operations are temporarily blocked because all resources for handling the split accesses are in use.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Loads blocked due to overlapping with a preceding store that cannot be forwarded.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x03",
+        "EventName": "LD_BLOCKS.STORE_FORWARD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times where store forwarding was prevented for a load operation. The most common case is a load blocked due to the address of memory access (partially) overlapping with a preceding uncompleted store. Note: See the table of not supported store forwards in the Optimization Guide.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "False dependencies in MOB due to partial compare on address.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x07",
+        "EventName": "LD_BLOCKS_PARTIAL.ADDRESS_ALIAS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of times a load got blocked due to false dependencies in MOB due to partial compare on address.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of demand load dispatches that hit L1D fill buffer (FB) allocated for software prefetch.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x4c",
+        "EventName": "LOAD_HIT_PREFETCH.SWPF",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts all not software-prefetch load dispatches that hit the fill buffer (FB) allocated for the software prefetch. It can also be incremented by some lock instructions. So it should only be used with profiling so that the locks can be excluded by ASM (Assembly File) inspection of the nearby instructions.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles Uops delivered by the LSD, but didn't come from the decoder.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0xa8",
+        "EventName": "LSD.CYCLES_ACTIVE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the cycles when at least one uop is delivered by the LSD (Loop-stream detector).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles optimal number of Uops delivered by the LSD, but did not come from the decoder.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "5",
+        "EventCode": "0xa8",
+        "EventName": "LSD.CYCLES_OK",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the cycles when optimal number of uops is delivered by the LSD (Loop-stream detector).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of Uops delivered by the LSD.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xa8",
+        "EventName": "LSD.UOPS",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of uops delivered to the back-end by the LSD(Loop Stream Detector).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of machine clears (nukes) of any type.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.COUNT",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of machine clears (nukes) of any type.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Self-modifying code (SMC) detected.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc3",
+        "EventName": "MACHINE_CLEARS.SMC",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts self-modifying code (SMC) detected, which causes a machine clear.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Increments whenever there is an update to the LBR array.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xcc",
+        "EventName": "MISC_RETIRED.LBR_INSERTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Increments when an entry is added to the Last Branch Record (LBR) array (or removed from the array in case of RETURNs in call stack mode). The event requires LBR enable via IA32_DEBUGCTL MSR and branch type selection via MSR_LBR_SELECT.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of retired PAUSE instructions. This event is not supported on first SKL and KBL products.",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xcc",
+        "EventName": "MISC_RETIRED.PAUSE_INST",
+        "PublicDescription": "Counts number of retired PAUSE instructions. This event is not supported on first SKL and KBL products.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Cycles stalled due to no store buffers available. (not including draining form sync).",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa2",
+        "EventName": "RESOURCE_STALLS.SB",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts allocation stall cycles caused by the store buffer (SB) being full. This counts cycles that the pipeline back-end blocked uop delivery from the front-end.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x8"
+    },
+    {
+        "BriefDescription": "Counts cycles where the pipeline is stalled due to serializing operations.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa2",
+        "EventName": "RESOURCE_STALLS.SCOREBOARD",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles when Reservation Station (RS) is empty for the thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x5e",
+        "EventName": "RS_EVENTS.EMPTY_CYCLES",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which the reservation station (RS) is empty for this logical processor. This is usually caused when the front-end pipeline runs into stravation periods (e.g. branch mispredictions or i-cache misses)",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts end of periods where the Reservation Station (RS) was empty.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EdgeDetect": "1",
+        "EventCode": "0x5e",
+        "EventName": "RS_EVENTS.EMPTY_END",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts end of periods where the Reservation Station (RS) was empty. Could be useful to closely sample on front-end latency issues (see the FRONTEND_RETIRED event of designated precise events)",
+        "SampleAfterValue": "100003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 0",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_0",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 0.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 1",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 1.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 2 and 3",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_2_3",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 2 and 3.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 4 and 9",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_4_9",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 5 and 9.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 5",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_5",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 5.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 6",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_6",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to port 6.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x40"
+    },
+    {
+        "BriefDescription": "Number of uops executed on port 7 and 8",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xa1",
+        "EventName": "UOPS_DISPATCHED.PORT_7_8",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts, on the per-thread basis, cycles during which at least one uop is dispatched from the Reservation Station (RS) to ports 7 and 8.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x80"
+    },
+    {
+        "BriefDescription": "Number of uops executed on the core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CORE",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of uops executed from any thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 1 micro-op is executed from any thread on physical core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when at least 1 micro-op is executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 2 micro-op is executed from any thread on physical core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when at least 2 micro-ops are executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 3 micro-op is executed from any thread on physical core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "3",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_3",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when at least 3 micro-ops are executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles at least 4 micro-op is executed from any thread on physical core.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CORE_CYCLES_GE_4",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles when at least 4 micro-ops are executed from any thread on physical core.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles where at least 1 uop was executed per-thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles where at least 1 uop was executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 2 uops were executed per-thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "2",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_2",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles where at least 2 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 3 uops were executed per-thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "3",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_3",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles where at least 3 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles where at least 4 uops were executed per-thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "4",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.CYCLES_GE_4",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Cycles where at least 4 uops were executed per-thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts number of cycles no uops were dispatched to be executed on this thread.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.STALL_CYCLES",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which no uops were dispatched from the Reservation Station (RS) per thread.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of uops to be executed per-thread each cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.THREAD",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Counts the number of x87 uops dispatched.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xb1",
+        "EventName": "UOPS_EXECUTED.X87",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of x87 uops executed.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Uops that RAT issues to RS",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0e",
+        "EventName": "UOPS_ISSUED.ANY",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of uops that the Resource Allocation Table (RAT) issues to the Reservation Station (RS).",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Cycles when RAT does not issue Uops to RS for the thread",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0x0e",
+        "EventName": "UOPS_ISSUED.STALL_CYCLES",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts cycles during which the Resource Allocation Table (RAT) does not issue any Uops to the reservation station (RS) for the current thread.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "Uops inserted at issue-stage in order to preserve upper bits of vector registers.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0x0e",
+        "EventName": "UOPS_ISSUED.VECTOR_WIDTH_MISMATCH",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of Blend Uops issued by the Resource Allocation Table (RAT) to the reservation station (RS) in order to preserve upper bits of vector registers. Starting with the Skylake microarchitecture, these Blend uops are needed since every Intel SSE instruction executed in Dirty Upper State needs to preserve bits 128-255 of the destination register. For more information, refer to Mixing Intel AVX and Intel SSE Code section of the Optimization Guide.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Retirement slots used.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.SLOTS",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the retirement slots used each cycle.",
+        "SampleAfterValue": "2000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles without actually retired uops.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "1",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.STALL_CYCLES",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "This event counts cycles without actually retired uops.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Cycles with less than 10 actually retired uops.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3,4,5,6,7",
+        "CounterMask": "10",
+        "EventCode": "0xc2",
+        "EventName": "UOPS_RETIRED.TOTAL_CYCLES",
+        "Invert": "1",
+        "PEBScounters": "0,1,2,3,4,5,6,7",
+        "PublicDescription": "Counts the number of cycles using always true condition (uops_ret &amp;lt; 16) applied to non PEBS uops retired event.",
+        "SampleAfterValue": "1000003",
+        "UMask": "0x2"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/tgl-metrics.json b/tools/perf/pmu-events/arch/x86/tigerlake/tgl-metrics.json
new file mode 100644
index 000000000000..00a16f1a0f44
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/tgl-metrics.json
@@ -0,0 +1,231 @@
+[
+    {
+        "BriefDescription": "Instructions Per Cycle (per Logical Processor)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Summary",
+        "MetricName": "IPC"
+    },
+    {
+        "BriefDescription": "Instruction per taken branch",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_TAKEN",
+        "MetricGroup": "Branches;FetchBW;PGO",
+        "MetricName": "IpTB"
+    },
+    {
+        "BriefDescription": "Cycles Per Instruction (per Logical Processor)",
+        "MetricExpr": "1 / IPC",
+        "MetricGroup": "Pipeline",
+        "MetricName": "CPI"
+    },
+    {
+        "BriefDescription": "Per-Logical Processor actual clocks when the Logical Processor is active.",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "Pipeline",
+        "MetricName": "CLKS"
+    },
+    {
+        "BriefDescription": "Instructions Per Cycle (per physical core)",
+        "MetricExpr": "INST_RETIRED.ANY / CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "SMT;TmaL1",
+        "MetricName": "CoreIPC"
+    },
+    {
+        "BriefDescription": "Floating Point Operations Per Cycle",
+        "MetricExpr": "( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "Flops",
+        "MetricName": "FLOPc"
+    },
+    {
+        "BriefDescription": "Instruction-Level-Parallelism (average number of uops executed when there is at least 1 uop executed)",
+        "MetricExpr": "UOPS_EXECUTED.THREAD / ( UOPS_EXECUTED.CORE_CYCLES_GE_1 / 2 )",
+        "MetricGroup": "Pipeline;PortsUtil",
+        "MetricName": "ILP"
+    },
+    {
+        "BriefDescription": "Number of Instructions per non-speculative Branch Misprediction (JEClear)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_MISP_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "BrMispredicts",
+        "MetricName": "IpMispredict"
+    },
+    {
+        "BriefDescription": "Core actual clocks when any Logical Processor is active on the Physical Core",
+        "MetricExpr": "CPU_CLK_UNHALTED.DISTRIBUTED",
+        "MetricGroup": "SMT",
+        "MetricName": "CORE_CLKS"
+    },
+    {
+        "BriefDescription": "Instructions per Load (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_LOADS",
+        "MetricGroup": "InsType",
+        "MetricName": "IpLoad"
+    },
+    {
+        "BriefDescription": "Instructions per Store (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / MEM_INST_RETIRED.ALL_STORES",
+        "MetricGroup": "InsType",
+        "MetricName": "IpStore"
+    },
+    {
+        "BriefDescription": "Instructions per Branch (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.ALL_BRANCHES",
+        "MetricGroup": "Branches;InsType",
+        "MetricName": "IpBranch"
+    },
+    {
+        "BriefDescription": "Instructions per (near) call (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.NEAR_CALL",
+        "MetricGroup": "Branches",
+        "MetricName": "IpCall"
+    },
+    {
+        "BriefDescription": "Branch instructions per taken branch. ",
+        "MetricExpr": "BR_INST_RETIRED.ALL_BRANCHES / BR_INST_RETIRED.NEAR_TAKEN",
+        "MetricGroup": "Branches;PGO",
+        "MetricName": "BpTkBranch"
+    },
+    {
+        "BriefDescription": "Instructions per Floating Point (FP) Operation (lower number means higher occurrence rate)",
+        "MetricExpr": "INST_RETIRED.ANY / ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE )",
+        "MetricGroup": "Flops;FpArith;InsType",
+        "MetricName": "IpFLOP"
+    },
+    {
+        "BriefDescription": "Total number of retired Instructions, Sample with: INST_RETIRED.PREC_DIST",
+        "MetricExpr": "INST_RETIRED.ANY",
+        "MetricGroup": "Summary;TmaL1",
+        "MetricName": "Instructions"
+    },
+    {
+        "BriefDescription": "Fraction of Uops delivered by the LSD (Loop Stream Detector; aka Loop Cache)",
+        "MetricExpr": "LSD.UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
+        "MetricGroup": "LSD",
+        "MetricName": "LSD_Coverage"
+    },
+    {
+        "BriefDescription": "Fraction of Uops delivered by the DSB (aka Decoded ICache; or Uop Cache)",
+        "MetricExpr": "IDQ.DSB_UOPS / (IDQ.DSB_UOPS + LSD.UOPS + IDQ.MITE_UOPS + IDQ.MS_UOPS)",
+        "MetricGroup": "DSB;FetchBW",
+        "MetricName": "DSB_Coverage"
+    },
+    {
+        "BriefDescription": "Actual Average Latency for L1 data-cache miss demand loads (in core cycles)",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / ( MEM_LOAD_RETIRED.L1_MISS + MEM_LOAD_RETIRED.FB_HIT )",
+        "MetricGroup": "MemoryBound;MemoryLat",
+        "MetricName": "Load_Miss_Real_Latency"
+    },
+    {
+        "BriefDescription": "Memory-Level-Parallelism (average number of L1 miss demand load when there is at least one such miss. Per-Logical Processor)",
+        "MetricExpr": "L1D_PEND_MISS.PENDING / L1D_PEND_MISS.PENDING_CYCLES",
+        "MetricGroup": "MemoryBound;MemoryBW",
+        "MetricName": "MLP"
+    },
+    {
+        "BriefDescription": "Utilization of the core's Page Walker(s) serving STLB misses triggered by instruction/Load/Store accesses",
+        "MetricConstraint": "NO_NMI_WATCHDOG",
+        "MetricExpr": "( ITLB_MISSES.WALK_PENDING + DTLB_LOAD_MISSES.WALK_PENDING + DTLB_STORE_MISSES.WALK_PENDING ) / ( 2 * CORE_CLKS )",
+        "MetricGroup": "MemoryTLB",
+        "MetricName": "Page_Walks_Utilization"
+    },
+    {
+        "BriefDescription": "Average data fill bandwidth to the L1 data cache [GB / sec]",
+        "MetricExpr": "64 * L1D.REPLACEMENT / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW",
+        "MetricName": "L1D_Cache_Fill_BW"
+    },
+    {
+        "BriefDescription": "Average data fill bandwidth to the L2 cache [GB / sec]",
+        "MetricExpr": "64 * L2_LINES_IN.ALL / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW",
+        "MetricName": "L2_Cache_Fill_BW"
+    },
+    {
+        "BriefDescription": "Average per-core data access bandwidth to the L3 cache [GB / sec]",
+        "MetricExpr": "64 * OFFCORE_REQUESTS.ALL_REQUESTS / 1000000000 / duration_time",
+        "MetricGroup": "MemoryBW;Offcore",
+        "MetricName": "L3_Cache_Access_BW"
+    },
+    {
+        "BriefDescription": "L1 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L1_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L1MPKI"
+    },
+    {
+        "BriefDescription": "L2 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L2_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L2MPKI"
+    },
+    {
+        "BriefDescription": "L3 cache true misses per kilo instruction for retired demand loads",
+        "MetricExpr": "1000 * MEM_LOAD_RETIRED.L3_MISS / INST_RETIRED.ANY",
+        "MetricGroup": "CacheMisses",
+        "MetricName": "L3MPKI"
+    },
+    {
+        "BriefDescription": "Average CPU Utilization",
+        "MetricExpr": "CPU_CLK_UNHALTED.REF_TSC / msr@tsc@",
+        "MetricGroup": "HPC;Summary",
+        "MetricName": "CPU_Utilization"
+    },
+    {
+        "BriefDescription": "Measured Average Frequency for unhalted processors [GHz]",
+        "MetricExpr": "(CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC) * msr@tsc@ / 1000000000 / duration_time",
+        "MetricGroup": "Summary;Power",
+        "MetricName": "Average_Frequency"
+    },
+    {
+        "BriefDescription": "Giga Floating Point Operations Per Second",
+        "MetricExpr": "( ( 1 * ( FP_ARITH_INST_RETIRED.SCALAR_SINGLE + FP_ARITH_INST_RETIRED.SCALAR_DOUBLE ) + 2 * FP_ARITH_INST_RETIRED.128B_PACKED_DOUBLE + 4 * ( FP_ARITH_INST_RETIRED.128B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.256B_PACKED_DOUBLE ) + 8 * ( FP_ARITH_INST_RETIRED.256B_PACKED_SINGLE + FP_ARITH_INST_RETIRED.512B_PACKED_DOUBLE ) + 16 * FP_ARITH_INST_RETIRED.512B_PACKED_SINGLE ) / 1000000000 ) / duration_time",
+        "MetricGroup": "Flops;HPC",
+        "MetricName": "GFLOPs"
+    },
+    {
+        "BriefDescription": "Average Frequency Utilization relative nominal frequency",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD / CPU_CLK_UNHALTED.REF_TSC",
+        "MetricGroup": "Power",
+        "MetricName": "Turbo_Utilization"
+    },
+    {
+        "BriefDescription": "Fraction of cycles where both hardware Logical Processors were active",
+        "MetricExpr": "1 - CPU_CLK_UNHALTED.ONE_THREAD_ACTIVE / CPU_CLK_UNHALTED.REF_DISTRIBUTED",
+        "MetricGroup": "SMT",
+        "MetricName": "SMT_2T_Utilization"
+    },
+    {
+        "BriefDescription": "Fraction of cycles spent in the Operating System (OS) Kernel mode",
+        "MetricExpr": "CPU_CLK_UNHALTED.THREAD_P:k / CPU_CLK_UNHALTED.THREAD",
+        "MetricGroup": "OS",
+        "MetricName": "Kernel_Utilization"
+    },
+    {
+        "BriefDescription": "Instructions per Far Branch ( Far Branches apply upon transition from application to operating system, handling interrupts, exceptions) [lower number means higher occurrence rate]",
+        "MetricExpr": "INST_RETIRED.ANY / BR_INST_RETIRED.FAR_BRANCH:u",
+        "MetricGroup": "Branches;OS",
+        "MetricName": "IpFarBranch"
+    },
+    {
+        "BriefDescription": "C6 residency percent per core",
+        "MetricExpr": "(cstate_core@c6\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C6_Core_Residency"
+    },
+    {
+        "BriefDescription": "C7 residency percent per core",
+        "MetricExpr": "(cstate_core@c7\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C7_Core_Residency"
+    },
+    {
+        "BriefDescription": "C6 residency percent per package",
+        "MetricExpr": "(cstate_pkg@c6\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C6_Pkg_Residency"
+    },
+    {
+        "BriefDescription": "C7 residency percent per package",
+        "MetricExpr": "(cstate_pkg@c7\\-residency@ / msr@tsc@) * 100",
+        "MetricGroup": "Power",
+        "MetricName": "C7_Pkg_Residency"
+    }
+]
diff --git a/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json b/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json
new file mode 100644
index 000000000000..3ebec78969b0
--- /dev/null
+++ b/tools/perf/pmu-events/arch/x86/tigerlake/virtual-memory.json
@@ -0,0 +1,225 @@
+[
+    {
+        "BriefDescription": "Loads that miss the DTLB and hit the STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.STLB_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts loads that miss the DTLB (Data TLB) and hit the STLB (Second level TLB).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a demand load.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_ACTIVE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a demand load.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Load miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data loads. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Page walks completed due to a demand data load to a 2M/4M page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_2M_4M",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks  (2M/4M sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Page walks completed due to a demand data load to a 4K page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_COMPLETED_4K",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks  (4K sizes) caused by demand data loads. This implies address translations missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of page walks outstanding for a demand load in the PMH each cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x08",
+        "EventName": "DTLB_LOAD_MISSES.WALK_PENDING",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding for a demand load in the PMH (Page Miss Handler) each cycle.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Stores that miss the DTLB and hit the STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.STLB_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts stores that miss the DTLB (Data TLB) and hit the STLB (2nd Level TLB).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for a store.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_ACTIVE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a store.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Store misses in all TLB levels causes a page walk that completes. (All page sizes)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks  (all page sizes) caused by demand data stores. This implies it missed in the DTLB and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Page walks completed due to a demand data store to a 2M/4M page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_2M_4M",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 2M/4M pages.  The page walks can end with or without a page fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Page walks completed due to a demand data store to a 4K page.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_COMPLETED_4K",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts page walks completed due to demand data stores whose address translations missed in the TLB and were mapped to 4K pages.  The page walks can end with or without a page fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of page walks outstanding for a store in the PMH each cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x49",
+        "EventName": "DTLB_STORE_MISSES.WALK_PENDING",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding for a store in the PMH (Page Miss Handler) each cycle.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Instruction fetch requests that miss the ITLB and hit the STLB.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.STLB_HIT",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts instruction fetch requests that miss the ITLB (Instruction TLB) and hit the STLB (Second-level TLB).",
+        "SampleAfterValue": "100003",
+        "UMask": "0x20"
+    },
+    {
+        "BriefDescription": "Cycles when at least one PMH is busy with a page walk for code (instruction fetch) request.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "CounterMask": "1",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_ACTIVE",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts cycles when at least one PMH (Page Miss Handler) is busy with a page walk for a code (instruction fetch) request.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (All page sizes)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks (all page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0xe"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (2M/4M)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_2M_4M",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks (2M/4M page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x4"
+    },
+    {
+        "BriefDescription": "Code miss in all TLB levels causes a page walk that completes. (4K)",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_COMPLETED_4K",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts completed page walks (4K page sizes) caused by a code fetch. This implies it missed in the ITLB (Instruction TLB) and further levels of TLB. The page walk can end with or without a fault.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x2"
+    },
+    {
+        "BriefDescription": "Number of page walks outstanding for an outstanding code request in the PMH each cycle.",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0x85",
+        "EventName": "ITLB_MISSES.WALK_PENDING",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of page walks outstanding for an outstanding code (instruction fetch) request in the PMH (Page Miss Handler) each cycle.",
+        "SampleAfterValue": "100003",
+        "UMask": "0x10"
+    },
+    {
+        "BriefDescription": "DTLB flush attempts of the thread-specific entries",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xbd",
+        "EventName": "TLB_FLUSH.DTLB_THREAD",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of DTLB flush attempts of the thread-specific entries.",
+        "SampleAfterValue": "100007",
+        "UMask": "0x1"
+    },
+    {
+        "BriefDescription": "STLB flush attempts",
+        "CollectPEBSRecord": "2",
+        "Counter": "0,1,2,3",
+        "EventCode": "0xbd",
+        "EventName": "TLB_FLUSH.STLB_ANY",
+        "PEBScounters": "0,1,2,3",
+        "PublicDescription": "Counts the number of any STLB flush attempts (such as entire, VPID, PCID, InvPage, CR3 write, etc.).",
+        "SampleAfterValue": "100007",
+        "UMask": "0x20"
+    }
+]
\ No newline at end of file
diff --git a/tools/perf/pmu-events/jevents.c b/tools/perf/pmu-events/jevents.c
index 9604446f8360..6731b3cf0c2f 100644
--- a/tools/perf/pmu-events/jevents.c
+++ b/tools/perf/pmu-events/jevents.c
@@ -814,7 +814,7 @@ static void print_mapping_test_table(FILE *outfp)
 	fprintf(outfp, "\t.cpuid = \"testcpu\",\n");
 	fprintf(outfp, "\t.version = \"v1\",\n");
 	fprintf(outfp, "\t.type = \"core\",\n");
-	fprintf(outfp, "\t.table = pme_test_cpu,\n");
+	fprintf(outfp, "\t.table = pme_test_soc_cpu,\n");
 	fprintf(outfp, "},\n");
 }
 
@@ -836,7 +836,8 @@ static int process_system_event_tables(FILE *outfp)
 	print_system_event_mapping_table_prefix(outfp);
 
 	list_for_each_entry(sys_event_table, &sys_event_tables, list) {
-		fprintf(outfp, "\n\t{\n\t\t.table = %s,\n\t},",
+		fprintf(outfp, "\n\t{\n\t\t.table = %s,\n\t\t.name = \"%s\",\n\t},",
+			sys_event_table->soc_id,
 			sys_event_table->soc_id);
 	}
 
diff --git a/tools/perf/pmu-events/pmu-events.h b/tools/perf/pmu-events/pmu-events.h
index d1172f6aebf1..5c2bf7275c1c 100644
--- a/tools/perf/pmu-events/pmu-events.h
+++ b/tools/perf/pmu-events/pmu-events.h
@@ -45,6 +45,7 @@ struct pmu_events_map {
 };
 
 struct pmu_sys_events {
+	const char *name;
 	struct pmu_event *table;
 };
 
diff --git a/tools/perf/scripts/python/flamegraph.py b/tools/perf/scripts/python/flamegraph.py
index 65780013f745..b6af1dd5f816 100755
--- a/tools/perf/scripts/python/flamegraph.py
+++ b/tools/perf/scripts/python/flamegraph.py
@@ -13,6 +13,10 @@
 # Written by Andreas Gerstmayr <agerstmayr@redhat.com>
 # Flame Graphs invented by Brendan Gregg <bgregg@netflix.com>
 # Works in tandem with d3-flame-graph by Martin Spier <mspier@netflix.com>
+#
+# pylint: disable=missing-module-docstring
+# pylint: disable=missing-class-docstring
+# pylint: disable=missing-function-docstring
 
 from __future__ import print_function
 import sys
@@ -20,16 +24,19 @@ import os
 import io
 import argparse
 import json
+import subprocess
 
-
+# pylint: disable=too-few-public-methods
 class Node:
-    def __init__(self, name, libtype=""):
+    def __init__(self, name, libtype):
         self.name = name
+        # "root" | "kernel" | ""
+        # "" indicates user space
         self.libtype = libtype
         self.value = 0
         self.children = []
 
-    def toJSON(self):
+    def to_json(self):
         return {
             "n": self.name,
             "l": self.libtype,
@@ -41,7 +48,7 @@ class Node:
 class FlameGraphCLI:
     def __init__(self, args):
         self.args = args
-        self.stack = Node("root")
+        self.stack = Node("all", "root")
 
         if self.args.format == "html" and \
                 not os.path.isfile(self.args.template):
@@ -53,13 +60,21 @@ class FlameGraphCLI:
                   file=sys.stderr)
             sys.exit(1)
 
-    def find_or_create_node(self, node, name, dso):
-        libtype = "kernel" if dso == "[kernel.kallsyms]" else ""
-        if name is None:
-            name = "[unknown]"
+    @staticmethod
+    def get_libtype_from_dso(dso):
+        """
+        when kernel-debuginfo is installed,
+        dso points to /usr/lib/debug/lib/modules/*/vmlinux
+        """
+        if dso and (dso == "[kernel.kallsyms]" or dso.endswith("/vmlinux")):
+            return "kernel"
 
+        return ""
+
+    @staticmethod
+    def find_or_create_node(node, name, libtype):
         for child in node.children:
-            if child.name == name and child.libtype == libtype:
+            if child.name == name:
                 return child
 
         child = Node(name, libtype)
@@ -67,30 +82,65 @@ class FlameGraphCLI:
         return child
 
     def process_event(self, event):
-        node = self.find_or_create_node(self.stack, event["comm"], None)
+        pid = event.get("sample", {}).get("pid", 0)
+        # event["dso"] sometimes contains /usr/lib/debug/lib/modules/*/vmlinux
+        # for user-space processes; let's use pid for kernel or user-space distinction
+        if pid == 0:
+            comm = event["comm"]
+            libtype = "kernel"
+        else:
+            comm = "{} ({})".format(event["comm"], pid)
+            libtype = ""
+        node = self.find_or_create_node(self.stack, comm, libtype)
+
         if "callchain" in event:
-            for entry in reversed(event['callchain']):
-                node = self.find_or_create_node(
-                    node, entry.get("sym", {}).get("name"), event.get("dso"))
+            for entry in reversed(event["callchain"]):
+                name = entry.get("sym", {}).get("name", "[unknown]")
+                libtype = self.get_libtype_from_dso(entry.get("dso"))
+                node = self.find_or_create_node(node, name, libtype)
         else:
-            node = self.find_or_create_node(
-                node, entry.get("symbol"), event.get("dso"))
+            name = event.get("symbol", "[unknown]")
+            libtype = self.get_libtype_from_dso(event.get("dso"))
+            node = self.find_or_create_node(node, name, libtype)
         node.value += 1
 
+    def get_report_header(self):
+        if self.args.input == "-":
+            # when this script is invoked with "perf script flamegraph",
+            # no perf.data is created and we cannot read the header of it
+            return ""
+
+        try:
+            output = subprocess.check_output(["perf", "report", "--header-only"])
+            return output.decode("utf-8")
+        except Exception as err:  # pylint: disable=broad-except
+            print("Error reading report header: {}".format(err), file=sys.stderr)
+            return ""
+
     def trace_end(self):
-        json_str = json.dumps(self.stack, default=lambda x: x.toJSON())
+        stacks_json = json.dumps(self.stack, default=lambda x: x.to_json())
 
         if self.args.format == "html":
+            report_header = self.get_report_header()
+            options = {
+                "colorscheme": self.args.colorscheme,
+                "context": report_header
+            }
+            options_json = json.dumps(options)
+
             try:
-                with io.open(self.args.template, encoding="utf-8") as f:
-                    output_str = f.read().replace("/** @flamegraph_json **/",
-                                                  json_str)
-            except IOError as e:
-                print("Error reading template file: {}".format(e), file=sys.stderr)
+                with io.open(self.args.template, encoding="utf-8") as template:
+                    output_str = (
+                        template.read()
+                        .replace("/** @options_json **/", options_json)
+                        .replace("/** @flamegraph_json **/", stacks_json)
+                    )
+            except IOError as err:
+                print("Error reading template file: {}".format(err), file=sys.stderr)
                 sys.exit(1)
             output_fn = self.args.output or "flamegraph.html"
         else:
-            output_str = json_str
+            output_str = stacks_json
             output_fn = self.args.output or "stacks.json"
 
         if output_fn == "-":
@@ -101,8 +151,8 @@ class FlameGraphCLI:
             try:
                 with io.open(output_fn, "w", encoding="utf-8") as out:
                     out.write(output_str)
-            except IOError as e:
-                print("Error writing output file: {}".format(e), file=sys.stderr)
+            except IOError as err:
+                print("Error writing output file: {}".format(err), file=sys.stderr)
                 sys.exit(1)
 
 
@@ -115,12 +165,16 @@ if __name__ == "__main__":
                         help="output file name")
     parser.add_argument("--template",
                         default="/usr/share/d3-flame-graph/d3-flamegraph-base.html",
-                        help="path to flamegraph HTML template")
+                        help="path to flame graph HTML template")
+    parser.add_argument("--colorscheme",
+                        default="blue-green",
+                        help="flame graph color scheme",
+                        choices=["blue-green", "orange"])
     parser.add_argument("-i", "--input",
                         help=argparse.SUPPRESS)
 
-    args = parser.parse_args()
-    cli = FlameGraphCLI(args)
+    cli_args = parser.parse_args()
+    cli = FlameGraphCLI(cli_args)
 
     process_event = cli.process_event
     trace_end = cli.trace_end
diff --git a/tools/perf/tests/Build b/tools/perf/tests/Build
index 650aec19d490..803ca426f8e6 100644
--- a/tools/perf/tests/Build
+++ b/tools/perf/tests/Build
@@ -64,6 +64,7 @@ perf-y += parse-metric.o
 perf-y += pe-file-parsing.o
 perf-y += expand-cgroup.o
 perf-y += perf-time-to-tsc.o
+perf-y += dlfilter-test.o
 
 $(OUTPUT)tests/llvm-src-base.c: tests/bpf-script-example.c tests/Build
 	$(call rule_mkdir)
diff --git a/tools/perf/tests/bitmap.c b/tools/perf/tests/bitmap.c
index 96c137360918..12b805efdca0 100644
--- a/tools/perf/tests/bitmap.c
+++ b/tools/perf/tests/bitmap.c
@@ -14,7 +14,7 @@ static unsigned long *get_bitmap(const char *str, int nbits)
 	unsigned long *bm = NULL;
 	int i;
 
-	bm = bitmap_alloc(nbits);
+	bm = bitmap_zalloc(nbits);
 
 	if (map && bm) {
 		for (i = 0; i < map->nr; i++)
diff --git a/tools/perf/tests/builtin-test.c b/tools/perf/tests/builtin-test.c
index 5e6242576236..da7dc5e45d0c 100644
--- a/tools/perf/tests/builtin-test.c
+++ b/tools/perf/tests/builtin-test.c
@@ -361,6 +361,10 @@ static struct test generic_tests[] = {
 		.is_supported = test__tsc_is_supported,
 	},
 	{
+		.desc = "dlfilter C API",
+		.func = test__dlfilter,
+	},
+	{
 		.func = NULL,
 	},
 };
@@ -594,7 +598,8 @@ static int shell_test__run(struct test *test, int subdir __maybe_unused)
 	return WEXITSTATUS(err) == 2 ? TEST_SKIP : TEST_FAIL;
 }
 
-static int run_shell_tests(int argc, const char *argv[], int i, int width)
+static int run_shell_tests(int argc, const char *argv[], int i, int width,
+				struct intlist *skiplist)
 {
 	struct dirent **entlist;
 	struct dirent *ent;
@@ -628,6 +633,12 @@ static int run_shell_tests(int argc, const char *argv[], int i, int width)
 
 		st.file = ent->d_name;
 		pr_info("%2d: %-*s:", i, width, test.desc);
+
+		if (intlist__find(skiplist, i)) {
+			color_fprintf(stderr, PERF_COLOR_YELLOW, " Skip (user override)\n");
+			continue;
+		}
+
 		test_and_print(&test, false, -1);
 	}
 
@@ -727,7 +738,7 @@ static int __cmd_test(int argc, const char *argv[], struct intlist *skiplist)
 		}
 	}
 
