summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-class-mei13
-rw-r--r--Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu36
-rw-r--r--Documentation/admin-guide/dynamic-debug-howto.rst29
-rw-r--r--Documentation/devicetree/bindings/arm/coresight.txt13
-rw-r--r--Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt16
-rw-r--r--Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml19
-rw-r--r--Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml96
-rw-r--r--Documentation/devicetree/bindings/nvmem/qfprom.txt35
-rw-r--r--Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml79
-rw-r--r--Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt10
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml55
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml73
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml2
-rw-r--r--Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml1
-rw-r--r--Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml1
-rw-r--r--Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml1
-rw-r--r--Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml75
-rw-r--r--Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml8
-rw-r--r--Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml105
-rw-r--r--Documentation/driver-api/firmware/built-in-fw.rst2
-rw-r--r--Documentation/driver-api/firmware/direct-fs-lookup.rst2
-rw-r--r--Documentation/driver-api/firmware/firmware_cache.rst2
-rw-r--r--Documentation/driver-api/firmware/request_firmware.rst2
-rw-r--r--Documentation/driver-api/soundwire/stream.rst11
-rw-r--r--Documentation/driver-api/uio-howto.rst2
-rw-r--r--Documentation/driver-api/xillybus.rst2
-rw-r--r--Documentation/fpga/dfl.rst19
-rw-r--r--MAINTAINERS17
-rw-r--r--drivers/android/binder.c23
-rw-r--r--drivers/android/binder_alloc.c1
-rw-r--r--drivers/android/binderfs.c3
-rw-r--r--drivers/bus/fsl-mc/dprc-driver.c57
-rw-r--r--drivers/bus/fsl-mc/fsl-mc-bus.c30
-rw-r--r--drivers/bus/fsl-mc/mc-io.c2
-rw-r--r--drivers/bus/fsl-mc/mc-sys.c4
-rw-r--r--drivers/char/Kconfig6
-rw-r--r--drivers/char/mwave/smapi.c4
-rw-r--r--drivers/char/raw.c8
-rw-r--r--drivers/char/ttyprintk.c2
-rw-r--r--drivers/char/virtio_console.c8
-rw-r--r--drivers/firmware/stratix10-rsu.c170
-rw-r--r--drivers/firmware/stratix10-svc.c17
-rw-r--r--drivers/fpga/dfl-afu-dma-region.c19
-rw-r--r--drivers/fpga/dfl-afu-error.c17
-rw-r--r--drivers/fpga/dfl-afu-main.c32
-rw-r--r--drivers/fpga/dfl-fme-error.c18
-rw-r--r--drivers/fpga/dfl-fme-main.c6
-rw-r--r--drivers/fpga/dfl-pci.c78
-rw-r--r--drivers/fpga/dfl.c313
-rw-r--r--drivers/fpga/dfl.h63
-rw-r--r--drivers/fpga/fpga-bridge.c6
-rw-r--r--drivers/fpga/fpga-mgr.c4
-rw-r--r--drivers/fpga/xilinx-spi.c61
-rw-r--r--drivers/greybus/es2.c2
-rw-r--r--drivers/greybus/interface.c2
-rw-r--r--drivers/hwtracing/coresight/coresight-catu.c5
-rw-r--r--drivers/hwtracing/coresight/coresight-etm-perf.c17
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x.c49
-rw-r--r--drivers/hwtracing/coresight/coresight-etm4x.h9
-rw-r--r--drivers/hwtracing/coresight/coresight-platform.c5
-rw-r--r--drivers/hwtracing/coresight/coresight-priv.h2
-rw-r--r--drivers/hwtracing/coresight/coresight-replicator.c68
-rw-r--r--drivers/hwtracing/coresight/coresight-stm.c2
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etf.c13
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc-etr.c2
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.c26
-rw-r--r--drivers/hwtracing/coresight/coresight-tmc.h1
-rw-r--r--drivers/hwtracing/coresight/coresight.c166
-rw-r--r--drivers/interconnect/core.c16
-rw-r--r--drivers/misc/Kconfig2
-rw-r--r--drivers/misc/c2port/core.c2
-rw-r--r--drivers/misc/cardreader/Makefile2
-rw-r--r--drivers/misc/cardreader/rtl8411.c8
-rw-r--r--drivers/misc/cardreader/rts5209.c5
-rw-r--r--drivers/misc/cardreader/rts5227.c5
-rw-r--r--drivers/misc/cardreader/rts5228.c747
-rw-r--r--drivers/misc/cardreader/rts5228.h168
-rw-r--r--drivers/misc/cardreader/rts5229.c5
-rw-r--r--drivers/misc/cardreader/rts5249.c28
-rw-r--r--drivers/misc/cardreader/rts5260.c23
-rw-r--r--drivers/misc/cardreader/rts5261.c32
-rw-r--r--drivers/misc/cardreader/rtsx_pcr.c129
-rw-r--r--drivers/misc/cardreader/rtsx_pcr.h5
-rw-r--r--drivers/misc/cardreader/rtsx_usb.c2
-rw-r--r--drivers/misc/cb710/core.c28
-rw-r--r--drivers/misc/cb710/sgbuf2.c1
-rw-r--r--drivers/misc/cxl/flash.c4
-rw-r--r--drivers/misc/cxl/hcalls.c42
-rw-r--r--drivers/misc/cxl/sysfs.c2
-rw-r--r--drivers/misc/cxl/vphb.c4
-rw-r--r--drivers/misc/echo/echo.c6
-rw-r--r--drivers/misc/eeprom/at24.c2
-rw-r--r--drivers/misc/eeprom/eeprom_93cx6.c4
-rw-r--r--drivers/misc/enclosure.c8
-rw-r--r--drivers/misc/genwqe/card_base.c32
-rw-r--r--drivers/misc/genwqe/card_ddcb.c20
-rw-r--r--drivers/misc/genwqe/card_debugfs.c2
-rw-r--r--drivers/misc/genwqe/card_dev.c24
-rw-r--r--drivers/misc/genwqe/card_sysfs.c8
-rw-r--r--drivers/misc/genwqe/card_utils.c30
-rw-r--r--drivers/misc/habanalabs/Makefile11
-rw-r--r--drivers/misc/habanalabs/common/Makefile7
-rw-r--r--drivers/misc/habanalabs/common/asid.c (renamed from drivers/misc/habanalabs/asid.c)0
-rw-r--r--drivers/misc/habanalabs/common/command_buffer.c (renamed from drivers/misc/habanalabs/command_buffer.c)82
-rw-r--r--drivers/misc/habanalabs/common/command_submission.c (renamed from drivers/misc/habanalabs/command_submission.c)92
-rw-r--r--drivers/misc/habanalabs/common/context.c (renamed from drivers/misc/habanalabs/context.c)39
-rw-r--r--drivers/misc/habanalabs/common/debugfs.c (renamed from drivers/misc/habanalabs/debugfs.c)2
-rw-r--r--drivers/misc/habanalabs/common/device.c (renamed from drivers/misc/habanalabs/device.c)88
-rw-r--r--drivers/misc/habanalabs/common/firmware_if.c (renamed from drivers/misc/habanalabs/firmware_if.c)104
-rw-r--r--drivers/misc/habanalabs/common/habanalabs.h (renamed from drivers/misc/habanalabs/habanalabs.h)172
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_drv.c (renamed from drivers/misc/habanalabs/habanalabs_drv.c)1
-rw-r--r--drivers/misc/habanalabs/common/habanalabs_ioctl.c (renamed from drivers/misc/habanalabs/habanalabs_ioctl.c)24
-rw-r--r--drivers/misc/habanalabs/common/hw_queue.c (renamed from drivers/misc/habanalabs/hw_queue.c)165
-rw-r--r--drivers/misc/habanalabs/common/hwmon.c (renamed from drivers/misc/habanalabs/hwmon.c)0
-rw-r--r--drivers/misc/habanalabs/common/irq.c (renamed from drivers/misc/habanalabs/irq.c)38
-rw-r--r--drivers/misc/habanalabs/common/memory.c (renamed from drivers/misc/habanalabs/memory.c)5
-rw-r--r--drivers/misc/habanalabs/common/mmu.c (renamed from drivers/misc/habanalabs/mmu.c)3
-rw-r--r--drivers/misc/habanalabs/common/pci.c (renamed from drivers/misc/habanalabs/pci.c)151
-rw-r--r--drivers/misc/habanalabs/common/sysfs.c (renamed from drivers/misc/habanalabs/sysfs.c)3
-rw-r--r--drivers/misc/habanalabs/gaudi/Makefile2
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi.c909
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudiP.h24
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi_coresight.c12
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c2
-rw-r--r--drivers/misc/habanalabs/gaudi/gaudi_security.c5
-rw-r--r--drivers/misc/habanalabs/goya/Makefile2
-rw-r--r--drivers/misc/habanalabs/goya/goya.c196
-rw-r--r--drivers/misc/habanalabs/goya/goyaP.h24
-rw-r--r--drivers/misc/habanalabs/goya/goya_coresight.c15
-rw-r--r--drivers/misc/habanalabs/goya/goya_security.c2
-rw-r--r--drivers/misc/habanalabs/include/common/armcp_if.h (renamed from drivers/misc/habanalabs/include/armcp_if.h)14
-rw-r--r--drivers/misc/habanalabs/include/common/hl_boot_if.h (renamed from drivers/misc/habanalabs/include/hl_boot_if.h)14
-rw-r--r--drivers/misc/habanalabs/include/common/qman_if.h (renamed from drivers/misc/habanalabs/include/qman_if.h)0
-rw-r--r--drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h21
-rw-r--r--drivers/misc/habanalabs/include/gaudi/asic_reg/psoc_cpu_pll_regs.h114
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_masks.h3
-rw-r--r--drivers/misc/habanalabs/include/gaudi/gaudi_packets.h4
-rw-r--r--drivers/misc/hpilo.c11
-rw-r--r--drivers/misc/hpilo.h22
-rw-r--r--drivers/misc/ibmasm/command.c6
-rw-r--r--drivers/misc/ibmasm/dot_command.c6
-rw-r--r--drivers/misc/ibmasm/event.c4
-rw-r--r--drivers/misc/ibmasm/r_heartbeat.c2
-rw-r--r--drivers/misc/ibmvmc.c6
-rw-r--r--drivers/misc/lattice-ecp3-config.c19
-rw-r--r--drivers/misc/lkdtm/bugs.c53
-rw-r--r--drivers/misc/lkdtm/heap.c9
-rw-r--r--drivers/misc/lkdtm/lkdtm.h2
-rw-r--r--drivers/misc/lkdtm/perms.c22
-rw-r--r--drivers/misc/lkdtm/usercopy.c7
-rw-r--r--drivers/misc/mei/Kconfig2
-rw-r--r--drivers/misc/mei/bus-fixup.c23
-rw-r--r--drivers/misc/mei/bus.c2
-rw-r--r--drivers/misc/mei/client.c8
-rw-r--r--drivers/misc/mei/hbm.c74
-rw-r--r--drivers/misc/mei/hdcp/mei_hdcp.c4
-rw-r--r--drivers/misc/mei/hdcp/mei_hdcp.h2
-rw-r--r--drivers/misc/mei/hw-me-regs.h4
-rw-r--r--drivers/misc/mei/hw-me.c66
-rw-r--r--drivers/misc/mei/hw-me.h9
-rw-r--r--drivers/misc/mei/hw-txe.c5
-rw-r--r--drivers/misc/mei/hw.h8
-rw-r--r--drivers/misc/mei/main.c31
-rw-r--r--drivers/misc/mei/mei_dev.h4
-rw-r--r--drivers/misc/mei/pci-me.c10
-rw-r--r--drivers/misc/mic/card/mic_debugfs.c10
-rw-r--r--drivers/misc/mic/cosm/cosm_debugfs.c4
-rw-r--r--drivers/misc/mic/cosm/cosm_main.c1
-rw-r--r--drivers/misc/mic/host/mic_debugfs.c8
-rw-r--r--drivers/misc/mic/host/mic_intr.c4
-rw-r--r--drivers/misc/mic/host/mic_main.c1
-rw-r--r--drivers/misc/mic/host/mic_x100.c13
-rw-r--r--drivers/misc/mic/host/mic_x100.h9
-rw-r--r--drivers/misc/mic/scif/scif_api.c6
-rw-r--r--drivers/misc/mic/scif/scif_dma.c3
-rw-r--r--drivers/misc/mic/scif/scif_epd.c9
-rw-r--r--drivers/misc/mic/scif/scif_fence.c34
-rw-r--r--drivers/misc/mic/scif/scif_nm.c17
-rw-r--r--drivers/misc/mic/scif/scif_nodeqp.c18
-rw-r--r--drivers/misc/mic/scif/scif_ports.c9
-rw-r--r--drivers/misc/mic/scif/scif_rma.c12
-rw-r--r--drivers/misc/mic/vop/vop_main.c9
-rw-r--r--drivers/misc/ocxl/config.c18
-rw-r--r--drivers/misc/pch_phub.c57
-rw-r--r--drivers/misc/phantom.c20
-rw-r--r--drivers/misc/pti.c16
-rw-r--r--drivers/misc/sgi-xp/xp_main.c4
-rw-r--r--drivers/misc/sram-exec.c2
-rw-r--r--drivers/misc/ti-st/st_core.c79
-rw-r--r--drivers/misc/ti-st/st_kim.c71
-rw-r--r--drivers/misc/tifm_7xx1.c30
-rw-r--r--drivers/misc/uacce/uacce.c9
-rw-r--r--drivers/mmc/host/rtsx_pci_sdmmc.c2
-rw-r--r--drivers/mux/adgs1408.c6
-rw-r--r--drivers/nvmem/Kconfig3
-rw-r--r--drivers/nvmem/core.c43
-rw-r--r--drivers/nvmem/qcom-spmi-sdam.c4
-rw-r--r--drivers/nvmem/qfprom.c315
-rw-r--r--drivers/nvmem/sc27xx-efuse.c27
-rw-r--r--drivers/nvmem/sprd-efuse.c4
-rw-r--r--drivers/phy/Kconfig1
-rw-r--r--drivers/phy/Makefile17
-rw-r--r--drivers/phy/allwinner/Kconfig2
-rw-r--r--drivers/phy/allwinner/phy-sun4i-usb.c3
-rw-r--r--drivers/phy/allwinner/phy-sun6i-mipi-dphy.c4
-rw-r--r--drivers/phy/broadcom/Kconfig8
-rw-r--r--drivers/phy/broadcom/Makefile1
-rw-r--r--drivers/phy/broadcom/phy-bcm63xx-usbh.c457
-rw-r--r--drivers/phy/cadence/phy-cadence-salvo.c2
-rw-r--r--drivers/phy/marvell/phy-armada38x-comphy.c45
-rw-r--r--drivers/phy/marvell/phy-mvebu-a3700-utmi.c2
-rw-r--r--drivers/phy/motorola/phy-mapphone-mdm6600.c3
-rw-r--r--drivers/phy/phy-core.c5
-rw-r--r--drivers/phy/phy-xgene.c2
-rw-r--r--drivers/phy/qualcomm/Kconfig34
-rw-r--r--drivers/phy/qualcomm/Makefile4
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c571
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.c510
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qmp.h7
-rw-r--r--drivers/phy/qualcomm/phy-qcom-qusb2.c3
-rw-r--r--drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c85
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-i.h131
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c172
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h168
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c226
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h226
-rw-r--r--drivers/phy/qualcomm/phy-qcom-ufs.c648
-rw-r--r--drivers/phy/renesas/phy-rcar-gen3-usb2.c63
-rw-r--r--drivers/phy/rockchip/phy-rockchip-typec.c2
-rw-r--r--drivers/phy/samsung/Kconfig17
-rw-r--r--drivers/phy/samsung/Makefile1
-rw-r--r--drivers/phy/samsung/phy-exynos-dp-video.c4
-rw-r--r--drivers/phy/samsung/phy-exynos-mipi-video.c4
-rw-r--r--drivers/phy/samsung/phy-exynos-pcie.c2
-rw-r--r--drivers/phy/samsung/phy-exynos5-usbdrd.c16
-rw-r--r--drivers/phy/samsung/phy-exynos7-ufs.h81
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.c366
-rw-r--r--drivers/phy/samsung/phy-samsung-ufs.h139
-rw-r--r--drivers/phy/samsung/phy-samsung-usb2.c2
-rw-r--r--drivers/phy/st/phy-stm32-usbphyc.c4
-rw-r--r--drivers/phy/ti/phy-dm816x-usb.c11
-rw-r--r--drivers/phy/ti/phy-ti-pipe3.c5
-rw-r--r--drivers/phy/xilinx/Kconfig13
-rw-r--r--drivers/phy/xilinx/Makefile3
-rw-r--r--drivers/phy/xilinx/phy-zynqmp.c993
-rw-r--r--drivers/soundwire/Makefile10
-rw-r--r--drivers/soundwire/bus.c130
-rw-r--r--drivers/soundwire/bus_type.c19
-rw-r--r--drivers/soundwire/cadence_master.c70
-rw-r--r--drivers/soundwire/cadence_master.h4
-rw-r--r--drivers/soundwire/intel.c549
-rw-r--r--drivers/soundwire/intel.h22
-rw-r--r--drivers/soundwire/intel_init.c356
-rw-r--r--drivers/soundwire/qcom.c4
-rw-r--r--drivers/soundwire/stream.c98
-rw-r--r--drivers/uio/uio_dmem_genirq.c19
-rw-r--r--drivers/uio/uio_pdrv_genirq.c24
-rw-r--r--drivers/virt/vboxguest/vboxguest_core.c266
-rw-r--r--drivers/virt/vboxguest/vboxguest_core.h23
-rw-r--r--drivers/virt/vboxguest/vboxguest_utils.c1
-rw-r--r--include/asm-generic/vmlinux.lds.h6
-rw-r--r--include/dt-bindings/phy/phy.h1
-rw-r--r--include/linux/coresight.h6
-rw-r--r--include/linux/dynamic_debug.h4
-rw-r--r--include/linux/firmware/intel/stratix10-smc.h43
-rw-r--r--include/linux/firmware/intel/stratix10-svc-client.h17
-rw-r--r--include/linux/fsl/mc.h32
-rw-r--r--include/linux/interconnect-provider.h16
-rw-r--r--include/linux/mic_bus.h2
-rw-r--r--include/linux/mod_devicetable.h2
-rw-r--r--include/linux/nvmem-consumer.h1
-rw-r--r--include/linux/nvmem-provider.h3
-rw-r--r--include/linux/rtsx_pci.h33
-rw-r--r--include/linux/soundwire/sdw.h33
-rw-r--r--include/linux/soundwire/sdw_intel.h2
-rw-r--r--include/linux/soundwire/sdw_registers.h117
-rw-r--r--include/linux/vbox_utils.h1
-rw-r--r--include/linux/vmw_vmci_defs.h2
-rw-r--r--include/uapi/linux/android/binder.h2
-rw-r--r--include/uapi/linux/fpga-dfl.h82
-rw-r--r--include/uapi/linux/raw.h2
-rw-r--r--include/uapi/linux/vbox_vmmdev_types.h3
-rw-r--r--include/uapi/linux/vboxguest.h24
-rw-r--r--include/uapi/misc/habanalabs.h27
-rw-r--r--kernel/module.c2
-rw-r--r--lib/dynamic_debug.c269
-rwxr-xr-xscripts/headers_install.sh1
-rw-r--r--scripts/mod/devicetable-offsets.c2
-rw-r--r--scripts/mod/file2alias.c6
-rwxr-xr-xtools/testing/selftests/lkdtm/run.sh6
-rw-r--r--tools/testing/selftests/lkdtm/tests.txt1
291 files changed, 10369 insertions, 4128 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-mei b/Documentation/ABI/testing/sysfs-class-mei
index e9dc110650ae..5c52372b43cb 100644
--- a/Documentation/ABI/testing/sysfs-class-mei
+++ b/Documentation/ABI/testing/sysfs-class-mei
@@ -90,3 +90,16 @@ Description: Display trc status register content
The ME FW writes Glitch Detection HW (TRC)
status information into trc status register
for BIOS and OS to monitor fw health.
+
+What: /sys/class/mei/meiN/kind
+Date: Jul 2020
+KernelVersion: 5.8
+Contact: Tomas Winkler <tomas.winkler@intel.com>
+Description: Display kind of the device
+
+ Generic devices are marked as "mei"
+ while special purpose have their own
+ names.
+ Available options:
+ - mei: generic mei device.
+ - itouch: itouch (ipts) mei device.
diff --git a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
index ae9af984471a..a8daceb4a956 100644
--- a/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
+++ b/Documentation/ABI/testing/sysfs-devices-platform-stratix10-rsu
@@ -126,3 +126,39 @@ Description:
1 no action
0 firmware record the notify code defined
in b[15:0].
+
+What: /sys/devices/platform/stratix10-rsu.0/dcmf0
+Date: June 2020
+KernelVersion: 5.8
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) Decision firmware copy 0 version information.
+
+What: /sys/devices/platform/stratix10-rsu.0/dcmf1
+Date: June 2020
+KernelVersion: 5.8
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) Decision firmware copy 1 version information.
+
+What: /sys/devices/platform/stratix10-rsu.0/dcmf2
+Date: June 2020
+KernelVersion: 5.8
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) Decision firmware copy 2 version information.
+
+What: /sys/devices/platform/stratix10-rsu.0/dcmf3
+Date: June 2020
+KernelVersion: 5.8
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) Decision firmware copy 3 version information.
+
+What: /sys/devices/platform/stratix10-rsu.0/max_retry
+Date: June 2020
+KernelVersion: 5.8
+Contact: Richard Gong <richard.gong@linux.intel.com>
+Description:
+ (RO) max retry parameter is stored in the firmware
+ decision IO section, as a byte located at offset 0x18c.
diff --git a/Documentation/admin-guide/dynamic-debug-howto.rst b/Documentation/admin-guide/dynamic-debug-howto.rst
index 1012bd9305e9..e5a8def45f3f 100644
--- a/Documentation/admin-guide/dynamic-debug-howto.rst
+++ b/Documentation/admin-guide/dynamic-debug-howto.rst
@@ -70,10 +70,10 @@ statements via::
nullarbor:~ # cat <debugfs>/dynamic_debug/control
# filename:lineno [module]function flags format
- /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
- /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline : %d\012"
- /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth : %d\012"
- /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests : %d\012"
+ net/sunrpc/svc_rdma.c:323 [svcxprt_rdma]svc_rdma_cleanup =_ "SVCRDMA Module Removed, deregister RPC RDMA transport\012"
+ net/sunrpc/svc_rdma.c:341 [svcxprt_rdma]svc_rdma_init =_ "\011max_inline : %d\012"
+ net/sunrpc/svc_rdma.c:340 [svcxprt_rdma]svc_rdma_init =_ "\011sq_depth : %d\012"
+ net/sunrpc/svc_rdma.c:338 [svcxprt_rdma]svc_rdma_init =_ "\011max_requests : %d\012"
...
@@ -93,7 +93,7 @@ the debug statement callsites with any non-default flags::
nullarbor:~ # awk '$3 != "=_"' <debugfs>/dynamic_debug/control
# filename:lineno [module]function flags format
- /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
+ net/sunrpc/svcsock.c:1603 [sunrpc]svc_send p "svc_process: st_sendto returned %d\012"
Command Language Reference
==========================
@@ -156,6 +156,7 @@ against. Possible keywords are:::
``line-range`` cannot contain space, e.g.
"1-30" is valid range but "1 - 30" is not.
+ ``module=foo`` combined keyword=value form is interchangably accepted
The meanings of each keyword are:
@@ -164,15 +165,18 @@ func
of each callsite. Example::
func svc_tcp_accept
+ func *recv* # in rfcomm, bluetooth, ping, tcp
file
- The given string is compared against either the full pathname, the
- src-root relative pathname, or the basename of the source file of
- each callsite. Examples::
+ The given string is compared against either the src-root relative
+ pathname, or the basename of the source file of each callsite.
+ Examples::
file svcsock.c
- file kernel/freezer.c
- file /usr/src/packages/BUILD/sgi-enhancednfs-1.4/default/net/sunrpc/svcsock.c
+ file kernel/freezer.c # ie column 1 of control file
+ file drivers/usb/* # all callsites under it
+ file inode.c:start_* # parse :tail as a func (above)
+ file inode.c:1-100 # parse :tail as a line-range (above)
module
The given string is compared against the module name
@@ -182,6 +186,7 @@ module
module sunrpc
module nfsd
+ module drm* # both drm, drm_kms_helper
format
The given string is searched for in the dynamic debug format
@@ -251,8 +256,8 @@ the syntax described above, but must not exceed 1023 characters. Your
bootloader may impose lower limits.
These ``dyndbg`` params are processed just after the ddebug tables are
-processed, as part of the arch_initcall. Thus you can enable debug
-messages in all code run after this arch_initcall via this boot
+processed, as part of the early_initcall. Thus you can enable debug
+messages in all code run after this early_initcall via this boot
parameter.
On an x86 system for example ACPI enablement is a subsys_initcall and::
diff --git a/Documentation/devicetree/bindings/arm/coresight.txt b/Documentation/devicetree/bindings/arm/coresight.txt
index 846f6daae71b..d711676b4a51 100644
--- a/Documentation/devicetree/bindings/arm/coresight.txt
+++ b/Documentation/devicetree/bindings/arm/coresight.txt
@@ -108,6 +108,13 @@ its hardware characteristcs.
* arm,cp14: must be present if the system accesses ETM/PTM management
registers via co-processor 14.
+ * qcom,skip-power-up: boolean. Indicates that an implementation can
+ skip powering up the trace unit. TRCPDCR.PU does not have to be set
+ on Qualcomm Technologies Inc. systems since ETMs are in the same power
+ domain as their CPU cores. This property is required to identify such
+ systems with hardware errata where the CPU watchdog counter is stopped
+ when TRCPDCR.PU is set.
+
* Optional property for TMC:
* arm,buffer-size: size of contiguous buffer space for TMC ETR
@@ -121,6 +128,12 @@ its hardware characteristcs.
* interrupts : Exactly one SPI may be listed for reporting the address
error
+* Optional property for configurable replicators:
+
+ * qcom,replicator-loses-context: boolean. Indicates that the replicator
+ will lose register context when AMBA clock is removed which is observed
+ in some replicator designs.
+
Graph bindings for Coresight
-------------------------------
diff --git a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
index cfa4ed42b62f..5ef659c1394d 100644
--- a/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
+++ b/Documentation/devicetree/bindings/fpga/xilinx-slave-serial.txt
@@ -1,11 +1,14 @@
Xilinx Slave Serial SPI FPGA Manager
-Xilinx Spartan-6 FPGAs support a method of loading the bitstream over
-what is referred to as "slave serial" interface.
+Xilinx Spartan-6 and 7 Series FPGAs support a method of loading the
+bitstream over what is referred to as "slave serial" interface.
The slave serial link is not technically SPI, and might require extra
circuits in order to play nicely with other SPI slaves on the same bus.
-See https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+See:
+- https://www.xilinx.com/support/documentation/user_guides/ug380.pdf
+- https://www.xilinx.com/support/documentation/user_guides/ug470_7Series_Config.pdf
+- https://www.xilinx.com/support/documentation/application_notes/xapp583-fpga-configuration.pdf
Required properties:
- compatible: should contain "xlnx,fpga-slave-serial"
@@ -13,6 +16,10 @@ Required properties:
- prog_b-gpios: config pin (referred to as PROGRAM_B in the manual)
- done-gpios: config status pin (referred to as DONE in the manual)
+Optional properties:
+- init-b-gpios: initialization status and configuration error pin
+ (referred to as INIT_B in the manual)
+
Example for full FPGA configuration:
fpga-region0 {
@@ -37,7 +44,8 @@ Example for full FPGA configuration:
spi-max-frequency = <60000000>;
spi-cpha;
reg = <0>;
- done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
prog_b-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ init-b-gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ done-gpios = <&gpio0 9 GPIO_ACTIVE_HIGH>;
};
};
diff --git a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
index daf1321d76ad..6687ab720304 100644
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sun4i-a10-sid.yaml
@@ -15,14 +15,17 @@ allOf:
properties:
compatible:
- enum:
- - allwinner,sun4i-a10-sid
- - allwinner,sun7i-a20-sid
- - allwinner,sun8i-a83t-sid
- - allwinner,sun8i-h3-sid
- - allwinner,sun50i-a64-sid
- - allwinner,sun50i-h5-sid
- - allwinner,sun50i-h6-sid
+ oneOf:
+ - const: allwinner,sun4i-a10-sid
+ - const: allwinner,sun7i-a20-sid
+ - const: allwinner,sun8i-a83t-sid
+ - const: allwinner,sun8i-h3-sid
+ - const: allwinner,sun50i-a64-sid
+ - items:
+ - const: allwinner,sun50i-a100-sid
+ - const: allwinner,sun50i-a64-sid
+ - const: allwinner,sun50i-h5-sid
+ - const: allwinner,sun50i-h6-sid
reg:
maxItems: 1
diff --git a/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
new file mode 100644
index 000000000000..d10a0cf91ba7
--- /dev/null
+++ b/Documentation/devicetree/bindings/nvmem/qcom,qfprom.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/nvmem/qcom,qfprom.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies Inc, QFPROM Efuse bindings
+
+maintainers:
+ - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+
+allOf:
+ - $ref: "nvmem.yaml#"
+
+properties:
+ compatible:
+ const: qcom,qfprom
+
+ reg:
+ # If the QFPROM is read-only OS image then only the corrected region
+ # needs to be provided. If the QFPROM is writable then all 4 regions
+ # must be provided.
+ oneOf:
+ - items:
+ - description: The corrected region.
+ - items:
+ - description: The corrected region.
+ - description: The raw region.
+ - description: The config region.
+ - description: The security control region.
+
+ # Clock must be provided if QFPROM is writable from the OS image.
+ clocks:
+ maxItems: 1
+ clock-names:
+ const: core
+
+ # Supply reference must be provided if QFPROM is writable from the OS image.
+ vcc-supply:
+ description: Our power supply.
+
+ # Needed if any child nodes are present.
+ "#address-cells":
+ const: 1
+ "#size-cells":
+ const: 1
+
+required:
+ - compatible
+ - reg
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sc7180.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ efuse@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0 0x00784000 0 0x8ff>,
+ <0 0x00780000 0 0x7a0>,
+ <0 0x00782000 0 0x100>,
+ <0 0x00786000 0 0x1fff>;
+ clocks = <&gcc GCC_SEC_CTRL_CLK_SRC>;
+ clock-names = "core";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ vcc-supply = <&vreg_l11a_1p8>;
+
+ hstx-trim-primary@25b {
+ reg = <0x25b 0x1>;
+ bits = <1 3>;
+ };
+ };
+ };
+
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ efuse@784000 {
+ compatible = "qcom,qfprom";
+ reg = <0 0x00784000 0 0x8ff>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ hstx-trim-primary@1eb {
+ reg = <0x1eb 0x1>;
+ bits = <1 4>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/nvmem/qfprom.txt b/Documentation/devicetree/bindings/nvmem/qfprom.txt
deleted file mode 100644
index 26fe878d5c86..000000000000
--- a/Documentation/devicetree/bindings/nvmem/qfprom.txt
+++ /dev/null
@@ -1,35 +0,0 @@
-= Qualcomm QFPROM device tree bindings =
-
-This binding is intended to represent QFPROM which is found in most QCOM SOCs.
-
-Required properties:
-- compatible: should be "qcom,qfprom"
-- reg: Should contain registers location and length
-
-= Data cells =
-Are child nodes of qfprom, bindings of which as described in
-bindings/nvmem/nvmem.txt
-
-Example:
-
- qfprom: qfprom@700000 {
- compatible = "qcom,qfprom";
- reg = <0x00700000 0x8000>;
- ...
- /* Data cells */
- tsens_calibration: calib@404 {
- reg = <0x4404 0x10>;
- };
- };
-
-
-= Data consumers =
-Are device nodes which consume nvmem data cells.
-
-For example:
-
- tsens {
- ...
- nvmem-cells = <&tsens_calibration>;
- nvmem-cell-names = "calibration";
- };
diff --git a/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
new file mode 100644
index 000000000000..9a2e779e6d38
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,bcm63xx-usbh-phy.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/phy/brcm,bcm63xx-usbh-phy.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: BCM63xx USBH PHY
+
+maintainers:
+ - Álvaro Fernández Rojas <noltari@gmail.com>
+
+properties:
+ compatible:
+ enum:
+ - brcm,bcm6318-usbh-phy
+ - brcm,bcm6328-usbh-phy
+ - brcm,bcm6358-usbh-phy
+ - brcm,bcm6362-usbh-phy
+ - brcm,bcm6368-usbh-phy
+ - brcm,bcm63268-usbh-phy
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: usbh
+ - const: usb_ref
+
+ resets:
+ maxItems: 1
+
+ "#phy-cells":
+ const: 1
+
+additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+ - resets
+ - "#phy-cells"
+
+if:
+ properties:
+ compatible:
+ enum:
+ - brcm,bcm6318-usbh-phy
+ - brcm,bcm6328-usbh-phy
+ - brcm,bcm6362-usbh-phy
+ - brcm,bcm63268-usbh-phy
+then:
+ properties:
+ power-domains:
+ maxItems: 1
+ required:
+ - power-domains
+else:
+ properties:
+ power-domains: false
+
+examples:
+ - |
+ usbh: usb-phy@10001700 {
+ compatible = "brcm,bcm6368-usbh-phy";
+ reg = <0x10001700 0x38>;
+ clocks = <&periph_clk 15>;
+ clock-names = "usbh";
+ resets = <&periph_rst 12>;
+ #phy-cells = <1>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
index ad49e5c01334..8b5a7a28a35b 100644
--- a/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
+++ b/Documentation/devicetree/bindings/phy/phy-armada38x-comphy.txt
@@ -12,6 +12,13 @@ Required properties:
- #address-cells: should be 1.
- #size-cells: should be 0.
+Optional properties:
+
+- reg-names: must be "comphy" as the first name, and "conf".
+- reg: must contain the comphy register location and length as the first
+ pair, followed by an optional configuration register address and
+ length pair.
+
A sub-node is required for each comphy lane provided by the comphy.
Required properties (child nodes):
@@ -24,7 +31,8 @@ Example:
comphy: phy@18300 {
compatible = "marvell,armada-380-comphy";
- reg = <0x18300 0x100>;
+ reg-names = "comphy", "conf";
+ reg = <0x18300 0x100>, <0x18460 4>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
new file mode 100644
index 000000000000..23887ebe08fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-hs.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-hs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 HS PHY CONTROLLER
+
+maintainers:
+ - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+ DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+ controllers used in ipq806x. Each DWC3 PHY controller should have its
+ own node.
+
+properties:
+ compatible:
+ const: qcom,ipq806x-usb-phy-hs
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: ref
+ - const: xo
+
+required:
+ - compatible
+ - "#phy-cells"
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+ hs_phy_0: phy@110f8800 {
+ compatible = "qcom,ipq806x-usb-phy-hs";
+ reg = <0x110f8800 0x30>;
+ clocks = <&gcc USB30_0_UTMI_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
new file mode 100644
index 000000000000..fa30c24b4405
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq806x-usb-phy-ss.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq806x-usb-phy-ss.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm ipq806x usb DWC3 SS PHY CONTROLLER
+
+maintainers:
+ - Ansuel Smith <ansuelsmth@gmail.com>
+
+description:
+ DWC3 PHY nodes are defined to describe on-chip Synopsis Physical layer
+ controllers used in ipq806x. Each DWC3 PHY controller should have its
+ own node.
+
+properties:
+ compatible:
+ const: qcom,ipq806x-usb-phy-ss
+
+ "#phy-cells":
+ const: 0
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ minItems: 1
+ maxItems: 2
+
+ clock-names:
+ minItems: 1
+ maxItems: 2
+ items:
+ - const: ref
+ - const: xo
+
+ qcom,rx-eq:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Override value for rx_eq.
+ default: 4
+ maximum: 7
+
+ qcom,tx-deamp-3_5db:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Override value for transmit preemphasis.
+ default: 23
+ maximum: 63
+
+ qcom,mpll:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ description: Override value for mpll.
+ default: 0
+ maximum: 7
+
+required:
+ - compatible
+ - "#phy-cells"
+ - reg
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-ipq806x.h>
+
+ ss_phy_0: phy@110f8830 {
+ compatible = "qcom,ipq806x-usb-phy-ss";
+ reg = <0x110f8830 0x30>;
+ clocks = <&gcc USB30_0_MASTER_CLK>;
+ clock-names = "ref";
+ #phy-cells = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
index f80f8896d527..e4cd4a1deae9 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qmp-phy.yaml
@@ -18,6 +18,7 @@ properties:
compatible:
enum:
- qcom,ipq8074-qmp-pcie-phy
+ - qcom,ipq8074-qmp-usb3-phy
- qcom,msm8996-qmp-pcie-phy
- qcom,msm8996-qmp-ufs-phy
- qcom,msm8996-qmp-usb3-phy
@@ -161,6 +162,7 @@ allOf:
compatible:
contains:
enum:
+ - qcom,ipq8074-qmp-usb3-phy
- qcom,msm8996-qmp-usb3-phy
- qcom,msm8998-qmp-pcie-phy
- qcom,msm8998-qmp-usb3-phy
diff --git a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
index b5a6195de7ff..9ba62dcb1e5d 100644
--- a/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,qusb2-phy.yaml
@@ -18,6 +18,7 @@ properties:
oneOf:
- items:
- enum:
+ - qcom,ipq8074-qusb2-phy
- qcom,msm8996-qusb2-phy
- qcom,msm8998-qusb2-phy
- items:
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
index 440f09fddf93..829e8c7e467a 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb2-phy.yaml
@@ -21,6 +21,7 @@ properties:
- renesas,usb2-phy-r8a774a1 # RZ/G2M
- renesas,usb2-phy-r8a774b1 # RZ/G2N
- renesas,usb2-phy-r8a774c0 # RZ/G2E
+ - renesas,usb2-phy-r8a774e1 # RZ/G2H
- renesas,usb2-phy-r8a7795 # R-Car H3
- renesas,usb2-phy-r8a7796 # R-Car M3-W
- renesas,usb2-phy-r8a77961 # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
index 68cf9dd0390d..f3ef738a3ff6 100644
--- a/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/renesas,usb3-phy.yaml
@@ -15,6 +15,7 @@ properties:
- enum:
- renesas,r8a774a1-usb3-phy # RZ/G2M
- renesas,r8a774b1-usb3-phy # RZ/G2N
+ - renesas,r8a774e1-usb3-phy # RZ/G2H
- renesas,r8a7795-usb3-phy # R-Car H3
- renesas,r8a7796-usb3-phy # R-Car M3-W
- renesas,r8a77961-usb3-phy # R-Car M3-W+
diff --git a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
new file mode 100644
index 000000000000..636cc501b54f
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
@@ -0,0 +1,75 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/samsung,ufs-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung SoC series UFS PHY Device Tree Bindings
+
+maintainers:
+ - Alim Akhtar <alim.akhtar@samsung.com>
+
+properties:
+ "#phy-cells":
+ const: 0
+
+ compatible:
+ enum:
+ - samsung,exynos7-ufs-phy
+
+ reg:
+ maxItems: 1
+
+ reg-names:
+ items:
+ - const: phy-pma
+
+ clocks:
+ items:
+ - description: PLL reference clock
+ - description: symbol clock for input symbol ( rx0-ch0 symbol clock)
+ - description: symbol clock for input symbol ( rx1-ch1 symbol clock)
+ - description: symbol clock for output symbol ( tx0 symbol clock)
+
+ clock-names:
+ items:
+ - const: ref_clk
+ - const: rx1_symbol_clk
+ - const: rx0_symbol_clk
+ - const: tx0_symbol_clk
+
+ samsung,pmu-syscon:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: phandle for PMU system controller interface, used to
+ control pmu registers bits for ufs m-phy
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - samsung,pmu-syscon
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos7-clk.h>
+
+ ufs_phy: ufs-phy@15571800 {
+ compatible = "samsung,exynos7-ufs-phy";
+ reg = <0x15571800 0x240>;
+ reg-names = "phy-pma";
+ samsung,pmu-syscon = <&pmu_system_controller>;
+ #phy-cells = <0>;
+ clocks = <&clock_fsys1 SCLK_COMBO_PHY_EMBEDDED_26M>,
+ <&clock_fsys1 PHYCLK_UFS20_RX1_SYMBOL_USER>,
+ <&clock_fsys1 PHYCLK_UFS20_RX0_SYMBOL_USER>,
+ <&clock_fsys1 PHYCLK_UFS20_TX0_SYMBOL_USER>;
+ clock-names = "ref_clk", "rx1_symbol_clk",
+ "rx0_symbol_clk", "tx0_symbol_clk";
+
+ };
+...
diff --git a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
index f88d36207b87..c871d462c952 100644
--- a/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/socionext,uniphier-usb3hs-phy.yaml
@@ -31,12 +31,16 @@ properties:
clocks:
minItems: 1
- maxItems: 2
+ maxItems: 3
clock-names:
oneOf:
- const: link # for PXs2
- - items: # for PXs3
+ - items: # for PXs3 with phy-ext
+ - const: link
+ - const: phy
+ - const: phy-ext
+ - items: # for others
- const: link
- const: phy
diff --git a/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
new file mode 100644
index 000000000000..04d5654efb38
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
@@ -0,0 +1,105 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/xlnx,zynqmp-psgtr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Xilinx ZynqMP Gigabit Transceiver PHY Device Tree Bindings
+
+maintainers:
+ - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+description: |
+ This binding describes the Xilinx ZynqMP Gigabit Transceiver (GTR) PHY. The
+ GTR provides four lanes and is used by USB, SATA, PCIE, Display port and
+ Ethernet SGMII controllers.
+
+properties:
+ "#phy-cells":
+ const: 4
+ description: |
+ The cells contain the following arguments.
+
+ - description: The GTR lane
+ minimum: 0
+ maximum: 3
+ - description: The PHY type
+ enum:
+ - PHY_TYPE_DP
+ - PHY_TYPE_PCIE
+ - PHY_TYPE_SATA
+ - PHY_TYPE_SGMII
+ - PHY_TYPE_USB
+ - description: The PHY instance
+ minimum: 0
+ maximum: 1 # for DP, SATA or USB
+ maximum: 3 # for PCIE or SGMII
+ - description: The reference clock number
+ minimum: 0
+ maximum: 3
+
+ compatible:
+ enum:
+ - xlnx,zynqmp-psgtr-v1.1
+ - xlnx,zynqmp-psgtr
+
+ clocks:
+ minItems: 1
+ maxItems: 4
+ description: |
+ Clock for each PS_MGTREFCLK[0-3] reference clock input. Unconnected
+ inputs shall not have an entry.
+
+ clock-names:
+ minItems: 1
+ maxItems: 4
+ items:
+ pattern: "^ref[0-3]$"
+
+ reg:
+ items:
+ - description: SERDES registers block
+ - description: SIOU registers block
+
+ reg-names:
+ items:
+ - const: serdes
+ - const: siou
+
+ xlnx,tx-termination-fix:
+ description: |
+ Include this for fixing functional issue with the TX termination
+ resistance in GT, which can be out of spec for the XCZU9EG silicon
+ version.
+ type: boolean
+
+required:
+ - "#phy-cells"
+ - compatible
+ - reg
+ - reg-names
+
+if:
+ properties:
+ compatible:
+ const: xlnx,zynqmp-psgtr-v1.1
+
+then:
+ properties:
+ xlnx,tx-termination-fix: false
+
+additionalProperties: false
+
+examples:
+ - |
+ phy: phy@fd400000 {
+ compatible = "xlnx,zynqmp-psgtr-v1.1";
+ reg = <0xfd400000 0x40000>,
+ <0xfd3d0000 0x1000>;
+ reg-names = "serdes", "siou";
+ clocks = <&refclks 3>, <&refclks 2>, <&refclks 0>;
+ clock-names = "ref1", "ref2", "ref3";
+ #phy-cells = <4>;
+ };
+
+...
diff --git a/Documentation/driver-api/firmware/built-in-fw.rst b/Documentation/driver-api/firmware/built-in-fw.rst
index 396cdf591ac5..bc1c961bace1 100644
--- a/Documentation/driver-api/firmware/built-in-fw.rst
+++ b/Documentation/driver-api/firmware/built-in-fw.rst
@@ -28,6 +28,6 @@ able to make use of built-in firmware:
* Some firmware files may be really large in size. The remote-proc subsystem
is an example subsystem which deals with these sorts of firmware
* The firmware may need to be scraped out from some device specific location
- dynamically, an example is calibration data for for some WiFi chipsets. This
+ dynamically, an example is calibration data for some WiFi chipsets. This
calibration data can be unique per sold device.
diff --git a/Documentation/driver-api/firmware/direct-fs-lookup.rst b/Documentation/driver-api/firmware/direct-fs-lookup.rst
index 82b4d585a213..e04353d1b06b 100644
--- a/Documentation/driver-api/firmware/direct-fs-lookup.rst
+++ b/Documentation/driver-api/firmware/direct-fs-lookup.rst
@@ -24,7 +24,7 @@ available. Stuffing the firmware into initramfs resolves this race issue,
however note that using initrd does not suffice to address the same race.
There are circumstances that justify not wanting to include firmware into
-initramfs, such as dealing with large firmware firmware files for the
+initramfs, such as dealing with large firmware files for the
remote-proc subsystem. For such cases using a userspace fallback mechanism
is currently the only viable solution as only userspace can know for sure
when the real rootfs is ready and mounted.
diff --git a/Documentation/driver-api/firmware/firmware_cache.rst b/Documentation/driver-api/firmware/firmware_cache.rst
index c2e69d9c6bf1..417b9e8347f0 100644
--- a/Documentation/driver-api/firmware/firmware_cache.rst
+++ b/Documentation/driver-api/firmware/firmware_cache.rst
@@ -27,7 +27,7 @@ Some implementation details about the firmware cache setup:
uses all synchronous call except :c:func:`request_firmware_into_buf`.
* If an asynchronous call is used the firmware cache is only set up for a
- device if if the second argument (uevent) to request_firmware_nowait() is
+ device if the second argument (uevent) to request_firmware_nowait() is
true. When uevent is true it requests that a kobject uevent be sent to
userspace for the firmware request through the sysfs fallback mechanism
if the firmware file is not found.
diff --git a/Documentation/driver-api/firmware/request_firmware.rst b/Documentation/driver-api/firmware/request_firmware.rst
index cd076462d235..0d6ea0329995 100644
--- a/Documentation/driver-api/firmware/request_firmware.rst
+++ b/Documentation/driver-api/firmware/request_firmware.rst
@@ -76,5 +76,5 @@ firmware. For example if you used request_firmware() and it returns,
the driver has the firmware image accessible in fw_entry->{data,size}.
If something went wrong request_firmware() returns non-zero and fw_entry
is set to NULL. Once your driver is done with processing the firmware it
-can call call release_firmware(fw_entry) to release the firmware image
+can call release_firmware(fw_entry) to release the firmware image
and any related resource.
diff --git a/Documentation/driver-api/soundwire/stream.rst b/Documentation/driver-api/soundwire/stream.rst
index 1b386076402c..8858cea7bfe0 100644
--- a/Documentation/driver-api/soundwire/stream.rst
+++ b/Documentation/driver-api/soundwire/stream.rst
@@ -293,6 +293,10 @@ per stream. From ASoC DPCM framework, this stream state maybe linked to
int sdw_alloc_stream(char * stream_name);
+The SoundWire core provides a sdw_startup_stream() helper function,
+typically called during a dailink .startup() callback, which performs
+stream allocation and sets the stream pointer for all DAIs
+connected to a stream.
SDW_STREAM_CONFIGURED
~~~~~~~~~~~~~~~~~~~~~
@@ -509,7 +513,12 @@ In .shutdown() the data structure maintaining stream state are freed up.
void sdw_release_stream(struct sdw_stream_runtime * stream);
-Not Supported
+The SoundWire core provides a sdw_shutdown_stream() helper function,
+typically called during a dailink .shutdown() callback, which clears
+the stream pointer for all DAIS connected to a stream and releases the
+memory allocated for the stream.
+
+ Not Supported
=============
1. A single port with multiple channels supported cannot be used between two
diff --git a/Documentation/driver-api/uio-howto.rst b/Documentation/driver-api/uio-howto.rst
index 84091cd25dc4..907ffa3b38f5 100644
--- a/Documentation/driver-api/uio-howto.rst
+++ b/Documentation/driver-api/uio-howto.rst
@@ -274,7 +274,7 @@ fields of ``struct uio_mem``:
region, it will show up in the corresponding sysfs node.
- ``int memtype``: Required if the mapping is used. Set this to
- ``UIO_MEM_PHYS`` if you you have physical memory on your card to be
+ ``UIO_MEM_PHYS`` if you have physical memory on your card to be
mapped. Use ``UIO_MEM_LOGICAL`` for logical memory (e.g. allocated
with :c:func:`__get_free_pages()` but not kmalloc()). There's also
``UIO_MEM_VIRTUAL`` for virtual memory.
diff --git a/Documentation/driver-api/xillybus.rst b/Documentation/driver-api/xillybus.rst
index 2446ee303c09..a3ab832cb22b 100644
--- a/Documentation/driver-api/xillybus.rst
+++ b/Documentation/driver-api/xillybus.rst
@@ -273,7 +273,7 @@ buffer is full, the FPGA informs the host about that (appending a
XILLYMSG_OPCODE_RELEASEBUF message channel 0 and sending an interrupt if
necessary). The host responds by making the data available for reading through
the character device. When all data has been read, the host writes on the
-the FPGA's buffer control register, allowing the buffer's overwriting. Flow
+FPGA's buffer control register, allowing the buffer's overwriting. Flow
control mechanisms exist on both sides to prevent underflows and overflows.
This is not good enough for creating a TCP/IP-like stream: If the data flow
diff --git a/Documentation/fpga/dfl.rst b/Documentation/fpga/dfl.rst
index cae96aa15671..0404fe6ffc74 100644
--- a/Documentation/fpga/dfl.rst
+++ b/Documentation/fpga/dfl.rst
@@ -89,6 +89,8 @@ The following functions are exposed through ioctls:
- Program bitstream (DFL_FPGA_FME_PORT_PR)
- Assign port to PF (DFL_FPGA_FME_PORT_ASSIGN)
- Release port from PF (DFL_FPGA_FME_PORT_RELEASE)
+- Get number of irqs of FME global error (DFL_FPGA_FME_ERR_GET_IRQ_NUM)
+- Set interrupt trigger for FME error (DFL_FPGA_FME_ERR_SET_IRQ)
More functions are exposed through sysfs
(/sys/class/fpga_region/regionX/dfl-fme.n/):
@@ -149,6 +151,10 @@ The following functions are exposed through ioctls:
- Map DMA buffer (DFL_FPGA_PORT_DMA_MAP)
- Unmap DMA buffer (DFL_FPGA_PORT_DMA_UNMAP)
- Reset AFU (DFL_FPGA_PORT_RESET)
+- Get number of irqs of port error (DFL_FPGA_PORT_ERR_GET_IRQ_NUM)
+- Set interrupt trigger for port error (DFL_FPGA_PORT_ERR_SET_IRQ)
+- Get number of irqs of UINT (DFL_FPGA_PORT_UINT_GET_IRQ_NUM)
+- Set interrupt trigger for UINT (DFL_FPGA_PORT_UINT_SET_IRQ)
DFL_FPGA_PORT_RESET:
reset the FPGA Port and its AFU. Userspace can do Port
@@ -462,6 +468,19 @@ since they are system-wide counters on FPGA device.
The current driver does not support sampling. So "perf record" is unsupported.
+Interrupt support
+=================
+Some FME and AFU private features are able to generate interrupts. As mentioned
+above, users could call ioctl (DFL_FPGA_*_GET_IRQ_NUM) to know whether or how
+many interrupts are supported for this private feature. Drivers also implement
+an eventfd based interrupt handling mechanism for users to get notified when
+interrupt happens. Users could set eventfds to driver via
+ioctl (DFL_FPGA_*_SET_IRQ), and then poll/select on these eventfds waiting for
+notification.
+In Current DFL, 3 sub features (Port error, FME global error and AFU interrupt)
+support interrupts.
+
+
Add new FIUs support
====================
It's possible that developers made some new function blocks (FIUs) under this
diff --git a/MAINTAINERS b/MAINTAINERS
index 29f69d1f42b1..8c881b4bfdff 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1179,6 +1179,8 @@ M: Todd Kjos <tkjos@android.com>
M: Martijn Coenen <maco@android.com>
M: Joel Fernandes <joel@joelfernandes.org>
M: Christian Brauner <christian@brauner.io>
+M: Hridya Valsaraju <hridya@google.com>
+M: Suren Baghdasaryan <surenb@google.com>
L: devel@driverdev.osuosl.org
S: Supported
T: git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
@@ -8833,7 +8835,7 @@ M: Tomas Winkler <tomas.winkler@intel.com>
L: linux-kernel@vger.kernel.org
S: Supported
F: Documentation/driver-api/mei/*
-F: drivers/misc/mei/*
+F: drivers/misc/mei/
F: drivers/watchdog/mei_wdt.c
F: include/linux/mei_cl_bus.h
F: include/uapi/linux/mei.h
@@ -12329,6 +12331,7 @@ F: drivers/nvme/target/
NVMEM FRAMEWORK
M: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
S: Maintained
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/srini/nvmem.git
F: Documentation/ABI/stable/sysfs-bus-nvmem
F: Documentation/devicetree/bindings/nvmem/
F: drivers/nvmem/
@@ -16082,8 +16085,9 @@ F: sound/soc/sof/
SOUNDWIRE SUBSYSTEM
M: Vinod Koul <vkoul@kernel.org>
-M: Sanyog Kale <sanyog.r.kale@intel.com>
+M: Bard Liao <yung-chuan.liao@linux.intel.com>
R: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
+R: Sanyog Kale <sanyog.r.kale@intel.com>
L: alsa-devel@alsa-project.org (moderated for non-subscribers)
S: Supported
F: Documentation/driver-api/soundwire/
@@ -18922,6 +18926,15 @@ F: Documentation/devicetree/bindings/media/xilinx/
F: drivers/media/platform/xilinx/
F: include/uapi/linux/xilinx-v4l2-controls.h
+XILINX ZYNQMP PSGTR PHY DRIVER
+M: Anurag Kumar Vulisha <anurag.kumar.vulisha@xilinx.com>
+M: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+L: linux-kernel@vger.kernel.org
+S: Supported
+T: git https://github.com/Xilinx/linux-xlnx.git
+F: Documentation/devicetree/bindings/phy/xlnx,zynqmp-psgtr.yaml
+F: drivers/phy/xilinx/phy-zynqmp.c
+
XILLYBUS DRIVER
M: Eli Billauer <eli.billauer@gmail.com>
L: linux-kernel@vger.kernel.org
diff --git a/drivers/android/binder.c b/drivers/android/binder.c
index f50c5f182bb5..f936530a19b0 100644
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@@ -1969,9 +1969,8 @@ static void binder_send_failed_reply(struct binder_transaction *t,
binder_thread_dec_tmpref(target_thread);
binder_free_transaction(t);
return;
- } else {
- __release(&target_thread->proc->inner_lock);
}
+ __release(&target_thread->proc->inner_lock);
next = t->from_parent;
binder_debug(BINDER_DEBUG_FAILED_TRANSACTION,
@@ -2760,11 +2759,10 @@ static bool binder_proc_transaction(struct binder_transaction *t,
binder_node_lock(node);
if (oneway) {
BUG_ON(thread);
- if (node->has_async_transaction) {
+ if (node->has_async_transaction)
pending_async = true;
- } else {
+ else
node->has_async_transaction = true;
- }
}
binder_inner_proc_lock(proc);
@@ -2982,6 +2980,12 @@ static void binder_transaction(struct binder_proc *proc,
goto err_dead_binder;
}
e->to_node = target_node->debug_id;
+ if (WARN_ON(proc == target_proc)) {
+ return_error = BR_FAILED_REPLY;
+ return_error_param = -EINVAL;
+ return_error_line = __LINE__;
+ goto err_invalid_target_handle;
+ }
if (security_binder_transaction(proc->tsk,
target_proc->tsk) < 0) {
return_error = BR_FAILED_REPLY;
@@ -3635,10 +3639,17 @@ static int binder_thread_write(struct binder_proc *proc,
struct binder_node *ctx_mgr_node;
mutex_lock(&context->context_mgr_node_lock);
ctx_mgr_node = context->binder_context_mgr_node;
- if (ctx_mgr_node)
+ if (ctx_mgr_node) {
+ if (ctx_mgr_node->proc == proc) {
+ binder_user_error("%d:%d context manager tried to acquire desc 0\n",
+ proc->pid, thread->pid);
+ mutex_unlock(&context->context_mgr_node_lock);
+ return -EINVAL;
+ }
ret = binder_inc_ref_for_node(
proc, ctx_mgr_node,
strong, NULL, &rdata);
+ }
mutex_unlock(&context->context_mgr_node_lock);
}
if (ret)
diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c
index cbe6aa77d50d..69609696a843 100644
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@@ -547,6 +547,7 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
{
struct binder_buffer *prev, *next = NULL;
bool to_free = true;
+
BUG_ON(alloc->buffers.next == &buffer->entry);
prev = binder_buffer_prev(buffer);
BUG_ON(!prev->free);
diff --git a/drivers/android/binderfs.c b/drivers/android/binderfs.c
index 7cf566aafe1f..7b76fefde3f8 100644
--- a/drivers/android/binderfs.c
+++ b/drivers/android/binderfs.c
@@ -1,4 +1,4 @@
-/* SPDX-License-Identifier: GPL-2.0 */
+// SPDX-License-Identifier: GPL-2.0
#include <linux/compiler_types.h>
#include <linux/errno.h>
@@ -351,6 +351,7 @@ static const struct super_operations binderfs_super_ops = {
static inline bool is_binderfs_control_device(const struct dentry *dentry)
{
struct binderfs_info *info = dentry->d_sb->s_fs_info;
+
return info->control_dentry == dentry;
}
diff --git a/drivers/bus/fsl-mc/dprc-driver.c b/drivers/bus/fsl-mc/dprc-driver.c
index 189bff2115a8..2a473c09bc33 100644
--- a/drivers/bus/fsl-mc/dprc-driver.c
+++ b/drivers/bus/fsl-mc/dprc-driver.c
@@ -27,7 +27,16 @@ static bool fsl_mc_device_match(struct fsl_mc_device *mc_dev,
{
return mc_dev->obj_desc.id == obj_desc->id &&
strcmp(mc_dev->obj_desc.type, obj_desc->type) == 0;
+}
+static bool fsl_mc_obj_desc_is_allocatable(struct fsl_mc_obj_desc *obj)
+{
+ if (strcmp(obj->type, "dpmcp") == 0 ||
+ strcmp(obj->type, "dpcon") == 0 ||
+ strcmp(obj->type, "dpbp") == 0)
+ return true;
+ else
+ return false;
}
static int __fsl_mc_device_remove_if_not_in_mc(struct device *dev, void *data)
@@ -150,6 +159,27 @@ static void check_plugged_state_change(struct fsl_mc_device *mc_dev,
}
}
+static void fsl_mc_obj_device_add(struct fsl_mc_device *mc_bus_dev,
+ struct fsl_mc_obj_desc *obj_desc)
+{
+ int error;
+ struct fsl_mc_device *child_dev;
+
+ /*
+ * Check if device is already known to Linux:
+ */
+ child_dev = fsl_mc_device_lookup(obj_desc, mc_bus_dev);
+ if (child_dev) {
+ check_plugged_state_change(child_dev, obj_desc);
+ put_device(&child_dev->dev);
+ } else {
+ error = fsl_mc_device_add(obj_desc, NULL, &mc_bus_dev->dev,
+ &child_dev);
+ if (error < 0)
+ return;
+ }
+}
+
/**
* dprc_add_new_devices - Adds devices to the logical bus for a DPRC
*
@@ -166,30 +196,23 @@ static void dprc_add_new_devices(struct fsl_mc_device *mc_bus_dev,
struct fsl_mc_obj_desc *obj_desc_array,
int num_child_objects_in_mc)
{
- int error;
int i;
+ /* probe the allocable objects first */
for (i = 0; i < num_child_objects_in_mc; i++) {
- struct fsl_mc_device *child_dev;
struct fsl_mc_obj_desc *obj_desc = &obj_desc_array[i];
- if (strlen(obj_desc->type) == 0)
- continue;
+ if (strlen(obj_desc->type) > 0 &&
+ fsl_mc_obj_desc_is_allocatable(obj_desc))
+ fsl_mc_obj_device_add(mc_bus_dev, obj_desc);
+ }
- /*
- * Check if device is already known to Linux:
- */
- child_dev = fsl_mc_device_lookup(obj_desc, mc_bus_dev);
- if (child_dev) {
- check_plugged_state_change(child_dev, obj_desc);
- put_device(&child_dev->dev);
- continue;
- }
+ for (i = 0; i < num_child_objects_in_mc; i++) {
+ struct fsl_mc_obj_desc *obj_desc = &obj_desc_array[i];
- error = fsl_mc_device_add(obj_desc, NULL, &mc_bus_dev->dev,
- &child_dev);
- if (error < 0)
- continue;
+ if (strlen(obj_desc->type) > 0 &&
+ !fsl_mc_obj_desc_is_allocatable(obj_desc))
+ fsl_mc_obj_device_add(mc_bus_dev, obj_desc);
}
}
diff --git a/drivers/bus/fsl-mc/fsl-mc-bus.c b/drivers/bus/fsl-mc/fsl-mc-bus.c
index 324d49d6df89..b69794e7364d 100644
--- a/drivers/bus/fsl-mc/fsl-mc-bus.c
+++ b/drivers/bus/fsl-mc/fsl-mc-bus.c
@@ -213,6 +213,31 @@ struct device_type fsl_mc_bus_dpseci_type = {
};
EXPORT_SYMBOL_GPL(fsl_mc_bus_dpseci_type);
+struct device_type fsl_mc_bus_dpdmux_type = {
+ .name = "fsl_mc_bus_dpdmux"
+};
+EXPORT_SYMBOL_GPL(fsl_mc_bus_dpdmux_type);
+
+struct device_type fsl_mc_bus_dpdcei_type = {
+ .name = "fsl_mc_bus_dpdcei"
+};
+EXPORT_SYMBOL_GPL(fsl_mc_bus_dpdcei_type);
+
+struct device_type fsl_mc_bus_dpaiop_type = {
+ .name = "fsl_mc_bus_dpaiop"
+};
+EXPORT_SYMBOL_GPL(fsl_mc_bus_dpaiop_type);
+
+struct device_type fsl_mc_bus_dpci_type = {
+ .name = "fsl_mc_bus_dpci"
+};
+EXPORT_SYMBOL_GPL(fsl_mc_bus_dpci_type);
+
+struct device_type fsl_mc_bus_dpdmai_type = {
+ .name = "fsl_mc_bus_dpdmai"
+};
+EXPORT_SYMBOL_GPL(fsl_mc_bus_dpdmai_type);
+
static struct device_type *fsl_mc_get_device_type(const char *type)
{
static const struct {
@@ -229,6 +254,11 @@ static struct device_type *fsl_mc_get_device_type(const char *type)
{ &fsl_mc_bus_dpmac_type, "dpmac" },
{ &fsl_mc_bus_dprtc_type, "dprtc" },
{ &fsl_mc_bus_dpseci_type, "dpseci" },
+ { &fsl_mc_bus_dpdmux_type, "dpdmux" },
+ { &fsl_mc_bus_dpdcei_type, "dpdcei" },
+ { &fsl_mc_bus_dpaiop_type, "dpaiop" },
+ { &fsl_mc_bus_dpci_type, "dpci" },
+ { &fsl_mc_bus_dpdmai_type, "dpdmai" },
{ NULL, NULL }
};
int i;
diff --git a/drivers/bus/fsl-mc/mc-io.c b/drivers/bus/fsl-mc/mc-io.c
index 6ae48ad80409..a30b53f1d87d 100644
--- a/drivers/bus/fsl-mc/mc-io.c
+++ b/drivers/bus/fsl-mc/mc-io.c
@@ -82,7 +82,7 @@ int __must_check fsl_create_mc_io(struct device *dev,
mc_io->portal_phys_addr = mc_portal_phys_addr;
mc_io->portal_size = mc_portal_size;
if (flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
- spin_lock_init(&mc_io->spinlock);
+ raw_spin_lock_init(&mc_io->spinlock);
else
mutex_init(&mc_io->mutex);
diff --git a/drivers/bus/fsl-mc/mc-sys.c b/drivers/bus/fsl-mc/mc-sys.c
index 3221a7fbaf0a..85a0225db522 100644
--- a/drivers/bus/fsl-mc/mc-sys.c
+++ b/drivers/bus/fsl-mc/mc-sys.c
@@ -251,7 +251,7 @@ int mc_send_command(struct fsl_mc_io *mc_io, struct fsl_mc_command *cmd)
return -EINVAL;
if (mc_io->flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
- spin_lock_irqsave(&mc_io->spinlock, irq_flags);
+ raw_spin_lock_irqsave(&mc_io->spinlock, irq_flags);
else
mutex_lock(&mc_io->mutex);
@@ -287,7 +287,7 @@ int mc_send_command(struct fsl_mc_io *mc_io, struct fsl_mc_command *cmd)
error = 0;
common_exit:
if (mc_io->flags & FSL_MC_IO_ATOMIC_CONTEXT_PORTAL)
- spin_unlock_irqrestore(&mc_io->spinlock, irq_flags);
+ raw_spin_unlock_irqrestore(&mc_io->spinlock, irq_flags);
else
mutex_unlock(&mc_io->mutex);
diff --git a/drivers/char/Kconfig b/drivers/char/Kconfig
index 98c3a5d8003e..b1bd336761b1 100644
--- a/drivers/char/Kconfig
+++ b/drivers/char/Kconfig
@@ -38,7 +38,7 @@ config PRINTER
box (as opposed to using a serial printer; if the connector at the
printer has 9 or 25 holes ["female"], then it's serial), say Y.
Also read the Printing-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
+ <https://www.tldp.org/docs.html#howto>.
It is possible to share one parallel port among several devices
(e.g. printer and ZIP drive) and it is safe to compile the
@@ -201,7 +201,7 @@ config DTLK
depends on ISA
help
This driver is for the DoubleTalk PC, a speech synthesizer
- manufactured by RC Systems (<http://www.rcsys.com/>). It is also
+ manufactured by RC Systems (<https://www.rcsys.com/>). It is also
called the `internal DoubleTalk'.
To compile this driver as a module, choose M here: the
@@ -237,7 +237,7 @@ config APPLICOM
This driver provides the kernel-side support for the intelligent
fieldbus cards made by Applicom International. More information
about these cards can be found on the WWW at the address
- <http://www.applicom-int.com/>, or by email from David Woodhouse
+ <https://www.applicom-int.com/>, or by email from David Woodhouse
<dwmw2@infradead.org>.
To compile this driver as a module, choose M here: the
diff --git a/drivers/char/mwave/smapi.c b/drivers/char/mwave/smapi.c
index 691f5898bb32..f8d79d393b69 100644
--- a/drivers/char/mwave/smapi.c
+++ b/drivers/char/mwave/smapi.c
@@ -126,7 +126,7 @@ static int smapi_request(unsigned short inBX, unsigned short inCX,
int smapi_query_DSP_cfg(SMAPI_DSP_SETTINGS * pSettings)
{
- int bRC = -EIO;
+ int bRC;
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
static const unsigned short ausDspBases[] = {
0x0030, 0x4E30, 0x8E30, 0xCE30,
@@ -497,7 +497,7 @@ exit_smapi_request_error:
int smapi_set_DSP_power_state(bool bOn)
{
- int bRC = -EIO;
+ int bRC;
unsigned short usAX, usBX, usCX, usDX, usDI, usSI;
unsigned short usPowerFunction;
diff --git a/drivers/char/raw.c b/drivers/char/raw.c
index 3484e9145aea..380bf518338e 100644
--- a/drivers/char/raw.c
+++ b/drivers/char/raw.c
@@ -37,7 +37,7 @@ static struct raw_device_data *raw_devices;
static DEFINE_MUTEX(raw_mutex);
static const struct file_operations raw_ctl_fops; /* forward declaration */
-static int max_raw_minors = MAX_RAW_MINORS;
+static int max_raw_minors = CONFIG_MAX_RAW_DEVS;
module_param(max_raw_minors, int, 0);
MODULE_PARM_DESC(max_raw_minors, "Maximum number of raw devices (1-65536)");
@@ -317,9 +317,9 @@ static int __init raw_init(void)
int ret;
if (max_raw_minors < 1 || max_raw_minors > 65536) {
- printk(KERN_WARNING "raw: invalid max_raw_minors (must be"
- " between 1 and 65536), using %d\n", MAX_RAW_MINORS);
- max_raw_minors = MAX_RAW_MINORS;
+ pr_warn("raw: invalid max_raw_minors (must be between 1 and 65536), using %d\n",
+ CONFIG_MAX_RAW_DEVS);
+ max_raw_minors = CONFIG_MAX_RAW_DEVS;
}
raw_devices = vzalloc(array_size(max_raw_minors,
diff --git a/drivers/char/ttyprintk.c b/drivers/char/ttyprintk.c
index 56db949a7b70..6a0059e508e3 100644
--- a/drivers/char/ttyprintk.c
+++ b/drivers/char/ttyprintk.c
@@ -172,7 +172,7 @@ static struct tty_driver *ttyprintk_driver;
static int __init ttyprintk_init(void)
{
- int ret = -ENOMEM;
+ int ret;
spin_lock_init(&tpk_port.spinlock);
diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c
index ca691bce9791..a2da8f768b94 100644
--- a/drivers/char/virtio_console.c
+++ b/drivers/char/virtio_console.c
@@ -2112,18 +2112,18 @@ fail:
return err;
}
-static struct virtio_device_id id_table[] = {
+static const struct virtio_device_id id_table[] = {
{ VIRTIO_ID_CONSOLE, VIRTIO_DEV_ANY_ID },
{ 0 },
};
MODULE_DEVICE_TABLE(virtio, id_table);
-static unsigned int features[] = {
+static const unsigned int features[] = {
VIRTIO_CONSOLE_F_SIZE,
VIRTIO_CONSOLE_F_MULTIPORT,
};
-static struct virtio_device_id rproc_serial_id_table[] = {
+static const struct virtio_device_id rproc_serial_id_table[] = {
#if IS_ENABLED(CONFIG_REMOTEPROC)
{ VIRTIO_ID_RPROC_SERIAL, VIRTIO_DEV_ANY_ID },
#endif
@@ -2131,7 +2131,7 @@ static struct virtio_device_id rproc_serial_id_table[] = {
};
MODULE_DEVICE_TABLE(virtio, rproc_serial_id_table);
-static unsigned int rproc_serial_features[] = {
+static const unsigned int rproc_serial_features[] = {
};
#ifdef CONFIG_PM_SLEEP
diff --git a/drivers/firmware/stratix10-rsu.c b/drivers/firmware/stratix10-rsu.c
index 4379475c99ed..9378075d04e9 100644
--- a/drivers/firmware/stratix10-rsu.c
+++ b/drivers/firmware/stratix10-rsu.c
@@ -20,10 +20,16 @@
#define RSU_VERSION_MASK GENMASK_ULL(63, 32)
#define RSU_ERROR_LOCATION_MASK GENMASK_ULL(31, 0)
#define RSU_ERROR_DETAIL_MASK GENMASK_ULL(63, 32)
+#define RSU_DCMF0_MASK GENMASK_ULL(31, 0)
+#define RSU_DCMF1_MASK GENMASK_ULL(63, 32)
+#define RSU_DCMF2_MASK GENMASK_ULL(31, 0)
+#define RSU_DCMF3_MASK GENMASK_ULL(63, 32)
#define RSU_TIMEOUT (msecs_to_jiffies(SVC_RSU_REQUEST_TIMEOUT_MS))
-#define INVALID_RETRY_COUNTER 0xFFFFFFFF
+#define INVALID_RETRY_COUNTER 0xFF
+#define INVALID_DCMF_VERSION 0xFF
+
typedef void (*rsu_callback)(struct stratix10_svc_client *client,
struct stratix10_svc_cb_data *data);
@@ -35,11 +41,16 @@ typedef void (*rsu_callback)(struct stratix10_svc_client *client,
* @lock: a mutex to protect callback completion state
* @status.current_image: address of image currently running in flash
* @status.fail_image: address of failed image in flash
- * @status.version: the version number of RSU firmware
+ * @status.version: the interface version number of RSU firmware
* @status.state: the state of RSU system
* @status.error_details: error code
* @status.error_location: the error offset inside the image that failed
+ * @dcmf_version.dcmf0: Quartus dcmf0 version
+ * @dcmf_version.dcmf1: Quartus dcmf1 version
+ * @dcmf_version.dcmf2: Quartus dcmf2 version
+ * @dcmf_version.dcmf3: Quartus dcmf3 version
* @retry_counter: the current image's retry counter
+ * @max_retry: the preset max retry value
*/
struct stratix10_rsu_priv {
struct stratix10_svc_chan *chan;
@@ -54,7 +65,16 @@ struct stratix10_rsu_priv {
unsigned int error_details;
unsigned int error_location;
} status;
+
+ struct {
+ unsigned int dcmf0;
+ unsigned int dcmf1;
+ unsigned int dcmf2;
+ unsigned int dcmf3;
+ } dcmf_version;
+
unsigned int retry_counter;
+ unsigned int max_retry;
};
/**
@@ -109,7 +129,7 @@ static void rsu_command_callback(struct stratix10_svc_client *client,
struct stratix10_rsu_priv *priv = client->priv;
if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
- dev_warn(client->dev, "Secure FW doesn't support notify\n");
+ dev_warn(client->dev, "FW doesn't support notify\n");
else if (data->status == BIT(SVC_STATUS_ERROR))
dev_err(client->dev, "Failure, returned status is %lu\n",
BIT(data->status));
@@ -119,7 +139,7 @@ static void rsu_command_callback(struct stratix10_svc_client *client,
/**
* rsu_retry_callback() - Callback from Intel service layer for getting
- * the current image's retry counter from firmware
+ * the current image's retry counter from the firmware
* @client: pointer to client
* @data: pointer to callback data structure
*
@@ -136,7 +156,7 @@ static void rsu_retry_callback(struct stratix10_svc_client *client,
if (data->status == BIT(SVC_STATUS_OK))
priv->retry_counter = *counter;
else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
- dev_warn(client->dev, "Secure FW doesn't support retry\n");
+ dev_warn(client->dev, "FW doesn't support retry\n");
else
dev_err(client->dev, "Failed to get retry counter %lu\n",
BIT(data->status));
@@ -145,6 +165,57 @@ static void rsu_retry_callback(struct stratix10_svc_client *client,
}
/**
+ * rsu_max_retry_callback() - Callback from Intel service layer for getting
+ * the max retry value from the firmware
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for max retry.
+ */
+static void rsu_max_retry_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+ unsigned int *max_retry = (unsigned int *)data->kaddr1;
+
+ if (data->status == BIT(SVC_STATUS_OK))
+ priv->max_retry = *max_retry;
+ else if (data->status == BIT(SVC_STATUS_NO_SUPPORT))
+ dev_warn(client->dev, "FW doesn't support max retry\n");
+ else
+ dev_err(client->dev, "Failed to get max retry %lu\n",
+ BIT(data->status));
+
+ complete(&priv->completion);
+}
+
+/**
+ * rsu_dcmf_version_callback() - Callback from Intel service layer for getting
+ * the DCMF version
+ * @client: pointer to client
+ * @data: pointer to callback data structure
+ *
+ * Callback from Intel service layer for DCMF version number
+ */
+static void rsu_dcmf_version_callback(struct stratix10_svc_client *client,
+ struct stratix10_svc_cb_data *data)
+{
+ struct stratix10_rsu_priv *priv = client->priv;
+ unsigned long long *value1 = (unsigned long long *)data->kaddr1;
+ unsigned long long *value2 = (unsigned long long *)data->kaddr2;
+
+ if (data->status == BIT(SVC_STATUS_OK)) {
+ priv->dcmf_version.dcmf0 = FIELD_GET(RSU_DCMF0_MASK, *value1);
+ priv->dcmf_version.dcmf1 = FIELD_GET(RSU_DCMF1_MASK, *value1);
+ priv->dcmf_version.dcmf2 = FIELD_GET(RSU_DCMF2_MASK, *value2);
+ priv->dcmf_version.dcmf3 = FIELD_GET(RSU_DCMF3_MASK, *value2);
+ } else
+ dev_err(client->dev, "failed to get DCMF version\n");
+
+ complete(&priv->completion);
+}
+
+/**
* rsu_send_msg() - send a message to Intel service layer
* @priv: pointer to rsu private data
* @command: RSU status or update command
@@ -282,6 +353,61 @@ static ssize_t retry_counter_show(struct device *dev,
return sprintf(buf, "0x%08x\n", priv->retry_counter);
}
+static ssize_t max_retry_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->max_retry);
+}
+
+static ssize_t dcmf0_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf0);
+}
+
+static ssize_t dcmf1_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf1);
+}
+
+static ssize_t dcmf2_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf2);
+}
+
+static ssize_t dcmf3_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct stratix10_rsu_priv *priv = dev_get_drvdata(dev);
+
+ if (!priv)
+ return -ENODEV;
+
+ return sprintf(buf, "0x%08x\n", priv->dcmf_version.dcmf3);
+}
+
static ssize_t reboot_image_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t count)
@@ -290,7 +416,7 @@ static ssize_t reboot_image_store(struct device *dev,
unsigned long address;
int ret;
- if (priv == 0)
+ if (!priv)
return -ENODEV;
ret = kstrtoul(buf, 0, &address);
@@ -315,7 +441,7 @@ static ssize_t notify_store(struct device *dev,
unsigned long status;
int ret;
- if (priv == 0)
+ if (!priv)
return -ENODEV;
ret = kstrtoul(buf, 0, &status);
@@ -353,6 +479,11 @@ static DEVICE_ATTR_RO(version);
static DEVICE_ATTR_RO(error_location);
static DEVICE_ATTR_RO(error_details);
static DEVICE_ATTR_RO(retry_counter);
+static DEVICE_ATTR_RO(max_retry);
+static DEVICE_ATTR_RO(dcmf0);
+static DEVICE_ATTR_RO(dcmf1);
+static DEVICE_ATTR_RO(dcmf2);
+static DEVICE_ATTR_RO(dcmf3);
static DEVICE_ATTR_WO(reboot_image);
static DEVICE_ATTR_WO(notify);
@@ -364,6 +495,11 @@ static struct attribute *rsu_attrs[] = {
&dev_attr_error_location.attr,
&dev_attr_error_details.attr,
&dev_attr_retry_counter.attr,
+ &dev_attr_max_retry.attr,
+ &dev_attr_dcmf0.attr,
+ &dev_attr_dcmf1.attr,
+ &dev_attr_dcmf2.attr,
+ &dev_attr_dcmf3.attr,
&dev_attr_reboot_image.attr,
&dev_attr_notify.attr,
NULL
@@ -391,6 +527,11 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
priv->status.version = 0;
priv->status.state = 0;
priv->retry_counter = INVALID_RETRY_COUNTER;
+ priv->dcmf_version.dcmf0 = INVALID_DCMF_VERSION;
+ priv->dcmf_version.dcmf1 = INVALID_DCMF_VERSION;
+ priv->dcmf_version.dcmf2 = INVALID_DCMF_VERSION;
+ priv->dcmf_version.dcmf3 = INVALID_DCMF_VERSION;
+ priv->max_retry = INVALID_RETRY_COUNTER;
mutex_init(&priv->lock);
priv->chan = stratix10_svc_request_channel_byname(&priv->client,
@@ -412,12 +553,27 @@ static int stratix10_rsu_probe(struct platform_device *pdev)
stratix10_svc_free_channel(priv->chan);
}
+ /* get DCMF version from firmware */
+ ret = rsu_send_msg(priv, COMMAND_RSU_DCMF_VERSION,
+ 0, rsu_dcmf_version_callback);
+ if (ret) {
+ dev_err(dev, "Error, getting DCMF version %i\n", ret);
+ stratix10_svc_free_channel(priv->chan);
+ }
+
ret = rsu_send_msg(priv, COMMAND_RSU_RETRY, 0, rsu_retry_callback);
if (ret) {
dev_err(dev, "Error, getting RSU retry %i\n", ret);
stratix10_svc_free_channel(priv->chan);
}
+ ret = rsu_send_msg(priv, COMMAND_RSU_MAX_RETRY, 0,
+ rsu_max_retry_callback);
+ if (ret) {
+ dev_err(dev, "Error, getting RSU max retry %i\n", ret);
+ stratix10_svc_free_channel(priv->chan);
+ }
+
return ret;
}
diff --git a/drivers/firmware/stratix10-svc.c b/drivers/firmware/stratix10-svc.c
index e0db8dbfc9d1..3aa489dba30a 100644
--- a/drivers/firmware/stratix10-svc.c
+++ b/drivers/firmware/stratix10-svc.c
@@ -305,9 +305,15 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,
cb_data->status = BIT(SVC_STATUS_COMPLETED);
break;
case COMMAND_RSU_RETRY:
+ case COMMAND_RSU_MAX_RETRY:
cb_data->status = BIT(SVC_STATUS_OK);
cb_data->kaddr1 = &res.a1;
break;
+ case COMMAND_RSU_DCMF_VERSION:
+ cb_data->status = BIT(SVC_STATUS_OK);
+ cb_data->kaddr1 = &res.a1;
+ cb_data->kaddr2 = &res.a2;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -406,6 +412,16 @@ static int svc_normal_to_secure_thread(void *data)
a1 = 0;
a2 = 0;
break;
+ case COMMAND_RSU_MAX_RETRY:
+ a0 = INTEL_SIP_SMC_RSU_MAX_RETRY;
+ a1 = 0;
+ a2 = 0;
+ break;
+ case COMMAND_RSU_DCMF_VERSION:
+ a0 = INTEL_SIP_SMC_RSU_DCMF_VERSION;
+ a1 = 0;
+ a2 = 0;
+ break;
default:
pr_warn("it shouldn't happen\n");
break;
@@ -474,6 +490,7 @@ static int svc_normal_to_secure_thread(void *data)
* doesn't support RSU notify or retry
*/
if ((pdata->command == COMMAND_RSU_RETRY) ||
+ (pdata->command == COMMAND_RSU_MAX_RETRY) ||
(pdata->command == COMMAND_RSU_NOTIFY)) {
cbdata->status =
BIT(SVC_STATUS_NO_SUPPORT);
diff --git a/drivers/fpga/dfl-afu-dma-region.c b/drivers/fpga/dfl-afu-dma-region.c
index 02d8cbad1ae2..02b60fde0430 100644
--- a/drivers/fpga/dfl-afu-dma-region.c
+++ b/drivers/fpga/dfl-afu-dma-region.c
@@ -16,15 +16,6 @@
#include "dfl-afu.h"
-static void put_all_pages(struct page **pages, int npages)
-{
- int i;
-
- for (i = 0; i < npages; i++)
- if (pages[i])
- put_page(pages[i]);
-}
-
void afu_dma_region_init(struct dfl_feature_platform_data *pdata)
{
struct dfl_afu *afu = dfl_fpga_pdata_get_private(pdata);
@@ -57,22 +48,22 @@ static int afu_dma_pin_pages(struct dfl_feature_platform_data *pdata,
goto unlock_vm;
}
- pinned = get_user_pages_fast(region->user_addr, npages, FOLL_WRITE,
+ pinned = pin_user_pages_fast(region->user_addr, npages, FOLL_WRITE,
region->pages);
if (pinned < 0) {
ret = pinned;
goto free_pages;
} else if (pinned != npages) {
ret = -EFAULT;
- goto put_pages;
+ goto unpin_pages;
}
dev_dbg(dev, "%d pages pinned\n", pinned);
return 0;
-put_pages:
- put_all_pages(region->pages, pinned);
+unpin_pages:
+ unpin_user_pages(region->pages, pinned);
free_pages:
kfree(region->pages);
unlock_vm:
@@ -94,7 +85,7 @@ static void afu_dma_unpin_pages(struct dfl_feature_platform_data *pdata,
long npages = region->length >> PAGE_SHIFT;
struct device *dev = &pdata->dev->dev;
- put_all_pages(region->pages, npages);
+ unpin_user_pages(region->pages, npages);
kfree(region->pages);
account_locked_vm(current->mm, npages, false);
diff --git a/drivers/fpga/dfl-afu-error.c b/drivers/fpga/dfl-afu-error.c
index c1467ae1a6b6..c4691187cca9 100644
--- a/drivers/fpga/dfl-afu-error.c
+++ b/drivers/fpga/dfl-afu-error.c
@@ -14,6 +14,7 @@
* Mitchel Henry <henry.mitchel@intel.com>
*/
+#include <linux/fpga-dfl.h>
#include <linux/uaccess.h>
#include "dfl-afu.h"
@@ -219,6 +220,21 @@ static void port_err_uinit(struct platform_device *pdev,
afu_port_err_mask(&pdev->dev, true);
}
+static long
+port_err_ioctl(struct platform_device *pdev, struct dfl_feature *feature,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case DFL_FPGA_PORT_ERR_GET_IRQ_NUM:
+ return dfl_feature_ioctl_get_num_irqs(pdev, feature, arg);
+ case DFL_FPGA_PORT_ERR_SET_IRQ:
+ return dfl_feature_ioctl_set_irq(pdev, feature, arg);
+ default:
+ dev_dbg(&pdev->dev, "%x cmd not handled", cmd);
+ return -ENODEV;
+ }
+}
+
const struct dfl_feature_id port_err_id_table[] = {
{.id = PORT_FEATURE_ID_ERROR,},
{0,}
@@ -227,4 +243,5 @@ const struct dfl_feature_id port_err_id_table[] = {
const struct dfl_feature_ops port_err_ops = {
.init = port_err_init,
.uinit = port_err_uinit,
+ .ioctl = port_err_ioctl,
};
diff --git a/drivers/fpga/dfl-afu-main.c b/drivers/fpga/dfl-afu-main.c
index 3fa2c5992173..753cda4b2568 100644
--- a/drivers/fpga/dfl-afu-main.c
+++ b/drivers/fpga/dfl-afu-main.c
@@ -530,6 +530,30 @@ static const struct dfl_feature_ops port_stp_ops = {
.init = port_stp_init,
};
+static long
+port_uint_ioctl(struct platform_device *pdev, struct dfl_feature *feature,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case DFL_FPGA_PORT_UINT_GET_IRQ_NUM:
+ return dfl_feature_ioctl_get_num_irqs(pdev, feature, arg);
+ case DFL_FPGA_PORT_UINT_SET_IRQ:
+ return dfl_feature_ioctl_set_irq(pdev, feature, arg);
+ default:
+ dev_dbg(&pdev->dev, "%x cmd not handled", cmd);
+ return -ENODEV;
+ }
+}
+
+static const struct dfl_feature_id port_uint_id_table[] = {
+ {.id = PORT_FEATURE_ID_UINT,},
+ {0,}
+};
+
+static const struct dfl_feature_ops port_uint_ops = {
+ .ioctl = port_uint_ioctl,
+};
+
static struct dfl_feature_driver port_feature_drvs[] = {
{
.id_table = port_hdr_id_table,
@@ -548,6 +572,10 @@ static struct dfl_feature_driver port_feature_drvs[] = {
.ops = &port_stp_ops,
},
{
+ .id_table = port_uint_id_table,
+ .ops = &port_uint_ops,
+ },
+ {
.ops = NULL,
}
};
@@ -578,6 +606,7 @@ static int afu_release(struct inode *inode, struct file *filp)
{
struct platform_device *pdev = filp->private_data;
struct dfl_feature_platform_data *pdata;
+ struct dfl_feature *feature;
dev_dbg(&pdev->dev, "Device File Release\n");
@@ -587,6 +616,9 @@ static int afu_release(struct inode *inode, struct file *filp)
dfl_feature_dev_use_end(pdata);
if (!dfl_feature_dev_use_count(pdata)) {
+ dfl_fpga_dev_for_each_feature(pdata, feature)
+ dfl_fpga_set_irq_triggers(feature, 0,
+ feature->nr_irqs, NULL);
__port_reset(pdev);
afu_dma_region_destroy(pdata);
}
diff --git a/drivers/fpga/dfl-fme-error.c b/drivers/fpga/dfl-fme-error.c
index f897d414b923..51c2892ec06d 100644
--- a/drivers/fpga/dfl-fme-error.c
+++ b/drivers/fpga/dfl-fme-error.c
@@ -15,6 +15,7 @@
* Mitchel, Henry <henry.mitchel@intel.com>
*/
+#include <linux/fpga-dfl.h>
#include <linux/uaccess.h>
#include "dfl.h"
@@ -348,6 +349,22 @@ static void fme_global_err_uinit(struct platform_device *pdev,
fme_err_mask(&pdev->dev, true);
}
+static long
+fme_global_error_ioctl(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned int cmd, unsigned long arg)
+{
+ switch (cmd) {
+ case DFL_FPGA_FME_ERR_GET_IRQ_NUM:
+ return dfl_feature_ioctl_get_num_irqs(pdev, feature, arg);
+ case DFL_FPGA_FME_ERR_SET_IRQ:
+ return dfl_feature_ioctl_set_irq(pdev, feature, arg);
+ default:
+ dev_dbg(&pdev->dev, "%x cmd not handled", cmd);
+ return -ENODEV;
+ }
+}
+
const struct dfl_feature_id fme_global_err_id_table[] = {
{.id = FME_FEATURE_ID_GLOBAL_ERR,},
{0,}
@@ -356,4 +373,5 @@ const struct dfl_feature_id fme_global_err_id_table[] = {
const struct dfl_feature_ops fme_global_err_ops = {
.init = fme_global_err_init,
.uinit = fme_global_err_uinit,
+ .ioctl = fme_global_error_ioctl,
};
diff --git a/drivers/fpga/dfl-fme-main.c b/drivers/fpga/dfl-fme-main.c
index fc210d4e1863..77ea04d4edbe 100644
--- a/drivers/fpga/dfl-fme-main.c
+++ b/drivers/fpga/dfl-fme-main.c
@@ -620,11 +620,17 @@ static int fme_release(struct inode *inode, struct file *filp)
{
struct dfl_feature_platform_data *pdata = filp->private_data;
struct platform_device *pdev = pdata->dev;
+ struct dfl_feature *feature;
dev_dbg(&pdev->dev, "Device File Release\n");
mutex_lock(&pdata->lock);
dfl_feature_dev_use_end(pdata);
+
+ if (!dfl_feature_dev_use_count(pdata))
+ dfl_fpga_dev_for_each_feature(pdata, feature)
+ dfl_fpga_set_irq_triggers(feature, 0,
+ feature->nr_irqs, NULL);
mutex_unlock(&pdata->lock);
return 0;
diff --git a/drivers/fpga/dfl-pci.c b/drivers/fpga/dfl-pci.c
index a78c409bf2c4..e220bec2927d 100644
--- a/drivers/fpga/dfl-pci.c
+++ b/drivers/fpga/dfl-pci.c
@@ -39,10 +39,32 @@ static void __iomem *cci_pci_ioremap_bar(struct pci_dev *pcidev, int bar)
return pcim_iomap_table(pcidev)[bar];
}
+static int cci_pci_alloc_irq(struct pci_dev *pcidev)
+{
+ int ret, nvec = pci_msix_vec_count(pcidev);
+
+ if (nvec <= 0) {
+ dev_dbg(&pcidev->dev, "fpga interrupt not supported\n");
+ return 0;
+ }
+
+ ret = pci_alloc_irq_vectors(pcidev, nvec, nvec, PCI_IRQ_MSIX);
+ if (ret < 0)
+ return ret;
+
+ return nvec;
+}
+
+static void cci_pci_free_irq(struct pci_dev *pcidev)
+{
+ pci_free_irq_vectors(pcidev);
+}
+
/* PCI Device ID */
#define PCIE_DEVICE_ID_PF_INT_5_X 0xBCBD
#define PCIE_DEVICE_ID_PF_INT_6_X 0xBCC0
#define PCIE_DEVICE_ID_PF_DSC_1_X 0x09C4
+#define PCIE_DEVICE_ID_INTEL_PAC_N3000 0x0B30
/* VF Device */
#define PCIE_DEVICE_ID_VF_INT_5_X 0xBCBF
#define PCIE_DEVICE_ID_VF_INT_6_X 0xBCC1
@@ -55,6 +77,7 @@ static struct pci_device_id cci_pcie_id_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_VF_INT_6_X),},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_PF_DSC_1_X),},
{PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_VF_DSC_1_X),},
+ {PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCIE_DEVICE_ID_INTEL_PAC_N3000),},
{0,}
};
MODULE_DEVICE_TABLE(pci, cci_pcie_id_tbl);
@@ -78,17 +101,34 @@ static void cci_remove_feature_devs(struct pci_dev *pcidev)
/* remove all children feature devices */
dfl_fpga_feature_devs_remove(drvdata->cdev);
+ cci_pci_free_irq(pcidev);
+}
+
+static int *cci_pci_create_irq_table(struct pci_dev *pcidev, unsigned int nvec)
+{
+ unsigned int i;
+ int *table;
+
+ table = kcalloc(nvec, sizeof(int), GFP_KERNEL);
+ if (!table)
+ return table;
+
+ for (i = 0; i < nvec; i++)
+ table[i] = pci_irq_vector(pcidev, i);
+
+ return table;
}
/* enumerate feature devices under pci device */
static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
{
struct cci_drvdata *drvdata = pci_get_drvdata(pcidev);
+ int port_num, bar, i, nvec, ret = 0;
struct dfl_fpga_enum_info *info;
struct dfl_fpga_cdev *cdev;
resource_size_t start, len;
- int port_num, bar, i, ret = 0;
void __iomem *base;
+ int *irq_table;
u32 offset;
u64 v;
@@ -97,11 +137,30 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
if (!info)
return -ENOMEM;
+ /* add irq info for enumeration if the device support irq */
+ nvec = cci_pci_alloc_irq(pcidev);
+ if (nvec < 0) {
+ dev_err(&pcidev->dev, "Fail to alloc irq %d.\n", nvec);
+ ret = nvec;
+ goto enum_info_free_exit;
+ } else if (nvec) {
+ irq_table = cci_pci_create_irq_table(pcidev, nvec);
+ if (!irq_table) {
+ ret = -ENOMEM;
+ goto irq_free_exit;
+ }
+
+ ret = dfl_fpga_enum_info_add_irq(info, nvec, irq_table);
+ kfree(irq_table);
+ if (ret)
+ goto irq_free_exit;
+ }
+
/* start to find Device Feature List from Bar 0 */
base = cci_pci_ioremap_bar(pcidev, 0);
if (!base) {
ret = -ENOMEM;
- goto enum_info_free_exit;
+ goto irq_free_exit;
}
/*
@@ -154,7 +213,7 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
dfl_fpga_enum_info_add_dfl(info, start, len, base);
} else {
ret = -ENODEV;
- goto enum_info_free_exit;
+ goto irq_free_exit;
}
/* start enumeration with prepared enumeration information */
@@ -162,11 +221,14 @@ static int cci_enumerate_feature_devs(struct pci_dev *pcidev)
if (IS_ERR(cdev)) {
dev_err(&pcidev->dev, "Enumeration failure\n");
ret = PTR_ERR(cdev);
- goto enum_info_free_exit;
+ goto irq_free_exit;
}
drvdata->cdev = cdev;
+irq_free_exit:
+ if (ret)
+ cci_pci_free_irq(pcidev);
enum_info_free_exit:
dfl_fpga_enum_info_free(info);
@@ -211,12 +273,10 @@ int cci_pci_probe(struct pci_dev *pcidev, const struct pci_device_id *pcidevid)
}
ret = cci_enumerate_feature_devs(pcidev);
- if (ret) {
- dev_err(&pcidev->dev, "enumeration failure %d.\n", ret);
- goto disable_error_report_exit;
- }
+ if (!ret)
+ return ret;
- return ret;
+ dev_err(&pcidev->dev, "enumeration failure %d.\n", ret);
disable_error_report_exit:
pci_disable_pcie_error_reporting(pcidev);
diff --git a/drivers/fpga/dfl.c b/drivers/fpga/dfl.c
index 990994874bf1..649958a36e62 100644
--- a/drivers/fpga/dfl.c
+++ b/drivers/fpga/dfl.c
@@ -10,7 +10,9 @@
* Wu Hao <hao.wu@intel.com>
* Xiao Guangrong <guangrong.xiao@linux.intel.com>
*/
+#include <linux/fpga-dfl.h>
#include <linux/module.h>
+#include <linux/uaccess.h>
#include "dfl.h"
@@ -421,6 +423,9 @@ EXPORT_SYMBOL_GPL(dfl_fpga_dev_ops_unregister);
*
* @dev: device to enumerate.
* @cdev: the container device for all feature devices.
+ * @nr_irqs: number of irqs for all feature devices.
+ * @irq_table: Linux IRQ numbers for all irqs, indexed by local irq index of
+ * this device.
* @feature_dev: current feature device.
* @ioaddr: header register region address of feature device in enumeration.
* @sub_features: a sub features linked list for feature device in enumeration.
@@ -429,6 +434,9 @@ EXPORT_SYMBOL_GPL(dfl_fpga_dev_ops_unregister);
struct build_feature_devs_info {
struct device *dev;
struct dfl_fpga_cdev *cdev;
+ unsigned int nr_irqs;
+ int *irq_table;
+
struct platform_device *feature_dev;
void __iomem *ioaddr;
struct list_head sub_features;
@@ -442,12 +450,16 @@ struct build_feature_devs_info {
* @mmio_res: mmio resource of this sub feature.
* @ioaddr: mapped base address of mmio resource.
* @node: node in sub_features linked list.
+ * @irq_base: start of irq index in this sub feature.
+ * @nr_irqs: number of irqs of this sub feature.
*/
struct dfl_feature_info {
u64 fid;
struct resource mmio_res;
void __iomem *ioaddr;
struct list_head node;
+ unsigned int irq_base;
+ unsigned int nr_irqs;
};
static void dfl_fpga_cdev_add_port_dev(struct dfl_fpga_cdev *cdev,
@@ -487,8 +499,7 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
* it will be automatically freed by device's release() callback,
* platform_device_release().
*/
- pdata = kzalloc(dfl_feature_platform_data_size(binfo->feature_num),
- GFP_KERNEL);
+ pdata = kzalloc(struct_size(pdata, features, binfo->feature_num), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
@@ -520,13 +531,30 @@ static int build_info_commit_dev(struct build_feature_devs_info *binfo)
/* fill features and resource information for feature dev */
list_for_each_entry_safe(finfo, p, &binfo->sub_features, node) {
struct dfl_feature *feature = &pdata->features[index];
+ struct dfl_feature_irq_ctx *ctx;
+ unsigned int i;
/* save resource information for each feature */
+ feature->dev = fdev;
feature->id = finfo->fid;
feature->resource_index = index;
feature->ioaddr = finfo->ioaddr;
fdev->resource[index++] = finfo->mmio_res;
+ if (finfo->nr_irqs) {
+ ctx = devm_kcalloc(binfo->dev, finfo->nr_irqs,
+ sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ for (i = 0; i < finfo->nr_irqs; i++)
+ ctx[i].irq =
+ binfo->irq_table[finfo->irq_base + i];
+
+ feature->irq_ctx = ctx;
+ feature->nr_irqs = finfo->nr_irqs;
+ }
+
list_del(&finfo->node);
kfree(finfo);
}
@@ -638,6 +666,78 @@ static u64 feature_id(void __iomem *start)
return 0;
}
+static int parse_feature_irqs(struct build_feature_devs_info *binfo,
+ resource_size_t ofst, u64 fid,
+ unsigned int *irq_base, unsigned int *nr_irqs)
+{
+ void __iomem *base = binfo->ioaddr + ofst;
+ unsigned int i, ibase, inr = 0;
+ int virq;
+ u64 v;
+
+ /*
+ * Ideally DFL framework should only read info from DFL header, but
+ * current version DFL only provides mmio resources information for
+ * each feature in DFL Header, no field for interrupt resources.
+ * Interrupt resource information is provided by specific mmio
+ * registers of each private feature which supports interrupt. So in
+ * order to parse and assign irq resources, DFL framework has to look
+ * into specific capability registers of these private features.
+ *
+ * Once future DFL version supports generic interrupt resource
+ * information in common DFL headers, the generic interrupt parsing
+ * code will be added. But in order to be compatible to old version
+ * DFL, the driver may still fall back to these quirks.
+ */
+ switch (fid) {
+ case PORT_FEATURE_ID_UINT:
+ v = readq(base + PORT_UINT_CAP);
+ ibase = FIELD_GET(PORT_UINT_CAP_FST_VECT, v);
+ inr = FIELD_GET(PORT_UINT_CAP_INT_NUM, v);
+ break;
+ case PORT_FEATURE_ID_ERROR:
+ v = readq(base + PORT_ERROR_CAP);
+ ibase = FIELD_GET(PORT_ERROR_CAP_INT_VECT, v);
+ inr = FIELD_GET(PORT_ERROR_CAP_SUPP_INT, v);
+ break;
+ case FME_FEATURE_ID_GLOBAL_ERR:
+ v = readq(base + FME_ERROR_CAP);
+ ibase = FIELD_GET(FME_ERROR_CAP_INT_VECT, v);
+ inr = FIELD_GET(FME_ERROR_CAP_SUPP_INT, v);
+ break;
+ }
+
+ if (!inr) {
+ *irq_base = 0;
+ *nr_irqs = 0;
+ return 0;
+ }
+
+ dev_dbg(binfo->dev, "feature: 0x%llx, irq_base: %u, nr_irqs: %u\n",
+ fid, ibase, inr);
+
+ if (ibase + inr > binfo->nr_irqs) {
+ dev_err(binfo->dev,
+ "Invalid interrupt number in feature 0x%llx\n", fid);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < inr; i++) {
+ virq = binfo->irq_table[ibase + i];
+ if (virq < 0 || virq > NR_IRQS) {
+ dev_err(binfo->dev,
+ "Invalid irq table entry for feature 0x%llx\n",
+ fid);
+ return -EINVAL;
+ }
+ }
+
+ *irq_base = ibase;
+ *nr_irqs = inr;
+
+ return 0;
+}
+
/*
* when create sub feature instances, for private features, it doesn't need
* to provide resource size and feature id as they could be read from DFH
@@ -650,7 +750,9 @@ create_feature_instance(struct build_feature_devs_info *binfo,
struct dfl_fpga_enum_dfl *dfl, resource_size_t ofst,
resource_size_t size, u64 fid)
{
+ unsigned int irq_base, nr_irqs;
struct dfl_feature_info *finfo;
+ int ret;
/* read feature size and id if inputs are invalid */
size = size ? size : feature_size(dfl->ioaddr + ofst);
@@ -659,6 +761,10 @@ create_feature_instance(struct build_feature_devs_info *binfo,
if (dfl->len - ofst < size)
return -EINVAL;
+ ret = parse_feature_irqs(binfo, ofst, fid, &irq_base, &nr_irqs);
+ if (ret)
+ return ret;
+
finfo = kzalloc(sizeof(*finfo), GFP_KERNEL);
if (!finfo)
return -ENOMEM;
@@ -667,6 +773,8 @@ create_feature_instance(struct build_feature_devs_info *binfo,
finfo->mmio_res.start = dfl->start + ofst;
finfo->mmio_res.end = finfo->mmio_res.start + size - 1;
finfo->mmio_res.flags = IORESOURCE_MEM;
+ finfo->irq_base = irq_base;
+ finfo->nr_irqs = nr_irqs;
finfo->ioaddr = dfl->ioaddr + ofst;
list_add_tail(&finfo->node, &binfo->sub_features);
@@ -853,6 +961,10 @@ void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info)
devm_kfree(dev, dfl);
}
+ /* remove irq table */
+ if (info->irq_table)
+ devm_kfree(dev, info->irq_table);
+
devm_kfree(dev, info);
put_device(dev);
}
@@ -892,6 +1004,45 @@ int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
}
EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_add_dfl);
+/**
+ * dfl_fpga_enum_info_add_irq - add irq table to enum info
+ *
+ * @info: ptr to dfl_fpga_enum_info
+ * @nr_irqs: number of irqs of the DFL fpga device to be enumerated.
+ * @irq_table: Linux IRQ numbers for all irqs, indexed by local irq index of
+ * this device.
+ *
+ * One FPGA device may have several interrupts. This function adds irq
+ * information of the DFL fpga device to enum info for next step enumeration.
+ * This function should be called before dfl_fpga_feature_devs_enumerate().
+ * As we only support one irq domain for all DFLs in the same enum info, adding
+ * irq table a second time for the same enum info will return error.
+ *
+ * If we need to enumerate DFLs which belong to different irq domains, we
+ * should fill more enum info and enumerate them one by one.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int dfl_fpga_enum_info_add_irq(struct dfl_fpga_enum_info *info,
+ unsigned int nr_irqs, int *irq_table)
+{
+ if (!nr_irqs || !irq_table)
+ return -EINVAL;
+
+ if (info->irq_table)
+ return -EEXIST;
+
+ info->irq_table = devm_kmemdup(info->dev, irq_table,
+ sizeof(int) * nr_irqs, GFP_KERNEL);
+ if (!info->irq_table)
+ return -ENOMEM;
+
+ info->nr_irqs = nr_irqs;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_enum_info_add_irq);
+
static int remove_feature_dev(struct device *dev, void *data)
{
struct platform_device *pdev = to_platform_device(dev);
@@ -959,6 +1110,10 @@ dfl_fpga_feature_devs_enumerate(struct dfl_fpga_enum_info *info)
binfo->dev = info->dev;
binfo->cdev = cdev;
+ binfo->nr_irqs = info->nr_irqs;
+ if (info->nr_irqs)
+ binfo->irq_table = info->irq_table;
+
/*
* start enumeration for all feature devices based on Device Feature
* Lists.
@@ -1241,6 +1396,160 @@ done:
}
EXPORT_SYMBOL_GPL(dfl_fpga_cdev_config_ports_vf);
+static irqreturn_t dfl_irq_handler(int irq, void *arg)
+{
+ struct eventfd_ctx *trigger = arg;
+
+ eventfd_signal(trigger, 1);
+ return IRQ_HANDLED;
+}
+
+static int do_set_irq_trigger(struct dfl_feature *feature, unsigned int idx,
+ int fd)
+{
+ struct platform_device *pdev = feature->dev;
+ struct eventfd_ctx *trigger;
+ int irq, ret;
+
+ irq = feature->irq_ctx[idx].irq;
+
+ if (feature->irq_ctx[idx].trigger) {
+ free_irq(irq, feature->irq_ctx[idx].trigger);
+ kfree(feature->irq_ctx[idx].name);
+ eventfd_ctx_put(feature->irq_ctx[idx].trigger);
+ feature->irq_ctx[idx].trigger = NULL;
+ }
+
+ if (fd < 0)
+ return 0;
+
+ feature->irq_ctx[idx].name =
+ kasprintf(GFP_KERNEL, "fpga-irq[%u](%s-%llx)", idx,
+ dev_name(&pdev->dev), feature->id);
+ if (!feature->irq_ctx[idx].name)
+ return -ENOMEM;
+
+ trigger = eventfd_ctx_fdget(fd);
+ if (IS_ERR(trigger)) {
+ ret = PTR_ERR(trigger);
+ goto free_name;
+ }
+
+ ret = request_irq(irq, dfl_irq_handler, 0,
+ feature->irq_ctx[idx].name, trigger);
+ if (!ret) {
+ feature->irq_ctx[idx].trigger = trigger;
+ return ret;
+ }
+
+ eventfd_ctx_put(trigger);
+free_name:
+ kfree(feature->irq_ctx[idx].name);
+
+ return ret;
+}
+
+/**
+ * dfl_fpga_set_irq_triggers - set eventfd triggers for dfl feature interrupts
+ *
+ * @feature: dfl sub feature.
+ * @start: start of irq index in this dfl sub feature.
+ * @count: number of irqs.
+ * @fds: eventfds to bind with irqs. unbind related irq if fds[n] is negative.
+ * unbind "count" specified number of irqs if fds ptr is NULL.
+ *
+ * Bind given eventfds with irqs in this dfl sub feature. Unbind related irq if
+ * fds[n] is negative. Unbind "count" specified number of irqs if fds ptr is
+ * NULL.
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+int dfl_fpga_set_irq_triggers(struct dfl_feature *feature, unsigned int start,
+ unsigned int count, int32_t *fds)
+{
+ unsigned int i;
+ int ret = 0;
+
+ /* overflow */
+ if (unlikely(start + count < start))
+ return -EINVAL;
+
+ /* exceeds nr_irqs */
+ if (start + count > feature->nr_irqs)
+ return -EINVAL;
+
+ for (i = 0; i < count; i++) {
+ int fd = fds ? fds[i] : -1;
+
+ ret = do_set_irq_trigger(feature, start + i, fd);
+ if (ret) {
+ while (i--)
+ do_set_irq_trigger(feature, start + i, -1);
+ break;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dfl_fpga_set_irq_triggers);
+
+/**
+ * dfl_feature_ioctl_get_num_irqs - dfl feature _GET_IRQ_NUM ioctl interface.
+ * @pdev: the feature device which has the sub feature
+ * @feature: the dfl sub feature
+ * @arg: ioctl argument
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+long dfl_feature_ioctl_get_num_irqs(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned long arg)
+{
+ return put_user(feature->nr_irqs, (__u32 __user *)arg);
+}
+EXPORT_SYMBOL_GPL(dfl_feature_ioctl_get_num_irqs);
+
+/**
+ * dfl_feature_ioctl_set_irq - dfl feature _SET_IRQ ioctl interface.
+ * @pdev: the feature device which has the sub feature
+ * @feature: the dfl sub feature
+ * @arg: ioctl argument
+ *
+ * Return: 0 on success, negative error code otherwise.
+ */
+long dfl_feature_ioctl_set_irq(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned long arg)
+{
+ struct dfl_feature_platform_data *pdata = dev_get_platdata(&pdev->dev);
+ struct dfl_fpga_irq_set hdr;
+ s32 *fds;
+ long ret;
+
+ if (!feature->nr_irqs)
+ return -ENOENT;
+
+ if (copy_from_user(&hdr, (void __user *)arg, sizeof(hdr)))
+ return -EFAULT;
+
+ if (!hdr.count || (hdr.start + hdr.count > feature->nr_irqs) ||
+ (hdr.start + hdr.count < hdr.start))
+ return -EINVAL;
+
+ fds = memdup_user((void __user *)(arg + sizeof(hdr)),
+ hdr.count * sizeof(s32));
+ if (IS_ERR(fds))
+ return PTR_ERR(fds);
+
+ mutex_lock(&pdata->lock);
+ ret = dfl_fpga_set_irq_triggers(feature, hdr.start, hdr.count, fds);
+ mutex_unlock(&pdata->lock);
+
+ kfree(fds);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(dfl_feature_ioctl_set_irq);
+
static void __exit dfl_fpga_exit(void)
{
dfl_chardev_uinit();
diff --git a/drivers/fpga/dfl.h b/drivers/fpga/dfl.h
index 2f5d3052e36e..a32dfba2a88b 100644
--- a/drivers/fpga/dfl.h
+++ b/drivers/fpga/dfl.h
@@ -17,7 +17,9 @@
#include <linux/bitfield.h>
#include <linux/cdev.h>
#include <linux/delay.h>
+#include <linux/eventfd.h>
#include <linux/fs.h>
+#include <linux/interrupt.h>
#include <linux/iopoll.h>
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/platform_device.h>
@@ -112,6 +114,13 @@
#define FME_PORT_OFST_ACC_VF 1
#define FME_PORT_OFST_IMP BIT_ULL(60)
+/* FME Error Capability Register */
+#define FME_ERROR_CAP 0x70
+
+/* FME Error Capability Register Bitfield */
+#define FME_ERROR_CAP_SUPP_INT BIT_ULL(0) /* Interrupt Support */
+#define FME_ERROR_CAP_INT_VECT GENMASK_ULL(12, 1) /* Interrupt vector */
+
/* PORT Header Register Set */
#define PORT_HDR_DFH DFH
#define PORT_HDR_GUID_L GUID_L
@@ -145,6 +154,20 @@
#define PORT_STS_PWR_STATE_AP2 2 /* 90% throttling */
#define PORT_STS_PWR_STATE_AP6 6 /* 100% throttling */
+/* Port Error Capability Register */
+#define PORT_ERROR_CAP 0x38
+
+/* Port Error Capability Register Bitfield */
+#define PORT_ERROR_CAP_SUPP_INT BIT_ULL(0) /* Interrupt Support */
+#define PORT_ERROR_CAP_INT_VECT GENMASK_ULL(12, 1) /* Interrupt vector */
+
+/* Port Uint Capability Register */
+#define PORT_UINT_CAP 0x8
+
+/* Port Uint Capability Register Bitfield */
+#define PORT_UINT_CAP_INT_NUM GENMASK_ULL(11, 0) /* Interrupts num */
+#define PORT_UINT_CAP_FST_VECT GENMASK_ULL(23, 12) /* First Vector */
+
/**
* struct dfl_fpga_port_ops - port ops
*
@@ -189,20 +212,39 @@ struct dfl_feature_driver {
};
/**
+ * struct dfl_feature_irq_ctx - dfl private feature interrupt context
+ *
+ * @irq: Linux IRQ number of this interrupt.
+ * @trigger: eventfd context to signal when interrupt happens.
+ * @name: irq name needed when requesting irq.
+ */
+struct dfl_feature_irq_ctx {
+ int irq;
+ struct eventfd_ctx *trigger;
+ char *name;
+};
+
+/**
* struct dfl_feature - sub feature of the feature devices
*
+ * @dev: ptr to pdev of the feature device which has the sub feature.
* @id: sub feature id.
* @resource_index: each sub feature has one mmio resource for its registers.
* this index is used to find its mmio resource from the
* feature dev (platform device)'s reources.
* @ioaddr: mapped mmio resource address.
+ * @irq_ctx: interrupt context list.
+ * @nr_irqs: number of interrupt contexts.
* @ops: ops of this sub feature.
* @priv: priv data of this feature.
*/
struct dfl_feature {
+ struct platform_device *dev;
u64 id;
int resource_index;
void __iomem *ioaddr;
+ struct dfl_feature_irq_ctx *irq_ctx;
+ unsigned int nr_irqs;
const struct dfl_feature_ops *ops;
void *priv;
};
@@ -299,12 +341,6 @@ struct dfl_feature_ops {
#define DFL_FPGA_FEATURE_DEV_FME "dfl-fme"
#define DFL_FPGA_FEATURE_DEV_PORT "dfl-port"
-static inline int dfl_feature_platform_data_size(const int num)
-{
- return sizeof(struct dfl_feature_platform_data) +
- num * sizeof(struct dfl_feature);
-}
-
void dfl_fpga_dev_feature_uinit(struct platform_device *pdev);
int dfl_fpga_dev_feature_init(struct platform_device *pdev,
struct dfl_feature_driver *feature_drvs);
@@ -390,10 +426,14 @@ static inline u8 dfl_feature_revision(void __iomem *base)
*
* @dev: parent device.
* @dfls: list of device feature lists.
+ * @nr_irqs: number of irqs for all feature devices.
+ * @irq_table: Linux IRQ numbers for all irqs, indexed by hw irq numbers.
