summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/powerpc/boot/Makefile3
-rw-r--r--arch/powerpc/boot/dts/mvme5100.dts185
-rw-r--r--arch/powerpc/boot/mvme5100.c27
-rwxr-xr-xarch/powerpc/boot/wrapper4
-rw-r--r--arch/powerpc/configs/mvme5100_defconfig144
-rw-r--r--arch/powerpc/platforms/embedded6xx/Kconfig13
-rw-r--r--arch/powerpc/platforms/embedded6xx/Makefile1
-rw-r--r--arch/powerpc/platforms/embedded6xx/mvme5100.c221
8 files changed, 596 insertions, 2 deletions
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index ca7f08cc4afd..cd9ea99f9fdc 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -95,7 +95,7 @@ src-plat-$(CONFIG_FSL_SOC_BOOKE) += cuboot-85xx.c cuboot-85xx-cpm2.c
src-plat-$(CONFIG_EMBEDDED6xx) += cuboot-pq2.c cuboot-mpc7448hpc2.c \
cuboot-c2k.c gamecube-head.S \
gamecube.c wii-head.S wii.c holly.c \
- prpmc2800.c
+ prpmc2800.c fixed-head.S mvme5100.c
src-plat-$(CONFIG_AMIGAONE) += cuboot-amigaone.c
src-plat-$(CONFIG_PPC_PS3) += ps3-head.S ps3-hvcall.S ps3.c
src-plat-$(CONFIG_EPAPR_BOOT) += epapr.c epapr-wrapper.c
@@ -286,6 +286,7 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.mpc7448hpc2
image-$(CONFIG_PPC_C2K) += cuImage.c2k
image-$(CONFIG_GAMECUBE) += dtbImage.gamecube
image-$(CONFIG_WII) += dtbImage.wii
+image-$(CONFIG_MVME5100) += dtbImage.mvme5100
# Board port in arch/powerpc/platform/amigaone/Kconfig
image-$(CONFIG_AMIGAONE) += cuImage.amigaone
diff --git a/arch/powerpc/boot/dts/mvme5100.dts b/arch/powerpc/boot/dts/mvme5100.dts
new file mode 100644
index 000000000000..1ecb341a232a
--- /dev/null
+++ b/arch/powerpc/boot/dts/mvme5100.dts
@@ -0,0 +1,185 @@
+/*
+ * Device Tree Source for Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without
+ * any warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "MVME5100";
+ compatible = "MVME5100";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ serial0 = &serial0;
+ pci0 = &pci0;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,7410 {
+ device_type = "cpu";
+ reg = <0x0>;
+ /* Following required by dtc but not used */
+ d-cache-line-size = <32>;
+ i-cache-line-size = <32>;
+ i-cache-size = <32768>;
+ d-cache-size = <32768>;
+ timebase-frequency = <25000000>;
+ clock-frequency = <500000000>;
+ bus-frequency = <100000000>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ hawk@fef80000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "hawk-bridge", "simple-bus";
+ ranges = <0x0 0xfef80000 0x10000>;
+ reg = <0xfef80000 0x10000>;
+
+ serial0: serial@8000 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8000 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ serial1: serial@8200 {
+ device_type = "serial";
+ compatible = "ns16550";
+ reg = <0x8200 0x80>;
+ reg-shift = <4>;
+ clock-frequency = <1843200>;
+ current-speed = <9600>;
+ interrupts = <1 1>; // IRQ1 Level Active Low.
+ interrupt-parent = <&mpic>;
+ };
+
+ mpic: interrupt-controller@f3f80000 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ device_type = "open-pic";
+ compatible = "chrp,open-pic";
+ interrupt-controller;
+ reg = <0xf3f80000 0x40000>;
+ };
+ };
+
+ pci0: pci@feff0000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "hawk-pci";
+ reg = <0xfec00000 0x400000>;
+ 8259-interrupt-acknowledge = <0xfeff0030>;
+ ranges = <0x1000000 0x0 0x0 0xfe000000 0x0 0x800000
+ 0x2000000 0x0 0x80000000 0x80000000 0x0 0x74000000>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupt-parent = <&mpic>;
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map = <
+
+ /*
+ * This definition (IDSEL 11) duplicates the
+ * interrupts definition in the i8259
+ * interrupt controller below.