-	return run_shell_tests(argc, argv, i, width);
+	return run_shell_tests(argc, argv, i, width, skiplist);
 }
 
 static int perf_test__list_shell(int argc, const char **argv, int i)
diff --git a/tools/perf/tests/dlfilter-test.c b/tools/perf/tests/dlfilter-test.c
new file mode 100644
index 000000000000..bc03b5df6828
--- /dev/null
+++ b/tools/perf/tests/dlfilter-test.c
@@ -0,0 +1,416 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Test dlfilter C API. A perf.data file is synthesized and then processed
+ * by perf script with a dlfilter named dlfilter-test-api-v0.so. Also a C file
+ * is compiled to provide a dso to match the synthesized perf.data file.
+ */
+
+#include <linux/compiler.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/perf_event.h>
+#include <internal/lib.h>
+#include <subcmd/exec-cmd.h>
+#include <sys/types.h>
+#include <sys/stat.h>
+#include <fcntl.h>
+#include <stdlib.h>
+#include <unistd.h>
+#include <inttypes.h>
+#include <libgen.h>
+#include <string.h>
+#include <errno.h>
+#include "debug.h"
+#include "tool.h"
+#include "event.h"
+#include "header.h"
+#include "machine.h"
+#include "dso.h"
+#include "map.h"
+#include "symbol.h"
+#include "synthetic-events.h"
+#include "util.h"
+#include "archinsn.h"
+#include "dlfilter.h"
+#include "tests.h"
+
+#define MAP_START 0x400000
+
+struct test_data {
+	struct perf_tool tool;
+	struct machine *machine;
+	int fd;
+	u64 foo;
+	u64 bar;
+	u64 ip;
+	u64 addr;
+	char perf[PATH_MAX];
+	char perf_data_file_name[PATH_MAX];
+	char c_file_name[PATH_MAX];
+	char prog_file_name[PATH_MAX];
+	char dlfilters[PATH_MAX];
+};
+
+static int test_result(const char *msg, int ret)
+{
+	pr_debug("%s\n", msg);
+	return ret;
+}
+
+static int process(struct perf_tool *tool, union perf_event *event,
+		   struct perf_sample *sample __maybe_unused,
+		   struct machine *machine __maybe_unused)
+{
+	struct test_data *td = container_of(tool, struct test_data, tool);
+	int fd = td->fd;
+
+	if (writen(fd, event, event->header.size) != event->header.size)
+		return -1;
+
+	return 0;
+}
+
+#define MAXCMD 4096
+#define REDIRECT_TO_DEV_NULL " >/dev/null 2>&1"
+
+static __printf(1, 2) int system_cmd(const char *fmt, ...)
+{
+	char cmd[MAXCMD + sizeof(REDIRECT_TO_DEV_NULL)];
+	int ret;
+
+	va_list args;
+
+	va_start(args, fmt);
+	ret = vsnprintf(cmd, MAXCMD, fmt, args);
+	va_end(args);
+
+	if (ret <= 0 || ret >= MAXCMD)
+		return -1;
+
+	if (!verbose)
+		strcat(cmd, REDIRECT_TO_DEV_NULL);
+
+	pr_debug("Command: %s\n", cmd);
+	ret = system(cmd);
+	if (ret)
+		pr_debug("Failed with return value %d\n", ret);
+
+	return ret;
+}
+
+static bool have_gcc(void)
+{
+	pr_debug("Checking for gcc\n");
+	return !system_cmd("gcc --version");
+}
+
+static int write_attr(struct test_data *td, u64 sample_type, u64 *id)
+{
+	struct perf_event_attr attr = {
+		.size = sizeof(attr),
+		.type = PERF_TYPE_HARDWARE,
+		.config = PERF_COUNT_HW_BRANCH_INSTRUCTIONS,
+		.sample_type = sample_type,
+		.sample_period = 1,
+	};
+
+	return perf_event__synthesize_attr(&td->tool, &attr, 1, id, process);
+}
+
+static int write_comm(int fd, pid_t pid, pid_t tid, const char *comm_str)
+{
+	struct perf_record_comm comm;
+	ssize_t sz = sizeof(comm);
+
+	comm.header.type = PERF_RECORD_COMM;
+	comm.header.misc = PERF_RECORD_MISC_USER;
+	comm.header.size = sz;
+
+	comm.pid = pid;
+	comm.tid = tid;
+	strncpy(comm.comm, comm_str, 16);
+
+	if (writen(fd, &comm, sz) != sz) {
+		pr_debug("%s failed\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int write_mmap(int fd, pid_t pid, pid_t tid, u64 start, u64 len, u64 pgoff,
+		      const char *filename)
+{
+	char buf[PERF_SAMPLE_MAX_SIZE];
+	struct perf_record_mmap *mmap = (struct perf_record_mmap *)buf;
+	size_t fsz = roundup(strlen(filename) + 1, 8);
+	ssize_t sz = sizeof(*mmap) - sizeof(mmap->filename) + fsz;
+
+	mmap->header.type = PERF_RECORD_MMAP;
+	mmap->header.misc = PERF_RECORD_MISC_USER;
+	mmap->header.size = sz;
+
+	mmap->pid   = pid;
+	mmap->tid   = tid;
+	mmap->start = start;
+	mmap->len   = len;
+	mmap->pgoff = pgoff;
+	strncpy(mmap->filename, filename, sizeof(mmap->filename));
+
+	if (writen(fd, mmap, sz) != sz) {
+		pr_debug("%s failed\n", __func__);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int write_sample(struct test_data *td, u64 sample_type, u64 id, pid_t pid, pid_t tid)
+{
+	char buf[PERF_SAMPLE_MAX_SIZE];
+	union perf_event *event = (union perf_event *)buf;
+	struct perf_sample sample = {
+		.ip		= td->ip,
+		.addr		= td->addr,
+		.id		= id,
+		.time		= 1234567890,
+		.cpu		= 31,
+		.pid		= pid,
+		.tid		= tid,
+		.period		= 543212345,
+		.stream_id	= 101,
+	};
+	int err;
+
+	event->header.type = PERF_RECORD_SAMPLE;
+	event->header.misc = PERF_RECORD_MISC_USER;
+	event->header.size = perf_event__sample_event_size(&sample, sample_type, 0);
+	err = perf_event__synthesize_sample(event, sample_type, 0, &sample);
+	if (err)
+		return test_result("perf_event__synthesize_sample() failed", TEST_FAIL);
+
+	err = process(&td->tool, event, &sample, td->machine);
+	if (err)
+		return test_result("Failed to write sample", TEST_FAIL);
+
+	return TEST_OK;
+}
+
+static void close_fd(int fd)
+{
+	if (fd >= 0)
+		close(fd);
+}
+
+static const char *prog = "int bar(){};int foo(){bar();};int main(){foo();return 0;}";
+
+static int write_prog(char *file_name)
+{
+	int fd = creat(file_name, 0644);
+	ssize_t n = strlen(prog);
+	bool err = fd < 0 || writen(fd, prog, n) != n;
+
+	close_fd(fd);
+	return err ? -1 : 0;
+}
+
+static int get_dlfilters_path(char *buf, size_t sz)
+{
+	char perf[PATH_MAX];
+	char path[PATH_MAX];
+	char *perf_path;
+	char *exec_path;
+
+	perf_exe(perf, sizeof(perf));
+	perf_path = dirname(perf);
+	snprintf(path, sizeof(path), "%s/dlfilters/dlfilter-test-api-v0.so", perf_path);
+	if (access(path, R_OK)) {
+		exec_path = get_argv_exec_path();
+		if (!exec_path)
+			return -1;
+		snprintf(path, sizeof(path), "%s/dlfilters/dlfilter-test-api-v0.so", exec_path);
+		free(exec_path);
+		if (access(path, R_OK))
+			return -1;
+	}
+	strlcpy(buf, dirname(path), sz);
+	return 0;
+}
+
+static int check_filter_desc(struct test_data *td)
+{
+	char *long_desc = NULL;
+	char *desc = NULL;
+	int ret;
+
+	if (get_filter_desc(td->dlfilters, "dlfilter-test-api-v0.so", &desc, &long_desc) &&
+	    long_desc && !strcmp(long_desc, "Filter used by the 'dlfilter C API' perf test") &&
+	    desc && !strcmp(desc, "dlfilter to test v0 C API"))
+		ret = 0;
+	else
+		ret = -1;
+
+	free(desc);
+	free(long_desc);
+	return ret;
+}
+
+static int get_ip_addr(struct test_data *td)
+{
+	struct map *map;
+	struct symbol *sym;
+
+	map = dso__new_map(td->prog_file_name);
+	if (!map)
+		return -1;
+
+	sym = map__find_symbol_by_name(map, "foo");
+	if (sym)
+		td->foo = sym->start;
+
+	sym = map__find_symbol_by_name(map, "bar");
+	if (sym)
+		td->bar = sym->start;
+
+	map__put(map);
+
+	td->ip = MAP_START + td->foo;
+	td->addr = MAP_START + td->bar;
+
+	return td->foo && td->bar ? 0 : -1;
+}
+
+static int do_run_perf_script(struct test_data *td, int do_early)
+{
+	return system_cmd("%s script -i %s "
+			  "--dlfilter %s/dlfilter-test-api-v0.so "
+			  "--dlarg first "
+			  "--dlarg %d "
+			  "--dlarg %" PRIu64 " "
+			  "--dlarg %" PRIu64 " "
+			  "--dlarg %d "
+			  "--dlarg last",
+			  td->perf, td->perf_data_file_name, td->dlfilters,
+			  verbose, td->ip, td->addr, do_early);
+}
+
+static int run_perf_script(struct test_data *td)
+{
+	int do_early;
+	int err;
+
+	for (do_early = 0; do_early < 3; do_early++) {
+		err = do_run_perf_script(td, do_early);
+		if (err)
+			return err;
+	}
+	return 0;
+}
+
+#define TEST_SAMPLE_TYPE (PERF_SAMPLE_IP | PERF_SAMPLE_TID | \
+			  PERF_SAMPLE_IDENTIFIER | PERF_SAMPLE_TIME | \
+			  PERF_SAMPLE_ADDR | PERF_SAMPLE_CPU | \
+			  PERF_SAMPLE_PERIOD | PERF_SAMPLE_STREAM_ID)
+
+static int test__dlfilter_test(struct test_data *td)
+{
+	u64 sample_type = TEST_SAMPLE_TYPE;
+	pid_t pid = 12345;
+	pid_t tid = 12346;
+	u64 id = 99;
+	int err;
+
+	if (get_dlfilters_path(td->dlfilters, PATH_MAX))
+		return test_result("dlfilters not found", TEST_SKIP);
+
+	if (check_filter_desc(td))
+		return test_result("Failed to get expected filter description", TEST_FAIL);
+
+	if (!have_gcc())
+		return test_result("gcc not found", TEST_SKIP);
+
+	pr_debug("dlfilters path: %s\n", td->dlfilters);
+
+	if (write_prog(td->c_file_name))
+		return test_result("Failed to write test C file", TEST_FAIL);
+
+	if (verbose > 1)
+		system_cmd("cat %s ; echo", td->c_file_name);
+
+	if (system_cmd("gcc -g -o %s %s", td->prog_file_name, td->c_file_name))
+		return TEST_FAIL;
+
+	if (verbose > 2)
+		system_cmd("objdump -x -dS %s", td->prog_file_name);
+
+	if (get_ip_addr(td))
+		return test_result("Failed to find program symbols", TEST_FAIL);
+
+	pr_debug("Creating new host machine structure\n");
+	td->machine = machine__new_host();
+	td->machine->env = &perf_env;
+
+	td->fd = creat(td->perf_data_file_name, 0644);
+	if (td->fd < 0)
+		return test_result("Failed to create test perf.data file", TEST_FAIL);
+
+	err = perf_header__write_pipe(td->fd);
+	if (err < 0)
+		return test_result("perf_header__write_pipe() failed", TEST_FAIL);
+
+	err = write_attr(td, sample_type, &id);
+	if (err)
+		return test_result("perf_event__synthesize_attr() failed", TEST_FAIL);
+
+	if (write_comm(td->fd, pid, tid, "test-prog"))
+		return TEST_FAIL;
+
+	if (write_mmap(td->fd, pid, tid, MAP_START, 0x10000, 0, td->prog_file_name))
+		return TEST_FAIL;
+
+	if (write_sample(td, sample_type, id, pid, tid) != TEST_OK)
+		return TEST_FAIL;
+
+	if (verbose > 1)
+		system_cmd("%s script -i %s -D", td->perf, td->perf_data_file_name);
+
+	err = run_perf_script(td);
+	if (err)
+		return TEST_FAIL;
+
+	return TEST_OK;
+}
+
+static void unlink_path(const char *path)
+{
+	if (*path)
+		unlink(path);
+}
+
+static void test_data__free(struct test_data *td)
+{
+	machine__delete(td->machine);
+	close_fd(td->fd);
+	if (verbose <= 2) {
+		unlink_path(td->c_file_name);
+		unlink_path(td->prog_file_name);
+		unlink_path(td->perf_data_file_name);
+	}
+}
+
+int test__dlfilter(struct test *test __maybe_unused, int subtest __maybe_unused)
+{
+	struct test_data td = {.fd = -1};
+	int pid = getpid();
+	int err;
+
+	perf_exe(td.perf, sizeof(td.perf));
+
+	snprintf(td.perf_data_file_name, PATH_MAX, "/tmp/dlfilter-test-%u-perf-data", pid);
+	snprintf(td.c_file_name, PATH_MAX, "/tmp/dlfilter-test-%u-prog.c", pid);
+	snprintf(td.prog_file_name, PATH_MAX, "/tmp/dlfilter-test-%u-prog", pid);
+
+	err = test__dlfilter_test(&td);
+	test_data__free(&td);
+	return err;
+}
diff --git a/tools/perf/tests/dso-data.c b/tools/perf/tests/dso-data.c
index 627c1aaf1c9e..43e1b01e5afc 100644
--- a/tools/perf/tests/dso-data.c
+++ b/tools/perf/tests/dso-data.c
@@ -308,10 +308,20 @@ int test__dso_data_cache(struct test *test __maybe_unused, int subtest __maybe_u
 	return 0;
 }
 
+static long new_limit(int count)
+{
+	int fd = open("/dev/null", O_RDONLY);
+	long ret = fd;
+	if (count > 0)
+		ret = new_limit(--count);
+	close(fd);
+	return ret;
+}
+
 int test__dso_data_reopen(struct test *test __maybe_unused, int subtest __maybe_unused)
 {
 	struct machine machine;
-	long nr_end, nr = open_files_cnt();
+	long nr_end, nr = open_files_cnt(), lim = new_limit(3);
 	int fd, fd_extra;
 
 #define dso_0 (dsos[0])
@@ -334,7 +344,7 @@ int test__dso_data_reopen(struct test *test __maybe_unused, int subtest __maybe_
 
 	/* Make sure we are able to open 3 fds anyway */
 	TEST_ASSERT_VAL("failed to set file limit",
-			!set_fd_limit((nr + 3)));
+			!set_fd_limit((lim)));
 
 	TEST_ASSERT_VAL("failed to create dsos\n", !dsos__create(3, TEST_FILE_SIZE));
 
diff --git a/tools/perf/tests/llvm.c b/tools/perf/tests/llvm.c
index 98da8a8757ab..33e43cce9064 100644
--- a/tools/perf/tests/llvm.c
+++ b/tools/perf/tests/llvm.c
@@ -67,12 +67,11 @@ test_llvm__fetch_bpf_obj(void **p_obj_buf,
 
 	/*
 	 * Skip this test if user's .perfconfig doesn't set [llvm] section
-	 * and clang is not found in $PATH, and this is not perf test -v
+	 * and clang is not found in $PATH
 	 */
-	if (!force && (verbose <= 0 &&
-		       !llvm_param.user_set_param &&
+	if (!force && (!llvm_param.user_set_param &&
 		       llvm__search_clang())) {
-		pr_debug("No clang and no verbosive, skip this test\n");
+		pr_debug("No clang, skip this test\n");
 		return TEST_SKIP;
 	}
 
diff --git a/tools/perf/tests/mem2node.c b/tools/perf/tests/mem2node.c
index a258bd51f1a4..e4d0d58b97f8 100644
--- a/tools/perf/tests/mem2node.c
+++ b/tools/perf/tests/mem2node.c
@@ -27,7 +27,7 @@ static unsigned long *get_bitmap(const char *str, int nbits)
 	unsigned long *bm = NULL;
 	int i;
 
-	bm = bitmap_alloc(nbits);
+	bm = bitmap_zalloc(nbits);
 
 	if (map && bm) {
 		for (i = 0; i < map->nr; i++) {
diff --git a/tools/perf/tests/parse-events.c b/tools/perf/tests/parse-events.c
index 8d4866739255..fd3556cc9ad4 100644
--- a/tools/perf/tests/parse-events.c
+++ b/tools/perf/tests/parse-events.c
@@ -9,6 +9,7 @@
 #include "pmu-hybrid.h"
 #include <dirent.h>
 #include <errno.h>
+#include "fncache.h"
 #include <sys/types.h>
 #include <sys/stat.h>
 #include <unistd.h>
@@ -2194,9 +2195,91 @@ static int test_pmu_events(void)
 	return ret;
 }
 
+static bool test_alias(char **event, char **alias)
+{
+	char path[PATH_MAX];
+	DIR *dir;
+	struct dirent *dent;
+	const char *sysfs = sysfs__mountpoint();
+	char buf[128];
+	FILE *file;
+
+	if (!sysfs)
+		return false;
+
+	snprintf(path, PATH_MAX, "%s/bus/event_source/devices/", sysfs);
+	dir = opendir(path);
+	if (!dir)
+		return false;
+
+	while ((dent = readdir(dir))) {
+		if (!strcmp(dent->d_name, ".") ||
+		    !strcmp(dent->d_name, ".."))
+			continue;
+
+		snprintf(path, PATH_MAX, "%s/bus/event_source/devices/%s/alias",
+			 sysfs, dent->d_name);
+
+		if (!file_available(path))
+			continue;
+
+		file = fopen(path, "r");
+		if (!file)
+			continue;
+
+		if (!fgets(buf, sizeof(buf), file)) {
+			fclose(file);
+			continue;
+		}
+
+		/* Remove the last '\n' */
+		buf[strlen(buf) - 1] = 0;
+
+		fclose(file);
+		*event = strdup(dent->d_name);
+		*alias = strdup(buf);
+		closedir(dir);
+
+		if (*event == NULL || *alias == NULL) {
+			free(*event);
+			free(*alias);
+			return false;
+		}
+
+		return true;
+	}
+
+	closedir(dir);
+	return false;
+}
+
+static int test__checkevent_pmu_events_alias(struct evlist *evlist)
+{
+	struct evsel *evsel1 = evlist__first(evlist);
+	struct evsel *evsel2 = evlist__last(evlist);
+
+	TEST_ASSERT_VAL("wrong type", evsel1->core.attr.type == evsel2->core.attr.type);
+	TEST_ASSERT_VAL("wrong config", evsel1->core.attr.config == evsel2->core.attr.config);
+	return 0;
+}
+
+static int test_pmu_events_alias(char *event, char *alias)
+{
+	struct evlist_test e = { .id = 0, };
+	char name[2 * NAME_MAX + 20];
+
+	snprintf(name, sizeof(name), "%s/event=1/,%s/event=1/",
+		 event, alias);
+
+	e.name  = name;
+	e.check = test__checkevent_pmu_events_alias;
+	return test_event(&e);
+}
+
 int test__parse_events(struct test *test __maybe_unused, int subtest __maybe_unused)
 {
 	int ret1, ret2 = 0;
+	char *event, *alias;
 
 #define TEST_EVENTS(tests)				\
 do {							\
@@ -2221,6 +2304,15 @@ do {							\
 			return ret;
 	}
 
+	if (test_alias(&event, &alias)) {
+		int ret = test_pmu_events_alias(event, alias);
+
+		free(event);
+		free(alias);
+		if (ret)
+			return ret;
+	}
+
 	ret1 = test_terms(test__terms, ARRAY_SIZE(test__terms));
 	if (!ret2)
 		ret2 = ret1;
diff --git a/tools/perf/tests/pmu-events.c b/tools/perf/tests/pmu-events.c
index b8aff8fb50d8..43743cf719ef 100644
--- a/tools/perf/tests/pmu-events.c
+++ b/tools/perf/tests/pmu-events.c
@@ -28,110 +28,190 @@ struct perf_pmu_test_event {
 	 * be set in the alias.
 	 */
 	const char *alias_long_desc;
+
+	/* PMU which we should match against */
+	const char *matching_pmu;
 };
 
-static struct perf_pmu_test_event test_cpu_events[] = {
-	{
-		.event = {
-			.name = "bp_l1_btb_correct",
-			.event = "event=0x8a",
-			.desc = "L1 BTB Correction",
-			.topic = "branch",
-		},
-		.alias_str = "event=0x8a",
-		.alias_long_desc = "L1 BTB Correction",
+struct perf_pmu_test_pmu {
+	struct perf_pmu pmu;
+	struct perf_pmu_test_event const *aliases[10];
+};
+
+static const struct perf_pmu_test_event bp_l1_btb_correct = {
+	.event = {
+		.name = "bp_l1_btb_correct",
+		.event = "event=0x8a",
+		.desc = "L1 BTB Correction",
+		.topic = "branch",
 	},
-	{
-		.event = {
-			.name = "bp_l2_btb_correct",
-			.event = "event=0x8b",
-			.desc = "L2 BTB Correction",
-			.topic = "branch",
-		},
-		.alias_str = "event=0x8b",
-		.alias_long_desc = "L2 BTB Correction",
+	.alias_str = "event=0x8a",
+	.alias_long_desc = "L1 BTB Correction",
+};
+
+static const struct perf_pmu_test_event bp_l2_btb_correct = {
+	.event = {
+		.name = "bp_l2_btb_correct",
+		.event = "event=0x8b",
+		.desc = "L2 BTB Correction",
+		.topic = "branch",
 	},
-	{
-		.event = {
-			.name = "segment_reg_loads.any",
-			.event = "umask=0x80,period=200000,event=0x6",
-			.desc = "Number of segment register loads",
-			.topic = "other",
-		},
-		.alias_str = "umask=0x80,(null)=0x30d40,event=0x6",
-		.alias_long_desc = "Number of segment register loads",
+	.alias_str = "event=0x8b",
+	.alias_long_desc = "L2 BTB Correction",
+};
+
+static const struct perf_pmu_test_event segment_reg_loads_any = {
+	.event = {
+		.name = "segment_reg_loads.any",
+		.event = "umask=0x80,period=200000,event=0x6",
+		.desc = "Number of segment register loads",
+		.topic = "other",
 	},
-	{
-		.event = {
-			.name = "dispatch_blocked.any",
-			.event = "umask=0x20,period=200000,event=0x9",
-			.desc = "Memory cluster signals to block micro-op dispatch for any reason",
-			.topic = "other",
-		},
-		.alias_str = "umask=0x20,(null)=0x30d40,event=0x9",
-		.alias_long_desc = "Memory cluster signals to block micro-op dispatch for any reason",
+	.alias_str = "umask=0x80,(null)=0x30d40,event=0x6",
+	.alias_long_desc = "Number of segment register loads",
+};
+
+static const struct perf_pmu_test_event dispatch_blocked_any = {
+	.event = {
+		.name = "dispatch_blocked.any",
+		.event = "umask=0x20,period=200000,event=0x9",
+		.desc = "Memory cluster signals to block micro-op dispatch for any reason",
+		.topic = "other",
 	},
-	{
-		.event = {
-			.name = "eist_trans",
-			.event = "umask=0x0,period=200000,event=0x3a",
-			.desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
-			.topic = "other",
-		},
-		.alias_str = "umask=0,(null)=0x30d40,event=0x3a",
-		.alias_long_desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
+	.alias_str = "umask=0x20,(null)=0x30d40,event=0x9",
+	.alias_long_desc = "Memory cluster signals to block micro-op dispatch for any reason",
+};
+
+static const struct perf_pmu_test_event eist_trans = {
+	.event = {
+		.name = "eist_trans",
+		.event = "umask=0x0,period=200000,event=0x3a",
+		.desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
+		.topic = "other",
 	},
-	{
-		.event = {
-			.name = "l3_cache_rd",
-			.event = "event=0x40",
-			.desc = "L3 cache access, read",
-			.long_desc = "Attributable Level 3 cache access, read",
-			.topic = "cache",
-		},
-		.alias_str = "event=0x40",
-		.alias_long_desc = "Attributable Level 3 cache access, read",
+	.alias_str = "umask=0,(null)=0x30d40,event=0x3a",
+	.alias_long_desc = "Number of Enhanced Intel SpeedStep(R) Technology (EIST) transitions",
+};
+
+static const struct perf_pmu_test_event l3_cache_rd = {
+	.event = {
+		.name = "l3_cache_rd",
+		.event = "event=0x40",
+		.desc = "L3 cache access, read",
+		.long_desc = "Attributable Level 3 cache access, read",
+		.topic = "cache",
 	},
-	{ /* sentinel */
-		.event = {
-			.name = NULL,
-		},
+	.alias_str = "event=0x40",
+	.alias_long_desc = "Attributable Level 3 cache access, read",
+};
+
+static const struct perf_pmu_test_event *core_events[] = {
+	&bp_l1_btb_correct,
+	&bp_l2_btb_correct,
+	&segment_reg_loads_any,
+	&dispatch_blocked_any,
+	&eist_trans,
+	&l3_cache_rd,
+	NULL
+};
+
+static const struct perf_pmu_test_event uncore_hisi_ddrc_flux_wcmd = {
+	.event = {
+		.name = "uncore_hisi_ddrc.flux_wcmd",
+		.event = "event=0x2",
+		.desc = "DDRC write commands. Unit: hisi_sccl,ddrc ",
+		.topic = "uncore",
+		.long_desc = "DDRC write commands",
+		.pmu = "hisi_sccl,ddrc",
 	},
+	.alias_str = "event=0x2",
+	.alias_long_desc = "DDRC write commands",
+	.matching_pmu = "hisi_sccl1_ddrc2",
 };
 
-static struct perf_pmu_test_event test_uncore_events[] = {
-	{
-		.event = {
-			.name = "uncore_hisi_ddrc.flux_wcmd",
-			.event = "event=0x2",
-			.desc = "DDRC write commands. Unit: hisi_sccl,ddrc ",
-			.topic = "uncore",
-			.long_desc = "DDRC write commands",
-			.pmu = "hisi_sccl,ddrc",
-		},
-		.alias_str = "event=0x2",
-		.alias_long_desc = "DDRC write commands",
+static const struct perf_pmu_test_event unc_cbo_xsnp_response_miss_eviction = {
+	.event = {
+		.name = "unc_cbo_xsnp_response.miss_eviction",
+		.event = "umask=0x81,event=0x22",
+		.desc = "Unit: uncore_cbox A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+		.topic = "uncore",
+		.long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+		.pmu = "uncore_cbox",
 	},
-	{
-		.event = {
-			.name = "unc_cbo_xsnp_response.miss_eviction",
-			.event = "umask=0x81,event=0x22",
-			.desc = "Unit: uncore_cbox A cross-core snoop resulted from L3 Eviction which misses in some processor core",
-			.topic = "uncore",
-			.long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
-			.pmu = "uncore_cbox",
-		},
-		.alias_str = "umask=0x81,event=0x22",
-		.alias_long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+	.alias_str = "umask=0x81,event=0x22",
+	.alias_long_desc = "A cross-core snoop resulted from L3 Eviction which misses in some processor core",
+	.matching_pmu = "uncore_cbox_0",
+};
+
+static const struct perf_pmu_test_event uncore_hisi_l3c_rd_hit_cpipe = {
+	.event = {
+		.name = "uncore_hisi_l3c.rd_hit_cpipe",
+		.event = "event=0x2",
+		.desc = "Total read hits. Unit: hisi_sccl,l3c ",
+		.topic = "uncore",
+		.long_desc = "Total read hits",
+		.pmu = "hisi_sccl,l3c",
 	},
-	{ /* sentinel */
-		.event = {
-			.name = NULL,
-		},
-	}
+	.alias_str = "event=0x7",
+	.alias_long_desc = "Total read hits",
+	.matching_pmu = "hisi_sccl3_l3c7",
+};
+
+static const struct perf_pmu_test_event uncore_imc_free_running_cache_miss = {
+	.event = {
+		.name = "uncore_imc_free_running.cache_miss",
+		.event = "event=0x12",
+		.desc = "Total cache misses. Unit: uncore_imc_free_running ",
+		.topic = "uncore",
+		.long_desc = "Total cache misses",
+		.pmu = "uncore_imc_free_running",
+	},
+	.alias_str = "event=0x12",
+	.alias_long_desc = "Total cache misses",
+	.matching_pmu = "uncore_imc_free_running_0",
+};
+
+static const struct perf_pmu_test_event uncore_imc_cache_hits = {
+	.event = {
+		.name = "uncore_imc.cache_hits",
+		.event = "event=0x34",
+		.desc = "Total cache hits. Unit: uncore_imc ",
+		.topic = "uncore",
+		.long_desc = "Total cache hits",
+		.pmu = "uncore_imc",
+	},
+	.alias_str = "event=0x34",
+	.alias_long_desc = "Total cache hits",
+	.matching_pmu = "uncore_imc_0",
+};
+
+static const struct perf_pmu_test_event *uncore_events[] = {
+	&uncore_hisi_ddrc_flux_wcmd,
+	&unc_cbo_xsnp_response_miss_eviction,
+	&uncore_hisi_l3c_rd_hit_cpipe,
+	&uncore_imc_free_running_cache_miss,
+	&uncore_imc_cache_hits,
+	NULL
 };
 
-const int total_test_events_size = ARRAY_SIZE(test_uncore_events);
+static const struct perf_pmu_test_event sys_ddr_pmu_write_cycles = {
+	.event = {
+		.name = "sys_ddr_pmu.write_cycles",
+		.event = "event=0x2b",
+		.desc = "ddr write-cycles event. Unit: uncore_sys_ddr_pmu ",
+		.topic = "uncore",
+		.pmu = "uncore_sys_ddr_pmu",
+		.compat = "v8",
+	},
+	.alias_str = "event=0x2b",
+	.alias_long_desc = "ddr write-cycles event. Unit: uncore_sys_ddr_pmu ",
+	.matching_pmu = "uncore_sys_ddr_pmu",
+};
+
+static const struct perf_pmu_test_event *sys_events[] = {
+	&sys_ddr_pmu_write_cycles,
+	NULL
+};
 
 static bool is_same(const char *reference, const char *test)
 {
@@ -161,99 +241,207 @@ static struct pmu_events_map *__test_pmu_get_events_map(void)
 	return NULL;
 }
 
-/* Verify generated events from pmu-events.c is as expected */
+static struct pmu_event *__test_pmu_get_sys_events_table(void)
+{
+	struct pmu_sys_events *tables = &pmu_sys_event_tables[0];
+
+	for ( ; tables->name; tables++) {
+		if (!strcmp("pme_test_soc_sys", tables->name))
+			return tables->table;
+	}
+
+	return NULL;
+}
+
+static int compare_pmu_events(struct pmu_event *e1, const struct pmu_event *e2)
+{
+	if (!is_same(e1->desc, e2->desc)) {
+		pr_debug2("testing event e1 %s: mismatched desc, %s vs %s\n",
+			  e1->name, e1->desc, e2->desc);
+		return -1;
+	}
+
+	if (!is_same(e1->topic, e2->topic)) {
+		pr_debug2("testing event e1 %s: mismatched topic, %s vs %s\n",
+			  e1->name, e1->topic, e2->topic);
+		return -1;
+	}
+
+	if (!is_same(e1->long_desc, e2->long_desc)) {
+		pr_debug2("testing event e1 %s: mismatched long_desc, %s vs %s\n",
+			  e1->name, e1->long_desc, e2->long_desc);
+		return -1;
+	}
+
+	if (!is_same(e1->unit, e2->unit)) {
+		pr_debug2("testing event e1 %s: mismatched unit, %s vs %s\n",
+			  e1->name, e1->unit, e2->unit);
+		return -1;
+	}
+
+	if (!is_same(e1->perpkg, e2->perpkg)) {
+		pr_debug2("testing event e1 %s: mismatched perpkg, %s vs %s\n",
+			  e1->name, e1->perpkg, e2->perpkg);
+		return -1;
+	}
+
+	if (!is_same(e1->metric_expr, e2->metric_expr)) {
+		pr_debug2("testing event e1 %s: mismatched metric_expr, %s vs %s\n",
+			  e1->name, e1->metric_expr, e2->metric_expr);
+		return -1;
+	}
+
+	if (!is_same(e1->metric_name, e2->metric_name)) {
+		pr_debug2("testing event e1 %s: mismatched metric_name, %s vs %s\n",
+			  e1->name,	e1->metric_name, e2->metric_name);
+		return -1;
+	}
+
+	if (!is_same(e1->deprecated, e2->deprecated)) {
+		pr_debug2("testing event e1 %s: mismatched deprecated, %s vs %s\n",
+			  e1->name, e1->deprecated, e2->deprecated);
+		return -1;
+	}
+
+	if (!is_same(e1->pmu, e2->pmu)) {
+		pr_debug2("testing event e1 %s: mismatched pmu string, %s vs %s\n",
+			  e1->name, e1->pmu, e2->pmu);
+		return -1;
+	}
+
+	if (!is_same(e1->compat, e2->compat)) {
+		pr_debug2("testing event e1 %s: mismatched compat string, %s vs %s\n",
+			  e1->name, e1->compat, e2->compat);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int compare_alias_to_test_event(struct perf_pmu_alias *alias,
+				struct perf_pmu_test_event const *test_event,
+				char const *pmu_name)
+{
+	struct pmu_event const *event = &test_event->event;
+
+	/* An alias was found, ensure everything is in order */
+	if (!is_same(alias->name, event->name)) {
+		pr_debug("testing aliases PMU %s: mismatched name, %s vs %s\n",
+			  pmu_name, alias->name, event->name);
+		return -1;
+	}
+
+	if (!is_same(alias->desc, event->desc)) {
+		pr_debug("testing aliases PMU %s: mismatched desc, %s vs %s\n",
+			  pmu_name, alias->desc, event->desc);
+		return -1;
+	}
+
+	if (!is_same(alias->long_desc, test_event->alias_long_desc)) {
+		pr_debug("testing aliases PMU %s: mismatched long_desc, %s vs %s\n",
+			  pmu_name, alias->long_desc,
+			  test_event->alias_long_desc);
+		return -1;
+	}
+
+	if (!is_same(alias->topic, event->topic)) {
+		pr_debug("testing aliases PMU %s: mismatched topic, %s vs %s\n",
+			  pmu_name, alias->topic, event->topic);
+		return -1;
+	}
+
+	if (!is_same(alias->str, test_event->alias_str)) {
+		pr_debug("testing aliases PMU %s: mismatched str, %s vs %s\n",
+			  pmu_name, alias->str, test_event->alias_str);
+		return -1;
+	}
+
+	if (!is_same(alias->long_desc, test_event->alias_long_desc)) {
+		pr_debug("testing aliases PMU %s: mismatched long desc, %s vs %s\n",
+			  pmu_name, alias->str, test_event->alias_long_desc);
+		return -1;
+	}
+
+
+	if (!is_same(alias->pmu_name, test_event->event.pmu)) {
+		pr_debug("testing aliases PMU %s: mismatched pmu_name, %s vs %s\n",
+			  pmu_name, alias->pmu_name, test_event->event.pmu);
+		return -1;
+	}
+
+	return 0;
+}
+
+/* Verify generated events from pmu-events.c are as expected */
 static int test_pmu_event_table(void)
 {
+	struct pmu_event *sys_event_tables = __test_pmu_get_sys_events_table();
 	struct pmu_events_map *map = __test_pmu_get_events_map();
 	struct pmu_event *table;
 	int map_events = 0, expected_events;
 
-	/* ignore 2x sentinels */
-	expected_events = ARRAY_SIZE(test_cpu_events) +
-			  ARRAY_SIZE(test_uncore_events) - 2;
+	/* ignore 3x sentinels */
+	expected_events = ARRAY_SIZE(core_events) +
+			  ARRAY_SIZE(uncore_events) +
+			  ARRAY_SIZE(sys_events) - 3;
 
-	if (!map)
+	if (!map || !sys_event_tables)
 		return -1;
 
 	for (table = map->table; table->name; table++) {
-		struct perf_pmu_test_event *test;
-		struct pmu_event *te;
+		struct perf_pmu_test_event const **test_event_table;
 		bool found = false;
 
 		if (table->pmu)
-			test = &test_uncore_events[0];
+			test_event_table = &uncore_events[0];
 		else
-			test = &test_cpu_events[0];
+			test_event_table = &core_events[0];
 
-		te = &test->event;
+		for (; *test_event_table; test_event_table++) {
+			struct perf_pmu_test_event const *test_event = *test_event_table;
+			struct pmu_event const *event = &test_event->event;
 
-		for (; te->name; test++, te = &test->event) {
-			if (strcmp(table->name, te->name))
+			if (strcmp(table->name, event->name))
 				continue;
 			found = true;
 			map_events++;
 