*/
struct dfl_fpga_enum_info {
struct device *dev;
struct list_head dfls;
+ unsigned int nr_irqs;
+ int *irq_table;
};
/**
@@ -417,6 +457,8 @@ struct dfl_fpga_enum_info *dfl_fpga_enum_info_alloc(struct device *dev);
int dfl_fpga_enum_info_add_dfl(struct dfl_fpga_enum_info *info,
resource_size_t start, resource_size_t len,
void __iomem *ioaddr);
+int dfl_fpga_enum_info_add_irq(struct dfl_fpga_enum_info *info,
+ unsigned int nr_irqs, int *irq_table);
void dfl_fpga_enum_info_free(struct dfl_fpga_enum_info *info);
/**
@@ -468,4 +510,13 @@ int dfl_fpga_cdev_release_port(struct dfl_fpga_cdev *cdev, int port_id);
int dfl_fpga_cdev_assign_port(struct dfl_fpga_cdev *cdev, int port_id);
void dfl_fpga_cdev_config_ports_pf(struct dfl_fpga_cdev *cdev);
int dfl_fpga_cdev_config_ports_vf(struct dfl_fpga_cdev *cdev, int num_vf);
+int dfl_fpga_set_irq_triggers(struct dfl_feature *feature, unsigned int start,
+ unsigned int count, int32_t *fds);
+long dfl_feature_ioctl_get_num_irqs(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned long arg);
+long dfl_feature_ioctl_set_irq(struct platform_device *pdev,
+ struct dfl_feature *feature,
+ unsigned long arg);
+
#endif /* __FPGA_DFL_H */
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
index 4bab9028940a..2deccacc3aa7 100644
--- a/drivers/fpga/fpga-bridge.c
+++ b/drivers/fpga/fpga-bridge.c
@@ -328,7 +328,7 @@ struct fpga_bridge *fpga_bridge_create(struct device *dev, const char *name,
void *priv)
{
struct fpga_bridge *bridge;
- int id, ret = 0;
+ int id, ret;
if (!name || !strlen(name)) {
dev_err(dev, "Attempt to register with no name!\n");
@@ -340,10 +340,8 @@ struct fpga_bridge *fpga_bridge_create(struct device *dev, const char *name,
return NULL;
id = ida_simple_get(&fpga_bridge_ida, 0, 0, GFP_KERNEL);
- if (id < 0) {
- ret = id;
+ if (id < 0)
goto error_kfree;
- }
mutex_init(&bridge->mutex);
INIT_LIST_HEAD(&bridge->node);
diff --git a/drivers/fpga/fpga-mgr.c b/drivers/fpga/fpga-mgr.c
index e05104f5e40c..f38bab01432e 100644
--- a/drivers/fpga/fpga-mgr.c
+++ b/drivers/fpga/fpga-mgr.c
@@ -581,10 +581,8 @@ struct fpga_manager *fpga_mgr_create(struct device *dev, const char *name,
return NULL;
id = ida_simple_get(&fpga_mgr_ida, 0, 0, GFP_KERNEL);
- if (id < 0) {
- ret = id;
+ if (id < 0)
goto error_kfree;
- }
mutex_init(&mgr->ref_mutex);
diff --git a/drivers/fpga/xilinx-spi.c b/drivers/fpga/xilinx-spi.c
index 272ee0c22822..2967aa2a74e2 100644
--- a/drivers/fpga/xilinx-spi.c
+++ b/drivers/fpga/xilinx-spi.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Xilinx Spartan6 Slave Serial SPI Driver
+ * Xilinx Spartan6 and 7 Series Slave Serial SPI Driver
*
* Copyright (C) 2017 DENX Software Engineering
*
@@ -23,6 +23,7 @@
struct xilinx_spi_conf {
struct spi_device *spi;
struct gpio_desc *prog_b;
+ struct gpio_desc *init_b;
struct gpio_desc *done;
};
@@ -36,13 +37,45 @@ static enum fpga_mgr_states xilinx_spi_state(struct fpga_manager *mgr)
return FPGA_MGR_STATE_UNKNOWN;
}
+/**
+ * wait_for_init_b - wait for the INIT_B pin to have a given state, or wait
+ * a given delay if the pin is unavailable
+ *
+ * @mgr: The FPGA manager object
+ * @value: Value INIT_B to wait for (1 = asserted = low)
+ * @alt_udelay: Delay to wait if the INIT_B GPIO is not available
+ *
+ * Returns 0 when the INIT_B GPIO reached the given state or -ETIMEDOUT if
+ * too much time passed waiting for that. If no INIT_B GPIO is available
+ * then always return 0.
+ */
+static int wait_for_init_b(struct fpga_manager *mgr, int value,
+ unsigned long alt_udelay)
+{
+ struct xilinx_spi_conf *conf = mgr->priv;
+ unsigned long timeout = jiffies + msecs_to_jiffies(1000);
+
+ if (conf->init_b) {
+ while (time_before(jiffies, timeout)) {
+ /* dump_state(conf, "wait for init_d .."); */
+ if (gpiod_get_value(conf->init_b) == value)
+ return 0;
+ usleep_range(100, 400);
+ }
+ return -ETIMEDOUT;
+ }
+
+ udelay(alt_udelay);
+
+ return 0;
+}
+
static int xilinx_spi_write_init(struct fpga_manager *mgr,
struct fpga_image_info *info,
const char *buf, size_t count)
{
struct xilinx_spi_conf *conf = mgr->priv;
- const size_t prog_latency_7500us = 7500;
- const size_t prog_pulse_1us = 1;
+ int err;
if (info->flags & FPGA_MGR_PARTIAL_RECONFIG) {
dev_err(&mgr->dev, "Partial reconfiguration not supported.\n");
@@ -51,17 +84,28 @@ static int xilinx_spi_write_init(struct fpga_manager *mgr,
gpiod_set_value(conf->prog_b, 1);
- udelay(prog_pulse_1us); /* min is 500 ns */
+ err = wait_for_init_b(mgr, 1, 1); /* min is 500 ns */
+ if (err) {
+ dev_err(&mgr->dev, "INIT_B pin did not go low\n");
+ gpiod_set_value(conf->prog_b, 0);
+ return err;
+ }
gpiod_set_value(conf->prog_b, 0);
+ err = wait_for_init_b(mgr, 0, 0);
+ if (err) {
+ dev_err(&mgr->dev, "INIT_B pin did not go high\n");
+ return err;
+ }
+
if (gpiod_get_value(conf->done)) {
dev_err(&mgr->dev, "Unexpected DONE pin state...\n");
return -EIO;
}
/* program latency */
- usleep_range(prog_latency_7500us, prog_latency_7500us + 100);
+ usleep_range(7500, 7600);
return 0;
}
@@ -156,6 +200,13 @@ static int xilinx_spi_probe(struct spi_device *spi)
return PTR_ERR(conf->prog_b);
}
+ conf->init_b = devm_gpiod_get_optional(&spi->dev, "init-b", GPIOD_IN);
+ if (IS_ERR(conf->init_b)) {
+ dev_err(&spi->dev, "Failed to get INIT_B gpio: %ld\n",
+ PTR_ERR(conf->init_b));
+ return PTR_ERR(conf->init_b);
+ }
+
conf->done = devm_gpiod_get(&spi->dev, "done", GPIOD_IN);
if (IS_ERR(conf->done)) {
dev_err(&spi->dev, "Failed to get DONE gpio: %ld\n",
diff --git a/drivers/greybus/es2.c b/drivers/greybus/es2.c
index 366716f11b1a..1df6ab5d339d 100644
--- a/drivers/greybus/es2.c
+++ b/drivers/greybus/es2.c
@@ -759,7 +759,7 @@ static int check_urb_status(struct urb *urb)
case -EOVERFLOW:
dev_err(dev, "%s: overflow actual length is %d\n",
__func__, urb->actual_length);
- /* fall through */
+ fallthrough;
case -ECONNRESET:
case -ENOENT:
case -ESHUTDOWN:
diff --git a/drivers/greybus/interface.c b/drivers/greybus/interface.c
index 67dbe6fda9a1..58ea374d8aaa 100644
--- a/drivers/greybus/interface.c
+++ b/drivers/greybus/interface.c
@@ -1233,7 +1233,7 @@ int gb_interface_add(struct gb_interface *intf)
case GB_INTERFACE_TYPE_GREYBUS:
dev_info(&intf->dev, "GMP VID=0x%08x, PID=0x%08x\n",
intf->vendor_id, intf->product_id);
- /* fall-through */
+ fallthrough;
case GB_INTERFACE_TYPE_UNIPRO:
dev_info(&intf->dev, "DDBL1 Manufacturer=0x%08x, Product=0x%08x\n",
intf->ddbl1_manufacturer_id,
diff --git a/drivers/hwtracing/coresight/coresight-catu.c b/drivers/hwtracing/coresight/coresight-catu.c
index 16ebf38a9f66..1801804a7762 100644
--- a/drivers/hwtracing/coresight/coresight-catu.c
+++ b/drivers/hwtracing/coresight/coresight-catu.c
@@ -568,10 +568,7 @@ out:
}
static struct amba_id catu_ids[] = {
- {
- .id = 0x000bb9ee,
- .mask = 0x000fffff,
- },
+ CS_AMBA_ID(0x000bb9ee),
{},
};
diff --git a/drivers/hwtracing/coresight/coresight-etm-perf.c b/drivers/hwtracing/coresight/coresight-etm-perf.c
index 84f1dcb69827..1a3169e69bb1 100644
--- a/drivers/hwtracing/coresight/coresight-etm-perf.c
+++ b/drivers/hwtracing/coresight/coresight-etm-perf.c
@@ -226,9 +226,6 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
sink = coresight_get_enabled_sink(true);
}
- if (!sink)
- goto err;
-
mask = &event_data->mask;
/*
@@ -254,6 +251,16 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
}
/*
+ * No sink provided - look for a default sink for one of the
+ * devices. At present we only support topology where all CPUs
+ * use the same sink [N:1], so only need to find one sink. The
+ * coresight_build_path later will remove any CPU that does not
+ * attach to the sink, or if we have not found a sink.
+ */
+ if (!sink)
+ sink = coresight_find_default_sink(csdev);
+
+ /*
* Building a path doesn't enable it, it simply builds a
* list of devices from source to sink that can be
* referenced later when the path is actually needed.
@@ -267,6 +274,10 @@ static void *etm_setup_aux(struct perf_event *event, void **pages,
*etm_event_cpu_path_ptr(event_data, cpu) = path;
}
+ /* no sink found for any CPU - cannot trace */
+ if (!sink)
+ goto err;
+
/* If we don't have any CPUs ready for tracing, abort */
cpu = cpumask_first(mask);
if (cpu >= nr_cpu_ids)
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 0c35cd5e0d1d..6d7d2169bfb2 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -196,12 +196,14 @@ static int etm4_enable_hw(struct etmv4_drvdata *drvdata)
writel_relaxed(config->vmid_mask0, drvdata->base + TRCVMIDCCTLR0);
writel_relaxed(config->vmid_mask1, drvdata->base + TRCVMIDCCTLR1);
- /*
- * Request to keep the trace unit powered and also
- * emulation of powerdown
- */
- writel_relaxed(readl_relaxed(drvdata->base + TRCPDCR) | TRCPDCR_PU,
- drvdata->base + TRCPDCR);
+ if (!drvdata->skip_power_up) {
+ /*
+ * Request to keep the trace unit powered and also
+ * emulation of powerdown
+ */
+ writel_relaxed(readl_relaxed(drvdata->base + TRCPDCR) |
+ TRCPDCR_PU, drvdata->base + TRCPDCR);
+ }
/* Enable the trace unit */
writel_relaxed(1, drvdata->base + TRCPRGCTLR);
@@ -476,10 +478,12 @@ static void etm4_disable_hw(void *info)
CS_UNLOCK(drvdata->base);
- /* power can be removed from the trace unit now */
- control = readl_relaxed(drvdata->base + TRCPDCR);
- control &= ~TRCPDCR_PU;
- writel_relaxed(control, drvdata->base + TRCPDCR);
+ if (!drvdata->skip_power_up) {
+ /* power can be removed from the trace unit now */
+ control = readl_relaxed(drvdata->base + TRCPDCR);
+ control &= ~TRCPDCR_PU;
+ writel_relaxed(control, drvdata->base + TRCPDCR);
+ }
control = readl_relaxed(drvdata->base + TRCPRGCTLR);
@@ -507,6 +511,12 @@ static void etm4_disable_hw(void *info)
readl_relaxed(drvdata->base + TRCSSCSRn(i));
}
+ /* read back the current counter values */
+ for (i = 0; i < drvdata->nr_cntr; i++) {
+ config->cntr_val[i] =
+ readl_relaxed(drvdata->base + TRCCNTVRn(i));
+ }
+
coresight_disclaim_device_unlocked(drvdata->base);
CS_LOCK(drvdata->base);
@@ -1196,8 +1206,8 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
}
for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
- state->trcacvr[i] = readl(drvdata->base + TRCACVRn(i));
- state->trcacatr[i] = readl(drvdata->base + TRCACATRn(i));
+ state->trcacvr[i] = readq(drvdata->base + TRCACVRn(i));
+ state->trcacatr[i] = readq(drvdata->base + TRCACATRn(i));
}
/*
@@ -1208,10 +1218,10 @@ static int etm4_cpu_save(struct etmv4_drvdata *drvdata)
*/
for (i = 0; i < drvdata->numcidc; i++)
- state->trccidcvr[i] = readl(drvdata->base + TRCCIDCVRn(i));
+ state->trccidcvr[i] = readq(drvdata->base + TRCCIDCVRn(i));
for (i = 0; i < drvdata->numvmidc; i++)
- state->trcvmidcvr[i] = readl(drvdata->base + TRCVMIDCVRn(i));
+ state->trcvmidcvr[i] = readq(drvdata->base + TRCVMIDCVRn(i));
state->trccidcctlr0 = readl(drvdata->base + TRCCIDCCTLR0);
state->trccidcctlr1 = readl(drvdata->base + TRCCIDCCTLR1);
@@ -1309,18 +1319,18 @@ static void etm4_cpu_restore(struct etmv4_drvdata *drvdata)
}
for (i = 0; i < drvdata->nr_addr_cmp * 2; i++) {
- writel_relaxed(state->trcacvr[i],
+ writeq_relaxed(state->trcacvr[i],
drvdata->base + TRCACVRn(i));
- writel_relaxed(state->trcacatr[i],
+ writeq_relaxed(state->trcacatr[i],
drvdata->base + TRCACATRn(i));
}
for (i = 0; i < drvdata->numcidc; i++)
- writel_relaxed(state->trccidcvr[i],
+ writeq_relaxed(state->trccidcvr[i],
drvdata->base + TRCCIDCVRn(i));
for (i = 0; i < drvdata->numvmidc; i++)
- writel_relaxed(state->trcvmidcvr[i],
+ writeq_relaxed(state->trcvmidcvr[i],
drvdata->base + TRCVMIDCVRn(i));
writel_relaxed(state->trccidcctlr0, drvdata->base + TRCCIDCCTLR0);
@@ -1468,6 +1478,9 @@ static int etm4_probe(struct amba_device *adev, const struct amba_id *id)
return -ENOMEM;
}
+ if (fwnode_property_present(dev_fwnode(dev), "qcom,skip-power-up"))
+ drvdata->skip_power_up = true;
+
/* Validity for the resource is already checked by the AMBA core */
base = devm_ioremap_resource(dev, res);
if (IS_ERR(base))
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h
index 4a695bf90582..b8283e1d6d88 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.h
+++ b/drivers/hwtracing/coresight/coresight-etm4x.h
@@ -133,7 +133,7 @@
#define ETMv4_MAX_CTXID_CMP 8
#define ETM_MAX_VMID_CMP 8
#define ETM_MAX_PE_CMP 8
-#define ETM_MAX_RES_SEL 16
+#define ETM_MAX_RES_SEL 32
#define ETM_MAX_SS_CMP 8
#define ETM_ARCH_V4 0x40
@@ -325,7 +325,7 @@ struct etmv4_save_state {
u32 trccntctlr[ETMv4_MAX_CNTR];
u32 trccntvr[ETMv4_MAX_CNTR];
- u32 trcrsctlr[ETM_MAX_RES_SEL * 2];
+ u32 trcrsctlr[ETM_MAX_RES_SEL];
u32 trcssccr[ETM_MAX_SS_CMP];
u32 trcsscsr[ETM_MAX_SS_CMP];
@@ -334,7 +334,7 @@ struct etmv4_save_state {
u64 trcacvr[ETM_MAX_SINGLE_ADDR_CMP];
u64 trcacatr[ETM_MAX_SINGLE_ADDR_CMP];
u64 trccidcvr[ETMv4_MAX_CTXID_CMP];
- u32 trcvmidcvr[ETM_MAX_VMID_CMP];
+ u64 trcvmidcvr[ETM_MAX_VMID_CMP];
u32 trccidcctlr0;
u32 trccidcctlr1;
u32 trcvmidcctlr0;
@@ -407,6 +407,8 @@ struct etmv4_save_state {
* @config: structure holding configuration parameters.
* @save_state: State to be preserved across power loss
* @state_needs_restore: True when there is context to restore after PM exit
+ * @skip_power_up: Indicates if an implementation can skip powering up
+ * the trace unit.
*/
struct etmv4_drvdata {
void __iomem *base;
@@ -454,6 +456,7 @@ struct etmv4_drvdata {
struct etmv4_config config;
struct etmv4_save_state *save_state;
bool state_needs_restore;
+ bool skip_power_up;
};
/* Address comparator access types */
diff --git a/drivers/hwtracing/coresight/coresight-platform.c b/drivers/hwtracing/coresight/coresight-platform.c
index e4912abda3aa..bfd44231d7ad 100644
--- a/drivers/hwtracing/coresight/coresight-platform.c
+++ b/drivers/hwtracing/coresight/coresight-platform.c
@@ -27,9 +27,8 @@ static int coresight_alloc_conns(struct device *dev,
struct coresight_platform_data *pdata)
{
if (pdata->nr_outport) {
- pdata->conns = devm_kzalloc(dev, pdata->nr_outport *
- sizeof(*pdata->conns),
- GFP_KERNEL);
+ pdata->conns = devm_kcalloc(dev, pdata->nr_outport,
+ sizeof(*pdata->conns), GFP_KERNEL);
if (!pdata->conns)
return -ENOMEM;
}
diff --git a/drivers/hwtracing/coresight/coresight-priv.h b/drivers/hwtracing/coresight/coresight-priv.h
index 36c943ae94d5..f2dc625ea585 100644
--- a/drivers/hwtracing/coresight/coresight-priv.h
+++ b/drivers/hwtracing/coresight/coresight-priv.h
@@ -150,6 +150,8 @@ int coresight_enable_path(struct list_head *path, u32 mode, void *sink_data);
struct coresight_device *coresight_get_sink(struct list_head *path);
struct coresight_device *coresight_get_enabled_sink(bool reset);
struct coresight_device *coresight_get_sink_by_id(u32 id);
+struct coresight_device *
+coresight_find_default_sink(struct coresight_device *csdev);
struct list_head *coresight_build_path(struct coresight_device *csdev,
struct coresight_device *sink);
void coresight_release_path(struct list_head *path);
diff --git a/drivers/hwtracing/coresight/coresight-replicator.c b/drivers/hwtracing/coresight/coresight-replicator.c
index e7dc1c31d20d..78acf29c49ca 100644
--- a/drivers/hwtracing/coresight/coresight-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-replicator.c
@@ -14,6 +14,7 @@
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/pm_runtime.h>
+#include <linux/property.h>
#include <linux/clk.h>
#include <linux/of.h>
#include <linux/coresight.h>
@@ -32,12 +33,14 @@ DEFINE_CORESIGHT_DEVLIST(replicator_devs, "replicator");
* @atclk: optional clock for the core parts of the replicator.
* @csdev: component vitals needed by the framework
* @spinlock: serialize enable/disable operations.
+ * @check_idfilter_val: check if the context is lost upon clock removal.
*/
struct replicator_drvdata {
void __iomem *base;
struct clk *atclk;
struct coresight_device *csdev;
spinlock_t spinlock;
+ bool check_idfilter_val;
};
static void dynamic_replicator_reset(struct replicator_drvdata *drvdata)
@@ -66,29 +69,43 @@ static int dynamic_replicator_enable(struct replicator_drvdata *drvdata,
int inport, int outport)
{
int rc = 0;
- u32 reg;
-
- switch (outport) {
- case 0:
- reg = REPLICATOR_IDFILTER0;
- break;
- case 1:
- reg = REPLICATOR_IDFILTER1;
- break;
- default:
- WARN_ON(1);
- return -EINVAL;
- }
+ u32 id0val, id1val;
CS_UNLOCK(drvdata->base);
- if ((readl_relaxed(drvdata->base + REPLICATOR_IDFILTER0) == 0xff) &&
- (readl_relaxed(drvdata->base + REPLICATOR_IDFILTER1) == 0xff))
+ id0val = readl_relaxed(drvdata->base + REPLICATOR_IDFILTER0);
+ id1val = readl_relaxed(drvdata->base + REPLICATOR_IDFILTER1);
+
+ /*
+ * Some replicator designs lose context when AMBA clocks are removed,
+ * so have a check for this.
+ */
+ if (drvdata->check_idfilter_val && id0val == 0x0 && id1val == 0x0)
+ id0val = id1val = 0xff;
+
+ if (id0val == 0xff && id1val == 0xff)
rc = coresight_claim_device_unlocked(drvdata->base);
+ if (!rc) {
+ switch (outport) {
+ case 0:
+ id0val = 0x0;
+ break;
+ case 1:
+ id1val = 0x0;
+ break;
+ default:
+ WARN_ON(1);
+ rc = -EINVAL;
+ }
+ }
+
/* Ensure that the outport is enabled. */
- if (!rc)
- writel_relaxed(0x00, drvdata->base + reg);
+ if (!rc) {
+ writel_relaxed(id0val, drvdata->base + REPLICATOR_IDFILTER0);
+ writel_relaxed(id1val, drvdata->base + REPLICATOR_IDFILTER1);
+ }
+
CS_LOCK(drvdata->base);
return rc;
@@ -239,6 +256,10 @@ static int replicator_probe(struct device *dev, struct resource *res)
desc.groups = replicator_groups;
}
+ if (fwnode_property_present(dev_fwnode(dev),
+ "qcom,replicator-loses-context"))
+ drvdata->check_idfilter_val = true;
+
dev_set_drvdata(dev, drvdata);
pdata = coresight_get_platform_data(dev);
@@ -348,16 +369,9 @@ static int dynamic_replicator_probe(struct amba_device *adev,
}
static const struct amba_id dynamic_replicator_ids[] = {
- {
- .id = 0x000bb909,
- .mask = 0x000fffff,
- },
- {
- /* Coresight SoC-600 */
- .id = 0x000bb9ec,
- .mask = 0x000fffff,
- },
- { 0, 0 },
+ CS_AMBA_ID(0x000bb909),
+ CS_AMBA_ID(0x000bb9ec), /* Coresight SoC-600 */
+ {},
};
static struct amba_driver dynamic_replicator_driver = {
diff --git a/drivers/hwtracing/coresight/coresight-stm.c b/drivers/hwtracing/coresight/coresight-stm.c
index b908ca104645..673d2f56ed1e 100644
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@@ -727,8 +727,6 @@ static int acpi_stm_get_stimulus_area(struct device *dev, struct resource *res)
struct acpi_device *adev = ACPI_COMPANION(dev);
- if (!adev)
- return -ENODEV;
rc = acpi_dev_get_resources(adev, &res_list, NULL, NULL);
if (rc < 0)
return rc;
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etf.c b/drivers/hwtracing/coresight/coresight-tmc-etf.c
index 36cce2bfb744..6375504ba8b0 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etf.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etf.c
@@ -639,15 +639,14 @@ int tmc_read_unprepare_etb(struct tmc_drvdata *drvdata)
spin_lock_irqsave(&drvdata->spinlock, flags);
- /* There is no point in reading a TMC in HW FIFO mode */
- mode = readl_relaxed(drvdata->base + TMC_MODE);
- if (mode != TMC_MODE_CIRCULAR_BUFFER) {
- spin_unlock_irqrestore(&drvdata->spinlock, flags);
- return -EINVAL;
- }
-
/* Re-enable the TMC if need be */
if (drvdata->mode == CS_MODE_SYSFS) {
+ /* There is no point in reading a TMC in HW FIFO mode */
+ mode = readl_relaxed(drvdata->base + TMC_MODE);
+ if (mode != TMC_MODE_CIRCULAR_BUFFER) {
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+ return -EINVAL;
+ }
/*
* The trace run will continue with the same allocated trace
* buffer. As such zero-out the buffer so that we don't end
diff --git a/drivers/hwtracing/coresight/coresight-tmc-etr.c b/drivers/hwtracing/coresight/coresight-tmc-etr.c
index 625882bc8b08..b29c2db94d96 100644
--- a/drivers/hwtracing/coresight/coresight-tmc-etr.c
+++ b/drivers/hwtracing/coresight/coresight-tmc-etr.c
@@ -1110,7 +1110,7 @@ static void __tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
}
-static void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
+void tmc_etr_disable_hw(struct tmc_drvdata *drvdata)
{
__tmc_etr_disable_hw(drvdata);
/* Disable CATU device if this ETR is connected to one */
diff --git a/drivers/hwtracing/coresight/coresight-tmc.c b/drivers/hwtracing/coresight/coresight-tmc.c
index 39fba1d16e6e..7040d583bed9 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@@ -484,7 +484,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
break;
case TMC_CONFIG_TYPE_ETR:
desc.type = CORESIGHT_DEV_TYPE_SINK;
- desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
+ desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_SYSMEM;
desc.ops = &tmc_etr_cs_ops;
ret = tmc_etr_setup_caps(dev, devid,
coresight_get_uci_data(id));
@@ -496,6 +496,7 @@ static int tmc_probe(struct amba_device *adev, const struct amba_id *id)
break;
case TMC_CONFIG_TYPE_ETF:
desc.type = CORESIGHT_DEV_TYPE_LINKSINK;
+ desc.subtype.sink_subtype = CORESIGHT_DEV_SUBTYPE_SINK_BUFFER;
desc.subtype.link_subtype = CORESIGHT_DEV_SUBTYPE_LINK_FIFO;
desc.ops = &tmc_etf_cs_ops;
dev_list = &etf_devs;
@@ -538,6 +539,28 @@ out:
return ret;
}
+static void tmc_shutdown(struct amba_device *adev)
+{
+ unsigned long flags;
+ struct tmc_drvdata *drvdata = amba_get_drvdata(adev);
+
+ spin_lock_irqsave(&drvdata->spinlock, flags);
+
+ if (drvdata->mode == CS_MODE_DISABLED)
+ goto out;
+
+ if (drvdata->config_type == TMC_CONFIG_TYPE_ETR)
+ tmc_etr_disable_hw(drvdata);
+
+ /*
+ * We do not care about coresight unregister here unlike remove
+ * callback which is required for making coresight modular since
+ * the system is going down after this.
+ */
+out:
+ spin_unlock_irqrestore(&drvdata->spinlock, flags);
+}
+
static const struct amba_id tmc_ids[] = {
CS_AMBA_ID(0x000bb961),
/* Coresight SoC 600 TMC-ETR/ETS */
@@ -556,6 +579,7 @@ static struct amba_driver tmc_driver = {
.suppress_bind_attrs = true,
},
.probe = tmc_probe,
+ .shutdown = tmc_shutdown,
.id_table = tmc_ids,
};
builtin_amba_driver(tmc_driver);
diff --git a/drivers/hwtracing/coresight/coresight-tmc.h b/drivers/hwtracing/coresight/coresight-tmc.h
index 71de978575f3..6e8d2dc33d17 100644
--- a/drivers/hwtracing/coresight/coresight-tmc.h
+++ b/drivers/hwtracing/coresight/coresight-tmc.h
@@ -268,6 +268,7 @@ ssize_t tmc_etb_get_sysfs_trace(struct tmc_drvdata *drvdata,
/* ETR functions */
int tmc_read_prepare_etr(struct tmc_drvdata *drvdata);
int tmc_read_unprepare_etr(struct tmc_drvdata *drvdata);
+void tmc_etr_disable_hw(struct tmc_drvdata *drvdata);
extern const struct coresight_ops tmc_etr_cs_ops;
ssize_t tmc_etr_get_sysfs_trace(struct tmc_drvdata *drvdata,
loff_t pos, size_t len, char **bufpp);
diff --git a/drivers/hwtracing/coresight/coresight.c b/drivers/hwtracing/coresight/coresight.c
index f3efbb3b2b4d..e9c90f2de34a 100644
--- a/drivers/hwtracing/coresight/coresight.c
+++ b/drivers/hwtracing/coresight/coresight.c
@@ -769,6 +769,171 @@ void coresight_release_path(struct list_head *path)
path = NULL;
}
+/* return true if the device is a suitable type for a default sink */
+static inline bool coresight_is_def_sink_type(struct coresight_device *csdev)
+{
+ /* sink & correct subtype */
+ if (((csdev->type == CORESIGHT_DEV_TYPE_SINK) ||
+ (csdev->type == CORESIGHT_DEV_TYPE_LINKSINK)) &&
+ (csdev->subtype.sink_subtype >= CORESIGHT_DEV_SUBTYPE_SINK_BUFFER))
+ return true;
+ return false;
+}
+
+/**
+ * coresight_select_best_sink - return the best sink for use as default from
+ * the two provided.
+ *
+ * @sink: current best sink.
+ * @depth: search depth where current sink was found.
+ * @new_sink: new sink for comparison with current sink.
+ * @new_depth: search depth where new sink was found.
+ *
+ * Sinks prioritised according to coresight_dev_subtype_sink, with only
+ * subtypes CORESIGHT_DEV_SUBTYPE_SINK_BUFFER or higher being used.
+ *
+ * Where two sinks of equal priority are found, the sink closest to the
+ * source is used (smallest search depth).
+ *
+ * return @new_sink & update @depth if better than @sink, else return @sink.
+ */
+static struct coresight_device *
+coresight_select_best_sink(struct coresight_device *sink, int *depth,
+ struct coresight_device *new_sink, int new_depth)
+{
+ bool update = false;
+
+ if (!sink) {
+ /* first found at this level */
+ update = true;
+ } else if (new_sink->subtype.sink_subtype >
+ sink->subtype.sink_subtype) {
+ /* found better sink */
+ update = true;
+ } else if ((new_sink->subtype.sink_subtype ==
+ sink->subtype.sink_subtype) &&
+ (*depth > new_depth)) {
+ /* found same but closer sink */
+ update = true;
+ }
+
+ if (update)
+ *depth = new_depth;
+ return update ? new_sink : sink;
+}
+
+/**
+ * coresight_find_sink - recursive function to walk trace connections from
+ * source to find a suitable default sink.
+ *
+ * @csdev: source / current device to check.
+ * @depth: [in] search depth of calling dev, [out] depth of found sink.
+ *
+ * This will walk the connection path from a source (ETM) till a suitable
+ * sink is encountered and return that sink to the original caller.
+ *
+ * If current device is a plain sink return that & depth, otherwise recursively
+ * call child connections looking for a sink. Select best possible using
+ * coresight_select_best_sink.
+ *
+ * return best sink found, or NULL if not found at this node or child nodes.
+ */
+static struct coresight_device *
+coresight_find_sink(struct coresight_device *csdev, int *depth)
+{
+ int i, curr_depth = *depth + 1, found_depth = 0;
+ struct coresight_device *found_sink = NULL;
+
+ if (coresight_is_def_sink_type(csdev)) {
+ found_depth = curr_depth;
+ found_sink = csdev;
+ if (csdev->type == CORESIGHT_DEV_TYPE_SINK)
+ goto return_def_sink;
+ /* look past LINKSINK for something better */
+ }
+
+ /*
+ * Not a sink we want - or possible child sink may be better.
+ * recursively explore each port found on this element.
+ */
+ for (i = 0; i < csdev->pdata->nr_outport; i++) {
+ struct coresight_device *child_dev, *sink = NULL;
+ int child_depth = curr_depth;
+
+ child_dev = csdev->pdata->conns[i].child_dev;
+ if (child_dev)
+ sink = coresight_find_sink(child_dev, &child_depth);
+
+ if (sink)
+ found_sink = coresight_select_best_sink(found_sink,
+ &found_depth,
+ sink,
+ child_depth);
+ }
+
+return_def_sink:
+ /* return found sink and depth */
+ if (found_sink)
+ *depth = found_depth;
+ return found_sink;
+}
+
+/**
+ * coresight_find_default_sink: Find a sink suitable for use as a
+ * default sink.
+ *
+ * @csdev: starting source to find a connected sink.
+ *
+ * Walks connections graph looking for a suitable sink to enable for the
+ * supplied source. Uses CoreSight device subtypes and distance from source
+ * to select the best sink.
+ *
+ * If a sink is found, then the default sink for this device is set and
+ * will be automatically used in future.
+ *
+ * Used in cases where the CoreSight user (perf / sysfs) has not selected a
+ * sink.
+ */
+struct coresight_device *
+coresight_find_default_sink(struct coresight_device *csdev)
+{
+ int depth = 0;
+
+ /* look for a default sink if we have not found for this device */
+ if (!csdev->def_sink)
+ csdev->def_sink = coresight_find_sink(csdev, &depth);
+ return csdev->def_sink;
+}
+
+static int coresight_remove_sink_ref(struct device *dev, void *data)
+{
+ struct coresight_device *sink = data;
+ struct coresight_device *source = to_coresight_device(dev);
+
+ if (source->def_sink == sink)
+ source->def_sink = NULL;
+ return 0;
+}
+
+/**
+ * coresight_clear_default_sink: Remove all default sink references to the
+ * supplied sink.
+ *
+ * If supplied device is a sink, then check all the bus devices and clear
+ * out all the references to this sink from the coresight_device def_sink
+ * parameter.
+ *
+ * @csdev: coresight sink - remove references to this from all sources.
+ */
+static void coresight_clear_default_sink(struct coresight_device *csdev)
+{
+ if ((csdev->type == CORESIGHT_DEV_TYPE_SINK) ||
+ (csdev->type == CORESIGHT_DEV_TYPE_LINKSINK)) {
+ bus_for_each_dev(&coresight_bustype, NULL, csdev,
+ coresight_remove_sink_ref);
+ }
+}
+
/** coresight_validate_source - make sure a source has the right credentials
* @csdev: the device structure for a source.
* @function: the function this was called from.
@@ -1358,6 +1523,7 @@ void coresight_unregister(struct coresight_device *csdev)
etm_perf_del_symlink_sink(csdev);
/* Remove references of that device in the topology */
coresight_remove_conns(csdev);
+ coresight_clear_default_sink(csdev);
coresight_release_platform_data(csdev, csdev->pdata);
device_unregister(&csdev->dev);
}
diff --git a/drivers/interconnect/core.c b/drivers/interconnect/core.c
index 9e1ab701785c..befd111049c0 100644
--- a/drivers/interconnect/core.c
+++ b/drivers/interconnect/core.c
@@ -269,23 +269,22 @@ static int aggregate_requests(struct icc_node *node)
static int apply_constraints(struct icc_path *path)
{
struct icc_node *next, *prev = NULL;
+ struct icc_provider *p;
int ret = -EINVAL;
int i;
for (i = 0; i < path->num_nodes; i++) {
next = path->reqs[i].node;
+ p = next->provider;
- /*
- * Both endpoints should be valid master-slave pairs of the
- * same interconnect provider that will be configured.
- */
- if (!prev || next->provider != prev->provider) {
+ /* both endpoints should be valid master-slave pairs */
+ if (!prev || (p != prev->provider && !p->inter_set)) {
prev = next;
continue;
}
/* set the constraints */
- ret = next->provider->set(prev, next);
+ ret = p->set(prev, next);
if (ret)
goto out;
@@ -340,12 +339,12 @@ EXPORT_SYMBOL_GPL(of_icc_xlate_onecell);
* Returns a valid pointer to struct icc_node on success or ERR_PTR()
* on failure.
*/
-static struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
+struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
{
struct icc_node *node = ERR_PTR(-EPROBE_DEFER);
struct icc_provider *provider;
- if (!spec || spec->args_count != 1)
+ if (!spec)
return ERR_PTR(-EINVAL);
mutex_lock(&icc_lock);
@@ -359,6 +358,7 @@ static struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
return node;
}
+EXPORT_SYMBOL_GPL(of_icc_get_from_provider);
static void devm_icc_release(struct device *dev, void *res)
{
diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
index 3ca4325cc191..ce136d685d14 100644
--- a/drivers/misc/Kconfig
+++ b/drivers/misc/Kconfig
@@ -83,7 +83,7 @@ config IBM_ASM
WARNING: This software may not be supported or function
correctly on your IBM server. Please consult the IBM ServerProven
- website <http://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
+ website <https://www-03.ibm.com/systems/info/x86servers/serverproven/compat/us/>
for information on the specific driver level and support statement
for your IBM server.
diff --git a/drivers/misc/c2port/core.c b/drivers/misc/c2port/core.c
index 33bba1802289..80d87e8a0bea 100644
--- a/drivers/misc/c2port/core.c
+++ b/drivers/misc/c2port/core.c
@@ -923,7 +923,7 @@ struct c2port_device *c2port_device_register(char *name,
}
dev_set_drvdata(c2dev->dev, c2dev);
- strncpy(c2dev->name, name, C2PORT_NAME_LEN);
+ strncpy(c2dev->name, name, C2PORT_NAME_LEN - 1);
c2dev->ops = ops;
mutex_init(&c2dev->mutex);
diff --git a/drivers/misc/cardreader/Makefile b/drivers/misc/cardreader/Makefile
index 1f56267ed2f4..895128475d83 100644
--- a/drivers/misc/cardreader/Makefile
+++ b/drivers/misc/cardreader/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_MISC_ALCOR_PCI) += alcor_pci.o
obj-$(CONFIG_MISC_RTSX_PCI) += rtsx_pci.o
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o rts5260.o rts5261.o
+rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o rts5260.o rts5261.o rts5228.o
obj-$(CONFIG_MISC_RTSX_USB) += rtsx_usb.o
diff --git a/drivers/misc/cardreader/rtl8411.c b/drivers/misc/cardreader/rtl8411.c
index 489ebe907688..a07674ed0596 100644
--- a/drivers/misc/cardreader/rtl8411.c
+++ b/drivers/misc/cardreader/rtl8411.c
@@ -37,10 +37,11 @@ static int rtl8411b_is_qfn48(struct rtsx_pcr *pcr)
static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg1 = 0;
u8 reg3 = 0;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg1);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg1);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg1);
if (!rtsx_vendor_setting_valid(reg1))
@@ -52,16 +53,17 @@ static void rtl8411_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg1);
- rtsx_pci_read_config_byte(pcr, PCR_SETTING_REG3, &reg3);
+ pci_read_config_byte(pdev, PCR_SETTING_REG3, &reg3);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG3, reg3);
pcr->sd30_drive_sel_3v3 = rtl8411_reg_to_sd30_drive_sel_3v3(reg3);
}
static void rtl8411b_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg = 0;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
diff --git a/drivers/misc/cardreader/rts5209.c b/drivers/misc/cardreader/rts5209.c
index 659056164b21..39a6a7ecc32e 100644
--- a/drivers/misc/cardreader/rts5209.c
+++ b/drivers/misc/cardreader/rts5209.c
@@ -23,9 +23,10 @@ static u8 rts5209_get_ic_version(struct rtsx_pcr *pcr)
static void rts5209_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (rts5209_vendor_setting1_valid(reg)) {
@@ -34,7 +35,7 @@ static void rts5209_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->aspm_en = rts5209_reg_to_aspm(reg);
}
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
if (rts5209_vendor_setting2_valid(reg)) {
diff --git a/drivers/misc/cardreader/rts5227.c b/drivers/misc/cardreader/rts5227.c
index 3a9467aaa435..f5f392ddf3d6 100644
--- a/drivers/misc/cardreader/rts5227.c
+++ b/drivers/misc/cardreader/rts5227.c
@@ -56,9 +56,10 @@ static void rts5227_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
@@ -69,7 +70,7 @@ static void rts5227_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
diff --git a/drivers/misc/cardreader/rts5228.c b/drivers/misc/cardreader/rts5228.c
new file mode 100644
index 000000000000..28feab1449ab
--- /dev/null
+++ b/drivers/misc/cardreader/rts5228.c
@@ -0,0 +1,747 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2018-2019 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Author:
+ * Ricky WU <ricky_wu@realtek.com>
+ * Rui FENG <rui_feng@realsil.com.cn>
+ * Wei WANG <wei_wang@realsil.com.cn>
+ */
+
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/rtsx_pci.h>
+
+#include "rts5228.h"
+#include "rtsx_pcr.h"
+
+static u8 rts5228_get_ic_version(struct rtsx_pcr *pcr)
+{
+ u8 val;
+
+ rtsx_pci_read_register(pcr, DUMMY_REG_RESET_0, &val);
+ return val & IC_VERSION_MASK;
+}
+
+static void rts5228_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
+{
+ u8 driving_3v3[4][3] = {
+ {0x13, 0x13, 0x13},
+ {0x96, 0x96, 0x96},
+ {0x7F, 0x7F, 0x7F},
+ {0x96, 0x96, 0x96},
+ };
+ u8 driving_1v8[4][3] = {
+ {0x99, 0x99, 0x99},
+ {0xB5, 0xB5, 0xB5},
+ {0xE6, 0x7E, 0xFE},
+ {0x6B, 0x6B, 0x6B},
+ };
+ u8 (*driving)[3], drive_sel;
+
+ if (voltage == OUTPUT_3V3) {
+ driving = driving_3v3;
+ drive_sel = pcr->sd30_drive_sel_3v3;
+ } else {
+ driving = driving_1v8;
+ drive_sel = pcr->sd30_drive_sel_1v8;
+ }
+
+ rtsx_pci_write_register(pcr, SD30_CLK_DRIVE_SEL,
+ 0xFF, driving[drive_sel][0]);
+
+ rtsx_pci_write_register(pcr, SD30_CMD_DRIVE_SEL,
+ 0xFF, driving[drive_sel][1]);
+
+ rtsx_pci_write_register(pcr, SD30_DAT_DRIVE_SEL,
+ 0xFF, driving[drive_sel][2]);
+}
+
+static void rtsx5228_fetch_vendor_settings(struct rtsx_pcr *pcr)
+{
+ struct pci_dev *pdev = pcr->pci;
+ u32 reg;
+
+ /* 0x724~0x727 */
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
+
+ if (!rtsx_vendor_setting_valid(reg)) {
+ pcr_dbg(pcr, "skip fetch vendor setting\n");
+ return;
+ }
+ pcr->sd30_drive_sel_1v8 = rtsx_reg_to_sd30_drive_sel_1v8(reg);
+ pcr->aspm_en = rtsx_reg_to_aspm(reg);
+
+ /* 0x814~0x817 */
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
+ pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
+
+ pcr->rtd3_en = rtsx_reg_to_rtd3(reg);
+ if (rtsx_check_mmc_support(reg))
+ pcr->extra_caps |= EXTRA_CAPS_NO_MMC;
+ pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
+ if (rtsx_reg_check_reverse_socket(reg))
+ pcr->flags |= PCR_REVERSE_SOCKET;
+}
+
+static int rts5228_optimize_phy(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_phy_register(pcr, 0x07, 0x8F40);
+}
+
+static void rts5228_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
+{
+ /* Set relink_time to 0 */
+ rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 1, MASK_8_BIT_DEF, 0);
+ rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 2, MASK_8_BIT_DEF, 0);
+ rtsx_pci_write_register(pcr, AUTOLOAD_CFG_BASE + 3,
+ RELINK_TIME_MASK, 0);
+
+ if (pm_state == HOST_ENTER_S3)
+ rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3,
+ D3_DELINK_MODE_EN, D3_DELINK_MODE_EN);
+
+ rtsx_pci_write_register(pcr, FPDCTL,
+ SSC_POWER_DOWN, SSC_POWER_DOWN);
+}
+
+static int rts5228_enable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL,
+ LED_SHINE_MASK, LED_SHINE_EN);
+}
+
+static int rts5228_disable_auto_blink(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, OLT_LED_CTL,
+ LED_SHINE_MASK, LED_SHINE_DISABLE);
+}
+
+static int rts5228_turn_on_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL,
+ 0x02, 0x02);
+}
+
+static int rts5228_turn_off_led(struct rtsx_pcr *pcr)
+{
+ return rtsx_pci_write_register(pcr, GPIO_CTL,
+ 0x02, 0x00);
+}
+
+/* SD Pull Control Enable:
+ * SD_DAT[3:0] ==> pull up
+ * SD_CD ==> pull up
+ * SD_WP ==> pull up
+ * SD_CMD ==> pull up
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5228_sd_pull_ctl_enable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0xAA),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xE9),
+ 0,
+};
+
+/* SD Pull Control Disable:
+ * SD_DAT[3:0] ==> pull down
+ * SD_CD ==> pull up
+ * SD_WP ==> pull down
+ * SD_CMD ==> pull down
+ * SD_CLK ==> pull down
+ */
+static const u32 rts5228_sd_pull_ctl_disable_tbl[] = {
+ RTSX_REG_PAIR(CARD_PULL_CTL2, 0x55),
+ RTSX_REG_PAIR(CARD_PULL_CTL3, 0xD5),
+ 0,
+};
+
+static int rts5228_sd_set_sample_push_timing_sd30(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_write_register(pcr, SD_CFG1, SD_MODE_SELECT_MASK
+ | SD_ASYNC_FIFO_NOT_RST, SD_30_MODE | SD_ASYNC_FIFO_NOT_RST);
+ rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_write_register(pcr, CARD_CLK_SOURCE, 0xFF,
+ CRC_VAR_CLK0 | SD30_FIX_CLK | SAMPLE_VAR_CLK1);
+ rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
+
+ return 0;
+}
+
+static int rts5228_card_power_on(struct rtsx_pcr *pcr, int card)
+{
+ struct rtsx_cr_option *option = &pcr->option;
+
+ if (option->ocp_en)
+ rtsx_pci_enable_ocp(pcr);
+
+ rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0,
+ CFG_SD_POW_AUTO_PD, CFG_SD_POW_AUTO_PD);
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG1,
+ RTS5228_LDO1_TUNE_MASK, RTS5228_LDO1_33);
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
+ RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_SOFTSTART);
+ mdelay(2);
+ rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
+ RTS5228_LDO1_POWERON_MASK, RTS5228_LDO1_FULLON);
+
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
+ RTS5228_LDO3318_POWERON, RTS5228_LDO3318_POWERON);
+
+ msleep(20);
+
+ rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, SD_OUTPUT_EN);
+
+ /* Initialize SD_CFG1 register */
+ rtsx_pci_write_register(pcr, SD_CFG1, 0xFF,
+ SD_CLK_DIVIDE_128 | SD_20_MODE | SD_BUS_WIDTH_1BIT);
+
+ rtsx_pci_write_register(pcr, SD_SAMPLE_POINT_CTL,
+ 0xFF, SD20_RX_POS_EDGE);
+ rtsx_pci_write_register(pcr, SD_PUSH_POINT_CTL, 0xFF, 0);
+ rtsx_pci_write_register(pcr, CARD_STOP, SD_STOP | SD_CLR_ERR,
+ SD_STOP | SD_CLR_ERR);
+
+ /* Reset SD_CFG3 register */
+ rtsx_pci_write_register(pcr, SD_CFG3, SD30_CLK_END_EN, 0);
+ rtsx_pci_write_register(pcr, REG_SD_STOP_SDCLK_CFG,
+ SD30_CLK_STOP_CFG_EN | SD30_CLK_STOP_CFG1 |
+ SD30_CLK_STOP_CFG0, 0);
+
+ if (pcr->extra_caps & EXTRA_CAPS_SD_SDR50 ||
+ pcr->extra_caps & EXTRA_CAPS_SD_SDR104)
+ rts5228_sd_set_sample_push_timing_sd30(pcr);
+
+ return 0;
+}
+
+static int rts5228_switch_output_voltage(struct rtsx_pcr *pcr, u8 voltage)
+{
+ int err;
+ u16 val = 0;
+
+ rtsx_pci_write_register(pcr, RTS5228_CARD_PWR_CTL,
+ RTS5228_PUPDC, RTS5228_PUPDC);
+
+ switch (voltage) {
+ case OUTPUT_3V3:
+ rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val);
+ val |= PHY_TUNE_SDBUS_33;
+ err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val);
+ if (err < 0)
+ return err;
+
+ rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG,
+ RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_33);
+ rtsx_pci_write_register(pcr, SD_PAD_CTL,
+ SD_IO_USING_1V8, 0);
+ break;
+ case OUTPUT_1V8:
+ rtsx_pci_read_phy_register(pcr, PHY_TUNE, &val);
+ val &= ~PHY_TUNE_SDBUS_33;
+ err = rtsx_pci_write_phy_register(pcr, PHY_TUNE, val);
+ if (err < 0)
+ return err;
+
+ rtsx_pci_write_register(pcr, RTS5228_DV3318_CFG,
+ RTS5228_DV3318_TUNE_MASK, RTS5228_DV3318_18);
+ rtsx_pci_write_register(pcr, SD_PAD_CTL,
+ SD_IO_USING_1V8, SD_IO_USING_1V8);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ /* set pad drive */
+ rts5228_fill_driving(pcr, voltage);
+
+ return 0;
+}
+
+static void rts5228_stop_cmd(struct rtsx_pcr *pcr)
+{
+ rtsx_pci_writel(pcr, RTSX_HCBCTLR, STOP_CMD);
+ rtsx_pci_writel(pcr, RTSX_HDBCTLR, STOP_DMA);
+ rtsx_pci_write_register(pcr, RTS5260_DMA_RST_CTL_0,
+ RTS5260_DMA_RST | RTS5260_ADMA3_RST,
+ RTS5260_DMA_RST | RTS5260_ADMA3_RST);
+ rtsx_pci_write_register(pcr, RBCTL, RB_FLUSH, RB_FLUSH);
+}
+
+static void rts5228_card_before_power_off(struct rtsx_pcr *pcr)
+{
+ rts5228_stop_cmd(pcr);
+ rts5228_switch_output_voltage(pcr, OUTPUT_3V3);
+}
+
+static void rts5228_enable_ocp(struct rtsx_pcr *pcr)
+{
+ u8 val = 0;
+
+ val = SD_OCP_INT_EN | SD_DETECT_EN;
+ rtsx_pci_write_register(pcr, REG_OCPCTL, 0xFF, val);
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN);
+}
+
+static void rts5228_disable_ocp(struct rtsx_pcr *pcr)
+{
+ u8 mask = 0;
+
+ mask = SD_OCP_INT_EN | SD_DETECT_EN;
+ rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0);
+}
+
+static int rts5228_card_power_off(struct rtsx_pcr *pcr, int card)
+{
+ int err = 0;
+
+ rts5228_card_before_power_off(pcr);
+ err = rtsx_pci_write_register(pcr, RTS5228_LDO1233318_POW_CTL,
+ RTS5228_LDO_POWERON_MASK, 0);
+ rtsx_pci_write_register(pcr, REG_CRC_DUMMY_0, CFG_SD_POW_AUTO_PD, 0);
+
+ if (pcr->option.ocp_en)
+ rtsx_pci_disable_ocp(pcr);
+
+ return err;
+}
+
+static void rts5228_init_ocp(struct rtsx_pcr *pcr)
+{
+ struct rtsx_cr_option *option = &pcr->option;
+
+ if (option->ocp_en) {
+ u8 mask, val;
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN);
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_THD_MASK, option->sd_800mA_ocp_thd);
+
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_LMT_THD_MASK,
+ RTS5228_LDO1_LMT_THD_1500);
+
+ rtsx_pci_read_register(pcr, RTS5228_LDO1_CFG0, &val);
+
+ mask = SD_OCP_GLITCH_MASK;
+ val = pcr->hw_param.ocp_glitch;
+ rtsx_pci_write_register(pcr, REG_OCPGLITCH, mask, val);
+
+ rts5228_enable_ocp(pcr);
+
+ } else {
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG0,
+ RTS5228_LDO1_OCP_EN | RTS5228_LDO1_OCP_LMT_EN, 0);
+ }
+}
+
+static void rts5228_clear_ocpstat(struct rtsx_pcr *pcr)
+{
+ u8 mask = 0;
+ u8 val = 0;
+
+ mask = SD_OCP_INT_CLR | SD_OC_CLR;
+ val = SD_OCP_INT_CLR | SD_OC_CLR;
+
+ rtsx_pci_write_register(pcr, REG_OCPCTL, mask, val);
+
+ udelay(1000);
+ rtsx_pci_write_register(pcr, REG_OCPCTL, mask, 0);
+
+}
+
+static void rts5228_process_ocp(struct rtsx_pcr *pcr)
+{
+ if (!pcr->option.ocp_en)
+ return;
+
+ rtsx_pci_get_ocpstat(pcr, &pcr->ocp_stat);
+
+ if (pcr->ocp_stat & (SD_OC_NOW | SD_OC_EVER)) {
+ rts5228_clear_ocpstat(pcr);
+ rts5228_card_power_off(pcr, RTSX_SD_CARD);
+ rtsx_pci_write_register(pcr, CARD_OE, SD_OUTPUT_EN, 0);
+ pcr->ocp_stat = 0;
+ }
+
+}
+
+static void rts5228_init_from_cfg(struct rtsx_pcr *pcr)
+{
+ struct pci_dev *pdev = pcr->pci;
+ int l1ss;
+ u32 lval;
+ struct rtsx_cr_option *option = &pcr->option;
+
+ l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+ if (!l1ss)
+ return;
+
+ pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
+
+ if (0 == (lval & 0x0F))
+ rtsx_pci_enable_oobs_polling(pcr);
+ else
+ rtsx_pci_disable_oobs_polling(pcr);
+
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
+ rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
+ else
+ rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN);
+
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
+ rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
+ else
+ rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN);
+
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
+ rtsx_set_dev_flag(pcr, PM_L1_1_EN);
+ else
+ rtsx_clear_dev_flag(pcr, PM_L1_1_EN);
+
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
+ rtsx_set_dev_flag(pcr, PM_L1_2_EN);
+ else
+ rtsx_clear_dev_flag(pcr, PM_L1_2_EN);
+
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0);
+ if (option->ltr_en) {
+ u16 val;
+
+ pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
+ if (val & PCI_EXP_DEVCTL2_LTR_EN) {
+ option->ltr_enabled = true;
+ option->ltr_active = true;
+ rtsx_set_ltr_latency(pcr, option->ltr_active_latency);
+ } else {
+ option->ltr_enabled = false;
+ }
+ }
+
+ if (rtsx_check_dev_flag(pcr, ASPM_L1_1_EN | ASPM_L1_2_EN
+ | PM_L1_1_EN | PM_L1_2_EN))
+ option->force_clkreq_0 = false;
+ else
+ option->force_clkreq_0 = true;
+}
+
+static int rts5228_extra_init_hw(struct rtsx_pcr *pcr)
+{
+ struct rtsx_cr_option *option = &pcr->option;
+
+ rtsx_pci_write_register(pcr, RTS5228_AUTOLOAD_CFG1,
+ CD_RESUME_EN_MASK, CD_RESUME_EN_MASK);
+
+ rts5228_init_from_cfg(pcr);
+
+ rtsx_pci_write_register(pcr, L1SUB_CONFIG1,
+ AUX_CLK_ACTIVE_SEL_MASK, MAC_CKSW_DONE);
+ rtsx_pci_write_register(pcr, L1SUB_CONFIG3, 0xFF, 0);
+
+ rtsx_pci_write_register(pcr, FUNC_FORCE_CTL,
+ FUNC_FORCE_UPME_XMT_DBG, FUNC_FORCE_UPME_XMT_DBG);
+
+ rtsx_pci_write_register(pcr, PCLK_CTL,
+ PCLK_MODE_SEL, PCLK_MODE_SEL);
+
+ rtsx_pci_write_register(pcr, PM_EVENT_DEBUG, PME_DEBUG_0, PME_DEBUG_0);
+ rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, CLK_PM_EN, CLK_PM_EN);
+
+ /* LED shine disabled, set initial shine cycle period */
+ rtsx_pci_write_register(pcr, OLT_LED_CTL, 0x0F, 0x02);
+
+ /* Configure driving */
+ rts5228_fill_driving(pcr, OUTPUT_3V3);
+
+ if (pcr->flags & PCR_REVERSE_SOCKET)
+ rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x30);
+ else
+ rtsx_pci_write_register(pcr, PETXCFG, 0x30, 0x00);
+
+ /*
+ * If u_force_clkreq_0 is enabled, CLKREQ# PIN will be forced
+ * to drive low, and we forcibly request clock.
+ */
+ if (option->force_clkreq_0)
+ rtsx_pci_write_register(pcr, PETXCFG,
+ FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_LOW);
+ else
+ rtsx_pci_write_register(pcr, PETXCFG,
+ FORCE_CLKREQ_DELINK_MASK, FORCE_CLKREQ_HIGH);
+
+ rtsx_pci_write_register(pcr, PWD_SUSPEND_EN, 0xFF, 0xFB);
+ rtsx_pci_write_register(pcr, pcr->reg_pm_ctrl3, 0x10, 0x00);
+ rtsx_pci_write_register(pcr, RTS5228_REG_PME_FORCE_CTL,
+ FORCE_PM_CONTROL | FORCE_PM_VALUE, FORCE_PM_CONTROL);
+
+ return 0;
+}
+
+static void rts5228_enable_aspm(struct rtsx_pcr *pcr, bool enable)
+{
+ u8 mask, val;
+
+ if (pcr->aspm_enabled == enable)
+ return;
+
+ mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ val |= (pcr->aspm_en & 0x02);
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
+ pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPMC, pcr->aspm_en);
+ pcr->aspm_enabled = enable;
+}
+
+static void rts5228_disable_aspm(struct rtsx_pcr *pcr, bool enable)
+{
+ u8 mask, val;
+
+ if (pcr->aspm_enabled == enable)
+ return;
+
+ pcie_capability_clear_and_set_word(pcr->pci, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_ASPMC, 0);
+ mask = FORCE_ASPM_VAL_MASK | FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ val = FORCE_ASPM_CTL0 | FORCE_ASPM_CTL1;
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, mask, val);
+ rtsx_pci_write_register(pcr, SD_CFG1, SD_ASYNC_FIFO_NOT_RST, 0);
+ mdelay(10);
+ pcr->aspm_enabled = enable;
+}
+
+static void rts5228_set_aspm(struct rtsx_pcr *pcr, bool enable)
+{
+ if (enable)
+ rts5228_enable_aspm(pcr, true);
+ else
+ rts5228_disable_aspm(pcr, false);
+}
+
+static void rts5228_set_l1off_cfg_sub_d0(struct rtsx_pcr *pcr, int active)
+{
+ struct rtsx_cr_option *option = &pcr->option;
+ int aspm_L1_1, aspm_L1_2;
+ u8 val = 0;
+
+ aspm_L1_1 = rtsx_check_dev_flag(pcr, ASPM_L1_1_EN);
+ aspm_L1_2 = rtsx_check_dev_flag(pcr, ASPM_L1_2_EN);
+
+ if (active) {
+ /* run, latency: 60us */
+ if (aspm_L1_1)
+ val = option->ltr_l1off_snooze_sspwrgate;
+ } else {
+ /* l1off, latency: 300us */
+ if (aspm_L1_2)
+ val = option->ltr_l1off_sspwrgate;
+ }
+
+ rtsx_set_l1off_sub(pcr, val);
+}
+
+static const struct pcr_ops rts5228_pcr_ops = {
+ .fetch_vendor_settings = rtsx5228_fetch_vendor_settings,
+ .turn_on_led = rts5228_turn_on_led,
+ .turn_off_led = rts5228_turn_off_led,
+ .extra_init_hw = rts5228_extra_init_hw,
+ .enable_auto_blink = rts5228_enable_auto_blink,
+ .disable_auto_blink = rts5228_disable_auto_blink,
+ .card_power_on = rts5228_card_power_on,
+ .card_power_off = rts5228_card_power_off,
+ .switch_output_voltage = rts5228_switch_output_voltage,
+ .force_power_down = rts5228_force_power_down,
+ .stop_cmd = rts5228_stop_cmd,
+ .set_aspm = rts5228_set_aspm,
+ .set_l1off_cfg_sub_d0 = rts5228_set_l1off_cfg_sub_d0,
+ .enable_ocp = rts5228_enable_ocp,
+ .disable_ocp = rts5228_disable_ocp,
+ .init_ocp = rts5228_init_ocp,
+ .process_ocp = rts5228_process_ocp,
+ .clear_ocpstat = rts5228_clear_ocpstat,
+ .optimize_phy = rts5228_optimize_phy,
+};
+
+
+static inline u8 double_ssc_depth(u8 depth)
+{
+ return ((depth > 1) ? (depth - 1) : depth);
+}
+
+int rts5228_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+ u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk)
+{
+ int err, clk;
+ u16 n;
+ u8 clk_divider, mcu_cnt, div;
+ static const u8 depth[] = {
+ [RTSX_SSC_DEPTH_4M] = RTS5228_SSC_DEPTH_4M,
+ [RTSX_SSC_DEPTH_2M] = RTS5228_SSC_DEPTH_2M,
+ [RTSX_SSC_DEPTH_1M] = RTS5228_SSC_DEPTH_1M,
+ [RTSX_SSC_DEPTH_500K] = RTS5228_SSC_DEPTH_512K,
+ };
+
+ if (initial_mode) {
+ /* We use 250k(around) here, in initial stage */
+ clk_divider = SD_CLK_DIVIDE_128;
+ card_clock = 30000000;
+ } else {
+ clk_divider = SD_CLK_DIVIDE_0;
+ }
+ err = rtsx_pci_write_register(pcr, SD_CFG1,
+ SD_CLK_DIVIDE_MASK, clk_divider);
+ if (err < 0)
+ return err;
+
+ card_clock /= 1000000;
+ pcr_dbg(pcr, "Switch card clock to %dMHz\n", card_clock);
+
+ clk = card_clock;
+ if (!initial_mode && double_clk)
+ clk = card_clock * 2;
+ pcr_dbg(pcr, "Internal SSC clock: %dMHz (cur_clock = %d)\n",
+ clk, pcr->cur_clock);
+
+ if (clk == pcr->cur_clock)
+ return 0;
+
+ if (pcr->ops->conv_clk_and_div_n)
+ n = pcr->ops->conv_clk_and_div_n(clk, CLK_TO_DIV_N);
+ else
+ n = clk - 4;
+ if ((clk <= 4) || (n > 396))
+ return -EINVAL;
+
+ mcu_cnt = 125/clk + 3;
+ if (mcu_cnt > 15)
+ mcu_cnt = 15;
+
+ div = CLK_DIV_1;
+ while ((n < MIN_DIV_N_PCR - 4) && (div < CLK_DIV_8)) {
+ if (pcr->ops->conv_clk_and_div_n) {
+ int dbl_clk = pcr->ops->conv_clk_and_div_n(n,
+ DIV_N_TO_CLK) * 2;
+ n = pcr->ops->conv_clk_and_div_n(dbl_clk,
+ CLK_TO_DIV_N);
+ } else {
+ n = (n + 4) * 2 - 4;
+ }
+ div++;
+ }
+
+ n = (n / 2) - 1;
+ pcr_dbg(pcr, "n = %d, div = %d\n", n, div);
+
+ ssc_depth = depth[ssc_depth];
+ if (double_clk)
+ ssc_depth = double_ssc_depth(ssc_depth);
+
+ if (ssc_depth) {
+ if (div == CLK_DIV_2) {
+ if (ssc_depth > 1)
+ ssc_depth -= 1;
+ else
+ ssc_depth = RTS5228_SSC_DEPTH_8M;
+ } else if (div == CLK_DIV_4) {
+ if (ssc_depth > 2)
+ ssc_depth -= 2;
+ else
+ ssc_depth = RTS5228_SSC_DEPTH_8M;
+ } else if (div == CLK_DIV_8) {
+ if (ssc_depth > 3)
+ ssc_depth -= 3;
+ else
+ ssc_depth = RTS5228_SSC_DEPTH_8M;
+ }
+ } else {
+ ssc_depth = 0;
+ }
+ pcr_dbg(pcr, "ssc_depth = %d\n", ssc_depth);
+
+ rtsx_pci_init_cmd(pcr);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_CTL,
+ CLK_LOW_FREQ, CLK_LOW_FREQ);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, CLK_DIV,
+ 0xFF, (div << 4) | mcu_cnt);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2,
+ SSC_DEPTH_MASK, ssc_depth);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_DIV_N_0, 0xFF, n);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL1, SSC_RSTB, SSC_RSTB);
+ if (vpclk) {
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL,
+ PHASE_NOT_RESET, 0);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK0_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SD_VPCLK1_CTL,
+ PHASE_NOT_RESET, PHASE_NOT_RESET);
+ }
+
+ err = rtsx_pci_send_cmd(pcr, 2000);
+ if (err < 0)
+ return err;
+
+ /* Wait SSC clock stable */
+ udelay(SSC_CLOCK_STABLE_WAIT);
+ err = rtsx_pci_write_register(pcr, CLK_CTL, CLK_LOW_FREQ, 0);
+ if (err < 0)
+ return err;
+
+ pcr->cur_clock = clk;
+ return 0;
+
+}
+
+void rts5228_init_params(struct rtsx_pcr *pcr)
+{
+ struct rtsx_cr_option *option = &pcr->option;
+ struct rtsx_hw_param *hw_param = &pcr->hw_param;
+
+ pcr->extra_caps = EXTRA_CAPS_SD_SDR50 | EXTRA_CAPS_SD_SDR104;
+ pcr->num_slots = 1;
+ pcr->ops = &rts5228_pcr_ops;
+
+ pcr->flags = 0;
+ pcr->card_drive_sel = RTSX_CARD_DRIVE_DEFAULT;
+ pcr->sd30_drive_sel_1v8 = CFG_DRIVER_TYPE_B;
+ pcr->sd30_drive_sel_3v3 = CFG_DRIVER_TYPE_B;
+ pcr->aspm_en = ASPM_L1_EN;
+ pcr->tx_initial_phase = SET_CLOCK_PHASE(28, 27, 11);
+ pcr->rx_initial_phase = SET_CLOCK_PHASE(24, 6, 5);
+
+ pcr->ic_version = rts5228_get_ic_version(pcr);
+ pcr->sd_pull_ctl_enable_tbl = rts5228_sd_pull_ctl_enable_tbl;
+ pcr->sd_pull_ctl_disable_tbl = rts5228_sd_pull_ctl_disable_tbl;
+
+ pcr->reg_pm_ctrl3 = RTS5228_AUTOLOAD_CFG3;
+
+ option->dev_flags = (LTR_L1SS_PWR_GATE_CHECK_CARD_EN
+ | LTR_L1SS_PWR_GATE_EN);
+ option->ltr_en = true;
+
+ /* init latency of active, idle, L1OFF to 60us, 300us, 3ms */
+ option->ltr_active_latency = LTR_ACTIVE_LATENCY_DEF;
+ option->ltr_idle_latency = LTR_IDLE_LATENCY_DEF;
+ option->ltr_l1off_latency = LTR_L1OFF_LATENCY_DEF;
+ option->l1_snooze_delay = L1_SNOOZE_DELAY_DEF;
+ option->ltr_l1off_sspwrgate = 0x7F;
+ option->ltr_l1off_snooze_sspwrgate = 0x78;
+
+ option->ocp_en = 1;
+ hw_param->interrupt_en |= SD_OC_INT_EN;
+ hw_param->ocp_glitch = SD_OCP_GLITCH_800U;
+ option->sd_800mA_ocp_thd = RTS5228_LDO1_OCP_THD_930;
+}
diff --git a/drivers/misc/cardreader/rts5228.h b/drivers/misc/cardreader/rts5228.h
new file mode 100644
index 000000000000..6a872246aeed
--- /dev/null
+++ b/drivers/misc/cardreader/rts5228.h
@@ -0,0 +1,168 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2018-2019 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * Author:
+ * Ricky WU <ricky_wu@realtek.com>
+ * Rui FENG <rui_feng@realsil.com.cn>
+ * Wei WANG <wei_wang@realsil.com.cn>
+ */
+#ifndef RTS5228_H
+#define RTS5228_H
+
+
+#define RTS5228_AUTOLOAD_CFG0 0xFF7B
+#define RTS5228_AUTOLOAD_CFG1 0xFF7C
+#define RTS5228_AUTOLOAD_CFG2 0xFF7D
+#define RTS5228_AUTOLOAD_CFG3 0xFF7E
+#define RTS5228_AUTOLOAD_CFG4 0xFF7F
+
+#define RTS5228_REG_VREF 0xFE97
+#define RTS5228_PWD_SUSPND_EN (1 << 4)
+
+#define RTS5228_PAD_H3L1 0xFF79
+#define PAD_GPIO_H3L1 (1 << 3)
+
+/* SSC_CTL2 0xFC12 */
+#define RTS5228_SSC_DEPTH_MASK 0x07
+#define RTS5228_SSC_DEPTH_DISALBE 0x00
+#define RTS5228_SSC_DEPTH_8M 0x01
+#define RTS5228_SSC_DEPTH_4M 0x02
+#define RTS5228_SSC_DEPTH_2M 0x03
+#define RTS5228_SSC_DEPTH_1M 0x04
+#define RTS5228_SSC_DEPTH_512K 0x05
+#define RTS5228_SSC_DEPTH_256K 0x06
+#define RTS5228_SSC_DEPTH_128K 0x07
+
+/* DMACTL 0xFE2C */
+#define RTS5228_DMA_PACK_SIZE_MASK 0xF0
+
+#define RTS5228_REG_LDO12_CFG 0xFF6E
+#define RTS5228_LDO12_VO_TUNE_MASK (0x07<<1)
+#define RTS5228_LDO12_100 (0x00<<1)
+#define RTS5228_LDO12_105 (0x01<<1)
+#define RTS5228_LDO12_110 (0x02<<1)
+#define RTS5228_LDO12_115 (0x03<<1)
+#define RTS5228_LDO12_120 (0x04<<1)
+#define RTS5228_LDO12_125 (0x05<<1)
+#define RTS5228_LDO12_130 (0x06<<1)
+#define RTS5228_LDO12_135 (0x07<<1)
+#define RTS5228_REG_PWD_LDO12 (0x01<<0)
+
+#define RTS5228_REG_LDO12_L12 0xFF6F
+#define RTS5228_LDO12_L12_MASK (0x07<<4)
+#define RTS5228_LDO12_L12_120 (0x04<<4)
+
+/* LDO control register */
+#define RTS5228_CARD_PWR_CTL 0xFD50
+#define RTS5228_PUPDC (0x01<<5)
+
+#define RTS5228_LDO1233318_POW_CTL 0xFF70
+#define RTS5228_LDO3318_POWERON (0x01<<3)
+#define RTS5228_LDO1_POWEROFF (0x00<<0)
+#define RTS5228_LDO1_SOFTSTART (0x01<<0)
+#define RTS5228_LDO1_FULLON (0x03<<0)
+#define RTS5228_LDO1_POWERON_MASK (0x03<<0)
+#define RTS5228_LDO_POWERON_MASK (0x0F<<0)
+
+#define RTS5228_DV3318_CFG 0xFF71
+#define RTS5228_DV3318_TUNE_MASK (0x07<<4)
+#define RTS5228_DV3318_17 (0x00<<4)
+#define RTS5228_DV3318_1V75 (0x01<<4)
+#define RTS5228_DV3318_18 (0x02<<4)
+#define RTS5228_DV3318_1V85 (0x03<<4)
+#define RTS5228_DV3318_19 (0x04<<4)
+#define RTS5228_DV3318_33 (0x07<<4)
+#define RTS5228_DV3318_SR_MASK (0x03<<2)
+#define RTS5228_DV3318_SR_0 (0x00<<2)
+#define RTS5228_DV3318_SR_250 (0x01<<2)
+#define RTS5228_DV3318_SR_500 (0x02<<2)
+#define RTS5228_DV3318_SR_1000 (0x03<<2)
+
+#define RTS5228_LDO1_CFG0 0xFF72
+#define RTS5228_LDO1_OCP_THD_MASK (0x07<<5)
+#define RTS5228_LDO1_OCP_EN (0x01<<4)
+#define RTS5228_LDO1_OCP_LMT_THD_MASK (0x03<<2)
+#define RTS5228_LDO1_OCP_LMT_EN (0x01<<1)
+
+#define RTS5228_LDO1_OCP_THD_730 (0x00<<5)
+#define RTS5228_LDO1_OCP_THD_780 (0x01<<5)
+#define RTS5228_LDO1_OCP_THD_860 (0x02<<5)
+#define RTS5228_LDO1_OCP_THD_930 (0x03<<5)
+#define RTS5228_LDO1_OCP_THD_1000 (0x04<<5)
+#define RTS5228_LDO1_OCP_THD_1070 (0x05<<5)
+#define RTS5228_LDO1_OCP_THD_1140 (0x06<<5)
+#define RTS5228_LDO1_OCP_THD_1220 (0x07<<5)
+
+#define RTS5228_LDO1_LMT_THD_450 (0x00<<2)
+#define RTS5228_LDO1_LMT_THD_1000 (0x01<<2)
+#define RTS5228_LDO1_LMT_THD_1500 (0x02<<2)
+#define RTS5228_LDO1_LMT_THD_2000 (0x03<<2)
+
+#define RTS5228_LDO1_CFG1 0xFF73
+#define RTS5228_LDO1_SR_TIME_MASK (0x03<<6)
+#define RTS5228_LDO1_SR_0_0 (0x00<<6)
+#define RTS5228_LDO1_SR_0_25 (0x01<<6)
+#define RTS5228_LDO1_SR_0_5 (0x02<<6)
+#define RTS5228_LDO1_SR_1_0 (0x03<<6)
+#define RTS5228_LDO1_TUNE_MASK (0x07<<1)
+#define RTS5228_LDO1_18 (0x05<<1)
+#define RTS5228_LDO1_33 (0x07<<1)
+#define RTS5228_LDO1_PWD_MASK (0x01<<0)
+
+#define RTS5228_AUXCLK_GAT_CTL 0xFF74
+
+#define RTS5228_REG_RREF_CTL_0 0xFF75
+#define RTS5228_FORCE_RREF_EXTL (0x01<<7)
+#define RTS5228_REG_BG33_MASK (0x07<<0)
+#define RTS5228_RREF_12_1V (0x04<<0)
+#define RTS5228_RREF_12_3V (0x05<<0)
+
+#define RTS5228_REG_RREF_CTL_1 0xFF76
+
+#define RTS5228_REG_RREF_CTL_2 0xFF77
+#define RTS5228_TEST_INTL_RREF (0x01<<7)
+#define RTS5228_DGLCH_TIME_MASK (0x03<<5)
+#define RTS5228_DGLCH_TIME_50 (0x00<<5)
+#define RTS5228_DGLCH_TIME_75 (0x01<<5)
+#define RTS5228_DGLCH_TIME_100 (0x02<<5)
+#define RTS5228_DGLCH_TIME_125 (0x03<<5)
+#define RTS5228_REG_REXT_TUNE_MASK (0x1F<<0)
+
+#define RTS5228_REG_PME_FORCE_CTL 0xFF78
+#define FORCE_PM_CONTROL 0x20
+#define FORCE_PM_VALUE 0x10
+
+
+/* Single LUN, support SD */
+#define DEFAULT_SINGLE 0
+#define SD_LUN 1
+
+
+/* For Change_FPGA_SSCClock Function */
+#define MULTIPLY_BY_1 0x00
+#define MULTIPLY_BY_2 0x01
+#define MULTIPLY_BY_3 0x02
+#define MULTIPLY_BY_4 0x03
+#define MULTIPLY_BY_5 0x04
+#define MULTIPLY_BY_6 0x05
+#define MULTIPLY_BY_7 0x06
+#define MULTIPLY_BY_8 0x07
+#define MULTIPLY_BY_9 0x08
+#define MULTIPLY_BY_10 0x09
+
+#define DIVIDE_BY_2 0x01
+#define DIVIDE_BY_3 0x02
+#define DIVIDE_BY_4 0x03
+#define DIVIDE_BY_5 0x04
+#define DIVIDE_BY_6 0x05
+#define DIVIDE_BY_7 0x06
+#define DIVIDE_BY_8 0x07
+#define DIVIDE_BY_9 0x08
+#define DIVIDE_BY_10 0x09
+
+int rts5228_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
+ u8 ssc_depth, bool initial_mode, bool double_clk, bool vpclk);
+
+#endif /* RTS5228_H */
diff --git a/drivers/misc/cardreader/rts5229.c b/drivers/misc/cardreader/rts5229.c
index 9f080a32ef50..89e6f124ca5c 100644
--- a/drivers/misc/cardreader/rts5229.c
+++ b/drivers/misc/cardreader/rts5229.c
@@ -23,9 +23,10 @@ static u8 rts5229_get_ic_version(struct rtsx_pcr *pcr)
static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg))
@@ -37,7 +38,7 @@ static void rts5229_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 =
map_sd_drive(rtsx_reg_to_sd30_drive_sel_3v3(reg));
diff --git a/drivers/misc/cardreader/rts5249.c b/drivers/misc/cardreader/rts5249.c
index 6c6c9e95a29f..941b3d77f1e9 100644
--- a/drivers/misc/cardreader/rts5249.c
+++ b/drivers/misc/cardreader/rts5249.c
@@ -55,9 +55,10 @@ static void rts5249_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg)) {
@@ -70,7 +71,7 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
@@ -93,32 +94,33 @@ static void rtsx_base_force_power_down(struct rtsx_pcr *pcr, u8 pm_state)
static void rts5249_init_from_cfg(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
+ int l1ss;
struct rtsx_cr_option *option = &(pcr->option);
u32 lval;
- if (CHK_PCI_PID(pcr, PID_524A))
- rtsx_pci_read_config_dword(pcr,
- PCR_ASPM_SETTING_REG1, &lval);
- else
- rtsx_pci_read_config_dword(pcr,
- PCR_ASPM_SETTING_REG2, &lval);
+ l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+ if (!l1ss)
+ return;
+
+ pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
- if (lval & ASPM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
- if (lval & ASPM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
- if (lval & PM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
rtsx_set_dev_flag(pcr, PM_L1_1_EN);
- if (lval & PM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
rtsx_set_dev_flag(pcr, PM_L1_2_EN);
if (option->ltr_en) {
u16 val;
- pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val);
if (val & PCI_EXP_DEVCTL2_LTR_EN) {
option->ltr_enabled = true;
option->ltr_active = true;
diff --git a/drivers/misc/cardreader/rts5260.c b/drivers/misc/cardreader/rts5260.c
index 7a9dbb778e84..b9f66b1384a6 100644
--- a/drivers/misc/cardreader/rts5260.c
+++ b/drivers/misc/cardreader/rts5260.c
@@ -64,9 +64,10 @@ static void rts5260_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
if (!rtsx_vendor_setting_valid(reg)) {
@@ -79,7 +80,7 @@ static void rtsx_base_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->card_drive_sel &= 0x3F;
pcr->card_drive_sel |= rtsx_reg_to_card_drive_sel(reg);
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
pcr->sd30_drive_sel_3v3 = rtsx_reg_to_sd30_drive_sel_3v3(reg);
if (rtsx_reg_check_reverse_socket(reg))
@@ -496,21 +497,27 @@ static void rts5260_pwr_saving_setting(struct rtsx_pcr *pcr)
static void rts5260_init_from_cfg(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
+ int l1ss;
struct rtsx_cr_option *option = &pcr->option;
u32 lval;
- rtsx_pci_read_config_dword(pcr, PCR_ASPM_SETTING_5260, &lval);
+ l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+ if (!l1ss)
+ return;
+
+ pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
- if (lval & ASPM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
- if (lval & ASPM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
- if (lval & PM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
rtsx_set_dev_flag(pcr, PM_L1_1_EN);
- if (lval & PM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
rtsx_set_dev_flag(pcr, PM_L1_2_EN);
rts5260_pwr_saving_setting(pcr);
@@ -518,7 +525,7 @@ static void rts5260_init_from_cfg(struct rtsx_pcr *pcr)
if (option->ltr_en) {
u16 val;
- pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val);
if (val & PCI_EXP_DEVCTL2_LTR_EN) {
option->ltr_enabled = true;
option->ltr_active = true;
diff --git a/drivers/misc/cardreader/rts5261.c b/drivers/misc/cardreader/rts5261.c
index 195822ec858e..471961487ff8 100644
--- a/drivers/misc/cardreader/rts5261.c
+++ b/drivers/misc/cardreader/rts5261.c
@@ -59,9 +59,11 @@ static void rts5261_fill_driving(struct rtsx_pcr *pcr, u8 voltage)
static void rtsx5261_fetch_vendor_settings(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
u32 reg;
+
/* 0x814~0x817 */
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG2, reg);
if (!rts5261_vendor_setting_valid(reg)) {
@@ -76,7 +78,7 @@ static void rtsx5261_fetch_vendor_settings(struct rtsx_pcr *pcr)
pcr->flags |= PCR_REVERSE_SOCKET;
/* 0x724~0x727 */
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG1, &reg);
+ pci_read_config_dword(pdev, PCR_SETTING_REG1, &reg);
pcr_dbg(pcr, "Cfg 0x%x: 0x%x\n", PCR_SETTING_REG1, reg);
pcr->aspm_en = rts5261_reg_to_aspm(reg);
@@ -361,6 +363,7 @@ static void rts5261_process_ocp(struct rtsx_pcr *pcr)
static int rts5261_init_from_hw(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
int retval;
u32 lval, i;
u8 valid, efuse_valid, tmp;
@@ -386,8 +389,7 @@ static int rts5261_init_from_hw(struct rtsx_pcr *pcr)
pcr_dbg(pcr, "Load efuse valid: 0x%x\n", efuse_valid);
if (efuse_valid == 0) {
- retval = rtsx_pci_read_config_dword(pcr,
- PCR_SETTING_REG2, &lval);
+ retval = pci_read_config_dword(pdev, PCR_SETTING_REG2, &lval);
if (retval != 0)
pcr_dbg(pcr, "read 0x814 DW fail\n");
pcr_dbg(pcr, "DW from 0x814: 0x%x\n", lval);
@@ -399,9 +401,9 @@ static int rts5261_init_from_hw(struct rtsx_pcr *pcr)
REG_EFUSE_POR, 0);
pcr_dbg(pcr, "Disable efuse por!\n");
- rtsx_pci_read_config_dword(pcr, PCR_SETTING_REG2, &lval);
+ pci_read_config_dword(pdev, PCR_SETTING_REG2, &lval);
lval = lval & 0x00FFFFFF;
- retval = rtsx_pci_write_config_dword(pcr, PCR_SETTING_REG2, lval);
+ retval = pci_write_config_dword(pdev, PCR_SETTING_REG2, lval);
if (retval != 0)
pcr_dbg(pcr, "write config fail\n");
@@ -410,27 +412,33 @@ static int rts5261_init_from_hw(struct rtsx_pcr *pcr)
static void rts5261_init_from_cfg(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
+ int l1ss;
u32 lval;
struct rtsx_cr_option *option = &pcr->option;
- rtsx_pci_read_config_dword(pcr, PCR_ASPM_SETTING_REG1, &lval);
+ l1ss = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_L1SS);
+ if (!l1ss)
+ return;
+
+ pci_read_config_dword(pdev, l1ss + PCI_L1SS_CTL1, &lval);
- if (lval & ASPM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_1)
rtsx_set_dev_flag(pcr, ASPM_L1_1_EN);
else
rtsx_clear_dev_flag(pcr, ASPM_L1_1_EN);
- if (lval & ASPM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_ASPM_L1_2)
rtsx_set_dev_flag(pcr, ASPM_L1_2_EN);
else
rtsx_clear_dev_flag(pcr, ASPM_L1_2_EN);
- if (lval & PM_L1_1_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_1)
rtsx_set_dev_flag(pcr, PM_L1_1_EN);
else
rtsx_clear_dev_flag(pcr, PM_L1_1_EN);
- if (lval & PM_L1_2_EN_MASK)
+ if (lval & PCI_L1SS_CTL1_PCIPM_L1_2)
rtsx_set_dev_flag(pcr, PM_L1_2_EN);
else
rtsx_clear_dev_flag(pcr, PM_L1_2_EN);
@@ -439,7 +447,7 @@ static void rts5261_init_from_cfg(struct rtsx_pcr *pcr)
if (option->ltr_en) {
u16 val;
- pcie_capability_read_word(pcr->pci, PCI_EXP_DEVCTL2, &val);
+ pcie_capability_read_word(pdev, PCI_EXP_DEVCTL2, &val);
if (val & PCI_EXP_DEVCTL2_LTR_EN) {
option->ltr_enabled = true;
option->ltr_active = true;
diff --git a/drivers/misc/cardreader/rtsx_pcr.c b/drivers/misc/cardreader/rtsx_pcr.c
index 0d5928bc1b6d..37ccc67f4914 100644
--- a/drivers/misc/cardreader/rtsx_pcr.c
+++ b/drivers/misc/cardreader/rtsx_pcr.c
@@ -23,6 +23,7 @@
#include "rtsx_pcr.h"
#include "rts5261.h"
+#include "rts5228.h"
static bool msi_en = true;
module_param(msi_en, bool, S_IRUGO | S_IWUSR);
@@ -50,6 +51,7 @@ static const struct pci_device_id rtsx_pci_ids[] = {
{ PCI_DEVICE(0x10EC, 0x525A), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5260), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ PCI_DEVICE(0x10EC, 0x5261), PCI_CLASS_OTHERS << 16, 0xFF0000 },
+ { PCI_DEVICE(0x10EC, 0x5228), PCI_CLASS_OTHERS << 16, 0xFF0000 },
{ 0, }
};
@@ -206,16 +208,10 @@ int __rtsx_pci_write_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 val)
int err, i, finished = 0;
u8 tmp;
- rtsx_pci_init_cmd(pcr);
-
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA0, 0xFF, (u8)val);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYDATA1, 0xFF, (u8)(val >> 8));
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x81);
-
- err = rtsx_pci_send_cmd(pcr, 100);
- if (err < 0)
- return err;
+ rtsx_pci_write_register(pcr, PHYDATA0, 0xFF, (u8)val);
+ rtsx_pci_write_register(pcr, PHYDATA1, 0xFF, (u8)(val >> 8));
+ rtsx_pci_write_register(pcr, PHYADDR, 0xFF, addr);
+ rtsx_pci_write_register(pcr, PHYRWCTL, 0xFF, 0x81);
for (i = 0; i < 100000; i++) {
err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
@@ -247,16 +243,10 @@ int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
{
int err, i, finished = 0;
u16 data;
- u8 *ptr, tmp;
+ u8 tmp, val1, val2;
- rtsx_pci_init_cmd(pcr);
-
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYADDR, 0xFF, addr);
- rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, PHYRWCTL, 0xFF, 0x80);
-
- err = rtsx_pci_send_cmd(pcr, 100);
- if (err < 0)
- return err;
+ rtsx_pci_write_register(pcr, PHYADDR, 0xFF, addr);
+ rtsx_pci_write_register(pcr, PHYRWCTL, 0xFF, 0x80);
for (i = 0; i < 100000; i++) {
err = rtsx_pci_read_register(pcr, PHYRWCTL, &tmp);
@@ -272,17 +262,9 @@ int __rtsx_pci_read_phy_register(struct rtsx_pcr *pcr, u8 addr, u16 *val)
if (!finished)
return -ETIMEDOUT;
- rtsx_pci_init_cmd(pcr);
-
- rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA0, 0, 0);
- rtsx_pci_add_cmd(pcr, READ_REG_CMD, PHYDATA1, 0, 0);
-
- err = rtsx_pci_send_cmd(pcr, 100);
- if (err < 0)
- return err;
-
- ptr = rtsx_pci_get_cmd_data(pcr);
- data = ((u16)ptr[1] << 8) | ptr[0];
+ rtsx_pci_read_register(pcr, PHYDATA0, &val1);
+ rtsx_pci_read_register(pcr, PHYDATA1, &val2);
+ data = val1 | (val2 << 8);
if (val)
*val = data;
@@ -417,7 +399,7 @@ static void rtsx_pci_add_sg_tbl(struct rtsx_pcr *pcr,
if (end)
option |= RTSX_SG_END;
- if (PCI_PID(pcr) == PID_5261) {
+ if ((PCI_PID(pcr) == PID_5261) || (PCI_PID(pcr) == PID_5228)) {
if (len > 0xFFFF)
val = ((u64)addr << 32) | (((u64)len & 0xFFFF) << 16)
| (((u64)len >> 16) << 6) | option;
@@ -723,6 +705,9 @@ int rtsx_pci_switch_clock(struct rtsx_pcr *pcr, unsigned int card_clock,
if (PCI_PID(pcr) == PID_5261)
return rts5261_pci_switch_clock(pcr, card_clock,
ssc_depth, initial_mode, double_clk, vpclk);
+ if (PCI_PID(pcr) == PID_5228)
+ return rts5228_pci_switch_clock(pcr, card_clock,
+ ssc_depth, initial_mode, double_clk, vpclk);
if (initial_mode) {
/* We use 250k(around) here, in initial stage */
@@ -1111,8 +1096,7 @@ static void rtsx_pci_idle_work(struct work_struct *work)
mutex_unlock(&pcr->pcr_mutex);
}
-#ifdef CONFIG_PM
-static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
+static void __maybe_unused rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
{
if (pcr->ops->turn_off_led)
pcr->ops->turn_off_led(pcr);
@@ -1126,7 +1110,6 @@ static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
if (pcr->ops->force_power_down)
pcr->ops->force_power_down(pcr, pm_state);
}
-#endif
void rtsx_pci_enable_ocp(struct rtsx_pcr *pcr)
{
@@ -1202,6 +1185,36 @@ void rtsx_pci_clear_ocpstat(struct rtsx_pcr *pcr)
}
}
+void rtsx_pci_enable_oobs_polling(struct rtsx_pcr *pcr)
+{
+ u16 val;
+
+ if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ rtsx_pci_read_phy_register(pcr, 0x01, &val);
+ val |= 1<<9;
+ rtsx_pci_write_phy_register(pcr, 0x01, val);
+ }
+ rtsx_pci_write_register(pcr, REG_CFG_OOBS_OFF_TIMER, 0xFF, 0x32);
+ rtsx_pci_write_register(pcr, REG_CFG_OOBS_ON_TIMER, 0xFF, 0x05);
+ rtsx_pci_write_register(pcr, REG_CFG_VCM_ON_TIMER, 0xFF, 0x83);
+ rtsx_pci_write_register(pcr, REG_CFG_OOBS_POLLING, 0xFF, 0xDE);
+
+}
+
+void rtsx_pci_disable_oobs_polling(struct rtsx_pcr *pcr)
+{
+ u16 val;
+
+ if ((PCI_PID(pcr) != PID_525A) && (PCI_PID(pcr) != PID_5260)) {
+ rtsx_pci_read_phy_register(pcr, 0x01, &val);
+ val &= ~(1<<9);
+ rtsx_pci_write_phy_register(pcr, 0x01, val);
+ }
+ rtsx_pci_write_register(pcr, REG_CFG_VCM_ON_TIMER, 0xFF, 0x03);
+ rtsx_pci_write_register(pcr, REG_CFG_OOBS_POLLING, 0xFF, 0x00);
+
+}
+
int rtsx_sd_power_off_card3v3(struct rtsx_pcr *pcr)
{
rtsx_pci_write_register(pcr, CARD_CLK_EN, SD_CLK_EN |
@@ -1231,9 +1244,13 @@ int rtsx_ms_power_off_card3v3(struct rtsx_pcr *pcr)
static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
{
+ struct pci_dev *pdev = pcr->pci;
int err;
- pcr->pcie_cap = pci_find_capability(pcr->pci, PCI_CAP_ID_EXP);
+ if (PCI_PID(pcr) == PID_5228)
+ rtsx_pci_write_register(pcr, RTS5228_LDO1_CFG1, RTS5228_LDO1_SR_TIME_MASK,
+ RTS5228_LDO1_SR_0_5);
+
rtsx_pci_writel(pcr, RTSX_HCBAR, pcr->host_cmds_addr);
rtsx_pci_enable_bus_int(pcr);
@@ -1280,6 +1297,9 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
if (PCI_PID(pcr) == PID_5261)
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
RTS5261_SSC_DEPTH_2M);
+ else if (PCI_PID(pcr) == PID_5228)
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF,
+ RTS5228_SSC_DEPTH_2M);
else
rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, SSC_CTL2, 0xFF, 0x12);
@@ -1314,6 +1334,7 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
case PID_525A:
case PID_5260:
case PID_5261:
+ case PID_5228:
rtsx_pci_write_register(pcr, PM_CLK_FORCE_CTL, 1, 1);
break;
default:
@@ -1324,9 +1345,10 @@ static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
rtsx_pci_init_ocp(pcr);
/* Enable clk_request_n to enable clock power management */
- rtsx_pci_write_config_byte(pcr, pcr->pcie_cap + PCI_EXP_LNKCTL + 1, 1);
+ pcie_capability_write_word(pdev, PCI_EXP_LNKCTL,
+ PCI_EXP_LNKCTL_CLKREQ_EN);
/* Enter L1 when host tx idle */
- rtsx_pci_write_config_byte(pcr, 0x70F, 0x5B);
+ pci_write_config_byte(pdev, 0x70F, 0x5B);
if (pcr->ops->extra_init_hw) {
err = pcr->ops->extra_init_hw(pcr);
@@ -1401,6 +1423,10 @@ static int rtsx_pci_init_chip(struct rtsx_pcr *pcr)
case 0x5261:
rts5261_init_params(pcr);
break;
+
+ case 0x5228:
+ rts5228_init_params(pcr);
+ break;
}
pcr_dbg(pcr, "PID: 0x%04x, IC version: 0x%02x\n",
@@ -1604,10 +1630,9 @@ static void rtsx_pci_remove(struct pci_dev *pcidev)
pci_name(pcidev), (int)pcidev->vendor, (int)pcidev->device);
}
-#ifdef CONFIG_PM
-
-static int rtsx_pci_suspend(struct pci_dev *pcidev, pm_message_t state)
+static int __maybe_unused rtsx_pci_suspend(struct device *dev_d)
{
+ struct pci_dev *pcidev = to_pci_dev(dev_d);
struct pcr_handle *handle;
struct rtsx_pcr *pcr;
@@ -1623,17 +1648,15 @@ static int rtsx_pci_suspend(struct pci_dev *pcidev, pm_message_t state)
rtsx_pci_power_off(pcr, HOST_ENTER_S3);
- pci_save_state(pcidev);
- pci_enable_wake(pcidev, pci_choose_state(pcidev, state), 0);
- pci_disable_device(pcidev);
- pci_set_power_state(pcidev, pci_choose_state(pcidev, state));
+ device_wakeup_disable(dev_d);
mutex_unlock(&pcr->pcr_mutex);
return 0;
}
-static int rtsx_pci_resume(struct pci_dev *pcidev)
+static int __maybe_unused rtsx_pci_resume(struct device *dev_d)
{
+ struct pci_dev *pcidev = to_pci_dev(dev_d);
struct pcr_handle *handle;
struct rtsx_pcr *pcr;
int ret = 0;
@@ -1645,13 +1668,6 @@ static int rtsx_pci_resume(struct pci_dev *pcidev)
mutex_lock(&pcr->pcr_mutex);
- pci_set_power_state(pcidev, PCI_D0);
- pci_restore_state(pcidev);
- ret = pci_enable_device(pcidev);
- if (ret)
- goto out;
- pci_set_master(pcidev);
-
ret = rtsx_pci_write_register(pcr, HOST_SLEEP_STATE, 0x03, 0x00);
if (ret)
goto out;
@@ -1667,6 +1683,8 @@ out:
return ret;
}
+#ifdef CONFIG_PM
+
static void rtsx_pci_shutdown(struct pci_dev *pcidev)
{
struct pcr_handle *handle;
@@ -1686,19 +1704,18 @@ static void rtsx_pci_shutdown(struct pci_dev *pcidev)
#else /* CONFIG_PM */
-#define rtsx_pci_suspend NULL
-#define rtsx_pci_resume NULL
#define rtsx_pci_shutdown NULL
#endif /* CONFIG_PM */
+static SIMPLE_DEV_PM_OPS(rtsx_pci_pm_ops, rtsx_pci_suspend, rtsx_pci_resume);
+
static struct pci_driver rtsx_pci_driver = {
.name = DRV_NAME_RTSX_PCI,
.id_table = rtsx_pci_ids,
.probe = rtsx_pci_probe,
.remove = rtsx_pci_remove,
- .suspend = rtsx_pci_suspend,
- .resume = rtsx_pci_resume,
+ .driver.pm = &rtsx_pci_pm_ops,
.shutdown = rtsx_pci_shutdown,
};
module_pci_driver(rtsx_pci_driver);
diff --git a/drivers/misc/cardreader/rtsx_pcr.h b/drivers/misc/cardreader/rtsx_pcr.h
index 024cbd998b2a..6b322db8738e 100644
--- a/drivers/misc/cardreader/rtsx_pcr.h
+++ b/drivers/misc/cardreader/rtsx_pcr.h
@@ -53,6 +53,7 @@ void rts525a_init_params(struct rtsx_pcr *pcr);
void rtl8411b_init_params(struct rtsx_pcr *pcr);
void rts5260_init_params(struct rtsx_pcr *pcr);
void rts5261_init_params(struct rtsx_pcr *pcr);
+void rts5228_init_params(struct rtsx_pcr *pcr);
static inline u8 map_sd_drive(int idx)
{
@@ -70,6 +71,8 @@ static inline u8 map_sd_drive(int idx)
#define rts5209_vendor_setting1_valid(reg) (!((reg) & 0x80))
#define rts5209_vendor_setting2_valid(reg) ((reg) & 0x80)
+#define rtsx_check_mmc_support(reg) ((reg) & 0x10)
+#define rtsx_reg_to_rtd3(reg) ((reg) & 0x02)
#define rtsx_reg_to_aspm(reg) (((reg) >> 28) & 0x03)
#define rtsx_reg_to_sd30_drive_sel_1v8(reg) (((reg) >> 26) & 0x03)
#define rtsx_reg_to_sd30_drive_sel_3v3(reg) (((reg) >> 5) & 0x03)
@@ -100,6 +103,8 @@ void rtsx_pci_disable_ocp(struct rtsx_pcr *pcr);
void rtsx_pci_enable_ocp(struct rtsx_pcr *pcr);
int rtsx_pci_get_ocpstat(struct rtsx_pcr *pcr, u8 *val);
void rtsx_pci_clear_ocpstat(struct rtsx_pcr *pcr);
+void rtsx_pci_enable_oobs_polling(struct rtsx_pcr *pcr);
+void rtsx_pci_disable_oobs_polling(struct rtsx_pcr *pcr);
int rtsx_sd_power_off_card3v3(struct rtsx_pcr *pcr);
int rtsx_ms_power_off_card3v3(struct rtsx_pcr *pcr);
diff --git a/drivers/misc/cardreader/rtsx_usb.c b/drivers/misc/cardreader/rtsx_usb.c
index a328cab11014..59eda55d92a3 100644
--- a/drivers/misc/cardreader/rtsx_usb.c
+++ b/drivers/misc/cardreader/rtsx_usb.c
@@ -759,7 +759,7 @@ static int rtsx_usb_post_reset(struct usb_interface *intf)
return 0;
}
-static struct usb_device_id rtsx_usb_usb_ids[] = {
+static const struct usb_device_id rtsx_usb_usb_ids[] = {
{ USB_DEVICE(0x0BDA, 0x0129) },
{ USB_DEVICE(0x0BDA, 0x0139) },
{ USB_DEVICE(0x0BDA, 0x0140) },
diff --git a/drivers/misc/cb710/core.c b/drivers/misc/cb710/core.c
index b290bc2ee240..55b7ee0e8f93 100644
--- a/drivers/misc/cb710/core.c
+++ b/drivers/misc/cb710/core.c
@@ -166,37 +166,24 @@ void cb710_set_irq_handler(struct cb710_slot *slot,
}
EXPORT_SYMBOL_GPL(cb710_set_irq_handler);
-#ifdef CONFIG_PM
-
-static int cb710_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused cb710_suspend(struct device *dev_d)
{
+ struct pci_dev *pdev = to_pci_dev(dev_d);
struct cb710_chip *chip = pci_get_drvdata(pdev);
devm_free_irq(&pdev->dev, pdev->irq, chip);
- pci_save_state(pdev);
- pci_disable_device(pdev);
- if (state.event & PM_EVENT_SLEEP)
- pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
-static int cb710_resume(struct pci_dev *pdev)
+static int __maybe_unused cb710_resume(struct device *dev_d)
{
+ struct pci_dev *pdev = to_pci_dev(dev_d);
struct cb710_chip *chip = pci_get_drvdata(pdev);
- int err;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- err = pcim_enable_device(pdev);
- if (err)
- return err;
return devm_request_irq(&pdev->dev, pdev->irq,
cb710_irq_handler, IRQF_SHARED, KBUILD_MODNAME, chip);
}
-#endif /* CONFIG_PM */
-
static int cb710_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
{
@@ -312,15 +299,14 @@ static const struct pci_device_id cb710_pci_tbl[] = {
{ 0, }
};
+static SIMPLE_DEV_PM_OPS(cb710_pm_ops, cb710_suspend, cb710_resume);
+
static struct pci_driver cb710_driver = {
.name = KBUILD_MODNAME,
.id_table = cb710_pci_tbl,
.probe = cb710_probe,
.remove = cb710_remove_one,
-#ifdef CONFIG_PM
- .suspend = cb710_suspend,
- .resume = cb710_resume,
-#endif
+ .driver.pm = &cb710_pm_ops,
};
static int __init cb710_init_module(void)
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index dfd2969e3628..e5a4ed3701eb 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -117,6 +117,7 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
/**
* cb710_sg_dwiter_write_next_block() - write next 32-bit word to sg buffer
* @miter: sg mapping iterator used for writing
+ * @data: data to write to sg buffer
*
* Description:
* Writes 32-bit word starting at byte pointed to by @miter@
diff --git a/drivers/misc/cxl/flash.c b/drivers/misc/cxl/flash.c
index cb9cca35a226..5b93ff51d82a 100644
--- a/drivers/misc/cxl/flash.c
+++ b/drivers/misc/cxl/flash.c
@@ -175,7 +175,7 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
struct update_nodes_workarea *unwa;
u32 action, node_count;
int token, rc, i;
- __be32 *data, drc_index, phandle;
+ __be32 *data, phandle;
char *buf;
token = rtas_token("ibm,update-nodes");
@@ -213,7 +213,7 @@ static int update_devicetree(struct cxl *adapter, s32 scope)
break;
case OPCODE_ADD:
/* nothing to do, just move pointer */
- drc_index = *data++;
+ data++;
break;
}
}
diff --git a/drivers/misc/cxl/hcalls.c b/drivers/misc/cxl/hcalls.c
index b7c57f67f4f5..aba5e20eeb1f 100644
--- a/drivers/misc/cxl/hcalls.c
+++ b/drivers/misc/cxl/hcalls.c
@@ -167,7 +167,7 @@ long cxl_h_attach_process(u64 unit_address,
}
}
-/**
+/*
* cxl_h_detach_process - Detach a process element from a coherent
* platform function.
*/
@@ -197,7 +197,7 @@ long cxl_h_detach_process(u64 unit_address, u64 process_token)
}
}
-/**
+/*
* cxl_h_control_function - This H_CONTROL_CA_FUNCTION hypervisor call allows
* the partition to manipulate or query
* certain coherent platform function behaviors.
@@ -238,7 +238,7 @@ static long cxl_h_control_function(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_reset_afu - Perform a reset to the coherent platform function.
*/
long cxl_h_reset_afu(u64 unit_address)
@@ -249,7 +249,7 @@ long cxl_h_reset_afu(u64 unit_address)
NULL);
}
-/**
+/*
* cxl_h_suspend_process - Suspend a process from being executed
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -262,7 +262,7 @@ long cxl_h_suspend_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_resume_process - Resume a process to be executed
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -275,7 +275,7 @@ long cxl_h_resume_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_read_error_state - Checks the error state of the coherent
* platform function.
* R4 contains the error state
@@ -288,7 +288,7 @@ long cxl_h_read_error_state(u64 unit_address, u64 *state)
state);
}
-/**
+/*
* cxl_h_get_afu_err - collect the AFU error buffer
* Parameter1 = byte offset into error buffer to retrieve, valid values
* are between 0 and (ibm,error-buffer-size - 1)
@@ -304,7 +304,7 @@ long cxl_h_get_afu_err(u64 unit_address, u64 offset,
NULL);
}
-/**
+/*
* cxl_h_get_config - collect configuration record for the
* coherent platform function
* Parameter1 = # of configuration record to retrieve, valid values are
@@ -324,7 +324,7 @@ long cxl_h_get_config(u64 unit_address, u64 cr_num, u64 offset,
NULL);
}
-/**
+/*
* cxl_h_terminate_process - Terminate the process before completion
* Parameter1 = process-token as returned from H_ATTACH_CA_PROCESS when
* process was attached.
@@ -337,7 +337,7 @@ long cxl_h_terminate_process(u64 unit_address, u64 process_token)
NULL);
}
-/**
+/*
* cxl_h_collect_vpd - Collect VPD for the coherent platform function.
* Parameter1 = # of VPD record to retrieve, valid values are between 0
* and (ibm,#config-records - 1).
@@ -355,7 +355,7 @@ long cxl_h_collect_vpd(u64 unit_address, u64 record, u64 list_address,
out);
}
-/**
+/*
* cxl_h_get_fn_error_interrupt - Read the function-wide error data based on an interrupt
*/
long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg)
@@ -365,7 +365,7 @@ long cxl_h_get_fn_error_interrupt(u64 unit_address, u64 *reg)
0, 0, 0, 0, reg);
}
-/**
+/*
* cxl_h_ack_fn_error_interrupt - Acknowledge function-wide error data
* based on an interrupt
* Parameter1 = value to write to the function-wide error interrupt register
@@ -378,7 +378,7 @@ long cxl_h_ack_fn_error_interrupt(u64 unit_address, u64 value)
NULL);
}
-/**
+/*
* cxl_h_get_error_log - Retrieve the Platform Log ID (PLID) of
* an error log
*/
@@ -390,7 +390,7 @@ long cxl_h_get_error_log(u64 unit_address, u64 value)
NULL);
}
-/**
+/*
* cxl_h_collect_int_info - Collect interrupt info about a coherent
* platform function after an interrupt occurred.
*/
@@ -425,7 +425,7 @@ long cxl_h_collect_int_info(u64 unit_address, u64 process_token,
}
}
-/**
+/*
* cxl_h_control_faults - Control the operation of a coherent platform
* function after a fault occurs.
*
@@ -470,7 +470,7 @@ long cxl_h_control_faults(u64 unit_address, u64 process_token,
}
}
-/**
+/*
* cxl_h_control_facility - This H_CONTROL_CA_FACILITY hypervisor call
* allows the partition to manipulate or query
* certain coherent platform facility behaviors.
@@ -509,7 +509,7 @@ static long cxl_h_control_facility(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_reset_adapter - Perform a reset to the coherent platform facility.
*/
long cxl_h_reset_adapter(u64 unit_address)
@@ -520,7 +520,7 @@ long cxl_h_reset_adapter(u64 unit_address)
NULL);
}
-/**
+/*
* cxl_h_collect_vpd - Collect VPD for the coherent platform function.
* Parameter1 = 4K naturally aligned real buffer containing block
* list entries
@@ -536,7 +536,7 @@ long cxl_h_collect_vpd_adapter(u64 unit_address, u64 list_address,
out);
}
-/**
+/*
* cxl_h_download_facility - This H_DOWNLOAD_CA_FACILITY
* hypervisor call provide platform support for
* downloading a base adapter image to the coherent
@@ -616,7 +616,7 @@ static long cxl_h_download_facility(u64 unit_address, u64 op,
}
}
-/**
+/*
* cxl_h_download_adapter_image - Download the base image to the coherent
* platform facility.
*/
@@ -629,7 +629,7 @@ long cxl_h_download_adapter_image(u64 unit_address,
list_address, num, out);
}
-/**
+/*
* cxl_h_validate_adapter_image - Validate the base image in the coherent
* platform facility.
*/
diff --git a/drivers/misc/cxl/sysfs.c b/drivers/misc/cxl/sysfs.c
index f0263d1a1fdf..d97a243ad30c 100644
--- a/drivers/misc/cxl/sysfs.c
+++ b/drivers/misc/cxl/sysfs.c
@@ -624,7 +624,7 @@ static struct afu_config_record *cxl_sysfs_afu_new_cr(struct cxl_afu *afu, int c
rc = kobject_init_and_add(&cr->kobj, &afu_config_record_type,
&afu->dev.kobj, "cr%i", cr->cr);
if (rc)
- goto err;
+ goto err1;
rc = sysfs_create_bin_file(&cr->kobj, &cr->config_attr);
if (rc)
diff --git a/drivers/misc/cxl/vphb.c b/drivers/misc/cxl/vphb.c
index 1cf320e2a415..1264253cc07b 100644
--- a/drivers/misc/cxl/vphb.c
+++ b/drivers/misc/cxl/vphb.c
@@ -150,7 +150,7 @@ static int cxl_pcie_read_config(struct pci_bus *bus, unsigned int devfn,
out:
cxl_afu_configured_put(afu);
- return rc ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
+ return rc ? PCIBIOS_DEVICE_NOT_FOUND : 0;
}
static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
@@ -184,7 +184,7 @@ static int cxl_pcie_write_config(struct pci_bus *bus, unsigned int devfn,
out:
cxl_afu_configured_put(afu);
- return rc ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
+ return rc ? PCIBIOS_SET_FAILED : 0;
}
static struct pci_ops cxl_pcie_pci_ops =
diff --git a/drivers/misc/echo/echo.c b/drivers/misc/echo/echo.c
index 713e92ee27ac..3c4eaba86576 100644
--- a/drivers/misc/echo/echo.c
+++ b/drivers/misc/echo/echo.c
@@ -66,13 +66,13 @@
Path Models", IEEE Transactions on communications, COM-25,
No. 6, June
1977.
- http://www.rowetel.com/images/echo/dual_path_paper.pdf
+ https://www.rowetel.com/images/echo/dual_path_paper.pdf
[2] The classic, very useful paper that tells you how to
actually build a real world echo canceller:
Messerschmitt, Hedberg, Cole, Haoui, Winship, "Digital Voice
Echo Canceller with a TMS320020,
- http://www.rowetel.com/images/echo/spra129.pdf
+ https://www.rowetel.com/images/echo/spra129.pdf
[3] I have written a series of blog posts on this work, here is
Part 1: http://www.rowetel.com/blog/?p=18
@@ -80,7 +80,7 @@
[4] The source code http://svn.rowetel.com/software/oslec/
[5] A nice reference on LMS filters:
- http://en.wikipedia.org/wiki/Least_mean_squares_filter
+ https://en.wikipedia.org/wiki/Least_mean_squares_filter
Credits:
diff --git a/drivers/misc/eeprom/at24.c b/drivers/misc/eeprom/at24.c
index 9ff18d4961ce..2591c21b2b5d 100644
--- a/drivers/misc/eeprom/at24.c
+++ b/drivers/misc/eeprom/at24.c
@@ -225,7 +225,7 @@ static const struct of_device_id at24_of_match[] = {
};
MODULE_DEVICE_TABLE(of, at24_of_match);
-static const struct acpi_device_id at24_acpi_ids[] = {
+static const struct acpi_device_id __maybe_unused at24_acpi_ids[] = {
{ "INT3499", (kernel_ulong_t)&at24_data_INT3499 },
{ "TPF0001", (kernel_ulong_t)&at24_data_24c1024 },
{ /* END OF LIST */ }
diff --git a/drivers/misc/eeprom/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c
index 36a2eb837371..9627294fe3e9 100644
--- a/drivers/misc/eeprom/eeprom_93cx6.c
+++ b/drivers/misc/eeprom/eeprom_93cx6.c
@@ -228,7 +228,7 @@ EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
/**
* eeprom_93cx6_readb - Read a byte from eeprom
* @eeprom: Pointer to eeprom structure
- * @word: Byte index from where we should start reading
+ * @byte: Byte index from where we should start reading
* @data: target pointer where the information will have to be stored
*
* This function will read a byte of the eeprom data
@@ -270,7 +270,7 @@ EXPORT_SYMBOL_GPL(eeprom_93cx6_readb);
* @eeprom: Pointer to eeprom structure
* @byte: Index from where we should start reading
* @data: target pointer where the information will have to be stored
- * @words: Number of bytes that should be read.
+ * @bytes: Number of bytes that should be read.
*
* This function will read all requested bytes from the eeprom,
* this is done by calling eeprom_93cx6_readb() multiple times.
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 3c2d405bc79b..f950d0155876 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -103,7 +103,9 @@ EXPORT_SYMBOL_GPL(enclosure_for_each_device);
* enclosure_register - register device as an enclosure
*
* @dev: device containing the enclosure
+ * @name: chosen device name
* @components: number of components in the enclosure
+ * @cb: platform call-backs
*
* This sets up the device for being an enclosure. Note that @dev does
* not have to be a dedicated enclosure device. It may be some other type
@@ -266,7 +268,7 @@ static const struct attribute_group *enclosure_component_groups[];
/**
* enclosure_component_alloc - prepare a new enclosure component
* @edev: the enclosure to add the component
- * @num: the device number
+ * @number: the device number
* @type: the type of component being added
* @name: an optional name to appear in sysfs (leave NULL if none)
*
@@ -347,7 +349,7 @@ EXPORT_SYMBOL_GPL(enclosure_component_register);
/**
* enclosure_add_device - add a device as being part of an enclosure
* @edev: the enclosure device being added to.
- * @num: the number of the component
+ * @component: the number of the component
* @dev: the device being added
*
* Declares a real device to reside in slot (or identifier) @num of an
@@ -389,7 +391,7 @@ EXPORT_SYMBOL_GPL(enclosure_add_device);
/**
* enclosure_remove_device - remove a device from an enclosure
* @edev: the enclosure device
- * @num: the number of the component to remove
+ * @dev: device to remove/put
*
* Returns zero on success or an error.
*
diff --git a/drivers/misc/genwqe/card_base.c b/drivers/misc/genwqe/card_base.c
index 1dc6c7c5cbce..acc459fc8105 100644
--- a/drivers/misc/genwqe/card_base.c
+++ b/drivers/misc/genwqe/card_base.c
@@ -165,6 +165,7 @@ static void genwqe_dev_free(struct genwqe_dev *cd)
/**
* genwqe_bus_reset() - Card recovery
+ * @cd: GenWQE device information
*
* pci_reset_function() will recover the device and ensure that the
* registers are accessible again when it completes with success. If
@@ -262,6 +263,7 @@ static void genwqe_tweak_hardware(struct genwqe_dev *cd)
/**
* genwqe_recovery_on_fatal_gfir_required() - Version depended actions
+ * @cd: GenWQE device information
*
* Bitstreams older than 2013-02-17 have a bug where fatal GFIRs must
* be ignored. This is e.g. true for the bitstream we gave to the card
@@ -280,6 +282,7 @@ int genwqe_flash_readback_fails(struct genwqe_dev *cd)
/**
* genwqe_T_psec() - Calculate PF/VF timeout register content
+ * @cd: GenWQE device information
*
* Note: From a design perspective it turned out to be a bad idea to
* use codes here to specifiy the frequency/speed values. An old
@@ -303,6 +306,7 @@ static int genwqe_T_psec(struct genwqe_dev *cd)
/**
* genwqe_setup_pf_jtimer() - Setup PF hardware timeouts for DDCB execution
+ * @cd: GenWQE device information
*
* Do this _after_ card_reset() is called. Otherwise the values will
* vanish. The settings need to be done when the queues are inactive.
@@ -329,6 +333,7 @@ static bool genwqe_setup_pf_jtimer(struct genwqe_dev *cd)
/**
* genwqe_setup_vf_jtimer() - Setup VF hardware timeouts for DDCB execution
+ * @cd: GenWQE device information
*/
static bool genwqe_setup_vf_jtimer(struct genwqe_dev *cd)
{
@@ -543,6 +548,7 @@ static int genwqe_start(struct genwqe_dev *cd)
/**
* genwqe_stop() - Stop card operation
+ * @cd: GenWQE device information
*
* Recovery notes:
* As long as genwqe_thread runs we might access registers during
@@ -569,6 +575,8 @@ static int genwqe_stop(struct genwqe_dev *cd)
/**
* genwqe_recover_card() - Try to recover the card if it is possible
+ * @cd: GenWQE device information
+ * @fatal_err: Indicate whether to attempt soft reset
*
* If fatal_err is set no register access is possible anymore. It is
* likely that genwqe_start fails in that situation. Proper error
@@ -618,6 +626,7 @@ static int genwqe_health_check_cond(struct genwqe_dev *cd, u64 *gfir)
/**
* genwqe_fir_checking() - Check the fault isolation registers of the card
+ * @cd: GenWQE device information
*
* If this code works ok, can be tried out with help of the genwqe_poke tool:
* sudo ./tools/genwqe_poke 0x8 0xfefefefefef
@@ -762,6 +771,7 @@ static u64 genwqe_fir_checking(struct genwqe_dev *cd)
/**
* genwqe_pci_fundamental_reset() - trigger a PCIe fundamental reset on the slot
+ * @pci_dev: PCI device information struct
*
* Note: pci_set_pcie_reset_state() is not implemented on all archs, so this
* reset method will not work in all cases.
@@ -826,8 +836,9 @@ static int genwqe_platform_recovery(struct genwqe_dev *cd)
return rc;
}
-/*
+/**
* genwqe_reload_bistream() - reload card bitstream
+ * @cd: GenWQE device information
*
* Set the appropriate register and call fundamental reset to reaload the card
* bitstream.
@@ -880,6 +891,7 @@ static int genwqe_reload_bistream(struct genwqe_dev *cd)
/**
* genwqe_health_thread() - Health checking thread
+ * @data: GenWQE device information
*
* This thread is only started for the PF of the card.
*
@@ -1043,18 +1055,17 @@ static int genwqe_health_thread_running(struct genwqe_dev *cd)
static int genwqe_health_check_stop(struct genwqe_dev *cd)
{
- int rc;
-
if (!genwqe_health_thread_running(cd))
return -EIO;
- rc = kthread_stop(cd->health_thread);
+ kthread_stop(cd->health_thread);
cd->health_thread = NULL;
return 0;
}
/**
* genwqe_pci_setup() - Allocate PCIe related resources for our card
+ * @cd: GenWQE device information
*/
static int genwqe_pci_setup(struct genwqe_dev *cd)
{
@@ -1140,6 +1151,7 @@ static int genwqe_pci_setup(struct genwqe_dev *cd)
/**
* genwqe_pci_remove() - Free PCIe related resources for our card
+ * @cd: GenWQE device information
*/
static void genwqe_pci_remove(struct genwqe_dev *cd)
{
@@ -1154,7 +1166,8 @@ static void genwqe_pci_remove(struct genwqe_dev *cd)
/**
* genwqe_probe() - Device initialization
- * @pdev: PCI device information struct
+ * @pci_dev: PCI device information struct
+ * @id: PCI device ID
*
* Callable for multiple cards. This function is called on bind.