+ *
+ * Do not change the interrupt sense/polarity from
+ * 0x2 to anything else, doing so will cause endless
+ * "spurious" i8259 interrupts to be fielded.
+ */
+ // IDSEL 11 - iPMC712 PCI/ISA Bridge
+ 0x5800 0x0 0x0 0x1 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x2 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x3 &mpic 0x0 0x2
+ 0x5800 0x0 0x0 0x4 &mpic 0x0 0x2
+
+ /* IDSEL 12 - Not Used */
+
+ /* IDSEL 13 - Universe VME Bridge */
+ 0x6800 0x0 0x0 0x1 &mpic 0x5 0x1
+ 0x6800 0x0 0x0 0x2 &mpic 0x6 0x1
+ 0x6800 0x0 0x0 0x3 &mpic 0x7 0x1
+ 0x6800 0x0 0x0 0x4 &mpic 0x8 0x1
+
+ /* IDSEL 14 - ENET 1 */
+ 0x7000 0x0 0x0 0x1 &mpic 0x2 0x1
+
+ /* IDSEL 15 - Not Used */
+
+ /* IDSEL 16 - PMC Slot 1 */
+ 0x8000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0x8000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0x8000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0x8000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ /* IDSEL 17 - PMC Slot 2 */
+ 0x8800 0x0 0x0 0x1 &mpic 0xc 0x1
+ 0x8800 0x0 0x0 0x2 &mpic 0x9 0x1
+ 0x8800 0x0 0x0 0x3 &mpic 0xa 0x1
+ 0x8800 0x0 0x0 0x4 &mpic 0xb 0x1
+
+ /* IDSEL 18 - Not Used */
+
+ /* IDSEL 19 - ENET 2 */
+ 0x9800 0x0 0x0 0x1 &mpic 0xd 0x1
+
+ /* IDSEL 20 - PMCSPAN (PCI-X) */
+ 0xa000 0x0 0x0 0x1 &mpic 0x9 0x1
+ 0xa000 0x0 0x0 0x2 &mpic 0xa 0x1
+ 0xa000 0x0 0x0 0x3 &mpic 0xb 0x1
+ 0xa000 0x0 0x0 0x4 &mpic 0xc 0x1
+
+ >;
+
+ isa {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ #interrupt-cells = <2>;
+ device_type = "isa";
+ compatible = "isa";
+ ranges = <0x00000001 0 0x01000000 0 0x00000000 0x00001000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ #interrupt-cells = <2>;
+ #address-cells = <0>;
+ interrupts = <0 2>;
+ device_type = "interrupt-controller";
+ compatible = "chrp,iic";
+ interrupt-controller;
+ reg = <1 0x00000020 0x00000002
+ 1 0x000000a0 0x00000002
+ 1 0x000004d0 0x00000002>;
+ interrupt-parent = <&mpic>;
+ };
+
+ };
+
+ };
+
+ chosen {
+ linux,stdout-path = &serial0;
+ };
+
+};
diff --git a/arch/powerpc/boot/mvme5100.c b/arch/powerpc/boot/mvme5100.c
new file mode 100644
index 000000000000..cb865f83c60b
--- /dev/null
+++ b/arch/powerpc/boot/mvme5100.c
@@ -0,0 +1,27 @@
+/*
+ * Motorola/Emerson MVME5100 with PPCBug firmware.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ */
+#include "types.h"
+#include "ops.h"
+#include "io.h"
+
+BSS_STACK(4096);
+
+void platform_init(unsigned long r3, unsigned long r4, unsigned long r5)
+{
+ u32 heapsize;
+
+ heapsize = 0x8000000 - (u32)_end; /* 128M */
+ simple_alloc_init(_end, heapsize, 32, 64);
+ fdt_init(_dtb_start);
+ serial_console_init();
+}
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 2e1af74a64be..d27a25518b01 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -265,6 +265,10 @@ epapr)