-			if (!is_same(table->desc, te->desc)) {
-				pr_debug2("testing event table %s: mismatched desc, %s vs %s\n",
-					  table->name, table->desc, te->desc);
+			if (compare_pmu_events(table, event))
 				return -1;
-			}
 
-			if (!is_same(table->topic, te->topic)) {
-				pr_debug2("testing event table %s: mismatched topic, %s vs %s\n",
-					  table->name, table->topic,
-					  te->topic);
-				return -1;
-			}
+			pr_debug("testing event table %s: pass\n", table->name);
+		}
 
-			if (!is_same(table->long_desc, te->long_desc)) {
-				pr_debug2("testing event table %s: mismatched long_desc, %s vs %s\n",
-					  table->name, table->long_desc,
-					  te->long_desc);
-				return -1;
-			}
+		if (!found) {
+			pr_err("testing event table: could not find event %s\n",
+			       table->name);
+			return -1;
+		}
+	}
 
-			if (!is_same(table->unit, te->unit)) {
-				pr_debug2("testing event table %s: mismatched unit, %s vs %s\n",
-					  table->name, table->unit,
-					  te->unit);
-				return -1;
-			}
+	for (table = sys_event_tables; table->name; table++) {
+		struct perf_pmu_test_event const **test_event_table;
+		bool found = false;
 
-			if (!is_same(table->perpkg, te->perpkg)) {
-				pr_debug2("testing event table %s: mismatched perpkg, %s vs %s\n",
-					  table->name, table->perpkg,
-					  te->perpkg);
-				return -1;
-			}
+		test_event_table = &sys_events[0];
 
-			if (!is_same(table->metric_expr, te->metric_expr)) {
-				pr_debug2("testing event table %s: mismatched metric_expr, %s vs %s\n",
-					  table->name, table->metric_expr,
-					  te->metric_expr);
-				return -1;
-			}
+		for (; *test_event_table; test_event_table++) {
+			struct perf_pmu_test_event const *test_event = *test_event_table;
+			struct pmu_event const *event = &test_event->event;
 
-			if (!is_same(table->metric_name, te->metric_name)) {
-				pr_debug2("testing event table %s: mismatched metric_name, %s vs %s\n",
-					  table->name,  table->metric_name,
-					  te->metric_name);
-				return -1;
-			}
+			if (strcmp(table->name, event->name))
+				continue;
+			found = true;
+			map_events++;
 
-			if (!is_same(table->deprecated, te->deprecated)) {
-				pr_debug2("testing event table %s: mismatched deprecated, %s vs %s\n",
-					  table->name, table->deprecated,
-					  te->deprecated);
+			if (compare_pmu_events(table, event))
 				return -1;
-			}
 
-			pr_debug("testing event table %s: pass\n", table->name);
+			pr_debug("testing sys event table %s: pass\n", table->name);
 		}
-
 		if (!found) {
-			pr_err("testing event table: could not find event %s\n",
-			       table->name);
+			pr_debug("testing event table: could not find event %s\n",
+				   table->name);
 			return -1;
 		}
 	}
@@ -279,27 +467,19 @@ static struct perf_pmu_alias *find_alias(const char *test_event, struct list_hea
 }
 
 /* Verify aliases are as expected */
-static int __test__pmu_event_aliases(char *pmu_name, int *count)
+static int __test_core_pmu_event_aliases(char *pmu_name, int *count)
 {
-	struct perf_pmu_test_event *test;
-	struct pmu_event *te;
+	struct perf_pmu_test_event const **test_event_table;
 	struct perf_pmu *pmu;
 	LIST_HEAD(aliases);
 	int res = 0;
-	bool use_uncore_table;
 	struct pmu_events_map *map = __test_pmu_get_events_map();
 	struct perf_pmu_alias *a, *tmp;
 
 	if (!map)
 		return -1;
 
-	if (is_pmu_core(pmu_name)) {
-		test = &test_cpu_events[0];
-		use_uncore_table = false;
-	} else {
-		test = &test_uncore_events[0];
-		use_uncore_table = true;
-	}
+	test_event_table = &core_events[0];
 
 	pmu = zalloc(sizeof(*pmu));
 	if (!pmu)
@@ -309,91 +489,202 @@ static int __test__pmu_event_aliases(char *pmu_name, int *count)
 
 	pmu_add_cpu_aliases_map(&aliases, pmu, map);
 
-	for (te = &test->event; te->name; test++, te = &test->event) {
-		struct perf_pmu_alias *alias = find_alias(te->name, &aliases);
+	for (; *test_event_table; test_event_table++) {
+		struct perf_pmu_test_event const *test_event = *test_event_table;
+		struct pmu_event const *event = &test_event->event;
+		struct perf_pmu_alias *alias = find_alias(event->name, &aliases);
 
 		if (!alias) {
-			bool uncore_match = pmu_uncore_alias_match(pmu_name,
-								   te->pmu);
-
-			if (use_uncore_table && !uncore_match) {
-				pr_debug3("testing aliases PMU %s: skip matching alias %s\n",
-					  pmu_name, te->name);
-				continue;
-			}
-
-			pr_debug2("testing aliases PMU %s: no alias, alias_table->name=%s\n",
-				  pmu_name, te->name);
+			pr_debug("testing aliases core PMU %s: no alias, alias_table->name=%s\n",
+				  pmu_name, event->name);
 			res = -1;
 			break;
 		}
 
-		if (!is_same(alias->desc, te->desc)) {
-			pr_debug2("testing aliases PMU %s: mismatched desc, %s vs %s\n",
-				  pmu_name, alias->desc, te->desc);
+		if (compare_alias_to_test_event(alias, test_event, pmu_name)) {
 			res = -1;
 			break;
 		}
 
-		if (!is_same(alias->long_desc, test->alias_long_desc)) {
-			pr_debug2("testing aliases PMU %s: mismatched long_desc, %s vs %s\n",
-				  pmu_name, alias->long_desc,
-				  test->alias_long_desc);
-			res = -1;
-			break;
-		}
+		(*count)++;
+		pr_debug2("testing aliases core PMU %s: matched event %s\n",
+			  pmu_name, alias->name);
+	}
 
-		if (!is_same(alias->str, test->alias_str)) {
-			pr_debug2("testing aliases PMU %s: mismatched str, %s vs %s\n",
-				  pmu_name, alias->str, test->alias_str);
-			res = -1;
-			break;
+	list_for_each_entry_safe(a, tmp, &aliases, list) {
+		list_del(&a->list);
+		perf_pmu_free_alias(a);
+	}
+	free(pmu);
+	return res;
+}
+
+static int __test_uncore_pmu_event_aliases(struct perf_pmu_test_pmu *test_pmu)
+{
+	int alias_count = 0, to_match_count = 0, matched_count = 0;
+	struct perf_pmu_test_event const **table;
+	struct perf_pmu *pmu = &test_pmu->pmu;
+	const char *pmu_name = pmu->name;
+	struct perf_pmu_alias *a, *tmp, *alias;
+	struct pmu_events_map *map;
+	LIST_HEAD(aliases);
+	int res = 0;
+
+	map = __test_pmu_get_events_map();
+	if (!map)
+		return -1;
+	pmu_add_cpu_aliases_map(&aliases, pmu, map);
+	pmu_add_sys_aliases(&aliases, pmu);
+
+	/* Count how many aliases we generated */
+	list_for_each_entry(alias, &aliases, list)
+		alias_count++;
+
+	/* Count how many aliases we expect from the known table */
+	for (table = &test_pmu->aliases[0]; *table; table++)
+		to_match_count++;
+
+	if (alias_count != to_match_count) {
+		pr_debug("testing aliases uncore PMU %s: mismatch expected aliases (%d) vs found (%d)\n",
+			 pmu_name, to_match_count, alias_count);
+		res = -1;
+		goto out;
+	}
+
+	list_for_each_entry(alias, &aliases, list) {
+		bool matched = false;
+
+		for (table = &test_pmu->aliases[0]; *table; table++) {
+			struct perf_pmu_test_event const *test_event = *table;
+			struct pmu_event const *event = &test_event->event;
+
+			if (!strcmp(event->name, alias->name)) {
+				if (compare_alias_to_test_event(alias,
+							test_event,
+							pmu_name)) {
+					continue;
+				}
+				matched = true;
+				matched_count++;
+			}
 		}
 
-		if (!is_same(alias->topic, te->topic)) {
-			pr_debug2("testing aliases PMU %s: mismatched topic, %s vs %s\n",
-				  pmu_name, alias->topic, te->topic);
+		if (matched == false) {
+			pr_debug("testing aliases uncore PMU %s: could not match alias %s\n",
+				 pmu_name, alias->name);
 			res = -1;
-			break;
+			goto out;
 		}
+	}
 
-		(*count)++;
-		pr_debug2("testing aliases PMU %s: matched event %s\n",
-			  pmu_name, alias->name);
+	if (alias_count != matched_count) {
+		pr_debug("testing aliases uncore PMU %s: mismatch found aliases (%d) vs matched (%d)\n",
+			 pmu_name, matched_count, alias_count);
+		res = -1;
 	}
 
+out:
 	list_for_each_entry_safe(a, tmp, &aliases, list) {
 		list_del(&a->list);
 		perf_pmu_free_alias(a);
 	}
-	free(pmu);
 	return res;
 }
 
+static struct perf_pmu_test_pmu test_pmus[] = {
+	{
+		.pmu = {
+			.name = (char *)"hisi_sccl1_ddrc2",
+			.is_uncore = 1,
+		},
+		.aliases = {
+			&uncore_hisi_ddrc_flux_wcmd,
+		},
+	},
+	{
+		.pmu = {
+			.name = (char *)"uncore_cbox_0",
+			.is_uncore = 1,
+		},
+		.aliases = {
+			&unc_cbo_xsnp_response_miss_eviction,
+		},
+	},
+	{
+		.pmu = {
+			.name = (char *)"hisi_sccl3_l3c7",
+			.is_uncore = 1,
+		},
+		.aliases = {
+			&uncore_hisi_l3c_rd_hit_cpipe,
+		},
+	},
+	{
+		.pmu = {
+			.name = (char *)"uncore_imc_free_running_0",
+			.is_uncore = 1,
+		},
+		.aliases = {
+			&uncore_imc_free_running_cache_miss,
+		},
+	},
+	{
+		.pmu = {
+			.name = (char *)"uncore_imc_0",
+			.is_uncore = 1,
+		},
+		.aliases = {
+			&uncore_imc_cache_hits,
+		},
+	},
+	{
+		.pmu = {
+			.name = (char *)"uncore_sys_ddr_pmu0",
+			.is_uncore = 1,
+			.id = (char *)"v8",
+		},
+		.aliases = {
+			&sys_ddr_pmu_write_cycles,
+		},
+	},
+};
 
 /* Test that aliases generated are as expected */
 static int test_aliases(void)
 {
 	struct perf_pmu *pmu = NULL;
+	unsigned long i;
 
 	while ((pmu = perf_pmu__scan(pmu)) != NULL) {
 		int count = 0;
 
+		if (!is_pmu_core(pmu->name))
+			continue;
+
 		if (list_empty(&pmu->format)) {
-			pr_debug2("skipping testing PMU %s\n", pmu->name);
+			pr_debug2("skipping testing core PMU %s\n", pmu->name);
 			continue;
 		}
 
-		if (__test__pmu_event_aliases(pmu->name, &count)) {
-			pr_debug("testing PMU %s aliases: failed\n", pmu->name);
+		if (__test_core_pmu_event_aliases(pmu->name, &count)) {
+			pr_debug("testing core PMU %s aliases: failed\n", pmu->name);
 			return -1;
 		}
 
-		if (count == 0)
-			pr_debug3("testing PMU %s aliases: no events to match\n",
+		if (count == 0) {
+			pr_debug("testing core PMU %s aliases: no events to match\n",
 				  pmu->name);
-		else
-			pr_debug("testing PMU %s aliases: pass\n", pmu->name);
+			return -1;
+		}
+
+		pr_debug("testing core PMU %s aliases: pass\n", pmu->name);
+	}
+
+	for (i = 0; i < ARRAY_SIZE(test_pmus); i++) {
+		int res = __test_uncore_pmu_event_aliases(&test_pmus[i]);
+
+		if (res)
+			return res;
 	}
 
 	return 0;
diff --git a/tools/perf/tests/shell/lib/probe_vfs_getname.sh b/tools/perf/tests/shell/lib/probe_vfs_getname.sh
index c2cc42daf924..5b17d916c555 100644
--- a/tools/perf/tests/shell/lib/probe_vfs_getname.sh
+++ b/tools/perf/tests/shell/lib/probe_vfs_getname.sh
@@ -19,6 +19,6 @@ add_probe_vfs_getname() {
 }
 
 skip_if_no_debuginfo() {
-	add_probe_vfs_getname -v 2>&1 | egrep -q "^(Failed to find the path for kernel|Debuginfo-analysis is not supported)" && return 2
+	add_probe_vfs_getname -v 2>&1 | egrep -q "^(Failed to find the path for the kernel|Debuginfo-analysis is not supported)" && return 2
 	return 1
 }
diff --git a/tools/perf/tests/shell/pipe_test.sh b/tools/perf/tests/shell/pipe_test.sh
new file mode 100755
index 000000000000..1b32b4f28391
--- /dev/null
+++ b/tools/perf/tests/shell/pipe_test.sh
@@ -0,0 +1,69 @@
+#!/bin/sh
+# perf pipe recording and injection test
+# SPDX-License-Identifier: GPL-2.0
+
+# skip if there's no compiler
+if ! [ -x "$(command -v cc)" ]; then
+	echo "failed: no compiler, install gcc"
+	exit 2
+fi
+
+file=$(mktemp /tmp/test.file.XXXXXX)
+data=$(mktemp /tmp/perf.data.XXXXXX)
+
+cat <<EOF | cc -o ${file} -x c -
+#include <signal.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+volatile int done;
+
+void sigalrm(int sig) {
+	done = 1;
+}
+
+__attribute__((noinline)) void noploop(void) {
+	while (!done)
+		continue;
+}
+
+int main(int argc, char *argv[]) {
+	int sec = 1;
+
+	if (argc > 1)
+		sec = atoi(argv[1]);
+
+	signal(SIGALRM, sigalrm);
+	alarm(sec);
+
+	noploop();
+	return 0;
+}
+EOF
+
+
+if ! perf record -e task-clock:u -o - ${file} | perf report -i - --task | grep test.file; then
+	echo "cannot find the test file in the perf report"
+	exit 1
+fi
+
+if ! perf record -e task-clock:u -o - ${file} | perf inject -b | perf report -i - | grep noploop; then
+	echo "cannot find noploop function in pipe #1"
+	exit 1
+fi
+
+perf record -e task-clock:u -o - ${file} | perf inject -b -o ${data}
+if ! perf report -i ${data} | grep noploop; then
+	echo "cannot find noploop function in pipe #2"
+	exit 1
+fi
+
+perf record -e task-clock:u -o ${data} ${file}
+if ! perf inject -b -i ${data} | perf report -i - | grep noploop; then
+	echo "cannot find noploop function in pipe #3"
+	exit 1
+fi
+
+
+rm -f ${file} ${data} ${data}.old
+exit 0
diff --git a/tools/perf/tests/shell/record+zstd_comp_decomp.sh b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
index 045723b3d992..8a168cf8bacc 100755
--- a/tools/perf/tests/shell/record+zstd_comp_decomp.sh
+++ b/tools/perf/tests/shell/record+zstd_comp_decomp.sh
@@ -25,8 +25,8 @@ check_compressed_stats() {
 
 check_compressed_output() {
 	$perf_tool inject -i $trace_file -o $trace_file.decomp &&
-	$perf_tool report -i $trace_file --stdio | head -n -3 > $trace_file.comp.output &&
-	$perf_tool report -i $trace_file.decomp --stdio | head -n -3 > $trace_file.decomp.output &&
+	$perf_tool report -i $trace_file --stdio -F comm,dso,sym | head -n -3 > $trace_file.comp.output &&
+	$perf_tool report -i $trace_file.decomp --stdio -F comm,dso,sym | head -n -3 > $trace_file.decomp.output &&
 	diff $trace_file.comp.output $trace_file.decomp.output
 }
 
diff --git a/tools/perf/tests/tests.h b/tools/perf/tests/tests.h
index 1100dd55b657..fe1306f58495 100644
--- a/tools/perf/tests/tests.h
+++ b/tools/perf/tests/tests.h
@@ -127,6 +127,7 @@ int test__parse_metric(struct test *test, int subtest);
 int test__pe_file_parsing(struct test *test, int subtest);
 int test__expand_cgroup_events(struct test *test, int subtest);
 int test__perf_time_to_tsc(struct test *test, int subtest);
+int test__dlfilter(struct test *test, int subtest);
 
 bool test__bp_signal_is_supported(void);
 bool test__bp_account_is_supported(void);
diff --git a/tools/perf/tests/topology.c b/tools/perf/tests/topology.c
index b5efe675b321..b9028e304ddd 100644
--- a/tools/perf/tests/topology.c
+++ b/tools/perf/tests/topology.c
@@ -38,7 +38,7 @@ static int session_write_header(char *path)
 		.mode = PERF_DATA_MODE_WRITE,
 	};
 
-	session = perf_session__new(&data, false, NULL);
+	session = perf_session__new(&data, NULL);
 	TEST_ASSERT_VAL("can't get session", !IS_ERR(session));
 
 	if (!perf_pmu__has_hybrid()) {
@@ -77,7 +77,7 @@ static int check_cpu_topology(char *path, struct perf_cpu_map *map)
 	int i;
 	struct aggr_cpu_id id;
 
-	session = perf_session__new(&data, false, NULL);
+	session = perf_session__new(&data, NULL);
 	TEST_ASSERT_VAL("can't get session", !IS_ERR(session));
 	cpu__setup_cpunode_map();
 
diff --git a/tools/perf/trace/beauty/arch_errno_names.sh b/tools/perf/trace/beauty/arch_errno_names.sh
index 9f9ea45cddc4..2c5f72fa8108 100755
--- a/tools/perf/trace/beauty/arch_errno_names.sh
+++ b/tools/perf/trace/beauty/arch_errno_names.sh
@@ -87,14 +87,13 @@ cat <<EoHEADER
 
 EoHEADER
 
-# Create list of architectures and ignore those that do not appear
-# in tools/perf/arch
+# Create list of architectures that have a specific errno.h.
 archlist=""
-for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | grep -v x86 | sort); do
-	test -d $toolsdir/perf/arch/$arch && archlist="$archlist $arch"
+for arch in $(find $toolsdir/arch -maxdepth 1 -mindepth 1 -type d -printf "%f\n" | sort -r); do
+	test -f $toolsdir/arch/$arch/include/uapi/asm/errno.h && archlist="$archlist $arch"
 done
 
-for arch in x86 $archlist generic; do
+for arch in generic $archlist; do
 	process_arch "$arch"
 done
-create_arch_errno_table_func "x86 $archlist" "generic"
+create_arch_errno_table_func "$archlist" "generic"
diff --git a/tools/perf/ui/browsers/annotate.c b/tools/perf/ui/browsers/annotate.c
index 701130ad43a2..ef4da4295bf7 100644
--- a/tools/perf/ui/browsers/annotate.c
+++ b/tools/perf/ui/browsers/annotate.c
@@ -966,6 +966,7 @@ int symbol__tui_annotate(struct map_symbol *ms, struct evsel *evsel,
 	err = symbol__annotate2(ms, evsel, opts, &browser.arch);
 	if (err) {
 		char msg[BUFSIZ];
+		ms->map->dso->annotate_warned = true;
 		symbol__strerror_disassemble(ms, err, msg, sizeof(msg));
 		ui__error("Couldn't annotate %s:\n%s", sym->name, msg);
 		goto out_free_offsets;
diff --git a/tools/perf/ui/gtk/annotate.c b/tools/perf/ui/gtk/annotate.c
index 94167bfed722..0a50e962f9a3 100644
--- a/tools/perf/ui/gtk/annotate.c
+++ b/tools/perf/ui/gtk/annotate.c
@@ -177,6 +177,7 @@ static int symbol__gtk_annotate(struct map_symbol *ms, struct evsel *evsel,
 	err = symbol__annotate(ms, evsel, &annotation__default_options, NULL);
 	if (err) {
 		char msg[BUFSIZ];
+		ms->map->dso->annotate_warned = true;
 		symbol__strerror_disassemble(ms, err, msg, sizeof(msg));
 		ui__error("Couldn't annotate %s: %s\n", sym->name, msg);
 		return -1;
diff --git a/tools/perf/util/affinity.c b/tools/perf/util/affinity.c
index a5e31f826828..7b12bd7a3080 100644
--- a/tools/perf/util/affinity.c
+++ b/tools/perf/util/affinity.c
@@ -25,11 +25,11 @@ int affinity__setup(struct affinity *a)
 {
 	int cpu_set_size = get_cpu_set_size();
 
-	a->orig_cpus = bitmap_alloc(cpu_set_size * 8);
+	a->orig_cpus = bitmap_zalloc(cpu_set_size * 8);
 	if (!a->orig_cpus)
 		return -1;
 	sched_getaffinity(0, cpu_set_size, (cpu_set_t *)a->orig_cpus);
-	a->sched_cpus = bitmap_alloc(cpu_set_size * 8);
+	a->sched_cpus = bitmap_zalloc(cpu_set_size * 8);
 	if (!a->sched_cpus) {
 		zfree(&a->orig_cpus);
 		return -1;
diff --git a/tools/perf/util/annotate.c b/tools/perf/util/annotate.c
index aa04a3655236..0bae061b2d6d 100644
--- a/tools/perf/util/annotate.c
+++ b/tools/perf/util/annotate.c
@@ -1833,7 +1833,7 @@ static int symbol__disassemble_bpf(struct symbol *sym,
 	ret = 0;
 out:
 	free(prog_linfo);
-	free(btf);
+	btf__free(btf);
 	fclose(s);
 	bfd_close(bfdf);
 	return ret;
@@ -2192,8 +2192,10 @@ int symbol__annotate(struct map_symbol *ms, struct evsel *evsel,
 		return errno;
 
 	args.arch = arch = arch__find(arch_name);
-	if (arch == NULL)
+	if (arch == NULL) {
+		pr_err("%s: unsupported arch %s\n", __func__, arch_name);
 		return ENOTSUP;
+	}
 
 	if (parch)
 		*parch = arch;
@@ -2787,9 +2789,17 @@ int symbol__tty_annotate2(struct map_symbol *ms, struct evsel *evsel,
 	struct rb_root source_line = RB_ROOT;
 	struct hists *hists = evsel__hists(evsel);
 	char buf[1024];
+	int err;
 
-	if (symbol__annotate2(ms, evsel, opts, NULL) < 0)
+	err = symbol__annotate2(ms, evsel, opts, NULL);
+	if (err) {
+		char msg[BUFSIZ];
+
+		dso->annotate_warned = true;
+		symbol__strerror_disassemble(ms, err, msg, sizeof(msg));
+		ui__error("Couldn't annotate %s:\n%s", sym->name, msg);
 		return -1;
+	}
 
 	if (opts->print_lines) {
 		srcline_full_filename = opts->full_path;
@@ -2813,9 +2823,17 @@ int symbol__tty_annotate(struct map_symbol *ms, struct evsel *evsel,
 	struct dso *dso = ms->map->dso;
 	struct symbol *sym = ms->sym;
 	struct rb_root source_line = RB_ROOT;
+	int err;
+
+	err = symbol__annotate(ms, evsel, opts, NULL);
+	if (err) {
+		char msg[BUFSIZ];
 
-	if (symbol__annotate(ms, evsel, opts, NULL) < 0)
+		dso->annotate_warned = true;
+		symbol__strerror_disassemble(ms, err, msg, sizeof(msg));
+		ui__error("Couldn't annotate %s:\n%s", sym->name, msg);
 		return -1;
+	}
 
 	symbol__calc_percent(sym, evsel);
 
diff --git a/tools/perf/util/auxtrace.c b/tools/perf/util/auxtrace.c
index cb19669d2a5b..8d2865b9ade2 100644
--- a/tools/perf/util/auxtrace.c
+++ b/tools/perf/util/auxtrace.c
@@ -130,11 +130,6 @@ int auxtrace_mmap__mmap(struct auxtrace_mmap *mm,
 		return 0;
 	}
 
-#if BITS_PER_LONG != 64 && !defined(HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT)
-	pr_err("Cannot use AUX area tracing mmaps\n");
-	return -1;
-#endif
-
 	pc->aux_offset = mp->offset;
 	pc->aux_size = mp->len;
 
@@ -1674,6 +1669,82 @@ int perf_event__process_auxtrace_error(struct perf_session *session,
 	return 0;
 }
 
+/*
+ * In the compat mode kernel runs in 64-bit and perf tool runs in 32-bit mode,
+ * 32-bit perf tool cannot access 64-bit value atomically, which might lead to
+ * the issues caused by the below sequence on multiple CPUs: when perf tool
+ * accesses either the load operation or the store operation for 64-bit value,
+ * on some architectures the operation is divided into two instructions, one
+ * is for accessing the low 32-bit value and another is for the high 32-bit;
+ * thus these two user operations can give the kernel chances to access the
+ * 64-bit value, and thus leads to the unexpected load values.
+ *
+ *   kernel (64-bit)                        user (32-bit)
+ *
+ *   if (LOAD ->aux_tail) { --,             LOAD ->aux_head_lo
+ *       STORE $aux_data      |       ,--->
+ *       FLUSH $aux_data      |       |     LOAD ->aux_head_hi
+ *       STORE ->aux_head   --|-------`     smp_rmb()
+ *   }                        |             LOAD $data
+ *                            |             smp_mb()
+ *                            |             STORE ->aux_tail_lo
+ *                            `----------->
+ *                                          STORE ->aux_tail_hi
+ *
+ * For this reason, it's impossible for the perf tool to work correctly when
+ * the AUX head or tail is bigger than 4GB (more than 32 bits length); and we
+ * can not simply limit the AUX ring buffer to less than 4GB, the reason is
+ * the pointers can be increased monotonically, whatever the buffer size it is,
+ * at the end the head and tail can be bigger than 4GB and carry out to the
+ * high 32-bit.
+ *
+ * To mitigate the issues and improve the user experience, we can allow the
+ * perf tool working in certain conditions and bail out with error if detect
+ * any overflow cannot be handled.
+ *
+ * For reading the AUX head, it reads out the values for three times, and
+ * compares the high 4 bytes of the values between the first time and the last
+ * time, if there has no change for high 4 bytes injected by the kernel during
+ * the user reading sequence, it's safe for use the second value.
+ *
+ * When compat_auxtrace_mmap__write_tail() detects any carrying in the high
+ * 32 bits, it means there have two store operations in user space and it cannot
+ * promise the atomicity for 64-bit write, so return '-1' in this case to tell
+ * the caller an overflow error has happened.
+ */
+u64 __weak compat_auxtrace_mmap__read_head(struct auxtrace_mmap *mm)
+{
+	struct perf_event_mmap_page *pc = mm->userpg;
+	u64 first, second, last;
+	u64 mask = (u64)(UINT32_MAX) << 32;
+
+	do {
+		first = READ_ONCE(pc->aux_head);
+		/* Ensure all reads are done after we read the head */
+		smp_rmb();
+		second = READ_ONCE(pc->aux_head);
+		/* Ensure all reads are done after we read the head */
+		smp_rmb();
+		last = READ_ONCE(pc->aux_head);
+	} while ((first & mask) != (last & mask));
+
+	return second;
+}
+
+int __weak compat_auxtrace_mmap__write_tail(struct auxtrace_mmap *mm, u64 tail)
+{
+	struct perf_event_mmap_page *pc = mm->userpg;
+	u64 mask = (u64)(UINT32_MAX) << 32;
+
+	if (tail & mask)
+		return -1;
+
+	/* Ensure all reads are done before we write the tail out */
+	smp_mb();
+	WRITE_ONCE(pc->aux_tail, tail);
+	return 0;
+}
+
 static int __auxtrace_mmap__read(struct mmap *map,
 				 struct auxtrace_record *itr,
 				 struct perf_tool *tool, process_auxtrace_t fn,
@@ -1685,15 +1756,13 @@ static int __auxtrace_mmap__read(struct mmap *map,
 	size_t size, head_off, old_off, len1, len2, padding;
 	union perf_event ev;
 	void *data1, *data2;
+	int kernel_is_64_bit = perf_env__kernel_is_64_bit(evsel__env(NULL));
 
-	if (snapshot) {
-		head = auxtrace_mmap__read_snapshot_head(mm);
-		if (auxtrace_record__find_snapshot(itr, mm->idx, mm, data,
-						   &head, &old))
-			return -1;
-	} else {
-		head = auxtrace_mmap__read_head(mm);
-	}
+	head = auxtrace_mmap__read_head(mm, kernel_is_64_bit);
+
+	if (snapshot &&
+	    auxtrace_record__find_snapshot(itr, mm->idx, mm, data, &head, &old))
+		return -1;
 
 	if (old == head)
 		return 0;
@@ -1772,10 +1841,13 @@ static int __auxtrace_mmap__read(struct mmap *map,
 	mm->prev = head;
 
 	if (!snapshot) {
-		auxtrace_mmap__write_tail(mm, head);
-		if (itr->read_finish) {
-			int err;
+		int err;
 
+		err = auxtrace_mmap__write_tail(mm, head, kernel_is_64_bit);
+		if (err < 0)
+			return err;
+
+		if (itr->read_finish) {
 			err = itr->read_finish(itr, mm->idx);
 			if (err < 0)
 				return err;
diff --git a/tools/perf/util/auxtrace.h b/tools/perf/util/auxtrace.h
index cc1c1b9cec9c..5f383908ca6e 100644
--- a/tools/perf/util/auxtrace.h
+++ b/tools/perf/util/auxtrace.h
@@ -440,52 +440,39 @@ struct auxtrace_cache;
 
 #ifdef HAVE_AUXTRACE_SUPPORT
 
-/*
- * In snapshot mode the mmapped page is read-only which makes using
- * __sync_val_compare_and_swap() problematic.  However, snapshot mode expects
- * the buffer is not updated while the snapshot is made (e.g. Intel PT disables
- * the event) so there is not a race anyway.
- */
-static inline u64 auxtrace_mmap__read_snapshot_head(struct auxtrace_mmap *mm)
-{
-	struct perf_event_mmap_page *pc = mm->userpg;
-	u64 head = READ_ONCE(pc->aux_head);
-
-	/* Ensure all reads are done after we read the head */
-	smp_rmb();
-	return head;
-}
+u64 compat_auxtrace_mmap__read_head(struct auxtrace_mmap *mm);
+int compat_auxtrace_mmap__write_tail(struct auxtrace_mmap *mm, u64 tail);
 
-static inline u64 auxtrace_mmap__read_head(struct auxtrace_mmap *mm)
+static inline u64 auxtrace_mmap__read_head(struct auxtrace_mmap *mm,
+					   int kernel_is_64_bit __maybe_unused)
 {
 	struct perf_event_mmap_page *pc = mm->userpg;
-#if BITS_PER_LONG == 64 || !defined(HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT)
-	u64 head = READ_ONCE(pc->aux_head);
-#else
-	u64 head = __sync_val_compare_and_swap(&pc->aux_head, 0, 0);
+	u64 head;
+
+#if BITS_PER_LONG == 32
+	if (kernel_is_64_bit)
+		return compat_auxtrace_mmap__read_head(mm);
 #endif
+	head = READ_ONCE(pc->aux_head);
 
 	/* Ensure all reads are done after we read the head */
 	smp_rmb();
 	return head;
 }
 
-static inline void auxtrace_mmap__write_tail(struct auxtrace_mmap *mm, u64 tail)
+static inline int auxtrace_mmap__write_tail(struct auxtrace_mmap *mm, u64 tail,
+					    int kernel_is_64_bit __maybe_unused)
 {
 	struct perf_event_mmap_page *pc = mm->userpg;
-#if BITS_PER_LONG != 64 && defined(HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT)
-	u64 old_tail;
-#endif
 
+#if BITS_PER_LONG == 32
+	if (kernel_is_64_bit)
+		return compat_auxtrace_mmap__write_tail(mm, tail);
+#endif
 	/* Ensure all reads are done before we write the tail out */
 	smp_mb();
-#if BITS_PER_LONG == 64 || !defined(HAVE_SYNC_COMPARE_AND_SWAP_SUPPORT)
-	pc->aux_tail = tail;
-#else
-	do {
-		old_tail = __sync_val_compare_and_swap(&pc->aux_tail, 0, 0);
-	} while (!__sync_bool_compare_and_swap(&pc->aux_tail, old_tail, tail));
-#endif
+	WRITE_ONCE(pc->aux_tail, tail);
+	return 0;
 }
 
 int auxtrace_mmap__mmap(struct auxtrace_mmap *mm,
diff --git a/tools/perf/util/config.c b/tools/perf/util/config.c
index 63d472b336de..4fb5e90d7a57 100644
--- a/tools/perf/util/config.c
+++ b/tools/perf/util/config.c
@@ -581,7 +581,10 @@ const char *perf_home_perfconfig(void)
 	static const char *config;
 	static bool failed;
 
-	config = failed ? NULL : home_perfconfig();
+	if (failed || config)
+		return config;
+
+	config = home_perfconfig();
 	if (!config)
 		failed = true;
 
diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
index 3e1a05bc82cc..31fa3b45134a 100644
--- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
+++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.c
@@ -13,8 +13,6 @@
 #include <linux/zalloc.h>
 #include <stdlib.h>
 #include <opencsd/c_api/opencsd_c_api.h>
-#include <opencsd/etmv4/trc_pkt_types_etmv4.h>
-#include <opencsd/ocsd_if_types.h>
 
 #include "cs-etm.h"
 #include "cs-etm-decoder.h"
@@ -35,9 +33,11 @@
 struct cs_etm_decoder {
 	void *data;
 	void (*packet_printer)(const char *msg);
+	bool suppress_printing;
 	dcd_tree_handle_t dcd_tree;
 	cs_etm_mem_cb_type mem_access;
 	ocsd_datapath_resp_t prev_return;
+	const char *decoder_name;
 };
 
 static u32
@@ -74,9 +74,10 @@ int cs_etm_decoder__reset(struct cs_etm_decoder *decoder)
 	ocsd_datapath_resp_t dp_ret;
 
 	decoder->prev_return = OCSD_RESP_CONT;
-
+	decoder->suppress_printing = true;
 	dp_ret = ocsd_dt_process_data(decoder->dcd_tree, OCSD_OP_RESET,
 				      0, 0, NULL, NULL);
+	decoder->suppress_printing = false;
 	if (OCSD_DATA_RESP_IS_FATAL(dp_ret))
 		return -1;
 
@@ -124,6 +125,21 @@ static int cs_etm_decoder__gen_etmv3_config(struct cs_etm_trace_params *params,
 	return 0;
 }
 