*
@@ -1214,6 +1227,7 @@ static int genwqe_probe(struct pci_dev *pci_dev,
/**
* genwqe_remove() - Called when device is removed (hot-plugable)
+ * @pci_dev: PCI device information struct
*
* Or when driver is unloaded respecitively when unbind is done.
*/
@@ -1233,8 +1247,10 @@ static void genwqe_remove(struct pci_dev *pci_dev)
genwqe_dev_free(cd);
}
-/*
+/**
* genwqe_err_error_detected() - Error detection callback
+ * @pci_dev: PCI device information struct
+ * @state: PCI channel state
*
* This callback is called by the PCI subsystem whenever a PCI bus
* error is detected.
@@ -1324,7 +1340,7 @@ static int genwqe_sriov_configure(struct pci_dev *dev, int numvfs)
return 0;
}
-static struct pci_error_handlers genwqe_err_handler = {
+static const struct pci_error_handlers genwqe_err_handler = {
.error_detected = genwqe_err_error_detected,
.mmio_enabled = genwqe_err_result_none,
.slot_reset = genwqe_err_slot_reset,
@@ -1342,6 +1358,8 @@ static struct pci_driver genwqe_driver = {
/**
* genwqe_devnode() - Set default access mode for genwqe devices.
+ * @dev: Pointer to device (unused)
+ * @mode: Carrier to pass-back given mode (permissions)
*
* Default mode should be rw for everybody. Do not change default
* device name.
diff --git a/drivers/misc/genwqe/card_ddcb.c b/drivers/misc/genwqe/card_ddcb.c
index 905106579935..0db4000dedf2 100644
--- a/drivers/misc/genwqe/card_ddcb.c
+++ b/drivers/misc/genwqe/card_ddcb.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* IBM Accelerator Family 'GenWQE'
*
* (C) Copyright IBM Corp. 2013
@@ -244,10 +244,13 @@ static int ddcb_requ_finished(struct genwqe_dev *cd, struct ddcb_requ *req)
(cd->card_state != GENWQE_CARD_USED);
}
+#define RET_DDCB_APPENDED 1
+#define RET_DDCB_TAPPED 2
/**
* enqueue_ddcb() - Enqueue a DDCB
* @cd: pointer to genwqe device descriptor
* @queue: queue this operation should be done on
+ * @pddcb: pointer to ddcb structure
* @ddcb_no: pointer to ddcb number being tapped
*
* Start execution of DDCB by tapping or append to queue via NEXT
@@ -259,9 +262,6 @@ static int ddcb_requ_finished(struct genwqe_dev *cd, struct ddcb_requ *req)
* Return: 1 if new DDCB is appended to previous
* 2 if DDCB queue is tapped via register/simulation
*/
-#define RET_DDCB_APPENDED 1
-#define RET_DDCB_TAPPED 2
-
static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue,
struct ddcb *pddcb, int ddcb_no)
{
@@ -316,6 +316,8 @@ static int enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_queue *queue,
/**
* copy_ddcb_results() - Copy output state from real DDCB to request
+ * @req: pointer to requsted DDCB parameters
+ * @ddcb_no: pointer to ddcb number being tapped
*
* Copy DDCB ASV to request struct. There is no endian
* conversion made, since data structure in ASV is still
@@ -356,6 +358,7 @@ static void copy_ddcb_results(struct ddcb_requ *req, int ddcb_no)
/**
* genwqe_check_ddcb_queue() - Checks DDCB queue for completed work equests.
* @cd: pointer to genwqe device descriptor
+ * @queue: queue to be checked
*
* Return: Number of DDCBs which were finished
*/
@@ -553,6 +556,8 @@ int __genwqe_wait_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req)
/**
* get_next_ddcb() - Get next available DDCB
* @cd: pointer to genwqe device descriptor
+ * @queue: DDCB queue
+ * @num: internal DDCB number
*
* DDCB's content is completely cleared but presets for PRE and
* SEQNUM. This function must only be called when ddcb_lock is held.
@@ -900,7 +905,7 @@ int __genwqe_enqueue_ddcb(struct genwqe_dev *cd, struct ddcb_requ *req,
/**
* __genwqe_execute_raw_ddcb() - Setup and execute DDCB
* @cd: pointer to genwqe device descriptor
- * @req: user provided DDCB request
+ * @cmd: user provided DDCB command
* @f_flags: file mode: blocking, non-blocking
*/
int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd,
@@ -965,6 +970,7 @@ int __genwqe_execute_raw_ddcb(struct genwqe_dev *cd,
/**
* genwqe_next_ddcb_ready() - Figure out if the next DDCB is already finished
+ * @cd: pointer to genwqe device descriptor
*
* We use this as condition for our wait-queue code.
*/
@@ -993,6 +999,7 @@ static int genwqe_next_ddcb_ready(struct genwqe_dev *cd)
/**
* genwqe_ddcbs_in_flight() - Check how many DDCBs are in flight
+ * @cd: pointer to genwqe device descriptor
*
* Keep track on the number of DDCBs which ware currently in the
* queue. This is needed for statistics as well as conditon if we want
@@ -1171,6 +1178,7 @@ static irqreturn_t genwqe_vf_isr(int irq, void *dev_id)
/**
* genwqe_card_thread() - Work thread for the DDCB queue
+ * @data: pointer to genwqe device descriptor
*
* The idea is to check if there are DDCBs in processing. If there are
* some finished DDCBs, we process them and wakeup the
@@ -1299,6 +1307,7 @@ int genwqe_setup_service_layer(struct genwqe_dev *cd)
/**
* queue_wake_up_all() - Handles fatal error case
+ * @cd: pointer to genwqe device descriptor
*
* The PCI device got unusable and we have to stop all pending
* requests as fast as we can. The code after this must purge the
@@ -1323,6 +1332,7 @@ static int queue_wake_up_all(struct genwqe_dev *cd)
/**
* genwqe_finish_queue() - Remove any genwqe devices and user-interfaces
+ * @cd: pointer to genwqe device descriptor
*
* Relies on the pre-condition that there are no users of the card
* device anymore e.g. with open file-descriptors.
diff --git a/drivers/misc/genwqe/card_debugfs.c b/drivers/misc/genwqe/card_debugfs.c
index 1b5b82e65268..491fb4482da2 100644
--- a/drivers/misc/genwqe/card_debugfs.c
+++ b/drivers/misc/genwqe/card_debugfs.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* IBM Accelerator Family 'GenWQE'
*
* (C) Copyright IBM Corp. 2013
diff --git a/drivers/misc/genwqe/card_dev.c b/drivers/misc/genwqe/card_dev.c
index 040a0bda3125..55fc5b80e649 100644
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* IBM Accelerator Family 'GenWQE'
*
* (C) Copyright IBM Corp. 2013
@@ -87,7 +87,7 @@ static int genwqe_del_pin(struct genwqe_file *cfile, struct dma_mapping *m)
* @cfile: Descriptor of opened file
* @u_addr: User virtual address
* @size: Size of buffer
- * @dma_addr: DMA address to be updated
+ * @virt_addr: Virtual address to be updated
*
* Return: Pointer to the corresponding mapping NULL if not found
*/
@@ -144,6 +144,7 @@ static void __genwqe_del_mapping(struct genwqe_file *cfile,
* @u_addr: user virtual address
* @size: size of buffer
* @dma_addr: DMA address to be updated
+ * @virt_addr: Virtual address to be updated
* Return: Pointer to the corresponding mapping NULL if not found
*/
static struct dma_mapping *__genwqe_search_mapping(struct genwqe_file *cfile,
@@ -249,6 +250,8 @@ static void genwqe_remove_pinnings(struct genwqe_file *cfile)
/**
* genwqe_kill_fasync() - Send signal to all processes with open GenWQE files
+ * @cd: GenWQE device information
+ * @sig: Signal to send out
*
* E.g. genwqe_send_signal(cd, SIGIO);
*/
@@ -380,6 +383,7 @@ static void genwqe_vma_open(struct vm_area_struct *vma)
/**
* genwqe_vma_close() - Called each time when vma is unmapped
+ * @vma: VMA area to close
*
* Free memory which got allocated by GenWQE mmap().
*/
@@ -416,6 +420,8 @@ static const struct vm_operations_struct genwqe_vma_ops = {
/**
* genwqe_mmap() - Provide contignous buffers to userspace
+ * @filp: File pointer (unused)
+ * @vma: VMA area to map
*
* We use mmap() to allocate contignous buffers used for DMA
* transfers. After the buffer is allocated we remap it to user-space
@@ -484,16 +490,15 @@ static int genwqe_mmap(struct file *filp, struct vm_area_struct *vma)
return rc;
}
+#define FLASH_BLOCK 0x40000 /* we use 256k blocks */
+
/**
* do_flash_update() - Excute flash update (write image or CVPD)
- * @cd: genwqe device
+ * @cfile: Descriptor of opened file
* @load: details about image load
*
* Return: 0 if successful
*/
-
-#define FLASH_BLOCK 0x40000 /* we use 256k blocks */
-
static int do_flash_update(struct genwqe_file *cfile,
struct genwqe_bitstream *load)
{
@@ -820,6 +825,8 @@ static int genwqe_unpin_mem(struct genwqe_file *cfile, struct genwqe_mem *m)
/**
* ddcb_cmd_cleanup() - Remove dynamically created fixup entries
+ * @cfile: Descriptor of opened file
+ * @req: DDCB work request
*
* Only if there are any. Pinnings are not removed.
*/
@@ -844,6 +851,8 @@ static int ddcb_cmd_cleanup(struct genwqe_file *cfile, struct ddcb_requ *req)
/**
* ddcb_cmd_fixups() - Establish DMA fixups/sglists for user memory references
+ * @cfile: Descriptor of opened file
+ * @req: DDCB work request
*
* Before the DDCB gets executed we need to handle the fixups. We
* replace the user-space addresses with DMA addresses or do
@@ -974,6 +983,8 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
/**
* genwqe_execute_ddcb() - Execute DDCB using userspace address fixups
+ * @cfile: Descriptor of opened file
+ * @cmd: Command identifier (passed from user)
*
* The code will build up the translation tables or lookup the
* contignous memory allocation table to find the right translations
@@ -1339,6 +1350,7 @@ static int genwqe_inform_and_stop_processes(struct genwqe_dev *cd)
/**
* genwqe_device_remove() - Remove genwqe's char device
+ * @cd: GenWQE device information
*
* This function must be called after the client devices are removed
* because it will free the major/minor number range for the genwqe
diff --git a/drivers/misc/genwqe/card_sysfs.c b/drivers/misc/genwqe/card_sysfs.c
index 28a3fb1533f7..b2f115602523 100644
--- a/drivers/misc/genwqe/card_sysfs.c
+++ b/drivers/misc/genwqe/card_sysfs.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* IBM Accelerator Family 'GenWQE'
*
* (C) Copyright IBM Corp. 2013
@@ -129,7 +129,7 @@ static ssize_t base_clock_show(struct device *dev,
}
static DEVICE_ATTR_RO(base_clock);
-/**
+/*
* curr_bitstream_show() - Show the current bitstream id
*
* There is a bug in some old versions of the CPLD which selects the
@@ -156,7 +156,7 @@ static ssize_t curr_bitstream_show(struct device *dev,
}
static DEVICE_ATTR_RO(curr_bitstream);
-/**
+/*
* next_bitstream_show() - Show the next activated bitstream
*
* IO_SLC_CFGREG_SOFTRESET: This register can only be accessed by the PF.
@@ -260,7 +260,7 @@ static struct attribute *genwqe_normal_attributes[] = {
NULL,
};
-/**
+/*
* genwqe_is_visible() - Determine if sysfs attribute should be visible or not
*
* VFs have restricted mmio capabilities, so not all sysfs entries
diff --git a/drivers/misc/genwqe/card_utils.c b/drivers/misc/genwqe/card_utils.c
index 77c21caf2acd..039b923d1d60 100644
--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@@ -1,5 +1,5 @@
// SPDX-License-Identifier: GPL-2.0-only
-/**
+/*
* IBM Accelerator Family 'GenWQE'
*
* (C) Copyright IBM Corp. 2013
@@ -129,6 +129,9 @@ u32 __genwqe_readl(struct genwqe_dev *cd, u64 byte_offs)
/**
* genwqe_read_app_id() - Extract app_id
+ * @cd: genwqe device descriptor
+ * @app_name: carrier used to pass-back name
+ * @len: length of data for name
*
* app_unitcfg need to be filled with valid data first
*/
@@ -183,7 +186,7 @@ void genwqe_init_crc32(void)
* @init: initial crc (0xffffffff at start)
*
* polynomial = x^32 * + x^29 + x^18 + x^14 + x^3 + 1 (0x20044009)
-
+ *
* Example: 4 bytes 0x01 0x02 0x03 0x04 with init=0xffffffff should
* result in a crc32 of 0xf33cb7d3.
*
@@ -277,7 +280,7 @@ static int genwqe_sgl_size(int num_pages)
return roundup(len, PAGE_SIZE);
}
-/**
+/*
* genwqe_alloc_sync_sgl() - Allocate memory for sgl and overlapping pages
*
* Allocates memory for sgl and overlapping pages. Pages which might
@@ -460,6 +463,8 @@ int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
/**
* genwqe_free_sync_sgl() - Free memory for sgl and overlapping pages
+ * @cd: genwqe device descriptor
+ * @sgl: scatter gather list describing user-space memory
*
* After the DMA transfer has been completed we free the memory for
* the sgl and the cached pages. Data is being transferred from cached
@@ -710,6 +715,7 @@ int genwqe_read_softreset(struct genwqe_dev *cd)
/**
* genwqe_set_interrupt_capability() - Configure MSI capability structure
* @cd: pointer to the device
+ * @count: number of vectors to allocate
* Return: 0 if no error
*/
int genwqe_set_interrupt_capability(struct genwqe_dev *cd, int count)
@@ -738,7 +744,7 @@ void genwqe_reset_interrupt_capability(struct genwqe_dev *cd)
* @i: index to desired entry
* @m: maximum possible entries
* @addr: addr which is read
- * @index: index in debug array
+ * @idx: index in debug array
* @val: read value
*/
static int set_reg_idx(struct genwqe_dev *cd, struct genwqe_reg *r,
@@ -818,6 +824,8 @@ int genwqe_read_ffdc_regs(struct genwqe_dev *cd, struct genwqe_reg *regs,
/**
* genwqe_ffdc_buff_size() - Calculates the number of dump registers
+ * @cd: genwqe device descriptor
+ * @uid: unit ID
*/
int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int uid)
{
@@ -871,6 +879,10 @@ int genwqe_ffdc_buff_size(struct genwqe_dev *cd, int uid)
/**
* genwqe_ffdc_buff_read() - Implements LogoutExtendedErrorRegisters procedure
+ * @cd: genwqe device descriptor
+ * @uid: unit ID
+ * @regs: register information
+ * @max_regs: number of register entries
*/
int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int uid,
struct genwqe_reg *regs, unsigned int max_regs)
@@ -956,6 +968,10 @@ int genwqe_ffdc_buff_read(struct genwqe_dev *cd, int uid,
/**
* genwqe_write_vreg() - Write register in virtual window
+ * @cd: genwqe device descriptor
+ * @reg: register (byte) offset within BAR
+ * @val: value to write
+ * @func: PCI virtual function
*
* Note, these registers are only accessible to the PF through the
* VF-window. It is not intended for the VF to access.
@@ -969,6 +985,9 @@ int genwqe_write_vreg(struct genwqe_dev *cd, u32 reg, u64 val, int func)
/**
* genwqe_read_vreg() - Read register in virtual window
+ * @cd: genwqe device descriptor
+ * @reg: register (byte) offset within BAR
+ * @func: PCI virtual function
*
* Note, these registers are only accessible to the PF through the
* VF-window. It is not intended for the VF to access.
@@ -981,6 +1000,7 @@ u64 genwqe_read_vreg(struct genwqe_dev *cd, u32 reg, int func)
/**
* genwqe_base_clock_frequency() - Deteremine base clock frequency of the card
+ * @cd: genwqe device descriptor
*
* Note: From a design perspective it turned out to be a bad idea to
* use codes here to specifiy the frequency/speed values. An old
@@ -1005,6 +1025,7 @@ int genwqe_base_clock_frequency(struct genwqe_dev *cd)
/**
* genwqe_stop_traps() - Stop traps
+ * @cd: genwqe device descriptor
*
* Before reading out the analysis data, we need to stop the traps.
*/
@@ -1015,6 +1036,7 @@ void genwqe_stop_traps(struct genwqe_dev *cd)
/**
* genwqe_start_traps() - Start traps
+ * @cd: genwqe device descriptor
*
* After having read the data, we can/must enable the traps again.
*/
diff --git a/drivers/misc/habanalabs/Makefile b/drivers/misc/habanalabs/Makefile
index 421ebd903069..a786c0a7de9a 100644
--- a/drivers/misc/habanalabs/Makefile
+++ b/drivers/misc/habanalabs/Makefile
@@ -3,16 +3,15 @@
# Makefile for HabanaLabs AI accelerators driver
#
-obj-m := habanalabs.o
+obj-$(CONFIG_HABANA_AI) := habanalabs.o
-habanalabs-y := habanalabs_drv.o device.o context.o asid.o habanalabs_ioctl.o \
- command_buffer.o hw_queue.o irq.o sysfs.o hwmon.o memory.o \
- command_submission.o mmu.o firmware_if.o pci.o
-
-habanalabs-$(CONFIG_DEBUG_FS) += debugfs.o
+include $(src)/common/Makefile
+habanalabs-y += $(HL_COMMON_FILES)
include $(src)/goya/Makefile
habanalabs-y += $(HL_GOYA_FILES)
include $(src)/gaudi/Makefile
habanalabs-y += $(HL_GAUDI_FILES)
+
+habanalabs-$(CONFIG_DEBUG_FS) += common/debugfs.o
diff --git a/drivers/misc/habanalabs/common/Makefile b/drivers/misc/habanalabs/common/Makefile
new file mode 100644
index 000000000000..b984bfa4face
--- /dev/null
+++ b/drivers/misc/habanalabs/common/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0-only
+HL_COMMON_FILES := common/habanalabs_drv.o common/device.o common/context.o \
+ common/asid.o common/habanalabs_ioctl.o \
+ common/command_buffer.o common/hw_queue.o common/irq.o \
+ common/sysfs.o common/hwmon.o common/memory.o \
+ common/command_submission.o common/mmu.o common/firmware_if.o \
+ common/pci.o
diff --git a/drivers/misc/habanalabs/asid.c b/drivers/misc/habanalabs/common/asid.c
index a2fdf31cf27c..a2fdf31cf27c 100644
--- a/drivers/misc/habanalabs/asid.c
+++ b/drivers/misc/habanalabs/common/asid.c
diff --git a/drivers/misc/habanalabs/command_buffer.c b/drivers/misc/habanalabs/common/command_buffer.c
index 02d13f71b1df..7c38c4f7f9c0 100644
--- a/drivers/misc/habanalabs/command_buffer.c
+++ b/drivers/misc/habanalabs/common/command_buffer.c
@@ -10,12 +10,18 @@
#include <linux/mm.h>
#include <linux/slab.h>
+#include <linux/genalloc.h>
static void cb_fini(struct hl_device *hdev, struct hl_cb *cb)
{
- hdev->asic_funcs->asic_dma_free_coherent(hdev, cb->size,
- (void *) (uintptr_t) cb->kernel_address,
- cb->bus_address);
+ if (cb->is_internal)
+ gen_pool_free(hdev->internal_cb_pool,
+ cb->kernel_address, cb->size);
+ else
+ hdev->asic_funcs->asic_dma_free_coherent(hdev, cb->size,
+ (void *) (uintptr_t) cb->kernel_address,
+ cb->bus_address);
+
kfree(cb);
}
@@ -44,9 +50,10 @@ static void cb_release(struct kref *ref)
}
static struct hl_cb *hl_cb_alloc(struct hl_device *hdev, u32 cb_size,
- int ctx_id)
+ int ctx_id, bool internal_cb)
{
struct hl_cb *cb;
+ u32 cb_offset;
void *p;
/*
@@ -65,13 +72,25 @@ static struct hl_cb *hl_cb_alloc(struct hl_device *hdev, u32 cb_size,
if (!cb)
return NULL;
- if (ctx_id == HL_KERNEL_ASID_ID)
+ if (internal_cb) {
+ p = (void *) gen_pool_alloc(hdev->internal_cb_pool, cb_size);
+ if (!p) {
+ kfree(cb);
+ return NULL;
+ }
+
+ cb_offset = p - hdev->internal_cb_pool_virt_addr;
+ cb->is_internal = true;
+ cb->bus_address = hdev->internal_cb_va_base + cb_offset;
+ } else if (ctx_id == HL_KERNEL_ASID_ID) {
p = hdev->asic_funcs->asic_dma_alloc_coherent(hdev, cb_size,
&cb->bus_address, GFP_ATOMIC);
- else
+ } else {
p = hdev->asic_funcs->asic_dma_alloc_coherent(hdev, cb_size,
&cb->bus_address,
GFP_USER | __GFP_ZERO);
+ }
+
if (!p) {
dev_err(hdev->dev,
"failed to allocate %d of dma memory for CB\n",
@@ -87,7 +106,7 @@ static struct hl_cb *hl_cb_alloc(struct hl_device *hdev, u32 cb_size,
}
int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
- u32 cb_size, u64 *handle, int ctx_id)
+ u32 cb_size, u64 *handle, int ctx_id, bool internal_cb)
{
struct hl_cb *cb;
bool alloc_new_cb = true;
@@ -112,28 +131,30 @@ int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr,
goto out_err;
}
- /* Minimum allocation must be PAGE SIZE */
- if (cb_size < PAGE_SIZE)
- cb_size = PAGE_SIZE;
-
- if (ctx_id == HL_KERNEL_ASID_ID &&
- cb_size <= hdev->asic_prop.cb_pool_cb_size) {
-
- spin_lock(&hdev->cb_pool_lock);
- if (!list_empty(&hdev->cb_pool)) {
- cb = list_first_entry(&hdev->cb_pool, typeof(*cb),
- pool_list);
- list_del(&cb->pool_list);
- spin_unlock(&hdev->cb_pool_lock);
- alloc_new_cb = false;
- } else {
- spin_unlock(&hdev->cb_pool_lock);
- dev_dbg(hdev->dev, "CB pool is empty\n");
+ if (!internal_cb) {
+ /* Minimum allocation must be PAGE SIZE */
+ if (cb_size < PAGE_SIZE)
+ cb_size = PAGE_SIZE;
+
+ if (ctx_id == HL_KERNEL_ASID_ID &&
+ cb_size <= hdev->asic_prop.cb_pool_cb_size) {
+
+ spin_lock(&hdev->cb_pool_lock);
+ if (!list_empty(&hdev->cb_pool)) {
+ cb = list_first_entry(&hdev->cb_pool,
+ typeof(*cb), pool_list);
+ list_del(&cb->pool_list);
+ spin_unlock(&hdev->cb_pool_lock);
+ alloc_new_cb = false;
+ } else {
+ spin_unlock(&hdev->cb_pool_lock);
+ dev_dbg(hdev->dev, "CB pool is empty\n");
+ }
}
}
if (alloc_new_cb) {
- cb = hl_cb_alloc(hdev, cb_size, ctx_id);
+ cb = hl_cb_alloc(hdev, cb_size, ctx_id, internal_cb);
if (!cb) {
rc = -ENOMEM;
goto out_err;
@@ -229,8 +250,8 @@ int hl_cb_ioctl(struct hl_fpriv *hpriv, void *data)
rc = -EINVAL;
} else {
rc = hl_cb_create(hdev, &hpriv->cb_mgr,
- args->in.cb_size, &handle,
- hpriv->ctx->asid);
+ args->in.cb_size, &handle,
+ hpriv->ctx->asid, false);
}
memset(args, 0, sizeof(*args));
@@ -398,14 +419,15 @@ void hl_cb_mgr_fini(struct hl_device *hdev, struct hl_cb_mgr *mgr)
idr_destroy(&mgr->cb_handles);
}
-struct hl_cb *hl_cb_kernel_create(struct hl_device *hdev, u32 cb_size)
+struct hl_cb *hl_cb_kernel_create(struct hl_device *hdev, u32 cb_size,
+ bool internal_cb)
{
u64 cb_handle;
struct hl_cb *cb;
int rc;
rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, cb_size, &cb_handle,
- HL_KERNEL_ASID_ID);
+ HL_KERNEL_ASID_ID, internal_cb);
if (rc) {
dev_err(hdev->dev,
"Failed to allocate CB for the kernel driver %d\n", rc);
@@ -437,7 +459,7 @@ int hl_cb_pool_init(struct hl_device *hdev)
for (i = 0 ; i < hdev->asic_prop.cb_pool_cb_cnt ; i++) {
cb = hl_cb_alloc(hdev, hdev->asic_prop.cb_pool_cb_size,
- HL_KERNEL_ASID_ID);
+ HL_KERNEL_ASID_ID, false);
if (cb) {
cb->is_pool = true;
list_add(&cb->pool_list, &hdev->cb_pool);
diff --git a/drivers/misc/habanalabs/command_submission.c b/drivers/misc/habanalabs/common/command_submission.c
index f3a8f113865d..b9840e368eb5 100644
--- a/drivers/misc/habanalabs/command_submission.c
+++ b/drivers/misc/habanalabs/common/command_submission.c
@@ -246,6 +246,18 @@ static void free_job(struct hl_device *hdev, struct hl_cs_job *job)
kfree(job);
}
+static void cs_counters_aggregate(struct hl_device *hdev, struct hl_ctx *ctx)
+{
+ hdev->aggregated_cs_counters.device_in_reset_drop_cnt +=
+ ctx->cs_counters.device_in_reset_drop_cnt;
+ hdev->aggregated_cs_counters.out_of_mem_drop_cnt +=
+ ctx->cs_counters.out_of_mem_drop_cnt;
+ hdev->aggregated_cs_counters.parsing_drop_cnt +=
+ ctx->cs_counters.parsing_drop_cnt;
+ hdev->aggregated_cs_counters.queue_full_drop_cnt +=
+ ctx->cs_counters.queue_full_drop_cnt;
+}
+
static void cs_do_release(struct kref *ref)
{
struct hl_cs *cs = container_of(ref, struct hl_cs,
@@ -349,13 +361,16 @@ static void cs_do_release(struct kref *ref)
dma_fence_signal(cs->fence);
dma_fence_put(cs->fence);
+ cs_counters_aggregate(hdev, cs->ctx);
+
+ kfree(cs->jobs_in_queue_cnt);
kfree(cs);
}
static void cs_timedout(struct work_struct *work)
{
struct hl_device *hdev;
- int ctx_asid, rc;
+ int rc;
struct hl_cs *cs = container_of(work, struct hl_cs,
work_tdr.work);
rc = cs_get_unless_zero(cs);
@@ -371,11 +386,10 @@ static void cs_timedout(struct work_struct *work)
cs->timedout = true;
hdev = cs->ctx->hdev;
- ctx_asid = cs->ctx->asid;
- /* TODO: add information about last signaled seq and last emitted seq */
- dev_err(hdev->dev, "User %d command submission %llu got stuck!\n",
- ctx_asid, cs->sequence);
+ dev_err(hdev->dev,
+ "Command submission %llu has not finished in time!\n",
+ cs->sequence);
cs_put(cs);
@@ -418,21 +432,29 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
spin_lock(&ctx->cs_lock);
cs_cmpl->cs_seq = ctx->cs_sequence;
- other = ctx->cs_pending[cs_cmpl->cs_seq & (HL_MAX_PENDING_CS - 1)];
+ other = ctx->cs_pending[cs_cmpl->cs_seq &
+ (hdev->asic_prop.max_pending_cs - 1)];
if ((other) && (!dma_fence_is_signaled(other))) {
- spin_unlock(&ctx->cs_lock);
dev_dbg(hdev->dev,
"Rejecting CS because of too many in-flights CS\n");
rc = -EAGAIN;
goto free_fence;
}
+ cs->jobs_in_queue_cnt = kcalloc(hdev->asic_prop.max_queues,
+ sizeof(*cs->jobs_in_queue_cnt), GFP_ATOMIC);
+ if (!cs->jobs_in_queue_cnt) {
+ rc = -ENOMEM;
+ goto free_fence;
+ }
+
dma_fence_init(&cs_cmpl->base_fence, &hl_fence_ops, &cs_cmpl->lock,
ctx->asid, ctx->cs_sequence);
cs->sequence = cs_cmpl->cs_seq;
- ctx->cs_pending[cs_cmpl->cs_seq & (HL_MAX_PENDING_CS - 1)] =
+ ctx->cs_pending[cs_cmpl->cs_seq &
+ (hdev->asic_prop.max_pending_cs - 1)] =
&cs_cmpl->base_fence;
ctx->cs_sequence++;
@@ -447,6 +469,7 @@ static int allocate_cs(struct hl_device *hdev, struct hl_ctx *ctx,
return 0;
free_fence:
+ spin_unlock(&ctx->cs_lock);
kfree(cs_cmpl);
free_cs:
kfree(cs);
@@ -463,10 +486,12 @@ static void cs_rollback(struct hl_device *hdev, struct hl_cs *cs)
void hl_cs_rollback_all(struct hl_device *hdev)
{
+ int i;
struct hl_cs *cs, *tmp;
/* flush all completions */
- flush_workqueue(hdev->cq_wq);
+ for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++)
+ flush_workqueue(hdev->cq_wq[i]);
/* Make sure we don't have leftovers in the H/W queues mirror list */
list_for_each_entry_safe(cs, tmp, &hdev->hw_queues_mirror_list,
@@ -502,7 +527,7 @@ static int validate_queue_index(struct hl_device *hdev,
/* This must be checked here to prevent out-of-bounds access to
* hw_queues_props array
*/
- if (chunk->queue_index >= HL_MAX_QUEUES) {
+ if (chunk->queue_index >= asic->max_queues) {
dev_err(hdev->dev, "Queue index %d is invalid\n",
chunk->queue_index);
return -EINVAL;
@@ -511,7 +536,7 @@ static int validate_queue_index(struct hl_device *hdev,
hw_queue_prop = &asic->hw_queues_props[chunk->queue_index];
if (hw_queue_prop->type == QUEUE_TYPE_NA) {
- dev_err(hdev->dev, "Queue index %d is not applicable\n",
+ dev_err(hdev->dev, "Queue index %d is invalid\n",
chunk->queue_index);
return -EINVAL;
}
@@ -638,12 +663,15 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
rc = validate_queue_index(hdev, chunk, &queue_type,
&is_kernel_allocated_cb);
- if (rc)
+ if (rc) {
+ hpriv->ctx->cs_counters.parsing_drop_cnt++;
goto free_cs_object;
+ }
if (is_kernel_allocated_cb) {
cb = get_cb_from_cs_chunk(hdev, &hpriv->cb_mgr, chunk);
if (!cb) {
+ hpriv->ctx->cs_counters.parsing_drop_cnt++;
rc = -EINVAL;
goto free_cs_object;
}
@@ -657,6 +685,7 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
job = hl_cs_allocate_job(hdev, queue_type,
is_kernel_allocated_cb);
if (!job) {
+ hpriv->ctx->cs_counters.out_of_mem_drop_cnt++;
dev_err(hdev->dev, "Failed to allocate a new job\n");
rc = -ENOMEM;
if (is_kernel_allocated_cb)
@@ -689,6 +718,7 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
rc = cs_parser(hpriv, job);
if (rc) {
+ hpriv->ctx->cs_counters.parsing_drop_cnt++;
dev_err(hdev->dev,
"Failed to parse JOB %d.%llu.%d, err %d, rejecting the CS\n",
cs->ctx->asid, cs->sequence, job->id, rc);
@@ -697,6 +727,7 @@ static int cs_ioctl_default(struct hl_fpriv *hpriv, void __user *chunks,
}
if (int_queues_only) {
+ hpriv->ctx->cs_counters.parsing_drop_cnt++;
dev_err(hdev->dev,
"Reject CS %d.%llu because only internal queues jobs are present\n",
cs->ctx->asid, cs->sequence);
@@ -746,6 +777,7 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
struct hl_cs_job *job;
struct hl_cs *cs;
struct hl_cb *cb;
+ enum hl_queue_type q_type;
u64 *signal_seq_arr = NULL, signal_seq;
u32 size_to_copy, q_idx, signal_seq_arr_len, cb_size;
int rc;
@@ -778,9 +810,10 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
chunk = &cs_chunk_array[0];
q_idx = chunk->queue_index;
hw_queue_prop = &hdev->asic_prop.hw_queues_props[q_idx];
+ q_type = hw_queue_prop->type;
- if ((q_idx >= HL_MAX_QUEUES) ||
- (hw_queue_prop->type != QUEUE_TYPE_EXT)) {
+ if ((q_idx >= hdev->asic_prop.max_queues) ||
+ (!hw_queue_prop->supports_sync_stream)) {
dev_err(hdev->dev, "Queue index %d is invalid\n", q_idx);
rc = -EINVAL;
goto free_cs_chunk_array;
@@ -877,25 +910,28 @@ static int cs_ioctl_signal_wait(struct hl_fpriv *hpriv, enum hl_cs_type cs_type,
*cs_seq = cs->sequence;
- job = hl_cs_allocate_job(hdev, QUEUE_TYPE_EXT, true);
+ job = hl_cs_allocate_job(hdev, q_type, true);
if (!job) {
+ ctx->cs_counters.out_of_mem_drop_cnt++;
dev_err(hdev->dev, "Failed to allocate a new job\n");
rc = -ENOMEM;
goto put_cs;
}
- cb = hl_cb_kernel_create(hdev, PAGE_SIZE);
+ if (cs->type == CS_TYPE_WAIT)
+ cb_size = hdev->asic_funcs->get_wait_cb_size(hdev);
+ else
+ cb_size = hdev->asic_funcs->get_signal_cb_size(hdev);
+
+ cb = hl_cb_kernel_create(hdev, cb_size,
+ q_type == QUEUE_TYPE_HW && hdev->mmu_enable);
if (!cb) {
+ ctx->cs_counters.out_of_mem_drop_cnt++;
kfree(job);
rc = -EFAULT;
goto put_cs;
}
- if (cs->type == CS_TYPE_WAIT)
- cb_size = hdev->asic_funcs->get_wait_cb_size(hdev);
- else
- cb_size = hdev->asic_funcs->get_signal_cb_size(hdev);
-
job->id = 0;
job->cs = cs;
job->user_cb = cb;
@@ -1134,7 +1170,7 @@ static long _hl_cs_wait_ioctl(struct hl_device *hdev,
rc = PTR_ERR(fence);
if (rc == -EINVAL)
dev_notice_ratelimited(hdev->dev,
- "Can't wait on seq %llu because current CS is at seq %llu\n",
+ "Can't wait on CS %llu because current CS is at seq %llu\n",
seq, ctx->cs_sequence);
} else if (fence) {
rc = dma_fence_wait_timeout(fence, true, timeout);
@@ -1167,15 +1203,21 @@ int hl_cs_wait_ioctl(struct hl_fpriv *hpriv, void *data)
memset(args, 0, sizeof(*args));
if (rc < 0) {
- dev_err_ratelimited(hdev->dev,
- "Error %ld on waiting for CS handle %llu\n",
- rc, seq);
if (rc == -ERESTARTSYS) {
+ dev_err_ratelimited(hdev->dev,
+ "user process got signal while waiting for CS handle %llu\n",
+ seq);
args->out.status = HL_WAIT_CS_STATUS_INTERRUPTED;
rc = -EINTR;
} else if (rc == -ETIMEDOUT) {
+ dev_err_ratelimited(hdev->dev,
+ "CS %llu has timed-out while user process is waiting for it\n",
+ seq);
args->out.status = HL_WAIT_CS_STATUS_TIMEDOUT;
} else if (rc == -EIO) {
+ dev_err_ratelimited(hdev->dev,
+ "CS %llu has been aborted while user process is waiting for it\n",
+ seq);
args->out.status = HL_WAIT_CS_STATUS_ABORTED;
}
return rc;
diff --git a/drivers/misc/habanalabs/context.c b/drivers/misc/habanalabs/common/context.c
index ec92b3506b1f..3e375958e73b 100644
--- a/drivers/misc/habanalabs/context.c
+++ b/drivers/misc/habanalabs/common/context.c
@@ -22,9 +22,11 @@ static void hl_ctx_fini(struct hl_ctx *ctx)
* to this function unless the ref count is 0
*/
- for (i = 0 ; i < HL_MAX_PENDING_CS ; i++)
+ for (i = 0 ; i < hdev->asic_prop.max_pending_cs ; i++)
dma_fence_put(ctx->cs_pending[i]);
+ kfree(ctx->cs_pending);
+
if (ctx->asid != HL_KERNEL_ASID_ID) {
/* The engines are stopped as there is no executing CS, but the
* Coresight might be still working by accessing addresses
@@ -110,8 +112,7 @@ void hl_ctx_free(struct hl_device *hdev, struct hl_ctx *ctx)
return;
dev_warn(hdev->dev,
- "Context %d closed or terminated but its CS are executing\n",
- ctx->asid);
+ "user process released device but its command submissions are still executing\n");
}
int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
@@ -126,34 +127,49 @@ int hl_ctx_init(struct hl_device *hdev, struct hl_ctx *ctx, bool is_kernel_ctx)
spin_lock_init(&ctx->cs_lock);
atomic_set(&ctx->thread_ctx_switch_token, 1);
ctx->thread_ctx_switch_wait_token = 0;
+ ctx->cs_pending = kcalloc(hdev->asic_prop.max_pending_cs,
+ sizeof(struct dma_fence *),
+ GFP_KERNEL);
+ if (!ctx->cs_pending)
+ return -ENOMEM;
if (is_kernel_ctx) {
ctx->asid = HL_KERNEL_ASID_ID; /* Kernel driver gets ASID 0 */
rc = hl_mmu_ctx_init(ctx);
if (rc) {
dev_err(hdev->dev, "Failed to init mmu ctx module\n");
- goto mem_ctx_err;
+ goto err_free_cs_pending;
}
} else {
ctx->asid = hl_asid_alloc(hdev);
if (!ctx->asid) {
dev_err(hdev->dev, "No free ASID, failed to create context\n");
- return -ENOMEM;
+ rc = -ENOMEM;
+ goto err_free_cs_pending;
}
rc = hl_vm_ctx_init(ctx);
if (rc) {
dev_err(hdev->dev, "Failed to init mem ctx module\n");
rc = -ENOMEM;
- goto mem_ctx_err;
+ goto err_asid_free;
+ }
+
+ rc = hdev->asic_funcs->ctx_init(ctx);
+ if (rc) {
+ dev_err(hdev->dev, "ctx_init failed\n");
+ goto err_vm_ctx_fini;
}
}
return 0;
-mem_ctx_err:
- if (ctx->asid != HL_KERNEL_ASID_ID)
- hl_asid_free(hdev, ctx->asid);
+err_vm_ctx_fini:
+ hl_vm_ctx_fini(ctx);
+err_asid_free:
+ hl_asid_free(hdev, ctx->asid);
+err_free_cs_pending:
+ kfree(ctx->cs_pending);
return rc;
}
@@ -170,6 +186,7 @@ int hl_ctx_put(struct hl_ctx *ctx)
struct dma_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
{
+ struct asic_fixed_properties *asic_prop = &ctx->hdev->asic_prop;
struct dma_fence *fence;
spin_lock(&ctx->cs_lock);
@@ -179,13 +196,13 @@ struct dma_fence *hl_ctx_get_fence(struct hl_ctx *ctx, u64 seq)
return ERR_PTR(-EINVAL);
}
- if (seq + HL_MAX_PENDING_CS < ctx->cs_sequence) {
+ if (seq + asic_prop->max_pending_cs < ctx->cs_sequence) {
spin_unlock(&ctx->cs_lock);
return NULL;
}
fence = dma_fence_get(
- ctx->cs_pending[seq & (HL_MAX_PENDING_CS - 1)]);
+ ctx->cs_pending[seq & (asic_prop->max_pending_cs - 1)]);
spin_unlock(&ctx->cs_lock);
return fence;
diff --git a/drivers/misc/habanalabs/debugfs.c b/drivers/misc/habanalabs/common/debugfs.c
index 0bc036e01ee8..c50c6fc9e905 100644
--- a/drivers/misc/habanalabs/debugfs.c
+++ b/drivers/misc/habanalabs/common/debugfs.c
@@ -6,7 +6,7 @@
*/
#include "habanalabs.h"
-#include "include/hw_ip/mmu/mmu_general.h"
+#include "../include/hw_ip/mmu/mmu_general.h"
#include <linux/pci.h>
#include <linux/debugfs.h>
diff --git a/drivers/misc/habanalabs/device.c b/drivers/misc/habanalabs/common/device.c
index 59608d1bac88..be16b75bdfdb 100644
--- a/drivers/misc/habanalabs/device.c
+++ b/drivers/misc/habanalabs/common/device.c
@@ -249,7 +249,8 @@ static void device_cdev_sysfs_del(struct hl_device *hdev)
*/
static int device_early_init(struct hl_device *hdev)
{
- int rc;
+ int i, rc;
+ char workq_name[32];
switch (hdev->asic_type) {
case ASIC_GOYA:
@@ -274,11 +275,24 @@ static int device_early_init(struct hl_device *hdev)
if (rc)
goto early_fini;
- hdev->cq_wq = alloc_workqueue("hl-free-jobs", WQ_UNBOUND, 0);
- if (hdev->cq_wq == NULL) {
- dev_err(hdev->dev, "Failed to allocate CQ workqueue\n");
- rc = -ENOMEM;
- goto asid_fini;
+ if (hdev->asic_prop.completion_queues_count) {
+ hdev->cq_wq = kcalloc(hdev->asic_prop.completion_queues_count,
+ sizeof(*hdev->cq_wq),
+ GFP_ATOMIC);
+ if (!hdev->cq_wq) {
+ rc = -ENOMEM;
+ goto asid_fini;
+ }
+ }
+
+ for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++) {
+ snprintf(workq_name, 32, "hl-free-jobs-%u", i);
+ hdev->cq_wq[i] = create_singlethread_workqueue(workq_name);
+ if (hdev->cq_wq == NULL) {
+ dev_err(hdev->dev, "Failed to allocate CQ workqueue\n");
+ rc = -ENOMEM;
+ goto free_cq_wq;
+ }
}
hdev->eq_wq = alloc_workqueue("hl-events", WQ_UNBOUND, 0);
@@ -321,7 +335,10 @@ free_chip_info:
free_eq_wq:
destroy_workqueue(hdev->eq_wq);
free_cq_wq:
- destroy_workqueue(hdev->cq_wq);
+ for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++)
+ if (hdev->cq_wq[i])
+ destroy_workqueue(hdev->cq_wq[i]);
+ kfree(hdev->cq_wq);
asid_fini:
hl_asid_fini(hdev);
early_fini:
@@ -339,6 +356,8 @@ early_fini:
*/
static void device_early_fini(struct hl_device *hdev)
{
+ int i;
+
mutex_destroy(&hdev->mmu_cache_lock);
mutex_destroy(&hdev->debug_lock);
mutex_destroy(&hdev->send_cpu_message_lock);
@@ -351,7 +370,10 @@ static void device_early_fini(struct hl_device *hdev)
kfree(hdev->hl_chip_info);
destroy_workqueue(hdev->eq_wq);
- destroy_workqueue(hdev->cq_wq);
+
+ for (i = 0 ; i < hdev->asic_prop.completion_queues_count ; i++)
+ destroy_workqueue(hdev->cq_wq[i]);
+ kfree(hdev->cq_wq);
hl_asid_fini(hdev);
@@ -838,6 +860,22 @@ int hl_device_reset(struct hl_device *hdev, bool hard_reset,
if (rc)
return 0;
+ if (hard_reset) {
+ /* Disable PCI access from device F/W so he won't send
+ * us additional interrupts. We disable MSI/MSI-X at
+ * the halt_engines function and we can't have the F/W
+ * sending us interrupts after that. We need to disable
+ * the access here because if the device is marked
+ * disable, the message won't be send. Also, in case
+ * of heartbeat, the device CPU is marked as disable
+ * so this message won't be sent
+ */
+ if (hl_fw_send_pci_access_msg(hdev,
+ ARMCP_PACKET_DISABLE_PCI_ACCESS))
+ dev_warn(hdev->dev,
+ "Failed to disable PCI access by F/W\n");
+ }
+
/* This also blocks future CS/VM/JOB completion operations */
hdev->disabled = true;
@@ -995,6 +1033,12 @@ again:
}
}
+ /* Device is now enabled as part of the initialization requires
+ * communication with the device firmware to get information that
+ * is required for the initialization itself
+ */
+ hdev->disabled = false;
+
rc = hdev->asic_funcs->hw_init(hdev);
if (rc) {
dev_err(hdev->dev,
@@ -1002,8 +1046,6 @@ again:
goto out_err;
}
- hdev->disabled = false;
-
/* Check that the communication with the device is working */
rc = hdev->asic_funcs->test_queues(hdev);
if (rc) {
@@ -1144,14 +1186,17 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
* because there the addresses of the completion queues are being
* passed as arguments to request_irq
*/
- hdev->completion_queue = kcalloc(cq_cnt,
- sizeof(*hdev->completion_queue),
- GFP_KERNEL);
+ if (cq_cnt) {
+ hdev->completion_queue = kcalloc(cq_cnt,
+ sizeof(*hdev->completion_queue),
+ GFP_KERNEL);
- if (!hdev->completion_queue) {
- dev_err(hdev->dev, "failed to allocate completion queues\n");
- rc = -ENOMEM;
- goto hw_queues_destroy;
+ if (!hdev->completion_queue) {
+ dev_err(hdev->dev,
+ "failed to allocate completion queues\n");
+ rc = -ENOMEM;
+ goto hw_queues_destroy;
+ }
}
for (i = 0, cq_ready_cnt = 0 ; i < cq_cnt ; i++, cq_ready_cnt++) {
@@ -1162,6 +1207,7 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
"failed to initialize completion queue\n");
goto cq_fini;
}
+ hdev->completion_queue[i].cq_idx = i;
}
/*
@@ -1219,6 +1265,12 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
*/
add_cdev_sysfs_on_err = true;
+ /* Device is now enabled as part of the initialization requires
+ * communication with the device firmware to get information that
+ * is required for the initialization itself
+ */
+ hdev->disabled = false;
+
rc = hdev->asic_funcs->hw_init(hdev);
if (rc) {
dev_err(hdev->dev, "failed to initialize the H/W\n");
@@ -1226,8 +1278,6 @@ int hl_device_init(struct hl_device *hdev, struct class *hclass)
goto out_disabled;
}
- hdev->disabled = false;
-
/* Check that the communication with the device is working */
rc = hdev->asic_funcs->test_queues(hdev);
if (rc) {
diff --git a/drivers/misc/habanalabs/firmware_if.c b/drivers/misc/habanalabs/common/firmware_if.c
index d27841cb5bcb..f70302cdab1b 100644
--- a/drivers/misc/habanalabs/firmware_if.c
+++ b/drivers/misc/habanalabs/common/firmware_if.c
@@ -6,7 +6,7 @@
*/
#include "habanalabs.h"
-#include "include/hl_boot_if.h"
+#include "../include/common/hl_boot_if.h"
#include <linux/firmware.h>
#include <linux/genalloc.h>
@@ -15,7 +15,10 @@
/**
* hl_fw_load_fw_to_device() - Load F/W code to device's memory.
+ *
* @hdev: pointer to hl_device structure.
+ * @fw_name: the firmware image name
+ * @dst: IO memory mapped address space to copy firmware to
*
* Copy fw code from firmware file to device memory.
*
@@ -286,7 +289,7 @@ int hl_fw_armcp_info_get(struct hl_device *hdev)
HL_ARMCP_INFO_TIMEOUT_USEC, &result);
if (rc) {
dev_err(hdev->dev,
- "Failed to send ArmCP info pkt, error %d\n", rc);
+ "Failed to handle ArmCP info pkt, error %d\n", rc);
goto out;
}
@@ -337,7 +340,7 @@ int hl_fw_get_eeprom_data(struct hl_device *hdev, void *data, size_t max_size)
if (rc) {
dev_err(hdev->dev,
- "Failed to send ArmCP EEPROM packet, error %d\n", rc);
+ "Failed to handle ArmCP EEPROM packet, error %d\n", rc);
goto out;
}
@@ -390,6 +393,53 @@ static void fw_read_errors(struct hl_device *hdev, u32 boot_err0_reg)
"Device boot error - NIC F/W initialization failed\n");
}
+static void hl_detect_cpu_boot_status(struct hl_device *hdev, u32 status)
+{
+ switch (status) {
+ case CPU_BOOT_STATUS_NA:
+ dev_err(hdev->dev,
+ "Device boot error - BTL did NOT run\n");
+ break;
+ case CPU_BOOT_STATUS_IN_WFE:
+ dev_err(hdev->dev,
+ "Device boot error - Stuck inside WFE loop\n");
+ break;
+ case CPU_BOOT_STATUS_IN_BTL:
+ dev_err(hdev->dev,
+ "Device boot error - Stuck in BTL\n");
+ break;
+ case CPU_BOOT_STATUS_IN_PREBOOT:
+ dev_err(hdev->dev,
+ "Device boot error - Stuck in Preboot\n");
+ break;
+ case CPU_BOOT_STATUS_IN_SPL:
+ dev_err(hdev->dev,
+ "Device boot error - Stuck in SPL\n");
+ break;
+ case CPU_BOOT_STATUS_IN_UBOOT:
+ dev_err(hdev->dev,
+ "Device boot error - Stuck in u-boot\n");
+ break;
+ case CPU_BOOT_STATUS_DRAM_INIT_FAIL:
+ dev_err(hdev->dev,
+ "Device boot error - DRAM initialization failed\n");
+ break;
+ case CPU_BOOT_STATUS_UBOOT_NOT_READY:
+ dev_err(hdev->dev,
+ "Device boot error - u-boot stopped by user\n");
+ break;
+ case CPU_BOOT_STATUS_TS_INIT_FAIL:
+ dev_err(hdev->dev,
+ "Device boot error - Thermal Sensor initialization failed\n");
+ break;
+ default:
+ dev_err(hdev->dev,
+ "Device boot error - Invalid status code %d\n",
+ status);
+ break;
+ }
+}
+
int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
u32 msg_to_cpu_reg, u32 cpu_msg_status_reg,
u32 boot_err0_reg, bool skip_bmc,
@@ -463,50 +513,7 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
* versions but we keep them here for backward compatibility
*/
if (rc) {
- switch (status) {
- case CPU_BOOT_STATUS_NA:
- dev_err(hdev->dev,
- "Device boot error - BTL did NOT run\n");
- break;
- case CPU_BOOT_STATUS_IN_WFE:
- dev_err(hdev->dev,
- "Device boot error - Stuck inside WFE loop\n");
- break;
- case CPU_BOOT_STATUS_IN_BTL:
- dev_err(hdev->dev,
- "Device boot error - Stuck in BTL\n");
- break;
- case CPU_BOOT_STATUS_IN_PREBOOT:
- dev_err(hdev->dev,
- "Device boot error - Stuck in Preboot\n");
- break;
- case CPU_BOOT_STATUS_IN_SPL:
- dev_err(hdev->dev,
- "Device boot error - Stuck in SPL\n");
- break;
- case CPU_BOOT_STATUS_IN_UBOOT:
- dev_err(hdev->dev,
- "Device boot error - Stuck in u-boot\n");
- break;
- case CPU_BOOT_STATUS_DRAM_INIT_FAIL:
- dev_err(hdev->dev,
- "Device boot error - DRAM initialization failed\n");
- break;
- case CPU_BOOT_STATUS_UBOOT_NOT_READY:
- dev_err(hdev->dev,
- "Device boot error - u-boot stopped by user\n");
- break;
- case CPU_BOOT_STATUS_TS_INIT_FAIL:
- dev_err(hdev->dev,
- "Device boot error - Thermal Sensor initialization failed\n");
- break;
- default:
- dev_err(hdev->dev,
- "Device boot error - Invalid status code %d\n",
- status);
- break;
- }
-
+ hl_detect_cpu_boot_status(hdev, status);
rc = -EIO;
goto out;
}
@@ -566,7 +573,8 @@ int hl_fw_init_cpu(struct hl_device *hdev, u32 cpu_boot_status_reg,
"Device reports FIT image is corrupted\n");
else
dev_err(hdev->dev,
- "Device failed to load, %d\n", status);
+ "Failed to load firmware to device, %d\n",
+ status);
rc = -EIO;
goto out;
diff --git a/drivers/misc/habanalabs/habanalabs.h b/drivers/misc/habanalabs/common/habanalabs.h
index 194d83352696..018d9d67e8e6 100644
--- a/drivers/misc/habanalabs/habanalabs.h
+++ b/drivers/misc/habanalabs/common/habanalabs.h
@@ -8,8 +8,9 @@
#ifndef HABANALABSP_H_
#define HABANALABSP_H_
-#include "include/armcp_if.h"
-#include "include/qman_if.h"
+#include "../include/common/armcp_if.h"
+#include "../include/common/qman_if.h"
+#include <uapi/misc/habanalabs.h>
#include <linux/cdev.h>
#include <linux/iopoll.h>
@@ -40,11 +41,6 @@
#define HL_SIM_MAX_TIMEOUT_US 10000000 /* 10s */
-#define HL_MAX_QUEUES 128
-
-/* MUST BE POWER OF 2 and larger than 1 */
-#define HL_MAX_PENDING_CS 64
-
#define HL_IDLE_BUSY_TS_ARR_SIZE 4096
/* Memory */
@@ -53,6 +49,10 @@
/* MMU */
#define MMU_HASH_TABLE_BITS 7 /* 1 << 7 buckets */
+/*
+ * HL_RSVD_SOBS 'sync stream' reserved sync objects per QMAN stream
+ * HL_RSVD_MONS 'sync stream' reserved monitors per QMAN stream
+ */
#define HL_RSVD_SOBS 4
#define HL_RSVD_MONS 2
@@ -61,6 +61,11 @@
#define HL_MAX_SOB_VAL (1 << 15)
+#define IS_POWER_OF_2(n) (n != 0 && ((n & (n - 1)) == 0))
+#define IS_MAX_PENDING_CS_VALID(n) (IS_POWER_OF_2(n) && (n > 1))
+
+#define HL_PCI_NUM_BARS 6
+
/**
* struct pgt_info - MMU hop page info.
* @node: hash linked-list node for the pgts shadow hash of pgts.
@@ -86,6 +91,16 @@ struct hl_device;
struct hl_fpriv;
/**
+ * enum hl_pci_match_mode - pci match mode per region
+ * @PCI_ADDRESS_MATCH_MODE: address match mode
+ * @PCI_BAR_MATCH_MODE: bar match mode
+ */
+enum hl_pci_match_mode {
+ PCI_ADDRESS_MATCH_MODE,
+ PCI_BAR_MATCH_MODE
+};
+
+/**
* enum hl_fw_component - F/W components to read version through registers.
* @FW_COMP_UBOOT: u-boot.
* @FW_COMP_PREBOOT: preboot.
@@ -121,6 +136,32 @@ enum hl_cs_type {
};
/*
+ * struct hl_inbound_pci_region - inbound region descriptor
+ * @mode: pci match mode for this region
+ * @addr: region target address
+ * @size: region size in bytes
+ * @offset_in_bar: offset within bar (address match mode)
+ * @bar: bar id
+ */
+struct hl_inbound_pci_region {
+ enum hl_pci_match_mode mode;
+ u64 addr;
+ u64 size;
+ u64 offset_in_bar;
+ u8 bar;
+};
+
+/*
+ * struct hl_outbound_pci_region - outbound region descriptor
+ * @addr: region target address
+ * @size: region size in bytes
+ */
+struct hl_outbound_pci_region {
+ u64 addr;
+ u64 size;
+};
+
+/*
* struct hl_hw_sob - H/W SOB info.
* @hdev: habanalabs device structure.
* @kref: refcount of this SOB. The SOB will reset once the refcount is zero.
@@ -141,11 +182,13 @@ struct hl_hw_sob {
* false otherwise.
* @requires_kernel_cb: true if a CB handle must be provided for jobs on this
* queue, false otherwise (a CB address must be provided).
+ * @supports_sync_stream: True if queue supports sync stream
*/
struct hw_queue_properties {
enum hl_queue_type type;
u8 driver_only;
u8 requires_kernel_cb;
+ u8 supports_sync_stream;
};
/**
@@ -241,14 +284,19 @@ struct hl_mmu_properties {
* @psoc_pci_pll_nf: PCI PLL NF value.
* @psoc_pci_pll_od: PCI PLL OD value.
* @psoc_pci_pll_div_factor: PCI PLL DIV FACTOR 1 value.
+ * @psoc_timestamp_frequency: frequency of the psoc timestamp clock.
* @high_pll: high PLL frequency used by the device.
* @cb_pool_cb_cnt: number of CBs in the CB pool.
* @cb_pool_cb_size: size of each CB in the CB pool.
+ * @max_pending_cs: maximum of concurrent pending command submissions
+ * @max_queues: maximum amount of queues in the system
+ * @sync_stream_first_sob: first sync object available for sync stream use
+ * @sync_stream_first_mon: first monitor available for sync stream use
* @tpc_enabled_mask: which TPCs are enabled.
* @completion_queues_count: number of completion queues.
*/
struct asic_fixed_properties {
- struct hw_queue_properties hw_queues_props[HL_MAX_QUEUES];
+ struct hw_queue_properties *hw_queues_props;
struct armcp_info armcp_info;
char uboot_ver[VERSION_MAX_LEN];
char preboot_ver[VERSION_MAX_LEN];
@@ -282,9 +330,14 @@ struct asic_fixed_properties {
u32 psoc_pci_pll_nf;
u32 psoc_pci_pll_od;
u32 psoc_pci_pll_div_factor;
+ u32 psoc_timestamp_frequency;
u32 high_pll;
u32 cb_pool_cb_cnt;
u32 cb_pool_cb_size;
+ u32 max_pending_cs;
+ u32 max_queues;
+ u16 sync_stream_first_sob;
+ u16 sync_stream_first_mon;
u8 tpc_enabled_mask;
u8 completion_queues_count;
};
@@ -339,6 +392,7 @@ struct hl_cb_mgr {
* @ctx_id: holds the ID of the owner's context.
* @mmap: true if the CB is currently mmaped to user.
* @is_pool: true if CB was acquired from the pool, false otherwise.
+ * @is_internal: internaly allocated
*/
struct hl_cb {
struct kref refcount;
@@ -355,6 +409,7 @@ struct hl_cb {
u32 ctx_id;
u8 mmap;
u8 is_pool;
+ u8 is_internal;
};
@@ -364,38 +419,19 @@ struct hl_cb {
struct hl_cs_job;
-/*
- * Currently, there are two limitations on the maximum length of a queue:
- *
- * 1. The memory footprint of the queue. The current allocated space for the
- * queue is PAGE_SIZE. Because each entry in the queue is HL_BD_SIZE,
- * the maximum length of the queue can be PAGE_SIZE / HL_BD_SIZE,
- * which currently is 4096/16 = 256 entries.
- *
- * To increase that, we need either to decrease the size of the
- * BD (difficult), or allocate more than a single page (easier).
- *
- * 2. Because the size of the JOB handle field in the BD CTL / completion queue
- * is 10-bit, we can have up to 1024 open jobs per hardware queue.
- * Therefore, each queue can hold up to 1024 entries.
- *
- * HL_QUEUE_LENGTH is in units of struct hl_bd.
- * HL_QUEUE_LENGTH * sizeof(struct hl_bd) should be <= HL_PAGE_SIZE
- */
-
-#define HL_PAGE_SIZE 4096 /* minimum page size */
-/* Must be power of 2 (HL_PAGE_SIZE / HL_BD_SIZE) */
-#define HL_QUEUE_LENGTH 256
+/* Queue length of external and HW queues */
+#define HL_QUEUE_LENGTH 4096
#define HL_QUEUE_SIZE_IN_BYTES (HL_QUEUE_LENGTH * HL_BD_SIZE)
-/*
- * HL_CQ_LENGTH is in units of struct hl_cq_entry.
- * HL_CQ_LENGTH should be <= HL_PAGE_SIZE
- */
+#if (HL_MAX_JOBS_PER_CS > HL_QUEUE_LENGTH)
+#error "HL_QUEUE_LENGTH must be greater than HL_MAX_JOBS_PER_CS"
+#endif
+
+/* HL_CQ_LENGTH is in units of struct hl_cq_entry */
#define HL_CQ_LENGTH HL_QUEUE_LENGTH
#define HL_CQ_SIZE_IN_BYTES (HL_CQ_LENGTH * HL_CQ_ENTRY_SIZE)
-/* Must be power of 2 (HL_PAGE_SIZE / HL_EQ_ENTRY_SIZE) */
+/* Must be power of 2 */
#define HL_EQ_LENGTH 64
#define HL_EQ_SIZE_IN_BYTES (HL_EQ_LENGTH * HL_EQ_ENTRY_SIZE)
@@ -422,6 +458,7 @@ struct hl_cs_job;
* exist).
* @curr_sob_offset: the id offset to the currently used SOB from the
* HL_RSVD_SOBS that are being used by this queue.
+ * @supports_sync_stream: True if queue supports sync stream
*/
struct hl_hw_queue {
struct hl_hw_sob hw_sob[HL_RSVD_SOBS];
@@ -430,7 +467,7 @@ struct hl_hw_queue {
u64 kernel_address;
dma_addr_t bus_address;
u32 pi;
- u32 ci;
+ atomic_t ci;
u32 hw_queue_id;
u32 cq_id;
u32 msi_vec;
@@ -440,6 +477,7 @@ struct hl_hw_queue {
u16 base_mon_id;
u8 valid;
u8 curr_sob_offset;
+ u8 supports_sync_stream;
};
/**
@@ -447,6 +485,7 @@ struct hl_hw_queue {
* @hdev: pointer to the device structure
* @kernel_address: holds the queue's kernel virtual address
* @bus_address: holds the queue's DMA address
+ * @cq_idx: completion queue index in array
* @hw_queue_id: the id of the matching H/W queue
* @ci: ci inside the queue
* @pi: pi inside the queue
@@ -456,6 +495,7 @@ struct hl_cq {
struct hl_device *hdev;
u64 kernel_address;
dma_addr_t bus_address;
+ u32 cq_idx;
u32 hw_queue_id;
u32 ci;
u32 pi;
@@ -519,6 +559,15 @@ enum hl_pll_frequency {
PLL_LAST
};
+#define PLL_REF_CLK 50
+
+enum div_select_defs {
+ DIV_SEL_REF_CLK = 0,
+ DIV_SEL_PLL_CLK = 1,
+ DIV_SEL_DIVIDED_REF = 2,
+ DIV_SEL_DIVIDED_PLL = 3,
+};
+
/**
* struct hl_asic_funcs - ASIC specific functions that are can be called from
* common code.
@@ -601,14 +650,13 @@ enum hl_pll_frequency {
* @rreg: Read a register. Needed for simulator support.
* @wreg: Write a register. Needed for simulator support.
* @halt_coresight: stop the ETF and ETR traces.
+ * @ctx_init: context dependent initialization.
* @get_clk_rate: Retrieve the ASIC current and maximum clock rate in MHz
* @get_queue_id_for_cq: Get the H/W queue id related to the given CQ index.
* @read_device_fw_version: read the device's firmware versions that are
* contained in registers
* @load_firmware_to_device: load the firmware to the device's memory
* @load_boot_fit_to_device: load boot fit to device's memory
- * @ext_queue_init: Initialize the given external queue.
- * @ext_queue_reset: Reset the given external queue.
* @get_signal_cb_size: Get signal CB size.
* @get_wait_cb_size: Get wait CB size.
* @gen_signal_cb: Generate a signal CB.
@@ -705,14 +753,13 @@ struct hl_asic_funcs {
u32 (*rreg)(struct hl_device *hdev, u32 reg);
void (*wreg)(struct hl_device *hdev, u32 reg, u32 val);
void (*halt_coresight)(struct hl_device *hdev);
+ int (*ctx_init)(struct hl_ctx *ctx);
int (*get_clk_rate)(struct hl_device *hdev, u32 *cur_clk, u32 *max_clk);
u32 (*get_queue_id_for_cq)(struct hl_device *hdev, u32 cq_idx);
void (*read_device_fw_version)(struct hl_device *hdev,
enum hl_fw_component fwc);
int (*load_firmware_to_device)(struct hl_device *hdev);
int (*load_boot_fit_to_device)(struct hl_device *hdev);
- void (*ext_queue_init)(struct hl_device *hdev, u32 hw_queue_id);
- void (*ext_queue_reset)(struct hl_device *hdev, u32 hw_queue_id);
u32 (*get_signal_cb_size)(struct hl_device *hdev);
u32 (*get_wait_cb_size)(struct hl_device *hdev);
void (*gen_signal_cb)(struct hl_device *hdev, void *data, u16 sob_id);
@@ -748,7 +795,6 @@ struct hl_va_range {
* struct hl_ctx - user/kernel context.
* @mem_hash: holds mapping from virtual address to virtual memory area
* descriptor (hl_vm_phys_pg_list or hl_userptr).
- * @mmu_phys_hash: holds a mapping from physical address to pgt_info structure.
* @mmu_shadow_hash: holds a mapping from shadow address to pgt_info structure.
* @hpriv: pointer to the private (Kernel Driver) data of the process (fd).
* @hdev: pointer to the device structure.
@@ -782,18 +828,18 @@ struct hl_va_range {
*/
struct hl_ctx {
DECLARE_HASHTABLE(mem_hash, MEM_HASH_TABLE_BITS);
- DECLARE_HASHTABLE(mmu_phys_hash, MMU_HASH_TABLE_BITS);
DECLARE_HASHTABLE(mmu_shadow_hash, MMU_HASH_TABLE_BITS);
struct hl_fpriv *hpriv;
struct hl_device *hdev;
struct kref refcount;
- struct dma_fence *cs_pending[HL_MAX_PENDING_CS];
+ struct dma_fence **cs_pending;
struct hl_va_range *host_va_range;
struct hl_va_range *host_huge_va_range;
struct hl_va_range *dram_va_range;
struct mutex mem_hash_lock;
struct mutex mmu_lock;
struct list_head debugfs_list;
+ struct hl_cs_counters cs_counters;
u64 cs_sequence;
u64 *dram_default_hops;
spinlock_t cs_lock;
@@ -868,7 +914,7 @@ struct hl_userptr {
* @aborted: true if CS was aborted due to some device error.
*/
struct hl_cs {
- u16 jobs_in_queue_cnt[HL_MAX_QUEUES];
+ u16 *jobs_in_queue_cnt;
struct hl_ctx *ctx;
struct list_head job_list;
spinlock_t job_lock;
@@ -1352,7 +1398,9 @@ struct hl_device_idle_busy_ts {
/**
* struct hl_device - habanalabs device structure.
* @pdev: pointer to PCI device, can be NULL in case of simulator device.
- * @pcie_bar: array of available PCIe bars.
+ * @pcie_bar_phys: array of available PCIe bars physical addresses.
+ * (required only for PCI address match mode)
+ * @pcie_bar: array of available PCIe bars virtual addresses.
* @rmmio: configuration area address on SRAM.
* @cdev: related char device.
* @cdev_ctrl: char device for control operations only (INFO IOCTL)
@@ -1363,7 +1411,8 @@ struct hl_device_idle_busy_ts {
* @asic_name: ASIC specific nmae.
* @asic_type: ASIC specific type.
* @completion_queue: array of hl_cq.
- * @cq_wq: work queue of completion queues for executing work in process context
+ * @cq_wq: work queues of completion queues for executing work in process
+ * context.
* @eq_wq: work queue of event queue for executing work in process context.
* @kernel_ctx: Kernel driver context structure.
* @kernel_queues: array of hl_hw_queue.
@@ -1392,12 +1441,17 @@ struct hl_device_idle_busy_ts {
* @hl_debugfs: device's debugfs manager.
* @cb_pool: list of preallocated CBs.
* @cb_pool_lock: protects the CB pool.
+ * @internal_cb_pool_virt_addr: internal command buffer pool virtual address.
+ * @internal_cb_pool_dma_addr: internal command buffer pool dma address.
+ * @internal_cb_pool: internal command buffer memory pool.
+ * @internal_cb_va_base: internal cb pool mmu virtual address base
* @fpriv_list: list of file private data structures. Each structure is created
* when a user opens the device
* @fpriv_list_lock: protects the fpriv_list
* @compute_ctx: current compute context executing.
* @idle_busy_ts_arr: array to hold time stamps of transitions from idle to busy
* and vice-versa
+ * @aggregated_cs_counters: aggregated cs counters among all contexts
* @dram_used_mem: current DRAM memory consumption.
* @timeout_jiffies: device CS timeout value.
* @max_power: the max power of the device, as configured by the sysadmin. This
@@ -1442,12 +1496,14 @@ struct hl_device_idle_busy_ts {
* @cdev_sysfs_created: were char devices and sysfs nodes created.
* @stop_on_err: true if engines should stop on error.
* @supports_sync_stream: is sync stream supported.
+ * @sync_stream_queue_idx: helper index for sync stream queues initialization.
* @supports_coresight: is CoreSight supported.
* @supports_soft_reset: is soft reset supported.
*/
struct hl_device {
struct pci_dev *pdev;
- void __iomem *pcie_bar[6];
+ u64 pcie_bar_phys[HL_PCI_NUM_BARS];
+ void __iomem *pcie_bar[HL_PCI_NUM_BARS];
void __iomem *rmmio;
struct cdev cdev;
struct cdev cdev_ctrl;
@@ -1458,7 +1514,7 @@ struct hl_device {
char asic_name[16];
enum hl_asic_type asic_type;
struct hl_cq *completion_queue;
- struct workqueue_struct *cq_wq;
+ struct workqueue_struct **cq_wq;
struct workqueue_struct *eq_wq;
struct hl_ctx *kernel_ctx;
struct hl_hw_queue *kernel_queues;
@@ -1490,6 +1546,11 @@ struct hl_device {
struct list_head cb_pool;
spinlock_t cb_pool_lock;
+ void *internal_cb_pool_virt_addr;
+ dma_addr_t internal_cb_pool_dma_addr;
+ struct gen_pool *internal_cb_pool;
+ u64 internal_cb_va_base;
+
struct list_head fpriv_list;
struct mutex fpriv_list_lock;
@@ -1497,6 +1558,8 @@ struct hl_device {
struct hl_device_idle_busy_ts *idle_busy_ts_arr;
+ struct hl_cs_counters aggregated_cs_counters;
+
atomic64_t dram_used_mem;
u64 timeout_jiffies;
u64 max_power;
@@ -1529,6 +1592,7 @@ struct hl_device {
u8 cdev_sysfs_created;
u8 stop_on_err;
u8 supports_sync_stream;
+ u8 sync_stream_queue_idx;
u8 supports_coresight;
u8 supports_soft_reset;
@@ -1697,7 +1761,7 @@ int hl_hwmon_init(struct hl_device *hdev);
void hl_hwmon_fini(struct hl_device *hdev);
int hl_cb_create(struct hl_device *hdev, struct hl_cb_mgr *mgr, u32 cb_size,
- u64 *handle, int ctx_id);
+ u64 *handle, int ctx_id, bool internal_cb);
int hl_cb_destroy(struct hl_device *hdev, struct hl_cb_mgr *mgr, u64 cb_handle);
int hl_cb_mmap(struct hl_fpriv *hpriv, struct vm_area_struct *vma);
struct hl_cb *hl_cb_get(struct hl_device *hdev, struct hl_cb_mgr *mgr,
@@ -1705,7 +1769,8 @@ struct hl_cb *hl_cb_get(struct hl_device *hdev, struct hl_cb_mgr *mgr,
void hl_cb_put(struct hl_cb *cb);
void hl_cb_mgr_init(struct hl_cb_mgr *mgr);
void hl_cb_mgr_fini(struct hl_device *hdev, struct hl_cb_mgr *mgr);
-struct hl_cb *hl_cb_kernel_create(struct hl_device *hdev, u32 cb_size);
+struct hl_cb *hl_cb_kernel_create(struct hl_device *hdev, u32 cb_size,
+ bool internal_cb);
int hl_cb_pool_init(struct hl_device *hdev);
int hl_cb_pool_fini(struct hl_device *hdev);
@@ -1769,9 +1834,10 @@ int hl_pci_bars_map(struct hl_device *hdev, const char * const name[3],
int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data);
int hl_pci_set_dram_bar_base(struct hl_device *hdev, u8 inbound_region, u8 bar,
u64 addr);
-int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address,
- u64 dram_base_address, u64 host_phys_base_address,
- u64 host_phys_size);
+int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
+ struct hl_inbound_pci_region *pci_region);
+int hl_pci_set_outbound_region(struct hl_device *hdev,
+ struct hl_outbound_pci_region *pci_region);
int hl_pci_init(struct hl_device *hdev);
void hl_pci_fini(struct hl_device *hdev);
diff --git a/drivers/misc/habanalabs/habanalabs_drv.c b/drivers/misc/habanalabs/common/habanalabs_drv.c
index 22716da9f85f..c6b31e93fb5e 100644
--- a/drivers/misc/habanalabs/habanalabs_drv.c
+++ b/drivers/misc/habanalabs/common/habanalabs_drv.c
@@ -238,7 +238,6 @@ static void set_driver_behavior_per_device(struct hl_device *hdev)
hdev->axi_drain = 0;
hdev->sram_scrambler_enable = 1;
hdev->dram_scrambler_enable = 1;
- hdev->rl_enable = 1;
hdev->bmc_enable = 1;
hdev->hard_reset_on_fw_events = 1;
}
diff --git a/drivers/misc/habanalabs/habanalabs_ioctl.c b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
index 52eedd3a6c3a..5af1c03da473 100644
--- a/drivers/misc/habanalabs/habanalabs_ioctl.c
+++ b/drivers/misc/habanalabs/common/habanalabs_ioctl.c
@@ -276,6 +276,27 @@ static int time_sync_info(struct hl_device *hdev, struct hl_info_args *args)
min((size_t) max_size, sizeof(time_sync))) ? -EFAULT : 0;
}
+static int cs_counters_info(struct hl_fpriv *hpriv, struct hl_info_args *args)
+{
+ struct hl_device *hdev = hpriv->hdev;
+ struct hl_info_cs_counters cs_counters = {0};
+ u32 max_size = args->return_size;
+ void __user *out = (void __user *) (uintptr_t) args->return_pointer;
+
+ if ((!max_size) || (!out))
+ return -EINVAL;
+
+ memcpy(&cs_counters.cs_counters, &hdev->aggregated_cs_counters,
+ sizeof(struct hl_cs_counters));
+
+ if (hpriv->ctx)
+ memcpy(&cs_counters.ctx_cs_counters, &hpriv->ctx->cs_counters,
+ sizeof(struct hl_cs_counters));
+
+ return copy_to_user(out, &cs_counters,
+ min((size_t) max_size, sizeof(cs_counters))) ? -EFAULT : 0;
+}
+
static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
struct device *dev)
{
@@ -336,6 +357,9 @@ static int _hl_info_ioctl(struct hl_fpriv *hpriv, void *data,
case HL_INFO_TIME_SYNC:
return time_sync_info(hdev, args);
+ case HL_INFO_CS_COUNTERS:
+ return cs_counters_info(hpriv, args);
+
default:
dev_err(dev, "Invalid request %d\n", args->op);
rc = -ENOTTY;
diff --git a/drivers/misc/habanalabs/hw_queue.c b/drivers/misc/habanalabs/common/hw_queue.c
index f4434b39ef1b..287681646071 100644
--- a/drivers/misc/habanalabs/hw_queue.c
+++ b/drivers/misc/habanalabs/common/hw_queue.c
@@ -23,10 +23,14 @@ inline u32 hl_hw_queue_add_ptr(u32 ptr, u16 val)
ptr &= ((HL_QUEUE_LENGTH << 1) - 1);
return ptr;
}
+static inline int queue_ci_get(atomic_t *ci, u32 queue_len)
+{
+ return atomic_read(ci) & ((queue_len << 1) - 1);
+}
static inline int queue_free_slots(struct hl_hw_queue *q, u32 queue_len)
{
- int delta = (q->pi - q->ci);
+ int delta = (q->pi - queue_ci_get(&q->ci, queue_len));
if (delta >= 0)
return (queue_len - delta);
@@ -40,21 +44,14 @@ void hl_int_hw_queue_update_ci(struct hl_cs *cs)
struct hl_hw_queue *q;
int i;
- hdev->asic_funcs->hw_queues_lock(hdev);
-
if (hdev->disabled)
- goto out;
+ return;
q = &hdev->kernel_queues[0];
- for (i = 0 ; i < HL_MAX_QUEUES ; i++, q++) {
- if (q->queue_type == QUEUE_TYPE_INT) {
- q->ci += cs->jobs_in_queue_cnt[i];
- q->ci &= ((q->int_queue_len << 1) - 1);
- }
+ for (i = 0 ; i < hdev->asic_prop.max_queues ; i++, q++) {
+ if (q->queue_type == QUEUE_TYPE_INT)
+ atomic_add(cs->jobs_in_queue_cnt[i], &q->ci);
}
-
-out:
- hdev->asic_funcs->hw_queues_unlock(hdev);
}
/*
@@ -161,6 +158,13 @@ static int int_queue_sanity_checks(struct hl_device *hdev,
{
int free_slots_cnt;
+ if (num_of_entries > q->int_queue_len) {
+ dev_err(hdev->dev,
+ "Cannot populate queue %u with %u jobs\n",
+ q->hw_queue_id, num_of_entries);
+ return -ENOMEM;
+ }
+
/* Check we have enough space in the queue */
free_slots_cnt = queue_free_slots(q, q->int_queue_len);
@@ -174,38 +178,26 @@ static int int_queue_sanity_checks(struct hl_device *hdev,
}
/*
- * hw_queue_sanity_checks() - Perform some sanity checks on a H/W queue.
+ * hw_queue_sanity_checks() - Make sure we have enough space in the h/w queue
* @hdev: Pointer to hl_device structure.
* @q: Pointer to hl_hw_queue structure.
* @num_of_entries: How many entries to check for space.
*
- * Perform the following:
- * - Make sure we have enough space in the completion queue.
- * This check also ensures that there is enough space in the h/w queue, as
- * both queues are of the same size.
- * - Reserve space in the completion queue (needs to be reversed if there
- * is a failure down the road before the actual submission of work).
+ * Notice: We do not reserve queue entries so this function mustn't be called
+ * more than once per CS for the same queue
*
- * Both operations are done using the "free_slots_cnt" field of the completion
- * queue. The CI counters of the queue and the completion queue are not
- * needed/used for the H/W queue type.
*/
static int hw_queue_sanity_checks(struct hl_device *hdev, struct hl_hw_queue *q,
int num_of_entries)
{
- atomic_t *free_slots =
- &hdev->completion_queue[q->cq_id].free_slots_cnt;
+ int free_slots_cnt;
- /*
- * Check we have enough space in the completion queue.
- * Add -1 to counter (decrement) unless counter was already 0.
- * In that case, CQ is full so we can't submit a new CB.
- * atomic_add_unless will return 0 if counter was already 0.
- */
- if (atomic_add_negative(num_of_entries * -1, free_slots)) {
- dev_dbg(hdev->dev, "No space for %d entries on CQ %d\n",
- num_of_entries, q->hw_queue_id);
- atomic_add(num_of_entries, free_slots);
+ /* Check we have enough space in the queue */
+ free_slots_cnt = queue_free_slots(q, HL_QUEUE_LENGTH);
+
+ if (free_slots_cnt < num_of_entries) {
+ dev_dbg(hdev->dev, "Queue %d doesn't have room for %d CBs\n",
+ q->hw_queue_id, num_of_entries);
return -EAGAIN;
}
@@ -366,7 +358,6 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
{
struct hl_device *hdev = job->cs->ctx->hdev;
struct hl_hw_queue *q = &hdev->kernel_queues[job->hw_queue_id];
- struct hl_cq *cq;
u64 ptr;
u32 offset, ctl, len;
@@ -376,7 +367,7 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
* write address offset in the SM block (QMAN LBW message).
* The write address offset is calculated as "COMP_OFFSET << 2".
*/
- offset = job->cs->sequence & (HL_MAX_PENDING_CS - 1);
+ offset = job->cs->sequence & (hdev->asic_prop.max_pending_cs - 1);
ctl = ((offset << BD_CTL_COMP_OFFSET_SHIFT) & BD_CTL_COMP_OFFSET_MASK) |
((q->pi << BD_CTL_COMP_DATA_SHIFT) & BD_CTL_COMP_DATA_MASK);
@@ -395,17 +386,6 @@ static void hw_queue_schedule_job(struct hl_cs_job *job)
else
ptr = (u64) (uintptr_t) job->user_cb;
- /*
- * No need to protect pi_offset because scheduling to the
- * H/W queues is done under the scheduler mutex
- *
- * No need to check if CQ is full because it was already
- * checked in hw_queue_sanity_checks
- */
- cq = &hdev->completion_queue[q->cq_id];
-
- cq->pi = hl_cq_inc_ptr(cq->pi);
-
ext_and_hw_queue_submit_bd(hdev, q, ctl, len, ptr);
}
@@ -509,19 +489,23 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
struct hl_device *hdev = ctx->hdev;
struct hl_cs_job *job, *tmp;
struct hl_hw_queue *q;
+ u32 max_queues;
int rc = 0, i, cq_cnt;
hdev->asic_funcs->hw_queues_lock(hdev);
if (hl_device_disabled_or_in_reset(hdev)) {
+ ctx->cs_counters.device_in_reset_drop_cnt++;
dev_err(hdev->dev,
"device is disabled or in reset, CS rejected!\n");
rc = -EPERM;
goto out;
}
+ max_queues = hdev->asic_prop.max_queues;
+
q = &hdev->kernel_queues[0];
- for (i = 0, cq_cnt = 0 ; i < HL_MAX_QUEUES ; i++, q++) {
+ for (i = 0, cq_cnt = 0 ; i < max_queues ; i++, q++) {
if (cs->jobs_in_queue_cnt[i]) {
switch (q->queue_type) {
case QUEUE_TYPE_EXT:
@@ -543,11 +527,12 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
break;
}
- if (rc)
+ if (rc) {
+ ctx->cs_counters.queue_full_drop_cnt++;
goto unroll_cq_resv;
+ }
- if (q->queue_type == QUEUE_TYPE_EXT ||
- q->queue_type == QUEUE_TYPE_HW)
+ if (q->queue_type == QUEUE_TYPE_EXT)
cq_cnt++;
}
}
@@ -598,10 +583,9 @@ int hl_hw_queue_schedule_cs(struct hl_cs *cs)
unroll_cq_resv:
q = &hdev->kernel_queues[0];
- for (i = 0 ; (i < HL_MAX_QUEUES) && (cq_cnt > 0) ; i++, q++) {
- if ((q->queue_type == QUEUE_TYPE_EXT ||
- q->queue_type == QUEUE_TYPE_HW) &&
- cs->jobs_in_queue_cnt[i]) {
+ for (i = 0 ; (i < max_queues) && (cq_cnt > 0) ; i++, q++) {
+ if ((q->queue_type == QUEUE_TYPE_EXT) &&
+ (cs->jobs_in_queue_cnt[i])) {
atomic_t *free_slots =
&hdev->completion_queue[i].free_slots_cnt;
atomic_add(cs->jobs_in_queue_cnt[i], free_slots);
@@ -625,7 +609,7 @@ void hl_hw_queue_inc_ci_kernel(struct hl_device *hdev, u32 hw_queue_id)
{
struct hl_hw_queue *q = &hdev->kernel_queues[hw_queue_id];
- q->ci = hl_queue_inc_ptr(q->ci);
+ atomic_inc(&q->ci);
}
static int ext_and_cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
@@ -660,12 +644,9 @@ static int ext_and_cpu_queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
}
/* Make sure read/write pointers are initialized to start of queue */
- q->ci = 0;
+ atomic_set(&q->ci, 0);
q->pi = 0;
- if (!is_cpu_queue)
- hdev->asic_funcs->ext_queue_init(hdev, q->hw_queue_id);
-
return 0;
free_queue:
@@ -697,7 +678,7 @@ static int int_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
q->kernel_address = (u64) (uintptr_t) p;
q->pi = 0;
- q->ci = 0;
+ atomic_set(&q->ci, 0);
return 0;
}
@@ -726,12 +707,48 @@ static int hw_queue_init(struct hl_device *hdev, struct hl_hw_queue *q)
q->kernel_address = (u64) (uintptr_t) p;
/* Make sure read/write pointers are initialized to start of queue */
- q->ci = 0;
+ atomic_set(&q->ci, 0);
q->pi = 0;
return 0;
}
+static void sync_stream_queue_init(struct hl_device *hdev, u32 q_idx)
+{
+ struct hl_hw_queue *hw_queue = &hdev->kernel_queues[q_idx];
+ struct asic_fixed_properties *prop = &hdev->asic_prop;
+ struct hl_hw_sob *hw_sob;
+ int sob, queue_idx = hdev->sync_stream_queue_idx++;
+
+ hw_queue->base_sob_id =
+ prop->sync_stream_first_sob + queue_idx * HL_RSVD_SOBS;
+ hw_queue->base_mon_id =
+ prop->sync_stream_first_mon + queue_idx * HL_RSVD_MONS;
+ hw_queue->next_sob_val = 1;
+ hw_queue->curr_sob_offset = 0;
+
+ for (sob = 0 ; sob < HL_RSVD_SOBS ; sob++) {
+ hw_sob = &hw_queue->hw_sob[sob];
+ hw_sob->hdev = hdev;
+ hw_sob->sob_id = hw_queue->base_sob_id + sob;
+ hw_sob->q_idx = q_idx;
+ kref_init(&hw_sob->kref);
+ }
+}
+
+static void sync_stream_queue_reset(struct hl_device *hdev, u32 q_idx)
+{
+ struct hl_hw_queue *hw_queue = &hdev->kernel_queues[q_idx];
+
+ /*
+ * In case we got here due to a stuck CS, the refcnt might be bigger
+ * than 1 and therefore we reset it.
+ */
+ kref_init(&hw_queue->hw_sob[hw_queue->curr_sob_offset].kref);
+ hw_queue->curr_sob_offset = 0;
+ hw_queue->next_sob_val = 1;
+}
+
/*
* queue_init - main initialization function for H/W queue object
*
@@ -747,8 +764,6 @@ static int queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
{
int rc;
- BUILD_BUG_ON(HL_QUEUE_SIZE_IN_BYTES > HL_PAGE_SIZE);
-
q->hw_queue_id = hw_queue_id;
switch (q->queue_type) {
@@ -774,6 +789,9 @@ static int queue_init(struct hl_device *hdev, struct hl_hw_queue *q,
break;
}
+ if (q->supports_sync_stream)
+ sync_stream_queue_init(hdev, q->hw_queue_id);
+
if (rc)
return rc;
@@ -835,7 +853,7 @@ int hl_hw_queues_create(struct hl_device *hdev)
struct hl_hw_queue *q;
int i, rc, q_ready_cnt;
- hdev->kernel_queues = kcalloc(HL_MAX_QUEUES,
+ hdev->kernel_queues = kcalloc(asic->max_queues,
sizeof(*hdev->kernel_queues), GFP_KERNEL);
if (!hdev->kernel_queues) {
@@ -845,9 +863,11 @@ int hl_hw_queues_create(struct hl_device *hdev)
/* Initialize the H/W queues */
for (i = 0, q_ready_cnt = 0, q = hdev->kernel_queues;
- i < HL_MAX_QUEUES ; i++, q_ready_cnt++, q++) {
+ i < asic->max_queues ; i++, q_ready_cnt++, q++) {
q->queue_type = asic->hw_queues_props[i].type;
+ q->supports_sync_stream =
+ asic->hw_queues_props[i].supports_sync_stream;
rc = queue_init(hdev, q, i);
if (rc) {
dev_err(hdev->dev,
@@ -870,9 +890,10 @@ release_queues:
void hl_hw_queues_destroy(struct hl_device *hdev)
{
struct hl_hw_queue *q;
+ u32 max_queues = hdev->asic_prop.max_queues;
int i;
- for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++)
+ for (i = 0, q = hdev->kernel_queues ; i < max_queues ; i++, q++)
queue_fini(hdev, q);
kfree(hdev->kernel_queues);
@@ -881,15 +902,17 @@ void hl_hw_queues_destroy(struct hl_device *hdev)
void hl_hw_queue_reset(struct hl_device *hdev, bool hard_reset)
{
struct hl_hw_queue *q;
+ u32 max_queues = hdev->asic_prop.max_queues;
int i;
- for (i = 0, q = hdev->kernel_queues ; i < HL_MAX_QUEUES ; i++, q++) {
+ for (i = 0, q = hdev->kernel_queues ; i < max_queues ; i++, q++) {
if ((!q->valid) ||
((!hard_reset) && (q->queue_type == QUEUE_TYPE_CPU)))
continue;
- q->pi = q->ci = 0;
+ q->pi = 0;
+ atomic_set(&q->ci, 0);
- if (q->queue_type == QUEUE_TYPE_EXT)
- hdev->asic_funcs->ext_queue_reset(hdev, q->hw_queue_id);
+ if (q->supports_sync_stream)
+ sync_stream_queue_reset(hdev, q->hw_queue_id);
}
}
diff --git a/drivers/misc/habanalabs/hwmon.c b/drivers/misc/habanalabs/common/hwmon.c
index b997336fa75f..b997336fa75f 100644
--- a/drivers/misc/habanalabs/hwmon.c
+++ b/drivers/misc/habanalabs/common/hwmon.c
diff --git a/drivers/misc/habanalabs/irq.c b/drivers/misc/habanalabs/common/irq.c
index fac65fbd70e8..c8db717023f5 100644
--- a/drivers/misc/habanalabs/irq.c
+++ b/drivers/misc/habanalabs/common/irq.c
@@ -10,11 +10,12 @@
#include <linux/slab.h>
/**
- * This structure is used to schedule work of EQ entry and armcp_reset event
+ * struct hl_eqe_work - This structure is used to schedule work of EQ
+ * entry and armcp_reset event
*
- * @eq_work - workqueue object to run when EQ entry is received
- * @hdev - pointer to device structure
- * @eq_entry - copy of the EQ entry
+ * @eq_work: workqueue object to run when EQ entry is received
+ * @hdev: pointer to device structure
+ * @eq_entry: copy of the EQ entry
*/
struct hl_eqe_work {
struct work_struct eq_work;
@@ -22,7 +23,7 @@ struct hl_eqe_work {
struct hl_eq_entry eq_entry;
};
-/*
+/**
* hl_cq_inc_ptr - increment ci or pi of cq
*
* @ptr: the current ci or pi value of the completion queue
@@ -38,7 +39,7 @@ inline u32 hl_cq_inc_ptr(u32 ptr)
return ptr;
}
-/*
+/**
* hl_eq_inc_ptr - increment ci of eq
*
* @ptr: the current ci value of the event queue
@@ -65,7 +66,7 @@ static void irq_handle_eqe(struct work_struct *work)
kfree(eqe_work);
}
-/*
+/**
* hl_irq_handler_cq - irq handler for completion queue
*
* @irq: irq number
@@ -118,15 +119,10 @@ irqreturn_t hl_irq_handler_cq(int irq, void *arg)
if ((shadow_index_valid) && (!hdev->disabled)) {
job = queue->shadow_queue[hl_pi_2_offset(shadow_index)];
- queue_work(hdev->cq_wq, &job->finish_work);
+ queue_work(hdev->cq_wq[cq->cq_idx], &job->finish_work);
}
- /* Update ci of the context's queue. There is no
- * need to protect it with spinlock because this update is
- * done only inside IRQ and there is a different IRQ per
- * queue
- */
- queue->ci = hl_queue_inc_ptr(queue->ci);
+ atomic_inc(&queue->ci);
/* Clear CQ entry ready bit */
cq_entry->data = cpu_to_le32(le32_to_cpu(cq_entry->data) &
@@ -141,7 +137,7 @@ irqreturn_t hl_irq_handler_cq(int irq, void *arg)
return IRQ_HANDLED;
}
-/*
+/**
* hl_irq_handler_eq - irq handler for event queue
*
* @irq: irq number
@@ -205,7 +201,7 @@ skip_irq:
return IRQ_HANDLED;
}
-/*
+/**
* hl_cq_init - main initialization function for an cq object
*
* @hdev: pointer to device structure
@@ -219,8 +215,6 @@ int hl_cq_init(struct hl_device *hdev, struct hl_cq *q, u32 hw_queue_id)
{
void *p;
- BUILD_BUG_ON(HL_CQ_SIZE_IN_BYTES > HL_PAGE_SIZE);
-
p = hdev->asic_funcs->asic_dma_alloc_coherent(hdev, HL_CQ_SIZE_IN_BYTES,
&q->bus_address, GFP_KERNEL | __GFP_ZERO);
if (!p)
@@ -237,7 +231,7 @@ int hl_cq_init(struct hl_device *hdev, struct hl_cq *q, u32 hw_queue_id)
return 0;
}
-/*
+/**
* hl_cq_fini - destroy completion queue
*
* @hdev: pointer to device structure
@@ -268,7 +262,7 @@ void hl_cq_reset(struct hl_device *hdev, struct hl_cq *q)
memset((void *) (uintptr_t) q->kernel_address, 0, HL_CQ_SIZE_IN_BYTES);
}
-/*
+/**
* hl_eq_init - main initialization function for an event queue object
*
* @hdev: pointer to device structure
@@ -281,8 +275,6 @@ int hl_eq_init(struct hl_device *hdev, struct hl_eq *q)
{
void *p;
- BUILD_BUG_ON(HL_EQ_SIZE_IN_BYTES > HL_PAGE_SIZE);
-
p = hdev->asic_funcs->cpu_accessible_dma_pool_alloc(hdev,
HL_EQ_SIZE_IN_BYTES,
&q->bus_address);
@@ -296,7 +288,7 @@ int hl_eq_init(struct hl_device *hdev, struct hl_eq *q)
return 0;
}
-/*
+/**
* hl_eq_fini - destroy event queue
*
* @hdev: pointer to device structure
diff --git a/drivers/misc/habanalabs/memory.c b/drivers/misc/habanalabs/common/memory.c
index 47da84a17719..dce9273e557a 100644
--- a/drivers/misc/habanalabs/memory.c
+++ b/drivers/misc/habanalabs/common/memory.c
@@ -7,7 +7,7 @@
#include <uapi/misc/habanalabs.h>
#include "habanalabs.h"
-#include "include/hw_ip/mmu/mmu_general.h"
+#include "../include/hw_ip/mmu/mmu_general.h"
#include <linux/uaccess.h>
#include <linux/slab.h>
@@ -1730,8 +1730,7 @@ void hl_vm_ctx_fini(struct hl_ctx *ctx)
*/
if (!hdev->hard_reset_pending && !hash_empty(ctx->mem_hash))
dev_notice(hdev->dev,
- "ctx %d is freed while it has va in use\n",
- ctx->asid);
+ "user released device without removing its memory mappings\n");
hash_for_each_safe(ctx->mem_hash, i, tmp_node, hnode, node) {
dev_dbg(hdev->dev,
diff --git a/drivers/misc/habanalabs/mmu.c b/drivers/misc/habanalabs/common/mmu.c
index a290d6b49d78..edcc11d5eaf1 100644
--- a/drivers/misc/habanalabs/mmu.c
+++ b/drivers/misc/habanalabs/common/mmu.c
@@ -6,7 +6,7 @@
*/
#include "habanalabs.h"
-#include "include/hw_ip/mmu/mmu_general.h"
+#include "../include/hw_ip/mmu/mmu_general.h"
#include <linux/genalloc.h>
#include <linux/slab.h>
@@ -502,7 +502,6 @@ int hl_mmu_ctx_init(struct hl_ctx *ctx)
return 0;
mutex_init(&ctx->mmu_lock);
- hash_init(ctx->mmu_phys_hash);
hash_init(ctx->mmu_shadow_hash);
return dram_default_mapping_init(ctx);
diff --git a/drivers/misc/habanalabs/pci.c b/drivers/misc/habanalabs/common/pci.c
index 9f634ef6f5b3..7bd3737571f3 100644
--- a/drivers/misc/habanalabs/pci.c
+++ b/drivers/misc/habanalabs/common/pci.c
@@ -6,16 +6,22 @@
*/
#include "habanalabs.h"
-#include "include/hw_ip/pci/pci_general.h"
+#include "../include/hw_ip/pci/pci_general.h"
#include <linux/pci.h>
+#include <linux/bitfield.h>
#define HL_PLDM_PCI_ELBI_TIMEOUT_MSEC (HL_PCI_ELBI_TIMEOUT_MSEC * 10)
+#define IATU_REGION_CTRL_REGION_EN_MASK BIT(31)
+#define IATU_REGION_CTRL_MATCH_MODE_MASK BIT(30)
+#define IATU_REGION_CTRL_NUM_MATCH_EN_MASK BIT(19)
+#define IATU_REGION_CTRL_BAR_NUM_MASK GENMASK(10, 8)
+
/**
* hl_pci_bars_map() - Map PCI BARs.
* @hdev: Pointer to hl_device structure.
- * @bar_name: Array of BAR names.
+ * @name: Array of BAR names.
* @is_wc: Array with flag per BAR whether a write-combined mapping is needed.
*
* Request PCI regions and map them to kernel virtual addresses.
@@ -61,7 +67,7 @@ err:
return rc;
}
-/*
+/**
* hl_pci_bars_unmap() - Unmap PCI BARS.
* @hdev: Pointer to hl_device structure.
*
@@ -80,9 +86,11 @@ static void hl_pci_bars_unmap(struct hl_device *hdev)
pci_release_regions(pdev);
}
-/*
+/**
* hl_pci_elbi_write() - Write through the ELBI interface.
* @hdev: Pointer to hl_device structure.
+ * @addr: Address to write to
+ * @data: Data to write
*
* Return: 0 on success, negative value for failure.
*/
@@ -140,6 +148,8 @@ static int hl_pci_elbi_write(struct hl_device *hdev, u64 addr, u32 data)
/**
* hl_pci_iatu_write() - iatu write routine.
* @hdev: Pointer to hl_device structure.
+ * @addr: Address to write to
+ * @data: Data to write
*
* Return: 0 on success, negative value for failure.
*/
@@ -161,7 +171,7 @@ int hl_pci_iatu_write(struct hl_device *hdev, u32 addr, u32 data)
return 0;
}
-/*
+/**
* hl_pci_reset_link_through_bridge() - Reset PCI link.
* @hdev: Pointer to hl_device structure.
*/
@@ -183,110 +193,94 @@ static void hl_pci_reset_link_through_bridge(struct hl_device *hdev)
}
/**
- * hl_pci_set_dram_bar_base() - Set DDR BAR to map specific device address.
+ * hl_pci_set_inbound_region() - Configure inbound region
* @hdev: Pointer to hl_device structure.
- * @inbound_region: Inbound region number.
- * @bar: PCI BAR number.
- * @addr: Address in DRAM. Must be aligned to DRAM bar size.
+ * @region: Inbound region number.
+ * @pci_region: Inbound region parameters.
*
- * Configure the iATU so that the DRAM bar will start at the specified address.
+ * Configure the iATU inbound region.
*
* Return: 0 on success, negative value for failure.
*/
-int hl_pci_set_dram_bar_base(struct hl_device *hdev, u8 inbound_region, u8 bar,
- u64 addr)
+int hl_pci_set_inbound_region(struct hl_device *hdev, u8 region,
+ struct hl_inbound_pci_region *pci_region)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
- u32 offset;
- int rc;
+ u64 bar_phys_base, region_base, region_end_address;
+ u32 offset, ctrl_reg_val;
+ int rc = 0;
- switch (inbound_region) {
- case 0:
- offset = 0x100;
- break;
- case 1:
- offset = 0x300;
- break;
- case 2:
- offset = 0x500;
- break;
- default:
- dev_err(hdev->dev, "Invalid inbound region %d\n",
- inbound_region);
- return -EINVAL;
- }
+ /* region offset */
+ offset = (0x200 * region) + 0x100;
+
+ if (pci_region->mode == PCI_ADDRESS_MATCH_MODE) {
+ bar_phys_base = hdev->pcie_bar_phys[pci_region->bar];
+ region_base = bar_phys_base + pci_region->offset_in_bar;
+ region_end_address = region_base + pci_region->size - 1;
- if (bar != 0 && bar != 2 && bar != 4) {
- dev_err(hdev->dev, "Invalid PCI BAR %d\n", bar);
- return -EINVAL;
+ rc |= hl_pci_iatu_write(hdev, offset + 0x8,
+ lower_32_bits(region_base));
+ rc |= hl_pci_iatu_write(hdev, offset + 0xC,
+ upper_32_bits(region_base));
+ rc |= hl_pci_iatu_write(hdev, offset + 0x10,
+ lower_32_bits(region_end_address));
}
/* Point to the specified address */
- rc = hl_pci_iatu_write(hdev, offset + 0x14, lower_32_bits(addr));
- rc |= hl_pci_iatu_write(hdev, offset + 0x18, upper_32_bits(addr));
+ rc = hl_pci_iatu_write(hdev, offset + 0x14,
+ lower_32_bits(pci_region->addr));
+ rc |= hl_pci_iatu_write(hdev, offset + 0x18,
+ upper_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, offset + 0x0, 0);
- /* Enable + BAR match + match enable + BAR number */
- rc |= hl_pci_iatu_write(hdev, offset + 0x4, 0xC0080000 | (bar << 8));
+
+ /* Enable + bar/address match + match enable + bar number */
+ ctrl_reg_val = FIELD_PREP(IATU_REGION_CTRL_REGION_EN_MASK, 1);
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_MATCH_MODE_MASK,
+ pci_region->mode);
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_NUM_MATCH_EN_MASK, 1);
+
+ if (pci_region->mode == PCI_BAR_MATCH_MODE)
+ ctrl_reg_val |= FIELD_PREP(IATU_REGION_CTRL_BAR_NUM_MASK,
+ pci_region->bar);
+
+ rc |= hl_pci_iatu_write(hdev, offset + 0x4, ctrl_reg_val);
/* Return the DBI window to the default location */
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0);
if (rc)
- dev_err(hdev->dev, "failed to map DRAM bar to 0x%08llx\n",
- addr);
+ dev_err(hdev->dev, "failed to map bar %u to 0x%08llx\n",
+ pci_region->bar, pci_region->addr);
return rc;
}
/**
- * hl_pci_init_iatu() - Initialize the iATU unit inside the PCI controller.
+ * hl_pci_set_outbound_region() - Configure outbound region 0
* @hdev: Pointer to hl_device structure.
- * @sram_base_address: SRAM base address.
- * @dram_base_address: DRAM base address.
- * @host_phys_base_address: Base physical address of host memory for device
- * transactions.
- * @host_phys_size: Size of host memory for device transactions.
+ * @pci_region: Outbound region parameters.
*
- * This is needed in case the firmware doesn't initialize the iATU.
+ * Configure the iATU outbound region 0.
*
* Return: 0 on success, negative value for failure.
*/
-int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address,
- u64 dram_base_address, u64 host_phys_base_address,
- u64 host_phys_size)
+int hl_pci_set_outbound_region(struct hl_device *hdev,
+ struct hl_outbound_pci_region *pci_region)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
- u64 host_phys_end_addr;
+ u64 outbound_region_end_address;
int rc = 0;
- /* Inbound Region 0 - Bar 0 - Point to SRAM base address */
- rc = hl_pci_iatu_write(hdev, 0x114, lower_32_bits(sram_base_address));
- rc |= hl_pci_iatu_write(hdev, 0x118, upper_32_bits(sram_base_address));
- rc |= hl_pci_iatu_write(hdev, 0x100, 0);
- /* Enable + Bar match + match enable */
- rc |= hl_pci_iatu_write(hdev, 0x104, 0xC0080000);
-
- /* Return the DBI window to the default location */
- rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
- rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0);
-
- hdev->asic_funcs->set_dma_mask_from_fw(hdev);
-
- /* Point to DRAM */
- if (!hdev->asic_funcs->set_dram_bar_base)
- return -EINVAL;
- if (hdev->asic_funcs->set_dram_bar_base(hdev, dram_base_address) ==
- U64_MAX)
- return -EIO;
-
- /* Outbound Region 0 - Point to Host */
- host_phys_end_addr = host_phys_base_address + host_phys_size - 1;
+ /* Outbound Region 0 */
+ outbound_region_end_address =
+ pci_region->addr + pci_region->size - 1;
rc |= hl_pci_iatu_write(hdev, 0x008,
- lower_32_bits(host_phys_base_address));
+ lower_32_bits(pci_region->addr));
rc |= hl_pci_iatu_write(hdev, 0x00C,
- upper_32_bits(host_phys_base_address));
- rc |= hl_pci_iatu_write(hdev, 0x010, lower_32_bits(host_phys_end_addr));
+ upper_32_bits(pci_region->addr));
+ rc |= hl_pci_iatu_write(hdev, 0x010,
+ lower_32_bits(outbound_region_end_address));
rc |= hl_pci_iatu_write(hdev, 0x014, 0);
if ((hdev->power9_64bit_dma_enable) && (hdev->dma_mask == 64))
@@ -294,7 +288,8 @@ int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address,
else
rc |= hl_pci_iatu_write(hdev, 0x018, 0);
- rc |= hl_pci_iatu_write(hdev, 0x020, upper_32_bits(host_phys_end_addr));
+ rc |= hl_pci_iatu_write(hdev, 0x020,
+ upper_32_bits(outbound_region_end_address));
/* Increase region size */
rc |= hl_pci_iatu_write(hdev, 0x000, 0x00002000);
/* Enable */
@@ -304,16 +299,12 @@ int hl_pci_init_iatu(struct hl_device *hdev, u64 sram_base_address,
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr, 0);
rc |= hl_pci_elbi_write(hdev, prop->pcie_aux_dbi_reg_addr + 4, 0);
- if (rc)
- return -EIO;
-
- return 0;
+ return rc;
}
/**
* hl_pci_set_dma_mask() - Set DMA masks for the device.
* @hdev: Pointer to hl_device structure.
- * @dma_mask: number of bits for the requested dma mask.