link_address='0x20000000'
pie=-pie
;;
+mvme5100)
+ platformo="$object/fixed-head.o $object/mvme5100.o"
+ binary=y
+ ;;
esac
vmz="$tmpdir/`basename \"$kernel\"`.$ext"
diff --git a/arch/powerpc/configs/mvme5100_defconfig b/arch/powerpc/configs/mvme5100_defconfig
new file mode 100644
index 000000000000..93c7752e2dbb
--- /dev/null
+++ b/arch/powerpc/configs/mvme5100_defconfig
@@ -0,0 +1,144 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+# CONFIG_UTS_NS is not set
+# CONFIG_IPC_NS is not set
+# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_PPC_CHRP is not set
+# CONFIG_PPC_PMAC is not set
+CONFIG_EMBEDDED6xx=y
+CONFIG_MVME5100=y
+CONFIG_KVM_GUEST=y
+CONFIG_HZ_100=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_COMPACTION is not set
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,9600 ip=dhcp root=/dev/nfs"
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CT_PROTO_SCTP=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_LAPB=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_EEPROM_LEGACY=m
+CONFIG_NETDEVICES=y
+CONFIG_TUN=m
+# CONFIG_NET_VENDOR_3COM is not set
+CONFIG_E100=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=10
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+# CONFIG_HWMON is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VME_BUS=m
+CONFIG_VME_CA91CX42=m
+CONFIG_EXT2_FS=m
+CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_XFS_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=m
+CONFIG_MSDOS_FS=m
+CONFIG_VFAT_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+CONFIG_CIFS=m
+CONFIG_NLS=y
+CONFIG_NLS_CODEPAGE_437=m
+CONFIG_NLS_CODEPAGE_932=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_T10DIF=y
+CONFIG_XZ_DEC=y
+CONFIG_XZ_DEC_X86=y
+CONFIG_XZ_DEC_IA64=y
+CONFIG_XZ_DEC_ARM=y
+CONFIG_XZ_DEC_ARMTHUMB=y
+CONFIG_XZ_DEC_SPARC=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=20
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA1=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_DES=y
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
diff --git a/arch/powerpc/platforms/embedded6xx/Kconfig b/arch/powerpc/platforms/embedded6xx/Kconfig
index 302ba43d73a1..6d3c7a9fd047 100644
--- a/arch/powerpc/platforms/embedded6xx/Kconfig
+++ b/arch/powerpc/platforms/embedded6xx/Kconfig
@@ -67,6 +67,18 @@ config PPC_C2K
This option enables support for the GE Fanuc C2K board (formerly
an SBS board).
+config MVME5100
+ bool "Motorola/Emerson MVME5100"
+ depends on EMBEDDED6xx
+ select MPIC
+ select PCI
+ select PPC_INDIRECT_PCI
+ select PPC_I8259
+ select PPC_NATIVE
+ help
+ This option enables support for the Motorola (now Emerson) MVME5100
+ board.
+
config TSI108_BRIDGE
bool
select PCI
@@ -113,4 +125,3 @@ config WII
help
Select WII if configuring for the Nintendo Wii.