+#define TRCIDR1_TRCARCHMIN_SHIFT 4
+#define TRCIDR1_TRCARCHMIN_MASK  GENMASK(7, 4)
+#define TRCIDR1_TRCARCHMIN(x)    (((x) & TRCIDR1_TRCARCHMIN_MASK) >> TRCIDR1_TRCARCHMIN_SHIFT)
+
+static enum _ocsd_arch_version cs_etm_decoder__get_etmv4_arch_ver(u32 reg_idr1)
+{
+	/*
+	 * For ETMv4 if the trace minor version is 4 or more then we can assume
+	 * the architecture is ARCH_AA64 rather than just V8.
+	 * ARCH_V8 = V8 architecture
+	 * ARCH_AA64 = Min v8r3 plus additional AA64 PE features
+	 */
+	return TRCIDR1_TRCARCHMIN(reg_idr1) >= 4 ? ARCH_AA64 : ARCH_V8;
+}
+
 static void cs_etm_decoder__gen_etmv4_config(struct cs_etm_trace_params *params,
 					     ocsd_etmv4_cfg *config)
 {
@@ -138,7 +154,21 @@ static void cs_etm_decoder__gen_etmv4_config(struct cs_etm_trace_params *params,
 	config->reg_idr11 = 0;
 	config->reg_idr12 = 0;
 	config->reg_idr13 = 0;
-	config->arch_ver = ARCH_V8;
+	config->arch_ver = cs_etm_decoder__get_etmv4_arch_ver(params->etmv4.reg_idr1);
+	config->core_prof = profile_CortexA;
+}
+
+static void cs_etm_decoder__gen_ete_config(struct cs_etm_trace_params *params,
+					   ocsd_ete_cfg *config)
+{
+	config->reg_configr = params->ete.reg_configr;
+	config->reg_traceidr = params->ete.reg_traceidr;
+	config->reg_idr0 = params->ete.reg_idr0;
+	config->reg_idr1 = params->ete.reg_idr1;
+	config->reg_idr2 = params->ete.reg_idr2;
+	config->reg_idr8 = params->ete.reg_idr8;
+	config->reg_devarch = params->ete.reg_devarch;
+	config->arch_ver = ARCH_AA64;
 	config->core_prof = profile_CortexA;
 }
 
@@ -146,8 +176,10 @@ static void cs_etm_decoder__print_str_cb(const void *p_context,
 					 const char *msg,
 					 const int str_len)
 {
-	if (p_context && str_len)
-		((struct cs_etm_decoder *)p_context)->packet_printer(msg);
+	const struct cs_etm_decoder *decoder = p_context;
+
+	if (p_context && str_len && !decoder->suppress_printing)
+		decoder->packet_printer(msg);
 }
 
 static int
@@ -223,55 +255,6 @@ cs_etm_decoder__init_raw_frame_logging(
 }
 #endif
 
-static int cs_etm_decoder__create_packet_printer(struct cs_etm_decoder *decoder,
-						 const char *decoder_name,
-						 void *trace_config)
-{
-	u8 csid;
-
-	if (ocsd_dt_create_decoder(decoder->dcd_tree, decoder_name,
-				   OCSD_CREATE_FLG_PACKET_PROC,
-				   trace_config, &csid))
-		return -1;
-
-	if (ocsd_dt_set_pkt_protocol_printer(decoder->dcd_tree, csid, 0))
-		return -1;
-
-	return 0;
-}
-
-static int
-cs_etm_decoder__create_etm_packet_printer(struct cs_etm_trace_params *t_params,
-					  struct cs_etm_decoder *decoder)
-{
-	const char *decoder_name;
-	ocsd_etmv3_cfg config_etmv3;
-	ocsd_etmv4_cfg trace_config_etmv4;
-	void *trace_config;
-
-	switch (t_params->protocol) {
-	case CS_ETM_PROTO_ETMV3:
-	case CS_ETM_PROTO_PTM:
-		cs_etm_decoder__gen_etmv3_config(t_params, &config_etmv3);
-		decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ?
-							OCSD_BUILTIN_DCD_ETMV3 :
-							OCSD_BUILTIN_DCD_PTM;
-		trace_config = &config_etmv3;
-		break;
-	case CS_ETM_PROTO_ETMV4i:
-		cs_etm_decoder__gen_etmv4_config(t_params, &trace_config_etmv4);
-		decoder_name = OCSD_BUILTIN_DCD_ETMV4I;
-		trace_config = &trace_config_etmv4;
-		break;
-	default:
-		return -1;
-	}
-
-	return cs_etm_decoder__create_packet_printer(decoder,
-						     decoder_name,
-						     trace_config);
-}
-
 static ocsd_datapath_resp_t
 cs_etm_decoder__do_soft_timestamp(struct cs_etm_queue *etmq,
 				  struct cs_etm_packet_queue *packet_queue,
@@ -324,8 +307,11 @@ cs_etm_decoder__do_hard_timestamp(struct cs_etm_queue *etmq,
 		 * underflow.
 		 */
 		packet_queue->cs_timestamp = 0;
-		WARN_ONCE(true, "Zero Coresight timestamp found at Idx:%" OCSD_TRC_IDX_STR
-				". Decoding may be improved with --itrace=Z...\n", indx);
+		if (!cs_etm__etmq_is_timeless(etmq))
+			pr_warning_once("Zero Coresight timestamp found at Idx:%" OCSD_TRC_IDX_STR
+					". Decoding may be improved by prepending 'Z' to your current --itrace arguments.\n",
+					indx);
+
 	} else if (packet_queue->instr_count > elem->timestamp) {
 		/*
 		 * Sanity check that the elem->timestamp - packet_queue->instr_count would not
@@ -625,13 +611,14 @@ static ocsd_datapath_resp_t cs_etm_decoder__gen_trace_elem_printer(
 	return resp;
 }
 
-static int cs_etm_decoder__create_etm_packet_decoder(
-					struct cs_etm_trace_params *t_params,
-					struct cs_etm_decoder *decoder)
+static int
+cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params,
+				   struct cs_etm_trace_params *t_params,
+				   struct cs_etm_decoder *decoder)
 {
-	const char *decoder_name;
 	ocsd_etmv3_cfg config_etmv3;
 	ocsd_etmv4_cfg trace_config_etmv4;
+	ocsd_ete_cfg trace_config_ete;
 	void *trace_config;
 	u8 csid;
 
@@ -639,51 +626,55 @@ static int cs_etm_decoder__create_etm_packet_decoder(
 	case CS_ETM_PROTO_ETMV3:
 	case CS_ETM_PROTO_PTM:
 		cs_etm_decoder__gen_etmv3_config(t_params, &config_etmv3);
-		decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ?
+		decoder->decoder_name = (t_params->protocol == CS_ETM_PROTO_ETMV3) ?
 							OCSD_BUILTIN_DCD_ETMV3 :
 							OCSD_BUILTIN_DCD_PTM;
 		trace_config = &config_etmv3;
 		break;
 	case CS_ETM_PROTO_ETMV4i:
 		cs_etm_decoder__gen_etmv4_config(t_params, &trace_config_etmv4);
-		decoder_name = OCSD_BUILTIN_DCD_ETMV4I;
+		decoder->decoder_name = OCSD_BUILTIN_DCD_ETMV4I;
 		trace_config = &trace_config_etmv4;
 		break;
+	case CS_ETM_PROTO_ETE:
+		cs_etm_decoder__gen_ete_config(t_params, &trace_config_ete);
+		decoder->decoder_name = OCSD_BUILTIN_DCD_ETE;
+		trace_config = &trace_config_ete;
+		break;
 	default:
 		return -1;
 	}
 
-	if (ocsd_dt_create_decoder(decoder->dcd_tree,
-				     decoder_name,
-				     OCSD_CREATE_FLG_FULL_DECODER,
-				     trace_config, &csid))
-		return -1;
+	if (d_params->operation == CS_ETM_OPERATION_DECODE) {
+		if (ocsd_dt_create_decoder(decoder->dcd_tree,
+					   decoder->decoder_name,
+					   OCSD_CREATE_FLG_FULL_DECODER,
+					   trace_config, &csid))
+			return -1;
 
-	if (ocsd_dt_set_gen_elem_outfn(decoder->dcd_tree,
-				       cs_etm_decoder__gen_trace_elem_printer,
-				       decoder))
-		return -1;
+		if (ocsd_dt_set_gen_elem_outfn(decoder->dcd_tree,
+					       cs_etm_decoder__gen_trace_elem_printer,
+					       decoder))
+			return -1;
 
-	return 0;
-}
+		return 0;
+	} else if (d_params->operation == CS_ETM_OPERATION_PRINT) {
+		if (ocsd_dt_create_decoder(decoder->dcd_tree, decoder->decoder_name,
+					   OCSD_CREATE_FLG_PACKET_PROC,
+					   trace_config, &csid))
+			return -1;
 
-static int
-cs_etm_decoder__create_etm_decoder(struct cs_etm_decoder_params *d_params,
-				   struct cs_etm_trace_params *t_params,
-				   struct cs_etm_decoder *decoder)
-{
-	if (d_params->operation == CS_ETM_OPERATION_PRINT)
-		return cs_etm_decoder__create_etm_packet_printer(t_params,
-								 decoder);
-	else if (d_params->operation == CS_ETM_OPERATION_DECODE)
-		return cs_etm_decoder__create_etm_packet_decoder(t_params,
-								 decoder);
+		if (ocsd_dt_set_pkt_protocol_printer(decoder->dcd_tree, csid, 0))
+			return -1;
+
+		return 0;
+	}
 
 	return -1;
 }
 
 struct cs_etm_decoder *
-cs_etm_decoder__new(int num_cpu, struct cs_etm_decoder_params *d_params,
+cs_etm_decoder__new(int decoders, struct cs_etm_decoder_params *d_params,
 		    struct cs_etm_trace_params t_params[])
 {
 	struct cs_etm_decoder *decoder;
@@ -728,7 +719,7 @@ cs_etm_decoder__new(int num_cpu, struct cs_etm_decoder_params *d_params,
 	/* init raw frame logging if required */
 	cs_etm_decoder__init_raw_frame_logging(d_params, decoder);
 
-	for (i = 0; i < num_cpu; i++) {
+	for (i = 0; i < decoders; i++) {
 		ret = cs_etm_decoder__create_etm_decoder(d_params,
 							 &t_params[i],
 							 decoder);
@@ -800,3 +791,8 @@ void cs_etm_decoder__free(struct cs_etm_decoder *decoder)
 	decoder->dcd_tree = NULL;
 	free(decoder);
 }
+
+const char *cs_etm_decoder__get_name(struct cs_etm_decoder *decoder)
+{
+	return decoder->decoder_name;
+}
diff --git a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
index 11f3391d06f2..92a855fbe5b8 100644
--- a/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
+++ b/tools/perf/util/cs-etm-decoder/cs-etm-decoder.h
@@ -37,11 +37,22 @@ struct cs_etmv4_trace_params {
 	u32 reg_traceidr;
 };
 
+struct cs_ete_trace_params {
+	u32 reg_idr0;
+	u32 reg_idr1;
+	u32 reg_idr2;
+	u32 reg_idr8;
+	u32 reg_configr;
+	u32 reg_traceidr;
+	u32 reg_devarch;
+};
+
 struct cs_etm_trace_params {
 	int protocol;
 	union {
 		struct cs_etmv3_trace_params etmv3;
 		struct cs_etmv4_trace_params etmv4;
+		struct cs_ete_trace_params ete;
 	};
 };
 
@@ -65,6 +76,7 @@ enum {
 	CS_ETM_PROTO_ETMV4i,
 	CS_ETM_PROTO_ETMV4d,
 	CS_ETM_PROTO_PTM,
+	CS_ETM_PROTO_ETE
 };
 
 enum cs_etm_decoder_operation {
@@ -92,5 +104,6 @@ int cs_etm_decoder__get_packet(struct cs_etm_packet_queue *packet_queue,
 			       struct cs_etm_packet *packet);
 
 int cs_etm_decoder__reset(struct cs_etm_decoder *decoder);
+const char *cs_etm_decoder__get_name(struct cs_etm_decoder *decoder);
 
 #endif /* INCLUDE__CS_ETM_DECODER_H__ */
diff --git a/tools/perf/util/cs-etm.c b/tools/perf/util/cs-etm.c
index bc1f64873c8f..f323adb1af85 100644
--- a/tools/perf/util/cs-etm.c
+++ b/tools/perf/util/cs-etm.c
@@ -62,7 +62,6 @@ struct cs_etm_auxtrace {
 	u64 instructions_sample_period;
 	u64 instructions_id;
 	u64 **metadata;
-	u64 kernel_start;
 	unsigned int pmu_type;
 };
 
@@ -97,7 +96,6 @@ struct cs_etm_queue {
 /* RB tree for quick conversion between traceID and metadata pointers */
 static struct intlist *traceid_list;
 
-static int cs_etm__update_queues(struct cs_etm_auxtrace *etm);
 static int cs_etm__process_queues(struct cs_etm_auxtrace *etm);
 static int cs_etm__process_timeless_queues(struct cs_etm_auxtrace *etm,
 					   pid_t tid);
@@ -462,14 +460,30 @@ static void cs_etm__set_trace_param_etmv4(struct cs_etm_trace_params *t_params,
 	t_params[idx].etmv4.reg_traceidr = metadata[idx][CS_ETMV4_TRCTRACEIDR];
 }
 
+static void cs_etm__set_trace_param_ete(struct cs_etm_trace_params *t_params,
+					  struct cs_etm_auxtrace *etm, int idx)
+{
+	u64 **metadata = etm->metadata;
+
+	t_params[idx].protocol = CS_ETM_PROTO_ETE;
+	t_params[idx].ete.reg_idr0 = metadata[idx][CS_ETMV4_TRCIDR0];
+	t_params[idx].ete.reg_idr1 = metadata[idx][CS_ETMV4_TRCIDR1];
+	t_params[idx].ete.reg_idr2 = metadata[idx][CS_ETMV4_TRCIDR2];
+	t_params[idx].ete.reg_idr8 = metadata[idx][CS_ETMV4_TRCIDR8];
+	t_params[idx].ete.reg_configr = metadata[idx][CS_ETMV4_TRCCONFIGR];
+	t_params[idx].ete.reg_traceidr = metadata[idx][CS_ETMV4_TRCTRACEIDR];
+	t_params[idx].ete.reg_devarch = metadata[idx][CS_ETE_TRCDEVARCH];
+}
+
 static int cs_etm__init_trace_params(struct cs_etm_trace_params *t_params,
-				     struct cs_etm_auxtrace *etm)
+				     struct cs_etm_auxtrace *etm,
+				     int decoders)
 {
 	int i;
 	u32 etmidr;
 	u64 architecture;
 
-	for (i = 0; i < etm->num_cpu; i++) {
+	for (i = 0; i < decoders; i++) {
 		architecture = etm->metadata[i][CS_ETM_MAGIC];
 
 		switch (architecture) {
@@ -480,6 +494,9 @@ static int cs_etm__init_trace_params(struct cs_etm_trace_params *t_params,
 		case __perf_cs_etmv4_magic:
 			cs_etm__set_trace_param_etmv4(t_params, etm, i);
 			break;
+		case __perf_cs_ete_magic:
+			cs_etm__set_trace_param_ete(t_params, etm, i);
+			break;
 		default:
 			return -EINVAL;
 		}
@@ -490,7 +507,8 @@ static int cs_etm__init_trace_params(struct cs_etm_trace_params *t_params,
 
 static int cs_etm__init_decoder_params(struct cs_etm_decoder_params *d_params,
 				       struct cs_etm_queue *etmq,
-				       enum cs_etm_decoder_operation mode)
+				       enum cs_etm_decoder_operation mode,
+				       bool formatted)
 {
 	int ret = -EINVAL;
 
@@ -500,7 +518,7 @@ static int cs_etm__init_decoder_params(struct cs_etm_decoder_params *d_params,
 	d_params->packet_printer = cs_etm__packet_dump;
 	d_params->operation = mode;
 	d_params->data = etmq;
-	d_params->formatted = true;
+	d_params->formatted = formatted;
 	d_params->fsyncs = false;
 	d_params->hsyncs = false;
 	d_params->frame_aligned = true;
@@ -510,44 +528,23 @@ out:
 	return ret;
 }
 
-static void cs_etm__dump_event(struct cs_etm_auxtrace *etm,
+static void cs_etm__dump_event(struct cs_etm_queue *etmq,
 			       struct auxtrace_buffer *buffer)
 {
 	int ret;
 	const char *color = PERF_COLOR_BLUE;
-	struct cs_etm_decoder_params d_params;
-	struct cs_etm_trace_params *t_params;
-	struct cs_etm_decoder *decoder;
 	size_t buffer_used = 0;
 
 	fprintf(stdout, "\n");
 	color_fprintf(stdout, color,
-		     ". ... CoreSight ETM Trace data: size %zu bytes\n",
-		     buffer->size);
-
-	/* Use metadata to fill in trace parameters for trace decoder */
-	t_params = zalloc(sizeof(*t_params) * etm->num_cpu);
-
-	if (!t_params)
-		return;
-
-	if (cs_etm__init_trace_params(t_params, etm))
-		goto out_free;
+		     ". ... CoreSight %s Trace data: size %zu bytes\n",
+		     cs_etm_decoder__get_name(etmq->decoder), buffer->size);
 
-	/* Set decoder parameters to simply print the trace packets */
-	if (cs_etm__init_decoder_params(&d_params, NULL,
-					CS_ETM_OPERATION_PRINT))
-		goto out_free;
-
-	decoder = cs_etm_decoder__new(etm->num_cpu, &d_params, t_params);
-
-	if (!decoder)
-		goto out_free;
 	do {
 		size_t consumed;
 
 		ret = cs_etm_decoder__process_data_block(
-				decoder, buffer->offset,
+				etmq->decoder, buffer->offset,
 				&((u8 *)buffer->data)[buffer_used],
 				buffer->size - buffer_used, &consumed);
 		if (ret)
@@ -556,16 +553,12 @@ static void cs_etm__dump_event(struct cs_etm_auxtrace *etm,
 		buffer_used += consumed;
 	} while (buffer_used < buffer->size);
 
-	cs_etm_decoder__free(decoder);
-
-out_free:
-	zfree(&t_params);
+	cs_etm_decoder__reset(etmq->decoder);
 }
 
 static int cs_etm__flush_events(struct perf_session *session,
 				struct perf_tool *tool)
 {
-	int ret;
 	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
 						   struct cs_etm_auxtrace,
 						   auxtrace);
@@ -575,11 +568,6 @@ static int cs_etm__flush_events(struct perf_session *session,
 	if (!tool->ordered_events)
 		return -EINVAL;
 
-	ret = cs_etm__update_queues(etm);
-
-	if (ret < 0)
-		return ret;
-
 	if (etm->timeless_decoding)
 		return cs_etm__process_timeless_queues(etm, -1);
 
@@ -691,7 +679,7 @@ static u8 cs_etm__cpu_mode(struct cs_etm_queue *etmq, u64 address)
 
 	machine = etmq->etm->machine;
 
-	if (address >= etmq->etm->kernel_start) {
+	if (address >= machine__kernel_start(machine)) {
 		if (machine__is_host(machine))
 			return PERF_RECORD_MISC_KERNEL;
 		else
@@ -746,17 +734,32 @@ static u32 cs_etm__mem_access(struct cs_etm_queue *etmq, u8 trace_chan_id,
 
 	len = dso__data_read_offset(al.map->dso, machine, offset, buffer, size);
 
-	if (len <= 0)
+	if (len <= 0) {
+		ui__warning_once("CS ETM Trace: Missing DSO. Use 'perf archive' or debuginfod to export data from the traced system.\n"
+				 "              Enable CONFIG_PROC_KCORE or use option '-k /path/to/vmlinux' for kernel symbols.\n");
+		if (!al.map->dso->auxtrace_warned) {
+			pr_err("CS ETM Trace: Debug data not found for address %#"PRIx64" in %s\n",
+				    address,
+				    al.map->dso->long_name ? al.map->dso->long_name : "Unknown");
+			al.map->dso->auxtrace_warned = true;
+		}
 		return 0;
+	}
 
 	return len;
 }
 
-static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm)
+static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm,
+						bool formatted)
 {
 	struct cs_etm_decoder_params d_params;
 	struct cs_etm_trace_params  *t_params = NULL;
 	struct cs_etm_queue *etmq;
+	/*
+	 * Each queue can only contain data from one CPU when unformatted, so only one decoder is
+	 * needed.
+	 */
+	int decoders = formatted ? etm->num_cpu : 1;
 
 	etmq = zalloc(sizeof(*etmq));
 	if (!etmq)
@@ -767,20 +770,23 @@ static struct cs_etm_queue *cs_etm__alloc_queue(struct cs_etm_auxtrace *etm)
 		goto out_free;
 
 	/* Use metadata to fill in trace parameters for trace decoder */
-	t_params = zalloc(sizeof(*t_params) * etm->num_cpu);
+	t_params = zalloc(sizeof(*t_params) * decoders);
 
 	if (!t_params)
 		goto out_free;
 
-	if (cs_etm__init_trace_params(t_params, etm))
+	if (cs_etm__init_trace_params(t_params, etm, decoders))
 		goto out_free;
 
 	/* Set decoder parameters to decode trace packets */
 	if (cs_etm__init_decoder_params(&d_params, etmq,
-					CS_ETM_OPERATION_DECODE))
+					dump_trace ? CS_ETM_OPERATION_PRINT :
+						     CS_ETM_OPERATION_DECODE,
+					formatted))
 		goto out_free;
 
-	etmq->decoder = cs_etm_decoder__new(etm->num_cpu, &d_params, t_params);
+	etmq->decoder = cs_etm_decoder__new(decoders, &d_params,
+					    t_params);
 
 	if (!etmq->decoder)
 		goto out_free;
@@ -808,31 +814,35 @@ out_free:
 
 static int cs_etm__setup_queue(struct cs_etm_auxtrace *etm,
 			       struct auxtrace_queue *queue,
-			       unsigned int queue_nr)
+			       unsigned int queue_nr,
+			       bool formatted)
 {
-	int ret = 0;
-	unsigned int cs_queue_nr;
-	u8 trace_chan_id;
-	u64 cs_timestamp;
 	struct cs_etm_queue *etmq = queue->priv;
 
 	if (list_empty(&queue->head) || etmq)
-		goto out;
+		return 0;
 
-	etmq = cs_etm__alloc_queue(etm);
+	etmq = cs_etm__alloc_queue(etm, formatted);
 
-	if (!etmq) {
-		ret = -ENOMEM;
-		goto out;
-	}
+	if (!etmq)
+		return -ENOMEM;
 
 	queue->priv = etmq;
 	etmq->etm = etm;
 	etmq->queue_nr = queue_nr;
 	etmq->offset = 0;
 
-	if (etm->timeless_decoding)
-		goto out;
+	return 0;
+}
+
+static int cs_etm__queue_first_cs_timestamp(struct cs_etm_auxtrace *etm,
+					    struct cs_etm_queue *etmq,
+					    unsigned int queue_nr)
+{
+	int ret = 0;
+	unsigned int cs_queue_nr;
+	u8 trace_chan_id;
+	u64 cs_timestamp;
 
 	/*
 	 * We are under a CPU-wide trace scenario.  As such we need to know
@@ -896,33 +906,6 @@ out:
 	return ret;
 }
 
-static int cs_etm__setup_queues(struct cs_etm_auxtrace *etm)
-{
-	unsigned int i;
-	int ret;
-
-	if (!etm->kernel_start)
-		etm->kernel_start = machine__kernel_start(etm->machine);
-
-	for (i = 0; i < etm->queues.nr_queues; i++) {
-		ret = cs_etm__setup_queue(etm, &etm->queues.queue_array[i], i);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static int cs_etm__update_queues(struct cs_etm_auxtrace *etm)
-{
-	if (etm->queues.new_data) {
-		etm->queues.new_data = false;
-		return cs_etm__setup_queues(etm);
-	}
-
-	return 0;
-}
-
 static inline
 void cs_etm__copy_last_branch_rb(struct cs_etm_queue *etmq,
 				 struct cs_etm_traceid_queue *tidq)
@@ -2222,13 +2205,27 @@ static int cs_etm__process_timeless_queues(struct cs_etm_auxtrace *etm,
 static int cs_etm__process_queues(struct cs_etm_auxtrace *etm)
 {
 	int ret = 0;
-	unsigned int cs_queue_nr, queue_nr;
+	unsigned int cs_queue_nr, queue_nr, i;
 	u8 trace_chan_id;
 	u64 cs_timestamp;
 	struct auxtrace_queue *queue;
 	struct cs_etm_queue *etmq;
 	struct cs_etm_traceid_queue *tidq;
 
+	/*
+	 * Pre-populate the heap with one entry from each queue so that we can
+	 * start processing in time order across all queues.
+	 */
+	for (i = 0; i < etm->queues.nr_queues; i++) {
+		etmq = etm->queues.queue_array[i].priv;
+		if (!etmq)
+			continue;
+
+		ret = cs_etm__queue_first_cs_timestamp(etm, etmq, i);
+		if (ret)
+			return ret;
+	}
+
 	while (1) {
 		if (!etm->heap.heap_cnt)
 			goto out;
@@ -2382,7 +2379,6 @@ static int cs_etm__process_event(struct perf_session *session,
 				 struct perf_sample *sample,
 				 struct perf_tool *tool)
 {
-	int err = 0;
 	u64 sample_kernel_timestamp;
 	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
 						   struct cs_etm_auxtrace,
@@ -2401,12 +2397,6 @@ static int cs_etm__process_event(struct perf_session *session,
 	else
 		sample_kernel_timestamp = 0;
 
-	if (sample_kernel_timestamp || etm->timeless_decoding) {
-		err = cs_etm__update_queues(etm);
-		if (err)
-			return err;
-	}
-
 	/*
 	 * Don't wait for cs_etm__flush_events() in per-thread/timeless mode to start the decode. We
 	 * need the tid of the PERF_RECORD_EXIT event to assign to the synthesised samples because
@@ -2447,7 +2437,7 @@ static void dump_queued_data(struct cs_etm_auxtrace *etm,
 	for (i = 0; i < etm->queues.nr_queues; ++i)
 		list_for_each_entry(buf, &etm->queues.queue_array[i].head, list)
 			if (buf->reference == event->reference)
-				cs_etm__dump_event(etm, buf);
+				cs_etm__dump_event(etm->queues.queue_array[i].priv, buf);
 }
 
 static int cs_etm__process_auxtrace_event(struct perf_session *session,
@@ -2463,6 +2453,7 @@ static int cs_etm__process_auxtrace_event(struct perf_session *session,
 		int fd = perf_data__fd(session->data);
 		bool is_pipe = perf_data__is_pipe(session->data);
 		int err;
+		int idx = event->auxtrace.idx;
 
 		if (is_pipe)
 			data_offset = 0;
@@ -2477,9 +2468,20 @@ static int cs_etm__process_auxtrace_event(struct perf_session *session,
 		if (err)
 			return err;
 
+		/*
+		 * Knowing if the trace is formatted or not requires a lookup of
+		 * the aux record so only works in non-piped mode where data is
+		 * queued in cs_etm__queue_aux_records(). Always assume
+		 * formatted in piped mode (true).
+		 */
+		err = cs_etm__setup_queue(etm, &etm->queues.queue_array[idx],
+					  idx, true);
+		if (err)
+			return err;
+
 		if (dump_trace)
 			if (auxtrace_buffer__get_data(buffer, fd)) {
-				cs_etm__dump_event(etm, buffer);
+				cs_etm__dump_event(etm->queues.queue_array[idx].priv, buffer);
 				auxtrace_buffer__put_data(buffer);
 			}
 	} else if (dump_trace)
@@ -2537,6 +2539,7 @@ static const char * const cs_etmv4_priv_fmts[] = {
 	[CS_ETMV4_TRCIDR2]	= "	TRCIDR2			       %llx\n",
 	[CS_ETMV4_TRCIDR8]	= "	TRCIDR8			       %llx\n",
 	[CS_ETMV4_TRCAUTHSTATUS] = "	TRCAUTHSTATUS		       %llx\n",
+	[CS_ETE_TRCDEVARCH]	= "	TRCDEVARCH                     %llx\n"
 };
 
 static const char * const param_unk_fmt =
@@ -2596,10 +2599,15 @@ static int cs_etm__print_cpu_metadata_v1(__u64 *val, int *offset)
 			else
 				fprintf(stdout, cs_etm_priv_fmts[j], val[i]);
 		}
-	} else if (magic == __perf_cs_etmv4_magic) {
+	} else if (magic == __perf_cs_etmv4_magic || magic == __perf_cs_ete_magic) {
+		/*
+		 * ETE and ETMv4 can be printed in the same block because the number of parameters
+		 * is saved and they share the list of parameter names. ETE is also only supported
+		 * in V1 files.
+		 */
 		for (j = 0; j < total_params; j++, i++) {
 			/* if newer record - could be excess params */
-			if (j >= CS_ETMV4_PRIV_MAX)
+			if (j >= CS_ETE_PRIV_MAX)
 				fprintf(stdout, param_unk_fmt, j, val[i]);
 			else
 				fprintf(stdout, cs_etmv4_priv_fmts[j], val[i]);
@@ -2719,6 +2727,8 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o
 	struct perf_record_auxtrace *auxtrace_event;
 	union perf_event auxtrace_fragment;
 	__u64 aux_offset, aux_size;
+	__u32 idx;
+	bool formatted;
 
 	struct cs_etm_auxtrace *etm = container_of(session->auxtrace,
 						   struct cs_etm_auxtrace,
@@ -2780,8 +2790,15 @@ static int cs_etm__queue_aux_fragment(struct perf_session *session, off_t file_o
 
 		pr_debug3("CS ETM: Queue buffer size: %#"PRI_lx64" offset: %#"PRI_lx64
 			  " tid: %d cpu: %d\n", aux_size, aux_offset, sample->tid, sample->cpu);
-		return auxtrace_queues__add_event(&etm->queues, session, &auxtrace_fragment,
-						  file_offset, NULL);
+		err = auxtrace_queues__add_event(&etm->queues, session, &auxtrace_fragment,
+						 file_offset, NULL);
+		if (err)
+			return err;
+
+		idx = auxtrace_event->idx;
+		formatted = !(aux_event->flags & PERF_AUX_FLAG_CORESIGHT_FORMAT_RAW);
+		return cs_etm__setup_queue(etm, &etm->queues.queue_array[idx],
+					   idx, formatted);
 	}
 
 	/* Wasn't inside this buffer, but there were no parse errors. 1 == 'not found' */
@@ -2959,6 +2976,16 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 
 			/* The traceID is our handle */
 			trcidr_idx = CS_ETMV4_TRCTRACEIDR;
+		} else if (ptr[i] == __perf_cs_ete_magic) {
+			metadata[j] = cs_etm__create_meta_blk(ptr, &i, CS_ETE_PRIV_MAX, -1);
+
+			/* ETE shares first part of metadata with ETMv4 */
+			trcidr_idx = CS_ETMV4_TRCTRACEIDR;
+		} else {
+			ui__error("CS ETM Trace: Unrecognised magic number %#"PRIx64". File could be from a newer version of perf.\n",
+				  ptr[i]);
+			err = -EINVAL;
+			goto err_free_metadata;
 		}
 
 		if (!metadata[j]) {
@@ -3070,6 +3097,13 @@ int cs_etm__process_auxtrace_info(union perf_event *event,
 		goto err_delete_thread;
 
 	etm->data_queued = etm->queues.populated;
+	/*
+	 * Print warning in pipe mode, see cs_etm__process_auxtrace_event() and
+	 * cs_etm__queue_aux_fragment() for details relating to limitations.
+	 */
+	if (!etm->data_queued)
+		pr_warning("CS ETM warning: Coresight decode and TRBE support requires random file access.\n"
+			   "Continuing with best effort decoding in piped mode.\n\n");
 
 	return 0;
 
diff --git a/tools/perf/util/cs-etm.h b/tools/perf/util/cs-etm.h
index d65c7b19407d..90c83f932d9a 100644
--- a/tools/perf/util/cs-etm.h
+++ b/tools/perf/util/cs-etm.h
@@ -77,6 +77,15 @@ enum {
 #define CS_ETMV4_NR_TRC_PARAMS_V0 (CS_ETMV4_TRCAUTHSTATUS - CS_ETMV4_TRCCONFIGR + 1)
 
 /*
+ * ETE metadata is ETMv4 plus TRCDEVARCH register and doesn't support header V0 since it was
+ * added in header V1
+ */
+enum {
+	CS_ETE_TRCDEVARCH = CS_ETMV4_PRIV_MAX,
+	CS_ETE_PRIV_MAX
+};
+
+/*
  * ETMv3 exception encoding number:
  * See Embedded Trace Macrocell specification (ARM IHI 0014Q)
  * table 7-12 Encoding of Exception[3:0] for non-ARMv7-M processors.
@@ -187,8 +196,10 @@ struct cs_etm_packet_queue {
 
 #define __perf_cs_etmv3_magic 0x3030303030303030ULL
 #define __perf_cs_etmv4_magic 0x4040404040404040ULL
+#define __perf_cs_ete_magic   0x5050505050505050ULL
 #define CS_ETMV3_PRIV_SIZE (CS_ETM_PRIV_MAX * sizeof(u64))
 #define CS_ETMV4_PRIV_SIZE (CS_ETMV4_PRIV_MAX * sizeof(u64))
+#define CS_ETE_PRIV_SIZE (CS_ETE_PRIV_MAX * sizeof(u64))
 
 #ifdef HAVE_CSTRACE_SUPPORT
 int cs_etm__process_auxtrace_info(union perf_event *event,
diff --git a/tools/perf/util/data-convert-bt.c b/tools/perf/util/data-convert-bt.c
index cace349fb700..aa862a26d95c 100644
--- a/tools/perf/util/data-convert-bt.c
+++ b/tools/perf/util/data-convert-bt.c
@@ -1634,7 +1634,7 @@ int bt_convert__perf2ctf(const char *input, const char *path,
 
 	err = -1;
 	/* perf.data session */
-	session = perf_session__new(&data, 0, &c.tool);
+	session = perf_session__new(&data, &c.tool);
 	if (IS_ERR(session))
 		return PTR_ERR(session);
 
diff --git a/tools/perf/util/data-convert-json.c b/tools/perf/util/data-convert-json.c
index 355cd1948bdf..f1ab6edba446 100644
--- a/tools/perf/util/data-convert-json.c
+++ b/tools/perf/util/data-convert-json.c
@@ -334,7 +334,7 @@ int bt_convert__perf2json(const char *input_name, const char *output_name,
 		goto err;
 	}
 