*
* This function sets the DMA masks (regular and consistent) for a specified
* value. If it doesn't succeed, it tries to set it to a fall-back value
diff --git a/drivers/misc/habanalabs/sysfs.c b/drivers/misc/habanalabs/common/sysfs.c
index 70b6b1863c2e..b3cb0ac4721c 100644
--- a/drivers/misc/habanalabs/sysfs.c
+++ b/drivers/misc/habanalabs/common/sysfs.c
@@ -331,6 +331,9 @@ static ssize_t eeprom_read_handler(struct file *filp, struct kobject *kobj,
char *data;
int rc;
+ if (hl_device_disabled_or_in_reset(hdev))
+ return -ENODEV;
+
if (!max_size)
return -EINVAL;
diff --git a/drivers/misc/habanalabs/gaudi/Makefile b/drivers/misc/habanalabs/gaudi/Makefile
index f802cdc980ca..c9f4703cff24 100644
--- a/drivers/misc/habanalabs/gaudi/Makefile
+++ b/drivers/misc/habanalabs/gaudi/Makefile
@@ -1,5 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-subdir-ccflags-y += -I$(src)
-
HL_GAUDI_FILES := gaudi/gaudi.o gaudi/gaudi_hwmgr.o gaudi/gaudi_security.o \
gaudi/gaudi_coresight.o
diff --git a/drivers/misc/habanalabs/gaudi/gaudi.c b/drivers/misc/habanalabs/gaudi/gaudi.c
index 637a9d608707..00a0a7238d81 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi.c
@@ -6,12 +6,12 @@
*/
#include "gaudiP.h"
-#include "include/hw_ip/mmu/mmu_general.h"
-#include "include/hw_ip/mmu/mmu_v1_1.h"
-#include "include/gaudi/gaudi_masks.h"
-#include "include/gaudi/gaudi_fw_if.h"
-#include "include/gaudi/gaudi_reg_map.h"
-#include "include/gaudi/gaudi_async_ids_map_extended.h"
+#include "../include/hw_ip/mmu/mmu_general.h"
+#include "../include/hw_ip/mmu/mmu_v1_1.h"
+#include "../include/gaudi/gaudi_masks.h"
+#include "../include/gaudi/gaudi_fw_if.h"
+#include "../include/gaudi/gaudi_reg_map.h"
+#include "../include/gaudi/gaudi_async_ids_map_extended.h"
#include <linux/module.h>
#include <linux/pci.h>
@@ -21,6 +21,7 @@
#include <linux/io-64-nonatomic-lo-hi.h>
#include <linux/iommu.h>
#include <linux/seq_file.h>
+#include <linux/bitfield.h>
/*
* Gaudi security scheme:
@@ -74,7 +75,6 @@
#define GAUDI_PLDM_RESET_WAIT_MSEC 1000 /* 1s */
#define GAUDI_PLDM_HRESET_TIMEOUT_MSEC 20000 /* 20s */
-#define GAUDI_PLDM_SRESET_TIMEOUT_MSEC 14000 /* 14s */
#define GAUDI_PLDM_TEST_QUEUE_WAIT_USEC 1000000 /* 1s */
#define GAUDI_PLDM_MMU_TIMEOUT_USEC (MMU_CONFIG_TIMEOUT_USEC * 100)
#define GAUDI_PLDM_QMAN0_TIMEOUT_USEC (HL_DEVICE_TIMEOUT_USEC * 30)
@@ -321,6 +321,13 @@ static enum hl_queue_type gaudi_queue_type[GAUDI_QUEUE_ID_SIZE] = {
QUEUE_TYPE_NA, /* GAUDI_QUEUE_ID_NIC_9_3 */
};
+struct ecc_info_extract_params {
+ u64 block_address;
+ u32 num_memories;
+ bool derr;
+ bool disable_clock_gating;
+};
+
static int gaudi_mmu_update_asid_hop0_addr(struct hl_device *hdev, u32 asid,
u64 phys_addr);
static int gaudi_send_job_on_qman0(struct hl_device *hdev,
@@ -339,22 +346,25 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
struct asic_fixed_properties *prop = &hdev->asic_prop;
int i;
- if (GAUDI_QUEUE_ID_SIZE >= HL_MAX_QUEUES) {
- dev_err(hdev->dev,
- "Number of H/W queues must be smaller than %d\n",
- HL_MAX_QUEUES);
- return -EFAULT;
- }
+ prop->max_queues = GAUDI_QUEUE_ID_SIZE;
+ prop->hw_queues_props = kcalloc(prop->max_queues,
+ sizeof(struct hw_queue_properties),
+ GFP_KERNEL);
- for (i = 0 ; i < GAUDI_QUEUE_ID_SIZE ; i++) {
+ if (!prop->hw_queues_props)
+ return -ENOMEM;
+
+ for (i = 0 ; i < prop->max_queues ; i++) {
if (gaudi_queue_type[i] == QUEUE_TYPE_EXT) {
prop->hw_queues_props[i].type = QUEUE_TYPE_EXT;
prop->hw_queues_props[i].driver_only = 0;
prop->hw_queues_props[i].requires_kernel_cb = 1;
+ prop->hw_queues_props[i].supports_sync_stream = 1;
} else if (gaudi_queue_type[i] == QUEUE_TYPE_CPU) {
prop->hw_queues_props[i].type = QUEUE_TYPE_CPU;
prop->hw_queues_props[i].driver_only = 1;
prop->hw_queues_props[i].requires_kernel_cb = 0;
+ prop->hw_queues_props[i].supports_sync_stream = 0;
} else if (gaudi_queue_type[i] == QUEUE_TYPE_INT) {
prop->hw_queues_props[i].type = QUEUE_TYPE_INT;
prop->hw_queues_props[i].driver_only = 0;
@@ -363,14 +373,13 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
prop->hw_queues_props[i].type = QUEUE_TYPE_NA;
prop->hw_queues_props[i].driver_only = 0;
prop->hw_queues_props[i].requires_kernel_cb = 0;
+ prop->hw_queues_props[i].supports_sync_stream = 0;
}
}
- for (; i < HL_MAX_QUEUES; i++)
- prop->hw_queues_props[i].type = QUEUE_TYPE_NA;
-
prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
-
+ prop->sync_stream_first_sob = 0;
+ prop->sync_stream_first_mon = 0;
prop->dram_base_address = DRAM_PHYS_BASE;
prop->dram_size = GAUDI_HBM_SIZE_32GB;
prop->dram_end_address = prop->dram_base_address +
@@ -435,6 +444,8 @@ static int gaudi_get_fixed_properties(struct hl_device *hdev)
strncpy(prop->armcp_info.card_name, GAUDI_DEFAULT_CARD_NAME,
CARD_NAME_MAX_LEN);
+ prop->max_pending_cs = GAUDI_MAX_PENDING_CS;
+
return 0;
}
@@ -457,6 +468,7 @@ static int gaudi_pci_bars_map(struct hl_device *hdev)
static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr)
{
struct gaudi_device *gaudi = hdev->asic_specific;
+ struct hl_inbound_pci_region pci_region;
u64 old_addr = addr;
int rc;
@@ -464,7 +476,10 @@ static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr)
return old_addr;
/* Inbound Region 2 - Bar 4 - Point to HBM */
- rc = hl_pci_set_dram_bar_base(hdev, 2, 4, addr);
+ pci_region.mode = PCI_BAR_MATCH_MODE;
+ pci_region.bar = HBM_BAR_ID;
+ pci_region.addr = addr;
+ rc = hl_pci_set_inbound_region(hdev, 2, &pci_region);
if (rc)
return U64_MAX;
@@ -478,22 +493,43 @@ static u64 gaudi_set_hbm_bar_base(struct hl_device *hdev, u64 addr)
static int gaudi_init_iatu(struct hl_device *hdev)
{
- int rc = 0;
+ struct hl_inbound_pci_region inbound_region;
+ struct hl_outbound_pci_region outbound_region;
+ int rc;
+
+ /* Inbound Region 0 - Bar 0 - Point to SRAM + CFG */
+ inbound_region.mode = PCI_BAR_MATCH_MODE;
+ inbound_region.bar = SRAM_BAR_ID;
+ inbound_region.addr = SRAM_BASE_ADDR;
+ rc = hl_pci_set_inbound_region(hdev, 0, &inbound_region);
+ if (rc)
+ goto done;
/* Inbound Region 1 - Bar 2 - Point to SPI FLASH */
- rc = hl_pci_iatu_write(hdev, 0x314,
- lower_32_bits(SPI_FLASH_BASE_ADDR));
- rc |= hl_pci_iatu_write(hdev, 0x318,
- upper_32_bits(SPI_FLASH_BASE_ADDR));
- rc |= hl_pci_iatu_write(hdev, 0x300, 0);
- /* Enable + Bar match + match enable */
- rc |= hl_pci_iatu_write(hdev, 0x304, 0xC0080200);
+ inbound_region.mode = PCI_BAR_MATCH_MODE;
+ inbound_region.bar = CFG_BAR_ID;
+ inbound_region.addr = SPI_FLASH_BASE_ADDR;
+ rc = hl_pci_set_inbound_region(hdev, 1, &inbound_region);
+ if (rc)
+ goto done;
+ /* Inbound Region 2 - Bar 4 - Point to HBM */
+ inbound_region.mode = PCI_BAR_MATCH_MODE;
+ inbound_region.bar = HBM_BAR_ID;
+ inbound_region.addr = DRAM_PHYS_BASE;
+ rc = hl_pci_set_inbound_region(hdev, 2, &inbound_region);
if (rc)
- return -EIO;
+ goto done;
- return hl_pci_init_iatu(hdev, SRAM_BASE_ADDR, DRAM_PHYS_BASE,
- HOST_PHYS_BASE, HOST_PHYS_SIZE);
+ hdev->asic_funcs->set_dma_mask_from_fw(hdev);
+
+ /* Outbound Region 0 - Point to Host */
+ outbound_region.addr = HOST_PHYS_BASE;
+ outbound_region.size = HOST_PHYS_SIZE;
+ rc = hl_pci_set_outbound_region(hdev, &outbound_region);
+
+done:
+ return rc;
}
static int gaudi_early_init(struct hl_device *hdev)
@@ -516,7 +552,8 @@ static int gaudi_early_init(struct hl_device *hdev)
(unsigned long long) pci_resource_len(pdev,
SRAM_BAR_ID),
SRAM_BAR_SIZE);
- return -ENODEV;
+ rc = -ENODEV;
+ goto free_queue_props;
}
if (pci_resource_len(pdev, CFG_BAR_ID) != CFG_BAR_SIZE) {
@@ -526,20 +563,26 @@ static int gaudi_early_init(struct hl_device *hdev)
(unsigned long long) pci_resource_len(pdev,
CFG_BAR_ID),
CFG_BAR_SIZE);
- return -ENODEV;
+ rc = -ENODEV;
+ goto free_queue_props;
}
prop->dram_pci_bar_size = pci_resource_len(pdev, HBM_BAR_ID);
rc = hl_pci_init(hdev);
if (rc)
- return rc;
+ goto free_queue_props;
return 0;
+
+free_queue_props:
+ kfree(hdev->asic_prop.hw_queues_props);
+ return rc;
}
static int gaudi_early_fini(struct hl_device *hdev)
{
+ kfree(hdev->asic_prop.hw_queues_props);
hl_pci_fini(hdev);
return 0;
@@ -554,11 +597,36 @@ static int gaudi_early_fini(struct hl_device *hdev)
static void gaudi_fetch_psoc_frequency(struct hl_device *hdev)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u32 trace_freq = 0;
+ u32 pll_clk = 0;
+ u32 div_fctr = RREG32(mmPSOC_CPU_PLL_DIV_FACTOR_2);
+ u32 div_sel = RREG32(mmPSOC_CPU_PLL_DIV_SEL_2);
+ u32 nr = RREG32(mmPSOC_CPU_PLL_NR);
+ u32 nf = RREG32(mmPSOC_CPU_PLL_NF);
+ u32 od = RREG32(mmPSOC_CPU_PLL_OD);
+
+ if (div_sel == DIV_SEL_REF_CLK || div_sel == DIV_SEL_DIVIDED_REF) {
+ if (div_sel == DIV_SEL_REF_CLK)
+ trace_freq = PLL_REF_CLK;
+ else
+ trace_freq = PLL_REF_CLK / (div_fctr + 1);
+ } else if (div_sel == DIV_SEL_PLL_CLK ||
+ div_sel == DIV_SEL_DIVIDED_PLL) {
+ pll_clk = PLL_REF_CLK * (nf + 1) / ((nr + 1) * (od + 1));
+ if (div_sel == DIV_SEL_PLL_CLK)
+ trace_freq = pll_clk;
+ else
+ trace_freq = pll_clk / (div_fctr + 1);
+ } else {
+ dev_warn(hdev->dev,
+ "Received invalid div select value: %d", div_sel);
+ }
- prop->psoc_pci_pll_nr = RREG32(mmPSOC_PCI_PLL_NR);
- prop->psoc_pci_pll_nf = RREG32(mmPSOC_PCI_PLL_NF);
- prop->psoc_pci_pll_od = RREG32(mmPSOC_PCI_PLL_OD);
- prop->psoc_pci_pll_div_factor = RREG32(mmPSOC_PCI_PLL_DIV_FACTOR_1);
+ prop->psoc_timestamp_frequency = trace_freq;
+ prop->psoc_pci_pll_nr = nr;
+ prop->psoc_pci_pll_nf = nf;
+ prop->psoc_pci_pll_od = od;
+ prop->psoc_pci_pll_div_factor = div_fctr;
}
static int _gaudi_init_tpc_mem(struct hl_device *hdev,
@@ -573,7 +641,7 @@ static int _gaudi_init_tpc_mem(struct hl_device *hdev,
u8 tpc_id;
int rc;
- cb = hl_cb_kernel_create(hdev, PAGE_SIZE);
+ cb = hl_cb_kernel_create(hdev, PAGE_SIZE, false);
if (!cb)
return -EFAULT;
@@ -1644,8 +1712,8 @@ static void gaudi_init_hbm_cred(struct hl_device *hdev)
uint32_t hbm0_wr, hbm1_wr, hbm0_rd, hbm1_rd;
hbm0_wr = 0x33333333;
- hbm1_wr = 0x33333333;
hbm0_rd = 0x77777777;
+ hbm1_wr = 0x55555555;
hbm1_rd = 0xDDDDDDDD;
WREG32(mmDMA_IF_E_N_HBM0_WR_CRED_CNT, hbm0_wr);
@@ -1695,125 +1763,6 @@ static void gaudi_init_hbm_cred(struct hl_device *hdev)
(1 << DMA_IF_HBM_CRED_EN_WRITE_CREDIT_EN_SHIFT));
}
-static void gaudi_init_rate_limiter(struct hl_device *hdev)
-{
- u32 nr, nf, od, sat, rst, timeout;
- u64 freq;
-
- nr = RREG32(mmPSOC_HBM_PLL_NR);
- nf = RREG32(mmPSOC_HBM_PLL_NF);
- od = RREG32(mmPSOC_HBM_PLL_OD);
- freq = (50 * (nf + 1)) / ((nr + 1) * (od + 1));
-
- dev_dbg(hdev->dev, "HBM frequency is %lluMHz\n", freq);
-
- /* Configuration is for five (5) DDMA channels */
- if (freq == 800) {
- sat = 4;
- rst = 11;
- timeout = 15;
- } else if (freq == 900) {
- sat = 4;
- rst = 15;
- timeout = 16;
- } else if (freq == 950) {
- sat = 4;
- rst = 15;
- timeout = 15;
- } else {
- dev_warn(hdev->dev,
- "unsupported HBM frequency %lluMHz, no rate-limiters\n",
- freq);
- return;
- }
-
- WREG32(mmDMA_IF_W_S_DOWN_RSP_MID_WGHT_0, 0x111);
- WREG32(mmDMA_IF_W_S_DOWN_RSP_MID_WGHT_1, 0x111);
- WREG32(mmDMA_IF_E_S_DOWN_RSP_MID_WGHT_0, 0x111);
- WREG32(mmDMA_IF_E_S_DOWN_RSP_MID_WGHT_1, 0x111);
- WREG32(mmDMA_IF_W_N_DOWN_RSP_MID_WGHT_0, 0x111);
- WREG32(mmDMA_IF_W_N_DOWN_RSP_MID_WGHT_1, 0x111);
- WREG32(mmDMA_IF_E_N_DOWN_RSP_MID_WGHT_0, 0x111);
- WREG32(mmDMA_IF_E_N_DOWN_RSP_MID_WGHT_1, 0x111);
-
- if (!hdev->rl_enable) {
- dev_info(hdev->dev, "Rate limiters disabled\n");
- return;
- }
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_HBM_SAT, sat);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_HBM_SAT, sat);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_HBM_RST, rst);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_HBM_RST, rst);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_HBM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_HBM_TIMEOUT, timeout);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_HBM_EN, 1);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_HBM_EN, 1);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_SRAM_SAT, sat);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_SRAM_SAT, sat);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_SRAM_RST, rst);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_SRAM_RST, rst);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_SRAM_TIMEOUT, timeout);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_SRAM_TIMEOUT, timeout);
-
- WREG32(mmDMA_IF_W_S_DOWN_CH0_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_W_S_DOWN_CH1_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_E_S_DOWN_CH0_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_E_S_DOWN_CH1_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_W_N_DOWN_CH0_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_W_N_DOWN_CH1_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_E_N_DOWN_CH0_RL_SRAM_EN, 1);
- WREG32(mmDMA_IF_E_N_DOWN_CH1_RL_SRAM_EN, 1);
-}
-
static void gaudi_init_golden_registers(struct hl_device *hdev)
{
u32 tpc_offset;
@@ -1823,8 +1772,6 @@ static void gaudi_init_golden_registers(struct hl_device *hdev)
gaudi_init_hbm_cred(hdev);
- gaudi_init_rate_limiter(hdev);
-
hdev->asic_funcs->disable_clock_gating(hdev);
for (tpc_id = 0, tpc_offset = 0;
@@ -1845,9 +1792,6 @@ static void gaudi_init_golden_registers(struct hl_device *hdev)
WREG32(mmMME1_CTRL_EUS_ROLLUP_CNT_ADD, 3);
WREG32(mmMME2_CTRL_EUS_ROLLUP_CNT_ADD, 3);
WREG32(mmMME3_CTRL_EUS_ROLLUP_CNT_ADD, 3);
-
- /* WA for H3-2081 */
- WREG32(mmPCIE_WRAP_MAX_OUTSTAND, 0x10ff);
}
static void gaudi_init_pci_dma_qman(struct hl_device *hdev, int dma_id,
@@ -2649,29 +2593,16 @@ static void gaudi_disable_timestamp(struct hl_device *hdev)
static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset)
{
- u32 wait_timeout_ms, cpu_timeout_ms;
+ u32 wait_timeout_ms;
dev_info(hdev->dev,
"Halting compute engines and disabling interrupts\n");
- if (hdev->pldm) {
+ if (hdev->pldm)
wait_timeout_ms = GAUDI_PLDM_RESET_WAIT_MSEC;
- cpu_timeout_ms = GAUDI_PLDM_RESET_WAIT_MSEC;
- } else {
+ else
wait_timeout_ms = GAUDI_RESET_WAIT_MSEC;
- cpu_timeout_ms = GAUDI_CPU_RESET_WAIT_MSEC;
- }
- if (hard_reset) {
- /*
- * I don't know what is the state of the CPU so make sure it is
- * stopped in any means necessary
- */
- WREG32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU, KMD_MSG_GOTO_WFE);
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
- GAUDI_EVENT_HALT_MACHINE);
- msleep(cpu_timeout_ms);
- }
gaudi_stop_mme_qmans(hdev);
gaudi_stop_tpc_qmans(hdev);
@@ -2696,10 +2627,7 @@ static void gaudi_halt_engines(struct hl_device *hdev, bool hard_reset)
gaudi_disable_timestamp(hdev);
- if (hard_reset)
- gaudi_disable_msi(hdev);
- else
- gaudi_sync_irqs(hdev);
+ gaudi_disable_msi(hdev);
}
static int gaudi_mmu_init(struct hl_device *hdev)
@@ -2733,8 +2661,7 @@ static int gaudi_mmu_init(struct hl_device *hdev)
WREG32(mmSTLB_CACHE_INV_BASE_39_8, MMU_CACHE_MNG_ADDR >> 8);
WREG32(mmSTLB_CACHE_INV_BASE_49_40, MMU_CACHE_MNG_ADDR >> 40);
- hdev->asic_funcs->mmu_invalidate_cache(hdev, true,
- VM_TYPE_USERPTR | VM_TYPE_PHYS_PACK);
+ hdev->asic_funcs->mmu_invalidate_cache(hdev, true, 0);
WREG32(mmMMU_UP_MMU_ENABLE, 1);
WREG32(mmMMU_UP_SPI_MASK, 0xF);
@@ -2984,16 +2911,6 @@ static int gaudi_hw_init(struct hl_device *hdev)
gaudi_init_hbm_dma_qmans(hdev);
- /*
- * Before pushing u-boot/linux to device, need to set the hbm bar to
- * base address of dram
- */
- if (gaudi_set_hbm_bar_base(hdev, DRAM_PHYS_BASE) == U64_MAX) {
- dev_err(hdev->dev,
- "failed to map HBM bar to DRAM base address\n");
- return -EIO;
- }
-
rc = gaudi_init_cpu(hdev);
if (rc) {
dev_err(hdev->dev, "failed to initialize CPU\n");
@@ -3052,48 +2969,56 @@ disable_queues:
static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
{
struct gaudi_device *gaudi = hdev->asic_specific;
- u32 status, reset_timeout_ms, boot_strap = 0;
+ u32 status, reset_timeout_ms, cpu_timeout_ms, boot_strap = 0;
+
+ if (!hard_reset) {
+ dev_err(hdev->dev, "GAUDI doesn't support soft-reset\n");
+ return;
+ }
if (hdev->pldm) {
- if (hard_reset)
- reset_timeout_ms = GAUDI_PLDM_HRESET_TIMEOUT_MSEC;
- else
- reset_timeout_ms = GAUDI_PLDM_SRESET_TIMEOUT_MSEC;
+ reset_timeout_ms = GAUDI_PLDM_HRESET_TIMEOUT_MSEC;
+ cpu_timeout_ms = GAUDI_PLDM_RESET_WAIT_MSEC;
} else {
reset_timeout_ms = GAUDI_RESET_TIMEOUT_MSEC;
+ cpu_timeout_ms = GAUDI_CPU_RESET_WAIT_MSEC;
}
- if (hard_reset) {
- /* Tell ASIC not to re-initialize PCIe */
- WREG32(mmPREBOOT_PCIE_EN, LKD_HARD_RESET_MAGIC);
+ /* Set device to handle FLR by H/W as we will put the device CPU to
+ * halt mode
+ */
+ WREG32(mmPCIE_AUX_FLR_CTRL, (PCIE_AUX_FLR_CTRL_HW_CTRL_MASK |
+ PCIE_AUX_FLR_CTRL_INT_MASK_MASK));
- boot_strap = RREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS);
- /* H/W bug WA:
- * rdata[31:0] = strap_read_val;
- * wdata[31:0] = rdata[30:21],1'b0,rdata[20:0]
- */
- boot_strap = (((boot_strap & 0x7FE00000) << 1) |
- (boot_strap & 0x001FFFFF));
- WREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS, boot_strap & ~0x2);
-
- /* Restart BTL/BLR upon hard-reset */
- WREG32(mmPSOC_GLOBAL_CONF_BOOT_SEQ_RE_START, 1);
-
- WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST,
- 1 << PSOC_GLOBAL_CONF_SW_ALL_RST_IND_SHIFT);
- dev_info(hdev->dev,
- "Issued HARD reset command, going to wait %dms\n",
- reset_timeout_ms);
- } else {
- /* Don't restart BTL/BLR upon soft-reset */
- WREG32(mmPSOC_GLOBAL_CONF_BOOT_SEQ_RE_START, 0);
+ /* I don't know what is the state of the CPU so make sure it is
+ * stopped in any means necessary
+ */
+ WREG32(mmPSOC_GLOBAL_CONF_KMD_MSG_TO_CPU, KMD_MSG_GOTO_WFE);
+ WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR, GAUDI_EVENT_HALT_MACHINE);
- WREG32(mmPSOC_GLOBAL_CONF_SOFT_RST,
- 1 << PSOC_GLOBAL_CONF_SOFT_RST_IND_SHIFT);
- dev_info(hdev->dev,
- "Issued SOFT reset command, going to wait %dms\n",
- reset_timeout_ms);
- }
+ msleep(cpu_timeout_ms);
+
+ /* Tell ASIC not to re-initialize PCIe */
+ WREG32(mmPREBOOT_PCIE_EN, LKD_HARD_RESET_MAGIC);
+
+ boot_strap = RREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS);
+
+ /* H/W bug WA:
+ * rdata[31:0] = strap_read_val;
+ * wdata[31:0] = rdata[30:21],1'b0,rdata[20:0]
+ */
+ boot_strap = (((boot_strap & 0x7FE00000) << 1) |
+ (boot_strap & 0x001FFFFF));
+ WREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS, boot_strap & ~0x2);
+
+ /* Restart BTL/BLR upon hard-reset */
+ WREG32(mmPSOC_GLOBAL_CONF_BOOT_SEQ_RE_START, 1);
+
+ WREG32(mmPSOC_GLOBAL_CONF_SW_ALL_RST,
+ 1 << PSOC_GLOBAL_CONF_SW_ALL_RST_IND_SHIFT);
+ dev_info(hdev->dev,
+ "Issued HARD reset command, going to wait %dms\n",
+ reset_timeout_ms);
/*
* After hard reset, we can't poll the BTM_FSM register because the PSOC
@@ -3107,18 +3032,6 @@ static void gaudi_hw_fini(struct hl_device *hdev, bool hard_reset)
"Timeout while waiting for device to reset 0x%x\n",
status);
- if (!hard_reset) {
- gaudi->hw_cap_initialized &= ~(HW_CAP_PCI_DMA | HW_CAP_MME |
- HW_CAP_TPC_MASK |
- HW_CAP_HBM_DMA);
-
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
- GAUDI_EVENT_SOFT_RESET);
- return;
- }
-
- /* We continue here only for hard-reset */
-
WREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS, boot_strap);
gaudi->hw_cap_initialized &= ~(HW_CAP_CPU | HW_CAP_CPU_Q |
@@ -3578,7 +3491,7 @@ static int gaudi_test_queues(struct hl_device *hdev)
{
int i, rc, ret_val = 0;
- for (i = 0 ; i < HL_MAX_QUEUES ; i++) {
+ for (i = 0 ; i < hdev->asic_prop.max_queues ; i++) {
if (hdev->asic_prop.hw_queues_props[i].type == QUEUE_TYPE_EXT) {
rc = gaudi_test_queue(hdev, i);
if (rc)
@@ -4159,9 +4072,8 @@ static int gaudi_parse_cb_mmu(struct hl_device *hdev,
parser->patched_cb_size = parser->user_cb_size +
sizeof(struct packet_msg_prot) * 2;
- rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr,
- parser->patched_cb_size,
- &patched_cb_handle, HL_KERNEL_ASID_ID);
+ rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, parser->patched_cb_size,
+ &patched_cb_handle, HL_KERNEL_ASID_ID, false);
if (rc) {
dev_err(hdev->dev,
@@ -4233,9 +4145,8 @@ static int gaudi_parse_cb_no_mmu(struct hl_device *hdev,
if (rc)
goto free_userptr;
- rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr,
- parser->patched_cb_size,
- &patched_cb_handle, HL_KERNEL_ASID_ID);
+ rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, parser->patched_cb_size,
+ &patched_cb_handle, HL_KERNEL_ASID_ID, false);
if (rc) {
dev_err(hdev->dev,
"Failed to allocate patched CB for DMA CS %d\n", rc);
@@ -4364,11 +4275,11 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
{
struct packet_lin_dma *lin_dma_pkt;
struct hl_cs_job *job;
- u32 cb_size, ctl;
+ u32 cb_size, ctl, err_cause;
struct hl_cb *cb;
int rc;
- cb = hl_cb_kernel_create(hdev, PAGE_SIZE);
+ cb = hl_cb_kernel_create(hdev, PAGE_SIZE, false);
if (!cb)
return -EFAULT;
@@ -4393,6 +4304,15 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
goto release_cb;
}
+ /* Verify DMA is OK */
+ err_cause = RREG32(mmDMA0_CORE_ERR_CAUSE);
+ if (err_cause && !hdev->init_done) {
+ dev_dbg(hdev->dev,
+ "Clearing DMA0 engine from errors (cause 0x%x)\n",
+ err_cause);
+ WREG32(mmDMA0_CORE_ERR_CAUSE, err_cause);
+ }
+
job->id = 0;
job->user_cb = cb;
job->user_cb->cs_cnt++;
@@ -4404,11 +4324,23 @@ static int gaudi_memset_device_memory(struct hl_device *hdev, u64 addr,
hl_debugfs_add_job(hdev, job);
rc = gaudi_send_job_on_qman0(hdev, job);
-
hl_debugfs_remove_job(hdev, job);
kfree(job);
cb->cs_cnt--;
+ /* Verify DMA is OK */
+ err_cause = RREG32(mmDMA0_CORE_ERR_CAUSE);
+ if (err_cause) {
+ dev_err(hdev->dev, "DMA Failed, cause 0x%x\n", err_cause);
+ rc = -EIO;
+ if (!hdev->init_done) {
+ dev_dbg(hdev->dev,
+ "Clearing DMA0 engine from errors (cause 0x%x)\n",
+ err_cause);
+ WREG32(mmDMA0_CORE_ERR_CAUSE, err_cause);
+ }
+ }
+
release_cb:
hl_cb_put(cb);
hl_cb_destroy(hdev, &hdev->kernel_cb_mgr, cb->id << PAGE_SHIFT);
@@ -5254,62 +5186,76 @@ static void gaudi_print_mmu_error_info(struct hl_device *hdev)
* | |0xF4C memory wrappers 127:96 |
* +-------------------+------------------------------------------------------+
*/
-static void gaudi_print_ecc_info_generic(struct hl_device *hdev,
- const char *block_name,
- u64 block_address, int num_memories,
- bool derr, bool disable_clock_gating)
+static int gaudi_extract_ecc_info(struct hl_device *hdev,
+ struct ecc_info_extract_params *params, u64 *ecc_address,
+ u64 *ecc_syndrom, u8 *memory_wrapper_idx)
{
struct gaudi_device *gaudi = hdev->asic_specific;
- int num_mem_regs = num_memories / 32 + ((num_memories % 32) ? 1 : 0);
+ u32 i, num_mem_regs, reg, err_bit;
+ u64 err_addr, err_word = 0;
+ int rc = 0;
+
+ num_mem_regs = params->num_memories / 32 +
+ ((params->num_memories % 32) ? 1 : 0);
- if (block_address >= CFG_BASE)
- block_address -= CFG_BASE;
+ if (params->block_address >= CFG_BASE)
+ params->block_address -= CFG_BASE;
- if (derr)
- block_address += GAUDI_ECC_DERR0_OFFSET;
+ if (params->derr)
+ err_addr = params->block_address + GAUDI_ECC_DERR0_OFFSET;
else
- block_address += GAUDI_ECC_SERR0_OFFSET;
+ err_addr = params->block_address + GAUDI_ECC_SERR0_OFFSET;
- if (disable_clock_gating) {
+ if (params->disable_clock_gating) {
mutex_lock(&gaudi->clk_gate_mutex);
hdev->asic_funcs->disable_clock_gating(hdev);
}
- switch (num_mem_regs) {
- case 1:
- dev_err(hdev->dev,
- "%s ECC indication: 0x%08x\n",
- block_name, RREG32(block_address));
- break;
- case 2:
- dev_err(hdev->dev,
- "%s ECC indication: 0x%08x 0x%08x\n",
- block_name,
- RREG32(block_address), RREG32(block_address + 4));
- break;
- case 3:
- dev_err(hdev->dev,
- "%s ECC indication: 0x%08x 0x%08x 0x%08x\n",
- block_name,
- RREG32(block_address), RREG32(block_address + 4),
- RREG32(block_address + 8));
- break;
- case 4:
- dev_err(hdev->dev,
- "%s ECC indication: 0x%08x 0x%08x 0x%08x 0x%08x\n",
- block_name,
- RREG32(block_address), RREG32(block_address + 4),
- RREG32(block_address + 8), RREG32(block_address + 0xc));
- break;
- default:
- break;
+ /* Set invalid wrapper index */
+ *memory_wrapper_idx = 0xFF;
+
+ /* Iterate through memory wrappers, a single bit must be set */
+ for (i = 0 ; i > num_mem_regs ; i++) {
+ err_addr += i * 4;
+ err_word = RREG32(err_addr);
+ if (err_word) {
+ err_bit = __ffs(err_word);
+ *memory_wrapper_idx = err_bit + (32 * i);
+ break;
+ }
+ }
+ if (*memory_wrapper_idx == 0xFF) {
+ dev_err(hdev->dev, "ECC error information cannot be found\n");
+ rc = -EINVAL;
+ goto enable_clk_gate;
}
- if (disable_clock_gating) {
+ WREG32(params->block_address + GAUDI_ECC_MEM_SEL_OFFSET,
+ *memory_wrapper_idx);
+
+ *ecc_address =
+ RREG32(params->block_address + GAUDI_ECC_ADDRESS_OFFSET);
+ *ecc_syndrom =
+ RREG32(params->block_address + GAUDI_ECC_SYNDROME_OFFSET);
+
+ /* Clear error indication */
+ reg = RREG32(params->block_address + GAUDI_ECC_MEM_INFO_CLR_OFFSET);
+ if (params->derr)
+ reg |= FIELD_PREP(GAUDI_ECC_MEM_INFO_CLR_DERR_MASK, 1);
+ else
+ reg |= FIELD_PREP(GAUDI_ECC_MEM_INFO_CLR_SERR_MASK, 1);
+
+ WREG32(params->block_address + GAUDI_ECC_MEM_INFO_CLR_OFFSET, reg);
+
+enable_clk_gate:
+ if (params->disable_clock_gating) {
hdev->asic_funcs->set_clock_gating(hdev);
+
mutex_unlock(&gaudi->clk_gate_mutex);
}
+
+ return rc;
}
static void gaudi_handle_qman_err_generic(struct hl_device *hdev,
@@ -5362,239 +5308,99 @@ static void gaudi_handle_qman_err_generic(struct hl_device *hdev,
}
}
-static void gaudi_print_ecc_info(struct hl_device *hdev, u16 event_type)
+static void gaudi_handle_ecc_event(struct hl_device *hdev, u16 event_type,
+ struct hl_eq_ecc_data *ecc_data)
{
- u64 block_address;
- u8 index;
- int num_memories;
- char desc[32];
- bool derr;
- bool disable_clock_gating;
+ struct ecc_info_extract_params params;
+ u64 ecc_address = 0, ecc_syndrom = 0;
+ u8 index, memory_wrapper_idx = 0;
+ bool extract_info_from_fw;
+ int rc;
switch (event_type) {
- case GAUDI_EVENT_PCIE_CORE_SERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_CORE");
- block_address = mmPCIE_CORE_BASE;
- num_memories = 51;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PCIE_CORE_DERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_CORE");
- block_address = mmPCIE_CORE_BASE;
- num_memories = 51;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PCIE_IF_SERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_WRAP");
- block_address = mmPCIE_WRAP_BASE;
- num_memories = 11;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PCIE_IF_DERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_WRAP");
- block_address = mmPCIE_WRAP_BASE;
- num_memories = 11;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PCIE_PHY_SERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_PHY");
- block_address = mmPCIE_PHY_BASE;
- num_memories = 4;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PCIE_PHY_DERR:
- snprintf(desc, ARRAY_SIZE(desc), "%s", "PCIE_PHY");
- block_address = mmPCIE_PHY_BASE;
- num_memories = 4;
- derr = true;
- disable_clock_gating = false;
+ case GAUDI_EVENT_PCIE_CORE_SERR ... GAUDI_EVENT_PCIE_PHY_DERR:
+ case GAUDI_EVENT_DMA0_SERR_ECC ... GAUDI_EVENT_MMU_DERR:
+ extract_info_from_fw = true;
break;
case GAUDI_EVENT_TPC0_SERR ... GAUDI_EVENT_TPC7_SERR:
index = event_type - GAUDI_EVENT_TPC0_SERR;
- block_address = mmTPC0_CFG_BASE + index * TPC_CFG_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "%s%d", "TPC", index);
- num_memories = 90;
- derr = false;
- disable_clock_gating = true;
+ params.block_address = mmTPC0_CFG_BASE + index * TPC_CFG_OFFSET;
+ params.num_memories = 90;
+ params.derr = false;
+ params.disable_clock_gating = true;
+ extract_info_from_fw = false;
break;
case GAUDI_EVENT_TPC0_DERR ... GAUDI_EVENT_TPC7_DERR:
index = event_type - GAUDI_EVENT_TPC0_DERR;
- block_address =
+ params.block_address =
mmTPC0_CFG_BASE + index * TPC_CFG_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "%s%d", "TPC", index);
- num_memories = 90;
- derr = true;
- disable_clock_gating = true;
+ params.num_memories = 90;
+ params.derr = true;
+ params.disable_clock_gating = true;
+ extract_info_from_fw = false;
break;
case GAUDI_EVENT_MME0_ACC_SERR:
case GAUDI_EVENT_MME1_ACC_SERR:
case GAUDI_EVENT_MME2_ACC_SERR:
case GAUDI_EVENT_MME3_ACC_SERR:
index = (event_type - GAUDI_EVENT_MME0_ACC_SERR) / 4;
- block_address = mmMME0_ACC_BASE + index * MME_ACC_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "MME%d_ACC", index);
- num_memories = 128;
- derr = false;
- disable_clock_gating = true;
+ params.block_address = mmMME0_ACC_BASE + index * MME_ACC_OFFSET;
+ params.num_memories = 128;
+ params.derr = false;
+ params.disable_clock_gating = true;
+ extract_info_from_fw = false;
break;
case GAUDI_EVENT_MME0_ACC_DERR:
case GAUDI_EVENT_MME1_ACC_DERR:
case GAUDI_EVENT_MME2_ACC_DERR:
case GAUDI_EVENT_MME3_ACC_DERR:
index = (event_type - GAUDI_EVENT_MME0_ACC_DERR) / 4;
- block_address = mmMME0_ACC_BASE + index * MME_ACC_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "MME%d_ACC", index);
- num_memories = 128;
- derr = true;
- disable_clock_gating = true;
+ params.block_address = mmMME0_ACC_BASE + index * MME_ACC_OFFSET;
+ params.num_memories = 128;
+ params.derr = true;
+ params.disable_clock_gating = true;
+ extract_info_from_fw = false;
break;
case GAUDI_EVENT_MME0_SBAB_SERR:
case GAUDI_EVENT_MME1_SBAB_SERR:
case GAUDI_EVENT_MME2_SBAB_SERR:
case GAUDI_EVENT_MME3_SBAB_SERR:
index = (event_type - GAUDI_EVENT_MME0_SBAB_SERR) / 4;
- block_address = mmMME0_SBAB_BASE + index * MME_ACC_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "MME%d_SBAB", index);
- num_memories = 33;
- derr = false;
- disable_clock_gating = true;
+ params.block_address =
+ mmMME0_SBAB_BASE + index * MME_ACC_OFFSET;
+ params.num_memories = 33;
+ params.derr = false;
+ params.disable_clock_gating = true;
+ extract_info_from_fw = false;
break;
case GAUDI_EVENT_MME0_SBAB_DERR:
case GAUDI_EVENT_MME1_SBAB_DERR:
case GAUDI_EVENT_MME2_SBAB_DERR:
case GAUDI_EVENT_MME3_SBAB_DERR:
index = (event_type - GAUDI_EVENT_MME0_SBAB_DERR) / 4;
- block_address = mmMME0_SBAB_BASE + index * MME_ACC_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "MME%d_SBAB", index);
- num_memories = 33;
- derr = true;
- disable_clock_gating = true;
- break;
- case GAUDI_EVENT_DMA0_SERR_ECC ... GAUDI_EVENT_DMA7_SERR_ECC:
- index = event_type - GAUDI_EVENT_DMA0_SERR_ECC;
- block_address = mmDMA0_CORE_BASE + index * DMA_CORE_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "DMA%d_CORE", index);
- num_memories = 16;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_DMA0_DERR_ECC ... GAUDI_EVENT_DMA7_DERR_ECC:
- index = event_type - GAUDI_EVENT_DMA0_DERR_ECC;
- block_address = mmDMA0_CORE_BASE + index * DMA_CORE_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "DMA%d_CORE", index);
- num_memories = 16;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_CPU_IF_ECC_SERR:
- block_address = mmCPU_IF_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 4;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_CPU_IF_ECC_DERR:
- block_address = mmCPU_IF_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 4;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PSOC_MEM_SERR:
- block_address = mmPSOC_GLOBAL_CONF_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 4;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PSOC_MEM_DERR:
- block_address = mmPSOC_GLOBAL_CONF_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 4;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PSOC_CORESIGHT_SERR:
- block_address = mmPSOC_CS_TRACE_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 2;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_PSOC_CORESIGHT_DERR:
- block_address = mmPSOC_CS_TRACE_BASE;
- snprintf(desc, ARRAY_SIZE(desc), "%s", "CPU");
- num_memories = 2;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_SRAM0_SERR ... GAUDI_EVENT_SRAM28_SERR:
- index = event_type - GAUDI_EVENT_SRAM0_SERR;
- block_address =
- mmSRAM_Y0_X0_BANK_BASE + index * SRAM_BANK_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "SRAM%d", index);
- num_memories = 2;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_SRAM0_DERR ... GAUDI_EVENT_SRAM28_DERR:
- index = event_type - GAUDI_EVENT_SRAM0_DERR;
- block_address =
- mmSRAM_Y0_X0_BANK_BASE + index * SRAM_BANK_OFFSET;
- snprintf(desc, ARRAY_SIZE(desc), "SRAM%d", index);
- num_memories = 2;
- derr = true;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_DMA_IF0_SERR ... GAUDI_EVENT_DMA_IF3_SERR:
- index = event_type - GAUDI_EVENT_DMA_IF0_SERR;
- block_address = mmDMA_IF_W_S_BASE +
- index * (mmDMA_IF_E_S_BASE - mmDMA_IF_W_S_BASE);
- snprintf(desc, ARRAY_SIZE(desc), "DMA_IF%d", index);
- num_memories = 60;
- derr = false;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_DMA_IF0_DERR ... GAUDI_EVENT_DMA_IF3_DERR:
- index = event_type - GAUDI_EVENT_DMA_IF0_DERR;
- block_address = mmDMA_IF_W_S_BASE +
- index * (mmDMA_IF_E_S_BASE - mmDMA_IF_W_S_BASE);
- snprintf(desc, ARRAY_SIZE(desc), "DMA_IF%d", index);
- derr = true;
- num_memories = 60;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_HBM_0_SERR ... GAUDI_EVENT_HBM_3_SERR:
- index = event_type - GAUDI_EVENT_HBM_0_SERR;
- /* HBM Registers are at different offsets */
- block_address = mmHBM0_BASE + 0x8000 +
- index * (mmHBM1_BASE - mmHBM0_BASE);
- snprintf(desc, ARRAY_SIZE(desc), "HBM%d", index);
- derr = false;
- num_memories = 64;
- disable_clock_gating = false;
- break;
- case GAUDI_EVENT_HBM_0_DERR ... GAUDI_EVENT_HBM_3_DERR:
- index = event_type - GAUDI_EVENT_HBM_0_SERR;
- /* HBM Registers are at different offsets */
- block_address = mmHBM0_BASE + 0x8000 +
- index * (mmHBM1_BASE - mmHBM0_BASE);
- snprintf(desc, ARRAY_SIZE(desc), "HBM%d", index);
- derr = true;
- num_memories = 64;
- disable_clock_gating = false;
- break;
+ params.block_address =
+ mmMME0_SBAB_BASE + index * MME_ACC_OFFSET;
+ params.num_memories = 33;
+ params.derr = true;
+ params.disable_clock_gating = true;
default:
return;
}
- gaudi_print_ecc_info_generic(hdev, desc, block_address, num_memories,
- derr, disable_clock_gating);
+ if (extract_info_from_fw) {
+ ecc_address = le64_to_cpu(ecc_data->ecc_address);
+ ecc_syndrom = le64_to_cpu(ecc_data->ecc_syndrom);
+ memory_wrapper_idx = ecc_data->memory_wrapper_idx;
+ } else {
+ rc = gaudi_extract_ecc_info(hdev, &params, &ecc_address,
+ &ecc_syndrom, &memory_wrapper_idx);
+ if (rc)
+ return;
+ }
+
+ dev_err(hdev->dev,
+ "ECC error detected. address: %#llx. Syndrom: %#llx. block id %u\n",
+ ecc_address, ecc_syndrom, memory_wrapper_idx);
}
static void gaudi_handle_qman_err(struct hl_device *hdev, u16 event_type)
@@ -5644,8 +5450,6 @@ static void gaudi_print_irq_info(struct hl_device *hdev, u16 event_type,
dev_err_ratelimited(hdev->dev, "Received H/W interrupt %d [\"%s\"]\n",
event_type, desc);
- gaudi_print_ecc_info(hdev, event_type);
-
if (razwi) {
gaudi_print_razwi_info(hdev);
gaudi_print_mmu_error_info(hdev);
@@ -5875,10 +5679,15 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
case GAUDI_EVENT_PSOC_CORESIGHT_DERR:
case GAUDI_EVENT_SRAM0_DERR ... GAUDI_EVENT_SRAM28_DERR:
case GAUDI_EVENT_DMA_IF0_DERR ... GAUDI_EVENT_DMA_IF3_DERR:
- fallthrough;
- case GAUDI_EVENT_GIC500:
case GAUDI_EVENT_HBM_0_DERR ... GAUDI_EVENT_HBM_3_DERR:
case GAUDI_EVENT_MMU_DERR:
+ gaudi_print_irq_info(hdev, event_type, true);
+ gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
+ if (hdev->hard_reset_on_fw_events)
+ hl_device_reset(hdev, true, false);
+ break;
+
+ case GAUDI_EVENT_GIC500:
case GAUDI_EVENT_AXI_ECC:
case GAUDI_EVENT_L2_RAM_ECC:
case GAUDI_EVENT_PLL0 ... GAUDI_EVENT_PLL17:
@@ -5974,6 +5783,11 @@ static void gaudi_handle_eqe(struct hl_device *hdev,
case GAUDI_EVENT_HBM_0_SERR ... GAUDI_EVENT_HBM_3_SERR:
fallthrough;
case GAUDI_EVENT_MMU_SERR:
+ gaudi_print_irq_info(hdev, event_type, true);
+ gaudi_handle_ecc_event(hdev, event_type, &eq_entry->ecc_data);
+ hl_fw_unmask_irq(hdev, event_type);
+ break;
+
case GAUDI_EVENT_PCIE_DEC:
case GAUDI_EVENT_MME0_WBC_RSP:
case GAUDI_EVENT_MME0_SBAB0_RSP:
@@ -6458,47 +6272,14 @@ static enum hl_device_hw_state gaudi_get_hw_state(struct hl_device *hdev)
return RREG32(mmHW_STATE);
}
-static u32 gaudi_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx)
-{
- return gaudi_cq_assignment[cq_idx];
-}
-
-static void gaudi_ext_queue_init(struct hl_device *hdev, u32 q_idx)
+static int gaudi_ctx_init(struct hl_ctx *ctx)
{
- struct gaudi_device *gaudi = hdev->asic_specific;
- struct hl_hw_queue *hw_queue = &hdev->kernel_queues[q_idx];
- struct hl_hw_sob *hw_sob;
- int sob, ext_idx = gaudi->ext_queue_idx++;
-
- /*
- * The external queues might not sit sequentially, hence use the
- * real external queue index for the SOB/MON base id.
- */
- hw_queue->base_sob_id = ext_idx * HL_RSVD_SOBS;
- hw_queue->base_mon_id = ext_idx * HL_RSVD_MONS;
- hw_queue->next_sob_val = 1;
- hw_queue->curr_sob_offset = 0;
-
- for (sob = 0 ; sob < HL_RSVD_SOBS ; sob++) {
- hw_sob = &hw_queue->hw_sob[sob];
- hw_sob->hdev = hdev;
- hw_sob->sob_id = hw_queue->base_sob_id + sob;
- hw_sob->q_idx = q_idx;
- kref_init(&hw_sob->kref);
- }
+ return 0;
}
-static void gaudi_ext_queue_reset(struct hl_device *hdev, u32 q_idx)
+static u32 gaudi_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx)
{
- struct hl_hw_queue *hw_queue = &hdev->kernel_queues[q_idx];
-
- /*
- * In case we got here due to a stuck CS, the refcnt might be bigger
- * than 1 and therefore we reset it.
- */
- kref_init(&hw_queue->hw_sob[hw_queue->curr_sob_offset].kref);
- hw_queue->curr_sob_offset = 0;
- hw_queue->next_sob_val = 1;
+ return gaudi_cq_assignment[cq_idx];
}
static u32 gaudi_get_signal_cb_size(struct hl_device *hdev)
@@ -6523,16 +6304,17 @@ static void gaudi_gen_signal_cb(struct hl_device *hdev, void *data, u16 sob_id)
pkt = (struct packet_msg_short *) (uintptr_t) cb->kernel_address;
memset(pkt, 0, sizeof(*pkt));
- value = 1 << GAUDI_PKT_SHORT_VAL_SOB_SYNC_VAL_SHIFT; /* inc by 1 */
- value |= 1 << GAUDI_PKT_SHORT_VAL_SOB_MOD_SHIFT; /* add mode */
+ /* Inc by 1, Mode ADD */
+ value = FIELD_PREP(GAUDI_PKT_SHORT_VAL_SOB_SYNC_VAL_MASK, 1);
+ value |= FIELD_PREP(GAUDI_PKT_SHORT_VAL_SOB_MOD_MASK, 1);
- ctl = (sob_id * 4) << GAUDI_PKT_SHORT_CTL_ADDR_SHIFT; /* SOB id */
- ctl |= 0 << GAUDI_PKT_SHORT_CTL_OP_SHIFT; /* write the value */
- ctl |= 3 << GAUDI_PKT_SHORT_CTL_BASE_SHIFT; /* W_S SOB base */
- ctl |= PACKET_MSG_SHORT << GAUDI_PKT_SHORT_CTL_OPCODE_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_EB_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_RB_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_MB_SHIFT;
+ ctl = FIELD_PREP(GAUDI_PKT_SHORT_CTL_ADDR_MASK, sob_id * 4);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_OP_MASK, 0); /* write the value */
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_BASE_MASK, 3); /* W_S SOB base */
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_OPCODE_MASK, PACKET_MSG_SHORT);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_EB_MASK, 1);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_RB_MASK, 1);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_MB_MASK, 1);
pkt->value = cpu_to_le32(value);
pkt->ctl = cpu_to_le32(ctl);
@@ -6545,12 +6327,12 @@ static u32 gaudi_add_mon_msg_short(struct packet_msg_short *pkt, u32 value,
memset(pkt, 0, pkt_size);
- ctl = addr << GAUDI_PKT_SHORT_CTL_ADDR_SHIFT;
- ctl |= 2 << GAUDI_PKT_SHORT_CTL_BASE_SHIFT; /* W_S MON base */
- ctl |= PACKET_MSG_SHORT << GAUDI_PKT_SHORT_CTL_OPCODE_SHIFT;
- ctl |= 0 << GAUDI_PKT_SHORT_CTL_EB_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_RB_SHIFT;
- ctl |= 0 << GAUDI_PKT_SHORT_CTL_MB_SHIFT; /* only last pkt needs MB */
+ ctl = FIELD_PREP(GAUDI_PKT_SHORT_CTL_ADDR_MASK, addr);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_BASE_MASK, 2); /* W_S MON base */
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_OPCODE_MASK, PACKET_MSG_SHORT);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_EB_MASK, 0);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_RB_MASK, 1);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_MB_MASK, 0); /* last pkt MB */
pkt->value = cpu_to_le32(value);
pkt->ctl = cpu_to_le32(ctl);
@@ -6566,18 +6348,19 @@ static u32 gaudi_add_arm_monitor_pkt(struct packet_msg_short *pkt, u16 sob_id,
memset(pkt, 0, pkt_size);
- value = (sob_id / 8) << GAUDI_PKT_SHORT_VAL_MON_SYNC_GID_SHIFT;
- value |= sob_val << GAUDI_PKT_SHORT_VAL_MON_SYNC_VAL_SHIFT;
- value |= 0 << GAUDI_PKT_SHORT_VAL_MON_MODE_SHIFT; /* GREATER_OR_EQUAL */
- value |= mask << GAUDI_PKT_SHORT_VAL_MON_MASK_SHIFT;
+ value = FIELD_PREP(GAUDI_PKT_SHORT_VAL_MON_SYNC_GID_MASK, sob_id / 8);
+ value |= FIELD_PREP(GAUDI_PKT_SHORT_VAL_MON_SYNC_VAL_MASK, sob_val);
+ value |= FIELD_PREP(GAUDI_PKT_SHORT_VAL_MON_MODE_MASK,
+ 0); /* GREATER OR EQUAL*/
+ value |= FIELD_PREP(GAUDI_PKT_SHORT_VAL_MON_MASK_MASK, mask);
- ctl = addr << GAUDI_PKT_SHORT_CTL_ADDR_SHIFT;
- ctl |= 0 << GAUDI_PKT_SHORT_CTL_OP_SHIFT; /* write the value */
- ctl |= 2 << GAUDI_PKT_SHORT_CTL_BASE_SHIFT; /* W_S MON base */
- ctl |= PACKET_MSG_SHORT << GAUDI_PKT_SHORT_CTL_OPCODE_SHIFT;
- ctl |= 0 << GAUDI_PKT_SHORT_CTL_EB_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_RB_SHIFT;
- ctl |= 1 << GAUDI_PKT_SHORT_CTL_MB_SHIFT;
+ ctl = FIELD_PREP(GAUDI_PKT_SHORT_CTL_ADDR_MASK, addr);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_OP_MASK, 0); /* write the value */
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_BASE_MASK, 2); /* W_S MON base */
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_OPCODE_MASK, PACKET_MSG_SHORT);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_EB_MASK, 0);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_RB_MASK, 1);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_MB_MASK, 1);
pkt->value = cpu_to_le32(value);
pkt->ctl = cpu_to_le32(ctl);
@@ -6591,15 +6374,14 @@ static u32 gaudi_add_fence_pkt(struct packet_fence *pkt)
memset(pkt, 0, pkt_size);
- cfg = 1 << GAUDI_PKT_FENCE_CFG_DEC_VAL_SHIFT;
- cfg |= 1 << GAUDI_PKT_FENCE_CFG_TARGET_VAL_SHIFT;
- cfg |= 2 << GAUDI_PKT_FENCE_CFG_ID_SHIFT;
+ cfg = FIELD_PREP(GAUDI_PKT_FENCE_CFG_DEC_VAL_MASK, 1);
+ cfg |= FIELD_PREP(GAUDI_PKT_FENCE_CFG_TARGET_VAL_MASK, 1);
+ cfg |= FIELD_PREP(GAUDI_PKT_FENCE_CFG_ID_MASK, 2);
- ctl = 0 << GAUDI_PKT_FENCE_CTL_PRED_SHIFT;
- ctl |= PACKET_FENCE << GAUDI_PKT_FENCE_CTL_OPCODE_SHIFT;
- ctl |= 0 << GAUDI_PKT_FENCE_CTL_EB_SHIFT;
- ctl |= 1 << GAUDI_PKT_FENCE_CTL_RB_SHIFT;
- ctl |= 1 << GAUDI_PKT_FENCE_CTL_MB_SHIFT;
+ ctl = FIELD_PREP(GAUDI_PKT_FENCE_CTL_OPCODE_MASK, PACKET_FENCE);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_EB_MASK, 0);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_RB_MASK, 1);
+ ctl |= FIELD_PREP(GAUDI_PKT_SHORT_CTL_MB_MASK, 1);
pkt->cfg = cpu_to_le32(cfg);
pkt->ctl = cpu_to_le32(ctl);
@@ -6798,13 +6580,12 @@ static const struct hl_asic_funcs gaudi_funcs = {
.rreg = hl_rreg,
.wreg = hl_wreg,
.halt_coresight = gaudi_halt_coresight,
+ .ctx_init = gaudi_ctx_init,
.get_clk_rate = gaudi_get_clk_rate,
.get_queue_id_for_cq = gaudi_get_queue_id_for_cq,
.read_device_fw_version = gaudi_read_device_fw_version,
.load_firmware_to_device = gaudi_load_firmware_to_device,
.load_boot_fit_to_device = gaudi_load_boot_fit_to_device,
- .ext_queue_init = gaudi_ext_queue_init,
- .ext_queue_reset = gaudi_ext_queue_reset,
.get_signal_cb_size = gaudi_get_signal_cb_size,
.get_wait_cb_size = gaudi_get_wait_cb_size,
.gen_signal_cb = gaudi_gen_signal_cb,
@@ -6817,7 +6598,7 @@ static const struct hl_asic_funcs gaudi_funcs = {
/**
* gaudi_set_asic_funcs - set GAUDI function pointers
*
- * @*hdev: pointer to hl_device structure
+ * @hdev: pointer to hl_device structure
*
*/
void gaudi_set_asic_funcs(struct hl_device *hdev)
diff --git a/drivers/misc/habanalabs/gaudi/gaudiP.h b/drivers/misc/habanalabs/gaudi/gaudiP.h
index 41a8d9bff6bf..5dc99f6f0296 100644
--- a/drivers/misc/habanalabs/gaudi/gaudiP.h
+++ b/drivers/misc/habanalabs/gaudi/gaudiP.h
@@ -9,11 +9,11 @@
#define GAUDIP_H_
#include <uapi/misc/habanalabs.h>
-#include "habanalabs.h"
-#include "include/hl_boot_if.h"
-#include "include/gaudi/gaudi_packets.h"
-#include "include/gaudi/gaudi.h"
-#include "include/gaudi/gaudi_async_events.h"
+#include "../common/habanalabs.h"
+#include "../include/common/hl_boot_if.h"
+#include "../include/gaudi/gaudi_packets.h"
+#include "../include/gaudi/gaudi.h"
+#include "../include/gaudi/gaudi_async_events.h"
#define NUMBER_OF_EXT_HW_QUEUES 12
#define NUMBER_OF_CMPLT_QUEUES NUMBER_OF_EXT_HW_QUEUES
@@ -57,6 +57,12 @@
#define GAUDI_DEFAULT_CARD_NAME "HL2000"
+#define GAUDI_MAX_PENDING_CS 1024
+
+#if !IS_MAX_PENDING_CS_VALID(GAUDI_MAX_PENDING_CS)
+#error "GAUDI_MAX_PENDING_CS must be power of 2 and greater than 1"
+#endif
+
#define PCI_DMA_NUMBER_OF_CHNLS 3
#define HBM_DMA_NUMBER_OF_CHNLS 5
#define DMA_NUMBER_OF_CHNLS (PCI_DMA_NUMBER_OF_CHNLS + \
@@ -117,14 +123,14 @@
/* Internal QMANs PQ sizes */
-#define MME_QMAN_LENGTH 64
+#define MME_QMAN_LENGTH 1024
#define MME_QMAN_SIZE_IN_BYTES (MME_QMAN_LENGTH * QMAN_PQ_ENTRY_SIZE)
-#define HBM_DMA_QMAN_LENGTH 64
+#define HBM_DMA_QMAN_LENGTH 1024
#define HBM_DMA_QMAN_SIZE_IN_BYTES \
(HBM_DMA_QMAN_LENGTH * QMAN_PQ_ENTRY_SIZE)
-#define TPC_QMAN_LENGTH 64
+#define TPC_QMAN_LENGTH 1024
#define TPC_QMAN_SIZE_IN_BYTES (TPC_QMAN_LENGTH * QMAN_PQ_ENTRY_SIZE)
#define SRAM_USER_BASE_OFFSET GAUDI_DRIVER_SRAM_RESERVED_SIZE_FROM_START
@@ -228,7 +234,6 @@ struct gaudi_internal_qman_info {
* engine.
* @multi_msi_mode: whether we are working in multi MSI single MSI mode.
* Multi MSI is possible only with IOMMU enabled.
- * @ext_queue_idx: helper index for external queues initialization.
* @mmu_cache_inv_pi: PI for MMU cache invalidation flow. The H/W expects an
* 8-bit value so use u8.
*/
@@ -249,7 +254,6 @@ struct gaudi_device {
u32 events_stat_aggregate[GAUDI_EVENT_SIZE];
u32 hw_cap_initialized;
u8 multi_msi_mode;
- u8 ext_queue_idx;
u8 mmu_cache_inv_pi;
};
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
index bf0e062d7b87..5673ee49819e 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_coresight.c
@@ -6,9 +6,9 @@
*/
#include "gaudiP.h"
-#include "include/gaudi/gaudi_coresight.h"
-#include "include/gaudi/asic_reg/gaudi_regs.h"
-#include "include/gaudi/gaudi_masks.h"
+#include "../include/gaudi/gaudi_coresight.h"
+#include "../include/gaudi/asic_reg/gaudi_regs.h"
+#include "../include/gaudi/gaudi_masks.h"
#include <uapi/misc/habanalabs.h>
#include <linux/coresight.h>
@@ -392,6 +392,7 @@ static int gaudi_config_stm(struct hl_device *hdev,
{
struct hl_debug_params_stm *input;
u64 base_reg;
+ u32 frequency;
int rc;
if (params->reg_idx >= ARRAY_SIZE(debug_stm_regs)) {
@@ -420,7 +421,10 @@ static int gaudi_config_stm(struct hl_device *hdev,
WREG32(base_reg + 0xE00, lower_32_bits(input->sp_mask));
WREG32(base_reg + 0xEF4, input->id);
WREG32(base_reg + 0xDF4, 0x80);
- WREG32(base_reg + 0xE8C, input->frequency);
+ frequency = hdev->asic_prop.psoc_timestamp_frequency;
+ if (frequency == 0)
+ frequency = input->frequency;
+ WREG32(base_reg + 0xE8C, frequency);
WREG32(base_reg + 0xE90, 0x7FF);
/* SW-2176 - SW WA for HW bug */
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c b/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
index 6dd2c2a1cd70..1076b4932ce2 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_hwmgr.c
@@ -6,7 +6,7 @@
*/
#include "gaudiP.h"
-#include "include/gaudi/gaudi_fw_if.h"
+#include "../include/gaudi/gaudi_fw_if.h"
void gaudi_set_pll_profile(struct hl_device *hdev, enum hl_pll_frequency freq)
{
diff --git a/drivers/misc/habanalabs/gaudi/gaudi_security.c b/drivers/misc/habanalabs/gaudi/gaudi_security.c
index 6a351e31fa6a..8d5d6ddee6ed 100644
--- a/drivers/misc/habanalabs/gaudi/gaudi_security.c
+++ b/drivers/misc/habanalabs/gaudi/gaudi_security.c
@@ -6,7 +6,7 @@
*/
#include "gaudiP.h"
-#include "include/gaudi/asic_reg/gaudi_regs.h"
+#include "../include/gaudi/asic_reg/gaudi_regs.h"
#define GAUDI_NUMBER_OF_RR_REGS 24
#define GAUDI_NUMBER_OF_LBW_RANGES 12
@@ -447,8 +447,7 @@ static u64 gaudi_rr_hbw_mask_high_ar_regs[GAUDI_NUMBER_OF_RR_REGS] = {
* gaudi_set_block_as_protected - set the given block as protected
*
* @hdev: pointer to hl_device structure
- * @block: block base address
- *
+ * @base: block base address
*/
static void gaudi_pb_set_block(struct hl_device *hdev, u64 base)
{
diff --git a/drivers/misc/habanalabs/goya/Makefile b/drivers/misc/habanalabs/goya/Makefile
index bd769083628e..b3f3b7b96683 100644
--- a/drivers/misc/habanalabs/goya/Makefile
+++ b/drivers/misc/habanalabs/goya/Makefile
@@ -1,5 +1,3 @@
# SPDX-License-Identifier: GPL-2.0-only
-subdir-ccflags-y += -I$(src)
-
HL_GOYA_FILES := goya/goya.o goya/goya_security.o goya/goya_hwmgr.o \
goya/goya_coresight.o
diff --git a/drivers/misc/habanalabs/goya/goya.c b/drivers/misc/habanalabs/goya/goya.c
index 88460b2138d8..85030759b2af 100644
--- a/drivers/misc/habanalabs/goya/goya.c
+++ b/drivers/misc/habanalabs/goya/goya.c
@@ -6,10 +6,10 @@
*/
#include "goyaP.h"
-#include "include/hw_ip/mmu/mmu_general.h"
-#include "include/hw_ip/mmu/mmu_v1_0.h"
-#include "include/goya/asic_reg/goya_masks.h"
-#include "include/goya/goya_reg_map.h"
+#include "../include/hw_ip/mmu/mmu_general.h"
+#include "../include/hw_ip/mmu/mmu_v1_0.h"
+#include "../include/goya/asic_reg/goya_masks.h"
+#include "../include/goya/goya_reg_map.h"
#include <linux/pci.h>
#include <linux/genalloc.h>
@@ -338,11 +338,19 @@ static int goya_mmu_set_dram_default_page(struct hl_device *hdev);
static int goya_mmu_add_mappings_for_device_cpu(struct hl_device *hdev);
static void goya_mmu_prepare(struct hl_device *hdev, u32 asid);
-void goya_get_fixed_properties(struct hl_device *hdev)
+int goya_get_fixed_properties(struct hl_device *hdev)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
int i;
+ prop->max_queues = GOYA_QUEUE_ID_SIZE;
+ prop->hw_queues_props = kcalloc(prop->max_queues,
+ sizeof(struct hw_queue_properties),
+ GFP_KERNEL);
+
+ if (!prop->hw_queues_props)
+ return -ENOMEM;
+
for (i = 0 ; i < NUMBER_OF_EXT_HW_QUEUES ; i++) {
prop->hw_queues_props[i].type = QUEUE_TYPE_EXT;
prop->hw_queues_props[i].driver_only = 0;
@@ -362,9 +370,6 @@ void goya_get_fixed_properties(struct hl_device *hdev)
prop->hw_queues_props[i].requires_kernel_cb = 0;
}
- for (; i < HL_MAX_QUEUES; i++)
- prop->hw_queues_props[i].type = QUEUE_TYPE_NA;
-
prop->completion_queues_count = NUMBER_OF_CMPLT_QUEUES;
prop->dram_base_address = DRAM_PHYS_BASE;
@@ -427,6 +432,10 @@ void goya_get_fixed_properties(struct hl_device *hdev)
strncpy(prop->armcp_info.card_name, GOYA_DEFAULT_CARD_NAME,
CARD_NAME_MAX_LEN);
+
+ prop->max_pending_cs = GOYA_MAX_PENDING_CS;
+
+ return 0;
}
/*
@@ -457,6 +466,7 @@ static int goya_pci_bars_map(struct hl_device *hdev)
static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr)
{
struct goya_device *goya = hdev->asic_specific;
+ struct hl_inbound_pci_region pci_region;
u64 old_addr = addr;
int rc;
@@ -464,7 +474,10 @@ static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr)
return old_addr;
/* Inbound Region 1 - Bar 4 - Point to DDR */
- rc = hl_pci_set_dram_bar_base(hdev, 1, 4, addr);
+ pci_region.mode = PCI_BAR_MATCH_MODE;
+ pci_region.bar = DDR_BAR_ID;
+ pci_region.addr = addr;
+ rc = hl_pci_set_inbound_region(hdev, 1, &pci_region);
if (rc)
return U64_MAX;
@@ -486,8 +499,35 @@ static u64 goya_set_ddr_bar_base(struct hl_device *hdev, u64 addr)
*/
static int goya_init_iatu(struct hl_device *hdev)
{
- return hl_pci_init_iatu(hdev, SRAM_BASE_ADDR, DRAM_PHYS_BASE,
- HOST_PHYS_BASE, HOST_PHYS_SIZE);
+ struct hl_inbound_pci_region inbound_region;
+ struct hl_outbound_pci_region outbound_region;
+ int rc;
+
+ /* Inbound Region 0 - Bar 0 - Point to SRAM and CFG */
+ inbound_region.mode = PCI_BAR_MATCH_MODE;
+ inbound_region.bar = SRAM_CFG_BAR_ID;
+ inbound_region.addr = SRAM_BASE_ADDR;
+ rc = hl_pci_set_inbound_region(hdev, 0, &inbound_region);
+ if (rc)
+ goto done;
+
+ /* Inbound Region 1 - Bar 4 - Point to DDR */
+ inbound_region.mode = PCI_BAR_MATCH_MODE;
+ inbound_region.bar = DDR_BAR_ID;
+ inbound_region.addr = DRAM_PHYS_BASE;
+ rc = hl_pci_set_inbound_region(hdev, 1, &inbound_region);
+ if (rc)
+ goto done;
+
+ hdev->asic_funcs->set_dma_mask_from_fw(hdev);
+
+ /* Outbound Region 0 - Point to Host */
+ outbound_region.addr = HOST_PHYS_BASE;
+ outbound_region.size = HOST_PHYS_SIZE;
+ rc = hl_pci_set_outbound_region(hdev, &outbound_region);
+
+done:
+ return rc;
}
/*
@@ -508,7 +548,11 @@ static int goya_early_init(struct hl_device *hdev)
u32 val;
int rc;
- goya_get_fixed_properties(hdev);
+ rc = goya_get_fixed_properties(hdev);
+ if (rc) {
+ dev_err(hdev->dev, "Failed to get fixed properties\n");
+ return rc;
+ }
/* Check BAR sizes */
if (pci_resource_len(pdev, SRAM_CFG_BAR_ID) != CFG_BAR_SIZE) {
@@ -518,7 +562,8 @@ static int goya_early_init(struct hl_device *hdev)
(unsigned long long) pci_resource_len(pdev,
SRAM_CFG_BAR_ID),
CFG_BAR_SIZE);
- return -ENODEV;
+ rc = -ENODEV;
+ goto free_queue_props;
}
if (pci_resource_len(pdev, MSIX_BAR_ID) != MSIX_BAR_SIZE) {
@@ -528,14 +573,15 @@ static int goya_early_init(struct hl_device *hdev)
(unsigned long long) pci_resource_len(pdev,
MSIX_BAR_ID),
MSIX_BAR_SIZE);
- return -ENODEV;
+ rc = -ENODEV;
+ goto free_queue_props;
}
prop->dram_pci_bar_size = pci_resource_len(pdev, DDR_BAR_ID);
rc = hl_pci_init(hdev);
if (rc)
- return rc;
+ goto free_queue_props;
if (!hdev->pldm) {
val = RREG32(mmPSOC_GLOBAL_CONF_BOOT_STRAP_PINS);
@@ -545,6 +591,10 @@ static int goya_early_init(struct hl_device *hdev)
}
return 0;
+
+free_queue_props:
+ kfree(hdev->asic_prop.hw_queues_props);
+ return rc;
}
/*
@@ -557,6 +607,7 @@ static int goya_early_init(struct hl_device *hdev)
*/
static int goya_early_fini(struct hl_device *hdev)
{
+ kfree(hdev->asic_prop.hw_queues_props);
hl_pci_fini(hdev);
return 0;
@@ -593,11 +644,36 @@ static void goya_qman0_set_security(struct hl_device *hdev, bool secure)
static void goya_fetch_psoc_frequency(struct hl_device *hdev)
{
struct asic_fixed_properties *prop = &hdev->asic_prop;
+ u32 trace_freq = 0;
+ u32 pll_clk = 0;
+ u32 div_fctr = RREG32(mmPSOC_PCI_PLL_DIV_FACTOR_1);
+ u32 div_sel = RREG32(mmPSOC_PCI_PLL_DIV_SEL_1);
+ u32 nr = RREG32(mmPSOC_PCI_PLL_NR);
+ u32 nf = RREG32(mmPSOC_PCI_PLL_NF);
+ u32 od = RREG32(mmPSOC_PCI_PLL_OD);
+
+ if (div_sel == DIV_SEL_REF_CLK || div_sel == DIV_SEL_DIVIDED_REF) {
+ if (div_sel == DIV_SEL_REF_CLK)
+ trace_freq = PLL_REF_CLK;
+ else
+ trace_freq = PLL_REF_CLK / (div_fctr + 1);
+ } else if (div_sel == DIV_SEL_PLL_CLK ||
+ div_sel == DIV_SEL_DIVIDED_PLL) {
+ pll_clk = PLL_REF_CLK * (nf + 1) / ((nr + 1) * (od + 1));
+ if (div_sel == DIV_SEL_PLL_CLK)
+ trace_freq = pll_clk;
+ else
+ trace_freq = pll_clk / (div_fctr + 1);
+ } else {
+ dev_warn(hdev->dev,
+ "Received invalid div select value: %d", div_sel);
+ }
- prop->psoc_pci_pll_nr = RREG32(mmPSOC_PCI_PLL_NR);
- prop->psoc_pci_pll_nf = RREG32(mmPSOC_PCI_PLL_NF);
- prop->psoc_pci_pll_od = RREG32(mmPSOC_PCI_PLL_OD);
- prop->psoc_pci_pll_div_factor = RREG32(mmPSOC_PCI_PLL_DIV_FACTOR_1);
+ prop->psoc_timestamp_frequency = trace_freq;
+ prop->psoc_pci_pll_nr = nr;
+ prop->psoc_pci_pll_nf = nf;
+ prop->psoc_pci_pll_od = od;
+ prop->psoc_pci_pll_div_factor = div_fctr;
}
int goya_late_init(struct hl_device *hdev)
@@ -2165,29 +2241,15 @@ static void goya_disable_timestamp(struct hl_device *hdev)
static void goya_halt_engines(struct hl_device *hdev, bool hard_reset)
{
- u32 wait_timeout_ms, cpu_timeout_ms;
+ u32 wait_timeout_ms;
dev_info(hdev->dev,
"Halting compute engines and disabling interrupts\n");
- if (hdev->pldm) {
+ if (hdev->pldm)
wait_timeout_ms = GOYA_PLDM_RESET_WAIT_MSEC;
- cpu_timeout_ms = GOYA_PLDM_RESET_WAIT_MSEC;
- } else {
+ else
wait_timeout_ms = GOYA_RESET_WAIT_MSEC;
- cpu_timeout_ms = GOYA_CPU_RESET_WAIT_MSEC;
- }
-
- if (hard_reset) {
- /*
- * I don't know what is the state of the CPU so make sure it is
- * stopped in any means necessary
- */
- WREG32(mmPSOC_GLOBAL_CONF_UBOOT_MAGIC, KMD_MSG_GOTO_WFE);
- WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
- GOYA_ASYNC_EVENT_ID_HALT_MACHINE);
- msleep(cpu_timeout_ms);
- }
goya_stop_external_queues(hdev);
goya_stop_internal_queues(hdev);
@@ -2492,14 +2554,26 @@ disable_queues:
static void goya_hw_fini(struct hl_device *hdev, bool hard_reset)
{
struct goya_device *goya = hdev->asic_specific;
- u32 reset_timeout_ms, status;
+ u32 reset_timeout_ms, cpu_timeout_ms, status;
- if (hdev->pldm)
+ if (hdev->pldm) {
reset_timeout_ms = GOYA_PLDM_RESET_TIMEOUT_MSEC;
- else
+ cpu_timeout_ms = GOYA_PLDM_RESET_WAIT_MSEC;
+ } else {
reset_timeout_ms = GOYA_RESET_TIMEOUT_MSEC;
+ cpu_timeout_ms = GOYA_CPU_RESET_WAIT_MSEC;
+ }
if (hard_reset) {
+ /* I don't know what is the state of the CPU so make sure it is
+ * stopped in any means necessary
+ */
+ WREG32(mmPSOC_GLOBAL_CONF_UBOOT_MAGIC, KMD_MSG_GOTO_WFE);
+ WREG32(mmGIC_DISTRIBUTOR__5_GICD_SETSPI_NSR,
+ GOYA_ASYNC_EVENT_ID_HALT_MACHINE);
+
+ msleep(cpu_timeout_ms);
+
goya_set_ddr_bar_base(hdev, DRAM_PHYS_BASE);
goya_disable_clk_rlx(hdev);
goya_set_pll_refclk(hdev);
@@ -3701,9 +3775,8 @@ static int goya_parse_cb_mmu(struct hl_device *hdev,
parser->patched_cb_size = parser->user_cb_size +
sizeof(struct packet_msg_prot) * 2;
- rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr,
- parser->patched_cb_size,
- &patched_cb_handle, HL_KERNEL_ASID_ID);
+ rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, parser->patched_cb_size,
+ &patched_cb_handle, HL_KERNEL_ASID_ID, false);
if (rc) {
dev_err(hdev->dev,
@@ -3775,9 +3848,8 @@ static int goya_parse_cb_no_mmu(struct hl_device *hdev,
if (rc)
goto free_userptr;
- rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr,
- parser->patched_cb_size,
- &patched_cb_handle, HL_KERNEL_ASID_ID);
+ rc = hl_cb_create(hdev, &hdev->kernel_cb_mgr, parser->patched_cb_size,
+ &patched_cb_handle, HL_KERNEL_ASID_ID, false);
if (rc) {
dev_err(hdev->dev,
"Failed to allocate patched CB for DMA CS %d\n", rc);
@@ -3946,8 +4018,7 @@ static int goya_debugfs_read32(struct hl_device *hdev, u64 addr, u32 *val)
*val = readl(hdev->pcie_bar[SRAM_CFG_BAR_ID] +
(addr - SRAM_BASE_ADDR));
- } else if ((addr >= DRAM_PHYS_BASE) &&
- (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size)) {
+ } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
u64 bar_base_addr = DRAM_PHYS_BASE +
(addr & ~(prop->dram_pci_bar_size - 0x1ull));
@@ -4003,8 +4074,7 @@ static int goya_debugfs_write32(struct hl_device *hdev, u64 addr, u32 val)
writel(val, hdev->pcie_bar[SRAM_CFG_BAR_ID] +
(addr - SRAM_BASE_ADDR));
- } else if ((addr >= DRAM_PHYS_BASE) &&
- (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size)) {
+ } else if (addr < DRAM_PHYS_BASE + hdev->asic_prop.dram_size) {
u64 bar_base_addr = DRAM_PHYS_BASE +
(addr & ~(prop->dram_pci_bar_size - 0x1ull));
@@ -4048,9 +4118,8 @@ static int goya_debugfs_read64(struct hl_device *hdev, u64 addr, u64 *val)
*val = readq(hdev->pcie_bar[SRAM_CFG_BAR_ID] +
(addr - SRAM_BASE_ADDR));
- } else if ((addr >= DRAM_PHYS_BASE) &&
- (addr <=
- DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64))) {
+ } else if (addr <=
+ DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
u64 bar_base_addr = DRAM_PHYS_BASE +
(addr & ~(prop->dram_pci_bar_size - 0x1ull));
@@ -4092,9 +4161,8 @@ static int goya_debugfs_write64(struct hl_device *hdev, u64 addr, u64 val)
writeq(val, hdev->pcie_bar[SRAM_CFG_BAR_ID] +
(addr - SRAM_BASE_ADDR));
- } else if ((addr >= DRAM_PHYS_BASE) &&
- (addr <=
- DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64))) {
+ } else if (addr <=
+ DRAM_PHYS_BASE + hdev->asic_prop.dram_size - sizeof(u64)) {
u64 bar_base_addr = DRAM_PHYS_BASE +
(addr & ~(prop->dram_pci_bar_size - 0x1ull));
@@ -4627,7 +4695,7 @@ static int goya_memset_device_memory(struct hl_device *hdev, u64 addr, u64 size,
lin_dma_pkts_cnt = DIV_ROUND_UP_ULL(size, SZ_2G);
cb_size = lin_dma_pkts_cnt * sizeof(struct packet_lin_dma) +
sizeof(struct packet_msg_prot);
- cb = hl_cb_kernel_create(hdev, cb_size);
+ cb = hl_cb_kernel_create(hdev, cb_size, false);
if (!cb)
return -ENOMEM;
@@ -5157,19 +5225,14 @@ static enum hl_device_hw_state goya_get_hw_state(struct hl_device *hdev)
return RREG32(mmHW_STATE);
}
-u32 goya_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx)
+static int goya_ctx_init(struct hl_ctx *ctx)
{
- return cq_idx;
-}
-
-static void goya_ext_queue_init(struct hl_device *hdev, u32 q_idx)
-{
-
+ return 0;
}
-static void goya_ext_queue_reset(struct hl_device *hdev, u32 q_idx)
+u32 goya_get_queue_id_for_cq(struct hl_device *hdev, u32 cq_idx)
{
-
+ return cq_idx;
}
static u32 goya_get_signal_cb_size(struct hl_device *hdev)
@@ -5280,13 +5343,12 @@ static const struct hl_asic_funcs goya_funcs = {
.rreg = hl_rreg,
.wreg = hl_wreg,
.halt_coresight = goya_halt_coresight,
+ .ctx_init = goya_ctx_init,
.get_clk_rate = goya_get_clk_rate,
.get_queue_id_for_cq = goya_get_queue_id_for_cq,
.read_device_fw_version = goya_read_device_fw_version,
.load_firmware_to_device = goya_load_firmware_to_device,
.load_boot_fit_to_device = goya_load_boot_fit_to_device,
- .ext_queue_init = goya_ext_queue_init,
- .ext_queue_reset = goya_ext_queue_reset,
.get_signal_cb_size = goya_get_signal_cb_size,
.get_wait_cb_size = goya_get_wait_cb_size,
.gen_signal_cb = goya_gen_signal_cb,
diff --git a/drivers/misc/habanalabs/goya/goyaP.h b/drivers/misc/habanalabs/goya/goyaP.h
index d36f8d90c9c9..bb7474ee9784 100644
--- a/drivers/misc/habanalabs/goya/goyaP.h
+++ b/drivers/misc/habanalabs/goya/goyaP.h
@@ -9,12 +9,12 @@
#define GOYAP_H_
#include <uapi/misc/habanalabs.h>
-#include "habanalabs.h"
-#include "include/hl_boot_if.h"
-#include "include/goya/goya_packets.h"
-#include "include/goya/goya.h"
-#include "include/goya/goya_async_events.h"
-#include "include/goya/goya_fw_if.h"
+#include "../common/habanalabs.h"
+#include "../include/common/hl_boot_if.h"
+#include "../include/goya/goya_packets.h"
+#include "../include/goya/goya.h"
+#include "../include/goya/goya_async_events.h"
+#include "../include/goya/goya_fw_if.h"
#define NUMBER_OF_CMPLT_QUEUES 5
#define NUMBER_OF_EXT_HW_QUEUES 5
@@ -31,10 +31,6 @@
*/
#define NUMBER_OF_INTERRUPTS (NUMBER_OF_CMPLT_QUEUES + 1)
-#if (NUMBER_OF_HW_QUEUES >= HL_MAX_QUEUES)
-#error "Number of H/W queues must be smaller than HL_MAX_QUEUES"
-#endif
-
#if (NUMBER_OF_INTERRUPTS > GOYA_MSIX_ENTRIES)
#error "Number of MSIX interrupts must be smaller or equal to GOYA_MSIX_ENTRIES"
#endif
@@ -57,6 +53,12 @@
#define GOYA_DEFAULT_CARD_NAME "HL1000"
+#define GOYA_MAX_PENDING_CS 64
+
+#if !IS_MAX_PENDING_CS_VALID(GOYA_MAX_PENDING_CS)
+#error "GOYA_MAX_PENDING_CS must be power of 2 and greater than 1"
+#endif
+
/* DRAM Memory Map */
#define CPU_FW_IMAGE_SIZE 0x10000000 /* 256MB */
@@ -164,7 +166,7 @@ struct goya_device {
u8 device_cpu_mmu_mappings_done;
};
-void goya_get_fixed_properties(struct hl_device *hdev);
+int goya_get_fixed_properties(struct hl_device *hdev);
int goya_mmu_init(struct hl_device *hdev);
void goya_init_dma_qmans(struct hl_device *hdev);
void goya_init_mme_qmans(struct hl_device *hdev);
diff --git a/drivers/misc/habanalabs/goya/goya_coresight.c b/drivers/misc/habanalabs/goya/goya_coresight.c
index 1258724ea510..b03912483de0 100644
--- a/drivers/misc/habanalabs/goya/goya_coresight.c
+++ b/drivers/misc/habanalabs/goya/goya_coresight.c
@@ -6,9 +6,9 @@
*/
#include "goyaP.h"
-#include "include/goya/goya_coresight.h"
-#include "include/goya/asic_reg/goya_regs.h"
-#include "include/goya/asic_reg/goya_masks.h"
+#include "../include/goya/goya_coresight.h"
+#include "../include/goya/asic_reg/goya_regs.h"
+#include "../include/goya/asic_reg/goya_masks.h"
#include <uapi/misc/habanalabs.h>
@@ -232,6 +232,7 @@ static int goya_config_stm(struct hl_device *hdev,
{
struct hl_debug_params_stm *input;
u64 base_reg;
+ u32 frequency;
int rc;
if (params->reg_idx >= ARRAY_SIZE(debug_stm_regs)) {
@@ -264,7 +265,10 @@ static int goya_config_stm(struct hl_device *hdev,
WREG32(base_reg + 0xE20, 0xFFFFFFFF);
WREG32(base_reg + 0xEF4, input->id);
WREG32(base_reg + 0xDF4, 0x80);
- WREG32(base_reg + 0xE8C, input->frequency);
+ frequency = hdev->asic_prop.psoc_timestamp_frequency;
+ if (frequency == 0)
+ frequency = input->frequency;
+ WREG32(base_reg + 0xE8C, frequency);
WREG32(base_reg + 0xE90, 0x7FF);
WREG32(base_reg + 0xE80, 0x27 | (input->id << 16));
} else {
@@ -640,7 +644,6 @@ static int goya_config_spmu(struct hl_device *hdev,
int goya_debug_coresight(struct hl_device *hdev, void *data)
{
struct hl_debug_params *params = data;
- u32 val;
int rc = 0;
switch (params->op) {
@@ -672,7 +675,7 @@ int goya_debug_coresight(struct hl_device *hdev, void *data)
}
/* Perform read from the device to flush all configuration */
- val = RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
+ RREG32(mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG);
return rc;
}
diff --git a/drivers/misc/habanalabs/goya/goya_security.c b/drivers/misc/habanalabs/goya/goya_security.c
index de8297001fea..14701836f92b 100644
--- a/drivers/misc/habanalabs/goya/goya_security.c
+++ b/drivers/misc/habanalabs/goya/goya_security.c
@@ -6,7 +6,7 @@
*/
#include "goyaP.h"
-#include "include/goya/asic_reg/goya_regs.h"
+#include "../include/goya/asic_reg/goya_regs.h"
/*
* goya_set_block_as_protected - set the given block as protected
diff --git a/drivers/misc/habanalabs/include/armcp_if.h b/drivers/misc/habanalabs/include/common/armcp_if.h
index a34fc39ad87e..07f9972db28d 100644
--- a/drivers/misc/habanalabs/include/armcp_if.h
+++ b/drivers/misc/habanalabs/include/common/armcp_if.h
@@ -19,9 +19,19 @@ struct hl_eq_header {
__le32 ctl;
};
+struct hl_eq_ecc_data {
+ __le64 ecc_address;
+ __le64 ecc_syndrom;
+ __u8 memory_wrapper_idx;
+ __u8 pad[7];
+};
+
struct hl_eq_entry {
struct hl_eq_header hdr;
- __le64 data[7];
+ union {
+ struct hl_eq_ecc_data ecc_data;
+ __le64 data[7];
+ };
};
#define HL_EQ_ENTRY_SIZE sizeof(struct hl_eq_entry)
@@ -276,6 +286,8 @@ struct armcp_packet {
/* For get Armcp info/EEPROM data */
__le32 data_max_size;
};
+
+ __le32 reserved;
};
struct armcp_unmask_irq_arr_packet {
diff --git a/drivers/misc/habanalabs/include/hl_boot_if.h b/drivers/misc/habanalabs/include/common/hl_boot_if.h
index c22d134e73af..bb67cafc6e00 100644
--- a/drivers/misc/habanalabs/include/hl_boot_if.h
+++ b/drivers/misc/habanalabs/include/common/hl_boot_if.h
@@ -44,6 +44,15 @@
* The NIC FW loading and initialization
* failed. This means NICs are not usable.
*
+ * CPU_BOOT_ERR0_SECURITY_NOT_RDY Chip security initialization has been
+ * started, but is not ready yet - chip
+ * cannot be accessed.
+ *
+ * CPU_BOOT_ERR0_SECURITY_FAIL Security related tasks have failed.
+ * The tasks are security init (root of
+ * trust), boot authentication (chain of
+ * trust), data packets authentication.
+ *
* CPU_BOOT_ERR0_ENABLED Error registers enabled.
* This is a main indication that the
* running FW populates the error
@@ -57,6 +66,8 @@
#define CPU_BOOT_ERR0_BMC_WAIT_SKIPPED (1 << 4)
#define CPU_BOOT_ERR0_NIC_DATA_NOT_RDY (1 << 5)
#define CPU_BOOT_ERR0_NIC_FW_FAIL (1 << 6)
+#define CPU_BOOT_ERR0_SECURITY_NOT_RDY (1 << 7)
+#define CPU_BOOT_ERR0_SECURITY_FAIL (1 << 8)
#define CPU_BOOT_ERR0_ENABLED (1 << 31)
enum cpu_boot_status {
@@ -79,7 +90,10 @@ enum cpu_boot_status {
CPU_BOOT_STATUS_BMC_WAITING_SKIPPED, /* deprecated - will be removed */
/* Last boot loader progress status, ready to receive commands */
CPU_BOOT_STATUS_READY_TO_BOOT = 15,
+ /* Internal Boot finished, ready for boot-fit */
CPU_BOOT_STATUS_WAITING_FOR_BOOT_FIT = 16,
+ /* Internal Security has been initialized, device can be accessed */
+ CPU_BOOT_STATUS_SECURITY_READY = 17,
};
enum kmd_msg {
diff --git a/drivers/misc/habanalabs/include/qman_if.h b/drivers/misc/habanalabs/include/common/qman_if.h
index 0fdb49188ed7..0fdb49188ed7 100644
--- a/drivers/misc/habanalabs/include/qman_if.h
+++ b/drivers/misc/habanalabs/include/common/qman_if.h
diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
index 85e3b5148595..f92dc53af074 100644
--- a/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
+++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/gaudi_regs.h
@@ -91,18 +91,16 @@
#include "psoc_pci_pll_regs.h"
#include "psoc_hbm_pll_regs.h"
+#include "psoc_cpu_pll_regs.h"
-#define GAUDI_ECC_MEM_SEL_OFFSET 0xF18
-#define GAUDI_ECC_ADDRESS_OFFSET 0xF1C
-#define GAUDI_ECC_SYNDROME_OFFSET 0xF20
-#define GAUDI_ECC_SERR0_OFFSET 0xF30
-#define GAUDI_ECC_SERR1_OFFSET 0xF34
-#define GAUDI_ECC_SERR2_OFFSET 0xF38
-#define GAUDI_ECC_SERR3_OFFSET 0xF3C
-#define GAUDI_ECC_DERR0_OFFSET 0xF40
-#define GAUDI_ECC_DERR1_OFFSET 0xF44
-#define GAUDI_ECC_DERR2_OFFSET 0xF48
-#define GAUDI_ECC_DERR3_OFFSET 0xF4C
+#define GAUDI_ECC_MEM_SEL_OFFSET 0xF18
+#define GAUDI_ECC_ADDRESS_OFFSET 0xF1C
+#define GAUDI_ECC_SYNDROME_OFFSET 0xF20
+#define GAUDI_ECC_MEM_INFO_CLR_OFFSET 0xF28
+#define GAUDI_ECC_MEM_INFO_CLR_SERR_MASK BIT(8)
+#define GAUDI_ECC_MEM_INFO_CLR_DERR_MASK BIT(9)
+#define GAUDI_ECC_SERR0_OFFSET 0xF30
+#define GAUDI_ECC_DERR0_OFFSET 0xF40
#define mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_SOB_OBJ_0 0x492000
#define mmSYNC_MNGR_W_S_SYNC_MNGR_OBJS_MON_PAY_ADDRL_0 0x494000
@@ -294,6 +292,7 @@
#define mmPCIE_DBI_DEVICE_ID_VENDOR_ID_REG 0xC02000
+#define mmPCIE_AUX_FLR_CTRL 0xC07394
#define mmPCIE_AUX_DBI 0xC07490
#endif /* ASIC_REG_GAUDI_REGS_H_ */
diff --git a/drivers/misc/habanalabs/include/gaudi/asic_reg/psoc_cpu_pll_regs.h b/drivers/misc/habanalabs/include/gaudi/asic_reg/psoc_cpu_pll_regs.h
new file mode 100644
index 000000000000..2585c70f59ef
--- /dev/null
+++ b/drivers/misc/habanalabs/include/gaudi/asic_reg/psoc_cpu_pll_regs.h
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright 2016-2018 HabanaLabs, Ltd.
+ * All Rights Reserved.
+ *
+ */
+
+/************************************
+ ** This is an auto-generated file **
+ ** DO NOT EDIT BELOW **
+ ************************************/
+
+#ifndef ASIC_REG_PSOC_CPU_PLL_REGS_H_
+#define ASIC_REG_PSOC_CPU_PLL_REGS_H_
+
+/*
+ *****************************************
+ * PSOC_CPU_PLL (Prototype: PLL)
+ *****************************************
+ */
+
+#define mmPSOC_CPU_PLL_NR 0xC70100
+
+#define mmPSOC_CPU_PLL_NF 0xC70104
+
+#define mmPSOC_CPU_PLL_OD 0xC70108
+
+#define mmPSOC_CPU_PLL_NB 0xC7010C
+
+#define mmPSOC_CPU_PLL_CFG 0xC70110
+
+#define mmPSOC_CPU_PLL_LOSE_MASK 0xC70120
+
+#define mmPSOC_CPU_PLL_LOCK_INTR 0xC70128
+
+#define mmPSOC_CPU_PLL_LOCK_BYPASS 0xC7012C
+
+#define mmPSOC_CPU_PLL_DATA_CHNG 0xC70130
+
+#define mmPSOC_CPU_PLL_RST 0xC70134
+
+#define mmPSOC_CPU_PLL_SLIP_WD_CNTR 0xC70150
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_0 0xC70200
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_1 0xC70204
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_2 0xC70208
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_3 0xC7020C
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_CMD_0 0xC70220
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_CMD_1 0xC70224
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_CMD_2 0xC70228
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_CMD_3 0xC7022C
+
+#define mmPSOC_CPU_PLL_DIV_SEL_0 0xC70280
+
+#define mmPSOC_CPU_PLL_DIV_SEL_1 0xC70284
+
+#define mmPSOC_CPU_PLL_DIV_SEL_2 0xC70288
+
+#define mmPSOC_CPU_PLL_DIV_SEL_3 0xC7028C
+
+#define mmPSOC_CPU_PLL_DIV_EN_0 0xC702A0
+
+#define mmPSOC_CPU_PLL_DIV_EN_1 0xC702A4
+
+#define mmPSOC_CPU_PLL_DIV_EN_2 0xC702A8
+
+#define mmPSOC_CPU_PLL_DIV_EN_3 0xC702AC
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_BUSY_0 0xC702C0
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_BUSY_1 0xC702C4
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_BUSY_2 0xC702C8
+
+#define mmPSOC_CPU_PLL_DIV_FACTOR_BUSY_3 0xC702CC
+
+#define mmPSOC_CPU_PLL_CLK_GATER 0xC70300
+
+#define mmPSOC_CPU_PLL_CLK_RLX_0 0xC70310
+
+#define mmPSOC_CPU_PLL_CLK_RLX_1 0xC70314
+
+#define mmPSOC_CPU_PLL_CLK_RLX_2 0xC70318
+
+#define mmPSOC_CPU_PLL_CLK_RLX_3 0xC7031C
+
+#define mmPSOC_CPU_PLL_REF_CNTR_PERIOD 0xC70400
+
+#define mmPSOC_CPU_PLL_REF_LOW_THRESHOLD 0xC70410
+
+#define mmPSOC_CPU_PLL_REF_HIGH_THRESHOLD 0xC70420
+
+#define mmPSOC_CPU_PLL_PLL_NOT_STABLE 0xC70430
+
+#define mmPSOC_CPU_PLL_FREQ_CALC_EN 0xC70440
+
+#define mmPSOC_CPU_PLL_RLX_BITMAP_CFG 0xC70500
+
+#define mmPSOC_CPU_PLL_RLX_BITMAP_0 0xC70510
+
+#define mmPSOC_CPU_PLL_RLX_BITMAP_1 0xC70514
+
+#define mmPSOC_CPU_PLL_RLX_BITMAP_2 0xC70518
+
+#define mmPSOC_CPU_PLL_RLX_BITMAP_3 0xC7051C
+
+#endif /* ASIC_REG_PSOC_CPU_PLL_REGS_H_ */
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
index 96f08050ef0f..13ef6b2887fd 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_masks.h
@@ -455,4 +455,7 @@ enum axi_id {
QM_ARB_ERR_MSG_EN_CHOISE_WDT_MASK |\
QM_ARB_ERR_MSG_EN_AXI_LBW_ERR_MASK)
+#define PCIE_AUX_FLR_CTRL_HW_CTRL_MASK 0x1
+#define PCIE_AUX_FLR_CTRL_INT_MASK_MASK 0x2
+
#endif /* GAUDI_MASKS_H_ */
diff --git a/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h b/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h
index 0f0cd067bb43..f30f2c0458d7 100644
--- a/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h
+++ b/drivers/misc/habanalabs/include/gaudi/gaudi_packets.h
@@ -85,7 +85,7 @@ struct packet_msg_long {
};
#define GAUDI_PKT_SHORT_VAL_SOB_SYNC_VAL_SHIFT 0
-#define GAUDI_PKT_SHORT_VAL_SOB_SYNC_VAL_MASK 0x0000EFFF
+#define GAUDI_PKT_SHORT_VAL_SOB_SYNC_VAL_MASK 0x00007FFF
#define GAUDI_PKT_SHORT_VAL_SOB_MOD_SHIFT 31
#define GAUDI_PKT_SHORT_VAL_SOB_MOD_MASK 0x80000000
@@ -141,7 +141,7 @@ struct packet_msg_prot {
#define GAUDI_PKT_FENCE_CFG_TARGET_VAL_MASK 0x00FF0000
#define GAUDI_PKT_FENCE_CFG_ID_SHIFT 30
-#define GAUDI_PKT_FENCE_CFG_ID_MASK 0xC000000
+#define GAUDI_PKT_FENCE_CFG_ID_MASK 0xC0000000
#define GAUDI_PKT_FENCE_CTL_PRED_SHIFT 0
#define GAUDI_PKT_FENCE_CTL_PRED_MASK 0x0000001F
diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c
index 927309b86bab..fea3ae9d8686 100644
--- a/drivers/misc/hpilo.c
+++ b/drivers/misc/hpilo.c
@@ -207,7 +207,7 @@ static void ctrl_setup(struct ccb *ccb, int nr_desc, int l2desc_sz)
static inline int fifo_sz(int nr_entry)
{
/* size of a fifo is determined by the number of entries it contains */
- return (nr_entry * sizeof(u64)) + FIFOHANDLESIZE;
+ return nr_entry * sizeof(u64) + FIFOHANDLESIZE;
}
static void fifo_setup(void *base_addr, int nr_entry)
@@ -256,7 +256,8 @@ static void ilo_ccb_close(struct pci_dev *pdev, struct ccb_data *data)
memset_io(device_ccb, 0, sizeof(struct ccb));
/* free resources used to back send/recv queues */
- pci_free_consistent(pdev, data->dma_size, data->dma_va, data->dma_pa);
+ dma_free_coherent(&pdev->dev, data->dma_size, data->dma_va,
+ data->dma_pa);
}
static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
@@ -272,16 +273,14 @@ static int ilo_ccb_setup(struct ilo_hwinfo *hw, struct ccb_data *data, int slot)
2 * desc_mem_sz(NR_QENTRY) +
ILO_START_ALIGN + ILO_CACHE_SZ;
- data->dma_va = pci_alloc_consistent(hw->ilo_dev, data->dma_size,
- &data->dma_pa);
+ data->dma_va = dma_alloc_coherent(&hw->ilo_dev->dev, data->dma_size,
+ &data->dma_pa, GFP_ATOMIC);
if (!data->dma_va)
return -ENOMEM;
dma_va = (char *)data->dma_va;
dma_pa = data->dma_pa;
- memset(dma_va, 0, data->dma_size);
-
dma_va = (char *)roundup((unsigned long)dma_va, ILO_START_ALIGN);
dma_pa = roundup(dma_pa, ILO_START_ALIGN);
diff --git a/drivers/misc/hpilo.h b/drivers/misc/hpilo.h
index 1aa433a7f66c..f69ff645cac9 100644
--- a/drivers/misc/hpilo.h
+++ b/drivers/misc/hpilo.h
@@ -160,23 +160,23 @@ struct ccb_data {
#define ILO_START_ALIGN 4096
#define ILO_CACHE_SZ 128
struct fifo {
- u64 nrents; /* user requested number of fifo entries */
- u64 imask; /* mask to extract valid fifo index */
- u64 merge; /* O/C bits to merge in during enqueue operation */
- u64 reset; /* set to non-zero when the target device resets */
- u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)];
+ u64 nrents; /* user requested number of fifo entries */
+ u64 imask; /* mask to extract valid fifo index */
+ u64 merge; /* O/C bits to merge in during enqueue operation */
+ u64 reset; /* set to non-zero when the target device resets */
+ u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)];
- u64 head;
- u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))];
+ u64 head;
+ u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))];
- u64 tail;
- u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))];
+ u64 tail;
+ u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))];
- u64 fifobar[1];
+ u64 fifobar[];
};
/* convert between struct fifo, and the fifobar, which is saved in the ccb */
-#define FIFOHANDLESIZE (sizeof(struct fifo) - sizeof(u64))
+#define FIFOHANDLESIZE (sizeof(struct fifo))
#define FIFOBARTOHANDLE(_fifo) \
((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE))
diff --git a/drivers/misc/ibmasm/command.c b/drivers/misc/ibmasm/command.c
index 2863657fa268..733dd30fbacc 100644
--- a/drivers/misc/ibmasm/command.c
+++ b/drivers/misc/ibmasm/command.c
@@ -94,7 +94,7 @@ static inline void do_exec_command(struct service_processor *sp)
}
}
-/**
+/*
* exec_command
* send a command to a service processor
* Commands are executed sequentially. One command (sp->current_command)
@@ -140,7 +140,7 @@ static void exec_next_command(struct service_processor *sp)
}
}
-/**
+/*
* Sleep until a command has failed or a response has been received
* and the command status been updated by the interrupt handler.
* (see receive_response).
@@ -153,7 +153,7 @@ void ibmasm_wait_for_response(struct command *cmd, int timeout)
timeout * HZ);
}
-/**
+/*
* receive_command_response
* called by the interrupt handler when a dot command of type command_response
* was received.
diff --git a/drivers/misc/ibmasm/dot_command.c b/drivers/misc/ibmasm/dot_command.c
index 70273a4cb352..df389bd4c9df 100644
--- a/drivers/misc/ibmasm/dot_command.c
+++ b/drivers/misc/ibmasm/dot_command.c
@@ -10,7 +10,7 @@
#include "ibmasm.h"
#include "dot_command.h"
-/**
+/*
* Dispatch an incoming message to the specific handler for the message.
* Called from interrupt context.
*/
@@ -48,7 +48,7 @@ void ibmasm_receive_message(struct service_processor *sp, void *message, int mes
#define INIT_BUFFER_SIZE 32
-/**
+/*
* send the 4.3.5.10 dot command (driver VPD) to the service processor
*/
int ibmasm_send_driver_vpd(struct service_processor *sp)
@@ -99,7 +99,7 @@ struct os_state_command {
unsigned char data;
};
-/**
+/*
* send the 4.3.6 dot command (os state) to the service processor
* During driver init this function is called with os state "up".
* This causes the service processor to start sending heartbeats the
diff --git a/drivers/misc/ibmasm/event.c b/drivers/misc/ibmasm/event.c
index 974d63f5a4dd..40ce75f8970c 100644
--- a/drivers/misc/ibmasm/event.c
+++ b/drivers/misc/ibmasm/event.c
@@ -31,7 +31,7 @@ static void wake_up_event_readers(struct service_processor *sp)
wake_up_interruptible(&reader->wait);
}
-/**
+/*
* receive_event
* Called by the interrupt handler when a dot command of type sp_event is
* received.
@@ -68,7 +68,7 @@ static inline int event_available(struct event_buffer *b, struct event_reader *r
return (r->next_serial_number < b->next_serial_number);
}
-/**
+/*
* get_next_event
* Called by event readers (initiated from user space through the file
* system).
diff --git a/drivers/misc/ibmasm/r_heartbeat.c b/drivers/misc/ibmasm/r_heartbeat.c
index 6567df638ea9..21c9b6a6f2c3 100644
--- a/drivers/misc/ibmasm/r_heartbeat.c
+++ b/drivers/misc/ibmasm/r_heartbeat.c
@@ -39,7 +39,7 @@ void ibmasm_init_reverse_heartbeat(struct service_processor *sp, struct reverse_
rhb->stopped = 0;
}
-/**
+/*
* start_reverse_heartbeat
* Loop forever, sending a reverse heartbeat dot command to the service
* processor, then sleeping. The loop comes to an end if the service
diff --git a/drivers/misc/ibmvmc.c b/drivers/misc/ibmvmc.c
index 2ed23c99f59f..c0d139c26505 100644
--- a/drivers/misc/ibmvmc.c
+++ b/drivers/misc/ibmvmc.c
@@ -760,7 +760,7 @@ static int ibmvmc_send_rem_buffer_resp(struct crq_server_adapter *adapter,
* @adapter: crq_server_adapter struct
* @buffer: ibmvmc_buffer struct
* @hmc: ibmvmc_hmc struct
- * @msg_length: message length field
+ * @msg_len: message length field
*
* This command is sent between the management partition and the hypervisor
* in order to signal the arrival of an HMC protocol message. The command
@@ -1028,7 +1028,7 @@ static unsigned int ibmvmc_poll(struct file *file, poll_table *wait)
* ibmvmc_write - Write
*
* @file: file struct
- * @buf: Character buffer
+ * @buffer: Character buffer
* @count: Count field
* @ppos: Offset
*
@@ -1347,7 +1347,7 @@ static long ibmvmc_ioctl_requestvmc(struct ibmvmc_file_session *session,
/**
* ibmvmc_ioctl - IOCTL
*
- * @session: ibmvmc_file_session struct
+ * @file: file information
* @cmd: cmd field
* @arg: Argument field
*
diff --git a/drivers/misc/lattice-ecp3-config.c b/drivers/misc/lattice-ecp3-config.c
index 884485c3f723..5eaf74447ca1 100644
--- a/drivers/misc/lattice-ecp3-config.c
+++ b/drivers/misc/lattice-ecp3-config.c
@@ -67,7 +67,6 @@ static void firmware_load(const struct firmware *fw, void *context)
struct spi_device *spi = (struct spi_device *)context;
struct fpga_data *data = spi_get_drvdata(spi);
u8 *buffer;
- int ret;
u8 txbuf[8];
u8 rxbuf[8];
int rx_len = 8;
@@ -92,7 +91,7 @@ static void firmware_load(const struct firmware *fw, void *context)
/* Trying to speak with the FPGA via SPI... */
txbuf[0] = FPGA_CMD_READ_ID;
- ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+ spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
jedec_id = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id);
@@ -110,7 +109,7 @@ static void firmware_load(const struct firmware *fw, void *context)
dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name);
txbuf[0] = FPGA_CMD_READ_STATUS;
- ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+ spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
@@ -130,20 +129,20 @@ static void firmware_load(const struct firmware *fw, void *context)
memcpy(buffer + 4, fw->data, fw->size);
txbuf[0] = FPGA_CMD_REFRESH;
- ret = spi_write(spi, txbuf, 4);
+ spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_WRITE_EN;
- ret = spi_write(spi, txbuf, 4);
+ spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_CLEAR;
- ret = spi_write(spi, txbuf, 4);
+ spi_write(spi, txbuf, 4);
/*
* Wait for FPGA memory to become cleared
*/
for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) {
txbuf[0] = FPGA_CMD_READ_STATUS;
- ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+ spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
if (status == FPGA_STATUS_CLEARED)
break;
@@ -160,13 +159,13 @@ static void firmware_load(const struct firmware *fw, void *context)
}
dev_info(&spi->dev, "Configuring the FPGA...\n");
- ret = spi_write(spi, buffer, fw->size + 8);
+ spi_write(spi, buffer, fw->size + 8);
txbuf[0] = FPGA_CMD_WRITE_DIS;
- ret = spi_write(spi, txbuf, 4);
+ spi_write(spi, txbuf, 4);
txbuf[0] = FPGA_CMD_READ_STATUS;
- ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
+ spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len);
status = get_unaligned_be32(&rxbuf[4]);
dev_dbg(&spi->dev, "FPGA Status=%08x\n", status);
diff --git a/drivers/misc/lkdtm/bugs.c b/drivers/misc/lkdtm/bugs.c
index 736675f0a246..4dfbfd51bdf7 100644
--- a/drivers/misc/lkdtm/bugs.c
+++ b/drivers/misc/lkdtm/bugs.c
@@ -13,7 +13,7 @@
#include <linux/uaccess.h>
#include <linux/slab.h>
-#ifdef CONFIG_X86_32
+#if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML)
#include <asm/desc.h>
#endif
@@ -118,9 +118,8 @@ noinline void lkdtm_CORRUPT_STACK(void)
/* Use default char array length that triggers stack protection. */
char data[8] __aligned(sizeof(void *));
- __lkdtm_CORRUPT_STACK(&data);
-
- pr_info("Corrupted stack containing char array ...\n");
+ pr_info("Corrupting stack containing char array ...\n");
+ __lkdtm_CORRUPT_STACK((void *)&data);
}
/* Same as above but will only get a canary with -fstack-protector-strong */
@@ -131,9 +130,8 @@ noinline void lkdtm_CORRUPT_STACK_STRONG(void)
unsigned long *ptr;
} data __aligned(sizeof(void *));
- __lkdtm_CORRUPT_STACK(&data);
-
- pr_info("Corrupted stack containing union ...\n");
+ pr_info("Corrupting stack containing union ...\n");
+ __lkdtm_CORRUPT_STACK((void *)&data);
}
void lkdtm_UNALIGNED_LOAD_STORE_WRITE(void)
@@ -248,6 +246,7 @@ void lkdtm_ARRAY_BOUNDS(void)
kfree(not_checked);
kfree(checked);
+ pr_err("FAIL: survived array bounds overflow!\n");
}
void lkdtm_CORRUPT_LIST_ADD(void)
@@ -334,7 +333,7 @@ void lkdtm_STACK_GUARD_PAGE_LEADING(void)
byte = *ptr;
- pr_err("FAIL: accessed page before stack!\n");
+ pr_err("FAIL: accessed page before stack! (byte: %x)\n", byte);
}
/* Test that VMAP_STACK is actually allocating with a trailing guard page */
@@ -348,7 +347,7 @@ void lkdtm_STACK_GUARD_PAGE_TRAILING(void)
byte = *ptr;
- pr_err("FAIL: accessed page after stack!\n");
+ pr_err("FAIL: accessed page after stack! (byte: %x)\n", byte);
}
void lkdtm_UNSET_SMEP(void)
@@ -419,7 +418,7 @@ void lkdtm_UNSET_SMEP(void)
void lkdtm_DOUBLE_FAULT(void)
{
-#ifdef CONFIG_X86_32
+#if IS_ENABLED(CONFIG_X86_32) && !IS_ENABLED(CONFIG_UML)
/*
* Trigger #DF by setting the stack limit to zero. This clobbers
* a GDT TLS slot, which is okay because the current task will die
@@ -454,38 +453,42 @@ void lkdtm_DOUBLE_FAULT(void)
#endif
}
-#ifdef CONFIG_ARM64_PTR_AUTH
+#ifdef CONFIG_ARM64
static noinline void change_pac_parameters(void)
{
- /* Reset the keys of current task */
- ptrauth_thread_init_kernel(current);
- ptrauth_thread_switch_kernel(current);
+ if (IS_ENABLED(CONFIG_ARM64_PTR_AUTH)) {
+ /* Reset the keys of current task */
+ ptrauth_thread_init_kernel(current);
+ ptrauth_thread_switch_kernel(current);
+ }
}
+#endif
-#define CORRUPT_PAC_ITERATE 10
noinline void lkdtm_CORRUPT_PAC(void)
{
+#ifdef CONFIG_ARM64
+#define CORRUPT_PAC_ITERATE 10
int i;
+ if (!IS_ENABLED(CONFIG_ARM64_PTR_AUTH))
+ pr_err("FAIL: kernel not built with CONFIG_ARM64_PTR_AUTH\n");
+
if (!system_supports_address_auth()) {
- pr_err("FAIL: arm64 pointer authentication feature not present\n");
+ pr_err("FAIL: CPU lacks pointer authentication feature\n");
return;
}
- pr_info("Change the PAC parameters to force function return failure\n");
+ pr_info("changing PAC parameters to force function return failure...\n");
/*
- * Pac is a hash value computed from input keys, return address and
+ * PAC is a hash value computed from input keys, return address and
* stack pointer. As pac has fewer bits so there is a chance of
* collision, so iterate few times to reduce the collision probability.
*/
for (i = 0; i < CORRUPT_PAC_ITERATE; i++)
change_pac_parameters();
- pr_err("FAIL: %s test failed. Kernel may be unstable from here\n", __func__);
-}
-#else /* !CONFIG_ARM64_PTR_AUTH */
-noinline void lkdtm_CORRUPT_PAC(void)
-{
- pr_err("FAIL: arm64 pointer authentication config disabled\n");
-}
+ pr_err("FAIL: survived PAC changes! Kernel may be unstable from here\n");
+#else
+ pr_err("XFAIL: this test is arm64-only\n");
#endif
+}
diff --git a/drivers/misc/lkdtm/heap.c b/drivers/misc/lkdtm/heap.c
index 3c5cec85edce..1323bc16f113 100644
--- a/drivers/misc/lkdtm/heap.c
+++ b/drivers/misc/lkdtm/heap.c
@@ -58,11 +58,12 @@ void lkdtm_READ_AFTER_FREE(void)
int *base, *val, saw;
size_t len = 1024;
/*
- * The slub allocator uses the first word to store the free
- * pointer in some configurations. Use the middle of the
- * allocation to avoid running into the freelist
+ * The slub allocator will use the either the first word or
+ * the middle of the allocation to store the free pointer,
+ * depending on configurations. Store in the second word to
+ * avoid running into the freelist.
*/
- size_t offset = (len / sizeof(*base)) / 2;
+ size_t offset = sizeof(*base);
base = kmalloc(len, GFP_KERNEL);
if (!base) {
diff --git a/drivers/misc/lkdtm/lkdtm.h b/drivers/misc/lkdtm/lkdtm.h
index 601a2156a0d4..8878538b2c13 100644
--- a/drivers/misc/lkdtm/lkdtm.h
+++ b/drivers/misc/lkdtm/lkdtm.h
@@ -31,9 +31,7 @@ void lkdtm_CORRUPT_USER_DS(void);
void lkdtm_STACK_GUARD_PAGE_LEADING(void);
void lkdtm_STACK_GUARD_PAGE_TRAILING(void);
void lkdtm_UNSET_SMEP(void);
-#ifdef CONFIG_X86_32
void lkdtm_DOUBLE_FAULT(void);
-#endif
void lkdtm_CORRUPT_PAC(void);
/* lkdtm_heap.c */
diff --git a/drivers/misc/lkdtm/perms.c b/drivers/misc/lkdtm/perms.c
index 62f76d506f04..2dede2ef658f 100644
--- a/drivers/misc/lkdtm/perms.c
+++ b/drivers/misc/lkdtm/perms.c
@@ -57,6 +57,7 @@ static noinline void execute_location(void *dst, bool write)
}
pr_info("attempting bad execution at %px\n", func);
func();
+ pr_err("FAIL: func returned\n");
}
static void execute_user_location(void *dst)
@@ -75,20 +76,22 @@ static void execute_user_location(void *dst)
return;
pr_info("attempting bad execution at %px\n", func);
func();
+ pr_err("FAIL: func returned\n");
}
void lkdtm_WRITE_RO(void)
{
- /* Explicitly cast away "const" for the test. */
- unsigned long *ptr = (unsigned long *)&rodata;
+ /* Explicitly cast away "const" for the test and make volatile. */
+ volatile unsigned long *ptr = (unsigned long *)&rodata;
pr_info("attempting bad rodata write at %px\n", ptr);
*ptr ^= 0xabcd1234;
+ pr_err("FAIL: survived bad write\n");
}
void lkdtm_WRITE_RO_AFTER_INIT(void)
{
- unsigned long *ptr = &ro_after_init;
+ volatile unsigned long *ptr = &ro_after_init;
/*
* Verify we were written to during init. Since an Oops
@@ -102,19 +105,21 @@ void lkdtm_WRITE_RO_AFTER_INIT(void)
pr_info("attempting bad ro_after_init write at %px\n", ptr);
*ptr ^= 0xabcd1234;
+ pr_err("FAIL: survived bad write\n");
}
void lkdtm_WRITE_KERN(void)
{
size_t size;
- unsigned char *ptr;
+ volatile unsigned char *ptr;
size = (unsigned long)do_overwritten - (unsigned long)do_nothing;
ptr = (unsigned char *)do_overwritten;
pr_info("attempting bad %zu byte write at %px\n", size, ptr);
- memcpy(ptr, (unsigned char *)do_nothing, size);
+ memcpy((void *)ptr, (unsigned char *)do_nothing, size);
flush_icache_range((unsigned long)ptr, (unsigned long)(ptr + size));
+ pr_err("FAIL: survived bad write\n");
do_overwritten();
}
@@ -193,9 +198,11 @@ void lkdtm_ACCESS_USERSPACE(void)
pr_info("attempting bad read at %px\n", ptr);
tmp = *ptr;
tmp += 0xc0dec0de;
+ pr_err("FAIL: survived bad read\n");
pr_info("attempting bad write at %px\n", ptr);
*ptr = tmp;
+ pr_err("FAIL: survived bad write\n");
vm_munmap(user_addr, PAGE_SIZE);
}
@@ -203,19 +210,20 @@ void lkdtm_ACCESS_USERSPACE(void)
void lkdtm_ACCESS_NULL(void)
{
unsigned long tmp;
- unsigned long *ptr = (unsigned long *)NULL;
+ volatile unsigned long *ptr = (unsigned long *)NULL;
pr_info("attempting bad read at %px\n", ptr);
tmp = *ptr;
tmp += 0xc0dec0de;
+ pr_err("FAIL: survived bad read\n");
pr_info("attempting bad write at %px\n", ptr);
*ptr = tmp;
+ pr_err("FAIL: survived bad write\n");
}
void __init lkdtm_perms_init(void)
{
/* Make sure we can write to __ro_after_init values during __init */
ro_after_init |= 0xAA;
-
}
diff --git a/drivers/misc/lkdtm/usercopy.c b/drivers/misc/lkdtm/usercopy.c
index e172719dd86d..b833367a45d0 100644
--- a/drivers/misc/lkdtm/usercopy.c
+++ b/drivers/misc/lkdtm/usercopy.c
@@ -304,19 +304,22 @@ void lkdtm_USERCOPY_KERNEL(void)
return;
}
- pr_info("attempting good copy_to_user from kernel rodata\n");
+ pr_info("attempting good copy_to_user from kernel rodata: %px\n",
+ test_text);
if (copy_to_user((void __user *)user_addr, test_text,
unconst + sizeof(test_text))) {
pr_warn("copy_to_user failed unexpectedly?!\n");
goto free_user;
}
- pr_info("attempting bad copy_to_user from kernel text\n");
+ pr_info("attempting bad copy_to_user from kernel text: %px\n",
+ vm_mmap);
if (copy_to_user((void __user *)user_addr, vm_mmap,
unconst + PAGE_SIZE)) {
pr_warn("copy_to_user failed, but lacked Oops\n");
goto free_user;
}
+ pr_err("FAIL: survived bad copy_to_user()\n");
free_user:
vm_munmap(user_addr, PAGE_SIZE);
diff --git a/drivers/misc/mei/Kconfig b/drivers/misc/mei/Kconfig
index 9d7b3719bfa0..f5fd5b786607 100644
--- a/drivers/misc/mei/Kconfig
+++ b/drivers/misc/mei/Kconfig
@@ -9,7 +9,7 @@ config INTEL_MEI
if selected /dev/mei misc device will be created.
For more information see
- <http://software.intel.com/en-us/manageability/>
+ <https://software.intel.com/en-us/manageability/>
config INTEL_MEI_ME
tristate "ME Enabled Intel Chipsets"
diff --git a/drivers/misc/mei/bus-fixup.c b/drivers/misc/mei/bus-fixup.c
index 910f059b3384..07ba16d46690 100644
--- a/drivers/misc/mei/bus-fixup.c
+++ b/drivers/misc/mei/bus-fixup.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2013-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -159,17 +159,17 @@ static int mei_osver(struct mei_cl_device *cldev)
static int mei_fwver(struct mei_cl_device *cldev)
{
char buf[MKHI_FWVER_BUF_LEN];
- struct mkhi_msg *req;
+ struct mkhi_msg req;
+ struct mkhi_msg *rsp;
struct mkhi_fw_ver *fwver;
int bytes_recv, ret, i;
memset(buf, 0, sizeof(buf));
- req = (struct mkhi_msg *)buf;
- req->hdr.group_id = MKHI_GEN_GROUP_ID;
- req->hdr.command = MKHI_GEN_GET_FW_VERSION_CMD;
+ req.hdr.group_id = MKHI_GEN_GROUP_ID;
+ req.hdr.command = MKHI_GEN_GET_FW_VERSION_CMD;
- ret = __mei_cl_send(cldev->cl, buf, sizeof(struct mkhi_msg_hdr),
+ ret = __mei_cl_send(cldev->cl, (u8 *)&req, sizeof(req),
MEI_CL_IO_TX_BLOCKING);
if (ret < 0) {
dev_err(&cldev->dev, "Could not send ReqFWVersion cmd\n");
@@ -188,7 +188,8 @@ static int mei_fwver(struct mei_cl_device *cldev)
return -EIO;
}
- fwver = (struct mkhi_fw_ver *)req->data;
+ rsp = (struct mkhi_msg *)buf;
+ fwver = (struct mkhi_fw_ver *)rsp->data;
memset(cldev->bus->fw_ver, 0, sizeof(cldev->bus->fw_ver));
for (i = 0; i < MEI_MAX_FW_VER_BLOCKS; i++) {
if ((size_t)bytes_recv < MKHI_FWVER_LEN(i + 1))
@@ -329,16 +330,14 @@ static int mei_nfc_if_version(struct mei_cl *cl,
WARN_ON(mutex_is_locked(&bus->device_lock));
- ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(struct mei_nfc_cmd),
- MEI_CL_IO_TX_BLOCKING);
+ ret = __mei_cl_send(cl, (u8 *)&cmd, sizeof(cmd), MEI_CL_IO_TX_BLOCKING);
if (ret < 0) {
dev_err(bus->dev, "Could not send IF version cmd\n");
return ret;
}
/* to be sure on the stack we alloc memory */
- if_version_length = sizeof(struct mei_nfc_reply) +
- sizeof(struct mei_nfc_if_version);
+ if_version_length = sizeof(*reply) + sizeof(*ver);
reply = kzalloc(if_version_length, GFP_KERNEL);
if (!reply)
@@ -352,7 +351,7 @@ static int mei_nfc_if_version(struct mei_cl *cl,
goto err;
}
- memcpy(ver, reply->data, sizeof(struct mei_nfc_if_version));
+ memcpy(ver, reply->data, sizeof(*ver));
dev_info(bus->dev, "NFC MEI VERSION: IVN 0x%x Vendor ID 0x%x Type 0x%x\n",
ver->fw_ivn, ver->vendor_id, ver->radio_type);
diff --git a/drivers/misc/mei/bus.c b/drivers/misc/mei/bus.c
index f476dbc7252b..a6dfc3ce1db2 100644
--- a/drivers/misc/mei/bus.c
+++ b/drivers/misc/mei/bus.c
@@ -931,7 +931,7 @@ static struct mei_cl_device *mei_cl_bus_dev_alloc(struct mei_device *bus,
struct mei_cl_device *cldev;
struct mei_cl *cl;
- cldev = kzalloc(sizeof(struct mei_cl_device), GFP_KERNEL);
+ cldev = kzalloc(sizeof(*cldev), GFP_KERNEL);
if (!cldev)
return NULL;
diff --git a/drivers/misc/mei/client.c b/drivers/misc/mei/client.c
index b32c825a0945..2572887d99b6 100644
--- a/drivers/misc/mei/client.c
+++ b/drivers/misc/mei/client.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2003-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -369,7 +369,7 @@ static struct mei_cl_cb *mei_io_cb_init(struct mei_cl *cl,
{
struct mei_cl_cb *cb;
- cb = kzalloc(sizeof(struct mei_cl_cb), GFP_KERNEL);
+ cb = kzalloc(sizeof(*cb), GFP_KERNEL);
if (!cb)
return NULL;
@@ -552,7 +552,7 @@ int mei_cl_flush_queues(struct mei_cl *cl, const struct file *fp)
*/
static void mei_cl_init(struct mei_cl *cl, struct mei_device *dev)
{
- memset(cl, 0, sizeof(struct mei_cl));
+ memset(cl, 0, sizeof(*cl));
init_waitqueue_head(&cl->wait);
init_waitqueue_head(&cl->rx_wait);
init_waitqueue_head(&cl->tx_wait);
@@ -575,7 +575,7 @@ struct mei_cl *mei_cl_allocate(struct mei_device *dev)
{
struct mei_cl *cl;
- cl = kmalloc(sizeof(struct mei_cl), GFP_KERNEL);
+ cl = kmalloc(sizeof(*cl), GFP_KERNEL);
if (!cl)
return NULL;
diff --git a/drivers/misc/mei/hbm.c b/drivers/misc/mei/hbm.c
index a44094cdbc36..308caee86920 100644
--- a/drivers/misc/mei/hbm.c
+++ b/drivers/misc/mei/hbm.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2003-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
#include <linux/export.h>
@@ -257,22 +257,21 @@ int mei_hbm_start_wait(struct mei_device *dev)
int mei_hbm_start_req(struct mei_device *dev)
{
struct mei_msg_hdr mei_hdr;
- struct hbm_host_version_request start_req;
- const size_t len = sizeof(struct hbm_host_version_request);
+ struct hbm_host_version_request req;
int ret;
mei_hbm_reset(dev);
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
/* host start message */
- memset(&start_req, 0, len);
- start_req.hbm_cmd = HOST_START_REQ_CMD;
- start_req.host_version.major_version = HBM_MAJOR_VERSION;
- start_req.host_version.minor_version = HBM_MINOR_VERSION;
+ memset(&req, 0, sizeof(req));
+ req.hbm_cmd = HOST_START_REQ_CMD;
+ req.host_version.major_version = HBM_MAJOR_VERSION;
+ req.host_version.minor_version = HBM_MINOR_VERSION;
dev->hbm_state = MEI_HBM_IDLE;
- ret = mei_hbm_write_message(dev, &mei_hdr, &start_req);
+ ret = mei_hbm_write_message(dev, &mei_hdr, &req);
if (ret) {
dev_err(dev->dev, "version message write failed: ret = %d\n",
ret);
@@ -295,13 +294,12 @@ static int mei_hbm_dma_setup_req(struct mei_device *dev)
{
struct mei_msg_hdr mei_hdr;
struct hbm_dma_setup_request req;
- const size_t len = sizeof(struct hbm_dma_setup_request);
unsigned int i;
int ret;
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
- memset(&req, 0, len);
+ memset(&req, 0, sizeof(req));
req.hbm_cmd = MEI_HBM_DMA_SETUP_REQ_CMD;
for (i = 0; i < DMA_DSCR_NUM; i++) {
phys_addr_t paddr;
@@ -337,21 +335,19 @@ static int mei_hbm_dma_setup_req(struct mei_device *dev)
static int mei_hbm_enum_clients_req(struct mei_device *dev)
{
struct mei_msg_hdr mei_hdr;
- struct hbm_host_enum_request enum_req;
- const size_t len = sizeof(struct hbm_host_enum_request);
+ struct hbm_host_enum_request req;
int ret;
/* enumerate clients */
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
- memset(&enum_req, 0, len);
- enum_req.hbm_cmd = HOST_ENUM_REQ_CMD;
- enum_req.flags |= dev->hbm_f_dc_supported ?
