summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/parport/Kconfig5
-rw-r--r--drivers/parport/parport_arc.c139
2 files changed, 0 insertions, 144 deletions
diff --git a/drivers/parport/Kconfig b/drivers/parport/Kconfig
index 6c8452ede0e1..4d8dc27ea9d1 100644
--- a/drivers/parport/Kconfig
+++ b/drivers/parport/Kconfig
@@ -85,11 +85,6 @@ config PARPORT_PC_PCMCIA
config PARPORT_NOT_PC
bool
-config PARPORT_ARC
- tristate "Archimedes hardware"
- depends on ARM && PARPORT
- select PARPORT_NOT_PC
-
config PARPORT_IP32
tristate "SGI IP32 builtin port (EXPERIMENTAL)"
depends on SGI_IP32 && PARPORT && EXPERIMENTAL
diff --git a/drivers/parport/parport_arc.c b/drivers/parport/parport_arc.c
deleted file mode 100644
index b35bb4f48d62..000000000000
--- a/drivers/parport/parport_arc.c
+++ /dev/null
@@ -1,139 +0,0 @@
-/* Low-level parallel port routines for Archimedes onboard hardware
- *
- * Author: Phil Blundell <philb@gnu.org>
- */
-
-/* This driver is for the parallel port hardware found on Acorn's old
- * range of Archimedes machines. The A5000 and newer systems have PC-style
- * I/O hardware and should use the parport_pc driver instead.
- *
- * The Acorn printer port hardware is very simple. There is a single 8-bit
- * write-only latch for the data port and control/status bits are handled
- * with various auxilliary input and output lines. The port is not
- * bidirectional, does not support any modes other than SPP, and has only
- * a subset of the standard printer control lines connected.
- */
-
-#include <linux/threads.h>
-#include <linux/delay.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/parport.h>
-
-#include <asm/ptrace.h>
-#include <asm/io.h>
-#include <asm/arch/oldlatches.h>
-#include <asm/arch/irqs.h>
-
-#define DATA_ADDRESS 0x3350010
-
-/* This is equivalent to the above and only used for request_region. */
-#define PORT_BASE 0x80000000 | ((DATA_ADDRESS - IO_BASE) >> 2)
-
-/* The hardware can't read from the data latch, so we must use a soft
- copy. */
-static unsigned char data_copy;
-
-/* These are pretty simple. We know the irq is never shared and the
- kernel does all the magic that's required. */
-static void arc_enable_irq(struct parport *p)
-{
- enable_irq(p->irq);
-}
-
-static void arc_disable_irq(struct parport *p)
-{
- disable_irq(p->irq);
-}
-
-static void arc_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-{
- parport_generic_irq(irq, (struct parport *) dev_id, regs);
-}
-
-static void arc_write_data(struct parport *p, unsigned char data)
-{
- data_copy = data;
- outb_t(data, DATA_LATCH);
-}
-
-static unsigned char arc_read_data(struct parport *p)
-{
- return data_copy;
-}
-
-static struct parport_operations parport_arc_ops =
-{
- .write_data = arc_write_data,
- .read_data = arc_read_data,
-
- .write_control = arc_write_control,
- .read_control = arc_read_control,
- .frob_control = arc_frob_control,
-
- .read_status = arc_read_status,
-
- .enable_irq = arc_enable_irq,
- .disable_irq = arc_disable_irq,
-
- .data_forward = arc_data_forward,
- .data_reverse = arc_data_reverse,
-
- .init_state = arc_init_state,
- .save_state = arc_save_state,
- .restore_state = arc_restore_state,
-
- .epp_write_data = parport_ieee1284_epp_write_data,
- .epp_read_data = parport_ieee1284_epp_read_data,
- .epp_write_addr = parport_ieee1284_epp_write_addr,
- .epp_read_addr = parport_ieee1284_epp_read_addr,
-
- .ecp_write_data = parport_ieee1284_ecp_write_data,
- .ecp_read_data = parport_ieee1284_ecp_read_data,
- .ecp_write_addr = parport_ieee1284_ecp_write_addr,
-
- .compat_write_data = parport_ieee1284_write_compat,
- .nibble_read_data = parport_ieee1284_read_nibble,
- .byte_read_data = parport_ieee1284_read_byte,
-
- .owner = THIS_MODULE,
-};
-
-/* --- Initialisation code -------------------------------- */
-
-static int parport_arc_init(void)
-{
- /* Archimedes hardware provides only one port, at a fixed address */
- struct parport *p;
- struct resource res;
- char *fake_name = "parport probe");
-
- res = request_region(PORT_BASE, 1, fake_name);
- if (res == NULL)
- return 0;
-
- p = parport_register_port (PORT_BASE, IRQ_PRINTERACK,
- PARPORT_DMA_NONE, &parport_arc_ops);
-
- if (!p) {
- release_region(PORT_BASE, 1);
- return 0;
- }
-
- p->modes = PARPORT_MODE_ARCSPP;
- p->size = 1;
- rename_region(res, p->name);
-
- printk(KERN_INFO "%s: Archimedes on-board port, using irq %d\n",
- p->irq);
-
- /* Tell the high-level drivers about the port. */
- parport_announce_port (p);
-
- return 1;
-}
-
-module_init(parport_arc_init)