-	session = perf_session__new(&data, false, &c.tool);
+	session = perf_session__new(&data, &c.tool);
 	if (IS_ERR(session)) {
 		fprintf(stderr, "Error creating perf session!\n");
 		goto err_fclose;
diff --git a/tools/perf/util/debug.h b/tools/perf/util/debug.h
index 48f631966067..f99468a7f681 100644
--- a/tools/perf/util/debug.h
+++ b/tools/perf/util/debug.h
@@ -22,6 +22,13 @@ extern int debug_data_convert;
 	eprintf(0, verbose, pr_fmt(fmt), ##__VA_ARGS__)
 #define pr_warning(fmt, ...) \
 	eprintf(0, verbose, pr_fmt(fmt), ##__VA_ARGS__)
+#define pr_warning_once(fmt, ...) ({		\
+	static int __warned;			\
+	if (unlikely(!__warned)) {		\
+		pr_warning(fmt, ##__VA_ARGS__); \
+		__warned = 1;			\
+	}					\
+})
 #define pr_info(fmt, ...) \
 	eprintf(0, verbose, pr_fmt(fmt), ##__VA_ARGS__)
 #define pr_debug(fmt, ...) \
@@ -55,6 +62,13 @@ void trace_event(union perf_event *event);
 
 int ui__error(const char *format, ...) __printf(1, 2);
 int ui__warning(const char *format, ...) __printf(1, 2);
+#define ui__warning_once(format, ...) ({		\
+	static int __warned;				\
+	if (unlikely(!__warned)) {			\
+		ui__warning(format, ##__VA_ARGS__);	\
+		__warned = 1;				\
+	}						\
+})
 
 void pr_stat(const char *fmt, ...);
 
diff --git a/tools/perf/util/dlfilter.c b/tools/perf/util/dlfilter.c
index ca33fbc5efde..db964d5a52af 100644
--- a/tools/perf/util/dlfilter.c
+++ b/tools/perf/util/dlfilter.c
@@ -21,7 +21,7 @@
 #include "symbol.h"
 #include "srcline.h"
 #include "dlfilter.h"
-#include "perf_dlfilter.h"
+#include "../include/perf/perf_dlfilter.h"
 
 static void al_to_d_al(struct addr_location *al, struct perf_dlfilter_al *d_al)
 {
@@ -530,8 +530,8 @@ int dlfilter__do_filter_event(struct dlfilter *d,
 	return ret;
 }
 
-static bool get_filter_desc(const char *dirname, const char *name,
-			    char **desc, char **long_desc)
+bool get_filter_desc(const char *dirname, const char *name, char **desc,
+		     char **long_desc)
 {
 	char path[PATH_MAX];
 	void *handle;
diff --git a/tools/perf/util/dlfilter.h b/tools/perf/util/dlfilter.h
index 505980442360..cc4bb9657d05 100644
--- a/tools/perf/util/dlfilter.h
+++ b/tools/perf/util/dlfilter.h
@@ -93,5 +93,7 @@ static inline int dlfilter__filter_event_early(struct dlfilter *d,
 }
 
 int list_available_dlfilters(const struct option *opt, const char *s, int unset);
+bool get_filter_desc(const char *dirname, const char *name, char **desc,
+		     char **long_desc);
 
 #endif
diff --git a/tools/perf/util/dso.h b/tools/perf/util/dso.h
index 52e7101c5609..83723ba11dc8 100644
--- a/tools/perf/util/dso.h
+++ b/tools/perf/util/dso.h
@@ -170,6 +170,7 @@ struct dso {
 	u8		 has_srcline:1;
 	u8		 hit:1;
 	u8		 annotate_warned:1;
+	u8		 auxtrace_warned:1;
 	u8		 short_name_allocated:1;
 	u8		 long_name_allocated:1;
 	u8		 is_64_bit:1;
diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c
index cec2e6cad8aa..8f7ff0035c41 100644
--- a/tools/perf/util/env.c
+++ b/tools/perf/util/env.c
@@ -219,13 +219,35 @@ void perf_env__exit(struct perf_env *env)
 	zfree(&env->hybrid_cpc_nodes);
 }
 
-void perf_env__init(struct perf_env *env __maybe_unused)
+void perf_env__init(struct perf_env *env)
 {
 #ifdef HAVE_LIBBPF_SUPPORT
 	env->bpf_progs.infos = RB_ROOT;
 	env->bpf_progs.btfs = RB_ROOT;
 	init_rwsem(&env->bpf_progs.lock);
 #endif
+	env->kernel_is_64_bit = -1;
+}
+
+static void perf_env__init_kernel_mode(struct perf_env *env)
+{
+	const char *arch = perf_env__raw_arch(env);
+
+	if (!strncmp(arch, "x86_64", 6) || !strncmp(arch, "aarch64", 7) ||
+	    !strncmp(arch, "arm64", 5) || !strncmp(arch, "mips64", 6) ||
+	    !strncmp(arch, "parisc64", 8) || !strncmp(arch, "riscv64", 7) ||
+	    !strncmp(arch, "s390x", 5) || !strncmp(arch, "sparc64", 7))
+		env->kernel_is_64_bit = 1;
+	else
+		env->kernel_is_64_bit = 0;
+}
+
+int perf_env__kernel_is_64_bit(struct perf_env *env)
+{
+	if (env->kernel_is_64_bit == -1)
+		perf_env__init_kernel_mode(env);
+
+	return env->kernel_is_64_bit;
 }
 
 int perf_env__set_cmdline(struct perf_env *env, int argc, const char *argv[])
@@ -349,7 +371,7 @@ static const char *normalize_arch(char *arch)
 		return "x86";
 	if (!strcmp(arch, "sun4u") || !strncmp(arch, "sparc", 5))
 		return "sparc";
-	if (!strcmp(arch, "aarch64") || !strcmp(arch, "arm64"))
+	if (!strncmp(arch, "aarch64", 7) || !strncmp(arch, "arm64", 5))
 		return "arm64";
 	if (!strncmp(arch, "arm", 3) || !strcmp(arch, "sa110"))
 		return "arm";
diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h
index 6824a7423a2d..1f5175820a05 100644
--- a/tools/perf/util/env.h
+++ b/tools/perf/util/env.h
@@ -61,6 +61,7 @@ struct perf_env {
 	unsigned long long	total_mem;
 	unsigned int		msr_pmu_type;
 	unsigned int		max_branches;
+	int			kernel_is_64_bit;
 
 	int			nr_cmdline;
 	int			nr_sibling_cores;
@@ -143,6 +144,8 @@ extern struct perf_env perf_env;
 
 void perf_env__exit(struct perf_env *env);
 
+int perf_env__kernel_is_64_bit(struct perf_env *env);
+
 int perf_env__set_cmdline(struct perf_env *env, int argc, const char *argv[]);
 
 int perf_env__read_cpuid(struct perf_env *env);
diff --git a/tools/perf/util/events_stats.h b/tools/perf/util/events_stats.h
index 3480bafd414b..1b0006092265 100644
--- a/tools/perf/util/events_stats.h
+++ b/tools/perf/util/events_stats.h
@@ -30,6 +30,7 @@ struct events_stats {
 	u64 total_lost_samples;
 	u64 total_aux_lost;
 	u64 total_aux_partial;
+	u64 total_aux_collision;
 	u64 total_invalid_chains;
 	u32 nr_events[PERF_RECORD_HEADER_MAX];
 	u32 nr_lost_warned;
diff --git a/tools/perf/util/evlist-hybrid.c b/tools/perf/util/evlist-hybrid.c
index db3f5fbdebe1..7c554234b43d 100644
--- a/tools/perf/util/evlist-hybrid.c
+++ b/tools/perf/util/evlist-hybrid.c
@@ -86,3 +86,76 @@ bool evlist__has_hybrid(struct evlist *evlist)
 
 	return false;
 }
+
+int evlist__fix_hybrid_cpus(struct evlist *evlist, const char *cpu_list)
+{
+	struct perf_cpu_map *cpus;
+	struct evsel *evsel, *tmp;
+	struct perf_pmu *pmu;
+	int ret, unmatched_count = 0, events_nr = 0;
+
+	if (!perf_pmu__has_hybrid() || !cpu_list)
+		return 0;
+
+	cpus = perf_cpu_map__new(cpu_list);
+	if (!cpus)
+		return -1;
+
+	/*
+	 * The evsels are created with hybrid pmu's cpus. But now we
+	 * need to check and adjust the cpus of evsel by cpu_list because
+	 * cpu_list may cause conflicts with cpus of evsel. For example,
+	 * cpus of evsel is cpu0-7, but the cpu_list is cpu6-8, we need
+	 * to adjust the cpus of evsel to cpu6-7. And then propatate maps
+	 * in evlist__create_maps().
+	 */
+	evlist__for_each_entry_safe(evlist, tmp, evsel) {
+		struct perf_cpu_map *matched_cpus, *unmatched_cpus;
+		char buf1[128], buf2[128];
+
+		pmu = perf_pmu__find_hybrid_pmu(evsel->pmu_name);
+		if (!pmu)
+			continue;
+
+		ret = perf_pmu__cpus_match(pmu, cpus, &matched_cpus,
+					   &unmatched_cpus);
+		if (ret)
+			goto out;
+
+		events_nr++;
+
+		if (matched_cpus->nr > 0 && (unmatched_cpus->nr > 0 ||
+		    matched_cpus->nr < cpus->nr ||
+		    matched_cpus->nr < pmu->cpus->nr)) {
+			perf_cpu_map__put(evsel->core.cpus);
+			perf_cpu_map__put(evsel->core.own_cpus);
+			evsel->core.cpus = perf_cpu_map__get(matched_cpus);
+			evsel->core.own_cpus = perf_cpu_map__get(matched_cpus);
+
+			if (unmatched_cpus->nr > 0) {
+				cpu_map__snprint(matched_cpus, buf1, sizeof(buf1));
+				pr_warning("WARNING: use %s in '%s' for '%s', skip other cpus in list.\n",
+					   buf1, pmu->name, evsel->name);
+			}
+		}
+
+		if (matched_cpus->nr == 0) {
+			evlist__remove(evlist, evsel);
+			evsel__delete(evsel);
+
+			cpu_map__snprint(cpus, buf1, sizeof(buf1));
+			cpu_map__snprint(pmu->cpus, buf2, sizeof(buf2));
+			pr_warning("WARNING: %s isn't a '%s', please use a CPU list in the '%s' range (%s)\n",
+				   buf1, pmu->name, pmu->name, buf2);
+			unmatched_count++;
+		}
+
+		perf_cpu_map__put(matched_cpus);
+		perf_cpu_map__put(unmatched_cpus);
+	}
+
+	ret = (unmatched_count == events_nr) ? -1 : 0;
+out:
+	perf_cpu_map__put(cpus);
+	return ret;
+}
diff --git a/tools/perf/util/evlist-hybrid.h b/tools/perf/util/evlist-hybrid.h
index 19f74b4c340a..aacdb1b0f948 100644
--- a/tools/perf/util/evlist-hybrid.h
+++ b/tools/perf/util/evlist-hybrid.h
@@ -10,5 +10,6 @@
 int evlist__add_default_hybrid(struct evlist *evlist, bool precise);
 void evlist__warn_hybrid_group(struct evlist *evlist);
 bool evlist__has_hybrid(struct evlist *evlist);
+int evlist__fix_hybrid_cpus(struct evlist *evlist, const char *cpu_list);
 
 #endif /* __PERF_EVLIST_HYBRID_H */
diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c
index 47581a237c7a..5f92319ce258 100644
--- a/tools/perf/util/evlist.c
+++ b/tools/perf/util/evlist.c
@@ -27,6 +27,7 @@
 #include "util/perf_api_probe.h"
 #include "util/evsel_fprintf.h"
 #include "util/evlist-hybrid.h"
+#include "util/pmu.h"
 #include <signal.h>
 #include <unistd.h>
 #include <sched.h>
@@ -1002,7 +1003,7 @@ int evlist__create_maps(struct evlist *evlist, struct target *target)
 	if (!cpus)
 		goto out_delete_threads;
 
-	evlist->core.has_user_cpus = !!target->cpu_list;
+	evlist->core.has_user_cpus = !!target->cpu_list && !target->hybrid;
 
 	perf_evlist__set_maps(&evlist->core, cpus, threads);
 
diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h
index 5c22383489ae..97bfb8d0be4f 100644
--- a/tools/perf/util/evlist.h
+++ b/tools/perf/util/evlist.h
@@ -276,6 +276,22 @@ void evlist__to_front(struct evlist *evlist, struct evsel *move_evsel);
 	__evlist__for_each_entry_continue(&(evlist)->core.entries, evsel)
 
 /**
+ * __evlist__for_each_entry_from - continue iteration from @evsel (included)
+ * @list: list_head instance to iterate
+ * @evsel: struct evsel iterator
+ */
+#define __evlist__for_each_entry_from(list, evsel) \
+	list_for_each_entry_from(evsel, list, core.node)
+
+/**
+ * evlist__for_each_entry_from - continue iteration from @evsel (included)
+ * @evlist: evlist instance to iterate
+ * @evsel: struct evsel iterator
+ */
+#define evlist__for_each_entry_from(evlist, evsel) \
+	__evlist__for_each_entry_from(&(evlist)->core.entries, evsel)
+
+/**
  * __evlist__for_each_entry_reverse - iterate thru all the evsels in reverse order
  * @list: list_head instance to iterate
  * @evsel: struct evsel iterator
diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c
index f61e5dd53f5d..54d251327b5b 100644
--- a/tools/perf/util/evsel.c
+++ b/tools/perf/util/evsel.c
@@ -1656,7 +1656,7 @@ static int update_fds(struct evsel *evsel,
 	return 0;
 }
 
-static bool ignore_missing_thread(struct evsel *evsel,
+bool evsel__ignore_missing_thread(struct evsel *evsel,
 				  int nr_cpus, int cpu,
 				  struct perf_thread_map *threads,
 				  int thread, int err)
@@ -1709,59 +1709,43 @@ static void display_attr(struct perf_event_attr *attr)
 	}
 }
 
-static int perf_event_open(struct evsel *evsel,
-			   pid_t pid, int cpu, int group_fd,
-			   unsigned long flags)
+bool evsel__precise_ip_fallback(struct evsel *evsel)
 {
-	int precise_ip = evsel->core.attr.precise_ip;
-	int fd;
-
-	while (1) {
-		pr_debug2_peo("sys_perf_event_open: pid %d  cpu %d  group_fd %d  flags %#lx",
-			  pid, cpu, group_fd, flags);
-
-		fd = sys_perf_event_open(&evsel->core.attr, pid, cpu, group_fd, flags);
-		if (fd >= 0)
-			break;
-
-		/* Do not try less precise if not requested. */
-		if (!evsel->precise_max)
-			break;
-
-		/*
-		 * We tried all the precise_ip values, and it's
-		 * still failing, so leave it to standard fallback.
-		 */
-		if (!evsel->core.attr.precise_ip) {
-			evsel->core.attr.precise_ip = precise_ip;
-			break;
-		}
+	/* Do not try less precise if not requested. */
+	if (!evsel->precise_max)
+		return false;
 
-		pr_debug2_peo("\nsys_perf_event_open failed, error %d\n", -ENOTSUP);
-		evsel->core.attr.precise_ip--;
-		pr_debug2_peo("decreasing precise_ip by one (%d)\n", evsel->core.attr.precise_ip);
-		display_attr(&evsel->core.attr);
+	/*
+	 * We tried all the precise_ip values, and it's
+	 * still failing, so leave it to standard fallback.
+	 */
+	if (!evsel->core.attr.precise_ip) {
+		evsel->core.attr.precise_ip = evsel->precise_ip_original;
+		return false;
 	}
 
-	return fd;
+	if (!evsel->precise_ip_original)
+		evsel->precise_ip_original = evsel->core.attr.precise_ip;
+
+	evsel->core.attr.precise_ip--;
+	pr_debug2_peo("decreasing precise_ip by one (%d)\n", evsel->core.attr.precise_ip);
+	display_attr(&evsel->core.attr);
+	return true;
 }
 
-static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
-		struct perf_thread_map *threads,
-		int start_cpu, int end_cpu)
+static struct perf_cpu_map *empty_cpu_map;
+static struct perf_thread_map *empty_thread_map;
+
+static int __evsel__prepare_open(struct evsel *evsel, struct perf_cpu_map *cpus,
+		struct perf_thread_map *threads)
 {
-	int cpu, thread, nthreads;
-	unsigned long flags = PERF_FLAG_FD_CLOEXEC;
-	int pid = -1, err, old_errno;
-	enum { NO_CHANGE, SET_TO_MAX, INCREASED_MAX } set_rlimit = NO_CHANGE;
+	int nthreads;
 
 	if ((perf_missing_features.write_backward && evsel->core.attr.write_backward) ||
 	    (perf_missing_features.aux_output     && evsel->core.attr.aux_output))
 		return -EINVAL;
 
 	if (cpus == NULL) {
-		static struct perf_cpu_map *empty_cpu_map;
-
 		if (empty_cpu_map == NULL) {
 			empty_cpu_map = perf_cpu_map__dummy_new();
 			if (empty_cpu_map == NULL)
@@ -1772,8 +1756,6 @@ static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
 	}
 
 	if (threads == NULL) {
-		static struct perf_thread_map *empty_thread_map;
-
 		if (empty_thread_map == NULL) {
 			empty_thread_map = thread_map__new_by_tid(-1);
 			if (empty_thread_map == NULL)
@@ -1792,12 +1774,15 @@ static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
 	    perf_evsel__alloc_fd(&evsel->core, cpus->nr, nthreads) < 0)
 		return -ENOMEM;
 
-	if (evsel->cgrp) {
-		flags |= PERF_FLAG_PID_CGROUP;
-		pid = evsel->cgrp->fd;
-	}
+	evsel->open_flags = PERF_FLAG_FD_CLOEXEC;
+	if (evsel->cgrp)
+		evsel->open_flags |= PERF_FLAG_PID_CGROUP;
 
-fallback_missing_features:
+	return 0;
+}
+
+static void evsel__disable_missing_features(struct evsel *evsel)
+{
 	if (perf_missing_features.weight_struct) {
 		evsel__set_sample_bit(evsel, WEIGHT);
 		evsel__reset_sample_bit(evsel, WEIGHT_STRUCT);
@@ -1809,7 +1794,7 @@ fallback_missing_features:
 		evsel->core.attr.clockid = 0;
 	}
 	if (perf_missing_features.cloexec)
-		flags &= ~(unsigned long)PERF_FLAG_FD_CLOEXEC;
+		evsel->open_flags &= ~(unsigned long)PERF_FLAG_FD_CLOEXEC;
 	if (perf_missing_features.mmap2)
 		evsel->core.attr.mmap2 = 0;
 	if (perf_missing_features.exclude_guest)
@@ -1825,119 +1810,26 @@ fallback_missing_features:
 		evsel->core.attr.bpf_event = 0;
 	if (perf_missing_features.branch_hw_idx)
 		evsel->core.attr.branch_sample_type &= ~PERF_SAMPLE_BRANCH_HW_INDEX;
-retry_sample_id:
 	if (perf_missing_features.sample_id_all)
 		evsel->core.attr.sample_id_all = 0;
+}
 
-	display_attr(&evsel->core.attr);
-
-	for (cpu = start_cpu; cpu < end_cpu; cpu++) {
-
-		for (thread = 0; thread < nthreads; thread++) {
-			int fd, group_fd;
-
-			if (!evsel->cgrp && !evsel->core.system_wide)
-				pid = perf_thread_map__pid(threads, thread);
-
-			group_fd = get_group_fd(evsel, cpu, thread);
-retry_open:
-			test_attr__ready();
-
-			fd = perf_event_open(evsel, pid, cpus->map[cpu],
-					     group_fd, flags);
-
-			FD(evsel, cpu, thread) = fd;
-
-			bpf_counter__install_pe(evsel, cpu, fd);
-
-			if (unlikely(test_attr__enabled)) {
-				test_attr__open(&evsel->core.attr, pid, cpus->map[cpu],
-						fd, group_fd, flags);
-			}
-
-			if (fd < 0) {
-				err = -errno;
-
-				if (ignore_missing_thread(evsel, cpus->nr, cpu, threads, thread, err)) {
-					/*
-					 * We just removed 1 thread, so take a step
-					 * back on thread index and lower the upper
-					 * nthreads limit.
-					 */
-					nthreads--;
-					thread--;
-
-					/* ... and pretend like nothing have happened. */
-					err = 0;
-					continue;
-				}
-
-				pr_debug2_peo("\nsys_perf_event_open failed, error %d\n",
-					  err);
-				goto try_fallback;
-			}
-
-			pr_debug2_peo(" = %d\n", fd);
-
-			if (evsel->bpf_fd >= 0) {
-				int evt_fd = fd;
-				int bpf_fd = evsel->bpf_fd;
-
-				err = ioctl(evt_fd,
-					    PERF_EVENT_IOC_SET_BPF,
-					    bpf_fd);
-				if (err && errno != EEXIST) {
-					pr_err("failed to attach bpf fd %d: %s\n",
-					       bpf_fd, strerror(errno));
-					err = -EINVAL;
-					goto out_close;
-				}
-			}
-
-			set_rlimit = NO_CHANGE;
-
-			/*
-			 * If we succeeded but had to kill clockid, fail and
-			 * have evsel__open_strerror() print us a nice error.
-			 */
-			if (perf_missing_features.clockid ||
-			    perf_missing_features.clockid_wrong) {
-				err = -EINVAL;
-				goto out_close;
-			}
-		}
-	}
-
-	return 0;
+int evsel__prepare_open(struct evsel *evsel, struct perf_cpu_map *cpus,
+			struct perf_thread_map *threads)
+{
+	int err;
 
-try_fallback:
-	/*
-	 * perf stat needs between 5 and 22 fds per CPU. When we run out
-	 * of them try to increase the limits.
-	 */
-	if (err == -EMFILE && set_rlimit < INCREASED_MAX) {
-		struct rlimit l;
+	err = __evsel__prepare_open(evsel, cpus, threads);
+	if (err)
+		return err;
 
-		old_errno = errno;
-		if (getrlimit(RLIMIT_NOFILE, &l) == 0) {
-			if (set_rlimit == NO_CHANGE)
-				l.rlim_cur = l.rlim_max;
-			else {
-				l.rlim_cur = l.rlim_max + 1000;
-				l.rlim_max = l.rlim_cur;
-			}
-			if (setrlimit(RLIMIT_NOFILE, &l) == 0) {
-				set_rlimit++;
-				errno = old_errno;
-				goto retry_open;
-			}
-		}
-		errno = old_errno;
-	}
+	evsel__disable_missing_features(evsel);
 
-	if (err != -EINVAL || cpu > 0 || thread > 0)
-		goto out_close;
+	return err;
+}
 
+bool evsel__detect_missing_features(struct evsel *evsel)
+{
 	/*
 	 * Must probe features in the order they were added to the
 	 * perf_event_attr interface.
@@ -1946,82 +1838,239 @@ try_fallback:
 	    (evsel->core.attr.sample_type & PERF_SAMPLE_WEIGHT_STRUCT)) {
 		perf_missing_features.weight_struct = true;
 		pr_debug2("switching off weight struct support\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.code_page_size &&
 	    (evsel->core.attr.sample_type & PERF_SAMPLE_CODE_PAGE_SIZE)) {
 		perf_missing_features.code_page_size = true;
 		pr_debug2_peo("Kernel has no PERF_SAMPLE_CODE_PAGE_SIZE support, bailing out\n");
-		goto out_close;
+		return false;
 	} else if (!perf_missing_features.data_page_size &&
 	    (evsel->core.attr.sample_type & PERF_SAMPLE_DATA_PAGE_SIZE)) {
 		perf_missing_features.data_page_size = true;
 		pr_debug2_peo("Kernel has no PERF_SAMPLE_DATA_PAGE_SIZE support, bailing out\n");
-		goto out_close;
+		return false;
 	} else if (!perf_missing_features.cgroup && evsel->core.attr.cgroup) {
 		perf_missing_features.cgroup = true;
 		pr_debug2_peo("Kernel has no cgroup sampling support, bailing out\n");
-		goto out_close;
-        } else if (!perf_missing_features.branch_hw_idx &&
+		return false;
+	} else if (!perf_missing_features.branch_hw_idx &&
 	    (evsel->core.attr.branch_sample_type & PERF_SAMPLE_BRANCH_HW_INDEX)) {
 		perf_missing_features.branch_hw_idx = true;
 		pr_debug2("switching off branch HW index support\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.aux_output && evsel->core.attr.aux_output) {
 		perf_missing_features.aux_output = true;
 		pr_debug2_peo("Kernel has no attr.aux_output support, bailing out\n");
-		goto out_close;
+		return false;
 	} else if (!perf_missing_features.bpf && evsel->core.attr.bpf_event) {
 		perf_missing_features.bpf = true;
 		pr_debug2_peo("switching off bpf_event\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.ksymbol && evsel->core.attr.ksymbol) {
 		perf_missing_features.ksymbol = true;
 		pr_debug2_peo("switching off ksymbol\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.write_backward && evsel->core.attr.write_backward) {
 		perf_missing_features.write_backward = true;
 		pr_debug2_peo("switching off write_backward\n");
-		goto out_close;
+		return false;
 	} else if (!perf_missing_features.clockid_wrong && evsel->core.attr.use_clockid) {
 		perf_missing_features.clockid_wrong = true;
 		pr_debug2_peo("switching off clockid\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.clockid && evsel->core.attr.use_clockid) {
 		perf_missing_features.clockid = true;
 		pr_debug2_peo("switching off use_clockid\n");
-		goto fallback_missing_features;
-	} else if (!perf_missing_features.cloexec && (flags & PERF_FLAG_FD_CLOEXEC)) {
+		return true;
+	} else if (!perf_missing_features.cloexec && (evsel->open_flags & PERF_FLAG_FD_CLOEXEC)) {
 		perf_missing_features.cloexec = true;
 		pr_debug2_peo("switching off cloexec flag\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.mmap2 && evsel->core.attr.mmap2) {
 		perf_missing_features.mmap2 = true;
 		pr_debug2_peo("switching off mmap2\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.exclude_guest &&
 		   (evsel->core.attr.exclude_guest || evsel->core.attr.exclude_host)) {
 		perf_missing_features.exclude_guest = true;
 		pr_debug2_peo("switching off exclude_guest, exclude_host\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.sample_id_all) {
 		perf_missing_features.sample_id_all = true;
 		pr_debug2_peo("switching off sample_id_all\n");
-		goto retry_sample_id;
+		return true;
 	} else if (!perf_missing_features.lbr_flags &&
 			(evsel->core.attr.branch_sample_type &
 			 (PERF_SAMPLE_BRANCH_NO_CYCLES |
 			  PERF_SAMPLE_BRANCH_NO_FLAGS))) {
 		perf_missing_features.lbr_flags = true;
 		pr_debug2_peo("switching off branch sample type no (cycles/flags)\n");
-		goto fallback_missing_features;
+		return true;
 	} else if (!perf_missing_features.group_read &&
 		    evsel->core.attr.inherit &&
 		   (evsel->core.attr.read_format & PERF_FORMAT_GROUP) &&
 		   evsel__is_group_leader(evsel)) {
 		perf_missing_features.group_read = true;
 		pr_debug2_peo("switching off group read\n");
-		goto fallback_missing_features;
+		return true;
+	} else {
+		return false;
+	}
+}
+
+bool evsel__increase_rlimit(enum rlimit_action *set_rlimit)
+{
+	int old_errno;
+	struct rlimit l;
+
+	if (*set_rlimit < INCREASED_MAX) {
+		old_errno = errno;
+
+		if (getrlimit(RLIMIT_NOFILE, &l) == 0) {
+			if (*set_rlimit == NO_CHANGE) {
+				l.rlim_cur = l.rlim_max;
+			} else {
+				l.rlim_cur = l.rlim_max + 1000;
+				l.rlim_max = l.rlim_cur;
+			}
+			if (setrlimit(RLIMIT_NOFILE, &l) == 0) {
+				(*set_rlimit) += 1;
+				errno = old_errno;
+				return true;
+			}
+		}
+		errno = old_errno;
 	}
+
+	return false;
+}
+
+static int evsel__open_cpu(struct evsel *evsel, struct perf_cpu_map *cpus,
+		struct perf_thread_map *threads,
+		int start_cpu, int end_cpu)
+{
+	int cpu, thread, nthreads;
+	int pid = -1, err, old_errno;
+	enum rlimit_action set_rlimit = NO_CHANGE;
+
+	err = __evsel__prepare_open(evsel, cpus, threads);
+	if (err)
+		return err;
+
+	if (cpus == NULL)
+		cpus = empty_cpu_map;
+
+	if (threads == NULL)
+		threads = empty_thread_map;
+
+	if (evsel->core.system_wide)
+		nthreads = 1;
+	else
+		nthreads = threads->nr;
+
+	if (evsel->cgrp)
+		pid = evsel->cgrp->fd;
+
+fallback_missing_features:
+	evsel__disable_missing_features(evsel);
+
+	display_attr(&evsel->core.attr);
+
+	for (cpu = start_cpu; cpu < end_cpu; cpu++) {
+
+		for (thread = 0; thread < nthreads; thread++) {
+			int fd, group_fd;
+retry_open:
+			if (thread >= nthreads)
+				break;
+
+			if (!evsel->cgrp && !evsel->core.system_wide)
+				pid = perf_thread_map__pid(threads, thread);
+
+			group_fd = get_group_fd(evsel, cpu, thread);
+
+			test_attr__ready();
+
+			pr_debug2_peo("sys_perf_event_open: pid %d  cpu %d  group_fd %d  flags %#lx",
+				pid, cpus->map[cpu], group_fd, evsel->open_flags);
+
+			fd = sys_perf_event_open(&evsel->core.attr, pid, cpus->map[cpu],
+						group_fd, evsel->open_flags);
+
+			FD(evsel, cpu, thread) = fd;
+
+			if (fd < 0) {
+				err = -errno;
+
+				pr_debug2_peo("\nsys_perf_event_open failed, error %d\n",
+					  err);
+				goto try_fallback;
+			}
+
+			bpf_counter__install_pe(evsel, cpu, fd);
+
+			if (unlikely(test_attr__enabled)) {
+				test_attr__open(&evsel->core.attr, pid, cpus->map[cpu],
+						fd, group_fd, evsel->open_flags);
+			}
+
+			pr_debug2_peo(" = %d\n", fd);
+
+			if (evsel->bpf_fd >= 0) {
+				int evt_fd = fd;
+				int bpf_fd = evsel->bpf_fd;
+
+				err = ioctl(evt_fd,
+					    PERF_EVENT_IOC_SET_BPF,
+					    bpf_fd);
+				if (err && errno != EEXIST) {
+					pr_err("failed to attach bpf fd %d: %s\n",
+					       bpf_fd, strerror(errno));
+					err = -EINVAL;
+					goto out_close;
+				}
+			}
+
+			set_rlimit = NO_CHANGE;
+
+			/*
+			 * If we succeeded but had to kill clockid, fail and
+			 * have evsel__open_strerror() print us a nice error.
+			 */
+			if (perf_missing_features.clockid ||
+			    perf_missing_features.clockid_wrong) {
+				err = -EINVAL;
+				goto out_close;
+			}
+		}
+	}
+
+	return 0;
+
+try_fallback:
+	if (evsel__precise_ip_fallback(evsel))
+		goto retry_open;
+
+	if (evsel__ignore_missing_thread(evsel, cpus->nr, cpu, threads, thread, err)) {
+		/* We just removed 1 thread, so lower the upper nthreads limit. */
+		nthreads--;
+
+		/* ... and pretend like nothing have happened. */
+		err = 0;
+		goto retry_open;
+	}
+	/*
+	 * perf stat needs between 5 and 22 fds per CPU. When we run out
+	 * of them try to increase the limits.
+	 */
+	if (err == -EMFILE && evsel__increase_rlimit(&set_rlimit))
+		goto retry_open;
+
+	if (err != -EINVAL || cpu > 0 || thread > 0)
+		goto out_close;
+
+	if (evsel__detect_missing_features(evsel))
+		goto fallback_missing_features;
 out_close:
 	if (err)
 		threads->err_thread = thread;
diff --git a/tools/perf/util/evsel.h b/tools/perf/util/evsel.h
index 80383096d51c..1b3eeab5f188 100644
--- a/tools/perf/util/evsel.h
+++ b/tools/perf/util/evsel.h
@@ -150,6 +150,8 @@ struct evsel {
 		struct bperf_leader_bpf *leader_skel;
 		struct bperf_follower_bpf *follower_skel;
 	};
+	unsigned long		open_flags;
+	int			precise_ip_original;
 };
 
 struct perf_missing_features {
@@ -286,6 +288,18 @@ int evsel__open_per_thread(struct evsel *evsel, struct perf_thread_map *threads)
 int evsel__open(struct evsel *evsel, struct perf_cpu_map *cpus,
 		struct perf_thread_map *threads);
 void evsel__close(struct evsel *evsel);
+int evsel__prepare_open(struct evsel *evsel, struct perf_cpu_map *cpus,
+		struct perf_thread_map *threads);
+bool evsel__detect_missing_features(struct evsel *evsel);
+
+enum rlimit_action { NO_CHANGE, SET_TO_MAX, INCREASED_MAX };
+bool evsel__increase_rlimit(enum rlimit_action *set_rlimit);
+
+bool evsel__ignore_missing_thread(struct evsel *evsel,
+				  int nr_cpus, int cpu,
+				  struct perf_thread_map *threads,
+				  int thread, int err);
+bool evsel__precise_ip_fallback(struct evsel *evsel);
 
 struct perf_sample;
 
diff --git a/tools/perf/util/get_current_dir_name.c b/tools/perf/util/get_current_dir_name.c
index b205d929245f..e68935e9ac8c 100644
--- a/tools/perf/util/get_current_dir_name.c
+++ b/tools/perf/util/get_current_dir_name.c
@@ -3,8 +3,9 @@
 //
 #ifndef HAVE_GET_CURRENT_DIR_NAME
 #include "get_current_dir_name.h"
+#include <limits.h>
+#include <string.h>
 #include <unistd.h>
-#include <stdlib.h>
 
 /* Android's 'bionic' library, for one, doesn't have this */
 
diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c
index 44249027507a..1c7414f66655 100644
--- a/tools/perf/util/header.c
+++ b/tools/perf/util/header.c
@@ -278,7 +278,7 @@ static int do_read_bitmap(struct feat_fd *ff, unsigned long **pset, u64 *psize)
 	if (ret)
 		return ret;
 
-	set = bitmap_alloc(size);
+	set = bitmap_zalloc(size);
 	if (!set)
 		return -ENOMEM;
 
@@ -1284,7 +1284,7 @@ static int memory_node__read(struct memory_node *n, unsigned long idx)
 
 	dir = opendir(path);
 	if (!dir) {
-		pr_warning("failed: cant' open memory sysfs data\n");
+		pr_warning("failed: can't open memory sysfs data\n");
 		return -1;
 	}
 
@@ -1294,7 +1294,7 @@ static int memory_node__read(struct memory_node *n, unsigned long idx)
 
 	size++;
 
-	n->set = bitmap_alloc(size);
+	n->set = bitmap_zalloc(size);
 	if (!n->set) {
 		closedir(dir);
 		return -ENOMEM;
@@ -3865,10 +3865,10 @@ static int perf_file_section__process(struct perf_file_section *section,
 static int perf_file_header__read_pipe(struct perf_pipe_file_header *header,
 				       struct perf_header *ph,
 				       struct perf_data* data,
-				       bool repipe)
+				       bool repipe, int repipe_fd)
 {
 	struct feat_fd ff = {
-		.fd = STDOUT_FILENO,
+		.fd = repipe_fd,
 		.ph = ph,
 	};
 	ssize_t ret;
@@ -3891,13 +3891,13 @@ static int perf_file_header__read_pipe(struct perf_pipe_file_header *header,
 	return 0;
 }
 