- MEI_HBM_ENUM_F_ALLOW_ADD : 0;
- enum_req.flags |= dev->hbm_f_ie_supported ?
+ memset(&req, 0, sizeof(req));
+ req.hbm_cmd = HOST_ENUM_REQ_CMD;
+ req.flags |= dev->hbm_f_dc_supported ? MEI_HBM_ENUM_F_ALLOW_ADD : 0;
+ req.flags |= dev->hbm_f_ie_supported ?
MEI_HBM_ENUM_F_IMMEDIATE_ENUM : 0;
- ret = mei_hbm_write_message(dev, &mei_hdr, &enum_req);
+ ret = mei_hbm_write_message(dev, &mei_hdr, &req);
if (ret) {
dev_err(dev->dev, "enumeration request write failed: ret = %d.\n",
ret);
@@ -380,7 +376,7 @@ static int mei_hbm_me_cl_add(struct mei_device *dev,
mei_me_cl_rm_by_uuid(dev, uuid);
- me_cl = kzalloc(sizeof(struct mei_me_client), GFP_KERNEL);
+ me_cl = kzalloc(sizeof(*me_cl), GFP_KERNEL);
if (!me_cl)
return -ENOMEM;
@@ -408,14 +404,13 @@ static int mei_hbm_add_cl_resp(struct mei_device *dev, u8 addr, u8 status)
{
struct mei_msg_hdr mei_hdr;
struct hbm_add_client_response resp;
- const size_t len = sizeof(struct hbm_add_client_response);
int ret;
dev_dbg(dev->dev, "adding client response\n");
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(resp));
- memset(&resp, 0, sizeof(struct hbm_add_client_response));
+ memset(&resp, 0, sizeof(resp));
resp.hbm_cmd = MEI_HBM_ADD_CLIENT_RES_CMD;
resp.me_addr = addr;
resp.status = status;
@@ -469,11 +464,10 @@ int mei_hbm_cl_notify_req(struct mei_device *dev,
struct mei_msg_hdr mei_hdr;
struct hbm_notification_request req;
- const size_t len = sizeof(struct hbm_notification_request);
int ret;
- mei_hbm_hdr(&mei_hdr, len);
- mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, &req, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
+ mei_hbm_cl_hdr(cl, MEI_HBM_NOTIFY_REQ_CMD, &req, sizeof(req));
req.start = start;
@@ -580,8 +574,7 @@ static void mei_hbm_cl_notify(struct mei_device *dev,
static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx)
{
struct mei_msg_hdr mei_hdr;
- struct hbm_props_request prop_req;
- const size_t len = sizeof(struct hbm_props_request);
+ struct hbm_props_request req;
unsigned long addr;
int ret;
@@ -591,18 +584,17 @@ static int mei_hbm_prop_req(struct mei_device *dev, unsigned long start_idx)
if (addr == MEI_CLIENTS_MAX) {
dev->hbm_state = MEI_HBM_STARTED;
mei_host_client_init(dev);
-
return 0;
}
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
- memset(&prop_req, 0, sizeof(struct hbm_props_request));
+ memset(&req, 0, sizeof(req));
- prop_req.hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
- prop_req.me_addr = addr;
+ req.hbm_cmd = HOST_CLIENT_PROPERTIES_REQ_CMD;
+ req.me_addr = addr;
- ret = mei_hbm_write_message(dev, &mei_hdr, &prop_req);
+ ret = mei_hbm_write_message(dev, &mei_hdr, &req);
if (ret) {
dev_err(dev->dev, "properties request write failed: ret = %d\n",
ret);
@@ -628,15 +620,14 @@ int mei_hbm_pg(struct mei_device *dev, u8 pg_cmd)
{
struct mei_msg_hdr mei_hdr;
struct hbm_power_gate req;
- const size_t len = sizeof(struct hbm_power_gate);
int ret;
if (!dev->hbm_f_pg_supported)
return -EOPNOTSUPP;
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
- memset(&req, 0, len);
+ memset(&req, 0, sizeof(req));
req.hbm_cmd = pg_cmd;
ret = mei_hbm_write_message(dev, &mei_hdr, &req);
@@ -657,11 +648,10 @@ static int mei_hbm_stop_req(struct mei_device *dev)
{
struct mei_msg_hdr mei_hdr;
struct hbm_host_stop_request req;
- const size_t len = sizeof(struct hbm_host_stop_request);
- mei_hbm_hdr(&mei_hdr, len);
+ mei_hbm_hdr(&mei_hdr, sizeof(req));
- memset(&req, 0, len);
+ memset(&req, 0, sizeof(req));
req.hbm_cmd = HOST_STOP_REQ_CMD;
req.reason = DRIVER_STOP_REQUEST;
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.c b/drivers/misc/mei/hdcp/mei_hdcp.c
index 4c596c646ac0..d1d3e025ca0e 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.c
+++ b/drivers/misc/mei/hdcp/mei_hdcp.c
@@ -572,7 +572,7 @@ static int mei_hdcp_verify_mprime(struct device *dev,
HDCP_2_2_MPRIME_LEN);
drm_hdcp_cpu_to_be24(verify_mprime_in.seq_num_m, data->seq_num_m);
memcpy(verify_mprime_in.streams, data->streams,
- (data->k * sizeof(struct hdcp2_streamid_type)));
+ array_size(data->k, sizeof(*data->streams)));
verify_mprime_in.k = cpu_to_be16(data->k);
@@ -852,7 +852,7 @@ static int mei_hdcp_remove(struct mei_cl_device *cldev)
#define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \
0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04)
-static struct mei_cl_device_id mei_hdcp_tbl[] = {
+static const struct mei_cl_device_id mei_hdcp_tbl[] = {
{ .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY },
{ }
};
diff --git a/drivers/misc/mei/hdcp/mei_hdcp.h b/drivers/misc/mei/hdcp/mei_hdcp.h
index 18ffc773fa18..834757f5e072 100644
--- a/drivers/misc/mei/hdcp/mei_hdcp.h
+++ b/drivers/misc/mei/hdcp/mei_hdcp.h
@@ -358,7 +358,7 @@ struct wired_cmd_repeater_auth_stream_req_in {
u8 seq_num_m[HDCP_2_2_SEQ_NUM_LEN];
u8 m_prime[HDCP_2_2_MPRIME_LEN];
__be16 k;
- struct hdcp2_streamid_type streams[1];
+ struct hdcp2_streamid_type streams[];
} __packed;
struct wired_cmd_repeater_auth_stream_req_out {
diff --git a/drivers/misc/mei/hw-me-regs.h b/drivers/misc/mei/hw-me-regs.h
index 7becfc768bbc..9cf8d8f60cfe 100644
--- a/drivers/misc/mei/hw-me-regs.h
+++ b/drivers/misc/mei/hw-me-regs.h
@@ -59,6 +59,7 @@
#define MEI_DEV_ID_SPT 0x9D3A /* Sunrise Point */
#define MEI_DEV_ID_SPT_2 0x9D3B /* Sunrise Point 2 */
+#define MEI_DEV_ID_SPT_3 0x9D3E /* Sunrise Point 3 (iToutch) */
#define MEI_DEV_ID_SPT_H 0xA13A /* Sunrise Point H */
#define MEI_DEV_ID_SPT_H_2 0xA13B /* Sunrise Point H 2 */
@@ -73,6 +74,7 @@
#define MEI_DEV_ID_KBP 0xA2BA /* Kaby Point */
#define MEI_DEV_ID_KBP_2 0xA2BB /* Kaby Point 2 */
+#define MEI_DEV_ID_KBP_3 0xA2BE /* Kaby Point 3 (iTouch) */
#define MEI_DEV_ID_CNP_LP 0x9DE0 /* Cannon Point LP */
#define MEI_DEV_ID_CNP_LP_3 0x9DE4 /* Cannon Point LP 3 (iTouch) */
@@ -106,6 +108,8 @@
/* Host Firmware Status Registers in PCI Config Space */
#define PCI_CFG_HFS_1 0x40
# define PCI_CFG_HFS_1_D0I3_MSK 0x80000000
+# define PCI_CFG_HFS_1_OPMODE_MSK 0xf0000 /* OP MODE Mask: SPS <= 4.0 */
+# define PCI_CFG_HFS_1_OPMODE_SPS 0xf0000 /* SPS SKU : SPS <= 4.0 */
#define PCI_CFG_HFS_2 0x48
#define PCI_CFG_HFS_3 0x60
# define PCI_CFG_HFS_3_FW_SKU_MSK 0x00000070
diff --git a/drivers/misc/mei/hw-me.c b/drivers/misc/mei/hw-me.c
index 7649710a2ab9..cda0829ac589 100644
--- a/drivers/misc/mei/hw-me.c
+++ b/drivers/misc/mei/hw-me.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2003-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -1353,11 +1353,24 @@ static const struct mei_hw_ops mei_me_hw_ops = {
.read = mei_me_read_slots
};
-static bool mei_me_fw_type_nm(struct pci_dev *pdev)
+/**
+ * mei_me_fw_type_nm() - check for nm sku
+ *
+ * Read ME FW Status register to check for the Node Manager (NM) Firmware.
+ * The NM FW is only signaled in PCI function 0.
+ * __Note__: Deprecated by PCH8 and newer.
+ *
+ * @pdev: pci device
+ *
+ * Return: true in case of NM firmware
+ */
+static bool mei_me_fw_type_nm(const struct pci_dev *pdev)
{
u32 reg;
+ unsigned int devfn;
- pci_read_config_dword(pdev, PCI_CFG_HFS_2, &reg);
+ devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
+ pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_2, &reg);
trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_2", PCI_CFG_HFS_2, reg);
/* make sure that bit 9 (NM) is up and bit 10 (DM) is down */
return (reg & 0x600) == 0x200;
@@ -1366,20 +1379,26 @@ static bool mei_me_fw_type_nm(struct pci_dev *pdev)
#define MEI_CFG_FW_NM \
.quirk_probe = mei_me_fw_type_nm
-static bool mei_me_fw_type_sps_4(struct pci_dev *pdev)
+/**
+ * mei_me_fw_sku_sps_4() - check for sps 4.0 sku
+ *
+ * Read ME FW Status register to check for SPS Firmware.
+ * The SPS FW is only signaled in the PCI function 0.
+ * __Note__: Deprecated by SPS 5.0 and newer.
+ *
+ * @pdev: pci device
+ *
+ * Return: true in case of SPS firmware
+ */
+static bool mei_me_fw_type_sps_4(const struct pci_dev *pdev)
{
u32 reg;
unsigned int devfn;
- /*
- * Read ME FW Status register to check for SPS Firmware
- * The SPS FW is only signaled in pci function 0
- */
devfn = PCI_DEVFN(PCI_SLOT(pdev->devfn), 0);
pci_bus_read_config_dword(pdev->bus, devfn, PCI_CFG_HFS_1, &reg);
trace_mei_pci_cfg_read(&pdev->dev, "PCI_CFG_HFS_1", PCI_CFG_HFS_1, reg);
- /* if bits [19:16] = 15, running SPS Firmware */
- return (reg & 0xf0000) == 0xf0000;
+ return (reg & PCI_CFG_HFS_1_OPMODE_MSK) == PCI_CFG_HFS_1_OPMODE_SPS;
}
#define MEI_CFG_FW_SPS_4 \
@@ -1395,7 +1414,7 @@ static bool mei_me_fw_type_sps_4(struct pci_dev *pdev)
*
* Return: true in case of SPS firmware
*/
-static bool mei_me_fw_type_sps(struct pci_dev *pdev)
+static bool mei_me_fw_type_sps(const struct pci_dev *pdev)
{
u32 reg;
u32 fw_type;
@@ -1411,6 +1430,9 @@ static bool mei_me_fw_type_sps(struct pci_dev *pdev)
return fw_type == PCI_CFG_HFS_3_FW_SKU_SPS;
}
+#define MEI_CFG_KIND_ITOUCH \
+ .kind = "itouch"
+
#define MEI_CFG_FW_SPS \
.quirk_probe = mei_me_fw_type_sps
@@ -1480,6 +1502,13 @@ static const struct mei_cfg mei_me_pch8_cfg = {
MEI_CFG_FW_VER_SUPP,
};
+/* PCH8 Lynx Point and newer devices - iTouch */
+static const struct mei_cfg mei_me_pch8_itouch_cfg = {
+ MEI_CFG_KIND_ITOUCH,
+ MEI_CFG_PCH8_HFS,
+ MEI_CFG_FW_VER_SUPP,
+};
+
/* PCH8 Lynx Point with quirk for SPS Firmware exclusion */
static const struct mei_cfg mei_me_pch8_sps_4_cfg = {
MEI_CFG_PCH8_HFS,
@@ -1509,10 +1538,11 @@ static const struct mei_cfg mei_me_pch12_sps_cfg = {
MEI_CFG_FW_SPS,
};
-/* Cannon Lake with quirk for SPS 5.0 and newer Firmware exclusion
- * w/o DMA support
+/* Cannon Lake itouch with quirk for SPS 5.0 and newer Firmware exclusion
+ * w/o DMA support.
*/
-static const struct mei_cfg mei_me_pch12_nodma_sps_cfg = {
+static const struct mei_cfg mei_me_pch12_itouch_sps_cfg = {
+ MEI_CFG_KIND_ITOUCH,
MEI_CFG_PCH8_HFS,
MEI_CFG_FW_VER_SUPP,
MEI_CFG_FW_SPS,
@@ -1547,11 +1577,12 @@ static const struct mei_cfg *const mei_cfg_list[] = {
[MEI_ME_PCH7_CFG] = &mei_me_pch7_cfg,
[MEI_ME_PCH_CPT_PBG_CFG] = &mei_me_pch_cpt_pbg_cfg,
[MEI_ME_PCH8_CFG] = &mei_me_pch8_cfg,
+ [MEI_ME_PCH8_ITOUCH_CFG] = &mei_me_pch8_itouch_cfg,
[MEI_ME_PCH8_SPS_4_CFG] = &mei_me_pch8_sps_4_cfg,
[MEI_ME_PCH12_CFG] = &mei_me_pch12_cfg,
[MEI_ME_PCH12_SPS_4_CFG] = &mei_me_pch12_sps_4_cfg,
[MEI_ME_PCH12_SPS_CFG] = &mei_me_pch12_sps_cfg,
- [MEI_ME_PCH12_SPS_NODMA_CFG] = &mei_me_pch12_nodma_sps_cfg,
+ [MEI_ME_PCH12_SPS_ITOUCH_CFG] = &mei_me_pch12_itouch_sps_cfg,
[MEI_ME_PCH15_CFG] = &mei_me_pch15_cfg,
[MEI_ME_PCH15_SPS_CFG] = &mei_me_pch15_sps_cfg,
};
@@ -1581,8 +1612,7 @@ struct mei_device *mei_me_dev_init(struct device *parent,
struct mei_me_hw *hw;
int i;
- dev = devm_kzalloc(parent, sizeof(struct mei_device) +
- sizeof(struct mei_me_hw), GFP_KERNEL);
+ dev = devm_kzalloc(parent, sizeof(*dev) + sizeof(*hw), GFP_KERNEL);
if (!dev)
return NULL;
@@ -1596,6 +1626,8 @@ struct mei_device *mei_me_dev_init(struct device *parent,
dev->fw_f_fw_ver_supported = cfg->fw_ver_supported;
+ dev->kind = cfg->kind;
+
return dev;
}
diff --git a/drivers/misc/mei/hw-me.h b/drivers/misc/mei/hw-me.h
index 6a8973649c49..00a7132ac7a2 100644
--- a/drivers/misc/mei/hw-me.h
+++ b/drivers/misc/mei/hw-me.h
@@ -19,13 +19,15 @@
*
* @fw_status: FW status
* @quirk_probe: device exclusion quirk
+ * @kind: MEI head kind
* @dma_size: device DMA buffers size
* @fw_ver_supported: is fw version retrievable from FW
* @hw_trc_supported: does the hw support trc register
*/
struct mei_cfg {
const struct mei_fw_status fw_status;
- bool (*quirk_probe)(struct pci_dev *pdev);
+ bool (*quirk_probe)(const struct pci_dev *pdev);
+ const char *kind;
size_t dma_size[DMA_DSCR_NUM];
u32 fw_ver_supported:1;
u32 hw_trc_supported:1;
@@ -76,6 +78,8 @@ struct mei_me_hw {
* with quirk for Node Manager exclusion.
* @MEI_ME_PCH8_CFG: Platform Controller Hub Gen8 and newer
* client platforms.
+ * @MEI_ME_PCH8_ITOUCH_CFG:Platform Controller Hub Gen8 and newer
+ * client platforms (iTouch).
* @MEI_ME_PCH8_SPS_4_CFG: Platform Controller Hub Gen8 and newer
* servers platforms with quirk for
* SPS firmware exclusion.
@@ -100,11 +104,12 @@ enum mei_cfg_idx {
MEI_ME_PCH7_CFG,
MEI_ME_PCH_CPT_PBG_CFG,
MEI_ME_PCH8_CFG,
+ MEI_ME_PCH8_ITOUCH_CFG,
MEI_ME_PCH8_SPS_4_CFG,
MEI_ME_PCH12_CFG,
MEI_ME_PCH12_SPS_4_CFG,
MEI_ME_PCH12_SPS_CFG,
- MEI_ME_PCH12_SPS_NODMA_CFG,
+ MEI_ME_PCH12_SPS_ITOUCH_CFG,
MEI_ME_PCH15_CFG,
MEI_ME_PCH15_SPS_CFG,
MEI_ME_NUM_CFG,
diff --git a/drivers/misc/mei/hw-txe.c b/drivers/misc/mei/hw-txe.c
index 785b260b3ae9..a4e854b9b9e6 100644
--- a/drivers/misc/mei/hw-txe.c
+++ b/drivers/misc/mei/hw-txe.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2013-2019, Intel Corporation. All rights reserved.
+ * Copyright (c) 2013-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -1201,8 +1201,7 @@ struct mei_device *mei_txe_dev_init(struct pci_dev *pdev)
struct mei_device *dev;
struct mei_txe_hw *hw;
- dev = devm_kzalloc(&pdev->dev, sizeof(struct mei_device) +
- sizeof(struct mei_txe_hw), GFP_KERNEL);
+ dev = devm_kzalloc(&pdev->dev, sizeof(*dev) + sizeof(*hw), GFP_KERNEL);
if (!dev)
return NULL;
diff --git a/drivers/misc/mei/hw.h b/drivers/misc/mei/hw.h
index b1a8d5ec88b3..26fa92cb7f7a 100644
--- a/drivers/misc/mei/hw.h
+++ b/drivers/misc/mei/hw.h
@@ -1,6 +1,6 @@
/* SPDX-License-Identifier: GPL-2.0 */
/*
- * Copyright (c) 2003-2018, Intel Corporation. All rights reserved
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -319,7 +319,7 @@ struct hbm_props_response {
u8 hbm_cmd;
u8 me_addr;
u8 status;
- u8 reserved[1];
+ u8 reserved;
struct mei_client_properties client_properties;
} __packed;
@@ -352,7 +352,7 @@ struct hbm_add_client_response {
u8 hbm_cmd;
u8 me_addr;
u8 status;
- u8 reserved[1];
+ u8 reserved;
} __packed;
/**
@@ -461,7 +461,7 @@ struct hbm_notification {
u8 hbm_cmd;
u8 me_addr;
u8 host_addr;
- u8 reserved[1];
+ u8 reserved;
} __packed;
/**
diff --git a/drivers/misc/mei/main.c b/drivers/misc/mei/main.c
index f17297f2943d..86ef5c1a7928 100644
--- a/drivers/misc/mei/main.c
+++ b/drivers/misc/mei/main.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0
/*
- * Copyright (c) 2003-2018, Intel Corporation. All rights reserved.
+ * Copyright (c) 2003-2020, Intel Corporation. All rights reserved.
* Intel Management Engine Interface (Intel MEI) Linux driver
*/
@@ -476,7 +476,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
case IOCTL_MEI_CONNECT_CLIENT:
dev_dbg(dev->dev, ": IOCTL_MEI_CONNECT_CLIENT.\n");
if (copy_from_user(&connect_data, (char __user *)data,
- sizeof(struct mei_connect_client_data))) {
+ sizeof(connect_data))) {
dev_dbg(dev->dev, "failed to copy data from userland\n");
rets = -EFAULT;
goto out;
@@ -488,7 +488,7 @@ static long mei_ioctl(struct file *file, unsigned int cmd, unsigned long data)
/* if all is ok, copying the data back to user. */
if (copy_to_user((char __user *)data, &connect_data,
- sizeof(struct mei_connect_client_data))) {
+ sizeof(connect_data))) {
dev_dbg(dev->dev, "failed to copy data to userland\n");
rets = -EFAULT;
goto out;
@@ -885,6 +885,30 @@ void mei_set_devstate(struct mei_device *dev, enum mei_dev_state state)
}
}
+/**
+ * kind_show - display device kind
+ *
+ * @device: device pointer
+ * @attr: attribute pointer
+ * @buf: char out buffer
+ *
+ * Return: number of the bytes printed into buf or error
+ */
+static ssize_t kind_show(struct device *device,
+ struct device_attribute *attr, char *buf)
+{
+ struct mei_device *dev = dev_get_drvdata(device);
+ ssize_t ret;
+
+ if (dev->kind)
+ ret = sprintf(buf, "%s\n", dev->kind);
+ else
+ ret = sprintf(buf, "%s\n", "mei");
+
+ return ret;
+}
+static DEVICE_ATTR_RO(kind);
+
static struct attribute *mei_attrs[] = {
&dev_attr_fw_status.attr,
&dev_attr_hbm_ver.attr,
@@ -893,6 +917,7 @@ static struct attribute *mei_attrs[] = {
&dev_attr_fw_ver.attr,
&dev_attr_dev_state.attr,
&dev_attr_trc.attr,
+ &dev_attr_kind.attr,
NULL
};
ATTRIBUTE_GROUPS(mei);
diff --git a/drivers/misc/mei/mei_dev.h b/drivers/misc/mei/mei_dev.h
index 3a29db07211d..d3a4f54c0ae7 100644
--- a/drivers/misc/mei/mei_dev.h
+++ b/drivers/misc/mei/mei_dev.h
@@ -445,6 +445,8 @@ struct mei_fw_version {
* @device_list : mei client bus list
* @cl_bus_lock : client bus list lock
*
+ * @kind : kind of mei device
+ *
* @dbgfs_dir : debugfs mei root directory
*
* @ops: : hw specific operations
@@ -528,6 +530,8 @@ struct mei_device {
struct list_head device_list;
struct mutex cl_bus_lock;
+ const char *kind;
+
#if IS_ENABLED(CONFIG_DEBUG_FS)
struct dentry *dbgfs_dir;
#endif /* CONFIG_DEBUG_FS */
diff --git a/drivers/misc/mei/pci-me.c b/drivers/misc/mei/pci-me.c
index 2a3f2fd5df50..1de9ef7a272b 100644
--- a/drivers/misc/mei/pci-me.c
+++ b/drivers/misc/mei/pci-me.c
@@ -68,6 +68,7 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_2, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_SPT_3, MEI_ME_PCH8_ITOUCH_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H, MEI_ME_PCH8_SPS_4_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_SPT_H_2, MEI_ME_PCH8_SPS_4_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_LBG, MEI_ME_PCH12_SPS_4_CFG)},
@@ -81,17 +82,18 @@ static const struct pci_device_id mei_me_pci_tbl[] = {
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_KBP_2, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_KBP_3, MEI_ME_PCH8_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP, MEI_ME_PCH12_CFG)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_3, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_LP_3, MEI_ME_PCH8_ITOUCH_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H, MEI_ME_PCH12_SPS_CFG)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH12_SPS_NODMA_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CNP_H_3, MEI_ME_PCH12_SPS_ITOUCH_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP, MEI_ME_PCH12_CFG)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_LP_3, MEI_ME_PCH8_ITOUCH_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_V, MEI_ME_PCH12_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H, MEI_ME_PCH12_CFG)},
- {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_CFG)},
+ {MEI_PCI_DEVICE(MEI_DEV_ID_CMP_H_3, MEI_ME_PCH8_ITOUCH_CFG)},
{MEI_PCI_DEVICE(MEI_DEV_ID_ICP_LP, MEI_ME_PCH12_CFG)},
diff --git a/drivers/misc/mic/card/mic_debugfs.c b/drivers/misc/mic/card/mic_debugfs.c
index b58608829b18..4c326e8f4d99 100644
--- a/drivers/misc/mic/card/mic_debugfs.c
+++ b/drivers/misc/mic/card/mic_debugfs.c
@@ -24,7 +24,7 @@
/* Debugfs parent dir */
static struct dentry *mic_dbg;
-/**
+/*
* mic_intr_show - Send interrupts to host.
*/
static int mic_intr_show(struct seq_file *s, void *unused)
@@ -46,7 +46,7 @@ static int mic_intr_show(struct seq_file *s, void *unused)
DEFINE_SHOW_ATTRIBUTE(mic_intr);
-/**
+/*
* mic_create_card_debug_dir - Initialize MIC debugfs entries.
*/
void __init mic_create_card_debug_dir(struct mic_driver *mdrv)
@@ -60,7 +60,7 @@ void __init mic_create_card_debug_dir(struct mic_driver *mdrv)
&mic_intr_fops);
}
-/**
+/*
* mic_delete_card_debug_dir - Uninitialize MIC debugfs entries.
*/
void mic_delete_card_debug_dir(struct mic_driver *mdrv)
@@ -68,7 +68,7 @@ void mic_delete_card_debug_dir(struct mic_driver *mdrv)
debugfs_remove_recursive(mdrv->dbg_dir);
}
-/**
+/*
* mic_init_card_debugfs - Initialize global debugfs entry.
*/
void __init mic_init_card_debugfs(void)
@@ -76,7 +76,7 @@ void __init mic_init_card_debugfs(void)
mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
}
-/**
+/*
* mic_exit_card_debugfs - Uninitialize global debugfs entry
*/
void mic_exit_card_debugfs(void)
diff --git a/drivers/misc/mic/cosm/cosm_debugfs.c b/drivers/misc/mic/cosm/cosm_debugfs.c
index 68a731fd86de..cb55653cf1f9 100644
--- a/drivers/misc/mic/cosm/cosm_debugfs.c
+++ b/drivers/misc/mic/cosm/cosm_debugfs.c
@@ -15,7 +15,7 @@
/* Debugfs parent dir */
static struct dentry *cosm_dbg;
-/**
+/*
* log_buf_show - Display MIC kernel log buffer
*
* log_buf addr/len is read from System.map by user space
@@ -68,7 +68,7 @@ done:
DEFINE_SHOW_ATTRIBUTE(log_buf);
-/**
+/*
* force_reset_show - Force MIC reset
*
* Invokes the force_reset COSM bus op instead of the standard reset
diff --git a/drivers/misc/mic/cosm/cosm_main.c b/drivers/misc/mic/cosm/cosm_main.c
index f9133c4f6105..ebb0eac43754 100644
--- a/drivers/misc/mic/cosm/cosm_main.c
+++ b/drivers/misc/mic/cosm/cosm_main.c
@@ -26,6 +26,7 @@ static atomic_t g_num_dev;
/**
* cosm_hw_reset - Issue a HW reset for the MIC device
* @cdev: pointer to cosm_device instance
+ * @force: force a MIC to reset even if it is already reset and ready
*/
static void cosm_hw_reset(struct cosm_device *cdev, bool force)
{
diff --git a/drivers/misc/mic/host/mic_debugfs.c b/drivers/misc/mic/host/mic_debugfs.c
index ab0db7a2ac8c..ffda740e20d5 100644
--- a/drivers/misc/mic/host/mic_debugfs.c
+++ b/drivers/misc/mic/host/mic_debugfs.c
@@ -101,7 +101,7 @@ static int mic_msi_irq_info_show(struct seq_file *s, void *pos)
DEFINE_SHOW_ATTRIBUTE(mic_msi_irq_info);
-/**
+/*
* mic_create_debug_dir - Initialize MIC debugfs entries.
*/
void mic_create_debug_dir(struct mic_device *mdev)
@@ -124,7 +124,7 @@ void mic_create_debug_dir(struct mic_device *mdev)
&mic_msi_irq_info_fops);
}
-/**
+/*
* mic_delete_debug_dir - Uninitialize MIC debugfs entries.
*/
void mic_delete_debug_dir(struct mic_device *mdev)
@@ -132,7 +132,7 @@ void mic_delete_debug_dir(struct mic_device *mdev)
debugfs_remove_recursive(mdev->dbg_dir);
}
-/**
+/*
* mic_init_debugfs - Initialize global debugfs entry.
*/
void __init mic_init_debugfs(void)
@@ -140,7 +140,7 @@ void __init mic_init_debugfs(void)
mic_dbg = debugfs_create_dir(KBUILD_MODNAME, NULL);
}
-/**
+/*
* mic_exit_debugfs - Uninitialize global debugfs entry
*/
void mic_exit_debugfs(void)
diff --git a/drivers/misc/mic/host/mic_intr.c b/drivers/misc/mic/host/mic_intr.c
index 433d35dc1721..85b3221b5d40 100644
--- a/drivers/misc/mic/host/mic_intr.c
+++ b/drivers/misc/mic/host/mic_intr.c
@@ -37,6 +37,8 @@ static irqreturn_t mic_thread_fn(int irq, void *dev)
/**
* mic_interrupt - Generic interrupt handler for
* MSI and INTx based interrupts.
+ * @irq: interrupt to handle (unused)
+ * @dev: pointer to the mic_device instance
*/
static irqreturn_t mic_interrupt(int irq, void *dev)
{
@@ -180,7 +182,7 @@ static u8 mic_unregister_intr_callback(struct mic_device *mdev, u32 idx)
* mic_setup_msix - Initializes MSIx interrupts.
*
* @mdev: pointer to mic_device instance
- *
+ * @pdev: PCI device structure
*
* RETURNS: An appropriate -ERRNO error value on error, or zero for success.
*/
diff --git a/drivers/misc/mic/host/mic_main.c b/drivers/misc/mic/host/mic_main.c
index be0784fd1635..ea4608527ea0 100644
--- a/drivers/misc/mic/host/mic_main.c
+++ b/drivers/misc/mic/host/mic_main.c
@@ -164,7 +164,6 @@ static int mic_probe(struct pci_dev *pdev,
mdev = kzalloc(sizeof(*mdev), GFP_KERNEL);
if (!mdev) {
rc = -ENOMEM;
- dev_err(&pdev->dev, "mdev kmalloc failed rc %d\n", rc);
goto mdev_alloc_fail;
}
mdev->id = ida_simple_get(&g_mic_ida, 0, MIC_MAX_NUM_DEVS, GFP_KERNEL);
diff --git a/drivers/misc/mic/host/mic_x100.c b/drivers/misc/mic/host/mic_x100.c
index d18cda966912..f5536c1ad607 100644
--- a/drivers/misc/mic/host/mic_x100.c
+++ b/drivers/misc/mic/host/mic_x100.c
@@ -17,6 +17,15 @@
#include "mic_x100.h"
#include "mic_smpt.h"
+static const u16 mic_x100_intr_init[] = {
+ MIC_X100_DOORBELL_IDX_START,
+ MIC_X100_DMA_IDX_START,
+ MIC_X100_ERR_IDX_START,
+ MIC_X100_NUM_DOORBELL,
+ MIC_X100_NUM_DMA,
+ MIC_X100_NUM_ERR,
+};
+
/**
* mic_x100_write_spad - write to the scratchpad register
* @mdev: pointer to mic_device instance
@@ -112,6 +121,7 @@ static void mic_x100_disable_interrupts(struct mic_device *mdev)
/**
* mic_x100_send_sbox_intr - Send an MIC_X100_SBOX interrupt to MIC.
* @mdev: pointer to mic_device instance
+ * @doorbell: doorbell number
*/
static void mic_x100_send_sbox_intr(struct mic_device *mdev,
int doorbell)
@@ -133,6 +143,7 @@ static void mic_x100_send_sbox_intr(struct mic_device *mdev,
/**
* mic_x100_send_rdmasr_intr - Send an RDMASR interrupt to MIC.
* @mdev: pointer to mic_device instance
+ * @doorbell: doorbell number
*/
static void mic_x100_send_rdmasr_intr(struct mic_device *mdev,
int doorbell)
@@ -494,6 +505,8 @@ static u32 mic_x100_get_postcode(struct mic_device *mdev)
/**
* mic_x100_smpt_set - Update an SMPT entry with a DMA address.
* @mdev: pointer to mic_device instance
+ * @dma_addr: DMA address to use
+ * @index: entry to write to
*
* RETURNS: none.
*/
diff --git a/drivers/misc/mic/host/mic_x100.h b/drivers/misc/mic/host/mic_x100.h
index 1f727a6f609c..aebcaed6fa72 100644
--- a/drivers/misc/mic/host/mic_x100.h
+++ b/drivers/misc/mic/host/mic_x100.h
@@ -67,15 +67,6 @@
#define MIC_X100_FW_SIZE 5
#define MIC_X100_POSTCODE 0x242c
-static const u16 mic_x100_intr_init[] = {
- MIC_X100_DOORBELL_IDX_START,
- MIC_X100_DMA_IDX_START,
- MIC_X100_ERR_IDX_START,
- MIC_X100_NUM_DOORBELL,
- MIC_X100_NUM_DMA,
- MIC_X100_NUM_ERR,
-};
-
/* Host->Card(bootstrap) Interrupt Vector */
#define MIC_X100_BSP_INTERRUPT_VECTOR 229
diff --git a/drivers/misc/mic/scif/scif_api.c b/drivers/misc/mic/scif/scif_api.c
index 781217c030a6..9cc6b2a6cf22 100644
--- a/drivers/misc/mic/scif/scif_api.c
+++ b/drivers/misc/mic/scif/scif_api.c
@@ -713,7 +713,7 @@ int scif_connect(scif_epd_t epd, struct scif_port_id *dst)
}
EXPORT_SYMBOL_GPL(scif_connect);
-/**
+/*
* scif_accept() - Accept a connection request from the remote node
*
* The function accepts a connection request from the remote node. Successful
@@ -997,7 +997,6 @@ static int _scif_send(scif_epd_t epd, void *msg, int len, int flags)
static int _scif_recv(scif_epd_t epd, void *msg, int len, int flags)
{
- int read_size;
struct scif_endpt *ep = (struct scif_endpt *)epd;
struct scifmsg notif_msg;
int curr_recv_len = 0, remaining_len = len, read_count;
@@ -1017,8 +1016,7 @@ static int _scif_recv(scif_epd_t epd, void *msg, int len, int flags)
* important for the Non Blocking case.
*/
curr_recv_len = min(remaining_len, read_count);
- read_size = scif_rb_get_next(&qp->inbound_q,
- msg, curr_recv_len);
+ scif_rb_get_next(&qp->inbound_q, msg, curr_recv_len);
if (ep->state == SCIFEP_CONNECTED) {
/*
* Update the read pointer only if the endpoint
diff --git a/drivers/misc/mic/scif/scif_dma.c b/drivers/misc/mic/scif/scif_dma.c
index c7c873409184..401b98e5ad79 100644
--- a/drivers/misc/mic/scif/scif_dma.c
+++ b/drivers/misc/mic/scif/scif_dma.c
@@ -99,7 +99,7 @@ int scif_reserve_dma_chan(struct scif_endpt *ep)
}
#ifdef CONFIG_MMU_NOTIFIER
-/**
+/*
* scif_rma_destroy_tcw:
*
* This routine destroys temporary cached windows
@@ -332,6 +332,7 @@ static bool scif_rma_tc_can_cache(struct scif_endpt *ep, size_t cur_bytes)
* @epd: End Point Descriptor.
* @addr: virtual address to/from which to copy
* @len: length of range to copy
+ * @prot: read/write protection
* @out_offset: computed offset returned by reference.
* @out_window: allocated registered window returned by reference.
*
diff --git a/drivers/misc/mic/scif/scif_epd.c b/drivers/misc/mic/scif/scif_epd.c
index 590baca9dc7b..426687f6696b 100644
--- a/drivers/misc/mic/scif/scif_epd.c
+++ b/drivers/misc/mic/scif/scif_epd.c
@@ -104,6 +104,7 @@ void scif_cleanup_zombie_epd(void)
/**
* scif_cnctreq() - Respond to SCIF_CNCT_REQ interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* This message is initiated by the remote node to request a connection
@@ -155,6 +156,7 @@ conreq_sendrej:
/**
* scif_cnctgnt() - Respond to SCIF_CNCT_GNT interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* An accept() on the remote node has occurred and sent this message
@@ -181,6 +183,7 @@ void scif_cnctgnt(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_cnctgnt_ack() - Respond to SCIF_CNCT_GNTACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The remote connection request has finished mapping the local memory.
@@ -203,6 +206,7 @@ void scif_cnctgnt_ack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_cnctgnt_nack() - Respond to SCIF_CNCT_GNTNACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The remote connection request failed to map the local memory it was sent.
@@ -221,6 +225,7 @@ void scif_cnctgnt_nack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_cnctrej() - Respond to SCIF_CNCT_REJ interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The remote end has rejected the connection request. Set the end
@@ -240,6 +245,7 @@ void scif_cnctrej(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_discnct() - Respond to SCIF_DISCNCT interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The remote node has indicated close() has been called on its end
@@ -301,6 +307,7 @@ discnct_ack:
/**
* scif_discnct_ack() - Respond to SCIF_DISCNT_ACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remote side has indicated it has not more references to local resources
@@ -317,6 +324,7 @@ void scif_discnt_ack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_clientsend() - Respond to SCIF_CLIENT_SEND interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remote side is confirming send or receive interrupt handling is complete.
@@ -333,6 +341,7 @@ void scif_clientsend(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_clientrcvd() - Respond to SCIF_CLIENT_RCVD interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remote side is confirming send or receive interrupt handling is complete.
diff --git a/drivers/misc/mic/scif/scif_fence.c b/drivers/misc/mic/scif/scif_fence.c
index 657fd4a20656..4fedf6183951 100644
--- a/drivers/misc/mic/scif/scif_fence.c
+++ b/drivers/misc/mic/scif/scif_fence.c
@@ -11,6 +11,7 @@
/**
* scif_recv_mark: Handle SCIF_MARK request
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has requested a mark.
@@ -33,6 +34,7 @@ void scif_recv_mark(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_mark_resp: Handle SCIF_MARK_(N)ACK messages.
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has responded to a SCIF_MARK message.
@@ -56,6 +58,7 @@ void scif_recv_mark_resp(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_wait: Handle SCIF_WAIT request
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has requested waiting on a fence.
@@ -93,6 +96,7 @@ void scif_recv_wait(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_wait_resp: Handle SCIF_WAIT_(N)ACK messages.
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has responded to a SCIF_WAIT message.
@@ -114,6 +118,7 @@ void scif_recv_wait_resp(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_sig_local: Handle SCIF_SIG_LOCAL request
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has requested a signal on a local offset.
@@ -135,6 +140,7 @@ void scif_recv_sig_local(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_sig_remote: Handle SCIF_SIGNAL_REMOTE request
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has requested a signal on a remote offset.
@@ -156,6 +162,7 @@ void scif_recv_sig_remote(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_sig_resp: Handle SCIF_SIG_(N)ACK messages.
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* The peer has responded to a signal request.
@@ -280,12 +287,12 @@ alloc_fail:
return err;
}
-/*
+/**
* scif_prog_signal:
- * @epd - Endpoint Descriptor
- * @offset - registered address to write @val to
- * @val - Value to be written at @offset
- * @type - Type of the window.
+ * @epd: Endpoint Descriptor
+ * @offset: registered address to write @val to
+ * @val: Value to be written at @offset
+ * @type: Type of the window.
*
* Arrange to write a value to the registered offset after ensuring that the
* offset provided is indeed valid.
@@ -501,12 +508,12 @@ retry:
/**
* scif_send_fence_signal:
- * @epd - endpoint descriptor
- * @loff - local offset
- * @lval - local value to write to loffset
- * @roff - remote offset
- * @rval - remote value to write to roffset
- * @flags - flags
+ * @epd: endpoint descriptor
+ * @loff: local offset
+ * @lval: local value to write to loffset
+ * @roff: remote offset
+ * @rval: remote value to write to roffset
+ * @flags: flags
*
* Sends a remote fence signal request
*/
@@ -577,10 +584,11 @@ static void scif_fence_mark_cb(void *arg)
atomic_dec(&ep->rma_info.fence_refcount);
}
-/*
+/**
* _scif_fence_mark:
+ * @epd: endpoint descriptor
+ * @mark: DMA mark to set-up
*
- * @epd - endpoint descriptor
* Set up a mark for this endpoint and return the value of the mark.
*/
int _scif_fence_mark(scif_epd_t epd, int *mark)
diff --git a/drivers/misc/mic/scif/scif_nm.c b/drivers/misc/mic/scif/scif_nm.c
index c537df84539a..c4d9422082b7 100644
--- a/drivers/misc/mic/scif/scif_nm.c
+++ b/drivers/misc/mic/scif/scif_nm.c
@@ -14,6 +14,8 @@
/**
* scif_invalidate_ep() - Set state for all connected endpoints
* to disconnected and wake up all send/recv waitqueues
+ *
+ * @node: Node to invalidate
*/
static void scif_invalidate_ep(int node)
{
@@ -99,11 +101,10 @@ void scif_send_acks(struct scif_dev *dev)
}
}
-/*
- * scif_cleanup_scifdev
- *
+/**
+ * scif_cleanup_scifdev - Uninitialize SCIF data structures for remote
+ * SCIF device.
* @dev: Remote SCIF device.
- * Uninitialize SCIF data structures for remote SCIF device.
*/
void scif_cleanup_scifdev(struct scif_dev *dev)
{
@@ -136,8 +137,8 @@ void scif_cleanup_scifdev(struct scif_dev *dev)
scif_cleanup_qp(dev);
}
-/*
- * scif_remove_node:
+/**
+ * scif_remove_node
*
* @node: Node to remove
*/
@@ -162,9 +163,9 @@ static int scif_send_rmnode_msg(int node, int remove_node)
}
/**
- * scif_node_disconnect:
+ * scif_node_disconnect
*
- * @node_id[in]: source node id.
+ * @node_id: source node id [in]
* @mgmt_initiated: Disconnection initiated from the mgmt node
*
* Disconnect a node from the scif network.
diff --git a/drivers/misc/mic/scif/scif_nodeqp.c b/drivers/misc/mic/scif/scif_nodeqp.c
index ea084626fe11..e0748be373f1 100644
--- a/drivers/misc/mic/scif/scif_nodeqp.c
+++ b/drivers/misc/mic/scif/scif_nodeqp.c
@@ -443,6 +443,7 @@ static void scif_deinit_p2p_info(struct scif_dev *scifdev,
/**
* scif_node_connect: Respond to SCIF_NODE_CONNECT interrupt message
+ * @scifdev: SCIF device
* @dst: Destination node
*
* Connect the src and dst node by setting up the p2p connection
@@ -719,7 +720,7 @@ scif_init(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_exit() - Respond to SCIF_EXIT interrupt message
* @scifdev: Remote SCIF device node
- * @msg: Interrupt message
+ * @unused: Interrupt message (unused)
*
* This function stops the SCIF interface for the node which sent
* the SCIF_EXIT message and starts waiting for that node to
@@ -740,7 +741,7 @@ scif_exit(struct scif_dev *scifdev, struct scifmsg *unused)
/**
* scif_exitack() - Respond to SCIF_EXIT_ACK interrupt message
* @scifdev: Remote SCIF device node
- * @msg: Interrupt message
+ * @unused: Interrupt message (unused)
*
*/
static __always_inline void
@@ -930,6 +931,7 @@ local_error:
/**
* scif_node_add_nack: Respond to SCIF_NODE_ADD_NACK interrupt message
+ * @scifdev: Remote SCIF device node
* @msg: Interrupt message
*
* SCIF_NODE_ADD failed, so inform the waiting wq.
@@ -946,8 +948,9 @@ scif_node_add_nack(struct scif_dev *scifdev, struct scifmsg *msg)
}
}
-/*
+/**
* scif_node_remove: Handle SCIF_NODE_REMOVE message
+ * @scifdev: Remote SCIF device node
* @msg: Interrupt message
*
* Handle node removal.
@@ -962,8 +965,9 @@ scif_node_remove(struct scif_dev *scifdev, struct scifmsg *msg)
scif_handle_remove_node(node);
}
-/*
+/**
* scif_node_remove_ack: Handle SCIF_NODE_REMOVE_ACK message
+ * @scifdev: Remote SCIF device node
* @msg: Interrupt message
*
* The peer has acked a SCIF_NODE_REMOVE message.
@@ -979,6 +983,7 @@ scif_node_remove_ack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_get_node_info: Respond to SCIF_GET_NODE_INFO interrupt message
+ * @scifdev: Remote SCIF device node
* @msg: Interrupt message
*
* Retrieve node info i.e maxid and total from the mgmt node.
@@ -1058,6 +1063,7 @@ static void (*scif_intr_func[SCIF_MAX_MSG + 1])
scif_recv_sig_resp, /* SCIF_SIG_NACK */
};
+static int scif_max_msg_id = SCIF_MAX_MSG;
/**
* scif_nodeqp_msg_handler() - Common handler for node messages
* @scifdev: Remote device to respond to
@@ -1067,8 +1073,6 @@ static void (*scif_intr_func[SCIF_MAX_MSG + 1])
* This routine calls the appropriate routine to handle a Node Qp
* message receipt
*/
-static int scif_max_msg_id = SCIF_MAX_MSG;
-
static void
scif_nodeqp_msg_handler(struct scif_dev *scifdev,
struct scif_qp *qp, struct scifmsg *msg)
@@ -1117,7 +1121,7 @@ void scif_nodeqp_intrhandler(struct scif_dev *scifdev, struct scif_qp *qp)
/**
* scif_loopb_wq_handler - Loopback Workqueue Handler.
- * @work: loop back work
+ * @unused: loop back work (unused)
*
* This work queue routine is invoked by the loopback work queue handler.
* It grabs the recv lock, dequeues any available messages from the head
diff --git a/drivers/misc/mic/scif/scif_ports.c b/drivers/misc/mic/scif/scif_ports.c
index 547a71285069..4bdb5ef9a139 100644
--- a/drivers/misc/mic/scif/scif_ports.c
+++ b/drivers/misc/mic/scif/scif_ports.c
@@ -14,11 +14,11 @@
struct idr scif_ports;
-/*
+/**
* struct scif_port - SCIF port information
*
- * @ref_cnt - Reference count since there can be multiple endpoints
- * created via scif_accept(..) simultaneously using a port.
+ * @ref_cnt: Reference count since there can be multiple endpoints
+ * created via scif_accept(..) simultaneously using a port.
*/
struct scif_port {
int ref_cnt;
@@ -27,7 +27,8 @@ struct scif_port {
/**
* __scif_get_port - Reserve a specified port # for SCIF and add it
* to the global list.
- * @port : port # to be reserved.
+ * @start: lowest port # to be reserved (inclusive).
+ * @end: highest port # to be reserved (exclusive).
*
* @return : Allocated SCIF port #, or -ENOSPC if port unavailable.
* On memory allocation failure, returns -ENOMEM.
diff --git a/drivers/misc/mic/scif/scif_rma.c b/drivers/misc/mic/scif/scif_rma.c
index 406cd5abfa72..de8f61efaef5 100644
--- a/drivers/misc/mic/scif/scif_rma.c
+++ b/drivers/misc/mic/scif/scif_rma.c
@@ -458,7 +458,7 @@ static void scif_destroy_remote_lookup(struct scif_dev *remote_dev,
/**
* scif_create_remote_window:
- * @ep: end point
+ * @scifdev: SCIF device
* @nr_pages: number of pages in window
*
* Allocate and prepare a remote registration window.
@@ -500,7 +500,6 @@ error_ret:
/**
* scif_destroy_remote_window:
- * @ep: end point
* @window: remote registration window
*
* Deallocate resources for remote window.
@@ -1037,6 +1036,7 @@ void scif_free_window_offset(struct scif_endpt *ep,
/**
* scif_alloc_req: Respond to SCIF_ALLOC_REQ interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remote side is requesting a memory allocation.
@@ -1072,6 +1072,7 @@ error:
/**
* scif_alloc_gnt_rej: Respond to SCIF_ALLOC_GNT/REJ interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remote side responded to a memory allocation.
@@ -1096,6 +1097,7 @@ void scif_alloc_gnt_rej(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_free_virt: Respond to SCIF_FREE_VIRT interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Free up memory kmalloc'd earlier.
@@ -1134,6 +1136,7 @@ scif_fixup_aper_base(struct scif_dev *dev, struct scif_window *window)
/**
* scif_recv_reg: Respond to SCIF_REGISTER interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Update remote window list with a new registered window.
@@ -1170,6 +1173,7 @@ void scif_recv_reg(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_unreg: Respond to SCIF_UNREGISTER interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Remove window from remote registration list;
@@ -1235,6 +1239,7 @@ error:
/**
* scif_recv_reg_ack: Respond to SCIF_REGISTER_ACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Wake up the window waiting to complete registration.
@@ -1253,6 +1258,7 @@ void scif_recv_reg_ack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_reg_nack: Respond to SCIF_REGISTER_NACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Wake up the window waiting to inform it that registration
@@ -1272,6 +1278,7 @@ void scif_recv_reg_nack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_unreg_ack: Respond to SCIF_UNREGISTER_ACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Wake up the window waiting to complete unregistration.
@@ -1290,6 +1297,7 @@ void scif_recv_unreg_ack(struct scif_dev *scifdev, struct scifmsg *msg)
/**
* scif_recv_unreg_nack: Respond to SCIF_UNREGISTER_NACK interrupt message
+ * @scifdev: SCIF device
* @msg: Interrupt message
*
* Wake up the window waiting to inform it that unregistration
diff --git a/drivers/misc/mic/vop/vop_main.c b/drivers/misc/mic/vop/vop_main.c
index 85942f6717c5..55e7f21e51f4 100644
--- a/drivers/misc/mic/vop/vop_main.c
+++ b/drivers/misc/mic/vop/vop_main.c
@@ -438,7 +438,7 @@ error:
/*
* The config ops structure as defined by virtio config
*/
-static struct virtio_config_ops vop_vq_config_ops = {
+static const struct virtio_config_ops vop_vq_config_ops = {
.get_features = vop_get_features,
.finalize_features = vop_finalize_features,
.get = vop_get,
@@ -546,7 +546,7 @@ static int vop_match_desc(struct device *dev, void *data)
return vdev->desc == (void __iomem *)data;
}
-static struct _vop_vdev *vop_dc_to_vdev(struct mic_device_ctrl *dc)
+static struct _vop_vdev *vop_dc_to_vdev(struct mic_device_ctrl __iomem *dc)
{
return (struct _vop_vdev *)(unsigned long)readq(&dc->vdev);
}
@@ -614,7 +614,6 @@ static void _vop_scan_devices(void __iomem *dp, struct vop_device *vpdev,
struct mic_device_desc __iomem *d;
struct mic_device_ctrl __iomem *dc;
struct device *dev;
- int ret;
for (i = sizeof(struct mic_bootparam);
i < MIC_DP_SIZE; i += _vop_total_desc_size(d)) {
@@ -644,7 +643,7 @@ static void _vop_scan_devices(void __iomem *dp, struct vop_device *vpdev,
&dc->config_change);
put_device(dev);
_vop_handle_config_change(d, i, vpdev);
- ret = _vop_remove_device(d, i, vpdev);
+ _vop_remove_device(d, i, vpdev);
if (remove) {
iowrite8(0, &dc->config_change);
iowrite8(0, &dc->guest_ack);
@@ -763,7 +762,7 @@ static void vop_driver_remove(struct vop_device *vpdev)
kfree(vi);
}
-static struct vop_device_id id_table[] = {
+static const struct vop_device_id id_table[] = {
{ VOP_DEV_TRNSP, VOP_DEV_ANY_ID },
{ 0 },
};
diff --git a/drivers/misc/ocxl/config.c b/drivers/misc/ocxl/config.c
index c8e19bfb5ef9..e3b99a39d207 100644
--- a/drivers/misc/ocxl/config.c
+++ b/drivers/misc/ocxl/config.c
@@ -273,11 +273,11 @@ static int read_afu_info(struct pci_dev *dev, struct ocxl_fn_config *fn,
}
/**
- * Read the template version from the AFU
- * dev: the device for the AFU
- * fn: the AFU offsets
- * len: outputs the template length
- * version: outputs the major<<8,minor version
+ * read_template_version - Read the template version from the AFU
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @len: outputs the template length
+ * @version: outputs the major<<8,minor version
*
* Returns 0 on success, negative on failure
*/
@@ -476,10 +476,10 @@ static int validate_afu(struct pci_dev *dev, struct ocxl_afu_config *afu)
}
/**
- * Populate AFU metadata regarding LPC memory
- * dev: the device for the AFU
- * fn: the AFU offsets
- * afu: the AFU struct to populate the LPC metadata into
+ * read_afu_lpc_memory_info - Populate AFU metadata regarding LPC memory
+ * @dev: the device for the AFU
+ * @fn: the AFU offsets
+ * @afu: the AFU struct to populate the LPC metadata into
*
* Returns 0 on success, negative on failure
*/
diff --git a/drivers/misc/pch_phub.c b/drivers/misc/pch_phub.c
index 60828af7506a..8d2b7135738e 100644
--- a/drivers/misc/pch_phub.c
+++ b/drivers/misc/pch_phub.c
@@ -135,6 +135,7 @@ static DEFINE_MUTEX(pch_phub_mutex);
/**
* pch_phub_read_modify_write_reg() - Reading modifying and writing register
+ * @chip: Pointer to the PHUB register structure
* @reg_addr_offset: Register offset address value.
* @data: Writing value.
* @mask: Mask value.
@@ -147,9 +148,8 @@ static void pch_phub_read_modify_write_reg(struct pch_phub_reg *chip,
iowrite32(((ioread32(reg_addr) & ~mask)) | data, reg_addr);
}
-#ifdef CONFIG_PM
/* pch_phub_save_reg_conf - saves register configuration */
-static void pch_phub_save_reg_conf(struct pci_dev *pdev)
+static void __maybe_unused pch_phub_save_reg_conf(struct pci_dev *pdev)
{
unsigned int i;
struct pch_phub_reg *chip = pci_get_drvdata(pdev);
@@ -210,7 +210,7 @@ static void pch_phub_save_reg_conf(struct pci_dev *pdev)
}
/* pch_phub_restore_reg_conf - restore register configuration */
-static void pch_phub_restore_reg_conf(struct pci_dev *pdev)
+static void __maybe_unused pch_phub_restore_reg_conf(struct pci_dev *pdev)
{
unsigned int i;
struct pch_phub_reg *chip = pci_get_drvdata(pdev);
@@ -270,10 +270,10 @@ static void pch_phub_restore_reg_conf(struct pci_dev *pdev)
if ((chip->ioh_type == 2) || (chip->ioh_type == 4))
iowrite32(chip->funcsel_reg, p + FUNCSEL_REG_OFFSET);
}
-#endif
/**
* pch_phub_read_serial_rom() - Reading Serial ROM
+ * @chip: Pointer to the PHUB register structure
* @offset_address: Serial ROM offset address to read.
* @data: Read buffer for specified Serial ROM value.
*/
@@ -288,6 +288,7 @@ static void pch_phub_read_serial_rom(struct pch_phub_reg *chip,
/**
* pch_phub_write_serial_rom() - Writing Serial ROM
+ * @chip: Pointer to the PHUB register structure
* @offset_address: Serial ROM offset address.
* @data: Serial ROM value to write.
*/
@@ -326,6 +327,7 @@ static int pch_phub_write_serial_rom(struct pch_phub_reg *chip,
/**
* pch_phub_read_serial_rom_val() - Read Serial ROM value
+ * @chip: Pointer to the PHUB register structure
* @offset_address: Serial ROM address offset value.
* @data: Serial ROM value to read.
*/
@@ -342,6 +344,7 @@ static void pch_phub_read_serial_rom_val(struct pch_phub_reg *chip,
/**
* pch_phub_write_serial_rom_val() - writing Serial ROM value
+ * @chip: Pointer to the PHUB register structure
* @offset_address: Serial ROM address offset value.
* @data: Serial ROM value.
*/
@@ -443,7 +446,7 @@ static int pch_phub_gbe_serial_rom_conf_mp(struct pch_phub_reg *chip)
/**
* pch_phub_read_gbe_mac_addr() - Read Gigabit Ethernet MAC address
- * @offset_address: Gigabit Ethernet MAC address offset value.
+ * @chip: Pointer to the PHUB register structure
* @data: Buffer of the Gigabit Ethernet MAC address value.
*/
static void pch_phub_read_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
@@ -455,7 +458,7 @@ static void pch_phub_read_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
/**
* pch_phub_write_gbe_mac_addr() - Write MAC address
- * @offset_address: Gigabit Ethernet MAC address offset value.
+ * @chip: Pointer to the PHUB register structure
* @data: Gigabit Ethernet MAC address value.
*/
static int pch_phub_write_gbe_mac_addr(struct pch_phub_reg *chip, u8 *data)
@@ -835,48 +838,19 @@ static void pch_phub_remove(struct pci_dev *pdev)
kfree(chip);
}
-#ifdef CONFIG_PM
-
-static int pch_phub_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused pch_phub_suspend(struct device *dev_d)
{
- int ret;
-
- pch_phub_save_reg_conf(pdev);
- ret = pci_save_state(pdev);
- if (ret) {
- dev_err(&pdev->dev,
- " %s -pci_save_state returns %d\n", __func__, ret);
- return ret;
- }
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pci_disable_device(pdev);
- pci_set_power_state(pdev, pci_choose_state(pdev, state));
+ device_wakeup_disable(dev_d);
return 0;
}
-static int pch_phub_resume(struct pci_dev *pdev)
+static int __maybe_unused pch_phub_resume(struct device *dev_d)
{
- int ret;
-
- pci_set_power_state(pdev, PCI_D0);
- pci_restore_state(pdev);
- ret = pci_enable_device(pdev);
- if (ret) {
- dev_err(&pdev->dev,
- "%s-pci_enable_device failed(ret=%d) ", __func__, ret);
- return ret;
- }
-
- pci_enable_wake(pdev, PCI_D3hot, 0);
- pch_phub_restore_reg_conf(pdev);
+ device_wakeup_disable(dev_d);
return 0;
}
-#else
-#define pch_phub_suspend NULL
-#define pch_phub_resume NULL
-#endif /* CONFIG_PM */
static const struct pci_device_id pch_phub_pcidev_id[] = {
{ PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PCH1_PHUB), 1, },
@@ -888,13 +862,14 @@ static const struct pci_device_id pch_phub_pcidev_id[] = {
};
MODULE_DEVICE_TABLE(pci, pch_phub_pcidev_id);
+static SIMPLE_DEV_PM_OPS(pch_phub_pm_ops, pch_phub_suspend, pch_phub_resume);
+
static struct pci_driver pch_phub_driver = {
.name = "pch_phub",
.id_table = pch_phub_pcidev_id,
.probe = pch_phub_probe,
.remove = pch_phub_remove,
- .suspend = pch_phub_suspend,
- .resume = pch_phub_resume
+ .driver.pm = &pch_phub_pm_ops,
};
module_pci_driver(pch_phub_driver);
diff --git a/drivers/misc/phantom.c b/drivers/misc/phantom.c
index 6a5ed0e25ff1..ce72e46a2e73 100644
--- a/drivers/misc/phantom.c
+++ b/drivers/misc/phantom.c
@@ -457,31 +457,26 @@ static void phantom_remove(struct pci_dev *pdev)
pci_disable_device(pdev);
}
-#ifdef CONFIG_PM
-static int phantom_suspend(struct pci_dev *pdev, pm_message_t state)
+static int __maybe_unused phantom_suspend(struct device *dev_d)
{
- struct phantom_device *dev = pci_get_drvdata(pdev);
+ struct phantom_device *dev = dev_get_drvdata(dev_d);
iowrite32(0, dev->caddr + PHN_IRQCTL);
ioread32(dev->caddr + PHN_IRQCTL); /* PCI posting */
- synchronize_irq(pdev->irq);
+ synchronize_irq(to_pci_dev(dev_d)->irq);
return 0;
}
-static int phantom_resume(struct pci_dev *pdev)
+static int __maybe_unused phantom_resume(struct device *dev_d)
{
- struct phantom_device *dev = pci_get_drvdata(pdev);
+ struct phantom_device *dev = dev_get_drvdata(dev_d);
iowrite32(0, dev->caddr + PHN_IRQCTL);
return 0;
}
-#else
-#define phantom_suspend NULL
-#define phantom_resume NULL
-#endif
static struct pci_device_id phantom_pci_tbl[] = {
{ .vendor = PCI_VENDOR_ID_PLX, .device = PCI_DEVICE_ID_PLX_9050,
@@ -491,13 +486,14 @@ static struct pci_device_id phantom_pci_tbl[] = {
};
MODULE_DEVICE_TABLE(pci, phantom_pci_tbl);
+static SIMPLE_DEV_PM_OPS(phantom_pm_ops, phantom_suspend, phantom_resume);
+
static struct pci_driver phantom_pci_driver = {
.name = "phantom",
.id_table = phantom_pci_tbl,
.probe = phantom_probe,
.remove = phantom_remove,
- .suspend = phantom_suspend,
- .resume = phantom_resume
+ .driver.pm = &phantom_pm_ops,
};
static CLASS_ATTR_STRING(version, 0444, PHANTOM_VERSION);
diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c
index b7f510676cd6..7236ae527b19 100644
--- a/drivers/misc/pti.c
+++ b/drivers/misc/pti.c
@@ -496,9 +496,8 @@ static void pti_tty_cleanup(struct tty_struct *tty)
* pti_tty_driver_write()- Write trace debugging data through the char
* interface to the PTI HW. Part of the misc device implementation.
*
- * @filp: Contains private data which is used to obtain
- * master, channel write ID.
- * @data: trace data to be written.
+ * @tty: tty struct containing pti information.
+ * @buf: trace data to be written.
* @len: # of byte to write.
*
* Returns:
@@ -734,8 +733,8 @@ static struct console pti_console = {
* pti_port_activate()- Used to start/initialize any items upon
* first opening of tty_port().
*
- * @port- The tty port number of the PTI device.
- * @tty- The tty struct associated with this device.
+ * @port: The tty port number of the PTI device.
+ * @tty: The tty struct associated with this device.
*
* Returns:
* always returns 0
@@ -755,7 +754,7 @@ static int pti_port_activate(struct tty_port *port, struct tty_struct *tty)
* pti_port_shutdown()- Used to stop/shutdown any items upon the
* last tty port close.
*
- * @port- The tty port number of the PTI device.
+ * @port: The tty port number of the PTI device.
*
* Notes: The primary purpose of the PTI tty port 0 is to hook
* the syslog daemon to it; thus this port will be open for a
@@ -781,8 +780,8 @@ static const struct tty_port_operations tty_port_ops = {
* pti_pci_probe()- Used to detect pti on the pci bus and set
* things up in the driver.
*
- * @pdev- pci_dev struct values for pti.
- * @ent- pci_device_id struct for pti driver.
+ * @pdev: pci_dev struct values for pti.
+ * @ent: pci_device_id struct for pti driver.
*
* Returns:
* 0 for success
@@ -899,7 +898,6 @@ static struct pci_driver pti_pci_driver = {
};
/**
- *
* pti_init()- Overall entry/init call to the pti driver.
* It starts the registration process with the kernel.
*
diff --git a/drivers/misc/sgi-xp/xp_main.c b/drivers/misc/sgi-xp/xp_main.c
index 5fd94d836070..61b03fcefb13 100644
--- a/drivers/misc/sgi-xp/xp_main.c
+++ b/drivers/misc/sgi-xp/xp_main.c
@@ -223,7 +223,7 @@ xpc_disconnect(int ch_number)
}
EXPORT_SYMBOL_GPL(xpc_disconnect);
-int __init
+static int __init
xp_init(void)
{
enum xp_retval ret;
@@ -246,7 +246,7 @@ xp_init(void)
module_init(xp_init);
-void __exit
+static void __exit
xp_exit(void)
{
if (is_uv())
diff --git a/drivers/misc/sram-exec.c b/drivers/misc/sram-exec.c
index cb57ac6ab4c3..6cc31789b38d 100644
--- a/drivers/misc/sram-exec.c
+++ b/drivers/misc/sram-exec.c
@@ -1,7 +1,7 @@
/*
* SRAM protect-exec region helper functions
*
- * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
+ * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
* Dave Gerlach
*
* This program is free software; you can redistribute it and/or modify
diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
index 14136d2cc8f9..f4ddd1e67015 100644
--- a/drivers/misc/ti-st/st_core.c
+++ b/drivers/misc/ti-st/st_core.c
@@ -18,7 +18,8 @@
extern void st_kim_recv(void *, const unsigned char *, long);
void st_int_recv(void *, const unsigned char *, long);
-/* function pointer pointing to either,
+/*
+ * function pointer pointing to either,
* st_kim_recv during registration to receive fw download responses
* st_int_recv after registration to receive proto stack responses
*/
@@ -60,7 +61,8 @@ int st_get_uart_wr_room(struct st_data_s *st_gdata)
return tty->ops->write_room(tty);
}
-/* can be called in from
+/*
+ * can be called in from
* -- KIM (during fw download)
* -- ST Core (during st_write)
*
@@ -100,7 +102,8 @@ static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
kfree_skb(st_gdata->rx_skb);
return;
}
- /* this cannot fail
+ /*
+ * this cannot fail
* this shouldn't take long
* - should be just skb_queue_tail for the
* protocol stack driver
@@ -121,9 +124,8 @@ static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
return;
}
-/**
- * st_reg_complete -
- * to call registration complete callbacks
+/*
+ * st_reg_complete - to call registration complete callbacks
* of all protocol stack drivers
* This function is being called with spin lock held, protocol drivers are
* only expected to complete their waits and do nothing more than that.
@@ -156,21 +158,24 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
pr_debug("len %d room %d", len, room);
if (!len) {
- /* Received packet has only packet header and
+ /*
+ * Received packet has only packet header and
* has zero length payload. So, ask ST CORE to
* forward the packet to protocol driver (BT/FM/GPS)
*/
st_send_frame(chnl_id, st_gdata);
} else if (len > room) {
- /* Received packet's payload length is larger.
+ /*
+ * Received packet's payload length is larger.
* We can't accommodate it in created skb.
*/
pr_err("Data length is too large len %d room %d", len,
room);
kfree_skb(st_gdata->rx_skb);
} else {
- /* Packet header has non-zero payload length and
+ /*
+ * Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
st_gdata->rx_state = ST_W4_DATA;
@@ -178,8 +183,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
return len;
}
- /* Change ST state to continue to process next
- * packet */
+ /* Change ST state to continue to process next packet */
st_gdata->rx_state = ST_W4_PACKET_TYPE;
st_gdata->rx_skb = NULL;
st_gdata->rx_count = 0;
@@ -188,7 +192,7 @@ static inline int st_check_data_len(struct st_data_s *st_gdata,
return 0;
}
-/**
+/*
* st_wakeup_ack - internal function for action when wake-up ack
* received
*/
@@ -199,7 +203,8 @@ static inline void st_wakeup_ack(struct st_data_s *st_gdata,
unsigned long flags = 0;
spin_lock_irqsave(&st_gdata->lock, flags);
- /* de-Q from waitQ and Q in txQ now that the
+ /*
+ * de-Q from waitQ and Q in txQ now that the
* chip is awake
*/
while ((waiting_skb = skb_dequeue(&st_gdata->tx_waitq)))
@@ -213,7 +218,7 @@ static inline void st_wakeup_ack(struct st_data_s *st_gdata,
st_tx_wakeup(st_gdata);
}
-/**
+/*
* st_int_recv - ST's internal receive function.
* Decodes received RAW data and forwards to corresponding
* client drivers (Bluetooth,FM,GPS..etc).
@@ -262,8 +267,10 @@ void st_int_recv(void *disc_data,
/* Waiting for complete packet ? */
case ST_W4_DATA:
pr_debug("Complete pkt received");
- /* Ask ST CORE to forward
- * the packet to protocol driver */
+ /*
+ * Ask ST CORE to forward
+ * the packet to protocol driver
+ */
st_send_frame(st_gdata->rx_chnl, st_gdata);
st_gdata->rx_state = ST_W4_PACKET_TYPE;
@@ -276,7 +283,7 @@ void st_int_recv(void *disc_data,
&st_gdata->rx_skb->data
[proto->offset_len_in_hdr];
pr_debug("plen pointing to %x\n", *plen);
- if (proto->len_size == 1)/* 1 byte len field */
+ if (proto->len_size == 1) /* 1 byte len field */
payload_len = *(unsigned char *)plen;
else if (proto->len_size == 2)
payload_len =
@@ -294,18 +301,23 @@ void st_int_recv(void *disc_data,
}
/* end of if rx_count */
- /* Check first byte of packet and identify module
- * owner (BT/FM/GPS) */
+
+ /*
+ * Check first byte of packet and identify module
+ * owner (BT/FM/GPS)
+ */
switch (*ptr) {
case LL_SLEEP_IND:
case LL_SLEEP_ACK:
case LL_WAKE_UP_IND:
pr_debug("PM packet");
- /* this takes appropriate action based on
+ /*
+ * this takes appropriate action based on
* sleep state received --
*/
st_ll_sleep_state(st_gdata, *ptr);
- /* if WAKEUP_IND collides copy from waitq to txq
+ /*
+ * if WAKEUP_IND collides copy from waitq to txq
* and assume chip awake
*/
spin_unlock_irqrestore(&st_gdata->lock, flags);
@@ -331,7 +343,8 @@ void st_int_recv(void *disc_data,
default:
type = *ptr;
- /* Default case means non-HCILL packets,
+ /*
+ * Default case means non-HCILL packets,
* possibilities are packets for:
* (a) valid protocol - Supported Protocols within
* the ST_MAX_CHANNELS.
@@ -377,7 +390,7 @@ done:
return;
}
-/**
+/*
* st_int_dequeue - internal de-Q function.
* If the previous data set was not written
* completely, return that skb which has the pending data.
@@ -396,7 +409,7 @@ static struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
return skb_dequeue(&st_gdata->txq);
}
-/**
+/*
* st_int_enqueue - internal Q-ing function.
* Will either Q the skb to txq or the tx_waitq
* depending on the ST LL state.
@@ -561,7 +574,8 @@ long st_register(struct st_proto_s *new_proto)
/* release lock previously held - re-locked below */
spin_unlock_irqrestore(&st_gdata->lock, flags);
- /* this may take a while to complete
+ /*
+ * this may take a while to complete
* since it involves BT fw download
*/
err = st_kim_start(st_gdata->kim_data);
@@ -583,7 +597,8 @@ long st_register(struct st_proto_s *new_proto)
clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
st_recv = st_int_recv;
- /* this is where all pending registration
+ /*
+ * this is where all pending registration
* are signalled to be complete by calling callback functions
*/
if ((st_gdata->protos_registered != ST_EMPTY) &&
@@ -593,7 +608,8 @@ long st_register(struct st_proto_s *new_proto)
}
clear_bit(ST_REG_PENDING, &st_gdata->st_state);
- /* check for already registered once more,
+ /*
+ * check for already registered once more,
* since the above check is old
*/
if (st_gdata->is_registered[new_proto->chnl_id] == true) {
@@ -622,7 +638,8 @@ long st_register(struct st_proto_s *new_proto)
}
EXPORT_SYMBOL_GPL(st_register);
-/* to unregister a protocol -
+/*
+ * to unregister a protocol -
* to be called from protocol stack driver
*/
long st_unregister(struct st_proto_s *proto)
@@ -742,7 +759,8 @@ static void st_tty_close(struct tty_struct *tty)
pr_info("%s ", __func__);
- /* TODO:
+ /*
+ * TODO:
* if a protocol has been registered & line discipline
* un-installed for some reason - what should be done ?
*/
@@ -795,7 +813,8 @@ static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
pr_debug("done %s", __func__);
}
-/* wake-up function called in from the TTY layer
+/*
+ * wake-up function called in from the TTY layer
* inside the internal wakeup function will be called
*/
static void st_tty_wakeup(struct tty_struct *tty)
diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
index a36ed1ff5967..f2f6cab97c08 100644
--- a/drivers/misc/ti-st/st_kim.c
+++ b/drivers/misc/ti-st/st_kim.c
@@ -30,7 +30,7 @@ static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
/**********************************************************************/
/* internal functions */
-/**
+/*
* st_get_plat_device -
* function which returns the reference to the platform device
* requested by id. As of now only 1 such device exists (id=0)
@@ -43,7 +43,7 @@ static struct platform_device *st_get_plat_device(int id)
return st_kim_devices[id];
}
-/**
+/*
* validate_firmware_response -
* function to return whether the firmware response was proper
* in case of error don't complete so that waiting for proper
@@ -55,7 +55,8 @@ static void validate_firmware_response(struct kim_data_s *kim_gdata)
if (!skb)
return;
- /* these magic numbers are the position in the response buffer which
+ /*
+ * these magic numbers are the position in the response buffer which
* allows us to distinguish whether the response is for the read
* version info. command
*/
@@ -79,7 +80,8 @@ static void validate_firmware_response(struct kim_data_s *kim_gdata)
kfree_skb(skb);
}
-/* check for data len received inside kim_int_recv
+/*
+ * check for data len received inside kim_int_recv
* most often hit the last case to update state to waiting for data
*/
static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
@@ -91,14 +93,16 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
if (!len) {
validate_firmware_response(kim_gdata);
} else if (len > room) {
- /* Received packet's payload length is larger.
+ /*
+ * Received packet's payload length is larger.
* We can't accommodate it in created skb.
*/
pr_err("Data length is too large len %d room %d", len,
room);
kfree_skb(kim_gdata->rx_skb);
} else {
- /* Packet header has non-zero payload length and
+ /*
+ * Packet header has non-zero payload length and
* we have enough space in created skb. Lets read
* payload data */
kim_gdata->rx_state = ST_W4_DATA;
@@ -106,8 +110,10 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
return len;
}
- /* Change ST LL state to continue to process next
- * packet */
+ /*
+ * Change ST LL state to continue to process next
+ * packet
+ */
kim_gdata->rx_state = ST_W4_PACKET_TYPE;
kim_gdata->rx_skb = NULL;
kim_gdata->rx_count = 0;
@@ -115,7 +121,7 @@ static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
return 0;
}
-/**
+/*
* kim_int_recv - receive function called during firmware download
* firmware download responses on different UART drivers
* have been observed to come in bursts of different
@@ -216,7 +222,8 @@ static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
return timeout ? -ERESTARTSYS : -ETIMEDOUT;
}
reinit_completion(&kim_gdata->kim_rcvd);
- /* the positions 12 & 13 in the response buffer provide with the
+ /*
+ * the positions 12 & 13 in the response buffer provide with the
* chip, major & minor numbers
*/
@@ -263,7 +270,7 @@ static void skip_change_remote_baud(unsigned char **ptr, long *len)
}
}
-/**
+/*
* download_firmware -
* internal function which parses through the .bts firmware
* script file intreprets SEND, DELAY actions only as of now
@@ -295,7 +302,8 @@ static long download_firmware(struct kim_data_s *kim_gdata)
}
ptr = (void *)kim_gdata->fw_entry->data;
len = kim_gdata->fw_entry->size;
- /* bts_header to remove out magic number and
+ /*
+ * bts_header to remove out magic number and
* version
*/
ptr += sizeof(struct bts_header);
@@ -313,8 +321,10 @@ static long download_firmware(struct kim_data_s *kim_gdata)
if (unlikely
(((struct hci_command *)action_ptr)->opcode ==
0xFF36)) {
- /* ignore remote change
- * baud rate HCI VS command */
+ /*
+ * ignore remote change
+ * baud rate HCI VS command
+ */
pr_warn("change remote baud"
" rate command in firmware");
skip_change_remote_baud(&ptr, &len);
@@ -346,7 +356,8 @@ static long download_firmware(struct kim_data_s *kim_gdata)
release_firmware(kim_gdata->fw_entry);
return -ETIMEDOUT;
}
- /* reinit completion before sending for the
+ /*
+ * reinit completion before sending for the
* relevant wait
*/
reinit_completion(&kim_gdata->kim_rcvd);
@@ -418,14 +429,16 @@ void st_kim_recv(void *disc_data, const unsigned char *data, long count)
struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
struct kim_data_s *kim_gdata = st_gdata->kim_data;
- /* proceed to gather all data and distinguish read fw version response
+ /*
+ * proceed to gather all data and distinguish read fw version response
* from other fw responses when data gathering is complete
*/
kim_int_recv(kim_gdata, data, count);
return;
}
-/* to signal completion of line discipline installation
+/*
+ * to signal completion of line discipline installation
* called from ST Core, upon tty_open
*/
void st_kim_complete(void *kim_data)
@@ -434,7 +447,7 @@ void st_kim_complete(void *kim_data)
complete(&kim_gdata->ldisc_installed);
}
-/**
+/*
* st_kim_start - called from ST Core upon 1st registration
* This involves toggling the chip enable gpio, reading
* the firmware version from chip, forming the fw file name
@@ -472,8 +485,10 @@ long st_kim_start(void *kim_data)
err = wait_for_completion_interruptible_timeout(
&kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
if (!err) {
- /* ldisc installation timeout,
- * flush uart, power cycle BT_EN */
+ /*
+ * ldisc installation timeout,
+ * flush uart, power cycle BT_EN
+ */
pr_err("ldisc installation timeout");
err = st_kim_stop(kim_gdata);
continue;
@@ -482,8 +497,10 @@ long st_kim_start(void *kim_data)
pr_info("line discipline installed");
err = download_firmware(kim_gdata);
if (err != 0) {
- /* ldisc installed but fw download failed,
- * flush uart & power cycle BT_EN */
+ /*
+ * ldisc installed but fw download failed,
+ * flush uart & power cycle BT_EN
+ */
pr_err("download firmware failed");
err = st_kim_stop(kim_gdata);
continue;
@@ -495,7 +512,7 @@ long st_kim_start(void *kim_data)
return err;
}
-/**
+/*
* st_kim_stop - stop communication with chip.
* This can be called from ST Core/KIM, on the-
* (a) last un-register when chip need not be powered there-after,
@@ -650,7 +667,7 @@ static const struct attribute_group uim_attr_grp = {
.attrs = uim_attrs,
};
-/**
+/*
* st_kim_ref - reference the core's data
* This references the per-ST platform device in the arch/xx/
* board-xx.c file.
@@ -729,8 +746,7 @@ static int kim_probe(struct platform_device *pdev)
pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
goto err_sysfs_group;
}
- /* get reference of pdev for request_firmware
- */
+ /* get reference of pdev for request_firmware */
kim_gdata->kim_pdev = pdev;
init_completion(&kim_gdata->kim_rcvd);
init_completion(&kim_gdata->ldisc_installed);
@@ -772,7 +788,8 @@ static int kim_remove(struct platform_device *pdev)
kim_gdata = platform_get_drvdata(pdev);
- /* Free the Bluetooth/FM/GPIO
+ /*
+ * Free the Bluetooth/FM/GPIO
* nShutdown gpio from the system
*/
gpio_free(pdata->nshutdown_gpio);
diff --git a/drivers/misc/tifm_7xx1.c b/drivers/misc/tifm_7xx1.c
index e6b40aa8fb42..228f2eb1d476 100644
--- a/drivers/misc/tifm_7xx1.c
+++ b/drivers/misc/tifm_7xx1.c
@@ -207,10 +207,9 @@ static void tifm_7xx1_switch_media(struct work_struct *work)
spin_unlock_irqrestore(&fm->lock, flags);
}
-#ifdef CONFIG_PM
-
-static int tifm_7xx1_suspend(struct pci_dev *dev, pm_message_t state)
+static int __maybe_unused tifm_7xx1_suspend(struct device *dev_d)
{
+ struct pci_dev *dev = to_pci_dev(dev_d);
struct tifm_adapter *fm = pci_get_drvdata(dev);
int cnt;
@@ -221,15 +220,13 @@ static int tifm_7xx1_suspend(struct pci_dev *dev, pm_message_t state)
tifm_7xx1_sock_power_off(fm->sockets[cnt]->addr);
}
- pci_save_state(dev);
- pci_enable_wake(dev, pci_choose_state(dev, state), 0);
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
+ device_wakeup_disable(dev_d);
return 0;
}
-static int tifm_7xx1_resume(struct pci_dev *dev)
+static int __maybe_unused tifm_7xx1_resume(struct device *dev_d)
{
+ struct pci_dev *dev = to_pci_dev(dev_d);
struct tifm_adapter *fm = pci_get_drvdata(dev);
int rc;
unsigned long timeout;
@@ -242,11 +239,6 @@ static int tifm_7xx1_resume(struct pci_dev *dev)
if (WARN_ON(fm->num_sockets > ARRAY_SIZE(new_ids)))
return -ENXIO;
- pci_set_power_state(dev, PCI_D0);
- pci_restore_state(dev);
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
pci_set_master(dev);
dev_dbg(&dev->dev, "resuming host\n");
@@ -297,13 +289,6 @@ static int tifm_7xx1_resume(struct pci_dev *dev)
return 0;
}
-#else
-
-#define tifm_7xx1_suspend NULL
-#define tifm_7xx1_resume NULL
-
-#endif /* CONFIG_PM */
-
static int tifm_7xx1_dummy_has_ms_pif(struct tifm_adapter *fm,
struct tifm_dev *sock)
{
@@ -424,13 +409,14 @@ static const struct pci_device_id tifm_7xx1_pci_tbl[] = {
{ }
};
+static SIMPLE_DEV_PM_OPS(tifm_7xx1_pm_ops, tifm_7xx1_suspend, tifm_7xx1_resume);
+
static struct pci_driver tifm_7xx1_driver = {
.name = DRIVER_NAME,
.id_table = tifm_7xx1_pci_tbl,
.probe = tifm_7xx1_probe,
.remove = tifm_7xx1_remove,
- .suspend = tifm_7xx1_suspend,
- .resume = tifm_7xx1_resume,
+ .driver.pm = &tifm_7xx1_pm_ops,
};
module_pci_driver(tifm_7xx1_driver);
diff --git a/drivers/misc/uacce/uacce.c b/drivers/misc/uacce/uacce.c
index 107028e77ca3..aa91f69a5fa9 100644
--- a/drivers/misc/uacce/uacce.c
+++ b/drivers/misc/uacce/uacce.c
@@ -179,14 +179,6 @@ static int uacce_fops_release(struct inode *inode, struct file *filep)
return 0;
}
-static vm_fault_t uacce_vma_fault(struct vm_fault *vmf)
-{
- if (vmf->flags & (FAULT_FLAG_MKWRITE | FAULT_FLAG_WRITE))
- return VM_FAULT_SIGBUS;
-
- return 0;
-}
-
static void uacce_vma_close(struct vm_area_struct *vma)
{
struct uacce_queue *q = vma->vm_private_data;
@@ -199,7 +191,6 @@ static void uacce_vma_close(struct vm_area_struct *vma)
}
static const struct vm_operations_struct uacce_vm_ops = {
- .fault = uacce_vma_fault,
.close = uacce_vma_close,
};
diff --git a/drivers/mmc/host/rtsx_pci_sdmmc.c b/drivers/mmc/host/rtsx_pci_sdmmc.c
index 5a71f6678fd3..bce910de8b4d 100644
--- a/drivers/mmc/host/rtsx_pci_sdmmc.c
+++ b/drivers/mmc/host/rtsx_pci_sdmmc.c
@@ -1336,6 +1336,8 @@ static void init_extra_caps(struct realtek_pci_sdmmc *host)
mmc->caps |= MMC_CAP_1_8V_DDR;
if (pcr->extra_caps & EXTRA_CAPS_MMC_8BIT)
mmc->caps |= MMC_CAP_8_BIT_DATA;
+ if (pcr->extra_caps & EXTRA_CAPS_NO_MMC)
+ mmc->caps2 |= MMC_CAP2_NO_MMC;
}
static void realtek_init_host(struct realtek_pci_sdmmc *host)
diff --git a/drivers/mux/adgs1408.c b/drivers/mux/adgs1408.c
index 89096f10f4c4..12466b06692c 100644
--- a/drivers/mux/adgs1408.c
+++ b/drivers/mux/adgs1408.c
@@ -6,9 +6,9 @@
*/
#include <linux/err.h>
+#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/mux/driver.h>
-#include <linux/of_platform.h>
#include <linux/property.h>
#include <linux/spi/spi.h>
@@ -59,7 +59,7 @@ static int adgs1408_probe(struct spi_device *spi)
s32 idle_state;
int ret;
- chip_id = (enum adgs1408_chip_id)of_device_get_match_data(dev);
+ chip_id = (enum adgs1408_chip_id)device_get_match_data(dev);
if (!chip_id)
chip_id = spi_get_device_id(spi)->driver_data;
@@ -119,7 +119,7 @@ MODULE_DEVICE_TABLE(of, adgs1408_of_match);
static struct spi_driver adgs1408_driver = {
.driver = {
.name = "adgs1408",
- .of_match_table = of_match_ptr(adgs1408_of_match),
+ .of_match_table = adgs1408_of_match,
},
.probe = adgs1408_probe,
.id_table = adgs1408_spi_id,
diff --git a/drivers/nvmem/Kconfig b/drivers/nvmem/Kconfig
index d7b7f6d688e7..954d3b4a52ab 100644
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@@ -7,9 +7,6 @@ menuconfig NVMEM
This framework is designed to provide a generic interface to NVMEM
from both the Linux Kernel and the userspace.
- This driver can also be built as a module. If so, the module
- will be called nvmem_core.
-
If unsure, say no.
if NVMEM
diff --git a/drivers/nvmem/core.c b/drivers/nvmem/core.c
index 927eb5f6003f..6cd3edb2eaf6 100644
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@@ -135,6 +135,9 @@ static ssize_t bin_attr_nvmem_read(struct file *filp, struct kobject *kobj,
if (pos >= nvmem->size)
return 0;
+ if (!IS_ALIGNED(pos, nvmem->stride))
+ return -EINVAL;
+
if (count < nvmem->word_size)
return -EINVAL;
@@ -172,6 +175,9 @@ static ssize_t bin_attr_nvmem_write(struct file *filp, struct kobject *kobj,
if (pos >= nvmem->size)
return -EFBIG;
+ if (!IS_ALIGNED(pos, nvmem->stride))
+ return -EINVAL;
+
if (count < nvmem->word_size)
return -EINVAL;
@@ -567,7 +573,7 @@ static int nvmem_add_cells_from_of(struct nvmem_device *nvmem)
/**
* nvmem_register() - Register a nvmem device for given nvmem_config.
- * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
*
* @config: nvmem device configuration with which nvmem device is created.
*
@@ -629,12 +635,18 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)
if (!config->no_of_node)
nvmem->dev.of_node = config->dev->of_node;
- if (config->id == -1 && config->name) {
+ switch (config->id) {
+ case NVMEM_DEVID_NONE:
dev_set_name(&nvmem->dev, "%s", config->name);
- } else {
+ break;
+ case NVMEM_DEVID_AUTO:
+ dev_set_name(&nvmem->dev, "%s%d", config->name, nvmem->id);
+ break;
+ default:
dev_set_name(&nvmem->dev, "%s%d",
config->name ? : "nvmem",
config->name ? config->id : nvmem->id);
+ break;
}
nvmem->read_only = device_property_present(config->dev, "read-only") ||
@@ -722,7 +734,7 @@ static void devm_nvmem_release(struct device *dev, void *res)
/**
* devm_nvmem_register() - Register a managed nvmem device for given
* nvmem_config.
- * Also creates an binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
+ * Also creates a binary entry in /sys/bus/nvmem/devices/dev-name/nvmem
*
* @dev: Device that uses the nvmem device.
* @config: nvmem device configuration with which nvmem device is created.
@@ -766,7 +778,7 @@ static int devm_nvmem_match(struct device *dev, void *res, void *data)
* @dev: Device that uses the nvmem device.
* @nvmem: Pointer to previously registered nvmem device.
*
- * Return: Will be an negative on error or a zero on success.
+ * Return: Will be negative on error or zero on success.
*/
int devm_nvmem_unregister(struct device *dev, struct nvmem_device *nvmem)
{
@@ -1369,7 +1381,22 @@ static int nvmem_cell_read_common(struct device *dev, const char *cell_id,
}
/**
- * nvmem_cell_read_u16() - Read a cell value as an u16
+ * nvmem_cell_read_u8() - Read a cell value as a u8
+ *
+ * @dev: Device that requests the nvmem cell.
+ * @cell_id: Name of nvmem cell to read.
+ * @val: pointer to output value.
+ *
+ * Return: 0 on success or negative errno.
+ */
+int nvmem_cell_read_u8(struct device *dev, const char *cell_id, u8 *val)
+{
+ return nvmem_cell_read_common(dev, cell_id, val, sizeof(*val));
+}
+EXPORT_SYMBOL_GPL(nvmem_cell_read_u8);
+
+/**
+ * nvmem_cell_read_u16() - Read a cell value as a u16
*
* @dev: Device that requests the nvmem cell.
* @cell_id: Name of nvmem cell to read.
@@ -1384,7 +1411,7 @@ int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val)
EXPORT_SYMBOL_GPL(nvmem_cell_read_u16);
/**
- * nvmem_cell_read_u32() - Read a cell value as an u32
+ * nvmem_cell_read_u32() - Read a cell value as a u32
*
* @dev: Device that requests the nvmem cell.
* @cell_id: Name of nvmem cell to read.
@@ -1399,7 +1426,7 @@ int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val)
EXPORT_SYMBOL_GPL(nvmem_cell_read_u32);
/**
- * nvmem_cell_read_u64() - Read a cell value as an u64
+ * nvmem_cell_read_u64() - Read a cell value as a u64
*
* @dev: Device that requests the nvmem cell.
* @cell_id: Name of nvmem cell to read.
diff --git a/drivers/nvmem/qcom-spmi-sdam.c b/drivers/nvmem/qcom-spmi-sdam.c
index 8682cda448d6..a72704cd0468 100644
--- a/drivers/nvmem/qcom-spmi-sdam.c
+++ b/drivers/nvmem/qcom-spmi-sdam.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Copyright (c) 2017 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2017, 2020 The Linux Foundation. All rights reserved.
*/
#include <linux/device.h>
@@ -141,7 +141,7 @@ static int sdam_probe(struct platform_device *pdev)
sdam->sdam_config.dev = &pdev->dev;
sdam->sdam_config.name = "spmi_sdam";
- sdam->sdam_config.id = pdev->id;
+ sdam->sdam_config.id = NVMEM_DEVID_AUTO;
sdam->sdam_config.owner = THIS_MODULE,
sdam->sdam_config.stride = 1;
sdam->sdam_config.word_size = 1;
diff --git a/drivers/nvmem/qfprom.c b/drivers/nvmem/qfprom.c
index 8a91717600be..5e9e60e2e591 100644
--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@@ -3,57 +3,350 @@
* Copyright (C) 2015 Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
*/
+#include <linux/clk.h>
#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mod_devicetable.h>
-#include <linux/io.h>
#include <linux/nvmem-provider.h>
#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+/* Blow timer clock frequency in Mhz */
+#define QFPROM_BLOW_TIMER_OFFSET 0x03c
+
+/* Amount of time required to hold charge to blow fuse in micro-seconds */
+#define QFPROM_FUSE_BLOW_POLL_US 100
+#define QFPROM_FUSE_BLOW_TIMEOUT_US 1000
+
+#define QFPROM_BLOW_STATUS_OFFSET 0x048
+#define QFPROM_BLOW_STATUS_BUSY 0x1
+#define QFPROM_BLOW_STATUS_READY 0x0
+
+#define QFPROM_ACCEL_OFFSET 0x044
+
+#define QFPROM_VERSION_OFFSET 0x0
+#define QFPROM_MAJOR_VERSION_SHIFT 28
+#define QFPROM_MAJOR_VERSION_MASK GENMASK(31, QFPROM_MAJOR_VERSION_SHIFT)
+#define QFPROM_MINOR_VERSION_SHIFT 16
+#define QFPROM_MINOR_VERSION_MASK GENMASK(27, QFPROM_MINOR_VERSION_SHIFT)
+
+static bool read_raw_data;
+module_param(read_raw_data, bool, 0644);
+MODULE_PARM_DESC(read_raw_data, "Read raw instead of corrected data");
+/**
+ * struct qfprom_soc_data - config that varies from SoC to SoC.
+ *
+ * @accel_value: Should contain qfprom accel value.
+ * @qfprom_blow_timer_value: The timer value of qfprom when doing efuse blow.
+ * @qfprom_blow_set_freq: The frequency required to set when we start the
+ * fuse blowing.
+ */
+struct qfprom_soc_data {
+ u32 accel_value;
+ u32 qfprom_blow_timer_value;
+ u32 qfprom_blow_set_freq;
+};
+
+/**
+ * struct qfprom_priv - structure holding qfprom attributes
+ *
+ * @qfpraw: iomapped memory space for qfprom-efuse raw address space.
+ * @qfpconf: iomapped memory space for qfprom-efuse configuration address
+ * space.
+ * @qfpcorrected: iomapped memory space for qfprom corrected address space.
+ * @qfpsecurity: iomapped memory space for qfprom security control space.
+ * @dev: qfprom device structure.
+ * @secclk: Clock supply.
+ * @vcc: Regulator supply.
+ * @soc_data: Data that for things that varies from SoC to SoC.
+ */
struct qfprom_priv {
- void __iomem *base;
+ void __iomem *qfpraw;
+ void __iomem *qfpconf;
+ void __iomem *qfpcorrected;
+ void __iomem *qfpsecurity;
+ struct device *dev;
+ struct clk *secclk;
+ struct regulator *vcc;
+ const struct qfprom_soc_data *soc_data;
+};
+
+/**
+ * struct qfprom_touched_values - saved values to restore after blowing
+ *
+ * @clk_rate: The rate the clock was at before blowing.
+ * @accel_val: The value of the accel reg before blowing.
+ * @timer_val: The value of the timer before blowing.
+ */
+struct qfprom_touched_values {
+ unsigned long clk_rate;
+ u32 accel_val;
+ u32 timer_val;
};
+/**
+ * qfprom_disable_fuse_blowing() - Undo enabling of fuse blowing.
+ * @priv: Our driver data.
+ * @old: The data that was stashed from before fuse blowing.
+ *
+ * Resets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors but doesn't return an error code
+ * since there's not much we can do upon failure.
+ */
+static void qfprom_disable_fuse_blowing(const struct qfprom_priv *priv,
+ const struct qfprom_touched_values *old)
+{
+ int ret;
+
+ ret = regulator_disable(priv->vcc);
+ if (ret)
+ dev_warn(priv->dev, "Failed to disable regulator (ignoring)\n");
+
+ ret = clk_set_rate(priv->secclk, old->clk_rate);
+ if (ret)
+ dev_warn(priv->dev,
+ "Failed to set clock rate for disable (ignoring)\n");
+
+ clk_disable_unprepare(priv->secclk);
+
+ writel(old->timer_val, priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ writel(old->accel_val, priv->qfpconf + QFPROM_ACCEL_OFFSET);
+}
+
+/**
+ * qfprom_enable_fuse_blowing() - Enable fuse blowing.
+ * @priv: Our driver data.
+ * @old: We'll stash stuff here to use when disabling.
+ *
+ * Sets the value of the blow timer, accel register and the clock
+ * and voltage settings.
+ *
+ * Prints messages if there are errors so caller doesn't need to.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_enable_fuse_blowing(const struct qfprom_priv *priv,
+ struct qfprom_touched_values *old)
+{
+ int ret;
+
+ ret = clk_prepare_enable(priv->secclk);
+ if (ret) {
+ dev_err(priv->dev, "Failed to enable clock\n");
+ return ret;
+ }
+
+ old->clk_rate = clk_get_rate(priv->secclk);
+ ret = clk_set_rate(priv->secclk, priv->soc_data->qfprom_blow_set_freq);
+ if (ret) {
+ dev_err(priv->dev, "Failed to set clock rate for enable\n");
+ goto err_clk_prepared;
+ }
+
+ ret = regulator_enable(priv->vcc);
+ if (ret) {
+ dev_err(priv->dev, "Failed to enable regulator\n");
+ goto err_clk_rate_set;
+ }
+
+ old->timer_val = readl(priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ old->accel_val = readl(priv->qfpconf + QFPROM_ACCEL_OFFSET);
+ writel(priv->soc_data->qfprom_blow_timer_value,
+ priv->qfpconf + QFPROM_BLOW_TIMER_OFFSET);
+ writel(priv->soc_data->accel_value,
+ priv->qfpconf + QFPROM_ACCEL_OFFSET);
+
+ return 0;
+
+err_clk_rate_set:
+ clk_set_rate(priv->secclk, old->clk_rate);
+err_clk_prepared:
+ clk_disable_unprepare(priv->secclk);
+ return ret;
+}
+
+/**
+ * qfprom_efuse_reg_write() - Write to fuses.
+ * @context: Our driver data.
+ * @reg: The offset to write at.
+ * @_val: Pointer to data to write.
+ * @bytes: The number of bytes to write.
+ *
+ * Writes to fuses. WARNING: THIS IS PERMANENT.
+ *
+ * Return: 0 or -err.
+ */
+static int qfprom_reg_write(void *context, unsigned int reg, void *_val,
+ size_t bytes)
+{
+ struct qfprom_priv *priv = context;
+ struct qfprom_touched_values old;
+ int words = bytes / 4;
+ u32 *value = _val;
+ u32 blow_status;
+ int ret;
+ int i;
+
+ dev_dbg(priv->dev,
+ "Writing to raw qfprom region : %#010x of size: %zu\n",
+ reg, bytes);
+
+ /*
+ * The hardware only allows us to write word at a time, but we can
+ * read byte at a time. Until the nvmem framework allows a separate
+ * word_size and stride for reading vs. writing, we'll enforce here.
+ */
+ if (bytes % 4) {
+ dev_err(priv->dev,
+ "%zu is not an integral number of words\n", bytes);
+ return -EINVAL;
+ }
+ if (reg % 4) {
+ dev_err(priv->dev,
+ "Invalid offset: %#x. Must be word aligned\n", reg);
+ return -EINVAL;
+ }
+
+ ret = qfprom_enable_fuse_blowing(priv, &old);
+ if (ret)
+ return ret;
+
+ ret = readl_relaxed_poll_timeout(
+ priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+ blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+ QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+ if (ret) {
+ dev_err(priv->dev,
+ "Timeout waiting for initial ready; aborting.\n");
+ goto exit_enabled_fuse_blowing;
+ }
+
+ for (i = 0; i < words; i++)
+ writel(value[i], priv->qfpraw + reg + (i * 4));
+
+ ret = readl_relaxed_poll_timeout(
+ priv->qfpconf + QFPROM_BLOW_STATUS_OFFSET,
+ blow_status, blow_status == QFPROM_BLOW_STATUS_READY,
+ QFPROM_FUSE_BLOW_POLL_US, QFPROM_FUSE_BLOW_TIMEOUT_US);
+
+ /* Give an error, but not much we can do in this case */
+ if (ret)
+ dev_err(priv->dev, "Timeout waiting for finish.\n");
+
+exit_enabled_fuse_blowing:
+ qfprom_disable_fuse_blowing(priv, &old);
+
+ return ret;
+}
+
static int qfprom_reg_read(void *context,
unsigned int reg, void *_val, size_t bytes)
{
struct qfprom_priv *priv = context;
u8 *val = _val;
int i = 0, words = bytes;
+ void __iomem *base = priv->qfpcorrected;
+
+ if (read_raw_data && priv->qfpraw)
+ base = priv->qfpraw;
while (words--)
- *val++ = readb(priv->base + reg + i++);
+ *val++ = readb(base + reg + i++);
return 0;
}
-static struct nvmem_config econfig = {
- .name = "qfprom",
- .stride = 1,
- .word_size = 1,
- .reg_read = qfprom_reg_read,
+static const struct qfprom_soc_data qfprom_7_8_data = {
+ .accel_value = 0xD10,
+ .qfprom_blow_timer_value = 25,
+ .qfprom_blow_set_freq = 4800000,
};
static int qfprom_probe(struct platform_device *pdev)
{
+ struct nvmem_config econfig = {
+ .name = "qfprom",
+ .stride = 1,
+ .word_size = 1,
+ .id = NVMEM_DEVID_AUTO,
+ .reg_read = qfprom_reg_read,
+ };
struct device *dev = &pdev->dev;
struct resource *res;
struct nvmem_device *nvmem;
struct qfprom_priv *priv;
+ int ret;
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
if (!priv)
return -ENOMEM;
+ /* The corrected section is always provided */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- priv->base = devm_ioremap_resource(dev, res);
- if (IS_ERR(priv->base))
- return PTR_ERR(priv->base);
+ priv->qfpcorrected = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpcorrected))
+ return PTR_ERR(priv->qfpcorrected);
econfig.size = resource_size(res);
econfig.dev = dev;
econfig.priv = priv;
+ priv->dev = dev;
+
+ /*
+ * If more than one region is provided then the OS has the ability
+ * to write.
+ */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (res) {
+ u32 version;
+ int major_version, minor_version;
+
+ priv->qfpraw = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpraw))
+ return PTR_ERR(priv->qfpraw);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ priv->qfpconf = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpconf))
+ return PTR_ERR(priv->qfpconf);
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ priv->qfpsecurity = devm_ioremap_resource(dev, res);
+ if (IS_ERR(priv->qfpsecurity))
+ return PTR_ERR(priv->qfpsecurity);
+
+ version = readl(priv->qfpsecurity + QFPROM_VERSION_OFFSET);
+ major_version = (version & QFPROM_MAJOR_VERSION_MASK) >>
+ QFPROM_MAJOR_VERSION_SHIFT;
+ minor_version = (version & QFPROM_MINOR_VERSION_MASK) >>
+ QFPROM_MINOR_VERSION_SHIFT;
+
+ if (major_version == 7 && minor_version == 8)
+ priv->soc_data = &qfprom_7_8_data;
+
+ priv->vcc = devm_regulator_get(&pdev->dev, "vcc");
+ if (IS_ERR(priv->vcc))
+ return PTR_ERR(priv->vcc);
+
+ priv->secclk = devm_clk_get(dev, "core");
+ if (IS_ERR(priv->secclk)) {
+ ret = PTR_ERR(priv->secclk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(dev, "Error getting clock: %d\n", ret);
+ return ret;
+ }
+
+ /* Only enable writing if we have SoC data. */
+ if (priv->soc_data)
+ econfig.reg_write = qfprom_reg_write;
+ }
+
nvmem = devm_nvmem_register(dev, &econfig);
return PTR_ERR_OR_ZERO(nvmem);
diff --git a/drivers/nvmem/sc27xx-efuse.c b/drivers/nvmem/sc27xx-efuse.c
index ab5e7e0bc3d8..c825fc902d10 100644
--- a/drivers/nvmem/sc27xx-efuse.c
+++ b/drivers/nvmem/sc27xx-efuse.c
@@ -4,12 +4,14 @@
#include <linux/hwspinlock.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/nvmem-provider.h>
/* PMIC global registers definition */
#define SC27XX_MODULE_EN 0xc08
+#define SC2730_MODULE_EN 0x1808
#define SC27XX_EFUSE_EN BIT(6)
/* Efuse controller registers definition */
@@ -49,12 +51,29 @@
#define SC27XX_EFUSE_POLL_TIMEOUT 3000000
#define SC27XX_EFUSE_POLL_DELAY_US 10000
+/*
+ * Since different PMICs of SC27xx series can have different
+ * address , we should save address in the device data structure.
+ */
+struct sc27xx_efuse_variant_data {
+ u32 module_en;
+};
+
struct sc27xx_efuse {
struct device *dev;
struct regmap *regmap;
struct hwspinlock *hwlock;
struct mutex mutex;
u32 base;
+ const struct sc27xx_efuse_variant_data *var_data;
+};
+
+static const struct sc27xx_efuse_variant_data sc2731_edata = {
+ .module_en = SC27XX_MODULE_EN,
+};
+
+static const struct sc27xx_efuse_variant_data sc2730_edata = {
+ .module_en = SC2730_MODULE_EN,
};
/*
@@ -119,7 +138,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
return ret;
/* Enable the efuse controller. */
- ret = regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN,
+ ret = regmap_update_bits(efuse->regmap, efuse->var_data->module_en,
SC27XX_EFUSE_EN, SC27XX_EFUSE_EN);
if (ret)
goto unlock_efuse;
@@ -169,7 +188,7 @@ static int sc27xx_efuse_read(void *context, u32 offset, void *val, size_t bytes)
disable_efuse:
/* Disable the efuse controller after reading. */
- regmap_update_bits(efuse->regmap, SC27XX_MODULE_EN, SC27XX_EFUSE_EN, 0);
+ regmap_update_bits(efuse->regmap, efuse->var_data->module_en, SC27XX_EFUSE_EN, 0);
unlock_efuse:
sc27xx_efuse_unlock(efuse);
@@ -219,6 +238,7 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
mutex_init(&efuse->mutex);
efuse->dev = &pdev->dev;
+ efuse->var_data = of_device_get_match_data(&pdev->dev);
econfig.stride = 1;
econfig.word_size = 1;
@@ -238,7 +258,8 @@ static int sc27xx_efuse_probe(struct platform_device *pdev)
}
static const struct of_device_id sc27xx_efuse_of_match[] = {
- { .compatible = "sprd,sc2731-efuse" },
+ { .compatible = "sprd,sc2731-efuse", .data = &sc2731_edata},
+ { .compatible = "sprd,sc2730-efuse", .data = &sc2730_edata},
{ }
};
diff --git a/drivers/nvmem/sprd-efuse.c b/drivers/nvmem/sprd-efuse.c
index 925feb21d5ad..59523245db8a 100644
--- a/drivers/nvmem/sprd-efuse.c
+++ b/drivers/nvmem/sprd-efuse.c
@@ -378,8 +378,8 @@ static int sprd_efuse_probe(struct platform_device *pdev)
return -ENOMEM;
efuse->base = devm_platform_ioremap_resource(pdev, 0);
- if (!efuse->base)
- return -ENOMEM;
+ if (IS_ERR(efuse->base))
+ return PTR_ERR(efuse->base);
ret = of_hwspin_lock_get_id(np, 0);
if (ret < 0) {
diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
index b3ed94b98d9b..de9362c25c07 100644
--- a/drivers/phy/Kconfig
+++ b/drivers/phy/Kconfig
@@ -70,5 +70,6 @@ source "drivers/phy/st/Kconfig"
source "drivers/phy/tegra/Kconfig"
source "drivers/phy/ti/Kconfig"
source "drivers/phy/intel/Kconfig"
+source "drivers/phy/xilinx/Kconfig"
endmenu
diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
index 310c149a9df5..c27408e4daae 100644
--- a/drivers/phy/Makefile
+++ b/drivers/phy/Makefile
@@ -8,24 +8,25 @@ obj-$(CONFIG_GENERIC_PHY_MIPI_DPHY) += phy-core-mipi-dphy.o
obj-$(CONFIG_PHY_LPC18XX_USB_OTG) += phy-lpc18xx-usb-otg.o
obj-$(CONFIG_PHY_XGENE) += phy-xgene.o
obj-$(CONFIG_PHY_PISTACHIO_USB) += phy-pistachio-usb.o
-obj-$(CONFIG_ARCH_SUNXI) += allwinner/
-obj-$(CONFIG_ARCH_MESON) += amlogic/
-obj-$(CONFIG_ARCH_MEDIATEK) += mediatek/
-obj-$(CONFIG_ARCH_RENESAS) += renesas/
-obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
-obj-$(CONFIG_ARCH_TEGRA) += tegra/
-obj-y += broadcom/ \
+obj-y += allwinner/ \
+ amlogic/ \
+ broadcom/ \
cadence/ \
freescale/ \
hisilicon/ \
intel/ \
lantiq/ \
marvell/ \
+ mediatek/ \
motorola/ \
mscc/ \
qualcomm/ \
ralink/ \
+ renesas/ \
+ rockchip/ \
samsung/ \
socionext/ \
st/ \
- ti/
+ tegra/ \
+ ti/ \
+ xilinx/
diff --git a/drivers/phy/allwinner/Kconfig b/drivers/phy/allwinner/Kconfig
index e760d89d3976..fb584518b2d0 100644
--- a/drivers/phy/allwinner/Kconfig
+++ b/drivers/phy/allwinner/Kconfig
@@ -22,7 +22,7 @@ config PHY_SUN4I_USB
config PHY_SUN6I_MIPI_DPHY
tristate "Allwinner A31 MIPI D-PHY Support"
depends on ARCH_SUNXI || COMPILE_TEST
- depends on HAS_IOMEM
+ depends on HAS_IOMEM && COMMON_CLK
depends on RESET_CONTROLLER
select GENERIC_PHY
select GENERIC_PHY_MIPI_DPHY
diff --git a/drivers/phy/allwinner/phy-sun4i-usb.c b/drivers/phy/allwinner/phy-sun4i-usb.c
index e5842e48a5e0..651d5e2a25ce 100644
--- a/drivers/phy/allwinner/phy-sun4i-usb.c
+++ b/drivers/phy/allwinner/phy-sun4i-usb.c
@@ -7,7 +7,7 @@
* Based on code from
* Allwinner Technology Co., Ltd. <www.allwinnertech.com>
*
- * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ * Modelled after: Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
*/
@@ -16,6 +16,7 @@
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/extcon-provider.h>
+#include <linux/gpio/consumer.h>
#include <linux/io.h>
#include <linux/interrupt.h>
#include <linux/kernel.h>
diff --git a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
index 79c8af5c7c1d..1fa761ba6cbb 100644
--- a/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
+++ b/drivers/phy/allwinner/phy-sun6i-mipi-dphy.c
@@ -233,7 +233,7 @@ static int sun6i_dphy_exit(struct phy *phy)
}
-static struct phy_ops sun6i_dphy_ops = {
+static const struct phy_ops sun6i_dphy_ops = {
.configure = sun6i_dphy_configure,
.power_on = sun6i_dphy_power_on,
.power_off = sun6i_dphy_power_off,
@@ -241,7 +241,7 @@ static struct phy_ops sun6i_dphy_ops = {
.exit = sun6i_dphy_exit,
};
-static struct regmap_config sun6i_dphy_regmap_config = {
+static const struct regmap_config sun6i_dphy_regmap_config = {
.reg_bits = 32,
.val_bits = 32,
.reg_stride = 4,
diff --git a/drivers/phy/broadcom/Kconfig b/drivers/phy/broadcom/Kconfig
index b29f11c19155..a1f1a9c90d0d 100644
--- a/drivers/phy/broadcom/Kconfig
+++ b/drivers/phy/broadcom/Kconfig
@@ -2,6 +2,14 @@
#
# Phy drivers for Broadcom platforms
#
+config PHY_BCM63XX_USBH
+ tristate "BCM63xx USBH PHY driver"
+ depends on BMIPS_GENERIC || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this to support the BCM63xx USBH PHY driver.
+ If unsure, say N.
+
config PHY_CYGNUS_PCIE
tristate "Broadcom Cygnus PCIe PHY driver"
depends on OF && (ARCH_BCM_CYGNUS || COMPILE_TEST)
diff --git a/drivers/phy/broadcom/Makefile b/drivers/phy/broadcom/Makefile
index c78de546135c..7024127f86ad 100644
--- a/drivers/phy/broadcom/Makefile
+++ b/drivers/phy/broadcom/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_PHY_BCM63XX_USBH) += phy-bcm63xx-usbh.o
obj-$(CONFIG_PHY_CYGNUS_PCIE) += phy-bcm-cygnus-pcie.o
obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o
obj-$(CONFIG_PHY_BCM_NS_USB2) += phy-bcm-ns-usb2.o
diff --git a/drivers/phy/broadcom/phy-bcm63xx-usbh.c b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
new file mode 100644
index 000000000000..6c05ba8b08be
--- /dev/null
+++ b/drivers/phy/broadcom/phy-bcm63xx-usbh.c
@@ -0,0 +1,457 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * BCM6328 USBH PHY Controller Driver
+ *
+ * Copyright (C) 2020 Álvaro Fernández Rojas <noltari@gmail.com>
+ * Copyright (C) 2015 Simon Arlott
+ *
+ * Derived from bcm963xx_4.12L.06B_consumer/kernel/linux/arch/mips/bcm963xx/setup.c:
+ * Copyright (C) 2002 Broadcom Corporation
+ *
+ * Derived from OpenWrt patches:
+ * Copyright (C) 2013 Jonas Gorski <jonas.gorski@gmail.com>
+ * Copyright (C) 2013 Florian Fainelli <f.fainelli@gmail.com>
+ * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr>
+ */
+
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+/* USBH control register offsets */
+enum usbh_regs {
+ USBH_BRT_CONTROL1 = 0,
+ USBH_BRT_CONTROL2,
+ USBH_BRT_STATUS1,
+ USBH_BRT_STATUS2,
+ USBH_UTMI_CONTROL1,
+#define USBH_UC1_DEV_MODE_SEL BIT(0)
+ USBH_TEST_PORT_CONTROL,
+ USBH_PLL_CONTROL1,
+#define USBH_PLLC_REFCLKSEL_SHIFT 0
+#define USBH_PLLC_REFCLKSEL_MASK (0x3 << USBH_PLLC_REFCLKSEL_SHIFT)
+#define USBH_PLLC_CLKSEL_SHIFT 2
+#define USBH_PLLC_CLKSEL_MASK (0x3 << USBH_PLLC_CLKSEL_MASK)
+#define USBH_PLLC_XTAL_PWRDWNB BIT(4)
+#define USBH_PLLC_PLL_PWRDWNB BIT(5)
+#define USBH_PLLC_PLL_CALEN BIT(6)
+#define USBH_PLLC_PHYPLL_BYP BIT(7)
+#define USBH_PLLC_PLL_RESET BIT(8)
+#define USBH_PLLC_PLL_IDDQ_PWRDN BIT(9)
+#define USBH_PLLC_PLL_PWRDN_DELAY BIT(10)
+#define USBH_6318_PLLC_PLL_SUSPEND_EN BIT(27)
+#define USBH_6318_PLLC_PHYPLL_BYP BIT(29)
+#define USBH_6318_PLLC_PLL_RESET BIT(30)
+#define USBH_6318_PLLC_PLL_IDDQ_PWRDN BIT(31)
+ USBH_SWAP_CONTROL,
+#define USBH_SC_OHCI_DATA_SWAP BIT(0)
+#define USBH_SC_OHCI_ENDIAN_SWAP BIT(1)
+#define USBH_SC_OHCI_LOGICAL_ADDR_EN BIT(2)
+#define USBH_SC_EHCI_DATA_SWAP BIT(3)
+#define USBH_SC_EHCI_ENDIAN_SWAP BIT(4)
+#define USBH_SC_EHCI_LOGICAL_ADDR_EN BIT(5)
+#define USBH_SC_USB_DEVICE_SEL BIT(6)
+ USBH_GENERIC_CONTROL,
+#define USBH_GC_PLL_SUSPEND_EN BIT(1)
+ USBH_FRAME_ADJUST_VALUE,
+ USBH_SETUP,
+#define USBH_S_IOC BIT(4)
+#define USBH_S_IPP BIT(5)
+ USBH_MDIO,
+ USBH_MDIO32,
+ USBH_USB_SIM_CONTROL,
+#define USBH_USC_LADDR_SEL BIT(5)
+
+ __USBH_ENUM_SIZE
+};
+
+struct bcm63xx_usbh_phy_variant {
+ /* Registers */
+ long regs[__USBH_ENUM_SIZE];
+
+ /* PLLC bits to set/clear for power on */
+ u32 power_pllc_clr;
+ u32 power_pllc_set;
+
+ /* Setup bits to set/clear for power on */
+ u32 setup_clr;
+ u32 setup_set;
+
+ /* Swap Control bits to set */
+ u32 swapctl_dev_set;
+
+ /* Test Port Control value to set if non-zero */
+ u32 tpc_val;
+
+ /* USB Sim Control bits to set */
+ u32 usc_set;
+
+ /* UTMI Control 1 bits to set */
+ u32 utmictl1_dev_set;
+};
+
+struct bcm63xx_usbh_phy {
+ void __iomem *base;
+ struct clk *usbh_clk;
+ struct clk *usb_ref_clk;
+ struct reset_control *reset;
+ const struct bcm63xx_usbh_phy_variant *variant;
+ bool device_mode;
+};
+
+static const struct bcm63xx_usbh_phy_variant usbh_bcm6318 = {
+ .regs = {
+ [USBH_BRT_CONTROL1] = -1,
+ [USBH_BRT_CONTROL2] = -1,
+ [USBH_BRT_STATUS1] = -1,
+ [USBH_BRT_STATUS2] = -1,
+ [USBH_UTMI_CONTROL1] = 0x2c,
+ [USBH_TEST_PORT_CONTROL] = 0x1c,
+ [USBH_PLL_CONTROL1] = 0x04,
+ [USBH_SWAP_CONTROL] = 0x0c,
+ [USBH_GENERIC_CONTROL] = -1,
+ [USBH_FRAME_ADJUST_VALUE] = 0x08,
+ [USBH_SETUP] = 0x00,
+ [USBH_MDIO] = 0x14,
+ [USBH_MDIO32] = 0x18,
+ [USBH_USB_SIM_CONTROL] = 0x20,
+ },
+ .power_pllc_clr = USBH_6318_PLLC_PLL_IDDQ_PWRDN,
+ .power_pllc_set = USBH_6318_PLLC_PLL_SUSPEND_EN,
+ .setup_set = USBH_S_IOC,
+ .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
+ .usc_set = USBH_USC_LADDR_SEL,
+ .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
+};
+
+static const struct bcm63xx_usbh_phy_variant usbh_bcm6328 = {
+ .regs = {
+ [USBH_BRT_CONTROL1] = 0x00,
+ [USBH_BRT_CONTROL2] = 0x04,
+ [USBH_BRT_STATUS1] = 0x08,
+ [USBH_BRT_STATUS2] = 0x0c,
+ [USBH_UTMI_CONTROL1] = 0x10,
+ [USBH_TEST_PORT_CONTROL] = 0x14,
+ [USBH_PLL_CONTROL1] = 0x18,
+ [USBH_SWAP_CONTROL] = 0x1c,
+ [USBH_GENERIC_CONTROL] = 0x20,
+ [USBH_FRAME_ADJUST_VALUE] = 0x24,
+ [USBH_SETUP] = 0x28,
+ [USBH_MDIO] = 0x2c,
+ [USBH_MDIO32] = 0x30,
+ [USBH_USB_SIM_CONTROL] = 0x34,
+ },
+ .setup_set = USBH_S_IOC,
+ .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
+ .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
+};
+
+static const struct bcm63xx_usbh_phy_variant usbh_bcm6358 = {
+ .regs = {
+ [USBH_BRT_CONTROL1] = -1,
+ [USBH_BRT_CONTROL2] = -1,
+ [USBH_BRT_STATUS1] = -1,
+ [USBH_BRT_STATUS2] = -1,
+ [USBH_UTMI_CONTROL1] = -1,
+ [USBH_TEST_PORT_CONTROL] = 0x24,
+ [USBH_PLL_CONTROL1] = -1,
+ [USBH_SWAP_CONTROL] = 0x00,
+ [USBH_GENERIC_CONTROL] = -1,
+ [USBH_FRAME_ADJUST_VALUE] = -1,
+ [USBH_SETUP] = -1,
+ [USBH_MDIO] = -1,
+ [USBH_MDIO32] = -1,
+ [USBH_USB_SIM_CONTROL] = -1,
+ },
+ /*
+ * The magic value comes for the original vendor BSP
+ * and is needed for USB to work. Datasheet does not
+ * help, so the magic value is used as-is.