More information at: <http://gc-linux.sourceforge.net/>
-
diff --git a/arch/powerpc/platforms/embedded6xx/Makefile b/arch/powerpc/platforms/embedded6xx/Makefile
index 66c23e423f40..cdd48d402b93 100644
--- a/arch/powerpc/platforms/embedded6xx/Makefile
+++ b/arch/powerpc/platforms/embedded6xx/Makefile
@@ -11,3 +11,4 @@ obj-$(CONFIG_USBGECKO_UDBG) += usbgecko_udbg.o
obj-$(CONFIG_GAMECUBE_COMMON) += flipper-pic.o
obj-$(CONFIG_GAMECUBE) += gamecube.o
obj-$(CONFIG_WII) += wii.o hlwd-pic.o
+obj-$(CONFIG_MVME5100) += mvme5100.o
diff --git a/arch/powerpc/platforms/embedded6xx/mvme5100.c b/arch/powerpc/platforms/embedded6xx/mvme5100.c
new file mode 100644
index 000000000000..25e3bfb64efb
--- /dev/null
+++ b/arch/powerpc/platforms/embedded6xx/mvme5100.c
@@ -0,0 +1,221 @@
+/*
+ * Board setup routines for the Motorola/Emerson MVME5100.
+ *
+ * Copyright 2013 CSC Australia Pty. Ltd.
+ *
+ * Based on earlier code by:
+ *
+ * Matt Porter, MontaVista Software Inc.
+ * Copyright 2001 MontaVista Software Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * Author: Stephen Chivers <schivers@csc.com>
+ *
+ */
+
+#include <linux/of_platform.h>
+
+#include <asm/i8259.h>
+#include <asm/pci-bridge.h>
+#include <asm/mpic.h>
+#include <asm/prom.h>
+#include <mm/mmu_decl.h>
+#include <asm/udbg.h>
+
+#define HAWK_MPIC_SIZE 0x00040000U
+#define MVME5100_PCI_MEM_OFFSET 0x00000000
+
+/* Board register addresses. */
+#define BOARD_STATUS_REG 0xfef88080
+#define BOARD_MODFAIL_REG 0xfef88090
+#define BOARD_MODRST_REG 0xfef880a0
+#define BOARD_TBEN_REG 0xfef880c0
+#define BOARD_SW_READ_REG 0xfef880e0
+#define BOARD_GEO_ADDR_REG 0xfef880e8
+#define BOARD_EXT_FEATURE1_REG 0xfef880f0
+#define BOARD_EXT_FEATURE2_REG 0xfef88100
+
+static phys_addr_t pci_membase;
+static u_char *restart;
+
+static void mvme5100_8259_cascade(unsigned int irq, struct irq_desc *desc)
+{
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned int cascade_irq = i8259_irq();
+
+ if (cascade_irq != NO_IRQ)
+ generic_handle_irq(cascade_irq);
+
+ chip->irq_eoi(&desc->irq_data);
+}
+
+static void __init mvme5100_pic_init(void)
+{
+ struct mpic *mpic;
+ struct device_node *np;
+ struct device_node *cp = NULL;
+ unsigned int cirq;
+ unsigned long intack = 0;
+ const u32 *prop = NULL;
+
+ np = of_find_node_by_type(NULL, "open-pic");
+ if (!np) {
+ pr_err("Could not find open-pic node\n");
+ return;
+ }
+
+ mpic = mpic_alloc(np, pci_membase, 0, 16, 256, " OpenPIC ");
+
+ BUG_ON(mpic == NULL);
+ of_node_put(np);
+
+ mpic_assign_isu(mpic, 0, pci_membase + 0x10000);
+
+ mpic_init(mpic);
+
+ cp = of_find_compatible_node(NULL, NULL, "chrp,iic");
+ if (cp == NULL) {
+ pr_warn("mvme5100_pic_init: couldn't find i8259\n");
+ return;
+ }
+
+ cirq = irq_of_parse_and_map(cp, 0);
+ if (cirq == NO_IRQ) {
+ pr_warn("mvme5100_pic_init: no cascade interrupt?\n");