-static int perf_header__read_pipe(struct perf_session *session)
+static int perf_header__read_pipe(struct perf_session *session, int repipe_fd)
 {
 	struct perf_header *header = &session->header;
 	struct perf_pipe_file_header f_header;
 
 	if (perf_file_header__read_pipe(&f_header, header, session->data,
-					session->repipe) < 0) {
+					session->repipe, repipe_fd) < 0) {
 		pr_debug("incompatible file format\n");
 		return -EINVAL;
 	}
@@ -3995,7 +3995,7 @@ static int evlist__prepare_tracepoint_events(struct evlist *evlist, struct tep_h
 	return 0;
 }
 
-int perf_session__read_header(struct perf_session *session)
+int perf_session__read_header(struct perf_session *session, int repipe_fd)
 {
 	struct perf_data *data = session->data;
 	struct perf_header *header = &session->header;
@@ -4016,7 +4016,7 @@ int perf_session__read_header(struct perf_session *session)
 	 * We can read 'pipe' data event from regular file,
 	 * check for the pipe header regardless of source.
 	 */
-	err = perf_header__read_pipe(session);
+	err = perf_header__read_pipe(session, repipe_fd);
 	if (!err || perf_data__is_pipe(data)) {
 		data->is_pipe = true;
 		return err;
diff --git a/tools/perf/util/header.h b/tools/perf/util/header.h
index ae6b1cf19a7d..c9e3265832d9 100644
--- a/tools/perf/util/header.h
+++ b/tools/perf/util/header.h
@@ -115,7 +115,7 @@ struct perf_session;
 struct perf_tool;
 union perf_event;
 
-int perf_session__read_header(struct perf_session *session);
+int perf_session__read_header(struct perf_session *session, int repipe_fd);
 int perf_session__write_header(struct perf_session *session,
 			       struct evlist *evlist,
 			       int fd, bool at_exit);
diff --git a/tools/perf/util/llvm-utils.c b/tools/perf/util/llvm-utils.c
index cbd9b268f168..96c8ef60f4f8 100644
--- a/tools/perf/util/llvm-utils.c
+++ b/tools/perf/util/llvm-utils.c
@@ -38,6 +38,8 @@ struct llvm_param llvm_param = {
 	.user_set_param = false,
 };
 
+static void version_notice(void);
+
 int perf_llvm_config(const char *var, const char *value)
 {
 	if (!strstarts(var, "llvm."))
@@ -108,6 +110,21 @@ search_program(const char *def, const char *name,
 	return ret;
 }
 
+static int search_program_and_warn(const char *def, const char *name,
+				   char *output)
+{
+	int ret = search_program(def, name, output);
+
+	if (ret) {
+		pr_err("ERROR:\tunable to find %s.\n"
+		       "Hint:\tTry to install latest clang/llvm to support BPF. Check your $PATH\n"
+		       "     \tand '%s-path' option in [llvm] section of ~/.perfconfig.\n",
+		       name, name);
+		version_notice();
+	}
+	return ret;
+}
+
 #define READ_SIZE	4096
 static int
 read_from_pipe(const char *cmd, void **p_buf, size_t *p_read_sz)
@@ -217,7 +234,7 @@ version_notice(void)
 "     \t\tgit clone http://llvm.org/git/clang.git\n\n"
 "     \tOr fetch the latest clang/llvm 3.7 from pre-built llvm packages for\n"
 "     \tdebian/ubuntu:\n"
-"     \t\thttp://llvm.org/apt\n\n"
+"     \t\thttps://apt.llvm.org/\n\n"
 "     \tIf you are using old version of clang, change 'clang-bpf-cmd-template'\n"
 "     \toption in [llvm] section of ~/.perfconfig to:\n\n"
 "     \t  \"$CLANG_EXEC $CLANG_OPTIONS $KERNEL_INC_OPTIONS $PERF_BPF_INC_OPTIONS \\\n"
@@ -458,16 +475,10 @@ int llvm__compile_bpf(const char *path, void **p_obj_buf,
 	if (!template)
 		template = CLANG_BPF_CMD_DEFAULT_TEMPLATE;
 
-	err = search_program(llvm_param.clang_path,
+	err = search_program_and_warn(llvm_param.clang_path,
 			     "clang", clang_path);
-	if (err) {
-		pr_err(
-"ERROR:\tunable to find clang.\n"
-"Hint:\tTry to install latest clang/llvm to support BPF. Check your $PATH\n"
-"     \tand 'clang-path' option in [llvm] section of ~/.perfconfig.\n");
-		version_notice();
+	if (err)
 		return -ENOENT;
-	}
 
 	/*
 	 * This is an optional work. Even it fail we can continue our
@@ -495,14 +506,9 @@ int llvm__compile_bpf(const char *path, void **p_obj_buf,
 	force_set_env("WORKING_DIR", kbuild_dir ? : ".");
 
 	if (opts) {
-		err = search_program(llvm_param.llc_path, "llc", llc_path);
-		if (err) {
-			pr_err("ERROR:\tunable to find llc.\n"
-			       "Hint:\tTry to install latest clang/llvm to support BPF. Check your $PATH\n"
-			       "     \tand 'llc-path' option in [llvm] section of ~/.perfconfig.\n");
-			version_notice();
+		err = search_program_and_warn(llvm_param.llc_path, "llc", llc_path);
+		if (err)
 			goto errout;
-		}
 
 		err = -ENOMEM;
 		if (asprintf(&pipe_template, "%s -emit-llvm | %s -march=bpf %s -filetype=obj -o -",
@@ -579,5 +585,5 @@ int llvm__search_clang(void)
 {
 	char clang_path[PATH_MAX];
 
-	return search_program(llvm_param.clang_path, "clang", clang_path);
+	return search_program_and_warn(llvm_param.clang_path, "clang", clang_path);
 }
diff --git a/tools/perf/util/metricgroup.c b/tools/perf/util/metricgroup.c
index 99d047c5ead0..29b747ac31c1 100644
--- a/tools/perf/util/metricgroup.c
+++ b/tools/perf/util/metricgroup.c
@@ -313,7 +313,7 @@ static int metricgroup__setup_events(struct list_head *groups,
 	struct evsel *evsel, *tmp;
 	unsigned long *evlist_used;
 
-	evlist_used = bitmap_alloc(perf_evlist->core.nr_entries);
+	evlist_used = bitmap_zalloc(perf_evlist->core.nr_entries);
 	if (!evlist_used)
 		return -ENOMEM;
 
diff --git a/tools/perf/util/mmap.c b/tools/perf/util/mmap.c
index ab7108d22428..512dc8b9c168 100644
--- a/tools/perf/util/mmap.c
+++ b/tools/perf/util/mmap.c
@@ -106,7 +106,7 @@ static int perf_mmap__aio_bind(struct mmap *map, int idx, int cpu, int affinity)
 		data = map->aio.data[idx];
 		mmap_len = mmap__mmap_len(map);
 		node_index = cpu__get_node(cpu);
-		node_mask = bitmap_alloc(node_index + 1);
+		node_mask = bitmap_zalloc(node_index + 1);
 		if (!node_mask) {
 			pr_err("Failed to allocate node mask for mbind: error %m\n");
 			return -1;
@@ -258,7 +258,7 @@ static void build_node_mask(int node, struct mmap_cpu_mask *mask)
 static int perf_mmap__setup_affinity_mask(struct mmap *map, struct mmap_params *mp)
 {
 	map->affinity_mask.nbits = cpu__max_cpu();
-	map->affinity_mask.bits = bitmap_alloc(map->affinity_mask.nbits);
+	map->affinity_mask.bits = bitmap_zalloc(map->affinity_mask.nbits);
 	if (!map->affinity_mask.bits)
 		return -1;
 
diff --git a/tools/perf/util/mmap.h b/tools/perf/util/mmap.h
index 9d5f589f02ae..af33118354dd 100644
--- a/tools/perf/util/mmap.h
+++ b/tools/perf/util/mmap.h
@@ -6,6 +6,7 @@
 #include <linux/refcount.h>
 #include <linux/types.h>
 #include <linux/ring_buffer.h>
+#include <linux/bitops.h>
 #include <stdbool.h>
 #include <pthread.h> // for cpu_set_t
 #ifdef HAVE_AIO_SUPPORT
diff --git a/tools/perf/util/parse-events.y b/tools/perf/util/parse-events.y
index 9321bd0e2f76..d94e48e1ff9b 100644
--- a/tools/perf/util/parse-events.y
+++ b/tools/perf/util/parse-events.y
@@ -316,7 +316,8 @@ event_pmu_name opt_pmu_config
 			if (!strncmp(name, "uncore_", 7) &&
 			    strncmp($1, "uncore_", 7))
 				name += 7;
-			if (!perf_pmu__match(pattern, name, $1)) {
+			if (!perf_pmu__match(pattern, name, $1) ||
+			    !perf_pmu__match(pattern, pmu->alias_name, $1)) {
 				if (parse_events_copy_term_list(orig_terms, &terms))
 					CLEANUP_YYABORT;
 				if (!parse_events_add_pmu(_parse_state, list, pmu->name, terms, true, false))
diff --git a/tools/perf/util/parse-sublevel-options.h b/tools/perf/util/parse-sublevel-options.h
index 9b9efcc2aaad..578b18ef03bb 100644
--- a/tools/perf/util/parse-sublevel-options.h
+++ b/tools/perf/util/parse-sublevel-options.h
@@ -8,4 +8,4 @@ struct sublevel_option {
 
 int perf_parse_sublevel_options(const char *str, struct sublevel_option *opts);
 
-#endif
\ No newline at end of file
+#endif
diff --git a/tools/perf/util/pmu.c b/tools/perf/util/pmu.c
index fc683bc41715..bdabd62170d2 100644
--- a/tools/perf/util/pmu.c
+++ b/tools/perf/util/pmu.c
@@ -843,8 +843,7 @@ void pmu_add_cpu_aliases_map(struct list_head *head, struct perf_pmu *pmu,
 			break;
 		}
 
-		if (pmu_is_uncore(name) &&
-		    pmu_uncore_alias_match(pname, name))
+		if (pmu->is_uncore && pmu_uncore_alias_match(pname, name))
 			goto new_alias;
 
 		if (strcmp(pname, name))
@@ -927,7 +926,7 @@ static int pmu_add_sys_aliases_iter_fn(struct pmu_event *pe, void *data)
 	return 0;
 }
 
-static void pmu_add_sys_aliases(struct list_head *head, struct perf_pmu *pmu)
+void pmu_add_sys_aliases(struct list_head *head, struct perf_pmu *pmu)
 {
 	struct pmu_sys_event_iter_data idata = {
 		.head = head,
@@ -946,6 +945,18 @@ perf_pmu__get_default_config(struct perf_pmu *pmu __maybe_unused)
 	return NULL;
 }
 
+char * __weak
+pmu_find_real_name(const char *name)
+{
+	return (char *)name;
+}
+
+char * __weak
+pmu_find_alias_name(const char *name __maybe_unused)
+{
+	return NULL;
+}
+
 static int pmu_max_precise(const char *name)
 {
 	char path[PATH_MAX];
@@ -959,13 +970,15 @@ static int pmu_max_precise(const char *name)
 	return max_precise;
 }
 
-static struct perf_pmu *pmu_lookup(const char *name)
+static struct perf_pmu *pmu_lookup(const char *lookup_name)
 {
 	struct perf_pmu *pmu;
 	LIST_HEAD(format);
 	LIST_HEAD(aliases);
 	__u32 type;
+	char *name = pmu_find_real_name(lookup_name);
 	bool is_hybrid = perf_pmu__hybrid_mounted(name);
+	char *alias_name;
 
 	/*
 	 * Check pmu name for hybrid and the pmu may be invalid in sysfs
@@ -996,6 +1009,16 @@ static struct perf_pmu *pmu_lookup(const char *name)
 
 	pmu->cpus = pmu_cpumask(name);
 	pmu->name = strdup(name);
+	if (!pmu->name)
+		goto err;
+
+	alias_name = pmu_find_alias_name(name);
+	if (alias_name) {
+		pmu->alias_name = strdup(alias_name);
+		if (!pmu->alias_name)
+			goto err;
+	}
+
 	pmu->type = type;
 	pmu->is_uncore = pmu_is_uncore(name);
 	if (pmu->is_uncore)
@@ -1018,15 +1041,22 @@ static struct perf_pmu *pmu_lookup(const char *name)
 	pmu->default_config = perf_pmu__get_default_config(pmu);
 
 	return pmu;
+err:
+	if (pmu->name)
+		free(pmu->name);
+	free(pmu);
+	return NULL;
 }
 
 static struct perf_pmu *pmu_find(const char *name)
 {
 	struct perf_pmu *pmu;
 
-	list_for_each_entry(pmu, &pmus, list)
-		if (!strcmp(pmu->name, name))
+	list_for_each_entry(pmu, &pmus, list) {
+		if (!strcmp(pmu->name, name) ||
+		    (pmu->alias_name && !strcmp(pmu->alias_name, name)))
 			return pmu;
+	}
 
 	return NULL;
 }
@@ -1920,6 +1950,9 @@ bool perf_pmu__has_hybrid(void)
 
 int perf_pmu__match(char *pattern, char *name, char *tok)
 {
+	if (!name)
+		return -1;
+
 	if (fnmatch(pattern, name, 0))
 		return -1;
 
@@ -1928,3 +1961,38 @@ int perf_pmu__match(char *pattern, char *name, char *tok)
 
 	return 0;
 }
+
+int perf_pmu__cpus_match(struct perf_pmu *pmu, struct perf_cpu_map *cpus,
+			 struct perf_cpu_map **mcpus_ptr,
+			 struct perf_cpu_map **ucpus_ptr)
+{
+	struct perf_cpu_map *pmu_cpus = pmu->cpus;
+	struct perf_cpu_map *matched_cpus, *unmatched_cpus;
+	int matched_nr = 0, unmatched_nr = 0;
+
+	matched_cpus = perf_cpu_map__default_new();
+	if (!matched_cpus)
+		return -1;
+
+	unmatched_cpus = perf_cpu_map__default_new();
+	if (!unmatched_cpus) {
+		perf_cpu_map__put(matched_cpus);
+		return -1;
+	}
+
+	for (int i = 0; i < cpus->nr; i++) {
+		int cpu;
+
+		cpu = perf_cpu_map__idx(pmu_cpus, cpus->map[i]);
+		if (cpu == -1)
+			unmatched_cpus->map[unmatched_nr++] = cpus->map[i];
+		else
+			matched_cpus->map[matched_nr++] = cpus->map[i];
+	}
+
+	unmatched_cpus->nr = unmatched_nr;
+	matched_cpus->nr = matched_nr;
+	*mcpus_ptr = matched_cpus;
+	*ucpus_ptr = unmatched_cpus;
+	return 0;
+}
diff --git a/tools/perf/util/pmu.h b/tools/perf/util/pmu.h
index 926da483a141..394898b07fd9 100644
--- a/tools/perf/util/pmu.h
+++ b/tools/perf/util/pmu.h
@@ -11,6 +11,7 @@
 #include "pmu-events/pmu-events.h"
 
 struct evsel_config_term;
+struct perf_cpu_map;
 
 enum {
 	PERF_PMU_FORMAT_VALUE_CONFIG,
@@ -21,6 +22,7 @@ enum {
 #define PERF_PMU_FORMAT_BITS 64
 #define EVENT_SOURCE_DEVICE_PATH "/bus/event_source/devices/"
 #define CPUS_TEMPLATE_CPU	"%s/bus/event_source/devices/%s/cpus"
+#define MAX_PMU_NAME_LEN 128
 
 struct perf_event_attr;
 
@@ -32,6 +34,7 @@ struct perf_pmu_caps {
 
 struct perf_pmu {
 	char *name;
+	char *alias_name;
 	char *id;
 	__u32 type;
 	bool selectable;
@@ -81,6 +84,7 @@ struct perf_pmu_alias {
 
 struct perf_pmu *perf_pmu__find(const char *name);
 struct perf_pmu *perf_pmu__find_by_type(unsigned int type);
+void pmu_add_sys_aliases(struct list_head *head, struct perf_pmu *pmu);
 int perf_pmu__config(struct perf_pmu *pmu, struct perf_event_attr *attr,
 		     struct list_head *head_terms,
 		     struct parse_events_error *error);
@@ -135,4 +139,10 @@ void perf_pmu__warn_invalid_config(struct perf_pmu *pmu, __u64 config,
 bool perf_pmu__has_hybrid(void);
 int perf_pmu__match(char *pattern, char *name, char *tok);
 
+int perf_pmu__cpus_match(struct perf_pmu *pmu, struct perf_cpu_map *cpus,
+			 struct perf_cpu_map **mcpus_ptr,
+			 struct perf_cpu_map **ucpus_ptr);
+
+char *pmu_find_real_name(const char *name);
+char *pmu_find_alias_name(const char *name);
 #endif /* __PMU_H */
diff --git a/tools/perf/util/scripting-engines/trace-event-python.c b/tools/perf/util/scripting-engines/trace-event-python.c
index 69129e2aa7a1..c0c010350bc2 100644
--- a/tools/perf/util/scripting-engines/trace-event-python.c
+++ b/tools/perf/util/scripting-engines/trace-event-python.c
@@ -1422,6 +1422,37 @@ static void python_process_event(union perf_event *event,
 	}
 }
 
+static void python_process_throttle(union perf_event *event,
+				    struct perf_sample *sample,
+				    struct machine *machine)
+{
+	const char *handler_name;
+	PyObject *handler, *t;
+
+	if (event->header.type == PERF_RECORD_THROTTLE)
+		handler_name = "throttle";
+	else
+		handler_name = "unthrottle";
+	handler = get_handler(handler_name);
+	if (!handler)
+		return;
+
+	t = tuple_new(6);
+	if (!t)
+		return;
+
+	tuple_set_u64(t, 0, event->throttle.time);
+	tuple_set_u64(t, 1, event->throttle.id);
+	tuple_set_u64(t, 2, event->throttle.stream_id);
+	tuple_set_s32(t, 3, sample->cpu);
+	tuple_set_s32(t, 4, sample->pid);
+	tuple_set_s32(t, 5, sample->tid);
+
+	call_object(handler, t, handler_name);
+
+	Py_DECREF(t);
+}
+
 static void python_do_process_switch(union perf_event *event,
 				     struct perf_sample *sample,
 				     struct machine *machine)
@@ -2079,5 +2110,6 @@ struct scripting_ops python_scripting_ops = {
 	.process_auxtrace_error	= python_process_auxtrace_error,
 	.process_stat		= python_process_stat,
 	.process_stat_interval	= python_process_stat_interval,
+	.process_throttle	= python_process_throttle,
 	.generate_script	= python_generate_script,
 };
diff --git a/tools/perf/util/session.c b/tools/perf/util/session.c
index 51f727402912..069c2cfdd3be 100644
--- a/tools/perf/util/session.c
+++ b/tools/perf/util/session.c
@@ -102,11 +102,11 @@ static int perf_session__deliver_event(struct perf_session *session,
 				       struct perf_tool *tool,
 				       u64 file_offset);
 
-static int perf_session__open(struct perf_session *session)
+static int perf_session__open(struct perf_session *session, int repipe_fd)
 {
 	struct perf_data *data = session->data;
 
-	if (perf_session__read_header(session) < 0) {
+	if (perf_session__read_header(session, repipe_fd) < 0) {
 		pr_err("incompatible file format (rerun with -v to learn more)\n");
 		return -1;
 	}
@@ -185,8 +185,9 @@ static int ordered_events__deliver_event(struct ordered_events *oe,
 					   session->tool, event->file_offset);
 }
 
-struct perf_session *perf_session__new(struct perf_data *data,
-				       bool repipe, struct perf_tool *tool)
+struct perf_session *__perf_session__new(struct perf_data *data,
+					 bool repipe, int repipe_fd,
+					 struct perf_tool *tool)
 {
 	int ret = -ENOMEM;
 	struct perf_session *session = zalloc(sizeof(*session));
@@ -210,7 +211,7 @@ struct perf_session *perf_session__new(struct perf_data *data,
 		session->data = data;
 
 		if (perf_data__is_read(data)) {
-			ret = perf_session__open(session);
+			ret = perf_session__open(session, repipe_fd);
 			if (ret < 0)
 				goto out_delete;
 
@@ -1540,6 +1541,8 @@ static int machines__deliver_event(struct machines *machines,
 				evlist->stats.total_aux_lost += 1;
 			if (event->aux.flags & PERF_AUX_FLAG_PARTIAL)
 				evlist->stats.total_aux_partial += 1;
+			if (event->aux.flags & PERF_AUX_FLAG_COLLISION)
+				evlist->stats.total_aux_collision += 1;
 		}
 		return tool->aux(tool, event, sample, machine);
 	case PERF_RECORD_ITRACE_START:
@@ -1895,6 +1898,13 @@ static void perf_session__warn_about_errors(const struct perf_session *session)
 			    "");
 	}
 
+	if (session->tool->aux == perf_event__process_aux &&
+	    stats->total_aux_collision != 0) {
+		ui__warning("AUX data detected collision  %" PRIu64 " times out of %u!\n\n",
+			    stats->total_aux_collision,
+			    stats->nr_events[PERF_RECORD_AUX]);
+	}
+
 	if (stats->nr_unknown_events != 0) {
 		ui__warning("Found %u unknown events!\n\n"
 			    "Is this an older tool processing a perf.data "
diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h
index e31ba4c92a6c..5d8bd14a0a39 100644
--- a/tools/perf/util/session.h
+++ b/tools/perf/util/session.h
@@ -54,8 +54,16 @@ struct decomp {
 
 struct perf_tool;
 
-struct perf_session *perf_session__new(struct perf_data *data,
-				       bool repipe, struct perf_tool *tool);
+struct perf_session *__perf_session__new(struct perf_data *data,
+					 bool repipe, int repipe_fd,
+					 struct perf_tool *tool);
+
+static inline struct perf_session *perf_session__new(struct perf_data *data,
+						     struct perf_tool *tool)
+{
+	return __perf_session__new(data, false, -1, tool);
+}
+
 void perf_session__delete(struct perf_session *session);
 
 void perf_event_header__bswap(struct perf_event_header *hdr);
diff --git a/tools/perf/util/synthetic-events.c b/tools/perf/util/synthetic-events.c
index 35aa0c0f7cd9..a7e981b2d7de 100644
--- a/tools/perf/util/synthetic-events.c
+++ b/tools/perf/util/synthetic-events.c
@@ -1,5 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0-only 
 
+#include "util/cgroup.h"
+#include "util/data.h"
 #include "util/debug.h"
 #include "util/dso.h"
 #include "util/event.h"
@@ -16,7 +18,6 @@
 #include "util/synthetic-events.h"
 #include "util/target.h"
 #include "util/time-utils.h"
-#include "util/cgroup.h"
 #include <linux/bitops.h>
 #include <linux/kernel.h>
 #include <linux/string.h>
@@ -2179,3 +2180,53 @@ int perf_event__synthesize_features(struct perf_tool *tool, struct perf_session
 	free(ff.buf);
 	return ret;
 }
+
+int perf_event__synthesize_for_pipe(struct perf_tool *tool,
+				    struct perf_session *session,
+				    struct perf_data *data,
+				    perf_event__handler_t process)
+{
+	int err;
+	int ret = 0;
+	struct evlist *evlist = session->evlist;
+
+	/*
+	 * We need to synthesize events first, because some
+	 * features works on top of them (on report side).
+	 */
+	err = perf_event__synthesize_attrs(tool, evlist, process);
+	if (err < 0) {
+		pr_err("Couldn't synthesize attrs.\n");
+		return err;
+	}
+	ret += err;
+
+	err = perf_event__synthesize_features(tool, session, evlist, process);
+	if (err < 0) {
+		pr_err("Couldn't synthesize features.\n");
+		return err;
+	}
+	ret += err;
+
+	if (have_tracepoints(&evlist->core.entries)) {
+		int fd = perf_data__fd(data);
+
+		/*
+		 * FIXME err <= 0 here actually means that
+		 * there were no tracepoints so its not really
+		 * an error, just that we don't need to
+		 * synthesize anything.  We really have to
+		 * return this more properly and also
+		 * propagate errors that now are calling die()
+		 */
+		err = perf_event__synthesize_tracing_data(tool,	fd, evlist,
+							  process);
+		if (err <= 0) {
+			pr_err("Couldn't record tracing data.\n");
+			return err;
+		}
+		ret += err;
+	}
+
+	return ret;
+}
diff --git a/tools/perf/util/synthetic-events.h b/tools/perf/util/synthetic-events.h
index e7a3e9589738..c845e2b9b444 100644
--- a/tools/perf/util/synthetic-events.h
+++ b/tools/perf/util/synthetic-events.h
@@ -14,6 +14,7 @@ struct evsel;
 struct machine;
 struct perf_counts_values;
 struct perf_cpu_map;
+struct perf_data;
 struct perf_event_attr;
 struct perf_event_mmap_page;
 struct perf_sample;
@@ -101,4 +102,9 @@ static inline int perf_event__synthesize_bpf_events(struct perf_session *session
 }
 #endif // HAVE_LIBBPF_SUPPORT
 
+int perf_event__synthesize_for_pipe(struct perf_tool *tool,
+				    struct perf_session *session,
+				    struct perf_data *data,
+				    perf_event__handler_t process);
+
 #endif // __PERF_SYNTHETIC_EVENTS_H
diff --git a/tools/perf/util/target.h b/tools/perf/util/target.h
index 4ff56217f2a6..daec6cba500d 100644
--- a/tools/perf/util/target.h
+++ b/tools/perf/util/target.h
@@ -17,6 +17,7 @@ struct target {
 	bool	     default_per_cpu;
 	bool	     per_thread;
 	bool	     use_bpf;
+	bool	     hybrid;
 	const char   *attr_map;
 };
 
diff --git a/tools/perf/util/trace-event.h b/tools/perf/util/trace-event.h
index 54aadeedf28c..640981105788 100644
--- a/tools/perf/util/trace-event.h
+++ b/tools/perf/util/trace-event.h
@@ -90,6 +90,9 @@ struct scripting_ops {
 	void (*process_stat)(struct perf_stat_config *config,
 			     struct evsel *evsel, u64 tstamp);
 	void (*process_stat_interval)(u64 tstamp);
+	void (*process_throttle)(union perf_event *event,
+				 struct perf_sample *sample,
+				 struct machine *machine);
 	int (*generate_script) (struct tep_handle *pevent, const char *outfile);
 };
 
diff --git a/tools/testing/ktest/examples/bootconfigs/boottrace.bconf b/tools/testing/ktest/examples/bootconfigs/boottrace.bconf
index 9db64ec589d5..7aa706cccb3b 100644
--- a/tools/testing/ktest/examples/bootconfigs/boottrace.bconf
+++ b/tools/testing/ktest/examples/bootconfigs/boottrace.bconf
@@ -10,13 +10,23 @@ ftrace.event {
 	}
 	synthetic.initcall_latency {
 		fields = "unsigned long func", "u64 lat"
-		actions = "hist:keys=func.sym,lat:vals=lat:sort=lat"
+		hist {
+			keys = func.sym,lat
+			values = lat
+			sort = lat
+		}
 	}
-	initcall.initcall_start {
-		actions = "hist:keys=func:ts0=common_timestamp.usecs"
+	initcall.initcall_start.hist {
+		keys = func;
+		var.ts0 = common_timestamp.usecs
 	}
-	initcall.initcall_finish {
-		actions = "hist:keys=func:lat=common_timestamp.usecs-$ts0:onmatch(initcall.initcall_start).initcall_latency(func,$lat)"
+	initcall.initcall_finish.hist {
+		keys = func
+		var.lat = common_timestamp.usecs - $ts0
+		onmatch {
+			event = initcall.initcall_start
+			trace = initcall_latency, func, $lat
+		}
 	}
 }
 
diff --git a/tools/testing/ktest/examples/bootconfigs/verify-boottrace.sh b/tools/testing/ktest/examples/bootconfigs/verify-boottrace.sh
index f271940ce7fb..233e95cfcf20 100755
--- a/tools/testing/ktest/examples/bootconfigs/verify-boottrace.sh
+++ b/tools/testing/ktest/examples/bootconfigs/verify-boottrace.sh
@@ -58,7 +58,7 @@ compare_file_partial "events/synthetic/initcall_latency/enable" "0"
 compare_file_partial "events/initcall/initcall_start/trigger" "hist:keys=func:vals=hitcount:ts0=common_timestamp.usecs"
 compare_file_partial "events/initcall/initcall_start/enable" "1"
 
-compare_file_partial "events/initcall/initcall_finish/trigger" 'hist:keys=func:vals=hitcount:lat=common_timestamp.usecs-\$ts0:sort=hitcount:size=2048:clock=global:onmatch(initcall.initcall_start).initcall_latency(func,\$lat)'
+compare_file_partial "events/initcall/initcall_finish/trigger" 'hist:keys=func:vals=hitcount:lat=common_timestamp.usecs-\$ts0:sort=hitcount:size=2048:clock=global:onmatch(initcall.initcall_start).trace(initcall_latency,func,\$lat)'
 compare_file_partial "events/initcall/initcall_finish/enable" "1"
 
 compare_file "instances/foo/current_tracer" "function"
diff --git a/tools/testing/selftests/bpf/prog_tests/xdp_bonding.c b/tools/testing/selftests/bpf/prog_tests/xdp_bonding.c
index 370d220288a6..ad3ba81b4048 100644
--- a/tools/testing/selftests/bpf/prog_tests/xdp_bonding.c
+++ b/tools/testing/selftests/bpf/prog_tests/xdp_bonding.c
@@ -384,8 +384,7 @@ static void test_xdp_bonding_attach(struct skeletons *skeletons)
 {
 	struct bpf_link *link = NULL;
 	struct bpf_link *link2 = NULL;
-	int veth, bond;
-	int err;
+	int veth, bond, err;
 
 	if (!ASSERT_OK(system("ip link add veth type veth"), "add veth"))
 		goto out;
@@ -399,22 +398,18 @@ static void test_xdp_bonding_attach(struct skeletons *skeletons)
 	if (!ASSERT_GE(bond, 0, "if_nametoindex bond"))
 		goto out;
 
-	/* enslaving with a XDP program loaded fails */
+	/* enslaving with a XDP program loaded is allowed */
 	link = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, veth);
 	if (!ASSERT_OK_PTR(link, "attach program to veth"))
 		goto out;
 
 	err = system("ip link set veth master bond");
-	if (!ASSERT_NEQ(err, 0, "attaching slave with xdp program expected to fail"))
+	if (!ASSERT_OK(err, "set veth master"))
 		goto out;
 
 	bpf_link__destroy(link);
 	link = NULL;
 
-	err = system("ip link set veth master bond");
-	if (!ASSERT_OK(err, "set veth master"))
-		goto out;
-
 	/* attaching to slave when master has no program is allowed */
 	link = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, veth);
 	if (!ASSERT_OK_PTR(link, "attach program to slave when enslaved"))
@@ -434,8 +429,26 @@ static void test_xdp_bonding_attach(struct skeletons *skeletons)
 		goto out;
 
 	/* attaching to slave not allowed when master has program loaded */
-	link2 = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, bond);
-	ASSERT_ERR_PTR(link2, "attach program to slave when master has program");
+	link2 = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, veth);
+	if (!ASSERT_ERR_PTR(link2, "attach program to slave when master has program"))
+		goto out;
+
+	bpf_link__destroy(link);
+	link = NULL;
+
+	/* test program unwinding with a non-XDP slave */
+	if (!ASSERT_OK(system("ip link add vxlan type vxlan id 1 remote 1.2.3.4 dstport 0 dev lo"),
+		       "add vxlan"))
+		goto out;
+
+	err = system("ip link set vxlan master bond");
+	if (!ASSERT_OK(err, "set vxlan master"))
+		goto out;
+
+	/* attaching not allowed when one slave does not support XDP */
+	link = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, bond);
+	if (!ASSERT_ERR_PTR(link, "attach program to master when slave does not support XDP"))
+		goto out;
 
 out:
 	bpf_link__destroy(link);
@@ -443,6 +456,44 @@ out:
 
 	system("ip link del veth");
 	system("ip link del bond");
+	system("ip link del vxlan");
+}
+
+/* Test with nested bonding devices to catch issue with negative jump label count */
+static void test_xdp_bonding_nested(struct skeletons *skeletons)
+{
+	struct bpf_link *link = NULL;
+	int bond, err;
+
+	if (!ASSERT_OK(system("ip link add bond type bond"), "add bond"))
+		goto out;
+
+	bond = if_nametoindex("bond");
+	if (!ASSERT_GE(bond, 0, "if_nametoindex bond"))
+		goto out;
+
+	if (!ASSERT_OK(system("ip link add bond_nest1 type bond"), "add bond_nest1"))
+		goto out;
+
+	err = system("ip link set bond_nest1 master bond");
+	if (!ASSERT_OK(err, "set bond_nest1 master"))
+		goto out;
+
+	if (!ASSERT_OK(system("ip link add bond_nest2 type bond"), "add bond_nest1"))
+		goto out;
+
+	err = system("ip link set bond_nest2 master bond_nest1");
+	if (!ASSERT_OK(err, "set bond_nest2 master"))
+		goto out;
+
+	link = bpf_program__attach_xdp(skeletons->xdp_dummy->progs.xdp_dummy_prog, bond);
+	ASSERT_OK_PTR(link, "attach program to master");
+
+out:
+	bpf_link__destroy(link);
+	system("ip link del bond");
+	system("ip link del bond_nest1");
+	system("ip link del bond_nest2");
 }
 
 static int libbpf_debug_print(enum libbpf_print_level level,
@@ -496,6 +547,9 @@ void test_xdp_bonding(void)
 	if (test__start_subtest("xdp_bonding_attach"))
 		test_xdp_bonding_attach(&skeletons);
 