+ */
+ .tpc_val = 0x1c0020,
+};
+
+static const struct bcm63xx_usbh_phy_variant usbh_bcm6368 = {
+ .regs = {
+ [USBH_BRT_CONTROL1] = 0x00,
+ [USBH_BRT_CONTROL2] = 0x04,
+ [USBH_BRT_STATUS1] = 0x08,
+ [USBH_BRT_STATUS2] = 0x0c,
+ [USBH_UTMI_CONTROL1] = 0x10,
+ [USBH_TEST_PORT_CONTROL] = 0x14,
+ [USBH_PLL_CONTROL1] = 0x18,
+ [USBH_SWAP_CONTROL] = 0x1c,
+ [USBH_GENERIC_CONTROL] = -1,
+ [USBH_FRAME_ADJUST_VALUE] = 0x24,
+ [USBH_SETUP] = 0x28,
+ [USBH_MDIO] = 0x2c,
+ [USBH_MDIO32] = 0x30,
+ [USBH_USB_SIM_CONTROL] = 0x34,
+ },
+ .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
+ .setup_set = USBH_S_IOC,
+ .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
+ .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
+};
+
+static const struct bcm63xx_usbh_phy_variant usbh_bcm63268 = {
+ .regs = {
+ [USBH_BRT_CONTROL1] = 0x00,
+ [USBH_BRT_CONTROL2] = 0x04,
+ [USBH_BRT_STATUS1] = 0x08,
+ [USBH_BRT_STATUS2] = 0x0c,
+ [USBH_UTMI_CONTROL1] = 0x10,
+ [USBH_TEST_PORT_CONTROL] = 0x14,
+ [USBH_PLL_CONTROL1] = 0x18,
+ [USBH_SWAP_CONTROL] = 0x1c,
+ [USBH_GENERIC_CONTROL] = 0x20,
+ [USBH_FRAME_ADJUST_VALUE] = 0x24,
+ [USBH_SETUP] = 0x28,
+ [USBH_MDIO] = 0x2c,
+ [USBH_MDIO32] = 0x30,
+ [USBH_USB_SIM_CONTROL] = 0x34,
+ },
+ .power_pllc_clr = USBH_PLLC_PLL_IDDQ_PWRDN | USBH_PLLC_PLL_PWRDN_DELAY,
+ .setup_clr = USBH_S_IPP,
+ .setup_set = USBH_S_IOC,
+ .swapctl_dev_set = USBH_SC_USB_DEVICE_SEL,
+ .utmictl1_dev_set = USBH_UC1_DEV_MODE_SEL,
+};
+
+static inline bool usbh_has_reg(struct bcm63xx_usbh_phy *usbh, int reg)
+{
+ return (usbh->variant->regs[reg] >= 0);
+}
+
+static inline u32 usbh_readl(struct bcm63xx_usbh_phy *usbh, int reg)
+{
+ return __raw_readl(usbh->base + usbh->variant->regs[reg]);
+}
+
+static inline void usbh_writel(struct bcm63xx_usbh_phy *usbh, int reg,
+ u32 value)
+{
+ __raw_writel(value, usbh->base + usbh->variant->regs[reg]);
+}
+
+static int bcm63xx_usbh_phy_init(struct phy *phy)
+{
+ struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
+ int ret;
+
+ ret = clk_prepare_enable(usbh->usbh_clk);
+ if (ret) {
+ dev_err(&phy->dev, "unable to enable usbh clock: %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(usbh->usb_ref_clk);
+ if (ret) {
+ dev_err(&phy->dev, "unable to enable usb_ref clock: %d\n", ret);
+ clk_disable_unprepare(usbh->usbh_clk);
+ return ret;
+ }
+
+ ret = reset_control_reset(usbh->reset);
+ if (ret) {
+ dev_err(&phy->dev, "unable to reset device: %d\n", ret);
+ clk_disable_unprepare(usbh->usb_ref_clk);
+ clk_disable_unprepare(usbh->usbh_clk);
+ return ret;
+ }
+
+ /* Configure to work in native CPU endian */
+ if (usbh_has_reg(usbh, USBH_SWAP_CONTROL)) {
+ u32 val = usbh_readl(usbh, USBH_SWAP_CONTROL);
+
+ val |= USBH_SC_EHCI_DATA_SWAP;
+ val &= ~USBH_SC_EHCI_ENDIAN_SWAP;
+
+ val |= USBH_SC_OHCI_DATA_SWAP;
+ val &= ~USBH_SC_OHCI_ENDIAN_SWAP;
+
+ if (usbh->device_mode && usbh->variant->swapctl_dev_set)
+ val |= usbh->variant->swapctl_dev_set;
+
+ usbh_writel(usbh, USBH_SWAP_CONTROL, val);
+ }
+
+ if (usbh_has_reg(usbh, USBH_SETUP)) {
+ u32 val = usbh_readl(usbh, USBH_SETUP);
+
+ val |= usbh->variant->setup_set;
+ val &= ~usbh->variant->setup_clr;
+
+ usbh_writel(usbh, USBH_SETUP, val);
+ }
+
+ if (usbh_has_reg(usbh, USBH_USB_SIM_CONTROL)) {
+ u32 val = usbh_readl(usbh, USBH_USB_SIM_CONTROL);
+
+ val |= usbh->variant->usc_set;
+
+ usbh_writel(usbh, USBH_USB_SIM_CONTROL, val);
+ }
+
+ if (usbh->variant->tpc_val &&
+ usbh_has_reg(usbh, USBH_TEST_PORT_CONTROL))
+ usbh_writel(usbh, USBH_TEST_PORT_CONTROL,
+ usbh->variant->tpc_val);
+
+ if (usbh->device_mode &&
+ usbh_has_reg(usbh, USBH_UTMI_CONTROL1) &&
+ usbh->variant->utmictl1_dev_set) {
+ u32 val = usbh_readl(usbh, USBH_UTMI_CONTROL1);
+
+ val |= usbh->variant->utmictl1_dev_set;
+
+ usbh_writel(usbh, USBH_UTMI_CONTROL1, val);
+ }
+
+ return 0;
+}
+
+static int bcm63xx_usbh_phy_power_on(struct phy *phy)
+{
+ struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
+
+ if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
+ u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
+
+ val |= usbh->variant->power_pllc_set;
+ val &= ~usbh->variant->power_pllc_clr;
+
+ usbh_writel(usbh, USBH_PLL_CONTROL1, val);
+ }
+
+ return 0;
+}
+
+static int bcm63xx_usbh_phy_power_off(struct phy *phy)
+{
+ struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
+
+ if (usbh_has_reg(usbh, USBH_PLL_CONTROL1)) {
+ u32 val = usbh_readl(usbh, USBH_PLL_CONTROL1);
+
+ val &= ~usbh->variant->power_pllc_set;
+ val |= usbh->variant->power_pllc_clr;
+
+ usbh_writel(usbh, USBH_PLL_CONTROL1, val);
+ }
+
+ return 0;
+}
+
+static int bcm63xx_usbh_phy_exit(struct phy *phy)
+{
+ struct bcm63xx_usbh_phy *usbh = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(usbh->usbh_clk);
+ clk_disable_unprepare(usbh->usb_ref_clk);
+
+ return 0;
+}
+
+static const struct phy_ops bcm63xx_usbh_phy_ops = {
+ .exit = bcm63xx_usbh_phy_exit,
+ .init = bcm63xx_usbh_phy_init,
+ .power_off = bcm63xx_usbh_phy_power_off,
+ .power_on = bcm63xx_usbh_phy_power_on,
+ .owner = THIS_MODULE,
+};
+
+static struct phy *bcm63xx_usbh_phy_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct bcm63xx_usbh_phy *usbh = dev_get_drvdata(dev);
+
+ usbh->device_mode = !!args->args[0];
+
+ return of_phy_simple_xlate(dev, args);
+}
+
+static int __init bcm63xx_usbh_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct bcm63xx_usbh_phy *usbh;
+ const struct bcm63xx_usbh_phy_variant *variant;
+ struct phy *phy;
+ struct phy_provider *phy_provider;
+
+ usbh = devm_kzalloc(dev, sizeof(*usbh), GFP_KERNEL);
+ if (!usbh)
+ return -ENOMEM;
+
+ variant = device_get_match_data(dev);
+ if (!variant)
+ return -EINVAL;
+ usbh->variant = variant;
+
+ usbh->base = devm_platform_ioremap_resource(pdev, 0);
+ if (IS_ERR(usbh->base))
+ return PTR_ERR(usbh->base);
+
+ usbh->reset = devm_reset_control_get_exclusive(dev, NULL);
+ if (IS_ERR(usbh->reset)) {
+ if (PTR_ERR(usbh->reset) != -EPROBE_DEFER)
+ dev_err(dev, "failed to get reset\n");
+ return PTR_ERR(usbh->reset);
+ }
+
+ usbh->usbh_clk = devm_clk_get_optional(dev, "usbh");
+ if (IS_ERR(usbh->usbh_clk))
+ return PTR_ERR(usbh->usbh_clk);
+
+ usbh->usb_ref_clk = devm_clk_get_optional(dev, "usb_ref");
+ if (IS_ERR(usbh->usb_ref_clk))
+ return PTR_ERR(usbh->usb_ref_clk);
+
+ phy = devm_phy_create(dev, NULL, &bcm63xx_usbh_phy_ops);
+ if (IS_ERR(phy)) {
+ dev_err(dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ platform_set_drvdata(pdev, usbh);
+ phy_set_drvdata(phy, usbh);
+
+ phy_provider = devm_of_phy_provider_register(dev,
+ bcm63xx_usbh_phy_xlate);
+ if (IS_ERR(phy_provider)) {
+ dev_err(dev, "failed to register PHY provider\n");
+ return PTR_ERR(phy_provider);
+ }
+
+ dev_dbg(dev, "Registered BCM63xx USB PHY driver\n");
+
+ return 0;
+}
+
+static const struct of_device_id bcm63xx_usbh_phy_ids[] __initconst = {
+ { .compatible = "brcm,bcm6318-usbh-phy", .data = &usbh_bcm6318 },
+ { .compatible = "brcm,bcm6328-usbh-phy", .data = &usbh_bcm6328 },
+ { .compatible = "brcm,bcm6358-usbh-phy", .data = &usbh_bcm6358 },
+ { .compatible = "brcm,bcm6362-usbh-phy", .data = &usbh_bcm6368 },
+ { .compatible = "brcm,bcm6368-usbh-phy", .data = &usbh_bcm6368 },
+ { .compatible = "brcm,bcm63268-usbh-phy", .data = &usbh_bcm63268 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, bcm63xx_usbh_phy_ids);
+
+static struct platform_driver bcm63xx_usbh_phy_driver __refdata = {
+ .driver = {
+ .name = "bcm63xx-usbh-phy",
+ .of_match_table = bcm63xx_usbh_phy_ids,
+ },
+ .probe = bcm63xx_usbh_phy_probe,
+};
+module_platform_driver(bcm63xx_usbh_phy_driver);
+
+MODULE_DESCRIPTION("BCM63xx USBH PHY driver");
+MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
+MODULE_AUTHOR("Simon Arlott");
+MODULE_LICENSE("GPL");
diff --git a/drivers/phy/cadence/phy-cadence-salvo.c b/drivers/phy/cadence/phy-cadence-salvo.c
index 1ecbb964cd21..016514e4aa54 100644
--- a/drivers/phy/cadence/phy-cadence-salvo.c
+++ b/drivers/phy/cadence/phy-cadence-salvo.c
@@ -88,7 +88,7 @@
#define TB_ADDR_TX_RCVDETSC_CTRL 0x4124
/* TB_ADDR_TX_RCVDETSC_CTRL */
-#define RXDET_IN_P3_32KHZ BIT(1)
+#define RXDET_IN_P3_32KHZ BIT(0)
struct cdns_reg_pairs {
u16 val;
diff --git a/drivers/phy/marvell/phy-armada38x-comphy.c b/drivers/phy/marvell/phy-armada38x-comphy.c
index 6960dfd8ad8c..0fe408964334 100644
--- a/drivers/phy/marvell/phy-armada38x-comphy.c
+++ b/drivers/phy/marvell/phy-armada38x-comphy.c
@@ -41,6 +41,7 @@ struct a38x_comphy_lane {
struct a38x_comphy {
void __iomem *base;
+ void __iomem *conf;
struct device *dev;
struct a38x_comphy_lane lane[MAX_A38X_COMPHY];
};
@@ -54,6 +55,21 @@ static const u8 gbe_mux[MAX_A38X_COMPHY][MAX_A38X_PORTS] = {
{ 0, 0, 3 },
};
+static void a38x_set_conf(struct a38x_comphy_lane *lane, bool enable)
+{
+ struct a38x_comphy *priv = lane->priv;
+ u32 conf;
+
+ if (priv->conf) {
+ conf = readl_relaxed(priv->conf);
+ if (enable)
+ conf |= BIT(lane->port);
+ else
+ conf &= ~BIT(lane->port);
+ writel(conf, priv->conf);
+ }
+}
+
static void a38x_comphy_set_reg(struct a38x_comphy_lane *lane,
unsigned int offset, u32 mask, u32 value)
{
@@ -97,6 +113,7 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
{
struct a38x_comphy_lane *lane = phy_get_drvdata(phy);
unsigned int gen;
+ int ret;
if (mode != PHY_MODE_ETHERNET)
return -EINVAL;
@@ -115,13 +132,20 @@ static int a38x_comphy_set_mode(struct phy *phy, enum phy_mode mode, int sub)
return -EINVAL;
}
+ a38x_set_conf(lane, false);
+
a38x_comphy_set_speed(lane, gen, gen);
- return a38x_comphy_poll(lane, COMPHY_STAT1,
- COMPHY_STAT1_PLL_RDY_TX |
- COMPHY_STAT1_PLL_RDY_RX,
- COMPHY_STAT1_PLL_RDY_TX |
- COMPHY_STAT1_PLL_RDY_RX);
+ ret = a38x_comphy_poll(lane, COMPHY_STAT1,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX,
+ COMPHY_STAT1_PLL_RDY_TX |
+ COMPHY_STAT1_PLL_RDY_RX);
+
+ if (ret == 0)
+ a38x_set_conf(lane, true);
+
+ return ret;
}
static const struct phy_ops a38x_comphy_ops = {
@@ -174,14 +198,21 @@ static int a38x_comphy_probe(struct platform_device *pdev)
if (!priv)
return -ENOMEM;
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- base = devm_ioremap_resource(&pdev->dev, res);
+ base = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(base))
return PTR_ERR(base);
priv->dev = &pdev->dev;
priv->base = base;
+ /* Optional */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "conf");
+ if (res) {
+ priv->conf = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->conf))
+ return PTR_ERR(priv->conf);
+ }
+
for_each_available_child_of_node(pdev->dev.of_node, child) {
struct phy *phy;
int ret;
diff --git a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
index 23bc3bf5c4c0..8834436bc9db 100644
--- a/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
+++ b/drivers/phy/marvell/phy-mvebu-a3700-utmi.c
@@ -72,7 +72,7 @@ struct mvebu_a3700_utmi_caps {
* struct mvebu_a3700_utmi - PHY driver data
*
* @regs: PHY registers
- * @usb_mis: Regmap with USB miscellaneous registers including PHY ones
+ * @usb_misc: Regmap with USB miscellaneous registers including PHY ones
* @caps: PHY capabilities
* @phy: PHY handle
*/
diff --git a/drivers/phy/motorola/phy-mapphone-mdm6600.c b/drivers/phy/motorola/phy-mapphone-mdm6600.c
index 94a34cf75eb3..5172971f4c36 100644
--- a/drivers/phy/motorola/phy-mapphone-mdm6600.c
+++ b/drivers/phy/motorola/phy-mapphone-mdm6600.c
@@ -178,6 +178,7 @@ static const struct phy_ops gpio_usb_ops = {
/**
* phy_mdm6600_cmd() - send a command request to mdm6600
* @ddata: device driver data
+ * @val: value of cmd to be set
*
* Configures the three command request GPIOs to the specified value.
*/
@@ -194,7 +195,7 @@ static void phy_mdm6600_cmd(struct phy_mdm6600 *ddata, int val)
/**
* phy_mdm6600_status() - read mdm6600 status lines
- * @ddata: device driver data
+ * @work: work structure
*/
static void phy_mdm6600_status(struct work_struct *work)
{
diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c
index a27b8d578d7f..71cb10826326 100644
--- a/drivers/phy/phy-core.c
+++ b/drivers/phy/phy-core.c
@@ -1062,6 +1062,7 @@ EXPORT_SYMBOL_GPL(__of_phy_provider_register);
* __devm_of_phy_provider_register() - create/register phy provider with the
* framework
* @dev: struct device of the phy provider
+ * @children: device node containing children (if different from dev->of_node)
* @owner: the module owner containing of_xlate
* @of_xlate: function pointer to obtain phy instance from phy provider
*
@@ -1117,12 +1118,14 @@ EXPORT_SYMBOL_GPL(of_phy_provider_unregister);
/**
* devm_of_phy_provider_unregister() - remove phy provider from the framework
* @dev: struct device of the phy provider
+ * @phy_provider: phy provider returned by of_phy_provider_register()
*
* destroys the devres associated with this phy provider and invokes
* of_phy_provider_unregister to unregister the phy provider.
*/
void devm_of_phy_provider_unregister(struct device *dev,
- struct phy_provider *phy_provider) {
+ struct phy_provider *phy_provider)
+{
int r;
r = devres_destroy(dev, devm_phy_provider_release, devm_phy_match,
diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c
index 7a33ec12f71b..b88922e7de1d 100644
--- a/drivers/phy/phy-xgene.c
+++ b/drivers/phy/phy-xgene.c
@@ -1615,7 +1615,7 @@ static struct phy *xgene_phy_xlate(struct device *dev,
if (args->args_count <= 0)
return ERR_PTR(-EINVAL);
- if (args->args[0] < MODE_SATA || args->args[0] >= MODE_MAX)
+ if (args->args[0] >= MODE_MAX)
return ERR_PTR(-EINVAL);
ctx->mode = args->args[0];
diff --git a/drivers/phy/qualcomm/Kconfig b/drivers/phy/qualcomm/Kconfig
index ca9ce7e84a5c..928db510b86c 100644
--- a/drivers/phy/qualcomm/Kconfig
+++ b/drivers/phy/qualcomm/Kconfig
@@ -59,30 +59,6 @@ config PHY_QCOM_QUSB2
PHY which is usually paired with either the ChipIdea or Synopsys DWC3
USB IPs on MSM SOCs.
-config PHY_QCOM_UFS
- tristate "Qualcomm UFS PHY driver"
- depends on OF && ARCH_QCOM
- select GENERIC_PHY
- help
- Support for UFS PHY on QCOM chipsets.
-
-if PHY_QCOM_UFS
-
-config PHY_QCOM_UFS_14NM
- tristate
- default PHY_QCOM_UFS
- help
- Support for 14nm UFS QMP phy present on QCOM chipsets.
-
-config PHY_QCOM_UFS_20NM
- tristate
- default PHY_QCOM_UFS
- depends on BROKEN
- help
- Support for 20nm UFS QMP phy present on QCOM chipsets.
-
-endif
-
config PHY_QCOM_USB_HS
tristate "Qualcomm USB HS PHY module"
depends on USB_ULPI_BUS
@@ -128,3 +104,13 @@ config PHY_QCOM_USB_SS
help
Enable this to support the Super-Speed USB transceiver on various
Qualcomm chipsets.
+
+config PHY_QCOM_IPQ806X_USB
+ tristate "Qualcomm IPQ806x DWC3 USB PHY driver"
+ depends on HAS_IOMEM
+ depends on OF && (ARCH_QCOM || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ This option enables support for the Synopsis PHYs present inside the
+ Qualcomm USB3.0 DWC3 controller on ipq806x SoC. This driver supports
+ both HS and SS PHY controllers.
diff --git a/drivers/phy/qualcomm/Makefile b/drivers/phy/qualcomm/Makefile
index 86fb32efab79..47acbd7daa3a 100644
--- a/drivers/phy/qualcomm/Makefile
+++ b/drivers/phy/qualcomm/Makefile
@@ -6,11 +6,9 @@ obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
obj-$(CONFIG_PHY_QCOM_QMP) += phy-qcom-qmp.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
-obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
-obj-$(CONFIG_PHY_QCOM_UFS_14NM) += phy-qcom-ufs-qmp-14nm.o
-obj-$(CONFIG_PHY_QCOM_UFS_20NM) += phy-qcom-ufs-qmp-20nm.o
obj-$(CONFIG_PHY_QCOM_USB_HS) += phy-qcom-usb-hs.o
obj-$(CONFIG_PHY_QCOM_USB_HSIC) += phy-qcom-usb-hsic.o
obj-$(CONFIG_PHY_QCOM_USB_HS_28NM) += phy-qcom-usb-hs-28nm.o
obj-$(CONFIG_PHY_QCOM_USB_SS) += phy-qcom-usb-ss.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2)+= phy-qcom-snps-femto-v2.o
+obj-$(CONFIG_PHY_QCOM_IPQ806X_USB) += phy-qcom-ipq806x-usb.o
diff --git a/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
new file mode 100644
index 000000000000..71f257b4a7f5
--- /dev/null
+++ b/drivers/phy/qualcomm/phy-qcom-ipq806x-usb.c
@@ -0,0 +1,571 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+
+/* USB QSCRATCH Hardware registers */
+#define QSCRATCH_GENERAL_CFG (0x08)
+#define HSUSB_PHY_CTRL_REG (0x10)
+
+/* PHY_CTRL_REG */
+#define HSUSB_CTRL_DMSEHV_CLAMP BIT(24)
+#define HSUSB_CTRL_USB2_SUSPEND BIT(23)
+#define HSUSB_CTRL_UTMI_CLK_EN BIT(21)
+#define HSUSB_CTRL_UTMI_OTG_VBUS_VALID BIT(20)
+#define HSUSB_CTRL_USE_CLKCORE BIT(18)
+#define HSUSB_CTRL_DPSEHV_CLAMP BIT(17)
+#define HSUSB_CTRL_COMMONONN BIT(11)
+#define HSUSB_CTRL_ID_HV_CLAMP BIT(9)
+#define HSUSB_CTRL_OTGSESSVLD_CLAMP BIT(8)
+#define HSUSB_CTRL_CLAMP_EN BIT(7)
+#define HSUSB_CTRL_RETENABLEN BIT(1)
+#define HSUSB_CTRL_POR BIT(0)
+
+/* QSCRATCH_GENERAL_CFG */
+#define HSUSB_GCFG_XHCI_REV BIT(2)
+
+/* USB QSCRATCH Hardware registers */
+#define SSUSB_PHY_CTRL_REG (0x00)
+#define SSUSB_PHY_PARAM_CTRL_1 (0x04)
+#define SSUSB_PHY_PARAM_CTRL_2 (0x08)
+#define CR_PROTOCOL_DATA_IN_REG (0x0c)
+#define CR_PROTOCOL_DATA_OUT_REG (0x10)
+#define CR_PROTOCOL_CAP_ADDR_REG (0x14)
+#define CR_PROTOCOL_CAP_DATA_REG (0x18)
+#define CR_PROTOCOL_READ_REG (0x1c)
+#define CR_PROTOCOL_WRITE_REG (0x20)
+
+/* PHY_CTRL_REG */
+#define SSUSB_CTRL_REF_USE_PAD BIT(28)
+#define SSUSB_CTRL_TEST_POWERDOWN BIT(27)
+#define SSUSB_CTRL_LANE0_PWR_PRESENT BIT(24)
+#define SSUSB_CTRL_SS_PHY_EN BIT(8)
+#define SSUSB_CTRL_SS_PHY_RESET BIT(7)
+
+/* SSPHY control registers - Does this need 0x30? */
+#define SSPHY_CTRL_RX_OVRD_IN_HI(lane) (0x1006 + 0x100 * (lane))
+#define SSPHY_CTRL_TX_OVRD_DRV_LO(lane) (0x1002 + 0x100 * (lane))
+
+/* SSPHY SoC version specific values */
+#define SSPHY_RX_EQ_VALUE 4 /* Override value for rx_eq */
+/* Override value for transmit preemphasis */
+#define SSPHY_TX_DEEMPH_3_5DB 23
+/* Override value for mpll */
+#define SSPHY_MPLL_VALUE 0
+
+/* QSCRATCH PHY_PARAM_CTRL1 fields */
+#define PHY_PARAM_CTRL1_TX_FULL_SWING_MASK GENMASK(26, 19)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK GENMASK(19, 13)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK GENMASK(13, 7)
+#define PHY_PARAM_CTRL1_LOS_BIAS_MASK GENMASK(7, 2)
+
+#define PHY_PARAM_CTRL1_MASK \
+ (PHY_PARAM_CTRL1_TX_FULL_SWING_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK | \
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK | \
+ PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+#define PHY_PARAM_CTRL1_TX_FULL_SWING(x) \
+ (((x) << 20) & PHY_PARAM_CTRL1_TX_FULL_SWING_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_6DB(x) \
+ (((x) << 14) & PHY_PARAM_CTRL1_TX_DEEMPH_6DB_MASK)
+#define PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(x) \
+ (((x) << 8) & PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB_MASK)
+#define PHY_PARAM_CTRL1_LOS_BIAS(x) \
+ (((x) << 3) & PHY_PARAM_CTRL1_LOS_BIAS_MASK)
+
+/* RX OVRD IN HI bits */
+#define RX_OVRD_IN_HI_RX_RESET_OVRD BIT(13)
+#define RX_OVRD_IN_HI_RX_RX_RESET BIT(12)
+#define RX_OVRD_IN_HI_RX_EQ_OVRD BIT(11)
+#define RX_OVRD_IN_HI_RX_EQ_MASK GENMASK(10, 7)
+#define RX_OVRD_IN_HI_RX_EQ(x) ((x) << 8)
+#define RX_OVRD_IN_HI_RX_EQ_EN_OVRD BIT(7)
+#define RX_OVRD_IN_HI_RX_EQ_EN BIT(6)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_OVRD BIT(5)
+#define RX_OVRD_IN_HI_RX_LOS_FILTER_MASK GENMASK(4, 2)
+#define RX_OVRD_IN_HI_RX_RATE_OVRD BIT(2)
+#define RX_OVRD_IN_HI_RX_RATE_MASK GENMASK(2, 0)
+
+/* TX OVRD DRV LO register bits */
+#define TX_OVRD_DRV_LO_AMPLITUDE_MASK GENMASK(6, 0)
+#define TX_OVRD_DRV_LO_PREEMPH_MASK GENMASK(13, 6)
+#define TX_OVRD_DRV_LO_PREEMPH(x) ((x) << 7)
+#define TX_OVRD_DRV_LO_EN BIT(14)
+
+/* MPLL bits */
+#define SSPHY_MPLL_MASK GENMASK(8, 5)
+#define SSPHY_MPLL(x) ((x) << 5)
+
+/* SS CAP register bits */
+#define SS_CR_CAP_ADDR_REG BIT(0)
+#define SS_CR_CAP_DATA_REG BIT(0)
+#define SS_CR_READ_REG BIT(0)
+#define SS_CR_WRITE_REG BIT(0)
+
+struct usb_phy {
+ void __iomem *base;
+ struct device *dev;
+ struct clk *xo_clk;
+ struct clk *ref_clk;
+ u32 rx_eq;
+ u32 tx_deamp_3_5db;
+ u32 mpll;
+};
+
+struct phy_drvdata {
+ struct phy_ops ops;
+ u32 clk_rate;
+};
+
+/**
+ * Write register and read back masked value to confirm it is written
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @offset - register offset.
+ * @mask - register bitmask specifying what should be updated
+ * @val - value to write.
+ */
+static inline void usb_phy_write_readback(struct usb_phy *phy_dwc3,
+ u32 offset,
+ const u32 mask, u32 val)
+{
+ u32 write_val, tmp = readl(phy_dwc3->base + offset);
+
+ tmp &= ~mask; /* retain other bits */
+ write_val = tmp | val;
+
+ writel(write_val, phy_dwc3->base + offset);
+
+ /* Read back to see if val was written */
+ tmp = readl(phy_dwc3->base + offset);
+ tmp &= mask; /* clear other bits */
+
+ if (tmp != val)
+ dev_err(phy_dwc3->dev, "write: %x to QSCRATCH: %x FAILED\n", val, offset);
+}
+
+static int wait_for_latch(void __iomem *addr)
+{
+ u32 retry = 10;
+
+ while (true) {
+ if (!readl(addr))
+ break;
+
+ if (--retry == 0)
+ return -ETIMEDOUT;
+
+ usleep_range(10, 20);
+ }
+
+ return 0;
+}
+
+/**
+ * Write SSPHY register
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to write.
+ * @val - value to write.
+ */
+static int usb_ss_write_phycreg(struct usb_phy *phy_dwc3,
+ u32 addr, u32 val)
+{
+ int ret;
+
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(val, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_DATA_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_DATA_REG);
+ if (ret)
+ goto err_wait;
+
+ writel(SS_CR_WRITE_REG, phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_WRITE_REG);
+
+err_wait:
+ if (ret)
+ dev_err(phy_dwc3->dev, "timeout waiting for latch\n");
+ return ret;
+}
+
+/**
+ * Read SSPHY register.
+ *
+ * @base - QCOM DWC3 PHY base virtual address.
+ * @addr - SSPHY address to read.
+ */
+static int usb_ss_read_phycreg(struct usb_phy *phy_dwc3,
+ u32 addr, u32 *val)
+{
+ int ret;
+
+ writel(addr, phy_dwc3->base + CR_PROTOCOL_DATA_IN_REG);
+ writel(SS_CR_CAP_ADDR_REG,
+ phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_CAP_ADDR_REG);
+ if (ret)
+ goto err_wait;
+
+ /*
+ * Due to hardware bug, first read of SSPHY register might be
+ * incorrect. Hence as workaround, SW should perform SSPHY register
+ * read twice, but use only second read and ignore first read.
+ */
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ /* throwaway read */
+ readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
+
+ writel(SS_CR_READ_REG, phy_dwc3->base + CR_PROTOCOL_READ_REG);
+
+ ret = wait_for_latch(phy_dwc3->base + CR_PROTOCOL_READ_REG);
+ if (ret)
+ goto err_wait;
+
+ *val = readl(phy_dwc3->base + CR_PROTOCOL_DATA_OUT_REG);
+
+err_wait:
+ return ret;
+}
+
+static int qcom_ipq806x_usb_hs_phy_init(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 val;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /*
+ * HSPHY Initialization: Enable UTMI clock, select 19.2MHz fsel
+ * enable clamping, and disable RETENTION (power-on default is ENABLED)
+ */
+ val = HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_DMSEHV_CLAMP |
+ HSUSB_CTRL_RETENABLEN | HSUSB_CTRL_COMMONONN |
+ HSUSB_CTRL_OTGSESSVLD_CLAMP | HSUSB_CTRL_ID_HV_CLAMP |
+ HSUSB_CTRL_DPSEHV_CLAMP | HSUSB_CTRL_UTMI_OTG_VBUS_VALID |
+ HSUSB_CTRL_UTMI_CLK_EN | HSUSB_CTRL_CLAMP_EN | 0x70;
+
+ /* use core clock if external reference is not present */
+ if (!phy_dwc3->xo_clk)
+ val |= HSUSB_CTRL_USE_CLKCORE;
+
+ writel(val, phy_dwc3->base + HSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+
+ /* Disable (bypass) VBUS and ID filters */
+ writel(HSUSB_GCFG_XHCI_REV, phy_dwc3->base + QSCRATCH_GENERAL_CFG);
+
+ return 0;
+}
+
+static int qcom_ipq806x_usb_hs_phy_exit(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static int qcom_ipq806x_usb_ss_phy_init(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+ int ret;
+ u32 data;
+
+ ret = clk_prepare_enable(phy_dwc3->xo_clk);
+ if (ret)
+ return ret;
+
+ ret = clk_prepare_enable(phy_dwc3->ref_clk);
+ if (ret) {
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+ return ret;
+ }
+
+ /* reset phy */
+ data = readl(phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ writel(data | SSUSB_CTRL_SS_PHY_RESET,
+ phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+ usleep_range(2000, 2200);
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* clear REF_PAD if we don't have XO clk */
+ if (!phy_dwc3->xo_clk)
+ data &= ~SSUSB_CTRL_REF_USE_PAD;
+ else
+ data |= SSUSB_CTRL_REF_USE_PAD;
+
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /* wait for ref clk to become stable, this can take up to 30ms */
+ msleep(30);
+
+ data |= SSUSB_CTRL_SS_PHY_EN | SSUSB_CTRL_LANE0_PWR_PRESENT;
+ writel(data, phy_dwc3->base + SSUSB_PHY_CTRL_REG);
+
+ /*
+ * WORKAROUND: There is SSPHY suspend bug due to which USB enumerates
+ * in HS mode instead of SS mode. Workaround it by asserting
+ * LANE0.TX_ALT_BLOCK.EN_ALT_BUS to enable TX to use alt bus mode
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x102D, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data |= (1 << 7);
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x102D, data);
+ if (ret)
+ goto err_phy_trans;
+
+ ret = usb_ss_read_phycreg(phy_dwc3, 0x1010, &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~0xff0;
+ data |= 0x20;
+ ret = usb_ss_write_phycreg(phy_dwc3, 0x1010, data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Fix RX Equalization setting as follows
+ * LANE0.RX_OVRD_IN_HI. RX_EQ_EN set to 0
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_EN_OVRD set to 1
+ * LANE0.RX_OVRD_IN_HI.RX_EQ set based on SoC version
+ * LANE0.RX_OVRD_IN_HI.RX_EQ_OVRD set to 1
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3, SSPHY_CTRL_RX_OVRD_IN_HI(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~RX_OVRD_IN_HI_RX_EQ_EN;
+ data |= RX_OVRD_IN_HI_RX_EQ_EN_OVRD;
+ data &= ~RX_OVRD_IN_HI_RX_EQ_MASK;
+ data |= RX_OVRD_IN_HI_RX_EQ(phy_dwc3->rx_eq);
+ data |= RX_OVRD_IN_HI_RX_EQ_OVRD;
+ ret = usb_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_RX_OVRD_IN_HI(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ /*
+ * Set EQ and TX launch amplitudes as follows
+ * LANE0.TX_OVRD_DRV_LO.PREEMPH set based on SoC version
+ * LANE0.TX_OVRD_DRV_LO.AMPLITUDE set to 110
+ * LANE0.TX_OVRD_DRV_LO.EN set to 1.
+ */
+ ret = usb_ss_read_phycreg(phy_dwc3,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), &data);
+ if (ret)
+ goto err_phy_trans;
+
+ data &= ~TX_OVRD_DRV_LO_PREEMPH_MASK;
+ data |= TX_OVRD_DRV_LO_PREEMPH(phy_dwc3->tx_deamp_3_5db);
+ data &= ~TX_OVRD_DRV_LO_AMPLITUDE_MASK;
+ data |= 0x6E;
+ data |= TX_OVRD_DRV_LO_EN;
+ ret = usb_ss_write_phycreg(phy_dwc3,
+ SSPHY_CTRL_TX_OVRD_DRV_LO(0), data);
+ if (ret)
+ goto err_phy_trans;
+
+ data = 0;
+ data &= ~SSPHY_MPLL_MASK;
+ data |= SSPHY_MPLL(phy_dwc3->mpll);
+ usb_ss_write_phycreg(phy_dwc3, 0x30, data);
+
+ /*
+ * Set the QSCRATCH PHY_PARAM_CTRL1 parameters as follows
+ * TX_FULL_SWING [26:20] amplitude to 110
+ * TX_DEEMPH_6DB [19:14] to 32
+ * TX_DEEMPH_3_5DB [13:8] set based on SoC version
+ * LOS_BIAS [7:3] to 9
+ */
+ data = readl(phy_dwc3->base + SSUSB_PHY_PARAM_CTRL_1);
+
+ data &= ~PHY_PARAM_CTRL1_MASK;
+
+ data |= PHY_PARAM_CTRL1_TX_FULL_SWING(0x6e) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_6DB(0x20) |
+ PHY_PARAM_CTRL1_TX_DEEMPH_3_5DB(phy_dwc3->tx_deamp_3_5db) |
+ PHY_PARAM_CTRL1_LOS_BIAS(0x9);
+
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_PARAM_CTRL_1,
+ PHY_PARAM_CTRL1_MASK, data);
+
+err_phy_trans:
+ return ret;
+}
+
+static int qcom_ipq806x_usb_ss_phy_exit(struct phy *phy)
+{
+ struct usb_phy *phy_dwc3 = phy_get_drvdata(phy);
+
+ /* Sequence to put SSPHY in low power state:
+ * 1. Clear REF_PHY_EN in PHY_CTRL_REG
+ * 2. Clear REF_USE_PAD in PHY_CTRL_REG
+ * 3. Set TEST_POWERED_DOWN in PHY_CTRL_REG to enable PHY retention
+ */
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_SS_PHY_EN, 0x0);
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_REF_USE_PAD, 0x0);
+ usb_phy_write_readback(phy_dwc3, SSUSB_PHY_CTRL_REG,
+ SSUSB_CTRL_TEST_POWERDOWN, 0x0);
+
+ clk_disable_unprepare(phy_dwc3->ref_clk);
+ clk_disable_unprepare(phy_dwc3->xo_clk);
+
+ return 0;
+}
+
+static const struct phy_drvdata qcom_ipq806x_usb_hs_drvdata = {
+ .ops = {
+ .init = qcom_ipq806x_usb_hs_phy_init,
+ .exit = qcom_ipq806x_usb_hs_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 60000000,
+};
+
+static const struct phy_drvdata qcom_ipq806x_usb_ss_drvdata = {
+ .ops = {
+ .init = qcom_ipq806x_usb_ss_phy_init,
+ .exit = qcom_ipq806x_usb_ss_phy_exit,
+ .owner = THIS_MODULE,
+ },
+ .clk_rate = 125000000,
+};
+
+static const struct of_device_id qcom_ipq806x_usb_phy_table[] = {
+ { .compatible = "qcom,ipq806x-usb-phy-hs",
+ .data = &qcom_ipq806x_usb_hs_drvdata },
+ { .compatible = "qcom,ipq806x-usb-phy-ss",
+ .data = &qcom_ipq806x_usb_ss_drvdata },
+ { /* Sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_ipq806x_usb_phy_table);
+
+static int qcom_ipq806x_usb_phy_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ resource_size_t size;
+ struct phy *generic_phy;
+ struct usb_phy *phy_dwc3;
+ const struct phy_drvdata *data;
+ struct phy_provider *phy_provider;
+
+ phy_dwc3 = devm_kzalloc(&pdev->dev, sizeof(*phy_dwc3), GFP_KERNEL);
+ if (!phy_dwc3)
+ return -ENOMEM;
+
+ data = of_device_get_match_data(&pdev->dev);
+
+ phy_dwc3->dev = &pdev->dev;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ return -EINVAL;
+ size = resource_size(res);
+ phy_dwc3->base = devm_ioremap(phy_dwc3->dev, res->start, size);
+
+ if (IS_ERR(phy_dwc3->base)) {
+ dev_err(phy_dwc3->dev, "failed to map reg\n");
+ return PTR_ERR(phy_dwc3->base);
+ }
+
+ phy_dwc3->ref_clk = devm_clk_get(phy_dwc3->dev, "ref");
+ if (IS_ERR(phy_dwc3->ref_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get reference clock\n");
+ return PTR_ERR(phy_dwc3->ref_clk);
+ }
+
+ clk_set_rate(phy_dwc3->ref_clk, data->clk_rate);
+
+ phy_dwc3->xo_clk = devm_clk_get(phy_dwc3->dev, "xo");
+ if (IS_ERR(phy_dwc3->xo_clk)) {
+ dev_dbg(phy_dwc3->dev, "cannot get TCXO clock\n");
+ phy_dwc3->xo_clk = NULL;
+ }
+
+ /* Parse device node to probe HSIO settings */
+ if (device_property_read_u32(&pdev->dev, "qcom,rx-eq",
+ &phy_dwc3->rx_eq))
+ phy_dwc3->rx_eq = SSPHY_RX_EQ_VALUE;
+
+ if (device_property_read_u32(&pdev->dev, "qcom,tx-deamp_3_5db",
+ &phy_dwc3->tx_deamp_3_5db))
+ phy_dwc3->tx_deamp_3_5db = SSPHY_TX_DEEMPH_3_5DB;
+
+ if (device_property_read_u32(&pdev->dev, "qcom,mpll", &phy_dwc3->mpll))
+ phy_dwc3->mpll = SSPHY_MPLL_VALUE;
+
+ generic_phy = devm_phy_create(phy_dwc3->dev, pdev->dev.of_node, &data->ops);
+
+ if (IS_ERR(generic_phy))
+ return PTR_ERR(generic_phy);
+
+ phy_set_drvdata(generic_phy, phy_dwc3);
+ platform_set_drvdata(pdev, phy_dwc3);
+
+ phy_provider = devm_of_phy_provider_register(phy_dwc3->dev,
+ of_phy_simple_xlate);
+
+ if (IS_ERR(phy_provider))
+ return PTR_ERR(phy_provider);
+
+ return 0;
+}
+
+static struct platform_driver qcom_ipq806x_usb_phy_driver = {
+ .probe = qcom_ipq806x_usb_phy_probe,
+ .driver = {
+ .name = "qcom-ipq806x-usb-phy",
+ .owner = THIS_MODULE,
+ .of_match_table = qcom_ipq806x_usb_phy_table,
+ },
+};
+
+module_platform_driver(qcom_ipq806x_usb_phy_driver);
+
+MODULE_ALIAS("platform:phy-qcom-ipq806x-usb");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Andy Gross <agross@codeaurora.org>");
+MODULE_AUTHOR("Ivan T. Ivanov <iivanov@mm-sol.com>");
+MODULE_DESCRIPTION("DesignWare USB3 QCOM PHY driver");
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c b/drivers/phy/qualcomm/phy-qcom-qmp.c
index e91040af3394..562053ce9455 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -82,20 +82,34 @@ struct qmp_phy_init_tbl {
* register part of layout ?
* if yes, then offset gives index in the reg-layout
*/
- int in_layout;
+ bool in_layout;
+ /*
+ * mask of lanes for which this register is written
+ * for cases when second lane needs different values
+ */
+ u8 lane_mask;
};
#define QMP_PHY_INIT_CFG(o, v) \
{ \
.offset = o, \
.val = v, \
+ .lane_mask = 0xff, \
}
#define QMP_PHY_INIT_CFG_L(o, v) \
{ \
.offset = o, \
.val = v, \
- .in_layout = 1, \
+ .in_layout = true, \
+ .lane_mask = 0xff, \
+ }
+
+#define QMP_PHY_INIT_CFG_LANE(o, v, l) \
+ { \
+ .offset = o, \
+ .val = v, \
+ .lane_mask = l, \
}
/* set of registers with offsets different per-PHY */
@@ -185,6 +199,17 @@ static const unsigned int qmp_v4_usb3phy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_START_CTRL] = 0x44,
[QPHY_PCS_STATUS] = 0x14,
[QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x308,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x314,
+};
+
+static const unsigned int qmp_v4_usb3_uniphy_regs_layout[QPHY_LAYOUT_SIZE] = {
+ [QPHY_SW_RESET] = 0x00,
+ [QPHY_START_CTRL] = 0x44,
+ [QPHY_PCS_STATUS] = 0x14,
+ [QPHY_PCS_POWER_DOWN_CONTROL] = 0x40,
+ [QPHY_PCS_AUTONOMOUS_MODE_CTRL] = 0x608,
+ [QPHY_PCS_LFPS_RXTERM_IRQ_CLEAR] = 0x614,
};
static const unsigned int sdm845_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
@@ -198,6 +223,81 @@ static const unsigned int sm8150_ufsphy_regs_layout[QPHY_LAYOUT_SIZE] = {
[QPHY_SW_RESET] = QPHY_V4_PCS_UFS_SW_RESET,
};
+static const struct qmp_phy_init_tbl ipq8074_usb3_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TRIM, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SVS_MODE_CLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SYS_CLK_CTRL, 0x06),
+ /* PLL and Loop filter settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x55),
+ QMP_PHY_INIT_CFG(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
+ QMP_PHY_INIT_CFG(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP1_MODE0, 0x15),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_LOCK_CMP_CFG, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_VCO_TUNE_MAP, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_BG_TIMER, 0x0a),
+ /* SSC settings */
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_ADJ_PER2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_COM_SSC_STEP_SIZE2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4c),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_CNTRL, 0x03),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_RX_SIGDET_ENABLES, 0x0),
+};
+
+static const struct qmp_phy_init_tbl ipq8074_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x15),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0e),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL2, 0x83),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNTRL1, 0x02),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_L, 0x09),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_CNT_VAL_H_TOL, 0xa2),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_FLL_MAN_CODE, 0x85),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG1, 0xd1),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG2, 0x1f),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LOCK_DETECT_CONFIG3, 0x47),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_STATE_CONFIG2, 0x1b),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_WAIT_TIME, 0x75),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_LFPS_TX_ECSTART_EQTLOCK, 0x86),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_PWRUP_RESET_DLY_TIME_AUXCLK, 0x04),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TSYNC_RSYNC_TIME, 0x44),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_L, 0x40),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RCVR_DTCT_DLY_U3_H, 0x00),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_RX_SIGDET_LVL, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M6DB_V0, 0x17),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_TXDEEMPH_M3P5DB_V0, 0x0f),
+};
+
static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -1399,6 +1499,250 @@ static const struct qmp_phy_init_tbl sm8150_usb3_pcs_tbl[] = {
QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
};
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_EN_SEL, 0x1a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_HSCLK_SEL, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE0, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE0, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE0, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE0, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE0, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE0, 0x14),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP_EN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SYSCLK_BUF_ENABLE, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE2_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE1_MODE1, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CORECLK_DIV_MODE1, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DEC_START_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START1_MODE1, 0xab),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START2_MODE1, 0xea),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_DIV_FRAC_START3_MODE1, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP2_MODE1, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_LOCK_CMP1_MODE1, 0x34),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xca),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_CMN_IPTRIM, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_EN_CENTER, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER1, 0x31),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_PER2, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE1, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE1, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE1_MODE0, 0xde),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_SSC_STEP_SIZE2_MODE0, 0x07),
+ QMP_PHY_INIT_CFG(QSERDES_V4_COM_VCO_TUNE_MAP, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0x95),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x05),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x37),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0xef),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb3),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8150_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xaa),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0f),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_TX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_RX, 0x60),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x40, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_TX_PI_QEC_CTRL, 0x54, 2),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x77),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0xff, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f, 2),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f, 1),
+ QMP_PHY_INIT_CFG_LANE(QSERDES_V4_RX_RX_MODE_00_HIGH, 0xff, 2),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0x97),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_AUX_DATA_TCOARSE_TFINE, 0xa0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VTH_CODE, 0x10),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_RXEQTRAINING_DFE_TIME_S2, 0x07),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RCV_DETECT_LVL_2, 0x12),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_1, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_LANE_MODE_2, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_PI_QEC_CTRL, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX, 0x11),
+ QMP_PHY_INIT_CFG(QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX, 0x02),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH4, 0xb8),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH3, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH2, 0xbf),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_HIGH, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_00_LOW, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH4, 0xb4),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH3, 0x7b),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH2, 0x5c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_HIGH, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_MODE_01_LOW, 0xdc),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_PI_CONTROLS, 0x99),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH1, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_THRESH2, 0x08),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN1, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SB2_GAIN2, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_FO_GAIN, 0x2f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_LOW, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FASTLOCK_COUNT_HIGH, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x7f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_FO_GAIN, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL1, 0x54),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_VGA_CAL_CNTRL2, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL3, 0x4a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQU_ADAPTOR_CNTRL4, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_EN_TIMER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x47),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_OFFSET_ADAPTOR_CNTRL2, 0x80),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_CNTRL, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_SIGDET_DEGLITCH_CNTRL, 0x0e),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_HIGH, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_RX_IDAC_TSETTLE_LOW, 0xc0),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DFE_CTLE_POST_CAL_OFFSET, 0x38),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_UCDR_SO_GAIN, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_DCC_CTRL1, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V4_RX_GM_CAL, 0x1f),
+};
+
+static const struct qmp_phy_init_tbl sm8250_usb3_uniphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG1, 0xd0),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG3, 0x20),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_LOCK_DETECT_CONFIG6, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_L, 0xe7),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RCVR_DTCT_DLY_P1U2_H, 0x03),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_RX_SIGDET_LVL, 0xa9),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_PCS_TX_RX_CONFIG, 0x0c),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2, 0x07),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL, 0xf8),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_CDR_RESET_TIME, 0x0a),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG1, 0x88),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_ALIGN_DETECT_CONFIG2, 0x13),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG1, 0x4b),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_EQ_CONFIG5, 0x10),
+ QMP_PHY_INIT_CFG(QPHY_V4_PCS_REFGEN_REQ_CONFIG1, 0x21),
+};
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -1567,6 +1911,11 @@ static const char * const qmp_v4_phy_clk_l[] = {
"aux", "ref_clk_src", "ref", "com_aux",
};
+/* the primary usb3 phy on sm8250 doesn't have a ref clock */
+static const char * const qmp_v4_sm8250_usbphy_clk_l[] = {
+ "aux", "ref_clk_src", "com_aux"
+};
+
static const char * const sdm845_ufs_phy_clk_l[] = {
"ref", "ref_aux",
};
@@ -1593,6 +1942,30 @@ static const char * const qmp_phy_vreg_l[] = {
"vdda-phy", "vdda-pll",
};
+static const struct qmp_phy_cfg ipq8074_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = ipq8074_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(ipq8074_usb3_serdes_tbl),
+ .tx_tbl = msm8996_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(msm8996_usb3_tx_tbl),
+ .rx_tbl = ipq8074_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(ipq8074_usb3_rx_tbl),
+ .pcs_tbl = ipq8074_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(ipq8074_usb3_pcs_tbl),
+ .clk_list = msm8996_phy_clk_l,
+ .num_clks = ARRAY_SIZE(msm8996_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+};
+
static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
.type = PHY_TYPE_PCIE,
.nlanes = 3,
@@ -1986,10 +2359,98 @@ static const struct qmp_phy_cfg sm8150_usb3phy_cfg = {
.is_dual_lane_phy = true,
};
-static void qcom_qmp_phy_configure(void __iomem *base,
- const unsigned int *regs,
- const struct qmp_phy_init_tbl tbl[],
- int num)
+static const struct qmp_phy_cfg sm8150_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8150_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8150_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8150_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3phy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_serdes_tbl),
+ .tx_tbl = sm8250_usb3_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_tx_tbl),
+ .rx_tbl = sm8250_usb3_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_rx_tbl),
+ .pcs_tbl = sm8250_usb3_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_pcs_tbl),
+ .clk_list = qmp_v4_sm8250_usbphy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_sm8250_usbphy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3phy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+
+ .has_phy_dp_com_ctrl = true,
+ .is_dual_lane_phy = true,
+};
+
+static const struct qmp_phy_cfg sm8250_usb3_uniphy_cfg = {
+ .type = PHY_TYPE_USB3,
+ .nlanes = 1,
+
+ .serdes_tbl = sm8150_usb3_uniphy_serdes_tbl,
+ .serdes_tbl_num = ARRAY_SIZE(sm8150_usb3_uniphy_serdes_tbl),
+ .tx_tbl = sm8250_usb3_uniphy_tx_tbl,
+ .tx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_tx_tbl),
+ .rx_tbl = sm8250_usb3_uniphy_rx_tbl,
+ .rx_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_rx_tbl),
+ .pcs_tbl = sm8250_usb3_uniphy_pcs_tbl,
+ .pcs_tbl_num = ARRAY_SIZE(sm8250_usb3_uniphy_pcs_tbl),
+ .clk_list = qmp_v4_phy_clk_l,
+ .num_clks = ARRAY_SIZE(qmp_v4_phy_clk_l),
+ .reset_list = msm8996_usb3phy_reset_l,
+ .num_resets = ARRAY_SIZE(msm8996_usb3phy_reset_l),
+ .vreg_list = qmp_phy_vreg_l,
+ .num_vregs = ARRAY_SIZE(qmp_phy_vreg_l),
+ .regs = qmp_v4_usb3_uniphy_regs_layout,
+
+ .start_ctrl = SERDES_START | PCS_START,
+ .pwrdn_ctrl = SW_PWRDN,
+
+ .has_pwrdn_delay = true,
+ .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
+ .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
+};
+
+static void qcom_qmp_phy_configure_lane(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num,
+ u8 lane_mask)
{
int i;
const struct qmp_phy_init_tbl *t = tbl;
@@ -1998,6 +2459,9 @@ static void qcom_qmp_phy_configure(void __iomem *base,
return;
for (i = 0; i < num; i++, t++) {
+ if (!(t->lane_mask & lane_mask))
+ continue;
+
if (t->in_layout)
writel(t->val, base + regs[t->offset]);
else
@@ -2005,6 +2469,14 @@ static void qcom_qmp_phy_configure(void __iomem *base,
}
}
+static void qcom_qmp_phy_configure(void __iomem *base,
+ const unsigned int *regs,
+ const struct qmp_phy_init_tbl tbl[],
+ int num)
+{
+ qcom_qmp_phy_configure_lane(base, regs, tbl, num, 0xff);
+}
+
static int qcom_qmp_phy_com_init(struct qmp_phy *qphy)
{
struct qcom_qmp *qmp = qphy->qmp;
@@ -2219,16 +2691,18 @@ static int qcom_qmp_phy_enable(struct phy *phy)
}
/* Tx, Rx, and PCS configurations */
- qcom_qmp_phy_configure(tx, cfg->regs, cfg->tx_tbl, cfg->tx_tbl_num);
+ qcom_qmp_phy_configure_lane(tx, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 1);
/* Configuration for other LANE for USB-DP combo PHY */
if (cfg->is_dual_lane_phy)
- qcom_qmp_phy_configure(qphy->tx2, cfg->regs,
- cfg->tx_tbl, cfg->tx_tbl_num);
+ qcom_qmp_phy_configure_lane(qphy->tx2, cfg->regs,
+ cfg->tx_tbl, cfg->tx_tbl_num, 2);
- qcom_qmp_phy_configure(rx, cfg->regs, cfg->rx_tbl, cfg->rx_tbl_num);
+ qcom_qmp_phy_configure_lane(rx, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 1);
if (cfg->is_dual_lane_phy)
- qcom_qmp_phy_configure(qphy->rx2, cfg->regs,
- cfg->rx_tbl, cfg->rx_tbl_num);
+ qcom_qmp_phy_configure_lane(qphy->rx2, cfg->regs,
+ cfg->rx_tbl, cfg->rx_tbl_num, 2);
qcom_qmp_phy_configure(pcs, cfg->regs, cfg->pcs_tbl, cfg->pcs_tbl_num);
ret = reset_control_deassert(qmp->ufs_reset);
@@ -2699,6 +3173,9 @@ int qcom_qmp_phy_create(struct device *dev, struct device_node *np, int id)
static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
{
+ .compatible = "qcom,ipq8074-qmp-usb3-phy",
+ .data = &ipq8074_usb3phy_cfg,
+ }, {
.compatible = "qcom,msm8996-qmp-pcie-phy",
.data = &msm8996_pciephy_cfg,
}, {
@@ -2746,6 +3223,15 @@ static const struct of_device_id qcom_qmp_phy_of_match_table[] = {
}, {
.compatible = "qcom,sm8150-qmp-usb3-phy",
.data = &sm8150_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8150-qmp-usb3-uni-phy",
+ .data = &sm8150_usb3_uniphy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-phy",
+ .data = &sm8250_usb3phy_cfg,
+ }, {
+ .compatible = "qcom,sm8250-qmp-usb3-uni-phy",
+ .data = &sm8250_usb3_uniphy_cfg,
},
{ },
};
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.h b/drivers/phy/qualcomm/phy-qcom-qmp.h
index 6d017a0c0c8d..4277f592684b 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.h
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.h
@@ -363,7 +363,10 @@
/* Only for QMP V4 PHY - TX registers */
#define QSERDES_V4_TX_RES_CODE_LANE_TX 0x34
#define QSERDES_V4_TX_RES_CODE_LANE_RX 0x38
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_TX 0x3c
+#define QSERDES_V4_TX_RES_CODE_LANE_OFFSET_RX 0x40
#define QSERDES_V4_TX_LANE_MODE_1 0x84
+#define QSERDES_V4_TX_LANE_MODE_2 0x88
#define QSERDES_V4_TX_RCV_DETECT_LVL_2 0x9c
#define QSERDES_V4_TX_PWM_GEAR_1_DIVIDER_BAND0_1 0xd8
#define QSERDES_V4_TX_PWM_GEAR_2_DIVIDER_BAND0_1 0xdC
@@ -709,6 +712,10 @@
#define QPHY_V4_PCS_USB3_SIGDET_STARTUP_TIMER_VAL 0x354
#define QPHY_V4_PCS_USB3_TEST_CONTROL 0x358
+/* Only for QMP V4 PHY - UNI has 0x300 offset for PCS_USB3 regs */
+#define QPHY_V4_PCS_USB3_UNI_LFPS_DET_HIGH_COUNT_VAL 0x618
+#define QPHY_V4_PCS_USB3_UNI_RXEQTRAINING_DFE_TIME_S2 0x638
+
/* Only for QMP V4 PHY - PCS_MISC registers */
#define QPHY_V4_PCS_MISC_TYPEC_CTRL 0x00
#define QPHY_V4_PCS_MISC_TYPEC_PWRDN_CTRL 0x04
diff --git a/drivers/phy/qualcomm/phy-qcom-qusb2.c b/drivers/phy/qualcomm/phy-qcom-qusb2.c
index 393011a05b48..557547dabfd5 100644
--- a/drivers/phy/qualcomm/phy-qcom-qusb2.c
+++ b/drivers/phy/qualcomm/phy-qcom-qusb2.c
@@ -810,6 +810,9 @@ static const struct phy_ops qusb2_phy_gen_ops = {
static const struct of_device_id qusb2_phy_of_match_table[] = {
{
+ .compatible = "qcom,ipq8074-qusb2-phy",
+ .data = &msm8996_phy_cfg,
+ }, {
.compatible = "qcom,msm8996-qusb2-phy",
.data = &msm8996_phy_cfg,
}, {
diff --git a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
index 4d74045271eb..ae4bac024c7b 100644
--- a/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
+++ b/drivers/phy/qualcomm/phy-qcom-snps-femto-v2.c
@@ -77,6 +77,7 @@ static const char * const qcom_snps_hsphy_vreg_names[] = {
* @phy_reset: phy reset control
* @vregs: regulator supplies bulk data
* @phy_initialized: if PHY has been initialized correctly
+ * @mode: contains the current mode the PHY is in
*/
struct qcom_snps_hsphy {
struct phy *phy;
@@ -88,6 +89,7 @@ struct qcom_snps_hsphy {
struct regulator_bulk_data vregs[SNPS_HS_NUM_VREGS];
bool phy_initialized;
+ enum phy_mode mode;
};
static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
@@ -104,6 +106,72 @@ static inline void qcom_snps_hsphy_write_mask(void __iomem *base, u32 offset,
readl_relaxed(base + offset);
}
+static int qcom_snps_hsphy_suspend(struct qcom_snps_hsphy *hsphy)
+{
+ dev_dbg(&hsphy->phy->dev, "Suspend QCOM SNPS PHY\n");
+
+ if (hsphy->mode == PHY_MODE_USB_HOST) {
+ /* Enable auto-resume to meet remote wakeup timing */
+ qcom_snps_hsphy_write_mask(hsphy->base,
+ USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ USB2_AUTO_RESUME,
+ USB2_AUTO_RESUME);
+ usleep_range(500, 1000);
+ qcom_snps_hsphy_write_mask(hsphy->base,
+ USB2_PHY_USB_PHY_HS_PHY_CTRL2,
+ 0, USB2_AUTO_RESUME);
+ }
+
+ clk_disable_unprepare(hsphy->cfg_ahb_clk);
+ return 0;
+}
+
+static int qcom_snps_hsphy_resume(struct qcom_snps_hsphy *hsphy)
+{
+ int ret;
+
+ dev_dbg(&hsphy->phy->dev, "Resume QCOM SNPS PHY, mode\n");
+
+ ret = clk_prepare_enable(hsphy->cfg_ahb_clk);
+ if (ret) {
+ dev_err(&hsphy->phy->dev, "failed to enable cfg ahb clock\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_suspend(struct device *dev)
+{
+ struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+ if (!hsphy->phy_initialized)
+ return 0;
+
+ qcom_snps_hsphy_suspend(hsphy);
+ return 0;
+}
+
+static int __maybe_unused qcom_snps_hsphy_runtime_resume(struct device *dev)
+{
+ struct qcom_snps_hsphy *hsphy = dev_get_drvdata(dev);
+
+ if (!hsphy->phy_initialized)
+ return 0;
+
+ qcom_snps_hsphy_resume(hsphy);
+ return 0;
+}
+
+static int qcom_snps_hsphy_set_mode(struct phy *phy, enum phy_mode mode,
+ int submode)
+{
+ struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
+
+ hsphy->mode = mode;
+ return 0;
+}
+
static int qcom_snps_hsphy_init(struct phy *phy)
{
struct qcom_snps_hsphy *hsphy = phy_get_drvdata(phy);
@@ -201,6 +269,7 @@ static int qcom_snps_hsphy_exit(struct phy *phy)
static const struct phy_ops qcom_snps_hsphy_gen_ops = {
.init = qcom_snps_hsphy_init,
.exit = qcom_snps_hsphy_exit,
+ .set_mode = qcom_snps_hsphy_set_mode,
.owner = THIS_MODULE,
};
@@ -212,6 +281,11 @@ static const struct of_device_id qcom_snps_hsphy_of_match_table[] = {
};
MODULE_DEVICE_TABLE(of, qcom_snps_hsphy_of_match_table);
+static const struct dev_pm_ops qcom_snps_hsphy_pm_ops = {
+ SET_RUNTIME_PM_OPS(qcom_snps_hsphy_runtime_suspend,
+ qcom_snps_hsphy_runtime_resume, NULL)
+};
+
static int qcom_snps_hsphy_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -255,6 +329,14 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
return ret;
}
+ pm_runtime_set_active(dev);
+ pm_runtime_enable(dev);
+ /*
+ * Prevent runtime pm from being ON by default. Users can enable
+ * it using power/control in sysfs.
+ */
+ pm_runtime_forbid(dev);
+
generic_phy = devm_phy_create(dev, NULL, &qcom_snps_hsphy_gen_ops);
if (IS_ERR(generic_phy)) {
ret = PTR_ERR(generic_phy);
@@ -269,6 +351,8 @@ static int qcom_snps_hsphy_probe(struct platform_device *pdev)
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
if (!IS_ERR(phy_provider))
dev_dbg(dev, "Registered Qcom-SNPS HS phy\n");
+ else
+ pm_runtime_disable(dev);
return PTR_ERR_OR_ZERO(phy_provider);
}
@@ -277,6 +361,7 @@ static struct platform_driver qcom_snps_hsphy_driver = {
.probe = qcom_snps_hsphy_probe,
.driver = {
.name = "qcom-snps-hs-femto-v2-phy",
+ .pm = &qcom_snps_hsphy_pm_ops,
.of_match_table = qcom_snps_hsphy_of_match_table,
},
};
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-i.h b/drivers/phy/qualcomm/phy-qcom-ufs-i.h
deleted file mode 100644
index 9bf973a0d8c3..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-i.h
+++ /dev/null
@@ -1,131 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_I_H_
-#define UFS_QCOM_PHY_I_H_
-
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/phy/phy.h>
-#include <linux/regulator/consumer.h>
-#include <linux/reset.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-#include <linux/iopoll.h>
-
-#define UFS_QCOM_PHY_CAL_ENTRY(reg, val) \
- { \
- .reg_offset = reg, \
- .cfg_value = val, \
- }
-
-#define UFS_QCOM_PHY_NAME_LEN 30
-
-enum {
- MASK_SERDES_START = 0x1,
- MASK_PCS_READY = 0x1,
-};
-
-enum {
- OFFSET_SERDES_START = 0x0,
-};
-
-struct ufs_qcom_phy_stored_attributes {
- u32 att;
- u32 value;
-};
-
-
-struct ufs_qcom_phy_calibration {
- u32 reg_offset;
- u32 cfg_value;
-};
-
-struct ufs_qcom_phy_vreg {
- const char *name;
- struct regulator *reg;
- int max_uA;
- int min_uV;
- int max_uV;
- bool enabled;
-};
-
-struct ufs_qcom_phy {
- struct list_head list;
- struct device *dev;
- void __iomem *mmio;
- void __iomem *dev_ref_clk_ctrl_mmio;
- struct clk *tx_iface_clk;
- struct clk *rx_iface_clk;
- bool is_iface_clk_enabled;
- struct clk *ref_clk_src;
- struct clk *ref_clk_parent;
- struct clk *ref_clk;
- bool is_ref_clk_enabled;
- bool is_dev_ref_clk_enabled;
- struct ufs_qcom_phy_vreg vdda_pll;
- struct ufs_qcom_phy_vreg vdda_phy;
- struct ufs_qcom_phy_vreg vddp_ref_clk;
- unsigned int quirks;
-
- /*
- * If UFS link is put into Hibern8 and if UFS PHY analog hardware is
- * power collapsed (by clearing UFS_PHY_POWER_DOWN_CONTROL), Hibern8
- * exit might fail even after powering on UFS PHY analog hardware.
- * Enabling this quirk will help to solve above issue by doing
- * custom PHY settings just before PHY analog power collapse.
- */
- #define UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE BIT(0)
-
- u8 host_ctrl_rev_major;
- u16 host_ctrl_rev_minor;
- u16 host_ctrl_rev_step;
-
- char name[UFS_QCOM_PHY_NAME_LEN];
- struct ufs_qcom_phy_calibration *cached_regs;
- int cached_regs_table_size;
- struct ufs_qcom_phy_specific_ops *phy_spec_ops;
-
- enum phy_mode mode;
- struct reset_control *ufs_reset;
-};
-
-/**
- * struct ufs_qcom_phy_specific_ops - set of pointers to functions which have a
- * specific implementation per phy. Each UFS phy, should implement
- * those functions according to its spec and requirements
- * @start_serdes: pointer to a function that starts the serdes
- * @is_physical_coding_sublayer_ready: pointer to a function that
- * checks pcs readiness. returns 0 for success and non-zero for error.
- * @set_tx_lane_enable: pointer to a function that enable tx lanes
- * @power_control: pointer to a function that controls analog rail of phy
- * and writes to QSERDES_RX_SIGDET_CNTRL attribute
- */
-struct ufs_qcom_phy_specific_ops {
- int (*calibrate)(struct ufs_qcom_phy *ufs_qcom_phy, bool is_rate_B);
- void (*start_serdes)(struct ufs_qcom_phy *phy);
- int (*is_physical_coding_sublayer_ready)(struct ufs_qcom_phy *phy);
- void (*set_tx_lane_enable)(struct ufs_qcom_phy *phy, u32 val);
- void (*power_control)(struct ufs_qcom_phy *phy, bool val);
-};
-
-struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy);
-int ufs_qcom_phy_power_on(struct phy *generic_phy);
-int ufs_qcom_phy_power_off(struct phy *generic_phy);
-int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common);
-int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common);
-int ufs_qcom_phy_remove(struct phy *generic_phy,
- struct ufs_qcom_phy *ufs_qcom_phy);
-struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
- struct ufs_qcom_phy *common_cfg,
- const struct phy_ops *ufs_qcom_phy_gen_ops,
- struct ufs_qcom_phy_specific_ops *phy_spec_ops);
-int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- struct ufs_qcom_phy_calibration *tbl_A, int tbl_size_A,
- struct ufs_qcom_phy_calibration *tbl_B, int tbl_size_B,
- bool is_rate_B);
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
deleted file mode 100644
index 54b355bfc24c..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.c
+++ /dev/null
@@ -1,172 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-qmp-14nm.h"
-
-#define UFS_PHY_NAME "ufs_phy_qmp_14nm"
-#define UFS_PHY_VDDA_PHY_UV (925000)
-
-static
-int ufs_qcom_phy_qmp_14nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- bool is_rate_B)
-{
- int tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A);
- int tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
- int err;
-
- err = ufs_qcom_phy_calibrate(ufs_qcom_phy, phy_cal_table_rate_A,
- tbl_size_A, phy_cal_table_rate_B, tbl_size_B, is_rate_B);
-
- if (err)
- dev_err(ufs_qcom_phy->dev,
- "%s: ufs_qcom_phy_calibrate() failed %d\n",
- __func__, err);
- return err;
-}
-
-static
-void ufs_qcom_phy_qmp_14nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
-{
- phy_common->quirks =
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-}
-
-static
-int ufs_qcom_phy_qmp_14nm_set_mode(struct phy *generic_phy,
- enum phy_mode mode, int submode)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->mode = PHY_MODE_INVALID;
-
- if (mode > 0)
- phy_common->mode = mode;
-
- return 0;
-}
-
-static
-void ufs_qcom_phy_qmp_14nm_power_control(struct ufs_qcom_phy *phy, bool val)
-{
- writel_relaxed(val ? 0x1 : 0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * Before any transactions involving PHY, ensure PHY knows
- * that it's analog rail is powered ON (or OFF).
- */
- mb();
-}
-
-static inline
-void ufs_qcom_phy_qmp_14nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
-{
- /*
- * 14nm PHY does not have TX_LANE_ENABLE register.
- * Implement this function so as not to propagate error to caller.
- */
-}
-
-static inline void ufs_qcom_phy_qmp_14nm_start_serdes(struct ufs_qcom_phy *phy)
-{
- u32 tmp;
-
- tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
- tmp &= ~MASK_SERDES_START;
- tmp |= (1 << OFFSET_SERDES_START);
- writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
- /* Ensure register value is committed */
- mb();
-}
-
-static int ufs_qcom_phy_qmp_14nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
-{
- int err = 0;
- u32 val;
-
- err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
- val, (val & MASK_PCS_READY), 10, 1000000);
- if (err)
- dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
- __func__, err);
- return err;
-}
-
-static const struct phy_ops ufs_qcom_phy_qmp_14nm_phy_ops = {
- .power_on = ufs_qcom_phy_power_on,
- .power_off = ufs_qcom_phy_power_off,
- .set_mode = ufs_qcom_phy_qmp_14nm_set_mode,
- .owner = THIS_MODULE,
-};
-
-static struct ufs_qcom_phy_specific_ops phy_14nm_ops = {
- .calibrate = ufs_qcom_phy_qmp_14nm_phy_calibrate,
- .start_serdes = ufs_qcom_phy_qmp_14nm_start_serdes,
- .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_14nm_is_pcs_ready,
- .set_tx_lane_enable = ufs_qcom_phy_qmp_14nm_set_tx_lane_enable,
- .power_control = ufs_qcom_phy_qmp_14nm_power_control,
-};
-
-static int ufs_qcom_phy_qmp_14nm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct phy *generic_phy;
- struct ufs_qcom_phy_qmp_14nm *phy;
- struct ufs_qcom_phy *phy_common;
- int err = 0;
-
- phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
- if (!phy) {
- err = -ENOMEM;
- goto out;
- }
- phy_common = &phy->common_cfg;
-
- generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common,
- &ufs_qcom_phy_qmp_14nm_phy_ops, &phy_14nm_ops);
-
- if (!generic_phy) {
- err = -EIO;
- goto out;
- }
-
- err = ufs_qcom_phy_init_clks(phy_common);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vregulators(phy_common);
- if (err)
- goto out;
-
- phy_common->vdda_phy.max_uV = UFS_PHY_VDDA_PHY_UV;
- phy_common->vdda_phy.min_uV = UFS_PHY_VDDA_PHY_UV;
-
- ufs_qcom_phy_qmp_14nm_advertise_quirks(phy_common);
-
- phy_set_drvdata(generic_phy, phy);
-
- strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name));
-
-out:
- return err;
-}
-
-static const struct of_device_id ufs_qcom_phy_qmp_14nm_of_match[] = {
- {.compatible = "qcom,ufs-phy-qmp-14nm"},
- {.compatible = "qcom,msm8996-ufs-phy-qmp-14nm"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_14nm_of_match);
-
-static struct platform_driver ufs_qcom_phy_qmp_14nm_driver = {
- .probe = ufs_qcom_phy_qmp_14nm_probe,
- .driver = {
- .of_match_table = ufs_qcom_phy_qmp_14nm_of_match,
- .name = "ufs_qcom_phy_qmp_14nm",
- },
-};
-
-module_platform_driver(ufs_qcom_phy_qmp_14nm_driver);
-
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 14nm");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
deleted file mode 100644
index ceca654b9338..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-14nm.h
+++ /dev/null
@@ -1,168 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_QMP_14NM_H_
-#define UFS_QCOM_PHY_QMP_14NM_H_
-
-#include "phy-qcom-ufs-i.h"
-
-/* QCOM UFS PHY control registers */
-#define COM_OFF(x) (0x000 + x)
-#define PHY_OFF(x) (0xC00 + x)
-#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
-#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
-
-/* UFS PHY QSERDES COM registers */
-#define QSERDES_COM_BG_TIMER COM_OFF(0x0C)
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x34)
-#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x3C)
-#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0x4C)
-#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0x50)
-#define QSERDES_COM_LOCK_CMP3_MODE0 COM_OFF(0x54)
-#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0x58)
-#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0x5C)
-#define QSERDES_COM_LOCK_CMP3_MODE1 COM_OFF(0x60)
-#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x78)
-#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x7C)
-#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x84)
-#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x88)
-#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x90)
-#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x94)
-#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0xAC)
-#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0xB4)
-#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xC8)
-#define QSERDES_COM_LOCK_CMP_CFG COM_OFF(0xCC)
-#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xD0)
-#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xD4)
-#define QSERDES_COM_DIV_FRAC_START1_MODE0 COM_OFF(0xDC)
-#define QSERDES_COM_DIV_FRAC_START2_MODE0 COM_OFF(0xE0)
-#define QSERDES_COM_DIV_FRAC_START3_MODE0 COM_OFF(0xE4)
-#define QSERDES_COM_DIV_FRAC_START1_MODE1 COM_OFF(0xE8)
-#define QSERDES_COM_DIV_FRAC_START2_MODE1 COM_OFF(0xEC)
-#define QSERDES_COM_DIV_FRAC_START3_MODE1 COM_OFF(0xF0)
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE0 COM_OFF(0x108)
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE0 COM_OFF(0x10C)
-#define QSERDES_COM_INTEGLOOP_GAIN0_MODE1 COM_OFF(0x110)
-#define QSERDES_COM_INTEGLOOP_GAIN1_MODE1 COM_OFF(0x114)
-#define QSERDES_COM_VCO_TUNE_CTRL COM_OFF(0x124)
-#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x128)
-#define QSERDES_COM_VCO_TUNE1_MODE0 COM_OFF(0x12C)
-#define QSERDES_COM_VCO_TUNE2_MODE0 COM_OFF(0x130)
-#define QSERDES_COM_VCO_TUNE1_MODE1 COM_OFF(0x134)
-#define QSERDES_COM_VCO_TUNE2_MODE1 COM_OFF(0x138)
-#define QSERDES_COM_VCO_TUNE_TIMER1 COM_OFF(0x144)
-#define QSERDES_COM_VCO_TUNE_TIMER2 COM_OFF(0x148)
-#define QSERDES_COM_CLK_SELECT COM_OFF(0x174)
-#define QSERDES_COM_HSCLK_SEL COM_OFF(0x178)
-#define QSERDES_COM_CORECLK_DIV COM_OFF(0x184)
-#define QSERDES_COM_CORE_CLK_EN COM_OFF(0x18C)
-#define QSERDES_COM_CMN_CONFIG COM_OFF(0x194)
-#define QSERDES_COM_SVS_MODE_CLK_SEL COM_OFF(0x19C)
-#define QSERDES_COM_CORECLK_DIV_MODE1 COM_OFF(0x1BC)
-
-/* UFS PHY registers */
-#define UFS_PHY_PHY_START PHY_OFF(0x00)
-#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
-#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x168)
-
-/* UFS PHY TX registers */
-#define QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN TX_OFF(0, 0x68)
-#define QSERDES_TX_LANE_MODE TX_OFF(0, 0x94)
-
-/* UFS PHY RX registers */
-#define QSERDES_RX_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x40)
-#define QSERDES_RX_RX_TERM_BW RX_OFF(0, 0x90)
-#define QSERDES_RX_RX_EQ_GAIN1_LSB RX_OFF(0, 0xC4)
-#define QSERDES_RX_RX_EQ_GAIN1_MSB RX_OFF(0, 0xC8)
-#define QSERDES_RX_RX_EQ_GAIN2_LSB RX_OFF(0, 0xCC)
-#define QSERDES_RX_RX_EQ_GAIN2_MSB RX_OFF(0, 0xD0)
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xD8)
-#define QSERDES_RX_SIGDET_CNTRL RX_OFF(0, 0x114)
-#define QSERDES_RX_SIGDET_LVL RX_OFF(0, 0x118)
-#define QSERDES_RX_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x11C)
-#define QSERDES_RX_RX_INTERFACE_MODE RX_OFF(0, 0x12C)
-
-/*
- * This structure represents the 14nm specific phy.
- * common_cfg MUST remain the first field in this structure
- * in case extra fields are added. This way, when calling
- * get_ufs_qcom_phy() of generic phy, we can extract the
- * common phy structure (struct ufs_qcom_phy) out of it
- * regardless of the relevant specific phy.
- */
-struct ufs_qcom_phy_qmp_14nm {
- struct ufs_qcom_phy common_cfg;
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CMN_CONFIG, 0x0e),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xd7),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CLK_SELECT, 0x30),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYS_CLK_CTRL, 0x06),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BG_TIMER, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x05),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORECLK_DIV_MODE1, 0x0a),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_CTRL, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CORE_CLK_EN, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_CFG, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_TIMER2, 0x3f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x14),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SVS_MODE_CLK_SEL, 0x05),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x0b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x16),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE0, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE0, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE0, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE0, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x0b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x16),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x28),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN0_MODE1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE1_MODE1, 0xd6),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE2_MODE1, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x32),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x0f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP3_MODE1, 0x00),
-
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_HIGHZ_TRANSCEIVER_BIAS_DRVR_EN, 0x45),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE, 0x02),
-
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_LVL, 0x24),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_CNTRL, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_INTERFACE_MODE, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_SIGDET_DEGLITCH_CNTRL, 0x18),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_UCDR_FASTLOCK_FO_GAIN, 0x0B),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_TERM_BW, 0x5B),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB, 0xFF),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB, 0x3F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB, 0xFF),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB, 0x0F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2, 0x0E),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x54),
-};
-
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
deleted file mode 100644
index 3e9d8b71e995..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.c
+++ /dev/null
@@ -1,226 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-qmp-20nm.h"
-
-#define UFS_PHY_NAME "ufs_phy_qmp_20nm"
-
-static
-int ufs_qcom_phy_qmp_20nm_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- bool is_rate_B)
-{
- struct ufs_qcom_phy_calibration *tbl_A, *tbl_B;
- int tbl_size_A, tbl_size_B;
- u8 major = ufs_qcom_phy->host_ctrl_rev_major;
- u16 minor = ufs_qcom_phy->host_ctrl_rev_minor;
- u16 step = ufs_qcom_phy->host_ctrl_rev_step;
- int err;
-
- if ((major == 0x1) && (minor == 0x002) && (step == 0x0000)) {
- tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_2_0);
- tbl_A = phy_cal_table_rate_A_1_2_0;
- } else if ((major == 0x1) && (minor == 0x003) && (step == 0x0000)) {
- tbl_size_A = ARRAY_SIZE(phy_cal_table_rate_A_1_3_0);
- tbl_A = phy_cal_table_rate_A_1_3_0;
- } else {
- dev_err(ufs_qcom_phy->dev, "%s: Unknown UFS-PHY version, no calibration values\n",
- __func__);
- err = -ENODEV;
- goto out;
- }
-
- tbl_size_B = ARRAY_SIZE(phy_cal_table_rate_B);
- tbl_B = phy_cal_table_rate_B;
-
- err = ufs_qcom_phy_calibrate(ufs_qcom_phy, tbl_A, tbl_size_A,
- tbl_B, tbl_size_B, is_rate_B);
-
- if (err)
- dev_err(ufs_qcom_phy->dev, "%s: ufs_qcom_phy_calibrate() failed %d\n",
- __func__, err);
-
-out:
- return err;
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_advertise_quirks(struct ufs_qcom_phy *phy_common)
-{
- phy_common->quirks =
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-}
-
-static
-int ufs_qcom_phy_qmp_20nm_set_mode(struct phy *generic_phy,
- enum phy_mode mode, int submode)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->mode = PHY_MODE_INVALID;
-
- if (mode > 0)
- phy_common->mode = mode;
-
- return 0;
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_power_control(struct ufs_qcom_phy *phy, bool val)
-{
- bool hibern8_exit_after_pwr_collapse = phy->quirks &
- UFS_QCOM_PHY_QUIRK_HIBERN8_EXIT_AFTER_PHY_PWR_COLLAPSE;
-
- if (val) {
- writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * Before any transactions involving PHY, ensure PHY knows
- * that it's analog rail is powered ON.
- */
- mb();
-
- if (hibern8_exit_after_pwr_collapse) {
- /*
- * Give atleast 1us delay after restoring PHY analog
- * power.
- */
- usleep_range(1, 2);
- writel_relaxed(0x0A, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- writel_relaxed(0x08, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- /*
- * Make sure workaround is deactivated before proceeding
- * with normal PHY operations.
- */
- mb();
- }
- } else {
- if (hibern8_exit_after_pwr_collapse) {
- writel_relaxed(0x0A, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- writel_relaxed(0x02, phy->mmio +
- QSERDES_COM_SYSCLK_EN_SEL_TXBAND);
- /*
- * Make sure that above workaround is activated before
- * PHY analog power collapse.
- */
- mb();
- }
-
- writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
- /*
- * ensure that PHY knows its PHY analog rail is going
- * to be powered down
- */
- mb();
- }
-}
-
-static
-void ufs_qcom_phy_qmp_20nm_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
-{
- writel_relaxed(val & UFS_PHY_TX_LANE_ENABLE_MASK,
- phy->mmio + UFS_PHY_TX_LANE_ENABLE);
- mb();
-}
-
-static inline void ufs_qcom_phy_qmp_20nm_start_serdes(struct ufs_qcom_phy *phy)
-{
- u32 tmp;
-
- tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
- tmp &= ~MASK_SERDES_START;
- tmp |= (1 << OFFSET_SERDES_START);
- writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
- mb();
-}
-
-static int ufs_qcom_phy_qmp_20nm_is_pcs_ready(struct ufs_qcom_phy *phy_common)
-{
- int err = 0;
- u32 val;
-
- err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
- val, (val & MASK_PCS_READY), 10, 1000000);
- if (err)
- dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
- __func__, err);
- return err;
-}
-
-static const struct phy_ops ufs_qcom_phy_qmp_20nm_phy_ops = {
- .power_on = ufs_qcom_phy_power_on,
- .power_off = ufs_qcom_phy_power_off,
- .set_mode = ufs_qcom_phy_qmp_20nm_set_mode,
- .owner = THIS_MODULE,
-};
-
-static struct ufs_qcom_phy_specific_ops phy_20nm_ops = {
- .calibrate = ufs_qcom_phy_qmp_20nm_phy_calibrate,
- .start_serdes = ufs_qcom_phy_qmp_20nm_start_serdes,
- .is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_20nm_is_pcs_ready,
- .set_tx_lane_enable = ufs_qcom_phy_qmp_20nm_set_tx_lane_enable,
- .power_control = ufs_qcom_phy_qmp_20nm_power_control,
-};
-
-static int ufs_qcom_phy_qmp_20nm_probe(struct platform_device *pdev)
-{
- struct device *dev = &pdev->dev;
- struct phy *generic_phy;
- struct ufs_qcom_phy_qmp_20nm *phy;
- struct ufs_qcom_phy *phy_common;
- int err = 0;
-
- phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
- if (!phy) {
- err = -ENOMEM;
- goto out;
- }
- phy_common = &phy->common_cfg;
-
- generic_phy = ufs_qcom_phy_generic_probe(pdev, phy_common,
- &ufs_qcom_phy_qmp_20nm_phy_ops, &phy_20nm_ops);
-
- if (!generic_phy) {
- err = -EIO;
- goto out;
- }
-
- err = ufs_qcom_phy_init_clks(phy_common);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vregulators(phy_common);
- if (err)
- goto out;
-
- ufs_qcom_phy_qmp_20nm_advertise_quirks(phy_common);
-
- phy_set_drvdata(generic_phy, phy);
-
- strlcpy(phy_common->name, UFS_PHY_NAME, sizeof(phy_common->name));
-
-out:
- return err;
-}
-
-static const struct of_device_id ufs_qcom_phy_qmp_20nm_of_match[] = {
- {.compatible = "qcom,ufs-phy-qmp-20nm"},
- {},
-};
-MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_20nm_of_match);
-
-static struct platform_driver ufs_qcom_phy_qmp_20nm_driver = {
- .probe = ufs_qcom_phy_qmp_20nm_probe,
- .driver = {
- .of_match_table = ufs_qcom_phy_qmp_20nm_of_match,
- .name = "ufs_qcom_phy_qmp_20nm",
- },
-};
-
-module_platform_driver(ufs_qcom_phy_qmp_20nm_driver);
-
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP 20nm");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h b/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
deleted file mode 100644
index 8ce79f524eed..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs-qmp-20nm.h
+++ /dev/null
@@ -1,226 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#ifndef UFS_QCOM_PHY_QMP_20NM_H_
-#define UFS_QCOM_PHY_QMP_20NM_H_
-
-#include "phy-qcom-ufs-i.h"
-
-/* QCOM UFS PHY control registers */
-
-#define COM_OFF(x) (0x000 + x)
-#define PHY_OFF(x) (0xC00 + x)
-#define TX_OFF(n, x) (0x400 + (0x400 * n) + x)
-#define RX_OFF(n, x) (0x600 + (0x400 * n) + x)
-
-/* UFS PHY PLL block registers */
-#define QSERDES_COM_SYS_CLK_CTRL COM_OFF(0x0)
-#define QSERDES_COM_PLL_VCOTAIL_EN COM_OFF(0x04)
-#define QSERDES_COM_PLL_CNTRL COM_OFF(0x14)
-#define QSERDES_COM_PLL_IP_SETI COM_OFF(0x24)
-#define QSERDES_COM_CORE_CLK_IN_SYNC_SEL COM_OFF(0x28)
-#define QSERDES_COM_BIAS_EN_CLKBUFLR_EN COM_OFF(0x30)
-#define QSERDES_COM_PLL_CP_SETI COM_OFF(0x34)
-#define QSERDES_COM_PLL_IP_SETP COM_OFF(0x38)
-#define QSERDES_COM_PLL_CP_SETP COM_OFF(0x3C)
-#define QSERDES_COM_SYSCLK_EN_SEL_TXBAND COM_OFF(0x48)
-#define QSERDES_COM_RESETSM_CNTRL COM_OFF(0x4C)
-#define QSERDES_COM_RESETSM_CNTRL2 COM_OFF(0x50)
-#define QSERDES_COM_PLLLOCK_CMP1 COM_OFF(0x90)
-#define QSERDES_COM_PLLLOCK_CMP2 COM_OFF(0x94)
-#define QSERDES_COM_PLLLOCK_CMP3 COM_OFF(0x98)
-#define QSERDES_COM_PLLLOCK_CMP_EN COM_OFF(0x9C)
-#define QSERDES_COM_BGTC COM_OFF(0xA0)
-#define QSERDES_COM_DEC_START1 COM_OFF(0xAC)
-#define QSERDES_COM_PLL_AMP_OS COM_OFF(0xB0)
-#define QSERDES_COM_RES_CODE_UP_OFFSET COM_OFF(0xD8)
-#define QSERDES_COM_RES_CODE_DN_OFFSET COM_OFF(0xDC)
-#define QSERDES_COM_DIV_FRAC_START1 COM_OFF(0x100)
-#define QSERDES_COM_DIV_FRAC_START2 COM_OFF(0x104)
-#define QSERDES_COM_DIV_FRAC_START3 COM_OFF(0x108)
-#define QSERDES_COM_DEC_START2 COM_OFF(0x10C)
-#define QSERDES_COM_PLL_RXTXEPCLK_EN COM_OFF(0x110)
-#define QSERDES_COM_PLL_CRCTRL COM_OFF(0x114)
-#define QSERDES_COM_PLL_CLKEPDIV COM_OFF(0x118)
-
-/* TX LANE n (0, 1) registers */
-#define QSERDES_TX_EMP_POST1_LVL(n) TX_OFF(n, 0x08)
-#define QSERDES_TX_DRV_LVL(n) TX_OFF(n, 0x0C)
-#define QSERDES_TX_LANE_MODE(n) TX_OFF(n, 0x54)
-
-/* RX LANE n (0, 1) registers */
-#define QSERDES_RX_CDR_CONTROL1(n) RX_OFF(n, 0x0)
-#define QSERDES_RX_CDR_CONTROL_HALF(n) RX_OFF(n, 0x8)
-#define QSERDES_RX_RX_EQ_GAIN1_LSB(n) RX_OFF(n, 0xA8)
-#define QSERDES_RX_RX_EQ_GAIN1_MSB(n) RX_OFF(n, 0xAC)
-#define QSERDES_RX_RX_EQ_GAIN2_LSB(n) RX_OFF(n, 0xB0)
-#define QSERDES_RX_RX_EQ_GAIN2_MSB(n) RX_OFF(n, 0xB4)
-#define QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(n) RX_OFF(n, 0xBC)
-#define QSERDES_RX_CDR_CONTROL_QUARTER(n) RX_OFF(n, 0xC)
-#define QSERDES_RX_SIGDET_CNTRL(n) RX_OFF(n, 0x100)
-
-/* UFS PHY registers */
-#define UFS_PHY_PHY_START PHY_OFF(0x00)
-#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x4)
-#define UFS_PHY_TX_LANE_ENABLE PHY_OFF(0x44)
-#define UFS_PHY_PWM_G1_CLK_DIVIDER PHY_OFF(0x08)
-#define UFS_PHY_PWM_G2_CLK_DIVIDER PHY_OFF(0x0C)
-#define UFS_PHY_PWM_G3_CLK_DIVIDER PHY_OFF(0x10)
-#define UFS_PHY_PWM_G4_CLK_DIVIDER PHY_OFF(0x14)
-#define UFS_PHY_CORECLK_PWM_G1_CLK_DIVIDER PHY_OFF(0x34)
-#define UFS_PHY_CORECLK_PWM_G2_CLK_DIVIDER PHY_OFF(0x38)
-#define UFS_PHY_CORECLK_PWM_G3_CLK_DIVIDER PHY_OFF(0x3C)
-#define UFS_PHY_CORECLK_PWM_G4_CLK_DIVIDER PHY_OFF(0x40)
-#define UFS_PHY_OMC_STATUS_RDVAL PHY_OFF(0x68)
-#define UFS_PHY_LINE_RESET_TIME PHY_OFF(0x28)
-#define UFS_PHY_LINE_RESET_GRANULARITY PHY_OFF(0x2C)
-#define UFS_PHY_TSYNC_RSYNC_CNTL PHY_OFF(0x48)
-#define UFS_PHY_PLL_CNTL PHY_OFF(0x50)
-#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x54)
-#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x5C)
-#define UFS_PHY_TX_LARGE_AMP_POST_EMP_LVL PHY_OFF(0x58)
-#define UFS_PHY_TX_SMALL_AMP_POST_EMP_LVL PHY_OFF(0x60)
-#define UFS_PHY_CFG_CHANGE_CNT_VAL PHY_OFF(0x64)
-#define UFS_PHY_RX_SYNC_WAIT_TIME PHY_OFF(0x6C)
-#define UFS_PHY_TX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB4)
-#define UFS_PHY_RX_MIN_SLEEP_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE0)
-#define UFS_PHY_TX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xB8)
-#define UFS_PHY_RX_MIN_STALL_NOCONFIG_TIME_CAPABILITY PHY_OFF(0xE4)
-#define UFS_PHY_TX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xBC)
-#define UFS_PHY_RX_MIN_SAVE_CONFIG_TIME_CAPABILITY PHY_OFF(0xE8)
-#define UFS_PHY_RX_PWM_BURST_CLOSURE_LENGTH_CAPABILITY PHY_OFF(0xFC)
-#define UFS_PHY_RX_MIN_ACTIVATETIME_CAPABILITY PHY_OFF(0x100)
-#define UFS_PHY_RX_SIGDET_CTRL3 PHY_OFF(0x14c)
-#define UFS_PHY_RMMI_ATTR_CTRL PHY_OFF(0x160)
-#define UFS_PHY_RMMI_RX_CFGUPDT_L1 (1 << 7)
-#define UFS_PHY_RMMI_TX_CFGUPDT_L1 (1 << 6)
-#define UFS_PHY_RMMI_CFGWR_L1 (1 << 5)
-#define UFS_PHY_RMMI_CFGRD_L1 (1 << 4)
-#define UFS_PHY_RMMI_RX_CFGUPDT_L0 (1 << 3)
-#define UFS_PHY_RMMI_TX_CFGUPDT_L0 (1 << 2)
-#define UFS_PHY_RMMI_CFGWR_L0 (1 << 1)
-#define UFS_PHY_RMMI_CFGRD_L0 (1 << 0)
-#define UFS_PHY_RMMI_ATTRID PHY_OFF(0x164)
-#define UFS_PHY_RMMI_ATTRWRVAL PHY_OFF(0x168)
-#define UFS_PHY_RMMI_ATTRRDVAL_L0_STATUS PHY_OFF(0x16C)
-#define UFS_PHY_RMMI_ATTRRDVAL_L1_STATUS PHY_OFF(0x170)
-#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x174)
-
-#define UFS_PHY_TX_LANE_ENABLE_MASK 0x3
-
-/*
- * This structure represents the 20nm specific phy.
- * common_cfg MUST remain the first field in this structure
- * in case extra fields are added. This way, when calling
- * get_ufs_qcom_phy() of generic phy, we can extract the
- * common phy structure (struct ufs_qcom_phy) out of it
- * regardless of the relevant specific phy.
- */
-struct ufs_qcom_phy_qmp_20nm {
- struct ufs_qcom_phy common_cfg;
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_2_0[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x3f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x1b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x0f),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(0), 0x2F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(0), 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_EMP_POST1_LVL(1), 0x2F),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_DRV_LVL(1), 0x20),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_1_3_0[] = {
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL3, 0x0D),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_VCOTAIL_EN, 0xe1),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CRCTRL, 0xcc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL_TXBAND, 0x08),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CLKEPDIV, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RXTXEPCLK_EN, 0x10),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x82),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START1, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START2, 0x80),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DIV_FRAC_START3, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x19),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP3, 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP_EN, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL, 0x90),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RESETSM_CNTRL2, 0x03),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(0), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(0), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(0), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL1(1), 0xf2),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_HALF(1), 0x0c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_CDR_CONTROL_QUARTER(1), 0x12),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(0), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(0), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN1_MSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_LSB(1), 0xff),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQ_GAIN2_MSB(1), 0x00),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETI, 0x2b),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETP, 0x38),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CP_SETP, 0x3c),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_UP_OFFSET, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_RES_CODE_DN_OFFSET, 0x02),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IP_SETI, 0x01),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CNTRL, 0x40),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(0), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX_LANE_MODE(1), 0x68),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(1), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX_RX_EQU_ADAPTOR_CNTRL2(0), 0xdc),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x3),
-};
-
-static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START1, 0x98),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP1, 0x65),
- UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLLLOCK_CMP2, 0x1e),
-};
-
-#endif
diff --git a/drivers/phy/qualcomm/phy-qcom-ufs.c b/drivers/phy/qualcomm/phy-qcom-ufs.c
deleted file mode 100644
index 763c8d396af1..000000000000
--- a/drivers/phy/qualcomm/phy-qcom-ufs.c
+++ /dev/null
@@ -1,648 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (c) 2013-2015, Linux Foundation. All rights reserved.
- */
-
-#include "phy-qcom-ufs-i.h"
-
-#define MAX_PROP_NAME 32
-#define VDDA_PHY_MIN_UV 1000000
-#define VDDA_PHY_MAX_UV 1000000
-#define VDDA_PLL_MIN_UV 1800000
-#define VDDA_PLL_MAX_UV 1800000
-#define VDDP_REF_CLK_MIN_UV 1200000
-#define VDDP_REF_CLK_MAX_UV 1200000
-
-int ufs_qcom_phy_calibrate(struct ufs_qcom_phy *ufs_qcom_phy,
- struct ufs_qcom_phy_calibration *tbl_A,
- int tbl_size_A,
- struct ufs_qcom_phy_calibration *tbl_B,
- int tbl_size_B, bool is_rate_B)
-{
- int i;
- int ret = 0;
-
- if (!tbl_A) {
- dev_err(ufs_qcom_phy->dev, "%s: tbl_A is NULL", __func__);
- ret = EINVAL;
- goto out;
- }
-
- for (i = 0; i < tbl_size_A; i++)
- writel_relaxed(tbl_A[i].cfg_value,
- ufs_qcom_phy->mmio + tbl_A[i].reg_offset);
-
- /*
- * In case we would like to work in rate B, we need
- * to override a registers that were configured in rate A table
- * with registers of rate B table.
- * table.
- */
- if (is_rate_B) {
- if (!tbl_B) {
- dev_err(ufs_qcom_phy->dev, "%s: tbl_B is NULL",
- __func__);
- ret = EINVAL;
- goto out;
- }
-
- for (i = 0; i < tbl_size_B; i++)
- writel_relaxed(tbl_B[i].cfg_value,
- ufs_qcom_phy->mmio + tbl_B[i].reg_offset);
- }
-
- /* flush buffered writes */
- mb();
-
-out:
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_calibrate);
-
-/*
- * This assumes the embedded phy structure inside generic_phy is of type
- * struct ufs_qcom_phy. In order to function properly it's crucial
- * to keep the embedded struct "struct ufs_qcom_phy common_cfg"
- * as the first inside generic_phy.
- */
-struct ufs_qcom_phy *get_ufs_qcom_phy(struct phy *generic_phy)
-{
- return (struct ufs_qcom_phy *)phy_get_drvdata(generic_phy);
-}
-EXPORT_SYMBOL_GPL(get_ufs_qcom_phy);
-
-static
-int ufs_qcom_phy_base_init(struct platform_device *pdev,
- struct ufs_qcom_phy *phy_common)
-{
- struct device *dev = &pdev->dev;
- struct resource *res;
- int err = 0;
-
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_mem");
- phy_common->mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR((void const *)phy_common->mmio)) {
- err = PTR_ERR((void const *)phy_common->mmio);
- phy_common->mmio = NULL;
- dev_err(dev, "%s: ioremap for phy_mem resource failed %d\n",
- __func__, err);
- return err;
- }
-
- /* "dev_ref_clk_ctrl_mem" is optional resource */
- res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
- "dev_ref_clk_ctrl_mem");
- phy_common->dev_ref_clk_ctrl_mmio = devm_ioremap_resource(dev, res);
- if (IS_ERR((void const *)phy_common->dev_ref_clk_ctrl_mmio))
- phy_common->dev_ref_clk_ctrl_mmio = NULL;
-
- return 0;
-}
-
-struct phy *ufs_qcom_phy_generic_probe(struct platform_device *pdev,
- struct ufs_qcom_phy *common_cfg,
- const struct phy_ops *ufs_qcom_phy_gen_ops,
- struct ufs_qcom_phy_specific_ops *phy_spec_ops)
-{
- int err;
- struct device *dev = &pdev->dev;
- struct phy *generic_phy = NULL;
- struct phy_provider *phy_provider;
-
- err = ufs_qcom_phy_base_init(pdev, common_cfg);
- if (err) {
- dev_err(dev, "%s: phy base init failed %d\n", __func__, err);
- goto out;
- }
-
- phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
- if (IS_ERR(phy_provider)) {
- err = PTR_ERR(phy_provider);
- dev_err(dev, "%s: failed to register phy %d\n", __func__, err);
- goto out;
- }
-
- generic_phy = devm_phy_create(dev, NULL, ufs_qcom_phy_gen_ops);
- if (IS_ERR(generic_phy)) {
- err = PTR_ERR(generic_phy);
- dev_err(dev, "%s: failed to create phy %d\n", __func__, err);
- generic_phy = NULL;
- goto out;
- }
-
- common_cfg->phy_spec_ops = phy_spec_ops;
- common_cfg->dev = dev;
-
-out:
- return generic_phy;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_generic_probe);
-
-static int ufs_qcom_phy_get_reset(struct ufs_qcom_phy *phy_common)
-{
- struct reset_control *reset;
-
- if (phy_common->ufs_reset)
- return 0;
-
- reset = devm_reset_control_get_exclusive_by_index(phy_common->dev, 0);
- if (IS_ERR(reset))
- return PTR_ERR(reset);
-
- phy_common->ufs_reset = reset;
- return 0;
-}
-
-static int __ufs_qcom_phy_clk_get(struct device *dev,
- const char *name, struct clk **clk_out, bool err_print)
-{
- struct clk *clk;
- int err = 0;
-
- clk = devm_clk_get(dev, name);
- if (IS_ERR(clk)) {
- err = PTR_ERR(clk);
- if (err_print)
- dev_err(dev, "failed to get %s err %d", name, err);
- } else {
- *clk_out = clk;
- }
-
- return err;
-}
-
-static int ufs_qcom_phy_clk_get(struct device *dev,
- const char *name, struct clk **clk_out)
-{
- return __ufs_qcom_phy_clk_get(dev, name, clk_out, true);
-}
-
-int ufs_qcom_phy_init_clks(struct ufs_qcom_phy *phy_common)
-{
- int err;
-
- if (of_device_is_compatible(phy_common->dev->of_node,
- "qcom,msm8996-ufs-phy-qmp-14nm"))
- goto skip_txrx_clk;
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "tx_iface_clk",
- &phy_common->tx_iface_clk);
- if (err)
- goto out;
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "rx_iface_clk",
- &phy_common->rx_iface_clk);
- if (err)
- goto out;
-
-skip_txrx_clk:
- err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_src",
- &phy_common->ref_clk_src);
- if (err)
- goto out;
-
- /*
- * "ref_clk_parent" is optional hence don't abort init if it's not
- * found.
- */
- __ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk_parent",
- &phy_common->ref_clk_parent, false);
-
- err = ufs_qcom_phy_clk_get(phy_common->dev, "ref_clk",
- &phy_common->ref_clk);
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_clks);
-
-static int ufs_qcom_phy_init_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg,
- const char *name)
-{
- int err = 0;
-
- char prop_name[MAX_PROP_NAME];
-
- vreg->name = name;
- vreg->reg = devm_regulator_get(dev, name);
- if (IS_ERR(vreg->reg)) {
- err = PTR_ERR(vreg->reg);
- dev_err(dev, "failed to get %s, %d\n", name, err);
- goto out;
- }
-
- if (dev->of_node) {
- snprintf(prop_name, MAX_PROP_NAME, "%s-max-microamp", name);
- err = of_property_read_u32(dev->of_node,
- prop_name, &vreg->max_uA);
- if (err && err != -EINVAL) {
- dev_err(dev, "%s: failed to read %s\n",
- __func__, prop_name);
- goto out;
- } else if (err == -EINVAL || !vreg->max_uA) {
- if (regulator_count_voltages(vreg->reg) > 0) {
- dev_err(dev, "%s: %s is mandatory\n",
- __func__, prop_name);
- goto out;
- }
- err = 0;
- }
- }
-
- if (!strcmp(name, "vdda-pll")) {
- vreg->max_uV = VDDA_PLL_MAX_UV;
- vreg->min_uV = VDDA_PLL_MIN_UV;
- } else if (!strcmp(name, "vdda-phy")) {
- vreg->max_uV = VDDA_PHY_MAX_UV;
- vreg->min_uV = VDDA_PHY_MIN_UV;
- } else if (!strcmp(name, "vddp-ref-clk")) {
- vreg->max_uV = VDDP_REF_CLK_MAX_UV;
- vreg->min_uV = VDDP_REF_CLK_MIN_UV;
- }
-
-out:
- return err;
-}
-
-int ufs_qcom_phy_init_vregulators(struct ufs_qcom_phy *phy_common)
-{
- int err;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_pll,
- "vdda-pll");
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vdda_phy,
- "vdda-phy");
-
- if (err)
- goto out;
-
- err = ufs_qcom_phy_init_vreg(phy_common->dev, &phy_common->vddp_ref_clk,
- "vddp-ref-clk");
-
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_init_vregulators);
-
-static int ufs_qcom_phy_cfg_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg, bool on)
-{
- int ret = 0;
- struct regulator *reg = vreg->reg;
- const char *name = vreg->name;
- int min_uV;
- int uA_load;
-
- if (regulator_count_voltages(reg) > 0) {
- min_uV = on ? vreg->min_uV : 0;
- ret = regulator_set_voltage(reg, min_uV, vreg->max_uV);
- if (ret) {
- dev_err(dev, "%s: %s set voltage failed, err=%d\n",
- __func__, name, ret);
- goto out;
- }
- uA_load = on ? vreg->max_uA : 0;
- ret = regulator_set_load(reg, uA_load);
- if (ret >= 0) {
- /*
- * regulator_set_load() returns new regulator
- * mode upon success.
- */
- ret = 0;
- } else {
- dev_err(dev, "%s: %s set optimum mode(uA_load=%d) failed, err=%d\n",
- __func__, name, uA_load, ret);
- goto out;
- }
- }
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_enable_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg)
-{
- int ret = 0;
-
- if (!vreg || vreg->enabled)
- goto out;
-
- ret = ufs_qcom_phy_cfg_vreg(dev, vreg, true);
- if (ret) {
- dev_err(dev, "%s: ufs_qcom_phy_cfg_vreg() failed, err=%d\n",
- __func__, ret);
- goto out;
- }
-
- ret = regulator_enable(vreg->reg);
- if (ret) {
- dev_err(dev, "%s: enable failed, err=%d\n",
- __func__, ret);
- goto out;
- }
-
- vreg->enabled = true;
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_enable_ref_clk(struct ufs_qcom_phy *phy)
-{
- int ret = 0;
-
- if (phy->is_ref_clk_enabled)
- goto out;
-
- /*
- * reference clock is propagated in a daisy-chained manner from
- * source to phy, so ungate them at each stage.
- */
- ret = clk_prepare_enable(phy->ref_clk_src);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk_src enable failed %d\n",
- __func__, ret);
- goto out;
- }
-
- /*
- * "ref_clk_parent" is optional clock hence make sure that clk reference
- * is available before trying to enable the clock.
- */
- if (phy->ref_clk_parent) {
- ret = clk_prepare_enable(phy->ref_clk_parent);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk_parent enable failed %d\n",
- __func__, ret);
- goto out_disable_src;
- }
- }
-
- ret = clk_prepare_enable(phy->ref_clk);
- if (ret) {
- dev_err(phy->dev, "%s: ref_clk enable failed %d\n",
- __func__, ret);
- goto out_disable_parent;
- }
-
- phy->is_ref_clk_enabled = true;
- goto out;
-
-out_disable_parent:
- if (phy->ref_clk_parent)
- clk_disable_unprepare(phy->ref_clk_parent);
-out_disable_src:
- clk_disable_unprepare(phy->ref_clk_src);
-out:
- return ret;
-}
-
-static int ufs_qcom_phy_disable_vreg(struct device *dev,
- struct ufs_qcom_phy_vreg *vreg)
-{
- int ret = 0;
-
- if (!vreg || !vreg->enabled)
- goto out;
-
- ret = regulator_disable(vreg->reg);
-
- if (!ret) {
- /* ignore errors on applying disable config */
- ufs_qcom_phy_cfg_vreg(dev, vreg, false);
- vreg->enabled = false;
- } else {
- dev_err(dev, "%s: %s disable failed, err=%d\n",
- __func__, vreg->name, ret);
- }
-out:
- return ret;
-}
-
-static void ufs_qcom_phy_disable_ref_clk(struct ufs_qcom_phy *phy)
-{
- if (phy->is_ref_clk_enabled) {
- clk_disable_unprepare(phy->ref_clk);
- /*
- * "ref_clk_parent" is optional clock hence make sure that clk
- * reference is available before trying to disable the clock.