+ return;
+ }
+
+ np = of_find_compatible_node(NULL, "pci", "mpc10x-pci");
+ if (np) {
+ prop = of_get_property(np, "8259-interrupt-acknowledge", NULL);
+
+ if (prop)
+ intack = prop[0];
+
+ of_node_put(np);
+ }
+
+ if (intack)
+ pr_debug("mvme5100_pic_init: PCI 8259 intack at 0x%016lx\n",
+ intack);
+
+ i8259_init(cp, intack);
+ of_node_put(cp);
+ irq_set_chained_handler(cirq, mvme5100_8259_cascade);
+}
+
+static int __init mvme5100_add_bridge(struct device_node *dev)
+{
+ const int *bus_range;
+ int len;
+ struct pci_controller *hose;
+ unsigned short devid;
+
+ pr_info("Adding PCI host bridge %s\n", dev->full_name);
+
+ bus_range = of_get_property(dev, "bus-range", &len);
+
+ hose = pcibios_alloc_controller(dev);
+ if (hose == NULL)
+ return -ENOMEM;
+
+ hose->first_busno = bus_range ? bus_range[0] : 0;
+ hose->last_busno = bus_range ? bus_range[1] : 0xff;
+
+ setup_indirect_pci(hose, 0xfe000cf8, 0xfe000cfc, 0);
+
+ pci_process_bridge_OF_ranges(hose, dev, 1);
+
+ early_read_config_word(hose, 0, 0, PCI_DEVICE_ID, &devid);
+
+ if (devid != PCI_DEVICE_ID_MOTOROLA_HAWK) {
+ pr_err("HAWK PHB not present?\n");
+ return 0;
+ }
+
+ early_read_config_dword(hose, 0, 0, PCI_BASE_ADDRESS_1, &pci_membase);
+
+ if (pci_membase == 0) {
+ pr_err("HAWK PHB mibar not correctly set?\n");
+ return 0;
+ }
+
+ pr_info("mvme5100_pic_init: pci_membase: %x\n", pci_membase);
+
+ return 0;
+}
+
+static struct of_device_id mvme5100_of_bus_ids[] __initdata = {
+ { .compatible = "hawk-bridge", },
+ {},
+};
+
+/*
+ * Setup the architecture
+ */
+static void __init mvme5100_setup_arch(void)
+{
+ struct device_node *np;
+
+ if (ppc_md.progress)
+ ppc_md.progress("mvme5100_setup_arch()", 0);
+
+ for_each_compatible_node(np, "pci", "hawk-pci")
+ mvme5100_add_bridge(np);
+
+ restart = ioremap(BOARD_MODRST_REG, 4);
+}
+
+
+static void mvme5100_show_cpuinfo(struct seq_file *m)
+{
+ seq_puts(m, "Vendor\t\t: Motorola/Emerson\n");
+ seq_puts(m, "Machine\t\t: MVME5100\n");
+}
+
+static void mvme5100_restart(char *cmd)
+{
+
+ local_irq_disable();
+ mtmsr(mfmsr() | MSR_IP);
+
+ out_8((u_char *) restart, 0x01);
+
+ while (1)
+ ;
+}
+
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init mvme5100_probe(void)
+{
+ unsigned long root = of_get_flat_dt_root();
+
+ return of_flat_dt_is_compatible(root, "MVME5100");
+}
+
+static int __init probe_of_platform_devices(void)
+{
+
+ of_platform_bus_probe(NULL, mvme5100_of_bus_ids, NULL);
+ return 0;
+}
+
+machine_device_initcall(mvme5100, probe_of_platform_devices);
+
+define_machine(mvme5100) {
+ .name = "MVME5100",
+ .probe = mvme5100_probe,
+ .setup_arch = mvme5100_setup_arch,
+ .init_IRQ = mvme5100_pic_init,
+ .show_cpuinfo = mvme5100_show_cpuinfo,
+ .get_irq = mpic_get_irq,
+ .restart = mvme5100_restart,
+ .calibrate_decr = generic_calibrate_decr,
+ .progress = udbg_progress,
+};