+	if (test__start_subtest("xdp_bonding_nested"))
+		test_xdp_bonding_nested(&skeletons);
+
 	for (i = 0; i < ARRAY_SIZE(bond_test_cases); i++) {
 		struct bond_test_case *test_case = &bond_test_cases[i];
 
diff --git a/tools/testing/selftests/damon/Makefile b/tools/testing/selftests/damon/Makefile
new file mode 100644
index 000000000000..8a3f2cd9fec0
--- /dev/null
+++ b/tools/testing/selftests/damon/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+# Makefile for damon selftests
+
+TEST_FILES = _chk_dependency.sh
+TEST_PROGS = debugfs_attrs.sh
+
+include ../lib.mk
diff --git a/tools/testing/selftests/damon/_chk_dependency.sh b/tools/testing/selftests/damon/_chk_dependency.sh
new file mode 100644
index 000000000000..0189db81550b
--- /dev/null
+++ b/tools/testing/selftests/damon/_chk_dependency.sh
@@ -0,0 +1,28 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+DBGFS=/sys/kernel/debug/damon
+
+if [ $EUID -ne 0 ];
+then
+	echo "Run as root"
+	exit $ksft_skip
+fi
+
+if [ ! -d "$DBGFS" ]
+then
+	echo "$DBGFS not found"
+	exit $ksft_skip
+fi
+
+for f in attrs target_ids monitor_on
+do
+	if [ ! -f "$DBGFS/$f" ]
+	then
+		echo "$f not found"
+		exit 1
+	fi
+done
diff --git a/tools/testing/selftests/damon/debugfs_attrs.sh b/tools/testing/selftests/damon/debugfs_attrs.sh
new file mode 100644
index 000000000000..bfabb19dc0d3
--- /dev/null
+++ b/tools/testing/selftests/damon/debugfs_attrs.sh
@@ -0,0 +1,75 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+test_write_result() {
+	file=$1
+	content=$2
+	orig_content=$3
+	expect_reason=$4
+	expected=$5
+
+	echo "$content" > "$file"
+	if [ $? -ne "$expected" ]
+	then
+		echo "writing $content to $file doesn't return $expected"
+		echo "expected because: $expect_reason"
+		echo "$orig_content" > "$file"
+		exit 1
+	fi
+}
+
+test_write_succ() {
+	test_write_result "$1" "$2" "$3" "$4" 0
+}
+
+test_write_fail() {
+	test_write_result "$1" "$2" "$3" "$4" 1
+}
+
+test_content() {
+	file=$1
+	orig_content=$2
+	expected=$3
+	expect_reason=$4
+
+	content=$(cat "$file")
+	if [ "$content" != "$expected" ]
+	then
+		echo "reading $file expected $expected but $content"
+		echo "expected because: $expect_reason"
+		echo "$orig_content" > "$file"
+		exit 1
+	fi
+}
+
+source ./_chk_dependency.sh
+
+# Test attrs file
+# ===============
+
+file="$DBGFS/attrs"
+orig_content=$(cat "$file")
+
+test_write_succ "$file" "1 2 3 4 5" "$orig_content" "valid input"
+test_write_fail "$file" "1 2 3 4" "$orig_content" "no enough fields"
+test_write_fail "$file" "1 2 3 5 4" "$orig_content" \
+	"min_nr_regions > max_nr_regions"
+test_content "$file" "$orig_content" "1 2 3 4 5" "successfully written"
+echo "$orig_content" > "$file"
+
+# Test target_ids file
+# ====================
+
+file="$DBGFS/target_ids"
+orig_content=$(cat "$file")
+
+test_write_succ "$file" "1 2 3 4" "$orig_content" "valid input"
+test_write_succ "$file" "1 2 abc 4" "$orig_content" "still valid input"
+test_content "$file" "$orig_content" "1 2" "non-integer was there"
+test_write_succ "$file" "abc 2 3" "$orig_content" "the file allows wrong input"
+test_content "$file" "$orig_content" "" "wrong input written"
+test_write_succ "$file" "" "$orig_content" "empty input"
+test_content "$file" "$orig_content" "" "empty input written"
+echo "$orig_content" > "$file"
+
+echo "PASS"
diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc
new file mode 100644
index 000000000000..5f5b2ba3e557
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/dynevent/add_remove_eprobe.tc
@@ -0,0 +1,40 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Generic dynamic event - add/remove eprobe events
+# requires: dynamic_events events/syscalls/sys_enter_openat "e[:[<group>/]<event>] <attached-group>.<attached-event> [<args>]":README
+
+echo 0 > events/enable
+
+clear_dynamic_events
+
+SYSTEM="syscalls"
+EVENT="sys_enter_openat"
+FIELD="filename"
+EPROBE="eprobe_open"
+
+echo "e:$EPROBE $SYSTEM/$EVENT file=+0(\$filename):ustring" >> dynamic_events
+
+grep -q "$EPROBE" dynamic_events
+test -d events/eprobes/$EPROBE
+
+echo 1 > events/eprobes/$EPROBE/enable
+ls
+echo 0 > events/eprobes/$EPROBE/enable
+
+content=`grep '^ *ls-' trace | grep 'file='`
+nocontent=`grep '^ *ls-' trace | grep 'file=' | grep -v -e '"/' -e '"."' -e '(fault)' ` || true
+
+if [ -z "$content" ]; then
+	exit_fail
+fi
+
+if [ ! -z "$nocontent" ]; then
+	exit_fail
+fi
+
+echo "-:$EPROBE" >> dynamic_events
+
+! grep -q "$EPROBE" dynamic_events
+! test -d events/eprobes/$EPROBE
+
+clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc b/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc
new file mode 100644
index 000000000000..db522577ff78
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/dynevent/test_duplicates.tc
@@ -0,0 +1,38 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: Generic dynamic event - check if duplicate events are caught
+# requires: dynamic_events "e[:[<group>/]<event>] <attached-group>.<attached-event> [<args>]":README
+
+echo 0 > events/enable
+
+HAVE_KPROBES=0
+
+if [ -f kprobe_events ]; then
+	HAVE_KPROBES=1
+fi
+
+clear_dynamic_events
+
+# first create dynamic events for eprobes and kprobes.
+
+echo 'e:egroup/eevent syscalls/sys_enter_openat file=+0($filename):ustring' >> dynamic_events
+
+# Test eprobe for same eprobe, existing kprobe and existing event
+! echo 'e:egroup/eevent syscalls/sys_enter_openat file=+0($filename):ustring' >> dynamic_events
+! echo 'e:syscalls/sys_enter_open syscalls/sys_enter_openat file=+0($filename):ustring' >> dynamic_events
+
+if [ $HAVE_KPROBES -eq 1 ]; then
+    echo 'p:kgroup/kevent vfs_open file=+0($arg2)' >> dynamic_events
+    ! echo 'e:kgroup/kevent syscalls/sys_enter_openat file=+0($filename):ustring' >> dynamic_events
+
+# Test kprobe for same kprobe, existing eprobe and existing event
+    ! echo 'p:kgroup/kevent vfs_open file=+0($arg2)' >> dynamic_events
+    ! echo 'p:egroup/eevent vfs_open file=+0($arg2)' >> dynamic_events
+    ! echo 'p:syscalls/sys_enter_open vfs_open file=+0($arg2)' >> dynamic_events
+
+    echo '-:kgroup/kevent' >> dynamic_events
+fi
+
+echo '-:egroup/eevent' >> dynamic_events
+
+clear_trace
diff --git a/tools/testing/selftests/ftrace/test.d/functions b/tools/testing/selftests/ftrace/test.d/functions
index a6fac927ee82..000fd05e84b1 100644
--- a/tools/testing/selftests/ftrace/test.d/functions
+++ b/tools/testing/selftests/ftrace/test.d/functions
@@ -83,6 +83,27 @@ clear_synthetic_events() { # reset all current synthetic events
     done
 }
 
+clear_dynamic_events() { # reset all current dynamic events
+    again=1
+    stop=1
+    # loop mulitple times as some events require other to be removed first
+    while [ $again -eq 1 ]; do
+	stop=$((stop+1))
+	# Prevent infinite loops
+	if [ $stop -gt 10 ]; then
+	    break;
+	fi
+	again=2
+	grep -v '^#' dynamic_events|
+	while read line; do
+	    del=`echo $line | sed -e 's/^.\([^ ]*\).*/-\1/'`
+	    if ! echo "$del" >> dynamic_events; then
+		again=1
+	    fi
+	done
+    done
+}
+
 initialize_ftrace() { # Reset ftrace to initial-state
 # As the initial state, ftrace will be set to nop tracer,
 # no events, no triggers, no filters, no function filters,
@@ -93,6 +114,7 @@ initialize_ftrace() { # Reset ftrace to initial-state
     reset_events_filter
     reset_ftrace_filter
     disable_events
+    clear_dynamic_events
     [ -f set_event_pid ] && echo > set_event_pid
     [ -f set_ftrace_pid ] && echo > set_ftrace_pid
     [ -f set_ftrace_notrace ] && echo > set_ftrace_notrace
@@ -115,7 +137,7 @@ check_requires() { # Check required files and tracers
                 echo "Required tracer $t is not configured."
                 exit_unsupported
             fi
-        elif [ $r != $i ]; then
+        elif [ "$r" != "$i" ]; then
             if ! grep -Fq "$r" README ; then
                 echo "Required feature pattern \"$r\" is not in README."
                 exit_unsupported
diff --git a/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-eprobe.tc b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-eprobe.tc
new file mode 100644
index 000000000000..914fe2e5d030
--- /dev/null
+++ b/tools/testing/selftests/ftrace/test.d/trigger/inter-event/trigger-synthetic-eprobe.tc
@@ -0,0 +1,53 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# description: event trigger - test inter-event histogram trigger eprobe on synthetic event
+# requires: dynamic_events synthetic_events events/syscalls/sys_enter_openat/hist "e[:[<group>/]<event>] <attached-group>.<attached-event> [<args>]":README
+
+echo 0 > events/enable
+
+clear_dynamic_events
+
+SYSTEM="syscalls"
+START="sys_enter_openat"
+END="sys_exit_openat"
+FIELD="filename"
+SYNTH="synth_open"
+EPROBE="eprobe_open"
+
+echo "$SYNTH u64 filename; s64 ret;" > synthetic_events
+echo "hist:keys=common_pid:__arg__1=$FIELD" > events/$SYSTEM/$START/trigger
+echo "hist:keys=common_pid:filename=\$__arg__1,ret=ret:onmatch($SYSTEM.$START).trace($SYNTH,\$filename,\$ret)" > events/$SYSTEM/$END/trigger
+
+echo "e:$EPROBE synthetic/$SYNTH file=+0(\$filename):ustring ret=\$ret:s64" >> dynamic_events
+
+grep -q "$SYNTH" dynamic_events
+grep -q "$EPROBE" dynamic_events
+test -d events/synthetic/$SYNTH
+test -d events/eprobes/$EPROBE
+
+echo 1 > events/eprobes/$EPROBE/enable
+ls
+echo 0 > events/eprobes/$EPROBE/enable
+
+content=`grep '^ *ls-' trace | grep 'file='`
+nocontent=`grep '^ *ls-' trace | grep 'file=' | grep -v -e '"/' -e '"."'` || true
+
+if [ -z "$content" ]; then
+	exit_fail
+fi
+
+if [ ! -z "$nocontent" ]; then
+	exit_fail
+fi
+
+echo "-:$EPROBE" >> dynamic_events
+echo '!'"hist:keys=common_pid:filename=\$__arg__1,ret=ret:onmatch($SYSTEM.$START).trace($SYNTH,\$filename,\$ret)" > events/$SYSTEM/$END/trigger
+echo '!'"hist:keys=common_pid:__arg__1=$FIELD" > events/$SYSTEM/$START/trigger
+echo '!'"$SYNTH u64 filename; s64 ret;" >> synthetic_events
+
+! grep -q "$SYNTH" dynamic_events
+! grep -q "$EPROBE" dynamic_events
+! test -d events/synthetic/$SYNTH
+! test -d events/eprobes/$EPROBE
+
+clear_trace
diff --git a/tools/testing/selftests/kvm/.gitignore b/tools/testing/selftests/kvm/.gitignore
index 0709af0144c8..98053d3afbda 100644
--- a/tools/testing/selftests/kvm/.gitignore
+++ b/tools/testing/selftests/kvm/.gitignore
@@ -1,6 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
 /aarch64/debug-exceptions
 /aarch64/get-reg-list
+/aarch64/psci_cpu_on_test
 /aarch64/vgic_init
 /s390x/memop
 /s390x/resets
diff --git a/tools/testing/selftests/kvm/Makefile b/tools/testing/selftests/kvm/Makefile
index 5832f510a16c..5d05801ab816 100644
--- a/tools/testing/selftests/kvm/Makefile
+++ b/tools/testing/selftests/kvm/Makefile
@@ -86,6 +86,7 @@ TEST_GEN_PROGS_x86_64 += kvm_binary_stats_test
 
 TEST_GEN_PROGS_aarch64 += aarch64/debug-exceptions
 TEST_GEN_PROGS_aarch64 += aarch64/get-reg-list
+TEST_GEN_PROGS_aarch64 += aarch64/psci_cpu_on_test
 TEST_GEN_PROGS_aarch64 += aarch64/vgic_init
 TEST_GEN_PROGS_aarch64 += demand_paging_test
 TEST_GEN_PROGS_aarch64 += dirty_log_test
diff --git a/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c b/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c
new file mode 100644
index 000000000000..018c269990e1
--- /dev/null
+++ b/tools/testing/selftests/kvm/aarch64/psci_cpu_on_test.c
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * psci_cpu_on_test - Test that the observable state of a vCPU targeted by the
+ * CPU_ON PSCI call matches what the caller requested.
+ *
+ * Copyright (c) 2021 Google LLC.
+ *
+ * This is a regression test for a race between KVM servicing the PSCI call and
+ * userspace reading the vCPUs registers.
+ */
+
+#define _GNU_SOURCE
+
+#include <linux/psci.h>
+
+#include "kvm_util.h"
+#include "processor.h"
+#include "test_util.h"
+
+#define VCPU_ID_SOURCE 0
+#define VCPU_ID_TARGET 1
+
+#define CPU_ON_ENTRY_ADDR 0xfeedf00dul
+#define CPU_ON_CONTEXT_ID 0xdeadc0deul
+
+static uint64_t psci_cpu_on(uint64_t target_cpu, uint64_t entry_addr,
+			    uint64_t context_id)
+{
+	register uint64_t x0 asm("x0") = PSCI_0_2_FN64_CPU_ON;
+	register uint64_t x1 asm("x1") = target_cpu;
+	register uint64_t x2 asm("x2") = entry_addr;
+	register uint64_t x3 asm("x3") = context_id;
+
+	asm("hvc #0"
+	    : "=r"(x0)
+	    : "r"(x0), "r"(x1), "r"(x2), "r"(x3)
+	    : "memory");
+
+	return x0;
+}
+
+static uint64_t psci_affinity_info(uint64_t target_affinity,
+				   uint64_t lowest_affinity_level)
+{
+	register uint64_t x0 asm("x0") = PSCI_0_2_FN64_AFFINITY_INFO;
+	register uint64_t x1 asm("x1") = target_affinity;
+	register uint64_t x2 asm("x2") = lowest_affinity_level;
+
+	asm("hvc #0"
+	    : "=r"(x0)
+	    : "r"(x0), "r"(x1), "r"(x2)
+	    : "memory");
+
+	return x0;
+}
+
+static void guest_main(uint64_t target_cpu)
+{
+	GUEST_ASSERT(!psci_cpu_on(target_cpu, CPU_ON_ENTRY_ADDR, CPU_ON_CONTEXT_ID));
+	uint64_t target_state;
+
+	do {
+		target_state = psci_affinity_info(target_cpu, 0);
+
+		GUEST_ASSERT((target_state == PSCI_0_2_AFFINITY_LEVEL_ON) ||
+			     (target_state == PSCI_0_2_AFFINITY_LEVEL_OFF));
+	} while (target_state != PSCI_0_2_AFFINITY_LEVEL_ON);
+
+	GUEST_DONE();
+}
+
+int main(void)
+{
+	uint64_t target_mpidr, obs_pc, obs_x0;
+	struct kvm_vcpu_init init;
+	struct kvm_vm *vm;
+	struct ucall uc;
+
+	vm = vm_create(VM_MODE_DEFAULT, DEFAULT_GUEST_PHY_PAGES, O_RDWR);
+	kvm_vm_elf_load(vm, program_invocation_name);
+	ucall_init(vm, NULL);
+
+	vm_ioctl(vm, KVM_ARM_PREFERRED_TARGET, &init);
+	init.features[0] |= (1 << KVM_ARM_VCPU_PSCI_0_2);
+
+	aarch64_vcpu_add_default(vm, VCPU_ID_SOURCE, &init, guest_main);
+
+	/*
+	 * make sure the target is already off when executing the test.
+	 */
+	init.features[0] |= (1 << KVM_ARM_VCPU_POWER_OFF);
+	aarch64_vcpu_add_default(vm, VCPU_ID_TARGET, &init, guest_main);
+
+	get_reg(vm, VCPU_ID_TARGET, ARM64_SYS_REG(MPIDR_EL1), &target_mpidr);
+	vcpu_args_set(vm, VCPU_ID_SOURCE, 1, target_mpidr & MPIDR_HWID_BITMASK);
+	vcpu_run(vm, VCPU_ID_SOURCE);
+
+	switch (get_ucall(vm, VCPU_ID_SOURCE, &uc)) {
+	case UCALL_DONE:
+		break;
+	case UCALL_ABORT:
+		TEST_FAIL("%s at %s:%ld", (const char *)uc.args[0], __FILE__,
+			  uc.args[1]);
+		break;
+	default:
+		TEST_FAIL("Unhandled ucall: %lu", uc.cmd);
+	}
+
+	get_reg(vm, VCPU_ID_TARGET, ARM64_CORE_REG(regs.pc), &obs_pc);
+	get_reg(vm, VCPU_ID_TARGET, ARM64_CORE_REG(regs.regs[0]), &obs_x0);
+
+	TEST_ASSERT(obs_pc == CPU_ON_ENTRY_ADDR,
+		    "unexpected target cpu pc: %lx (expected: %lx)",
+		    obs_pc, CPU_ON_ENTRY_ADDR);
+	TEST_ASSERT(obs_x0 == CPU_ON_CONTEXT_ID,
+		    "unexpected target context id: %lx (expected: %lx)",
+		    obs_x0, CPU_ON_CONTEXT_ID);
+
+	kvm_vm_free(vm);
+	return 0;
+}
diff --git a/tools/testing/selftests/kvm/access_tracking_perf_test.c b/tools/testing/selftests/kvm/access_tracking_perf_test.c
index e2baa187a21e..71e277c7c3f3 100644
--- a/tools/testing/selftests/kvm/access_tracking_perf_test.c
+++ b/tools/testing/selftests/kvm/access_tracking_perf_test.c
@@ -222,8 +222,6 @@ static void *vcpu_thread_main(void *arg)
 	int vcpu_id = vcpu_args->vcpu_id;
 	int current_iteration = -1;
 
-	vcpu_args_set(vm, vcpu_id, 1, vcpu_id);
-
 	while (spin_wait_for_next_iteration(&current_iteration)) {
 		switch (READ_ONCE(iteration_work)) {
 		case ITERATION_ACCESS_MEMORY:
@@ -333,7 +331,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 	pthread_t *vcpu_threads;
 	int vcpus = params->vcpus;
 
-	vm = perf_test_create_vm(mode, vcpus, params->vcpu_memory_bytes,
+	vm = perf_test_create_vm(mode, vcpus, params->vcpu_memory_bytes, 1,
 				 params->backing_src);
 
 	perf_test_setup_vcpus(vm, vcpus, params->vcpu_memory_bytes,
diff --git a/tools/testing/selftests/kvm/demand_paging_test.c b/tools/testing/selftests/kvm/demand_paging_test.c
index b74704305835..e79c1b64977f 100644
--- a/tools/testing/selftests/kvm/demand_paging_test.c
+++ b/tools/testing/selftests/kvm/demand_paging_test.c
@@ -52,7 +52,6 @@ static void *vcpu_worker(void *data)
 	struct timespec start;
 	struct timespec ts_diff;
 
-	vcpu_args_set(vm, vcpu_id, 1, vcpu_id);
 	run = vcpu_state(vm, vcpu_id);
 
 	clock_gettime(CLOCK_MONOTONIC, &start);
@@ -293,7 +292,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 	int vcpu_id;
 	int r;
 
-	vm = perf_test_create_vm(mode, nr_vcpus, guest_percpu_mem_size,
+	vm = perf_test_create_vm(mode, nr_vcpus, guest_percpu_mem_size, 1,
 				 p->src_type);
 
 	perf_test_args.wr_fract = 1;
diff --git a/tools/testing/selftests/kvm/dirty_log_perf_test.c b/tools/testing/selftests/kvm/dirty_log_perf_test.c
index 80cbd3a748c0..479868570d59 100644
--- a/tools/testing/selftests/kvm/dirty_log_perf_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_perf_test.c
@@ -44,7 +44,6 @@ static void *vcpu_worker(void *data)
 	struct perf_test_vcpu_args *vcpu_args = (struct perf_test_vcpu_args *)data;
 	int vcpu_id = vcpu_args->vcpu_id;
 
-	vcpu_args_set(vm, vcpu_id, 1, vcpu_id);
 	run = vcpu_state(vm, vcpu_id);
 
 	while (!READ_ONCE(host_quit)) {
@@ -94,8 +93,59 @@ struct test_params {
 	int wr_fract;
 	bool partition_vcpu_memory_access;
 	enum vm_mem_backing_src_type backing_src;
+	int slots;
 };
 
+static void toggle_dirty_logging(struct kvm_vm *vm, int slots, bool enable)
+{
+	int i;
+
+	for (i = 0; i < slots; i++) {
+		int slot = PERF_TEST_MEM_SLOT_INDEX + i;
+		int flags = enable ? KVM_MEM_LOG_DIRTY_PAGES : 0;
+
+		vm_mem_region_set_flags(vm, slot, flags);
+	}
+}
+
+static inline void enable_dirty_logging(struct kvm_vm *vm, int slots)
+{
+	toggle_dirty_logging(vm, slots, true);
+}
+
+static inline void disable_dirty_logging(struct kvm_vm *vm, int slots)
+{
+	toggle_dirty_logging(vm, slots, false);
+}
+
+static void get_dirty_log(struct kvm_vm *vm, int slots, unsigned long *bitmap,
+			  uint64_t nr_pages)
+{
+	uint64_t slot_pages = nr_pages / slots;
+	int i;
+
+	for (i = 0; i < slots; i++) {
+		int slot = PERF_TEST_MEM_SLOT_INDEX + i;
+		unsigned long *slot_bitmap = bitmap + i * slot_pages;
+
+		kvm_vm_get_dirty_log(vm, slot, slot_bitmap);
+	}
+}
+
+static void clear_dirty_log(struct kvm_vm *vm, int slots, unsigned long *bitmap,
+			    uint64_t nr_pages)
+{
+	uint64_t slot_pages = nr_pages / slots;
+	int i;
+
+	for (i = 0; i < slots; i++) {
+		int slot = PERF_TEST_MEM_SLOT_INDEX + i;
+		unsigned long *slot_bitmap = bitmap + i * slot_pages;
+
+		kvm_vm_clear_dirty_log(vm, slot, slot_bitmap, 0, slot_pages);
+	}
+}
+
 static void run_test(enum vm_guest_mode mode, void *arg)
 {
 	struct test_params *p = arg;
@@ -114,14 +164,14 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 	struct timespec clear_dirty_log_total = (struct timespec){0};
 
 	vm = perf_test_create_vm(mode, nr_vcpus, guest_percpu_mem_size,
-				 p->backing_src);
+				 p->slots, p->backing_src);
 
 	perf_test_args.wr_fract = p->wr_fract;
 
 	guest_num_pages = (nr_vcpus * guest_percpu_mem_size) >> vm_get_page_shift(vm);
 	guest_num_pages = vm_adjust_num_guest_pages(mode, guest_num_pages);
 	host_num_pages = vm_num_host_pages(mode, guest_num_pages);
-	bmap = bitmap_alloc(host_num_pages);
+	bmap = bitmap_zalloc(host_num_pages);
 
 	if (dirty_log_manual_caps) {
 		cap.cap = KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2;
@@ -163,8 +213,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 
 	/* Enable dirty logging */
 	clock_gettime(CLOCK_MONOTONIC, &start);
-	vm_mem_region_set_flags(vm, PERF_TEST_MEM_SLOT_INDEX,
-				KVM_MEM_LOG_DIRTY_PAGES);
+	enable_dirty_logging(vm, p->slots);
 	ts_diff = timespec_elapsed(start);
 	pr_info("Enabling dirty logging time: %ld.%.9lds\n\n",
 		ts_diff.tv_sec, ts_diff.tv_nsec);
@@ -190,8 +239,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 			iteration, ts_diff.tv_sec, ts_diff.tv_nsec);
 
 		clock_gettime(CLOCK_MONOTONIC, &start);
-		kvm_vm_get_dirty_log(vm, PERF_TEST_MEM_SLOT_INDEX, bmap);
-
+		get_dirty_log(vm, p->slots, bmap, host_num_pages);
 		ts_diff = timespec_elapsed(start);
 		get_dirty_log_total = timespec_add(get_dirty_log_total,
 						   ts_diff);
@@ -200,9 +248,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 
 		if (dirty_log_manual_caps) {
 			clock_gettime(CLOCK_MONOTONIC, &start);
-			kvm_vm_clear_dirty_log(vm, PERF_TEST_MEM_SLOT_INDEX, bmap, 0,
-					       host_num_pages);
-
+			clear_dirty_log(vm, p->slots, bmap, host_num_pages);
 			ts_diff = timespec_elapsed(start);
 			clear_dirty_log_total = timespec_add(clear_dirty_log_total,
 							     ts_diff);
@@ -213,7 +259,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 
 	/* Disable dirty logging */
 	clock_gettime(CLOCK_MONOTONIC, &start);
-	vm_mem_region_set_flags(vm, PERF_TEST_MEM_SLOT_INDEX, 0);
+	disable_dirty_logging(vm, p->slots);
 	ts_diff = timespec_elapsed(start);
 	pr_info("Disabling dirty logging time: %ld.%.9lds\n",
 		ts_diff.tv_sec, ts_diff.tv_nsec);
@@ -244,7 +290,8 @@ static void help(char *name)
 {
 	puts("");
 	printf("usage: %s [-h] [-i iterations] [-p offset] "
-	       "[-m mode] [-b vcpu bytes] [-v vcpus] [-o] [-s mem type]\n", name);
+	       "[-m mode] [-b vcpu bytes] [-v vcpus] [-o] [-s mem type]"
+	       "[-x memslots]\n", name);
 	puts("");
 	printf(" -i: specify iteration counts (default: %"PRIu64")\n",
 	       TEST_HOST_LOOP_N);
@@ -263,6 +310,8 @@ static void help(char *name)
 	       "     them into a separate region of memory for each vCPU.\n");
 	printf(" -s: specify the type of memory that should be used to\n"
 	       "     back the guest data region.\n\n");
+	printf(" -x: Split the memory region into this number of memslots.\n"
+	       "     (default: 1)");
 	backing_src_help();
 	puts("");
 	exit(0);
@@ -276,6 +325,7 @@ int main(int argc, char *argv[])
 		.wr_fract = 1,
 		.partition_vcpu_memory_access = true,
 		.backing_src = VM_MEM_SRC_ANONYMOUS,
+		.slots = 1,
 	};
 	int opt;
 
@@ -286,7 +336,7 @@ int main(int argc, char *argv[])
 
 	guest_modes_append_default();
 
-	while ((opt = getopt(argc, argv, "hi:p:m:b:f:v:os:")) != -1) {
+	while ((opt = getopt(argc, argv, "hi:p:m:b:f:v:os:x:")) != -1) {
 		switch (opt) {
 		case 'i':
 			p.iterations = atoi(optarg);
@@ -316,6 +366,9 @@ int main(int argc, char *argv[])
 		case 's':
 			p.backing_src = parse_backing_src_type(optarg);
 			break;
+		case 'x':
+			p.slots = atoi(optarg);
+			break;
 		case 'h':
 		default:
 			help(argv[0]);
diff --git a/tools/testing/selftests/kvm/dirty_log_test.c b/tools/testing/selftests/kvm/dirty_log_test.c
index 5fe0140e407e..792c60e1b17d 100644
--- a/tools/testing/selftests/kvm/dirty_log_test.c
+++ b/tools/testing/selftests/kvm/dirty_log_test.c
@@ -749,8 +749,8 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 
 	pr_info("guest physical test memory offset: 0x%lx\n", guest_test_phys_mem);
 
-	bmap = bitmap_alloc(host_num_pages);
-	host_bmap_track = bitmap_alloc(host_num_pages);
+	bmap = bitmap_zalloc(host_num_pages);
+	host_bmap_track = bitmap_zalloc(host_num_pages);
 
 	/* Add an extra memory slot for testing dirty logging */
 	vm_userspace_mem_region_add(vm, VM_MEM_SRC_ANONYMOUS,
diff --git a/tools/testing/selftests/kvm/include/aarch64/processor.h b/tools/testing/selftests/kvm/include/aarch64/processor.h
index 27dc5c2e56b9..c0273aefa63d 100644
--- a/tools/testing/selftests/kvm/include/aarch64/processor.h
+++ b/tools/testing/selftests/kvm/include/aarch64/processor.h
@@ -17,6 +17,7 @@
 #define CPACR_EL1               3, 0,  1, 0, 2
 #define TCR_EL1                 3, 0,  2, 0, 2
 #define MAIR_EL1                3, 0, 10, 2, 0
+#define MPIDR_EL1               3, 0,  0, 0, 5
 #define TTBR0_EL1               3, 0,  2, 0, 0
 #define SCTLR_EL1               3, 0,  1, 0, 0
 #define VBAR_EL1                3, 0, 12, 0, 0
@@ -40,6 +41,8 @@
 			  (0xfful << (4 * 8)) | \
 			  (0xbbul << (5 * 8)))
 
+#define MPIDR_HWID_BITMASK (0xff00fffffful)
+
 static inline void get_reg(struct kvm_vm *vm, uint32_t vcpuid, uint64_t id, uint64_t *addr)
 {
 	struct kvm_one_reg reg;
diff --git a/tools/testing/selftests/kvm/include/perf_test_util.h b/tools/testing/selftests/kvm/include/perf_test_util.h
index 005f2143adeb..df9f1a3a3ffb 100644
--- a/tools/testing/selftests/kvm/include/perf_test_util.h
+++ b/tools/testing/selftests/kvm/include/perf_test_util.h
@@ -44,7 +44,7 @@ extern struct perf_test_args perf_test_args;
 extern uint64_t guest_test_phys_mem;
 
 struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus,
-				   uint64_t vcpu_memory_bytes,
+				   uint64_t vcpu_memory_bytes, int slots,
 				   enum vm_mem_backing_src_type backing_src);
 void perf_test_destroy_vm(struct kvm_vm *vm);
 void perf_test_setup_vcpus(struct kvm_vm *vm, int vcpus,
diff --git a/tools/testing/selftests/kvm/kvm_binary_stats_test.c b/tools/testing/selftests/kvm/kvm_binary_stats_test.c
index 5906bbc08483..17f65d514915 100644
--- a/tools/testing/selftests/kvm/kvm_binary_stats_test.c
+++ b/tools/testing/selftests/kvm/kvm_binary_stats_test.c
@@ -109,6 +109,18 @@ static void stats_test(int stats_fd)
 		/* Check size field, which should not be zero */
 		TEST_ASSERT(pdesc->size, "KVM descriptor(%s) with size of 0",
 				pdesc->name);
+		/* Check bucket_size field */
+		switch (pdesc->flags & KVM_STATS_TYPE_MASK) {
+		case KVM_STATS_TYPE_LINEAR_HIST:
+			TEST_ASSERT(pdesc->bucket_size,
+			    "Bucket size of Linear Histogram stats (%s) is zero",
+			    pdesc->name);
+			break;
+		default:
+			TEST_ASSERT(!pdesc->bucket_size,
+			    "Bucket size of stats (%s) is not zero",
+			    pdesc->name);
+		}
 		size_data += pdesc->size * sizeof(*stats_data);
 	}
 	/* Check overlap */
diff --git a/tools/testing/selftests/kvm/lib/perf_test_util.c b/tools/testing/selftests/kvm/lib/perf_test_util.c
index b488f4aefea8..0ef80dbdc116 100644
--- a/tools/testing/selftests/kvm/lib/perf_test_util.c
+++ b/tools/testing/selftests/kvm/lib/perf_test_util.c
@@ -50,11 +50,12 @@ static void guest_code(uint32_t vcpu_id)
 }
 
 struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus,
-				   uint64_t vcpu_memory_bytes,
+				   uint64_t vcpu_memory_bytes, int slots,
 				   enum vm_mem_backing_src_type backing_src)
 {
 	struct kvm_vm *vm;
 	uint64_t guest_num_pages;
+	int i;
 
 	pr_info("Testing guest mode: %s\n", vm_guest_mode_string(mode));
 
@@ -68,6 +69,9 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus,
 		    "Guest memory size is not host page size aligned.");
 	TEST_ASSERT(vcpu_memory_bytes % perf_test_args.guest_page_size == 0,
 		    "Guest memory size is not guest page size aligned.");
+	TEST_ASSERT(guest_num_pages % slots == 0,
+		    "Guest memory cannot be evenly divided into %d slots.",
+		    slots);
 
 	vm = vm_create_with_vcpus(mode, vcpus, DEFAULT_GUEST_PHY_PAGES,
 				  (vcpus * vcpu_memory_bytes) / perf_test_args.guest_page_size,
@@ -95,10 +99,16 @@ struct kvm_vm *perf_test_create_vm(enum vm_guest_mode mode, int vcpus,
 #endif
 	pr_info("guest physical test memory offset: 0x%lx\n", guest_test_phys_mem);
 
-	/* Add an extra memory slot for testing */
-	vm_userspace_mem_region_add(vm, backing_src, guest_test_phys_mem,
-				    PERF_TEST_MEM_SLOT_INDEX,
-				    guest_num_pages, 0);
+	/* Add extra memory slots for testing */
+	for (i = 0; i < slots; i++) {
+		uint64_t region_pages = guest_num_pages / slots;
+		vm_paddr_t region_start = guest_test_phys_mem +
+			region_pages * perf_test_args.guest_page_size * i;
+
+		vm_userspace_mem_region_add(vm, backing_src, region_start,
+					    PERF_TEST_MEM_SLOT_INDEX + i,
+					    region_pages, 0);
+	}
 
 	/* Do mapping for the demand paging memory slot */
 	virt_map(vm, guest_test_virt_mem, guest_test_phys_mem, guest_num_pages);
@@ -140,6 +150,8 @@ void perf_test_setup_vcpus(struct kvm_vm *vm, int vcpus,
 			vcpu_gpa = guest_test_phys_mem;
 		}
 
+		vcpu_args_set(vm, vcpu_id, 1, vcpu_id);
+
 		pr_debug("Added VCPU %d with test mem gpa [%lx, %lx)\n",
 			 vcpu_id, vcpu_gpa, vcpu_gpa +
 			 (vcpu_args->pages * perf_test_args.guest_page_size));
diff --git a/tools/testing/selftests/kvm/memslot_modification_stress_test.c b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
index 98351ba0933c..4cfcafea9f5a 100644
--- a/tools/testing/selftests/kvm/memslot_modification_stress_test.c
+++ b/tools/testing/selftests/kvm/memslot_modification_stress_test.c
@@ -45,7 +45,6 @@ static void *vcpu_worker(void *data)
 	struct kvm_vm *vm = perf_test_args.vm;
 	struct kvm_run *run;
 
-	vcpu_args_set(vm, vcpu_id, 1, vcpu_id);
 	run = vcpu_state(vm, vcpu_id);
 