- */
- if (phy->ref_clk_parent)
- clk_disable_unprepare(phy->ref_clk_parent);
- clk_disable_unprepare(phy->ref_clk_src);
- phy->is_ref_clk_enabled = false;
- }
-}
-
-/* Turn ON M-PHY RMMI interface clocks */
-static int ufs_qcom_phy_enable_iface_clk(struct ufs_qcom_phy *phy)
-{
- int ret = 0;
-
- if (phy->is_iface_clk_enabled)
- goto out;
-
- ret = clk_prepare_enable(phy->tx_iface_clk);
- if (ret) {
- dev_err(phy->dev, "%s: tx_iface_clk enable failed %d\n",
- __func__, ret);
- goto out;
- }
- ret = clk_prepare_enable(phy->rx_iface_clk);
- if (ret) {
- clk_disable_unprepare(phy->tx_iface_clk);
- dev_err(phy->dev, "%s: rx_iface_clk enable failed %d. disabling also tx_iface_clk\n",
- __func__, ret);
- goto out;
- }
- phy->is_iface_clk_enabled = true;
-
-out:
- return ret;
-}
-
-/* Turn OFF M-PHY RMMI interface clocks */
-static void ufs_qcom_phy_disable_iface_clk(struct ufs_qcom_phy *phy)
-{
- if (phy->is_iface_clk_enabled) {
- clk_disable_unprepare(phy->tx_iface_clk);
- clk_disable_unprepare(phy->rx_iface_clk);
- phy->is_iface_clk_enabled = false;
- }
-}
-
-static int ufs_qcom_phy_start_serdes(struct ufs_qcom_phy *ufs_qcom_phy)
-{
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->start_serdes) {
- dev_err(ufs_qcom_phy->dev, "%s: start_serdes() callback is not supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ufs_qcom_phy->phy_spec_ops->start_serdes(ufs_qcom_phy);
- }
-
- return ret;
-}
-
-int ufs_qcom_phy_set_tx_lane_enable(struct phy *generic_phy, u32 tx_lanes)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
- int ret = 0;
-
- if (!ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable) {
- dev_err(ufs_qcom_phy->dev, "%s: set_tx_lane_enable() callback is not supported\n",
- __func__);
- ret = -ENOTSUPP;
- } else {
- ufs_qcom_phy->phy_spec_ops->set_tx_lane_enable(ufs_qcom_phy,
- tx_lanes);
- }
-
- return ret;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_set_tx_lane_enable);
-
-void ufs_qcom_phy_save_controller_version(struct phy *generic_phy,
- u8 major, u16 minor, u16 step)
-{
- struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
-
- ufs_qcom_phy->host_ctrl_rev_major = major;
- ufs_qcom_phy->host_ctrl_rev_minor = minor;
- ufs_qcom_phy->host_ctrl_rev_step = step;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_save_controller_version);
-
-static int ufs_qcom_phy_is_pcs_ready(struct ufs_qcom_phy *ufs_qcom_phy)
-{
- if (!ufs_qcom_phy->phy_spec_ops->is_physical_coding_sublayer_ready) {
- dev_err(ufs_qcom_phy->dev, "%s: is_physical_coding_sublayer_ready() callback is not supported\n",
- __func__);
- return -ENOTSUPP;
- }
-
- return ufs_qcom_phy->phy_spec_ops->
- is_physical_coding_sublayer_ready(ufs_qcom_phy);
-}
-
-int ufs_qcom_phy_power_on(struct phy *generic_phy)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
- struct device *dev = phy_common->dev;
- bool is_rate_B = false;
- int err;
-
- err = ufs_qcom_phy_get_reset(phy_common);
- if (err)
- return err;
-
- err = reset_control_assert(phy_common->ufs_reset);
- if (err)
- return err;
-
- if (phy_common->mode == PHY_MODE_UFS_HS_B)
- is_rate_B = true;
-
- err = phy_common->phy_spec_ops->calibrate(phy_common, is_rate_B);
- if (err)
- return err;
-
- err = reset_control_deassert(phy_common->ufs_reset);
- if (err) {
- dev_err(dev, "Failed to assert UFS PHY reset");
- return err;
- }
-
- err = ufs_qcom_phy_start_serdes(phy_common);
- if (err)
- return err;
-
- err = ufs_qcom_phy_is_pcs_ready(phy_common);
- if (err)
- return err;
-
- err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_phy);
- if (err) {
- dev_err(dev, "%s enable vdda_phy failed, err=%d\n",
- __func__, err);
- goto out;
- }
-
- phy_common->phy_spec_ops->power_control(phy_common, true);
-
- /* vdda_pll also enables ref clock LDOs so enable it first */
- err = ufs_qcom_phy_enable_vreg(dev, &phy_common->vdda_pll);
- if (err) {
- dev_err(dev, "%s enable vdda_pll failed, err=%d\n",
- __func__, err);
- goto out_disable_phy;
- }
-
- err = ufs_qcom_phy_enable_iface_clk(phy_common);
- if (err) {
- dev_err(dev, "%s enable phy iface clock failed, err=%d\n",
- __func__, err);
- goto out_disable_pll;
- }
-
- err = ufs_qcom_phy_enable_ref_clk(phy_common);
- if (err) {
- dev_err(dev, "%s enable phy ref clock failed, err=%d\n",
- __func__, err);
- goto out_disable_iface_clk;
- }
-
- /* enable device PHY ref_clk pad rail */
- if (phy_common->vddp_ref_clk.reg) {
- err = ufs_qcom_phy_enable_vreg(dev,
- &phy_common->vddp_ref_clk);
- if (err) {
- dev_err(dev, "%s enable vddp_ref_clk failed, err=%d\n",
- __func__, err);
- goto out_disable_ref_clk;
- }
- }
-
- goto out;
-
-out_disable_ref_clk:
- ufs_qcom_phy_disable_ref_clk(phy_common);
-out_disable_iface_clk:
- ufs_qcom_phy_disable_iface_clk(phy_common);
-out_disable_pll:
- ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_pll);
-out_disable_phy:
- ufs_qcom_phy_disable_vreg(dev, &phy_common->vdda_phy);
-out:
- return err;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_on);
-
-int ufs_qcom_phy_power_off(struct phy *generic_phy)
-{
- struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
-
- phy_common->phy_spec_ops->power_control(phy_common, false);
-
- if (phy_common->vddp_ref_clk.reg)
- ufs_qcom_phy_disable_vreg(phy_common->dev,
- &phy_common->vddp_ref_clk);
- ufs_qcom_phy_disable_ref_clk(phy_common);
- ufs_qcom_phy_disable_iface_clk(phy_common);
-
- ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_pll);
- ufs_qcom_phy_disable_vreg(phy_common->dev, &phy_common->vdda_phy);
- reset_control_assert(phy_common->ufs_reset);
- return 0;
-}
-EXPORT_SYMBOL_GPL(ufs_qcom_phy_power_off);
-
-MODULE_AUTHOR("Yaniv Gardi <ygardi@codeaurora.org>");
-MODULE_AUTHOR("Vivek Gautam <vivek.gautam@codeaurora.org>");
-MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY");
-MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/renesas/phy-rcar-gen3-usb2.c b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
index bfb22f868857..e34e4475027c 100644
--- a/drivers/phy/renesas/phy-rcar-gen3-usb2.c
+++ b/drivers/phy/renesas/phy-rcar-gen3-usb2.c
@@ -111,6 +111,7 @@ struct rcar_gen3_chan {
struct work_struct work;
struct mutex lock; /* protects rphys[...].powered */
enum usb_dr_mode dr_mode;
+ int irq;
bool extcon_host;
bool is_otg_channel;
bool uses_otg_pins;
@@ -389,12 +390,40 @@ static void rcar_gen3_init_otg(struct rcar_gen3_chan *ch)
rcar_gen3_device_recognition(ch);
}
+static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
+{
+ struct rcar_gen3_chan *ch = _ch;
+ void __iomem *usb2_base = ch->base;
+ u32 status = readl(usb2_base + USB2_OBINTSTA);
+ irqreturn_t ret = IRQ_NONE;
+
+ if (status & USB2_OBINT_BITS) {
+ dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
+ writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
+ rcar_gen3_device_recognition(ch);
+ ret = IRQ_HANDLED;
+ }
+
+ return ret;
+}
+
static int rcar_gen3_phy_usb2_init(struct phy *p)
{
struct rcar_gen3_phy *rphy = phy_get_drvdata(p);
struct rcar_gen3_chan *channel = rphy->ch;
void __iomem *usb2_base = channel->base;
u32 val;
+ int ret;
+
+ if (!rcar_gen3_is_any_rphy_initialized(channel) && channel->irq >= 0) {
+ INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
+ ret = request_irq(channel->irq, rcar_gen3_phy_usb2_irq,
+ IRQF_SHARED, dev_name(channel->dev), channel);
+ if (ret < 0) {
+ dev_err(channel->dev, "No irq handler (%d)\n", channel->irq);
+ return ret;
+ }
+ }
/* Initialize USB2 part */
val = readl(usb2_base + USB2_INT_ENABLE);
@@ -433,6 +462,9 @@ static int rcar_gen3_phy_usb2_exit(struct phy *p)
val &= ~USB2_INT_ENABLE_UCOM_INTEN;
writel(val, usb2_base + USB2_INT_ENABLE);
+ if (channel->irq >= 0 && !rcar_gen3_is_any_rphy_initialized(channel))
+ free_irq(channel->irq, channel);
+
return 0;
}
@@ -503,23 +535,6 @@ static const struct phy_ops rz_g1c_phy_usb2_ops = {
.owner = THIS_MODULE,
};
-static irqreturn_t rcar_gen3_phy_usb2_irq(int irq, void *_ch)
-{
- struct rcar_gen3_chan *ch = _ch;
- void __iomem *usb2_base = ch->base;
- u32 status = readl(usb2_base + USB2_OBINTSTA);
- irqreturn_t ret = IRQ_NONE;
-
- if (status & USB2_OBINT_BITS) {
- dev_vdbg(ch->dev, "%s: %08x\n", __func__, status);
- writel(USB2_OBINT_BITS, usb2_base + USB2_OBINTSTA);
- rcar_gen3_device_recognition(ch);
- ret = IRQ_HANDLED;
- }
-
- return ret;
-}
-
static const struct of_device_id rcar_gen3_phy_usb2_match_table[] = {
{
.compatible = "renesas,usb2-phy-r8a77470",
@@ -598,7 +613,7 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
struct phy_provider *provider;
struct resource *res;
const struct phy_ops *phy_usb2_ops;
- int irq, ret = 0, i;
+ int ret = 0, i;
if (!dev->of_node) {
dev_err(dev, "This driver needs device tree\n");
@@ -614,16 +629,8 @@ static int rcar_gen3_phy_usb2_probe(struct platform_device *pdev)
if (IS_ERR(channel->base))
return PTR_ERR(channel->base);
- /* call request_irq for OTG */
- irq = platform_get_irq_optional(pdev, 0);
- if (irq >= 0) {
- INIT_WORK(&channel->work, rcar_gen3_phy_usb2_work);
- irq = devm_request_irq(dev, irq, rcar_gen3_phy_usb2_irq,
- IRQF_SHARED, dev_name(dev), channel);
- if (irq < 0)
- dev_err(dev, "No irq handler (%d)\n", irq);
- }
-
+ /* get irq number here and request_irq for OTG in phy_init */
+ channel->irq = platform_get_irq_optional(pdev, 0);
channel->dr_mode = rcar_gen3_get_dr_mode(dev->of_node);
if (channel->dr_mode != USB_DR_MODE_UNKNOWN) {
int ret;
diff --git a/drivers/phy/rockchip/phy-rockchip-typec.c b/drivers/phy/rockchip/phy-rockchip-typec.c
index 24563160197f..70a31251b202 100644
--- a/drivers/phy/rockchip/phy-rockchip-typec.c
+++ b/drivers/phy/rockchip/phy-rockchip-typec.c
@@ -347,7 +347,7 @@ struct usb3phy_reg {
};
/**
- * struct rockchip_usb3phy_port_cfg: usb3-phy port configuration.
+ * struct rockchip_usb3phy_port_cfg - usb3-phy port configuration.
* @reg: the base address for usb3-phy config.
* @typec_conn_dir: the register of type-c connector direction.
* @usb3tousb2_en: the register of type-c force usb2 to usb2 enable.
diff --git a/drivers/phy/samsung/Kconfig b/drivers/phy/samsung/Kconfig
index 9e483d1fdaf2..e20d2fcc9fe7 100644
--- a/drivers/phy/samsung/Kconfig
+++ b/drivers/phy/samsung/Kconfig
@@ -3,23 +3,23 @@
# Phy drivers for Samsung platforms
#
config PHY_EXYNOS_DP_VIDEO
- tristate "EXYNOS SoC series Display Port PHY driver"
+ tristate "Exynos SoC series Display Port PHY driver"
depends on OF
depends on ARCH_EXYNOS || COMPILE_TEST
default ARCH_EXYNOS
select GENERIC_PHY
help
- Support for Display Port PHY found on Samsung EXYNOS SoCs.
+ Support for Display Port PHY found on Samsung Exynos SoCs.
config PHY_EXYNOS_MIPI_VIDEO
- tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver"
+ tristate "S5P/Exynos SoC series MIPI CSI-2/DSI PHY driver"
depends on HAS_IOMEM
depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
select GENERIC_PHY
default y if ARCH_S5PV210 || ARCH_EXYNOS
help
Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P
- and EXYNOS SoCs.
+ and Exynos SoCs.
config PHY_EXYNOS_PCIE
bool "Exynos PCIe PHY driver"
@@ -29,6 +29,15 @@ config PHY_EXYNOS_PCIE
Enable PCIe PHY support for Exynos SoC series.
This driver provides PHY interface for Exynos PCIe controller.
+config PHY_SAMSUNG_UFS
+ tristate "SAMSUNG SoC series UFS PHY driver"
+ depends on OF && (ARCH_EXYNOS || COMPILE_TEST)
+ select GENERIC_PHY
+ help
+ Enable this to support the Samsung UFS PHY driver for
+ Samsung SoCs. This driver provides the interface for UFS
+ host controller to do PHY related programming.
+
config PHY_SAMSUNG_USB2
tristate "Samsung USB 2.0 PHY driver"
depends on HAS_IOMEM
diff --git a/drivers/phy/samsung/Makefile b/drivers/phy/samsung/Makefile
index db9b1aa0de6e..3959100fe8a2 100644
--- a/drivers/phy/samsung/Makefile
+++ b/drivers/phy/samsung/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o
obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o
obj-$(CONFIG_PHY_EXYNOS_PCIE) += phy-exynos-pcie.o
+obj-$(CONFIG_PHY_SAMSUNG_UFS) += phy-samsung-ufs.o
obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-exynos-usb2.o
phy-exynos-usb2-y += phy-samsung-usb2.o
phy-exynos-usb2-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o
diff --git a/drivers/phy/samsung/phy-exynos-dp-video.c b/drivers/phy/samsung/phy-exynos-dp-video.c
index 6c607df1dc9a..2b670ef91deb 100644
--- a/drivers/phy/samsung/phy-exynos-dp-video.c
+++ b/drivers/phy/samsung/phy-exynos-dp-video.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Samsung EXYNOS SoC series Display Port PHY driver
+ * Samsung Exynos SoC series Display Port PHY driver
*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Author: Jingoo Han <jg1.han@samsung.com>
@@ -115,5 +115,5 @@ static struct platform_driver exynos_dp_video_phy_driver = {
module_platform_driver(exynos_dp_video_phy_driver);
MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>");
-MODULE_DESCRIPTION("Samsung EXYNOS SoC DP PHY driver");
+MODULE_DESCRIPTION("Samsung Exynos SoC DP PHY driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-exynos-mipi-video.c b/drivers/phy/samsung/phy-exynos-mipi-video.c
index bb51195f189f..c1df1ef3ee3c 100644
--- a/drivers/phy/samsung/phy-exynos-mipi-video.c
+++ b/drivers/phy/samsung/phy-exynos-mipi-video.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver
+ * Samsung S5P/Exynos SoC series MIPI CSIS/DSIM DPHY driver
*
* Copyright (C) 2013,2016 Samsung Electronics Co., Ltd.
* Author: Sylwester Nawrocki <s.nawrocki@samsung.com>
@@ -364,6 +364,6 @@ static struct platform_driver exynos_mipi_video_phy_driver = {
};
module_platform_driver(exynos_mipi_video_phy_driver);
-MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC MIPI CSI-2/DSI PHY driver");
+MODULE_DESCRIPTION("Samsung S5P/Exynos SoC MIPI CSI-2/DSI PHY driver");
MODULE_AUTHOR("Sylwester Nawrocki <s.nawrocki@samsung.com>");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-exynos-pcie.c b/drivers/phy/samsung/phy-exynos-pcie.c
index 659e7ae0a6cf..7e28b1aea0d1 100644
--- a/drivers/phy/samsung/phy-exynos-pcie.c
+++ b/drivers/phy/samsung/phy-exynos-pcie.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Samsung EXYNOS SoC series PCIe PHY driver
+ * Samsung Exynos SoC series PCIe PHY driver
*
* Phy provider for PCIe controller on Exynos SoC series
*
diff --git a/drivers/phy/samsung/phy-exynos5-usbdrd.c b/drivers/phy/samsung/phy-exynos5-usbdrd.c
index e510732afb8b..0d818b77a0d8 100644
--- a/drivers/phy/samsung/phy-exynos5-usbdrd.c
+++ b/drivers/phy/samsung/phy-exynos5-usbdrd.c
@@ -1,6 +1,6 @@
// SPDX-License-Identifier: GPL-2.0-only
/*
- * Samsung EXYNOS5 SoC series USB DRD PHY driver
+ * Samsung Exynos5 SoC series USB DRD PHY driver
*
* Phy provider for USB 3.0 DRD controller on Exynos5 SoC series
*
@@ -33,7 +33,7 @@
#define EXYNOS5_FSEL_24MHZ 0x5
#define EXYNOS5_FSEL_50MHZ 0x7
-/* EXYNOS5: USB 3.0 DRD PHY registers */
+/* Exynos5: USB 3.0 DRD PHY registers */
#define EXYNOS5_DRD_LINKSYSTEM 0x04
#define LINKSYSTEM_FLADJ_MASK (0x3f << 1)
@@ -180,14 +180,14 @@ struct exynos5_usbdrd_phy_drvdata {
* @utmiclk: clock for utmi+ phy
* @itpclk: clock for ITP generation
* @drv_data: pointer to SoC level driver data structure
- * @phys[]: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
+ * @phys: array for 'EXYNOS5_DRDPHYS_NUM' number of PHY
* instances each with its 'phy' and 'phy_cfg'.
* @extrefclk: frequency select settings when using 'separate
* reference clocks' for SS and HS operations
* @ref_clk: reference clock to PHY block from which PHY's
* operational clocks are derived
- * vbus: VBUS regulator for phy
- * vbus_boost: Boost regulator for VBUS present on few Exynos boards
+ * @vbus: VBUS regulator for phy
+ * @vbus_boost: Boost regulator for VBUS present on few Exynos boards
*/
struct exynos5_usbdrd_phy {
struct device *dev;
@@ -714,7 +714,9 @@ static int exynos5_usbdrd_phy_calibrate(struct phy *phy)
struct phy_usb_instance *inst = phy_get_drvdata(phy);
struct exynos5_usbdrd_phy *phy_drd = to_usbdrd_phy(inst);
- return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ if (inst->phy_cfg->id == EXYNOS5_DRDPHY_UTMI)
+ return exynos5420_usbdrd_phy_calibrate(phy_drd);
+ return 0;
}
static const struct phy_ops exynos5_usbdrd_phy_ops = {
@@ -958,7 +960,7 @@ static struct platform_driver exynos5_usb3drd_phy = {
};
module_platform_driver(exynos5_usb3drd_phy);
-MODULE_DESCRIPTION("Samsung EXYNOS5 SoCs USB 3.0 DRD controller PHY driver");
+MODULE_DESCRIPTION("Samsung Exynos5 SoCs USB 3.0 DRD controller PHY driver");
MODULE_AUTHOR("Vivek Gautam <gautam.vivek@samsung.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:exynos5_usb3drd_phy");
diff --git a/drivers/phy/samsung/phy-exynos7-ufs.h b/drivers/phy/samsung/phy-exynos7-ufs.h
new file mode 100644
index 000000000000..518923141958
--- /dev/null
+++ b/drivers/phy/samsung/phy-exynos7-ufs.h
@@ -0,0 +1,81 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver data for Samsung EXYNOS7 SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ */
+#ifndef _PHY_EXYNOS7_UFS_H_
+#define _PHY_EXYNOS7_UFS_H_
+
+#include "phy-samsung-ufs.h"
+
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL 0x720
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK 0x1
+#define EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN BIT(0)
+
+/* Calibration for phy initialization */
+static const struct samsung_ufs_phy_cfg exynos7_pre_init_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x84, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x035, 0x58, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x40, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x03b, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04c, 0x5b, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_ANY),
+ PHY_TRSV_REG_CFG(0x05c, 0x14, PWR_MODE_ANY),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B */
+static const struct samsung_ufs_phy_cfg exynos7_pre_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x00f, 0xfa, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x010, 0x82, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x011, 0x1e, PWR_MODE_HS_ANY),
+ /* Setting order: 1st(0x16, 2nd(0x15) */
+ PHY_COMN_REG_CFG(0x016, 0xff, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x015, 0x80, PWR_MODE_HS_ANY),
+ PHY_COMN_REG_CFG(0x017, 0x94, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x036, 0x32, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x037, 0x43, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x038, 0x3f, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x042, 0x88, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x042, 0xbb, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x043, 0xa6, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x048, 0x74, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x034, 0x35, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x034, 0x36, PWR_MODE_HS_G2_SER_B),
+ PHY_TRSV_REG_CFG(0x035, 0x5b, PWR_MODE_HS_G2_SER_A),
+ PHY_TRSV_REG_CFG(0x035, 0x5c, PWR_MODE_HS_G2_SER_B),
+ END_UFS_PHY_CFG
+};
+
+/* Calibration for HS mode series A/B atfer PMC */
+static const struct samsung_ufs_phy_cfg exynos7_post_pwr_hs_cfg[] = {
+ PHY_COMN_REG_CFG(0x015, 0x00, PWR_MODE_HS_ANY),
+ PHY_TRSV_REG_CFG(0x04d, 0x83, PWR_MODE_HS_ANY),
+ END_UFS_PHY_CFG
+};
+
+static const struct samsung_ufs_phy_cfg *exynos7_ufs_phy_cfgs[CFG_TAG_MAX] = {
+ [CFG_PRE_INIT] = exynos7_pre_init_cfg,
+ [CFG_PRE_PWR_HS] = exynos7_pre_pwr_hs_cfg,
+ [CFG_POST_PWR_HS] = exynos7_post_pwr_hs_cfg,
+};
+
+static struct samsung_ufs_phy_drvdata exynos7_ufs_phy = {
+ .cfg = exynos7_ufs_phy_cfgs,
+ .isol = {
+ .offset = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL,
+ .mask = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_MASK,
+ .en = EXYNOS7_EMBEDDED_COMBO_PHY_CTRL_EN,
+ },
+ .has_symbol_clk = 1,
+};
+
+#endif /* _PHY_EXYNOS7_UFS_H_ */
diff --git a/drivers/phy/samsung/phy-samsung-ufs.c b/drivers/phy/samsung/phy-samsung-ufs.c
new file mode 100644
index 000000000000..9832599a0283
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.c
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UFS PHY driver for Samsung SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "phy-samsung-ufs.h"
+
+#define for_each_phy_lane(phy, i) \
+ for (i = 0; i < (phy)->lane_cnt; i++)
+#define for_each_phy_cfg(cfg) \
+ for (; (cfg)->id; (cfg)++)
+
+#define PHY_DEF_LANE_CNT 1
+
+static void samsung_ufs_phy_config(struct samsung_ufs_phy *phy,
+ const struct samsung_ufs_phy_cfg *cfg,
+ u8 lane)
+{
+ enum {LANE_0, LANE_1}; /* lane index */
+
+ switch (lane) {
+ case LANE_0:
+ writel(cfg->val, (phy)->reg_pma + cfg->off_0);
+ break;
+ case LANE_1:
+ if (cfg->id == PHY_TRSV_BLK)
+ writel(cfg->val, (phy)->reg_pma + cfg->off_1);
+ break;
+ }
+}
+
+static int samsung_ufs_phy_wait_for_lock_acq(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ const unsigned int timeout_us = 100000;
+ const unsigned int sleep_us = 10;
+ u32 val;
+ int err;
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma + PHY_APB_ADDR(PHY_PLL_LOCK_STATUS),
+ val, (val & PHY_PLL_LOCK_BIT), sleep_us, timeout_us);
+ if (err) {
+ dev_err(ufs_phy->dev,
+ "failed to get phy pll lock acquisition %d\n", err);
+ goto out;
+ }
+
+ err = readl_poll_timeout(
+ ufs_phy->reg_pma + PHY_APB_ADDR(PHY_CDR_LOCK_STATUS),
+ val, (val & PHY_CDR_LOCK_BIT), sleep_us, timeout_us);
+ if (err)
+ dev_err(ufs_phy->dev,
+ "failed to get phy cdr lock acquisition %d\n", err);
+out:
+ return err;
+}
+
+static int samsung_ufs_phy_calibrate(struct phy *phy)
+{
+ struct samsung_ufs_phy *ufs_phy = get_samsung_ufs_phy(phy);
+ struct samsung_ufs_phy_cfg **cfgs = ufs_phy->cfg;
+ const struct samsung_ufs_phy_cfg *cfg;
+ int err = 0;
+ int i;
+
+ if (unlikely(ufs_phy->ufs_phy_state < CFG_PRE_INIT ||
+ ufs_phy->ufs_phy_state >= CFG_TAG_MAX)) {
+ dev_err(ufs_phy->dev, "invalid phy config index %d\n", ufs_phy->ufs_phy_state);
+ return -EINVAL;
+ }
+
+ cfg = cfgs[ufs_phy->ufs_phy_state];
+ if (!cfg)
+ goto out;
+
+ for_each_phy_cfg(cfg) {
+ for_each_phy_lane(ufs_phy, i) {
+ samsung_ufs_phy_config(ufs_phy, cfg, i);
+ }
+ }
+
+ if (ufs_phy->ufs_phy_state == CFG_POST_PWR_HS)
+ err = samsung_ufs_phy_wait_for_lock_acq(phy);
+
+ /**
+ * In Samsung ufshci, PHY need to be calibrated at different
+ * stages / state mainly before Linkstartup, after Linkstartup,
+ * before power mode change and after power mode change.
+ * Below state machine to make sure to calibrate PHY in each
+ * state. Here after configuring PHY in a given state, will
+ * change the state to next state so that next state phy
+ * calibration value can be programed
+ */
+out:
+ switch (ufs_phy->ufs_phy_state) {
+ case CFG_PRE_INIT:
+ ufs_phy->ufs_phy_state = CFG_POST_INIT;
+ break;
+ case CFG_POST_INIT:
+ ufs_phy->ufs_phy_state = CFG_PRE_PWR_HS;
+ break;
+ case CFG_PRE_PWR_HS:
+ ufs_phy->ufs_phy_state = CFG_POST_PWR_HS;
+ break;
+ case CFG_POST_PWR_HS:
+ /* Change back to INIT state */
+ ufs_phy->ufs_phy_state = CFG_PRE_INIT;
+ break;
+ default:
+ dev_err(ufs_phy->dev, "wrong state for phy calibration\n");
+ }
+
+ return err;
+}
+
+static int samsung_ufs_phy_symbol_clk_init(struct samsung_ufs_phy *phy)
+{
+ int ret;
+
+ phy->tx0_symbol_clk = devm_clk_get(phy->dev, "tx0_symbol_clk");
+ if (IS_ERR(phy->tx0_symbol_clk)) {
+ dev_err(phy->dev, "failed to get tx0_symbol_clk clock\n");
+ return PTR_ERR(phy->tx0_symbol_clk);
+ }
+
+ phy->rx0_symbol_clk = devm_clk_get(phy->dev, "rx0_symbol_clk");
+ if (IS_ERR(phy->rx0_symbol_clk)) {
+ dev_err(phy->dev, "failed to get rx0_symbol_clk clock\n");
+ return PTR_ERR(phy->rx0_symbol_clk);
+ }
+
+ phy->rx1_symbol_clk = devm_clk_get(phy->dev, "rx1_symbol_clk");
+ if (IS_ERR(phy->rx1_symbol_clk)) {
+ dev_err(phy->dev, "failed to get rx1_symbol_clk clock\n");
+ return PTR_ERR(phy->rx1_symbol_clk);
+ }
+
+ ret = clk_prepare_enable(phy->tx0_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: tx0_symbol_clk enable failed %d\n", __func__, ret);
+ goto out;
+ }
+
+ ret = clk_prepare_enable(phy->rx0_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: rx0_symbol_clk enable failed %d\n", __func__, ret);
+ goto out_disable_tx0_clk;
+ }
+
+ ret = clk_prepare_enable(phy->rx1_symbol_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: rx1_symbol_clk enable failed %d\n", __func__, ret);
+ goto out_disable_rx0_clk;
+ }
+
+ return 0;
+
+out_disable_rx0_clk:
+ clk_disable_unprepare(phy->rx0_symbol_clk);
+out_disable_tx0_clk:
+ clk_disable_unprepare(phy->tx0_symbol_clk);
+out:
+ return ret;
+}
+
+static int samsung_ufs_phy_clks_init(struct samsung_ufs_phy *phy)
+{
+ int ret;
+
+ phy->ref_clk = devm_clk_get(phy->dev, "ref_clk");
+ if (IS_ERR(phy->ref_clk))
+ dev_err(phy->dev, "failed to get ref_clk clock\n");
+
+ ret = clk_prepare_enable(phy->ref_clk);
+ if (ret) {
+ dev_err(phy->dev, "%s: ref_clk enable failed %d\n", __func__, ret);
+ return ret;
+ }
+
+ dev_dbg(phy->dev, "UFS MPHY ref_clk_rate = %ld\n", clk_get_rate(phy->ref_clk));
+
+ return 0;
+}
+
+static int samsung_ufs_phy_init(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+ int ret;
+
+ ss_phy->lane_cnt = phy->attrs.bus_width;
+ ss_phy->ufs_phy_state = CFG_PRE_INIT;
+
+ if (ss_phy->drvdata->has_symbol_clk) {
+ ret = samsung_ufs_phy_symbol_clk_init(ss_phy);
+ if (ret)
+ dev_err(ss_phy->dev, "failed to set ufs phy symbol clocks\n");
+ }
+
+ ret = samsung_ufs_phy_clks_init(ss_phy);
+ if (ret)
+ dev_err(ss_phy->dev, "failed to set ufs phy clocks\n");
+
+ ret = samsung_ufs_phy_calibrate(phy);
+ if (ret)
+ dev_err(ss_phy->dev, "ufs phy calibration failed\n");
+
+ return ret;
+}
+
+static int samsung_ufs_phy_power_on(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, false);
+ return 0;
+}
+
+static int samsung_ufs_phy_power_off(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ samsung_ufs_phy_ctrl_isol(ss_phy, true);
+ return 0;
+}
+
+static int samsung_ufs_phy_set_mode(struct phy *generic_phy,
+ enum phy_mode mode, int submode)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(generic_phy);
+
+ ss_phy->mode = PHY_MODE_INVALID;
+
+ if (mode > 0)
+ ss_phy->mode = mode;
+
+ return 0;
+}
+
+static int samsung_ufs_phy_exit(struct phy *phy)
+{
+ struct samsung_ufs_phy *ss_phy = get_samsung_ufs_phy(phy);
+
+ clk_disable_unprepare(ss_phy->ref_clk);
+
+ if (ss_phy->drvdata->has_symbol_clk) {
+ clk_disable_unprepare(ss_phy->tx0_symbol_clk);
+ clk_disable_unprepare(ss_phy->rx0_symbol_clk);
+ clk_disable_unprepare(ss_phy->rx1_symbol_clk);
+ }
+
+ return 0;
+}
+
+static struct phy_ops samsung_ufs_phy_ops = {
+ .init = samsung_ufs_phy_init,
+ .exit = samsung_ufs_phy_exit,
+ .power_on = samsung_ufs_phy_power_on,
+ .power_off = samsung_ufs_phy_power_off,
+ .calibrate = samsung_ufs_phy_calibrate,
+ .set_mode = samsung_ufs_phy_set_mode,
+ .owner = THIS_MODULE,
+};
+
+static const struct of_device_id samsung_ufs_phy_match[];
+
+static int samsung_ufs_phy_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ const struct of_device_id *match;
+ struct samsung_ufs_phy *phy;
+ struct phy *gen_phy;
+ struct phy_provider *phy_provider;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ int err = 0;
+
+ match = of_match_node(samsung_ufs_phy_match, dev->of_node);
+ if (!match) {
+ err = -EINVAL;
+ dev_err(dev, "failed to get match_node\n");
+ goto out;
+ }
+
+ phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
+ if (!phy) {
+ err = -ENOMEM;
+ goto out;
+ }
+
+ phy->reg_pma = devm_platform_ioremap_resource_byname(pdev, "phy-pma");
+ if (IS_ERR(phy->reg_pma)) {
+ err = PTR_ERR(phy->reg_pma);
+ goto out;
+ }
+
+ phy->reg_pmu = syscon_regmap_lookup_by_phandle(
+ dev->of_node, "samsung,pmu-syscon");
+ if (IS_ERR(phy->reg_pmu)) {
+ err = PTR_ERR(phy->reg_pmu);
+ dev_err(dev, "failed syscon remap for pmu\n");
+ goto out;
+ }
+
+ gen_phy = devm_phy_create(dev, NULL, &samsung_ufs_phy_ops);
+ if (IS_ERR(gen_phy)) {
+ err = PTR_ERR(gen_phy);
+ dev_err(dev, "failed to create PHY for ufs-phy\n");
+ goto out;
+ }
+
+ drvdata = match->data;
+ phy->dev = dev;
+ phy->drvdata = drvdata;
+ phy->cfg = (struct samsung_ufs_phy_cfg **)drvdata->cfg;
+ phy->isol = &drvdata->isol;
+ phy->lane_cnt = PHY_DEF_LANE_CNT;
+
+ phy_set_drvdata(gen_phy, phy);
+
+ phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
+ if (IS_ERR(phy_provider)) {
+ err = PTR_ERR(phy_provider);
+ dev_err(dev, "failed to register phy-provider\n");
+ goto out;
+ }
+out:
+ return err;
+}
+
+static const struct of_device_id samsung_ufs_phy_match[] = {
+ {
+ .compatible = "samsung,exynos7-ufs-phy",
+ .data = &exynos7_ufs_phy,
+ },
+ {},
+};
+MODULE_DEVICE_TABLE(of, samsung_ufs_phy_match);
+
+static struct platform_driver samsung_ufs_phy_driver = {
+ .probe = samsung_ufs_phy_probe,
+ .driver = {
+ .name = "samsung-ufs-phy",
+ .of_match_table = samsung_ufs_phy_match,
+ },
+};
+module_platform_driver(samsung_ufs_phy_driver);
+MODULE_DESCRIPTION("Samsung SoC UFS PHY Driver");
+MODULE_AUTHOR("Seungwon Jeon <essuuj@gmail.com>");
+MODULE_AUTHOR("Alim Akhtar <alim.akhtar@samsung.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/phy/samsung/phy-samsung-ufs.h b/drivers/phy/samsung/phy-samsung-ufs.h
new file mode 100644
index 000000000000..5de78710524c
--- /dev/null
+++ b/drivers/phy/samsung/phy-samsung-ufs.h
@@ -0,0 +1,139 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * UFS PHY driver for Samsung EXYNOS SoC
+ *
+ * Copyright (C) 2020 Samsung Electronics Co., Ltd.
+ * Author: Seungwon Jeon <essuuj@gmail.com>
+ * Author: Alim Akhtar <alim.akhtar@samsung.com>
+ *
+ */
+#ifndef _PHY_SAMSUNG_UFS_
+#define _PHY_SAMSUNG_UFS_
+
+#define PHY_COMN_BLK 1
+#define PHY_TRSV_BLK 2
+#define END_UFS_PHY_CFG { 0 }
+#define PHY_TRSV_CH_OFFSET 0x30
+#define PHY_APB_ADDR(off) ((off) << 2)
+
+#define PHY_COMN_REG_CFG(o, v, d) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = 0, \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_COMN_BLK, \
+}
+
+#define PHY_TRSV_REG_CFG(o, v, d) { \
+ .off_0 = PHY_APB_ADDR((o)), \
+ .off_1 = PHY_APB_ADDR((o) + PHY_TRSV_CH_OFFSET), \
+ .val = (v), \
+ .desc = (d), \
+ .id = PHY_TRSV_BLK, \
+}
+
+/* UFS PHY registers */
+#define PHY_PLL_LOCK_STATUS 0x1e
+#define PHY_CDR_LOCK_STATUS 0x5e
+
+#define PHY_PLL_LOCK_BIT BIT(5)
+#define PHY_CDR_LOCK_BIT BIT(4)
+
+/* description for PHY calibration */
+enum {
+ /* applicable to any */
+ PWR_DESC_ANY = 0,
+ /* mode */
+ PWR_DESC_PWM = 1,
+ PWR_DESC_HS = 2,
+ /* series */
+ PWR_DESC_SER_A = 1,
+ PWR_DESC_SER_B = 2,
+ /* gear */
+ PWR_DESC_G1 = 1,
+ PWR_DESC_G2 = 2,
+ PWR_DESC_G3 = 3,
+ /* field mask */
+ MD_MASK = 0x3,
+ SR_MASK = 0x3,
+ GR_MASK = 0x7,
+};
+
+#define PWR_MODE_HS_G1_ANY PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_ANY)
+#define PWR_MODE_HS_G1_SER_A PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G1_SER_B PWR_MODE_HS(PWR_DESC_G1, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G2_ANY PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_ANY)
+#define PWR_MODE_HS_G2_SER_A PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G2_SER_B PWR_MODE_HS(PWR_DESC_G2, PWR_DESC_SER_B)
+#define PWR_MODE_HS_G3_ANY PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_ANY)
+#define PWR_MODE_HS_G3_SER_A PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_A)
+#define PWR_MODE_HS_G3_SER_B PWR_MODE_HS(PWR_DESC_G3, PWR_DESC_SER_B)
+#define PWR_MODE(g, s, m) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | ((m) & MD_MASK))
+#define PWR_MODE_PWM_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_PWM)
+#define PWR_MODE_HS(g, s) ((((g) & GR_MASK) << 4) |\
+ (((s) & SR_MASK) << 2) | PWR_DESC_HS)
+#define PWR_MODE_HS_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_HS)
+#define PWR_MODE_ANY PWR_MODE(PWR_DESC_ANY,\
+ PWR_DESC_ANY, PWR_DESC_ANY)
+/* PHY calibration point/state */
+enum {
+ CFG_PRE_INIT,
+ CFG_POST_INIT,
+ CFG_PRE_PWR_HS,
+ CFG_POST_PWR_HS,
+ CFG_TAG_MAX,
+};
+
+struct samsung_ufs_phy_cfg {
+ u32 off_0;
+ u32 off_1;
+ u32 val;
+ u8 desc;
+ u8 id;
+};
+
+struct samsung_ufs_phy_drvdata {
+ const struct samsung_ufs_phy_cfg **cfg;
+ struct pmu_isol {
+ u32 offset;
+ u32 mask;
+ u32 en;
+ } isol;
+ bool has_symbol_clk;
+};
+
+struct samsung_ufs_phy {
+ struct device *dev;
+ void __iomem *reg_pma;
+ struct regmap *reg_pmu;
+ struct clk *ref_clk;
+ struct clk *ref_clk_parent;
+ struct clk *tx0_symbol_clk;
+ struct clk *rx0_symbol_clk;
+ struct clk *rx1_symbol_clk;
+ const struct samsung_ufs_phy_drvdata *drvdata;
+ struct samsung_ufs_phy_cfg **cfg;
+ const struct pmu_isol *isol;
+ u8 lane_cnt;
+ int ufs_phy_state;
+ enum phy_mode mode;
+};
+
+static inline struct samsung_ufs_phy *get_samsung_ufs_phy(struct phy *phy)
+{
+ return (struct samsung_ufs_phy *)phy_get_drvdata(phy);
+}
+
+static inline void samsung_ufs_phy_ctrl_isol(
+ struct samsung_ufs_phy *phy, u32 isol)
+{
+ regmap_update_bits(phy->reg_pmu, phy->isol->offset,
+ phy->isol->mask, isol ? 0 : phy->isol->en);
+}
+
+#include "phy-exynos7-ufs.h"
+
+#endif /* _PHY_SAMSUNG_UFS_ */
diff --git a/drivers/phy/samsung/phy-samsung-usb2.c b/drivers/phy/samsung/phy-samsung-usb2.c
index 090aa02e02de..a3ed3ff04690 100644
--- a/drivers/phy/samsung/phy-samsung-usb2.c
+++ b/drivers/phy/samsung/phy-samsung-usb2.c
@@ -255,7 +255,7 @@ static struct platform_driver samsung_usb2_phy_driver = {
};
module_platform_driver(samsung_usb2_phy_driver);
-MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver");
+MODULE_DESCRIPTION("Samsung S5P/Exynos SoC USB PHY driver");
MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:samsung-usb2-phy");
diff --git a/drivers/phy/st/phy-stm32-usbphyc.c b/drivers/phy/st/phy-stm32-usbphyc.c
index 56bdea4b0bd9..2b3639cba51a 100644
--- a/drivers/phy/st/phy-stm32-usbphyc.c
+++ b/drivers/phy/st/phy-stm32-usbphyc.c
@@ -327,7 +327,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
if (IS_ERR(usbphyc->base))
return PTR_ERR(usbphyc->base);
- usbphyc->clk = devm_clk_get(dev, 0);
+ usbphyc->clk = devm_clk_get(dev, NULL);
if (IS_ERR(usbphyc->clk)) {
ret = PTR_ERR(usbphyc->clk);
dev_err(dev, "clk get failed: %d\n", ret);
@@ -340,7 +340,7 @@ static int stm32_usbphyc_probe(struct platform_device *pdev)
return ret;
}
- usbphyc->rst = devm_reset_control_get(dev, 0);
+ usbphyc->rst = devm_reset_control_get(dev, NULL);
if (!IS_ERR(usbphyc->rst)) {
reset_control_assert(usbphyc->rst);
udelay(2);
diff --git a/drivers/phy/ti/phy-dm816x-usb.c b/drivers/phy/ti/phy-dm816x-usb.c
index 26f194779064..57adc08a89b2 100644
--- a/drivers/phy/ti/phy-dm816x-usb.c
+++ b/drivers/phy/ti/phy-dm816x-usb.c
@@ -82,17 +82,16 @@ static int dm816x_usb_phy_init(struct phy *x)
{
struct dm816x_usb_phy *phy = phy_get_drvdata(x);
unsigned int val;
- int error;
if (clk_get_rate(phy->refclk) != 24000000)
dev_warn(phy->dev, "nonstandard phy refclk\n");
/* Set PLL ref clock and put phys to sleep */
- error = regmap_update_bits(phy->syscon, phy->usb_ctrl,
- DM816X_USB_CTRL_PHYCLKSRC |
- DM816X_USB_CTRL_PHYSLEEP1 |
- DM816X_USB_CTRL_PHYSLEEP0,
- 0);
+ regmap_update_bits(phy->syscon, phy->usb_ctrl,
+ DM816X_USB_CTRL_PHYCLKSRC |
+ DM816X_USB_CTRL_PHYSLEEP1 |
+ DM816X_USB_CTRL_PHYSLEEP0,
+ 0);
regmap_read(phy->syscon, phy->usb_ctrl, &val);
if ((val & 3) != 0)
dev_info(phy->dev,
diff --git a/drivers/phy/ti/phy-ti-pipe3.c b/drivers/phy/ti/phy-ti-pipe3.c
index a87946589eb7..e9332c90f75f 100644
--- a/drivers/phy/ti/phy-ti-pipe3.c
+++ b/drivers/phy/ti/phy-ti-pipe3.c
@@ -337,7 +337,6 @@ static int ti_pipe3_power_on(struct phy *x)
{
u32 val;
u32 mask;
- int ret;
unsigned long rate;
struct ti_pipe3 *phy = phy_get_drvdata(x);
bool rx_pending = false;
@@ -355,8 +354,8 @@ static int ti_pipe3_power_on(struct phy *x)
rate = rate / 1000000;
mask = OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK;
val = rate << OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT;
- ret = regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
- mask, val);
+ regmap_update_bits(phy->phy_power_syscon, phy->power_reg,
+ mask, val);
/*
* For PCIe, TX and RX must be powered on simultaneously.
* For USB and SATA, TX must be powered on before RX
diff --git a/drivers/phy/xilinx/Kconfig b/drivers/phy/xilinx/Kconfig
new file mode 100644
index 000000000000..d8b0d46b2b4d
--- /dev/null
+++ b/drivers/phy/xilinx/Kconfig
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+#
+# PHY drivers for Xilinx platforms
+#
+
+config PHY_XILINX_ZYNQMP
+ tristate "Xilinx ZynqMP PHY driver"
+ depends on ARCH_ZYNQMP || COMPILE_TEST
+ select GENERIC_PHY
+ help
+ Enable this to support ZynqMP High Speed Gigabit Transceiver
+ that is part of ZynqMP SoC.
diff --git a/drivers/phy/xilinx/Makefile b/drivers/phy/xilinx/Makefile
new file mode 100644
index 000000000000..3f1f6a2a9b45
--- /dev/null
+++ b/drivers/phy/xilinx/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+
+obj-$(CONFIG_PHY_XILINX_ZYNQMP) += phy-zynqmp.o
diff --git a/drivers/phy/xilinx/phy-zynqmp.c b/drivers/phy/xilinx/phy-zynqmp.c
new file mode 100644
index 000000000000..2b0f921b6ee3
--- /dev/null
+++ b/drivers/phy/xilinx/phy-zynqmp.c
@@ -0,0 +1,993 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * phy-zynqmp.c - PHY driver for Xilinx ZynqMP GT.
+ *
+ * Copyright (C) 2018-2020 Xilinx Inc.
+ *
+ * Author: Anurag Kumar Vulisha <anuragku@xilinx.com>
+ * Author: Subbaraya Sundeep <sundeep.lkml@gmail.com>
+ * Author: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+ *
+ * This driver is tested for USB, SATA and Display Port currently.
+ * Other controllers PCIe and SGMII should also work but that is
+ * experimental as of now.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include <dt-bindings/phy/phy.h>
+
+/*
+ * Lane Registers
+ */
+
+/* TX De-emphasis parameters */
+#define L0_TX_ANA_TM_18 0x0048
+#define L0_TX_ANA_TM_118 0x01d8
+#define L0_TX_ANA_TM_118_FORCE_17_0 BIT(0)
+
+/* DN Resistor calibration code parameters */
+#define L0_TXPMA_ST_3 0x0b0c
+#define L0_DN_CALIB_CODE 0x3f
+
+/* PMA control parameters */
+#define L0_TXPMD_TM_45 0x0cb4
+#define L0_TXPMD_TM_48 0x0cc0
+#define L0_TXPMD_TM_45_OVER_DP_MAIN BIT(0)
+#define L0_TXPMD_TM_45_ENABLE_DP_MAIN BIT(1)
+#define L0_TXPMD_TM_45_OVER_DP_POST1 BIT(2)
+#define L0_TXPMD_TM_45_ENABLE_DP_POST1 BIT(3)
+#define L0_TXPMD_TM_45_OVER_DP_POST2 BIT(4)
+#define L0_TXPMD_TM_45_ENABLE_DP_POST2 BIT(5)
+
+/* PCS control parameters */
+#define L0_TM_DIG_6 0x106c
+#define L0_TM_DIS_DESCRAMBLE_DECODER 0x0f
+#define L0_TX_DIG_61 0x00f4
+#define L0_TM_DISABLE_SCRAMBLE_ENCODER 0x0f
+
+/* PLL Test Mode register parameters */
+#define L0_TM_PLL_DIG_37 0x2094
+#define L0_TM_COARSE_CODE_LIMIT 0x10
+
+/* PLL SSC step size offsets */
+#define L0_PLL_SS_STEPS_0_LSB 0x2368
+#define L0_PLL_SS_STEPS_1_MSB 0x236c
+#define L0_PLL_SS_STEP_SIZE_0_LSB 0x2370
+#define L0_PLL_SS_STEP_SIZE_1 0x2374
+#define L0_PLL_SS_STEP_SIZE_2 0x2378
+#define L0_PLL_SS_STEP_SIZE_3_MSB 0x237c
+#define L0_PLL_STATUS_READ_1 0x23e4
+
+/* SSC step size parameters */
+#define STEP_SIZE_0_MASK 0xff
+#define STEP_SIZE_1_MASK 0xff
+#define STEP_SIZE_2_MASK 0xff
+#define STEP_SIZE_3_MASK 0x3
+#define STEP_SIZE_SHIFT 8
+#define FORCE_STEP_SIZE 0x10
+#define FORCE_STEPS 0x20
+#define STEPS_0_MASK 0xff
+#define STEPS_1_MASK 0x07
+
+/* Reference clock selection parameters */
+#define L0_Ln_REF_CLK_SEL(n) (0x2860 + (n) * 4)
+#define L0_REF_CLK_SEL_MASK 0x8f
+
+/* Calibration digital logic parameters */
+#define L3_TM_CALIB_DIG19 0xec4c
+#define L3_CALIB_DONE_STATUS 0xef14
+#define L3_TM_CALIB_DIG18 0xec48
+#define L3_TM_CALIB_DIG19_NSW 0x07
+#define L3_TM_CALIB_DIG18_NSW 0xe0
+#define L3_TM_OVERRIDE_NSW_CODE 0x20
+#define L3_CALIB_DONE 0x02
+#define L3_NSW_SHIFT 5
+#define L3_NSW_PIPE_SHIFT 4
+#define L3_NSW_CALIB_SHIFT 3
+
+#define PHY_REG_OFFSET 0x4000
+
+/*
+ * Global Registers
+ */
+
+/* Refclk selection parameters */
+#define PLL_REF_SEL(n) (0x10000 + (n) * 4)
+#define PLL_FREQ_MASK 0x1f
+#define PLL_STATUS_LOCKED 0x10
+
+/* Inter Connect Matrix parameters */
+#define ICM_CFG0 0x10010
+#define ICM_CFG1 0x10014
+#define ICM_CFG0_L0_MASK 0x07
+#define ICM_CFG0_L1_MASK 0x70
+#define ICM_CFG1_L2_MASK 0x07
+#define ICM_CFG2_L3_MASK 0x70
+#define ICM_CFG_SHIFT 4
+
+/* Inter Connect Matrix allowed protocols */
+#define ICM_PROTOCOL_PD 0x0
+#define ICM_PROTOCOL_PCIE 0x1
+#define ICM_PROTOCOL_SATA 0x2
+#define ICM_PROTOCOL_USB 0x3
+#define ICM_PROTOCOL_DP 0x4
+#define ICM_PROTOCOL_SGMII 0x5
+
+/* Test Mode common reset control parameters */
+#define TM_CMN_RST 0x10018
+#define TM_CMN_RST_EN 0x1
+#define TM_CMN_RST_SET 0x2
+#define TM_CMN_RST_MASK 0x3
+
+/* Bus width parameters */
+#define TX_PROT_BUS_WIDTH 0x10040
+#define RX_PROT_BUS_WIDTH 0x10044
+#define PROT_BUS_WIDTH_10 0x0
+#define PROT_BUS_WIDTH_20 0x1
+#define PROT_BUS_WIDTH_40 0x2
+#define PROT_BUS_WIDTH_SHIFT 2
+
+/* Number of GT lanes */
+#define NUM_LANES 4
+
+/* SIOU SATA control register */
+#define SATA_CONTROL_OFFSET 0x0100
+
+/* Total number of controllers */
+#define CONTROLLERS_PER_LANE 5
+
+/* Protocol Type parameters */
+#define XPSGTR_TYPE_USB0 0 /* USB controller 0 */
+#define XPSGTR_TYPE_USB1 1 /* USB controller 1 */
+#define XPSGTR_TYPE_SATA_0 2 /* SATA controller lane 0 */
+#define XPSGTR_TYPE_SATA_1 3 /* SATA controller lane 1 */
+#define XPSGTR_TYPE_PCIE_0 4 /* PCIe controller lane 0 */
+#define XPSGTR_TYPE_PCIE_1 5 /* PCIe controller lane 1 */
+#define XPSGTR_TYPE_PCIE_2 6 /* PCIe controller lane 2 */
+#define XPSGTR_TYPE_PCIE_3 7 /* PCIe controller lane 3 */
+#define XPSGTR_TYPE_DP_0 8 /* Display Port controller lane 0 */
+#define XPSGTR_TYPE_DP_1 9 /* Display Port controller lane 1 */
+#define XPSGTR_TYPE_SGMII0 10 /* Ethernet SGMII controller 0 */
+#define XPSGTR_TYPE_SGMII1 11 /* Ethernet SGMII controller 1 */
+#define XPSGTR_TYPE_SGMII2 12 /* Ethernet SGMII controller 2 */
+#define XPSGTR_TYPE_SGMII3 13 /* Ethernet SGMII controller 3 */
+
+/* Timeout values */
+#define TIMEOUT_US 1000
+
+struct xpsgtr_dev;
+
+/**
+ * struct xpsgtr_ssc - structure to hold SSC settings for a lane
+ * @refclk_rate: PLL reference clock frequency
+ * @pll_ref_clk: value to be written to register for corresponding ref clk rate
+ * @steps: number of steps of SSC (Spread Spectrum Clock)
+ * @step_size: step size of each step
+ */
+struct xpsgtr_ssc {
+ u32 refclk_rate;
+ u8 pll_ref_clk;
+ u32 steps;
+ u32 step_size;
+};
+
+/**
+ * struct xpsgtr_phy - representation of a lane
+ * @phy: pointer to the kernel PHY device
+ * @type: controller which uses this lane
+ * @lane: lane number
+ * @protocol: protocol in which the lane operates
+ * @skip_phy_init: skip phy_init() if true
+ * @dev: pointer to the xpsgtr_dev instance
+ * @refclk: reference clock index
+ */
+struct xpsgtr_phy {
+ struct phy *phy;
+ u8 type;
+ u8 lane;
+ u8 protocol;
+ bool skip_phy_init;
+ struct xpsgtr_dev *dev;
+ unsigned int refclk;
+};
+
+/**
+ * struct xpsgtr_dev - representation of a ZynMP GT device
+ * @dev: pointer to device
+ * @serdes: serdes base address
+ * @siou: siou base address
+ * @gtr_mutex: mutex for locking
+ * @phys: PHY lanes
+ * @refclk_sscs: spread spectrum settings for the reference clocks
+ * @tx_term_fix: fix for GT issue
+ * @saved_icm_cfg0: stored value of ICM CFG0 register
+ * @saved_icm_cfg1: stored value of ICM CFG1 register
+ */
+struct xpsgtr_dev {
+ struct device *dev;
+ void __iomem *serdes;
+ void __iomem *siou;
+ struct mutex gtr_mutex; /* mutex for locking */
+ struct xpsgtr_phy phys[NUM_LANES];
+ const struct xpsgtr_ssc *refclk_sscs[NUM_LANES];
+ bool tx_term_fix;
+ unsigned int saved_icm_cfg0;
+ unsigned int saved_icm_cfg1;
+};
+
+/*
+ * Configuration Data
+ */
+
+/* lookup table to hold all settings needed for a ref clock frequency */
+static const struct xpsgtr_ssc ssc_lookup[] = {
+ { 19200000, 0x05, 608, 264020 },
+ { 20000000, 0x06, 634, 243454 },
+ { 24000000, 0x07, 760, 168973 },
+ { 26000000, 0x08, 824, 143860 },
+ { 27000000, 0x09, 856, 86551 },
+ { 38400000, 0x0a, 1218, 65896 },
+ { 40000000, 0x0b, 634, 243454 },
+ { 52000000, 0x0c, 824, 143860 },
+ { 100000000, 0x0d, 1058, 87533 },
+ { 108000000, 0x0e, 856, 86551 },
+ { 125000000, 0x0f, 992, 119497 },
+ { 135000000, 0x10, 1070, 55393 },
+ { 150000000, 0x11, 792, 187091 }
+};
+
+/*
+ * I/O Accessors
+ */
+
+static inline u32 xpsgtr_read(struct xpsgtr_dev *gtr_dev, u32 reg)
+{
+ return readl(gtr_dev->serdes + reg);
+}
+
+static inline void xpsgtr_write(struct xpsgtr_dev *gtr_dev, u32 reg, u32 value)
+{
+ writel(value, gtr_dev->serdes + reg);
+}
+
+static inline void xpsgtr_clr_set(struct xpsgtr_dev *gtr_dev, u32 reg,
+ u32 clr, u32 set)
+{
+ u32 value = xpsgtr_read(gtr_dev, reg);
+
+ value &= ~clr;
+ value |= set;
+ xpsgtr_write(gtr_dev, reg, value);
+}
+
+static inline u32 xpsgtr_read_phy(struct xpsgtr_phy *gtr_phy, u32 reg)
+{
+ void __iomem *addr = gtr_phy->dev->serdes
+ + gtr_phy->lane * PHY_REG_OFFSET + reg;
+
+ return readl(addr);
+}
+
+static inline void xpsgtr_write_phy(struct xpsgtr_phy *gtr_phy,
+ u32 reg, u32 value)
+{
+ void __iomem *addr = gtr_phy->dev->serdes
+ + gtr_phy->lane * PHY_REG_OFFSET + reg;
+
+ writel(value, addr);
+}
+
+static inline void xpsgtr_clr_set_phy(struct xpsgtr_phy *gtr_phy,
+ u32 reg, u32 clr, u32 set)
+{
+ void __iomem *addr = gtr_phy->dev->serdes
+ + gtr_phy->lane * PHY_REG_OFFSET + reg;
+
+ writel((readl(addr) & ~clr) | set, addr);
+}
+
+/*
+ * Hardware Configuration
+ */
+
+/* Wait for the PLL to lock (with a timeout). */
+static int xpsgtr_wait_pll_lock(struct phy *phy)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+ unsigned int timeout = TIMEOUT_US;
+ int ret;
+
+ dev_dbg(gtr_dev->dev, "Waiting for PLL lock\n");
+
+ while (1) {
+ u32 reg = xpsgtr_read_phy(gtr_phy, L0_PLL_STATUS_READ_1);
+
+ if ((reg & PLL_STATUS_LOCKED) == PLL_STATUS_LOCKED) {
+ ret = 0;
+ break;
+ }
+
+ if (--timeout == 0) {
+ ret = -ETIMEDOUT;
+ break;
+ }
+
+ udelay(1);
+ }
+
+ if (ret == -ETIMEDOUT)
+ dev_err(gtr_dev->dev,
+ "lane %u (type %u, protocol %u): PLL lock timeout\n",
+ gtr_phy->lane, gtr_phy->type, gtr_phy->protocol);
+
+ return ret;
+}
+
+/* Configure PLL and spread-sprectrum clock. */
+static void xpsgtr_configure_pll(struct xpsgtr_phy *gtr_phy)
+{
+ const struct xpsgtr_ssc *ssc;
+ u32 step_size;
+
+ ssc = gtr_phy->dev->refclk_sscs[gtr_phy->refclk];
+ step_size = ssc->step_size;
+
+ xpsgtr_clr_set(gtr_phy->dev, PLL_REF_SEL(gtr_phy->lane),
+ PLL_FREQ_MASK, ssc->pll_ref_clk);
+
+ /* Enable lane clock sharing, if required */
+ if (gtr_phy->refclk != gtr_phy->lane) {
+ /* Lane3 Ref Clock Selection Register */
+ xpsgtr_clr_set(gtr_phy->dev, L0_Ln_REF_CLK_SEL(gtr_phy->lane),
+ L0_REF_CLK_SEL_MASK, 1 << gtr_phy->refclk);
+ }
+
+ /* SSC step size [7:0] */
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_0_LSB,
+ STEP_SIZE_0_MASK, step_size & STEP_SIZE_0_MASK);
+
+ /* SSC step size [15:8] */
+ step_size >>= STEP_SIZE_SHIFT;
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_1,
+ STEP_SIZE_1_MASK, step_size & STEP_SIZE_1_MASK);
+
+ /* SSC step size [23:16] */
+ step_size >>= STEP_SIZE_SHIFT;
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_2,
+ STEP_SIZE_2_MASK, step_size & STEP_SIZE_2_MASK);
+
+ /* SSC steps [7:0] */
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_0_LSB,
+ STEPS_0_MASK, ssc->steps & STEPS_0_MASK);
+
+ /* SSC steps [10:8] */
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEPS_1_MSB,
+ STEPS_1_MASK,
+ (ssc->steps >> STEP_SIZE_SHIFT) & STEPS_1_MASK);
+
+ /* SSC step size [24:25] */
+ step_size >>= STEP_SIZE_SHIFT;
+ xpsgtr_clr_set_phy(gtr_phy, L0_PLL_SS_STEP_SIZE_3_MSB,
+ STEP_SIZE_3_MASK, (step_size & STEP_SIZE_3_MASK) |
+ FORCE_STEP_SIZE | FORCE_STEPS);
+}
+
+/* Configure the lane protocol. */
+static void xpsgtr_lane_set_protocol(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+ u8 protocol = gtr_phy->protocol;
+
+ switch (gtr_phy->lane) {
+ case 0:
+ xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L0_MASK, protocol);
+ break;
+ case 1:
+ xpsgtr_clr_set(gtr_dev, ICM_CFG0, ICM_CFG0_L1_MASK,
+ protocol << ICM_CFG_SHIFT);
+ break;
+ case 2:
+ xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L0_MASK, protocol);
+ break;
+ case 3:
+ xpsgtr_clr_set(gtr_dev, ICM_CFG1, ICM_CFG0_L1_MASK,
+ protocol << ICM_CFG_SHIFT);
+ break;
+ default:
+ /* We already checked 0 <= lane <= 3 */
+ break;
+ }
+}
+
+/* Bypass (de)scrambler and 8b/10b decoder and encoder. */
+static void xpsgtr_bypass_scrambler_8b10b(struct xpsgtr_phy *gtr_phy)
+{
+ xpsgtr_write_phy(gtr_phy, L0_TM_DIG_6, L0_TM_DIS_DESCRAMBLE_DECODER);
+ xpsgtr_write_phy(gtr_phy, L0_TX_DIG_61, L0_TM_DISABLE_SCRAMBLE_ENCODER);
+}
+
+/* DP-specific initialization. */
+static void xpsgtr_phy_init_dp(struct xpsgtr_phy *gtr_phy)
+{
+ xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_45,
+ L0_TXPMD_TM_45_OVER_DP_MAIN |
+ L0_TXPMD_TM_45_ENABLE_DP_MAIN |
+ L0_TXPMD_TM_45_OVER_DP_POST1 |
+ L0_TXPMD_TM_45_OVER_DP_POST2 |
+ L0_TXPMD_TM_45_ENABLE_DP_POST2);
+ xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_118,
+ L0_TX_ANA_TM_118_FORCE_17_0);
+}
+
+/* SATA-specific initialization. */
+static void xpsgtr_phy_init_sata(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+
+ xpsgtr_bypass_scrambler_8b10b(gtr_phy);
+
+ writel(gtr_phy->lane, gtr_dev->siou + SATA_CONTROL_OFFSET);
+}
+
+/* SGMII-specific initialization. */
+static void xpsgtr_phy_init_sgmii(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+
+ /* Set SGMII protocol TX and RX bus width to 10 bits. */
+ xpsgtr_write(gtr_dev, TX_PROT_BUS_WIDTH,
+ PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+ xpsgtr_write(gtr_dev, RX_PROT_BUS_WIDTH,
+ PROT_BUS_WIDTH_10 << (gtr_phy->lane * PROT_BUS_WIDTH_SHIFT));
+
+ xpsgtr_bypass_scrambler_8b10b(gtr_phy);
+}
+
+/* Configure TX de-emphasis and margining for DP. */
+static void xpsgtr_phy_configure_dp(struct xpsgtr_phy *gtr_phy, unsigned int pre,
+ unsigned int voltage)
+{
+ static const u8 voltage_swing[4][4] = {
+ { 0x2a, 0x27, 0x24, 0x20 },
+ { 0x27, 0x23, 0x20, 0xff },
+ { 0x24, 0x20, 0xff, 0xff },
+ { 0xff, 0xff, 0xff, 0xff }
+ };
+ static const u8 pre_emphasis[4][4] = {
+ { 0x02, 0x02, 0x02, 0x02 },
+ { 0x01, 0x01, 0x01, 0xff },
+ { 0x00, 0x00, 0xff, 0xff },
+ { 0xff, 0xff, 0xff, 0xff }
+ };
+
+ xpsgtr_write_phy(gtr_phy, L0_TXPMD_TM_48, voltage_swing[pre][voltage]);
+ xpsgtr_write_phy(gtr_phy, L0_TX_ANA_TM_18, pre_emphasis[pre][voltage]);
+}
+
+/*
+ * PHY Operations
+ */
+
+static bool xpsgtr_phy_init_required(struct xpsgtr_phy *gtr_phy)
+{
+ /*
+ * As USB may save the snapshot of the states during hibernation, doing
+ * phy_init() will put the USB controller into reset, resulting in the
+ * losing of the saved snapshot. So try to avoid phy_init() for USB
+ * except when gtr_phy->skip_phy_init is false (this happens when FPD is
+ * shutdown during suspend or when gt lane is changed from current one)
+ */
+ if (gtr_phy->protocol == ICM_PROTOCOL_USB && gtr_phy->skip_phy_init)
+ return false;
+ else
+ return true;
+}
+
+/*
+ * There is a functional issue in the GT. The TX termination resistance can be
+ * out of spec due to a issue in the calibration logic. This is the workaround
+ * to fix it, required for XCZU9EG silicon.
+ */
+static int xpsgtr_phy_tx_term_fix(struct xpsgtr_phy *gtr_phy)
+{
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+ u32 timeout = TIMEOUT_US;
+ u32 nsw;
+
+ /* Enabling Test Mode control for CMN Rest */
+ xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
+
+ /* Set Test Mode reset */
+ xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
+
+ xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18, 0x00);
+ xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, L3_TM_OVERRIDE_NSW_CODE);
+
+ /*
+ * As a part of work around sequence for PMOS calibration fix,
+ * we need to configure any lane ICM_CFG to valid protocol. This
+ * will deassert the CMN_Resetn signal.
+ */
+ xpsgtr_lane_set_protocol(gtr_phy);
+
+ /* Clear Test Mode reset */
+ xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
+
+ dev_dbg(gtr_dev->dev, "calibrating...\n");
+
+ do {
+ u32 reg = xpsgtr_read(gtr_dev, L3_CALIB_DONE_STATUS);
+
+ if ((reg & L3_CALIB_DONE) == L3_CALIB_DONE)
+ break;
+
+ if (!--timeout) {
+ dev_err(gtr_dev->dev, "calibration time out\n");
+ return -ETIMEDOUT;
+ }
+
+ udelay(1);
+ } while (timeout > 0);
+
+ dev_dbg(gtr_dev->dev, "calibration done\n");
+
+ /* Reading NMOS Register Code */
+ nsw = xpsgtr_read(gtr_dev, L0_TXPMA_ST_3) & L0_DN_CALIB_CODE;
+
+ /* Set Test Mode reset */
+ xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_EN);
+
+ /* Writing NMOS register values back [5:3] */
+ xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG19, nsw >> L3_NSW_CALIB_SHIFT);
+
+ /* Writing NMOS register value [2:0] */
+ xpsgtr_write(gtr_dev, L3_TM_CALIB_DIG18,
+ ((nsw & L3_TM_CALIB_DIG19_NSW) << L3_NSW_SHIFT) |
+ (1 << L3_NSW_PIPE_SHIFT));
+
+ /* Clear Test Mode reset */
+ xpsgtr_clr_set(gtr_dev, TM_CMN_RST, TM_CMN_RST_MASK, TM_CMN_RST_SET);
+
+ return 0;
+}
+
+static int xpsgtr_phy_init(struct phy *phy)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+ struct xpsgtr_dev *gtr_dev = gtr_phy->dev;
+ int ret = 0;
+
+ mutex_lock(&gtr_dev->gtr_mutex);
+
+ /* Skip initialization if not required. */
+ if (!xpsgtr_phy_init_required(gtr_phy))
+ goto out;
+
+ if (gtr_dev->tx_term_fix) {
+ ret = xpsgtr_phy_tx_term_fix(gtr_phy);
+ if (ret < 0)
+ goto out;
+
+ gtr_dev->tx_term_fix = false;
+ }
+
+ /* Enable coarse code saturation limiting logic. */
+ xpsgtr_write_phy(gtr_phy, L0_TM_PLL_DIG_37, L0_TM_COARSE_CODE_LIMIT);
+
+ /*
+ * Configure the PLL, the lane protocol, and perform protocol-specific
+ * initialization.
+ */
+ xpsgtr_configure_pll(gtr_phy);
+ xpsgtr_lane_set_protocol(gtr_phy);
+
+ switch (gtr_phy->protocol) {
+ case ICM_PROTOCOL_DP:
+ xpsgtr_phy_init_dp(gtr_phy);
+ break;
+
+ case ICM_PROTOCOL_SATA:
+ xpsgtr_phy_init_sata(gtr_phy);
+ break;
+
+ case ICM_PROTOCOL_SGMII:
+ xpsgtr_phy_init_sgmii(gtr_phy);
+ break;
+ }
+
+out:
+ mutex_unlock(&gtr_dev->gtr_mutex);
+ return ret;
+}
+
+static int xpsgtr_phy_exit(struct phy *phy)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+
+ gtr_phy->skip_phy_init = false;
+
+ return 0;
+}
+
+static int xpsgtr_phy_power_on(struct phy *phy)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+ int ret = 0;
+
+ /*
+ * Wait for the PLL to lock. For DP, only wait on DP0 to avoid
+ * cumulating waits for both lanes. The user is expected to initialize
+ * lane 0 last.
+ */
+ if (gtr_phy->protocol != ICM_PROTOCOL_DP ||
+ gtr_phy->type == XPSGTR_TYPE_DP_0)
+ ret = xpsgtr_wait_pll_lock(phy);
+
+ return ret;
+}
+
+static int xpsgtr_phy_configure(struct phy *phy, union phy_configure_opts *opts)
+{
+ struct xpsgtr_phy *gtr_phy = phy_get_drvdata(phy);
+
+ if (gtr_phy->protocol != ICM_PROTOCOL_DP)
+ return 0;
+
+ xpsgtr_phy_configure_dp(gtr_phy, opts->dp.pre[0], opts->dp.voltage[0]);
+
+ return 0;
+}
+
+static const struct phy_ops xpsgtr_phyops = {
+ .init = xpsgtr_phy_init,
+ .exit = xpsgtr_phy_exit,
+ .power_on = xpsgtr_phy_power_on,
+ .configure = xpsgtr_phy_configure,
+ .owner = THIS_MODULE,
+};
+
+/*
+ * OF Xlate Support
+ */
+
+/* Set the lane type and protocol based on the PHY type and instance number. */
+static int xpsgtr_set_lane_type(struct xpsgtr_phy *gtr_phy, u8 phy_type,
+ unsigned int phy_instance)
+{
+ unsigned int num_phy_types;
+ const int *phy_types;
+
+ switch (phy_type) {
+ case PHY_TYPE_SATA: {
+ static const int types[] = {
+ XPSGTR_TYPE_SATA_0,
+ XPSGTR_TYPE_SATA_1,
+ };
+
+ phy_types = types;
+ num_phy_types = ARRAY_SIZE(types);
+ gtr_phy->protocol = ICM_PROTOCOL_SATA;
+ break;
+ }
+ case PHY_TYPE_USB3: {
+ static const int types[] = {
+ XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_USB1,
+ };
+
+ phy_types = types;
+ num_phy_types = ARRAY_SIZE(types);
+ gtr_phy->protocol = ICM_PROTOCOL_USB;
+ break;
+ }
+ case PHY_TYPE_DP: {
+ static const int types[] = {
+ XPSGTR_TYPE_DP_0,
+ XPSGTR_TYPE_DP_1,
+ };
+
+ phy_types = types;
+ num_phy_types = ARRAY_SIZE(types);
+ gtr_phy->protocol = ICM_PROTOCOL_DP;
+ break;
+ }
+ case PHY_TYPE_PCIE: {
+ static const int types[] = {
+ XPSGTR_TYPE_PCIE_0,
+ XPSGTR_TYPE_PCIE_1,
+ XPSGTR_TYPE_PCIE_2,
+ XPSGTR_TYPE_PCIE_3,
+ };
+
+ phy_types = types;
+ num_phy_types = ARRAY_SIZE(types);
+ gtr_phy->protocol = ICM_PROTOCOL_PCIE;
+ break;
+ }
+ case PHY_TYPE_SGMII: {
+ static const int types[] = {
+ XPSGTR_TYPE_SGMII0,
+ XPSGTR_TYPE_SGMII1,
+ XPSGTR_TYPE_SGMII2,
+ XPSGTR_TYPE_SGMII3,
+ };
+
+ phy_types = types;
+ num_phy_types = ARRAY_SIZE(types);
+ gtr_phy->protocol = ICM_PROTOCOL_SGMII;
+ break;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ if (phy_instance >= num_phy_types)
+ return -EINVAL;
+
+ gtr_phy->type = phy_types[phy_instance];
+ return 0;
+}
+
+/*
+ * Valid combinations of controllers and lanes (Interconnect Matrix).
+ */
+static const unsigned int icm_matrix[NUM_LANES][CONTROLLERS_PER_LANE] = {
+ { XPSGTR_TYPE_PCIE_0, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII0 },
+ { XPSGTR_TYPE_PCIE_1, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII1 },
+ { XPSGTR_TYPE_PCIE_2, XPSGTR_TYPE_SATA_0, XPSGTR_TYPE_USB0,
+ XPSGTR_TYPE_DP_1, XPSGTR_TYPE_SGMII2 },
+ { XPSGTR_TYPE_PCIE_3, XPSGTR_TYPE_SATA_1, XPSGTR_TYPE_USB1,
+ XPSGTR_TYPE_DP_0, XPSGTR_TYPE_SGMII3 }
+};
+
+/* Translate OF phandle and args to PHY instance. */
+static struct phy *xpsgtr_xlate(struct device *dev,
+ struct of_phandle_args *args)
+{
+ struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
+ struct xpsgtr_phy *gtr_phy;
+ unsigned int phy_instance;
+ unsigned int phy_lane;
+ unsigned int phy_type;
+ unsigned int refclk;
+ unsigned int i;
+ int ret;
+
+ if (args->args_count != 4) {
+ dev_err(dev, "Invalid number of cells in 'phy' property\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ /*
+ * Get the PHY parameters from the OF arguments and derive the lane
+ * type.
+ */
+ phy_lane = args->args[0];
+ if (phy_lane >= ARRAY_SIZE(gtr_dev->phys)) {
+ dev_err(dev, "Invalid lane number %u\n", phy_lane);
+ return ERR_PTR(-ENODEV);
+ }
+
+ gtr_phy = &gtr_dev->phys[phy_lane];
+ phy_type = args->args[1];
+ phy_instance = args->args[2];
+
+ ret = xpsgtr_set_lane_type(gtr_phy, phy_type, phy_instance);
+ if (ret < 0) {
+ dev_err(gtr_dev->dev, "Invalid PHY type and/or instance\n");
+ return ERR_PTR(ret);
+ }
+
+ refclk = args->args[3];
+ if (refclk >= ARRAY_SIZE(gtr_dev->refclk_sscs) ||
+ !gtr_dev->refclk_sscs[refclk]) {
+ dev_err(dev, "Invalid reference clock number %u\n", refclk);
+ return ERR_PTR(-EINVAL);
+ }
+
+ gtr_phy->refclk = refclk;
+
+ /*
+ * Ensure that the Interconnect Matrix is obeyed, i.e a given lane type
+ * is allowed to operate on the lane.
+ */
+ for (i = 0; i < CONTROLLERS_PER_LANE; i++) {
+ if (icm_matrix[phy_lane][i] == gtr_phy->type)
+ return gtr_phy->phy;
+ }
+
+ return ERR_PTR(-EINVAL);
+}
+
+/*
+ * Power Management
+ */
+
+static int __maybe_unused xpsgtr_suspend(struct device *dev)
+{
+ struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
+
+ /* Save the snapshot ICM_CFG registers. */
+ gtr_dev->saved_icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
+ gtr_dev->saved_icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
+
+ return 0;
+}
+
+static int __maybe_unused xpsgtr_resume(struct device *dev)
+{
+ struct xpsgtr_dev *gtr_dev = dev_get_drvdata(dev);
+ unsigned int icm_cfg0, icm_cfg1;
+ unsigned int i;
+ bool skip_phy_init;
+
+ icm_cfg0 = xpsgtr_read(gtr_dev, ICM_CFG0);
+ icm_cfg1 = xpsgtr_read(gtr_dev, ICM_CFG1);
+
+ /* Return if no GT lanes got configured before suspend. */
+ if (!gtr_dev->saved_icm_cfg0 && !gtr_dev->saved_icm_cfg1)
+ return 0;
+
+ /* Check if the ICM configurations changed after suspend. */
+ if (icm_cfg0 == gtr_dev->saved_icm_cfg0 &&
+ icm_cfg1 == gtr_dev->saved_icm_cfg1)
+ skip_phy_init = true;
+ else
+ skip_phy_init = false;
+
+ /* Update the skip_phy_init for all gtr_phy instances. */
+ for (i = 0; i < ARRAY_SIZE(gtr_dev->phys); i++)
+ gtr_dev->phys[i].skip_phy_init = skip_phy_init;
+
+ return 0;
+}
+
+static const struct dev_pm_ops xpsgtr_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(xpsgtr_suspend, xpsgtr_resume)
+};
+
+/*
+ * Probe & Platform Driver
+ */
+
+static int xpsgtr_get_ref_clocks(struct xpsgtr_dev *gtr_dev)
+{
+ unsigned int refclk;
+
+ for (refclk = 0; refclk < ARRAY_SIZE(gtr_dev->refclk_sscs); ++refclk) {
+ unsigned long rate;
+ unsigned int i;
+ struct clk *clk;
+ char name[8];
+
+ snprintf(name, sizeof(name), "ref%u", refclk);
+ clk = devm_clk_get_optional(gtr_dev->dev, name);
+ if (IS_ERR(clk)) {
+ if (PTR_ERR(clk) != -EPROBE_DEFER)
+ dev_err(gtr_dev->dev,
+ "Failed to get reference clock %u: %ld\n",
+ refclk, PTR_ERR(clk));
+ return PTR_ERR(clk);
+ }
+
+ if (!clk)
+ continue;
+
+ /*
+ * Get the spread spectrum (SSC) settings for the reference
+ * clock rate.
+ */
+ rate = clk_get_rate(clk);
+
+ for (i = 0 ; i < ARRAY_SIZE(ssc_lookup); i++) {
+ if (rate == ssc_lookup[i].refclk_rate) {
+ gtr_dev->refclk_sscs[refclk] = &ssc_lookup[i];
+ break;
+ }
+ }
+
+ if (i == ARRAY_SIZE(ssc_lookup)) {
+ dev_err(gtr_dev->dev,
+ "Invalid rate %lu for reference clock %u\n",
+ rate, refclk);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
+static int xpsgtr_probe(struct platform_device *pdev)
+{
+ struct device_node *np = pdev->dev.of_node;
+ struct xpsgtr_dev *gtr_dev;
+ struct phy_provider *provider;
+ unsigned int port;
+ int ret;
+
+ gtr_dev = devm_kzalloc(&pdev->dev, sizeof(*gtr_dev), GFP_KERNEL);
+ if (!gtr_dev)
+ return -ENOMEM;
+
+ gtr_dev->dev = &pdev->dev;
+ platform_set_drvdata(pdev, gtr_dev);
+
+ mutex_init(&gtr_dev->gtr_mutex);
+
+ if (of_device_is_compatible(np, "xlnx,zynqmp-psgtr"))
+ gtr_dev->tx_term_fix =
+ of_property_read_bool(np, "xlnx,tx-termination-fix");
+
+ /* Acquire resources. */
+ gtr_dev->serdes = devm_platform_ioremap_resource_byname(pdev, "serdes");
+ if (IS_ERR(gtr_dev->serdes))
+ return PTR_ERR(gtr_dev->serdes);
+
+ gtr_dev->siou = devm_platform_ioremap_resource_byname(pdev, "siou");
+ if (IS_ERR(gtr_dev->siou))
+ return PTR_ERR(gtr_dev->siou);
+
+ ret = xpsgtr_get_ref_clocks(gtr_dev);
+ if (ret)
+ return ret;
+
+ /* Create PHYs. */
+ for (port = 0; port < ARRAY_SIZE(gtr_dev->phys); ++port) {
+ struct xpsgtr_phy *gtr_phy = &gtr_dev->phys[port];
+ struct phy *phy;
+
+ gtr_phy->lane = port;
+ gtr_phy->dev = gtr_dev;
+
+ phy = devm_phy_create(&pdev->dev, np, &xpsgtr_phyops);
+ if (IS_ERR(phy)) {
+ dev_err(&pdev->dev, "failed to create PHY\n");
+ return PTR_ERR(phy);
+ }
+
+ gtr_phy->phy = phy;
+ phy_set_drvdata(phy, gtr_phy);
+ }
+
+ /* Register the PHY provider. */
+ provider = devm_of_phy_provider_register(&pdev->dev, xpsgtr_xlate);
+ if (IS_ERR(provider)) {
+ dev_err(&pdev->dev, "registering provider failed\n");
+ return PTR_ERR(provider);
+ }
+ return 0;
+}
+
+static const struct of_device_id xpsgtr_of_match[] = {
+ { .compatible = "xlnx,zynqmp-psgtr", },
+ { .compatible = "xlnx,zynqmp-psgtr-v1.1", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, xpsgtr_of_match);
+
+static struct platform_driver xpsgtr_driver = {
+ .probe = xpsgtr_probe,
+ .driver = {
+ .name = "xilinx-psgtr",
+ .of_match_table = xpsgtr_of_match,
+ .pm = &xpsgtr_pm_ops,
+ },
+};
+
+module_platform_driver(xpsgtr_driver);
+
+MODULE_AUTHOR("Xilinx Inc.");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("Xilinx ZynqMP High speed Gigabit Transceiver");
diff --git a/drivers/soundwire/Makefile b/drivers/soundwire/Makefile
index b5871612613b..7c53ffae9f50 100644
--- a/drivers/soundwire/Makefile
+++ b/drivers/soundwire/Makefile
@@ -4,22 +4,22 @@
#
#Bus Objs
-soundwire-bus-objs := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o \
+soundwire-bus-y := bus_type.o bus.o master.o slave.o mipi_disco.o stream.o \
sysfs_slave.o sysfs_slave_dpn.o
obj-$(CONFIG_SOUNDWIRE) += soundwire-bus.o
ifdef CONFIG_DEBUG_FS
-soundwire-bus-objs += debugfs.o
+soundwire-bus-y += debugfs.o
endif
#Cadence Objs
-soundwire-cadence-objs := cadence_master.o
+soundwire-cadence-y := cadence_master.o
obj-$(CONFIG_SOUNDWIRE_CADENCE) += soundwire-cadence.o
#Intel driver
-soundwire-intel-objs := intel.o intel_init.o
+soundwire-intel-y := intel.o intel_init.o
obj-$(CONFIG_SOUNDWIRE_INTEL) += soundwire-intel.o
#Qualcomm driver
-soundwire-qcom-objs := qcom.o
+soundwire-qcom-y := qcom.o
obj-$(CONFIG_SOUNDWIRE_QCOM) += soundwire-qcom.o
diff --git a/drivers/soundwire/bus.c b/drivers/soundwire/bus.c
index 24ba77226376..e6e0fb9a81b4 100644
--- a/drivers/soundwire/bus.c
+++ b/drivers/soundwire/bus.c
@@ -863,13 +863,13 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
if (!slave->dev_num)
continue;
- /* Identify if Slave(s) are available on Bus */
- is_slave = true;
-
if (slave->status != SDW_SLAVE_ATTACHED &&
slave->status != SDW_SLAVE_ALERT)
continue;
+ /* Identify if Slave(s) are available on Bus */
+ is_slave = true;
+
slave_mode = sdw_get_clk_stop_mode(slave);
slave->curr_clk_stop_mode = slave_mode;
@@ -900,6 +900,10 @@ int sdw_bus_prep_clk_stop(struct sdw_bus *bus)
return ret;
}
+ /* Don't need to inform slaves if there is no slave attached */
+ if (!is_slave)
+ return ret;
+
/* Inform slaves that prep is done */
list_for_each_entry(slave, &bus->slaves, node) {
if (!slave->dev_num)
@@ -985,13 +989,13 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
if (!slave->dev_num)
continue;
- /* Identify if Slave(s) are available on Bus */
- is_slave = true;
-
if (slave->status != SDW_SLAVE_ATTACHED &&
slave->status != SDW_SLAVE_ALERT)
continue;
+ /* Identify if Slave(s) are available on Bus */
+ is_slave = true;
+
mode = slave->curr_clk_stop_mode;
if (mode == SDW_CLK_STOP_MODE1) {
@@ -1016,6 +1020,13 @@ int sdw_bus_exit_clk_stop(struct sdw_bus *bus)
if (is_slave && !simple_clk_stop)
sdw_bus_wait_for_clk_prep_deprep(bus, SDW_BROADCAST_DEV_NUM);
+ /*
+ * Don't need to call slave callback function if there is no slave
+ * attached
+ */
+ if (!is_slave)
+ return 0;
+
list_for_each_entry(slave, &bus->slaves, node) {
if (!slave->dev_num)
continue;
@@ -1059,12 +1070,119 @@ int sdw_configure_dpn_intr(struct sdw_slave *slave,
return ret;
}
+static int sdw_slave_set_frequency(struct sdw_slave *slave)
+{
+ u32 mclk_freq = slave->bus->prop.mclk_freq;
+ u32 curr_freq = slave->bus->params.curr_dr_freq >> 1;
+ unsigned int scale;
+ u8 scale_index;
+ u8 base;
+ int ret;
+
+ /*
+ * frequency base and scale registers are required for SDCA
+ * devices. They may also be used for 1.2+/non-SDCA devices,
+ * but we will need a DisCo property to cover this case
+ */
+ if (!slave->id.class_id)
+ return 0;
+
+ if (!mclk_freq) {
+ dev_err(&slave->dev,
+ "no bus MCLK, cannot set SDW_SCP_BUS_CLOCK_BASE\n");
+ return -EINVAL;
+ }
+
+ /*
+ * map base frequency using Table 89 of SoundWire 1.2 spec.
+ * The order of the tests just follows the specification, this
+ * is not a selection between possible values or a search for
+ * the best value but just a mapping. Only one case per platform
+ * is relevant.
+ * Some BIOS have inconsistent values for mclk_freq but a
+ * correct root so we force the mclk_freq to avoid variations.
+ */
+ if (!(19200000 % mclk_freq)) {
+ mclk_freq = 19200000;
+ base = SDW_SCP_BASE_CLOCK_19200000_HZ;
+ } else if (!(24000000 % mclk_freq)) {
+ mclk_freq = 24000000;
+ base = SDW_SCP_BASE_CLOCK_24000000_HZ;
+ } else if (!(24576000 % mclk_freq)) {
+ mclk_freq = 24576000;
+ base = SDW_SCP_BASE_CLOCK_24576000_HZ;
+ } else if (!(22579200 % mclk_freq)) {
+ mclk_freq = 22579200;
+ base = SDW_SCP_BASE_CLOCK_22579200_HZ;
+ } else if (!(32000000 % mclk_freq)) {
+ mclk_freq = 32000000;
+ base = SDW_SCP_BASE_CLOCK_32000000_HZ;
+ } else {
+ dev_err(&slave->dev,
+ "Unsupported clock base, mclk %d\n",
+ mclk_freq);
+ return -EINVAL;
+ }
+
+ if (mclk_freq % curr_freq) {
+ dev_err(&slave->dev,
+ "mclk %d is not multiple of bus curr_freq %d\n",
+ mclk_freq, curr_freq);
+ return -EINVAL;
+ }
+
+ scale = mclk_freq / curr_freq;
+
+ /*
+ * map scale to Table 90 of SoundWire 1.2 spec - and check
+ * that the scale is a power of two and maximum 64
+ */
+ scale_index = ilog2(scale);
+
+ if (BIT(scale_index) != scale || scale_index > 6) {
+ dev_err(&slave->dev,
+ "No match found for scale %d, bus mclk %d curr_freq %d\n",
+ scale, mclk_freq, curr_freq);
+ return -EINVAL;
+ }
+ scale_index++;
+
+ ret = sdw_write(slave, SDW_SCP_BUS_CLOCK_BASE, base);
+ if (ret < 0) {
+ dev_err(&slave->dev,
+ "SDW_SCP_BUS_CLOCK_BASE write failed:%d\n", ret);
+ return ret;
+ }
+
+ /* initialize scale for both banks */
+ ret = sdw_write(slave, SDW_SCP_BUSCLOCK_SCALE_B0, scale_index);
+ if (ret < 0) {
+ dev_err(&slave->dev,
+ "SDW_SCP_BUSCLOCK_SCALE_B0 write failed:%d\n", ret);
+ return ret;
+ }
+ ret = sdw_write(slave, SDW_SCP_BUSCLOCK_SCALE_B1, scale_index);
+ if (ret < 0)
+ dev_err(&slave->dev,
+ "SDW_SCP_BUSCLOCK_SCALE_B1 write failed:%d\n", ret);
+
+ dev_dbg(&slave->dev,
+ "Configured bus base %d, scale %d, mclk %d, curr_freq %d\n",
+ base, scale_index, mclk_freq, curr_freq);
+
+ return ret;
+}
+
static int sdw_initialize_slave(struct sdw_slave *slave)
{
struct sdw_slave_prop *prop = &slave->prop;
int ret;
u8 val;
+ ret = sdw_slave_set_frequency(slave);
+ if (ret < 0)
+ return ret;
+
/*
* Set bus clash, parity and SCP implementation
* defined interrupt mask
diff --git a/drivers/soundwire/bus_type.c b/drivers/soundwire/bus_type.c
index de9a671802b8..6fba55898cf0 100644
--- a/drivers/soundwire/bus_type.c
+++ b/drivers/soundwire/bus_type.c
@@ -20,14 +20,16 @@
static const struct sdw_device_id *
sdw_get_device_id(struct sdw_slave *slave, struct sdw_driver *drv)
{
- const struct sdw_device_id *id = drv->id_table;
+ const struct sdw_device_id *id;
- while (id && id->mfg_id) {
+ for (id = drv->id_table; id && id->mfg_id; id++)
if (slave->id.mfg_id == id->mfg_id &&
- slave->id.part_id == id->part_id)
+ slave->id.part_id == id->part_id &&
+ (!id->sdw_version ||
+ slave->id.sdw_version == id->sdw_version) &&
+ (!id->class_id ||
+ slave->id.class_id == id->class_id))
return id;
- id++;
- }
return NULL;
}
@@ -49,10 +51,11 @@ static int sdw_bus_match(struct device *dev, struct device_driver *ddrv)
int sdw_slave_modalias(const struct sdw_slave *slave, char *buf, size_t size)
{
- /* modalias is sdw:m<mfg_id>p<part_id> */
+ /* modalias is sdw:m<mfg_id>p<part_id>v<version>c<class_id> */
- return snprintf(buf, size, "sdw:m%04Xp%04X\n",
- slave->id.mfg_id, slave->id.part_id);
+ return snprintf(buf, size, "sdw:m%04Xp%04Xv%02Xc%02X\n",
+ slave->id.mfg_id, slave->id.part_id,
+ slave->id.sdw_version, slave->id.class_id);
}
int sdw_slave_uevent(struct device *dev, struct kobj_uevent_env *env)
diff --git a/drivers/soundwire/cadence_master.c b/drivers/soundwire/cadence_master.c
index 9ea87538b9ef..24eafe0aa1c3 100644
--- a/drivers/soundwire/cadence_master.c
+++ b/drivers/soundwire/cadence_master.c
@@ -17,6 +17,7 @@
#include <linux/soundwire/sdw.h>
#include <sound/pcm_params.h>
#include <sound/soc.h>
+#include <linux/workqueue.h>
#include "bus.h"
#include "cadence_master.h"
@@ -790,7 +791,7 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id)
CDNS_MCP_INT_SLAVE_MASK, 0);
int_status &= ~CDNS_MCP_INT_SLAVE_MASK;
- ret = IRQ_WAKE_THREAD;
+ schedule_work(&cdns->work);
}
cdns_writel(cdns, CDNS_MCP_INTSTAT, int_status);
@@ -799,13 +800,15 @@ irqreturn_t sdw_cdns_irq(int irq, void *dev_id)
EXPORT_SYMBOL(sdw_cdns_irq);
/**
- * sdw_cdns_thread() - Cadence irq thread handler
- * @irq: irq number
- * @dev_id: irq context
+ * To update slave status in a work since we will need to handle
+ * other interrupts eg. CDNS_MCP_INT_RX_WL during the update slave
+ * process.
+ * @work: cdns worker thread
*/
-irqreturn_t sdw_cdns_thread(int irq, void *dev_id)
+static void cdns_update_slave_status_work(struct work_struct *work)
{
- struct sdw_cdns *cdns = dev_id;
+ struct sdw_cdns *cdns =
+ container_of(work, struct sdw_cdns, work);
u32 slave0, slave1;
dev_dbg_ratelimited(cdns->dev, "Slave status change\n");
@@ -822,9 +825,7 @@ irqreturn_t sdw_cdns_thread(int irq, void *dev_id)
cdns_updatel(cdns, CDNS_MCP_INTMASK,
CDNS_MCP_INT_SLAVE_MASK, CDNS_MCP_INT_SLAVE_MASK);
- return IRQ_HANDLED;
}
-EXPORT_SYMBOL(sdw_cdns_thread);
/*
* init routines
@@ -1427,6 +1428,7 @@ int sdw_cdns_probe(struct sdw_cdns *cdns)
init_completion(&cdns->tx_complete);
cdns->bus.port_ops = &cdns_port_ops;
+ INIT_WORK(&cdns->work, cdns_update_slave_status_work);
return 0;
}
EXPORT_SYMBOL(sdw_cdns_probe);
@@ -1437,25 +1439,49 @@ int cdns_set_sdw_stream(struct snd_soc_dai *dai,
struct sdw_cdns *cdns = snd_soc_dai_get_drvdata(dai);
struct sdw_cdns_dma_data *dma;
- dma = kzalloc(sizeof(*dma), GFP_KERNEL);
- if (!dma)
- return -ENOMEM;
+ if (stream) {
+ /* first paranoia check */
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+ dma = dai->playback_dma_data;
+ else
+ dma = dai->capture_dma_data;
+
+ if (dma) {
+ dev_err(dai->dev,
+ "dma_data already allocated for dai %s\n",
+ dai->name);
+ return -EINVAL;
+ }
- if (pcm)
- dma->stream_type = SDW_STREAM_PCM;
- else
- dma->stream_type = SDW_STREAM_PDM;
+ /* allocate and set dma info */
+ dma = kzalloc(sizeof(*dma), GFP_KERNEL);
+ if (!dma)
+ return -ENOMEM;
- dma->bus = &cdns->bus;
- dma->link_id = cdns->instance;
+ if (pcm)
+ dma->stream_type = SDW_STREAM_PCM;
+ else
+ dma->stream_type = SDW_STREAM_PDM;
- dma->stream = stream;
+ dma->bus = &cdns->bus;
+ dma->link_id = cdns->instance;
- if (direction == SNDRV_PCM_STREAM_PLAYBACK)
- dai->playback_dma_data = dma;
- else
- dai->capture_dma_data = dma;
+ dma->stream = stream;
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+ dai->playback_dma_data = dma;
+ else
+ dai->capture_dma_data = dma;
+ } else {
+ /* for NULL stream we release allocated dma_data */
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK) {
+ kfree(dai->playback_dma_data);
+ dai->playback_dma_data = NULL;
+ } else {
+ kfree(dai->capture_dma_data);
+ dai->capture_dma_data = NULL;
+ }
+ }
return 0;
}
EXPORT_SYMBOL(cdns_set_sdw_stream);
diff --git a/drivers/soundwire/cadence_master.h b/drivers/soundwire/cadence_master.h
index b410656f8194..7638858397df 100644
--- a/drivers/soundwire/cadence_master.h
+++ b/drivers/soundwire/cadence_master.h
@@ -129,6 +129,10 @@ struct sdw_cdns {
bool link_up;
unsigned int msg_count;
+
+ struct work_struct work;
+
+ struct list_head list;
};
#define bus_to_cdns(_bus) container_of(_bus, struct sdw_cdns, bus)
diff --git a/drivers/soundwire/intel.c b/drivers/soundwire/intel.c
index c7422740edd4..a283670659a9 100644
--- a/drivers/soundwire/intel.c
+++ b/drivers/soundwire/intel.c
@@ -13,6 +13,7 @@
#include <linux/io.h>
#include <linux/platform_device.h>
#include <sound/pcm_params.h>
+#include <linux/pm_runtime.h>
#include <sound/soc.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
@@ -46,7 +47,8 @@
#define SDW_SHIM_LCTL_SPA BIT(0)
#define SDW_SHIM_LCTL_CPA BIT(8)
-#define SDW_SHIM_SYNC_SYNCPRD_VAL 0x176F
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_24 (24000 / SDW_CADENCE_GSYNC_KHZ - 1)
+#define SDW_SHIM_SYNC_SYNCPRD_VAL_38_4 (38400 / SDW_CADENCE_GSYNC_KHZ - 1)
#define SDW_SHIM_SYNC_SYNCPRD GENMASK(14, 0)
#define SDW_SHIM_SYNC_SYNCCPU BIT(15)
#define SDW_SHIM_SYNC_CMDSYNC_MASK GENMASK(19, 16)
@@ -92,23 +94,12 @@
#define SDW_ALH_STRMZCFG_DMAT GENMASK(7, 0)
#define SDW_ALH_STRMZCFG_CHN GENMASK(19, 16)
-#define SDW_INTEL_QUIRK_MASK_BUS_DISABLE BIT(1)
-
enum intel_pdi_type {
INTEL_PDI_IN = 0,
INTEL_PDI_OUT = 1,
INTEL_PDI_BD = 2,
};
-struct sdw_intel {
- struct sdw_cdns cdns;
- int instance;
- struct sdw_intel_link_res *link_res;
-#ifdef CONFIG_DEBUG_FS
- struct dentry *debugfs;
-#endif
-};
-
#define cdns_to_intel(_cdns) container_of(_cdns, struct sdw_intel, cdns)
/*
@@ -134,40 +125,33 @@ static inline void intel_writew(void __iomem *base, int offset, u16 value)
writew(value, base + offset);
}
-static int intel_clear_bit(void __iomem *base, int offset, u32 value, u32 mask)
+static int intel_wait_bit(void __iomem *base, int offset, u32 mask, u32 target)
{
int timeout = 10;
u32 reg_read;
- writel(value, base + offset);
do {
reg_read = readl(base + offset);
- if (!(reg_read & mask))
+ if ((reg_read & mask) == target)
return 0;
timeout--;
- udelay(50);
+ usleep_range(50, 100);
} while (timeout != 0);
return -EAGAIN;
}
-static int intel_set_bit(void __iomem *base, int offset, u32 value, u32 mask)
+static int intel_clear_bit(void __iomem *base, int offset, u32 value, u32 mask)
{
- int timeout = 10;
- u32 reg_read;
-
writel(value, base + offset);
- do {
- reg_read = readl(base + offset);
- if (reg_read & mask)
- return 0;
-
- timeout--;
- udelay(50);
- } while (timeout != 0);
+ return intel_wait_bit(base, offset, mask, 0);
+}
- return -EAGAIN;
+static int intel_set_bit(void __iomem *base, int offset, u32 value, u32 mask)
+{
+ writel(value, base + offset);
+ return intel_wait_bit(base, offset, mask, mask);
}
/*
@@ -290,8 +274,46 @@ static int intel_link_power_up(struct sdw_intel *sdw)
{
unsigned int link_id = sdw->instance;
void __iomem *shim = sdw->link_res->shim;
+ u32 *shim_mask = sdw->link_res->shim_mask;
+ struct sdw_bus *bus = &sdw->cdns.bus;
+ struct sdw_master_prop *prop = &bus->prop;
int spa_mask, cpa_mask;
- int link_control, ret;
+ int link_control;
+ int ret = 0;
+ u32 syncprd;
+ u32 sync_reg;
+
+ mutex_lock(sdw->link_res->shim_lock);
+
+ /*
+ * The hardware relies on an internal counter, typically 4kHz,
+ * to generate the SoundWire SSP - which defines a 'safe'
+ * synchronization point between commands and audio transport
+ * and allows for multi link synchronization. The SYNCPRD value
+ * is only dependent on the oscillator clock provided to
+ * the IP, so adjust based on _DSD properties reported in DSDT
+ * tables. The values reported are based on either 24MHz
+ * (CNL/CML) or 38.4 MHz (ICL/TGL+).
+ */
+ if (prop->mclk_freq % 6000000)
+ syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_38_4;
+ else
+ syncprd = SDW_SHIM_SYNC_SYNCPRD_VAL_24;
+
+ if (!*shim_mask) {
+ /* we first need to program the SyncPRD/CPU registers */
+ dev_dbg(sdw->cdns.dev,
+ "%s: first link up, programming SYNCPRD\n", __func__);
+
+ /* set SyncPRD period */
+ sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
+ sync_reg |= (syncprd <<
+ SDW_REG_SHIFT(SDW_SHIM_SYNC_SYNCPRD));
+
+ /* Set SyncCPU bit */
+ sync_reg |= SDW_SHIM_SYNC_SYNCCPU;
+ intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
+ }
/* Link power up sequence */
link_control = intel_readl(shim, SDW_SHIM_LCTL);
@@ -300,66 +322,218 @@ static int intel_link_power_up(struct sdw_intel *sdw)
link_control |= spa_mask;
ret = intel_set_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
- if (ret < 0)
- return ret;
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev, "Failed to power up link: %d\n", ret);
+ goto out;
+ }
+
+ if (!*shim_mask) {
+ /* SyncCPU will change once link is active */
+ ret = intel_wait_bit(shim, SDW_SHIM_SYNC,
+ SDW_SHIM_SYNC_SYNCCPU, 0);
+ if (ret < 0) {
+ dev_err(sdw->cdns.dev,
+ "Failed to set SHIM_SYNC: %d\n", ret);
+ goto out;
+ }
+ }
+
+ *shim_mask |= BIT(link_id);
sdw->cdns.link_up = true;
- return 0;
+out:
+ mutex_unlock(sdw->link_res->shim_lock);
+
+ return ret;
}
-static int intel_shim_init(struct sdw_intel *sdw)
+/* this needs to be called with shim_lock */
+static void intel_shim_glue_to_master_ip(struct sdw_intel *sdw)
{
void __iomem *shim = sdw->link_res->shim;
unsigned int link_id = sdw->instance;
- int sync_reg, ret;
- u16 ioctl = 0, act = 0;
+ u16 ioctl;
- /* Initialize Shim */
- ioctl |= SDW_SHIM_IOCTL_BKE;
+ /* Switch to MIP from Glue logic */
+ ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id));
+
+ ioctl &= ~(SDW_SHIM_IOCTL_DOE);
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl |= SDW_SHIM_IOCTL_WPDD;
+ ioctl &= ~(SDW_SHIM_IOCTL_DO);
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl |= SDW_SHIM_IOCTL_DO;
+ ioctl |= (SDW_SHIM_IOCTL_MIF);
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl |= SDW_SHIM_IOCTL_DOE;
+ ioctl &= ~(SDW_SHIM_IOCTL_BKE);
+ ioctl &= ~(SDW_SHIM_IOCTL_COE);
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- /* Switch to MIP from Glue logic */
- ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id));
+ /* at this point Master IP has full control of the I/Os */
+}
- ioctl &= ~(SDW_SHIM_IOCTL_DOE);
+/* this needs to be called with shim_lock */
+static void intel_shim_master_ip_to_glue(struct sdw_intel *sdw)
+{
+ unsigned int link_id = sdw->instance;
+ void __iomem *shim = sdw->link_res->shim;
+ u16 ioctl;
+
+ /* Glue logic */
+ ioctl = intel_readw(shim, SDW_SHIM_IOCTL(link_id));
+ ioctl |= SDW_SHIM_IOCTL_BKE;
+ ioctl |= SDW_SHIM_IOCTL_COE;
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl &= ~(SDW_SHIM_IOCTL_DO);
+ ioctl &= ~(SDW_SHIM_IOCTL_MIF);
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl |= (SDW_SHIM_IOCTL_MIF);
+ /* at this point Integration Glue has full control of the I/Os */
+}
+
+static int intel_shim_init(struct sdw_intel *sdw, bool clock_stop)
+{
+ void __iomem *shim = sdw->link_res->shim;
+ unsigned int link_id = sdw->instance;
+ int ret = 0;
+ u16 ioctl = 0, act = 0;
+
+ mutex_lock(sdw->link_res->shim_lock);
+
+ /* Initialize Shim */
+ ioctl |= SDW_SHIM_IOCTL_BKE;
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
- ioctl &= ~(SDW_SHIM_IOCTL_BKE);
- ioctl &= ~(SDW_SHIM_IOCTL_COE);
+ ioctl |= SDW_SHIM_IOCTL_WPDD;
+ intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
+ ioctl |= SDW_SHIM_IOCTL_DO;
intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
+
+ ioctl |= SDW_SHIM_IOCTL_DOE;
+ intel_writew(shim, SDW_SHIM_IOCTL(link_id), ioctl);
+ usleep_range(10, 15);
+
+ intel_shim_glue_to_master_ip(sdw);
act |= 0x1 << SDW_REG_SHIFT(SDW_SHIM_CTMCTL_DOAIS);
act |= SDW_SHIM_CTMCTL_DACTQE;
act |= SDW_SHIM_CTMCTL_DODS;
intel_writew(shim, SDW_SHIM_CTMCTL(link_id), act);
+ usleep_range(10, 15);
+
+ mutex_unlock(sdw->link_res->shim_lock);
+
+ return ret;
+}
+
+static void intel_shim_wake(struct sdw_intel *sdw, bool wake_enable)
+{
+ void __iomem *shim = sdw->link_res->shim;
+ unsigned int link_id = sdw->instance;
+ u16 wake_en, wake_sts;
+
+ mutex_lock(sdw->link_res->shim_lock);
+ wake_en = intel_readw(shim, SDW_SHIM_WAKEEN);
+
+ if (wake_enable) {
+ /* Enable the wakeup */
+ wake_en |= (SDW_SHIM_WAKEEN_ENABLE << link_id);
+ intel_writew(shim, SDW_SHIM_WAKEEN, wake_en);
+ } else {
+ /* Disable the wake up interrupt */
+ wake_en &= ~(SDW_SHIM_WAKEEN_ENABLE << link_id);
+ intel_writew(shim, SDW_SHIM_WAKEEN, wake_en);
+
+ /* Clear wake status */
+ wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
+ wake_sts |= (SDW_SHIM_WAKEEN_ENABLE << link_id);
+ intel_writew(shim, SDW_SHIM_WAKESTS_STATUS, wake_sts);
+ }
+ mutex_unlock(sdw->link_res->shim_lock);
+}
+
+static int __maybe_unused intel_link_power_down(struct sdw_intel *sdw)
+{
+ int link_control, spa_mask, cpa_mask;
+ unsigned int link_id = sdw->instance;
+ void __iomem *shim = sdw->link_res->shim;
+ u32 *shim_mask = sdw->link_res->shim_mask;
+ int ret = 0;
+
+ mutex_lock(sdw->link_res->shim_lock);
+
+ intel_shim_master_ip_to_glue(sdw);
+
+ /* Link power down sequence */
+ link_control = intel_readl(shim, SDW_SHIM_LCTL);
+ spa_mask = ~(SDW_SHIM_LCTL_SPA << link_id);
+ cpa_mask = (SDW_SHIM_LCTL_CPA << link_id);
+ link_control &= spa_mask;
+
+ ret = intel_clear_bit(shim, SDW_SHIM_LCTL, link_control, cpa_mask);
+
+ if (!(*shim_mask & BIT(link_id)))
+ dev_err(sdw->cdns.dev,
+ "%s: Unbalanced power-up/down calls\n", __func__);
+
+ *shim_mask &= ~BIT(link_id);
+
+ mutex_unlock(sdw->link_res->shim_lock);
+
+ if (ret < 0)
+ return ret;
+
+ sdw->cdns.link_up = false;
+ return 0;
+}
+
+static void intel_shim_sync_arm(struct sdw_intel *sdw)
+{
+ void __iomem *shim = sdw->link_res->shim;
+ u32 sync_reg;
+
+ mutex_lock(sdw->link_res->shim_lock);
+
+ /* update SYNC register */
+ sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
+ sync_reg |= (SDW_SHIM_SYNC_CMDSYNC << sdw->instance);
+ intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
+
+ mutex_unlock(sdw->link_res->shim_lock);
+}
+
+static int intel_shim_sync_go_unlocked(struct sdw_intel *sdw)
+{
+ void __iomem *shim = sdw->link_res->shim;
+ u32 sync_reg;
+ int ret;
- /* Now set SyncPRD period */
+ /* Read SYNC register */
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
- sync_reg |= (SDW_SHIM_SYNC_SYNCPRD_VAL <<
- SDW_REG_SHIFT(SDW_SHIM_SYNC_SYNCPRD));
- /* Set SyncCPU bit */
- sync_reg |= SDW_SHIM_SYNC_SYNCCPU;
+ /*
+ * Set SyncGO bit to synchronously trigger a bank switch for
+ * all the masters. A write to SYNCGO bit clears CMDSYNC bit for all
+ * the Masters.
+ */
+ sync_reg |= SDW_SHIM_SYNC_SYNCGO;
+
ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg,
- SDW_SHIM_SYNC_SYNCCPU);
+ SDW_SHIM_SYNC_SYNCGO);
+
if (ret < 0)
- dev_err(sdw->cdns.dev, "Failed to set sync period: %d\n", ret);
+ dev_err(sdw->cdns.dev, "SyncGO clear failed: %d\n", ret);
return ret;
}
@@ -577,17 +751,12 @@ static int intel_pre_bank_switch(struct sdw_bus *bus)
{
struct sdw_cdns *cdns = bus_to_cdns(bus);
struct sdw_intel *sdw = cdns_to_intel(cdns);
- void __iomem *shim = sdw->link_res->shim;
- int sync_reg;
/* Write to register only for multi-link */
if (!bus->multi_link)
return 0;
- /* Read SYNC register */
- sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
- sync_reg |= SDW_SHIM_SYNC_CMDSYNC << sdw->instance;
- intel_writel(shim, SDW_SHIM_SYNC, sync_reg);
+ intel_shim_sync_arm(sdw);
return 0;
}
@@ -603,6 +772,8 @@ static int intel_post_bank_switch(struct sdw_bus *bus)
if (!bus->multi_link)
return 0;
+ mutex_lock(sdw->link_res->shim_lock);
+
/* Read SYNC register */
sync_reg = intel_readl(shim, SDW_SHIM_SYNC);
@@ -614,18 +785,15 @@ static int intel_post_bank_switch(struct sdw_bus *bus)
*
* So, set the SYNCGO bit only if CMDSYNC bit is set for any Master.
*/
- if (!(sync_reg & SDW_SHIM_SYNC_CMDSYNC_MASK))
- return 0;
+ if (!(sync_reg & SDW_SHIM_SYNC_CMDSYNC_MASK)) {
+ ret = 0;
+ goto unlock;
+ }
- /*
- * Set SyncGO bit to synchronously trigger a bank switch for
- * all the masters. A write to SYNCGO bit clears CMDSYNC bit for all
- * the Masters.
- */
- sync_reg |= SDW_SHIM_SYNC_SYNCGO;
+ ret = intel_shim_sync_go_unlocked(sdw);
+unlock:
+ mutex_unlock(sdw->link_res->shim_lock);
- ret = intel_clear_bit(shim, SDW_SHIM_SYNC, sync_reg,
- SDW_SHIM_SYNC_SYNCGO);
if (ret < 0)
dev_err(sdw->cdns.dev, "Post bank switch failed: %d\n", ret);
@@ -636,57 +804,6 @@ static int intel_post_bank_switch(struct sdw_bus *bus)
* DAI routines
*/
-static int sdw_stream_setup(struct snd_pcm_substream *substream,
- struct snd_soc_dai *dai)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct sdw_stream_runtime *sdw_stream = NULL;
- char *name;
- int i, ret;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- name = kasprintf(GFP_KERNEL, "%s-Playback", dai->name);
- else
- name = kasprintf(GFP_KERNEL, "%s-Capture", dai->name);
-
- if (!name)
- return -ENOMEM;
-
- sdw_stream = sdw_alloc_stream(name);
- if (!sdw_stream) {
- dev_err(dai->dev, "alloc stream failed for DAI %s", dai->name);
- ret = -ENOMEM;
- goto error;
- }
-
- /* Set stream pointer on CPU DAI */
- ret = snd_soc_dai_set_sdw_stream(dai, sdw_stream, substream->stream);
- if (ret < 0) {
- dev_err(dai->dev, "failed to set stream pointer on cpu dai %s",
- dai->name);
- goto release_stream;
- }
-
- /* Set stream pointer on all CODEC DAIs */
- for (i = 0; i < rtd->num_codecs; i++) {
- ret = snd_soc_dai_set_sdw_stream(asoc_rtd_to_codec(rtd, i), sdw_stream,
- substream->stream);
- if (ret < 0) {
- dev_err(dai->dev, "failed to set stream pointer on codec dai %s",
- asoc_rtd_to_codec(rtd, i)->name);
- goto release_stream;
- }
- }
-
- return 0;
-
-release_stream:
- sdw_release_stream(sdw_stream);
-error:
- kfree(name);
- return ret;
-}
-
static int intel_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@@ -694,8 +811,7 @@ static int intel_startup(struct snd_pcm_substream *substream,
* TODO: add pm_runtime support here, the startup callback
* will make sure the IP is 'active'
*/
-
- return sdw_stream_setup(substream, dai);
+ return 0;
}
static int intel_hw_params(struct snd_pcm_substream *substream,
@@ -863,23 +979,13 @@ intel_hw_free(struct snd_pcm_substream *substream, struct snd_soc_dai *dai)
return ret;
}
- kfree(dma->stream->name);
- sdw_release_stream(dma->stream);
-
return 0;
}
static void intel_shutdown(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
- struct sdw_cdns_dma_data *dma;
- dma = snd_soc_dai_get_dma_data(dai, substream);
- if (!dma)
- return;
-
- snd_soc_dai_set_dma_data(dai, substream, NULL);
- kfree(dma);
}
static int intel_pcm_set_sdw_stream(struct snd_soc_dai *dai,
@@ -894,6 +1000,22 @@ static int intel_pdm_set_sdw_stream(struct snd_soc_dai *dai,
return cdns_set_sdw_stream(dai, stream, false, direction);
}
+static void *intel_get_sdw_stream(struct snd_soc_dai *dai,
+ int direction)
+{
+ struct sdw_cdns_dma_data *dma;
+
+ if (direction == SNDRV_PCM_STREAM_PLAYBACK)
+ dma = dai->playback_dma_data;
+ else
+ dma = dai->capture_dma_data;
+
+ if (!dma)
+ return NULL;
+
+ return dma->stream;
+}
+
static const struct snd_soc_dai_ops intel_pcm_dai_ops = {
.startup = intel_startup,
.hw_params = intel_hw_params,
@@ -902,6 +1024,7 @@ static const struct snd_soc_dai_ops intel_pcm_dai_ops = {
.hw_free = intel_hw_free,
.shutdown = intel_shutdown,
.set_sdw_stream = intel_pcm_set_sdw_stream,
+ .get_sdw_stream = intel_get_sdw_stream,
};
static const struct snd_soc_dai_ops intel_pdm_dai_ops = {
@@ -912,6 +1035,7 @@ static const struct snd_soc_dai_ops intel_pdm_dai_ops = {
.hw_free = intel_hw_free,
.shutdown = intel_shutdown,
.set_sdw_stream = intel_pdm_set_sdw_stream,
+ .get_sdw_stream = intel_get_sdw_stream,
};
static const struct snd_soc_component_driver dai_component = {
@@ -1074,9 +1198,17 @@ static struct sdw_master_ops sdw_intel_ops = {
static int intel_init(struct sdw_intel *sdw)
{
+ bool clock_stop;
+
/* Initialize shim and controller */
intel_link_power_up(sdw);
- intel_shim_init(sdw);
+
+ clock_stop = sdw_cdns_is_clock_stop(&sdw->cdns);
+
+ intel_shim_init(sdw, clock_stop);
+
+ if (clock_stop)
+ return 0;
return sdw_cdns_init(&sdw->cdns);
}
@@ -1084,41 +1216,66 @@ static int intel_init(struct sdw_intel *sdw)
/*
* probe and init
*/
-static int intel_probe(struct platform_device *pdev)
+static int intel_master_probe(struct platform_device *pdev)
{
- struct sdw_cdns_stream_config config;
+ struct device *dev = &pdev->dev;
struct sdw_intel *sdw;
+ struct sdw_cdns *cdns;
+ struct sdw_bus *bus;
int ret;
- sdw = devm_kzalloc(&pdev->dev, sizeof(*sdw), GFP_KERNEL);
+ sdw = devm_kzalloc(dev, sizeof(*sdw), GFP_KERNEL);
if (!sdw)
return -ENOMEM;
+ cdns = &sdw->cdns;
+ bus = &cdns->bus;
+
sdw->instance = pdev->id;
- sdw->link_res = dev_get_platdata(&pdev->dev);
- sdw->cdns.dev = &pdev->dev;
- sdw->cdns.registers = sdw->link_res->registers;
- sdw->cdns.instance = sdw->instance;
- sdw->cdns.msg_count = 0;
- sdw->cdns.bus.link_id = pdev->id;
+ sdw->link_res = dev_get_platdata(dev);
+ cdns->dev = dev;
+ cdns->registers = sdw->link_res->registers;
+ cdns->instance = sdw->instance;
+ cdns->msg_count = 0;
+
+ bus->link_id = pdev->id;
- sdw_cdns_probe(&sdw->cdns);
+ sdw_cdns_probe(cdns);
/* Set property read ops */
sdw_intel_ops.read_prop = intel_prop_read;
- sdw->cdns.bus.ops = &sdw_intel_ops;
+ bus->ops = &sdw_intel_ops;
- platform_set_drvdata(pdev, sdw);
+ /* set driver data, accessed by snd_soc_dai_get_drvdata() */
+ dev_set_drvdata(dev, cdns);
- ret = sdw_bus_master_add(&sdw->cdns.bus, &pdev->dev, pdev->dev.fwnode);
+ ret = sdw_bus_master_add(bus, dev, dev->fwnode);
if (ret) {
- dev_err(&pdev->dev, "sdw_bus_master_add fail: %d\n", ret);
+ dev_err(dev, "sdw_bus_master_add fail: %d\n", ret);
return ret;
}
- if (sdw->cdns.bus.prop.hw_disabled) {
- dev_info(&pdev->dev, "SoundWire master %d is disabled, ignoring\n",
- sdw->cdns.bus.link_id);
+ if (bus->prop.hw_disabled)
+ dev_info(dev,
+ "SoundWire master %d is disabled, will be ignored\n",
+ bus->link_id);
+
+ return 0;
+}
+
+int intel_master_startup(struct platform_device *pdev)
+{
+ struct sdw_cdns_stream_config config;
+ struct device *dev = &pdev->dev;
+ struct sdw_cdns *cdns = dev_get_drvdata(dev);
+ struct sdw_intel *sdw = cdns_to_intel(cdns);
+ struct sdw_bus *bus = &cdns->bus;
+ int ret;
+
+ if (bus->prop.hw_disabled) {
+ dev_info(dev,
+ "SoundWire master %d is disabled, ignoring\n",
+ sdw->instance);
return 0;
}
@@ -1129,39 +1286,29 @@ static int intel_probe(struct platform_device *pdev)
/* Read the PDI config and initialize cadence PDI */
intel_pdi_init(sdw, &config);
- ret = sdw_cdns_pdi_init(&sdw->cdns, config);
+ ret = sdw_cdns_pdi_init(cdns, config);
if (ret)
goto err_init;
intel_pdi_ch_update(sdw);
- /* Acquire IRQ */
- ret = request_threaded_irq(sdw->link_res->irq,
- sdw_cdns_irq, sdw_cdns_thread,
- IRQF_SHARED, KBUILD_MODNAME, &sdw->cdns);
+ ret = sdw_cdns_enable_interrupt(cdns, true);
if (ret < 0) {
- dev_err(sdw->cdns.dev, "unable to grab IRQ %d, disabling device\n",
- sdw->link_res->irq);
+ dev_err(dev, "cannot enable interrupts\n");
goto err_init;
}
- ret = sdw_cdns_enable_interrupt(&sdw->cdns, true);
+ ret = sdw_cdns_exit_reset(cdns);
if (ret < 0) {
- dev_err(sdw->cdns.dev, "cannot enable interrupts\n");
- goto err_init;
- }
-
- ret = sdw_cdns_exit_reset(&sdw->cdns);
- if (ret < 0) {
- dev_err(sdw->cdns.dev, "unable to exit bus reset sequence\n");
+ dev_err(dev, "unable to exit bus reset sequence\n");
goto err_interrupt;
}
/* Register DAIs */
ret = intel_register_dai(sdw);
if (ret) {
- dev_err(sdw->cdns.dev, "DAI registration failed: %d\n", ret);
- snd_soc_unregister_component(sdw->cdns.dev);
+ dev_err(dev, "DAI registration failed: %d\n", ret);
+ snd_soc_unregister_component(dev);
goto err_interrupt;
}
@@ -1170,41 +1317,75 @@ static int intel_probe(struct platform_device *pdev)
return 0;
err_interrupt:
- sdw_cdns_enable_interrupt(&sdw->cdns, false);
- free_irq(sdw->link_res->irq, sdw);
+ sdw_cdns_enable_interrupt(cdns, false);
err_init:
- sdw_bus_master_delete(&sdw->cdns.bus);
return ret;
}
-static int intel_remove(struct platform_device *pdev)
+static int intel_master_remove(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
+ struct sdw_cdns *cdns = dev_get_drvdata(dev);
+ struct sdw_intel *sdw = cdns_to_intel(cdns);
+ struct sdw_bus *bus = &cdns->bus;
+
+ if (!bus->prop.hw_disabled) {
+ intel_debugfs_exit(sdw);
+ sdw_cdns_enable_interrupt(cdns, false);
+ snd_soc_unregister_component(dev);
+ }
+ sdw_bus_master_delete(bus);
+
+ return 0;
+}
+
+int intel_master_process_wakeen_event(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
struct sdw_intel *sdw;
+ struct sdw_bus *bus;
+ void __iomem *shim;
+ u16 wake_sts;
sdw = platform_get_drvdata(pdev);
+ bus = &sdw->cdns.bus;
- if (!sdw->cdns.bus.prop.hw_disabled) {
- intel_debugfs_exit(sdw);
- sdw_cdns_enable_interrupt(&sdw->cdns, false);
- free_irq(sdw->link_res->irq, sdw);
- snd_soc_unregister_component(sdw->cdns.dev);
+ if (bus->prop.hw_disabled) {
+ dev_dbg(dev, "SoundWire master %d is disabled, ignoring\n", bus->link_id);
+ return 0;
}
- sdw_bus_master_delete(&sdw->cdns.bus);
+
+ shim = sdw->link_res->shim;
+ wake_sts = intel_readw(shim, SDW_SHIM_WAKESTS);
+
+ if (!(wake_sts & BIT(sdw->instance)))
+ return 0;
+
+ /* disable WAKEEN interrupt ASAP to prevent interrupt flood */
+ intel_shim_wake(sdw, false);
+
+ /*
+ * resume the Master, which will generate a bus reset and result in
+ * Slaves re-attaching and be re-enumerated. The SoundWire physical
+ * device which generated the wake will trigger an interrupt, which
+ * will in turn cause the corresponding Linux Slave device to be
+ * resumed and the Slave codec driver to check the status.