 	/* Let the guest access its memory until a stop signal is received */
@@ -105,7 +104,7 @@ static void run_test(enum vm_guest_mode mode, void *arg)
 	struct kvm_vm *vm;
 	int vcpu_id;
 
-	vm = perf_test_create_vm(mode, nr_vcpus, guest_percpu_mem_size,
+	vm = perf_test_create_vm(mode, nr_vcpus, guest_percpu_mem_size, 1,
 				 VM_MEM_SRC_ANONYMOUS);
 
 	perf_test_args.wr_fract = 1;
diff --git a/tools/testing/selftests/kvm/x86_64/debug_regs.c b/tools/testing/selftests/kvm/x86_64/debug_regs.c
index 6097a8283377..5f078db1bcba 100644
--- a/tools/testing/selftests/kvm/x86_64/debug_regs.c
+++ b/tools/testing/selftests/kvm/x86_64/debug_regs.c
@@ -8,12 +8,15 @@
 #include <string.h>
 #include "kvm_util.h"
 #include "processor.h"
+#include "apic.h"
 
 #define VCPU_ID 0
 
 #define DR6_BD		(1 << 13)
 #define DR7_GD		(1 << 13)
 
+#define IRQ_VECTOR 0xAA
+
 /* For testing data access debug BP */
 uint32_t guest_value;
 
@@ -21,6 +24,11 @@ extern unsigned char sw_bp, hw_bp, write_data, ss_start, bd_start;
 
 static void guest_code(void)
 {
+	/* Create a pending interrupt on current vCPU */
+	x2apic_enable();
+	x2apic_write_reg(APIC_ICR, APIC_DEST_SELF | APIC_INT_ASSERT |
+			 APIC_DM_FIXED | IRQ_VECTOR);
+
 	/*
 	 * Software BP tests.
 	 *
@@ -38,12 +46,19 @@ static void guest_code(void)
 		     "mov %%rax,%0;\n\t write_data:"
 		     : "=m" (guest_value) : : "rax");
 
-	/* Single step test, covers 2 basic instructions and 2 emulated */
+	/*
+	 * Single step test, covers 2 basic instructions and 2 emulated
+	 *
+	 * Enable interrupts during the single stepping to see that
+	 * pending interrupt we raised is not handled due to KVM_GUESTDBG_BLOCKIRQ
+	 */
 	asm volatile("ss_start: "
+		     "sti\n\t"
 		     "xor %%eax,%%eax\n\t"
 		     "cpuid\n\t"
 		     "movl $0x1a0,%%ecx\n\t"
 		     "rdmsr\n\t"
+		     "cli\n\t"
 		     : : : "eax", "ebx", "ecx", "edx");
 
 	/* DR6.BD test */
@@ -72,11 +87,13 @@ int main(void)
 	uint64_t cmd;
 	int i;
 	/* Instruction lengths starting at ss_start */
-	int ss_size[4] = {
+	int ss_size[6] = {
+		1,		/* sti*/
 		2,		/* xor */
 		2,		/* cpuid */
 		5,		/* mov */
 		2,		/* rdmsr */
+		1,		/* cli */
 	};
 
 	if (!kvm_check_cap(KVM_CAP_SET_GUEST_DEBUG)) {
@@ -154,7 +171,8 @@ int main(void)
 	for (i = 0; i < (sizeof(ss_size) / sizeof(ss_size[0])); i++) {
 		target_rip += ss_size[i];
 		CLEAR_DEBUG();
-		debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP;
+		debug.control = KVM_GUESTDBG_ENABLE | KVM_GUESTDBG_SINGLESTEP |
+				KVM_GUESTDBG_BLOCKIRQ;
 		debug.arch.debugreg[7] = 0x00000400;
 		APPLY_DEBUG();
 		vcpu_run(vm, VCPU_ID);
diff --git a/tools/testing/selftests/kvm/x86_64/vmx_dirty_log_test.c b/tools/testing/selftests/kvm/x86_64/vmx_dirty_log_test.c
index 06a64980a5d2..68f26a8b4f42 100644
--- a/tools/testing/selftests/kvm/x86_64/vmx_dirty_log_test.c
+++ b/tools/testing/selftests/kvm/x86_64/vmx_dirty_log_test.c
@@ -111,7 +111,7 @@ int main(int argc, char *argv[])
 	nested_map(vmx, vm, NESTED_TEST_MEM1, GUEST_TEST_MEM, 4096);
 	nested_map(vmx, vm, NESTED_TEST_MEM2, GUEST_TEST_MEM, 4096);
 
-	bmap = bitmap_alloc(TEST_MEM_PAGES);
+	bmap = bitmap_zalloc(TEST_MEM_PAGES);
 	host_test_mem = addr_gpa2hva(vm, GUEST_TEST_MEM);
 
 	while (!done) {
diff --git a/tools/testing/selftests/memfd/memfd_test.c b/tools/testing/selftests/memfd/memfd_test.c
index 74baab83fec3..192a2899bae8 100644
--- a/tools/testing/selftests/memfd/memfd_test.c
+++ b/tools/testing/selftests/memfd/memfd_test.c
@@ -56,7 +56,7 @@ static int mfd_assert_new(const char *name, loff_t sz, unsigned int flags)
 
 static int mfd_assert_reopen_fd(int fd_in)
 {
-	int r, fd;
+	int fd;
 	char path[100];
 
 	sprintf(path, "/proc/self/fd/%d", fd_in);
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 378c0aac5a1a..492b273743b4 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -27,6 +27,7 @@ TEST_PROGS += udpgro_fwd.sh
 TEST_PROGS += veth.sh
 TEST_PROGS += ioam6.sh
 TEST_PROGS += gro.sh
+TEST_PROGS += gre_gso.sh
 TEST_PROGS_EXTENDED := in_netns.sh
 TEST_GEN_FILES =  socket nettest
 TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy reuseport_addr_any
diff --git a/tools/testing/selftests/net/gre_gso.sh b/tools/testing/selftests/net/gre_gso.sh
new file mode 100755
index 000000000000..facbb0c80443
--- /dev/null
+++ b/tools/testing/selftests/net/gre_gso.sh
@@ -0,0 +1,236 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking GRE GSO.
+
+ret=0
+# Kselftest framework requirement - SKIP code is 4.
+ksft_skip=4
+
+# all tests in this script. Can be overridden with -t option
+TESTS="gre_gso"
+
+VERBOSE=0
+PAUSE_ON_FAIL=no
+PAUSE=no
+IP="ip -netns ns1"
+NS_EXEC="ip netns exec ns1"
+TMPFILE=`mktemp`
+PID=
+
+log_test()
+{
+	local rc=$1
+	local expected=$2
+	local msg="$3"
+
+	if [ ${rc} -eq ${expected} ]; then
+		printf "    TEST: %-60s  [ OK ]\n" "${msg}"
+		nsuccess=$((nsuccess+1))
+	else
+		ret=1
+		nfail=$((nfail+1))
+		printf "    TEST: %-60s  [FAIL]\n" "${msg}"
+		if [ "${PAUSE_ON_FAIL}" = "yes" ]; then
+		echo
+			echo "hit enter to continue, 'q' to quit"
+			read a
+			[ "$a" = "q" ] && exit 1
+		fi
+	fi
+
+	if [ "${PAUSE}" = "yes" ]; then
+		echo
+		echo "hit enter to continue, 'q' to quit"
+		read a
+		[ "$a" = "q" ] && exit 1
+	fi
+}
+
+setup()
+{
+	set -e
+	ip netns add ns1
+	ip netns set ns1 auto
+	$IP link set dev lo up
+
+	ip link add veth0 type veth peer name veth1
+	ip link set veth0 up
+	ip link set veth1 netns ns1
+	$IP link set veth1 name veth0
+	$IP link set veth0 up
+
+	dd if=/dev/urandom of=$TMPFILE bs=1024 count=2048 &>/dev/null
+	set +e
+}
+
+cleanup()
+{
+	rm -rf $TMPFILE
+	[ -n "$PID" ] && kill $PID
+	ip link del dev gre1 &> /dev/null
+	ip link del dev veth0 &> /dev/null
+	ip netns del ns1
+}
+
+get_linklocal()
+{
+	local dev=$1
+	local ns=$2
+	local addr
+
+	[ -n "$ns" ] && ns="-netns $ns"
+
+	addr=$(ip -6 -br $ns addr show dev ${dev} | \
+	awk '{
+		for (i = 3; i <= NF; ++i) {
+			if ($i ~ /^fe80/)
+				print $i
+		}
+	}'
+	)
+	addr=${addr/\/*}
+
+	[ -z "$addr" ] && return 1
+
+	echo $addr
+
+	return 0
+}
+
+gre_create_tun()
+{
+	local a1=$1
+	local a2=$2
+	local mode
+
+	[[ $a1 =~ ^[0-9.]*$ ]] && mode=gre || mode=ip6gre
+
+	ip tunnel add gre1 mode $mode local $a1 remote $a2 dev veth0
+	ip link set gre1 up
+	$IP tunnel add gre1 mode $mode local $a2 remote $a1 dev veth0
+	$IP link set gre1 up
+}
+
+gre_gst_test_checks()
+{
+	local name=$1
+	local addr=$2
+
+	$NS_EXEC nc -kl $port >/dev/null &
+	PID=$!
+	while ! $NS_EXEC ss -ltn | grep -q $port; do ((i++)); sleep 0.01; done
+
+	cat $TMPFILE | timeout 1 nc $addr $port
+	log_test $? 0 "$name - copy file w/ TSO"
+
+	ethtool -K veth0 tso off
+
+	cat $TMPFILE | timeout 1 nc $addr $port
+	log_test $? 0 "$name - copy file w/ GSO"
+
+	ethtool -K veth0 tso on
+
+	kill $PID
+	PID=
+}
+
+gre6_gso_test()
+{
+	local port=7777
+
+	setup
+
+	a1=$(get_linklocal veth0)
+	a2=$(get_linklocal veth0 ns1)
+
+	gre_create_tun $a1 $a2
+
+	ip  addr add 172.16.2.1/24 dev gre1
+	$IP addr add 172.16.2.2/24 dev gre1
+
+	ip  -6 addr add 2001:db8:1::1/64 dev gre1 nodad
+	$IP -6 addr add 2001:db8:1::2/64 dev gre1 nodad
+
+	sleep 2
+
+	gre_gst_test_checks GREv6/v4 172.16.2.2
+	gre_gst_test_checks GREv6/v6 2001:db8:1::2
+
+	cleanup
+}
+
+gre_gso_test()
+{
+	gre6_gso_test
+}
+
+################################################################################
+# usage
+
+usage()
+{
+	cat <<EOF
+usage: ${0##*/} OPTS
+
+        -t <test>   Test(s) to run (default: all)
+                    (options: $TESTS)
+        -p          Pause on fail
+        -P          Pause after each test before cleanup
+        -v          verbose mode (show commands and output)
+EOF
+}
+
+################################################################################
+# main
+
+while getopts :t:pPhv o
+do
+	case $o in
+		t) TESTS=$OPTARG;;
+		p) PAUSE_ON_FAIL=yes;;
+		P) PAUSE=yes;;
+		v) VERBOSE=$(($VERBOSE + 1));;
+		h) usage; exit 0;;
+		*) usage; exit 1;;
+	esac
+done
+
+PEER_CMD="ip netns exec ${PEER_NS}"
+
+# make sure we don't pause twice
+[ "${PAUSE}" = "yes" ] && PAUSE_ON_FAIL=no
+
+if [ "$(id -u)" -ne 0 ];then
+	echo "SKIP: Need root privileges"
+	exit $ksft_skip;
+fi
+
+if [ ! -x "$(command -v ip)" ]; then
+	echo "SKIP: Could not run test without ip tool"
+	exit $ksft_skip
+fi
+
+if [ ! -x "$(command -v nc)" ]; then
+	echo "SKIP: Could not run test without nc tool"
+	exit $ksft_skip
+fi
+
+# start clean
+cleanup &> /dev/null
+
+for t in $TESTS
+do
+	case $t in
+	gre_gso)		gre_gso_test;;
+
+	help) echo "Test names: $TESTS"; exit 0;;
+	esac
+done
+
+if [ "$TESTS" != "none" ]; then
+	printf "\nTests passed: %3d\n" ${nsuccess}
+	printf "Tests failed: %3d\n"   ${nfail}
+fi
+
+exit $ret
diff --git a/tools/testing/selftests/net/mptcp/simult_flows.sh b/tools/testing/selftests/net/mptcp/simult_flows.sh
index fd63ebfe9a2b..910d8126af8f 100755
--- a/tools/testing/selftests/net/mptcp/simult_flows.sh
+++ b/tools/testing/selftests/net/mptcp/simult_flows.sh
@@ -22,8 +22,8 @@ usage() {
 
 cleanup()
 {
-	rm -f "$cin" "$cout"
-	rm -f "$sin" "$sout"
+	rm -f "$cout" "$sout"
+	rm -f "$large" "$small"
 	rm -f "$capout"
 
 	local netns
diff --git a/tools/thermal/tmon/Makefile b/tools/thermal/tmon/Makefile
index 9db867df7679..f9c52b7fab7b 100644
--- a/tools/thermal/tmon/Makefile
+++ b/tools/thermal/tmon/Makefile
@@ -10,10 +10,9 @@ override CFLAGS+= $(call cc-option,-O3,-O1) ${WARNFLAGS}
 # Add "-fstack-protector" only if toolchain supports it.
 override CFLAGS+= $(call cc-option,-fstack-protector-strong)
 CC?= $(CROSS_COMPILE)gcc
-PKG_CONFIG?= pkg-config
+PKG_CONFIG?= $(CROSS_COMPILE)pkg-config
 
 override CFLAGS+=-D VERSION=\"$(VERSION)\"
-LDFLAGS+=
 TARGET=tmon
 
 INSTALL_PROGRAM=install -m 755 -p
@@ -33,7 +32,6 @@ override CFLAGS += $(shell $(PKG_CONFIG) --cflags $(STATIC) panelw ncursesw 2> /
 		     $(PKG_CONFIG) --cflags $(STATIC) panel ncurses 2> /dev/null)
 
 OBJS = tmon.o tui.o sysfs.o pid.o
-OBJS +=
 
 tmon: $(OBJS) Makefile tmon.h
 	$(CC) $(CFLAGS) $(LDFLAGS) $(OBJS)  -o $(TARGET) $(TMON_LIBS)
@@ -42,15 +40,13 @@ valgrind: tmon
 	 sudo valgrind -v --track-origins=yes --tool=memcheck --leak-check=yes --show-reachable=yes --num-callers=20 --track-fds=yes ./$(TARGET)  1> /dev/null
 
 install:
-	- mkdir -p $(INSTALL_ROOT)/$(BINDIR)
-	- $(INSTALL_PROGRAM) "$(TARGET)" "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)"
+	- $(INSTALL_PROGRAM) -D "$(TARGET)" "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)"
 
 uninstall:
 	$(DEL_FILE) "$(INSTALL_ROOT)/$(BINDIR)/$(TARGET)"
 
 clean:
-	find . -name "*.o" | xargs $(DEL_FILE)
-	rm -f $(TARGET)
+	rm -f $(TARGET) $(OBJS)
 
 dist:
 	git tag v$(VERSION)
diff --git a/virt/kvm/binary_stats.c b/virt/kvm/binary_stats.c
index e609d428811a..eefca6c69f51 100644
--- a/virt/kvm/binary_stats.c
+++ b/virt/kvm/binary_stats.c
@@ -136,9 +136,7 @@ ssize_t kvm_stats_read(char *id, const struct kvm_stats_header *header,
 		src = stats + pos - header->data_offset;
 		if (copy_to_user(dest, src, copylen))
 			return -EFAULT;
-		remain -= copylen;
 		pos += copylen;
-		dest += copylen;
 	}
 
 	*offset = pos;
diff --git a/virt/kvm/dirty_ring.c b/virt/kvm/dirty_ring.c
index 7aafefc50aa7..88f4683198ea 100644
--- a/virt/kvm/dirty_ring.c
+++ b/virt/kvm/dirty_ring.c
@@ -91,11 +91,6 @@ static inline void kvm_dirty_gfn_set_dirtied(struct kvm_dirty_gfn *gfn)
 	gfn->flags = KVM_DIRTY_GFN_F_DIRTY;
 }
 
-static inline bool kvm_dirty_gfn_invalid(struct kvm_dirty_gfn *gfn)
-{
-	return gfn->flags == 0;
-}
-
 static inline bool kvm_dirty_gfn_harvested(struct kvm_dirty_gfn *gfn)
 {
 	return gfn->flags & KVM_DIRTY_GFN_F_RESET;
diff --git a/virt/kvm/kvm_main.c b/virt/kvm/kvm_main.c
index b50dbe269f4b..439d3b4cd1a9 100644
--- a/virt/kvm/kvm_main.c
+++ b/virt/kvm/kvm_main.c
@@ -189,16 +189,6 @@ bool kvm_is_reserved_pfn(kvm_pfn_t pfn)
 	return true;
 }
 
-bool kvm_is_transparent_hugepage(kvm_pfn_t pfn)
-{
-	struct page *page = pfn_to_page(pfn);
-
-	if (!PageTransCompoundMap(page))
-		return false;
-
-	return is_transparent_hugepage(compound_head(page));
-}
-
 /*
  * Switches to specified vcpu, until a matching vcpu_put()
  */
@@ -318,6 +308,7 @@ void kvm_flush_remote_tlbs(struct kvm *kvm)
 	 */
 	long dirty_count = smp_load_acquire(&kvm->tlbs_dirty);
 
+	++kvm->stat.generic.remote_tlb_flush_requests;
 	/*
 	 * We want to publish modifications to the page tables before reading
 	 * mode. Pairs with a memory barrier in arch-specific code.
@@ -415,6 +406,7 @@ static void kvm_vcpu_init(struct kvm_vcpu *vcpu, struct kvm *kvm, unsigned id)
 	vcpu->preempted = false;
 	vcpu->ready = false;
 	preempt_notifier_init(&vcpu->preempt_notifier, &kvm_preempt_ops);
+	vcpu->last_used_slot = 0;
 }
 
 void kvm_vcpu_destroy(struct kvm_vcpu *vcpu)
@@ -496,17 +488,6 @@ static __always_inline int __kvm_handle_hva_range(struct kvm *kvm,
 
 	idx = srcu_read_lock(&kvm->srcu);
 
-	/* The on_lock() path does not yet support lock elision. */
-	if (!IS_KVM_NULL_FN(range->on_lock)) {
-		locked = true;
-		KVM_MMU_LOCK(kvm);
-
-		range->on_lock(kvm, range->start, range->end);
-
-		if (IS_KVM_NULL_FN(range->handler))
-			goto out_unlock;
-	}
-
 	for (i = 0; i < KVM_ADDRESS_SPACE_NUM; i++) {
 		slots = __kvm_memslots(kvm, i);
 		kvm_for_each_memslot(slot, slots) {
@@ -538,6 +519,10 @@ static __always_inline int __kvm_handle_hva_range(struct kvm *kvm,
 			if (!locked) {
 				locked = true;
 				KVM_MMU_LOCK(kvm);
+				if (!IS_KVM_NULL_FN(range->on_lock))
+					range->on_lock(kvm, range->start, range->end);
+				if (IS_KVM_NULL_FN(range->handler))
+					break;
 			}
 			ret |= range->handler(kvm, &gfn_range);
 		}
@@ -546,7 +531,6 @@ static __always_inline int __kvm_handle_hva_range(struct kvm *kvm,
 	if (range->flush_on_ret && (ret || kvm->tlbs_dirty))
 		kvm_flush_remote_tlbs(kvm);
 
-out_unlock:
 	if (locked)
 		KVM_MMU_UNLOCK(kvm);
 
@@ -604,16 +588,20 @@ static void kvm_mmu_notifier_change_pte(struct mmu_notifier *mn,
 	trace_kvm_set_spte_hva(address);
 
 	/*
-	 * .change_pte() must be surrounded by .invalidate_range_{start,end}(),
-	 * and so always runs with an elevated notifier count.  This obviates
-	 * the need to bump the sequence count.
+	 * .change_pte() must be surrounded by .invalidate_range_{start,end}().
+	 * If mmu_notifier_count is zero, then no in-progress invalidations,
+	 * including this one, found a relevant memslot at start(); rechecking
+	 * memslots here is unnecessary.  Note, a false positive (count elevated
+	 * by a different invalidation) is sub-optimal but functionally ok.
 	 */
-	WARN_ON_ONCE(!kvm->mmu_notifier_count);
+	WARN_ON_ONCE(!READ_ONCE(kvm->mn_active_invalidate_count));
+	if (!READ_ONCE(kvm->mmu_notifier_count))
+		return;
 
 	kvm_handle_hva_range(mn, address, address + 1, pte, kvm_set_spte_gfn);
 }
 
-static void kvm_inc_notifier_count(struct kvm *kvm, unsigned long start,
+void kvm_inc_notifier_count(struct kvm *kvm, unsigned long start,
 				   unsigned long end)
 {
 	/*
@@ -658,12 +646,24 @@ static int kvm_mmu_notifier_invalidate_range_start(struct mmu_notifier *mn,
 
 	trace_kvm_unmap_hva_range(range->start, range->end);
 
+	/*
+	 * Prevent memslot modification between range_start() and range_end()
+	 * so that conditionally locking provides the same result in both
+	 * functions.  Without that guarantee, the mmu_notifier_count
+	 * adjustments will be imbalanced.
+	 *
+	 * Pairs with the decrement in range_end().
+	 */
+	spin_lock(&kvm->mn_invalidate_lock);
+	kvm->mn_active_invalidate_count++;
+	spin_unlock(&kvm->mn_invalidate_lock);
+
 	__kvm_handle_hva_range(kvm, &hva_range);
 
 	return 0;
 }
 
-static void kvm_dec_notifier_count(struct kvm *kvm, unsigned long start,
+void kvm_dec_notifier_count(struct kvm *kvm, unsigned long start,
 				   unsigned long end)
 {
 	/*
@@ -694,9 +694,22 @@ static void kvm_mmu_notifier_invalidate_range_end(struct mmu_notifier *mn,
 		.flush_on_ret	= false,
 		.may_block	= mmu_notifier_range_blockable(range),
 	};
+	bool wake;
 
 	__kvm_handle_hva_range(kvm, &hva_range);
 
+	/* Pairs with the increment in range_start(). */
+	spin_lock(&kvm->mn_invalidate_lock);
+	wake = (--kvm->mn_active_invalidate_count == 0);
+	spin_unlock(&kvm->mn_invalidate_lock);
+
+	/*
+	 * There can only be one waiter, since the wait happens under
+	 * slots_lock.
+	 */
+	if (wake)
+		rcuwait_wake_up(&kvm->mn_memslots_update_rcuwait);
+
 	BUG_ON(kvm->mmu_notifier_count < 0);
 }
 
@@ -897,7 +910,7 @@ static int kvm_create_vm_debugfs(struct kvm *kvm, int fd)
 	char dir_name[ITOA_MAX_LEN * 2];
 	struct kvm_stat_data *stat_data;
 	const struct _kvm_stats_desc *pdesc;
-	int i;
+	int i, ret;
 	int kvm_debugfs_num_entries = kvm_vm_stats_header.num_desc +
 				      kvm_vcpu_stats_header.num_desc;
 
@@ -954,6 +967,13 @@ static int kvm_create_vm_debugfs(struct kvm *kvm, int fd)
 				    kvm->debugfs_dentry, stat_data,
 				    &stat_fops_per_vm);
 	}
+
+	ret = kvm_arch_create_vm_debugfs(kvm);
+	if (ret) {
+		kvm_destroy_vm_debugfs(kvm);
+		return i;
+	}
+
 	return 0;
 }
 
@@ -974,6 +994,17 @@ void __weak kvm_arch_pre_destroy_vm(struct kvm *kvm)
 {
 }
 
+/*
+ * Called after per-vm debugfs created.  When called kvm->debugfs_dentry should
+ * be setup already, so we can create arch-specific debugfs entries under it.
+ * Cleanup should be automatic done in kvm_destroy_vm_debugfs() recursively, so
+ * a per-arch destroy interface is not needed.
+ */
+int __weak kvm_arch_create_vm_debugfs(struct kvm *kvm)
+{
+	return 0;
+}
+
 static struct kvm *kvm_create_vm(unsigned long type)
 {
 	struct kvm *kvm = kvm_arch_alloc_vm();
@@ -991,6 +1022,9 @@ static struct kvm *kvm_create_vm(unsigned long type)
 	mutex_init(&kvm->irq_lock);
 	mutex_init(&kvm->slots_lock);
 	mutex_init(&kvm->slots_arch_lock);
+	spin_lock_init(&kvm->mn_invalidate_lock);
+	rcuwait_init(&kvm->mn_memslots_update_rcuwait);
+
 	INIT_LIST_HEAD(&kvm->devices);
 
 	BUILD_BUG_ON(KVM_MEM_SLOTS_NUM > SHRT_MAX);
@@ -1113,6 +1147,16 @@ static void kvm_destroy_vm(struct kvm *kvm)
 	kvm_coalesced_mmio_free(kvm);
 #if defined(CONFIG_MMU_NOTIFIER) && defined(KVM_ARCH_WANT_MMU_NOTIFIER)
 	mmu_notifier_unregister(&kvm->mmu_notifier, kvm->mm);
+	/*
+	 * At this point, pending calls to invalidate_range_start()
+	 * have completed but no more MMU notifiers will run, so
+	 * mn_active_invalidate_count may remain unbalanced.
+	 * No threads can be waiting in install_new_memslots as the
+	 * last reference on KVM has been dropped, but freeing
+	 * memslots would deadlock without this manual intervention.
+	 */
+	WARN_ON(rcuwait_active(&kvm->mn_memslots_update_rcuwait));
+	kvm->mn_active_invalidate_count = 0;
 #else
 	kvm_arch_flush_shadow_all(kvm);
 #endif
@@ -1134,6 +1178,16 @@ void kvm_get_kvm(struct kvm *kvm)
 }
 EXPORT_SYMBOL_GPL(kvm_get_kvm);
 
+/*
+ * Make sure the vm is not during destruction, which is a safe version of
+ * kvm_get_kvm().  Return true if kvm referenced successfully, false otherwise.
+ */
+bool kvm_get_kvm_safe(struct kvm *kvm)
+{
+	return refcount_inc_not_zero(&kvm->users_count);
+}
+EXPORT_SYMBOL_GPL(kvm_get_kvm_safe);
+
 void kvm_put_kvm(struct kvm *kvm)
 {
 	if (refcount_dec_and_test(&kvm->users_count))
@@ -1194,8 +1248,8 @@ static inline void kvm_memslot_delete(struct kvm_memslots *slots,
 
 	slots->used_slots--;
 
-	if (atomic_read(&slots->lru_slot) >= slots->used_slots)
-		atomic_set(&slots->lru_slot, 0);
+	if (atomic_read(&slots->last_used_slot) >= slots->used_slots)
+		atomic_set(&slots->last_used_slot, 0);
 
 	for (i = slots->id_to_index[memslot->id]; i < slots->used_slots; i++) {
 		mslots[i] = mslots[i + 1];
@@ -1364,7 +1418,22 @@ static struct kvm_memslots *install_new_memslots(struct kvm *kvm,
 	WARN_ON(gen & KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS);
 	slots->generation = gen | KVM_MEMSLOT_GEN_UPDATE_IN_PROGRESS;
 
+	/*
+	 * Do not store the new memslots while there are invalidations in
+	 * progress, otherwise the locking in invalidate_range_start and
+	 * invalidate_range_end will be unbalanced.
+	 */
+	spin_lock(&kvm->mn_invalidate_lock);
+	prepare_to_rcuwait(&kvm->mn_memslots_update_rcuwait);
+	while (kvm->mn_active_invalidate_count) {
+		set_current_state(TASK_UNINTERRUPTIBLE);
+		spin_unlock(&kvm->mn_invalidate_lock);
+		schedule();
+		spin_lock(&kvm->mn_invalidate_lock);
+	}
+	finish_rcuwait(&kvm->mn_memslots_update_rcuwait);
 	rcu_assign_pointer(kvm->memslots[as_id], slots);
+	spin_unlock(&kvm->mn_invalidate_lock);
 
 	/*
 	 * Acquired in kvm_set_memslot. Must be released before synchronize
@@ -1980,7 +2049,26 @@ EXPORT_SYMBOL_GPL(gfn_to_memslot);
 
 struct kvm_memory_slot *kvm_vcpu_gfn_to_memslot(struct kvm_vcpu *vcpu, gfn_t gfn)
 {
-	return __gfn_to_memslot(kvm_vcpu_memslots(vcpu), gfn);
+	struct kvm_memslots *slots = kvm_vcpu_memslots(vcpu);
+	struct kvm_memory_slot *slot;
+	int slot_index;
+
+	slot = try_get_memslot(slots, vcpu->last_used_slot, gfn);
+	if (slot)
+		return slot;
+
+	/*
+	 * Fall back to searching all memslots. We purposely use
+	 * search_memslots() instead of __gfn_to_memslot() to avoid
+	 * thrashing the VM-wide last_used_index in kvm_memslots.
+	 */
+	slot = search_memslots(slots, gfn, &slot_index);
+	if (slot) {
+		vcpu->last_used_slot = slot_index;
+		return slot;
+	}
+
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(kvm_vcpu_gfn_to_memslot);
 
@@ -2239,7 +2327,7 @@ static int hva_to_pfn_remapped(struct vm_area_struct *vma,
 	 * Get a reference here because callers of *hva_to_pfn* and
 	 * *gfn_to_pfn* ultimately call kvm_release_pfn_clean on the
 	 * returned pfn.  This is only needed if the VMA has VM_MIXEDMAP
-	 * set, but the kvm_get_pfn/kvm_release_pfn_clean pair will
+	 * set, but the kvm_try_get_pfn/kvm_release_pfn_clean pair will
 	 * simply do nothing for reserved pfns.
 	 *
 	 * Whoever called remap_pfn_range is also going to call e.g.
@@ -2636,13 +2724,6 @@ void kvm_set_pfn_accessed(kvm_pfn_t pfn)
 }
 EXPORT_SYMBOL_GPL(kvm_set_pfn_accessed);
 
-void kvm_get_pfn(kvm_pfn_t pfn)
-{
-	if (!kvm_is_reserved_pfn(pfn))
-		get_page(pfn_to_page(pfn));
-}
-EXPORT_SYMBOL_GPL(kvm_get_pfn);
-
 static int next_segment(unsigned long len, int offset)
 {
 	if (len > PAGE_SIZE - offset)
@@ -3122,13 +3203,23 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 				++vcpu->stat.generic.halt_successful_poll;
 				if (!vcpu_valid_wakeup(vcpu))
 					++vcpu->stat.generic.halt_poll_invalid;
+
+				KVM_STATS_LOG_HIST_UPDATE(
+				      vcpu->stat.generic.halt_poll_success_hist,
+				      ktime_to_ns(ktime_get()) -
+				      ktime_to_ns(start));
 				goto out;
 			}
 			cpu_relax();
 			poll_end = cur = ktime_get();
 		} while (kvm_vcpu_can_poll(cur, stop));
+
+		KVM_STATS_LOG_HIST_UPDATE(
+				vcpu->stat.generic.halt_poll_fail_hist,
+				ktime_to_ns(ktime_get()) - ktime_to_ns(start));
 	}
 
+
 	prepare_to_rcuwait(&vcpu->wait);
 	for (;;) {
 		set_current_state(TASK_INTERRUPTIBLE);
@@ -3141,6 +3232,12 @@ void kvm_vcpu_block(struct kvm_vcpu *vcpu)
 	}
 	finish_rcuwait(&vcpu->wait);
 	cur = ktime_get();
+	if (waited) {
+		vcpu->stat.generic.halt_wait_ns +=
+			ktime_to_ns(cur) - ktime_to_ns(poll_end);
+		KVM_STATS_LOG_HIST_UPDATE(vcpu->stat.generic.halt_wait_hist,
+				ktime_to_ns(cur) - ktime_to_ns(poll_end));
+	}
 out:
 	kvm_arch_vcpu_unblocking(vcpu);
 	block_ns = ktime_to_ns(cur) - ktime_to_ns(start);
@@ -3612,7 +3709,7 @@ static long kvm_vcpu_ioctl(struct file *filp,
 	struct kvm_fpu *fpu = NULL;
 	struct kvm_sregs *kvm_sregs = NULL;
 
-	if (vcpu->kvm->mm != current->mm)
+	if (vcpu->kvm->mm != current->mm || vcpu->kvm->vm_bugged)
 		return -EIO;
 
 	if (unlikely(_IOC_TYPE(ioctl) != KVMIO))
@@ -3822,7 +3919,7 @@ static long kvm_vcpu_compat_ioctl(struct file *filp,
 	void __user *argp = compat_ptr(arg);
 	int r;
 
-	if (vcpu->kvm->mm != current->mm)
+	if (vcpu->kvm->mm != current->mm || vcpu->kvm->vm_bugged)
 		return -EIO;
 
 	switch (ioctl) {
@@ -3888,7 +3985,7 @@ static long kvm_device_ioctl(struct file *filp, unsigned int ioctl,
 {
 	struct kvm_device *dev = filp->private_data;
 
-	if (dev->kvm->mm != current->mm)
+	if (dev->kvm->mm != current->mm || dev->kvm->vm_bugged)
 		return -EIO;
 
 	switch (ioctl) {
@@ -4210,7 +4307,7 @@ static long kvm_vm_ioctl(struct file *filp,
 	void __user *argp = (void __user *)arg;
 	int r;
 
-	if (kvm->mm != current->mm)
+	if (kvm->mm != current->mm || kvm->vm_bugged)
 		return -EIO;
 	switch (ioctl) {
 	case KVM_CREATE_VCPU:
@@ -4421,7 +4518,7 @@ static long kvm_vm_compat_ioctl(struct file *filp,
 	struct kvm *kvm = filp->private_data;
 	int r;
 
-	if (kvm->mm != current->mm)
+	if (kvm->mm != current->mm || kvm->vm_bugged)
 		return -EIO;
 	switch (ioctl) {
 #ifdef CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT
@@ -4983,12 +5080,12 @@ static int kvm_debugfs_open(struct inode *inode, struct file *file,
 	struct kvm_stat_data *stat_data = (struct kvm_stat_data *)
 					  inode->i_private;
 
-	/* The debugfs files are a reference to the kvm struct which
-	 * is still valid when kvm_destroy_vm is called.
-	 * To avoid the race between open and the removal of the debugfs
-	 * directory we test against the users count.
+	/*
+	 * The debugfs files are a reference to the kvm struct which
+        * is still valid when kvm_destroy_vm is called.  kvm_get_kvm_safe
+        * avoids the race between open and the removal of the debugfs directory.
 	 */
-	if (!refcount_inc_not_zero(&stat_data->kvm->users_count))
+	if (!kvm_get_kvm_safe(stat_data->kvm))
 		return -ENOENT;
 
 	if (simple_attr_open(inode, file, get,