+ */
+ pm_request_resume(dev);
return 0;
}
static struct platform_driver sdw_intel_drv = {
- .probe = intel_probe,
- .remove = intel_remove,
+ .probe = intel_master_probe,
+ .remove = intel_master_remove,
.driver = {
- .name = "int-sdw",
-
+ .name = "intel-sdw",
},
};
module_platform_driver(sdw_intel_drv);
MODULE_LICENSE("Dual BSD/GPL");
-MODULE_ALIAS("platform:int-sdw");
+MODULE_ALIAS("platform:intel-sdw");
MODULE_DESCRIPTION("Intel Soundwire Master Driver");
diff --git a/drivers/soundwire/intel.h b/drivers/soundwire/intel.h
index 38b7c125fb10..4ea3d262d249 100644
--- a/drivers/soundwire/intel.h
+++ b/drivers/soundwire/intel.h
@@ -15,6 +15,10 @@
* @irq: Interrupt line
* @ops: Shim callback ops
* @dev: device implementing hw_params and free callbacks
+ * @shim_lock: mutex to handle access to shared SHIM registers
+ * @shim_mask: global pointer to check SHIM register initialization
+ * @cdns: Cadence master descriptor
+ * @list: used to walk-through all masters exposed by the same controller
*/
struct sdw_intel_link_res {
struct platform_device *pdev;
@@ -25,6 +29,24 @@ struct sdw_intel_link_res {
int irq;
const struct sdw_intel_ops *ops;
struct device *dev;
+ struct mutex *shim_lock; /* protect shared registers */
+ u32 *shim_mask;
+ struct sdw_cdns *cdns;
+ struct list_head list;
};
+struct sdw_intel {
+ struct sdw_cdns cdns;
+ int instance;
+ struct sdw_intel_link_res *link_res;
+#ifdef CONFIG_DEBUG_FS
+ struct dentry *debugfs;
+#endif
+};
+
+#define SDW_INTEL_QUIRK_MASK_BUS_DISABLE BIT(1)
+
+int intel_master_startup(struct platform_device *pdev);
+int intel_master_process_wakeen_event(struct platform_device *pdev);
+
#endif /* __SDW_INTEL_LOCAL_H */
diff --git a/drivers/soundwire/intel_init.c b/drivers/soundwire/intel_init.c
index d5d42795a48f..047252a91c9e 100644
--- a/drivers/soundwire/intel_init.c
+++ b/drivers/soundwire/intel_init.c
@@ -9,10 +9,12 @@
#include <linux/acpi.h>
#include <linux/export.h>
+#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/soundwire/sdw_intel.h>
+#include "cadence_master.h"
#include "intel.h"
#define SDW_LINK_TYPE 4 /* from Intel ACPI documentation */
@@ -23,138 +25,324 @@
#define SDW_LINK_BASE 0x30000
#define SDW_LINK_SIZE 0x10000
-static int link_mask;
-module_param_named(sdw_link_mask, link_mask, int, 0444);
+static int ctrl_link_mask;
+module_param_named(sdw_link_mask, ctrl_link_mask, int, 0444);
MODULE_PARM_DESC(sdw_link_mask, "Intel link mask (one bit per link)");
-static int sdw_intel_cleanup_pdev(struct sdw_intel_ctx *ctx)
+static bool is_link_enabled(struct fwnode_handle *fw_node, int i)
+{
+ struct fwnode_handle *link;
+ char name[32];
+ u32 quirk_mask = 0;
+
+ /* Find master handle */
+ snprintf(name, sizeof(name),
+ "mipi-sdw-link-%d-subproperties", i);
+
+ link = fwnode_get_named_child_node(fw_node, name);
+ if (!link)
+ return false;
+
+ fwnode_property_read_u32(link,
+ "intel-quirk-mask",
+ &quirk_mask);
+
+ if (quirk_mask & SDW_INTEL_QUIRK_MASK_BUS_DISABLE)
+ return false;
+
+ return true;
+}
+
+static int sdw_intel_cleanup(struct sdw_intel_ctx *ctx)
{
struct sdw_intel_link_res *link = ctx->links;
+ u32 link_mask;
int i;
if (!link)
return 0;
- for (i = 0; i < ctx->count; i++) {
+ link_mask = ctx->link_mask;
+
+ for (i = 0; i < ctx->count; i++, link++) {
+ if (!(link_mask & BIT(i)))
+ continue;
+
if (link->pdev)
platform_device_unregister(link->pdev);
- link++;
}
- kfree(ctx->links);
- ctx->links = NULL;
-
return 0;
}
-static struct sdw_intel_ctx
-*sdw_intel_add_controller(struct sdw_intel_res *res)
+static int
+sdw_intel_scan_controller(struct sdw_intel_acpi_info *info)
{
- struct platform_device_info pdevinfo;
- struct platform_device *pdev;
- struct sdw_intel_link_res *link;
- struct sdw_intel_ctx *ctx;
struct acpi_device *adev;
int ret, i;
u8 count;
- u32 caps;
- if (acpi_bus_get_device(res->handle, &adev))
- return NULL;
+ if (acpi_bus_get_device(info->handle, &adev))
+ return -EINVAL;
/* Found controller, find links supported */
count = 0;
ret = fwnode_property_read_u8_array(acpi_fwnode_handle(adev),
"mipi-sdw-master-count", &count, 1);
- /* Don't fail on error, continue and use hw value */
+ /*
+ * In theory we could check the number of links supported in
+ * hardware, but in that step we cannot assume SoundWire IP is
+ * powered.
+ *
+ * In addition, if the BIOS doesn't even provide this
+ * 'master-count' property then all the inits based on link
+ * masks will fail as well.
+ *
+ * We will check the hardware capabilities in the startup() step
+ */
+
if (ret) {
dev_err(&adev->dev,
"Failed to read mipi-sdw-master-count: %d\n", ret);
- count = SDW_MAX_LINKS;
+ return -EINVAL;
}
- /* Check SNDWLCAP.LCOUNT */
- caps = ioread32(res->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP);
- caps &= GENMASK(2, 0);
-
- /* Check HW supported vs property value and use min of two */
- count = min_t(u8, caps, count);
-
/* Check count is within bounds */
if (count > SDW_MAX_LINKS) {
dev_err(&adev->dev, "Link count %d exceeds max %d\n",
count, SDW_MAX_LINKS);
- return NULL;
+ return -EINVAL;
}
if (!count) {
dev_warn(&adev->dev, "No SoundWire links detected\n");
- return NULL;
+ return -EINVAL;
+ }
+ dev_dbg(&adev->dev, "ACPI reports %d SDW Link devices\n", count);
+
+ info->count = count;
+ info->link_mask = 0;
+
+ for (i = 0; i < count; i++) {
+ if (ctrl_link_mask && !(ctrl_link_mask & BIT(i))) {
+ dev_dbg(&adev->dev,
+ "Link %d masked, will not be enabled\n", i);
+ continue;
+ }
+
+ if (!is_link_enabled(acpi_fwnode_handle(adev), i)) {
+ dev_dbg(&adev->dev,
+ "Link %d not selected in firmware\n", i);
+ continue;
+ }
+
+ info->link_mask |= BIT(i);
}
+ return 0;
+}
+
+#define HDA_DSP_REG_ADSPIC2 (0x10)
+#define HDA_DSP_REG_ADSPIS2 (0x14)
+#define HDA_DSP_REG_ADSPIC2_SNDW BIT(5)
+
+/**
+ * sdw_intel_enable_irq() - enable/disable Intel SoundWire IRQ
+ * @mmio_base: The mmio base of the control register
+ * @enable: true if enable
+ */
+void sdw_intel_enable_irq(void __iomem *mmio_base, bool enable)
+{
+ u32 val;
+
+ val = readl(mmio_base + HDA_DSP_REG_ADSPIC2);
+
+ if (enable)
+ val |= HDA_DSP_REG_ADSPIC2_SNDW;
+ else
+ val &= ~HDA_DSP_REG_ADSPIC2_SNDW;
+
+ writel(val, mmio_base + HDA_DSP_REG_ADSPIC2);
+}
+EXPORT_SYMBOL_NS(sdw_intel_enable_irq, SOUNDWIRE_INTEL_INIT);
+
+irqreturn_t sdw_intel_thread(int irq, void *dev_id)
+{
+ struct sdw_intel_ctx *ctx = dev_id;
+ struct sdw_intel_link_res *link;
+
+ list_for_each_entry(link, &ctx->link_list, list)
+ sdw_cdns_irq(irq, link->cdns);
+
+ sdw_intel_enable_irq(ctx->mmio_base, true);
+ return IRQ_HANDLED;
+}
+EXPORT_SYMBOL_NS(sdw_intel_thread, SOUNDWIRE_INTEL_INIT);
+
+static struct sdw_intel_ctx
+*sdw_intel_probe_controller(struct sdw_intel_res *res)
+{
+ struct platform_device_info pdevinfo;
+ struct platform_device *pdev;
+ struct sdw_intel_link_res *link;
+ struct sdw_intel_ctx *ctx;
+ struct acpi_device *adev;
+ struct sdw_slave *slave;
+ struct list_head *node;
+ struct sdw_bus *bus;
+ u32 link_mask;
+ int num_slaves = 0;
+ int count;
+ int i;
+
+ if (!res)
+ return NULL;
+
+ if (acpi_bus_get_device(res->handle, &adev))
+ return NULL;
+
+ if (!res->count)
+ return NULL;
+
+ count = res->count;
dev_dbg(&adev->dev, "Creating %d SDW Link devices\n", count);
- ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ ctx = devm_kzalloc(&adev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return NULL;
ctx->count = count;
- ctx->links = kcalloc(ctx->count, sizeof(*ctx->links), GFP_KERNEL);
+ ctx->links = devm_kcalloc(&adev->dev, ctx->count,
+ sizeof(*ctx->links), GFP_KERNEL);
if (!ctx->links)
- goto link_err;
+ return NULL;
+
+ ctx->count = count;
+ ctx->mmio_base = res->mmio_base;
+ ctx->link_mask = res->link_mask;
+ ctx->handle = res->handle;
+ mutex_init(&ctx->shim_lock);
link = ctx->links;
+ link_mask = ctx->link_mask;
+
+ INIT_LIST_HEAD(&ctx->link_list);
/* Create SDW Master devices */
- for (i = 0; i < count; i++) {
- if (link_mask && !(link_mask & BIT(i))) {
+ for (i = 0; i < count; i++, link++) {
+ if (!(link_mask & BIT(i))) {
dev_dbg(&adev->dev,
"Link %d masked, will not be enabled\n", i);
- link++;
continue;
}
+ link->mmio_base = res->mmio_base;
link->registers = res->mmio_base + SDW_LINK_BASE
- + (SDW_LINK_SIZE * i);
+ + (SDW_LINK_SIZE * i);
link->shim = res->mmio_base + SDW_SHIM_BASE;
link->alh = res->mmio_base + SDW_ALH_BASE;
link->ops = res->ops;
link->dev = res->dev;
+ link->shim_lock = &ctx->shim_lock;
+ link->shim_mask = &ctx->shim_mask;
+
memset(&pdevinfo, 0, sizeof(pdevinfo));
pdevinfo.parent = res->parent;
- pdevinfo.name = "int-sdw";
+ pdevinfo.name = "intel-sdw";
pdevinfo.id = i;
pdevinfo.fwnode = acpi_fwnode_handle(adev);
+ pdevinfo.data = link;
+ pdevinfo.size_data = sizeof(*link);
pdev = platform_device_register_full(&pdevinfo);
if (IS_ERR(pdev)) {
dev_err(&adev->dev,
"platform device creation failed: %ld\n",
PTR_ERR(pdev));
- goto pdev_err;
+ goto err;
}
-
link->pdev = pdev;
- link++;
+ link->cdns = platform_get_drvdata(pdev);
+
+ list_add_tail(&link->list, &ctx->link_list);
+ bus = &link->cdns->bus;
+ /* Calculate number of slaves */
+ list_for_each(node, &bus->slaves)
+ num_slaves++;
+ }
+
+ ctx->ids = devm_kcalloc(&adev->dev, num_slaves,
+ sizeof(*ctx->ids), GFP_KERNEL);
+ if (!ctx->ids)
+ goto err;
+
+ ctx->num_slaves = num_slaves;
+ i = 0;
+ list_for_each_entry(link, &ctx->link_list, list) {
+ bus = &link->cdns->bus;
+ list_for_each_entry(slave, &bus->slaves, node) {
+ ctx->ids[i].id = slave->id;
+ ctx->ids[i].link_id = bus->link_id;
+ i++;
+ }
}
return ctx;
-pdev_err:
- sdw_intel_cleanup_pdev(ctx);
-link_err:
- kfree(ctx);
+err:
+ ctx->count = i;
+ sdw_intel_cleanup(ctx);
return NULL;
}
+static int
+sdw_intel_startup_controller(struct sdw_intel_ctx *ctx)
+{
+ struct acpi_device *adev;
+ struct sdw_intel_link_res *link;
+ u32 caps;
+ u32 link_mask;
+ int i;
+
+ if (acpi_bus_get_device(ctx->handle, &adev))
+ return -EINVAL;
+
+ /* Check SNDWLCAP.LCOUNT */
+ caps = ioread32(ctx->mmio_base + SDW_SHIM_BASE + SDW_SHIM_LCAP);
+ caps &= GENMASK(2, 0);
+
+ /* Check HW supported vs property value */
+ if (caps < ctx->count) {
+ dev_err(&adev->dev,
+ "BIOS master count is larger than hardware capabilities\n");
+ return -EINVAL;
+ }
+
+ if (!ctx->links)
+ return -EINVAL;
+
+ link = ctx->links;
+ link_mask = ctx->link_mask;
+
+ /* Startup SDW Master devices */
+ for (i = 0; i < ctx->count; i++, link++) {
+ if (!(link_mask & BIT(i)))
+ continue;
+
+ intel_master_startup(link->pdev);
+ }
+
+ return 0;
+}
+
static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
void *cdata, void **return_value)
{
- struct sdw_intel_res *res = cdata;
+ struct sdw_intel_acpi_info *info = cdata;
struct acpi_device *adev;
acpi_status status;
u64 adr;
@@ -168,7 +356,7 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
return AE_NOT_FOUND;
}
- res->handle = handle;
+ info->handle = handle;
/*
* On some Intel platforms, multiple children of the HDAS
@@ -185,39 +373,93 @@ static acpi_status sdw_intel_acpi_cb(acpi_handle handle, u32 level,
}
/**
- * sdw_intel_init() - SoundWire Intel init routine
+ * sdw_intel_acpi_scan() - SoundWire Intel init routine
* @parent_handle: ACPI parent handle
- * @res: resource data
+ * @info: description of what firmware/DSDT tables expose
*
- * This scans the namespace and creates SoundWire link controller devices
- * based on the info queried.
+ * This scans the namespace and queries firmware to figure out which
+ * links to enable. A follow-up use of sdw_intel_probe() and
+ * sdw_intel_startup() is required for creation of devices and bus
+ * startup
*/
-void *sdw_intel_init(acpi_handle *parent_handle, struct sdw_intel_res *res)
+int sdw_intel_acpi_scan(acpi_handle *parent_handle,
+ struct sdw_intel_acpi_info *info)
{
acpi_status status;
status = acpi_walk_namespace(ACPI_TYPE_DEVICE,
parent_handle, 1,
sdw_intel_acpi_cb,
- NULL, res, NULL);
+ NULL, info, NULL);
if (ACPI_FAILURE(status))
- return NULL;
+ return -ENODEV;
- return sdw_intel_add_controller(res);
+ return sdw_intel_scan_controller(info);
}
+EXPORT_SYMBOL_NS(sdw_intel_acpi_scan, SOUNDWIRE_INTEL_INIT);
/**
+ * sdw_intel_probe() - SoundWire Intel probe routine
+ * @res: resource data
+ *
+ * This registers a platform device for each Master handled by the controller,
+ * and SoundWire Master and Slave devices will be created by the platform
+ * device probe. All the information necessary is stored in the context, and
+ * the res argument pointer can be freed after this step.
+ * This function will be called after sdw_intel_acpi_scan() by SOF probe.
+ */
+struct sdw_intel_ctx
+*sdw_intel_probe(struct sdw_intel_res *res)
+{
+ return sdw_intel_probe_controller(res);
+}
+EXPORT_SYMBOL_NS(sdw_intel_probe, SOUNDWIRE_INTEL_INIT);
+
+/**
+ * sdw_intel_startup() - SoundWire Intel startup
+ * @ctx: SoundWire context allocated in the probe
+ *
+ * Startup Intel SoundWire controller. This function will be called after
+ * Intel Audio DSP is powered up.
+ */
+int sdw_intel_startup(struct sdw_intel_ctx *ctx)
+{
+ return sdw_intel_startup_controller(ctx);
+}
+EXPORT_SYMBOL_NS(sdw_intel_startup, SOUNDWIRE_INTEL_INIT);
+/**
* sdw_intel_exit() - SoundWire Intel exit
- * @arg: callback context
+ * @ctx: SoundWire context allocated in the probe
*
* Delete the controller instances created and cleanup
*/
void sdw_intel_exit(struct sdw_intel_ctx *ctx)
{
- sdw_intel_cleanup_pdev(ctx);
- kfree(ctx);
+ sdw_intel_cleanup(ctx);
+}
+EXPORT_SYMBOL_NS(sdw_intel_exit, SOUNDWIRE_INTEL_INIT);
+
+void sdw_intel_process_wakeen_event(struct sdw_intel_ctx *ctx)
+{
+ struct sdw_intel_link_res *link;
+ u32 link_mask;
+ int i;
+
+ if (!ctx->links)
+ return;
+
+ link = ctx->links;
+ link_mask = ctx->link_mask;
+
+ /* Startup SDW Master devices */
+ for (i = 0; i < ctx->count; i++, link++) {
+ if (!(link_mask & BIT(i)))
+ continue;
+
+ intel_master_process_wakeen_event(link->pdev);
+ }
}
-EXPORT_SYMBOL(sdw_intel_exit);
+EXPORT_SYMBOL_NS(sdw_intel_process_wakeen_event, SOUNDWIRE_INTEL_INIT);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("Intel Soundwire Init Library");
diff --git a/drivers/soundwire/qcom.c b/drivers/soundwire/qcom.c
index a1c2a44a3b4d..915c2cf0c274 100644
--- a/drivers/soundwire/qcom.c
+++ b/drivers/soundwire/qcom.c
@@ -406,13 +406,13 @@ static int qcom_swrm_port_enable(struct sdw_bus *bus,
return ctrl->reg_write(ctrl, reg, val);
}
-static struct sdw_master_port_ops qcom_swrm_port_ops = {
+static const struct sdw_master_port_ops qcom_swrm_port_ops = {
.dpn_set_port_params = qcom_swrm_port_params,
.dpn_set_port_transport_params = qcom_swrm_transport_params,
.dpn_port_enable_ch = qcom_swrm_port_enable,
};
-static struct sdw_master_ops qcom_swrm_ops = {
+static const struct sdw_master_ops qcom_swrm_ops = {
.xfer_msg = qcom_swrm_xfer_msg,
.pre_bank_switch = qcom_swrm_pre_bank_switch,
};
diff --git a/drivers/soundwire/stream.c b/drivers/soundwire/stream.c
index a9a72574b34a..37290a799023 100644
--- a/drivers/soundwire/stream.c
+++ b/drivers/soundwire/stream.c
@@ -13,6 +13,7 @@
#include <linux/slab.h>
#include <linux/soundwire/sdw_registers.h>
#include <linux/soundwire/sdw.h>
+#include <sound/soc.h>
#include "bus.h"
/*
@@ -1826,3 +1827,100 @@ state_err:
return ret;
}
EXPORT_SYMBOL(sdw_deprepare_stream);
+
+static int set_stream(struct snd_pcm_substream *substream,
+ struct sdw_stream_runtime *sdw_stream)
+{
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct snd_soc_dai *dai;
+ int ret = 0;
+ int i;
+
+ /* Set stream pointer on all DAIs */
+ for_each_rtd_dais(rtd, i, dai) {
+ ret = snd_soc_dai_set_sdw_stream(dai, sdw_stream, substream->stream);
+ if (ret < 0) {
+ dev_err(rtd->dev, "failed to set stream pointer on dai %s", dai->name);
+ break;
+ }
+ }
+
+ return ret;
+}
+
+/**
+ * sdw_startup_stream() - Startup SoundWire stream
+ *
+ * @sdw_substream: Soundwire stream
+ *
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
+ */
+int sdw_startup_stream(void *sdw_substream)
+{
+ struct snd_pcm_substream *substream = sdw_substream;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sdw_stream_runtime *sdw_stream;
+ char *name;
+ int ret;
+
+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
+ name = kasprintf(GFP_KERNEL, "%s-Playback", substream->name);
+ else
+ name = kasprintf(GFP_KERNEL, "%s-Capture", substream->name);
+
+ if (!name)
+ return -ENOMEM;
+
+ sdw_stream = sdw_alloc_stream(name);
+ if (!sdw_stream) {
+ dev_err(rtd->dev, "alloc stream failed for substream DAI %s", substream->name);
+ ret = -ENOMEM;
+ goto error;
+ }
+
+ ret = set_stream(substream, sdw_stream);
+ if (ret < 0)
+ goto release_stream;
+ return 0;
+
+release_stream:
+ sdw_release_stream(sdw_stream);
+ set_stream(substream, NULL);
+error:
+ kfree(name);
+ return ret;
+}
+EXPORT_SYMBOL(sdw_startup_stream);
+
+/**
+ * sdw_shutdown_stream() - Shutdown SoundWire stream
+ *
+ * @sdw_substream: Soundwire stream
+ *
+ * Documentation/driver-api/soundwire/stream.rst explains this API in detail
+ */
+void sdw_shutdown_stream(void *sdw_substream)
+{
+ struct snd_pcm_substream *substream = sdw_substream;
+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
+ struct sdw_stream_runtime *sdw_stream;
+ struct snd_soc_dai *dai;
+
+ /* Find stream from first CPU DAI */
+ dai = asoc_rtd_to_cpu(rtd, 0);
+
+ sdw_stream = snd_soc_dai_get_sdw_stream(dai, substream->stream);
+
+ if (!sdw_stream) {
+ dev_err(rtd->dev, "no stream found for DAI %s", dai->name);
+ return;
+ }
+
+ /* release memory */
+ kfree(sdw_stream->name);
+ sdw_release_stream(sdw_stream);
+
+ /* clear DAI data */
+ set_stream(substream, NULL);
+}
+EXPORT_SYMBOL(sdw_shutdown_stream);
diff --git a/drivers/uio/uio_dmem_genirq.c b/drivers/uio/uio_dmem_genirq.c
index 6e27fe4fcca3..ec7f66f4555a 100644
--- a/drivers/uio/uio_dmem_genirq.c
+++ b/drivers/uio/uio_dmem_genirq.c
@@ -20,6 +20,7 @@
#include <linux/pm_runtime.h>
#include <linux/dma-mapping.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -199,6 +200,24 @@ static int uio_dmem_genirq_probe(struct platform_device *pdev)
goto bad1;
uioinfo->irq = ret;
}
+
+ if (uioinfo->irq) {
+ struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
+
+ /*
+ * If a level interrupt, dont do lazy disable. Otherwise the
+ * irq will fire again since clearing of the actual cause, on
+ * device level, is done in userspace
+ * irqd_is_level_type() isn't used since isn't valid until
+ * irq is configured.
+ */
+ if (irq_data &&
+ irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
+ dev_dbg(&pdev->dev, "disable lazy unmask\n");
+ irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
+ }
+ }
+
uiomem = &uioinfo->mem[0];
for (i = 0; i < pdev->num_resources; ++i) {
diff --git a/drivers/uio/uio_pdrv_genirq.c b/drivers/uio/uio_pdrv_genirq.c
index b60173bc93ce..63258b6accc4 100644
--- a/drivers/uio/uio_pdrv_genirq.c
+++ b/drivers/uio/uio_pdrv_genirq.c
@@ -20,6 +20,7 @@
#include <linux/stringify.h>
#include <linux/pm_runtime.h>
#include <linux/slab.h>
+#include <linux/irq.h>
#include <linux/of.h>
#include <linux/of_platform.h>
@@ -171,6 +172,23 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
}
}
+ if (uioinfo->irq) {
+ struct irq_data *irq_data = irq_get_irq_data(uioinfo->irq);
+
+ /*
+ * If a level interrupt, dont do lazy disable. Otherwise the
+ * irq will fire again since clearing of the actual cause, on
+ * device level, is done in userspace
+ * irqd_is_level_type() isn't used since isn't valid until
+ * irq is configured.
+ */
+ if (irq_data &&
+ irqd_get_trigger_type(irq_data) & IRQ_TYPE_LEVEL_MASK) {
+ dev_dbg(&pdev->dev, "disable lazy unmask\n");
+ irq_set_status_flags(uioinfo->irq, IRQ_DISABLE_UNLAZY);
+ }
+ }
+
uiomem = &uioinfo->mem[0];
for (i = 0; i < pdev->num_resources; ++i) {
@@ -187,8 +205,10 @@ static int uio_pdrv_genirq_probe(struct platform_device *pdev)
}
uiomem->memtype = UIO_MEM_PHYS;
- uiomem->addr = r->start;
- uiomem->size = resource_size(r);
+ uiomem->addr = r->start & PAGE_MASK;
+ uiomem->offs = r->start & ~PAGE_MASK;
+ uiomem->size = (uiomem->offs + resource_size(r)
+ + PAGE_SIZE - 1) & PAGE_MASK;
uiomem->name = r->name;
++uiomem;
}
diff --git a/drivers/virt/vboxguest/vboxguest_core.c b/drivers/virt/vboxguest/vboxguest_core.c
index 18ebd7a6af98..0b43efddea22 100644
--- a/drivers/virt/vboxguest/vboxguest_core.c
+++ b/drivers/virt/vboxguest/vboxguest_core.c
@@ -559,7 +559,7 @@ static int vbg_reset_host_event_filter(struct vbg_dev *gdev,
* Changes the event filter mask for the given session.
*
* This is called in response to VBG_IOCTL_CHANGE_FILTER_MASK as well as to
- * do session cleanup. Takes the session spinlock.
+ * do session cleanup. Takes the session mutex.
*
* Return: 0 or negative errno value.
* @gdev: The Guest extension device.
@@ -662,7 +662,156 @@ static int vbg_reset_host_capabilities(struct vbg_dev *gdev)
}
/**
- * Sets the guest capabilities for a session. Takes the session spinlock.
+ * Set guest capabilities on the host.
+ * Must be called with gdev->session_mutex hold.
+ * Return: 0 or negative errno value.
+ * @gdev: The Guest extension device.
+ * @session: The session.
+ * @session_termination: Set if we're called by the session cleanup code.
+ */
+static int vbg_set_host_capabilities(struct vbg_dev *gdev,
+ struct vbg_session *session,
+ bool session_termination)
+{
+ struct vmmdev_mask *req;
+ u32 caps;
+ int rc;
+
+ WARN_ON(!mutex_is_locked(&gdev->session_mutex));
+
+ caps = gdev->acquired_guest_caps | gdev->set_guest_caps_tracker.mask;
+
+ if (gdev->guest_caps_host == caps)
+ return 0;
+
+ /* On termination the requestor is the kernel, as we're cleaning up. */
+ req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES,
+ session_termination ? VBG_KERNEL_REQUEST :
+ session->requestor);
+ if (!req) {
+ gdev->guest_caps_host = U32_MAX;
+ return -ENOMEM;
+ }
+
+ req->or_mask = caps;
+ req->not_mask = ~caps;
+ rc = vbg_req_perform(gdev, req);
+ vbg_req_free(req, sizeof(*req));
+
+ gdev->guest_caps_host = (rc >= 0) ? caps : U32_MAX;
+
+ return vbg_status_code_to_errno(rc);
+}
+
+/**
+ * Acquire (get exclusive access) guest capabilities for a session.
+ * Takes the session mutex.
+ * Return: 0 or negative errno value.
+ * @gdev: The Guest extension device.
+ * @session: The session.
+ * @flags: Flags (VBGL_IOC_AGC_FLAGS_XXX).
+ * @or_mask: The capabilities to add.
+ * @not_mask: The capabilities to remove.
+ * @session_termination: Set if we're called by the session cleanup code.
+ * This tweaks the error handling so we perform
+ * proper session cleanup even if the host
+ * misbehaves.
+ */
+static int vbg_acquire_session_capabilities(struct vbg_dev *gdev,
+ struct vbg_session *session,
+ u32 or_mask, u32 not_mask,
+ u32 flags, bool session_termination)
+{
+ unsigned long irqflags;
+ bool wakeup = false;
+ int ret = 0;
+
+ mutex_lock(&gdev->session_mutex);
+
+ if (gdev->set_guest_caps_tracker.mask & or_mask) {
+ vbg_err("%s error: cannot acquire caps which are currently set\n",
+ __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /*
+ * Mark any caps in the or_mask as now being in acquire-mode. Note
+ * once caps are in acquire_mode they always stay in this mode.
+ * This impacts event handling, so we take the event-lock.
+ */
+ spin_lock_irqsave(&gdev->event_spinlock, irqflags);
+ gdev->acquire_mode_guest_caps |= or_mask;
+ spin_unlock_irqrestore(&gdev->event_spinlock, irqflags);
+
+ /* If we only have to switch the caps to acquire mode, we're done. */
+ if (flags & VBGL_IOC_AGC_FLAGS_CONFIG_ACQUIRE_MODE)
+ goto out;
+
+ not_mask &= ~or_mask; /* or_mask takes priority over not_mask */
+ not_mask &= session->acquired_guest_caps;
+ or_mask &= ~session->acquired_guest_caps;
+
+ if (or_mask == 0 && not_mask == 0)
+ goto out;
+
+ if (gdev->acquired_guest_caps & or_mask) {
+ ret = -EBUSY;
+ goto out;
+ }
+
+ gdev->acquired_guest_caps |= or_mask;
+ gdev->acquired_guest_caps &= ~not_mask;
+ /* session->acquired_guest_caps impacts event handling, take the lock */
+ spin_lock_irqsave(&gdev->event_spinlock, irqflags);
+ session->acquired_guest_caps |= or_mask;
+ session->acquired_guest_caps &= ~not_mask;
+ spin_unlock_irqrestore(&gdev->event_spinlock, irqflags);
+
+ ret = vbg_set_host_capabilities(gdev, session, session_termination);
+ /* Roll back on failure, unless it's session termination time. */
+ if (ret < 0 && !session_termination) {
+ gdev->acquired_guest_caps &= ~or_mask;
+ gdev->acquired_guest_caps |= not_mask;
+ spin_lock_irqsave(&gdev->event_spinlock, irqflags);
+ session->acquired_guest_caps &= ~or_mask;
+ session->acquired_guest_caps |= not_mask;
+ spin_unlock_irqrestore(&gdev->event_spinlock, irqflags);
+ }
+
+ /*
+ * If we added a capability, check if that means some other thread in
+ * our session should be unblocked because there are events pending
+ * (the result of vbg_get_allowed_event_mask_for_session() may change).
+ *
+ * HACK ALERT! When the seamless support capability is added we generate
+ * a seamless change event so that the ring-3 client can sync with
+ * the seamless state.
+ */
+ if (ret == 0 && or_mask != 0) {
+ spin_lock_irqsave(&gdev->event_spinlock, irqflags);
+
+ if (or_mask & VMMDEV_GUEST_SUPPORTS_SEAMLESS)
+ gdev->pending_events |=
+ VMMDEV_EVENT_SEAMLESS_MODE_CHANGE_REQUEST;
+
+ if (gdev->pending_events)
+ wakeup = true;
+
+ spin_unlock_irqrestore(&gdev->event_spinlock, irqflags);
+
+ if (wakeup)
+ wake_up(&gdev->event_wq);
+ }
+
+out:
+ mutex_unlock(&gdev->session_mutex);
+
+ return ret;
+}
+
+/**
+ * Sets the guest capabilities for a session. Takes the session mutex.
* Return: 0 or negative errno value.
* @gdev: The Guest extension device.
* @session: The session.
@@ -678,62 +827,40 @@ static int vbg_set_session_capabilities(struct vbg_dev *gdev,
u32 or_mask, u32 not_mask,
bool session_termination)
{
- struct vmmdev_mask *req;
u32 changed, previous;
- int rc, ret = 0;
-
- /*
- * Allocate a request buffer before taking the spinlock, when
- * the session is being terminated the requestor is the kernel,
- * as we're cleaning up.
- */
- req = vbg_req_alloc(sizeof(*req), VMMDEVREQ_SET_GUEST_CAPABILITIES,
- session_termination ? VBG_KERNEL_REQUEST :
- session->requestor);
- if (!req) {
- if (!session_termination)
- return -ENOMEM;
- /* Ignore allocation failure, we must do session cleanup. */
- }
+ int ret = 0;
mutex_lock(&gdev->session_mutex);
+ if (gdev->acquire_mode_guest_caps & or_mask) {
+ vbg_err("%s error: cannot set caps which are in acquire_mode\n",
+ __func__);
+ ret = -EBUSY;
+ goto out;
+ }
+
/* Apply the changes to the session mask. */
- previous = session->guest_caps;
- session->guest_caps |= or_mask;
- session->guest_caps &= ~not_mask;
+ previous = session->set_guest_caps;
+ session->set_guest_caps |= or_mask;
+ session->set_guest_caps &= ~not_mask;
/* If anything actually changed, update the global usage counters. */
- changed = previous ^ session->guest_caps;
+ changed = previous ^ session->set_guest_caps;
if (!changed)
goto out;
- vbg_track_bit_usage(&gdev->guest_caps_tracker, changed, previous);
- or_mask = gdev->guest_caps_tracker.mask;
-
- if (gdev->guest_caps_host == or_mask || !req)
- goto out;
+ vbg_track_bit_usage(&gdev->set_guest_caps_tracker, changed, previous);
- gdev->guest_caps_host = or_mask;
- req->or_mask = or_mask;
- req->not_mask = ~or_mask;
- rc = vbg_req_perform(gdev, req);
- if (rc < 0) {
- ret = vbg_status_code_to_errno(rc);
-
- /* Failed, roll back (unless it's session termination time). */
- gdev->guest_caps_host = U32_MAX;
- if (session_termination)
- goto out;
-
- vbg_track_bit_usage(&gdev->guest_caps_tracker, changed,
- session->guest_caps);
- session->guest_caps = previous;
+ ret = vbg_set_host_capabilities(gdev, session, session_termination);
+ /* Roll back on failure, unless it's session termination time. */
+ if (ret < 0 && !session_termination) {
+ vbg_track_bit_usage(&gdev->set_guest_caps_tracker, changed,
+ session->set_guest_caps);
+ session->set_guest_caps = previous;
}
out:
mutex_unlock(&gdev->session_mutex);
- vbg_req_free(req, sizeof(*req));
return ret;
}
@@ -949,6 +1076,7 @@ void vbg_core_close_session(struct vbg_session *session)
struct vbg_dev *gdev = session->gdev;
int i, rc;
+ vbg_acquire_session_capabilities(gdev, session, 0, U32_MAX, 0, true);
vbg_set_session_capabilities(gdev, session, 0, U32_MAX, true);
vbg_set_session_event_filter(gdev, session, 0, U32_MAX, true);
@@ -1006,6 +1134,25 @@ static int vbg_ioctl_driver_version_info(
return 0;
}
+/* Must be called with the event_lock held */
+static u32 vbg_get_allowed_event_mask_for_session(struct vbg_dev *gdev,
+ struct vbg_session *session)
+{
+ u32 acquire_mode_caps = gdev->acquire_mode_guest_caps;
+ u32 session_acquired_caps = session->acquired_guest_caps;
+ u32 allowed_events = VMMDEV_EVENT_VALID_EVENT_MASK;
+
+ if ((acquire_mode_caps & VMMDEV_GUEST_SUPPORTS_GRAPHICS) &&
+ !(session_acquired_caps & VMMDEV_GUEST_SUPPORTS_GRAPHICS))
+ allowed_events &= ~VMMDEV_EVENT_DISPLAY_CHANGE_REQUEST;
+
+ if ((acquire_mode_caps & VMMDEV_GUEST_SUPPORTS_SEAMLESS) &&
+ !(session_acquired_caps & VMMDEV_GUEST_SUPPORTS_SEAMLESS))
+ allowed_events &= ~VMMDEV_EVENT_SEAMLESS_MODE_CHANGE_REQUEST;
+
+ return allowed_events;
+}
+
static bool vbg_wait_event_cond(struct vbg_dev *gdev,
struct vbg_session *session,
u32 event_mask)
@@ -1017,6 +1164,7 @@ static bool vbg_wait_event_cond(struct vbg_dev *gdev,
spin_lock_irqsave(&gdev->event_spinlock, flags);
events = gdev->pending_events & event_mask;
+ events &= vbg_get_allowed_event_mask_for_session(gdev, session);
wakeup = events || session->cancel_waiters;
spin_unlock_irqrestore(&gdev->event_spinlock, flags);
@@ -1031,6 +1179,7 @@ static u32 vbg_consume_events_locked(struct vbg_dev *gdev,
{
u32 events = gdev->pending_events & event_mask;
+ events &= vbg_get_allowed_event_mask_for_session(gdev, session);
gdev->pending_events &= ~events;
return events;
}
@@ -1150,7 +1299,9 @@ static int vbg_req_allowed(struct vbg_dev *gdev, struct vbg_session *session,
case VMMDEVREQ_VIDEO_ACCEL_ENABLE:
case VMMDEVREQ_VIDEO_ACCEL_FLUSH:
case VMMDEVREQ_VIDEO_SET_VISIBLE_REGION:
+ case VMMDEVREQ_VIDEO_UPDATE_MONITOR_POSITIONS:
case VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX:
+ case VMMDEVREQ_GET_DISPLAY_CHANGE_REQ_MULTI:
case VMMDEVREQ_GET_SEAMLESS_CHANGE_REQ:
case VMMDEVREQ_GET_VRDPCHANGE_REQ:
case VMMDEVREQ_LOG_STRING:
@@ -1432,6 +1583,29 @@ static int vbg_ioctl_change_filter_mask(struct vbg_dev *gdev,
false);
}
+static int vbg_ioctl_acquire_guest_capabilities(struct vbg_dev *gdev,
+ struct vbg_session *session,
+ struct vbg_ioctl_acquire_guest_caps *caps)
+{
+ u32 flags, or_mask, not_mask;
+
+ if (vbg_ioctl_chk(&caps->hdr, sizeof(caps->u.in), 0))
+ return -EINVAL;
+
+ flags = caps->u.in.flags;
+ or_mask = caps->u.in.or_mask;
+ not_mask = caps->u.in.not_mask;
+
+ if (flags & ~VBGL_IOC_AGC_FLAGS_VALID_MASK)
+ return -EINVAL;
+
+ if ((or_mask | not_mask) & ~VMMDEV_GUEST_CAPABILITIES_MASK)
+ return -EINVAL;
+
+ return vbg_acquire_session_capabilities(gdev, session, or_mask,
+ not_mask, flags, false);
+}
+
static int vbg_ioctl_change_guest_capabilities(struct vbg_dev *gdev,
struct vbg_session *session, struct vbg_ioctl_set_guest_caps *caps)
{
@@ -1452,7 +1626,7 @@ static int vbg_ioctl_change_guest_capabilities(struct vbg_dev *gdev,
if (ret)
return ret;
- caps->u.out.session_caps = session->guest_caps;
+ caps->u.out.session_caps = session->set_guest_caps;
caps->u.out.global_caps = gdev->guest_caps_host;
return 0;
@@ -1541,6 +1715,8 @@ int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data)
return vbg_ioctl_interrupt_all_wait_events(gdev, session, data);
case VBG_IOCTL_CHANGE_FILTER_MASK:
return vbg_ioctl_change_filter_mask(gdev, session, data);
+ case VBG_IOCTL_ACQUIRE_GUEST_CAPABILITIES:
+ return vbg_ioctl_acquire_guest_capabilities(gdev, session, data);
case VBG_IOCTL_CHANGE_GUEST_CAPABILITIES:
return vbg_ioctl_change_guest_capabilities(gdev, session, data);
case VBG_IOCTL_CHECK_BALLOON:
@@ -1563,7 +1739,7 @@ int vbg_core_ioctl(struct vbg_session *session, unsigned int req, void *data)
return vbg_ioctl_log(data);
}
- vbg_debug("VGDrvCommonIoCtl: Unknown req %#08x\n", req);
+ vbg_err_ratelimited("Userspace made an unknown ioctl req %#08x\n", req);
return -ENOTTY;
}
diff --git a/drivers/virt/vboxguest/vboxguest_core.h b/drivers/virt/vboxguest/vboxguest_core.h
index 77c3a9c8255d..ab4bf64e2cec 100644
--- a/drivers/virt/vboxguest/vboxguest_core.h
+++ b/drivers/virt/vboxguest/vboxguest_core.h
@@ -118,11 +118,21 @@ struct vbg_dev {
u32 event_filter_host;
/**
- * Usage counters for guest capabilities. Indexed by capability bit
+ * Guest capabilities which have been switched to acquire_mode.
+ */
+ u32 acquire_mode_guest_caps;
+ /**
+ * Guest capabilities acquired by vbg_acquire_session_capabilities().
+ * Only one session can acquire a capability at a time.
+ */
+ u32 acquired_guest_caps;
+ /**
+ * Usage counters for guest capabilities requested through
+ * vbg_set_session_capabilities(). Indexed by capability bit
* number, one count per session using a capability.
* Protected by session_mutex.
*/
- struct vbg_bit_usage_tracker guest_caps_tracker;
+ struct vbg_bit_usage_tracker set_guest_caps_tracker;
/**
* The guest capabilities last reported to the host (or UINT32_MAX).
* Protected by session_mutex.
@@ -164,11 +174,16 @@ struct vbg_session {
*/
u32 event_filter;
/**
- * Guest capabilities for this session.
+ * Guest capabilities acquired by vbg_acquire_session_capabilities().
+ * Only one session can acquire a capability at a time.
+ */
+ u32 acquired_guest_caps;
+ /**
+ * Guest capabilities set through vbg_set_session_capabilities().
* A capability claimed by any guest session will be reported to the
* host. Protected by vbg_gdev.session_mutex.
*/
- u32 guest_caps;
+ u32 set_guest_caps;
/** VMMDEV_REQUESTOR_* flags */
u32 requestor;
/** Set on CANCEL_ALL_WAITEVENTS, protected by vbg_devevent_spinlock. */
diff --git a/drivers/virt/vboxguest/vboxguest_utils.c b/drivers/virt/vboxguest/vboxguest_utils.c
index 7396187ee32a..ea05af41ec69 100644
--- a/drivers/virt/vboxguest/vboxguest_utils.c
+++ b/drivers/virt/vboxguest/vboxguest_utils.c
@@ -59,6 +59,7 @@ EXPORT_SYMBOL(name)
VBG_LOG(vbg_info, pr_info);
VBG_LOG(vbg_warn, pr_warn);
VBG_LOG(vbg_err, pr_err);
+VBG_LOG(vbg_err_ratelimited, pr_err_ratelimited);
#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG)
VBG_LOG(vbg_debug, pr_debug);
#endif
diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h
index de8493cc3082..f9eb475810a0 100644
--- a/include/asm-generic/vmlinux.lds.h
+++ b/include/asm-generic/vmlinux.lds.h
@@ -339,9 +339,9 @@
*(__tracepoints) \
/* implement dynamic printk debug */ \
. = ALIGN(8); \
- __start___verbose = .; \
- KEEP(*(__verbose)) \
- __stop___verbose = .; \
+ __start___dyndbg = .; \
+ KEEP(*(__dyndbg)) \
+ __stop___dyndbg = .; \
LIKELY_PROFILE() \
BRANCH_PROFILE() \
TRACE_PRINTKS() \
diff --git a/include/dt-bindings/phy/phy.h b/include/dt-bindings/phy/phy.h
index 3727ef72138b..36e8c241cf48 100644
--- a/include/dt-bindings/phy/phy.h
+++ b/include/dt-bindings/phy/phy.h
@@ -18,5 +18,6 @@
#define PHY_TYPE_UFS 5
#define PHY_TYPE_DP 6
#define PHY_TYPE_XPCS 7
+#define PHY_TYPE_SGMII 8
#endif /* _DT_BINDINGS_PHY */
diff --git a/include/linux/coresight.h b/include/linux/coresight.h
index e3e9f0e3a878..58fffdecdbfd 100644
--- a/include/linux/coresight.h
+++ b/include/linux/coresight.h
@@ -48,6 +48,7 @@ enum coresight_dev_subtype_sink {
CORESIGHT_DEV_SUBTYPE_SINK_NONE,
CORESIGHT_DEV_SUBTYPE_SINK_PORT,
CORESIGHT_DEV_SUBTYPE_SINK_BUFFER,
+ CORESIGHT_DEV_SUBTYPE_SINK_SYSMEM,
};
enum coresight_dev_subtype_link {
@@ -179,8 +180,10 @@ struct coresight_sysfs_link {
* @enable: 'true' if component is currently part of an active path.
* @activated: 'true' only if a _sink_ has been activated. A sink can be
* activated but not yet enabled. Enabling for a _sink_
- * appens when a source has been selected for that it.
+ * happens when a source has been selected and a path is enabled
+ * from source to that sink.
* @ea: Device attribute for sink representation under PMU directory.
+ * @def_sink: cached reference to default sink found for this device.
* @ect_dev: Associated cross trigger device. Not part of the trace data
* path or connections.
* @nr_links: number of sysfs links created to other components from this
@@ -199,6 +202,7 @@ struct coresight_device {
/* sink specific fields */
bool activated; /* true only if a sink is part of a path */
struct dev_ext_attribute *ea;
+ struct coresight_device *def_sink;
/* cross trigger handling */
struct coresight_device *ect_dev;
/* sysfs links between components */
diff --git a/include/linux/dynamic_debug.h b/include/linux/dynamic_debug.h
index abcd5fde30eb..aa9ff9e1c0b3 100644
--- a/include/linux/dynamic_debug.h
+++ b/include/linux/dynamic_debug.h
@@ -80,7 +80,7 @@ void __dynamic_ibdev_dbg(struct _ddebug *descriptor,
#define DEFINE_DYNAMIC_DEBUG_METADATA(name, fmt) \
static struct _ddebug __aligned(8) \
- __attribute__((section("__verbose"))) name = { \
+ __section(__dyndbg) name = { \
.modname = KBUILD_MODNAME, \
.function = __func__, \
.filename = __FILE__, \
@@ -133,7 +133,7 @@ void __dynamic_ibdev_dbg(struct _ddebug *descriptor,
/*
* "Factory macro" for generating a call to func, guarded by a
- * DYNAMIC_DEBUG_BRANCH. The dynamic debug decriptor will be
+ * DYNAMIC_DEBUG_BRANCH. The dynamic debug descriptor will be
* initialized using the fmt argument. The function will be called with
* the address of the descriptor as first argument, followed by all
* the varargs. Note that fmt is repeated in invocations of this
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h
index 682dbf694007..c3e5ab014caf 100644
--- a/include/linux/firmware/intel/stratix10-smc.h
+++ b/include/linux/firmware/intel/stratix10-smc.h
@@ -361,3 +361,46 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)
#define INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER 15
#define INTEL_SIP_SMC_RSU_RETRY_COUNTER \
INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_RETRY_COUNTER)
+
+/**
+ * Request INTEL_SIP_SMC_RSU_DCMF_VERSION
+ *
+ * Sync call used by service driver at EL1 to query DCMF (Decision
+ * Configuration Management Firmware) version from FW
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_DCMF_VERSION
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 dcmf1 | dcmf0
+ * a2 dcmf3 | dcmf2
+ *
+ * Or
+ *
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION 16
+#define INTEL_SIP_SMC_RSU_DCMF_VERSION \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_DCMF_VERSION)
+
+/**
+ * Request INTEL_SIP_SMC_RSU_MAX_RETRY
+ *
+ * Sync call used by service driver at EL1 to query max retry value from FW
+ *
+ * Call register usage:
+ * a0 INTEL_SIP_SMC_RSU_MAX_RETRY
+ * a1-7 not used
+ *
+ * Return status
+ * a0 INTEL_SIP_SMC_STATUS_OK
+ * a1 max retry value
+ *
+ * Or
+ * a0 INTEL_SIP_SMC_RSU_ERROR
+ */
+#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18
+#define INTEL_SIP_SMC_RSU_MAX_RETRY \
+ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY)
diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h
index 64213c3e82f5..a93d85932eb9 100644
--- a/include/linux/firmware/intel/stratix10-svc-client.h
+++ b/include/linux/firmware/intel/stratix10-svc-client.h
@@ -54,18 +54,17 @@
* Flag bit for COMMAND_RECONFIG
*
* COMMAND_RECONFIG_FLAG_PARTIAL:
- * Set to FPGA configuration type (full or partial), the default
- * is full reconfig.
+ * Set to FPGA configuration type (full or partial).
*/
-#define COMMAND_RECONFIG_FLAG_PARTIAL 0
+#define COMMAND_RECONFIG_FLAG_PARTIAL 1
/**
* Timeout settings for service clients:
* timeout value used in Stratix10 FPGA manager driver.
* timeout value used in RSU driver
*/
-#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 100
-#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 240
+#define SVC_RECONFIG_REQUEST_TIMEOUT_MS 300
+#define SVC_RECONFIG_BUFFER_TIMEOUT_MS 720
#define SVC_RSU_REQUEST_TIMEOUT_MS 300
struct stratix10_svc_chan;
@@ -99,6 +98,12 @@ struct stratix10_svc_chan;
*
* @COMMAND_RSU_RETRY: query firmware for the current image's retry counter,
* return status is SVC_STATUS_OK or SVC_STATUS_ERROR
+ *
+ * @COMMAND_RSU_MAX_RETRY: query firmware for the max retry value,
+ * return status is SVC_STATUS_OK or SVC_STATUS_ERROR
+ *
+ * @COMMAND_RSU_DCMF_VERSION: query firmware for the DCMF version, return status
+ * is SVC_STATUS_OK or SVC_STATUS_ERROR
*/
enum stratix10_svc_command_code {
COMMAND_NOOP = 0,
@@ -110,6 +115,8 @@ enum stratix10_svc_command_code {
COMMAND_RSU_UPDATE,
COMMAND_RSU_NOTIFY,
COMMAND_RSU_RETRY,
+ COMMAND_RSU_MAX_RETRY,
+ COMMAND_RSU_DCMF_VERSION,
};
/**
diff --git a/include/linux/fsl/mc.h b/include/linux/fsl/mc.h
index 2b5f8366dbe1..a428c61ead6e 100644
--- a/include/linux/fsl/mc.h
+++ b/include/linux/fsl/mc.h
@@ -339,7 +339,7 @@ struct fsl_mc_io {
* This field is only meaningful if the
* FSL_MC_IO_ATOMIC_CONTEXT_PORTAL flag is set
*/
- spinlock_t spinlock; /* serializes mc_send_command() */
+ raw_spinlock_t spinlock; /* serializes mc_send_command() */
};
};
@@ -433,6 +433,11 @@ extern struct device_type fsl_mc_bus_dpmcp_type;
extern struct device_type fsl_mc_bus_dpmac_type;
extern struct device_type fsl_mc_bus_dprtc_type;
extern struct device_type fsl_mc_bus_dpseci_type;
+extern struct device_type fsl_mc_bus_dpdmux_type;
+extern struct device_type fsl_mc_bus_dpdcei_type;
+extern struct device_type fsl_mc_bus_dpaiop_type;
+extern struct device_type fsl_mc_bus_dpci_type;
+extern struct device_type fsl_mc_bus_dpdmai_type;
static inline bool is_fsl_mc_bus_dprc(const struct fsl_mc_device *mc_dev)
{
@@ -454,6 +459,11 @@ static inline bool is_fsl_mc_bus_dpsw(const struct fsl_mc_device *mc_dev)
return mc_dev->dev.type == &fsl_mc_bus_dpsw_type;
}
+static inline bool is_fsl_mc_bus_dpdmux(const struct fsl_mc_device *mc_dev)
+{
+ return mc_dev->dev.type == &fsl_mc_bus_dpdmux_type;
+}
+
static inline bool is_fsl_mc_bus_dpbp(const struct fsl_mc_device *mc_dev)
{
return mc_dev->dev.type == &fsl_mc_bus_dpbp_type;
@@ -484,6 +494,26 @@ static inline bool is_fsl_mc_bus_dpseci(const struct fsl_mc_device *mc_dev)
return mc_dev->dev.type == &fsl_mc_bus_dpseci_type;
}
+static inline bool is_fsl_mc_bus_dpdcei(const struct fsl_mc_device *mc_dev)
+{
+ return mc_dev->dev.type == &fsl_mc_bus_dpdcei_type;
+}
+
+static inline bool is_fsl_mc_bus_dpaiop(const struct fsl_mc_device *mc_dev)
+{
+ return mc_dev->dev.type == &fsl_mc_bus_dpaiop_type;
+}
+
+static inline bool is_fsl_mc_bus_dpci(const struct fsl_mc_device *mc_dev)
+{
+ return mc_dev->dev.type == &fsl_mc_bus_dpci_type;
+}
+
+static inline bool is_fsl_mc_bus_dpdmai(const struct fsl_mc_device *mc_dev)
+{
+ return mc_dev->dev.type == &fsl_mc_bus_dpdmai_type;
+}
+
/*
* Data Path Buffer Pool (DPBP) API
* Contains initialization APIs and runtime control APIs for DPBP
diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
index 0c494534b4d3..4735518de515 100644
--- a/include/linux/interconnect-provider.h
+++ b/include/linux/interconnect-provider.h
@@ -41,6 +41,7 @@ struct icc_node *of_icc_xlate_onecell(struct of_phandle_args *spec,
* @xlate: provider-specific callback for mapping nodes from phandle arguments
* @dev: the device this interconnect provider belongs to
* @users: count of active users
+ * @inter_set: whether inter-provider pairs will be configured with @set
* @data: pointer to private data
*/
struct icc_provider {
@@ -53,6 +54,7 @@ struct icc_provider {
struct icc_node* (*xlate)(struct of_phandle_args *spec, void *data);
struct device *dev;
int users;
+ bool inter_set;
void *data;
};
@@ -103,6 +105,7 @@ void icc_node_del(struct icc_node *node);
int icc_nodes_remove(struct icc_provider *provider);
int icc_provider_add(struct icc_provider *provider);
int icc_provider_del(struct icc_provider *provider);
+struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec);
#else
@@ -117,7 +120,7 @@ static inline struct icc_node *icc_node_create(int id)
return ERR_PTR(-ENOTSUPP);
}
-void icc_node_destroy(int id)
+static inline void icc_node_destroy(int id)
{
}
@@ -126,16 +129,16 @@ static inline int icc_link_create(struct icc_node *node, const int dst_id)
return -ENOTSUPP;
}
-int icc_link_destroy(struct icc_node *src, struct icc_node *dst)
+static inline int icc_link_destroy(struct icc_node *src, struct icc_node *dst)
{
return -ENOTSUPP;
}
-void icc_node_add(struct icc_node *node, struct icc_provider *provider)
+static inline void icc_node_add(struct icc_node *node, struct icc_provider *provider)
{
}
-void icc_node_del(struct icc_node *node)
+static inline void icc_node_del(struct icc_node *node)
{
}
@@ -154,6 +157,11 @@ static inline int icc_provider_del(struct icc_provider *provider)
return -ENOTSUPP;
}
+static inline struct icc_node *of_icc_get_from_provider(struct of_phandle_args *spec)
+{
+ return ERR_PTR(-ENOTSUPP);
+}
+
#endif /* CONFIG_INTERCONNECT */
#endif /* __LINUX_INTERCONNECT_PROVIDER_H */
diff --git a/include/linux/mic_bus.h b/include/linux/mic_bus.h
index 491156a2359f..e99c789424e0 100644
--- a/include/linux/mic_bus.h
+++ b/include/linux/mic_bus.h
@@ -6,7 +6,7 @@
*
* Intel MIC Bus driver.
*
- * This implementation is very similar to the the virtio bus driver
+ * This implementation is very similar to the virtio bus driver
* implementation @ include/linux/virtio.h.
*/
#ifndef _MIC_BUS_H_
diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h
index e14cbe444afc..5b08a473cdba 100644
--- a/include/linux/mod_devicetable.h
+++ b/include/linux/mod_devicetable.h
@@ -251,6 +251,8 @@ struct hda_device_id {
struct sdw_device_id {
__u16 mfg_id;
__u16 part_id;
+ __u8 sdw_version;
+ __u8 class_id;
kernel_ulong_t driver_data;
};
diff --git a/include/linux/nvmem-consumer.h b/include/linux/nvmem-consumer.h
index 1b311d27c9b8..052293f4cbdb 100644
--- a/include/linux/nvmem-consumer.h
+++ b/include/linux/nvmem-consumer.h
@@ -61,6 +61,7 @@ void nvmem_cell_put(struct nvmem_cell *cell);
void devm_nvmem_cell_put(struct device *dev, struct nvmem_cell *cell);
void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len);
int nvmem_cell_write(struct nvmem_cell *cell, void *buf, size_t len);
+int nvmem_cell_read_u8(struct device *dev, const char *cell_id, u8 *val);
int nvmem_cell_read_u16(struct device *dev, const char *cell_id, u16 *val);
int nvmem_cell_read_u32(struct device *dev, const char *cell_id, u32 *val);
int nvmem_cell_read_u64(struct device *dev, const char *cell_id, u64 *val);
diff --git a/include/linux/nvmem-provider.h b/include/linux/nvmem-provider.h
index 6d6f8e5d24c9..06409a6c40bc 100644
--- a/include/linux/nvmem-provider.h
+++ b/include/linux/nvmem-provider.h
@@ -27,6 +27,9 @@ enum nvmem_type {
NVMEM_TYPE_BATTERY_BACKED,
};
+#define NVMEM_DEVID_NONE (-1)
+#define NVMEM_DEVID_AUTO (-2)
+
/**
* struct nvmem_config - NVMEM device configuration
*
diff --git a/include/linux/rtsx_pci.h b/include/linux/rtsx_pci.h
index e8780d4e4636..745f5e73f99a 100644
--- a/include/linux/rtsx_pci.h
+++ b/include/linux/rtsx_pci.h
@@ -99,18 +99,6 @@
#define rtsx_pci_readb(pcr, reg) \
ioread8((pcr)->remap_addr + reg)
-#define rtsx_pci_read_config_byte(pcr, where, val) \
- pci_read_config_byte((pcr)->pci, where, val)
-
-#define rtsx_pci_write_config_byte(pcr, where, val) \
- pci_write_config_byte((pcr)->pci, where, val)
-
-#define rtsx_pci_read_config_dword(pcr, where, val) \
- pci_read_config_dword((pcr)->pci, where, val)
-
-#define rtsx_pci_write_config_dword(pcr, where, val) \
- pci_write_config_dword((pcr)->pci, where, val)
-
#define STATE_TRANS_NONE 0
#define STATE_TRANS_CMD 1
#define STATE_TRANS_BUF 2
@@ -305,6 +293,8 @@
#define SD30_CLK_STOP_CFG0 0x01
#define REG_PRE_RW_MODE 0xFD70
#define EN_INFINITE_MODE 0x01
+#define REG_CRC_DUMMY_0 0xFD71
+#define CFG_SD_POW_AUTO_PD (1<<0)
#define SRCTL 0xFC13
@@ -599,6 +589,7 @@
#define ASPM_FORCE_CTL 0xFE57
#define FORCE_ASPM_CTL0 0x10
+#define FORCE_ASPM_CTL1 0x20
#define FORCE_ASPM_VAL_MASK 0x03
#define FORCE_ASPM_L1_EN 0x02
#define FORCE_ASPM_L0_EN 0x01
@@ -667,6 +658,11 @@
#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
+#define REG_CFG_OOBS_OFF_TIMER 0xFEA6
+#define REG_CFG_OOBS_ON_TIMER 0xFEA7
+#define REG_CFG_VCM_ON_TIMER 0xFEA8
+#define REG_CFG_OOBS_POLLING 0xFEA9
+
/* Memory mapping */
#define SRAM_BASE 0xE600
#define RBUF_BASE 0xF400
@@ -1041,10 +1037,6 @@
#define PHY_DIG1E_RX_EN_KEEP 0x0001
#define PHY_DUM_REG 0x1F
-#define PCR_ASPM_SETTING_REG1 0x160
-#define PCR_ASPM_SETTING_REG2 0x168
-#define PCR_ASPM_SETTING_5260 0x178
-
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
@@ -1091,11 +1083,6 @@ struct pcr_ops {
enum PDEV_STAT {PDEV_STAT_IDLE, PDEV_STAT_RUN};
-#define ASPM_L1_1_EN_MASK BIT(3)
-#define ASPM_L1_2_EN_MASK BIT(2)
-#define PM_L1_1_EN_MASK BIT(1)
-#define PM_L1_2_EN_MASK BIT(0)
-
#define ASPM_L1_1_EN BIT(0)
#define ASPM_L1_2_EN BIT(1)
#define PM_L1_1_EN BIT(2)
@@ -1158,7 +1145,6 @@ struct rtsx_hw_param {
struct rtsx_pcr {
struct pci_dev *pci;
unsigned int id;
- int pcie_cap;
struct rtsx_cr_option option;
struct rtsx_hw_param hw_param;
@@ -1204,6 +1190,7 @@ struct rtsx_pcr {
#define EXTRA_CAPS_MMC_HSDDR (1 << 3)
#define EXTRA_CAPS_MMC_HS200 (1 << 4)
#define EXTRA_CAPS_MMC_8BIT (1 << 5)
+#define EXTRA_CAPS_NO_MMC (1 << 7)
u32 extra_caps;
#define IC_VER_A 0
@@ -1242,6 +1229,7 @@ struct rtsx_pcr {
u8 dma_error_count;
u8 ocp_stat;
u8 ocp_stat2;
+ u8 rtd3_en;
};
#define PID_524A 0x524A
@@ -1250,6 +1238,7 @@ struct rtsx_pcr {
#define PID_525A 0x525A
#define PID_5260 0x5260
#define PID_5261 0x5261
+#define PID_5228 0x5228
#define CHK_PCI_PID(pcr, pid) ((pcr)->pci->device == (pid))
#define PCI_VID(pcr) ((pcr)->pci->vendor)
diff --git a/include/linux/soundwire/sdw.h b/include/linux/soundwire/sdw.h
index 9c27a32df9bb..76052f12c9f7 100644
--- a/include/linux/soundwire/sdw.h
+++ b/include/linux/soundwire/sdw.h
@@ -88,10 +88,10 @@ enum sdw_slave_status {
* @SDW_CLK_POST_DEPREPARE: post clock stop de-prepare
*/
enum sdw_clk_stop_type {
- SDW_CLK_PRE_PREPARE = 0,
- SDW_CLK_POST_PREPARE,
- SDW_CLK_PRE_DEPREPARE,
- SDW_CLK_POST_DEPREPARE,
+ SDW_CLK_PRE_PREPARE = 0,
+ SDW_CLK_POST_PREPARE,
+ SDW_CLK_PRE_DEPREPARE,
+ SDW_CLK_POST_DEPREPARE,
};
/**
@@ -152,19 +152,19 @@ enum sdw_data_direction {
*
* @SDW_PORT_DATA_MODE_NORMAL: Normal data mode where audio data is received
* and transmitted.
+ * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce
+ * a pseudo random data pattern that is transferred
+ * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of
+ * logic 0. The encoding will result in no signal transitions
* @SDW_PORT_DATA_MODE_STATIC_1: Simple test mode which uses static value of
* logic 1. The encoding will result in signal transitions at every bitslot
* owned by this Port
- * @SDW_PORT_DATA_MODE_STATIC_0: Simple test mode which uses static value of
- * logic 0. The encoding will result in no signal transitions
- * @SDW_PORT_DATA_MODE_PRBS: Test mode which uses a PRBS generator to produce
- * a pseudo random data pattern that is transferred
*/
enum sdw_port_data_mode {
SDW_PORT_DATA_MODE_NORMAL = 0,
- SDW_PORT_DATA_MODE_STATIC_1 = 1,
+ SDW_PORT_DATA_MODE_PRBS = 1,
SDW_PORT_DATA_MODE_STATIC_0 = 2,
- SDW_PORT_DATA_MODE_PRBS = 3,
+ SDW_PORT_DATA_MODE_STATIC_1 = 3,
};
/*
@@ -426,8 +426,7 @@ int sdw_slave_read_prop(struct sdw_slave *slave);
* struct sdw_slave_id - Slave ID
* @mfg_id: MIPI Manufacturer ID
* @part_id: Device Part ID
- * @class_id: MIPI Class ID, unused now.
- * Currently a placeholder in MIPI SoundWire Spec
+ * @class_id: MIPI Class ID (defined starting with SoundWire 1.2 spec)
* @unique_id: Device unique ID
* @sdw_version: SDW version implemented
*
@@ -659,10 +658,14 @@ struct sdw_driver {
struct device_driver driver;
};
-#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \
- { .mfg_id = (_mfg_id), .part_id = (_part_id), \
+#define SDW_SLAVE_ENTRY_EXT(_mfg_id, _part_id, _version, _c_id, _drv_data) \
+ { .mfg_id = (_mfg_id), .part_id = (_part_id), \
+ .sdw_version = (_version), .class_id = (_c_id), \
.driver_data = (unsigned long)(_drv_data) }
+#define SDW_SLAVE_ENTRY(_mfg_id, _part_id, _drv_data) \
+ SDW_SLAVE_ENTRY_EXT((_mfg_id), (_part_id), 0, 0, (_drv_data))
+
int sdw_handle_slave_status(struct sdw_bus *bus,
enum sdw_slave_status status[]);
@@ -952,10 +955,12 @@ int sdw_stream_remove_master(struct sdw_bus *bus,
struct sdw_stream_runtime *stream);
int sdw_stream_remove_slave(struct sdw_slave *slave,
struct sdw_stream_runtime *stream);
+int sdw_startup_stream(void *sdw_substream);
int sdw_prepare_stream(struct sdw_stream_runtime *stream);
int sdw_enable_stream(struct sdw_stream_runtime *stream);
int sdw_disable_stream(struct sdw_stream_runtime *stream);
int sdw_deprepare_stream(struct sdw_stream_runtime *stream);
+void sdw_shutdown_stream(void *sdw_substream);
int sdw_bus_prep_clk_stop(struct sdw_bus *bus);
int sdw_bus_clk_stop(struct sdw_bus *bus);
int sdw_bus_exit_clk_stop(struct sdw_bus *bus);
diff --git a/include/linux/soundwire/sdw_intel.h b/include/linux/soundwire/sdw_intel.h
index 979b41b5dcb4..120ffddc03d2 100644
--- a/include/linux/soundwire/sdw_intel.h
+++ b/include/linux/soundwire/sdw_intel.h
@@ -115,6 +115,7 @@ struct sdw_intel_slave_id {
* links
* @link_list: list to handle interrupts across all links
* @shim_lock: mutex to handle concurrent rmw access to shared SHIM registers.
+ * @shim_mask: flags to track initialization of SHIM shared registers
*/
struct sdw_intel_ctx {
int count;
@@ -126,6 +127,7 @@ struct sdw_intel_ctx {
struct sdw_intel_slave_id *ids;
struct list_head link_list;
struct mutex shim_lock; /* lock for access to shared SHIM registers */
+ u32 shim_mask;
};
/**
diff --git a/include/linux/soundwire/sdw_registers.h b/include/linux/soundwire/sdw_registers.h
index a686f7988156..5d3c271af7d1 100644
--- a/include/linux/soundwire/sdw_registers.h
+++ b/include/linux/soundwire/sdw_registers.h
@@ -12,7 +12,7 @@
#define SDW_REG_SHIFT(n) (ffs(n) - 1)
/*
- * SDW registers as defined by MIPI 1.1 Spec
+ * SDW registers as defined by MIPI 1.2 Spec
*/
#define SDW_REGADDR GENMASK(14, 0)
#define SDW_SCP_ADDRPAGE2_MASK GENMASK(22, 15)
@@ -43,6 +43,8 @@
#define SDW_DP0_INT_TEST_FAIL BIT(0)
#define SDW_DP0_INT_PORT_READY BIT(1)
#define SDW_DP0_INT_BRA_FAILURE BIT(2)
+#define SDW_DP0_SDCA_CASCADE BIT(3)
+/* BIT(4) not allocated in SoundWire specification 1.2 */
#define SDW_DP0_INT_IMPDEF1 BIT(5)
#define SDW_DP0_INT_IMPDEF2 BIT(6)
#define SDW_DP0_INT_IMPDEF3 BIT(7)
@@ -106,6 +108,20 @@
#define SDW_SCP_ADDRPAGE2 0x49
#define SDW_SCP_KEEPEREN 0x4A
#define SDW_SCP_BANKDELAY 0x4B
+#define SDW_SCP_COMMIT 0x4C
+
+#define SDW_SCP_BUS_CLOCK_BASE 0x4D
+#define SDW_SCP_BASE_CLOCK_FREQ GENMASK(2, 0)
+#define SDW_SCP_BASE_CLOCK_UNKNOWN 0x0
+#define SDW_SCP_BASE_CLOCK_19200000_HZ 0x1
+#define SDW_SCP_BASE_CLOCK_24000000_HZ 0x2
+#define SDW_SCP_BASE_CLOCK_24576000_HZ 0x3
+#define SDW_SCP_BASE_CLOCK_22579200_HZ 0x4
+#define SDW_SCP_BASE_CLOCK_32000000_HZ 0x5
+#define SDW_SCP_BASE_CLOCK_RESERVED 0x6
+#define SDW_SCP_BASE_CLOCK_IMP_DEF 0x7
+
+/* 0x4E is not allocated in SoundWire specification 1.2 */
#define SDW_SCP_TESTMODE 0x4F
#define SDW_SCP_DEVID_0 0x50
#define SDW_SCP_DEVID_1 0x51
@@ -114,12 +130,111 @@
#define SDW_SCP_DEVID_4 0x54
#define SDW_SCP_DEVID_5 0x55
+/* Both INT and STATUS register are same */
+#define SDW_SCP_SDCA_INT1 0x58
+#define SDW_SCP_SDCA_INT_SDCA_0 BIT(0)
+#define SDW_SCP_SDCA_INT_SDCA_1 BIT(1)
+#define SDW_SCP_SDCA_INT_SDCA_2 BIT(2)
+#define SDW_SCP_SDCA_INT_SDCA_3 BIT(3)
+#define SDW_SCP_SDCA_INT_SDCA_4 BIT(4)
+#define SDW_SCP_SDCA_INT_SDCA_5 BIT(5)
+#define SDW_SCP_SDCA_INT_SDCA_6 BIT(6)
+#define SDW_SCP_SDCA_INT_SDCA_7 BIT(7)
+
+#define SDW_SCP_SDCA_INT2 0x59
+#define SDW_SCP_SDCA_INT_SDCA_8 BIT(0)
+#define SDW_SCP_SDCA_INT_SDCA_9 BIT(1)
+#define SDW_SCP_SDCA_INT_SDCA_10 BIT(2)
+#define SDW_SCP_SDCA_INT_SDCA_11 BIT(3)
+#define SDW_SCP_SDCA_INT_SDCA_12 BIT(4)
+#define SDW_SCP_SDCA_INT_SDCA_13 BIT(5)
+#define SDW_SCP_SDCA_INT_SDCA_14 BIT(6)
+#define SDW_SCP_SDCA_INT_SDCA_15 BIT(7)
+
+#define SDW_SCP_SDCA_INT3 0x5A
+#define SDW_SCP_SDCA_INT_SDCA_16 BIT(0)
+#define SDW_SCP_SDCA_INT_SDCA_17 BIT(1)
+#define SDW_SCP_SDCA_INT_SDCA_18 BIT(2)
+#define SDW_SCP_SDCA_INT_SDCA_19 BIT(3)
+#define SDW_SCP_SDCA_INT_SDCA_20 BIT(4)
+#define SDW_SCP_SDCA_INT_SDCA_21 BIT(5)
+#define SDW_SCP_SDCA_INT_SDCA_22 BIT(6)
+#define SDW_SCP_SDCA_INT_SDCA_23 BIT(7)
+
+#define SDW_SCP_SDCA_INT4 0x5B
+#define SDW_SCP_SDCA_INT_SDCA_24 BIT(0)
+#define SDW_SCP_SDCA_INT_SDCA_25 BIT(1)
+#define SDW_SCP_SDCA_INT_SDCA_26 BIT(2)
+#define SDW_SCP_SDCA_INT_SDCA_27 BIT(3)
+#define SDW_SCP_SDCA_INT_SDCA_28 BIT(4)
+#define SDW_SCP_SDCA_INT_SDCA_29 BIT(5)
+#define SDW_SCP_SDCA_INT_SDCA_30 BIT(6)
+/* BIT(7) not allocated in SoundWire 1.2 specification */
+
+#define SDW_SCP_SDCA_INTMASK1 0x5C
+#define SDW_SCP_SDCA_INTMASK_SDCA_0 BIT(0)
+#define SDW_SCP_SDCA_INTMASK_SDCA_1 BIT(1)
+#define SDW_SCP_SDCA_INTMASK_SDCA_2 BIT(2)
+#define SDW_SCP_SDCA_INTMASK_SDCA_3 BIT(3)
+#define SDW_SCP_SDCA_INTMASK_SDCA_4 BIT(4)
+#define SDW_SCP_SDCA_INTMASK_SDCA_5 BIT(5)
+#define SDW_SCP_SDCA_INTMASK_SDCA_6 BIT(6)
+#define SDW_SCP_SDCA_INTMASK_SDCA_7 BIT(7)
+
+#define SDW_SCP_SDCA_INTMASK2 0x5D
+#define SDW_SCP_SDCA_INTMASK_SDCA_8 BIT(0)
+#define SDW_SCP_SDCA_INTMASK_SDCA_9 BIT(1)
+#define SDW_SCP_SDCA_INTMASK_SDCA_10 BIT(2)
+#define SDW_SCP_SDCA_INTMASK_SDCA_11 BIT(3)
+#define SDW_SCP_SDCA_INTMASK_SDCA_12 BIT(4)
+#define SDW_SCP_SDCA_INTMASK_SDCA_13 BIT(5)
+#define SDW_SCP_SDCA_INTMASK_SDCA_14 BIT(6)
+#define SDW_SCP_SDCA_INTMASK_SDCA_15 BIT(7)
+
+#define SDW_SCP_SDCA_INTMASK3 0x5E
+#define SDW_SCP_SDCA_INTMASK_SDCA_16 BIT(0)
+#define SDW_SCP_SDCA_INTMASK_SDCA_17 BIT(1)
+#define SDW_SCP_SDCA_INTMASK_SDCA_18 BIT(2)
+#define SDW_SCP_SDCA_INTMASK_SDCA_19 BIT(3)
+#define SDW_SCP_SDCA_INTMASK_SDCA_20 BIT(4)
+#define SDW_SCP_SDCA_INTMASK_SDCA_21 BIT(5)
+#define SDW_SCP_SDCA_INTMASK_SDCA_22 BIT(6)
+#define SDW_SCP_SDCA_INTMASK_SDCA_23 BIT(7)
+
+#define SDW_SCP_SDCA_INTMASK4 0x5F
+#define SDW_SCP_SDCA_INTMASK_SDCA_24 BIT(0)
+#define SDW_SCP_SDCA_INTMASK_SDCA_25 BIT(1)
+#define SDW_SCP_SDCA_INTMASK_SDCA_26 BIT(2)
+#define SDW_SCP_SDCA_INTMASK_SDCA_27 BIT(3)
+#define SDW_SCP_SDCA_INTMASK_SDCA_28 BIT(4)
+#define SDW_SCP_SDCA_INTMASK_SDCA_29 BIT(5)
+#define SDW_SCP_SDCA_INTMASK_SDCA_30 BIT(6)
+/* BIT(7) not allocated in SoundWire 1.2 specification */
+
/* Banked Registers */
#define SDW_SCP_FRAMECTRL_B0 0x60
#define SDW_SCP_FRAMECTRL_B1 (0x60 + SDW_BANK1_OFFSET)
#define SDW_SCP_NEXTFRAME_B0 0x61
#define SDW_SCP_NEXTFRAME_B1 (0x61 + SDW_BANK1_OFFSET)
+#define SDW_SCP_BUSCLOCK_SCALE_B0 0x62
+#define SDW_SCP_BUSCLOCK_SCALE_B1 (0x62 + SDW_BANK1_OFFSET)
+#define SDW_SCP_CLOCK_SCALE GENMASK(3, 0)
+
+/* PHY registers - CTRL and STAT are the same address */
+#define SDW_SCP_PHY_OUT_CTRL_0 0x80
+#define SDW_SCP_PHY_OUT_CTRL_1 0x81
+#define SDW_SCP_PHY_OUT_CTRL_2 0x82
+#define SDW_SCP_PHY_OUT_CTRL_3 0x83
+#define SDW_SCP_PHY_OUT_CTRL_4 0x84
+#define SDW_SCP_PHY_OUT_CTRL_5 0x85
+#define SDW_SCP_PHY_OUT_CTRL_6 0x86
+#define SDW_SCP_PHY_OUT_CTRL_7 0x87
+
+#define SDW_SCP_CAP_LOAD_CTRL GENMASK(2, 0)
+#define SDW_SCP_DRIVE_STRENGTH_CTRL GENMASK(5, 3)
+#define SDW_SCP_SLEW_TIME_CTRL GENMASK(7, 6)
+
/* Both INT and STATUS register is same */
#define SDW_DPN_INT(n) (0x0 + SDW_DPN_SIZE * (n))
#define SDW_DPN_INTMASK(n) (0x1 + SDW_DPN_SIZE * (n))
diff --git a/include/linux/vbox_utils.h b/include/linux/vbox_utils.h
index ff56c443180c..db8a7d118093 100644
--- a/include/linux/vbox_utils.h
+++ b/include/linux/vbox_utils.h
@@ -16,6 +16,7 @@ struct vbg_dev;
__printf(1, 2) void vbg_info(const char *fmt, ...);
__printf(1, 2) void vbg_warn(const char *fmt, ...);
__printf(1, 2) void vbg_err(const char *fmt, ...);
+__printf(1, 2) void vbg_err_ratelimited(const char *fmt, ...);
/* Only use backdoor logging for non-dynamic debug builds */
#if defined(DEBUG) && !defined(CONFIG_DYNAMIC_DEBUG)
diff --git a/include/linux/vmw_vmci_defs.h b/include/linux/vmw_vmci_defs.h
index fefb5292403b..be0afe6f379b 100644
--- a/include/linux/vmw_vmci_defs.h
+++ b/include/linux/vmw_vmci_defs.h
@@ -159,7 +159,7 @@ static inline bool vmci_handle_is_invalid(struct vmci_handle h)
*/
#define VMCI_ANON_SRC_CONTEXT_ID VMCI_INVALID_ID
#define VMCI_ANON_SRC_RESOURCE_ID VMCI_INVALID_ID
-static const struct vmci_handle VMCI_ANON_SRC_HANDLE = {
+static const struct vmci_handle __maybe_unused VMCI_ANON_SRC_HANDLE = {
.context = VMCI_ANON_SRC_CONTEXT_ID,
.resource = VMCI_ANON_SRC_RESOURCE_ID
};
diff --git a/include/uapi/linux/android/binder.h b/include/uapi/linux/android/binder.h
index 2832134e5397..f1ce2c4c077e 100644
--- a/include/uapi/linux/android/binder.h
+++ b/include/uapi/linux/android/binder.h
@@ -404,7 +404,7 @@ enum binder_driver_return_protocol {
BR_FAILED_REPLY = _IO('r', 17),
/*
- * The the last transaction (either a bcTRANSACTION or
+ * The last transaction (either a bcTRANSACTION or
* a bcATTEMPT_ACQUIRE) failed (e.g. out of memory). No parameters.
*/
};
diff --git a/include/uapi/linux/fpga-dfl.h b/include/uapi/linux/fpga-dfl.h
index ec70a0746e59..1621b077bf21 100644
--- a/include/uapi/linux/fpga-dfl.h
+++ b/include/uapi/linux/fpga-dfl.h
@@ -151,6 +151,65 @@ struct dfl_fpga_port_dma_unmap {
#define DFL_FPGA_PORT_DMA_UNMAP _IO(DFL_FPGA_MAGIC, DFL_PORT_BASE + 4)
+/**
+ * struct dfl_fpga_irq_set - the argument for DFL_FPGA_XXX_SET_IRQ ioctl.
+ *
+ * @start: Index of the first irq.
+ * @count: The number of eventfd handler.
+ * @evtfds: Eventfd handlers.
+ */
+struct dfl_fpga_irq_set {
+ __u32 start;
+ __u32 count;
+ __s32 evtfds[];
+};
+
+/**
+ * DFL_FPGA_PORT_ERR_GET_IRQ_NUM - _IOR(DFL_FPGA_MAGIC, DFL_PORT_BASE + 5,
+ * __u32 num_irqs)
+ *
+ * Get the number of irqs supported by the fpga port error reporting private
+ * feature. Currently hardware supports up to 1 irq.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_PORT_ERR_GET_IRQ_NUM _IOR(DFL_FPGA_MAGIC, \
+ DFL_PORT_BASE + 5, __u32)
+
+/**
+ * DFL_FPGA_PORT_ERR_SET_IRQ - _IOW(DFL_FPGA_MAGIC, DFL_PORT_BASE + 6,
+ * struct dfl_fpga_irq_set)
+ *
+ * Set fpga port error reporting interrupt trigger if evtfds[n] is valid.
+ * Unset related interrupt trigger if evtfds[n] is a negative value.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_PORT_ERR_SET_IRQ _IOW(DFL_FPGA_MAGIC, \
+ DFL_PORT_BASE + 6, \
+ struct dfl_fpga_irq_set)
+
+/**
+ * DFL_FPGA_PORT_UINT_GET_IRQ_NUM - _IOR(DFL_FPGA_MAGIC, DFL_PORT_BASE + 7,
+ * __u32 num_irqs)
+ *
+ * Get the number of irqs supported by the fpga AFU interrupt private
+ * feature.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_PORT_UINT_GET_IRQ_NUM _IOR(DFL_FPGA_MAGIC, \
+ DFL_PORT_BASE + 7, __u32)
+
+/**
+ * DFL_FPGA_PORT_UINT_SET_IRQ - _IOW(DFL_FPGA_MAGIC, DFL_PORT_BASE + 8,
+ * struct dfl_fpga_irq_set)
+ *
+ * Set fpga AFU interrupt trigger if evtfds[n] is valid.
+ * Unset related interrupt trigger if evtfds[n] is a negative value.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_PORT_UINT_SET_IRQ _IOW(DFL_FPGA_MAGIC, \
+ DFL_PORT_BASE + 8, \
+ struct dfl_fpga_irq_set)
+
/* IOCTLs for FME file descriptor */
/**
@@ -194,4 +253,27 @@ struct dfl_fpga_fme_port_pr {
*/
#define DFL_FPGA_FME_PORT_ASSIGN _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 2, int)
+/**
+ * DFL_FPGA_FME_ERR_GET_IRQ_NUM - _IOR(DFL_FPGA_MAGIC, DFL_FME_BASE + 3,
+ * __u32 num_irqs)
+ *
+ * Get the number of irqs supported by the fpga fme error reporting private
+ * feature. Currently hardware supports up to 1 irq.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_FME_ERR_GET_IRQ_NUM _IOR(DFL_FPGA_MAGIC, \
+ DFL_FME_BASE + 3, __u32)
+
+/**
+ * DFL_FPGA_FME_ERR_SET_IRQ - _IOW(DFL_FPGA_MAGIC, DFL_FME_BASE + 4,
+ * struct dfl_fpga_irq_set)
+ *
+ * Set fpga fme error reporting interrupt trigger if evtfds[n] is valid.
+ * Unset related interrupt trigger if evtfds[n] is a negative value.
+ * Return: 0 on success, -errno on failure.
+ */
+#define DFL_FPGA_FME_ERR_SET_IRQ _IOW(DFL_FPGA_MAGIC, \
+ DFL_FME_BASE + 4, \
+ struct dfl_fpga_irq_set)
+
#endif /* _UAPI_LINUX_FPGA_DFL_H */
diff --git a/include/uapi/linux/raw.h b/include/uapi/linux/raw.h
index dc96dda479d6..47874919d0b9 100644
--- a/include/uapi/linux/raw.h
+++ b/include/uapi/linux/raw.h
@@ -14,6 +14,4 @@ struct raw_config_request
__u64 block_minor;
};
-#define MAX_RAW_MINORS CONFIG_MAX_RAW_DEVS
-
#endif /* __LINUX_RAW_H */
diff --git a/include/uapi/linux/vbox_vmmdev_types.h b/include/uapi/linux/vbox_vmmdev_types.h
index c27289fd619a..f8a8d6b3c521 100644
--- a/include/uapi/linux/vbox_vmmdev_types.h
+++ b/include/uapi/linux/vbox_vmmdev_types.h
@@ -63,6 +63,7 @@ enum vmmdev_request_type {
VMMDEVREQ_SET_GUEST_CAPABILITIES = 56,
VMMDEVREQ_VIDEMODE_SUPPORTED2 = 57, /* since version 3.2.0 */
VMMDEVREQ_GET_DISPLAY_CHANGE_REQEX = 80, /* since version 4.2.4 */
+ VMMDEVREQ_GET_DISPLAY_CHANGE_REQ_MULTI = 81,
VMMDEVREQ_HGCM_CONNECT = 60,
VMMDEVREQ_HGCM_DISCONNECT = 61,
VMMDEVREQ_HGCM_CALL32 = 62,
@@ -92,6 +93,8 @@ enum vmmdev_request_type {
VMMDEVREQ_WRITE_COREDUMP = 218,
VMMDEVREQ_GUEST_HEARTBEAT = 219,
VMMDEVREQ_HEARTBEAT_CONFIGURE = 220,
+ VMMDEVREQ_NT_BUG_CHECK = 221,
+ VMMDEVREQ_VIDEO_UPDATE_MONITOR_POSITIONS = 222,
/* Ensure the enum is a 32 bit data-type */
VMMDEVREQ_SIZEHACK = 0x7fffffff
};
diff --git a/include/uapi/linux/vboxguest.h b/include/uapi/linux/vboxguest.h
index f79d7abe27db..15125f6ec60d 100644
--- a/include/uapi/linux/vboxguest.h
+++ b/include/uapi/linux/vboxguest.h
@@ -257,6 +257,30 @@ VMMDEV_ASSERT_SIZE(vbg_ioctl_change_filter, 24 + 8);
_IOWR('V', 12, struct vbg_ioctl_change_filter)
+/** VBG_IOCTL_ACQUIRE_GUEST_CAPABILITIES data structure. */
+struct vbg_ioctl_acquire_guest_caps {
+ /** The header. */
+ struct vbg_ioctl_hdr hdr;
+ union {
+ struct {
+ /** Flags (VBGL_IOC_AGC_FLAGS_XXX). */
+ __u32 flags;
+ /** Capabilities to set (VMMDEV_GUEST_SUPPORTS_XXX). */
+ __u32 or_mask;
+ /** Capabilities to drop (VMMDEV_GUEST_SUPPORTS_XXX). */
+ __u32 not_mask;
+ } in;
+ } u;
+};
+VMMDEV_ASSERT_SIZE(vbg_ioctl_acquire_guest_caps, 24 + 12);
+
+#define VBGL_IOC_AGC_FLAGS_CONFIG_ACQUIRE_MODE 0x00000001
+#define VBGL_IOC_AGC_FLAGS_VALID_MASK 0x00000001
+
+#define VBG_IOCTL_ACQUIRE_GUEST_CAPABILITIES \
+ _IOWR('V', 13, struct vbg_ioctl_acquire_guest_caps)
+
+
/** VBG_IOCTL_CHANGE_GUEST_CAPABILITIES data structure. */
struct vbg_ioctl_set_guest_caps {
/** The header. */
diff --git a/include/uapi/misc/habanalabs.h b/include/uapi/misc/habanalabs.h
index f6267a8d7416..d5c4f983b7a8 100644
--- a/include/uapi/misc/habanalabs.h
+++ b/include/uapi/misc/habanalabs.h
@@ -263,6 +263,7 @@ enum hl_device_status {
* time the driver was loaded.
* HL_INFO_TIME_SYNC - Retrieve the device's time alongside the host's time
* for synchronization.
+ * HL_INFO_CS_COUNTERS - Retrieve command submission counters
*/
#define HL_INFO_HW_IP_INFO 0
#define HL_INFO_HW_EVENTS 1
@@ -274,6 +275,7 @@ enum hl_device_status {
#define HL_INFO_CLK_RATE 8
#define HL_INFO_RESET_COUNT 9
#define HL_INFO_TIME_SYNC 10
+#define HL_INFO_CS_COUNTERS 11
#define HL_INFO_VERSION_MAX_LEN 128
#define HL_INFO_CARD_NAME_MAX_LEN 16
@@ -338,6 +340,25 @@ struct hl_info_time_sync {
__u64 host_time;
};
+/**
+ * struct hl_info_cs_counters - command submission counters
+ * @out_of_mem_drop_cnt: dropped due to memory allocation issue
+ * @parsing_drop_cnt: dropped due to error in packet parsing
+ * @queue_full_drop_cnt: dropped due to queue full
+ * @device_in_reset_drop_cnt: dropped due to device in reset
+ */
+struct hl_cs_counters {
+ __u64 out_of_mem_drop_cnt;
+ __u64 parsing_drop_cnt;
+ __u64 queue_full_drop_cnt;
+ __u64 device_in_reset_drop_cnt;
+};
+
+struct hl_info_cs_counters {
+ struct hl_cs_counters cs_counters;
+ struct hl_cs_counters ctx_cs_counters;
+};
+
struct hl_info_args {
/* Location of relevant struct in userspace */
__u64 return_pointer;
@@ -530,13 +551,13 @@ union hl_wait_cs_args {
struct hl_wait_cs_out out;
};
-/* Opcode to alloc device memory */
+/* Opcode to allocate device memory */
#define HL_MEM_OP_ALLOC 0
/* Opcode to free previously allocated device memory */
#define HL_MEM_OP_FREE 1
-/* Opcode to map host memory */
+/* Opcode to map host and device memory */
#define HL_MEM_OP_MAP 2
-/* Opcode to unmap previously mapped host memory */
+/* Opcode to unmap previously mapped host and device memory */
#define HL_MEM_OP_UNMAP 3
/* Memory flags */
diff --git a/kernel/module.c b/kernel/module.c
index aa183c9ac0a2..e7b4ff7e4fd0 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -3237,7 +3237,7 @@ static int find_module_sections(struct module *mod, struct load_info *info)
if (section_addr(info, "__obsparm"))
pr_warn("%s: Ignoring obsolete parameters\n", mod->name);
- info->debug = section_objs(info, "__verbose",
+ info->debug = section_objs(info, "__dyndbg",
sizeof(*info->debug), &info->num_debug);
return 0;
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 321437bbf87d..1d012e597cc3 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -11,7 +11,7 @@
* Copyright (C) 2013 Du, Changbin <changbin.du@gmail.com>
*/
-#define pr_fmt(fmt) KBUILD_MODNAME ":%s: " fmt, __func__
+#define pr_fmt(fmt) "dyndbg: " fmt
#include <linux/kernel.h>
#include <linux/module.h>
@@ -39,8 +39,8 @@
#include <rdma/ib_verbs.h>
-extern struct _ddebug __start___verbose[];
-extern struct _ddebug __stop___verbose[];
+extern struct _ddebug __start___dyndbg[];
+extern struct _ddebug __stop___dyndbg[];
struct ddebug_table {
struct list_head link;
@@ -62,6 +62,11 @@ struct ddebug_iter {
unsigned int idx;
};
+struct flag_settings {
+ unsigned int flags;
+ unsigned int mask;
+};
+
static DEFINE_MUTEX(ddebug_lock);
static LIST_HEAD(ddebug_tables);
static int verbose;
@@ -87,30 +92,33 @@ static struct { unsigned flag:8; char opt_char; } opt_array[] = {
{ _DPRINTK_FLAGS_NONE, '_' },
};
+struct flagsbuf { char buf[ARRAY_SIZE(opt_array)+1]; };
+
/* format a string into buf[] which describes the _ddebug's flags */
-static char *ddebug_describe_flags(struct _ddebug *dp, char *buf,
- size_t maxlen)
+static char *ddebug_describe_flags(unsigned int flags, struct flagsbuf *fb)
{
- char *p = buf;
+ char *p = fb->buf;
int i;
- BUG_ON(maxlen < 6);
for (i = 0; i < ARRAY_SIZE(opt_array); ++i)
- if (dp->flags & opt_array[i].flag)
+ if (flags & opt_array[i].flag)
*p++ = opt_array[i].opt_char;
- if (p == buf)
+ if (p == fb->buf)
*p++ = '_';
*p = '\0';
- return buf;
+ return fb->buf;
}
-#define vpr_info(fmt, ...) \
+#define vnpr_info(lvl, fmt, ...) \
do { \
- if (verbose) \
+ if (verbose >= lvl) \
pr_info(fmt, ##__VA_ARGS__); \
} while (0)
+#define vpr_info(fmt, ...) vnpr_info(1, fmt, ##__VA_ARGS__)
+#define v2pr_info(fmt, ...) vnpr_info(2, fmt, ##__VA_ARGS__)
+
static void vpr_info_dq(const struct ddebug_query *query, const char *msg)
{
/* trim any trailing newlines */
@@ -124,10 +132,10 @@ static void vpr_info_dq(const struct ddebug_query *query, const char *msg)
vpr_info("%s: func=\"%s\" file=\"%s\" module=\"%s\" format=\"%.*s\" lineno=%u-%u\n",
msg,
- query->function ? query->function : "",
- query->filename ? query->filename : "",
- query->module ? query->module : "",
- fmtlen, query->format ? query->format : "",
+ query->function ?: "",
+ query->filename ?: "",
+ query->module ?: "",
+ fmtlen, query->format ?: "",
query->first_lineno, query->last_lineno);
}
@@ -138,13 +146,13 @@ static void vpr_info_dq(const struct ddebug_query *query, const char *msg)
* logs the changes. Takes ddebug_lock.
*/
static int ddebug_change(const struct ddebug_query *query,
- unsigned int flags, unsigned int mask)
+ struct flag_settings *modifiers)
{
int i;
struct ddebug_table *dt;
unsigned int newflags;
unsigned int nfound = 0;
- char flagbuf[10];
+ struct flagsbuf fbuf;
/* search for matching ddebugs */
mutex_lock(&ddebug_lock);
@@ -173,9 +181,16 @@ static int ddebug_change(const struct ddebug_query *query,
continue;
/* match against the format */
- if (query->format &&
- !strstr(dp->format, query->format))
- continue;
+ if (query->format) {
+ if (*query->format == '^') {
+ char *p;
+ /* anchored search. match must be at beginning */
+ p = strstr(dp->format, query->format+1);
+ if (p != dp->format)
+ continue;
+ } else if (!strstr(dp->format, query->format))
+ continue;
+ }
/* match against the line number range */
if (query->first_lineno &&
@@ -187,22 +202,21 @@ static int ddebug_change(const struct ddebug_query *query,
nfound++;
- newflags = (dp->flags & mask) | flags;
+ newflags = (dp->flags & modifiers->mask) | modifiers->flags;
if (newflags == dp->flags)
continue;
#ifdef CONFIG_JUMP_LABEL
if (dp->flags & _DPRINTK_FLAGS_PRINT) {
- if (!(flags & _DPRINTK_FLAGS_PRINT))
+ if (!(modifiers->flags & _DPRINTK_FLAGS_PRINT))
static_branch_disable(&dp->key.dd_key_true);
- } else if (flags & _DPRINTK_FLAGS_PRINT)
+ } else if (modifiers->flags & _DPRINTK_FLAGS_PRINT)
static_branch_enable(&dp->key.dd_key_true);
#endif
dp->flags = newflags;
- vpr_info("changed %s:%d [%s]%s =%s\n",
+ v2pr_info("changed %s:%d [%s]%s =%s\n",
trim_prefix(dp->filename), dp->lineno,
dt->mod_name, dp->function,
- ddebug_describe_flags(dp, flagbuf,
- sizeof(flagbuf)));
+ ddebug_describe_flags(dp->flags, &fbuf));
}
}
mutex_unlock(&ddebug_lock);
@@ -289,6 +303,41 @@ static inline int parse_lineno(const char *str, unsigned int *val)
return 0;
}
+static int parse_linerange(struct ddebug_query *query, const char *first)
+{
+ char *last = strchr(first, '-');
+
+ if (query->first_lineno || query->last_lineno) {
+ pr_err("match-spec: line used 2x\n");
+ return -EINVAL;
+ }
+ if (last)
+ *last++ = '\0';
+ if (parse_lineno(first, &query->first_lineno) < 0)
+ return -EINVAL;
+ if (last) {
+ /* range <first>-<last> */
+ if (parse_lineno(last, &query->last_lineno) < 0)
+ return -EINVAL;
+
+ /* special case for last lineno not specified */
+ if (query->last_lineno == 0)
+ query->last_lineno = UINT_MAX;
+
+ if (query->last_lineno < query->first_lineno) {
+ pr_err("last-line:%d < 1st-line:%d\n",
+ query->last_lineno,
+ query->first_lineno);
+ return -EINVAL;
+ }
+ } else {
+ query->last_lineno = query->first_lineno;
+ }
+ vpr_info("parsed line %d-%d\n", query->first_lineno,
+ query->last_lineno);
+ return 0;
+}
+
static int check_set(const char **dest, char *src, char *name)
{
int rc = 0;
@@ -304,7 +353,8 @@ static int check_set(const char **dest, char *src, char *name)
/*
* Parse words[] as a ddebug query specification, which is a series
- * of (keyword, value) pairs chosen from these possibilities:
+ * of (keyword, value) pairs or combined keyword=value terms,
+ * chosen from these possibilities:
*
* func <function-name>
* file <full-pathname>
@@ -322,61 +372,62 @@ static int ddebug_parse_query(char *words[], int nwords,
{
unsigned int i;
int rc = 0;
-
- /* check we have an even number of words */
- if (nwords % 2 != 0) {
- pr_err("expecting pairs of match-spec <value>\n");
- return -EINVAL;
- }
- memset(query, 0, sizeof(*query));
+ char *fline;
+ char *keyword, *arg;
if (modname)
/* support $modname.dyndbg=<multiple queries> */
query->module = modname;
- for (i = 0; i < nwords; i += 2) {
- if (!strcmp(words[i], "func")) {
- rc = check_set(&query->function, words[i+1], "func");
- } else if (!strcmp(words[i], "file")) {
- rc = check_set(&query->filename, words[i+1], "file");
- } else if (!strcmp(words[i], "module")) {
- rc = check_set(&query->module, words[i+1], "module");
- } else if (!strcmp(words[i], "format")) {
- string_unescape_inplace(words[i+1], UNESCAPE_SPACE |
- UNESCAPE_OCTAL |
- UNESCAPE_SPECIAL);
- rc = check_set(&query->format, words[i+1], "format");
- } else if (!strcmp(words[i], "line")) {
- char *first = words[i+1];
- char *last = strchr(first, '-');
- if (query->first_lineno || query->last_lineno) {
- pr_err("match-spec: line used 2x\n");
+ for (i = 0; i < nwords; i++) {
+ /* accept keyword=arg */
+ vpr_info("%d w:%s\n", i, words[i]);
+
+ keyword = words[i];
+ arg = strchr(keyword, '=');
+ if (arg) {
+ *arg++ = '\0';
+ } else {
+ i++; /* next word is arg */
+ if (!(i < nwords)) {
+ pr_err("missing arg to keyword: %s\n", keyword);
return -EINVAL;
}
- if (last)
- *last++ = '\0';
- if (parse_lineno(first, &query->first_lineno) < 0)
- return -EINVAL;
- if (last) {
- /* range <first>-<last> */
- if (parse_lineno(last, &query->last_lineno) < 0)
- return -EINVAL;
+ arg = words[i];
+ }
+ vpr_info("%d key:%s arg:%s\n", i, keyword, arg);
- /* special case for last lineno not specified */
- if (query->last_lineno == 0)
- query->last_lineno = UINT_MAX;
+ if (!strcmp(keyword, "func")) {
+ rc = check_set(&query->function, arg, "func");
+ } else if (!strcmp(keyword, "file")) {
+ if (check_set(&query->filename, arg, "file"))
+ return -EINVAL;
- if (query->last_lineno < query->first_lineno) {
- pr_err("last-line:%d < 1st-line:%d\n",
- query->last_lineno,
- query->first_lineno);
+ /* tail :$info is function or line-range */
+ fline = strchr(query->filename, ':');
+ if (!fline)
+ break;
+ *fline++ = '\0';
+ if (isalpha(*fline) || *fline == '*' || *fline == '?') {
+ /* take as function name */
+ if (check_set(&query->function, fline, "func"))
return -EINVAL;
- }
} else {
- query->last_lineno = query->first_lineno;
+ if (parse_linerange(query, fline))
+ return -EINVAL;
}
+ } else if (!strcmp(keyword, "module")) {
+ rc = check_set(&query->module, arg, "module");
+ } else if (!strcmp(keyword, "format")) {
+ string_unescape_inplace(arg, UNESCAPE_SPACE |
+ UNESCAPE_OCTAL |
+ UNESCAPE_SPECIAL);
+ rc = check_set(&query->format, arg, "format");
+ } else if (!strcmp(keyword, "line")) {
+ if (parse_linerange(query, arg))
+ return -EINVAL;
} else {
- pr_err("unknown keyword \"%s\"\n", words[i]);
+ pr_err("unknown keyword \"%s\"\n", keyword);
return -EINVAL;
}
if (rc)
@@ -392,11 +443,9 @@ static int ddebug_parse_query(char *words[], int nwords,
* flags fields of matched _ddebug's. Returns 0 on success
* or <0 on error.
*/
-static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
- unsigned int *maskp)
+static int ddebug_parse_flags(const char *str, struct flag_settings *modifiers)
{
- unsigned flags = 0;
- int op = '=', i;
+ int op, i;
switch (*str) {
case '+':
@@ -413,40 +462,40 @@ static int ddebug_parse_flags(const char *str, unsigned int *flagsp,
for (; *str ; ++str) {
for (i = ARRAY_SIZE(opt_array) - 1; i >= 0; i--) {
if (*str == opt_array[i].opt_char) {
- flags |= opt_array[i].flag;
+ modifiers->flags |= opt_array[i].flag;
break;
}
}
if (i < 0) {
- pr_err("unknown flag '%c' in \"%s\"\n", *str, str);
+ pr_err("unknown flag '%c'\n", *str);
return -EINVAL;
}
}
- vpr_info("flags=0x%x\n", flags);
+ vpr_info("flags=0x%x\n", modifiers->flags);
- /* calculate final *flagsp, *maskp according to mask and op */
+ /* calculate final flags, mask based upon op */
switch (op) {
case '=':
- *maskp = 0;
- *flagsp = flags;
+ /* modifiers->flags already set */
+ modifiers->mask = 0;
break;
case '+':
- *maskp = ~0U;
- *flagsp = flags;
+ modifiers->mask = ~0U;
break;
case '-':
- *maskp = ~flags;
- *flagsp = 0;
+ modifiers->mask = ~modifiers->flags;
+ modifiers->flags = 0;
break;
}
- vpr_info("*flagsp=0x%x *maskp=0x%x\n", *flagsp, *maskp);
+ vpr_info("*flagsp=0x%x *maskp=0x%x\n", modifiers->flags, modifiers->mask);
+
return 0;
}
static int ddebug_exec_query(char *query_string, const char *modname)
{
- unsigned int flags = 0, mask = 0;
- struct ddebug_query query;
+ struct flag_settings modifiers = {};
+ struct ddebug_query query = {};
#define MAXWORDS 9
int nwords, nfound;
char *words[MAXWORDS];
@@ -457,7 +506,7 @@ static int ddebug_exec_query(char *query_string, const char *modname)
return -EINVAL;
}
/* check flags 1st (last arg) so query is pairs of spec,val */
- if (ddebug_parse_flags(words[nwords-1], &flags, &mask)) {
+ if (ddebug_parse_flags(words[nwords-1], &modifiers)) {
pr_err("flags parse failed\n");
return -EINVAL;
}
@@ -466,7 +515,7 @@ static int ddebug_exec_query(char *query_string, const char *modname)
return -EINVAL;
}
/* actually go and implement the change */
- nfound = ddebug_change(&query, flags, mask);
+ nfound = ddebug_change(&query, &modifiers);
vpr_info_dq(&query, nfound ? "applied" : "no-match");
return nfound;
@@ -476,7 +525,7 @@ static int ddebug_exec_query(char *query_string, const char *modname)
last error or number of matching callsites. Module name is either
in param (for boot arg) or perhaps in query string.
*/
-static int ddebug_exec_queries(char *query, const char *modname)
+int ddebug_exec_queries(char *query, const char *modname)
{
char *split;
int i, errs = 0, exitcode = 0, rc, nfound = 0;
@@ -508,6 +557,7 @@ static int ddebug_exec_queries(char *query, const char *modname)
return exitcode;
return nfound;
}
+EXPORT_SYMBOL_GPL(ddebug_exec_queries);
#define PREFIX_SIZE 64
@@ -771,8 +821,6 @@ static void *ddebug_proc_start(struct seq_file *m, loff_t *pos)
struct _ddebug *dp;
int n = *pos;
- vpr_info("called m=%p *pos=%lld\n", m, (unsigned long long)*pos);
-
mutex_lock(&ddebug_lock);
if (!n)
@@ -795,9 +843,6 @@ static void *ddebug_proc_next(struct seq_file *m, void *p, loff_t *pos)
struct ddebug_iter *iter = m->private;
struct _ddebug *dp;
- vpr_info("called m=%p p=%p *pos=%lld\n",
- m, p, (unsigned long long)*pos);
-
if (p == SEQ_START_TOKEN)
dp = ddebug_iter_first(iter);
else
@@ -816,9 +861,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
{
struct ddebug_iter *iter = m->private;
struct _ddebug *dp = p;
- char flagsbuf[10];
-
- vpr_info("called m=%p p=%p\n", m, p);
+ struct flagsbuf flags;
if (p == SEQ_START_TOKEN) {
seq_puts(m,
@@ -829,7 +872,7 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
seq_printf(m, "%s:%u [%s]%s =%s \"",
trim_prefix(dp->filename), dp->lineno,
iter->table->mod_name, dp->function,
- ddebug_describe_flags(dp, flagsbuf, sizeof(flagsbuf)));
+ ddebug_describe_flags(dp->flags, &flags));
seq_escape(m, dp->format, "\t\r\n\"");
seq_puts(m, "\"\n");
@@ -842,7 +885,6 @@ static int ddebug_proc_show(struct seq_file *m, void *p)
*/
static void ddebug_proc_stop(struct seq_file *m, void *p)
{
- vpr_info("called m=%p p=%p\n", m, p);
mutex_unlock(&ddebug_lock);
}
@@ -853,13 +895,6 @@ static const struct seq_operations ddebug_proc_seqops = {
.stop = ddebug_proc_stop
};
-/*
- * File_ops->open method for <debugfs>/dynamic_debug/control. Does
- * the seq_file setup dance, and also creates an iterator to walk the
- * _ddebugs. Note that we create a seq_file always, even for O_WRONLY
- * files where it's not needed, as doing so simplifies the ->release
- * method.
- */
static int ddebug_proc_open(struct inode *inode, struct file *file)
{
vpr_info("called\n");
@@ -909,10 +944,10 @@ int ddebug_add_module(struct _ddebug *tab, unsigned int n,
dt->ddebugs = tab;
mutex_lock(&ddebug_lock);
- list_add_tail(&dt->link, &ddebug_tables);
+ list_add(&dt->link, &ddebug_tables);
mutex_unlock(&ddebug_lock);
- vpr_info("%u debug prints in module %s\n", n, dt->mod_name);
+ v2pr_info("%u debug prints in module %s\n", n, dt->mod_name);
return 0;
}
@@ -971,7 +1006,7 @@ int ddebug_remove_module(const char *mod_name)
struct ddebug_table *dt, *nextdt;
int ret = -ENOENT;
- vpr_info("removing module \"%s\"\n", mod_name);
+ v2pr_info("removing module \"%s\"\n", mod_name);
mutex_lock(&ddebug_lock);
list_for_each_entry_safe(dt, nextdt, &ddebug_tables, link) {
@@ -1029,9 +1064,8 @@ static int __init dynamic_debug_init(void)
char *cmdline;
int ret = 0;
int n = 0, entries = 0, modct = 0;
- int verbose_bytes = 0;
- if (&__start___verbose == &__stop___verbose) {
+ if (&__start___dyndbg == &__stop___dyndbg) {
if (IS_ENABLED(CONFIG_DYNAMIC_DEBUG)) {
pr_warn("_ddebug table is empty in a CONFIG_DYNAMIC_DEBUG build\n");
return 1;
@@ -1040,14 +1074,11 @@ static int __init dynamic_debug_init(void)
ddebug_init_success = 1;
return 0;
}
- iter = __start___verbose;
+ iter = __start___dyndbg;
modname = iter->modname;
iter_start = iter;
- for (; iter < __stop___verbose; iter++) {
+ for (; iter < __stop___dyndbg; iter++) {
entries++;
- verbose_bytes += strlen(iter->modname) + strlen(iter->function)
- + strlen(iter->filename) + strlen(iter->format);
-
if (strcmp(modname, iter->modname)) {
modct++;
ret = ddebug_add_module(iter_start, n, modname);
@@ -1064,9 +1095,9 @@ static int __init dynamic_debug_init(void)
goto out_err;
ddebug_init_success = 1;
- vpr_info("%d modules, %d entries and %d bytes in ddebug tables, %d bytes in (readonly) verbose section\n",
+ vpr_info("%d modules, %d entries and %d bytes in ddebug tables, %d bytes in __dyndbg section\n",
modct, entries, (int)(modct * sizeof(struct ddebug_table)),
- verbose_bytes + (int)(__stop___verbose - __start___verbose));
+ (int)(entries * sizeof(struct _ddebug)));
/* apply ddebug_query boot param, dont unload tables on err */
if (ddebug_setup_string[0] != '\0') {
diff --git a/scripts/headers_install.sh b/scripts/headers_install.sh
index 224f51012b6e..cdd66038818c 100755
--- a/scripts/headers_install.sh
+++ b/scripts/headers_install.sh
@@ -90,7 +90,6 @@ include/uapi/linux/elfcore.h:CONFIG_BINFMT_ELF_FDPIC
include/uapi/linux/eventpoll.h:CONFIG_PM_SLEEP
include/uapi/linux/hw_breakpoint.h:CONFIG_HAVE_MIXED_BREAKPOINTS_REGS
include/uapi/linux/pktcdvd.h:CONFIG_CDROM_PKTCDVD_WCACHE
-include/uapi/linux/raw.h:CONFIG_MAX_RAW_DEVS
"
for c in $configs
diff --git a/scripts/mod/devicetable-offsets.c b/scripts/mod/devicetable-offsets.c
index 010be8ba2116..27007c18e754 100644
--- a/scripts/mod/devicetable-offsets.c
+++ b/scripts/mod/devicetable-offsets.c
@@ -216,6 +216,8 @@ int main(void)
DEVID(sdw_device_id);
DEVID_FIELD(sdw_device_id, mfg_id);
DEVID_FIELD(sdw_device_id, part_id);
+ DEVID_FIELD(sdw_device_id, sdw_version);
+ DEVID_FIELD(sdw_device_id, class_id);
DEVID(fsl_mc_device_id);
DEVID_FIELD(fsl_mc_device_id, vendor);
diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c
index 9599e2a3f1e6..2417dd1dee33 100644
--- a/scripts/mod/file2alias.c
+++ b/scripts/mod/file2alias.c
@@ -1258,15 +1258,19 @@ static int do_hda_entry(const char *filename, void *symval, char *alias)
return 1;
}
-/* Looks like: sdw:mNpN */
+/* Looks like: sdw:mNpNvNcN */
static int do_sdw_entry(const char *filename, void *symval, char *alias)
{
DEF_FIELD(symval, sdw_device_id, mfg_id);
DEF_FIELD(symval, sdw_device_id, part_id);
+ DEF_FIELD(symval, sdw_device_id, sdw_version);
+ DEF_FIELD(symval, sdw_device_id, class_id);
strcpy(alias, "sdw:");
ADD(alias, "m", mfg_id != 0, mfg_id);
ADD(alias, "p", part_id != 0, part_id);
+ ADD(alias, "v", sdw_version != 0, sdw_version);
+ ADD(alias, "c", class_id != 0, class_id);
add_wildcard(alias);
return 1;
diff --git a/tools/testing/selftests/lkdtm/run.sh b/tools/testing/selftests/lkdtm/run.sh
index ee64ff8df8f4..8383eb89d88a 100755
--- a/tools/testing/selftests/lkdtm/run.sh
+++ b/tools/testing/selftests/lkdtm/run.sh
@@ -8,6 +8,7 @@
#
set -e
TRIGGER=/sys/kernel/debug/provoke-crash/DIRECT
+CLEAR_ONCE=/sys/kernel/debug/clear_warn_once
KSELFTEST_SKIP_TEST=4
# Verify we have LKDTM available in the kernel.
@@ -67,6 +68,11 @@ cleanup() {
}
trap cleanup EXIT
+# Reset WARN_ONCE counters so we trip it each time this runs.
+if [ -w $CLEAR_ONCE ] ; then
+ echo 1 > $CLEAR_ONCE
+fi
+
# Save existing dmesg so we can detect new content below
dmesg > "$DMESG"
diff --git a/tools/testing/selftests/lkdtm/tests.txt b/tools/testing/selftests/lkdtm/tests.txt
index 92ca32143ae5..9d266e79c6a2 100644
--- a/tools/testing/selftests/lkdtm/tests.txt
+++ b/tools/testing/selftests/lkdtm/tests.txt
@@ -14,6 +14,7 @@ STACK_GUARD_PAGE_LEADING
STACK_GUARD_PAGE_TRAILING
UNSET_SMEP CR4 bits went missing
DOUBLE_FAULT
+CORRUPT_PAC
UNALIGNED_LOAD_STORE_WRITE
#OVERWRITE_ALLOCATION Corrupts memory on failure
#WRITE_AFTER_FREE Corrupts memory on failure